# Rainwood Nutrition — full technical text > Supplier of mineral, vitamin, amino acid and collagen ingredient powders for dietary supplement and functional food manufacturers, with a batch COA and a stated analytical method for every specification. Legal entity: Shaanxi Rainwood Biotech Co., Ltd.. Location: Rm 218, Tangxing Digital Bldg, #6 Tangxing Rd, Xi'an, Shaanxi, China. Contact: info@rainwoodbio.com. Scope: ingredient powders only. No OEM, ODM, private label or finished dosage forms. ## Site map - Home: https://nutrition.rainwoodbio.com/ - Ingredient catalog: https://nutrition.rainwoodbio.com/products/ - Minerals and electrolytes: https://nutrition.rainwoodbio.com/products/minerals/ - Quality and documentation: https://nutrition.rainwoodbio.com/quality/ - About and scope: https://nutrition.rainwoodbio.com/about/ - Editorial policy: https://nutrition.rainwoodbio.com/editorial-policy/ - Privacy: https://nutrition.rainwoodbio.com/privacy/ - Contact: https://nutrition.rainwoodbio.com/contact/ ## Published specifications ### Minerals & Electrolytes Mineral purchasing turns on questions that a purity figure does not answer: which salt, which hydrate, which particle size, and whether the material is a single compound or a blend. A magnesium glycinate can be a 1:2 chelate, a buffered blend with magnesium oxide, or a hydrate with a lower elemental content — three different label ingredients that share a name. This range is built around the form, the elemental assay, the ligand ratio and the document that proves each one. #### Magnesium Bisglycinate URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-bisglycinate/ Chemical form: 1:2 magnesium–glycine chelate, anhydrous basis Formula: Mg(C₂H₄NO₂)₂ CAS: 14783-68-7 Summary: A 1:2 magnesium–glycine chelate specified at 13.5–14.2% elemental magnesium, for capsules, tablets and powder blends where the form named on the label has to match the form in the drum. Specification: - Magnesium (Mg): 13.5–14.2% (complexometric EDTA) - Glycine: 84.0–88.0% (HPLC) - Mg : glycine ratio: 1 : 2 molar (calculated) - Free glycine: ≤1.0% (HPLC) - Appearance: White to off-white crystalline powder - pH (5% suspension): 8.5–11.5 - Loss on drying: ≤8.0% - Particle size: ≥95% through 40 mesh - Bulk density: 0.55–0.90 g/mL - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Gummies and chews, Functional beverages - Solubility: Soluble in water; the 5% suspension is alkaline (pH 8.5–11.5). Dissolution rate depends on particle size. #### Zinc Bisglycinate URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-bisglycinate/ Chemical form: 1:2 zinc–glycine chelate, monohydrate Formula: Zn(C₂H₄NO₂)₂·H₂O CAS: 14281-83-5 Summary: A 1:2 zinc–glycine chelate specified at 26.0–28.0% elemental zinc, for capsules, tablets and powder blends where the label names a chelate rather than a zinc salt. Specification: - Zinc (Zn): 26.0–28.0% (complexometric EDTA) - Glycine: 59.5–64.5% (HPLC) - Zn : glycine ratio: 1 : 2 molar (calculated) - Free glycine: ≤1.0% (HPLC) - Appearance: White to off-white crystalline powder - pH (1% suspension): 5.0–8.0 - Loss on drying: ≤8.0% - Particle size: ≥95% through 40 mesh - Bulk density: 0.40–0.70 g/mL - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Gummies and chews, Functional beverages - Solubility: Soluble in water; the 1% suspension is slightly acidic to neutral (pH 5.0–8.0). #### Magnesium Citrate URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-citrate/ Chemical form: Anhydrous magnesium citrate Formula: C₁₂H₁₀Mg₃O₁₄ CAS: 3344-18-1 Summary: Anhydrous magnesium citrate specified at 14.5–16.4% elemental magnesium, for capsules and tablets where the hydrate state and the citrate identity have to be declared. Specification: - Magnesium (Mg): 14.5–16.4% (complexometric EDTA) - Appearance: White to off-white powder - Identification: Citrate reaction and IR conform - Loss on drying: ≤2.0% (anhydrous grade) - pH (5% suspension): 5.0–8.0 - Particle size: ≥95% through 40 mesh - Bulk density: 0.50–0.80 g/mL - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Gummies and chews, Functional beverages - Solubility: Soluble in water; the 5% suspension is slightly acidic to neutral (pH 5.0–8.0). #### Zinc Citrate URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-citrate/ Chemical form: Zinc citrate dihydrate, crystalline Formula: C₁₂H₁₀O₁₄Zn₃·2H₂O CAS: 5990-32-9 Summary: Zinc citrate dihydrate specified at 31.0–32.5% elemental zinc on the dried basis, for capsules and tablets where the citrate salt and the hydrate state have to be declared. Specification: - Zinc (Zn), dried basis: 31.0–32.5% (complexometric EDTA) - Appearance: White to off-white powder - Identification: Citrate reaction and IR conform - Loss on drying: ≤6.0% - pH (5% suspension): 5.0–7.0 - Particle size: ≥95% through 40 mesh - Bulk density: 0.50–0.85 g/mL - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Gummies and chews - Solubility: Slightly soluble in water; the 5% suspension is slightly acidic to neutral. #### Ferrous Gluconate URL: https://nutrition.rainwoodbio.com/products/minerals/ferrous-gluconate/ Chemical form: Ferrous gluconate dihydrate, powder Formula: C₁₂H₂₂FeO₁₄·2H₂O CAS: 299-29-6 Summary: Ferrous gluconate dihydrate specified at 11.8–12.5% elemental iron on the dried basis, for capsules and tablets where the ferrous state and the hydrate have to be declared. Specification: - Iron (Fe), dried basis: 11.8–12.5% (cerimetric titration) - Appearance: Greyish-yellow to greenish-yellow powder - Identification: Ferrous reaction and IR conform - Loss on drying: ≤8.0% - pH (5% solution): 3.0–5.0 - Particle size: ≥95% through 80 mesh - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Soluble in water with gentle warming; the solution is acidic. #### Iron Pyrophosphate URL: https://nutrition.rainwoodbio.com/products/minerals/iron-pyrophosphate/ Chemical form: Micronized ferric pyrophosphate Formula: Fe₄(P₂O₇)₃·xH₂O CAS: 10058-44-3 Summary: Micronized ferric pyrophosphate specified at 24.0–26.0% elemental iron, for capsules, tablets and powder blends where a less reactive iron source and a fine particle size matter. Specification: - Iron (Fe): 24.0–26.0% (ICP-OES) - Appearance: White to yellowish, fine powder - Identification: Iron and pyrophosphate reactions conform - Loss on drying: ≤5.0% - Particle size: Micronized, ≥95% through 200 mesh - Bulk density: 0.40–0.80 g/mL - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Functional beverages - Solubility: Practically insoluble in water; dispersible in a powder blend. #### Calcium Citrate URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-citrate/ Chemical form: Calcium citrate tetrahydrate, powder Formula: C₁₂H₁₀Ca₃O₁₄·4H₂O CAS: 813-94-5 Summary: Calcium citrate tetrahydrate specified at 21.0–22.0% elemental calcium, for capsules and tablets where the hydrate state and the citrate identity have to be declared. Specification: - Calcium (Ca): 21.0–22.0% (complexometric EDTA) - Assay (calcium citrate, dried basis): ≥97.5% - Appearance: White, odourless powder - Identification: Citrate reaction and IR conform - Loss on drying: ≤13.0% - Particle size: ≥95% through 80 mesh - Bulk density: 0.60–0.95 g/mL - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Gummies and chews - Solubility: Sparingly soluble in water; soluble in dilute hydrochloric acid. #### Chromium Picolinate URL: https://nutrition.rainwoodbio.com/products/minerals/chromium-picolinate/ Chemical form: Chromium picolinate, crystalline Formula: C₁₈H₁₂CrN₃O₆ CAS: 14639-25-9 Summary: Chromium picolinate specified at 12.2–12.4% elemental chromium, for capsules and tablets where the picolinate identity and the low dose make the blend the real specification. Specification: - Chromium (Cr): 12.2–12.4% (ICP-OES) - Appearance: Purple-red to red-brown crystalline powder - Identification: IR and HPLC conform - Loss on drying: ≤0.5% - Residue on ignition: ≤0.2% - Particle size: ≥95% through 40 mesh - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Sparingly soluble in water; the low dose usually needs a dilution. #### Magnesium Malate URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-malate/ Chemical form: Magnesium DL-malate, dihydrate Formula: C₄H₁₀MgO₈ CAS: 869-06-7 Summary: Magnesium DL-malate dihydrate specified at 11.3–11.8% elemental magnesium, for capsules and tablets where the malate salt and the water content have to be declared. Specification: - Magnesium (Mg): 11.3–11.8% (complexometric EDTA) - Appearance: White to off-white powder - Identification: Malate reaction and IR conform - Water (Karl Fischer): 22.0–26.5% - pH (5% suspension): 4.0–7.0 - Particle size: ≥95% through 80 mesh - Bulk density: 0.50–0.85 g/mL - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Gummies and chews - Solubility: Sparingly soluble in water; soluble in hot water. #### Magnesium L-Threonate URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-l-threonate/ Chemical form: Magnesium L-threonate, crystalline Formula: C₈H₁₄MgO₁₀ CAS: 778571-57-6 Summary: Magnesium L-threonate specified at 98.0–102.0% on the dried basis and 7.2–8.3% elemental magnesium, for capsules where the L-threonate identity and the low magnesium content have to be declared. Specification: - Magnesium L-threonate (dried basis): 98.0–102.0% (titration) - Magnesium (Mg): 7.2–8.3% (titration) - Appearance: White to off-white crystalline powder - Identification: IR and L-threonate reaction conform - pH (5% solution): 5.8–9.0 - Loss on drying: ≤5.0% - Particle size: ≥95% through 80 mesh - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Freely soluble in water; the 5% solution is slightly acidic to alkaline (pH 5.8–9.0). #### Magnesium Taurate URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-taurate/ Chemical form: Magnesium taurate, powder Formula: C₄H₁₂MgN₂O₆S₂ CAS: 334824-43-0 Summary: Magnesium taurate specified at 8.0–9.0% elemental magnesium on the dried basis, for capsules and tablets where the taurate identity and the magnesium content have to be declared. Specification: - Magnesium (Mg), dried basis: 8.0–9.0% (complexometric EDTA) - Appearance: White to off-white powder - Identification: Taurate reaction and IR conform - Loss on drying: ≤10.0% - pH (5% suspension): 5.0–7.0 - Particle size: ≥90% through 60 mesh - Bulk density: 0.50–0.80 g/mL - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Soluble in water; the 5% suspension is slightly acidic to neutral (pH 5.0–7.0). #### Calcium Bisglycinate URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-bisglycinate/ Chemical form: Calcium bisglycinate, powder Formula: C₄H₈CaN₂O₄ CAS: 136-26-5 Summary: Calcium bisglycinate specified at 18.5–23.0% elemental calcium, for capsules and tablets where the chelate form and the calcium content have to be declared. Specification: - Calcium (Ca): 18.5–23.0% (complexometric EDTA) - Appearance: White to off-white powder - Identification: IR and glycine reaction conform - Loss on drying: ≤5.0% - pH (5% suspension): 6.0–8.0 - Particle size: ≥95% through 80 mesh - Bulk density: 0.50–0.80 g/mL - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Gummies and chews - Solubility: Sparingly soluble in water; the 5% suspension is close to neutral. #### Zinc Gluconate URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-gluconate/ Chemical form: Zinc gluconate, crystalline Formula: C₁₂H₂₂O₁₄Zn CAS: 4468-02-4 Summary: Zinc gluconate specified at 97.0–102.0% on the anhydrous basis and 12.5–14.0% elemental zinc, for capsules and tablets where the gluconate salt and the taste profile matter. Specification: - Assay (anhydrous basis): 97.0–102.0% (complexometric EDTA) - Zinc (Zn): 12.5–14.0% (complexometric EDTA) - Appearance: White to off-white crystalline powder - Identification: Zinc and gluconate reactions conform - pH (10% solution): 6.0–7.5 - Loss on drying: ≤1.0% - Particle size: ≥95% through 80 mesh - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Gummies and chews - Solubility: Freely soluble in water; the 10% solution is close to neutral (pH 6.0–7.5). #### L-Selenomethionine URL: https://nutrition.rainwoodbio.com/products/minerals/selenomethionine/ Chemical form: L-selenomethionine, crystalline Formula: C₅H₁₁NO₂Se CAS: 3211-76-5 Summary: L-selenomethionine specified at 97.0–103.0% and 39.0–41.0% selenium, for capsules and tablets where the organic selenium form, the rotation and the selenium figure have to be declared. Specification: - Assay (as-is basis): 97.0–103.0% (HPLC) - Selenium (Se): 39.0–41.0% (ICP-MS) - Appearance: White to off-white crystalline powder - Identification: IR conforms - Specific rotation: +17.0° to +19.5° - Loss on drying: ≤0.5% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Soluble in water; the solution is clear and colourless. #### Selenium Yeast URL: https://nutrition.rainwoodbio.com/products/minerals/selenium-yeast/ Chemical form: Selenium-enriched yeast powder Formula: Selenium-enriched yeast (organic selenium) CAS: — Summary: Selenium-enriched yeast specified at 1,800–2,200 mg/kg selenium and ≥40% protein, for capsules and tablets where the organic selenium source and the yeast matrix have to be declared. Specification: - Selenium (Se): 1,800–2,200 mg/kg (ICP-MS) - Protein: ≥40.0% - Appearance: Yellow to light brown powder - Moisture: ≤6.0% - Heavy metals: Pb ≤2 · As ≤1 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤30,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Dispersible in water; the yeast matrix does not form a clear solution. #### Calcium L-Threonate URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-l-threonate/ Chemical form: Calcium L-threonate, powder Formula: C₈H₁₄CaO₁₀ CAS: 70753-61-6 Summary: Calcium L-threonate specified at 98.0–102.0% with 12.0–13.5% elemental calcium; the threonate counter-ion, the hydrate state and the calcium figure are part of the specification. Specification: - Assay (HPLC): 98.0–102.0% - Calcium (titration): 12.0–13.5% - Appearance: White crystalline powder - Identification: IR and HPLC conform - Loss on drying: ≤6.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Freely soluble in water; the solution is neutral to slightly acidic. #### Calcium Lactate URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-lactate/ Chemical form: Calcium lactate pentahydrate, powder Formula: C₆H₁₀CaO₆·5H₂O CAS: 5743-47-5 Summary: Calcium lactate pentahydrate specified at 98.0–101.0% with 13.0–14.0% elemental calcium; the hydrate state changes the calcium figure, the fill weight and the label. Specification: - Assay (titration): 98.0–101.0% - Calcium (titration): 13.0–14.0% - Appearance: White crystalline powder - Identification: IR and titration conform - Water (Karl Fischer): 22.0–27.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Soluble in water; the solution is neutral to slightly alkaline. #### Calcium Malate URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-malate/ Chemical form: Calcium malate, powder Formula: C₄H₄CaO₅ CAS: 17482-42-7 Summary: Calcium malate specified at 98.0–102.0% with 22.0–24.0% elemental calcium; the malate counter-ion, the hydrate state and the calcium figure are part of the specification. Specification: - Assay (HPLC): 98.0–102.0% - Calcium (titration): 22.0–24.0% - Appearance: White to off-white powder - Identification: IR and HPLC conform - Loss on drying: ≤2.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Slightly soluble in water; more soluble in acidic solutions. #### Calcium Carbonate URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-carbonate/ Chemical form: Precipitated calcium carbonate, powder Formula: CaCO₃ CAS: 471-34-1 Summary: Calcium carbonate specified at ≥99.0% with 39.0–41.0% elemental calcium; the source, the crystal form and the acid-insoluble matter are part of the specification. Specification: - Assay (titration): ≥99.0% - Calcium (titration): 39.0–41.0% - Appearance: White powder - Identification: IR and titration conform - Loss on drying: ≤1.0% - Acid-insoluble matter: ≤0.2% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Practically insoluble in water; soluble in dilute acids with effervescence. #### Calcium Aspartate URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-aspartate/ Chemical form: Calcium L-aspartate, powder Formula: C₈H₁₂CaN₂O₈ CAS: 39162-75-9 Summary: Calcium L-aspartate specified at 98.0–102.0% with 12.0–14.0% elemental calcium; the aspartate counter-ion and the calcium figure are part of the specification. Specification: - Assay (HPLC): 98.0–102.0% - Calcium (titration): 12.0–14.0% - Appearance: White to off-white powder - Identification: IR and HPLC conform - Loss on drying: ≤6.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Soluble in water; the solution is neutral to slightly acidic. #### Calcium Gluconate URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-gluconate/ Chemical form: Calcium gluconate monohydrate, powder Formula: C₁₂H₂₂CaO₁₄·H₂O CAS: 18016-24-5 Summary: Calcium gluconate monohydrate specified at 98.0–102.0% with 8.5–9.5% elemental calcium; the low calcium figure per gram drives the fill weight and the tablet size. Specification: - Assay (titration): 98.0–102.0% - Calcium (titration): 8.5–9.5% - Appearance: White crystalline powder - Identification: IR and titration conform - Water (Karl Fischer): 3.0–6.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Soluble in water; the solution is neutral. #### Magnesium Lactate URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-lactate/ Chemical form: Magnesium lactate trihydrate, powder Formula: C₆H₁₀MgO₆·3H₂O CAS: 18917-93-6 Summary: Magnesium lactate trihydrate specified at 98.0–102.0% with 8.5–9.5% elemental magnesium; the hydrate state and the magnesium figure are part of the specification. Specification: - Assay (titration): 98.0–102.0% - Magnesium (titration): 8.5–9.5% - Appearance: White crystalline powder - Identification: IR and titration conform - Water (Karl Fischer): 18.0–22.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Freely soluble in water; the solution is neutral. #### Magnesium Chloride URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-chloride/ Chemical form: Magnesium chloride hexahydrate, powder or flakes Formula: MgCl₂·6H₂O CAS: 7791-18-6 Summary: Magnesium chloride hexahydrate specified at ≥99.0% with 11.5–12.5% elemental magnesium; the hydrate state, the chloride and the hygroscopic pack are part of the specification. Specification: - Assay (titration): ≥99.0% - Magnesium (titration): 11.5–12.5% - Appearance: White powder or flakes - Identification: IR and titration conform - Water (Karl Fischer): 45.0–55.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Very soluble in water; deliquescent in humid air. #### Magnesium Gluconate URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-gluconate/ Chemical form: Magnesium gluconate, powder Formula: C₁₂H₂₂MgO₁₄ CAS: 3632-91-5 Summary: Magnesium gluconate specified at 98.0–102.0% with 5.5–6.0% elemental magnesium; the gluconate carries a low magnesium figure per gram, so the fill weight and the label follow the salt. Specification: - Assay (titration): 98.0–102.0% - Magnesium (titration): 5.5–6.0% - Appearance: White to off-white powder - Identification: IR and titration conform - Water (Karl Fischer): ≤1.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Freely soluble in water; the solution is neutral. #### Magnesium Oxide URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-oxide/ Chemical form: Magnesium oxide, powder Formula: MgO CAS: 1309-48-4 Summary: Magnesium oxide specified at ≥96.0% with 57.0–60.0% elemental magnesium; the high magnesium figure, the acid-insoluble matter and the source are part of the specification. Specification: - Assay (titration): ≥96.0% - Magnesium (titration): 57.0–60.0% - Appearance: White powder - Identification: IR and titration conform - Loss on drying: ≤0.5% - Acid-insoluble matter: ≤0.1% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Practically insoluble in water; soluble in dilute acids. #### Magnesium Sulfate URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-sulfate/ Chemical form: Magnesium sulfate heptahydrate, crystals or powder Formula: MgSO₄·7H₂O CAS: 10034-99-8 Summary: Magnesium sulfate heptahydrate specified at ≥99.0% with 9.5–10.0% elemental magnesium; the hydrate state, the sulfate and the water content are part of the specification. Specification: - Assay (titration): ≥99.0% - Magnesium (titration): 9.5–10.0% - Appearance: Colourless crystals or white powder - Identification: IR and titration conform - Water (Karl Fischer): 48.0–52.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Freely soluble in water; the solution is neutral. #### Magnesium Orotate URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-orotate/ Chemical form: Magnesium orotate dihydrate, powder Formula: C₁₀H₆MgN₄O₈·2H₂O CAS: 34717-03-8 Summary: Magnesium orotate dihydrate specified at 98.0–102.0% with 6.4–6.8% elemental magnesium; the orotate counter-ion, the hydrate state and the magnesium figure are part of the specification. Specification: - Assay (HPLC): 98.0–102.0% - Magnesium (titration): 6.4–6.8% - Appearance: White to off-white powder - Identification: IR and HPLC conform - Water (Karl Fischer): 9.0–11.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Slightly soluble in water; the solubility is low compared with the citrate or the lactate. #### Zinc Lactate URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-lactate/ Chemical form: Zinc lactate trihydrate, powder Formula: C₆H₁₀O₆Zn·3H₂O CAS: 16039-53-5 Summary: Zinc lactate trihydrate specified at 98.0–102.0% with 21.0–23.0% elemental zinc; the hydrate state and the zinc figure are part of the specification. Specification: - Assay (titration): 98.0–102.0% - Zinc (titration): 21.0–23.0% - Appearance: White crystalline powder - Identification: IR and titration conform - Water (Karl Fischer): 17.0–19.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Soluble in water; the solution is slightly acidic. #### Zinc Malate URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-malate/ Chemical form: Zinc malate, powder Formula: C₄H₄O₅Zn CAS: 2847-05-4 Summary: Zinc malate specified at 98.0–102.0% with 32.0–34.0% elemental zinc; the malate counter-ion and the zinc figure are part of the specification. Specification: - Assay (HPLC): 98.0–102.0% - Zinc (titration): 32.0–34.0% - Appearance: White to off-white powder - Identification: IR and HPLC conform - Loss on drying: ≤2.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Slightly soluble in water; more soluble in acidic solutions. #### Zinc Oxide URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-oxide/ Chemical form: Zinc oxide, powder Formula: ZnO CAS: 1314-13-2 Summary: Zinc oxide specified at ≥99.0% with 78.0–80.0% elemental zinc; the source, the particle size and the lead result are part of the specification. Specification: - Assay (titration): ≥99.0% - Zinc (titration): 78.0–80.0% - Appearance: White powder - Identification: IR and titration conform - Loss on drying: ≤0.5% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Practically insoluble in water; soluble in dilute acids. #### Zinc Picolinate URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-picolinate/ Chemical form: Zinc picolinate, powder Formula: C₁₂H₈N₂O₄Zn CAS: 17949-65-4 Summary: Zinc picolinate specified at 98.0–102.0% with 20.0–21.5% elemental zinc; the picolinate ligand and the zinc figure are part of the specification. Specification: - Assay (HPLC): 98.0–102.0% - Zinc (titration): 20.0–21.5% - Appearance: White to off-white powder - Identification: IR and HPLC conform - Loss on drying: ≤1.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Slightly soluble in water; more soluble in acidic solutions. #### Ferrous Lactate URL: https://nutrition.rainwoodbio.com/products/minerals/ferrous-lactate/ Chemical form: Ferrous lactate, powder Formula: C₆H₁₀FeO₆ CAS: 5905-52-2 Summary: Ferrous lactate specified at 96.0–101.0% with 23.0–24.5% elemental iron; the hydrate state and the iron figure decide the fill weight and the label. Specification: - Assay (titration): 96.0–101.0% - Iron (titration): 23.0–24.5% - Appearance: Greenish-white powder - Identification: IR and titration conform - Loss on drying: ≤1.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Soluble in water; the solution is acidic and oxidises on standing. #### Ferrous Fumarate URL: https://nutrition.rainwoodbio.com/products/minerals/ferrous-fumarate/ Chemical form: Ferrous fumarate, powder Formula: C₄H₂FeO₄ CAS: 141-01-5 Summary: Ferrous fumarate specified at 97.0–101.0% with 31.0–33.0% elemental iron; the high iron figure and the low solubility are part of the specification. Specification: - Assay (titration): 97.0–101.0% - Iron (titration): 31.0–33.0% - Appearance: Orange-red to reddish-brown powder - Identification: IR and titration conform - Loss on drying: ≤2.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Practically insoluble in water; soluble in dilute acids. #### Ferrous Sulfate URL: https://nutrition.rainwoodbio.com/products/minerals/ferrous-sulfate/ Chemical form: Ferrous sulfate heptahydrate, crystals or powder Formula: FeSO₄·7H₂O CAS: 7782-63-0 Summary: Ferrous sulfate heptahydrate specified at 99.0–101.0% with 19.5–20.5% elemental iron; the hydrate state, the water content and the oxidation state are part of the specification. Specification: - Assay (titration): 99.0–101.0% - Iron (titration): 19.5–20.5% - Appearance: Pale blue-green crystals or powder - Identification: IR and titration conform - Water (Karl Fischer): 45.0–48.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Freely soluble in water; the solution is acidic and oxidises on standing. #### Iron Bisglycinate URL: https://nutrition.rainwoodbio.com/products/minerals/iron-bisglycinate/ Chemical form: Ferrous bisglycinate, powder Formula: C₄H₈FeN₂O₄ CAS: 20150-34-9 Summary: Ferrous bisglycinate specified at 98.0–102.0% with 26.0–28.0% elemental iron; the chelate, the glycine ratio and the iron figure are part of the specification. Specification: - Assay (HPLC): 98.0–102.0% - Iron (titration): 26.0–28.0% - Appearance: Greenish-grey to off-white powder - Identification: IR and HPLC conform - Loss on drying: ≤5.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Soluble in water; the solution is acidic. #### Manganese Gluconate URL: https://nutrition.rainwoodbio.com/products/minerals/manganese-gluconate/ Chemical form: Manganese gluconate, powder Formula: C₁₂H₂₂MnO₁₄ CAS: 6485-39-8 Summary: Manganese gluconate specified at 98.0–102.0% with 11.5–12.5% elemental manganese; the gluconate carries a low manganese figure per gram, so the fill weight follows the salt. Specification: - Assay (titration): 98.0–102.0% - Manganese (titration): 11.5–12.5% - Appearance: White to pinkish powder - Identification: IR and titration conform - Water (Karl Fischer): ≤1.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Freely soluble in water; the solution is neutral. #### Manganese Bisglycinate URL: https://nutrition.rainwoodbio.com/products/minerals/manganese-bisglycinate/ Chemical form: Manganese bisglycinate, powder Formula: C₄H₈MnN₂O₄ CAS: 14281-77-7 Summary: Manganese bisglycinate specified at 98.0–102.0% with 25.0–27.5% elemental manganese; the chelate, the glycine ratio and the manganese figure are part of the specification. Specification: - Assay (HPLC): 98.0–102.0% - Manganese (titration): 25.0–27.5% - Appearance: Off-white to pale pink powder - Identification: IR and HPLC conform - Loss on drying: ≤5.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Soluble in water; the solution is acidic. #### Manganese Sulfate URL: https://nutrition.rainwoodbio.com/products/minerals/manganese-sulfate/ Chemical form: Manganese sulfate monohydrate, powder Formula: MnSO₄·H₂O CAS: 10034-96-5 Summary: Manganese sulfate monohydrate specified at ≥98.0% with 31.5–33.0% elemental manganese; the hydrate state and the manganese figure are part of the specification. Specification: - Assay (titration): ≥98.0% - Manganese (titration): 31.5–33.0% - Appearance: Pale pink powder - Identification: IR and titration conform - Water (Karl Fischer): 10.0–12.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Freely soluble in water; the solution is acidic. #### Copper Gluconate URL: https://nutrition.rainwoodbio.com/products/minerals/copper-gluconate/ Chemical form: Copper gluconate, powder Formula: C₁₂H₂₂CuO₁₄ CAS: 527-09-3 Summary: Copper gluconate specified at 98.0–102.0% with 13.5–14.5% elemental copper; the gluconate carries a low copper figure per gram, so the fill weight follows the salt. Specification: - Assay (titration): 98.0–102.0% - Copper (titration): 13.5–14.5% - Appearance: Blue-green powder - Identification: IR and titration conform - Water (Karl Fischer): ≤1.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Freely soluble in water; the solution is blue-green and slightly acidic. #### Copper Bisglycinate URL: https://nutrition.rainwoodbio.com/products/minerals/copper-bisglycinate/ Chemical form: Copper bisglycinate, powder Formula: C₄H₈CuN₂O₄ CAS: 13479-54-4 Summary: Copper bisglycinate specified at 98.0–102.0% with 29.0–31.0% elemental copper; the chelate, the glycine ratio and the copper figure are part of the specification. Specification: - Assay (HPLC): 98.0–102.0% - Copper (titration): 29.0–31.0% - Appearance: Blue powder - Identification: IR and HPLC conform - Loss on drying: ≤5.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Slightly soluble in water; the solution is acidic. #### Potassium Citrate URL: https://nutrition.rainwoodbio.com/products/minerals/potassium-citrate/ Chemical form: Potassium citrate monohydrate, powder Formula: C₆H₅K₃O₇·H₂O CAS: 6100-05-6 Summary: Potassium citrate monohydrate specified at 99.0–100.5% with 35.0–37.0% elemental potassium; the hydrate state, the potassium figure and the alkalinity are part of the specification. Specification: - Assay (titration): 99.0–100.5% - Potassium (titration): 35.0–37.0% - Appearance: White crystalline powder - Identification: IR and titration conform - Water (Karl Fischer): 5.0–6.5% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Freely soluble in water; the solution is alkaline. #### Potassium Iodide URL: https://nutrition.rainwoodbio.com/products/minerals/potassium-iodide/ Chemical form: Potassium iodide, crystals or powder Formula: KI CAS: 7681-11-0 Summary: Potassium iodide specified at 99.0–101.5% with 75.0–78.0% iodine; the iodide figure, the water content and the reducing-agent limit are part of the specification. Specification: - Assay (titration): 99.0–101.5% - Iodide (titration): 75.0–78.0% - Appearance: White crystals or powder - Identification: IR and titration conform - Loss on drying: ≤1.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Freely soluble in water; the solution is neutral to slightly alkaline. #### Potassium Gluconate URL: https://nutrition.rainwoodbio.com/products/minerals/potassium-gluconate/ Chemical form: Potassium gluconate, powder Formula: C₆H₁₁KO₇ CAS: 299-27-4 Summary: Potassium gluconate specified at 99.0–101.0% with 16.0–17.0% elemental potassium; the gluconate carries a low potassium figure per gram, so the fill weight follows the salt. Specification: - Assay (titration): 99.0–101.0% - Potassium (titration): 16.0–17.0% - Appearance: White crystalline powder - Identification: IR and titration conform - Loss on drying: ≤1.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Freely soluble in water; the solution is neutral. #### Sodium Citrate URL: https://nutrition.rainwoodbio.com/products/minerals/sodium-citrate/ Chemical form: Sodium citrate dihydrate, crystals or powder Formula: C₆H₅Na₃O₇·2H₂O CAS: 6132-04-3 Summary: Sodium citrate dihydrate specified at 99.0–100.5% with 22.5–24.0% elemental sodium; the hydrate state, the sodium figure and the alkalinity are part of the specification. Specification: - Assay (titration): 99.0–100.5% - Sodium (titration): 22.5–24.0% - Appearance: White crystals or powder - Identification: IR and titration conform - Water (Karl Fischer): 11.0–13.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Freely soluble in water; the solution is alkaline. #### Sodium Selenite URL: https://nutrition.rainwoodbio.com/products/minerals/sodium-selenite/ Chemical form: Sodium selenite, powder Formula: Na₂SeO₃ CAS: 10102-18-8 Summary: Sodium selenite specified at 98.0–101.0% with 44.0–46.0% elemental selenium; the selenium figure, the oxidation state and the water content are part of the specification. Specification: - Assay (titration): 98.0–101.0% - Selenium (titration): 44.0–46.0% - Appearance: White to off-white powder - Identification: IR and titration conform - Loss on drying: ≤2.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Freely soluble in water; the solution is neutral to slightly alkaline. #### Sodium Molybdate URL: https://nutrition.rainwoodbio.com/products/minerals/sodium-molybdate/ Chemical form: Sodium molybdate, powder Formula: Na₂MoO₄ CAS: 10141-05-6 Summary: Sodium molybdate specified at 99.0–101.0% with 45.0–47.0% elemental molybdenum; the molybdenum figure, the hydrate state and the water content are part of the specification. Specification: - Assay (HPLC): 99.0–101.0% - Molybdenum (titration): 45.0–47.0% - Appearance: White crystalline powder - Identification: IR and HPLC conform - Loss on drying: ≤1.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Freely soluble in water; the solution is neutral to slightly alkaline. #### Dicalcium Phosphate URL: https://nutrition.rainwoodbio.com/products/minerals/dicalcium-phosphate/ Chemical form: Dicalcium phosphate, anhydrous, powder Formula: CaHPO₄ CAS: 7757-93-9 Summary: Dicalcium phosphate specified at 98.0–102.0% with 29.0–30.0% elemental calcium and 22.0–23.5% phosphorus; the Ca : P ratio and the hydrate state are part of the specification. Specification: - Assay (titration): 98.0–102.0% - Calcium (titration): 29.0–30.0% - Phosphorus (spectrophotometry): 22.0–23.5% - Appearance: White powder - Identification: IR and titration conform - Loss on drying: ≤2.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Practically insoluble in water; soluble in dilute acids. #### Chromium Nicotinate URL: https://nutrition.rainwoodbio.com/products/minerals/chromium-nicotinate/ Chemical form: Chromium nicotinate, powder Formula: C₁₈H₁₂CrN₃O₆ CAS: 64452-96-6 Summary: Chromium nicotinate specified at 98.0–102.0% with 12.0–12.8% elemental chromium; the nicotinate ligand and the chromium figure are part of the specification. Specification: - Assay (HPLC): 98.0–102.0% - Chromium (titration): 12.0–12.8% - Appearance: Grey-green powder - Identification: IR and HPLC conform - Loss on drying: ≤1.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Slightly soluble in water; more soluble in acidic solutions. #### Boron Bisglycinate URL: https://nutrition.rainwoodbio.com/products/minerals/boron-bisglycinate/ Chemical form: Boron glycinate complex, powder Formula: C₃H₈BNO₂ CAS: — Summary: Boron bisglycinate specified at 5.0–6.0% elemental boron; the glycine–boron complex has no single CAS, so the boron figure and the ligand identity are the specification. Specification: - Boron (ICP-OES): 5.0–6.0% - Appearance: White to off-white powder - Identification: IR conform - Loss on drying: ≤5.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Soluble in water; the solution is slightly acidic. #### Lithium Orotate URL: https://nutrition.rainwoodbio.com/products/minerals/lithium-orotate/ Chemical form: Lithium orotate, powder Formula: C₅H₃LiN₂O₄ CAS: 5266-20-6 Summary: Lithium orotate specified at 98.0–102.0% with 4.0–4.5% elemental lithium; the orotate counter-ion and the lithium figure are part of the specification. Specification: - Assay (HPLC): 98.0–102.0% - Lithium (titration): 4.0–4.5% - Appearance: White to off-white powder - Identification: IR and HPLC conform - Loss on drying: ≤1.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Slightly soluble in water; the solubility is low compared with the citrate or the chloride. #### Zinc Sulfate URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-sulfate/ Chemical form: Zinc sulfate heptahydrate, crystals or powder Formula: ZnSO₄·7H₂O CAS: 7446-20-0 Summary: Zinc sulfate heptahydrate specified at 99.0–101.0% with 22.0–23.0% elemental zinc; the hydrate state, the water content and the zinc figure are part of the specification. Specification: - Assay (titration): 99.0–101.0% - Zinc (titration): 22.0–23.0% - Appearance: Colourless crystals or white powder - Identification: IR and titration conform - Water (Karl Fischer): 43.0–46.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Freely soluble in water; the solution is acidic. #### Magnesium Citrate Nonahydrate URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-citrate-nonahydrate/ Chemical form: Magnesium citrate nonahydrate, powder Formula: Mg₃(C₆H₅O₇)₂·9H₂O CAS: 153531-96-5 Summary: Magnesium citrate nonahydrate specified at 11.0–12.5% magnesium with 24–28% water; the hydrate, the magnesium figure and the water are the specification. Specification: - Magnesium (complexometric): 11.0–12.5% - Water (Karl Fischer): 24.0–28.0% - Appearance: White to off-white powder - Identification: Citrate reaction and Mg titration conform - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Soluble in water; the solution is clear to slightly opalescent. #### Magnesium Bisglycinate Hydrate URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-bisglycinate-hydrate/ Chemical form: Magnesium bisglycinate hydrate, powder Formula: C₄H₈MgN₂O₄·xH₂O CAS: 14783-68-7 Summary: Magnesium bisglycinate hydrate specified at 11.0–12.5% magnesium with a 1:2 magnesium–glycine ratio and 8–14% water; the hydrate and the ratio are the specification. Specification: - Magnesium (complexometric): 11.0–12.5% - Glycine (HPLC): 1:2 Mg : glycine ratio - Loss on drying: 8.0–14.0% - Appearance: White to off-white powder - Identification: Glycine and Mg conform - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Soluble in water; the solution is clear to slightly opalescent. #### Selenium Glycinate URL: https://nutrition.rainwoodbio.com/products/minerals/selenium-glycinate/ Chemical form: Selenium glycinate, powder Formula: — CAS: — Summary: Selenium glycinate specified at 1.0–2.0% selenium by ICP-MS with a defined glycine ratio; the chelate and selenomethionine are different products with different selenium forms and labels. Specification: - Selenium (ICP-MS): 1.0–2.0% - Glycine (HPLC): Chelate ratio conform - Appearance: White to off-white powder - Identification: Selenium and glycine conform - Loss on drying: ≤5.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Soluble in water; the solution is clear. #### Tricalcium Phosphate URL: https://nutrition.rainwoodbio.com/products/minerals/tricalcium-phosphate/ Chemical form: Tricalcium phosphate, powder Formula: Ca₃(PO₄)₂ CAS: 7758-87-4 Summary: Tricalcium phosphate specified at 34.0–40.0% calcium and 18.0–20.0% phosphorus; the tribasic salt and dicalcium phosphate are different products with different calcium/phosphorus ratios. Specification: - Calcium (complexometric): 34.0–40.0% - Phosphorus (titration): 18.0–20.0% - Appearance: White to off-white powder - Identification: Calcium and phosphate conform - Loss on drying: ≤2.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends, Toothpaste-grade separation on request - Solubility: Insoluble in water; soluble in dilute acids. #### Calcium Chloride URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-chloride/ Chemical form: Calcium chloride dihydrate, powder Formula: CaCl₂·2H₂O CAS: 10035-04-8 Summary: Calcium chloride dihydrate specified at 99.0–101.0% by titration with 27.0–29.0% calcium; the chloride salt and calcium carbonate are different products with different solubility and pH. Specification: - Assay (titration): 99.0–101.0% - Calcium: 27.0–29.0% - Appearance: White to off-white powder - Identification: Calcium and chloride conform - Water (Karl Fischer): 20.0–25.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends, Beverage concentrates - Solubility: Freely soluble in water; the solution is neutral to slightly acidic. #### Potassium Chloride URL: https://nutrition.rainwoodbio.com/products/minerals/potassium-chloride/ Chemical form: Potassium chloride, powder Formula: KCl CAS: 7447-40-7 Summary: Potassium chloride specified at 99.0–101.0% by titration with 52.0–55.0% potassium; the chloride salt and potassium citrate are different products with different pH and chloride load. Specification: - Assay (titration): 99.0–101.0% - Potassium: 52.0–55.0% - Appearance: White to off-white powder - Identification: Potassium and chloride conform - Loss on drying: ≤0.5% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Electrolyte blends - Solubility: Freely soluble in water; the solution is neutral. #### Magnesium Acetate URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-acetate/ Chemical form: Magnesium acetate tetrahydrate, powder Formula: C₄H₆MgO₄·4H₂O CAS: 16674-78-5 Summary: Magnesium acetate tetrahydrate specified at 99.0–101.0% by titration with 11.0–12.5% magnesium; the acetate salt and magnesium citrate are different products with different solubility and taste. Specification: - Assay (titration): 99.0–101.0% - Magnesium: 11.0–12.5% - Appearance: White to off-white powder - Identification: Magnesium and acetate conform - Water (Karl Fischer): 25.0–30.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Freely soluble in water; the solution is neutral to slightly acidic. #### Zinc Acetate URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-acetate/ Chemical form: Zinc acetate dihydrate, powder Formula: C₄H₆O₄Zn·2H₂O CAS: 5970-45-6 Summary: Zinc acetate dihydrate specified at 99.0–101.0% by titration with 29.0–32.0% zinc; the acetate salt and zinc sulfate are different products with different pH and counter-ion. Specification: - Assay (titration): 99.0–101.0% - Zinc: 29.0–32.0% - Appearance: White to off-white powder - Identification: Zinc and acetate conform - Water (Karl Fischer): 10.0–14.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Freely soluble in water; the solution is slightly acidic. #### Ferrous Sulfate Dried URL: https://nutrition.rainwoodbio.com/products/minerals/ferrous-sulfate-dried/ Chemical form: Dried ferrous sulfate, powder Formula: FeSO₄·H₂O CAS: 7720-78-7 Summary: Dried ferrous sulfate specified at 30.0–33.0% iron by titration; the dried monohydrate and the heptahydrate are different products with different water and iron content. Specification: - Iron (titration): 30.0–33.0% - Appearance: Gray-white to off-white powder - Identification: Iron and sulfate conform - Loss on drying: ≤1.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Soluble in water; the solution is acidic and pale green. #### Zinc Sulfate Monohydrate URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-sulfate-monohydrate/ Chemical form: Zinc sulfate monohydrate, powder Formula: ZnSO₄·H₂O CAS: 7446-19-7 Summary: Zinc sulfate monohydrate specified at 35.0–38.0% zinc by titration; the monohydrate and the heptahydrate are different products with different water and zinc content. Specification: - Zinc (complexometric): 35.0–38.0% - Appearance: White to off-white powder - Identification: Zinc and sulfate conform - Loss on drying: ≤1.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Freely soluble in water; the solution is acidic. #### Calcium Citrate Anhydrous URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-citrate-anhydrous/ Chemical form: Calcium citrate anhydrous, powder Formula: Ca₃(C₆H₅O₇)₂ CAS: 813-94-5 Summary: Calcium citrate anhydrous specified at 21.0–24.0% calcium by titration; the anhydrous salt and the tetrahydrate are different products with different water and calcium content. Specification: - Calcium (complexometric): 21.0–24.0% - Appearance: White to off-white powder - Identification: Calcium and citrate conform - Loss on drying: ≤1.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Slightly soluble in water; soluble in dilute acids. #### Magnesium Sulfate Anhydrous URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-sulfate-anhydrous/ Chemical form: Magnesium sulfate anhydrous, powder Formula: MgSO₄ CAS: 7487-88-9 Summary: Magnesium sulfate anhydrous specified at 19.0–20.5% magnesium by titration; the anhydrous salt and the heptahydrate are different products with different water and magnesium content. Specification: - Magnesium (complexometric): 19.0–20.5% - Appearance: White to off-white powder - Identification: Magnesium and sulfate conform - Loss on drying: ≤1.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Freely soluble in water; the solution is neutral. ### Vitamins & Cofactors Vitamin ingredients are rarely one substance. Ascorbic acid, sodium ascorbate and coated grades behave differently in a tablet; folate has several active forms; vitamin D3 arrives on a carrier. This range is built around the form, the assay method and the carrier, not around a headline percentage. Each published grade names all three. #### Vitamin C URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-c/ Chemical form: L-ascorbic acid, crystalline Formula: C₆H₈O₆ CAS: 50-81-7 Summary: L-ascorbic acid specified at 99.0–100.5% by iodometric titration, for capsules, tablets, powder sticks and beverages where the label needs a defined vitamin C form. Specification: - Assay (as C₆H₈O₆): 99.0–100.5% (iodometric titration) - Appearance: White to off-white crystals or crystalline powder - Identification: IR and UV conform - Specific rotation: +20.5° to +21.5° (10% solution) - pH (5% solution): 2.1–2.6 - Loss on drying: ≤0.5% - Residue on ignition: ≤0.1% - Oxalic acid: ≤0.2% - Iron / copper: Fe ≤2 ppm · Cu ≤5 ppm - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Functional beverages, Gummies and chews - Solubility: Freely soluble in water; the 5% solution is acidic (pH 2.1–2.6). #### Inositol URL: https://nutrition.rainwoodbio.com/products/vitamins/inositol/ Chemical form: Myo-inositol, crystalline Formula: C₆H₁₂O₆ CAS: 87-89-8 Summary: Myo-inositol specified at 99.0–101.0% by HPLC, for capsules, tablets and powder blends where the isomer and the assay method have to be on the label. Specification: - Assay (myo-inositol): 99.0–101.0% (HPLC) - Appearance: White crystalline powder - Identification: IR conforms - Melting point: 224–227 °C - Loss on drying: ≤0.5% - Residue on ignition: ≤0.1% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Gummies and chews, Functional beverages - Solubility: Freely soluble in water (about 0.5 M at 20 °C); solutions are clear and colourless. #### Vitamin K2 MK-7 URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k2-mk7/ Chemical form: Menaquinone-7 1% spray-dried powder on carrier Formula: C₄₆H₆₄O₂ CAS: 2124-57-4 Summary: Menaquinone-7 as a 1% spray-dried powder, specified for MK-7 content and all-trans isomer ratio, for capsules and tablets where the isomer and the carrier have to be declared. Specification: - MK-7 content: 0.9–1.1% (HPLC) - all-trans isomer: ≥92% of MK-7 (HPLC) - Appearance: Pale yellow to yellow powder - Identification: HPLC retention time conforms - Loss on drying: ≤5.0% - Carrier: Starch or gum arabic, declared on the certificate - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Gummies and chews, Functional beverages - Solubility: Dispersible in water; MK-7 itself is fat-soluble and is carried on a water-dispersible matrix. #### Vitamin D3 URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-d3/ Chemical form: Cholecalciferol 100,000 IU/g spray-dried powder on carrier Formula: C₂₇H₄₄O CAS: 67-97-0 Summary: Cholecalciferol as a 100,000 IU/g spray-dried powder, specified for vitamin D3 content and carrier, for capsules, tablets and powder blends where the IU figure and the carrier have to be declared. Specification: - Vitamin D3: ≥100,000 IU/g (HPLC) - Appearance: White to cream, water-dispersible powder - Identification: HPLC retention time conforms - Loss on drying: ≤5.0% - Carrier: Starch, gum arabic or maltodextrin, declared - Particle size: ≥95% through 40 mesh - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Gummies and chews, Functional beverages - Solubility: Dispersible in water; the vitamin is fat-soluble and is carried on a water-dispersible matrix. #### Folic Acid URL: https://nutrition.rainwoodbio.com/products/vitamins/folic-acid/ Chemical form: Folic acid, crystalline Formula: C₁₉H₁₉N₇O₆ CAS: 59-30-3 Summary: Folic acid specified at 97.0–102.0% on the anhydrous basis, for capsules and tablets where the folate form, the assay basis and the related-substance profile have to be declared. Specification: - Assay (anhydrous basis): 97.0–102.0% (HPLC) - Appearance: Yellow to orange crystalline powder - Identification: IR and UV conform - Loss on drying: ≤8.5% - Residue on ignition: ≤0.3% - Related substances: ≤2.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Gummies and chews - Solubility: Slightly soluble in water; soluble in dilute alkali. Protect from light. #### Niacinamide URL: https://nutrition.rainwoodbio.com/products/vitamins/niacinamide/ Chemical form: Niacinamide, crystalline Formula: C₆H₆N₂O CAS: 98-92-0 Summary: Niacinamide specified at 99.0–101.0% by HPLC, with nicotinic acid controlled, for capsules, tablets and powder blends where the niacinamide form has to be distinguished from niacin. Specification: - Assay: 99.0–101.0% (HPLC) - Appearance: White crystalline powder - Identification: IR conforms - pH (10% solution): 5.5–7.5 - Melting range: 128–131 °C - Loss on drying: ≤0.5% - Residue on ignition: ≤0.1% - Nicotinic acid: ≤10 ppm - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Gummies and chews, Functional beverages - Solubility: Freely soluble in water; the 10% solution is close to neutral (pH 5.5–7.5). #### Vitamin B1 URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-b1/ Chemical form: Thiamine hydrochloride, crystalline Formula: C₁₂H₁₇ClN₄OS·HCl CAS: 67-03-8 Summary: Thiamine hydrochloride specified at 98.5–101.5% on the dried basis, for capsules, tablets and powder blends where the salt form and the water content have to be declared. Specification: - Assay (dried basis): 98.5–101.5% (titration) - Appearance: White or almost white crystalline powder - Identification: IR conforms - pH (2.5% solution): 2.7–3.3 - Water (Karl Fischer): ≤5.0% - Sulfated ash: ≤0.1% - Nitrate: Passes test - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Gummies and chews, Functional beverages - Solubility: Freely soluble in water; the 2.5% solution is acidic (pH 2.7–3.3). #### Vitamin B2 URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-b2/ Chemical form: Riboflavin, crystalline Formula: C₁₇H₂₀N₄O₆ CAS: 83-88-5 Summary: Riboflavin specified at 98.0–102.0% on the dried basis, for capsules, tablets and powder blends where the colour, the crystal form and the light sensitivity decide the grade. Specification: - Assay (dried basis): 98.0–102.0% (HPLC) - Appearance: Yellow to orange-yellow crystalline powder - Identification: IR and UV conform - Loss on drying: ≤1.5% - Residue on ignition: ≤0.3% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Gummies and chews, Functional beverages - Solubility: Slightly soluble in water; the solution is yellow-green with strong yellow-green fluorescence. #### Vitamin B6 URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-b6/ Chemical form: Pyridoxine hydrochloride, crystalline Formula: C₈H₁₁NO₃·HCl CAS: 58-56-0 Summary: Pyridoxine hydrochloride specified at 99.0–101.0% on the dried basis, for capsules, tablets and powder blends where the salt form, the chloride figure and the water content have to be declared. Specification: - Assay (dried basis): 99.0–101.0% (titration) - Appearance: White or almost white crystalline powder - Identification: IR conforms - pH (5% solution): 2.4–3.0 - Loss on drying: ≤0.5% - Residue on ignition: ≤0.1% - Chloride: 16.9–17.6% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Gummies and chews - Solubility: Freely soluble in water; the 5% solution is acidic (pH 2.4–3.0). #### Biotin URL: https://nutrition.rainwoodbio.com/products/vitamins/biotin/ Chemical form: D-biotin, crystalline Formula: C₁₀H₁₆N₂O₃S CAS: 58-85-5 Summary: D-biotin specified at 97.5–102.0% by HPLC, for capsules, tablets and powder blends where the low dose makes the dilution, the assay and the blend uniformity the real specification. Specification: - Assay: 97.5–102.0% (HPLC) - Appearance: White crystalline powder - Identification: IR conforms - Specific rotation: +89° to +93° (2% in 0.1 M NaOH) - Loss on drying: ≤1.0% - Residue on ignition: ≤0.1% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Gummies and chews - Solubility: Sparingly soluble in water; soluble in dilute alkali. The low dose usually needs a dilution. #### Vitamin E URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-e/ Chemical form: dl-alpha-Tocopheryl acetate 50% water-dispersible powder Formula: C₃₁H₅₂O₃ CAS: 7695-91-2 Summary: dl-alpha-tocopheryl acetate as a 50% water-dispersible powder, specified for tocopheryl acetate content and carrier, for capsules, tablets and powder blends where the form and the carrier have to be declared. Specification: - Tocopheryl acetate: 50.0–55.0% (HPLC) - Appearance: White to off-white, free-flowing powder - Identification: HPLC retention time conforms - Loss on drying: ≤5.0% - Carrier: Modified starch and silicon dioxide, declared - Dispersibility: Dispersible in cool water, forming a milky emulsion - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: 100% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Gummies and chews, Functional beverages - Solubility: Dispersible in cool water, forming a milky emulsion; the vitamin itself is fat-soluble. #### Vitamin B12 URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-b12/ Chemical form: Cyanocobalamin 1% spray-dried powder Formula: C₆₃H₈₈CoN₁₄O₁₄P CAS: 68-19-9 Summary: Cyanocobalamin as a 1% spray-dried powder, specified for vitamin B12 content and carrier, for capsules, tablets and sticks where the low dose makes the dilution and the assay the real specification. Specification: - Vitamin B12 (HPLC): ≥1.0% - Appearance: Pale red to pink, fine powder - Identification: UV maxima at 361 ± 1 nm and 550 ± 2 nm - Loss on drying: ≤12.0% - Carrier: Starch or maltodextrin, declared - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Gummies and chews - Solubility: Soluble in water; the solution is red at typical use levels. #### Vitamin A URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-a/ Chemical form: Retinyl acetate 500,000 IU/g powder Formula: C₂₂H₃₂O₂ CAS: 127-47-9 Summary: Retinyl acetate as a 500,000 IU/g spray-dried powder, specified for vitamin A content and carrier, for capsules and tablets where the IU figure and the carrier have to be declared. Specification: - Vitamin A (HPLC): ≥500,000 IU/g - Appearance: Light yellow to yellow, fine powder - Identification: HPLC retention time conforms - Loss on drying: ≤5.0% - Carrier: Gelatin, sucrose and starch, declared - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Dispersible in warm water; the vitamin is fat-soluble and is carried in a protective matrix. #### Niacin URL: https://nutrition.rainwoodbio.com/products/vitamins/niacin/ Chemical form: Nicotinic acid, crystalline Formula: C₆H₅NO₂ CAS: 59-67-6 Summary: Nicotinic acid specified at 99.0–101.0% on the dried basis, for capsules and tablets where the niacin form, the melting range and the free-acid character have to be declared. Specification: - Assay (dried basis): 99.0–101.0% (titration) - Appearance: White to slightly yellow crystalline powder - Identification: IR and UV conform - Melting range: 234–238 °C - Loss on drying: ≤1.0% - Residue on ignition: ≤0.1% - Chloride: ≤0.02% - Sulfate: ≤0.02% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Sparingly soluble in water; the solution is acidic. #### Choline Bitartrate URL: https://nutrition.rainwoodbio.com/products/vitamins/choline/ Chemical form: Choline bitartrate, crystalline Formula: C₉H₁₉NO₇ CAS: 87-67-2 Summary: Choline bitartrate specified at 96.5–100.5% on the as-is basis and 40.5–41.5% choline, for capsules and tablets where the salt form and the choline figure have to be declared. Specification: - Assay (as-is basis): 96.5–100.5% (titration) - Choline: 40.5–41.5% (HPLC) - Appearance: White crystalline powder - Identification: IR conforms - Loss on drying: ≤1.0% - pH (5% solution): 3.0–4.5 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Freely soluble in water; the 5% solution is acidic (pH 3.0–4.5). #### PABA URL: https://nutrition.rainwoodbio.com/products/vitamins/paba/ Chemical form: para-Aminobenzoic acid, powder Formula: C₇H₇NO₂ CAS: 150-13-0 Summary: PABA specified at 99.0–101.0% by HPLC, with loss on drying, pH and heavy metals; the free acid and the cosmetic esters are different materials. Specification: - Assay (HPLC): 99.0–101.0% - Appearance: White to off-white crystalline powder - Identification: IR and HPLC conform - Loss on drying: ≤0.5% - pH (1% suspension): 3.0–4.5 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Slightly soluble in water; soluble in ethanol and in alkaline solutions. #### Vitamin B5 URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-b5/ Chemical form: Calcium D-pantothenate, powder Formula: C₁₈H₃₂CaN₂O₁₀ CAS: 137-08-6 Summary: Vitamin B5 as calcium D-pantothenate, specified at 98.0–101.0% on the dried basis with 8.0–8.6% calcium; the salt, the rotation and the calcium figure are part of the specification. Specification: - Assay (dried basis): 98.0–101.0% (HPLC) - Calcium (titration): 8.0–8.6% - Appearance: White powder - Identification: IR and HPLC conform - Specific rotation: +25.0° to +28.5° (dry basis) - Loss on drying: ≤5.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Freely soluble in water; the solution is neutral. #### Vitamin K1 URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k1/ Chemical form: Phytonadione, oil Formula: C₃₁H₄₆O₂ CAS: 84-80-0 Summary: Vitamin K1 as phytonadione oil, specified at 97.0–103.0% by HPLC with a refractive index window; the oil form, the isomer ratio and the light-sensitive pack are part of the specification. Specification: - Assay (HPLC): 97.0–103.0% - Appearance: Clear yellow to amber viscous oil - Identification: HPLC and UV conform - Refractive index: 1.525–1.528 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg amber bottle; 5 kg amber bottle - Applications: Softgel capsules, Oil-based blends - Solubility: Practically insoluble in water; soluble in fats and in organic solvents. #### Beta-Carotene URL: https://nutrition.rainwoodbio.com/products/vitamins/beta-carotene/ Chemical form: β-Carotene 10% powder, cold-water dispersible Formula: C₄₀H₅₆ CAS: 7235-40-7 Summary: Beta-carotene as a 10% cold-water-dispersible powder, specified at 10.0–11.0% by UV/Vis; the dispersion, the carrier and the colour are part of the specification. Specification: - Assay (UV/Vis): 10.0–11.0% β-carotene - Appearance: Orange-red to red powder - Identification: UV/Vis conform - Loss on drying: ≤5.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Dispersible in water as supplied; the carotenoid itself is fat-soluble. #### Vitamin K2 MK-4 URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k2-mk-4/ Chemical form: Menaquinone-4, powder Formula: C₃₁H₄₀O₂ CAS: 863-61-6 Summary: Vitamin K2 MK-4 specified at 98.0–102.0% by HPLC; the menaquinone form, the isomer and the light-sensitive pack are part of the specification. Specification: - Assay (HPLC): 98.0–102.0% - Appearance: Yellow crystalline powder - Identification: HPLC and UV conform - Loss on drying: ≤0.5% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Oil-based blends - Solubility: Practically insoluble in water; soluble in fats and in organic solvents. #### 5-MTHF URL: https://nutrition.rainwoodbio.com/products/vitamins/5-mthf/ Chemical form: Calcium L-5-methyltetrahydrofolate, powder Formula: C₂₀H₂₃CaN₇O₆ CAS: 151533-22-1 Summary: 5-MTHF as the calcium salt, specified at 95.0–101.0% by HPLC with water, pH and the isomer profile; the active folate form and the salt are part of the specification. Specification: - Assay (HPLC): 95.0–101.0% - Appearance: White to off-white powder - Identification: HPLC and UV conform - Water (Karl Fischer): ≤5.0% - pH (1% solution): 6.0–8.0 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Soluble in water; the solution is neutral to slightly alkaline. #### Vitamin D2 URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-d2/ Chemical form: Ergocalciferol, powder Formula: C₂₈H₄₄O CAS: 50-14-6 Summary: Vitamin D2 as ergocalciferol, specified at 97.0–103.0% by HPLC with melting point and the isomer profile; the D2 form and the carrier are part of the specification. Specification: - Assay (HPLC): 97.0–103.0% - Appearance: White crystalline powder - Identification: HPLC and UV conform - Melting point: 115–118 °C - Loss on drying: ≤0.5% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Oil-based blends - Solubility: Practically insoluble in water; soluble in fats and in organic solvents. #### Pantothenic Acid URL: https://nutrition.rainwoodbio.com/products/vitamins/pantothenic-acid/ Chemical form: D-Pantothenic acid, powder Formula: C₉H₁₇NO₅ CAS: 79-83-4 Summary: Pantothenic acid specified at 98.0–101.0% by HPLC with loss on drying and pH; the free acid and the calcium salt are different products and different labels. Specification: - Assay (HPLC): 98.0–101.0% - Appearance: White to off-white powder - Identification: HPLC and IR conform - Loss on drying: ≤5.0% - pH (5% solution): 2.5–3.5 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Freely soluble in water; the solution is acidic. #### Beta-Carotene Pure URL: https://nutrition.rainwoodbio.com/products/vitamins/beta-carotene-pure/ Chemical form: β-Carotene, crystalline powder Formula: C₄₀H₅₆ CAS: 7235-40-7 Summary: Beta-carotene pure specified at ≥97.0% by UV/Vis; the crystalline grade and the 10% dispersion are different products with different assay bases and handling. Specification: - Assay (UV/Vis): ≥97.0% - Appearance: Red to orange-red crystalline powder - Identification: UV/Vis conform - Loss on drying: ≤0.5% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Softgel capsules, Oil-based blends - Solubility: Insoluble in water; soluble in fats and in organic solvents. #### Vitamin K1 1% Powder URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k1-powder/ Chemical form: Phytonadione 1% powder on carrier Formula: C₃₁H₄₆O₂ CAS: 84-80-0 Summary: Vitamin K1 1% powder specified at 1.0–1.1% phytonadione by HPLC on a carrier; the powder and the oil are different products with different handling and dosage forms. Specification: - Assay (HPLC): 1.0–1.1% - Appearance: Light yellow to yellow powder - Identification: HPLC and UV conform - Loss on drying: ≤5.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Dispersible in water as supplied; the oil itself is fat-soluble. #### Thiamine Mononitrate URL: https://nutrition.rainwoodbio.com/products/vitamins/thiamine-mononitrate/ Chemical form: Thiamine mononitrate, powder Formula: C₁₂H₁₇N₅O₄S CAS: 532-43-4 Summary: Thiamine mononitrate specified at 98.0–101.0% by HPLC with loss on drying and pH; the mononitrate and the hydrochloride are different salts and different labels. Specification: - Assay (HPLC): 98.0–101.0% - Appearance: White to off-white powder - Identification: HPLC and IR conform - Loss on drying: ≤1.0% - pH (5% solution): 6.5–7.5 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Soluble in water; the solution is neutral to slightly acidic. #### Riboflavin 5-Phosphate URL: https://nutrition.rainwoodbio.com/products/vitamins/riboflavin-5-phosphate/ Chemical form: Riboflavin 5-phosphate, powder Formula: C₁₇H₂₁N₄O₉P CAS: 146-17-8 Summary: Riboflavin 5-phosphate specified at ≥95.0% by HPLC with loss on drying and pH; the phosphorylated form and plain riboflavin are different products and different labels. Specification: - Assay (HPLC): ≥95.0% - Appearance: Yellow to orange-yellow powder - Identification: HPLC and UV conform - Loss on drying: ≤8.0% - pH (1% solution): 5.0–6.5 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Soluble in water; the solution is yellow and slightly acidic. #### Pyridoxal 5-Phosphate URL: https://nutrition.rainwoodbio.com/products/vitamins/pyridoxal-5-phosphate/ Chemical form: Pyridoxal 5-phosphate, powder Formula: C₈H₁₀NO₆P CAS: 54-47-7 Summary: Pyridoxal 5-phosphate specified at 98.0–101.0% by HPLC with loss on drying and pH; the phosphorylated form and pyridoxine hydrochloride are different products and different labels. Specification: - Assay (HPLC): 98.0–101.0% - Appearance: White to off-white powder - Identification: HPLC and UV conform - Loss on drying: ≤8.0% - pH (1% solution): 3.0–4.5 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Soluble in water; the solution is acidic. #### Methylcobalamin URL: https://nutrition.rainwoodbio.com/products/vitamins/methylcobalamin/ Chemical form: Methylcobalamin, crystalline powder Formula: C₆₃H₉₁CoN₁₃O₁₄P CAS: 13422-55-4 Summary: Methylcobalamin specified at 98.0–101.0% by HPLC with loss on drying and identity; the methyl form and cyanocobalamin are different products and different labels. Specification: - Assay (HPLC): 98.0–101.0% - Appearance: Dark red crystalline powder - Identification: HPLC and UV conform - Loss on drying: ≤10.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Slightly soluble in water; the solution is red. #### Retinyl Palmitate URL: https://nutrition.rainwoodbio.com/products/vitamins/retinyl-palmitate/ Chemical form: Retinyl palmitate 1.0 MIU/g powder Formula: C₃₆H₆₀O₂ CAS: 79-81-2 Summary: Retinyl palmitate specified at 1.0–1.1 MIU/g by HPLC on a carrier; the palmitate ester and the acetate ester are different products with different stability and labels. Specification: - Assay (HPLC): 1.0–1.1 MIU/g - Appearance: Light yellow to yellow powder - Identification: HPLC and UV conform - Loss on drying: ≤5.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Dispersible in water as supplied; the ester is fat-soluble. #### Retinol URL: https://nutrition.rainwoodbio.com/products/vitamins/retinol/ Chemical form: Retinol, oil Formula: C₂₀H₃₀O CAS: 68-26-8 Summary: Retinol specified at ≥95.0% by HPLC as an oil; the free alcohol and the retinyl esters are different products with different stability and handling. Specification: - Assay (HPLC): ≥95.0% - Appearance: Yellow to amber oil - Identification: HPLC and UV conform - Peroxide value: ≤10.0 meq O₂/kg - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg amber bottle; 5 kg amber bottle - Applications: Softgel capsules, Oil-based blends - Solubility: Insoluble in water; soluble in fats and in organic solvents. #### Vitamin D3 Oil URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-d3-oil/ Chemical form: Cholecalciferol 1.0 MIU/g oil Formula: C₂₇H₄₄O CAS: 67-97-0 Summary: Vitamin D3 oil specified at 1.0–1.1 MIU/g by HPLC with peroxide value; the oil and the spray-dried powder are different products with different carriers and dosage forms. Specification: - Assay (HPLC): 1.0–1.1 MIU/g - Appearance: Clear, pale yellow oil - Identification: HPLC and UV conform - Peroxide value: ≤10.0 meq O₂/kg - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg amber bottle; 5 kg amber bottle - Applications: Softgel capsules, Oil-based blends - Solubility: Insoluble in water; soluble in fats and in organic solvents. #### Sodium Ascorbate URL: https://nutrition.rainwoodbio.com/products/vitamins/sodium-ascorbate/ Chemical form: Sodium ascorbate, powder Formula: C₆H₇NaO₆ CAS: 134-03-2 Summary: Sodium ascorbate specified at 99.0–101.0% by titration with pH and loss on drying; the sodium salt and ascorbic acid are different products with different pH and sodium load. Specification: - Assay (titration): 99.0–101.0% - Appearance: White to off-white powder - Identification: IR and titration conform - Loss on drying: ≤0.5% - pH (10% solution): 6.5–7.5 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Freely soluble in water; the solution is neutral. #### Calcium Ascorbate URL: https://nutrition.rainwoodbio.com/products/vitamins/calcium-ascorbate/ Chemical form: Calcium ascorbate, powder Formula: C₁₂H₁₄CaO₁₂·2H₂O CAS: 5743-27-1 Summary: Calcium ascorbate specified at 99.0–101.0% by titration with 9.0–10.0% calcium; the calcium salt and ascorbic acid are different products with different pH and mineral load. Specification: - Assay (titration): 99.0–101.0% - Calcium (complexometric): 9.0–10.0% - Appearance: White to off-white powder - Identification: IR and titration conform - Loss on drying: ≤2.0% - pH (10% solution): 6.0–7.5 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Soluble in water; the solution is neutral. #### Ascorbyl Palmitate URL: https://nutrition.rainwoodbio.com/products/vitamins/ascorbyl-palmitate/ Chemical form: Ascorbyl palmitate, powder Formula: C₂₂H₃₈O₇ CAS: 137-66-6 Summary: Ascorbyl palmitate specified at ≥95.0% by HPLC with melting point and loss on drying; the fat-soluble ester and ascorbic acid are different products with different solubility and use. Specification: - Assay (HPLC): ≥95.0% - Appearance: White to off-white powder - Identification: HPLC and IR conform - Melting point: 107–117 °C - Loss on drying: ≤1.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Softgel capsules, Oil-based blends - Solubility: Insoluble in water; soluble in fats and in organic solvents. #### Natural Tocopherol URL: https://nutrition.rainwoodbio.com/products/vitamins/natural-tocopherol/ Chemical form: d-alpha-Tocopherol, oil Formula: C₂₉H₅₀O₂ CAS: 59-02-9 Summary: Natural tocopherol specified at ≥90.0% d-alpha-tocopherol by HPLC with peroxide value; the natural alcohol and the synthetic acetate are different products with different labels and IU. Specification: - Assay (HPLC): ≥90.0% d-alpha-tocopherol - Appearance: Yellow to amber oil - Identification: HPLC and UV conform - Peroxide value: ≤10.0 meq O₂/kg - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg amber bottle; 5 kg amber bottle - Applications: Softgel capsules, Oil-based blends - Solubility: Insoluble in water; soluble in fats and in organic solvents. #### Tocopheryl Succinate URL: https://nutrition.rainwoodbio.com/products/vitamins/tocopheryl-succinate/ Chemical form: d-alpha-Tocopheryl succinate, powder Formula: C₃₃H₅₄O₅ CAS: 4345-03-3 Summary: Tocopheryl succinate specified at ≥95.0% by HPLC with melting point and loss on drying; the succinate and the acetate are different esters with different solubility and handling. Specification: - Assay (HPLC): ≥95.0% - Appearance: White to off-white powder - Identification: HPLC and IR conform - Melting point: 73–76 °C - Loss on drying: ≤1.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Insoluble in water; soluble in fats and in organic solvents. #### D-Chiro Inositol URL: https://nutrition.rainwoodbio.com/products/vitamins/d-chiro-inositol/ Chemical form: D-Chiro-inositol, powder Formula: C₆H₁₂O₆ CAS: 643-12-9 Summary: D-Chiro-inositol specified at ≥98.0% by HPLC with melting point and loss on drying; the D-chiro isomer and myo-inositol are different products with different labels and ratios. Specification: - Assay (HPLC): ≥98.0% - Appearance: White to off-white powder - Identification: HPLC and IR conform - Melting point: 225–230 °C - Loss on drying: ≤0.5% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Soluble in water; the solution is clear. #### Niacin Inositol Hexanicotinate URL: https://nutrition.rainwoodbio.com/products/vitamins/niacin-inositol-hexanicotinate/ Chemical form: Inositol hexanicotinate, powder Formula: C₄₂H₃₀N₆O₁₂ CAS: 6556-11-2 Summary: Inositol hexanicotinate specified at 98.0–101.0% by HPLC with loss on drying; the ester and plain niacin are different products with different flush profiles and labels. Specification: - Assay (HPLC): 98.0–101.0% - Appearance: White to off-white powder - Identification: HPLC and IR conform - Loss on drying: ≤1.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Slightly soluble in water; soluble in organic solvents. #### Vitamin K2 MK-7 Oil URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k2-mk7-oil/ Chemical form: Menaquinone-7 1% oil Formula: C₄₆H₆₄O₂ CAS: 2124-57-4 Summary: Vitamin K2 MK-7 oil specified at 1.0–1.1% menaquinone-7 by HPLC with peroxide value; the oil and the spray-dried MK-7 powder are different products with different carriers and overage. Specification: - Assay (HPLC): 1.0–1.1% MK-7 - Appearance: Yellow to amber oil - Identification: HPLC and UV conform - Peroxide value: ≤10.0 meq O₂/kg - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg amber bottle; 5 kg amber bottle - Applications: Softgel capsules, Oil-based blends - Solubility: Insoluble in water; soluble in fats and in organic solvents. #### Vitamin D2 Oil URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-d2-oil/ Chemical form: Ergocalciferol 1.0 MIU/g oil Formula: C₂₈H₄₄O CAS: 50-14-6 Summary: Vitamin D2 oil specified at 1.0–1.1 MIU/g by HPLC with peroxide value; the oil and the spray-dried D2 powder are different products with different carriers and dosage forms. Specification: - Assay (HPLC): 1.0–1.1 MIU/g - Appearance: Clear, pale yellow oil - Identification: HPLC and UV conform - Peroxide value: ≤10.0 meq O₂/kg - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg amber bottle; 5 kg amber bottle - Applications: Softgel capsules, Oil-based blends - Solubility: Insoluble in water; soluble in fats and in organic solvents. #### Adenosylcobalamin URL: https://nutrition.rainwoodbio.com/products/vitamins/adenosylcobalamin/ Chemical form: Adenosylcobalamin, crystalline powder Formula: C₇₂H₁₀₀CoN₁₈O₁₇P CAS: 13870-90-1 Summary: Adenosylcobalamin specified at ≥95.0% by HPLC with loss on drying and identity; the adenosyl form and methylcobalamin are different products with different stability and labels. Specification: - Assay (HPLC): ≥95.0% - Appearance: Red-orange to dark red powder - Identification: HPLC and UV conform - Loss on drying: ≤10.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Slightly soluble in water; the solution is red. #### Vitamin K2 MK-4 Oil URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k2-mk4-oil/ Chemical form: Menaquinone-4 1% oil Formula: C₃₁H₄₀O₂ CAS: 863-61-6 Summary: Vitamin K2 MK-4 oil specified at 1.0–1.1% menaquinone-4 by HPLC with peroxide value; the oil and the spray-dried MK-4 powder are different products with different carriers and overage. Specification: - Assay (HPLC): 1.0–1.1% MK-4 - Appearance: Yellow to amber oil - Identification: HPLC and UV conform - Peroxide value: ≤10.0 meq O₂/kg - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg amber bottle; 5 kg amber bottle - Applications: Softgel capsules, Oil-based blends - Solubility: Insoluble in water; soluble in fats and in organic solvents. #### Mixed Tocopherols URL: https://nutrition.rainwoodbio.com/products/vitamins/mixed-tocopherols/ Chemical form: Mixed tocopherols, oil Formula: — CAS: 1406-66-2 Summary: Mixed tocopherols specified at ≥90.0% total tocopherols with a defined alpha/gamma/delta profile; the mixture and single alpha-tocopherol are different products with different antioxidant and label positions. Specification: - Total tocopherols (HPLC): ≥90.0% - Alpha-tocopherol: 10.0–20.0% - Gamma-tocopherol: 50.0–70.0% - Delta-tocopherol: 10.0–20.0% - Appearance: Yellow to amber oil - Peroxide value: ≤10.0 meq O₂/kg - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg amber bottle; 5 kg amber bottle - Applications: Softgel capsules, Oil-based blends - Solubility: Insoluble in water; soluble in fats and in organic solvents. #### Choline Chloride URL: https://nutrition.rainwoodbio.com/products/vitamins/choline-chloride/ Chemical form: Choline chloride, powder Formula: C₅H₁₄ClNO CAS: 67-48-1 Summary: Choline chloride specified at 98.0–101.0% by titration with pH and loss on drying; the chloride salt and choline bitartrate are different products with different counter-ion and choline content. Specification: - Assay (titration): 98.0–101.0% - Appearance: White to off-white powder - Identification: Choline and chloride conform - Loss on drying: ≤1.0% - pH (10% solution): 6.0–8.0 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Freely soluble in water; the solution is neutral to slightly acidic. ### Amino Acids An amino acid can be 98% pure and still be the wrong material: the D enantiomer, the fermentation route and the residual amino acids all change what the buyer has. This range is built around chiral purity, source and the impurity profile, with the method named for each. A grade is published only when the enantiomer figure and the route are both documented. #### Taurine URL: https://nutrition.rainwoodbio.com/products/amino-acids/taurine/ Chemical form: 2-aminoethanesulfonic acid, crystalline Formula: C₂H₇NO₃S CAS: 107-35-7 Summary: Taurine specified at 98.5–101.5% on the dried basis, for capsules, sticks and sports powders where the assay basis and the impurity panel decide the grade. Specification: - Assay (dried basis): 98.5–101.5% (HPLC or titration) - Appearance: White crystalline powder - Identification: IR conforms - Loss on drying: ≤0.3% - Residue on ignition: ≤0.1% - Chloride: ≤0.05% - Sulfate: ≤0.03% - Iron: ≤30 ppm - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Particle size: 20–200 mesh - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Sports and energy powders, Functional beverages - Solubility: Freely soluble in water; the 5% solution is acidic (pH 4.0–6.0). #### Glycine URL: https://nutrition.rainwoodbio.com/products/amino-acids/glycine/ Chemical form: Glycine, crystalline Formula: C₂H₅NO₂ CAS: 56-40-6 Summary: Glycine specified at 98.5–101.5% on the dried basis, for capsules, tablets and powder blends where the assay basis and the reducing-sugar risk decide the grade. Specification: - Assay (dried basis): 98.5–101.5% (titration) - Appearance: White crystalline powder - Identification: IR conforms - Loss on drying: ≤0.2% - Residue on ignition: ≤0.1% - Chloride: ≤0.1% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Gummies and chews, Functional beverages - Solubility: Freely soluble in water; the 5% solution is close to neutral. #### L-Carnitine URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-carnitine/ Chemical form: L-carnitine base, crystalline Formula: C₇H₁₅NO₃ CAS: 541-15-1 Summary: L-carnitine base specified at 98.0–102.0% on the anhydrous basis, for capsules, tablets and powder blends where the salt form and the water content decide the fill. Specification: - Assay (anhydrous basis): 98.0–102.0% (HPLC) - Appearance: White crystalline powder - Identification: IR conforms - Specific rotation: −29.0° to −32.0° (10% solution) - Loss on drying: ≤0.5% - Residue on ignition: ≤0.1% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Sports and energy powders, Functional beverages - Solubility: Freely soluble in water; the base is hygroscopic and picks up water in an open pack. #### L-Arginine URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-arginine/ Chemical form: L-arginine base, crystalline Formula: C₆H₁₄N₄O₂ CAS: 74-79-3 Summary: L-arginine base specified at 98.5–101.5% on the dried basis, for capsules, tablets and powder blends where the free base, the pH and the water content have to be declared. Specification: - Assay (dried basis): 98.5–101.5% (titration) - Appearance: White crystalline powder - Identification: IR and ninhydrin reaction conform - Specific rotation: +26.3° to +27.7° (dried basis) - Loss on drying: ≤0.5% - Residue on ignition: ≤0.1% - pH (5% solution): 10.5–12.0 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Sports powders - Solubility: Freely soluble in water; the 5% solution is strongly alkaline (pH 10.5–12.0). #### L-Tyrosine URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-tyrosine/ Chemical form: L-tyrosine, crystalline Formula: C₉H₁₁NO₃ CAS: 60-18-4 Summary: L-tyrosine specified at 99.0–101.0% on the dried basis, for capsules, tablets and powder blends where the low solubility, the rotation and the water content have to be declared. Specification: - Assay (dried basis): 99.0–101.0% (HPLC) - Appearance: White crystalline powder - Identification: IR and ninhydrin reaction conform - Specific rotation: −11.0° to −12.3° (dried basis, 1 N HCl) - Loss on drying: ≤0.5% - Residue on ignition: ≤0.1% - pH (saturated solution): 5.0–7.0 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Sparingly soluble in water; soluble in dilute acid and alkali. #### L-Tryptophan URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-tryptophan/ Chemical form: L-tryptophan, crystalline Formula: C₁₁H₁₂N₂O₂ CAS: 73-22-3 Summary: L-tryptophan specified at 98.5–101.5% on the dried basis, for capsules and tablets where the L form, the light sensitivity and the related-substance profile have to be declared. Specification: - Assay (dried basis): 98.5–101.5% (HPLC) - Appearance: White to off-white crystalline powder - Identification: IR and ninhydrin reaction conform - Specific rotation: −29.4° to −32.8° (dried basis) - Loss on drying: ≤0.5% - Residue on ignition: ≤0.1% - pH (1% solution): 5.5–7.0 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Sparingly soluble in water; soluble in dilute acid and alkali. #### L-Citrulline URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-citrulline/ Chemical form: L-citrulline, crystalline Formula: C₆H₁₃N₃O₃ CAS: 372-75-8 Summary: L-citrulline specified at 98.5–101.5% on the dried basis, for capsules, tablets and sports powders where the free amino acid, the rotation and the water content have to be declared. Specification: - Assay (dried basis): 98.5–101.5% (titration) - Appearance: White crystalline powder - Identification: IR and ninhydrin reaction conform - Specific rotation: +21.5° to +23.5° (dried basis) - Loss on drying: ≤0.5% - Residue on ignition: ≤0.1% - pH (5% solution): 5.0–7.0 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Sports powders - Solubility: Freely soluble in water; the 5% solution is close to neutral (pH 5.0–7.0). #### L-Glutamine URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-glutamine/ Chemical form: L-glutamine, crystalline Formula: C₅H₁₀N₂O₃ CAS: 56-85-9 Summary: L-glutamine specified at 98.5–101.5% on the dried basis, for capsules and powder blends where the hygroscopicity, the heat sensitivity and the water content have to be declared. Specification: - Assay (dried basis): 98.5–101.5% (HPLC) - Appearance: White crystalline powder or flakes - Identification: IR and ninhydrin reaction conform - Specific rotation: +6.3° to +7.3° (dried basis) - Loss on drying: ≤0.5% - Residue on ignition: ≤0.3% - pH (5% solution): 5.0–6.5 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Sports powders - Solubility: Freely soluble in water; the 5% solution is slightly acidic (pH 5.0–6.5). #### L-Leucine URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-leucine/ Chemical form: L-leucine, crystalline Formula: C₆H₁₃NO₂ CAS: 61-90-5 Summary: L-leucine specified at 98.5–101.5% on the dried basis, for capsules, tablets and sports powders where the free amino acid, the rotation and the BCAA ratio have to be declared. Specification: - Assay (dried basis): 98.5–101.5% (titration) - Appearance: White crystalline powder - Identification: IR and ninhydrin reaction conform - Specific rotation: +14.9° to +17.3° (dried basis) - Loss on drying: ≤0.5% - Residue on ignition: ≤0.1% - pH (5% solution): 5.5–6.5 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Sports powders - Solubility: Sparingly soluble in water; soluble in dilute acid and alkali. #### L-Isoleucine URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-isoleucine/ Chemical form: L-isoleucine, crystalline Formula: C₆H₁₃NO₂ CAS: 73-32-5 Summary: L-isoleucine specified at 98.5–101.5% on the dried basis, for capsules, tablets and BCAA blends where the L form, the rotation and the ratio have to be declared. Specification: - Assay (dried basis): 98.5–101.5% (titration) - Appearance: White crystalline powder - Identification: IR and ninhydrin reaction conform - Specific rotation: +38.0° to +41.0° (dried basis) - Loss on drying: ≤0.5% - Residue on ignition: ≤0.1% - pH (5% solution): 5.5–6.5 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Sports powders - Solubility: Sparingly soluble in water; soluble in dilute acid and alkali. #### L-Valine URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-valine/ Chemical form: L-valine, crystalline Formula: C₅H₁₁NO₂ CAS: 72-18-4 Summary: L-valine specified at 98.5–101.5% on the dried basis, for capsules, tablets and BCAA blends where the L form, the rotation and the ratio have to be declared. Specification: - Assay (dried basis): 98.5–101.5% (titration) - Appearance: White crystalline powder - Identification: IR and ninhydrin reaction conform - Specific rotation: +26.6° to +28.8° (dried basis) - Loss on drying: ≤0.5% - Residue on ignition: ≤0.1% - pH (5% solution): 5.5–6.5 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Sports powders - Solubility: Sparingly soluble in water; soluble in dilute acid and alkali. #### L-Lysine Hydrochloride URL: https://nutrition.rainwoodbio.com/products/amino-acids/lysine/ Chemical form: L-lysine hydrochloride, crystalline Formula: C₆H₁₄N₂O₂·HCl CAS: 657-27-2 Summary: L-lysine hydrochloride specified at 98.5–101.5% on the dried basis, for capsules and tablets where the salt form, the chloride and the water content have to be declared. Specification: - Assay (dried basis): 98.5–101.5% (titration) - Appearance: White crystalline powder - Identification: IR and ninhydrin reaction conform - Specific rotation: +20.4° to +21.4° (dried basis) - Loss on drying: ≤0.5% - Residue on ignition: ≤0.1% - pH (5% solution): 5.0–6.0 - Chloride: 19.0–19.6% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Freely soluble in water; the 5% solution is slightly acidic (pH 5.0–6.0). #### N-Acetyl-L-Cysteine URL: https://nutrition.rainwoodbio.com/products/amino-acids/n-acetyl-l-cysteine/ Chemical form: N-acetyl-L-cysteine, crystalline Formula: C₅H₉NO₃S CAS: 616-91-1 Summary: N-acetyl-L-cysteine specified at 98.5–101.5% on the dried basis, for capsules and tablets where the acetylated form, the sulphur content and the water content have to be declared. Specification: - Assay (dried basis): 98.5–101.5% (HPLC) - Appearance: White crystalline powder - Identification: IR and thiol reaction conform - Specific rotation: +21.0° to +27.0° (dried basis) - Loss on drying: ≤0.5% - Residue on ignition: ≤0.1% - pH (1% solution): 2.0–3.0 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Freely soluble in water; the 1% solution is acidic (pH 2.0–3.0). #### Betaine URL: https://nutrition.rainwoodbio.com/products/amino-acids/betaine/ Chemical form: Betaine anhydrous, crystalline Formula: C₅H₁₁NO₂ CAS: 107-43-7 Summary: Anhydrous betaine specified at 97.5–102.5% by titration, for capsules, tablets and powder blends where the anhydrous form and the water content have to be declared. Specification: - Assay (anhydrous basis): 97.5–102.5% (titration) - Appearance: White crystalline powder - Identification: IR conforms - Loss on drying: ≤2.0% - Residue on ignition: ≤0.1% - pH (5% solution): 5.0–7.0 - Particle size: ≥95% through 30 mesh - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Sports powders - Solubility: Freely soluble in water; the 5% solution is close to neutral (pH 5.0–7.0). #### GABA URL: https://nutrition.rainwoodbio.com/products/amino-acids/gaba/ Chemical form: γ-Aminobutyric acid, powder Formula: C₄H₉NO₂ CAS: 56-12-2 Summary: GABA specified at 99.0–101.0% by HPLC, with loss on drying, pH and heavy metals; GABA is achiral, so the assay and the identity are the specification. Specification: - Assay (HPLC): 99.0–101.0% - Appearance: White crystalline powder - Identification: IR and HPLC conform - Loss on drying: ≤0.5% - pH (1% solution): 6.5–7.5 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Freely soluble in water; the solution is neutral. #### L-Aspartic Acid URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-aspartic-acid/ Chemical form: L-Aspartic acid, powder Formula: C₄H₇NO₄ CAS: 56-84-8 Summary: L-Aspartic acid specified at 98.5–101.5% by HPLC with a specific rotation of +24.0° to +26.5°; the enantiomer and the assay basis are part of the specification. Specification: - Assay (HPLC): 98.5–101.5% - Appearance: White crystalline powder - Identification: IR and HPLC conform - Specific rotation: +24.0° to +26.5° (dry basis) - Loss on drying: ≤0.5% - pH (1% solution): 2.5–4.0 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Slightly soluble in water; the solution is acidic. #### L-Histidine URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-histidine/ Chemical form: L-Histidine, powder Formula: C₆H₉N₃O₂ CAS: 71-00-1 Summary: L-Histidine specified at 98.5–101.5% by HPLC with a specific rotation of -38.0° to -41.0°; the free base and the hydrochloride are different specifications. Specification: - Assay (HPLC): 98.5–101.5% - Appearance: White crystalline powder - Identification: IR and HPLC conform - Specific rotation: -38.0° to -41.0° (dry basis) - Loss on drying: ≤0.5% - pH (1% solution): 7.0–9.0 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Soluble in water; the solution is alkaline. #### L-Phenylalanine URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-phenylalanine/ Chemical form: L-Phenylalanine, powder Formula: C₉H₁₁NO₂ CAS: 63-91-2 Summary: L-Phenylalanine specified at 98.5–101.5% by HPLC with a specific rotation of -33.0° to -35.5°; the enantiomer and the assay basis are part of the specification. Specification: - Assay (HPLC): 98.5–101.5% - Appearance: White crystalline powder - Identification: IR and HPLC conform - Specific rotation: -33.0° to -35.5° (dry basis) - Loss on drying: ≤0.5% - pH (1% solution): 5.0–7.0 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Slightly soluble in water; the solution is neutral. #### L-Proline URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-proline/ Chemical form: L-Proline, powder Formula: C₅H₉NO₂ CAS: 147-85-3 Summary: L-Proline specified at 98.5–101.5% by HPLC with a specific rotation of -84.0° to -86.5°; the enantiomer and the assay basis are part of the specification. Specification: - Assay (HPLC): 98.5–101.5% - Appearance: White crystalline powder - Identification: IR and HPLC conform - Specific rotation: -84.0° to -86.5° (dry basis) - Loss on drying: ≤0.5% - pH (1% solution): 5.0–7.0 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Freely soluble in water; the solution is neutral. #### L-Threonine URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-threonine/ Chemical form: L-Threonine, powder Formula: C₄H₉NO₃ CAS: 72-19-5 Summary: L-Threonine specified at 98.5–101.5% by HPLC with a specific rotation of -26.5° to -29.0°; the enantiomer and the assay basis are part of the specification. Specification: - Assay (HPLC): 98.5–101.5% - Appearance: White crystalline powder - Identification: IR and HPLC conform - Specific rotation: -26.5° to -29.0° (dry basis) - Loss on drying: ≤0.5% - pH (1% solution): 5.0–7.0 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Soluble in water; the solution is neutral. #### L-Alanine URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-alanine/ Chemical form: L-Alanine, powder Formula: C₃H₇NO₂ CAS: 56-41-7 Summary: L-Alanine specified at 98.5–101.5% by HPLC with a specific rotation of +14.0° to +15.0°; the enantiomer and the assay basis are part of the specification. Specification: - Assay (HPLC): 98.5–101.5% - Appearance: White crystalline powder - Identification: IR and HPLC conform - Specific rotation: +14.0° to +15.0° (dry basis) - Loss on drying: ≤0.5% - pH (1% solution): 5.0–7.0 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Freely soluble in water; the solution is neutral. #### L-Methionine URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-methionine/ Chemical form: L-Methionine, powder Formula: C₅H₁₁NO₂S CAS: 63-68-3 Summary: L-Methionine specified at 98.5–101.5% by HPLC with a specific rotation of +21.0° to +23.0°; the enantiomer and the sulfur content are part of the specification. Specification: - Assay (HPLC): 98.5–101.5% - Appearance: White crystalline powder - Identification: IR and HPLC conform - Specific rotation: +21.0° to +23.0° (dry basis) - Loss on drying: ≤0.5% - pH (1% solution): 5.0–7.0 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Soluble in water; the solution is neutral. #### L-Glutamic Acid URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-glutamic-acid/ Chemical form: L-Glutamic acid, powder Formula: C₅H₉NO₄ CAS: 56-86-0 Summary: L-Glutamic acid specified at 98.5–101.5% by HPLC with a specific rotation of +31.0° to +32.5°; the acidic side chain and the enantiomer are part of the specification. Specification: - Assay (HPLC): 98.5–101.5% - Appearance: White crystalline powder - Identification: IR and HPLC conform - Specific rotation: +31.0° to +32.5° (dry basis) - Loss on drying: ≤0.5% - pH (1% solution): 3.0–4.0 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Slightly soluble in water; the solution is acidic. #### L-Serine URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-serine/ Chemical form: L-Serine, powder Formula: C₃H₇NO₃ CAS: 56-45-1 Summary: L-Serine specified at 98.5–101.5% by HPLC with a specific rotation of +6.5° to +8.5°; the hydroxyl side chain and the enantiomer are part of the specification. Specification: - Assay (HPLC): 98.5–101.5% - Appearance: White crystalline powder - Identification: IR and HPLC conform - Specific rotation: +6.5° to +8.5° (dry basis) - Loss on drying: ≤0.5% - pH (1% solution): 5.0–7.0 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Freely soluble in water; the solution is neutral. #### Beta-Alanine URL: https://nutrition.rainwoodbio.com/products/amino-acids/beta-alanine/ Chemical form: β-Alanine, powder Formula: C₃H₇NO₂ CAS: 107-95-9 Summary: Beta-alanine specified at 99.0–101.0% by HPLC, with loss on drying, pH and heavy metals; beta-alanine is achiral and is a constitutional isomer of L-alanine. Specification: - Assay (HPLC): 99.0–101.0% - Appearance: White crystalline powder - Identification: IR and HPLC conform - Loss on drying: ≤0.5% - pH (1% solution): 5.0–7.0 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Freely soluble in water; the solution is neutral. #### L-Ornithine URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-ornithine/ Chemical form: L-Ornithine, powder Formula: C₅H₁₂N₂O₂ CAS: 70-26-8 Summary: L-Ornithine specified at 98.5–101.5% by HPLC with a specific rotation of +22.0° to +24.0°; the free base and the hydrochloride are different specifications. Specification: - Assay (HPLC): 98.5–101.5% - Appearance: White crystalline powder - Identification: IR and HPLC conform - Specific rotation: +22.0° to +24.0° (dry basis) - Loss on drying: ≤0.5% - pH (1% solution): 9.0–11.0 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Freely soluble in water; the solution is alkaline. #### L-Lysine URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-lysine/ Chemical form: L-Lysine free base, powder Formula: C₆H₁₄N₂O₂ CAS: 56-87-1 Summary: L-Lysine free base specified at 98.5–101.5% by titration with specific rotation; the free base and L-lysine hydrochloride are different products with different chloride and label positions. Specification: - Assay (titration): 98.5–101.5% - Appearance: White to off-white powder - Identification: IR and titration conform - Specific rotation: +25.0° to +27.0° (c=2, 5 M HCl) - Loss on drying: ≤0.5% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Freely soluble in water; the solution is alkaline. #### L-Arginine HCl URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-arginine-hcl/ Chemical form: L-Arginine hydrochloride, powder Formula: C₆H₁₄N₄O₂·HCl CAS: 1119-34-2 Summary: L-Arginine hydrochloride specified at 99.0–101.0% by titration with specific rotation; the hydrochloride and L-arginine free base are different products with different chloride and pH. Specification: - Assay (titration): 99.0–101.0% - Appearance: White to off-white powder - Identification: IR and titration conform - Specific rotation: +21.0° to +23.0° (c=2, 5 M HCl) - Loss on drying: ≤0.5% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Freely soluble in water; the solution is acidic. #### L-Ornithine HCl URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-ornithine-hcl/ Chemical form: L-Ornithine hydrochloride, powder Formula: C₅H₁₂N₂O₂·HCl CAS: 3184-13-2 Summary: L-Ornithine hydrochloride specified at 99.0–101.0% by titration with specific rotation; the hydrochloride and the free base are different products with different chloride and pH. Specification: - Assay (titration): 99.0–101.0% - Appearance: White to off-white powder - Identification: IR and titration conform - Specific rotation: +22.0° to +24.0° (c=2, 5 M HCl) - Loss on drying: ≤0.5% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Freely soluble in water; the solution is acidic. #### L-Cysteine HCl URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-cysteine-hcl/ Chemical form: L-Cysteine hydrochloride monohydrate, powder Formula: C₃H₇NO₂S·HCl·H₂O CAS: 7048-04-6 Summary: L-Cysteine hydrochloride monohydrate specified at 99.0–101.0% by titration with specific rotation; the hydrochloride and N-acetyl-L-cysteine are different products with different stability and labels. Specification: - Assay (titration): 99.0–101.0% - Appearance: White to off-white powder - Identification: IR and titration conform - Specific rotation: +6.0° to +7.5° (c=2, 5 M HCl) - Loss on drying: ≤0.5% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Freely soluble in water; the solution is acidic. #### L-Carnitine Tartrate URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-carnitine-tartrate/ Chemical form: L-Carnitine L-tartrate, powder Formula: C₁₈H₃₆N₂O₁₂ CAS: 36687-82-8 Summary: L-Carnitine L-tartrate specified at 98.0–102.0% by HPLC with 68.0–72.0% L-carnitine; the tartrate and L-carnitine base are different products with different carnitine content and fill weight. Specification: - Assay (HPLC): 98.0–102.0% - L-Carnitine content: 68.0–72.0% - Appearance: White to off-white powder - Identification: HPLC and IR conform - Loss on drying: ≤1.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Freely soluble in water; the solution is clear. #### Acetyl-L-Carnitine URL: https://nutrition.rainwoodbio.com/products/amino-acids/acetyl-l-carnitine/ Chemical form: Acetyl-L-carnitine hydrochloride, powder Formula: C₉H₁₇NO₄ CAS: 5080-50-2 Summary: Acetyl-L-carnitine specified at 98.0–101.0% by HPLC with specific rotation; the acetylated form and L-carnitine base are different products with different stability and labels. Specification: - Assay (HPLC): 98.0–101.0% - Appearance: White to off-white powder - Identification: HPLC and IR conform - Specific rotation: -28.0° to -30.0° (c=2, water) - Loss on drying: ≤1.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Freely soluble in water; the solution is acidic. #### L-Citrulline Malate URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-citrulline-malate/ Chemical form: L-Citrulline malate 1:1, powder Formula: C₆H₁₃N₃O₃·C₄H₆O₅ CAS: 54940-24-2 Summary: L-Citrulline malate 1:1 specified at 98.0–101.0% by HPLC with 55.0–60.0% L-citrulline; the salt and L-citrulline are different products with different acidity and fill weight. Specification: - Assay (HPLC): 98.0–101.0% - L-Citrulline content: 55.0–60.0% - Appearance: White to off-white powder - Identification: HPLC and IR conform - Loss on drying: ≤1.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Freely soluble in water; the solution is acidic. #### L-Theanine URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-theanine/ Chemical form: L-Theanine, powder Formula: C₇H₁₄N₂O₃ CAS: 3081-61-6 Summary: L-Theanine specified at 98.0–101.0% by HPLC with specific rotation; the L-enantiomer and D-theanine are different products, and the source route is part of the specification. Specification: - Assay (HPLC): 98.0–101.0% - Appearance: White to off-white powder - Identification: HPLC and IR conform - Specific rotation: +7.5° to +9.0° (c=2, water) - Loss on drying: ≤0.5% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Freely soluble in water; the solution is clear and slightly sweet. ### Protein & Collagen Peptides A protein figure can be measured by Kjeldahl nitrogen, by Dumas combustion or by amino acid analysis, and the three do not give the same number. Collagen peptides add a molecular weight distribution and a hydroxyproline figure that decide how the material behaves in a beverage. This range is built around the method, the profile and the declared basis, not around a single percentage. #### Collagen Peptides URL: https://nutrition.rainwoodbio.com/products/protein-collagen/collagen-peptides/ Chemical form: Hydrolysed bovine collagen, type I Formula: Collagen hydrolysate (peptide mixture) CAS: — Summary: Bovine collagen peptides specified at ≥90% protein and 8.0–12.0% hydroxyproline, with a molecular weight distribution for beverage and sachet formats. Specification: - Protein (dry basis): ≥90.0% (Kjeldahl, N × 5.55) - Hydroxyproline: 8.0–12.0% (colorimetric) - Molecular weight: ≥90% below 3,000 Da (SEC-HPLC) - Appearance: White to off-white powder - Moisture: ≤7.0% - Ash: ≤2.0% - pH (10% solution): 5.0–7.0 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Source: Bovine hide, type I - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Powder sticks and drink mixes, Functional beverages, Capsules and tablets, Gummies and chews - Solubility: Soluble in water; solutions are clear to slightly hazy depending on concentration and molecular weight. #### Fish Collagen Peptides URL: https://nutrition.rainwoodbio.com/products/protein-collagen/fish-collagen-peptides/ Chemical form: Fish skin collagen peptides, spray-dried Formula: Collagen hydrolysate (peptide mixture) CAS: 9007-34-5 Summary: Fish skin collagen peptides specified at ≥90% protein, 8–12% hydroxyproline and ≥90% below 3,000 Da, for capsules, sticks and beverages where the source and the molecular-weight profile have to be declared. Specification: - Protein (Kjeldahl N×5.55): ≥90.0% - Hydroxyproline: 8.0–12.0% (HPLC) - Molecular weight: ≥90% below 3,000 Da (SEC) - Appearance: White to off-white powder - Loss on drying: ≤7.0% - Ash: ≤2.0% - pH (5% solution): 5.0–7.0 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Functional beverages, Gummies and chews - Solubility: Soluble in water; the solution is clear to slightly hazy at typical use levels. #### Bone Collagen Peptides URL: https://nutrition.rainwoodbio.com/products/protein-collagen/bone-collagen-peptides/ Chemical form: Bovine bone collagen peptides, spray-dried Formula: Collagen hydrolysate (peptide mixture) CAS: 9007-34-5 Summary: Bovine bone collagen peptides specified at ≥90% protein, 8–12% hydroxyproline and ≥90% below 3,000 Da, for capsules and powder blends where the bone source, the ash and the BSE/TSE file have to be declared. Specification: - Protein (Kjeldahl N×5.55): ≥90.0% - Hydroxyproline: 8.0–12.0% (HPLC) - Molecular weight: ≥90% below 3,000 Da (SEC) - Appearance: White to off-white powder - Loss on drying: ≤7.0% - Ash: ≤5.0% - pH (5% solution): 5.0–7.0 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Functional beverages - Solubility: Soluble in water; the solution is clear to slightly hazy at typical use levels. #### Undenatured Type II Collagen URL: https://nutrition.rainwoodbio.com/products/protein-collagen/undenatured-type-ii-collagen/ Chemical form: Chicken sternum undenatured type II collagen 10% Formula: Native type II collagen (protein complex) CAS: 9007-34-5 Summary: Chicken sternum undenatured type II collagen standardized to 10–20% native type II collagen by ELISA, for capsules where the native structure and the assay method are the specification. Specification: - Type II collagen (ELISA): 10.0–20.0% - Protein (Kjeldahl N×6.25): ≥50.0% - Appearance: Off-white to light tan powder - Identification: ELISA with a type II specific antibody - Loss on drying: ≤8.0% - Ash: ≤10.0% - pH (5% suspension): 5.0–7.0 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Dispersible in water; not a clear solution. The native structure is the functional specification. #### Whey Protein Concentrate URL: https://nutrition.rainwoodbio.com/products/protein-collagen/whey-protein-concentrate/ Chemical form: Whey protein concentrate 80%, spray-dried Formula: Whey protein (mixture) CAS: — Summary: Whey protein concentrate 80 specified at ≥80% protein on a dry basis, with moisture, ash, fat and lactose limits, for powders and bars where the protein source and the carbohydrate load have to be declared. Specification: - Protein (Kjeldahl N×6.38): ≥80.0% (dry basis) - Moisture: ≤5.0% - Ash: ≤4.0% - Fat: ≤6.0% - Lactose: ≤5.0% - Appearance: White to light cream powder - pH (5% solution): 6.5–7.5 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤10,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Sports powders, Powder sticks and drink mixes, Protein bars, Functional beverages - Solubility: Dispersible in water; the solution is opaque and foams on mixing. #### Casein URL: https://nutrition.rainwoodbio.com/products/protein-collagen/casein/ Chemical form: Micellar casein, spray-dried Formula: Casein (milk protein) CAS: 9000-71-9 Summary: Micellar casein specified at ≥90% protein on a dry basis, with moisture, ash, fat and lactose limits, for powders and bars where the slow-digesting protein and the mineral load have to be declared. Specification: - Protein (Kjeldahl N×6.38): ≥90.0% (dry basis) - Moisture: ≤10.0% - Ash: ≤2.0% - Fat: ≤1.5% - Lactose: ≤1.0% - Appearance: White to off-white powder - pH (5% suspension): 6.5–7.5 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤10,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Sports powders, Powder sticks and drink mixes, Protein bars - Solubility: Dispersible in water; micellar casein swells and is not a clear solution. #### Lactoferrin URL: https://nutrition.rainwoodbio.com/products/protein-collagen/lactoferrin/ Chemical form: Bovine lactoferrin, spray-dried Formula: Bovine lactoferrin (iron-binding glycoprotein) CAS: 112163-33-4 Summary: Bovine lactoferrin specified at ≥95% protein and 9–20% iron saturation, for capsules and powder blends where the protein, the iron saturation and the milk source have to be declared. Specification: - Protein: ≥95.0% - Iron saturation: 9.0–20.0% - Appearance: Pinkish-white to light tan powder - Identification: HPLC and ELISA conform - Moisture: ≤5.0% - Ash: ≤1.5% - pH (5% solution): 5.5–7.0 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Soluble in water; the solution is clear to slightly hazy and pale pink. #### Soy Protein Isolate URL: https://nutrition.rainwoodbio.com/products/protein-collagen/soy-protein-isolate/ Chemical form: Soy protein isolate, spray-dried Formula: Soy protein isolate CAS: 9010-10-0 Summary: Soy protein isolate specified at ≥90% protein on a dry basis, for powders and bars where the protein source, the allergen and the protein factor have to be declared. Specification: - Protein (Kjeldahl N×6.25): ≥90.0% (dry basis) - Appearance: Off-white to light cream powder - Moisture: ≤7.0% - Ash: ≤5.0% - Fat: ≤1.0% - pH (5% suspension): 6.5–7.5 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤10,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Sports powders, Powder sticks and drink mixes, Protein bars - Solubility: Dispersible in water; the solution is opaque and does not form a clear solution. #### Pea Protein Isolate URL: https://nutrition.rainwoodbio.com/products/protein-collagen/pea-protein-isolate/ Chemical form: Pea protein isolate, spray-dried Formula: Pea protein isolate CAS: 90082-22-5 Summary: Pea protein isolate specified at ≥80% protein on a dry basis, for plant-based powders and bars where the protein source, the allergen and the protein factor have to be declared. Specification: - Protein (Kjeldahl N×6.25): ≥80.0% (dry basis) - Appearance: Light yellow to cream powder - Moisture: ≤8.0% - Ash: ≤5.0% - Fat: ≤2.0% - pH (5% suspension): 6.0–8.0 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤10,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Sports powders, Powder sticks and drink mixes, Protein bars - Solubility: Dispersible in water; the solution is opaque and does not form a clear solution. #### Sea Cucumber Peptides URL: https://nutrition.rainwoodbio.com/products/protein-collagen/sea-cucumber-peptides/ Chemical form: Sea cucumber peptide powder Formula: — CAS: — Summary: Sea cucumber peptides specified at ≥90% protein with a peptide fraction ≥80% below 3,000 Da; the source, the molecular weight distribution and the protein method are the specification. Specification: - Protein (Kjeldahl): ≥90.0% - Peptide content: ≥80.0% (HPLC) - Molecular weight: ≥80% below 3,000 Da - Ash: ≤5.0% - Appearance: Off-white to light tan, free-flowing powder - Identification: Protein and peptide profile conform - Moisture: ≤7.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Soluble in water; the solution is clear to slightly opalescent. #### Phycocyanin URL: https://nutrition.rainwoodbio.com/products/protein-collagen/phycocyanin/ Chemical form: Phycocyanin, blue powder Formula: — CAS: 11016-15-2 Summary: Phycocyanin specified at ≥25% by UV/Vis with ≥50% protein; the pigment figure, the protein figure and the source are the specification. Specification: - Phycocyanin (UV/Vis): ≥25.0% - Protein: ≥50.0% - Ash: ≤8.0% - Appearance: Blue, free-flowing powder - Identification: UV/Vis spectrum conform - Moisture: ≤7.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Soluble in water; the solution is deep blue. #### Bitter Melon Peptides URL: https://nutrition.rainwoodbio.com/products/protein-collagen/bitter-melon-peptides/ Chemical form: Bitter melon peptide powder Formula: — CAS: — Summary: Bitter melon peptides specified at ≥80% protein with a peptide fraction ≥70%; the source, the peptide content and the protein method are the specification. Specification: - Protein (Kjeldahl): ≥80.0% - Peptide content: ≥70.0% (HPLC) - Ash: ≤8.0% - Appearance: Off-white to light yellow, free-flowing powder - Identification: Protein and peptide profile conform - Moisture: ≤7.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Soluble in water; the solution is clear to slightly turbid. #### Casein Phosphopeptides URL: https://nutrition.rainwoodbio.com/products/protein-collagen/casein-phosphopeptides/ Chemical form: Casein phosphopeptide powder Formula: — CAS: — Summary: Casein phosphopeptides specified at ≥80% protein with ≥70% peptide and 2.0–4.0% calcium; the phosphorylation, the calcium figure and the peptide profile are the specification. Specification: - Protein (Kjeldahl): ≥80.0% - Peptide content: ≥70.0% (HPLC) - Calcium: 2.0–4.0% - Ash: ≤10.0% - Appearance: White to off-white, free-flowing powder - Identification: Protein and peptide profile conform - Moisture: ≤5.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Soluble in water; the solution is clear to slightly turbid. #### Oyster Protein Peptides URL: https://nutrition.rainwoodbio.com/products/protein-collagen/oyster-protein-peptides/ Chemical form: Oyster peptide powder Formula: — CAS: — Summary: Oyster protein peptides specified at ≥80% protein with a peptide fraction ≥70%; the source, the peptide content and the protein method are the specification. Specification: - Protein (Kjeldahl): ≥80.0% - Peptide content: ≥70.0% (HPLC) - Ash: ≤10.0% - Appearance: Off-white to light tan, free-flowing powder - Identification: Protein and peptide profile conform - Moisture: ≤7.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Soluble in water; the solution is clear to slightly turbid. #### Colostrum URL: https://nutrition.rainwoodbio.com/products/protein-collagen/colostrum/ Chemical form: Bovine colostrum powder Formula: — CAS: — Summary: Bovine colostrum specified at ≥70% protein with ≥20% IgG; the IgG figure, the protein method and the source are the specification. Specification: - Protein (Kjeldahl): ≥70.0% - IgG: ≥20.0% (immunodiffusion) - Fat: ≤5.0% - Lactose: ≤5.0% - Appearance: Cream to light tan, free-flowing powder - Identification: Protein and peptide profile conform - Moisture: ≤7.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Soluble in water; the solution is slightly turbid. #### Colostrum Basic Protein URL: https://nutrition.rainwoodbio.com/products/protein-collagen/colostrum-basic-protein/ Chemical form: Colostrum basic protein powder Formula: — CAS: — Summary: Colostrum basic protein specified at ≥80% protein with ≥10% IgG; the basic-protein fraction, the IgG figure and the source are the specification. Specification: - Protein (Kjeldahl): ≥80.0% - IgG: ≥10.0% (immunodiffusion) - Ash: ≤5.0% - Appearance: Cream to light tan, free-flowing powder - Identification: Protein and peptide profile conform - Moisture: ≤7.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Soluble in water; the solution is slightly turbid. #### Corn Protein Peptides URL: https://nutrition.rainwoodbio.com/products/protein-collagen/corn-protein-peptides/ Chemical form: Corn peptide powder Formula: — CAS: — Summary: Corn protein peptides specified at ≥80% protein with a peptide fraction ≥70%; the source, the peptide content and the protein method are the specification. Specification: - Protein (Kjeldahl): ≥80.0% - Peptide content: ≥70.0% (HPLC) - Ash: ≤5.0% - Appearance: Off-white to light yellow, free-flowing powder - Identification: Protein and peptide profile conform - Moisture: ≤7.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Soluble in water; the solution is clear to slightly turbid. #### Soy Protein Peptides URL: https://nutrition.rainwoodbio.com/products/protein-collagen/soy-protein-peptides/ Chemical form: Soy peptide powder Formula: — CAS: — Summary: Soy protein peptides specified at ≥90% protein with a peptide fraction ≥80%; the source, the peptide content and the protein method are the specification. Specification: - Protein (Kjeldahl): ≥90.0% - Peptide content: ≥80.0% (HPLC) - Ash: ≤5.0% - Appearance: Off-white to light tan powder - Identification: Protein and peptide profile conform - Moisture: ≤7.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Soluble in water; the solution is clear to slightly turbid. #### Wheat Protein Peptides URL: https://nutrition.rainwoodbio.com/products/protein-collagen/wheat-protein-peptides/ Chemical form: Wheat peptide powder Formula: — CAS: — Summary: Wheat protein peptides specified at ≥80% protein with a peptide fraction ≥70%; the source, the peptide content and the gluten statement are the specification. Specification: - Protein (Kjeldahl): ≥80.0% - Peptide content: ≥70.0% (HPLC) - Ash: ≤5.0% - Appearance: Off-white to light tan powder - Identification: Protein and peptide profile conform - Moisture: ≤7.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Soluble in water; the solution is clear to slightly turbid. #### Donkey-Hide Gelatin Peptides URL: https://nutrition.rainwoodbio.com/products/protein-collagen/donkey-hide-gelatin-peptides/ Chemical form: Donkey-hide gelatin peptide powder Formula: — CAS: — Summary: Donkey-hide gelatin peptides specified at ≥90% protein with a peptide fraction ≥80%; the source, the peptide content and the gelatin identity are the specification. Specification: - Protein (Kjeldahl): ≥90.0% - Peptide content: ≥80.0% (HPLC) - Ash: ≤3.0% - Appearance: Off-white to light tan powder - Identification: Protein and peptide profile conform - Moisture: ≤7.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Soluble in water; the solution is clear to slightly turbid. #### Peanut Protein Peptides URL: https://nutrition.rainwoodbio.com/products/protein-collagen/peanut-protein-peptides/ Chemical form: Peanut peptide powder Formula: — CAS: — Summary: Peanut protein peptides specified at ≥80% protein with a peptide fraction ≥70%; the source, the peptide content and the peanut allergen statement are the specification. Specification: - Protein (Kjeldahl): ≥80.0% - Peptide content: ≥70.0% (HPLC) - Ash: ≤5.0% - Appearance: Off-white to light tan powder - Identification: Protein and peptide profile conform - Moisture: ≤7.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Soluble in water; the solution is clear to slightly turbid. #### Walnut Protein Peptides URL: https://nutrition.rainwoodbio.com/products/protein-collagen/walnut-protein-peptides/ Chemical form: Walnut peptide powder Formula: — CAS: — Summary: Walnut protein peptides specified at ≥80% protein with a peptide fraction ≥70%; the source, the peptide content and the tree-nut allergen statement are the specification. Specification: - Protein (Kjeldahl): ≥80.0% - Peptide content: ≥70.0% (HPLC) - Ash: ≤5.0% - Appearance: Off-white to light tan powder - Identification: Protein and peptide profile conform - Moisture: ≤7.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Soluble in water; the solution is clear to slightly turbid. #### Elastin Peptides URL: https://nutrition.rainwoodbio.com/products/protein-collagen/elastin-peptides/ Chemical form: Elastin peptide powder Formula: — CAS: — Summary: Elastin peptides specified at ≥90% protein with a peptide fraction ≥80%; the source, the peptide content and the desmosine marker are the specification. Specification: - Protein (Kjeldahl): ≥90.0% - Peptide content: ≥80.0% (HPLC) - Ash: ≤5.0% - Appearance: Off-white to light tan powder - Identification: Protein and peptide profile conform - Moisture: ≤7.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Soluble in water; the solution is clear to slightly turbid. #### Fish Protein Peptides URL: https://nutrition.rainwoodbio.com/products/protein-collagen/fish-protein-peptides/ Chemical form: Fish peptide powder Formula: — CAS: — Summary: Fish protein peptides specified at ≥80% protein with a peptide fraction ≥70%; the source, the peptide content and the fish allergen statement are the specification. Specification: - Protein (Kjeldahl): ≥80.0% - Peptide content: ≥70.0% (HPLC) - Ash: ≤10.0% - Appearance: Off-white to light tan powder - Identification: Protein and peptide profile conform - Moisture: ≤7.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Soluble in water; the solution is clear to slightly turbid. #### Pea Protein Peptides URL: https://nutrition.rainwoodbio.com/products/protein-collagen/pea-protein-peptides/ Chemical form: Pea peptide powder Formula: — CAS: — Summary: Pea protein peptides specified at ≥80% protein with a peptide fraction ≥70%; the source, the peptide content and the protein method are the specification. Specification: - Protein (Kjeldahl): ≥80.0% - Peptide content: ≥70.0% (HPLC) - Ash: ≤5.0% - Appearance: Off-white to light tan powder - Identification: Protein and peptide profile conform - Moisture: ≤7.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Soluble in water; the solution is clear to slightly turbid. #### Rice Protein URL: https://nutrition.rainwoodbio.com/products/protein-collagen/rice-protein/ Chemical form: Rice protein powder Formula: — CAS: — Summary: Rice protein specified at ≥80% protein by Kjeldahl, with moisture and ash limits; the source, the protein method and the amino acid profile are the specification. Specification: - Protein (Kjeldahl): ≥80.0% - Appearance: Off-white to light tan powder - Identification: Protein profile conform - Moisture: ≤7.0% - Ash: ≤3.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Dispersible in water; the powder forms a suspension. #### Chicken Collagen Peptides URL: https://nutrition.rainwoodbio.com/products/protein-collagen/chicken-collagen-peptides/ Chemical form: Hydrolysed chicken collagen, type I Formula: — CAS: 9007-34-5 Summary: Chicken collagen peptides specified at ≥90% protein with a peptide fraction ≥80% below 3,000 Da; the chicken source and the peptide distribution are the specification. Specification: - Protein (Kjeldahl, N×5.55): ≥90.0% - Peptide content: ≥80.0% (SEC-HPLC) - Molecular weight: ≥80% below 3,000 Da - Appearance: Off-white to pale yellow powder - Loss on drying: ≤7.0% - Ash: ≤5.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Soluble in water; the solution is clear to slightly opalescent. #### Porcine Collagen Peptides URL: https://nutrition.rainwoodbio.com/products/protein-collagen/porcine-collagen-peptides/ Chemical form: Hydrolysed porcine collagen, type I Formula: — CAS: 9007-34-5 Summary: Porcine collagen peptides specified at ≥90% protein with a peptide fraction ≥80% below 3,000 Da; the porcine source and the peptide distribution are the specification. Specification: - Protein (Kjeldahl, N×5.55): ≥90.0% - Peptide content: ≥80.0% (SEC-HPLC) - Molecular weight: ≥80% below 3,000 Da - Appearance: Off-white to pale yellow powder - Loss on drying: ≤7.0% - Ash: ≤5.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Soluble in water; the solution is clear to slightly opalescent. #### Eggshell Membrane Collagen URL: https://nutrition.rainwoodbio.com/products/protein-collagen/eggshell-membrane-collagen/ Chemical form: Hydrolysed eggshell membrane collagen Formula: — CAS: 9007-34-5 Summary: Eggshell membrane collagen specified at ≥90% protein with a peptide fraction ≥80% below 3,000 Da; the eggshell membrane source and the peptide distribution are the specification. Specification: - Protein (Kjeldahl, N×5.55): ≥90.0% - Peptide content: ≥80.0% (SEC-HPLC) - Molecular weight: ≥80% below 3,000 Da - Appearance: Off-white to pale yellow powder - Loss on drying: ≤7.0% - Ash: ≤5.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Soluble in water; the solution is clear to slightly opalescent. #### Whey Protein Isolate URL: https://nutrition.rainwoodbio.com/products/protein-collagen/whey-protein-isolate/ Chemical form: Whey protein isolate, powder Formula: — CAS: 84082-51-9 Summary: Whey protein isolate specified at ≥90.0% protein on a dry basis with low fat and lactose; the isolate and the concentrate are different products with different protein, fat and lactose. Specification: - Protein (Kjeldahl, N×6.38, dry basis): ≥90.0% - Fat: ≤1.0% - Lactose: ≤1.0% - Ash: ≤3.0% - Appearance: Off-white to cream powder - Identification: Protein profile conform - Moisture: ≤5.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Powder sticks and drink mixes, Capsules and tablets, Protein bars - Solubility: Dispersible in water; the solution is slightly opalescent. #### Whey Protein Hydrolysate URL: https://nutrition.rainwoodbio.com/products/protein-collagen/whey-protein-hydrolysate/ Chemical form: Whey protein hydrolysate, powder Formula: — CAS: 84082-51-9 Summary: Whey protein hydrolysate specified at ≥80.0% protein on a dry basis with a stated degree of hydrolysis; the hydrolysate and the isolate are different products with different peptide size and taste. Specification: - Protein (Kjeldahl, N×6.38, dry basis): ≥80.0% - Degree of hydrolysis: 15.0–25.0% - Fat: ≤2.0% - Lactose: ≤2.0% - Appearance: Off-white to cream powder - Identification: Protein profile conform - Moisture: ≤5.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Powder sticks and drink mixes, Capsules and tablets - Solubility: Freely dispersible in water; the solution is clear to slightly opalescent. #### Micellar Casein URL: https://nutrition.rainwoodbio.com/products/protein-collagen/micellar-casein/ Chemical form: Micellar casein, powder Formula: — CAS: 9000-71-9 Summary: Micellar casein specified at ≥80.0% protein on a dry basis with low fat and lactose; the micellar form and the caseinate salts are different products with different solubility and processing. Specification: - Protein (Kjeldahl, N×6.38, dry basis): ≥80.0% - Fat: ≤2.0% - Lactose: ≤1.0% - Ash: ≤7.0% - Appearance: Off-white to cream powder - Identification: Protein profile conform - Moisture: ≤6.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Powder sticks and drink mixes, Protein bars, Capsules and tablets - Solubility: Dispersible in water; the dispersion is opaque and micellar. #### Sodium Caseinate URL: https://nutrition.rainwoodbio.com/products/protein-collagen/sodium-caseinate/ Chemical form: Sodium caseinate, powder Formula: — CAS: 9005-46-3 Summary: Sodium caseinate specified at ≥90.0% protein on a dry basis with 1.0–1.5% sodium; the sodium salt and calcium caseinate are different products with different solubility and mineral load. Specification: - Protein (Kjeldahl, N×6.38, dry basis): ≥90.0% - Sodium: 1.0–1.5% - Fat: ≤1.5% - Ash: ≤4.0% - Appearance: Off-white to cream powder - Identification: Protein profile conform - Moisture: ≤6.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Powder sticks and drink mixes, Protein bars, Capsules and tablets - Solubility: Freely soluble in water; the solution is slightly turbid. #### Calcium Caseinate URL: https://nutrition.rainwoodbio.com/products/protein-collagen/calcium-caseinate/ Chemical form: Calcium caseinate, powder Formula: — CAS: 9005-43-0 Summary: Calcium caseinate specified at ≥90.0% protein on a dry basis with 1.0–1.5% calcium; the calcium salt and sodium caseinate are different products with different solubility and mineral load. Specification: - Protein (Kjeldahl, N×6.38, dry basis): ≥90.0% - Calcium: 1.0–1.5% - Fat: ≤1.5% - Ash: ≤4.0% - Appearance: Off-white to cream powder - Identification: Protein profile conform - Moisture: ≤6.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Powder sticks and drink mixes, Protein bars, Capsules and tablets - Solubility: Dispersible in water; the dispersion is opaque and slightly viscous. #### Rice Protein Peptides URL: https://nutrition.rainwoodbio.com/products/protein-collagen/rice-protein-peptides/ Chemical form: Rice protein peptides, powder Formula: — CAS: — Summary: Rice protein peptides specified at ≥80.0% protein with a peptide fraction ≥70%; the peptides and the rice protein isolate are different products with different peptide size and dispersion. Specification: - Protein (Kjeldahl, N×5.95, dry basis): ≥80.0% - Peptide content: ≥70.0% (SEC-HPLC) - Ash: ≤3.0% - Appearance: Off-white to cream powder - Identification: Protein profile conform - Moisture: ≤7.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Powder sticks and drink mixes, Capsules and tablets - Solubility: Dispersible in water; the solution is slightly turbid. #### Wheat Gluten URL: https://nutrition.rainwoodbio.com/products/protein-collagen/wheat-gluten/ Chemical form: Wheat gluten, powder Formula: — CAS: 8002-80-0 Summary: Wheat gluten specified at ≥75.0% protein on a dry basis with a stated gluten content; the gluten and the wheat protein peptides are different products with different peptide size and allergen position. Specification: - Protein (Kjeldahl, N×5.7, dry basis): ≥75.0% - Gluten content: ≥75.0% - Ash: ≤1.0% - Appearance: Off-white to cream powder - Identification: Protein profile conform - Moisture: ≤8.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Protein bars, Powder blends, Bakery - Solubility: Dispersible in water; the dispersion is opaque and elastic. #### Corn Zein URL: https://nutrition.rainwoodbio.com/products/protein-collagen/corn-zein/ Chemical form: Corn zein, powder Formula: — CAS: 9010-66-6 Summary: Corn zein specified at ≥90.0% protein on a dry basis with low fat; the zein and the corn protein peptides are different products with different solubility and film-forming behaviour. Specification: - Protein (Kjeldahl, N×6.25, dry basis): ≥90.0% - Fat: ≤2.0% - Ash: ≤1.0% - Appearance: Off-white to cream powder - Identification: Protein profile conform - Moisture: ≤8.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Coatings and films, Capsules and tablets, Powder blends - Solubility: Insoluble in water; soluble in aqueous alcohol. #### Oat Protein URL: https://nutrition.rainwoodbio.com/products/protein-collagen/oat-protein/ Chemical form: Oat protein, powder Formula: — CAS: — Summary: Oat protein specified at ≥70.0% protein on a dry basis with a defined fibre and fat limit; the oat source and the protein factor are the specification. Specification: - Protein (Kjeldahl, N×5.83, dry basis): ≥70.0% - Fat: ≤8.0% - Fibre: ≤5.0% - Ash: ≤3.0% - Appearance: Off-white to light tan powder - Identification: Protein profile conform - Moisture: ≤7.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Powder sticks and drink mixes, Protein bars, Capsules and tablets - Solubility: Dispersible in water; the dispersion is opaque. #### Hemp Protein URL: https://nutrition.rainwoodbio.com/products/protein-collagen/hemp-protein/ Chemical form: Hemp protein, powder Formula: — CAS: — Summary: Hemp protein specified at ≥50.0% protein on a dry basis with a defined fat and fibre limit; the hemp source and the protein factor are the specification. Specification: - Protein (Kjeldahl, N×5.7, dry basis): ≥50.0% - Fat: ≤10.0% - Fibre: ≤10.0% - Ash: ≤6.0% - Appearance: Off-white to light tan powder - Identification: Protein profile conform - Moisture: ≤7.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Powder sticks and drink mixes, Protein bars - Solubility: Dispersible in water; the dispersion is opaque and slightly grainy. #### Egg White Protein URL: https://nutrition.rainwoodbio.com/products/protein-collagen/egg-white-protein/ Chemical form: Egg white protein, powder Formula: — CAS: — Summary: Egg white protein specified at ≥80.0% protein on a dry basis with low fat; the egg source and the protein factor are the specification. Specification: - Protein (Kjeldahl, N×6.25, dry basis): ≥80.0% - Fat: ≤1.0% - Ash: ≤5.0% - Appearance: Off-white to light tan powder - Identification: Protein profile conform - Moisture: ≤8.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Powder sticks and drink mixes, Protein bars, Capsules and tablets - Solubility: Dispersible in water; the dispersion is clear to slightly opalescent. #### Milk Protein Concentrate URL: https://nutrition.rainwoodbio.com/products/protein-collagen/milk-protein-concentrate/ Chemical form: Milk protein concentrate, powder Formula: — CAS: — Summary: Milk protein concentrate specified at ≥80.0% protein on a dry basis with defined fat and lactose limits; the milk source and the protein factor are the specification. Specification: - Protein (Kjeldahl, N×6.38, dry basis): ≥80.0% - Fat: ≤2.0% - Lactose: ≤5.0% - Ash: ≤7.0% - Appearance: Off-white to light tan powder - Identification: Protein profile conform - Moisture: ≤6.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Powder sticks and drink mixes, Protein bars, Capsules and tablets - Solubility: Dispersible in water; the dispersion is opaque. #### Marine Collagen URL: https://nutrition.rainwoodbio.com/products/protein-collagen/marine-collagen/ Chemical form: Hydrolysed marine collagen, type I Formula: — CAS: 9007-34-5 Summary: Marine collagen specified at ≥90.0% protein with a peptide fraction ≥80% below 3,000 Da; the fish skin source and the peptide distribution are the specification. Specification: - Protein (Kjeldahl, N×5.55): ≥90.0% - Peptide content: ≥80.0% (SEC-HPLC) - Molecular weight: ≥80% below 3,000 Da - Appearance: Off-white to pale yellow powder - Loss on drying: ≤7.0% - Ash: ≤5.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Soluble in water; the solution is clear to slightly opalescent. #### Collagen Tripeptide URL: https://nutrition.rainwoodbio.com/products/protein-collagen/collagen-tripeptide/ Chemical form: Collagen tripeptide, powder Formula: — CAS: 9007-34-5 Summary: Collagen tripeptide specified at ≥90.0% protein with ≥30.0% tripeptide content; the tripeptide fraction and the source are the specification. Specification: - Protein (Kjeldahl, N×5.55): ≥90.0% - Tripeptide content: ≥30.0% (HPLC) - Peptide content: ≥80.0% (SEC-HPLC) - Appearance: Off-white to pale yellow powder - Loss on drying: ≤7.0% - Ash: ≤5.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Soluble in water; the solution is clear to slightly opalescent. ### Fatty Acids & Lipids A lipid ingredient has two specifications: the fatty acid profile and the oxidation state. An omega-3 powder can meet its EPA and DHA figures and still be rancid, and a phospholipid can meet its assay and still be the wrong phospholipid profile. This range is being specified around the profile, the peroxide and anisidine values, and the carrier system that makes the powder flow. #### Phosphatidylserine URL: https://nutrition.rainwoodbio.com/products/fatty-acids/phosphatidylserine/ Chemical form: Soy-derived phosphatidylserine 50% powder Formula: C₄₂H₈₂NO₁₀P CAS: 51446-62-9 Summary: Soy-derived phosphatidylserine specified at 50.0–55.0% by HPLC-ELSD, with peroxide value and acid value on the specification, for capsules and powder blends where the phospholipid profile matters. Specification: - Phosphatidylserine: 50.0–55.0% (HPLC-ELSD) - Appearance: Light yellow to yellow powder - Identification: HPLC-ELSD profile conforms - Loss on drying: ≤5.0% - Peroxide value: ≤10 meq/kg - Acid value: Reported - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - Source: Soybean lecithin - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Gummies and chews - Solubility: Dispersible in water; not a clear solution. Soluble in chloroform and other non-polar solvents. #### Algal DHA Powder URL: https://nutrition.rainwoodbio.com/products/fatty-acids/algal-dha-powder/ Chemical form: Microencapsulated algal DHA powder 10% Formula: DHA (C₂₂H₃₂O₂) in microencapsulated algal oil CAS: 6217-54-5 Summary: Microencapsulated algal DHA powder standardized to ≥10% DHA by GC, for capsules, sticks and beverages where the algal source, the oil load and the oxidation values have to be declared. Specification: - DHA (GC): ≥10.0% - Appearance: Off-white to light yellow powder - Moisture: ≤5.0% - Peroxide value: ≤5.0 meq/kg - p-Anisidine value: ≤20.0 - Carrier: Modified starch, declared - Particle size: ≥95% through 40 mesh - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Functional beverages, Gummies and chews - Solubility: Dispersible in water; the oil is encapsulated in a starch matrix, not dissolved. #### Fish Oil Powder URL: https://nutrition.rainwoodbio.com/products/fatty-acids/fish-oil-powder/ Chemical form: Microencapsulated fish oil powder 10% Formula: EPA and DHA triglycerides in microencapsulated fish oil CAS: 8002-50-4 Summary: Microencapsulated fish oil powder standardized to ≥10% EPA+DHA by GC, for capsules, sticks and beverages where the fish source, the omega-3 content and the oxidation values have to be declared. Specification: - EPA + DHA (GC): ≥10.0% - EPA (GC): Reported - DHA (GC): Reported - Appearance: White to light yellow powder - Moisture: ≤5.0% - Peroxide value: ≤5.0 meq/kg - p-Anisidine value: ≤20.0 - Carrier: Modified starch and antioxidant, declared - Particle size: ≥95% through 40 mesh - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Functional beverages - Solubility: Dispersible in water; the oil is encapsulated in a starch matrix, not dissolved. #### EPA Powder URL: https://nutrition.rainwoodbio.com/products/fatty-acids/epa-powder/ Chemical form: Microencapsulated EPA powder 10% Formula: EPA (C₂₀H₃₀O₂) in microencapsulated oil CAS: 10417-94-4 Summary: Microencapsulated EPA powder standardized to ≥10% EPA by GC, for capsules and sticks where the EPA content, the oil load and the oxidation values have to be declared. Specification: - EPA (GC): ≥10.0% - Appearance: White to light yellow powder - Moisture: ≤5.0% - Peroxide value: ≤5.0 meq/kg - p-Anisidine value: ≤20.0 - Carrier: Modified starch and antioxidant, declared - Particle size: ≥95% through 40 mesh - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Functional beverages - Solubility: Dispersible in water; the oil is encapsulated in a starch matrix, not dissolved. #### DHA Powder URL: https://nutrition.rainwoodbio.com/products/fatty-acids/dha-powder/ Chemical form: Microencapsulated DHA powder 10% Formula: DHA (C₂₂H₃₂O₂) in microencapsulated oil CAS: 6217-54-5 Summary: Microencapsulated DHA powder standardized to ≥10% DHA by GC, for capsules and sticks where the DHA content, the oil load and the oxidation values have to be declared. Specification: - DHA (GC): ≥10.0% - Appearance: White to light yellow powder - Moisture: ≤5.0% - Peroxide value: ≤5.0 meq/kg - p-Anisidine value: ≤20.0 - Carrier: Modified starch and antioxidant, declared - Particle size: ≥95% through 40 mesh - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Functional beverages - Solubility: Dispersible in water; the oil is encapsulated in a starch matrix, not dissolved. #### Evening Primrose Oil Powder URL: https://nutrition.rainwoodbio.com/products/fatty-acids/evening-primrose-oil-powder/ Chemical form: Microencapsulated evening primrose oil powder 40% Formula: Evening primrose oil (GLA C₁₈H₃₀O₂) in a starch matrix CAS: 90028-66-3 Summary: Microencapsulated evening primrose oil powder at 40% oil load, standardized to 8–11% GLA by GC, for capsules and sticks where the oil load and the GLA content have to be declared. Specification: - GLA (on oil): 8.0–11.0% (GC) - Oil load: 40.0% (declared) - Appearance: White to pale yellow powder - Moisture: ≤4.5% - Peroxide value: ≤8.0 meq/kg - p-Anisidine value: ≤20.0 - Carrier: Modified starch, declared - Particle size: ≥95% through 40 mesh - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Functional beverages - Solubility: Dispersible in water; the oil is encapsulated in a starch matrix, not dissolved. #### CLA Powder URL: https://nutrition.rainwoodbio.com/products/fatty-acids/cla-powder/ Chemical form: Microencapsulated CLA powder 10% Formula: Conjugated linoleic acid (C₁₈H₃₂O₂ isomer mixture) CAS: 2420-56-6 Summary: Microencapsulated CLA powder standardized to ≥10% conjugated linoleic acid by GC, for capsules and sticks where the isomer profile, the oil load and the oxidation values have to be declared. Specification: - CLA (GC): ≥10.0% - Appearance: White to light yellow powder - Moisture: ≤5.0% - Peroxide value: ≤5.0 meq/kg - p-Anisidine value: ≤20.0 - Carrier: Modified starch and antioxidant, declared - Particle size: ≥95% through 40 mesh - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Functional beverages - Solubility: Dispersible in water; the oil is encapsulated in a starch matrix, not dissolved. #### Flaxseed Oil Powder URL: https://nutrition.rainwoodbio.com/products/fatty-acids/flaxseed-oil-powder/ Chemical form: Microencapsulated flaxseed oil powder 50% Formula: Flaxseed oil (ALA C₁₈H₃₀O₂) in a starch matrix CAS: 8001-26-1 Summary: Microencapsulated flaxseed oil powder at 50% oil load, standardized to ≥22.5% alpha-linolenic acid by GC, for capsules, sticks and beverages where the ALA content has to be declared. Specification: - Alpha-linolenic acid (ALA, GC): ≥22.5% - Oil load: 50.0% (declared) - Appearance: White to light yellow powder - Moisture: ≤5.0% - Peroxide value: ≤5.0 meq/kg - p-Anisidine value: ≤20.0 - Carrier: Modified starch, declared - Particle size: ≥95% through 40 mesh - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Functional beverages - Solubility: Dispersible in water; the oil is encapsulated in a starch matrix, not dissolved. #### MCT Powder URL: https://nutrition.rainwoodbio.com/products/fatty-acids/mct-powder/ Chemical form: Microencapsulated MCT oil powder 50% Formula: Medium-chain triglycerides (C8/C10) in a starch matrix CAS: 73398-61-5 Summary: Microencapsulated MCT oil powder at 50% oil load, with a declared C8/C10 profile, for sports powders, sticks and beverages where the oil load and the fatty-acid profile have to be declared. Specification: - MCT oil: ≥50.0% - C8 (caprylic acid): 55.0–65.0% of oil (GC) - C10 (capric acid): 35.0–45.0% of oil (GC) - Appearance: White to light yellow powder - Moisture: ≤5.0% - Peroxide value: ≤1.0 meq/kg - Carrier: Modified starch, declared - Particle size: ≥95% through 40 mesh - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Sports powders, Powder sticks and drink mixes, Functional beverages - Solubility: Dispersible in water; the oil is encapsulated in a starch matrix, not dissolved. #### Coconut Oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/coconut-oil/ Chemical form: Refined coconut oil Formula: — CAS: 8001-31-8 Summary: Refined coconut oil specified by its lauric acid profile with free fatty acid, moisture and peroxide limits; the grade and the fatty acid profile are the specification. Specification: - Lauric acid (C12:0): 45.0–52.0% (GC) - Myristic acid (C14:0): 16.0–21.0% - Free fatty acid: ≤0.10% - Peroxide value: ≤5.0 meq O₂/kg - Appearance: Clear to slightly hazy oil - Identification: Fatty acid profile conform - Moisture: ≤0.1% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg HDPE bottle; 25 kg HDPE drum - Applications: Softgel capsules, Oil-based blends - Solubility: Insoluble in water; soluble in fats and in organic solvents. #### Phytosterols URL: https://nutrition.rainwoodbio.com/products/fatty-acids/phytosterols/ Chemical form: Phytosterol powder Formula: — CAS: 83-46-5 Summary: Phytosterols specified at ≥95% total sterols by GC with a defined sitosterol, campesterol and stigmasterol profile; the sterol profile is the specification. Specification: - Total sterols (GC): ≥95.0% - Beta-sitosterol: 40.0–60.0% - Campesterol: 20.0–30.0% - Stigmasterol: 15.0–25.0% - Appearance: White to off-white powder - Identification: Sterol profile conform - Loss on drying: ≤2.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Oil-based blends - Solubility: Insoluble in water; soluble in fats and in organic solvents. #### Pumpkin Seed Oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/pumpkin-seed-oil/ Chemical form: Cold-pressed pumpkin seed oil Formula: — CAS: 8016-49-9 Summary: Cold-pressed pumpkin seed oil specified by its linoleic and oleic profile with free fatty acid and peroxide limits; the grade and the fatty acid profile are the specification. Specification: - Linoleic acid (C18:2): 45.0–55.0% (GC) - Oleic acid (C18:1): 25.0–35.0% - Free fatty acid: ≤0.50% - Peroxide value: ≤5.0 meq O₂/kg - Appearance: Clear to slightly hazy oil - Identification: Fatty acid profile conform - Moisture: ≤0.1% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg amber bottle; 25 kg HDPE drum - Applications: Softgel capsules, Oil-based blends - Solubility: Insoluble in water; soluble in fats and in organic solvents. #### Sea Buckthorn Oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/sea-buckthorn-oil/ Chemical form: Sea buckthorn fruit oil Formula: — CAS: — Summary: Sea buckthorn fruit oil specified by its palmitoleic and oleic profile with free fatty acid and peroxide limits; the fruit oil and the seed oil are different specifications. Specification: - Palmitoleic acid (C16:1): 25.0–35.0% (GC) - Oleic acid (C18:1): 20.0–30.0% - Linoleic acid (C18:2): 30.0–40.0% - Free fatty acid: ≤1.00% - Peroxide value: ≤5.0 meq O₂/kg - Appearance: Clear to slightly hazy oil - Identification: Fatty acid profile conform - Moisture: ≤0.1% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg amber bottle; 25 kg HDPE drum - Applications: Softgel capsules, Oil-based blends - Solubility: Insoluble in water; soluble in fats and in organic solvents. #### Lecithin URL: https://nutrition.rainwoodbio.com/products/fatty-acids/lecithin/ Chemical form: Soy lecithin, powder or fluid Formula: — CAS: 8002-43-5 Summary: Soy lecithin specified at ≥60% phospholipids with acetone-insoluble matter, moisture and acid value limits; the source and the phospholipid profile are the specification. Specification: - Phospholipids: >=60.0% - Acetone-insoluble matter: >=60.0% - Moisture: ≤1.0% - Acid value: ≤30 mg KOH/g - Appearance: Yellow to light brown powder or fluid - Identification: Phospholipid profile conform - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Oil-based blends - Solubility: Dispersible in water; soluble in fats and in organic solvents. #### Nervonic Acid URL: https://nutrition.rainwoodbio.com/products/fatty-acids/nervonic-acid/ Chemical form: Nervonic acid, powder Formula: C₂₄H₄₆O₂ CAS: 506-37-6 Summary: Nervonic acid specified at ≥90% by GC with a defined C24:1 profile; the chain length, the cis configuration and the assay are the specification. Specification: - Assay (GC): ≥90.0% - C24:1 content: ≥90.0% - Appearance: White to off-white powder - Identification: GC profile conform - Melting point: 42–44 °C - Loss on drying: ≤1.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Oil-based blends - Solubility: Insoluble in water; soluble in fats and in organic solvents. #### Perilla Seed Oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/perilla-seed-oil/ Chemical form: Cold-pressed perilla seed oil Formula: — CAS: — Summary: Cold-pressed perilla seed oil specified by its alpha-linolenic acid profile with free fatty acid and peroxide limits; the grade and the fatty acid profile are the specification. Specification: - Alpha-linolenic acid (C18:3): 55.0–65.0% (GC) - Linoleic acid (C18:2): 12.0–20.0% - Oleic acid (C18:1): 12.0–20.0% - Free fatty acid: ≤0.50% - Peroxide value: ≤5.0 meq O₂/kg - Appearance: Clear to slightly hazy oil - Identification: Fatty acid profile conform - Moisture: ≤0.1% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg amber bottle; 25 kg HDPE drum - Applications: Softgel capsules, Oil-based blends - Solubility: Insoluble in water; soluble in fats and in organic solvents. #### Safflower Seed Oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/safflower-seed-oil/ Chemical form: Refined safflower seed oil Formula: — CAS: 8001-23-8 Summary: Refined safflower seed oil specified by its linoleic acid profile with free fatty acid, moisture and peroxide limits; the grade and the fatty acid profile are the specification. Specification: - Linoleic acid (C18:2): 70.0–80.0% (GC) - Oleic acid (C18:1): 10.0–20.0% - Free fatty acid: ≤0.50% - Peroxide value: ≤5.0 meq O₂/kg - Appearance: Clear to slightly hazy oil - Identification: Fatty acid profile conform - Moisture: ≤0.1% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg HDPE bottle; 25 kg HDPE drum - Applications: Softgel capsules, Oil-based blends - Solubility: Insoluble in water; soluble in fats and in organic solvents. #### Wheat Germ Oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/wheat-germ-oil/ Chemical form: Cold-pressed wheat germ oil Formula: — CAS: 8006-95-9 Summary: Cold-pressed wheat germ oil specified by its linoleic and palmitic profile with free fatty acid and peroxide limits; the grade and the fatty acid profile are the specification. Specification: - Linoleic acid (C18:2): 50.0–60.0% (GC) - Oleic acid (C18:1): 15.0–25.0% - Palmitic acid (C16:0): 15.0–20.0% - Free fatty acid: ≤0.50% - Peroxide value: ≤5.0 meq O₂/kg - Appearance: Clear to slightly hazy oil - Identification: Fatty acid profile conform - Moisture: ≤0.1% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg amber bottle; 25 kg HDPE drum - Applications: Softgel capsules, Oil-based blends - Solubility: Insoluble in water; soluble in fats and in organic solvents. #### Borage Oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/borage-oil/ Chemical form: Cold-pressed borage seed oil Formula: — CAS: 84012-16-8 Summary: Cold-pressed borage seed oil specified by its gamma-linolenic acid profile with free fatty acid and peroxide limits; the GLA figure and the oxidation state are the specification. Specification: - Gamma-linolenic acid (GLA): 18.0–25.0% (GC) - Linoleic acid (C18:2): 30.0–40.0% - Oleic acid (C18:1): 15.0–25.0% - Free fatty acid: ≤0.50% - Peroxide value: ≤5.0 meq O₂/kg - Appearance: Clear to slightly hazy oil - Identification: Fatty acid profile conform - Moisture: ≤0.1% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg amber bottle; 25 kg HDPE drum - Applications: Softgel capsules, Oil-based blends - Solubility: Insoluble in water; soluble in fats and in organic solvents. #### Phosphatidylcholine URL: https://nutrition.rainwoodbio.com/products/fatty-acids/phosphatidylcholine/ Chemical form: Phosphatidylcholine, waxy solid or powder Formula: — CAS: 97281-44-2 Summary: Phosphatidylcholine specified at ≥90% PC by HPLC with moisture, acid value and peroxide limits; the PC figure and the phospholipid profile are the specification. Specification: - Phosphatidylcholine (HPLC): ≥90.0% - Appearance: White to light yellow waxy solid or powder - Identification: Phospholipid profile conform - Moisture: ≤1.0% - Acid value: ≤30 mg KOH/g - Peroxide value: ≤5.0 meq O₂/kg - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Oil-based blends - Solubility: Dispersible in water; soluble in fats and in organic solvents. #### Pomegranate Seed Oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/pomegranate-seed-oil/ Chemical form: Cold-pressed pomegranate seed oil Formula: — CAS: — Summary: Cold-pressed pomegranate seed oil specified by its punicic acid profile with free fatty acid and peroxide limits; the punicic acid figure and the oxidation state are the specification. Specification: - Punicic acid (C18:3): 60.0–80.0% (GC) - Linoleic acid (C18:2): 5.0–10.0% - Oleic acid (C18:1): 5.0–10.0% - Free fatty acid: ≤0.50% - Peroxide value: ≤5.0 meq O₂/kg - Appearance: Clear to slightly hazy oil - Identification: Fatty acid profile conform - Moisture: ≤0.1% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg amber bottle; 25 kg HDPE drum - Applications: Softgel capsules, Oil-based blends - Solubility: Insoluble in water; soluble in fats and in organic solvents. #### Black Seed Oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/black-seed-oil/ Chemical form: Cold-pressed black seed oil Formula: — CAS: — Summary: Cold-pressed black seed oil specified by its linoleic profile and thymoquinone figure with free fatty acid and peroxide limits; the thymoquinone figure and the oxidation state are the specification. Specification: - Linoleic acid (C18:2): 50.0–60.0% (GC) - Oleic acid (C18:1): 20.0–25.0% - Thymoquinone (HPLC): 0.5–2.0% - Free fatty acid: ≤0.50% - Peroxide value: ≤5.0 meq O₂/kg - Appearance: Clear to slightly hazy oil - Identification: Fatty acid profile conform - Moisture: ≤0.1% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg amber bottle; 25 kg HDPE drum - Applications: Softgel capsules, Oil-based blends - Solubility: Insoluble in water; soluble in fats and in organic solvents. #### Squalene URL: https://nutrition.rainwoodbio.com/products/fatty-acids/squalene/ Chemical form: Squalene, oil Formula: C₃₀H₅₀ CAS: 111-02-4 Summary: Squalene specified at ≥90% by GC with refractive index and iodine value windows; the source, the assay and the unsaturation figure are the specification. Specification: - Assay (GC): ≥90.0% - Appearance: Colourless to pale yellow oil - Identification: GC and refractive index conform - Refractive index: 1.494–1.499 - Iodine value: 350–380 g I₂/100 g - Moisture: ≤0.1% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg amber bottle; 25 kg HDPE drum - Applications: Softgel capsules, Oil-based blends - Solubility: Insoluble in water; soluble in fats and in organic solvents. #### Sunflower Lecithin URL: https://nutrition.rainwoodbio.com/products/fatty-acids/sunflower-lecithin/ Chemical form: Sunflower lecithin, powder or fluid Formula: — CAS: 8002-43-5 Summary: Sunflower lecithin specified at ≥60% phospholipids with acetone-insoluble matter, moisture and acid value limits; the sunflower source and the phospholipid profile are the specification. Specification: - Phospholipids: ≥60.0% - Acetone-insoluble matter: ≥60.0% - Moisture: ≤1.0% - Acid value: ≤30 mg KOH/g - Appearance: Yellow to light brown powder or fluid - Identification: Phospholipid profile conform - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Oil-based blends - Solubility: Dispersible in water; soluble in fats and in organic solvents. #### MCT Oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/mct-oil/ Chemical form: Medium-chain triglyceride oil Formula: — CAS: 73398-61-5 Summary: MCT oil specified by its C8/C10 profile with free fatty acid and peroxide limits; the oil and the spray-dried MCT powder are different products with different carriers and handling. Specification: - Caprylic acid (C8:0): 55.0–65.0% (GC) - Capric acid (C10:0): 35.0–45.0% - Free fatty acid: ≤0.10% - Peroxide value: ≤1.0 meq O₂/kg - Appearance: Clear to slightly hazy oil - Identification: Fatty acid profile conform - Moisture: ≤0.1% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg HDPE bottle; 25 kg HDPE drum - Applications: Softgel capsules, Oil-based blends, Powder on carrier on request - Solubility: Insoluble in water; soluble in fats and in organic solvents. #### Flaxseed Oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/flaxseed-oil/ Chemical form: Cold-pressed flaxseed oil Formula: — CAS: 8001-26-1 Summary: Cold-pressed flaxseed oil specified by its alpha-linolenic acid profile with free fatty acid and peroxide limits; the oil and the flaxseed oil powder are different products with different carriers and handling. Specification: - Alpha-linolenic acid (C18:3): 45.0–65.0% (GC) - Linoleic acid (C18:2): 12.0–20.0% - Oleic acid (C18:1): 12.0–20.0% - Free fatty acid: ≤0.50% - Peroxide value: ≤5.0 meq O₂/kg - Appearance: Clear to slightly hazy oil - Identification: Fatty acid profile conform - Moisture: ≤0.1% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg amber bottle; 25 kg HDPE drum - Applications: Softgel capsules, Oil-based blends - Solubility: Insoluble in water; soluble in fats and in organic solvents. #### Evening Primrose Oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/evening-primrose-oil/ Chemical form: Cold-pressed evening primrose oil Formula: — CAS: 90028-66-3 Summary: Cold-pressed evening primrose oil specified by its gamma-linolenic acid profile with free fatty acid and peroxide limits; the oil and the EPO powder are different products with different carriers and handling. Specification: - Gamma-linolenic acid (GLA): 8.0–11.0% (GC) - Linoleic acid (C18:2): 65.0–75.0% - Oleic acid (C18:1): 8.0–15.0% - Free fatty acid: ≤0.50% - Peroxide value: ≤5.0 meq O₂/kg - Appearance: Clear to slightly hazy oil - Identification: Fatty acid profile conform - Moisture: ≤0.1% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg amber bottle; 25 kg HDPE drum - Applications: Softgel capsules, Oil-based blends - Solubility: Insoluble in water; soluble in fats and in organic solvents. #### CLA Oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/cla-oil/ Chemical form: Conjugated linoleic acid oil Formula: — CAS: 2420-56-6 Summary: CLA oil specified by its conjugated linoleic acid content and isomer profile with free fatty acid and peroxide limits; the oil and the CLA powder are different products with different carriers and handling. Specification: - Conjugated linoleic acid (CLA): 70.0–80.0% (GC) - cis-9,trans-11 + trans-10,cis-12: ≥90.0% of CLA - Free fatty acid: ≤0.50% - Peroxide value: ≤5.0 meq O₂/kg - Appearance: Clear to slightly hazy oil - Identification: Fatty acid profile conform - Moisture: ≤0.1% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg amber bottle; 25 kg HDPE drum - Applications: Softgel capsules, Oil-based blends - Solubility: Insoluble in water; soluble in fats and in organic solvents. #### Fish Oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/fish-oil/ Chemical form: Refined fish oil, triglyceride Formula: — CAS: 8002-50-4 Summary: Refined fish oil specified by its EPA and DHA profile with free fatty acid, peroxide and anisidine limits; the oil and the fish oil powder are different products with different carriers and handling. Specification: - EPA (C20:5): 18.0–22.0% (GC) - DHA (C22:6): 12.0–16.0% - Free fatty acid: ≤0.50% - Peroxide value: ≤5.0 meq O₂/kg - Anisidine value: ≤20.0 - Appearance: Clear to slightly hazy oil - Identification: Fatty acid profile conform - Moisture: ≤0.1% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg amber bottle; 25 kg HDPE drum - Applications: Softgel capsules, Oil-based blends - Solubility: Insoluble in water; soluble in fats and in organic solvents. #### Algal DHA Oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/algal-dha-oil/ Chemical form: Algal DHA oil Formula: — CAS: 6217-54-5 Summary: Algal DHA oil specified by its DHA content with free fatty acid and peroxide limits; the oil and the algal DHA powder are different products with different carriers and handling. Specification: - DHA (C22:6): 35.0–45.0% (GC) - EPA (C20:5): ≤3.0% - Free fatty acid: ≤0.50% - Peroxide value: ≤5.0 meq O₂/kg - Appearance: Clear to slightly hazy oil - Identification: Fatty acid profile conform - Moisture: ≤0.1% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg amber bottle; 25 kg HDPE drum - Applications: Softgel capsules, Oil-based blends - Solubility: Insoluble in water; soluble in fats and in organic solvents. #### Squalane URL: https://nutrition.rainwoodbio.com/products/fatty-acids/squalane/ Chemical form: Squalane, oil Formula: C₃₀H₆₂ CAS: 111-01-3 Summary: Squalane specified at ≥95.0% by GC with refractive index and iodine value; the saturated squalane and unsaturated squalene are different products with different stability and labels. Specification: - Assay (GC): ≥95.0% - Appearance: Colourless to pale yellow oil - Identification: GC and refractive index conform - Refractive index: 1.450–1.455 - Iodine value: ≤1.0 g I₂/100 g - Moisture: ≤0.1% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg amber bottle; 25 kg HDPE drum - Applications: Softgel capsules, Oil-based blends, Topical-grade separation on request - Solubility: Insoluble in water; soluble in fats and in organic solvents. #### Phytosterol Esters URL: https://nutrition.rainwoodbio.com/products/fatty-acids/phytosterol-esters/ Chemical form: Phytosterol esters, paste or powder Formula: — CAS: 68441-68-9 Summary: Phytosterol esters specified at ≥90.0% ester content with a defined sterol profile; the esters and free phytosterols are different products with different solubility and label arithmetic. Specification: - Ester content (GC): ≥90.0% - Total sterols: ≥55.0% - Acid value: ≤1.0 mg KOH/g - Peroxide value: ≤5.0 meq O₂/kg - Appearance: White to off-white paste or powder - Identification: Sterol profile conform - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Softgel capsules, Oil-based blends, Fat-based spreads - Solubility: Insoluble in water; soluble in fats and in organic solvents. #### Black Currant Seed Oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/black-currant-seed-oil/ Chemical form: Cold-pressed black currant seed oil Formula: — CAS: 68606-81-5 Summary: Cold-pressed black currant seed oil specified by its GLA and ALA profile with free fatty acid and peroxide limits; the black currant source and the fatty acid profile are the specification. Specification: - Gamma-linolenic acid (GLA): 15.0–20.0% (GC) - Alpha-linolenic acid (ALA): 12.0–15.0% - Linoleic acid (C18:2): 40.0–50.0% - Free fatty acid: ≤0.50% - Peroxide value: ≤5.0 meq O₂/kg - Appearance: Clear to slightly hazy oil - Identification: Fatty acid profile conform - Moisture: ≤0.1% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg amber bottle; 25 kg HDPE drum - Applications: Softgel capsules, Oil-based blends - Solubility: Insoluble in water; soluble in fats and in organic solvents. #### Hemp Seed Oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/hemp-seed-oil/ Chemical form: Cold-pressed hemp seed oil Formula: — CAS: 89958-21-4 Summary: Cold-pressed hemp seed oil specified by its linoleic and ALA profile with free fatty acid and peroxide limits; the hemp source and the fatty acid profile are the specification. Specification: - Linoleic acid (C18:2): 50.0–60.0% (GC) - Alpha-linolenic acid (ALA): 15.0–25.0% - Oleic acid (C18:1): 10.0–20.0% - Free fatty acid: ≤0.50% - Peroxide value: ≤5.0 meq O₂/kg - Appearance: Clear to slightly hazy oil - Identification: Fatty acid profile conform - Moisture: ≤0.1% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg amber bottle; 25 kg HDPE drum - Applications: Softgel capsules, Oil-based blends - Solubility: Insoluble in water; soluble in fats and in organic solvents. #### Phosphatidylserine Sunflower URL: https://nutrition.rainwoodbio.com/products/fatty-acids/phosphatidylserine-sunflower/ Chemical form: Sunflower phosphatidylserine, powder Formula: — CAS: 1446756-47-3 Summary: Sunflower phosphatidylserine specified at ≥50.0% PS by HPLC with a phospholipid profile; the sunflower source and the PS figure are the specification. Specification: - Phosphatidylserine (HPLC): ≥50.0% - Phospholipids: ≥70.0% - Appearance: Light yellow to yellow powder - Identification: Phospholipid profile conform - Loss on drying: ≤5.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Dispersible in water; soluble in fats and in organic solvents. #### Omega-3 Concentrate URL: https://nutrition.rainwoodbio.com/products/fatty-acids/omega-3-concentrate/ Chemical form: Omega-3 concentrate, ethyl ester or triglyceride Formula: — CAS: — Summary: Omega-3 concentrate specified at ≥60.0% EPA+DHA by GC with a defined EPA/DHA ratio; the concentrate, the form (EE/TG) and the ratio are the specification. Specification: - EPA + DHA: ≥60.0% (GC) - EPA: 30.0–36.0% - DHA: 20.0–26.0% - Free fatty acid: ≤0.10% - Peroxide value: ≤5.0 meq O₂/kg - Anisidine value: ≤20.0 - Appearance: Clear, pale yellow oil - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg amber bottle; 25 kg HDPE drum - Applications: Softgel capsules, Oil-based blends - Solubility: Insoluble in water; soluble in fats and in organic solvents. ### Specialty Nutrients Specialty ingredients carry the highest price per kilogram and the thinnest public specification. This range is being built around identity testing, stability data and a document pack that lets a buyer qualify a lot without a second laboratory. A product page is published only when the form, the assay method and the regulatory status in the destination market are all documented. #### Creatine Monohydrate URL: https://nutrition.rainwoodbio.com/products/specialty/creatine-monohydrate/ Chemical form: Creatine monohydrate, crystalline Formula: C₄H₉N₃O₂·H₂O CAS: 6020-87-7 Summary: Creatine monohydrate specified at 99.0–101.0% by HPLC, with creatinine and dicyandiamide limits, for sports powders, capsules and tablets where the impurity profile decides the grade. Specification: - Assay: 99.0–101.0% (HPLC) - Appearance: White crystalline powder - Identification: IR conforms - Creatinine: ≤100 ppm - Dicyandiamide: ≤50 ppm - Loss on drying: ≤12.0% - Residue on ignition: ≤0.1% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Mesh: 80 or 200 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Sports powders, Capsules and tablets, Powder sticks and drink mixes, Functional beverages - Solubility: Soluble in water; the monohydrate is the stable crystalline form. #### Ergothioneine URL: https://nutrition.rainwoodbio.com/products/specialty/ergothioneine/ Chemical form: L-ergothioneine, crystalline Formula: C₉H₁₅N₃O₂S CAS: 497-30-3 Summary: L-ergothioneine specified at ≥99.5% by HPLC and a defined optical rotation, for capsules and powder blends where the purity, the isomer and the novel-food file have to be declared. Specification: - Assay (HPLC): ≥99.5% - Appearance: White to off-white crystalline powder - Identification: 1H-NMR and HPLC conform - Optical rotation: ≥ +122° (c = 1, water) - Loss on drying: ≤0.5% - Residue on ignition: ≤0.1% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Freely soluble in water; the solution is clear and colourless. #### Chondroitin Sulfate URL: https://nutrition.rainwoodbio.com/products/specialty/chondroitin-sulfate/ Chemical form: Chondroitin sulfate sodium, bovine cartilage Formula: Chondroitin sulfate sodium (glycosaminoglycan mixture) CAS: 9007-28-7 Summary: Bovine cartilage chondroitin sulfate sodium specified at 90.0–105.0% on the dried basis, for capsules and tablets where the assay, the source and the BSE/TSE file have to be declared. Specification: - Assay (dried basis): 90.0–105.0% (CPC titration) - Appearance: White to off-white powder - Identification: IR and electrophoretic profile conform - Loss on drying: ≤10.0% - pH (5% solution): 5.5–7.5 - Protein: ≤6.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Soluble in water; the solution is viscous. #### Hyaluronic Acid URL: https://nutrition.rainwoodbio.com/products/specialty/hyaluronic-acid/ Chemical form: Sodium hyaluronate, food grade Formula: Sodium hyaluronate (glycosaminoglycan) CAS: 9067-32-7 Summary: Food-grade sodium hyaluronate specified at ≥91% sodium hyaluronate and ≥44% glucuronic acid, with a declared molecular-weight range, for capsules and powder blends where the grade and the molecular weight have to be declared. Specification: - Sodium hyaluronate: ≥91.0% - Glucuronic acid: ≥44.0% - Molecular weight: 1.0–1.5 MDa - Appearance: White to off-white powder - pH (1% solution): 6.0–7.5 - Protein: ≤0.1% - Loss on drying: ≤10.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Functional beverages - Solubility: Soluble in water; the solution is clear and viscous. #### MSM URL: https://nutrition.rainwoodbio.com/products/specialty/msm/ Chemical form: Methylsulfonylmethane, crystalline Formula: C₂H₆O₂S CAS: 67-71-0 Summary: Methylsulfonylmethane specified at 99.0–101.0% on the anhydrous basis with ≥99.8% chromatographic purity, for capsules and powder blends where the purity and the melting range have to be declared. Specification: - Assay (anhydrous basis): 99.0–101.0% (HPLC) - Chromatographic purity: ≥99.8% - Appearance: White crystalline powder - Melting range: 108.5–110.5 °C - Loss on drying: ≤0.5% - Residue on ignition: ≤0.1% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Freely soluble in water; the solution is close to neutral. #### Melatonin URL: https://nutrition.rainwoodbio.com/products/specialty/melatonin/ Chemical form: Melatonin, crystalline Formula: C₁₃H₁₆N₂O₂ CAS: 73-31-4 Summary: Melatonin specified at 98.5–101.5% on the dried basis, for markets and uses where melatonin is lawfully permitted; the regulatory status of the destination market is part of the specification. Specification: - Assay (dried basis): 98.5–101.5% (HPLC) - Appearance: White to pale-white crystalline powder - Identification: IR conforms - Melting range: 117–120 °C - Loss on drying: ≤0.5% - Residue on ignition: ≤0.1% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Sparingly soluble in water; soluble in alcohol. #### 5-HTP URL: https://nutrition.rainwoodbio.com/products/specialty/5-htp/ Chemical form: 5-Hydroxytryptophan, crystalline Formula: C₁₁H₁₂N₂O₃ CAS: 56-69-9 Summary: 5-HTP specified at 98.0–101.0% on the dried basis, for markets and uses where 5-HTP is lawfully permitted; the source and the destination-market status are part of the specification. Specification: - Assay (dried basis): 98.0–101.0% (HPLC) - Appearance: Off-white to pale cream crystalline powder - Identification: IR and UV conform - Loss on drying: ≤0.5% - Residue on ignition: ≤0.1% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Sparingly soluble in water; soluble in dilute acid. #### NMN URL: https://nutrition.rainwoodbio.com/products/specialty/nmn/ Chemical form: β-Nicotinamide mononucleotide, powder Formula: C₁₁H₁₅N₂O₈P CAS: 1094-61-7 Summary: β-NMN specified at ≥98.0% by HPLC, for markets and uses where NMN is lawfully permitted; the regulatory status of the destination market is a condition of supply. Specification: - Purity (HPLC): ≥98.0% - Appearance: White to off-white powder - Identification: HPLC and NMR conform - pH (5% solution): 2.0–4.0 - Water (Karl Fischer): ≤5.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Freely soluble in water; the 5% solution is acidic (pH 2.0–4.0). #### Urolithin A URL: https://nutrition.rainwoodbio.com/products/specialty/urolithin-a/ Chemical form: Urolithin A, powder Formula: C₁₃H₈O₄ CAS: 1143-70-0 Summary: Urolithin A specified at 98.0–102.0% by HPLC, for markets and uses where urolithin A is lawfully permitted; the authorization status of the destination market is part of the specification. Specification: - Assay (HPLC): 98.0–102.0% - Appearance: Off-white to yellow powder - Identification: HPLC and NMR conform - Loss on drying: ≤1.0% - Residual solvents: Methanol ≤3,000 ppm - Heavy metals: Pb ≤1 · As ≤1 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Sparingly soluble in water; soluble in dimethyl sulfoxide. #### Spermidine URL: https://nutrition.rainwoodbio.com/products/specialty/spermidine/ Chemical form: Spermidine, crystalline or melt Formula: C₇H₁₉N₃ CAS: 124-20-9 Summary: Spermidine specified at ≥98.5% by GC/HPLC, for markets and uses where spermidine is lawfully permitted; the source route and the destination-market status are part of the specification. Specification: - Assay (GC/HPLC): ≥98.5% - Appearance: White to pale cream crystalline solid or melt - Identification: GC/HPLC and IR conform - Water (Karl Fischer): ≤1.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Freely soluble in water; hygroscopic. #### PQQ URL: https://nutrition.rainwoodbio.com/products/specialty/pqq/ Chemical form: Pyrroloquinoline quinone disodium salt Formula: C₁₄H₄N₂Na₂O₈ CAS: 122628-50-6 Summary: PQQ disodium salt specified at 98.0–102.0% on the anhydrous basis, for markets and uses where PQQ is lawfully permitted; the salt form and the destination-market status are part of the specification. Specification: - Assay (anhydrous basis): 98.0–102.0% (HPLC) - Appearance: Reddish-brown to dark red powder - Identification: HPLC and UV conform - Loss on drying: ≤5.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Soluble in water; the solution is reddish-brown. #### Glucosamine URL: https://nutrition.rainwoodbio.com/products/specialty/glucosamine/ Chemical form: D-Glucosamine hydrochloride, powder Formula: C₆H₁₄ClNO₅ CAS: 66-84-2 Summary: Glucosamine hydrochloride specified at 98.0–102.0% on the dried basis, with chloride, specific rotation and moisture; the salt form and the shellfish or fermentation source are part of the specification. Specification: - Assay (dried basis): 98.0–102.0% (HPLC) - Appearance: White crystalline powder - Identification: IR and HPLC conform - Specific rotation: +70.0° to +73.0° (dried basis) - Chloride: 16.2–17.0% - Loss on drying: ≤1.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Freely soluble in water; the solution is acidic. #### N-Acetyl Glucosamine URL: https://nutrition.rainwoodbio.com/products/specialty/n-acetyl-glucosamine/ Chemical form: N-Acetyl-D-glucosamine, powder Formula: C₈H₁₅NO₆ CAS: 7512-17-6 Summary: N-Acetyl glucosamine specified at 98.0–102.0% by HPLC, with rotation, moisture and the source statement; NAG and glucosamine are different label ingredients. Specification: - Assay (HPLC): 98.0–102.0% - Appearance: White to off-white powder - Identification: IR and HPLC conform - Specific rotation: +40.0° to +43.0° (dry basis) - Loss on drying: ≤1.0% - pH (5% solution): 3.5–5.0 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Soluble in water; the solution is slightly acidic. #### Chitosan URL: https://nutrition.rainwoodbio.com/products/specialty/chitosan/ Chemical form: Deacetylated chitin, powder or flakes Formula: (C₆H₁₁NO₄)ₙ CAS: 9012-76-4 Summary: Chitosan specified by degree of deacetylation and viscosity, with moisture, ash and insoluble matter; the source and the food-grade route are part of the specification. Specification: - Degree of deacetylation: ≥85% (titration) - Viscosity (1% in 1% acetic acid): 50–200 mPa·s - Appearance: Off-white to pale yellow powder or flakes - Moisture: ≤10.0% - Ash: ≤1.0% - Insoluble matter: ≤1.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Soluble in dilute acetic acid; insoluble in water and in neutral or alkaline solutions. #### Glutathione URL: https://nutrition.rainwoodbio.com/products/specialty/glutathione/ Chemical form: L-Glutathione, reduced, powder Formula: C₁₀H₁₇N₃O₆S CAS: 70-18-8 Summary: Reduced L-glutathione specified at 98.0–101.0% by HPLC, with the oxidized form, moisture and heavy metals; reduced and oxidized glutathione are different specifications. Specification: - Assay (HPLC): 98.0–101.0% - Appearance: White to off-white powder - Identification: HPLC and IR conform - Loss on drying: ≤1.0% - pH (5% solution): 2.0–3.0 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Freely soluble in water; the solution is acidic. #### Alpha-Lipoic Acid URL: https://nutrition.rainwoodbio.com/products/specialty/alpha-lipoic-acid/ Chemical form: Racemic α-lipoic acid, powder Formula: C₈H₁₄O₂S₂ CAS: 1077-28-7 Summary: Racemic alpha-lipoic acid specified at 99.0–101.0% by HPLC, with melting point, moisture and heavy metals; the R-form is a different specification. Specification: - Assay (HPLC): 99.0–101.0% - Appearance: Yellow crystalline powder - Identification: IR and HPLC conform - Melting point: 60–62 °C - Loss on drying: ≤0.5% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Slightly soluble in water; soluble in ethanol and in alkaline solutions. #### NAD+ URL: https://nutrition.rainwoodbio.com/products/specialty/nad/ Chemical form: β-Nicotinamide adenine dinucleotide, powder Formula: C₂₁H₂₇N₇O₁₄P₂ CAS: 53-84-9 Summary: β-NAD specified at ≥95.0% by HPLC, with water, pH and heavy metals; NAD+ and NADH are different materials and different specifications. Specification: - Assay (HPLC): ≥95.0% - Appearance: White to off-white powder - Identification: HPLC and UV conform - Water (Karl Fischer): ≤5.0% - pH (1% solution): 2.0–4.0 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Freely soluble in water; the solution is acidic. #### Nicotinamide Riboside URL: https://nutrition.rainwoodbio.com/products/specialty/nicotinamide-riboside/ Chemical form: Nicotinamide riboside chloride, powder Formula: C₁₁H₁₅ClN₂O₅ CAS: 23111-00-4 Summary: Nicotinamide riboside chloride specified at 98.0–102.0% by HPLC, with chloride, water and heavy metals; the chloride salt and the free base are different specifications. Specification: - Assay (HPLC): 98.0–102.0% - Appearance: White to off-white powder - Identification: HPLC and NMR conform - Chloride: 12.0–13.0% - Water: ≤2.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Freely soluble in water. #### Carnosine URL: https://nutrition.rainwoodbio.com/products/specialty/carnosine/ Chemical form: L-Carnosine, powder Formula: C₉H₁₄N₄O₃ CAS: 305-84-0 Summary: L-Carnosine specified at 98.0–101.0% by HPLC, with rotation, moisture and heavy metals; zinc-carnosine is a different material. Specification: - Assay (HPLC): 98.0–101.0% - Appearance: White powder - Identification: IR and HPLC conform - Specific rotation: +20.0° to +22.0° (dry basis) - Loss on drying: ≤1.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Freely soluble in water. #### Citicoline URL: https://nutrition.rainwoodbio.com/products/specialty/citicoline/ Chemical form: Citicoline free acid, powder Formula: C₁₄H₂₆N₄O₁₁P₂ CAS: 987-78-0 Summary: Citicoline specified at 98.0–102.0% by HPLC, with water, pH and heavy metals; the free acid and the sodium salt are different specifications. Specification: - Assay (HPLC): 98.0–102.0% - Appearance: White powder - Identification: HPLC and UV conform - Water: ≤5.0% - pH (5% solution): 2.5–4.5 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Freely soluble in water; the solution is acidic. #### Alpha-GPC URL: https://nutrition.rainwoodbio.com/products/specialty/alpha-gpc/ Chemical form: L-Alpha-glycerylphosphorylcholine, 85% powder Formula: C₈H₂₀NO₆P CAS: 28319-77-9 Summary: L-Alpha-GPC specified at 85.0–90.0% by HPLC, with choline content, water and heavy metals; 50% and 85% grades are different specifications. Specification: - Assay (HPLC): 85.0–90.0% - Appearance: White to off-white powder - Identification: HPLC conform - Choline content: 40.0–45.0% - Water: ≤3.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Very soluble in water; the powder is deliquescent and must be packed dry. #### D-Ribose URL: https://nutrition.rainwoodbio.com/products/specialty/d-ribose/ Chemical form: D-Ribose, powder Formula: C₅H₁₀O₅ CAS: 50-69-1 Summary: D-Ribose specified at 98.0–101.0% by HPLC, with rotation, moisture and heavy metals; D-ribose and D-deoxyribose are different materials. Specification: - Assay (HPLC): 98.0–101.0% - Appearance: White crystalline powder - Identification: IR and HPLC conform - Specific rotation: -20.0° to -22.0° (dry basis) - Loss on drying: ≤0.5% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Freely soluble in water; the solution is sweet. #### Alpha-Ketoglutarate URL: https://nutrition.rainwoodbio.com/products/specialty/alpha-ketoglutarate/ Chemical form: α-Ketoglutaric acid, powder Formula: C₅H₆O₅ CAS: 328-50-7 Summary: α-Ketoglutaric acid specified at 98.0–102.0% by HPLC, with water, pH and heavy metals; the acid and the calcium salt are different specifications. Specification: - Assay (HPLC): 98.0–102.0% - Appearance: White crystalline powder - Identification: IR and HPLC conform - Water: ≤1.0% - pH (5% solution): 2.0–3.0 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Freely soluble in water; the solution is acidic. #### Beta-Glucan URL: https://nutrition.rainwoodbio.com/products/specialty/beta-glucan/ Chemical form: Yeast-derived β-1,3/1,6-glucan, powder Formula: (C₆H₁₀O₅)ₙ CAS: 9041-22-9 Summary: Yeast-derived β-1,3/1,6-glucan specified at ≥70% β-glucan, with moisture, ash and protein; the source and the linkage ratio are part of the specification. Specification: - β-Glucan content: ≥70% (enzymatic) - Appearance: Off-white to light brown powder - Identification: Enzymatic and HPLC conform - Moisture: ≤6.0% - Ash: ≤3.0% - Protein: ≤5.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Dispersible in water; the powder forms a viscous suspension at higher concentrations. #### D-Mannose URL: https://nutrition.rainwoodbio.com/products/specialty/d-mannose/ Chemical form: D-Mannose, powder Formula: C₆H₁₂O₆ CAS: 3458-28-4 Summary: D-Mannose specified at 98.0–101.0% by HPLC, with rotation, moisture and heavy metals; D-mannose and mannitol are different materials. Specification: - Assay (HPLC): 98.0–101.0% - Appearance: White crystalline powder - Identification: IR and HPLC conform - Specific rotation: +14.0° to +16.0° (dry basis) - Loss on drying: ≤0.5% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Freely soluble in water; the solution is sweet. #### Sialic Acid URL: https://nutrition.rainwoodbio.com/products/specialty/sialic-acid/ Chemical form: N-Acetylneuraminic acid, powder Formula: C₁₁H₁₉NO₉ CAS: 131-48-6 Summary: N-Acetylneuraminic acid specified at ≥98.0% by HPLC, with water, pH and heavy metals; sialic acid and sialyllactose are different materials. Specification: - Assay (HPLC): ≥98.0% - Appearance: White to off-white powder - Identification: HPLC and IR conform - Water: ≤5.0% - pH (1% solution): 2.0–3.5 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Freely soluble in water; the solution is acidic. #### Policosanol URL: https://nutrition.rainwoodbio.com/products/specialty/policosanol/ Chemical form: Policosanol, powder Formula: C₂₈H₅₈O (octacosanol) CAS: 557-61-9 (octacosanol) Summary: Policosanol specified at ≥90% total alcohols by GC, with the octacosanol share, melting point and moisture; the composition is the specification. Specification: - Total policosanol (GC): ≥90% - Octacosanol share: ≥60% (GC) - Appearance: White to off-white powder - Melting point: 78–82 °C - Moisture: ≤1.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Insoluble in water; soluble in ethanol and in warm fats and oils. #### Gamma-Oryzanol URL: https://nutrition.rainwoodbio.com/products/specialty/gamma-oryzanol/ Chemical form: γ-Oryzanol, powder Formula: C₄₀H₅₈O₄ (cycloartenyl ferulate) CAS: 11042-64-1 Summary: γ-Oryzanol specified at ≥95% by HPLC, with the ferulate profile, melting point and moisture; the ester composition is part of the specification. Specification: - Assay (HPLC): ≥95.0% - Appearance: White to off-white powder - Identification: HPLC and UV conform - Melting point: 135–140 °C - Moisture: ≤1.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Insoluble in water; soluble in ethanol and in warm oils. #### SAMe URL: https://nutrition.rainwoodbio.com/products/specialty/same/ Chemical form: S-Adenosyl-L-methionine disulfate tosylate, powder Formula: C₁₅H₂₂N₆O₅S CAS: 29908-03-0 Summary: SAMe specified at ≥97.0% by HPLC as the disulfate tosylate salt, with the salt form, water and heavy metals; SAMe is unstable as the free base and is sold as a salt. Specification: - Assay (HPLC, as salt): ≥97.0% - Appearance: White to off-white powder - Identification: HPLC and UV conform - Water: ≤5.0% - pH (5% solution): 2.0–4.0 - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Freely soluble in water; the solution is acidic. #### Glucosamine Sulfate URL: https://nutrition.rainwoodbio.com/products/specialty/glucosamine-sulfate/ Chemical form: Glucosamine sulfate 2KCl, powder Formula: (C₆H₁₃NO₅)₂·H₂SO₄·2KCl CAS: 14999-43-0 Summary: Glucosamine sulfate specified at 98.0–102.0% by HPLC with 15.0–17.0% sulfate; the sulfate salt and glucosamine hydrochloride are different products with different counter-ions and labels. Specification: - Assay (HPLC): 98.0–102.0% - Sulfate (titration): 15.0–17.0% - Appearance: White to off-white powder - Identification: HPLC and sulfate conform - Loss on drying: ≤1.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Soluble in water; the solution is clear to slightly opalescent. #### PQQ Free Acid URL: https://nutrition.rainwoodbio.com/products/specialty/pqq-free-acid/ Chemical form: Pyrroloquinoline quinone, free acid Formula: C₁₄H₆N₂O₈ CAS: 72909-34-3 Summary: PQQ free acid specified at ≥98.0% by HPLC; the free acid and the disodium salt are different products with different solubility, pH and label arithmetic. Specification: - Assay (HPLC): ≥98.0% - Appearance: Red-orange to brown powder - Identification: HPLC and UV conform - Loss on drying: ≤1.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Slightly soluble in water; soluble in alkaline solutions. #### R-Alpha-Lipoic Acid URL: https://nutrition.rainwoodbio.com/products/specialty/r-alpha-lipoic-acid/ Chemical form: R-alpha-lipoic acid, powder Formula: C₈H₁₄O₂S₂ CAS: 1200-22-2 Summary: R-Alpha-lipoic acid specified at 99.0–101.0% by HPLC with specific rotation; the R-enantiomer and racemic alpha-lipoic acid are different products with different potency and labels. Specification: - Assay (HPLC): 99.0–101.0% - Appearance: Yellow to pale yellow powder - Identification: HPLC and IR conform - Specific rotation: +110° to +125° (c=1, ethanol) - Melting point: 46–50 °C - Loss on drying: ≤0.5% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Slightly soluble in water; soluble in ethanol and in fats. #### NADH URL: https://nutrition.rainwoodbio.com/products/specialty/nadh/ Chemical form: NADH disodium salt, powder Formula: C₂₁H₂₇N₇Na₂O₁₄P₂ CAS: 606-68-8 Summary: NADH disodium salt specified at ≥95.0% by HPLC; the reduced coenzyme and NAD+ are different products with different stability and labels. Specification: - Assay (HPLC): ≥95.0% - Appearance: White to pale yellow powder - Identification: HPLC and UV conform - Loss on drying: ≤8.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Soluble in water; the solution is clear to slightly yellow. #### Creatine HCl URL: https://nutrition.rainwoodbio.com/products/specialty/creatine-hcl/ Chemical form: Creatine hydrochloride, powder Formula: C₄H₉N₃O₂·HCl CAS: 17050-09-8 Summary: Creatine hydrochloride specified at 99.0–101.0% by HPLC with 74.0–78.0% creatine; the hydrochloride and creatine monohydrate are different products with different solubility and fill weight. Specification: - Assay (HPLC): 99.0–101.0% - Creatine content: 74.0–78.0% - Appearance: White to off-white powder - Identification: HPLC and IR conform - Loss on drying: ≤1.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Freely soluble in water; the solution is acidic. #### Coenzyme Q10 URL: https://nutrition.rainwoodbio.com/products/specialty/coenzyme-q10/ Chemical form: Ubiquinone, powder Formula: C₅₉H₉₀O₄ CAS: 303-98-0 Summary: Coenzyme Q10 as ubiquinone specified at 98.0–101.0% by HPLC with melting point and loss on drying; the oxidised ubiquinone and the reduced ubiquinol are different products with different stability and labels. Specification: - Assay (HPLC): 98.0–101.0% - Appearance: Yellow to orange-yellow powder - Identification: HPLC and UV conform - Melting point: 48–52 °C - Loss on drying: ≤1.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Softgel capsules, Capsules and tablets, Oil-based blends - Solubility: Insoluble in water; soluble in fats and in organic solvents. #### Ubiquinol URL: https://nutrition.rainwoodbio.com/products/specialty/ubiquinol/ Chemical form: Ubiquinol, powder or oil Formula: C₅₉H₉₂O₄ CAS: 992-78-9 Summary: Ubiquinol specified at ≥95.0% by HPLC with a bound ubiquinone limit; the reduced ubiquinol and the oxidised ubiquinone are different products with different stability and labels. Specification: - Assay (HPLC): ≥95.0% - Ubiquinone (oxidation): ≤2.0% - Appearance: White to pale yellow powder or oil - Identification: HPLC and UV conform - Loss on drying: ≤5.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Softgel capsules, Capsules and tablets, Oil-based blends - Solubility: Insoluble in water; soluble in fats and in organic solvents. #### HMB URL: https://nutrition.rainwoodbio.com/products/specialty/hmb/ Chemical form: Calcium β-hydroxy-β-methylbutyrate, powder Formula: C₁₀H₁₈CaO₆ CAS: 135236-72-5 Summary: HMB as the calcium salt specified at 98.0–102.0% by HPLC with 12.0–14.0% calcium; the calcium salt and the free acid are different products with different solubility and labels. Specification: - Assay (HPLC): 98.0–102.0% - Calcium: 12.0–14.0% - Appearance: White to off-white powder - Identification: HPLC and IR conform - Loss on drying: ≤5.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Soluble in water; the solution is clear. #### Beta-Glucan Oat URL: https://nutrition.rainwoodbio.com/products/specialty/beta-glucan-oat/ Chemical form: Oat beta-glucan, powder Formula: — CAS: 9012-72-0 Summary: Oat beta-glucan specified at ≥70.0% by enzymatic assay with protein, moisture and ash limits; the oat source and the beta-glucan figure are the specification. Specification: - Beta-glucan (enzymatic): ≥70.0% - Protein: ≤5.0% - Moisture: ≤7.0% - Ash: ≤3.0% - Appearance: Off-white to light tan powder - Identification: Beta-glucan profile conform - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes, Bakery - Solubility: Dispersible in water; the dispersion is viscous. #### Chondroitin Sulfate Shark URL: https://nutrition.rainwoodbio.com/products/specialty/chondroitin-sulfate-shark/ Chemical form: Shark cartilage chondroitin sulfate, powder Formula: — CAS: 9007-28-7 Summary: Shark chondroitin sulfate specified at 90.0–105.0% by CPC titration with sulfate and protein limits; the shark source and the chondroitin figure are the specification. Specification: - Assay (CPC): 90.0–105.0% - Sulfate: 15.0–20.0% - Protein: ≤5.0% - Loss on drying: ≤10.0% - Appearance: White to off-white powder - Identification: CPC and HPLC conform - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Soluble in water; the solution is viscous. #### Chondroitin Sulfate Porcine URL: https://nutrition.rainwoodbio.com/products/specialty/chondroitin-sulfate-porcine/ Chemical form: Porcine chondroitin sulfate, powder Formula: — CAS: 9007-28-7 Summary: Porcine chondroitin sulfate specified at 90.0–105.0% by CPC titration with sulfate and protein limits; the porcine source and the chondroitin figure are the specification. Specification: - Assay (CPC): 90.0–105.0% - Sulfate: 15.0–20.0% - Protein: ≤5.0% - Loss on drying: ≤10.0% - Appearance: White to off-white powder - Identification: CPC and HPLC conform - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Soluble in water; the solution is viscous. #### Spermidine Fermentation URL: https://nutrition.rainwoodbio.com/products/specialty/spermidine-fermentation/ Chemical form: Spermidine trihydrochloride, fermentation-derived Formula: C₇H₁₉N₃ CAS: 124-20-9 Summary: Fermentation-derived spermidine trihydrochloride specified at ≥98.0% by HPLC with a putrescine limit; the fermentation source and the polyamine profile are the specification. Specification: - Assay (HPLC): ≥98.0% - Putrescine: ≤0.5% - Appearance: White to off-white powder - Identification: HPLC and IR conform - Loss on drying: ≤1.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Freely soluble in water; the solution is acidic. #### Hyaluronic Acid Low MW URL: https://nutrition.rainwoodbio.com/products/specialty/hyaluronic-acid-low-mw/ Chemical form: Low-molecular-weight hyaluronic acid, powder Formula: — CAS: 9004-61-9 Summary: Low-molecular-weight hyaluronic acid specified at ≥95.0% by HPLC with a 20–80 kDa molecular weight window; the molecular weight and the source are the specification. Specification: - Assay (HPLC): ≥95.0% - Molecular weight: 20–80 kDa (SEC-MALS) - Appearance: White to off-white powder - Identification: HPLC and IR conform - Loss on drying: ≤10.0% - Protein: ≤0.1% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder sticks and drink mixes - Solubility: Soluble in water; the solution is clear and viscous. ### Enzymes An enzyme is sold by activity, not by weight. The unit definition, the substrate and the assay conditions decide what the number means, and the activity can fall during tableting, granulation or storage. This range is specified around the unit, the assay and the stability data for the dosage form, not around a generic potency claim. #### Cellulase URL: https://nutrition.rainwoodbio.com/products/enzymes/cellulase/ Chemical form: Cellulase powder from Aspergillus niger Formula: Cellulase enzyme preparation CAS: 9012-54-8 Summary: Food-grade cellulase powder standardized to ≥50,000 CU/g, for enzyme blends where the activity unit, the assay substrate and the activity after processing have to be declared. Specification: - Cellulase activity: ≥50,000 CU/g - Appearance: Off-white to light tan powder - pH (1% solution): 4.5–5.5 - Loss on drying: ≤8.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤10,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Enzyme blends, Powder sticks and drink mixes, Functional beverages - Solubility: Soluble in water; the solution is clear to slightly hazy. #### Bromelain URL: https://nutrition.rainwoodbio.com/products/enzymes/bromelain/ Chemical form: Bromelain powder from pineapple stem Formula: Bromelain enzyme preparation CAS: 9001-00-7 Summary: Food-grade bromelain powder standardized to ≥2,400 GDU/g, for enzyme blends where the activity unit, the assay substrate and the activity after processing have to be declared. Specification: - Bromelain activity: ≥2,400 GDU/g - Appearance: Off-white to light tan powder - pH (1% solution): 5.0–7.0 - Loss on drying: ≤5.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤10,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Enzyme blends, Powder sticks and drink mixes - Solubility: Soluble in water; the solution is clear to slightly hazy. #### Lipase URL: https://nutrition.rainwoodbio.com/products/enzymes/lipase/ Chemical form: Lipase powder from Candida rugosa Formula: Lipase enzyme preparation CAS: 9001-62-1 Summary: Food-grade lipase powder standardized to ≥100,000 LU/g, for enzyme blends where the activity unit, the assay substrate and the activity after processing have to be declared. Specification: - Lipase activity: ≥100,000 LU/g - Appearance: Off-white to light tan powder - pH (1% solution): 7.0–7.5 - Loss on drying: ≤8.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤10,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Enzyme blends, Powder sticks and drink mixes - Solubility: Soluble in water; the solution is clear to slightly hazy. #### Papain URL: https://nutrition.rainwoodbio.com/products/enzymes/papain/ Chemical form: Papain powder from Carica papaya latex Formula: Papain enzyme preparation CAS: 9001-73-4 Summary: Food-grade papain powder standardized to ≥6,000 USP units/mg, for enzyme blends where the unit definition, the assay substrate and the activity after processing have to be declared. Specification: - Papain activity: ≥6,000 USP units/mg - Appearance: Off-white to light tan powder - pH (1% solution): 5.0–7.5 - Loss on drying: ≤8.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤10,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Enzyme blends, Powder sticks and drink mixes - Solubility: Soluble in water; the solution is clear to slightly hazy. #### Neutral Protease URL: https://nutrition.rainwoodbio.com/products/enzymes/neutral-protease/ Chemical form: Neutral protease powder from Bacillus subtilis Formula: Neutral protease enzyme preparation CAS: 9025-39-2 Summary: Food-grade neutral protease powder standardized to ≥50,000 U/g, for enzyme blends where the unit definition, the assay substrate and the activity after processing have to be declared. Specification: - Neutral protease activity: ≥50,000 U/g - Appearance: Off-white to light brown powder - pH (1% solution): 6.5–7.5 - Loss on drying: ≤8.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤10,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Enzyme blends, Powder sticks and drink mixes - Solubility: Soluble in water; the solution is clear to slightly hazy. #### Nattokinase URL: https://nutrition.rainwoodbio.com/products/enzymes/nattokinase/ Chemical form: Nattokinase powder from Bacillus subtilis natto Formula: Nattokinase enzyme preparation CAS: 9014-01-1 Summary: Nattokinase powder standardized to ≥20,000 FU/g, from Bacillus subtilis natto, for enzyme blends where the unit definition, the assay substrate and the activity after processing have to be declared. Specification: - Nattokinase activity: ≥20,000 FU/g - Appearance: Off-white to light tan powder - pH (1% solution): 6.0–8.0 - Loss on drying: ≤8.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤10,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Enzyme blends, Powder sticks and drink mixes - Solubility: Soluble in water; the solution is clear to slightly hazy. #### Lactase URL: https://nutrition.rainwoodbio.com/products/enzymes/lactase/ Chemical form: Lactase powder from Aspergillus oryzae Formula: Lactase (beta-galactosidase) enzyme preparation CAS: 9031-11-2 Summary: Food-grade lactase powder standardized to ≥100,000 ALU/g, from Aspergillus oryzae, for enzyme blends where the unit definition, the assay substrate and the activity after processing have to be declared. Specification: - Lactase activity: ≥100,000 ALU/g - Appearance: White to light brown powder - pH (1% solution): 3.0–8.0 - Loss on drying: ≤8.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤10,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Enzyme blends, Powder sticks and drink mixes - Solubility: Soluble in water; the solution is clear to slightly hazy. #### Amylase URL: https://nutrition.rainwoodbio.com/products/enzymes/amylase/ Chemical form: Fungal alpha-amylase powder from Aspergillus oryzae Formula: Alpha-amylase enzyme preparation CAS: 9000-90-2 Summary: Food-grade fungal alpha-amylase powder standardized to ≥100,000 SKB/g, from Aspergillus oryzae, for enzyme blends where the unit definition, the assay substrate and the activity after processing have to be declared. Specification: - Amylase activity: ≥100,000 SKB/g - Appearance: Off-white to light tan powder - pH (1% solution): 4.8–5.4 - Loss on drying: ≤8.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤10,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Enzyme blends, Powder sticks and drink mixes - Solubility: Soluble in water; the solution is clear to slightly hazy. #### Alkaline Protease URL: https://nutrition.rainwoodbio.com/products/enzymes/alkaline-protease/ Chemical form: Alkaline protease powder from Bacillus licheniformis Formula: Alkaline protease enzyme preparation CAS: 9014-01-1 Summary: Food-grade alkaline protease powder standardized to ≥200,000 U/g, for enzyme blends where the unit definition, the assay substrate and the activity after processing have to be declared. Specification: - Alkaline protease activity: ≥200,000 U/g - Appearance: Off-white to light tan powder - pH (1% solution): 8.0–10.0 - Loss on drying: ≤8.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤10,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Enzyme blends, Powder sticks and drink mixes - Solubility: Soluble in water; the solution is clear to slightly hazy. #### Lysozyme URL: https://nutrition.rainwoodbio.com/products/enzymes/lysozyme/ Chemical form: Lysozyme hydrochloride, powder Formula: — CAS: 9001-63-2 Summary: Lysozyme hydrochloride specified at ≥20,000 U/mg by the turbidimetric assay; the unit definition, the substrate and the salt form are part of the specification. Specification: - Activity (lysozyme units): ≥20,000 U/mg - Appearance: White to off-white powder - Identification: Activity assay and IR conform - Loss on drying: ≤5.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Freely soluble in water; the solution is clear to slightly opalescent. #### Pancreatin URL: https://nutrition.rainwoodbio.com/products/enzymes/pancreatin/ Chemical form: Pancreatin, powder Formula: — CAS: 8049-47-6 Summary: Pancreatin specified to the USP triad: amylase, protease and lipase activities; the three units, the assay substrates and the ratio are the specification. Specification: - Amylase activity: ≥25 USP U/mg - Protease activity: ≥25 USP U/mg - Lipase activity: ≥2 USP U/mg - Appearance: Off-white to light tan powder - Identification: Activity assay and IR conform - Loss on drying: ≤5.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Soluble in water; the solution is slightly turbid. #### Trypsin URL: https://nutrition.rainwoodbio.com/products/enzymes/trypsin/ Chemical form: Trypsin, powder Formula: — CAS: 9002-07-7 Summary: Trypsin specified at ≥250 USP U/mg by the BAEE assay; the unit definition, the substrate and the autolysis profile are part of the specification. Specification: - Activity (USP units): ≥250 USP U/mg - Appearance: White to off-white powder - Identification: Activity assay and IR conform - Loss on drying: ≤5.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Freely soluble in water; the solution is clear. #### Acid Protease URL: https://nutrition.rainwoodbio.com/products/enzymes/acid-protease/ Chemical form: Acid protease, powder Formula: — CAS: 9025-49-4 Summary: Acid protease specified at ≥100,000 U/g by the Folin-Ciocalteu assay at acid pH; the unit definition, the pH and the substrate are part of the specification. Specification: - Activity (units): ≥100,000 U/g - Appearance: White to off-white powder - Identification: Activity assay and IR conform - Loss on drying: ≤8.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Soluble in water; the solution is acidic. #### Catalase URL: https://nutrition.rainwoodbio.com/products/enzymes/catalase/ Chemical form: Catalase, powder Formula: — CAS: 9001-05-2 Summary: Catalase specified at ≥10,000 U/g by the UV hydrogen-peroxide assay; the unit definition, the substrate concentration and the pH are part of the specification. Specification: - Activity (units): ≥10,000 U/g - Appearance: White to off-white powder - Identification: Activity assay and IR conform - Loss on drying: ≤8.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Soluble in water; the solution is clear to slightly turbid. #### Pepsin URL: https://nutrition.rainwoodbio.com/products/enzymes/pepsin/ Chemical form: Pepsin, powder Formula: — CAS: 9001-75-6 Summary: Pepsin specified at 1:10,000 activity by the haemoglobin assay; the ratio, the assay substrate and the pH are part of the specification. Specification: - Activity (ratio): 1:10,000 - Appearance: White to off-white powder - Identification: Activity assay and IR conform - Loss on drying: ≤8.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Soluble in water; the solution is acidic. #### Serratiopeptidase URL: https://nutrition.rainwoodbio.com/products/enzymes/serratiopeptidase/ Chemical form: Serratiopeptidase, powder Formula: — CAS: 37312-62-2 Summary: Serratiopeptidase specified at ≥20,000 U/g by the casein Folin assay; the unit definition, the substrate and the assay pH are part of the specification. Specification: - Activity (units): ≥20,000 U/g - Appearance: White to off-white powder - Identification: Activity assay and IR conform - Loss on drying: ≤5.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Soluble in water; the solution is clear to slightly turbid. #### Superoxide Dismutase URL: https://nutrition.rainwoodbio.com/products/enzymes/superoxide-dismutase/ Chemical form: Superoxide dismutase, powder Formula: — CAS: 9054-89-1 Summary: Superoxide dismutase specified at ≥10,000 U/g by the xanthine-oxidase/NBT assay; the unit definition, the substrate system and the pH are part of the specification. Specification: - Activity (units): ≥10,000 U/g - Appearance: White to off-white powder - Identification: Activity assay and IR conform - Loss on drying: ≤8.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Soluble in water; the solution is clear to slightly opalescent. #### Chymotrypsin URL: https://nutrition.rainwoodbio.com/products/enzymes/chymotrypsin/ Chemical form: Chymotrypsin, powder Formula: — CAS: 9004-07-3 Summary: Chymotrypsin specified at ≥1,000 USP U/mg by the ATEE assay; the unit definition, the substrate and the trypsin limit are part of the specification. Specification: - Activity (USP units): ≥1,000 USP U/mg - Appearance: White to off-white powder - Identification: Activity assay and IR conform - Loss on drying: ≤5.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Freely soluble in water; the solution is clear. #### Lumbrokinase URL: https://nutrition.rainwoodbio.com/products/enzymes/lumbrokinase/ Chemical form: Lumbrokinase, powder Formula: — CAS: 556743-18-1 Summary: Lumbrokinase specified at ≥20,000 U/g by the fibrin-plate assay; the unit definition, the substrate and the assay conditions are part of the specification. Specification: - Activity (units): ≥20,000 U/g - Appearance: White to off-white powder - Identification: Activity assay conform - Loss on drying: ≤5.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 40 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Capsules and tablets, Powder blends - Solubility: Soluble in water; the solution is clear to slightly turbid. #### Phytase URL: https://nutrition.rainwoodbio.com/products/enzymes/phytase/ Chemical form: Phytase, powder Formula: — CAS: 9001-89-2 Summary: Phytase specified at ≥10,000 FTU/g by the sodium-phytate assay; the unit definition, the assay pH and the substrate are part of the specification. Specification: - Activity (FTU): ≥10,000 FTU/g - Appearance: Off-white to light tan powder - Identification: Activity assay conform - Loss on drying: ≤8.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Feed and food processing, Powder blends - Solubility: Soluble in water; the solution is clear to slightly turbid. #### Xylanase URL: https://nutrition.rainwoodbio.com/products/enzymes/xylanase/ Chemical form: Xylanase, powder Formula: — CAS: 9025-57-4 Summary: Xylanase specified at ≥100,000 U/g by the xylan-substrate assay; the unit definition, the assay pH and the substrate are part of the specification. Specification: - Activity (units): ≥100,000 U/g - Appearance: Off-white to light tan powder - Identification: Activity assay conform - Loss on drying: ≤8.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Feed and food processing, Powder blends - Solubility: Soluble in water; the solution is clear to slightly turbid. #### Pectinase URL: https://nutrition.rainwoodbio.com/products/enzymes/pectinase/ Chemical form: Pectinase, powder Formula: — CAS: 9032-75-1 Summary: Pectinase specified at ≥30,000 U/g by the pectin-substrate assay; the unit definition, the assay pH and the substrate are part of the specification. Specification: - Activity (units): ≥30,000 U/g - Appearance: Off-white to light tan powder - Identification: Activity assay conform - Loss on drying: ≤8.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Fruit and juice processing, Powder blends - Solubility: Soluble in water; the solution is clear to slightly turbid. #### Beta-Glucanase URL: https://nutrition.rainwoodbio.com/products/enzymes/beta-glucanase/ Chemical form: Beta-glucanase, powder Formula: — CAS: 9025-70-1 Summary: Beta-glucanase specified at ≥50,000 U/g by the glucan-substrate assay; the unit definition, the assay pH and the substrate are part of the specification. Specification: - Activity (units): ≥50,000 U/g - Appearance: Off-white to light tan powder - Identification: Activity assay conform - Loss on drying: ≤8.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Feed and food processing, Powder blends - Solubility: Soluble in water; the solution is clear to slightly turbid. #### Invertase URL: https://nutrition.rainwoodbio.com/products/enzymes/invertase/ Chemical form: Invertase, powder Formula: — CAS: 9001-57-4 Summary: Invertase specified at ≥100,000 U/g by the sucrose-substrate assay; the unit definition, the assay pH and the substrate are part of the specification. Specification: - Activity (units): ≥100,000 U/g - Appearance: White to light tan powder - Identification: Activity assay conform - Loss on drying: ≤5.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Confectionery and food processing, Powder blends - Solubility: Soluble in water; the solution is clear to slightly turbid. #### Glucose Oxidase URL: https://nutrition.rainwoodbio.com/products/enzymes/glucose-oxidase/ Chemical form: Glucose oxidase, powder Formula: — CAS: 9001-37-0 Summary: Glucose oxidase specified at ≥10,000 U/g by the glucose/peroxidase assay; the unit definition, the assay pH and the substrate are part of the specification. Specification: - Activity (units): ≥10,000 U/g - Appearance: Yellow to light tan powder - Identification: Activity assay conform - Loss on drying: ≤8.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Food processing and preservation, Powder blends - Solubility: Soluble in water; the solution is clear to slightly turbid. #### Maltase URL: https://nutrition.rainwoodbio.com/products/enzymes/maltase/ Chemical form: Maltase, powder Formula: — CAS: 9001-42-7 Summary: Maltase specified at ≥100,000 U/g by the maltose-substrate assay; the unit definition, the assay pH and the substrate are part of the specification. Specification: - Activity (units): ≥100,000 U/g - Appearance: Off-white to light tan powder - Identification: Activity assay conform - Loss on drying: ≤8.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Food processing, Powder blends - Solubility: Soluble in water; the solution is clear to slightly turbid. #### Hemicellulase URL: https://nutrition.rainwoodbio.com/products/enzymes/hemicellulase/ Chemical form: Hemicellulase, powder Formula: — CAS: 9025-56-3 Summary: Hemicellulase specified at ≥50,000 U/g by the hemicellulose-substrate assay; the unit definition, the assay pH and the substrate are part of the specification. Specification: - Activity (units): ≥50,000 U/g - Appearance: Off-white to light tan powder - Identification: Activity assay conform - Loss on drying: ≤8.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Feed and food processing, Powder blends - Solubility: Soluble in water; the solution is clear to slightly turbid. #### Keratinase URL: https://nutrition.rainwoodbio.com/products/enzymes/keratinase/ Chemical form: Keratinase, powder Formula: — CAS: — Summary: Keratinase specified at ≥50,000 U/g by the keratin-substrate assay; the unit definition, the assay pH and the substrate are part of the specification. Specification: - Activity (units): ≥50,000 U/g - Appearance: Off-white to light tan powder - Identification: Activity assay conform - Loss on drying: ≤8.0% - Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg - Microbiology: APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent - Particle size: ≥95% through 80 mesh - MOQ: 1 kg - Lead time: 1–7 days - Packaging: 1 kg foil pouch; 25 kg fiber drum - Applications: Feed and waste processing, Powder blends - Solubility: Soluble in water; the solution is clear to slightly turbid. ## Testing panel ### Identity and assay - Magnesium by complexometric titration (EDTA) or ICP-OES - Glycine content by HPLC, and the calculated Mg : glycine molar ratio - Free glycine, to show unreacted ligand - XRD screen for crystalline magnesium oxide in chelated grades ### Physical and process - Appearance, colour and odour - Loss on drying and hydrate form - pH of a 5% suspension - Particle size distribution and bulk density ### Contaminants - Lead, arsenic, cadmium and mercury by ICP-MS - Microbiology: APC, yeast and mould, E. coli, Salmonella - Residual solvents matched to the crystallisation system - Foreign matter and acid-insoluble residue ## Documents shipped with a lot ### Certificate of analysis Batch-specific results for identity, magnesium assay, glycine content, moisture, pH, particle size, heavy metals and microbiology, with the method named against each parameter. ### Technical data sheet Chemical form, hydrate state, CAS number, specification ranges, solubility, bulk density, recommended storage and the grades available for the same ingredient. ### Safety data sheet A 16-section SDS issued against the exact grade supplied, in the format your EHS team already files. ### Allergen, GMO and origin statements Declarations covering the major allergen list, gluten, animal-derived inputs, GMO status and the manufacturing site, signed for the batch. ### Residual solvent and contaminant statements The solvent system used in crystallisation, plus heavy-metal and microbiological results against the destination-market limits. ### Specification comparison A line-by-line comparison of our specification against the one you sent, including where we cannot match and why. ## Technical documents ### 01 What the COA for magnesium bisglycinate actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-bisglycinate/coa/ Reviewed: 2026-11-18 Every lot of magnesium bisglycinate ships with a certificate that reports the magnesium assay, the glycine content, the calculated Mg : glycine ratio, free glycine, moisture, pH, particle size and the contaminant panel. The parameter list is fixed; the results change from lot to lot. Anything your quality team needs beyond this list can usually be added as a separate test before the lot is released. In one lineA magnesium assay on its own cannot tell a chelate from a blend. The certificate has to report the ligand, the ratio and the form alongside the metal. ## The one-page sheet The certificate is built around the release specification, not around a catalogue description. Each line names the method, the release limit and the result for the lot. A result without a method is a number without a meaning. Batch COA · magnesium bisglycinate, 14% grade | Parameter | Method | Release limit | Appearance | Visual | White to off-white crystalline powder | Magnesium (Mg) | Complexometric EDTA titration | 13.5–14.2% | Glycine | HPLC | 84.0–88.0% | Mg : glycine ratio | Calculated from the two assays | 1.95–2.05 mol glycine per mol Mg | Free glycine | HPLC | ≤1.0% | Loss on drying | USP <731> | ≤2.0% | pH (5% suspension) | Potentiometry | 8.5–11.5 | Particle size | Sieve analysis | ≥95% through 40 mesh | Bulk density | Tapped cylinder | 0.55–0.90 g/mL | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg Microbiology is reported on the same certificate as a second block: aerobic plate count, yeast and mould, E. coli and Salmonella. The limits are agreed in the specification, not chosen after the result is known. ## What “14%” is measured against Two percentages are routinely confused in this trade: the purity of the powder and the elemental magnesium content. A supplier may describe the material as “98%” or “99%” pure while the elemental magnesium is about 14%. The two figures answer different questions. The anhydrous chelate has the formula Mg(C₂H₄NO₂)₂ and a molar mass of about 172.4 g/mol. Magnesium contributes 24.3 g/mol, or 13.9% of the molecule; glycine contributes the remaining 86.1%. A specification of 13.5–14.2% magnesium is therefore a statement about the chelate itself, not a purity claim. The hydrate state changes the arithmetic. The monohydrate carries about 12.6% magnesium and the dihydrate about 11.8%. A certificate that reports 11.9% magnesium may describe the same chemical entity as a 14% certificate, but it describes a different drum. This is why the specification has to name the hydrate state, and why the loss-on-drying figure belongs next to the assay. ## Release limit versus batch result A release limit is the range the lot must fall inside. A batch result is what the laboratory measured. The certificate should show both, and it should show the method beside each. “Passes specification” on its own is not a result; it is a conclusion without the evidence. Some parameters are reported rather than limited. Free glycine, for example, may be reported at 0.4% on one lot and 0.8% on another without either lot failing. The buyer still needs the figure, because free glycine is the part of the ligand that did not react. A specification that sets a limit on total glycine but never reports free glycine can be met by adding glycine to the blender. The same logic applies to the Mg : glycine ratio. The ratio is calculated from two measured values, so its uncertainty is the uncertainty of both assays. It is a useful identity check, not a substitute for the individual figures. ## What changes between batches The magnesium assay follows the chelation and crystallisation steps; the glycine assay follows the same reaction from the ligand side. The ratio should stay close to 1:2 if the material is the chelate. Loss on drying follows the drying step and the hydrate form. pH follows the residual alkalinity of the crystallisation liquor. Particle size follows milling and sieving; bulk density follows particle shape and moisture. Colour is the least quantitative signal and often the most useful. A cream or tan tint can indicate a drying step that ran hot, a trace of iron, or a Maillard reaction with a reducing sugar. The assay can still pass. The tint is a reason to ask for the batch record, not a reason to reject the lot by itself. ## When to order third-party testing Order an outside test when the material is from a new source, when the first shipment is about to enter a regulated market, or when the label makes a form claim that the certificate does not prove. The useful panel is not a repeat of the supplier's assay. It is the set of tests that answer the question the supplier's certificate leaves open: X-ray diffraction for crystalline magnesium oxide, FTIR for the coordination of the chelate, and ICP-MS for the contaminant panel on the same sample. A second laboratory is also the right way to settle a dispute. Send the retained sample, the supplier's COA and the specification, and ask for the three tests that distinguish the form, not for a full repeat of the certificate. ## What to compare between suppliers Put six lines side by side before comparing price: the chemical form and hydrate state, the magnesium assay and its method, the glycine assay, the Mg : glycine ratio, free glycine, and the presence or absence of an XRD oxide screen. If two quotations agree on the magnesium figure but disagree on the other five, they are not quoting the same material. The batch record is the second layer: who manufactured the lot, which magnesium source was used, which drying step was applied, and what the retained sample is. A certificate can be accurate and still describe a lot that is not the lot you will receive. The lot number on the COA, the lot number on the drum and the lot number on the retained sample should be the same number. For the specification behind this page, see the magnesium bisglycinate product page. The grade logic is on the grade comparison page, and the tests that separate a chelate from a blend are on the identity page. The release workflow is described on the quality page. ### 02 14%, 11%, buffered or granulated: choosing a magnesium bisglycinate grade URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-bisglycinate/grades/ Reviewed: 2026-11-18 Magnesium bisglycinate is sold in several grades that share a name but not a composition: the anhydrous chelate at about 14% elemental magnesium, the monohydrate and dihydrate at lower figures, buffered blends that add magnesium oxide, and milled or granulated versions of the same chemistry. The grade is chosen by the dosage form and the label claim, not by the highest number on the first quotation. In one lineThe grade is decided by the dosage form and the label, not by the magnesium percentage on the first quote. ## Why the grade is not the assay Two powders can both be called magnesium glycinate and still differ in three ways that matter to a formulator: the hydrate state, the amount of unreacted magnesium oxide, and the particle size. The elemental magnesium figure is the sum of those differences, but it does not explain them. This is why a quotation that leads with a percentage is incomplete. The useful question is not “how much magnesium” but “which molecule, in which hydrate, with what else in the drum”. The answer decides the label, the fill weight, the flow on the tablet press and the taste of the finished product. ## The grades side by side Magnesium bisglycinate grades · what changes | Grade | Elemental Mg | Form | Fits | Watch | Anhydrous chelate | about 14.1% | Mg(C₂H₄NO₂)₂ | Capsules, tablets, powder blends | Hygroscopic; confirm LOD and packing | Monohydrate | about 12.6% | Chelate with one water | General powder blends | More mass per mg of magnesium | Dihydrate | about 11.8% | Chelate with two waters | Blends where flow matters | Hydrate state must be on the label | Buffered blend | varies, often above 14% | Chelate plus magnesium oxide or carbonate | Cost-driven projects | Not the same label ingredient | Granulated | same as base grade | Agglomerated powder | Tablets, sachets | Confirm granulation aids | Milled, 80 mesh | same as base grade | Finer powder | Capsules, suspensions | Dust, flow, blend segregation ## What changes in the drum The anhydrous chelate carries the most magnesium per kilogram, which is why it is the reference grade for capsule and tablet formulas with a tight fill weight. The hydrates carry less magnesium per kilogram and more water, so a formula that was built on 14% needs a new fill weight if the grade changes. The change is arithmetic, not a quality difference, but it has to be made deliberately. A blend that adds magnesium oxide raises the elemental magnesium above what the pure chelate can carry. The anhydrous chelate cannot exceed about 14.1% magnesium by mass; a figure of 18% or 20% is therefore a signal to ask what else is in the drum. That is not automatically a bad material, but it is a different material, and the label has to say so. Granulation changes flow and dust, not the chemistry. Milling changes particle size and dissolution rate, not the assay. Both are legitimate ways to fit a dosage form, provided the specification names the process and the excipients used. ## What changes in the finished product For capsules, the constraint is fill weight. A 100 mg elemental magnesium dose needs about 710 mg of a 14% chelate, before any excipient. The same dose needs about 790 mg of the monohydrate and about 850 mg of the dihydrate. In a 500 mg capsule, the grade decision is also a capsule-count decision. For tablets, bulk density and flow decide whether the blend runs on the press. A fine milled powder may need granulation; a granulated grade may need a different lubricant. For stick packs and drink mixes, dissolution rate and taste matter more than the last decimal of the assay. For gummies and chews, the pH and water activity of the matrix can change how the chelate behaves, and the taste of the magnesium salt becomes part of the product. None of these decisions is settled by the certificate alone. They are settled by a bench trial with the grade that will actually ship. ## When not to upgrade If the label claim is elemental magnesium, the formula has room for the extra mass, and the certificate documents the form, a hydrate grade can be the correct choice. Paying for a more concentrated grade only makes sense when the fill weight, the capsule size or the freight cost makes the concentration worth something. Likewise, a granulated grade is not an upgrade for a capsule formula that already flows well, and a finer mesh is not an upgrade for a tablet blend that needs density. The grade should solve a problem the dosage form actually has. ## What to put in the specification - “Magnesium bisglycinate, anhydrous, 13.5–14.2% Mg by complexometric titration.” - “Glycine 84.0–88.0% by HPLC; Mg : glycine ratio 1.95–2.05.” - “Free glycine ≤1.0%; loss on drying ≤2.0%.” - “Particle size ≥95% through 40 mesh; bulk density 0.55–0.90 g/mL.” - “No added magnesium oxide; XRD screen reported on request.” The grade table above is only useful if the certificate repeats the same definitions. A specification that names the form, the hydrate and the particle size gives the laboratory something to test against; a specification that names only the magnesium range does not. For the tests behind these figures, read the COA page. For the difference between a chelate and a buffered blend, read oxide versus bisglycinate. The regulatory status of the form is on the compliance page. ### 02.1 Magnesium oxide vs bisglycinate: what the blend hides URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-bisglycinate/grades/oxide-vs-glycinate/ Reviewed: 2026-11-18 Magnesium oxide carries about 60% elemental magnesium; magnesium bisglycinate carries about 14%. A blend of the two can hit almost any figure in between, including the 20% figure some suppliers quote as “magnesium glycinate”. The magnesium assay cannot tell the two sources apart, which is why a form claim needs a test that looks at the ligand as well as the metal. In one lineMagnesium oxide carries about 60% magnesium; the bisglycinate carries about 14%. A blend can hit any number in between and still be called magnesium glycinate. ## Two numbers, two materials Magnesium oxide, MgO, is 60.3% magnesium by mass. Magnesium bisglycinate, Mg(C₂H₄NO₂)₂, is 13.9% magnesium. The difference is not a matter of grade or purity; it is the difference between an inorganic oxide and an organic chelate. This has a practical consequence for reading a quotation. An anhydrous bisglycinate cannot exceed about 14.1% magnesium. A certificate that reports 18%, 20% or 22% magnesium is therefore describing something else: a blend with oxide or carbonate, a different salt, or a material with a carrier that has been counted in the assay. None of those is automatically unsafe, but none of them is the chelate the label may imply. ## Why blends exist Blending is a commercial answer to three pressures. Magnesium oxide is inexpensive per kilogram of magnesium, so a blend lowers the cost of a “magnesium glycinate” position. Oxide also raises the elemental magnesium figure, which looks better on a short specification. And oxide is a fine, dense powder that can improve flow in a blend that would otherwise be light and cohesive. The result can be a legitimate product. A formulator who wants a high-magnesium, low-cost powder may choose a blend deliberately. The problem is not the blend; the problem is calling it the chelate when the buyer is paying for the chelate and the label names only the chelate. ## How a blend is detected The first check is arithmetic. If the magnesium figure is above the theoretical maximum of the anhydrous chelate, the material contains another magnesium source. The second check is the ligand. The chelate has a fixed Mg : glycine molar ratio of 1:2; if the glycine figure is low relative to the magnesium, part of the magnesium is not chelated. The third check is crystallography. X-ray diffraction detects crystalline magnesium oxide in the powder. The detection limit depends on the method and the laboratory, so the report should state it. The fourth check is FTIR, which shows the coordination of the glycine to the magnesium; a physical mixture of oxide and chelate does not produce the same spectrum as a reacted chelate. A solubility or acid-digestion check can support the picture but does not replace the spectroscopic evidence. Magnesium oxide is sparingly soluble in water; a cloudy dispersion is a hint, not a proof. The proof is the combination of the elemental assay, the ligand assay and a method that sees the crystal form. ## What the label can say In the European Union, the ingredient list has to name the magnesium source as listed in Annex II of Directive 2002/46/EC. Magnesium bisglycinate and magnesium oxide are separate entries. A blend has to declare both, in descending order by weight. A label that names only magnesium bisglycinate while the drum contains oxide is a labelling problem before it is a quality problem. In the United States, the Supplement Facts panel declares elemental magnesium, and the ingredient list names the source. A blend should name both sources. The elemental figure alone does not tell the consumer or the retailer which form was used. The same logic applies to the specification. If the purchase order says “magnesium bisglycinate”, the certificate should prove the chelate. If the purchase order says “magnesium blend”, the certificate should name the components and their proportions. A purchase order that says only “magnesium 20%” has not specified a material. ## What to write into the specification - “Magnesium bisglycinate, 1:2 chelate; no added magnesium oxide.” - “Magnesium 13.5–14.2%; glycine 84.0–88.0%; Mg : glycine 1.95–2.05.” - “Free glycine ≤1.0%.” - “XRD: no crystalline magnesium oxide detected, detection limit reported.” - “If blended, declare each magnesium source and its contribution.” The specification should also say who is responsible for the blend declaration. If the material is blended after the chelate is manufactured, the blender is the manufacturer of the blend and the certificate should come from the blender, not from the chelate producer. ## Questions to put to a supplier - Is the material a single chelate or a blend? If a blend, what are the components and ratios? - What is the magnesium figure, and what is the glycine figure on the same lot? - Is there an XRD or FTIR report for this lot? - Which magnesium source was used in the reaction? - Does the certificate name the hydrate state? A supplier who can answer these five questions is selling a specification. A supplier who answers only the first one with a percentage is selling a number. The identity page explains the test sequence; the grade page explains where the blend sits in the range; the compliance page covers the labelling rules. ### 03 Magnesium bisglycinate is stable dry; the formula decides the shelf life URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-bisglycinate/stability/ Reviewed: 2026-11-18 Magnesium bisglycinate is a crystalline powder that stores well in a sealed pack. The risks appear when the powder picks up moisture, when it is dissolved into an alkaline solution, or when it is blended with a reducing sugar and heated. Shelf life is assigned from stability data for the grade and the pack, not from a generic claim about the molecule. In one lineThe powder is not the fragile part. Moisture, an alkaline solution and a reducing sugar in the blend are what change the material. ## The dry powder In the unopened pack the material is stable at ambient temperature. The chelate is a crystalline solid with a defined hydrate state, and the assay does not move on its own. The practical risk is moisture: an opened liner in a humid room will pick up water, which changes loss on drying, flow and, at the margin, the hydrate state. That is why loss on drying is a release parameter rather than a storage afterthought. Moisture pickup also changes bulk density and caking behaviour. A powder that flowed well on the tablet press in the trial can bridge in the hopper after a humid weekend. The fix is a sealed liner, a desiccant where the climate requires it, and a packing specification that names the liner rather than only the drum. ## In solution A 5% suspension of the chelate is alkaline, with a pH in the range of 8.5 to 11.5. That alkalinity is part of the material's behaviour and has to be designed around. An acidic beverage will shift the pH and can change the solubility and taste of the magnesium; a neutral or alkaline beverage can support microbial growth if it is not preserved. Heat accelerates the reaction between glycine and any reducing sugar in the matrix. It also increases the rate at which the chelate can exchange ligands with other minerals in the formula. Neither reaction is visible on the assay immediately; both show up in colour, taste or stability later. A bench trial at the intended pH and process temperature is more useful than a room-temperature solubility test. ## What actually moves the result Stability factors · magnesium bisglycinate | Factor | Effect | Control | Moisture | Loss on drying, caking, flow | Sealed liner, desiccant, dry room | Heat | Maillard browning with reducing sugars | Lower process temperature, dry blend | pH above 9 | Alkaline taste, ligand exchange | Buffer the matrix, trial the pH | Reducing sugars | Browning, off-flavour, glycine loss | Use non-reducing carriers, control water activity | Trace metals | Colour, chelate exchange | Specify iron and copper limits | Light | Limited direct effect on the powder | Opaque pack for retail formats ## The test protocol A bulk stability study places the powder in the commercial pack at 25 °C/60% RH and 40 °C/75% RH, with pull points at 0, 1, 3, 6, 12 and 24 months. At each point the laboratory tests magnesium, glycine, loss on drying, pH, appearance and microbiology. The 40 °C condition is a stress condition, not a storage recommendation; it is there to reveal a trend within the study window. An in-matrix study is separate. The finished blend or dosage form is stored at 30 °C/65% RH and 40 °C/75% RH, and tested for assay, moisture, colour, taste and, where relevant, dissolution. The matrix can fail while the bulk powder passes; that is the result the buyer needs. ## Formulation and packaging In a capsule or tablet, the powder is protected by the dosage form and the main risks are moisture and the excipients. A direct-compression blend with a reducing sugar carrier needs a lower process temperature and a water-activity check. A granulated grade may need a different lubricant because the granulation changes the surface. In a stick pack or drink mix, the pack is the protection. A foil laminate with a sealed seam and a low moisture-vapour transmission rate is the baseline. A clear or paper pack is a retail choice, not a stability choice, and it should be supported by data. In a gummy or chew, pH, water activity and the sugar system decide the result. Glycine is a Maillard partner; a glucose syrup or a reducing-sugar carrier plus heat will brown the batch. A non-reducing system or a lower process temperature is the first control, before any antioxidant is considered. In a beverage, the pH and the preservative system matter more than the powder grade. A clear drink needs a soluble grade and a pH that keeps the chelate in solution; a cloudy drink can tolerate a dispersion but not a sediment. ## How shelf life is assigned Shelf life is assigned from the stability data for the grade and the pack, not from a default number. The technical data sheet states the storage condition and the retest or expiry period that the data support. A retest period is appropriate for a bulk ingredient that is re-tested before use; an expiry date is appropriate for a consumer pack. If the data do not cover the pack or the matrix, the honest answer is a shorter period or a new study, not a longer claim. The COA page shows the parameters that are followed over time; the ordering page shows the packs the study has to cover; the quality page describes how the data are kept. ### 04 Magnesium bisglycinate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-bisglycinate/moq/ Reviewed: 2026-11-18 Magnesium bisglycinate starts at one kilogram, packed from a released lot with that lot's certificate. The 25 kg fiber drum is the bulk pack; the 1 kg foil pouch is the qualification pack. Lead time is counted from release and order confirmation, not from the first email, and the quotation is built from the grade, the quantity and the destination market. In one lineOne kilogram from a released lot, with the COA of that lot. The quotation is built from grade, quantity and destination. For the specification behind the pack, see the magnesium bisglycinate hub and the methods library. ## Why the minimum is one kilogram A first order should qualify the material, not fill a warehouse. One kilogram is enough for a bench trial, a stability pilot and a small capsule or tablet run, and it is drawn from a released lot rather than from a sample cabinet. The buyer can test the same material that will ship at scale, with the certificate for that lot. The minimum is not a discount threshold. It is the smallest quantity we can pack, label and document without creating a lot that exists only for a sample. Larger quantities are packed from the same released lot where the lot size allows, and from a new lot when it does not; the certificate follows the lot. ## Packaging Standard packs · magnesium bisglycinate | Pack | Use | Notes | 1 kg foil pouch | Trial, sample, small batch | Food-grade liner, sealed, labelled with lot | 25 kg fiber drum | Production | Food-grade liner, tamper-evident seal | Pallet | Bulk shipment | Stretch-wrapped, lot labels visible The liner is part of the pack, not an accessory. A drum without a sealed food-grade liner is a different storage condition. If the destination climate is humid, say so in the order and the packing specification can include a desiccant. ## Lead time Indicative lead time is one to seven days after specification and order confirmation. The clock starts when the grade, the quantity, the packing and the documents are agreed, not when the inquiry arrives. A custom particle size, a granulation run or a third-party test adds time, and the quotation states the added time separately. The usual causes of delay are a specification that changes after the order, a document requirement that was not in the first brief, and a destination restriction that needs a licence or a test. Naming those three in the first email is the fastest way to shorten the lead time. ## What the quotation needs - The chemical form and hydrate state, or the specification you are matching. - The quantity for the first order and the expected annual volume. - The dosage form: capsule, tablet, stick pack, gummy or beverage. - The destination country and the document pack required there. - The particle size and bulk density your process needs. - Any deadline or launch date the shipment has to meet. If you have a competitor's COA, send it. It is often a faster way to start than a written specification, because it shows the method and the limits you are used to. We reply with a counter-specification that says what we can match and what we cannot. ## Samples Samples are typically 100–500 g and are sent with the COA of the lot they were drawn from, usually within three to five business days after the specification is agreed. A sample without its COA is a demonstration, not a qualification; the two should travel together. Sample freight is quoted with the sample. The sample is not a free pass on the specification: if the trial needs a different particle size or a granulated grade, the sample should be of that grade, not of the catalog grade. ## Payment and terms Payment terms, Incoterm and the documentary requirements are quoted with the order. They depend on the destination, the value and whether the buyer is new to us. The quotation states them in writing; the website does not publish them because they are not the same for every order. Returns and claims are reviewed against the retained sample and the certificate for the lot. Report damage or a discrepancy on receipt, with photographs of the pack and the lot label, so the claim can be matched to the lot record. The COA page explains what the certificate contains; the quality page explains how the lot record is kept. ### 05 Where magnesium bisglycinate is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-bisglycinate/compliance/ Reviewed: 2026-11-18 Four questions decide whether a magnesium bisglycinate lot can be sold into a market: whether the form is permitted, whether the contaminants are inside the limit, whether the label names the form correctly, and whether the claims made for it are authorised. The answers differ by market, and a page that answers only one of them is not a compliance page. In one lineThe permitted form, the contaminant limit and the label rule are three different questions, and each has a different answer by market. ## The four checks The first check is the permitted-form list. The European Union publishes a list of vitamin and mineral substances that may be used in food supplements; the United States approaches the same question through the dietary-ingredient provisions of DSHEA; the United Kingdom keeps a retained version of the EU list. A form that is permitted in one market is not automatically permitted in another. The second check is the contaminant limit. Lead, cadmium, mercury and arsenic are the usual panel, but the legal basis and the numeric limit differ. The third check is the label: the ingredient must be named in the form the law expects, and the elemental magnesium must be declared in the required way. The fourth check is the claim: an authorised health claim, a structure/function statement and a therapeutic claim are three different categories with three different rules. ## European Union Magnesium bisglycinate is listed in Annex II of Directive 2002/46/EC, the list of vitamin and mineral substances that may be used in the manufacture of food supplements. The listing is the first gate, not the whole answer. The Member State notification procedure, the contaminant limits in Regulation (EU) 2023/915 and the labelling rules in Regulation (EU) No 1169/2011 all apply on top of it. The contaminant limits for food supplements are set per kilogram of the product as sold. Lead is limited to 3.0 mg/kg, cadmium to 1.0 mg/kg and mercury to 0.10 mg/kg; arsenic is not harmonised at EU level, so a Member State may apply its own limit. The full table is on the EU compliance page. ## United States In the United States, magnesium bisglycinate is sold as a dietary ingredient under DSHEA. The exact form has to be a lawful dietary ingredient: it may be grandfathered, it may be the subject of a GRAS conclusion for the intended use, or it may require a new dietary ingredient notification. The basis should be documented by the supplier, not assumed from the fact that magnesium is an essential nutrient. There is no USP monograph for magnesium bisglycinate, so a “USP-grade” claim needs a specific reference and a batch declaration; the absence of a monograph is not a defect, but it means the specification is the buyer's own. The Supplement Facts panel declares elemental magnesium against the Daily Value of 420 mg for adults and children four years and older. The full label and claims position is on the US compliance page. ## The contaminant table Contaminant limits · food supplements, by market | Element | EU | US | UK | Lead | 3.0 mg/kg | No federal limit specific to supplements; state rules apply | Retained EU limit, checked against UK law | Cadmium | 1.0 mg/kg | No federal limit specific to supplements | Retained EU limit | Mercury | 0.10 mg/kg | No federal limit specific to supplements | Retained EU limit | Arsenic | Not harmonised; Member State rules may apply | No federal limit specific to supplements | Checked against UK law The table is a starting point, not legal advice. California Proposition 65 sets a maximum allowable dose level of 0.5 µg/day for lead (reproductive toxicity) and a no-significant-risk level of 15 µg/day (cancer), so a product that is inside the EU limit can still trigger a California warning at a low daily dose. The destination and the dose have to be checked together. ## Claims In the EU, magnesium claims are authorised in Regulation (EU) No 432/2012 and may be used only under the conditions attached to each claim. The claims describe a contribution to normal function; they are not disease claims. In the US, a structure/function statement is the brand's responsibility, must be truthful and substantiated, and must carry the DSHEA disclaimer. Neither market allows a therapeutic or disease-related claim for the ingredient. This site does not make either kind of claim. It publishes the specification and the regulatory framework; the claim belongs to the brand that puts it on the label and to the market that authorises it. ## The document pack - Batch COA with the magnesium, glycine, moisture and contaminant results. - Specification and technical data sheet naming the form and hydrate state. - Safety data sheet in the 16-section format. - Allergen, GMO, origin and residual-solvent statements. - Statement of the legal basis for the dietary-ingredient status in the US, where applicable. - Certificate of analysis from a third-party laboratory, where the buyer's review requires one. ## What to check before the first order - Is the exact form permitted in the destination market, and is the hydrate state named? - Do the contaminant results cover the destination limit and the daily dose? - Does the label name every magnesium source in the drum? - Is the claim authorised, or is it a structure/function statement with the required disclaimer? - Does the supplier's document pack include the legal basis for the ingredient status? The EU page and the US page expand the two markets this site ships to most often. The quality page describes how the batch file is assembled. ### 05.1 Magnesium bisglycinate in the EU: permitted form, limits and label URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-bisglycinate/compliance/eu/ Reviewed: 2026-11-18 Magnesium bisglycinate is on the EU list of permitted magnesium sources for food supplements, but the listing is only the first of four checks. The Member State notification, the contaminant limits in Regulation (EU) 2023/915, the labelling rules and the authorised-claims list all apply to the finished product. In one lineMagnesium bisglycinate is on the EU list of permitted magnesium sources for food supplements, but the list is only the first of four checks. ## The permitted-form status Directive 2002/46/EC harmonises the vitamin and mineral substances that may be used in food supplements. Annex II lists the permitted forms; magnesium bisglycinate is one of the listed magnesium sources. The listing is about the form, not about a specific supplier, and it does not certify a batch. Several Member States also require a notification of the product before it is placed on the market. The procedure and the information required differ by country. The notification is the brand's obligation, not the ingredient supplier's, but the supplier's specification and label information are usually part of the file. ## Contaminant limits EU contaminant limits · food supplements | Element | Limit | Basis | Lead | 3.0 mg/kg | Regulation (EU) 2023/915 | Cadmium | 1.0 mg/kg | Regulation (EU) 2023/915 | Mercury | 0.10 mg/kg | Regulation (EU) 2023/915 | Arsenic | Not harmonised | Member State rules may apply The limits apply to the food supplement as sold, not to the drum. A magnesium ingredient that is compliant at 14% magnesium can still produce a finished product above the lead limit if the daily dose and the other ingredients add to the total. The calculation has to be done on the finished product and the daily portion. ## Labelling The ingredient list must name the magnesium source as it appears in Annex II. The nutrition declaration must state the amount of magnesium per portion and as a percentage of the reference intake. The EU reference intake for magnesium is 375 mg per day; the percentage is calculated against that figure. The product must be labelled as a food supplement, with the recommended daily portion and a warning not to exceed it. If the product contains more than one magnesium source, each source is named in the ingredient list in descending order by weight. A blend of bisglycinate and oxide cannot be labelled as bisglycinate alone. The oxide versus bisglycinate page explains the blend question. ## Health claims Magnesium claims are authorised in Regulation (EU) No 432/2012. The regulation lists the permitted wording and the conditions of use; a claim that is not on the list cannot be used, and a claim that is on the list can only be used if its conditions are met. The authorised claims describe a contribution to normal function, not the treatment or prevention of a disease. The claim is made by the brand, on the finished product, against the daily portion. The ingredient supplier's role is to provide the specification and the batch data that support the calculation. This site does not reproduce the claim wording as a marketing statement; it names the regulation so the brand's regulatory team can check the current text. ## Documents to keep - Batch COA with magnesium, glycine, moisture and contaminant results. - Specification and TDS naming the form and hydrate state. - SDS, allergen and GMO statements, and the origin record. - Residual-solvent statement for the crystallisation system. - Statement of the Annex II entry and the Member State notification, where the brand holds it. ## What to confirm with the importer - Which Member State will be notified, and who holds the notification. - Whether the finished product's daily portion stays inside the contaminant limits. - Which authorised claim wording will be used, and whether its conditions are met. - Whether the label names every magnesium source in the product. - Whether the importer requires a third-party contaminant report on the lot. Keep the label file and the batch file together. A reviewer who asks why the product is on the market will want the Annex II entry, the Member State notification, the nutrition declaration and the batch COA in one place. If one of the four is missing, the product may still be lawful but the file is incomplete, and an incomplete file is what turns a routine review into a delay. The market-level framework is on the compliance page; the US position is on the US page; the batch documents are described on the quality page. ### 05.2 Magnesium bisglycinate in the US: ingredient, label and claims URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-bisglycinate/compliance/us/ Reviewed: 2026-11-18 In the United States, magnesium bisglycinate is sold as a dietary ingredient, not as an approved drug or a food additive. The ingredient question is whether the exact form is lawful under DSHEA; the label and the claim are separate reviews. There is no USP monograph for the substance, so the specification has to be the buyer's own. In one lineIn the US the ingredient question is whether the form is a lawful dietary ingredient; the label and the claim are separate reviews. ## Dietary ingredient status DSHEA defines a dietary ingredient to include vitamins, minerals, amino acids and other substances used to supplement the diet. Magnesium is an essential mineral, but the exact form still has to be a lawful dietary ingredient. The usual bases are that the form was marketed before 15 October 1994, that it is the subject of a GRAS conclusion for the intended use, or that a new dietary ingredient notification has been submitted and reviewed. The supplier should be able to state which basis applies to the exact form and provide the supporting document. “Magnesium is a mineral” is not a sufficient answer, because the form is the ingredient. If the material is a blend, each magnesium source needs its own basis. ## The Supplement Facts panel The panel declares elemental magnesium, not the weight of the chelate. The Daily Value for magnesium is 420 mg for adults and children four years and older. The panel shows the amount per serving and the percentage of the Daily Value, and the ingredient list names the source. If the product contains more than one magnesium source, each is named. The “other ingredients” list is part of the label. A carrier, an anti-caking agent or a granulation aid belongs there. A blend that adds magnesium oxide is not an “other ingredient” in the same sense; it is a second magnesium source and has to be declared as one. ## Structure/function claims A structure/function claim describes the role of a nutrient in normal function. It must be truthful, not misleading and substantiated, and it must carry the DSHEA disclaimer, which states that the statement has not been evaluated by the FDA and that the product is not intended for any disease indication. The brand must notify FDA of the claim within 30 days of marketing. A disease-related claim is a drug claim. It is outside the dietary-supplement framework, regardless of the ingredient. The ingredient supplier does not make the claim; the brand does, and the brand carries the substantiation file. ## Contaminants and state rules There is no federal maximum level for lead in dietary supplements as such. FDA can act on a product that is adulterated or unsafe, and compendial standards such as USP <2232> set elemental-impurity limits for products that follow USP. State law can be stricter: California Proposition 65 sets a maximum allowable dose level of 0.5 µg/day for lead (reproductive toxicity) and a no-significant-risk level of 15 µg/day (cancer). The practical consequence is that a lot can meet the EU limit and still need a California warning at a low daily dose. The destination state, the daily portion and the other ingredients have to be checked together. ## Documents to keep - Batch COA with magnesium, glycine, moisture and contaminant results. - Specification and TDS naming the form and hydrate state. - Statement of the dietary-ingredient basis: grandfathered, GRAS or NDI. - SDS, allergen, GMO and origin statements. - Residual-solvent statement and, where applicable, a cGMP certificate for the manufacturing site. - Third-party contaminant report where the brand's review requires one. ## What to confirm with the importer - Which dietary-ingredient basis applies to the exact form, and who holds the document. - Whether the finished product's daily portion triggers a state warning. - Whether the label names every magnesium source. - Whether the claim is a structure/function claim with the disclaimer, or an unauthorised disease claim. - Whether the brand's cGMP audit requires a supplier qualification file. Keep the dietary-ingredient basis, the Supplement Facts panel and the claim substantiation file together. A retailer reviewing the product may ask for all three, and the ingredient supplier's document pack supports only the first. The brand owns the other two, and the brand is the party that answers for the label. The market-level framework is on the compliance page; the EU position is on the EU page; the identity tests are on the identity page. ### 06 How we prove a magnesium bisglycinate lot is the chelate, not a blend URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-bisglycinate/identity/ Reviewed: 2026-11-18 Identity for magnesium bisglycinate is not a single test. It is a set of four answers: the chemical form, the ligand ratio, the crystal form and the absence of undeclared material. A magnesium assay answers only the first part of the first question, and a certificate that stops there cannot distinguish a chelate from a blend. In one lineIdentity here is the form and the ratio: the same magnesium number can come from a chelate, a blend or a hydrate. ## The four layers The first layer is the chemical form: a 1:2 magnesium–glycine chelate, not magnesium oxide, carbonate or citrate. The second is the ligand ratio: one magnesium per two glycine molecules, measured on the same lot. The third is the crystal form and hydrate state, which decide how much elemental magnesium the powder can carry. The fourth is the absence of undeclared material: a carrier, a second magnesium source or a residual solvent that the certificate does not mention. Each layer needs its own method. A single assay cannot cover all four, and a supplier who offers only the magnesium figure has answered one quarter of the question. ## The ratio is the most economical check The anhydrous chelate is 13.9% magnesium and 86.1% glycine by mass. On a lot that is the pure chelate, the two assays should produce a molar ratio close to 1:2. If the magnesium is high and the glycine is low, part of the magnesium is coming from another source. If the glycine is high and the magnesium is low, the material may contain added glycine or a carrier. The ratio is calculated, not measured directly. Its uncertainty is the sum of the two assay uncertainties, so the specification should give a range rather than a single figure. A range of 1.95–2.05 mol glycine per mol magnesium is tight enough to catch a blend and wide enough to allow normal analytical variation. ## Crystallography and spectroscopy Identity tests · what each one can and cannot prove | Test | Proves | Does not prove | Complexometric EDTA titration | Total magnesium | Which source the magnesium came from | HPLC for glycine | Total glycine | Whether the glycine is bound or free | Calculated Mg : glycine ratio | Consistency with a 1:2 chelate | Absence of a second magnesium source by itself | X-ray diffraction | Crystalline magnesium oxide, if present above the detection limit | Amorphous or dissolved species | FTIR | Coordination of glycine to magnesium | Quantitative blend proportions | Loss on drying / TGA | Water content and hydrate behaviour | Which hydrate if the sample is mixed X-ray diffraction is the most direct test for crystalline magnesium oxide. The detection limit depends on the instrument and the sample preparation, so the report should state it. A “not detected” result is only meaningful with that limit attached. FTIR adds the coordination evidence: a physical mixture of oxide and chelate does not show the same metal–ligand bands as a reacted chelate. ## The adulteration routes The first route is a blend with magnesium oxide. It raises the elemental magnesium, lowers the cost per kilogram of magnesium and can improve flow. The magnesium assay passes; the ligand ratio moves. The second route is a carbonate or hydroxide source, which also raises the magnesium and can leave a different pH and solubility profile. The third is added glycine: a blend can be pushed toward the expected glycine figure without adding chelate. The fourth is a hydrate substitution: the powder is the same chemical entity but carries less magnesium per kilogram than the label implies. Each route has a different signature. The blend moves the ratio and may show oxide by XRD. Added glycine raises free glycine without raising bound glycine. Hydrate substitution shows up in loss on drying and in the elemental assay together. This is why the specification needs all three figures, not only the magnesium. ## What to write into the specification - “Magnesium bisglycinate, 1:2 chelate; no added magnesium oxide.” - “Magnesium 13.5–14.2%; glycine 84.0–88.0%; Mg : glycine 1.95–2.05.” - “Free glycine ≤1.0%.” - “Loss on drying ≤2.0%; hydrate state stated on the certificate.” - “XRD: no crystalline magnesium oxide detected; detection limit reported.” ## Questions to put to a supplier - What is the glycine figure on this lot, and how was it measured? - What is the calculated Mg : glycine ratio? - Is there an XRD report, and what is its detection limit? - Is the hydrate state named on the certificate? - Does the lot contain any magnesium source other than the chelate? The COA page shows where these figures sit on the certificate; the grade page explains the hydrate arithmetic; the oxide versus bisglycinate page covers the blend route in detail. ### 01 What the COA for collagen peptides actually contains URL: https://nutrition.rainwoodbio.com/products/protein-collagen/collagen-peptides/coa/ Reviewed: 2026-11-18 A certificate for collagen peptides carries three figures that decide what the material is: the protein content with its nitrogen conversion factor, the hydroxyproline content, and the molecular weight distribution. Each figure is only meaningful beside its method and its basis. The catalogue specification sets the ranges; the batch COA confirms what the lot in the drum actually measured. In one lineA collagen certificate is complete only when the protein factor, the hydroxyproline result and the molecular weight distribution appear together, each with its method. ## The parameter list Collagen peptides have no single CAS number, because the material is a mixture of peptides rather than one molecule. The certificate is therefore built on the parameters that describe the mixture: how much protein it carries, how much of that protein is collagen, how large the peptides are, and what else is in the drum. The table below is the catalogue parameter list; the release limits are agreed in the specification and repeated on every lot. COA parameter list · collagen peptides, bovine hide type I | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Protein (dry basis) | Kjeldahl, N × 5.55 | ≥90.0% | Hydroxyproline | Colorimetric | 8.0–12.0% | Molecular weight | SEC-HPLC | ≥90% below 3,000 Da | Moisture | Loss on drying | ≤7.0% | Ash | Gravimetric, furnace | ≤2.0% | pH (10% solution) | Potentiometry | 5.0–7.0 | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and enrichment | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent The source is a parameter too, even though it produces no number. The species and the tissue belong on the certificate and in the specification, because bovine hide, bovine bone, porcine skin and fish skin are different label ingredients. The identity page covers how that declaration is supported. ## What the protein figure is measured against Kjeldahl measures nitrogen, not protein. The nitrogen result is multiplied by a conversion factor, and the factor is a convention rather than a measurement. Collagen is calculated with N × 5.55 because its nitrogen content is close to 18% of the protein mass. A general food protein is calculated with N × 6.25, which assumes 16% nitrogen. The same nitrogen result therefore produces two different protein figures. Because 6.25 is about 12% larger than 5.55, a lot that reads 90.0% under the collagen factor would read roughly 101% under the general factor. That second figure is not a richer material; it is the same powder with a different convention applied. A certificate that does not name the factor cannot be compared with one that does, and a specification that says only “protein ≥90%” leaves the arithmetic open. The basis matters as much as the factor. The catalogue figure is on a dry basis. At the 7.0% moisture limit, a 90.0% dry-basis figure corresponds to about 83.7% on an as-is basis. Both statements describe the same powder, but a label or a purchase order that mixes the two bases will be wrong by several percent before any analytical variation is counted. ## Catalogue range, release limit and lot result A release limit is the window the lot must fall inside. A lot result is what the laboratory measured on that lot. A useful certificate shows both, with the method beside each line. “Conforms to specification” on its own is a conclusion without the evidence behind it. Some parameters are reported rather than limited. The molecular weight distribution is the clearest case: the specification can require ≥90% of the mass below 3,000 Da, and the certificate can still report the measured distribution. A lot can meet the cut-off while sitting at the high end of it, and that difference shows up in solubility, in mouthfeel and in how the powder smells. The cut-off is a gate, not a description. The specification described on this page is a catalogue specification. It states what the material is expected to meet; the batch COA confirms the lot that actually ships. No page on this site reports a batch result, a batch number or a customer, and none should be read as one. ## What moves between lots The protein and hydroxyproline figures follow the raw material and the hydrolysis step. Hide trimmings differ in composition from lot to lot, and the hydrolysis time and temperature decide how far the chains are cut. A longer hydrolysis lowers the average molecular weight and can slightly change the nitrogen recovery. Filtration and concentration decide how much of the fine fraction survives; drying decides the moisture and the colour. Odour is the least quantitative signal and often the most useful. Collagen peptide powder can carry a faint broth or hide note that strengthens with moisture uptake and with storage temperature. The protein figure can still pass while the odour has moved outside what a flavoured beverage can mask. That is a reason to ask for the retained sample and the storage history, not a reason to reject the lot on the number alone. ## When to send a sample to an outside laboratory Order an independent test when the source is new, when the first commercial shipment is about to enter a regulated market, or when the label makes a statement the supplier's certificate does not prove. The useful panel is not a full repeat of the certificate. It is the set that answers the open question: hydroxyproline and the amino acid profile for collagen identity, SEC-HPLC for the molecular weight distribution, species-specific PCR for the declared source, and ICP-MS for the contaminant panel on the same sample. An outside laboratory is also the right way to settle a dispute. Send the retained sample, the supplier's certificate and the agreed specification, and ask for the specific tests that separate the possible explanations rather than for the whole panel again. The quality page describes how the batch file and the retained sample are kept together. ## What to compare between suppliers Put six lines side by side before looking at anything else: the protein figure with its nitrogen factor and its basis, the hydroxyproline figure, the molecular weight distribution including the method, the moisture and ash limits, the species and tissue, and the allergen statement. If two quotations agree on the protein percentage but disagree on the other five, they are not quoting the same material. The second layer is the record behind the certificate: which site made the lot, which raw material batch went in, which hydrolysis and drying conditions were applied, and what retained sample exists. A certificate can be accurate and still describe a lot other than the one that arrives. The lot number on the COA, on the drum and on the retained sample should be the same number. For the ranges themselves, see the collagen peptides product page. The grade decision is on the grade comparison page, the tests that prove collagen identity are on the identity page, and the definition of the certificate is in the COA glossary entry. ### 02 Bovine, fish or a different molecular weight: choosing a collagen peptide grade URL: https://nutrition.rainwoodbio.com/products/protein-collagen/collagen-peptides/grades/ Reviewed: 2026-11-18 Collagen peptides are sold under one name and several different materials. The species and the tissue, the molecular weight distribution, the protein and hydroxyproline figures, and the physical form all change with the grade, and each of them changes something in the finished product. The grade is chosen by the dosage form, the label wording and the allergen position, not by the protein percentage on the first quotation. In one lineThe grade is the species, the tissue and the molecular weight curve, not the protein percentage printed at the top of the quotation. ## Why one name covers several materials “Collagen peptides” describes a process rather than a fixed composition. Collagen from a hide, a bone, porcine skin or fish skin is hydrolysed until most of the protein is below a chosen molecular weight. The starting tissue and the degree of hydrolysis together decide the amino acid profile, the peptide size, the colour, the odour and the allergen status. Two powders that both pass a ≥90% protein specification can behave differently in the same beverage. This is why a grade comparison that lists only protein percentages is incomplete. The protein figure says how much nitrogenous material is in the drum; it does not say which tissue it came from, how large the peptides are, or whether the allergen declaration will change the label. ## The grades side by side Collagen peptide grades · what changes | Grade | Source | Peptide size | Fits | Watch | Bovine hide, type I | Bovine hide | ≥90% below 3,000 Da, catalogue range | Sticks, beverages, capsules | BSE/TSE file; odour | Bovine bone | Bovine bone | Agreed range, often wider | Cost-driven powder blends | Mineral content; source documentation | Porcine skin | Porcine skin | Agreed range | General powders and capsules | Religious and vegetarian positioning | Fish skin and scales | Fish | Agreed range, often finer | Clear beverages | Fish allergen declaration | Low molecular weight | Any source | Finer curve, agreed in the specification | High-concentration drinks | Odour, bitterness, yield | Granulated or agglomerated | Any source | Same as the base grade | Sachets, tablets, spoonable powders | Granulation aids; dispersion time The table describes the choices, not a recommendation. Each row is a separate specification, and the certificate for each has to repeat the same definitions. ## What changes in the drum Peptide size drives solubility and mouthfeel. A distribution weighted toward the smaller peptides dissolves faster and leaves less body in the mouth; a distribution with a larger fraction of longer chains gives more viscosity and a heavier mouthfeel at the same concentration. Neither is better in the abstract. A clear ready-to-drink beverage and a spoonable powder want different curves. Odour and colour follow the tissue and the drying step. Hide-derived material is usually the most neutral; bone-derived material can carry a stronger note; fish-derived material can carry a marine note that a fruit flavour does not always cover. A finer hydrolysis can increase the odour because more of the surface is exposed and more short peptides are present. If the marketing position depends on a clean taste, the sensory question belongs in the grade decision, not in the flavour brief. Granulation changes flow, dust and dispersion, not the chemistry. It is a legitimate way to fit a sachet line or a tablet press, provided the specification names the granulation aids and the certificate repeats the peptide distribution of the base material. ## What changes in the finished product For stick packs and drink mixes, the constraints are dissolution speed, taste and the fill weight at the target dose. A finer grade may dissolve faster but can foam; a granulated grade disperses cleanly but takes longer to wet out. For capsules, the constraint is bulk density and the number of capsules per dose. For tablets, flow and compressibility matter more than the last decimal of the assay, and a granulated grade is often the only way to run the blend. For gummies and chews, the peptide distribution and the moisture of the matrix interact. A powder that is fine and hygroscopic can make the chew sticky during processing. For a clear beverage, haze is the deciding test, and it is a function of the peptide curve and the pH of the matrix together, not of the protein figure alone. None of these decisions is settled by a certificate. They are settled by a bench trial with the grade that will actually ship, run at the concentration the label will use. ## What to put in the specification - “Hydrolysed collagen peptides, type I, bovine hide; species and tissue stated on the certificate.” - “Protein ≥90.0% dry basis, Kjeldahl with N × 5.55; factor and basis stated.” - “Hydroxyproline 8.0–12.0% by colorimetric method.” - “Molecular weight: ≥90% below 3,000 Da by SEC-HPLC; distribution reported, not only the cut-off.” - “Moisture ≤7.0%; ash ≤2.0%; pH (10% solution) 5.0–7.0.” - “Allergen statement naming the source; fish declared where fish material is used.” A specification that names the species, the tissue, the peptide distribution and the method gives the laboratory something to test against. One that names only the protein range does not. ## When a standard grade is enough If the product is a capsule or a flavoured powder where the collagen is one of several ingredients, the standard bovine hide grade is usually the right starting point. It is the grade with the most documentation behind it, and its neutral odour is easier to work with. Moving to a finer grade only makes sense when the format actually needs faster dissolution or a clearer solution. Equally, a granulated grade is not an upgrade for a blend that already flows, and a fish grade is not an upgrade for a formula that does not need a fish source. The fish source brings an allergen declaration with it, and that declaration changes the label and the market access. The grade should solve a problem the product actually has. For the numbers behind these choices, read the COA page. The species decision is set out on fish versus bovine collagen peptides, and the regulatory position of each source is on the compliance page. The full range is listed on the product page. ### 03 Collagen peptides are stable dry; moisture and odour decide the shelf life URL: https://nutrition.rainwoodbio.com/products/protein-collagen/collagen-peptides/stability/ Reviewed: 2026-11-18 Collagen peptides are a dry powder, and in the dry state the protein itself is not the part that fails. Moisture uptake, caking, colour development and odour are what move first, and all four are decided by the pack and the storage condition rather than by the peptide. A stability programme for this material is therefore a study of water and aroma, not of protein breakdown. In one lineDry collagen peptides age through moisture and odour, not through protein loss, so the pack and the storage condition set the shelf life. ## The dry powder Hydrolysed collagen is hygroscopic. The powder picks up water from the air, and the water does two things. It plasticises the particle surface, which lets the powder bridge into lumps under its own weight; and it raises the water activity enough for colour and odour reactions to run. A drum that has been opened in a humid room and closed again can cake within days, while the protein and hydroxyproline figures are unchanged. The moisture limit on the certificate, ≤7.0%, describes the material at release. It does not describe the material after three months in a warehouse. The relevant number for shelf-life work is the water activity in the pack over time, and that depends on the barrier of the pack and on the humidity of the store. ## In solution In a beverage or a gel, the peptide is exposed to water, heat and pH for the life of the product. The peptide bonds themselves are reasonably stable in a food matrix at ambient temperature, so the protein figure does not usually fall first. What changes is the appearance and the aroma: solutions darken, take on a cooked or broth-like note, and can develop haze as the longer chains aggregate. Heat is the main accelerator. A beverage that is pasteurised or hot-filled sees more change in one pass than in months of ambient storage. The pH of the matrix matters as well: a low-pH drink and a neutral drink do not age the same way, and the same powder can be clear in one and hazy in the other because haze is a function of the peptide curve and the matrix together. Microbiological stability in solution is a separate question. The powder is specified at APC ≤1,000 cfu/g and with E. coli and Salmonella absent, but a reconstituted drink is a water-based food and needs its own preservation, thermal process or water-activity control. The certificate of the powder does not carry over to the drink. ## What actually moves the result Four factors decide how fast a lot changes: the water activity at packing, the oxygen and moisture barrier of the pack, the storage temperature, and the presence of reducing sugars in the matrix. Temperature has the largest effect on colour; moisture has the largest effect on caking and on odour; reducing sugars drive the browning reaction that shows up first as a cream or tan tint, then as a taste change. Light matters less for the powder and more for the reconstituted drink, especially where a colour or a vitamin is also present. Metal ions matter at trace level: a small amount of iron can catalyse colour development in a moist powder. This is why the ash limit and the heavy-metal panel belong next to the moisture limit rather than on a separate page of the file. ## The test protocol Stability protocol · what each condition answers | Condition | Duration | What it tests | 25 °C / 60% RH | Long-term | Shelf life at the stated storage condition | 30 °C / 65% RH | Intermediate | Behaviour in a warm, humid market | 40 °C / 75% RH | Accelerated | Moisture uptake, caking, colour, odour | Open-pack humidity challenge | Short term | In-use behaviour after the pack is opened | Matrix trial at target pH | Product shelf life | Haze, colour and aroma in the finished drink The powder is tested in the pack it will ship in, not in a laboratory jar. Samples are pulled at the start, at the mid-point and at the end, and each pull is tested for moisture, water activity, appearance, odour and solubility. Protein and hydroxyproline are measured at the start and the end as a check that the material has not changed identity, not as the primary failure criterion. ## Formulation and packaging The 1 kg foil pouch and the 25 kg fiber drum are not interchangeable for stability purposes. The pouch is the bench and pilot pack; its barrier is good but its headspace-to-product ratio is high, so an opened pouch exchanges air quickly. The drum uses an inner liner, and the liner is the real moisture barrier. A drum whose liner has been cut open and folded back is an open pack, whatever the lid says. In the finished product, the collagen peptide is usually the hygroscopic component in the blend. A stick pack with a good foil laminate protects it; a clear jar with a screw cap does not, especially in a bathroom or a warm kitchen. If the format is a jar, the desiccant and the fill headspace belong in the development work, and the shelf life should be supported by a test in that jar. ## How shelf life is assigned Shelf life is assigned from the stability data for the specific pack and the specific market, not from a default attached to the ingredient. The number on the pack should be the longest point at which moisture, appearance, odour and solubility still meet the specification with a margin. If the data stop earlier, the shelf life stops earlier. The specification should therefore state the storage condition as well as the shelf life: a cool, dry store away from strong odours, with the liner closed after use. Collagen peptides pick up aroma from their surroundings, so a drum stored next to a flavour concentrate can arrive smelling of it. That is a storage failure, not a manufacturing one, and it is visible on the retained sample before it reaches a customer. The batch file and the retained sample are described on the quality page. For the parameters that are tracked over time, see the COA page; for the grade that suits a given matrix, see the grade comparison. The product range is on the collagen peptides page. ### 04 Collagen peptides: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/protein-collagen/collagen-peptides/moq/ Reviewed: 2026-11-18 Collagen peptides start at one kilogram because that is the smallest quantity that supports a real trial: enough for bench work, a small stability lot and a second run after the first result, with material from one lot. The 25 kg fiber drum is the production pack. Between those two points sit the things that actually delay an order: the specification, the pack, the destination and the documents. In one lineOne kilogram is the trial pack and the 25 kg drum is the production pack; the order is decided by the specification and the documents, not by the minimum. ## Why the minimum is one kilogram A formulator needs enough powder to run a trial at the real concentration, repeat it once, and keep a sample back for the stability pull. One kilogram covers that for most powder, capsule and beverage trials, and it does it from a single lot, which matters because a second lot would move the peptide distribution and the odour between the two runs. The minimum is not a discount threshold and it is not a promise about the 25 kg drum. It exists so that a project can be tested before a production quantity is committed. A buyer who needs 3 kg for a pilot can order three pouches; a buyer who needs 300 kg should plan the drum, the pallet and the lead time together. ## Packaging Pack formats · collagen peptides | Pack | Net content | Use | Watch | Foil pouch | 1 kg | Bench and pilot trials, samples | Reseal after opening; high headspace | Fiber drum with liner | 25 kg | Production | Liner is the moisture barrier The pouch is a laminate with a moisture barrier and a resealable closure. The drum is a fiber drum with an inner liner; the liner, not the board, keeps the powder dry, and a liner that has been cut and folded back leaves the material exposed. Both packs carry the product name, the lot number, the net weight, the storage condition and the allergen statement for the source. Other pack sizes can be agreed where the line needs them, but the specification should then name the pack, because the pack is part of the stability position. A 5 kg bag in a humid store is not the same shelf-life proposition as a sealed 1 kg pouch. ## Lead time The 1–7 day lead time applies to material held in stock in the standard pack. It runs from the point at which the order, the specification and the shipping details are all confirmed, not from the first email. A purchase order that arrives before the specification is agreed does not start the clock. Orders that need a different pack, a granulated grade, a documentation set the site does not hold or a destination the standard route does not cover are made to order and take longer. The quotation should state which case applies rather than leave the buyer to infer it from the 1–7 days on the product page. ## What a quotation needs - The product, the grade and the specification revision, including the species, the tissue and the molecular weight distribution. - The quantity, the pack format and whether the order is a trial or a production release. - The destination, the Incoterm and the delivery address, because these decide the route and the documents. - The documentation required: COA, specification, safety data sheet, allergen statement, and any BSE/TSE or origin statement for bovine material. - The label and lot-marking requirements, where the buyer's own label is applied. - The required delivery date and any restriction on the carrier or the packaging material. A quotation that answers only the first two items is a starting point, not a complete offer. The remaining four are where orders are lost between the offer and the shipment. ## Samples A sample should come from the lot that will be supplied, and it should carry the same documentation as the commercial pack: the lot number, the COA for that lot and the allergen statement. A sample with no lot number is a demonstration, not a trial material, and it cannot be used to support a stability study or a label decision. Ask for enough to run the trial twice. A 100 g sample is enough to see whether the powder dissolves; it is not enough to run a second trial after a change, and it is not enough to keep a retained portion. The 1 kg pouch exists for this reason. ## Where the terms end The commercial terms belong in the quotation and the contract, not on a product page. What the page can say is what the supplier controls: the specification the material is released against, the pack, the documentation set and the lead time for stock material. What the buyer controls is the destination, the label, the storage after arrival and the use of the material in the finished product. Two boundaries are worth writing down before the first order. The first is the re-test or retest period and the storage condition: a material stored outside the stated condition is outside the specification. The second is the complaint window and the retained sample: a claim that cannot be checked against a retained sample is a claim that cannot be resolved. The quality page describes how both are handled. For the parameters that the order is placed against, see the COA page; for the pack and grade choice that the order should name, see the grade comparison; for the documents that ship with the drum, see the compliance page. The definition of the minimum is in the MOQ glossary entry. ### 05 Where collagen peptides are permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/protein-collagen/collagen-peptides/compliance/ Reviewed: 2026-11-18 Collagen peptides are a food ingredient in the markets this site supplies, not a regulated additive and not a drug. What varies by market is the paperwork that proves the source, the contaminant limits that apply to the product as sold, the way the protein and the source are declared, and the claims that may be attached to them. The product itself needs no approval; the file around it does. In one lineCollagen peptides are a food ingredient in the EU, the US and the UK; the permitted use is rarely the question, and the source, the allergen and the contaminant file usually are. ## The four checks The first check is whether the material is a permitted food ingredient in the destination market. The second is whether the source triggers a specific documentation requirement, which for bovine material means the TSE/BSE file and for fish material means the allergen declaration. The third is whether the contaminants are inside the limit that applies to the product as sold. The fourth is whether the label and any claim are worded the way the market allows. Each check has a different owner: the ingredient status belongs to the supplier and the importer, the allergen declaration to the recipe and the label, the contaminant limit to the food category, and the claim to the brand. ## European Union Collagen peptides have a history of food use in the European Union and are not, as far as this review can establish, treated as a novel food. That position is about the ingredient, not about every source: the current novel food catalogue should be checked for the specific material before a new source is launched. For bovine material, the TSE/BSE documentation is part of the supplier file. The declaration should name the species, the tissue, the country of origin and the processing that the material has undergone, and it should be available before the first shipment rather than after it. The exact form of the document expected can differ between member states, so the importer should confirm what the destination authority accepts. Allergen labelling follows Regulation (EU) No 1169/2011. Fish is an allergen on that list, so a fish-derived collagen peptide carries a declaration that a bovine one does not. The declaration has to survive the labelling of the finished product, including the ingredient list and any emphasis in the text. For a bovine or porcine source, the allergen question is usually about the carriers and the processing aids rather than the collagen itself. ## United States In the United States, collagen peptides are used as a dietary ingredient in supplements and as a food ingredient in conventional foods. The supplier should be able to state the basis on which the material is sold for the intended use, and the buyer should keep that statement in the file. A familiar protein still needs a documented basis when the ingredient is new to a formula. The label declares the protein content in the Nutrition Facts or Supplement Facts panel and names the source in the ingredient statement. A product described as bovine collagen should say so, and one that contains fish collagen should carry the FALCPA fish declaration. There is no federal maximum level for lead in dietary supplements, so the buyer's specification and any state-level rule carry more of the weight. California Proposition 65 may apply to a product sold in that state. The warning thresholds are dose-based, so a lot that is comfortably inside a specification can still require a warning at a high daily intake. The destination and the dose have to be checked together, before the label is printed. ## United Kingdom The United Kingdom applies its own retained food law, so the applicable contaminant limits and allergen rules should be checked against the current UK text before a lot is released for that market. The 14 allergens, fish among them, remain the reference for declaration, and food sold prepacked for direct sale has to carry the allergen information on the label itself. As in the EU, the bovine TSE/BSE file and the species declaration belong in the supplier pack, and the UK importer should confirm what the destination authority accepts. ## The contaminant table Contaminant limits · collagen peptides sold as a food supplement, by market | Element | EU | US | UK | Lead | 3.0 mg/kg | No federal limit specific to supplements; state rules apply | Check the current UK limit | Cadmium | 1.0 mg/kg | No federal limit specific to supplements | Check the current UK limit | Mercury | 0.10 mg/kg | No federal limit specific to supplements | Check the current UK limit | Arsenic | Not harmonised; member state rules may apply | No federal limit specific to supplements | Check the current UK limit The EU figures come from Regulation (EU) 2023/915 and apply to food supplements as sold; a collagen peptide sold as an ingredient to a food manufacturer is assessed against the limit for the food category it enters. Arsenic is not harmonised at EU level, so a member state may apply its own limit, and the specification should state which limit it is tested against. ## Claims No disease-related claim is permitted for a food or a food supplement in any of the three markets. Protein claims are regulated separately: “source of protein” and “high protein” have conditions attached, and a collagen peptide that meets the protein figure still has to meet the conditions for the food as sold, not for the powder in the drum. In the EU, a claim about collagen peptides would need to be authorised under Regulation (EC) No 1924/2006; as of this review there is no authorised health claim for collagen peptides, so the label should stay with the nutrient content and the ingredient description. In the US, a structure/function statement is the brand's responsibility and must be truthful and substantiated. This site makes neither kind of claim: the wording on the pack belongs to the brand and to the market. ## The document pack - Batch COA with protein, hydroxyproline, molecular weight, moisture, ash, pH and the contaminant results. - Specification and technical data sheet naming the species, the tissue and the peptide distribution. - Safety data sheet in the 16-section format. - Allergen statement for the source, with fish declared where fish material is used. - TSE/BSE declaration and origin statement for bovine material. - Statement of the basis for sale as a dietary ingredient in the US, where applicable. - Non-GMO, residual solvent and, where required, halal or kosher statements. ## What to check before the first order - Is the species and tissue named on the specification, and does it match the label? - Does the allergen statement cover the source and every carrier in the pack? - Is the TSE/BSE file complete for bovine material, and does it name the origin? - Do the contaminant results cover the limit for the product as sold in the destination, including any state rule? - Is every claim on the label a nutrient content claim or a documented structure/function statement? The product page carries the specification behind this page. The source decision is set out on fish versus bovine collagen peptides, and the market summaries are on the EU and US regulatory pages. The quality page describes how the file is assembled. ### 06 How we prove a collagen peptide is collagen, and which species URL: https://nutrition.rainwoodbio.com/products/protein-collagen/collagen-peptides/identity/ Reviewed: 2026-11-18 Proving that a powder is a collagen peptide takes four separate answers: that it is protein, that the protein is collagen, that it has been hydrolysed to the declared size, and that it comes from the declared species and tissue. No single test covers all four, and a certificate that reports only the protein figure has answered the first question and skipped the other three. In one lineIdentity is four tests, not one: the amino acid profile, hydroxyproline, the molecular weight curve and the species, each answering a different question. ## The four layers The first layer is protein: the material is a peptide mixture, and its amino acid profile is dominated by glycine, proline and hydroxyproline. The second layer is collagen: hydroxyproline is the marker that separates a collagen hydrolysate from other proteins, because it is rare outside collagen. The third is the degree of hydrolysis: the molecular weight distribution shows how far the chains were cut. The fourth is the source: the species and the tissue, which the certificate declares and which can be checked by a DNA method. The layers are independent. A lot can be genuine collagen and still be the wrong species; it can be the right species and over-hydrolysed for the intended label; it can be a fine peptide mixture and still carry non-collagen nitrogen. Each layer needs its own evidence, and the evidence belongs in the batch file rather than in a marketing sentence. ## The hydroxyproline-to-protein ratio Hydroxyproline is measured colorimetrically, and the result is compared with the protein figure. The catalogue range is 8.0–12.0% hydroxyproline at ≥90.0% protein, which is roughly 9–13 g of hydroxyproline per 100 g of protein. That ratio is the simplest identity check available, because it compares two numbers that are already on the certificate. A high protein figure with a low hydroxyproline figure is the signal that matters. It means the nitrogen in the drum is not all coming from collagen. The extra nitrogen can come from another protein, from a non-protein nitrogen source, or from a collagen material that has been diluted with a nitrogen-rich carrier. The protein figure alone cannot tell those three apart; the ratio shows that something needs to be explained. The reverse is less common but possible: a high hydroxyproline figure with a low protein figure suggests a material that has been blended with free amino acids or with a non-nitrogenous filler. The COA page sets out how the two figures are reported together. ## The molecular weight distribution The molecular weight distribution is measured by size-exclusion chromatography with an HPLC system, and the specification states the share of the mass below a cut-off: ≥90% below 3,000 Da for the catalogue grade. That single number is a gate, not a description. Two lots can both meet it while sitting at opposite ends of the distribution, and the difference shows up in solubility, in mouthfeel, in foam and in odour. The distribution proves hydrolysis; it does not prove identity. A whey protein hydrolysate can also be measured by SEC-HPLC and can also be reported below a cut-off. What the method does is link the powder to the process that made it and to the behaviour the formulator is buying. Ask for the distribution by mass fraction, not only for the percentage under the cut-off, because the tail above the cut-off is what makes a clear drink hazy. ## Why XRD is not the identity test here Collagen peptides are amorphous. A diffraction scan of the powder gives a broad halo around 20° two-theta and no sharp reflections, and gelatin, a whey hydrolysate and a collagen peptide look much the same in that region. The method cannot separate collagen from another hydrolysed protein, measure the degree of hydrolysis or name the species. The detection limit for a crystalline minor phase is typically a few percent, and the peptide itself has no crystal lattice to read. Where XRD earns a place is the screen for crystalline additions: sodium chloride, lactose or a crystalline mineral diluent returns sharp peaks that a peptide powder should not have. That is a check on the drum, not proof of identity. The identity evidence remains hydroxyproline, the amino acid profile, the SEC molecular weight curve and species PCR; the XRD method note sets out what a phase scan can and cannot establish. ## The adulteration routes Adulteration routes · what each one changes | Route | What it does | Signature | Gelatin or partly hydrolysed collagen | Raises the protein figure with genuine collagen | Higher molecular weight, gelling, slower dissolution | Other protein (whey, soy, pea) | Raises the protein figure at lower cost | Lower hydroxyproline, different amino acid profile | Non-protein nitrogen | Inflates Kjeldahl without adding protein | Protein up, hydroxyproline flat, amino acid profile short | Non-type-I collagen tissue | Substitutes bone or cartilage for hide | Tissue declaration, wider peptide curve, mineral load | Species substitution | Porcine or fish material sold as bovine | Species PCR on the retained sample Gelatin is the hardest route to see, because the material really is collagen. The difference is the degree of hydrolysis, and it is visible in the molecular weight curve and in the way the powder behaves in water. The other proteins are easier: they lower hydroxyproline and change the amino acid profile. Non-protein nitrogen is the case that most needs the hydroxyproline check, because it raises the protein figure without raising any amino acid. ## What to write into the specification - “Hydrolysed collagen peptides, type I, bovine hide; species and tissue stated on the certificate.” - “Protein ≥90.0% dry basis by Kjeldahl with N × 5.55; factor and basis stated on the COA.” - “Hydroxyproline 8.0–12.0% by colorimetric method.” - “Molecular weight: ≥90% below 3,000 Da by SEC-HPLC; distribution reported by mass fraction.” - “Amino acid profile reported; no added non-collagen protein or non-protein nitrogen.” - “Species verified by PCR on request; retained sample kept for the shelf life of the lot.” ## Questions to put to a supplier - What is the hydroxyproline figure on this lot, and what is it as a share of the protein figure? - Can you send the full molecular weight distribution, not only the percentage below the cut-off? - Which species and which tissue does the certificate declare, and is there a PCR report? - Does the lot contain any protein or nitrogen source other than the declared collagen? - What retained sample is kept, and for how long after the lot is released? For the tests behind these answers, see the COA page and the HPLC method note. The source decision is set out on fish versus bovine collagen peptides, and the regulatory file that the identity evidence supports is on the compliance page. The full range is on the product page. ### 02.1 Fish or bovine collagen peptides: what the source changes URL: https://nutrition.rainwoodbio.com/products/protein-collagen/collagen-peptides/grades/fish-vs-bovine/ Reviewed: 2026-11-18 Fish and bovine collagen peptides are both collagen hydrolysates, and the amino acid profile that defines them is close. The source changes four things that a formulator has to live with: the allergen declaration, the peptide curve the supplier can hold, the odour and colour of the powder, and the market and religious positioning of the finished product. None of those is decided by the protein percentage. In one lineThe source changes the allergen declaration, the peptide curve, the odour and the market access before it changes anything about the protein. ## The allergen is the first difference Fish is on the allergen list in the European Union and in the United States, so a fish-derived collagen peptide carries a declaration that a bovine one does not. That declaration follows the ingredient into the finished product and into every market where the list applies. A beverage that is otherwise free of allergens becomes a fish-containing product, and the label, the precautionary statements and the customer questions change with it. Bovine collagen is not itself a declared allergen, but it brings a different file: the TSE/BSE documentation, the species and tissue declaration and the country of origin. The two sources therefore trade one documentation burden for another. The compliance page sets out what each file has to contain. ## Molecular weight and solubility Both sources can be hydrolysed to a fine peptide curve, and the specification decides what the curve actually is. What differs is how easily the raw material gets there. Fish skin and scales are a softer, more soluble starting material, and fish collagen is often supplied at a finer distribution; bovine hide is denser and needs a longer hydrolysis to reach the same place. Neither statement replaces the SEC-HPLC result on the lot. Solubility in the finished drink follows the curve, not the species. A fish peptide and a bovine peptide with the same distribution dissolve at similar speed and give similar haze. Where the source does show through is in the tail above the cut-off: a bovine grade that is only just inside the specification can leave more haze than a fish grade that sits lower in the distribution. The comparison should be made on the distribution, not on the word on the front of the pack. Fish collagen has a lower denaturation temperature than mammalian collagen, which matters more to a gelling or a chilled product than to a dry powder. In a hydrolysed peptide, the chains are already short, so the difference is smaller, but a chilled dessert and a hot drink are not the same matrix for either source. ## Taste, odour and colour Bovine hide collagen is usually the more neutral of the two. Fish collagen can carry a marine or fishy note that strengthens with the degree of hydrolysis and with storage, and a fruit flavour does not always cover it. The note is not a defect in the specification; it is a property of the raw material, and it is the first thing a sensory panel picks up in a flavoured beverage. Colour runs the other way in some lots: fish material can be slightly brighter, bovine material slightly creamier. Both are white to off-white in the catalogue, and both can drift during drying. If the product is a clear drink, the sensory trial should be run at the real concentration with the real flavour, because the same powder can be acceptable in a 5 g stick and noticeable in a 15 g serving. ## Regulatory and religious position Fish versus bovine · what the source changes | Point | Fish | Bovine | Allergen | Fish must be declared | Not a declared allergen itself | Supplier file | Species, origin, allergen statement | TSE/BSE declaration, species, tissue, origin | Religious use | Accepted by many halal and kosher users | Halal or kosher status depends on the certificate | Typical curve | Often finer; confirm by SEC-HPLC | Wider range; confirm by SEC-HPLC | Odour risk | Marine note possible | More neutral; broth note possible | Label wording | Fish or marine collagen, with the species named | Bovine collagen, with the tissue named Religious and vegetarian positioning is a marketing decision with a documentation consequence. A collagen peptide is an animal-derived ingredient either way, so neither source fits a vegan claim. A halal or kosher certificate applies to the specific site and process, not to the species in general, and it has to be renewed like any other certificate. ## The cost logic The cost of a collagen peptide follows the raw material supply and the hydrolysis yield, not the species label alone. Bovine hide is a large, steady by-product stream with an established supply chain and a long record of use. Fish skin and scales are more seasonal and more perishable, and the raw material has to be processed close to the source, which puts a floor under the cost of the finished peptide that a bovine grade does not always have. Yield works the other way in some cases: a softer fish raw material can reach a fine curve with less hydrolysis, so the processing cost per kilogram of finished peptide can be lower even where the raw material is dearer. The comparison only makes sense per kilogram of peptide at the specified distribution, not per kilogram of raw material and not per percentage point of protein. Any quotation should be compared on the same specification, the same pack and the same delivery point. ## What the label can say The ingredient statement has to name the source. “Hydrolysed collagen peptides” without a source is incomplete where the source is a selling point, and “marine collagen” is a category, not a species. If the pack says fish, the allergen declaration has to be there as well. If the pack says bovine, the tissue can be named, and the TSE/BSE file should support it. The molecular weight wording is a separate decision. A pack can describe the material as collagen peptides or as hydrolysed collagen; the two are not interchangeable in every market, and neither should be used to imply a size that the certificate does not show. The wording should match the specification, not the other way round. ## How to choose Choose fish when the product needs the finest curve the supplier can hold, when the market values a marine source, or when the religious positioning rules out bovine material. Choose bovine when a neutral odour, a broad supply base and a file without a fish allergen are worth more than the finer curve. Neither choice is settled by the protein figure. Both should be settled by a sensory trial at the real dose and by a certificate that shows the distribution, the hydroxyproline figure and the source. For the grade logic behind the decision, read the grade comparison; for the tests that support the source claim, read the identity page. The full range is on the product page. ### 01 What the COA for taurine actually contains URL: https://nutrition.rainwoodbio.com/products/amino-acids/taurine/coa/ Reviewed: 2026-11-18 A taurine certificate reports identity by infrared, the assay on the dried basis with its method, loss on drying, residue on ignition, chloride, sulfate, iron, the heavy-metal panel and microbiology. The assay window of 98.5–101.5% is three points wide, so two lots can both sit inside it and still differ in what the drum contains. Read the lines beside the purity figure: the specification is a catalog range, and only the certificate carries a lot's own numbers. In one lineA taurine assay is only meaningful with its basis, its method and the ash line beside it; the purity figure alone can hide a cheap grade. ## The certificate as one sheet A taurine certificate is built from the release specification, not from a marketing description. Each line names the parameter, the method and the limit the lot was released against, and the result sits beside them. A line that says “conforms” without a number is a conclusion, not a measurement. Batch COA · taurine, catalog specification | Parameter | Method | Release limit | Appearance | Visual | White crystalline powder | Identification | IR | Conforms to the reference spectrum | Assay (dried basis) | HPLC or titration | 98.5–101.5% | Loss on drying | Gravimetric | ≤0.3% | Residue on ignition | Gravimetric | ≤0.1% | Chloride | Wet chemistry or ion chromatography | ≤0.05% | Sulfate | Wet chemistry or ion chromatography | ≤0.03% | Iron | Colorimetric or ICP-OES | ≤30 ppm | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg Microbiology is reported as a second block: aerobic plate count ≤1,000 cfu/g, yeast and mould ≤100 cfu/g, and E. coli and Salmonella absent. Particle size is reported by sieve at 20–200 mesh, because the mesh is a purchasing decision as much as a quality one. Neither block is optional on a lot that will be blended into a finished product. ## What the assay is measured against Three bases are in use in this trade: as-is, dried and anhydrous. They are not interchangeable, and the gap between them is real. The catalog range of 98.5–101.5% is set on the dried basis, so the result is corrected for the water the loss-on-drying test found. A lot at the 0.3% moisture limit can read a third of a point lower as-is than it does dried. The range is only three points wide, so the choice matters. A lot near the lower edge can pass on one basis and fail on another without either party doing anything wrong; they answered different questions. A result above 100% is also normal on the dried basis, because the calculation divides by the dry mass: a 101.5% figure is not a richer lot until it is read on the same basis as the water and the ash. Titration and HPLC answer different questions. Titration measures acid equivalents, so it is fast and reproducible but blind to a second acidic species in the same range. HPLC is selective, but taurine has no aromatic chromophore: the method must derivatise the amine or use a detector that does not depend on UV absorbance, and the certificate should say which. The specification allows either method; the certificate has to name the one it used. ## Release limit versus lot result A release limit is a range. A lot result is a measurement. The useful certificate shows both, with the method that produced the result. “Passes specification” is a judgment, and a buyer cannot audit a judgment without the numbers behind it. Some lines are limits and some are reports. Iron at ≤30 ppm is a limit, but two compliant lots can sit at opposite ends of that range and behave differently in a formulator's hands: iron is the usual source of a yellow tint, and it is the element that stains a blend when moisture is present. The ash line works the same way. Residue on ignition at ≤0.1% caps inorganic carry-over, and the chloride and sulfate limits sit under it. A drum that passes the assay but sits at the top of all three inorganic lines has been purified less, and the certificate is where that shows. ## What changes between batches Chloride and sulfate follow the purification train: the ion-exchange step, the recrystallisation, and the quality of the water used at the end. Residue on ignition follows the same steps. Iron follows contact with steel and the condition of the drying equipment. Particle size follows milling and sieving. Every one of them points to a step in the process. The assay follows the reaction yield and the crystallisation, but it is the least informative line on the sheet when it is read alone. Because the window is wide and the measurement is corrected to the dried basis, a lot that is slightly diluted can still land inside it. The impurities are where a change of source, a change of water or a rushed recrystallisation becomes visible. Colour is the least quantitative signal and often the earliest. A cream or pale yellow tint can come from iron, from a drying step that ran hot, or from a wash that was cut short. The assay can still pass. The tint is a reason to ask for the batch record, not a reason to reject the lot on sight. ## When to order third-party testing Order an outside test when the supplier is new, when the first shipment goes to a market you have not shipped to before, or when the label makes a source-route claim the certificate does not support. The useful panel is not a full repeat; it is the set of tests that answers the question the certificate leaves open. For taurine that usually means IR against a reference spectrum, the assay by the other method, ion chromatography for chloride and sulfate, and ICP-MS for the metal panel on the same sample. If the label claims a fermentation route, ask the laboratory what marker it can measure; most certificates carry none. A second laboratory also settles disputes: send the retained sample, the certificate and the specification. ## What to compare between suppliers Put six lines side by side before comparing anything commercial: the assay with its basis and method, the loss on drying, the residue on ignition, chloride and sulfate, iron and the heavy-metal panel, and the particle size with microbiology. If two quotations agree on the assay and disagree on the rest, they are not quoting the same material. The second layer is the batch record: who manufactured the lot, which route was used, which purification steps were applied, and where the retained sample is kept. A certificate can be accurate and still describe a lot that is not the lot in your warehouse. The lot number on the certificate, on the drum and on the retained sample should be the same number. The specification behind this page is on the taurine product page. The grade logic is on the grade comparison page, the tests that separate taurine from a blend are on the identity page, and the release workflow is described on the quality page. ### 02 One assay, three questions: choosing a taurine grade URL: https://nutrition.rainwoodbio.com/products/amino-acids/taurine/grades/ Reviewed: 2026-11-18 Taurine is one molecule with one catalog assay range, so a grade is not a different purity: it is a different answer to three questions. Which route made it, how finely was it milled, and how much inorganic carry-over does the drum contain? Those three answers decide what the material does in a capsule, a stick pack or a solution, and they are not visible in a “99%” quotation. In one lineThe grade question is not the assay: it is the source route, the particle size and the ash the drum actually carries. ## Why the grade is not the assay Every taurine lot that meets this specification sits inside the same 98.5–101.5% window on the dried basis. Two drums can both be inside it and still differ in ways a formulator feels: one may flow, one may cake; one may dissolve clear, one may leave a haze; one may carry a documented fermentation route, one may not. The assay is a single number produced by a method that either titrates acid equivalents or separates the molecule chromatographically. It is a good release test and a poor description. The grade is the description: the route behind the crystal, the mesh in front of it, and the ash beside it. ## The grades side by side Taurine grades · what changes in the drum | Grade | What it is | Fits | Watch | Fermentation-derived | Crystalline taurine from microbial conversion; standard mesh | Brands whose label or specification names the route | Route has to be documented; the COA often does not carry it | Synthetic | Crystalline taurine from petrochemical intermediates; standard mesh | General capsule, tablet and stick use | Same specification; route usually absent from the certificate | Low-ash | Residue on ignition and anions held well inside the limits | Sensitive blends, clear solutions, beverages | More purification; ask for the actual figures, not the word | Standard ash | Inside the catalog limits, nearer the caps | Dry blends where ash does not matter | Watch the trend across lots, not one certificate | 20–200 mesh powder | The standard crystalline powder | Capsules, tablets, dry blends | Dust and segregation in a low-dose blend | 80 mesh milled | Finer powder, milled on request | Sticks, suspensions, fast dissolution | Flow drops and caking risk rises | Granulated | Agglomerated on request | Tablets, sachets, blends that must run | Confirm the granulation aids; it is not a purity change Reading down the first column is the useful exercise. “Taurine 99%” specifies almost nothing; “taurine, fermentation-derived, low-ash, 80 mesh” specifies a material. The grade name only becomes meaningful when it is tied to a certificate that reports the same parameters. ## What changes in the drum Milling changes particle size, surface area and flow. A fine powder dissolves faster and blends more evenly at a low dose, but it also generates dust, holds static and can segregate in a blend that is moved more than once. A coarse crystal flows well and resists caking, but it may not dissolve fast enough for a stick pack that is stirred into water. Ash changes the inorganic load. Residue on ignition is the sum of what the purification left behind, and chloride and sulfate are the two anions that usually make it up. A high-ash lot is not a different molecule, but the salts it carries are hygroscopic, so the drum picks up moisture faster and cakes harder under stack pressure. In a clear solution, that same load can show as a faint haze. Granulation changes flow and dust without changing the chemistry. It is a legitimate way to make a cohesive powder run on a press or fill a sachet, provided the specification names the aids used. A granulated grade is not a purer grade, and it should not be sold as one. ## What changes in the finished product In capsules, the constraint is fill weight and blend uniformity. A typical taurine dose occupies a meaningful share of a capsule, so the powder's bulk density decides how many capsules a formula needs. A finer mesh helps uniformity; a denser granule helps fill weight. Neither changes the assay the label declares. In tablets, flow and compaction matter more than mesh. A fine milled powder may need granulation to run; a granulated grade may need a different lubricant or a different compression force. In sticks and drink mixes, dissolution and taste move to the front: taurine is an acidic solid, and its 5% solution sits at pH 4.0–6.0, which is a taste and compatibility fact before it is a quality fact. In gummies and chews, the matrix is the risk. An acidic ingredient plus a reducing sugar plus heat is the condition that browns a batch, and the grade cannot fix a formula that sets those three together. In beverages, clarity and ash are the grade questions; the route is a label question. None of these decisions is settled by the certificate alone. ## What to write into the specification - “Taurine, 2-aminoethanesulfonic acid, CAS 107-35-7.” - “Assay 98.5–101.5% on the dried basis by HPLC or titration; method named on the COA.” - “Loss on drying ≤0.3%; residue on ignition ≤0.1%; chloride ≤0.05%; sulfate ≤0.03%.” - “Iron ≤30 ppm; heavy metals Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg.” - “Particle size 20–200 mesh; source route stated if the label names it.” A specification that names the route, the mesh and the ash gives the laboratory something to release against. A specification that names only the assay gives the supplier room to change all three without breaching the order. ## When a grade change is not needed If the label does not name the route, the destination market does not require it, and the certificate already supports the claims that are made, choosing a documented fermentation grade buys documentation rather than a better material. If the blend is dry, the ash is comfortably inside the limits, and the finished product is a capsule or a tablet, a low-ash grade solves a problem the formula does not have. A finer mesh is not an upgrade for a tablet blend that needs density, and a granulated grade is not an upgrade for a capsule formula that already flows. The grade should answer a constraint in the dosage form, the label or the market. When it answers none of them, it is a line on the quotation, not a quality decision. The tests behind these grades are on the COA page. The route question is expanded on fermentation versus synthetic, the blend risks are on the stability page, and the specification itself is on the taurine product page. Particle size terms are defined in the glossary. ### 02.1 Fermentation or synthetic taurine: what the route changes URL: https://nutrition.rainwoodbio.com/products/amino-acids/taurine/grades/fermentation-vs-synthetic/ Reviewed: 2026-11-18 Fermentation-derived and chemically synthesised taurine are the same molecule: C₂H₇NO₃S, CAS 107-35-7, the same crystal, the same assay range and the same certificate panel. What differs is the process behind the crystal, and with it the trace profile a laboratory can look for, the documentation a supplier can produce, and what a label is entitled to say about origin. In one lineThe molecule is the same on both routes; what changes is the trace profile, the documentation and what the label is allowed to imply. ## Two routes to one crystal The synthetic route builds taurine from petrochemical intermediates: the carbon backbone and the sulfonic acid group are assembled through a sequence of reactions, and the product is purified and crystallised. The fermentation route uses a microorganism to convert a carbon source and a sulfur source into taurine, after which the broth is clarified, purified and crystallised. Both routes end at the same place: a white crystalline powder that has to meet the same specification. A well-purified lot from either route can pass the same assay, the same infrared comparison and the same anion limits. That is why the route is not visible on a standard certificate, and why a buyer who needs to know has to ask rather than infer. The route is a process claim, not a purity grade. Reading fermentation as automatically purer, or synthesis as automatically more consistent, is an assumption the certificate does not support. What the route changes is the set of process-specific residues that could be present and the paper trail that should accompany them. ## The impurity profile The release panel is the same for both routes: chloride, sulfate, residue on ignition, iron and the heavy metals. Those lines describe how well the purification worked, not how the molecule was made. A high ash figure on a fermentation lot and a high ash figure on a synthetic lot point to the same conclusion, which is that the recrystallisation or the wash was not pushed far enough. Where the routes can diverge is in the trace residues the standard panel does not cover. A synthetic route can leave traces of the reagents and solvents used to build the sulfonic acid; a fermentation route can leave traces of the broth, the media or the organism's own metabolites. Neither is a defect by definition; both are questions the specification can ask. If the buyer's risk assessment calls for it, add a residual-solvent screen or a route-specific marker test to the specification and have it run on the lot. The practical point is that the certificate usually stops at the same panel for both routes. A supplier who says “fermentation” and a supplier who says “synthetic” can hand over certificates that look identical, because the certificate was never designed to tell them apart. ## Labels and origin claims A source claim on a label is a claim like any other: it has to be true, documented and verifiable. “Fermentation-derived” is a statement about the process, and it should rest on a batch-level declaration from the manufacturer, not on a marketing deck. If the label says it, the purchase specification should require it, the certificate or an attached declaration should confirm it, and the change-control clause should require notice before the route is switched. “Natural” is a harder word. It has no settled definition for a food ingredient in the EU, and in the US it is a labelling policy rather than a synonym for fermentation. A fermentation route does not automatically make taurine “natural”, and a synthetic route does not automatically make it something else. This site does not use either word as a claim; it states the route only where the file supports it. What a label should not do is imply a benefit from the route. The route is a sourcing fact. It does not turn the same molecule into a different efficacy story, and a page that suggests otherwise is selling an assumption. ## The regulatory file In the EU, taurine is used as a food ingredient rather than as an Annex II vitamin or mineral, and its use in food supplements is regulated at Member State level; energy drinks have their own rules. A change of production route can raise a separate question under the novel food framework if the process was not used for that food before the cut-off date and the change affects composition or safety. That is a question for the regulatory file, not a conclusion to be drawn from the word “fermentation”. In the US, taurine is a dietary ingredient, and the exact form needs a lawful basis. The route is part of what the supplier should document, because a change of process is a change the brand may need to review. In the UK, check the current legislation and the retained lists; the retained lists do not make taurine an Annex II mineral either. In every market, the molecule's status and the route's documentation are two different questions, and both belong in the file. The EU, US and UK references collect the instruments to check. ## What to ask a supplier - Which route made this lot: fermentation, chemical synthesis, or a mix of sources? - Is the route stated on the COA, the TDS or a separate declaration, and at batch level? - What marker or residue distinguishes this route, and has it been measured on this lot? - Which facility ran the route, and is it the same facility that will run the next order? - What notice will we receive before the route or the facility changes? - Can the route be written into the specification and the purchase order as a release condition? ## When to specify a route Specify the route when the label names it, when a customer or a certification scheme requires it, when the brand's own sourcing policy commits to it, or when a previous lot was rejected on a route-related question. In those cases the route belongs in the specification with a declaration and a change-notification clause, because a route that is not written down is a route the supplier can change without breaching the order. Do not specify a route when no claim depends on it and the certificate already meets the specification. A specified route buys documentation, traceability and a story; if none of those is needed, the effort is better spent on the ash and anion figures, which change what the drum does in a blend. The grade logic is on the grade page, the certificate lines are on the COA page, the impurity logic is on the identity page, and the market rules are on the compliance page. ### 03 Taurine is stable dry; the blend is where it fails URL: https://nutrition.rainwoodbio.com/products/amino-acids/taurine/stability/ Reviewed: 2026-11-18 Taurine is a dry crystal with no hydrate of its own, and as a powder it keeps its assay as long as the pack keeps moisture out. The failures that reach a customer are almost never failures of the molecule. They are caking from humidity cycling, a colour change in a blend that contains a reducing sugar, and a haze or a crust that traces back to a high-ash grade. In one lineDry taurine is not the fragile part; moisture, an acidic or reducing blend and a high-ash grade are what change the result. ## The dry crystal Taurine is supplied as the free acid rather than a salt, and it does not carry water in its lattice, so there is no hydrate state to lose or gain. The catalog limit on loss on drying, ≤0.3%, is deliberately tight: it keeps the powder well below the moisture level at which crystals start to stick to each other. What goes wrong in a warehouse is physical, not chemical. A foil pouch breathes a little at every temperature swing; moisture migrates to the cooler surface and the powder at that surface forms a crust. Stack pressure then turns the crust into a lump. The assay in the middle of the drum is unchanged, which is why a caked lot can still pass every chemical test and still be unusable in a blender. Fine powders cake faster than coarse crystals because there is more surface per gram and more contact points. A milled 80 mesh grade therefore needs a better moisture barrier than a 20–200 mesh grade, not a different specification. ## In solution Taurine is freely soluble in water, and a 5% solution is acidic at pH 4.0–6.0. The sulfonic acid group is strongly acidic and fully ionised in the normal pH range, which is why the molecule behaves as a zwitterion rather than as a neutral organic acid. In a sealed, clean solution the molecule is not the unstable part. The reactive part is the primary amine. It is not a peptide bond former in the usual sense, because taurine has no carboxyl group to condense with, but an amine still reacts with a carbonyl. In a warm, acidic blend that contains a reducing sugar, that reaction runs and the batch browns. The same amine is a nutrient source for microorganisms, so an aqueous intermediate that is held without a preservative system will grow, and the resulting pH shift is not a taurine problem either. The practical conclusion is to keep the dry powder dry and to handle any solution as a short-lived intermediate with its own microbial and colour controls. ## What actually moves the result Stability factors · taurine powder and blends | Factor | What happens | Control | Humidity cycling | Crusting and caking at the surface | Moisture-barrier pack, sealed liner, controlled store | High ash grade | Hygroscopic salts take up water; haze in solution | Low-ash grade with the figures stated | Reducing sugar plus heat | Browning through the amine | Remove the sugar, separate the components, or control heat | Iron and moisture | Yellow tint that deepens over time | Iron limit, stainless contact, dry blend | Stack pressure | Lumps that survive blending | Pallet height, drum rotation, bag size | Fine mesh | Faster moisture pickup and dust | Granulate, or specify a coarser cut The table is ordered by how often each factor shows up in a complaint. Chemical degradation of taurine itself is not on the list because it is not the usual cause; a brown or caked lot is nearly always a moisture, ash or matrix story. ## A stability protocol that answers the question A useful protocol tests the material in the pack and the matrix that will ship, not the powder in a laboratory jar. Start with the finished pack: the 1 kg foil pouch for a sample programme, the 25 kg drum for a bulk qualification. Store it at the standard zone conditions your market uses, with an accelerated arm at 40 °C/75% RH and a long-term arm at 25 °C/60% RH or 30 °C/65% RH depending on the destination climate. At each timepoint, measure the assay on the dried basis, loss on drying, appearance and colour, and the anion panel. If the pack is a blend, measure the blend, not just the taurine: water activity, colour and the marker compound tell you whether the matrix is moving. A protocol that tests only the assay will report “stable” for a lot that has caked solid or turned brown. Fix the acceptance window before the first timepoint. A result that is judged after it is seen is not a stability study; it is a negotiation. ## Formulation and packaging The 1 kg foil pouch is the unit for sampling and small batches; the 25 kg fiber drum with a sealed liner is the bulk unit. Both rely on the liner, not on the fiber, for the moisture barrier, so the closure is part of the specification. A drum that is opened, partly used and closed again is no longer a controlled environment; plan the batch size so that opened packs are consumed. In the formula, keep taurine away from the two things that change it: a reducing sugar in the presence of heat and moisture, and a high-ash grade in a clear solution. If a stick pack has to contain both an acid and a sugar, the taurine can be granulated or the components can be split; what cannot be done is to assume the dry blend is inert because the certificate says the powder is stable. ## How shelf life is assigned Shelf life is assigned from real-time data in the commercial pack, supported by accelerated data and by the trend across lots. A supplier who quotes a shelf life without a protocol is quoting a habit. Ask for the protocol, the timepoints already completed, and the pack that was tested; a change of pouch, liner or drum is a change of pack and needs its own data. For a buyer, the practical question is not “how long is the shelf life” but “what does the supplier do when a lot reaches the end of it?” A retest date and an expiry date are different commitments, and the difference should be on the specification before the first order. The release tests that support these claims are on the COA page; the pack sizes are on the MOQ and packaging page; the grade that suits a moisture-sensitive blend is on the grade page. Loss on drying is defined in the glossary, and the product page carries the full specification. ### 04 Taurine: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/amino-acids/taurine/moq/ Reviewed: 2026-11-18 A taurine order starts at 1 kg, packed in a foil pouch and shipped with the certificate for the lot it came from. The lead time is 1–7 days after the specification and the order are confirmed. Everything else in the quotation follows from four variables: the grade, the pack, the destination and the documents the destination requires. In one lineOne kilogram from a released lot, with that lot's certificate, is the minimum; the rest of the quotation is grade, pack and destination. ## Why the minimum is one kilogram One kilogram is the smallest unit that still carries a lot identity. It is enough for a bench trial, enough for a second trial after the formula changes, and enough to keep a retained sample for the life of the project. Below that, a material stops being a lot and becomes a hand sample, and a hand sample cannot support a label claim or a release decision. The minimum is a packing unit, not a volume tier. A buyer who needs 500 g should ask for a sample rather than a split pouch, because a split pouch loses the sealed liner and the lot label that make the material traceable. A buyer who needs 30 kg should ask for the drum, because two pouches are not the same pack and the freight is different. ## Packaging Standard packs · taurine | Pack | Net weight | Material | Typical use | Watch | Foil pouch | 1 kg | Foil laminate, sealed | Bench trial, small batch, retained sample | Reseal after opening; keep the lot label | Fiber drum | 25 kg | Fiber drum with sealed liner | Production batch | Liner and closure carry the moisture barrier Both packs rely on the liner rather than on the outer wall. A pouch that has been opened and folded closed is not sealed, and a drum that has been opened for a partial weigh-out is no longer a controlled environment unless the liner is closed again. The label on the pack should carry the product name, the lot number, the net weight and the pack date; the certificate should carry the same lot number. ## Lead time The 1–7 day window is measured from two confirmations: the specification and the order. A quotation is not a confirmation, and an order placed against a different specification is a new order. If the material is held in stock in the standard pack, the window is short. If the grade has to be milled to 80 mesh or granulated, the window starts when that step is scheduled, not when the enquiry arrived. Documents run on a parallel clock. A shipment to a market that requires a certificate of origin, a safety data sheet in a specific format or a third-party certificate will not move on the strength of the commercial documents alone. Ask for the document list before the order is confirmed, so that the lead time quoted includes it. ## What the quotation needs - The product and grade: taurine, crystalline, with the mesh and the source route if either is specified. - The assay basis and method: dried basis, HPLC or titration, as written in the specification. - The quantity and the pack: 1 kg pouches, 25 kg drums, or a mix, with the number of each. - The destination and the delivery term, so that freight and documents are quoted on the same basis. - The documentation required: COA, specification, SDS, allergen and origin statements, route declaration. - Any additional test: third-party assay, ion chromatography, ICP-MS, or a sample for the buyer's laboratory. Six lines is enough to quote and enough to compare two quotations. A quotation that names only “taurine 99%” and a quantity is not comparable with one that names a grade, a basis and a pack, because the two may not describe the same drum. ## Samples A sample should come from the lot that will be offered, not from a separate sample stock. Ask for the lot number on the sample bag and on the certificate, and confirm that the sample was drawn before the pack was sealed rather than scooped from an opened drum. The quantity should be enough for the trial plus a retained portion; the buyer's laboratory will need both. A sample is also the right moment to test the things a certificate cannot show: how the powder flows, how fast it dissolves, whether it cakes after a week on the bench, and whether the colour matches the previous lot. Those observations take a week and avoid a rejected drum. ## Where the terms stop Commercial terms are quotation-only: this page describes the pack, the minimum and the lead time, and the quotation carries the rest. The minimum applies per grade and per pack; a mixed order is quoted line by line. The lead time is a commitment from confirmation, not from enquiry, and it assumes the specification that was quoted. Three boundaries are worth writing into the purchase order. The specification is the release document, so a change to the mesh, the ash limit or the route is a new specification and a new quotation. The certificate travels with the lot, so the lot number on the COA, the pack and the invoice should match. And a route claim is only a claim if it is documented; if the label says fermentation-derived, the order should require a declaration, not an assumption. The release tests are described on the COA page, the pack and moisture questions on the stability page, and the documents a destination may ask for on the compliance page. The product page carries the specification, and MOQ and lead time are defined in the glossary. ### 05 Where taurine is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/amino-acids/taurine/compliance/ Reviewed: 2026-11-18 Taurine is not a vitamin or a mineral, and that single fact changes the compliance file. In the European Union it is used as a food ingredient rather than as an Annex II mineral source; in the United States it is a dietary ingredient, and the exact form needs a lawful basis. The permitted use, the contaminant limit and the label rule are therefore three separate checks, and none of them is answered by the certificate alone. In one lineTaurine is not a vitamin or mineral in any of these markets; its use as a food or dietary ingredient is decided market by market. ## The checks that decide a market The first check is the category. A vitamin or mineral used in a food supplement is governed by the positive lists that name permitted sources; a food ingredient is governed by general food law and by whatever the Member State or federal authority requires. Taurine sits in the second group, and a file built on the first will miss the questions that matter. The second check is the permitted use in the destination: which product category, which dose, which population. The third is the contaminant limit, which is set per kilogram of product as sold and is not the same as the catalog specification. The fourth is the label and the claim, which is where most cross-border launches fail. ## European Union and the United Kingdom Taurine is not on the Annex II list of vitamin and mineral substances permitted in food supplements under Directive 2002/46/EC. It is used as a food ingredient, and its use in food supplements is regulated at Member State level rather than by a single harmonised rule. That means the position is not uniform: a product that is acceptable in one Member State may need a different justification, a different dose or a different presentation in another. Energy drinks are a separate case, with their own composition and labelling rules in several Member States. A permission that applies to a fortified food or a beverage does not automatically extend to a capsule, a stick pack or a gummy. As of this review, the safe reading is that taurine in supplements is market-by-market, and the first task is to identify the destination rule before the label is designed. Where the material is used, the label declares it in the ingredient list as a food ingredient; it is not declared as a vitamin or mineral source, because it is not one. In the UK, check the current legislation: the retained lists do not make taurine an Annex II mineral, so the same category question applies, and the retained contaminant and labelling rules should be confirmed against the current text. The EU and UK references collect the instruments to check. ## United States In the US, taurine is used as a dietary ingredient under DSHEA. The question is not whether taurine is a nutrient but whether the exact form has a lawful basis: it may be grandfathered, it may rest on a GRAS conclusion for the intended use, or it may require a new dietary ingredient notification. The supplier should state the basis in writing; it should not be inferred from the fact that taurine appears in foods. The Supplement Facts panel declares the amount per serving, and the ingredient list names the source. There is no federal maximum level for lead in supplements, so a lead specification is a buyer's requirement rather than a federal limit; California Proposition 65 may still apply and can require a warning at a low daily dose. The US regulatory reference lists the instruments and the state overlay. ## The contaminant table Catalog specification limits · taurine, and what each line is for | Parameter | Catalog limit | What it is for | Assay (dried basis) | 98.5–101.5% | Release identity and purity; basis must be stated | Loss on drying | ≤0.3% | Pack integrity and caking | Residue on ignition | ≤0.1% | Inorganic carry-over and grade | Chloride | ≤0.05% | Purification and grade | Sulfate | ≤0.03% | Purification and grade | Iron | ≤30 ppm | Colour and equipment contact | Heavy metals | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Contaminant panel; the legal limit is market-specific These are catalog specification limits, not legal limits. The legal contaminant limit depends on the market and on the product as sold, and it is expressed per kilogram of the finished product, not per kilogram of the raw material. A raw material that is inside the catalog limits can still produce a finished product outside a legal limit if the daily dose is high or the other ingredients contribute. Run the calculation on the finished product, not on the drum. Microbiology belongs on the same sheet: aerobic plate count ≤1,000 cfu/g, yeast and mould ≤100 cfu/g, and E. coli and Salmonella absent. It is a release requirement, not a regulatory claim, but a supplement brand will be asked for it. ## Claims Nothing in this file supports a functional claim of the kind consumer marketing attaches to taurine. The ingredient's regulatory position does not carry it, and this site makes no such statement. In the EU, a health claim must be authorised in the register before use, and the conditions attached to the entry apply. As of this review, a taurine claim should be checked against the current register: the absence of an entry means no authorised claim, not a default permission. In the US, a structure/function statement is the brand's responsibility, must be truthful and substantiated, and must carry the DSHEA disclaimer. The UK keeps its own register; check the current text. No market permits a disease-related claim for this ingredient. ## The document pack - Batch COA with the assay, its basis and method, the ash and anion lines, iron and the heavy-metal panel. - Specification and technical data sheet naming the grade, the mesh and, if claimed, the source route. - Safety data sheet in the 16-section format. - Allergen, GMO, origin and residual-solvent statements. - A written statement of the legal basis for the dietary-ingredient status in the US, where applicable. - A source-route declaration if the label or the specification names fermentation or synthesis. - Third-party COA where the buyer's review or the destination requires one. ## What to check before the first order - Is the destination rule for taurine in this product category confirmed, and is the Member State position documented in the EU? - Does the file state the US dietary-ingredient basis for the exact form, in writing? - Do the contaminant results cover the legal limit and the finished-product dose, not just the raw material? - Does the label avoid an unapproved functional claim, and is any permitted claim authorised in the destination register? - Is the source route documented if the label names it? - Does the pack include the COA, SDS, specification and origin statements before the first shipment? The identity tests behind the certificate are on the identity page; the route question is on fermentation versus synthetic; the release workflow is described on the quality page. The product page carries the full specification, and the UK reference covers the retained lists. ### 06 How we prove a taurine lot is taurine URL: https://nutrition.rainwoodbio.com/products/amino-acids/taurine/identity/ Reviewed: 2026-11-18 An infrared spectrum and an assay are the two lines most certificates offer as proof of identity, and on their own they are not enough. IR proves that the sample matches a reference spectrum; the assay proves how much acid or how much of the peak is present. Neither one proves that the white crystal in the drum is taurine and not a blend of taurine with glycine, sulfate or another amino acid. In one lineIdentity is a whole-spectrum match plus an impurity fingerprint; an assay on its own cannot separate the molecule from what was added around it. ## The four layers Identity is built in layers, and each layer answers a different question. The first is documentary: the name, the CAS number, the formula and the appearance on the certificate. The second is spectroscopic: an infrared spectrum compared with a reference. The third is quantitative: an assay by a method that can see the molecule. The fourth is the impurity fingerprint: the ash, the anions and the metals that describe what else is in the drum. Identity layers · what each one proves | Layer | Test | Proves | Misses | Document | Name, CAS, formula, appearance | What the lot is called | Nothing about the drum | Spectrum | IR against a reference | The functional groups and the solid-state form of the sample | A small adulterant with overlapping bands | Assay | HPLC or titration, dried basis | How much taurine the lot contains | What the remainder is | Fingerprint | Ash, chloride, sulfate, iron, metals | The inorganic load and its trend | An organic diluent such as glycine No single layer is a verdict. The documentary layer is where most disputes start, because a certificate that says “taurine” and a drum that contains taurine plus something else are both described by the same word. ## The mass balance is the first check to run Taurine is a sulfonic acid, not a carboxyl amino acid: it has an amino group and a sulfonic acid group, and it does not form a peptide bond in the usual sense. That matters for identity because the usual amino-acid tests are built around the carboxyl group. A ninhydrin spray will react with the amine, but it will also react with glycine; a titration that counts acid equivalents will count any acid in the sample. The mass balance is the check that needs no extra test. The assay is reported on the dried basis, and loss on drying, residue on ignition, chloride, sulfate and iron are reported on the same material. Those figures share a denominator, so they have to add up to something close to 100%. An assay near the top of the range with a chloride figure that leaves no room for the stated purity is arithmetically impossible unless one of the numbers is wrong or something else is unaccounted for. This is not a purity proof, but it is a consistency proof. It catches the certificate that copied a limit instead of reporting a result, the lot whose anions were measured on a different sample, and the blend whose components were assayed separately and added together. Run the sum before you read the assay. ## Spectroscopy, chromatography and crystallography IR is the identity anchor because it is a whole-spectrum comparison. Taurine shows strong sulfonate absorption that a carboxyl amino acid such as glycine does not, and the fingerprint region is sensitive to the crystal form. The limit is sensitivity: a few percent of a well-matched adulterant can hide inside the bands, and a sample pressed as a poor disc can shift the baseline enough to fail a legitimate lot. HPLC is the selective quantitative method, but taurine has no aromatic chromophore. A method must derivatise the amine or use a detector that does not depend on UV absorbance, and the certificate should name the choice. A titration is cheaper and reproducible, but it measures acid equivalents and is blind to a second acidic species. The two methods are both allowed by the specification; they are not interchangeable as identity evidence. X-ray diffraction adds the crystal dimension. It confirms that the sample is crystalline and can detect a crystalline inorganic filler such as sodium chloride or sodium sulfate, which IR may not resolve. It is not an assay, and its detection limit should be stated on the report; a “no crystalline impurity detected” line without a limit is not a result. ## The adulteration routes Adulteration routes · taurine | Adulterant | Why it appears | What catches it | Glycine | Inexpensive amino acid, white crystal, similar solubility | IR fingerprint; HPLC profile; the mass balance | Sulfate salts | Low-cost white salt that adds weight | Sulfate limit and residue on ignition | Chloride salts | Low-cost white salt, freely soluble | Chloride limit and residue on ignition | Other amino acids | Carry-over from an incomplete purification | HPLC profile and IR comparison | Sugar or starch | Bulking agent that passes appearance | IR; assay; optical rotation The inorganic routes are the easy ones to catch, because the ash limit caps how much salt can be added before residue on ignition fails. The organic routes are harder. A blend that carries a small percentage of glycine can pass the assay window and the ash limit together, which is why the IR spectrum and the chromatographic profile carry the weight that the assay cannot. ## What to write into the specification - “Taurine, 2-aminoethanesulfonic acid, CAS 107-35-7, white crystalline powder.” - “Identification: IR conforms to the reference spectrum, with the reference named.” - “Assay 98.5–101.5% on the dried basis by HPLC or titration; the method named on the COA.” - “Loss on drying ≤0.3%; residue on ignition ≤0.1%; chloride ≤0.05%; sulfate ≤0.03%; iron ≤30 ppm.” - “Heavy metals Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg.” - “Particle size 20–200 mesh; microbiological limits as specified.” ## Five questions to put to a supplier - Which reference spectrum was the IR compared with, and is the spectrum on file for this lot? - Which assay method was used, and what is the result on the as-is basis beside the dried basis? - What are the chloride, sulfate and residue-on-ignition figures for this lot, not just the limits? - Has the lot been screened for glycine or another amino acid, and by which method? - If the material is a blend or a dilution, what was added and at what percentage? A supplier who can answer these questions is describing a material; a supplier who repeats the specification is describing a catalog. The tests themselves are on the COA page, the grade and route context is on the grade page, and the spectroscopy methods are described in the FTIR and HPLC references. The product page carries the specification. ### 01 What the COA for vitamin C actually contains URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-c/coa/ Reviewed: 2026-11-18 A vitamin C certificate of analysis answers four questions: what the lot is, how much of it is L-ascorbic acid, what else is in the powder, and whether the lot is clean enough to release. The assay is only the second of those. Appearance, identification, specific rotation, pH, loss on drying, residue on ignition, oxalic acid, iron and copper, the heavy-metal panel and microbiology fill in the rest, each with a method and a release limit. In one lineAn iodometric assay confirms reducing power, not the intact molecule. The certificate has to name the method, the specific rotation and the impurity panel beside it. ## The one-page sheet The catalogue specification for this grade is fixed; the results are not. A certificate that repeats the limits without the measured values is a data sheet, not a batch record. Identity and purity · catalogue specification, L-ascorbic acid | Parameter | Release limit | What it controls | Assay (as C₆H₈O₆) | 99.0–100.5% | Reducing power, expressed as ascorbic acid | Appearance | White to off-white crystals or crystalline powder | First visual screen | Identification | IR and UV conform | Comparison with reference spectra | Specific rotation | +20.5° to +21.5° (10% solution) | Stereochemistry of the molecule | pH (5% solution) | 2.1–2.6 | Free acid in solution | Loss on drying | ≤0.5% | Water in the crystal | Residue on ignition | ≤0.1% | Inorganic residue | Oxalic acid | ≤0.2% | Organic-acid impurity Contaminants and hygiene · catalogue specification, L-ascorbic acid | Parameter | Release limit | What it controls | Iron / copper | Fe ≤2 ppm · Cu ≤5 ppm | Metals that catalyse oxidation | Heavy metals | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Elemental contaminants | Microbiology | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent | Hygiene of the lot Microbiology is reported on the same certificate: aerobic plate count, yeast and mould, E. coli and Salmonella. A lot that fails it cannot be released, whatever the assay says. ## What 99.0–100.5% is measured against The assay is a mass fraction: grams of ascorbic acid, expressed as C₆H₈O₆, per 100 g of powder. The range is tight because the molecule is small and the titration is well understood, not because the material is a pharmaceutical. A result below 99.0% means the lot contains more than 1% of something else, or the oxidation has already started; a result above 100.5% is a signal of method bias rather than exceptional purity. The CAS number 50-81-7 ties the name on the sheet to one molecule. A certificate without it is relying on the trade name, and in this family several materials can all be described as vitamin C. The rest of the sheet accounts for the mass that is not ascorbic acid. Water sits in loss on drying, inorganic residue in residue on ignition, oxalic acid is reported separately, and the metals are reported in parts per million and milligrams per kilogram. Read together, the figures should agree: a lot with a high loss on drying has less room for other impurities than a dry lot at the same assay. ## Release limit, batch result and the method A release limit is the window the lot must fall inside; a batch result is what the laboratory measured. The certificate should show both, with the method beside each. “Passes specification” is a conclusion, not evidence. The assay method matters more for vitamin C than for most powders. Iodometric titration measures reducing power: iodine is consumed by ascorbic acid, and the titre is converted to a percentage of C₆H₈O₆. It does not see dehydroascorbic acid, the first oxidation product, because that molecule no longer reduces iodine; and it counts any other reducing substance as if it were ascorbic acid. A lot can pass while part of the vitamin has already oxidised, and a lot containing a reducing adulterant can pass without the ascorbic acid the number implies. HPLC answers a different question. It separates ascorbic acid from dehydroascorbic acid and related substances, so the report shows how much of the vitamin is intact. It takes longer, and it is the method that tells you what the titration is counting. The practical answer is not to replace the titration — the catalogue assay is iodometric for a reason — but to ask for the chromatographic result when the colour, the age of the lot or the market makes the intact molecule the question. ## What changes between lots Most of the sheet is quiet from lot to lot. The assay moves within a narrow band, the rotation stays in its window if the stereochemistry is right, and the heavy metals sit far below the limits on a well-controlled route. The parameters that move are the ones tied to water, heat and time. Loss on drying follows the drying step and the pack. pH follows the residual acidity of the crystallisation liquor and the age of the material. Oxalic acid follows the oxidative history: a lot dried hot or held warm usually carries more than a lot dried gently. Iron and copper follow the equipment and the water, which is why the limits are in single-digit parts per million. Colour is the least quantitative signal and often the first to move: a cream or yellow tint on a white to off-white material is a reason to ask for the degradation picture, even when the assay is inside the range. ## When an outside laboratory earns its place Order an outside test when the source is new, when the first shipment enters a regulated market, when the label makes a form claim the supplier's sheet does not prove, or when a result is disputed. The useful panel is not a repeat of the supplier's certificate; it is the set of tests that answer the open question: HPLC for ascorbic acid and dehydroascorbic acid, specific rotation on the same sample, oxalic acid, the trace metals, and microbiology if the lot will not be heated again. Send the retained sample, the supplier's COA and the specification you are releasing against, and ask for the method and detection limit beside each result. A number without a method is not evidence, whoever signs it. ## What to compare between suppliers Put six lines side by side before comparing anything else: the form and the CAS number, the assay and its method, the specific rotation, the oxalic acid figure, the iron and copper results, and the contaminant and microbiology panel. Two quotations can agree on “99.5%” and disagree on the other five; then they are not quoting the same material. The second layer is the batch file: who manufactured the lot, which drying step was used, what the retained sample is, and whether the lot number on the certificate matches the lot number on the pouch or drum. A certificate can be accurate and still describe a lot that is not the one you will receive. For the specification behind this page, see the vitamin C product page. The form comparison is on the grade page, the method panel is on the identity page, and the chromatographic method is described under HPLC. The release workflow sits on the quality page. ### 02 Ascorbic acid, sodium ascorbate or a coated grade: choosing a vitamin C form URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-c/grades/ Reviewed: 2026-11-18 Vitamin C is sold as five different materials: L-ascorbic acid, sodium ascorbate, calcium ascorbate, coated ascorbic acid and ascorbyl palmitate. All five can be declared as vitamin C, and none of them behaves like the others in a formula. They differ in pH, solubility, taste and stability, and in how much powder a declared dose requires. The choice is a formula and label decision, not an assay decision. In one lineThe five commercial forms differ in pH, salt load, taste and stability; the formula and the label decide which one, not the assay figure. ## The same vitamin, five materials A supplement label may name the vitamin rather than the additive, but the ingredient list still has to name what is in the drum. That is why two products can both declare 500 mg of vitamin C and contain different masses of different powders. The declared figure is the vitamin C equivalent; the powder mass, the pH and the taste depend on which form was used. E300 is the food-additive identity for ascorbic acid. It is the permitted name for the additive in the EU, and it is not the only way to name a vitamin in a supplement. The market decides which convention applies; the form on the certificate decides what the formula will do. ## The five forms side by side Vitamin C forms · what changes in the formula | Form | Vitamin C per gram | pH / solubility | Taste | Stability | Fits | L-ascorbic acid | Reference: highest per gram | pH 2.1–2.6 at 5%; freely soluble | Sharp sour | Good dry; oxidises in solution | Capsules, tablets, dry sticks | Sodium ascorbate | Lower than the acid | Less acidic; highly soluble | Salty, less sour | Oxidises in solution; takes up moisture | Neutral drinks, chews, sensitive matrices | Calcium ascorbate | Lower than the acid | Less acidic; soluble | Less sour, mineral note | Same oxidation path as sodium ascorbate | Tablets where calcium is welcome | Coated ascorbic acid | Acid plus coating; assay basis stated | Coating shields the acid; disperses | Masked until the coating breaks | Coating slows matrix contact | Effervescent, gummies, mineral blends | Ascorbyl palmitate | Lowest of the five | Not an aqueous acid; fat-soluble | No sour taste in water | Different oxidation environment | Oils, softgels, emulsions Read the table by column. The content column decides the mass per dose; the pH and solubility column decides what the formula and the phase can take; the taste column decides whether the product can be chewed; the stability column decides the pack. The pattern is simple. The acid is the reference and the densest way to carry the vitamin; the salts trade some of that density for a higher pH or a second mineral; the coating trades density for a barrier; the ester trades water solubility for oil solubility. Each trade is worth making only when the formula has the problem it solves. ## What changes in the drum Three things change before the powder reaches the blender. The first is the mass per declared dose: a salt carries less ascorbic acid per gram than the acid does, so a formula built on a fixed vitamin dose needs more powder when the salt is substituted. The second is moisture behaviour: the salt picks up water more readily than the acid, which matters in a stick pack, a chew or any formula with a low water-activity target. The third is particle size and flow: the acid is supplied as crystals or a crystalline powder, and a milled or coated grade flows and compacts differently on the same press. None of these is a quality difference. They are the arithmetic and the handling of a different material, and the specification has to name them so that the next lot behaves the same way. ## What changes in the finished product For a capsule or a tablet, the acid is usually the simplest choice: it is dense, it compacts, and the dose fits a normal fill weight. The sour taste is not an issue because the capsule is swallowed. The exception is a tablet that also contains a carbonate or a sensitive mineral; there the acid can react in the blend or in the mouth, and a coated grade or a salt is the form that keeps the matrix intact. For a stick pack or a drink mix, taste is the first constraint. Ascorbic acid at a normal supplement dose is noticeably sour; sodium ascorbate is salty and much less sharp, which is why beverage formulas often use the salt and adjust the sodium declaration. Calcium ascorbate sits between the two on acidity and adds calcium to the label. For a gummy or a chew, the acid has both taste and matrix effects: it can invert sugar, attack a gel and taste sharp, so a coated grade is used where the acid would otherwise change the product during its shelf life. For an oil, a softgel filling or an emulsion, the aqueous forms are the wrong phase. Ascorbyl palmitate is the form that dissolves in the oil; its vitamin C content per gram is lower than the acid's, so the dose arithmetic changes again. ## When not to change the form If the current form passes the stability trial, the label review and the taste panel, a switch adds a new specification, a new stability file and a new label ingredient for no gain. The acid is not an inferior form; it is the reference material, and it is the form most formulas are built around. A switch is worth the work when the formula has a problem the current form cannot solve: an acid-sensitive matrix, a pH that the acid drags too low, a taste that cannot be masked, a sodium figure that is already at its limit, or a phase (oil) the acid cannot enter. The form should answer a constraint that exists, not a preference from a supplier's brochure. ## What to write into the specification - “L-ascorbic acid, crystalline, 99.0–100.5% by iodometric titration; CAS 50-81-7.” - “Identification by IR and UV; specific rotation +20.5° to +21.5° on a 10% solution.” - “Loss on drying ≤0.5%; residue on ignition ≤0.1%; oxalic acid ≤0.2%.” - “Iron ≤2 ppm; copper ≤5 ppm; heavy metals Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg.” - “Sodium ascorbate, if specified: assay expressed as ascorbic acid, sodium declared.” The last line is the one that gets forgotten. A specification that says only “vitamin C” leaves the form open, and the form is what the label, the stability file and the taste panel depend on. For the tests behind the acid specification, read the COA page. The two most common forms are compared directly on ascorbic acid versus sodium ascorbate; the regulatory side of the form is on the compliance page; the product itself is on the vitamin C hub. ### 03 Vitamin C is stable as a crystal and fragile in a formula URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-c/stability/ Reviewed: 2026-11-18 L-ascorbic acid is a stable crystal and an unstable solute. In a sealed pouch or drum, with loss on drying inside the 0.5% limit, the powder can sit with little change. Once it is dissolved, wetted or blended into a matrix that holds water, the oxidation path opens: ascorbic acid loses two electrons to become dehydroascorbic acid, and dehydroascorbic acid breaks down further to diketogulonic acid. Light, heat, moisture, trace metals and pH decide how fast that happens. In one lineThe crystal is the stable form; every step that dissolves it, wets it or exposes it to light, heat and trace metals starts the oxidation path. ## The dry crystal The specification's loss on drying of ≤0.5% is a statement about the dry state, and it is the first line of defence. Water is what allows the reaction to move: in a crystal with little free water, the ascorbic acid and the oxygen in the headspace are not in the same phase. The foil pouch and the fiber drum are part of that control, not packaging decoration. A pouch that is opened and left open loses the control; a drum that is decanted into an unlined bin loses it faster. Light and heat act on the dry powder too, more slowly. A white to off-white crystal that develops a cream or yellow tint in storage has started to change, even if the assay still reads inside the catalogue range. That is the central awkwardness of vitamin C: the number can pass while the material is no longer what it was. ## Once it is in solution In water the reaction has everything it needs. Dissolved oxygen, a trace of iron or copper, light and a pH away from the acid's stable range will take ascorbic acid down the path in a short time at ambient temperature; heat accelerates every step. The first product, dehydroascorbic acid, is no longer measured by an iodometric titration. The second, diketogulonic acid, is irreversible: the vitamin is gone, the colour has moved toward yellow-brown, and no reformulation brings it back. This is why the assay method and the stability question are the same question. A titration on a stored beverage can fall inside the release range while the chromatographic result shows that a meaningful fraction has already gone to dehydroascorbic acid. The HPLC method separates the two, and a stability protocol that uses only the titration is measuring the reducing power that is left, not the vitamin that is left. ## What drives the loss Stability factors · what moves the oxidation and what controls it | Factor | Effect | Control | Oxygen | The electron acceptor in the first step | Low headspace, nitrogen flush, barrier pack | Water | Puts the reactants in one phase | Loss on drying ≤0.5%; low water activity; sealed pouch | Light | Accelerates the reaction, UV in particular | Opaque pouch, drum, carton | Heat | Raises the rate of every step | Cool storage; short process holds | Iron and copper | Catalyse oxidation at parts-per-million levels | Fe ≤2 ppm, Cu ≤5 ppm; lined or stainless contact | pH | Changes which species is present and how fast it reacts | Keep the formula acidic where the product allows | Matrix | Alkaline or oxidising ingredients consume the vitamin | Separate addition; coated grade; reformulate the matrix The table is a ranking, not a list of equals. In a dry blend, water activity and metal contact usually decide the outcome. In a beverage, oxygen, light and heat dominate, and the headspace matters as much as the dissolved oxygen at filling. ## How to test it A stability protocol for a vitamin C product should answer four questions: how much ascorbic acid is left, how much dehydroascorbic acid has formed, what the colour has done, and whether the pack is doing its job. That means an HPLC assay for the two species, a colour or absorbance reading, loss on drying or water activity on the powder, and pH where the product is aqueous. The titration alone cannot answer the first two. Test the finished product in its commercial pack, not only the powder in a laboratory jar. Run a control at the start, then time points that bracket the intended shelf life; run one arm under accelerated conditions and one under the market's ambient conditions. Add a light-exposure arm if the pack is transparent, and a headspace arm if the filling line leaves air in the container. The result of interest is not a single number at the end but the shape of the curve: vitamin C loss is rarely linear, and the curve tells you more than the endpoint does. ## Formulation and packaging choices Five decisions do most of the work. Keep the water activity low: a dry stick pack or a capsule is a much easier home for the acid than a gel or a beverage. Add the vitamin late in the process and keep the hold time short. Keep the pH on the acid side where the product allows it, and do not neutralise the acid unless the formula needs a neutral pH for another reason. Control metal contact: iron and copper at parts-per-million levels are enough to matter, so the specification limits them and the process should not add them back through equipment or water. Use a barrier pack: foil for the pouch, a lined drum for bulk, an opaque container for the finished product. When the matrix attacks the acid — a carbonate, a gel, a mineral blend — a coated grade puts a barrier between the two. When the matrix is an oil, the aqueous forms are the wrong phase and ascorbyl palmitate is the form that dissolves. Both are covered on the grade page. ## Shelf life is a property of the pack A certificate does not establish a shelf life. The shelf life belongs to the finished product in its pack, and it is assigned from stability data on that product, not from the ingredient specification. The ingredient specification supports the assignment: a lot with a low loss on drying, a low oxalic acid figure and low iron and copper gives the formulator a better starting point, but it does not prove that a beverage will hold for a year. For bulk material, the useful questions are the retest interval, the storage condition and the pack. A drum opened in a humid room is a different material from the same drum unopened. If the powder is to be held for a long period, ask for a stability statement on the packed material and store it as the statement says. This page sits under the vitamin C product page. The assay and its limits are on the COA page, the form comparison is on the grade page, and the definition of loss on drying is in the glossary. ### 04 Vitamin C: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-c/moq/ Reviewed: 2026-11-18 Vitamin C is quoted from 1 kg, in a 1 kg foil pouch or a 25 kg fiber drum, with a lead time of 1–7 days. The 1 kg unit is not a hand-filled sample: it is a portion of a released production lot, and it travels with that lot's certificate of analysis. A quotation starts with the form, the quantity, the destination market and the documents that market requires. In one lineOne kilogram is the minimum because it is a portion of a released lot with its own COA, not a repack of an unknown batch. ## Why the minimum is 1 kg The minimum exists for traceability, not for sales. A lot is the smallest unit a manufacturer can release, test and certify, and a 1 kg pouch is the smallest pack that can be filled from a released lot without breaking that chain. The alternative — a bench sample with no lot behind it — cannot carry a COA that means anything. For the buyer, 1 kg is enough for a bench trial, a small pilot and a stability arm from a single lot, which is what a formulator needs before committing to a drum. If the trial works, the same specification can be ordered at 25 kg; if it does not, the exposure is a kilogram rather than a pallet. The same lot number should follow the pouch, the COA and the retained sample. ## Packaging Two packs are standard: a 1 kg foil pouch and a 25 kg fiber drum. The foil pouch is the light and moisture barrier for the trial and the small production run; the drum is the bulk pack, with an inner liner that keeps the powder away from the fiber wall and from the humidity the wall can carry. Neither pack is neutral. Ascorbic acid is sensitive to light and water, and a pack that lets either through shortens the working life of the powder inside it. The pack is part of the specification, not a detail of the shipping department. A buyer who specifies “25 kg drum” without saying “lined” or “food-grade” has left the barrier open. The label on the pack should carry the product name, the form, the lot number, the net mass and the storage condition; a pouch that reaches the bench without a lot number cannot be traced back to the certificate. ## Lead time The lead time is 1–7 days from the point at which the order details are confirmed. The range is wide because the clock does not start at the same point for every order: an order for the catalogue grade against the standard specification starts sooner than an order that needs a different mesh, a different pack or a market-specific document pack. If the lot needs release testing or a market-specific document pack, that work sits inside the range rather than after it. If the material is needed for a dated production run, say so when the order is placed. A lead time is a range, not a promise about a specific dispatch date; the dispatch date is confirmed with the order confirmation. ## What a quotation needs Six details turn a question into a quotation: - The form: L-ascorbic acid, sodium ascorbate, coated ascorbic acid or another grade. - The quantity and the pack: how many kilograms, and whether the 1 kg pouch or the 25 kg drum. - The destination: the market and the delivery address, because both affect documents and shipping. - The specification you intend to release against, including any tight limits on oxalic acid, iron, copper or microbiology. - The documents required: COA, TDS, SDS, allergen statement, origin statement, or a third-party certificate. - The date the material is needed, and whether a sample must be approved first. An enquiry that gives only a product name and a quantity will produce a question back, which adds a round of correspondence. The six items above are the same six the order confirmation will repeat. ## Samples A sample is a portion of a released lot, with the certificate of that lot. It is not a separate bench batch, and it should not be a different lot from the one that will ship. Ask for the lot number on the sample label and compare it with the number on the COA; if they differ, the sample proves nothing about the drum you will receive. Keep the sample under the storage condition on the label, and keep enough of it to run a second test if the first result is questioned. The retained sample is the reference in a dispute, and it is only useful if it was stored the same way as the bulk. The retained-sample note explains what a usable reference sample has to carry. ## Where the terms stop The terms of an order should settle five things: the specification and the method for each parameter, the tolerance on the assay, the pack and the label, the documents that travel with the lot, and what happens if a result falls outside the agreed limit. They should also say which market the documents are prepared for, because a COA written for one market may not contain the declarations another market requires. What the terms do not do is replace the specification. A contract that says “vitamin C, food grade” and nothing else has left the form, the method and the impurity limits to the supplier's discretion. The specification is the technical document; the order is the commercial one; both have to name the same material. For the certificate that travels with the lot, read the COA page. The form options are on the grade page, and the definitions of MOQ and lead time are in the glossary. The product itself is on the vitamin C hub. ### 05 Where vitamin C is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-c/compliance/ Reviewed: 2026-11-18 Vitamin C enters a market through more than one door. In the European Union, ascorbic acid is permitted as the food additive E300 and as a vitamin source in food supplements; in the United States it is GRAS for food use and is used as a dietary ingredient; in the United Kingdom the retained lists apply. Permission is the first check only. The contaminant limit, the label rule and the claim are separate reviews, and each has a different answer by market. In one linePermitted as E300 and as a vitamin source in the EU, and as a GRAS food ingredient and dietary ingredient in the US; the form, the limit and the label are three separate checks. ## The four checks The first check is the permitted identity: which substance, in which form, is allowed in the category the product sits in. A food additive and a food supplement are different categories, and the same substance can be permitted in both through different instruments. The second check is the contaminant limit, which is set on the product as sold. The third is the label: the ingredient has to be named in the form the market expects, and the vitamin content has to be declared in the required unit. The fourth is the claim, which is authorised separately from the ingredient. The categories matter because they change the label. A food that uses ascorbic acid as an additive names E300 in the ingredient list. A food supplement that uses it as a vitamin source may name the vitamin instead, with the percentage of the nutrient reference value. Both can be correct, in the right category, in the right market. The three markets covered here take different routes to the same question. The EU maintains a list of permitted additives and a list of vitamin and mineral substances permitted in food supplements. The US classifies ascorbic acid as GRAS for food use and as a dietary ingredient in supplements. The UK applies retained lists for additives and for the vitamins and minerals permitted in supplements; they resemble the EU lists but are a separate legal order, so the current UK legislation has to be checked before an EU document is reused. This page describes the framework as of this review; the current text in each market decides. ## European Union Ascorbic acid is permitted as a food additive under E300, and it is permitted as a vitamin source in food supplements. For a supplement, the label declares vitamin C and the percentage of the nutrient reference value; the EU NRV for vitamin C is 80 mg per day. The declaration is of the vitamin, not of the additive, and the ingredient list still has to identify the form used. Contaminants for food supplements are governed by Regulation (EU) 2023/915. The limits for a supplement as sold are 3.0 mg/kg for lead, 1.0 mg/kg for cadmium and 0.10 mg/kg for mercury. Arsenic is not harmonised at EU level, so a Member State may apply its own limit; check the destination before the label is fixed. The regulation also sets limits for other foods, and a product that is a food rather than a supplement falls under a different line of the same regulation. ## United States Ascorbic acid is GRAS for food use, and it is used as a dietary ingredient in supplements. The Supplement Facts panel declares elemental vitamin C in milligrams; the Daily Value is 90 mg for adults and children four years and older, subject to the current FDA value. The ingredient list names the source, so the form on the certificate and the form on the label have to match. There is no federal maximum level for lead in dietary supplements. That does not make lead irrelevant: California Proposition 65 sets its own thresholds and may require a warning, and a product that is inside an EU limit can still be outside a California one. The destination state and the daily dose have to be checked together. ## The contaminant table Lead, cadmium, mercury and arsenic · food supplements, by market | Element | EU | US | UK | Lead (Pb) | 3.0 mg/kg | No federal maximum; state rules such as Prop 65 may apply | Retained limit; check current UK law | Cadmium (Cd) | 1.0 mg/kg | No federal limit specific to supplements in this review | Retained limit; check current UK law | Mercury (Hg) | 0.10 mg/kg | No federal limit specific to supplements in this review | Retained limit; check current UK law | Arsenic (As) | Not harmonised; Member State rules may apply | No federal limit specific to supplements in this review | Check current UK law The ingredient specification in this catalogue carries its own limits: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg on the powder. Those are material limits, and they are not the same measurement as the product limit. The product limit applies to the supplement as sold, after the powder has been diluted by excipients and divided into doses; the two have to be checked together, especially where the vitamin is the main ingredient by weight. ## Labels and claims E300 is a food-additive identity. A supplement label may use the vitamin name instead, with the vitamin content as a percentage of the NRV in the EU or as a mass in the US. Neither convention authorises a health claim. In the EU, health claims are authorised separately and only under the conditions attached to them; in the US, a structure/function statement is the brand's responsibility and carries the DSHEA disclaimer. A disease claim is not available in either market. This site makes no health claim for vitamin C. It publishes the specification, the analytical methods and the regulatory framework; the claim, if any, belongs to the brand that puts it on the label and to the market that authorises it. ## The document pack - Batch COA with assay, identification, rotation, oxalic acid, metals and microbiology. - Specification and technical data sheet naming the form and the CAS number. - Safety data sheet in the 16-section format. - Allergen, GMO, origin and residual-solvent statements. - Statement of the regulatory basis for the intended market. - Third-party certificate, where the buyer's review requires one. ## What to check before the first order - Is the exact form permitted in the destination market, in the category the product sits in? - Do the contaminant results cover the destination limit at the intended daily dose? - Does the label name the form in the way the market expects, and declare the vitamin in the right unit? - Is the claim authorised, or is it a structure/function statement with the required disclaimer? - Does the document pack name the market it was prepared for? The market pages in the technical library expand the framework: EU regulatory notes, US regulatory notes and UK regulatory notes. The definitions of NRV and Daily Value are in the glossary, and the batch file is described on the quality page. The product itself is on the vitamin C hub. ### 06 How we prove a vitamin C lot is L-ascorbic acid URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-c/identity/ Reviewed: 2026-11-18 Identity for vitamin C is a set of four answers, not one assay. The first is the molecule: L-ascorbic acid, CAS 50-81-7, the L enantiomer and not its epimer. The second is how much of it is present, and by which method. The third is the impurity profile: oxalic acid, iron, copper and the heavy metals. The fourth is the absence of undeclared material, whether a diluent, a sugar or a salt. A certificate that reports only the assay has answered the second question and left three open. In one lineIdentity is not the assay: specific rotation, the oxalic acid figure and the trace metals together separate L-ascorbic acid from a D-isoascorbic acid substitution or a diluted lot. ## The four layers The first layer is stereochemistry. Ascorbic acid has two enantiomers and several related structures; the vitamin identity and the specification belong to the L form. The second layer is quantity, and the method behind it: an iodometric titration measures reducing power, so the number can be right while the material is not. The third layer is the impurity profile, which catches a material that has been oxidised or contaminated on the route. The fourth is the diluent: a powder can be mostly ascorbic acid and still contain a carrier, a sugar or a salt that the label does not mention. Each layer needs its own method, and the methods are not interchangeable. The rotation answers the first; the titration and the chromatogram answer the second; oxalic acid and the metals answer the third; pH and residue on ignition answer much of the fourth. ## Specific rotation: the stereochemistry check Specific rotation normalises the measured rotation for path length and concentration, so the figure is comparable only when the concentration, temperature and wavelength are stated. The specification fixes the concentration at 10% for that reason. For a pure substance the figure should not move when the concentration changes; a lot whose rotation drifts with concentration is telling you that something else in the sample is optically active. Within that defined measurement, the rotation is the most direct discrimination between the L form and a stereochemical substitution. D-isoascorbic acid, also called erythorbic acid, is the epimer: a different molecule that also reduces iodine and can therefore pass an iodometric assay. It does not share the rotation. A lot that has been partly substituted will sit outside the window of +20.5° to +21.5°, and the further the substitution, the further outside it sits. ## Spectroscopy, crystallinity and method limits The catalogue identifies the material by IR and UV, and the specification says “conform” rather than giving a spectrum. That is normal for a monograph material: the comparison is against a reference spectrum, and the report should say which reference. IR shows the functional groups; UV shows the conjugated enediol system that gives ascorbic acid its absorbance. Neither test distinguishes the L form from the D form, and neither measures how much is present. Identity tests · what each one can and cannot prove | Test | Proves | Does not prove | IR and UV identification | The functional groups and the chromophore match the reference | Purity or stereochemistry | Iodometric titration | Reducing power, expressed as ascorbic acid | Intact molecule versus oxidised; which reductant | HPLC | Ascorbic acid separated from dehydroascorbic acid and related substances | Identity of an unknown peak without a reference | Specific rotation | The L enantiomer, at the stated concentration | The amount present | Oxalic acid | The organic-acid impurity level | Whether it came from the route or from storage | Iron and copper | The oxidation catalysts at parts-per-million level | The rest of the heavy-metal panel The solid form is described as crystals or a crystalline powder, and appearance is a visual check rather than a crystallographic one. X-ray diffraction is not part of the catalogue panel. If the solid form matters to your process — dissolution, compaction, blending — ask whether a diffraction pattern can be supplied for the lot, and ask what the detection limit is. A “not detected” answer without a limit is not an answer. ## The substitution routes The first route is the epimer. Erythorbic acid is a reducing substance with similar behaviour in the titration and a different rotation; it is the substitution that a certificate reporting only the assay will miss. The second route is dilution with a sugar or a starch. The assay falls, but a sugar can also be optically active, so a rotation that looks plausible is not proof of purity; the loss on drying, the residue on ignition and the oxalic acid figure have to agree with the assay. The third route is a salt sold as the acid: sodium ascorbate in place of ascorbic acid raises the pH of the 5% solution above the 2.1–2.6 window, raises the residue on ignition and lowers the assay expressed as C₆H₈O₆. The fourth route is not a substitution but an age problem: an oxidised lot can still titrate inside the range near the lower limit while the colour and the oxalic acid figure have already moved. Each route has a different signature, which is why one test is never enough. The epimer moves the rotation; the sugar moves the assay and the residue; the salt moves the pH and the residue; oxidation moves the colour, the oxalic acid and the chromatographic result. A specification that carries all four layers can be rejected against; a specification that carries only the assay cannot. ## What to write into the specification - “L-ascorbic acid, crystalline; CAS 50-81-7; assay 99.0–100.5% by iodometric titration.” - “Identification: IR and UV conform to the reference.” - “Specific rotation +20.5° to +21.5° on a 10% solution.” - “Oxalic acid ≤0.2%; iron ≤2 ppm; copper ≤5 ppm.” - “Heavy metals Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg; microbiology APC ≤1,000 cfu/g, yeast and mould ≤100 cfu/g, E. coli and Salmonella absent.” - “HPLC result for ascorbic acid and dehydroascorbic acid on request.” The list is longer than an assay line because identity is not one measurement. A specification that names the rotation and the impurity panel gives a laboratory something to reject against; a specification that names only the assay leaves the other three layers to the supplier's judgement. ## Questions to put to a supplier - What is the specific rotation on this lot, and at what concentration was it measured? - Which assay method was used, and is there an HPLC result for dehydroascorbic acid? - What are the oxalic acid, iron and copper figures on the same lot? - Does the certificate name the CAS number and the crystalline form? - If the material is not the catalogue grade, what exactly has been substituted or added? The COA page shows where these figures sit on the certificate; the grade page covers the forms; the HPLC method explains the separation that the titration cannot make; the vitamin C hub carries the catalogue specification. ### 02.1 Ascorbic acid vs sodium ascorbate: which form fits the formula URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-c/grades/ascorbic-vs-sodium-ascorbate/ Reviewed: 2026-11-18 Ascorbic acid and sodium ascorbate are the same vitamin in two different packages. The acid is crystalline, with a pH of 2.1–2.6 in a 5% solution and a sharp sour taste. The sodium salt is less acidic, carries sodium and tastes salty rather than sharp. Both oxidise by the same path, and both are declared as vitamin C. The choice between them turns on the formula, not on the assay. In one lineSodium ascorbate trades acidity for sodium: it fits a neutral formula or a sensitive matrix, while ascorbic acid fits a dry blend or capsule where the acid has nothing to attack. ## One vitamin, two materials The declared vitamin C figure can be met with either material, provided the mass is adjusted. What changes is everything around the figure. The acid carries the vitamin in the acid molecule; the salt carries it with sodium, so a gram of salt delivers less ascorbic acid than a gram of acid. A formula built on one cannot be switched to the other without recalculating the dose and re-checking the label. The two also differ in what they do to the matrix. The acid donates protons; the salt brings a sodium ion and a pH closer to neutral. In a dry capsule, neither effect is large. In a beverage, a gel or a chew, those two differences decide the taste, the texture and the stability of the product. ## pH is the first difference The 5% solution of the acid sits at pH 2.1–2.6. That acidity is useful in some formulas and hostile in others. It gives a beverage a tart profile, it helps hold a low-pH matrix, and it will attack a carbonate, a gel or a protein that cannot take the acid. Sodium ascorbate is less acidic, so it can go into a formula that the acid would destabilise; the trade is that the formula loses the acid's own acidifying effect and has to be preserved another way. The pH also changes the taste and the mouthfeel. A drink at pH 2.5 tastes sharp; the same drink at a neutral pH tastes flat unless another acid carries the profile. A formulator who switches to the salt for pH reasons usually has to rebuild the acid profile with citric or malic acid, which is a formula change, not a substitution. ## The sodium the label carries Sodium ascorbate is a sodium salt, so every dose adds sodium to the product. That matters for a label that already declares sodium, for a product aimed at a low-sodium diet, and for a formula that is near a sodium target. The vitamin figure does not show the sodium; the ingredient list and the sodium declaration do. A switch from the acid to the salt can move the sodium figure without moving the vitamin figure, which is exactly the kind of change that slips through a label review. The salt also adds mass. The same vitamin dose needs more sodium ascorbate than ascorbic acid, which changes the fill weight, the capsule size or the stick-pack weight. In a small capsule the difference can decide whether the dose fits at all. ## Stability in the formula Both forms follow the same oxidation path: ascorbic acid to dehydroascorbic acid to diketogulonic acid. The difference is the environment each one creates. In solution, the acid keeps the pH low, and the low pH slows the reaction; the salt sits closer to neutral, where the ascorbate anion is the species present and the reaction is faster. That is an argument for the acid in a beverage, provided the formula can take the acidity. In a dry blend the picture is less about pH and more about water and metals. The salt picks up moisture more readily, so a stick pack or a chew made with the salt needs a barrier that the acid might not need. Both forms need the same control of iron and copper, and both need the same protection from light and heat. The stability question is answered by a trial on the finished product, not by the form alone. The stability page sets out the protocol. ## Taste and mouthfeel Ascorbic acid is sharply sour. At a normal supplement dose in a stick pack, it is the dominant taste, and a flavour system built around it has to work with the acidity rather than against it. Sodium ascorbate is salty and much less sour; it can blend into a savoury or mineral flavour, and it can make a fruit flavour taste flat. Calcium ascorbate is even less acidic and adds a mineral note. Coated ascorbic acid delays the acid until the coating breaks, which is how a chew or a gummy keeps a fruit flavour without the sharp edge. The taste panel is not a formality. A switch that looks neutral on the specification can change the product's taste more than any other single ingredient change. ## What the label has to say In the EU, the ingredient list names the form and the vitamin C is declared as a percentage of the 80 mg NRV. In the US, the Supplement Facts panel declares vitamin C in milligrams and the ingredient list names the source. Neither market lets the label declare the salt mass as if it were vitamin C; the declared figure is the vitamin, and the form is the ingredient. A switch from one form to the other changes the ingredient declaration and the mass, and it can change the sodium or calcium declaration; it does not change the vitamin figure if the dose is adjusted. The additive identity is a separate question. E300 is ascorbic acid as a food additive; a supplement label may use the vitamin name instead. The market and the category decide which convention applies, and the compliance page sets out the framework. ## When to choose which Choosing between ascorbic acid and sodium ascorbate | Situation | Ascorbic acid | Sodium ascorbate | Dry capsule or tablet | Fits: dense, low mass per dose | Works, but more mass and more moisture sensitivity | Acidic beverage | Fits: the acidity is part of the profile | Needs another acid to rebuild the profile | Neutral or acid-sensitive matrix | May attack the matrix | Fits: less acidic | Sodium-restricted label | Fits: no sodium from the vitamin | Adds sodium to the declaration | Chew or gummy | Sharp taste; may need a coating | Salty, less sharp; still adds mass The short answer is that the acid is the default for a dry, swallowed product, and the salt is the default for a formula that cannot take the acidity or the taste. If neither constraint is present, the acid is the simpler material, and a switch buys nothing. For the full form comparison, read the grade page; for the tests behind the acid specification, read the COA page; the product itself is on the vitamin C hub. ### 01 What the COA for zinc bisglycinate actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-bisglycinate/coa/ Reviewed: 2026-11-18 The certificate for a zinc bisglycinate lot reports appearance, zinc by complexometric EDTA, glycine by HPLC, the calculated Zn : glycine ratio, free glycine, pH, loss on drying, particle size, bulk density, the heavy-metal panel and microbiology. Every row should show the test, the method and the acceptance range used at release. The ranges on this page are the catalog specification; the batch COA is the document that confirms a particular drum. A zinc figure on its own will not prove the form. In one lineA zinc number does not identify the molecule; the certificate has to show the ligand, the ratio and the solid form as well. ## The certificate as a test report A certificate is useful when it can be audited line by line. For each parameter the reader needs three things: what was measured, which method produced the number, and which limit the lot was released against. Identity, assay and moisture · zinc bisglycinate | Parameter | Method | Release limit | Appearance | Visual | White to off-white crystalline powder | Zinc (Zn) | Complexometric EDTA titration | 26.0–28.0% | Glycine | HPLC | 59.5–64.5% | Zn : glycine ratio | Calculated from the two assays | 1.95–2.05 mol glycine per mol Zn | Free glycine | HPLC | ≤1.0% | Loss on drying | Gravimetric | ≤8.0% | pH (1% suspension) | Potentiometry | 5.0–8.0 Physical, contaminant and microbiological limits | Parameter | Method | Release limit | Particle size | Sieve analysis | ≥95% through 40 mesh | Bulk density | Tapped cylinder | 0.40–0.70 g/mL | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent ## What the zinc and glycine figures measure Zinc is reported as elemental zinc, not as the chelate. Glycine is reported as glycine by HPLC. Neither figure is a purity percentage: a supplier may describe the powder as high-purity while the elemental zinc sits inside the 26.0–28.0% window, and the two statements answer different questions. The ratio is arithmetic, not an analytical result. Convert the zinc result to moles using 65.38 g/mol, convert the glycine result to moles using 75.07 g/mol, and divide the glycine moles by the zinc moles. A true 1:2 chelate gives 2.00. The certificate's ratio is calculated from that lot's reported figures, not from the midpoint of the catalog ranges. Two cautions belong beside that calculation. First, both assays must be on the same basis: a zinc figure reported as-is and a glycine figure reported on the dried or ligand basis cannot be divided into a meaningful ratio. The certificate should state the basis for each. Second, total glycine includes free glycine. A high total glycine with a high free-glycine result is added ligand, not more chelate; the ratio should be read together with the free-glycine figure. The 1.95–2.05 release window applies only after the two results are aligned. The monohydrate carries water of crystallisation, so loss on drying checks that water and any moisture picked up in handling. The zinc result is reported on the material as sold; the hydrate state and the loss-on-drying figure belong beside the assay, not in a footnote. ## Release limit versus batch result The release limit is the acceptance boundary for the lot. What the laboratory measured on that lot is the batch result. Both belong on the page, in separate columns, with the method next to them. A result column filled with the specification range is not a result; it is a copy of the gate. Not every line needs an acceptance range. Free glycine is the usual example: a result below the 1.0% limit can still vary from lot to lot. The figure matters because free glycine is ligand that did not react. A specification that caps total glycine without a free-glycine result can be satisfied by adding glycine at the blender. The ratio is calculated, so its uncertainty is the uncertainty of both assays; it is an identity check, not a substitute for the two figures. “Passes specification” is also a conclusion, and the reader should be able to reach it from the numbers on the page. ## What moves between batches Zinc and glycine move with the reaction and crystallisation; the ligand assay reads the same reaction from the other side, so a true chelate keeps the ratio near 2.00. Drying controls loss on drying, residual liquor controls pH, and milling and sieving control particle size and density. Colour and flow are less quantitative and often more revealing. A cream or tan tint can point to a hot drying step, a trace of iron or a Maillard reaction with a reducing sugar while the zinc assay still passes; request the batch record rather than rejecting the lot on colour alone. A trend across lots — zinc drifting low, free glycine climbing — says more than one result near an edge. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a form claim the supplier's certificate does not prove, or a disputed result. The useful panel is not a full repeat: X-ray diffraction for crystalline zinc oxide, FTIR for glycine coordination, and ICP-MS for the heavy-metal panel, all on one submitted sample. Ask the laboratory to report its detection limit for the XRD oxide screen. A “not detected” line without a limit is not evidence about the sample; it is evidence about the method's sensitivity. The same principle applies to the glycine assay: the report should name the column, the detector and the basis, not only the percentage. An outside laboratory is also the sensible referee when a result is contested. Give the referee the retained sample, the supplier's certificate and the specification, and ask for the tests that separate the forms. Chain of custody matters: the sample tested should be the sample retained. ## What to compare between suppliers Put six lines side by side: form and hydrate state; zinc result and method; glycine result and basis; calculated ratio; free glycine; XRD oxide screen. Two quotations that match on zinc but diverge on the other five are not describing the same powder. The second layer is lot traceability. The lot code should be identical on the certificate, the drum and the retained sample. The certificate should also say who manufactured the lot, which zinc source was used and which drying step was applied; a correct certificate can still belong to a drum other than the one on the loading dock. The catalog specification sits on the zinc bisglycinate product page. Grades are compared on the grade page; the tests that separate chelate from blend are on the identity page; the release workflow is on the quality page. The titration itself is described in the complexometric method note. ### 02 27%, 20% or a blend: choosing a zinc bisglycinate grade URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-bisglycinate/grades/ Reviewed: 2026-11-18 Zinc bisglycinate is sold as a monohydrate at about 27% zinc, an anhydrous chelate with more zinc per gram, a spray-dried grade at about 20%, a blend with zinc oxide, and granulated or milled versions of the same powder. The grade changes the fill weight, the flow and what the label can say. The highest zinc figure is not automatically the right grade. In one lineThe dosage form and the label choose the grade; the zinc percentage on the first quotation does not. ## Why the grade is not the assay Three variables hide behind one grade name: the hydrate state, the physical presentation, and whether a second zinc source is in the drum. The zinc percentage reflects all three choices at once; it does not explain them. A 27% monohydrate and a 20% spray-dried powder can both be the same chelate at different presentations; a powder whose zinc figure sits above the chelate's ceiling is not the single chelate, whatever the label says. The question that matters is not the zinc percentage but the molecule, its hydrate and the rest of the drum. That answer sets the label, the fill weight, the press behaviour and the taste. ## The grades side by side Zinc bisglycinate grades · what changes in the drum | Grade | Zinc figure | What it is | Fits | Watch | Monohydrate | about 27% | 1:2 chelate with one water; reference grade | Capsules, tablets, sticks | Confirm loss on drying and hydrate on COA | Anhydrous | higher than monohydrate | 1:2 chelate without water | Tight fill weights; dry blends | Confirm moisture pick-up and packing | Spray-dried | about 20% | Spray-dried presentation of the chelate | Sticks, blends that need flow | Ask what the 20% is measured against and what carries the powder | Zinc oxide blend | above the chelate ceiling | Chelate plus zinc oxide | Projects that want a higher zinc figure | Not a single chelate; label must name both sources | Granulated | same as base grade | Agglomerated powder | Tablets, sachets | Confirm granulation aids and assay | Milled | same as base grade | Finer powder, 80 mesh on request | Capsules, suspensions | Caking, dust and segregation ## What changes in the drum The monohydrate is the reference grade. At about 27% zinc, 100 mg of powder carries about 27 mg of elemental zinc; a 20% grade carries about 20 mg, so the fill weight has to rise for the same dose. The arithmetic is simple, but it has to be redone deliberately. A formula built on 27% and switched to 20% without recalculating the fill weight will under-deliver the label claim. The anhydrous chelate carries more zinc per gram because it has no water of crystallisation. It can suit a formula with a tight capsule fill, provided the certificate confirms the loss on drying and the packing protects the powder from moisture. The spray-dried grade changes particle structure and flow; ask what the 20% figure is measured against and what carries the powder, because both belong in the label. Granulation and milling do not change the chemistry. They change flow, density, dust and dispersion. A granulated grade can run on a tablet press that a fine powder would choke; a milled grade can suspend in a drink where a coarse powder would settle. Either is valid if the specification names the process and any excipient. ## What changes in the finished product For capsules, the fill weight is the limit. A 27% grade fits more zinc into a small capsule than a 20% grade, which matters when the dose is high and the capsule size is fixed. Tablets add flow, density and compression: a granulated grade may help a blend that is too light, while a finer grade may need a different lubricant. Stick packs and drink mixes care about dispersion and taste more than the last decimal of the assay; a spray-dried grade can be easier to disperse, but the carrier has to be declared. Gummies and chews are a matrix problem. pH, water activity and the sugar system decide how the chelate behaves, and the taste of the zinc becomes part of the product. Formulators often choose the chelate for capsules and tablets because it is less prone to the metallic taste and gastric irritation associated with some inorganic salts; that is a formulation observation, not a health claim. The daily portion has to be checked against the destination market. Zinc has an EU upper level and labelling rules, and the US has its own Daily Value; the grade decision is also a dose decision. ## When not to change grade If the label claim is elemental zinc, the formula has room for the extra powder, and the certificate documents the form, the monohydrate is enough. The anhydrous grade earns its place only when fill weight or capsule size is the real constraint. Granulation does not improve a capsule blend that already flows, and a finer mesh does not help a tablet blend that needs density. Spray-drying is wasted on a dry blend that disperses without it. Choose the grade for a problem the dosage form actually has. Switching grade is a revalidation: fill weight, flow, taste, stability and label all move, and the new certificate must repeat the new definitions. ## What to put in the specification - “Zinc bisglycinate monohydrate, 1:2 chelate; zinc 26.0–28.0% by complexometric EDTA.” - “Glycine 59.5–64.5% by HPLC, basis stated; Zn : glycine 1.95–2.05.” - “Free glycine ≤1.0%; loss on drying ≤8.0%.” - “Particle size ≥95% through 40 mesh; bulk density 0.40–0.70 g/mL.” - “No added zinc oxide; XRD oxide screen reported with its detection limit.” A line that reads only “zinc bisglycinate 27%” leaves both the presentation and the oxide question open. The table is useful only if the certificate repeats the same definitions; otherwise the buyer is comparing a name, not a material. The parameters behind these figures are set out on the COA page. The blend route has its own page: oxide versus bisglycinate. Regulatory status is covered on the compliance page, and the full specification is on the zinc bisglycinate hub. ### 02.1 Zinc oxide vs zinc bisglycinate: what the blend hides URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-bisglycinate/grades/oxide-vs-bisglycinate/ Reviewed: 2026-11-18 Zinc oxide is about 80% zinc by mass; zinc bisglycinate monohydrate is about 27%. A blend of the two can land anywhere between those figures, including a number that looks like a stronger chelate grade. The zinc assay cannot tell the two sources apart, so the blend stays hidden unless the certificate reports the ligand and a crystal-form test. In one lineAt about 80% zinc, oxide can lift a 27% chelate to almost any figure, and the zinc assay will not say so. ## Two numbers, two materials Zinc oxide, ZnO, is about 80% zinc by mass. Zinc bisglycinate monohydrate is about 27%. The gap is chemical, not a matter of grade: an inorganic oxide on one side, an organic chelate on the other. The chelate carries a fixed 1:2 zinc–glycine ratio, and roughly three-quarters of its mass is ligand and water rather than the metal. The arithmetic is the first check on a quotation. A powder whose zinc figure sits materially above the chelate's ceiling cannot be the single chelate. It is a blend, a different salt, or a material whose assay has been calculated on a different basis. A figure inside the chelate range does not prove the chelate either: a blend can be formulated to land inside the range. The number narrows the question; it does not answer it. ## Why blends exist Blending answers three pressures. Zinc oxide carries much more zinc per gram, so a blend raises the elemental figure and reduces the mass needed per dose. It is a dense powder, so it can improve flow in a light chelate blend. And it lets a supplier offer a range of zinc figures from one chelate stock. A formulator may choose a blend deliberately: a high-zinc, low-mass powder can be the right answer for a capsule with a tight fill weight. The difficulty begins when an undeclared blend is sold under the chelate name, because the label then describes a material that is not in the drum. A declared blend with both sources on the label is a different product from an undeclared blend with one name on the certificate. ## How a blend is detected Tests that separate zinc oxide from zinc bisglycinate | Test | What it shows | Limit | Zinc assay | Total zinc | Cannot separate sources | Glycine assay | Total ligand | Includes free glycine | Zn : glycine ratio | Consistency with a 1:2 chelate | Calculated; needs both assays on one basis | XRD | Crystalline zinc oxide above the detection limit | Does not see amorphous or dissolved species | FTIR | Glycine coordination | Not a quantitative blend ratio Start with arithmetic, then go to the ligand. If the zinc figure is above the chelate ceiling, another zinc source is present. If the glycine figure is low relative to the zinc, part of the metal is not chelated. XRD then looks for crystalline zinc oxide, and FTIR for the coordination of glycine to zinc. A cloudy water dispersion is a hint, not proof; zinc oxide is practically insoluble in water, but a cloudy powder can have other causes. Evidence comes from the elemental result, the ligand result and a method that sees the solid state, taken together. ## What the label can say EU labelling requires the zinc source to be named as it appears in Annex II to Directive 2002/46/EC. Zinc bisglycinate and zinc oxide are separate entries. In a blend, both sources must appear in the ingredient list, ordered by weight. Naming only the chelate while oxide is present is a labelling defect before it is a quality defect. In the US the Supplement Facts panel declares elemental zinc; the source sits in the ingredient list. If both are present, both should be named. A consumer reading only the zinc number cannot tell which form was used. The same logic belongs in the purchase order. A purchase order for the chelate obliges the certificate to prove the chelate; an order for a blend obliges it to name the components and their proportions. An order that names only a zinc percentage has not specified a material. ## What to write into the specification - “Zinc bisglycinate monohydrate, 1:2 chelate; no added zinc oxide.” - “Zinc 26.0–28.0%; glycine 59.5–64.5%; Zn : glycine 1.95–2.05; free glycine ≤1.0%.” - “XRD: no crystalline zinc oxide detected, detection limit reported.” - “FTIR coordination reported on request.” - “If blended, declare each zinc source and its contribution; name the blender on the certificate.” Ownership of the blend declaration should be written into the specification. When blending happens after chelation, the blender becomes the manufacturer of the blend and should issue the certificate; the chelate producer's COA no longer covers the drum. ## Five questions for the supplier - Is this a single chelate, or a blend? If blended, what is in it and at what proportion? - Which zinc and glycine results belong to this lot, and on what basis were they reported? - Does an XRD report cover crystalline zinc oxide, and what detection limit does it state? - Is an FTIR spectrum available for glycine coordination? - Which hydrate is declared, and is any other zinc source present? Five direct answers amount to a specification; a single zinc percentage does not. The grade page places this question in the wider range; the identity page gives the full test sequence; the COA page shows where each figure sits on the certificate; the compliance page covers the label rules; the XRD note explains the detection limit; the product hub carries the specification. ### 03 Zinc bisglycinate is stable dry; the blend decides the shelf life URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-bisglycinate/stability/ Reviewed: 2026-11-18 Crystalline zinc bisglycinate monohydrate stores well while the pack stays sealed and dry. The weak points appear after opening, when the matrix pH moves away from the material's 5.0–8.0 suspension range, or when a reducing sugar is heated with the powder. A shelf life is a conclusion from stability data on the grade and pack, not a property of the molecule. In one lineA sealed pack protects the powder; an open pack, a shifted pH and a reducing sugar under heat are what shorten the shelf life. ## The dry powder Sealed at room temperature, the monohydrate is not expected to lose assay. Its water of crystallisation is part of the crystal, and the release limit for loss on drying defines how much additional moisture is acceptable. Once the liner is opened, the room enters the pack: humidity is absorbed, LOD rises, particles stick together and flow changes. Caking and bulk-density drift are the visible effects. A blend that ran cleanly on Monday can hang in the hopper after a damp weekend. Control is part procedural and part packaging: a food-grade liner that is genuinely sealed, a desiccant where the climate demands one, and a closing routine for the pouch and drum between weighings. ## In solution At 1% in water the suspension sits between pH 5.0 and 8.0 — mildly acidic to neutral, not alkaline like a magnesium chelate. That does not make it inert in a drink. An acidic matrix pushes solubility and taste one way; a neutral, unpreserved matrix can support microbial growth. A clear beverage needs full dissolution at the final pH; a cloudy one can accept a dispersion, but grit or sediment is a failure. Heat drives the reaction between glycine and reducing sugars. In a wet blend, a soluble second mineral can also compete for the ligand as pH shifts. Haze, colour or a taste change may appear before the zinc assay moves. Trial the real matrix at its real pH, water activity and process temperature instead of testing solubility in water at room temperature. ## What actually moves the result Stability factors · zinc bisglycinate | Factor | Effect | Control | Water | Higher LOD, caking, poor flow | Sealed liner, desiccant, dry handling | pH away from 5.0–8.0 | Solubility, taste, haze | Buffer and trial the final matrix | Reducing sugar plus heat | Browning, off-note, ligand loss | Non-reducing carrier, cooler process, water-activity control | Soluble minerals in a wet blend | Ligand exchange, haze, colour | Add in sequence; trial the blend | Iron or copper traces | Colour shift, exchange | Set limits in the specification | Light | Little direct effect on the powder | Opaque pack for retail formats ## The stability protocol The bulk study keeps powder in its commercial pack at 25 °C/60% RH and 40 °C/75% RH. Pulls are taken at the start and then at 3, 6, 12 and 24 months, with zinc, glycine, ratio, free glycine, LOD, pH, appearance and microbiology tested at each point. The warm leg is a stress condition, not a storage instruction; it exists to make a trend appear inside the study window. The finished-product study runs alongside, not instead. The capsule, tablet, stick or gummy goes into its own pack at 30 °C/65% RH and 40 °C/75% RH and is tested for assay, moisture, colour, taste and dissolution where it applies. Bulk powder can pass while the finished product fails, and the finished product is what carries the date. ## Formulation and packaging Capsules and tablets shield the powder; the remaining risks are water and the excipients. If a direct-compression blend uses a reducing-sugar carrier, run it cooler and check water activity. Granulation changes the particle surface, so the lubricant may need revisiting. A stick pack depends on its seal. Foil laminate, a continuous seam and a low moisture-vapour transmission rate are the baseline; a clear or paper format is a marketing choice that needs its own data. Gummies and chews are governed by pH, water activity and the sugar system. Glycine will take part in browning when heat and a reducing sugar are both present; removing one of those is more effective than adding an antioxidant afterwards. In a drink, pH and preservation matter more than the grade: a clear format needs solubility, a cloudy format needs suspension without sediment. ## How shelf life is assigned A shelf life is a conclusion from data, not a standard number attached to a chemical name. The TDS is expected to give the storage condition plus the retest or expiry period supported by the study. Bulk material that will be re-tested before use can carry a retest period; a consumer pack needs a date the shopper can read. Where the pack or matrix has not been studied, the defensible answer is a shorter period or a new study. A 24-month figure borrowed from another pack proves nothing about this drum, pouch, stick or gummy. The COA releases a lot; it does not predict a shelf life. The COA page lists the parameters that are followed over time. The packs a study has to cover are described on the ordering page; the quality page explains how the data are held, and the zinc bisglycinate hub carries the specification. ### 04 Zinc bisglycinate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-bisglycinate/moq/ Reviewed: 2026-11-18 Zinc bisglycinate is supplied from 1 kg, drawn from a released lot and accompanied by that lot's certificate. The 25 kg fiber drum is the production format; the 1 kg foil pouch is the qualification format. The quoted lead time is 1–7 days from confirmation, and what a quotation contains depends on grade, quantity and destination. In one lineA single kilogram drawn from a released lot is the qualification unit; grade, quantity and destination shape the quotation. ## Why the minimum is one kilogram The purpose of a small first order is to qualify a material, not to stock a shelf. A kilogram supports bench work, a pilot encapsulation or tableting run and a short stability check. It comes from a lot that has already been released, so the powder in the trial and the certificate in the file refer to the same production batch. One kilogram is a packing and documentation unit rather than a volume break. A larger order is filled from the same released lot when the lot is big enough; when it is not, a new lot is raised. The certificate always belongs to the lot that fills the drum. ## Packaging Standard packs · zinc bisglycinate | Pack | Use | Notes | 1 kg foil pouch | Trial, sample, small batch | Sealed food-grade liner; product, grade and lot on the label | 25 kg fiber drum | Production | Lined drum, tamper-evident closure, lot label visible The liner is the surface that meets the powder, so a torn liner or an unsealed drum changes the storage condition regardless of the label. A humid destination can be handled by adding a desiccant to the packing specification at the order stage. Every pack should carry the product name, grade, hydrate, net mass, lot and storage condition. If those details cannot be matched to a certificate, traceability has already failed. Open and close both formats in the same dry area. The pouch is a working pack, not a retail pack, and should be resealed between weighings; the drum liner should be closed down rather than left open. ## Lead time The quoted window is 1–7 days measured from confirmation of specification and order. That is later than the first enquiry: the clock begins when grade, quantity, packing and paperwork are settled. Milling to 80 mesh, a granulation step or an outside laboratory test adds its own time, shown separately on the quotation. Three things commonly move the date: a specification edited after confirmation, a document requested late in the process, and a destination rule that needs a licence or an additional test. Raising all three in the first exchange protects the date better than chasing it later. If there is a launch date, it belongs in the brief, not in a follow-up email. ## What the quotation needs A useful enquiry answers six questions: - Which form, hydrate and grade are wanted, or which specification is being matched? - What is the first-order quantity, and what volume is expected across a year? - Which dosage form will carry the powder — capsule, tablet, stick pack, gummy or drink? - Which destination market, and which documents does it require? - Which mesh and bulk density is the process designed around? - Is there a launch or delivery date that cannot move? A competitor's certificate can replace a written brief at the start, because it shows the tests and limits the buyer already uses. Send it and the reply will be a counter-specification: what can be met, what cannot, and what needs a trial. ## Samples A sample is taken from a released lot and travels with that lot's COA. Ask for the grade the trial will run — 80 mesh, granulated or spray-dried — not the catalog powder, or the trial will answer a different question. A sample without a certificate is a demonstration, not a qualification. The quantity should follow the trial protocol: enough capsules or tablets for the panel plus a reserve. Keep part of the sample as a reference so the trial result can later be compared with the production lot. ## Payment, claims and terms Payment terms, Incoterm and documentary requirements are confirmed in the order paperwork. Destination, quantity and whether the account is new all affect them, so no single website statement can cover every order. Claims are checked against the retained sample and the lot certificate. Report damage or a shortfall when the pack is opened, with photographs of the pack and its lot label, so the report can be tied to the lot record. The purchase order should carry grade, hydrate, mesh, pack and documents; the specification is the annex against which the certificate is checked. The COA page sets out what the certificate contains; the grade page shows what a grade change does to the order; the quality page describes the lot record. The product hub is zinc bisglycinate. ### 05 Where zinc bisglycinate is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-bisglycinate/compliance/ Reviewed: 2026-11-18 Zinc bisglycinate is a permitted zinc source for food supplements in the EU, where it appears in Annex II to Directive 2002/46/EC, and it is used as a dietary ingredient in the US, where the exact form needs a lawful basis. The UK applies a separate retained list. Permission, contaminant limits, labelling and claims are separate reviews, and this page maps them as of this review; the current legal text in the destination market decides. In one linePermission to use the form, the contaminant ceiling, the label wording and the claim are four different checks, and each market answers them differently. ## The four checks Selling a zinc bisglycinate lot into a market raises four questions that are often conflated. Is the form on that market's permitted list? Which contaminant ceiling applies to the finished supplement? Does the label name the source and declare the zinc in the required way? And is the statement being made an authorised claim, a structure/function statement, or something that is not allowed at all? The answers do not travel together. A form accepted in one country can be unlisted in another. A ceiling written for the finished product cannot be pasted onto the raw material. A sentence that is lawful as a structure/function statement in the US is not thereby an authorised health claim in the EU. ## European Union In the EU, zinc bisglycinate appears in Annex II to Directive 2002/46/EC, the list of substances permitted in food supplements. The listing opens the door; it does not close the file. Notification in the Member State of sale, the labelling requirements of Regulation (EU) No 1169/2011 and the contaminant ceilings of Regulation (EU) 2023/915 still apply, and the form printed on the label must be the form the certificate describes. For zinc, the EU reference intake is 10 mg/day, while EFSA's tolerable upper intake for adults is 25 mg/day. Both numbers matter at the dosage stage: the upper level is a ceiling, not a formulation target. A product already near that ceiling has little space for a second zinc source, which is why a blend question can become a compliance question. This is a snapshot, not a standing legal opinion. Annex II and the claim register are amended from time to time; read the consolidated text current on the day the label is approved. ## United States US law asks a different question first: is this exact form a lawful dietary ingredient? The route may be that it was marketed before DSHEA, that a GRAS conclusion covers the intended use, or that a new dietary ingredient notification is on file. The supplier should be able to point to the route and the supporting file. “Zinc is essential” is not, by itself, a legal basis for a particular zinc compound. On the panel, zinc is declared as the element; the chelate belongs in the ingredient list. For adults and children four and older, the Daily Value is 11 mg. Lead has no federal maximum written specifically for supplements, so California's Proposition 65 and the daily dose may decide whether a warning is needed. ## The contaminant table Contaminant limits · EU food supplements, with US and UK positions | Element | EU | US | UK | Lead | 3.0 mg/kg | No federal maximum specific to supplements; Prop 65 may apply | Check current UK legislation | Cadmium | 1.0 mg/kg | Check federal and state law | Check current UK legislation | Mercury | 0.10 mg/kg | Check federal and state law | Check current UK legislation | Arsenic | Not harmonised; Member State limits possible | Check federal and state law | Check current UK legislation The EU column is written for the supplement as sold. It does not tell a buyer what number belongs on a raw-material specification; that has to be derived from the daily dose and the share of the formula the ingredient occupies. Arsenic has no harmonised EU number, so a Member State may set its own. This table is a map of where to look, not a legal opinion; confirm the current text for the destination and the dose. The UK keeps a retained equivalent of the Annex II list, but it sits in UK law rather than EU law. A UK launch needs its own check of the current UK text, including any divergence in contaminant or labelling rules; the UK column above is a prompt to look, not a statement that the EU numbers apply unchanged. The EU, US and UK regulatory notes expand each market. ## Claims and labelling The EU claim register under Regulation (EU) No 432/2012 contains zinc statements that may be used only with their attached conditions. They are statements about normal function, not about disease. In the US, a structure/function statement is written and substantiated by the brand and must sit beside the DSHEA disclaimer. A disease claim is outside both frameworks. Nothing on this site is a claim for the ingredient. The specification and the regulatory map are published here; the label sentence belongs to the brand, and the evidence for it belongs in the brand's file. ## The document pack A complete lot file usually contains: - A lot COA covering zinc, glycine, water, contaminants and microbiology. - A TDS and purchase specification naming the form and the hydrate. - An SDS following the 16-section format. - Statements on allergens, GMO status, origin and residual solvents. - The US dietary-ingredient basis, where the market requires it. - An independent COA when the buyer's review calls for one. Every document should carry the lot number or point to it. A generic TDS and a lot-specific COA are not a matched pair unless grade, form and pack agree. ## What to check before the first order Five questions to settle before the purchase order: - Is this exact form permitted where it will be sold, and do label and COA name the same hydrate? - Are the contaminant figures below the destination ceiling at the actual daily dose? - Does the ingredient list disclose every zinc source, including oxide in a blend? - Is the label statement inside the authorised wording, or a properly disclaimed structure/function statement? - Is the dietary-ingredient basis documented, and is the whole file tied to the lot? The identity page explains how a blend is detected, and the COA page shows the parameters the file has to support. The zinc bisglycinate hub carries the catalog specification, and the quality page shows how the lot file is put together. ### 06 How we prove a zinc bisglycinate lot is the chelate, not a blend URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-bisglycinate/identity/ Reviewed: 2026-11-18 A zinc bisglycinate lot can be called the chelate only when four things agree: the 1:2 zinc–glycine form, the ligand ratio measured on that lot, the crystal evidence, and a composition that discloses everything in the drum. The zinc assay answers one part of one question. Glycine, free glycine, XRD and FTIR are what close the rest. In one lineA zinc number is not an identity. The form, the ligand ratio and the crystal evidence have to agree before the lot can be called the chelate. ## The four layers Layer one is what the molecule is: a monohydrate of the 1:2 zinc–glycine chelate, not an oxide, carbonate, sulfate or gluconate. Layer two is stoichiometry: two ligand molecules for every zinc, measured on the lot in question. Layer three is the solid state: the hydrate and the presence or absence of crystalline zinc oxide. Layer four is disclosure: nothing else in the drum — carrier, second zinc source, residual solvent — that the paperwork omits. These are separate questions for a reason. One laboratory result can close one layer and leave the other three open. ## The ratio is the simplest check One zinc, two glycines, one water: that is the monohydrate. The zinc titration counts the metal; the glycine HPLC counts the ligand. Divide the molar amount of glycine by the molar amount of zinc, and a true 1:2 material lands near 2.00. The released range of 1.95–2.05 exists to absorb method variation, not to accommodate a different molecule. A calculated number inherits the errors of both inputs, and it also inherits their bases. Zinc reported as-is cannot be paired with glycine reported on a dried basis. Free glycine is the other half of the ligand picture: total glycine counts both bound and unbound, so a high total with a high free figure means extra glycine was added, not that more chelate is present. Conversely, normal zinc with low glycine suggests a second zinc source or a carrier. That is why a specification needs zinc, glycine and free glycine as three separate lines, with the ratio as the arithmetic that connects them. ## XRD, FTIR and the crystal form Identity tests · what each one establishes and where it stops | Method | What it establishes | Where it stops | EDTA titration | Total zinc in the sample | Does not identify the ligand or the counter-ion | Glycine HPLC | Total glycine | Bound and free glycine are not separated | Zn : glycine calculation | Agreement with 1:2 stoichiometry | Cannot exclude a second zinc source by itself | X-ray diffraction | Crystalline zinc oxide above the reported limit | Blind to amorphous or dissolved species | FTIR | Glycine–zinc coordination | Does not give blend percentages | Loss on drying / TGA | Water and hydrate behaviour | Cannot resolve a mixed hydrate For crystalline zinc oxide, XRD is the most direct evidence available. Its value depends on the detection limit, which varies with instrument and preparation, so a report that says “absent” without a limit does not answer the question. FTIR looks at the same sample from the ligand side: the spectrum of a reacted chelate differs from that of a dry mix of oxide and chelate. Neither test replaces the other, and a chelate claim is strongest when both are on file. XRD can also reveal crystalline chelate phases, which helps with hydrate identification. It will not quantify an amorphous second source, so the elemental and ligand assays remain in the set. ## The adulteration routes A common substitution is zinc oxide. It lifts the elemental figure, reduces the chelate share of the drum and often improves flow. The zinc result can pass while the ratio drifts, and XRD may find crystalline oxide. A different zinc salt changes solubility and pH as well as the ratio. Added glycine lifts both total and free glycine and can mask the ratio if only the total is read. A hydrate switch keeps the same molecule but changes the zinc per gram, which shows up in LOD and assay together. A carrier dilutes both zinc and glycine and may leave the ratio untouched. No single test covers all five. The release set has to combine the elemental assay, the ligand assay, the free-ligand figure and at least one solid-state method, so a lot that passes zinc but fails the ligand cannot be released. ## What to write into the specification - “Zinc bisglycinate monohydrate, 1:2 chelate; no added zinc oxide.” - “Zinc 26.0–28.0% by complexometric EDTA; glycine 59.5–64.5% by HPLC, with the basis stated.” - “Zn : glycine 1.95–2.05; free glycine ≤1.0%.” - “Loss on drying ≤8.0%; hydrate named on the certificate.” - “Particle size ≥95% through 40 mesh; bulk density 0.40–0.70 g/mL.” - “XRD: no crystalline zinc oxide detected, with the detection limit reported; FTIR coordination on request.” The clause that matters most is the one about added oxide. If the material is blended after the chelate is made, the blender owns the blend and should issue the certificate; the chelate maker's COA no longer describes the drum. ## What to ask the supplier - Is the lot one chelate, or a blend? If blended, what is in it and in what proportion? - What zinc and glycine results belong to this lot, and on what basis was each reported? - What ratio do those results calculate to, and what is the free-glycine figure? - Does an XRD report cover crystalline zinc oxide, and what limit does it quote? Is there an FTIR spectrum? - Which hydrate is declared, and is any carrier or second zinc source present? Five clear answers amount to a specification. A single zinc percentage does not. The COA page shows where the results sit on the certificate; the grade page works through the hydrate arithmetic; the blend question is handled on the oxide versus bisglycinate page; the XRD note and FTIR note describe the methods; the product hub carries the specification. ### 01 What the COA for glycine actually contains URL: https://nutrition.rainwoodbio.com/products/amino-acids/glycine/coa/ Reviewed: 2026-11-18 A glycine certificate reports identity by IR, assay by titration on the dried basis, loss on drying, residue on ignition, chloride, the heavy-metal panel, microbiology and particle size. Each line needs its method and its release limit; the catalog range is not a batch result. The lot code on the certificate has to match the drum and the retained sample, or the document describes a different lot. In one lineA glycine assay is only meaningful with its method, its drying basis and the chloride figure beside it. ## The certificate, line by line For each parameter the reader needs the test, the method and the release limit. The tables restate the catalog specification; the batch COA carries the result for a particular lot. Identity, assay and purity limits · glycine | Parameter | Method | Release limit | Appearance | Visual | White crystalline powder | Identification | IR spectroscopy | Spectrum conforms to reference | Assay (dried basis) | Titration | 98.5–101.5% | Loss on drying | Gravimetric | ≤0.2% | Residue on ignition | Gravimetric, ignition | ≤0.1% | Chloride | Titration or ion chromatography | ≤0.1% Contaminant, microbiological and physical limits | Parameter | Method | Release limit | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh Chloride marks a salt load or an acid-wash residue, and it is one place where a technical-grade material can show its provenance. Residue on ignition measures the inorganic mass left after burning, catching salts that titration of the amino group will not see. ## Titration, HPLC and the dried basis Glycine is amphoteric: it has a carboxyl group and an amino group, and its 5% solution sits close to neutral. The release assay is an acid–base titration, run in a non-aqueous system so the weak amino group gives a sharp end point; the result is calculated after correcting for loss on drying. That is what “98.5–101.5% on the dried basis” means. A result above 100% is not extra purity; it is the normal uncertainty of a titration around the equivalence point. Titration measures acid–base equivalents, not a separation. Another amino acid with a similar equivalent weight can consume titrant, and a salt that does not react can still dilute the sample. HPLC is the second view: it separates glycine from other amino acids and from glycine derivatives. Glycine has no strong ultraviolet chromophore, so the method usually needs derivatisation or a detector such as refractive index, evaporative light scattering or low-wavelength UV. The certificate should name the column, the detector and the sample preparation, not only the percentage. The basis is part of the result. Dried basis means the assay is corrected for the water measured by loss on drying; as-is basis includes that water. At the catalog limit of ≤0.2% the correction is small, but it is not zero, and a dried-basis result cannot be compared with an as-is limit. The certificate should print the LOD and the basis beside the assay. ## The limit column and the result column The release limit is the acceptance boundary. The batch result is what the laboratory measured on that lot. Both belong on the certificate, in separate columns, with the method beside them. A result column filled with the specification range is not a result; it is a copy of the gate. What the result column should show | Parameter | Release limit | Result entry | Assay, dried basis | 98.5–101.5% | The lot's titration figure, with the LOD used | Loss on drying | ≤0.2% | The lot's gravimetric figure | Chloride | ≤0.1% | The lot's figure and the method A certificate that reports only “conforms” asks the buyer to trust the conclusion without the evidence. The heavy-metal panel needs the same: four numbers, their limits and the method. If a result is below the reporting limit, the limit of quantification should be printed beside it. ## What moves from lot to lot Assay moves with the crystallisation and drying step, but the catalog window is narrow and a well-controlled lot sits near the middle. Loss on drying is more variable because it depends on the drying end point and on the pack: a lot that is on specification at release can pick up moisture in an open drum. Chloride and residue on ignition move with the process water, the acid step and the crystallisation; a trend upward is more informative than a single result near the limit. Particle size and colour are the physical lines; a mill or sieve change is visible before the assay moves. Colour is less quantitative: a cream or tan tint can point to a hot drying step or a trace of iron, and in a blend it can be the first sign of a Maillard reaction with a reducing sugar. Request the batch record rather than rejecting on colour alone. ## When an outside laboratory helps Order an independent test for a new source, a first shipment into a regulated market, a grade claim the certificate does not prove, or a disputed result. The useful panel is not a full repeat: IR for identity, HPLC for the amino-acid profile, chloride and residue on ignition for the salt load, and ICP-MS for the heavy-metal panel, all on one submitted sample. Ask the laboratory to report its detection and quantification limits. A “not detected” line without a limit says something about the method, not about the sample. The same principle applies to the assay: the report should name the titration system or the HPLC column and detector, and state the basis. When a result is contested, give the referee the retained sample, the certificate and the specification under a documented chain of custody. ## Six lines to compare between suppliers Put six lines side by side: assay result and method; basis and LOD; chloride; residue on ignition; heavy metals; microbiology. Two quotations that match on the assay but diverge on the other five are not describing the same powder. Add particle size and the declared grade if the material is going into a capsule or a stick pack. The second layer is traceability. The lot code should be identical on the certificate, the drum and the retained sample; the certificate should name the manufacturer, the grade and the pack. A correct certificate can still belong to a drum other than the one on the loading dock. The catalog specification sits on the glycine product page; the tests that separate grades are on the grade page; the identity sequence is on the identity page; the release workflow is on the quality page. The IR identity test is described in the FTIR method note, and the assay definition is in the assay glossary entry. ### 02 Food-grade, technical-grade or granulated: choosing a glycine grade URL: https://nutrition.rainwoodbio.com/products/amino-acids/glycine/grades/ Reviewed: 2026-11-18 Glycine is sold as food grade, technical grade, crystalline 40 mesh, milled 80 mesh and granulated. The grade changes the document set, the chloride and residue limits, the particle size and the flow, not the molecule. Choose the grade by the dosage form, the market and the specification you can defend, not by the assay alone. In one lineFood grade and technical grade can share an assay range and still differ in the lines a supplement file depends on: chloride, residue on ignition, heavy metals, microbiology and traceability. ## Why the grade is a specification question Food grade and technical grade are commercial descriptions, not one harmonised legal status. A food-grade lot is made and tested against food law and comes with the documents a food or supplement buyer needs: a specification, a batch certificate with methods, contaminant and microbiology results, and statements on allergens, GMO status and irradiation. A technical-grade lot is intended for industrial use; its certificate may cover the assay and the physical form and stop there. The word “grade” on a quotation is therefore a claim about a file, not a purity number. Both grades can be the same molecule, and a technical plant can run a tight assay. The difference that matters at audit is whether the impurity panel, the microbiology and the traceability were generated for food use and are available for the lot in the drum. ## Food, technical and granulated side by side What changes between glycine grades | Line | Food grade | Technical grade | Granulated food grade | Assay, dried basis | 98.5–101.5% by titration | May be similar; confirm the basis | 98.5–101.5% by titration | Chloride | ≤0.1% | Check; may be wider or not reported | ≤0.1% | Residue on ignition | ≤0.1% | Check the figure and the method | ≤0.1% | Heavy metals | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Panel may not be reported | Same as food grade | Microbiology | APC ≤1,000; yeast and mould ≤100; E. coli and Salmonella absent | Panel may not be reported | Same as food grade | Particle size | ≥95% through 40 mesh | Variable; check the sieve | Granulated to the agreed distribution | Documentation | Food-grade COA and statements | Industrial COA | Food-grade COA plus granulation record Read the table down, not across. The assay row is the one that looks reassuring; the rows below it are the ones that decide whether the material can enter a supplement. “Not reported” is not the same as “absent”, and it is not the same as “within limit”. ## Particle size, granulation and flow The catalog form is a crystalline powder with at least 95% passing 40 mesh, which is about 425 µm. A milled 80 mesh grade, about 180 µm, is available on request, and granulation is a third option. The sieve figure is a release limit, not a description: two powders can both pass 40 mesh and behave differently in a hopper because the particle-size distribution and the shape are different. Granulation binds fine crystals into larger particles. It reduces dust, improves flow and makes a stick pack or a tablet press easier to run. It does not change the assay, but it can change the dissolution rate and the mouthfeel, so the granulated grade needs its own particle-size and flow lines. Milling goes the other way: a finer powder dissolves faster and can be more cohesive, which is a problem in a low-dose capsule or a dry blend. The useful choice is the one the process can run repeatably. ## What the grade changes in the dosage form The assay basis changes the weighed amount. A 98.5–101.5% dried-basis specification is corrected for loss on drying; a formulator who weighs against an as-is figure without the LOD is using a different number. At the catalog limit of ≤0.2% the gap is small, but it is large enough to matter in a low-dose stick pack and it is a common source of a label reconciliation error. Chloride and residue on ignition are the other two lines that move when the grade moves. Chloride is a marker for a salt load or an acid step; residue on ignition is the inorganic mass left after ignition. Neither measures glycine, but both dilute the active mass and both belong in the grade specification. In a capsule or tablet, the grade also sets flow, compression and content uniformity; in a powder stick or beverage, it sets dispersion and clarity. In a gummy or chew, heat and water are added to the process, so the reducing-sugar profile of the other ingredients becomes part of the grade decision. ## What to write when you switch grade A grade change is a specification change, even when the assay range stays the same. Write the grade name, the assay method and basis, chloride, residue on ignition, heavy metals, microbiology, particle size or granulation, the pack and the documents required with each lot. If the new grade is technical, do not carry the food-grade specification across without checking that every line is still tested. - “Glycine, food grade, CAS 56-40-6; assay 98.5–101.5% by titration on the dried basis.” - “Chloride ≤0.1%; residue on ignition ≤0.1%; loss on drying ≤0.2%.” - “Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg; microbiology as specified.” - “Particle size: ≥95% through 40 mesh, or granulated to the agreed distribution.” - “Each lot: batch COA with methods, allergen, GMO and irradiation statements, pack and lot code.” When not to switch: do not move a food or supplement product to a technical grade because the assay matches; the document set is the product. Do not move a fast-dissolving stick pack to a granulated grade without a dissolution check, and do not move a dusty blend to a finer milled grade without checking flow and content uniformity. The product hub carries the catalog form; the COA page shows the test lines; the food-versus-technical page follows the document gap; the particle-size note explains the sieve figure. ### 02.1 Food-grade vs technical-grade glycine: what the label cannot see URL: https://nutrition.rainwoodbio.com/products/amino-acids/glycine/grades/food-vs-technical/ Reviewed: 2026-11-18 Food-grade and technical-grade glycine can carry the same 98.5–101.5% assay and still be different materials for a supplement file. The difference is the supply chain, the test panel and the documents behind the lot, not the headline purity. A label that says glycine cannot show which chain the drum came from; the specification and the certificate have to. In one lineThe assay can be identical while the impurity profile, the microbiology and the traceability file are not; that gap is what the grade label hides. ## What the two grade names claim Food grade and technical grade are commercial descriptions, not one harmonised legal status. Food grade claims that the material is made and tested for food use and is supported by a food-safety file. Technical grade claims that the material meets an industrial specification; it says nothing about food-contact suitability, microbiology or the statements a supplement buyer needs. The same production line can supply both, with different finishing, testing and documentation. The grade name is therefore a starting point for the file, not a conclusion. A technical-grade certificate that reports a tight assay is not evidence of food suitability, and a food-grade label without the panel behind it is a word on a quotation. ## Two supply chains behind one molecule The food chain usually runs through a producer or distributor that holds a food-safety system, issues a food-grade specification and certificate, and can supply allergen, GMO and irradiation statements. The technical chain runs through industrial distribution, where the certificate may cover assay, particle size and moisture and stop there. The two chains can meet at the same crystallisation plant, which is why the lot code and the manufacturer name matter more than the brand on the drum. Packaging differs as well. A food-grade lot is packed in a food-contact liner and a closed unit that can be traced; a technical lot may be packed for industrial handling with less attention to the liner and the storage statement. Neither pack is automatically wrong for its own use; only one is designed for a food or supplement file. ## The documents that separate them Document set by grade | Document | Food grade | Technical grade | Specification with methods | Expected | May be assay and physical only | Batch COA with lot code | Expected | Expected, but panel may be shorter | Heavy-metal panel | Expected | May be absent | Microbiology | Expected | May be absent | Allergen, GMO, irradiation statements | Expected | Usually absent | Food-contact packaging declaration | Expected | May be absent | Traceability from manufacturer to drum | Expected | May stop at the distributor “May be absent” is the point of the table. It is not a statement that every technical lot is contaminated; it is a statement that the file does not answer the question. A buyer who needs the line cannot substitute a conversation for the document. ## The same assay, a different meaning The assay is a titration of the amino group on the dried basis. It measures acid–base equivalents, not the full composition. A technical lot and a food lot can both sit inside the same assay range and still differ in chloride, residue on ignition, heavy metals and microbiology. The assay is a necessary line; it is not a grade marker. This is why a comparison that stops at the assay is misleading. Two quotations can show the same percentage and describe different materials, different test panels and different supply chains. The next lines on the certificate are the ones that decide whether the material can enter a supplement. ## Where the profiles diverge Impurity lines that can differ at the same assay | Line | Why it matters in a supplement | What it catches | Chloride | Salt load or acid residue; dilutes active mass | Hydrochloride, chloride salts | Residue on ignition | Inorganic mass that is not glycine | Sodium, potassium and other salts | Heavy metals | Contaminant exposure from the daily dose | Process and raw-material metals | Microbiology | Risk in a ready-to-mix powder | Poor hygiene or wet processing | Colour and odour | Signals a hot dry or a reaction | Process deviation, Maillard onset The same assay with a higher chloride or ash figure means more of the weighed powder is not glycine. The same assay with a missing micro panel means the buyer has no evidence for a line that matters in a powder stick. The same assay with a colour difference can point to a drying step that the certificate does not describe. ## Five questions for a sourcing file - Which grade is this lot, and which specification version and test panel apply to it? - Can you send the full COA with methods, not only the assay percentage? - What are the chloride, residue-on-ignition, heavy-metal and microbiology results for this lot? - Is the material food-contact compliant, and are allergen, GMO and irradiation statements available? - Can you trace the lot from the manufacturer to the drum and the retained sample? Ask for the answers in writing and compare them with the certificate. A supplier who can answer the five questions has a file; a supplier who answers only the assay has a number. ## What to write into the purchase order Name the grade and the specification version, and attach the panel: assay and basis, chloride, residue on ignition, heavy metals, microbiology, particle size and the statements required. State that the certificate must carry the same lot code as the drum and that the pack must be food-contact. If the answer to any of the five questions is missing, the order is not specified yet. Do not accept a technical grade for a food or supplement product because the assay matches. Do not accept a food-grade word without the panel. The product page carries the catalog specification; the grade page compares the physical forms; the COA page explains the test lines; the compliance page lists the market file; the quality page covers release and traceability. ### 03 Glycine is stable dry; reducing sugars and moisture are the risk URL: https://nutrition.rainwoodbio.com/products/amino-acids/glycine/stability/ Reviewed: 2026-11-18 Dry glycine is chemically stable in a sealed pack. The failure modes are physical and formulation-driven: moisture pickup leads to caking, and moisture plus a reducing sugar and heat leads to Maillard browning. The pack, the dose-room humidity and the sugar profile belong in the stability plan, not in a footnote. In one lineThe molecule is not the weak point: moisture, a reducing sugar and heat are what change a glycine blend. ## Dry stability and the moisture headroom The catalog limit for loss on drying is ≤0.2%, which is a tight window. That number is not only a purity line; it is the moisture headroom in the pack. Glycine is hygroscopic, so an open pouch or a drum liner that is not resealed will pick up water from the room. The first visible result is caking: crystals bind into lumps that no longer flow through a hopper or disperse in a stick pack. The assay may still pass on a dried basis, because the water is corrected out, which is why LOD has to be read as its own line. The dry powder is not a significant Maillard substrate until water is present. Keep the pack closed, keep the dose room below the humidity at which the powder picks up water, and specify the liner. A desiccant can help a small pack, but it is not a substitute for an intact liner on a 25 kg drum. ## In solution: pH, heat and microbiology Glycine is freely soluble in water, and a 5% solution is close to neutral. That is convenient for a beverage or a drink mix, but a solution is a different stability environment from a powder. The molecule itself is not the limiting factor; the water activity, the pH and the microbial load are. An unpreserved solution held at room temperature is a microbiological risk regardless of the glycine assay, and a heat step adds the Maillard reaction if a reducing sugar is present. pH moves the reaction rate. Maillard browning is faster as the system becomes alkaline and slower in acid, so a beverage's pH and its buffering capacity belong in the trial. Glycine is amphoteric, but at its isoelectric point it is a weak buffer; it is not a substitute for a designed buffer system. Measure pH before and after the heat step, not only on the bench mix. ## What moves the powder and the blend Stability factors for glycine powder and blends | Factor | Effect | Control | Moisture | Caking; enables Maillard chemistry | Intact liner; low-humidity dose room; LOD limit | Reducing sugars | Browning and flavour drift under heat | Choose carriers and flavours with a low free-sugar load | Heat and time | Faster browning and colour change | Set the process time and temperature on the real matrix | pH | Alkaline conditions accelerate browning | Measure and control the finished-product pH | Trace metals | Can catalyse colour formation | Specify heavy metals; check process water and equipment | Microbiology | Growth in a wet or poorly preserved system | Water activity, preservative system, micro limits Oxygen and light are lower on this list than for a vitamin or a fatty acid. The glycine molecule has no sensitive chromophore or labile double bond, so the pack is mostly a moisture barrier. The exception is a blend: the other ingredients can be light- or oxygen-sensitive, and the pack has to protect the weakest component, not glycine alone. ## A stability protocol that answers the question Run the study on the packed material, not only on the powder in a laboratory jar. Use at least two pack sizes if the 1 kg pouch and the 25 kg drum will both be sold, and include an open-pack condition to measure moisture pickup. Store at the intended conditions and at an accelerated condition; test assay, LOD, appearance and colour, pH where the product is a solution, microbiology and flavour or odour at each time point. Five points across the intended shelf life are more useful than one end point. Add a stress sample with a known reducing sugar if the formula contains one. A bench mix held at the process temperature for the process time will show whether the colour and flavour change before the assay does. Photograph the colour against a standard; “slightly darker” is not a result. ## Formula and pack decisions At the formula stage, the question is which ingredients bring reducing sugars and water. Fruit powders, honey, some maltodextrins, caramel colours and certain flavours can carry free glucose or fructose. A sugar-free claim is not the same as a reducing-sugar-free formula. Choose carriers and flavours with a low free-sugar load, keep the water activity low, and control the heat step. At the pack stage, the 1 kg foil pouch and the 25 kg fiber drum are the catalog formats. Both need an intact liner and a closure that survives transport; the drum should be resealable after sampling. The storage statement on the label should match the pack and the climate, and the batch record should show the pack and the lot code. ## Shelf life and the early warnings The catalog specification does not assign a shelf life; the packed-product data does. A shelf life is supported by real-time results on the same pack, closure and formula, with accelerated data as supporting evidence, not as the only evidence. Do not extend a shelf life because the assay still passes: caking, colour and flavour can fail before the titration moves. The early warnings are LOD climbing, lumps forming, a cream or tan tint, and a flavour shift in a sweet blend. Any of those should trigger a retest and a look at the pack and the storage history. The product page gives the catalog form; the COA page shows the LOD line; the grade page covers granulation and flow; the loss-on-drying note explains the test; the quality page covers release and retest. ### 04 Glycine: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/amino-acids/glycine/moq/ Reviewed: 2026-11-18 The minimum order is 1 kg, packed in a foil pouch; commercial volumes ship in 25 kg fiber drums. Lead time is 1–7 days for a released lot, and it moves with the grade, the pack and the documents required. A quotation needs the grade, the quantity, the destination, the application, the documentation and the required date. In one lineOne kilogram is the qualification unit: enough to run the trial, keep a retain and prove the lot before a drum is ordered. ## Why the minimum is 1 kg One kilogram is the qualification unit, not a retail pack. It is enough to run a bench trial, make a pilot batch, keep a retained sample and send a portion to an outside laboratory. It is also small enough to be drawn from a released lot, so the sample and the later drum can carry the same specification and the same test panel. The minimum is a quality decision before it is a commercial one. A smaller scoop from a drum would not give the same traceability. A 1 kg pouch can be labelled with the lot code, sealed and retained; a repack from an unknown drum cannot. If the trial succeeds, the commercial order can move to the 25 kg drum with the same grade and specification. ## Packs and labelling Catalog packs for glycine | Pack | Typical use | What to check | 1 kg foil pouch | Trial, sample, small batch | Seal, liner, lot code, storage statement | 25 kg fiber drum | Production | Inner liner, closure, net weight, transport integrity The foil pouch is the barrier for a hygroscopic powder; the drum is the handling unit. In both cases the liner is part of the pack, not a detail. Ask for a photo of the packed unit and the label before shipment if the material is going into a regulated file. The label should carry the product name, the grade, the lot code, the net weight and the storage statement, and the certificate should carry the same lot code. ## Lead time and what moves it The catalog lead time is 1–7 days for a released lot. The clock starts when the grade, the specification, the quantity and the documents are clear; a query about the assay basis or the chloride limit restarts it. A non-standard pack, a granulated grade, a milled 80 mesh grade, or a destination that needs a specific certificate or statement adds time. Lead time is not a promise about a future production lot. If the grade is not in stock, the schedule depends on the production run and the release testing, and that should be confirmed in the quotation rather than assumed from the catalog figure. ## Six details a quotation needs What to send with a quotation request | # | Detail | Why it changes the answer | 1 | Grade and form | Food, technical, 40 mesh, 80 mesh or granulated | 2 | Quantity and pack | 1 kg pouch, 25 kg drum or a mixed schedule | 3 | Destination and delivery term | Sets the documents and the transport route | 4 | Application and dosage form | Capsule, tablet, stick pack, beverage or gummy | 5 | Documents and tests | COA, statements, third-party report, sample retention | 6 | Required date | Separates a stock lot from a production run Add the specification version if you have one. A quotation against a different assay basis or a different chloride limit is not comparable with the one you are holding. ## Samples and retained samples A 1 kg order can serve as the sample. Ask for the lot code, the batch COA and the pack label with it, and keep a portion sealed as the retained sample. The sample should come from the same lot as the commercial pack, not from a separate “sample stock” with no traceability. If the sample is sent to an outside laboratory, record the lot code, the date and the tests requested. The laboratory's report and the supplier's certificate should describe the same material; if they do not, the lot code is the first thing to check. ## Terms that belong in the purchase order The quality terms should be in the purchase order, not only in the quotation: the specification version, the grade, the pack, the lot code on the certificate, the documents required with each shipment, the storage statement, the retest or shelf-life basis, and the procedure for a nonconforming lot. Delivery terms, payment terms and title are commercial terms and belong in the same document. Agree what happens if a result is disputed: which retained sample is used, which laboratory is the referee, and who holds the sample. A clear term before the first drum is simpler than a dispute after it. The product page carries the catalog packs; the COA page shows the test lines; the compliance page lists the documents; the MOQ note defines the term; the logistics page covers delivery. ### 05 Where glycine is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/amino-acids/glycine/compliance/ Reviewed: 2026-11-18 Glycine is a food ingredient and an amino-acid ingredient in food supplements. The EU and UK route is general food law, with member-state rules to check; the US route is DSHEA. The file has to show the form, contaminants, label and claim boundary for the market where the product is sold. In one lineThe permitted-use question is answered by the market's instrument, but the file is what proves the lot: specification, certificate, contaminants, label and claims. ## Three markets, three instruments The markets do not use the same route. The EU and UK rely on general food law, with national rules for amino acids in some member states; the US regulates glycine as a dietary ingredient under DSHEA. A specification adequate for one market is not automatically adequate for another, and a “food grade” certificate is a supplier claim, not an authorisation. The instrument behind each market | Market | Main instrument | What it decides | EU | General food law; Directive 2002/46/EC for supplements; Regulation (EU) 2023/915 for contaminants | Food use, supplement labelling, contaminant limits | UK | Retained food law; Food Information Regulations 2014; retained contaminant limits | GB food use, labelling, contaminant limits; Northern Ireland follows the EU | US | FD&C Act 201(ff) (DSHEA); 21 CFR 111; 21 CFR 101.36 | Dietary ingredient status, cGMP, Supplement Facts This is a sourcing reference, not legal advice; check the current text. ## EU and UK: general food law, not a positive list Glycine is an amino acid, not a vitamin or a mineral. The positive list in Annex II to Directive 2002/46/EC covers vitamin and mineral substances and forms; it does not list glycine, so the supplement rules for an amino acid come from general food law plus the national rules of the member state where the product is sold. Check the destination before the label is finalised. Contaminants are a separate check. As of this review, Regulation (EU) 2023/915 sets the limits for food supplements: lead 3.0 mg/kg, cadmium 1.0 mg/kg and mercury 0.10 mg/kg, with no harmonised arsenic limit. It applies to the finished product, so the ingredient specification should be tighter and should state the arsenic limit the buyer sets. Labelling follows Regulation (EU) No 1169/2011 and, for a supplement, the particulars in Directive 2002/46/EC. In Great Britain, retained food law applies, including the Food Information Regulations 2014 and the retained contaminant limits, which carry the same lead, cadmium and mercury figures. The GB permitted-forms schedules cover vitamins and minerals, not glycine, so the amino-acid route is general food law. Northern Ireland applies the EU rules under the Windsor Framework, and the UK and EU texts can diverge after an amendment. ## US: a dietary ingredient under DSHEA Glycine is sold in the US as a dietary ingredient under section 201(ff) of the FD&C Act. The supplier file should state the basis; for an amino acid with a pre-1994 history, that is normally the pre-1994 marketing basis rather than a new dietary ingredient notification. The buyer's obligation is separate: 21 CFR 111 requires identity testing of each component on receipt. The Supplement Facts panel is set by 21 CFR 101.36. It declares the amount of glycine per serving; there is no Daily Value for glycine, so no % Daily Value is shown. The ingredient name should match the specification and the certificate. A structure/function claim must be truthful, substantiated and accompanied by the DSHEA disclaimer, and the marketer must notify the FDA within 30 days of first marketing the claim. Disease claims are not permitted. There is no federal maximum level for lead in dietary supplements. Many US buyers work to California's Proposition 65, where the maximum allowable dose level for lead is 0.5 µg/day and the no-significant-risk level is 15 µg/day; exposure is calculated from the daily dose, so a mg/kg figure alone does not answer the question. ## Metal limits in the file Metal limits used for a glycine supplement file | Parameter | EU and GB | US | Lead | 3.0 mg/kg in the supplement | No federal limit; Proposition 65 exposure model | Cadmium | 1.0 mg/kg in the supplement | No federal limit; specification limit | Mercury | 0.10 mg/kg in the supplement | No federal limit; specification limit | Arsenic | No harmonised supplement limit; buyer sets one | No federal limit; specification limit The catalog specification carries its own limits: Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg. Those are ingredient limits, not a substitute for the finished-product calculation. A finished product made with a compliant ingredient can still exceed a finished-product limit if the daily dose is high or other ingredients contribute metals. ## The claims boundary and the label In the EU and UK, nutrition and health claims are governed by Regulation (EC) No 1924/2006 and the retained equivalents, with authorised wording in Regulation (EU) No 432/2012 and the GB register. As of this review, no health claim for glycine is authorised in either register. The label should therefore describe the ingredient and its amount, not an outcome. In the US, a structure/function claim is possible if it is truthful, not misleading, substantiated and accompanied by the DSHEA disclaimer; it still cannot be a disease claim. The same wording cannot simply be carried into the EU or UK, where the register decides what may be said. Keep the claim file separate from the specification file. ## The file a buyer should hold - Specification naming glycine, CAS 56-40-6, the assay method and the dried basis. - Batch certificate with IR, titration, HPLC, LOD, residue on ignition, chloride, heavy metals, microbiology and particle size. - Contaminant report with the limits and the quantification levels, including an arsenic limit set by the buyer. - Allergen, GMO, irradiation and animal-derived input statements for the lot. - Food-grade declaration and food safety certification where required. - Label artwork with the ingredient name, the amount per portion and the market-specific particulars. - Claim file with the wording, the market register entry or the US substantiation, and the disclaimer where applicable. - Stability summary and the storage statement behind the shelf life. The COA is one page of a larger file; the specification, the label and the claim file answer different questions. ## Checklist before the first order - Name the market and the member state or US state where the product will be sold. - Confirm that the ingredient is described as glycine, not a blend or a derivative, on the specification and the label. - Check the contaminant limits against the finished-product rule and set an arsenic limit. - Check the label particulars for the market: food supplement, Supplement Facts or both. - Check the claim wording against the EU or GB register, or the US substantiation file. - Ask for the method, the basis and the quantification limit behind each certificate line. - Keep the label, the specification and the certificate on the same version and the same lot code. The product page carries the catalog specification; the COA page explains the test lines; the identity page covers the evidence; the EU note, UK note and US note give the detail. ### 06 How we prove a glycine lot is glycine URL: https://nutrition.rainwoodbio.com/products/amino-acids/glycine/identity/ Reviewed: 2026-11-18 Identity is proven in four layers: the document set, the IR spectrum, the assay by titration cross-checked by HPLC, and the impurity fingerprint of chloride, residue on ignition, heavy metals and microbiology. No single result proves glycine; the layers have to agree. The fourth layer is where a different amino acid, a salt or a glycine derivative usually shows up. In one lineIR names the molecule, titration and HPLC measure it, and chloride and residue on ignition show what else is in the drum. ## The four layers of identity What each identity layer proves and misses | Layer | Test | What it proves | What it misses | Document | Specification, COA, lot code | The lot is described and traceable | Whether the drum matches the paper | Spectrum | IR against a reference | The functional groups match glycine | Purity and the level of a similar amino acid | Assay | Titration, with HPLC confirmatory | The acid–base content and the separation | A non-titratable diluent or a close analogue | Impurity | Chloride, residue on ignition, metals, micro | What else is in the drum | The identity of an organic analogue at low level The layers are not interchangeable: a correct IR spectrum does not prove the assay, and a titration does not prove the spectrum. The certificate is useful when it carries all four; the buyer's own identity test is the fifth check that the paper belongs to the drum. ## Titration and HPLC: reading the two numbers as a ratio The release assay titrates the amino group on the dried basis. HPLC separates glycine from other amino acids and derivatives. Compare the two on the same basis; a dried-basis titration and an as-is HPLC result cannot form a meaningful ratio. When the two agree within the methods' uncertainty, the lot behaves like a single amino acid. A persistent gap is a finding, not a rounding error. A high titration with low HPLC can mean a titratable impurity the HPLC method does not see, a derivatisation problem, or a different amino acid with a similar equivalent weight. A low titration with high HPLC can mean moisture or a non-titratable diluent. The next step is the chromatogram and the sample preparation, not a new assay on the same sample. Glycine has no strong UV chromophore, so the HPLC method usually relies on derivatisation or on a detector such as refractive index, evaporative light scattering or low-wavelength UV. The certificate should name the column, the detector and the derivatisation, because a glycine result from an unnamed HPLC method is hard to audit. ## IR, XRD and the crystal form IR is the identity test on the certificate. The spectrum shows the carboxylate and ammonium bands and is compared with a reference run under the same conditions. A potassium bromide disc, an attenuated total reflectance accessory and a mull can give different relative intensities, so the certificate should state the technique and the reference. XRD answers a different question. Glycine has more than one crystal form; alpha is the usual commercial form, and beta and gamma are known. A standard COA does not carry XRD, and a routine lot does not need it. Reach for XRD when a supplier claims a specific form, when a milled or granulated grade behaves differently from the reference, or when a dispute turns on the solid state. It is not an impurity screen, and a clean pattern does not replace the chromatogram. If the grade is milled or granulated, ask whether the process changes the crystal form and whether the supplier has XRD data for the finished grade. A particle-size change is not a form change by itself, but the question is worth asking before a specification is fixed. ## The adulterants that fit the assay Adulterants and the lines that catch them | Adulterant | Why it can pass a rough check | What catches it | Other amino acids (alanine, serine) | Same acid–base behaviour; similar mass | HPLC separation; IR differences | Glycine hydrochloride | Contains glycine; the chloride is easy to miss | Chloride; pH; IR | Sodium glycinate | Contains glycine; the sodium is easy to miss | Residue on ignition; pH | Glycine anhydride | Glycine-derived; different molecular form | HPLC retention; IR | Salt diluents (NaCl, NH4Cl, sulfate) | May not consume titrant; add mass | Chloride; residue on ignition; assay balance Alanine is the closest relative: one more carbon and the same acid–base groups, so titration alone will not separate it. Serine and valine also matter in a poorly resolved HPLC method. The chromatogram, not the percentage, is the evidence. Glycine derivatives are another route to a misleading number. Glycine hydrochloride and sodium glycinate contain glycine and change the chloride or ash; glycine anhydride is a cyclic dimer that can form on excessive heat and has a different retention time. Each leaves a marker in the impurity panel. Salt diluents are caught by chloride and residue on ignition; a salt that lifts the ash while the assay stays in range is a specification failure. Water is the simplest diluent. Because the assay is reported on the dried basis, a wet lot can still pass 98.5% while the as-is powder contains less glycine. Read LOD with the assay, not after it. ## How to write the identity block - “Glycine, CAS 56-40-6, C2H5NO2, white crystalline powder.” - “Identification: IR spectrum conforms to the reference, technique stated.” - “Assay: 98.5–101.5% by titration on the dried basis; HPLC confirmatory result reported with column and detector.” - “Loss on drying ≤0.2%; residue on ignition ≤0.1%; chloride ≤0.1%.” - “Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg; microbiology as specified.” - “Particle size: ≥95% through 40 mesh, or the agreed granulated distribution.” - “Composition statement: no added other amino acids, salts or glycine derivatives.” The composition statement turns the identity question into a specification. Sign it with the specification, not after a dispute. If the material is a blend or granulated, name the granulating agent and its amount. ## Five questions for the supplier - Which IR reference and technique were used, and can you send the spectrum? - Which assay is the release method, on what basis, and what does the HPLC report show? - What are the chloride and residue-on-ignition results for this lot? - Is the material a single amino acid, or does it contain another amino acid, a salt or a glycine derivative? - Which crystal form is supplied, and is XRD data available for the milled or granulated grade? Five answers should agree with the certificate and with each other. The product page carries the catalog specification; the COA page shows where each test sits; the grade page covers the physical forms; the FTIR note explains the spectrum; the retained-sample note covers the sample chain. ### 01 What the COA for inositol actually contains URL: https://nutrition.rainwoodbio.com/products/vitamins/inositol/coa/ Reviewed: 2026-11-18 The certificate for a myo-inositol lot reports appearance, identification by IR, melting point, assay by HPLC, loss on drying, residue on ignition, the heavy-metal panel, microbiology and particle size. Read it as a test report: parameter, method, limit and that lot's result. The ranges are the catalog specification; the batch COA confirms one drum. An assay without method and isomer does not identify the material. In one lineAn inositol assay is only meaningful when the certificate names the detection method, the assay basis and the isomer it measured. ## The certificate as a test report Each row should carry three things: what was measured, which method produced the number, and which limit the lot was released against. Without the method column, two suppliers' tables cannot be compared, because the same word can describe two different measurements. Identity, assay and moisture · myo-inositol | Parameter | Method | Release limit | Appearance | Visual | White crystalline powder | Identification | IR spectroscopy | Spectrum conforms to reference | Melting point | Capillary method | 224–227 °C | Assay (myo-inositol) | HPLC | 99.0–101.0% | Loss on drying | Gravimetric | ≤0.5% | Residue on ignition | Gravimetric | ≤0.1% | Particle size | Sieve analysis | ≥95% through 40 mesh Contaminant and microbiological limits | Parameter | Method | Release limit | Lead (Pb) | ICP-MS | ≤3 mg/kg | Arsenic (As) | ICP-MS | ≤2 mg/kg | Cadmium (Cd) | ICP-MS | ≤1 mg/kg | Mercury (Hg) | ICP-MS | ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent Identification and melting point are identity checks, not purity figures. The heavy-metal panel is a release gate and a specification line, not a label claim. That separation stops a “passes” summary from standing in for the evidence. ## What the assay measures, and on what basis The assay is a quantitative HPLC result for myo-inositol against a reference standard. A range of 99.0–101.0% is normal for an assay that includes the uncertainty of the standard, the preparation and the integration. A result above 100% is not a super-pure lot; the method, standard and moisture basis explain it. The basis matters. An as-is result includes the moisture that loss on drying measures; a dried-basis result excludes it. With a loss on drying limit of ≤0.5% the gap is small, but it is not zero, and the certificate should say which basis was used. Residue on ignition is inorganic material, and subtracting both moisture and residue from 100 does not yield a valid assay; that arithmetic mixes three measurements. Myo-inositol has no useful ultraviolet chromophore, so the method usually relies on refractive index (RI), evaporative light scattering (ELSD), or electrochemical detection after anion exchange. RI is temperature-sensitive and gradient-limited; ELSD needs a volatile mobile phase. The method should name the column, mobile phase, detector and standard, not only the word HPLC. Assay is not total sugar. A colorimetric total-sugar method measures a class of compounds and cannot distinguish myo-inositol from glucose, sorbitol, mannitol or another cyclitol. A certificate line reading “total sugar ≤1%” is an impurity limit, not an assay; a “99% total sugar” result could describe a drum that is mostly glucose. The number becomes an inositol assay only when the method separates and identifies the peak. The isomer is the last part of the basis. Myo-inositol and D-chiro-inositol share the formula C₆H₁₂O₆ and the same molecular mass. One peak at the retention time of a myo standard does not prove the peak is myo unless the method has been shown to resolve the isomers, or a second technique confirms the structure. ## Release limit versus batch result The release limit is the acceptance boundary; the batch result is what the laboratory measured on that lot. They belong in separate columns, with the method beside them. A result column filled with the specification range is not a result; it is a copy of the gate. A certificate that reports only “conforms” for every line is a conclusion; the reader should still be able to reach it from the numbers. Some parameters are pass/fail by nature. Identification by IR is a comparison with a reference spectrum, and “conforms” is legitimate if the certificate names the reference and the instrument. Melting point, assay, loss on drying, residue and each metal are numeric and need a result. Where a result is “not detected”, the reporting limit belongs on the page: a metal below the limit is not zero, and a screen without a stated limit says more about the laboratory than about the drum. Moisture and residue also change the fill weight: a lot at the top of the loss-on-drying limit carries less inositol per gram than a dry lot at the same as-is assay. ## What moves between batches Assay, loss on drying, residue and particle size move with crystallisation, drying, milling and sieving. A different drying end-point shifts moisture; a different mill shifts the particle-size distribution and the proportion of fines. These are process variables, not signs that the molecule changed, and the batch result shows where the lot landed inside the range. Colour and flow are less quantitative and often more revealing. A tint can point to a drying step, a trace of metal or carry-over from the previous campaign; caking can point to moisture pickup. Neither is a rejection on its own, but a trend is worth a conversation before the next order. The isomer deserves the same trend view. If the label claims myo-inositol only, a rising D-chiro figure in the assay changes what the drum is, even while the total assay stays inside the range. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a label claim the supplier's certificate does not prove, or a disputed result. The useful panel is not a full repeat. It is the set of tests that answers the open question: an isomer-resolving HPLC run, IR and melting point for identity, ICP-MS for the metal panel, and a sugar or sugar-alcohol screen where adulteration is a concern. Ask the laboratory to state its detection and quantification limits, and whether it is accredited to ISO/IEC 17025 for that method. The sample tested should be the retained sample from the lot, not a fresh scoop without a lot code. ## What to compare between suppliers Put the certificates side by side on six lines. Two quotations that match on the assay headline but diverge on the other five are not describing the same powder. Six lines to compare on an inositol certificate | Line | Why it matters | What to ask | Isomer and assay method | Same formula, different molecule | Which isomer, and does the method resolve it? | Detector | RI, ELSD and electrochemical methods see different things | Column, mobile phase and detector | Assay basis | As-is and dried results are not interchangeable | Which basis, and what are LOD and residue? | Particle size | Flow, fill weight and dust | Sieve method and full distribution | Contaminants and microbiology | Release gates for the market | Results, limits and reporting limits | Lot traceability | The certificate must belong to the drum | Lot code on COA, drum and retained sample The specification sits on the inositol product page; grades are compared on the grade page, isomer tests on the identity page, and the detector choice in the HPLC method note. ### 02 Myo-inositol, D-chiro or a ratio: choosing an inositol grade URL: https://nutrition.rainwoodbio.com/products/vitamins/inositol/grades/ Reviewed: 2026-11-18 Inositol is sold as myo-inositol, as D-chiro-inositol, as a pre-blended 40:1 ratio of the two, and in several physical forms of the same myo powder: 40 mesh crystalline, 80 mesh milled and granulated. The isomer decides what the label can say; the physical form decides how the powder runs. The assay figure alone does not distinguish them. In one lineThe isomer and the physical form choose the grade; the assay percentage on its own does not. ## Why the grade is not the assay Three variables hide behind one grade name: the isomer, the physical presentation and the assay basis. A certificate that reads “inositol 99.0–101.0%” without naming the isomer has described an assay, not a material. Myo-inositol and D-chiro-inositol share the formula C₆H₁₂O₆ and the same molecular mass, so the same assay range can be met by either molecule. Those variables change different things. The isomer changes the ingredient name, the label entry and the specification. The physical form changes flow, fill weight, dust and dispersion. The assay basis changes how the number is calculated and how it compares with another supplier's certificate. A grade decision that considers only the assay has left two of the three open. ## The grades side by side Inositol grades · what changes in the drum | Grade | What it is | Label name | Fits | Watch | Myo, 40 mesh | Crystalline myo-inositol; catalog grade | Myo-inositol | Capsules, tablets, sticks, blends | Standard grade; confirm assay basis | Myo, 80 mesh | The same powder, milled finer | Myo-inositol | Capsules, suspensions, fine blends | Fines, dust, static and caking | Granulated myo | Agglomerated myo-inositol | Myo-inositol | Tablets, sachets, high-speed filling | Granulation aid must be declared | D-chiro | A different stereoisomer | D-chiro-inositol | Products that declare the D form | Separate specification; not interchangeable | 40:1 blend | Myo and D-chiro pre-blended by weight | Both names | Products that declare a ratio | Homogeneity and an assay for each isomer Only the first three are the same molecule at different presentations. D-chiro is a separate ingredient, and the 40:1 blend is a two-ingredient formula. Reading them as grades of one powder is the commonest source of a wrong label. ## Particle size, density and granulation A 40 mesh sieve opening is about 420 µm, and the catalog limit of ≥95% through 40 mesh describes a powder that passes almost completely. An 80 mesh opening is about 177 µm, so a milled grade is materially finer. The finer powder wets out faster and fills a small capsule more evenly, but it also generates dust, carries static and cakes more readily in an open pack. Milling does not change the assay; it changes the handling. Granulation is the opposite trade. Agglomerated particles flow better, generate less dust and can carry a higher bulk density, which helps a tablet press or a high-speed sachet filler. The granulation aid, if any, becomes part of the ingredient list and has to be declared. The assay and loss on drying still apply to the granulated material, not to the powder before granulation. Bulk density is not on the catalog specification. If the press or the sachet filler is density-sensitive, ask for the bulk and tapped density of the actual grade, not a figure borrowed from the 40 mesh powder. A change of mesh or a granulation step is a change of specification and needs its own certificate. ## What changes in the finished product For capsules, the constraint is fill weight and flow. A 40 mesh powder is the default; a finer grade can improve content uniformity in a small capsule but may bridge in the hopper. For tablets, flow, density and compression matter more than the last decimal of the assay; a granulated grade can rescue a blend that is too light or too dusty, while a very fine grade may need a different lubricant and a slower press. Sticks and drink mixes care about dispersion and mouthfeel. Myo-inositol is freely soluble in water, about 0.5 M at 20 °C, so dissolution is rarely the limit; the powder's wetting and the blend's flow are. A fine grade disperses quickly but can clump on contact with water if it is not agglomerated. Gummies and chews are a matrix problem: water activity, the sugar system and process temperature decide the result, and the process stays far below the 224–227 °C melting point. A 40:1 blend adds a homogeneity problem. D-chiro is 1 part in 41 by weight, a small fraction that can segregate in a drum or a hopper. A pre-blend, a granulated blend or a fixed-order mixing step is needed, and the certificate should report an assay for each isomer, not a single total-inositol figure. ## What to put in the specification - “Myo-inositol, CAS 87-89-8; assay 99.0–101.0% by HPLC; column, mobile phase and detector named.” - “Identity: IR spectrum conforms to reference; melting point 224–227 °C.” - “Loss on drying ≤0.5%; residue on ignition ≤0.1%; heavy metals and microbiology as released.” - “Particle size ≥95% through 40 mesh; 80 mesh or granulated on request; granulation aid declared.” - “For a 40:1 blend: myo-inositol and D-chiro-inositol named separately, ratio stated by weight, each assay reported.” A line that reads only “inositol 99%” leaves the isomer, the mesh and the basis open. The certificate has to repeat the same definitions, or the buyer is comparing a name rather than a drum. ## When not to change grade If the label claims myo-inositol and the formula has room for the powder, the 40 mesh catalog grade is enough. The 80 mesh grade earns its place only when fill weight, content uniformity or dispersion is the actual constraint. Granulation earns its place when dust, flow or density is the problem; it does not improve a blend that already runs. D-chiro belongs only where the label declares it, and a 40:1 blend belongs only where both names and the ratio can be declared and the process can handle the small fraction. Switching grade is a revalidation, not a substitution. Fill weight, flow, taste, stability and the label all move, and the new certificate has to repeat the new definitions. A finer mesh is not a higher grade, and a ratio blend is not a stronger version of myo-inositol; it is a different formula with a different label. The parameters behind these choices are on the COA page. The two isomers are compared on myo versus D-chiro; identity tests are on the identity page; the catalog specification is on the inositol product page. Regulatory naming is covered on the compliance page. ### 02.1 Myo-inositol vs D-chiro-inositol: what the ratio changes URL: https://nutrition.rainwoodbio.com/products/vitamins/inositol/grades/myo-vs-d-chiro/ Reviewed: 2026-11-18 Myo-inositol and D-chiro-inositol are stereoisomers with the same formula, C₆H₁₂O₆, and the same molecular mass, but a different arrangement of the hydroxyl groups. Myo-inositol is the meso form sold as the bulk ingredient; D-chiro-inositol is a chiral isomer sold as a separate ingredient. A 40:1 blend contains both, so the label, the assay and the purchase order have to name both. In one lineMyo and D-chiro are different molecules, so a 40:1 blend is a two-ingredient formula, not a stronger version of one grade. ## Two isomers, one formula The two names describe the same atoms in a different spatial arrangement. Myo-inositol has a plane of symmetry and is a meso compound, so it is optically inactive. D-chiro-inositol is chiral, and its solutions rotate plane-polarised light. Both are cyclitols, both are non-reducing, and both are freely soluble in water; the similarity is why a total inositol assay can pass while the isomer is wrong. The difference is not a purity grade and it is not removed by drying, milling or granulation. A drum of myo-inositol does not become D-chiro on storage, and a blend does not become a single ingredient because the particles are fine. The isomer is a property of the molecule, and only a method that resolves the two can report it. Myo-inositol is the form supplied as the catalog grade. D-chiro-inositol is supplied as a separate specialty ingredient with its own specification. They are not interchangeable gram for gram in a formula, and a certificate that says “inositol 99.0–101.0%” has not said which one is in the drum. ## What 40:1 actually means A 40:1 blend means 40 parts myo-inositol to 1 part D-chiro-inositol by weight. Because the two isomers have the same molecular mass, the same figure holds on a molar basis: 40 moles of myo to 1 mole of D-chiro. That coincidence makes the arithmetic simple, but the basis should still be stated on the specification, because a ratio without a basis is ambiguous. A blend with 2,000 mg myo-inositol and 50 mg D-chiro-inositol contains 2,050 mg of inositol in total, and the D-chiro fraction is 50 ÷ 2,050, or about 2.44% by weight. A label that declares only “inositol 2,050 mg” hides that split. A label that declares the ratio but not the two quantities leaves the buyer to do the arithmetic. The ratio is a formula decision, not a compendial grade. It is calculated from two assays, not measured as a single ratio, and it is only meaningful if the blend is homogeneous. D-chiro at roughly one part in 41 is a small fraction, and small fractions segregate. A pre-blend, a granulated blend or a validated mixing step is needed, and the certificate should report an assay for each isomer rather than a total-inositol figure. ## What the label has to say In the EU, both isomers belong in the ingredient list, using the names myo-inositol and D-chiro-inositol. The quantities per portion belong in the nutrition declaration or the supplement particulars, and there is no NRV for either isomer, so no percentage NRV is printed. The product is a food supplement, and the standard supplement warnings apply. In the US, the Supplement Facts panel declares inositol by amount per serving, with “Daily Value not established”. If D-chiro-inositol is added as a separate ingredient, it should be named in the ingredient list and declared in the panel; a single “Inositol” line does not tell the reader that two isomers are present. In the UK, the same naming logic applies under retained labelling rules. A front-of-pack “40:1” statement is a ratio statement, not a substitute for the ingredient list. It should be accompanied by both names and by the quantities, and the ratio should state that it is by weight. A pack that says “inositol” while the drum contains myo plus D-chiro is a labelling defect before it is a quality question. ## How each isomer is measured Tests for a myo and D-chiro blend | Test | What it shows | Limit | Isomer-resolving HPLC | Separate myo and D-chiro peaks | Needs a demonstrated resolution and a standard for each | Total inositol HPLC | The sum of the isomers | Cannot give the ratio on its own | Optical rotation | Presence of a chiral fraction | A screen, not a quantitative assay | NMR | Substitution pattern of the ring | Used for a disputed lot or a reference check | Blend homogeneity | Distribution of the minor component | Sampling plan and a stated acceptance criterion The practical sequence is to assay each isomer on an isomer-resolving method, calculate the ratio from the two results, and check homogeneity by sampling more than one point in the blender or drum. A single peak at the retention time of a myo standard does not show that no D-chiro is present; the method has to be shown to separate the two, and a spiked sample is the simplest demonstration. ## When to choose which Choose myo-inositol alone when the label names inositol and the formula is built on the myo grade. It is one ingredient, one assay and one label entry, and the 40 mesh catalog grade covers most capsule, tablet and stick applications. Choose D-chiro-inositol alone only when the label declares the D form and the specification, the assay and the label all use that name. Choose a 40:1 blend when the label declares both isomers and the process can handle a small minority component. The blend fixes the two quantities together: at a fixed total, D-chiro is one forty-first of the inositol mass and myo is forty forty-firsts. Changing the ratio changes both figures, so the label, the fill weight and the assay have to be recalculated together. Do not choose a blend to avoid declaring D-chiro. If the drum contains both isomers, the label has to say so, and the certificate has to report both. A 40:1 blend is a legitimate formula when it is declared and controlled; it is an adulteration risk when it is sold as myo-inositol alone. ## What to write into the specification - “Myo-inositol, CAS 87-89-8, and D-chiro-inositol, each named; ratio stated by weight.” - “Assay each isomer by isomer-resolving HPLC; column, mobile phase, detector and standards named; LOQ stated.” - “Ratio calculated from the two assays; no result obtained by subtracting one isomer from a total.” - “Blend homogeneity: sampling plan and acceptance criterion; granulation aid declared if used.” - “Loss on drying ≤0.5%; residue on ignition ≤0.1%; heavy metals, microbiology and particle size as released.” The grade page places the blend among the other inositol grades; the identity page gives the full test sequence; the COA page shows where each result sits on the certificate; the compliance page covers the label rules; and the inositol product page carries the catalog specification. ### 03 Inositol is stable dry; moisture and the matrix decide the shelf life URL: https://nutrition.rainwoodbio.com/products/vitamins/inositol/stability/ Reviewed: 2026-11-18 Crystalline myo-inositol is stable in a sealed, dry pack: it has no acid-labile bond, no reducing carbonyl and a melting point of 224–227 °C. The risks sit outside the molecule: moisture picked up after opening, caking, a warm matrix with reducing sugars, and a pack that lets water vapour through. Shelf life is assigned from stability data on the grade and the pack, not from the chemical name. In one lineA sealed pack protects the powder; moisture, a warm matrix and an open pack decide how long it keeps. ## The dry powder Sealed at room temperature, the crystalline powder is not expected to lose assay. Its loss on drying limit is ≤0.5%, and that figure defines how much moisture the release specification accepts. Once the liner is opened, the room enters the pack: inositol is soluble and can take up moisture from humid air, the powder begins to cake, and flow changes before any assay result moves. Fine grades are more exposed than the 40 mesh standard because they present more surface and more dust. A milled 80 mesh powder can cake at the top of a drum while the bulk below still runs. Control is part packaging and part routine: a food-grade liner that is genuinely sealed, a desiccant where the climate demands one, a closing procedure between weighings, and first-in-first-out stock rotation. ## In solution Myo-inositol is freely soluble in water, about 0.5 M at 20 °C, and the solution is clear and colourless. It is a cyclitol with no ionisable group, so it does not drive the pH of a drink and has no acid-labile glycosidic bond to hydrolyse. The cyclitol ring is also not a reducing sugar, so it does not act as the carbonyl partner in browning. That is a statement about inositol, not about the formula around it. In an unpreserved aqueous solution the risk is microbial, not chemical. Water activity, pH and the preservation system decide whether the drink supports growth, and a clear beverage needs full dissolution at the final pH. Heat is a matrix question: process temperatures well below the 224–227 °C melting point will not melt the crystal, but a warm, wet blend that also contains a reducing sugar can brown and develop an off-note while the inositol itself is unchanged. ## What actually moves the result Stability factors · myo-inositol | Factor | Effect | Control | Water | Higher loss on drying, caking, poor flow | Sealed liner, desiccant, dry handling room | Heat with reducing sugars | Browning, colour and taste change in the matrix | Lower process temperature, control water activity | pH | No direct hydrolysis; affects the matrix and other actives | Trial the final pH, not only water | Reducing sugar | Browning partner in a warm, moist blend | Non-reducing carrier, cooler process | Packaging | Moisture vapour and odour transfer | Foil laminate, sealed liner, intact drum | Light | Little direct effect on the crystal | Opaque pack for retail formats ## The stability protocol The bulk study keeps powder in its commercial pack at 25 °C/60% RH and 40 °C/75% RH. Pulls are taken at the start and then at 3, 6, 12 and 24 months, with assay, loss on drying, residue on ignition, particle size, appearance and microbiology tested at each point; the heavy-metal panel is normally run at the start and the end. The warm leg is a stress condition, not a storage instruction; it exists to make a trend appear inside the study window. The finished-product study runs alongside, not instead. The capsule, tablet, stick or gummy goes into its own pack at 30 °C/65% RH and 40 °C/75% RH and is tested for assay, moisture, colour, taste and dissolution where it applies. A 40:1 blend needs an assay for each isomer plus a homogeneity check, because the small D-chiro fraction can segregate during storage and handling. ## Formulation and packaging Capsules and tablets shield the powder; the remaining risks are water and the excipients. A direct-compression blend that uses a reducing-sugar carrier should run cooler and be checked for water activity. Granulation changes the particle surface, so the lubricant and the fill weight may need revisiting. A stick pack depends on its seal: foil laminate, a continuous seam and a low moisture-vapour transmission rate are the baseline, and a clear or paper format needs its own data. Gummies and chews are governed by water activity, the sugar system and process temperature. Removing heat or reducing sugar is more effective than adding an antioxidant afterwards. In a drink, dissolution and preservation matter more than the grade: a clear format needs full solubility at the final pH, a cloudy format needs suspension without sediment, and neither is protected by the dry-powder stability data. The commercial packs are the 1 kg foil pouch and the 25 kg fiber drum with an inner liner. Both need an intact seal and a dry store; a drum left open in a humid room is the most common way a stable powder becomes a caked one. The pack and the storage condition belong in the specification, not in a note to the warehouse. ## How shelf life is assigned A shelf life is a conclusion from data, not a standard number attached to a chemical name. The technical data sheet is expected to give the storage condition plus the retest or expiry period supported by the study. Bulk material that will be re-tested before use can carry a retest period; a consumer pack needs a date the shopper can read. Where the pack or matrix has not been studied, the defensible answer is a shorter period or a new study. A 24-month figure borrowed from another pack proves nothing about this drum, pouch, stick or gummy. The COA releases a lot; it does not predict a shelf life. The parameters followed over time are listed on the COA page. The packs a study has to cover are described on the ordering page; the quality page explains how the data are held, and the inositol product page carries the specification. Moisture is defined in the loss-on-drying note. ### 04 Inositol: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/vitamins/inositol/moq/ Reviewed: 2026-11-18 The minimum order is 1 kg, supplied as a foil pouch drawn from a released lot, with 25 kg fiber drums for production. Standard lead time is quoted at 1–7 days and confirmed when the order is placed. The pack, the destination and the specification have to be agreed before the quotation is final, because each changes the document set and the shipping route. In one lineOne kilogram from a released lot is the qualification unit; the pack, the destination and the specification shape the order. ## Why 1 kg is the minimum One kilogram is enough material to run an identity check, an assay, a small trial batch and a retained sample, and it is drawn from a released lot rather than mixed for the enquiry. That is the point of the minimum: the buyer can qualify the material on the same lot code that will appear on a production drum, instead of testing a hand sample with no traceability. The minimum is a handling unit, not a quality threshold. A 1 kg order and a 25 kg order should carry the same specification, the same test panel and the same certificate format. What changes is the pack, the handling and the freight, not the material. If a supplier offers a different specification below a certain quantity, that is a different product, not a small order. For scale-up, the 1 kg pouch is the bridge between the laboratory and the drum. Confirm that the production lot will be made to the same specification and that the mesh or granulation will not change between the trial and the repeat order. ## Packs and liners Inositol packs · what each one is for | Pack | Use | Seal | Watch | 1 kg foil pouch | Sample, trial, small batch | Heat-sealed foil | Reseal after opening; keep dry | 25 kg fiber drum | Production | Inner liner and lid | Liner integrity and humidity | Desiccant, on request | Humid destinations and long storage | Placed inside the pack | Not a substitute for an intact seal The foil pouch is the moisture barrier; the fiber drum is the handling and transport package. A drum without an intact inner liner is a paper tube with powder in it, and a pouch that has been opened and folded is no longer a sealed pack. Both packs carry the lot code, the net weight, the ingredient name and the storage condition. ## Lead time and what moves it The standard lead time is 1–7 days for the catalog grade in its standard pack, counted from the point at which the order and the documents are agreed. It is not counted from the first enquiry, and it is not a promise until the order confirmation names a date. A quotation can describe a typical lead time; only the confirmation is a commitment. Four things move the date. A milled or granulated grade needs a process step beyond the catalog powder. A quantity above the standard pack size needs packing and pallet planning. A destination with its own document or label requirements needs those documents before the pack is closed. And a specification that adds a test beyond the standard panel needs the laboratory result before release. Ask for the lead time against the exact grade and pack, not against the product name alone. ## What a quotation needs from you Six details turn an enquiry into a quotation that can be compared with another supplier's. Six details for an inositol quotation | Detail | What to state | Why it changes the offer | Identity and grade | Myo, D-chiro or 40:1; 40 or 80 mesh; granulated | Different specification and process route | Quantity and pack | 1 kg pouch, 25 kg drum, or a stated multiple | Packing, pallet and freight | Specification | Assay, LOD, residue, metals, mesh, isomer limit | Test panel and release route | Destination | Country and Incoterm | Documents, labels and route | Documents | COA, TDS, SDS, origin, allergen statement, label language | Preparation time and file set | Timeline | Required date and whether a sample is needed first | Schedule and order sequence A quotation that omits any of the six is an estimate. The same product name can describe a 40 mesh myo powder, an 80 mesh milled lot and a 40:1 blend, and those are not interchangeable offers. ## Samples and qualification The 1 kg pouch is the sample unit. A sample request should name the grade, the intended application and the tests you plan to run, so the sample is drawn from a lot made to the production specification rather than from a different presentation. The sample should carry the lot code and the certificate, and it should be retained after testing. Qualification is more than a visual check. Run identity, assay and moisture at minimum, and add an isomer check if the label claims myo-inositol only. Compare the result with the certificate, not with a previous supplier's number. If the sample passes, the production order should reference the same specification version and the same grade; a sample that was milled specially is not evidence for a standard 40 mesh drum. ## Terms to agree before the order The purchase order should reference the specification version, not only the product name. It should also state the pack, the quantity, the Incoterm, the destination, the documents required and the acceptance criteria. The certificate for each lot should be issued against that specification, and the lot code should match the pack and the retained sample. Agree what happens if a lot fails a parameter, how a retain sample is held, and how a change is handled. A change of mesh, granulation or isomer ratio is a change of specification and needs a new certificate; it is not a production detail to be settled by email after the order. The COA page shows the parameters, the grade page explains the mesh and isomer choices, and the compliance page lists the documents a destination may require. The inositol product page carries the catalog specification. ### 05 Where inositol is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/vitamins/inositol/compliance/ Reviewed: 2026-11-18 In the EU, myo-inositol is used as a food ingredient in food supplements rather than as a listed vitamin or mineral, so the vitamin and mineral positive list is not the route and national rules still need checking. In the US it is sold as a dietary ingredient, and in the UK it is a food ingredient under retained food law. In all three, contaminant limits, the label and claims are separate checks. In one linePermission, contaminant limits, label wording and claims are four separate checks, and no single certificate answers all four. ## Three markets, three routes The EU regulates food supplements through Directive 2002/46/EC and general food law; the US through DSHEA and 21 CFR 111; the UK through retained food law and its own supplement regulations. The routes share a concern for safety, composition and honest labelling, but they do not use the same permission list or label panel. This page is a sourcing reference, not legal advice, reflecting the position at this review. Regulations change, so the current text named for each market is the reference for a live project. ## The EU position Myo-inositol is not a vitamin in Annex I to Directive 2002/46/EC, and it is not one of the vitamin or mineral forms in Annex II. That means the positive-list route for vitamins and minerals does not describe it; it is used as a food ingredient in food supplements, and the supplement rules still apply to the finished product. The label carries the “food supplement” descriptor, the ingredient list, the amount per portion, the supplement warnings and the general food information rules. Because inositol is not a vitamin or mineral with a nutrient reference value, the label does not carry a percentage NRV for it. That is a common labelling error: a %NRV figure implies a vitamin or mineral status the ingredient does not have. The nutrition declaration still applies to the product as a food. Member State rules vary. Some countries require a notification or registration before a supplement is placed on the market, and national maximum levels or guidance can be stricter than the EU framework. The novel-food status of the ingredient should also be documented for the destination. Myo-inositol has a long history of food use, but the operator should confirm the current novel-food catalogue and the national position rather than rely on a generic statement. On claims, Regulation (EU) No 432/2012 authorises health claims for named nutrients, and there is no authorised claim for inositol. Only authorised claims may be used, so a disease-related claim or an implied one is outside the framework. ## The US position Myo-inositol is sold as a dietary ingredient. In the Supplement Facts panel it is declared by name and amount per serving, with “Daily Value not established” because no Daily Value has been set for inositol. The source form sits in the ingredient list; for a 40:1 blend, both myo-inositol and D-chiro-inositol should be named. Dietary supplements do not require premarket approval of the ingredient or the label, but the manufacturer must follow the cGMP rule, keep batch records and report serious adverse events. A dietary ingredient that was not marketed in the US before 15 October 1994 is a new dietary ingredient and needs a premarket notification; the brand should confirm the status of its ingredient. Structure or function claims are permitted with the required disclaimer, and they must be truthful and substantiated. Disease claims are not. California Proposition 65 adds a separate exposure calculation and warning duty for listed substances, including lead, and it applies alongside the federal framework. ## The UK position Great Britain applies retained EU-era food law through the Food Supplements (England) Regulations 2003 and their devolved equivalents, together with retained contaminant and labelling rules. Myo-inositol is used as a food ingredient, the supplement particulars apply, and there is no NRV for inositol. Northern Ireland applies EU rules under the Windsor Framework, so a pack for Belfast and a pack for Glasgow can face different routes. Retained law can diverge from the EU; check the current text for the relevant nation before the label is finalised. ## Contaminant limits The limits below are those in force at this review. Contaminant limits for inositol in food supplements | Parameter | EU food supplement limit | Catalog specification | UK | Lead (Pb) | 3.0 mg/kg | ≤3 mg/kg | Retained EU limit | Cadmium (Cd) | 1.0 mg/kg; 3.0 mg/kg for seaweed or bivalve-based supplements | ≤1 mg/kg | Retained EU limit | Mercury (Hg) | 0.10 mg/kg | ≤0.1 mg/kg | Retained EU limit | Arsenic (As) | No harmonised EU maximum for food supplements | ≤2 mg/kg | No harmonised maximum; check guidance The EU limits in Regulation (EU) 2023/915 apply to the food supplement as placed on the market, while the catalog specification is a raw-material release limit. A raw material that meets the catalog limit still has to be checked against the finished-product limit at the intended portion. The catalog figure sits at or below the EU limit for lead, cadmium and mercury; for arsenic it sets a supplier limit where the EU has no harmonised maximum. The US has no federal maximum for these elements in dietary supplements. The brand's specification, USP monographs where they apply, and Proposition 65 are the practical controls. A supplier certificate covers the raw material, not the finished product. ## What the label can say No disease-related claim belongs on an inositol pack. That includes direct, implied and testimonial suggestions of a medical outcome. In the EU, only the health claims authorised in Regulation (EU) No 432/2012 may be used, and inositol has none. In the US, a structure or function statement is permitted with the disclaimer and must be substantiated; in the UK, the retained claim rules follow the same logic. “Inositol” is not a vitamin, so a %NRV figure is wrong. A 40:1 blend should name both isomers and state the ratio; a front-of-pack ratio statement does not replace the ingredient-list entries. A statement about the blend is a claim and faces the same test. ## The file a brand needs - Batch certificate of analysis, lot-specific, with methods and results. - Current specification, including the isomer, assay basis and particle size. - Technical data sheet and safety data sheet. - Heavy-metal and microbiological reports. - Allergen and composition statement. - Country of origin and manufacturing flow chart. - Novel-food or new-dietary-ingredient status statement for the destination. The file supports the brand's own assessment; it does not replace it. The operator remains responsible for composition, label and claims. ## Buyer checklist - Is the isomer named, and does the label match the certificate? - Is the destination route confirmed: EU Member State, UK nation or US? - Do the contaminant results meet the finished-product limit at the intended portion? - Is the %NRV omitted for inositol? - Is every claim authorised or substantiated for that market? - Is the COA issued for the lot being shipped? - Is the novel-food or NDI status documented? - Is any required notification or registration complete? The market notes for the European Union, United States and United Kingdom set out the instruments in more detail. The specification is on the inositol product page, the label names are compared on the grade page, and the batch parameters are on the COA page. ### 06 How we prove an inositol lot is myo-inositol URL: https://nutrition.rainwoodbio.com/products/vitamins/inositol/identity/ Reviewed: 2026-11-18 Identity is established in layers: appearance and solubility, IR and melting point, HPLC retention time and assay, and an isomer-specific check that separates myo-inositol from D-chiro and other cyclitols. An assay of 99.0–101.0% can be met by a different isomer or a sugar alcohol if the method does not resolve them. The certificate has to show which layer was tested and what the method could see. In one lineAn assay percentage is not an identity; the solid form, the retention time and the isomer ratio have to agree. ## Four layers of identity A single test rarely proves a molecule. The useful release file builds identity from tests that fail in different ways, so a coincidence in one layer does not carry the conclusion alone. Identity layers · what each test proves and misses | Layer | Test | What it proves | What it misses | Appearance and solubility | Visual; water solubility | Consistency with the grade | Not specific to any molecule | Solid form | IR spectroscopy | Functional groups and fingerprint | Cannot quantify an isomer | Thermal identity | Melting point, 224–227 °C | Crystalline solid form | A mixture can broaden or depress it | Chromatographic identity | HPLC with RI or ELSD | Amount at a retention time | Co-elution with a similar polyol | Isomer identity | Isomer-resolving HPLC or NMR | Myo versus D-chiro and other cyclitols | Needs a suitable standard and method | Adulterant screen | HPLC, XRD or both | Sugar or sugar-alcohol carry-over | Nothing below the stated limit Identity is the agreement between the layers, not one result in isolation. An IR spectrum and a melting point that match the reference, an assay on the expected retention time and an isomer check that finds no D-chiro form a stronger file than three assay repeats. ## The isomer ratio, not just the assay Myo-inositol and D-chiro-inositol are stereoisomers: the same formula, C₆H₁₂O₆, and the same molecular mass, with the hydroxyl groups arranged differently around the ring. Myo-inositol is the meso form and is optically inactive; D-chiro-inositol is chiral and optically active. A total inositol assay that does not resolve the two cannot tell a myo drum from a D-chiro drum, or from a blend of both. An isomer-resolving HPLC method needs a column and mobile phase that separate the peaks, a standard for each isomer, and a stated resolution. A single peak at the retention time of a myo standard is weak evidence if the method has never been shown to separate D-chiro. Spiking the sample with a small D-chiro standard, or running standard addition, is a practical way to show whether the method can see the second peak. A polarimeter reading is a useful screen: a myo-inositol lot should be optically inactive, while a D-chiro fraction rotates plane-polarised light. The reading is not an assay and it does not identify an unknown adulterant, but an unexpected rotation is a reason to run the isomer method. For a disputed lot, NMR can confirm the substitution pattern directly. For a 40:1 blend, the ratio is calculated from two assays, not from a single total-inositol figure. D-chiro should be measured, not obtained by subtracting myo from the total; the subtraction assumes the only two components are the two isomers, which is exactly the assumption an adulteration check is meant to test. ## What IR, melting point and XRD show IR is the catalog identity test. The spectrum shows the O–H and C–O stretching of the cyclitol and a fingerprint region that can be compared with a reference standard. It is good at confirming that the solid is consistent with myo-inositol and good at flagging a different solid, but it is not an isomer assay and it does not measure how much of a second component is present. The melting point of 224–227 °C is a second solid-form check. A pure crystalline lot melts in that window; a mixture can melt lower or over a wider range. The test is simple and useful, but it is not specific: another polyol with a similar melting point can pass it. X-ray diffraction adds a crystal-phase view. It can show the characteristic pattern of myo-inositol and can detect a crystalline adulterant such as sucrose, glucose or sorbitol above its detection limit. It does not see an amorphous adulterant, a fully dissolved one, or a second component below its detection limit. If XRD is used, the report should state the detection limit and the reference pattern; a “no impurity” line without a limit is not evidence. ## Sugars, sugar alcohols and other isomers The commercial incentive to extend an inositol lot is straightforward: glucose, sucrose, maltodextrin, sorbitol and mannitol are common bulking agents, and some of them pass a total-sugar or total-carbohydrate assay. An assay of 99% by a non-specific method is not evidence that the powder is myo-inositol. Adulterant routes and the tests that see them | Adulterant | What it does | Test that sees it | Glucose, sucrose, maltodextrin | Bulks the powder; responds to total-sugar methods | HPLC with RI or ELSD; sugar profile | Sorbitol, mannitol, xylitol | Similar polyol behaviour and solubility | HPLC resolution; melting point; XRD | D-chiro-inositol | Same formula and mass; meets a total inositol assay | Isomer-resolving HPLC; optical rotation; NMR | Scyllo- or neo-inositol | Other cyclitol isomers | Isomer-resolving HPLC; NMR The screen should be chosen for the risk, not copied from a template. A sugar profile answers the bulking question; an isomer method answers the myo-versus-D-chiro question; XRD answers the crystalline-solid question. Each report needs its limit of detection and quantification, and a “not detected” line has to be read against that limit. ## How to write the specification - “Myo-inositol, CAS 87-89-8; assay 99.0–101.0% by HPLC; column, mobile phase, detector and standard named.” - “Identification: IR spectrum conforms to reference; melting point 224–227 °C.” - “Isomer: D-chiro-inositol not more than the stated limit of quantification when the label claims myo-inositol only.” - “Loss on drying ≤0.5%; residue on ignition ≤0.1%; heavy metals and microbiology as released.” - “Adulterant screen: no glucose, sucrose, sorbitol or mannitol above the stated limit.” - “Particle size ≥95% through 40 mesh; retained sample per lot.” The specification should distinguish the tests that are run on every lot from the tests that are run on request. An isomer limit and an adulterant screen are only useful if the certificate reports the result and the limit; a specification line without a method is a wish. ## Five questions for the supplier - Which isomer is this lot, and how does the HPLC method resolve myo-inositol from D-chiro-inositol? - Which detector, column and standard were used, and what are the detection and quantification limits? - Is the assay reported on an as-is or dried basis, and what are the loss on drying and residue results? - Is there an IR spectrum and a melting point for this lot, and which reference was used? - Has the lot been screened for sugars, sugar alcohols and other inositol isomers, and at what limits? Five direct answers amount to an identity file; a single assay percentage does not. The COA page shows where each figure sits on the certificate, the grade page explains the isomer and mesh choices, and myo versus D-chiro covers the ratio. The inositol product page carries the catalog specification, and the HPLC method note explains the detector choice. ### 01 What the COA for L-carnitine actually contains URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-carnitine/coa/ Reviewed: 2026-11-18 The certificate for an L-carnitine lot reports appearance, infrared identification, assay by HPLC on the anhydrous basis, specific rotation, loss on drying, residue, metals and microbiology. Each line needs a method and a limit beside the result, and the reader needs to know which figure says how much carnitine is present and which says which carnitine it is. The values below are catalog; the certificate confirms one lot. In one lineThe assay says how much carnitine is in the sample, the rotation says which carnitine it is, and the anhydrous basis says what the percentage is a percentage of. ## The certificate as a test report A certificate can be audited only when every row carries the parameter, the method and the limit the lot was released against. A result with no method is an assertion; a method with no limit cannot be judged. Identity, assay and water · L-carnitine base | Parameter | Method | Release limit | Appearance | Visual | White crystalline powder | Identification | Infrared absorption | Conforms to reference spectrum | Assay (anhydrous basis) | HPLC | 98.0–102.0% | Specific rotation | Polarimetry, 10% solution | −29.0° to −32.0° | Loss on drying | Gravimetric | ≤0.5% | Residue on ignition | Gravimetric, ashed | ≤0.1% Physical, contaminant and microbiological limits | Parameter | Method | Release limit | Particle size | Sieve analysis | ≥95% through 40 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent Read the sheet in blocks: the first table describes the molecule, the second the powder. A certificate that reports the assay and omits the rotation has answered the quantity question and skipped the identity question. ## HPLC, rotation and the anhydrous basis The assay is an HPLC result. Carnitine has no strong chromophore, so a method that reports a percentage has to say how the detector saw the molecule: low-wavelength ultraviolet, a derivatisation step, or an evaporative detector. The method sheet should name the column, the mobile phase, the standard and the calculation; “HPLC 99.4%” alone cannot be reproduced by a second laboratory. The specific rotation is the identity figure. It is measured on a 10% solution, and the reading depends on solvent, temperature, path length and concentration, so a value quoted without them is not comparable. The window here is −29.0° to −32.0°; the width absorbs normal polarimeter variation and still excludes the racemate, which sits near zero. The anhydrous basis is a correction, not a second measurement: the assay is divided by the dry matter, so a result on that basis is higher than the same sample reported as-is. With water at ≤0.5%, the correction can move a figure by up to about half a point — enough to carry a lot across the 98.0% line. The first question about an assay figure is therefore not “what is it” but “on which basis”. Two small lines matter. Loss on drying covers water and volatiles; at ≤0.5% on a hygroscopic base it is a statement about the pack as much as about the dryer. Residue on ignition at ≤0.1% shows that crystallisation removed inorganic material, and it is the line that moves first when a wash is shortened. ## Release limit versus batch result The release limit is the boundary; the batch result is what the laboratory measured. Both belong on the certificate, in separate columns, with the method beside them. A result column filled with the specification range is not a result; it is a copy of the gate, and it tells the buyer nothing about the drum in front of them. Not every line needs a range in the result column. Limits written as “not more than” — loss on drying, residue, the four metals — are one-sided, and both 0.12% and 0.15% water sit inside the same gate. The rotation and the assay are two-sided, so each should report one figure with its conditions. “Passes specification” is a conclusion, not a measurement, and the reader should be able to reach it from the numbers on the page. ## What moves between batches Water is the first variable. It moves with the drying end-point, the humidity in the packing room and the condition of the liner, and it moves the anhydrous assay with it. A lot can sit inside the assay window and still be wetter than the previous one, which shows up in flow, caking and fill weight long before a rejection. The rotation moves less, and that is the point. A change of a full degree inside the window is worth investigating, because it is the only line that responds to the enantiomeric composition. Colour and particle size are the practical variables: a cream tint or a shift in the 40-mesh fraction changes how the powder runs on a capsule machine while the chemistry stays in specification. Related substances are the gap in a short panel. Betaine and crotonobetaine are carnitine's close structural neighbours, and a specification that does not name them is not testing for them; if the risk assessment needs that coverage, add the test rather than assume the assay covers it. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a rotation at the edge of the window, or a disputed certificate. The useful panel is targeted: rotation on a freshly prepared solution, chiral HPLC for the D enantiomer, loss on drying for water, and ICP-MS for the metals. Ask the laboratory to state its limit of detection for the chiral method. “D-carnitine not detected” without a limit describes the method's sensitivity, not the sample. The same rule applies to the assay: the report should name the column, the detector and the basis, not only the percentage. When a result is contested, the sample tested should be the retained sample from the lot, and the lot code on the certificate, the drum and the referee's report should match. ## What to compare between suppliers Put six lines side by side: form and counter-ion; assay with method and basis; rotation with conditions; loss on drying; the contaminant panel; particle size. Two quotations that agree on the assay and diverge on the rotation are not describing the same material; two that agree on both but differ on water will behave differently in the capsule room. The second layer is traceability. The lot code should be identical on the certificate, the pack and the retained sample, and the certificate should name the manufacturing site and the pack date. A correct certificate can still belong to a drum other than the one on the loading dock. The catalog specification sits on the L-carnitine product page. The forms are compared on the grade page, the evidence that separates the L form from a racemate is on the identity page, and the release workflow is described on the quality page. The separation itself is explained in the HPLC method note, and loss on drying is defined in the glossary. ### 02 Base, tartrate or acetyl: choosing an L-carnitine form URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-carnitine/grades/ Reviewed: 2026-11-18 L-carnitine is supplied as the base, as the L-tartrate salt and as acetyl-L-carnitine, and the three are different label ingredients with different masses and different water behaviour. The base is the whole substance, the tartrate carries about 68% carnitine in a 2:1 salt, and acetyl-L-carnitine is a different molecule that carries about 79% carnitine by mass as the free base. The choice is set by the label name, the dose and the pack long before it is set by the assay. In one lineThe three forms carry different carnitine per gram, and the base's water uptake, not its assay, is what usually decides the fill. ## The form is a label decision first The carnitine cation is the same in the base and in the tartrate. What differs is the counter-ion and, with it, the mass of powder that has to be weighed for a given amount of carnitine. A product whose ingredient list says “L-carnitine” and whose powder is the tartrate has a labelling problem even when the carnitine figure matches the claim, because the label names one substance and the pack contains another. Acetyl-L-carnitine is a further step away. It is an ester of carnitine, it is declared under its own name, and its assay is an assay of the ester rather than of carnitine. Treating the three as interchangeable because they share a parent molecule is the most common sourcing error in this category, and it is made at the label stage, not at the laboratory. ## The three forms side by side Form, carnitine content and handling · L-carnitine | Form | Carnitine per gram | Counter-ion | Water uptake | Solution | L-carnitine base | 1.00 g (dry basis) | None; zwitterion | High | Near neutral | L-carnitine L-tartrate | 0.68 g | Tartaric acid, 2:1 | Moderate | Acidic | Acetyl-L-carnitine | 0.79 g as the free base; 0.67 g as the hydrochloride | None as the ester; hydrochloride common | Moderate to high | Acidic The 0.68 figure is stoichiometry, not a certificate result: two carnitine molecules at 161.20 g/mol plus one tartaric acid at 150.09 g/mol gives a salt of 472.49 g/mol, of which 322.40 g is carnitine. A certificate for the tartrate should still report the carnitine assay it actually measured, together with the identity of the counter-ion, because a blend of carnitine and tartaric acid can be made to weigh the same as the salt. ## Water, flow and pH The base is hygroscopic, and that single property drives most of the handling difference. It picks up water from the air, softens, and cakes in a pack that has been opened and closed without a seal. On a capsule machine the symptom is weight variation: the powder bridges in the hopper or sticks to the dosator, and the fill drifts while the assay on the bench still reads correctly. The tight loss-on-drying limit in the specification, ≤0.5%, is only achievable if the pack keeps the powder dry after the dryer. The tartrate is the easier powder. The counter-ion reduces the water uptake, the crystals flow, and the material tolerates a dose room that the base would not. What it adds is acidity: a solution of the tartrate reads acidic, which matters in a stick pack or a drink where the taste is part of the product. Acetyl-L-carnitine sits between the two: the ester is hygroscopic, the hydrochloride is a common commercial form, and the salt name belongs on the label if the salt is what is used. Particle size cuts across all three. The catalog powder is specified at ≥95% through 40 mesh; milling to 80 mesh is available on request for blends that need a finer, more uniform dispersion, and granulation is available where flow matters more than dissolution speed. ## What the form does to the fill Convert before you fill. A formula that declares 500 mg of carnitine needs 500 mg of the base, 733 mg of the tartrate (500 ÷ 0.682) or 631 mg of acetyl-L-carnitine free base (500 ÷ 0.793). The three weights do not fit the same capsule, and the difference is large enough to change the shell size, the number of capsules per serving or the tablet weight. Capsules suit the base and the tartrate; the base needs a low-humidity dose room and a sealed pack, while the tartrate is more forgiving on a high-speed machine. Tablets suit the tartrate, which compacts and flows. Sticks and drink mixes suit any of the three, but the tartrate brings acidity and the base brings water uptake into a matrix that may already be hygroscopic. Liquids suit the base, which is freely soluble and close to neutral in solution, and they move the problem from water uptake to preservation and pH control. ## What changes in the specification A purchase specification is written for the named form, not for “carnitine”. For the base, the assay is carnitine on the anhydrous basis, the rotation proves the L configuration, and the water limit carries the handling risk. For the tartrate, add the counter-ion identity and a carnitine figure that is consistent with the 2:1 stoichiometry; a tartrate certificate that reports only “assay 99%” has not said 99% of what. For acetyl-L-carnitine, the assay is for the ester, the label declares the ester, and the specification should say whether the material is the free base or the hydrochloride. The rotation still applies, because the acetyl form is chiral as well. Whichever form is bought, the certificate should name the form, the basis and the method on the same line as the number. ## When not to switch Do not switch forms to solve a fill problem without re-checking the label, the serving size and the stability of the finished pack. The tartrate is easier to run, but it changes the declared mass, the taste and the acid load of the formula; the base is the smallest weight per unit of carnitine, but it is the least forgiving in an open pack. A switch is a new specification, a new label and a new stability question, not a substitution at the weigh-out. The release tests for each form are described on the COA page, and the water question is followed through on the stability page. The direct comparison for a capsule is on the base versus tartrate page, the proof of configuration is on the identity page, and the packs and minimum are on the MOQ page. The product page carries the base specification, and assay is defined in the glossary. ### 02.1 L-Carnitine base vs tartrate: which form fits the capsule URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-carnitine/grades/base-vs-tartrate/ Reviewed: 2026-11-18 For the same declared amount of carnitine, the base is the lightest option and the tartrate is about 47% heavier: 500 mg of carnitine is 500 mg of base or 733 mg of the 2:1 tartrate. The base is also the more hygroscopic of the two, so it demands a dry filling room and a pack that stays sealed, while the tartrate flows and tolerates a normal dose room. The choice for a capsule is therefore a trade between the fill weight the shell can take and the water control the plant can hold. In one lineThe tartrate costs about 47% more powder per gram of carnitine and returns a free-flowing, less hygroscopic fill; the base gives the smallest capsule and takes the water risk. ## The mass conversion, before anything else The label declares carnitine, the drum contains a salt, and the two figures are not the same number. The tartrate is a 2:1 salt of carnitine and tartaric acid: two carnitine units at 161.20 g/mol plus one tartaric acid at 150.09 g/mol give 472.49 g/mol, of which 322.40 g is carnitine, or 68.2%. Dividing by that fraction converts a carnitine figure into a tartrate weight. Declared carnitine and the powder weight it needs | Carnitine declared | L-carnitine base | L-carnitine L-tartrate | 100 mg | 100 mg | 147 mg | 250 mg | 250 mg | 367 mg | 500 mg | 500 mg | 733 mg | 1,000 mg | 1,000 mg | 1,466 mg The conversion is stoichiometry, not a certificate result. The certificate still has to report the carnitine it measured, because a blend of carnitine and tartaric acid can be made to weigh the same as the salt without being one. ## Water behaviour in the shell The base is hygroscopic. It takes up water from the air, softens, and cakes in an open pack; in a capsule it can pull water from the shell, and the shell can become brittle or tacky as the water moves. A sticky fill also bridges in the hopper and sticks to the dosator, so the fill weight drifts while the powder on the bench still assays correctly. The tight water limit in the specification, loss on drying ≤0.5%, only holds if the pack and the room hold it too. The tartrate is the calmer material. The counter-ion reduces the water uptake and the crystals flow, which is why a high-speed capsule line generally prefers it. The trade is mass: the same carnitine figure needs a bigger fill, and a shell that fills comfortably with 500 mg of base may not take 733 mg of tartrate, depending on the bulk density of the lot. ## Acidity and what it touches The base is a zwitterion and its solution sits close to neutral. The tartrate carries tartaric acid and its solution reads acidic. Inside a capsule the acid is mostly a question for the shell and any enteric coating; in a stick pack or a drink it is a taste decision. In a tablet it can affect the binder and the mouthfeel, and in a blend it can react with an acid-sensitive partner such as a carbonate. Acidity is also a stability variable for anything else in the formula. If the only active is carnitine, the difference is mostly taste and compatibility. If the capsule carries a second ingredient, the tartrate's acid should be checked against it before the form is fixed. ## Filling the capsule Fill weight is set by volume and bulk density, not by the label. The catalog does not fix bulk density, so the practical route is to ask for the figure on the lot and to run a fill trial on the machine that will be used. A powder at 40 mesh flows differently from the same powder milled to 80 mesh, and a granulated grade flows differently again. Two rules save a trial. First, size the shell for the tartrate's larger weight, not for the base's smaller one, and check that the capsule count per serving still matches the label. Second, test the base in the room where it will actually be filled: a dehumidified area changes the result, and a trial run in a dry laboratory does not predict a humid production hall. ## What the label has to say If the ingredient list says L-carnitine base, the declared quantity is carnitine. If it says L-carnitine L-tartrate, the figure is normally the salt, and a carnitine figure beside it needs its own conversion and its own basis. The same rule runs through the specification, the certificate and the panel: one name, one basis, one number. A switch from base to tartrate is a label change, not a sourcing change. The ingredient name changes, the milligram figure may change, and the capsule count may change with it. A brand that keeps the old panel and the new powder has a mismatch that a label review will find, and the correction is more expensive after the print run. ## When each form is the right one Choose the base when the smallest possible capsule or tablet weight matters, when the label already says L-carnitine, and when the plant can hold a dry room and a sealed pack. Choose the tartrate when the line runs fast, when the room is ordinary, when the label can name the salt, and when the extra mass still fits the shell or the tablet. Choose neither by habit: the certificate does not show flow, caking or fill weight, and those are the properties that decide the run. The forms are set out side by side on the grade page, and the water behaviour is followed through on the stability page. The release tests are on the COA page, the proof of configuration is on the identity page, and the packs and minimum are on the MOQ page. The product page carries the base specification. ### 03 L-carnitine base is hygroscopic; the pack decides the shelf life URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-carnitine/stability/ Reviewed: 2026-11-18 L-carnitine base is chemically robust as a dry solid; its failure mode is water. The powder picks up moisture from the air, softens and cakes, and the loss-on-drying limit of ≤0.5% is crossed long before the assay moves. What decides the shelf life is therefore the pack — the sealed foil pouch, the drum liner, the dose room — and the discipline of closing that pack after a partial weigh-out. A shelf life is assigned from data on the market pack, not from the molecule. In one lineThe molecule survives the shelf life; the powder does not, unless the pack keeps water out. ## The dry solid and its one weakness The crystalline base has no obvious oxidation pathway and no hydrolysable group, so it can sit in a blend without a special antioxidant. The weakness is physical: water adsorbs on the crystal surface, the surface begins to dissolve, and at high humidity the powder turns from free-flowing crystals into a sticky mass. The material is not chemically degraded, but it can no longer be weighed, blended or filled with any consistency. The specification reflects that. Loss on drying at ≤0.5% is a tight limit for a hygroscopic solid, and it is a limit on the pack as much as on the dryer. A lot released at 0.3% that sits in an opened pouch for a week in a humid room will not be at 0.3% when it is weighed, and the anhydrous assay will move with it. ## In solution the risk changes The base is freely soluble and close to neutral in water, which is convenient for a liquid and awkward for preservation: a near-neutral, water-rich system with no acid stress is a good place for microorganisms to grow. In an aqueous formula the questions are the preservative system, pH control and the finished-product microbial limit, not the stability of the carnitine itself. The acetyl form is different, because it carries an ester. An ester can hydrolyse, and the rate rises with pH and temperature, so an acetyl-L-carnitine beverage is a stability study in its own right while a carnitine base beverage is mainly a preservation study. The base has no such bond to break. ## What actually moves the powder Failure factors for L-carnitine base in a finished pack | Factor | Mechanism | What you see | Control | Humidity in the dose room | Water adsorption on the crystal surface | Weight gain, caking, bridging in the hopper | Dehumidified weighing and filling area | Open pack between weigh-outs | Unsealed liner admits room air | Lumps in the pouch, LOD drift | Reseal, desiccant where agreed, use the opened pack first | Heat during drying or granulation | Surface water redistributes; colour shifts | Off-white to cream tint, harder lumps | Control the drying end-point, not only the peak temperature | pH in a liquid matrix | Shifts the zwitterion and the taste | Acid or alkaline drift, microbial growth | Buffer and preservative system tested on the finished product | Reducing sugars in the blend | Browning reactions elsewhere in the matrix | Colour development in the stick or tablet | Test the blend, not the ingredient alone | Compaction and fine milling | More surface, more contact points | Hard caking in a compressed or milled powder | Granulate, or specify the mesh the process can handle One note belongs under the sugar row. Carnitine's nitrogen is quaternary and carries no hydrogen, so it does not start the browning reaction the way a primary amine does. A carnitine stick that darkens is reacting around the carnitine, not with it, and the fix belongs to the formula. ## A stability programme for the pack Run the study on the pack that will be sold, not on a lab jar. The usual conditions are 25 °C/60% relative humidity for the long term and 40 °C/75% for the accelerated arm, with time points at 0, 3, 6, 12, 24 and 36 months, and a glass-sealed control to separate the pack from time. Add two arms a food-ingredient study needs: an open-pack arm, where the pouch is opened, folded and stored as a customer would, and a cycling arm between the two conditions. Test appearance, loss on drying, assay and specific rotation at every point, and add particle size or flow where the powder is filled on a machine. Microbiology belongs at the start and the end, and after any open-pack interval. The conditions are borrowed from pharmaceutical practice because the numbers are comparable between suppliers; they are not a regulatory requirement for a food ingredient. ## Where a formula defeats a good pack A sealed pouch protects the powder until it is opened; the formula and the filling line decide what happens next. Gelatin and HPMC shells both transmit water, and a hygroscopic carrier can pull water into the shell or the film. A stick pack with a high water activity gives the powder a humid microclimate even when the factory air is dry, and an effervescent system adds acid, carbonate and a strong driving force for water uptake. The dose room is part of the formula. A 40-mesh powder exposed for twenty minutes in a room at 70% relative humidity takes up more water than the same powder exposed for two minutes, and the difference shows up as fill-weight variation rather than as a failed certificate. Granulation, an 80-mesh specification and a dehumidified filling area are the levers, and they are easier to specify at the start than to correct after a caking complaint. ## Assigning a shelf life A shelf life is a statement about a pack, a storage condition and a set of end-of-life limits. It should be written as all three: the pouch or drum, the maximum temperature and humidity, and the limits the product must still meet at the end. The end-of-life limits are agreed with the buyer; a common approach is to hold water and appearance at the release limits and allow the assay a defined margin, but the numbers have to come from the data rather than from habit. Two clauses prevent most disputes. The first covers the opened pack: reseal, store dry, use within the stated interval, and do not return the remainder to the original lot without a new test. The second separates a date of minimum durability from a re-test date, which is only useful if the buyer can act on it. The catalog does not publish a single shelf life for every destination, because the pack and the climate are not the same in every destination. The release tests are on the COA page; the packs that carry the moisture barrier are described on the MOQ page; the documentary side is on the compliance page. The base and the tartrate are compared for handling on the base versus tartrate page, the product page carries the specification, and loss on drying is defined in the glossary. ### 04 L-Carnitine: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-carnitine/moq/ Reviewed: 2026-11-18 An L-carnitine order starts at 1 kg, in a sealed foil pouch, and the standard production pack is a 25 kg fiber drum. The catalog lead time is 1–7 days from the point where the specification and the order are both confirmed. Everything else in the quotation follows from the form, the mesh, the pack and the destination, and those four lines are what a supplier needs before a number can be given. In one lineOne kilogram from a released lot, with that lot's certificate, is the minimum; the rest of the order is pack, mesh and destination. ## Why the minimum is one kilogram One kilogram is the smallest unit that still carries a lot identity. It is enough for a bench trial, enough for a second trial after the formula changes, and enough to keep a retained sample for the life of the project. Below that the material stops being a lot and becomes a hand sample, and a hand sample cannot support a release decision, a label claim or a comparison between two suppliers. The minimum is a packing unit, not a volume tier. A buyer who needs 500 g should ask for a sample rather than a split pouch, because a split pouch loses the sealed seam and the lot label that make the material traceable. A buyer who needs 30 kg should ask for the drum plus pouches, because the drum is a different pack with a different liner and a different freight profile. ## The packs, and what each one protects Standard packs · L-carnitine base | Pack | Net weight | Construction | Typical use | Watch | Foil pouch | 1 kg | Foil laminate, sealed seams | Bench trial, small batch, retained sample | The seal is the barrier; a folded top is not | Fiber drum | 25 kg | Fiber drum with sealed inner liner | Production batch | The liner, not the drum wall, keeps the water out For a hygroscopic base the pack is part of the specification. A pouch that has been opened and folded closed is not sealed, and a drum opened for a partial weigh-out is no longer a controlled environment unless the liner is closed again. The label should carry the product name, the form, the lot number, the net weight and the pack date, and the lot number should be the same string that appears on the certificate. A desiccant supports the liner where the destination climate or the storage time calls for one, but it is not a substitute for a sealed liner. If one is required, it belongs in the specification rather than in an assumption. ## Lead time The 1–7 day window is measured from two confirmations: the specification and the order. A quotation is not a confirmation, and an order placed against a different specification is a new order with a new clock. If the material is held in stock in the standard pack, the window is short; if the grade has to be milled to 80 mesh or granulated, the window starts when that step is scheduled, not when the enquiry arrived. Documents run on a parallel clock. A shipment into a market that wants a certificate of origin, a safety data sheet in a local format or a third-party certificate will not move on the commercial documents alone, so the document list should be agreed before the order is confirmed. A destination with a public holiday in the same week is a destination with a longer window in practice. ## What the quotation needs Six lines are enough to quote and enough to compare two quotations. A quotation that names only “L-carnitine 99%” and a quantity is not comparable with one that names a form, a basis and a pack, because the two may describe different drums. - The form and the mesh: base, tartrate or acetyl, and whether the powder is the standard 40 mesh, milled to 80 mesh or granulated. - The specification: assay basis and method, specific rotation, loss on drying, the contaminant panel and the particle size, with the version that will be released against. - The quantity and the pack: the number of 1 kg pouches, 25 kg drums, or both, and whether a desiccant is required. - The destination and the delivery term, so that freight and documents are quoted on the same basis. - The documents: certificate of analysis, specification, safety data sheet, origin and allergen statements, and the novel food or dietary ingredient statement for the market. - Any additional test or sample: a third-party rotation, a chiral check, or a sample drawn from the lot for the buyer's laboratory. ## Samples A sample should come from the lot that will be offered, not from a separate sample stock. Ask for the lot number on the sample bag and on the certificate, and confirm that the sample was drawn before the pack was sealed rather than scooped from an opened drum. The quantity should cover the trial plus a retained portion, because the buyer's laboratory will need both and a second request costs a week. A sample is also the moment to test what a certificate cannot show: how the powder flows, how quickly it dissolves, whether it cakes after a week on the bench, and whether the colour matches the previous lot. Those observations take a week and prevent a rejected drum. For a hygroscopic base, leave a portion in an open dish overnight and look at it in the morning; it is the quickest test a buyer can run. ## Where the terms stop Commercial terms belong in the quotation: this page describes the minimum, the packs and the lead time, and the quotation carries the rest. The minimum applies per form and per pack, so a mixed order is quoted line by line. The lead time is a commitment from confirmation, not from enquiry, and it assumes the specification that was quoted. Three boundaries are worth writing into the purchase order. The specification is the release document, so a change to the mesh, the water limit or the form is a new specification and a new quotation. The certificate travels with the lot, so the lot number on the certificate, the pack and the invoice should match. And a form claim is only a claim if it is documented: if the label says L-carnitine base, the order should require the base, not a salt that carries the same carnitine figure. The packs and the water question are followed through on the stability page, the release tests on the COA page, and the market requirements on the compliance page. The three forms are compared on the grade page, the product page carries the specification, and MOQ and lead time are defined in the glossary. ### 05 Where L-carnitine is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-carnitine/compliance/ Reviewed: 2026-11-18 L-carnitine is an established food ingredient in the European Union and a dietary ingredient in the United States, and the United Kingdom carries it under retained food law. Permission, dose and label wording are separate questions: the EU permits the substance but leaves the level to member states, the US permits it as a pre-DSHEA dietary ingredient, and the UK has kept the EU framework in Great Britain while Northern Ireland follows the EU regime. A file that answers only “is it allowed” is not yet a compliance file. In one linePermission is the easy part: the form, the national level rule and the label wording are what a market review actually has to settle. ## Three markets, three instruments One certificate can be sufficient in one market and incomplete in another. The table is a map, not a legal opinion: the text of each instrument and the national rule decide a specific product. Which instrument controls what · L-carnitine | Market | Main instruments | What they settle | European Union | Directive 2002/46/EC; Regulations 1169/2011, 1924/2006, 2015/2283 and 2023/915 | Supplement status, labelling, claims, novel food history and contaminants | United States | FD&C Act as amended by DSHEA; 21 CFR 111 and 101.36 | Dietary ingredient status, cGMP, Supplement Facts panel | United Kingdom | Food Supplements Regulations 2003 and equivalents; retained novel food law | Permission and labelling in Great Britain; Northern Ireland follows the EU regime In Great Britain the retained framework applies as of this review, but it is maintained by UK law, so changes can arrive on a different timetable. Northern Ireland is the exception: goods placed there follow EU rules under the Windsor Framework, so an EU-compliant file is the starting point and a GB-only file is not. ## The European Union L-carnitine has a documented history of use in food supplements before 15 May 1997 and is not treated as a novel food as of this review. That position should be documented, not assumed: if the history cannot be shown, the novel food question becomes the buyer's problem. Directive 2002/46/EC harmonises vitamins and minerals, and carnitine is neither. It sits among the substances the Directive leaves to national rules, so a member state may set a maximum level, require notification or restrict a form. There is no EU-wide answer to “how much is allowed”; the answer is national and has to be checked for every destination before the label is printed. Labelling follows Regulation 1169/2011 and the Directive, and the quantity per portion has to be stated. Carnitine has no Nutrient Reference Value in Annex XIII of 1169/2011, so a percentage of an NRV cannot be shown for it; a label that invents one has invented a figure. ## The United States L-carnitine was marketed as a dietary ingredient before 15 October 1994 and is not a new dietary ingredient as of this review. A different salt or a new form is a separate question, and the supplier should say which basis applies to the material being sold. A supplement is made under the cGMP rules in 21 CFR 111 and labelled with a Supplement Facts panel under 21 CFR 101.36. Carnitine has no Daily Value, so the panel declares the amount per serving without a percentage. A structure or function statement is permitted with the DSHEA disclaimer in 21 CFR 101.93; a statement about a disease is not. A conventional food is a different filing, and a supplement dossier does not cover a beverage. ## Contaminants: specification against law The heavy-metal lines are specification terms, and some coincide with a legal maximum. Coincidence is not margin: a limit at the legal maximum leaves nothing for analytical uncertainty. Catalog limits and the EU position for food supplements | Parameter | Catalog limit | EU legal position, as of this review | Lead (Pb) | ≤3 mg/kg | 3.0 mg/kg maximum under Regulation 2023/915; the catalog sits at the line | Cadmium (Cd) | ≤1 mg/kg | 1.0 mg/kg maximum for food supplements; the catalog sits at the limit | Mercury (Hg) | ≤0.1 mg/kg | 0.10 mg/kg maximum; the catalog sits at the line | Arsenic (As) | ≤2 mg/kg | No harmonised EU maximum for supplements; the line is contractual | Microbiology | APC, yeast and mould, absence tests | Not a contaminants-regulation limit; process hygiene and the buyer's specification In the US the position differs again, and California's Proposition 65 adds a warning threshold for lead and cadmium assessed per daily dose rather than per kilogram of powder. A lot can satisfy the specification and still raise a labelling question in one state. ## Claims and the edge of the label In the EU a health claim needs an authorisation under Regulation 1924/2006 and a place on the register. As of this review the register carries no authorised claim for L-carnitine, so a label that carries one needs the citation, and a paraphrase needs a lawyer rather than a copywriter. In the US the structure or function route is open with the disclaimer, but it rests on substantiation held by the brand owner and does not extend to a disease. Compositional statements are a different category: “L-carnitine 500 mg per capsule” describes the product, not a health effect, so specification and label must agree on the figure and its basis. This site makes no health claim for the ingredient; that decision belongs to the brand owner with the market's rules in front of them. ## What the file must contain - A lot certificate with methods, bases and results, matching the lot code on the pack. - The versioned specification it was released against, naming form and mesh. - A safety data sheet, and an allergen statement covering the material and the pack. - A manufacturing site and country-of-origin statement naming the actual producer. - An EU novel food statement that shows the pre-1997 use, not only the conclusion. - A US dietary ingredient statement, or the notification for a form that is genuinely new. - A food-contact declaration for the pouch or liner, under the destination's framework. - A stability summary and the assigned shelf life for the pack, with any halal or kosher certificate the supplier holds. ## A short review checklist - The form is named on the specification, the certificate and the label, and all three agree. - The destination's level rule has been checked, not assumed from the EU position. - The contaminant limits are compared with the legal maximum, and the margin is written down. - The label quantity states its basis: carnitine or the salt. - Any claim has a register entry in the EU, or substantiation and the disclaimer in the US. - The lot code runs through the certificate, the pack and the retained sample. - A change of form, source or site triggers a new specification and a new review. The market instruments are summarised on the EU regulatory page, the US page and the UK page. The release tests are on the COA page, the pack is described on the stability page, and the product page carries the catalog specification. NRV and heavy metals are defined in the glossary, and the site's position is set out in the editorial policy. ### 06 How we prove an L-carnitine lot is the L form URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-carnitine/identity/ Reviewed: 2026-11-18 The L form is proved in layers: the paper trail names the substance, infrared and HPLC confirm that the substance is carnitine, the specific rotation assigns the configuration, and the counter-ion and water confirm which physical form is in the drum. No single test does all four jobs, and an assay result does none of them on its own. A lot that reads 99.5% can still be the wrong enantiomer, a salt rather than the base, or a blend. In one lineThe rotation and the chromatogram prove the configuration; the assay proves only how much material is there. ## Four layers of identity Start with what the document says, then move to what the instrument measures, then to the configuration, then to the form. Each layer answers a different question, and each has a blind spot that the next layer covers. Identity layers for L-carnitine and what each one misses | Layer | Question | Test | Blind spot | Record | What is this lot supposed to be? | Name, CAS number, lot code, specification | Says nothing about the drum | Substance | Is it carnitine? | Infrared spectrum, HPLC retention and assay | Cannot separate the enantiomers | Configuration | Is it the L form? | Specific rotation, chiral HPLC | Weak on quantity; needs clean optics | Form | Base, salt or ester? | Counter-ion tests, water, titration | Silent on configuration The order matters. A buyer who starts with the assay is looking at the one number that is compatible with every failure mode on the list. ## The enantiomeric ratio Specific rotation is how the enantiomeric ratio appears in a polarimeter. The measured rotation is divided by the path length in decimetres and the concentration in g/mL to give the specific figure, and the result is compared with the range for the pure enantiomer. On a 10% solution the reading is small, so the cell, the temperature and the balance all matter; a certificate that prints −30.4° without saying how it was obtained is asking to be believed rather than checked. The window of −29.0° to −32.0° is a practical gate, not a purity grade. If the pure material reads near the middle of the window, the lower edge corresponds to a few per cent of the D enantiomer in the sample. Two lots can both sit inside the window and differ in enantiomeric composition, which is why the number itself, not only a pass mark, belongs on the certificate. For a salt there is a second ratio: the stoichiometry. L-carnitine L-tartrate is a 2:1 salt, so a tartrate certificate should be consistent with two carnitine units per tartaric acid unit. A salt that is off that ratio is either a different salt or a blend, and neither is what the label says. ## What XRD can and cannot tell you X-ray diffraction reads the crystal lattice, and carnitine is crystalline, so a diffraction pattern is a genuine fingerprint of the solid form. It is useful for checking that a lot is the same crystal form as the reference, and for catching a different salt or an amorphous or recrystallised material that dissolves and flows differently. It cannot assign the configuration. The two enantiomers are isostructural, and a physical mixture of L and D crystals gives the pattern of the L crystal, because the lattices are identical. A racemic compound — a distinct crystal containing both enantiomers in the unit cell — can give a different pattern, so XRD may raise a flag; it cannot clear one. The same limitation applies to the infrared identity test: the functional groups are the same in both enantiomers, so the spectrum is too. Use XRD for the form question and keep it away from the configuration question. A supplier who offers a diffraction pattern as proof of the L form has offered the wrong evidence. ## The substitution routes to check Four routes are worth testing for, and each has a different signature. The first is the opposite enantiomer. D-carnitine, or a racemic DL mixture, passes an assay and moves the rotation toward zero; only polarimetry or chiral HPLC sees it. The second is another betaine: trimethylglycine or choline is a white, water-soluble powder that can inflate a non-specific nitrogen assay, and a chromatographic method with a proper carnitine standard separates them while a titration may not. The third is a salt sold as the base: the tartrate carries about 68% carnitine, so a carnitine assay run on it reads low, but a seller who quotes the carnitine figure as if it were the powder weight is describing a different material. The fourth is simple dilution with a white carrier, which lowers the assay and usually moves the water or the residue with it. Each route is caught by a different line on the certificate, which is why the identity page and the COA page have to be read together. ## How to write the specification line A specification that can be enforced names the form, the basis and the configuration in the same breath. A workable line reads: “L-carnitine base, 98.0–102.0% on the anhydrous basis by HPLC; specific rotation −29.0° to −32.0° on a 10% solution; loss on drying ≤0.5%; residue on ignition ≤0.1%; D-carnitine not more than the agreed limit by chiral HPLC.” Three details make that line enforceable. It says “base”, so a tartrate cannot be delivered against it. It says “anhydrous basis”, so the water correction cannot be applied silently. And it puts the chiral limit in the specification, because a limit that exists only in a conversation does not survive a supplier change. Where the form is a salt, add the counter-ion and the stoichiometry. Where the material is milled or granulated, add the mesh. The specification is the document the certificate is judged against, so every test on the identity list should appear in it. ## Five questions for a supplier - Is the specific rotation measured on this lot, and with which solvent, concentration, temperature and path length? - Which HPLC method and which standard produced the assay, and is the figure on the anhydrous basis? - What is the D-carnitine result, by which chiral method, and what is that method's detection limit? - Is the material the base, the tartrate or the acetyl form, and which counter-ion is present in this lot? - Where was the lot manufactured, and can the batch record for the crystallisation and drying steps be shared under an agreement? A supplier who can answer all five is selling a specified material. A supplier who answers only the assay has described a white powder. The certificate those answers should appear on is described on the COA page; the forms are compared on the grade page and on the base versus tartrate page. The product page carries the catalog specification, the separation is explained in the HPLC method note, and assay is defined in the glossary. ### 01 What the COA for magnesium citrate actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-citrate/coa/ Reviewed: 2026-11-18 Every lot of magnesium citrate ships with a certificate that carries nine lines: appearance, the magnesium assay, the citrate identity, loss on drying, pH, particle size, bulk density, the heavy-metal panel and microbiology. The lines are fixed by the specification; the results belong to the lot. Two of those lines go to identity, the rest describe its condition, and the sheet is only as useful as the method printed beside each figure. In one lineA magnesium figure does not identify the salt: the certificate has to carry the citrate identity, the water and the hydrate basis beside the metal. ## The certificate as a single sheet A release certificate is written against the specification, not a catalogue description, so every line has three parts: parameter, method and limit. A result with no method cannot be repeated by a second laboratory; a limit with no result is a promise rather than a measurement. Batch COA · anhydrous magnesium citrate, 14.5–16.4% magnesium | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Magnesium (Mg) | Complexometric EDTA titration | 14.5–16.4% | Citrate identity | Citrate reaction and infrared spectrum | Conforms to reference | Loss on drying | USP <731>, 105 °C | ≤2.0% | pH (5% suspension) | Potentiometry | 5.0–8.0 | Particle size | Sieve analysis | ≥95% through 40 mesh | Bulk density | Graduated cylinder | 0.50–0.80 g/mL | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and enrichment | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent The microbiological limits are agreed before the lot is made, never chosen after the result is known. ## What the magnesium figure is measured against The magnesium line is a complexometric titration. EDTA is added at about pH 10 in the presence of a metal indicator, it binds the magnesium ion in a 1:1 complex, and the volume consumed is converted into a percentage of the sample. The method is precise and blind: it counts magnesium atoms and cannot see whether they sit on citrate, oxide or carbonate. The molar arithmetic is fixed. Magnesium citrate is Mg₃(C₆H₅O₇)₂ — three divalent magnesium ions balancing two trivalent citrate ions — with a molar mass of about 451 g/mol for the anhydrous salt. Magnesium contributes 72.9 g/mol of that total, or 16.2%, and the catalogue range of 14.5–16.4% brackets the calculation. Counted as C₆H₅O₇, citrate makes up about 84% of the same molecule — the figure to hold beside the magnesium when a drum is checked. The hydrate is the second half of the basis. The nonahydrate adds nine water molecules, about 162 g/mol, and drops to about 11.9% magnesium. A certificate reporting 11.9% is not a weaker salt; it is a heavier molecule carrying the same anion. That is why the loss-on-drying line belongs next to the assay, and why a specification that names the salt but not the hydrate has not described the drum. The hydrate glossary entry sets out the arithmetic. The identity lines cover what the titration cannot. The citrate reaction precipitates the anion as calcium citrate from a neutral solution, and the infrared spectrum is compared with a reference — carboxylate bands near 1600 and 1400 cm⁻¹, the broad water band near 3400 cm⁻¹. An identity result is a yes or a no, so the sheet should also name the reference the lot conformed to. ## Release limit, batch result and the word “conforms” A release limit is the gate and a batch result is the measurement. The sheet needs both, in the same row as the method. “Passes specification” is a conclusion, not evidence, and cannot be audited without the figure behind it. Identity lines behave differently from assay lines. Magnesium is a number inside a range; citrate identity is reported as “conforms”. That word is worth something only when the standard, the analyst and the date of the comparison are traceable. A conformity with no named reference is a blank with a stamp on it. Some parameters pass anywhere inside the range and still differ in behaviour downstream. Bulk density inside 0.50–0.80 g/mL passes at either end, yet a lot at 0.51 g/mL and a lot at 0.79 g/mL behave differently in a hopper and a capsule die. ## What changes between lots The magnesium figure follows the reaction and the crystallisation: the ratio of magnesium source to citric acid, the completeness of salt formation, and the losses in filtration and drying. Incomplete drying leaves water in the powder, which lowers the magnesium on a mass basis and raises loss on drying at the same time. Read the two lines together for exactly that reason. Particle size follows milling and sieving, and bulk density follows the particle shape that results, with moisture as a second input. The pH of the 5% suspension follows the washing step and the citrate left in the liquor. None of these is a defect; they are the normal spread of a crystallised solid, and they are why the specification is written as a range. Colour is the least quantitative signal and often the earliest warning. A grey or dull tint can point to iron pickup from the dryer, to overheating, or to a different magnesium source. The assay can still pass. A tint is a prompt to pull the batch record; on its own it is not grounds for rejection. ## When to send a lot to a second laboratory A second laboratory earns its fee at four moments: an unfamiliar source, a debut shipment to a regulated market, a label that names a form, or a dispute that needs a neutral reading. The useful panel closes the gap the certificate leaves open rather than repeating it. For this salt that usually means an independent citrate identity by infrared comparison, water by Karl Fischer rather than loss on drying alone, an ICP-MS panel on the same sample, and an X-ray diffraction screen for crystalline magnesium oxide. The titration method page explains what the EDTA figure can and cannot support. The retained sample, the supplier's certificate and your own specification should go out together. Ask for the four tests that decide the form; a full repeat of the certificate rarely settles the question that caused the dispute. ## What to compare between two suppliers Put six lines side by side: the salt and its hydrate state, the magnesium range and method, the citrate identity method and its reference, the loss-on-drying limit with its temperature, the mesh and bulk density, and the contaminant method with its detection limits. A supplier who answers five of the six is describing a different drum. The second layer is traceability. The certificate lot number, the drum label and the retained sample should carry one identifier between them, and the certificate should name the manufacturing site. An accurate certificate can still describe a lot that is not the one in your warehouse. The catalogue line this page describes sits on the magnesium citrate product page. The grade comparison settles the hydrate, the identity page covers the tests that separate the salt from a blend, and the quality page shows how the release file is assembled. ### 02 Anhydrous or nonahydrate: choosing a magnesium citrate grade URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-citrate/grades/ Reviewed: 2026-11-18 Magnesium citrate is sold as the anhydrous salt and as the nonahydrate, and the two are the same anion carrying different amounts of water. The anhydrous grade carries 14.5–16.4% magnesium and is the grade specified on this site; the nonahydrate carries about 11.9% and is quoted against its own specification. The choice between them is a fill-weight and label decision before it is a quality decision. In one lineThe two grades are the same salt with different water; the choice is a fill-weight and label decision, not a purity one. ## The hydrate is part of the identity Water of crystallisation is not surface moisture that a dryer can remove at will. It is built into the crystal lattice, it changes the molar mass, and it therefore changes how much magnesium a kilogram of powder contains. Anhydrous magnesium citrate is Mg₃(C₆H₅O₇)₂ at about 451 g/mol. The nonahydrate is the same formula plus nine water molecules, about 613 g/mol, and the water is roughly 26% of the mass. A purchase order that says “magnesium citrate” has therefore named a family, not a material. Two drums that answer to that name can differ by a third in the mass needed for the same label claim. The hydrate belongs in the specification, in the technical data sheet and on the certificate, because it decides the arithmetic that follows. ## The two grades side by side Magnesium citrate grades · what changes between them | Grade | Water | Elemental Mg | Loss on drying | Fits | Watch | Anhydrous, 40 mesh | None in the lattice | 14.5–16.4% (EDTA) | ≤2.0% | Capsules, tablets, high-dose powders | Greater drive to take up water | Nonahydrate | Nine molecules, about 26% | About 11.9% | About 26%, against its own limit | Sticks, beverages, gummies | About a third more mass per milligram | Milled, 80 mesh | As the base grade | As the base grade | As the base grade | Capsules, suspensions | Dust, flow, blend segregation | Granulated | As the base grade | As the base grade | As the base grade | Tablets, sachets | Granulation aids must be declared The last two rows are process variants, not different chemistry. Milling and granulation change particle size, bulk density and dust; they do not change the magnesium figure, and they should not be used to explain one. ## What the drum carries The anhydrous grade specified here is a 40 mesh powder: at least 95% passes a 425 µm sieve, and bulk density runs at 0.50–0.80 g/mL. That range is wide enough to feel like two materials. A lot at the dense end fills a capsule or a tablet die with more mass per stroke than a lot at the light end, and a formulator who qualified on one end will notice the other. Flow and caking follow moisture more than they follow the hydrate label. The anhydrous salt has a stronger driving force to pick up water from the air, because it can move toward a hydrate; the nonahydrate begins with its water already in place. That does not make the nonahydrate immune to caking, but it explains why an opened anhydrous liner in a humid room can change behaviour within a shift. For the nonahydrate, ask for the bulk density and the mesh on the certificate rather than assuming they match the anhydrous range. Crystal habit and drying route differ between producers, and the number that matters is the one on the document for the lot you are buying. The bulk density entry explains how the figure is measured. ## What changes in the finished product The fill weight is the first consequence. At 16.2% magnesium, 100 mg of elemental magnesium needs about 617 mg of the anhydrous salt; at 11.9%, the same dose needs about 840 mg of the nonahydrate. On a fixed 500 mg capsule fill, the two grades deliver about 81 mg and about 60 mg of magnesium, so a 100 mg label claim that ran in one capsule on the anhydrous grade may need a larger capsule or a second one on the hydrate. Capsule geometry compounds the arithmetic. A size 00 capsule at the dense end of the range holds roughly 600 mg of this powder, which is about 97 mg of magnesium from the anhydrous grade and about 71 mg from the nonahydrate at a similar density. Those are estimates, not fill-weight guarantees: the press trial and the certificate decide the final figure. The label is the second consequence. In the European Union the ingredient list names the magnesium source as listed for food supplements, and the nutrition declaration reports magnesium in milligrams and as a percentage of the 375 mg reference intake. If the powder weight stays the same while the hydrate changes, the declared magnesium moves by roughly a third — a change that needs a new label, not a note in the batch file. The compliance page takes the labelling rules further. Taste and dissolution favour the hydrate in some formats. Both grades dissolve, but the nonahydrate is the salt most often used in sticks and beverages, where it disperses readily; the citrate note is salty-sour and grows with dose, so the matrix has to carry it either way. In a capsule or a tablet the taste is irrelevant and the mass per dose is what matters. ## How to write the specification - “Magnesium citrate, anhydrous, 14.5–16.4% Mg by complexometric EDTA titration.” - “Citrate identity by reaction and infrared spectrum, conforms to reference.” - “Loss on drying ≤2.0%; pH of 5% suspension 5.0–8.0.” - “≥95% through 40 mesh; bulk density 0.50–0.80 g/mL.” - “No added magnesium oxide, magnesium carbonate or citric acid.” For the nonahydrate, replace the first line with the hydrate name and its own magnesium range, and replace the drying limit with the water figure the grade is sold against. A specification copied from the anhydrous line and applied to a hydrate will fail every lot, and the supplier will be right. ## When not to switch A hydrate switch is the wrong answer to a problem the grade did not cause. If a capsule is at its fill limit and the label has room to be recalculated, the anhydrous salt buys headroom — but the stability data, the label and the approved specification all belong to the old grade, so the move is a change control rather than a substitution. If the nonahydrate flows well, dissolves in the intended matrix and the label has room for the extra mass, it is a legitimate choice and there is nothing to upgrade. The reverse is also true: paying for the concentrated grade is only worth something when the fill weight, the capsule count or the freight actually depend on it. The fill-weight page works the arithmetic through, and the COA page shows where the hydrate is declared on the certificate. ### 02.1 Anhydrous vs nonahydrate magnesium citrate: the fill-weight question URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-citrate/grades/anhydrous-vs-nonahydrate/ Reviewed: 2026-11-18 The two grades differ by water and nothing else chemically: the anhydrous salt is Mg₃(C₆H₅O₇)₂ at about 451 g/mol and 16.2% magnesium, while the nonahydrate carries nine water molecules, about 613 g/mol and 11.9% magnesium. For the same label claim the hydrate needs roughly a third more powder, and that difference lands on the capsule size, the tablet weight or the stick-pack fill. In one lineThe nonahydrate carries about 11.9% magnesium against about 16.2% for the anhydrous salt, so switching grade moves the capsule fill weight by roughly a third. ## One salt, two solids Magnesium citrate is the salt formed when three magnesium ions balance two trivalent citrate ions. The anhydrous grade is that lattice on its own, quoted under CAS 3344-18-1. The nonahydrate is the same lattice with nine water molecules built into it, and it is normally quoted under its own CAS number and its own specification — confirm which number your purchase order cites, because the two documents describe different solids. Neither form is more “pure” than the other. The nonahydrate is a fully formed crystal that happens to contain water; the anhydrous salt is the same crystal without it. A certificate showing 11.9% magnesium is not describing a weaker material; it is describing a heavier molecule. ## The arithmetic per dose The calculation is a division. Take the elemental dose the label claims and divide by the magnesium fraction of the grade: 16.2% for the anhydrous salt and 11.9% for the nonahydrate. The result is the mass of powder the formula has to carry. Powder mass needed for a magnesium dose, by grade | Elemental magnesium | Anhydrous salt, 16.2% | Nonahydrate, 11.9% | Extra mass | 50 mg | about 309 mg | about 420 mg | about 111 mg | 100 mg | about 617 mg | about 840 mg | about 223 mg | 150 mg | about 926 mg | about 1,261 mg | about 335 mg | 200 mg | about 1,235 mg | about 1,681 mg | about 446 mg The percentages are calculated from the formula, so read the table as a planning figure rather than a fill-weight release. A lot at the bottom of a magnesium range needs more powder than a lot at the top, and the certificate for the lot is what the press or the capsule machine should be set against. ## What the water does Nine water molecules weigh about 162 g/mol, which is 26.4% of the nonahydrate. That single number explains the loss-on-drying line. The anhydrous grade is specified at ≤2.0% because it has almost no lattice water to lose; the nonahydrate will report around 26% and that is the correct result for the grade, not a wet lot. It also means a nonahydrate cannot be accepted against an anhydrous specification. The drying limit is not a tolerance that a hydrate can be argued into; it is a different measurement of a different solid. When the hydrate is the disputed point, Karl Fischer water is the more direct test, because loss on drying at 105 °C can leave part of the water behind in some crystal forms. Water also changes the powder's behaviour before it reaches the press. The anhydrous salt has a stronger drive to take up moisture from the air because it can move toward a hydrate; the nonahydrate is already there. Both cake if they are stored wet, but the anhydrous grade is the one that changes weight and flow in an open liner. ## The fill weight in practice A 500 mg capsule fill delivers about 81 mg of magnesium from the anhydrous salt and about 60 mg from the nonahydrate. A label claim of 100 mg elemental magnesium therefore needs a larger capsule, a second capsule, or a denser fill on the hydrate, and that is the decision the capsule-count calculation is really about. Capsule geometry sets a ceiling. A size 00 capsule takes about 0.95 mL, so at 0.65 g/mL it holds roughly 600 mg of this powder — about 97 mg of magnesium from the anhydrous salt and about 71 mg from the nonahydrate at the same density. One capsule per dose is realistic on the anhydrous grade; on the hydrate it usually is not. Tablets have the same constraint in a different shape. A 1,000 mg tablet weight is a large tablet for most consumers, so a 100 mg claim on the nonahydrate is already at 840 mg of active powder before any excipient. Stick packs and sachets are more forgiving of mass, which is one reason the hydrate is common in those formats. ## Flow, density and processing The anhydrous grade specified here is a 40 mesh powder with a bulk density of 0.50–0.80 g/mL, and that range is wide enough that two lots can feel like two materials on the same press. For the nonahydrate, ask for the bulk density and the mesh on the certificate for the lot rather than assuming they match. Crystal habit and drying route move those figures more than the hydrate name does. If flow is the problem, granulation is usually a better answer than a change of hydrate. Granulating the anhydrous salt gives a denser, more uniform particle without giving up the magnesium per gram, whereas switching to the nonahydrate buys flow but needs a third more mass per dose. ## What has to change on the label In the European Union, the ingredient list names the magnesium source and the nutrition declaration reports magnesium in milligrams and as a percentage of the 375 mg reference intake. In the United States, the Supplement Facts panel states the elemental magnesium figure against a 420 mg Daily Value, and the ingredient list names the salt. In both markets the salt name is the same word, which is precisely why the declaration matters: the consumer cannot see the hydrate from the ingredient list. If the label quantifies the ingredient, the figure has to be recalculated when the grade changes. A product declaring 1,000 mg of magnesium citrate provides about 162 mg of magnesium on the anhydrous grade and about 119 mg on the nonahydrate. Keeping the old declaration after a silent grade change is a labelling error that no certificate will catch. The hydrate belongs in the specification, the technical data sheet and the certificate, where the buyer and the auditor will look for it. The compliance page sets out the label rules in full. ## Choosing between them - Choose the anhydrous salt when the capsule size or the tablet weight is fixed, the dose is high, and the label is already approved. - Choose the nonahydrate when the format is a stick, a beverage or a gummy, where mass is available and the hydrate disperses readily. - Choose neither on the drum weight alone; compare the mass needed per dose. - Run a grade change as a change control: new specification, new stability data, new label arithmetic. The grade comparison places both forms among the milled and granulated variants, the COA page shows where the hydrate is declared, and the stability page covers what each grade does in the matrix. ### 03 Magnesium citrate is stable dry; the hydrate and the matrix decide the rest URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-citrate/stability/ Reviewed: 2026-11-18 Magnesium citrate is a crystalline salt that keeps well in a sealed pack. The anhydrous grade is the more eager of the two to take up water, because it can move toward a hydrate; the nonahydrate starts with its water already in place. Most shelf-life problems begin in the matrix rather than the powder: the pH, the other cations in the formula and the pack decide what happens next. In one lineThe dry powder keeps well; moisture, the pH of the matrix and the other cations in it are what decide the shelf life. ## The powder in its pack In the unopened 25 kg fiber drum, with the food-grade liner sealed, the salt is stable at ambient temperature. It is an ionic solid with a defined crystal form, and the magnesium assay has nothing to drift toward. Water is the practical risk: leave the liner open in a humid room and the powder draws moisture in, and on the anhydrous grade part of that water enters the crystal rather than staying on the surface. Loss on drying is therefore a release parameter and a storage indicator at the same time; the method entry covers how the figure is obtained. A lot that arrives at 0.4% and sits open at 70% relative humidity can move toward 1.5% in a working week, and the visible signs are caking, a change in bulk density and bridging in the hopper. The fix is procedural before it is chemical: reseal the liner, keep the drum in a dry store, and add a desiccant where the destination climate asks for one. The powder is not light-sensitive in any practical sense, and the white to off-white colour is stable in a sealed pack. A tint that appears after storage is a moisture or metal signal, not a photodegradation signal. ## In solution, and the citrate reaction A 5% suspension sits at pH 5.0–8.0, slightly acidic to neutral. That range is a property of the salt, not a defect: citrate is the conjugate base of a weak acid, and the salt buffers around its own pH. In a beverage, the matrix pH moves the material in two directions. Below about pH 4, the citrate is progressively protonated to citric acid. The magnesium is released as the free ion, solubility rises, and the taste sharpens toward sour. That is usually workable in a carbonated or fruit-flavoured drink, provided the acid level is deliberate and the preservative system covers the water activity. Above about pH 9, the equilibrium turns the other way and magnesium can begin to precipitate as the hydroxide, which shows up as haze or sediment rather than as an assay loss. Between those two ends the salt stays dispersed, but it is no longer the only species in the water. Citrate binds divalent and trivalent cations, so a formula that also carries calcium, iron or zinc sets up a competition. Calcium citrate is only sparingly soluble, and a clear drink that adds both salts can throw a haze that neither ingredient shows alone. Iron citrate complexes can shift colour from white toward yellow or green. Heat accelerates all of it: dissolution, ligand exchange and the browning that comes from any reducing sugar in the matrix. A bench trial at the real pH, the real mineral load and the real process temperature tells you more than a room-temperature solubility check. ## What moves the figure Stability factors · magnesium citrate in storage and in formula | Factor | Effect | Control | Moisture | Higher loss on drying, caking, hopper bridging | Sealed liner, dry store, desiccant | pH below 4 | Protonation, sharper taste, higher free magnesium | Set the acid level deliberately; trial the taste | pH above 9 | Haze or sediment as magnesium hydroxide | Buffer the matrix; avoid alkaline systems | Calcium in the matrix | Sparingly soluble calcium citrate, haze | Separate the minerals or accept a cloudy format | Iron and zinc | Ligand exchange, colour shift | Specify trace-metal limits; trial the blend | Heat | Faster exchange, browning with reducing sugars | Lower process temperature, control water activity | Pack | Moisture vapour and odour transfer | Foil laminate for sticks; sealed liner for drums ## The test protocol A bulk study puts the powder into the commercial pack and holds it at 25 °C/60% RH and at 40 °C/75% RH. Sample points fall at 0, 2, 6, 12 and 24 months, and every point is tested for magnesium, loss on drying, pH, appearance, particle size and microbiology. The warmer condition exists to pull a trend into view inside the study window; it is not a storage recommendation. An in-matrix study is a separate exercise. The finished capsule, tablet, stick or gummy goes into 30 °C/65% RH and 40 °C/75% RH chambers and is tested for magnesium, moisture, colour, taste and, where relevant, dissolution or disintegration. The dosage form can fail while the powder in the drum still passes, and the dosage-form result is the one the brand needs. ## Formulation and packaging A capsule or a tablet protects the powder, and what threatens it there is moisture and the excipient list. A direct-compression blend needs a lubricant that does not bring water, and a hygroscopic anhydrous grade benefits from a sealed blister or a tight HDPE pack with a desiccant. A granulated grade usually flows better but may carry a binder that has to be declared. In a stick pack the pack is the product: start from a foil laminate, heat-sealed and with a low moisture-vapour transmission rate, and regard a paper or clear construction as a retail choice that has to be backed by data. In a gummy or chew the sugar system, the water activity and the pH dominate, and the citrate note has to be masked. In a drink, the pH and the preservative system outrank the choice of grade, and a clear format needs the calcium and iron interactions checked before launch. ## Where the shelf life comes from The period is whatever the study on that grade and that pack supports; there is no default figure attached to the molecule. The technical data sheet names the storage condition and either a retest period or an expiry date — retest for a bulk ingredient that is checked again before use, expiry for a pack that goes to a consumer. Where the data do not reach the pack, the matrix or the climate, the answer is a shorter period or another study. Re-testing an old lot once and moving the date out is not a shelf life. The COA page sets out the parameters tracked over time, the ordering page lists the packs a study must cover, and the quality page describes the record keeping. ### 04 Magnesium citrate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-citrate/moq/ Reviewed: 2026-11-18 Orders for magnesium citrate start at one kilogram: a foil pouch drawn from a released lot, with that lot's certificate in the same carton. Production moves to a 25 kg fiber drum. Confirmation to dispatch runs one to seven days, and what goes into the reply depends on the grade, the quantity and the market the drum is travelling to, not on a headline figure. In one lineA kilogram is enough to qualify the grade; production runs from the 25 kg drum, and the quotation is assembled from grade, quantity and market. ## Where the one-kilogram minimum comes from A first order is a qualification exercise, not a stock purchase. A kilogram is enough for a bench trial, a short stability pilot and a small capsule or tablet batch, taken from a lot that has already been released — not out of a sample cabinet. What the buyer tests is then the material that will arrive on a pallet, certificate included. The minimum is not a volume threshold. It is the smallest quantity that can be packed, labelled and documented without creating a lot that exists only to be a sample. Above one kilogram, packing follows the same lot where its size allows; where it does not, a new lot is made and a new certificate follows it. One point is worth settling before the order rather than after it. The catalog line on this site is the anhydrous salt at 14.5–16.4% magnesium. The nonahydrate is quoted against its own specification, with its own magnesium range and its own drying limit. A one-kilogram trial of the wrong hydrate will produce a perfectly good certificate for a material the label cannot use. ## Packaging Standard packs · magnesium citrate | Pack | Use | Notes | 1 kg foil pouch | Qualification and bench work | Heat-sealed food-grade liner; lot label on the pouch | 25 kg fiber drum | Production | Sealed food-grade liner, tamper-evident closure | Pallet | Bulk shipment | Stretch-wrapped, lot labels facing out The liner is a component of the pack, not a packing extra. A drum whose liner is not sealed is storing the powder differently, and nothing on the certificate tells you which way it travelled. If the destination is humid, say so in the order: a desiccant can be added and the packing specification can name it. Every pouch and drum is labelled with the product name and hydrate, the lot, the certificate reference, the net weight and the storage condition. A pack that arrives without a lot number cannot be matched to a certificate, a retained sample or a stability file. ## Lead time The indicative lead time is one to seven days from confirmation of the specification and the order. The count begins at the point where grade, quantity, packing and documents are settled together; an enquiry against an open specification is not yet an order, so it cannot start anything. Four things extend it, and all four are avoidable. A particle size below the catalog 40 mesh is a milling run. A granulated grade is a separate process. A third-party test has to be booked and reported. A destination that needs a document pack, a certificate of origin or a specific language on the label adds administrative time. Flagging any of them in the first message is what keeps the date short, and the quotation lists the added days separately. ## What the quotation needs - The salt and its hydrate — or the specification you want matched. - A first quantity and a rough annual figure. - Where the powder is going: capsule, tablet, stick, gummy or drink. - The destination country, and the paperwork it demands. - The mesh and the bulk density your line can handle. - The date the shipment has to land. A competitor's certificate is often a quicker start than a written specification: it shows the methods and limits your quality team already works to. Send it and the reply can be a counter-specification that says what can be matched and what cannot. What the reply will not contain is a figure per kilogram: packing, freight and documents change with the destination, so the commercial part is quoted against the actual order. ## Samples Sample packs run 100–500 g, taken from a released lot, with that lot's certificate in the box; the usual turnaround is three to five working days after the specification is settled. A sample that arrives without its certificate cannot be tied to a lot record, and a trial run on it cannot be repeated. Freight for the sample is quoted alongside it. The sample must also be the grade that will ship: a trial on the anhydrous 40 mesh powder says nothing about a milled 80 mesh or granulated version, and a trial on a hydrate says nothing about the anhydrous line. If the trial is meant to qualify a process variant, ask for that variant. ## Payment and terms Payment terms, Incoterm and the document list are agreed in the order confirmation. They vary with the destination, the order value and whether the account is new, so they are written into the quotation rather than posted as a house rule. Claims are handled against the retained sample and the lot certificate. If a pack arrives damaged, or the material does not match the document, report it on receipt with photographs of the carton and the lot label; the claim is then checked against the lot record before anything is used. The COA page sets out what the certificate carries, the grade page explains the hydrate choice, and the quality page describes how the lot record and the retained sample are kept. The product line itself is on the magnesium citrate hub. ### 05 Where magnesium citrate is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-citrate/compliance/ Reviewed: 2026-11-18 Selling magnesium citrate into a market comes down to four questions, not one: is the salt a permitted magnesium source there, are the contaminants inside the ceiling, does the label name what is in the drum, and is the claim authorised? Each is a separate test with its own instrument, and no single certificate answers all four. In one linePermission, contaminant limits, label wording and claim rules are four separate tests in every market, and passing one does not settle the others. ## The four checks Permission comes from a list. The European Union publishes the vitamin and mineral substances that food supplements may use; the United States works through its dietary-ingredient provisions; the United Kingdom maintains a retained list of its own. An entry on one list says nothing about another list, and an entry never removes the limits that sit underneath it. Purity is a ceiling applied to the finished supplement rather than to the drum. Labelling is another rule again: the source must be named the way the law names it, and the elemental magnesium must appear in the nutrition declaration. Claims form a third discipline — an authorised nutrition claim, a structure/function statement and a disease claim are three different legal objects, and only the first two are open to a supplement brand. ## European Union Annex II of Directive 2002/46/EC carries the permitted vitamin and mineral substances for food supplements, and magnesium salts of citric acid appear there as a magnesium source. That entry opens the door; it does not finish the job, because the finished product still needs its Member State notification, its contaminant file and a label that follows the general rules. The EU regulatory summary gathers the instruments in one place. Magnesium is declared in milligrams and as a share of the 375 mg reference intake for adults. If the label also quantifies the ingredient, the figure has to be consistent with the salt and the hydrate in the drum: 1,000 mg of the anhydrous salt at 16.2% magnesium delivers about 162 mg, while 1,000 mg of the nonahydrate delivers about 119 mg. A declaration that mixes the two is a labelling error even when the assay is correct. Contaminants fall under Regulation (EU) 2023/915, which replaced the earlier contaminant regulation and expresses the supplement limits per kilogram of product as sold. Those limits are not the same thing as a raw-material specification, and the gap between the two is where most of the compliance work sits. ## United States In the United States, magnesium citrate is marketed as a dietary ingredient. The seller has to be able to show that the material is a lawful dietary ingredient for the intended use, and that basis belongs in the supplier file rather than in an assumption that magnesium is an essential nutrient and therefore exempt. Premarket approval is not part of the route, but the label, the claims and the manufacturing records still are. The Supplement Facts panel states the elemental magnesium figure against a 420 mg Daily Value for adults and children aged four and over, while the ingredient list names the salt. A product that blends magnesium citrate with another magnesium source has to name both, and a product that declares only elemental magnesium has told the consumer nothing about the salt. California Proposition 65 runs in parallel with the federal position and is triggered by the daily dose rather than by the concentration alone. A lot inside the EU limit can still need a California warning at a high daily intake. The Proposition 65 entry explains the exposure calculation. ## The contaminant table Contaminant limits · food supplements, by market, as of this review | Element | EU | US | UK | Lead | 3.0 mg/kg in the supplement as sold | No federal supplement limit; state rules apply | Retained limit; check current UK law | Cadmium | 1.0 mg/kg | No federal supplement limit | Retained limit | Mercury | 0.10 mg/kg | No federal supplement limit | Retained limit | Arsenic | No EU-wide figure; national rules vary | No federal supplement limit | Check current UK law This table is a starting point and not legal advice. The catalogue specification for this salt is Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg, which looks like the finished-product ceiling but applies to a powder. The dilution factor decides whether that is enough. A capsule in which the salt is a fifth of the fill gives the other ingredients four fifths of the mass to absorb the contribution, so the raw material can carry several times the finished limit. A stick pack that is almost all magnesium citrate has no such room, and its raw-material ceiling sits close to the finished one. Run the sum before the first order: multiply the raw-material result by the salt's share of the serving, compare that with the finished-product limit, and write the ceiling into the purchase specification. It is the difference between a certificate that passes and a product that passes. ## Claims The European Union authorises magnesium claims in Regulation (EU) No 432/2012, and each one carries conditions that travel with it. They speak of a contribution to normal function, never of a disease, a symptom or an outcome. On the US side a structure/function statement belongs to the brand: it has to be truthful, substantiated and followed by the DSHEA disclaimer. Neither market allows a disease-related claim. Nothing on this site makes a health claim for magnesium citrate: the pages publish the specification, the analytical methods and the regulatory framework, and the claim belongs to the brand that prints it and to the market that authorises it. A formulation statement such as “the citrate form is used in capsules and tablets” is a description of the material, not a claim, and it is the kind of sentence that can safely appear on a technical page. ## The document pack - Batch certificate covering magnesium, citrate identity, moisture and the contaminant panel. - Specification and technical data sheet that name the salt and its hydrate. - A 16-section safety data sheet. - Allergen, GMO, origin and solvent-residue statements. - The dietary-ingredient basis for the US market, where the buyer needs it. - A third-party certificate, where the review or the destination calls for one. ## Before the first order - Is the exact salt, including the hydrate, permitted as a magnesium source in the destination market? - At the real dose, do the contaminant results still fit under the finished-product limit? - Does the nutrition declaration match the salt and the hydrate on the certificate? - Is the claim one the market authorises, or a structure/function statement that carries the disclaimer? - Does the pack include the legal basis for the ingredient status in the US and the current UK position? The grade page covers the hydrate decision that drives the label arithmetic, the identity page covers the tests that prove the salt, and the product hub carries the catalogue specification these checks are run against. ### 06 How we prove a magnesium citrate lot is the citrate URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-citrate/identity/ Reviewed: 2026-11-18 Identity is proved in layers, not by a single number. The magnesium comes from an EDTA titration, the citrate from a precipitation reaction and an infrared spectrum, the water from loss on drying or Karl Fischer, and the crystal form from X-ray diffraction. A magnesium figure on its own is consistent with the citrate, the oxide and the carbonate alike, which is why the layers have to agree on the same lot. In one lineA magnesium figure cannot prove the salt; the citrate, the 3:2 ratio and the water have to agree on the same lot. ## Four layers, four methods Start with the metal. A complexometric titration with EDTA at about pH 10 measures magnesium and nothing else. It answers “how much magnesium” and leaves “on what” open, which is exactly the question the next layer has to close. The second layer is the anion. The citrate reaction precipitates calcium citrate from a neutral solution of the salt, and the infrared spectrum is compared with a reference: the carboxylate bands near 1600 and 1400 cm⁻¹ belong to the citrate, and the broad band near 3400 cm⁻¹ belongs to water. A citrate that is present but not associated with the magnesium would still pass the reaction, so the identity result has to be read together with the assay and the ratio. The third layer is the water. Loss on drying at 105 °C separates the anhydrous grade from the nonahydrate at a glance, because the hydrate carries about 26% water and the anhydrous salt carries less than 2%. Karl Fischer is the more direct measurement when the hydrate state is the disputed point. The fourth layer is the crystal. X-ray diffraction shows which crystalline phases are present, and it is the layer that finds a second magnesium source sitting in the same drum. The four layers together are the identity; any one of them alone is a data point. ## The 3:2 ratio Magnesium citrate is Mg₃(C₆H₅O₇)₂: three magnesium ions for every two citrate ions, because magnesium is divalent and citrate is trivalent. The molar mass of the anhydrous salt is about 451 g/mol, of which magnesium is 72.9 g/mol, or 16.2%, and citrate is about 378 g/mol, or 84%. That fixed ratio is the check to run first. If a certificate reports 16% magnesium, the citrate should account for roughly 83% of the mass; a lot reporting 16% magnesium and 70% citrate has about 14% of something else in the drum. If the citrate figure runs high relative to the magnesium, the likely addition is citric acid, which raises the anion without raising the metal. The ratio also explains why a magnesium figure above 16.4% cannot be this salt. Magnesium oxide carries 60.3% magnesium and magnesium carbonate about 28.8%, so a small addition of either lifts the assay quickly. The catalogue range leaves very little headroom: less than 1% magnesium oxide would carry a lot from 16.2% to the top of the range, and about 2% carbonate would do the same. The upper limit is therefore a useful ceiling, not an arbitrary one. ## What the crystal and the spectrum add X-ray diffraction detects crystalline phases. Magnesium oxide has a distinct pattern, and a report that says “no crystalline magnesium oxide detected” is only meaningful when it also states the detection limit and the sample preparation. A diffraction pattern can also separate the anhydrous salt from a hydrate, because the two pack differently in the lattice. Infrared spectroscopy works at the bond level rather than the lattice level. The carboxylate bands of the citrate, their separation and their shape, and the water band give a fingerprint that can be compared with a reference spectrum of a known lot. The FTIR method page and the XRD method page describe what each technique can and cannot see. Neither technique measures purity. A sample can be phase-pure citrate and still carry a heavy-metal load, which is why the contaminant panel sits beside the identity tests rather than instead of them. ## The routes worth testing The first route is magnesium oxide, the smallest addition that lifts the magnesium figure. It is caught by the arithmetic above, by the citrate-to-magnesium ratio and by diffraction. A material that passes the assay and fails the ratio is not the salt. The second route is magnesium carbonate, which lifts the magnesium less aggressively and brings carbonate with it. An acid test that releases carbon dioxide, a loss-on-drying figure that does not match either hydrate, and a diffraction pattern are the checks. The third route is citric acid, added to lift the citrate signal or to dilute an over-strength lot. It lowers the magnesium figure while raising the citrate one, so the ratio moves in the opposite direction, and the powder becomes more acidic than the 5.0–8.0 pH range of the salt. The fourth route is not an adulteration at all but a documentation failure: a nonahydrate sold against an anhydrous line. The magnesium figure will be near 11.9%, the loss on drying near 26%, and the certificate will be internally consistent — with a specification it does not meet. ## How to write the specification - “Magnesium citrate, anhydrous, 14.5–16.4% Mg by complexometric EDTA titration.” - “Citrate identity by reaction and infrared spectrum; reference standard named on the certificate.” - “Loss on drying ≤2.0% at 105 °C; water by Karl Fischer on request.” - “XRD screen for crystalline magnesium oxide, detection limit stated.” - “No added magnesium oxide, magnesium carbonate or citric acid.” The negative statements are as important as the positive ones. A specification that sets a magnesium range and says nothing about added minerals has not excluded them, and a supplier cannot be held to a prohibition that was never written down. ## Five questions for a supplier - Which hydrate is this lot, and what is the loss on drying or the water figure? - What is the citrate figure on the same lot as the magnesium figure, and by which method? - Which reference did the citrate identity conform to? - Is there an XRD report, and what detection limit does it state? - Was any magnesium oxide, magnesium carbonate or citric acid added after the reaction? A supplier who answers all five is describing a material you can specify. One who answers only the magnesium figure is quoting a number. Where each answer sits on the certificate is set out on the COA page; the hydrate decision is on the grade page; the catalogue line these questions test is on the product hub. ### 01 What the COA for vitamin K2 MK-7 actually contains URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k2-mk7/coa/ Reviewed: 2026-11-18 The certificate for a vitamin K2 MK-7 lot reports appearance, identification by HPLC retention time, MK-7 content, the all-trans share of MK-7, loss on drying, the carrier, the heavy-metal panel, microbiology and particle size. Each line needs a method, a release limit and the result measured on that lot. The ranges on this page are the catalog specification; the batch COA is the document that confirms a particular pack. In one lineA total MK-7 assay says how much menaquinone-7 is present; the all-trans figure says which isomer was measured, and the certificate needs both. ## The certificate as a test report A certificate is auditable when every row answers three questions: what was measured, how, and against which limit the lot was released. For a 1% spray-dried powder the sheet has to describe both the menaquinone and the matrix it sits in, because the powder is not pure MK-7. Identity, assay and matrix · vitamin K2 MK-7 1% powder | Parameter | Method | Release limit | Appearance | Visual | Pale yellow to yellow, free-flowing powder | Identification | HPLC retention time | Conforms to the MK-7 reference standard | MK-7 content | HPLC | 0.9–1.1% | all-trans isomer | HPLC, peak-area ratio | ≥92% of MK-7 | Loss on drying | Gravimetric | ≤5.0% | Carrier | Declaration and composition | Starch or gum arabic, named on the certificate | Particle size | Sieve analysis | ≥95% through 40 mesh Contaminant and microbiological limits | Parameter | Method | Release limit | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent ## What the MK-7 figure measures, and on what basis The 0.9–1.1% figure is the concentration of menaquinone-7 in the powder as sold. It is not a purity statement about the molecule. At 1.0%, one gram of powder carries 10 mg of MK-7; the other 990 mg is carrier, residual moisture and the minor components that come with spray drying. The same MK-7 at 98% purity would read 98% only if the carrier were absent. This is why a 1% powder and a pure grade cannot be compared by reading the percentage alone. The powder percentage answers how much powder to weigh; the pure-grade percentage answers how much of the ingredient is MK-7. Both are useful, and they answer different questions. A specification that does not state the basis invites the reader to compare a diluted figure with an undiluted one. The all-trans figure is different again. It is a ratio inside the MK-7 peak, so the carrier does not dilute it. The carrier can change the content figure by a factor of a hundred; it does not change the isomer ratio. The certificate should say whether the ratio was calculated from peak areas at the method's detection wavelength and whether any cis peaks fell below the integration threshold. For an EU-bound lot it should also report cis isomers and other impurities against the entry's limits; the all-trans floor alone is not the entry's full specification. Loss on drying belongs with these figures, not in a footnote. A spray-dried matrix can pick up moisture in handling, and a high LOD concentrates the MK-7 on a dry basis while leaving the as-is figure unchanged. Each result needs its basis stated. ## Release limit versus batch result The release limit is the acceptance boundary. The batch result is what the laboratory measured. Both belong on the sheet, in separate columns, with the method next to them. A result column filled with the specification range is a copy of the gate, not a result, and it hides where the lot sits inside the window. Not every line needs a numeric window. Carrier is a declaration, not an assay: the certificate names the material and, on request, its proportion. Identification is a conformance statement against a reference standard. MK-7 content, the all-trans ratio, loss on drying, the heavy metals and the micro results are the measured lines, and each should carry a unit and a limit. "Passes specification" is a conclusion, and the reader should be able to reach it from the numbers. Ask for the raw chromatogram when the all-trans result is close to 92%; the integration of the cis peaks is where a marginal result is decided. ## What moves between batches MK-7 content moves with the ratio of menaquinone to carrier in the spray-drying feed. The all-trans ratio moves with heat and light exposure during processing and storage: the trans double bonds in the side chain can isomerise, and the cis forms are the usual degradation products. Loss on drying moves with the drying step and with the pack. Particle size moves with milling and sieving; the 40 mesh limit is a flow and dispersion control, not an assay. Heavy metals and microbiology move with the source and the plant hygiene, not with the dilution. A carrier can add its own contaminant load, so the certificate should cover the powder as sold, not only the MK-7 concentrate. A trend across lots says more than one result near an edge: MK-7 drifting low, all-trans falling, or LOD climbing usually points to a process or storage change. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a disputed isomer result, or a form claim the supplier's certificate does not prove. The useful panel is a reversed-phase HPLC run with an MK-7 reference standard that resolves the cis isomers, a separate all-trans calculation from the same chromatogram, ICP-MS for the heavy-metal panel, and the micro suite. Ask the laboratory to report its limit of detection for the cis peaks and to attach the chromatogram. A "conforms" line without a chromatogram does not show whether the method could see the cis forms at all. Identification has the same requirement: the reference standard must be run under the same conditions. Give the referee the retained sample, the supplier's certificate and the specification. Chain of custody matters: the sample tested should be the sample retained, and the lot code on all three should match. ## What to compare between suppliers Put seven lines side by side: form and concentration; MK-7 result and method; all-trans and cis figures; carrier and its declaration; loss on drying; heavy metals and micro; particle size. Two quotations that agree on MK-7 content but differ on the isomer split, the carrier or the LOD are not describing the same powder. The second layer is traceability. The lot code should be identical on the certificate, the pack and the retained sample. The certificate should say who manufactured the lot, whether the MK-7 was synthetic or fermentation-derived, and which carrier was used. A correct certificate can still belong to a pack other than the one on the loading dock. The catalog specification sits on the vitamin K2 MK-7 product page. The forms are compared on the grade page; the isomer evidence is set out on the identity page; the release workflow is on the quality page. The chromatographic method is described in the HPLC method note, and the certificate terms are defined in the COA glossary entry. ### 02 Pure MK-7, 1% powder or oil: choosing a vitamin K2 grade URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k2-mk7/grades/ Reviewed: 2026-11-18 Vitamin K2 MK-7 is sold as an isolated menaquinone-7 concentrate, as a 1% spray-dried powder, or as an oil suspension. The three forms carry the same molecule at very different concentrations, so the grade decides the fill weight, the label declaration and the process. Choose on the dose and the dosage form, not on the largest percentage on the first quotation. In one lineA 1% powder is not a weaker grade; it is a diluted one, and the dilution is what makes a 100 µg dose weighable. ## Why the grade is a weighing decision first A label dose of vitamin K2 is written in micrograms. A capsule fill, a tablet blend or a stick pack is weighed in milligrams. Pure menaquinone-7 at 100 µg is 0.1 mg, a mass that is difficult to weigh accurately on a production line and difficult to distribute evenly through a blend. A 1% powder turns the same 100 µg into 10 mg of powder, which is a normal weighing range and a normal blend component. The grade therefore answers a physical question before it answers a commercial one: how much material has to move to carry the label dose, and can the line handle it uniformly? The concentration on the certificate is the result of that decision, not a ranking of quality. ## Three forms, one molecule Vitamin K2 MK-7 grades and where each fits | Form | MK-7 concentration | Matrix | Typical fit | Isolated MK-7 | 97–102% (EU synthetic spec) | None | Oil-filled capsules, concentrates, small-mass premixes | 1% spray-dried powder | 0.9–1.1% | Starch or gum arabic | Capsules, tablets, stick packs, dry blends | Oil suspension | Agreed and declared | Carrier oil | Softgels, oils, emulsified drinks The isolated grade is the reference point for the comparison; this catalog's standard grade is the 1% spray-dried powder. The EU entry's synthetic specification is 97–102% menaquinone-7, with at least 92% all-trans and no more than 6.0% cis isomers. A 1% powder carries the same molecule on a declared matrix; the all-trans ratio survives the dilution, but the content figure does not. An oil suspension is the same molecule dispersed in a fat, which suits a lipophilic fill and a softgel but adds an oil to the label and to the stability file. ## What the carrier does The carrier is not a neutral space filler. It gives the powder its flow, its dispersion and its dilution factor, and it appears in the ingredient list. Starch and gum arabic behave differently. A starch carrier usually gives a denser, less hygroscopic powder with good flow; a gum arabic matrix is designed to disperse in water and is the usual choice when the powder has to go into a drink mix or a stick pack. Both must be named on the certificate and on the label. The physical specification supports the dosage form: at least 95% through 40 mesh for a powder that has to blend without lumps, loss on drying at or below 5.0% for a matrix that should not cake, and a declared carrier for the label. If the carrier changes, the flow, the dispersion, the fill weight and the label change with it, even when the MK-7 content stays inside 0.9–1.1%. ## Converting a label dose into powder The label dose is the mass of MK-7, not the mass of the powder. The conversion is arithmetic: divide the label dose by the MK-7 concentration of the grade. At exactly 1.0%, 100 µg of MK-7 sits in 10 mg of powder. At the bottom of the release range, 0.9%, the same dose needs 11.1 mg; at the top, 1.1%, it needs 9.1 mg. MK-7 dose converted to pure material and to 1% powder at 1.0% | Label dose (µg MK-7) | Isolated MK-7 (mg) | 1% powder (mg) | 50 | 0.05 | 5 | 100 | 0.10 | 10 | 200 | 0.20 | 20 | 500 | 0.50 | 50 | 1,000 | 1.00 | 100 The table is the stoichiometric minimum, before overage and before the rest of the capsule fill. It also shows where a grade stops fitting. A 1% powder is comfortable for a 100 µg dose and still workable at 500 µg; at a multi-milligram dose the powder mass becomes the capsule, and the isolated or oil grade is the better physical match. ## What the label can say about the grade The label declares the vitamin K amount and the form, not the powder concentration. In the EU, the novel-food designation for this ingredient is "Menaquinone" or "Vitamin K2", and the ingredient list should name the form that is actually present. The carrier is declared in the same list. The vitamin K contribution is expressed against the EU nutrient reference value of 75 µg, so the percentage is calculated from the MK-7 mass, not from the powder mass. In the US, the Supplement Facts panel declares vitamin K in micrograms and names the source in parentheses, for example "Vitamin K (as menaquinone-7)". A 1% powder does not become a 1% label claim; the panel still reports the micrograms of vitamin K that the serving delivers. The concentration belongs on the specification and the certificate, where a formulator can use it. ## What to write into the specification A grade specification should be short enough to audit and complete enough to order. For the standard grade: "Menaquinone-7 1% spray-dried powder; carrier starch or gum arabic, named on the certificate; MK-7 0.9–1.1% by HPLC; all-trans ≥92% of MK-7; loss on drying ≤5.0%; ≥95% through 40 mesh; no other menaquinone added." Add the source route, synthetic or fermentation, if the market file requires it. For an isolated grade, replace the content range with the purity and isomer specification and keep the identification by retention time. For an oil suspension, add the carrier oil, the MK-7 concentration, the antioxidant if one is used, and the pack. The grade name on the purchase order should match the specification; "vitamin K2" alone does not say which of the three forms is being bought. The catalog ranges are on the vitamin K2 MK-7 product page. The certificate lines are explained on the COA page; the light and heat limits are on the stability page; the ordering unit is on the MOQ page. The EU entry is summarised in the EU regulatory note, and the NRV is defined in the NRV glossary entry. ### 02.1 MK-7 vs MK-4: what the menaquinone difference means for the label URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k2-mk7/grades/mk-7-vs-mk-4/ Reviewed: 2026-11-18 MK-7 and MK-4 are both menaquinones, but they are different molecules. MK-4 has the formula C31H40O2 and a molecular weight of about 444.6 g/mol; MK-7 has C46H64O2 and about 649.0 g/mol. The difference reaches the label: the ingredient name, the amount, the regulatory basis and the analytical method all refer to the specific form. A microgram of MK-4 and a microgram of MK-7 are the same mass, but they are not the same substance. In one lineMK-4 and MK-7 are both vitamin K2, but the same microgram figure on a label describes two different molecules. ## Two members of one series The menaquinones share a methylnaphthoquinone ring and differ in the length of the polyisoprene side chain. MK-4 carries a shorter chain; MK-7 carries a longer one. The longer chain makes MK-7 the larger molecule, more lipophilic and less water-soluble, and it changes the retention time on a reversed-phase column. The shared ring is why both are described as vitamin K2; the side chain is why they are not interchangeable. MK-4 and MK-7 side by side | Property | MK-4 | MK-7 | Formula | C31H40O2 | C46H64O2 | Molecular weight | About 444.6 g/mol | About 649.0 g/mol | Side chain | Shorter polyisoprene chain | Longer polyisoprene chain | EU novel-food entry | Not the MK-7 entry; separate basis needed | Vitamin K2 (menaquinone) entry | Common commercial form | Isolated material | Isolated, 1% powder or oil suspension The table is a chemistry comparison, not a ranking. The formula and the molecular weight are fixed; the commercial form is not. A supplier can offer MK-7 as a 1% spray-dried powder on a carrier, while MK-4 is usually supplied as an isolated material that is formulated by the buyer. ## Source and specification The EU entry for vitamin K2 (menaquinone) is written around MK-7. The synthetic specification is 97–102% menaquinone-7, at least 92% all-trans, no more than 6.0% cis isomers and no more than 2.0% other impurities; the microbiological route names a Bacillus source, including Bacillus subtilis ssp. natto, and carries its own specification. That entry is the reference for an MK-7 ingredient, not for MK-4. MK-4 is generally supplied as a synthetic ingredient. Its specification has to be written for MK-4: identity, assay, related substances and the form. The source and the specification have to match, because a certificate for MK-7 cannot support an MK-4 label, and a certificate that says only "vitamin K2" does not say which homologue was measured. ## Dose, mass and the label arithmetic Both forms are declared on the label as vitamin K in micrograms. The number is a mass of the declared menaquinone, not a form-neutral "K2" unit. There is no official conversion factor that turns a microgram of MK-4 into a microgram of MK-7. The two figures describe the same mass of two different molecules, with different molecular weights and different molar amounts. This matters when a formula is transferred. A label that declares 100 µg of MK-7 cannot be matched by 100 µg of MK-4 and called equivalent, because the ingredient named on the label has changed. If the label is mass-based, the mass has to be the mass of the named form. The vitamin K nutrient reference value is used to calculate the percentage contribution, but it does not make the two forms interchangeable. What a label declaration refers to | Label line | What it names | What it does not say | Vitamin K (as menaquinone-7) 100 µg | 100 µg of MK-7 | Anything about MK-4 | Vitamin K (as menaquinone-4) 100 µg | 100 µg of MK-4 | Anything about MK-7 | Vitamin K2 100 µg | A form that still has to be named | Which menaquinone is present ## The regulatory file is form-specific In the EU, the Union list entry in Regulation (EU) 2017/2470 is the reference for the MK-7 ingredient, and the labelling designation it sets is "Menaquinone" or "Vitamin K2". The entry does not make MK-4 a synonym. An MK-4 ingredient needs its own basis in the vitamin and food-supplement rules, and the current Annex II and novel-food position for that specific material should be checked before the label is written. In the US, both forms can be sold as dietary ingredients, but the basis is ingredient-specific: the supplier should state whether the material was marketed before 15 October 1994 or is supported by a new dietary ingredient notification. In the UK, the retained novel-food list and the food-supplement rules have to be checked for the form being sold. A market file for MK-7 is not a market file for MK-4. ## What the label must say The ingredient list has to name the form that is actually in the product. "Vitamin K2" alone is not enough when the source is declared elsewhere, and "MK-7" is not a synonym for every menaquinone. In the EU, the permitted designation for the MK-7 novel food is "Menaquinone" or "Vitamin K2"; the brand still has to make the ingredient list consistent with the form. In the US, the Supplement Facts panel names the source in parentheses, for example "Vitamin K (as menaquinone-7)" or "Vitamin K (as menaquinone-4)". The carrier and the concentration belong on the specification and the certificate, not in the ingredient name. A 1% MK-7 powder is declared by the vitamin K it delivers, not by the powder weight. A label that says "MK-7" while the certificate reports MK-4 is a labelling defect before it is a quality defect. ## When to choose which Choose on the dosage form, the label, the market file and the analytical method, not on the generic phrase "vitamin K2". MK-7 is the form this catalog supplies as a 1% spray-dried powder, with an oil suspension on request; it fits a label that names menaquinone-7 and a market file built on the MK-7 entry. MK-4 is a separate ingredient with its own specification, its own certificate and its own label wording; it is the right choice only when the label and the market file already specify MK-4. A substitution in either direction changes the label, the specification and the regulatory file. If a brand wants to switch forms, the change should be handled as a new product, not as a supplier swap. The product page gives the MK-7 specification; the grade page compares the MK-7 forms; the compliance page sets out the market checks; the identity page shows how the form is proved. The EU entry is summarised in the EU regulatory note. ### 03 MK-7 is sensitive to light and heat; the carrier decides the rest URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k2-mk7/stability/ Reviewed: 2026-11-18 MK-7 is a menaquinone with a long polyisoprene side chain. Light and heat act on the double bonds in that chain, and oxygen attacks the naphthoquinone ring: the trans bonds can isomerise to cis forms, and the ring can oxidise. In a sealed 1% spray-dried powder the carrier limits mobility and oxygen access; in an oil, a beverage or a gummy the matrix can accelerate them. Shelf life belongs to the pack, the carrier and the process, not to the molecule alone. In one lineLight and heat isomerise MK-7; the carrier and the pack decide how much of that reaches the molecule. ## The powder in the sealed pack A spray-dried 1% powder is a dispersion of MK-7 in a starch or gum arabic matrix. The matrix lowers the mobility of the molecule and limits the oxygen that reaches it, which is why the dry powder is the most forgiving grade to store. The limits that matter are the ones already on the certificate: loss on drying at or below 5.0%, a declared carrier, and a pack that keeps light and moisture out. The 1 kg foil pouch and the 25 kg fiber drum with a food-grade liner are the two standard packs. Both are opaque when closed, and both depend on the liner being intact. A drum left open in a warm room, or a pouch folded instead of sealed, exposes the powder to moisture and light and gives the matrix a chance to cake. The powder should be stored cool, dry and dark, and the pack should be closed between uses. ## Oil, emulsion and the gummy matrix An oil suspension removes the water but adds a new set of reactions. The carrier oil can oxidise, and its peroxides can attack MK-7; light passes through many oils and through clear softgel shells. A softgel therefore needs an opaque shell, a controlled headspace and an oil with its own oxidative stability. The MK-7 concentration and the oil should both be on the specification, because the oil is part of the stability system. In a beverage, MK-7 has to be dispersed in water even though the molecule is fat-soluble. That means an emulsion or a fine dispersion, and the emulsion is usually the weaker part of the system: light in a clear bottle, dissolved oxygen, heat during pasteurisation and droplet coalescence can all shorten the shelf life before the MK-7 itself changes. In a gummy, the heat of cooking, the water activity and the cooling profile are the main variables; adding MK-7 late in the process reduces its heat exposure but does not remove the need for a stability run in the finished matrix. ## What drives the loss Degradation routes for MK-7 and the controls that address them | Factor | What it does | Control | Light | Promotes trans-to-cis isomerisation and colour fade | Opaque or amber pack, light-protective secondary carton | Heat | Raises cis formation and oxidation during drying, blending or cooking | Lower process temperature, shorter residence time, cooling before packing | Oxygen | Oxidises the quinone ring and consumes the carrier system | Sealed pack, controlled headspace, antioxidant where declared | Moisture | Plasticises the matrix, causes caking and speeds the other routes | Loss on drying ≤5.0%, sealed pack, dry storage | Trace metals | Catalyse oxidation at low concentration | Source control, heavy-metal panel on the certificate The table is not a ranking. In a sealed powder, light and heat usually dominate because moisture and oxygen are already controlled. In an oil or an emulsion, oxygen and light move to the front. The same molecule can fail by a different route in each dosage form, which is why a raw-material stability result cannot be transferred to a finished product. ## A stability protocol that can be audited A useful protocol names the pack, the storage condition, the time points, the analytical method and the acceptance limits before the first sample goes into the chamber. A common design pairs a long-term condition, such as 25 °C and 60% relative humidity, with an accelerated condition, such as 40 °C and 75% relative humidity, and adds a light-exposure arm and an open-pack arm. The light arm is not optional for a product sold in a clear bottle or a clear capsule. At each point the laboratory should report MK-7 content, the all-trans and cis figures, loss on drying, appearance and, for an oil or emulsion, the relevant physical tests. The all-trans figure is the early warning: it can fall before the total MK-7 content leaves its range, because isomerisation changes the shape of the molecule without removing it. A protocol that measures only total MK-7 can miss the first change. The finished product should be tested in its own pack. A powder in a foil pouch and the same powder in a stick pack, a capsule or a gummy are different stability subjects, even when the MK-7 input is identical. ## Formulation and process choices The carrier is the first formulation decision. A starch matrix is less hygroscopic and gives a denser powder; a gum arabic matrix disperses more readily in water. Neither is a light barrier, so the pack still has to do that job. An antioxidant can be part of the carrier system, but it has to be declared and it does not replace an opaque pack; a light-exposed sample with an antioxidant will still isomerise. Process exposure is cumulative. Spray-drying, blending, tableting and gummy cooking each add heat, and the total is what the molecule sees. Opaque capsule shells, an opaque film coating on a tablet and a secondary carton are simple barriers that are easy to specify and easy to audit. Clear capsules and clear bottles are the opposite: they look clean on the shelf and give light free access to the molecule. ## Assigning a shelf life Shelf life is assigned per pack, per formulation and per market, and it is supported by the stability data for that combination. The raw material's retest date does not establish the finished product's shelf life, and a batch COA does not establish either. The storage statement on the label should match a condition that was actually tested; a label that says cool and dry needs data at that condition, not only an accelerated run at 40 °C. Once a 1 kg pouch is opened, the remaining powder sees a different environment. Split the pack into smaller units for a long production campaign, reseal it properly, and keep it away from light. The retained sample should come from the same lot and be stored under the same condition as the batch it represents. The catalog specification is on the vitamin K2 MK-7 product page. The grade choice is on the grade page; the certificate lines are on the COA page; the packaging and ordering unit are on the MOQ page. The analytical method is described in the HPLC method note, and the release workflow is on the quality page. ### 04 Vitamin K2 MK-7: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k2-mk7/moq/ Reviewed: 2026-11-18 The minimum order for vitamin K2 MK-7 is 1 kg, packed in a foil pouch; the production pack is a 25 kg fiber drum. The standard 1% spray-dried grade ships in 1–7 days from a released lot, and the clock starts when the specification and the order agree. A quotation needs six details from the buyer: grade, quantity and pack, destination and Incoterms, documents, label market and any special test. In one lineOne kilogram is the smallest unit that can carry a lot code, a certificate and a retained sample; it is drawn from a released batch, not blended for the order. ## Why the minimum is 1 kg One kilogram of a 1% powder carries about 10 g of MK-7. At a 100 µg label dose that is roughly 100,000 doses before overage, which is enough for a pilot batch, a stability run and a first production campaign. More importantly, 1 kg is a unit we can release with a lot code, a certificate and a retained sample that all match. Below that, the material is usually repacked from a larger lot, and the link between the certificate and the pack in the buyer's hand becomes harder to prove. The minimum is therefore a traceability unit, not a sales threshold. A buyer who needs 200 g for a trial is better served by a 1 kg qualification pack with a documented lot than by a split that has no certificate of its own. The same logic applies to a repeat order: the 1 kg pack is the unit that can be compared with the previous lot on paper and in the laboratory. ## The two standard packs Standard packs for vitamin K2 MK-7 1% powder | Pack | Net content | Typical use | Handling | Foil pouch | 1 kg | Sample, qualification, pilot batch | Reseal between uses; keep cool, dry and dark | Fiber drum with liner | 25 kg | Production batch | Keep the liner closed; store away from light and moisture An oil suspension or a granulated grade is available on request, and the pack is agreed with the order because the oil and the granule have different handling needs. The pack label should carry the product name, the grade, the lot code, the net content and the storage statement. The lot code is the link between the pack, the certificate and the retained sample; a label without it turns the certificate into a general document. The 1 kg pouch is not a dispensing pack for a long campaign. Once it is opened, the powder sees moisture and light, and the remaining material should be resealed and used within the period the stability data supports. The 25 kg drum is a production pack, not a storage silo; it should be closed after each withdrawal. ## Lead time and what moves it The standard grade is quoted at 1–7 days from a released lot. That window covers release, packing and dispatch, not the transit time to the destination. The clock starts when the order, the specification and the documents agree; a purchase order that names "vitamin K2" without the grade or the pack is not a starting signal. Several things move the date: a non-standard carrier, an oil suspension, a granulated grade, a custom pack, a market-specific document set, or a test that is not on the standard certificate. Destination requirements can also add time before dispatch, because the file has to be complete before the pallet leaves. If the date is critical, say so on the enquiry and state the date by which the material has to be at the destination, not only the date by which it has to be ordered. ## The six details a quotation needs What to include in an enquiry for a usable quotation | Detail | Why it changes the offer | Product and grade | 1% powder, isolated MK-7 and oil suspension are different materials | Quantity and pack | 1 kg pouch and 25 kg drum are different units and handling | Destination and Incoterms | Freight, documents and responsibility change with the route | Documents required | COA, TDS, SDS, allergen, GMO and origin statements are separate items | Label market and artwork | EU, US and UK labels use different names and units | Special tests or limits | An extra test or a tighter limit is a different release protocol An enquiry with these six details can be answered with a specific offer. An enquiry that says only "K2 MK-7" will produce a range, because the supplier has to guess which grade, which pack and which market file the buyer means. ## Samples and qualification A sample should be drawn from a released lot and should arrive with that lot's certificate. The lot code on the sample, the certificate and the retained sample should be the same; if they are not, the sample cannot qualify the production material. Ask for the sample to be packed in the same material as the commercial pack, because a sample in a clear bag tells you nothing about the light protection of a foil pouch. Qualification usually needs more than one test tube of powder. A 1 kg pack allows the buyer to run the identity test, a trial batch and a short stability check from the same lot. Record the sample lot code in the trial record; when the production order arrives, compare its lot code and certificate with the sample, not only its appearance. ## Terms that belong in the order The purchase order should reference the specification, the grade, the pack, the lot's certificate and the agreed shelf life remaining on arrival. State the documents that must accompany the shipment, the non-conformance window and the address for the retained sample. For a repeat order, a quality agreement can fix the specification, the change-notification rule and the annual review, so that each order does not reopen the same questions. Payment terms and Incoterms are commercial, but they affect the file: an FOB order and a delivered order have different responsibilities for transport conditions. If the material is temperature- or light-sensitive in transit, the shipping instruction belongs in the order, not in a later email. The MOQ is stated on the vitamin K2 MK-7 product page. The grade is compared on the grade page; the certificate lines are on the COA page; the market file is on the compliance page. The shipping and packing options are described on the logistics page, the release workflow is on the quality page, and the minimum-order term is defined in the MOQ glossary entry. ### 05 Where vitamin K2 MK-7 is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k2-mk7/compliance/ Reviewed: 2026-11-18 Permission for vitamin K2 MK-7 depends on the market, the source and the form, not on the name alone. In the EU the ingredient sits on the novel-food Union list, with a specification written around menaquinone-7; in the US it is sold as a dietary ingredient; in the UK the retained novel-food list has to be checked separately. The file has to connect the form, the specification, the label and the claim for the market where the product is sold. In one linePermission attaches to the form and the source, not to the words vitamin K2 on the label. ## Four checks, not one A compliance file is often treated as a single certificate. It is at least four checks. First, is the form and source permitted in the market? Second, does the lot meet the specification that the permission refers to? Third, does the label use the permitted name, units and declarations? Fourth, is the claim on the pack one that the market allows for this ingredient? A file that answers only the second question is a laboratory file, not a market file. The four checks can fail independently: a compliant lot can carry a non-compliant label, and a permitted claim can be attached to the wrong form. The sections below take each check in turn. ## The EU novel-food entry Regulation (EU) 2017/2470 establishes the Union list of novel foods. The entry for vitamin K2 (menaquinone) covers a product made by a synthetic or a microbiological process. The specification for the synthetic route describes 97–102% menaquinone-7, including at least 92% all-trans, with no more than 6.0% cis isomers and no more than 2.0% other impurities. The microbiological route names a Bacillus source, including Bacillus subtilis ssp. natto, and carries its own specification. The entry also sets the labelling designation: "Menaquinone" or "Vitamin K2". Use in food supplements is directed to the food-supplement framework, including Directive 2002/46/EC, Regulation (EU) No 609/2013 and Regulation (EC) No 1925/2006, and the conditions in the entry apply. Read the current consolidated text before relying on a summary, because the annex is amended and the source route matters. A 1% spray-dried powder is a formulation of the authorised MK-7 on a starch or gum arabic matrix, not a different menaquinone. The MK-7 in the powder has to meet the entry's specification, and the carrier has to be a permitted food ingredient, declared on the label. The dilution does not lower the specification the MK-7 has to meet. ## The US dietary-ingredient route In the United States, MK-7 is sold as a dietary ingredient under DSHEA. The supplier should be able to say whether the ingredient was marketed as a dietary ingredient before 15 October 1994 or is supported by a new dietary ingredient notification. A GRAS notice for a conventional food use is a different route from a dietary-supplement ingredient; it does not substitute for the dietary-ingredient basis. The finished product is made under the dietary-supplement cGMPs in 21 CFR 111, and the Supplement Facts panel follows 21 CFR 101.36. Vitamin K is declared in micrograms, with the source named in parentheses. A structure/function statement needs the DSHEA disclaimer and must not be a disease claim. The file should include the ingredient basis, the specification and the certificate, not only a "food grade" statement. ## The UK retained list Great Britain maintains its own retained version of the novel-food list, held by the Food Standards Agency. It started from the EU list but can diverge as each side amends its text. Check the current GB list for the MK-7 entry, the source route and the specification before shipping. Northern Ireland applies EU rules under the Windsor Framework, so a GB-only check is not enough for a product placed in Belfast or sold cross-border. The UK label also has its own requirements for the food-supplement declaration and the vitamin K contribution. The practical rule is the same as in the EU: the form and the source have to match the list entry, and the label has to use the permitted designation. ## The limits in the file Catalog release limits that support the compliance file | Parameter | Catalog limit | What the file should show | Heavy metals | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | ICP-MS results against the market's contaminant ceilings | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Method and result for each test | Loss on drying | ≤5.0% | Result and basis | Particle size | ≥95% through 40 mesh | Sieve method and result These are catalog release limits, not a statement that every market applies the same legal maximum. Contaminant ceilings are set by the destination market and can be tighter for a particular food category. The certificate should show the measured result; the file should map it to the ceiling for the product being sold. ## Where the claim boundary sits In the EU, nutrition and health claims are governed by Regulation (EC) No 1924/2006 and the EU Register of nutrition and health claims. A claim may be used only if it is on the Register, matches the conditions of use and is not a disease claim. Vitamin K has authorised claims, but this page does not reproduce or rely on any of them; the brand's own regulatory review decides whether a claim is available for its product and dose. The ingredient name is not a claim: "MK-7" and "all-trans" are specification terms, not permitted health claims. In the US, a structure/function statement needs the DSHEA disclaimer and must not make a disease claim. The UK has its own register and enforcement; a claim authorised in the EU is not automatically available in Great Britain. ## The document set Documents a brand should hold for a MK-7 lot | Document | What it should establish | Certificate of analysis | Lot code, MK-7 content, all-trans ratio, carrier, contaminants, micro | Technical data sheet | Grade, carrier, solubility, particle size, pack and storage | Safety data sheet | Handling, transport and storage classification | Specification | The release limits the certificate is judged against | Allergen and GMO statements | Carrier source and any declaration the market requires | Source statement | Synthetic or microbiological route, and the manufacturing site | Novel-food statement | How the ingredient maps to the EU or GB list entry ## A short checklist - Does the certificate name the lot, the grade and the carrier? - Does the MK-7 result meet the specification on the stated basis? - Is the all-trans figure reported separately from the total MK-7? - Does the label use the market's permitted designation and units? - Is the carrier declared in the ingredient list? - Is every claim on the pack permitted for this form and this market? - Does the source statement match the list entry the file relies on? - Do the COA, pack label and retained sample share one lot code? The product specification is on the vitamin K2 MK-7 product page. The certificate is explained on the COA page; the grade and carrier on the grade page; the identity evidence on the identity page. Market notes are kept in the EU, US and UK regulatory pages, and the release workflow is on the quality page. ### 06 How we prove a vitamin K2 MK-7 lot is the all-trans isomer URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k2-mk7/identity/ Reviewed: 2026-11-18 A vitamin K2 MK-7 lot (CAS 2124-57-4, C46H64O2) is identified in four layers: the certificate and the lot chain, the chromatographic identity, the isomer ratio and homologue profile, and the carrier with its mass balance. A total MK-7 assay on its own cannot separate all-trans MK-7 from a cis-rich material, a different menaquinone or a powder that has been diluted further than the label says. The all-trans figure is the identity check that belongs specifically to this grade. In one lineA total MK-7 assay can pass while the isomer ratio fails; identity needs the chromatogram, the all-trans figure and the carrier. ## The four layers of identity What each identity layer proves, and what it does not | Layer | Evidence | What it proves | What it does not prove | Documentary | COA, lot code, source statement, specification | The lot in the pack is the lot in the file | That the chemistry matches the file | Chromatographic | Retention time, UV spectrum, standard addition | The peak is menaquinone-7 | The isomer ratio, unless the method resolves it | Isomeric | all-trans and cis peak areas, homologue profile | The configuration and the menaquinone distribution | The carrier or the dilution | Matrix | Carrier declaration, mass balance, LOD | The powder is the grade that was ordered | The identity of the MK-7 on its own A certificate can be genuine and still describe a different lot; a chromatogram can show one peak and still hide cis isomers if the method does not resolve them; a correct MK-7 peak can sit in a powder whose carrier is not the one declared. Identity is the four layers agreeing, not one layer being present. ## What the HPLC has to show MK-7 is normally determined by reversed-phase HPLC with UV detection and an external reference standard. The retention time establishes the peak; a diode-array spectrum and a standard addition make the assignment stronger. The method has to resolve the all-trans peak from the cis isomers, because the isomer ratio is calculated from the peak areas, not from the total. Ask for the chromatogram, the column, the mobile phase, the detection wavelength and the integration parameters. The chromatogram should show the all-trans peak, the cis region and the reference standard run under the same conditions. LC-MS is useful when the peak assignment is disputed: the molecular ion separates MK-7 from MK-4, MK-6, MK-8 and MK-9. ## The all-trans ratio and the other menaquinones The catalog specification requires at least 92% of the MK-7 to be the all-trans isomer. The remainder is mainly cis isomers, and the ratio is a record of how the material was processed and stored: heat and light convert trans double bonds to cis, so a low all-trans figure points to an exposure that a total assay cannot see. The EU entry's synthetic specification caps cis isomers at 6.0%; a 1% powder sold into the EU still has to show that its MK-7 meets the entry route that applies to it, not only the powder's all-trans floor. Other menaquinones also occur. The EU entry describes a material that is primarily MK-7 with a smaller amount of MK-6, so MK-6 is not automatically an adulterant; it is a component whose limit should be stated. MK-4, MK-8 and MK-9 are different questions. A specification that says only "MK-7 ≥1%" leaves the homologue profile and the cis content open. ## The carrier is part of the identity In a 1% spray-dried powder, about 99% of the mass is not MK-7. The carrier is starch or gum arabic, and it must be named on the certificate. The mass balance should close: MK-7 content, loss on drying, carrier and minor components add up to 100%. A certificate that quotes 98% for a 1% powder is confusing the powder with the isolated ingredient. The carrier can also interfere with identity tests. Microscopy sees starch granules or gum particles, not the molecule; FTIR sees the matrix as well as the menaquinone. The method has to account for the matrix, and the specification must state the carrier so a change of carrier is a change of product; without that declaration the mass balance cannot be audited. ## What XRD can and cannot see in a 1% powder X-ray diffraction reads crystalline phases, and in a 1% spray-dried powder any crystalline phase belongs to the carrier, not the menaquinone. Starch returns its own sharp reflections, while gum arabic and the spray-dried matrix are largely amorphous. MK-7 dispersed at 1% sits far below the few-percent detection limit that a phase scan can reach in this matrix, so an XRD pattern cannot confirm the molecule, cannot measure the content and cannot separate all-trans from cis. For the isolated crystalline MK-7 a diffraction pattern is a legitimate solid-form check, but it is not the identity test a buyer needs. The identity evidence is the HPLC retention time and ultraviolet spectrum, the all-trans and cis peak areas, the homologue profile by LC-MS and the carrier mass balance. An XRD report on a finished powder is not a substitute for any of them. ## The routes that pass a total assay Adulteration routes for MK-7 and the test that catches each | Route | What still passes | What catches it | MK-4 substituted or added | A broad "vitamin K2" assay | Retention time, UV spectrum, LC-MS | Other menaquinones | Total menaquinone figure | Homologue profile, mass detection | Lower MK-7 content | Appearance and a nominal grade name | Content assay, mass balance, carrier ratio | Cis-rich material | Total MK-7 content | all-trans and cis peak areas | Undeclared carrier or spiking | MK-7 content inside 0.9–1.1% | Carrier declaration, mass balance, microscopy Each route is designed to satisfy the headline number, so the defence is to specify the headline number and the supporting evidence together: content, isomer ratio, homologue profile, carrier and lot traceability. ## How to write the identity specification Write the full name and the source: "Menaquinone-7 (all-E), 1% spray-dried powder, synthetic or Bacillus fermentation, source declared." Then the analytical lines: "Identification by HPLC retention time and UV spectrum against a reference standard; MK-7 0.9–1.1%; all-trans ≥92% of MK-7; cis isomers reported; other menaquinones reported against an agreed limit; carrier starch or gum arabic, named; loss on drying ≤5.0%; ≥95% through 40 mesh." Add the negative statement that matters: "No menadione added; no MK-4 added; no undeclared carrier." A negative statement is only useful if the method can detect the substance, so pair it with the test that would catch it, and state whether the content results are on an as-is or dried basis. ## Five questions for the supplier - Which MK-7 result and which all-trans result belong to this lot, and what method, column and wavelength produced them? - Can you send the chromatogram that shows the cis peaks and the integration? - Is the MK-7 synthetic or fermentation-derived, and does the certificate state the source? - What is the carrier, at what proportion, and is it the only diluent? - Which other menaquinones were screened, at what limit, and was menadione included? Five direct answers amount to an identity file. The product page carries the catalog specification; the COA page explains each figure; the grade page explains the concentration; the compliance page covers the source and the label. The HPLC method note explains the separation, and the assay glossary entry defines the basis. ### 01 What the COA for creatine monohydrate actually contains URL: https://nutrition.rainwoodbio.com/products/specialty/creatine-monohydrate/coa/ Reviewed: 2026-11-18 A creatine monohydrate COA should let a reader audit the lot: appearance, IR identity, HPLC assay, creatinine, dicyandiamide, loss on drying, residue on ignition, mesh, heavy metals and microbiology. Each line needs the method and the release limit that applied, not a bare pass. The ranges below are the catalog specification; the batch COA is the record for the drum in front of you. In one lineThe certificate has to show the assay basis, the creatinine and dicyandiamide figures and the water of crystallisation, not only a purity number. ## Reading the certificate line by line Auditing a COA means reading every line for three things: the parameter, the method that produced the value, and the limit the lot had to meet. A sheet with only a parameter and a result is a summary; it cannot be checked. Identity, assay and physical tests · creatine monohydrate | Parameter | Method | Release limit | Appearance | Visual | White crystalline powder | Identification | IR compared with a reference spectrum | Conforms | Assay | HPLC, calculated on the dried basis | 99.0–101.0% | Creatinine | HPLC or another specific method named on the certificate | ≤100 ppm | Dicyandiamide | HPLC or another specific method named on the certificate | ≤50 ppm | Loss on drying | Gravimetric | ≤12.0% | Residue on ignition | Gravimetric, ashing | ≤0.1% | Mesh | Sieve analysis | 80 or 200 mesh, as ordered Contaminant and microbiological limits | Parameter | Method | Release limit | Lead | ICP-MS or ICP-OES | ≤3 mg/kg | Arsenic | ICP-MS or ICP-OES | ≤2 mg/kg | Cadmium | ICP-MS or ICP-OES | ≤1 mg/kg | Mercury | ICP-MS or ICP-OES | ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent ## What the HPLC assay is measured against The 99.0–101.0% figure is an assay on the dried basis, not a percentage of the powder as sold. The monohydrate carries roughly one molecule of water per creatine molecule, about 12% of its mass, so an as-is figure of 99% would leave no room for the water that defines the hydrate. The certificate should state the basis, and the calculation should use that lot's loss-on-drying result, not a fixed factor. The method also needs enough detail to be repeatable: column, mobile phase, detection mode, standard and the integration rule. Creatine has a weak chromophore, so a low-wavelength UV method has to be validated for interference from creatinine and from the sample matrix. Peak purity or a diode-array check belongs on the method summary, because a single retention time can match more than one compound. Creatinine and dicyandiamide are separate lines, not figures inferred from the assay. Creatinine is the cyclised degradation product that forms when creatine meets moisture and heat; dicyandiamide is a nitrogen-rich process impurity associated with the cyanamide route. Both can sit inside a passing assay, which is why the specification caps them independently. ## The limit column and the lot result The limit is the gate; the result is the measurement. They should sit in separate columns with the method alongside, so the reader can decide whether the lot passed rather than taking the word “pass” on trust. A result column that repeats the specification range is not a result at all. Creatinine and dicyandiamide show why the distinction matters. A lot at 20 ppm creatinine and a lot at 90 ppm both pass a 100 ppm limit, but they are not equivalent starting points for a formula that will see heat or water. The same is true of residue on ignition: 0.02% and 0.09% both pass 0.1%, while the second leaves much less room for an inorganic contaminant. Loss on drying is the line most often misread. The limit is high by design because the water of crystallisation is part of the material. A result far below 12.0% is not a cleaner lot; it may be an over-dried or partly anhydrous powder, and the hydrate identity should be checked before the result is accepted. Mesh is a grade descriptor rather than a purity limit, and the certificate should name the sieve cut and the test method rather than only “80 mesh” or “200 mesh”. ## Where lots differ Synthesis and crystallisation set the impurity baseline. The cyanamide route can leave dicyandiamide, while a route that starts from sarcosine has a different impurity map. Crystallisation and drying control the water of crystallisation, and drying is also where creatinine can climb if the temperature is pushed to reach a low moisture figure. Milling and sieving then set the mesh and the flow, without changing the chemistry. Assay usually moves in a narrow band, which is why a single figure near the edge says less than a trend across lots. Creatinine drifting upward across three lots points to the drying step; dicyandiamide drifting upward points to the synthesis or the wash; residue on ignition drifting upward points to desalting. Colour and flow are less quantitative but can reveal a hot dry or a fines-heavy mill cut before the numbers do. ## When to bring in a referee laboratory Order an independent test for a new source, a first shipment into a regulated market, a disputed result, or any identity claim the supplier's certificate does not prove. The useful panel is not a full repeat of every line: IR for identity, HPLC for assay and peak purity, creatinine and dicyandiamide by a specific method, loss on drying, and ICP-MS or ICP-OES for the heavy-metal panel, all on one submitted sample. Every screen should carry its detection limit. “Not detected” without a limit describes the method's sensitivity, not the sample. The assay report should also name the column, detector and calculation basis, because a percentage without those details cannot be reproduced. A contested result is the other reason to go outside. Send the referee the retained sample, the supplier's COA and the agreed specification, and ask for the tests that distinguish the monohydrate from a dried or blended powder. Keep the chain of custody intact: the material tested must be the material you retained. ## A side-by-side supplier check Put six lines side by side: hydrate and loss on drying; assay and basis; creatinine; dicyandiamide; residue on ignition; mesh and flow. Two quotations that match on assay but diverge on the other five are not describing the same powder. Add the heavy-metal method and the microbiological panel, because “conforms” without a method is not comparable. Traceability is the other half. The lot code must match across the COA, the drum and the retained sample, and the certificate should identify the manufacturer, grade and pack. A genuine certificate for the wrong drum is still the wrong document. The catalog specification sits on the creatine monohydrate product page. The mesh and flow question is set out on the grade page; the full identity sequence is on the identity page; the release workflow is on the quality page. The assay method is described in the HPLC method note, and the moisture calculation is defined in the loss-on-drying glossary entry. ### 02 80 mesh, 200 mesh or micronized: choosing a creatine grade URL: https://nutrition.rainwoodbio.com/products/specialty/creatine-monohydrate/grades/ Reviewed: 2026-11-18 The grade is a particle-size decision, not a purity decision. An 80 mesh cut is the general-purpose powder for dry blends and capsules; a 200 mesh cut is finer, for stick packs and faster dispersion; a micronized grade is a distribution agreed by laser diffraction, used where mouthfeel and suspension matter. All three are creatine monohydrate and carry the same assay, creatinine, dicyandiamide and loss-on-drying limits. In one lineMesh changes the powder's behaviour in the line, not the molecule in the drum. ## Why the grade is a processing question Creatine monohydrate has one identity: the hydrate of creatine, CAS 6020-87-7. Milling does not change the assay, the impurity limits or the water of crystallisation. What changes is how the powder moves, how much air it carries, how fast it wets and how much mass fits into a capsule, a scoop or a stick. “80 mesh” and “200 mesh” are sieve cuts and can be written as a pass-through requirement. “Micronized” has no single definition in the trade: one supplier may mean a 200 mesh cut, another a jet-milled powder with a median well below it. A micronized grade should be specified as a distribution, such as a D50 and a D90 by laser diffraction, with the method named. ## Three cuts, three behaviours Particle size, behaviour and typical fit · creatine monohydrate | Grade | Particle size | Flow and dust | Dispersion | Typical fit | 80 mesh | Passes an 80 mesh sieve, about 177 µm | Free-flowing; low dust | Wets with stirring; can feel gritty in a fine suspension | Capsules, tablets, dry blends, drum handling | 200 mesh | Passes a 200 mesh sieve, about 74 µm | Slower flow; more dust and static | Faster wetting; smoother mouthfeel | Stick packs, drink mixes, tight capsule fills | Micronized | Distribution agreed by laser diffraction; finer than 200 mesh | Cohesive; bridges and dusts | Fastest dispersion; least grit | Fine-dispersion mixes, suspensions, small fills The sieve figures are nominal: 80 mesh is about 177 µm and 200 mesh about 74 µm. A certificate that names only the mesh leaves the method and the fines content open, so ask for the sieve standard and the percentage passing. ## Flow, bulk density and loss on drying Flow is the first thing the line notices. A coarser cut has less surface area per gram, absorbs less moisture from the air and pours more predictably. A finer cut has more particle-to-particle contact, holds more air and tends to bridge in a hopper, cling to a chute or puff out of an open port. Micronized powder is the most cohesive of the three and usually needs either a forced feeder or a granulation step before it will run at speed. Bulk density follows the same pattern. The finer the powder, the more air is trapped between particles and the lower the bulk density, so a fixed fill volume holds less mass. That is why a grade change can move a capsule fill weight or a stick-pack fill target without any change in the chemical specification. Measure bulk and tapped density on the actual grade, and test the flow in the actual hopper rather than on a bench. Loss on drying is not a grade property. Every grade is the monohydrate and is released against the same ≤12.0% limit, because the water of crystallisation is part of the material. A finer cut does not justify a lower LOD, and a low LOD is not evidence of a better grade; it may mean the powder has been over-dried or that a different hydrate was supplied. Keep the LOD limit and the particle-size method as separate lines. ## What changes in the capsule, stick or tablet In a capsule, fill weight is set by volume and powder density before it is set by the label. A finer grade at the same fill volume delivers less mass, and a poorly flowing grade gives weight variation across the run. An 80 mesh cut is usually the easier starting point; a 200 mesh cut may be needed when the capsule is small or the blend must be uniform, with the feeder adjusted for the lower density. In a tablet, the grade affects segregation, flow and content uniformity. A coarser cut blends and flows well but can segregate from fine excipients; a finer cut distributes more evenly but may bridge in the feed frame. A grade change should be tried on the press, not only in a sieve analysis. In a stick pack or a drink mix, the 200 mesh cut is the usual choice: it wets faster, feels less gritty and stays suspended longer than the coarse cut. The trade-off is dust at the filling head and powder on the seal, which is a machine and hygiene issue as much as a product issue. A micronized grade goes further in the same direction, but it can float on water or form lumps if it is dumped in too quickly; a short high-shear step or a pre-blend with a carrier usually fixes that. None of this alters the amount of creatine in a gram of powder: the label declares the monohydrate mass, and the grade only changes how that mass behaves. If the product needs a clear solution, no mesh will deliver it; creatine monohydrate has limited solubility, roughly 13 g/L at room temperature, and a finer powder dissolves faster only up to that limit. ## The specification for a grade switch A grade specification needs four things beyond the chemical lines: the grade name, the particle-size method, the acceptance range and the bulk-density or flow target if the line depends on it. For a sieve cut, write the mesh and the percentage passing. For a micronized grade, write D50 and D90 by laser diffraction and name the dispersion method, because the same powder can report different distributions under different preparation. - “Creatine monohydrate, 80 mesh; ≥95% through an 80 mesh sieve; sieve standard named.” - “Creatine monohydrate, 200 mesh; ≥95% through a 200 mesh sieve; sieve standard named.” - “Micronized: D50 and D90 by laser diffraction, method and dispersant named.” - “Assay, creatinine, dicyandiamide, LOD, ROI, heavy metals and microbiology unchanged from the catalog specification.” Then re-qualify the line, not only the drum: fill weight, weight variation, dispersion time, content uniformity and dust. A grade change that passes the COA can still fail the fill target without any chemical line changing. ## When the current grade is already right If the current grade runs well and the finished product meets its fill and dispersion targets, a finer grade adds milling cost and slows the line without improving the product. A finer cut helps a gritty drink, not a slow dissolve at the solubility limit. If the problem is creatinine, moisture or caking, the answer is in the dryer, the pack and the storage, not the sieve. The product page carries the catalog specification; the COA page shows how mesh and LOD sit on the certificate; the monohydrate versus micronized page takes the flow and fill question further; the stability page covers moisture and heat; the particle-size glossary entry defines the sieve and laser methods. ### 02.1 Creatine monohydrate vs micronized: flow, dispersion and fill URL: https://nutrition.rainwoodbio.com/products/specialty/creatine-monohydrate/grades/monohydrate-vs-micronized/ Reviewed: 2026-11-18 They are the same chemical: creatine monohydrate. Micronized is a particle-size grade, not a second hydrate and not a higher purity. The difference shows up in flow, wetting, dust and fill weight, so the choice follows the dosage form and the filling line rather than the assay. In one lineMicronized creatine is the same molecule milled finer; the grade changes flow, dispersion and fill, not the identity. ## One molecule, two particle sizes Both grades carry the same CAS number, 6020-87-7, the same formula, C₄H₉N₃O₂·H₂O, and the same release limits: assay 99.0–101.0% by HPLC, creatinine ≤100 ppm, dicyandiamide ≤50 ppm, loss on drying ≤12.0% and residue on ignition ≤0.1%. A micronized lot is not a different creatine or a purer one; it is the monohydrate after a finer mill cut. The word “micronized” describes a physical result, not a chemical one, and it has no single definition in the trade. One supplier may use it for a 200 mesh cut; another for a jet-milled powder with a much smaller median. A purchase order that says only “micronized” therefore does not specify a material. Write the distribution and the method, such as a D50 and a D90 by laser diffraction, and keep the chemical specification unchanged. ## What the certificate should say Particle-size descriptions for creatine monohydrate | Grade | Typical description | Method | 80 mesh | Passes an 80 mesh sieve, about 177 µm | Sieve analysis; percentage passing | 200 mesh | Passes a 200 mesh sieve, about 74 µm | Sieve analysis; percentage passing | Micronized | Finer than the standard cut; a distribution, not a single mesh | Laser diffraction; D50, D90 and dispersant named Sieve and laser results are not interchangeable. A sieve reports the fraction that passes an opening; a laser reports a volume distribution and depends on how the powder was dispersed. A certificate that gives a D50 without the method cannot be compared with another certificate, and a certificate that gives only “micronized” cannot be checked at all. ## Flow: the coarser grade wins Flow is the property the filling line feels first. An 80 mesh powder has less surface area per gram, picks up less moisture and pours more predictably through a hopper or a capsule feeder. A 200 mesh powder is slower and dustier. A micronized powder is the most cohesive: it holds air, clings to surfaces and tends to bridge or rat-hole in a hopper. That does not make the fine grades unusable; it makes them a different engineering problem. A forced feeder, a vibrator, a larger discharge or a dry-granulation step can restore flow, and a granulated fine grade can run better than a raw one. The feeder and hopper belong in the grade trial. A powder that flows on a bench can fail under a two-metre head in a hopper. Dust belongs to the same question. Fines travel further, coat the inside of a filling head and land on a seal that should be clean. A line with good dust extraction and closed transfer can run a 200 mesh grade; without them, expect cleaning downtime and seal rejects. ## Dispersion: the fine grade wins Finer particles expose more surface to water and wet faster. A 200 mesh or micronized grade disperses with less stirring, feels smoother on the tongue and stays suspended longer than an 80 mesh powder. That is why stick packs and fine-dispersion blends move to the finer grades, while a coarse powder can feel gritty even when dispersed. Faster dispersion is not higher solubility. Creatine monohydrate has limited solubility, roughly 13 g/L in water at room temperature, and a finer powder reaches that limit faster rather than raising it. If the formula needs a clear drink at a higher dose, no mesh will solve it; that is a presentation question, not a mill cut. Fine powders also clump if they are dumped into water too quickly: the outer layer wets, the inside stays dry, and the lump is hard to break. A short high-shear step, a pre-blend with a carrier or a slower addition usually fixes it. The coarse grade is more forgiving at addition but needs more mixing. ## Fill: volume, weight and dust A capsule fills by volume, so bulk density decides how much mass fits into a given capsule. Finer powders trap more air and usually have a lower bulk density, which means less creatine per fill at the same capsule size. A grade change can move the fill weight, the capsule size or the number of capsules per dose with no chemical change. In a tablet or a dry blend, the finer grade can improve content uniformity in a low-dose blend but can also segregate, bridge in the feed frame or slow the press. In a stick pack, the finer grade gives a better drink but puts more dust on the seal. In every case the fill target has to be re-established on the line, with bulk and tapped density measured on the lot. Check fill weight and variation, capsule or sachet size, dust, seal quality and line speed. A grade that passes all five is qualified for that line; one that passes only the COA is not. ## The cost logic, without a price Milling adds a processing step, so a finer grade usually carries a higher purchase cost per kilogram than the standard cut. That is only the first line. A finer powder has a lower bulk density, so the same mass occupies more volume, needs more package and takes more space in a warehouse or a container. In a capsule, a lower fill density can mean more capsules per dose. Dust losses, cleaning and a slower line add cost that never appears on the powder invoice. The right comparison is cost per finished unit at the target fill, not cost per kilogram. A standard grade that forces a larger capsule or a slower line can be the more expensive choice; a fine grade that improves content uniformity can pay for its milling. Run the arithmetic at the actual fill target, and include the line trial and a stability pack. ## Choosing a grade for the line Choose the coarsest grade that meets the dispersion and fill target. Every step finer adds cost and handling burden; it should buy a real improvement in the finished unit. - 80 mesh: capsules, tablets and dry blends where the line relies on gravity flow and low dust. - 200 mesh: stick packs, drink mixes and capsules that need faster wetting, a smoother mouthfeel or better content uniformity, with dust control in place. - Micronized: fine-dispersion mixes, suspensions and small fills where a defined fine distribution is worth the handling burden. Do not switch grade on a certificate alone. Run the powder on the feeder, check the fill weight and the seal, and taste the finished dispersion. The product page carries the catalog specification; the grade page compares the three cuts; the COA page shows the mesh and LOD lines; the stability page covers moisture and heat; the particle-size entry defines the sieve and laser methods. ### 03 Creatine monohydrate is stable dry; moisture and heat convert it to creatinine URL: https://nutrition.rainwoodbio.com/products/specialty/creatine-monohydrate/stability/ Reviewed: 2026-11-18 In a sealed pack, creatine monohydrate is a stable crystalline solid with a long retest period. The failure mode is water plus heat: in solution, and on a wet powder surface, creatine cyclises to creatinine. Acidic solutions and warm storage accelerate that conversion, while caking is a moisture and pressure symptom rather than a separate chemistry. In one lineA sealed pack keeps the monohydrate; moisture, heat and an acidic solution move it toward creatinine. ## The dry solid is the stable form The monohydrate is a crystal with one molecule of water built into the lattice. That water is not surface moisture and does not make the powder unstable; it is part of the identity, and the ≤12.0% loss-on-drying limit exists to keep the hydrate within its specification. A dry, sealed powder at ambient temperature has no free water for the reaction, so creatinine should stay flat over the retest period. “Dry” means low water activity in the pack, not a low LOD. A lot at the top of the LOD range can still be stable if the water is bound in the crystal, while a lot at the bottom can pick up surface moisture in a humid room. The pack, the liner and the seal do the work; the LOD line describes the material, not the storage condition. Caking is the visible sign that the pack has failed: moisture migrates to the surface, particles stick under the stack, and the drum arrives as lumps. The powder may still pass assay at that point, which is why caking is a handling defect before an analytical one. ## In solution, the clock starts Creatine has limited solubility, roughly 13 g/L in water at room temperature. Once dissolved, it is no longer protected by the crystal lattice, and the intramolecular cyclisation to creatinine proceeds. The rate rises with temperature and with acidity, so a warm, low-pH beverage is the worst case and a cool, near-neutral solution is the more stable case. The practical consequence is that a drink is a stability study, not a formula line. A ready-to-mix powder that is consumed within minutes has little time to convert; a liquid that is pasteurised, stored warm and sold over months has a great deal. The creatinine figure on the batch COA describes the powder at release, not the drink after processing. If a clear solution is the target, the dose also has to fit within the solubility limit; a fine powder disperses faster but does not raise that limit. Heat is the multiplier. A short high-temperature step can produce more creatinine than weeks at ambient, and the effect is not reversed by cooling. The process should be challenged with the highest heat load and the lowest pH the formula will see, then tested for creatine and creatinine together. ## What drives the conversion Factors that move creatine monohydrate toward creatinine | Factor | Effect | What to control | Surface moisture | Provides the water phase for cyclisation | Sealed foil pack, dry room, intact liner | Temperature | Raises the rate in dry storage and sharply in solution | Cool storage; challenge the heat process | pH | Acidity accelerates the reaction in solution | Formulate and test at the target pH; avoid unnecessary acid load | Time | Conversion accumulates even at ambient | Set a retest date and a formula shelf life | Pressure and stacking | Compacts damp powder into lumps | Pallet height, drum condition, first-in first-out | Opening and resealing | Repeated air exchange adds moisture | Single-use packs for production; reseal and use within a defined period Light is not a primary driver for this material, and neither is oxygen in the same sense as a lipid; water, heat, pH and time explain most of the change. ## A stability protocol for powder and formula For the powder, start with three released lots in the commercial pack. Store one arm at 25°C/60% RH and one at 40°C/75% RH, and test at 0, 3, 6 and 12 months: assay, creatinine, dicyandiamide, loss on drying, appearance, mesh or flow, and microbiology. Keep a real-time arm at the labelled storage condition, because accelerated data is a screening tool, not a shelf-life grant. For a formula, test the finished matrix rather than the powder alone. A beverage arm should cover the target pH, the heat process and the pack, with time points from zero to the claimed shelf life and an accelerated arm at two elevated temperatures. Measure creatine and creatinine on the same sample, and record pH at each point; a pH shift can change the rate as much as a temperature shift. For a stick pack, capsule or tablet, the risk is moisture ingress and local water activity rather than bulk solution. Test the finished unit for creatine and creatinine at the same time points, and add hardness, disintegration or seal integrity where those are the failure modes the consumer will see. Challenge the worst case, not the average. ## What the formula does to the powder Other ingredients change the water activity around the creatine particles. A hygroscopic sugar or polyol can pull moisture into the blend; an acidic component can lower the local pH once water is present; a wet granulation step adds both water and heat. The creatine may be a minor ingredient by mass and still be the ingredient that changes first. Dry blending and direct compression avoid the water phase and are the lower-risk route. Wet granulation, a heated slurry or a liquid fill puts creatine in contact with water and heat, and the creatinine figure after processing is the only honest measure of the loss. If a process needs water, keep the contact time and the temperature as low as the process allows, and validate the creatinine level in the finished unit rather than assuming the powder's figure carries through. The pack is part of the formula. A foil pouch with a good seal protects the powder; a poorly sealed stick or a drum liner that is opened repeatedly does not. ## Setting the shelf life Shelf life belongs to the pack, the storage condition and the formula, not to the catalog specification. A sealed 25 kg fiber drum and a 1 kg foil pouch can carry different retest periods because they have different headspace and different opening patterns. A sealed pack commonly starts at 24 months, but the number should come from the stability file and appear as a retest or expiry date on the lot documents. Once a pack is opened, the original shelf life no longer describes it. Reseal it, keep it dry and use it within the period defined for the opened pack. For a finished supplement, the label's storage statement and the shelf life should match the data; a label that says “store in a cool, dry place” while the stability file was generated at 40°C/75% RH is telling two different stories. The product page carries the catalog specification; the COA page shows the LOD and creatinine lines; the grade page covers mesh and flow; the compliance page covers the label and storage statement; the loss-on-drying entry explains what the LOD figure includes, and the hydrate entry defines the monohydrate. ### 04 Creatine monohydrate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/specialty/creatine-monohydrate/moq/ Reviewed: 2026-11-18 Orders start at 1 kg in a foil pouch, and production runs ship in 25 kg fiber drums; the standard 80 and 200 mesh grades leave in 1–7 days. Use the kilogram as a qualification unit from a released lot, not a retail pack. Six inputs turn an inquiry into a quotation, and the sample should be tested before the purchase order is placed. In one lineThe 1 kg pouch is a qualification unit drawn from a released lot; the 25 kg drum and the destination turn a trial into an order. ## What the kilogram is for One kilogram is enough to run a bench trial, check the mesh and the flow on your own equipment, make a small batch and keep a retained sample. It is deliberately not a production unit: a formulator who needs a tonne does not buy it a kilogram at a time, and a buyer who is still qualifying the material does not need a drum. The 1 kg pouch lets both sides test the relationship before either commits to a pallet. The pouch should come from a released lot and carry that lot's code, so the sample COA and the production COA describe the same chemistry. If the grade is a custom micronized cut, the minimum may be larger than 1 kg because the mill has to be set and the cut verified; ask before assuming the standard minimum applies. It is not a discount tier, and it does not mean every grade is stocked in a kilogram; it is the smallest unit that can be documented, shipped and tested without special handling. ## The two packs Standard packs · creatine monohydrate | Pack | Net content | Typical use | What to confirm | Foil pouch | 1 kg | Sample, bench trial, small batch | Foil structure, heat seal, lot label, whether a desiccant is present | Fiber drum | 25 kg | Production, blending, repacking | Inner liner, lid and clamp, lot code, pallet pattern The pouch is the moisture barrier and the drum is the handling unit. A 25 kg drum is not a bigger pouch: it has a liner, a lid and a headspace, and those details decide how the powder survives a pallet stack and a humid warehouse. Ask for the liner specification, the seal integrity check and the label artwork before the first drum ships. Packaging is part of the stability story, not only a logistics choice. A pouch that is opened repeatedly for sampling is no longer the pack that generated the shelf-life data. For production, keep the drum closed between uses, reseal the liner and record the opening date. ## How the ship date is set The standard 80 and 200 mesh grades carry a 1–7 day lead time. That window covers picking, labelling, the batch documents and dispatch; it does not cover a custom mill cut, a new specification, a third-party test or a destination that needs a specific customs file. Four things move the date: the grade, the documentation, the quantity and the destination. A micronized cut adds milling and a particle-size check. A new specification adds a review and possibly a method check. A full drum order may be assembled from more than one lot, which changes the COA. A destination outside the usual route adds customs and transit time that the supplier does not control. The clock starts only when the order, specification and documents are agreed; an inquiry alone does not reserve stock. If a production date is fixed, say so and ask for the ship date in the quotation, not only the lead time in days. ## What a quotation must answer A quotation can only be compared with another quotation if both answer the same six questions. Send them together, in one message, and ask the supplier to repeat them in the offer. - Product and grade. Creatine monohydrate, 80 mesh, 200 mesh or micronized; for a micronized grade, the D50 and D90 and the method. - Quantity and pack. Total kilograms, the pouch or drum count, and whether the shipment needs a pallet. - Destination and Incoterm. The delivery address or port, the Incoterm, and who handles import clearance. - Specification and documents. Your specification or the catalog specification, plus the COA, TDS, SDS, allergen statement and any certificate you need. - Quality and compliance requirements. Audit, retention sample, certification, label review, or a customer-specific test panel. - Timing. The date the material is needed, whether partial shipments are acceptable, and the delivery window. Without these six, a supplier can answer with a number that looks comparable and is not. The RFQ template lays the same six fields out as a form. ## Samples before the purchase order A 1 kg sample is the normal starting point. Ask for the lot code, the sample COA and the date the sample was drawn; test the assay, loss on drying, mesh and flow in your own laboratory, and run a small batch in the actual process. Keep half of the sample sealed for a comparison if the production lot is disputed. A sample is not a release document. The COA for the sample lot is the document that describes it, and the production lot will carry its own COA. If the sample and the production lot come from different batches, expect the impurity figures to move within the specification and check that they still fit your process. Do not qualify a supplier on a sample with no lot code, and do not use a sample as a production input unless it has been released against the specification and the pack is intact. ## What the order confirmation should carry The order confirmation should carry the specification version, the grade, the quantity and pack, the Incoterm and destination, the ship date, the document list and the storage statement. Add the non-conformance route: what happens if the COA does not match the specification, who pays for the return, and how a replacement lot is released. Payment, cancellation and partial-shipment rules are commercial terms; they belong in the same confirmation. This page does not quote a price; it sets out the inputs a quotation needs so that the commercial answer can be compared. The product page carries the catalog specification; the COA page explains the document that ships with each lot; the grade page covers the mesh choice; the compliance page lists the file; the logistics page covers shipping and documents. ### 05 Where creatine monohydrate is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/specialty/creatine-monohydrate/compliance/ Reviewed: 2026-11-18 Creatine monohydrate is sold as a food-supplement ingredient in the EU, the US and the UK, but the three markets do not apply one rule. The EU classifies it as an “other substance” under national supplement rules rather than as an Annex II vitamin or mineral; the US regulates it as a dietary supplement under DSHEA and the cGMP regulation; the UK has its own supplement regulations and a Great Britain claims register. In all three, the file proves identity, purity, contaminants and manufacturing, and the label claim remains the brand owner's responsibility. In one lineCreatine monohydrate is a food-supplement ingredient in the EU, US and UK, and the file has to prove the identity, the impurities and the label, not a health claim. ## Three markets, one file structure “Permitted” is not “approved”. None of the three markets grants a pre-market approval for a food-supplement ingredient as it does for a medicine. The brand owner is responsible for the finished product; the supplier's file supports that responsibility with evidence, not permission. The file has four layers: identity (creatine monohydrate, not another salt or a diluted powder), purity (creatinine and dicyandiamide), contaminants (heavy metals and microbiology) and manufacturing (site, process, allergens, certificates). The label layer is separate and is governed by the market where the pack is sold, not by the country of manufacture. The positions below are as of this review; the current text of each instrument governs. ## European Union: a national supplement route Directive 2002/46/EC harmonises food supplements, but Annexes I and II cover vitamins, minerals and their permitted forms. Creatine is neither, so it falls to the “other substance” route: Member States may allow it under national rules, subject to general food law and notification where required. Confirm the destination country before the label is printed. The Commission's novel-food consultation records creatine monohydrate, including a micronized grade, as consumed before 15 May 1997 and therefore not novel. That supports the ingredient; it does not replace national notification or the contaminant and labelling rules. Four instruments sit around it: Regulation (EC) No 178/2002, Regulation (EU) 2023/915 on contaminants, Regulation (EU) No 1169/2011 on food information and Regulation (EC) No 1924/2006 on claims. Check the current consolidated text; the annexes and the register are amended. ## United States: a dietary supplement, not a drug Creatine monohydrate is a dietary supplement under DSHEA. The manufacturer follows the cGMP rule in 21 CFR 111, and the label carries a Supplement Facts panel with the amount per serving and the other ingredients. Creatine has a long US marketing history, which normally supports a pre-1994 status, but a new source, process or form can still raise an NDI question; the supplier's file should answer it. FDA does not approve a supplement or its label before sale; the responsible firm does. A structure/function statement is allowed if it is truthful, not misleading and carries the required disclaimer. A disease-related statement is not. ## United Kingdom: GB and Northern Ireland diverge Great Britain applies the Food Supplements (England) Regulations 2003 and the equivalents in Scotland and Wales, with the retained food-information and claims rules. A food supplement must be labelled as such, and a claim must be on the Great Britain register and used under its conditions. Northern Ireland continues to apply the EU regime, so a pack for Belfast and a pack for Manchester can need different wording. The practical check is the destination: GB, NI, or both. ## The contaminant and impurity table The catalog limits are release limits, not a substitute for the destination market's legal limit: the stricter figure applies, and where the law is silent the specification sets its own. The batch COA should report the result and the method for each line, not only “conforms”. Catalog release limits · creatine monohydrate | Parameter | Catalog limit | Note | Lead | ≤3 mg/kg | EU supplement maximum: 3.0 mg/kg | Arsenic | ≤2 mg/kg | No harmonised EU maximum; the specification sets the figure | Cadmium | ≤1 mg/kg | EU supplement maximum: 1.0 mg/kg | Mercury | ≤0.1 mg/kg | EU supplement maximum: 0.1 mg/kg | Creatinine | ≤100 ppm | Degradation product; purity marker | Dicyandiamide | ≤50 ppm | Process impurity, cyanamide route | Loss on drying | ≤12.0% | Water of crystallisation; high by design | Residue on ignition | ≤0.1% | Inorganic residue; salt or desalting marker | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Release panel ## What the pack may say The EU and GB registers contain a creatine claim with narrow conditions on daily intake and audience. This page does not reproduce it and does not rely on it. A claim authorised in one market is not automatically valid in another, and an authorised claim used outside its conditions is an unauthorised claim. The US route is different: a structure/function statement can be used without pre-approval, with the disclaimer, while a disease-related statement cannot. In every market the ingredient name is not a claim: “creatine monohydrate” describes the material, not an effect. A claim lifted from a supplier's marketing sheet, or a “free from” statement that implies an effect, is still a label claim and belongs to the brand owner's review. ## The document set behind the lot Documents that support a creatine monohydrate lot | Document | What it proves | Issued by | Batch COA | Identity, assay, impurities, LOD, mesh and contaminants for that lot | Manufacturer's QC | Technical data sheet | Catalog specification, solubility, application and pack | Supplier | Safety data sheet | Hazards, handling and transport classification | Supplier | Specification | The agreed release limits and methods | Supplier and buyer | Allergen statement | Allergen presence or absence, and the basis | Manufacturer | GMO and non-GMO statement | Status of the raw materials and the process | Manufacturer | BSE/TSE statement | Absence of animal-derived material | Manufacturer | Manufacturing flow and origin | Site, route and traceability | Manufacturer | Certification and audit reports | Food-safety system and scope | Certification body A folder of logos is not a file. Each document should be current, scoped to the site and the product; a certificate for another grade or site does not support this lot. ## Eight checks before the file is signed - Is the material named as creatine monohydrate, with CAS 6020-87-7 and the formula C₄H₉N₃O₂·H₂O? - Does the COA show the assay basis, creatinine, dicyandiamide, LOD, residue on ignition and mesh? - Do the contaminant results meet the destination market's current limits, with methods named? - Is the manufacturing site, country of origin and process route identified? - Are the certificates current, in scope and issued for this product? - Does the label use the market's term — “food supplement” in the EU and UK, “dietary supplement” in the US? - Is every claim authorised and used under its conditions, or a structure/function statement with the disclaimer? - Is a retained sample held, and is there a route for a non-conforming lot? Start with the product page for the catalog figures, then the COA page for the release lines, the identity page for the evidence, the stability page for storage wording, and the EU note, UK note and US note for market rules. ### 06 How we prove a creatine lot is creatine monohydrate URL: https://nutrition.rainwoodbio.com/products/specialty/creatine-monohydrate/identity/ Reviewed: 2026-11-18 Identity is proved by four lines together: an IR spectrum that matches the reference, an HPLC assay on the dried basis, the water of crystallisation measured by loss on drying, and the impurity panel for creatinine, dicyandiamide and residue on ignition. The assay alone cannot prove the hydrate or exclude another creatine salt. The batch COA carries the results; the specification fixes the limits. In one lineA creatine lot is proved by the combination of IR, HPLC, the water of crystallisation and the impurity panel, not by the assay alone. ## Four checks that together identify the lot Each test answers a different question, and each has a blind spot. The certificate is useful when the layers are read together rather than as a list of separate passes. Four layers of identity · creatine monohydrate | Layer | Test | What it proves | What it misses | Paper | Lot code, product name, CAS, manufacturer, pack | Traceability from the certificate to the drum | Nothing about the chemistry | Molecular | IR against a reference spectrum | The functional groups of creatine are present | Hydrate stoichiometry and purity | Chromatographic | HPLC retention time, peak purity and assay | Creatine content and a clean peak | Water, inorganic residue and a co-eluting impurity | Solid state | Loss on drying, residue on ignition, creatinine, dicyandiamide, XRD if needed | The hydrate, the inorganic load and the process markers | Identity on its own; LOD is not specific to water The paper layer matters: a correct certificate can belong to another drum, grade or manufacturer. The lot code should match the drum, pack and retained sample. ## Assay, creatinine and LOD: reading the numbers together The first check is a mass balance, not a single figure. The catalog assay is 99.0–101.0% on the dried basis, and the monohydrate carries roughly 12% water of crystallisation. An as-is creatine content near 87% is therefore consistent with a 99% dried-basis assay and an LOD near 12%; the water is expected. A certificate that reports a 99% assay with an LOD of 2% is describing a different solid, not a cleaner monohydrate. Creatinine and dicyandiamide are the impurity side of the balance. Creatinine is the cyclised degradation product, and it rises when the powder has seen moisture and heat. Dicyandiamide is a nitrogen-rich process impurity associated with the cyanamide route. Both are capped far below the assay, at 100 ppm and 50 ppm. A lot at 90 ppm creatinine and 45 ppm dicyandiamide passes but leaves little room for a formula that adds heat or water. Residue on ignition is the inorganic side. A result near 0.1% points to a salt load or an incomplete desalting step; a low result is consistent with an organic salt that has been washed. Together they rule out several substitutions before a spectrum is run. ## IR, HPLC and the crystal form IR is a fingerprint. The spectrum should be compared with a reference run under the same preparation, and the report should name the instrument and the reference. A match supports the functional groups of creatine; it does not prove that the powder is the monohydrate, because a different creatine salt can share several bands. HPLC adds retention time, peak purity and the assay. The retention time should match the standard, and the peak purity or diode-array comparison should show a single component. A co-eluting impurity can hide inside a clean-looking peak, which is why the impurity panel is run as separate lines. The assay is calculated on the dried basis, using that lot's LOD; a certificate that does not state the basis cannot be recalculated. X-ray diffraction is the tie-breaker when the LOD is outside the expected hydrate range or when a supplier claims a crystal form that the certificate does not describe. The monohydrate and the anhydrous form have different patterns, and a physical mixture shows both. XRD is not needed on every lot, but it is the right test when LOD and assay disagree, or when a “micronized” claim needs separating from a different hydrate. ## Substitution routes to test for Creatine is not an expensive material, so the common substitution is a different creatine form sold under the monohydrate name, or a process impurity above the specification. The label and the specification have to name the salt, not only the creatine content. Creatine forms and impurities that can pass a creatine assay | Material | What changes | Test that shows it | Creatine nitrate | Different salt; nitrate load | Ion chromatography for nitrate, IR, assay | Creatine hydrochloride | Different salt; chloride and lower solution pH | Chloride test, pH, IR | Creatine ethyl ester | Different molecule with an ester group | HPLC retention and peak identity, IR | Anhydrous creatine | No water of crystallisation; a different solid form | LOD far below 12.0%, XRD, IR | Dicyandiamide | A nitrogen-rich process impurity | HPLC against the 50 ppm limit | Creatinine | A degradation product from moisture and heat | HPLC against the 100 ppm limit | Other creatine salts or diluents | Different label ingredient or lower creatine content | Assay, IR, LOD, full composition Creatine nitrate and creatine hydrochloride are legitimate ingredients when they are declared and labelled as such. The defect is an undeclared substitution, not the existence of the salt. A high nitrogen figure is not proof either: the assay is HPLC, and a nitrogen method would read nitrate or dicyandiamide as creatine. ## Writing the identity block The identity block should be a set of release tests, not a narrative. Write it so a laboratory can repeat every line and a buyer can reject against a named limit. - “Creatine monohydrate, C₄H₉N₃O₂·H₂O, CAS 6020-87-7; single salt, no other creatine form or diluent.” - “IR conforms to the reference spectrum; instrument and preparation named.” - “Assay 99.0–101.0% by HPLC on the dried basis; peak purity reported.” - “Creatinine ≤100 ppm; dicyandiamide ≤50 ppm; LOD ≤12.0%; residue on ignition ≤0.1%.” - “Heavy metals Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg; microbiology as catalogued.” - “Mesh 80 or 200, or a micronized D50/D90 by laser diffraction when ordered.” If the material is a blend, the block has to name every component; a single creatine assay cannot describe a blend. If the material is micronized, the particle-size line belongs beside the identity block, because micronization changes the powder, not the molecule. ## Five questions that close the file - Which IR reference and preparation were used, and can you send the spectrum? - Is the HPLC assay calculated on the dried basis, and what does the peak-purity check show? - What are the creatinine and dicyandiamide results for this lot, and which methods produced them? - What is the LOD, and if it is outside the usual monohydrate range, is there an XRD or IR check of the solid form? - Is this a single salt, and are any other creatine forms, carriers or diluents present? Five direct answers amount to an identity file. A single assay figure does not. The product page carries the catalog specification; the COA page shows where each figure sits on the certificate; the grade page covers mesh; the stability page explains the creatinine route; the FTIR method note and the XRD note describe the instruments. ### 01 What the COA for folic acid actually contains URL: https://nutrition.rainwoodbio.com/products/vitamins/folic-acid/coa/ Reviewed: 2026-11-18 The certificate for a folic acid lot reports appearance, identification by IR and UV, assay by HPLC on the anhydrous basis, loss on drying, residue on ignition, related substances, the heavy-metal panel, microbiology and particle size. Every line should name the test, the method and the release limit the lot was measured against. The ranges here are the catalog specification; the batch COA is the document that confirms a particular pack. Assay is the number most quotations lead with, and it is the number that says least on its own. In one lineA 99% assay on the anhydrous basis tells you how much folic acid the peak contains, not how much water the powder carries, what the degradants are or whether the lot saw light. ## The certificate as a test report A folic acid certificate is short enough to audit line by line. Read the identification tests before the assay: if IR and UV do not conform, the assay percentage describes something else. Identity, assay and purity limits on a folic acid certificate | Parameter | Method | Release limit | Appearance | Visual | Yellow to orange crystalline powder | Identification | IR and UV against a reference standard | Conforms | Assay, anhydrous basis | HPLC with UV detection | 97.0–102.0% | Loss on drying | Gravimetric, oven | ≤8.5% | Residue on ignition | Gravimetric, muffle furnace | ≤0.3% | Related substances | HPLC, peak area normalisation | ≤2.0% total | Particle size | Sieve analysis | ≥95% through 80 mesh Contaminant and microbiological limits | Parameter | Method | Release limit | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Aerobic plate count | Plate count | ≤1,000 cfu/g | Yeast and mould | Plate count | ≤100 cfu/g | E. coli and Salmonella | Absence tests | Absent ## What the HPLC assay measures, and on what basis The assay is a reversed-phase HPLC separation with ultraviolet detection, calibrated against a reference standard of folic acid. It measures the pteroylglutamic acid peak, so a co-eluting substance that absorbs at the same wavelength will be counted as folic acid, while a non-absorbing diluent will simply lower the result. The assay is therefore read with identification, related substances and residue on ignition. The number on the certificate is reported on the anhydrous basis, and the arithmetic is not a formality. With an as-is result of 94.5% and a loss on drying of 6.0%, the anhydrous figure is 94.5 ÷ 0.94 = 100.5%. Divide by one minus the moisture fraction; do not add the moisture to the assay. The 8.5% moisture allowance and the 102.0% ceiling interact. A lot at the moisture limit cannot also be at 99% as-is and stay inside the assay range: 102.0% anhydrous at 8.5% water is 93.3% as-is. When a certificate shows a high loss on drying and a high as-is assay, the two figures contradict each other, and the conversation should start before the pallet is booked. ## The related-substance limit, and limit versus result Folic acid degrades along two routes that matter to a buyer. Light and oxygen cleave the molecule to pterin-6-carboxylic acid and p-aminobenzoyl-L-glutamic acid; heat and moisture accelerate the same loss. A related-substance method separates those products from the parent peak and reports them individually, with a total capped at 2.0%. A total limit alone is weak evidence. If one unspecified impurity sits at 1.9%, the lot passes and the powder is still mostly degradation product. The specification should name the significant degradants and give each an individual limit, with the total as a backstop. Ask whether the method has been shown to resolve p-aminobenzoyl-L-glutamic acid from the main peak; a method that does not resolve it cannot cap it. The distinction between the release limit and the batch result belongs on the page. The limit is the gate; the result is what the laboratory found on that lot. A result column that reproduces the specification range is a copy of the gate, not a measurement. A certificate that says only "conforms" leaves the reader unable to reach that conclusion alone, and it hides trends that a numeric column exposes. ## What moves between batches Moisture moves first: the material can carry several percent of water, so handling and packing show up in the loss on drying. Related substances move with light exposure during drying, milling, sieving and storage, so a lot that sat in a clear container moves more than a lot that did not. Assay moves with both. Colour is the least specific test and often the first warning. The catalog range runs from yellow to orange, and crystal size and moisture shift the shade legitimately. A dull brown or olive tone is different: it suggests oxidative degradation and deserves a related-substance result. Particle size moves with milling and sieving, and a change from 80 mesh to a finer cut changes flow, dusting and blend behaviour in ways the assay will never show. A single result near an edge is less informative than a trend across three lots. Moisture climbing while assay falls is the classic pattern of a packing problem; related substances climbing while assay holds is the pattern of light exposure. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a certificate that reports only the total related substances, or a disputed result. The useful panel is narrow: HPLC assay with the related-substance profile, IR and UV identity, ICP-MS for the heavy metals, and the microbiological set. Ask the laboratory to state its detection and quantification limits, and to report individual degradants rather than a single total. A "not detected" line without a limit describes the method's sensitivity, not the sample. For a light-sensitivity dispute, test the retained sample and a freshly opened pack from the same lot side by side; the difference between them is the handling history. Chain of custody decides whether the result can be used. The sample tested should be the sample retained, with the lot code recorded on both. An outside result that cannot be tied to a pack is an opinion about a powder, not about the drum. ## What to compare between suppliers Six lines that separate two folic acid quotations | Line | What to look for | Folate form | Folic acid, calcium folinate and methylfolate are different materials and different label ingredients | Assay basis | Anhydrous or as-is, with the loss on drying beside it | Related substances | Individual degradants and the total, not the total alone | Particle size | 80 mesh with the method, or a distribution if a finer cut is offered | Heavy-metal method | ICP-MS with results, not a colorimetric pass | Traceability | Manufacturer named, lot code matching pack, certificate and retained sample Two quotations that agree on assay and disagree on the other five lines are not the same powder, and the difference will surface in the blend, the stability study or the label. The catalog specification sits on the folic acid product page. The forms are compared on the grade page; the identity tests are set out on the identity page; the storage question is on the stability page. The separation itself is described in the HPLC method note, the moisture basis is defined in the loss-on-drying entry, and the release workflow is on the quality page. ### 02 Folic acid, folinate or methylfolate: choosing a folate form URL: https://nutrition.rainwoodbio.com/products/vitamins/folic-acid/grades/ Reviewed: 2026-11-18 Folic acid, calcium folinate and the methylfolates are three different label ingredients, not three strengths of one vitamin. They differ in chemical state, in molecular weight, in the water they carry and in stability, and each has its own name on a permitted-source list. The choice is fixed by the market first, the dosage form second and the stability data third — not by which powder looks yellow in the sample bag. In one lineSwitching folate form changes the ingredient, the mass per dose, the label line and the analytical method at the same time, so it is a re-formulation rather than a substitution. ## Why the form is the first question On a nutrition panel all three read as folate. In the ingredient list they do not: folic acid is pteroylmonoglutamic acid, CAS 59-30-3, a fully oxidised molecule that is stable as a dry powder. Calcium folinate is the reduced 5-formyl derivative, supplied as a calcium salt. The methylfolates are the reduced 5-methyl derivative, supplied as a calcium salt or as a glucosamine salt. The nutrition declaration can be identical while the drum, the assay convention and the label name are not. The assay percentage is the trap. A quotation for "folate 99%" may describe the free acid, a salt, a hydrate or a trituration, and those are not interchangeable at the milligram level. Ask for the chemical name, the salt and the hydrate before comparing two numbers. ## The four forms side by side Folate forms used in supplements, by chemical state and label name | Form | Chemical state | How the assay is usually expressed | Ingredient-list name | Folic acid | Oxidised pteroylglutamic acid, C19H19N7O6 | 97.0–102.0% on the anhydrous basis, HPLC | Folic acid | Calcium folinate | Reduced 5-formyl derivative, calcium salt | On the dried or anhydrous basis; hydrate declared | Calcium folinate | Calcium L-methylfolate | Reduced 5-methyl derivative, calcium salt | As the salt; hydrate and isomer declared | Calcium L-methylfolate | 5-MTHF glucosamine salt | Reduced 5-methyl derivative, glucosamine salt | As the salt, with the glucosamine mass included | The full salt name The fourth column is the part buyers underestimate. In the EU the source must appear as it is named in the permitted list, and methylfolate entries are salt-specific; in the US the ingredient list names the salt while the Supplement Facts panel declares folate. A label written for one salt does not cover another, even when both are "methylfolate" in conversation. ## Converting mass to folate Folic acid has a molecular weight of 441.4 g/mol, and its assay is expressed as the acid, so a milligram of powder at 100% is a milligram of folate. A salt is not: the counter-ion and any water of hydration add mass that carries no folate, so a milligram of salt delivers less than a milligram of folate. That fraction comes from the molecular weight and the declared hydrate, and it should be confirmed against the assay basis on the certificate, not estimated from the label claim. The second conversion is the label unit. The EU and the UK declare folate in micrograms against a nutrient reference value of 200 µg, so a 400 µg dose is 200% of the reference value. The US declares folate in micrograms of dietary folate equivalents, and the DFE convention applies a factor to folic acid taken with meals. At a factor of 1.7, a 400 µg DFE target corresponds to about 235 µg of folic acid. The factor and the meal condition sit in the labelling regulation; confirm the current text before the artwork is fixed, because the number on the panel depends on it. At these masses the raw material is not the constraint. One kilogram of folic acid is 1,000,000 mg, which is 2.5 million doses at 400 µg before any overage. The constraint is distribution: at 400 µg in a 500 mg capsule the folate is 0.08% of the fill, and at 1 kg in a 500 kg blend it is 0.2%. Blend uniformity, not drum assay, decides whether the label claim holds in the finished unit. ## Stability and handling by form Folic acid is the most robust of the three as a dry powder, provided it is kept dark and dry. It is still light-sensitive, and the yellow to orange colour is a poor guide to how much light it has seen. The reduced forms are more reactive: the folinate and the methylfolates oxidise more readily, and heat and moisture accelerate the loss. The commercial salts exist to manage that, and the supplier's stability data should be read in the matrix you will actually use, not as a general claim. Particle size and flow differ as well. The 80 mesh crystalline powder disperses well in a dry blend but carries static and dusts easily; a milled 100 mesh grade or a granulated grade changes flow and can reduce segregation in a low-dose blend. Whichever form is chosen, the pack has to be light-tight, and the 1 kg foil pouch is the smallest unit that keeps the certificate, the lot code and the retained sample aligned. ## What changes in the specification and the label A form switch is a new specification, a new method and a new label. The assay method validated for folic acid will not quantify a methylfolate salt without revalidation, and the related-substance profile is different because the degradants are different. The water limit changes with the hydrate. The label name changes. The overage changes if the stability curve changes. Write the specification around the form, not around the vitamin: the chemical name with the salt and hydrate, the CAS number for that substance, the assay basis, the identity tests, the individual degradants, the water limit and the mesh. Then state the label market and the name that will appear on it, so the specification and the artwork cannot drift apart. ## When to stay with folic acid Folic acid remains the default where the label is already approved, where the permitted list for the destination market has not been checked for the salt, where the dosage form is a dry capsule or tablet and the stability data for the alternative is thin, or where the analytical method in the buyer's laboratory covers only the acid. None of those are reasons of principle; they are reasons of file readiness. Switch when the market permits the salt by name, when the label arithmetic has been rebuilt around the salt's folate fraction, and when there is matrix-specific stability data for the finished pack. A switch made on the strength of a sample bag, without the file, is the harder version of the same decision. The forms are compared in the folic acid versus methylfolate note, and the catalog specification is on the folic acid product page. The certificate lines are set out on the COA page, the storage question is on the stability page, and the market rules are on the compliance page. The reference values are defined in the NRV entry and the daily-value entry. ### 03 Folic acid is light-sensitive; the matrix and the pack decide the shelf life URL: https://nutrition.rainwoodbio.com/products/vitamins/folic-acid/stability/ Reviewed: 2026-11-18 Folic acid in a sealed, light-tight pack is one of the more durable vitamins; the same powder in an open tray near a window is not. Light drives the first measurable loss, heat and moisture accelerate it, and in a finished product the excipients and the pack decide whether the label claim survives to the end of the shelf life. The raw-material certificate describes the day of release; only a study in the matrix answers the shelf-life question. In one lineLight starts the loss, but the pack, the matrix and the water activity decide how much of the label claim is left at the end of the shelf life. ## The powder: dry, dark and sealed The catalog allows up to 8.5% loss on drying, which is high for a crystalline vitamin and is the first thing to understand about handling. That water is part of the material as released, and once the pack is open it gives hydrolysis and oxidation a medium to work in. A foil pouch keeps it there; a clear jar does not. Three habits matter more than any storage claim: keep the pouch closed between withdrawals, take out only the portion for the batch, and never leave the opened pouch under a window or a bright luminaire. A dark cupboard at room temperature is adequate; a warm warehouse roof space is not, because heat and moisture move together. Colour will not tell you how much light the powder has seen. The yellow to orange range is legitimate, and a lot that has lost a few tenths of a percent to photodegradation can look unchanged. The related-substance result is the instrument, not the eye. ## Water is the step that changes the rate Any process that puts folic acid into solution — a wet granulation, a film-coat suspension, a syrup, a gummy cook — moves it from a protected crystal into a medium where light and oxygen reach every molecule. The alkaline solution that dissolves it more easily is not a protected solution; it is simply a more concentrated one. The controls are procedural rather than chemical. Use water only where the dosage form needs it. Keep the wet mass cool and covered, and keep vessels out from under direct lighting. Dry at the lowest temperature that reaches the target moisture, and test the dried granulate for related substances as well as assay, because a granulation can pass on assay while the degradant total has doubled. Where the dose is low, wet granulation is a uniformity step rather than a solubility step; direct compression avoids the water entirely and is often the better route for a 400 µg tablet. ## What actually moves the number Degradation routes for folic acid and the control that answers each | Factor | What it does | Control | Light, especially UV | Cleaves the molecule; the first loss in most packs | Opaque or amber pack, foil laminate, no clear windows | Heat | Accelerates hydrolysis and oxidation; drying and cooking steps matter most | Lowest workable process temperature; cool storage | Oxygen | Oxidative cleavage, helped by trace metals | Nitrogen flush, low headspace, antioxidant excipients where compatible | Moisture | Provides the reaction medium; raises water activity | Moisture-barrier pack, desiccant where appropriate, dry handling | pH | Acidic solutions hydrolyse faster; alkaline solutions dissolve more | Keep the matrix near neutral where the formula allows | Metal ions | Iron and copper catalyse oxidation at trace levels | Specify the heavy-metal panel; avoid contaminated excipients A warm, humid, lit environment moves all six at once, which is why the accelerated study exists. ## Designing the stability programme Put three things on test, not one: the raw material in its commercial pack, the premix or blend as it will be held, and the finished unit in the pack that will be sold. A study that covers only the drum tells you nothing about a clear blister. The usual design runs long-term conditions at 25 °C and 60% relative humidity, an intermediate condition at 30 °C and 65% where the destination climate calls for it, and an accelerated condition at 40 °C and 75% for six months. Timepoints of 0, 3, 6, 9, 12, 18 and 24 months cover the common claims, and the study should run at least to the date you intend to claim. Photo-stability is a separate experiment, not a line in the long-term study. The ICH Q1B option 1 exposure — 1.2 million lux hours of visible light plus 200 W·h/m² of near ultraviolet — is the usual reference, and the sample should be in the marketed pack, with an unprotected control beside it. The control is what shows whether the pack is doing the work or the molecule is simply robust. Test the right attributes: appearance, assay, related substances and loss on drying for the powder; the label claim, degradation products and the physical attributes of the dosage form for the finished unit. ## The matrix decides more than the raw material does A dry two-piece capsule is the gentlest matrix: low water, no heat, no compression, and a direct-compression tablet is close behind. A wet-granulated tablet adds water and a drying step. A gummy is the hardest case: the cook combines heat, water and an acidic pH, and the finished gummy keeps a water activity that keeps the reaction going. Powder sticks and drink mixes depend on the laminate: a foil with a good moisture barrier protects the powder, while a clear film that lets light through does not, however good the seal. At a 400 µg dose the folate is a small fraction of the unit, which adds a second issue: the premix or diluent that carries it has its own stability and its own moisture. A carrier that picks up water in storage can deliver the folate to the tablet press already partly degraded. Ask what the folate is blended with before it reaches the blender. ## Assigning the shelf life The shelf life of the finished product comes from the finished-product study, not from the raw material's retest period. The raw material's date belongs on the certificate; the finished product's date is a claim, and it needs data in the marketed pack. The label storage statement has to match the study. If the study ran at 25 °C, the label cannot invite storage at 40 °C; if the pack is a clear blister, the statement has to carry the light warning that the pack cannot enforce. Where an overage is used to cover analytical loss, it covers the loss curve, not a bad pack. The working sequence is therefore: choose the pack for light and moisture, run the study in that pack, write the storage statement from the study, and set the shelf life from the data. The folic acid product page carries the catalog specification; the certificate lines are on the COA page; packing options are on the MOQ page; the label and market rules are on the compliance page. The moisture test is described in the loss-on-drying entry, the assay in the HPLC method note, and the release workflow on the quality page. ### 04 Folic acid: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/vitamins/folic-acid/moq/ Reviewed: 2026-11-18 The minimum order for folic acid is 1 kg, in a foil pouch, with a 25 kg fiber drum as the production pack; a released lot ships in 1–7 days. The minimum is a traceability unit rather than a volume limit, because a kilogram carries about 2.5 million doses at 400 µg. A quotation needs six details from the buyer: form and particle size, specification and assay basis, quantity and pack, destination and Incoterms, documents, and the label market with any special test. In one lineOne kilogram is the smallest unit that can carry its own lot code, certificate and retained sample — and at 400 µg a dose it is far more material than a first order usually needs. ## Why the minimum is 1 kg Folic acid is used at a mass that most buyers underestimate. A capsule at 400 µg carries 0.4 mg, so 10,000 capsules with a 30% overage consume about 5.2 g, and half a million capsules consume about 260 g. One kilogram is 1,000 g: roughly four campaigns of that size, or 2.5 million doses before overage. That arithmetic is why the minimum is not a volume threshold. It is the smallest pack that a manufacturer can release as a lot, with a lot code, a certificate and a retained sample that all refer to the same material. Below a kilogram the material is usually repacked from a larger lot, and the link between the certificate and the pack in the buyer's hand becomes an assertion rather than a record. The minimum is therefore also the qualification unit: a buyer who needs 200 g for a trial is better served by a 1 kg pack whose certificate can be compared with the production lot than by a split with no certificate of its own. The same pack on the repeat order makes that comparison possible. ## The two standard packs Standard packs for folic acid, 80 mesh crystalline powder | Pack | Net content | Typical use | Handling | Foil pouch, aluminium laminate | 1 kg | Sample, qualification, pilot batch | Reseal after each withdrawal; keep cool, dry and dark | Fiber drum with double liner | 25 kg | Production campaign | Keep the liner closed; store away from light and moisture The laminate does two jobs: it blocks light, the first degradation route for this material, and it slows moisture pickup. A sample in a clear bag tells the buyer nothing about either. Milled and granulated variants are available on request, and the pack is agreed with the order because a 100 mesh powder and a granulate flow differently and dust differently. The pack label should carry the product name, the form, the lot code, the net content, the storage statement and the manufacture or retest date. The lot code is the link between the pack, the certificate and the retained sample; without it the certificate describes a product, not a delivery. An opened 1 kg pouch is not a dispensing pack: each opening exposes the surface layer to light and moisture, and the remainder should be resealed and used within the period the stability data supports. The 25 kg drum is a production pack, not a storage silo. ## Lead time and what moves it The standard 80 mesh grade is quoted at 1–7 days from a released lot. That window covers release, packing and dispatch, not the transit to the destination. The clock starts when the specification, the order and the document set agree; a purchase order that says only "folic acid" is not a starting signal, because the form, the mesh and the pack are still open. Several things move the date: a 100 mesh or granulated grade, a custom pack, a market-specific document set, a test that is not on the standard certificate, or a destination that requires a pre-shipment check. If the date is critical, state when the material has to be at the destination, not only when it has to be ordered, and say whether a partial shipment on the standard grade would help. ## The six details a quotation needs What to put in an enquiry so the answer is a specific offer | Detail | Why it changes the offer | Form and particle size | Folic acid, calcium folinate and methylfolate are different materials; 80 mesh and 100 mesh are different packs | Specification and assay basis | An anhydrous assay range and a related-substance limit define the release test | Quantity and pack | 1 kg pouch and 25 kg drum are different units, labels and handling | Destination and Incoterms | Freight, documents and responsibility change with the route | Documents required | COA, TDS, SDS, allergen, GMO and origin statements are separate items | Label market and special tests | EU, US and UK labels use different names and units; an extra test is a different release protocol An enquiry with these six details can be answered with one offer. An enquiry that says only "folic acid 99%" produces a range, because the supplier has to guess the form, the basis and the market file. ## Samples and qualification A sample should be drawn from a released lot and should arrive with that lot's certificate. The lot code on the sample, the certificate and the retained sample should be identical; if they are not, the sample cannot qualify the production material. Ask for a small quantity in the commercial laminate rather than a bag of powder, and find out which lot it came from. Qualification needs more than a teaspoon of powder. A 1 kg pack lets the buyer run identity, a trial blend and a short stability check from one lot, and keeps enough material for a repeat test if a result is disputed. Record the sample lot code in the trial record; when the production order arrives, compare its lot code and certificate with the sample. ## Terms that belong in the order The purchase order should reference the specification, the form, the mesh, the pack, the lot certificate and the retest date, and should state the documents that must travel with the shipment. Add the non-conformance window, the address for the retained sample and the rule for a lot that arrives outside the agreed light or moisture conditions. For a repeat order, a quality agreement can fix the specification, the change-notification rule and the annual review, so that each order does not reopen the same questions. Change notification matters more than usual here: a switch of manufacturer, drying step or laminate changes the light and moisture exposure, and the certificate alone will not show it. Incoterms and payment terms are commercial, but they affect the file. A delivered order and an FOB order place different responsibilities on transport conditions, and a material that is light-sensitive in transit needs the shipping instruction in the order rather than in a later email. The MOQ is stated on the folic acid product page. The certificate lines are on the COA page, the pack-and-light question is on the stability page, and the market file is on the compliance page. Packing and shipping options are described on the logistics page, the release workflow is on the quality page, and the term itself is defined in the MOQ glossary entry. ### 05 Where folic acid is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/vitamins/folic-acid/compliance/ Reviewed: 2026-11-18 Folic acid is a permitted vitamin source in food supplements in the EU, the US and the UK, but the permission is form-specific and the file has to prove the form, the contaminants and the label. Three things decide whether a pack clears: the source-list entry for the exact substance, the contaminant limits of the destination market, and the claim wording that may appear on the pack. The rest of the file turns those three into a shipment. In one linePermitted in all three markets is the start of the question; the entry that names the substance, the contaminant annex and the label rule are what the file has to match. ## Three regimes, one structure The EU regulates food supplements under Directive 2002/46/EC, which works from a positive list of vitamins, minerals and their sources. In the US, folic acid is a dietary ingredient under the Federal Food, Drug, and Cosmetic Act as amended by DSHEA, with cGMP under 21 CFR 111 and the Supplement Facts panel under 21 CFR 101.36. The UK applies the Food Supplements (England) Regulations 2003 as amended, mirrored in the devolved nations, with assimilated nutrition labelling. All three ask the same three questions. In all three, the identity of the substance is the entry point. "Folate" is a nutrition term, not a permitted source; the file has to name the substance that is in the drum and show that the name on the label is the name on the source list. A pharmacopoeial monograph for folic acid is the usual purity reference; the catalog specification is a separate document. ## The EU source list and the label Folic acid appears in the vitamin list of Directive 2002/46/EC and as a permitted source in Annex II, and the label must name the source as the Annex names it. The Annex has been amended to add methylfolate salts, each a separate entry with its own name, so a label that says "methylfolate" without the salt does not match an entry. Check the consolidated Annex II rather than a summary. The nutrition declaration gives folate in micrograms with the percentage of the nutrient reference value, 200 µg under Regulation (EU) No 1169/2011, so a 400 µg daily portion is 200%. The EU has not harmonised maximum levels for vitamins in supplements; several member states set their own, so a multi-market product has to be checked market by market before the dose is fixed. Folic acid is not one of the regulated allergens and carries no mandatory warning of its own. The pack still needs the storage statement, the lot code, the net quantity and the operator's name and address, with the source name translated. ## The US route is a different route In a dietary supplement, folic acid is a lawful dietary ingredient; in a conventional food it is a food additive under 21 CFR 172.345, a different permission with different conditions. For a supplement, the Supplement Facts panel declares folate in micrograms of dietary folate equivalents with the percentage of the daily value, and the ingredient list names the source. The daily value for folate is 400 µg DFE for adults and children four years and older, and the DFE convention applies a factor to folic acid rather than declaring the mass as weighed. The tolerable upper intake level for folic acid from supplements and fortified foods is 1,000 µg per day, set by the Institute of Medicine in 1998; it is a formulation ceiling. Manufacturing sits under 21 CFR 111. ## Contaminants: the table the file has to meet Contaminant limits for a folic acid food supplement, by market | Contaminant | EU and UK | US | Lead | 3.0 mg/kg in food supplements | No federal limit for supplements; California Prop 65 applies | Cadmium | 1.0 mg/kg in food supplements | No federal limit for supplements | Mercury | 0.10 mg/kg in food supplements | No federal limit for supplements | Arsenic | No harmonised EU limit; national limits apply | No federal limit for supplements The EU limits sit in Regulation (EU) 2023/915, which replaced the earlier contaminants regulation; the UK applies an assimilated version. The catalog specification sets Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg: it meets the EU limits for three of the four and sets a figure for arsenic where the EU has none. That is a specification choice, not a legal requirement, and it is the line most likely to differ between two similar offers. In the US, no federal limit does not mean no question. Proposition 65 sets a maximum allowable dose level for lead of 0.5 µg per day and requires a warning above it, calculated on the daily intake rather than the concentration; a 3 mg/kg powder at a 400 µg dose delivers about 0.0012 µg of lead, well below the threshold, but the calculation belongs in the file. State rules and customer specifications can be tighter than either framework. ## Where the claim boundary sits In the EU and the UK, only claims on the authorised register may be used, and each entry carries conditions of use, including a minimum quantity in the daily portion. The folate entries are nutrient-function claims, and the register wording is the only wording that can be used: a paraphrase is a different claim. In the US, structure/function claims are permitted with the required disclaimer and, where applicable, the notification to the agency. Disease claims are not permitted for a dietary supplement. Nothing here is a claim about the ingredient; a claim on a finished pack has to come from the register or the notification. ## The file that travels with the lot Documents a folic acid shipment should be able to produce | Document | What it has to show | Certificate of analysis | Lot code, methods, limits and results; assay on the anhydrous basis | Specification and TDS | The agreed limits, the mesh, the pack and the storage statement | SDS | Handling, dust, light and moisture precautions in the current format | Contaminant and microbiological statements | Heavy metals by ICP-MS and the micro panel, with methods | Allergen, GMO and irradiation statements | Declarations for the 14 regulated allergens and for process treatments | Origin and flow chart | Manufacturing site and the process steps that affect light and moisture | Food-contact declaration | The pouch and liner declare compliance for the destination market ## Before the pallet ships - The label name matches the permitted source entry for the destination market. - The nutrition declaration uses the right unit and reference value. - The dose sits under the applicable national or regional ceiling. - The certificate reports the assay on the anhydrous basis and the loss on drying beside it. - The heavy-metal results meet the destination limit, with the method named. - The claim text comes from the register or the notification, with its condition of use. - The storage statement matches the pack and the stability data. - The food-contact declaration covers the pouch and the drum liner. The market rules are summarised on the EU, US and UK regulatory pages. The catalog specification is on the folic acid product page; the certificate lines are on the COA page; the storage question is on the stability page; the pack sizes are on the MOQ page; the reference values are defined in the NRV entry. ### 06 How we prove a folic acid lot is folic acid URL: https://nutrition.rainwoodbio.com/products/vitamins/folic-acid/identity/ Reviewed: 2026-11-18 Identity for a folic acid lot is proved in four layers: the document that ties pack to lot, the infrared and ultraviolet spectra that match the substance, the chromatogram that quantifies it, and, if a result is disputed, an orthogonal technique such as mass spectrometry. The catalog specification requires IR and UV to conform and an HPLC assay of 97.0–102.0% on the anhydrous basis. With the related-substance profile and lot traceability, those tests prove the powder. In one lineIR says the powder is the right molecule and HPLC says how much of it is there; neither says what else is in the drum, which is why the impurity profile and the lot trail belong to identity too. ## Four layers, each answering a different question What each identity layer proves, and what it cannot | Layer | Evidence | What it proves | What it misses | Document | Name, CAS 59-30-3, lot code, certificate, retained sample | The paper describes this pack | Nothing about the powder | Spectroscopic | IR and UV against a reference standard | The functional groups and the chromophore are those of folic acid | A few percent of a non-absorbing diluent | Chromatographic | HPLC assay and related substances | How much folate is present, and what else absorbs | Species with no chromophore at the detection wavelength | Orthogonal | LC-MS or NMR on request | Molecular mass and structure | Nothing; but it is slow and outside a release protocol The layers are cumulative: an assay result alone is one layer, while a certificate with the spectra and the chromatogram gives three and lets the lot be audited rather than trusted. ## Reading the IR and UV identification The infrared spectrum is a fingerprint: for folic acid, the carbonyl and amide bands of the glutamic acid side chain together with the pteridine ring system, compared against a reference spectrum run under the same conditions. Sample preparation matters: a potassium bromide disc and an attenuated-reflectance accessory give different spectra; extra bands the reference lacks point to a second substance. The ultraviolet test uses a dilute alkaline solution, where folic acid gives a characteristic absorption spectrum; because it compares spectrum and intensity, a visible dye can leave the ultraviolet region almost unchanged. Both tests pass for a powder that is 97% folic acid and 3% water, which is why identity cannot be read as a purity statement: IR and UV answer "is this the right molecule", and the assay answers "how much, and what else". ## The chromatogram does the quantitative work The assay is a reversed-phase separation with ultraviolet detection and a reference standard, reported on the anhydrous basis. The same run, read as a peak-area profile, gives the related substances: a total capped at 2.0%, with individual limits for the two degradation products that matter, pterin-6-carboxylic acid and p-aminobenzoyl-L-glutamic acid. Three things belong in the data package: the retention time of the main peak against the standard, a peak-purity check from a diode-array detector, and the individual impurity results, since 1.9% from one peak differs from 1.9% over six. The 97.0% floor leaves three percent of room, and a non-absorbing diluent can hide there while the impurity total stays clean. Degradation adds peaks and dilution does not, so a flat impurity profile at 97.4% points to dilution rather than degradation. ## The ratio between the two cleavage fragments Folic acid hydrolyses at the C9–N10 bond, and that single break releases one molecule of pterin-6-carboxylic acid and one of p-aminobenzoyl-L-glutamic acid. The two fragments should therefore appear in roughly equimolar amounts in a lot that has aged or taken up moisture; a large excess of one points to a spiked or residual intermediate rather than storage loss. The same arithmetic applies to the certificate: the anhydrous assay is the as-is result divided by one minus the loss on drying, and the basis has to be stated before comparing with the 97.0–102.0% window. ## Where XRD would and would not help Folic acid is crystalline, so a diffraction scan of the pure substance gives a phase pattern, and different solid forms give different patterns. That makes XRD useful in a solid-state study of polymorphism or a form change after milling, and it can show a crystalline diluent such as lactose. It is not the release identity test: the pattern needs a reference material run under the same conditions, it does not quantify the folate, and an amorphous lot leaves no pattern to read. Identity rests on infrared, ultraviolet and the HPLC assay, with LC-MS or NMR when a peak assignment is disputed. ## Three ways a folate powder can be wrong Another folate. Calcium folinate and the methylfolate salts are separate ingredients with separate label names, and a lot of one sold as the other is mislabelled rather than dilute. The molecular mass, the infrared spectrum and the retention time all differ under a method that resolves the forms; a method validated only for folic acid may report the acid peak and miss a folinate. A dye. The colour range runs from yellow to orange, easy to imitate and easy to restore on a yellowed lot. A dye shows up as an unexpected peak or a peak-purity failure; ask for the chromatogram, not a photograph. A diluent. Lactose, dextrose, starch, silicon dioxide and magnesium stearate are plausible additions. Water is excluded by the anhydrous calculation, a non-volatile diluent is not: it lowers the assay and, if inorganic, raises the residue on ignition above 0.3%. That is why the residue belongs next to the assay, and the specification should exclude added carrier. ## Writing identity into the specification A testable identity clause has four parts: the chemical name and CAS number; the reference standards and techniques for the identity tests; the assay basis with its method; and a statement of what must not be present. For this grade that reads as folic acid, CAS 59-30-3, with IR and UV conforming to the reference, assay 97.0–102.0% on the anhydrous basis by HPLC, related substances with individual limits and a 2.0% total, residue on ignition ≤0.3%, and no added dye, carrier or diluent. Add the evidence clause: the chromatogram, the spectra and the impurity table are available for the lot, and the lot code on the certificate matches the pack and the retained sample. Name the mesh too, because a specification without a particle size does not describe the powder. ## Five questions for the supplier - Which folate is this, and is any salt, hydrate, carrier or dye present? - Is the assay reported on the anhydrous basis, and what is the loss on drying for this lot? - Can you send the chromatogram with the peak-purity result and the individual impurity figures? - Were the IR and UV identity tests run against a reference standard, and can we see the spectra? - Who manufactured the lot, and does the retained sample carry the same lot code as the pack? Five answers amount to an identity file. The tests are summarised in the HPLC method note and the infrared method note. The catalog specification sits on the folic acid product page; the certificate lines are on the COA page; the forms are compared on the grade page; the retained-sample rule is defined in the retained-sample entry. ### 02.1 Folic acid vs methylfolate: form, dose and label URL: https://nutrition.rainwoodbio.com/products/vitamins/folic-acid/grades/folic-acid-vs-methylfolate/ Reviewed: 2026-11-18 Folic acid and methylfolate are different substances, not two grades of one vitamin. Folic acid is the fully oxidised pteroylmonoglutamic acid; methylfolate is the reduced 5-methyl derivative, supplied as a calcium salt or a glucosamine salt rather than as the free acid. A label declaring 400 µg of folate from either is not declaring the same ingredient or the same mass, and the two sit on separate entries of the EU source list. The choice turns on the label, the dose arithmetic and the stability data in the finished pack. In one lineThe two are not interchangeable at the milligram level: the salt, the folate fraction and the label name all change, and a formula built on one cannot simply be relabelled as the other. ## What is actually in the drum Folic acid and methylfolate compared as materials | Property | Folic acid | Methylfolate | Chemical state | Fully oxidised pteroylmonoglutamic acid | Reduced 5-methyl derivative | Identity | CAS 59-30-3, C19H19N7O6, 441.4 g/mol | Salt-specific identity; the free acid is not the commercial form | Commercial form | Crystalline powder, 80 mesh, no carrier | Calcium salt or glucosamine salt, often on a carrier | Assay basis | 97.0–102.0% on the anhydrous basis, HPLC | Expressed as the salt, on the dried or as-is basis | Label name | Folic acid | The full salt name The assay-basis row is where most comparisons fail: a methylfolate quotation describes a salt whose counter-ion carries no folate, while a folic acid quotation describes the acid itself, so the two percentages have different denominators. ## What a microgram of each delivers Folic acid is its own folate reference: on the anhydrous basis at 100% assay, one milligram of powder is one milligram of folate as the acid. A methylfolate salt is not. Its folate fraction follows from the molecular weight of the salt and the number of water molecules in the hydrate, and it is typically well below the mass of the salt. That fraction, not the assay percentage, is what converts a label claim into a weigh-out. The second difference is the label unit. In the EU and the UK the declaration is folate in micrograms against a nutrient reference value of 200 µg, so the form has to be converted to folate mass before the percentage is calculated. In the US the declaration is in dietary folate equivalents, and the DFE factor applied to folic acid is not automatically the factor for a methylfolate salt; the current labelling rule and the salt's identity decide the arithmetic. Fix the label number with the regulation in hand, not with a rule of thumb carried over from another product. The third is the overage: it is set from the loss curve of the specific ingredient in the specific matrix, so an overage carried over from folic acid is not established for methylfolate. ## Which one survives the process As a dry powder in a sealed, light-tight pack, folic acid is the more robust of the two. It is still light-sensitive, and the related-substance profile moves when a lot is exposed, but the crystalline acid tolerates dry storage and direct compression well. The reduced methylfolate is more reactive: it oxidises more readily, and heat and moisture accelerate the loss, which is why the commercial salts and the stabilised grades exist. The gap widens with the process. A dry capsule or a direct-compression tablet keeps both forms in a low-water environment. A wet granulation, a film coat or a gummy cook puts the ingredient into water and heat, and the reduced form has further to fall. Both need an opaque pack: a clear blister or a transparent stick film is a light-exposure experiment, whichever form is inside. The practical rule is that the stability data has to belong to the form. A study run on folic acid does not support a methylfolate claim, and a supplier's general statement about "folate stability" is not a matrix result. Ask for the study in the dosage form you will sell, in the pack you will use. ## What the label can carry In the EU, the permitted-source list names folic acid and, by amendment, certain methylfolate salts. Each salt is a separate entry with its own name, so the label has to use the name of the entry that matches the drum. "Methylfolate" alone is not an entry, and a label written for a calcium salt does not cover a glucosamine salt. In the US, the Supplement Facts panel declares folate while the ingredient list names the source; the two forms are separate ingredients, and a product that contains both has to declare both. The nutrition declaration is not the only line that changes. The ingredient list, the allergen and carrier statements, the storage statement and the claim conditions all follow the source. A claim authorised for folate is tied to the nutrient and to the daily portion, and the register entry is the only wording that can be used. A form switch is therefore a new label, not an edit: new source name, new unit arithmetic, new overage and, where a carrier is present, a new ingredient-list entry for the carrier as well. ## When each one is the right choice Folic acid is the default when the artwork is already approved, when the product is a dry capsule or tablet, when the destination markets are several and the source list has to cover all of them, and when the buyer's laboratory method is validated for the acid. It is also the simpler file: one identity, one assay basis, one set of degradants. A methylfolate salt is the choice when the label market permits that specific salt by name, when the formula and the pack have been studied with that salt, and when the analytical method covers it — a method validated for folic acid will not quantify a methylfolate without revalidation. Those are file conditions. A switch made before the file exists is a formula change without a file. ## What to write when you switch Write the specification around the substance, not the vitamin name: the full chemical name with the salt and hydrate, the CAS number for that substance, the assay basis and method, the identity tests, the individual degradants, the water limit, the particle size or carrier, and the label name for each market. Add the statement that the material is a single form, with no other folate source blended in, unless a blend is what the order asks for. Then test the switch against the arithmetic: folate mass per unit, label percentage, overage and end-of-shelf-life claim. If any of the four cannot be supported by data, the form is not ready to change. The wider comparison is on the grade page; the catalog specification is on the folic acid product page; the certificate lines are on the COA page; the storage question is on the stability page; the source lists and label rules are on the compliance page; the identity tests are on the identity page. The reference values are in the NRV entry and the daily-value entry. ### 01 What the COA for niacinamide actually contains URL: https://nutrition.rainwoodbio.com/products/vitamins/niacinamide/coa/ Reviewed: 2026-11-18 The certificate for a niacinamide lot reports appearance, identification by IR, assay by HPLC, the pH of a 10% solution, the melting range, loss on drying, residue on ignition, nicotinic acid, the heavy-metal panel and microbiology. Each line needs a method and a release limit, not only a number. The catalog specification is 99.0–101.0% by HPLC, pH 5.5–7.5, melting 128–131 °C, loss on drying ≤0.5%, residue on ignition ≤0.1% and nicotinic acid ≤10 ppm; the batch COA reports the lot result against those limits. In one lineThe assay says how much pyridine-3-carboxamide is present; the identity lines and the nicotinic acid figure say whether it is the right one. ## The certificate as a test report A certificate becomes auditable when every row answers three questions: what was measured, which method produced the figure, and which limit the lot was released against. The table is the catalog specification, not a batch result; the batch COA carries the result for the lot. Identity, assay and purity · niacinamide | Parameter | Method | Release limit | Appearance / identification | Visual; IR | White crystalline powder; conforms to reference | Assay | HPLC | 99.0–101.0% | pH (10% solution) | Potentiometry | 5.5–7.5 | Melting range | Capillary method | 128–131 °C | Loss on drying | Gravimetric | ≤0.5% | Residue on ignition | Gravimetric | ≤0.1% | Nicotinic acid | HPLC | ≤10 ppm | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent The assay is the headline, but it is not the identity. HPLC with an external niacinamide standard measures the amount of material that elutes at the niacinamide retention time and responds at the detection wavelength; a peak with the right retention time and the wrong functional groups is still the wrong molecule. That is why the IR identification, the pH and the melting range sit beside the assay rather than in a footnote. ## What each figure is measured against The assay is reported on a stated basis. A figure calculated on the dried substance and a figure calculated as-is are not the same number, and the certificate should say which one applies. The 99.0–101.0% window is a release range that includes method uncertainty: an HPLC result of 100.4% is a comparison with a reference standard, not a statement that the powder is 100.4% pure. pH is measured on a 10% solution and is an identity and quality check. A pure niacinamide solution sits close to neutral; a shift toward the acid side points to nicotinic acid or residual acid from the route, and a shift toward the alkaline side points to a nicotinate salt or an alkaline residue. The melting range does a different job: 128–131 °C is the window for niacinamide, while niacin melts near 236–239 °C, so a mixed or substituted lot usually shows a low, broad or split melt. Neither test identifies the molecule on its own, and neither replaces the IR spectrum. Loss on drying measures water, not purity. Residue on ignition measures inorganic material left after combustion, so it catches a mineral diluent or a salt that the assay may miss. Nicotinic acid is the amide's hydrolysis product and a route impurity; at a 10 ppm limit it is the line where the method's limit of quantification matters as much as the result. What each figure proves and what it does not | Figure | What it proves | What it does not prove | HPLC assay | Amount of material matching the standard at the niacinamide retention time | That the peak has the niacinamide structure; the impurity profile | IR identification | The amide and pyridine functional groups match the reference | How much is present; the level of nicotinic acid | pH (10% solution) | The acid-base character of the lot | The identity on its own; the assay | Melting range | The solid's melting behaviour and gross purity | A trace impurity at the part-per-million level | Loss on drying | Water and volatile material | Purity or the amount of niacinamide | Nicotinic acid | The hydrolysis and route impurity at the stated limit | Other related substances the method does not separate ## Release limit versus batch result The release limit is the gate; the batch result is what the laboratory measured on the lot. Both belong on the certificate, in separate columns, with the method named. A result column that repeats the specification is a copy of the gate. Ask for the raw figure, the basis, the method and the impurity's limit of quantification. The same rule applies to “conforms”: an IR identification is only useful if the certificate names the reference spectrum or the method used for the comparison. A pH or melting result reported without the sample concentration and the heating rate is difficult to audit; the method should state both. ## What moves between batches Assay and pH move with the neutralisation and crystallisation steps. A lot that is washed poorly can carry residual acid and sit low in pH; a lot that is overdried can lose water and read high on assay if the result is calculated as-is. Nicotinic acid moves with hydrolysis during drying and storage, which is why the impurity limit is a stability marker as well as a release test. Colour can move with heat or trace iron while the assay still passes. Particle size is a physical variable rather than a purity one. The catalog powder is a crystalline solid, and a finer mesh changes flow, dusting and blend uniformity. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a disputed result or an identity that the supplier's certificate does not prove. The useful panel is targeted: HPLC assay and nicotinic acid on the same sample, IR against a reference, pH and melting range, loss on drying and residue on ignition, ICP-MS for the metals and a microbiological panel. For a suspected niacin substitution, the melting range and the IR carbonyl region are more informative than a second assay. Ask the laboratory to report its limit of quantification for nicotinic acid. A “not detected” entry without a stated limit describes the method's reach, not the lot. Chain of custody matters as well: the sample tested should be the retained sample, and the lot code should match the certificate and the pack. ## What to compare between suppliers Put six lines side by side: assay method and basis; IR reference; pH at 10%; melting range; nicotinic acid method and limit of quantification; and the contaminant and microbiological panel. Two quotations that match on assay but differ on the other five are not describing the same powder. Add lot traceability: the lot code on the certificate, the pack and the retained sample should be identical, and the certificate should name the manufacturer, not only the trader. The catalog specification sits on the niacinamide product page. The forms are compared on the grade page; the tests that separate niacinamide from niacin are on the identity page; the release workflow is on the quality page. The separation behind the assay is described in the HPLC method note, and the identification in the FTIR method note. ### 02 Niacinamide or niacin: choosing a vitamin B3 grade URL: https://nutrition.rainwoodbio.com/products/vitamins/niacinamide/grades/ Reviewed: 2026-11-18 Niacinamide and niacin are both declared as vitamin B3, but they are different molecules with different CAS numbers, solubilities, melting ranges and label names. Niacinamide (CAS 98-92-0) is the amide; it is freely soluble in water, gives a solution at pH 5.5–7.5 and does not produce the niacin flush at supplement doses. Niacin (nicotinic acid, CAS 59-67-6) is the acid; it is sparingly soluble, acidic in solution and can produce a flush. The choice is settled by the dosage form and the label, not by the assay figure. In one lineNiacinamide and niacin share a vitamin name, not a molecule; the form on the label, the solubility and the flush belong to different products. ## Why the distinction matters Vitamin B3 is a family name. The nutrient can be supplied as nicotinic acid or as nicotinamide, and the two are not interchangeable by name. In the EU, Annex II to Directive 2002/46/EC lists niacin as (a) nicotinic acid and (b) nicotinamide; in the US, the Supplement Facts line can read “Niacin (as niacinamide)”; in the UK, the retained permitted-forms list carries the same two forms. The form on the certificate, the form in the ingredient list and the form in the specification have to be the same material. The difference reaches the formula as well. Niacinamide dissolves readily and leaves the pH close to neutral, which suits a stick pack or a beverage. Niacin dissolves poorly and acidifies the solution, which can be useful in an acidic matrix and awkward in a neutral one. The two also differ in melting range by more than 100 °C, so a blend or a substitution is visible in a melting test even when the assay is inside the window. ## The two forms side by side Niacinamide and niacin · identity and physical comparison | Property | Niacinamide | Niacin | CAS number | 98-92-0 | 59-67-6 | Molecular formula | C6H6N2O | C6H5NO2 | Functional group | Carboxamide | Carboxylic acid | Molecular weight | 122.12 g/mol | 123.11 g/mol | Melting range | 128–131 °C | 236–239 °C | Water solubility | Freely soluble | Sparingly soluble, about 18 g/L at 20 °C | pH in solution | 5.5–7.5 (10%) | Acidic | Flush at supplement doses | No | Yes, for immediate-release niacin | Typical label source | Niacin (as niacinamide) | Niacin (as nicotinic acid) ## What the physical differences do Solubility is the first practical difference. Niacinamide goes into water at roughly 1 g per mL and is also soluble in ethanol, so it fits a liquid or a stick pack without a solubilising step. Niacin is sparingly soluble in cold water; a formulator who needs a clear niacin beverage has to solve that, and a salt is a different ingredient on the label with its own pH, mineral load and permitted-form question. The second difference is pH. A 10% niacinamide solution sits at 5.5–7.5, close enough to neutral for a matrix that cannot take acid. A niacin solution is acidic; that can be an advantage in an acidic drink and a problem in a gel, a protein matrix or a formula with an acid-sensitive component. The third is thermal behaviour: niacinamide melts at 128–131 °C, while niacin melts near 236–239 °C. A blend of the two usually melts over a range that belongs to neither pure material, which is why the melting test is an identity check and not only a purity check. Taste follows the chemistry. Niacin is acidic and can taste sharp; niacinamide is less acidic but has its own bitter note. Neither taste is a reason to choose one form without a trial in the finished matrix, because the flavour system, the sweetener and the dose all change what the consumer tastes. ## Which dosage form fits which A dry capsule or tablet can carry either form; the choice then turns on the label and the flush, not on the process. A stick pack or a ready-to-drink beverage is easier with niacinamide because it dissolves without an acid or a salt. A gummy or a chew is a moisture-and-heat process, and niacinamide's solubility can help uniformity, but the water activity and the pH still have to be tested. A product that is built around the niacin flush is the one case where niacin is the intended material rather than the compromise. The dosage form also decides the specification. A capsule blend needs a mesh and a bulk density that the filling machine can run; a beverage needs a solubility and a solution pH; a tablet needs a compression behaviour that the niacinamide crystal may not have on its own. The catalog for this product is therefore short: one crystalline powder, with a milled or granulated option on request. The form choice, not a grade ladder, is the real decision. ## Writing the grade into the specification A niacinamide specification names the molecule and the form: “Niacinamide, crystalline; CAS 98-92-0; assay 99.0–101.0% by HPLC on the dried basis.” It then adds the identity lines (IR conforms; pH 5.5–7.5 at 10%; melting 128–131 °C), the water and inorganic lines (loss on drying ≤0.5%; residue on ignition ≤0.1%), the impurity line (nicotinic acid ≤10 ppm), the metal and microbiological panel, and the mesh. A specification that says only “vitamin B3 99%” has left the form open, and the form is the part that changes the label. A niacin specification cannot be copied from a niacinamide one. The assay method, the identity tests and the impurity panel are different, and the melting range is a different number. If a supplier offers one certificate that is said to cover both forms, ask which form was actually tested and which reference standard was used. The FTIR method note explains the amide and acid spectra behind that question. ## When niacinamide is the wrong choice Niacinamide is the wrong choice when the product proposition is the niacin flush itself. It is also wrong when the label or the brand owner insists on the word “niacin” without a form and the customer expects the acid; the ingredient declaration and the consumer expectation have to be resolved before the order. It is wrong when the formula needs an acidic ingredient and the form is being chosen for that acidity. And it is wrong when a low-assay powder is offered as niacinamide without an IR identity, a pH and a melting range: those three lines are what separate the amide from the acid. The niacinamide hub carries the catalog specification; the niacinamide versus niacin page takes the flush and label question further; the COA page shows where the identity lines sit; the compliance page covers the permitted-form and label rules. ### 03 Niacinamide is stable dry; moisture and the matrix decide the rest URL: https://nutrition.rainwoodbio.com/products/vitamins/niacinamide/stability/ Reviewed: 2026-11-18 Crystalline niacinamide is stable in a sealed, dry pack. The amide bond is the weak point: water, heat and a pH far from neutral drive hydrolysis to nicotinic acid, and the released acid is the impurity the certificate limits at 10 ppm. In a finished product, moisture pickup, an acidic or alkaline matrix, a warm hold, and the pack barrier decide how much of the shelf life the powder actually gets. The catalog release gates are loss on drying ≤0.5% and nicotinic acid ≤10 ppm; the shelf life is assigned from data on the market pack. In one lineThe crystal survives the warehouse; water, heat and a hostile matrix convert the amide to nicotinic acid, and the pack decides how fast. ## The dry solid The dry crystal is the robust form. Niacinamide is freely soluble in water and picks up moisture in handling: an open pouch in a humid dose room picks up water at the surface, the powder cakes, and the loss-on-drying limit can be crossed before the assay moves. The 1 kg foil pouch and the 25 kg fiber drum with a food-grade liner are the barriers; a desiccant in the pouch and a closed liner in the drum are part of the pack, not an extra. Caking is a physical failure with a chemical consequence. A lump that has absorbed water is a site for hydrolysis, and a blender that has to break the lump applies heat and shear to the powder. Store the pack closed, at a controlled temperature and humidity, away from strong odours and direct light, and do not return a weighed-out remainder to the original lot without a new test. The MOQ page describes the standard packs and the labels they carry. ## The amide in water In solution, niacinamide hydrolyses to nicotinic acid. The reaction is catalysed by acid and by alkali and accelerated by heat; a neutral pH and a low thermal load are the two levers. The 10% solution pH window of 5.5–7.5 is an identity specification, not a formulation target, but it is a useful warning: a solution that drifts to the acid side can be a sign of the reaction that produces nicotinic acid. A beverage or a liquid supplement should be tested at its own pH, not at the pH of a 10% laboratory solution. A process that heats the liquid — pasteurisation, hot fill, a long hold at an elevated temperature — needs a stability arm that measures nicotinic acid before and after the step. The assay can stay inside 99.0–101.0% while the nicotinic acid figure rises; the impurity is the more sensitive marker. If the process cannot avoid a high thermal load, a dry format is the lower-risk choice. ## What moves the rate Factors that move niacinamide degradation and what controls them | Factor | Effect | Control | Water activity and moisture | Hydrolysis and caking | Sealed pack, desiccant, controlled dose room | pH | Acid and alkali catalyse hydrolysis | Measure the finished formula; keep near neutral where possible | Heat | Accelerates hydrolysis and colour change | Add late, cool before filling, validate the thermal step | Reducing sugars | Colour change in a warm, wet matrix | Compatibility trial; barrier pack; sensory check | Metal ions | Colour change | Control iron and copper; check the metal panel | Light | Small for the crystal, larger for solutions | Opaque or amber pack for liquids | Time | Accumulates hydrolysis | Assign shelf life from data The table is a ranking, not a set of independent switches. A warm, wet matrix with an acidic ingredient can move faster than any one row suggests, and a dry blend in a foil pouch can be limited by the pouch rather than by the molecule. The trial has to use the real matrix and the real pack. ## A stability protocol A defensible study borrows the ICH Q1A(R2) design: long-term storage at 25 °C/60% RH or 30 °C/65% RH, an accelerated arm at 40 °C/75% RH for six months, and an intermediate condition where the long-term condition is 30 °C. Test at 0, 3, 6, 9, 12, 18, 24 and 36 months, or at the points the intended shelf life supports. The panel should include assay, loss on drying, appearance, pH where the product is a solution, nicotinic acid, microbiology and pack integrity. Run at least the 1 kg pouch and the 25 kg drum if both will be sold, and add an open-pack arm to measure moisture pickup after the first use. A finished-formula arm is not optional for a stick pack or a beverage: the matrix can change the pH and the water activity, and the ingredient data alone will not predict the product. Use the batch COA as the time-zero result and trend the change rather than judging each point as pass or fail. ## The finished formula In a capsule or tablet, the dry blend is the easy case: keep the excipients dry, avoid a hygroscopic ingredient next to the niacinamide, and control the dose-room humidity. In a stick pack, the foil laminate is the barrier, and the fill weight and the headspace decide how much moisture the powder sees. In a beverage, pH, heat and light are the drivers; a neutral pH and a cool fill are the conservative design. In a gummy or a chew, water activity and the cook step matter more than the assay, and the colour and taste panel will show a problem before the HPLC does. Acidic ingredients deserve a specific check. A dry acid in a capsule is not the same as an acid in a wet matrix: the dry blend has little free water, while a solution or a gel gives the acid a medium to catalyse hydrolysis. If the formula contains an acid and water, test the combination rather than each ingredient alone. The COA page explains the nicotinic acid line; the HPLC method note covers the separation. ## Assigning a shelf life Shelf life belongs to a pack and a storage condition, and it ends at a defined set of limits. It should name all three: the pouch or drum, the maximum temperature and humidity, and the assay, moisture, nicotinic acid, appearance and microbiological limits the product must still meet. Real-time data on the market pack are the primary evidence; accelerated data support the design but do not replace the real-time arm for a claim that will be printed on a label. Do not extend a shelf life because the assay still passes. Nicotinic acid can climb while the assay stays inside the window, and a colour or caking failure can precede both. The batch COA releases a lot; it does not assign a shelf life. Where the pack or the formula has not been studied, the defensible answer is a shorter period or a new study, not a number borrowed from another product. The catalog specification is on the niacinamide hub; the release tests are on the COA page; the pack options are on the MOQ page; the release and retest workflow is on the quality page. ### 04 Niacinamide: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/vitamins/niacinamide/moq/ Reviewed: 2026-11-18 Niacinamide ships from a 1 kg minimum: one foil pouch, or a 25 kg fiber drum for larger runs, with a 1–7 day lead time once the order is defined. That kilogram is cut from a released lot and carries the lot's COA, which makes it the first traced unit a buyer can qualify. The quotation is built from six inputs, and the order confirmation repeats them. In one lineThe kilogram is the smallest traced unit of a released lot; everything above it is the same material in a larger pack. ## Why the minimum is 1 kg Traceability sets the floor. Manufacturers release material in lots, and a lot is the smallest quantity that has a single test record, a single certificate and a retained sample. Filling a 1 kg pouch from that lot keeps the chain intact; filling a jar from a bench bin does not. A buyer who needs a smaller trial is requesting a sample, not a commercial pack. One kilogram also covers the work that comes before a drum: a bench batch, a pilot, and usually a stability arm, all from the same lot number. If the trial succeeds, the specification moves to the 25 kg pack; if it fails, the buyer has spent a kilogram rather than a pallet. The lot number is the thread: it should appear on the pouch, the certificate and the retained sample, and it should not be mixed with a second lot in the same bin. ## Packaging Niacinamide packs and what each one protects | Pack | Where it fits | What to specify | 1 kg foil pouch | Bench, pilot and small production | Foil laminate, sealed seam, desiccant where required | 25 kg fiber drum | Bulk production | Food-grade liner, closed lid, palletised A pack is a barrier, and the barrier is part of the purchase. Niacinamide takes up moisture, so the drum needs a liner between the powder and the fiber wall, and the pouch needs a seam that survives handling. “25 kg drum” on its own says nothing about either. The pack label should carry the name, the form, the lot, the net mass and the storage condition; without the lot, the pack cannot be tied to the certificate. ## Lead time The 1–7 day window starts when the order is complete, not when the first email arrives. A catalogue-grade order against the standard specification can move quickly; a different mesh, a special pack or a market-specific document set adds steps inside the window. Release testing and document preparation are part of the lead time, not work that starts after it. Tell the supplier the date the material is needed for. The lead time is a range, and the dispatch date is fixed only when the order confirmation is issued. A dated production run should be flagged at enquiry, because a dispatch date that is agreed late can move the whole schedule. The lead-time note explains how the window is counted. ## What a quotation needs Six inputs make a quotation specific: - The material: niacinamide, with the form and the CAS number, not the family name “vitamin B3.” - The amount and the pack: how many kilograms, and whether the pouch or the drum. - The delivery market and address, since the documents and the route depend on both. - The release specification, including any limit tighter than the catalogue on nicotinic acid, water or metals. - The document set: COA, TDS, SDS, allergen and origin statements, or an outside certificate. - The required date, and whether a sample has to be approved before the bulk order. An enquiry with only a name and a number will come back with questions, and each round adds time. The six inputs are the same ones the order confirmation will list. ## Samples A sample should be drawn from a released lot and should carry that lot's certificate. It is not a bench batch, and it should not come from a different lot than the one that will ship. Check the sample label against the COA before the trial; if the numbers differ, the trial says nothing about the drum behind it. Store the sample as the label says and keep enough to repeat the test if a result is challenged. A retained sample is only a reference if it has been kept under the same conditions as the bulk. The retained-sample note lists what the record should include. ## Where the terms stop An order should fix five points: the specification and method for each parameter, the assay tolerance, the pack and label, the documents released with the lot, and the route for a result outside the limit. It should also name the market the documents are written for; a COA prepared for one destination may omit a declaration another destination requires. The order does not replace the specification. “Niacinamide, food grade” leaves the form, the method and the impurity limits open, and those are the parts that decide whether the material fits the label. The technical document and the commercial document have to describe the same powder. The batch certificate is described on the COA page. The form options are on the grade page, the pack and storage conditions are on the stability page, and the glossary defines MOQ and lead time. The catalogue entry is the niacinamide hub. ### 05 Where niacinamide is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/vitamins/niacinamide/compliance/ Reviewed: 2026-11-18 Niacinamide is a permitted niacin form for food supplements in the European Union and the United Kingdom, and a dietary ingredient in the United States. Permission attaches to the form and the category, not to the words “vitamin B3.” The file has to show the form on the label, the contaminant results against the destination limits, the nutrient declaration in the required unit, and claims that stay inside the authorised wording. Each market uses a different instrument, and the label is checked separately. In one linePermission attaches to nicotinamide as a listed niacin form; the contaminant result, the label and the claim are three separate files. ## The four checks The first check is the permitted identity: which substance, in which form, is allowed in the product category. The second is the contaminant limit, set on the product as sold. The third is the label: the ingredient has to be named in the form the market expects, and the niacin content has to be declared in the required unit. The fourth is the claim: it has its own authorisation and its own evidence. The EU maintains a permitted-forms list and a separate contaminants regulation. The US regulates niacinamide as a dietary ingredient under DSHEA and sets the Supplement Facts panel by regulation. The UK applies retained lists, a UK nutrition reference value and the GB claims register. This page describes the framework as of this review (November 2026); the current text in each market decides. ## European Union Directive 2002/46/EC lists the vitamin and mineral substances that may be used in food supplements. Annex II lists niacin as (a) nicotinic acid and (b) nicotinamide, so niacinamide is a permitted form. The form on the label and on the certificate has to match; a label that says only “niacin” leaves the reader to guess which one is present. For supplements, contaminant limits sit in Regulation (EU) 2023/915. At the point of sale, a supplement must stay within 3.0 mg/kg lead, 1.0 mg/kg cadmium and 0.10 mg/kg mercury. Arsenic is not harmonised at EU level, so a Member State may apply its own limit; set one in the specification and check the destination. National maximum levels differ, so compliance in one Member State does not travel across the Union. Labelling follows Regulation (EU) No 1169/2011 and the supplement particulars in Directive 2002/46/EC. The label carries the word “food supplement,” the name of the vitamin, the amount per portion, the percentage of the nutrient reference value, a warning not to exceed the stated daily dose, a keep-out-of-reach warning and a statement that the product is not a substitute for a varied diet. The EU nutrient reference value for niacin is 16 mg NE, so the percentage is calculated against that figure. ## United States Niacinamide is used as a dietary ingredient under DSHEA. The file should state the ingredient basis — pre-1994 marketing, a GRAS conclusion or a new dietary ingredient notification — and hold the evidence. 21 CFR 101.36 sets the Supplement Facts layout. It declares niacin in milligrams of niacin equivalents and the percentage of the 16 mg NE Daily Value for adults and children four years and older. The source line names the form, for example “Niacin (as niacinamide),” and that name has to match the certificate. The cGMP rule in 21 CFR 111 requires identity testing of each component, so the buyer's own test on receipt is part of the file. US federal law sets no lead maximum for dietary supplements. California's Proposition 65 sets exposure thresholds that many US buyers work to; the daily dose has to be modelled against them, and a mg/kg figure alone does not answer the question. Structure/function claims carry the DSHEA disclaimer and the 30-day FDA notification, and a disease claim is not available in this category. ## The contaminant table Lead, cadmium, mercury and arsenic · food supplements, by market | Element | EU | US | UK | Lead (Pb) | 3.0 mg/kg | No federal maximum; state rules such as Prop 65 may apply | 3.0 mg/kg retained; check current law | Cadmium (Cd) | 1.0 mg/kg | No federal maximum specific to supplements | 1.0 mg/kg retained; check current law | Mercury (Hg) | 0.10 mg/kg | No federal maximum specific to supplements | 0.10 mg/kg retained; check current law | Arsenic (As) | Not harmonised; Member State rules may apply | No federal maximum specific to supplements | No harmonised limit; set in the specification The ingredient specification in this catalog carries its own limits: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg on the powder. Those are material limits, not the product limit. The product limit applies to the supplement as sold, after dilution by excipients and division into doses; the two have to be checked together. The 2 mg/kg arsenic line is buyer-set, because the EU has no harmonised figure. ## Labels and claims Permission to use the ingredient is not permission to make a claim. In the EU, health claims are authorised by Regulation (EC) No 1924/2006 and listed in Regulation (EU) No 432/2012; only the authorised wording may be used. In the US, a structure/function statement is the brand's responsibility, must be substantiated, and carries the DSHEA disclaimer. In the UK, the GB register of nutrition and health claims lists the wording that may be used. A disease claim is not available in any of the three markets. This site makes no health claim for niacinamide. It publishes the specification, methods and framework; the claim, if any, belongs to the brand and the market that authorises it. The form name is an ingredient declaration, not a claim. ## The document pack - Batch COA with assay, IR identification, pH, melting range, loss on drying, residue on ignition, nicotinic acid, metals and microbiology. - Specification and technical data sheet naming the form, the CAS number and the assay basis. - Safety data sheet with the 16 standard sections. - Contaminant report against the destination limits, with an arsenic limit where one is set. - Nutrition declaration worksheet showing the niacin contribution per portion and the % NRV or % DV. - Label artwork with the supplement particulars, the form and the warning statements. - Claim file showing the authorised wording or the structure/function substantiation. - Allergen, GMO, origin and residual-solvent statements for the lot. ## What to check before the first order - Is nicotinamide on the permitted list for the destination market, in the product category? - Do the contaminant results cover the destination limit at the daily dose, and is the product limit checked too? - Does the label name the form and declare niacin in mg NE and % NRV or % DV? - Is every claim authorised, or is it a structure/function statement with the disclaimer and notification? - Is the document pack written for the destination market? - For the UK, is the product for Great Britain or Northern Ireland, and which list applies? The market notes expand the framework: EU regulatory notes, US regulatory notes and UK regulatory notes. The definitions of NRV and Daily Value are in the glossary, the permitted-form listing is explained in the Annex II note, the batch certificate is on the COA page, and the release workflow is on the quality page. The product itself is on the niacinamide hub. ### 06 How we prove a niacinamide lot is niacinamide URL: https://nutrition.rainwoodbio.com/products/vitamins/niacinamide/identity/ Reviewed: 2026-11-18 Identity for niacinamide is four answers, not one assay: the document (name, CAS number and lot on the certificate); the IR spectrum, which shows the amide and pyridine functional groups against a reference; the HPLC result, which gives the assay and separates nicotinic acid; and the physical set of pH 5.5–7.5 at 10%, melting 128–131 °C, loss on drying ≤0.5% and residue on ignition ≤0.1%. A certificate that reports only the assay has answered the third question and left the other three open. In one lineA 99% assay says the peak is there; the IR, the melting range and the nicotinic acid figure say the peak is niacinamide. ## The four layers Identity layers · what each test proves and misses | Layer | Test | What it proves | What it misses | Document | Name, CAS, lot and COA | The chain from pack to paper | Whether the powder is the named material | Spectroscopic | IR against a reference; UV maximum near 261 nm | The amide and pyridine functional groups | The amount present; trace impurities | Chromatographic | HPLC assay and nicotinic acid | The amount and the hydrolysis impurity | The functional groups; a co-eluting unknown | Physical | pH, melting, LOD, ROI | The solid's behaviour and the water/inorganic load | Specific identity on its own The document layer is necessary but not sufficient. A certificate can be correct and still belong to a different drum, so the lot code on the certificate, the pack and the retained sample has to match. The spectroscopic layer is the most direct evidence of the molecule: IR shows the amide carbonyl and the pyridine ring, and the comparison is against a reference spectrum. The chromatographic layer is the most direct evidence of amount and impurity. The physical layer catches substitutions the first three can miss. ## The assay ratio and the impurity ratio An HPLC assay is a ratio: the response of the sample peak divided by the response of a reference standard of known purity, corrected for the sample weight and the dilution. The result is only as good as the standard, the integration and the basis. A figure calculated on the dried substance and a figure calculated as-is are not the same number, and a 99.0–101.0% window includes method uncertainty. A result of 100.4% is not a material that is 100.4% pure; it is a comparison that sits slightly above the standard's assigned value. The impurity ratio is separate. Nicotinic acid is measured against a standard or by area normalisation, and the certificate should say which; the 10 ppm limit is close enough to the practical floor of HPLC-UV that the method's limit of quantification has to be stated. A certificate that says “nicotinic acid: not detected” without naming the limit has told you about the method, not the lot. The same logic applies to the difference between the assay and 100%: that difference is not all impurity, and it is not a purity statement. ## What X-ray diffraction adds X-ray diffraction identifies a crystalline phase from its diffraction pattern. For niacinamide it confirms that the solid is crystalline, and it can show a second crystalline phase such as niacin. It is not a trace method: a 10 ppm nicotinic acid limit is an HPLC question, not an XRD question. If a supplier claims a specific crystal form, ask for the pattern and the reference; if the claim is only “crystalline powder,” the IR, the melting range and the assay are the routine evidence. XRD is most useful when the solid form matters to the process — compaction, dissolution or blend behaviour — or when a spectroscopic identity check is disputed. It does not replace the assay, the impurity method or the pH and melting tests. A laboratory report should state the detection limit for the second phase, because a “not detected” line without a limit is not evidence about the sample. ## Three ways a lot stops being niacinamide The first route is niacin. Nicotinic acid is the acid analogue, it is UV-active, and a blend can be tuned to an assay window. The tells are a pH below the 5.5–7.5 window, a melting range that is low and broad or shows a second melt near 236–239 °C, and an IR spectrum with a carboxylic acid carbonyl rather than an amide. The second route is a nicotinate salt, such as sodium nicotinate. The pH moves alkaline, the residue on ignition rises, and the label may not name the salt. The third route is dilution: dextrose, lactose, maltodextrin, starch or an inorganic carrier. The assay falls, the loss on drying or the residue on ignition rises, and the IR shows bands that do not belong to niacinamide. Substitution routes and the tests that show them | Route | What moves | Test that shows it | Niacin substitution | pH down; melting low or broad; IR acid carbonyl | pH, melting, IR, HPLC | Nicotinate salt | pH up; residue on ignition up | pH, ROI, metal panel | Dilution | Assay down; LOD or ROI up; extra IR bands | Assay, LOD, ROI, IR A fourth problem is not a substitution but a documentation failure: a relabelled lot. The powder can be correct and the certificate can belong to another batch. The lot code on the pack, the certificate and the retained sample is the only defence, and it is the first thing to check when a result is disputed. ## How to write the specification - “Niacinamide, crystalline; CAS 98-92-0; assay 99.0–101.0% by HPLC, calculated on the dried substance.” - “Identification: IR conforms to the reference spectrum.” - “pH 5.5–7.5 on a 10% solution.” - “Melting range 128–131 °C.” - “Loss on drying ≤0.5%; residue on ignition ≤0.1%.” - “Nicotinic acid ≤10 ppm by HPLC, with the limit of quantification stated.” - “Heavy metals Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg; microbiology APC ≤1,000 cfu/g, yeast and mould ≤100 cfu/g, E. coli and Salmonella absent.” The list is longer than an assay line because identity is not one measurement. A specification that names the IR, the pH, the melting range and the nicotinic acid limit gives a laboratory something to reject against; a specification that names only the assay leaves the other three layers to the supplier's judgement. ## Five questions for a supplier - Which IR reference and library did the identification use, and can you send the spectrum for this lot? - What is the HPLC method for the assay and for nicotinic acid, and what is the limit of quantification at the 10 ppm limit? - What are the pH and melting range on this lot, and at what concentration and heating rate were they measured? - Is the assay calculated on the dried substance or as-is, and what are the loss on drying and residue on ignition? - Is the material 100% niacinamide, or is it blended with niacin, a nicotinate salt or a carrier? If it is a blend, what is the composition? The niacinamide hub carries the catalog specification; the COA page shows where these figures sit; the grade page compares the two vitamin B3 forms; the FTIR method note and the HPLC method note explain the two central tests. The quality page covers the release workflow. ### 02.1 Niacinamide vs niacin: why the flush is a different product URL: https://nutrition.rainwoodbio.com/products/vitamins/niacinamide/grades/niacinamide-vs-niacin/ Reviewed: 2026-11-18 Niacinamide and niacin are both declared as vitamin B3, but they are different molecules: the amide and the carboxylic acid. The difference that reaches the consumer is the flush. Immediate-release niacin can produce a prostaglandin-mediated vasodilation at supplement doses, while niacinamide does not carry the acid group that triggers that response. That makes them different label ingredients, different formulation choices and different products, not two names for one powder. In one lineThe flush is not a side note to the niacin decision; it is the reason niacinamide and niacin are separate label ingredients. ## One vitamin name, two molecules Niacinamide is pyridine-3-carboxamide, CAS 98-92-0, formula C6H6N2O. Niacin is pyridine-3-carboxylic acid, CAS 59-67-6, formula C6H5NO2. The difference is the group at the 3-position: an amide in one, a carboxylic acid in the other. That single functional-group change moves the melting range from 128–131 °C to 236–239 °C, changes the water solubility from freely soluble to about 18 g/L at 20 °C, and changes the pH of a solution from close to neutral to acidic. Niacinamide and niacin · chemistry and handling | Feature | Niacinamide | Niacin | CAS number | 98-92-0 | 59-67-6 | Molecular formula | C6H6N2O | C6H5NO2 | Functional group | Carboxamide | Carboxylic acid | Molecular weight | 122.12 g/mol | 123.11 g/mol | Melting range | 128–131 °C | 236–239 °C | Water solubility | Freely soluble | About 18 g/L at 20 °C | pH in solution | 5.5–7.5 (10%) | Acidic | Flush at supplement doses | No | Yes, immediate-release The two are not different grades of one material. They are different chemical substances with different CAS numbers, different specifications and different label names. A certificate that says “niacin” or “vitamin B3” without naming the form is not a specification for either one. ## What the flush is Immediate-release niacin activates the GPR109A receptor, also called HCAR2, and the response releases prostaglandin D2, which dilates the small vessels and produces the warmth, redness and tingling that consumers call the flush. It usually begins within about half an hour and fades over roughly an hour, and it is dose-dependent. It is a receptor-mediated response to the acid, not an impurity, an allergy or a sign that the material is off-specification. Niacinamide lacks the carboxylic acid group that the receptor recognises, and at supplement doses it does not produce the same flush. That is the practical reason the two forms are separate products: a brand that wants a flush-free experience chooses niacinamide, and a brand that builds its proposition around the flush chooses niacin and labels it as niacin. The flush is a formulation and label fact on this page, not a benefit claim. ## Content, dose and niacin equivalents Both forms count toward the niacin equivalent, but they are not interchangeable by mass in a formula. The label declares niacin and names the form; a switch from one to the other changes the ingredient declaration and the formula mass even when the vitamin figure is unchanged. The molecular weights are close — 122.12 for niacinamide and 123.11 for niacin — but the handling, the solubility and the pH are not. The safety evaluation assesses the forms differently as well. The EU Scientific Committee on Food set tolerable upper intake levels for supplemental intake of 10 mg/day for nicotinic acid and 900 mg/day for nicotinamide. Those are risk-assessment values, not harmonised maximum levels in the EU, and they do not make one form a substitute for the other on a label. They are a signal that the two materials have different dose conversations. ## What the label and the file must say In the EU, Annex II to Directive 2002/46/EC lists niacin as (a) nicotinic acid and (b) nicotinamide, and the label declares niacin as a percentage of the 16 mg NE nutrient reference value. In the US, the Supplement Facts panel declares niacin in mg NE and the source line names the form, for example “Niacin (as niacinamide)” or “Niacin (as nicotinic acid).” In the UK, the retained permitted-forms list and the GB claims register apply. In all three, the form on the certificate, the form in the ingredient list and the form in the specification have to match. A label that says “niacin” without the form is ambiguous. It may be acceptable as the nutrient name in some layouts, but the ingredient list and the specification still have to identify the substance. If the brief says “vitamin B3” and the customer expects one form, resolve the form before the artwork is signed, not after the first batch. ## How the two are told apart HPLC separates niacinamide from nicotinic acid and gives the assay; IR shows the amide carbonyl in one and the carboxylic acid carbonyl in the other; pH separates the near-neutral amide solution from the acidic acid solution; and the melting range separates 128–131 °C from 236–239 °C. A single assay can be made to look right by blending, so the identity file needs at least two orthogonal tests, and the impurity file needs the nicotinic acid figure. The HPLC method note covers the separation, and the identity page sets out the four layers. ## When to choose which Choose niacinamide for a capsule, tablet, stick pack or beverage where the brief is a flush-free product and the formula can take a near-neutral, freely soluble powder. Choose niacin when the flush is part of the product proposition, the label names niacin as the acid, and the dose conversation is built around that form. Choose neither until the label question is settled if the brief says only “vitamin B3,” because the two forms are different ingredients with different consumer experiences. The choice is not about vitamin activity. It is about which product the label describes. A flush-free brief and a niacin label are a contradiction; a niacin brief and a niacinamide certificate are a specification error. The niacinamide hub carries the catalog specification, the grade page covers the form comparison, and the compliance page covers the permitted-form and label rules. ### 01 What the COA for phosphatidylserine actually contains URL: https://nutrition.rainwoodbio.com/products/fatty-acids/phosphatidylserine/coa/ Reviewed: 2026-11-18 A phosphatidylserine certificate reports more than a percentage. It should show PS by HPLC-ELSD against a declared standard, the phospholipid profile, loss on drying, peroxide value, acid value, heavy metals, microbiology and particle size. These are catalog limits; the batch COA is the record for a particular lot. In one lineA phosphatidylserine certificate has to report the phospholipid, the method and the oxidation state, not only a 50% figure. ## The certificate as a test report A certificate is useful when it can be audited line by line. Each parameter needs three things: what was measured, which method produced the number, and which limit the lot was released against. A parameter without a method cannot be checked by a second laboratory; a method without a limit cannot show what the lot passed. Identity, assay and lipid limits · phosphatidylserine 50% powder | Parameter | Method | Release limit | Appearance | Visual | Light yellow to yellow, free-flowing powder | Identification | HPLC-ELSD | Phospholipid profile conforms; PS peak at the expected retention time | Phosphatidylserine | HPLC-ELSD | 50.0–55.0% | Loss on drying | Gravimetric | ≤5.0% | Peroxide value | Titrimetric | ≤10 meq/kg | Acid value | Titrimetric | Reported | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh PS has no useful ultraviolet chromophore, so the assay depends on an evaporative light-scattering detector and a phospholipid standard. The certificate should name the detector, the column and the standard, and it should name the titrimetric method behind the peroxide and acid values: AOCS Cd 8b-90 or ISO 3960 for peroxide value, AOCS Cd 3d-63 or ISO 660 for acid value are the usual references, but the certificate has to state which one was used. ## What the 50% figure measures Phosphatidylserine is a class of phospholipids, not a single molecule. The 50.0–55.0% figure is the sum of the PS molecular species, quantified against a reference standard. The balance is other phospholipids — mainly phosphatidylcholine, phosphatidylethanolamine and phosphatidic acid — plus any carrier the grade is standardised on. A PS result is a composition figure, not a purity percentage in the crystalline sense. Because the detector response is not identical for every phospholipid class, calibration and integration decide the number. A laboratory that calibrates with a PS standard of declared purity, resolves PS from the neighbouring PE and PA peaks, and reports its integration parameters is giving a result another laboratory can reproduce. The result also needs a basis. PS is normally reported on the powder as sold; if a certificate reports on a dried basis, the loss-on-drying figure has to sit beside it. Read together, 50.0–55.0% PS and ≤5.0% loss on drying say how much phospholipid and how much water the powder contains, but not which other phospholipids make up the remainder. ## Release limit versus batch result The release limit is the acceptance boundary for the lot; what the laboratory measured on that lot is the batch result. Both belong on the page, in separate columns, with the method next to them. A result column filled with the specification range is a copy of the gate, not a result. Peroxide value is where the distinction is most often blurred. A lot can sit inside both limits, with the peroxide value near the ceiling, and still be a poor choice for a formula stored warm for a year. Acid value has no release ceiling, so “reported” is sometimes treated as no requirement. It is a requirement to report. Ask for the figure and the method, then decide which internal limit applies to the formula. The heavy-metal panel works the same way: individual results are more useful than a single line that says the panel passed. “Passes specification” is a conclusion the reader should reach from the numbers. If a certificate gives only the conclusion, ask for the results. ## What moves between batches The PS figure moves with the lecithin source, the enzymatic conversion and the purification. Soybean lecithin is a variable raw material: phospholipid classes and fatty acids shift with origin and crop, and the conversion does not reach the same yield on every input. A change of lecithin supplier can move PS and the residual PC and PE figures together. Peroxide value moves with heat, oxygen and time. Drying, milling and storage all add exposure, and a lot that left the reactor clean can arrive with a higher value if the pack is not a barrier. Loss on drying moves with the drying step and with humidity during packing; acid value follows moisture and heat; particle size moves with the mill and sieve. Colour is less quantitative and often more revealing. A darker, brownish tint or an odour change can point to oxidation or thermal exposure while the PS assay still passes; read it as a reason to look at the peroxide and acid values. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, an allergen claim the certificate does not support, or a disputed result. The useful panel is not a full repeat. It is the set of tests that answer what the certificate leaves open: HPLC-ELSD with a certified PS standard and a full phospholipid profile; peroxide and acid values by a named method; fatty acids by GC for the source; sterols where substitution is suspected; soy protein by ELISA where a soy declaration is at issue; and ICP-MS for the heavy metals. Ask the laboratory to report its limit of quantification and to attach the chromatogram. A “not detected” line without a limit is evidence about the method's sensitivity, not about the sample. The PS assay report should name the column, detector settings, standard lot and integration, not only the percentage. ## What to compare between suppliers Put six lines side by side. Two quotations that match on PS but diverge on the other five are not describing the same powder. Six lines that decide whether two PS quotations describe the same material | Line | What to ask for | What it separates | Source | Soy or sunflower, lecithin supplier, origin | Two materials with the same assay and a different label | PS result | Lot result, HPLC-ELSD method, standard | A measured lot from a copied specification | Profile | PC, PE, PI, PA and LPC alongside PS | A PS concentrate from diluted lecithin | Oxidation | Peroxide value and acid value, with methods | A fresh lipid from an aged one | Moisture | Loss on drying on the same lot | A stable powder from a hygroscopic one | Allergen | Source statement and soy protein data | A soy-free claim from a soy-derived lot The second layer is lot traceability. The lot code should be identical on the certificate, the pack and the retained sample, and the certificate should name the manufacturer and the lecithin source. The catalog specification sits on the phosphatidylserine product page. The concentration options are compared on the grade page; the tests that separate PS from lecithin are on the identity page. The detector and separation are described in the HPLC method note, and the certificate terms in the COA glossary entry. ### 02 20%, 50% or 70%: choosing a phosphatidylserine grade URL: https://nutrition.rainwoodbio.com/products/fatty-acids/phosphatidylserine/grades/ Reviewed: 2026-11-18 The PS percentage decides how much powder carries a label dose; the source and the carrier decide the allergen declaration, the flow and the regulatory route. The catalog grade is a soy-derived 50% powder at 80 mesh, with 20% and 70% quoted on request. Switching grade changes the dose weight, the capsule size and the specification lines — not only the number in the product name. In one lineThe grade decides how much powder carries the label dose, and the source decides the allergen and the regulatory route. ## Why there is more than one grade Phosphatidylserine is concentrated from lecithin, and the concentration step can stop at different PS levels. A 20% powder carries more non-PS solids per gram; a 50% powder is the middle of the commercial range and the grade this catalog lists; a 70% powder carries less material per gram of PS. Each is a different powder with a different mass balance. Source is a second axis. Soy and sunflower PS can be produced at the same PS content and still differ in fatty acid profile, allergen declaration and regulatory route. Grade and source are often quoted together — “soy-derived 50% powder” — because a change in either one changes the product. The soy versus sunflower page covers the source decision; this page covers the concentration. ## 20%, 50% and 70% side by side What changes across phosphatidylserine grades | Line | 20% grade | 50% grade (catalog) | 70% grade | PS content | 20% nominal; range agreed in the specification | 50.0–55.0% by HPLC-ELSD | 70% nominal; range agreed in the specification | Powder per 100 mg PS | 500 mg | 200 mg | 143 mg | Balance of the powder | More non-PS solids | Other phospholipids plus any declared carrier | Fewer non-PS solids | Typical format | Sticks, drink mixes, blends | Capsules, tablets, sticks | Capsules, compact sticks | Flow and bulk | Usually freer-flowing | Confirm bulk density and flow | More cohesive; confirm flow | Specification | Written for the grade | Written for the grade | Written for the grade The arithmetic is the first thing to check. A formula that declares 100 mg PS per capsule needs 500 mg of a 20% powder, 200 mg of a 50% powder or about 143 mg of a 70% powder. At 300 mg PS the weights become 1,500 mg, 600 mg and 429 mg. The 20% grade may not fit a small capsule at all, while the 70% grade may leave little room for other actives in a fixed-weight stick. The second check is the label. The carrier and the other phospholipids are ingredients and have to be declared. A grade with more carrier per gram of PS puts more of that carrier into every dose. If the label claim is built around powder weight rather than PS weight, a grade change can move the declared PS without changing the capsule weight. The third check is oxidation. Peroxide value is measured on the powder, so the result belongs to the grade and the lot, not to the PS molecule alone. A 20% grade carries more powder per milligram of PS; a 70% grade carries less. When comparing certificates, compare the peroxide value per gram of PS as well as per kilogram of powder, and ask for the value on the lot you will receive. ## What the powder does on the line Particle size is specified as at least 95% through 80 mesh, and that line travels with the grade. A finer cut disperses faster and dusts more; a coarser cut flows better but can settle in a stick. Granulation is available on request and changes the flow, the bulk density and the dispersion, so a granulated grade needs its own specification rather than a note on the milled one. Higher PS content means a higher phospholipid fraction, and phospholipids are cohesive and hygroscopic. A 70% powder can cake faster than a 20% powder in an open room and can be harder to empty from a hopper. A 20% powder on a free-flowing carrier can be denser and easier to handle but adds mass to every dose. Ask for bulk density, flow and loss on drying on the grade you are buying. PS is dispersible in water, not soluble. In a stick or drink mix it clouds the liquid, so a clear beverage is not the right format for any grade. In a capsule or tablet the powder is shielded from water, and the grade question becomes fill weight and flow. ## Matching the grade to the dosage form Capsules and tablets usually take the 50% grade because 200 mg of powder for a 100 mg PS claim fits a size 1 or 0 capsule, with room for a flow agent. A 70% grade can shrink the capsule further or leave room for a second active; a 20% grade may need two capsules and is usually a poor fit for a compact dose form. Sticks and drink mixes can take the 20% grade when powder weight is not the constraint. The 50% grade is also workable if the stick weight allows 200 mg per 100 mg PS. Gummies and chews are limited by water activity and heat rather than by grade alone; the powder has to be added where the matrix is cool enough, and its flow and particle size affect dispersion. Add an overage only with data. PS is not a crystalline material that sits unchanged in a finished product; heat, moisture and oxygen move the assay and the peroxide value. The overage belongs in the formula specification and the stability study, not in a rule of thumb copied from another ingredient. ## How to write a grade specification Write the grade as a full identity: “Phosphatidylserine 50% powder, soy-derived, 50.0–55.0% by HPLC-ELSD, ≥95% through 80 mesh, loss on drying ≤5.0%, peroxide value ≤10 meq/kg, acid value reported, heavy metals and microbiology as listed, carrier declared if present, source and allergen statement attached.” A 20% or 70% grade gets its own PS range, mesh and peroxide limit where the process supports one; do not copy the 50% limits across. Name the method and the standard, not only the percentage. The PS result depends on the HPLC-ELSD calibration and on the integration of the phospholipid peaks, so “50% by HPLC” without the detector and standard is not comparable with another supplier's. The COA page sets out the lines a certificate carries; the identity page explains why the profile matters as much as the assay. Ask for the certificate on the exact grade and lot. A 50% certificate does not describe a 70% powder. ## When a different grade is the wrong answer If the formula needs a clear solution, no PS grade will deliver it; the ingredient is a dispersed lipid. If the label needs a soy-free claim, changing the percentage does not help — the source has to change, and the regulatory route has to be rechecked. If the capsule is already at its fill limit, a lower grade makes the problem worse. The catalog specification, pack sizes and MOQ are on the phosphatidylserine product page. Oxidation is covered on the stability page, the ordering unit on the MOQ page, and mesh size in the particle-size glossary entry. ### 03 Phosphatidylserine is a lipid; oxidation and moisture decide the shelf life URL: https://nutrition.rainwoodbio.com/products/fatty-acids/phosphatidylserine/stability/ Reviewed: 2026-11-18 Phosphatidylserine is a phospholipid with unsaturated fatty acids, so its shelf life is a contest between oxidation and moisture rather than a fixed number of months. Peroxide value is the earliest signal; the PS assay can stay inside its range while the lipid deteriorates. The catalog limits are peroxide value ≤10 meq/kg and loss on drying ≤5.0%, and a shelf life has to be demonstrated on the grade and the pack. In one lineThe PS assay can hold while the peroxide value climbs, so shelf life is set by the lipid's oxidation and moisture, not by the assay alone. ## The dry powder Sealed in a foil pouch or a lined drum at a cool temperature, the powder is stable enough for commercial handling. The weak point is the seal. PS is hygroscopic, and once the liner is opened the room enters the pack: loss on drying rises, particles stick together and the free-flowing powder becomes a caked mass. Moisture also drives hydrolysis, which raises the acid value and releases free fatty acids. Caking and flow are the visible effects; colour and odour are the chemical ones. A light yellow powder that turns darker or develops an off-note is showing oxidation that the PS assay may not reflect. Store the pack closed, away from light and heat, and bring it to room temperature before opening so condensation does not form on the powder. A desiccant is useful in humid climates; it is not a substitute for a sealed liner. Temperature matters even in a closed pack. Reaction rates roughly double for every 10 °C, so a drum stored near a warm wall can age faster than the same drum in a cool store. The storage condition belongs in the specification and on the label, not only in the warehouse procedure. ## In dispersion and in the formula PS is dispersible in water, not soluble. In a stick or a drink mix it clouds the liquid, and in a beverage it will settle unless the formula is designed to keep it suspended. That is a formulation fact, not a defect: a clear drink is the wrong format for a phospholipid powder. In a wet matrix the lipid is exposed to water, oxygen and often heat. High-shear mixing can whip air into the dispersion and raise the peroxide value; a nitrogen blanket or a deaerated process reduces that exposure. Metal ions, particularly iron and copper, catalyse lipid oxidation at trace levels, so the water and the other ingredients should be checked as well as the PS powder. An acidic or alkaline pH accelerates hydrolysis of the phospholipid; a neutral, cool, low-water-activity matrix is the easier environment. Antioxidants can slow the change but do not reverse it. Mixed tocopherols or ascorbyl palmitate are common choices in lipid formulas; the antioxidant has to be declared, and it has to be shown to work in the real matrix rather than assumed from another product. Adding an antioxidant to an already oxidised lot does not restore the peroxide value. ## What actually moves the result Stability factors · phosphatidylserine powder | Factor | Effect | Control | Oxygen | Peroxide value rises; off-notes develop | Sealed pack, nitrogen headspace, low-shear handling | Moisture | Caking, hydrolysis, acid value rises | Foil laminate, sealed liner, desiccant, dry room | Heat | Faster oxidation and hydrolysis | Cool store, cool process, short heat exposure | Light | Photo-oxidation, colour drift | Opaque pack, amber or foil secondary | Iron and copper | Trace-metal catalysis | Specification limits, equipment check, ingredient screen | pH and water activity | Hydrolysis in wet formulas | Neutral pH, low water activity, trial the matrix | Time | Slow change even in a good pack | Real-time data, retest or expiry date ## The stability protocol The bulk study keeps the powder in its commercial pack at 25 °C/60% RH and at 40 °C/75% RH, with pulls at the start and then at 3, 6, 12 and 24 months. The warm leg is an accelerated condition, not a storage instruction; it exists to make a trend appear inside the study window. Test PS by HPLC-ELSD, peroxide value, acid value, loss on drying, appearance and microbiology at each pull, and add the phospholipid profile where the method allows it. Peroxide value is the early indicator, but read it with care. Hydroperoxides are intermediate products: they rise, then decompose into aldehydes and other secondary products, so a peroxide value that falls late in the study can mean the lipid has moved past the hydroperoxide stage rather than recovered. Acid value, colour, odour and, where available, an anisidine value tell the rest of the story. A specification that tracks only PS and PV can miss the secondary change. The finished-product study runs alongside, not instead. The capsule, tablet, stick or gummy goes into its own pack at 30 °C/65% RH and 40 °C/75% RH and is tested for PS, peroxide value, moisture, colour and taste where it applies. Bulk powder can pass while the finished product fails, and the finished product is what carries the date. The COA page lists the parameters that are followed over time. ## Formulation and packaging Capsules and tablets shield the powder from water and light; the remaining risks are the excipients and the process. A direct-compression blend with a hygroscopic carrier needs a dry room and controlled dwell time. A tablet coating adds a barrier but also adds heat, so the coating step belongs in the trial. Sticks depend on the seal. A foil laminate with a continuous seam and a low moisture-vapour transmission rate is the baseline; a clear or paper format is a marketing choice that needs its own data. Nitrogen flushing the headspace is worth asking for on a lipid powder, and the pack should be rigid enough that the powder does not abrade the seam in transit. Gummies and chews are governed by water activity, pH and heat. Add the PS powder at the coolest point that still disperses it, keep the water activity low, and check the peroxide value after the process rather than only on the raw material. In a drink mix, the powder is dispersed and consumed quickly, but the stick still needs a moisture barrier for its own shelf life. ## How shelf life is assigned A shelf life is a conclusion from data on the grade and the pack, not a property of the chemical name. The specification should state the storage condition and the retest or expiry period the study supports. Bulk material that will be re-tested before use can carry a retest period; a consumer pack needs a date the shopper can read. Where the pack or the matrix has not been studied, the defensible answer is a shorter period or a new study. A 24-month figure borrowed from another pack proves nothing about this pouch, drum, stick or gummy. Ask for the study behind the number, the conditions, the parameters and the lots covered; a shelf life without that file is a guess with a date on it. The packs and the ordering unit are described on the MOQ page; the phosphatidylserine hub carries the catalog specification. The moisture test is defined in the loss-on-drying glossary entry, and the quality page explains how stability data and retained samples are held. ### 04 Phosphatidylserine: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/fatty-acids/phosphatidylserine/moq/ Reviewed: 2026-11-18 The minimum order is 1 kg, drawn from a released lot and packed in a 1 kg foil pouch; the 25 kg fiber drum is the production pack. Lead time for the catalog grade is 1–7 days. A quotation needs six details: grade and source, quantity and pack, destination and Incoterm, the document set, the label requirement, and whether a sample or stability data is part of the request. In one lineOne kilogram drawn from a released lot is the qualification unit; the pack, the source and the destination shape the order. ## Why the minimum is 1 kg A kilogram is enough to run a real trial: a lab-scale capsule or stick batch, a homogeneity check, a stability pull and a retained sample. It is not enough to launch a product, and it is not meant to be. The unit exists so a formulator can test the powder on the actual line before committing to a drum, and so a buyer can compare two lots or grades on the same tests without ordering 25 kg of each. The kilogram is cut from a released lot, not blended for the sample. That matters because the sample then carries the same lot code, the same certificate and the same history as the production material. Ask for the lot number on the pouch and on the COA, and keep a portion of the sample as the retained sample for later comparison. When the order moves to a drum, the lot may change; the certificate for the drum is the one that governs that shipment. The 25 kg drum is the economic unit for production. It reduces handling and packaging per kilogram, and it is the pack the stability study should cover if the material will be stored in it. A buyer who validates on a pouch and then receives a drum is testing a different pack. ## Packaging The catalog packs are a 1 kg foil pouch and a 25 kg fiber drum. The pouch is the unit for trials and small batches; the drum is the production pack. Both should be sealed, labelled and traceable to the lot. The pouch needs a moisture barrier because the powder is hygroscopic, and the drum needs an inner liner that keeps the powder away from the fiber wall and the closure. The label should carry the product name, the grade and PS content, the source, the lot code, the net weight, the storage condition and the allergen statement. If the material is soy-derived, the soy declaration belongs on the pack as well as on the certificate. A pack that arrives with a handwritten lot number or no source statement is a documentation problem before it is a quality problem. Ask how the pack is closed and how it is opened. A pouch that has to be cut open cannot be resealed, and a drum opened in a humid room picks up moisture every time it is sampled. A liner tie, a desiccant where the climate requires one, and a written closing routine are practical controls. ## Lead time The catalog grade is quoted at 1–7 days, which reflects material held as released stock rather than a production slot. A 20% or 70% grade, a granulated cut, a non-catalog source or a document set that has to be prepared for a new market can take longer, and the order confirmation should carry the date that applies. Transit time is separate from lead time; the quotation should state which one is being quoted. Two things commonly move the date. The first is documentation: a certificate, an allergen statement or a specification review for a new customer can take longer than the material. The second is the pack: a drum that has to be lined, labelled or palletised for a particular destination is not the same dispatch as a pouch. Give the destination and the document list at the enquiry stage. Do not plan a launch on the shortest quoted lead time. Plan on the confirmed date, and keep a buffer for the customer's own release testing. The COA page describes the tests the receiving laboratory is likely to repeat. ## What a quotation needs Six details that turn an enquiry into a usable quotation | Detail | What to state | Why it changes the quote | Grade and source | 50% catalog grade or 20%/70% on request; source stated in writing | Different powder, specification and document set | Quantity and pack | Kilograms, pouch or drum, number of packs | Pack size changes handling and dispatch | Destination and Incoterm | Country, port or address, who arranges freight | Freight, documents and transit differ | Documents | COA, specification, SDS, allergen, source, novel-food status | Some files are prepared per market | Label | Customer label, language, lot and storage fields | Labelling is a production step | Sample or stability | 1 kg trial, retained sample, stability data request | Adds a lot reservation or a data pull The most common gap is the document list. “Send the COA” can mean the batch certificate, the specification, the SDS or the full regulatory pack, and the four are different jobs. Name the market and the customer's checklist at the enquiry stage. The compliance page lists the documents a food-supplement file usually needs. The second gap is the grade. A quotation for a 50% soy powder does not cover a 70% grade or a different source. If the project is still comparing grades, ask for both lines separately so the difference is visible rather than averaged into one number. ## Samples A sample should be a 1 kg pouch from a released lot, with the lot's certificate and the specification. Test it on the parameters that matter to the formula: PS by HPLC-ELSD, peroxide value, acid value, loss on drying, particle size and appearance. Keep part of it sealed and retained so a later dispute can be checked against the material that was actually evaluated. Ask whether the sample lot will also be available for the first order. If it will not, the trial is still useful, but the first production lot needs its own release tests and its own certificate. A sample that arrives without a lot code cannot be traced back to a batch, and a sample that arrives with a different specification from the quotation is a change-control issue before it is a quality issue. ## Terms to settle before the order The commercial terms belong in the quotation and the order confirmation: the Incoterm, the payment terms, the documents that travel with the shipment, and the shelf life remaining at dispatch. The quality terms belong in a specification or a quality agreement: the release tests, the acceptance limits, the sampling plan, the retained sample period and the procedure for a non-conformance. Change control is worth a line of its own. A change of lecithin source, carrier, mesh or manufacturing site can change the certificate and the label, and the customer should be told before the change ships, not after. Ask how changes are notified and how much notice is given. The phosphatidylserine hub carries the catalog specification; the grade page explains what a grade change does to the dose, and the MOQ glossary entry defines the unit. ### 05 Where phosphatidylserine is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/fatty-acids/phosphatidylserine/compliance/ Reviewed: 2026-11-18 Permission for phosphatidylserine is route-specific. In the EU, a soya-derived route is listed as a novel food with conditions of use and a label designation; in the US, PS is a dietary ingredient supported by GRAS notices; the UK applies a retained framework. Each market file has to show the source, the PS content, the allergen, the contaminants and the claim boundary. In one linePermission depends on the source route and the market, and the file has to show both before the label is designed. ## Four checks, not one A PS ingredient is checked at four levels: the ingredient route, the food category, the contaminants and the label with its claim. They fail independently. A lot can meet the heavy-metal limits and sit on the wrong novel-food route; a route can be correct and the label omit the soy declaration. A supplier's “EU compliant” statement answers one of the four. ## The European Union Food supplements are governed by Directive 2002/46/EC, which harmonises the vitamin and mineral lists but leaves other substances, including phospholipids, to national rules. That is why a PS product can be sold in one member state and questioned in another. On top sits the novel-food Regulation (EU) 2015/2283: a food not consumed significantly in the EU before 15 May 1997 needs an authorisation, and authorised novel foods appear in the Union list in Regulation (EU) 2017/2470 with their conditions of use. The Union list contains a route for phosphatidylserine from soya phospholipids, originally authorised by Commission Implementing Decision 2011/513/EU. The entry carries the labelling designation “Soya phosphatidylserine” and a maximum of 3 g per day of phosphatidylserine in food supplements as defined in Directive 2002/46/EC at this review. It also sets use levels for other food categories. Separate entries cover other phospholipid routes, including a soy PS and phosphatidic acid product, egg-yolk phospholipids and fish phospholipids. A sunflower route is not automatically covered by the soya entry; the supplier should point to the entry the material relies on. The certificate should state the source and the PS content so the route can be matched, and the label should use the designation that belongs to that route. ## The United States In the US, PS is marketed as a dietary ingredient under DSHEA. The FDA does not approve dietary supplements or their labels before marketing, so there is no pre-market licence to point to. The framework is safety and labelling: the ingredient must be lawful, the facility follows the dietary-supplement GMPs in 21 CFR 111, and the label follows 21 CFR 101. A new dietary ingredient needs a notification at least 75 days before marketing unless its history of use takes it outside that requirement. PS has GRAS notices for soy, sunflower and fish sources, and the FDA has responded without question to several of them. GRAS status belongs to a specific substance, source and use, not to the name phosphatidylserine in general; a supplier should say which notice its material relies on. For a supplement, the dietary-ingredient route is the more direct one, with the GRAS file as supporting safety evidence. The allergen question is decided by the source. Soy is a major food allergen under FALCPA, and soy lecithin is not automatically outside the declaration because it is refined. Handle soy-derived PS as soy unless the allergen file proves otherwise, and ask for the soy protein data behind the statement. Sunflower is not on the US major-allergen list, but it is still an ingredient and should be named. ## Contaminants and the specification Catalog limits and the EU supplement ceilings at this review | Parameter | Catalog limit | EU supplement ceiling | Note | Lead | ≤3 mg/kg | 3.0 mg/kg | Regulation (EU) 2023/915 | Cadmium | ≤1 mg/kg | 1.0 mg/kg | Higher levels apply only to specified seaweed products | Mercury | ≤0.1 mg/kg | 0.10 mg/kg | Regulation (EU) 2023/915 | Arsenic | ≤2 mg/kg | No harmonised EU maximum | National or customer limits apply | Peroxide value | ≤10 meq/kg | Not a regulatory maximum | Oxidation specification, not a contaminant | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Set by the specification | Confirm the customer's criteria The catalog limits match or sit below the EU ceilings for lead, cadmium and mercury. Arsenic has no harmonised EU maximum for supplements, so the catalog limit is a customer-facing specification rather than a European legal limit; peroxide and acid values are lipid-quality parameters, not contaminants. The limit applies to the finished product, so run the calculation on the formula as well as the powder. The COA page lists the tests, and the ICP-MS method note explains the elemental panel. ## The claim boundary In the EU and the UK, health claims are governed by Regulation 1924/2006 and the GB register that mirrors it. Only authorised claims may be used, and a claim that is not on the register is not made compliant by a footnote. As of this review, there is no authorised health claim for phosphatidylserine, and PS is not a vitamin or mineral with an NRV, so the usual “high in” nutrition claims do not apply either. In the US, a structure/function claim is allowed for a dietary supplement with the required disclaimer. A disease claim is not allowed unless it is an authorised qualified health claim; otherwise it turns the product into a drug. The wording decides, and enforcement is on the finished label. The supplier provides the specification; the brand owns the claim. The safe boundary is the same in all three markets: describe what the material is and how it is tested; do not describe a disease, a disease-related use or a prevention. No disease-related claim belongs on a PS specification, COA or label. ## The file a buyer should hold Documents behind a phosphatidylserine food-supplement file | Document | What it proves | Common gap | Specification | Grade, source, limits and methods | No source or allergen line | Batch COA | The lot was released against the specification | Results copied from the range | Allergen and source statement | Soy or sunflower, with protein data | “Soy-free” claimed for a soy lot | Novel-food reference (EU) | Which Union-list entry the route relies on | Generic PS statement, no entry | GRAS or NDI reference (US) | The safety route for the source | GRAS cited for a different source | SDS and stability data | Handling, storage and shelf life | Shelf life with no study behind it | Contaminant and micro data | The lot meets the agreed limits | Panel without methods or LOQs ## The compliance checklist - Name the exact source and grade, and match it to the route for the destination. - Confirm the PS content and method on the specification. - Check the allergen declaration against the source, including soy protein data. - Compare lead, cadmium, mercury, arsenic and microbiology with the applicable limits. - Check the label designation, ingredient list, allergen statement and storage condition. - Keep the claim inside the authorised list; no disease-related wording. - Hold the COA, specification, SDS, stability data and route reference in one dated file. - Re-check the route when the source, grade or market changes. The route references are on the EU regulatory page, the US regulatory page and the UK regulatory page. The allergen list is explained in the Annex II glossary entry, and the source decision on the soy versus sunflower page. ### 06 How we prove a phosphatidylserine lot is PS URL: https://nutrition.rainwoodbio.com/products/fatty-acids/phosphatidylserine/identity/ Reviewed: 2026-11-18 A phosphatidylserine lot is identified in four layers: the documentary chain, the HPLC-ELSD chromatogram, the phospholipid and fatty-acid profile, and the matrix mass balance with its oxidation figures. A 50% assay alone cannot separate PS from soy lecithin, another phospholipid or a diluted powder. Identity is the four layers agreeing. In one lineA 50% assay is a number, not an identity; the chromatogram, the phospholipid profile and the oxidation figures have to agree. ## The four layers of identity What each identity layer proves, and what it does not | Layer | Evidence | What it proves | What it does not prove | Documentary | COA, lot code, source statement, specification | The pack is the lot in the file | That the chemistry matches the file | Chromatographic | HPLC-ELSD retention time, standard, peak area | The peak is phosphatidylserine and the content is as reported | The other phospholipids or the source | Compositional | Phospholipid profile, fatty acids, sterols | The material is a PS concentrate from the named source | The carrier or the oxidation state | Matrix | Loss on drying, carrier, mass balance, peroxide and acid values | The powder is the grade that was ordered and is not degraded | The identity of the PS on its own A certificate can describe a different lot; a chromatogram can hide the other phospholipids; a correct peak can sit in a powder whose carrier is undeclared. Identity is the four layers agreeing. The COA page explains the certificate lines. ## What the HPLC-ELSD has to show PS has no useful ultraviolet chromophore, so the standard method is HPLC with evaporative light-scattering detection. The column separates PS, PE, PC, PI, PA and LPC, the detector measures the mass that reaches it, and the PS peak is assigned by retention time against a reference standard. Three details decide whether the number is meaningful: the standard (declared purity, since a mixture makes the result uncertain), the separation (PS resolved from PE and PA, since an unresolved shoulder inflates the figure), and the integration of the species cluster. The method shows that the peak is PS and how much the powder contains, not the source, the other phospholipids or the carrier. ## PS as a share of the phospholipid sum The class profile gives a set of percentages, and the useful ratio is PS divided by the sum of the six phospholipid classes. For a 50% grade the remainder is other phospholipids and carrier, so the share falls when lecithin is added: PS drops while PC and PE rise. The PC-to-PE ratio shifts with the lecithin source, and the lyso-PC share records hydrolysis. Read together, the ratios make dilution visible even when the PS figure is inside 50.0–55.0%. A lot with PS at the floor and PC above its usual share is more likely a diluted concentrate than a low-yield batch, and the mass balance should show where the mass went. ## The phospholipid and fatty-acid profile The 50% grade contains PS at 50.0–55.0%; the balance is other phospholipids, mainly PC, PE, PI and PA, plus any carrier. The profile fingerprints the starting lecithin and the conversion. The fatty acids add a second fingerprint: both sources are linoleic-rich, but soy carries a measurable linolenic fraction that sunflower carries only at trace level. The sterol pattern adds a third and survives the conversion. Peroxide and acid values describe the oxidation state. They do not prove identity, but an oxidised lot is not the same commercial material: peroxide value ≤10 meq/kg, acid value reported, and loss on drying ≤5.0% closes the mass balance. The stability page explains how those figures move in storage. ## XRD on a phospholipid powder Phosphatidylserine has no long-range crystal order: it is a glycerol backbone with two fatty-acid chains and a polar head group, and a commercial concentrate is a waxy solid or a carrier-borne powder. A diffraction scan returns a broad halo, and a mixture of PS, PC and PE returns the same halo. The method cannot identify the class, measure the PS share or tell soy from sunflower. A sharp reflection would mean a crystalline addition — lactose, a mineral carrier or a crystalline salt — which is worth knowing, but its absence says nothing about the phospholipid. Identity comes from HPLC-ELSD with a class profile, fatty-acid and sterol fingerprints, and the mass balance. XRD is not part of that set. ## The routes that pass a PS assay Adulteration routes for phosphatidylserine and the test that catches each | Route | What still passes | What catches it | Soy lecithin added | A PS result near the bottom of the range | Phospholipid profile, fatty acids, sterols, mass balance | Other phospholipids added | Total phospholipid figure or a broad assay | Class profile by HPLC-ELSD | Lower PS content sold as 50% | Appearance and a nominal grade name | PS result, mass balance, carrier ratio | Carrier over-addition | PS inside 50.0–55.0% with carrier not declared | Mass balance, loss on drying, carrier declaration | Sunflower sold as soy, or the reverse | The same PS percentage | Fatty acids, sterols, allergen and source file | Oxidised or reworked material | The PS assay | Peroxide value, acid value, colour, odour Each route satisfies the headline number. Added soy lecithin lowers the PS percentage and raises PC and PE; an assay that integrates the whole phospholipid region as PS misses the dilution. A carrier can hold the powder weight while PS per gram falls. The defence is to specify the number and the evidence together: PS result, class profile, fatty-acid and sterol fingerprints, peroxide and acid values, loss on drying and a closing mass balance. ## How to write the identity specification Write the full name, source and grade: “Phosphatidylserine (soy-derived), 50% powder.” Then the analytical lines: “PS 50.0–55.0% by HPLC-ELSD against a PS reference standard; phospholipid profile (PS, PC, PE, PI, PA, LPC); fatty-acid profile; peroxide value ≤10 meq/kg; acid value reported; loss on drying ≤5.0%; ≥95% through 80 mesh; carrier declared if present; allergen: soy.” Add the negative statement: “No added lecithin; no undeclared carrier”, paired with the test that catches it — the class profile and sterol pattern for lecithin, the mass balance for an undeclared carrier. State whether the PS result is as-is or dried. The grade page explains what changes when the PS percentage changes; the compliance page covers the source and allergen declarations. The separation is described in the HPLC method note. ## Five questions for the supplier - Which PS result belongs to this lot, and what method, column, detector and standard produced it? - What is the full phospholipid profile, and the fatty-acid and sterol profiles? - What are the peroxide value and acid value on this lot, by which methods, and the loss on drying? - Is the source soy or sunflower, and what is the allergen and soy protein statement? - What is the mass balance, is any carrier present, and was lecithin added? Five answers amount to an identity file. The phosphatidylserine hub carries the catalog specification, and the quality page explains how the evidence is retained. ### 02.1 Soy vs sunflower phosphatidylserine: allergen, profile and label URL: https://nutrition.rainwoodbio.com/products/fatty-acids/phosphatidylserine/grades/soy-vs-sunflower/ Reviewed: 2026-11-18 Soy and sunflower phosphatidylserine are the same phospholipid class made from different lecithins. The source changes the allergen declaration, the fatty-acid and sterol fingerprint and the EU regulatory route; it does not change the PS assay. Choose the source before the grade, because the label is built on it. In one lineSoy and sunflower PS can both meet a 50% assay while carrying different allergens, fatty acids and regulatory routes. ## Two lecithins, one phospholipid class Commercial PS is made by converting the phospholipids in lecithin, and lecithin comes from a plant source. Soy lecithin is a by-product of soybean oil refining; sunflower lecithin comes from sunflower oil. Both contain phosphatidylcholine and phosphatidylethanolamine, the starting materials for the conversion that attaches serine. The conversion and purification decide the PS content; the lecithin decides the fatty acids, sterols and minor components. Either source is commercially produced at 20%, 50% or 70% PS; the catalog grade is the soy-derived 50% powder. The percentage is a concentration, not a source marker: 50% soy and 50% sunflower powders can share an assay range and still be different materials. The source belongs on the certificate and the label. ## The allergen question Soy is a major food allergen in the EU, the US and the UK. In the EU, soybeans and products thereof are on Annex II to Regulation 1169/2011, and soy lecithin is not one of the exempted highly refined oils. In the US, soy is a major allergen under FALCPA, and the refined-oil exemption does not automatically cover a lecithin-derived ingredient. The UK retains the same list. A soy-derived PS therefore needs a soy declaration unless the allergen file proves an exemption, and the file needs a documented protein analysis. Soy protein can carry through the lecithin and the conversion. The protein level in refined lecithin is low, and the PS powder is not a protein ingredient, but low is not zero. Ask for the soy protein data and the detection limit behind it, and read a “soy-free” statement on a soy-derived lot as a documentation failure until the data supports it. Sunflower is not on the EU Annex II list, the US major-allergen list or the UK list. That makes a sunflower PS easier to label for a soy-allergic consumer, but it is not allergen-free in a general sense: sunflower seed protein can still be an allergen for some individuals, and the ingredient should be named. Allergen status by market, before any exemption is claimed | Market | Soy-derived PS | Sunflower-derived PS | Label action | EU | Soy is on Annex II | Not on Annex II | Declare soy and emphasise it; name sunflower as an ingredient | US | Soy is a major allergen under FALCPA | Not a major allergen | “Contains: soy” on a soy product; name sunflower | UK | Retained Annex II list | Not on the list | Same as the EU approach ## The fatty-acid and sterol profile Both lecithins are linoleic-rich, so the PS from either source is dominated by linoleic acid. The difference is in the minor fatty acids. Soy lecithin carries a measurable linolenic fraction; sunflower lecithin is low in linolenic acid and comparatively higher in oleic acid. Linolenic acid has three double bonds and oxidises more readily, so a soy PS can be more prone to oxidation under the same handling — one factor among several, not a verdict on either source. The sterol pattern is a second fingerprint. Soy lecithin and sunflower lecithin have different sterol ratios, and the pattern survives the phospholipid conversion well enough to help a laboratory check the source. The phospholipid class ratios also differ: the balance of PC, PE, PI and PA around the PS peak is not identical between the two sources. None of these profiles is a specification on its own, but together they make a source substitution visible. Source fingerprints and what they change | Marker | Soy PS | Sunflower PS | Why it matters | Dominant fatty acid | Linoleic-rich | Linoleic-rich | Similar PS chemistry; not a source marker alone | Linolenic acid | Measurable fraction | Low | Oxidation tendency, flavour, stability | Sterol pattern | Soy lecithin pattern | Sunflower lecithin pattern | Source verification and adulteration checks | Phospholipid classes | PC, PE, PI, PA balance | Different balance | Profile comparison, not only the PS figure | Allergen | Soy declaration | No soy declaration | Label and market access ## Regulatory route and label In the EU, the Union list in Regulation (EU) 2017/2470 contains a route for phosphatidylserine from soya phospholipids, with the labelling designation “Soya phosphatidylserine” and a maximum of 3 g per day of PS in food supplements at this review. Other phospholipid routes have their own entries. A sunflower PS is not automatically covered by the soya entry, so the supplier has to identify the entry the sunflower material relies on. In the US, PS has GRAS notices for soy, sunflower and fish sources, and the dietary-ingredient route is the usual one for a supplement. GRAS status is specific to the source and the use; a soy notice is not evidence for a sunflower powder. The label names the ingredient and carries the allergen statement that the source requires. In the UK, the retained framework applies and the GB novel-food register is the reference. Northern Ireland applies the EU regime. In all three markets the label should name the source, declare the allergen that applies and use the designation that belongs to the route; the compliance page sets out the full file. ## When to choose which Choose soy when the EU soya route is the one the project has checked, the supply and specification are established, and the label can carry a soy declaration. Choose sunflower when a soy-free label is a real requirement, when the customer's allergen policy excludes soy, or when the lower linolenic fraction suits a long shelf life — provided the route and supply are confirmed. Do not regard the source as a marketing preference that can be changed at the last minute. A source switch changes the allergen statement, the label designation, the certificate, the stability profile and possibly the regulatory route. It is a change-control event, not a substitution. If the project is still comparing sources, keep both specifications open until the market and the label are fixed. The grade page covers the 20/50/70 decision, the identity page explains how the source is verified, and the phosphatidylserine hub carries the catalog specification. ## How to write the source into the specification Write the source into the product name: “Phosphatidylserine (soy-derived), 50% powder” or “Phosphatidylserine (sunflower-derived), 50% powder.” Then add the PS range and method, the phospholipid profile, the peroxide and acid values, the loss on drying, the mesh and the allergen statement. The certificate should repeat the source and the lot code, and the allergen statement should be specific to that lot rather than a generic company statement. If the source is soy and the customer needs a soy-free claim, the answer is a different material, not a different certificate. If the source is sunflower, say so on the label and keep the soy statement off it — but only after the line has been checked for soy cross-contact. The COA page lists the certificate lines, and the HPLC method note explains the separation behind the PS figure. ### 01 What the COA for vitamin D3 actually contains URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-d3/coa/ Reviewed: 2026-11-18 The certificate for a vitamin D3 lot reports appearance, identification by HPLC retention time, vitamin D3 content in IU/g, the carrier, loss on drying, particle size, the heavy-metal panel and microbiology. Each line should name the method, the release limit and the result measured on that lot. The figures on this page are the catalog specification for the 100,000 IU/g spray-dried powder; the batch COA is the document that confirms a particular pouch or drum. In one line100,000 IU/g is both an assay result and a formulation statement; the certificate has to show the IU figure, the carrier and the method behind it. ## The certificate as a test report A certificate is auditable when every row answers three questions: what was measured, how, and against which limit the lot was released. For a spray-dried powder the sheet also has to describe the matrix, because the vitamin is a small part of the powder and the carrier is the rest of it. Identity, assay and matrix · vitamin D3 100,000 IU/g powder | Parameter | Method | Release limit | Appearance | Visual | White to cream, free-flowing, water-dispersible powder | Identification | HPLC retention time | Conforms to the cholecalciferol reference standard | Vitamin D3 | HPLC, UV detection | ≥100,000 IU/g | Vitamin D3, mass basis | Calculated from the HPLC result | 2,500 µg/g (2.5 mg/g) | Carrier | Declaration and composition | Starch, gum arabic or maltodextrin, named on the certificate | Loss on drying | Gravimetric | ≤5.0% | Particle size | Sieve analysis | ≥95% through 40 mesh Contaminant and microbiological limits | Parameter | Method | Release limit | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent ## What the IU figure measures The assay reports cholecalciferol in the powder, and the certificate expresses that result in IU/g. The IU is not a mass unit: one microgram of cholecalciferol is defined as 40 IU, so the laboratory measures a mass by HPLC and the certificate converts it. The IU/g figure is a calculated expression of the HPLC result, not a second measurement. The arithmetic is worth doing before the certificate is read. At 100,000 IU/g, one gram carries 100,000 ÷ 40 = 2,500 µg, which is 2.5 mg, or 0.25% of the powder by mass. The remaining 99.75% is carrier, moisture, any declared antioxidant and the minor solids of the spray-drying feed. Pure cholecalciferol would be 40,000,000 IU/g, so this grade is a dilution of roughly one part vitamin to four hundred parts matrix. That is why the IU figure describes a formulation as much as an assay. The reporting basis has to be stated. Loss on drying is allowed up to 5.0%, and a result calculated on the dried basis is higher than the same material as sold, by the moisture fraction. Two suppliers' IU/g numbers are comparable only when the method, the reference standard and the basis are the same. The limit is a floor, not a target: a result above 100,000 IU/g is compliant, and how far above it sits is a stability and overage question. ## Release limit versus batch result The release limit is the acceptance boundary; the batch result is what the laboratory measured on that lot. Both belong on the sheet, in separate columns, with the method next to them. A result column filled with the specification range is a copy of the gate, not a result. Not every line needs a numeric window. Carrier is a declaration: the certificate names the material and, on request, its proportion. Identification is a conformance statement against a reference standard. Vitamin D3, loss on drying, particle size, the heavy metals and the micro results are measured lines, and each should carry a unit and a limit. The lot code, the manufacturing and expiry dates and the pack size belong on the same sheet. “Passes specification” is a conclusion the reader should be able to reach from the numbers; ask for the chromatogram when the IU result sits close to the floor. ## What moves between batches The IU/g result moves with the ratio of vitamin premix to carrier in the spray-drying feed, with the losses in the dryer and with the analytical method. A feed that is slightly richer raises the result; a carrier lot with a different moisture content changes the as-sold figure. The carrier is a source of variation in its own right. Starch, gum arabic and maltodextrin differ in flow, density, dispersion and hygroscopicity, and a switch from one to another changes the powder even when the IU/g stays inside the range. Colour is less quantitative and often more revealing: a cream or tan tint can point to heat exposure or oxidation while the assay still passes. A trend across lots, with the IU result drifting low and loss on drying climbing, says more than one result near an edge. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a label claim that has to be defended, or a disputed result. The useful panel is an HPLC run with a cholecalciferol reference standard, a second standard for ergocalciferol to show that the method separates the two, a check that the IU calculation uses the 40 IU per microgram factor, ICP-MS for the heavy-metal panel and the micro suite. Ask the laboratory to report the detection limit for ergocalciferol and to attach the chromatogram. A “not detected” line without a limit is evidence about the method's sensitivity, not about the sample. The report should also name the column, the mobile phase, the detection wavelength and the basis. Chain of custody matters: the sample tested should be the sample retained, and the lot code on the certificate, the pack and the sample should match. ## What to compare between suppliers Put seven lines side by side: the grade and IU/g; the assay method and the standard used; the equivalent in µg/g; the carrier and its proportion; loss on drying; particle size; and the contaminant and micro panels. Two quotations that match on IU/g but differ on the carrier, the basis or the method are not describing the same powder. The second layer is traceability. The lot code should be identical on the certificate, the pouch or drum and the retained sample. The certificate should say who manufactured the lot and which carrier was used; a correct certificate can still belong to a pack other than the one on the loading dock. Ask for the specification version the lot was released against. The catalog specification sits on the vitamin D3 product page. The grades are compared on the grade page; the tests that separate cholecalciferol from ergocalciferol are on the identity page; the ordering unit is on the MOQ page. The chromatographic method is described in the HPLC method note, the certificate terms in the COA glossary entry, and the release workflow on the quality page. ### 02 100,000 IU/g, 400,000 IU/g or oil: choosing a vitamin D3 grade URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-d3/grades/ Reviewed: 2026-11-18 Vitamin D3 is supplied as a 100,000 IU/g spray-dried powder, as a 400,000 IU/g powder on request, or as an oil on request. All three carry cholecalciferol, but the concentration decides the mass that carries a dose, the carrier that appears on the label and the process the powder has to survive. Choose on the dose and the dosage form, not on the largest IU figure in the quotation. In one lineThe grade is chosen by the dose weight and the dosage form, not by the largest IU figure on the quotation. ## Why the grade is a weighing decision first A vitamin D dose is written in micrograms or IU, and a capsule fill, a tablet blend or a stick pack is weighed in milligrams. At 100,000 IU/g, a 1,000 IU dose is 10 mg of powder; at 400,000 IU/g it is 2.5 mg. A 400 IU dose is 4 mg of the 100,000 IU/g powder and 1 mg of the 400,000 IU/g powder. Both masses are weighable, but they behave differently on a line: 10 mg is a comfortable blend component, while 1 mg is a small addition that has to be distributed evenly through a much larger batch. The grade therefore answers a physical question before it answers a commercial one: how much material has to move to carry the label dose, and can the line handle it uniformly? A more concentrated powder is not a better grade; it is a smaller weight of the same vitamin on less carrier. ## Three forms, one molecule Vitamin D3 grades, their concentration and where each fits | Form | Vitamin D3 per gram | Matrix | Typical fit | 100,000 IU/g spray-dried powder | 2,500 µg (2.5 mg) | Starch, gum arabic or maltodextrin, declared | Capsules, tablets, stick packs, drink mixes, gummies | 400,000 IU/g spray-dried powder | 10,000 µg (10 mg) | Declared carrier, thinner per IU | High-dose capsules and tablets, small serving sizes | Oil | Agreed and declared | Carrier oil | Softgels, oil drops, oily systems The 100,000 IU/g powder is the catalog standard. The 400,000 IU/g powder is the same vitamin at four times the concentration, which is useful when a capsule has to stay small or a serving has to stay light. The oil is a different physical system: it carries the vitamin in a fat instead of a water-dispersible matrix, so it suits a softgel or an oil but not a dry blend. ## What the carrier does The carrier is not empty space. It gives the powder its flow, its dispersion and its dilution factor, and it is named in the ingredient list. Starch usually gives a denser, less hygroscopic powder; gum arabic is chosen when the powder has to disperse in water; maltodextrin sits between them and is common in blends. At 100,000 IU/g the vitamin is 0.25% of the powder, so the carrier is almost the whole product. At 400,000 IU/g it is 1.0%, and the same mass of powder carries four times the vitamin. The physical limits support the dosage form: at least 95% through 40 mesh so the powder blends without lumps, loss on drying at or below 5.0% so it does not cake, and a declared carrier so the label can name it. Change the carrier and the flow, the dispersion, the fill weight and the label change with it, even when the IU/g stays inside the range. ## Converting a label dose into powder The conversion has two steps. Divide the IU figure by 40 to get micrograms, then divide the IU figure by the grade's IU/g to get grams of powder. The table does both for the two powder grades, before overage and before the rest of the formula. Label dose converted to micrograms and to powder mass | Label dose (IU) | Cholecalciferol (µg) | 100,000 IU/g powder (mg) | 400,000 IU/g powder (mg) | 400 | 10 | 4 | 1 | 800 | 20 | 8 | 2 | 1,000 | 25 | 10 | 2.5 | 2,000 | 50 | 20 | 5 | 4,000 | 100 | 40 | 10 The table is the stoichiometric minimum. A capsule that also carries a mineral blend, a stick pack with 3 g of powder and a gummy with a 2 g base each have their own uniformity limit, and the grade has to be chosen with that limit in view. A 4,000 IU dose from the 100,000 IU/g powder is 40 mg, which is a normal capsule fill; from the 400,000 IU/g powder it is 10 mg, which is easier to fit but harder to distribute in a small batch. ## What the label can say about the grade The label declares the vitamin D amount and the form, not the powder concentration. In the EU the declaration is in micrograms against a nutrient reference value of 5 µg (200 IU), and the ingredient list names cholecalciferol and the carrier. In the US the Supplement Facts panel declares vitamin D in micrograms against a Daily Value of 20 µg (800 IU); the IU may be added in parentheses, and the source is named as cholecalciferol. A 100,000 IU/g powder does not become a 100,000 IU label claim; the panel reports the micrograms that the serving delivers. This is where a grade change becomes a label change. Move from the 100,000 to the 400,000 IU/g powder and the fill weight falls, but the IU and µg on the panel stay the same because the dose is the same. Move from a powder to an oil and the ingredient list gains an oil, the dosage form may change, and the stability file has to be rebuilt for the new matrix. ## What to write into the specification, and what changes on a switch Write the concentration, the carrier and the physical limits together: “Cholecalciferol 100,000 IU/g spray-dried powder; carrier maltodextrin, declared; vitamin D3 ≥100,000 IU/g by HPLC; loss on drying ≤5.0%; ≥95% through 40 mesh.” For the 400,000 IU/g grade, change the IU figure and keep the rest. For an oil, replace them with the oil concentration, the carrier oil and the pack. A grade switch changes five things: the mass weighed per dose, the blend uniformity challenge, the carrier named on the label, the stability data that supports the shelf life, and the ordering unit. The IU arithmetic does not change, and neither does the identity of the molecule. The purchase order should name the grade rather than “vitamin D3”. The catalog ranges are on the vitamin D3 product page. The certificate lines are explained on the COA page; the light and heat limits on the stability page; the ordering unit on the MOQ page. The difference between D3 and D2 is set out on the D3 versus D2 page, and the assay is described in the HPLC method note. ### 03 Vitamin D3 is light- and heat-sensitive; the carrier decides the rest URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-d3/stability/ Reviewed: 2026-11-18 Cholecalciferol is degraded by light, heat and oxygen. In a spray-dried powder the molecule sits in a carrier that limits its mobility and its contact with air, and the pack keeps light and moisture out; those two layers, not the molecule alone, decide how much vitamin D3 survives storage. The certificate's loss on drying and the pack's barrier belong in the stability file beside the assay. In one lineThe molecule is sensitive; the powder survives because the carrier, the antioxidant and the pack take the exposure. ## The powder in the sealed pack A 100,000 IU/g spray-dried powder is a dispersion of cholecalciferol in a starch, gum arabic or maltodextrin matrix. The matrix lowers the mobility of the molecule and limits the oxygen that reaches it, which is why the dry powder in a sealed pack is the most forgiving form to store. The limits that matter are already on the certificate: loss on drying at or below 5.0%, a declared carrier, and a pack that stays closed. The 1 kg foil pouch and the 25 kg fiber drum with a food-grade liner are the two standard packs. Both are opaque when closed, and both depend on the liner being intact. A drum left open in a warm room, or a pouch folded instead of sealed, exposes the powder to moisture and light and gives the matrix a chance to cake. Store the powder cool, dry and dark, and reseal the pack between uses. ## Oil, emulsion and the gummy matrix An oil removes the water but adds a new set of reactions. The carrier oil can oxidise, and its peroxides can attack the vitamin; light passes through many oils and through clear softgel shells. A softgel therefore needs an opaque shell, a controlled headspace and an oil with its own oxidative stability. The concentration and the carrier oil should both be on the specification, because the oil is part of the stability system. In a beverage, the vitamin has to be dispersed in water even though it is fat-soluble. That means an emulsion or a fine dispersion, and the emulsion is usually the weaker part of the system: light in a clear bottle, dissolved oxygen, heat during pasteurisation and droplet coalescence can all shorten the shelf life before the cholecalciferol itself changes. In a gummy, the heat of cooking, the water activity and the cooling profile are the main variables. Adding the vitamin late in the process reduces its heat exposure but does not remove the need for a stability run in the finished matrix. ## What drives the loss Degradation routes for vitamin D3 and the controls that address them | Factor | What it does | Control | Light | Isomerises the triene system and fades the powder | Opaque or amber pack, light-protective carton | Heat | Raises isomerisation and oxidation during drying, blending or cooking | Lower process temperature, shorter residence time, cooling before packing | Oxygen | Oxidises the side chain and consumes the antioxidant | Sealed pack, controlled headspace, declared antioxidant | Moisture | Plasticises the matrix, causes caking and speeds the other routes | Loss on drying ≤5.0%, sealed pack, dry storage | Trace metals | Catalyse oxidation at low concentration | Source control, heavy-metal panel on the certificate | Acid | Can isomerise the vitamin in an acidic blend or beverage | Separate the vitamin from the acid phase, test the finished matrix The table is not a ranking. In a sealed powder, light and heat usually dominate because moisture and oxygen are already controlled. In an oil or an emulsion, oxygen and light move to the front. The same molecule can fail by a different route in each dosage form, which is why a raw-material result cannot be transferred to a finished product. ## A stability protocol that can be audited A useful protocol names the pack, the storage condition, the time points, the method and the acceptance limits before the first sample goes into the chamber. A common design pairs a long-term condition, such as 25 °C and 60% relative humidity, with an accelerated condition, such as 40 °C and 75% relative humidity, and adds a photo-stability arm modelled on ICH Q1B and an open-pack arm. The light arm is not optional for a product sold in a clear bottle or a clear capsule. At each point the laboratory should report vitamin D3 in IU/g or µg/g, loss on drying, appearance and the micro result, and for an oil or emulsion the relevant physical tests. The finished product should be tested in its own pack: a powder in a foil pouch and the same powder in a stick pack, a capsule or a gummy are different stability subjects even when the vitamin input is identical. ## Formulation and process choices The carrier is the first formulation decision. A starch matrix is less hygroscopic and gives a denser powder; a gum arabic matrix disperses more readily in water. Neither is a light barrier, so the pack still has to do that job. An antioxidant can be part of the carrier system, but it has to be declared and it does not replace an opaque pack; a light-exposed sample with an antioxidant will still isomerise. Process exposure is cumulative. Spray-drying, blending, tableting and gummy cooking each add heat, and the total is what the molecule sees. Opaque capsule shells, an opaque film coating and a secondary carton are simple barriers that are easy to specify and easy to audit. Clear capsules and clear bottles are the opposite: they look clean on the shelf and give light free access to the molecule. Overage belongs to the finished-product specification, not to the raw-material certificate. ## Assigning a shelf life Shelf life is assigned per pack, per formulation and per market, and it is supported by the stability data for that combination. The raw material's retest date does not establish the finished product's shelf life, and a batch COA does not establish either. The storage statement on the label should match a condition that was actually tested; a label that says cool and dry needs data at that condition, not only an accelerated run. Once a 1 kg pouch is opened, the remaining powder sees a different environment. Split the pack into smaller units for a long production campaign, reseal it properly, and keep it away from light. The retained sample should come from the same lot and be stored under the same condition as the batch it represents. When a certificate is requested at shipment, ask for the remaining shelf life as well as the release result. The catalog specification is on the vitamin D3 product page. The grade choice is on the grade page; the certificate lines are on the COA page; the packaging and ordering unit are on the MOQ page. The analytical method is described in the HPLC method note, and the release workflow is on the quality page. ### 04 Vitamin D3: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-d3/moq/ Reviewed: 2026-11-18 The minimum order for vitamin D3 is 1 kg, supplied in a 1 kg foil pouch; production orders use the 25 kg fiber drum, and the standard 100,000 IU/g grade is quoted at 1–7 days. The minimum follows the pack and the released lot, not a production batch, so a formulator can qualify the material without buying a drum. In one lineOne kilogram is the smallest pack drawn from a released lot, and it is enough to qualify the material before a production order. ## Why 1 kg is the ordering unit One kilogram of the 100,000 IU/g powder carries 100 million IU. At a 1,000 IU daily dose that is 100,000 doses, which is more than most pilot batches, label trials and stability programmes need. The point of the 1 kg pack is not that a production run starts at one kilogram; it is that the smallest saleable unit is a pack that can be traced to one released lot and used for qualification. The same lot can supply the sample, the pilot batch and the retained sample, which is what a qualification file needs. A 25 kg drum is the production pack, and it is ordered once the 1 kg unit has passed the customer's own tests. Buying the drum first inverts that sequence and makes a lot change expensive. ## The two standard packs Vitamin D3 packs, net weight and where each is used | Pack | Net weight | Format | Typical use | Foil pouch | 1 kg | Opaque, sealed, food-grade liner | Qualification, pilot batch, label trial, retained sample | Fiber drum | 25 kg | Fiber drum with a food-grade inner liner | Production runs and repeat orders Both packs should carry the product name, the grade in IU/g, the carrier, the lot code, the manufacturing and expiry dates and the storage statement. The carrier matters on the pack as well as on the certificate, because a customer who ordered maltodextrin should not receive a starch-based powder under the same product name. A pouch that has been opened should be resealed and kept dark and dry; the pack is part of the stability system, not just transport packaging. ## Lead time and what runs beside it The standard 100,000 IU/g powder is quoted at 1–7 days. The 400,000 IU/g powder and the oil are quoted on request and scheduled separately, because they are not the standing grade. The lead time covers the material and its release documents; transport, customs clearance and any customer-specific testing run on their own clocks and are not part of the 1–7 days. Documents usually travel with the lot: the certificate of analysis, the technical data sheet and the safety data sheet, plus the specification the lot was released against. If the destination market needs an allergen statement, a source statement or a non-GMO statement, say so in the enquiry; those documents are easier to prepare before the lot is packed than after it has shipped. ## The six details a quotation needs A quotation is only comparable when it answers the same six questions. A reply that gives only a unit figure without them is a starting point, not an offer. - Grade and concentration: 100,000 IU/g, 400,000 IU/g or oil, with the IU/g and, for oil, the carrier oil. - Quantity and pack: how many 1 kg pouches or 25 kg drums, and whether the order is a trial or a repeat. - Carrier: starch, gum arabic or maltodextrin, and whether a carrier change is acceptable. - Destination and Incoterm: the delivery country and the named place, because both change the logistics and the documents. - Documents: COA, TDS, SDS, specification, allergen, GMO and source statements, and any market-specific declaration. - Tests and tolerances: any parameter the buyer wants tightened, and the acceptance range for the assay and the contaminants. ## Samples and qualification A sample request should name the grade, the carrier, the quantity needed and the tests the sample will be put through. A sample drawn from a released lot carries that lot's code, so the result can be compared with the certificate and with the production order later. If the sample is drawn from a different lot than the one that will ship, the qualification does not transfer, and the lot code is the only way to see that. Ask for the sample's certificate and keep the retained portion. A sample that has been opened, exposed to light or stored warm is no longer a fair sample of the lot; the storage condition in the request should match the condition the material will see in the customer's warehouse. ## Terms worth agreeing before the order The commercial terms should cover the quotation validity, the Incoterm and the named place, the payment terms, the quantity tolerance, the minimum remaining shelf life at shipment, the document set that travels with the lot and the window for any claim. A claim about a result is easier to resolve when the retained sample and the lot code are named in the contract. The specification should be attached to the order, not summarised in it. If the order says “vitamin D3 100,000 IU/g” and the specification says “carrier maltodextrin, 40 mesh, LOD ≤5.0%”, the specification is the document that decides whether the lot conforms. The purchase order and the certificate should both point to the same version. The catalog ranges are on the vitamin D3 product page. The certificate lines are on the COA page; the grade choice is on the grade page; the pack and storage limits are on the stability page. The document set for a regulated market is on the compliance page, and the release workflow is on the quality page. ### 05 Where vitamin D3 is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-d3/compliance/ Reviewed: 2026-11-18 Cholecalciferol is a permitted vitamin D source for food supplements in the EU, the US and the UK. Permission is only the first check: the file also has to show that the lot meets the specification, that the label uses the permitted name and units, and that any claim on the pack is one the market allows. A compliant lot with a non-compliant label is still a non-compliant product. In one lineCholecalciferol is a permitted vitamin D source in the EU, the US and the UK; the file has to show that the form, the level, the label and the claim agree. ## Four checks, three markets A market file is four checks: is the form permitted, does the lot meet the level and the contaminant limits, does the label use the permitted name and units, and is the claim permitted? The three markets share the first answer and differ on the rest. This is a sourcing reference, not legal advice; the instruments can be amended, so check the current text. The permission route in each market | Market | Permission route | Main instruments | EU | Vitamin D source on the food-supplement positive list | Directive 2002/46/EC; Regulation (EU) No 1169/2011 | US | Dietary ingredient sold under DSHEA | 21 CFR 111; 21 CFR 101.36 | UK | Retained permitted-forms list for food supplements | Food Supplements (England) Regulations 2003 ## The EU route Directive 2002/46/EC lists the vitamins and the forms permitted in food supplements; Annex II, Part A names cholecalciferol and ergocalciferol. The route is the food-supplement list, not a novel-food entry. The carrier must be a permitted food ingredient or additive at the level used, and it is declared on the label. Regulation (EU) No 1169/2011 sets the label: vitamin D is declared in micrograms per portion and as a percentage of the nutrient reference value, 5 µg (200 IU), with the supplement particulars and the daily-dose warning. Contaminants are governed by Regulation (EU) 2023/915: lead 3.0 mg/kg, cadmium 1.0 mg/kg and mercury 0.10 mg/kg for food supplements. There is no harmonised EU maximum for total arsenic, so the specification sets one. The EU does not harmonise maximum vitamin levels, so a member state can apply its own national rule. The EFSA tolerable upper intake level for adults, 100 µg/day, is a scientific reference, not a product maximum. ## The US route In the United States, cholecalciferol is a dietary ingredient under DSHEA and was marketed before 15 October 1994, so the pre-1994 route applies rather than a new dietary ingredient notification. The finished product is made under 21 CFR 111, which requires identity testing of each component and supplier qualification. The Supplement Facts panel follows 21 CFR 101.36. Vitamin D is declared in micrograms against a Daily Value of 20 µg (800 IU); IU may be added in parentheses after the microgram figure but is optional. The source is named in the ingredient list as cholecalciferol. A structure/function statement needs the DSHEA disclaimer and must not be a disease claim. No federal lead maximum exists for supplements, so US buyers set their own and check state exposure rules such as California's Proposition 65. The supplier's certificate supports the buyer's identity test; it does not replace it. ## The UK route Great Britain retains a permitted-forms list copied from the EU lists and amended since. The Food Supplements (England) Regulations 2003, with parallel instruments in Scotland and Wales, list the vitamins and forms that may be used, and cholecalciferol is on the list. The label carries the UK supplement particulars and a nutrient reference value of 5 µg (200 IU). Contaminant limits were carried over at the EU values, and the GB claims register lists the permitted wording. Northern Ireland applies EU rules under the Windsor Framework, so a GB-only check is not enough. Re-read the current text before artwork is signed off. ## The limits in the file Catalog limits and the market note that belongs beside each | Parameter | Catalog limit | What the market file needs | Lead | ≤3 mg/kg | Result against the 3.0 mg/kg EU supplement limit; check any national or state rule | Cadmium | ≤1 mg/kg | Result against the 1.0 mg/kg EU supplement limit | Mercury | ≤0.1 mg/kg | Result against the 0.10 mg/kg EU supplement limit | Arsenic | ≤2 mg/kg | No harmonised EU supplement maximum; the buyer sets the limit | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Method and result for each test | Loss on drying | ≤5.0% | Result and basis, because moisture affects the as-sold IU/g These are catalog limits, not a statement that every market applies the same legal maximum. The certificate shows the result; the file maps it to the ceiling for the destination. ## Where the claim boundary sits In the EU, Regulation (EC) No 1924/2006 and the EU Register govern claims. A claim may be used only if it is on the Register, matches its conditions of use and is not a disease claim. Vitamin D has authorised claims, but this page does not reproduce them; the brand's review decides whether a claim is available for its product and dose. In the US, a structure/function statement needs the DSHEA disclaimer and must not be a disease claim. In the UK, the GB register governs; an EU-authorised claim is not automatically available in Great Britain. The ingredient name is not a claim: “cholecalciferol” and “100,000 IU/g” are specification terms. This supplier makes no health claim, and the brand owner is responsible for every statement on the pack. ## The document set Documents a brand should hold for a vitamin D3 lot | Document | What it should establish | Certificate of analysis | Lot code, IU/g, carrier, loss on drying, particle size, contaminants, micro | Specification | The release limits the certificate is judged against | Technical data sheet | Grade, carrier, dispersion, pack, storage and shelf life | Safety data sheet | Handling, storage and transport classification | Source statement | Lanolin or lichen route, manufacturing site and carrier source | Allergen and GMO statements | The declarations the destination market requires | Stability summary | The data behind the shelf life and the storage statement ## A short checklist - Does the certificate name the lot, the grade in IU/g and the carrier? - Is the vitamin D3 result on the stated basis and above the 100,000 IU/g floor? - Do lead, cadmium, mercury and arsenic meet the destination limits? - Does the label use micrograms and the market's reference value (5 µg in the EU and UK, 20 µg in the US)? - Is the carrier declared in the ingredient list? - Is every claim on the pack permitted for this form and this market? - Do the COA, the pack label and the retained sample share one lot code? The product specification is on the vitamin D3 product page. The certificate is explained on the COA page; the grades on the grade page; the identity evidence on the identity page; the packaging terms on the MOQ page. The release workflow is on the quality page, and the D3 versus D2 basis is on the D3 versus D2 page. ### 06 How we prove a vitamin D3 lot is cholecalciferol URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-d3/identity/ Reviewed: 2026-11-18 A vitamin D3 lot is identified in four layers: the documents and the lot chain, the chromatographic identity, the ultraviolet spectrum, and the carrier with its mass balance. At 100,000 IU/g the cholecalciferol is 0.25% of the powder, so appearance and a headline assay cannot carry the identification. In one lineAt 0.25% cholecalciferol the powder is mostly carrier, so identity has to come from the chromatogram and the mass balance, not from the colour. ## The four layers of identity What each identity layer proves, and what it does not | Layer | Evidence | What it proves | What it does not prove | Documentary | Name, CAS 67-97-0, formula C27H44O, COA, lot code, specification | The lot in the pack is the lot in the file | That the chemistry matches the file | Chromatographic | Retention time against a cholecalciferol standard, co-injection, peak purity | The main peak is cholecalciferol | The carrier or the concentration | Spectroscopic | UV spectrum around 265 nm, diode-array comparison | The peak has the vitamin D chromophore | Which vitamin D, if the method does not resolve D2 | Matrix | Carrier declaration, IU/g versus µg/g, loss on drying, mass balance | The powder is the grade that was ordered | The identity of the molecule on its own A certificate can be genuine and still describe a different lot; a chromatogram can hide ergocalciferol if the method does not resolve it; a correct peak can sit in a powder whose carrier is undeclared. Identity is the four layers agreeing. ## What the HPLC has to show Cholecalciferol is normally determined by HPLC with UV detection near 265 nm against an external reference standard. The retention time establishes the peak, and a standard addition strengthens the assignment. The method has to resolve cholecalciferol from ergocalciferol and the other vitamin D isomers. Ask for the chromatogram, column, mobile phase, wavelength and integration parameters. The chromatogram should show the cholecalciferol peak, the region where ergocalciferol would appear, and the reference standard run under the same conditions. The IU/g figure is calculated from the mass result at 40 IU per microgram, so the calibration is part of the identity evidence. LC-MS helps when the peak assignment is disputed: cholecalciferol and ergocalciferol differ in molecular mass, 384.64 and 396.65 g/mol, so a mass detector separates them even when the UV peaks overlap. ## The IU-to-microgram ratio The potency on the label and the mass on the certificate are connected by a fixed ratio: 1 µg of cholecalciferol is 40 IU, so 100,000 IU/g is 2,500 µg/g, and the vitamin is 0.25% of the powder by weight. A certificate that reports one unit without the other is only half readable. The ratio is also the arithmetic check on a suspicious result. A figure of 2,500 µg/g read as IU would suggest a powder at one fortieth of the declared grade, while 2,500 IU/g is an actual under-concentration. Converting both ways keeps a unit error from being mistaken for a quality failure. ## D3 versus D2 in the same assay A method calibrated only with a cholecalciferol standard can misreport an ergocalciferol peak, because the two have similar but not identical UV response. The certificate should name the standard and state the detection limit for the D2 screen. Both forms are permitted vitamin D sources in the EU, the US and the UK, so D2 is not automatically a legal problem. It is a specification problem: a label that names D3 cannot be satisfied by D2. ## The carrier is part of the identity At 100,000 IU/g, one gram contains 2,500 µg of cholecalciferol and about 997.5 mg of carrier and spray-drying solids. The mass balance should close: assay, loss on drying and carrier add up to the powder, and the carrier share has to be declared. The carrier also interferes with identity testing. Microscopy sees starch granules or gum particles, not the molecule; an infrared spectrum sees the matrix as well as the vitamin. The specification must name the carrier so that a change of carrier is a change of product, and loss on drying at or below 5.0% and at least 95% through 40 mesh describe that matrix, not the vitamin. ## Why XRD does not identify the powder Cholecalciferol is crystalline as an isolated substance, but the 100,000 IU/g product is a spray-dried dispersion in which the vitamin is 0.25% of the mass. XRD sees the carrier and the spray-dried matrix, not a cholecalciferol lattice: the organic crystals would sit far below the few-percent detection limit of a phase scan, and the carrier may return only a halo. The method cannot distinguish cholecalciferol from ergocalciferol at this loading, and it cannot quantify IU. XRD is therefore not a release identity test here. What is used is HPLC with ultraviolet detection near 265 nm, retention time against a cholecalciferol standard, a diode-array spectrum, a D2 screen and the mass balance. A diffraction pattern may help with the crystalline raw material, but it is not evidence about the drum. ## The routes that pass a headline assay Routes that survive a total assay, and the test that catches each | Route | What still passes | What catches it | Under-concentration | Appearance and a nominal grade name | HPLC result against 100,000 IU/g, mass balance | Ergocalciferol substituted or added | A broad “vitamin D” assay | Retention time, D2 standard, UV or mass detection | Undeclared carrier or extra diluent | IU/g inside the range | Carrier declaration, mass balance, LOD | Oxidised or aged material | A result near the floor | Chromatogram impurity profile, appearance, stability history Each route satisfies the number that is easiest to check, so the defence is to specify the headline number and the supporting evidence together: identity by retention time, the D2 screen, the carrier, the mass balance and the lot traceability. ## How to write the identity specification Write the full name and the form: “Cholecalciferol (colecalciferol, CAS 67-97-0), 100,000 IU/g spray-dried powder on a declared carrier.” Then the analytical lines: “Identification by HPLC retention time against a cholecalciferol reference standard; vitamin D3 ≥100,000 IU/g; equivalent 2,500 µg/g; carrier starch, gum arabic or maltodextrin, named on the certificate; loss on drying ≤5.0%; ≥95% through 40 mesh; heavy metals and microbiology as listed.” Add the negative statement: “No ergocalciferol added; no undeclared carrier.” Pair it with the D2 screen and the mass balance, since a negative statement is only useful if the method can detect the substance. State whether the IU result is on an as-sold or dried basis, and require the chromatogram near the floor. ## Five questions for the supplier - Which IU/g and µg/g results belong to this lot, and on what basis? - Can you send the chromatogram, the column, the mobile phase and the wavelength? - Was ergocalciferol screened, with what standard and what detection limit? - What is the carrier, at what proportion, and is it the only diluent? - Does the certificate name the lot, the manufacturing site and the specification version? Five direct answers amount to an identity file. The product page carries the catalog specification; the COA page explains each figure; the grade page explains the concentration; the D3 versus D2 page covers the molecular difference. The HPLC method note explains the separation, and the quality page describes the release workflow. ### 02.1 Vitamin D3 vs D2: what the label and the assay change URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-d3/grades/d3-vs-d2/ Reviewed: 2026-11-18 Vitamin D3 (cholecalciferol) and vitamin D2 (ergocalciferol) are different molecules with different sources, different molecular masses and different analytical standards. They share one thing: the labelling convention that gives 1 µg of either form 40 IU. The label has to name which molecule the product contains, and the assay has to be calibrated for that molecule rather than for “vitamin D” in general. In one lineD3 and D2 share the IU arithmetic but not the molecule; the label must name which one, and the assay must be calibrated for it. ## Two molecules, two starting materials Cholecalciferol and ergocalciferol side by side | Property | Vitamin D3 | Vitamin D2 | Name | Cholecalciferol | Ergocalciferol | Formula and mass | C27H44O · 384.64 g/mol | C28H44O · 396.65 g/mol | CAS | 67-97-0 | 50-14-6 | Usual source | Lanolin cholesterol, or lichen, converted by UV | Ergosterol from yeast or fungi, converted by UV Both forms occur in nature and both are made commercially by ultraviolet irradiation of a sterol precursor: 7-dehydrocholesterol for D3, ergosterol for D2. The source route belongs in the file because it drives the vegan statement and the allergen review. Lanolin-derived D3 is not vegan; lichen-derived D3 is the usual vegan option; D2 from yeast is generally accepted as vegan. None of this changes the molecule's identity, but it changes what the label and the customer specification have to say. ## The IU arithmetic is shared The IU is a unit of vitamin D activity, and the labelling convention assigns 40 IU to one microgram of cholecalciferol and to one microgram of ergocalciferol. A 10 µg dose is 400 IU, a 25 µg dose is 1,000 IU and a 100 µg dose is 4,000 IU, whichever of the two forms carries it. The conversion is not a statement that the two molecules behave identically in every respect; it is the arithmetic that the label uses. This is why a potency comparison has to be read carefully. A D3 product is often described as more potent than a D2 product, but in labelling terms the two are assigned the same 40 IU per microgram, so a 25 µg D2 capsule and a 25 µg D3 capsule both declare 1,000 IU. A switch from one form to the other is a change of ingredient, not a rescaling of the dose. Any question about the effect of the two forms in the body is outside this page, which deals with identity, assay and label. ## What the label has to name In the EU, vitamin D is declared in micrograms per portion and as a percentage of the nutrient reference value of 5 µg (200 IU), and the ingredient list names the form that is present, cholecalciferol or ergocalciferol. In the US, the Supplement Facts panel declares vitamin D in micrograms against a Daily Value of 20 µg (800 IU), with the source in parentheses, for example “Vitamin D (as cholecalciferol)”; IU may be added after the microgram figure but is optional. The UK uses the EU-style declaration and the 5 µg reference value. “Vitamin D3” is a specific name, not a synonym for vitamin D. A product made with ergocalciferol cannot be labelled as D3 or cholecalciferol, and a product made with cholecalciferol should not be described as D2. The form also belongs in the specification and on the certificate, because the label claim and the analytical standard have to point to the same molecule. ## What the assay has to resolve Cholecalciferol and ergocalciferol are close enough in their ultraviolet spectra that a method which reports a single “vitamin D” peak may not show which molecule it measured. A defensible assay runs a reference standard for the form named on the label, resolves the two peaks, and reports the result against the matching standard. Co-injection or a diode-array spectrum strengthens the assignment, and mass detection separates the two by molecular mass when the peaks overlap. The certificate should name the standard, the column, the mobile phase and the wavelength, and it should state whether the other form was screened and at what detection limit. A D3 certificate is not a D2 certificate: the same IU/g figure can describe two different molecules, and only the chromatogram and the standard tell them apart. This is also why a supplier change from D3 to D2 requires a new specification and a new certificate, not a note on the old one. ## The regulatory basis is form-specific In the EU, Directive 2002/46/EC Annex II, Part A lists both cholecalciferol and ergocalciferol as permitted vitamin D sources, so either form can be used in a food supplement. In the US, both are dietary ingredients sold under DSHEA. In Great Britain, both are on the retained permitted-forms list. The permission attaches to the named form, which is why the label and the certificate have to name it. The contaminant limits and the labelling rules are the same for both forms, and the claim route is the same: a claim has to be permitted for vitamin D in the market where the product is sold, and the supplier makes no claim for the ingredient. What changes between the forms is the ingredient name, the analytical standard and the source statement, not the permission to sell vitamin D. ## Can one form replace the other? In a formula, the two forms are not a like-for-like substitution. The dose arithmetic survives, because 40 IU per microgram applies to both, but the label, the specification, the supplier's certificate, the stability data and the source statement all change. A D2 lot cannot be released against a D3 specification, and a D3 lot cannot satisfy a label that names ergocalciferol. If a form change is being considered, ask for the new certificate, the chromatogram with the matching standard and a stability summary for the new matrix. The vitamin D3 product page covers the cholecalciferol grade; the identity page sets out the four-layer proof; the COA page explains the assay and the carrier. The compliance page covers the market file, and the HPLC method note describes the separation. ### 01 What the COA for biotin actually contains URL: https://nutrition.rainwoodbio.com/products/vitamins/biotin/coa/ Reviewed: 2026-11-18 A biotin COA is short, and most of its value sits in the columns that explain how each figure was obtained. It should identify the material by IR, quantify it by HPLC, fix the chiral form by specific rotation, and place water, ash, particle size, metals and micro results beside the limits they were released against. The values on this page are catalog limits; the lot-specific numbers belong on the certificate that travels with the pack. In one lineThe assay says how much biotin is in the drum; the rotation and the IR say what it is, and the drying basis says what the number means. ## The certificate as a line-by-line report Start with the identity block, because a lot that fails identity cannot be rescued by a good assay. The first table covers appearance, the IR match, the HPLC assay, the rotation and the two gravimetric lines. Identity, assay and moisture · biotin | Parameter | Method | Release limit | Appearance | Visual | White crystalline powder | Identification | IR, compared with a reference spectrum | Conforms | Assay (C10H16N2O3S) | HPLC | 97.5–102.0% | Specific rotation | Polarimetry, 2% in 0.1 M NaOH | +89° to +93° | Loss on drying | Gravimetric | ≤1.0% | Residue on ignition | Gravimetric | ≤0.1% The second table covers the physical and contamination block. Sieve analysis describes the powder, ICP-MS describes the inorganic contaminants, and the plate count and absence tests describe the microbiological state. These are separate measurements and should not be merged into one purity figure. Physical, contaminant and microbiological limits | Parameter | Method | Release limit | Particle size | Sieve analysis | ≥95% through 80 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent ## What the assay, the rotation and the drying step measure HPLC answers the amount question. It does not answer the identity question, because a retention time can be shared by a related substance; the certificate needs an IR match and a rotation result alongside the assay. The method write-up should name the detector and the reference standard, since biotin's ultraviolet absorbance is weak and the detector conditions affect the result. Rotation is the chiral measurement. The catalog window is +89° to +93°, run at 2% in 0.1 M NaOH. The observed angle depends on concentration, solvent, path length and temperature, so a certificate that omits those conditions gives the reader a number that cannot be compared with another laboratory's. The basis also matters: the figure may be calculated on the dried material or on the material as received. Loss on drying measures water and volatiles under the stated conditions, with a ceiling of 1.0%. That ceiling is wide enough to shift an assay by about one percentage point when the basis changes. For example, 97.6% as-is with 0.9% loss on drying would be about 98.5% on the dried basis. The certificate should say which basis the 97.5–102.0% window uses, or two readers can disagree while both are correct. Residue on ignition stands for the inorganic fraction left after ignition. It is not an ICP-MS result and should not be read as one. The same separation applies to the micro panel: a total plate count and an absence test describe different things, and both belong on the page. ## Release limit versus batch result A limit is a decision rule; a result is a measurement. The certificate needs both, in separate columns, with the method close enough that the reader can see how the number was produced. When the result column simply repeats the specification, the reader has no evidence that the lot was tested at all. Some parameters are reported as conformity. IR is the usual case: the certificate may say “conforms” when the sample spectrum matches the reference, but the spectrum should be retained for inspection. For rotation, a bare “conforms” is less useful than the observed angle, because +89.2° and +92.8° both pass and sit at opposite ends of the window. Absence tests also need a test portion. “Salmonella absent” is a statement about the portion that was tested, not about the whole drum, and the certificate should name that portion. A conclusion of “passes specification” should be reachable from the page, not assumed from a tick box. ## What moves between batches Assay, water content and rotation follow the synthesis, crystallisation and drying steps; milling and sieving change the particle-size result. Colour and flow are less quantitative: a slightly off-white lot can pass every release test while indicating a different drying history or a trace of process residue. Look at the direction of travel, not only the latest result. Rotation moving toward +89°, water moving toward 1.0% or the 80-mesh fraction falling toward 95% all show a process changing while each individual lot is still released. For a formula with a tight fill weight or a low-dose blend, the previous four certificates are more informative than one. ## When to order an outside test Use an independent laboratory when the source is new, when the lot is the first into a regulated market, when a result is disputed, or when the supplier's own certificate does not settle an identity question. A focused panel is enough: IR with a reference spectrum, HPLC for the assay, polarimetry for the rotation, ICP-MS for the metals and the micro tests named in the specification. The report should give the detection limit for each contaminant and include the raw IR spectrum and chromatogram. “Not detected” without a limit tells the reader about the method, not the sample. Keep the chain of custody intact: the sample that was tested should be the sample that was retained, and the lot code should match the certificate and the pack. ## What to compare between suppliers Compare six columns: grade and carrier; assay method and basis; rotation with its conditions; water content; particle-size result; and the contaminant and micro panel. If two offers agree on assay but diverge on the other five, they are not the same material. Traceability is the next layer. The lot code on the certificate, the pack and the retained sample should be the same, and the manufacturing site should be named on it. A dilution needs its biotin content in mg/g and its carrier on the same page as the pure-material assay; the 97.5–102.0% window is not the right limit for a 1% blend. The catalog limits are on the biotin product page. The grade comparison is on the grade page, the identity tests on the identity page, and the release workflow on the quality page. The HPLC method is described in the HPLC method note. ### 02 Pure biotin or a 1% dilution: choosing a biotin grade URL: https://nutrition.rainwoodbio.com/products/vitamins/biotin/grades/ Reviewed: 2026-11-18 Biotin is supplied as a crystalline powder and as a 1% or 2% dilution, and the grade question is arithmetic before it is commercial. At a microgram label claim, the pure powder is too small to weigh into a capsule, so the dilution supplies the mass that makes the dose measurable and blendable. The grade then changes the specification, the carrier declaration and the uniformity work, not just the number on the assay. In one lineThe grade is set by the micrograms on the label and the milligrams the capsule can carry, not by the assay on the drum. ## Why the grade question exists One kilogram of pure biotin contains about a thousand grams of the vitamin. At a 100 µg label claim that is ten million portions; one kilogram of a 1% dilution contains ten grams of biotin and covers one hundred thousand portions at the same claim. The pure drum is efficient for a high-dose formula and awkward for a low-dose one, because the quantity per capsule is a fraction of a milligram. A dilution solves the handling problem by adding a food-grade carrier. It does not change the biotin molecule, and it does not make a low dose any less sensitive to mixing. It moves the uniformity question one step upstream, from the capsule fill to the premix, and it adds a carrier that has to be declared and controlled. ## Pure, 1%, 2% and granulated Biotin grades and the mass needed for a 100 µg label claim | Grade | Biotin content | Mass for 100 µg | Where it fits | What to verify | Pure crystalline | 97.5–102.0% by HPLC | 0.1 mg | Milligram-dose formulas; dry blends with a robust premix step | Identity, rotation, loss on drying, particle size | 1% dilution | 10 mg/g nominal | 10 mg | Microgram-dose capsules, tablets and stick packs | Biotin content in mg/g, carrier, uniformity | 2% dilution | 20 mg/g nominal | 5 mg | Microgram dose with a smaller fill or a more concentrated premix | Biotin content in mg/g, carrier, uniformity | Granulated | As agreed on the base | As agreed on the base | Dust control, flow and segregation-sensitive blends | Granule size, carrier, content, uniformity The conversion is simple and worth writing down. A 1% dilution is 10 mg of biotin per gram, or 10,000 µg/g; one milligram of that dilution carries 10 µg of biotin. A 2% dilution is 20 mg/g. The pure material is not 100%: the catalog assay window is 97.5–102.0%, and “pure” is the grade name, not a purity figure. ## Uniformity, particle size and the carrier A dilution is a blend, and its quality is a mixing result. At a 100 µg claim the 1% dilution is only 10 mg of a 500 mg capsule, which is 2% of the fill; at 30 µg it is 3 mg, or 0.6%. A small inclusion is where segregation, electrostatic charge and a carrier with the wrong particle size show up. The certificate for the dilution should report the biotin content and the carrier, and the supplier should be able to show the mixing record and the uniformity data behind the lot. The carrier is an ingredient, not packaging. It has to be food-grade, compatible with the other actives and declared on the finished label. Its particle size and density should be close to the rest of the blend, or the premix will separate in the hopper. The pure powder is specified at ≥95% through 80 mesh; a dilution may use a different mesh because the carrier, not the biotin, now sets the flow. ## What each dosage form needs For capsules and tablets, the grade follows the fill weight. A 500 mg capsule can carry 5 mg of pure biotin at a 1% inclusion, so a milligram-dose formula can use the pure grade without a dilution. A 100 µg claim needs 10 mg of a 1% dilution or 5 mg of a 2% dilution, and the rest of the fill is excipient. The smaller the biotin mass, the more the formula depends on a uniform premix. For powder sticks and drink mixes, the dilution has to disperse in the pack and in the glass. Biotin is sparingly soluble in water and soluble in dilute alkali, so a dilution is not a solubiliser; it is a handling aid. For gummies and chews, the aqueous process, the heat and the pH belong in the grade decision, and the carrier has to be one the process can tolerate. In every form, the label declares biotin in micrograms, not the weight of the dilution. ## What changes when the grade changes The pure-material assay window does not transfer to a dilution. A 1% grade needs a content specification in mg/g, a carrier identity and a uniformity result; its certificate should not be read against 97.5–102.0%. The same switch changes the loss-on-drying limit, the particle-size method, the micro panel and the sampling plan, because the carrier is now the majority of the powder. The label changes too. The finished product declares the biotin content per portion and the percentage of the nutrient reference value or daily value, and the carrier appears in the ingredient list. “Pure biotin” is not a permitted description of a 1% dilution, and “1%” is a specification term rather than a consumer claim. The grade belongs in the purchase specification, the certificate and the technical data sheet, where the formulator and the auditor can see it. ## When pure is the right choice Pure crystalline biotin is the simpler material when the label claim is in milligrams, when the formula already has a premix step that can handle a small inclusion, or when the carrier would add an ingredient the label does not want. It is also the right reference sample when a dilution is being qualified, because the identity and rotation tests are run on the pure material. A dilution is the better choice when the dose is in micrograms, when the fill weight is large, or when the factory cannot weigh 0.1 mg accurately and repeatedly. The decision is not about which grade is stronger. It is about which grade puts a weighable, mixable and declarable quantity into the process. The catalog options sit on the biotin product page. The fill-weight arithmetic is worked through on the pure versus 1% page; the certificate lines are on the COA page; the blend and storage risks are on the stability page; the pack sizes are on the MOQ page. The particle-size term is defined in the glossary. ### 02.1 Pure biotin vs a 1% dilution: what the fill weight hides URL: https://nutrition.rainwoodbio.com/products/vitamins/biotin/grades/pure-vs-1-percent/ Reviewed: 2026-11-18 A capsule fill weight says nothing about the biotin dose. The same 500 mg fill can carry 5 mg of pure biotin at a 1% inclusion or 30 µg from a 1% dilution at a 0.6% inclusion, and both look like a 500 mg capsule. The grade, the inclusion and the label claim are the numbers that decide the dose; the fill weight is only the space. In one lineA 500 mg capsule can hold 5 mg of biotin or 30 µg, and the fill weight looks the same either way. ## The arithmetic of pure and 1% A 1% dilution is 10 mg of biotin per gram, or 10,000 µg/g. To find the mass of dilution for a label claim, divide the claim by 0.01; for a 2% dilution, divide by 0.02. The pure material needs no division: the mass of biotin is the claim. The results are small enough to explain why the grade question exists. Biotin mass needed for five label claims, by grade | Label claim | Pure biotin | 1% dilution | 2% dilution | 1% mass as share of a 500 mg fill | 30 µg | 0.03 mg | 3 mg | 1.5 mg | 0.6% | 100 µg | 0.1 mg | 10 mg | 5 mg | 2% | 300 µg | 0.3 mg | 30 mg | 15 mg | 6% | 1,000 µg | 1 mg | 100 mg | 50 mg | 20% | 5,000 µg | 5 mg | 500 mg | 250 mg | 100% At 30 µg the pure material is 0.03 mg, which is not a practical production weigh. The 1% dilution turns the same claim into 3 mg, and the 2% dilution into 1.5 mg; neither is a comfortable direct weigh, which is why a dilution is usually handled as a premix rather than as a single capsule addition. At 5,000 µg the arithmetic reverses: 500 mg of a 1% dilution fills a 500 mg capsule completely, leaving no room for anything else. ## What the fill weight hides The fill weight is set by the capsule size and the powder density. It does not say how much of that powder is biotin, how much is carrier and how much is filler. A 500 mg capsule with 5 mg of pure biotin is 1% biotin and 99% other material; a 500 mg capsule with 500 mg of a 1% dilution is 1% biotin and 99% carrier. The two capsules carry the same biotin but have a different ingredient list, and the fill weight is identical. The more common case is a low-dose capsule: 100 µg of biotin from 10 mg of a 1% dilution, with 490 mg of filler. The dilution is 2% of the fill by mass, and the biotin is 0.02% of the fill. Nothing on the fill-weight line tells the formulator that the active is a 10 mg inclusion, and nothing on the label tells the consumer that the capsule is mostly excipient. The label claim and the grade are the only two numbers that describe the dose. ## Why a small inclusion is a uniformity problem At a 100 µg claim, the 1% dilution is 10 mg in a 500 mg fill, or 2% by mass. At 30 µg it is 3 mg, or 0.6%. Segregation, electrostatic charge and a mismatched carrier all become visible when the inclusion is this small. The biotin is no longer the powder; it is a minority component dispersed in a carrier, and the carrier is dispersed in the filler. The control is a premix, not a longer tumble. The carrier's particle size and density should be close to the filler's, the premix should be made in a proportion the blender can disperse, and the blend should be sampled at the top, middle and bottom of the blender and across the fill. A relative standard deviation of 5% or better across the sample points is a common target, agreed in the specification rather than assumed. A 1% dilution is usually a premix, not a finished blend, and a low-dose formula may need a further step-down dilution before the capsule fill. ## Capsules, sticks and gummies For capsules and tablets, the grade follows the fill weight and the claim. A milligram claim can use pure biotin if the fill can carry it; a microgram claim needs a dilution and a premix step. For sticks and drink mixes, the dilution has to disperse in the pack and in the glass, and the carrier has to be one the consumer will accept in the ingredient list. For gummies, the aqueous process, the heat and the pH are part of the grade decision, and the carrier has to survive them. A dilution is not a solubiliser. Biotin is sparingly soluble in water and soluble in dilute alkali; a 1% dilution on a soluble carrier disperses faster, but it does not raise the solubility of the biotin. In a clear drink, the relevant question is the concentration in the finished volume, not the grade name on the drum. ## What the label can and cannot say The finished label declares biotin in micrograms per portion and the percentage of the nutrient reference value or daily value. It does not declare the dilution weight, the carrier weight or the fill weight. The carrier is an ingredient and belongs in the ingredient list; the grade belongs in the specification and the certificate, not in a consumer claim. A product made with a 1% dilution cannot be described as pure biotin, and “1%” is not a label claim. The label claim is the biotin mass per portion, and it has to survive the assay tolerance of the destination market. The grade is the supplier's language for what is in the drum; the label is the consumer's language for what is in the portion. ## When to choose which - Choose pure biotin when the claim is in milligrams, the fill can carry the mass, and the plant can disperse a small inclusion through a premix. - Choose a 1% dilution when the claim is a few hundred micrograms or less and the fill weight is large enough to hold a weighable quantity. - Choose a 2% dilution when the 1% mass would be too large for the fill or when the premix needs a higher biotin concentration. - Choose a step-down dilution or a granulated grade when the inclusion falls below about 1% of the fill and the blender cannot prove uniformity. The decision is arithmetic first, uniformity second and label third. A grade that looks simpler to handle can put less biotin into the capsule if the content and the inclusion are not checked; a grade that looks more convenient can add a carrier the label does not want. The fill weight is the least useful number in the comparison because it is the same for both. The grade options sit on the biotin product page and the comparison is on the grade page. The certificate lines are on the COA page, the blend risks on the stability page and the pack sizes on the MOQ page. ### 03 Biotin is stable dry; the low dose makes the blend the risk URL: https://nutrition.rainwoodbio.com/products/vitamins/biotin/stability/ Reviewed: 2026-11-18 Dry crystalline biotin is stable in storage, and the stability work belongs to the blend rather than to the drum. Moisture, heat in an aqueous process, light in solution and the carrier can all change the powder while the pure-material assay still looks acceptable. At a microgram dose, the part of the formula that carries the biotin is the part that decides the shelf life. In one lineThe drum is the stable part; the micrograms inside the blend are what the shelf life has to protect. ## The dry powder is the easy part The catalog material is a white crystalline powder with a loss-on-drying limit of ≤1.0% and ≥95% passing 80 mesh. Kept dry and sealed, the crystalline solid is not the fragile component of a supplement. The release loss-on-drying result is a gate for the lot, not a stability study, and a lot that passes it can still pick up moisture after the pack is opened. The practical dry-storage risks are caking, lumping and a change in flow. A pouch that is left open in a humid room, or a drum that is opened and closed repeatedly, exposes the powder to the room air and to the moisture that comes with it. The answer is a pack with a moisture barrier, a closed drum, a clean scoop and a storage statement that matches the pack. None of that requires a new specification; it requires the pack to be treated as part of the product. ## Water changes the question Biotin is sparingly soluble in water and soluble in dilute alkali. In an aqueous process it is present at a low concentration, and that is where hydrolysis and oxidation become relevant. Strong acid and strong alkali attack the molecule, and an oxidising environment can change the sulfur-containing ring. A dry blend does not present those conditions; a gummy, a drink mix or a liquid concentrate does. A 1% dilution on a water-soluble carrier disperses faster than the pure crystalline powder, but it does not make biotin more soluble. The carrier dissolves and the biotin is carried with it, at a concentration set by the dilution. If the process holds the mix hot for a long time, or at a pH far from neutral, the loss can be real even when the visual appearance does not change. The analytical method also has to be validated at the concentration in the blend, not at the concentration of the pure powder. ## What actually moves the result Stability factors for biotin in a dry blend and in an aqueous process | Factor | What it does | Control | Moisture | Caking and surface hydrolysis; carrier clumping | Sealed pack, ≤1.0% loss on drying, dry storage | Heat | Dry heat is not the main risk; heat with water accelerates change | Limit process temperature and hold time | Light | Photodegradation is most relevant in solution | Opaque or light-protective pack; covered process | Oxygen | Oxidation of the sulfur-containing ring in solution | Minimise dissolved oxygen and headspace air | pH | Strong acid or alkali hydrolyses the molecule | Keep the aqueous process near neutral; check the final pH | Matrix | Carrier, other actives and trace metals can change the local environment | Compatibility trial on the finished blend The table is a set of questions, not a set of guarantees. A dry blend in a sealed pouch is not exposed to light in the same way as a clear gel, and a gummy is not exposed to the same water activity as a stick pack. The stability protocol has to describe the pack and the matrix it actually tests. ## A stability protocol that tests the blend Test the finished blend in the market pack, not only the pure powder in a laboratory jar. The protocol should name the pack, the fill weight, the closure and the storage conditions, and it should include a real-time condition and an accelerated condition. Loss on drying, appearance, assay and the micro panel are the basic tests; a blend with an aqueous step should add pH and water activity. A control blend without biotin is useful. It shows whether a colour change or a flow problem comes from the matrix rather than from the vitamin, and it separates a carrier failure from an assay failure. Sample points at the start, the middle and the end of the intended shelf life, with the same method at every point, give a line that can be read; a single end-point result cannot show a trend. ## The formula is the risk A 1% dilution is 99% carrier. The carrier's moisture, particle size, flow and compatibility with the other actives now dominate the blend, and the biotin is a small passenger. A change of carrier is a change of formula even when the biotin content in mg/g stays the same, so the stability file has to follow the carrier and not just the vitamin. Overage is a formulation decision, not a substitute for stability. Adding extra biotin at the start can hide a loss at the end, but it also changes the label calculation and the material balance. The label claim is the target; the release assay and the stability data show whether the target survives the pack. ## Retest period and shelf life The pure material carries a retest period; the finished product carries a shelf life. They are different dates with different evidence behind them. The certificate's retest date is an operational instruction for the drum, and it should be supported by stability data on the same pack. The finished shelf life belongs to the brand and to the matrix it tested. A 1% dilution can have a shorter shelf life than the pure drum, because the carrier adds surface area, moisture and a second set of compatibility questions. The data, not the grade name, sets the date. If a supplier offers to extend a retest period without new data, the right answer is to ask for the protocol and the results. The storage statement, the pack and the stability file are described alongside the catalog specification on the biotin product page. The grade choice is on the grade page, the certificate lines on the COA page, the document set on the compliance page and the release workflow on the quality page. ### 04 Biotin: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/vitamins/biotin/moq/ Reviewed: 2026-11-18 Biotin orders start at 1 kg, packed as a 1 kg foil pouch, with a 25 kg fiber drum for production volumes and a lead time of 1–7 days. The minimum is a qualification unit rather than a retail pack: it is enough material to run a bench trial, check the identity and the blend behaviour, and decide whether the drum is the right next step. A quotation needs six details before it can be a real offer. In one lineOne kilogram is the qualification unit: enough to run a bench trial and a small batch from a lot you can trace. ## Why the minimum is one kilogram At a 100 µg label claim, one kilogram of pure biotin covers about ten million portions, and one kilogram of a 1% dilution covers about one hundred thousand. Either pack is far larger than a bench trial needs, which is exactly why the 1 kg pouch works as a qualification unit: it carries a released lot, a certificate and a lot code, and it lets the formulator test the real material rather than a hand-made laboratory blend. The same minimum applies to both grades, but it buys a different amount of biotin. One kilogram of the pure grade is close to a kilogram of biotin; one kilogram of a 1% dilution is about ten grams of biotin plus carrier. The order quantity is the same and the biotin units are not, so the grade has to be settled before the quantity is compared. ## The pack is part of the specification Biotin pack sizes and what each one is for | Pack | Net content | Typical use | What to check | Foil pouch | 1 kg | Bench trial, sample qualification, small batch | Moisture barrier, food-grade liner, lot and retest label | Fiber drum | 25 kg | Production batch, repeated use in a blend | Liner condition, closure, net weight, drum labelling The pouch and the drum are not interchangeable beyond their size. The pouch is the pack a formulator opens and closes during a trial, so its moisture barrier and its reseal behaviour matter. The drum is a production pack, and its liner, closure and handling matter more than its outer print. Both should carry the product name, the grade, the lot code, the net weight and the retest date, and both should have a food-contact declaration for the destination market. ## Lead time and what starts the clock The catalog lead time is 1–7 days. The lead time is counted from the point at which the grade, quantity, pack, specification and document set are settled; an enquiry on its own does not start it. A pure grade in a 1 kg pouch is a different order from a 1% dilution in a 25 kg drum with a carrier declaration, even when both are described as biotin. Destination and documentation can move the date. A new market, a new label requirement or a customer-specific certificate format adds a review step before the pack is released. If the date is fixed, say so at the quotation stage and put the fixed date into the offer rather than assuming it will hold. ## The six details a quotation needs What to send so a biotin quotation can be complete | Detail | Why it changes the offer | Grade and carrier | Pure, 1%, 2% or granulated, and the carrier if diluted | Quantity and pack | 1 kg pouch, 25 kg drum or a multiple of either | Destination and Incoterm | Sets the delivery point, the documents and the transit route | Document set | COA, TDS, SDS, allergen, GMO, origin and any customer format | Label and declaration needs | Carrier name, grade name and the language of the pack label | Required date | Separates a standard release from a date that has to be reserved A quotation without these six is a starting point, not an offer. The response should come back with the specification, the pack, the lot or allocation basis, the document list, the delivery point and the validity of the quotation. If one of the six is missing, the supplier is guessing, and the guess will surface at the packing list. ## Samples and the retained sample A sample should be drawn from a released lot, carry the same lot code as the offer and be large enough for one bench trial and one repeat. It is not a separate production batch, and it does not reserve a drum. The sample is most useful when it is tested with the same methods the production lot will face: identity by IR, assay by HPLC, rotation, loss on drying and a blend trial at the intended inclusion. Keep a portion of the sample sealed and labelled. If a later drum is disputed, the retained sample is the reference that shows what the qualification was based on. The sample and the production lot should be traceable to the same manufacturing site, even when they are different lots. ## Terms that belong in the offer The commercial terms and the quality terms should be in the same document. The offer should state its validity, the Incoterm, the payment term, the document set, the agreed specification and the window for rejecting a non-conforming pack. It should also say what happens to the retained sample and how a re-test or a return is handled. “MOQ 1 kg” is a statement about the smallest pack, not a statement about the smallest commercially interesting order. A customer who needs 25 kg should still see the 1 kg option as the qualification step, and a customer who orders 1 kg should still receive the same certificate discipline as the drum. The minimum is there to make the first lot traceable, not to make the first order trivial. The catalog pack sizes and lead time sit on the biotin product page. The grade decision is on the grade page, the certificate lines on the COA page, the document set on the compliance page and the release workflow on the quality page. The ordering terms are defined in the MOQ and lead-time entries. ### 05 Where biotin is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/vitamins/biotin/compliance/ Reviewed: 2026-11-18 D-biotin is permitted in EU and UK food supplements and is a lawful dietary ingredient in the US, but permission is only the first check. The form, the contaminant ceiling, the nutrition declaration and the claim wording each need their own evidence, and the file has to answer all four for the destination market. In one linePermitted is not the same as compliant: the form, the contaminant ceiling, the label and the claim each need their own evidence. ## Three markets, four questions The EU regulates food supplements through Directive 2002/46/EC, which sets a positive list of vitamins and of the forms that may be used. The US regulates biotin as a dietary ingredient under the Federal Food, Drug, and Cosmetic Act as amended by DSHEA, with cGMP in 21 CFR 111 and the Supplement Facts panel in 21 CFR 101.36. The UK applies assimilated food supplement and labelling rules, with retained nutrition and claims references. In all three, the same four questions apply: is the exact form permitted, does the finished product meet the contaminant limits, does the label declare the nutrient in the right unit against the right reference value, and is the claim one that may be used for this product? ## The EU source list and the label Biotin appears in Annex II, Part A, entry 12(a) of Directive 2002/46/EC as D-biotin, and that is the form the file has to name. The Annex is amended by Commission regulation, so the entry should be checked against the current consolidated text as of this review. The nutrition declaration gives biotin in micrograms with the percentage of the nutrient reference value, 50 µg under Regulation (EU) No 1169/2011; a 100 µg portion is 200% of the NRV. The EU has not harmonised maximum levels for vitamins in supplements, and several member states set their own, so a multi-market product is checked market by market. The supplement particulars cover the food supplement name, the amount per portion, the NRV percentage, the daily-dose and keep-out-of-reach warnings and the varied-diet statement; the operator placing the product on the market carries the label responsibility. ## The US route is a different route Biotin is a lawful dietary ingredient. Biotin has been marketed as a dietary ingredient since before 1994 and is treated as a pre-DSHEA ingredient, so the NDI notification route does not apply; the manufacturer still has to meet 21 CFR 111 and the Supplement Facts rules. The daily value is 30 µg for adults and children four years and older, so a 100 µg serving is 333% of the daily value. The Institute of Medicine did not set a tolerable upper intake level for biotin in 1998, which is a statement about the evidence, not a licence to formulate without a limit. There is also no federal maximum level for lead, cadmium, mercury or arsenic in supplements. The cGMP rule still requires manufacture to specification, California Proposition 65 sets a lead dose level of 0.5 µg per day with a warning above it, and the calculation is on daily intake, not drum concentration. ## Contaminants and the specification Contaminant limits for a biotin food supplement, by market | Contaminant | EU | US | Lead | 3.0 mg/kg in food supplements | No federal limit; California Prop 65 applies | Cadmium | 1.0 mg/kg in food supplements | No federal limit for supplements | Mercury | 0.10 mg/kg in food supplements | No federal limit for supplements | Arsenic | No harmonised EU limit; national rules may apply | No federal limit for supplements The EU limits sit in Regulation (EU) 2023/915; the UK applies assimilated contaminants rules, and the current GB text should be checked. The catalog specification sets Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg: it meets the EU lead, cadmium and mercury limits and sets an arsenic figure where the EU has none. That specification is a buyer's choice, not a legal requirement. The micro limits, APC ≤1,000 cfu/g, yeast and mould ≤100 cfu/g and absence of E. coli and Salmonella, are also specification lines, and the certificate should name the method and the test portion. ## Where the claim boundary sits In the EU and the UK, only claims on the authorised register may be used, and each entry carries conditions of use. Biotin appears in the register, but the wording is not interchangeable with a paraphrase: the register text is the claim. The source-of threshold for a vitamin is 15% of the NRV in the daily portion, which is 7.5 µg of biotin against the 50 µg NRV. In the US, structure/function claims are permitted with the DSHEA disclaimer and the notification where it applies; disease claims are not. Nothing on this page is a claim about the ingredient, and a bulk technical document is safest when it makes no health claim at all. The buyer's label is where a permitted claim belongs. ## The file that travels with the lot Documents a biotin shipment should be able to produce | Document | What it has to show | Certificate of analysis | Lot, methods, limits, results and assay basis; rotation and LOD beside the assay | Specification and TDS | Grade, carrier, particle size, pack, storage and retest | SDS | Dust, moisture and handling precautions in the current format | Contaminant and micro statements | ICP-MS and plate counts, with methods and test portions | Allergen, GMO and irradiation statements | Declarations for the regulated allergens and process treatments | Origin and flow chart | Manufacturing site, carrier source and the steps that affect moisture | Food-contact declaration | The pouch, liner and drum are declared for the destination market | Stability summary | The pack, conditions and retest period behind the certificate date One line is easy to miss: biotin can interfere with immunoassays that use the biotin–streptavidin system. The US FDA issued a safety communication in 2017 and updated it in 2019; the effect depends on the sample concentration and the assay design and can push a result in either direction. The supplier's file should state the biotin content per portion and identify milligram-level formats, so the brand can decide on label and laboratory communication. That is a method and label fact, not a claim about the ingredient. ## Before the pack ships - The label name matches D-biotin in Annex II, the US dietary ingredient route and the UK list. - The nutrition declaration uses micrograms and the right reference value: 50 µg in the EU and UK, 30 µg in the US. - The dose has been checked against any national maximum and the product's own formulation limit. - The contaminant results meet the destination limit, with method and test portion named. - The carrier is declared and the grade is not described as pure material. - The claim text, if any, comes from the register or the notification with its condition of use. - The storage statement matches the pack and the stability summary. - The biotin-per-portion statement is in the file for the immunoassay communication. The market notes are on the EU, US and UK regulatory pages. The catalog specification is on the biotin product page, the certificate lines on the COA page and the identity tests on the identity page. ### 06 How we prove a biotin lot is D-biotin URL: https://nutrition.rainwoodbio.com/products/vitamins/biotin/identity/ Reviewed: 2026-11-18 A biotin lot is D-biotin only when four lines agree: the document chain, the IR spectrum, the HPLC assay and the specific rotation. The assay says how much material is present, the IR says it is the right molecule and the rotation says it is the right enantiomer. A certificate that reports only an assay has not proved identity, and a lot that passes the assay but fails the rotation is not D-biotin. In one lineThe assay says how much; the IR and the rotation say what, and only D-biotin passes both. ## Four layers of identity, and the balance The identity layers and the supporting mass balance | Layer | Test | What it proves | What it does not prove | Document | Name, CAS, lot, manufacturer and chain of custody | The certificate belongs to the pack | That the powder is the named substance | Fingerprint | IR against a reference spectrum | The functional-group pattern matches biotin | The amount, or which enantiomer is present | Amount | HPLC assay and retention time | The concentration and a chromatographic match | The D/L configuration; a co-eluting substance can pass | Configuration | Specific rotation, 2% in 0.1 M NaOH | The optical form is D-biotin | Purity on its own; the rotation is not an assay | Balance | Loss on drying and residue on ignition | The assay is consistent with the volatile and inorganic fraction | A separate identity; these are supporting numbers The layers are not interchangeable. IR is a fingerprint, not a purity test; HPLC is a quantitative method, not a chiral one; polarimetry is a configuration test, not an assay. A supplier who sends only the assay has sent one layer of four. ## The rotation ratio and the assay basis Specific rotation is an enantiomer ratio expressed as an angle. D-biotin rotates plane-polarised light to the right, and the catalog window is +89° to +93° at 2% in 0.1 M NaOH. A racemic DL-biotin would rotate near zero, and a substantially L-enriched lot would fall outside the window. A conventional achiral HPLC assay cannot separate D from L, so the rotation is the release test that answers the configuration question. The certificate should give the observed rotation, the concentration, the solvent, the temperature and the basis. A rotation without a temperature is not comparable with another laboratory's figure. The same discipline applies to the assay: the 97.5–102.0% window has to be tied to a dried basis or an as-is basis. An as-is result of 102.0% with 1.0% loss on drying would be about 103% on the dried basis, outside the window; both figures can be arithmetically right, but only one matches the specification as written. Read the assay with the loss on drying and the residue on ignition, not instead of them. The three numbers should reconcile within the method's uncertainty. A high assay with a high residue, or a low assay with a low loss on drying, is a prompt to ask what else is in the powder. ## When a solid-state method helps X-ray diffraction is not the routine release test for biotin; the catalog identity test is IR, and the rotation covers the configuration. XRD becomes useful when the IR is ambiguous, when a supplier claims a specific crystal form or solvate, or when a new source has to be compared with an established reference. The diffraction pattern is a fingerprint of the solid state, and a library match is evidence of similarity, not a quantification of purity. If XRD is used, ask for the source, the sample preparation and the detection limit for any minor phase. A pattern with no minor peaks is only as informative as the method's sensitivity. For a routine lot, the IR, HPLC and rotation are the working set; XRD is a targeted check, not a substitute for them. ## The routes that pass a weak assay Common identity and content failures, and the test that catches them | Route | What the certificate shows | Test that catches it | Dilution sold as pure | Assay near 1% or 2%, carrier visible in the IR | Assay plus IR plus content in mg/g | Under-assay material | Assay below 97.5% | HPLC against the specification | DL- or L-enriched biotin | Assay may pass; rotation falls outside +89° to +93° | Polarimetry | Related substance | Assay may pass; a co-eluting peak is invisible | Method review and impurity profile | Excess moisture | Loss on drying above 1.0% | Gravimetric loss on drying The commercial incentive is usually dilution, not a sophisticated forgery. A 1% blend sold as the pure grade has the appearance of a white powder and an assay that is obviously low only if the certificate is read. The second common failure is a pure-looking certificate with no rotation result, which leaves the enantiomer question open. Neither failure is caught by a single assay. ## How to write the identity lines Identity and release lines to write into a biotin specification | Line | Method | Limit or basis | Name and CAS | Document | D-biotin, CAS 58-85-5 | Identification | IR | Conforms to the reference spectrum | Assay | HPLC | 97.5–102.0% (state the basis) | Specific rotation | Polarimetry | +89° to +93° (2% in 0.1 M NaOH) | Loss on drying | Gravimetric | ≤1.0% | Residue on ignition | Gravimetric | ≤0.1% | Particle size | Sieve analysis | ≥95% through 80 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent The specification should say D-biotin, not just biotin, and it should state the basis for the assay and the rotation. If the material is a dilution, the pure-material window does not apply: the line becomes biotin content in mg/g, plus the carrier identity and a uniformity result. The grade and the carrier belong in the same document as the identity lines, or the reader cannot tell which product the limits describe. ## Five questions for a new supplier - Is the lot D-biotin, and what is the specific rotation, with the concentration and temperature? - Which HPLC method was used, with which detector and which assay basis? - Can you send the IR spectrum and name the reference standard it was compared with? - Is the material pure or a dilution, and if diluted, what is the carrier and the biotin content in mg/g? - Who manufactured the lot, and how does the lot code run from the certificate to the pack? The catalog identity lines sit on the biotin product page and the certificate is described on the COA page. The grade choice is on the grade page, the fill-weight arithmetic on the pure versus 1% page and the release workflow on the quality page. The IR and HPLC methods are described in the FTIR and HPLC notes. ### 01 What the COA for thiamine hydrochloride actually contains URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-b1/coa/ Reviewed: 2026-11-18 A thiamine hydrochloride certificate reports identity by infrared spectroscopy, assay by non-aqueous titration on the dried basis, the pH of the 2.5% solution, water by Karl Fischer, sulfated ash, the nitrate limit test, particle size, heavy metals and microbiology. Each line needs three things: the test, the method and the limit the lot was released against. The limits here describe the grade, not a drum; the batch COA is what confirms the lot you receive. In one lineThe certificate has to name the dried basis and the titration, report water and pass the nitrate test; without those four lines the assay number does not describe the salt. ## The certificate as a test report A certificate is auditable when each row can be read without the specification beside it. The identity row should name the reference standard, the assay row should name the titration and its equivalence, and the water and pH rows should name the method and the concentration. A range printed without a method is a claim, not a test report. Identity, assay and moisture · thiamine hydrochloride | Parameter | Method | Release limit | Appearance | Visual | White or almost white crystalline powder | Identification | Infrared, against a thiamine hydrochloride reference | Conforms | Assay | Non-aqueous titration, perchloric acid, potentiometric end-point | 98.5–101.5% on the dried basis | pH (2.5% solution) | Potentiometry | 2.7–3.3 | Water | Karl Fischer | ≤5.0% | Sulfated ash | Gravimetric | ≤0.1% | Nitrate | Limit test, ferrous sulfate ring | Passes test Physical, contaminant and microbiological limits | Parameter | Method | Release limit | Particle size | Sieve analysis | ≥95% through 40 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent ## What the assay measures, and on what basis The dried basis corrects the result for water, so 98.5–101.5% describes the anhydrous salt, not the powder as sold. Water is allowed up to 5.0%, and the two limits interact: a lot at 99.0% on the dried basis with 4.8% water carries about 94.2% thiamine hydrochloride as-is. The conversion is arithmetic, and the label dose has to be calculated from the as-is figure. The titration is the pharmacopoeial release method for the pure salt. Thiamine hydrochloride is dissolved in anhydrous formic acid with acetic anhydride and titrated with 0.1 M perchloric acid to a potentiometric end-point; 1 mL of titrant is equivalent to 16.86 mg of C12H17ClN4OS·HCl. The titration is fast and precise but not a separation: it measures thiamine salt equivalents, cannot see a degradant that still titrates, and is not the right method for a blend. HPLC with ultraviolet detection is the method that separates. It is used to confirm the assay when the material is in a premix, to resolve the impurity profile and to follow stability, because the degradation products that matter do not titrate like the parent. A certificate that says only “titration and HPLC” has not said which method produced which number. Ask for the method beside each result, and for the chromatogram when the peak purity is the question. The salt form is a separate question from the assay. A pure mononitrate read against the hydrochloride equivalence calculates at about 103%, outside the 98.5–101.5% window, but a blend of the two salts can land inside it. The assay narrows the question; the nitrate test, the pH and the infrared spectrum answer it. ## Release limit versus batch result The release limit is the acceptance boundary; the batch result is what the laboratory measured on the lot. They belong in separate columns. A result column filled with the specification range is not a result, it is a copy of the gate. For identity, nitrate and microbiology a pass or “conforms” entry is legitimate, provided the method is named; for assay, water, pH and sulfated ash the number itself should appear. Water is the result most often omitted and the one that changes the meaning of the lot. A certificate that reports 99.5% on the dried basis and no water figure cannot be converted to an as-is dose. Nitrate deserves the same attention: “passes” is the correct form for a limit test, but the report should name the test, and a buyer who wants a number should ask for the method and its detection limit rather than a percentage that the test does not produce. ## What moves between batches Water moves first because the hydrochloride is hygroscopic; drying time, the humidity in the packing room and the integrity of the liner all show up in the Karl Fischer result. The assay on the dried basis is comparatively tight, but its as-is value follows the water. pH moves with residual acid and with the drying step, and a drift towards the top of the 2.7–3.3 window is worth a question about the process rather than an automatic rejection. Colour is less quantitative and often more revealing. A white to almost white powder that arrives with a yellow tint may have seen heat, light or a trace of iron; the assay can still pass. Request the batch record and a re-test rather than accepting or rejecting on appearance alone. Particle size moves with milling and sieving. The catalog standard is at least 95% through 40 mesh, and an 80 mesh or granulated grade is a different physical article with its own flow and dust behaviour. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a disputed result, or a lot whose salt form is uncertain. The useful panel is not a full repeat: infrared against a thiamine hydrochloride reference, HPLC assay with an impurity profile, the nitrate limit test, chloride identity, Karl Fischer water and ICP-MS for the heavy-metal panel, all on one submitted sample. Ask the laboratory to report its detection limit for the nitrate test and the wavelength and column for the HPLC. A “not detected” line without a limit is evidence about the method's sensitivity, not about the sample. The sample tested should be the sample retained, and the lot code should follow it through the chain of custody. ## What to compare between suppliers Six lines to place side by side before two quotations are read as equal | Line | What the certificate should show | Salt and CAS | Thiamine hydrochloride, CAS 67-03-8; mononitrate is a different article, CAS 532-43-4 | Assay and basis | The percentage, the method and “dried basis” stated together | Water | A Karl Fischer result, not only the ≤5.0% limit | Counter-ion | Nitrate passes, and chloride identity where the pharmacopoeia requires it | Physical | pH, sulfated ash, particle size and the microbiological results | Traceability | Lot code matching the pouch or drum and the retained sample; manufacturer named Two quotations that agree on the assay but differ on water, nitrate and particle size are not describing the same powder. The catalog specification sits on the vitamin B1 product page; the salt comparison is on the grade page; the tests that separate the salts are on the identity page. The separation method is described in the HPLC method note, and the release workflow is on the quality page. ### 02 Thiamine HCl or mononitrate: choosing a vitamin B1 grade URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-b1/grades/ Reviewed: 2026-11-18 Vitamin B1 is sold as two permitted salts, thiamine hydrochloride and thiamine mononitrate. Both deliver the same thiamine cation, but the hydrochloride is 78.7% thiamine by mass and the mononitrate 81.1%, and the two carry different water limits, solubilities and hygroscopicity. The dosage form and the process decide which salt fits; this catalog is the hydrochloride, specified at 40 mesh, and the mononitrate would be a separate article. In one lineThe salt is chosen by the dosage form and the process, not by the assay number: hydrochloride where water is present, mononitrate where the powder must stay dry. ## The grade is the salt, not the percentage Both salts are pharmacopoeial articles with narrow assay ranges. Thiamine hydrochloride is specified at 98.5–101.5% on the dried basis, the mononitrate at 98.0–102.0% in the USP monograph, and both are white crystalline powders. The two ranges alone make the materials look interchangeable. They are not: the anion changes the mass fraction of thiamine, the water limit, the pH of the solution, the solubility and the way the powder behaves in a blender. The grade also includes the physical form. The standard is a crystalline powder with at least 95% through 40 mesh; an 80 mesh or granulated version is available on request and is a different article for flow, dust and blend uniformity. A grade is therefore a salt plus a particle size, not a purity band. ## The two salts side by side Thiamine hydrochloride and thiamine mononitrate · the differences that change a formula | Property | Thiamine hydrochloride | Thiamine mononitrate | Formula | C12H17ClN4OS·HCl | C12H17N5O4S | CAS | 67-03-8 | 532-43-4 | Molecular weight | 337.27 | 327.36 | Thiamine by mass | About 78.7% | About 81.1% | Assay, dried basis | 98.5–101.5% by titration | 98.0–102.0% (USP) | Water or loss on drying | ≤5.0% (KF) | ≤1.0% (LOD) | pH, dilute solution | 2.7–3.3 (2.5%) | Near neutral (about 6–8) | Water solubility | Freely soluble | Sparingly soluble | Behaviour in air | Hygroscopic; picks up water when open | Low hygroscopicity; stable as a dry solid The hydrochloride solution is acidic because the salt carries two chlorides; the mononitrate solution is close to neutral. That difference drives the choice in liquids and in any matrix whose pH is already near the range where thiamine is least stable. ## Converting between the salts Thiamine is the declared nutrient; the salt is the ingredient. The conversion is a mass fraction, not an assay result. One milligram of thiamine hydrochloride carries about 0.787 mg of thiamine, and one milligram of the mononitrate carries about 0.811 mg. To declare 10 mg of thiamine, a formula needs about 12.7 mg of the hydrochloride or about 12.3 mg of the mononitrate. Thiamine equivalent of the two salts | Salt | Thiamine per mg | Salt for a 10 mg thiamine claim | Thiamine hydrochloride | 0.787 mg | 12.7 mg | Thiamine mononitrate | 0.811 mg | 12.3 mg The arithmetic applies in reverse when a supplier quotes a salt weight against a thiamine label. A 10 mg certificate figure is a salt figure unless the basis says otherwise. Overages belong to the stability decision, not to the conversion. ## Water, heat and the process The hydrochloride is hygroscopic. Left open, it takes up water, and the water limit of 5.0% exists because the molecule can hold that much without failing the assay. The mononitrate is the low-hygroscopicity salt, with a 1.0% moisture limit, and it is the usual choice for dry premixes, direct-compression tablets and any blend that will sit in a hopper. In a dry blend the hydrochloride can cake, stall a feeder or transfer moisture to a sensitive partner. In solution the ranking changes. Thiamine is most stable in acid, and the hydrochloride keeps its 2.5% solution at pH 2.7–3.3, inside the stable range. The mononitrate sits near neutral, where the same molecule degrades faster, and a mononitrate solution that is heated will lose thiamine sooner than an acidic hydrochloride solution. The dry solid and the dissolved salt are two different stability questions, and a grade chosen on dry behaviour alone can disappoint in a beverage. Heat, sulfite and metal ions matter to both salts. Sulfiting agents cleave thiamine, copper and iron accelerate degradation, and a process that holds the material hot and wet is worse than a short dry blend. Choline chloride is a known incompatibility in premixes, and the hydrochloride is the more affected of the two salts. ## Which dosage form takes which salt Capsules and tablets usually take the mononitrate: the powder is less hygroscopic, flows better in a dry blend and does not pull water from the excipients. A hydrochloride tablet is possible, but the specification then has to control the room humidity, the excipient water and the compression step. Powder sticks and drink mixes sit between the two. The hydrochloride dissolves freely and gives a clear solution, which a drink mix wants, but it picks up water in an open hopper and the acidic taste is noticeable. The mononitrate is more forgiving in the dry blend and the hopper, but it dissolves more slowly in the glass. Gummies and chews are a water-and-heat process. The pH of the gummy mass, the cook temperature and the water activity decide the loss, and a salt that keeps the matrix acidic is an advantage. Functional beverages are the clearest case for the hydrochloride: a low-pH drink at pH 3–4 is already in the range where thiamine is most stable, and the salt dissolves without a carrier. ## What the label has to say In the EU, Annex II to Directive 2002/46/EC lists both forms as “thiamin hydrochloride” and “thiamin mononitrate”, and the ingredient list has to use the permitted name of the salt that is actually in the product. The nutrition declaration gives thiamine in mg and as a percentage of the nutrient reference value of 1.1 mg. In the US the Supplement Facts panel declares thiamine in mg against a Daily Value of 1.2 mg, and the ingredient list names the salt. The UK follows the retained permitted-forms list and a reference value of 1.1 mg. Switching the salt changes the ingredient name and the weight needed for the same thiamine claim. It does not change the declared nutrient or create a new claim. The brand's label review still has to confirm the wording, and this page makes no health claim for either form. ## What changes when the salt changes A salt switch is a specification change, not a substitution. The purchase order should name the salt and the CAS number, the assay and its basis, the water limit, the pH range, the counter-ion tests, the particle size and the microbiological limits. The dose calculation and the label artwork follow. A product already on stability needs data for the new salt in the final matrix, because the water and pH behaviour differ even when the thiamine claim is identical. The narrow comparison is on the hydrochloride versus mononitrate page; the full test sequence is on the identity page; the certificate lines are on the COA page. The product hub carries the catalog specification. ### 02.1 Thiamine HCl vs mononitrate: potency, water and the label URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-b1/grades/thiamine-hcl-vs-mononitrate/ Reviewed: 2026-11-18 Thiamine hydrochloride and thiamine mononitrate deliver the same thiamine cation in different packages. The hydrochloride is about 78.7% thiamine by mass and the mononitrate about 81.1%, so the same milligram of thiamine needs a different weight of each salt. The hydrochloride carries a 5.0% water limit and an acidic solution; the mononitrate carries a 1.0% water limit and a near-neutral one. The label has to name the salt that is in the drum. In one lineSame vitamin, different salt: 78.7% against 81.1% thiamine, a 5.0% against a 1.0% water limit, and a label that has to name which one is in the drum. ## Two salts, one vitamin The two commercial thiamine salts | Property | Thiamine hydrochloride | Thiamine mononitrate | Formula | C12H17ClN4OS·HCl | C12H17N5O4S | CAS | 67-03-8 | 532-43-4 | Molecular weight | 337.27 | 327.36 | Counter-ion | Two chlorides | One nitrate | Assay, dried basis | 98.5–101.5% by titration | 98.0–102.0% (USP) | Water or loss on drying | ≤5.0% (KF) | ≤1.0% (LOD) Both are permitted vitamin B1 sources in the EU, the US and the UK, and both are pharmacopoeial articles. The choice between them is not a question of which is more “natural” or more potent: it is a question of which salt survives the matrix and which one the label can name. ## The potency arithmetic The assay range does not tell a formulator how much thiamine is in a gram of powder. The molecular weight does. Thiamine hydrochloride is 337.27 g/mol against a thiamine cation of 265.36 g/mol, which gives 78.7% thiamine; the mononitrate is 327.36 g/mol, which gives 81.1%. The mononitrate is the more concentrated salt by about three percent, and that difference has to be worked into every dose. Converting a thiamine claim into salt weight | Declared thiamine | Thiamine hydrochloride | Thiamine mononitrate | 1 mg | 1.27 mg | 1.23 mg | 10 mg | 12.7 mg | 12.3 mg | 100 mg | 127 mg | 123 mg The same arithmetic runs in the other direction when a certificate reports a salt weight and the label declares thiamine. A certificate figure of 100 mg is a salt figure unless the basis says otherwise, and a supplier who quotes “100 mg thiamine” while shipping 100 mg of the hydrochloride is short by about 21% of the declared nutrient. The declared nutrient is thiamine; the weighed ingredient is the salt. Overages are a separate decision. A formula may add extra salt to cover loss over shelf life, but the overage is calculated on the measured stability of the matrix, not on the salt-to-thiamine conversion. Mixing the two calculations produces a label that is neither the declared dose nor the tested dose. ## Water and the physical form The water limit is the clearest physical difference. The hydrochloride is hygroscopic and its monograph allows up to 5.0% water; the mononitrate is the low-hygroscopicity salt and its moisture limit is 1.0%. A hydrochloride powder left open in a humid room gains water, cakes and changes its as-is potency. A mononitrate powder in the same room is far less affected, which is why dry premixes, tablets and fortified flours usually specify the mononitrate. Water also changes the assay arithmetic. A hydrochloride lot at 99.0% on the dried basis with 4.8% water carries about 94.2% salt as-is; the same lot at 1.0% water would carry about 98.0% as-is. The dried-basis result is the same, but the powder a formulator weighs is not. The mononitrate's tighter moisture limit makes the as-is figure more stable from lot to lot. The pack has to match the salt. The hydrochloride needs a moisture barrier and a short working exposure; the mononitrate is more forgiving but still needs a sealed pack. Neither salt should be stored in an open container in a dispensary, and neither should be judged by the appearance of the top layer of a drum. ## Stability follows the matrix In the dry state the mononitrate is the more robust solid: it is less hygroscopic and does not pull water into a blend. In solution the order reverses. Thiamine is most stable in acid, and the hydrochloride keeps its 2.5% solution at pH 2.7–3.3; the mononitrate sits near neutral, where the molecule degrades faster, especially with heat. A beverage at pH 3–4 therefore favours the hydrochloride on both solubility and stability, while a dry tablet favours the mononitrate on water alone. Heat, oxygen, light, copper and iron affect both salts, and sulfite cleaves both. Choline chloride in a premix is a known incompatibility, and the hydrochloride is the more affected form. The practical rule is that the salt choice and the process have to be tested together: a salt that is stable as a powder can still lose thiamine in a warm, wet matrix, and a salt that is stable in acid can still cake in a humid room. ## What the label has to say In the EU, Annex II to Directive 2002/46/EC lists “thiamin hydrochloride” and “thiamin mononitrate” as separate permitted forms, and the ingredient list has to use the name of the salt that is present. The nutrition declaration gives thiamine in mg and as a percentage of the 1.1 mg nutrient reference value. In the US, the Supplement Facts panel declares thiamine against a Daily Value of 1.2 mg and the ingredient list names the salt. The UK uses the retained permitted-forms list and a 1.1 mg reference value. Switching the salt changes two things on the label: the ingredient name and the weight of salt behind the same thiamine figure. It does not change the declared nutrient, and it does not create a claim. A label that says “thiamine hydrochloride” over a mononitrate lot is a labelling defect even when the thiamine number is correct. ## When to choose which - Acidic beverage or syrup at pH 3–4: the hydrochloride, for solubility and for the acidic pH it brings. - Dry tablet, capsule, premix or fortified flour: the mononitrate, for the lower water uptake and the tighter moisture limit. - Powder stick blended dry and dissolved by the consumer: either salt can work, but the hydrochloride dissolves faster and the mononitrate is more forgiving in the hopper. - Gummy or chew with a cook step: test both in the real matrix; the pH and the thermal load decide more than the salt name. - Existing label and stability file: the salt already named and tested is the default; a switch is a new specification and a new stability question. This catalog is the hydrochloride, 40 mesh. The grade page places the choice in the wider range; the stability page covers the matrix effects; the identity page shows how the salt is proved; the compliance page covers the permitted names; the product hub carries the specification and the pack sizes. ### 03 Thiamine is pH- and heat-sensitive; the matrix decides the shelf life URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-b1/stability/ Reviewed: 2026-11-18 Dry crystalline thiamine hydrochloride is stable in a sealed pack at room temperature. Once water is present, the molecule is sensitive to pH and heat: it is most stable in acid, degrades as the pH rises towards neutral, and is cleaved by sulfite. The matrix and the pack decide the shelf life, not the assay on the certificate. In one lineThe powder survives in a sealed pack; the matrix, the pH and the process decide whether the thiamine survives the shelf life. ## The dry powder Thiamine hydrochloride is a white crystalline powder with a water limit of 5.0%. That limit is generous because the salt is hygroscopic: an open pouch takes up moisture from the room, and the water that arrives is enough to change the as-is potency and to start caking. The pack is therefore part of the specification. The 1 kg foil pouch and the 25 kg fiber drum with a food-grade liner are moisture and light barriers, and they only work while they are closed. Storage is cool, dry and out of direct light. A dry powder at ordinary room temperature is not the difficult case; a powder that has been opened in a humid dispensary, left in a hopper overnight or packed warm is. The mononitrate is the lower-hygroscopicity salt and is the safer choice for a dry blend, but the hydrochloride is workable when the humidity and the exposure time are controlled. ## The dissolved salt Thiamine is most stable in acid, roughly pH 2–4. The hydrochloride keeps its 2.5% solution at pH 2.7–3.3, inside that window; the mononitrate sits near neutral, where the same molecule degrades faster. In a beverage or a syrup, the pH of the finished matrix matters more than the pH of the raw material, because a buffer can move the system into the range where the thiazolium ring opens and activity is lost. Heat accelerates every one of those reactions. A pasteurisation step, a cook step in a gummy or a warm hold tank gives the degradation more time and a higher temperature, and the loss is larger when the pH is high and the dissolved oxygen is high. Sulfite and bisulfite are a separate route: they cleave the thiamine molecule directly, so a formula that uses a sulfiting agent is a poor carrier for any B1 salt, whatever the assay on the drum. Oxygen, light and trace metals add to the loss. Copper and iron accelerate degradation at low concentrations, which is one reason a fruit-flavoured matrix with a mineral premix needs its own stability data. The dry salt is not exempt from heat, but the wet matrix is where the shelf life is usually decided. ## What moves the loss rate Factors that shorten thiamine shelf life, and the control that belongs in the formula | Factor | Effect | Control | pH above about 4–5 | Ring opening and loss of the thiazolium form | Buffer the matrix acidic; measure the finished pH | Heat | Faster degradation in solution and in wet solids | Shorten the thermal process; cool quickly | Water | Mobility for the reaction; caking in the powder | Sealed pack, low water activity, humidity control | Sulfite and bisulfite | Direct cleavage of the molecule | Choose a sulfite-free preservation route | Oxygen | Oxidative loss, especially in liquids | De-aerate, nitrogen-flush, low headspace | Copper and iron | Trace-metal catalysis | Control the mineral source and the contact surfaces | Light | Loss at the surface of solutions and powders | Opaque or amber pack; dark storage ## The stability protocol A stability programme borrowed from ICH Q1A is a reasonable model: accelerated storage at 40 °C and 75% relative humidity, long-term storage at 25 °C and 60% or 30 °C and 65%, and a matrix-specific condition for a product that will be chilled or held hot. The samples go into the final pack, not a laboratory jar, because the pack is one of the variables being tested. The assay has to be stability-indicating. Titration is the release method for the pure salt, but it cannot distinguish the parent from a degradant that still carries the titratable group; HPLC with ultraviolet detection is the method that follows the parent and the impurity profile. Water, pH, appearance and microbiology belong in the same protocol, and a gummy or a beverage needs its texture, colour and taste checked as well, because a product can pass the assay and still be unsaleable. Time points of 0, 1, 2, 3 and 6 months cover the accelerated arm; 0, 3, 6, 9, 12, 18 and 24 months cover the long-term arm. A matrix with a short commercial life can stop earlier, provided the data support the claim. Worst-case batches, the ones with the highest water and the lowest starting assay, are the batches that should enter the study. ## What the matrix does In gummies the risks are water activity, pH and the cook temperature together. A low-pH mass protects the thiamine, a high cook temperature costs it, and a residual sulfite from a fruit preparation can cleave it. The formula should fix the pH range and the thermal load, and the stability study should use the real process, not a laboratory bench mix. In beverages the pH is usually low enough to be friendly, but pasteurisation, dissolved oxygen and light are the loss routes. A clear bottle on a lit shelf is a different product from the same liquid in an opaque pack, and the stability data should match the pack that will be sold. Powder sticks are a dry matrix with a hygroscopic salt: the stick's moisture barrier and the humidity of the filling room are the variables. Tablets and capsules are the easiest case, but not a free one. Excipient water, choline chloride in a premix and trace metals from a mineral partner can all reduce the retained thiamine. An overage is a legitimate response only when the loss has been measured in that matrix; an overage chosen without data is a guess with a label attached. ## Assigning a shelf life The catalog specification has no shelf life. A shelf life is the period supported by the stability data for a defined matrix, pack and storage condition, and it is assigned to the finished product, not to the drum. The supplier's retest date on the raw material is a different number, and it applies while the material is stored in the original unopened pack. The output of the programme is a claim the brand can defend: a storage condition, a period, and the assay and appearance limits at the end of that period. If the data show the thiamine at the lower limit before the intended date, the options are a shorter date, a lower label claim, a formula change or a pack change, in that order of preference. The COA page shows the release figures the study starts from; the grade page covers the salt choice; the MOQ page covers the pack; the product hub carries the specification. The HPLC method note explains the assay the study depends on. ### 04 Vitamin B1: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-b1/moq/ Reviewed: 2026-11-18 Thiamine hydrochloride ships from a 1 kg minimum: one foil pouch drawn from a released lot, or a 25 kg fiber drum for production. The standard powder is at least 95% through 40 mesh, and 80 mesh or granulated material is made to order. Lead time is 1–7 days from order confirmation, and a quotation needs six details before it can be firm. In one lineOne kilogram drawn from a released lot is the qualification unit; the pack, the mesh and the destination shape the quotation. ## Why the minimum is one kilogram One kilogram is enough to run identity, assay, water, pH and a small formula trial, and it is small enough that a buyer can qualify a source before committing to a production quantity. The unit is not a sample sachet: it is a full pack drawn from a released lot, with the lot code on the label and on the certificate. That matters because a trial result is only useful if it belongs to the material that will be bought again. The next step is the 25 kg drum. A buyer who has qualified the 1 kg pack can order the drum from the same specification and, where the stock allows, the same lot. The minimum does not change the release testing: the lot is tested once, and the pack size is a packing decision rather than an analytical one. ## The packs Standard packs for thiamine hydrochloride | Pack | Net content | Typical use | What the label carries | Foil pouch | 1 kg | Qualification, lab trial, small batch | Product, salt, CAS, lot, net weight, storage | Fiber drum | 25 kg | Production, blending, tableting | The same fields, plus the drum number and the liner Both packs use a moisture and light barrier. The hydrochloride is hygroscopic, so the pouch is only protective while it is sealed; an opened pouch should be closed promptly and used within the working period the quality agreement sets. The drum has a food-grade liner, and the liner is part of the pack: a torn liner is a non-conformity, not a detail. A split, if one is agreed, should be a documented operation with its own label, lot reference and retained sample, because the identity of the material follows the label. ## How the lead time is counted The 1–7 day window starts when the order is confirmed, not when the enquiry arrives. A standard 40 mesh lot that is in stock and released moves quickly; a custom 80 mesh or granulated lot needs a milling or granulation step, and that step is scheduled after the order is confirmed. A destination outside the home market adds transit time, which is quoted separately from the production lead time. The documents travel with the shipment: certificate of analysis, technical data sheet, safety data sheet and the packing list. A market that needs an allergen statement, a non-GMO statement or a certificate of origin should say so before the order is confirmed, because those documents are prepared with the lot file. ## Six details a quotation needs - The salt and the article: thiamine hydrochloride, CAS 67-03-8, and the grade, so that a mononitrate quotation is not compared with a hydrochloride one. - The quantity and the pack: 1 kg pouch, 25 kg drum, or a documented split. - The particle size and the form: 40 mesh standard, 80 mesh or granulated. - The destination market and the documents required, including any customer-specific specification. - The delivery address and the delivery terms, so that transit and responsibility are clear. - The required certifications or statements, such as halal, kosher, non-GMO or an allergen statement. Six answers turn an enquiry into a specification. A request that names only “vitamin B1” leaves the salt, the mesh and the documents open, and a quotation built on that request is a range of possibilities rather than an offer. ## Samples and qualification A sample is drawn from the lot that will be supplied, not from a separate sample stock. The 1 kg pouch can serve as the sample, and the buyer should keep a retained portion under the same conditions as the production material. The lot code on the sample, the certificate and the production pack should match; if they do not, the trial has qualified a different material. The useful sample test list is short: identity by infrared, assay by titration with HPLC confirmation, water, pH, nitrate, heavy metals and micro. A buyer with a specific matrix should also run a small formulation trial, because the powder can pass every release test and still fail in a drink mix or a gummy. ## Terms that belong in the order The purchase order should incorporate the specification by reference and name the salt, the assay basis, the water limit, the pH range, the nitrate requirement, the particle size, the pack and the documents. The commercial terms, payment schedule and delivery terms are set in the quotation; they are not printed on this page. The order should also record the retest date, the storage condition and the quality agreement that governs a dispute. A complaint about a delivered lot needs a window and a route: the retained sample, the certificate and the packing record are the evidence, and the claim should be raised as soon as the non-conformity is found, before the lot is consumed. The COA page lists the release tests, the grade page explains the salt choice, and the compliance page lists the market documents. The product hub carries the catalog specification and the quality page describes the release workflow. ### 05 Where thiamine hydrochloride is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-b1/compliance/ Reviewed: 2026-11-18 Thiamine hydrochloride is a permitted vitamin B1 source for food supplements in the EU, the US and the UK. Permission is the first check: the file also has to show that the lot meets the specification, that the label uses the permitted name and units, and that any claim on the pack is one the market allows. A compliant lot with a non-compliant label is still a non-compliant product. In one lineThe form is permitted in all three markets; the file still has to show that the lot, the label and the claim agree. ## Four checks, three markets A market file is four checks: is the form permitted, does the lot meet the level and contaminant limits, does the label use the permitted name and units, and is the claim permitted? The three markets share the first answer and differ on the rest. This is a sourcing reference, not legal advice; the instruments can be amended, so check the current text before artwork. The permission route in each market | Market | Permission route | Main instruments | EU | Vitamin B1 source on the food-supplement positive list | Directive 2002/46/EC; Regulation (EU) No 1169/2011 | US | Dietary ingredient under DSHEA; GRAS affirmation for food use | 21 CFR 184.1875; 21 CFR 111; 21 CFR 101.36 | UK | Retained permitted-forms list for food supplements | Food Supplements (England) Regulations 2003 ## The EU route Directive 2002/46/EC lists the vitamins and the forms permitted in food supplements. Annex II, Part A, item 5 names “thiamin hydrochloride” and “thiamin mononitrate”, using the Directive's spelling. The hydrochloride is therefore on the positive list as a source, and the mononitrate is a separate entry. The route is the food-supplement list, not a novel-food entry, and the carrier must be a permitted food ingredient. Regulation (EU) No 1169/2011 sets the label: thiamine is declared in milligrams per portion and as a percentage of the nutrient reference value of 1.1 mg, with the supplement particulars and the daily-dose warning. The ingredient list uses the Annex II name of the salt that is actually present. Contaminants are governed by Regulation (EU) 2023/915, which sets lead at 3.0 mg/kg, cadmium at 1.0 mg/kg and mercury at 0.10 mg/kg for food supplements. There is no harmonised EU maximum for total arsenic in supplements, so the specification sets one. The EU does not harmonise maximum vitamin levels, so a member state can apply its own national rule. ## The US route In the United States, thiamine hydrochloride is a dietary ingredient under DSHEA and was marketed before 15 October 1994, so the pre-1994 route applies rather than a new dietary ingredient notification. For food use, 21 CFR 184.1875 affirms thiamine hydrochloride as GRAS, and 21 CFR 184.1878 covers the mononitrate. The finished supplement is made under 21 CFR 111, which requires identity testing of each component and supplier qualification. The Supplement Facts panel follows 21 CFR 101.36. Thiamine is declared in milligrams against a Daily Value of 1.2 mg, and the source is named in the ingredient list as thiamine hydrochloride. A structure/function statement needs the DSHEA disclaimer and must not be a disease claim. No federal lead maximum exists for supplements, so US buyers set their own and check state exposure rules such as California's Proposition 65. The supplier's certificate supports the buyer's identity test; it does not replace it. ## The UK route Great Britain retains a permitted-forms list copied from the EU lists and amended since. The Food Supplements (England) Regulations 2003, with parallel instruments in Scotland and Wales, list the vitamins and forms that may be used, and thiamin hydrochloride is on the list. The label carries the UK supplement particulars and a nutrient reference value of 1.1 mg. Contaminant limits were carried over at the EU values, and the GB claims register lists the permitted wording. Northern Ireland applies EU rules under the Windsor Framework, so a GB-only check is not enough for a product sold across the UK. Re-read the current text before the artwork is final. ## The limits in the file Catalog limits and the market note that belongs beside each | Parameter | Catalog limit | What the market file needs | Lead | ≤3 mg/kg | Result against the 3.0 mg/kg EU supplement limit; check any national or state rule | Arsenic | ≤2 mg/kg | No harmonised EU supplement maximum; the buyer sets the limit | Cadmium | ≤1 mg/kg | Result against the 1.0 mg/kg EU supplement limit | Mercury | ≤0.1 mg/kg | Result against the 0.10 mg/kg EU supplement limit | Water | ≤5.0% | Result and basis, because water changes the as-is potency | Nitrate | Passes test | Method and result; the nitrate test separates the hydrochloride from the mononitrate | Sulfated ash | ≤0.1% | Result, as an indicator of inorganic residue | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Method and result for each test These are catalog limits, not a statement that every market applies the same legal maximum. The certificate shows the result; the file maps it to the ceiling for the destination. The nitrate limit is a pharmacopoeial identity guard, not a contaminant ceiling. ## Where the claim boundary sits In the EU, Regulation (EC) No 1924/2006 and the EU Register govern claims. A claim may be used only if it is on the Register, matches its conditions of use and is not a disease claim. Authorised claims exist, but this page does not reproduce them; the brand's review decides whether one is available for its product and dose. In the US, a structure/function statement needs the DSHEA disclaimer and must not be a disease claim. In the UK, the GB register governs, and an EU-authorised claim is not automatically available in Great Britain. The ingredient name is not a claim: “thiamine hydrochloride” and “98.5–101.5%” are specification terms. This supplier makes no health claim, and the brand owner is responsible for every statement on the pack. ## The document set Documents a brand should hold for a thiamine hydrochloride lot | Document | What it should establish | Certificate of analysis | Lot code, assay and basis, water, pH, nitrate, sulfated ash, particle size, contaminants, micro | Technical data sheet and specification | Identity, CAS, formula, solubility, storage, particle size, pack, release limits and stability summary | Safety data sheet | Hazard classification, handling, transport | Manufacturing flow chart | The process, the solvents and the points of control | Allergen, non-GMO and origin statements | The status of the material, the carriers and the lot chain ## The pre-order checklist - The specification names thiamine hydrochloride, CAS 67-03-8, with the assay on the dried basis and a water limit. - The nitrate test is on the certificate, and the pack states the salt. - The contaminant results are compared with the destination's limits, not only the catalog. - The label names the Annex II form and declares thiamine in the required unit. - The claim, if any, is on the applicable register and is not a disease claim. - The lot code on the certificate matches the pack and the retained sample. The permitted forms and the label wording are covered on the grade page; the certificate lines are on the COA page; the salt tests are on the identity page. The market instruments are indexed in the EU regulatory note, and the product hub carries the catalog specification. ### 06 How we prove a thiamine lot is the hydrochloride URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-b1/identity/ Reviewed: 2026-11-18 A thiamine hydrochloride lot is identified in four layers: the documents and lot chain, the infrared spectrum against a hydrochloride reference, the assay and its chromatographic support, and the counter-ion evidence. The last layer separates the two salts. An assay on its own cannot, because both salts carry the same thiamine cation. In one lineThiamine is the same cation in both salts; identity comes from the counter-ion, the pH and the infrared spectrum, not from the assay alone. ## The four layers of identity What each identity layer proves, and what it does not | Layer | Evidence | What it proves | What it does not prove | Documentary | Name, CAS 67-03-8, formula C12H17ClN4OS·HCl, COA, lot code | The lot in the pack is the lot in the file | That the chemistry matches the file | Spectroscopic | Infrared spectrum against a thiamine hydrochloride reference | The solid is the hydrochloride salt | The quantity or the purity | Quantitative | Titration with HPLC confirmation | How much thiamine salt is present | Which counter-ion is present | Counter-ion | Chloride identity, nitrate test, pH, water | The salt is the hydrochloride, not the mononitrate | The absence of a mononitrate fraction below the test limit A certificate can describe a different lot; an infrared spectrum can belong to a diluted sample; a correct assay can sit on the wrong salt. Identity is the four layers agreeing. ## The infrared spectrum Infrared spectroscopy is the pharmacopoeial identification for thiamine hydrochloride, and the comparison has to be against a thiamine hydrochloride reference spectrum, not a generic thiamine spectrum. The two salts share the thiamine cation, so much of the spectrum is similar; the differences sit in the fingerprint region, where the counter-ion and the crystal environment absorb. The reference standard and the compared regions belong in the report. FTIR on a potassium bromide disc or an attenuated total reflectance accessory is acceptable if the method is stated and the reference is run under the same conditions. A spectrum with no reference is not an identification. The FTIR method note describes the preparation and the comparison. ## Titration and HPLC The release assay is a non-aqueous titration: the sample is dissolved in anhydrous formic acid with acetic anhydride and titrated with 0.1 M perchloric acid to a potentiometric end-point, with 1 mL equivalent to 16.86 mg of thiamine hydrochloride. The titration is precise and is the method named on the certificate. HPLC with ultraviolet detection is the separation method. It confirms the assay, resolves the impurity profile and follows stability, and its retention time against a thiamine standard is evidence that the main peak is thiamine. It is not evidence of the salt: the method sees the thiamine cation and is blind to the counter-ion, because both salts dissociate in the mobile phase. A pure mononitrate read against the hydrochloride equivalence calculates at about 103%, outside the 98.5–101.5% window; the nitrate and chloride tests catch a partial blend. ## The counter-ion evidence Four tests that separate the hydrochloride from the mononitrate | Test | Hydrochloride | Mononitrate | Chloride identity | White precipitate with silver nitrate, soluble in ammonia | Chloride below the monograph limit | Nitrate limit test | Passes; no brown ring at the interface | Fails; nitrate is the counter-ion | pH, dilute solution | 2.7–3.3 (2.5%) | Near neutral (about 6–8) | Water or loss on drying | ≤5.0% (KF) | ≤1.0% (LOD) The nitrate test is the most useful line for this product: a limit test, reported as passes or fails, that detects the nitrate the mononitrate carries as its anion. A hydrochloride certificate that omits it lacks the most direct check on the salt. ## The chloride-to-thiamine ratio Thiamine hydrochloride is a 1:1 salt: one chloride for each thiamine cation, and chloride is 10.5% of the formula weight of C12H17ClN4OS·HCl. The chloride result should therefore equal 10.5% of the assayed salt, not 10.5% of the sample weight. A lower figure, or a positive nitrate result, points to part of the powder being the mononitrate, which carries no chloride and about 81% thiamine against 78.7% for the hydrochloride. The ratio is a screen, not a release limit: it assumes the chloride is ionic and the assay complete, and it cannot see a mononitrate fraction that sits inside the 98.5–101.5% window. The nitrate limit test and the pH decide the lot. ## Why XRD is not the salt test Thiamine hydrochloride is crystalline, and its diffraction pattern differs from that of thiamine mononitrate, so a phase scan could separate the two solids. That is not the same as an identity test. The pattern needs a reference material, it does not quantify either salt, and it cannot see a mononitrate fraction that is amorphous or below the few-percent detection limit; it does not measure the counter-ion content of a crystalline blend. For release, the pharmacopoeial route is stronger: infrared against a thiamine hydrochloride reference, chloride identity, the nitrate limit test, pH and water, with the titration for quantity. XRD may help in a development study of solid forms, but it does not replace the nitrate test, which detects the counter-ion directly. ## The routes that pass a headline assay Routes that can survive an assay, and the test that catches each | Route | What still passes | What catches it | Mononitrate substituted or blended | Thiamine assay inside the range for a blend | Nitrate test, chloride identity, pH, water | Dilution with another B vitamin | A thiamine assay that is read against a nominal weight | HPLC impurity profile, infrared, assay against the declared weight | Dilution with an inorganic chloride | Chloride identity and a plausible pH | Assay, sulfated ash, water, mass balance | Oxidised or aged material | An assay near the floor | Colour, impurity profile, pH, stability history Each route satisfies the number that is easiest to check, so the defence is to specify the number and the evidence together: the salt and CAS, the infrared reference, the nitrate result, the chloride identity, the pH and the water. ## What to write into the specification - “Thiamine hydrochloride (C12H17ClN4OS·HCl), CAS 67-03-8; no thiamine mononitrate.” - “Assay 98.5–101.5% on the dried basis by non-aqueous titration; HPLC confirmation on request.” - “Water ≤5.0% by Karl Fischer; pH 2.7–3.3 in 2.5% solution.” - “Nitrate: passes the pharmacopoeial limit test; chloride identity positive.” - “Infrared spectrum conforms to a thiamine hydrochloride reference.” - “Particle size ≥95% through 40 mesh; heavy metals and microbiology as listed.” The wording matters because “vitamin B1” is a category, not an article: naming the salt, the CAS and the counter-ion tests leaves no room for a mononitrate delivery. ## Five questions for the supplier - Which salt is this lot, and what is the CAS on the certificate? - Does the certificate report the nitrate test, and what method was used? - Which reference standard was used for the infrared comparison? - Are the assay, water and pH from this lot, and on what basis is the assay reported? - Can you provide the HPLC chromatogram and the retained sample record for the lot? Five answers amount to an identity file. The COA page shows where each figure sits; the grade page compares the two salts; the compliance page covers the permitted names. The HPLC method note explains the separation, and the product hub carries the catalog specification. ### 01 What the COA for riboflavin actually contains URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-b2/coa/ Reviewed: 2026-11-18 The certificate for a riboflavin lot reports appearance, identification by IR and UV, assay by HPLC on the dried basis, loss on drying, residue on ignition, particle size, heavy metals and microbiology. Each row should carry the method and the release limit. The ranges here are the catalog specification; the batch COA confirms the particular lot, and the assay only means something when its basis and the identity lines are read with it. In one lineThe assay says how much riboflavin is in the lot; the dried basis, the identity lines and the colour say whether that number belongs to riboflavin. ## The certificate as a test report A certificate is useful when it can be audited line by line. Each parameter needs three things: what was measured, which method produced the number, and which limit the lot was released against. The tables below separate identity and purity from contaminants and microbiology, because different people read them and they fail in different ways. Identity, assay and purity · riboflavin | Parameter | Method | Release limit | Appearance | Visual | Yellow to orange-yellow crystalline powder | Identification A | IR spectroscopy | Spectrum conforms to the reference | Identification B | UV spectroscopy | Maxima and absorbance ratios conform | Assay (dried basis) | HPLC with UV detection | 98.0–102.0% | Loss on drying | Gravimetric | ≤1.5% | Residue on ignition | Gravimetric | ≤0.3% | Particle size | Sieve analysis | ≥95% through 80 mesh The identification block is not decorative. IR compares the fingerprint region with a reference spectrum; UV compares the absorption maxima and their ratios. Either can pass while the assay is low, or fail while the assay is inside the window, which is why the specification carries all three. The appearance line is part of identity too: a colour that has drifted is a reason to check the storage history before the assay. Contaminants and microbiology · riboflavin | Parameter | Method | Release limit | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent The heavy-metal panel is reported element by element, not as one “heavy metals” number, and the method should be named so its detection limits can be judged. The microbiological lines are release parameters as well; a clean assay does not excuse a failing plate count. ## What the dried basis and the HPLC line measure The assay is reported on the dried basis, so the result is corrected for the water measured by loss on drying. That matters because the specification caps loss on drying at 1.5%, and a lot at the top of that window carries more water than one at the bottom. The as-is figure is the dried-basis figure multiplied by one minus the loss on drying; the certificate should state the basis rather than leave the reader to convert. The 98.0–102.0% window is a pharmacopoeial-style purity window, not a statement that the powder can contain 102% riboflavin. The upper bound allows for the method, the reference standard and measurement uncertainty. A figure at the top of the window is not a more concentrated vitamin; it is the same material measured near the top of the same range. IR is the fingerprint test; UV measures the conjugated isoalloxazine chromophore, with maxima in the ultraviolet and visible range and characteristic absorbance ratios. The exact maxima belong in the method, not in a marketing line. HPLC separates riboflavin from related substances and from the phosphate ester, and the assay is calculated against a riboflavin reference standard. A certificate that names “HPLC” without the column, the detection wavelength and the basis has given a method name, not a method. ## Release limit versus batch result A release limit is the boundary for the lot; a batch result is what the laboratory measured. Both belong on the certificate, in separate columns, with the method beside them. A result column filled with the specification range is a copy of the gate, not a result. The same rule applies to appearance: “conforms” is a conclusion, and the descriptor it conforms to should be printed next to it. Appearance and identification are pass/fail, loss on drying and residue are ceilings, and the assay is a window. A result close to a limit is read with the trend across lots, not on its own. ## What moves between batches, and what the colour shows Riboflavin is made by fermentation or by synthesis, and both routes end in the same molecule. What moves between lots is less the assay, held in a narrow window, than the physical picture: crystal size and shape, shade of yellow, loss on drying, residue and trace metals. Milling and sieving set the particle size; drying and packing set the moisture. Colour is the most visible variable and the easiest to misread. Yellow to orange-yellow is the normal range, and the shade varies with crystal size and with the light the powder has seen. A dull or brown tint is not a normal shade; repeat the assay and check how the lot was stored and packed. Under 365 nm light, a thin layer should show a strong yellow-green glow; a weak glow points to dilution, degradation or a different material. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a form claim the certificate does not prove, or a disputed result. The useful panel is not a full repeat: HPLC assay with peak purity, IR and UV identity, loss on drying and residue, ICP-MS for the heavy-metal panel, and the microbiological set, all on one submitted sample. If the phosphate form is possible, add a phosphate assay or a second HPLC method that separates the ester. Ask the laboratory to report its detection limit for each contaminant. A “not detected” line without a limit is evidence about the method's sensitivity, not about the sample. Chain of custody matters as well: the sample tested should be the sample retained, and the lot code should travel with it. ## What to compare between suppliers Put six lines side by side: form and CAS number; assay method and basis; loss on drying; residue on ignition; particle size; and the colour and fluorescence description. Two quotations that match on assay but diverge on the other five are not describing the same powder. The second layer is lot traceability. The lot code should match on the certificate, the pouch or drum and the retained sample. The certificate should say who manufactured the lot, which route was used and when it was packed; a correct certificate can still belong to a different drum. Ask for the COA of the lot being shipped, not a representative certificate from a previous campaign. The catalog specification sits on the riboflavin product page. The two forms are compared on the grade page, the tests that separate them on the identity page, and the release workflow on the quality page. The HPLC method note describes the assay, and the loss-on-drying entry defines the basis arithmetic. ### 02 Riboflavin or riboflavin 5-phosphate: choosing a vitamin B2 grade URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-b2/grades/ Reviewed: 2026-11-18 Vitamin B2 is sold in two supplement forms: riboflavin (CAS 83-88-5), a yellow crystalline powder that is only slightly soluble in water, and riboflavin 5'-phosphate sodium (CAS 130-40-5), a freely soluble salt that carries about 73–79% riboflavin on the dried basis. The two are separate label ingredients with separate specifications and separate content calculations. Within riboflavin itself, the grade question is particle size and granulation; the dosage form and the label decide which one to buy. In one lineThe grade is not a purity ladder: riboflavin and riboflavin 5-phosphate are different label ingredients, and the mesh is a separate decision. ## Why the two forms are not interchangeable Vitamin B2 is a nutrient name, not a single specification. In the EU, Annex I to Directive 2002/46/EC lists the permitted forms as riboflavin and riboflavin 5'-phosphate sodium; the UK schedule carries the same pair; in the US, the Supplement Facts source line names the form after “as”. A certificate that says only “vitamin B2” leaves the form open, and the form is the part that changes the ingredient list, the solubility and the mass of powder that delivers a given amount of riboflavin. The 98.0–102.0% and 73.0–79.0% figures are not two grades of the same purity. Riboflavin is assayed as riboflavin; the phosphate salt is assayed as its riboflavin content after allowing for the phosphate, the sodium and the water of crystallisation. A figure in the middle of that window is a normal, in-specification result, not a diluted riboflavin. Reading the two windows as a ranking is the most common mistake in a B2 comparison. The phosphate group at the 5' position is what makes the salt soluble, and what makes it a different molecule with a different CAS number, molecular weight and label name. Neither form is a “more active” version of the other; the vitamin is the same isoalloxazine ring in both. ## The two forms side by side Riboflavin and riboflavin 5'-phosphate sodium · form comparison | Property | Riboflavin | Riboflavin 5'-phosphate sodium | CAS number | 83-88-5 | 130-40-5 | Molecular formula | C17H20N4O6 | C17H20N4NaO9P (anhydrous) | Molecular weight | 376.37 g/mol | 478.33 g/mol anhydrous; 514.36 g/mol dihydrate | Riboflavin content | 98.0–102.0% on the dried basis | 73.0–79.0% on the dried basis | Water solubility | Slightly soluble, about 0.08 g/L at 25 °C | Freely soluble | Solution appearance | Yellow-green with strong fluorescence | Yellow with green fluorescence | Label name | Riboflavin | Riboflavin 5'-phosphate sodium | Typical format | Capsule, tablet, dry blend, suspension | Stick pack, liquid, clear beverage The molecular weights explain the content gap: riboflavin is 376.37 g/mol, the anhydrous phosphate sodium salt is 478.33 g/mol, and the dihydrate is 514.36 g/mol. The phosphate and the sodium add mass that is not riboflavin, so one gram of the salt delivers less than one gram of the vitamin. ## Solubility, crystal and mesh Solubility is the first practical difference. Riboflavin dissolves to about 0.08 g/L at 25 °C, so a clear beverage at a normal vitamin amount is a slow dissolution problem rather than an impossible one; the crystal dissolves slowly, and fine particles or the phosphate salt are the usual answers. The phosphate sodium salt is freely soluble and can be held as a concentrated stock, which is why it appears in stick packs and liquids. Both solutions are yellow with a green fluorescence, and both are light-sensitive. The physical grade of riboflavin is set by milling and sieving. The catalog powder is ≥95% through 80 mesh; a 100 mesh milled grade and a granulated grade are available on request. The coarse powder blends well, the finer grade disperses faster, and the granulated grade flows better and makes less dust. None of these changes the assay or the label. Colour is part of the physical picture. Riboflavin is an intense yellow at low concentration, and the shade varies from yellow to orange-yellow; the phosphate salt is also yellow to orange-yellow and is more likely to take up moisture. A granulated or milled grade can look different without being out of specification. ## Which dosage form fits which A capsule or tablet is the natural home of crystalline riboflavin. The amount per unit is small, so blend uniformity and colour are the practical issues, and an 80 mesh powder with a granulated option covers most processes. A coating can carry the colour, but it does not protect the powder inside from light; the pack does that. A stick pack, a drink mix or a ready-to-drink beverage is easier with the phosphate salt. It dissolves without a suspension step, and a clear liquid stays clear. If crystalline riboflavin is used in a liquid, the product is a suspension: it has to be shaken, and the particles may settle. A gummy can use either form; the salt is easier in the water phase, the crystal easier to dry-blend. The dosage form also sets the overage. Riboflavin is lost at the surface of a clear pack and in a hot process, so the label amount and the formula amount are not the same number; the overage should come from stability data, not a rule of thumb. ## What changes when you switch, and how to write it Write the form before the assay. A riboflavin specification names the molecule and the CAS number, then the assay method and basis, then the physical and contaminant lines: “Riboflavin, crystalline, CAS 83-88-5; assay 98.0–102.0% by HPLC on the dried basis; loss on drying ≤1.5%; residue on ignition ≤0.3%; ≥95% through 80 mesh; heavy metals and microbiology as agreed.” A phosphate specification is a different document: “Riboflavin 5'-phosphate sodium, CAS 130-40-5; assay 73.0–79.0% as riboflavin on the dried basis”, plus water content and solubility. Switching forms changes four things at once: the ingredient name, the formula mass, the solubility of the blend and the colour intensity in the finished product. It does not change the vitamin name on the front of the pack, which is why the switch is easy on paper and hard to defend in an audit. The label and the certificate have to name the same form. For the same riboflavin content, the phosphate salt adds mass: the anhydrous salt needs about 1.27 times the mass of riboflavin, the dihydrate about 1.37 times. The exact figure comes from the batch COA, because the assay and water content vary within the specification. The catalog specification sits on the riboflavin product page. The narrow comparison is on the riboflavin versus R5P page; the assay basis is on the COA page; the label rules are on the compliance page; the release test is in the HPLC method note. ### 02.1 Riboflavin vs riboflavin 5-phosphate: solubility, dose and label URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-b2/grades/riboflavin-vs-r5p/ Reviewed: 2026-11-18 Riboflavin and riboflavin 5'-phosphate sodium are both vitamin B2 on a label, but they are different salts with different solubility, different molecular weight and different content per gram. Riboflavin is only slightly soluble in water and suits capsules, tablets and suspensions; the phosphate sodium salt is freely soluble and suits stick packs, liquids and clear beverages. The switch changes the ingredient name, the formula mass and the label, not just the dissolution step. In one lineThe phosphate form buys solubility and pays for it in formula mass and a different label name. ## Two forms, two CAS numbers Riboflavin is the free vitamin, CAS 83-88-5, formula C17H20N4O6, molecular weight 376.37 g/mol. Riboflavin 5'-phosphate sodium is the phosphate ester at the 5' position, isolated as the monosodium salt, CAS 130-40-5; the anhydrous salt is 478.33 g/mol and the dihydrate 514.36 g/mol. The phosphate and the sodium are why the salt dissolves, and why the two are separate label ingredients: the EU and UK lists name them as two entries under vitamin B2, and the US Supplement Facts source line names whichever form is used. A certificate that says “vitamin B2” without the form has not described either one. The salt is not a more active vitamin. The isoalloxazine ring is the same in both; the difference is the group on the ribityl chain, which changes solubility, mass and label. A higher assay number does not make riboflavin the better form, and a lower number does not make the salt weaker. ## Solubility is the practical difference Riboflavin dissolves to about 0.08 g/L at 25 °C. A clear beverage at a normal vitamin amount is a slow dissolution problem rather than an impossible one: the amount per serve can sit below the equilibrium solubility, but the crystal dissolves slowly, and fine particles or the phosphate salt are the usual answers. In a capsule or tablet, solubility hardly matters. The phosphate salt is freely soluble and can be held as a concentrated stock, which is why it appears in stick packs, drops and ready-to-drink beverages. Both solutions are yellow with green fluorescence, and both are light-sensitive, so the salt does not remove the need for an opaque pack. Riboflavin and riboflavin 5'-phosphate sodium · the lines that change | Property | Riboflavin | Riboflavin 5'-phosphate sodium | CAS number | 83-88-5 | 130-40-5 | Molecular weight | 376.37 g/mol | 478.33 g/mol anhydrous; 514.36 g/mol dihydrate | Riboflavin content | 98.0–102.0% on the dried basis | 73.0–79.0% on the dried basis | Water solubility | About 0.08 g/L at 25 °C | Freely soluble | Typical format | Capsule, tablet, dry blend, suspension | Stick pack, liquid, clear beverage | Label name | Riboflavin | Riboflavin 5'-phosphate sodium ## Content conversion and the label amount The label declares riboflavin, not the mass of the salt. To deliver a stated amount from the phosphate salt, divide by its riboflavin content: 376.37 divided by 478.33 is about 0.787 for the anhydrous salt, and about 0.732 for the dihydrate. A certificate in the middle of that range gives a slightly different divisor, and the certificate figure is the one to use. For example, 1.4 mg of riboflavin needs about 1.78 mg of anhydrous salt at the stoichiometric factor, or about 1.84 mg at a certificate figure in the middle of the range. The same 1.4 mg from riboflavin is 1.4 mg of riboflavin, subject to assay and overage. The overage is separate. It should come from stability data for the finished product and pack, not from the molecular weight; a clear beverage in a clear bottle needs a different overage from an opaque capsule, and solubility does not change light sensitivity. Both assays need the same basis: riboflavin at 98.0–102.0% on the dried basis, the salt at 73.0–79.0% as riboflavin on the dried basis. If one is as-is and the other dried, the conversion is wrong by the water content. ## Which dosage form fits which A capsule or tablet is the natural home of crystalline riboflavin. The amount per unit is small, so blend uniformity and colour are the issues, and an 80 mesh powder with a granulated option covers most processes. The salt can be used, but it brings sodium and phosphate into the formula and is more hygroscopic. A stick pack, a drink mix or a ready-to-drink beverage is easier with the phosphate salt, because it dissolves without a suspension step and a clear liquid stays clear. A gummy can use either form; the salt is easier in the water phase, the crystal easier to dry-blend. A suspension is the one liquid format where crystalline riboflavin is natural: the powder is dispersed, the label says to shake, and the particle size is set for uniformity. A 100 mesh milled grade is available on request. A clear drink made with crystalline riboflavin is a suspension that has not been labelled as one. ## What the label must say In the EU and the UK, the ingredient list names the form and the nutrition declaration gives the amount as a percentage of the 1.4 mg nutrient reference value. In the US, Supplement Facts gives the amount in mg and the percentage of the 1.3 mg Daily Value, and the source line names the form after “as”, for example “Riboflavin (as riboflavin 5'-phosphate sodium)”. The pack, the certificate and the specification must name the same form. Claims are a separate layer: only claims on the authorised list, with their conditions and wording, and a US structure/function claim needs the DSHEA disclaimer without becoming a claim about a medical condition. This page does not repeat claim wording. The ingredient name is not a claim, but “5'-phosphate” implies a form, and the form has to be the one tested. The colour is a label fact too. Riboflavin is an intense yellow and the salt is also yellow; in a clear beverage the colour is visible, and in a white capsule it tints the product. If the colour is part of the design, the form and the amount are part of that decision. ## When to choose which Choose riboflavin for a dry dosage form — a capsule, a tablet, a powder blend or a suspension — where the label says riboflavin and the formula does not need a dissolved vitamin. Choose the phosphate salt for a clear liquid, a stick pack, a drop or a concentrate, where solubility is the constraint and the label can name the salt. Choose neither until the label question is settled. Do not switch forms to chase an assay number. The 98.0–102.0% and 73.0–79.0% windows measure different things, and the second is not a lower grade of the first. Do not switch without changing the label, and do not accept a certificate that names one form for a pack that names the other. The product page carries the catalog specification, the grade page covers the wider comparison, the compliance page covers the market rules, and the COA page shows how the assay basis is reported. ### 03 Riboflavin is light-sensitive; the pack decides the shelf life URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-b2/stability/ Reviewed: 2026-11-18 Riboflavin is a light-sensitive vitamin. The dry crystal is the stable form, but light, heat, oxygen and pH act on it in solution, and a clear pack exposes the powder or the drink to the stress that matters most. The pack, the closure and the storage statement decide the shelf life, not the assay on the release certificate. In one lineA sealed, opaque pack protects riboflavin; light, water and an alkaline pH are what shorten its shelf life. ## The dry crystal is the stable form The dry crystal is the form to keep. Riboflavin is a crystalline powder with a loss on drying of no more than 1.5%, and in a closed, opaque pack at ambient temperature it is expected to hold its assay for the shelf life assigned to that pack. Heat alone is less damaging to the solid than to a solution, but a hot warehouse and a cold night produce condensation, and condensation is water. Moisture raises the loss on drying, softens the powder and can cake it; a caked drum is a handling problem even when the assay passes. Light acts on the solid more slowly than on a solution, but it still acts. A thin layer of powder on a shelf or in a clear jar will fade at the surface, and the shade of the pack can shift after repeated exposure. The dose room, the hopper and the open pouch are part of the storage story, not only the warehouse. ## In solution, light and pH take over In solution, the picture changes. Riboflavin absorbs visible and ultraviolet light, and the excited molecule can break down through several routes; the result is a loss of the yellow colour and of the fluorescence, and a change in the UV spectrum. The rate depends on the matrix, the light source, the exposure time and the pH. pH selects the route. In alkaline solution the ribityl side chain is lost and lumiflavin forms; in acid solution the product is lumichrome. Both are degradation products with different colours and spectra, and both take riboflavin out of the assay. A beverage that drifts alkaline in storage is a different risk from one that stays acidic, even if both start with the same amount of vitamin. Oxygen adds a second route. Photo-excited riboflavin can generate reactive oxygen species, so light exposure in an oxygenated solution can oxidise riboflavin itself and other actives in the formula. A nitrogen flush, a low headspace and an opaque pack reduce the opportunity; an antioxidant can help if it is compatible with the rest. Heat accelerates these reactions, and a hot fill is harsher than a cold fill. ## The factors and the controls Read the factors together. A clear bottle in a warm warehouse combines light, heat and oxygen; an opaque carton in a cool store removes most of the light and some of the heat. The table lists the stresses and the controls that belong in the specification and the pack design. Stability factors · riboflavin in powder and in solution | Factor | What it does | Control | Light, UV and visible | Photodegradation, colour fade, loss of fluorescence | Opaque foil, amber glass, carton, light-tight drum | Heat | Faster degradation in solution; caking in powder | Cool storage, cold fill, controlled process time | Oxygen | Photo-oxidation of riboflavin and neighbouring actives | Nitrogen flush, low headspace, compatible antioxidant | pH | Alkaline route to lumiflavin; acid route to lumichrome | Buffered matrix, pH checked at release and in storage | Moisture | Caking, higher loss on drying, microbial risk | Foil pouch, sealed drum, dry handling ## A stability protocol for the market pack A stability protocol should use the market pack, not a laboratory jar. Fill the actual pouch, bottle or stick, store it at the long-term condition for the market — 25 °C/60% RH for moderate climates, 30 °C/65% RH for hot, humid zones — and add an accelerated condition at 40 °C/75% RH. Test at 0, 3, 6, 9, 12, 18 and 24 months, and continue to 36 months if the shelf life needs it. At each point measure assay on the dried basis, loss on drying, appearance, colour and the microbiological set. Light needs its own study. ICH Q1B exposes the sample to visible and ultraviolet light with a dark control, and the result should be read against the pack that will be sold, not a clear vial. A study on a clear vial tells you the molecule is sensitive; it does not tell you the opaque pack works. The report should state the exposure, the pack and the loss at each condition. ## What the formula does to the colour In a premix, riboflavin's colour is strong enough to tint the whole blend, and the tint is an early warning: a premix that has faded or browned has seen light or heat. In a tablet, the film coat can block some light, but the blister or the bottle still has to do the rest. In a gummy, water activity, pH and cooking temperature all bear on the loss, and the colour is part of the release check. In a beverage, the pack is the formula. A clear PET bottle shows the colour and lets the light in; an amber bottle, a carton or a foil pouch blocks most of it. The phosphate form is easier to dissolve, but it is not more light-stable than riboflavin. Fading, browning or a shift in fluorescence means the assay should be repeated and the storage history reviewed. ## The shelf life belongs to the pack Shelf life belongs to the pack. The material has a retest date, the closed pack has a shelf life, and the opened pack has an in-use period; the three are not the same number. The number on the specification applies to the closed pack stored as stated, and it is assigned from real-time data for that pack. Accelerated data can support the assignment, but it does not replace the real-time point when the claim is made. Repacking resets the question. A kilogram transferred from a foil pouch into a clear jar is a new pack with no data and no light protection; the shelf life of the original pouch does not travel with the powder. If the pack changes, the stability work changes with it. Ask the supplier for the pack specification, the closure, the real-time data and the photostability report. The COA page shows where the release values sit; the compliance page covers the storage statement; the product page lists the catalog packs. The HPLC method note covers the assay the study repeats. ### 04 Vitamin B2: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-b2/moq/ Reviewed: 2026-11-18 The catalog minimum is 1 kg, packed as a foil pouch; production quantities ship in 25 kg fiber drums. The 1 kg unit is drawn from a released lot and is large enough for identity testing, a bench trial and a first formula run. The catalog lead time for a released lot is 1–7 days, and the quotation is built from six details about the material, the pack and the destination. In one lineOne kilogram from a released lot is the qualification unit; the pack, the documents and the destination turn it into an order. ## Why the minimum is one kilogram The minimum is a commercial unit, not a retail pack. A kilogram is enough to identity-test the material, run a bench trial, check the blend behaviour and keep a retained sample, and it is small enough to be drawn from a single released lot. That last point is the reason for the number: a smaller split would either break the lot identity or leave no sample for the file. Below 1 kg, the request is a laboratory sample rather than a catalog line. Ask with the tests you intend to run and the quantity the trial needs; the answer depends on the lot and the document set, and it is handled as a separate request. Above 1 kg, the same material is available in the 25 kg drum, and the drum is the production unit. The minimum is not a barrier to qualification: a brand can test the material and run a trial batch without committing to a drum. The 1 kg pouch and the 25 kg drum carry the same specification; the difference is the pack and the handling. ## Packs and what they protect Riboflavin is light-sensitive and takes up moisture, so the pack is part of the specification. The foil pouch is opaque and moisture-resistant; the fiber drum is rigid enough to protect the powder in transit. Catalog packs · vitamin B2 | Pack | Typical use | What it protects | 1 kg foil pouch | Sample, bench trial, small batch | Light and moisture; single-lot traceability | 25 kg fiber drum | Production batch | Light, moisture and handling in transit Keep the pack closed between uses and do not transfer the powder into a clear jar. A clear container gives up the light protection that the foil was chosen for, and an open drum gives up the moisture protection. If the material is repacked, the new pack needs its own specification and its own stability data. Every pack carries the product name, form, net mass, lot code and storage statement. The lot code links the pack, the certificate and the retained sample; if the three do not match, the paperwork describes a different material. ## Lead time and what can move it The catalog lead time is 1–7 days for a released lot. The range covers the difference between a pack that is already on the shelf and one that has to be drawn, labelled and documented; it is not a promise for every destination. A new pack size, a customer-specific test panel, a certificate legalisation or a destination with import formalities can add time, and those should be discussed before the order is confirmed. Lead time is counted from order confirmation and document approval, not from the first email. If label artwork or the specification has to be approved, that belongs in the schedule. Ask for the ship date and the document date separately; a lot can ship before the certificate is issued, and that gap matters at the border. ## The six details a quotation needs A quotation is only comparable when it is built on the same six details. Send them together, and the reply can be checked against another supplier line by line. What to send with a vitamin B2 quotation request | Detail | What to state | Why it matters | Form and specification | Riboflavin or riboflavin 5'-phosphate sodium, mesh, any customer test | Different material, different CAS number and different assay basis | Quantity and pack | Total quantity, 1 kg pouch or 25 kg drum, pack split | Sets the lot, the packing and the handling | Destination and terms | Country, city, Incoterm, consignee | Sets the route and the documents | Label and artwork | Language, net mass, lot format, any customer label | A label change can change the packing step | Documents and testing | COA, SDS, allergen statement, third-party test, certificates | Defines the file that ships with the lot | Sample or commercial | Trial quantity or production order, required date | Separates a sample request from a stock allocation Do not send a quantity alone. “One drum of vitamin B2” can mean either form, either mesh and either document set, and the reply will be a guess. The six lines above turn the enquiry into a quotation that can be compared. ## Samples and qualification A 1 kg pouch can serve as the sample for a qualification programme. Test identity by IR and UV, assay by HPLC on the dried basis, loss on drying, residue, mesh, colour and fluorescence; then run the material in the intended blend or solution and check the colour and the uniformity. Keep a retained sample from the same pouch and record the lot code. A sample is not a shelf-life study. The pouch is a pack, but one pouch kept on a bench does not answer the question for a pallet in a warehouse. If the sample is used to choose a supplier, ask for the stability data on the production pack as well. When the trial ends, compare the sample's certificate with the production lot's. The specification should be the same revision, and the lot code should be the one sampled; a sample from one lot and a shipment from another are two qualifications. ## Terms that belong in the order The purchase order should reference the specification revision and the pack, not only the product name. It should state the quantity, the lot code or the lot allocation, the documents that ship with the lot, the Incoterm and the delivery address. If the order is for a customer-specific label, the approved artwork belongs in the file. Payment terms, delivery terms and the document set are stated in the quotation and confirmed in the order. Retention of the lot record and the retained sample should be agreed at the same time; a sample that is discarded after shipment cannot settle a later dispute. Any deviation from the specification should be written and accepted before shipment, not discovered on arrival. The product page lists the catalog packs and lead time; the COA page shows what ships with the lot; the compliance page lists the documents a market may ask for. The logistics page covers the shipping side, and the quality page covers release and retention. ### 05 Where riboflavin is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-b2/compliance/ Reviewed: 2026-11-18 Riboflavin is permitted as a vitamin source in food supplements in the EU, the US and the UK, and the phosphate sodium salt is permitted alongside it in the EU and UK lists. Permission is the first check, not the whole file: contaminant limits, labelling, the claim wording and the lot documents are separate checks. This page sets out what each market requires and what a supplier file must show; verify the current text before launch. In one lineThe permitted form, the contaminant ceiling, the label and the claim are four different checks, and each market answers them in its own instrument. ## Three markets, four questions All three markets allow riboflavin, but they organise the permission differently. The EU and UK work from a positive list of vitamin forms; the US works from the dietary-ingredient definition and the Supplement Facts label. In all three, the nutrient use and the colour use are separate permissions. Vitamin B2 · the instrument behind each market | Market | Form list | Label basis | EU | Directive 2002/46/EC, Annex I | Regulation (EU) No 1169/2011; riboflavin NRV 1.4 mg | US | Dietary ingredient under DSHEA | 21 CFR 101.36 Supplement Facts; riboflavin DV 1.3 mg | UK | Food Supplements Regulations 2003, Schedule 2 | Retained nutrition labelling; riboflavin NRV 1.4 mg The UK position is retained EU law with its own amendments, and the GB claims register is separate from the EU register. Northern Ireland follows the EU rules under the Windsor Framework, so a UK launch needs the destination checked, not only the language. Both lists name the same two forms. Riboflavin also has a colour-additive entry: E101 in the EU and 21 CFR 73.450 in the US. That entry is not the permission for the nutrient use in a supplement; relying on one entry for the other function mixes two rules. ## EU: permitted form, NRV and contaminants Annex I to Directive 2002/46/EC permits riboflavin and riboflavin 5'-phosphate sodium in food supplements. The nutrition declaration gives riboflavin as a percentage of the 1.4 mg nutrient reference value, and the ingredient list names the form used. The “food supplement” statement and the daily-portion advice are part of the framework. Regulation (EU) No 1924/2006 governs claims: only a claim on the authorised list, used with its conditions, can appear on the pack. A disclaimer does not fix a claim that is not on the list, and the rule reaches implied claims in a brand name or graphic. Contaminants are governed by Regulation (EU) 2023/915, which sets maximum levels for lead, cadmium and mercury in food supplements but no harmonised arsenic maximum; national rules can fill that gap. Check the current consolidated text. ## US: dietary ingredient, Supplement Facts and cGMP In the US, riboflavin is a dietary ingredient. Supplement Facts declares the amount in mg and the percentage of the 1.3 mg Daily Value, and the source line names the form after “as”, for example “Riboflavin (as riboflavin 5'-phosphate sodium)”. The ingredient statement and the panel must describe the same material. Supplements are made under the cGMP rule in 21 CFR 111, so supplier qualification, lot records and the certificate belong to that system. A structure/function claim needs the DSHEA disclaimer and must be truthful; a claim that the product diagnoses, mitigates or addresses a medical condition is outside that route. There is no single federal maximum-level table for these metals in supplements; cGMP and adulteration provisions apply, and state rules such as California's Proposition 65 can add a warning threshold. ## Contaminants: the ceiling and the specification The table puts the EU food-supplement maximum levels beside the catalog limits. The specification is the release gate; the regulation is the legal ceiling, and the batch COA is judged against the tighter figure. Contaminant limits · EU food supplements and this specification | Parameter | EU food supplement limit or rule | This specification | Lead | 3.0 mg/kg | ≤3 mg/kg | Cadmium | 1.0 mg/kg | ≤1 mg/kg | Mercury | 0.10 mg/kg | ≤0.1 mg/kg | Arsenic | No harmonised EU maximum | ≤2 mg/kg | Microbiology | Food safety obligations apply | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent The certificate should show results, not a copy of the limit column, with the method named and the sample representative of the packed lot. A “conforms” line without a result is a conclusion, not a measurement. ## Claims: the boundary The claim is the part of the file most likely to travel from a brochure into artwork without a check. For riboflavin, the only defensible route is the authorised claim list for the market, used with its conditions and wording. This page does not list claim wording, because the register is the source and it changes; a page that copies a claim becomes a second, stale source. In the EU and UK, the claim must be authorised and must not be a claim about a medical condition. In the US, a structure/function claim needs the DSHEA disclaimer and must not cross into a claim about a medical condition. “Supports” and “maintains” are not free passes; the substance, the amount and the wording all have to fit the entry. A claim about a deficiency or a medical condition belongs to a different regulatory route. ## The file a brand should hold A supplier file is the set of documents that lets a brand answer a regulator, a retailer and a customer with the same evidence. The list below is the minimum; a market or customer can add to it. Documents that should accompany a riboflavin lot | Document | What it establishes | Specification, signed and revision-controlled | The agreed parameters, methods and limits | Batch COA | The results for the lot and its release against the specification | Safety data sheet | Handling, storage and transport information | Allergen statement | Whether any allergen is present or crosses from the process | GMO status statement | The status of the material and the process | Country of origin and manufacturer | Traceability and the identity of the producer | Stability data | The shelf life assigned to the pack and the storage condition | Packaging declaration | Food-contact compliance for the pouch or drum Certifications such as ISO 9001, FSSC 22000, halal or kosher count only if they are current and cover the site that made the lot. Ask for the scope, not the logo. ## Buyer checklist - The form on the label, certificate and specification is the same, it is on the market's permitted list, and the assay method, basis and batch result agree. - The heavy-metal results are reported element by element against the specification and the market ceiling. - The label declares the amount and the percentage of the NRV or DV, with the form named. - Every claim is on the current authorised list, or carries the correct US structure/function disclaimer. - The document set is complete, current and linked to the lot code. - The current consolidated legal text has been checked for the destination, including the UK and Northern Ireland. The catalog specification is on the product page. The certificate lines are explained on the COA page; the two forms are compared on the grade page. The market notes are in the EU, US and UK regulatory pages. ### 06 How we prove a riboflavin lot is riboflavin URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-b2/identity/ Reviewed: 2026-11-18 Riboflavin identity is established in four layers: the documentary identity of name, CAS number and formula; the spectroscopic identity from IR and UV; the chromatographic assay against a riboflavin reference standard; and the physical description of a yellow to orange-yellow crystal with yellow-green fluorescence. No single layer proves the lot; the layers have to agree. Adulteration usually shows up as a disagreement between them. In one lineA 99% assay is not an identity; the spectrum, the retention time and the colour have to describe the same molecule. ## The four layers of identity The layers answer different questions. The documentary layer says what the lot is called. The spectroscopic layer says which functional groups and chromophore are present. The chromatographic layer says the main peak behaves like riboflavin and that the assay is calculated against a riboflavin standard. The physical layer says the solid looks like the material in the specification. Identity layers · what each test establishes | Layer | Test | What it establishes | Documentary | Name, CAS number, formula, specification | The identity the lot is traded under | Spectroscopic | IR fingerprint; UV maxima and absorbance ratios | The functional groups and the isoalloxazine chromophore | Chromatographic | HPLC retention, peak purity, assay against a standard | The main peak is riboflavin and the assay belongs to it | Physical | Colour, fluorescence, crystal form | The solid matches the description and the reference Identity is not purity. A lot can be 99% riboflavin and still be the wrong crystal form for a process, and a lot can be the right form and fail the assay. The specification carries both because a buyer needs both answers. ## The ratios behind the numbers Two ratios sit behind a riboflavin certificate. The first is the dried-basis ratio: the assay is corrected for water measured by loss on drying, so the as-is content is the dried-basis result multiplied by one minus the loss on drying. A certificate that reports an as-is assay without saying so, or a dried-basis assay without a loss-on-drying figure, leaves the reader unable to check the conversion. The second is the phosphate ratio. Riboflavin is 376.37 g/mol; the anhydrous riboflavin 5'-phosphate sodium salt is 478.33 g/mol, and the dihydrate is 514.36 g/mol. One gram of the anhydrous salt therefore carries at most about 0.787 g of riboflavin, and one gram of the dihydrate about 0.732 g. The commercial salt is assayed as riboflavin on the dried basis at 73.0–79.0%, which is the same arithmetic seen from the certificate side. If a lot is labelled riboflavin but the certificate reports a phosphate content or a riboflavin figure near the middle of that window, the form has been misdescribed. A third ratio belongs to the UV spectrum. The absorbance maxima near 267, 373 and 444 nm and the ratios between them are part of the identification; a dye can match the colour at one wavelength, but it rarely matches the whole curve. ## What X-ray diffraction adds X-ray powder diffraction reads the crystal lattice. A crystalline riboflavin lot gives a fingerprint pattern, and a different crystal form, a hydrate or a crystalline diluent adds or shifts peaks. That makes XRPD a useful third opinion when IR and assay agree but the powder behaves differently in a blend, or when a supplier claims a crystal form the certificate does not describe. XRPD is not a purity assay. It sees crystalline material well and amorphous material poorly, and it does not quantify riboflavin. Use it beside HPLC: the pattern answers which solid this is, the chromatogram answers how much riboflavin is in it. Ask for the reference pattern and the detection limit; a “conforms” line without the pattern is a conclusion. ## The adulteration routes that matter Riboflavin is an intense yellow powder, and that colour is the adulterer's advantage. A blend of a cheaper yellow material with a filler can look right in a jar, and an assay can be made to look right if the method is not specific. Adulteration routes · what they mimic and what separates them | Route | What it mimics | What separates it | Riboflavin 5'-phosphate sodium | The vitamin B2 name and the yellow colour | HPLC retention and phosphate content; the salt is freely soluble | Folic acid or another yellow vitamin | The colour and part of the UV curve | HPLC retention and the full UV spectrum | Yellow dyes such as tartrazine or sunset yellow | The colour of the powder or the solution | HPLC-DAD peak purity; the fluorescence is different | Lactose, starch or dextrose | The bulk and the flow of the powder | Assay, IR and XRPD; the dilution shows in the assay The first sign is often a certificate that reports an assay without an identity test. A specific HPLC method with peak purity, an IR spectrum and a UV curve make the dye and filler routes much harder. The phosphate route needs one more line: a method that separates the ester, or a phosphate assay, because a method that hydrolyses the phosphate before detection can report the salt as riboflavin. Fermentation-derived and synthetic riboflavin are the same molecule. The difference is a supply-chain and labelling question, not an identity question, and an IR spectrum cannot tell the route. ## Writing identity into the specification A specification that says “vitamin B2 99%” has not described a material. Write the identity first, then the assay and physical lines: “Riboflavin, crystalline, CAS 83-88-5; yellow to orange-yellow crystalline powder; identification by IR and UV conforms; assay 98.0–102.0% by HPLC on the dried basis; loss on drying ≤1.5%; residue on ignition ≤0.3%; ≥95% through 80 mesh; heavy metals Pb ≤3, As ≤2, Cd ≤1, Hg ≤0.1 mg/kg; microbiology as agreed; packed in a 1 kg foil pouch.” The specification should say what the certificate must report: method, basis, reference standard and result. If the material is the phosphate salt, the specification changes to the salt's CAS number, its assay as riboflavin on the dried basis and its water content. One specification cannot cover both forms. The catalog specification is on the product page; the identity lines are reported on the COA page; the two forms are compared on the grade page. The FTIR method note covers the IR side, and the HPLC method note covers the chromatographic side. ## Five questions to ask a supplier - Which form and CAS number are you quoting, and does the certificate name the same form? - What is the assay method, the detection wavelength and the basis — as-is or dried? - Can you send the IR and UV spectra and the HPLC chromatogram for the lot, not only the assay number? - What are the loss on drying, residue on ignition and mesh, and how is the pack protected from light? - Who manufactured the lot, and how does the lot code link the certificate, the pack and the retained sample? The answers should agree with each other. A supplier who can answer the first four and not the fifth can still sell a good powder, but the file is incomplete; a supplier whose certificate names one form and whose spectrum names another has a problem no assay will fix. ### 01 What the COA for pyridoxine hydrochloride actually contains URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-b6/coa/ Reviewed: 2026-11-18 A pyridoxine hydrochloride certificate reports appearance, infrared identification, assay by titration on the dried basis, loss on drying, pH, chloride, residue, particle size, heavy metals and microbiology. Each line needs the method and the release limit beside the result. The ranges here are the catalog specification; the batch certificate confirms a particular pack, and the assay alone does not prove the salt. In one lineThe assay says how much pyridoxine the lot contains; the chloride and pH figures say it is the hydrochloride, and the certificate needs all three. ## The certificate as a test report A certificate that reports one percentage and “passes” cannot be audited. The useful document is a table: parameter, method, limit, result and basis. For this material the table has a distinctive shape, because assay and chloride are two views of the same salt. Identity, assay, water and salt checks · pyridoxine hydrochloride | Parameter | Method | Release limit | Appearance | Visual | White or almost white crystalline powder | Identification | Infrared spectroscopy | Conforms to the reference spectrum | Assay (dried basis) | Non-aqueous titration | 99.0–101.0% | Loss on drying | Gravimetric | ≤0.5% | pH (5% solution) | Potentiometry | 2.4–3.0 | Chloride | Argentometric titration | 16.9–17.6% | Residue on ignition | Gravimetric | ≤0.1% | Particle size | Sieve analysis | ≥95% through 40 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent The release assay and the chloride line are titrations; HPLC is the separation method used when the question is what else is in the powder. A certificate with an assay but no chromatogram answers a narrower question than a buyer may assume. ## Dried basis, water and the two titrations “Dried basis” means the assay is calculated after the loss on drying is removed, so a powder carrying 0.4% water is not penalised twice. At the top of the range a 0.5% moisture load moves the as-is figure by about half a percentage point, which is why the water result belongs beside the assay. The water is surface moisture, not water of crystallisation. Pyridoxine hydrochloride is an anhydrous salt, so 0.5% is a handling and packing limit: it says how much water the crystal picked up on the way to the drum. A result at 0.48% has passed, but it has little room left for a humid filling room. The assay is a non-aqueous acid–base titration. In the pharmacopoeial method the sample is dissolved in formic acid and acetic anhydride and titrated with perchloric acid; the endpoint is potentiometric or crystal violet, and the result is expressed as the hydrochloride after the drying correction. The method measures the salt as the salt; a titration run on the free base would report a different number. The chloride line is the second titration: silver nitrate in a methanol–acetic acid medium with eosin Y, reported on the dried basis at 16.9–17.6%. The theoretical figure for C8H11NO3·HCl is 17.24%, so the window is roughly 98–102% of theory. It is a stoichiometry check, not a purity range. The pH of the 5% solution, 2.4–3.0, is the third view of the salt. A pH above the window points to free base or an alkaline diluent; a pH below it points to excess acid. The test is quick and belongs on every lot. ## Release limit versus batch result The release limit is the boundary; the batch result is what the laboratory measured. They belong in separate columns, with the method and the basis next to them. A result column filled with the specification range is not a result, it is a copy of the gate, and it tells the buyer nothing about the drum in front of them. Read assay and chloride together. A certificate showing 99.4% assay with 17.1% chloride is coherent; one showing 100.6% with 16.5% chloride is not, even though the assay line passes. The second result says that part of the powder is not the hydrochloride, and the certificate should explain the gap rather than average it away. Residue on ignition and loss on drying account for the non-volatile and volatile fractions, but they do not sum with the assay into a mass balance: the chloride is already inside the 99–101%, because the assay is expressed on the salt. ## What moves between batches Assay and chloride move together when crystallisation and drying are under control, because both measure the same salt. When they separate, the cause is usually upstream or downstream of the reaction: a low assay with a low chloride suggests dilution with a non-chloride solid; a high assay with a low chloride suggests free base or a different vitamin salt; a high chloride with a normal assay suggests residual hydrochloric acid or a chloride-containing diluent. Loss on drying moves with the drying step and with the pack. Material released at 0.2% can arrive higher after a long transit in a damaged liner, and the as-is assay will follow it down even though the dried-basis figure has not moved. Particle size moves with milling and sieving: 40 mesh is the standard grade, and an 80 mesh or granulated grade is a different flow and a different dust profile. Colour is the least quantitative signal: a faint cream tint can come from trace iron or a hot drying step, while a yellow cast after storage suggests light exposure. ## When to order an outside test An independent laboratory is the right check on a new source, a first shipment into a regulated market, a disputed chloride or assay result, or a claim that the powder is a single form. The panel should target the question rather than repeat the certificate: infrared against a reference, chloride by titration or ion chromatography, HPLC for retention time and peak purity, and ICP-MS for the heavy-metal panel, all on one submitted sample. Ask for the detection limit on any “not detected” line, and for the chromatographic conditions behind an HPLC result. Chain of custody matters as well: the sample that is tested should be the sample that was retained, and its lot code should match the certificate and the pack. ## What to compare between suppliers Put six lines side by side: form and CAS; assay result, method and basis; chloride; pH and loss on drying; particle size; and the heavy-metal and microbiological results. Two offers that agree on assay but diverge on chloride, pH or mesh are not describing the same powder, even when both are called vitamin B6. The second layer is traceability. The lot code on the certificate should be on the pack and the retained sample, and the certificate should name the manufacturing site and the drying and milling steps. A correct certificate can belong to a different drum. The catalog specification sits on the vitamin B6 product page. The forms are compared on the grade page, the identity tests are set out on the identity page, and the release workflow is on the quality page. The HPLC separation is described in the HPLC method note, and the term is defined in the COA entry. ### 02 Pyridoxine HCl or P5P: choosing a vitamin B6 grade URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-b6/grades/ Reviewed: 2026-11-18 Pyridoxine hydrochloride and pyridoxal 5'-phosphate are two different label ingredients, not two purities of one vitamin. One is the hydrochloride salt of pyridoxine; the other is the phosphorylated aldehyde, usually supplied as the monohydrate or a salt. They differ in molecular weight, vitamin mass, solubility and stability, and the EU and UK lists carry a separate B6 phosphate entry. The choice follows the label and the process, not the sample bag. In one linePyridoxine hydrochloride and P5P are different label ingredients: the salt, the potency per milligram, the solubility and the permitted-source entry all change with the form. ## Why the form is the first question “Grade” is loose language here. Pyridoxine hydrochloride is a defined salt, CAS 58-56-0, 205.64 g/mol, with a chloride counter-ion. Pyridoxal 5'-phosphate, CAS 54-47-7, is a different molecule with a phosphate group and an aldehyde; its common commercial form is the monohydrate at 265.16 g/mol. Both deliver vitamin B6 on a panel, but they are separate substances in the ingredient list, the assay method and the source list. The assay percentage is the first trap. A quotation for “B6 99%” can describe the hydrochloride, a P5P salt, a P5P monohydrate or a diluted blend, and those percentages have different denominators. Ask for the chemical name, the salt or hydrate and the assay basis before comparing two numbers. ## The two forms side by side Pyridoxine hydrochloride and pyridoxal 5'-phosphate as materials | Property | Pyridoxine hydrochloride | Pyridoxal 5'-phosphate | Chemical name | Pyridoxine hydrochloride | Pyridoxal 5'-phosphate | CAS number | 58-56-0 | 54-47-7 (free acid); 41468-25-1 (monohydrate) | Formula and molecular weight | C8H11NO3·HCl, 205.64 g/mol | C8H10NO6P, 247.14 g/mol; monohydrate 265.16 g/mol | Assay convention | 99.0–101.0% on the dried basis, titration | Expressed as the phosphate form; water declared | Pyridoxine fraction | 82.3% of the salt mass | 68.5% of the free acid; 63.8% of the monohydrate | Counter-ion | Chloride, 16.9–17.6% | Phosphate; no chloride | Solubility in water | Freely soluble; the 5% solution is pH 2.4–3.0 | Sparingly soluble as the free acid; salt forms and alkaline pH improve it | Light and heat | Light-sensitive; the dry powder is durable | Light-sensitive; more labile, especially in solution | Ingredient-list name | Pyridoxine hydrochloride | Pyridoxine 5'-phosphate (EU/UK entry name); pyridoxal 5'-phosphate (US) The pyridoxine-fraction row changes the weigh-out; the counter-ion row changes the identity test. Neither is visible in a single assay percentage. ## Solubility, stability and the dosage form Pyridoxine hydrochloride dissolves freely in water and gives an acidic solution, which makes it the easier form for a liquid, a stick or a gummy. The acidity is real: a 5% solution sits at pH 2.4–3.0, so it contributes to the acid load and the taste. In a dry capsule or tablet the acidity is irrelevant, and the 40 mesh crystalline powder flows and blends well; an 80 mesh or granulated grade is available where segregation or dust is the issue. P5P is sparingly soluble as the free acid and is usually supplied as the monohydrate or a salt. The salt brings its own counter-ion and water, both of which belong in the specification. Solubility improves in alkaline solution or with a salt form, but an alkaline matrix is a less friendly environment for the molecule. Both forms are light-sensitive and need an opaque pack. P5P is the more labile, particularly in solution, where light, heat and water work together. A dry blend or a direct-compression tablet keeps either form in the environment it tolerates most readily; a gummy cook, a wet granulation or a drink puts the material into water and heat, and the stability data has to belong to that matrix. ## Converting a label claim into a weigh-out The label declares vitamin B6, not the salt. For the hydrochloride the conversion is the molecular-weight ratio: 10 mg of pyridoxine is 10 ÷ 0.823, or about 12.2 mg of pyridoxine hydrochloride. For P5P the same 10 mg is about 14.6 mg of the free acid, or about 15.7 mg of the monohydrate, because the phosphate group, and the water in the monohydrate, add mass that carries no pyridoxine. A form switch made at the same milligram weight therefore changes the label claim, and a switch made at the same label claim changes the weigh-out. The reference values sit behind the percentage on the panel. In the EU and the UK the nutrient reference value for vitamin B6 is 1.4 mg, and in the US the daily value is 1.7 mg under the current labelling rule. Those figures are label references, not a dose recommendation, and they are declared in milligrams of vitamin B6. The overage is a separate decision: it comes from the loss curve of the specific form in the specific pack, so an overage carried over from the hydrochloride is not evidence for P5P. At these masses the raw material is not the constraint: a 10 mg claim is a small fraction of a capsule fill, so blend uniformity and the premix carrier decide whether the label holds. The assay basis and water limit set the weigh-out. ## What changes in the specification and the label A form switch is a new specification. The chemical name and CAS number change, the assay method may need revalidation, and the counter-ion test changes from chloride to phosphate. The water limit changes with the hydrate, the solubility changes the process, and the stability data must be repeated in the new matrix. The label name changes with the substance, and the permitted-source entry has to match it: the EU and UK lists name pyridoxine hydrochloride and a separate phosphate entry, worded pyridoxine 5'-phosphate; confirm the P5P form matches it. In the US the Supplement Facts panel declares vitamin B6 while the ingredient list names the form, so the two lines have to stay consistent. A product with both forms must declare both; a blend sold as one form is a labelling problem even when the total vitamin B6 is correct. Write the specification around the substance: chemical name with salt and hydrate, CAS number, assay basis and method, counter-ion, water limit, particle size and the label name for each market. Then confirm the claim arithmetic, overage and stability data have been rebuilt around it. ## When to stay with the hydrochloride The hydrochloride is the default when the artwork is approved, the dosage form is a dry capsule or tablet, several markets have to be covered from one file, and the buyer's method covers the salt. It is also the simpler file: one counter-ion, one assay convention and an established supply chain. P5P is the choice when the destination market permits that specific entry by name, when the formula and pack have been studied with it, and when the analytical method covers the phosphate form. Those are file conditions. A switch made before the file exists is a formula change without a label. The direct comparison is on the HCl versus P5P page. The catalog specification is on the vitamin B6 product page; the certificate lines are on the COA page; the storage question is on the stability page; the market rules are on the compliance page. The reference values are in the NRV entry and the daily-value entry. ### 03 Pyridoxine is light-sensitive; moisture and the matrix decide the rest URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-b6/stability/ Reviewed: 2026-11-18 Pyridoxine hydrochloride is a light-sensitive crystalline powder. Sealed in a foil pouch, dry and dark, it holds its assay; exposed to light, moisture or a warm aqueous matrix, it loses assay and gains photoproducts. The release certificate describes the day of manufacture, not the finished pack. Shelf life comes from a study in the pack that will be sold. In one lineDry and dark, pyridoxine hydrochloride is durable; light, moisture and the matrix set the rate at which the label claim falls. ## The powder: dry, dark and sealed The catalog limits loss on drying to 0.5%, and that figure is not water of crystallisation. Pyridoxine hydrochloride is an anhydrous salt, so the water is surface moisture picked up in handling, and an opened pouch in a humid room will add to it. The 1 kg pack is an aluminium laminate for two reasons: it blocks light, the first degradation route, and it slows moisture pickup. A clear bag blocks neither, and a clear jar lets light through. Three habits matter more than a storage claim. Keep the pouch closed between withdrawals, take out only the portion for the batch, and never leave the open pouch under a window or a bright luminaire. A dark cupboard at room temperature is adequate; a warm roof space is not, because heat and moisture move together. A desiccant does not repair a damaged laminate. Colour will not tell you how much light the powder has seen. White to almost white is the specification, and a faint cream tint can be a lot-to-lot difference or a trace of iron. A yellow cast after storage is more suggestive, but the instrument for the question is the assay and the related-substance profile, not the eye. ## Water is the step that changes the rate The 5% solution is acidic, pH 2.4–3.0, and pyridoxine hydrochloride dissolves freely in water. The acidic environment is a property of the salt, not a preservation strategy: light still drives photodegradation, and moving the pH toward neutral or alkaline generally increases the rate. Oxygen and trace metals add a second route, which is why a clear tank in a bright room is the worst place for a hold. Any wet process puts the molecule into that environment: a wet granulation, a film-coat suspension, a gummy cook, a drink or a syrup. The controls are procedural. Use water only where the dosage form needs it, keep the wet mass cool and covered, keep vessels out of direct light, and dry at the lowest temperature that reaches the target moisture. Test the dried granulate for assay and related substances, because a granulation can pass on assay while the degradant total has moved. If a solution is unavoidable, fix a maximum hold time and test at the end of it. A hold study run at the plant's ambient temperature is more useful than a supplier's general statement about stability. P5P is the more labile of the two forms in solution, so a process validated for the hydrochloride does not automatically cover a switch. ## What actually moves the number Degradation routes for pyridoxine hydrochloride and the control that answers each | Factor | What it does | Control | Light, especially UV | Drives photodegradation; usually the first loss in an exposed pack | Opaque or amber pack, foil laminate, dark handling | Heat | Accelerates hydrolysis and oxidation; drying and cooking steps matter most | Lowest workable process temperature; cool storage | Oxygen | Oxidative loss, helped by trace metals | Low headspace, nitrogen where appropriate, compatible antioxidants | Moisture | Provides the reaction medium and raises water activity | Sealed laminate, dry handling, loss-on-drying control | pH | The salt solution is acidic; neutral and alkaline conditions generally accelerate loss | Keep the matrix acidic where the formula allows | Metal ions | Iron and copper catalyse oxidation at trace levels | Heavy-metal limits; avoid contaminated excipients A warm, humid, lit environment moves several at once, which is why the accelerated study exists. ## Designing the stability programme Put three things on test: the raw material in its commercial pack, the premix or blend as it will be held, and the finished unit in the pack that will be sold. A study that covers only the drum says nothing about a clear blister or a gummy. The usual design runs long-term conditions at 25 °C and 60% relative humidity, an intermediate condition at 30 °C and 65% where the destination climate calls for it, and an accelerated condition at 40 °C and 75% for six months. Timepoints of 0, 3, 6, 9, 12, 18 and 24 months cover the common claims, and the study should run at least to the date you intend to claim. Photo-stability is a separate experiment. The ICH Q1B option 1 exposure — 1.2 million lux hours of visible light plus 200 W·h/m² of near ultraviolet — is the usual reference, and the sample should be in the marketed pack with an unprotected control beside it. The control shows whether the pack is doing the work. Test appearance, assay, loss on drying and the related-substance profile for the powder, and the label claim plus the physical attributes for the finished unit. ## The matrix decides more than the raw material does A dry two-piece capsule is the gentlest matrix: low water, no heat and no compression. A direct-compression tablet is close behind. A wet-granulated tablet adds water and a drying step. A gummy is the hardest case, because the cook combines heat, water and an acidic pH, and the finished gummy keeps a water activity that lets the reaction continue. A powder stick depends on its laminate; a drink depends on pH, light and the hold before filling. At a 1.4 mg nutrient reference value or a 1.7 mg US daily value, the vitamin is a small fraction of the unit. The premix or carrier that delivers it has its own moisture and its own stability, and a carrier that picks up water in storage can deliver the pyridoxine to the press already under stress. Ask what it is blended with before it reaches the blender. ## Assigning the shelf life The raw material's retest period and the finished product's shelf life are different claims: the first belongs to the certificate, the second to a study in the marketed pack. The label storage statement has to match that study: a product studied at 25 °C cannot invite storage at 40 °C, and a clear blister cannot enforce a dark storage instruction on its own. Where an overage is used, it covers the loss curve of the specific form in the specific matrix. It does not cover a pack that lets light in. The sequence is therefore: choose the pack for light and moisture, run the study in that pack, write the storage statement from the study, and set the shelf life from the data. The catalog specification is on the vitamin B6 product page; the certificate lines are on the COA page; the pack sizes are on the MOQ page; the label and market rules are on the compliance page. The moisture test is described in the loss-on-drying entry, and the release workflow is on the quality page. ### 04 Vitamin B6: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-b6/moq/ Reviewed: 2026-11-18 The minimum order is 1 kg, in a foil pouch; the production pack is a 25 kg fiber drum; a released lot ships in 1–7 days. One kilogram is a traceability unit rather than a volume limit, because at a milligram dose it holds hundreds of thousands of portions. A quotation needs six details: form and mesh, specification and assay basis, quantity and pack, destination and Incoterms, documents, and label market with any extra test. In one lineOne kilogram is the smallest unit that carries its own lot code, certificate and retained sample, and at a milligram dose it holds hundreds of thousands of portions. ## Why the minimum is 1 kg Pyridoxine hydrochloride is used at a small mass per unit. One kilogram is 1,000,000 mg, so at a 1.4 mg label portion it is about 714,000 portions before overage, and at a 10 mg claim it is still 100,000. A first trial rarely needs either number, which is why the minimum is not a volume threshold. It is the smallest pack that can be released as its own lot, with a lot code, a certificate and a retained sample that all refer to the same material. Below a kilogram the powder is usually repacked from a larger lot, and the link between the certificate and the pack in the buyer's hand becomes an assertion rather than a record. That makes the 1 kg pack the qualification unit as well. A buyer who needs 200 g for a trial is better served by a 1 kg pack whose certificate can be compared with the production lot than by a split with no certificate of its own. The same pack on the repeat order keeps that comparison open. ## The two standard packs Standard packs for pyridoxine hydrochloride, 40 mesh crystalline powder | Pack | Net content | Typical use | Handling | Foil pouch, aluminium laminate | 1 kg | Sample, qualification, pilot batch | Reseal after each withdrawal; keep cool, dry and dark | Fiber drum with double liner | 25 kg | Production campaign | Keep the liner closed; store away from light and moisture The laminate does two jobs: it blocks light, the first degradation route for this material, and it slows moisture pickup. A sample in a clear bag tells the buyer nothing about either. The pack label should carry the product name, the form, the lot code, the net content, the storage statement and the manufacture or retest date. The standard grade is 40 mesh. An 80 mesh or granulated grade is available on request, and the pack is agreed with the order because the three flow differently and dust differently. An opened 1 kg pouch is not a dispensing pack: each opening exposes the surface layer to light and moisture, and the remainder should be resealed and used within the period the stability data supports. The 25 kg drum is a production pack, not a storage silo. ## Lead time and what moves it The standard 40 mesh grade is quoted at 1–7 days from a released lot. That window covers release, packing and dispatch, not transit to the destination. The clock starts when the specification, the order and the document set agree; a purchase order that says only “vitamin B6” is not a starting signal, because the form, the mesh and the pack are still open. Several things move the date: an 80 mesh or granulated grade, a custom pack, a market-specific document set, a test that is not on the standard certificate, or a destination that requires a pre-shipment check. If the date is critical, state when the material has to be at the destination, not only when it has to be ordered, and say whether a partial shipment on the standard grade would help. ## The six details a quotation needs What to put in an enquiry so the answer is a specific offer | Detail | Why it changes the offer | Form and particle size | Pyridoxine hydrochloride and P5P are different materials; 40 mesh and 80 mesh are different grades | Specification and assay basis | The dried-basis assay, chloride, pH, water limit and mesh define the release test | Quantity and pack | 1 kg pouch and 25 kg drum are different units, labels and handling | Destination and Incoterms | Freight, documents and responsibility change with the route | Documents required | COA, TDS, SDS, allergen, GMO and origin statements are separate items | Label market and extra tests | EU, US and UK labels use different names and units; an extra test is a different release protocol An enquiry with these six details can be answered with one offer. An enquiry that says only “vitamin B6 99%” produces a range, because the supplier has to guess the form, the basis and the market file. ## Samples and qualification A sample should be drawn from a released lot and should arrive with that lot's certificate. The lot code on the sample, the certificate and the retained sample should be identical; if they are not, the sample cannot qualify the production material. Ask for the material in the commercial laminate rather than a bag of powder, and ask which lot it came from. Qualification needs more than a teaspoon. A 1 kg pack lets the buyer run identity, a trial blend and a short stability check from one lot, and keeps enough material for a repeat test if a result is disputed. Record the sample lot code in the trial record; when the production order arrives, compare its lot code and certificate with the sample. ## Terms that belong in the order The purchase order should reference the specification, the form, the mesh, the pack, the lot certificate and the retest date, and should state the documents that must travel with the shipment. Add the non-conformance window, the address for the retained sample and the rule for a lot that arrives outside the agreed light or moisture conditions. For a repeat order, a quality agreement can fix the specification, the change-notification rule and the annual review, so that each order does not reopen the same questions. Change notification matters here: a switch of manufacturer, drying step or laminate changes the light and moisture exposure, and the certificate alone will not show it. Incoterms and payment terms are commercial, but they affect the file. A delivered order and an FOB order place different responsibilities on transport conditions, and a material that is light-sensitive in transit needs the shipping instruction in the order rather than in a later email. The MOQ is stated on the vitamin B6 product page. The certificate lines are on the COA page, the pack-and-light question is on the stability page, and the market file is on the compliance page. Packing and shipping options are described on the logistics page, and the term itself is defined in the MOQ entry. ### 05 Where pyridoxine hydrochloride is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-b6/compliance/ Reviewed: 2026-11-18 Pyridoxine hydrochloride is a permitted vitamin B6 source in food supplements in the EU, the US and the UK. Permission is the entry point, not the file: the source-list entry has to match the form, the contaminant limits have to be met on the product as sold, and the label has to use the right name, unit and claim wording. The file has to show all three, plus the documents that tie the lot to the pack. In one linePyridoxine hydrochloride is permitted in all three markets, but the permitted-source entry, the contaminant annex and the label rule must match the form in the drum. ## Three regimes, one structure The EU regulates food supplements under Directive 2002/46/EC, which works from a positive list of vitamins, minerals and their permitted forms. In the US, pyridoxine hydrochloride is affirmed as GRAS for use as a nutrient supplement under 21 CFR 184.1676, and a dietary supplement is regulated under DSHEA with cGMP under 21 CFR 111 and the Supplement Facts panel under 21 CFR 101.36. The UK applies the Food Supplements (England) Regulations 2003, as amended, mirrored in the devolved nations, with assimilated nutrition labelling. All three ask the same three questions. What is the exact substance, and is it on the list? Do the contaminants meet the destination's limits? Does the label name the source as the list names it and use the permitted claim wording? “Vitamin B6” is a nutrition term, not a source; the file has to name pyridoxine hydrochloride. ## The EU source list and the label Pyridoxine hydrochloride is entry 9(a) for vitamin B6 in Annex II of Directive 2002/46/EC, and pyridoxine 5'-phosphate is a separate entry at 9(b). The label must name the source as the Annex names it, so a product made with the hydrochloride cannot be labelled with the phosphate name or with a generic “vitamin B6” source line. Check the consolidated Annex II rather than a summary, because the entries are form-specific. The nutrition declaration gives vitamin B6 in milligrams with the percentage of the nutrient reference value, which is 1.4 mg under Regulation (EU) No 1169/2011. The EU has not harmonised maximum levels for vitamins in supplements; several member states set their own, so a multi-market product has to be checked market by market before the dose is fixed. Pyridoxine hydrochloride is not a regulated allergen, but the pack still needs the storage statement, the lot code, the net quantity and the operator's name and address. ## The US route is a different route In a dietary supplement, pyridoxine hydrochloride is used as a vitamin source under DSHEA. The GRAS affirmation at 21 CFR 184.1676 covers its use as a nutrient supplement in food; a supplement is a separate route, and the label follows the Supplement Facts rules rather than the conventional food rules. The Supplement Facts panel declares vitamin B6 in milligrams with the percentage of the daily value, which is 1.7 mg under the current labelling rule, while the ingredient list names the source. The daily value is a labelling reference, not a dose ceiling. The FDA does not set a federal maximum level for lead, cadmium or mercury in dietary supplements; California Proposition 65 sets a maximum allowable dose level for lead of 0.5 µg per day and requires a warning above it, and state rules or customer specifications can be tighter. ## Contaminants: the table the file has to meet Contaminant limits for a pyridoxine hydrochloride food supplement, by market | Contaminant | EU and UK | US | Lead | 3.0 mg/kg in food supplements | No federal limit; California Prop 65 applies | Cadmium | 1.0 mg/kg in food supplements | No federal limit | Mercury | 0.10 mg/kg in food supplements | No federal limit | Arsenic | No harmonised EU limit; national rules may apply | No federal limit The EU limits sit in Regulation (EU) 2023/915; the UK applies its own retained contaminant limits, so check the current GB text for the destination. The catalog specification sets Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg. Those figures meet the EU lead, cadmium and mercury maxima at the limit and set an internal arsenic figure where the EU has none. A lot released at 3.0 mg/kg lead is compliant as a raw material, but it leaves no room for lead from other ingredients in the finished product. The file should carry the finished-product calculation, not only the raw-material certificate. The comparison also has to be on the same basis: the contaminant limits apply to the product as sold, while the assay is reported on the dried basis. ## Where the claim boundary sits In the EU and the UK, only claims on the authorised register may be used, and each entry carries conditions of use, including a minimum quantity in the daily portion. The vitamin B6 entries are nutrient-function claims, and the register wording is the only wording that can be used: a paraphrase is a different claim, and disease claims are not available for a food supplement. In the US, structure/function claims are permitted with the required disclaimer and, where applicable, the notification to the agency. Disease claims are not permitted for a dietary supplement. The raw material carries no claim of its own; the claim belongs to the finished product and to the nutrient, and this page does not repeat any claim wording. ## The file that travels with the lot Documents a pyridoxine hydrochloride shipment should be able to produce | Document | What it has to show | Certificate of analysis | Lot code, methods, limits and results; assay and chloride on the dried basis | Specification and TDS | The agreed limits, the mesh, the pack and the storage statement | SDS | Handling, dust, light and moisture precautions in the current format | Contaminant and microbiological statements | Heavy metals by ICP-MS and the micro panel, with methods | Allergen, GMO and irradiation statements | Declarations for the regulated allergens and for process steps | Origin and flow chart | Manufacturing site and the steps that affect light and moisture | Food-contact declaration | The pouch and the drum liner declare compliance for the destination market | Residual solvents and process aids | A statement where the customer's specification requires one ## Before the pallet ships - The label source name matches entry 9(a) for pyridoxine hydrochloride. - The nutrition declaration uses milligrams and the correct reference value. - The certificate reports the assay on the dried basis and the loss on drying beside it. - The chloride result sits inside 16.9–17.6%, and the pH inside 2.4–3.0. - The heavy-metal results meet the destination limit on the product as sold, with the method named. - The claim text comes from the register or the notification, with its condition of use. - The storage statement matches the pack and the stability data. - The lot code is identical on the certificate, the pack and the retained sample. - The food-contact declaration covers the pouch and the drum liner. The market rules are summarised on the EU, US and UK regulatory pages. The catalog specification is on the vitamin B6 product page; the certificate lines are on the COA page; the pack sizes are on the MOQ page; the reference value is defined in the NRV entry. ### 06 How we prove a pyridoxine lot is the hydrochloride URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-b6/identity/ Reviewed: 2026-11-18 Identity for a pyridoxine hydrochloride lot rests on four layers: the document tying the pack to a lot, the infrared spectrum matching the molecule, the titration measuring the salt, and the chloride and pH figures proving the counter-ion. The catalog requires IR to conform, assay 99.0–101.0% on the dried basis and chloride 16.9–17.6%. In one lineThe IR spectrum names the molecule, the titration measures it, and the chloride and pH figures prove the salt; any one of them alone leaves a gap. ## Four layers, each answering a different question What each identity layer proves for pyridoxine hydrochloride, and what it cannot | Layer | Evidence | What it proves | What it misses | Document | Name, CAS 58-56-0, lot code, certificate, retained sample | The paper describes this pack | Nothing about the powder | Spectroscopic | IR against a reference standard | The functional groups are those of pyridoxine hydrochloride | Quantity and chloride stoichiometry | Titration and chloride | Assay on the dried basis; argentometric chloride | How much salt is present and that the counter-ion is chloride | Other B vitamins and non-absorbing diluents | Chromatographic | HPLC retention time and peak purity; LC-MS on request | What else is present and whether the main peak is pure | Not a stand-alone release identity The layers are cumulative. An assay alone is one layer; a certificate with the spectrum, the chloride figure and the chromatogram gives four and lets the lot be audited. ## Reading the infrared identification Pyridoxine hydrochloride shows the pyridine ring, the phenolic hydroxyl and the hydroxymethyl groups, and the hydrochloride adds an N–H absorption the free base lacks. The test compares the sample with a reference spectrum run under the same conditions. A potassium bromide disc and an attenuated-reflectance accessory give different spectra, so a certificate comparing one against the other compares two techniques. P5P does not give the same spectrum: the aldehyde carbonyl and phosphate P–O bands are new, and the O–H region changes with the hydrate. IR is the first screen against a form switch, and extra bands the reference lacks are the useful signal. A library match score is a similarity measure, not proof of purity. ## The titration and the chromatogram The quantitative layer is a non-aqueous titration: the sample is taken up in formic acid with acetic anhydride, perchloric acid is added to the endpoint, and the result is calculated on the dried basis. The 99.0–101.0% window is narrow, so loss on drying has to be read beside it; a 0.5% water load moves the as-is figure by about half a point. HPLC answers a different question. It separates the main peak from the rest of the sample, confirms retention time against a standard and allows a peak-purity check with a diode-array detector. If the certificate carries no related-substance line, ask for the chromatogram: a method that resolves the main peak from a neighbouring B vitamin is evidence, while a single assay percentage is not. ## The 1:1 salt ratio Pyridoxine hydrochloride is a 1:1 salt, one pyridoxine molecule to one chloride. The base is 169.18 g/mol; hydrogen chloride adds 36.46, so the salt is 205.64 and chloride is 17.24% of it. The 16.9–17.6% window is about 98–102% of theory. Read the assay and the chloride as a pair: at 100% assay on the dried basis, chloride must sit near 17.2%; 100% assay with 15% chloride is a different composition. The pair is a consistency check, not an identity test. ## The chloride and pH figures prove the salt The chloride line is an argentometric titration: silver nitrate in a methanol–acetic acid medium with eosin Y, reported on the dried basis at 16.9–17.6%. A certificate with an assay near 100% and chloride at 15% is not the hydrochloride; part of the powder is free base, a non-chloride diluent or another substance. The pH of the 5% solution, 2.4–3.0, is the second view of the same stoichiometry. A reading above the range suggests free base or an alkaline diluent; below it, excess acid. The chloride line proves the counter-ion, not the base: a different hydrochloride with a similar chloride fraction could sit inside the window, which is why IR and the HPLC retention time are also required. ## Where XRD fits, and where it does not Pyridoxine hydrochloride is crystalline and gives a sharp diffractogram, but XRD is not the release identity test: infrared absorption against a reference is, and chloride and pH close the salt. XRD cannot see water or an amorphous diluent, and it does not quantify. Its use is narrower: it can show that a disputed lot is crystalline rather than spray-dried, or that a blend carries crystalline lactose, cellulose or another excipient. For routine lots, IR, titration and chloride answer with less equipment, so XRD belongs on request rather than on every certificate. ## Three ways a B6 powder can be wrong Another form of B6. P5P has no chloride and a different molecular weight, IR spectrum and retention time, so it fails the chloride line and the IR comparison before any assay question arises. Pyridoxal and pyridoxamine are closer in structure but give different chromatographic peaks and spectra. Another B vitamin. Thiamine hydrochloride, niacinamide and riboflavin are plausible additions in a blend. The HPLC profile and the IR spectrum are the practical screens. A diluent. Lactose, dextrose, starch, silicon dioxide and magnesium stearate all lower the assay, and the inorganic ones raise the residue on ignition above 0.1%. Water is excluded by the dried-basis calculation but visible in the loss on drying. A result of 99.4% with a flat chromatogram and a low residue is coherent; the same assay with an extra peak and a high residue is not. ## Writing identity into the specification An identity clause that can be tested has six parts: the name and CAS number; the reference standard and technique for IR; the assay basis and titration method; the chloride and pH windows; particle size; and a statement that no carrier, diluent or other B vitamin has been added. Add the evidence clause: the spectrum, chromatogram and chloride result are available for the lot, and the lot code on the certificate matches the pack and the retained sample. A specification can be met by a powder that is not the named substance if identity is reduced to a single assay line. ## Five questions for the supplier - Is the material pyridoxine hydrochloride, CAS 58-56-0, and is any free base, P5P or other B vitamin present? - Is the assay on the dried basis by titration, and what is the loss on drying for this lot? - What are the chloride and pH results, and were they run on the same lot as the assay? - Can you send the IR spectrum and the HPLC chromatogram with the peak-purity result? - Who manufactured the lot, and does the retained sample carry the same lot code as the pack? Five direct answers amount to an identity file. The infrared method is in the FTIR note, and the separation in the HPLC note. The catalog specification is on the vitamin B6 product page; the certificate lines are on the COA page; the forms are compared on the grade page; the release workflow is on the quality page; the retained-sample rule is in the retained-sample entry. ### 02.1 Pyridoxine HCl vs P5P: potency, solubility and the label URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-b6/grades/pyridoxine-hcl-vs-p5p/ Reviewed: 2026-11-18 Pyridoxine hydrochloride and pyridoxal 5'-phosphate both declare vitamin B6, but they are separate substances with separate molecular weights, label names and stability profiles. The hydrochloride is 82.3% pyridoxine by mass and dissolves freely; P5P is 68.5% pyridoxine as the free acid, less soluble and more labile. A formula built on one cannot be switched to the other by changing a number on the panel. In one lineThe two forms are not interchangeable milligram for milligram: P5P carries less pyridoxine per milligram, dissolves differently and appears under a different name on the label. ## What is actually in the drum Pyridoxine hydrochloride and P5P compared as label ingredients | Property | Pyridoxine hydrochloride | Pyridoxal 5'-phosphate | Identity | Pyridoxine hydrochloride, CAS 58-56-0 | Pyridoxal 5'-phosphate, CAS 54-47-7; monohydrate 41468-25-1 | Formula and molecular weight | C8H11NO3·HCl, 205.64 g/mol | C8H10NO6P, 247.14 g/mol; monohydrate 265.16 g/mol | Counter-ion | Chloride, 16.9–17.6% | Phosphate; no chloride | Pyridoxine fraction | 82.3% of the salt mass | 68.5% of the free acid; 63.8% of the monohydrate | Assay convention | 99.0–101.0% on the dried basis, titration | Expressed as the phosphate form; water declared | Label name | Pyridoxine hydrochloride | Pyridoxine 5'-phosphate (EU/UK entry name); pyridoxal 5'-phosphate (US) The pyridoxine fraction is the row that matters for the panel; the counter-ion row is the one that matters for identity. A certificate that reports “99%” without the form and the basis has not said which of these powders is in the drum. ## What a milligram actually delivers The label declares vitamin B6, not the salt. At the hydrochloride's 82.3% fraction, a 10 mg vitamin B6 claim needs 10 ÷ 0.823, or about 12.2 mg of the salt. For P5P the same 10 mg is about 14.6 mg of the free acid, or about 15.7 mg of the monohydrate. A form switch at the same milligram weight therefore changes the label claim, and a switch at the same claim changes the weigh-out. The assay percentage does not remove that difference. A 99% hydrochloride assay is about 81.5% pyridoxine by mass, while a 99% P5P free-acid assay is about 67.8% pyridoxine. The two numbers are both “99%” and they describe different amounts of the vitamin. That is why a quotation, a specification and a label should all name the form and the basis before any percentage is compared. The reference values sit behind the panel percentage. In the EU and the UK the nutrient reference value for vitamin B6 is 1.4 mg; in the US the daily value is 1.7 mg. Those are label references, not a dose recommendation. The overage is a separate decision, set from the loss curve of the specific form in the specific pack; an overage carried over from the hydrochloride is not evidence for P5P. ## Solubility and stability decide the process Pyridoxine hydrochloride is freely soluble in water and the 5% solution is pH 2.4–3.0. That makes it the easier form for a liquid, a stick or a gummy, where the acidity has to be balanced against the rest of the formula. In a dry capsule or tablet the solubility is irrelevant, and the 40 mesh crystalline powder is the straightforward choice; an 80 mesh or granulated grade changes flow and dust. P5P is only sparingly soluble as the free acid; the commercial monohydrate or a salt is the usual form, and a salt brings its own counter-ion and water into the specification. The solubility gain comes with an alkaline solution that is not automatically kinder to the molecule. Both forms are light-sensitive and need an opaque pack; P5P is the more labile of the two, particularly in solution, where light, heat and water work together. The matrix therefore decides more than the raw material. A dry blend or a direct-compression tablet keeps either form in the environment it tolerates most readily. A wet granulation, a gummy cook or a drink puts the material into water and heat, and the stability data has to belong to that matrix. A process validated for the hydrochloride does not automatically cover P5P. ## What the label can carry In the EU, Directive 2002/46/EC Annex II lists pyridoxine hydrochloride at 9(a) and pyridoxine 5'-phosphate at 9(b). They are separate entries, so the label source name has to match the entry for the form in the drum. The UK schedule mirrors the two entries. The phosphate entry is worded pyridoxine 5'-phosphate, not pyridoxal 5'-phosphate, so a P5P product has to confirm that the commercial form matches the entry before the label is fixed; the US ingredient list commonly uses pyridoxal 5'-phosphate. A label written for the hydrochloride does not cover P5P, even when the nutrition declaration says vitamin B6 in both cases. In the US the Supplement Facts panel declares vitamin B6 while the ingredient list names the form, and a product that contains both forms has to declare both. A blend sold as one form is a labelling problem even when the total vitamin B6 is correct. The claim boundary is unchanged by the form: no disease claim is available for a supplement, and any structure/function wording needs its disclaimer. ## When each one is the right choice The hydrochloride is the default when the artwork is already approved, when the dosage form is dry, when several markets have to be covered from one file, and when the buyer's method is validated for the salt. It is also the simpler file: one counter-ion, one assay convention and a well-established supply chain. P5P becomes the choice when the destination list has an entry that matches the drum, when the pack and formula have been studied with it, and when the method covers the phosphate. Those are file conditions, not preferences. A switch attempted before the file exists is a formula change with no label behind it. ## What to write when you switch Write the specification around the substance: chemical name with salt and hydrate, CAS number, assay basis and method, counter-ion, water limit, particle size and the label name for each market. Add the statement that the material is a single form, with no other B6 source blended in, unless a blend is what the order asks for. Then test the switch against four numbers: pyridoxine mass per unit, label percentage, overage and end-of-shelf-life claim. If any of the four cannot be supported by data in the new matrix, the form is not ready to change. The wider comparison is on the grade page; the catalog specification is on the vitamin B6 product page; the certificate lines are on the COA page; the storage question is on the stability page; the source lists and label rules are on the compliance page. The NRV entry and the daily-value entry define the reference values. ### 01 What the COA for vitamin E 50% powder actually contains URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-e/coa/ Reviewed: 2026-11-18 The certificate for a vitamin E 50% powder reports appearance, identification by HPLC retention time, tocopheryl acetate at 50.0–55.0% by HPLC, the IU equivalent calculated from it, loss on drying, the declared carrier, dispersibility, particle size, the heavy-metal panel and microbiology. The ranges on this page are the catalog specification for the water-dispersible powder; the batch COA is the document that confirms a particular pouch or drum. The 50% is a mass fraction of the acetate, not of vitamin E in general, and the IU figure follows from it. In one lineThe certificate's 50% is tocopheryl acetate by HPLC, not vitamin E in general; the IU figure and the carrier follow from that number. ## The certificate as a test report A certificate is auditable when each row names the parameter, the method and the limit the lot was released against. For a 50% powder the sheet needs one line that a pure vitamin does not: the carrier, because about half of the powder is not the vitamin. Identity, assay and matrix · vitamin E 50% water-dispersible powder | Parameter | Method | Release limit | Appearance | Visual | White to off-white, free-flowing powder | Identification | HPLC retention time | Conforms to the tocopheryl acetate reference standard | Tocopheryl acetate | HPLC, UV detection | 50.0–55.0% | Potency equivalent | Calculated at 1 mg = 1 IU | 500–550 IU/g | Loss on drying | Gravimetric | ≤5.0% | Carrier | Declaration | Modified starch and silicon dioxide, declared | Dispersibility | Water dispersion test | Dispersible in cool water, forming a milky emulsion | Particle size | Sieve analysis | 100% through 40 mesh Identification is a conformance statement rather than a measured value, and carrier is a declaration; on request the certificate can state the proportion. The rest are measured lines, and each should carry a unit and an acceptance limit. ## What the 50% measures The assay reports tocopheryl acetate, the acetate ester of alpha-tocopherol. Its molecular mass is 472.74 g/mol, and the labelling convention assigns 1 IU to 1 mg of the dl form, so 50.0–55.0% is 500–550 mg/g and 500–550 IU/g. At the bottom of the window one IU is 2.0 mg of powder; at the top it is 1.82 mg. That is the arithmetic a formulator uses to turn a label dose into a fill weight, and it only works when the certificate names the form. The acetate result is not a tocopherol result. Releasing the acetyl group changes the mass: the same lot expressed as free tocopherol would read about 91% of the acetate figure on a mass basis, and a supplier who reports “vitamin E 50%” without the form leaves the reader to guess which number is on the sheet. This catalogue's grade is the dl-acetate, and the certificate should say so next to the assay. The basis has to be stated as well. Loss on drying is allowed up to 5.0%, so a result reported on the dried basis is higher than the same powder as sold; 50.0% on dried material is about 47.5% at the top of the moisture limit. The carrier is the remainder — modified starch and silicon dioxide, declared — not a diluent to be inferred from a difference. ## Release limit versus batch result The release limit is the acceptance boundary; the batch result is what the laboratory measured on that lot. Both belong on the sheet, in separate columns, with the method beside them. A result column filled with the specification range is a copy of the gate, not a result. Dispersibility is a pass or fail observation — a milky emulsion in cool water — and particle size is a sieve result, 100% through 40 mesh; neither has a window to negotiate. The IU line is calculated from the assay, not measured a second time. If the certificate prints a percentage and an IU/g figure that do not reconcile at 1 IU per milligram, one of them is on a different basis or describes a different form. “Passes specification” is a conclusion the reader should be able to reach from the numbers. Ask for the chromatogram when the assay sits near 50.0% and for the sieve record when the powder is destined for a capsule fill. The lot code, the manufacturing and expiry dates and the pack size belong on the same sheet as the results. ## What moves between batches The assay moves with the ratio of acetate to carrier in the drying feed and with the losses in the dryer. The 50.0–55.0% window is wide enough to matter: a formulator who doses by weight needs about 10% more powder per IU at the low end than at the high end. The carrier lot changes the powder's flow and moisture pick-up even when the assay is unchanged. Loss on drying moves with the carrier and with the drying step, and particle size moves with the mill and the sieve. Colour is less quantitative and often more revealing: a yellow or tan tint can point to heat exposure or oxidation while the assay still passes. A rise in free tocopherol on the chromatogram is the same story told analytically. A trend across lots says more than one result near an edge. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a label claim that has to be defended, or a disputed result. The useful panel is an HPLC run against a tocopheryl acetate standard with a co-injection, a saponification or infrared check that the ester is present, a recalculation of the IU figure, ICP-MS for the metals and the microbiological suite. Ask the laboratory to state its detection limit and to attach the chromatogram. A “not detected” line without a limit is evidence about the method's sensitivity, not about the sample. Chain of custody matters: the sample tested should be the sample retained, and the lot code on the certificate, the pack and the sample should match. ## What to compare between suppliers Put seven lines side by side: the form and isomer; the assay result and method; the IU/g equivalent; loss on drying and its basis; the carrier and its proportion; dispersibility and particle size; and the contaminant and microbiological panels. Two quotations that match on 50% but differ on the form, the carrier or the basis are not describing the same powder. The second layer is traceability. The certificate should name who manufactured the lot, the specification version it was released against, and the pack the lot went into. A correct certificate can still belong to a pouch other than the one on the loading dock. The catalog specification sits on the vitamin E product page. The forms are compared on the grade page; the tests that separate the acetate from other esters are on the identity page; the ordering unit is on the MOQ page. The chromatographic method is described in the HPLC method note, and the release workflow on the quality page. ### 02 Acetate, succinate or oil: choosing a vitamin E grade URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-e/grades/ Reviewed: 2026-11-18 Vitamin E is supplied as an acetate, a succinate or a tocopherol oil, and the three are different label ingredients rather than three concentrations of one material. This catalogue's standard grade is dl-alpha-tocopheryl acetate as a 50% water-dispersible powder; the oil and a granulated powder are available on request. The choice follows the dosage form and the potency per milligram, not the headline percentage. In one lineThe ester, the isomer and the carrier decide the potency, the label and the dosage form; a grade change is a new ingredient, not a new concentration. ## Why the grade is a weighing decision A vitamin E dose is written in IU or in milligrams, and a capsule fill, a tablet blend or a stick pack is weighed in milligrams. The grade converts one into the other. At 500 IU per gram of powder, a 30 IU serving is 60 mg of powder, a 100 IU serving is 200 mg and a 400 IU serving is 800 mg. The same 400 IU from the undiluted acetate oil is 400 mg. The grade question comes before the commercial one: a softgel, a gummy and a drink do not want the same material, and the powder that suits a capsule may be wrong for a clear drink. ## Three families, four potencies Vitamin E forms, their potency and the label name each carries | Form | IU per mg | Commercial grade | Matrix | Label name | DL-alpha-tocopheryl acetate | 1.00 | 50% water-dispersible powder; oil on request | Modified starch and silicon dioxide | DL-alpha-tocopheryl acetate | D-alpha-tocopheryl acetate | 1.36 | Powder or oil | Declared carrier or oil | D-alpha-tocopheryl acetate | D-alpha-tocopheryl acid succinate | 1.21 | Crystalline powder | None, or a declared carrier | D-alpha-tocopheryl acid succinate | D-alpha-tocopherol | 1.49 | Oil | Carrier oil | D-alpha-tocopherol The IU per milligram is a property of the molecule, not of the supplier. One milligram of dl-alpha-tocopheryl acetate is defined as 1 IU; the natural d form carries more potency per milligram because only one of its stereoisomers is present. A 50% powder therefore reads 500 IU/g as the dl-acetate, about 680 IU/g as the natural acetate and about 605 IU/g as the natural succinate. The percentage on the quotation is not a potency until the form is named. The catalogue grade is the first row: the synthetic acetate, 50.0–55.0% by HPLC, which converts to 500–550 IU/g. The window is not a formality; dosing by weight at the low end needs about 10% more powder per IU than at the high end. ## What the powder is made of Tocopheryl acetate is a viscous oil at room temperature, practically insoluble in water. To make it dispersible, the oil is carried on modified starch with silicon dioxide as the glidant, and the result is the white to off-white, free-flowing powder described in this catalogue. The carrier is roughly half the mass. It gives the powder its flow, its dispersion and its dilution factor. The physical limits support the dosage form: 100% through 40 mesh so the powder blends without lumps, loss on drying at or below 5.0% so it does not cake in the pouch, and dispersion in cool water to a milky emulsion rather than a clear solution. The oil on request is the undiluted ester for softgels; the granulated option is a denser, lower-dust powder for a tableting line. The succinate is a different physical system: a crystalline solid with low water solubility, sold as a powder rather than an oil. It suits a dry tablet or chewable where an oil is unwanted, and it does not suit a beverage that has to be free of sediment. The three forms also fail differently: the powder cakes with moisture, the oil oxidises and migrates, and the crystalline succinate is stable dry but slow to dissolve. ## Matching the form to the dosage form Dosage forms and the grade that usually fits them | Dosage form | Usual grade | Why | Softgel | Acetate oil, or a 50% powder in an oil suspension | The fill is already an oil; no carrier is needed | Two-piece capsule | 50% water-dispersible powder | Free-flowing, blends with other powders | Tablet | 50% powder or granulated powder; succinate for an oil-free tablet | Compression tolerance and a dry matrix | Stick pack and drink mix | 50% water-dispersible powder | Disperses in cool water without a high-shear step | Gummy and chew | 50% water-dispersible powder; granulated on request | Disperses in the cook and survives the deposit The dose weight decides whether the grade is practical. A 30 IU gummy needs 60 mg of the 50% powder; a 400 IU capsule needs 800 mg, which is a softgel fill rather than a tablet. A small high-dose tablet needs a more concentrated oil or a different format, not more of the 50% powder. ## What changes when you switch Five things change together, and a purchase order that names only one of them has not specified the material: - The potency per milligram, and therefore the mass weighed per dose. - The label name, because the acetate, the succinate and the tocopherol are separate ingredients. - The matrix: carrier, oil or crystalline solid, and the excipients that go with it. - The stability file, because a powder, an oil and a crystalline solid fail differently. - The process route: blending, compression, cooking or filling. For this catalogue's grade, write: “DL-alpha-tocopheryl acetate 50% water-dispersible powder; tocopheryl acetate 50.0–55.0% by HPLC; 500–550 IU/g; carrier modified starch and silicon dioxide, declared; loss on drying ≤5.0%; 100% through 40 mesh; dispersible in cool water.” For the oil, replace the carrier and the physical lines with the oil specification. For the succinate, change the name, the IU factor and the label entry, and check the permitted list for the market before the formula is fixed. The label names the form: DL-alpha-tocopheryl acetate, D-alpha-tocopheryl acid succinate or D-alpha-tocopherol. The EU declaration is in mg α-TE and the ingredient list uses the permitted-list name; the US panel declares vitamin E in mg with the source in the ingredient list. A change of form changes both lines, even when the IU dose stays the same. ## When not to switch A grade switch is not a sourcing shortcut. Do not substitute one ester for another when the label already names the first: the ingredient list and the certificate would disagree with the drum. Do not put the succinate into a beverage that has to be free of sediment, and do not replace an oil in a softgel with a 50% powder unless the fill can carry the extra carrier mass. In the European Union, the permitted list for food supplements names DL-alpha-tocopheryl acetate and D-alpha-tocopheryl acid succinate, but not the synthetic dl-succinate. A switch that is lawful in one market is not automatically lawful in another, and the label wording follows the list. The acetate versus succinate page sets out that difference in detail. The catalog ranges are on the vitamin E product page. The certificate lines are explained on the COA page, the light and heat limits on the stability page, and the ordering unit on the MOQ page. The assay itself is described in the HPLC method note. ### 03 Vitamin E is sensitive to oxygen and light; the carrier decides the rest URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-e/stability/ Reviewed: 2026-11-18 The acetate ester is more resistant to oxidation than the free tocopherol, but a 50% powder is still a fat-soluble vitamin spread on a starch carrier, and oxygen, light, heat, trace metals and moisture all take it down over time. The pack decides how much of that the lot meets before it is opened; the formula decides what happens after. This page sets out what fails, how it is tested and what to write into the specification. In one lineThe acetate ester resists oxidation better than the free vitamin, but light, heat, trace metals and a wet carrier still decide how long the powder keeps. ## The powder in the unopened pack Dry, the powder is reasonably stable. The acetate group blocks the phenolic hydroxyl that makes the free tocopherol reactive, so the main reactions are slow: hydrolysis of the ester, held back by the low moisture of the carrier, and oxidation of the chromanol ring, held back by the ester and the pack. The specification's loss on drying of ≤5.0% is the control that keeps that water activity low. The carrier is the weak point in storage, not the vitamin. Modified starch picks up moisture from the air, and a powder above the moisture limit cakes, loses flow and gives up its dispersion. Silicon dioxide helps flow but does not stop moisture ingress. A sealed foil pouch with a small headspace is the practical barrier; a fibre drum with a liner is the bulk equivalent. Store cool, dry and dark, keep the pack closed between weighings, and use stock in rotation. Two analytical signs track storage. Free tocopherol rises as the acetate hydrolyses, and colour drifts yellow or tan as oxidation products form. Both can appear while the assay is still inside 50.0–55.0%, which is why the assay alone is a weak stability measure. ## In water and in oil The powder does not dissolve; it disperses. In cool water it forms a milky emulsion of oil droplets stabilised by the carrier, and those droplets have a large surface area exposed to dissolved oxygen. A beverage therefore stresses the vitamin more than the same mass in a sealed pouch, especially when the drink is pasteurised, stored warm or exposed to light. pH matters. Hydrolysis of the acetate is faster at alkaline pH, so a matrix that drifts alkaline shortens the effective life of the ester even when the powder was released correctly. Acidic matrices are slower but not inert, and a high-water-activity gel or syrup gives the reaction more freedom than a dry blend. Trace metals are the other accelerant: iron and copper at low levels catalyse oxidation, and a mineral premix can supply both. In oil, the vitamin is in its natural habitat, but the carrier oil becomes part of the stability problem. A polyunsaturated oil oxidises and takes the vitamin with it, so the peroxide value of the oil phase belongs in the review. In a gummy, the cook temperature, the water activity and the pH all act at once, and the powder's dispersion has to survive a process that a pouch never sees. ## The five factors that decide the loss What degrades vitamin E in a powder and how to limit it | Factor | Effect | Control | Oxygen | Oxidation of the chromanol ring; colour drift | Sealed foil pouch, low headspace, closed pack between weighings | Light | Photodegradation at the surface of the powder | Opaque pack; dark storage; covered hopper | Heat | Faster oxidation and hydrolysis; losses in cooking | Cool storage; short thermal exposure; check the process step | Trace metals | Iron and copper catalyse oxidation | Metal-free contact; review the mineral premix | Moisture and pH | Hydrolysis of the ester; caking; loss of dispersion | Loss on drying ≤5.0%; dry storage; pH of the matrix The five act together, and the weakest one sets the shelf life. A dark, cool, sealed pack removes most of the risk in storage; a warm, clear bottle of an alkaline drink removes almost none of it. A stability programme that tests only the powder in its pouch answers the warehouse question, not the product question. ## How the stability is tested Test the material in the pack it will be sold in, and test the finished matrix separately. The standard design uses three lots, time points at 0, 1, 3, 6, 12, 24 and 36 months, and two conditions: 25 °C at 60% relative humidity for the real-time series, and 40 °C at 75% relative humidity for the accelerated series. The accelerated series supports the assignment; the real-time series assigns it. The panel should follow the certificate where it can: tocopheryl acetate by HPLC, loss on drying, appearance, dispersibility and the impurity or free-tocopherol profile. Add the finished-product tests that matter to the dosage form — potency uniformity, colour and, for a beverage, the dispersion at the end of shelf life. ## What the formula does to the powder A matrix is not a neutral carrier for a vitamin. An acidic stick pack, a gummy cooked at high temperature, a tablet with a mineral premix and a beverage with dissolved oxygen each set their own loss rate. The formulator's question is not whether the powder is stable in the abstract but whether the label claim is still met at the end of the finished product's shelf life. That is where overage is decided. An overage is a calculated addition, based on the measured loss in that matrix, that keeps the label claim true at expiry. It is not a substitute for a stable matrix, and it does not repair a process that destroys the vitamin. Write the target, the overage basis and the test method into the formula record, and test the worst-case pack rather than the most convenient one. ## Assigning and reading the shelf life The shelf life is a property of the material, the pack and the storage condition together. A sealed 1 kg foil pouch of this grade is commonly assigned 24 months; the figure that applies to your lot is the one the supplier's stability data supports for the pack you buy, so confirm it on the technical data sheet rather than assuming it. The certificate carries the manufacturing and expiry dates, and the remaining shelf life on arrival is a legitimate order term. Once the pack is opened, the sealed-pack figure no longer describes the material. Weigh out what the batch needs, close the pouch, keep it dry and dark, and use the remainder within the period your own risk assessment supports. Re-testing an opened pack can confirm that a lot is still inside specification, but it does not extend the assigned shelf life without a protocol that says so. The catalog ranges are on the vitamin E product page. The assay and moisture lines are explained on the COA page; the forms are compared on the grade page; the pack sizes are on the MOQ page. The moisture test is described in the loss-on-drying note, and the release workflow on the quality page. ### 04 Vitamin E 50%: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-e/moq/ Reviewed: 2026-11-18 The minimum order is 1 kg in a foil pouch, and the standard bulk pack is a 25 kg fiber drum. The 1 kg unit exists so a formulator can qualify a released lot in its own matrix before committing to a drum. Lead time is 1–7 days, and a quotation needs six details before it can be firm. In one lineOne kilogram drawn from a released lot is the qualification unit; the pack, the destination and the specification shape the rest of the order. ## Why the minimum is a kilogram One kilogram of the 50% powder carries 500,000 to 550,000 IU. At a 30 IU serving that is more than sixteen thousand servings; at 100 IU it is five thousand; at a 500 mg capsule fill it is about two thousand capsules. That is enough for a trial batch, a stability start and a retained sample, which is what qualification actually requires. The unit is deliberately not a retail pack. A formulator who has only tested a hand sample has tested an aliquot, not a lot; a kilogram drawn from a released lot carries the lot code and can be traced back to the certificate. The 25 kg drum is the production pack, and it is ordered once the trial has confirmed the powder in the matrix. Ordering below a kilogram would break that chain. The material would still be vitamin E, but it would not be a qualification unit, and the first production drum would be a new material to qualify all over again. ## Packs and what the label has to carry The catalogue packs are a 1 kg foil pouch and a 25 kg fiber drum. The pouch is the moisture and light barrier for a small quantity; the drum carries an inner liner for the bulk quantity. Both are labelled with the product name, the form, the carrier, the lot code, the net weight, the manufacturing and expiry dates and the storage condition. The form on the label has to match the form on the certificate, including the dl prefix. The pack is part of the specification, not an afterthought. A powder that passes release in a foil pouch can fail in a clear jar, and a drum that is opened on the factory floor is exposed from the first weighing. If your line needs a different pack, it is a specification change to be agreed before the order, not a detail to be settled at dispatch. ## Lead time and what ships with the lot Lead time is 1–7 days from stock. That figure covers pick, pack and the documents; it does not cover transit, customs or the booking slot your forwarder needs. A first shipment into a new market usually takes longer than the stock figure because the document pack and the destination requirements are new. Every lot ships with a batch COA, a technical data sheet and a safety data sheet. The COA carries the lot code, the assay, the carrier, loss on drying, particle size, the heavy-metal panel and the microbiological results. The technical data sheet carries the catalog specification and the pack; the safety data sheet carries the handling information. Allergen, GMO and origin statements are issued on request and are worth requesting before the first order, because they belong in the brand's own file. ## Six details a quotation needs The six lines that make two quotations comparable | Detail | What to state | Form and grade | DL-alpha-tocopheryl acetate 50% water-dispersible powder, oil on request or granulated on request | Quantity and pack | Number of 1 kg pouches or 25 kg drums; whether a mixed pallet is intended | Destination and Incoterm | Country, city or port, and which party clears and pays the freight | Application | Capsule, tablet, stick pack, gummy or beverage; any carrier or dispersion requirement | Documentation | COA, TDS, SDS, allergen, GMO, origin and the market statement the file has to support | Specification changes | Assay window, loss on drying, mesh, extra tests or a different pack A quotation that comes back without these six is not comparable with one that has them. The form decides the potency, the pack decides the quantity, the destination decides the documents and the application decides whether the standard powder fits at all. ## Samples and the 1 kg qualification The 1 kg pouch is the sample. A smaller hand sample can be useful for a quick dispersion check, but it cannot qualify a lot, because it may not carry the lot code and it may not have been drawn under the same conditions as the production pack. Ask for the sample to be drawn from a released lot and for the lot code to appear on the pouch and the COA. Test the sample in the matrix, not only in water. A powder that disperses in a beaker can still fail in a gummy cook or a tablet blend, and the trial is the point at which the carrier, the mesh and the overage are confirmed. Retain part of the kilogram: it is the reference if a later drum is disputed. ## Terms worth agreeing in writing - The pack, the quantity and the lot or lots to be shipped. - The Incoterm, the named place and which party handles customs. - The minimum remaining shelf life at dispatch, measured from the expiry date on the COA. - The documents issued with the lot, and the language they are issued in. - The window for notifying a deviation, and the retained sample that supports it. - The payment terms and the currency of the invoice. These are the terms that decide whether the delivery is usable, and they are easier to agree before the order than after it. The catalog ranges are on the vitamin E product page; the certificate lines are explained on the COA page; the packs and their limits on the stability page; the market documents on the compliance page. The ordering definitions are in the MOQ glossary entry, and the release workflow on the quality page. ### 05 Where vitamin E is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-e/compliance/ Reviewed: 2026-11-18 DL-alpha-tocopheryl acetate is on the EU list of vitamin forms permitted in food supplements, and it is a lawful dietary ingredient in the United States; the UK applies retained lists that mirror the EU position. Permission is only the first check. The contaminant ceiling, the label declaration and the claim are three more, and the file has to answer all four for the market it is sold into. In one lineThe permitted form, the contaminant ceiling, the label wording and the claim are four separate checks in each market. ## The four checks The first check is the permitted form: which substance, in which ester, is allowed in the category the product sits in. A food supplement, a fortified food and a food additive are different categories, and the same vitamin can enter them through different instruments. The second is the contaminant limit on the product as sold. The third is the label, which has to name the form the market expects and declare the vitamin in the required unit. The fourth is the claim, which is authorised separately from the ingredient. For this material the first check is specific. The catalogue grade is the synthetic dl-alpha-tocopheryl acetate, not the natural d form and not the succinate. Those are separate entries on the lists, and a certificate that says “vitamin E” does not tell the regulatory reader which one is in the drum. The page describes the framework as of this review; the current text in each market decides. ## European Union Directive 2002/46/EC Annex II lists the vitamin and mineral substances permitted in the manufacture of food supplements, and DL-alpha-tocopheryl acetate is on that list, together with D-alpha-tocopheryl acetate, D-alpha-tocopherol and DL-alpha-tocopherol. Regulation (EC) No 1925/2006 Annex II sets the parallel list for addition to foods. The two lists are not interchangeable: a supplement and a fortified food are different categories with different labelling. The label follows Regulation (EU) No 1169/2011. Vitamin E is declared per portion in mg alpha-tocopherol equivalent (mg α-TE) and as a percentage of the nutrient reference value, which is 12 mg. The ester is converted to α-TE with a form-specific factor; confirm the factor the brand uses against the current guidance for this market rather than an old spreadsheet. The ingredient list names the form as it appears on the permitted list. Contaminants in food supplements are governed by Regulation (EU) 2023/915: lead 3.0 mg/kg, cadmium 1.0 mg/kg and mercury 0.10 mg/kg for the product as sold. There is no harmonised EU maximum for total arsenic, so a Member State may apply its own limit and the specification sets one for the material. ## United States Vitamin E is a dietary ingredient, and the acetate is a permitted source. It was marketed before 1994, so no new dietary ingredient notification is required for the form as such. The applicable rules are the dietary supplement cGMPs in 21 CFR 111 and the Supplement Facts requirements in 21 CFR 101.36. The panel declares vitamin E in mg alpha-tocopherol against a Daily Value of 15 mg; the ingredient list names the source, for example “Vitamin E (as dl-alpha-tocopheryl acetate)”. There is no federal maximum for lead in dietary supplements. That does not make lead irrelevant: California Proposition 65 sets its own threshold and may require a warning, and a product inside an EU limit can still be outside a state one. The destination state and the daily dose have to be checked together. A structure/function statement is the brand's responsibility and carries the DSHEA disclaimer; a disease claim is not available. ## The contaminant table Lead, cadmium, mercury and arsenic · food supplements, by market | Element | EU | US | UK | Lead (Pb) | 3.0 mg/kg | No federal maximum; state rules such as Prop 65 may apply | 3.0 mg/kg, retained | Cadmium (Cd) | 1.0 mg/kg | No federal maximum specific to supplements in this review | 1.0 mg/kg, retained | Mercury (Hg) | 0.10 mg/kg | No federal maximum specific to supplements in this review | 0.10 mg/kg, retained | Arsenic (As) | Not harmonised; Member State rules may apply | No federal maximum specific to supplements in this review | Check current UK law The ingredient specification in this catalogue carries its own limits: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg on the powder. Those are material limits, not product limits. The product limit applies to the supplement as sold, after the powder has been diluted by excipients and divided into doses; the two have to be checked together, especially where the vitamin is the main ingredient by weight. At 50% inclusion, the powder contributes half of its own lead figure to the product. ## Labels and claims Vitamin E has authorised claims in the EU register, and each carries conditions on the wording and on the amount in the product. This page does not reproduce them and does not recommend one. The brand has to check the register, the condition attached to the claim, and the daily dose in the finished product before any wording goes on the pack. In the US a structure/function statement needs the DSHEA disclaimer and must not be a disease claim. In the UK the GB register governs; an EU-authorised claim is not automatically available in Great Britain. The ingredient name is not a claim: “dl-alpha-tocopheryl acetate” and “500 IU/g” are specification terms. This supplier makes no health claim, and the brand owner is responsible for every statement on the pack. ## The document pack - Batch COA with assay, identification, loss on drying, carrier, particle size, metals and microbiology. - Specification and technical data sheet naming the form, the isomer and the CAS number. - Safety data sheet in the 16-section format. - Allergen statement that identifies the starch source and the silicon dioxide. - GMO, origin and residual-solvent statements, if the brand's review requires them. - Statement of the regulatory basis for the intended market, and a third-party certificate where one is required. ## What to check before the first order - Is the exact form — dl-alpha-tocopheryl acetate — on the permitted list of the destination market and category? - Do the contaminant results cover the destination limit at the intended daily dose? - Does the label name the form as the market expects and declare vitamin E in the required unit? - Is the α-TE factor the current one for this ester, and is the calculation documented? - Is any claim on the pack authorised, with its conditions met, or is it a structure/function statement with the disclaimer? - Does the document pack name the market it was prepared for? The market pages in the technical library expand the framework: EU regulatory notes, US regulatory notes and UK regulatory notes. The definitions of NRV and Daily Value are in the glossary, the permitted-forms list in the Annex II entry, and the batch file on the quality page. The product itself is on the vitamin E hub. ### 06 How we prove a vitamin E lot is the acetate URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-e/identity/ Reviewed: 2026-11-18 A vitamin E lot is identified in four layers: the documents and the lot chain, the chromatographic identity against a tocopheryl acetate standard, the potency arithmetic that ties the assay to IU, and the carrier and mass balance that describe the powder. A retention time is the centre of that file, but on its own it does not separate the acetate from the free tocopherol, the succinate or a diluted powder. The layers have to agree before the lot is called the acetate. In one lineA retention time alone does not prove the acetate; the ester, the isomer, the potency and the carrier have to agree. ## The four layers of the identity file What each identity layer proves, and what it cannot prove alone | Layer | Evidence | What it leaves open | Documents | CAS 7695-91-2, form, lot code, specification version, pack | A correct paper file can describe another drum | Chromatography | HPLC retention time and spectrum against a tocopheryl acetate standard | A co-eluting substance or a different ester | Potency | Assay percentage, IU per gram, calculation at 1 mg = 1 IU | Free tocopherol can land in the same IU window | Formulation | Carrier, loss on drying, dispersibility, particle size | Whether the oil is the declared ester The layers are not alternatives. A certificate can be genuine and still belong to a different lot; a chromatogram can be genuine and still be run on a standard that is not the acetate; a potency figure can be right and still describe the wrong molecule. The file is complete when the four agree with each other and with the drum. ## The potency arithmetic, and where it stops The assay reports tocopheryl acetate as a mass fraction. At 1 IU per milligram of the dl-acetate, 50.0–55.0% is 500–550 IU/g. That checks the internal consistency of the certificate: a sheet that prints 52% and 500 IU/g does not reconcile at the dl-acetate factor, and a sheet that prints 52% and 707 IU/g is describing the natural d-acetate at 1.36 IU/mg. The arithmetic catches a mismatched form before a sample is opened. It stops short of identity. Free dl-alpha-tocopherol carries about 1.1 IU/mg, so a 50% tocopherol powder reads about 550 IU/g — the same figure as a 55% acetate lot. A succinate at 50% reads about 445 IU/g for the synthetic form and about 605 IU/g for the natural one. The IU windows overlap, and the 50.0–55.0% assay window is wide enough to absorb the difference. Potency narrows the question; the chromatogram and the ester test answer it. The mass balance is the second arithmetic check. At 50% acetate, the carrier and moisture make up the other half; at 55%, a little less. If the certificate reports 50% acetate, 20% carrier and 5% moisture, the reader should ask what the remaining 25% is. A declared carrier that does not close the balance is a formulation to explain, not a rounding difference. ## What XRD and infrared can, and cannot, show X-ray diffraction is the wrong primary test for this powder. The acetate is a liquid carried on modified starch, and the powder is largely amorphous; XRD sees crystalline excipients, mineral fillers or a crystalline sugar, not the ester. A diffraction pattern can confirm that a crystalline solid is present, and it can screen for an unexpected crystalline component, but a clean pattern does not prove the acetate. Infrared spectroscopy is more useful. The acetate ester has a carbonyl band near 1,740 cm⁻¹, the free tocopherol has a phenolic O–H and no ester carbonyl, and the succinate has an acid O–H with a different carbonyl pattern. A saponification step then releases the acid: acetic acid from the acetate, succinic acid from the succinate. The ester test and the chromatogram together are the chemical identity; XRD is a supporting check on the solid matrix. The fourth layer is the isomer. Natural d-alpha and synthetic dl-alpha have the same chromatographic retention on an achiral column, so the distinction needs a chiral separation or a specific-rotation measurement after hydrolysis. A certificate that claims the natural form without one of those tests is making a paper statement, not an analytical one. ## The routes that put another material in the drum Adulteration routes for a vitamin E 50% powder and the marker for each | Route | Why it can pass a quick check | What shows it | Free tocopherol instead of the acetate | Close IU per gram at 50–55% | Retention time, infrared ester band, saponification | Succinate instead of the acetate | Same vitamin, similar powder | Different retention, acid release, IU factor | Dilution below 50% | Assay still inside a loose specification | Assay, carrier proportion, mass balance | Natural labelled as synthetic, or the reverse | Same retention on an achiral column | Chiral analysis, specific rotation, IU factor The motive in each row is the same: to sell a different or more available material under a specification written for the acetate. The defences are also the same: a standard that names the ester, a method that separates it from the neighbours, and a mass balance that closes. A certificate that reports only “vitamin E 50%” gives the buyer no line to check. ## How to write the specification Write the identity into the specification rather than the title: “DL-alpha-tocopheryl acetate 50% water-dispersible powder; tocopheryl acetate 50.0–55.0% by HPLC, expressed on the as-sold basis; 500–550 IU/g; carrier modified starch and silicon dioxide, declared; loss on drying ≤5.0%; 100% through 40 mesh; dispersible in cool water; Pb ≤3, As ≤2, Cd ≤1, Hg ≤0.1 mg/kg; APC ≤1,000 cfu/g, yeast and mould ≤100 cfu/g, E. coli and Salmonella absent.” The form, the isomer and the basis are the three lines that stop a substitution. If the specification says only “vitamin E 50% powder”, a tocopherol or a succinate can be offered against it without a word being untrue. If it names the acetate, the standard and the IU factor, the certificate has to answer the identity question line by line. ## Five questions for the supplier - Which ester and which isomer is the lot — dl-alpha-tocopheryl acetate or something else? - Which standard was the HPLC run against, and can the chromatogram be sent with the certificate? - Does the assay reconcile with the IU figure at 1 IU per milligram, and on what basis is the percentage reported? - What are the carrier, its proportion and the loss on drying for this lot? - Is there any chiral or specific-rotation data, and what does it show about the d and dl forms? Five direct answers amount to an identity file. The COA page shows where each figure sits on the certificate; the grade page places the acetate among the other forms; the acetate versus succinate page separates the two esters; the compliance page covers the label name. The chromatographic method is described in the HPLC note and the spectroscopic check in the FTIR note. ### 02.1 Tocopheryl acetate vs succinate: potency, stability and the label URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-e/grades/acetate-vs-succinate/ Reviewed: 2026-11-18 Tocopheryl acetate and tocopheryl succinate are both esters of alpha-tocopherol, and both are sold as powders, but they carry different acid groups, different potencies per milligram and different names on the label. Acetate is the ester in this catalogue's 50% water-dispersible powder; succinate is a crystalline solid used where an oil is unwanted. A switch changes the IU per gram, the stability file and, in the EU, whether the synthetic form is permitted at all. In one lineAcetate and succinate are different label ingredients with different potencies, and the EU list permits the synthetic acetate but only the natural succinate. ## Two esters of the same vitamin Alpha-tocopherol has a phenolic hydroxyl group. Esterifying it with acetic acid gives tocopheryl acetate; esterifying it with succinic acid gives tocopheryl acid succinate, the monoester that leaves one carboxyl group free. The acetate adds 42 g/mol to the tocopherol and the succinate adds about 100 g/mol, which is why the two molecules weigh 472.74 and 530.8 g/mol respectively. The ester is what the label names. The chemistry sets the physical difference. The acetate is a neutral oil, practically insoluble in water, which is why it is carried on starch for a powder. The succinate is a crystalline solid with a free acid group and low water solubility, which is why it is used dry and why it is a poor fit for a drink. ## Potency per milligram, not per cent IU per milligram, and the IU per gram of a 50% powder | Ester | IU per mg | 50% powder, IU/g | DL-alpha-tocopheryl acetate | 1.00 | 500 | D-alpha-tocopheryl acetate | 1.36 | 680 | DL-alpha-tocopheryl acid succinate | 0.89 | 445 | D-alpha-tocopheryl acid succinate | 1.21 | 605 At equal mass, the acetate carries about 12% more IU than the succinate of the same isomer. The difference is the succinic acid: it adds mass that is not vitamin. A 50% powder therefore reads 500 IU/g as the synthetic acetate, 445 IU/g as the synthetic succinate, 680 IU/g as the natural acetate and 605 IU/g as the natural succinate. The percentage is the same in all four lines; the potency is not. The practical consequence is a fill-weight change. A 400 IU dose is 800 mg of the 50% synthetic acetate powder and about 900 mg of the 50% synthetic succinate powder. If the label dose stays the same, the scoop, the capsule size or the tablet weight has to absorb the difference. A switch made on a percentage-for-percentage basis under-doses or over-doses, and the certificate will not show it. ## Stability: the ester helps, the matrix decides Both esters are more stable than the free tocopherol because the phenolic hydroxyl is blocked. The acetate is neutral, hydrolyses to tocopherol and acetic acid, and is slow to do so in a dry carrier; its main vulnerability is the same as any vitamin E, which is oxidation under light, heat and oxygen. The specification's loss on drying of ≤5.0% and the sealed pouch do most of the work. The succinate is a free acid, so it is the less forgiving of the two in a wet matrix: it dissolves poorly, and where it does dissolve it can shift the local pH as it hydrolyses. In a dry tablet or a chewable base it is stable and has no oil to migrate. In a beverage or a high-water-activity gel, the acetate powder is the better fit, not because the acetate is unconditionally more stable but because the succinate's physical form is wrong for the matrix. Neither ester is a licence to skip the stability work: a powder that keeps in a foil pouch can still lose its label claim in a warm, clear, acidic drink, and the finished product has to be tested in its own pack. ## Which dosage form takes which ester Dosage forms, and the ester that usually fits | Dosage form | Usual ester | Reason | Softgel | Acetate oil | The fill is an oil; no carrier is needed | Two-piece capsule | Acetate 50% powder | Free-flowing and dispersible; the standard grade | Tablet or chewable | Succinate for an oil-free tablet; acetate powder, granulated, for the rest | A crystalline solid compresses without an oil phase | Stick pack or drink mix | Acetate 50% powder | Disperses in cool water; the succinate does not | Gummy or chew | Acetate 50% powder | Disperses in the cook and carries through the deposit The table is about physical fit, not about potency. The succinate's advantage is that it is a solid with no carrier oil and no dispersion step; the acetate's advantage is that it disperses in water and is the form this catalogue stocks. ## The label and the permitted list In the European Union, Directive 2002/46/EC Annex II permits D-alpha-tocopherol, DL-alpha-tocopherol, D-alpha-tocopheryl acetate, DL-alpha-tocopheryl acetate and D-alpha-tocopheryl acid succinate in food supplements. The list does not include the synthetic DL-alpha-tocopheryl acid succinate. That asymmetry matters: the synthetic acetate in this catalogue is permitted, while the synthetic succinate is not, so a switch from one to the other is not a like-for-like substitution in that market. The label declares the vitamin in mg alpha-tocopherol equivalent against an NRV of 12 mg, and the ingredient list names the ester as it appears on the permitted list. In the United States both esters are dietary ingredients, and the Supplement Facts panel declares vitamin E in mg alpha-tocopherol with the source in the ingredient list. In both markets the label has to name the ester; “vitamin E” alone is not a declaration of identity. The IU is a potency expression, not the label unit: a product can carry 500 IU/g on the specification and 12 mg α-TE on the pack. The conversion is form-specific; check the factor rather than carrying an old spreadsheet into a new label. ## When to choose each Choose the acetate when the product is a powder, a capsule, a gummy, a stick pack or a beverage, when the label is written for the dl or d acetate, and when the market is the EU and the form is the synthetic one. Choose the succinate when the product is a dry tablet or chewable that cannot carry an oil, when the label names the succinate, and when the natural d form is acceptable or required. In the EU, do not choose the synthetic succinate for a supplement, because it is not on the permitted list. Write the choice into the purchase order by name: “DL-alpha-tocopheryl acetate 50% water-dispersible powder” or “D-alpha-tocopheryl acid succinate powder”, with the assay, the IU factor, the carrier and the pack. A specification that says “vitamin E 50% powder” leaves both esters available and both potencies unstated. The wider comparison is on the grade page; the certificate lines on the COA page; the identity tests on the identity page; the storage limits on the stability page. The permitted forms are set out on the compliance page, and the catalog range on the vitamin E hub. ### 01 What the COA for calcium citrate actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-citrate/coa/ Reviewed: 2026-11-18 A calcium citrate certificate reports appearance, calcium by complexometric EDTA at 21.0–22.0%, assay on the dried basis at not less than 97.5%, citrate identity by reaction and infrared spectrum, loss on drying at not more than 13.0%, 80 mesh particle size, bulk density 0.60–0.95 g/mL, the heavy-metal panel and microbiology. Those are the catalog limits; the batch COA confirms the lot. The calcium figure is the one buyers read first, and by itself it does not prove the citrate. In one lineA calcium figure near 21% fits the tetrahydrate, but only the citrate identity and the water figure show that the drum is calcium citrate. ## The certificate as a test report A calcium citrate certificate is read in three columns: the parameter, the method that produced the number, and the limit the lot was released against. Appearance and identity are pass or fail; calcium, assay, moisture and the physical results are numbers measured against windows. Identity, assay and water · calcium citrate tetrahydrate | Test | Method | Acceptance range | Appearance | Visual | White, odourless, free-flowing powder | Calcium (Ca) | Complexometric EDTA titration | 21.0–22.0% | Assay (calcium citrate) | Calculated on the dried basis | ≥97.5% | Identification | Citrate reaction and infrared spectrum | Conforms to reference | Loss on drying | 150 °C for 4 hours | ≤13.0% Particle size, density, metals and microbiology | Test | Method | Acceptance range | Particle size | Sieve analysis | ≥95% through 80 mesh | Bulk density | Tapped cylinder | 0.60–0.95 g/mL | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent “Conforms” is right for the identification line, because the test is comparative. It is not right for calcium or assay, where a number and a basis belong on the page. A certificate that reports only “passes specification” gives a conclusion without the evidence. ## EDTA, the dried basis and the water Complexometric EDTA titration measures calcium, not citrate. The titrant binds the calcium ion at an alkaline pH, an indicator marks the endpoint, and the result is calculated as elemental calcium. The method is also blind to the anion: calcium carbonate at about 40% calcium and calcium oxide at about 71% would both titrate. The 21.0–22.0% window is the first identity clue, because calcium citrate tetrahydrate is 21.1% calcium by calculation, anhydrous citrate is 24.1%, and carbonate is 40.0%. The assay is reported on the dried basis. The sample is dried and the result describes the salt without its water; the specification requires not less than 97.5% on that basis. Loss on drying is the other side of the same coin. The tetrahydrate carries four molecules of water, 12.6% of its mass, and the 13.0% limit covers that water plus a small amount of surface moisture. A result near 12% is a hydrate, not a wet lot; a result near 2% with calcium near 24% points to the anhydrous salt. The two figures are not interchangeable. At 12.6% water, 21.1% calcium as sold becomes 24.1% on a dried basis, which is the anhydrous stoichiometric value. That is why the calcium window and the assay window can describe the same lot, one as sold and one after drying. The certificate should state the basis next to each figure. A result copied from one basis into the other is an arithmetic error, not a batch failure. The windows are independent gates, and a lot must meet both. Pushing calcium to 22.0% and loss on drying to 13.0% at once leaves little room for the assay: the dried-basis calcium would sit above the anhydrous figure. Read the three lines together. ## Release limit versus batch result A release limit defines the gate; the batch result records what the laboratory found. Keep them in separate columns, with the method and the basis beside each. A result column that repeats the specification is not a result; a certificate that reports only a conclusion asks for trust without evidence. Not every line needs a number. Identification is comparative, so “conforms” is correct; calcium, assay and loss on drying are numeric and need their own figures. Particle size should name the sieve, and bulk density the method, not only a single number. The reader should be able to reach the release decision from the page: calcium inside 21.0–22.0%, assay at or above 97.5% on the dried basis, loss on drying at or below 13.0%, and the contaminant and micro results inside their limits. If any is missing, the certificate is incomplete rather than failed. ## What moves between batches Calcium and loss on drying move together, in opposite directions, with the hydration and drying route. A lot dried harder loses lattice water, calcium rises on the as-sold basis, and the assay on the dried basis may barely move. That is a hydrate change, not a potency change, and the certificate should be read with both figures in view. Particle size and bulk density come from milling and sieving. The catalog window of 0.60–0.95 g/mL is wide enough that a dense lot and a light lot behave differently in a capsule or a tablet die. Colour and flow are less quantitative: a grey tint can follow the limestone source, and a change in flow often follows moisture. A trend across several lots says more than a single result near an edge. ## When to order an outside test An outside laboratory earns its place on a new source, a first entry into a regulated market, a contested result, or a citrate claim that the supplier's certificate does not carry. The useful panel is targeted: EDTA calcium on a stated basis, citrate identification by reaction and infrared spectrum, loss on drying, and ICP-MS for the heavy metals. An X-ray diffraction scan adds a check for crystalline calcium carbonate or oxide if the calcium figure is high or the citrate identity is weak. Ask the laboratory to report its detection limit for any scan reported as not detected; a line without a limit describes the method, not the sample. The sample tested should be the retained sample, and the lot code should accompany it. ## What to compare between suppliers Compare six lines: the hydrate and formula; calcium with its method; assay with its basis; loss on drying; how citrate is identified; and the contaminant panel. If two quotations match on calcium and diverge on the other five, they describe different powders. The second layer is traceability. The lot code on the certificate should match the drum and the retained sample, and the certificate should name the manufacturer and the plant. A correct certificate can still belong to a different drum, and a certificate without a lot code cannot be tied to the material on the dock. The catalog figures are published on the calcium citrate product page. Salt choice is covered on the grade page; the tests that separate citrate from other calcium powders are on the identity page; release practice is described on the quality page. The titration itself is in the complexometric method note, and the water figure in the loss on drying entry. ### 02 Calcium citrate or calcium carbonate: choosing a calcium salt URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-citrate/grades/ Reviewed: 2026-11-18 Calcium citrate tetrahydrate carries 21.0–22.0% elemental calcium; calcium carbonate carries about 40%. A 500 mg calcium claim therefore needs roughly 2.3 g of the citrate or 1.25 g of the carbonate, which changes the tablet or capsule count, the taste and the acid response before it changes anything else. Both are permitted calcium sources for food supplements; the choice is a dosage-form and label decision, not a purity tier. In one lineCitrate and carbonate are both calcium salts, but each gram carries a different amount of calcium and behaves differently in acid. ## Two salts, not two grades of one These are different materials, not two purities of the same powder. Calcium citrate tetrahydrate is the calcium salt of citric acid, C12H10Ca3O14·4H2O. Calcium carbonate is CaCO3, with one calcium per formula unit instead of three. The carbonate is denser and carries nearly twice the calcium per gram; the citrate carries the citrate anion and four molecules of water. Both are permitted food supplement sources and are sold as powders for capsules, tablets and sticks. The grade question for the citrate is the hydrate — tetrahydrate or anhydrous — and the particle size; for the carbonate it is the crystal form and the density. “Calcium citrate 21%” and “calcium carbonate 40%” are not competing purities. They are different salts with different arithmetic. ## The comparison that matters Calcium citrate and calcium carbonate · what each gram carries | Salt | Elemental Ca | Salt for 500 mg Ca | Acid response | Taste | Fits | Calcium citrate tetrahydrate | 21.0–22.0% | 2.27–2.38 g | Dissolves in dilute acid, no gas | Saline-sour | Capsules, tablets, sticks | Calcium citrate, anhydrous | About 24.1% | About 2.07 g | Dissolves in dilute acid, no gas | Saline-sour | Where mass is tight | Calcium carbonate | About 40.0% | About 1.25 g | Effervesces in acid | Chalky | Compact tablets, effervescent The middle column converts a label claim into a weight of powder, and the weight decides how many units a serving needs. A unit already at its fill limit cannot take the citrate's larger mass without changing the serving size. ## Acid, taste and flow Acid is where the two salts part company most visibly. Calcium carbonate reacts with hydrochloric acid to give calcium chloride, carbon dioxide and water; in a tablet or a stick the gas is the fizz, and in a sealed container it is pressure. Calcium citrate dissolves in dilute acid without gas, because the carbonate is not there. The practical difference is acid-neutralising capacity: carbonate consumes acid as it dissolves, while citrate contributes citrate and buffers. Taste follows the same split. Carbonate is chalky and drying; citrate is saline and sour, and the sour note grows with dose. In a capsule neither taste is noticeable; in a chew or a stick the difference decides whether the format works. A flavour system that masks chalk may not mask the citrate note. Flow and density differ too. The catalog citrate is 80 mesh with a bulk density of 0.60–0.95 g/mL, a window wide enough to cover a light, dusty powder and a denser one. Carbonate is generally denser and flows well, which is why it compresses into small tablets. The citrate's lower calcium content per gram means more powder per unit, so hopper volume and tablet thickness move with the salt. ## What the dosage form does with the difference Start with 500 mg of calcium, a common single-serving figure. At 21.5% calcium the citrate needs about 2.33 g; at 40.0% the carbonate needs 1.25 g. A size 00 capsule holds roughly 600–700 mg of a mineral powder, so the citrate claim runs to three or four capsules while the carbonate claim runs to two. A 1,000 mg tablet of citrate carries about 215 mg calcium; the same weight of carbonate carries about 400 mg. The format then constrains the choice. Effervescent tablets need the carbonate, because the fizz is the carbonate-acid reaction; citrate cannot supply it. A clear or lightly cloudy drink can use citrate if the pH is managed, but its solubility is low and the acidulant has to be part of the trial. A gummy with an acidulant will react with carbonate during cooking, so the gas has to be managed or the salt changed. A stick can carry 2.3 g of citrate, which makes it the natural home for a high-dose citrate claim. None of this is a statement about what the mineral does in the body. It is a statement about mass, gas and taste in the unit the consumer opens. ## Naming the source on the label EU rules require the ingredient list to name the source as listed in Annex II to Directive 2002/46/EC, where “calcium citrate” and “calcium carbonate” are separate entries. The nutrition declaration gives calcium in milligrams and as a percentage of the 800 mg reference intake. In the United States the Supplement Facts panel gives elemental calcium against a 1,300 mg Daily Value, and the ingredient list names the salt. The United Kingdom uses the same 800 mg reference intake in its retained nutrition labelling. Switching salts at a fixed powder weight moves the calcium figure by nearly a factor of two. Switching at a fixed calcium claim moves the powder weight instead. Either way the label, the batch record and the specification change together; a new salt is a new label, not a substitution. ## What changes when you switch Six things move with the salt: the mass per serving; the number of capsules or tablets; the tablet size or stick weight; the taste; the acid response and any gas; and the source name on the label. A seventh, less obvious change is the certificate. Citrate carries a loss on drying near 12% from its water of crystallisation, carbonate has none, so a specification copied across will fail at the first lot. Run a small trial before the label is printed: compress the new mass, taste the new stick, and check the pH and gas in the matrix. A salt swap that looks neutral on paper is a new formulation in the press. The citrate versus carbonate page takes the arithmetic and the acid reaction further. ## Writing the specification Write the citrate specification with the hydrate in the name: “Calcium citrate tetrahydrate, 21.0–22.0% Ca by complexometric EDTA; assay not less than 97.5% on the dried basis; loss on drying not more than 13.0%; citrate identification by reaction and IR; not less than 95% through 80 mesh; bulk density 0.60–0.95 g/mL; Pb ≤3, As ≤2, Cd ≤1, Hg ≤0.1 mg/kg.” Add “no added calcium carbonate, calcium oxide or citric acid” when the citrate identity is the point of the purchase. For the carbonate, write its own calcium window and its own loss on drying, and do not borrow the citrate lines. A specification is a description of one material; a line that fits both is a line that specifies neither. The catalog figures are on the product hub. The certificate lines are explained on the COA page; the market rules that follow the source name are on the compliance page; the hydrate arithmetic is defined in the elemental assay entry. ### 02.1 Calcium citrate vs carbonate: elemental calcium, acid and the label URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-citrate/grades/calcium-citrate-vs-carbonate/ Reviewed: 2026-11-18 Calcium citrate tetrahydrate is 21.0–22.0% calcium and calcium carbonate is about 40%, so a 500 mg calcium claim needs about 2.3 g of the citrate or 1.25 g of the carbonate. The citrate dissolves in acid without gas, the carbonate effervesces, and the label must name whichever salt is in the drum. Those three facts — mass, acid and source — decide most switches between the two. In one lineCitrate carries about 21% calcium and carbonate about 40%, so the same label claim needs roughly twice the citrate mass, and the acid response differs. ## Elemental calcium, converted The conversion is simple arithmetic, and it is where most label errors start. Divide the label claim by the calcium fraction of the salt. At 21.5% calcium, 500 mg of calcium needs 500 ÷ 0.215 = 2,326 mg of calcium citrate tetrahydrate. At 40.0%, the same claim needs 1,250 mg of calcium carbonate. The same sum at 200 mg gives 930 mg and 500 mg. Salt mass for a calcium label claim | Label claim | Citrate tetrahydrate, 21.5% | Anhydrous citrate, 24.1% | Carbonate, 40.0% | 100 mg Ca | 465 mg | 415 mg | 250 mg | 200 mg Ca | 930 mg | 830 mg | 500 mg | 500 mg Ca | 2,326 mg | 2,075 mg | 1,250 mg | 800 mg Ca (EU reference intake) | 3,721 mg | 3,320 mg | 2,000 mg Read the table from the label backwards. A 1,000 mg tablet of calcium citrate carries about 215 mg calcium; a 1,000 mg tablet of calcium carbonate carries about 400 mg. A capsule that holds 600 mg of citrate powder carries about 129 mg calcium and needs four capsules for a 500 mg claim. The salt weight, not the label claim, is what the press and the capsule filler see. Round only at the end. Anhydrous citrate is about 24.1%, and a lot at the low end of the tetrahydrate window is 21.0%. Using 21.5% as a planning figure is reasonable; using it as a specification is not. ## The acid reaction Calcium carbonate reacts with acid: CaCO3 + 2 HCl → CaCl2 + CO2 + H2O. In a stick or a tablet the carbon dioxide is visible as fizz; in a sealed container it is pressure, and in a tablet it can lift the grain. Calcium citrate dissolves in dilute acid without gas, because it contains no carbonate to release carbon dioxide. In a slurry, the carbonate consumes acid and raises the pH as it dissolves; the citrate buffers instead. Taste follows the chemistry. Carbonate is chalky and drying, and it can leave a gritty mouthfeel at high dose. Citrate is saline and sour, and the sour note grows with the dose. In a capsule neither is noticeable; in a chew, a gummy or a stick the difference decides whether the format is acceptable. The acid response also sets the format. An effervescent tablet needs carbonate. A clear acidic drink can use citrate, but its solubility is low and the acidulant has to be tuned. A gummy with an acidulant will react with carbonate during cooking, so either the gas is managed or the salt changes. ## What the mass does to the dosage form Mass drives the unit count. At 500 mg calcium, the citrate is 2.3 g of powder and the carbonate is 1.25 g. A size 00 capsule holds roughly 600–700 mg, so the citrate claim is three to four capsules and the carbonate claim is two. A tablet press can make a 2.3 g tablet, but it is a large one; the carbonate fits a conventional 1.25 g tablet with room for excipients. Sticks carry the mass more easily than capsules. A 2.3 g citrate dose plus flavour and sweetener is a normal stick weight; the same stick with carbonate would carry 1.25 g of salt and need more excipient to fill the same weight. Suspensions behave differently again: the citrate settles more slowly than a dense carbonate, but both need a thickener and a resuspension test. Choose the format before choosing the salt. If the product is a two-capsule serving, carbonate has the mass advantage. If it is an effervescent tablet, carbonate is the only one that fizzes. If it is a high-dose stick with an acidic flavour, citrate fits the chemistry and the taste. ## What the label must name In the European Union the ingredient list names the calcium source from Annex II to Directive 2002/46/EC, and calcium is declared in milligrams and as a percentage of the 800 mg reference intake. In the United States the Supplement Facts panel declares elemental calcium against a 1,300 mg Daily Value, and the ingredient list names the salt. The United Kingdom uses the 800 mg reference intake in its retained nutrition labelling. The source name is not interchangeable. A product made with calcium carbonate cannot declare calcium citrate, and a blend must name both sources. If the salt changes and the powder weight stays the same, the calcium figure moves by nearly a factor of two; if the calcium claim stays the same, the powder weight moves. Either change needs a new label and a new batch record. A source claim on the front of the pack should match the ingredient list. “Made with calcium citrate” is a statement about the source; if carbonate is also present, the front and the ingredient list disagree. The reference intake entry explains how the percentage is calculated. ## Choosing between them When each salt fits the brief | Situation | Citrate | Carbonate | High calcium claim in few units | More mass, more units | About 40% Ca, compact | Effervescent tablet | No gas | Supplies the carbon dioxide | Acidic drink or stick | Dissolves without fizz; sour note | Reacts, foams, chalky | Chalky taste unacceptable | Saline-sour | Chalky | Non-acidic matrix | Trial the pH | Trial the pH and the gas | Label must name citrate | The only option | Cannot be substituted The table is a starting point for a trial, not a rule. What must not happen is a silent substitution: the label, the specification and the certificate have to name the same salt. ## Specifying either salt Write the citrate specification with the hydrate and the mesh: “Calcium citrate tetrahydrate, 21.0–22.0% Ca by complexometric EDTA; assay not less than 97.5% on the dried basis; loss on drying not more than 13.0%; citrate identification by reaction and IR; not less than 95% through 80 mesh; bulk density 0.60–0.95 g/mL; Pb ≤3, As ≤2, Cd ≤1, Hg ≤0.1 mg/kg.” For the carbonate, write its own calcium window, its own loss on drying and its own acid reaction. Add a clause that names the salt and excludes substitution: “Calcium carbonate; no calcium citrate or calcium oxide added.” The same clause in reverse belongs in the citrate specification. Switching salts is a change control, not a purchasing choice. Re-run the fill weight, the taste, the pH and the label; then reissue the specification. The certificate for the new salt will not match the old specification. The grade page covers the wider choice of hydrate and mesh; the COA page lists the release limits; the compliance page covers the source list and the label rules; the product hub carries the catalog specification. ### 03 Calcium citrate is stable dry; moisture and the matrix decide the rest URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-citrate/stability/ Reviewed: 2026-11-18 Calcium citrate tetrahydrate is a crystalline solid with its water built into the lattice, and it is stable in a sealed pack at normal warehouse temperatures. The failures that matter are physical: surface moisture and caking, a hydrate shift under sustained heat, and a matrix that changes pH or pulls the calcium into an insoluble salt. Shelf life is assigned from stability data on the marketed pack, not from the assay alone. In one lineThe powder keeps when it stays dry and sealed; the matrix, not the salt, is usually what limits shelf life. ## The dry solid The dry solid is the easy part. The tetrahydrate is not deliquescent, it does not lose its water at room temperature, and it can be stored as a powder for years in a sealed container. Its water of crystallisation is about 12.6% of the mass, and the loss-on-drying limit of 13.0% leaves only a small margin for surface moisture. That margin is the one to watch: a pouch left open in a humid room takes up water on the surface long before the lattice changes. Caking is the visible result. The powder is 80 mesh and its bulk density runs from 0.60 to 0.95 g/mL, so a light lot has more surface and more air and will pick up moisture faster than a dense one. Stacked drums, pallet pressure and temperature cycling add the mechanical part. Store sealed at 15–25 °C, below about 60% relative humidity, off the floor and out of direct sun. A 25 kg fiber drum with a food-grade polyethylene liner and a 1 kg foil pouch both do the same job at different scales. An opened pouch should be resealed, kept dry and used within the period written on the label. If the plant repacks, the new container needs the same moisture barrier and a lot label; a clear jar on a bench is not a pack. The loss on drying entry explains why the figure is high for a hydrate and low for an anhydrous salt. ## In solution and slurry In water the salt is sparingly soluble, at roughly 1 g/L, and the solubility is pH dependent. In dilute acid it dissolves readily; near neutral pH the calcium and citrate can leave solution as the salt. That behaviour matters more in a drink than in a capsule. An acidic beverage keeps more of the calcium in solution, because citrate is protonated and calcium-citrate complexes form. A neutral or lightly buffered drink is closer to the precipitation edge, and a clear product needs a trial rather than an assumption. A suspension avoids the question by keeping the powder dispersed, but it needs a stabiliser and a resuspension check. Carbonate would react with the acid and release gas; citrate will not, which is one reason a citrate drink does not fizz. pH also moves the taste. The citrate note is saline-sour and becomes more noticeable as the dose rises, so a high-dose stick needs a flavour system that carries it. Buffering from the citrate itself can lift the pH of a weakly acid mix, which is a formulation effect to measure, not a stability defect. ## What actually moves the material What moves calcium citrate in storage and in formula | Factor | Effect | Control | Relative humidity | Surface moisture, caking, flow loss | Sealed liner; below 60% RH; reseal opened packs | Sustained heat | Lattice water lost; LOD falls, as-sold Ca rises | Keep below the drying range; check transport | Acid | Dissolves; citrate complexes; pH shifts | Trial the acidulant and the pH | Phosphate or sulfate | Calcium salt precipitates | Check the formula for competing anions | Compression | Capping, lamination, density change | Optimise the tablet force and lubricant | Packaging | Moisture and odour ingress | Foil pouch, lined drum, intact seal The first two are storage, the next two are formula, and the last two are process and packaging. A stability failure usually belongs to one group, and the group tells you which file to open. ## A stability protocol A workable protocol uses two conditions and the marketed pack. Long-term: 25 °C and 60% relative humidity. Accelerated: 40 °C and 75% relative humidity. If the material is sold into a hot, humid market, add 30 °C and 65% relative humidity as an intermediate condition. Timepoints of 0, 3, 6, 12 and 24 months cover the usual retest period; add 36 months if that is the target. At each point test calcium by EDTA, loss on drying, citrate identification, particle size, bulk density, microbiology and the heavy-metal panel. The container must be the one that will be sold: a foil pouch and a fiber drum do not have the same moisture barrier, and a result from one does not transfer to the other. Accelerated data predict; long-term data assign. A 40 °C result that holds for six months is useful, but the shelf life should rest on the long-term series. Photo stability is only needed for a transparent pack. ## The matrix decides more than the drum In a tablet, compression and the lubricant control capping and disintegration; a dense citrate lot may need a different force from a light one. In a capsule, the excipients' own hygroscopicity can pull water into the fill. In a stick, the acidulant, the flavour and the sweetener set the pH and the taste. In a gummy, water activity and pH decide whether the citrate stays in solution or crystals form, and an acidulant will react with any carbonate in the blend. An effervescent tablet is the one format where the salt choice is forced: the fizz comes from carbonate plus acid, and citrate cannot replace it. A suspension needs a thickener and a settling test. The common thread is that the citrate is a buffer and a sparingly soluble salt, so pH and water are the two variables to measure in every matrix. Keep the finished-product trial separate from the raw-material file: a drum can pass 24 months sealed and still produce a tablet that picks up moisture from an excipient. The two answer different questions. ## Assigning a shelf life A sealed foil pouch or lined drum commonly carries a 24-month retest period, and longer periods are possible when the long-term data support them. The number on the specification has to come from the supplier's stability file, not from the catalog range. The file should name the pack, the conditions, the timepoints and the tests, and it should be read together with the batch COA. An opened pack has a shorter working life and should be labelled with a use-by date after opening. Transport is a separate stress: a container that sits on a dock in summer can see 50 °C, and the loss on drying will show it before the calcium does. A retest on arrival is sensible insurance for a first shipment. The limits the file protects are listed on the COA page; the salt and matrix choice is on the grade page; pack sizes are on the MOQ page; the catalog figures are on the product hub. ### 04 Calcium citrate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-citrate/moq/ Reviewed: 2026-11-18 Calcium citrate leaves the warehouse as a 1 kg foil pouch or a 25 kg fiber drum. The 1 kg minimum is a qualification unit: enough for identity checks, a tableting trial and a retained sample, without committing to a drum before the formula is fixed, while the 25 kg drum covers production. Standard 80 mesh material is quoted at 1–7 days; a custom mesh or granulation adds time. In one lineThe 1 kg pouch from a released lot is the qualification unit; a 25 kg drum is a scale decision made after the trial. ## Why 1 kg is the unit A minimum order is often read as a commercial threshold. Here it is a sampling decision. One kilogram of an 80 mesh powder is enough for several bench trials, a short stability check and a retained sample, and it comes from a released lot with its own certificate. That lets a formulator test the actual material before the first drum is ordered. The 1 kg unit does not remove the need to qualify the production lot. If the trial succeeds and the order moves to a 25 kg drum, the drum may carry a different lot code. Ask for the lot on the quotation, compare its certificate with the sample's, and bridge the two with a short identity check rather than assuming the powder is the same. A 1 kg order is not a volume tier and does not work like one; the quotation states the terms for the quantity requested. What the small pack buys is evidence, not scale. ## Packs and labels Standard packs for calcium citrate | Pack | Construction | Use | Handling | 1 kg | Foil pouch with food-grade liner | Sample, bench trial, small batch | Reseal; keep dry after opening | 25 kg | Fiber drum with polyethylene liner | Production | Palletised; check the liner on receipt Both packs carry the product name, the hydrate, the mesh, the lot code, the net weight, the production and expiry dates and the storage statement. The lot code is the link between the drum, the certificate and the retained sample; a pack without one cannot be traced. Granulated material and a milled 100 mesh are quoted on request. They are separate specifications, not a setting on the same pack, and each needs its own certificate. The grade page explains which of those variants change the powder and which only change the handling. ## Lead time Standard 80 mesh calcium citrate is quoted at 1–7 days. The clock covers picking, documentation and dispatch; transit is separate, and the Incoterm decides where the seller's responsibility ends. A custom mesh or granulation needs a production slot and a fresh certificate, so the lead time is longer and should be confirmed in writing. Documentation can set the date as much as production does. A certificate with a method the buyer's QA has not seen, a missing allergen statement or a specification that needs a counter-signature can hold a shipment after the drum is ready. Send the document list with the enquiry so the file can be prepared in parallel. ## What a quotation needs Six details a calcium citrate quotation needs | Detail | What to state | Why it changes the quote | Product and grade | Hydrate, mesh, any granulation | A quote for “calcium citrate” alone is a quote for a family | Quantity | Kilograms or drums | Sets the pack and the lot allocation | Packaging | 1 kg pouch or 25 kg drum | Changes handling, label and freight | Destination and Incoterm | Country, port or door, named place | Sets the delivery point and the documents | Documents and tests | COA, TDS, SDS, statements, third-party tests | Defines the release file and the lead time | Required date | Delivery or ship date | Tests whether the standard lead time fits The hydrate and the mesh are the two that get left out most often. “Calcium citrate, 21%” does not say tetrahydrate or anhydrous, and it does not say 80 mesh or 100 mesh. Two suppliers can answer that enquiry with two different powders and both be right. ## Samples A sample request should name the test it is for: identity, tableting, taste, or a stability check. The 1 kg pouch is the smallest standard pack and can serve as the sample. Ask for the lot code and the certificate with the sample, and keep a portion as the retained sample. A sample from one lot does not qualify the next. Use it as a check on the specification and the supplier, then qualify the first production drum on its own certificate. If the sample and the drum differ, the sample is the reference, not the excuse. The tests to run on the sample are the ones on the COA page: calcium by EDTA, citrate identity, loss on drying and the contaminant panel. A taste and tableting trial belongs beside them, because a certificate cannot tell you how the powder runs. ## Terms to settle before the PO Before the purchase order, settle the commercial and quality terms: payment method and currency; Incoterm and named place; quantity tolerance; the retest or expiry date required on arrival; the document pack; the retention sample; and the change-control route for a mesh, hydrate or supplier change. Write the specification into the purchase order, not into a side email. A PO that says “calcium citrate” and a specification that says “tetrahydrate, 80 mesh, 21.0–22.0% Ca” are two different contracts. The certificate released against the PO should quote the specification revision it was tested against. The pack, the lot and the certificate are one chain. The stability page covers the storage conditions that keep the chain intact; the product hub carries the catalog specification; the MOQ entry defines the term as it is used here. ### 05 Where calcium citrate is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-citrate/compliance/ Reviewed: 2026-11-18 The European Union, the United States and the United Kingdom all list calcium citrate as a permitted calcium source for food supplements, but permission is only the first of four checks. The contaminant ceilings, the label wording and the claim rules sit in separate instruments, and each needs its own evidence in the file. A supplier certificate answers the identity and purity questions; it does not answer the permission, label or claim questions for the finished product. In one lineBeing on the permitted list is the start of the file, not the end of it: contaminants, label and claims are checked separately. ## Four checks, one file Four questions decide whether a calcium citrate supplement can be sold. Is the salt a permitted source in the market? Are the contaminants inside the ceiling at the real dose? Does the label name the source and declare the calcium correctly? Is the claim one the market allows? The four are independent: a permitted salt can fail the contaminant check, and a compliant label can carry a claim that is not authorised. The ingredient is a food supplement ingredient, not a drug. That matters because the permission route, the labelling route and the claim route all follow the food framework, and none of them accepts a disease claim. The United Kingdom keeps a retained version of the permitted-source list through the Food Supplements (England) Regulations 2003 and the devolved equivalents, so a UK launch checks that list rather than the EU text. The source name and the 800 mg reference intake carry over; confirm the current GB wording before printing. ## European Union Directive 2002/46/EC sets the framework for food supplements in the European Union, and Annex II lists the vitamin and mineral substances that may be used, as amended by Commission Regulation (EC) No 1170/2009. Calcium citrate appears on that list as a calcium source. The entry permits the source; it does not replace the Member State notification, the contaminant file or the label rules. Regulation (EU) No 1169/2011 governs the nutrition declaration. Calcium is declared in milligrams and as a percentage of the 800 mg reference intake for adults. The source is named in the ingredient list as the law names it. Regulation (EU) 2023/915 sets the contaminant maxima for food supplements, and Regulation (EC) No 1924/2006 governs claims; only claims on the authorised list may be used. The same substance also has an additive identity, E 333(iii) tricalcium citrate, but an additive entry is not a substitute for the nutrient-source entry. Check the current consolidated text before a launch: the annexes are amended, and the Member State notification is a national step. The EU regulatory summary gathers the instruments in one place, and the Annex II entry explains what the list does and does not cover. ## United States In the United States calcium citrate is marketed under DSHEA as a dietary supplement ingredient. The seller's file should establish the lawful dietary-ingredient basis for the intended use rather than assume it. Premarket approval is not part of the route, but current good manufacturing practice under 21 CFR 111 is, and so is the label. The Supplement Facts panel gives elemental calcium; the Daily Value is 1,300 mg for adults and children aged four and older, and the ingredient list names the salt. A structure/function statement is the brand's responsibility and must carry the DSHEA disclaimer; a disease claim is not available. California Proposition 65 runs in parallel and is triggered by the daily dose, not by the concentration alone. The US regulatory summary sets out the route, and the Proposition 65 entry explains the exposure calculation. ## The contaminant table Supplement contaminant ceilings by market, current at this review | Element | EU | US | UK | Lead | 3.0 mg/kg in the product as sold | No federal limit for supplements; state rules apply | Retained ceiling; verify current UK law | Cadmium | 1.0 mg/kg | No federal limit for supplements | Retained limit | Mercury | 0.10 mg/kg | No federal limit for supplements | Retained limit | Arsenic | No EU-wide figure for supplements; national rules vary | No federal limit for supplements | Verify current UK law The catalog specification is Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg. Those numbers look like the finished-product ceilings, but they apply to the powder. The dilution factor decides whether they are enough. If calcium citrate is 90% of the serving, the raw material sits close to the finished limit; if it is 20%, the other ingredients carry most of the mass and the raw material can be several times the finished limit. Do the arithmetic before ordering: scale the raw-material result by the salt's fraction of the serving, then compare it with the finished-product ceiling. A drum can pass while the finished supplement fails at the dose. ## Claims The European Union authorises calcium claims in Regulation (EU) No 432/2012, and each carries conditions; they are nutrition claims, never disease claims. In the United States a structure/function statement belongs to the brand and must be truthful, substantiated and followed by the disclaimer. Nothing on this page makes a health claim for calcium citrate. The pages publish the specification, the methods and the regulatory framework; the claim is the brand's to make and the market's to permit. A sentence such as “calcium citrate is used in capsules and tablets” describes the material and is not a claim. ## The document file - Batch COA covering calcium, assay, loss on drying, citrate identity, contaminants and microbiology. - Specification and technical data sheet naming the hydrate, the mesh and the bulk density. - Safety data sheet in the 16-section format. - Allergen, GMO, origin, irradiation and solvent statements. - Stability summary for the pack that will be shipped. - The US dietary-ingredient basis and the current UK position. - Halal or kosher certificates only where the label claims them, and a third-party test where the review calls for one. Keep the file version-controlled. A specification revision and a certificate that quotes an older revision is a documentation gap, even when the numbers pass. ## Before the first order - Is calcium citrate a permitted calcium source in the destination market, and is the national notification done? - At the real dose, do the contaminant results fit under the finished-product limit? - Does the label name the source and declare calcium against the right reference intake? - Is the claim authorised, or is it a structure/function statement with the disclaimer? - Does the file include the US dietary-ingredient basis and the current UK position? - Do the specification revision, the COA and the label agree on hydrate, mesh and calcium? The identity page covers the tests behind the certificate, the grade page covers the salt and hydrate choice that drives the label arithmetic, and the product hub carries the catalog specification these checks are run against. The UK position is summarised in the UK regulatory note. ### 06 How we prove a calcium citrate lot is the citrate URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-citrate/identity/ Reviewed: 2026-11-18 Four tests stand between a drum and the claim that it is calcium citrate: appearance and solubility, calcium by complexometric EDTA, citrate identity by reaction and infrared spectrum, and water of crystallisation by loss on drying. A calcium result near 21% is necessary but not sufficient, because calcium carbonate at about 40% and calcium oxide at about 71% would also titrate. The citrate and water results are what separate the salt from the other calcium powders. In one lineCalcium proves the element, not the salt; citrate identity, water of crystallisation and a contaminant screen prove the material. ## Four layers of proof The four identity layers for calcium citrate | Layer | Test | What it shows | What it misses | Appearance and solubility | Visual; water and dilute acid | White powder, sparingly soluble in water, soluble in acid | Says little about the anion | Calcium | Complexometric EDTA | 21.0–22.0% Ca | Any calcium salt titrates | Citrate identity | Reaction and infrared spectrum | Citrate present; spectrum matches reference | Reaction alone is a screen | Water | Loss on drying at 150 °C | 10–13% for the tetrahydrate | Covers surface moisture too Run the four in that order. The calcium figure tells you which family of salts is plausible; the citrate test tells you whether the anion is there; the water figure tells you whether the hydrate is the one on the label. A contaminant screen sits beside them: ICP-MS for the heavy metals and XRD for crystalline carbonate or oxide. ## The calcium-to-citrate ratio The tetrahydrate has a fixed 3:2 calcium-to-citrate ratio. Three calcium ions balance two citrate anions, and the formula is C12H10Ca3O14·4H2O. On a mass basis that is about 21.1% calcium and 66.3% citrate ion, with 12.6% water. The molar ratio, 1.5 calcium per citrate, is the arithmetic that ties the two assays together. If a lot reports 21.5% calcium and 66.3% citrate, convert both to moles per 100 g: calcium 21.5 ÷ 40.078 = 0.537 mol, citrate 66.3 ÷ 189.1 = 0.351 mol, ratio 1.53. A ratio near 1.5 is consistent with the salt. A high calcium with low citrate points to carbonate or oxide; a low calcium with high citrate points to added citric acid. A ratio below 1.5 with normal calcium points to added citrate; a ratio above 1.5 with normal calcium points to a calcium salt that is not citrate. The citrate figure is not always on a routine certificate, which reports identification rather than a quantitative citrate assay. If the ratio is part of the purchase decision, ask for citrate by HPLC or titration and state the method. Without it, the identity rests on the reaction and the IR, which prove presence but not proportion. ## IR, XRD and the crystalline form Infrared spectroscopy reads the functional groups. A citrate spectrum shows carboxylate stretching in the 1,600–1,400 cm⁻¹ region and the O–H envelope of the hydrate, and the lot spectrum is compared with a reference standard. The comparison is the confirmatory step; a visual match on a printout is not enough. X-ray diffraction reads the crystal. The tetrahydrate has its own pattern, and the scan can also show crystalline calcium carbonate as calcite or calcium oxide as lime. Calcite has a strong reflection near 29.4° two-theta, and lime has its own set; both are distinguishable from the citrate pattern. Ask for the detection limit with any “not detected” statement, because a scan without a limit says nothing about a small addition. Loss on drying is the practical hydrate test. The specification limit is 13.0%, and a result between about 10% and 13% is the tetrahydrate. An anhydrous citrate would report a much lower loss and a calcium figure near 24%. The two results, calcium and loss on drying, are enough to separate the hydrate from the anhydrous salt in most cases; the XRD note explains when a crystal scan adds to them. ## The three common adulterants Calcium carbonate is the first. It carries about 40% calcium, has no citrate, holds no water of crystallisation, and effervesces in acid. A blend of citrate and carbonate can be tuned to land inside the 21.0–22.0% calcium window, so the calcium figure alone will not catch it. The citrate assay, the loss on drying and an XRD scan for calcite do. Calcium oxide is the second. It carries about 71% calcium, reacts with water to form the hydroxide, and gives a strongly alkaline slurry. A small addition lifts the calcium figure and the pH at the same time. Lime has its own XRD reflections, and a pH check on the slurry is a quick screen. Citric acid is the third. It raises the citrate result without adding calcium, so the calcium-to-citrate ratio falls below 1.5. It also lowers the pH of a slurry and adds a sharp acid taste. A citrate assay interpreted without the calcium figure can miss it, which is why the ratio belongs beside both. Phosphate and sulfate are less common and are caught by a phosphate or sulfate test if the supplier's specification does not already exclude them. The point of the list is not to test for everything; it is to test for the additions that the calcium figure cannot see. ## How to write the specification - “Calcium citrate tetrahydrate, C12H10Ca3O14·4H2O, CAS 813-94-5.” - “Calcium 21.0–22.0% by complexometric EDTA; assay not less than 97.5% on the dried basis.” - “Loss on drying not more than 13.0% (150 °C, 4 hours), consistent with the tetrahydrate.” - “Citrate identification by reaction and IR, conforms to reference; citrate content by HPLC on request.” - “XRD screen: no crystalline calcium carbonate or calcium oxide detected; detection limit reported.” - “No added calcium carbonate, calcium oxide or citric acid.” A specification that names only calcium and mesh is a specification for a calcium powder, not for calcium citrate. The hydrate, the citrate identity and the adulterant clause are what make it specific. ## Five questions for the supplier - Which hydrate is this lot, and what loss on drying does it report? - What is the calcium result and method, and on what basis is it calculated? - Is citrate identity by reaction and IR on the certificate, and can you supply a citrate assay? - Is there an XRD screen for calcite and lime, and what detection limit does it state? - Is any carbonate, oxide or citric acid added at any stage, and what evidence supports the answer? Five direct answers amount to a specification; a calcium percentage does not. Each figure is tied to a certificate line on the COA page, the salt choice is set out on the grade page, the substitution risk is covered on the citrate versus carbonate page, and the catalog limits sit on the product hub. The FTIR note explains what the spectrum comparison can and cannot show. ### 01 What the COA for chromium picolinate actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/chromium-picolinate/coa/ Reviewed: 2026-11-18 The certificate for a chromium picolinate lot reports appearance, chromium by ICP-OES, identification by IR and HPLC, loss on drying, residue on ignition, particle size, the heavy-metal panel and microbiology. Each line carries the method and the release limit, and the batch result belongs beside the limit rather than in place of it. The chromium figure is 12.2–12.4% as elemental Cr; the picolinate identity is a separate line because a chromium number cannot name the ligand. In one lineA chromium assay measures the metal, not the molecule; the certificate has to pair the 12.2–12.4% figure with the picolinate identity, the moisture limit and the release result for that lot. ## The certificate as a test report A useful certificate can be read line by line. For each parameter the reader needs the test, the method and the release limit; the fourth column, the batch result, is the one that belongs to the drum in front of them. A document that reprints the specification in the result column has not reported a lot. Identity, assay and physical limits · chromium picolinate | Parameter | Method | Release limit | Appearance | Visual | Purple-red to red-brown crystalline powder | Chromium (Cr) | ICP-OES | 12.2–12.4% | Identification | IR and HPLC | Conforms to reference | Loss on drying | Gravimetric | ≤0.5% | Residue on ignition | Gravimetric, ignition | ≤0.2% | Particle size | Sieve analysis | ≥95% through 40 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent The catalog limits above are the release gates. The batch COA is the document that confirms a particular lot against them, and the lot code has to match the certificate, the pack and the retained sample. ## What the 12.2–12.4% chromium figure measures Chromium picolinate is C18H12CrN3O6, formula weight 418.31. The chromium fraction of the pure complex is 12.43%, so the catalog window of 12.2–12.4% spans roughly 98.2–99.8% of the theoretical chromium content. That is a narrow window for an elemental assay, and it is deliberately narrow: at this purity the chromium figure doubles as a check on the complex content. It is only a check if the identity lines pass. ICP-OES measures total chromium after digestion; it does not see the picolinate ligand, and it cannot tell chromium(III) from chromium(VI). The article is the trivalent complex; the oxidation state is a property of the declared molecule and the route, not a second reading on the same line. Where a customer's specification requires a Cr(VI) result, it is a separate test with its own detection limit. A drum of chromium chloride diluted to 12.3% chromium would satisfy the elemental window and fail the IR and HPLC lines. That is why the certificate needs all three: chromium, identification and the purity limits. Do not confuse this figure with a compendial assay. A monograph may express the assay as the complex on the dried basis, with a 98.0–102.0% window. The catalog figure is elemental chromium by ICP-OES. Both are legitimate, but they are not the same number and should not share one line. ## Release limit versus batch result The release limit is the boundary the lot was accepted against; the batch result is what the laboratory measured. Both belong on the page, in separate columns, with the method beside them. A result equal to the midpoint of the specification is not a result; it is the gate copied across. Some lines are one-sided. Loss on drying is a ceiling, residue on ignition is a ceiling, and the heavy-metal and microbiological limits are ceilings. Chromium is a window, and identification is a pass or fail. The certificate should not turn every line into a range simply because the specification has one. A chromium result near the middle of the window and an LOD well below the ceiling tell the reader more than two ticks in a “pass” column. The same discipline applies to the methods. ICP-OES is not a species-specific method; IR is a comparison against a reference spectrum; HPLC has to state whether it measures free picolinic acid or total picolinic acid after release. A method name without a basis is only half a line. ## What moves between batches The chromium assay moves with the reaction, the crystallisation and the drying step. The window is narrow enough that a drift from the top of the window toward the bottom is worth a conversation even though both results pass; a trend across three lots says more than any single result near an edge. Loss on drying moves with the drying end-point and with the pack; residue on ignition moves with the inorganic content left after ignition, so it is read beside the chromium figure rather than as a purity number. Colour is the least quantitative line and often the first visible one. The specification allows purple-red to red-brown, so a shade difference alone is not a rejection; a batch record that explains it is better evidence than a photograph. Particle size moves with milling and sieving, and it changes flow and blend behaviour rather than the assay. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a disputed result, or a form claim that the supplier's own certificate does not prove. The useful panel is not a full repeat of the certificate: ICP-OES for chromium, ICP-MS for the heavy-metal panel, IR and HPLC for the picolinate, and a Cr(VI) screen where the specification calls for one. Ask the laboratory to report its detection limit for any “not detected” line. A Cr(VI) result without a limit says something about the method, not about the sample. The same applies to dye screens and to the HPLC basis. Chain of custody matters as well: the sample tested should be the sample retained, and the lot code should travel with it. ## What to compare between suppliers Put six lines side by side: the declared species; the chromium result and method; the identity methods and their results; LOD and residue; any dilution, carrier or second chromium source; and lot traceability from certificate to pack. Two quotations that agree on chromium but diverge on the other five are not describing the same powder. The catalog specification sits on the chromium picolinate product page. The tests that separate the picolinate from a chromium salt are on the identity page; the source comparison is on the grade page; the ICP-OES method is described in the method note; the release workflow is on the quality page. ### 02 Chromium picolinate, chloride or polynicotinate: choosing a chromium source URL: https://nutrition.rainwoodbio.com/products/minerals/chromium-picolinate/grades/ Reviewed: 2026-11-18 Chromium picolinate, chromium chloride and chromium polynicotinate are three different label ingredients, not three grades of the same chromium. The picolinate carries 12.2–12.4% elemental chromium, the chloride hexahydrate about 19.5%, and the polynicotinate a supplier-defined figure near 10%. Solubility, moisture behaviour and permitted-market status differ with the compound, so the choice starts with the dosage form and the label, not with the chromium percentage alone. In one lineThe source is part of the label and part of the stability file; switching from picolinate to chloride changes the powder weight, the moisture sensitivity and, in the EU, whether the form is on the permitted list. ## The source is the ingredient Chromium is the nutrient on the panel; the compound is the ingredient on the label. “Chromium 200 µg” does not say which powder was weighed, and the three sources behave differently in a capsule, a stick pack and a drink. The differences that matter at a microgram dose are the chromium fraction, the solubility, the moisture pickup and the regulatory listing of the form. The fraction sets the powder weight. At 12.3% chromium, 200 µg of chromium is 1.63 mg of picolinate. At 19.5%, the same 200 µg is 1.03 mg of chloride hexahydrate. Both weights are small enough that a manufacturer will usually handle a dilution; the dilution, not the drum, is what the capsule contains. ## Three sources side by side Three chromium sources · content, handling and EU listing | Source | Chromium content | Solubility | Dry behaviour | EU permitted list | Chromium picolinate | 12.2–12.4% (ICP-OES) | Sparingly soluble in water | Stable crystalline solid; LOD ≤0.5% | Named in Annex II | Chromium(III) chloride hexahydrate | About 19.5% | Freely soluble in water | Hygroscopic; needs a moisture-tight pack | Chromium(III) chloride is named | Chromium polynicotinate | Supplier-defined; often near 10% | Depends on the complex and carrier | Depends on the carrier | Not named in Annex II The table is a starting point, not a ranking. A polynicotinate is a family rather than a single formula; the niacin content, the chromium content and the carrier vary by supplier, so the COA has to define the article before a specification can. The picolinate and the chloride are single, named compounds with published formulae, which is why their arithmetic can be written down. ## Solubility, moisture and flow Solubility separates the three more sharply than the chromium figure does. Chromium chloride hexahydrate dissolves freely and gives an acidic solution; it is the easiest source to put into a liquid and the hardest to keep dry. Chromium picolinate is sparingly soluble at neutral pH; it disperses rather than dissolves, which is acceptable in a capsule or a suspension and awkward in a clear drink. Polynicotinate solubility depends on the complex and the carrier, so a supplier's “slightly soluble” statement is not a specification until the method and the lot are named. Moisture behaviour follows the same pattern. The picolinate is a crystalline solid with a tight LOD limit; the chloride hexahydrate is deliquescent and will pick up water from the air, so an open drum changes weight and flow. The polynicotinate may be blended on a carrier, and the carrier's moisture behaviour can dominate. Particle size is separate from all three: a 40 mesh picolinate and a fine chloride powder will not run the same on a capsule machine. ## What the dosage form asks for For a dry capsule or tablet, the picolinate is the straightforward choice when the label names picolinate: it is a stable solid, it blends with the usual excipients, and a 1% dilution gives a weighable amount. A granulated grade can improve flow without changing the label. The chloride is workable in a dry blend only if the blend and the pack keep water out; the same water affinity that makes it easy to dissolve makes it the less forgiving dry ingredient. For a powder stick or a drink mix, solubility pushes the other way. The chloride dissolves, but the solution is acidic and the powder picks up water; the picolinate disperses, which may be acceptable in a cloudy format and unacceptable in a clear one. Neither source removes the need to test the finished matrix at its real pH and water activity. At 1% dilution, a 200 µg chromium dose is about 163 mg of blend. That is a capsule-sized weight, and it shows why the carrier and the uniformity of the dilution matter more than the drum assay. A 0.1% dilution would need more than 1.6 g per dose, which is not a capsule. ## What changes when you switch Write the source into the specification before the assay. A line that says “chromium 12%” could describe a picolinate, a diluted chloride or a blend; a line that says “chromium picolinate, 12.2–12.4% Cr by ICP-OES, identified by IR and HPLC” describes one article. The same rule applies to the polynicotinate: name the complex, the niacin content if it is part of the label, and the carrier. When the source changes, these lines change with it: the ingredient name on the label; the chromium assay and the powder weight per dose; the solubility and the choice of dosage form; the moisture limit and the pack; the identity methods; the permitted-form check; and the stability protocol. A switch that updates only the purchase order leaves the label and the file describing the old material. Do not switch to a form that is not on the destination market's permitted list, even if the chromium figure is convenient. Do not switch a label that already names picolinate to chloride without changing the ingredient list and the source declaration. And do not use a polynicotinate as a drop-in picolinate: the complex, the carrier and the chromium content are different articles. The source comparison continues on the picolinate versus chloride page; the regulatory list is explained on the compliance page and in the Annex II note; the identity tests are on the identity page; the catalog specification sits on the chromium picolinate hub. ### 02.1 Chromium picolinate vs chromium chloride: chromium content, stability and the label URL: https://nutrition.rainwoodbio.com/products/minerals/chromium-picolinate/grades/chromium-picolinate-vs-chloride/ Reviewed: 2026-11-18 Chromium picolinate and chromium chloride hexahydrate deliver the same element from different compounds. The picolinate carries 12.2–12.4% chromium; the chloride hexahydrate carries about 19.5%, so a 200 µg chromium dose is about 1.63 mg of picolinate or 1.03 mg of chloride. The chloride is freely soluble and hygroscopic; the picolinate is sparingly soluble and stable dry. Both forms are on the EU permitted list, so the choice turns on the dosage form, the pack and the label rather than on the chromium number alone. In one lineThe same 200 µg of chromium is 1.63 mg of picolinate or 1.03 mg of chloride hexahydrate; the difference in the powder, not the dose, is what changes the formula. ## Two sources, line by line Chromium picolinate and chromium chloride hexahydrate compared | Parameter | Chromium picolinate | Chromium chloride hexahydrate | Formula | C18H12CrN3O6 | CrCl3·6H2O | CAS | 14639-25-9 | 10060-12-5 | Chromium content | 12.2–12.4% | About 19.5% | Powder for 200 µg Cr | About 1.63 mg | About 1.03 mg | Solubility in water | Sparingly soluble | Freely soluble | Moisture behaviour | Crystalline solid, LOD ≤0.5% | Hygroscopic, deliquescent | Solution behaviour | pH-sensitive complex | Acidic solution | EU permitted list | Chromium picolinate | Chromium(III) chloride | Label ingredient | Chromium picolinate | Chromium chloride or chromium(III) chloride The two rows that matter most are the chromium content and the moisture behaviour. The first sets the powder weight; the second sets the pack and the process. The label row is not a formality: the ingredient list has to name the source that the COA describes. ## The chromium conversion The conversion is simple arithmetic, and it is the first thing to put in a comparison. Divide the elemental chromium target by the chromium fraction of the source. At 12.3%, 200 µg ÷ 0.123 = 1,626 µg, or 1.63 mg. At 19.5%, 200 µg ÷ 0.195 = 1,026 µg, or 1.03 mg. A 1 mg chromium dose would need 8.13 mg of picolinate or 5.13 mg of chloride hexahydrate; both are still small weights for a capsule. Those weights explain the dilution. A formulator cannot weigh 1.63 mg into a capsule at production speed, so the picolinate can be supplied as a 1% dilution or blended from a premix. At 1%, a 200 µg dose is about 163 mg of blend. The chloride can be dissolved instead, which avoids the weighing problem but introduces water, pH and preservative questions. The assay behind the fraction is described in the ICP-OES method note. ## Dry stability and solution behaviour Dry, the picolinate is the easier material. It is a crystalline solid with a ≤0.5% loss-on-drying limit, and a sealed foil pouch or fiber drum keeps it dry. The chloride hexahydrate is hygroscopic and will pick up water from the air; an open drum changes weight, flow and the assay as sold, and the pack has to be moisture-tight. The chloride also gives an acidic solution, so a liquid formula needs a pH check and a stability study on the finished matrix. In solution, the comparison reverses. The chloride dissolves freely, while the picolinate is sparingly soluble and may need a dispersion or a dilution. The picolinate complex is also pH-sensitive: an acidic drink and an alkaline drink are different experiments. Neither source can be swapped into a formula on the strength of a dry-stability result alone. ## What the label has to say The label has to name the source, not just the element. In the EU, both forms are on the Annex II list, but they are separate entries: “chromium picolinate” and “chromium(III) chloride”. In the US, the ingredient list names the form used, and the Supplement Facts panel declares chromium as the element. A switch from picolinate to chloride therefore changes the ingredient list even when the chromium amount per serving stays the same. Three other label elements move with the source: the powder weight in the batch record (not usually on the label, but in the specification), the carrier or dilution statement if a premix is used, and the storage statement if the chloride's hygroscopicity requires a tighter pack. The claim wording is a separate check; this page does not propose one. The label should not describe the chloride as picolinate or the picolinate as chloride, and a generic “chromium” ingredient line is not a substitute for the source name. ## When to choose which Choose the picolinate for a dry capsule or tablet when the label names picolinate, the pack can keep moisture out, and the formula can carry a 1% dilution. Choose the chloride hexahydrate for an aqueous format where solubility is required and the pH, preservative and pack are under control; it is the more soluble source and the more demanding dry ingredient. Choose neither on the basis of the chromium percentage alone, because the percentage is the one line the two sources can be made to share. If the label needs chromium polynicotinate, this comparison does not apply; that is a different complex with a supplier-defined chromium content, and the grade page covers it. If the destination is the EU, check the Annex II entry for the exact form before the formula is fixed. ## What a switch changes A source switch changes six groups of things: the ingredient name, the chromium assay and the powder weight, the solubility and the dosage form, the moisture limit and the pack, the identity methods, and the stability protocol. It can also change the permitted-form check. A switch that updates the purchase order but not the label, the specification and the stability file leaves three documents describing the old material. The safest sequence is to fix the label and the market first, then choose the source that can meet both, then run the blend and stability work on that source. The chromium arithmetic is the easy part; the pack and the label are where the switch is won or lost. The broader source comparison is on the grade page; the moisture and blend questions are on the stability page; the EU listing is on the compliance page; the identity tests are on the identity page; the catalog specification sits on the chromium picolinate hub. ### 03 Chromium picolinate is stable dry; the low dose makes the blend the risk URL: https://nutrition.rainwoodbio.com/products/minerals/chromium-picolinate/stability/ Reviewed: 2026-11-18 Dry chromium picolinate is a stable crystalline solid: the catalog limits loss on drying to ≤0.5% and residue on ignition to ≤0.2%, and a sealed pack keeps the assay where it was released. The low dose changes the risk. When the material is supplied as a 1% or similar dilution, the carrier, the blend uniformity and the pack decide the shelf life more than the drum assay does. Moisture is the first variable to control; heat and light are the next. In one lineThe drum is stable dry; the blend is where the shelf life is won or lost, because at a 1% dilution the carrier is 99% of what sits in the capsule. ## The dry powder A crystalline solid with a tight moisture limit is a good starting point. Chromium picolinate is sparingly soluble in water and is normally handled as a dry powder; the ≤0.5% loss-on-drying limit leaves little room for surface water, and the ≤0.2% residue limit is a check on the inorganic content left after ignition. Sealed at room temperature and kept away from light, the powder is not expected to lose assay. The pack is part of the specification. A 1 kg foil pouch and a 25 kg fiber drum are the standard packs; once either is opened, the room enters. Humidity raises LOD, particles stick, flow changes and the colour can dull. A closing routine, a dry weighing area and a pack that is actually resealed matter more than a long shelf-life claim borrowed from another material. ## In solution In water the material is sparingly soluble, so a solution format is a separate development question rather than a matter of stirring harder. The complex is held together by chromium–ligand bonds that respond to pH; an acidic matrix and an alkaline matrix are not the same experiment. A clear drink also needs the material to stay in solution through the hold time, the fill and the shelf life, and a cloudy drink needs a dispersion that does not settle into a grit at the bottom. Heat adds a second variable. A wet matrix at a high process temperature is a different environment from a dry blend, and the finished product's pH, water activity and pack have to be tested together. A clear solution at the bench is not evidence of a stable solution in the bottle. ## What actually moves the result Stability factors · chromium picolinate and its dilutions | Factor | Effect | Control | Water | Higher LOD, caking, flow loss | Sealed liner, dry handling, reseal | Heat | Colour shift, moisture migration | Cooler process, controlled drying | Light | Colour fade | Opaque or amber pack, dark storage | pH in solution | Dissociation, haze, sediment | Buffer and trial the final matrix | Carrier in a dilution | Moisture and flow follow the carrier | Specify the carrier and its LOD | Pack | Moisture vapour ingress | Foil pouch, tight drum, sealed seam Light is a secondary factor for a dry solid, but the colour is the visible marker. A fade is a reason to retest, not proof that the assay moved. The same caution applies to a colour that deepens: the specification allows a range, and a photograph is not a result. ## The stability protocol Bracket the pack, not just the molecule. The bulk study keeps the powder in its commercial pack at 25 °C/60% RH and at 40 °C/75% RH, with pulls at the start and then at 3, 6, 12 and 24 months. Each pull tests chromium by ICP-OES, identity by IR and HPLC, LOD, residue, appearance, particle size and microbiology. The warm leg is a stress condition, not a storage instruction; it exists to make a trend visible inside the study window. A dilution needs its own study. At 1%, the carrier is 99% of the blend, so test the blend for chromium uniformity, carrier moisture, flow and segregation, not only for chromium content. A 1 kg pouch and a 25 kg drum can behave differently after opening; the study should cover the pack that will be sold. Retain a sample from each pull and keep the lot code with it. ## The formula decides the test Dosage formats · where the stability risk sits | Format | Main risk | What to test | Dry capsule or tablet | Moisture and excipient interaction | LOD, flow, assay, colour | Powder stick | Seal and moisture pickup | LOD, uniformity, seal integrity | Drink mix | pH, solubility, sediment | Assay, pH, appearance, hold time | Liquid | Hydrolysis and preservative | Assay, pH, appearance, micro A gummy or a chew is a wet, hot matrix and needs its own data; the dry powder's stability does not transfer to it. A stick pack depends on its seal, and a liquid depends on its preservative and its pH. The common mistake is to test the powder, pass the powder and ship the format. ## How shelf life is assigned Shelf life is a conclusion from stability data on the pack and the matrix, not a number attached to the chemical name. The catalog specification does not carry a shelf-life figure. The current retest or expiry period for the pack you are buying should come from the supplier's study and should name the storage condition. A bulk pack that will be re-tested before use can carry a retest period; a consumer pack needs a date the shopper can read. The COA releases a lot; it does not predict a shelf life. If the pack or the dilution has not been studied, the defensible answer is a shorter period or a new study, not a figure borrowed from another product. The storage statement on the label should match the condition the study used. The parameters followed over time are listed on the COA page. The packs a study has to cover are described on the ordering page; the quality page explains how the data are held, and the chromium picolinate hub carries the specification. The moisture test itself is defined in the loss-on-drying note. ### 04 Chromium picolinate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/chromium-picolinate/moq/ Reviewed: 2026-11-18 The minimum order for chromium picolinate is 1 kg, packed as a 1 kg foil pouch; the standard larger pack is a 25 kg fiber drum, and the catalog lead time is 1–7 days. One kilogram is not a dose-count minimum. At 12.2–12.4% chromium it contains about 122–124 g of elemental chromium, which is more than 600,000 doses at 200 µg. It is the smallest unit that can be drawn from a released lot, shipped with its own COA and used for qualification. In one lineOne kilogram is a qualification unit, not a production batch: it carries the lot identity, the COA and enough material to run the blend and stability trials before the drum is ordered. ## Why the minimum is 1 kg The arithmetic explains why the minimum is not driven by the number of doses. One kilogram at 12.3% chromium contains 123 g of chromium, or 123,000 mg. At 200 µg per dose that is 615,000 doses; at 100 µg it is 1.23 million. Even a 1% dilution of one kilogram contains 10 g of picolinate, about 1.23 g of chromium and roughly 6,150 doses at 200 µg. What one kilogram does buy is a released lot with a lot code, a COA, a retained sample and enough material for identity checks, a blend trial and the first stability pull. For a low-dose ingredient, that is the useful unit. A larger drum is a production decision; the pouch is the qualification decision. ## Packs and what they are for Standard packs · chromium picolinate | Pack | Net content | Typical use | What to confirm | 1 kg foil pouch | 1 kg | Qualification, small batches | Seal, lot code, COA | 25 kg fiber drum | 25 kg | Production | Inner liner, lot code, COA | 1% dilution | Net weight as agreed | Low-dose blending | Carrier, dilution ratio, blend assay | Granulated grade | Net weight as agreed | Flow-sensitive lines | Granulation, particle size The pack is the net weight of the material as sold. A dilution is its own article: the carrier, the ratio and the chromium assay of the blend belong on its COA, not only the assay of the parent picolinate. The same applies to a granulated grade, where the particle size and flow are part of what was ordered. ## Lead time The catalog lead time is 1–7 days. That window covers material from a released lot; a custom dilution, a granulated grade or a document that has to be issued for a new market can add time. Destination and transport are separate from production, and the quotation should state which part of the timeline is which. If the order is for a first launch, ask for the lot's release date and the current retest period at the same time as the lead time. A short lead time on a lot that is close to its retest date is not the same offer as a short lead time on a fresh lot. ## What a quotation needs Six details that change a chromium picolinate quotation | Detail | Why it changes the quotation | Product and source | Picolinate, a dilution or a granulated grade | Chromium assay | 12.2–12.4% or a diluted assay with a named carrier | Quantity and pack | 1 kg pouch, 25 kg drum or an agreed net weight | Destination and delivery term | Port, Incoterm, documents and any label work | Document set | COA, SDS, specification, allergen and identity records | Timing and sample | First order, repeat order, trial date and tests A quotation that omits the source, the assay and the pack is a number without an article. The six lines above are the minimum needed to compare two offers, and they are also the minimum needed to write the purchase order so that the lot arrives as specified. ## Samples and qualification A sample should come from a released lot and carry the same lot code as the COA. Say what you will test: chromium by ICP-OES, IR and HPLC identity, LOD, particle size, and a blend trial at your intended dilution. If the sample is a subsample from a pouch, ask how it was taken and whether the remainder was retained. The 1 kg pouch is the smallest standard pack; a documented subsample can be agreed for a laboratory check. The point of either is the same: the material you test should be traceable to the certificate you file. ## Terms to settle before the order Terms are confirmed on the quotation: delivery term, payment term, documents, pack and the retest period. Two clauses deserve a line of their own. First, the specification that governs the lot should be attached to the order, not left in an email. Second, the label and the ingredient name should be agreed before the material is packed; a change after packing is a new lot or a new label, not a note on the invoice. For a repeat order, quote the lot code and the specification revision. That is how a second drum is compared with the first without reopening the whole qualification file. The certificate lines that travel with the pack are described on the COA page; the storage and pack questions are on the stability page; the release workflow is on the quality page; the catalog specification sits on the chromium picolinate hub. ### 05 Where chromium picolinate is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/minerals/chromium-picolinate/compliance/ Reviewed: 2026-11-18 Chromium picolinate is a permitted chromium source for food supplements in the EU and the UK, and it is sold in the US as a dietary ingredient; the permission is form-specific, so the label must name the picolinate and the file must show the chromium assay, the contaminant results and the market's label wording. Four checks decide the file: the form is on the list, the contaminants sit under the ceiling, the label names the source, and the claim matches the market. The catalog limits are Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg. In one linePermission, contaminant ceiling, label wording and claim are four separate checks; a permitted form does not make a label or a claim compliant by itself. ## The four checks Four questions are often conflated. Is the exact form on the destination market's permitted list? Which contaminant ceiling applies to the finished supplement? Does the label name the source and declare chromium in the required way? And is the statement on the pack an authorised claim, a structure/function statement, or something that cannot be made? The answers do not travel together. A form listed in the EU is not automatically in the US file, a finished-product ceiling is not a raw-material specification, and a sentence allowed in one market can be a disease claim in another. The current legal text decides. ## European Union In the EU, chromium picolinate appears in Annex II to Directive 2002/46/EC, as amended by Commission Regulation (EC) No 1170/2009. The listing is form-specific: “chromium picolinate” is the entry, and a generic chromium salt is a different entry. The reference intake for labelling is 40 µg/day under Regulation (EU) No 1169/2011; that is a labelling reference, not a maximum. Member States can set their own maximum levels for chromium in food supplements, so the destination matters. Labelling follows Directive 2002/46/EC and Regulation (EU) No 1169/2011: the pack is presented as a food supplement, the recommended daily portion and the warning not to exceed it are stated, the varied-diet statement is present, and the pack is kept out of reach of young children. Claims fall under Regulation (EC) No 1924/2006 and the authorised list in Regulation (EU) No 432/2012; only the authorised wording, with its conditions, can be used. ## United States In the US, chromium picolinate is sold as a dietary ingredient with a pre-DSHEA marketing history. The brand should still be able to point to the basis for its own ingredient and supplier, because the history of the article and the identity of the lot are different questions. On the Supplement Facts panel, chromium is declared as the element; the Daily Value for adults and children four and older is 35 µg under 21 CFR 101.9. The picolinate belongs in the ingredient list. Manufacturing follows the dietary supplement cGMP in 21 CFR 111. A structure/function statement is written and substantiated by the brand, carries the DSHEA disclaimer, and is notified to FDA within 30 days of marketing; a disease claim is outside the framework. Federal law sets no general heavy-metal ceiling for supplements, so Proposition 65 and voluntary standards such as USP <2232> often decide what the brand tests. ## United Kingdom The UK applies a retained version of the EU permitted-forms list. As of this review, chromium picolinate remains on the GB list; the GB nutrition and health claims register, not the EU register, governs the wording, and the labelling rules are the UK versions of the food supplement requirements. Northern Ireland continues to apply the EU regime under the Windsor Framework, so a UK launch can be two files rather than one. The UK reference intake is 40 µg/day, matching the EU NRV. The permitted-forms list and the claims register can diverge from the EU; read the current GB text before the label is approved, and do not assume an EU-authorised sentence is on the GB register. ## The contaminant table Contaminant limits · catalog specification and market ceilings | Contaminant | Catalog limit | EU food supplement ceiling | US federal | UK | Lead | ≤3 mg/kg | 3.0 mg/kg | No general limit | 3.0 mg/kg | Arsenic | ≤2 mg/kg | No harmonised limit | No general limit | No harmonised limit | Cadmium | ≤1 mg/kg | 1.0 mg/kg (3.0 for seaweed or bivalve-based) | No general limit | 1.0 mg/kg | Mercury | ≤0.1 mg/kg | 0.10 mg/kg | No general limit | 0.10 mg/kg The EU and UK columns are written for the supplement as sold; the catalog column is the raw-material specification. They are not interchangeable. The EU ceilings come from Regulation (EU) 2023/915. The arsenic line is the clearest example: the catalog limit of 2 mg/kg is a customer specification because there is no general EU maximum for arsenic in food supplements. Member States can set their own. ## Claims and label wording No disease-related claim belongs on a chromium picolinate pack. In the EU, a claim must be on the authorised list and must match its conditions; in the US, a structure/function statement must be truthful, substantiated and disclaimed, and a disease claim is not permitted. A statement about the form itself — for example, that the lot is the picolinate — is an identity statement, not a health claim, and it still has to be true on the COA. Do not use the ingredient name to go beyond the authorised wording, and do not let a certification mark stand in for the substantiation. The label sentence belongs to the brand; the evidence belongs in the brand's file. ## The document pack Documents a brand should hold for a chromium picolinate lot | Document | What it proves | Who issues it | Specification | The agreed article and limits | Buyer and supplier | Lot COA | The results for this lot | Manufacturer | SDS | Handling and hazard information | Manufacturer | Allergen statement | Whether a declarable allergen is present | Manufacturer | Identity records | IR and HPLC results for the lot | Manufacturer or laboratory | Contaminant results | Heavy metals and microbiology | Manufacturer or laboratory | Packaging declaration | Food-contact suitability of the pack | Pack supplier | Label artwork | Source name, chromium amount and warnings | Brand Every document should carry the lot code or point to it. A generic TDS and a lot-specific COA are not a matched pair unless the article, the grade and the pack agree. ## What to check before the first order Market file checklist · chromium picolinate | Check | Evidence | Red flag | Form on the list | Annex II or GB list entry for the exact source | “Chromium” with no source | Contaminants | COA results against the destination ceiling at the daily dose | A raw-material ceiling pasted onto the finished product | Label source | Ingredient list names chromium picolinate | “Chromium” or a different salt | Chromium amount | µg and % NRV or % DV | A powder weight presented as the chromium amount | Claims | Authorised wording or a disclaimed structure/function statement | A disease claim | Documents | Lot code on COA, SDS, spec and label | Generic documents with no lot link | Change control | New label and specification for a new source | A purchase-order switch with no label change The EU, US and UK notes expand each market; the COA page shows the file's results; the identity page covers the form tests; the chromium picolinate hub carries the specification. ### 06 How we prove a chromium picolinate lot is the picolinate URL: https://nutrition.rainwoodbio.com/products/minerals/chromium-picolinate/identity/ Reviewed: 2026-11-18 A chromium picolinate lot is the picolinate when four things agree: the chromium assay sits at 12.2–12.4% by ICP-OES, the IR spectrum matches the reference, the HPLC picolinate result belongs to the same lot, and the material is the trivalent picolinate complex, not a generic chromium salt or a dye-matched dilution. The chromium figure alone proves the metal; it does not prove the ligand. The picolinate identity is the part a generic chromium supplier cannot answer. In one lineThe chromium assay proves the metal; IR and HPLC prove the picolinate, and the trivalent state rules out the hexavalent form; a dye or a chromium salt can match the colour without matching the identity. ## The four layers Identity layers · what each one proves | Layer | Question | Evidence | Article | Is the powder the named complex? | Specification, CAS, appearance, supplier file | Metal | How much chromium is present? | ICP-OES, 12.2–12.4% | Ligand | Is the picolinate present? | IR spectrum, HPLC picolinic acid | State and disclosure | Is the chromium trivalent, and is anything else in the drum? | Cr(VI) screen where required; carrier and dilution statement Each layer answers a different question. A laboratory result can close one and leave the others open, which is why a single chromium percentage is not an identity file. The article layer is the paperwork; the other three are the measurements that test the paperwork. The trivalent state is not proved by the chromium assay; it is declared by the article and, where required, tested by a Cr(VI) screen. That is why the screen belongs on the specification as its own line. ## Chromium, picolinate and the 3:1 ratio The pure complex has one chromium atom and three picolinate ligands. Its formula weight is 418.31 and its chromium fraction is 12.43%, so the catalog window of 12.2–12.4% is a narrow band around the theoretical figure. If the only chromium source is the complex, that window corresponds to roughly 98.2–99.8% of the theoretical chromium content. The stoichiometry is a second, independent check. Convert the chromium result and the picolinic acid result to moles and the ratio should land near 3:1. If the chromium is on target and the ligand is low, suspect a second chromium source. If both are low, suspect a dilution or a carrier. If the ligand is high relative to the chromium, suspect unreacted picolinic acid. The ratio is arithmetic from two results, so both results need the same basis and both need to belong to the same lot. The certificate in this catalog reports identification by IR and HPLC rather than a numeric ligand assay. That is enough to confirm identity; it is not a replacement for the chromium figure. Ask for the HPLC basis if you need to calculate the ratio. ## IR, HPLC and why XRD is not the identity test IR is the primary ligand test. The spectrum of the complex has bands from the pyridine ring and the carboxylate, and the comparison is against a reference spectrum of chromium picolinate; a chromium chloride, a chromium oxide or a simple blend does not give the same spectrum. HPLC looks at the picolinate from the other side: it can measure free picolinic acid, or total picolinic acid after the complex is released, and the certificate should say which basis was used. X-ray diffraction is not the identity test here. It can show that the powder is crystalline and can detect a crystalline second phase, but it does not name the ligand; a crystalline chromium salt can produce a pattern too. Use XRD as a crystallinity or polymorph check, not as the proof of picolinate. The direct proof is the IR spectrum plus the HPLC result on the same lot. ## The adulteration routes Substitution routes · what they look like and what catches them | Route | What it looks like | What catches it | Chromium chloride or another Cr salt | Chromium assay passes; colour may be pale | IR and HPLC; chloride or anion check | Dilution with a carrier | Chromium below the window; more powder per dose | Chromium assay, LOD, residue, carrier declaration | Dye to match the purple-red colour | Colour looks right; chromium may be low | IR, HPLC, dye screen, assay | Unreacted picolinic acid | Ligand high; chromium low | Ratio, HPLC basis, chromium assay | Picolinate blended with a chromium salt | Chromium on target; ligand low | Ratio, IR, HPLC | Polynicotinate sold as picolinate | Different ligand; chromium often lower | IR, HPLC, label and specification The dye route is the one that colour alone cannot catch. A pale chromium salt can be tinted to the expected purple-red, and the eye will accept it. The IR spectrum and the HPLC result are the tests that do not depend on appearance. The dilution route is the reverse: the colour may be weak because the powder is 1% picolinate, but if the carrier and the assay are declared, that is a legitimate article rather than a substitution. ## What to write into the specification Write the identity into the specification as a set of lines, not a single word. Name the article: “chromium picolinate (chromium(III) tris(picolinate)), CAS 14639-25-9”. Set the chromium window at 12.2–12.4% by ICP-OES. Require IR and HPLC identification on the lot. Keep LOD ≤0.5%, residue on ignition ≤0.2%, particle size ≥95% through 40 mesh, the heavy-metal panel and the microbiological limits. If a Cr(VI) screen is required, write it as a separate line with its detection limit. If the material is a dilution, add the carrier, the ratio and the chromium assay of the blend. The clause that is often missing is the one about a second chromium source. A specification that names picolinate but allows “chromium” from any source can be satisfied by a blend. Add: “no chromium source other than chromium picolinate; no added dye or colour.” That sentence is easy to test and hard to misinterpret. ## What to ask the supplier - What is the chromium result for this lot, by which method, and what is the release window? - Can you provide the IR spectrum and the HPLC picolinic acid result for this lot, with the HPLC basis stated? - Is the lot the complex, or a blend of picolinate with another chromium source or a carrier? - What is the Cr(VI) result, and what detection limit does the method report? - If the material is diluted, what is the carrier, the ratio and the chromium assay of the blend? Five answers, all tied to one lot code, are an identity file. A chromium percentage on its own is not. The COA page shows where these lines sit on the certificate; the grade page compares the sources; the chromium picolinate hub carries the specification; the FTIR note and the HPLC note describe the methods. ### 01 What the COA for ferrous gluconate actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/ferrous-gluconate/coa/ Reviewed: 2026-11-18 The certificate for a ferrous gluconate lot reports appearance, iron by cerimetric titration on the dried basis, the loss on drying that the basis depends on, pH, particle size, the heavy-metal panel and microbiology. Each row should show the test, the method and the limit the lot was released against. The ranges here are the catalog specification; the batch COA is the document that confirms a particular pouch or drum. In one lineA ferrous gluconate certificate is only auditable when the iron figure, its drying basis and the moisture result sit on the same page. ## The certificate as a test report A certificate is auditable when every line can be repeated. That needs three things per row: what was measured, which method produced the number, and which limit the lot was released against. The header should name the hydrate, the lot code, the standard and the pack size. Identity, assay and moisture · ferrous gluconate dihydrate | Parameter | Method | Release limit | Appearance | Visual | Greyish-yellow to greenish-yellow powder | Identification | Ferrous reaction and infrared spectrum | Conforms to reference | Iron (Fe), dried basis | Cerimetric titration | 11.8–12.5% | Loss on drying | Gravimetric | ≤8.0% | pH (5% solution) | Potentiometry | 3.0–5.0 | Particle size | Sieve analysis | ≥95% through 80 mesh A certificate that reports iron but not moisture has left the basis undefined; one that reports contaminants without detection limits cannot be compared with another laboratory's result. Contaminant and microbiological limits · ferrous gluconate | Parameter | Method | Release limit | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent Appearance is the only line a reader can check without an instrument, and the first that moves when a lot oxidises; it belongs on the sheet even though it is not a number. ## What the dried basis is doing The iron line says “dried basis”, and that phrase is arithmetic. Ferrous gluconate dihydrate is C₁₂H₂₂FeO₁₄·2H₂O at 482.17 g/mol; iron is 11.58% of the dihydrate as sold. Drive off the two water molecules — 7.47% of the mass — and the same iron is 12.52% of what remains. The 11.8–12.5% window and the ≤8.0% loss-on-drying limit describe the same solid from two directions. The conversion is one line: iron on the dried basis equals iron as-is divided by one minus the loss on drying. If a powder reads 11.4% as-is with 7.0% loss, the dried figure is 12.3%; at 2.0% loss the same arithmetic gives 11.6% and fails. Neither is a batch result — both show why the basis must be printed. Comparisons fail here more often than anywhere else on the sheet. An as-is result of 11.3% against a dried-basis limit of 11.8% looks like a failure and may be a pass; a dried result of 12.4% against an as-is expectation may be the same powder. Loss on drying is not a purity figure. Crystal water and surface water are both water, and the 8.0% limit allows for the hydrate plus handling moisture. ## Release limit versus batch result The release limit is the gate; the batch result is the measurement. Both belong in the row, with the method beside them. A result column filled with the specification range is a copy of the gate, not a result. Identity lines are the exception: the ferrous reaction and the infrared spectrum are comparisons, so “conforms” is a legitimate result if the certificate names the reference and edition. A conformity without a reference is a stamp, not a test. Contaminant lines need detection limits. “Pb: <3 mg/kg” says the method could not see below 3; “Pb: 0.4 mg/kg” says the lot was measured. The catalog limits sit at the European food-supplement maximum levels for lead, cadmium and mercury, leaving no headroom for a second contributor. The ferric figure is the line the certificate usually does not carry. Cerimetry counts ferrous iron only, so a lot that starts near the top of the window can oxidise and stay inside it while the declared ferrous salt is no longer fully there. Ask for total iron by ICP-OES beside the cerimetric result and read the difference, as the identity page sets out. ## What moves between batches Iron moves with the reaction, the crystallisation and the drying step. Over-drying removes water and lifts the dried-basis figure; under-drying leaves water and lowers the as-is figure. On a dried basis, the loss-on-drying line explains a drift in the assay. pH follows washing and residual gluconic acid. The acid end of 3.0–5.0 is normal; a shift towards 5.0 can mean less acid in the liquor or partial hydrolysis, and it changes behaviour beside alkaline excipients. Colour is the least quantitative line and often the earliest. Greyish-yellow to greenish-yellow is the catalog description; a yellow-brown or reddish cast points to ferric iron. The assay can still pass. Colour is a prompt to pull the batch record, not a rejection on its own. Mesh moves with milling and sieving. A lot at the coarse end of “≥95% through 80 mesh” flows differently in a capsule machine from one that is almost all through, and the certificate's single percentage hides that spread. ## When to send a lot to a second laboratory Order an independent test for a new source, a first shipment into a regulated market, a label that names the ferrous salt, or a disputed result. The useful panel closes the gaps the certificate leaves. For this salt the gap is the oxidation state. Ask for cerimetric ferrous iron and total iron by ICP-OES on the same sample, both on the same basis; the difference is ferric iron. Add infrared identity against a reference, X-ray diffraction if the crystalline form is in question, and an ICP-MS panel for lead, arsenic, cadmium and mercury. Ask the laboratory to state its detection limit and basis for every line, and send the retained sample, the supplier's certificate and your specification together. A referee result without the sample's lot code proves nothing about the drum in your warehouse. ## What to compare between suppliers Six lines to compare between two ferrous gluconate certificates | Line | What to ask | Why it matters | Form and hydrate | Dihydrate named, CAS on the sheet | The hydrate sets the iron arithmetic | Iron | Result, basis and method | As-is and dried-basis figures are not comparable | Loss on drying | Result and conditions | Defines the basis and predicts caking | Ferric iron | Total iron minus ferrous iron | The cerimetric assay sees only Fe(II) | Particle size | Mesh and percentage passing | Fill weight, flow and dust | Traceability | Lot code on certificate, pack and retained sample | An accurate certificate can cover another drum Compare the six lines, not the two iron figures. A result on an unnamed basis and a result on a dried basis are not the same statement. The catalog specification sits on the product page; the grade comparison covers the salt choice; the quality page shows the release file; and the ICP-MS note explains the total-iron figure behind the ferric check. ### 02 Ferrous gluconate, fumarate or bisglycinate: choosing an iron salt URL: https://nutrition.rainwoodbio.com/products/minerals/ferrous-gluconate/grades/ Reviewed: 2026-11-18 Ferrous gluconate, ferrous fumarate and ferrous bisglycinate are three different iron sources, not three grades of one powder. They differ in elemental iron, molar mass, solubility, colour and the way the ferrous state behaves in a blend. The choice sets the fill weight and the ingredient name on the label before it sets anything else. In one lineThe salt chooses the mass per dose, the oxidation risk and the ingredient name on the label; the iron percentage is only the first number. ## The salt is the specification A grade is a variation on one material: a mesh, a granulation, a hydrate. A salt is a different molecule. Ferrous gluconate dihydrate carries 11.8–12.5% iron; ferrous fumarate about 33%; ferrous bisglycinate about 20–23% in the commercial grades. The label names the salt, and the elemental iron figure is the arithmetic that follows from it. The ferrous state is common to all three, and it is not a detail. The label and the specification both name Fe(II), and an oxidised lot is a different material from the one that was ordered. Ferric pyrophosphate is not a stronger version of the same thing; it is a ferric salt with its own identity, its own assay and its own entry on an ingredient list. The purchase order should name the salt, the hydrate and the mesh. “Iron 12%” describes an assay result, not a material, and two suppliers can meet it with different powders. ## Six iron sources side by side Iron sources · elemental iron and what each choice changes | Source | Iron form | Elemental Fe | In water | What it changes | Ferrous gluconate dihydrate | Fe(II) salt | 11.8–12.5% | Soluble | Mass per dose; acidic solution | Ferrous fumarate | Fe(II) salt | About 32.9% | Practically insoluble | Much smaller mass; suspension | Ferrous sulfate heptahydrate | Fe(II) salt | About 20.1% | Very soluble | Acidic, hygroscopic, strong taste | Ferrous bisglycinate | Fe(II) chelate | About 20–23% | Soluble | Chelate identity; lower mass | Ferric pyrophosphate | Fe(III) salt | 24–26% | Insoluble | Ferric state; low reactivity in blends | Carbonyl iron | Elemental Fe | ≥97% | Insoluble | Very small mass; density and dispersion These are typical figures, and the supplier's certificate is the figure that counts. The ferrous sulfate row is the heptahydrate; the dried grade is about 32% and is a different specification. Carbonyl iron is elemental, not a salt, so its density and dispersion matter more than its solubility. ## 80 mesh is a number before it is a grade The catalog grade is a powder with at least 95% passing an 80 mesh sieve, whose aperture is about 177 µm. The remaining 5% is a coarse tail, and a lot that sits at 95.1% is a different powder to handle from one at 99.9%, even though both pass the same line. Flow, dust and blend uniformity follow that tail more than they follow the headline. The powder dissolves in water with gentle warming, and the solution is acidic: pH 3.0–5.0 at 5%. Solubility is why the salt suits sticks and drink mixes, and the acid pH is why it can react with alkaline components in the same blend. Granulated and 100 mesh versions are available on request; both are process variants, not different chemistry, and neither changes the iron figure. Colour is part of the specification for a reason. Greyish-yellow to greenish-yellow is the catalog description; a darker, browner or reddish powder points to ferric iron, and the iron assay may still pass. Moisture makes it worse: the powder picks up water, cakes, and the surface layer oxidises first. ## What the salt does to the fill The label claim is elemental iron; the formula weighs the salt. At the catalog midpoint, 1 mg of iron needs about 8.3 mg of ferrous gluconate, about 4.8 mg of ferrous bisglycinate at 21%, and about 3.0 mg of ferrous fumarate. Salt needed for a label claim · calculated at the stated iron percentages | Iron claim | Gluconate 11.8–12.5% | Bisglycinate 20–23% | Fumarate 32.9% | 14 mg | 112–119 mg | 61–70 mg | 43 mg | 18 mg | 144–153 mg | 78–90 mg | 55 mg | 20 mg | 160–169 mg | 87–100 mg | 61 mg A 500 mg capsule filled with gluconate delivers about 59–63 mg of iron, so a 100 mg claim needs two capsules or a larger fill; the same claim fits in about 435–500 mg of bisglycinate or about 304 mg of fumarate. Those are arithmetic, not fill-weight guarantees — the press trial and the certificate decide the final figure. Tablets add compression to the question. The gluconate is soluble and compressible with a binder and a lubricant, and granulation is the usual route when the fine powder will not run; the granulating aid then has to be declared. In a stick or a drink mix, the salt's colour and acidity show through, so the flavour and the packaging have to carry both. ## How to write the specification - “Ferrous gluconate dihydrate, C₁₂H₂₂FeO₁₄·2H₂O, CAS 299-29-6.” - “Iron 11.8–12.5% on the dried basis by cerimetric titration.” - “Identification: ferrous reaction and infrared spectrum, conforms to reference.” - “Loss on drying ≤8.0%; pH (5% solution) 3.0–5.0.” - “≥95% through 80 mesh; granulated or 100 mesh on request.” - “Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg; micro as the catalog.” - “No added ferric salt, iron oxide or diluent.” If the salt changes, all seven lines change, and so does the label. A formulation qualified on gluconate cannot be switched to fumarate by adjusting the fill weight alone: the ingredient name, the identity test, the assay method and often the capsule size move with it. ## When gluconate is the wrong salt It is the wrong choice when the claim has to fit a small capsule and the mass will not: the 12% iron fraction is the lowest of the common ferrous salts. It is the wrong choice for a clear beverage where a yellow-brown shift would be visible, and for a matrix built on alkaline actives that will push the pH up and precipitate the ferrous ion. It is also the wrong choice when the label is required to name a chelate, because the gluconate is a salt and no wording makes it one. In those cases the answer is another specification, not a workaround. Ferric pyrophosphate offers a ferric state and low solubility; carbonyl iron offers a very high iron fraction and a dense particle; ferrous bisglycinate offers a chelate with a lower mass per dose. The gluconate versus bisglycinate page takes the two-salt comparison further. The catalog line is on the ferrous gluconate product page. The COA page shows the assay and moisture lines, the stability page covers oxidation in storage and in the blend, and the elemental assay note explains why the iron figure is not a purity percentage. ### 02.1 Ferrous gluconate vs ferrous bisglycinate: iron content, oxidation and the label URL: https://nutrition.rainwoodbio.com/products/minerals/ferrous-gluconate/grades/ferrous-gluconate-vs-bisglycinate/ Reviewed: 2026-11-18 Ferrous gluconate and ferrous bisglycinate are both ferrous iron sources, but they are different molecules with different iron fractions. The gluconate dihydrate carries 11.8–12.5% iron; the bisglycinate carries about 20–23% in the commercial grades. Switching changes the mass per dose, the oxidation behaviour in the blend and the ingredient name on the label. In one lineGluconate carries about 12% iron and bisglycinate about 20%, so switching changes the fill weight, the oxidation story and the ingredient line. ## A salt and a chelate Ferrous gluconate is the iron(II) salt of gluconic acid: one ferrous ion and two gluconate anions, C₁₂H₂₂FeO₁₄·2H₂O, at 482.17 g/mol for the dihydrate. Ferrous bisglycinate is a chelate: one ferrous ion held by two glycine molecules through a nitrogen and an oxygen each, C₄H₈FeN₂O₄ at 203.96 g/mol for the anhydrous form. Both are Fe(II), both are powders, and both are described as iron sources — but the ligand, the mass and the solution chemistry differ. The word “chelate” describes the ring structure, not a grade or a strength. The gluconate is not a chelate, and no wording turns it into one. Conversely, the bisglycinate is not a gluconate with more iron; it is a different molecule with its own identity tests and its own regulatory entry. Commercial bisglycinate lands at about 20–23% iron rather than the 27.4% of the anhydrous formula, because the commercial solid is a hydrate and the grade is specified on that basis. That is normal, and the supplier's certificate is the figure that counts. The gluconate's 11.8–12.5% is a dried-basis range on the dihydrate, as the COA page explains. ## The iron arithmetic Salt mass for a 20 mg iron claim, and iron in a 500 mg fill | Source | Elemental Fe | Salt for 20 mg Fe | Fe in a 500 mg fill | Ferrous gluconate dihydrate | 11.8–12.5% | 160–169 mg | 59–63 mg | Ferrous bisglycinate | 20–23% | 87–100 mg | 100–115 mg | Ferrous fumarate | 32.9% | 61 mg | 164 mg A 20 mg claim takes roughly 165 mg of gluconate or 95 mg of bisglycinate; a 100 mg claim takes about 800–847 mg of gluconate but about 435–500 mg of bisglycinate. At a fixed capsule fill, the gluconate delivers less iron per milligram of powder, so the same claim needs more mass or more capsules. At a fixed claim, the bisglycinate leaves more room for other actives. The label declares iron, not the salt, so the salt mass is an internal number. It still decides the capsule size, the number of capsules and the space left for the rest of the formula. The grade page sets out the other salts in the same arithmetic. ## Oxidation is a property of both Both materials are ferrous, and both oxidise to ferric when moisture, heat and oxygen reach them. The difference is rate and visibility. The chelate holds the ferrous ion in a ring, which slows the reaction in a moist blend; it does not stop it, and commercial bisglycinate specifications commonly carry a ferric limit for that reason. The gluconate has no such ring: dissolved ferrous iron is free to react, and the cerimetric assay is the control. Colour behaves differently. Ferrous gluconate moves from greyish-yellow to yellow-brown as it oxidises; ferrous bisglycinate is darker to begin with, grey-green to brown, so a colour shift is harder to read. Neither powder is stable in an open pack, and neither can be judged by appearance alone. The stability page covers the storage and matrix variables. ## What changes in the blend The gluconate solution is acidic, at pH 3.0–5.0 for a 5% solution; the chelate is not, so the two behave differently beside acid- or alkali-sensitive actives. Alkaline excipients can raise the pH around a gluconate particle and precipitate ferrous iron; the chelate keeps the iron in solution over a wider pH range, though it too has limits. Neither behaviour is a claim about the finished product; both are reasons to test the blend rather than the salt alone. Iron is an oxidation catalyst in either form, so a blend containing fats or sensitive vitamins has to be followed for its own colour and assay, not only for iron. The gluconate adds acidity and a pale colour to a stick or drink mix; the chelate adds a darker colour and a different taste profile. The flavour and the packaging have to carry whichever one is used. ## The regulatory entries differ In the EU both forms appear in Annex II to Directive 2002/46/EC: ferrous gluconate and ferrous bisglycinate are separate entries, and the label must name the one that was used. In GB the retained list carries both. In the US, ferrous gluconate is affirmed as GRAS for use as a nutrient supplement under 21 CFR 184.1308, with the Food Chemicals Codex specification; ferrous bisglycinate does not have that paragraph, and its basis sits in the supplier's regulatory file. In every market the label declares iron in milligrams, not the salt, and the ingredient list names the source. The compliance page sets out the limits and documents. ## When to choose which Choose the gluconate when the label names ferrous gluconate, when the fill can carry 160–170 mg of powder for a 20 mg claim, and when an acidic, soluble salt suits the matrix. Choose the bisglycinate when the label names the chelate, when the fill is tight, or when the formula needs the iron held in a ring rather than free in solution. Choose neither when the matrix needs a ferric or elemental source: ferric pyrophosphate and carbonyl iron are different tools for different jobs. The decision is not which molecule is better in general. It is which molecule the label, the fill and the matrix can carry, at the iron figure the claim requires. A change of salt is a change of specification, identity test, label and often capsule size — not a substitution of one powder for another at the same weight. The catalog line is on the ferrous gluconate product page; the identity page shows how the ferrous salt is proved; the iron pyrophosphate page covers the ferric alternative; and the chelate glossary entry explains the ring that separates the two. ### 03 Ferrous iron oxidises; the pack and the matrix decide the shelf life URL: https://nutrition.rainwoodbio.com/products/minerals/ferrous-gluconate/stability/ Reviewed: 2026-11-18 Ferrous gluconate is stable as a dry solid in a sealed pack and reactive once it is wet, warm or exposed to air. The ferrous ion oxidises to ferric, the colour moves from greenish-yellow to yellow-brown, and the cerimetric assay falls while total iron stays the same. The pack and the matrix decide how fast that happens. In one lineFerrous gluconate keeps in a sealed pack and fails from moisture, heat and a matrix that lets the iron oxidise. ## The solid is stable, not inert The dihydrate carries two molecules of water in the crystal and can pick up more on the surface. Loss on drying has a limit of 8.0% for exactly that reason: the crystal water is part of the material, and the surface water is the part that moves. A powder that gains moisture cakes, and the surface layer that meets the air oxidises first. Temperature matters less in the dry state than moisture does, but it is not neutral. A warm store drives water to the surface and away from it again as the temperature cycles, and each cycle leaves the powder a little less uniform. The foil pouch is the moisture barrier; the fibre drum protects the pouch. Once a pouch is opened, the in-use period is shorter than the sealed shelf life. Particle size sets the surface area. A milled 100 mesh powder has more surface per gram than an 80 mesh powder, so it picks up moisture and oxidises a little faster for the same pack. That is a reason to keep the mesh in the specification, not a reason to prefer one mesh over the other. ## In solution the clock runs faster The salt dissolves in water with gentle warming, and the solution is acidic at pH 3.0–5.0 for a 5% solution. Dissolved ferrous iron reacts with oxygen; the rate rises with temperature, with pH, with light and with traces of copper or manganese. As the pH rises, ferrous hydrolysis and ferric precipitation become more likely, and the iron leaves the solution instead of staying in it. Ascorbic acid is the usual companion in a liquid or a stick. It can hold iron in the ferrous state, but it is consumed in the process, and iron can also catalyse its oxidation. The net effect is a formulation question to be measured, not a rule that a little ascorbic acid solves. Colour is the visible endpoint. A fresh solution is pale greenish-yellow; a yellow-brown or tea-coloured solution has ferric iron in it. The colour change is a signal, not a quantification — the cerimetric assay is the number, and the total-iron figure is the check that nothing was lost or added. ## What drives the reaction Factors that move ferrous gluconate towards ferric iron | Factor | Effect | Control | Moisture | Makes the surface reactive and causes caking | Foil pouch, sealed drum, dry room | Temperature | Raises the rate of oxidation and of moisture migration | Cool store, no hot spots | Oxygen | The oxidant itself | Sealed pack, low headspace | pH | Above the acidic range, ferrous iron hydrolyses | Keep the solution acidic; avoid alkaline excipients | Light | Accelerates oxidation in solution | Opaque or amber packaging | Trace metals | Copper and manganese catalyse the reaction | Specify the contaminant panel; avoid metal contact | Matrix | Water activity, pH and oxidising actives | Test the blend, not only the salt These causes act together. Moisture plus heat is worse than either alone, and a trace of copper in a wet blend is worse than the same copper in a dry one. The table is a list of variables to hold, not a set of independent switches. ## How a stability programme is built Run the study on the pack that will be sold, not on a laboratory bag. Long-term storage at 25 °C and 60% relative humidity, with an accelerated arm at 40 °C and 75% relative humidity, is the usual frame, modelled on ICH Q1A(R2); an intermediate condition at 30 °C and 65% relative humidity is used in some markets. Timepoints at 0, 3, 6, 12 and 24 months cover the questions a buyer usually asks. Test appearance, ferrous iron by cerimetry, total iron by ICP-OES, loss on drying, pH and microbiology at release. The ferric figure is the difference between the two iron results on the same basis, and it is the line that shows oxidation before the ferrous assay leaves its window. Water activity belongs in the blend study rather than the salt study. Include an in-use arm: open the pouch, take a portion, reseal it, and store it under the conditions the customer will use. A bulk drum that is opened daily in a humid room is the real storage condition for many buyers, and a sealed-pack study does not describe it. ## The matrix is part of the stability In a blend, the salt is no longer alone. Humectants such as glycerin or sorbitol raise water activity and make the iron mobile; alkaline actives raise the local pH; peroxide or aldehyde flavour components consume the ferrous iron directly. The same powder can be stable in one capsule and fail in another, and the difference is the formula. Iron also acts on the rest of the blend. It can catalyse the oxidation of fats and of sensitive vitamins, so the blend's own colour and assay have to be followed alongside the iron. A capsule that still passes its iron assay can have lost a sensitive companion ingredient, which is why the stability protocol belongs to the finished formula as well as to the raw material. Wet granulation adds water and heat in one step; direct compression avoids both but needs a powder that flows. The process route belongs in the stability discussion from the first trial, not after the formula is fixed. The grade page covers the physical variants that change the route. ## How the shelf life is set A shelf life is assigned from data on a named pack, not from a general rule about iron salts. For a raw material the usual instrument is a retest period: the lot is re-analysed at the end of the period and released again if it still meets the specification. For a finished product it is a shelf life, and the pack, the formula and the storage statement are all part of the claim. The catalog does not print a single shelf-life number for every pack. The specification states the period assigned to the pack you buy, and the stability report behind it should name the pack, the conditions and the batches. Ask for that report with the first quotation, and check that the pack in the study is the pack on the pallet. The storage statement that goes with it is short: keep dry, keep cool, protect from light, reseal after opening. The COA page shows the moisture line that the statement protects, the identity page shows how oxidation is measured, and the product page carries the catalog specification. ### 04 Ferrous gluconate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/ferrous-gluconate/moq/ Reviewed: 2026-11-18 The minimum order for ferrous gluconate is 1 kg, packed in a foil pouch, with a 25 kg fibre drum as the production pack. Lead time is 1–7 days for the catalog grade. A first order is really three things: a lot with a certificate, a pack that protects it, and a document set that lets it be released. In one lineOne kilogram is enough to qualify the powder; the pack, the lot and the paperwork are what the first order actually buys. ## Why the minimum is one kilogram One kilogram covers the work a new material has to survive: identity, the cerimetric assay, loss on drying, pH, particle size, a bench trial and a small pilot batch. It is also the smallest unit that can carry its own lot code, its own certificate and its own label without being repacked. Below that, handling and documentation take over from the powder itself. The minimum is not a threshold for better terms; it is the smallest unit that can be packed, labelled, certified and shipped as a lot. That distinction matters when a buyer asks for 200 g to “try it”. A 200 g portion is a sample, and it should be handled as one, with the sample's own paperwork. Ask whether the sample and the first order come from the same lot. If they do, the sample's certificate describes the powder in the drum. If they do not, the sample qualifies the grade and the first order still needs its own release. Both are legitimate; only one supports a claim about the drum you will use. ## The two packs Ferrous gluconate packs · what each one is for | Pack | Net | Role | Watch | Foil pouch | 1 kg | Moisture barrier; sampling and dispensing unit | Reseal after opening; the in-use period is shorter than the sealed period | Fibre drum with inner liner | 25 kg | Transit and production pack | Open in a dry area; the drum is not a dispensing unit The pouch is the pack that protects the powder, and the drum is the pack that protects the pouch. A drum left open in a humid room defeats both. If powder is transferred to a smaller container, the new container needs the product name, the hydrate, the lot code and the date; an unlabelled tub is not a lot anymore. The label carries the product name, the hydrate, the iron range, the lot code, the net mass, the manufacturing date and the storage statement. The certificate should travel with the lot, not in a separate email that is lost before the goods arrive. ## Lead time and what starts the clock The 1–7 days applies to the catalog grade in the catalog pack. The clock starts when the quantity, the pack, the destination and the document set are agreed, not when the first email is sent. A question about mesh or a request for an extra test pauses the clock until it is answered. Custom variants are a separate schedule. Granulated material and 100 mesh powder are made on request, and a granulation step adds time that the catalog figure does not describe. Transit is also separate: the 1–7 days is a release-to-dispatch window, not a delivery promise. For a production run, give the required delivery date and the packing list at the enquiry stage. A 25 kg drum order that arrives after the batch has been scheduled is a different problem from a late quotation. ## Six things a quotation needs - Identity: ferrous gluconate dihydrate, iron 11.8–12.5% on the dried basis, 80 mesh, and the CAS number. - Quantity and pack: how many 1 kg pouches or 25 kg drums, and whether a mixed pallet is allowed. - Destination and Incoterm: the delivery point and who arranges the movement. - Documents: COA, TDS, SDS, allergen and GMO statements, and any additional test the buyer needs. - Label and marks: the customer's label text, lot marking and any pallet configuration. - Date: the required delivery date and whether a partial shipment is acceptable. A quotation that answers five of the six is not comparable with one that answers all six. The missing line is usually the document set or the destination, and both change what can be shipped. ## Samples and what they prove Ask for a sample with a purpose attached: identity confirmation, a bench trial, a stability arm or a customer's approval. The purpose decides the quantity, the tests that should accompany it and whether the sample has to come from the production lot. A sample should carry the lot code, the certificate and the date. Keep a portion of it as the retained sample, and record what was tested on it. A sample without a lot code is a demonstration, not a reference; if a result is disputed later, it cannot be tied to the drum. Sample handling follows the same rules as the bulk: keep it dry, keep it sealed, keep it cool, and note when it was opened. A sample left open on a lab bench for a month is not evidence about the lot. ## The terms that make the specification enforceable The commercial terms decide whether the specification has any effect. Agree the payment terms and the Incoterm in writing, and state the period for which the quotation holds. A quotation with no validity date is a snapshot, not an offer. Put the documents in the terms: which certificate ships with each lot, which statements are issued once and which are lot-specific, and what happens if a lot fails a line. Name the retained sample and the period it is kept. The COA page lists the lines the certificate has to carry; the compliance page lists the documents a regulated market expects. Finally, agree the shelf life at shipment and the storage statement. The stability page explains why the pack belongs in that conversation. The catalog line is on the product page, and the RFQ template turns the six quotation items into a form. ### 05 Where ferrous gluconate is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/minerals/ferrous-gluconate/compliance/ Reviewed: 2026-11-18 Ferrous gluconate is a permitted iron source for food supplements in the European Union, the United States and the United Kingdom. Permission attaches to the form, not to the dose or to a claim. The file has to show the form, the level, the contaminants and the label, and each market asks for them in a different document. In one lineFerrous gluconate is a permitted iron source in the EU, the US and the UK, and the file has to show the form, the level and the label. ## Three questions, not one Compliance for an iron salt splits into three questions that are often answered as if they were one. Is the form permitted in this market? Is the amount allowed in this product? Does the label and the claim match what was used? A permitted form says nothing about the maximum dose, and a compliant dose says nothing about the wording on the pack. This page covers the raw-material side and the file around it: identity, specification, contaminants, documents and the label checks a buyer has to make. The finished product's dose, matrix and label copy belong to the brand. ## European Union Iron sources for food supplements are listed in Annex II to Directive 2002/46/EC, as amended. Ferrous gluconate is on that list, and the same list governs the iron forms that may be added to foods under Regulation (EC) No 1925/2006. The EU harmonises the list of forms, not the maximum amount of iron in a supplement. Maximum levels are set by Member States, and they differ, so the target market has to be named before the dose is fixed. The EU regulatory note sets out the framework and the Member State variation. Contaminants sit in Regulation (EU) 2023/915, which replaced Regulation (EC) No 1881/2006. Labelling follows Regulation (EU) No 1169/2011: the ingredient list names the iron source, and the nutrition declaration reports iron in milligrams and as a percentage of the 14 mg reference intake. Claims follow Regulation (EC) No 1924/2006 and the authorised list. ## United States Ferrous gluconate is affirmed as generally recognised as safe for use as a nutrient supplement under 21 CFR 184.1308, with no limitation other than current good manufacturing practice, and the regulation points to the Food Chemicals Codex for the specification. A dietary supplement containing it is made under the supplement cGMPs in 21 CFR 111; there is no pre-market approval of the ingredient or the product. The Supplement Facts panel declares iron in milligrams and as a percentage of the 18 mg Daily Value, and the ingredient list names the source. The figure is visible to the consumer and has to be supported by the formula arithmetic. The US has no federal maximum level for lead, arsenic, cadmium or mercury in dietary supplements. State regimes, customer specifications and voluntary compendial standards such as USP <2232> fill that gap, so the catalog limits are a buyer requirement as much as a legal one. Structure/function claims are allowed with the required notification and wording; disease claims are not. ## United Kingdom GB retained the food-supplement framework after IP completion day. The permitted iron list in the retained Annex II includes ferrous gluconate, and the Food Supplements (England) Regulations 2003 and their devolved equivalents provide the domestic instrument. Nutrition labelling and claims follow the retained versions of Regulations 1169/2011 and 1924/2006. Contaminant limits are also retained, but the EU has recast its rules into 2023/915 while GB maintains its own text. The numbers have tracked closely, and divergence is possible; check the current GB instrument rather than assuming the EU figure. Northern Ireland continues to apply the EU list under the Windsor Framework, so a pack sold across the Irish Sea can face two regimes. ## The limits, side by side Contaminant limits for ferrous gluconate in food supplements | Parameter | EU food supplement | US federal | Catalog limit | Lead (Pb) | 3.0 mg/kg | No maximum level | ≤3 mg/kg | Cadmium (Cd) | 1.0 mg/kg | No maximum level | ≤1 mg/kg | Mercury (Hg) | 0.10 mg/kg | No maximum level | ≤0.1 mg/kg | Arsenic (As) | No maximum level | No maximum level | ≤2 mg/kg | Microbiology | General food-safety duty | cGMP; no numeric limit | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent The catalog limits for lead, cadmium and mercury are the EU maximum levels themselves, which leaves no headroom. The maximum level applies to the food as sold, so a supplement built mostly from this powder has nowhere to put a second contributor; a formula with several mineral sources needs a tighter raw-material limit or a dilution calculation. Arsenic at ≤2 mg/kg is a buyer limit: the EU sets no general maximum level for arsenic in supplements. ## Where the claim boundary sits The EU and GB registers carry authorised claims for iron, and they attach to the nutrient in the finished product, in the authorised wording and under the stated conditions of use. They do not attach to the raw material, and they are not a description of the salt. “Ferrous gluconate” is an ingredient name; it is not a health claim. No disease claim is permitted in any of the three markets. In the US a structure/function claim needs the notification and the disclaimer that the rules require, and it still cannot describe a disease. This page makes no health claim for the material; the label copy belongs to the brand and its regulatory reviewer. ## The document set Documents that travel with a ferrous gluconate lot | Document | What it must show | Scope | Certificate of analysis | Lot, tests, methods, limits, results and basis | Every lot | Specification | The agreed identity, assay, physical and contaminant limits | Per product | Technical data sheet | Identity, typical values, solubility, packing and storage | Per product | Safety data sheet | Hazard, handling and transport information | Per product | Allergen and GMO statements | Declarable allergens and GM status | Per product | Manufacturing flow and origin | Site, route and country of origin | Per supplier | Certification | Quality or food-safety certificate, if held | Per site A certificate alone is not a file. The specification is what the certificate is written against, and the statements are what the brand needs when its own customer asks. ## Release checklist - Form and hydrate named, with the CAS number, on the certificate and the label. - Iron range stated on the dried basis, with the cerimetric method and the loss-on-drying result. - Ferric iron or colour reported, not only the ferrous assay. - Contaminants compared with the destination's limits, not with a generic panel. - Microbiology within the catalog limits, with the absence tests named. - Label ingredient name matches the permitted list; iron declared in mg and as the reference percentage. - Claims limited to authorised wording; no disease claim anywhere in the file. - Documents complete for the lot, and the retained sample identified by the same lot code. The COA page shows where each figure sits on the certificate; the identity page covers the tests behind the form; the quality page describes the release file; and the product page carries the catalog specification. ### 06 How we prove a ferrous gluconate lot is the ferrous salt URL: https://nutrition.rainwoodbio.com/products/minerals/ferrous-gluconate/identity/ Reviewed: 2026-11-18 A ferrous gluconate lot has to be proved on four levels: the declared name and hydrate, the ferrous reaction and infrared spectrum, the cerimetric iron assay on the dried basis, and the contaminant and physical limits. The assay is the only one of the four that puts a number on the ferrous state, and it is blind to everything else. Identity is the four levels together, not the iron percentage alone. In one lineThe ferrous state is the identity: a total-iron figure, an infrared spectrum and a ferric check together prove the salt. ## Four layers, four different failures What each identity layer proves and what it cannot | Layer | Test | What it proves | What it misses | Document | Name, hydrate, CAS, formula | The file is about the right molecule | Nothing about the powder | Chemical identity | Ferrous reaction and infrared spectrum | The ferrous ion and the gluconate ligand | Not a quantity | Assay | Cerimetric Fe(II), dried basis | Ferrous iron content | Blind to Fe(III), water and other salts | Condition | Loss on drying, pH, mesh, metals, micro | Fitness for the specification | No proof of identity Each layer catches a different failure. The document catches a wrong name or a missing hydrate; the chemical identity catches a different salt or a different oxidation state; the assay catches a weak or diluted lot; the condition tests catch a lot that is the right molecule but not the right material to ship. A certificate with ticks in all four columns is auditable. One with an iron figure and nothing else is a single number doing four jobs. The ferrous reaction is the old, simple one: an aqueous solution of the salt gives a dark blue precipitate with potassium ferricyanide. It is sensitive to the ferrous ion and it is not specific to gluconate, which is why the infrared spectrum sits beside it. The infrared comparison identifies the gluconate ligand; the reaction identifies the oxidation state. ## Ferrous iron is a number; ferric iron is a difference Cerimetric titration is a redox method. Cerium(IV) oxidises iron(II) to iron(III), one electron at a time, and the end point is read with an indicator such as orthophenanthroline. Iron(III) in the sample is already oxidised and consumes no titrant, so the result is ferrous iron only. Expressed as iron, each millilitre of 0.1 N ceric sulfate corresponds to 5.585 mg Fe; expressed as the dihydrate, 48.22 mg. Ask which convention the certificate uses. Total iron needs a different method: ICP-OES or atomic absorption, both of which see every iron atom regardless of oxidation state. Run the two on the same sample, on the same basis, and subtract: ferric iron equals total iron minus ferrous iron. If total iron reads 12.4% and ferrous iron 11.9%, the difference is 0.5% ferric as Fe, about 4% of the iron. Both figures are percentages of iron, not of a ferric compound. The catalog specification does not set a separate ferric limit. The ferrous assay is the control, and the ferric figure is a supplementary test that the buyer and supplier should agree for the grade. That is a gap worth closing: a lot can sit inside the 11.8–12.5% window with a measurable ferric fraction, and the window alone does not say whether the fraction is acceptable. Colour supports the number — a yellow-brown cast is a prompt, not a result. ## What the infrared and X-ray methods add The infrared spectrum is a fingerprint of the gluconate ligand. Carboxylate absorption sits near 1600 and 1400 cm⁻¹, the broad hydroxyl band near 3400 cm⁻¹, and the whole spectrum is compared with a reference rather than interpreted band by band. IR answers “is this the gluconate salt?” It does not answer “how much iron?” and it is not a purity assay. X-ray diffraction reads the crystal lattice. It distinguishes the dihydrate from the anhydrous salt and from other crystalline phases, and it can show a crystalline ferric phase such as goethite if one is present above the detection limit. It will not see amorphous ferric hydroxide, which has no lattice to diffract. That is why XRD belongs beside the cerimetric and total-iron results rather than in place of them. Ask the laboratory for the reference spectrum or the reference pattern, the detection limit and the sample preparation. A “conforms” with no reference named is a comparison with something unnamed. The FTIR method note and the XRD note explain what each technique can support. ## The routes that change one number at a time Adulteration routes for ferrous gluconate and the tests that show them | Route | What moves | Test that shows it | Oxidised or ferric gluconate | Ferrous falls, total stays, colour darkens | Cerimetry against total iron | Another ferrous salt | Iron may rise; sulfate or ash moves | Infrared, sulfate and ash | Iron oxide or ferric powder | Total iron rises, ferrous does not | XRD plus the ferric difference | Dextrose or maltodextrin diluent | Iron falls, moisture and IR change | Assay, IR and loss on drying | Excess water | As-is iron falls, dried basis holds | Loss on drying beside the assay The routes share a signature: one number moves while another stays. That is why the numbers have to be read in pairs. A high total with a normal ferrous figure points to an added ferric or elemental source; a low ferrous with a normal total points to oxidation; a low iron with a high loss on drying points to water or a diluent. A declared blend is not adulteration. If the powder contains ferrous gluconate and another iron source, the label has to name both, and the certificate has to report the contribution. The defect is the undeclared blend, not the blend itself. ## How to write the identity specification - “Ferrous gluconate dihydrate, C₁₂H₂₂FeO₁₄·2H₂O, CAS 299-29-6.” - “Identification: ferrous reaction and infrared spectrum against a named reference.” - “Iron(II) 11.8–12.5% on the dried basis by cerimetric titration; loss on drying ≤8.0%.” - “Total iron by ICP-OES reported; ferric iron calculated as the difference.” - “pH (5% solution) 3.0–5.0; ≥95% through 80 mesh.” - “No added ferric salt, iron oxide or diluent; heavy metals and microbiology as the catalog.” A specification written this way tells the laboratory what to measure and tells the supplier what will be rejected. “Assay 12%” on its own does none of that. ## Five questions for the supplier - Is the iron result ferrous iron by cerimetry, and on which basis is it reported? - What is total iron by ICP-OES for this lot, and what is the ferric difference? - Which hydrate and CAS are declared, and does the IR spectrum match a named reference? - What are the loss on drying, pH and particle-size results for this lot? - Who manufactured the lot, and can the batch record and retained sample be tied to the lot code? Five answers amount to an identity file. A single iron percentage does not. The COA page shows where each figure sits on the certificate, the grade page places the salt among the alternatives, and the product page carries the catalog specification. ### 01 What the COA for iron pyrophosphate actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/iron-pyrophosphate/coa/ Reviewed: 2026-11-18 The certificate for a ferric pyrophosphate lot reports appearance, iron by ICP-OES, identification reactions for iron and pyrophosphate, loss on drying, particle size, bulk density, heavy metals and microbiology. Each line should show the method and the release limit, and every result should belong to the lot named at the top. The catalog window is 24.0–26.0% elemental iron; the batch COA confirms a particular drum. An iron figure alone does not separate the ferric salt from a ferrous source or an iron oxide. In one lineAn iron result of 24.0–26.0% says how much iron is in the drum, not which iron salt holds it. ## The certificate as a test report A certificate earns its place when every line can be checked. For each parameter the certificate should name what was measured, the method behind the number, and the limit the lot had to meet. For a mineral salt the identity block comes first, because complete physical results for the wrong salt are still the wrong salt. Identity, assay and moisture · ferric pyrophosphate | Test | Method | Limit at release | Appearance | Visual | White to yellowish, fine powder | Identification, iron | Wet reaction | Conforms | Identification, pyrophosphate | Wet reaction after hydrolysis | Conforms | Iron (Fe) | ICP-OES | 24.0–26.0% | Loss on drying | Gravimetric | ≤5.0% | Particle size | Sieve analysis, 200 mesh | ≥95% through The two identification lines are not interchangeable. The iron reaction answers for ferrous fumarate, ferrous sulfate and iron oxide as readily as for this salt; only the pyrophosphate reaction narrows the answer. A certificate that prints "iron: conforms" and stops has tested half the material. Physical, contaminant and microbiological limits | Test | Method | Limit at release | Bulk density | Cylinder method | 0.40–0.80 g/mL | Lead | ICP-MS | ≤3 mg/kg | Arsenic | ICP-MS | ≤2 mg/kg | Cadmium | ICP-MS | ≤1 mg/kg | Mercury | ICP-MS | ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent ## What the iron percentage measures Iron is reported as elemental iron. A result of 25.0% means 25 g of Fe in 100 g of powder, not 25% ferric pyrophosphate; the salt makes up most of the remaining mass with the water in the formula. ICP-OES measures the element in solution and cannot tell whether the iron arrived as Fe(II) or Fe(III). The valence needs another test. The formula, Fe₄(P₂O₇)₃·xH₂O, sets what the iron figure can be. The anhydrous salt is about 30% iron by mass, and each molecule of water dilutes it. At roughly eight molecules of water the figure falls to about 25%, where the catalog window sits. A lot well above 26% describes another hydrate state or an added iron source; a lot well below 24% describes dilution or a different salt. Loss on drying is a separate measurement. The water written into the formula is held in the crystal and is not necessarily removed under the conditions of the test, so a 3% LOD is not proof of an anhydrous powder. Read the LOD as surface moisture and handling history; read the iron result with the declared hydrate as the description of the salt. ## The limit and the batch result A limit is the gate; a batch result is what the laboratory found. They belong in separate columns, and a column that merely repeats the range has not reported anything. An iron result of 24.1% and one of 25.9% both pass, yet they ask for different powder weights per dose; a lot at 95.0% through 200 mesh and one at 99.5% behave differently in a blender even though both pass. What a usable result column shows | Parameter | Limit | The result column should give | Iron | 24.0–26.0% | The lot's ICP-OES figure, with the method named | Loss on drying | ≤5.0% | The measured percentage, not "complies" | Particle size | ≥95% through 200 mesh | The percentage passing and the sieve method | Heavy metals | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Four separate results in mg/kg Some lines need a number rather than a range. A contaminant result needs a figure and a detection limit; a microbiology line needs the count and the absence statement. "Passes specification" is a conclusion, and it should be possible to draw it from the figures above it. ## What moves between batches Iron moves with hydration, because water dilutes the metal, and with the reaction yield. A stable process still shows a spread inside the window. Milling is the largest source of physical variation. A sieve result of "95% through 200 mesh" is one cut, not a distribution: two lots can pass the same sieve and differ in the fines that make dust and the coarse tail that settles in a drink mix. Bulk density moves with the same step, which is why 0.40–0.80 g/mL is a wide window. Colour is the qualitative line. White to yellowish covers a real range; a strong yellow or brown tint can follow a hot drying step, a trace of iron oxide or a different hydrate. Ask for the batch record before rejecting on tint, and watch a trend rather than one result at the edge. ## When to order an outside test An independent test is worth ordering when the source is new, when a first shipment enters a regulated market, when a form is claimed but not evidenced by the supplier's own data, or when two laboratories disagree. The useful panel is targeted: ICP-MS for the heavy metals, X-ray diffraction for the crystalline phase, ion chromatography or a phosphate method for the pyrophosphate, and a speciation test for the valence. Ask the laboratory to report its detection limit beside every "not detected". A screen without a limit says something about the instrument, not about the drum. The iron report should name the technique, the sample preparation and the basis, not only the percentage. Chain of custody decides whether the report is evidence. The material tested and the material kept on file should be the same sample, identified by lot code. ## What to compare between suppliers Line up six items: the species and hydrate declared; the iron result and its method; the pyrophosphate identity and the iron-to-phosphate ratio; loss on drying; particle size and bulk density; the contaminant and microbiology panel. Two certificates that agree on iron and diverge on the other five are describing different powders. Traceability is the second layer. The lot code should be the same on certificate, pack label and retained sample, and the certificate should name the manufacturing site. The catalog specification sits on the iron pyrophosphate product page. The grade page compares the physical lines; the identity page runs the tests that separate the ferric salt from a ferrous one; the release workflow is on the quality page. The method is explained in the ICP-OES note. ### 02 Micronized or coarse: choosing an iron pyrophosphate grade URL: https://nutrition.rainwoodbio.com/products/minerals/iron-pyrophosphate/grades/ Reviewed: 2026-11-18 Micronized ferric pyrophosphate at 200 mesh and a granulated grade carry the same salt and meet the same 24.0–26.0% iron window. What differs is the particle-size distribution and the bulk density, which decide how the powder flows, how much dust it raises and how long it stays suspended in a drink mix. The dosage form and the process choose the grade, not the iron percentage on the first quotation. The catalog sheet describes the micronized grade; a granulated lot is agreed on its own mesh and density. In one lineThe grade changes the powder, not the salt: the iron window stays, while particle size and density decide where the material can be used. ## One salt, two powders Micronization is a milling step that takes the crystallised salt down to a fine powder; granulation builds those fines into larger, more stable particles. Neither step changes the ferric pyrophosphate chemistry or the iron window, and neither changes the ingredient name on the label. What changes is the surface area per gram and how the powder behaves in air, in a hopper and in water. The practical differences appear downstream: a fine powder blends quickly but dusts, while a granule flows but settles faster. The choice is therefore a process decision, made with the dosage form and the filling equipment in view rather than from a catalogue sheet alone. ## Micronized and granulated side by side Micronized 200 mesh and granulated · what differs | Property | Micronized, 200 mesh | Granulated, on request | Particle size | ≥95% through 200 mesh (about 74 µm) | Agreed at order; coarser and free-flowing | Bulk density | 0.40–0.80 g/mL | Confirmed per lot; usually higher | Flow | Cohesive; can bridge in a hopper | Flows more evenly at high speed | Dust and static | Noticeable; extraction needed at weighing | Low; easier to handle in an open room | Wetting | Fines float and clump without shear | Wets through, then disperses | Settling in suspension | Slower; stays cloudy longer | Faster; visible sediment sooner | Tablet compression | Fine powder; may need granulation | Better compressibility as supplied | Usual format | Capsules, stick packs, suspensions | Tablets, dry blends, high-speed filling Only the micronized column is a catalog grade with printed limits. The granulated column describes a family of lots, each with its own sieve result and density, so a granulated offer has to be read with the numbers attached. ## What the physical numbers mean 200 mesh is a sieve opening of about 74 µm. "≥95% through" means at most 5% is retained on that sieve; it does not mean every particle is below the cut, and it says nothing about the fines underneath. The fines are the fraction that dusts, floats on water and resists wetting, so two lots that both pass the sieve can still behave differently in the same process. Bulk density is measured on a known volume of powder in a cylinder, and the catalog window of 0.40–0.80 g/mL is wide because density depends on the mill, the feed rate and the drying route. The figure sets the fill volume: a capsule or a stick-pack scoop sized around 0.40 g/mL will not hold the same mass if the next lot arrives at 0.80 g/mL. Density and mesh travel together, which is why a grade change is never just a sieve change. ## Which grade fits which dosage form In a capsule, the micronized grade fills by volume and needs a hopper that does not bridge; the dust is a containment issue at the weighing station. In a tablet, the same powder may need roller compaction before compression, while a granulated grade can run directly on a press. In a stick pack or a sachet, the micronized grade disperses with less grit but can clump on the surface of the liquid if it is not wetted properly. In a dry blend, particle size matching matters as much as the iron figure. A fine iron powder added to a coarse blend can sift downwards during transport and leave the top of the batch short of iron; a granulated grade closer in size to the other ingredients distributes more evenly. In a ready-to-drink suspension, the micronized grade settles more slowly, but no grade dissolves, so the pack still needs a dispersion aid and a shake instruction. ## What changes when you change grade Four things move at once. The certificate lines change: mesh, bulk density and possibly loss on drying. The purchase specification has to be rewritten around the new mesh and density, or the certificate arrives against the wrong document. The process needs a qualification run covering feeder settings, blending time, fill weight and dust extraction. And the pack may change, because a lighter powder needs more volume for the same mass. The label does not change. The ingredient is still ferric pyrophosphate, and particle size belongs in the specification rather than in the ingredient name. A label that says "micronized" is making a factual statement, and the sieve result on the certificate should support it. A validated tablet or capsule process developed on one grade makes the other grade a change control, not a substitution. ## Where a switch goes wrong Do not move a suspension to a coarse grade without expecting faster settling and a harder sediment. Do not move a high-speed tablet press to the micronized grade without a trial, because dust and low density can slow the feed and change the fill weight. And do not accept a "coarse" offer that names no mesh and no density: without those figures there is no grade to compare, only a description. The specification is on the iron pyrophosphate product page. The certificate behind it is read on the COA page; the behaviour in a formula is covered on the stability page; the ordering formats are on the MOQ page. Mesh and density are defined in the particle-size and bulk-density entries, and the ferrous alternative is compared on the ferric versus ferrous fumarate page. ### 03 Ferric pyrophosphate is stable dry; dispersion and the matrix decide the rest URL: https://nutrition.rainwoodbio.com/products/minerals/iron-pyrophosphate/stability/ Reviewed: 2026-11-18 A sealed pack of ferric pyrophosphate holds its iron assay and its white-to-yellowish colour because the iron is already in the ferric state and the salt is practically insoluble in water. The dry powder is the simple case; the finished formula is where the questions start. In a dispersion the powder settles, in a moist blend it can cake, and in an acidic or reducing matrix the iron can move into a more reactive state. The pack, the water activity and the matrix decide the shelf life, not the drum alone. In one lineDry and sealed, the salt is stable; the matrix, the pH and the pack decide what happens once it is dispersed. ## What the dry powder tolerates Ferric iron is already oxidised, so the colour drift that follows ferrous iron in a moist powder has no ferrous starting point here. The salt is practically insoluble, which limits hydrolysis in a dry blend. Loss on drying is capped at ≤5.0% and reports surface moisture; the water built into the formula is not necessarily removed under the conditions of the test, so a low LOD says more about handling than about the hydrate. What the dry powder does not tolerate is humidity cycling. A drum opened and closed in a humid room takes up moisture at the surface, and the fines cake into lumps that no longer pass the 200-mesh sieve evenly. Heat is a slower risk: a drying step that ran hot can leave a yellow tint and harder aggregates, which shows up in colour and dispersion before it shows in the assay. ## Dispersion, not solution Ferric pyrophosphate is practically insoluble in water. In a drink mix it is a suspension, not a solution, and every behaviour follows from that: the particles settle, the liquid stays cloudy, and the iron is not free in the water until the pH falls. The settling rate rises with the square of the particle diameter, which is why the micronized grade stays suspended longer than a granulated one. In an acidic beverage some of the salt can dissolve, and dissolved ferric iron is more mobile and more reactive than a particle sitting at the bottom of a bottle. The same shift matters in a fruit-based matrix or any formula with a low pH. In solid dosage forms the water activity is low enough that this route is closed, which is one reason capsules and tablets are the simpler home for the salt. Where the powder meets water | Situation | What happens | What to control | Sealed drum or pouch | No change while the pack stays closed | Humidity at opening and resealing | Dry blend | Particles stay separate unless water is picked up | Water activity and pack liner | Aqueous suspension | Settling; cloudiness; no dissolution | Wetting, shear, suspending agent | Acidic drink | Partial dissolution; more mobile iron | pH, colour, odour, shelf trial | Capsule or tablet | Low water activity; dispersion on ingestion | Moisture during compression ## The four factors that move it The factors are moisture, heat, pH and redox. Moisture cakes the powder and mobilises iron at a particle surface. Heat drives off surface water but can also change aggregation and colour. pH decides how much iron dissolves. Redox decides the valence: ascorbic acid and some reducing sugars can reduce ferric iron to ferrous, and the ferrous form is the one that takes part in colour and oxidation chemistry. The matrix adds its own terms. Fats and oils are sensitive to iron-catalysed oxidation, and a small amount of mobile iron can start a rancid note. A chelating agent such as citrate or EDTA can solubilise iron and raise its reactivity, even where it improves dispersion. The interaction to watch is not the salt alone but the salt plus water plus a reducing or chelating neighbour. ## A protocol that answers the question Test the powder and the finished product separately. For the powder, run 25 °C/60% RH long term, 40 °C/75% RH accelerated, and an open-pack arm that mimics a pouch in use. Time points of 0, 1, 2, 3, 6, 12 and 24 months for the long-term arm, and 0, 1, 2, 3 and 6 months for the accelerated arm, are the usual frame; the exact set belongs in the written protocol, not in a later summary. Measure iron by ICP-OES, loss on drying, appearance, mesh and bulk density at each point, and add microbiology at the start and the end. For the finished product, measure the matrix: colour instrumentally, pH, sediment volume or redispersibility, and a sensory panel for grit and taste. A powder that passes every chemical test and a drink that separates in three weeks are two different results, and only one of them is about the customer. ## Formulating around an insoluble salt Formulate for dispersion first. A suspending agent and a shear step keep the particles apart; without them the fines settle into a compact layer. Wetting is the other half: a powder that floats on the surface will not disperse no matter how fine it is, so a short high-shear mix before the bulk of the water goes in is more useful than a longer gentle stir. Then control the redox environment. Keep the water activity low in a stick pack, keep the pH away from the range where the salt dissolves, and check any reducing ingredient against colour and odour in a trial rather than on paper. Antioxidants and chelating agents are not neutral here: they can protect the matrix or mobilise the iron, and only the trial says which one happens. ## Assigning a shelf life The drum and the finished pack carry different dates, supported by different data. The drum's date rests on stability data for the pack that is shipped, with the storage condition written on the label. The finished product's date is supported by the brand's own data on the matrix, and it can be shorter than the material's remaining life even when the assay is unchanged. Write the in-use rule into the specification: reseal the pouch, keep the drum liner closed, store below the stated temperature and away from strong odours. A re-test on receipt is a useful control when a lot has been in transit. When a date is close, ask for the stability data that supports it rather than a new certificate; the certificate describes the lot, not the clock. The specification is on the iron pyrophosphate product page. The certificate behind it is read on the COA page; the grade and mesh are compared on the grade page; packaging is covered on the MOQ page. The loss-on-drying entry defines the moisture test, and the iron measurement is described in the ICP-OES note. ### 04 Iron pyrophosphate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/iron-pyrophosphate/moq/ Reviewed: 2026-11-18 The minimum order is 1 kg, packed as a foil pouch and drawn from a released lot; production quantities ship in 25 kg fiber drums. The quoted lead time is 1–7 days for material in stock, measured from confirmation of grade, pack and destination. A quotation is built from six details, and the sample is the same released material in the smaller pack. In one lineA kilogram is enough to qualify the powder, the 25 kg drum is the production pack, and the grade, quantity and destination decide how the order is quoted. ## Why the minimum is one kilogram The first kilogram is for qualification, not for stock. It covers bench work, a pilot fill or compression run and a short stability check, and it is drawn from a lot that has already been released, so trial powder and certificate belong to the same production batch. The kilogram is a packing and documentation unit, not a bulk threshold. A larger order is filled from the same lot where the lot allows; otherwise a new lot is raised and carries a new certificate. The minimum exists so that a formulator can test the real material without buying a drum. ## Packs and what they protect Standard packs · ferric pyrophosphate | Pack | Use | Notes | 1 kg foil pouch | First trial, sample, small run | Sealed food-grade liner; name, grade and lot printed on it | 25 kg fiber drum | Production | Lined drum with a tamper-evident seal; lot label outside | Granulated, on request | Process-specific | Mesh and density agreed at the order stage The liner is what the powder actually touches. A pierced liner or an unsealed drum changes what the powder sees, whatever the label claims. For a humid destination, add a desiccant to the packing specification when the order is placed. Every pack should carry the product name, grade, net mass, lot and storage condition; if those details do not line up with a certificate, traceability has already broken down. Handle both packs in a dry area, and close them promptly. The pouch is built for use, not for retail, and needs resealing between weighings; fold the drum liner closed instead of leaving it open. ## Lead time and what starts the clock The window is 1–7 days from confirmation, and confirmation means grade, quantity, pack and paperwork agreed. A non-standard mesh or a granulated lot is scheduled before it is packed, and an outside laboratory test adds its own time; both appear separately on the quotation. Three things usually move the date: a specification changed after confirmation, paperwork asked for at the last minute, and a destination rule that requires a licence or an additional test. Settling all three at the start saves the date; chasing them later rarely does. If there is a launch date, it belongs in the brief rather than in a follow-up message. ## Six details a quotation needs What the enquiry should state | Detail | Why it changes the offer | Material and grade | Micronized 200 mesh, or a granulated grade with its mesh and density | Quantity | First order and expected annual volume set the lot and the pack | Pack | Pouch, drum or a mix; a desiccant is a packing decision | Destination and Incoterm | Country, address and delivery term decide the documents and the route | Documents | COA, specification and SDS, plus any statement the market requires | Required date | The date the material is needed, not the date the purchase order is raised At the enquiry stage a competitor's certificate does the work of a written brief, because it lists the tests and limits the buyer already works to. Send one and the answer can be a counter-specification: what matches, what cannot, and what would need a trial. ## Samples and the trial Samples come out of a released lot and carry that lot's certificate. Ask for the grade the trial will run — 200 mesh, granulated or a specific density — or the trial will answer a different question from the one the production order asks. Size the sample against the trial protocol: enough for the panel and a reserve. Retain part of the sample as a reference, so a later trial result can be set against the production lot. Without a certificate, a sample is a demonstration rather than a qualification, and a sample drawn from another lot is a different material as far as traceability is concerned. ## Terms to settle before the purchase order Four terms belong in the order paperwork from the start: the specification version, the certificate for each lot, the retention sample and the remaining shelf life on arrival. Add the quantity tolerance, the rejection window and the route for a damaged pack. Payment terms and the Incoterm are confirmed in the order, because destination, quantity and account history all affect them; no website statement covers every order. A grade change after the purchase order is a change control rather than a note on the packing list, and it should be quoted and scheduled as one. Any damage or shortfall should be reported at opening, with photographs of the pack and of the lot label, so the claim can be tied to the lot record. The specification is on the iron pyrophosphate product page. The COA page sets out what arrives with the lot; the grade page shows what a grade change does to an order; the compliance page sets out the documents a market may request. The terms are defined in the MOQ and lead-time entries, and the lot record is described on the quality page. ### 05 Where iron pyrophosphate is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/minerals/iron-pyrophosphate/compliance/ Reviewed: 2026-11-18 Ferric pyrophosphate is listed in the European Union as a permitted iron source for food supplements, under the name ferric diphosphate, and it is sold as a dietary ingredient in the United States and under the retained list in Great Britain. That listing is the first of four checks; the contaminant ceiling, the wording on the label and the claim rules each apply on top of it. Iron has no single EU-wide maximum in supplements, so some Member States apply national figures that a brand has to check market by market. In one lineA place on the permitted list opens the market; the contaminant file, the label and the claim rule each have to be satisfied separately. ## Four checks, four instruments Permission comes from a list. The European Union publishes the substances that may be used as vitamin or mineral sources in supplements; the United States approaches it through dietary-ingredient provisions; the United Kingdom keeps a retained list of its own. Being on one list says nothing about another, and a listing never lifts the limits underneath it. Contaminants are a ceiling applied to the finished supplement, not to the drum. Labelling is a third discipline: the source has to be named the way the law names it, and the elemental iron has to appear in the nutrition declaration. Claims are a fourth, and they are narrower than most marketing copy assumes. A file that answers all four is a compliance file; a certificate alone is not. ## European Union Annex II to Directive 2002/46/EC lists the iron forms permitted in food supplements, and ferric diphosphate (ferric pyrophosphate) is one of them. That entry permits the source; it does not settle the dose, because the Directive does not set a harmonised maximum for iron and several Member States apply national figures. The EU regulatory summary gathers the instruments, and the Annex II entry explains what a listing does and does not cover. The label has to name the source as the list names it, give the elemental iron in mg, and show its share of the 14 mg reference intake, while keeping the salt and the elemental figure consistent. A product that declares iron without naming the salt has told the consumer nothing about the form; a product that names the salt but declares the salt mass as iron has mislabelled the dose. Contaminants fall under Regulation (EU) 2023/915, which sets limits on the product as sold. Those limits are not raw-material limits, and that difference is where most of the compliance work lies. ## United States In the United States, ferric pyrophosphate is used as a dietary ingredient. There is no permitted-substances list of the European kind; the seller has to hold a basis that the material is lawful for the intended use, and the label, the claim rules and the batch records still apply. The Supplement Facts panel gives elemental iron against an 18 mg Daily Value, and the ingredient list carries the salt name. Iron carries a safety rule that other minerals do not. A solid oral supplement that supplies 30 mg or more of iron per dosage unit has to carry the accidental-overdose warning in 21 CFR 101.17(e); check the current text before the artwork is signed off. California Proposition 65 sits alongside the federal position, and what triggers it is the daily lead exposure rather than a concentration on its own, as the Proposition 65 entry explains. ## The contaminant table Contaminant limits for food supplements, as of this review | Element | EU | US | UK | Lead | 3.0 mg/kg (product as sold) | No federal limit for supplements; state law may apply | Retained EU limit; confirm current UK law | Cadmium | 1.0 mg/kg | No federal limit for supplements | Retained EU limit | Mercury | 0.10 mg/kg | No federal limit for supplements | Retained EU limit | Arsenic | No EU-wide figure; national rules vary | No federal limit for supplements | Check current UK law The catalog specification for this salt is Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg. Those figures match the finished-product ceiling numerically, but they govern a powder that will be diluted by the rest of the formula. Where the salt occupies a fifth of the fill, the other four fifths dilute its contribution, so the powder may sit above the finished limit; where the stick pack is mostly the salt, it may not. Work the ceiling backwards from the serving, not forwards from the drum. Do the calculation before ordering: take the raw-material result, multiply by the share of the serving that the salt occupies, and hold the answer against the finished-product limit. Then put that ceiling into the purchase specification. ## Claims and the label boundary The European Union authorises a short list of iron claims in Regulation (EU) No 432/2012, each with its own conditions of use, and they speak of a contribution to normal function rather than of a disease or an outcome. This site does not reproduce them and makes no health claim for the material; the claim sits with the brand that prints it and the authority that permits it. On the US side, a structure/function statement is the brand's responsibility, has to be truthful and substantiated, and carries the DSHEA disclaimer. On both sides of the Atlantic, a disease-related claim is not available. A sentence about where the powder is filled is a description of the material and is safe on a technical page; a sentence that names a condition is not. ## The document pack - Batch certificate covering iron by ICP-OES, pyrophosphate identification, loss on drying, mesh, density, heavy metals and microbiology. - Specification and technical data sheet that name the salt, the CAS number and the grade. - A safety data sheet with the standard 16 sections. - Statements on allergens, GMO status, origin and irradiation. - Facility certificates with their scope, confirmed for the site that made the lot. - Stability data supporting the shelf life on the pack. - The nutrition calculation that converts the salt mass into elemental iron per serving. ## A short pre-shipment checklist Checks before the first shipment | Check | Evidence | Where it fails | Permitted form | Annex II entry or the US dietary-ingredient basis | The ingredient is named by a synonym the list does not use | Contaminants | Four element results against the dose calculation | A raw-material result copied into a finished-product claim | Label | Salt name, elemental iron, percentage of the reference intake | Salt mass declared as iron | Claims | Authorised wording and conditions, or no claim | A structure/function sentence written as a disease claim | Traceability | Code matches on certificate, drum label and retained sample | Certificate from a different lot The certificate itself is read on the COA page; the tests that separate the ferric salt from a ferrous one are on the identity page; ordering and documents are on the MOQ page. Market summaries are kept under United States and United Kingdom, and the specification is on the product page. ### 06 How we prove an iron pyrophosphate lot is the ferric salt URL: https://nutrition.rainwoodbio.com/products/minerals/iron-pyrophosphate/identity/ Reviewed: 2026-11-18 Identity is proved in four layers: iron by ICP-OES, the ferric valence, the pyrophosphate anion and its ratio to iron, and the grade properties the lot is sold against. None of the four is sufficient alone; a ferrous salt, an iron oxide or a diluted powder can each satisfy part of the specification. The batch COA confirms the layers for a lot, and an outside laboratory settles a disputed one. In one lineIron content says how much; only the valence, the pyrophosphate and their ratio say which salt it is. ## Four layers of evidence The identity stack · what each layer adds | Layer | Test | What it establishes | What it leaves open | Iron content | ICP-OES | The mass of iron in the powder | Which salt carries the iron | Valence | Ferrous/ferric speciation | Iron is present as Fe(III) | The anion | Anion and ratio | Hydrolysis, then IC or colorimetry | Pyrophosphate is present in the expected proportion | Whether the phase is crystalline | Solid state and grade | XRD; sieve; density | A crystalline ferric pyrophosphate hydrate in the declared grade | Amorphous surface species and minor phases The order matters. A supplier who reports only the first line has measured a quantity, not a material; a supplier who reports the first two has excluded ferrous salts but not an iron oxide. The anion and the solid state are what close the identification. ## The pyrophosphate-to-iron ratio The formula fixes the arithmetic. Fe₄(P₂O₇)₃ carries four iron atoms to three pyrophosphate groups, so the phosphorus-to-iron molar ratio is 6:4, or 1.5, and the pyrophosphate-to-iron mass ratio is about 2.34. If the iron result is 25.0%, the pyrophosphate implied by the formula is about 58%, not the 70% of the anhydrous salt, because the hydrate dilutes both sides. The measurement is indirect: pyrophosphate is hydrolysed to orthophosphate, and the phosphate is read by ion chromatography or a colorimetric method. Watch the basis. A result reported as P rather than P₂O₇ differs by a factor of about 2.8, and a lot compared on the wrong basis will look wrong when it is right, or right when it is not. A certificate should state which species the number describes. A lot that meets the iron window but misses the ratio is not the single salt. It may be a blend, a partly hydrolysed material or a different pyrophosphate. The ratio is the simplest cross-check in the stack, because it uses two results that a competent laboratory already has. ## What X-ray diffraction adds XRD reads the solid state. A crystalline ferric pyrophosphate hydrate gives a pattern that can be compared with a reference; iron oxide gives its own lines, and a ferrous salt gives another set. This is the layer that catches a blend of two crystalline materials even when the iron and phosphate figures have been balanced to look consistent. It has limits. Amorphous material, a surface coating and a minor phase below the detection limit do not appear, and a matching pattern does not quantify the hydrate. Ask for the detection limit together with the reference pattern used. XRD is strongest beside the ratio: a crystalline pattern plus a matched P:Fe ratio is a much stronger statement than either alone. ## The routes worth checking Adulteration routes and the test that shows them | Route | What it changes | Test that shows it | Ferrous salt: fumarate, sulfate, gluconate | Valence, colour; sulfur if sulfate | Speciation; XRD; sulfur by ICP | Iron oxide, Fe₂O₃ | Iron above the window; red-brown tint | XRD; colour; iron result | Dilution with calcium phosphate or a carrier | Iron and pyrophosphate both low; LOD up | Ratio; LOD; calcium or organic matter | Added orthophosphate | Phosphate high; pyrophosphate reaction weak | Hydrolysis and IC; ratio | Ferric sodium pyrophosphate | Sodium present; a different salt | Sodium by ICP; XRD The arithmetic catches most routes before an instrument does. Iron above 26% is not this hydrate; iron below 24% is dilution or another salt; a phosphate figure that does not follow the iron points to a second phosphate source. The exception is a blend built to land inside both windows, which is why the valence and the solid state belong in the specification and not only in a due-diligence file. ## Writing the specification - "Ferric pyrophosphate, Fe₄(P₂O₇)₃·xH₂O, CAS 10058-44-3; no ferrous salt and no iron oxide added." - "Iron 24.0–26.0% by ICP-OES; pyrophosphate identity conforms; P:Fe molar ratio in a window around the stoichiometric 1.5, for example 1.4–1.6." - "Iron present as Fe(III); ferrous iron not detected above the reporting limit, which is stated on the report." - "Loss on drying ≤5.0%; ≥95% through 200 mesh; bulk density 0.40–0.80 g/mL." - "XRD consistent with ferric pyrophosphate hydrate; no crystalline iron oxide above the stated detection limit." - "Heavy metals and microbiology as on the catalog sheet; each element reported separately." A specification written this way tells a laboratory what to prove and tells a supplier what will be checked. It also makes a counter-offer readable: a supplier who cannot meet the ratio line is offering a different material, whatever the iron figure says. ## Five questions for the supplier - Which iron salt is this, and what valence evidence covers this lot? - What are the iron and pyrophosphate results, the methods, and the ratio calculated from them? - Does an XRD report cover the crystalline phase and iron oxide, and what limit of detection is quoted? - Which hydrate is declared, and what is the loss-on-drying figure for this lot? - Is any ferrous salt, iron oxide or carrier present, and if the lot is blended, in what proportions? Five direct answers amount to a specification. The product page carries the catalog figures; the COA page maps each test to the certificate; the grade page deals with mesh and density; the fumarate comparison sets out the ferrous alternative. The methods are described in the ICP-OES and XRD notes, and the compliance file is on the compliance page. ### 02.1 Ferric pyrophosphate vs ferrous fumarate: iron content, oxidation and the label URL: https://nutrition.rainwoodbio.com/products/minerals/iron-pyrophosphate/grades/ferric-pyrophosphate-vs-ferrous-fumarate/ Reviewed: 2026-11-18 Ferric pyrophosphate carries 24.0–26.0% elemental iron; ferrous fumarate carries about 33% by formula, so a smaller mass of the fumarate delivers the same iron figure. The difference that matters is not the number but the oxidation state: the ferric salt is already oxidised and practically insoluble, while ferrous fumarate supplies iron in the ferrous state, which takes part in redox chemistry in a moist or acidic matrix. The label names the salt, and the two are separate entries on the EU list. In one lineFerrous fumarate carries more iron per gram; ferric pyrophosphate carries its iron already oxidised, and the label has to name which one is in the capsule. ## Two iron sources, two chemistries Both are iron salts used in supplements, and they have almost nothing else in common. One is a ferric pyrophosphate built on Fe(III) and a pyrophosphate anion; the other is a ferrous salt of fumaric acid. The names are not interchangeable in a specification, a purchase order or an ingredient list. Ferric pyrophosphate and ferrous fumarate side by side | Property | Ferric pyrophosphate | Ferrous fumarate | Formula | Fe₄(P₂O₇)₃·xH₂O | C₄H₂FeO₄ | CAS | 10058-44-3 | 141-01-5 | Iron valence | Fe(III) | Fe(II) | Iron content | 24.0–26.0% | About 32.9% by formula | Appearance | White to yellowish powder | Reddish orange to red-brown powder | Solubility in water | Practically insoluble | Sparingly soluble | Usual form | Micronized powder, 200 mesh | Powder, often directly compressible The colour difference is the fastest field check and the weakest one. It tells the two apart when the materials are pure, and it tells nothing when a blend or a coated particle is in the drum. ## Elemental iron and the mass on the scale The label declares elemental iron; the formulator weighs salt. The conversion is a division: material mass = target iron ÷ assay. A 25% ferric pyrophosphate needs 56 mg of powder to declare 14 mg of iron, while a 32.9% ferrous fumarate needs about 43 mg. The gap is roughly a quarter of the powder mass, and it grows with the dose. Salt mass needed for a declared iron figure | Target iron | Ferric pyrophosphate at 25.0% | Ferrous fumarate at 32.9% | 5 mg | 20 mg | 15.2 mg | 10 mg | 40 mg | 30.4 mg | 14 mg | 56 mg | 42.6 mg | 18 mg | 72 mg | 54.7 mg | 20 mg | 80 mg | 60.8 mg Use the assay on the certificate in front of you, not the midpoint of a catalogue window. A ferrous fumarate lot at 31% iron needs more powder than one at 33%, and the difference in a 20 mg dose is enough to change a capsule size. The same arithmetic works in reverse when a label is checked against the batch record. ## Oxidation, colour and mobile iron Ferrous iron oxidises. In a moist powder or an aqueous mix, Fe(II) converts to Fe(III), and the colour moves with it: a reddish powder darkens, while the iron assay may still read correctly because the element has not gone anywhere. Ferric pyrophosphate starts at Fe(III), so that particular drift is not available to it. Iron also catalyses the oxidation of lipids and some vitamins, and the rate depends on how mobile the iron is rather than on the total. A dissolved ferrous salt offers more mobile iron than an insoluble ferric particle. The ferric advantage is not absolute: ascorbic acid and some reducing sugars can bring Fe(III) back to Fe(II), and a low pH can dissolve part of the pyrophosphate. In a formula that combines the salt with ascorbic acid and water, the chemistry has to be tested rather than assumed. ## What each source asks of the matrix Ferrous fumarate is sparingly soluble, so it fits capsules and tablets, but its colour constrains pale products and the taste carries through in a chew or a stick pack. Ferric pyrophosphate is white to yellowish and practically insoluble, which suits pale powders, capsules and suspensions, but the particles settle and the mix needs a dispersion step. A tablet or a capsule is the easier home for either salt. A drink mix or a beverage is where the differences show: colour, sediment, mouthfeel, and the rate at which the iron changes state. Run the trial in the matrix, with the salt at its real share of the formula, rather than in water alone. ## Label wording that changes with the salt In the European Union, Annex II to Directive 2002/46/EC lists ferrous fumarate and ferric diphosphate (ferric pyrophosphate) as separate entries. The ingredient list must use the name of the form actually present, and the nutrition declaration gives elemental iron in mg and as a share of the 14 mg reference intake. The Annex II entry explains the list, and the compliance page sets out the wider file. In the United States, the Supplement Facts panel gives elemental iron against an 18 mg Daily Value, while the ingredient list carries the salt name. If a product contains both, both are named. A supplier's certificate that says "iron" does not settle which salt the label should carry, and swapping one for the other is a relabelling exercise as well as a formulation change. The percentage of the reference intake has to be recalculated from the elemental figure, never from the salt mass. ## When to choose which Choose ferric pyrophosphate when the formula needs a pale, low-solubility iron source and the process can handle a dispersion. Choose ferrous fumarate when the higher iron fraction and a compact tablet or capsule matter, and the colour and taste fit the product. The market's list, the label and the sensory trial belong in the same decision as the chemistry. This page makes no health claim for either salt. The choice is about chemistry, colour, process and label, and the two materials are not interchangeable gram for gram: the iron figure, the valence and the permitted name all change with the swap. The product page carries the ferric specification; the grade page covers mesh and density; the identity page shows how the ferric salt is proved; the stability page covers the matrix. The iron measurement is described in the ICP-OES note. ### 01 What the COA for zinc citrate actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-citrate/coa/ Reviewed: 2026-11-18 For a zinc citrate lot, the certificate reports appearance, citrate identification, zinc by complexometric EDTA, loss on drying, pH, particle size, bulk density, heavy metals and microbiology. Every line should carry a method, a release limit and a result for that lot; the ranges below are the catalogue specification, not a batch result. The hydrate and the assay basis belong on the certificate beside the zinc figure, because zinc citrate dihydrate and the anhydrous salt are different powders. In one lineA zinc percentage is a quantity, not an identity: the COA has to show the citrate test, the EDTA method, the drying basis and the limit the lot was released against. ## The certificate as a list of tests The document is easier to audit as a series of questions: what was measured, by which method, against which limit, and what did this lot return? The tables separate the chemistry and physical tests from the contaminant and microbiological panel. Identity, assay and physical tests · zinc citrate dihydrate | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | Citrate reaction and infrared spectrum | Conforms to reference | Zinc (Zn) | Complexometric EDTA titration | 31.0–32.5% on the dried basis | Loss on drying | Gravimetric, 105 °C | ≤6.0% | pH (5% suspension) | Potentiometry | 5.0–7.0 | Particle size | Sieve analysis | ≥95% through 40 mesh | Bulk density | Tapped cylinder | 0.50–0.85 g/mL Contaminant and microbiological limits · zinc citrate dihydrate | Parameter | Method | Release limit | Lead, arsenic, cadmium, mercury | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Aerobic plate count | Plate count | ≤1,000 cfu/g | Yeast and mould | Plate count | ≤100 cfu/g | E. coli and Salmonella | Absence tests | Absent ## What the zinc figure measures, and on what basis The zinc line comes from a titration. Disodium edetate binds zinc in a 1:1 complex, the sample is buffered to about pH 10, and an indicator such as Eriochrome Black T turns at the endpoint. The volume of titrant gives the total zinc in the portion that dissolved. EDTA is the laboratory reagent here, not an ingredient, and it does not distinguish zinc that came from the citrate from zinc supplied by an oxide or another salt. That is why the method and the basis have to sit next to the number. The catalogue range is 31.0–32.5% on the dried basis. A dried-basis result is corrected for the moisture measured by loss on drying; an as-is result includes that moisture. The dihydrate carries two water molecules in its lattice, about 5.9% of the formula, so most of the ≤6.0% drying limit is crystal water rather than free moisture. A lot near the top of the drying limit has little room left for water picked up in handling, and its as-is zinc figure will sit below its dried-basis figure. Citrate identity is a separate block. The reaction step establishes that the anion behaves as citrate, and the infrared spectrum is compared with a reference for the carboxylate and hydroxyl bands. Both are identification tests, not assays: a blend that contains citrate can pass the reaction while carrying a second zinc source. Read the identity result together with the zinc figure, the drying result and the pH, not as a substitute for them. The hydrate name belongs in the same block. Zinc citrate dihydrate is specified under CAS 5990-32-9; the anhydrous salt is a different solid with a different formula weight and more zinc per gram. A certificate that says only “zinc citrate” has left the reader to guess which one was released. ## Release limit versus the result for the lot The release limit is the acceptance boundary; the batch result is what the laboratory measured. Both belong on the certificate in separate columns, with the method named. A column that repeats the release range has not reported a measurement, and a certificate that reports only “conforms” for zinc cannot be trended against the next lot. This page does not reproduce a batch result: the batch COA confirms the numbers for a named drum. Some lines are attributes rather than ranges. Identification is pass or fail against a reference, and the microbiological absence tests are pass or fail against the method. The heavy-metal panel is different again: each element has its own limit, and the useful result includes the laboratory's limit of quantification. A “less than” figure without that limit says more about the report than about the powder. ## What moves between batches Zinc and loss on drying move with the reaction, the crystallisation and the drying step. A low as-is zinc result with a high drying result can describe a wetter lot of the same salt; a high zinc result with a weak citrate identification points the other way, toward a second zinc source. pH moves with residual acidity and with the balance of citrate species, and particle size and bulk density move with milling and sieving rather than with the chemistry. Colour and flow are qualitative and often more revealing than a single number. A grey or tan tint is a reason to check the drying record and the metal panel, because the assay can still pass. A trend across several lots, such as zinc drifting low or bulk density climbing, is more useful than one result near a limit. Ask for the batch record when the trend changes, not only for a fresh certificate. ## When to order an outside test An independent laboratory is worth using for a new source, a first shipment into a regulated market, a form claim that the supplier's certificate does not prove, or a disputed result. The panel should answer the open question rather than repeat the whole certificate: zinc by EDTA, citrate identity by reaction and infrared, water by loss on drying or Karl Fischer, the heavy-metal panel by ICP-MS, and X-ray diffraction where crystalline zinc oxide is the concern. Ask the laboratory to report its detection or quantification limit for every trace and phase test. A “not detected” line without a limit is evidence about the method, not about the sample. Chain of custody matters as well: the sample tested should be the retained sample, and its lot code should match the certificate and the drum. ## What to compare between suppliers Six lines make a fair comparison: the hydrate and CAS number; the zinc result and its basis; the citrate identity method and reference; loss on drying; particle size and bulk density; and the contaminant and microbiological panel. Two quotations that agree on zinc but differ on the other five are not describing the same powder. Traceability is the second layer. The lot code should be identical on the certificate, the pack label and the retained sample, and the certificate should name the manufacturing site, the date of release and the person who signed it. A certificate can be genuine and still describe a drum other than the one delivered. The zinc citrate product page carries the catalogue specification; the grade page explains the salt and hydrate choice; the identity page sets out the tests behind the citrate claim; the quality page describes the release record. The titration itself is described in the complexometric method note. ### 02 Zinc citrate or zinc gluconate: choosing a zinc salt URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-citrate/grades/ Reviewed: 2026-11-18 Zinc citrate and zinc gluconate are different salts, not two grades of one material. Zinc citrate dihydrate carries 31.0–32.5% elemental zinc on the dried basis and is only slightly soluble in water; zinc gluconate carries about 14.3% zinc on the anhydrous formula and dissolves freely. The choice is settled by the mass a label claim needs, the dosage form, the taste in the real matrix and the name the market allows on the label, not by the zinc figure alone. In one lineThe two salts differ in zinc per gram, solubility and taste; the dosage form and the label decide which one fits, not the number on the certificate. ## Two salts, two sets of numbers A zinc label declares the element, but the drum contains a salt. The anion is most of the mass, and it is the part that changes when the salt changes. Zinc citrate dihydrate has a formula weight of about 610 g/mol and delivers roughly 32% zinc; zinc gluconate has a formula weight of about 456 g/mol and delivers roughly 14% zinc on the anhydrous formula. The same 50 mg zinc claim therefore needs about 156 mg of the citrate or about 350 mg of the gluconate. That difference is only the beginning. The two salts also differ in water solubility, pH in suspension or solution, taste, particle size and flow. Each of those properties can decide a dosage form before the assay is considered. A formulator who compares only the zinc percentage is comparing the one number that is easiest to convert and hardest to use on its own. ## The options side by side Zinc salts and citrate variants · what changes in the drum | Salt or form | Zinc figure | Water solubility | Fits | Watch | Zinc citrate dihydrate, 40 mesh | 31.0–32.5% on the dried basis | Slightly soluble | Capsules, tablets, sticks, gummies | A 5% suspension is not a clear solution | Zinc citrate, milled to 80 mesh | Same as the 40 mesh line | Same as the 40 mesh line | Capsules, suspensions | Dust, flow and blend segregation | Zinc citrate, granulated | Same as the 40 mesh line | Same as the 40 mesh line | Tablets, sachets | Granulation aids must be declared | Zinc gluconate | About 14.3% theoretical; lot assay varies with hydrate | Freely soluble | Solutions, syrups, drinks, capsules | Roughly twice the mass per milligram of zinc The citrate rows are process variants of one salt, not different chemistry. Milling and granulation alter the particle-size distribution, the bulk density and the dust level; they do not change the zinc figure, and a certificate should not use them to explain one. The gluconate row is a different anion and a different specification. ## Solubility, taste and the powder in the room Solubility is the practical divider. Zinc citrate is slightly soluble, so a 5% suspension is a dispersion of particles, not a solution. It can be stirred into a stick pack or an opaque drink, but it will settle on standing, and a clear beverage at a meaningful zinc dose is not its natural format. Zinc gluconate dissolves freely, which is why it appears in syrups, solutions and clear drinks where the salt has to disappear. The pH follows the anion. A 5% zinc citrate suspension sits at pH 5.0–7.0, slightly acidic to neutral; a zinc gluconate solution is also close to neutral. Neither figure is a problem in itself, but the buffer capacity matters in a matrix that also contains an acidulant or an alkaline mineral. The citrate will resist a pH shift more than the gluconate at the same zinc concentration. Taste is a smaller difference than the formulator might expect. Both salts are mild compared with the highly soluble zinc salts, and both can turn metallic when the zinc concentration rises. Supplier panels often describe zinc citrate as neutral or faintly tart and zinc gluconate as mild and faint. Those descriptions are a starting point, not a specification: the sugar system, the acid, the flavour and the serving temperature decide what the consumer actually tastes. ## What the dosage form can carry In a capsule or a tablet, the citrate's higher zinc per gram is a direct advantage. A 10 mg zinc claim needs about 31 mg of the citrate or about 70 mg of the gluconate; a 50 mg claim needs about 156 mg or about 350 mg. At the top of that range the gluconate starts to compete with the excipients for space in a fixed capsule, while the citrate still leaves room. Tablets have the same arithmetic in a different shape: the gluconate needs more compression mass for the same claim. In a stick pack, the citrate disperses readily but may settle, so the pack has to be shaken and the suspension has to be stable enough for the shelf life. The gluconate dissolves and gives a clear drink, but it needs roughly twice the powder per milligram of zinc. In a gummy or a chew, the water activity and the pH matter more than the assay, and the citrate's buffer capacity can help or hinder the system. In a powder blend, bulk density and particle size decide whether the salt segregates from the other ingredients. ## How to write the specification - “Zinc citrate dihydrate, CAS 5990-32-9, 31.0–32.5% Zn by complexometric EDTA on the dried basis.” - “Citrate identity: reaction and infrared spectrum against a reference.” - “Loss on drying ≤6.0%; pH of 5% suspension 5.0–7.0.” - “≥95% through 40 mesh; bulk density 0.50–0.85 g/mL.” - “No added zinc oxide, zinc gluconate or citric acid; hydrate named on the certificate.” For zinc gluconate, replace the first line with the gluconate name, its hydrate state, its zinc range and the basis, and keep the identity, moisture, pH and physical lines that fit the dosage form. A specification that names only “zinc” has not described either salt, and a certificate that names only the element has not proved which one was shipped. ## What changes when you switch, and when not to A salt switch moves the fill weight, the taste, the dissolution or dispersion behaviour, the stability data and the label. It is a change control, not a substitution. The new salt needs its own specification, its own certificate review, a matrix trial at the real pH and process temperature, and a label that names the new ingredient correctly. A capsule that was qualified on the citrate cannot be switched to the gluconate at the same fill weight without recalculating the zinc per capsule. The switch is worth making when the current salt is the constraint: a clear drink that will not tolerate a suspension, a capsule that cannot hold the gluconate mass, or a taste trial that favours one anion in the actual matrix. It is not worth making because one quotation looks simpler, or because the zinc figure on one certificate is higher. If the current salt works, the label is approved and the stability file is complete, the burden sits on the switch. The citrate versus gluconate page works through the zinc arithmetic and the label; the COA page shows how each salt is reported; the compliance page covers the permitted-form lists. The catalogue line is on the zinc citrate product page. ### 02.1 Zinc citrate vs zinc gluconate: zinc content, taste and the label URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-citrate/grades/zinc-citrate-vs-gluconate/ Reviewed: 2026-11-18 Zinc citrate dihydrate and zinc gluconate deliver the same element from different molecules. The dihydrate is about 32% zinc by mass and only slightly soluble; zinc gluconate is about 14.3% on the anhydrous formula and freely soluble. For the same label claim the gluconate needs roughly twice the powder, and that gap shows up in capsule size, stick fill, taste and label arithmetic. In one lineZinc citrate carries about twice the zinc per gram of zinc gluconate, so the choice is a mass-and-matrix decision before it is a taste decision. ## Two molecules, one element Zinc citrate dihydrate is Zn3(C6H5O7)2·2H2O, CAS 5990-32-9, with a formula weight of about 610 g/mol. Three zinc atoms account for about 32% of that mass. Zinc gluconate is C12H22O14Zn, CAS 4468-02-4, with a formula weight of about 456 g/mol; one zinc atom is about 14.3% of the anhydrous formula. Commercial gluconate is often a hydrate, so the lot assay is the figure to use, not the formula alone. The two salts are separate entries on the EU and UK permitted-form lists for food supplements, and both are sold as dietary ingredients in the United States. They are not interchangeable words in an ingredient list: the anion is part of the ingredient's identity, and the label has to name the one in the drum. ## The zinc-to-powder arithmetic The conversion is a division. Take the elemental zinc the label claims and divide by the zinc fraction of the salt. The table uses 32.1% for the citrate dihydrate and 14.3% for the gluconate as planning figures; a real lot moves with its assay and hydrate, and the certificate is the number to use for a fill weight. Powder mass for a zinc label claim · formula arithmetic | Elemental zinc | Zinc citrate dihydrate at 32.1% | Zinc gluconate at 14.3% | Mass ratio | 10 mg | about 31 mg | about 70 mg | about 2.2 times | 15 mg | about 47 mg | about 105 mg | about 2.2 times | 25 mg | about 78 mg | about 175 mg | about 2.2 times | 50 mg | about 156 mg | about 350 mg | about 2.2 times The table is a planning tool, not a fill-weight release. Zinc citrate is specified here on a dried basis, so a certificate that reports the dried-basis figure needs the loss on drying applied before the as-is powder mass is calculated. The gluconate's hydrate state moves its zinc fraction in the same way. Both corrections are small compared with the difference between the salts, but they matter at the capsule or stick-pack fill stage. ## Taste in the matrix, not on the certificate Both salts are mild compared with the highly soluble zinc salts, and both can turn metallic as the zinc concentration rises. Supplier panels often describe zinc citrate as neutral or faintly tart and zinc gluconate as mild and faint. Those descriptions are subjective and matrix-dependent: the sugar system, the acid, the flavour and the serving temperature decide what the consumer tastes. The citrate anion brings a faint acid note that can read as tart in a low-sugar system. Zinc gluconate is described as mild and faint in supplier panels, but it brings more powder per milligram of zinc, and the larger mass can carry more of the mineral note into the mouth. Neither description is a specification. Trial both salts at the real zinc concentration and the real matrix before choosing on taste. ## What each salt fits In a capsule or a tablet, the citrate's higher zinc per gram is a direct advantage. A 10 mg zinc claim needs about 31 mg of the citrate or about 70 mg of the gluconate; at 50 mg the gap is about 156 mg against about 350 mg, which starts to compete with excipients in a fixed capsule. Tablets have the same arithmetic in a different shape: the gluconate needs more compression mass for the same claim. In a stick pack, the citrate disperses but may settle, so the pack has to be shaken and the suspension has to hold through the shelf life. The gluconate dissolves and gives a clear drink, but it needs roughly twice the powder per milligram of zinc. In a gummy or a chew, the water activity and pH matter more than the assay, and the citrate's buffer capacity can help or hinder the system. In a powder blend, bulk density and particle size decide whether the salt segregates from the other ingredients. ## What the label has to say In the European Union the ingredient list names the salt, and the nutrition declaration reports elemental zinc in milligrams and as a percentage of the 10 mg reference value. In the United States the Supplement Facts panel reports elemental zinc against an 11 mg Daily Value, and the ingredient list names the salt. In the United Kingdom the reference value is 10 mg. In all three markets the percentage is calculated on the element, not on the salt mass. That distinction is where the two salts diverge on the artwork. A product declaring 10 mg elemental zinc provides about 31 mg of zinc citrate or about 70 mg of zinc gluconate, and a label that quantifies the ingredient has to use the figure that matches the salt in the drum. If the label declares only elemental zinc, the ingredient list still has to name the salt, and a switch from one to the other is a new ingredient list rather than a synonym. ## When to choose which - Choose zinc citrate when capsule fill, tablet weight or stick mass is the constraint and a slight suspension is acceptable. - Choose zinc gluconate when a clear solution is required and the larger powder mass fits the format. - Choose neither on a taste description alone; trial both at the real zinc concentration and pH. - Run a switch as a change control: new specification, new fill weight, new stability data and new label. The grade page places both salts among the citrate variants, the COA page shows how each certificate reports the zinc figure, and the compliance page covers the permitted-form and labelling rules. The catalogue line for the citrate is on the zinc citrate product page. ### 03 Zinc citrate is stable dry; moisture and the matrix decide the rest URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-citrate/stability/ Reviewed: 2026-11-18 Zinc citrate dihydrate has no obvious degradation route at ambient temperature while it stays sealed in its liner. The two water molecules built into the crystal are about 5.9% of its mass, and the release limit is ≤6.0%. The narrow gap between those figures is the first thing to understand: a lot at 5.8% is largely showing its own crystal water, while a lot at 6.0% has almost no allowance left for water picked up from the air. In one lineThe dry salt keeps well; moisture after opening, the pH and mineral load of the matrix, and the pack decide the rest. ## The powder after the liner is opened Inside a sealed 25 kg fiber drum, with the food-grade liner intact, the salt can be held at ambient temperature. The risk starts at the first draw. An open liner lets the powder take up surface moisture, and the visible result is caking, slower flow and a bulk density that no longer matches the certificate; the zinc assay may stay inside its range the whole time. Close the liner after every draw and keep the drum in a dry room. Where the destination is humid, a desiccant in the outer pack is a sensible addition, and the packing specification should name it. Colour is a weaker signal: a tint after storage is a reason to check moisture and the metal panel, not an automatic rejection. ## In a dispersion and in the matrix A 5% dispersion is not a solution. Zinc citrate is only slightly soluble, so part of the powder remains undissolved and settles if the dispersion is left standing. The pH of that 5% suspension is 5.0–7.0. A stick pack or an opaque drink can carry the dispersion; a clear beverage at a meaningful zinc dose cannot. Acid moves the equilibrium. At pH 4 or below, citrate takes on protons, zinc is released from the salt, solubility rises and the taste becomes more tart. Alkaline conditions push the other way: zinc can form hydroxide and the matrix can cloud. Citrate complexation may hold some zinc in solution, so a bench trial at the target pH is more useful than a rule of thumb. Citrate also binds calcium and iron. A formula that contains those minerals competes for the same anion; calcium citrate is sparingly soluble and can haze a clear drink, while iron–citrate species can change colour. Heat speeds up the exchange and any browning from reducing sugars. ## What moves the result Stability factors · zinc citrate in storage and in formula | Factor | What changes | What to do | Water pickup | Loss on drying climbs, powder cakes, flow falls | Keep the liner closed; dry storage; desiccant if needed | Acidic matrix | Citrate protonates, more zinc dissolves, taste turns tart | Set the acid level; trial the taste | Alkaline matrix | Zinc hydroxide haze or sediment | Buffer the system; avoid high pH | Calcium or iron | Citrate competition, haze or colour shift | Trial the full mineral load | Heat | Faster exchange; browning with reducing sugars | Lower the process temperature | Pack | Moisture or odour transfer | Foil laminate for sticks; sealed liner for drums | Mesh | Fines, dust and settling rate | Match the mesh to the line ## The stability protocol A bulk study fills the commercial pack and holds it at 25 °C and 60% relative humidity, and at 40 °C and 75% relative humidity. Samples are pulled at 0, 2, 6, 12 and 24 months and tested for zinc, loss on drying, pH, appearance, particle size and microbiology. The 40 °C chamber is an acceleration tool, not a storage specification. The finished dosage form needs its own study. Capsules, tablets, sticks or gummies go into 30 °C and 65% relative humidity, and into 40 °C and 75% relative humidity, and are tested for zinc, moisture, colour, taste and, where relevant, dissolution or disintegration. The finished product can fail even when the bulk powder passes; the brand needs the dosage-form result. ## Formulation and packaging A capsule or tablet shields the powder; moisture and the excipient list are the remaining risks. A direct-compression blend needs a lubricant that contributes no water, and a hygroscopic excipient can pull moisture toward the citrate. A sealed blister or a tight high-density polyethylene pack with a desiccant is a sensible default; a granulated grade may flow better but can carry a binder that has to be declared. For a stick pack, the laminate is part of the formulation: begin with a heat-sealed foil structure that has a low moisture-vapour transmission rate, and regard a paper or clear construction as a retail choice that needs data behind it. A gummy or chew is governed by its sugar system, water activity and pH, and the flavour has to carry the citrate note. In a drink the pH and the preservative system outrank the grade, and a clear format may need a more soluble salt; the grade page compares the options. The powder should be packed in the 1 kg foil pouch or the 25 kg fiber drum described on the ordering page, and the liner should be closed after every draw. A pack that is left open between shifts is not the pack that was studied. ## Where the shelf life comes from The shelf life is a property of the pack and the matrix, not of the molecule. A technical data sheet should state the storage condition and whether the date is a retest period for bulk material or an expiry date for a consumer pack. If the study does not cover the pack, the matrix or the climate, the honest answer is a shorter date or a new study. One retest of an old lot is not a shelf-life extension. The COA page lists the parameters tracked over time, the quality page describes the record keeping, and the loss-on-drying entry explains how the moisture figure is obtained. The catalogue specification is on the zinc citrate product page. ### 04 Zinc citrate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-citrate/moq/ Reviewed: 2026-11-18 Zinc citrate can be ordered from a single kilogram: a foil pouch filled from a released lot, with that lot's certificate packed alongside. Production quantities move to the 25 kg fiber drum. Once the hydrate, quantity, pack and destination documents are fixed, dispatch is confirmed at one to seven days. In one lineOne kilogram qualifies the grade, the 25 kg drum runs production, and the quotation is built from the grade, quantity, destination and documents. ## Why the minimum is one kilogram One kilogram is a qualification quantity, not a stock position. It covers early formulation work, a short stability pilot and a small production batch, and it is drawn from a lot that has already been released. The point is to test a released lot of the production material, with a certificate that can be traced to the pouch. The minimum is not a volume cut-off. It is the smallest pack that can be labelled and documented as a lot in its own right. If an order exceeds one kilogram, the packer keeps the same lot where the lot size allows; if it does not, a new lot is produced and a new certificate is issued. State the hydrate in the first message. This catalogue line is zinc citrate dihydrate at 31.0–32.5% zinc on the dried basis. The anhydrous salt has a different zinc per gram and a different drying profile, and a trial on the wrong one will not qualify the label. ## Packaging Standard packs · zinc citrate dihydrate | Pack | Use | Notes | 1 kg foil pouch | First trials and bench work | Food-grade liner, heat-sealed; lot label on the pouch | 25 kg fiber drum | Routine production | Food-grade liner, sealed; tamper-evident closure | Pallet | Palletised dispatch | Stretch-wrapped; lot labels visible The liner belongs to the pack specification. A drum with an unsealed liner has been stored differently from the one that was studied, and the certificate does not record the difference. For a humid destination, ask for a desiccant and have the packing specification name it. Each pouch and drum should show the product and hydrate, lot, certificate reference, net weight and storage condition. Without a lot number, the pack cannot be linked to a certificate, retained sample or stability file. ## Lead time Indicative dispatch is one to seven days after the specification and order are confirmed. The clock starts when grade, quantity, pack and documents are agreed; an enquiry against an open specification is not an order. Four requests add time: a mill below the catalogue 40 mesh, a granulated grade, an outside test, and destination documents such as a certificate of origin or a translated label. Put any of them in the first message and the quotation can show the added days. ## What the quotation needs - The salt and hydrate, or the specification to be matched. - A first quantity and an annual estimate. - The dosage form: capsule, tablet, stick, gummy or drink. - The destination country and the documents it requires. - The mesh and bulk density the line can run. - The date the shipment must arrive. A competitor's certificate can start the conversation faster than a written specification, because it shows the methods and limits your quality team already uses. The reply can then be a counter-specification that states what can be matched and what cannot. Because packing, freight and documents follow the destination, commercial terms are set against the confirmed order. ## Samples A sample comes from a released lot and is accompanied by that lot's certificate; the quantity is agreed at enquiry. Without the certificate, the trial cannot be linked to a lot record or repeated. Ask for the grade that will ship: a 40 mesh dihydrate sample does not represent an 80 mesh milled powder, a granulated grade, or the anhydrous line. If the sample is meant to qualify a process variant, request that variant. If it is meant to qualify a supplier, ask for the certificate and retained-sample reference at the same time. Sample freight and documents are confirmed with the request. ## Payment and terms Payment terms, Incoterm and the document list are set in the order confirmation. They depend on the destination, the order size and whether the account is new, so they belong in the quotation rather than in a published rule. Any claim is assessed against the retained sample and the lot certificate. Tell us about a damaged pack or a mismatch as soon as it arrives, with photographs of the carton and lot label, before the material is used. The COA page lists the certificate fields; the grade page covers the salt and hydrate decision; the quality page explains the lot record and the retained sample. The product line is on the zinc citrate hub. ### 05 Where zinc citrate is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-citrate/compliance/ Reviewed: 2026-11-18 Zinc citrate sits on the permitted-form lists in the European Union and the United Kingdom, and it is sold as a dietary ingredient in the United States. Permission is only the first test. The finished product still has to meet contaminant limits, carry the supplement particulars and use only claim wording the market allows. In one linePermission, contaminant limits, label particulars and claim wording are four separate tests, and each market runs them on its own instruments. ## The four checks, and where they apply Permission comes from a list; purity is a ceiling on the finished supplement; labelling is a set of particulars; claims are a separate authorisation. A zinc citrate lot that meets the catalogue specification has cleared none of the four by itself. The certificate describes a powder, while the market regulates a capsule, tablet, stick or gummy, and the salt's share of the serving translates one into the other. The United Kingdom keeps a parallel list under the Food Supplements (England) Regulations 2003, as amended by the Nutrition (Amendment) (EU Exit) Regulations 2019; zinc citrate is on it. The GB contaminant limits, retained from Regulation (EC) No 1881/2006, and the GB claims register are separate from the EU's, and Northern Ireland follows the EU list. Check legislation.gov.uk before artwork is signed. ## European Union Directive 2002/46/EC lists the vitamin and mineral substances and forms that food supplements may use. Zinc citrate appears in Part B of Annex II among the permitted zinc forms. The entry is permission, not a purity standard, and it leaves the contaminant, labelling and claim rules untouched. Contaminants fall under Regulation (EU) 2023/915, which applies from 25 May 2023 and replaced Regulation (EC) No 1881/2006. For food supplements it sets lead at 3.0 mg/kg, cadmium at 1.0 mg/kg and mercury at 0.10 mg/kg on the product as sold. There is no harmonised EU maximum for arsenic in supplements, so a buyer must set one in the specification. Labelling follows Regulation (EU) No 1169/2011 and the supplement particulars in Directive 2002/46/EC: the words “food supplement”, the nutrient names, the amount per portion, the percentage of the nutrient reference value, a warning not to exceed the stated daily dose, a warning to keep out of reach of children and a statement that the product is not a substitute for a varied diet. The zinc reference value is 10 mg, so the percentage is calculated against that figure. Claims are authorised in Regulation (EU) No 432/2012; a source-of-zinc claim depends on 15% of the 10 mg reference value in the daily portion, which is 1.5 mg of elemental zinc. Notification procedures and national maximum levels still differ between Member States. Check the current text before the artwork is signed. ## United States As of this review, zinc citrate is marketed in the United States as a dietary ingredient under DSHEA. The seller must show why the form is a lawful dietary ingredient: an NDI notification, a GRAS conclusion, or pre-15 October 1994 marketing evidence. The file should name the basis and hold the evidence. There is no premarket approval; the other rules still apply. The Supplement Facts panel is set by 21 CFR 101.36. It states the amount of elemental zinc per serving and the percentage of the Daily Value, which is 11 mg for adults and children four years and older. The ingredient list names the salt, so “zinc citrate” and “zinc gluconate” are not interchangeable words on a US label even when the elemental zinc figure is the same. A structure/function statement has to be truthful, substantiated and clear, with the DSHEA disclaimer required by 21 CFR 101.93. The marketer must notify the FDA within 30 days of first marketing a product with such a claim. A disease-related claim is not permitted. Current good manufacturing practice (21 CFR 111) also requires identity testing. There is no federal maximum level for lead in dietary supplements; California's Proposition 65 supplies a maximum allowable dose level of 0.5 µg/day and a no-significant-risk level of 15 µg/day, calculated from the daily dose. ## The contaminant table Contaminant ceilings for supplements · EU, US and UK at this review | Element | EU | US | UK | Lead | 3.0 mg/kg in the supplement as sold | No federal supplement limit; state rules apply | 3.0 mg/kg retained limit | Cadmium | 1.0 mg/kg | No federal supplement limit | 1.0 mg/kg retained limit | Mercury | 0.10 mg/kg | No federal supplement limit | 0.10 mg/kg retained limit | Arsenic | No harmonised EU limit | No federal supplement limit | No harmonised GB limit The catalogue specification for zinc citrate dihydrate is Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg. For lead, cadmium and mercury those figures match the EU finished-product ceilings, but that does not make them finished-product limits. The raw material is diluted by the rest of the formula, so the calculation is the result times the salt's share of the serving, compared with the finished-product limit. A capsule has room; a stick pack that is mostly citrate has little. Set the raw-material ceiling from the finished dose. ## The claims boundary The European Union authorises zinc claims in Regulation (EU) No 432/2012. In the United States, a structure/function statement belongs to the brand and has to be truthful, substantiated and followed by the DSHEA disclaimer. No market allows a disease-related claim. This page does not reproduce claim wording, and nothing on this site is a health claim for zinc citrate: these pages publish specification, method and regulatory facts. A formulation statement such as “zinc citrate is used in capsules” describes the material, not a claim. The brand that prints a claim owns the wording and the substantiation file. ## The document pack - Lot certificate covering zinc, citrate identity, moisture and the contaminant panel, with method, limit and result. - Specification and technical data sheet naming zinc citrate dihydrate and its assay basis. - Safety data sheet, allergen statement, GMO statement and origin record. - Contaminant report against the destination limits, including an arsenic limit where the buyer sets one. - Label artwork showing elemental zinc per portion and the % NRV or % Daily Value. - Claim file with the authorised wording or the US structure/function file, plus the US dietary-ingredient basis. ## Before the first order - Is zinc citrate a permitted zinc form in the destination market, and is the hydrate named in the specification? - Do the contaminant results still sit under the finished-product limit at the real dose? - Does the label state elemental zinc per portion and the correct percentage of the 10 mg EU/UK or 11 mg US reference value? - Is every claim one the market authorises, in the exact wording, with the supporting file? - Does the pack include the US dietary-ingredient basis and the current GB position? - Does the certificate name the methods, the assay basis and the laboratory's quantification limits? The COA page shows where the numbers sit on the certificate, the identity page covers the tests that prove the salt, and the grade page explains the hydrate and salt choice. The market summaries are in the EU, US and UK notes, and the catalogue line is on the zinc citrate product page. ### 06 How we prove a zinc citrate lot is the citrate URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-citrate/identity/ Reviewed: 2026-11-18 A zinc citrate lot is the citrate only when four things agree: the zinc assay, the citrate identity, the 3:2 zinc-to-citrate stoichiometry with two waters of crystallisation, and a disclosure that nothing else is in the drum. The EDTA titration answers the first; the citrate reaction and infrared spectrum answer the second; loss on drying and the ratio close the third; the specification and the supplier's answers close the fourth. In one lineA zinc assay is not an identity: the citrate test, the 3:2 ratio, the hydrate water and the disclosure must all point to one lot. ## The four identity questions Layer one is the metal. EDTA titration at about pH 10 measures total zinc in the portion that dissolved, with Eriochrome Black T as the usual indicator; it is a quantity, not an identity. Layer two is the anion. A citrate reaction gives a positive response for citrate, and an infrared spectrum is compared with a reference for the carboxylate and hydroxyl bands. Neither is a purity assay: a blend can pass both while carrying a second zinc source. Layer three is the stoichiometry and the water. Three divalent zinc ions balance two trivalent citrate ions, and the dihydrate carries two waters in the lattice; the ratio and the loss on drying tie the metal to the anion and the solid to its hydrate. Layer four is disclosure. The drum should hold the citrate salt and nothing the paperwork omits: no zinc oxide to lift the assay, no zinc gluconate to change solubility, no citric acid to lift the citrate signal, and no carrier that dilutes both. One result can close one layer and leave the others open. ## The 3:2 ratio and the water Zinc citrate is Zn3(C6H5O7)2·2H2O, about 610 g/mol, roughly 32% zinc, 62% citrate and 5.9% water by mass. The 3:2 ratio is fixed by charge balance: zinc is divalent, citrate is trivalent, and a different ratio needs another ion or a different anion. If a certificate reports a quantitative citrate result, convert both to moles and check for three zinc to two citrate. The standard release panel does not include that assay; identity is by reaction and infrared, so the ratio is an extra test for a disputed lot or a new source. High citrate against zinc points to added citric acid; high zinc against citrate points to a second zinc source. Read both on the same basis. Two waters are about 5.9% of the dihydrate, and the loss-on-drying limit is ≤6.0%. That is a tight ceiling, and a lot near it has little room for surface moisture. The anhydrous salt has no lattice water, a lower loss on drying and more zinc per gram. Karl Fischer is the direct water test when the hydrate is disputed. ## XRD, IR and the phase question X-ray diffraction identifies crystalline phases. Here it detects crystalline zinc oxide and checks the hydrate phase against the declaration. The result depends on the detection limit, so a report that says “no crystalline zinc oxide detected” without a limit does not answer the question. Infrared spectroscopy works at the bond level. Carboxylate bands, the hydroxyl region and the water band form a fingerprint against a reference. It is fast and not quantitative: a blend can show citrate features while the drum also holds an oxide. XRD and IR are complementary, and neither replaces the assay or the moisture result. XRD is not on the standard release panel. Order it for a suspected second zinc source, a new supplier, or a form claim the certificate does not prove, and ask for the detection limit and the sample preparation. ## The routes worth testing Adulteration and substitution routes · what moves and what detects them | Route | What moves | Test that exposes it | Zinc oxide addition | Zinc rises, citrate share falls, pH moves alkaline | XRD for crystalline oxide; citrate ratio; pH | Zinc gluconate substitution or blend | Zinc falls, solubility and taste change | Citrate reaction and IR; quantitative citrate | Citric acid addition | Citrate rises against zinc, pH falls | Citrate assay; pH; ratio calculation | Anhydrous sold as dihydrate | Zinc per gram rises, loss on drying falls | Loss on drying or Karl Fischer; hydrate declaration Zinc oxide is the most direct route because it carries about 80% zinc. A small addition lifts the assay and dilutes the citrate, and the powder can still look white and flow. The zinc figure alone will not catch it; the ratio, the pH and an XRD screen will. Zinc gluconate works the other way: at about 14% zinc it lowers the assay, so it appears as a blend or a mislabelled lot. It changes solubility and taste, and citrate identity separates it from the citrate salt. Citric acid is the opposite of an extender: it raises citrate while lowering zinc and pH. A citrate result high against zinc, with a pH below the 5.0–7.0 range, is the signature. A hydrate switch is not adulteration but a mislabelling risk: the anhydrous salt carries more zinc and a lower loss on drying, so a certificate that reports either without naming the hydrate leaves the buyer guessing. ## How to write the specification - “Zinc citrate dihydrate, tri-zinc dicitrate, CAS 5990-32-9; hydrate named on the certificate.” - “Zinc 31.0–32.5% by complexometric EDTA on the dried basis; basis stated on the certificate.” - “Citrate identity by reaction and infrared spectrum against a named reference.” - “Loss on drying ≤6.0%; pH of 5% suspension 5.0–7.0.” - “≥95% through 40 mesh; bulk density 0.50–0.85 g/mL.” - “No added zinc oxide, zinc gluconate or citric acid; no undeclared carrier.” The prohibitions carry as much weight as the positive limits. A zinc range alone does not exclude a second zinc source, and no supplier can be held to a restriction the specification never states. The hydrate line follows the same rule: “zinc citrate” alone describes a family, not a drum. ## Five questions for a supplier - Which hydrate is this lot, and which CAS number is on the certificate? - What zinc result and basis belong to this lot, and what citrate identity method and reference were used? - What is the loss on drying or Karl Fischer water, and does it match the two waters of the dihydrate? - Is the lot a single salt, or a blend containing oxide, gluconate, citric acid or a carrier? - Can you supply an XRD screen for crystalline zinc oxide, a quantitative citrate result, and the retained sample? Five specific answers amount to a material you can write into a specification. One who answers only the zinc figure is quoting a number. The COA page shows where those answers appear on the certificate; the grade page covers the hydrate and salt choice; the XRD and FTIR notes describe the methods; the catalogue line is on the zinc citrate hub. ### 01 What the COA for calcium bisglycinate actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-bisglycinate/coa/ Reviewed: 2026-11-18 The certificate for a calcium bisglycinate lot reports appearance, calcium by complexometric EDTA, glycine identification by infrared spectrum and reaction, loss on drying, pH, particle size, bulk density, the heavy-metal panel and microbiology. Each line should name the test, the method and the release limit used for that lot. The ranges below are the catalog specification; the batch COA reports what a particular pouch or drum actually contains. A calcium result near 21% is not enough on its own, because several calcium salts report a similar figure. In one lineCalcium at about 21% is where the chelate and the citrate meet, so the certificate has to prove the ligand as well as the element. ## The certificate as a test report A certificate becomes useful when it can be read line by line. For each parameter the buyer needs three things: the measurement, the method behind it, and the acceptance boundary used at release. Identity, assay and moisture · calcium bisglycinate | Item | Method | Acceptance range | Appearance | Visual | White to off-white, free-flowing powder | Calcium (Ca) | Complexometric EDTA titration | 18.5–23.0% | Identification | Infrared spectrum and glycine reaction | Conforms to reference | Loss on drying | Gravimetric | ≤5.0% | pH (5% suspension) | Potentiometry | 6.0–8.0 Physical, contaminant and micro limits | Item | Method | Acceptance range | Particle size | Sieve analysis | ≥95% through 80 mesh | Bulk density | Tapped cylinder | 0.50–0.80 g/mL | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent ## What the calcium and moisture figures measure Calcium is reported as the element, not as the chelate. The anhydrous formula C4H8CaN2O4 has a formula mass of 188.20, and a 1:2 calcium–glycine chelate carries 21.3% calcium and 79.8% glycine. The catalog window of 18.5–23.0% brackets that figure without pinning the lot to it: water, residual glycine and the reaction conditions all move the calcium result. A number inside the window is a calcium result, not a purity figure and not a ratio. Loss on drying measures water and volatiles, and the ≤5.0% limit is a ceiling rather than a target. A lot at 4.8% and a lot at 0.6% both pass, but they do not have the same solids content, and the calcium figure as sold moves with that water. The certificate should say that calcium is reported on the material as sold. A calcium result recalculated to a dried basis is higher, and the two bases cannot be compared without the moisture result beside them. Identification is a presence test: the infrared spectrum and the glycine reaction show that glycine is in the sample, not that it is bound at a 1:2 ratio. The ratio is a separate calculation from calcium and a quantitative glycine result, and it needs a free-glycine figure to be read properly. A certificate that shows glycine only by reaction leaves the chelate identity open. ## The gate and the measured result A release limit marks the boundary a lot had to meet. The batch result is what the laboratory measured. The two sit in separate columns, with the method beside each number. A result column that repeats the specification range has not reported a measurement; it has copied the acceptance range. Not every line has a numeric range. Appearance, identification and the absence tests are pass or fail lines, and “conforms” is only a result when the reference standard and the method are named. The calcium, loss on drying and pH lines are the ones to read first. The heavy-metal and microbiological limits are catalog ceilings. The batch COA reports the measured values, and the buyer compares those values with the limit in the destination market as well as with the specification. A lot can meet the catalog ceiling and still fail a customer's tighter arsenic limit, so the purchase specification should carry the tighter figure when one applies. ## What moves between batches Calcium and loss on drying move with the reaction, the washing step and the drying step; pH moves with residual liquor; particle size and bulk density move with milling and granulation. A granulated grade and a milled grade can share a calcium result and behave differently on a capsule filler or a tablet press. Colour and flow are less quantitative and often more revealing. A cream or tan tint can point to a hot drying step or a trace of iron while the calcium assay still passes; ask for the batch record instead of rejecting on colour. A drift across successive lots — calcium moving to one edge, loss on drying climbing — says more than a single result near a limit. ## When to order an outside test Order an independent test when the source is new, when a lot is the first into a regulated market, when a chelate claim is not proved by the supplier's certificate, or when a result is disputed. The useful panel is narrower than a full repeat: calcium by EDTA, glycine by HPLC with a free-glycine figure, FTIR for coordination, XRD for crystalline calcium salts and free glycine, and ICP-MS for the heavy-metal panel, all on one submitted sample. Ask the laboratory to state its detection limit for the XRD screen. A “not detected” line without a limit describes the method's sensitivity, not the sample. The glycine assay should identify the column and detector and state its basis, not just give a percentage. When a result is contested, the referee should receive the retained sample, the supplier's certificate and the specification, and the chain of custody should connect the sample tested to the sample retained. ## What to compare between suppliers Six lines make a supplier comparison useful: the form and mesh; the calcium result with its method and basis; the glycine identity and, where available, the glycine and free-glycine results; loss on drying; pH; and the contaminant panel. Two quotations that agree on calcium but diverge on the other five are not describing the same powder. The second layer is lot traceability. The certificate, the pack and the retained sample should all carry one lot code, and the certificate should say who manufactured the lot and which calcium source and drying step were used. A correct certificate can still belong to a different drum; the lot code rules that out. The catalog specification is published on the calcium bisglycinate product page. The choice between the bisglycinate and the citrate is set out on the salt comparison page, and the tests that separate the chelate from a blend are on the identity page. The titration is described in the complexometric method note, and the release process is described on the quality page. ### 02 Calcium bisglycinate or citrate: choosing a calcium salt URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-bisglycinate/grades/ Reviewed: 2026-11-18 Calcium bisglycinate and calcium citrate tetrahydrate carry almost the same amount of elemental calcium, about 21%, so a 200 mg label claim needs a similar mass of either salt. The choice is not a calcium-load decision: it turns on the ingredient name on the label, the ligand, the water the powder brings, the dosage form and the file the buyer has to hold. This page compares the two salts and sets out what changes when a formula switches from one to the other. In one lineAt about 21% calcium each, the two salts need almost the same fill weight; what changes is the ingredient name, the ligand and the evidence behind it. ## Why the comparison starts with the label The question usually comes from a citrate formula and a request to drop in the bisglycinate. The calcium figure says it nearly can. The rest of the specification says it cannot, because the declared ingredient, the identity test, the loss on drying and the bulk density all change. Both salts are used in capsules, tablets, powder sticks and gummies. Neither is the high-calcium option: calcium carbonate carries about 40% calcium, and a formula that needs the smallest possible dose mass is a different discussion. Between the bisglycinate and the citrate, the calcium difference is small enough that the label and the process should decide. ## The two salts side by side Calcium bisglycinate and calcium citrate tetrahydrate compared | Item | Calcium bisglycinate | Calcium citrate tetrahydrate | Formula | C4H8CaN2O4 | C12H10Ca3O14·4H2O | CAS number | 136-26-5 | 813-94-5 | Calcium, catalog range | 18.5–23.0% (EDTA) | 21.0–22.0% (EDTA) | Calcium, stoichiometric | 21.3% | 21.1% | Salt mass for 200 mg calcium | 870–1,081 mg | 909–952 mg | Loss on drying | ≤5.0% | ≤13.0% | Bulk density | 0.50–0.80 g/mL | 0.60–0.95 g/mL | Identity test | Infrared spectrum and glycine reaction | Citrate reaction and infrared spectrum The calcium figures are catalog ranges; the batch COA confirms the result for a particular lot. The salt mass column is arithmetic from the ends of each range. A citrate lot at 22.0% needs 909 mg for a 200 mg claim, while a bisglycinate lot at 18.5% needs 1,081 mg, about 19% more powder for the same label figure. ## Powder, water and flow Both catalog grades are 80-mesh powders with granulated and milled options. The bisglycinate bulk density is 0.50–0.80 g/mL; the citrate is 0.60–0.95 g/mL. The citrate therefore tends to fill a smaller volume for the same mass, which can matter when a capsule size or a stick-pack volume is already fixed. Density varies with the lot and the grade, so confirm it on the batch COA. The water load is the larger difference. Calcium citrate tetrahydrate carries about 12.6% water in the crystal, which is why its loss-on-drying limit is 13.0%. The bisglycinate limit is 5.0%. In a low-moisture tablet or a gummy, that difference changes the water activity of the matrix and the drying step, even though both powders are sold as dry solids. Solubility is similar in direction: both are sparingly soluble in water, and a 5% bisglycinate suspension is close to neutral at pH 6.0–8.0. A drink mix made with either salt is a dispersion rather than a clear solution, and sediment on standing is a physical observation, not an assay failure. ## What the dosage form needs At about 21% calcium, 200 mg of calcium needs roughly 0.9–1.0 g of either salt. A 500 mg capsule fill of the salt carries about 105 mg calcium, so a 200 mg claim means two capsules; a 1,000 mg tablet fill carries about 210 mg. A 500 mg stick claim needs about 2.4 g of salt, which is a formula and package decision before it is a salt decision. Capsules care about bulk density and flow; tablets care about compressibility, granulation and tooling; sticks care about dispersion and sedimentation; gummies care about water activity, pH and heat. The salt choice should follow the dosage form, not the other way round. A granulated grade can solve a flow problem that a milled grade creates, and both salts offer a granulated option. ## How to write the specification after a switch When a formula switches, the specification has to switch with it. Name the salt and the CAS number; state the calcium range and the EDTA method; keep the identity test that belongs to the salt; carry loss on drying, mesh and bulk density; and add the contaminant and microbiological limits that the market requires. - “Calcium bisglycinate, C4H8CaN2O4, CAS 136-26-5; calcium 18.5–23.0% by complexometric EDTA.” - “Identification by infrared spectrum and glycine reaction, conforms to reference.” - “Loss on drying ≤5.0%; pH 6.0–8.0 (5% suspension); ≥95% through 80 mesh; bulk density 0.50–0.80 g/mL.” - “Calcium citrate tetrahydrate, C12H10Ca3O14·4H2O, CAS 813-94-5; calcium 21.0–22.0% by complexometric EDTA.” - “Citrate identification by reaction and infrared spectrum, conforms to reference; loss on drying ≤13.0%.” A label that says calcium citrate needs a citrate identity result; a bisglycinate certificate cannot support it. The reverse is also true: a citrate certificate does not show glycine, so it cannot support a chelate label. The declared name and the certificate have to match. ## When the switch is not the answer Stay with the citrate when the existing label, supplier and tablet tooling are built around it and the only argument for switching is the calcium figure. At about 21% each, the switch gains little in fill weight, and it requires a new specification, a new identity test and a new label. Choose the bisglycinate when the label needs the chelate and the file can support the glycine identity and the calcium-to-glycine ratio. Choose neither when the real need is the highest calcium load per gram; that is the carbonate comparison, not this one. The switch changes the certificate, the specification and the label, and those three changes should be planned together. The catalog specification is published on the calcium bisglycinate product page. The certificate lines are read on the COA page, the fill-weight arithmetic is on the bisglycinate versus citrate page, and the identity tests are on the identity page. The citrate specification is on the calcium citrate product page. ### 02.1 Calcium bisglycinate vs citrate: calcium content, fill weight and the label URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-bisglycinate/grades/bisglycinate-vs-citrate/ Reviewed: 2026-11-18 Calcium bisglycinate and calcium citrate tetrahydrate both carry about 21% elemental calcium, so a 200 mg label claim needs roughly 0.9–1.0 g of either salt. The fill weight is therefore not the deciding difference. The declared ingredient, the ligand, the water the powder brings and the identity file are what change when a formula switches. The conversion still matters, because the bisglycinate catalog range is wider and the batch COA's calcium result sets the actual fill. In one lineAt about 21% calcium, the two salts need nearly the same mass for the same claim; the label and the file, not the fill weight, decide the switch. ## Two salts at the same calcium figure Calcium bisglycinate and calcium citrate tetrahydrate, compared | Item | Calcium bisglycinate | Calcium citrate tetrahydrate | Formula | C4H8CaN2O4 | C12H10Ca3O14·4H2O | CAS number | 136-26-5 | 813-94-5 | Calcium, catalog range | 18.5–23.0% (EDTA) | 21.0–22.0% (EDTA) | Calcium, stoichiometric | 21.3% | 21.1% | Water of crystallisation | None in the formula | About 12.6% | Salt mass for 200 mg calcium | 870–1,081 mg | 909–952 mg | Label name | Calcium bisglycinate | Calcium citrate | Identity test | Infrared spectrum and glycine reaction | Citrate reaction and infrared spectrum ## The calcium-to-salt conversion The arithmetic is a division: salt mass = calcium claim ÷ calcium fraction. For 200 mg calcium, the bisglycinate at its 21.3% stoichiometric figure needs 939 mg, and the citrate tetrahydrate at 21.1% needs 948 mg. The two are within 1% of each other, which is why a switch does not resize the capsule on its own. The catalog ranges move the figure more than the choice of salt does. The bisglycinate range of 18.5–23.0% gives 870–1,081 mg for a 200 mg claim, a spread of about 24%. The citrate range of 21.0–22.0% gives 909–952 mg, a spread of about 5%. Use the batch COA's calcium result for the fill calculation, not the midpoint of the catalog range, and confirm the finished-product assay after compression or encapsulation. At a 500 mg claim the masses are 2.17–2.70 g of bisglycinate or 2.27–2.38 g of citrate. That is a stick-pack or a tablet-weight decision, and it is the point at which the density difference starts to matter as much as the mass. ## What the fill has to hold A 500 mg capsule fill of the salt carries about 105 mg calcium at 21%, so a 200 mg claim needs two capsules and a 500 mg claim is not a single capsule. A 1,000 mg tablet fill carries about 210 mg calcium, so a 200 mg claim fits one tablet and a 500 mg claim needs two or three, before the excipients are counted. The salt mass is only one term in the fill; the excipient load and the tooling set the rest. Bulk density separates the two powders in the package. The bisglycinate catalog density is 0.50–0.80 g/mL and the citrate is 0.60–0.95 g/mL, so the citrate tends to occupy less volume for the same mass. A stick pack or a capsule that was sized for one powder may not fit the other at the same fill weight, even though the calcium claim is unchanged. Confirm the density on the lot and trial the fill before the package is ordered. The water load is the other fill difference. Calcium citrate tetrahydrate carries about 12.6% water in the crystal, which is why its loss-on-drying limit is 13.0%; the bisglycinate limit is 5.0%. In a gummy or a low-moisture tablet, that water changes the matrix and the drying step, and it is a reason to re-run the stability work after a switch. ## The label and the calcium declaration The declared ingredient is the first thing that changes. The EU list names calcium bisglycinate and calcium citrate; the label has to use the listed name, and the certificate has to show the identity test that belongs to that name. A calcium citrate certificate cannot support a bisglycinate label, and a bisglycinate certificate cannot support a citrate label, even when the calcium figures are the same. The calcium declaration is arithmetic against the reference value. In the EU and the UK the calcium nutrient reference value is 800 mg, and the source-of condition for a calcium claim is 120 mg in the daily portion. In the US the Daily Value is 1,300 mg. The percentage changes with the salt only through the amount of calcium in the portion, not through the form; a 200 mg portion is 25% of the EU reference value and about 15% of the US Daily Value, whichever salt supplies it. ## The rules that do not change Both salts are permitted calcium sources for food supplements in the EU and Great Britain, and both can be sold as dietary ingredients in the US. The permission is form-specific: the form on the label has to be the form on the list or the form supported by the US ingredient file. A switch from citrate to bisglycinate is a change of ingredient, not a change of grade, and the file has to be rebuilt around the new identity test. The contaminant limits do not change with the salt. Lead, cadmium and mercury are limited in the finished supplement, and the ingredient's contribution is calculated from the dose. What changes is the identity file, the loss-on-drying limit and the specification lines that the buyer has to hold. ## When to choose which Choose the bisglycinate when the label needs the chelate, the formula is built around the glycine salt, or the buyer's specification calls for the calcium-to-glycine ratio. Choose the citrate when the label, the supplier and the tooling are already citrate and the calcium figure is the only argument for moving; at about 21% each, the move gains little in mass and requires a new specification, a new identity test and a new label. Choose neither when the goal is the highest calcium load per gram. Calcium carbonate carries about 40% calcium and is the high-load comparison; the citrate versus carbonate page sets out that arithmetic. And if the only goal is a chelate claim, the citrate cannot carry it; the form has to match the claim. The catalog specification is published on the calcium bisglycinate product page. The two salts are compared at specification level on the salt comparison page, the certificate lines are read on the COA page, and the identity tests are on the identity page. The citrate specification is on the calcium citrate product page. ### 03 Calcium bisglycinate is stable dry; moisture and the matrix decide the rest URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-bisglycinate/stability/ Reviewed: 2026-11-18 A sealed pack of calcium bisglycinate holds its calcium figure, its mesh and its flow for the shelf life the pack is given; the dry powder is not the fragile part. Moisture pickup, a wet or acidic matrix, heat and a reducing sugar are what move the material, and the packaging decides how much of each the powder meets. Any shelf-life figure has to come from a study on the packed article, not from the name of the salt. In one lineThe dry powder is stable in a sealed pack; moisture, an acidic matrix and heat are what change the lot, and the pack decides how much it meets. ## The dry powder and the open pack The catalog loss on drying is ≤5.0%, and the powder is sold free-flowing at 80 mesh. The first change in an open pack is moisture pickup: the particles take water from the air, the surface becomes sticky, and the powder cakes. The loss-on-drying result climbs with it, and a lot that was free-flowing at release can fail to feed a dosator or a sachet line without any change in the calcium assay. The salt is sparingly soluble, so water does not simply dissolve it; the water sits on the particle surface and in the pore space, which is enough to bridge particles and set a cake. Keep the pack closed, keep the store cool and dry, and regard a part-used pouch as the exposed unit. A desiccant is not a substitute for closing the pack, and a drum that is opened on the factory floor is exposed for as long as the lid is off. ## Suspension, pH and the acidic matrix A 5% suspension sits at pH 6.0–8.0, close to neutral. The salt is sparingly soluble, so the suspension is a dispersion: it will settle, and redispersion is a physical test that belongs in the formula work. A sediment that redisperses is a process issue; a sediment that sets hard is a stability issue. An acidic drink moves the matrix outside the pH window the salt is specified in. The glycine ligand is protonated as the pH falls, and the fraction of calcium held as the chelate changes; a calcium assay on the finished drink can still pass while the form on the label is no longer the form in the bottle. If the claim depends on the chelate, the stability protocol should follow the form as well as the element. High water activity adds the usual moisture and microbiological risks on top. ## The factors that move the material What moves calcium bisglycinate in storage and in formula | Factor | What changes | What to control or test | Moisture and water activity | Caking, loss-on-drying rise, flow loss | Keep the pack closed; control room humidity; test loss on drying | pH | An acidic matrix shifts the ligand equilibrium | Bracket the finished pH; test calcium and the form | Heat | Drying and browning; colour drift | Keep the process inside the validated temperature; test colour | Reducing sugars | Browning with glycine in a warm, moist matrix | Screen the matrix; test colour and loss on drying | Compression | Hardness, density and flow change | Granulate; check tooling and fill weight | Packaging | Moisture and light barrier | Foil pouch or fiber drum, closed; check the pack at each stage The table is a starting list, not a universal one. A capsule, a tablet, a stick and a gummy expose the same powder to different stresses, and each one deserves its own trial. The order of importance changes with the matrix: moisture dominates a stick, compression dominates a tablet, and heat and water activity dominate a gummy. ## A stability protocol for the packed article Write the protocol around the pack that will be sold: the 1 kg pouch, the 25 kg drum, the stick, the tablet or the gummy. Store the same lot in the same pack at 25 °C/60% RH for the long term, 30 °C/65% RH as an intermediate condition and 40 °C/75% RH for the accelerated arm, and test at 0, 3, 6, 12 and 24 months. Test the catalog lines — calcium, loss on drying, pH, appearance, mesh, bulk density and microbiology — and add the form lines (infrared spectrum, glycine and free glycine, ratio) where the label depends on the chelate. For a dosage form, add hardness, disintegration, dispersion and colour. Keep a retained sample from the same lot, and record the pack, the condition and the orientation. A 24-month shelf life needs 24 months of real-time data or a justified extrapolation. Accelerated data supports the claim; it does not replace the real-time arm on its own. If the product ships through a hot climate, add a condition that reflects the route rather than relying only on the standard cabinet. ## What the matrix does The matrix, not the salt, is usually what limits the shelf life. In a capsule, the shell and the fill both pick up water, and the loss on drying and flow of the fill are the early signals. In a tablet, compression and granulation change the density and the hardness, and a granulated bisglycinate may be the better feed than a milled powder. In a stick, dispersion and sedimentation matter more than assay, and an acidic flavour system moves the pH. In a gummy, water activity, pH and heat meet: glycine is an amino acid, and a reducing sugar in a warm, moist matrix can brown it. That browning is a colour and flavour change rather than a calcium result, and it is the reason a gummy trial should carry colour and loss-on-drying checks beside the assay. ## Assigning the shelf life Assign the shelf life after the study, not before it. The certificate does not carry a shelf life; the specification, the stability summary and the pack do. A retest date is not a shelf life, and a shelf life on a certificate without a study behind it is a claim the buyer cannot audit. State the storage condition with the shelf life: closed, dry, at a named temperature range, away from strong odours. Shipping excursions are part of the assessment; a closed foil pouch is forgiving for a short excursion, an open one is not. Re-test after a known excursion rather than assuming the original result still applies. The catalog specification is published on the calcium bisglycinate product page. The release lines are read on the COA page, the market rules are on the compliance page, and the pack sizes are on the MOQ page. The moisture test is defined in the loss-on-drying note. ### 04 Calcium bisglycinate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-bisglycinate/moq/ Reviewed: 2026-11-18 The minimum order for calcium bisglycinate is 1 kg, packed as a foil pouch and cut from a released lot with its own certificate. The production pack is a 25 kg fiber drum, and the lot code on the pouch is traceable to it. Catalog grades ship in 1–7 days; a custom mesh, a granulation or a destination document set adds time to that window. In one lineThe 1 kg pouch is the unit for qualifying a lot; grade, pack and destination shape everything after it. ## Why the minimum is 1 kg The 1 kg unit exists for qualification, not for retail. It is enough for a trial batch, a retained sample and an independent check, and it is small enough to be cut from a production lot without starting a new batch. The certificate covers the lot, so the pouch and the drum can be compared on the same document. At 21% calcium, 1 kg carries about 210 g of calcium. That is a useful trial quantity for a capsule or a stick prototype and far short of a production run. The minimum is therefore about traceability and documentation as much as about mass: the buyer gets a lot code, a COA and a pack that can be tested before the drum is ordered. Custom mesh and granulation can carry a different minimum, because the material has to be milled or granulated as a batch. Confirm the minimum with the grade, not only with the product name. ## The two catalog packs Catalog packs for calcium bisglycinate | Pack | Net weight | Typical use | What ships with it | Foil pouch | 1 kg | Qualification, sample and small trial | Lot code and COA | Fiber drum | 25 kg | Production | Lot code and COA Both packs are closed units. The foil pouch is the moisture barrier for the small quantity; the fiber drum is the production unit. Keep the pack closed in store, and record which pack a sample came from. A sample without a lot code cannot be compared with the production drum. ## Lead time Catalog grades are quoted at 1–7 days from a released lot. The count begins at order confirmation, not at the first enquiry. A custom mesh, a granulation, a private-label pack or a document set that has to be legalised adds time, and the destination and the mode of transport add more. Use the lead time as a planning figure until the quantity, the pack, the destination and the documents are confirmed. A split delivery or a call-off schedule should be agreed in the order, not assumed from the catalog lead time. ## The six details a quotation needs A quotation is comparable when it answers six questions. Ask for all six in the first message; a reply that gives only a calcium figure and a mass cannot be compared with another supplier's reply. - The product and grade: 80-mesh powder, granulated, or milled to 100 mesh. - The quantity and the pack: 1 kg pouches, 25 kg drums, or a mix of both. - The destination and the delivery term: the country, the delivery address and the Incoterm. - The documents: COA, TDS, SDS, specification, and the allergen, GMO and irradiation statements. - The tests and limits: glycine by HPLC, free glycine, XRD, the arsenic limit and any tighter microbiological limit. - The required date and the label: the date the material is needed and any private-label or lot-code format. The quotation should name the specification it is made against. A quotation made against a different mesh, a different loss-on-drying limit or a different arsenic limit is not a lower offer; it is a different product. ## Samples and retains The 1 kg pouch is the sample unit. Ask for a sample from the production lot, with the COA and the lot code, rather than a hand-made trial lot. Test it in your own matrix: flow on the filler, dispersion in the stick, hardness on the press, and loss on drying after storage in your room. Retain part of the sample and send another part to an outside laboratory if the identity or the contaminants matter. The sample, the COA and the retain should carry the same lot code; without that link, a passing sample says nothing about the drum that follows it. ## What the order should state Put the specification on the purchase order, not only in the enquiry. The order should name the grade, the pack, the quantity, the specification revision, the documents that ship with the lot and the destination. The COA should ship with each lot, and the lot code should be traceable from the certificate to the pack. Agree the non-conformance route before the first delivery: who tests, which laboratory is the referee, what happens to a lot that fails, and how a replacement is handled. Commercial terms, payment and delivery are confirmed in the order; this page does not set them. The catalog specification is published on the calcium bisglycinate product page. The certificate lines are read on the COA page, the market rules are on the compliance page, and the storage conditions are on the stability page. The minimum-order term is defined in the MOQ note, and the release process is described on the quality page. ### 05 Where calcium bisglycinate is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-bisglycinate/compliance/ Reviewed: 2026-11-18 Calcium bisglycinate is a permitted calcium source for food supplements in the EU and Great Britain, and it is sold in the US as a dietary ingredient. Each market asks a different question: the EU checks the form, the contaminants, the label and the claim; the US checks the ingredient basis, the Supplement Facts panel and the claim; the UK checks its retained list and claims register. In one lineA permitted form, a contaminant ceiling, a label and a claim are four different questions, and each market answers them its own way. ## Four checks, one file Four checks sit between the powder and a lawful label: the permitted form, the contaminant ceiling, the supplement label and the claim. The certificate supports all four but does not answer them alone; the operator is responsible for the form, the dose, the label and the claim. This is a sourcing reference, not legal advice. Great Britain works from a retained permitted-forms list. The 2003 Food Supplements (England) Regulations and their devolved counterparts carry it, and calcium bisglycinate is on the GB list; a UK launch checks that list rather than the EU text. GB retained the contaminant ceilings and the 800 mg reference value, and Northern Ireland follows the EU list under the Windsor Framework. The UK label follows the retained food information rules and carries the UK address of the food business operator. Confirm the current GB wording before printing. ## European Union Directive 2002/46/EC sets a positive list of permitted vitamin and mineral forms for food supplements. Calcium bisglycinate appears in Part B of Annex II, so the form is permitted; the consolidated text is the reference. Regulation (EU) 2023/915 applies from 25 May 2023 and replaced Regulation (EC) No 1881/2006. Section 3 of the Annex sets lead at 3.0 mg/kg, cadmium at 1.0 mg/kg and mercury at 0.10 mg/kg for food supplements. There is no harmonised EU limit for arsenic, so the buyer sets one; the limits apply to the supplement as sold, so the ingredient's contribution is calculated from the dose. Regulation (EU) No 1169/2011 sets the general food information rules, and Directive 2002/46/EC adds the supplement particulars: the food supplement statement, the nutrient and its amount per portion, the percentage of the nutrient reference value, the warning not to exceed the daily dose, the warning to keep the product out of reach of children, and the statement that the product is not a substitute for a varied diet. The calcium reference value is 800 mg. Health claims are governed by Regulation (EC) No 1924/2006 and the authorised list in Regulation (EU) No 432/2012. A calcium claim has to use the authorised wording; the source-of condition is 15% of 800 mg, or 120 mg in the daily portion. The claim belongs to calcium, not to the chelate form. ## United States The US does not maintain a positive list of permitted supplement forms. A calcium bisglycinate supplement rests on the dietary ingredient definition in DSHEA, section 201(ff)(1). The file should say which basis applies: an NDI notification at least 75 days before marketing, a GRAS conclusion, or evidence of marketing before 15 October 1994. The FDA does not approve a supplement or its label before sale. The Supplement Facts panel follows 21 CFR 101.36 and carries the serving size, the calcium per serving and the percentage of the Daily Value. The Daily Value for calcium is 1,300 mg for adults and children four years and older. A structure/function claim must be truthful and substantiated; it carries the DSHEA disclaimer in 21 CFR 101.93, and the marketer notifies the FDA within 30 days of first marketing. Disease claims are not permitted. The cGMP rule in 21 CFR 111 requires identity testing, supplier qualification and batch records, so the buyer's identity test on receipt is part of the file. There is no federal lead limit for supplements. California's Proposition 65 is the exposure rule many US buyers use: 0.5 µg/day maximum allowable dose for lead and 15 µg/day no-significant-risk level. Exposure is calculated from the daily dose. ## Contaminant limits Contaminant limits for calcium bisglycinate in a food supplement | Metal | Catalog release limit | EU limit (2023/915) | GB limit (retained) | US federal limit | Lead (Pb) | ≤3 mg/kg | 3.0 mg/kg | 3.0 mg/kg | None federal | Arsenic (As) | ≤2 mg/kg | No harmonised limit | No harmonised limit | None federal | Cadmium (Cd) | ≤1 mg/kg | 1.0 mg/kg | 1.0 mg/kg | None federal | Mercury (Hg) | ≤0.1 mg/kg | 0.10 mg/kg | 0.10 mg/kg | None federal The catalog limits are release ceilings on the ingredient. The EU and GB limits apply to the supplement as sold, so the contribution is calculated from the dose. A buyer who needs a tighter arsenic limit writes it into the specification. ## The claim boundary The claim boundary is the same in all three markets: a disease claim is not permitted, and a nutrient claim has to stay inside the authorised wording and conditions. In the EU and UK that means the current register; in the US it means a structure/function claim with substantiation, the DSHEA disclaimer and the 30-day notification. A certificate is not a claim file. The form is not a claim: “calcium bisglycinate” is an ingredient name and “chelate” describes the form; neither adds a permitted claim. ## The document file - Specification naming the form, formula, CAS number, calcium range, loss on drying, mesh and density. - Batch COA with the method and result for each line, including the contaminant and microbiological panels. - Contaminant report against the EU or GB limits, with the buyer's arsenic limit. - Identity file: infrared spectrum, glycine reaction, glycine by HPLC and the calcium-to-glycine ratio. - Allergen, GMO, irradiation and animal-derived input statements. - Label worksheet with calcium per portion and the % NRV or % Daily Value. - Claim file with the register entry or the US substantiation, disclaimer and notification record. - Stability summary and lot traceability from the certificate to the pack. ## Pre-shipment checklist - Is the form named on the label on the current permitted list for the destination market? - Do lead, cadmium and mercury meet 3.0, 1.0 and 0.10 mg/kg, and is an arsenic limit set by the buyer? - Is calcium per portion calculated against 800 mg in the EU and UK, or 1,300 mg in the US? - Does the artwork carry the supplement particulars, the daily-dose warning and the storage statement? - Is every claim on the current register, or supported by a US substantiation file with the disclaimer and notification? - Is the US dietary ingredient basis documented, and is the identity test on receipt planned under 21 CFR 111? - Is the destination checked for Member State, GB or Northern Ireland rules before the label is signed? The catalog specification is published on the calcium bisglycinate product page. The certificate lines are read on the COA page, the order details are on the MOQ page, and the market notes are in the EU, US and UK references. ### 06 How we prove a calcium bisglycinate lot is the chelate URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-bisglycinate/identity/ Reviewed: 2026-11-18 Calcium bisglycinate cannot be identified from its calcium figure. Calcium citrate tetrahydrate reports about 21.1% calcium, calcium sulfate dihydrate and dicalcium phosphate dihydrate about 23.3%, and the bisglycinate itself about 21.3% — all inside or beside the catalog window. The identity case is built in layers: appearance and solubility, calcium by EDTA, glycine by infrared spectrum and reaction, a calculated calcium-to-glycine ratio, and a phase screen for the common calcium salts and free glycine. The layers have to agree. In one lineA calcium assay can only name the element; the ligand, its ratio and the crystalline phases are what identify the chelate. ## Five layers of proof The identity layers for calcium bisglycinate | Check | Method | Evidence | Blind spot | Appearance and solubility | Visual; water | White powder, sparingly soluble, near-neutral 5% suspension | Any white calcium powder can look the same | Calcium | Complexometric EDTA | 18.5–23.0% calcium | Citrate, sulfate and phosphate sit in the same window | Glycine | Infrared spectrum and glycine reaction | Glycine is present | A blend with added glycine also passes | Ligand ratio | Glycine by HPLC; calcium by EDTA; calculated | A calcium-to-glycine ratio near 1:2 | Needs a quantitative glycine assay and a free-glycine figure | Phase screen | XRD and FTIR | Crystalline carbonate, citrate, sulfate, phosphate or free glycine; coordination | Needs reference standards and a stated detection limit Run the layers in that order. Calcium narrows the field; glycine shows the ligand is present; the ratio shows how much is there; the phase screen looks for the crystalline substitutes a blend can hide. A contaminant screen sits beside them and does not replace any of the five. ## The calcium-to-glycine ratio The anhydrous formula has a mass of 188.20, made up of one calcium, two glycine ligands and no water. A pure 1:2 chelate carries 21.3% calcium and 79.8% glycine, which is a molar ratio of 2.00 glycine per calcium. The ratio comes from arithmetic on the two assays, and no calcium result can supply it. Work it on a 100 g basis. A lot reporting 20.5% calcium and 76.0% glycine gives 0.5115 mol calcium and 1.0124 mol glycine, a ratio of 1.98. A lot at 21.0% calcium and 70.0% glycine gives 1.78; it still passes a calcium-only specification, but it is not the same chelate. Total glycine includes free glycine. In that example, at 3% free glycine the bound glycine is 73.0%, and the ratio on the bound figure is lower than on the total. Ask for the free-glycine result beside the total and state which figure the ratio uses. The catalog certificate identifies glycine by reaction and infrared spectrum; a quantitative glycine assay and a free-glycine figure are separate lines to agree when the ratio is a release criterion. The catalog window of 18.5–23.0% is wider than the 21.3% stoichiometric figure. At 23.0% calcium with 79.8% glycine the ratio would be 1.85, not 2.00, so a high calcium result is not automatically a better chelate. The ratio checks the form; calcium checks the element. ## XRD, FTIR and the phase screen X-ray diffraction reads the crystalline phases in the powder. Calcite, the common crystal form of calcium carbonate, shows its principal reflection at about 29.4° two-theta; lime and portlandite have their own sets; calcium citrate, calcium sulfate as gypsum and dicalcium phosphate have identifiable patterns; free glycine has polymorphs with distinct reflections. A scan that reports “no crystalline impurity detected” should state the detection limit, because a statement without a limit describes the method, not the sample. Infrared spectroscopy reads the coordination. The carboxylate stretching bands of glycine shift when the carboxylate binds a metal, and the N–H region changes with the salt form. The lot spectrum should match a reference standard of the same hydrate and grade, not a library printout. XRD finds phases; FTIR reads the bonding; the ratio reads the proportion. None of the three replaces the others. The XRD method note sets out the sample preparation and the detection-limit question, and the FTIR note explains the limits of a spectrum comparison. ## The substitutes that fit the calcium window Substitutes that can sit inside the calcium window | Material | Approximate calcium | What the calcium figure does | What exposes it | Calcium carbonate | 40% | Lifts calcium; a small addition moves the result | Effervescence in acid; calcite by XRD; no glycine | Calcium citrate tetrahydrate | 21.1% | Matches the chelate almost exactly | Citrate reaction and IR; citrate by XRD; no glycine | Calcium sulfate dihydrate | 23.3% | Matches the top of the window | Sulfate test; gypsum by XRD; no glycine | Dicalcium phosphate dihydrate | 23.3% | Matches the top of the window | Phosphorus test; phosphate by XRD; no glycine | Calcium oxide or hydroxide | 71% or 54% | Lifts calcium and pH | Alkaline slurry; lime or portlandite by XRD | Added glycine | 0% | No effect on calcium; makes glycine tests positive | Free glycine; ratio; glycine by XRD The blend route is the hardest case. Calcium carbonate or citrate can be mixed with free glycine so that calcium and the glycine reaction are both positive, and the blend can be tuned to a ratio near 2.00. The free-glycine result, the phase screen and the absence of the chelate's coordination in FTIR are what expose it. ## How to write the specification - “Calcium bisglycinate, C4H8CaN2O4, CAS 136-26-5.” - “Calcium 18.5–23.0% by complexometric EDTA, reported on the material as sold.” - “Identification by infrared spectrum and glycine reaction, conforms to reference.” - “Loss on drying ≤5.0%; pH 6.0–8.0 (5% suspension); ≥95% through 80 mesh; bulk density 0.50–0.80 g/mL.” - “Glycine by HPLC and free glycine on request; calculated calcium-to-glycine molar ratio reported with the lot.” - “XRD and FTIR phase screen: no crystalline calcium carbonate, calcium citrate, calcium sulfate, dicalcium phosphate or free glycine detected; detection limit reported.” - “No added calcium salt or glycine at any stage; heavy metals and microbiology as per the catalog.” A specification that names only calcium, mesh and a glycine reaction describes a calcium powder with glycine in it. The ratio, the free-glycine figure and the phase screen make it specific to the chelate. ## Five questions for the supplier - What is the calcium result, the method and the basis: as sold or dried? - Is glycine identified by infrared spectrum and reaction, and can you report glycine by HPLC and free glycine? - What is the calculated calcium-to-glycine molar ratio for this lot, and which glycine figure was used? - Is there an XRD and FTIR phase screen for carbonate, citrate, sulfate, phosphate and free glycine, and what is its stated detection limit? - Is any calcium salt or glycine added at any stage, and what batch record supports the answer? Those five answers are the specification; a calcium percentage is not. The certificate lines are on the COA page, the salt choice on the salt comparison page, the fill arithmetic on the bisglycinate versus citrate page, and the catalog specification on the product hub. ### 01 What the COA for magnesium L-threonate actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-l-threonate/coa/ Reviewed: 2026-11-18 A certificate for magnesium L-threonate reports two potency figures, not one: the salt assay at 98.0–102.0% on the dried basis and the elemental magnesium at 7.2–8.3%. Around them sit the identity tests, pH, loss on drying, particle size and the contaminant panel. Every lot is released against the same frame, and the batch COA carries the result for that lot. In one lineTwo percentages share one certificate: the salt assay describes the molecule, the magnesium figure describes the element, and neither one establishes the L form. ## The one-page sheet The certificate is a release record rather than a catalogue. Each parameter is paired with a method, a limit and a result. A number with no method cannot be audited; a limit with no result is only an intention. Batch COA frame · magnesium L-threonate, catalog release limits | Parameter | Method | Release limit | Reported as | Appearance | Visual | White to off-white crystalline powder | Result | Identification | IR and L-threonate reaction | Conforms to reference | Result | Magnesium L-threonate, salt | Titration, dried basis | 98.0–102.0% | Result | Magnesium (Mg) | Titration | 7.2–8.3% | Result | pH, 5% solution | Potentiometry | 5.8–9.0 | Result | Loss on drying | Gravimetric | ≤5.0% | Result | Particle size | Sieve analysis | ≥95% through 80 mesh | Result | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Result | Microbiology | Plate count and enrichment | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent | Result Microbiology is a second block on the same page. The limits are written into the specification before the lot is made. ## What 98.0–102.0% is measured against The salt assay answers how much magnesium L-threonate the sample contains. The magnesium figure answers how much of the element is present. The two are related by the formula, and they are not interchangeable. Anhydrous magnesium L-threonate has the formula C₈H₁₄MgO₁₀ and a molar mass of about 294.5 g/mol. Magnesium accounts for 24.3 g/mol of that total, or 8.25%. A salt assay of 100% therefore corresponds to about 8.25% magnesium; 98.0% corresponds to about 8.09% and 102.0% to about 8.42%. The catalog magnesium range of 7.2–8.3% brackets that figure, with room for hydrate variation and method uncertainty. “Dried basis” is the second part of the definition. If loss on drying is 5.0% and the dried-basis salt assay is 98.0%, the material as weighed contains about 93.1% salt. The water has been removed from the denominator, not from the drum. The certificate should say which basis each result uses; the loss-on-drying line allows the conversion. The ligand supplies a third view. Magnesium L-threonate is roughly 92% L-threonic acid by mass, so a 98% salt assay corresponds to about 90% acid. The EU novel-food specification describes the material by an L-threonic acid content of not less than 85% and magnesium at 7.2–8.3%. Both frames can describe the same lot, but the market file asks for its own figure. ## Where the limit ends and the result begins A release limit is a gate. A batch result is a measurement. The batch COA confirms the lot against the limits, and the result belongs beside the limit, the method and the basis. “Conforms” on its own is a conclusion without the evidence; it is acceptable for a pass/fail attribute such as appearance or identification, not for an assay. The contaminant lines deserve the same discipline. A lead limit of 3 mg/kg is also the EU ceiling for a food supplement, so a lot released at the limit leaves no margin for the rest of the formula; a tighter purchase limit is the buyer’s choice. The arsenic figure of 2 mg/kg is a buyer-set limit, because the EU has no harmonised arsenic maximum for food supplements. Microbiology is reported as counts and as absence. The absence of E. coli and Salmonella is a qualitative result; the aerobic plate count is a number. Both belong on the certificate with the method named. ## What moves between lots The salt assay tracks crystallisation and drying, and the magnesium figure moves with it. A lot with a high salt assay and a low magnesium figure deserves a check of the hydrate state and the calculation before an adulterant is suspected. Water content reflects the drying stage and the water held in the crystal; pH reflects the acidity left by the crystallisation liquor; mesh reflects milling and sieving. Because the magnesium content is only about 8%, a small absolute change is a larger relative change. A shift of 0.1 percentage points is about 1.2% of the magnesium figure. That is why the magnesium method needs good repeatability, and why one decimal place matters more here than on a 14% salt. Colour is the weakest quantitative signal here, and often the one that starts the most useful conversation. A cream or tan cast can follow an overheated dryer or a trace of iron. The assay may still pass. Ask for the batch record instead of rejecting the lot on sight. ## When a second laboratory earns its fee Outside testing earns its place at three moments: a new source, a first shipment into a regulated market, or a label claim that the certificate does not actually support. There is no value in duplicating every line. Pick the few tests that close the gap the supplier’s data leaves open. For this salt that usually means an independent titration for the salt and for magnesium, ICP-MS for the contaminant panel, an L-threonic acid assay by ion chromatography or LC-MS, specific rotation for the L form, and IR for the fingerprint. X-ray diffraction can add a screen for crystalline magnesium oxide if a blend is suspected. The titration method note explains what a complexometric result does and does not prove. A second laboratory is also the neutral ground for a disagreement: put the retained sample, the supplier’s COA and the agreed specification in front of it, and ask which tests discriminate the form rather than for a repeat of the whole panel. ## Six lines to compare between suppliers - The salt assay, its method and its basis: dried or as-is. - The magnesium figure and the method beside it. - The identity package: IR, L-threonate reaction, L-threonic acid and specific rotation. - Loss on drying and the hydrate state named on the certificate. - pH, particle size and the mesh fraction actually measured. - Heavy metals, microbiology and the batch record behind the lot number. Two quotations that match on the salt assay but diverge on the other five lines describe different materials, whatever the heading on the offer. The identifier should be identical on the certificate, the pouch and the retained sample; if one of the three differs, the traceability chain is broken. The catalog specification sits on the magnesium L-threonate product page. The identity page sets out the tests that distinguish the L salt from a blend, the grade page compares the salts, and the quality page describes how a lot is released. ### 02 Magnesium L-threonate or magnesium glycinate: choosing a magnesium salt URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-l-threonate/grades/ Reviewed: 2026-11-18 Magnesium L-threonate and magnesium bisglycinate deliver the same element from different molecules. Threonate carries 7.2–8.3% magnesium; the 14% glycinate grade carries 13.5–14.2%. The choice is settled by the salt weight a dose requires, the dosage form that has to hold it, and the label the destination market allows. In one lineThreonate and glycinate deliver the same element at different salt weights; the capsule, the daily magnesium target and the label decide which one fits. ## One element, two delivery packages A magnesium salt is a package around a magnesium ion. The package determines how much of the powder is actually magnesium, how the powder behaves in a blend, and which name has to appear on the label. Threonate and glycinate are both organic salts, but their packages are different sizes, and that difference reaches every part of the formula. The comparison is not a ranking. A salt that carries less magnesium per gram is not a weaker material; it is a material that asks for more powder to deliver the same milligram figure. The useful question is whether the finished product can hold that powder and still meet its label, its capsule count and its market conditions. ## The two salts side by side Magnesium L-threonate and magnesium bisglycinate · catalog figures | Property | Magnesium L-threonate | Magnesium bisglycinate | Formula | C₈H₁₄MgO₁₀ | Mg(C₂H₄NO₂)₂ | CAS | 778571-57-6 | 14783-68-7 | Magnesium content | 7.2–8.3% | 13.5–14.2% | Salt for 100 mg magnesium | 1,205–1,389 mg | 704–741 mg | pH, 5% solution or suspension | 5.8–9.0 | 8.5–11.5 | Loss on drying | ≤5.0% | ≤8.0% | Particle size | ≥95% through 80 mesh | ≥95% through 40 mesh | EU food-supplement status | Novel food authorised in 2024; Annex II entry added in 2025 | Annex II magnesium salt The salt-weight row is the arithmetic that matters. It uses a 100 mg magnesium reference only to compare the two materials; it is not a dose recommendation. The same reference shows why a threonate capsule has to be larger, or more numerous, than a glycinate capsule for the same magnesium figure. ## What the powder does in the blend Magnesium L-threonate is freely soluble in water, and its 5% solution covers a wide pH band from 5.8 to 9.0. Magnesium bisglycinate dissolves as well, though its 5% suspension is alkaline (pH 8.5–11.5). Against an acidic active, the threonate may be the easier partner; in an already alkaline blend, the glycinate may be less likely to shift the pH. Neither rule replaces a compatibility test on the actual formula. The physical specification also differs. Threonate is supplied at 80 mesh, glycinate at 40 mesh. The finer threonate powder dissolves quickly but can dust, segregate or bridge in a hopper; granulated threonate is available on request. The loss-on-drying limits, ≤5.0% and ≤8.0%, describe different water loads, and water is the variable that most often changes flow and capsule fill. Both materials are crystalline powders, and both can be milled or granulated. The mesh on the certificate is a sieve result, not a guarantee of flow. Ask for the bulk density and the actual mesh fraction when the formula is sensitive to either. ## Dose, fill weight and the dosage form Start from the magnesium target per serving. At 8.3% magnesium, 1,000 mg of threonate delivers 83 mg; at 7.2%, it delivers 72 mg. The same 1,000 mg of a 14% glycinate delivers about 140 mg. The salt weight per milligram of magnesium is therefore about 12–14 mg for threonate and about 7 mg for glycinate. A capsule holds a fixed volume, not a fixed weight. A 400–500 mg fill is a common working range for a mineral powder, and the exact figure depends on bulk density. For a 100 mg magnesium target, threonate needs roughly 1,200–1,390 mg of salt, or three to four capsules at that fill; glycinate needs about 700–740 mg, or two capsules. The exact numbers belong to the formula, but the direction is fixed: the lower the magnesium content, the more capsules the same target requires. The dosage form narrows the choice further. Tablets need a compressible powder and a larger tablet weight for threonate. Powder sticks can carry 1–3 g of salt and suit the lower magnesium density. Drink mixes benefit from the free solubility and the wide pH band. Gummies add water, heat and a pH of their own, so the salt choice has to be tested in that matrix rather than assumed from the powder. The EU novel-food conditions add a ceiling that is specific to threonate: 250 mg magnesium a day, which at 8.3% is about 3,000 mg of salt. At 7.2%, the same 250 mg needs about 3,470 mg. A label dose has to be built from the assay, not from the nominal salt figure. ## What to rewrite when the salt changes A purchase specification is not transferable between salts. When threonate replaces glycinate, or the reverse, rewrite the lines that carry the identity and the fill arithmetic. - The salt name and the hydrate state, not just “magnesium”. - The salt assay and the elemental magnesium range, each with its method and basis. - The L-threonic acid or glycine figure that supports the ligand side of the identity. - Loss on drying, pH, mesh and the bulk density that set the fill. - The label basis: elemental magnesium per serving, or the salt weight, and the capsule count that follows. The finished-product specification has to change with the salt as well: serving size, milligrams of magnesium per serving, number of capsules, and any overage. A formula copied from a glycinate line to a threonate line will under-deliver magnesium unless the fill is recalculated. ## When the other salt is the better fit Glycinate is the better fit when the magnesium target is high, the capsule count has to stay low, or the label needs a form with a long Annex II history and no novel-food conditions. Its 13.5–14.2% magnesium does more work per gram of powder. Threonate is the better fit when the label names magnesium L-threonate, the magnesium target is modest enough for the salt weight, and the market file supports the form. In the EU that means the novel-food conditions, including the adult-only labelling and the 250 mg magnesium daily figure; in the UK the novel-food authorisation and the monohydrate purity criteria apply. Check those before the formula is fixed, not after the artwork is approved. The full magnesium content and label comparison is on the threonate versus glycinate page. The specification is on the magnesium L-threonate product page, the certificate lines are on the COA page, and the market conditions are on the compliance page. The magnesium bisglycinate page carries the other salt’s specification, and the elemental assay note explains why the magnesium figure is not a purity figure. ### 02.1 Magnesium L-threonate vs glycinate: magnesium content, dose and the label URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-l-threonate/grades/threonate-vs-glycinate/ Reviewed: 2026-11-18 The two salts differ by a factor of about 1.7 in salt weight for the same magnesium. At 7.2–8.3% magnesium, threonate needs 1,205–1,389 mg of salt for 100 mg of magnesium; glycinate at 13.5–14.2% needs 704–741 mg. That difference decides the capsule count, the serving size and the number the label declares. In one lineAt 7.2–8.3% magnesium, threonate needs about 1.7 times the salt weight of glycinate for the same magnesium dose, and that difference reaches the capsule and the label. ## The conversion, not the percentage The magnesium percentage is a concentration, not a dose. To use it, divide the magnesium target by the assay: 100 mg ÷ 0.083 = 1,205 mg of threonate, and 100 mg ÷ 0.072 = 1,389 mg at the low end. For glycinate, 100 mg ÷ 0.142 = 704 mg and 100 mg ÷ 0.135 = 741 mg. The range matters as much as the midpoint, because a lot at the low end needs more powder than a lot at the high end. Salt weight needed for a given magnesium target · calculated from the catalog ranges | Magnesium target | Magnesium L-threonate | Magnesium bisglycinate | 25 mg | 301–347 mg | 176–185 mg | 50 mg | 602–694 mg | 352–370 mg | 100 mg | 1,205–1,389 mg | 704–741 mg | 200 mg | 2,410–2,778 mg | 1,408–1,481 mg | 250 mg | 3,012–3,472 mg | 1,761–1,852 mg The ratio between the two columns is not a fixed number either. At the midpoints it is about 1.75; across the two catalog ranges it runs from about 1.6 to 2.0. A formulator who uses a single conversion factor for both salts will be wrong at one end of the range. ## What the fill can carry A capsule holds a volume, and the powder has a bulk density. A 400–500 mg fill is a common working range for a mineral powder, and excipients reduce the active weight further. At a 500 mg fill, a 100 mg magnesium target takes three threonate capsules and two glycinate capsules; a 250 mg target takes seven and four. At a 400 mg fill, the threonate count rises to four for 100 mg and eight to nine for 250 mg. A larger capsule or a denser granulation can reduce the count, but it cannot reduce the powder weight. A tablet has the same arithmetic with a compression limit. A 100 mg magnesium target from threonate is a 1.2–1.4 g tablet, or two smaller tablets; from glycinate it is a 0.7–0.74 g tablet. A stick pack can carry 1–3 g of powder, which suits threonate at a modest target. A gummy adds the weight of the gel network, so the salt weight per gummy is only part of the formula. The fill also changes the excipient load. More threonate powder means less room for a flow agent, a disintegrant or a flavour, and the capsule or tablet gets larger before the magnesium figure reaches the label. That is a formulation decision, not a reason to change the assay. ## The daily figure and the EU ceiling Build the label dose from the magnesium target, then check it against the market. The EU novel-food authorisation for magnesium L-threonate sets a maximum of 250 mg magnesium a day, corresponding to about 3,000 mg of salt at 8.3%. At 7.2%, the same 250 mg needs about 3,470 mg of salt. A product that declares 250 mg magnesium from a low-assay lot will carry more salt than the nominal 3,000 mg figure, and the label should be built from the assay rather than from the nominal number. The serving size follows. If a serving is three capsules, the magnesium per serving is three times the fill times the assay, not three times a nominal 100 mg. If a serving is one stick, the salt weight per stick sets the magnesium figure. The arithmetic should be done once, in the specification, and then checked against the label and the COA. ## What the label declares In the EU, the nutrition declaration states the magnesium figure in mg and as a share of the nutrient reference value, while the ingredient list names the salt as “Magnesium L-threonate”. The novel-food conditions add the adult-only statement and the pregnancy and lactation exclusion. The label may also state the salt weight, but that figure has to agree with the magnesium figure and the assay. In the US, the Supplement Facts panel gives the magnesium amount and its Daily Value percentage; the ingredient statement names magnesium L-threonate. A label that declares 2,000 mg of magnesium L-threonate and 100 mg of magnesium is making two statements that have to agree: at 8.3%, 2,000 mg of salt delivers about 166 mg of magnesium, not 100 mg. One of the two numbers is wrong, or the salt is not what the label says. In Great Britain, the retained nutrition and labelling rules apply, and the 2026 instruments name magnesium L-threonate monohydrate. The label has to use the permitted name and meet the novel-food conditions for the market. The salt name, the magnesium figure and the serving size are three separate declarations, and all three have to trace back to the same specification. ## When each salt fits the label Glycinate fits when the label has to deliver a high magnesium figure in a small serving, when the capsule count has to stay low, or when the market wants a form with a long Annex II history and no novel-food conditions. At 13.5–14.2%, it packs more magnesium into each gram. Threonate fits when the label names magnesium L-threonate, when the magnesium target is modest enough for the salt weight, and when the market file supports the form. The capsule count is the practical test: a 100 mg target is three to four capsules at a 400–500 mg fill, and a 250 mg target is seven at a 500 mg fill. If that count is unacceptable, the salt is wrong for the project, not the assay. Do not blend the two to hit a magnesium number without declaring both sources. A blend can reach a figure that neither salt reaches alone, but the ingredient list and the COA have to name both, and the label arithmetic has to use the blend’s measured magnesium, not the midpoint of two catalog ranges. ## Five checks before the switch - The assay basis: dried or as-is, and the lot’s actual magnesium figure. - The salt weight per serving, calculated from that figure rather than the catalog midpoint. - The capsule or tablet count at the fill the formula can carry. - The label name, the elemental magnesium declaration and the serving size. - The market conditions for the salt, including the EU adult-only and 250 mg magnesium conditions. The broader salt comparison is on the grade page. The certificate lines are on the COA page, the market conditions are on the compliance page, and the catalog specification is on the product page. ### 03 Magnesium L-threonate is stable dry; moisture and the matrix decide the rest URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-l-threonate/stability/ Reviewed: 2026-11-18 Magnesium L-threonate is a crystalline salt, and the dry powder is the stable form. A sealed pack holds the specification for as long as the pack holds; once water, a shifted pH or a warm matrix enters the picture, the finished product sets the shelf life, not the salt. The stability programme has to test the powder, the blend and the final pack as three different systems. In one lineDry, sealed magnesium L-threonate holds its specification; moisture, pH and the finished matrix decide how long the packed product holds its own. ## The dry powder The salt is supplied as a white to off-white crystalline powder, ≥95% through 80 mesh, with a loss on drying of ≤5.0%. That water limit is a release limit, not a storage specification. A lot at the top of the range can pass the certificate and still flow differently from a lot at 1%, because water sits on the particle surface as well as in the crystal. An opened pack is a different material from a sealed one. The powder is freely soluble; the fine 80 mesh fraction has more surface per gram, and in humid air it can take up water and cake faster. The first visible sign is usually caking or a change in flow, not a drop in assay. Caking is a physical failure, and the assay can still pass while the powder no longer fills a capsule evenly. Store the sealed pack cool and dry, and keep the inner liner intact. Confirm whether the pack carries a desiccant and how the pouch is resealed after sampling. A production area that opens a 1 kg pouch and returns it to a humid room is the most common way a good lot becomes a difficult one. ## Water and the 5% solution Magnesium L-threonate is freely soluble in water, and the 5% solution sits in a wide band from pH 5.8 to 9.0. Solubility is not the same as solution stability. Once the powder is dissolved, the system has water activity, a pH and a microbial load that the dry powder did not have. In a liquid or a gel, the pH shapes the speciation of the magnesium and the threonate. At the alkaline end, the margin to magnesium hydroxide or carbonate precipitation narrows; at the acidic end, the salt stays soluble but the finished pH may move on storage. Keep the finished pH inside the band that was tested, and test the band rather than a single point. Water also supports microbial growth. A multi-dose liquid needs a preservative system and a challenge test; a single-serve stick or a powder that is dissolved at home does not have the same requirement. The salt does not supply the preservative. ## What actually shortens the shelf life Stability factors for magnesium L-threonate · what changes and what to test | Factor | What it changes | What to test | Moisture | Flow, caking, effective potency per gram | Loss on drying, water activity, appearance | pH | Speciation and solubility of the salt | pH of the finished product, assay, clarity | Heat | Drying, colour, matrix reactions | Assay, colour, related substances where relevant | Matrix | Water, pH and competing ions in the formula | Assay, pH, dissolution, appearance | Packaging | Moisture and oxygen ingress | Seal integrity, loss on drying, assay | Time | All of the above, at the storage condition | Full panel at each time point The matrix deserves more attention than the salt. A capsule shell is a dry package with a little water; a tablet adds compression, a lubricant and a binder; a powder stick adds a seal and a hygroscopic carrier; a drink mix adds an acidic pH and a colour; a gummy adds water activity, heat and a gel network. Each one can fail for its own reason while the magnesium L-threonate inside is unchanged. ## A stability protocol that answers the question Run two studies, not one. The first is the powder in its commercial pack: 25°C/60% RH as the long-term condition, 30°C/65% RH as an intermediate condition where the climate requires it, and 40°C/75% RH for acceleration. The second is the finished product in its final pack, because the matrix can fail before the salt does. Test at 0, 3, 6, 12 and 24 months for the long-term condition, and at 0, 1, 3 and 6 months for the accelerated condition. At each point, report appearance, loss on drying, pH where relevant, salt assay, magnesium, L-threonic acid, microbiology and the contaminant panel at the start and end. For a tablet or capsule, add disintegration or dissolution; for a stick, add seal integrity and reconstitution. Bracketing and a matrixing design can reduce the number of packs, but not the number of questions. A single lot at a single condition gives a direction, not a shelf life. A stability study needs at least three lots for a claim that will be defended. ## The formula is the real variable In a capsule, the salt is protected from water but exposed to the shell and to the filling machine. In a tablet, compression and a lubricant can change the surface and the disintegration time; the 80 mesh powder is fine enough to blend, but it may need granulation to flow. In a stick, the seal and the carrier decide the moisture pick-up. In a drink mix, the pH and the colour system decide the appearance. In a gummy, water activity and heat are the two variables that most often change the potency per piece. Two formulation rules follow. First, do not carry a stability result from one matrix to another; a capsule result does not describe a gummy. Second, do not carry a result from one pack to another; a foil pouch and a jar are different environments. The COA page explains the release tests, and the MOQ page covers the packs the study should use. ## Assigning a shelf life The shelf life is assigned from the data for the pack and the matrix, not from the salt alone. A 24-month claim needs 24 months of long-term data, or a justified extrapolation from a shorter study. Accelerated data can support a tentative shelf life and a label, but it does not replace the long-term point. Decide whether the date is an expiry date or a retest date. An expiry date is a promise to the consumer; a retest date is a decision point for a manufacturer. The two need different data and different language on the specification and the label. Keep a retained sample from each lot and store it under the same condition as the claim. The result should be a storage statement, a pack, a date and a test panel that can be repeated. “Stable” is not a shelf life. The quality page describes the release and retention workflow, and the loss-on-drying note explains why the water figure belongs beside every stability result. ### 04 Magnesium L-threonate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-l-threonate/moq/ Reviewed: 2026-11-18 The minimum order for magnesium L-threonate is 1 kg, drawn from a released lot and packed in a foil pouch. That kilogram is a qualification unit, not a retail pack: it is enough to run a laboratory trial, a small batch or the first point of a stability study. The quotation is built from the pack, the mesh, the destination and the documents the market requires. In one lineOne kilogram drawn from a released lot is the qualification unit; the pack, the mesh and the destination market shape the quotation around it. ## Why 1 kg is the unit A mineral salt is bought twice: once to test and once to produce. The first purchase has to be large enough to run a representative trial and small enough that a failed trial does not leave a production pack on the shelf. One kilogram covers both sides of that line for a capsule or powder project. The magnesium content sets what the kilogram can do. At 8.3% magnesium, 1 kg of salt contains about 83 g of magnesium; at 7.2%, about 72 g. For a 100 mg magnesium target, that is roughly 720–830 servings before any trial loss. The number is a planning aid, not a dose recommendation or a yield promise, because the fill and the overage are formula decisions. The kilogram is drawn from a released lot, and the lot number on the pouch matches the lot number on the COA. A minimum order that cannot be traced to a certificate is not a qualification unit. The COA page explains what travels with the lot. ## The two packs The standard packs are a 1 kg foil pouch and a 25 kg fiber drum. The pouch is the trial and small-batch pack; the drum is the production pack. Both should carry a liner, a lot label and a net weight, and both should be sealed against moisture rather than simply closed. The powder is 80 mesh, and a fine powder needs a liner that holds the fines and a seal that survives handling. Confirm the liner material, the closure and whether the pack includes a desiccant. Confirm the pallet configuration for the drum, and the inner pack count for a pouch order. A pack that is adequate for a laboratory shelf may not survive a palletised export. Granulated or milled-to-100-mesh material is available on request. A change of mesh or a granulation step changes the bulk density and the fill, so it belongs in the order, not in a conversation after the drum is packed. ## Lead time The usual window is 1–7 days from the point the specification and purchase order are fixed. The count starts only when the salt form, the quantity, the pack, the mesh, the destination and the document set are agreed. A query that arrives without those six items does not start the clock; it starts a correspondence. A custom mesh, a granulation step, a special pack or a document that has to be issued by a third party can add time. So can a destination that needs a legalised certificate or a pre-shipment inspection. Ask for the lead time in writing with the quotation, and keep the shipping time separate from the production time. ## What a quotation needs from you Six items that shape a magnesium L-threonate quotation | Item | What to send | Salt form and hydrate | The name on your specification, including the hydrate state | Quantity and pack | Kilograms, pouch or drum, and the number of packs | Particle size | 80 mesh as standard, or the granulated or 100 mesh variant | Destination and Incoterm | The market, the port or address, and the Incoterm | Documents and tests | COA, TDS, MSDS, allergen statement, market-specific file | Label and COA requirements | The product name, the lot format and any customer-specific fields The six items are not a formality. A quotation for 1 kg of 80 mesh powder to a laboratory and a quotation for 25 kg of granulated material to a supplement manufacturer are different offers, even when the salt is the same. The compliance page lists the market documents that belong in the fifth and sixth items. ## Samples Samples come from a released lot and are sent with the COA and the technical data sheet. Agree the sample size, the pack and the dispatch date in the quotation; a sample without a lot number cannot be compared with the production lot later. Keep half of the sample under the same storage condition as the bulk. If the trial fails, the retained half is what lets a laboratory and a supplier discuss the same material rather than two different powders. Record the date, the lot and the test result in the trial file. ## Terms to settle before the order The quotation should state the Incoterm, the payment route, the validity period, the document set and the quantity tolerance. It should also state what is excluded: a test that is not on the standard panel, a pack that is not in the standard range, or a certificate that needs an extra signature. Agree the reorder basis before the first drum is consumed. A reorder that names the same specification and the same pack is a repeat; a reorder that changes the mesh or the market is a new order. The MOQ note explains the unit, and the logistics page covers the movement of the pack. The product specification is on the magnesium L-threonate page. ### 05 Where magnesium L-threonate is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-l-threonate/compliance/ Reviewed: 2026-11-18 In the European Union and Great Britain, magnesium L-threonate is a listed magnesium source for food supplements; in the United States, the file must establish the dietary-ingredient basis for the exact form. Permission is only the first check. The salt carries a novel-food history, a daily magnesium figure, a labelling condition and a contaminant panel, and each one has to be shown in the file. In one linePermitted status is form-specific: the EU, US and UK each ask for their own basis, and the file must show the exact salt, the dose and the label wording. ## Four checks, one file The file answers four separate questions. Is this exact salt a permitted source in this market? What daily amount and population does the permission cover? What must the label say? And which contaminant, microbiological and claim limits apply to the finished product? A certificate supports identity and purity, but the permission, the dose and the label are product-level facts. The file is complete when the four answers point to the same salt, use level and finished product. ## European Union and the United Kingdom Magnesium L-threonate was authorised as a novel food by Commission Implementing Regulation (EU) 2024/2694. The authorisation covers food supplements for adults, excluding pregnant and lactating women, at a maximum of 250 mg magnesium a day, corresponding to about 3,000 mg magnesium L-threonate. The label has to name “Magnesium L-threonate” and carry the adult-only statement excluding pregnant and lactating women. Commission Regulation (EU) 2025/2225 then added magnesium L-threonate to Annex II to Directive 2002/46/EC as a permitted magnesium source. The two instruments do different jobs: the novel-food authorisation sets the conditions of use and labelling; the Annex II entry makes the salt a permitted form. The file should cite both. As of this review, the consolidated text is the reference; a label printed years ago is not evidence of current status. The EU novel-food specification uses L-threonic acid at not less than 85% and magnesium at 7.2–8.3%. That is not the same line as a 98.0–102.0% salt assay; if the file quotes the novel-food specification, the COA has to carry that figure or the calculation that connects the two. The COA page sets out the difference between the salt assay and the elemental figure. Great Britain maintains its own nutrition and novel-food lists. As of this review, England, Scotland and Wales have each added magnesium L-threonate monohydrate to the substances permitted in food supplements during 2026, with purity criteria set alongside. Northern Ireland continues to apply the EU novel-food list. The UK file therefore needs the instrument for the relevant nation, the purity criteria and the novel-food authorisation. The GB permission is built on the monohydrate, and the purity criteria are specific to that form. A certificate that names “magnesium L-threonate” without a hydrate state does not show which form the lot is. That is a specification point before it is a labelling point, and it is the reason the identity page regards the hydrate state as part of the salt’s identity. ## United States A magnesium L-threonate supplement is regulated as a dietary supplement. The legal basis is that the ingredient is lawful for its intended use. That basis can be a GRAS notice, a new dietary ingredient notification, or another documented conclusion, and it is specific to the form and the use level. A public GRAS notice exists for magnesium L-threonate hydrate (GRN 499), with a no-questions letter from the FDA. A notice is tied to the notifier’s material and intended use; it is not a blanket approval of every hydrate or use level. The US file should state the basis in one sentence and attach the document, with the form and the notification number where one applies. On the label, the Supplement Facts panel declares elemental magnesium, while the ingredient list names the salt. A structure/function statement must be truthful and not deceptive, must not be a disease claim, and carries the required disclaimer. ## Contaminants and microbiology Contaminant limits · EU food-supplement ceilings and catalog release limits | Parameter | EU food-supplement limit | Catalog release limit | Lead (Pb) | 3.0 mg/kg | ≤3 mg/kg | Cadmium (Cd) | 1.0 mg/kg | ≤1 mg/kg | Mercury (Hg) | 0.10 mg/kg | ≤0.1 mg/kg | Arsenic (As) | No harmonised EU maximum for supplements | ≤2 mg/kg | Aerobic plate count | Set by specification and process | ≤1,000 cfu/g | Yeast and mould | Set by specification and process | ≤100 cfu/g | E. coli | Absence in the specification | Absent | Salmonella | Absence in the specification | Absent The EU limits come from Regulation (EU) 2023/915 and apply to the food supplement as placed on the market. A raw material released at the ceiling leaves no room for the formula; a tighter purchase limit is the buyer’s choice. Arsenic has no harmonised EU maximum for supplements, so the 2 mg/kg figure is a specification choice, not an EU number. ## The claims boundary In the EU, magnesium claims are authorised by Regulation (EU) 432/2012 and are subject to the condition that the product provides at least 15% of the nutrient reference value per portion. The magnesium salt named on the label can carry a magnesium claim; the L-threonate part does not add an authorised claim of its own. Great Britain applies the retained magnesium claims list in the same way. In the US, a structure/function statement is allowed without pre-approval, provided it is truthful, not deceptive and not a disease claim, and provided the disclaimer is present. A statement about the salt’s identity is not a claim; a statement about what the salt does in the body is. The file should separate the two, and the label should carry only the wording the market allows. ## The document set - Batch COA with the salt assay, magnesium, identity, loss on drying, pH, mesh, metals and microbiology. - Product specification with the hydrate state and the test methods. - Technical data sheet and safety data sheet. - EU novel-food and Annex II statement, with the current citations. - US dietary-ingredient basis: the GRAS notice or the notification, with the form and use level. - UK instrument and purity-criteria statement for the relevant nation. - Allergen, non-GMO and country-of-origin statements. - Retained-sample and lot-traceability record. ## Before the file is called complete - The label names the exact salt and, for the UK, the monohydrate. - The daily magnesium from the salt is inside the authorised figure. - The adult-only statement and the pregnancy and lactation exclusion are present where required. - The contaminant limits leave margin for the finished formula. - Every claim is from the authorised list, or is a structure/function statement with the disclaimer. - The COA lot number matches the pack, the retained sample and the market file. - The citations are the current texts, not a previous consolidation. The market notes for the European Union, United States and United Kingdom carry the instruments and the reading list. The product page carries the specification, and the Annex II note explains what a positive-list entry does and does not cover. ### 06 How we prove a magnesium L-threonate lot is the L salt URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-l-threonate/identity/ Reviewed: 2026-11-18 A magnesium figure cannot establish that a lot is magnesium L-threonate, let alone the L form. Identity needs four layers: the declared name and composition, the ligand, the elemental magnesium and the chiral or crystal evidence. The IR and L-threonate reaction on the certificate are the start of that proof, not the whole of it. In one lineThe magnesium number is not an identity: the ligand, the chiral form and the crystal evidence must agree before a lot is the L salt. ## The four layers of identity Identity layers for magnesium L-threonate · the question each test answers | Layer | Question | Test | What it proves | Name and composition | Is the declared salt the formula on the label? | Specification, CAS, formula, hydrate state | The material is described, not yet tested | Ligand | Is the anion L-threonate? | IR, L-threonate reaction, L-threonic acid assay | The organic part matches the named salt | Element | Is the magnesium consistent with the salt? | Titration for magnesium, salt assay, calculated ratio | The two sides of the salt agree | Chiral and solid form | Is it the L form, and is it a salt rather than a blend? | Specific rotation, XRD, IR coordination | The stereochemistry and the solid phase match The first layer is paperwork, and it matters. A certificate that says “magnesium threonate” without the L prefix, or without a hydrate state, has not described the material precisely enough to compare with the specification. The second and third layers are the ones the catalog certificate already covers. The fourth layer is where a buyer who needs the L form has to ask for more. ## What the titration can and cannot show Magnesium L-threonate is a 1:2 salt: one magnesium ion for two L-threonate anions. The anhydrous salt, C₈H₁₄MgO₁₀, weighs about 294.5 g/mol, so magnesium is about 8.25% of the molecule and L-threonic acid is about 92%. A salt assay of 98.0–102.0% and a magnesium figure of 7.2–8.3% are two measurements of that same structure, taken from different sides. The ratio is calculated by converting both results to moles. If the salt assay is 100% and the magnesium figure is 8.25%, the material is consistent with a 1:2 salt. If the magnesium is high relative to the salt assay, part of the magnesium may come from another salt; if the salt assay is high relative to the magnesium, the hydrate or the calculation basis is the first thing to check. The ratio is a trend check, not a purity verdict, because each assay carries its own uncertainty. The magnesium range alone does not fix the hydrate. The anhydrous salt is about 8.25% magnesium, a monohydrate about 7.78% and a dihydrate about 7.36%, and all three sit inside the 7.2–8.3% band. That is why the hydrate state belongs in the specification, and why a loss-on-drying figure of ≤5.0% has to be read next to the form named on the certificate. A stoichiometric monohydrate would carry about 5.8% water, so the certificate should state the hydrate rather than leave it to be inferred. ## What XRD adds, and what it cannot do X-ray diffraction sees crystalline phases. It can show that the lot is a crystalline salt rather than an amorphous carrier, and it can detect crystalline magnesium oxide or another crystalline magnesium salt in a blend. If a material is a physical mixture of magnesium oxide and magnesium L-threonate, the diffractogram can carry both patterns; a reacted salt carries its own. XRD cannot distinguish L-threonate from D-threonate. The two enantiomers have the same powder pattern in an achiral environment, so a diffraction result says nothing about the chiral form. Specific rotation is the test for that question, and IR is the fingerprint that supports the ligand. Use the three together: XRD for the solid phase and the blend screen, IR for the functional groups, and rotation for the stereochemistry. The detection limit matters. “No crystalline magnesium oxide detected” means little unless the report also gives the limit and the sample preparation. Ask for the limit of detection and the sample preparation. The XRD method note explains what the technique can and cannot see. ## The routes that turn up in the trade Adulteration routes for magnesium L-threonate and the test that catches each | Route | What it looks like | Test that catches it | Magnesium oxide or carbonate added | Magnesium high relative to the salt assay; alkaline shift | Calculated ratio, XRD, pH | Another magnesium salt substituted | Magnesium figure plausible after blending; ligand wrong | IR, L-threonic acid assay, specific rotation | Threonic acid or calcium threonate blended in | Ligand present, but the salt is not fully reacted | Salt assay, IR coordination, ion chromatography | D- or racemic threonate | IR may match; the chiral form does not | Specific rotation | Dilution with a carrier | Salt assay and magnesium both low; powder flows differently | Salt assay, magnesium, L-threonic acid, loss on drying Substitution and dilution are the routes a magnesium-only check misses; a small oxide addition can also hide inside a wide magnesium range. A diluted lot can still sit inside the range, so the ligand assay is the check that closes the gap. ## How to write the specification - “Magnesium L-threonate monohydrate” or “anhydrous”, with CAS 778571-57-6 and the formula. - Salt assay 98.0–102.0% on the dried basis, with the titration method named. - Magnesium 7.2–8.3%, with the basis stated. - L-threonic acid not less than 85%, or the ligand assay that supports the salt assay. - Identity: IR and L-threonate reaction, plus specific rotation for the L form. - Loss on drying ≤5.0%, pH 5.8–9.0, ≥95% through 80 mesh, metals and microbiology. - “No added magnesium oxide, carbonate or other magnesium salt.” The specification should also say which figure the label will declare. If the label declares elemental magnesium, the magnesium range is the release figure that matters; if it declares the salt, the salt assay is. A specification that leaves that choice open invites a certificate and a label that do not match. ## Five questions for a supplier - Which hydrate is the lot, and what is the water content? - What is the salt assay method, and is the result on the dried basis? - What are the magnesium and L-threonic acid figures on the same lot, and what ratio do they give? - Can you supply the IR, the L-threonate reaction and the specific rotation for this lot? - Has the lot been screened for crystalline magnesium oxide or another magnesium salt, and what is the detection limit? A supplier who can answer all five is offering a specification. One who returns only a magnesium percentage is offering a number. The COA page shows where each figure sits on the certificate, the grade page compares the salt with glycinate, and the product page carries the catalog specification. The FTIR method note explains the ligand fingerprint, and the quality page describes the release record. ### 01 What the COA for magnesium malate actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-malate/coa/ Reviewed: 2026-11-18 Every lot of magnesium malate is released against a one-page certificate that reports the EDTA magnesium assay, the malate identification, Karl Fischer water, pH, particle size, bulk density and the contaminant and microbiology panels. The parameter list is fixed by the specification; the figures beside each line belong to the lot. The certificate only means something when the method, the limit and the result are read as one line. In one lineThe magnesium figure is only the first line: the certificate has to name the malate, the water and the hydrate basis before the number means anything. ## What the sheet carries The certificate follows the release specification for magnesium DL-malate dihydrate. Each row names the parameter, the method and the limit the lot has to meet, and the measured result sits beside them on the lot certificate. A result without a method cannot be compared with another laboratory's number. Release specification · magnesium DL-malate dihydrate, CAS 869-06-7 | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Magnesium (Mg) | Complexometric EDTA titration | 11.3–11.8% | Identification | Malate reaction and infrared spectrum | Conforms to reference | Water | Karl Fischer titration | 22.0–26.5% | pH (5% suspension) | Potentiometry | 4.0–7.0 | Particle size | Sieve analysis | ≥95% through 80 mesh | Bulk density | Cylinder method, poured or tapped as stated | 0.50–0.85 g/mL | Heavy metals | ICP-MS or ICP-OES, as stated | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and enrichment | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent The microbiology block reports aerobic plate count, yeast and mould, E. coli and Salmonella. The limits are agreed in the specification before the lot is tested, not selected after the result is known. ## What 11.3–11.8% is measured against The magnesium range describes the powder as it is packed. It is not a purity percentage or a dried-basis result. The catalogue formula, C₄H₁₀MgO₈, has a molar mass of about 210.4 g/mol; magnesium contributes 24.3 g/mol, so the theoretical fraction is about 11.6%. The specification range is drawn around that number, and the water is part of the same formula mass. That is why 11.5% magnesium is not a low grade. The 98% or 99% figure that appears in quotations usually refers to the salt content, not to the metal. The two numbers answer different questions. A quotation that offers “99% magnesium malate” without an elemental magnesium figure has not told the buyer what the label can declare. The water figure is 22.0–26.5% by Karl Fischer. It is a range rather than a maximum because the hydrate is the product. A lot at the low end of the water range will read a little higher on magnesium than a lot at the high end, even when both are the same salt. If a certificate reports magnesium on a dried basis, that has to be stated on the same page: the as-is and dried-basis figures are not interchangeable, and the dried figure for this material would sit near 15% rather than near 11.5%. ## Release limit and batch result A release limit is the window the lot must fall inside; the result is the number the bench obtained for that lot. The certificate should show both, with the method beside each. “Passes specification” is a conclusion, not a result; the buyer cannot audit it and cannot compare it with the next lot. Water is the line that is most often misread. Here it is a two-sided range because the hydrate has to be present. A result below the range is not a cleaner lot; it may be a drier hydrate or a different hydrate, and the magnesium figure will have moved with it. A result above the range points to surface moisture or a drying step that stopped early. Neither is automatically a rejection; both need the batch record. The method matters as much as the number. EDTA titration measures total magnesium and says nothing about the anion. Karl Fischer measures water specifically; a loss-on-drying result at 105 °C can remove water of crystallisation as well as surface moisture, and the figure depends on the method conditions. A certificate that reports loss on drying instead of Karl Fischer water is not necessarily wrong, but the two results cannot be compared without the method. ## What moves between lots The magnesium assay follows the neutralisation and crystallisation steps. The malate comes from the DL-malic acid used, and a change of acid source is a change of supplier file even when the assay stays inside the range. Water follows the crystallisation and drying steps and is the most variable figure on the sheet. pH follows the residual acid or alkali in the liquor. Particle size and bulk density follow milling and sieving. Colour is the least quantitative signal and often the first useful one. A cream or grey tint can point to a hot drying step, an iron trace or a shift in the malate source. The assay may still pass. The tint is a cue to check the batch record. ## When a second laboratory earns its place Order an outside test when the material comes from a new source, on the first shipment into a regulated market, when the label's form claim is not proved by the certificate, or when a result is disputed. Do not order a photocopy of the supplier's certificate. Order the few tests that settle the point in doubt: EDTA or ICP for magnesium, the malate reaction plus an infrared spectrum, Karl Fischer water, an XRD check for crystalline magnesium oxide, and ICP-MS for the metals panel on that sample. An outside laboratory is also the practical way to resolve a disagreement. Send the retained sample, the specification and the supplier's certificate, and ask for the tests that distinguish the salt. ## What to compare between suppliers Line up six facts before comparing quotations: the salt and hydrate, the magnesium figure and its method, the water figure and its method, the malate identity reference, the mesh and bulk density, and the presence or absence of an oxide screen. Two certificates can agree on 11.5% magnesium and disagree on the other five, and then they are not describing the same material. The second layer is traceability. The certificate lot, the drum lot and the retained-sample lot should match. An accurate certificate can still belong to a drum that never reaches you. The catalogue line behind this page is on the magnesium malate product page. The salt choice is set out on the grade comparison page, the tests that separate the malate from a blend are on the identity page, and the assay itself is described in the EDTA titration method entry. The release workflow sits on the quality page. ### 02 Magnesium malate or citrate: choosing a magnesium salt URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-malate/grades/ Reviewed: 2026-11-18 Magnesium malate and magnesium citrate are both permitted magnesium sources, but they are different salts with different formula masses, different water and different weights per milligram of magnesium. The malate line here is a hydrated DL-malate at 11.3–11.8% magnesium; the citrate line is the anhydrous salt at 14.5–16.4%. The choice is settled by the dose, the dosage form and the label before it is settled by the name on the quotation. In one lineMalate and citrate differ in magnesium per gram and in water, so the same milligram dose of magnesium needs a different weight of each salt. ## Why the salt is a separate decision The label names the salt, and the nutrition panel declares the elemental magnesium. Those are two different statements. A formulator who fixes the elemental magnesium first and chooses the salt afterwards has left the fill weight, the ingredient list and the certificate to be worked out at the end, which is the wrong order. The salt also carries its own hydrate. Magnesium malate is supplied as a hydrated powder with 22.0–26.5% water by Karl Fischer. Magnesium citrate can be anhydrous or a nonahydrate form, and the two citrate grades carry very different magnesium figures. “Citrate” on its own is not a specification, and neither is “malate” without the hydrate. Once the salt is fixed, the grade inside that salt is the next decision: the standard 80 mesh powder, a granulated version for flow, or a milled 100 mesh for a finer mouthfeel. The grade changes the process, not the label. ## The two salts side by side Catalogue comparison · magnesium malate and anhydrous magnesium citrate | Property | Magnesium malate | Magnesium citrate, anhydrous | Formula | C₄H₁₀MgO₈ | C₁₂H₁₀Mg₃O₁₄ | CAS | 869-06-7 | 3344-18-1 | Magnesium | 11.3–11.8% (complexometric EDTA) | 14.5–16.4% (complexometric EDTA) | Water | 22.0–26.5% (Karl Fischer) | ≤2.0% (loss on drying) | pH (5% suspension) | 4.0–7.0 | 5.0–8.0 | Particle size | ≥95% through 80 mesh | ≥95% through 40 mesh | Bulk density | 0.50–0.85 g/mL | 0.50–0.80 g/mL | Solubility in water | Sparingly soluble; soluble in hot water | Soluble The table is a catalogue comparison. A real lot sits somewhere inside its range, and the certificate for that lot is the only document that says where. ## What the water and the powder do The malate carries roughly a quarter of its mass as water. That water is part of the crystal, not a contaminant, but it is still mass that is not magnesium. The anhydrous citrate carries almost none, which is why a gram of citrate delivers more magnesium than a gram of malate. If the citrate is bought as the nonahydrate, the picture changes again: that grade carries about 26% water and about 11.9% magnesium, so it lands close to the malate on both counts. Bulk density and particle size decide how the powder runs. The malate standard is 80 mesh and 0.50–0.85 g/mL; the citrate standard is 40 mesh and 0.50–0.80 g/mL. A capsule line that fills by volume will see the difference as a fill-weight change even before the magnesium figures are compared. A granulated malate flows more freely but may bring a binder that must appear on the label; a 100 mesh malate is finer and can dust more. Solubility separates the two in the stick pack and the drink mix. The citrate dissolves readily; the malate is sparingly soluble in cold water and soluble in hot water, so a clear cold drink is an easier fit for the citrate, while a suspension or a hot-process format suits the malate. Taste is a matrix question: the malate brings a malic acid note and the citrate a citric one, and either can be masked or can dominate depending on the flavour system. ## What the dosage form allows A 100 mg magnesium dose needs about 870 mg of malate powder at 11.5%, or about 650 mg of anhydrous citrate at 15.5%. A size 0 capsule holds roughly 350–600 mg of a powder across these densities, so the malate dose is a two-capsule fill before excipients, while the citrate may fit a single larger capsule or two smaller ones. That arithmetic, not a preference, is what decides whether a one-capsule claim is possible. In a stick pack or a drink mix, the citrate has the solubility advantage and the malate has the suspension advantage. In a gummy or a chew, the water activity and the sugar system dominate, and the malate’s own water has to be counted in the water budget. In a tablet, the 80 mesh malate and the 40 mesh citrate both compress, but the flow and the fill weight differ, and a granulated grade may be needed to keep weight variation inside the limit. The dosage form can make one salt impractical even when both are permitted and both can declare the same elemental magnesium figure. That is a process finding, not a regulatory one. ## What to write into the specification - The salt and the hydrate: “magnesium DL-malate dihydrate” or “magnesium citrate, anhydrous”. - The magnesium range and the method: “11.3–11.8% by complexometric EDTA” or “14.5–16.4% by complexometric EDTA”. - The water: “22.0–26.5% by Karl Fischer” or “loss on drying ≤2.0%”. - The identity: “malate reaction and IR conform” or “citrate reaction and IR conform”. - The physical grade: mesh, bulk density, granulated or milled. - The negative clauses: no added magnesium oxide, no added citrate or malic acid, no carrier unless declared. Switching salt is a new specification, not a line edit. It brings a new certificate, a new fill weight, a new label, a new stability file and usually a new supplier file. The label arithmetic is worked through on the malate versus citrate page. ## When not to switch Do not switch if the current salt is already validated in the finished product and the label is set. Do not switch to solve a flow problem before the mesh and the bulk density have been checked: the problem may be the grade, not the salt. Do not switch on a quotation alone; the powder weight per dose, the water and the label all move together. And do not switch without a stability study on the new salt in the new pack. If the label already names magnesium malate, the citrate is a different product, even if the elemental magnesium figure is the same. If the label names only “magnesium” and the ingredient list is still open, the comparison is worth making before the first batch rather than after. The catalogue line for the comparison salt is on the magnesium citrate hub. The identity tests for each salt are on the malate identity page, the label rules are on the compliance page, and the malate specification itself is on the product page. ### 02.1 Magnesium malate vs citrate: magnesium content, water and the label URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-malate/grades/malate-vs-citrate/ Reviewed: 2026-11-18 The malate and the citrate are both magnesium salts, but a label that switches from one to the other changes the weight of powder behind the same milligram of magnesium. Magnesium malate carries 11.3–11.8% magnesium in a hydrated powder; anhydrous magnesium citrate carries 14.5–16.4%. That is about a third more malate powder for the same dose, before the hydrate of the citrate is even named. In one lineThe same 100 mg of magnesium needs about 870 mg of malate powder but about 650 mg of anhydrous citrate, and the label has to name which salt and which hydrate were weighed. ## Two salts, two magnesium figures Magnesium malate is the magnesium salt of DL-malic acid. The catalogue formula is C₄H₁₀MgO₈, the molar mass is about 210.4 g/mol, and magnesium is about 11.6% of the molecule. The specification range is 11.3–11.8% by complexometric EDTA, measured on the powder as it is packed. Magnesium citrate is a different salt with a different formula, C₁₂H₁₀Mg₃O₁₄, and three magnesium ions for every two citrate ions. The anhydrous salt has a molar mass of about 451 g/mol and a theoretical magnesium fraction of about 16.2%; the catalogue range is 14.5–16.4%. The nonahydrate carries about 11.9% magnesium, which is close to the malate figure. That last number is why the comparison has to name the citrate hydrate. “Malate versus citrate” is not one comparison. Against the anhydrous salt the salt weight moves by about a third; against the nonahydrate it barely moves at all. ## Water is mass, not a rounding error The malate carries 22.0–26.5% water by Karl Fischer. The water is part of the crystal, and it is the reason the magnesium figure is 11.5% rather than the 15.5% of the anhydrous salt. The anhydrous citrate carries almost no water, with a loss on drying of ≤2.0%. The citrate nonahydrate carries about 26% water and lands near the malate on both water and magnesium. Water is mass that is not magnesium. A powder with a quarter of its weight in water needs more powder per milligram of the metal, and a label that counts the salt weight rather than the elemental weight will overstate what the capsule delivers. The water figure and the magnesium figure have to come from the same lot and the same certificate. There is a specification check inside this point. The hydrate name and the water range have to tell the same story. If a supplier's name and water result point to different hydrates, ask for the batch record and settle it before the specification is signed. ## The arithmetic per dose Salt weight per 100 mg of elemental magnesium | Salt | Magnesium | Salt per 100 mg Mg | Water | Magnesium malate | 11.3–11.8% | 847–885 mg (about 870 mg) | 22.0–26.5% by Karl Fischer | Magnesium citrate, anhydrous | 14.5–16.4% | 610–690 mg (about 650 mg) | ≤2.0% loss on drying | Magnesium citrate, nonahydrate | About 11.9% | About 840 mg | About 26% Read the same table from the other direction. A 1,000 mg scoop of malate delivers 113–118 mg magnesium; a 1,000 mg scoop of anhydrous citrate delivers 145–164 mg. The citrate is the richer source of the metal per gram, and the malate is the bulkier one. Capsule fill follows the arithmetic. A size 0 capsule holds roughly 350–600 mg of a powder across these densities, so a 100 mg magnesium dose from the malate is a two-capsule fill before excipients, while the anhydrous citrate may fit a single larger capsule or two smaller ones. These are calculations from the specification, not batch results. ## What the label has to change In the European Union, Annex II of Directive 2002/46/EC names the permitted magnesium source, and the ingredient list has to use that name. Magnesium malate and magnesium citrate are separate entries, and a switch from one to the other is a change to the ingredient list even if the elemental magnesium stays the same. The nutrition declaration states magnesium in milligrams and as a percentage of the 375 mg reference intake for adults. The arithmetic is visible on the label. A 1,000 mg malate dose at 11.5% delivers about 115 mg magnesium, or about 31% of the reference intake. A 1,000 mg anhydrous citrate dose at 15.5% delivers about 155 mg, or about 41%. If the brand keeps the same salt weight and changes the salt, the elemental figure and the percentage both move. If the brand keeps the same elemental figure, the salt weight and the capsule fill move instead. On a US label, the Supplement Facts box gives elemental magnesium against a 420 mg Daily Value for adults and children aged four and over; the ingredient list gives the salt. The same 115 mg is about 27% of the Daily Value; the 155 mg is about 37%. The hydrate name belongs in the ingredient list where the market requires it, and the certificate has to match the name that is printed. ## When each salt fits The malate fits when the label names malate, when the capsule or stick has room for the larger powder weight, and when the hydrated powder’s flow and taste have been trialled in the matrix. It also fits a suspension or a hot-process format better than a clear cold drink, because the salt is only sparingly soluble in cold water. The anhydrous citrate fits when the magnesium per gram has to be higher, when the fill weight is the constraint, or when a clear solution is the format. The nonahydrate is a different proposition again: it carries water and magnesium close to the malate, so a supplier who quotes “citrate” without the hydrate has not quoted a comparable material. Neither salt is a drop-in substitute for the other in a validated formula. The fill weight, the water, the taste, the label and the stability file all move together, and the certificate has to name the new salt before any of them can be signed off. ## What a switch has to rewrite - The salt and the hydrate in the specification and on the label. - The magnesium range and the method, on an as-is basis. - The water limit and the method: Karl Fischer for the malate, loss on drying for the anhydrous citrate. - The mesh, the bulk density and the capsule fill weight. - The identity tests and the reference spectra. - The stability study, in the new pack and the new matrix. The malate specification is on the product hub; the wider salt comparison is on the grade page; the tests that prove the malate are on the identity page; the label rules are on the compliance page. The comparison salt is on the magnesium citrate hub, and the assay method is described in the EDTA titration entry. ### 03 Magnesium malate is stable dry; the hydrate and the matrix decide the rest URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-malate/stability/ Reviewed: 2026-11-18 Magnesium malate arrives as a hydrated crystalline powder, with 22.0–26.5% water written into the specification. That water is part of the salt, not a packing fault, but it is also the part most likely to move after the liner is opened. Storage problems show up as caking and flow loss; formula problems show up as haze, colour or a pH shift, and the two are easier to separate when the powder and the finished dose are studied on their own. In one lineThe dry salt keeps in a sealed pack; the water it already carries, the pH of the matrix and the pack decide whether it still flows and assays at the end of the shelf life. ## The sealed drum A sealed 25 kg fiber drum with an intact food-grade liner is a stable package at ambient temperature. The salt is ionic and crystalline; the magnesium assay has no route to drift while the pack stays closed. The risk arrives with the first opening, when the powder meets the room. The 22.0–26.5% water is mostly water of crystallisation. It is not free liquid, but it can exchange with the air. In a damp room the powder picks up surface moisture, and the signs are caking, slower flow and bridging above the hopper. In a very dry room the exchange can reverse, and a crystal that loses water is no longer the same hydrate. The specification range is a window, not a target to beat by extending the drying step. Karl Fischer is the figure to watch, because it measures water rather than total volatiles. A lot at the low end of the range can climb in storage, and a lot in a dry store can fall. The hydrate entry and the loss-on-drying entry explain why the two tests are not interchangeable. Light is not a practical concern. A tint that develops in storage points to moisture, a trace metal or a drying step, and it is worth a look at the batch record. ## pH, cations and heat A 5% suspension reads pH 4.0–7.0. The figure comes from the salt itself: malate is the base form of a weak acid and buffers the water around its own pH. In a formula, the surrounding pH pushes the equilibrium. As the matrix drops below about pH 3.4, malate picks up protons and the magnesium is released as the free ion. Solubility rises, the taste sharpens, and the acid system has to be chosen on purpose. As the matrix rises above about pH 9, magnesium can come out as the hydroxide, which reads as haze or sediment rather than as a lower assay. Other divalent cations are the second variable. Malate can associate with calcium, iron and zinc, so a clear drink that carries both the malate and a calcium salt may not stay clear. Iron can move the colour. Heat speeds up the exchange and any browning from a reducing sugar. Test at production pH, with the full mineral load and the real process temperature; a room-temperature solubility check will not predict the matrix. ## What moves the figure Stability factors · magnesium malate in storage and in formula | Factor | Effect | Control | Moisture gain | Caking, slower flow, higher Karl Fischer water | Sealed liner, dry store, desiccant | Moisture loss | Dehydration, phase change, dust | Keep the drying step fixed; control store humidity | pH below 3.4 | Protonation, sharper taste, free magnesium | Choose the acid level; taste the matrix | pH above 9 | Haze or sediment as magnesium hydroxide | Keep the matrix buffered, away from alkaline pH | Calcium, iron or zinc | Association, haze, colour shift | Separate the minerals or design a cloudy format | Heat | Faster exchange, browning with reducing sugars | Cool the process; hold water activity | Pack | Moisture vapour transfer, odour transfer | Sticks need foil; drums need a sealed liner ## Two studies The powder study uses the commercial pack and two conditions: 25 °C/60% RH and 40 °C/75% RH. Pull samples at 0, 2, 6, 12 and 24 months and test magnesium, water, pH, appearance, mesh and microbiology. The warmer condition is there to make a trend visible within the study window; it is not a storage instruction. The finished-dose study is separate. Capsules, tablets, sticks or gummies go into 30 °C/65% RH and 40 °C/75% RH, and the endpoints are magnesium, moisture, colour, taste and, where the form needs it, dissolution or disintegration. A powder can pass while the dose fails, so both files are needed. ## The pack and the matrix For a capsule or tablet, the threats are moisture and the excipient list. In a direct-compression blend, choose a lubricant that carries no water, and protect a moisture-sensitive powder with a sealed blister or a tight HDPE pack and desiccant. Water-based granulation is possible if the drying step is validated against the water range. A stick pack lives or dies on its laminate. Start with a foil structure, heat-sealed and chosen for a low moisture-vapour transmission rate; a paper or clear pack is a retail choice that needs data behind it. In a gummy or chew, the sugar system, water activity and pH dominate, and the malate's water has to be counted in the water budget. In a drink, pH and preservative system come first; the malate is easier to run as a suspension or a hot process than as a clear cold solution. ## The date comes from the data No shelf-life figure is attached to the molecule. The period is the one the study justifies for that grade, that pack and that matrix. The technical data sheet states the storage condition and whether the number is a retest period or an expiry date. A bulk ingredient that is checked again before use usually carries a retest period; a consumer pack carries an expiry date. Where the data stop short of the pack, matrix or climate, shorten the period or run another study. One re-test of an old lot does not create a new shelf life. The COA page lists the parameters to follow, the ordering page lists the packs a study has to cover, and the quality page describes the records. The catalogue line is on the product page. ### 04 Magnesium malate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-malate/moq/ Reviewed: 2026-11-18 The first magnesium malate order is usually a qualification pack rather than a production run: one kilogram from a released lot, with the matching certificate inside the carton. The 25 kg fiber drum is the production unit. Once the specification and the purchase order are fixed, the indicative lead time is one to seven days. In one lineOne kilogram qualifies the grade from a released lot; the 25 kg drum is the production pack, and the quotation is built from salt, quantity, dosage form and destination. ## What one kilogram is for A kilogram is a working quantity. It covers a bench trial, a small capsule or tablet batch and the first weeks of a stability pilot, and it comes from a lot that has already been released. The buyer is not testing a promotional sample; the buyer is testing the material that a pallet will contain. That is why the pack is drawn from a released lot rather than from a retention cabinet. The minimum is really a documentation unit. One kilogram can be packed, labelled, certified and retained without setting up a batch that exists only for the trial. Above that, packing follows one lot while its size allows. Once the quantity exceeds the lot, a fresh lot and a fresh certificate are created. The hydrate, mesh and bulk density belong in the sample request. A trial on the 80 mesh powder will not predict a granulated or 100 mesh run, and a kilogram of the wrong grade is not a cheaper way to learn that. ## Packaging Standard packs · magnesium malate | Pack | Use | Notes | 1 kg foil pouch | Trial and bench scale | Heat-sealed liner; lot and certificate marked on the pouch | 25 kg fiber drum | Routine production | Sealed liner; tamper-evident ring | Pallet | Container or pallet load | Stretch-wrapped; labels outward The liner does the work in a fiber drum. If it is not sealed, the powder has been stored under different conditions from the ones on the certificate, and the certificate will not show it. A humid destination is worth mentioning at order stage: a desiccant can be added and named in the packing specification. The same applies to a long sea freight, where the liner and the desiccant are chosen for the journey as well as for the warehouse. Each pouch and drum carries the product and hydrate, the lot, the certificate number, the net weight and the storage instruction. Without the lot number, the pack cannot be tied to a certificate, a retained sample or a stability file. ## When the clock starts One to seven days is measured from the point where the specification, quantity, packing and documents are agreed together. An enquiry that has not settled the specification is still an enquiry; the clock has nothing to start from. Five requests add time: a 100 mesh milling run, a granulated version, an outside test, a document pack for the destination, and a label language that has to be checked. Each is manageable if it is named in the first message. The quotation can then show the added days separately. ## Six inputs to a quotation The reply is only as good as the brief. Six details make it specific: - The salt and hydrate, or a specification to match. - The first quantity and an annual estimate. - The dosage form: capsule, tablet, stick, gummy or drink. - The destination and the documents it requires. - The mesh and bulk density the line can run. - The date the material has to be on site. A competitor's certificate can be more useful than a written specification at this stage, because it shows the methods and limits the quality team already accepts. Send it and the reply can say which lines can be matched and which cannot. Commercial terms follow the actual order, since packing, freight and paperwork depend on the destination. An annual estimate helps even when the first order is small, because it tells the supplier which packing run the trial should sit on. ## Samples and trials Samples are 100–500 g from a released lot, with the certificate in the box, and normally leave three to five working days once the specification is fixed. Without a certificate the sample cannot be traced to a lot, and the trial cannot be repeated. Sample freight is quoted with the pack. The sample has to be the grade that will ship: the standard 80 mesh powder does not stand in for a milled 100 mesh or granulated grade, and one hydrate does not stand in for another. When the trial is there to qualify a process variant, order that variant. ## Terms and claims Payment terms, Incoterm and the document list are set in the order confirmation. Destination, order value and account history all change them, so each order confirmation carries its own set. A claim is resolved from the retained sample and the lot file. Report a damaged pack or a document mismatch as soon as it arrives, with photographs of the carton and label, before use. The certificate is described on the COA page; the salt and mesh choice is on the grade page; the quality page covers the lot record and the retained sample. The catalogue line is on the magnesium malate hub. ### 05 Where magnesium malate is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-malate/compliance/ Reviewed: 2026-11-18 A magnesium malate supplement is checked at four separate points before it can be sold: the source must appear on the market's permitted list, the finished dose must stay under the contaminant ceilings, the label must identify the salt that is in the drum, and the claim must be one the market allows. Clearing one point says nothing about the other three. In one lineA permitted magnesium source is the start of the file, not the end: the salt name, the hydrate, the contaminant sum and the label arithmetic each have to stand on their own. ## Four gates, four kinds of evidence The checks do not share a document. Permission is a listing question, contamination is an exposure calculation, labelling is a naming and arithmetic exercise, and claims are a legal category. A lot certificate can serve the first two and part of the third, but it cannot settle any of them by itself. What each market check asks for | Check | Question | Evidence | Permitted source | Is this exact salt on the list for this market? | The list entry, the supplier statement and the ingredient name | Contaminants | Does the finished serving stay under the ceiling? | The COA result multiplied by the salt's fraction of the finished serving | Label | Does the label name the salt and declare the right magnesium? | The certificate, the formula and the nutrition panel | Claim | Is the wording authorised or permitted? | The claim regulation or a substantiated structure/function file A list entry is not a purity certificate, and a passing certificate is not a label review. The four gates are separate because each one fails in its own way. ## European Union Directive 2002/46/EC Annex II is the EU positive list of vitamin and mineral sources for food supplements, and Commission Regulation (EC) No 1170/2009 added magnesium malate to it. The entry covers the simple salt. It does not cover every magnesium-malate ingredient on the market: a citrate-malate complex, for example, has its own novel-food authorisation and its own conditions. Three instruments sit under the entry. The member state notification is national; Regulation (EU) 2023/915 sets the contaminant ceilings; Regulation (EU) No 1169/2011 governs the label. Magnesium appears in the nutrition declaration in milligrams and as a percentage of the 375 mg reference intake. A 1,000 mg malate dose at 11.5% delivers about 115 mg, or about 31%. Claims are a fourth instrument. Regulation (EU) No 432/2012 authorises the magnesium claims and attaches conditions to each wording. The EU regulatory summary collects the texts in one place. ## United States and the United Kingdom US law recognises magnesium malate as a dietary ingredient within the DSHEA framework. There is no premarket approval step, but the seller must be able to explain why the ingredient is lawful for the use, and that explanation belongs in the supplier file. The Supplement Facts panel declares elemental magnesium against a 420 mg Daily Value for adults and children aged four and over; the ingredient list names the salt. California adds a separate exposure test. Proposition 65 is driven by the daily intake of lead and other listed substances, so a lot that passes the EU ceiling can still trigger a warning at a high dose. The Proposition 65 entry sets out the calculation. In the UK, the permitted-source list is a retained version of the EU list. Magnesium malate is on it, but the list is not automatically updated when the EU changes. The food supplement rules, the labelling rules and the retained contaminant limits apply alongside it; check the current UK text before the artwork is signed. ## The contaminant table The table gives the finished-product ceilings for the elements most often reported on a malate certificate. It is a starting point, not legal advice. Contaminant ceilings · food supplements, as of this review | Element | EU | US | UK | Lead | 3.0 mg/kg in the supplement as sold | No federal supplement limit; state rules apply | Retained limit; check current UK law | Cadmium | 1.0 mg/kg | No federal supplement limit | Retained limit | Mercury | 0.10 mg/kg | No federal supplement limit | Retained limit | Arsenic | No EU-wide figure; national rules vary | No federal supplement limit | Check current UK law The powder specification is not the finished ceiling. This salt is specified at Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg. Those figures apply to the powder, which is only part of the serving. A capsule in which the salt is 20% of the fill gives the other ingredients 80% of the mass to dilute its contribution; a stick pack that is mostly salt offers almost no dilution. Work out the salt's fraction of the finished serving, apply it to the raw result, and compare that with the ceiling before ordering. ## Claims EU claims for magnesium sit in Regulation (EU) No 432/2012. Each authorised wording comes with conditions, and a brand may use it only in that form. A structure/function statement is the US route: it must be truthful, substantiated and accompanied by the DSHEA disclaimer. Neither route reaches a disease, a symptom or a health outcome. This site does not make a health claim for magnesium malate. The pages describe the salt, the certificate and the rules; the claim is the brand's, and it is market-specific. A sentence such as “the malate form is used in capsules” describes the material and is not a health claim. ## The document pack - Lot certificate with the magnesium assay, malate identity, water and the contaminant panel. - Specification and technical data sheet naming the salt and its hydrate. - A 16-section safety data sheet. - Statements on allergens, GMOs, country of origin and solvent residues. - The US dietary-ingredient rationale, where the buyer needs it. - A third-party report, where the review or the destination asks for one. - A label proof checked against the certificate before it is printed. ## Before the first order - Does the destination list name this exact salt? - Does the certificate put magnesium and water on the same lot, with methods? - At the real serving, does the contaminant sum fit under the finished limit? - Do the declared milligrams and percentage match the salt and hydrate in the drum? - Is the claim authorised, or a structure/function statement with the disclaimer? - Are the US basis and the current UK text in the file? The certificate is described on the COA page; the proof of the salt is on the identity page; the catalogue line is on the product hub. Market notes are on the US and UK pages. ### 06 How we prove a magnesium malate lot is the malate URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-malate/identity/ Reviewed: 2026-11-18 Four measurements carry the identity of a magnesium malate lot: the EDTA magnesium assay, the malate reaction and infrared spectrum, the Karl Fischer water, and an X-ray diffraction pattern. Each one answers a different question, and none of them is sufficient alone. The lot is the malate when the four agree, on the same sample, with a mass balance that closes. In one lineThe magnesium assay proves the metal, not the salt: malate by reaction and infrared, the water by Karl Fischer and the mass balance have to agree on the same lot. ## A sequence of four measurements Identity layers · what each result proves and what it leaves open | Layer | Method | Question answered | What it leaves open | Metal | Complexometric EDTA titration | How much magnesium is present | Which salt or oxide supplied it | Anion | Malate reaction and infrared spectrum | Whether malate is present | Whether the malate is associated with the magnesium | Water | Karl Fischer titration | How much water the powder carries | Whether the water is surface moisture or crystal water | Crystal | X-ray diffraction | Which crystalline phases are present | Amorphous content and organic purity Titration comes first because it is the measurement every certificate carries. EDTA at about pH 10 binds the magnesium ion and reports total metal. That is a quantity, not an identity: magnesium oxide, magnesium carbonate, magnesium citrate and the malate all contribute to the same number. The anion is the second measurement. A chemical malate reaction is run against a reference, and the infrared spectrum is compared with a reference spectrum. The carboxylate and hydroxyl bands show that malate is present, but a mixture of malic acid and a magnesium salt could still produce a positive reaction. The result has to be read with the assay and the water. Water is the third measurement. Karl Fischer reports water specifically, and the 22.0–26.5% range is the hydrate's signature as much as the magnesium figure is. A water result outside the range changes the mass balance even when the magnesium stays inside its own range. The diffraction pattern is the fourth. It identifies crystalline phases, including a crystalline magnesium source that the wet chemistry cannot see. The four results are one identity when they agree; separately they are four data points. ## The 1:1 ratio and the mass balance Magnesium malate has one magnesium ion for each malate ion, because both carry two charges. The catalogue formula, C₄H₁₀MgO₈, has a molar mass of about 210.4 g/mol, and magnesium is about 11.6% of that mass. The rest is malate and water in a fixed proportion. That fixed proportion is the check to run first. If a certificate reports 11.5% magnesium, the water has to be inside the hydrate range and the malate has to account for the balance. A lot at 11.5% magnesium with 12% water has a mass-balance gap: the missing mass is neither metal nor declared water, and the likely causes are another magnesium salt, a filler or a different hydrate. The upper limit is a useful ceiling. Magnesium oxide carries about 60.3% magnesium, so a fraction of a percent of oxide moves the assay from the middle of the range to the top. A result above 11.8% cannot be this hydrate, and a result at the top of the range with a low water figure deserves a second look rather than a celebration. ## Diffraction and the infrared spectrum Diffraction is the phase test. A crystalline magnesium oxide fraction has its own pattern, and a report is only useful when it names the detection limit and the sample preparation. The same technique can show a change of hydrate, because the lattice changes when the water content changes. Infrared spectroscopy reads bonds rather than lattices. The carboxylate region and the hydroxyl band form a pattern to hold against a reference lot. The FTIR and XRD method entries describe what each technique can see. Neither test measures chemical purity. A phase-pure malate can still carry lead or cadmium, which is why the contaminant panel is run beside the identity work. If the label depends on the DL designation, add optical rotation; the routine panel does not include it. ## The routes worth testing Adulteration routes · magnesium malate | Added material | Why it appears | What moves | Test that shows it | Magnesium oxide | Lifts magnesium at a low addition | Magnesium high, water and malate low | Mass balance, XRD | Magnesium citrate | A similar white magnesium powder | Citrate reaction positive, IR differs | Citrate test, IR, magnesium figure | Malic acid | Raises the malate signal and acidifies | pH below 4.0, magnesium low | pH, mass balance, IR | Magnesium carbonate | Lifts magnesium and adds carbonate | Effervescence on acid, magnesium high | Acid test, XRD, mass balance | Another hydrate | Drying or hydration mismatch | Water outside 22.0–26.5%, magnesium shifted | Karl Fischer, XRD, batch record Oxide is the usual first suspect: a small addition raises the metal quickly, and the mass balance plus diffraction expose it. Citrate brings a different anion and a different infrared spectrum. Malic acid lifts the malate signal while pulling pH and magnesium down. Carbonate raises magnesium and fizzes on acid. The fifth route is paperwork rather than chemistry: a different hydrate supplied against this line. Read one test at a time and a blend can pass each of them. Read them together, on one lot, and the identity is the agreement between the numbers. ## How to write the specification - “Magnesium DL-malate dihydrate, CAS 869-06-7.” - “Magnesium 11.3–11.8% by complexometric EDTA, as-is basis.” - “Water 22.0–26.5% by Karl Fischer on the same lot.” - “Malate identity by reaction and infrared spectrum; reference standard named on the certificate.” - “pH 4.0–7.0; ≥95% through 80 mesh; bulk density 0.50–0.85 g/mL.” - “No added magnesium oxide, magnesium citrate, malic acid or carrier.” - “Optical rotation, where the DL designation is a label requirement.” The negative clauses matter: a range with no added-mineral clause leaves the door open, and an unwritten ban cannot be enforced. ## Five questions for a supplier - Which hydrate does the lot represent, and what water result does Karl Fischer give? - Which reference standard was used for the malate reaction and the infrared comparison, and can the spectrum be shared? - Was the magnesium result run on the powder as-is or after drying, and what water figure belongs to the same lot? - Has any magnesium oxide, magnesium citrate, malic acid or carrier been added after the reaction? - What is the XRD detection limit, and is a report available for the lot? Answers to all five describe a material that can be written into a purchase specification. An answer to the magnesium figure alone describes a number. Where each result sits on the certificate is covered on the COA page; the salt decision is on the grade page; the catalogue line these questions test is on the product hub. The same lot discipline is described on the quality page. ### 01 What the COA for magnesium taurate actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-taurate/coa/ Reviewed: 2026-11-18 A magnesium taurate lot is released on a certificate that carries the magnesium assay by complexometric EDTA on the dried basis, the taurate identity by reaction and infrared spectrum, loss on drying, pH, particle size, bulk density and the contaminant panel. The values here are catalog limits, not a batch result. The magnesium line is the one buyers read first and the least specific on the sheet: an oxide-and-taurine blend can be formulated to the same figure. In one lineThe magnesium assay measures the metal, not the salt; the taurate identity and the water are the lines that make the certificate specific. ## What the sheet carries The sheet follows the release specification. Every line should carry the method, the limit and the measured value; without the method the value cannot be checked. Release parameters · magnesium taurate, catalog specification | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Magnesium (dried basis) | Complexometric EDTA titration | 8.0–9.0% | Identification | Taurate reaction and infrared spectrum | Conforms to reference | Loss on drying | Gravimetric, USP <731> | ≤10.0% | pH (5% suspension) | Potentiometry | 5.0–7.0 | Particle size | Sieve analysis | ≥90% through 60 mesh | Bulk density | Tapped cylinder | 0.50–0.80 g/mL | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and selective media | APC ≤1,000 · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent Microbiology is a second block on the same certificate: aerobic plate count, yeast and mould, E. coli and Salmonella. The limits are set in the specification before release; they are not adjusted to fit the result. ## What “dried basis” means for this salt Dried basis connects the certificate to the drum. The anhydrous salt C₄H₁₂MgN₂O₆S₂ has a formula mass of about 272.6 g/mol; magnesium is 8.9% of that mass and the taurate is 91.1%. A catalog range of 8.0–9.0% says the powder is close to the pure salt, not that it is 98% pure. The assay is run on a dried sample, so the result is on the dried basis while the drum still contains water. At 9.0% magnesium and 10.0% water, the as-is figure is about 8.1%; at 8.0% and 10.0%, about 7.2%. That tenth of the figure is also a tenth of the label dose if the fill weight is calculated from the dried number. The certificate reports both for a reason. EDTA measures total magnesium, and other divalent metals consume the titrant unless they are masked. It cannot say which salt supplied the magnesium. The taurate reaction shows that taurine is present; the infrared comparison shows whether it is in the salt or beside it. A certificate with a reaction and no reference spectrum has proved less than it appears to. The catalog specification does not set a taurine assay. If the label needs a taurine figure, ask for an HPLC result and a calculated Mg : taurate ratio. That is an additional test, not a standard line on the sheet. ## Release limit versus batch result A limit is the gate; a result is the measurement. The certificate should show both with the method. A tick box that says “passes” is a verdict, not a measurement, and it gives the buyer nothing to compare between lots. Magnesium and loss on drying are read together. A lot at 9.0% with 3% water and a lot at 8.2% with 9% water both pass, but they do not deliver the same magnesium per gram. The pH window of 5.0–7.0 is narrow for a magnesium salt; magnesium oxide is alkaline, and a blend that carries it usually shifts the suspension up. A top-of-range pH is not a failure, but it is a reason to read the identity lines. The heavy-metal limits here are raw-material limits. The legal limits apply to the product as sold, so a raw-material result only makes sense beside the daily dose and the dilution. Arsenic is an internal limit because the European Union does not harmonise one for supplements. The microbiology limits are fixed in the specification and reported per gram. ## What changes between batches Water is the largest variable. Loss on drying follows the dryer and the crystal form; a lot at 3% and a lot at 9% both pass and behave differently in a hopper. The as-is magnesium, bulk density and caking follow the water. Particle size and density follow milling and sieving. The 60 mesh line is a floor, not a fixed number, and 0.50–0.80 g/mL is wide enough that two lots can feel like two materials on the press. pH follows neutralisation and washing; colour follows drying and trace iron. The taurate identity should not move. If the infrared match is marginal, ask for the spectrum and the reference, not another magnesium assay. A result above 9.0% on the dried basis deserves a question, because the pure salt is 8.9%. ## When an outside laboratory helps An outside laboratory earns its place when the supplier is new, when the first shipment enters a regulated market, when the label names the taurate, or when the certificate's identity section is thin. Do not ask for a photocopy of the supplier's panel; ask for the tests that settle the doubt: ICP-MS for the contaminant panel, XRD for crystalline magnesium oxide, FTIR against a taurate reference, Karl Fischer or loss on drying for water, and an HPLC taurine figure if the ratio is in doubt. Send the retained sample, the certificate and the specification, and ask for the discriminating tests. ## Comparing two offers Six lines belong side by side before anything else: the salt name and CAS number, the magnesium method and basis, the taurate identity method and reference, loss on drying and the as-is magnesium, pH with mesh and density, and the oxide screen. If two offers match on 8.5% magnesium and diverge on the other five lines, they describe different powders. Behind the certificate sits the batch record: who made the lot, which magnesium source, which drying step, and what the retained sample is. The three lot numbers — certificate, drum and retain — should be one number. The catalog data sit on the magnesium taurate product page. The identity tests are on the identity page, the salt comparison is on the grades page, and the EDTA method is set out in the complexometric titration note. The water figure is defined in the loss-on-drying entry. ### 02 Magnesium taurate or glycinate: choosing a magnesium salt URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-taurate/grades/ Reviewed: 2026-11-18 Magnesium taurate and magnesium bisglycinate are both 1:2 magnesium salts, and they deliver the same nutrient at very different masses. The taurate carries 8.0–9.0% elemental magnesium on the dried basis; the glycinate carries 13.5–14.2%. A formula that needs 100 mg of magnesium therefore needs about 1.1–1.25 g of taurate or about 0.70–0.74 g of glycinate, and that difference decides the capsule size, the tablet weight and the label. In one lineAt 8–9% magnesium, taurate needs about 1.6 times the powder of a 14% glycinate for the same dose, so the salt choice is a fill-weight decision before it is a label decision. ## The salt is the ingredient, the magnesium is the nutrient A label names the salt in the ingredient list and declares the magnesium in the nutrition panel. Those are two different statements, and a formula has to satisfy both. Magnesium taurate is the magnesium salt of taurine, Mg(C₂H₆NO₃S)₂, with a molar mass of about 272.6 g/mol. Magnesium bisglycinate is the magnesium salt of glycine, Mg(C₂H₄NO₂)₂, at about 172.4 g/mol. Both are 1:2 salts. The anion is most of the mass in each case, which is why the elemental magnesium percentage is a minority figure. In the taurate, magnesium is 8.9% of the anhydrous salt and the taurate is 91.1%. In the glycinate, magnesium is 14.1% and the glycinate is 85.9%. The catalog ranges sit around those figures. Neither salt is a generic “magnesium”, and a purchase order that names only the metal has not selected either one. ## The two salts side by side Magnesium taurate and magnesium bisglycinate · what changes | Salt | Mg, dried basis | Powder per 100 mg Mg | pH (5%) | Standard form | Watch | Magnesium taurate | 8.0–9.0% (EDTA) | 1,111–1,250 mg | 5.0–7.0 | 60 mesh; 0.50–0.80 g/mL | Low Mg; LOD ≤10.0%; hygroscopic | Magnesium bisglycinate | 13.5–14.2% (EDTA) | 704–741 mg | 8.5–11.5 | 40 mesh; 0.55–0.90 g/mL | Alkaline; free glycine; hydrate state The mass column uses the catalog range and no water correction. At the 10.0% loss-on-drying limit, the taurate figure rises to about 1,235–1,389 mg; at the glycinate's 8.0% limit, it rises to about 765–805 mg. The certificate for the lot is what the fill calculation should use, not the midpoint of a catalog range. ## What the powder does in the plant The taurate is specified at 60 mesh, with at least 90% passing a 250 µm sieve, and at a bulk density of 0.50–0.80 g/mL. The glycinate is a 40 mesh powder at 0.55–0.90 g/mL. Mesh is not a quality ranking. It is a flow, blending and dissolution decision, and a change of mesh is a change of process even when the chemistry is the same. The pH separates the two more sharply than the mesh does. The taurate suspension sits at 5.0–7.0, close to neutral; the glycinate sits at 8.5–11.5. In a blend with an acid-sensitive component, or in a stick pack where the powder is dispersed in water, that difference is part of the formulation. It is also a useful identity signal: a taurate lot that reads alkaline is a reason to ask what else the drum contains. Water is the third difference. The taurate limit is 10.0% loss on drying against 8.0% for the glycinate. The wider limit is not a licence to ship wet powder; it reflects a salt that tolerates water while its dried-basis magnesium stays in range. The as-is magnesium falls as the water rises, and the powder's flow and caking behaviour follow it. ## Dose, fill and capsule count Start from the elemental dose and divide by the magnesium fraction. For 100 mg of magnesium, the taurate needs 1,111–1,250 mg of powder and the glycinate needs 704–741 mg, before any excipient. Take a size 00 capsule, about 0.95 mL. A fill at 0.65 g/mL weighs about 620 mg; from the taurate that is roughly 50–56 mg of magnesium, and from the glycinate 83–88 mg. The taurate therefore needs two to three capsules for a 100 mg claim across the density range; the glycinate needs one to two. At 200 mg of magnesium the gap widens: 2.2–2.5 g of taurate against 1.4–1.5 g of glycinate. In a tablet, 1.1–1.25 g of taurate is already a large tablet before excipients, while 0.7–0.74 g of glycinate is a more usual weight. In a stick pack or sachet, 1–3 g of powder is normal, so the taurate mass fits more easily; the scoop size and the taste are the constraints there. These are planning figures, not fill-weight guarantees. The assay range, the water content and the bulk density of the lot all move the final number, and a press or capsule trial is what settles it. The taurate versus glycinate page works the arithmetic through dose by dose. ## Write the specification for the salt you are buying A specification copied from one salt onto the other will fail, and the supplier will be right to reject it. The magnesium range, the pH, the mesh and the identity test are all different. The specification should name the salt, the assay basis and the method, and it should say which tests prove the anion. - “Magnesium taurate, CAS 334824-43-0; magnesium 8.0–9.0% on the dried basis by complexometric EDTA.” - “Identification: taurate reaction and infrared spectrum conform to the magnesium taurate reference.” - “Loss on drying ≤10.0%; pH of 5% suspension 5.0–7.0; ≥90% through 60 mesh; bulk density 0.50–0.80 g/mL.” - “No added magnesium oxide, other magnesium salts or free taurine.” For the glycinate the equivalent lines are 13.5–14.2% magnesium, glycine 84.0–88.0%, a Mg : glycine ratio of 1.95–2.05, free glycine ≤1.0% and loss on drying ≤8.0%. A single “magnesium” specification cannot cover both, and a certificate that reports only magnesium cannot tell you which one you received. ## When switching is the wrong move A salt switch is a change control, not a substitution. If the capsule count is fixed and the label is approved, the taurate's extra mass may not fit, and the glycinate may be the practical choice. If the label names taurate, the reverse switch is a label change as well, even if the magnesium declaration stays the same. The label is part of the switch. In the European Union the ingredient list must name the salt and the nutrition declaration reports elemental magnesium in milligrams and as a percentage of the 375 mg reference intake; in the United States the Supplement Facts panel reports milligrams and a percentage of the 420 mg Daily Value. A new salt means a new ingredient name and a new calculation, not only a new drum. Do not switch for a claim. The authorised magnesium wording, where a brand uses it, is tied to the magnesium dose and the market's rules, not to the anion. The salt choice is a question of mass, pH, flow, dosage form and label, and it should be settled on those terms. A switch needs a new fill trial, a stability check, a new nutrition declaration and new artwork before the first production lot. The magnesium taurate product page carries the catalog specification. The magnesium bisglycinate page carries the other specification, and its grade page explains the hydrate variants. The label rules for both salts are on the compliance page. ### 02.1 Magnesium taurate vs glycinate: magnesium content, dose and the label URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-taurate/grades/taurate-vs-glycinate/ Reviewed: 2026-11-18 The label declares magnesium; the capsule carries the salt. Magnesium taurate is 8.0–9.0% magnesium on the dried basis and magnesium bisglycinate is 13.5–14.2%, so the same magnesium dose needs about 1.6 times the taurate powder. That difference shows up in capsule count, tablet weight, stick size and the nutrition panel. In one lineAt 8–9% magnesium against 13.5–14.2% for glycinate, taurate needs about 1.6 times the powder for the same dose, and that difference lands on the capsule count and the label. ## Two salts, two magnesium fractions Magnesium taurate is the 1:2 salt of magnesium and taurine. Its anhydrous formula is C₄H₁₂MgN₂O₆S₂ and its molar mass is about 272.6 g/mol. Of that mass, 24.3 g/mol is magnesium, or 8.9%, and the taurate is the other 91.1%. Magnesium bisglycinate is the 1:2 salt of magnesium and glycine, Mg(C₂H₄NO₂)₂, at about 172.4 g/mol. Magnesium is 14.1% of that molecule and the glycinate is 85.9%. Magnesium content of the two salts · calculated from the formula and checked against the catalog range | Salt | Formula | Molar mass | Mg, theoretical | Mg, catalog | Anion share | Magnesium taurate | C₄H₁₂MgN₂O₆S₂ | 272.6 g/mol | 8.9% | 8.0–9.0% | 91.1% taurate | Magnesium bisglycinate | C₄H₈MgN₂O₄ | 172.4 g/mol | 14.1% | 13.5–14.2% | 85.9% glycinate The catalog range is a release window, not a choice of hydrate. The taurate's low magnesium fraction drives the rest of this page. ## The dose calculation The mass of powder is the elemental dose divided by the magnesium fraction. At the midpoint of each range, 100 mg of magnesium needs about 1,176 mg of taurate or about 722 mg of glycinate. At the edges, the taurate runs from 1,111 to 1,250 mg and the glycinate from 704 to 741 mg. The taurate is always the heavier powder for the same claim. Powder mass needed for an elemental magnesium dose · midpoint of each catalog range | Elemental magnesium | Taurate at 8.5% | Glycinate at 13.85% | Extra taurate mass | 50 mg | about 588 mg | about 361 mg | about 227 mg | 100 mg | about 1,176 mg | about 722 mg | about 454 mg | 150 mg | about 1,765 mg | about 1,083 mg | about 682 mg | 200 mg | about 2,353 mg | about 1,444 mg | about 909 mg These are planning figures. The certificate's as-is magnesium is the number the fill calculation needs, and the taurate's loss-on-drying limit of 10.0% can move the as-is figure by about a tenth. A lot at 8.0% on the dried basis and 10.0% water needs about 1,389 mg of taurate for 100 mg of magnesium, not 1,250 mg. ## What it does to the capsule and the tablet A size 00 capsule holds about 0.95 mL. At 0.65 g/mL that is about 620 mg of powder, which carries roughly 50–56 mg of magnesium as taurate or 83–88 mg as glycinate. At 0.80 g/mL the same capsule holds about 760 mg, and the taurate figure rises to about 61–68 mg while the glycinate reaches about 103–108 mg. Density is part of the dose. For a 100 mg claim, the taurate needs two to three size 00 capsules across the 0.50–0.80 g/mL range. The glycinate needs one to two, depending on density. For 200 mg, the taurate needs three to six and the glycinate two to four. At the middle of the density range, expect four or five taurate capsules against three glycinate capsules for 200 mg; the dense end saves one of each. A tablet makes the same arithmetic visible in a different shape. A 100 mg taurate dose is a 1.1–1.25 g tablet before excipients; the glycinate equivalent is 0.70–0.74 g. A 1,000 mg tablet is already large for most products, so the taurate dose may need two tablets or a stick pack. In a stick or sachet, 1–3 g of powder is normal and the taurate mass fits more easily, but the scoop size and the taste still have to be trialled. ## The label arithmetic The panel carries the element, not the salt weight. In the European Union the declaration is in milligrams and as a percentage of the 375 mg reference intake; in the United States it is in milligrams and as a percentage of the 420 mg Daily Value. A 100 mg claim is 26.7% of the EU reference intake and 23.8% of the US Daily Value, whichever salt carries it. The salt name belongs in the ingredient list, and the two numbers are not interchangeable. The salt weight and the magnesium weight diverge at these percentages. One gram of magnesium taurate carries 80–90 mg of magnesium on the dried basis; one gram of magnesium bisglycinate carries 135–142 mg. A label that declares 1,000 mg of magnesium taurate and 100 mg of magnesium is internally inconsistent, because 1,000 mg of the salt can only carry 80–90 mg. The same 1,000 mg figure on a glycinate label would carry 135–142 mg. Taurine is part of the salt, not a separate nutrient dose. In the EU it has no reference intake and is not declared as a vitamin or mineral; in the US it has no Daily Value. If free taurine is added to the formula, it is a separate dietary ingredient and has to be declared as such. A label that lists “taurine” without saying whether it is bound or added has not told the buyer which material is in the drum. ## The regulatory frame EU food-supplement law permits both magnesium taurate and magnesium acetyl taurate: they appear in Part B of Annex II to Directive 2002/46/EC. Magnesium bisglycinate is on the same list. Great Britain carries the retained list in the Food Supplements (England) Regulations 2003, Schedule 2, as amended, and Northern Ireland applies the EU list. The permission is for food supplements; a fortified food or beverage is a separate route. The acetyl taurate is a different salt from the taurate. A certificate, specification or label that drifts between the two names is a compliance problem even though both are permitted. In the United States, magnesium taurate is sold as a dietary ingredient, and the file has to establish the DSHEA basis for the exact form: pre-1994 marketing, a GRAS conclusion, or a new dietary ingredient notification. The fact that magnesium is essential does not settle the status of a particular salt. Neither market permits a disease-related claim. An authorised magnesium claim, where it is used, has conditions attached, and the anion does not create a claim of its own. The compliance page sets out the four checks and the document pack. ## When each salt fits - Choose the taurate when the label names magnesium taurate and the format can carry 1.1–1.25 g per 100 mg of magnesium: sticks, sachets, large tablets or a multi-capsule dose. - Choose the glycinate when the capsule count or the tablet weight is the binding constraint and the label names magnesium bisglycinate. - Do not choose on the magnesium percentage alone. Compare the mass per dose, the as-is figure, the pH, the flow and the label space. - Regard a switch as a change control: new fill trial, new stability check, new nutrition declaration and new artwork. The salt comparison page covers the physical and specification differences, the magnesium bisglycinate page carries the other specification, and the magnesium taurate product page is the starting point for the catalog data. ### 03 Magnesium taurate is stable dry; moisture and the matrix decide the rest URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-taurate/stability/ Reviewed: 2026-11-18 Magnesium taurate is a crystalline powder that keeps its assay in a sealed pack at ambient temperature. The failures come from water, from the pH of the matrix and from heat: the powder is hygroscopic, its loss on drying can be as high as 10.0%, and a 5% suspension sits at pH 5.0–7.0. The shelf life is a property of the grade and the pack, not of the molecule. In one lineSealed and dry, the salt keeps; the open pack, the water content and the pH of the matrix are what set the shelf life. ## The dry powder and the water it carries In the unopened pack the salt is stable. The assay does not drift on its own, and the taurate identity is not the fragile part. The water content is. The loss-on-drying limit of 10.0% is wide because the salt can carry water and still meet the magnesium range on a dried basis. A lot at 9.0% magnesium on the dried basis with 10.0% water reports about 8.1% as-is; the same lot dried to 3.0% water reports about 8.7%. The drum weight is not the active weight. The powder is hygroscopic in an open pack. An opened liner in a humid room picks up water, and the change shows first in flow, then in bulk density, then in caking. A powder that flowed on the press during the trial can arch over the hopper after a damp weekend. The control is a sealed food-grade liner, a dry packing room and a desiccant where the climate requires one. The liner is part of the storage condition, not an accessory to the drum. Caking changes the mass that a scoop or a capsule fill takes, so it changes the dose. A caked lot can pass the assay on a dried sample and still be unusable in a stick pack. The specification should say how the powder is packed and stored, not only what it assays. ## In solution and in the matrix The salt dissolves in water, and the 5% suspension is slightly acidic to neutral at pH 5.0–7.0. In solution the magnesium and the taurate separate, and the magnesium is free to react with whatever else the formula contains. An acidic matrix keeps it soluble; an alkaline matrix can push it toward magnesium hydroxide or carbonate. Phosphate and carbonate salts can form insoluble magnesium salts and leave a sediment or a haze. The pH of the finished matrix is part of the stability question, not a taste detail. A neutral solution with no preservative is also a growth medium. A stick pack or a beverage needs a preservation system and a water-activity control, and the micro test on the raw material does not answer that question. Heat acts on the matrix more than on the salt. Browning is a matrix reaction: a reducing sugar, water and heat can brown the blend even when the salt is stable. Trial the matrix at its real pH, water activity and process temperature; a room-temperature solubility test answers less. ## What moves the result Stability factors · magnesium taurate powder and matrix | Factor | Effect | Control | Moisture | Higher loss on drying, caking, lower as-is magnesium, poorer flow | Sealed liner, desiccant, dry room | pH below 5 or above 7 | Solubility change, precipitation with phosphate or carbonate | Buffer the matrix; trial the pH | Heat | Browning, colour drift, faster matrix reactions | Lower process temperature, shorter dwell | Phosphate and carbonate | Insoluble magnesium salts, haze or sediment | Check compatibility; sequence the addition | Trace metals | Colour, catalysis of matrix reactions | Specify iron and copper limits | Pack | Moisture-vapour ingress, caking in storage | Foil laminate, sealed seam, drum liner The table is a starting point for a trial, not a substitute for one. A factor that is harmless in a capsule can be decisive in a beverage, and a factor that is decisive in a gummy may never appear in a dry blend. ## The stability protocol The bulk study keeps the powder in its sales pack at 25 °C/60% RH and 40 °C/75% RH, sampled at 0, 1, 3, 6, 12 and 24 months. Each pull is tested for magnesium, loss on drying, pH, taurate identity, appearance and microbiology. The 40 °C arm is a challenge, not a storage instruction; it reveals a trend inside the study window. A second study belongs to the finished form. The capsule, tablet, stick or gummy is stored at 30 °C/65% RH and 40 °C/75% RH, and checked for assay, water content, colour, taste, hardness or dissolution as the form requires. A passing powder does not guarantee a passing capsule. The buyer needs the finished-form result. Take a photograph at every pull. Colour is the earliest signal in most matrices, and a measured colour difference is easier to defend than a memory of the trial batch. Keep the retained sample with the raw data. ## Formulation and pack choice A capsule or tablet protects the powder; the remaining risks are water and the excipients. A direct-compression blend of a hygroscopic active needs a controlled room and a lubricant that brings no water. Granulation can improve flow, but the granulation aids have to be declared and the drying step has to be validated. In a stick pack, the laminate does the protecting. Start with a foil structure, a tight seam and a low moisture-vapour transmission rate; a clear or paper pack is a retail decision that needs its own data. In a gummy, the water activity, the pH and the sugar system set the outcome, and the salt's water load is part of the drying calculation. In a beverage, pH, preservative and clarity matter more than the powder grade, and a pasteurisation step has to be trialled with the actual matrix. Packaging and formulation should be developed together. A stable powder in a poor pack is a short shelf life, and a good pack cannot rescue a matrix that separates or browns. ## How the shelf life is set The shelf life comes from the stability data for that grade and that pack; it is not a standard figure. The data sheet records the storage condition and the retest or expiry window the study supports. Bulk material is usually given a retest period, a consumer pack an expiry date. The two are not interchangeable. Where the pack or the matrix is not covered, assign less time or run a study; do not extend the claim. The same rule applies to a change of pack supplier, a change of mesh or a new granulation: the old data belong to the old material. The COA page lists the release parameters; the ordering page lists the packs a study has to cover; the quality page shows the record-keeping. For the definitions behind the numbers, see the loss-on-drying entry and the bulk density entry. The product page carries the catalog specification and the pack options. ### 04 Magnesium taurate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-taurate/moq/ Reviewed: 2026-11-18 Magnesium taurate is sold from a 1 kg foil pouch and a 25 kg fiber drum, and the smallest order is one pouch. That pouch is drawn from a released lot and travels with that lot's certificate. Orders are confirmed against a specification, a quantity and a destination, and the standard lead time is one to seven days once those are fixed. In one lineOne kilogram from a released lot is enough to qualify the salt; production runs from the 25 kg drum, and a quotation needs six details. ## Why one kilogram is the floor One kilogram is a trial quantity, not a production quantity. It covers a bench batch, a short capsule or tablet run and a retain, and it is packed from a lot that has already been released rather than from a sample shelf. The buyer can test the material that will be scaled, with the paperwork for the same lot. At the 8.0–9.0% dried-basis range, a kilogram carries 80–90 g of the element before the water is counted. That is enough to check the fill, the flow and the taste, but not enough to launch a product. The minimum exists because a smaller pack could not carry a lot identity and a certificate of its own; it is not a volume threshold and it does not replace a written specification. Where the lot size permits, a larger order is packed from the same lot. If it does not, the order is split across lots and each drum carries its own certificate. The labels should make the split visible. ## Packaging Standard packs · magnesium taurate | Pack | Use | Notes | 1 kg foil pouch | Qualification and small runs | Food-grade liner, sealed, lot label, desiccant if needed | 25 kg fiber drum | Routine production | Two liners, tamper seal, lot label | Pallet | Export or bulk dispatch | Stretch film, labels outward, one lot per pallet Moisture is the reason the liner is specified. Magnesium taurate takes up water from the air, so the pack is part of the storage condition, not a wrapping. A humid destination can justify a desiccant; say so when ordering. The label should carry the name, CAS number, lot, net weight, storage condition and certificate reference. Non-standard packs and private-label artwork are possible. They are quoted as a packing project and should be settled before the lot is packed. ## Lead time Standard lead time is 1–7 days from order confirmation. The count starts when the specification, quantity, pack and documents are settled; an inquiry alone does not start it. A custom mesh, a granulation step or an outside test extends the schedule, and the quotation separates that extension from the standard lead time. Three things commonly move the date: a specification revised after the order, a document requested late, and a destination that needs an import test or licence. Putting them in the first message avoids a second round. Shipping cut-offs and public holidays are outside the production schedule and should be checked against the required delivery date. ## The six details a quotation needs - The material and the specification: magnesium taurate, CAS 334824-43-0, the magnesium basis, mesh and bulk density. - The opening quantity and the annual forecast, so the lot can be reserved against the right pack size. - The pack: 1 kg pouch, 25 kg drum, or a private-label format with artwork and label content. - The destination and its document set: certificate, technical data sheet, safety data sheet, allergen, GMO and origin statements. - The dosage form and process: capsule, tablet, stick or blend, with any fill, flow or density limit. - The test package: third-party verification, an XRD oxide screen, a taurine assay, or a method specified by the customer. Send a competitor's certificate if you have one. It shows the methods and limits you expect, and it is a faster brief than a blank specification. The reply will state what can be matched and what cannot. Each of the six answers removes a question from the quotation. ## Samples and the qualification pack The 1 kg pouch is the qualification sample and the smallest order. It is filled from a released lot, carries that lot's certificate and matches the lot number on the drum. A sample without a certificate is a demonstration, not a qualification. If the trial calls for 80 mesh or granulated material, order that form. Testing the catalog 60 mesh answers a different question. Keep part of the pouch as a retain so the production drum can be compared with the approved sample. Shipping for the sample is quoted with it. The certificate travels with the sample; a generic data sheet does not replace it. ## Terms and claims Payment terms, Incoterm and documents are confirmed in the quotation. They vary with destination, order size and whether the account is new, so they are not fixed on the website. The quotation also states the shelf life at dispatch and the storage condition the buyer must maintain. Damage and discrepancies are handled against the retain and the lot certificate. Photograph the pack and the lot label on receipt, and quote the lot number, so the report can be tied to the batch record. An identity question and an appearance question need different evidence; the retain serves both. The COA page sets out the certificate; the stability page covers the pack and liner; the quality page shows how the lot file is kept. The MOQ entry defines the term, and the lead-time entry describes how the clock is counted. ### 05 Where magnesium taurate is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-taurate/compliance/ Reviewed: 2026-11-18 Magnesium taurate is a permitted magnesium source for food supplements in the European Union and in Great Britain, and it is marketed as a dietary ingredient in the United States. Permission is only the first of four tests. The contaminant limit, the label and the claims each have their own rule and evidence, and the US file has to establish the dietary-ingredient basis rather than assume it. In one lineA permitted form is only the first test: the contaminant limit, the label and the claim each need their own evidence in every market. ## The four checks Check one is the list of permitted forms. Check two is the contaminant limit, which applies to the finished product as sold, not to the raw material. Check three is the label: the ingredient name, the magnesium declaration and the required warnings. Check four is the claim: a health claim, a structure/function statement and a disease claim each follow a separate rulebook. A form that passes the first check can fail the other three. A label that is lawful in one market is not automatically lawful in another, and a certificate that satisfies a buyer is not a permission. Each check needs its own document. ## European Union Directive 2002/46/EC, Annex II, Part B lists magnesium taurate among the magnesium forms permitted in food supplements; magnesium acetyl taurate is listed separately. The two names are different salts, and the specification, certificate and label have to use the name of the material in the drum. The Annex is amended from time to time, so check the consolidated text as of the shipment date. The permission covers food supplements. A fortified food or beverage is a separate route under Regulation (EC) No 1925/2006, with its own list. Within the supplement route, the Member State notification, the labelling rules in Directive 2002/46/EC and Regulation (EU) No 1169/2011, and the contaminant limits in Regulation (EU) 2023/915 all apply. The label names magnesium taurate in the ingredients and declares magnesium in milligrams and as a percentage of the 375 mg reference intake. Taurine has no reference intake and is not a vitamin or mineral in the declaration; if free taurine is added, it is a separate ingredient. The label also names the product as a food supplement, gives the portion, warns against exceeding the stated daily dose, warns to keep the pack away from children, and states that the product does not replace a varied diet. ## United States The US route is the dietary-supplement route: magnesium taurate is marketed as a dietary ingredient under DSHEA. The ingredient has to be lawful for its use, and the file should state the basis: marketing as a dietary supplement before 15 October 1994, a GRAS conclusion, or a new dietary ingredient notification filed at least 75 days before marketing. Magnesium is an essential nutrient, but that does not by itself establish the status of a particular salt. There is no premarket approval of a supplement or its label. The firm is responsible for safety and labelling, and the Supplement Facts panel declares magnesium in milligrams and as a percentage of the 420 mg Daily Value. The ingredient line names magnesium taurate as the source. Taurine has no Daily Value; if free taurine is added, it is a separate dietary ingredient with its own line. A structure/function statement needs substantiation and the DSHEA disclaimer; a disease claim is not available. A conventional food or beverage is a different route: a supplement ingredient is not automatically a food ingredient, and GRAS status or a food additive regulation would be needed. ## The contaminant table Maximum contaminant levels · supplements | Market | Lead | Cadmium | Mercury | Arsenic | EU | 3.0 mg/kg, as sold | 1.0 mg/kg | 0.10 mg/kg | Not harmonised; Member State rules | US | No supplement-specific federal limit; state law and Prop 65 | No supplement-specific federal limit | No supplement-specific federal limit | No supplement-specific federal limit | UK | Retained EU figure; verify GB text | Retained EU figure | Retained EU figure | Verify GB text The raw-material specification of Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg is a purchaser's control. The EU limits apply to the finished product, so a raw-material result has to be judged against the daily dose and the dilution. A 1.2 g daily dose at the 3 mg/kg lead limit carries about 3.6 µg of lead, above the 0.5 µg/day Proposition 65 maximum allowable dose level. A product inside the EU limit can therefore still need a California warning. Check the destination and the dose together. In Great Britain the permitted-forms list is the retained Annex II list, and it carries magnesium taurate and magnesium acetyl taurate. Northern Ireland applies the EU list under the Windsor Framework, and the retained contaminant limits apply in Great Britain; check the current GB text for the shipment date. ## Where the claim boundary sits In the European Union, Regulation (EU) No 432/2012 sets the magnesium claims that may be used, with fixed wording and conditions for each. For a source-of claim, the daily portion must supply at least 15% of the 375 mg reference intake, which is 56.25 mg. A claim that is not on the register cannot be used, and the anion creates no claim of its own. As of this review, taurine has no authorised EU health claim as a standalone nutrient. In the United States, a structure/function statement is allowed with substantiation and the DSHEA disclaimer, and a disease claim is not. A sentence that is acceptable in one market can be a disease claim in the other. A claim is the brand's responsibility and the market's decision; this site makes no claim for the ingredient. ## The document pack - Batch certificate of analysis with the magnesium assay, taurate identity, loss on drying, pH, mesh, density, heavy-metal and microbiological results. - Specification and technical data sheet naming magnesium taurate, CAS 334824-43-0, the magnesium basis and the mesh. - Safety data sheet in the 16-section format. - Annex II citation for the EU, and the retained-list citation for Great Britain. - Contaminant statement against Regulation (EU) 2023/915, or the destination rule where it differs. - Allergen, GMO, origin and residual-solvent statements. - US dietary-ingredient basis statement, with the supporting evidence. - Label artwork and a nutrition worksheet showing the magnesium per portion and the % NRV or % DV. - Third-party certificate, where the buyer's review or the destination requires one. ## Six checks before ordering - Is the exact salt named, magnesium taurate rather than magnesium acetyl taurate, and is it permitted in the destination market? - Do the contaminant results cover the finished-product limit and the daily dose, not only the raw material? - Does the label name the salt and declare magnesium in the required units and percentage? - Is the taurine part of the salt, or is free taurine added? If it is added, is it declared? - Is the US dietary-ingredient basis documented for the exact form? - Is every claim authorised, or is it a compliant structure/function statement with the required disclaimer? The COA page sets out the release parameters; the identity page shows how the salt is proved; the EU, US and UK regulatory notes carry the market detail. The quality page shows how the batch file is put together. ### 06 How we prove a magnesium taurate lot is the taurate URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-taurate/identity/ Reviewed: 2026-11-18 Identity for magnesium taurate is four answers on the same lot: the magnesium assay, the taurate identity, the 1:2 ratio between them, and the absence of a second magnesium source. The magnesium assay alone is the weakest of the four. The anhydrous salt is only 8.9% magnesium, so a blend of magnesium oxide and taurine can be built to the same percentage and pass the assay without containing the salt. In one lineA magnesium assay cannot prove the salt: the taurate, the 1:2 ratio and the absence of a second magnesium source have to agree on the same lot. ## The four layers Layer one is the elemental magnesium, measured by complexometric EDTA titration on the dried basis. It tells you how much magnesium is present and nothing about where it came from. Layer two is the taurate identity: a taurate reaction and an infrared spectrum against a reference. It tells you that taurine is present and, if the comparison is done properly, whether the taurine is bound in the salt. Layer three is the ratio. The anhydrous salt is Mg(taurate)₂, one magnesium per two taurate anions, with a theoretical magnesium content of 8.9% and a taurate content of 91.1%. A calculated Mg : taurate ratio close to 1:2 is consistent with the salt. Layer four is the absence of an undeclared magnesium source: another salt, a carrier, or free taurine added to a magnesium oxide base. Each layer needs its own method, and a certificate with only the magnesium line leaves three of the four questions open. ## The ratio, and what it misses The formula gives the target. C₄H₁₂MgN₂O₆S₂ has a molar mass of about 272.6 g/mol; magnesium is 24.3 g/mol, or 8.9%, and the taurate is the other 91.1%. If a taurine assay is run alongside the magnesium assay, the calculated Mg : taurate ratio should sit close to 1:2. The ratio is calculated, so its uncertainty combines both assays. The specification should give a range, such as 1.95–2.05. The ratio is necessary but not sufficient. A blend of magnesium oxide and taurine can be formulated to the same 1:2 ratio by adding the right amount of taurine. The ratio catches a sloppy blend; it does not catch a deliberate one. That is why the identity evidence has to include the bonding test and the oxide screen, not only the arithmetic. A magnesium result above 9.0% on the dried basis is a signal in itself. The pure salt cannot exceed 8.9%, so a higher figure points to another magnesium source, a different hydrate or complex, or an assay bias. A figure at the top of the range is not a richer lot until the identity lines explain it. ## What each test can and cannot prove Identity tests · what each one establishes for magnesium taurate | Method | What it establishes | What it leaves open | Complexometric EDTA titration | Magnesium content | The identity of the counter-ion | Taurate reaction | Taurine in the sample | Whether it is part of the salt | Infrared spectrum against a reference | The salt's spectrum and bonding | How much of each phase is present | X-ray diffraction | Crystalline magnesium oxide, down to the detection limit | Amorphous or dissolved species | pH of 5% suspension | Consistency with the salt; an alkaline blend signal | Identity by itself | Loss on drying or Karl Fischer | Water content | Which hydrate if the sample is mixed | ICP-MS | The contaminant panel | Identity of the salt For crystalline magnesium oxide, diffraction is the most direct evidence, but the limit of detection is a property of the method and the sample preparation. Report “none detected” only with the limit beside it. The infrared comparison has the same discipline: the sample spectrum should be compared with a magnesium taurate reference, not with taurine alone. The sulfonate and N–H regions are where a physical mixture and a reacted salt can diverge, and a report that does not name the reference cannot be checked. pH is a screen, not proof. The salt's 5% suspension sits at 5.0–7.0; magnesium oxide is alkaline, and a blend that carries oxide usually shifts the suspension upward. A buffered blend can hide the shift, so pH supports the other tests rather than replacing them. ## The blend routes The first route is magnesium oxide plus taurine. Magnesium oxide is about 60% magnesium, so roughly 14% oxide with 86% taurine lands at about 8.5% magnesium. Both the magnesium assay and a taurine assay can pass, and the ratio can be made to look correct. The infrared spectrum and the XRD oxide screen are the discriminators, and the pH usually supports them. The second route is another magnesium salt: magnesium citrate at about 16% magnesium, magnesium sulphate at about 10% as the heptahydrate, or magnesium carbonate at about 29%. A blend can hit 8–9% magnesium with any of them. A citrate reaction, a sulphate test or the pH behaviour will show the difference, and the taurate reaction will be weak or absent. The third route is added taurine. A low-taurate magnesium source is topped up with free taurine so that the total taurine and the ratio look right. A free-taurine fraction that is too high for a salt, or a total taurine figure that does not match the magnesium, is the signal. The fourth route is water or a carrier: the magnesium and the taurate are both diluted, and the loss on drying or the ash tells the story. Each route leaves a different signature, which is why one test is not enough. ## Specification lines that carry identity - Assay: magnesium 8.0–9.0%, dried basis, complexometric EDTA. - Identity: taurate reaction plus an infrared match to the reference salt. - Water and pH: loss on drying ≤10.0%; 5% suspension 5.0–7.0. - Physical: ≥90% through 60 mesh; bulk density 0.50–0.80 g/mL. - Purity statement: no added magnesium oxide, no second magnesium salt, no free taurine. - On request: taurine assay and calculated Mg : taurate ratio; XRD oxide screen with its detection limit. The specification should say “magnesium taurate”, not “magnesium taurate complex” or “magnesium taurine blend”. The name is the first identity test, and a vague name makes the rest of the file vague as well. ## Five questions for a supplier - What is the magnesium method, and is the result on a dried basis? What is the loss on drying for this lot? - What taurate identity test was run, and against which reference? Can you send the infrared spectrum? - Has an XRD oxide screen been run, and what limit of detection does the report state? - Is any magnesium source other than magnesium taurate present, and is any free taurine added? - Does the lot number on the certificate match the drum and the retained sample? Can I see the batch record? The answers should agree. A certificate that reports 8.9% magnesium, a clean taurate reaction and an infrared match is a coherent story; one that reports the magnesium figure and nothing else is a number waiting for a question. The COA page shows where these lines sit on the certificate; the salt comparison explains why the taurate and the glycinate need different evidence; the XRD note and the FTIR note describe the methods. The product page carries the catalog specification. ### 01 What the COA for zinc gluconate actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-gluconate/coa/ Reviewed: 2026-11-18 The certificate for a zinc gluconate lot reports appearance, the salt assay by complexometric EDTA on the anhydrous basis, elemental zinc, the identification tests, pH of the 10% solution, loss on drying, particle size, heavy metals and microbiology. Each line should carry the method, the release limit and the lot result. The ranges below are the catalog specification; the batch COA confirms a particular drum. In one lineThe certificate has to show three things at once: the assay on the anhydrous basis, the elemental zinc the label will use, and the gluconate tests that separate this salt from an oxide or a citrate. ## The certificate as a test report A certificate earns its place when a stranger can audit it: parameter, method, release limit and result on every line. A sheet with a method column and no result column is a specification with a letterhead. Identity, assay and condition · zinc gluconate | Parameter | Method | Release limit | Appearance | Visual | White to off-white crystalline powder | Assay (anhydrous basis) | Complexometric EDTA titration | 97.0–102.0% | Zinc (Zn) | Complexometric EDTA titration | 12.5–14.0% | Identification | Zinc reaction, gluconate reaction and infrared spectrum | Conforms | pH (10% solution) | Potentiometry | 6.0–7.5 | Loss on drying | Gravimetric | ≤1.0% | Particle size | Sieve analysis | ≥95% through 80 mesh Contaminant and microbiological limits | Parameter | Method | Release limit | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent The first table covers the molecule and its condition; the second covers the contaminants a buyer must check against a finished-product limit. ## Assay and zinc are two views of one titration The assay is the mass of zinc gluconate, expressed against the anhydrous molecule; zinc is the element inside it. Both come from one complexometric titration: disodium edetate binds zinc one to one, and the laboratory converts the zinc result into salt with a factor. The factor comes from the formula. Anhydrous zinc gluconate, C12H22O14Zn, has a molar mass of about 455.7 g/mol, and zinc accounts for 65.38 of that. The theoretical zinc content is therefore 65.38 ÷ 455.7 = 14.35%, and the reciprocal, 6.97, converts zinc back into salt. A lot reporting 14.1% zinc is reporting an assay of about 98.3%. That arithmetic is the first audit check. If a certificate shows an assay of 101.0% and a zinc result of 13.0%, the pair cannot both be right, because 13.0% zinc converts to about 90.6% salt. One figure has been calculated on another basis, or copied from another line. Ask which figure the laboratory measured and which it calculated. The anhydrous basis is the second check. The result is corrected for the water measured by loss on drying, and the correction is small because the ceiling is ≤1.0%. Small is not zero: a certificate that reports the assay “as is”, or corrects one figure and not the other, will not reconcile with the zinc line. The basis belongs in the column heading. Neither figure identifies the anion. EDTA sees zinc, and zinc is present in the oxide, the citrate, the sulfate and the gluconate. The zinc reaction proves the element; the gluconate reaction and the infrared spectrum prove the ligand. ## Release limit, batch result and the word “conforms” The release limit is the gate; the batch result is what the laboratory measured. They belong in separate columns with the method beside them. A result column repeating the range is a copy of the gate, not evidence that it was passed. Three lines deserve a result rather than a tick. Loss on drying has a ceiling of 1.0%, the whole allowance for surface water on a freely soluble powder; 0.9% is inside the gate but close to it, and a humid room will move it. pH of the 10% solution sits at 6.0–7.5; a low reading can point to residual gluconic acid, a high one to unreactioned zinc oxide. Neither proves a defect, but each is a question for the batch record. The heavy-metal panel should report each element against its own limit with the laboratory's quantification limit. “Heavy metals: passed” is a conclusion without a number. The same applies to microbiology: the absence tests should name the organism and the sample size, and the APC and yeast-and-mould results should be figures. “Conforms” is acceptable for the identification tests, and only when the certificate names the reference. An infrared comparison with an unnamed spectrum is a comparison with something. ## What moves between lots Zinc moves with the reaction and crystallisation, and the assay follows because both come from one titration. Loss on drying moves with the drying step and the pack: a drum closed late reads higher than one sealed at the line. pH moves with the neutralisation endpoint, and particle size moves with the mill and sieve — the parameter that most often changes when a supplier switches site. Colour and flow are the qualitative signals. A grey or yellow cast can follow a hot drying step, a trace of iron or a wet mill while the assay stays inside its window. Read it with the batch record; a trend across three lots says more than one result at an edge. The lot code belongs on the certificate, the drum label and the retained sample, together with the site and the form the lot was released against. ## When an outside test is worth ordering Four situations justify it: a new source, a first shipment into a regulated market, an identity claim the supplier's own certificate does not prove, and a disputed result. The useful panel is targeted rather than a full repeat: a second EDTA titration, ICP-MS for the four contaminant elements, X-ray diffraction for crystalline zinc oxide and FTIR against a gluconate reference. If a diluent is suspected, add a glucose test and a loss-on-drying repeat. Ask for the detection limit on the diffraction screen: a “not detected” line without a limit describes the method, not the sample. Chain of custody matters as much as the method. The sample tested should be the sample retained, and the report should name the lot, the sample weight and the basis. The XRD note and the ICP-MS note set out what each technique can establish. ## Six lines to put side by side When two quotations arrive, compare the hydrate state, the assay with its basis, the zinc result, the identification tests with the reference named, loss on drying, and the mesh. Two certificates that agree on zinc and disagree on the other five are not describing the same powder. The second layer is traceability: who made the lot, which zinc source and drying step were used, and whether the certificate matches the drum. A correct certificate can still belong to a different lot. The catalog specification sits on the zinc gluconate product page. The salt comparison is on the grade page, the identity tests are on the identity page, and the release workflow is on the quality page. The titration itself is described in the complexometric method note. ### 02 Zinc gluconate or citrate: choosing a zinc salt URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-gluconate/grades/ Reviewed: 2026-11-18 Zinc gluconate and zinc citrate are two anions with one element in common, not two purities of the same powder. Four numbers settle most of the choice: the zinc each gram carries, the water the crystal holds, the solubility in the matrix, and the mass the dosage form can accept. The gluconate carries about 14% zinc and dissolves freely; the citrate dihydrate carries about 32% and only partly dissolves. In one lineZinc gluconate buys a clear solution and a mild taste at roughly twice the powder mass; zinc citrate buys mass efficiency at the cost of a dispersion, so the dosage form decides first. ## Two salts, two sets of numbers A zinc label declares the element, but the drum contains a salt. The anion is most of the mass and all of the difference. Zinc gluconate is a 1:1 salt: one zinc atom for one gluconate ion, formula C12H22O14Zn, molar mass about 455.7 g/mol, and 14.35% zinc in the anhydrous form. Zinc citrate dihydrate is a 3:1 salt: three zinc atoms for two citrate ions, about 610.4 g/mol, and 32.1% zinc once the two water molecules are counted. This catalogue line is the anhydrous gluconate, released at loss on drying ≤1.0%. That matters when quotations are compared: a monohydrate carries about 3.8% water, so 14.0% zinc as-is with 4% water is not the same material as 14.0% as-is with 0.4%. The zinc windows are also different shapes: the gluconate is specified at 12.5–14.0% zinc with a 97.0–102.0% assay on the anhydrous basis, the citrate on a dried basis at 31.0–32.5%. Comparing the two percentages compares the element, the easiest figure to convert and the least able to describe the powder. ## The options side by side Zinc salts and process variants · what changes in the drum | Salt and form | Zinc | In water | Fits | Watch | Zinc gluconate, anhydrous, 80 mesh | 12.5–14.0%; about 14.35% theoretical | Freely soluble; 10% solution | Capsules, tablets, sticks, syrups, clear drinks | Roughly twice the mass per milligram of zinc | Zinc gluconate, milled to 100 mesh | Same specification | Same as the 80 mesh line | Dry blends, suspensions | Dust, flow and blend segregation | Zinc citrate dihydrate, 40 mesh | 31.0–32.5% on the dried basis | Slightly soluble; 5% suspension | Capsules, tablets, opaque sticks | The dispersion settles on standing | Zinc citrate, granulated | Same specification | Same as the 40 mesh line | Tablets, sachets | Granulation aids must be declared The two gluconate rows are process variants of one salt, and the citrate rows likewise. Milling changes the particle-size distribution and the dust level, not the zinc figure. Moving between the gluconate block and the citrate block is a different anion and a different specification. ## Solubility, taste and the powder in the room Solubility separates the two more sharply than the zinc figure. Zinc gluconate is freely soluble, and its 10% solution is close to neutral at pH 6.0–7.5, which is why it appears in syrups, clear drinks and stick packs where the salt has to disappear. Zinc citrate at 5% is a suspension, not a solution, at pH 5.0–7.0; it can be stirred into an opaque drink but settles, and a clear beverage at a meaningful zinc dose is not its natural format. Taste follows the free zinc as much as the anion. Both salts are mild next to zinc sulfate, and both turn metallic as the zinc concentration rises. Supplier panels describe the gluconate as mild with a faint mineral note; the citrate can read faintly tart because of the acid anion. Those descriptions are starting points. The sugar system, the acid, the flavour and the serving temperature decide what the consumer tastes, and a trial at the real zinc concentration is the only useful test. Powder handling is the third difference. An 80 mesh crystalline gluconate flows and dissolves quickly, but it picks up surface moisture in an open liner, which shows as caking and a loss on drying above 1.0%. A 40 mesh citrate wets out more slowly, disperses rather than dissolves and can settle. Match the mesh to the line. ## What the dosage form can carry The arithmetic is division, and it decides most capsule projects. At 13.9% zinc, a 10 mg claim needs about 72 mg of gluconate; at 32.1%, the citrate needs about 31 mg. At 50 mg the gap is about 360 mg against about 156 mg, and that is where a fixed capsule size starts to matter. A tablet has the same arithmetic in a different shape: the gluconate needs more compression mass, and the extra mass can help or hurt a direct-compression blend. In a stick pack or a drink, the gluconate's solubility is worth the mass. It dissolves to a clear solution and leaves no dispersion to shake. The price is roughly twice the powder per milligram of zinc, which matters when the stick is already full of other ingredients. A gummy or a chew is governed more by water activity and pH than by the salt; both anions can work, but the gluconate adds more water-binding solute per milligram of zinc. In a powder blend, particle size and flow decide segregation. An 80 mesh gluconate and a 40 mesh citrate behave differently in the same blender, so the blend study should use the shipping grade. ## How to write the specification - “Zinc gluconate, C12H22O14Zn, CAS 4468-02-4; anhydrous form declared.” - “Assay 97.0–102.0% on the anhydrous basis by complexometric EDTA; zinc 12.5–14.0%.” - “Identification: zinc reaction, gluconate reaction and infrared spectrum against a named reference.” - “Loss on drying ≤1.0%; pH of the 10% solution 6.0–7.5; ≥95% through 80 mesh.” - “No added zinc oxide, zinc citrate or glucose; heavy metals and microbiology as the catalog.” For the citrate, change the name, the CAS number, the zinc range and the drying basis, and keep the identity, moisture, pH and mesh lines that fit the dosage form. A specification that says only “zinc” has described neither salt. The elemental-assay entry explains why the element and the salt are separate declarations. ## What changes when you switch, and when not to A salt switch is a change control, not a substitution. It moves the fill weight, the taste, the dispersion behaviour, the stability file and the label, so it needs a new specification, a matrix trial at the real pH and process temperature, and a new artwork proof. A capsule qualified on the citrate cannot be filled with gluconate at the same weight. The switch is justified when the current salt is the constraint: a clear drink that will not tolerate a dispersion, a capsule that cannot hold the gluconate mass, or a taste trial that favours one anion. It is not justified by one quotation or a higher zinc figure. If the current salt works and the file is complete, the burden sits on the change. The gluconate versus citrate page works through the fill arithmetic and the label; the COA page shows how the gluconate figures are reported; the zinc citrate grade page presents the other salt from its own side; the catalogue line is on the zinc gluconate product page. ### 03 Zinc gluconate is stable dry; moisture and the matrix decide the rest URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-gluconate/stability/ Reviewed: 2026-11-18 Zinc gluconate has no hydrolysable group and no redox-active centre, so the dry salt does not degrade on storage; what changes is its physical state. The powder is freely soluble and takes up surface moisture, which lifts loss on drying above the 1.0% limit and cakes the crystals, while a solution follows the pH, the preservative system and the other minerals in the matrix. The pack and the formula decide the shelf life. In one lineThe dry salt does not degrade; it takes up water, cakes, and in solution follows the pH and the microbial load of the matrix. ## The powder after the liner is opened In a sealed 25 kg fiber drum with the food-grade liner intact, the salt can be held at ambient temperature in a dry room. The risk starts at the first draw. An open liner lets the powder take up surface moisture, and because the salt is freely soluble, that moisture dissolves a little of the surface and re-deposits it as bridges between particles. The visible result is caking, slower flow and fines that no longer match the line; the zinc assay can stay inside its window throughout. Loss on drying catches this early. The release limit is ≤1.0%, which leaves little room for water picked up in handling; a lot released at 0.4% and stored in a humid room will move long before the assay does. The data sheet should state the storage condition, and the packing specification should say whether a desiccant is included. Close the liner after every draw, keep the drum off the floor and out of sunlight, and do not store it next to a wet process. A tan or grey cast is a prompt to check the metal panel and drying record, not a reason to reject on appearance. ## In solution the matrix takes over A 10% solution is clear and sits at pH 6.0–7.5, close to neutral. That is the format the salt suits, and it is where the rest of the formula matters most. Acid moves the equilibrium: at pH 4 or below the gluconate is protonated, more zinc is free in solution, and the taste sharpens toward metallic. Alkaline conditions push the other way, and zinc hydroxide can cloud a clear drink above the pH range the salt itself holds. Zinc also competes for ligands. Phosphate, phytate and carbonate can take zinc out of solution as sparingly soluble salts, and a fortified drink buffered with phosphate may lose clarity or deliver less zinc than the label implies. Citrate holds zinc more tightly than gluconate and can keep it in solution, which is one reason a mixed mineral system behaves differently from a single-salt trial. Water is also a microbial habitat. Gluconate is a carbon source, and a syrup or a ready-to-drink format needs a preservative system, a controlled water activity or a thermal process, backed by a preservative challenge test. The salt does not introduce the organisms, but it does not inhibit them either. Heat threatens the matrix more than the molecule. The salt has no hydrolysis route and no oxidation step to run, but a hot hold drives moisture migration, sugar browning in a syrup and flavour loss. Light does not degrade the salt; colour drift in a clear drink usually comes from another ingredient or trace metals. ## What moves the result Stability factors · zinc gluconate in storage and in formula | Factor | What changes | What to do | Water pickup | Loss on drying climbs, powder cakes, flow falls | Keep the liner closed; dry room; desiccant if needed | Acidic matrix | More free zinc, sharper taste | Set the pH; trial the taste at the real acid level | Alkaline matrix | Zinc hydroxide haze or sediment | Keep the pH inside the solution range | Phosphate or phytate | Zinc binding, sediment, lower soluble zinc | Trial the full mineral load, not the salt alone | Heat | Moisture migration, browning in a sugar matrix | Lower the hold temperature and time | Pack | Moisture-vapour transfer, odour pickup | Foil laminate for sticks; sealed liner for drums | Microbial load | Growth in an aqueous matrix | Preservative system, water activity, challenge test | Mesh | Fines, dust and caking behaviour | Match the mesh to the line ## The stability protocol A bulk study fills the commercial pack and holds it at 25 °C and 60% relative humidity, and at 40 °C and 75% relative humidity. Samples are pulled at 0, 3, 6, 12 and 24 months and tested for zinc by EDTA, loss on drying, pH, appearance, particle size and microbiology. The 40 °C chamber is a tool for ranking formulations and packs, not a storage instruction. The finished dosage form needs its own study. Capsules, tablets, sticks and gummies go into 30 °C and 65% relative humidity, and into 40 °C and 75% relative humidity, and are tested for zinc, moisture, colour, taste and, where relevant, dissolution or disintegration. A drink adds pH, preservative efficacy and clarity. The bulk powder can pass while the pack fails, so the brand needs the dosage-form result. ## Formulation and packaging A capsule or tablet shields the powder; moisture and the excipient list are the remaining risks. A direct-compression blend needs a lubricant that brings no water, and a hygroscopic excipient can pull moisture toward the salt. A sealed blister or a high-density polyethylene pack with a desiccant is a sensible default; a granulated grade may flow better but can carry a declarable binder. For a stick pack, the laminate is part of the formulation. Begin with a heat-sealed foil structure that has a low moisture-vapour transmission rate, and regard a clear or paper construction as a retail choice that needs data behind it. A gummy or a chew is governed by its sugar system, water activity and pH, and the gluconate adds solute that binds water. In a drink the pH and the preservative system outrank the grade, and a clear format is the natural fit for a freely soluble salt; the grade page compares the options. Pack the powder in the 1 kg foil pouch or the 25 kg fiber drum described on the ordering page, and close the liner after every draw. A pack left open between shifts is not the pack that was studied. ## Where the shelf life comes from The shelf life belongs to the pack and the matrix, not to the molecule. A technical data sheet should state the storage condition and whether the date is a retest period for bulk material or an expiry date for a consumer pack. If the study does not cover the pack, the matrix or the climate, the honest answer is a shorter date or a new study; one retest of an old lot is not an extension. Trend the data rather than reading one point: a loss on drying that climbs across three pulls, a drifting pH or a darkening colour is a direction to build the date on. The COA page lists the parameters tracked over time, the loss-on-drying entry explains how the moisture figure is obtained, and the quality page describes the record keeping. The catalogue specification is on the zinc gluconate product page. ### 04 Zinc gluconate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-gluconate/moq/ Reviewed: 2026-11-18 Zinc gluconate can be ordered from one kilogram: a foil pouch filled from a released lot, with that lot's certificate and a retained sample behind it. Production moves to the 25 kg fiber drum, and dispatch is confirmed at one to seven days once the grade, pack, quantity and destination documents are agreed. The minimum is a qualification quantity, not a retail pack. In one lineOne kilogram is a lot-linked trial pack, the 25 kg drum is the production unit, and the quotation follows the grade, the quantity and the destination. ## Why the minimum is one kilogram One kilogram lets a formulator work with the production material without committing to a drum. At 13.5% zinc it carries about 135 g of elemental zinc, which is roughly 13,000 capsules at a 10 mg claim before process loss, or about 2,700 at a 50 mg claim. That is enough for bench work, a short stability pilot and a small batch, and it is drawn from a lot that has already been released rather than from a sample bench. The pack is the smallest unit that can be labelled and documented as a lot in its own right. If an order exceeds one kilogram, the packer keeps the same lot where the lot size allows; if it does not, a new lot is made and a new certificate is issued. The lot code on the pouch is the thread that connects the material to its certificate, retained sample and stability file. Name the salt and the form in the first message. This catalogue line is the anhydrous gluconate, C12H22O14Zn, CAS 4468-02-4, at 97.0–102.0% assay on the anhydrous basis and 12.5–14.0% zinc, with loss on drying ≤1.0%. A hydrate or a different mesh is a different trial, and a sample of the wrong one will not qualify the label. ## Packaging Standard packs · zinc gluconate | Pack | Use | Notes | 1 kg foil pouch | Bench trials, stability pilots, small batches | Food-grade liner, heat-sealed; lot label on the pouch | 25 kg fiber drum | Routine production | Food-grade liner, sealed; tamper-evident closure | Pallet | Palletised dispatch | Stretch-wrapped; lot labels visible on every drum The liner belongs to the pack specification. A drum with an unsealed liner has been stored differently from the one that was studied, and the certificate does not record the difference. For a humid destination, ask for a desiccant and have the packing specification name it. Every pouch and drum should show the product and form, the lot, the certificate reference, the net weight and the storage condition. Without a lot number the pack cannot be linked to a certificate, a retained sample or a stability file, and the material becomes unclaimable. ## Lead time Indicative dispatch is one to seven days after the specification and the order are confirmed. The clock starts when the grade, quantity, pack and documents are agreed; an enquiry against an open specification is not an order. Four requests add time: a mill below the catalogue 80 mesh, a granulated grade, an outside test, and destination documents such as a certificate of origin or a translated label. Put any of them in the first message and the quotation can show the added days rather than discovering them at dispatch. ## What the quotation needs - The salt and form to be matched, or the specification you want to write. - A first quantity and an annual estimate. - The dosage form: capsule, tablet, stick, gummy or drink. - The destination country and the documents it requires. - The mesh and flow the line can run. - The date the material has to be in production. A competitor's certificate can start the conversation faster than a written specification, because it shows the methods and limits your quality team already uses. The reply can then be a counter-specification that states what can be matched and what cannot. Packing, freight and documents follow the destination, so commercial terms are set against the confirmed order rather than published as a list. ## Samples A sample comes from a released lot and travels with that lot's certificate; the quantity is agreed at enquiry. Without the certificate the trial cannot be linked to a lot record or repeated. Ask for the grade that will ship: an 80 mesh anhydrous powder does not represent a 100 mesh milled grade or a granulated one, and a taste trial on the wrong mesh is still a taste trial on the wrong powder. If the sample is meant to qualify a process variant, request that variant. If it is meant to qualify a supplier, ask for the certificate and the retained-sample reference at the same time. Sample freight and documents are confirmed with the request, and a sample without its paperwork is a free powder rather than a qualification lot. ## Payment and terms Payment terms, Incoterm and the document list are set in the order confirmation. They depend on the destination, the order size and whether the account is new, so they belong in the quotation rather than in a published rule. Any claim is assessed against the retained sample and the lot certificate. Report a damaged pack or a mismatch as soon as it arrives, with photographs of the carton and the lot label, before the material is used. Once the liner has been opened and the powder has been through a process, the retained sample is the only reference that still speaks for the lot. The COA page lists the certificate fields, the stability page covers storage and the pack, and the retained-sample entry explains why the reference matters. Dispatch and documentation are described on the logistics page, and the product line is on the zinc gluconate hub. ### 05 Where zinc gluconate is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-gluconate/compliance/ Reviewed: 2026-11-18 Zinc gluconate is a permitted zinc form for food supplements in the EU and the UK, and a dietary ingredient in the US. Permission is the entry ticket: the finished product still has to meet contaminant limits, carry the particulars and use permitted wording. The raw-material file has to show the form, the assay basis, the contaminants and the label arithmetic. In one lineThe form is permitted in all three markets; the file still has to prove the form, the contaminants at the finished dose, the label arithmetic and the claim wording. ## Four checks, not one Compliance separates into four questions that are often answered as one. Is the form permitted? Is the contaminant load acceptable at the real dose? Does the label carry the required particulars? Is every claim authorised? A permitted form answers only the first, and a certificate that passes the catalog answers none of them. This page covers the raw material; the finished product, its dose and label copy belong to the brand. The UK kept a parallel list: the permitted forms sit in the retained Annex II, and the Food Supplements (England) Regulations 2003 provide the domestic instrument. GB contaminant limits are retained; Northern Ireland follows the EU list. ## European Union Directive 2002/46/EC lists the vitamin and mineral forms that food supplements may use, and zinc gluconate appears in Part B of Annex II among the permitted zinc forms, as amended. The entry is permission, not a purity standard; it sets no dose and does not touch the contaminant, labelling or claim rules. Contaminants fall under Regulation (EU) 2023/915, which replaced Regulation (EC) No 1881/2006. For food supplements it sets lead at 3.0 mg/kg, cadmium at 1.0 mg/kg and mercury at 0.10 mg/kg on the product as sold. There is no harmonised EU maximum for arsenic in supplements, so the ≤2 mg/kg figure in this catalog is a buyer limit. Labelling follows Regulation (EU) No 1169/2011 and the supplement particulars in Directive 2002/46/EC: the words “food supplement”, the nutrient name and amount per portion, the percentage of the reference value, the daily-dose warning, the keep-out-of-reach warning and the varied-diet statement. Zinc's reference value is 10 mg. Claims are authorised under Regulation (EC) No 1924/2006 and the Union Register; a “source of zinc” claim needs 15% of that value, or 1.5 mg, in the daily portion. National maximum levels and notification rules differ, so check the current text. ## United States Zinc gluconate is marketed in the United States as a dietary ingredient under DSHEA. There is no pre-market approval, but the seller has to show the basis: pre-15 October 1994 marketing, a GRAS conclusion, or a new dietary ingredient notification. The file should name the basis and hold the evidence. The Supplement Facts panel is set by 21 CFR 101.36: elemental zinc per serving and the percentage of the Daily Value, 11 mg for adults and children four years and older. The ingredient list names the salt, so “zinc gluconate” and “zinc citrate” are not interchangeable even at the same zinc figure. A structure/function statement must be truthful, substantiated and clear, with the DSHEA disclaimer required by 21 CFR 101.93, and the marketer must notify the FDA within 30 days of first marketing it. A disease-related claim is not permitted. The cGMPs in 21 CFR 111 require identity testing of the incoming ingredient. There is no federal maximum for lead, arsenic, cadmium or mercury in supplements. California's Proposition 65 sets a 0.5 µg/day maximum allowable dose level for lead and a 15 µg/day no-significant-risk level; state rules, customer specifications and USP <2232> fill the gap. ## The contaminant table Contaminant ceilings for supplements · EU, US, UK and this catalog at this review | Element | EU | US | UK | Catalog | Lead | 3.0 mg/kg in the supplement as sold | No federal supplement limit; state rules apply | 3.0 mg/kg retained limit | ≤3 mg/kg | Cadmium | 1.0 mg/kg | No federal supplement limit | 1.0 mg/kg retained limit | ≤1 mg/kg | Mercury | 0.10 mg/kg | No federal supplement limit | 0.10 mg/kg retained limit | ≤0.1 mg/kg | Arsenic | No harmonised EU limit | No federal supplement limit | No harmonised GB limit | ≤2 mg/kg The catalog limits for lead, cadmium and mercury are the EU finished-product ceilings, which leaves no headroom. The ceiling applies to the product as sold, so a supplement built mostly from this powder has nowhere to put a second contributor; a multi-mineral formula needs a tighter limit. The finished dose changes the arithmetic. A 50 mg zinc claim needs about 360 mg of gluconate at 13.9% zinc, so a raw material at the 3 mg/kg lead ceiling delivers about 1.1 µg per serving if the salt is the only source — above California's 0.5 µg/day maximum allowable dose level. A high-dose product needs a tighter limit. At 10 mg zinc the powder mass is about 72 mg, and the same 3 mg/kg delivers about 0.22 µg. Microbiology is a buyer requirement in all three markets; the catalog applies APC ≤1,000 cfu/g, yeast and mould ≤100 cfu/g, and absence of E. coli and Salmonella. ## The claims boundary The EU and GB registers carry authorised zinc claims, which attach to the nutrient in the finished product, in the authorised wording and conditions. They do not attach to the raw material. In the US a structure/function statement belongs to the brand, with the DSHEA disclaimer. No market allows a disease-related claim. This page does not reproduce claim wording, and nothing here is a health claim for zinc gluconate. A formulation statement such as “zinc gluconate is used in capsules” describes the material; the brand that prints a claim owns the wording. ## The document pack Documents that travel with a zinc gluconate lot | Document | What it must show | Scope | Certificate of analysis | Lot, tests, methods, limits, results and basis | Every lot | Specification | Identity, assay basis, physical and contaminant limits | Per product | Technical data sheet | Form, typical values, solubility, packing and storage | Per product | Safety data sheet | Hazard, handling and transport information | Per product | Allergen and GMO statements | Declarable allergens and GM status | Per product | Manufacturing flow and origin | Site, route and country of origin | Per supplier | Certification | Quality or food-safety certificate, if held | Per site A certificate alone is not a file: the specification is what it is written against, and the statements are what the customer will ask for. ## Before the first order - Form and CAS number named on the certificate and the label, with the anhydrous state declared. - Assay on the anhydrous basis, with the EDTA method and the loss-on-drying result beside it. - Zinc range stated, and the label arithmetic checked against the salt figure. - Contaminants and microbiology compared with the destination's limits at the real finished dose. - Label particulars complete: nutrient per portion, reference percentage and warnings. - Claims limited to authorised wording; no disease claim anywhere in the file. - Documents complete for the lot; retained sample under the same lot code. The COA page shows where each figure sits, the identity page covers the tests behind the form, and the market summaries are in the EU, US and UK notes. The quality page describes the release file, and the catalogue line is on the zinc gluconate product page. ### 06 How we prove a zinc gluconate lot is the gluconate URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-gluconate/identity/ Reviewed: 2026-11-18 A zinc gluconate lot is proved on four levels: the molecule named on the paper, the zinc ion by reaction, the gluconate ligand by chromatography and infrared spectrum, and the assay on the anhydrous basis with the condition tests around it. The EDTA titration proves quantity; the ligand tests prove which salt the zinc is in. A certificate that reports only zinc has proved neither the anion nor the form. In one lineZinc proves the element, the gluconate reaction and infrared spectrum prove the ligand, and the anhydrous assay proves how much salt is there. ## Four layers, four different failures What each identity layer establishes for zinc gluconate | Layer | Evidence | What it establishes | What it cannot | Paper | Name, formula, CAS 4468-02-4, anhydrous state, site | The file describes the right molecule | Nothing about the powder in the drum | Element | Compendial zinc identification tests | Zinc is present | Which zinc salt it is | Ligand | Gluconate reaction, TLC against a gluconate reference, infrared spectrum | The gluconate ion is present | How much salt is there | Quantity and condition | EDTA assay on the anhydrous basis, loss on drying, pH, mesh, metals, micro | The lot meets the specification | That the ligand is gluconate Each layer catches a different failure: a wrong name or missing hydrate on the paper, a non-zinc powder at the element, a different salt at the ligand, a weak or diluted lot at the assay. A certificate with a tick in all four columns is auditable; one with a zinc figure alone is a single number doing four jobs. The zinc tests give the characteristic white hydroxide precipitate, soluble in excess alkali, and a white ferrocyanide precipitate. Neither is specific to gluconate, which is why the ligand sits beside it. ## One zinc per gluconate, and what that fixes There is no ligand ratio to calculate here, as there would be for a chelate. Zinc gluconate is a 1:1 salt: one zinc ion for one gluconate ion. The anhydrous molecule weighs about 455.7 g/mol and zinc accounts for 65.38, so the theoretical zinc content is 14.35% and the reciprocal, 6.97, converts a zinc result into salt. That fixed ratio is an identity tool, because it sets a ceiling: zinc above 14.35% cannot come from zinc gluconate alone. Take a hypothetical certificate with 13.9% zinc as-is and 0.5% loss on drying. The anhydrous zinc is 13.9 ÷ 0.995 = 13.97%, and the assay is 13.97 × 6.97 = 97.4%. That is the arithmetic the certificate should reproduce. If the same sheet reported 14.0% zinc and an assay of 102%, the pair could not both be right: 102% requires 14.6% zinc, and 14.0% caps the assay at 97.6%. One figure was calculated on another basis or copied from a different line. The anhydrous basis makes the pair comparable. With loss on drying ≤1.0% the correction is small but not optional: an as-is assay and an anhydrous assay differ by the water figure, and a certificate that does not say which it used cannot be reconciled with the zinc line. A hydrate would move the whole calculation. ## What infrared and diffraction add The infrared spectrum is a fingerprint of the gluconate ligand. Carboxylate absorption sits near 1600 and 1400 cm⁻¹, the broad hydroxyl band near 3400 cm⁻¹, and the spectrum is compared with a reference of the same form rather than interpreted band by band. In the USP identification the ligand is also compared by thin-layer chromatography against a potassium gluconate reference, which is a sharper test than a colour reaction: it separates gluconate from other sugar acids and from glucose. IR answers “is this the gluconate salt?” It does not answer “how much?” and it is not a purity assay. X-ray diffraction reads the crystal lattice. It distinguishes crystalline zinc oxide and zinc citrate from zinc gluconate, and it can separate an anhydrous pattern from a hydrate if a reference pattern is available. It will not see an amorphous diluent, and it will not quantify a phase below its detection limit. Ask the laboratory for the reference pattern and the limit. A “conforms” with no reference named is a comparison with something unnamed. The FTIR note and the XRD note explain what each technique can establish. ## The routes that move one number at a time Adulteration routes for zinc gluconate and the tests that show them | Route | What moves | Test that shows it | Zinc oxide (about 80% zinc) | Zinc and the calculated assay rise sharply | XRD; assay zinc above the 14.35% ceiling | Zinc citrate (about 32% zinc) | Zinc rises, the anion changes | Infrared, citrate reaction, XRD | Glucose, dextrose or maltodextrin | Zinc and assay fall, loss on drying may rise | Assay, infrared, glucose by HPLC | Zinc sulfate (about 23% zinc as heptahydrate) | Zinc rises, taste sharpens, sulfate appears | Sulfate test, infrared | Water | As-is zinc falls, anhydrous zinc holds | Loss on drying beside the assay The routes share a signature: one number moves while another stays, so read the figures in pairs. A zinc result near the 14.35% ceiling with a low loss on drying points to added zinc oxide or citrate; a low zinc with a high loss on drying points to water or a diluent; a reconciling zinc figure with a mismatched infrared spectrum points to the wrong ligand. A declared blend is not adulteration. If the powder contains zinc gluconate and another zinc source, the label has to name both and the certificate has to report the contribution. The defect is the undeclared blend, not the blend itself. ## How to write the identity specification - “Zinc gluconate, C12H22O14Zn, CAS 4468-02-4; anhydrous form declared.” - “Identification: compendial zinc tests; gluconate by TLC against a gluconate reference and by infrared spectrum against a named reference.” - “Assay 97.0–102.0% on the anhydrous basis by complexometric EDTA; zinc 12.5–14.0%.” - “Loss on drying ≤1.0%; pH of the 10% solution 6.0–7.5; ≥95% through 80 mesh.” - “No added zinc oxide, zinc citrate, zinc sulfate or glucose; heavy metals and microbiology as the catalog.” A specification written this way tells the laboratory what to measure and the supplier what will be rejected. “Assay 13%” does none of that: it does not say whether the figure is zinc or salt, as-is or anhydrous, or which ligand the zinc is bound to. ## Five questions for the supplier - Which zinc figure is reported, and is the assay calculated on the anhydrous basis? - Do the zinc and assay results reconcile through the 6.97 factor, and what is the loss on drying behind the correction? - How is the gluconate identified — TLC, infrared, or both — and against which reference? - Is the form anhydrous, and does the certificate name the hydrate state and the CAS number? - Who manufactured the lot, and can the batch record and retained sample be tied to the lot code? Five answers amount to an identity file; a single zinc percentage does not. The COA page shows where each figure sits on the certificate, the grade page places the salt among its alternatives, and the quality page describes the lot record. The catalogue line is on the zinc gluconate product page. ### 02.1 Zinc gluconate vs citrate: zinc content, taste and the label URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-gluconate/grades/gluconate-vs-citrate/ Reviewed: 2026-11-18 Zinc gluconate and zinc citrate deliver the same element from different molecules, so the comparison begins with mass. The gluconate is a 1:1 salt of about 455.7 g/mol and 14.35% zinc in the anhydrous form; the citrate dihydrate is a 3:1 salt of about 610.4 g/mol and 32.1% zinc. A 15 mg zinc claim therefore needs about 108 mg of gluconate or about 47 mg of citrate, and the rest of the decision follows from that gap. In one lineThe gluconate asks for roughly twice the powder and gives back a clear solution; the citrate asks for half the mass and gives back a dispersion. ## One element, two molecules Zinc gluconate is C12H22O14Zn, CAS 4468-02-4, pairing one zinc ion with one gluconate ion. The anion is the oxidised form of glucose, a straight-chain sugar acid with a carboxylate at one end, and the salt is freely soluble. The anhydrous molecule weighs about 455.7 g/mol. Zinc citrate dihydrate is Zn3(C6H5O7)2·2H2O, CAS 5990-32-9: three zinc ions, two citrate ions and two water molecules. Citrate is a tri-carboxylic acid anion, and the salt is only slightly soluble. The dihydrate weighs about 610.4 g/mol, of which 36.0 is water. The two are separate permitted forms and separate label ingredients, not interchangeable words in an ingredient list even when the zinc per serving is identical. The name has to match the salt in the drum, and a switch is a new ingredient declaration. ## The zinc-to-powder arithmetic Divide the claimed elemental zinc by the zinc fraction of the salt. The table uses 13.9% for the gluconate, near the top of the 12.5–14.0% window, and 32.1% for the citrate dihydrate. A real lot moves with its assay, and the certificate is the figure for a fill weight. Powder mass for a zinc claim · planning arithmetic | Elemental zinc | Zinc gluconate at 13.9% | Zinc citrate dihydrate at 32.1% | Mass ratio | 5 mg | about 36 mg | about 16 mg | about 2.3 times | 10 mg | about 72 mg | about 31 mg | about 2.3 times | 15 mg | about 108 mg | about 47 mg | about 2.3 times | 25 mg | about 180 mg | about 78 mg | about 2.3 times | 50 mg | about 360 mg | about 156 mg | about 2.3 times The moisture correction is the other half of the calculation. The gluconate is released at loss on drying ≤1.0%, so the as-is mass is at most about 1% above the anhydrous figure. The citrate carries 5.9% crystal water, and its 31.0–32.5% zinc is reported on the dried basis, so the as-is mass needs the drying result applied before the fill weight is fixed. Both corrections are small beside the 130% difference between the salts; the point is not to spend the review on the smaller of the two variables. ## Taste follows the free zinc What the tongue detects is zinc in solution, not zinc in the drum. The anion decides how much of the dose is free at the point of tasting: citrate binds zinc more tightly and keeps part of the salt undissolved, while the freely soluble gluconate puts the full dose into solution. Acid shifts the balance, because a lower pH protonates the anion and releases more free zinc; that is why a sour drink can taste more metallic than a neutral one at the same label claim. Supplier panels describe zinc gluconate as mild with a faint mineral note, and zinc citrate as neutral or faintly tart because of the acid anion. Those notes are useful as a starting point and unreliable as a specification. Sweetener, acid, flavour, temperature and the zinc concentration at the serving size all move the result, and the gluconate's larger powder mass means more of the salt is present in the mouth for the same number of milligrams of zinc. A bench trial should use the real matrix at the real zinc concentration, with both salts and a blind code. Two cups of water are not a taste study, and a supplier's description is not a result. ## What each salt fits In a capsule or tablet, the citrate's zinc per gram is the advantage. A 25 mg claim needs about 180 mg of gluconate or about 78 mg of citrate, and at 50 mg the gluconate approaches the practical fill of a size 0 capsule while the citrate still leaves room for excipients. Tablets face the same arithmetic with more freedom, but a larger tablet is still a consumer decision. In a stick pack, a syrup or a clear drink, the gluconate's solubility is worth its mass. It dissolves without a dispersion to shake and holds a pH close to neutral at 6.0–7.5. The citrate can be dispersed in an opaque drink, but it settles and needs the pack shaken; a clear beverage at a meaningful zinc dose is not its format. In a gummy or a chew, water activity and pH matter more than the assay, and the gluconate adds more water-binding solute per milligram of zinc. In a dry blend, particle size and flow decide segregation, and an 80 mesh gluconate behaves differently from a 40 mesh citrate in the same blender. ## What the label has to say In the European Union the ingredient list names the salt, and the nutrition declaration reports elemental zinc in milligrams and as a percentage of the 10 mg reference value. In the United States the Supplement Facts panel reports elemental zinc against an 11 mg Daily Value, and the ingredient list names the salt. The United Kingdom uses the same 10 mg reference value as the EU. In all three markets the percentage is calculated on the element, not on the salt mass. That is where the two salts diverge on the artwork. A product declaring 10 mg elemental zinc contains about 72 mg of gluconate or about 31 mg of citrate. If the label quantifies the ingredient rather than only the element, the figure has to match the salt in the drum. If it declares only elemental zinc, the ingredient list still has to name the salt, and changing the salt changes the list. The NRV entry explains the reference values, and the compliance page sets out the permitted-form and labelling rules behind them. ## When to choose which - Choose zinc gluconate when a clear solution, a drink or a syrup is the format and the larger powder mass fits. - Choose zinc citrate when capsule fill, tablet weight or stick mass is the constraint and a dispersion is acceptable. - Do not choose either on a taste note alone; trial both at the real zinc concentration and pH. - Run a switch as a change control with a new specification, a new fill weight, new stability data and a new label. The grade page places both salts among their process variants, the COA page shows how the gluconate figures are reported, and the citrate-side comparison gives the same decision from the other salt. The catalogue line for this product is on the zinc gluconate product page. ### 01 What the COA for L-arginine actually contains URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-arginine/coa/ Reviewed: 2026-11-19 An L-arginine certificate answers four questions at once: what the lot is, how much arginine it contains, which enantiomer was measured, and what else is in the drum. The certificate reports an acid–base titration on the dried basis, identification by IR and ninhydrin, specific rotation, loss on drying, residue on ignition, the pH of a 5% solution, particle size, heavy metals and microbiology. The figures below are the catalog specification; the batch certificate confirms the pouch or drum. A titration alone does not establish the L form, or that the material is the free base rather than the hydrochloride. In one lineThe assay reports how much arginine is in the drum; the rotation and the pH report which arginine it is. ## The certificate as a test report A useful certificate can be audited line by line. Each parameter needs the test, the method that produced the number, and the limit the lot was released against. Identity, assay and moisture · L-arginine base | Parameter | Method | Release limit | Appearance | Visual | White crystalline powder | Identification | IR and ninhydrin reaction | Conforms to reference | Assay | Acid–base titration, dried basis | 98.5–101.5% | Specific rotation | Polarimetry, dried basis | +26.3° to +27.7° | Loss on drying | Gravimetric | ≤0.5% | Residue on ignition | Gravimetric, ignited residue | ≤0.1% | pH (5% solution) | Potentiometry | 10.5–12.0 Physical, contaminant and microbiological limits | Parameter | Method | Release limit | Particle size | Sieve analysis | ≥95% through 40 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent The pH line is not a formality. The free base carries a guanidino group that keeps a 5% solution strongly alkaline, and a formulator has to design around that. A pH at the bottom of the window can mean the powder has already taken up carbon dioxide from the air. ## What the titration measures, and what the rotation adds The release assay is an acid–base titration. The titrant, the endpoint technique — indicator or potentiometric — and the calculation belong on the certificate; without them the result cannot be reproduced. The figure is calculated against the dried weight, which is why loss on drying sits beside it. A value slightly above 100% inside the 98.5–101.5% window is method uncertainty, not extra arginine. HPLC answers a different question. Arginine has no useful ultraviolet chromophore, so the method usually relies on derivatisation, ion-exchange separation with post-column ninhydrin, or mass detection. Here HPLC is the confirmatory and impurity method: it shows whether other amino acids travel with the lot and supports the identity IR begins. It does not replace the titration, and the certificate should say which technique produced which number. The dried basis is a correction, not a measurement. Water leaves the calculation through the loss-on-drying result; carbon dioxide taken from the air is not water and is not corrected. That matters for a hygroscopic base: a lot that has absorbed moisture and carbon dioxide can pass the dried-basis assay while its as-is arginine content is lower and its pH sits below the specification. Specific rotation is the chiral measurement. The L form rotates plane-polarised light clockwise, and the catalog window is +26.3° to +27.7° on the dried basis. Rotation depends on solvent, concentration, path length and temperature, so a certificate that omits those conditions cannot be compared with another. A value inside the window is consistent with the L form; a value near zero, or one that has moved across lots, is a finding that IR and titration will not explain. ## Release limit versus batch result The release limit is the gate; the batch result is what the laboratory found. They belong in separate columns, with the method beside each. A specification range printed in the result column proves only that the template was filled in. Not every line tolerates a value near the edge. A rotation just above the floor is inside the window but leaves little room for method variation; a loss on drying close to 0.5% leaves little room for a humid filling room; a pH near the bottom of the window is worth a check for carbonate. None of those is automatically a rejection, but each is worth a question before the lot is accepted. Residue on ignition catches a mineral diluent and some processing residues, but it does not catch the hydrochloride, because the chloride is lost on ignition. When the form is in doubt, ask for chloride. It is not on this catalog certificate, which is why the pH carries the form question and the rotation the chiral one; chloride belongs in the specification wherever the base is bought against a salt-sensitive formula. ## What moves between batches Loss on drying moves with the pack and the season: a pouch opened in a humid room gains water quickly, and a drum liner that is not reseated does the same. pH moves with carbon dioxide, so a lot exposed to air can drift downward while assay and rotation stay inside their windows. Particle size moves with milling, colour with the drying step, and the assay with both moisture and carbonate load. The rotation should not move if the material is the L form. A slow drift across lots is more serious than one value at the edge, because it suggests a change in source, route or purification. ## When to order an outside test Use an outside laboratory for a new source, a first shipment into a regulated market, a form claim the supplier's certificate cannot support, or a disputed result. The useful panel is not a full repeat: polarimetry with conditions stated, chloride by ion chromatography or titration, an HPLC amino-acid profile, ICP-MS for the metals, loss on drying, and an IR spectrum against a reference. Ask the laboratory to report its detection limit and sample preparation. A “not detected” entry means little without its detection limit; the figure describes the method, not the drum. Give the referee the retained sample, the certificate and the specification, and keep the lot code through both. ## What to compare between suppliers Put six lines side by side: the form as named; the assay with its method and basis; the specific rotation with its conditions; pH; loss on drying; and chloride. Two quotations that agree on the assay and diverge on the other five are not describing the same powder. Then check traceability. The lot code should appear on the certificate, the pack and the retained sample, and the certificate should name the producer, not only the trader. Mesh and pack belong in the comparison too: a 40 mesh powder and a milled 80 mesh grade can share every chemical line and still behave differently on the line. The catalog specification sits on the L-arginine product page. The form comparison is on the grades page; the tests that separate the base from the salt are on the identity page; the release workflow is on the quality page. The chromatographic method is described in the HPLC note, and the moisture test in the loss-on-drying entry. ### 02 L-arginine base or hydrochloride: choosing a grade URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-arginine/grades/ Reviewed: 2026-11-19 L-arginine is sold as the free base and as the monohydrochloride, and the two are different label ingredients. The base is strongly alkaline and carries the full mass as arginine; the salt is about 82.7% arginine, brings roughly 17% chloride with it, and gives a solution that is far less alkaline. The catalog form on this page is the base, a crystalline powder with at least 95% passing 40 mesh. The choice between the forms is set by the label, the dose and the matrix, not by which assay figure looks higher on a quotation. In one lineThe label ingredient and the dose decide the form; the assay percentage on the first quotation does not. ## Why the form is a specification question “L-arginine” on a purchase order is ambiguous. The base and the hydrochloride share the arginine entity but not the molecular weight, the counterion, the solution pH or the label name. A certificate for one does not describe the other, and a formulation weighed for one will be wrong if the other arrives. The second axis is physical form. The catalog grade is a crystalline powder with at least 95% passing 40 mesh; an 80 mesh milled grade and a granulated grade are available on request. Mesh changes flow, dust and dissolution rate, not chemistry. Write both axes into the specification: the chemical form and the particle size. ## Base and hydrochloride side by side What changes between L-arginine base and the hydrochloride | Line | L-arginine base | L-arginine hydrochloride | Label name | L-arginine | L-arginine hydrochloride | CAS | 74-79-3 | 1119-34-2 | Formula and molecular weight | C6H14N4O2 · 174.20 | C6H14N4O2·HCl · 210.66 | Arginine per gram | 1.00 g | About 0.827 g | pH (5% solution) | 10.5–12.0 | Weakly acidic; the salt's own COA states the range | Moisture and carbon dioxide | Hygroscopic; absorbs CO2 from air | Hygroscopic; no alkaline surface for the same CO2 reaction | Assay basis | 98.5–101.5% by titration, dried basis, as the base | The salt's specification, calculated as the salt | What the label has to say | L-arginine, the free base | The hydrochloride, with the dose tied to the salt The table is not a ranking. Each form has a job, and the job is decided by the formula and by the label the brand intends to print. ## pH, hygroscopy and the carbonate problem The base is strongly alkaline because of its guanidino group, and the 10.5–12.0 window is part of the specification rather than an incidental measurement. In an acidic blend the base neutralises the acid, and if the blend is sealed — a stick pack or a sachet — the carbon dioxide released has nowhere to go. The result is swelling, pressure and a product that no longer matches its specification. In air, the same chemistry runs slowly. The base takes carbon dioxide and water from the room and forms a carbonate on the surface; pH falls, mass rises, and the powder can cake. The hydrochloride does not present the same alkaline surface, but it is still hygroscopic and it brings a chloride load of about 17% by mass. Neither form is a free pass on packaging, and neither should be left in an open drum. Both forms are freely soluble in water, so solubility seldom decides the choice. What decides it is the pH the formula can carry and the ingredient name the label has to show. ## What the form does to the dose The conversion is arithmetic. One gram of the hydrochloride delivers about 827 mg of arginine; to declare 1,000 mg of arginine from the salt, a formulator needs about 1,209 mg of the salt. The reverse is also true: a label that says 1,000 mg of L-arginine hydrochloride is declaring about 827 mg of arginine, not 1,000 mg. That difference lands on the fill weight. A 500 mg fill of the salt carries about 413 mg of arginine, so the same fill of base and salt is not the same dose. A stick pack has more room, but the acid–base reaction matters more there, because the pack is sealed and the base can drive off carbon dioxide from any acidic component. In a tablet, the alkaline base can affect the pH of the granulation and the choice of excipients; in a chew or gummy, the water and heat of the process add their own questions. The dose decision should be written before the purchase order, not after the first trial. Name the form, the arginine figure the label will declare, and the fill weight the machine can run. ## What to write into the specification - “L-arginine base, CAS 74-79-3, C6H14N4O2; not the hydrochloride.” - “Assay 98.5–101.5% by titration on the dried basis; specific rotation +26.3° to +27.7° on the dried basis.” - “Loss on drying ≤0.5%; residue on ignition ≤0.1%; pH (5% solution) 10.5–12.0.” - “Particle size ≥95% through 40 mesh, or the agreed milled or granulated distribution.” - “Chloride reported for each lot where the formula is salt-sensitive.” - “Heavy metals and microbiology as on the catalog specification; lot code on the pack, the certificate and the retained sample.” If the material is the hydrochloride, every line changes: the name, the CAS, the molecular weight, the assay basis, the pH range and the chloride line. A specification copied from the base and applied to the salt is not a specification; it is a template with the wrong noun. ## When the other form is the wrong answer Do not choose the base for an acidic, sealed powder if the formula has no room for the carbon dioxide it will release. Do not choose the hydrochloride when the label has to read “L-arginine” and the dose is expressed as arginine, unless the label is changed to match the salt. Do not switch forms to fix a flow problem: mesh and granulation are the tools for flow, and changing the salt to solve a hopper creates a labelling problem instead. The catalog form is the base at 40 mesh. The product hub carries the specification; the COA page shows how each line is reported; the base-versus-hydrochloride page works through the dose and label arithmetic; the stability page covers the carbonate and packaging question; the compliance page covers the label name in each market. ### 02.1 L-arginine base vs hydrochloride: dose, pH and the label URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-arginine/grades/arginine-base-vs-hcl/ Reviewed: 2026-11-19 L-arginine base and L-arginine hydrochloride are the same amino acid in two different packages. The base is the whole mass as arginine and gives a strongly alkaline solution; the hydrochloride is about 82.7% arginine, carries roughly 17% chloride, and gives a weakly acidic solution. A form change without new arithmetic changes the dose by about 17%, and a form change without a pH check changes what the formula does in the pack. The label has to name the form that is actually in the drum. In one lineThe two forms carry different amounts of arginine per gram and different solution pH, so the dose and the label have to be recalculated when the form changes. ## Two materials, two sets of numbers The molecular weights do the work. L-arginine base is C6H14N4O2 at 174.20 g/mol. The monohydrochloride adds one molecule of HCl and weighs 210.66 g/mol, so a gram of the salt contains 174.20 ÷ 210.66 = 0.827 g of arginine. The rest is chloride and the proton that goes with it. L-arginine base against the monohydrochloride | Line | Base | Hydrochloride | CAS | 74-79-3 | 1119-34-2 | Formula | C6H14N4O2 | C6H14N4O2·HCl | Molecular weight | 174.20 | 210.66 | Arginine per 1,000 mg | 1,000 mg | 827 mg | Chloride per 1,000 mg | 0 | About 173 mg | pH, 5% solution | 10.5–12.0 | Weakly acidic; the salt's COA states the range | Label name | L-arginine | L-arginine hydrochloride The table is stoichiometric: a lot's assay and moisture move each figure by a percent or two, so calculate from the certificate. The numbers are not a quality ranking. The salt is a legitimate material with its own specification, and the base is a legitimate material with a different one. The question is which one the label and the formula can carry. ## What the form does to the dose The conversion runs in both directions. To declare 1,000 mg of arginine from the hydrochloride, weigh 1,000 ÷ 0.827 = 1,209 mg of the salt. To declare 500 mg of arginine, weigh 605 mg. Going the other way, a label that says 1,000 mg of L-arginine hydrochloride is declaring 827 mg of arginine, not 1,000 mg. The assay basis adds a second correction. A hydrochloride assay is calculated on the salt, so the figure has to be multiplied by 0.827 to reach arginine; the base certificate at 98.5–101.5% on the dried basis is already calculated as the base. Mixing the two conventions in one calculation is a common source of a label that does not reconcile with the batch record. The fill weight follows. A 500 mg capsule fill cannot deliver 500 mg of arginine from the salt: the salt needed for that dose weighs about 605 mg. A stick pack has more room, but the mass of the salt per portion is larger, and the chloride comes with it. Write the declared arginine figure, the form, the assay basis and the fill weight into the same document before the purchase order is placed. ## What the form does to pH and moisture A 5% solution of the base sits at pH 10.5–12.0, and that alkalinity is a formulation property, not an impurity. In a blend with an acid, the base neutralises it; in a sealed stick or sachet, the carbon dioxide released has nowhere to go, so the pack can swell and the pH of the drink moves. The base also takes carbon dioxide from the air, forming a carbonate that pulls the pH down and adds mass that is not water. The hydrochloride solution is weakly acidic, so it does not present the same alkaline surface to carbon dioxide. It is still hygroscopic, and it brings about 17% chloride by mass. In a formula with an acid and a carbonate, the salt can still take part in a gas-producing reaction; “hydrochloride” does not mean “inert”. Both forms are freely soluble in water. Solubility is rarely the deciding factor; pH, the chloride load and the ingredient name are. ## What the form does to the dosage form In a capsule or tablet, the base's alkalinity can affect the granulation, the choice of excipients and the rate of moisture pickup. The salt is easier on the pH but adds mass per unit of arginine, which can push a tight fill weight over the capsule size. In a powder stick, the base can react with an acidic flavour or carrier inside the sealed pack; the salt avoids that particular reaction but not the chloride. In a gummy or chew, water and heat are part of the process, so the pH effect and the moisture pickup both matter. In a ready-to-drink product, the solution pH is the first question: a base at 10.5–12.0 needs a buffer and a flavour plan, while the salt starts closer to neutral but still needs a stability trial. Mesh and granulation are separate choices; they change flow and dust, not the chemistry. ## What the label has to say In the EU, the ingredient list must name the form as it appears in the specification: “L-arginine” for the base, “L-arginine hydrochloride” for the salt. The quantity per portion follows the form that is named. A label that says L-arginine while the drum contains the hydrochloride has two defects: the name is wrong, and the declared quantity overstates the arginine by about 17% of the salt's weight. In the US, the Supplement Facts panel declares the amount per serving, and the ingredient list carries the source. The same rule applies: if the source is the hydrochloride, the panel and the ingredient list have to agree on what the 1,000 mg refers to. There is no Daily Value for L-arginine, so no percentage is shown. Neither market lets the label carry a health claim that is not authorised or substantiated. The form comparison is a composition question; the claim is a separate review on the compliance page. ## When to choose which Choose the base when the label has to say “L-arginine”, the dose is expressed as arginine, the formula can carry a pH of 10.5–12.0, and no chloride is wanted. That covers many capsules, tablets and dry blends where the base is the declared ingredient. Choose the hydrochloride when the label names the salt, the dose is expressed as the salt, the formula needs a less alkaline ingredient, and the chloride is acceptable. It is also the form whose solution is easier to handle in a system that cannot work at pH 11. Choose neither without a trial when the formula is a sealed acidic pack and the label wants the free base. The reaction will still happen, and the pack will show it. The product page carries the catalog base; the grades page sets the form question in the wider range; the COA page shows the assay and rotation lines; the identity page explains how the base is distinguished from the salt; the stability page covers carbon dioxide and the pack. ### 03 L-arginine is alkaline and picks up carbon dioxide; the pack decides the shelf life URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-arginine/stability/ Reviewed: 2026-11-19 L-arginine base is chemically stable as a dry solid, but it is both hygroscopic and strongly alkaline, so it takes water and carbon dioxide from the air. The reaction forms a carbonate, the pH falls, the mass rises and the powder begins to cake; heat and acidic ingredients speed the change. The molecule is not the weak point. The pack, the filling room and the formula decide how long the material stays inside its specification. In one lineA sealed pack keeps the base; moisture, carbon dioxide and heat are what change it, and the pack is the barrier that decides how long. ## The dry solid and its two enemies In a sealed pack at a cool, dry store, the base is stable for the assigned shelf life. The specification's loss on drying of ≤0.5% is tight because the powder is hygroscopic: an open pouch in a humid filling room gains water quickly, and a drum liner that is not reseated gains it over weeks. The first visible result is caking, and a caked powder no longer flows through a hopper or disperses in a stick pack. Carbon dioxide is the second enemy, and it is the one that makes this material different from a neutral amino acid. The free base reacts with CO2 in air to form a carbonate on the surface. That reaction consumes base, adds mass that is not water, and pulls the pH down. A lot can pass the dried-basis assay while its as-is arginine content is lower and its 5% solution sits at the bottom of the 10.5–12.0 window. Packaging is therefore part of the specification, not a purchasing detail. The 1 kg foil pouch and the 25 kg fiber drum are the barrier; the liner and closure decide how well they hold the powder, and a desiccant does not rescue a drum whose liner has been cut and left open. ## In solution: pH, carbon dioxide and heat A 5% solution of the base sits at pH 10.5–12.0. That alkalinity is useful in some formulas and difficult in others: an acidic component will neutralise the base, and the carbon dioxide released in a sealed container has to go somewhere. In an open vessel the solution also absorbs CO2 from the air, so its pH drifts downward while it stands. Heat and time are the other variables. An alkaline solution held warm is a harsher environment than the dry powder, and a reducing sugar in the same solution adds a browning route. A ready-to-drink product needs its own preservation and process design; an unpreserved solution is a risk whatever the assay says. Make a solution shortly before use, or design the formula and process for the shelf life it needs. Measure pH before and after the heat step, and at the end of the intended shelf life. ## What moves the powder and the blend Stability factors for L-arginine base | Factor | Effect | Control | Moisture | Caking; enables carbonate formation | Intact liner; low-humidity filling room; LOD limit | Carbon dioxide | Carbonate on the surface; pH falls; mass rises | Sealed pack; intact liner; short exposure in the room | Heat | Faster colour change and degradation in solution | Set process time and temperature on the real matrix | Acidic ingredients | Neutralisation and CO2 release in a sealed pack | Check the blend pH and the headspace; trial the pack | Reducing sugars and trace metals | Browning, especially with heat | Low free-sugar carriers; metal limits; process water | Light and oxygen | Low direct effect on the base | Protect the blend's most sensitive ingredient The table starts with the factors that act in the pack, before the material reaches a formula. ## A stability protocol for the packed material Run the study on the packed powder, not only on a laboratory jar. Use both catalog packs if both will be sold, and add an open-pack condition to measure pickup in the filling room. Store at 25°C/60% RH and at an accelerated condition such as 40°C/75% RH, with a third condition at 30°C/65% RH if the destination is hot and humid. Test at the start, at three and six months, and at the end of the intended shelf life, with an extra point if anything moves. The panel should include assay, loss on drying, pH of a 5% solution, specific rotation, appearance and colour, and microbiology. Photograph the colour against a standard: “slightly darker” is not a result. Add a stressed sample of the real blend. A stick pack with an acid ingredient held at the process temperature will show whether the pack swells or the pH moves before the assay does. That trial is more informative than a second assay on the same powder. ## Formula decisions that change the shelf life The base is a reactant as well as an ingredient. In a sealed stick with citric, malic or ascorbic acid, it will neutralise the acid and release carbon dioxide; the pack can swell, the pH of the drink moves, and the declared dose may no longer match the label. An effervescent system uses that reaction deliberately, and then the carbon dioxide is the point rather than a defect. In a tablet, the alkaline base can affect granulation, the choice of excipients and the rate at which the tablet picks up moisture. In a gummy or chew, water and heat are added, so the reducing-sugar load and the process temperature become part of the stability question. In a dry blend, the base can sit next to an acidic carrier and react slowly in the bag; check the blend's pH and its headspace after a week, not only on the day of mixing. Granulation can reduce dust and improve flow, but it adds a binder and a water step. Ask whether the granulated grade has its own stability data, and do not assume the powder data covers it. ## Shelf life and the early warnings A 24-month shelf life is common for the intact 1 kg pouch and 25 kg drum, but the number has to come from packed-product data on the same pack, liner and closure. Accelerated data supports the assignment; it does not replace real-time results at the label condition. The retest date on the pack should follow the same data. The early warnings are pH falling, loss on drying climbing, lumps forming, a cream or tan tint, and a pack that has drawn in or swollen. Any of those should trigger a retest and a look at the pack history. Do not extend a shelf life because the titration still passes: carbonate and moisture move the pH first, and the pH is the first thing the formula notices. The catalog form and pack are on the product page; the test lines are on the COA page; the form comparison is on the grades page; the ordering options are on the MOQ page. The loss-on-drying note explains the moisture test, and the quality page covers release, retest and retained samples. ### 04 L-Arginine: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-arginine/moq/ Reviewed: 2026-11-19 The minimum order for L-arginine base is 1 kg, packed as a single foil pouch drawn from a released lot. Production quantities ship in 25 kg fiber drums, and both packs are released against the same specification and carry a lot code. Stock material leaves in 1–7 days; milling, granulation or a specific document pack is scheduled and confirmed on the order acknowledgement. A quotation is built from six details, and the first of them is the form. In one lineOne kilogram from a released lot is the qualification unit; form, pack, destination and documents shape the quotation. ## Why the minimum is one kilogram A 1 kg pouch is enough to run a bench trial, fill a pilot batch, keep a retained sample and send a sample to a laboratory. It is also small enough to be drawn from a single released lot, so the trial, the retain and the production drum can share a common origin if the project moves forward. The alternative — asking a buyer to take a 25 kg drum before the formula is fixed — turns a qualification into an inventory decision. The 1 kg unit separates the two: the buyer tests the material, then orders the drum against the specification that survived the trial. The pouch and its retained sample stay tied to the lot they came from. ## The two packs and what goes on them Catalog packs for L-arginine base | Pack | Construction | What it is for | 1 kg pouch | Foil pouch with an inner liner and a closure | Trial, sample, small batch, retain | 25 kg drum | Fiber drum with an inner liner | Production; the liner is the moisture barrier | Label fields | Product, form, lot code, net mass, manufacture and retest dates, storage statement | Ties the pack to the certificate The drum is not a sealed unit on its own. The liner is the barrier, and a drum that has been opened for sampling has to be closed with the liner folded and the lid refitted. If the material will be held for months after the first opening, plan the pack size around the usage rate rather than around the size of the drum. ## Lead time and what changes it Stock material ships in 1–7 days from the order acknowledgement. The clock starts when the form, the specification version, the quantity and the destination are confirmed, not when an enquiry arrives. Three things add time. A non-standard mesh or a granulated grade has to be scheduled through milling or granulation. A destination that needs extra documents or a specific label language adds document time. A quantity that exceeds the packed stock has to be packed from bulk and released against the certificate before it ships. In each case the date is confirmed in writing; an enquiry is not a reservation. ## The six details a quotation needs - The form: L-arginine base, with the mesh and the specification version named. - The quantity and the pack split: total kilograms, and how much in 1 kg pouches and how much in 25 kg drums. - The destination and the Incoterm, because both change the document set and the freight. - The documents and the label language required, including any market-specific statement. - The date the material is needed at the filling line, not only the date the order is placed. - Whether this is a sample, a first production lot or a repeat, and whether the lot must match a previous delivery. A quotation that omits any of the six is a range, not an offer. The reply should come back with the specification version, the pack plan, the lead time and the document list attached. ## Samples and the retained sample A sample should be drawn from a released lot, not from a bulk blend that has not been tested. Ask for the certificate of the lot the sample came from, and keep a portion of the sample under the same conditions as the production pack. When the production order arrives, compare its lot code with the sample's: if they differ, the trial was run on a different material, even when the specification is the same. The supplier should also retain a sample of each lot for the agreed retention period. That retained sample is the reference if a result is disputed later, and it is the reason the lot code has to appear on the certificate, the pack and the retain. ## Terms worth writing into the order The purchase order should name the form, the specification version, the mesh, the pack, the lot code rule and the documents required with each lot. It should also state the acceptance tests the buyer will run on receipt, the retest date, and what happens if a result falls outside the specification. Three clauses cover most disputes. A change-control clause: any change in source, site, route, mesh or pack requires notice and a new specification. A certificate clause: each lot ships with its own COA, not a certificate from a previous lot. A non-conformance clause: the remedy, the return route and the responsibility for the retained sample are agreed before the first drum ships. Payment terms and the Incoterm belong in the quotation, and the delivery date belongs in the acknowledgement. None of them substitutes for the specification. The product page carries the catalog form; the COA page shows the test lines; the stability page covers the pack and the storage statement; the compliance page lists the documents a market may require. The MOQ note, the lead-time note and the retained-sample note define the terms used here. ### 05 Where L-arginine is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-arginine/compliance/ Reviewed: 2026-11-19 L-arginine is an amino acid, not a vitamin or a mineral, so the EU food-supplement directive does not place it on the harmonised vitamin and mineral lists; member states may set the level and notification rules for amino acids. In the United States it is a dietary ingredient, in Great Britain the retained framework applies, and Northern Ireland follows the EU regime. Permission is only the first check. The contaminant limit, the label wording and the claim are separate questions, and a file that answers only “is it allowed” has not answered any of them. In one linePermission, contaminant limit, label wording and claim are four separate checks, and the file has to answer each one for the market. ## Three markets, three instruments One certificate can satisfy one market and fail another; the current text and the destination's rule decide the file. Which instrument controls what · L-arginine | Market | Main instruments | What they settle | European Union | Directive 2002/46/EC; Regulations 1169/2011, 1924/2006, 2015/2283 and 2023/915 | Supplement status, labelling, claims, novel food history and contaminants | United States | FD&C Act as amended by DSHEA; 21 CFR 111 and 101.36 | Dietary ingredient status, cGMP, Supplement Facts | United Kingdom | Retained food law and the Food Supplements Regulations 2003; Food Information Regulations 2014 | Permission and labelling in Great Britain; Northern Ireland follows the EU This is a sourcing reference, not legal advice; the current text and the brand's sign-off decide. ## The European Union: outside the vitamin and mineral lists Annexes I and II to Directive 2002/46/EC list the vitamins and minerals permitted in food supplements and their forms; L-arginine is neither. The Directive still sets the labelling particulars, but permission and level for an amino acid come from general food law and the member state where the product is sold. Some member states set a maximum, require a notification or restrict a form; there is no single EU answer to “how much is allowed”. The novel food question is separate. L-arginine has a documented food history before 15 May 1997 and is not a novel food as of this review. Document that position rather than assume it: if the history cannot be shown, the burden moves to the buyer. Labelling follows Regulation (EU) No 1169/2011 and the supplement particulars in the Directive, including the amount per portion. L-arginine has no Nutrient Reference Value in Annex XIII, so a percentage of an NRV cannot be shown. Great Britain applies the retained framework and Northern Ireland the EU rules under the Windsor Framework; the two can diverge after an amendment. ## The United States: a dietary ingredient under DSHEA L-arginine is sold in the US as a dietary ingredient under section 201(ff) of the FD&C Act. For an amino acid with a pre-1994 history, the basis is normally the pre-1994 marketing route, not a new dietary ingredient notification; the supplier's file should say which. The buyer's obligation is separate. Under 21 CFR 111 the manufacturer must test the identity of each component on receipt. The Supplement Facts panel is set by 21 CFR 101.36: it declares the amount of L-arginine per serving, and because the amino acid has no Daily Value, no percentage is shown. A structure or function statement is possible if it is truthful, substantiated and accompanied by the DSHEA disclaimer in 21 CFR 101.93; a disease claim is not. The FDA does not approve a supplement label before marketing, so the file is the brand's evidence. ## Contaminants: specification against law The heavy-metal lines are specification terms, and three coincide with a legal maximum; a limit at the maximum leaves nothing for analytical uncertainty. Catalog limits and the EU position for food supplements | Parameter | Catalog limit | EU legal position, as of this review | Lead (Pb) | ≤3 mg/kg | 3.0 mg/kg maximum; the catalog sits at the line | Cadmium (Cd) | ≤1 mg/kg | 1.0 mg/kg maximum; the catalog sits at the line | Mercury (Hg) | ≤0.1 mg/kg | 0.10 mg/kg maximum; the catalog sits at the line | Arsenic (As) | ≤2 mg/kg | No harmonised EU maximum for supplements; the line is contractual The limits apply to the finished supplement, not only the ingredient: a compliant powder can still exceed a limit if the daily dose is high or other ingredients add metals. In the US there is no federal lead maximum; California's Proposition 65 assesses exposure per daily dose, with a maximum allowable dose level of 0.5 µg/day for lead and a no-significant-risk level of 15 µg/day. ## Claims and the label In the EU and the UK, health claims are governed by Regulation (EC) No 1924/2006 and its retained equivalents, and a claim must appear in the register before use. As of this review the EU register carries no authorised health claim for L-arginine. Compositional statements are a different category: “L-arginine 500 mg per capsule” describes the product, and the figure has to match the specification and the certificate. In the US the structure or function route is open with the disclaimer and rests on substantiation held by the brand owner; it does not extend to a disease. The same wording cannot be carried into the EU or the UK, where the register decides. File the claim evidence apart from the specification. For the base, the declared quantity is the arginine figure. If the material is the hydrochloride and the label says “L-arginine”, the declaration overstates the arginine by about 17% of the salt's weight. The grades page and the base-versus-hydrochloride page work through that arithmetic. ## What the file must contain - A batch certificate that names the method and basis for each result, with the lot code matching the pack. - The versioned specification it was released against, naming the form and the mesh. - A safety data sheet and an allergen statement for the material and the pack. - A site and country-of-origin statement naming the actual producer. - An EU novel food statement that documents the pre-1997 use, not just the conclusion. - A US dietary ingredient statement, or a notification for a genuinely new form. - A food-contact declaration for the pouch and liner, in the form the destination requires. - A stability summary, the assigned shelf life and any halal or kosher certificate. ## A short review checklist - Name the market, and for the EU the member state of sale. - Confirm that the specification and label name L-arginine base, not a blend or a salt. - Check the destination's level rule and notification requirement, not only the EU position. - Compare each contaminant limit with the legal maximum and write down the margin. - Check the declared quantity against the form: base or hydrochloride. - Test the claim wording against the EU or GB register, or the US substantiation file. - Keep the specification, the certificate and the label on the same version and the same lot code. The framework for each market is set out on the EU regulatory page, the US page and the UK page. The release tests are on the COA page; the identity evidence is on the identity page; the product page carries the catalog specification. Annex II and heavy metals are defined in the glossary, and the site's position is set out in the editorial policy. ### 06 How we prove an L-arginine lot is the L base URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-arginine/identity/ Reviewed: 2026-11-19 Identity for L-arginine is proven in layers, not by one number. The document set ties the lot to a specification; IR establishes the functional groups and ninhydrin confirms the amino group; the specific rotation establishes the L configuration; and the titration, HPLC, pH and impurity lines establish how much of the base is present and what else is in the drum. The layers have to agree: a clean assay with no rotation has not shown the L form, and a rotation with no pH has not shown the free base. In one lineThe rotation proves the L form, the titration measures the base, and the pH and chloride lines show whether the salt has replaced it. ## The four layers of identity What each identity layer proves and misses | Layer | Test | What it proves | What it misses | Document | Specification, COA, lot code | The lot is described and traceable | Whether the drum matches the paper | Spectrum | IR against a reference; ninhydrin | The functional groups are those of an amino acid | Purity, and the identity of a close analogue | Chiral | Specific rotation | The L configuration, and a gross excess of the D form | A small enantiomeric impurity inside the method's uncertainty | Quantitative | Titration, HPLC, pH, LOD, residue, chloride | How much base is present, and what dilutes it | A non-titratable organic at low level The layers are not interchangeable: IR can match while the rotation is low, and the titration can pass while the pH says hydrochloride. A useful certificate carries all four; the buyer's test checks the paper belongs to the drum. ## Titration, HPLC and rotation, read together The release assay is an acid–base titration on the dried basis, against a 98.5–101.5% release window. HPLC is confirmatory: with no useful ultraviolet chromophore, arginine needs derivatisation, ion-exchange with post-column ninhydrin, or mass detection. Compare both on the same basis; a dried-basis titration and an as-is HPLC result cannot be set against each other. When the two agree within their uncertainty, the lot behaves like a single amino acid. A high titration with a low HPLC can mean a titratable impurity the chromatogram does not see, a derivatisation problem, or another basic compound with a similar equivalent weight. A low titration with a high HPLC can mean moisture, a non-titratable diluent or a salt; the chromatogram and the sample preparation are the next step. The rotation is the third signal. The L form turns plane-polarised light clockwise and must read +26.3° to +27.7° on the dried basis. Because the rotation depends on solvent, concentration, path length and temperature, the certificate must state them. A clean HPLC with a rotation below the window points to the D form or a racemate; a rotation inside the window with a low titration points to a diluent. pH is the fourth signal, and the quickest form check. A 5% solution of the base sits at 10.5–12.0. A solution in the weakly acidic range means the free base has been neutralised or replaced by the hydrochloride. ## IR, XRD and the solid state IR is the identity test on the certificate. It is run against a reference under the same conditions, and the certificate should name the technique: a KBr disc, an attenuated total reflectance accessory and a mull can give different relative intensities. Ninhydrin is a chemical identification; it shows an amino group, not the whole molecule, so it supports IR rather than replacing it. XRD asks whether the solid is crystalline, which form is present, and whether a crystalline diluent such as sodium chloride is in the drum. It is not a routine COA line for L-arginine, and a clean pattern does not replace the chromatogram or the rotation. Reach for XRD when a supplier claims a specific solid form, when a milled grade behaves differently from the reference, or when a dispute turns on what the powder is. For a milled or granulated grade, ask whether the process changes the crystal form and whether XRD data exists for the finished grade. A particle-size change is not a form change, but the question is easier before the specification is fixed. ## The adulterants that fit the assay Adulterants and the lines that catch them | Adulterant | Why it can pass a rough check | What catches it | L-arginine hydrochloride | Contains arginine; the mass is higher per unit of base | pH; chloride; IR; label | Other amino acids (ornithine, citrulline, glycine) | Similar acid–base behaviour; similar titration | HPLC profile; ninhydrin; rotation | D-arginine | Same formula and mass; same titration | Specific rotation; chiral HPLC | Water | Corrected out of a dried-basis assay | Loss on drying; as-is calculation | Carbon dioxide (carbonate) | Not water, so loss on drying misses it | pH; acidification with CO2 release | Mineral or organic diluent | Adds mass without contributing to the peak | Residue on ignition; HPLC; LOD The hydrochloride is the most plausible substitution because it is a legitimate material with a legitimate certificate. Residue on ignition will not catch it: the chloride is lost on ignition, and the ash can stay low. pH and chloride separate the salt from the base, which is why a chloride line belongs in the specification even though the catalog certificate does not carry one. Other amino acids are caught by the chromatogram, not the percentage. Ornithine and citrulline are close enough in structure and acid–base behaviour to keep a titration inside the window, and glycine is a common diluent; the HPLC profile and rotation are the evidence. Water is the simplest diluent: a wet lot can pass a dried-basis assay while the as-is powder contains less arginine, so read loss on drying with the assay. ## How to write the identity block - “L-arginine base, CAS 74-79-3, C6H14N4O2; not the hydrochloride.” - “Identification: IR conforms to reference, technique stated; ninhydrin reaction conforms.” - “Assay 98.5–101.5% by titration on the dried basis; HPLC confirmatory, with column and detector named.” - “Specific rotation +26.3° to +27.7° on the dried basis; solvent, concentration and temperature stated.” - “Loss on drying ≤0.5%; residue on ignition ≤0.1%; pH (5% solution) 10.5–12.0.” - “Chloride reported for each lot; heavy metals and microbiology as on the catalog specification.” - “No added amino acids, salts or diluents; particle size ≥95% through 40 mesh or the agreed distribution.” The composition statement turns identity into a specification. Make it part of the signed specification, not a later note, and state the chloride line. ## Five questions for the supplier - Is this the free base or the hydrochloride, and does the certificate say which? - What are the specific rotation and its conditions, and what is the assay basis? - What are the pH, loss on drying and chloride results for this lot? - Can you send the HPLC chromatogram and the IR spectrum, not only the table of results? - Which lot code ties the certificate to the drum, and how has the pack been stored? The five replies should line up with the certificate and with each other. The product page carries the catalog specification; the COA page shows where each test sits; the grades page covers the form; the base-versus-hydrochloride page works through the label arithmetic; the HPLC note explains the chromatogram, and the retained-sample note covers the sample chain. ### 01 What the COA for L-citrulline actually contains URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-citrulline/coa/ Reviewed: 2026-11-19 The certificate for an L-citrulline lot reports appearance, identification by IR and the ninhydrin reaction, assay by titration on the dried basis, specific rotation, loss on drying, residue on ignition, the pH of a 5% solution, particle size, the heavy-metal panel and microbiology. Each row should carry the test, the method, the release limit and that lot's result. Every figure quoted on this page is the catalog specification; the batch certificate is the document that speaks for one drum. In one lineThree lines decide the lot: the titration for how much, the rotation for which form, and the loss on drying for what the percentage is measured against. ## The certificate as a test report A certificate is auditable when each line states the test, the method, the release limit and the result the laboratory obtained. Four columns, not two: a titration and an HPLC assay of the same powder can differ by a percentage point while both are correct, and the reader cannot compare two suppliers without knowing which was used. Identity, assay and moisture · L-citrulline | Parameter | Method | Release limit | Appearance | Visual | White crystalline powder | Identification | IR and ninhydrin reaction | Conforms | Assay, dried basis | Titration | 98.5–101.5% | Specific rotation | Polarimetry, dried basis | +21.5° to +23.5° | Loss on drying | Gravimetric | ≤0.5% | Residue on ignition | Gravimetric | ≤0.1% | pH, 5% solution | Potentiometry | 5.0–7.0 Physical, contaminant and microbiological limits | Parameter | Method | Release limit | Particle size | Sieve analysis | ≥95% through 40 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent Two rows carry conditions that belong beside the number. The rotation needs its solvent, concentration, path length and temperature on the line; water and 6 M hydrochloric acid do not give the same reading. The pH is defined at 5% in water, so a figure taken on a 1% solution is a different test wearing the same name. ## Titration, rotation and the dried basis The release assay is a titration. It measures the acid–base character of the dissolved amino acid against a standardised titrant, with a potentiometric or indicator end point. That makes it a quantity test: it counts titratable material and does not separate citrulline from another amino acid that titrates nearby. The certificate should name the titrant, the solvent and the end-point method, because those choices define what the percentage means. HPLC is the separating method, and here it is the second line of evidence rather than the release assay. Citrulline has no strong chromophore, so the method either reads the amide bond at low ultraviolet wavelength or derivatises the amino group before detection; each route has its own interference profile. The report should name the column, the wavelength and the standard. The technique is described in the HPLC method note. The dried basis decides what the percentage is a percentage of. Water is not citrulline, so the result is corrected for loss on drying: take an as-is result of 98.2% with 0.4% water, and the dried-basis figure is 98.2 ÷ 0.996 = 98.6%. Both figures are true; only one of them is comparable with a certificate that states its basis, and the correction cannot be checked unless the water figure is on the same page. Residue on ignition counts what remains after the organic material burns away, which catches inorganic carry-over from neutralisation and ion exchange. The pH of the 5% solution is the quickest check on those same steps: citrulline is a zwitterion and its solution sits near neutral, so a reading at the edge of 5.0–7.0 usually means residual acid or base rather than a different molecule. ## Release limit versus batch result The release limit is the gate; the batch result is what the laboratory measured. They belong in separate columns, with the method beside them. A result column filled with the specification range is not a result; it is a copy of the gate, and it says nothing about the drum in front of the buyer. Identification is reported as conforms and microbiology as a count or an absence, and those are legitimate results. Assay, rotation, loss on drying, residue and pH are numbers and should appear as the figure obtained. The distinction matters at the edge: a lot at 98.4% assay is outside the window, and a lot at +21.4° rotation is outside as well, a failure that points at the configuration rather than at the drying step. ## What moves between batches Assay and rotation move with the route and the crystallisation. Fermentation and synthetic routes built on arginine both leave traces of related amino acids, and purification decides how much; the rotation responds to optically active impurities, so it can move while the titration still reads in range. Water moves with the drying step and the filling room, and a lot dried to 0.2% can approach the 0.5% limit before it is packed. pH moves with ion-exchange elution and neutralisation, particle size with the mill and the sieve, colour with drying temperature and trace iron. One result near an edge means little; a trend across six lots, with the rotation falling and the water climbing, says that the process or the packing room has changed. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a form claim the certificate does not prove, or a disputed result. The useful panel is short: specific rotation with the conditions stated, an HPLC assay against an external standard, a chiral separation if the configuration is in question, and ICP-MS for the metals. One sample, one report. Ask the laboratory to state its limit of detection for any impurity screen, including the D-enantiomer; a “not detected” line without a limit is evidence about the method, not about the sample. If a result is contested, give the referee the retained sample, the certificate and the specification, and ask for the tests that separate the possible causes rather than a repeat of the same panel. ## What to compare between suppliers Put six lines side by side: declared form, assay with its method and basis, rotation with its conditions, loss on drying, pH, and particle size with the mesh. Two quotations that agree on assay and diverge on the other five are not describing the same powder, even when both are accurate. Then check traceability. The lot code should be identical on the certificate, the drum label and the retained sample, and the certificate should say who manufactured the lot and by which route. A correct certificate can still belong to a drum that is not on the loading dock. The catalog specification sits on the L-citrulline product page. The form comparison is on the grade page, the tests that separate the L form from a blend are on the identity page, and the release workflow is described on the quality page. The moisture limit is defined in the loss on drying note. ### 02 L-citrulline or citrulline malate: choosing a grade URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-citrulline/grades/ Reviewed: 2026-11-19 L-citrulline and citrulline malate are different ingredients, not two purities of one. The free amino acid is 100% citrulline by mass and its 5% solution sits at pH 5.0–7.0; the malate carries 57–72% citrulline depending on the ratio and reads acidic. A switch between them changes the milligram figure, the taste and the name on the panel. In one lineThe malate is a different ingredient, not a different mesh: it carries 57–72% citrulline by mass and an acidic solution, so the label, the milligram figure and the taste all move together. ## Why a single molecule has grades Purity is not the question here. Both forms can meet their own certificate at 98% or better. The question is what the powder contains besides citrulline, and the answer decides how much powder a label figure needs, how the blend behaves in the plant, and what the ingredient list is allowed to say. A purchase order that says “citrulline” without naming the form leaves several quite different materials open. The form also decides which specification applies. The catalog sheet on the L-citrulline product page describes the free amino acid: titration assay 98.5–101.5% on the dried basis, rotation +21.5° to +23.5°, loss on drying ≤0.5%. None of those limits can be lifted onto a malate and expected to mean the same thing, because the mass now includes malic acid. ## The two forms side by side Citrulline is 175.19 g/mol and malic acid is 134.09 g/mol. A 1:1 molar salt is therefore 56.6% citrulline; two citrulline units to one malic acid gives 484.47 g/mol of salt, of which 350.38 g is citrulline, or 72.3%. Commercial material also uses a mass ratio of two parts citrulline to one part malic acid, which is 66.7% citrulline. The convention explains why a “citrulline malate 2:1” label can declare anything between roughly 67% and 72%. Citrulline content by form and ratio | Form | Citrulline by mass | 5% solution | Panel names | L-citrulline | 100% | pH 5.0–7.0 | L-citrulline | Citrulline malate, 1:1 molar | 56.6% | Acidic | Citrulline malate | Citrulline malate, 2:1 molar | 72.3% | Acidic | Citrulline malate | Citrulline malate, 2:1 by mass | 66.7% | Acidic | Citrulline malate The ratio convention is not a detail to leave to the supplier. Ask whether the figure on the certificate is molar or by mass, and ask for the malic acid result beside the citrulline result so the ratio can be calculated rather than accepted. ## Water, flow and acidity The free amino acid is a crystalline powder at 40 mesh. It takes up little water in ordinary handling, flows predictably, and is the easier of the two to keep as a free-flowing solid through a capsule line. Its solution is close to neutral, so it contributes almost no acid to a blend. Malic acid is hygroscopic, and a malate powder therefore takes water more readily than the free amino acid. In an open room it softens, sticks to the dosator and cakes in the bag. The effect grows if the material is a dry blend of citrulline and malic acid rather than a reacted salt: the two components can segregate, and a sample taken from the top of a drum may not represent the acid load at the bottom. Acidity is the second difference with practical consequences. The malate's solution is acidic enough to matter to an enteric coating, to a carbonate in the same blend, and to the flavour system in a drink. The free amino acid leaves that decision to the rest of the formula. Moisture behaviour is followed further on the stability page. ## What the label figure needs in powder A formula is usually written around a citrulline figure, not around a salt weight. Dividing that figure by the citrulline fraction gives the powder weight: 3 g of citrulline is 3 g of the free amino acid, 5.3 g of a 1:1 malate, or 4.2 g of a 72.3% malate. Between the two malate conventions the multiplier runs from about 1.4 to 1.8. That multiplier decides the dosage form. A 500 mg capsule can hold 500 mg of the free amino acid but only about 360 mg of citrulline as a 72% malate, so a formula built on capsules may not reach the same label figure without more capsules. A stick pack or a drink mix has the room; the malate's acid then becomes a flavour decision. None of this is a claim about what the ingredient does in the body; it is the arithmetic that decides which form fits the pack. ## Writing the specification for each form For the free amino acid the catalog sheet is the starting point: name, CAS 372-75-8, assay by titration on the dried basis, identification by IR and ninhydrin, rotation with its conditions, loss on drying, residue on ignition, pH at 5%, mesh, metals and microbiology. Each line is measurable on that material without interpretation. A malate specification needs different lines: citrulline content, malic acid content, the ratio and its basis, pH, water, and particle size. A certificate that reports a single “assay 98%” for citrulline malate defines nothing, because the same total can be built from different proportions of the two components. Ask for both figures, then do the division yourself. ## When the switch is the wrong move Do not substitute the malate where the panel already says L-citrulline. The ingredient name, the declared quantity and the certificate all change together, and a brand that keeps the old artwork with the new powder has a mismatch that a label review will find after the print run. The reverse is equally true: a formula written and tested around the malate is not the same formula with the free amino acid dropped in at the same weight. Skip the malate when the blend carries an acid-sensitive partner, when the capsule is already at its fill limit, or when the customer's specification is written around the free amino acid's rotation and assay. Skip the free amino acid when the acid is part of the flavour design and the label already names the malate. The label, the specification and the purchase order should name one form, once. The form-by-form comparison for a powder blend is on the citrulline versus malate page. The release tests are on the COA page, and the market rules for the two names are on the compliance page. The specification note explains why a limit without a method is not a specification. ### 02.1 L-citrulline vs citrulline malate: dose, acid and the label URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-citrulline/grades/citrulline-vs-malate/ Reviewed: 2026-11-19 A gram of L-citrulline is a gram of citrulline; a gram of citrulline malate is roughly 0.57–0.72 g of citrulline and the rest malic acid. Matching the label figure therefore means weighing more powder, and the extra weight arrives with an acid load that changes the taste, the flavour system and the pH of the blend. In one linePer gram the free amino acid carries all of the citrulline and the malate carries 57–72%, so matching the label figure means weighing more powder and accepting more acid. ## The mass conversion Citrulline is 175.19 g/mol and malic acid is 134.09 g/mol. A 1:1 molar salt weighs 309.28 g/mol and holds 56.6% citrulline. Two citrulline units to one malic acid weigh 484.47 g/mol and hold 72.3%. A blend made at two parts citrulline to one part malic acid by mass holds 66.7%. All three are sold under the same name, which is why the ratio has to be stated with its basis rather than assumed. Citrulline content and the powder a 3 g figure needs | Form | Citrulline by mass | Powder for 3 g citrulline | Citrulline in 1 g | L-citrulline | 100% | 3.0 g | 1,000 mg | Citrulline malate, 1:1 molar | 56.6% | 5.3 g | 566 mg | Citrulline malate, 2:1 molar | 72.3% | 4.2 g | 723 mg | Citrulline malate, 2:1 by mass | 66.7% | 4.5 g | 667 mg ## The dose question is a conversion The panel states a quantity, and the first thing to establish is what that quantity refers to. A panel reading “citrulline malate 6 g” delivers 3.4 g of citrulline at 56.6% or 4.3 g at 72.3%, a spread of almost a gram from the same label figure because the ratio is not on the label. A panel reading “citrulline 3 g” has already done the conversion for the buyer, and a tub of malate behind that panel needs 4.2–5.3 g of powder per serving. That is the whole of the dose question on this page: arithmetic between the salt weight and the citrulline weight. It is not a recommendation about how much anyone should take, and it does not depend on what the ingredient is expected to do. What it does decide is whether the serving fits the pack. A capsule holds hundreds of milligrams rather than grams, so any multi-gram serving becomes a powder or a large capsule count, and the malate makes that count larger. ## The acid the malate brings Malic acid has two carboxyl groups with pKa values near 3.40 and 5.11, so a solution of the malate reads clearly acidic, while the free amino acid's 5% solution sits at pH 5.0–7.0. In a flavoured powder that difference is a taste decision: the malate supplies some of the sharpness a fruit flavour expects, and the formulator adjusts sweetener and buffer around it. In a capsule it is a compatibility question for the shell and any coating, and in a blend it is a question for any acid-sensitive partner. Acidity also travels with water. Malic acid is hygroscopic, and a malate powder picks up water more readily than the free amino acid, which shows as stickiness in the hopper and caking in an opened pack. If the material is a dry blend rather than a reacted salt, the two components can segregate, so the acid load in a scoop is not guaranteed to match the average on the certificate. ## What each form fits The free amino acid fits a capsule or tablet where the fill is measured in hundreds of milligrams, and it fits a neutral powder where the flavour system is doing the work. Its near-neutral solution leaves the acid decision to the rest of the formula and adds no acid load to a blend that already carries one. The malate fits a flavoured stick or drink where the acidity is wanted and the serving is measured in grams. It is the harder material in a dry room and the easier one to taste, and it makes the label arithmetic longer because the ratio has to be defined. Neither form is excluded from any of these packs; the difference is how much room the formula has and how much acid it can carry. ## What the label has to name The ingredient list has to name the material that is in the tub. Under the EU labelling regulation, the US supplement facts rules and the retained UK rules, the declared ingredient and the declared quantity must match; a tub of malate cannot be sold under a panel that says L-citrulline, and the reverse is equally true. Where a citrulline figure is derived from a malate, the derivation and the ratio belong in the specification and in the label review, not in an assumption made at the filling line. A “2:1” claim on the front of a pack means nothing until it says whether the ratio is molar or by mass, because the two readings are 72.3% and 66.7% citrulline. Ask for the definition in writing, then check it against the certificate's citrulline and malic acid results. ## When each one is the right choice Choose the free amino acid when the panel already says L-citrulline, when the capsule is the pack, when the blend carries an acid-sensitive partner, or when the specification is written around the rotation and the titration. Choose the malate when the panel names it, when the serving is a flavoured powder, and when the acid is part of the design rather than an accident. Choosing a form for a new formula | If the formula is | Then the form is | Because | A capsule at 500 mg fill | L-citrulline | All of the mass is citrulline | A flavoured stick pack | Either, ratio declared | The acid is a taste decision | A blend with a carbonate | L-citrulline | No added acid | A panel naming the malate | Citrulline malate | The name and the powder must match | A spec around rotation and titration | L-citrulline | The malate does not meet those lines The parent comparison is on the grade page, the identity tests that separate the forms are on the identity page, and the label rules for each market are on the compliance page. The catalog specification for the free amino acid is on the product page, and the assay basis is explained in the COA page. ### 03 L-citrulline is stable dry; moisture and the matrix decide the rest URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-citrulline/stability/ Reviewed: 2026-11-19 Dry crystalline L-citrulline is chemically stable in a sealed pack: its assay and its rotation do not drift on their own. What moves a lot off its specification is water, and after water the matrix: a reducing sugar, an acid pH, a warm filling room or a wet blend. The loss-on-drying limit of ≤0.5% is where the pack and the room meet the specification. In one lineThe dry crystal is the easy part: water, heat with a reducing sugar and a wet matrix are what move a lot off its specification. ## The dry solid L-citrulline is a small crystalline amino acid whose only hydrolysable bond is the ureido group, and it carries no volatile component. The dry powder is therefore not the part of the shelf life that needs attention, and it is not deliquescent in the way a chloride or a lactate is. That is why the specification can hold water at ≤0.5% and still be met by an ordinary drying step. The failure that does occur is physical. At high humidity the surface of the crystals takes water, particles stick, and a 40 mesh powder that flowed on the day of packing can arrive as lumps. A caked powder may still assay inside the window, which is why the complaint never appears on a certificate: the certificate reports the lot at release, not the drum after three weeks in a warehouse. ## Once it is in water Citrulline dissolves freely and the 5% solution sits between pH 5.0 and 7.0. In a liquid the questions change. Water activity above the microbial threshold allows growth, and an amino acid is a nitrogen source, so an unpreserved aqueous concentrate is a microbiological risk before it is a chemical one. The amino group can also react with a reducing sugar through the Maillard pathway, which shows as browning and a falling assay in a sweetened drink that has been pasteurised or heated. The ureido group is the chemically fragile part of the molecule, but the conditions that attack it are strong acid or strong alkali with heat, not a beverage stored at ambient temperature. ## What actually moves the number Four variables explain most of the variation between a lot that passes at release and the same lot eighteen months later: water, temperature, pH and what else is in the blend. Light and oxygen matter far less for this molecule than for a vitamin, and compression matters through the water and heat it adds rather than through pressure alone. Stability factors for L-citrulline and the control for each | Factor | What it does | Control | Water activity | Caking, flow loss, microbial growth in liquid | Sealed foil pouch, intact drum liner, dry room | Temperature | Faster browning with sugars; softening in storage | Store below 25 °C, out of roof heat | pH | Maillard rate; attack on the ureido group at extremes | Keep the finished matrix near neutral where possible | Reducing sugars | Browning and assay loss in a sweetened blend | Water activity control, lower heat load | Metal ions | Trace iron and copper accelerate browning | Stainless contact, metal panel on the certificate | Compression | Local water and heat in a tablet press | Control room humidity, short dwell time | Light and oxygen | Minor for the solid; slow in solution | Opaque pack, normal headspace ## A protocol that answers the question A stability protocol for a supplement ingredient borrows the ICH-style conditions because they are the common language of the industry, not because a food ingredient is legally required to follow them. Long-term runs at 25 °C/60% RH, intermediate at 30 °C/65% RH, accelerated at 40 °C/75% RH. The pulls are only useful if the panel matches the specification: assay, rotation, loss on drying, pH, appearance and microbiology. Conditions and what each one answers | Condition | Duration | Question it answers | 25 °C / 60% RH | 12–24 months | Does the lot stay in specification on a normal shelf? | 30 °C / 65% RH | 6–12 months | Does a warm market change the answer? | 40 °C / 75% RH | 6 months | What fails first when the pack is stressed? Rotation belongs in the panel for a reason. It is the identity line, so a fall there means the molecule changed rather than the water content; an assay that stays in range while the rotation drifts is a different kind of failure and should be read that way. ## The matrix decides more than the powder In a stick pack the matrix is sugar, acid, flavour and the active, and the water activity of the finished powder decides the shelf life rather than the water content of the citrulline. In a drink the pH decides: an acidic base slows browning but puts any acid-labile partner at risk. In a tablet the compression step and the lubricant matter more than the active. In a capsule the shell is a water path, and a hygroscopic partner pulls water through it until the fill softens. The practical request to a supplier is therefore not “what is your shelf life” but “what is the water activity and the packaging of the blend you tested”. The raw-material certificate describes the powder at release; the finished-product data describes the product that will be sold. ## Assigning a shelf life The shelf life is the shorter of the molecule's and the pack's. A sealed foil pouch keeps the powder dry; a fiber drum with an intact liner does the same at 25 kg, and an opened drum in a humid room restarts the clock. A figure such as 24 months is a conclusion from data for a named pack and a named storage condition, not a property of L-citrulline, and a supplier who quotes it without the pack and the condition has not said anything a buyer can use. The certificate is not a shelf-life statement. It describes the lot at release, and the retained sample is what allows a later dispute to be settled. The pack and the terms around shipment are on the MOQ and ordering page; the release tests are on the COA page, and the water limit is defined in the loss on drying note. The product page carries the catalog specification, and the quality page describes how a release decision is recorded. ### 04 L-Citrulline: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-citrulline/moq/ Reviewed: 2026-11-19 L-citrulline ships from 1 kg: a foil pouch filled from a released lot, with that lot's certificate in the box. The standard drum is 25 kg, the lead time is 1–7 days from released stock, and a quotation becomes usable when it names six things. Below 1 kg what is lost is traceability, not material. In one lineOne kilogram from a released lot with that lot's certificate is the minimum; mesh, pack, quantity and destination decide the rest. ## Why the minimum is 1 kg A 1 kg minimum is a working minimum, not a marketing number. It is enough for a bench trial, a capsule fill run, a stability pull and a retained sample, and it is drawn from a lot that has already been released, so the certificate in the box matches the powder in the bag. Smaller repacks are possible, but each one is a new container, a new label and a weaker link to the lot, and a buyer who needs 200 g usually needs a sample rather than a purchase. The next step is the 25 kg drum, the unit that travels without repacking and keeps one lot code from the drum label to the customer's batch record. Between 1 kg and 25 kg the material is the same; what changes is how many times it is handled and how many labels stand between the manufacturer's release and the production floor. ## Packs and what each one protects Both packs are chosen for water first. The amino acid is not deliquescent, but the specification holds loss on drying at ≤0.5%, and a pouch that is not sealed or a drum liner that is torn will let a lot drift toward that limit in a humid warehouse. The liner, not the board, is the barrier in the drum. Standard packs for L-citrulline | Pack | Net weight | Closure | Typical use | Foil pouch | 1 kg | Heat-sealed foil laminate | Trial, sample, small batch | Fiber drum | 25 kg | Double polyethylene liner, lever lid | Production batch A drum that has been opened and reclosed is no longer a sealed unit. If a batch runs to the end of a drum, order a full drum rather than a part-used one, and ask for the liner to be closed between uses. The pouch is the better pack for anything that will be opened more than once. ## Lead time and what moves it Lead time is 1–7 days from released stock, counted from the moment the order and the specification are confirmed, not from the enquiry. Milling to 80 mesh and granulation are separate operations on the same lot and move the date. Documents issued with the lot, and any third-party test the customer asks for, sit on the same critical path. If a production start fixes the date, say so at enquiry. A lot can be reserved against a confirmed specification; it cannot be reserved against a question. The other delay that recurs is the specification itself: a buyer who sends a purchase order referencing a catalogue page, rather than the certificate and its methods, often has to reissue it once the documents arrive. ## The six lines a quote needs A quote that omits any of the six is a range rather than an offer, and the gap usually surfaces after the order. The specification line causes the most rework, because two quotations can both say 99% and describe different measurements. What to state on an enquiry for L-citrulline | Line | What to specify | Why it changes the offer | Product and form | L-citrulline, free amino acid | Separates it from a citrulline malate blend | Specification | Assay basis, rotation, limits, method | Defines which certificate applies | Particle size | 40 mesh standard, 80 mesh or granulated | Adds a milling or granulation step | Pack and quantity | Pouch or drum, number of units | Sets the handling and the lot split | Destination and term | Incoterm, port or door | Sets the route and who clears | Documents | COA, SDS, specification, statements | Some documents are issued per shipment ## Samples A sample should be drawn from a released lot and travel with that lot's certificate and a label carrying the lot code. It answers identity, assay, rotation, water, pH, particle size and colour. It cannot answer flow at production speed, fill weight on a particular machine, or how the powder behaves after a week in the customer's warehouse; those need a trial on the line with the commercial pack. Ask for the sample in the same pack type as the commercial material. A sample in a screw-top jar has already met more air than the drum will, and a caking result from that jar says more about the jar than about the lot. ## Terms worth fixing in writing Four terms belong in the first order. The specification and the method behind each limit, referenced to the certificate rather than to a catalogue page. The quantity tolerance and the pack, because a drum is filled by weight and the net figure has a tolerance. The Incoterm and the point at which risk passes. And a change-control clause: no change of mesh, route or manufacturing site without notice and a new certificate. Add a retention clause and a shelf-life statement at shipment, and the set is complete. All of these decide whether the second order arrives as the first one did. The catalog specification these lines refer to is on the L-citrulline product page; the release tests are on the COA page, and the form comparison is on the grade page. Packing, pallets and export documents are covered on the logistics page, and the minimum-order term is defined in the MOQ note. ### 05 Where L-citrulline is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-citrulline/compliance/ Reviewed: 2026-11-19 L-citrulline is sold as a food supplement ingredient in the EU, the US and the UK, and in all three the permission question is settled before the specification is. What the file still has to show is the form, the national rule that applies to amino acids, the contaminant figures, the label wording and the documents behind each statement on the panel. In one linePermission is the simple part: the form, the national rule for amino acids, the contaminant figure and the label wording are what a market review settles. ## Three markets, four questions Four questions decide the file: is the ingredient permitted in a supplement, is the form the one the permission covers, which limits apply to the lot, and what may the label say. A raw-material specification answers none of these on its own, and a certificate of analysis is not a permission. The reading below reflects the rules as of this review; regulation text changes, and a market review should quote the version in force on the day of launch. ## European Union Food supplements are governed by Directive 2002/46/EC. Annex I lists the vitamins and minerals that may be used, and amino acids are not in that list, so permission for L-citrulline in a supplement is national rather than Union-wide. Some member states publish positive lists; others rely on general food law and a documented history of use. The second check is the novel-food catalogue: L-citrulline is listed there as not novel, so no authorisation is needed on that ground, although the catalogue is revised and the entry should be confirmed at the time of review. Contaminants sit in Regulation (EU) 2023/915, labelling in Regulation (EU) 1169/2011 and claims in Regulation (EC) 1924/2006. Each applies to the finished supplement, not to the drum. The EU regulatory note sets out the instruments and the national variations. ## United States An amino acid with a history of use in food before October 1994 can be marketed as a dietary ingredient under DSHEA without pre-market approval, and L-citrulline is in that position. The obligations that remain matter to a buyer: current good manufacturing practice under 21 CFR 111 for the finished supplement, truthful labelling under 21 CFR 101, and the notification burden for a new dietary ingredient, which falls on the marketer of the supplement rather than on the raw-material supplier. California's Proposition 65 sets a lead threshold on daily intake rather than on concentration, which for a multi-gram serving is stricter than the EU concentration limit in practice, so a US label review should ask which state the product ships to. The US regulatory note covers the instrument and the state layer. ## United Kingdom Great Britain retains the food supplements rules in the Food Supplements (England) Regulations 2003 and their devolved equivalents, together with assimilated contaminants and labelling law. The claims regime is retained as the GB register, so a claim has to appear there rather than on the EU register, and the two registers are not identical. Northern Ireland continues to apply EU rules under the Windsor Framework, so artwork for Belfast is a different exercise from artwork for Manchester. As of this review the position rests on retained law rather than on primary legislation. The UK regulatory note lists the instruments. ## The contaminant figures and where they come from Three of the four metal figures in this specification line up with the EU maximum levels for food supplements; the fourth is a customer limit. The distinction matters when a buyer asks whether a result is legal or merely acceptable. Heavy metals and microbiology · limit and legal status | Parameter | Catalog limit | Status | Lead | ≤3 mg/kg | EU maximum for food supplements is 3.0 mg/kg | Cadmium | ≤1 mg/kg | EU maximum for food supplements is 1.0 mg/kg | Mercury | ≤0.1 mg/kg | EU maximum for food supplements is 0.10 mg/kg | Arsenic | ≤2 mg/kg | Customer specification; no EU maximum for this category | Total plate count | ≤1,000 cfu/g | Specification, not a statutory figure | Yeast and mould | ≤100 cfu/g | Specification, not a statutory figure | E. coli, Salmonella | Absent | Specification, not a statutory figure Arsenic is the line to read carefully. The EU has not set a maximum for arsenic in food supplements as a category, so the 2 mg/kg figure is this specification's own gate and a different supplier may offer a different one. A buyer who needs a legal limit rather than a commercial one should ask which instrument the number comes from, and a supplier who cannot answer the question has quoted a habit rather than a rule. ## What the label may say Two claim regimes, one test: the sentence has to be on the register. In the EU that is Regulation 1924/2006 and the Union register; in Great Britain it is the retained register; in the US a supplement claim must be a structure or function statement notified to the FDA, or an authorised health claim, and disease claims are prohibited outright. The wording on a panel should be checked against the register entry and its conditions, not against a competitor's label. This page makes no claim about what L-citrulline does in the body. It describes a material, a specification and a file. Any sentence that goes beyond that belongs to a claims review, and the file should show the register entry that supports it. ## The file behind the lot A market review asks for a small set of documents, and each one answers a question that a certificate alone cannot. The set below is what a distributor or a brand should be able to assemble for the lot they are shipping. - Certificate of analysis for the lot, with methods and results. - Version-controlled specification, including the assay basis and the rotation conditions. - Safety data sheet and storage statement. - Allergen and non-GMO statements. - Origin and manufacturing-site statement. - GMP or site certification statement. - Heavy-metal and microbiological results for the lot. - Retained-sample record and lot-code trace. ## A checklist for the launch review The eight items below catch most of the failures that surface after a label is printed. Each is a document or a decision, not an opinion, and each can be closed before the first shipment. Pre-launch compliance checklist | Item | What closes it | Ingredient name and form | Panel, specification and certificate name the same material | National permission | Written confirmation for each member state of sale | Novel-food status | Catalogue entry checked and filed | Heavy metals | Lot results against the applicable maximum | Microbiology | Lot results against the specification | Claims | Every sentence traced to a register entry or removed | Documents | File complete for the lot, not for the product | Destination | Label language and state or national layer confirmed The specification is on the L-citrulline product page, the tests behind the certificate are on the COA page, and the form that a permission covers is compared on the grade page. The release workflow is on the quality page, and the metal limits are defined in the heavy metals note. ### 06 How we prove an L-citrulline lot is the L form URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-citrulline/identity/ Reviewed: 2026-11-19 Four independent tests carry the claim that a lot is L-citrulline: identification by IR and the ninhydrin reaction, assay by titration, specific rotation, and a chromatographic purity profile. The first two appear on every certificate; the rotation is the one that separates the L form from a mixture, and the chromatogram names what else is in the drum. In one lineThe rotation proves the configuration and the chromatogram proves the purity; the titration only says how much material is in the drum. ## Four layers, and what each one proves Identity is not one test. Each layer answers a different question, and a certificate that shows only one of them leaves the others open. What each identity test can and cannot show | Test | What it proves | What it cannot prove | IR and ninhydrin | The functional groups of an amino acid | Which enantiomer, or how much | Titration | Quantity of titratable material | That the material is citrulline | Specific rotation | Configuration and optical purity | Chemical purity, or which impurity is present | HPLC related substances | Which other compounds are present | The D form, on an achiral column | pH at 5% and loss on drying | Residual acid or base, and water | Anything about identity The last row is not an identity test, and it earns its place anyway. The pH of a 5% solution catches residual acid or base from the ion-exchange and neutralisation steps, and water catches a lot that was dried less than its certificate suggests. Both are process evidence, and process evidence is what tells a buyer whether the material was made the way the certificate describes. ## Rotation, concentration and the ratio that matters Specific rotation is a converted reading: the observed rotation divided by the concentration in grams per millilitre and the path length in decimetres. A 1% solution in a 10 cm cell that reads +0.225° gives +22.5°. The conversion is why the certificate has to state the conditions: the same powder in water and in 6 M hydrochloric acid can give different figures, and a reading taken at 25 °C is not interchangeable with one taken at 20 °C. The window is also a tolerance on optical purity. If a pure L lot reads +22.5°, the middle of the 21.5–23.5 window, then a blend carrying 5% racemic material reads about +21.4° and falls outside; the floor allows 4.4% at that reading. At the top of the window, +23.5°, the floor allows 8.5%. This is arithmetic on the specification, not a batch result, and it explains why a rotation of +21.6° deserves a chiral check before the lot is released rather than a shrug. ## What X-ray diffraction adds, and what it does not X-ray powder diffraction answers a different question: whether the powder is crystalline, and which crystal form it is. It is useful when a lot might be an amorphous blend, a heavily diluted powder or a different salt, because the pattern of the free amino acid is not the pattern of a malate. It is not a chirality test: under conventional powder diffraction the L and D forms of the same compound give the same pattern, and a racemate differs only when it crystallises as a racemic compound. The technique is described in the XRD method note. So XRD is a crystallinity and salt-form screen, not a replacement for the polarimeter. If a certificate offers a diffraction pattern as its identity evidence, the fair question is what the pattern is meant to rule out. ## The substitutions worth testing for Four substitutions account for most of the risk on this material, and each leaves a different trace. Substitutions, the first signal and the confirmation | Substitution | First signal | Confirmation | Citrulline malate sold as citrulline | pH of the 5% solution below 5.0 | Malic acid by HPLC; mass balance | Arginine or ornithine carry-over | Rotation outside the window | Related-substance HPLC | Dilution with glycine or a sugar | Assay and rotation both low | IR, loss on drying, residue on ignition | D-enantiomer or racemate | Rotation near the floor | Chiral HPLC or a chiral reagent The malate substitution is the one a buyer meets most often, because the two materials sit in the same catalogue under similar names. A malate lot can carry a respectable titration figure while holding well under 100% citrulline, and its solution is acidic enough to fail the pH limit outright. The pH test is the quickest screen in the specification for exactly this reason. Water belongs on the same list even though it is not a substitution. A wet lot can pass the assay on the dried basis and still fail the loss-on-drying limit, and the dried basis is what hides the difference. A nitrogen or protein figure is not a substitute for the assay either: this specification is a titration, and a nitrogen number is a different measurement of a different thing. ## How the specification should read The name comes first: L-citrulline, CAS 372-75-8, not “citrulline” and not “citrulline malate”. Then the assay with its basis and method, the identification pair, the rotation with its conditions, loss on drying, residue on ignition, pH at 5%, the mesh, the metal panel and microbiology. Each line should be capable of failing, which means each line needs a limit and a method rather than an adjective. A specification that reads “assay ≥98%” and stops is a quantity claim with no identity line. It can be met by a malate blend, by a diluted powder or by a racemate, and the buyer would have no basis for complaint because the document never asked the question. The catalog sheet on the L-citrulline product page is written to avoid that gap, and the release tests are set out on the COA page. ## Five questions to the supplier These five close most of the identity gap without a laboratory of your own. Ask them in writing and keep the answers with the lot file. - What is the specific rotation, in which solvent, at what concentration and at what temperature? - Is the assay a titration or an HPLC result, on which basis, and what are the titrant and the end point? - What does the related-substance chromatogram show, what are the limits for arginine and ornithine, and was the column chiral? - Which route made the lot, and what is the limit and the result for the D-enantiomer? - Do the certificate, the drum label and the retained sample carry the same lot code, and can a sample be drawn for independent testing? A supplier who answers all five has described a material. A supplier who answers only the assay has described a percentage. The form comparison is on the grade page, the release tests are on the COA page, and the sampling and retention rules are on the quality page. The release specification is defined in the specification note. ### 01 What the COA for L-glutamine actually contains URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-glutamine/coa/ Reviewed: 2026-11-19 The certificate for an L-glutamine lot reports appearance, identification by infrared and ninhydrin, the assay by HPLC on the dried basis, specific rotation, loss on drying, residue on ignition, pH, particle size, the heavy-metal panel and microbiology. Each line needs three things: what was measured, which method produced the figure, and which release limit the lot was judged against. The limits shown here belong to the catalog; the lot certificate is what ties a measured result to the drum in front of you. An assay figure on its own does not show that the material is the L form. In one lineThe assay reports how much glutamine is present; the rotation reports the L form, and the water and pH report the state it is in. ## What a certificate has to show A certificate is only useful if each row can be audited without a phone call. The tables below separate the release tests from the contaminant and microbiological panel. A figure needs its method, and a limit needs its basis; without both, the row cannot be checked. Identity, assay and physical tests · L-glutamine | Parameter | Method | Release limit | Appearance | Visual | White crystalline powder or flakes | Identification | Infrared spectrum and ninhydrin reaction | Conforms | Assay (glutamine) | HPLC, dried basis | 98.5–101.5% | Specific rotation | Polarimetry, dried basis | +6.3° to +7.3° | Loss on drying | Gravimetric | ≤0.5% | Residue on ignition | Gravimetric | ≤0.3% | pH (5% solution) | Potentiometry | 5.0–6.5 | Particle size | Sieve analysis | ≥95% through 40 mesh Contaminant and microbiological limits · L-glutamine | Parameter | Method | Release limit | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent ## The assay and the dry-mass correction The assay is a chromatographic result, not a nitrogen count. Glutamine has no strong chromophore in the usual ultraviolet range, so an HPLC method either detects at a low wavelength or derivatises the amino group before separation. Both approaches can be valid, but the certificate should name the column, the mobile phase, the standard and the detection mode. A Kjeldahl nitrogen result would count other nitrogenous material and cannot substitute for the chromatographic result. The assay is reported on the dried basis, which means the water has been removed from the denominator. Loss on drying is measured in a separate test, and the correction is arithmetic: assay on dried basis equals assay as-is divided by one minus the loss on drying expressed as a fraction. A lot that reads 99.0% as-is with 0.4% water corresponds to 99.4% on the dried basis. Both can be correct; the basis belongs next to the number. The 98.5–101.5% window includes the analytical uncertainty of the method. It is not a licence to accept any white powder: an assay inside the window is compatible with the wrong enantiomer, a partly degraded lot or a blend with another amino acid. The rest of the certificate exists to narrow those possibilities. ## Gate and measurement are different columns The release limit is the acceptance boundary chosen for the specification; the batch result is what the laboratory measured on that lot. A certificate that prints the specification range in the result column has not reported a result. One that prints “conforms” reports a conclusion the reader cannot check. Reading one certificate line | Field | What it should contain | Common failure | Parameter | The substance and the form, for example L-glutamine | A generic “amino acid” label | Method | The technique and the detection principle | “HPLC” with no column or standard | Release limit | The range or maximum used at release | A limit copied from a different grade | Result | The measured figure for this lot | The range repeated as the result | Basis | As-is, dried or anhydrous | Basis stated only in a footnote | Conclusion | Pass or fail against the named limit | “Complies” with no limit named This page does not reproduce a batch result, because the figures move from lot to lot. The lot certificate carries them, and its lot code should match the pouch or drum and the retained sample. ## What drifts from lot to lot Assay and loss on drying move with crystallisation, drying and packing. A hot dryer can lower the water figure while creating colour or a harder crystal; a pack that takes up water after filling raises loss on drying while the dried-basis assay still passes. pH moves with residual acid or ammonia, and with hydrolysis in a wet pack. Particle size moves with milling and sieving, so the mesh belongs in the specification. Specific rotation should stay near the middle of the +6.3° to +7.3° window if the material is the L form. A drift toward zero is a warning: it can mean racemisation, a different substance or a measurement made under different conditions. The rotation is a small number, so the solvent, concentration, temperature and cell length have to be controlled. A trend across three lots says more than one result near an edge. Assay drifting low with loss on drying climbing points at water uptake in storage; pH drifting away from the window with colour darkening points at heat or hydrolysis; a sudden change in particle size points at a different mill setting or a different supplier. ## When to bring in a referee An independent laboratory is worth commissioning for a new source, a first shipment into a regulated market, a disputed result, or a label that depends on a form claim. The useful panel is targeted rather than a full repeat: chiral HPLC for D-glutamine, an independent HPLC assay against a certified standard, Karl Fischer for water, ICP-MS for the metal panel, and LC-MS for glutamic acid or the dipeptide if substitution is suspected. Ask the laboratory to report its limit of quantification for each screen. “Not detected” without a limit describes the method's sensitivity, not the sample. Ask for the chromatogram and rotation conditions, and keep the sample under chain of custody: test the retained material, from the same lot code. ## Six lines for a supplier comparison Six lines make two quotations comparable. First, the form and the mesh, including whether the powder is the standard 40 mesh, milled to 80 mesh or granulated. Second, the assay method and its basis. Third, the specific rotation and the conditions under which it was measured. Fourth, the water method and the pH. Fifth, the contaminant and microbiological panel, with methods and limits. Sixth, the pack and the lot traceability from certificate to drum to retained sample. Two quotations that agree on the assay but differ on the other five are not describing the same material. The catalog specification sits on the L-glutamine product page; the forms are compared on the grade page; the identity tests are set out on the identity page; and the release workflow is on the quality page. The chromatographic method is described in the HPLC note, the water test in the loss-on-drying entry, and assay is defined in the glossary. ### 02 L-glutamine or L-alanyl-L-glutamine: choosing a grade URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-glutamine/grades/ Reviewed: 2026-11-19 L-glutamine is the free amino acid; L-alanyl-L-glutamine is a dipeptide of alanine and glutamine. They are different label ingredients with different molecular weights, different solubility and very different behaviour in water. The free form suits dry capsules, tablets and dry blends where the label names L-glutamine, while the dipeptide suits aqueous or heat-processed formats where the free amino acid would cyclise. A change of form changes the label, the mass per serving and the stability file, not only the assay figure. In one lineThe free amino acid and the dipeptide are not interchangeable: one is a label name, the other is a different molecule with its own mass, solubility and regulatory file. ## The label decides before the assay Both carry glutamine, but they are not two grades of one substance. L-glutamine has the formula C5H10N2O3 and the CAS number 56-85-9. L-alanyl-L-glutamine has the formula C8H15N3O4 and the CAS number 39537-23-0. A product whose ingredient list says L-glutamine and whose powder is the dipeptide has a labelling defect before it has a quality defect. Within the free form, “grade” also refers to the physical state: the catalog powder is crystalline at ≥95% through 40 mesh, with milling to 80 mesh and granulation available on request. Those changes affect flow and fill, not identity; mesh is a handling choice, while free form versus dipeptide changes the ingredient. ## Two molecules compared Composition and mass · L-glutamine and L-alanyl-L-glutamine | Property | L-glutamine | L-alanyl-L-glutamine | CAS number | 56-85-9 | 39537-23-0 | Formula | C5H10N2O3 | C8H15N3O4 | Molecular weight | 146.15 g/mol | 217.22 g/mol | Glutamine per gram | 1.00 g on a dry basis | 0.67 g, calculated | Label name | L-glutamine | L-alanyl-L-glutamine | Water behaviour | Hygroscopic; cyclises in solution | More soluble; resists cyclisation The 0.67 figure is arithmetic, not a certificate result: 146.15 divided by 217.22 is 0.673. A dipeptide lot still needs its own assay and identity tests, and a glutamine assay run on the dipeptide is not the same measurement as an assay of the dipeptide. The conversion does not replace the certificate. ## Solubility, stability and the pH question Free glutamine is freely soluble in water, and the 5% solution is slightly acidic at pH 5.0–6.5. In solution the free amino acid can cyclise to pyroglutamic acid with the release of ammonia, and the rate rises with heat and with pH away from the stable range. A dry powder is more stable, but it is hygroscopic: water taken up in an opened pack starts the same reaction slowly and causes caking. The glutamine residue's alpha-amino group is tied up in the peptide bond, blocking the cyclisation route. An aqueous solution therefore retains the glutamine residue longer, and the material is more soluble at the same temperature. Those properties are why the dipeptide appears in liquid formats and hot aqueous steps, and why its stability cannot be read from the free amino acid's data. Particle size belongs to the free form. A 40 mesh crystal flows differently from an 80 mesh powder, and a granulate flows differently again. The dipeptide has its own particle-size distribution, and the mesh of one material says nothing about the other. ## What the form does to the capsule or stick Dry capsules, tablets and dry blends are the natural home of free L-glutamine. A sealed pack controls the water, so a capsule or stick pack can carry the label amount without putting the amino acid into solution. The filling line still has to control humidity, and a low-dose blend may need the 80 mesh grade. Liquids, ready-to-drink formats and processes with a hot aqueous step point toward the dipeptide. The higher solubility allows a more concentrated solution, and the blocked alpha-amino group reduces the cyclisation that limits the free form. The trade-off is mass: a label that declares 5 g of glutamine needs about 7.4 g of dipeptide, and that difference can change the serving size, the stick weight or the number of capsules. Convert before the fill weight is fixed. One gram of glutamine is delivered by about 1.49 g of dipeptide, and one gram of dipeptide delivers about 0.67 g of glutamine. A formula that was built around 1,000 mg of free glutamine becomes about 1,490 mg of dipeptide for the same glutamine figure. The capsule shell, excipient load and taste need checking at that weight. ## What the specification has to name The free form's specification is the one on the product page: assay 98.5–101.5% on the dried basis by HPLC, specific rotation +6.3° to +7.3°, loss on drying ≤0.5%, residue on ignition ≤0.3%, pH 5.0–6.5 at 5% and ≥95% through 40 mesh. Those lines describe L-glutamine and do not transfer to the dipeptide. A dipeptide specification names L-alanyl-L-glutamine, its own CAS number and its own assay method, and it should state the glutamine content that the label calculation will use. The identity tests, the rotation and the impurity profile are the dipeptide's, not the free amino acid's. If the buyer intends to declare “glutamine” on the label while using the dipeptide, the label needs its own review, because the ingredient is not the same substance. An order for “L-glutamine 99%” does not authorise delivery of the dipeptide, and an order for the dipeptide should not be released against a free-glutamine certificate. Name the form, the CAS number and the label name on the order, and ask the supplier to confirm all three on the certificate. ## When a switch is the wrong move Do not switch forms to solve a fill or stability problem without re-checking the label, the serving size and the regulatory file. If the label names L-glutamine, the dipeptide is a different ingredient and the label has to change. If the market file covers only the free amino acid, the dipeptide's status there is a separate question that the supplier's free-form documentation does not answer. If the analytical method was validated for free glutamine, it may not separate or quantify the dipeptide. The free form also remains the simpler choice for a dry capsule where mass is tight, because it carries the full glutamine figure per gram. The dipeptide earns its place where water or heat would otherwise degrade the free amino acid. That is a formulation decision with a stability study behind it, not a like-for-like substitution at the weigh-out. The two forms are compared in more detail on the glutamine versus dipeptide page. The water and heat question is followed through on the stability page, the label and market rules on the compliance page, and the identity tests on the identity page. The product page carries the free-form specification, and the release tests are set out on the COA page. ### 02.1 L-glutamine vs L-alanyl-L-glutamine: stability, dose and the label URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-glutamine/grades/glutamine-vs-alanyl-glutamine/ Reviewed: 2026-11-19 L-glutamine and L-alanyl-L-glutamine are two different molecules, not two purities of one ingredient. The second is a dipeptide: one alanine unit joined to one glutamine unit through a peptide bond. That bond changes the mass per gram of glutamine, the behaviour in water and the name that belongs on the label. A formulator who switches from one to the other has changed the ingredient, the serving weight and the stability file at the same time. In one lineThe dipeptide is not a more soluble version of the same label ingredient; it is a different molecule, and the label, the dose and the stability file all move with it. ## Two molecules, one shared residue L-glutamine is the free amino acid, C5H10N2O3, CAS 56-85-9, with a molecular weight of 146.15 g/mol. L-alanyl-L-glutamine is C8H15N3O4, CAS 39537-23-0, with a molecular weight of 217.22 g/mol. The difference is not a salt or a hydrate of glutamine; it is a peptide of two amino acids, and the glutamine residue is only part of the molecule. A product that declares L-glutamine is declaring the free amino acid. A product that uses the dipeptide is using a different ingredient with a different name, and the two cannot be swapped without changing the ingredient list. The dipeptide is sometimes described as a “stable glutamine”, a handling label rather than an identity; it does not make the two names interchangeable. ## Converting the label figure The glutamine fraction of the dipeptide is fixed by molecular weight: 146.15 divided by 217.22 is 0.673, so one gram of pure dipeptide carries about 0.67 g of glutamine. The reverse factor is 1.49, so one gram of glutamine is delivered by about 1.49 g of dipeptide. These are stoichiometric figures; the lot's assay will move the practical number by a percentage point or two. Glutamine delivered by L-alanyl-L-glutamine · calculated from molecular weight | Dipeptide weighed | Glutamine delivered | Equivalent free glutamine | 1.00 g | 0.67 g | 0.67 g | 5.00 g | 3.36 g | 3.36 g | 7.43 g | 5.00 g | 5.00 g | 10.00 g | 6.73 g | 6.73 g Read the table with the certificate in hand. A dipeptide lot at 98% assay delivers slightly less than the stoichiometric figure, and a free glutamine lot at 99% has its own correction. The label calculation should use the measured assay and the declared ingredient, not the midpoint of a catalog range. ## Stability and solubility Free glutamine is hygroscopic as a solid and unstable in aqueous solution: the molecule can cyclise to pyroglutamic acid and release ammonia, and heat and pH outside the stable range accelerate the reaction. The dry powder is workable in a sealed pack; a liquid gives the reaction a medium, which is the weakness the dipeptide addresses. In L-alanyl-L-glutamine the alpha-amino group of the glutamine residue is part of the peptide bond, so the cyclisation route is blocked. The dipeptide is also more soluble in water at the same temperature, which allows a more concentrated solution and makes it the practical choice for a liquid or a process with a hot aqueous step. The peptide bond is not indestructible, however: prolonged heat or extreme pH can hydrolyse it back to the two amino acids, so the dipeptide still needs its own stability data for the finished pack. Neither material is a drop-in substitute for the other in a stability study. A short liquid shelf life is evidence about free glutamine, not the dipeptide, and a clean dipeptide result says nothing about the free form in the same base. ## What “dose” means on the label The dose on a supplement label is a quantity of the declared ingredient, not a quantity of glutamine unless the label says so. A capsule that declares 500 mg of L-glutamine contains 500 mg of the free amino acid. A capsule that declares 500 mg of L-alanyl-L-glutamine contains about 336 mg of glutamine, because the rest of the mass is the alanine residue. Both labels can be correct; they are declaring different substances. If the formulation target is 500 mg of glutamine, the dipeptide weight is about 743 mg, and if the target is 5 g, the dipeptide weight is about 7.43 g. That difference changes the capsule size, the stick weight and the number of units per serving. The conversion belongs in the formula sheet before the fill weight is fixed, not after the label is printed. No intake is recommended here; the point is arithmetic: the label number names its basis, and the powder mass follows. ## What the label and the file must show In the European Union the ingredient list must name the substance as sold, and L-glutamine and L-alanyl-L-glutamine are separate names. The quantity per portion has to be stated, and neither ingredient has a Nutrient Reference Value, so a percentage of an NRV cannot be attached to it. In the United States the Supplement Facts panel declares the amount per serving of the named ingredient, and the ingredient list names the source. In the United Kingdom the same labelling logic applies under the retained framework, with the GB register governing claims. The two forms also have separate regulatory status. In the EU the dipeptide is listed as an authorised novel food under Implementing Regulation (EU) 2017/2470, with its own permitted categories and conditions as of this review; the authorisation is specific to the dipeptide, and the destination market still has to be checked. That check belongs in the compliance file, not in a supplier's sales sheet. Claims are a separate layer again. A compositional statement such as “L-glutamine 500 mg per capsule” describes the product; a health claim needs an authorisation or a substantiation route in the market concerned. This site makes no health claim for either form. ## Matching the form to the format Choose free L-glutamine for a dry capsule, tablet or dry blend when the label names L-glutamine and the mass per serving is tight. It carries the full glutamine figure per gram, the 40 mesh powder blends well, and the stability question is mainly the pack. Choose the dipeptide when the format is aqueous, ready-to-drink or passes through a hot aqueous step, and when the higher solubility and the blocked cyclisation route are worth the extra mass. Three checks belong before either choice is fixed. The label must name the ingredient that is actually in the pack. The market file must cover that ingredient, not its relative. And the stability study must be run on the finished format with the material that will be used. A switch that passes the assay can still fail the label, the serving size or the shelf life. The forms are compared for dry formats on the grade page, and the free-form specification sits on the product page. The moisture and heat question is followed through on the stability page, the market rules on the compliance page, and the identity tests on the identity page. The release lines are on the COA page. ### 03 L-glutamine is hygroscopic and heat-sensitive; the pack decides the shelf life URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-glutamine/stability/ Reviewed: 2026-11-19 Dry L-glutamine is stable when it is kept dry, but the molecule is hygroscopic and heat-sensitive. Water taken up from the air raises the loss on drying, causes caking and gives the amino acid a medium in which it can cyclise to pyroglutamic acid and release ammonia. Heat accelerates both water loss and the reaction, and a pack that is opened and folded closed is no longer a barrier. The pack and the assigned shelf life are part of the specification. In one lineThe molecule is not the shelf life: a sealed foil pouch keeps the water out, and an opened pack at high temperature is what turns a compliant lot into a failing one. ## The dry powder and the water it takes up The catalog material is a white crystalline powder or flakes with a loss on drying of ≤0.5% at release. That figure is a release condition, not a permanent property. The powder is hygroscopic, so it will move toward the humidity of its surroundings whenever the barrier is open. In a sealed pack the change is slow; in an opened drum it can show within days as caking and poor flow. Water raises the loss on drying and creates a surface film in which glutamine can react. The dry crystal is far less reactive than a solution, but the reaction does not stop at zero water. A lot at 0.2% water can reach the 0.5% limit in a humid warehouse without visible change, and an opened lot can pass the assay while failing the water line. Temperature works with water: a warm pack drives moisture to cooler parts of the container, where it condenses into a local wet spot; warm days and cool nights repeat the cycle. Storage at 25 °C or below, away from direct heat and light, with the pack sealed, is the baseline. A desiccant can back up the liner but does not replace a sealed pack. ## What happens in water L-glutamine is freely soluble in water, and a 5% solution reads pH 5.0–6.5. In solution the free amino acid can cyclise to L-pyroglutamic acid (5-oxoproline) with the loss of ammonia. The reaction is slow in a cool, mildly acidic solution and faster as the temperature rises or the pH moves away from the stable range. A dry drink mix is a different product from a hot-filled ready-to-drink liquid. That is why free glutamine is a poor candidate for a long-shelf-life liquid. The signals are a falling assay, a rising pyroglutamic acid peak and a pH shift as ammonia is released; taste and colour can follow. For a liquid, the dipeptide L-alanyl-L-glutamine is the usual answer: the glutamine residue's alpha-amino group is tied up in the peptide bond, blocking cyclisation. It still needs its own stability data, because the peptide bond can hydrolyse under prolonged heat or extreme pH. ## The factors that move the result What shortens the shelf life of L-glutamine, and what controls it | Factor | Effect | Control | Moisture | Raises loss on drying, causes caking, enables cyclisation | Sealed foil or lined drum; desiccant where justified | Heat | Accelerates water loss and the cyclisation reaction | Store below 25 °C; keep away from dryers and sunny walls | pH in solution | Moves the cyclisation rate away from its minimum | Keep the finished formula in the validated pH window | Time in solution | More pyroglutamic acid and ammonia with holding | Short hold times; chill; use the dipeptide for long shelf life | Reducing sugars | Browning with heat and water | Segregate in dry blends; control water activity | Opened pack | Repeated humidity exposure at the surface | Reseal, use within a defined period, retain the lot label ## Designing the stability study Use the ICH Q1A(R2) design, adapted for a food ingredient: long-term storage at 25 °C and 60% relative humidity, intermediate storage at 30 °C and 65%, and accelerated storage at 40 °C and 75%. Test at 0, 3, 6, 9, 12 and 24 months, plus the accelerated points the protocol requires. The panel should include assay by HPLC, loss on drying, pH of a fresh 5% solution, specific rotation, appearance and the pyroglutamic acid peak. Microbiology belongs on the same schedule for an opened-pack study. Test the pack in its storage orientation and test an opened pack separately if the label tells the user to reseal it. A glass jar in a laboratory does not describe a 25 kg drum in a warehouse. Record the pack, the lot and the starting water content with the results. A stability table without the starting moisture cannot separate a packaging failure from a lot already at the limit on day zero. ## The formula decides how much the pack has to do Format, water exposure and the control that matters | Format | Water exposure | Control | Capsule or tablet | Low in a sealed bottle; high in an opened one | Low-humidity filling; sealed bottle with a desiccant if needed | Dry stick pack | Low; the foil is the barrier | Foil laminate, sealed seams, water activity of the blend | Dry drink mix | Low until mixed; acidic ingredients raise the risk | Dry blend, avoid reducing sugars, control the pH on mixing | Liquid or ready-to-drink | Continuous | Use the dipeptide or accept a short shelf life; validate the hold time | Granulated grade | Lower surface area, slower water uptake | Water-free granulation; same barrier as the powder Particle size changes the rate, not the direction. An 80 mesh powder has more surface per gram and picks up water faster than the 40 mesh crystal; a granulate has less exposed surface and flows better in a humid room. Neither substitutes for the barrier. ## The shelf life and the pack The standard packs are a 1 kg foil pouch and a 25 kg fiber drum with an inner liner. The foil pouch is the barrier for a small trial or a retail-size batch; the drum's liner, not the fiber wall, is what keeps the water out of a production lot. A 24-month unopened shelf life is common for foil-packed crystalline amino acids, but it is an assignment backed by stability data for the pack, not a property of the molecule. The assigned date on the label and the stability summary are the evidence. Once opened, the clock changes: the powder meets room air, the headspace is humid and folding the top does not recreate the seal. Ask for the remaining shelf life on arrival, the storage conditions the assignment assumes, and the period allowed for an opened pack. A release certificate answers none of those. The release tests are set out on the COA page, the forms are compared on the grade page, and the liquid-format trade-off is followed through on the dipeptide page. The packs and the minimum order are on the MOQ page, the market rules are on the compliance page, and the product page carries the catalog specification. The water test is described in the loss-on-drying entry, and quality page sets out the release workflow. ### 04 L-Glutamine: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-glutamine/moq/ Reviewed: 2026-11-19 An L-glutamine order starts at 1 kg, packed in a sealed foil pouch, and the standard production pack is a 25 kg fiber drum with an inner liner. The catalog window is 1–7 days, counted from confirmation of both the specification and the order. A quotation needs six lines: form and mesh, specification, quantity and pack, destination and delivery term, documents, and any sample or outside test. In one lineThe minimum is one kilogram because that is the smallest unit that still carries a lot identity; everything else is pack, mesh and destination. ## The 1 kg floor and what it buys One kilogram is enough for a bench trial, a second trial after the formula changes, and a retained sample that outlasts the project. It is also the smallest pack that can carry a lot number, a certificate and a sealed seam without being repacked by hand. Below that, the material becomes a hand sample rather than a released lot, and a hand sample cannot justify a label decision or a supplier comparison. The arithmetic is easy to check. A 1 kg pouch fills about 2,000 capsules at a 500 mg fill of L-glutamine, or about 1,000 at 1,000 mg, before any loss to the machine. A pilot batch that needs 5 kg is five pouches; a 25 kg batch is one drum. The pack changes the handling: pouches are opened one at a time, while a drum is opened once and then resealed. Because the minimum is set per form and per pack, a mixed order is quoted one line at a time. A buyer who needs 500 g should ask for a sample, not a split pouch: a split pouch loses the factory seam and lot label, and the saving does not justify a release that cannot be documented. ## The packs and what each one protects Standard packs · L-glutamine | Pack | Net weight | Construction | Typical use | Watch | Foil pouch | 1 kg | Foil laminate with sealed seams | Bench trial, pilot batch, retained sample | The seal is the barrier; a folded top is not a seal | Fiber drum | 25 kg | Fiber drum with an inner liner | Production batch | The liner, not the fiber wall, keeps the water out Because the powder is hygroscopic, the pack belongs in the specification. A pouch that has been opened and folded closed is no longer sealed, and a drum opened for a partial weigh-out is no longer a controlled environment unless the liner is closed again. The pack label should carry the product name, form, lot number, net weight and pack date, and the lot number should match the certificate. A desiccant can be specified where the destination climate or the storage time calls for one, but it backs up the liner rather than replacing it. If a desiccant is required, say so on the order; it is not added by assumption. ## Lead time The 1–7 day window runs from two confirmations: the specification and the order. A quotation is not a confirmation, and an order placed against a different specification starts a new clock. If the material is held in the standard pack, the window is short. For an 80 mesh or granulated grade, the clock starts when that step is scheduled, not when the enquiry lands. Documents run on a parallel clock. A shipment into a market that wants a certificate of origin, a safety data sheet in a local format or a third-party certificate will not move on the commercial documents alone. Agree the document list before the order is confirmed, and allow for the destination's public holidays and the forwarder's cut-off. A short production window does not compensate for a document that arrives after the vessel has sailed. ## Six lines a quotation has to carry Six lines make a quotation complete and make two quotations comparable. A quotation that names only “L-glutamine 99%” and a quantity is not comparable with one that names a form, a basis and a pack, because the two may describe different materials. - The form and the mesh: L-glutamine, not the dipeptide; 40 mesh standard, 80 mesh milled or granulated on request. - The specification and its version: assay basis and method, specific rotation, loss on drying, pH, particle size, heavy metals and microbiology. - The quantity and the pack: the number of 1 kg pouches, 25 kg drums or both, and whether a desiccant or a particular liner is required. - The destination and the delivery term, so that freight, documents and risk are quoted on the same basis. - The documents: certificate of analysis, specification, safety data sheet, origin and allergen statements, and any market-specific declaration. - Any sample or additional test: a sample drawn from the offered lot, a third-party rotation, a chiral check or a micro test. ## Samples Draw the sample from the lot that will actually be offered, not from a separate sample shelf. The sample bag and the certificate should carry the same lot number, and the sample should have been taken at packing rather than scooped from an opened drum. The quantity should cover the trial plus a retained portion, because the buyer's laboratory will need both and a second request takes another week. The sample is also the chance to see what no certificate shows: flow, dissolution speed, caking after a week on the bench, and colour against the previous lot. Those observations are a small effort compared with a rejected drum. Keep the sample sealed between checks and record the room humidity; a fair comparison needs the same conditions for both suppliers. ## Where this page stops The quotation carries the commercial terms; this page covers the minimum, the packs and the lead time. Three limits belong in the purchase order. The specification is what the lot is released against, so a new mesh, water limit or form means a new specification and a new quotation. The certificate travels with the lot; its lot number, the pack and the invoice should agree. And a form claim is only a claim if it is documented: if the label says L-glutamine, the order should require L-glutamine, not the dipeptide that carries a similar glutamine figure. The remaining shelf life on arrival belongs in the terms as well. A lot that is correct at release can arrive with most of its assigned life gone, and the buyer carries that loss. Agree the minimum remaining life before the order is placed, and ask for the storage conditions the assignment assumes. The pack is described on the stability page, the release tests on the COA page, and the forms on the grade page. The market requirements are on the compliance page, the product page carries the catalog specification, and MOQ and lead time are defined in the glossary. ### 05 Where L-glutamine is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-glutamine/compliance/ Reviewed: 2026-11-19 L-glutamine is used as a food supplement ingredient in the European Union, the United States and the United Kingdom, but permission is only the first question. The Directive leaves amino acids to member states, the US regulates it as a dietary ingredient under DSHEA and cGMP, and the UK applies the retained framework in Great Britain while Northern Ireland follows the EU regime. The file has to show the form, the level rule, the label and the evidence. In one lineBeing allowed to sell L-glutamine is not the same as being allowed to sell this label: the form, the level rule and the wording are separate decisions. ## Three markets, three rulebooks One certificate can satisfy a US buyer and leave an EU reviewer with questions. The table is a map, not a legal opinion. Every statement here is as of this review; check the current text before a label is printed. Which instrument controls what · L-glutamine | Market | Main instruments | What they settle | European Union | Directive 2002/46/EC; Regulations 1169/2011, 1924/2006 and 2023/915 | Supplement status, labelling, claims and contaminants | United States | FD&C Act as amended by DSHEA; 21 CFR 111 and 101.36 | Dietary ingredient status, cGMP and Supplement Facts | United Kingdom | Food Supplements Regulations 2003 and devolved equivalents; retained labelling and claims law | Permission and labelling in Great Britain; Northern Ireland follows the EU regime ## The European Union Directive 2002/46/EC harmonises vitamins and minerals, and L-glutamine is neither. It sits among the substances left to national rules, so a member state may keep a positive list, set a maximum, require a notification or restrict a form. There is no single EU answer; check each destination. Labelling follows Regulation 1169/2011 and the Directive. The label names it as a food supplement, lists ingredients, states the L-glutamine per portion, and gives the date of minimum durability, batch, storage and operator, with the warning not to exceed the portion. L-glutamine has no Nutrient Reference Value in Annex XIII, so no percentage of an NRV can be shown. The form matters: L-glutamine, L-alanyl-L-glutamine and glutamic acid are different ingredients, and a permission or history attached to one does not automatically cover another. If the label names L-glutamine, the file should describe L-glutamine. ## The United States L-glutamine has a documented history of use before 15 October 1994 and is regarded as an old dietary ingredient as of this review. Document that basis; a new salt, form or route can raise a separate question. Supplements are made under 21 CFR 111 and labelled with a Supplement Facts panel under 21 CFR 101.36. L-glutamine has no Daily Value, so the panel declares the amount per serving without a percentage. A structure or function statement is permitted with the DSHEA disclaimer in 21 CFR 101.93, and the brand owner holds the substantiation; a disease statement is not permitted. ## The United Kingdom Great Britain applies the Food Supplements (England) Regulations 2003 and equivalents in Scotland and Wales, with the Food Safety Act 1990 and retained EU labelling and claims law. The GB claims register governs wording, and the contaminant limits are the retained GB text. Northern Ireland continues to apply EU food law under the Windsor Framework, so an EU-compliant file is the starting point and a GB-only file is not. A label for both has to meet the stricter position. ## Contaminants: catalog line and legal line The catalog's heavy-metal lines are specification terms, and three coincide with the EU maximum for food supplements. A limit at the legal maximum leaves no margin for analytical uncertainty or for a change in the law. Catalog limits and the market position for food supplements | Parameter | Catalog limit | Market note, as of this review | Lead (Pb) | ≤3 mg/kg | EU maximum 3.0 mg/kg; the catalog sits at the line | Cadmium (Cd) | ≤1 mg/kg | EU maximum 1.0 mg/kg; the catalog sits at the line | Mercury (Hg) | ≤0.1 mg/kg | EU maximum 0.10 mg/kg; the catalog sits at the line | Arsenic (As) | ≤2 mg/kg | No harmonised EU maximum for all supplements; the line is contractual | Microbiology | APC, yeast and mould, absence tests | Not a contaminants-regulation limit; process hygiene and the buyer's specification In the US there is no federal maximum for these metals in supplements; FDA action levels and California's Proposition 65 can apply, and Proposition 65 is assessed per daily dose rather than per kilogram. In Great Britain the retained contaminant regulation applies. A lot can meet the catalog and still raise a labelling question in one jurisdiction, so the destination belongs on the quotation. ## Claims: what the label can and cannot say In the EU a health claim needs authorisation under Regulation 1924/2006 and a place on the register. As of this review the register carries no authorised claim for L-glutamine, so a label that carries one needs the citation; the GB register applies the same logic. US law allows a structure or function statement with the DSHEA disclaimer, provided the brand owner holds the substantiation; a disease statement falls outside that route. “L-glutamine 500 mg per capsule” is a compositional statement, not a health claim, and the label and specification must agree on the figure. This site makes no health claim for the ingredient; that decision belongs to the brand owner. ## Documents the reviewer will ask for Documents a market review should expect | Document | What it should show | Lot certificate | Methods, bases and results, matching the lot code on the pack | Specification | The versioned release standard, naming form, mesh and basis | Safety data sheet | The hazard and handling information for the material as sold | Allergen and GMO statements | The material and the pack, with the basis for the statement | Origin and site statement | The actual manufacturer, country of origin and manufacturing flow | Contaminant and micro reports | Methods, limits and results for the lot, not only a pass line | Stability summary | The assigned shelf life and the pack it applies to | Food safety certificate | A current scheme certificate for the manufacturing site, if held Halal, kosher and similar certificates are product- and site-specific; request the document, not a logo, and check that it names this site and pack. ## Eight checks before the file closes - The form on the specification, certificate and label agrees. - The national rule is checked, not assumed from the EU position. - Contaminant limits are compared with the legal maximum; the margin is written down. - The label amount states its basis: L-glutamine, not the dipeptide or a salt. - Any claim has a register entry, or substantiation and the disclaimer in the US. - The same lot code appears on the certificate, the pack and the retained sample. - The pack, storage condition and shelf life are consistent with the stability summary. - A new form, source or manufacturing site means a new specification and a fresh review. The three market summaries sit on the EU, US and UK resource pages. The release tests are on the COA page, the identity tests on the identity page, the pack on the stability page, and the product page carries the catalog specification. ### 06 How we prove an L-glutamine lot is the L form URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-glutamine/identity/ Reviewed: 2026-11-19 An L-glutamine lot is proved in layers: the record names the substance, infrared and ninhydrin confirm that the substance is glutamine, the specific rotation assigns the L configuration, and the water, pH and particle size describe the form in the drum. No single test does all four jobs. An assay of 99.5% can belong to the L form, the D form, a partly degraded lot or a blend, so the assay is the last number to read and the first one to question. In one lineAn assay can be right while the configuration, the water and the identity are wrong; the L form is proved by the rotation, the chromatogram and the state of the powder together. ## Four checks, four blind spots Start with what the document says, then move to what the instrument measures, then to the configuration, then to the physical state. Every layer answers one question and leaves a gap that the next one fills. Identity layers for L-glutamine and what each one misses | Layer | Question | Test | Blind spot | Record | What is this lot supposed to be? | Name, CAS 56-85-9, lot code, specification | Says nothing about the drum | Substance | Is it glutamine? | Infrared spectrum, ninhydrin reaction, HPLC retention and assay | Cannot separate the enantiomers | Configuration | Is it the L form? | Specific rotation; chiral HPLC where a limit is needed | Weak on quantity; needs clean optics | Form and state | Is it the free amino acid in the condition ordered? | Water, pH, residue on ignition, particle size | Silent on configuration The assay is the weakest starting point: it can be satisfied by every failure mode in the table. ## Specific rotation: the L-form gate The catalog range is +6.3° to +7.3° on the dried basis. The observed rotation is divided by path length and concentration and compared with the range for the pure enantiomer. Because the rotation is small, solvent, concentration, temperature and cell length matter. A certificate printing +6.8° without those conditions cannot be checked. The range is an identity gate, not an enantiomeric purity grade. A few per cent of the D form can sit inside the window, because the D form's rotation is equal and opposite and the window is wider than the analytical uncertainty of one clean measurement. Two lots can both read inside the range and differ in enantiomeric composition. If the specification needs a D-glutamine limit, it has to be a chiral HPLC limit written into the specification; the rotation alone does not provide it. Rotation catches gross substitutions: a racemate moves toward zero, and an amino acid with a much larger rotation can leave the window. It is weaker against a small addition, so it belongs with the chromatogram. ## What the crystal form does not prove L-glutamine is crystalline, so X-ray diffraction gives a genuine fingerprint of the solid form. It checks a lot against the reference crystal form and catches a different crystalline substance, a different polymorph or a largely amorphous material. The powder and flakes can differ in habit, so the reference pattern and sample preparation belong in the method. XRD cannot assign the configuration. The two enantiomers are isostructural, so a mixture of L and D crystals gives the pattern of the L lattice. A racemic compound can give a different pattern, so XRD may raise a flag but cannot clear one. Infrared has the same blind spot: the functional groups are the same in both enantiomers. Use XRD for the solid-form question and keep it away from the configuration question. A diffraction pattern offered as proof of the L form is evidence of the wrong question. ## pH and the acid form The specification gives pH 5.0–6.5 at 5%. That is not an identity test on its own, but it checks the form. Glutamic acid, the close relative, is more acidic in solution; a sodium glutamate salt sits nearer neutral; residual ammonia from degradation raises the pH. A figure outside the range is a reason to investigate, not a proof of substitution. Measure on a fresh solution: glutamine cyclises to pyroglutamic acid in water, so a reading after a long hold describes a different mixture. The pH belongs beside the water content and the assay. ## Five routes a substitution can take Substitution routes and the test that sees them | Route | Signature | Test | D-glutamine or a racemate | Rotation moves toward zero; assay unchanged | Polarimetry; chiral HPLC | L-glutamic acid | Close structure; different retention and pH | HPLC against a glutamic acid standard; pH | L-alanyl-L-glutamine | Different molecular weight and retention; similar nitrogen | HPLC; LC-MS confirmation | Other amino acids | Ninhydrin reacts alike; assay may be inflated | HPLC fingerprint and standard | Pyroglutamic acid | Degradation product, not a filler | HPLC impurity peak; pH and ammonia Each route is caught by a different line on the certificate, which is why the identity page and the COA page have to be read together. A non-specific nitrogen assay would miss all five because it counts nitrogen rather than the molecule. ## Writing a line that can be enforced A specification that can be enforced names the form, the basis and the configuration in one line: “L-glutamine, 98.5–101.5% on the dried basis by HPLC; specific rotation +6.3° to +7.3° on the dried basis; loss on drying ≤0.5%; residue on ignition ≤0.3%; pH 5.0–6.5 in 5% solution; particle size ≥95% through 40 mesh.” Add the contaminant and microbiological panel, and name the packing. If the buyer needs an enantiomeric limit, add “D-glutamine not more than the agreed limit by chiral HPLC” and state the method's detection limit. The catalog range is not that limit, and a limit that exists only in a conversation does not survive a supplier change. Add the mesh where the material is milled to 80 mesh or granulated. If the label names L-glutamine, write L-glutamine in the specification, because the dipeptide and glutamic acid are different substances with similar names. ## Five answers to ask for - Was the rotation run on this lot, and what solvent, concentration, temperature and path length were used? - Which HPLC method and which standard produced the assay, and is the figure on the dried basis? - What is the D-glutamine result, by which chiral method, and what is that method's limit of quantification? - Are the loss on drying, pH and residue results from this lot, and was the pH measured on a fresh solution? - Where was the lot manufactured, and can the batch record for crystallisation and drying be shared under an agreement? Five clear answers amount to a specified material. An assay-only answer describes a white powder, not a lot. The COA page describes the certificate those answers belong on. The forms are compared on the grade page and on the dipeptide page. The product page carries the catalog specification, the separation is explained in the HPLC note, the crystal-form test in the XRD note, and assay is defined in the glossary. ### 01 What the COA for L-tryptophan actually contains URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-tryptophan/coa/ Reviewed: 2026-11-19 The certificate for an L-tryptophan lot reports appearance, identity by IR and the ninhydrin reaction, assay by HPLC on the dried basis, specific rotation, loss on drying, residue on ignition, pH of a 1% solution, the related-substance profile, particle size, heavy metals and microbiology. Each row should carry the method and the release limit, not only a number. The ranges here are the catalog specification; the batch COA confirms one drum. The two figures that carry the most weight are the drying basis behind the assay and the rotation that separates the L form from the D and DL forms. In one lineThe assay measures how much tryptophan is in the drum; the drying basis, the rotation and the related-substance panel say what that number means. ## The certificate as a test report A certificate is useful when it can be audited line by line: what was measured, with which method, against which limit it was released. A page that lists appearance, assay and “conforms” answers none of the identity questions an amino acid raises. Identity, assay and physical tests · L-tryptophan | Parameter | Method | Release limit | Appearance | Visual | White to off-white crystalline powder | Identification | IR and ninhydrin reaction | Conforms to reference | Assay | HPLC, UV detection, external standard | 98.5–101.5% on the dried basis | Specific rotation | Polarimetry, 589 nm | −29.4° to −32.8° on the dried basis | Loss on drying | Gravimetric | ≤0.5% | Residue on ignition | Gravimetric | ≤0.1% | pH (1% solution) | Potentiometry | 5.5–7.0 | Related substances | Chromatographic, stated on the COA | Individual and total reported; limits agreed in the specification Particle size, contaminants and microbiology | Parameter | Method | Release limit | Particle size | Sieve analysis | ≥95% through 40 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent ## What the assay, the drying basis and the rotation measure The assay is a reversed-phase separation with UV detection against an external standard. The indole ring absorbs near 280 nm, so the detector sees tryptophan and any indole-bearing impurity at the same wavelength — which is why the assay peak needs the related-substance panel beside it. A co-eluting species can sit inside the main peak and leave the percentage inside the window. “Dried basis” means the result is corrected for the water the lot carries. Convert with as-is = dried × (100 − LOD) ÷ 100. A result of 98.5% dried with 0.4% loss on drying converts to 98.1% as sold; 101.5% dried converts to 101.1%. Because the catalog caps loss on drying at 0.5%, the gap between the bases is at most about half a percentage point — small, but enough to move a lot across the lower limit when the two sides disagree. The certificate should state the drying temperature and time. Specific rotation is measured in water at the sodium D line: [α] = observed rotation ÷ (path in dm × concentration in g/mL). At 1 g per 100 mL and a 1 dm cell, a value near −31° gives an observed rotation of only −0.3°, so temperature, incomplete dissolution near the solubility limit and the cell all matter. A rotation without its conditions cannot be repeated. pH of a 1% solution is a process check, not an identity test: the window 5.5–7.0 spans the isoelectric point at 5.9, so a near-neutral reading is expected, and a shift towards acid or alkali points to residual acid or base. ## Release limit versus batch result The release limit is the acceptance boundary; the batch result is what the laboratory measured. Both belong on the page, in separate columns, with the method beside them. A result column filled with the specification range is a copy of the gate, not a result, and the reader should be able to reach “passes specification” from the numbers. Related substances usually arrive as a bare total. Ask for the individual peaks, their sum, the column, the detection wavelength and the limit of quantification. An enantiomer does not appear in that chromatogram: D-tryptophan co-elutes with the L form on a conventional reversed-phase column, so no care with the assay will detect it. The rotation is the check, and a chiral column is the confirmation. Edge decisions need a rule. A rotation of −29.3° against a window starting at −29.4° is outside by a tenth of a degree, inside the repeatability of many polarimeters. Re-test a fresh solution and record the decision against the method's uncertainty rather than rounding the figure until it passes. ## What moves between batches Rotation moves with enantiomer content and with the measurement; loss on drying moves with the drying step and the packing room; related substances move with route and crystallisation; particle size moves with milling. None is a defect by itself, and each reads better as a trend. Colour is the least quantitative line and often the most revealing. A cream or yellow tint on a white-to-off-white powder points to light or oxygen exposure, or to a drying step that ran hot, while the assay still passes. Ask for the batch record before rejecting the lot on appearance. A supplier whose last five lots show rotation drifting towards the lower edge and total related substances climbing is describing a crystallisation, even when every certificate says “conforms”. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a form claim the certificate does not prove, or a disputed result. The panel is targeted: chiral HPLC for the D enantiomer, LC-MS for a peak that does not belong to the standard, ICP-MS for the metals, and a plate count. Ask the laboratory for its limit of detection and limit of quantification. “Not detected” without a limit says something about the method, not about the sample. The same applies to the assay: a report naming column, detector and basis can be compared across laboratories; a bare percentage cannot. For a dispute, give the referee the retained sample, the certificate and the specification, and ask for the tests that separate the forms; the sample tested should be the sample retained, and the lot code should link the sample, the certificate and the drum. ## What to compare between suppliers Put six lines side by side: form and CAS; assay with its basis; rotation with its conditions; the related-substance method with individual and total figures; loss on drying; appearance and the light barrier of the pack. Two quotations that match on assay and diverge on the other five are not describing the same powder. The second layer is traceability: the lot code should be identical on the certificate, the drum and the retained sample, and the certificate should name the manufacturer, not only the distributor. A correct certificate can still belong to a drum other than the one on the loading dock. The catalog specification sits on the L-tryptophan product page. The form decision is on the grade page, and the tests that separate the forms are on the identity page. The release workflow is on the quality page, and the chromatographic method in the HPLC method note. ### 02 L-tryptophan or DL-tryptophan: choosing a grade URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-tryptophan/grades/ Reviewed: 2026-11-19 L-tryptophan and DL-tryptophan are different label ingredients, and the choice between them is settled by the label, the rotation and the dosage form rather than by the assay percentage. Inside the L form, the second decision is physical: 40 mesh is the standard, with milling to 80 mesh or granulation on request. This page puts the two decisions side by side and shows what changes when either is switched. In one lineThe grade is chosen by the label and the rotation, not by the assay: L and DL can both read 99% and be different materials. ## Two decisions hide behind the word “grade” In amino-acid trade, “grade” covers two unrelated choices. The first is which molecule is in the drum: the L enantiomer, the racemic DL mixture, or a different substance such as 5-HTP that shares part of the name. The second is the physical form of that molecule: crystal size, flow, dust and how fast it dissolves. A quotation that names only “tryptophan 99%” has answered neither question. For this product the molecule is fixed as L-tryptophan, CAS 73-22-3. A request for DL is a request for a different material, with its own certificate, its own label name and its own regulatory position, and it is handled as such rather than as a variant of the same line. The assay is a poor guide to the first decision. A racemic lot and an L lot can both sit inside a 98.5–101.5% HPLC window, because the assay counts the molecule and not its handedness. The rotation is the line that separates them, and it belongs in the specification before the first order rather than in a conversation after it. ## L and DL side by side L-tryptophan and DL-tryptophan compared | Attribute | L-tryptophan | DL-tryptophan | Chemical name | (S)-2-amino-3-(1H-indol-3-yl)propanoic acid | Racemic mixture of the two enantiomers | CAS number | 73-22-3 | 54-12-6 | Composition | One enantiomer | Approximately equal parts D and L | Specific rotation | −29.4° to −32.8° on the dried basis | Close to zero | Assay by HPLC | 98.5–101.5% on the dried basis | Same method and a similar range; read the certificate | L content per gram | 1.00 g | About 0.50 g | Label name | L-tryptophan | DL-tryptophan | Usual supply | Supplement and food use | Feed and industrial routes Two rows carry the commercial consequences. The rotation is measured, not calculated, so it can be checked on arrival with a polarimeter and a dissolved sample. The L content is arithmetic: a gram of racemic material delivers about half a gram of the L form, so a formula written for 500 mg of L-tryptophan needs roughly twice the mass if DL is substituted. The comparison is grams of L delivered, not kilograms of powder. ## What 40 mesh, 80 mesh and granulated change The catalog form is a crystalline powder with at least 95% passing a 40 mesh sieve. That is the particle size most capsule fillers and blender feeds are set up for. Milling to 80 mesh is available on request and gives a finer powder: it dissolves faster and distributes more evenly in a small blend, and it also produces more dust, more static and a greater tendency to segregate from a coarser excipient. Granulation is the other direction. A granulated lot flows better, generates less dust and fills a capsule or a stick pack more evenly; the granules also dissolve a little more slowly than the milled powder, which matters in a drink mix. Neither variant is better in general. The dosage form and the filling line decide, and the trial decides between them. Bulk density and flow are not on the catalog specification. If the filler needs a number, ask for the bulk density and the angle of repose on the lot being offered, and run a fill trial before the purchase order rather than after it. Particle size is described in the particle-size glossary note. ## Fitting the form to the dosage form Capsules and tablets take the 40 mesh powder directly. A tablet at a gram dose is a large tablet, and the granulated form gives the press better flow; the compaction trial decides whether a binder or a larger tool is needed. Capsules are more forgiving, but a fine milled powder can bridge in the hopper and slow the fill. Powder sticks and drink mixes are the harder case, because the dose has to dissolve. L-tryptophan is sparingly soluble — roughly 11 g per litre of water at room temperature — so a 1 g stick pack in 100 mL sits close to saturation and may leave a fine suspension rather than a clear drink. A larger volume, a granulated form or a split dose each solve part of that; the formulation trial should be run at the real volume, not in a beaker of warm water. The physical form also changes the packing decision: a fine milled powder holds more air and settles differently in a 1 kg pouch, which affects the net weight check. ## Writing the grade into the specification A grade is only real when it is written down. The specification should name L-tryptophan and CAS 73-22-3, give the assay by HPLC on the dried basis, state the specific rotation with its solvent, concentration and temperature, set the related-substance limits with the method, cap loss on drying at 0.5%, and fix the particle size as at least 95% through 40 mesh — or the milled or granulated variant that was ordered. Two lines are often left out and should not be. The rotation is the only line that proves the L form on a routine basis, and the related-substance limits are what stop a reworked lot from entering as new material. The pack belongs in the same document: a foil pouch or an opaque drum, because the material is light-sensitive and a clear bag undoes the specification in a warehouse window. The certificate for a lot is described on the COA page, and the tests that separate the forms are on the identity page. ## When not to switch Do not switch L to DL to close a cost gap. The label has to name the form that is in the drum, the file has to match the label, and a formula written for the L form needs about twice the mass of the racemic material to deliver the same amount — a saving on the invoice is not a saving in the formula. Do not switch if the artwork, the specification and the customer's approved sample all say L-tryptophan. Changing the molecule means a new specification revision, a new label and a new stability question, and that work is larger than the difference on the invoice that prompted it. Do not accept a DL certificate without a rotation, and do not mill to 80 mesh without a fill or blend trial. Both are small changes on paper and measurable ones on the line. The head-to-head comparison of the two molecules is on the L versus DL page; the market rules that follow the name are on the compliance page, and the catalog specification is on the product page. ### 02.1 L-tryptophan vs DL-tryptophan: rotation, regulation and the label URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-tryptophan/grades/l-vs-dl-tryptophan/ Reviewed: 2026-11-19 L-tryptophan and DL-tryptophan differ by one property that every market can measure: the direction the molecule turns polarised light. The L form turns the plane to the left, the racemic DL mixture turns it close to zero, and both can return the same HPLC assay. The label has to name the form that is in the drum, and a specification without a rotation cannot tell the two apart. In one lineRotation separates the forms and the label has to follow it; the assay cannot, because both forms sit inside the same range. ## One chiral centre, two molecules, one mixture Tryptophan has a single chiral centre at the alpha carbon, so it exists as two enantiomers. The L form is the one found in proteins and the one sold as a supplement ingredient; the D form is its mirror image. DL-tryptophan is not a third molecule but a mixture of the two, usually close to a 1:1 ratio, which is why it is optically inactive: the rotations of the two enantiomers cancel. The three materials carry different identifiers. L-tryptophan is CAS 73-22-3, DL-tryptophan is CAS 54-12-6, and the D form has its own number again. A fourth substance sometimes confused with them is 5-HTP, which is hydroxylated on the indole ring, has a different molecular formula and is a different label ingredient; it is not a grade of tryptophan and cannot be substituted for one. Appearance is no help: all of them are white to off-white crystalline powders, and a photograph of the drum proves nothing about the enantiomer inside. ## The rotation, read as a number Specific rotation is measured on a dissolved sample at the sodium D line and corrected for path length and concentration. For the L form the catalog window is −29.4° to −32.8° on the dried basis. A racemic DL lot reads close to zero, and a lot enriched in the D form reads positive. The sign tells you the direction; the magnitude tells you how far the material is from racemic. Because rotation is linear in enantiomer fraction, the window is also a chiral purity statement. Read against a pure L value of roughly −31.5°, the lower edge at −29.4° implies at least 96% L; a result of −25° implies about 90%, which is a mixture rather than a low-purity L. A rotation just outside the window is therefore a decision about the lot, not a rounding error. The measurement is small. At 1 g per 100 mL in a 1 dm cell, −31° produces an observed rotation of about −0.3°, so temperature, dissolution and cell cleanliness matter. A rotation without solvent, concentration and temperature cannot be checked. ## Why the assay cannot answer the question Both forms are assayed by the same reversed-phase HPLC method with UV detection near 280 nm, against a standard of the same amino acid. The two enantiomers have identical UV spectra and, on a conventional C18 column, identical retention. The assay therefore counts tryptophan molecules and is blind to which hand they carry. A DL lot at 99.0% and an L lot at 99.0% are the same number on the certificate and different materials in the drum. The difference appears in the dose arithmetic. One gram of DL-tryptophan contains about 0.5 g of the L form, so a formula written for 500 mg of L-tryptophan needs roughly twice the mass if the racemic material is used. The label amount is a statement about the ingredient named on it, and that named ingredient is what has to be weighed. A certificate that reports only assay and appearance is therefore not an identity document. The identity lines are the rotation, the IR spectrum and the related-substance panel; the assay is a quantity. ## Regulation follows the name None of the three markets accepts DL as a synonym for L on a label. In the EU, an amino acid in a food supplement falls under general food law rather than the vitamin and mineral list in Annex II to Directive 2002/46/EC, and must be described by the name of the substance used. In the US it is a dietary ingredient under section 201(ff) of the FD&C Act, declared by that name in the Supplement Facts panel. In Great Britain retained food law applies; Northern Ireland follows the EU rules under the Windsor Framework. The forms also have different supply histories. DL-tryptophan has a large feed use, sold against a feed specification and a feed documentation set; a feed-grade drum is not a supplement-grade drum. Before a DL lot is considered for a supplement, the destination market's acceptability for that form has to be confirmed in writing rather than inferred from the L form's status. The market instruments are set out in more detail on the EU regulatory note, the US note and the UK note. ## What the label has to say The ingredient name is the first obligation: “L-tryptophan” on the panel means the L form, “DL-tryptophan” means the mixture. The amount per portion must describe the named ingredient, not a calculated quantity of one enantiomer inside it. In the EU the supplement also carries the mandatory particulars of Directive 2002/46/EC, including the warning not to exceed the stated dose; in the US the declaration sits in the Supplement Facts panel under 21 CFR 101.36. Amino acids have no Daily Value and no Nutrient Reference Value, so no percentage figure belongs beside the amount. That absence is not an omission; there is no reference value to divide by. The claim wording has to match the label name as well. A statement written for L-tryptophan cannot be carried onto a DL product by changing the ingredient list and leaving the claim in place, because the claim then describes a material that is not in the pack. ## Choosing between them Which form fits which brief | Brief | Form | Reason | Capsule or stick pack labelled L-tryptophan | L-tryptophan, 40 mesh or milled | The label and the rotation both have to say L | Reformulation of a product already labelled L | L-tryptophan | Changing the form changes the label and the file | Feed premix, feed specification | DL-tryptophan | Feed use, feed documents, about half the L per gram | Comparison study of the two forms | Both, each with a rotation | Without the rotation the comparison is not defined | Offer without a rotation on the certificate | Neither | The form is unproven, whatever the assay says Two rules close the question. First, count the grams of L delivered: the racemic material carries about half the L form, so a kilogram of DL supplies half the L of a kilogram of L-tryptophan. Second, put the rotation in the purchase specification and check it on the first delivery with a polarimeter; one reading settles what a page of assay data cannot. The grade decisions around particle size and dosage form are on the grade page. The four identity layers are on the identity page, the certificate lines on the COA page, the market rules on the compliance page, and the catalog specification on the product page. ### 03 L-tryptophan is light- and oxygen-sensitive; the pack decides the shelf life URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-tryptophan/stability/ Reviewed: 2026-11-19 L-tryptophan is stable as a dry solid in a closed, dark pack, and it is the pack rather than the calendar that sets the shelf life. The indole ring absorbs ultraviolet light and reacts with oxygen, so light, headspace air and moisture drive the changes that show up first as colour and then as related substances. In solution the same reactions run faster, which is why a stick pack or a beverage needs its own stability work instead of a borrowed shelf life. In one lineThe molecule keeps in a closed, dark pack; light, oxygen and moisture in an opened or clear pack set the shelf life, not the calendar. ## The dry solid: slow chemistry, fast appearance change The specification caps water at 0.5%, and the certificate reports what the lot carries. In a sealed foil pouch, away from light and at ordinary warehouse temperature, the assay, the rotation and the related-substance profile move little over a normal shelf life. The reaction that does run is at the surface, where the powder meets light and the oxygen in the headspace. That reaction is visible before it is measurable. A white-to-off-white powder takes on a cream or yellow tint as the indole ring is oxidised, while the HPLC assay can still sit inside 98.5–101.5%. Colour is therefore a useful early indicator, and it is the reason the specification carries an appearance line at all. Heat alone is not the main risk. Tryptophan decomposes well above drying and blending temperatures, so a dry process at normal temperature leaves it largely unchanged; the combination that matters is heat with moisture, and heat with moisture and an alkaline pH. ## In solution the clock runs faster Dissolved tryptophan is much more exposed. The indole ring absorbs in the near ultraviolet and, in the presence of dissolved oxygen, undergoes photo-oxidation; the solution yellows, new chromatographic peaks appear, and the assay falls. Trace iron and copper catalyse the same pathway at concentrations far below any heavy-metal limit, which is why a beverage trial can fail on a batch of water or an excipient rather than on the amino acid. Alkaline conditions add a second route. Racemisation is base-catalysed, so a warm alkaline solution can move the specific rotation towards zero even while the assay holds. A formulator who sees the rotation drift after a wet process should look at the pH and the temperature of that step before blaming the raw material. The practical controls are ordinary: an amber or opaque container, deaerated water, a nitrogen blanket over the hold tank, a short hold time and a colour check at the end of it. A clear glass beaker on a sunny bench is the worst case, and the most common trial setup. ## The factors, and what each one changes What drives change in L-tryptophan, and what controls it | Factor | What it changes | Control | Light, especially UV | Colour, related substances, assay in solution | Foil pouch, opaque drum, amber or opaque container | Oxygen | Indole oxidation, yellowing | Low headspace, nitrogen flush, closed pack | Heat with moisture | Colour, caking, loss on drying | Dry the pack, keep humidity low, avoid wet hold | Alkaline pH with heat | Specific rotation, D-enantiomer | Keep wet-process pH below neutral; shorten the hold | Trace metals | Oxidation rate | Metal panel on raw materials, stainless or lined equipment | Reducing sugars | Browning with the amino group | Low water activity, low temperature, check the blend | Moisture after opening | Caking, loss on drying, flow | Reseal with desiccant, define a use-up period ## A stability protocol that answers the question Run the study on the packed material, not on a powder sample in an open dish. The pack is the variable being tested, so a 1 kg foil pouch and a 25 kg drum are separate entries even when the powder inside is the same lot. The usual design follows the ICH Q1A(R2) pattern: long-term storage at 25 °C and 60% relative humidity, accelerated storage at 40 °C and 75%, with timepoints at 0, 3, 6, 9, 12, 18 and 24 months for the long-term arm and 0, 1, 2, 3 and 6 months for the accelerated one. Add a photostability arm on the packed unit, following the ICH Q1B option: about 1.2 million lux hours of visible light plus 200 W·h per square metre of near ultraviolet, with an identical foil-wrapped unit as the dark control. Testing only the unpacked powder answers a question nobody asked; the buyer receives the pouch. The test panel should be the specification, not a subset: appearance, assay on the dried basis, specific rotation, related substances, loss on drying and microbiology. The acceptance criteria come from the specification, so a study that passes on assay and fails on colour has still found a failure. ## What the formula adds In a capsule, the shell is the light barrier. An opaque hydroxypropyl methylcellulose shell or a two-piece capsule with a pigmented body protects the powder; a clear shell in a transparent bottle is a window. In a stick pack, the foil laminate does the work, and the pack should be specified as opaque rather than “metallised” on trust. Oxygen control is a design decision. A nitrogen flush and a low headspace cost little and remove most of the oxygen that would otherwise react over two years. An antioxidant is not automatically helpful: some antioxidants and metal-containing excipients accelerate the oxidation they are meant to prevent, and the compatibility trial decides. Moisture control is a pack decision plus a formula decision. A desiccant in a bottle, a low-water excipient and a sealed pouch all help; a hygroscopic filler or a wet granulation with a long drying tail works against them. If the process uses water, ask for the granulation solvent, the drying temperature and the hold time, because that step is where a light-sensitive, oxidation-prone powder is most exposed. ## How the shelf life is set The shelf life is assigned from the stability data on the same pack, and it is stated on the specification rather than on a web page. A closed foil pouch stored away from light at 25 °C or below is commonly assigned 24 months; the figure that applies to a lot is the one in its specification, and a supplier who quotes a shelf life without the pack and the storage condition has not quoted one at all. Once a pouch is opened, the clock changes. The powder is then in a humid, lit environment, and the relevant period is a use-up window agreed by the buyer, with the pouch resealed and a desiccant sachet inside where the pack allows it. Write that window down; it is the difference between a stock rotation and a discard decision. The pack itself is described on the MOQ and packaging page, and the certificate lines that would show a stability failure are on the COA page. The water figure is explained in the loss-on-drying note, the chromatographic check in the HPLC method note, and the transport conditions on the logistics page. The catalog specification is on the product page. ### 04 L-Tryptophan: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-tryptophan/moq/ Reviewed: 2026-11-19 The minimum order is 1 kg, packed as a foil pouch and drawn from a released lot, so the smallest order still carries a lot number, a full certificate and a retained sample. Above that the pack is a 25 kg fiber drum, and the lead time is 1–7 days for material in stock. What a quotation needs from the buyer is six details, and the specification revision is the one most often left out. In one lineThe 1 kg pouch is the smallest unit that still comes with a lot number and a full certificate, which is why the minimum order starts there. ## Why the minimum is a kilogram The minimum is set by the paperwork, not by the powder. Every lot is released against a full panel — identity, assay, rotation, related substances, loss on drying, metals, microbiology, particle size — and the cost of that panel sits on the lot rather than on the kilogram. A 1 kg draw lets a formulator qualify a source, run a capsule or blend trial and keep a retention sample, while the lot still has one certificate behind it. Below a kilogram, the handling and documentation cost more than the material, and the buyer usually ends up with a subdivided sample that has lost its lot identity. The 1 kg pouch is therefore the practical floor: it is a released unit, it is labelled, and it can be traced back to the certificate. The minimum does not change with the physical form. A milled or granulated 1 kg is still 1 kg; the finishing step is quoted with it, not as a separate minimum. ## The two packs The 1 kg pack is a foil pouch. The foil is the light barrier, and it also limits moisture ingress, which matters for a powder specified at 0.5% loss on drying or less. The pouch carries the product name, the CAS number, the lot code, the net weight and the storage statement, so the pack and the certificate can be matched without opening anything. The 25 kg pack is a fiber drum with a food-grade liner. It is the unit for a production run, and it is closed and sealed for transport. The liner is part of the specification: a drum without a food-contact liner is a different pack, whatever the outside says. Packs and what they are for | Pack | Typical use | What it protects | 1 kg foil pouch | Qualification, trial batches, small launches | Light, moisture, lot identity | 25 kg fiber drum, lined | Production runs, repeat orders | Light, moisture, handling damage Pack sizes are not the place to economise on a light-sensitive powder. A clear bag inside a drum, or a pouch left open between weighings, gives away the protection the specification was written to guarantee. The storage and handling statement on the logistics page follows the same logic. ## Lead time, and what moves it A stock lot is released and dispatched in 1–7 days. The range exists because the clock starts at the order confirmation: a lot that is already released and packed moves on the short end, and one that needs a certificate re-issue or a label change takes the longer end. The 1–7 days is dispatch, not arrival; transport time depends on the destination and is quoted separately. Two things reliably add time. The first is a finishing step: milling to 80 mesh or granulating a lot is a separate operation and is scheduled after the order. The second is a document that does not exist yet — a customer-specific specification, a private-label artwork check, or a statement the destination market requires. Ask for those before the order, not after it. ## The six details a quotation needs A quotation is only as good as the brief behind it. Six details cover almost every case: - Material and form. L-tryptophan, CAS 73-22-3; if a racemic material is intended, say so, because it is a different product and a different label ingredient. - Quantity and pack. Kilograms, and whether the order is pouches, drums or a mix. - Specification revision. The version you are buying against, plus any parameter to add — a related-substance limit, a tighter rotation, a milled particle size. - Destination and delivery term. The country of import and the Incoterm decide the documents and the freight. - Document set. Certificate, specification, allergen, GMO and irradiation statements, food-grade declaration, safety data sheet — name the list you need. - Date required. The date the material has to be at your site, not the date you would like it dispatched. Most delays trace to item three. A buyer who sends a quantity and a product name, but not the specification revision, gets a quotation against the catalog specification, and the gap surfaces at goods-in. ## Samples, and what a sample should carry A sample is drawn from a released lot, sealed in a small light-protective pack, and sent with the lot number and the matching certificate. It is not a scoop from the top of a drum: the value of a sample is that it is the same material, from the same lot, as the delivery it precedes. Keep the sample. When the first drum arrives, the retained sample and the delivered material can be compared side by side on appearance, on rotation and, if needed, on a chromatogram. A sample without a lot number cannot do that, and a certificate without a sample leaves the comparison to memory. Sample size and dispatch are agreed with the quotation; the material cost of a small sample is not the point, the lot identity is. ## What the order terms cover The fixed part of an order is short: minimum 1 kg, the pouch or the lined drum, the 1–7 day dispatch for stock, the certificate and the document set released with the lot, and a retained sample held against the delivery. The variable part is the specification revision, the finishing step, the destination and the document list. Order changes cost least before the lot is packed. Once a pouch is labelled or a drum is sealed, a change to the pack or the artwork becomes a re-pack, and a change to the specification may need a new certificate. Send changes in writing and confirm the revision number on the order acknowledgement. The price is not published on this page; it is quoted against the six details above. The lines that the certificate will show are on the COA page, the form decision is on the grade page, and the documents a regulated market expects are on the compliance page. The catalog specification is on the product page, and an enquiry can be started from the contact page. ### 05 Where L-tryptophan is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-tryptophan/compliance/ Reviewed: 2026-11-19 L-tryptophan is sold as a food supplement ingredient in the EU, the US and the UK, and each market answers four questions separately: whether the form is permitted, which contaminant limits apply, what the label must say, and what may be claimed. The L form, the DL form and 5-HTP are different label ingredients, so the file is written for the form that is in the drum. No market permits a disease claim for the ingredient. In one linePermission, contaminant limits, labelling and claim wording are four separate checks, and each market answers them with its own instrument. ## Three markets, three instruments The routes are not interchangeable. The EU and the UK rely on general food law for an amino acid, with national rules in some member states; the US regulates it as a dietary ingredient under DSHEA. A specification written for one market is not automatically adequate for another. The instrument behind each market | Market | Main instrument | What it decides | EU | Regulation (EC) No 178/2002; Directive 2002/46/EC; Regulation (EU) 2023/915; Regulation (EU) No 1169/2011; Regulation (EC) No 1924/2006 | Food use, supplement labelling, contaminant limits, claims | UK | Retained food law; Food Information Regulations 2014; retained contaminant limits; the GB claims register | GB food use, labelling, limits, claims; Northern Ireland follows the EU under the Windsor Framework | US | FD&C Act section 201(ff); 21 CFR 111; 21 CFR 101.36 | Dietary ingredient status, cGMP, Supplement Facts, claims This is a sourcing reference, not legal advice; check the current text. ## EU and UK: general food law, not a positive list L-tryptophan is an amino acid, not a vitamin or a mineral. The positive list in Annex II to Directive 2002/46/EC covers vitamin and mineral forms and does not list tryptophan, so the supplement rules come from general food law plus the national rules of the member state where the product is sold. Check the destination before the artwork is signed off. Contaminants are a separate check. As of this review, Regulation (EU) 2023/915 sets the limits for food supplements at lead 3.0 mg/kg, cadmium 1.0 mg/kg and mercury 0.10 mg/kg, with no harmonised arsenic limit. Those figures apply to the finished product, so the ingredient specification should be tighter and should state an arsenic limit the buyer sets. Labelling follows Regulation (EU) No 1169/2011 and, for a supplement, Directive 2002/46/EC. In Great Britain, retained food law applies, including the Food Information Regulations 2014 and the retained contaminant limits, which carry the same lead, cadmium and mercury figures. The permitted-forms schedules do not cover amino acids, so the GB route is the same general food law. Northern Ireland follows the EU rules, and the two texts can diverge after an amendment. The commercial history belongs in the file too. A contaminant-related event in 1989 led to withdrawal in several markets, and the US restriction was lifted in 2001. That episode is why the related-substance profile, the manufacturer's identity and the lot traceability are reviewed before a new source is approved. ## US: a dietary ingredient under DSHEA L-tryptophan is sold in the US as a dietary ingredient under section 201(ff) of the FD&C Act. An amino acid with a pre-1994 marketing history is normally filed against that history rather than a new dietary ingredient notification, and the file should state that basis. The buyer's obligation is separate: 21 CFR 111 requires identity testing of each component on receipt, which is where the rotation earns its place. The Supplement Facts panel is set by 21 CFR 101.36. It declares the amount of the dietary ingredient per serving; there is no Daily Value for tryptophan, so no percentage is shown, and the ingredient name should match the certificate. A structure/function claim must be truthful, substantiated and accompanied by the DSHEA disclaimer, with an FDA notification within 30 days of first marketing. Disease claims are not permitted. There is no federal maximum level for lead in dietary supplements. Many US buyers work to California's Proposition 65, where the maximum allowable dose level is 0.5 µg/day and the no-significant-risk level is 15 µg/day; exposure comes from the daily dose, so a mg/kg figure alone does not answer the question. The Proposition 65 note sets out the calculation. ## Metal limits in the file Metal limits used for an L-tryptophan supplement file | Parameter | EU and GB | US | Lead | 3.0 mg/kg in the supplement | No federal limit; Proposition 65 exposure model | Cadmium | 1.0 mg/kg in the supplement | No federal limit; specification limit | Mercury | 0.10 mg/kg in the supplement | No federal limit; specification limit | Arsenic | No harmonised supplement limit; buyer sets one | No federal limit; specification limit The catalog specification carries its own limits: Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg. Those are ingredient limits, not a substitute for the finished-product calculation. A finished product made with a compliant ingredient can still exceed a finished-product limit when the daily dose is high or when other ingredients contribute metals. The heavy-metals note explains the difference between an ingredient limit and an exposure limit. ## The claims boundary and the label name In the EU and the UK, health claims are governed by Regulation (EC) No 1924/2006 and the retained equivalents, with authorised wording held in the EU register and the GB register. Check the register for the wording and the market; an authorisation in one does not carry into the other. In the US, a structure/function claim is possible if it is truthful, not misleading, substantiated and accompanied by the DSHEA disclaimer; it still cannot be a disease claim. Keep the claim file separate from the specification file. The name is where compliance starts. A product labelled “L-tryptophan” is not satisfied by a racemic drum, and 5-HTP is a different ingredient, not a variant of tryptophan. The grade page shows what changes when the form changes. ## The file a buyer should hold - Specification naming L-tryptophan, CAS 73-22-3, the assay method and basis. - Batch certificate with IR, ninhydrin, assay, rotation, related substances, loss on drying, residue on ignition, pH, metals, microbiology and particle size. - Contaminant report with limits and quantification levels, including the arsenic limit. - Allergen, GMO, irradiation and animal-input statements for the lot. - Food-grade declaration and the manufacturer's food-safety certification. - Safety data sheet and the storage statement. - Label artwork with the name, the amount per portion and market particulars. - Claim file with the wording, the register entry or US substantiation, and any disclaimer. The COA page describes the certificate lines, and the identity page the tests that keep the name honest. ## Checklist before the first order - Name the market and, in the EU, the member state. - Confirm that specification, certificate and label all name L-tryptophan, not “tryptophan”. - Check contaminant limits against the finished-product rule and set arsenic. - Check the label particulars: food supplement, Supplement Facts or both. - Check claim wording against the EU or GB register, or US substantiation. - Confirm the documents above exist for the lot, not the product family. - Record the specification revision and lot code on the order. The catalog specification and the form are on the product page; the market notes are at EU, US and UK. ### 06 How we prove an L-tryptophan lot is the L form URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-tryptophan/identity/ Reviewed: 2026-11-19 An L-tryptophan lot is the L form when four independent results agree: the identity tests on the certificate, the specific rotation, the HPLC assay against a standard, and the related-substance profile. The assay alone proves none of that — a DL lot can sit inside the same 98.5–101.5% window. The rotation is the simplest check on the enantiomer, and the line most often missing from a quotation. In one lineNo single test proves the L form: identity is the assay, the rotation, the chromatogram and the impurity profile agreeing on one lot. ## Four layers, four different questions Identity is not one test: each layer answers a question the layer below cannot. The four identity layers for L-tryptophan | Layer | Test | Question it answers | What it cannot see | Document | Name, CAS 73-22-3, manufacturer, lot code | What the seller says the drum contains | The drum itself | Structure | IR spectrum and ninhydrin reaction | An amino acid of this structure | Which enantiomer | Chirality | Specific rotation | L, D or a racemic mixture | Which impurity is present | Purity | HPLC assay and related substances | How much, and what else is in the peak | The D enantiomer The order matters. A document without a rotation leaves chirality open; a rotation without a related-substance panel leaves the impurity profile open; a chromatogram without a rotation leaves the enantiomer open. Only the four together describe the material. ## The rotation is the identity line for the L form Specific rotation is measured on a dissolved sample at the sodium D line and corrected for path length and concentration: [α] = observed rotation ÷ (path in dm × concentration in g/mL). The catalog window for L-tryptophan is −29.4° to −32.8° on the dried basis. A racemic DL lot reads close to zero; a lot enriched in the D form reads positive; a lot that reads −25° is a mixture, not a slightly low L. The measurement is small and easy to do badly. At 1 g per 100 mL in a 1 dm cell, −31° produces an observed rotation of about −0.3°, so temperature, dissolution and a clean cell matter. If the certificate gives a rotation without solvent, concentration and temperature, ask for the conditions; without them the number cannot be reproduced. ## The L:D ratio behind the rotation The ratio that matters is enantiomeric, not elemental. Specific rotation is proportional to the excess of one enantiomer, so the observed value divided by the pure-L value gives the enantiomeric excess. At −29.4° against a pure-L reference near −31.5°, the excess is about 93%: an L fraction near 97% and a D fraction near 3%, or roughly 29:1. State it that way, because "L-tryptophan" alone does not fix the ratio: a racemic lot reads near zero and passes an assay window. The calculation needs solvent, concentration, temperature and cell length, because the same lot reads differently in water and acid. ## XRD and the limits of a crystal pattern L-tryptophan is crystalline and gives a well-defined powder pattern, but XRD cannot answer the identity question here. The D and L enantiomers form mirror-image lattices whose powder patterns coincide, so a diffractogram cannot separate an L lot from a D-enriched one. Chirality comes from rotation or chiral HPLC. XRD can still separate a crystalline lot from an amorphous spray-dried one, detect crystalline lactose in a blend, or compare a suspect lot with a reference. It cannot quantify an amorphous impurity. For release, IR and rotation carry identity; XRD is a request item. ## The assay proves quantity, not handedness The assay is a reversed-phase separation with UV detection near 280 nm against an external standard. It identifies the main peak by retention time, measures the area, and reports on the dried basis after correction for loss on drying. It is a good quantity check and a poor identity check: the D enantiomer has the same UV spectrum, retention on a C18 column and response factor. Peak purity from a diode-array detector helps with co-eluting indole species, because their spectra differ slightly from tryptophan's. It does not help with the enantiomer, which is spectroscopically identical. A certificate that reports only assay and appearance is therefore not an identity document, whatever its percentage. The chromatographic method is in the HPLC note, the infrared identification in the FTIR note. ## What the related-substance panel adds The related-substance panel describes everything else in the drum. It should report the individual peaks, their sum, the column, detection wavelength, gradient and limit of quantification. A total without individual figures cannot distinguish one large impurity from six small ones, and those are different quality problems. The peaks usually come from three places: process intermediates from the indole or serine chemistry, other amino acids carried through fermentation or hydrolysis, and degradation products formed in drying or storage. A lot with a clean assay and a rising total has been reworked or stored badly, and the colour often agrees with the chromatogram. ## The routes that put the wrong material in the drum Common substitutions and the line that catches them | Route | How it shows | What to ask for | DL substituted for L | Rotation close to zero while the assay passes | Rotation in the specification and on the COA | D enrichment | Rotation below the L window | Chiral HPLC on a suspect lot | 5-HTP added or substituted | Extra peak, different retention, mass 220 | LC-MS identification of the peak | Other amino acids | Assay low, extra peaks, nitrogen high | Individual related substances with limits | Non-amino diluent | Residue on ignition high, rotation weak | Residue, assay and IR on the same sample None is caught by the assay alone, and only the first two by the rotation alone. The panel and the rotation are complementary: one sees the enantiomer, the other everything else. ## Writing identity into the specification A specification a laboratory can work to has seven lines: the name L-tryptophan with CAS 73-22-3; identification by IR and ninhydrin; specific rotation with solvent, concentration and temperature; assay by HPLC on the dried basis; related substances with individual and total limits, method and quantification limit; appearance as white to off-white crystalline powder; and particle size, at least 95% through 40 mesh. Three lines are identity, one quantity, one purity, two physical. The pack belongs in the same document, because a light-sensitive powder in a clear bag will not hold the appearance or related-substance profile for the shelf life assumed. The catalog specification is on the product page, the certificate lines on the COA page, and the form comparison on the L versus DL page. ## Five questions for a supplier - Which form does the certificate name, and what is the specific rotation with its solvent, concentration and temperature? - What are the individual related substances, their total, the method and the limit of quantification? - Is the D enantiomer tested, and on which column? - Who manufactured the lot, and does the lot code match on the drum, certificate and retained sample? - What is the light barrier of the pack, and what storage statement supports the shelf life? A supplier who answers all five in writing describes a material, not a catalogue entry. The answers belong in the qualification file beside the grade decision and the market documents. ### 01 What the COA for L-tyrosine actually contains URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-tyrosine/coa/ Reviewed: 2026-11-19 The certificate for an L-tyrosine lot reports appearance, infrared identification, the ninhydrin reaction, assay by HPLC on the dried basis, specific rotation, loss on drying, residue on ignition, pH, particle size, the heavy-metal panel and microbiology. Each line needs a method and the release limit; the ranges here are the catalog specification, and the batch COA confirms one drum. In one lineThe assay says how much tyrosine is in the sample; the rotation says it is the L form, and the dried basis says what the percentage measures. ## Reading the certificate line by line Read the sheet line by line: each row should name what was measured, how, and against which limit. Identity, assay and water · L-tyrosine | Parameter | Method | Release limit | Appearance | Visual | White crystalline powder | Identification | Infrared absorption | Conforms to reference spectrum | Identification | Ninhydrin reaction | Conforms; free α-amino acid | Assay (dried basis) | HPLC | 99.0–101.0% | Specific rotation | Polarimetry, 1 N HCl | −11.0° to −12.3° (dried basis) | Loss on drying | Gravimetric | ≤0.5% | Residue on ignition | Gravimetric, ashed | ≤0.1% | pH (saturated solution) | Potentiometry | 5.0–7.0 Physical, contaminant and microbiological limits | Parameter | Method | Release limit | Particle size | Sieve analysis | ≥95% through 40 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent The first table identifies the substance; the second the powder. A certificate with an assay and no rotation has counted the material but not identified it. ## HPLC, the dried basis and the rotation The assay is an HPLC result. The phenol group of tyrosine absorbs in the ultraviolet, so a reverse-phase method with UV detection is the usual route. A reproducible method note lists the column, the mobile phase, the standard and the calculation. A percentage without them is a claim, not a measurement. The dried basis removes the water from the denominator. Divide the result by the dry matter and the figure rises; at ≤0.5% water the lift can reach half a point, enough to cross the 99.0% line. The 101.0% ceiling is there for the standard's response and the method's variation, not because the molecule can exceed 100% purity. Loss on drying covers water and volatiles, and residue on ignition covers the inorganic ash. Neither is a purity figure, and the assay is not simply 100% minus those lines: an impurity that does not absorb at the detection wavelength can sit in the sample without moving the main peak. Where the risk assessment needs that coverage, add a related-substance test rather than infer purity from the assay. The specific rotation is measured on the dried material in 1 N hydrochloric acid, so the certificate should state the concentration, the temperature and the path length beside the figure. The window of −11.0° to −12.3° is the optical signature of the L configuration; a racemate or a salt will not sit inside it by accident, but rotation narrows the field rather than naming the amino acid. The pH is taken on a saturated solution: a figure outside 5.0–7.0 points to acid or alkali carried over from crystallisation, or to a different salt. ## Release limit versus batch result The release limit is the gate; the batch result is the measurement. They belong in separate columns, with the method beside both. A column filled with the specification range is a copy of the gate, not a measurement. Release limits and the result each line should carry | Line | Release gate | Batch result on the certificate | Assay | 99.0–101.0% on the dried basis | One lot figure, with method and drying basis | Specific rotation | −11.0° to −12.3° on the dried basis | One lot figure, with solvent and conditions | Loss on drying | ≤0.5% | One figure; no lower bound | Heavy metals | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Four figures, one per metal The two-sided lines — assay, rotation, pH — need a figure that can be read against both ends of the range. The one-sided lines — loss on drying, residue, the metals — pass anywhere below the limit. “Passes specification” is a conclusion, not a measurement. ## What moves between batches Moisture is the variable that moves first. The dryer's end-point, the packing-room air and the state of the liner all land in the loss-on-drying figure, and the dried-basis assay follows. A lot can pass the assay window while carrying more water than the last one, which appears as caking and poor flow before it appears as a rejection. Rotation is more stable, which makes a real shift easier to see. A change of a degree inside the window deserves a look, because rotation is the only release line that tracks the enantiomeric ratio. D-tyrosine drags the reading toward zero; a small amount can remain inside the gate, which is why rotation is a screen and not an enantiomeric purity grade. pH and particle size are the practical variables. A shortened wash leaves acid or alkali and moves the pH; a change in milling moves the 40-mesh fraction and the flow. Colour is less quantitative and often more revealing: a cream or tan tint can point to a hot drying step or a trace of metal while the assay passes, so ask for the batch record before rejecting on colour. ## When to order an outside test A new source, a first regulated-market shipment, a rotation close to the limit, or a disputed result are the usual reasons to go outside. The panel can be narrow: rotation on a fresh solution, chiral HPLC for D-tyrosine, IR, loss on drying, ICP-MS and a plate count. Give the referee laboratory a defined brief: rotation on a freshly prepared solution, a chiral HPLC result for the D enantiomer, and the detection limit that result was measured against. A “not found” result is only as useful as its limit. If the numbers disagree, test the retained sample and trace the lot code across the certificate, the pack and the referee's report. ## What to compare between suppliers A useful comparison puts six lines together: the declared name and form; the assay with its method and basis; the rotation with its conditions; loss on drying; pH and particle size; and the contaminant and micro panels. If two suppliers match on the assay but sit at opposite ends of the rotation window, the powders are not the same material. Traceability is the next layer. The lot code on the certificate, the pack and the retained sample should be one string, and both the manufacturing site and the pack date belong on the certificate. The catalog specification sits on the L-tyrosine product page. The forms are set side by side on the grade page; the case that separates the L form from a racemate is on the identity page; the release workflow is on the quality page. The separation is explained in the HPLC method note, and loss on drying is defined in the glossary. ### 02 L-tyrosine or N-acetyl-L-tyrosine: choosing a grade URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-tyrosine/grades/ Reviewed: 2026-11-19 L-tyrosine and N-acetyl-L-tyrosine are different label ingredients, not two purity grades of one material. L-tyrosine is the free amino acid, sparingly soluble in water; N-acetyl-L-tyrosine, usually shortened to NAT, is the acetylated derivative, far more soluble and about 81% tyrosine by mass. The format and the panel decide which one fits, and a switch changes both. In one lineThe two forms are different label ingredients: NAT dissolves far better, carries about 81% tyrosine by mass, and cannot be declared as L-tyrosine. ## Why the form is the grade Both materials can be 99% pure and still be different products. The purity figure describes how much of the named molecule is in the drum; it says nothing about which molecule that is. L-tyrosine is a crystalline amino acid with a free amino group and a phenol. NAT carries an acetyl group on the nitrogen, which removes the free amine, raises the molecular weight and changes the solubility, the pH and the analytical behaviour. The label follows the molecule. An ingredient list that says L-tyrosine describes the free amino acid; a list that says N-acetyl-L-tyrosine describes the derivative. The two names are not interchangeable in a specification, a certificate or a panel. A drum change without an artwork change is a labelling defect. Solubility is the practical reason the choice comes up. L-tyrosine is sparingly soluble at neutral pH, so a meaningful dose does not dissolve in a small volume. NAT is many times more soluble, which is why it appears in drink mixes and stick packs where a clear solution is wanted; the trade is mass and label position. ## The two forms side by side L-tyrosine and N-acetyl-L-tyrosine · what differs | Property | L-tyrosine | N-acetyl-L-tyrosine | Chemical name | L-tyrosine, the free amino acid | N-acetyl-L-tyrosine, the acetylated derivative | CAS number | 60-18-4 | 537-55-3 | Formula and molecular weight | C9H11NO3 · 181.19 g/mol | C11H13NO4 · 223.23 g/mol | Tyrosine per gram | 1.00 g | About 0.81 g | Water solubility at 25 °C | About 0.45 g/L | About 25 g/L | Ninhydrin reaction | Positive; free α-amino group | Negative unless the sample is hydrolysed | Solution pH | Saturated solution 5.0–7.0 | More acidic; no free amine to balance the carboxyl | Usual format | Capsule, tablet, dry blend, suspension | Drink mix, stick pack, clear liquid | Label name | L-tyrosine | N-acetyl-L-tyrosine The solubility figures are order-of-magnitude guides for formulation, not release limits. The assay on the certificate belongs to the material in the drum, and the two assays are not interchangeable: an L-tyrosine assay does not measure NAT, and a NAT assay does not report tyrosine. ## Solubility, pH and the powder L-tyrosine is a zwitterion. Its solubility rises in dilute acid and in alkali, and it is lowest near its isoelectric point, which is why a neutral drink is the hardest matrix for the free amino acid. A 500 mg dose needs more than a litre of water at 25 °C to dissolve completely; in a 250 mL bottle it will sit as a dispersion unless the formula is built around that fact. NAT dissolves in roughly a fiftieth of that volume. The acetyl group also changes the taste and the acidity: with the amine acetylated, the carboxyl dominates and the solution is more acidic than a tyrosine solution, which matters for a stick pack, a preservative system and the flavour. A solubility check in the final matrix is still needed: sugar, salts and other actives change the picture. The powder itself is specified separately. L-tyrosine is standard at ≥95% through 40 mesh, with 80 mesh milling and granulation available for flow and blend uniformity. NAT has its own particle-size and bulk-density specification, and the water limit belongs beside it: an acetylated powder that picks up water can cake and lose flow before the assay moves. ## The content conversion The label declares the ingredient, and the two ingredients carry different amounts of tyrosine per gram. The conversion is the molecular-weight ratio: 181.19 divided by 223.23 gives 0.8116, so one gram of NAT carries about 811 mg of tyrosine. Going the other way, divide the tyrosine figure by 0.8116 to find the NAT weight. Tyrosine content and the NAT weight that carries it | L-tyrosine declared | N-acetyl-L-tyrosine for the same tyrosine | 100 mg | 123 mg | 250 mg | 308 mg | 500 mg | 616 mg | 1,000 mg | 1,232 mg The arithmetic does not make the two label declarations equal. If the panel says L-tyrosine 500 mg, the drum must contain L-tyrosine, not 616 mg of NAT. If the panel says N-acetyl-L-tyrosine 600 mg, the tyrosine content is a calculation for the formulator, not a second declared ingredient. The certificate, the purchase order and the panel should all use the same name and the same basis. The conversion also changes the fill. A capsule filled with 500 mg of L-tyrosine may not hold 616 mg of NAT at the same bulk density, and a stick pack sized for 500 mg of the free acid has room for the larger NAT weight. Size the pack for the form that will actually run. ## What changes when you switch - Name and CAS: the specification, certificate, label and purchase order all move from 60-18-4 to 537-55-3, and the ingredient name changes with them. - Assay and standard: the HPLC method, the reference standard and the reported basis belong to the named molecule; a tyrosine assay cannot release NAT. - Identity tests: infrared and ninhydrin behave differently because the free amino group is gone; a specification that keeps the tyrosine identity tests will fail a genuine NAT lot. - Solubility and pH: the matrix and the taste change, and the pH of the solution moves with the free carboxyl group. - Water and stability: NAT is more soluble and can hydrolyse in aqueous solution, so a drink needs its own stability data rather than the dry powder's. - Regulatory status: NAT is a separate ingredient, and its permission is not automatic because L-tyrosine is permitted. Check the destination market before the label is fixed. The specification should name the form in its first line. A clause that says “L-tyrosine or N-acetyl-L-tyrosine” describes two materials and releases neither. ## When each form fits Stay with L-tyrosine when the product is a capsule, a tablet or a dry blend, when the panel already names the free amino acid, and when the dose fits the fill without a solubility step. The free amino acid is the simpler label position and analytical target. Choose NAT when the product is a drink, a stick pack or a liquid where the dose has to dissolve in a small volume, and when the market accepts the ingredient and the panel can name it. Test the finished matrix, not only water: the solubility that matters is the solubility in the formula, at the pH and temperature of the process. The comparison is carried further on the L-tyrosine versus NAT page. The release tests for the free amino acid are on the COA page, the dry-pack behaviour on the stability page, and the market status on the compliance page. The product hub carries the catalog specification, and assay is defined in the glossary. ### 03 L-tyrosine is stable dry; solubility and the matrix decide the rest URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-tyrosine/stability/ Reviewed: 2026-11-19 L-tyrosine is stable as a dry crystalline powder. The failures come from water, pH and the matrix: the free amino acid is only sparingly soluble, so a drink or a stick pack is a dispersion unless the formula is built around that fact. A sealed pack, a controlled water content and a matrix that does not hold the powder at an extreme pH cover most of the shelf-life question. In one lineA sealed dry pack keeps L-tyrosine stable; the risk sits in water, pH and the matrix, where the powder is only sparingly soluble. ## The dry powder The crystalline solid is the easy part. L-tyrosine is not highly hygroscopic, and a sealed pack at warehouse temperature holds its assay for a long time. The ≤0.5% water limit is still a release line: surface water turns a free-flowing powder into a cake, and a cake is a dosing problem before it is a chemical one. Clumping has a short list of causes: humidity in the packing room, an unsealed liner, a temperature cycle that condenses water inside the bag, and pallet pressure on a warm stack. Lumps that break under light pressure are usually surface water; a hard cake is a pack failure, and the lot should be quarantined. The standard packs are a 1 kg foil pouch and a 25 kg fiber drum with an inner liner. The liner is the barrier, not the drum wall, so an opened drum is not a controlled pack unless the liner is closed again. A desiccant supports the liner in a humid destination; it does not replace a sealed seam. ## The solution Solubility shapes every liquid formula. L-tyrosine is sparingly soluble at neutral pH, about 0.45 g/L at 25 °C, and least soluble near its isoelectric point. A 500 mg dose needs more than a litre of water; in a 250 mL bottle it is a suspension, which has to be stabilised, shaken and labelled as one. pH moves the solubility. The zwitterion dissolves in dilute acid and in alkali, so an acidic stick pack carries more tyrosine than a neutral drink. The alkaline route has a penalty: the phenol is more prone to oxidation and colour at high pH, especially with light, oxygen and trace metals. The acidic route is gentler on the phenol but harder on taste and on acid-sensitive partners. Heat and light act on the dissolved molecule more than on the dry solid. A hot-filled beverage gives the amino acid more opportunity to react, and a clear bottle on a lit shelf gives the phenol more opportunity to yellow. An opaque pack, nitrogen, a chelator and a lower process temperature are the usual controls; each must be tested in the finished matrix. ## What moves the shelf life Stability factors · L-tyrosine in powder and in formula | Factor | What it does | Control | Water and humidity | Caking, flow loss, a rise in loss on drying | Sealed liner, ≤0.5% water, desiccant where needed | pH | Sets solubility; alkaline pH favours oxidation and colour | Buffer to the target, test the range, not only the midpoint | Heat | Accelerates colour and degradation in solution | Lower process temperature, cooling after fill | Light | Yellowing of the dissolved phenol | Opaque or amber pack, carton, light-protective label | Oxygen and metals | Oxidation and colour, catalysed by trace iron and copper | Nitrogen, chelator, metal limits in the specification | Matrix | Salts, sugars and acids change solubility and reactivity | Compatibility trial in the finished formula One matrix deserves a separate line: reducing sugars under heat. The free amino group can take part in a browning reaction, and a drink or stick pack with both a reducing sugar and a hot process is where to look for colour before the assay moves. ## A stability protocol Test the material and the product separately. For the powder, the core panel is appearance, assay by HPLC, specific rotation, loss on drying, pH of a saturated solution, related substances and the micro envelope. The rotation belongs in the panel because racemisation is the one degradation route that an assay alone would miss. Use the standard conditions: 25 °C/60% relative humidity for long-term storage and 40 °C/75% relative humidity for the accelerated arm, with long-term points at 0, 3, 6, 9, 12, 18 and 24 months and accelerated points at 0, 1, 2, 3 and 6. Add photo-stability and shipping-cycle arms where the pack or destination calls for them. Bracketing works across packs of the same material and barrier, not across a pouch and a drum. For the finished product, add what the powder cannot show: solubility or dispersion in the matrix, colour and taste, pH drift and the assay after the process. A stick pack needs an in-use test with the water the consumer will use; a beverage needs a test at the end of its declared shelf life. ## The matrix decides the rest A capsule or a tablet is the simplest home for L-tyrosine. The powder is dry, the excipients are dry, and the main risks are flow, fill weight and the water the shell can pick up in a humid room. A 40-mesh grade is the standard fill; an 80-mesh milled or granulated grade is the choice when blend uniformity or flow needs it. A powder stick is a dry blend until the consumer adds water. The solubility problem then arrives at the point of use, so the pack must be sized for a volume that can hold the dose, the formula must be acidic enough to carry more tyrosine, or the form must change to N-acetyl-L-tyrosine (NAT). A ready-to-drink beverage has the same question plus a heat process and a real shelf life. A suspension is a legitimate answer for the free amino acid: mill the powder, choose a suspending system, control the particle size and label the shake. It avoids the solubility limit rather than solving it, and it needs its own stability data because a suspended solid can settle, cake or change its dissolution profile. ## Shelf life and the pack Shelf life comes from stability data on a named pack; the drum's release assay does not set it. The dry powder in a sealed pouch or drum can support a multi-year retest period; a stick pack or beverage is limited by the matrix, process and pack, and its number is usually shorter. Write the storage statement to match the data: cool, dry, sealed and away from direct light for the powder, with a specific instruction only if the stability data supports it. An opened pouch is a different pack with a different use-up period; say so in the handling instructions. The release tests are on the COA page, the two forms are compared on the grade page and on the L-tyrosine versus NAT page, and the packs and minimum are on the MOQ page. The product hub carries the catalog specification, and retained sample is defined in the glossary. ### 04 L-Tyrosine: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-tyrosine/moq/ Reviewed: 2026-11-19 L-tyrosine is stocked from 1 kg, sealed in a foil pouch, with 25 kg fiber drums for production. The published lead time is 1–7 days once the specification and the purchase order are fixed. Form, mesh, pack and destination are the four variables that turn that baseline into a quotation. In one lineOne kilogram from a released lot is the qualification unit; the pack, the mesh and the destination market set the rest of the order. ## Why the minimum is one kilogram The 1 kg pouch is the smallest pack that stays tied to a lot number. It covers a bench trial, a repeat run after the formula changes, and a retained sample that can be kept for the project's life. A smaller amount is a hand sample: enough to look at, not enough to release a lot, defend a label or compare two suppliers. The minimum is a pack, not a bulk threshold. A buyer who needs 500 g is better served by a sample than by a split pouch, because the split loses the heat-sealed seam and the lot label. A buyer who needs 30 kg takes a drum plus pouches; the drum has its own liner and freight profile. ## The packs, and what each one protects Standard packs · L-tyrosine crystalline powder | Pack | Net weight | Construction | Typical use | Watch | Foil pouch | 1 kg | Foil laminate, heat-sealed seams | Trial batch, retained sample, small run | A folded top is not a seal | Fiber drum | 25 kg | Fiber drum with sealed inner liner | Full-scale production | The liner is the barrier, not the drum wall The pack label should show the product, form, lot, net weight and pack date, and the lot string must match the certificate. A desiccant can supplement the liner in a wet climate, but it cannot repair a seam that was folded rather than sealed. Non-standard pack sizes are quoted, not stocked. L-tyrosine is not classified as dangerous goods, so the pack is about protection, not transport class. The pouch is the unit a lab can open without touching a drum; the drum is the unit a production run draws from. Once a drum is opened, close the liner and write the date on the label, or the remainder is no longer a controlled pack. ## Lead time The clock starts when two things are fixed: the specification and the order. An enquiry is not a confirmation, and a PO against a different specification resets the clock. Stock in the standard 40-mesh pack moves quickly; 80-mesh milling or granulation starts when the line schedules it, not when the email arrives. Paperwork runs alongside production. A destination that asks for a certificate of origin, a local-format SDS or a third-party certificate will not ship on commercial documents alone, so agree the document list before the PO. A public holiday in the shipping week adds a week in practice. ## What the quotation needs A quotation is only comparable if it answers six questions. “L-tyrosine 99%” plus a weight is not enough, because two suppliers can mean different forms, basis and packs. - The form and the mesh: 40 mesh crystalline, 80 mesh milled, or granulated. - The specification: assay method and basis, specific rotation, loss on drying, pH, particle size, the contaminant panel and the version that will be released against. - The quantity and the pack: the number of 1 kg pouches, 25 kg drums, or both, and whether a desiccant is required. - The destination and the delivery term, so freight and documents are quoted on one basis. - The documents: certificate of analysis, technical data sheet, safety data sheet, origin and allergen statements, the source route and the animal-derived input statement. - Any extra test or sample: a third-party rotation, a chiral check, or a lot sample for the buyer's laboratory. ## Samples Ask for material from the lot that will be supplied, with the same lot number on the bag and the certificate. Confirm it was drawn before sealing, not scooped from an opened drum. Order enough for the trial and a retained portion; a second request adds a week. The sample is where the certificate stops and the powder starts: flow, dispersion, caking after a week on the bench, colour against the last lot. For L-tyrosine the dispersion test matters more than a dissolution number, because 500 mg does not dissolve in a small volume at neutral pH. ## Where the terms stop Payment, delivery term, validity and the document list belong in the quotation. This page covers the minimum, the packs and the lead time; the commercial terms sit in the offer. The minimum is quoted per line, so a mixed order is broken into separate lines. Three clauses are worth spelling out in the PO. The specification governs release, so a different mesh, water limit or form means a fresh specification and a fresh quotation. The certificate belongs to the lot, so the same lot code should appear on the certificate, the pack and the invoice. And the form has to be named: a PO for L-tyrosine should not accept N-acetyl-L-tyrosine. Packaging and moisture behaviour are on the stability page; release testing is on the COA page; market requirements are on the compliance page. The forms sit side by side on the grade page, the product hub carries the catalog specification, and MOQ and lead time are defined in the glossary. ### 05 Where L-tyrosine is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-tyrosine/compliance/ Reviewed: 2026-11-19 L-tyrosine is used as a food supplement ingredient in the EU, the US and the UK, but the permission, the contaminant ceiling, the label wording and the claim are four separate checks. The EU has no harmonised positive list for amino acids in supplements; the US regulates L-tyrosine as a dietary ingredient under DSHEA; the UK applies retained EU law. The file has to show the form, the market and the evidence for each check. In one lineIngredient status, contaminant ceilings, label wording and claims are four separate checks, and each market answers them in its own instrument. ## The four checks The first question is whether the ingredient may be sold in the market at all. The second is whether the finished product stays under the contaminant limits. The third is whether the label names the ingredient and the amount correctly. The fourth is whether any health claim attached to it is authorised and substantiated. A batch certificate supports all four, but it replaces none of them. The operator placing the product on the market owns the file. A supplier's certificate is an input, not a defence, and the rules below are a sourcing reference rather than legal advice. Each market's current text and the destination's national guidance decide the label. ## European Union Directive 2002/46/EC harmonises food supplements, but its positive list in Annex II covers vitamins and minerals, not amino acids. L-tyrosine therefore sits under general food law, Regulation (EC) No 178/2002, and under any national rules the destination Member State applies. It has a history of use before 15 May 1997 and is not a novel food; confirm the entry in the EU Novel Food Catalogue for the specific form. There is no harmonised maximum level for tyrosine in a supplement, and some Member States apply their own notification or composition rules. The supplement particulars come from Directive 2002/46/EC and the general labelling rules from Regulation (EU) No 1169/2011. N-acetyl-L-tyrosine (NAT) is a different ingredient with a different status file; a permission for L-tyrosine does not carry over to it. ## United States L-tyrosine is a dietary ingredient under DSHEA. The supplier should be able to support the position that it was marketed in the US before 15 October 1994; an ingredient in that position does not need a new dietary ingredient notification. The product is made under the dietary supplement cGMP in 21 CFR 111, and the panel follows 21 CFR 101.36. The FDA does not approve supplements or their ingredients before sale, so the file is the evidence. A structure/function claim is allowed if it is truthful, not misleading and substantiated, and if the label carries the DSHEA disclaimer. The manufacturer must notify the FDA within 30 days after marketing a product with such a claim. A claim that names a disease, or that implies a disease outcome, is outside that route. Advertising is also subject to FTC substantiation. ## Contaminant limits Heavy-metal limits that apply to a food supplement · EU, US and UK | Metal | EU · Regulation (EU) 2023/915 | US federal | UK retained limits | Lead | 3.0 mg/kg in food supplements | No numeric federal limit; cGMP applies | 3.0 mg/kg | Cadmium | 1.0 mg/kg; 3.0 mg/kg for seaweed-based supplements | No numeric federal limit; cGMP applies | 1.0 mg/kg | Mercury | 0.10 mg/kg | No numeric federal limit; cGMP applies | 0.10 mg/kg | Arsenic | No harmonised limit for supplements; the buyer sets one | No numeric federal limit; cGMP applies | No harmonised limit; the buyer sets one Two points decide how those figures are used. First, the EU and UK limits apply to the food as placed on the market, not to the drum. The raw-material limit is a purchasing limit, and it needs headroom for method uncertainty, other ingredients and the finished-product test. Second, the US federal position is not a numeric ceiling. California's Proposition 65 sets a lead maximum allowable dose level of 0.5 µg per day, a cadmium level of 4.1 µg per day and an inorganic arsenic level of 10 µg per day, so a daily dose can require a warning even when no federal limit is broken. The catalog limits for L-tyrosine are Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg. The lead, cadmium and mercury figures sit at or below the EU and UK ceilings; the arsenic figure is a buyer-set limit because neither regime sets a harmonised one for supplements. ## The claim boundary In the EU and the UK, a health claim must be authorised and appear in the applicable Register; Regulation (EC) No 1924/2006 also requires the claim to be truthful, clear and substantiated. As of this review the EU Register does not list an authorised claim for L-tyrosine as such, so the label should not attach a body-function claim to the ingredient unless a current entry is found. The same check applies in the GB Register. In the US, a structure/function claim is possible under DSHEA with the disclaimer and the FDA notification, but a disease claim is not. The practical test is the same in all three markets: the claim has to describe the product, not a disease, and the file has to carry the evidence behind it. ## The document file Documents a brand should hold for an L-tyrosine lot | Document | What it supports | Market | Batch certificate of analysis | Release against the specification, with methods and results | All | Specification | The agreed limits, methods and basis | All | Technical data sheet | Solubility, particle size, handling and pack | All | Safety data sheet | Hazard and handling information | All | Allergen and GMO statements | Composition and labelling declarations | EU, UK, US | Novel food or dietary ingredient statement | The market entry position for the form | EU, UK, US | Origin and manufacturer statement | Traceability and the source route | All | Heavy-metal and micro reports | The contaminant and hygiene envelope | All | Packaging and food-contact declaration | The pouch or drum in contact with the powder | EU, UK, US ## The checklist - Name the form and match CAS 60-18-4; NAT is a different ingredient. - Confirm the market entry position for that form, including the Member State rules in the EU and the GB Register in the UK. - Set the raw-material contaminant limits below the finished-product ceiling, and set an arsenic limit because the EU and UK do not. - Check the daily dose against the contaminant figures and, for the US, against the Proposition 65 dose levels. - Match the label name and the declared amount to the certificate and the purchase order. - Check every claim against the Register or the DSHEA route. - Collect the documents in the table against the lot number, not against the product name alone. - Ask for the source route and the animal-derived input statement, because fermentation and synthesis routes carry different declarations. The release tests behind the file are on the COA page, the form choice on the grade page and the L-tyrosine versus NAT page, and the identity evidence on the identity page. The product hub carries the catalog specification, the metals are described in the ICP-MS method note, and heavy metals is defined in the glossary. ### 06 How we prove an L-tyrosine lot is the L form URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-tyrosine/identity/ Reviewed: 2026-11-19 An L-tyrosine lot is proved in layers: the record names the material, infrared and ninhydrin confirm the functional groups, specific rotation assigns the L configuration, and HPLC fixes the amount. The assay is the weakest single proof: it can pass a racemate, a different amino acid or N-acetyl-L-tyrosine (NAT). In one lineThe rotation assigns the configuration, the chromatogram measures the amount, and neither one alone proves that the drum is L-tyrosine. ## Four layers of identity Work from the paperwork to the instrument, then to the configuration, then to the powder. The layers answer separate questions, and the blind spot in one is covered by the next. Identity layers for L-tyrosine and what each one misses | Layer | What it answers | Check | What it cannot show | Record | What the lot is meant to be | Name, CAS 60-18-4, lot code | Nothing about the drum | Substance | Whether the molecule is tyrosine | IR, ninhydrin, HPLC retention | D and L look the same | Configuration | Whether it is the L form | Specific rotation, chiral HPLC | Quantity; a small D excess | Form and purity | Whether the powder matches the specification | HPLC assay, loss on drying, residue, pH, mesh | Configuration Start with the assay and you are looking at the one number compatible with every failure mode: 100% can still be the racemate, the acetylated derivative or a blend. ## Specific rotation and the L configuration Specific rotation is how enantiomeric composition appears in a polarimeter. Divide the observed reading by the cell path in decimetres and by the concentration in grams per millilitre, then compare the result with the pure enantiomer. The catalog range is −11.0° to −12.3° on the dried basis in 1 N hydrochloric acid; the certificate should state the concentration, temperature and path length. The sign is the first evidence. L-tyrosine reads negative in this solvent; D-tyrosine reads positive, and a racemate sits near zero. A few per cent of D pulls the reading toward zero and then outside the window. Rotation is a practical gate for the bulk configuration, not an enantiomeric purity grade: a small D admixture can sit inside the window. Where the risk assessment needs the ratio rather than the gate, add chiral HPLC. A chiral method separates the enantiomers and reports the D figure with a detection limit. “D-tyrosine not detected” without that limit describes the method's sensitivity, not the sample. The pH of a saturated solution is a different check. L-tyrosine is a zwitterion and its saturated solution sits between 5.0 and 7.0, near the isoelectric point. A figure outside that window points to acid or alkali left from crystallisation, or a different salt; it does not assign the configuration. ## The solid state, IR, XRD and the pH Infrared spectroscopy reads the functional groups: phenol, carboxylate and amine. It separates L-tyrosine from N-acetyl-L-tyrosine, because the acetylated material has an amide and no free amine, and it is the routine identity test. It does not separate L from D: the enantiomers have the same functional groups and the same spectrum. X-ray diffraction reads the crystal lattice. L-tyrosine is crystalline, so a pattern is a fingerprint of the solid form and a useful check that a milled or granulated lot is the same crystal form. It is not a configuration test: the enantiomers give the same powder pattern, so XRD can raise a flag but cannot clear the L form. Particle size and pH finish the picture of the drum. The standard grade is ≥95% through 40 mesh, and a milled or granulated lot should carry its mesh in the specification. The pH is a solution check; the mesh is a physical one. Neither is identity on its own, and both belong beside the tests that are. ## The substitution routes Substitution routes for L-tyrosine and the test that catches each | Route | Signature | Test that catches it | D-tyrosine or a DL mixture | Rotation moves toward zero; assay unchanged | Specific rotation, chiral HPLC | N-acetyl-L-tyrosine sold as L-tyrosine | More soluble; about 81% tyrosine by mass; no free amine | Ninhydrin, IR, HPLC retention | Another amino acid or a blend | Assay may pass; related profile changes | HPLC peak purity and related substances | A salt or a diluted powder | pH, residue or assay moves with the diluent | pH, residue on ignition, assay The first route is the one an assay cannot see. D-tyrosine has the same molecular weight, UV spectrum and retention time on an achiral column; only rotation or a chiral method separates it. The second route is a label failure before it is an adulteration: NAT is a legitimate ingredient, but it is not L-tyrosine, and a certificate that reports a tyrosine figure for an acetylated powder describes a different material. The other amino acids are the quieter risk. L-phenylalanine is the closest structure, one hydroxyl away, and absorbs in the ultraviolet; L-DOPA carries a catechol and absorbs strongly; glycine has no chromophore and can sit in a non-specific assay. A diode-array detector and a related-substance panel are the practical answer. ## How to write the specification line An enforceable specification fixes three things at once: the molecule, its configuration and the basis of the assay. A workable line reads: “L-tyrosine, CAS 60-18-4, 99.0–101.0% on the dried basis by HPLC; specific rotation −11.0° to −12.3° on the dried basis in 1 N HCl; identification by IR and ninhydrin conforms; loss on drying ≤0.5%; residue on ignition ≤0.1%; pH 5.0–7.0; particle size ≥95% through 40 mesh; heavy metals Pb ≤3, As ≤2, Cd ≤1, Hg ≤0.1 mg/kg; APC ≤1,000 cfu/g, yeast and mould ≤100 cfu/g, E. coli and Salmonella absent.” Three clauses carry the weight. “L-tyrosine” excludes NAT. “Dried basis” blocks a silent water correction. The rotation sits in the release tests, not in a side conversation, because an unwritten limit disappears when the supplier changes. Add a chiral D-tyrosine limit and a NAT-absent clause where the risk assessment calls for them. Add the mesh for a milled or granulated lot; the certificate is judged against the specification, so every identity test should appear in it. ## Five questions to put to a supplier - Do the certificate and the pack name L-tyrosine, or N-acetyl-L-tyrosine? - What rotation did this lot give, in which solvent, at what concentration and temperature, and on which basis? - What D-tyrosine figure did a chiral method return, and what detection limit applies? - Which HPLC method and standard gave the assay, and is the result calculated on the dried material? What are the loss on drying, residue and pH? - Can you send the infrared spectrum, the related-substance or other-amino-acid profile, and the metals and micro results for this lot? Five answers of that kind describe a material, not just a drum. The certificate that should carry those answers is described on the COA page; the forms are compared on the grade page and on the L-tyrosine versus NAT page. The product hub carries the catalog specification, the separation is explained in the HPLC method note, and assay is defined in the glossary. ### 02.1 L-tyrosine vs N-acetyl-L-tyrosine: solubility, dose and the label URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-tyrosine/grades/l-tyrosine-vs-nat/ Reviewed: 2026-11-19 N-acetyl-L-tyrosine dissolves roughly fifty times better in water than L-tyrosine, but it carries only about 81% tyrosine by mass. A 500 mg tyrosine dose therefore becomes about 616 mg of NAT, a different ingredient name on the label and a different stability question. Solubility, dose and label move together, and the form has to be chosen before the artwork is set. In one lineNAT dissolves roughly fifty times better than L-tyrosine but delivers about 81% tyrosine per gram, so the drink and the label change together. ## Two molecules, not two grades L-tyrosine is the free amino acid. N-acetyl-L-tyrosine, or NAT, carries an acetyl group on the nitrogen; the phenol and the carboxyl group are still there, but the free amine is not. That single change raises the molecular weight from 181.19 to 223.23 g/mol, removes the ninhydrin reaction, increases the water solubility and makes the solution more acidic. L-tyrosine and N-acetyl-L-tyrosine · the numbers that drive the choice | Property | L-tyrosine | N-acetyl-L-tyrosine | CAS number | 60-18-4 | 537-55-3 | Formula and molecular weight | C9H11NO3 · 181.19 g/mol | C11H13NO4 · 223.23 g/mol | Tyrosine per gram | 1.00 g | About 0.81 g | Water solubility at 25 °C | About 0.45 g/L | About 25 g/L | Free amino group | Yes | No; acetylated | Ninhydrin reaction | Positive | Negative unless hydrolysed The purity figure does not decide between them. Both can be 99% pure and still be different ingredients, and a certificate for one does not release the other. ## Solubility is the first constraint L-tyrosine is a zwitterion and least soluble near its isoelectric point, close to the pH of a neutral drink. At 25 °C water holds about 0.45 g/L. A 500 mg dose in 250 mL is 2 g/L, four times the solubility, so the powder sits as a dispersion unless the formula is stabilised, acidified or labelled as a suspension. NAT is far more soluble, about 25 g/L at 25 °C in supplier data. The same 616 mg in 250 mL is about 2.5 g/L, well inside that figure, so the drink can be clear at room temperature. The volumes below are theoretical minima; wetting, dissolution rate and other ingredients add to the water a real product needs. Water needed at 25 °C · calculated from approximate solubility | Tyrosine declared | L-tyrosine dose | Water for the L form | NAT for the same tyrosine | Water for the NAT form | 100 mg | 100 mg | About 220 mL | 123 mg | About 5 mL | 250 mg | 250 mg | About 560 mL | 308 mg | About 12 mL | 500 mg | 500 mg | About 1.1 L | 616 mg | About 25 mL | 1,000 mg | 1,000 mg | About 2.2 L | 1,232 mg | About 49 mL Read the table as a ceiling, not a recipe. A 250 mL drink is comfortable for 616 mg of NAT but not for 500 mg of L-tyrosine; a 500 mL bottle is still short for the free amino acid. In a capsule the solubility question disappears and the free amino acid is the more mass-efficient choice. ## The content conversion The conversion is the molecular-weight ratio: 181.19 divided by 223.23 is 0.8116, so one gram of NAT carries about 811 mg of tyrosine. To find the NAT weight for a tyrosine figure, divide by 0.8116. To find the tyrosine in a NAT weight, multiply by 0.8116. The assay has to be read on the same basis. A NAT certificate at 99.0% means 99.0% of the NAT molecule, which is about 80.3% tyrosine by mass, not 99.0% tyrosine. A supplier who quotes a “tyrosine 99%” figure for an acetylated powder is either reporting a different basis or describing a different material; ask which. The conversion is arithmetic, not a label permission. If the panel declares L-tyrosine 500 mg, the drum must contain L-tyrosine. If it declares N-acetyl-L-tyrosine 600 mg, the tyrosine content is a calculation for the formulator, not a second ingredient on the panel. ## What fits the dosage form A capsule is the natural home of L-tyrosine. A 500 mg fill is a standard shell size, the powder is dry, and solubility never matters because the capsule is swallowed. The same dose as NAT needs about 616 mg plus excipients, which may push the fill into a larger shell for no benefit. A stick pack or a ready-to-drink beverage is the natural home of NAT. The powder has to dissolve in the water the consumer adds, and 616 mg of NAT in 250 mL is a realistic clear drink where 500 mg of L-tyrosine is not. The trade is more powder, a more acidic taste and a hydrolysis question in the liquid. A tablet sits with the capsule: dry, mass-sensitive and indifferent to solubility. A suspension is the third route: mill the powder, choose a suspending system, control the particle size and label the shake. It avoids the solubility limit rather than solving it, and it needs its own stability data. ## Declaring the form on the panel The ingredient name is the first decision. In the EU, the ingredient list under Regulation (EU) No 1169/2011 names what is in the product; in the US, the Supplement Facts panel under 21 CFR 101.36 declares the dietary ingredient; the UK applies retained labelling rules. “L-tyrosine” and “N-acetyl-L-tyrosine” are two names for two ingredients and cannot stand in for each other. The declared amount follows the name. A panel that says L-tyrosine 500 mg is a promise about the free amino acid; a panel that says N-acetyl-L-tyrosine 600 mg is a promise about the derivative. A tyrosine equivalent may be useful in a technical sheet, but it does not replace the ingredient name or the declared weight on the panel. A switch is a label, specification and certificate change, not a sourcing change. The artwork, purchase order, release tests and stability data move together. NAT's regulatory status is also separate from L-tyrosine's, so check the destination market before printing. ## Choosing between the two forms Choose L-tyrosine for a capsule, tablet, dry blend or suspension, when the panel names the free amino acid, and when the label and file should stay on the simpler ingredient. Choose NAT for a clear drink or stick pack that must carry the dose in a small volume, when the market accepts it and the label can name it. Test the finished matrix before fixing the decision. Solubility in water is a starting point; solubility in an acidic stick pack, sweetened beverage or preserved liquid is the number that matters. NAT also needs a hydrolysis check over shelf life, because the acetyl group can come off in solution; L-tyrosine needs a dispersion check if the formula cannot dissolve it. The broader choice is set out on the grade page, and the release tests for the free amino acid are on the COA page. The dry-pack and solution behaviour is followed through on the stability page, the market position on the compliance page, and the product hub carries the catalog specification. ### 01 What the COA for betaine anhydrous actually contains URL: https://nutrition.rainwoodbio.com/products/amino-acids/betaine/coa/ Reviewed: 2026-11-19 A betaine anhydrous COA should carry appearance, IR identification, the titration assay, loss on drying, residue on ignition, pH, 30-mesh particle size, heavy metals and microbiology. Each line needs the method and the release limit, and the assay needs its basis. The values below describe the catalog grade; the batch COA is the record for one drum. In one lineThe assay figure means little without its basis, so the certificate has to put titration, water and the anhydrous declaration on the same line. ## Reading the certificate line by line A certificate becomes auditable when each row answers three questions: what was measured, how it was measured, and the release limit it was measured against. A row that gives only a value asks the reader to trust the supplier's conclusion. Identity, assay and water · betaine anhydrous | Item | Method | Release limit | Appearance | Visual | White crystalline powder | Identification | IR | Conforms to reference | Assay (anhydrous basis) | Titration | 97.5–102.5% | Loss on drying | Gravimetric | ≤2.0% | Residue on ignition | Gravimetric | ≤0.1% | pH (5% solution) | Potentiometry | 5.0–7.0 Particle size, contaminants and microbiology | Test | Method | Limit | Particle size | Sieve analysis | ≥95% through 30 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent The particle-size line is a release test, not a courtesy: a 30-mesh powder and a milled 60-mesh powder behave differently in a capsule filler. ## What the titration measures, and on which basis Betaine is an inner salt: a quaternary ammonium centre and a carboxylate on the same molecule. The usual assay is a non-aqueous acid–base titration, with perchloric acid in glacial acetic acid and a potentiometric end point. Each millilitre of 0.1 N perchloric acid corresponds to 11.72 mg of C5H11NO2, using the molecular mass of 117.15 g/mol. The certificate should name the titrant, the end-point method and the equivalence factor; a percentage without those details cannot be reproduced in another laboratory. The 97.5–102.5% window only has meaning with a basis. On the anhydrous basis, the water result is divided out of the assay. On an as-is basis, the water is still inside the figure. The difference is not academic at a 2.0% loss-on-drying limit. For example, 97.0% as-is with 2.0% water becomes 97.0 ÷ 0.98, or 98.98% on the anhydrous basis. The same powder can look just inside one window and comfortably inside the other. A titration also has a blind spot: it counts titratable carboxylate, not chloride or a neutral filler. That is why an infrared identity line and a water line belong beside the assay. The upper end sits above 100%, which is normal for a titration normalised to an equivalence factor; the window is a release gate, not a mass-balance statement. ## Release limit versus batch result The limit is the gate; the result is the measurement. A useful certificate shows both, in separate columns, with the method beside them. A result column that merely repeats the release range has given the reader the gate, not the measurement. Loss on drying is the line where the distinction matters most. A result of 0.8% and a limit of ≤2.0% tell a reader something about handling; a result of 1.9% tells a reader that the lot is close to the edge before the drum is opened. The first is a comfortable release, the second is a warning about the pack and the storage that follow. pH and particle size are release tests with practical consequences. A reading near 5.0 is inside the specified window, not a defect. A mesh result of “≥95% through 30 mesh” says nothing about the fraction that stays on the sieve, and that fraction can segregate in a blend. ## What moves between lots Water is the first mover. Betaine anhydrous is hygroscopic, so a drum opened in a humid room gains water at the surface, and the next loss-on-drying result reflects the handling as much as the manufacturing. The assay moves with the water when it is reported as-is; on the anhydrous basis it should be steadier, which is one reason the basis has to be printed. pH moves with the crystallisation and the rinse; a shift from 6.4 to 5.2 is still inside the window, but it can signal a different water wash. Particle size moves with milling, and colour with drying. A drift across three or four lots is more informative than any single result close to a limit. Assay and water belong together. A low as-is assay with a high loss on drying is not necessarily low in betaine; a high as-is assay with a low loss on drying may simply be drier. The anhydrous calculation separates the two effects. ## When to order an outside test Use an outside laboratory when the source is new, the market is regulated and the shipment is the first, the form claim is not supported by the certificate, or a result is contested. Keep the panel focused: titration for the assay, IR for identity, loss on drying for the anhydrous state, a chloride test to exclude the hydrochloride, and ICP-MS for the heavy-metal panel, on a single submitted sample. Require a detection limit with every screen. Without one, “not detected” says more about the instrument than about the powder. The titration report should give the sample mass, titrant concentration and equivalence factor, not only the percentage. The sample that was tested should be the sample that was kept, and the laboratory report should carry the same lot code as the drum. When a result is contested, the retained sample is the referee's sample. ## What to compare between suppliers Compare six lines: form and CAS number; assay result and basis; loss on drying; pH; particle size; and the identity method. Matching assay figures are not enough; the other five lines decide whether two offers describe the same powder. Traceability is the next layer. The same lot code should appear on the certificate, the drum, the packing list and the retained sample, and the certificate should name the plant, not only the trading company. A certificate can be correct for the lot and still fail to describe the drum that was shipped. The betaine anhydrous product page lists the catalog grade. The choice between the anhydrous and hydrochloride forms is set out on the form comparison page; the tests that separate the two are on the identity page; the release workflow is described on the quality page. The assay and water terms are defined in the assay glossary and the loss-on-drying glossary; the heavy-metal panel is covered in the ICP-MS note. ### 02 Betaine anhydrous or betaine HCl: choosing a grade URL: https://nutrition.rainwoodbio.com/products/amino-acids/betaine/grades/ Reviewed: 2026-11-19 Betaine anhydrous and betaine hydrochloride are different label ingredients, not two strengths of one material. The anhydrous inner salt is the betaine molecule itself, specified at 97.5–102.5% by titration, while the hydrochloride carries about 76% betaine and an acidic pH. The choice follows the betaine dose, the dosage form and the name the label can use. In one lineThe two forms deliver different amounts of betaine per gram and sit at different pH, so the grade follows the dose and the dosage form. ## One molecule, two sold forms Betaine is trimethylglycine: a glycine backbone with three methyl groups on the nitrogen and a carboxylate on the same molecule. That arrangement makes it an inner salt, electrically neutral overall but charged at both ends. The names betaine, trimethylglycine and TMG describe the same substance; betaine anhydrous describes the form with no water of crystallisation. Betaine hydrochloride is a different salt. One equivalent of hydrochloric acid sits with the molecule, so the formula becomes C5H11NO2·HCl and the molecular mass rises from 117.15 to 153.61 g/mol. The extra mass is not betaine. It is the acid and the chloride, and it changes the pH, the hygroscopicity and the number the label has to declare. ## The two forms side by side Betaine anhydrous and betaine hydrochloride · form comparison | Property | Betaine anhydrous | Betaine hydrochloride | Formula | C5H11NO2 | C5H11NO2·HCl | CAS number | 107-43-7 | 590-46-5 | Molecular mass | 117.15 g/mol | 153.61 g/mol | Betaine per gram | all of the molecule | about 76.3% | pH (5% solution) | 5.0–7.0 | about 1 | Water limit | ≤2.0% loss on drying | — | Label name | Betaine anhydrous | Betaine hydrochloride | Usual format | Capsules, tablets, powder blends | Acidified powders and tablets The hydrochloride carries its own water limit on its certificate; the catalog limit here belongs to the anhydrous grade. The betaine figure for the hydrochloride is arithmetic, not a specification: 117.15 ÷ 153.61 gives 76.3%. A 1,000 mg label of betaine hydrochloride therefore supplies about 763 mg of betaine. The salt assay may sit in its own release window, but the betaine equivalent is lower by the mass of the acid. ## pH, water and flow The anhydrous form gives a 5% solution at pH 5.0–7.0, close enough to neutral that it does not disturb a simple capsule or tablet formula. The hydrochloride gives a solution near pH 1. That acidity is the point of the salt in some formulas and a problem in others: it can attack acid-sensitive actives, shift the taste of a stick pack and change the behaviour of an effervescent system. Only one of the two is strongly hygroscopic. The anhydrous powder can cake in an open pouch as it takes up water, and the gain appears in the loss-on-drying result. The hydrochloride takes up less water at the same humidity, but it brings an acid load to the powder bed and to the solution. Neither should be left open between weighing and encapsulation. Particle size is a separate variable. The catalog anhydrous grade is ≥95% through 30 mesh, with 60 mesh and granulated versions available on request. Flow, segregation and fill weight follow the mesh and the granulation, not the form alone. A change of form is not the right fix for a flow problem; a change of mesh or a granulated grade is. ## The dose conversion Betaine delivered by each form · arithmetic examples | Betaine target | Anhydrous needed | Hydrochloride needed | 500 mg | 500 mg | 655 mg | 1 g | 1 g | 1.31 g | 2 g | 2 g | 2.62 g The conversion is a multiplication by 1.311, the inverse of 76.3%. It is worth doing before the capsule size is chosen: 2 g of betaine as the hydrochloride is 2.62 g of powder, which may not fit the same capsule as 2 g of the anhydrous form. The same arithmetic applies when two quotations are compared by weight: the powder with the higher betaine fraction delivers more betaine per kilogram. Write the basis into the purchase order. “Betaine anhydrous, 1,000 mg per capsule” and “betaine hydrochloride, 1,000 mg per capsule” are different products with different betaine contents, even though both labels can say 1,000 mg. If the label declares the salt, the betaine equivalent belongs in the specification and in the formula record. ## What to write into the specification - “Betaine anhydrous, CAS 107-43-7, C5H11NO2; not the hydrochloride.” - “Assay 97.5–102.5% by titration, reported on the anhydrous basis, with the water result beside it.” - “Loss on drying ≤2.0%; pH 5.0–7.0 in 5% solution; ≥95% through 30 mesh.” - “Identity by IR; chloride absent or below the agreed limit.” - “If betaine hydrochloride is supplied instead, the label name, the salt assay and the betaine equivalent must be declared.” The form name is the first line for a reason. A specification that says only “betaine 98%” leaves the salt question open, and the certificate can then satisfy the number with either form. The label, the dose and the pH all follow from that one word. ## When the other form is the right one Choose the anhydrous form when the formula needs the highest betaine mass per capsule, a near-neutral solution or a powder blend that cannot take a strong acid. Choose the hydrochloride when the purchase order and the label name the salt, and when the acidified matrix is intended and has been tested with that acid load. Do not switch forms to solve a flow, taste or stability problem before the mesh, the excipients and the pack have been checked; the form change is a formulation change, not a processing tweak. The detailed comparison of dose, pH and label wording is on the anhydrous versus hydrochloride page. The COA page shows what the certificate reports; the tests that separate the forms are on the identity page; water uptake and shelf life are covered on the stability page; the compliance page covers the label rules. The product page lists the catalog grade. ### 02.1 Betaine anhydrous vs betaine HCl: dose, pH and the label URL: https://nutrition.rainwoodbio.com/products/amino-acids/betaine/grades/anhydrous-vs-hcl/ Reviewed: 2026-11-19 The two betaine forms differ in more than the label: betaine anhydrous is the inner salt at 97.5–102.5% by titration and pH 5.0–7.0, while betaine hydrochloride is the chloride salt at about 76% betaine and a pH near 1. A formula written for one form cannot be switched to the other without recalculating the dose and rechecking the pH, the capsule fill and the label. In one lineBetaine anhydrous and betaine HCl are not interchangeable at equal weight: the salt delivers about three-quarters as much betaine and brings a strong acid with it. ## Two salts, one betaine Betaine is trimethylglycine, a zwitterion with a quaternary ammonium group and a carboxylate. In the anhydrous form the molecule is sold as the inner salt, CAS 107-43-7, formula C5H11NO2, molecular mass 117.15 g/mol. In the hydrochloride form one equivalent of hydrochloric acid is added, giving C5H11NO2·HCl, CAS 590-46-5 and a molecular mass of 153.61 g/mol. The difference is not a grade or a concentration. It is a different chemical on the certificate, a different ingredient on the label and a different number in the capsule. The betaine part is the same; everything around it is not. ## The dose conversion The hydrochloride is 76.3% betaine by mass (117.15 ÷ 153.61). To deliver a target amount of betaine, divide by 0.763, or multiply by 1.311. The table gives the common targets. Betaine equivalent by form · worked amounts | Betaine target | Anhydrous | Hydrochloride | 500 mg | 500 mg | 655 mg | 1 g | 1 g | 1.31 g | 2 g | 2 g | 2.62 g The conversion changes the fill weight. A capsule that holds 500 mg of the anhydrous powder will not hold 655 mg of the hydrochloride without a change of size, and a stick pack built around 2 g of anhydrous betaine needs 2.62 g of the salt for the same betaine label. The excipients and the overage, if any, are separate decisions. State the basis on the purchase order and on the formula record. “1,000 mg betaine” and “1,000 mg betaine hydrochloride” are not the same instruction, even though both can produce a label that reads 1,000 mg. ## pH, water and the acid load The anhydrous form gives a 5% solution at pH 5.0–7.0. That is close enough to neutral for a simple capsule or tablet, and it is the reason the anhydrous grade is the usual choice when the betaine is one ingredient among many. The hydrochloride gives a solution near pH 1. The acid is not a contaminant; it is part of the salt, and it arrives in the formula with the betaine. The anhydrous powder is hygroscopic. It takes water from humid air, and the gain appears in the loss-on-drying result and in caking. The hydrochloride takes up less water at the same humidity, but its acidity can attack acid-sensitive actives and change the taste and the local pH of a powder blend. Neither form should be left open in a production room. Solubility is high for both, so dissolution is rarely the limit in a capsule or a stick pack. The practical limits are fill weight, flow, taste and the sensitivity of the other ingredients. A form change can solve one of those and create another. ## What each form fits For capsules and tablets, the anhydrous form usually gives the most betaine per unit and the least acid load. A 500 mg capsule can carry 500 mg of betaine as the anhydrous powder; the same capsule carries about 382 mg of betaine as 500 mg of the hydrochloride. If the label target is high and the capsule size is fixed, the anhydrous form is the simpler route. For powder sticks and drink mixes, the choice is more about taste and the rest of the blend. The hydrochloride's acidity can be useful in a formula built around an acid profile, and it can be wrong in a mild, neutral drink. Test the finished mix, not only the raw powder. For acid-sensitive actives, the anhydrous form is the default. The hydrochloride's solution near pH 1 can degrade an active that is comfortable at pH 5–7, and the effect may not show up in a raw-material stability study. For effervescent systems, the acid load belongs in the acid–base balance of the formula, not in the inert-carrier column. ## What the label can say In the EU, the ingredient list names the form that is in the product. “Betaine” or “betaine anhydrous” describes the inner salt; “betaine hydrochloride” describes the salt. The two names are not interchangeable, and any novel-food statement that applies sits alongside the ingredient name, not in place of it. In the US, the Supplement Facts panel states how much of the dietary ingredient is present, and the ingredient list names the source. Where the source is the hydrochloride, the panel should say whether the number is the salt or the betaine. A panel that declares the salt amount and a panel that declares the betaine amount describe different products unless the basis is stated. In the UK, the retained labelling rules follow the same logic: name the form, declare the amount and keep the claim within the authorised register. “Trimethylglycine” is another name for betaine, not a separate ingredient; use one name consistently across the label, the COA and the specification. ## When to choose which Choose the anhydrous form when the target is the highest betaine mass per capsule or tablet, when the formula needs a near-neutral solution, when the other ingredients are acid-sensitive, or when the customer's specification names betaine anhydrous. Choose the hydrochloride when the purchase order and the label name the salt, when the acid profile is intended and has been tested, and when the customer's formula has been built around that form. Do not switch forms to fix a flow, taste or stability problem before the mesh, the excipients and the pack have been checked. A form change is a formulation change: it moves the dose, the pH, the capsule fill and the label at once. Run a trial with the new form in the finished matrix, and update the specification and the artwork before the first production order. The wider comparison is on the form comparison page; the COA page shows what the certificate reports; the water and pack question is on the stability page; the compliance page covers the label rules. The product page lists the catalog grade. ### 03 Betaine is hygroscopic; the pack and the matrix decide the shelf life URL: https://nutrition.rainwoodbio.com/products/amino-acids/betaine/stability/ Reviewed: 2026-11-19 Betaine anhydrous is chemically robust but hygroscopic: the crystal takes water from the air, and that water is what turns a free-flowing powder into a cake and shortens the usable life of an opened pack. The molecule does not need a cold chain; the pack, the closure and the matrix around it decide how long the lot stays in specification. A shelf life should belong to a pack and a formula, not to the name on the certificate. In one lineThe betaine molecule is not the weak point; water ingress and the matrix are, so the pack and the formula set the shelf life. ## Water is the first failure mode Betaine anhydrous is hygroscopic. Left open in a humid room, the surface of the powder takes up water before the centre does, and the next loss-on-drying result is a map of how the drum was handled. The catalog limit is ≤2.0%, which leaves little room for a pouch that is opened and closed several times in a production room. The visible result is caking. Water bridges the crystals, the powder loses flow, and a capsule filler starts to show weight variation before the assay moves at all. The invisible result is a rise in water activity, which matters when the blend also contains a nutrient source that could support growth. The pack is the first control. A foil-laminated pouch with a sealed seam, a fiber drum with a food-grade liner, and a closure that is reclosed properly matter more than the storage temperature. A desiccant in the outer carton can help; a desiccant in direct contact with a food powder is a different decision and should be agreed with the customer. ## In water and in the formula Betaine dissolves freely in water, and the 5% solution sits at pH 5.0–7.0. The molecule has no ester or amide bond to hydrolyse, so pH alone does not shorten its life in a simple aqueous system. What changes is the physical state: a concentrated solution can crystallise on cooling, and a dilute solution is a microbial system like any other, with preservative and water activity belonging to the formula rather than to the betaine. In a powder blend, the relevant water is not the water you add; it is the water that moves between ingredients. A hygroscopic excipient can pull water from the air and hand it to the betaine, or the reverse. The formula's equilibrium moisture content, not the certificate's loss on drying, is what the tablet or capsule will see. Heat is a lesser factor. The solid is reported to decompose near 293°C, far above drying, blending and compression temperatures. A hot spot in a dryer can still change colour and flow, and water can migrate between ingredients; those are process effects, not decomposition. ## What actually moves the shelf life What moves betaine anhydrous in the pack and in a blend | Factor | Effect | Control | Humidity and water | Uptake, caking, loss-on-drying drift | Foil pouch, drum liner, dry weighing room | Temperature | Drying, colour, moisture migration | Ambient storage; avoid hot spots | pH | Little direct effect on betaine | Check the matrix, not the raw material | Light | No major pathway in the solid | Opaque or labelled pack | Metal ions | Colour and matrix reactions | Source control; chelator in formula | Reducing sugars | Matrix browning possible; betaine has no free amine | Monitor the blend, not the betaine alone | Compression | Capping, flow, fill weight | Granulation and lubricant choice | Pack and closure | Barrier and reclose behaviour | Sealed liner; in-use test Betaine itself has few chemical pathways to failure; the blend, the pack and the handling have many. A programme that tests only the powder in a sealed bag answers a question the customer is not asking. ## A stability protocol that fits the question Start with the pack and the matrix you intend to sell, not with the raw material in a laboratory jar. A standard design uses an accelerated arm at 40°C/75% relative humidity and a long-term arm at 25°C/60% relative humidity, with an intermediate arm at 30°C/65% relative humidity where the climate justifies it. These are the conditions familiar from ICH Q1A(R2); a food supplement is not a drug, but the logic of accelerated and long-term data is the same. Test at zero, one, two, three and six months on the accelerated arm, and at zero, three, six, twelve and twenty-four months on the long-term arm if the intended shelf life needs it. At each point, measure assay on the anhydrous basis, loss on drying, pH of a 5% solution, appearance, mesh or flow, and microbiology. Add a water-activity check if the formula contains a nutrient source that could support growth. Run a separate in-use test: open, take a portion, reclose and repeat on the customer's production schedule. The in-use result predicts caking in the filling room; the sealed-pack result predicts the warehouse. ## The matrix decides more than the molecule In a capsule, the anhydrous powder is usually the simplest choice: high betaine mass per fill, near-neutral pH and no acid load on the shell. In a tablet, granulation can improve flow and reduce segregation, but the granulation water has to be removed before compression, and the tablet's equilibrium moisture content has to be checked in its own right, not only against the raw-material limit. In a stick pack or drink powder, the betaine meets the other powders and the flavor system. An acidic component can shift the taste and the local pH; a hygroscopic sugar or salt can change the water balance. The hydrochloride form adds its own acidity to that system, which may be intended in one formula and unacceptable in another. Acid-sensitive actives are the clearest case for the anhydrous form. An active that is comfortable at pH 5–7 can lose potency in the hydrochloride's low-pH environment, and a raw-material study may not show it. Test the finished blend, not only the betaine. ## Assigning a shelf life The assigned shelf life should come from data on the pack you buy and the matrix you sell. A supplier's technical data sheet can state a retest period for a sealed 25 kg drum; that period does not automatically transfer to a 1 kg pouch that is opened every week, or to a tablet that contains an acidic partner. Ask for the pack-specific statement, the storage condition behind it and the tests that support it. If the answer is a single number with no pack and no test list, the number is a convention, not a result. The COA page shows which release tests feed that data; the MOQ page describes the packs the data should cover; the form comparison explains why the hydrochloride brings a different matrix question. The product page lists the catalog grade, and the loss-on-drying note defines the test behind the 2.0% limit. ### 04 Betaine anhydrous: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/amino-acids/betaine/moq/ Reviewed: 2026-11-19 The minimum order for betaine anhydrous is 1 kg, packed as a foil pouch, and the standard bulk pack is a 25 kg fiber drum. The 1 kg unit exists so a formulator can qualify a released lot before committing to a drum, not as a retail pack. Lead time for a released lot is typically 1–7 days, and a quotation needs six details from you. In one lineOne kilogram is the trial unit: enough to prove a released lot at bench scale without turning the first order into stock. ## Why the minimum is one kilogram A kilogram is a practical trial quantity. At 1 g of betaine per capsule, it is enough for roughly a thousand capsules before process loss, which covers a bench batch, a short encapsulation run and a retain sample. It is also small enough that a buyer can test the material without opening a purchase order for a drum that may sit for a year. The unit is drawn from a released lot, not from a separate “sample” production. That distinction matters: the powder in the pouch should carry the same lot code as the drum the customer will order next, so the trial result and the production result describe the same material. Ask for the lot code on the pouch, the certificate and the packing list to match. One kilogram is not a retail pack and it is not a free sample. It is a sale unit with the same specification, certificate and traceability as the 25 kg drum. A buyer who needs less than a kilogram for a feasibility test should ask whether a smaller draw can be taken from the reserved lot; that is a commercial question, not a change to the minimum. ## The two standard packs Betaine anhydrous · standard packing | Pack | Net content | Typical use | Foil pouch | 1 kg | Trial, qualification, small batch | Fiber drum | 25 kg | Production, blending, repacking The pouch is the moisture barrier. Betaine anhydrous is hygroscopic, so the foil laminate, the seam and the reclose feature do more for the shelf life than the outer carton. The drum should have a food-grade inner liner and a lid that seals; a fiber drum without a liner is a shipping container, not a moisture barrier. Ask three questions before the pack is fixed. Is the pouch foil-laminated, or is it a metallised film with a lower barrier? Is the drum liner food-grade and intact at the rim? Is a desiccant used, and where is it placed? The answers belong in the specification, because a pack change is a stability change and may need its own data. Labels should carry the product name, the form, the CAS number, the lot code, the net content, the storage condition and the manufacturer. A private-label pack needs the customer's artwork approved before production; the label text is part of the regulatory file, not a print job that can be corrected later. ## Lead time A released lot is typically quoted at 1–7 days. The range covers the difference between a pack that is already in stock and one that has to be filled, labelled and documented for a specific order. A change of mesh, a granulated grade, a private-label artwork or a destination that needs legalisation can add time; those are production steps, not delays in dispatch. The clock should start when the purchase order, the specification and the shipping details are agreed, not when the first email is sent. A quote that promises a date before the specification is fixed is a guess. Ask what the lead time is measured from, and whether the lot is already released or still in production. ## What a quotation needs Six details change the answer: - Product and form: betaine anhydrous, CAS 107-43-7, not the hydrochloride. - Specification: assay basis, loss on drying, pH, mesh and any extra test the customer needs. - Quantity and pack: 1 kg pouch, 25 kg drum, or a combination of the two. - Destination and Incoterm: the delivery point and who arranges freight and insurance. - Documents: COA, TDS, SDS, certificate of origin, allergen and GMO statements, and any customer-specific declaration. - Label and timing: standard label or private label, artwork status, and the date the material is needed. A quotation that answers only the quantity and the destination is incomplete. The form and the specification decide the commercial basis, the documents decide the destination, and the label decides the production step. Send all six in one message and the quote can be firm rather than indicative. ## Samples and the trial A trial should use the same lot as the first production order. If the sample comes from a different lot, the trial proves that the material can work, not that the lot on order will. Ask for the sample to be drawn from the reserved lot, and keep a portion of it as the retained sample for the trial. The sample should travel with its certificate. A pouch without a COA is a powder with a label; the trial cannot be signed off against a specification that is not attached. If the trial will be run weeks after delivery, check the storage condition and keep the pouch sealed until the day it is opened. ## Terms worth settling before the first order The purchase order should reference the specification, the form, the pack and the certificate. The supplier should confirm that the COA travels with the lot, that the lot code matches the pack, and that a retained sample is kept for the agreed period. Payment terms, Incoterms, insurance and the documents for the destination belong in the quotation, not in a later email. Agree what happens if a result is outside the specification: who tests, which laboratory is the referee, and whether the lot is replaced or credited. That clause is easier to write before the first shipment than after a disputed drum. The COA page lists the tests the certificate should carry; the stability page explains why the pack is part of the specification; the compliance page lists the documents a destination may ask for. The product page has the catalog specification, and the MOQ note defines the term. ### 05 Where betaine is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/amino-acids/betaine/compliance/ Reviewed: 2026-11-19 Betaine is used as a food supplement ingredient in the EU, the US and the UK, but permission is not a single status: it depends on the form, the use level, the market and the label. The EU regulates it through general food law and a novel-food entry for specified uses; the US classifies it as a dietary ingredient; the UK applies retained supplement rules and its own registers. The file has to show the basis for the market, not just the CAS number. In one lineA betaine file has to answer four questions — which form, at what level, under which ceiling, with what label and claim — and each market answers them in its own instrument. ## Four checks, not one The first check is whether the substance may be used in a supplement at all. The second is the level or restriction for that form and market, the third the contaminant ceiling, the fourth what the label and claims may say. A supplier who answers only the first has not answered the other three. Betaine anhydrous and betaine hydrochloride have different CAS numbers, betaine contents and label names; a permission written for “betaine” does not automatically cover the salt. ## European Union Betaine is not a vitamin or a mineral, so it has no entry in Annex I or Annex II to Directive 2002/46/EC on food supplements. Its use is governed by general food law, by Regulation (EC) No 1925/2006, and by the food-supplement rules of the member state of sale. As of this review, betaine has no Annex III entry under Regulation 1925/2006, so it is not on the Union's prohibited or restricted list. Betaine as specified in Commission Implementing Regulation (EU) 2019/1294 is an authorised novel food, and its entry in the Union list (Implementing Regulation (EU) 2017/2470) sets the permitted food categories, maximum levels and a label statement. That entry is not a general permission for every use or dose: a betaine supplement must be checked against the current Union list and the member state's supplement rules. Regulation (EU) No 1169/2011 requires the ingredient list to name the form actually in the product: “betaine” and “betaine hydrochloride” are not interchangeable. The novel-food label statement, where it applies, sits beside the usual information. ## United States US law regards betaine as a dietary ingredient under DSHEA. The supplier should be able to state the basis: a history of use before 15 October 1994, or a new dietary ingredient notification. “It is already sold” is not a legal basis. The finished product is made under the dietary supplement cGMPs in 21 CFR 111. The Supplement Facts panel declares the amount of the dietary ingredient. Where a salt is used, the panel and ingredient list should make clear whether the declared amount refers to the salt or to betaine, which differ by about 24% by mass. The ingredient list should name betaine hydrochloride when that is the form in the drum. Structure/function claims are permitted with the DSHEA disclaimer and must not be disease claims. The FDA sets no federal maximum levels for lead, cadmium or mercury in dietary supplements; California Proposition 65 sets warning thresholds per day, and USP <2232> is a reference some buyers require. ## United Kingdom Great Britain applies the Food Supplements (England) Regulations 2003 and the equivalents in Scotland and Wales, with retained instruments on labelling, claims and contaminants. Northern Ireland follows the EU regime under the Windsor Framework, so one UK label may not work in all four nations. Betaine is not a vitamin or mineral under the GB supplement rules, so the same general-food-law reasoning applies. GB has its own novel-food and health-claims registers; the EU entry is a reference, not automatic GB permission. Check the GB claims entry before artwork sign-off. ## Contaminant limits Heavy-metal limits · catalog release limits and regulatory ceilings | Metal | Catalog limit | EU and GB supplements | US federal | Lead (Pb) | ≤3 mg/kg | 3.0 mg/kg | No maximum | Cadmium (Cd) | ≤1 mg/kg | 1.0 mg/kg | No maximum | Mercury (Hg) | ≤0.1 mg/kg | 0.10 mg/kg | No maximum | Arsenic (As) | ≤2 mg/kg | No harmonised EU/GB limit | No maximum The catalog limits are release limits; the EU figures are maxima under Regulation (EU) 2023/915, and GB applies the retained predecessor, Regulation (EC) 1881/2006. A catalog limit at or below the ceiling is a commercial choice, not a legal requirement; one above it would allow a failing lot to be released. Arsenic is where the columns diverge: no harmonised EU maximum, but a 2 mg/kg catalog limit. The comparison only works on the same basis. A result per kilogram of powder and a limit per daily dose are different numbers, and a multi-ingredient product dilutes the raw material's contribution. Ask for the result, method and basis, then calculate the daily intake. ## Label and claim boundaries Under Regulation (EC) No 1924/2006 and the claims list in Regulation (EU) No 432/2012, betaine has an authorised health claim with narrow conditions: a minimum amount per portion, a stated daily intake, and a warning above a set level. The wording and figures sit in the register; this page does not restate them. A label that uses the claim must meet every condition; a label that goes beyond it is not covered. GB keeps a register drawn from the same list, so check the GB entry before sign-off. In the US, a structure/function claim needs the DSHEA disclaimer and a scientific basis, and must not make a disease claim. The same discipline applies everywhere: describe the ingredient, amount and form, not an outcome. This page makes no function or disease claim for betaine. “Anhydrous” is a form description, not a claim, and “trimethylglycine” is another name for the same molecule. The label should use one name consistently rather than alternate between them. ## The file a brand should hold - Specification and current COA for the lot, with assay basis, water, pH, mesh and contaminants. - Technical data sheet and safety data sheet, with the form and CAS number on both. - Novel-food status statement for the EU/GB use, and the dietary-ingredient basis for the US. - Allergen, GMO, irradiation and animal-origin statements, signed and dated. - Certificate of origin, manufacturer name and plant, and lot traceability. - Heavy-metal and microbiological results with methods and limits. - Stability summary for the pack and the matrix; approved artwork checked against the certificate. ## A checklist before the first shipment - Does the specification name the form and CAS number? - Is the assay reported on the stated basis, with water beside it? - Do contaminant results meet the destination's limits on the same basis? - Is the novel-food or dietary-ingredient basis documented for the market? - Does the label name the form in the drum? - Is every claim on the artwork authorised, or absent? - Do lot codes match on COA, pack and packing list? - Are destination-specific documents signed and in date? The market frameworks are summarised on the EU, US and UK regulatory pages. The COA page breaks the certificate down line by line; the form and label choice is on the form comparison page; the tests behind the identity claim are on the identity page. The product page carries the catalog specification. ### 06 How we prove a betaine lot is the anhydrous form URL: https://nutrition.rainwoodbio.com/products/amino-acids/betaine/identity/ Reviewed: 2026-11-19 A betaine lot is the anhydrous form when four independent lines agree: the paper identity, the titration, the infrared spectrum and the water content. The assay alone cannot separate betaine from its hydrochloride, and it cannot see a dilution with a non-basic filler. The file should let a reviewer reach the same conclusion from the numbers and spectra, not the product name. In one lineIdentity is a set of agreeing lines — name, titration, IR and water — not a single assay figure. ## Four layers of identity What each identity layer proves, and what it cannot prove | Layer | What it proves | What it misses | Paper identity | Name, CAS number, formula, source | A wrong label on a correct-looking drum | Titration | Titratable betaine | Chloride, neutral diluents | Infrared spectrum | The molecular structure and the salt form | Mixture components below detection; quantity | Water and chloride | Anhydrous state; hydrochloride absent | Other diluents or counter-ions A certificate can pass the assay and still describe the hydrochloride, because the titration has no chloride channel. A certificate can pass the infrared check and still be wet. A certificate can pass all four and still be diluted with a neutral powder; that is why the specification needs a residue-on-ignition limit for inorganic diluents and, where the risk justifies it, a chromatographic screen for organic ones. ## The titration, and its equivalence factor The identity file uses the release titration, read for its equivalence factor rather than only the percentage. Each millilitre of 0.1 N perchloric acid corresponds to 11.72 mg of C5H11NO2 (117.15 g/mol). The report should give the sample mass, titrant concentration, blank and factor; with those, a second laboratory can reproduce the number. The calculation has two steps: the titrated mass is converted to betaine using the equivalence factor, then divided by the dry matter to put it on the anhydrous basis. A result calculated as-is against a 97.5–102.5% anhydrous window is not the same test. The titration measures the carboxylate, not the molecule. It counts any titratable species with a similar equivalent mass and does not see a neutral filler, which is why the file pairs it with IR and a water result. ## Infrared: the salt form shows Infrared spectroscopy reads the functional groups. Betaine anhydrous is an inner salt: the carboxylate is deprotonated, and the spectrum shows carboxylate absorption rather than a carboxylic-acid carbonyl. Betaine hydrochloride is the protonated acid with a chloride counter-ion, so the carbonyl region changes. A reference spectrum run on the same instrument and preparation is the comparison that matters. An IR match is an identity check, not a purity assay. It confirms that the solid is the anhydrous form and not the hydrochloride, and it can flag a different salt. It cannot tell a 98% powder from a 90% powder when the diluent is IR-transparent. The report should include the spectrum, reference and preparation, not only the word “conforms”. ## Water, and the anhydrous claim The catalog limit is ≤2.0% loss on drying, and the assay is reported on the anhydrous basis, so water is part of the identity file. A lot that passes the assay as-is but carries 3% water is not the anhydrous grade. The monohydrate is the clearest substitution: it carries about 13.3% water by mass (18.02 ÷ 135.17), far above the 2.0% limit. A monohydrate sold as anhydrous fails loss on drying even when the titration looks normal. Loss on drying and Karl Fischer answer different questions: loss on drying measures what leaves the sample under the stated conditions, including residual solvent; Karl Fischer measures water specifically. The certificate should name the method; for a hygroscopic powder, handling matters as much as the oven setting. ## Betaine to chloride: the form ratio Betaine anhydrous is an inner salt with no counter-ion; betaine hydrochloride is the 1:1 salt of the same molecule with hydrogen chloride. The ratio separates them. The hydrochloride has a molar mass of 153.61 g/mol, so chloride is 23.1% of the mass and betaine 76.3%; the betaine-to-chloride mass ratio is about 3.3:1. That gives a cross-check no single assay provides. An anhydrous lot at 97.5–102.5% assay should carry no chloride above the agreed limit; a hydrochloride lot at the same assay must carry about 23% chloride. ## XRD for betaine: form evidence, not release identity Betaine is crystalline, and the anhydrous form, the monohydrate and the hydrochloride each give their own diffraction pattern, so XRD can separate the three in the solid state. It is not the release identity test: IR, titration, chloride and loss on drying answer the same questions with simpler equipment, and a diffractogram proves nothing unless the reference pattern came from the same crystal form. Two limits matter. XRD sees crystalline phases only, so amorphous diluent and water are invisible, and the pattern of a mixture is read qualitatively rather than as a percentage. Use it when a form claim is disputed or a crystalline excipient is suspected; otherwise the release lines do the work. ## Adulteration routes and the tests that see them Betaine adulterants and the tests that separate them | Adulterant | What it changes | Test that sees it | Betaine hydrochloride | Chloride, acidic pH, lower betaine per gram | Chloride, pH, IR, assay factor | Choline chloride | Another quaternary ammonium salt | HPLC or ion chromatography, IR | Tetramethylammonium chloride | A smaller quaternary salt | Ion chromatography | Sucrose, dextrose, maltodextrin | Dilution, water, flow | HPLC, loss on drying | Sodium chloride | Dilution, chloride, ash | Chloride, residue on ignition | Betaine monohydrate | Water | Loss on drying (about 13.3%) | Other betaine salts | A different counter-ion | Ion chromatography, IR, titration The list covers the routes that appear in the market: the wrong salt, a substitute quaternary ammonium compound, a neutral diluent and the hydrated form. Each route has a different blind spot, which is why one test cannot close the file. ## How to write the specification - “Material: betaine anhydrous, CAS 107-43-7, C5H11NO2; the hydrochloride and the monohydrate are excluded.” - “Assay 97.5–102.5% by titration on the anhydrous basis; loss on drying ≤2.0%.” - “Identity by IR against a reference spectrum; chloride absent or below the agreed limit.” - “Residue on ignition ≤0.1%; pH 5.0–7.0 in 5% solution; ≥95% through 30 mesh.” - “Chromatographic purity screen where the risk justifies it; no added diluent.” The specification should name the form, the basis and the tests that exclude the other forms. “Betaine 98%” does none of those things: it does not say anhydrous, titration or which salt is excluded. ## Five questions for the supplier - Which form and CAS number does the certificate describe, and is the assay on the anhydrous basis? - What is the water result, and which method produced it? - Is chloride tested, and at what limit? - Can you send the IR spectrum and the reference it was compared with? - Which chromatographic screen covers other quaternary ammonium compounds and neutral diluents? Five direct answers, with documents, are worth more than a certificate that says “conforms” on every line. The COA page shows where each result sits on the certificate; the form comparison explains why the hydrochloride is a different ingredient; the anhydrous versus hydrochloride page covers dose and label. The product page carries the catalog specification, and the FTIR note explains the spectrum. ### 01 What the COA for L-isoleucine actually contains URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-isoleucine/coa/ Reviewed: 2026-11-19 An L-isoleucine certificate is short and predictable: appearance, identity by infrared and ninhydrin, assay by titration on the dried basis, specific rotation, loss on drying, residue on ignition, pH of a 5% solution, particle size, heavy metals and microbiology. Each line should name its method and release limit. The values here are the catalog specification; the batch COA confirms a particular drum. A titration of 99% says how much amino acid is present, not how its two stereocentres are arranged. In one lineThe titration measures how much amino acid is in the sample, not which isomer it is; assay, rotation, water and the allo check answer four different questions. ## The certificate as a test report Three columns make a certificate auditable: the parameter, the method that produced the number, and the release limit. Without the method a titration cannot be told from an HPLC result. Identity, assay and moisture · L-isoleucine | Parameter | Method | Release limit | Appearance | Visual | White crystalline powder | Identification | Infrared; ninhydrin reaction | Conforms | Assay (dried basis) | Non-aqueous titration | 98.5–101.5% | Specific rotation | Polarimetry, dried basis | +38.0° to +41.0° | Loss on drying | Gravimetric | ≤0.5% | Residue on ignition | Gravimetric | ≤0.1% | pH (5% solution) | Potentiometry | 5.5–6.5 Physical, contaminant and microbiological limits | Parameter | Method | Release limit | Particle size | Sieve analysis | ≥95% through 40 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent The first table answers whether the powder is isoleucine and dry; the second whether it is clean and fits the process. ## What the assay and the rotation actually measure The assay is a titration, not a chromatographic purity figure. An amino acid is a zwitterion; the standard non-aqueous method titrates its acid group with perchloric acid to a potentiometric endpoint, calculated against the dried material. The test is robust and blind to geometry: the L form, the D form and the allo epimer carry the same titratable group and molecular weight, so all three return the same percentage. An HPLC assay answers a different question: it separates the sample into peaks, so it can report related substances that the titration cannot see, and it can be written to resolve the allo epimer. The titration releases the lot; the chromatogram describes it. The dried basis is where the arithmetic lives. Water is measured separately as loss on drying (limit ≤0.5%) and the assay is reported as if the material were anhydrous. A lot at 99.0% on the dried basis with 0.4% water is 98.6% in the drum, so a purchase order written as-is and a certificate written on the dried basis can disagree. Specific rotation is the configuration test, and the number means nothing without its conditions. The catalog range is +38.0° to +41.0° on the dried basis; the same lot reads about +40° in 6 M hydrochloric acid and about +12° in water, so a rotation without solvent, concentration, temperature and path length cannot be reproduced. The polarimeter is weak against the allo epimer, which rotates in the same direction and a nearby range. The pH of a 5% solution, 5.5–6.5, sits around the isoelectric point. It is not an identity test or a purity figure; it is a check on crystallisation and washing. A reading outside the window points to residual acid or alkali, or to a salt. ## Release limit versus batch result A release limit is the boundary the lot had to meet; a batch result is what the laboratory measured. They belong in separate columns. A result column that repeats the specification range has published the gate, not the measurement. Not every line carries a trend. Residue on ignition at ≤0.1% is a ceiling on inorganic material; 0.02% and 0.09% both pass. The lines worth reading as numbers are the assay, the water, the rotation and the mesh. One line is absent from many certificates and belongs in the specification: the alloisoleucine figure. Neither titration nor polarimetry produces it. Where the risk assessment needs the number, add a chromatographic test with its own limit and limit of quantification. An empty cell is not a zero. ## What moves between batches Assay and water move with crystallisation and drying. A slow crystallisation gives a cleaner crystal and a rotation near the top of the range; a fast one can trap mother liquor, showing up as higher loss on drying and a drifting pH. Milling sets the mesh and changes bulk behaviour without touching the chemistry. Colour and flow are the qualitative lines. A cream tint can come from a hot drying step or a trace of iron while the assay stays at 99%; a powder that cakes in the bag points at water and the seam. Neither is a release failure on its own. The alloisoleucine content, where it is measured, moves with the route. Material recovered from acid hydrolysis carries more of the epimer than fermentation material, because the C-3 centre can invert under strong acid and heat. That is a process question, and a trend across lots says more than one result at the limit. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a stereochemistry claim the certificate cannot support, or a disputed result. The panel is targeted: a chiral separation for the allo epimer and the D form, ICP-MS for the metals, and a plate count. The separation needs care. Isoleucine and alloisoleucine are diastereomers, so they can be resolved by derivatisation with a chiral reagent such as Marfey's reagent followed by a reversed-phase column, on a chiral stationary phase, or on an amino-acid analyser. Ask for the resolution between the peaks and the limit of quantification, not only a pass line. A report that says “alloisoleucine: not detected” without a limit describes the method, not the sample. Chain of custody decides whether the test means anything. The sample tested should be the retained sample from the lot on the certificate, and the lot code should appear on all three documents. ## What to compare between suppliers Six lines side by side separate two quotations that look alike: the assay and its basis; the rotation with solvent and concentration; the water limit and result; the mesh; the alloisoleucine figure and method; and the metals and micro panel. Agreement on the assay alone says little. The second layer is traceability. The lot code should match on the certificate, the pack and the retained sample, and the certificate should say who manufactured the lot and by which route. A correct certificate can still belong to another drum. The catalog specification sits on the L-isoleucine product page. The grade choice is set out on the grade page and the epimer comparison on the isoleucine versus alloisoleucine page; the tests that separate the L form are on the identity page; the release workflow is on the quality page. The chromatographic method is described in the HPLC note, and loss on drying is defined in the glossary. ### 02 L-isoleucine or L-alloisoleucine: choosing a grade URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-isoleucine/grades/ Reviewed: 2026-11-19 L-isoleucine and L-alloisoleucine share a formula, a molecular weight and a titration response; they differ at one carbon. Only L-isoleucine has an established place in a food supplement, and inside that material the grade decision is mesh, granulation and whether the amino acid ships alone or inside a blend. The label follows the molecule, not the mesh. In one lineThe epimers differ at one carbon and in everything the label touches: the rotation, the assay basis, the permitted use and the ingredient name. ## Why the form is the grade “Grade” is used loosely in amino acid buying, and it covers four separate decisions. The first is the molecule: L-isoleucine or L-alloisoleucine, the C-3 epimer. The second is the particle: the catalog standard is a crystalline powder with ≥95% through 40 mesh. The third is granulation, available on request for flow. The fourth is the blend: a single amino acid, or one component of a branched-chain mix. The first decision is not a grade at all. Two materials can both assay at 99.5% on the dried basis and still be different compounds, because the titration counts acid groups and both epimers have one. The second and third decisions change how the powder runs through a filling machine. They do not change what the label may say. A grade change is a specification change. If the certificate says 40 mesh and the order asks for 80, the certificate belongs to a different lot; if the specification says L-isoleucine and the drum holds the allo epimer, the specification and the label are both wrong. Keep the molecule, the mesh and the blend as three separate lines on the purchase order. ## The grades side by side Isoleucine grades and what each one is for | Grade | What it is | Where it fits | Label name | L-isoleucine, 40 mesh | Crystalline powder, ≥95% through 40 mesh | Capsules, tablets, dry blends | L-isoleucine | L-isoleucine, 80 mesh | Milled finer, quoted on request | Blends that need uniformity, suspensions | L-isoleucine | L-isoleucine, granulated | Agglomerated for flow, quoted on request | High-speed tableting, dust control | L-isoleucine | Isoleucine in a blend | Fixed ratio with leucine and valine | Premix, stick pack, capsule blend | The blend and each amino acid | L-alloisoleucine | The C-3 epimer, reference grade | Analytical standard, method work | Not a supplement ingredient The first three rows change the powder, the fourth changes the formula, and the last changes the chemistry and the permission. A quotation that says only “isoleucine 99%” has not told you which row it is quoting. ## Particle size, flow and the powder Mesh is a sieve number, not a particle dimension. A 40-mesh sieve has openings of about 420 µm and an 80-mesh sieve about 177 µm, so “≥95% through 40 mesh” means at most 5% is retained on that screen. The top of the distribution is controlled; the fines below it are not, and fines are what dust, segregate and bridge in a hopper. Milling to 80 mesh buys blend uniformity in a low-dose premix and trades away flow. The finer powder aerates, packs on the hopper wall and can hold more surface water, which shows up as caking before the assay moves. Granulation reverses the trade: it builds agglomerates that flow and compress, and it slows the time the powder takes to disperse in water. Bulk density and flow belong on the technical data sheet for the grade being quoted. They are lot properties, not constants, and a capsule filler set up on one lot will not necessarily run at the same speed on the next. ## What fits the dosage form A capsule or tablet is the simplest home. The powder is dry, the dose is weighed, and solubility never enters the calculation. The 40-mesh grade fills a standard shell; the granulated grade helps a high-speed press hold weight and reduces the dust in the room. A stick pack or a drink mix brings solubility into the decision. L-isoleucine dissolves to about 34–41 g/L at 25 °C, so 100 mL of water carries roughly 3.4–4 g at the ceiling; a larger dose needs a larger volume or a suspension. Isoleucine also tastes bitter, so a drink mix usually needs a flavour system that covers it. A ready-to-drink product adds pH and heat. Solubility rises in dilute acid and in alkali, and the pH of the finished drink is a formulation choice; a hot fill then gives the amino acid more opportunity to react with any reducing sugar in the formula. Test the finished matrix, not only water. A blend is a formula decision, not a grade of isoleucine. In a 2:1:1 leucine : isoleucine : valine premix, the ratio is declared per amino acid and the isoleucine assay does not set it. A single-amino-acid panel and a blend panel are different labels. ## What changes when you switch A switch between L-isoleucine grades keeps the name, the CAS number and the label, and moves the physical clauses: mesh, bulk density, flow, dispersion time and the water limit that the finer powder needs. The assay basis and the rotation stay as they were, because the molecule has not changed. A switch to L-alloisoleucine moves everything else: the CAS number, the rotation, the specification, the regulatory position and the label. That switch is not a grade change, and it should never be made to solve a flow problem. - Mesh and granulation: the certificate, the technical data sheet and the filling trial move together. - Blend: the ratio, the other two assays and the label declaration are new work. - Epimer: a new molecule with a new identity test, a new rotation range and no automatic food use. - Water and flow: the finer or granulated grade may need its own stability and caking data. ## When not to switch Do not switch to L-alloisoleucine, D-isoleucine or a DL mixture for a food or supplement product. None of them carries the established use of L-isoleucine, and a certificate for one does not release another. If a supplier offers “isoleucine” without naming the stereochemistry, mark the quotation incomplete. Do not mill finer than the process needs. An 80-mesh powder in a capsule line that already runs well adds dust, cleaning time and caking risk for no gain. Do not granulate a product that has to disperse quickly in a stick pack, and do not accept a blend where the panel declares a single amino acid. The epimer comparison is carried further on the L-isoleucine versus L-alloisoleucine page. The release tests for each grade are on the COA page, the powder and solution behaviour on the stability page, and the market position on the compliance page. The product hub carries the catalog specification, the packs and minimum on the MOQ page, and particle size is defined in the glossary. ### 03 L-isoleucine is stable dry; moisture and the matrix decide the rest URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-isoleucine/stability/ Reviewed: 2026-11-19 The dry crystalline powder is the stable form of L-isoleucine: a sealed pack at room temperature keeps its assay, its rotation and its mesh for years. What fails is the pack and the matrix. Water gets in, the powder cakes and loses flow; heat meets a reducing sugar in a wet formula and the colour moves; a pH extreme held at temperature is the only realistic route to a change in configuration. Alloisoleucine is a process artefact upstream, not something a warehouse makes. In one lineA sealed pack protects the powder; water, heat with a reducing sugar and a pH extreme are what move the assay, the colour and the flow. ## Water is the routine failure Isoleucine does not pull water out of the air the way a salt does, so a sealed pouch is a good barrier for a long time. The release line is ≤0.5% loss on drying, and that number is a flow specification as much as a chemical one: water sits on the surface of the crystals, bridges them, and turns a powder that should pour into one that has to be broken up. A cake has three usual causes. The seam was folded rather than heat-sealed; the pack crossed a temperature cycle that condensed water on the inside of the foil; or the stack was warm and heavy enough to press the powder into a block. Lumps that crumble under light finger pressure point at surface water and a marginal pack. A hard block is a failed pack, and the lot should be held rather than knocked loose and used. The 1 kg pouch and the 25 kg drum both rely on an inner liner. The drum wall is a shipping shell; the liner is the barrier. Once a drum is open, the liner must be closed and the date written on the label, or the remainder stops being a controlled pack. ## The solubility ceiling Water holds about 34–41 g of L-isoleucine per litre at 25 °C, depending on the method used to measure it. That puts the ceiling for a 100 mL stick pack at roughly 3.4–4 g, and a 5 g dose needs about 150 mL or a suspension. The pH of a 5% solution, 5.5–6.5, sits around the isoelectric point of 6.02, which is exactly where solubility is lowest. Moving the pH away from the isoelectric point raises the ceiling, so a mildly acidic or mildly alkaline drink can carry more than a neutral one. The trade is taste and, at the alkaline end, a faster colour change in the finished product. Test the range, not only the target pH. Heat is the second lever. The free α-amino group reacts with reducing sugars in a wet formula, and the browning shows before any assay change; a hot fill and a sweetened matrix are the combination to watch. Light matters less here, because isoleucine has no chromophore to absorb it, so the colour risk comes from the matrix rather than from photolysis. ## What moves the shelf life Failure modes and the control for each · L-isoleucine | Factor | Effect | Where it shows | Control | Humidity | Caking, flow loss, rising water | Loss on drying, sieve test, bench observation | Sealed liner, desiccant in a humid destination | Temperature cycling | Condensation inside the pack | Local caking, seam staining | Stable storage, pallet limits | Heat in solution | Browning with a reducing sugar | Colour, taste | Lower process temperature, shorter hold | pH extreme with heat | Configuration risk, colour | Rotation, appearance | Buffer to target, validate the process window | Trace metals | Colour in the finished matrix | Appearance | Chelator, metal limits on the specification | Compression | Hard cakes in the drum | Drum inspection on receipt | Pallet height, liner discipline ## Designing the stability panel Build the panel from the failure modes rather than copying a generic list. For the powder, appearance, assay, rotation, loss on drying, pH and mesh cover the chemistry and the physics; a microbiological check covers the pack; and the alloisoleucine figure belongs in the panel wherever the specification carries it, because a change in configuration is the one degradation route an assay cannot see. For timing, 25 °C/60% relative humidity is the long-term arm and 40 °C/75% is the accelerated one, with points at 0, 3, 6, 9, 12, 18 and 24 months long-term and 0, 1, 2, 3 and 6 months accelerated. Add a shipping cycle where the destination is hot or the pack is small, and a photo-stability arm only if the finished pack is transparent. The finished product needs its own panel. A stick pack is tested with the water a consumer would add; a beverage is tested to the end of its declared life; a capsule is tested for fill weight, disintegration and the water the shell picks up. Solubility, taste and colour move in the matrix, and none of them appears on the powder's certificate. ## Four matrices, four answers A capsule or tablet is the least demanding: dry powder, dry excipients, and the practical risks are flow, fill weight and a humid filling room. The 40-mesh grade is the standard fill, and a granulated grade helps when a press needs more flow. A powder stick stays dry until it is used, so the solubility ceiling arrives at the point of use. Either size the stick for the volume that can hold the dose, or accept a dispersion and say so; the bitter taste needs a flavour system either way. A ready-to-drink product adds a heat process and a shelf life. An acidic base widens the solubility window, and the process temperature decides how much browning the sugar and the amino group produce. Set the window with a trial, not from the powder data. A blend brings the other two branched-chain amino acids and their behaviour. Leucine and valine have their own taste and solubility, and a mixed powder can segregate in the bag, which puts more fines at the surface and more water pickup there. Test the blend as a blend. ## Retest period, shelf life and the pack Two numbers are often confused. A retest period belongs to the raw material in a named pack and says how long the lot can be held before it must be re-tested. A shelf life belongs to the finished product. Neither comes from the release certificate; both come from data on the pack and the matrix that will actually be used. A sealed pouch or drum can support a multi-year retest period. An opened pack cannot, and the handling instruction should give it a use-up window. Write the storage statement to match the data — cool, dry, sealed, away from strong odours — and avoid a specific temperature that the data does not support. The release tests are on the COA page, the grade choice on the grade page and the epimer comparison on the isoleucine versus alloisoleucine page. The packs and minimum are on the MOQ page, the product hub carries the catalog specification, and loss on drying is defined in the glossary. ### 04 L-Isoleucine: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-isoleucine/moq/ Reviewed: 2026-11-19 L-isoleucine is stocked in a 1 kg foil pouch and a 25 kg fiber drum, and a released lot ships on a 1–7 day lead time once the specification and the purchase order agree. Four details shape the order: the mesh, the pack, the document set and the destination. In one lineOne kilogram is the smallest pack that still carries a lot number; the mesh, the pack and the destination market set the rest of the order. ## Why one kilogram The 1 kg pouch exists because a lot number has to survive the journey. A trial batch, a second run after the formula moves, and the sample a buyer keeps for the life of the project all need to trace back to the same release. A smaller quantity cannot carry that chain, because splitting a pouch breaks the seal and the label with it. Read the minimum as a unit of control rather than a threshold to negotiate. If a trial needs 300 g, the answer is a sample drawn from a released lot, not a third of a pouch. If production needs 30 kg, the answer is a drum plus pouches, and the drum brings its own liner and freight profile. ## The two packs Standard packs and the barrier each one provides | Pack | Net weight | Barrier | Where it goes | Foil pouch | 1 kg | Foil laminate, heat-sealed seams | Trial batch, retained sample, small run | Fiber drum | 25 kg | Food-grade inner liner inside a fibre shell | Full-scale production In both packs the liner does the work. A drum whose liner has been rolled shut is not sealed, and a pouch whose top has been folded is an open pack. A desiccant helps in a humid destination; it cannot replace a seam. Every pack label carries the product, the form, the lot, the net weight and the pack date. The lot string is the link to the certificate, and a single wrong character means the pack and the paperwork describe different material. Standard sizes ship from stock; split drums and larger bags are quoted. Isoleucine is not a dangerous good, so the pack is designed for moisture and handling rather than for transport class. Write the opening date on the label when a drum is first opened and close the liner afterwards: an opened drum is no longer a controlled pack. ## Lead time The 1–7 day figure runs from a fixed specification and a confirmed order. Before that point the clock has not started: an enquiry is a question, and a purchase order that cites an older specification restarts the queue at the specification step. The 40-mesh stock grade moves first. Milling to 80 mesh, granulation and any non-standard pack are scheduled on the line, so they add days rather than hours. Documents travel with the goods and can hold them: a certificate of origin, a local-language safety data sheet or a third-party report has to be ready before dispatch, and a holiday week in the shipping country adds a week in practice. ## Six answers a quotation must give Two offers can both say “isoleucine 99%” and describe different orders. The comparison works only when each one answers the same six questions. - Which form and which mesh: L-isoleucine 40 mesh, 80 mesh, granulated, or a component of a blend. - Which specification and version: titration on the dried basis, rotation with its solvent, water, pH, mesh, metals and microbiology. - Which pack count: pouches, drums or both, and whether a desiccant is specified. - Which delivery term and destination, so that freight and documents sit on one basis. - Which documents: COA, TDS, SDS, origin, allergen and GMO statements, and the manufacturing route. - Which extra test or sample: an allo-epimer check, a third-party metal panel, or material for the buyer's own laboratory. ## Samples A sample should be a small quantity from the lot that will ship, drawn before the pack is sealed, with the same lot code on the bag and the certificate. Material scooped from an already opened drum is a different proposition: it has met air, and its history is not written down. Order for the trial plus a retained portion. The bench test covers flow, dispersion, colour against the previous lot and caking after a week in the room. For a stick pack, check how 3 g behaves in 100 mL, because that is close to the solubility ceiling. ## What the terms leave out Payment terms, delivery term, validity and the document list are commercial and belong in the offer. This page covers the minimum, the packs and the lead time. Each line of a mixed order is quoted separately, because a pouch and a drum are different lines with different handling. Three clauses belong in the purchase order. The specification version governs release, so a different mesh or water limit needs a fresh version and a fresh quotation. The lot code ties the certificate, the pack and the invoice together. And the form is named in full, so that L-alloisoleucine, D-isoleucine or a DL mixture cannot be delivered against a line for L-isoleucine. Moisture behaviour after delivery is followed through on the stability page; the release tests are on the COA page; the market requirements are on the compliance page. The grades sit side by side on the grade page, the product hub carries the catalog specification, and MOQ and lead time are defined in the glossary. ### 05 Where L-isoleucine is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-isoleucine/compliance/ Reviewed: 2026-11-19 Three markets, three mechanisms. The EU has no positive-list entry for amino acids, so L-isoleucine falls under general food law; the US classifies it as a dietary ingredient under DSHEA; the UK works from retained EU rules. A supplier certificate supports the file in all three, but permission, contaminant ceiling, label and claim each need their own evidence. In one lineAmino acids sit outside the EU's Annex II positive list, so the file rests on general food law, a pre-1994 US marketing basis and retained UK rules. ## Four questions, one file A compliance file is tested four times: can the ingredient be sold here, does the finished product stay inside the contaminant limits, does the label name it correctly, and is any claim authorised and substantiated. A batch certificate helps with all four and settles none of them. Responsibility sits with the operator that places the product on the market, and these notes are a sourcing reference rather than legal advice. ## European Union Directive 2002/46/EC harmonises food supplements, and Annex II lists the vitamin and mineral substances that may be used, with their forms. Amino acids are absent. L-isoleucine therefore has no positive-list entry and sits under general food law, Regulation (EC) No 178/2002, plus national rules. The pre-1997 history matters for the novel food question. L-isoleucine was a food constituent before 15 May 1997 and is not regarded as novel on that basis, but check the Catalogue entry for the form and route, since a new route raises a separate question. No harmonised maximum level applies. Labelling follows Regulation (EU) No 1169/2011 with the supplement particulars from Directive 2002/46/EC. The epimer is not a grade of the same substance. L-alloisoleucine has no established food use and would need its own safety and market-entry position before a supplement could contain it. ## United States DSHEA names amino acids among the categories that qualify as a dietary ingredient, so L-isoleucine can be sold where the supplier supports the basis: an NDI notification, a GRAS conclusion, or evidence of US marketing before 15 October 1994. Manufacturing runs under the cGMP in 21 CFR 111 and the panel follows 21 CFR 101.36. Where no Daily Value is set for the amino acid, the panel gives the amount per serving without a percentage; confirm the current format before the artwork is signed. The FDA does not approve a supplement or label before sale, so the file is the evidence. Structure/function claims are permitted when truthful, not misleading and substantiated, with the DSHEA disclaimer and FDA notification within 30 days of first marketing; a disease claim is not. California's Proposition 65 adds a lead-exposure calculation that starts from the daily dose. ## Contaminant limits Metal limits for a supplement, by market | Metal | EU · Regulation (EU) 2023/915 | US federal | UK retained limits | Lead | 3.0 mg/kg in food supplements | No numeric federal limit; 21 CFR 111 cGMP | 3.0 mg/kg | Cadmium | 1.0 mg/kg; 3.0 mg/kg for seaweed-based supplements | No numeric federal limit; 21 CFR 111 cGMP | 1.0 mg/kg | Mercury | 0.10 mg/kg | No numeric federal limit; 21 CFR 111 cGMP | 0.10 mg/kg | Arsenic | No harmonised limit for supplements; the buyer sets one | No numeric federal limit; 21 CFR 111 cGMP | No harmonised limit; the buyer sets one The EU and UK figures apply to the food as sold, not to the drum, so a raw-material limit is a purchasing decision and leaves room for method uncertainty, other ingredients and the finished-product test. The US federal position sets no numeric ceiling, so a buyer writes a lead limit and works the Proposition 65 exposure from the dose. The catalog limits for L-isoleucine are Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg. Lead, cadmium and mercury sit at or below the EU and UK ceilings. Arsenic is a buyer-set limit in both regimes, so the 2 mg/kg figure on the specification is a purchasing choice rather than a legal requirement. ## The claim boundary In the EU and the UK an authorised claim has to appear in the Register, and Regulation (EC) No 1924/2006 requires it to be truthful, clear and substantiated. As of this review the EU Register carries no authorised claim for L-isoleucine as such, so no body-function claim should be attached unless a current entry is found. Protein claims are the usual trap. A claim about protein describes a food that is a source of protein; it does not transfer to a free amino acid that happens to be a protein component. An amino acid content statement is a composition statement, and it still has to be accurate. In the US the route is a structure/function claim with the disclaimer and the notification; a disease claim is outside it. The GB Register is the UK reference. In all three markets the claim must describe the product rather than a disease, and the evidence has to sit in the file. The panel names the ingredient rather than the category. “L-isoleucine” belongs on the label with the amount per serving, on the same basis as the certificate; a blend declares its ratio and still names the amino acid. A drum of the epimer cannot be declared as L-isoleucine, and a DL mixture has to say on the panel that it is DL. ## The document file Documents to hold for an L-isoleucine lot | Document | What it answers | Market | Batch certificate of analysis | Released against the agreed limits, with method and result | All | Specification | Limits, methods, dried basis, mesh and version | All | Technical data sheet | Solubility, mesh, flow, handling and pack | All | Safety data sheet | Hazard and handling information | All | Allergen and GMO statements | Declarations for the panel and the file | EU, UK, US | Market-entry statement | Novel food, NDI or pre-1994 position for the form | EU, UK, US | Origin and route statement | Traceability and the fermentation or hydrolysis route | All | Metals and micro reports | The contaminant and hygiene envelope | All ## The checklist - Name the form and match CAS 73-32-5; the epimer and the DL mixture are different substances. - Confirm the market-entry position for that form, including Member State rules and the GB Register. - Set raw-material limits below the finished-product ceiling, and set an arsenic limit because neither the EU nor the UK does. - Work the daily dose through the contaminant figures and, for the US, through Proposition 65. - Match the label name and amount to the certificate and the purchase order on the same basis. - Test every claim against the Register or the DSHEA route and keep the substantiation. - File the documents against the lot number rather than the product name. - Ask for the manufacturing route and the animal-derived input statement, since fermentation and hydrolysis carry different declarations. Tie the file to the lot: the tests on the COA page, the form on the grade page and the epimer page, the proof on the identity page. The product hub holds the catalog specification, the quality page the release workflow; the ICP-MS note explains the metals, and heavy metals is in the glossary. ### 06 How we prove an L-isoleucine lot is the L form URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-isoleucine/identity/ Reviewed: 2026-11-19 Identity for L-isoleucine is built from four separate answers, not one: who made the lot and what the record says, which molecule the instrument sees, which configuration the polarimeter reports, and whether the powder meets the physical specification. The assay cannot carry that load alone. A titration at 99% is equally consistent with the L form, the allo epimer, a DL mixture, leucine, norleucine or a powder cut with a diluent. In one lineThe titration counts acid groups, the rotation fixes the sign of the configuration, and only a separation that resolves the allo epimer can say how much of it is present. ## Four layers of identity Move from the paperwork to the instrument, then to the geometry, then to the powder. Each layer closes a gap the previous one leaves open. Identity layers for L-isoleucine and the gap in each | Layer | Question it settles | Evidence | Blind spot | Record | What the lot claims to be | Name, CAS 73-32-5, lot code, manufacturer | Says nothing about the drum | Substance | Whether the sample is an isoleucine-type amino acid | Infrared, ninhydrin, retention time | Cannot see C-2 or C-3 geometry | Configuration | Whether the L form is present and in what proportion | Specific rotation; chiral separation | Small D excess; small allo fraction | Form and purity | Whether the powder is the specified grade | Assay, water, residue, pH, mesh | Nothing about configuration Read the table from the bottom and the weakness is obvious: the tests that are easiest to run are the ones that say least about which molecule is in the drum. ## Rotation and the L configuration A polarimeter returns an observed angle. Dividing that angle by the path length in decimetres and by the concentration in grams per millilitre gives the specific rotation, which can be compared with the pure material. The catalog window is +38.0° to +41.0° on the dried basis, and the figure is only reproducible when the solvent, concentration, temperature and cell length travel with it: the same lot reads about +40° in 6 M hydrochloric acid and about +12° in water. The sign is the coarse check. L-isoleucine is positive; D-isoleucine is negative; a racemate falls near zero. An achiral filler such as norleucine also drags the reading toward zero, because it has no optical activity to contribute. A lot outside the window has a real problem. The allo epimer is where the coarse check runs out. L-alloisoleucine has the same sign and a neighbouring range, so a mixture can land inside +38.0° to +41.0° and still contain several per cent of it. Rotation is a gate on the bulk configuration, not a purity figure for the epimer; the epimer needs a separation. ## The solid state, IR, XRD and pH Infrared spectroscopy identifies the functional groups — carboxylate, ammonium, the branched side chain — and separates an amino acid from a salt, an ester, a blend or a completely different molecule. Ninhydrin confirms the free α-amino group by colour. Both tests pass for L-isoleucine and for L-alloisoleucine, because the functional groups are the same. X-ray diffraction reads the lattice instead of the groups. The two epimers crystallise into different patterns, so a diffractogram can confirm that a milled or granulated lot is the same solid form as the reference and can flag a mismatch. It is not a quantitative stereochemistry test: a reference pattern can coexist with a small amount of the other epimer. Solution pH, 5.5–6.5 at 5% concentration, checks the salt form and residual acid or alkali rather than the configuration; the isoelectric point is 6.02. Particle size completes the physical picture: ≥95% through 40 mesh is the standard, and a milled or granulated lot states its mesh in the specification. ## The substitution routes Substitution routes and the test that separates them | Route | What the paperwork would show | Test that separates it | L-alloisoleucine | Same formula, mass and titration; rotation in range | Chiral separation against an allo standard | D-isoleucine or a DL mixture | Titration unchanged; rotation low or near zero | Specific rotation; chiral separation | Leucine or norleucine | Same formula and mass; leucine rotates much less, norleucine not at all | Validated retention plus rotation | Salt or diluted powder | Assay low, residue high, pH moved | Residue on ignition, pH, assay The first three routes share the molecular mass, so a mass-spectrometric check that only confirms 131.17 has confirmed very little. Leucine is a constitutional isomer of isoleucine with the same C6H13NO2 formula, and norleucine is another; both have a history of use as nitrogen-rich fillers, and both need a method that resolves them from isoleucine. A retention time is not evidence unless the method has been shown to separate the set. The crude route is the one the certificate catches. A residue on ignition above 0.1%, a pH outside 5.5–6.5 or an assay under 98.5% points to material other than the free amino acid, before any chiral question is asked. ## A specification line that can be enforced One sentence can fix the molecule, the geometry and the basis: “L-isoleucine, CAS 73-32-5, 98.5–101.5% on the dried basis by titration; specific rotation +38.0° to +41.0° on the dried basis, with the solvent and concentration stated on the certificate; identification by infrared and ninhydrin conforms; loss on drying ≤0.5%; residue on ignition ≤0.1%; pH (5% solution) 5.5–6.5; particle size ≥95% through 40 mesh; heavy metals Pb ≤3, As ≤2, Cd ≤1, Hg ≤0.1 mg/kg; APC ≤1,000 cfu/g, yeast and mould ≤100 cfu/g, E. coli and Salmonella absent.” Three clauses do the work. The name excludes the epimer and the DL mixture; the dried basis prevents a silent water correction; the solvent beside the rotation makes the value comparable. The catalog does not carry an alloisoleucine limit, so a buyer who needs one adds a clause: alloisoleucine ≤1.0% by a named chiral method, with the limit of quantification written next to it. Agree that number against real lots before it becomes a release limit. ## Five questions to put to a supplier - Does the certificate and the pack name L-isoleucine, and does the specification carry CAS 73-32-5? - What rotation did this lot give, with which solvent, concentration, temperature and basis? - Was the lot tested for alloisoleucine, by which method, with what result and what limit of quantification? - What method and standard produced the assay, and is the result on the dried material? What are the water, residue and pH? - Can you send the infrared spectrum, the other-amino-acid profile and the metals and micro results for this lot? Five answers of that kind describe a material rather than a drum. The certificate that should carry them is set out on the COA page; the forms are compared on the grade page and on the L-isoleucine versus L-alloisoleucine page. The product hub carries the catalog specification, the separation is described in the HPLC method note, and assay is defined in the glossary. ### 02.1 L-isoleucine vs L-alloisoleucine: rotation, regulation and the label URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-isoleucine/grades/isoleucine-vs-alloisoleucine/ Reviewed: 2026-11-19 L-isoleucine and L-alloisoleucine are diastereomers: the same C6H13NO2 formula, the same 131.17 g/mol, and one configuration difference at C-3. That single difference changes the rotation, the crystal and the regulatory position; it does not change the titration. Only L-isoleucine has an established supplement use, and the epimer is a reference material and a process marker rather than an alternative grade. In one lineThe two epimers differ at one carbon, overlap in rotation and titrate identically, so the specification, the chromatogram and the label have to do the work. ## Two stereocentres, four isomers Isoleucine has two stereocentres, at C-2 and at C-3, so four configurations exist. L-isoleucine is (2S,3S) and L-alloisoleucine is (2S,3R); the two D forms mirror them. The L pair shares the C-2 configuration and differs at C-3, which makes them diastereomers rather than enantiomers. Diastereomers have different physical properties, which is why the rotation, the melting point and the crystal form can separate them even though the mass cannot. L-isoleucine and L-alloisoleucine · the properties that differ | Property | L-isoleucine | L-alloisoleucine | CAS number | 73-32-5 | 1509-34-8 | Configuration | (2S,3S)-2-amino-3-methylpentanoic acid | (2S,3R)-2-amino-3-methylpentanoic acid | Formula and molecular weight | C6H13NO2 · 131.17 g/mol | C6H13NO2 · 131.17 g/mol | Specific rotation | +38.0° to +41.0° (catalog, dried basis) | About +35° to +39° (c=4, 6 M HCl, supplier data) | Melting point with decomposition | About 284 °C | About 272 °C | Established supplement use | Yes, as an amino acid ingredient | No; reference and research use The epimer is not a synthetic curiosity. The C-3 centre can invert under strong acid and heat, so alloisoleucine appears as an artefact when proteins are hydrolysed in hydrochloric acid, and it occurs in a small number of natural peptides. A supplier whose route includes a hydrolysis step has a reason to watch the figure; a crystallisation route has less of one. ## Rotation: close enough to overlap The polarimeter is the first test anyone reaches for, and it is stronger on paper than in practice. The catalog window for L-isoleucine is +38.0° to +41.0° on the dried basis. L-alloisoleucine reads roughly +35° to +39° in the same acid solvent, so the two windows overlap in their upper and lower thirds. The arithmetic shows the problem. Take a lot that is 95% L-isoleucine reading +40° and 5% alloisoleucine reading +37°: the mixture reads about +39.8°, comfortably inside the window. At 10% alloisoleucine it still reads about +39.6°. The rotation moves in the right direction, but a release limit of +38.0° does not exclude the epimer at a level that matters to a specification. What rotation does catch is the gross failure. D-isoleucine reads negative, DL-isoleucine sits near zero, and an achiral filler such as norleucine dilutes the reading toward zero. A lot outside the window has a real problem; a lot inside it has only passed one gate. ## Assay: the same number for both The release assay in this catalog is a titration, and both epimers carry the same carboxyl group. At the same mass, they consume the same titrant, so a certificate can report 100.0% on the dried basis for either one, and for any mixture of the two. The assay is a mass-balance test, not a stereochemical one. Chromatography without a chiral dimension does not settle it either. On a conventional reversed-phase method the pair can be poorly resolved or co-elute, and an ultraviolet detector sees very little because isoleucine has no chromophore; most methods derivative the amino acid or use a refractive-index or evaporative detector. Mass spectrometry separates by mass, and the two masses are identical. Only a method that resolves the geometry produces a number for the epimer. ## The separation that produces a number Three routes are routine. Derivatisation with a chiral reagent such as Marfey's reagent turns the mixture into derivatives that separate on a reversed-phase column; a chiral stationary phase separates the underivatised amino acids; and an amino-acid analyser with ninhydrin resolves the pair on ion exchange. All three need an alloisoleucine standard, because a peak is not identified by its position alone. The report should give the resolution between the isoleucine and alloisoleucine peaks, the limit of quantification and the recovery from a spiked sample. A method with a limit of quantification at 0.5% cannot support a specification of ≤0.1%. Ask for the validation, not only the result, and ask which sample was tested: the retained sample from the lot is the one that counts. ## Regulation and the label The two names are not interchangeable in a file. In the EU, amino acids sit outside the Annex II positive list, so L-isoleucine falls under general food law, with the labelling rules of Regulation (EU) No 1169/2011 and the supplement particulars of Directive 2002/46/EC. L-alloisoleucine has no established food use, so it would need its own safety and market-entry position before it could appear in a supplement; a position that covers L-isoleucine does not extend to it. In the US, an amino acid can be a dietary ingredient under DSHEA if the supplier supports the basis, and the Supplement Facts panel must name the ingredient. L-alloisoleucine does not inherit that basis. In the UK the retained rules apply. In all three markets the label test is the same: the name on the panel must be the substance in the drum, and a certificate for the epimer cannot release a lot declared as L-isoleucine. A blend label declares the amino acids it contains, so a 2:1:1 leucine : isoleucine : valine premix has to name all three. The ratio belongs to the formula; the epimer question belongs to the isoleucine line, and the two are checked separately. ## When to choose which Choose L-isoleucine for capsules, tablets, powder sticks, beverages and blends, and for any product that will carry a food or supplement label. The material is specified at 98.5–101.5% on the dried basis with a rotation of +38.0° to +41.0°, and the certificate should add an alloisoleucine figure where the risk assessment asks for one. Choose L-alloisoleucine only as an analytical reference standard, a spiking material for method validation, or a research reagent, and handle it with its own specification and its own documentation. It is not a substitute for isoleucine, and a quotation that offers it as one is a warning about the supplier. If a supplier cannot say which epimer the drum contains, the question to ask is about the chromatogram. The identity page sets out the four-layer proof; the release tests are on the COA page, the grade portfolio on the grade page, and the market position on the compliance page. The product hub carries the catalog specification, and assay is defined in the glossary. ### 01 What the COA for L-leucine actually contains URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-leucine/coa/ Reviewed: 2026-11-19 A leucine certificate is a chain of evidence, not a single number. It should identify the material, give the assay and the basis it was calculated on, state the rotation and its conditions, and show the physical and contaminant tests that decide whether the lot can be used. The limits below are the catalog specification; the lot COA is the document that ties one drum to those limits. In one lineThe assay tells you how much leucine is in the drum; the basis and the rotation tell you what that number means. ## The certificate as a line-by-line report The first test of a certificate is whether a stranger could repeat the release decision from it. Parameter, method, limit and result should line up, and the method should be specific enough to mean something. A sheet that prints “conforms” for identification without naming the test has kept the conclusion and discarded the evidence. Identity, assay and moisture · L-leucine | Parameter | Method | Release limit | Appearance | Visual | White crystalline powder | Identification | IR and ninhydrin reaction | Conforms to reference | Assay (dried basis) | Titration | 98.5–101.5% | Specific rotation (dried basis) | Polarimetry | +14.9° to +17.3° | Loss on drying | Gravimetric | ≤0.5% | Residue on ignition | Gravimetric | ≤0.1% | pH (5% solution) | Potentiometry | 5.5–6.5 Physical, contaminant and microbiological limits | Parameter | Method | Release limit | Particle size | Sieve analysis | ≥95% through 40 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent ## Titration, HPLC and the dried basis Leucine has one amino group and one carboxyl group, so an acid–base titration sees a single basic centre per molecule. That is why the method is precise, and also why it is not selective. Isoleucine and norleucine are isomers with the same formula, valine is one methylene shorter, and each molecule carries one amino group. The titration responds to all of them and cannot tell them apart. A blend can therefore land inside 98.5–101.5% while the drum contains less leucine than the label implies. An HPLC method adds the separation the titration lacks. Leucine's UV absorbance at 210 nm is weak, so a reliable method derivatises the amine or runs an amino-acid analyser with ninhydrin. The chromatogram should show leucine resolved from isoleucine and valine, not just a single peak at the expected time. Dried basis corrects the assay for water. At 99.0% as-is and 0.4% loss on drying, the dried figure is 99.4%; the correction is small in the middle of the range and decisive at the edges. A lot at 100.9% with 0.5% water becomes 101.4%, near the ceiling; the same result at 0.2% water is 101.1%. The as-is and dried values should both be visible, because water is mass that is not leucine. A result above 100% is a method recovery, not extra purity. Titration standards and drying corrections carry a small bias; 100.8% means the method recovered slightly more than its standard, not that the drum contains more than pure leucine. ## Release limit, batch result and the lines that get skipped The limit column is the acceptance criterion; the result column is the measurement. A sheet that repeats the range under “result” has not reported the lot. The method column is what makes the other two auditable. Three lines need context. Rotation: the reading changes with solvent, concentration, cell length and temperature, so a range without conditions cannot be reproduced. pH: 5.5–6.5 at 5% is near leucine's isoelectric point; a shift downward points to residual acid, upward to base or ammonia, and neither is a purity verdict by itself. Residue: the ≤0.1% cap limits inorganic salts; a low assay with a high residue is a different problem from a low assay with a low residue. A pass is a conclusion, and the sheet should carry the evidence for it rather than the conclusion alone. ## What moves from lot to lot Fermentation titre, crystallisation and drying move the assay. Water follows the dryer and the humidity of the packing room. Mesh follows the mill and the sieve. pH follows neutralisation and washing. Rotation should stay in a narrow band for a genuine L lot; a drift toward zero is a chiral problem, not ordinary batch variation. Colour is the least measurable line on the sheet and often the earliest signal. A cream tint can come from the mother liquor, a hot dryer or trace iron while the assay still passes. Look at the batch record and the retained sample before rejecting a lot on shade. One result at the edge is a question. A sequence of three lots moving the same way is a supplier conversation. ## When an outside laboratory is worth ordering An outside laboratory is worth ordering at four points: a new manufacturer, a first shipment into a regulated market, a certificate without a rotation, or a result that cannot be reconciled. The panel should be targeted: polarimetry with conditions, chiral HPLC for D-leucine, IR against a reference, an amino-acid profile that resolves leucine from isoleucine and valine, ICP-MS for the metals, and the micro panel. Ask for the detection limit of the chiral method. A “not detected” entry with no limit says more about the method than about the drum. The same applies to the amino-acid profile: the report should name the column and the detection mode. Keep the chain of custody. The referee should test the retained sample, and the lot code should follow the sample from the drum to the report. ## What to put side by side Supplier comparison lines for L-leucine | Line | Why it separates offers | Form and CAS | Free L-leucine 61-90-5, DL-leucine 328-39-2 and a blend are different materials | Assay and basis | A dried-basis titration and an as-is HPLC result are not interchangeable | Rotation | The value plus solvent, concentration, temperature and basis | Water | ≤0.5%; a 0.2% lot and a 0.5% lot behave differently in a humid room | pH and residue | Process indicators; a low assay with high ash is a salt problem | Mesh | 40 mesh, 80 mesh and granulated lots have different flow | Metals and micro | Limits and methods should match the destination market | Traceability | One lot code on the certificate, the pack and the retained sample Two offers can agree on 99% and disagree on rotation, water and mesh; that is not the same powder. The lot code is the second half of the comparison: manufacturer, route, certificate, drum and retained sample should point to one another. The catalog specification sits on the L-leucine product page. The form question is covered on the grade page, the tests that distinguish the L form from a blend on the identity page, and the release workflow on the quality page. The HPLC method is set out in the HPLC note. ### 02 Free L-leucine or a BCAA blend: choosing a grade URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-leucine/grades/ Reviewed: 2026-11-19 Free L-leucine and a BCAA blend sit in the same catalogue section, but they are different label declarations. The free form is a single amino acid at 98.5–101.5% on the dried basis; a 2:1:1 blend is a mixture in which leucine is only half the mass. The decision follows the label, the grams of leucine the formula needs and the dosage form, not the weight on the pack. In one lineA BCAA blend is a formula, not a grade: the label, the leucine content per gram and the test panel all change when the form changes. ## Two decisions hide behind the word “grade” Grade is an overloaded word in this category. It can mean the chemical form — free L-leucine or a three-amino-acid blend — the physical form (40 mesh, 80 mesh, granulated), or a purity claim attached to either. A quotation that says only “leucine 99%” has not told you which of those it is selling. For this product the molecule is L-leucine, CAS 61-90-5. DL-leucine is a different material with its own CAS 328-39-2, certificate and label; a BCAA blend is a mixture of three ingredients, not a variant of the free acid. A titration does not settle the chemical-form question. A blend can be built to consume titrant inside the 98.5–101.5% window because the method counts amino groups, not leucine molecules. The label and the component assays are what separate the products. ## Free L-leucine and a blend side by side Free L-leucine, 2:1:1 and 4:1:1 blends by mass (rounded) | Attribute | Free L-leucine | BCAA 2:1:1 | BCAA 4:1:1 | Composition | One substance | Three amino acids | Three amino acids | Leucine per gram | 1.00 g | 0.50 g | 0.67 g | Isoleucine per gram | None | 0.25 g | 0.17 g | Valine per gram | None | 0.25 g | 0.17 g | Assay | 98.5–101.5% by titration, dried basis | Each component by HPLC; ratio by mass | Each component by HPLC; ratio by mass | Label name | L-leucine | L-leucine, L-isoleucine, L-valine | L-leucine, L-isoleucine, L-valine | Identity check | IR and specific rotation | Component profile and ratio | Component profile and ratio | Certificate | One assay and one rotation | Three assays plus blend uniformity | Three assays plus blend uniformity The arithmetic is simple and worth doing before the quotation is compared. In a 2:1:1 blend, leucine is 2 parts of 4, or 50% by mass; in a 4:1:1 blend it is 4 parts of 6, or 66.7%. An instantised or carrier-containing blend adds mass that is not amino acid, so the leucine figure is lower and the label should show it. Read the grams of leucine, not the grams of blend. ## What 40 mesh, 80 mesh and granulation change The reference cut is 40 mesh: at least 95% of the powder passes a 425 µm opening. Capsule fillers and ribbon blenders are usually set up around that cut, and it is the grade to quote unless the line has a reason to move. Milling to 80 mesh makes a finer powder that disperses faster in a small blend, but it also throws more dust, carries more static and is harder to keep from segregating away from a coarser excipient. Granulation goes the other way: the particles are built up, so the powder flows more freely and fills a capsule or stick more evenly, while dissolving more slowly. Neither is an upgrade in the abstract. The filling line and the finished form decide, and a trial on the actual equipment decides between them. A blend introduces a third physical risk. Three powders with different particle sizes and bulk densities can unmix in a drum, in a hopper or during stick filling. Ask for the particle-size distribution of each component and a homogeneity result on the blended lot; a mix that is uniform in the blender can still segregate on the way to the filler. ## Fitting the form to the dosage form A capsule or tablet line can run the 40 mesh powder as it arrives. A formula that carries a gram or more of leucine becomes a large tablet or a handful of capsules, so the granulated grade is often easier on the press; a compaction trial shows whether the press needs a binder or a bigger tool. Capsules tolerate a finer powder better, but a milled lot can arch over the hopper and slow the fill. Sticks and drink mixes are harder, because the powder has to disperse into the serving volume. L-leucine is sparingly soluble, about 22 g/L at ambient temperature, so 3 g in 200 mL sits below saturation and 5 g in 200 mL sits above it and may leave a fine solid. More water, a coarser granule or a smaller serving each solves part of that; the trial belongs at the serving volume and temperature, not in a warm laboratory beaker. ## Writing the grade into the specification The specification is where the grade becomes enforceable. For free L-leucine it should name the substance and CAS 61-90-5, give the assay by titration on the dried basis, write the rotation with the solvent, concentration and temperature used, cap loss on drying at 0.5%, set residue at ≤0.1%, fix pH 5.5–6.5 at 5%, and specify the mesh — the 40 mesh cut (95% passing), or the milled or granulated variant ordered. For a blend the specification needs more lines, not fewer: the ratio by mass, the assay of each of the three components, the blending and uniformity procedure, the particle-size distribution of each component, and the label declaration. “BCAA 2:1:1” on its own is a formula name, not a specification. How a lot is released is set out on the COA page; how the L form is separated from a blend is on the identity page. ## When not to switch Do not switch free L-leucine to a blend to keep a label that says L-leucine. The label has to name every ingredient in the drum, and a blend that is declared as leucine is a labelling error before it is a specification error. Do not switch a blend to free leucine if the artwork describes a 2:1:1 product: the ratio is part of the formula, and removing two components changes the serving size and the label. Do not accept “leucine 2:1:1” without a component assay and a uniformity result, and do not compare a free-leucine quotation with a blend quotation on the invoice weight alone. The head-to-head comparison is on the L-leucine versus BCAA page; the label rules that follow the name are on the compliance page, and the catalog specification is on the product page. ### 02.1 L-leucine vs a BCAA blend: dose, ratio and the label URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-leucine/grades/leucine-vs-bcaa/ Reviewed: 2026-11-19 Free L-leucine and a BCAA blend are chosen by what the label has to say and how many grams of leucine the formula needs. Free L-leucine is the whole of the declared ingredient; a 2:1:1 blend is half leucine by mass, so the same leucine target needs twice the powder. The ratio is a formula decision, the label has to name every component, and the assay has to be read component by component. In one lineA 2:1:1 blend is not a stronger leucine: it is half leucine by mass, and the label has to name the other two amino acids. ## One substance or three Free L-leucine is a single substance: CAS 61-90-5, formula C6H13NO2, one peak in an amino-acid profile. A BCAA blend is a mixture of L-leucine, L-isoleucine and L-valine, and “BCAA” is a category name rather than an ingredient name. The blend has no single CAS number and no single specific rotation that describes the product; it has a ratio, three component assays and a uniformity result. This is why “leucine 2:1:1” is not a grade of leucine. It is a formula in which leucine is one of three components. A quotation that offers it as a variant of free leucine has mixed two different products, and the label review will find the difference even if the pack weight does not. ## What 2:1:1 actually means BCAA ratios by mass and the leucine they deliver (rounded) | Ratio | Leucine | Isoleucine | Valine | Leucine per gram | 2:1:1 | 50.0% | 25.0% | 25.0% | 0.50 g | 4:1:1 | 66.7% | 16.7% | 16.7% | 0.67 g | 8:1:1 | 80.0% | 10.0% | 10.0% | 0.80 g The ratio is normally quoted by mass, not by moles, but the convention should be printed beside it. On a mass basis, a 2:1:1 blend is two parts leucine to one part isoleucine and one part valine, which is why the leucine fraction is 2/4 and not 2/3. A molar ratio gives a slightly different mass split because valine is lighter than the other two. The ratio also does not set the assay: each component has its own assay, and the blend's total amino-acid titration can sit near 100% while the leucine fraction is 50%. An instantised blend, a flavoured blend or a blend with a carrier adds mass that is not amino acid. The ratio then describes the amino-acid portion, and the leucine per gram of finished powder is lower. Ask for the formula, not only the ratio. ## The arithmetic that changes the serving size Powder needed for a formula that specifies 3 g of leucine | Form | Leucine fraction | Powder for 3 g leucine | Free L-leucine | 1.00 | 3.0 g | BCAA 2:1:1 | 0.50 | 6.0 g | BCAA 4:1:1 | 0.67 | 4.5 g | BCAA 8:1:1 | 0.80 | 3.75 g The arithmetic is division: grams of leucine divided by the leucine fraction. It is the first number to check when a blend is substituted for free leucine, because the serving size and the label amount both change. A 3 g leucine formula does not become a 3 g blend formula; it becomes a 6 g blend formula at 2:1:1, before any carrier is counted. The same arithmetic runs the other way when a blend is replaced by free leucine. The serving gets smaller, and the isoleucine and valine lines disappear from the label. That is a formula change, not a sourcing change, and it needs a new specification and a new label review. ## Naming the components on the label In the EU, the ingredient list names each component: “L-leucine, L-isoleucine, L-valine”. A category name alone does not replace the component list, and the amount declared has to describe the ingredient named. In the US, the panel gives each dietary ingredient its own line and amount; a proprietary blend name can group them, but the components still have to appear. In the UK, retained labelling law follows the same principle, with Northern Ireland on the EU route. Amino acids have no Nutrient Reference Value and no Daily Value, so the amount carries no percentage in any of the three markets. The label names the form and the amount, and the claim wording has to stay inside what the destination market permits. A blend does not become free leucine because the front of the pack says “leucine”. The ingredient name on the artwork should match the certificate. If the certificate describes a blend and the artwork says L-leucine, the file has a contradiction that no assay can resolve. ## When to choose which Matching the form to the brief | Brief | Form | Reason | Label names L-leucine and the target is leucine | Free L-leucine, 40 mesh | One substance, 1.00 g leucine per gram | Label declares a 2:1:1 BCAA blend | 2:1:1 blend | The ratio is the product; all three components are named | Formula needs 3 g leucine from a blend | 2:1:1 blend, 6 g | The leucine fraction is 0.50 | Capsule with a fixed fill weight | Free L-leucine, milled or granulated | The blend adds two components and lowers leucine per capsule | “Leucine 2:1:1” offer without component assays | Neither | The ratio is unproven and the label cannot be written Choose free leucine when the label and the formula are about leucine. Choose a blend when the ratio is the product and the label declares all three components. Do not choose a blend to keep a leucine claim, and do not choose free leucine to fill a blend label; both are label errors with a specification attached. ## Writing the purchase specification For free L-leucine, write the substance and CAS 61-90-5, the assay on the dried basis at 98.5–101.5%, the rotation and its conditions, water at ≤0.5%, pH 5.5–6.5, 40 mesh, the metal and micro panels. For a blend, write the ratio by mass, the assay of each component, the blending and uniformity procedure, the particle-size distribution of each component, and the label declaration. Add the carrier or excipient content if the blend is not 100% amino acid. Then check the arithmetic one more time: the grams of leucine per gram of powder, multiplied by the serving size, must equal the leucine figure on the label. If it does not, the formula and the label are describing different products. The grade decision is set out on the grade page; the certificate lines are on the COA page; the identity tests are on the identity page; the market rules are on the compliance page, and the catalog specification is on the product page. ### 03 L-leucine is stable dry; moisture and the matrix decide the rest URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-leucine/stability/ Reviewed: 2026-11-19 Dry L-leucine is one of the more stable amino acids in the warehouse. It is not a hydrate, it has no chromophore that light can activate, and a sealed foil pouch protects it from the only common failure, which is water. The release limit for water is 0.5% loss on drying; a powder that picks up more cakes, loses flow and can support microbial growth in a finished mix. The matrix is the second variable: a reducing sugar plus heat plus water will brown an amino acid even when the powder was released correctly. In one lineThe molecule is stable dry; moisture, the matrix and the pack decide whether the lot still meets its specification at the end of the shelf life. ## Dry powder, moisture and caking The commercial crystalline form is the free amino acid, not a hydrate, so there is no water of crystallisation to lose and no hydrate transition to watch. The ≤0.5% loss-on-drying limit is surface and inter-crystal moisture, and it is a release test rather than a drying target. A lot at 0.1% and a lot at 0.45% are both inside the specification, but they behave differently after a week in an opened pouch. The isobutyl side chain makes leucine less hygroscopic than glycine or citrulline, which is why the dry powder travels well. The advantage is relative, not absolute. A 40 mesh crystalline powder still has surface area, and moisture cycling in a warehouse causes caking at the particle contacts, a loss of flow and, in a blend, segregation of the lumps. Water activity above the level that supports mould is a microbiological question, not a chemical one, but it starts with the same moisture. The fix is mechanical before it is chemical: a sealed foil pouch, a drum with an intact liner, a dry packing room and a closed container between weighings. ## Solution, pH and heat L-leucine is sparingly soluble, about 22 g/L at ambient temperature. The pH test is run at 5%, which is above the room-temperature solubility limit; the preparation may be a dispersion, so the method should state how it is made. A drink mix at 5 g per 200 mL can leave a fine solid. The pH window is 5.5–6.5, close to the isoelectric point of leucine, where solubility is at its lowest. Moving the pH away from that point increases solubility, and it also changes the taste and the buffering of the finished drink. In solution the clock is microbial, not hydrolytic. There is no amide or ester linkage to hydrolyse, and the carboxylic acid and amino group are stable at neutral pH and ambient temperature, and a sterile, preservative-controlled system is a formulation decision rather than a leucine decision. Heat above normal process temperatures is a different matter: dry leucine tolerates typical drying and blending temperatures, while a wet matrix with a reducing sugar does not. A clear solution is not a stability result. Hold-time samples should be tested for assay, pH, appearance and micro at the real pH and the real serving volume, because a dilute solution and a concentrate can fail differently. ## The factors that actually move the result What changes L-leucine in storage and in a formula | Factor | Effect | Control | Moisture | Caking, loss of flow, higher water activity | Sealed foil pouch, dry room, closed drum | Heat | Browning in a matrix with a reducing sugar | Keep process temperature and water activity low | Light | No chromophore; not the primary risk | Opaque or foil pack for moisture, not for light | pH | Solubility and taste shift away from the isoelectric point | Fix the dilution and the pH of the finished drink | Oxygen | Little direct effect on the dry solid | Nitrogen flush is optional; the seal matters more | Reducing sugars | Maillard browning with heat and moisture | Control water activity; check the sugar source | Packaging | Moisture and odour transfer through an open pack | Foil pouch, lined drum, reseal after weighing Moisture sits at the top because it enables the other failures: it feeds browning, raises water activity and turns a free-flowing powder into a caked one. ## The stability protocol behind the date A stability programme for a food ingredient is not the same as a drug-substance programme, but the logic is the same: store the powder in its market pack, at conditions that bracket the market, and test the lines that can move. A workable design uses 25 °C/60% relative humidity and 30 °C/65% for real-time data, with 40 °C/75% for accelerated information, and timepoints at 0, 3, 6, 9, 12 and 24 months. Stability design for L-leucine powder and matrix | Condition | Timepoints | Tests | 25 °C / 60% RH | 0, 3, 6, 9, 12, 24 months | Appearance, assay, loss on drying, rotation, pH, mesh, micro | 30 °C / 65% RH | 0, 3, 6, 12 months | Same panel, with water activity on the matrix | 40 °C / 75% RH | 0, 1, 3, 6 months | Same panel; browning and caking are the early signals Run two studies, not one. The powder in its sealed pouch answers the shelf life of the ingredient; the powder in the model matrix answers the shelf life of the product. A matrix study should use the real packaging and the real water activity, because a stick pack and a 500 g jar do not fail on the same day. ## The formula is the stability test L-leucine carries a primary amine, and a primary amine reacts with a reducing sugar. In a dry powder the reaction is slow; with heat and moisture it accelerates, and the visible end is a yellow or brown colour that no assay on the raw material would have predicted. Glucose, fructose and glucose syrup are the usual sources; maltodextrin is less reducing but not automatically inert. Check the formula for reducing sugars whenever a browned batch appears. Other ingredients matter as well. Aldehyde flavours can react with the amine, acidic components shift the pH and the taste, and metal ions can catalyse colour formation. None of these is a reason to avoid leucine; they are reasons to test the finished matrix, not only the powder. ## Shelf life, opened packs and retest The shelf life of the sealed pack comes from the real-time data and is stated on the certificate and the label. It is not a single number that transfers across packs and matrices. A foil pouch, a fiber drum and a stick pack have different moisture barriers, and a powder stable in one may fail earlier in another. The printed date applies to the unopened pack. A retest date applies to a sealed lot, not to an opened pouch. Once a pouch is opened, the clock is moisture and hygiene, and the opened pack needs its own use-by date in the finished-product specification. The release tests are on the COA page, and the moisture test is explained in the loss-on-drying note. The pack sizes and the storage instructions are on the MOQ page, the grade choice is on the grade page, and the release workflow is on the quality page. The catalog specification is on the product page. ### 04 L-Leucine: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-leucine/moq/ Reviewed: 2026-11-19 The minimum order for L-leucine is 1 kg, packed in a foil pouch that carries a lot number and a certificate. The 25 kg fiber drum is the production unit, and standard 40 mesh material ships in 1–7 days; a milled or granulated grade is scheduled rather than pulled from stock. A quote is built from six details, and the specification is the one that decides whether two quotations describe the same powder. In one lineThe 1 kg foil pouch is the smallest pack that can carry its own lot code and certificate, which is why the minimum order is set there. ## Why the minimum is 1 kg A minimum order is usually a packing decision before it is a commercial one. Below 1 kg, the material has to be repacked from a production lot into a container that no longer carries the original lot code, or it is drawn from a sample shelf with no release history. Either route breaks the chain between the certificate, the drum and the powder in the buyer's hands. The 1 kg pouch keeps that chain intact. It is filled from a released lot, labelled with the lot code, and shipped with the certificate for that lot. It is large enough for a formulation trial, a filler run and a retention sample, and small enough that a first order does not commit the buyer to a drum. A 1 kg order is a real order, not a spoonful taken from a drum. The 25 kg fiber drum is the unit for production. It carries the same lot code and the same certificate, and it is the pack that a repeated order will use. The move from pouch to drum is a scale decision, not a specification change; the material inside should be the same grade. ## Packs and what each one is for Standard packs for L-leucine | Pack | Net content | Typical use | Handling note | Aluminium foil pouch | 1 kg | Trial, sample, small batch | Reseal after weighing; keep dry | Fiber drum with liner | 25 kg | Production | Keep the liner intact; close the lid between uses The pouch is the moisture barrier that the stability of the powder depends on. A foil pouch that is torn or left open is no longer the pack that was tested. The drum adds mechanical protection and a liner, but it is not a guarantee against a humid room if the lid is left off. The label on each pack should show the product, lot code, net content, storage instruction and expiry or retest date. If the label on the pouch and the label on the drum disagree, the lot is not traceable and the shipment should be queried before it is opened. ## Lead time and what starts the clock Standard 40 mesh L-leucine ships in 1–7 days. The clock starts when the purchase order and the specification agree, not when the enquiry arrives: if the assay basis, the mesh or the documentation is still under discussion, the dispatch date is still moving. A milled 80 mesh or a granulated grade is a production step and is scheduled; it does not come off the same shelf as the standard powder. Dispatch time is not transit time. The 1–7 day window covers picking, packing and documents; the forwarder's schedule is separate. For a first shipment into a regulated market, add time for the importer's document check and any sample release the buyer wants to run before the drum is accepted. The documents that travel with the lot — certificate, specification, safety data sheet and the statements the buyer needs — should be confirmed at the quotation stage, not requested after the container is booked. ## What a quotation needs to contain Six details that make an L-leucine quote comparable | Detail | Why it changes the offer | Form and grade | Free L-leucine, 40 mesh, 80 mesh or granulated; a blend is a different product | Quantity and pack | 1 kg pouch or 25 kg drum, and the number of each | Specification and methods | Assay basis, rotation, loss on drying, pH, mesh, metals and micro | Destination and Incoterms | Documents, label language and the delivery point follow from these | Documentation | COA, SDS, specification, allergen and origin statements | Required date and sample | Whether the buyer needs a sample lot before the production lot Two quotes that agree on the quantity but differ on the assay basis, the rotation or the mesh are not comparable. The lowest line on a spreadsheet is often the one with the fewest specification lines, and the missing lines are the ones that decide whether the powder fills the capsule at the expected weight. ## Samples and lot identity A sample should be drawn from the lot that is being offered, not from a demonstration stock, and it should carry the same lot code as the certificate. Ask for the certificate with the sample: a sample with no lot code is a display item, not a traceable sample. Send enough for the intended trial, plus a retention portion. Run the trial on the sample before the production order, especially for a new mesh or a new granulation. Fill weight, flow, dust and blend uniformity are line-specific, and a certificate cannot predict them. If the trial passes, the production lot should be released against the same specification and the same lot code series. ## Terms worth agreeing before the first drum Put the specification in the purchase order and make it the release document. Agree the assay basis and the rotation conditions, the loss-on-drying limit, the mesh, the metal and micro limits, and the documents that must arrive with the lot. Agree the remedy if a release result misses the specification: replacement, credit or return, and who bears the return freight. Agree the quantity tolerance, the shelf life remaining at delivery, and the storage condition the seller is responsible for before dispatch. Agree the Incoterm and the payment terms in writing, and keep the lot code on every document so a later question can be traced to the right drum. None of these terms is a commercial concession; they are the conditions that make the offer meaningful. The certificate lines are explained on the COA page, the grade choices on the grade page, the storage case on the stability page, and the market rules on the compliance page. The release workflow is on the quality page, and the catalog specification is on the product page. ### 05 Where L-leucine is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-leucine/compliance/ Reviewed: 2026-11-19 L-leucine reaches the EU, US and UK as a food ingredient, and the permission question is rarely the obstacle. The file still has to show which form is sold, which metal limits apply, how the label names it and where the claim boundary sits. The three markets answer those questions with different instruments. In one linePermission, metal limits, the label name and the claim wording are four different questions, and one market's answer does not carry into another. ## Four checks, three markets An ingredient file answers at least four questions: a permission check (is the substance allowed in this category?), a contaminant check (does the lot meet the maximum levels?), a labelling check (does the pack name the ingredient correctly?) and a claims check (does the wording stay inside the authorised or permitted set?). A file that answers only the first will fail at the border or label review. Leucine is an amino acid. The EU supplement directive's positive list is built around vitamins and minerals, so leucine travels through general food law and the rules of the member state, not through Annex II. The US uses the dietary-supplement framework, and the UK uses retained food law. ## The EU and the UK Four instruments do most of the work. Regulation (EC) No 178/2002 sets the general food-safety requirement and the traceability duty. Directive 2002/46/EC sets the supplement category, the labelling particulars and any notification route a member state operates. Regulation (EU) No 1169/2011 sets the food-information rules, including the ingredient list. Regulation (EU) 2023/915 sets the contaminant maximum levels. Because L-leucine is not in Annex I or Annex II to Directive 2002/46/EC, the member state of sale may apply its own rules on amino acids in supplements, including a notification or a restriction. Check that national rule before the artwork is approved, not after. The label names the ingredient as “L-leucine”; there is no Nutrient Reference Value for an amino acid, so no percentage NRV applies. The supplement also carries the directive's warnings, including the statement not to exceed the stated dose. In Great Britain the operative texts are the Food Supplements (England) Regulations 2003 (with their devolved equivalents), retained EU food law and the Nutrition and Health Claims (England) Regulations 2007. The outcome is close to the EU position: the ingredient is named, the standard warnings apply, and a health claim has to appear in the GB register. Northern Ireland sits under the Windsor Framework and applies the EU texts, so a UK-wide launch needs both versions checked. ## The United States L-leucine is a dietary ingredient under the FD&C Act as amended by DSHEA. A supplement that contains it is made under the current good manufacturing practice rules in 21 CFR 111 and labelled under 21 CFR 101.36. There is no pre-market approval, but the GMP rules require identity, purity and composition records, and the label has to declare every dietary ingredient in the Supplement Facts panel. US federal law sets no maximum for lead, cadmium, mercury or arsenic in dietary supplements. That absence does not remove the adulteration duty; state law can add a warning requirement. California's Proposition 65 is a well-known example, and it applies to exposures, not to a certificate line. The Supplement Facts panel names “L-leucine” and gives the amount per serving. There is no Daily Value for an amino acid, so no %DV figure belongs beside it. A blend has to list its components, not only a proprietary blend name. ## Contaminant limits and the specification Heavy metals: market limits and the catalog specification | Parameter | EU maximum level | US federal | UK (GB) | Product specification | Lead (Pb) | 3.0 mg/kg in food supplements | No federal maximum level | Retained limit, 3.0 mg/kg | ≤3 mg/kg | Cadmium (Cd) | 1.0 mg/kg in food supplements | No federal maximum level | Retained limit, 1.0 mg/kg | ≤1 mg/kg | Mercury (Hg) | 0.1 mg/kg in food supplements | No federal maximum level | Retained limit, 0.1 mg/kg | ≤0.1 mg/kg | Arsenic (As) | No EU-wide maximum level for total arsenic in supplements | No federal maximum level | No GB-wide maximum level for total arsenic | ≤2 mg/kg The EU figures come from Regulation (EU) 2023/915; the annex has product-specific exceptions, so check the current text. The UK column describes the retained GB position and should be rechecked against the current GB text. The product specification is the contractual line: where a legal limit exists, the specification sits at or below that limit, and the lot certificate has to show a result against it. Microbiology has no EU maximum level for a supplement of this kind; the APC, yeast and mould, E. coli and Salmonella limits are product limits and belong in the buyer's file. ## The claim boundary In the EU, a health claim needs to be authorised under Regulation (EC) No 1924/2006 and listed in the EU Register. As of this review there is no authorised claim for L-leucine, so a pack that carries one is relying on a claim that the register does not support. The same is true in Great Britain under the GB register. A nutrition claim is a separate question and depends on the finished product, not on the leucine line. In the US, a structure/function claim is permitted without pre-market approval if it is truthful, substantiated and carries the disclaimer required by 21 CFR 101.93; a disease claim is a drug claim and is not available to a supplement. The safe file makes no health claim at all and describes the ingredient, the amount and the form. ## The file a buyer should hold Documents for an L-leucine ingredient file | Document | What it should show | Specification | Form, CAS 61-90-5, assay basis, rotation, loss on drying, pH, mesh, metals, micro | Certificate of analysis | The lot result against each limit, with methods | Safety data sheet | Handling, dust, storage and transport information | Manufacturing flow | Route, key process steps and the points that control identity | Allergen statement | Allergen cross-contact and the cleaning controls behind the statement | GMO and origin statements | GMO status and non-animal origin, where the route requires it | Metals and micro reports | The panel behind the certificate, with methods and limits ## A short pre-shipment checklist - The specification names free L-leucine and CAS 61-90-5, not “leucine”. - The assay is on the dried basis, and the certificate states the basis. - The specific rotation is reported with solvent, concentration and temperature. - The lot meets the destination market's metal limits, with the result on the certificate. - The label names L-leucine, or every component of the blend. - No health claim is carried unless it is authorised in the destination market. The release lines are explained on the COA page, the form question on the grade page, and the tests that prove the L form on the identity page. The market instruments are set out in the EU regulatory note, the US note and the UK note, and the catalog specification is on the product page. ### 06 How we prove an L-leucine lot is the L form URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-leucine/identity/ Reviewed: 2026-11-19 Proving an L-leucine lot is a process of elimination. The assay measures quantity, the rotation measures handedness, the chromatogram separates leucine from its isomers, and the document chain ties the results to the drum. None of the four is sufficient alone. In one lineThe L form is established by four results that agree, not by one line on a certificate. ## The four identity layers What each identity layer proves, and what it misses | Check | Evidence | What it establishes | What it leaves open | Document | COA, lot code, manufacturer | Traceability from the drum to the release record | Does not prove the powder in the drum | Class | Appearance, solubility, pH, ninhydrin, IR | An amino acid is present; IR gives a fingerprint | Ninhydrin cannot distinguish one amino acid from another | Quantity | Titration, HPLC | How much amino acid is present; HPLC separates the isomers | Titration counts every amino group; HPLC needs a standard | Chirality | Specific rotation, chiral HPLC | L, D or a mixture | Rotation is not a chiral purity assay unless the conditions are fixed IR is the practical centre of the class layer. Leucine, isoleucine and valine are all white crystalline amino acids that look alike in a drum, so the IR spectrum is often the first test that separates them; ninhydrin only confirms that an amino acid is present. Compare it with a reference run on the same instrument. ## The rotation, read as a ratio Specific rotation normalises the polarimeter reading for cell length and concentration, so a value can be compared across laboratories. The catalog window is +14.9° to +17.3° on the dried basis. The D form rotates in the opposite direction, and the racemic DL mixture sits close to zero, so the sign and the magnitude together say how far the lot is from racemic. A value in the window is what an L lot should show; a value at zero is not L-leucine. Dissolve 0.5 g in 100 mL and read it in a 1 dm tube: a specific rotation of +16° becomes an observed +0.08°. Temperature, dissolution and cell cleanliness all matter at that scale, so the certificate must print the solvent, concentration, temperature and basis. A rotation without those conditions cannot be checked. The window is an identity gate, not a chiral purity specification. A lot at the lower edge is still inside the specification, and the figure moves with the method. If the brief needs a limit on the D form, write a chiral HPLC limit into the specification rather than reading one into the rotation. ## What X-ray diffraction adds, and what it cannot see XRD records how the solid scatters X-rays. A crystalline lot produces sharp reflections at defined angles, and the pattern identifies the solid form; an amorphous carrier gives no sharp pattern, and a different crystalline substance gives a different pattern. For a blend, XRD can show the superimposed patterns of the components and can detect a crystalline excipient that the certificate does not mention. XRD cannot tell L-leucine from D-leucine. Enantiomers share the same lattice dimensions and powder pattern, so handedness is invisible to the method. Use XRD when the question is the solid form or the presence of a crystalline second phase, and use rotation or chiral HPLC when the question is the hand. For routine release, IR and rotation do the identity work; XRD is an investigation tool for a new source or a disputed solid form. The method is described in the XRD note. ## The routes that pass an assay Adulteration routes for L-leucine and the test that catches each | Adulterant | What still passes | What catches it | DL-leucine | Assay, appearance, pH, loss on drying | Rotation falls toward zero; chiral HPLC confirms the D form | L-isoleucine | Titration assay, ninhydrin, appearance | Rotation is far outside the leucine window; HPLC and IR separate it | L-valine | Titration assay, ninhydrin, appearance | Rotation outside the window; HPLC and IR separate it | Norleucine | Titration assay, appearance | HPLC retention and IR; rotation alone is not decisive | BCAA blend | Total titration can sit inside 98.5–101.5% | Three peaks in the amino-acid profile, and a ratio that does not match a single substance | Water | As-is assay falls; the dried-basis correction can bring it back into the window | Loss on drying, read with the as-is result | Inorganic salts | As-is assay falls; residue rises | Residue on ignition The blend route is the one that catches buyers who rely on the assay alone. Leucine, isoleucine and valine are isomers or homologues with the same amino-acid backbone, and a mixture can be built to titrate inside the leucine window. The certificate's single assay line cannot see the difference; the chromatogram can, and the rotation may. The water route is quieter. Added water lowers the as-is assay and raises the loss on drying; the dried-basis correction can hide the water from a reader who looks only at the corrected figure. Read the as-is result, the loss on drying and the residue together. ## Writing identity into the specification The specification should name L-leucine, CAS 61-90-5 and the formula C6H13NO2, then fix the four layers in writing: identification by IR against a reference and by ninhydrin; titration assay at 98.5–101.5% on the dried basis; rotation +14.9° to +17.3° with the solvent, concentration and temperature stated; and pH 5.5–6.5 for a 5% solution. The pH is a consistency check rather than an identity test: several amino acids sit in the same window, but a reading outside it points to residual acid or base. Loss on drying, residue, mesh, metals and micro complete the release sheet. Two optional lines help when the brief is strict. A chiral HPLC limit on D-leucine makes chiral purity quantitative. An amino-acid profile limit stops a blended lot; a related-substance limit stops a reworked one. Neither line is on the catalog specification, and both can be agreed for a project. The release lines are described on the COA page, and the grade question is on the grade page. ## Five questions for a supplier - What is the assay method, and is the result reported on the dried basis? - What is the specific rotation, with the solvent, concentration and temperature used? - Can you send the chromatogram that separates leucine from isoleucine and valine? - Is the lot free L-leucine or a blend, and what name goes on the label? - Who manufactured the lot, and do the certificate, the drum and the retained sample carry the same lot code? An answer that repeats the specification without a method or a chromatogram is not an answer; the supplier who can produce all four layers is the one to keep. The market rules that follow the identity are on the compliance page, the comparison with a blend is on the L-leucine versus BCAA page, the IR method is described in the FTIR note, and the catalog specification is on the product page. ### 01 What the COA for L-valine actually contains URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-valine/coa/ Reviewed: 2026-11-19 The certificate for an L-valine lot reports appearance, identification by infrared and ninhydrin, assay by titration on the dried basis, specific rotation, loss on drying, residue on ignition, pH, particle size, heavy metals and microbiology. Each line carries the test, the method and the release range. These values are the catalog specification; the batch COA confirms a particular lot, and no single figure proves the L form. In one lineThe titration measures how much amino acid is in the drum; the rotation says it is the L form, and the dried basis says what the percentage measures. ## The certificate as a test report A useful certificate answers three questions per line: what was measured, by which method, and against which limit. Identity, assay and physical limits · L-valine | Parameter | Method | Release limit | Identification | Infrared and ninhydrin reaction | Conforms | Assay (dried basis) | Titration | 98.5–101.5% | Specific rotation | Polarimetry, dried basis | +26.6° to +28.8° | Loss on drying | Gravimetric | ≤0.5% | Residue on ignition | Gravimetric | ≤0.1% | pH (5% solution) | Potentiometry | 5.5–6.5 | Particle size | Sieve analysis | ≥95% through 40 mesh | Heavy metals | ICP-MS or ICP-OES | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent Two lines matter most: the assay says how much amino acid is present, the rotation says which configuration. The rest describe water, powder and contaminants. ## What the assay measures, and on what basis The assay titrates the amino acid's acid and base groups and returns the mass of amino acid after correction to the dried material. The 98.5–101.5% window is a release range, not a purity grade: a result above 100% is possible when the titrant and the drying correction carry a small positive bias. The dried basis makes the figure comparable. Loss on drying is capped at 0.5%, so a lot at the water limit reads slightly higher after correction than as-is. The certificate should show both. Water is not a solvent residue, but it is mass that is not valine. Titration is not specific. Leucine and isoleucine each carry one amino and one carboxyl group, so they consume titrant in the same proportion and can lift a titre without being valine. HPLC separates the branched-chain amino acids and shows whether the main peak is the named one. Where both are reported, ask which method releases the lot. Specific rotation belongs on the same dried basis. The reading depends on solvent, concentration, path length and temperature, so conditions belong on the certificate. The window +26.6° to +28.8° is consistent with L-valine; it does not prove the drum is only valine. pH is a solution check: 5.5–6.5 at 5%, near the isoelectric point, with a shift pointing to residual acid or alkali, another salt or a blend. ## Release limit versus batch result The release limit is the gate; the batch result is what the laboratory measured. They belong in separate columns with method and basis. A result column filled with the range is a copy of the gate, not a measurement. Reading the limit and result columns on an L-valine COA | Column | What belongs there | What it does not mean | Release limit | The catalog or agreed acceptance range | A measurement of this lot | Batch result | The value obtained on the lot by the named method | A guarantee for the next lot | Method | Titration, polarimetry, gravimetry, sieving, ICP-MS or ICP-OES, plate count | That the method is specific to valine | Basis | Dried basis, as-is or solution concentration | A detail that can be left to the reader | Conclusion | Pass or fail against the limit | A substitute for the raw result Appearance is descriptive; pH and water are narrow checks; the contaminant and micro panels have their own limits. “Conforms” works for identification only when the tests are named. ## What moves between batches Assay moves with crystallisation yield, drying and the titration standard. Water moves with the dryer and the pack: an open pouch gains moisture, and the next dried-basis assay hides it. pH moves with residual acid or alkali. Particle size moves with mill and sieve, which is why mesh belongs in the specification. Rotation is the line to watch. A drift toward the bottom of the window with a flat assay can mean a small D fraction, a change in polarimeter conditions or a different raw-material source. One edge result is not a rejection; a sequence is a supplier question. Colour and flow are less quantitative and often more revealing. A grey or yellow tint can point to hot drying, iron or a dirty mill while the assay passes. Ask for the batch record and deviation history, and compare the retained sample with the drum. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a rotation that does not fit, a suspected DL mixture or a blend sold as free valine. A targeted panel is enough: rotation with conditions, chiral HPLC for D-valine, assay by titration and HPLC, infrared identification, ICP-MS and a plate count. Ask for detection and quantification limits. “D-valine not detected” without a limit describes the method, not the sample. Give the referee the retained sample and keep the chain intact; the sample tested should be the sample retained. ## What to compare between suppliers Compare six lines: name, form and CAS; assay method and basis; rotation and conditions; water, residue and pH; particle size; contaminants. Two quotes that match on assay but differ on rotation or water are not the same powder. Six lines for a supplier comparison · L-valine | Line | What to compare | Why it matters | Identity | L-valine, CAS 72-18-4, formula C5H11NO2 | A blend or a DL mixture can carry the same name | Assay | Titration, 98.5–101.5% on the dried basis, with HPLC if offered | Method and basis set what the percentage means | Rotation | +26.6° to +28.8° on the dried basis, with solvent and temperature | Configuration is not visible in the assay | Water and residue | Loss on drying ≤0.5%; residue on ignition ≤0.1% | Water and ash are mass that is not valine | Physical | ≥95% through 40 mesh; milled or granulated on request | Flow and blend uniformity depend on particle size | Contaminants | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg; micro panel | Release limits are part of the specification The lot code should match on certificate, pack and retained sample, and the certificate should name the manufacturer and route. A correct certificate can still belong to another drum. The catalog specification is on the L-valine product page; forms are compared on the grade page, identity tests are on the identity page, and the release workflow is on the quality page. The separation is in the HPLC method note, and assay is defined in the glossary. ### 02 Free L-valine or a BCAA blend: choosing a grade URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-valine/grades/ Reviewed: 2026-11-19 L-valine is sold as the free amino acid and as one component of a BCAA blend. The molecule is the same, but the grade decision changes the valine share, the assay the certificate reports, the label and the flow of the powder. A 2:1:1 blend is 25% valine by weight, so one gram of valine sits in four grams of blend. In one lineA BCAA ratio is a formula decision, not a grade of valine: the blend changes the valine share and the label, while the molecule and its specification stay the same. ## Why the form is the grade Purity and form are different questions. Both a free L-valine powder and a BCAA blend can be described as 99% pure, but the first is a single amino acid and the second is a mixture of three. The assay on a free-valine certificate reports valine; the assay on a blend should report leucine, isoleucine and valine separately, or a total with each component declared. A single “BCAA 99%” figure is not a valine assay. The label follows the ingredient. A panel that says L-valine describes the free amino acid; a panel that says BCAA 2:1:1 describes a blend, and the valine amount is a fraction of the blend weight. The two are not interchangeable in a specification, a certificate or an artwork. A drum change without a label change is a labelling defect. Grade in this range means form and ratio, not a ladder of purity. The free amino acid is the grade when valine is the declared ingredient; the blend is the grade when the formula is built around the three branched-chain amino acids together. ## Free valine and the common ratios Free L-valine and BCAA blends · what differs | Form | Valine share | What the COA reports | Usual label name | Free L-valine | The whole ingredient | Assay 98.5–101.5% on the dried basis, rotation and water | L-valine | BCAA 2:1:1 | 25% by weight | Leucine, isoleucine and valine, each with an assay | BCAA 2:1:1, with the three components | BCAA 4:1:1 | 16.7% by weight | Leucine, isoleucine and valine, each with an assay | BCAA 4:1:1, with the three components | BCAA 8:1:1 | 10% by weight | Leucine, isoleucine and valine, each with an assay | BCAA 8:1:1, with the three components The ratio is written leucine : isoleucine : valine, and most commercial specifications use parts by weight. Confirm the order and the basis. A 2:1:1 molar blend carries about 22.9% valine, because valine's molecular weight is lower than leucine's and isoleucine's; at 4:1:1 the molar share is about 15.2% and at 8:1:1 about 9.0%. The difference changes the conversion, so the basis belongs in the specification. A blend is not a dilution of valine with a neutral carrier. Leucine and isoleucine are declared ingredients with their own specifications, and the blend's certificate should trace all three component lots. Calling the blend “valine plus excipients” misdescribes it and breaks the label arithmetic. ## Mesh, flow and blend uniformity The standard free-valine grade is ≥95% through 40 mesh, with 80 mesh milling and granulation available. Mesh matters for capsule fill, tablet compression and blend uniformity. A finer powder flows less freely and can dust; a granulated grade flows better but dissolves more slowly. A blend adds segregation. Three powders with different particle sizes or densities can separate in a drum, a hopper or a stick-pack line, so the valine in the first sachet may not match the last. Buy a blend whose components are matched in particle size, or a granulated blend, and ask for a uniformity result on the finished mix rather than on the valine alone. Solubility is a formulation check, not a grade claim. Valine is more soluble than leucine or isoleucine, but a BCAA blend at a high load still disperses rather than dissolves. Test the blend in the final matrix, not only the free amino acid in water. ## The content conversion The conversion starts with the ratio. For a blend quoted by weight, valine's share is one part divided by the sum of the parts. At 2:1:1 the sum is four, so valine is 25%; at 4:1:1 the sum is six, so 16.7%; at 8:1:1 the sum is ten, so 10%. Valine content and the blend weight that carries it | Ratio (Leu : Ile : Val) | Valine by weight | Blend for 500 mg valine | Blend for 1,000 mg valine | 2:1:1 | 25.0% | 2.0 g | 4.0 g | 4:1:1 | 16.7% | 3.0 g | 6.0 g | 8:1:1 | 10.0% | 5.0 g | 10.0 g The arithmetic runs the other way too. Five grams of 2:1:1 delivers 1.25 g valine; five grams of 4:1:1 delivers 0.83 g. If the panel declares 1 g valine from a 2:1:1 blend, the blend weight is 4 g, and the leucine and isoleucine that come with it are 2 g and 1 g. That is a different formula from 1 g of free valine plus 3 g of another ingredient. If the supplier quotes a molar ratio, use the molecular weights: valine 117.15, leucine and isoleucine 131.17 g/mol. The valine share at 2:1:1 molar is 22.9%, at 4:1:1 15.2% and at 8:1:1 9.0%. The label arithmetic follows the basis the supplier actually used, so write that basis into the specification. ## What changes when you switch - Name and identity: free L-valine, CAS 72-18-4, versus a blend with three CAS numbers. - Assay: 98.5–101.5% valine on the dried basis versus a declared amount of each amino acid. - Rotation: a single L-valine rotation versus a blend whose rotation is a weighted mixture and cannot be read as a valine identity test. - Water and mesh: the free powder's loss on drying and mesh versus the blend's uniformity and each component's mesh. - Label: “L-valine” versus “BCAA 2:1:1” with the individual components and amounts. - Documents: a single-material certificate and specification versus a blend specification, three component certificates and a uniformity record. - MOQ: 1 kg of free valine versus a blend minimum set by the mixer, not by the valine line. Keep the free-valine specification for the valine component even when you buy a blend. The blend certificate should trace each component lot; a certificate that reports only a total has lost the thread. Choosing between the forms is a formula and label question, and the ratio arithmetic is taken further on the level-four page. The free-valine specification is on the product page; release tests are on the COA page; the ratio arithmetic continues on Valine in BCAA ratios; storage is on the stability page; market rules are on the compliance page; and assay is defined in the glossary. ### 02.1 Valine in BCAA ratios: what 2:1:1 and 4:1:1 change URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-valine/grades/valine-in-bcaa-ratios/ Reviewed: 2026-11-19 A BCAA ratio describes the parts of leucine, isoleucine and valine in a blend, normally by weight and in that order. Moving from 2:1:1 to 4:1:1 raises leucine's share and lowers valine's from 25% to 16.7%; the valine molecule and its specification do not change, but the weight needed to deliver a valine dose and the label arithmetic do. In one lineThe ratio changes how much valine arrives per gram of blend and what the label must declare; it does not change the valine specification. ## What the ratio means The ratio is written leucine : isoleucine : valine. 2:1:1 means two parts leucine, one part isoleucine and one part valine; 4:1:1 means four parts leucine to one and one. The parts can be by weight or by mole, and the convention should be printed with the ratio. Most commercial BCAA specifications use parts by weight. On that basis, 2:1:1 is 50% leucine, 25% isoleucine and 25% valine; 4:1:1 is 66.7%, 16.7% and 16.7%; 8:1:1 is 80%, 10% and 10%. A molar ratio gives a slightly lower valine share because valine's molecular weight is lower than the other two: 22.9% at 2:1:1 molar, 15.2% at 4:1:1 and 9.0% at 8:1:1. The ratio is not a purity figure and not a grade of valine. A 4:1:1 blend can be 99% pure amino acids and still contain 16.7% valine. The valine specification remains the same free-amino-acid specification. ## The content conversion Once the basis is fixed, valine's share is one part divided by the sum of the parts. For 2:1:1 the sum is four; for 4:1:1 it is six; for 8:1:1 it is ten. Valine content by ratio and the blend weight for one gram of valine | Ratio (Leu : Ile : Val) | Valine by weight | Valine by mole | Blend for 1,000 mg valine (weight basis) | 2:1:1 | 25.0% | 22.9% | 4.0 g | 4:1:1 | 16.7% | 15.2% | 6.0 g | 8:1:1 | 10.0% | 9.0% | 10.0 g Going the other way, five grams of 2:1:1 delivers 1.25 g valine, while five grams of 4:1:1 delivers 0.83 g. If a label declares 1 g valine from 2:1:1, the blend weight is 4 g, with 2 g leucine and 1 g isoleucine alongside. That is a different formula from 1 g free valine plus 3 g of another ingredient. Use the actual assay, not the ratio alone. A blend's certificate reports each amino acid; if the measured valine share differs from the nominal ratio, the conversion uses the measured figure. The ratio describes the formula; the assay describes the lot. ## What the label must show “BCAA 2:1:1” is a description, not an ingredient name. The panel should name L-leucine, L-isoleucine and L-valine and give the amount of each, or give the total blend and the ratio with the individual amounts. The exact format depends on the market. In the US, the Supplement Facts panel lists each dietary ingredient and its amount per serving. A proprietary-blend format has its own rules in 21 CFR 101.36, so check the current text before the artwork is fixed. In the EU and UK, the ingredient list names the three amino acids, and any voluntary amount declaration must match the batch. The arithmetic has to survive the serving size. A 5 g serving of 2:1:1 gives 2.5 g leucine, 1.25 g isoleucine and 1.25 g valine; the same 5 g of 4:1:1 gives 3.33 g, 0.83 g and 0.83 g. If the valine figure is declared, it must be the figure the blend delivers, not the figure the ratio implies at the midpoint. A free-valine product is simpler: the panel declares L-valine and the amount, and the certificate reports 98.5–101.5% on the dried basis. A blend cannot be declared as free valine, and free valine cannot be declared as a 2:1:1 blend. ## The regulatory frame Each amino acid is a separate ingredient. In the EU, amino acids in food supplements are not on the harmonised Annex II list, so the national rules of the destination Member State apply; a BCAA blend is three ingredients, each of which has to be permitted and declared. In the US, each is a dietary ingredient under DSHEA; in the UK, the retained framework applies. The ratio does not create a new ingredient or a new permission. As of this review, no authorised health claim attaches to the ratio as such in the EU or GB Register. A ratio is a formula statement, not a claim. A composition statement such as “2:1:1” must match the measured amounts, and any claim still has to be authorised and substantiated in its market. Check the current text before the label is fixed. The market notes for the EU, US and UK set out the instruments. ## When to choose which Choose 2:1:1 when the formula is built around a balanced three-amino-acid profile and valine at a quarter of the blend weight is the intended composition. Choose 4:1:1 when leucine is the dominant part of the formula and valine is a minor component; the valine share falls to a sixth, so the blend weight for a given valine dose rises by half. Choose free L-valine when valine is the declared ingredient and the dose is specified as valine. A blend cannot fill that label position without recalculating the panel, and a free-valine certificate cannot release a blend. The ratio decision is a formula and label decision, not a measure of quality. The specification, the assay and the identity tests for the valine component stay the same whichever ratio is chosen. ## Six checks before ordering - Ratio order and basis: leucine : isoleucine : valine, by weight or by mole. - Each component's assay and certificate. - Valine share and the blend weight for the declared valine dose. - Label amounts and serving-size arithmetic. - Specification and identity tests for each amino acid. - Market permission and claim wording for the blend. Write the ratio and basis into the purchase order, not only the product name. A “2:1:1” that means molar is a different blend from a “2:1:1” that means weight, and the label arithmetic will show it. The forms are compared on the grade page; release tests are on the COA page; identity tests are on the identity page; market rules are on the compliance page. The product hub carries the catalog specification, and assay is defined in the glossary. ### 03 L-valine is stable dry; moisture and the matrix decide the rest URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-valine/stability/ Reviewed: 2026-11-19 Dry crystalline L-valine is chemically stable in a sealed pack. The specification caps loss on drying at 0.5% and sets pH 5.5–6.5 at 5%; moisture uptake, heat and the finished matrix are what shorten the shelf life. A shelf life belongs to the pack and formula, not to the molecule alone. In one lineA sealed dry pack keeps L-valine stable; moisture, heat and the finished matrix set the shelf life, not the calendar. ## The dry solid and the open pack L-valine is a crystalline amino acid with no hydrolysable side chain, so the solid is chemically stable when it stays dry. The practical risks are physical: water uptake at the surface, caking under load, and colour change after a hot drying step. A 40-mesh powder has more surface per gram than a coarse crystal, so an open pouch in a humid room can pick up water without the assay moving. The certificate's loss on drying, ≤0.5%, is a release limit, not a storage specification. Keep the sealed pouch or drum cool, dry and out of direct sunlight, away from odours, and let a cold pack reach room temperature before opening so condensation does not form on the powder. A desiccant can help in a humid climate, but it cannot repair a folded, unsealed seam. Once a pack is opened, the liner is the barrier. Close it, expel air, write the opening date on the label and use the remainder within the site's re-test window. A drum that stays open on the floor is no longer a controlled pack. ## Water, pH and the liquid matrix Valine is more soluble in water than leucine or isoleucine, and a 5% solution sits at pH 5.5–6.5. In a drink or a liquid premix the chemistry is usually less limiting than the microbiology: an aqueous amino-acid solution is a nutrient medium, and preservation, pH, water activity and process hold time decide whether it stays in specification. Heat and extreme pH are the chemical risks. Prolonged holding at high temperature and alkaline pH can racemise amino acids, and reducing sugars can react with the free amino group in a Maillard pathway, especially in a concentrate that is later dried. A clear solution at day zero is not a stability result; test the finished matrix at the process pH and temperature. Valine itself has no special light sensitivity, but the pack still protects the matrix. If the formula contains a sensitive vitamin or a colour, valine is not the limiting ingredient, and the stability protocol should follow the ingredient that is. ## The factors that decide the outcome What moves L-valine in storage and in a formula | Factor | What it does | What to control | Moisture and humidity | Surface water, caking and loss on drying; can drive Maillard browning in dry mixes | Sealed liner, desiccant where needed, a dry packing room | Temperature | Drives drying and colour; heat with alkaline pH can racemise the amino acid | Cool storage and short heat exposure | pH | Moves the solution away from the 5.5–6.5 window; extreme pH plus heat is the chemical risk | Buffer the matrix and check the final pH | Matrix | Reducing sugars, metals and other actives; segregation in a blend | Compatibility work, uniformity checks, finished-product testing | Packaging | The seam and liner decide the moisture barrier; headspace and reclosure decide the opened life | Foil pouch, lined drum, sealed seam and a closed liner The first three can be studied on the raw material; the last two appear only in the finished product. A raw-material stability summary cannot replace a finished-product study. ## A stability protocol that answers the question A workable design has three conditions and one shared test panel. Long-term: 25 °C and 60% relative humidity. Intermediate: 30 °C and 65% relative humidity. Accelerated: 40 °C and 75% relative humidity. Test at 0, 3, 6, 12 and 24 months for long-term, and at 0, 1, 2, 3 and 6 months for accelerated. ICH Q1A(R2) is a useful reference for the design; it is not a legal requirement for a food supplement, and the destination market may ask for something different. Test the parameters that can fail: appearance, assay on the dried basis, specific rotation, loss on drying, pH, mesh and microbiology. Add the finished-product checks that matter: uniformity, dispersion or dissolution, flavour and colour where relevant. Test the market pack, not a laboratory jar, because the seam and the liner are part of the result. Run the study on the worst-case matrix and pack. Bracketing across pack sizes is acceptable when the smaller and larger packs use the same materials; a different liner is a different study. Keep the raw data and the deviation record, because a summary table without the sample weights and the chromatograms is hard to defend. ## Capsules, sticks, liquids and blends Capsules and tablets: water and mesh control fill weight, flow and capping. A granulated grade may run better, but it changes the dissolution and the mesh in the specification. Powder sticks and dry blends: the stick's foil is the moisture barrier, and the blend's components can segregate. Test uniformity at the start, middle and end of the run, and test the stick after accelerated humidity. Liquids and premixes: pH, preservation and heat hold are the variables. A valine solution is a microbial substrate, and a clear liquid is not evidence of stability. BCAA blends: three amino acids with different solubilities and particle sizes. The blend's stability is limited by the least stable component and by uniformity, not by valine alone. ## Assigning a shelf life A shelf life is assigned from data, not from a default. The supplier's stability summary should name the pack, the matrix, the conditions, the test panel and the time points behind the date. A 24-month date is common for a sealed dry powder, but it is a conclusion, not a starting assumption. Do not extend a date because a new lot passes its release tests. Extension needs stability data on the same pack and matrix, and a raw-material date does not transfer to a finished capsule or stick. The storage statement on the label should match the study: temperature range, dryness and the instruction to keep the pack closed. The release tests that feed the protocol are on the COA page; the pack sizes are on the MOQ page; the storage and labelling rules are on the compliance page. The product hub carries the catalog specification, the plate count is described in the microbiology method note, and loss on drying is defined in the glossary. ### 04 L-Valine: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-valine/moq/ Reviewed: 2026-11-19 L-valine starts at 1 kg, sealed in a foil pouch from a released lot with a batch COA; production runs move to the 25 kg fiber drum. The published lead time is 1–7 days once the specification and order are fixed. Form, mesh, pack and destination turn that baseline into a quotation. In one lineOne kilogram from a released lot is the qualification unit; the pack, the mesh and the destination market set the rest of the order. ## Why the minimum is one kilogram One kilogram is the smallest pack that remains tied to a lot number. It covers a bench trial, a repeat run after a formula change, and a retained sample for the project. A smaller amount is a hand sample: enough to look at, not enough to release a lot or compare two suppliers. The minimum is a pack, not a bulk threshold. A buyer who needs 500 g is better served by a sample than by a split pouch, because a split loses the sealed seam and the lot label. A buyer who needs 30 kg takes a drum plus pouches; the drum has its own liner and freight profile. L-valine is a single crystalline material, so the 1 kg unit does not change with the mesh. It changes with the pack: a milled or granulated lot still fills a 1 kg pouch, but the sample and the trial run should use the same mesh as production. ## The packs, and what each one protects Standard packs · L-valine crystalline powder | Pack | Net weight | Construction | Typical use | Watch | Foil pouch | 1 kg | Foil laminate, heat-sealed seams | Trial batch, retained sample, small run | A folded top is not a seal | Fiber drum | 25 kg | Fiber drum with a sealed inner liner | Full-scale production | The liner is the barrier, not the drum wall The pack label should show the product, form, lot, net weight and pack date, and the lot string must match the certificate. A desiccant can supplement the liner in a humid climate, but it cannot repair a seam that was folded rather than sealed. Non-standard packs are quoted, not stocked. L-valine is not classified as dangerous goods, so the pack is about protection, not transport class. The pouch is the unit a lab can open without touching a drum; the drum is the unit a production run draws from. Once a drum is opened, close the liner and write the date on the label. ## Lead time The clock starts when the specification and the order are fixed. An enquiry is not a confirmation, and a PO against a different specification resets the clock. The standard 40-mesh pack moves within the published 1–7 days; 80-mesh milling or granulation starts when the line schedules it, not when the email arrives. Paperwork runs alongside production. A destination that asks for a certificate of origin, a local-format SDS or a third-party test will not ship on commercial documents alone, so agree the document list before the PO. A public holiday in the shipping week adds a week in practice. State the required delivery date and the delivery term at enquiry, not after the PO. The lead time is a production and packing number; freight transit is separate. ## What the quotation needs A quotation is comparable only if it answers six questions. “L-valine 99%” plus a weight is not enough, because two suppliers can mean different forms, basis and packs. - Identity and form: L-valine, CAS 72-18-4, the free amino acid or a named BCAA ratio. - Specification: assay method and basis, rotation, loss on drying, residue, pH, mesh, contaminants and micro, plus the version that will be released against. - Particle size and processing: 40 mesh standard, 80 mesh milled, granulated, or a blend. - Quantity and pack: the number of 1 kg pouches, 25 kg drums or both, and whether a desiccant is required. - Destination and delivery term: so freight, documents and transit are quoted on one basis. - Documents and extra tests: COA, TDS, SDS, origin, allergen, GMO and animal-derived input statements, plus a third-party rotation or chiral check. A quote that omits the basis or the mesh is a number for an unspecified powder. Ask for the specification version and the lot range behind the offer. ## Samples Ask for material from the lot that will be supplied, with the same lot number on the bag and the certificate. Confirm it was drawn before sealing, not scooped from an opened drum. Order enough for the trial and a retained portion; a second request adds time. The sample is where the certificate stops and the powder starts: flow, dispersion, caking after a week on the bench, colour against the last lot. For L-valine, check the mesh in the intended process and run a blend uniformity trial if the material will be mixed. Record the sample lot, the date and the storage conditions. A sample kept in a warm office is not representative of a drum in a cool warehouse. ## Where the terms stop Payment, delivery term, validity and the document list belong in the quotation. This page covers the minimum, the packs and the lead time; the commercial terms sit in the offer. The minimum is quoted per line, so a mixed order is broken into separate lines. Three clauses are worth spelling out in the PO. The specification governs release, so a different mesh, water limit or form means a fresh specification and a fresh quotation. The certificate belongs to the lot, so the same lot code should appear on the certificate, the pack and the invoice. And the form has to be named: a PO for free L-valine should not accept a BCAA blend. Add the shelf life remaining at shipment if the material will be held, and the non-conformance route if a result falls outside the specification. A change of source or manufacturing route is a change to the file, not a detail to discover at the next audit. The release tests are on the COA page; the form and ratio choices are on the grade page; moisture behaviour is on the stability page; market requirements are on the compliance page. The product hub carries the catalog specification, MOQ and lead time are defined in the glossary, and the shipping terms sit on the logistics page. ### 05 Where L-valine is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-valine/compliance/ Reviewed: 2026-11-19 L-valine is used as a food supplement ingredient in the EU, the US and the UK, but no single permission covers all three. The EU has no harmonised positive list for amino acids, the US regulates it as a dietary ingredient, and the UK applies retained law. The file must show the form, the market, the contaminant data, the label and the claim boundary. In one linePermission, contaminant limits, label wording and claims are four separate questions, and the EU, US and UK answer them with different instruments. ## The four checks Four questions decide whether a lot can be sold: is the ingredient permitted in that market and form; does the finished product stay under the contaminant limits; does the label name the ingredient and amount correctly; and is any claim authorised and substantiated? A batch certificate supports all four and replaces none. The operator placing the product on the market owns the file; a supplier's certificate is an input, not a defence. This is a sourcing reference, not legal advice. ## European Union Directive 2002/46/EC harmonises food supplements, but its Annex II positive list covers vitamins and minerals, not amino acids. L-valine sits under general food law, Regulation (EC) No 178/2002, and any national rules the destination Member State applies. It has a history of use before 15 May 1997; confirm its current entry in the EU Novel Food Catalogue for the specific form and any national restriction. There is no harmonised maximum level for valine, and some Member States apply their own notification or composition rules. The supplement particulars come from Directive 2002/46/EC, and the general labelling rules from Regulation (EU) No 1169/2011. A BCAA blend is three amino acids, each permitted and declared; the ratio does not create a new ingredient. Regulation (EU) 2023/915, which applies from 25 May 2023, replaced Regulation (EC) No 1881/2006. Its limits apply to the product as sold, not to the drum, so a raw-material specification needs headroom for the finished dose and method uncertainty. ## United States L-valine is a dietary ingredient under DSHEA. The supplier should support that it was marketed in the US before 15 October 1994; such an ingredient does not need a new dietary ingredient notification. The product is made under 21 CFR 111 and labelled under 21 CFR 101.36. The FDA does not approve supplements before sale, so the file is the evidence. A structure/function claim is allowed if truthful, accurate and substantiated, with the DSHEA disclaimer in 21 CFR 101.93 and an FDA notification within 30 days of marketing. A disease claim is outside that route, and advertising is subject to FTC substantiation. In a BCAA blend, each amino acid is a dietary ingredient; the Supplement Facts panel should identify each one and its amount. A proprietary-blend format has its own rules in 21 CFR 101.36, so check the current text. ## United Kingdom The Food Supplements (England) Regulations 2003 list permitted vitamins and minerals; amino acids are not in those schedules, so L-valine sits under general food law and national rules. Wales and Scotland have parallel instruments, and Northern Ireland applies the EU list under the Windsor Framework. Great Britain retained Regulation (EC) No 1881/2006 as assimilated law rather than adopting Regulation (EU) 2023/915. The limits carried over, and they can be amended by UK instrument, so legislation.gov.uk is the reference. The Food Information Regulations 2014 apply the retained labelling rules, and the GB register lists permitted claims. A label checked against the EU text is not automatically current for Great Britain. ## Contaminant limits Heavy-metal limits for a food supplement · EU, US and UK | Metal | EU · 2023/915 | US federal | UK retained limits | Lead | 3.0 mg/kg | No numeric federal limit | 3.0 mg/kg | Cadmium | 1.0 mg/kg (3.0 for seaweed-based) | No numeric federal limit | 1.0 mg/kg | Mercury | 0.10 mg/kg | No numeric federal limit | 0.10 mg/kg | Arsenic | No harmonised limit; buyer sets one | No numeric federal limit | No harmonised limit; the buyer sets one The catalog limits are Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg. Lead, cadmium and mercury sit at or below the EU and UK ceilings; arsenic is a buyer-set limit. The EU and UK figures apply to the food as sold. US federal law has no numeric ceiling for these metals in supplements; cGMP applies. California's Proposition 65 sets daily exposure levels, including 0.5 µg/day for lead, 4.1 µg/day for cadmium and 10 µg/day for inorganic arsenic, so a dose can require a warning even when no federal limit is broken. ## The claim boundary In the EU and UK, a health claim must be authorised and appear in the applicable Register; Regulation (EC) No 1924/2006 also requires it to be truthful, clear and substantiated. As of this review, neither Register lists an authorised claim for L-valine as such; a BCAA ratio is a formula description, not a claim. In the US, a structure/function claim is possible under DSHEA with the disclaimer and the notification, but a disease claim is not. In all three markets the claim must describe the product, not a disease, with evidence in the file. A composition statement such as “99% L-valine” is not a health claim, but it must match the assay and basis. A ratio claim must match the measured amounts, not only the artwork. ## The document file Documents a brand should hold for an L-valine lot | Document | What it supports | Market | Batch certificate of analysis | Release against the specification, with methods and results | All | Specification | The agreed limits, methods and basis | All | Technical and safety data sheets | Solubility, mesh, handling, pack and hazard information | All | Allergen, GMO and animal-derived input statements | Composition and labelling declarations | EU, UK, US | Novel food or dietary ingredient statement | The market entry position for the form | EU, UK, US | Origin and manufacturer statement | Traceability and the source route | All | Heavy-metal and micro reports | The contaminant and hygiene envelope | All | Packaging and food-contact declaration | The pouch or drum in contact with the powder | EU, UK, US ## The checklist - Name the form and CAS 72-18-4; a BCAA blend is three ingredients. - Confirm the market entry position: EU Member State rules, the US pre-1994 basis, the UK retained position. - Set raw-material limits below the finished ceiling, including an arsenic limit. - Check the daily dose against the figures and, in the US, Proposition 65 levels. - Match the label name and amount to the certificate and PO. - Check every claim against the Register or the DSHEA route. - Collect documents against the lot number, not the product name. - Check the Member State notification rule and any Northern Ireland sale. The release tests behind the file are on the COA page; the form choice is on the grade page; identity evidence is on the identity page. The product hub carries the catalog specification, the market notes are in the EU, US and UK references, and the metals are described in the ICP-MS method note. ### 06 How we prove an L-valine lot is the L form URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-valine/identity/ Reviewed: 2026-11-19 An L-valine lot is proved in layers: the record names the material, infrared and ninhydrin confirm the functional groups, specific rotation assigns the L configuration, and HPLC separates valine from leucine and isoleucine. Titration alone cannot do it, because the isomers and a DL mixture consume titrant in the same proportion. In one lineThe rotation assigns the configuration, the chromatogram separates valine from its isomers, and the titration only measures how much amino acid is present. ## Four layers of identity A certificate becomes identity evidence only when the layers agree on the same lot. Work from the paper record to the instrument, then to the configuration, then to the powder. Identity layers for L-valine and what each one misses | Layer | What it answers | Check | What it cannot show | Record | What the lot is meant to be | Name, CAS 72-18-4, formula, lot code | Nothing about the drum | Substance | Whether the molecule is valine | IR, ninhydrin, HPLC retention | D and L look the same | Configuration | Whether it is the L form | Specific rotation, chiral HPLC | Quantity; a small D excess | Form and purity | Whether the powder matches the specification | Titration assay, loss on drying, residue, pH, mesh | Configuration Titration counts acid–base equivalents, so it measures how much amino acid is present, not which one. HPLC separates valine from leucine and isoleucine and shows whether the main peak is the named amino acid; the two methods answer different questions. Start with the assay and you are looking at the one number compatible with every failure: 100% can be a racemate, a different amino acid or a blend. ## Specific rotation and the L configuration Specific rotation is the optical signature. Divide the observed rotation by the cell path in decimetres and the concentration in grams per millilitre, then compare the result with the pure enantiomer under the same conditions. The catalog range is +26.6° to +28.8° on the dried basis. The certificate should state solvent, concentration, temperature and path length, because the reading moves with all four. The sign and magnitude are the first evidence. L-valine reads positive; D-valine reads negative, and a DL mixture sits near zero. A few per cent of D pulls the reading toward zero and may still sit inside the window. Rotation is a practical gate for bulk configuration, not an enantiomeric purity grade. Where the risk assessment needs the D figure, add chiral HPLC. A chiral method separates the enantiomers and reports D-valine with a detection limit. “D-valine not detected” without that limit describes the method's sensitivity, not the sample. pH is not a configuration test. A 5% solution at 5.5–6.5 is consistent with the free amino acid near its isoelectric point; a shift points to residual acid or alkali, a different salt or a blend. ## The solid state, IR and XRD Infrared reads the functional groups: carboxylate, ammonium and the isopropyl side chain. It can help distinguish valine from leucine and isoleucine in the fingerprint region, and it is the routine identity test. It does not separate L from D, because the enantiomers have the same functional groups. X-ray diffraction reads the crystal lattice. A crystalline lot gives a pattern that can be compared with a reference, which is useful when a milled or granulated lot is suspected of being a different solid form or a blend with a crystalline diluent. It is not a configuration test: the enantiomers share a powder pattern, and XRD is not a routine release test for valine. Particle size and pH finish the picture. The standard grade is ≥95% through 40 mesh; a milled or granulated lot should carry its mesh in the specification. pH is a solution check and mesh a physical one. Neither is identity on its own. ## The substitution routes Substitution routes for L-valine and the test that catches each | Route | Signature | Test that catches it | D-valine or a DL mixture | Rotation moves toward zero; assay unchanged | Specific rotation, chiral HPLC | Leucine or isoleucine | Same titration equivalents; different retention | HPLC, IR, rotation | A BCAA blend sold as free valine | Valine assay low; the other two amino acids appear | HPLC profile, assay, label | A carrier or a salt | Residue, pH or assay moves with the diluent | Residue on ignition, pH, assay, IR The first route is the one an assay cannot see. D-valine has the same molecular weight and the same acid–base groups as L-valine; only rotation or a chiral method separates them. Leucine and isoleucine are the quieter risk: they are legitimate ingredients, but they are not valine and they lift the titration. A blend sold as free valine is a label failure before it is an adulteration. Rotation alone can be matched by another L-amino acid or a formulated blend, so read it with the chromatogram. A rotation inside +26.6° to +28.8° says the dominant species behaves like L-valine; it does not say the drum is only valine. ## How to write the specification line An enforceable specification fixes the molecule, the configuration and the basis at once. A workable line reads: “L-valine, CAS 72-18-4, 98.5–101.5% on the dried basis by titration; specific rotation +26.6° to +28.8° on the dried basis; identification by IR and ninhydrin conforms; loss on drying ≤0.5%; residue on ignition ≤0.1%; pH (5% solution) 5.5–6.5; particle size ≥95% through 40 mesh; heavy metals Pb ≤3, As ≤2, Cd ≤1, Hg ≤0.1 mg/kg; APC ≤1,000 cfu/g, yeast and mould ≤100 cfu/g, E. coli and Salmonella absent.” Three clauses carry the weight. “L-valine” excludes a blend and the D form. “Dried basis” blocks a silent water correction. The rotation sits in the release tests, not in a side conversation, because an unwritten limit disappears when the supplier changes. Add a chiral D-valine limit where the risk assessment calls for it. Add the mesh for a milled or granulated lot; the certificate is judged against the specification, so every identity test should appear in it. ## Five questions to put to a supplier - Do the certificate and the pack name L-valine, the free amino acid, with CAS 72-18-4? - What rotation did this lot give, in which solvent, at what concentration and temperature, and on which basis? - What D-valine figure did a chiral method return, and what detection limit applies? - Which assay method and standard gave the result, and is it on the dried basis? What are the loss on drying, residue and pH? - Can you send the infrared spectrum, the HPLC chromatogram and the metals and micro results for this lot? The certificate that should carry those answers is described on the COA page; the forms are compared on the grade page; the ratio arithmetic is on Valine in BCAA ratios. The product hub carries the catalog specification, the separation is explained in the HPLC method note, and assay is defined in the glossary. ### 01 What the COA for L-lysine hydrochloride actually contains URL: https://nutrition.rainwoodbio.com/products/amino-acids/lysine/coa/ Reviewed: 2026-11-19 The certificate for an L-lysine hydrochloride lot reports appearance, identification by IR and ninhydrin, assay by titration on the dried basis, specific rotation, chloride, pH, loss on drying, residue on ignition, particle size, the heavy-metal panel and microbiology. Each line names the test, method and release limit. The figures are catalog specifications; the lot COA confirms a pack, and no batch result appears here. In one lineThe certificate has to show the assay basis, the chloride and the rotation together, because no one of them proves the hydrochloride on its own. ## The certificate as a test report A certificate can be audited when each row answers three questions: what was measured, how, and against which limit. A pass mark without a method is a conclusion without evidence; a result column filled with the specification range is not a lot record. Identity, assay and physical limits · L-lysine hydrochloride | Parameter | Method | Release limit | Appearance | Visual | White crystalline powder | Identification | IR and ninhydrin reaction | Conforms to reference | Assay | Titration, dried basis | 98.5–101.5% | Specific rotation | Polarimetry, dried basis | +20.4° to +21.4° | Chloride | Argentometric titration or ion chromatography | 19.0–19.6% | pH (5% solution) | Potentiometry | 5.0–6.0 | Loss on drying | Gravimetric | ≤0.5% | Residue on ignition | Gravimetric | ≤0.1% | Particle size | Sieve analysis | 40 mesh nominal Contaminant and microbiological limits | Parameter | Method | Release limit | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent ## Titration, HPLC and the dried basis The release assay is a titration, reported as the hydrochloride on the dried basis. “Dried basis” means the loss on drying is measured and the assay is corrected to the dried material. An as-is figure equals the dried-basis result multiplied by one minus the LOD fraction: a lot at 100.0% on the dried basis with 0.4% LOD carries 99.6% as-is. That difference is small at the catalog limit, but it matters when a wet lot passes the dried-basis gate while the powder in the drum contains less salt. HPLC is the second view. L-lysine has no strong ultraviolet chromophore, so the method usually relies on pre-column derivatisation or on ion-exchange separation with ninhydrin detection. The certificate should name the column, the detector, the derivatisation and the sample preparation. HPLC separates lysine from other amino acids; an ordinary achiral column will not separate D-lysine from L-lysine. The specific rotation, or a chiral HPLC method, answers that question. Titration and HPLC should be compared on the same basis. Agreement within the methods' uncertainty is consistent with a single amino acid at the stated content. A persistent gap is a finding: a high titration with a low HPLC result can point to a titratable impurity or a derivatisation problem, while a low titration with a high HPLC result can point to water or a non-titratable diluent. The chloride figure is an identity term, not a purity term. The hydrochloride contains 19.41% chloride by mass, calculated from 35.45 g/mol of chloride and 182.65 g/mol of the salt; the 19.0–19.6% window is consistent with that structure. A lot with no chloride cannot be the hydrochloride, however high the lysine assay reads. The rotation is the L check: +20.4° to +21.4° on the dried basis, with the solvent, concentration, temperature and wavelength stated. A rotation without conditions is not comparable with another laboratory's figure. ## Release limit versus batch result The release limit is the boundary used to accept the lot; the batch result is what the laboratory measured on that lot. Both belong on the certificate, in separate columns, with the method beside them. A result column that repeats the specification range has not reported a lot; it has reported the specification. Loss on drying is not a formality. Because the assay is on the dried basis, a high LOD is corrected out of the assay and can leave a powder that passes while carrying more water than the process can tolerate. Chloride and rotation deserve the same reading: “conforms” is a conclusion, but the numeric result is what shows the salt and the L form. If the certificate shows only pass or fail, ask for the raw result, the method and the basis. ## What moves between batches Assay, chloride and rotation move with the route, the crystallisation and the drying step. A true hydrochloride should keep chloride close to the theoretical figure and rotation inside the L window from lot to lot; a drift in either is more interesting than one result near an edge. pH moves with residual acid or free base, loss on drying moves with the dryer and the pack, and milling changes the particle-size distribution and flow rather than the chemistry. Colour and flow are less quantitative and often more revealing: a cream or tan tint can point to a hot drying step or a trace of iron while the assay still passes. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a form claim the supplier's certificate does not prove, or a disputed result. The useful panel is specific rotation, chloride, assay by titration, an amino-acid profile by HPLC, loss on drying, ICP-MS for the heavy metals and the microbiological set, all on one submitted sample. IR is worth adding when the molecular identity is in question. Ask the laboratory to report its detection and quantification limits, not only “not detected”. A “not detected” line without a limit describes the method's sensitivity, not the sample. Chain of custody matters: the sample tested should be the sample retained, and the lot code should travel with it. ## What to compare between suppliers Two quotations that both say 99% can describe different salts, different bases and different test packages. Compare the lines that change the material. Lines to compare on an L-lysine hydrochloride certificate | Line | What to ask | Why it changes the comparison | Form and CAS | L-lysine hydrochloride, 657-27-2 | Separates the salt from the base and from DL-lysine | Assay and basis | Titration, dried basis, calculated as the salt | An as-is or lysine-basis figure is a different number | Specific rotation | Result and conditions | Shows the L form and the optical purity | Chloride | Numeric result and method | Shows the hydrochloride counter-ion | LOD and pH | Result and method | Shows water and residual acid or base | Particle size | 40 mesh or the agreed distribution | Changes flow, fill and blend uniformity | Metals and microbiology | Results against the catalog limits | Shows the lot, not the product family | Traceability | Lot code, manufacturer, retained sample | Shows that the paper belongs to the pack The catalog specification sits on the L-lysine hydrochloride product page. The form comparison is on the grades page; the salt evidence is set out on the identity page; the release workflow is on the quality page. The separation method is described in the HPLC method note, and the moisture test in the loss-on-drying note. ### 02 L-lysine HCl or L-lysine base: choosing a grade URL: https://nutrition.rainwoodbio.com/products/amino-acids/lysine/grades/ Reviewed: 2026-11-19 L-lysine is sold as the hydrochloride and as the free base, and the two are different label ingredients. The hydrochloride is about 80.0% lysine and 19.4% chloride, with a 5% solution at pH 5.0–6.0; the base carries the full lysine mass and is alkaline. The dosage form, the fill weight, the pH the matrix can carry and the name on the label decide which one fits. In one lineThe label and the dosage form choose the form; the assay percentage on the quotation does not. ## Why “L-lysine” is not a specification The base and the hydrochloride share the lysine entity but not the molecular weight, the counter-ion, the solution pH or the label name. L-lysine hydrochloride is CAS 657-27-2, C6H14N2O2·HCl, 182.65 g/mol. L-lysine base is CAS 56-87-1, C6H14N2O2, 146.19 g/mol. A certificate for one does not describe the other, and a formulation weighed for one will be wrong if the other arrives. The second axis is physical form. The catalog grade is a crystalline powder at 40 mesh; an 80 mesh milled grade and a granulated grade are available on request. Mesh changes flow, dust and blend uniformity, not chemistry. Write both axes into the specification: the chemical form and the particle size. ## Hydrochloride and base side by side What changes between L-lysine hydrochloride and L-lysine base | Line | L-lysine hydrochloride | L-lysine base | Label name | L-lysine hydrochloride | L-lysine | CAS | 657-27-2 | 56-87-1 | Formula and molecular weight | C6H14N2O2·HCl · 182.65 | C6H14N2O2 · 146.19 | Lysine per gram | About 0.80 g | 1.00 g | Chloride per gram | About 0.194 g | None as the counter-ion | pH (5% solution) | 5.0–6.0 | Alkaline; well above the salt's window | Moisture and handling | Hygroscopic crystalline powder; keep sealed | More hygroscopic and less free-flowing | Assay basis | 98.5–101.5% by titration, dried basis, as the salt | The base's own specification, as the base | What the label declares | The hydrochloride, with the lysine figure calculated from it | L-lysine, with no chloride load The table is not a ranking. Each form has a job, and the job is set by the formula and by the label the brand intends to print. ## pH, hygroscopy and the chloride load The hydrochloride is the salt of a basic amino acid, and its 5% solution sits at pH 5.0–6.0. That near-acidic window is part of the specification, not an incidental reading. The free base is the alkaline form; a solution sits well above the salt's window, and an acidic component in the blend will neutralise it. If the base has taken up carbon dioxide from the air, an acidic, sealed pack can release that gas and change the pack, so the base is a poor fit for an acidic, water-containing formula with no headspace. Both forms dissolve freely in water, so solubility seldom decides the choice. Moisture handling does. The hydrochloride is hygroscopic and must stay in a sealed liner; the base is more hygroscopic and less free-flowing, which makes weighing and blending harder. The salt also brings about 19.4% chloride by mass. That chloride is useful as an identity check on the certificate, but it is dead weight in a capsule: the same lysine dose needs more hydrochloride than base. Particle size is the third physical variable. The 40 mesh catalog grade flows well for capsule filling and blending; an 80 mesh grade disperses faster but can dust more; a granulated grade reduces dust and improves flow with a different dissolution profile. None of these changes the form or the label. ## What the form does to the dose The conversion is arithmetic. One gram of the hydrochloride delivers about 800 mg of lysine; to declare 1,000 mg of lysine from the salt, a formulator needs about 1,250 mg. A 500 mg capsule of the salt carries about 400 mg of lysine, so a label that says “L-lysine hydrochloride 500 mg” is not declaring 500 mg of lysine. Lysine declared and hydrochloride weighed | Declaration | Hydrochloride needed | Lysine delivered | 250 mg lysine | About 312 mg | 250 mg | 500 mg lysine | About 625 mg | 500 mg | 1,000 mg lysine | About 1,250 mg | 1,000 mg | 500 mg hydrochloride | 500 mg | About 400 mg The difference lands on the fill weight. A capsule with a tight fill may not have room for the extra 25% of salt, while a stick pack or a drink mix usually does. In a tablet, the alkaline base can affect the granulation pH and the choice of excipients; the salt is easier to run in a conventional wet granulation, but it still needs a moisture-controlled process. In a gummy or a chew, the water activity and the heat step matter more than the form alone. The dose decision should be written before the purchase order, not after the first trial. ## What to write into the specification - “L-lysine hydrochloride, CAS 657-27-2, C6H14N2O2·HCl; not L-lysine base.” - “Assay 98.5–101.5% by titration on the dried basis, calculated as the hydrochloride.” - “Specific rotation +20.4° to +21.4° on the dried basis; chloride 19.0–19.6%; pH (5% solution) 5.0–6.0.” - “Loss on drying ≤0.5%; residue on ignition ≤0.1%; heavy metals and microbiology as on the catalog specification.” - “Particle size 40 mesh, or the agreed 80 mesh or granulated distribution.” - “Label declaration to name the hydrochloride and to state whether the quantity is the salt or the lysine.” The specification is form-specific. A range copied from the base and applied to the salt is not a specification; it is a template with the wrong noun. The assay basis, the chloride line, the rotation and the pH range all change with the form. ## When the other form is the wrong answer Do not choose the base for an acidic, sealed powder if the formula has no room for the carbon dioxide the base can carry. Do not choose the hydrochloride when the label has to read “L-lysine” and the dose is expressed as lysine, unless the artwork is changed to match the salt. Do not switch forms to fix a flow problem: mesh and granulation are the tools for flow, and changing the salt to solve a hopper creates a labelling problem instead. The catalog form is the hydrochloride at 40 mesh. The product hub carries the specification; the COA page shows how each line is reported; the hydrochloride-versus-base page works through the dose and label arithmetic; the stability page covers moisture and packaging; the compliance page covers the label rules. ### 02.1 L-lysine HCl vs L-lysine base: dose, pH and the label URL: https://nutrition.rainwoodbio.com/products/amino-acids/lysine/grades/lysine-hcl-vs-base/ Reviewed: 2026-11-19 L-lysine hydrochloride and L-lysine base deliver the same lysine entity, but not the same mass, pH or label. The salt is about 80.0% lysine and 19.4% chloride; the base carries the full lysine mass and is alkaline. A formula that switches form without recalculating the dose and the label is a different product. In one lineThe same lysine dose needs about 25% more hydrochloride than base, and the label has to say which form was weighed. ## Two forms, two specifications The hydrochloride is a crystalline salt with a counter-ion; the base is the free amino acid. They have separate CAS numbers, separate molecular weights and separate certificate lines. The hydrochloride is the catalog form here, at 40 mesh. The base is a different material, not a stronger grade of the same powder. L-lysine hydrochloride and L-lysine base at a glance | Line | Hydrochloride | Base | Label name | L-lysine hydrochloride | L-lysine | CAS | 657-27-2 | 56-87-1 | Formula and molecular weight | C6H14N2O2·HCl · 182.65 | C6H14N2O2 · 146.19 | Lysine per gram | About 800 mg | 1,000 mg | Chloride per gram | About 194 mg | None as the counter-ion | pH (5% solution) | 5.0–6.0 | Alkaline | Handling | Hygroscopic; sealed liner | More hygroscopic; less free-flowing The assay basis is the line that causes most confusion. The hydrochloride specification is 98.5–101.5% by titration on the dried basis, calculated as the salt. A certificate that says “lysine 99%” is describing a different basis from one that says “L-lysine hydrochloride 99%”. A figure near 80% on the lysine basis can be the same material as a figure near 100% on the salt basis. ## The dose arithmetic Convert with the molecular weights, not with the assay percentages. Lysine base is 146.19 g/mol and the hydrochloride is 182.65 g/mol, so one gram of the salt carries 146.19 ÷ 182.65 = 0.800 g of lysine. The inverse is 1.25: one gram of lysine needs 1.25 g of the hydrochloride. The chloride share is 35.45 ÷ 182.65 = 19.4%. Label declaration and the hydrochloride weight | What the label declares | Hydrochloride to weigh | Lysine in the dose | 250 mg L-lysine | 312 mg | 250 mg | 500 mg L-lysine | 625 mg | 500 mg | 1,000 mg L-lysine | 1,250 mg | 1,000 mg | 500 mg L-lysine hydrochloride | 500 mg | 400 mg Both directions matter. A brand that wants a 500 mg lysine claim needs 625 mg of the salt per serving; a brand that has a 500 mg capsule of the salt can declare about 400 mg of lysine. The salt weight is 25% above the lysine figure, and the lysine figure is 20% below the salt weight. ## pH, moisture and the matrix The salt solution is slightly acidic at pH 5.0–6.0. The base solution is alkaline, and that difference is the first physical constraint on the formula. An acidic ingredient, a buffered drink or a sealed sachet will react with the base and shift the finished pH; the salt pulls the same formula toward pH 5–6. Neither form is pH-neutral, and the finished-product pH should be measured rather than assumed from the ingredient. Moisture is the second constraint. The hydrochloride is hygroscopic and needs a sealed liner; the base is more hygroscopic and less free-flowing. In a capsule or tablet, the salt's crystalline 40 mesh powder is easier to blend and fill. In a stick pack or a drink mix, both forms dissolve, but the chloride load and the pH change the taste and the acid balance. In a gummy or a chew, the water activity and the heat step decide how the form behaves in the process. ## Which dosage form fits which A capsule or tablet with a tight fill is the clearest case for the base: it carries 25% more lysine per milligram, so the same dose occupies less volume. The trade-off is the alkaline surface, the hygroscopy and the label name. A conventional wet granulation is usually easier with the hydrochloride, because the salt is crystalline and less alkaline, but the granulation still needs a moisture limit and a drying step. A powder stick or a drink mix usually fits the hydrochloride: it is freely soluble, the pH is already near 5–6, and the chloride is part of the label arithmetic. A base in an acidic drink neutralises the acid and can change the flavour and the acid balance. A gummy or a chew needs a trial with the real matrix, because the water activity, the heat and the other acids decide the result more than the form alone. In every case, the form is chosen with the fill weight and the label in view, not after the formula is fixed. ## What the label has to say In the EU, the ingredient list names the form used. If the drum is L-lysine hydrochloride, the list says L-lysine hydrochloride; “L-lysine” alone does not describe the salt. The same rule applies in Great Britain under the retained food information rules, and Northern Ireland follows the EU text. A quantitative statement should say whether the figure refers to the salt or to lysine; otherwise the reader cannot reproduce the dose. In the US, the Supplement Facts panel declares the dietary ingredient as “L-lysine (as L-lysine hydrochloride)” and the amount is the lysine figure, not the salt figure. The salt is named in the parenthetical. If the label wants to declare the salt weight, that is a separate statement and should be worded so it cannot be read as the lysine amount. There is no Daily Value for lysine, so no percentage is shown. The claim boundary is separate from the name. In the EU and the UK, a health claim must be authorised in the register; as of this review no L-lysine claim is listed, so the label should not carry one. In the US, a structure/function statement is possible with substantiation and the DSHEA disclaimer, but it cannot be a disease claim. A compositional statement such as “L-lysine hydrochloride 500 mg” is not a health claim, but it still has to match the certificate and the basis. ## When to choose which Choose the hydrochloride when the label can name the salt, the formula can carry the chloride and the pH 5–6, and the fill weight has room for the extra 25%. It is the simpler material for a crystalline blend, a stick pack or a drink mix, and its chloride and rotation give the certificate a clear identity check. Choose the base when the dose must fit a small capsule or tablet, the formula is not acidic, and the label is written for L-lysine rather than the salt. Choose neither without a trial when the matrix is a sealed acidic powder, a high-water gummy or a heated chew. The form changes the pH, the water uptake and the label, and those three changes belong in the trial protocol. The product hub carries the hydrochloride specification; the grades page compares the forms for grade selection; the COA page shows the certificate lines; the compliance page covers the market rules; the stability page covers moisture and shelf life. ### 03 L-lysine HCl is stable dry; moisture and the matrix decide the rest URL: https://nutrition.rainwoodbio.com/products/amino-acids/lysine/stability/ Reviewed: 2026-11-19 Dry L-lysine hydrochloride is a crystalline salt, and in a sealed pack it is durable. The failure modes are moisture pickup, heat and a reducing sugar in the matrix, and pH in solution. The pack and the formula set the shelf life; the assay on its own does not. In one lineSealed and dry, the salt is durable; moisture, heat and a reducing sugar in the matrix are what shorten the shelf life. ## Dry stability and the moisture headroom The catalog limit for loss on drying is ≤0.5%, and that figure is more than a purity line. It is the moisture headroom in the pack. The salt is hygroscopic: an open pouch, a drum liner that is not resealed or a humid dose room will let it pick up water. The first visible result is caking, and a caked powder no longer flows through a hopper or disperses evenly in a stick pack. The assay can still pass on a dried basis because the water is corrected out, which is exactly why LOD has to be read as its own line. The dry powder is not a significant reaction medium until water is present. Keep the pack closed, keep the dose room below the humidity at which the powder picks up water, and specify the liner. A desiccant can help a 1 kg pouch, but it is not a substitute for an intact liner on a 25 kg drum. The drum should be resealable after sampling, and the sample should be taken quickly and the liner closed before the powder has time to equilibrate with the room. ## In solution: pH, heat and microbiology L-lysine hydrochloride is freely soluble in water, and a 5% solution sits at pH 5.0–6.0. That is convenient for a drink mix or a liquid, but a solution is a different stability environment from a powder. Water activity, pH and microbial load become the limiting factors. An unpreserved solution held at room temperature is a microbiological risk regardless of the lysine assay, and a heat step adds the browning reaction if a reducing sugar is present. Lysine carries a reactive side-chain amino group, and reducing sugars can react with it under heat. The result is colour and flavour drift before the assay moves. pH shifts the rate: the reaction is faster as the system becomes more alkaline, so a beverage's pH and buffering capacity belong in the trial. The salt's own pH 5–6 is a starting point, not a guarantee that the finished drink will stay there after the acids, buffers and minerals are added. Measure the finished pH before and after the heat step. ## What moves the powder and the blend Stability factors for L-lysine hydrochloride powder and blends | Factor | Effect | Control | Moisture | Caking; enables browning chemistry | Intact liner; low-humidity dose room; LOD limit | Heat and time | Faster colour and flavour change in a matrix | Set the process temperature and time on the real blend | Reducing sugars | Browning and flavour drift | Choose carriers and flavours with a low free-sugar load | pH | Alkaline conditions accelerate browning | Measure and control the finished-product pH | Trace metals | Can catalyse colour formation | Specify heavy metals; check process water and equipment | Microbiology | Growth in a wet or poorly preserved system | Water activity, preservative system, micro limits | Particle size | Fines pick up moisture and dust faster | Choose 40 mesh, 80 mesh or granulation for the process | Pack integrity | Moisture ingress and caking in transit | Liner, closure, drop test and resealable drum Oxygen and light are lower on this list than for a vitamin or a fatty acid. The lysine molecule has no sensitive chromophore or labile double bond, so the pack is mostly a moisture barrier. The exception is a blend: the other ingredients can be light- or oxygen-sensitive, and the pack has to protect the weakest component, not the lysine alone. ## A stability protocol that answers the question Run the study on the packed material, not only on the powder in a laboratory jar. Use at least two pack sizes if the 1 kg pouch and the 25 kg drum will both be sold, and include an open-pack condition to measure moisture pickup. Store at the intended condition and at an accelerated condition; a common pair is 25 °C/60% RH for real time and 40 °C/75% RH for acceleration, with the exact design set by the product and the market. Test assay, LOD, pH where the product is a solution, appearance and colour, microbiology and flavour or odour at each time point. Five points across the intended shelf life are more useful than one end point. Add an in-matrix sample, not only the neat powder. A stick pack with a fruit powder, a tablet with an acidic granulation or a gummy with a reducing-sugar syrup will show the colour and flavour change that the neat powder does not. Photograph the colour against a standard; “slightly darker” is not a result. If the matrix contains a reducing sugar, include a stress sample held at the process temperature for the process time. ## Formula and pack decisions At the formula stage, the question is which ingredients bring water and reducing sugars. Fruit powders, honey, some maltodextrins, caramel colours and certain flavours can carry free glucose or fructose. A sugar-free claim is not the same as a reducing-sugar-free formula. Choose carriers and flavours with a low free-sugar load, keep the water activity low, and control the heat step. If the formula is acidic, check the finished pH after the lysine salt is added; the salt is slightly acidic, and the acid system may need to be adjusted. At the pack stage, the 1 kg foil pouch and the 25 kg fiber drum are the catalog formats. Both need an intact liner and a closure that survives transport; the drum should be resealable after sampling. The storage statement on the label should match the pack and the climate, and the batch record should show the pack and the lot code. A more humid destination may need a stronger liner or a smaller pack, not a longer shelf life. ## Shelf life and the early warnings The catalog specification does not assign a shelf life; the packed-product data does. A shelf life is supported by real-time results on the same pack, closure and formula, with accelerated data as supporting evidence, not as the only evidence. Do not extend a shelf life because the assay still passes: caking, colour and flavour can fail before the titration moves. The early warnings are LOD climbing, lumps forming, a cream or tan tint, and a flavour shift in a sweet blend. Any of those should trigger a retest and a look at the pack and the storage history. The product page gives the catalog form; the COA page shows the LOD line; the grade page covers mesh and granulation; the loss-on-drying note explains the test; the quality page covers release and retest. ### 04 L-Lysine HCl: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/amino-acids/lysine/moq/ Reviewed: 2026-11-19 The minimum order for L-lysine hydrochloride is 1 kg, packed in a foil pouch; production volumes ship in 25 kg fiber drums. Catalog lead time is 1–7 days for a released lot. A quotation needs the form, the quantity, the pack, the mesh, the destination and the documents. In one lineOne kilogram drawn from a released lot is the qualification unit; the drum, the mesh and the destination shape the rest of the order. ## Why the minimum is 1 kg One kilogram is the qualification unit, not a retail pack. It is enough to run a bench trial, make a pilot batch, keep a retained sample and send a portion to an outside laboratory. It is also small enough to be drawn from a released lot, so the sample and the later drum can carry the same specification and the same test panel. The minimum is a quality decision before it is a commercial one. A smaller scoop from a drum would not give the same traceability. A 1 kg pouch can be labelled with the lot code, sealed and retained; a repack from an unknown drum cannot. If the trial succeeds, the commercial order can move to the 25 kg drum with the same form, mesh and specification. ## Packs and labelling Catalog packs and formats for L-lysine hydrochloride | Pack or format | Typical use | What to check | 1 kg foil pouch | Trial, sample, small batch | Seal, liner, lot code, storage statement | 25 kg fiber drum | Production | Inner liner, closure, net weight, transport integrity | 40 mesh crystalline powder | Capsule filling and blending | Distribution, flow, dust | 80 mesh milled or granulated | Faster dispersion or lower dust | Specification line and lead time The foil pouch is the moisture barrier; the drum is the handling unit. In both cases the liner is part of the pack, not a detail. Ask for a photo of the packed unit and the label before shipment if the material is going into a regulated file. The label should carry the product name, the form, the lot code, the net weight and the storage statement, and the certificate should carry the same lot code. ## Lead time and what moves it The catalog lead time is 1–7 days for a released lot. The clock starts when the form, the specification, the quantity and the documents are clear; a query about the assay basis or the chloride limit restarts it. A non-standard pack, an 80 mesh milled grade, a granulated grade or a destination that needs a specific certificate or statement adds time. Lead time is not a promise about a future production lot. If the grade is not in stock, the schedule depends on the production run and the release testing, and that should be confirmed in the quotation rather than assumed from the catalog figure. The same applies to a label with a customer-specific lot code or a consignee mark. ## Six details a quotation needs What to send with a quotation request | # | Detail | Why it changes the answer | 1 | Form and CAS | L-lysine hydrochloride 657-27-2, not the base | 2 | Quantity and pack | 1 kg pouch, 25 kg drum or a mixed schedule | 3 | Mesh and granulation | 40 mesh catalog, 80 mesh or granulated on request | 4 | Destination and delivery term | Sets the documents and the transport route | 5 | Documents and tests | COA, statements, third-party report, sample retention | 6 | Required date | Separates a released lot from a production run Add the specification version if you have one. A quotation against a different assay basis, a different mesh or a different chloride limit is not comparable with the one you are holding. ## Samples and retained samples A 1 kg order can serve as the sample. Ask for the lot code, the batch COA and the pack label with it, and keep a portion sealed as the retained sample. The sample should come from the same lot as the commercial pack, not from a separate “sample stock” with no traceability. If the sample goes to an outside laboratory, record the lot code, the date and the tests requested. The laboratory's report and the supplier's certificate should describe the same material; if they do not, the lot code is the first thing to check. The retained sample should be kept under the same storage condition as the commercial pack, because a sample held in a drawer does not represent the drum. ## Terms that belong in the purchase order The quality terms should be in the purchase order, not only in the quotation: the specification version, the form, the mesh, the pack, the lot code on the certificate, the documents required with each shipment, the storage statement, the retest or shelf-life basis, and the procedure for a nonconforming lot. Delivery terms, payment terms and title are commercial terms and belong in the same document. Agree what happens if a result is disputed: which retained sample is used, which laboratory is the referee, and who holds the sample. A clear term before the first drum is simpler than a dispute after it. The product page carries the catalog packs; the COA page shows the test lines; the compliance page lists the documents; the MOQ note defines the term; the lead-time note explains the clock. ### 05 Where L-lysine HCl is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/amino-acids/lysine/compliance/ Reviewed: 2026-11-19 L-lysine hydrochloride is permitted as a food supplement ingredient in the EU, US and UK, but each market answers four questions separately: whether the form is permitted, which contaminant limits apply, what the label says and what may be claimed. In the EU an amino acid sits outside the harmonised vitamin and mineral lists, so general food law and member-state rules decide; the US regulates it as a dietary ingredient; the UK applies the retained framework. In one linePermission, contaminant limits, label wording and claims are four separate checks, and the file has to answer each one for the market. ## Three markets, three instruments The routes are not interchangeable, and a label that is correct in one market can fail in the next. Which instrument controls what · L-lysine hydrochloride | Market | Main instruments | What they settle | European Union | Regulation (EC) No 178/2002; Directive 2002/46/EC; Regulation (EU) 2023/915; Regulation (EU) No 1169/2011; Regulation (EC) No 1924/2006 | Food use, supplement labelling, contaminant limits, claims | United States | FD&C Act section 201(ff); 21 CFR 111; 21 CFR 101.36; 21 CFR 582.5411 | Dietary ingredient status, cGMP, Supplement Facts, GRAS food use | United Kingdom | Retained food law; Food Supplements (England) Regulations 2003; Food Information Regulations 2014; GB claims register | GB food use, labelling, limits, claims; Northern Ireland follows the EU Sourcing reference, not legal advice. ## The European Union: an amino acid outside the positive lists Annexes I and II to Directive 2002/46/EC list the vitamins and minerals permitted in food supplements and the forms in which they may be used. L-lysine is neither a vitamin nor a mineral, and the hydrochloride is not in those annexes. Permission and any level for an amino acid come from general food law and from the member state where the product is sold. Member states may set a maximum, require notification or restrict a form. The novel food question is separate. L-lysine has a documented food history before 15 May 1997; the file should document it rather than assume it. Labelling follows Regulation (EU) No 1169/2011, and L-lysine has no Nutrient Reference Value, so no percentage of an NRV can be shown. The ingredient list should name the hydrochloride, not “L-lysine” alone. ## The United States: a dietary ingredient and a GRAS food substance In the US, L-lysine is a dietary ingredient under section 201(ff) of the FD&C Act. A pre-1994 marketing history is normally the basis; the supplier's file should say which. For food use, lysine is also generally recognized as safe under 21 CFR 582.5411, which covers L- and DL-forms and does not distinguish the salt from the base. Under 21 CFR 111 the manufacturer must test the identity of each component on receipt. The Supplement Facts panel is set by 21 CFR 101.36: it declares “L-lysine (as L-lysine hydrochloride)” and the amount is the lysine figure, not the salt figure. Lysine has no Daily Value, so no percentage is shown. A structure/function statement is possible with substantiation and the DSHEA disclaimer in 21 CFR 101.93; a disease claim is not. ## The United Kingdom: retained rules, with Northern Ireland apart The Food Supplements (England) Regulations 2003 set permitted vitamins and minerals in Schedules 1 and 2. Amino acids are not in those schedules, so L-lysine hydrochloride follows general food law in Great Britain, with the retained food information and novel food frameworks. The Food Information Regulations 2014 apply the labelling rules, and the GB claims register lists the permitted wording. Northern Ireland continues to apply the EU rules under the Windsor Framework. ## Contaminants: specification against law Three heavy-metal limits coincide with a legal maximum for food supplements. A limit at the maximum leaves nothing for analytical uncertainty. Catalog limits and the legal position for food supplements | Parameter | Catalog limit | EU and GB position, as of this review | US position | Lead (Pb) | ≤3 mg/kg | 3.0 mg/kg maximum; the catalog sits at the line | No federal limit; Proposition 65 exposure model | Cadmium (Cd) | ≤1 mg/kg | 1.0 mg/kg maximum; the catalog sits at the line | No federal limit; specification limit | Mercury (Hg) | ≤0.1 mg/kg | 0.10 mg/kg maximum; the catalog sits at the line | No federal limit; specification limit | Arsenic (As) | ≤2 mg/kg | No harmonised maximum for supplements; the line is contractual | No federal limit; specification limit The limits apply to the finished supplement: a compliant powder can still exceed one if the daily dose is high or other ingredients add metals. In the US there is no federal lead maximum; California's Proposition 65 assesses exposure per daily dose, with a maximum allowable dose level of 0.5 µg/day for lead and a no-significant-risk level of 15 µg/day. ## Claims and the label name In the EU and the UK, health claims are governed by Regulation (EC) No 1924/2006 and its retained equivalents, and a claim must appear in the register before use. As of this review the EU register carries no authorised health claim for L-lysine, and the GB register should be checked for the same wording. A compositional statement such as “L-lysine hydrochloride 500 mg per capsule” must match the specification and the certificate. In the US the structure/function route is open with the disclaimer and rests on substantiation held by the brand owner; it does not extend to a disease, and the wording does not carry into the EU or UK register. If the drum is the hydrochloride, the EU ingredient list and the US parenthetical should say so. A label that says only “L-lysine” while the drum is the salt overstates the lysine by about 20% of the salt weight. The grades page and the hydrochloride-versus-base page work through that arithmetic. ## What the file must contain - A batch certificate that names the method and basis for each result, with the lot code matching the pack. - The versioned specification, naming the hydrochloride, the assay basis and the mesh. - A contaminant report with lead, cadmium, mercury and arsenic results against the limits above. - A safety data sheet and an allergen statement for the material and the pack. - A site and country-of-origin statement naming the actual producer. - An EU novel food statement documenting the pre-1997 use, and a US dietary ingredient statement. - A food-contact declaration for the pouch and liner, and a stability summary with the assigned shelf life. - Any halal or kosher certificate the destination requires. ## A short review checklist - Name the market, and for the EU the member state of sale. - Confirm that the specification, certificate and label name the hydrochloride. - Check the destination's level rule and notification requirement, not only the EU position. - Compare each contaminant limit with the legal maximum and write down the margin. - Check the label arithmetic: salt weight, lysine weight and chloride. - Test claim wording against the EU or GB register, or US substantiation. - Keep specification, certificate and label on one version and lot code. The framework for each market is on the EU regulatory page, the US page and the UK page. The release tests are on the COA page; the identity evidence is on the identity page; the product page carries the catalog specification. Annex II and heavy metals are defined in the glossary, and the site's position is set out in the editorial policy. ### 06 How we prove an L-lysine lot is the hydrochloride URL: https://nutrition.rainwoodbio.com/products/amino-acids/lysine/identity/ Reviewed: 2026-11-19 Identity is proven in four layers: the document set, the molecular spectrum, the chiral rotation and the quantitative and impurity panel. For the hydrochloride, the chloride and pH are the salt evidence, and the rotation is the L evidence. No single line proves the material; the layers have to agree. In one lineThe IR spectrum names the amino acid, the rotation names the L form, and the chloride and pH name the salt; the certificate needs all three. ## The four layers of identity What each identity layer proves and misses | Layer | Test | What it proves | What it misses | Document | Specification, COA, lot code | The lot is described and traceable | Whether the drum matches the paper | Spectrum | IR and ninhydrin | The functional groups match an amino acid | The counter-ion and the enantiomer | Chirality | Specific rotation | The L form and the optical purity | The salt and the exact content | Assay and impurity | Titration, HPLC, chloride, pH, LOD, residue, metals, micro | The content and what else is in the drum | A close analogue at low level if the HPLC method cannot separate it The assay layer has two views. Titration measures the acid–base content on the dried basis; HPLC separates lysine from other amino acids and reports its own figure. Compare the two on the same basis. A high titration with a low HPLC result can point to a titratable impurity that the chromatogram does not see; a low titration with a high HPLC result can point to water or a non-titratable diluent. An ordinary achiral HPLC method will not separate D-lysine from L-lysine, so it cannot replace the rotation. ## Specific rotation: the L-form check Specific rotation is the observed rotation divided by the path length and the concentration, corrected to the dried basis. The catalog range is +20.4° to +21.4°. The sign and the size of the figure carry the information: L-lysine hydrochloride rotates to the right, D-lysine rotates the other way, and a racemic DL mixture sits near zero. A lot that is cut with DL-lysine or D-lysine can keep a normal chloride figure and a normal titration, so the rotation is the line that catches it. The number is method-dependent. Solvent, concentration, temperature, wavelength and path length all change the observed rotation, and the certificate should state them. A result reported without conditions is not comparable with a result from another laboratory. The dried-basis correction matters too, because the specific rotation is defined on the dried material; a wet sample read as-is gives a different figure. Rotation is not a quantitative assay. A low result is a flag, not a measured D content, unless the method has been calibrated against known mixtures. A high result can come from another optically active amino acid, not from more lysine. Use the rotation with the chloride, the titration and the HPLC profile, and use a chiral HPLC method when the exact enantiomer ratio matters. ## Chloride, pH and the solid-state check The hydrochloride contains 19.41% chloride by mass, calculated from 35.45 g/mol of chloride and 182.65 g/mol of the salt. The catalog chloride range is 19.0–19.6%, which is consistent with the salt. The 5% solution sits at pH 5.0–6.0. Those two lines are the practical salt evidence: a base shows little or no chloride and an alkaline solution, while a chloride salt with the wrong cation can show a high chloride figure, a high residue or a different pH. Salt evidence on an L-lysine hydrochloride certificate | Test | What it shows | Reading | Chloride | The hydrochloride counter-ion | 19.0–19.6%; theoretical 19.41% | pH (5% solution) | Free acid or free base | 5.0–6.0 | Residue on ignition | Inorganic load | ≤0.1% | IR | Molecular identity | Conforms to reference | XRD | Crystal form | Not a routine release test XRD is not the routine identity test for this salt. The chloride and pH lines do the salt work, and IR does the molecular work. Reach for XRD when a supplier claims a specific crystal form, when a milled or granulated grade behaves differently from the reference, or when a dispute turns on the solid state. A clean XRD pattern does not replace the chromatogram or the rotation, and a missing pattern does not prove the material is not the salt. ## The adulterants that fit the assay Adulterants and the lines that catch them | Adulterant | Why it can pass a rough check | What catches it | L-lysine base | Same lysine entity; the titration can still read a lysine figure | Chloride low; pH alkaline; assay basis | D-lysine hydrochloride | Same formula, chloride and assay | Specific rotation; chiral HPLC | DL-lysine hydrochloride | Same formula, chloride and assay; the rotation is near zero | Specific rotation; chiral HPLC | Other amino acids | Similar acid–base behaviour and similar mass | HPLC amino-acid profile; IR; rotation | Sodium or ammonium chloride | Raises the chloride figure and the mass | Chloride high; residue; pH; ammonium test | Sulfate or carbonate salt | Contains lysine but not the hydrochloride | Chloride low; sulfate or carbonate test; residue | Water | The dried-basis assay corrects it out | Loss on drying; as-is assay The base is a likely substitution because it is a legitimate lysine material with more lysine per gram. It fails on the salt lines, not on the lysine line. D- and DL-lysine are the chiral substitutions: they keep the formula and the chloride and fail the rotation. Other amino acids are caught by the chromatogram, and inorganic chlorides by the chloride, residue and pH lines together. None of these is caught by a single assay. ## How to write the identity block - “L-lysine hydrochloride, CAS 657-27-2, C6H14N2O2·HCl, white crystalline powder.” - “Identification: IR spectrum conforms to the reference; ninhydrin reaction conforms.” - “Assay: 98.5–101.5% by titration on the dried basis, calculated as the hydrochloride; HPLC confirmatory result reported with column and detector.” - “Specific rotation: +20.4° to +21.4° on the dried basis, with solvent, concentration, temperature and wavelength stated.” - “Chloride: 19.0–19.6%; pH (5% solution): 5.0–6.0; loss on drying ≤0.5%; residue on ignition ≤0.1%.” - “Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg; microbiology as specified.” - “Composition statement: no added L-lysine base, D-lysine, other amino acids or inorganic chloride.” The composition statement turns the identity question into a specification. Sign it with the specification, not after a dispute. If the material is blended or granulated, name the other components and their amounts. ## Five questions for the supplier - Which IR reference and technique were used, and can you send the spectrum? - Which assay is the release method, on what basis, and what does the HPLC report show? - What are the specific rotation, chloride and pH results for this lot, with the method conditions? - Is the material a single L-lysine hydrochloride, or does it contain the base, D-lysine, another amino acid or an inorganic chloride? - Which lot code links the certificate, the pack and the retained sample? Five answers should agree with the certificate and with each other. The product page carries the catalog specification; the COA page shows where each test sits; the grade page covers the form; the hydrochloride-versus-base page works through the label arithmetic; the HPLC note explains the separation; the retained-sample note covers the chain. ### 01 What the COA for N-acetyl-L-cysteine actually contains URL: https://nutrition.rainwoodbio.com/products/amino-acids/n-acetyl-l-cysteine/coa/ Reviewed: 2026-11-18 The certificate for an N-acetyl-L-cysteine lot reports appearance, identification by infrared and a thiol reaction, assay by HPLC on the dried basis, specific rotation, loss on drying, residue on ignition, pH, particle size, the heavy-metal panel and microbiology. Each row needs the test, the method, the basis and the release limit, and the result column should carry the lot's own figures. The ranges on this page are the catalog specification; the batch COA is the document that confirms a particular pack. In one lineAn assay figure is not a specification: the certificate has to show the dried basis, the rotation and the thiol identity, and keep the release limit separate from the result. ## The certificate as a test report The two tables below are the catalog release limits; the batch certificate adds the measured result for the lot. A certificate earns its place when it can be audited line by line. For each parameter the reader needs three things: what was measured, which method produced the number, and which limit the lot was released against. A table that prints only a percentage and a tick is a summary, not a report. Identity, assay and water · N-acetyl-L-cysteine | Parameter | Method | Release limit | Appearance | Visual | White crystalline powder | Identification | Infrared and thiol reaction | Conforms | Assay (dried basis) | HPLC | 98.5–101.5% | Specific rotation (dried basis) | Polarimetry | +21.0° to +27.0° | Loss on drying | Gravimetric | ≤0.5% | Residue on ignition | Gravimetric | ≤0.1% | pH (1% solution) | Potentiometry | 2.0–3.0 Physical, contaminant and microbiological limits | Parameter | Method | Release limit | Particle size | Sieve analysis | ≥95% through 40 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent ## The assay is HPLC, and the basis is dried HPLC is the quantitative method named in the specification. The certificate should say more than “HPLC”: the column and mobile phase, the detector, the standard, the injection and the calculation. N-acetyl-L-cysteine has weak ultraviolet absorbance, so a method can measure the thiol at low wavelength or after derivatisation; the two are not interchangeable, and a result quoted without the method cannot be reproduced. Dried basis means the assay is corrected for water. The loss-on-drying limit is ≤0.5%, so the correction is small, but it is not zero: a 0.4% water figure and a 99.0% dried-basis result correspond to 98.6% as-is. The batch weight and any customer specification should use the same basis, or a small water figure becomes a small disagreement at the weigh-up. The specific rotation is reported on the same dried basis, and it needs its conditions: solvent, concentration in grams per millilitre, path length, temperature and wavelength. A figure of +24.0° without them is a number, not a measurement. The rotation is the configuration check for the L form; the thiol reaction and the infrared spectrum are the functional-group checks, and the assay is the quantity. One test does not replace another. ## Release limit versus batch result The release limit is the boundary for the lot. The batch result is what the laboratory measured on that lot. Both belong on the page, in separate columns, with the method beside them. If the result column repeats the release range, the lot has not been reported; the gate has simply been copied back. Not every line needs a range. Identification is a conforms or does-not-conform test, and loss on drying is a ceiling. The figures still matter: a water figure of 0.48% is inside the limit and 0.20% is more comfortable, and the difference may show up later in a sealed pouch or a drink mix. Specific rotation deserves a release decision, not a footnote. A reading below +21.0° is an identity failure, not a low-purity result; it says the L form is not the only optical species in the drum. The thiol reaction can be positive in cysteine as well, which is why the rotation and the infrared amide band are read together. “Passes specification” is a conclusion. The reader should be able to reach it from the numbers on the page. ## What moves between batches Assay and water move with the acetylation, crystallisation and drying steps. Rotation usually sits well inside its window, but a result near the floor is worth a second look. pH tracks residual acid or base from the work-up, and particle size tracks the mill and the sieve. Oxidation is the quieter variable. The thiol can convert to N,N'-diacetyl-L-cystine, a disulfide, and a small fraction may not move the assay out of range. A pale yellow tint or a stronger sulfurous odour is a reason to ask for the related-substance profile, not a reason to reject on appearance alone. A trend across lots — water climbing, assay drifting low, rotation at the floor — says more than one result near an edge. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a form claim the supplier's certificate does not prove, or a disputed result. The useful panel is focused: polarimetry with the conditions stated, infrared against a reference, HPLC assay plus a related-substance scan for the disulfide, the thiol reaction, loss on drying and ICP-MS for the metals. Microbiology follows the release panel where the destination requires it. Ask the laboratory to report its detection limit for the disulfide. “Not detected” without a limit describes the method's sensitivity, not the sample. The same rule applies to the assay: the report should name the column, the detector and the basis, not only the percentage. An outside laboratory is also the referee when a result is contested. Give it the retained sample, the supplier's certificate and the specification, and ask for the tests that separate the forms. Chain of custody matters: the sample tested should be the sample retained. ## What to compare between suppliers Put six lines side by side: the form and CAS; the assay with its method and basis; the specific rotation with its conditions; the identity tests; water, residue, pH and mesh; and the metal and micro panel. Two quotations that match on assay but diverge on rotation or identity are not describing the same powder. The second layer is lot traceability. The lot code should be identical on the certificate, the pack and the retained sample. The certificate should say who manufactured the lot, which acetylation route was used and which drying step was applied; a correct certificate can still belong to a pack other than the one on the loading dock. The catalog specification sits on the N-acetyl-L-cysteine product page. The tests that separate the acetylated form from cysteine and cystine are on the identity page; the release workflow is described on the quality page. The chromatographic method is explained in the HPLC method note, and the water basis in the note on loss on drying. ### 02 NAC, L-cysteine or L-cystine: choosing a grade URL: https://nutrition.rainwoodbio.com/products/amino-acids/n-acetyl-l-cysteine/grades/ Reviewed: 2026-11-18 N-acetyl-L-cysteine, L-cysteine and L-cystine are three different label ingredients, not three grades of one material. NAC is the acetylated derivative, with an acetyl group on the nitrogen; L-cysteine is the free amino acid; L-cystine is the disulfide dimer of two cysteine molecules. The choice is fixed by the label, the assay basis, the solubility and the stability of the dosage form before it is fixed by a certificate percentage. In one lineNAC, L-cysteine and L-cystine are three different label ingredients, and switching between them changes the assay basis, the solubility, the stability and the label. ## The name on the label is the first constraint A grade is a specification you can buy; a form is a molecule you declare. Within N-acetyl-L-cysteine the grades are physical: the standard 40 mesh powder, a milled 80 mesh material and a granulated version. Across NAC, L-cysteine and L-cystine the difference is chemical, and no certificate percentage makes one a substitute for another. The acetyl group is the defining feature of NAC. It sits on the nitrogen of L-cysteine, so the molecule has an amide rather than a free amine, while the thiol remains free. That single change alters the molecular mass, the acidity of the solution, the oxidation product and the analytical tests that prove identity. L-cysteine hydrochloride is a salt of the free amino acid, and the monohydrate carries water of crystallisation; both must be named as such on the label. ## Three forms side by side The three cysteine forms · identity, handling and label name | Form | CAS and formula | Solubility and pH | Stability | Label name | N-acetyl-L-cysteine | 616-91-1 · C5H9NO3S · 163.19 | Freely soluble in water; 1% solution pH 2.0–3.0 | Thiol oxidation to the disulfide; stable dry and sealed | N-acetyl-L-cysteine | L-cysteine | 52-90-4 · C3H7NO2S · 121.16 | Soluble in water; solution close to neutral | Oxidises to L-cystine in solution and on exposure to air | L-cysteine | L-cystine | 56-89-3 · C6H12N2O4S2 · 240.30 | Poorly soluble in water, about 0.1 g/L; soluble in dilute acid and alkali | Already the disulfide; solubility is the limitation | L-cystine The table is a starting point, not a substitute for the specification. Each form has its own assay method, its own impurity profile and its own hydrate or salt question. A certificate that reports 99% for one form does not describe 99% of another. ## Assay, water and the particle The assay percentages are not directly comparable. NAC is specified at 98.5–101.5% on the dried basis by HPLC. L-cysteine and L-cystine are also assayed against their own reference materials and often on their own dried basis, and the hydrochloride salt is assayed as the salt. Read the basis and the named form before comparing two figures; 99% of a salt is not 99% of the free amino acid. The mass conversion follows the molecular weight. A 500 mg label claim for L-cysteine needs 500 mg of free base; if the powder is the hydrochloride monohydrate at 69.0% cysteine, the weigh-up is about 725 mg. A 500 mg L-cystine dose supplies about 504 mg of cysteine equivalents because the dimer contains two cysteine units. NAC is declared as NAC: its cysteine skeleton is about 74% of the mass, but that arithmetic is a chemistry exercise, not a label conversion. Sulfur content separates the acetylated form from the other two: NAC is about 19.6% sulfur, L-cysteine about 26.5% and L-cystine about 26.7%. A sulfur result can flag a substitution of NAC by cysteine or cystine, but it cannot separate cysteine from cystine because the two are nearly identical on this element. Particle size is a grade decision inside NAC. The standard powder is ≥95% through 40 mesh; an 80 mesh milled lot is available on request, and a granulated lot can be specified for flow. Loss on drying is specified at ≤0.5%. Fines, static and flow matter at the capsule or tablet press even when the sieve result is the same. ## The dosage form narrows the choice Capsules and tablets accept the 40 mesh crystalline powder. An 80 mesh lot gives a finer, more uniform fill and is easier to blend at low dose; a granulated lot flows better on a high-speed press. The thiol odour is part of the material, so a capsule wall does useful work that a stick pack does not. Powder sticks and drink mixes put solubility and pH first. NAC dissolves freely and gives an acidic 1% solution at pH 2.0–3.0; that acidity can be acceptable in a fruit-flavoured stick and unwelcome in a neutral ready-to-drink format. L-cysteine is closer to neutral in solution but oxidises to cystine, and L-cystine itself is too poorly soluble for a clear drink. The matrix, not the certificate, decides whether the form fits. The label has to carry the same name as the specification. “NAC” is a useful abbreviation in copy, but the ingredient declaration should carry N-acetyl-L-cysteine. A hydrochloride salt is declared as the salt, not as L-cysteine, and a cystine lot cannot fill a cysteine claim. ## What changes when the form changes A switch changes seven things at once: the ingredient name, the assay basis, the mass conversion, the solution pH and solubility, the oxidation product, the identity tests and the regulatory route. That is a reformulation and a relabel, not a purchasing swap. The specification line should name the form and the CAS number, state the assay basis, and carry the tests that prove the form: rotation and thiol identity for NAC, the salt and hydrate for cysteine hydrochloride, the disulfide for cystine. The practical test is the label. If the artwork says N-acetyl-L-cysteine, only the acetylated lot belongs in the drum. If it says L-cysteine, an NAC lot is a different ingredient, however similar the two names look and however close the assay figures are. The grade comparison is therefore a label comparison first and a chemistry comparison second. ## When not to switch Do not switch a form to close an assay gap. If two certificates differ by a percentage point, check the basis, the salt and the method before changing the molecule. Do not switch a printed label to a different form; the ingredient declaration is part of the product. Do not move a clear neutral drink from NAC to cysteine without a stability trial, because the oxidation pathway changes with the form and the matrix. And do not use cystine where solubility is the limiting property, whatever the assay says. The forms are compared in more detail on the NAC versus L-cysteine page. The certificate parameters are set out on the COA page; the market rules are on the compliance page; and the product hub carries the catalog specification. The sieve test is described in the note on particle size. ### 03 NAC is a thiol; oxidation and moisture decide the shelf life URL: https://nutrition.rainwoodbio.com/products/amino-acids/n-acetyl-l-cysteine/stability/ Reviewed: 2026-11-18 N-acetyl-L-cysteine is a thiol, and its shelf life is decided by oxidation rather than by the assay on the day of release. The free sulfhydryl reacts with oxygen to form N,N'-diacetyl-L-cystine, a disulfide; moisture, heat, trace metals and a pH above the acidic range accelerate the reaction. A sealed pack slows it, while an opened pouch, a neutral drink matrix and a warm store do not. In one lineThe thiol is the shelf-life clock: moisture, oxygen, heat and trace metals convert NAC to its disulfide, and the pack is what slows the reaction. ## The dry powder Crystalline NAC is specified with loss on drying at ≤0.5%, and material that stays below that figure in a sealed pack has little free water to drive chemistry. The thiol still meets the oxygen in the headspace, but the reaction is slow at ambient temperature and the crystal lattice limits mobility. The practical risks in the dry state are moisture pick-up after opening, caking, and a gradual colour or odour change that the assay may not reflect. The pack is part of the specification. A foil pouch and a lined fiber drum limit moisture and oxygen ingress; a torn liner or a pouch left open defeats both. Once the pack is opened, the room enters: humidity raises loss on drying, particles stick, flow changes and the thiol has more water available for oxidation. Reseal the pouch between weighings and close the drum liner down rather than folding it back. Fines matter more than the certificate suggests. A 40 mesh powder has a smaller surface area than an 80 mesh lot, and a milled lot exposed to the same air can pick up moisture and oxidise faster. If the process uses an 80 mesh grade, the storage and handling instruction should be written for that grade, not for the catalog powder. ## In solution, pH and oxygen set the rate At 1% in water NAC is specified at pH 2.0–3.0. That acidity is useful: the thiol is mostly protonated, and the protonated form is less reactive toward oxygen than the thiolate anion that dominates at neutral or alkaline pH. A buffer that lifts the matrix to pH 6 or 7 removes that protection, and the oxidation rate rises with it. Dissolved oxygen and headspace oxygen are the second control. A still drink in a clear bottle with a large headspace offers both, and heat during pasteurisation or filling accelerates the reaction. Trace iron and copper catalyse thiol oxidation at low concentrations, so contact with mild steel, brass or contaminated water is worth auditing even when the certificate passes. The analytical sign is a fall in assay and a rise in the disulfide, often with a stronger sulfurous odour, a pale yellow tint or a haze. The assay may stay inside the 98.5–101.5% window while a small disulfide fraction forms, which is why a stability study should track the disulfide by a method that separates it, not only the parent peak. ## What actually moves the result Stability factors · N-acetyl-L-cysteine | Factor | Effect | Control | Oxygen | Thiol to disulfide; assay loss | Sealed pack, low headspace, oxygen barrier | Water | Higher LOD, caking, faster oxidation | Moisture barrier, desiccant where needed, dry handling | Heat | Faster oxidation and colour change | Cool storage and process; trial the real temperature | pH above 3 | More thiolate, faster oxidation | Keep the matrix acidic or trial the buffered pH | Iron and copper traces | Catalysis at low concentration | Audit contact surfaces and water; set limits | Light | Secondary effect on colour | Opaque or amber pack for retail formats | Particle size | Finer powder exposes more surface | Store and handle by the specified mesh ## The stability protocol The bulk study keeps powder in its commercial pack at 25 °C/60% RH and 40 °C/75% RH. Pulls are taken at the start and then at 3, 6, 12 and 24 months, with assay, loss on drying, specific rotation, appearance, pH and the disulfide tested at each point. Microbiology belongs at the start and at the end, or at each pull where the destination requires it. The warm leg is a stress condition, not a storage instruction; it exists to make a trend appear inside the study window. A solution study is separate. Hold the real matrix at 5 °C, 25 °C and 40 °C, at its final pH, with the intended headspace and packaging, and test assay, disulfide, pH, colour and odour. If the product is a stick pack, test the stick; if it is a reconstituted drink, test the drink after the stated hold time. A bulk powder study does not answer a solution question. The finished-product study runs alongside, not instead. Capsules and tablets go into their own pack at 30 °C/65% RH and 40 °C/75% RH and are tested for assay, moisture, appearance and dissolution where it applies. A capsule can look acceptable while the powder inside has oxidised, because the shell hides the colour; the assay and the disulfide are what see it. ## Formulation and packaging Capsules and tablets shield the powder from light and from the worst of the air, and the remaining risks are water and the excipients. An alkaline excipient, a metal-containing colour or a wet granulation step can all move the thiol. Keep the blend dry, check the water activity of the granulating fluid, and test the compressed tablet rather than the blend alone. Powder sticks depend on the laminate and the seal. A foil laminate with a low moisture-vapour transmission rate, a continuous seam and a controlled fill weight is the baseline; a clear or paper format needs its own data. Ask whether a desiccant can be specified where the destination climate demands it; it is not a substitute for a sealed seam. Drink mixes are the hardest matrix because the consumer adds water. An acidic fruit base is friendlier than a neutral one, but the acid also affects taste and the buffer capacity of the finished drink. Reduce dissolved oxygen where the process allows, avoid metal contact, and keep the stick pack sealed until use. A sulfurous odour in the dry powder is a warning; in the reconstituted drink it is a failure the consumer can taste. ## How shelf life is assigned A shelf life is a conclusion from stability data on the grade, the pack and the matrix, not a number attached to the chemical name. The TDS should state the storage condition and the retest or expiry period that the study supports. Bulk material that will be re-tested before use can carry a retest period; a consumer pack needs a date the shopper can read, and a drink mix needs a date that covers the reconstituted product as well. Where the pack or the matrix has not been studied, the defensible answer is a shorter period or a new study. A 24-month figure borrowed from another pack proves nothing about this pouch, drum or stick. The COA page lists the parameters that are followed over time; the packs that a study has to cover are described on the ordering page. The quality page explains how the data are held, and the product hub carries the catalog specification. ### 04 N-Acetyl-L-Cysteine: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/amino-acids/n-acetyl-l-cysteine/moq/ Reviewed: 2026-11-18 N-acetyl-L-cysteine is supplied from 1 kg, drawn from a released lot and accompanied by that lot's certificate. The 25 kg fiber drum is the production pack; the 1 kg foil pouch is the qualification pack. The quoted lead time is 1–7 days from confirmation, and what a quotation contains depends on mesh, quantity, destination and documents. In one lineOne kilogram from a released lot is the qualification unit; the pack, the mesh and the destination documents define the order. ## Why the minimum is one kilogram The purpose of a small first order is to qualify a material, not to stock a shelf. A kilogram supports bench work, a pilot encapsulation or tableting run and a short stability check. It comes from a lot that has already been released, so the powder in the trial and the certificate in the file refer to the same production batch. One kilogram is a packing and documentation unit rather than a volume break. A larger order is filled from the same released lot when the lot is large enough; when it is not, a new lot is raised. The certificate always belongs to the lot that fills the drum, and the lot code should match on the certificate, the pack and the retained sample. The minimum is also the point at which the paperwork becomes useful. A trial without a COA, a TDS and a specification is a demonstration; a kilogram with the three documents is a qualification. That distinction matters more than the mass. ## Packaging Standard packs · N-acetyl-L-cysteine | Pack | Use | Notes | 1 kg foil pouch | Trial, sample, small batch | Sealed food-grade liner; product, mesh and lot on the label | 25 kg fiber drum | Production | Lined drum, tamper-evident closure, lot label visible The liner is the surface that meets the powder, so a torn liner or an unsealed drum changes the storage condition regardless of the label. The thiol is sensitive to moisture and oxygen; for a humid destination, ask whether a desiccant or a thicker laminate can be written into the packing specification, and whether the pack is flushed. Either changes the storage condition. Every pack should carry the product name, the mesh, the net mass, the lot and the storage condition. If those details cannot be matched to a certificate, traceability has already failed. Open and close both formats in the same dry area, and reseal the pouch between weighings rather than leaving it folded open. ## Lead time The quoted window is 1–7 days measured from confirmation of specification and order. That is later than the first enquiry: the clock begins when the form, mesh, quantity, packing and paperwork are settled. Milling to 80 mesh, a granulation step or an outside laboratory test adds its own time, shown separately on the quotation. Three things commonly move the date: a specification edited after confirmation, a document requested late in the process, and a destination rule that needs a licence or an additional test. Raising all three in the first exchange protects the date better than chasing it later. If there is a launch date, it belongs in the brief, not in a follow-up email. ## What the quotation needs A useful enquiry answers six questions: - Which form and grade are wanted: NAC 40 mesh, milled 80 mesh or granulated, and is a competitor's specification being matched? - What is the first-order quantity, and what volume is expected across a year? - Which dosage form will carry the powder: capsule, tablet, stick pack or drink mix? - Which destination market, and which documents does it require? - Which pack size and barrier are needed, and is a desiccant or a specific liner required? - Is there a launch or delivery date that cannot move? A competitor's certificate can replace a written brief at the start, because it shows the tests and limits the buyer already uses. Send it and the reply will be a counter-specification: what can be met, what cannot, and what needs a trial. The assay, rotation and thiol identity are the lines that matter most for this material, so a brief that names them shortens the exchange. ## Samples A sample is taken from a released lot and travels with that lot's COA. Ask for the grade the trial will run — 80 mesh, granulated or the standard 40 mesh — not the catalog powder, or the trial will answer a different question. A sample without a certificate is a demonstration, not a qualification. The quantity should follow the trial protocol: enough capsules or tablets for the panel plus a reserve, or enough powder for the blend and the analytical repeats. Keep part of the sample as a reference so the trial result can later be compared with the production lot. ## Payment, claims and terms Payment terms, Incoterm and documentary requirements are confirmed in the order paperwork. Destination, quantity and whether the account is new all affect them, so no single website statement can cover every order. Shortage and damage reports are checked against the retained sample and the lot certificate. Report damage or a shortfall when the pack is opened, with photographs of the pack and its lot label, so the report can be tied to the lot record. The purchase order should carry form, mesh, pack and documents; the specification is the annex against which the certificate is checked. The COA page sets out what the certificate contains; the grade page shows what a mesh or form change does to the order; the quality page describes the lot record. The product hub is N-acetyl-L-cysteine. ### 05 Where NAC is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/amino-acids/n-acetyl-l-cysteine/compliance/ Reviewed: 2026-11-18 N-acetyl-L-cysteine is regulated differently in each market. The EU has no harmonised supplement listing and leaves the food-or-medicine question largely to Member States. The US FDA has exercised enforcement discretion since 2022 and published a proposed rule in November 2026 that would, if finalised, confirm NAC is not excluded from the dietary supplement definition. Great Britain applies retained food law and its own novel-food and claims registers, while Northern Ireland follows the EU regime; permission, contaminants, labelling and claims remain separate checks. In one linePermission, contaminant limits, label wording and claims are four separate checks, and NAC answers them differently in the EU, the US and the UK. ## The four checks Selling an NAC lot raises four questions that are often conflated: is the substance permitted, and on what basis; which contaminant ceiling applies at the daily dose; does the label declare the form correctly; and is the statement an authorised claim, a structure/function statement, or not allowed at all? The answers do not travel together. A form accepted in one country can be a medicine in another, and a finished-product ceiling cannot be pasted onto the raw material. The current legal text in the destination market decides. ## European Union Directive 2002/46/EC harmonises food supplements, and its Annex I includes amino acids among the permitted substance categories. It does not contain an EU positive list of individual amino acids, so NAC is regulated mainly through Member State law and the general food rules. In practice the substance has a dual status: a licensed medicine in several Member States and a food supplement in others, with classification turning on dose, presentation and claims. The destination country is the first check, because a Member State may restrict a supplement that another accepts. National assessments have also set guidance: a 2015 Spanish assessment accepted 300 mg per day of NAC from food supplements, a national position rather than an EU maximum. Record the novel-food question for the specific use. Labelling follows Regulation (EU) No 1169/2011 and the supplement particulars in Directive 2002/46/EC; claims follow Regulation (EC) No 1924/2006. NAC has no EU nutrient reference value, so no percentage NRV can be declared, and the claim register contains no authorised NAC claim as of this review. The EU regulatory note expands the framework. ## United States US law asks whether NAC is a lawful dietary ingredient under section 201(ff) of the Federal Food, Drug, and Cosmetic Act. The FDA has regarded NAC as excluded because it was approved as a drug before DSHEA, and since 2022 a final guidance has applied enforcement discretion to NAC products labelled as dietary supplements. In November 2026 the FDA published a proposed rule, 91 FR 73717, that would provide by regulation that NAC is not excluded from the dietary supplement definition. As of this review the rule is proposed, not final, so the file records both the guidance and the rulemaking status. A supplement label follows the Supplement Facts panel in 21 CFR 101.36: serving size, amount of NAC per serving and the ingredient name. There is no Daily Value for NAC, so the panel carries no percentage. A structure/function statement must be truthful, not misleading and substantiated, and must sit beside the DSHEA disclaimer in 21 CFR 101.93; the marketer notifies the FDA within 30 days of first marketing it. There is no federal maximum for lead in supplements. California's Proposition 65 sets a maximum allowable dose level of 0.5 µg/day for lead, calculated from the daily dose. The US regulatory note sets out the framework. ## The contaminant table Contaminant limits · food supplements, EU position with US and UK notes | Element | EU | US | UK | Lead | 3.0 mg/kg | No federal maximum specific to supplements; Proposition 65 may apply | Retained limits; check the current GB text | Cadmium | 1.0 mg/kg | Check federal and state law | Retained limits; check the current GB text | Mercury | 0.10 mg/kg | Check federal and state law | Retained limits; check the current GB text | Arsenic | Not harmonised; a Member State limit is possible | Check federal and state law | Retained limits; check the current GB text The EU column is written for the supplement as sold, not the raw material. The catalog specification sets Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg, a raw-material gate whose adequacy depends on the daily dose and the share of the formula. Arsenic has no harmonised EU number for supplements, so the buyer sets one. The UK column is a prompt: GB retained and amended EU contaminant law, so confirm the current text. ## Claims and labelling The EU claim register under Regulation (EU) No 432/2012 authorises only the listed wording and conditions. No NAC entry appears there as of this review, and NAC has no NRV to anchor a “source of” nutrition claim; a disease claim is outside the regulation altogether. In the US, a structure/function statement is written and substantiated by the brand and carries the DSHEA disclaimer; it is not an FDA approval and cannot describe a disease or a medicinal use. In the UK, the GB nutrition and health claims register performs the same role, and no NAC claim appears there as of this review. The label should name the form: N-acetyl-L-cysteine, not L-cysteine or an abbreviation alone. NAC has no EU NRV or US Daily Value, so the panel declares the amount per portion or serving without a percentage. A product that also contains cysteine or cystine must declare each form separately; the three names are not interchangeable. Nothing on this page is a claim for the ingredient. ## The document pack A complete lot file usually contains: - A lot COA covering assay by HPLC on the dried basis, specific rotation, thiol and infrared identity, water, residue, pH, mesh, metals and microbiology. - A TDS, a purchase specification naming the form and mesh, and a 16-section SDS. - Allergen, GMO, origin, residual-solvent and animal-derived input statements. - An elemental-impurity report against the destination limit at the intended dose. - Stability data for the grade and pack, and the storage condition on the TDS. - A US basis memo recording the 2022 guidance and the 2026 proposed rule, an EU or UK market note, and an independent COA where required. Every document should carry the lot number. A generic TDS and a lot-specific COA are not a matched pair unless form, mesh and pack agree. ## What to check before the first order Six questions settle the file: - Which market will sell the product, and which legal route is documented there? - Does the COA name N-acetyl-L-cysteine and report rotation and thiol identity, not only the assay? - Are the metal figures below the destination ceiling at the actual daily dose? - Does the label name the form, omit a percentage NRV or Daily Value, and carry the required particulars? - Is every claim inside the authorised wording or a properly disclaimed structure/function statement? - Is the lot file complete and lot-coded, with the food-or-medicine borderline recorded? The COA page shows the parameters the file has to support, and the identity page explains how the form is proved. The product hub carries the catalog specification, and the quality page shows how the lot file is assembled. The UK and EU notes expand the market positions. ### 06 How we prove an NAC lot is the acetylated L form URL: https://nutrition.rainwoodbio.com/products/amino-acids/n-acetyl-l-cysteine/identity/ Reviewed: 2026-11-18 An N-acetyl-L-cysteine lot is proved in four layers: the record names the material, infrared and a thiol reaction establish the acetylated cysteine, specific rotation assigns the L configuration, and HPLC with loss on drying fixes the amount. The assay alone is the weakest proof: it can pass the D form, free cysteine, cystine or a diluted powder. Rotation and thiol chemistry separate this molecule from the other cysteine forms. In one lineThe rotation assigns the L configuration, the thiol reaction and IR prove the acetylated cysteine, and the assay only measures how much is there. ## Four layers of identity Each layer answers a different question, and the blind spot in one is covered by the next. Identity layers for N-acetyl-L-cysteine and what each one misses | Layer | What it answers | Check | What it cannot show | Record | What the lot is meant to be | Name, CAS 616-91-1, lot code, specification | Nothing about the drum | Substance | Whether the molecule is acetylated cysteine | Infrared, thiol reaction, HPLC retention | D and L look the same | Configuration | Whether it is the L form | Specific rotation; chiral HPLC where needed | Quantity; a small D excess | Form and purity | Whether the powder matches the specification | HPLC assay, loss on drying, residue, pH, mesh | Configuration Start with the assay and you are looking at the one number compatible with every failure mode: a high result can still be the D form, the free amino acid or a blend. ## Specific rotation and the L configuration Specific rotation is how enantiomeric composition appears in a polarimeter. Divide the observed reading by the cell path in decimetres and by the concentration in grams per millilitre, then compare the result with the pure enantiomer. The catalog range is +21.0° to +27.0° on the dried basis; the certificate should state the solvent, concentration, temperature and path length, because a figure without them cannot be compared. The sign is the first evidence. The L form reads positive in the specified conditions, the D form reads negative, and a racemate sits near zero. But the window is a release gate, not an enantiomeric purity grade. If a pure L material reads near +27.0°, a mixture carrying 10% of the D form still reads about +21.6° and passes. A rotation near +21.0° deserves a chiral check before release. Where the risk assessment needs the ratio rather than the gate, add chiral HPLC. A chiral method separates the enantiomers and reports the D figure with a detection limit. “D form not detected” without that limit describes the method's sensitivity, not the sample. The rotation remains the routine test; chiral HPLC is quantitative. Cysteine and cystine have their own rotation windows, so a reading outside the NAC window is a signal to identify the material, not a purity result. ## The thiol reaction, IR and the solid state Sodium nitroprusside turns red or purple with a free thiol under alkaline conditions; Ellman's reagent releases a yellow anion that can be measured; iodine oxidises the thiol and is the basis of the iodometric assay used in some monographs. All confirm a free sulfhydryl, but cysteine also has one, so the reaction alone does not prove the acetylated form. Infrared supplies the missing part. NAC shows the amide bands of the acetylated nitrogen and the carboxyl group; L-cysteine shows a free amine and no amide, and L-cystine shows a disulfide and no free thiol. A positive thiol reaction plus an amide band shows an acetylated cysteine; HPLC retention ties it to the NAC standard. X-ray diffraction reads the crystal lattice. NAC is crystalline, so a pattern fingerprints the solid form and checks that a milled or granulated lot matches the reference. It is not a configuration test: the L and D forms give the same powder pattern, and a racemate differs only when it crystallises as a racemic compound. XRD can flag a different salt or an amorphous blend; it cannot clear the L form. The technique is described in the XRD method note. The 1% solution pH supports the picture: the specification is 2.0–3.0. ## The substitution routes Substitution routes for N-acetyl-L-cysteine and the test that catches each | Route | Signature | Test that catches it | L-cysteine | Thiol present, no amide, lower molecular mass, higher sulfur | IR amide band, HPLC retention, rotation outside the NAC window | L-cystine | Disulfide, no free thiol, poorly soluble | Nitroprusside negative, HPLC retention, rotation | D-NAC or a racemate | Same IR, same thiol, same achiral HPLC | Specific rotation, chiral HPLC | Another N-acetyl amino acid | Amide present, sulfur absent or below NAC | Elemental sulfur, HPLC retention, IR reference | A diluted or blended powder | Low assay, high residue or water, foreign IR peaks | Assay, residue on ignition, loss on drying, IR The D form is the route an assay cannot see: same mass, thiol, infrared spectrum and achiral retention. Only rotation or a chiral method separates it. The cysteine route is the one a thiol test cannot see, because cysteine also reacts. The cystine route is the easiest to screen: a disulfide gives no free-thiol response, and its solubility is visibly different. Other N-acetyl amino acids carry the amide band but most lack sulfur, so an elemental sulfur result is the screen. A blend with lactose, maltodextrin or an inorganic salt shows up in the assay, residue or water, and the IR stops matching the reference. ## How to write the specification line An enforceable specification fixes the molecule, configuration and assay basis at once. A workable line reads: “N-acetyl-L-cysteine, CAS 616-91-1, 98.5–101.5% on the dried basis by HPLC; specific rotation +21.0° to +27.0° on the dried basis; identification by infrared and thiol reaction conforms; loss on drying ≤0.5%; residue on ignition ≤0.1%; pH 2.0–3.0 (1% solution); particle size ≥95% through 40 mesh; heavy metals Pb ≤3, As ≤2, Cd ≤1, Hg ≤0.1 mg/kg; APC ≤1,000 cfu/g, yeast and mould ≤100 cfu/g, E. coli and Salmonella absent.” Three clauses carry the weight. “N-acetyl-L-cysteine” excludes cysteine and cystine. “Dried basis” blocks a silent water correction. The rotation and the thiol identity sit in the release tests, not in a side conversation, because an unwritten limit disappears when the supplier changes. Add a disulfide limit and a chiral D-form limit where the risk assessment calls for them; the catalog specification sets neither. Add the mesh for a milled or granulated lot, because the certificate is judged against the specification. ## Five questions to put to a supplier - Do the certificate and the pack name N-acetyl-L-cysteine, or does either use L-cysteine as a synonym? - What rotation did this lot give, in which solvent, at what concentration and temperature, and on which basis? - Which thiol reaction and IR reference were used, and what did the HPLC retention time match? - Which HPLC method and standard gave the assay, on which basis? What are the loss on drying, residue and pH? - What is the disulfide figure and its detection limit? Has a chiral method been run, and what D-form figure did it return? The COA page shows where these figures sit, and the grade page explains why the forms are not interchangeable. The product hub carries the catalog specification, the HPLC method note covers the assay, and the quality page describes the lot record. ### 02.1 NAC vs L-cysteine: solubility, stability and the label URL: https://nutrition.rainwoodbio.com/products/amino-acids/n-acetyl-l-cysteine/grades/nac-vs-cysteine/ Reviewed: 2026-11-18 N-acetyl-L-cysteine and L-cysteine share the cysteine skeleton and a free thiol, but they are not interchangeable. NAC carries an acetyl group on the nitrogen, which raises the molecular mass from 121.16 to 163.19, changes the acidity of the solution and changes the oxidation product. The label, the assay conversion, the solubility and the stability of the matrix decide which one the formula needs. In one lineNAC and L-cysteine share a thiol but not a label, a solubility profile or an oxidation pathway; the form has to be chosen before the formula. ## The acetyl group changes four things The two molecules differ by one acetyl group on the nitrogen, with four consequences: molecular mass, acid–base behaviour, oxidation product and identity test. A formulator who handles them as the same thiol will meet all four at the bench. N-acetyl-L-cysteine and L-cysteine · the properties that differ | Property | N-acetyl-L-cysteine | L-cysteine | CAS and formula | 616-91-1 · C5H9NO3S · 163.19 | 52-90-4 · C3H7NO2S · 121.16 | Nitrogen | Acetylated amide | Free amine | Sulfur content | About 19.6% | About 26.5% | 1% solution pH | 2.0–3.0 | Close to neutral | Solubility in water | Freely soluble | Soluble | Main oxidation product | N,N'-diacetyl-L-cystine | L-cystine | Label name | N-acetyl-L-cysteine | L-cysteine, or the hydrochloride salt The pH difference is the one most often missed. NAC at 1% is a distinctly acidic solution because the carboxyl group is free and the amide does not provide a counterbalancing amine. L-cysteine in solution sits near its isoelectric point and is much closer to neutral. A drink matrix buffered to pH 6 handles the two quite differently. ## The mass conversion is not a rename A 500 mg NAC capsule contains 500 mg of N-acetyl-L-cysteine. It does not contain 500 mg of L-cysteine, and the label cannot say so. The cysteine skeleton is about 74% of the NAC mass, but the acetyl group is part of the declared molecule; subtracting it is a chemistry exercise, not a label conversion. A 500 mg L-cysteine claim needs 500 mg of free base. If the powder is L-cysteine hydrochloride monohydrate, which is about 69.0% cysteine, the weigh-up is about 725 mg; the anhydrous hydrochloride is about 76.9% cysteine. The label must name the salt and the hydrate, because the mass of the declared ingredient includes them. L-cystine is the dimer: 500 mg supplies about 504 mg of cysteine equivalents, but its poor solubility usually decides the application before the conversion does. Assay figures need the same discipline. NAC is specified at 98.5–101.5% on the dried basis. A cysteine or cystine certificate carries its own method and basis, and the hydrochloride is assayed as the salt. Two 99% figures can describe different amounts of the declared ingredient, so read the basis before converting. ## Solubility and pH decide the dosage form NAC dissolves freely and gives an acidic solution. That suits a capsule, a tablet or an acidified stick pack, and it can be a problem in a neutral ready-to-drink product where the pH has to stay near 6. L-cysteine is soluble and much closer to neutral, which is easier on the matrix but leaves the thiol more exposed to oxidation at that pH. L-cystine is poorly soluble, about 0.1 g/L in water, and is soluble only in dilute acid or alkali; it does not belong in a clear drink. Solubility is not the same as dissolution rate. A 40 mesh NAC powder wets quickly, while a granulated lot may dissolve more slowly but flow better. In a stick pack the powder has to dissolve in the consumer's glass, not in the plant's tank, so trial the real volume, temperature and shaking time. The acidic taste and the thiol odour are part of the sensory problem. NAC in a fruit-flavoured acid stick can be masked; in a neutral dairy or ready-to-drink base it is harder to hide and the pH shift may need a buffer. ## Oxidation takes a different route Both molecules are thiols, and both react with oxygen. NAC forms N,N'-diacetyl-L-cystine; L-cysteine forms L-cystine. The reaction is faster when the thiol is deprotonated, so a neutral or alkaline solution is less kind to either form than an acidic one. Trace iron and copper catalyse the reaction, heat accelerates it, and water in the powder gives the ions and the mobility to proceed. The acetyl group does not stop oxidation; it changes the product and the pH, and it removes the free amine. Both forms are stable in a sealed, dry pack; the difference appears after opening or in solution. A cysteine solution can deposit cystine as it oxidises, while an NAC solution forms a different disulfide, so the visual failure modes differ. For a drink mix, the practical controls are the same for both: lower the pH where the label allows, reduce dissolved oxygen and headspace, avoid metal contact, and use a foil laminate rather than a clear film. The stability data still has to be generated on the chosen form and matrix; a study on NAC does not cover cysteine. ## The label and the regulatory route differ The ingredient declaration follows the molecule. N-acetyl-L-cysteine, L-cysteine and L-cysteine hydrochloride are separate names, and a certificate for one does not support a label for another. Neither NAC nor cysteine has an EU nutrient reference value or a US Daily Value, so the panel declares the amount per portion without a percentage; a “source of” style nutrition claim has no anchor to stand on. The regulatory position also differs. L-cysteine has a long food use, including as a dough conditioner and a supplement ingredient. NAC is the subject of a separate food-or-medicine debate in several markets, and in the United States the FDA has been operating under enforcement discretion while a proposed rule published in November 2026 would, if finalised, confirm that NAC is not excluded from the dietary supplement definition. The compliance page sets out the EU, US and UK positions; check the current text before the label is approved. No statement on this page is a claim for either ingredient; the label sentence belongs to the brand's file. ## When to choose which Choose NAC when the label says N-acetyl-L-cysteine, when the matrix can take an acidic ingredient, and when the identity file can carry specific rotation and a thiol reaction. Choose L-cysteine when the label says L-cysteine, when a near-neutral solution is the priority, and when the oxidation route to cystine has been studied in that matrix. Choose the hydrochloride salt when the free base does not give the solubility the formula needs, and declare the salt. Choose none of them on the strength of an assay figure alone. Four questions settle most of the decision: What name will the label carry? What pH will the finished product hold? Is the product a dry solid or an aqueous solution? Which market's regulatory route has been checked? If the answers point to NAC, the grade page covers the mesh and packaging options, and the identity page covers the tests that prove the acetylated L form. The stability page covers the oxidation controls, and the product hub carries the catalog specification. ### 01 What the COA for bone collagen peptides actually contains URL: https://nutrition.rainwoodbio.com/products/protein-collagen/bone-collagen-peptides/coa/ Reviewed: 2026-11-19 A certificate for bovine bone collagen peptides carries four figures that decide what the material is: the protein content with its nitrogen factor, the hydroxyproline content, the ash the bone mineral leaves, and the molecular weight distribution. Each figure is only meaningful beside its method. The catalogue specification sets the ranges; the batch COA confirms what the lot in the drum measured. In one lineA bone collagen certificate is complete only when the protein factor, the hydroxyproline figure, the ash and the peptide distribution appear together, each with its method. ## The parameter list The parameter list follows from what the material is: a spray-dried hydrolysate of bovine bone collagen, specified at ≥90% protein, 8–12% hydroxyproline and a 3,000 Da peptide cut-off. The tables below are the catalogue list with the method beside each line. Identity and composition · bovine bone collagen peptides | Parameter | Method | Catalogue limit | Appearance | Visual | White to off-white powder | Protein (dry basis) | Kjeldahl, N × 5.55 | ≥90.0% | Hydroxyproline | HPLC | 8.0–12.0% | Molecular weight | SEC | ≥90% below 3,000 Da | Loss on drying | Gravimetric, 105 °C | ≤7.0% | Ash | Gravimetric, furnace | ≤5.0% | pH (5% solution) | Potentiometry | 5.0–7.0 Contaminants and physical parameters · bovine bone collagen peptides | Parameter | Method | Catalogue limit | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and enrichment | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh The tissue is also a parameter, though it produces no number: bone and hide are different raw materials with different ash profiles and label declarations. The source comparison covers that choice. ## What the protein figure is measured against Kjeldahl measures nitrogen, not protein. The nitrogen result becomes a protein figure only after a conversion factor is applied, and collagen uses 5.55 rather than the 6.25 applied to a general food protein. The factors are about 12% apart: 90.0% under 5.55 reads close to 101% under 6.25, the same powder with a different convention. Bone material adds a second basis. Protein is on a dry basis while ash and moisture are as-is. At the 7.0% moisture limit, 90.0% dry-basis protein is about 83.7% as-is; with 5.0% ash, roughly 4% remains for fat and carbohydrate — a normal mass balance, and the reason ash is not a purity figure on its own. Ash also separates this grade from hide collagen, usually specified at ≤2.0%: a bone hydrolysate carries more mineral unless demineralisation removes it. ## Catalogue range, release limit and lot result A release limit is the window a lot must fall inside; a lot result is what the laboratory measured. A useful certificate shows both, with the method beside each line, because “conforms to specification” is a conclusion without evidence. The molecular weight line is often compressed into a single number. The specification asks for ≥90% of the mass below 3,000 Da, a gate rather than a description: two lots can both pass while one sits near the cut-off and the other well below it. Ask for the distribution, not only the pass mark. Hydroxyproline has a smaller version of the same problem. The catalogue specifies HPLC; a colorimetric result is not the same measurement and should not be compared line for line with an HPLC figure, even when both land inside 8–12%. This is a catalogue specification: it states what the material is expected to meet, while the batch COA confirms the lot that ships. No page on this site reports a batch result, a batch number or a customer. ## What moves between lots Ash is the parameter most exposed to the raw material: bone from different animals, skeletal sites and rendering plants carries different mineral loads, and demineralisation does not always remove it to the same end point. A supplier drawing from several plants should be able to name the plant behind the lot. Protein and hydroxyproline move together and usually stay inside a narrow band once hydrolysis is fixed. The molecular weight distribution moves with hydrolysis time, temperature and the filtration that follows, and it is the parameter most likely to drift when equipment changes. Moisture follows the dryer; colour follows both raw material and dryer. Odour is the least quantitative signal and often the most useful. A faint broth note strengthens with moisture and storage temperature, and the protein figure can still pass while the odour no longer suits a flavoured stick. Ask for the retained sample and the storage history. ## When to send a sample to an outside laboratory Order an independent test when the source is new, when the first commercial shipment enters a regulated market, or when the label makes a statement the certificate does not prove. The useful panel answers the open question: hydroxyproline and the amino acid profile for identity, SEC for the distribution, ash and ICP-MS for the mineral and contaminant load, and species PCR where the tissue declaration is in doubt. The TSE file is not a laboratory test. It is a document and audit question, answered by slaughterhouse controls, the processing record and the declaration that travels with the lot. The quality page describes how the batch file and the retained sample are kept together. ## What to compare between suppliers Put six lines side by side before looking at anything else: the protein figure with its nitrogen factor and basis, the hydroxyproline figure with its method, the molecular weight distribution with its method, the ash limit, the species and tissue, and the BSE/TSE declaration. If two quotations agree on the protein percentage and disagree on the other five, they are not quoting the same material. The second layer is the record behind the certificate: which site made the lot, which raw material batch went in, which hydrolysis and drying conditions were applied, and what retained sample exists. A certificate can be accurate and still describe a lot other than the one that arrives. The lot number on the COA, on the drum and on the retained sample should be the same number. For the ranges themselves, see the bone collagen peptides product page. The source decision is on the bone versus hide page, the tests that prove identity are on the identity page, and the definition of the certificate is in the COA glossary entry. ### 02 Bone or hide collagen peptides: choosing a source URL: https://nutrition.rainwoodbio.com/products/protein-collagen/bone-collagen-peptides/grades/ Reviewed: 2026-11-19 Bone and hide collagen peptides are both bovine collagen hydrolysates, and both can be specified at ≥90% protein. What reaches the customer is different: the ash the bone mineral leaves, the peptide curve the raw material can hold, the TSE file that follows the tissue, and the words on the label. Choosing a source is a specification decision before it is a sensory one. In one lineBone and hide collagen come from the same animal but not the same tissue; the choice turns on ash, the peptide curve, the TSE file and the label wording. ## Why one species covers two materials A collagen peptide grade is usually described by species, and that description hides the tissue. Bovine collagen can come from hide, from bone, or from a mix of both, and the three are not the same purchase. Hide is the dermis, a dense collagen network with little mineral. Bone is a composite of collagen and hydroxyapatite, and that mineral has to be removed before or during hydrolysis if the ash figure is to stay low. The hydrolysis step is similar; the raw material and the clean-up are not. The difference is not cosmetic. It changes the ash limit, the TSE document that has to travel with the lot, and the ingredient name on the finished pack. A buyer who compares only the protein percentage will see two quotations that look identical and receive two different materials. ## The two sources side by side Bovine bone versus bovine hide collagen peptides · catalogue comparison | Point | Bone | Hide | Raw material | Bovine bone, mineralised | Bovine hide split, dermis | Ash limit | ≤5.0% in this catalogue | Usually ≤2.0%; agree in the specification | Protein | ≥90.0% (Kjeldahl, N × 5.55) | Same range commonly specified | Hydroxyproline | 8.0–12.0% (HPLC) | Similar range, confirm by HPLC | Mineral removal | Demineralisation before hydrolysis | No mineral removal step | Peptide curve | Set by hydrolysis; confirm by SEC | Set by hydrolysis; confirm by SEC | Odour | Faint broth note possible | Usually more neutral | TSE file | Tissue-specific; bone is the focus | Hide declaration; lower-risk tissue Read the table down the ash and TSE columns first. Those two decide whether the material can enter the formula and the market at all; the rest is optimisation. ## What changes in the drum Ash is the first physical difference. At the 5.0% limit, a 25 kg drum carries more than a kilogram of mineral material that is not protein. Two lots at the same protein figure can differ by three percentage points of ash, which is 30 g per kilogram of powder. In a 1 g capsule fill that is 30 mg of the fill weight doing something other than delivering peptide. Particle size and flow follow the drying route more than the tissue. The catalogue standard is ≥95% through 40 mesh, with agglomerated and low-dust granulated forms available on request. A bone hydrolysate that has been demineralised and spray-dried usually behaves like a hide hydrolysate of the same mesh; the difference is in the colour and the odour, not in the flow. ## What changes in the finished product In a capsule, ash takes up space in the fill and appears in the mass balance of the label. A formulator working to a fixed capsule size has to decide whether the ash is acceptable or whether a hide grade at ≤2.0% makes the fill easier to close. In a powder stick, the ash matters less than the odour and the colour, because the powder is tasted and seen. In a clear beverage, the peptide distribution matters more than the source. Both tissues can be cut to the same SEC profile, and haze follows the fraction above the cut-off rather than the animal. A bone grade that only just meets the 3,000 Da gate can leave more haze than a hide grade that sits well below it. The comparison should be made on the distribution, not on the tissue word. In a tablet, the 40 mesh powder and the granulated option decide compressibility and dust. The ash is part of the compression mix and counts toward the tablet weight, so a switch of source is also a re-validation of the tableting run. ## What to put in the specification The specification should open with the tissue, not only the species: “bovine bone collagen peptides, spray-dried” is a different line from “bovine collagen peptides”. After that, the six figures that make the material reproducible: - Protein ≥90.0% by Kjeldahl with the N × 5.55 factor, on a dry basis. - Hydroxyproline 8.0–12.0% by HPLC. - Molecular weight ≥90% below 3,000 Da by SEC, with the distribution reported. - Ash ≤5.0%, with the demineralisation step described. - Loss on drying ≤7.0%, pH 5.0–7.0 in 5% solution, ≥95% through 40 mesh. - Species, tissue, country of origin, BSE/TSE declaration and allergen statement. The COA page sets out how each of those lines is read, and the bone versus hide page takes the ash and TSE comparison further. ## When the source question is not worth reopening If the finished label already says bovine collagen and the specification has no tissue line, a switch to bone is a specification change, not a like-for-like substitution. It needs a new COA, a new TSE declaration, a sensory check and, in most markets, a label review. That work is justified when the bone source is part of the product story, when the ash limit fits the fill, or when the existing supplier cannot provide the TSE file the market asks for. It is not justified when the only difference is the word on the drum and the customer has no preference. In that case the cheaper decision is to keep the qualified source and spend the effort on the peptide distribution and the contaminant file instead. Whatever the choice, the product page carries the catalogue ranges, and the compliance page sets out what each market expects the file to show. ### 03 Bone collagen peptides are stable dry; moisture and the matrix decide the rest URL: https://nutrition.rainwoodbio.com/products/protein-collagen/bone-collagen-peptides/stability/ Reviewed: 2026-11-19 A spray-dried bone collagen peptide with a 7.0% moisture limit and no lipid phase has little to oxidise, and its protein and hydroxyproline figures barely move inside a sealed drum. What changes over shelf life is water, heat and the matrix: caking in the pouch, colour and odour drift, and in a liquid, clarity and colour. The pack and the formula decide the rest. In one lineDry bone collagen peptides do not lose protein in storage; moisture, heat in solution and the pack decide what the customer sees at the end of shelf life. ## The dry powder The catalogue caps loss on drying at 7.0%, and that figure is the one to watch because most other changes follow it. The powder is mildly hygroscopic. Much of the water uptake sits with the protein and the fine fraction rather than with the mineral ash, and a 40 mesh powder has more surface than a granulated one. In a sealed foil pouch at 25 °C and 60% relative humidity, the moisture stays where the dryer left it. Once the pouch is opened, the headspace exchanges with the room and the top layer starts to cake. Caking is not automatically a defect. A cake that breaks under light pressure and disperses again is cosmetic; one that has darkened, smells stronger, or leaves a film in the beaker has taken up enough water to matter. The distinction belongs in the receiving check, not only in the complaint file. ## In solution The catalogue describes the powder as soluble in water, clear to slightly hazy at typical use levels, with a pH of 5.0–7.0 in 5% solution. In a drink, the peptide meets water, heat and pH at the same time. A ready-to-drink beverage at pH 3.5 is outside the range the powder was measured in, and its behaviour has to be tested as a formula rather than inferred from the certificate. Hydrolysed collagen does not gel at ambient temperature, because the chains are too short to rebuild the triple helix. That is a convenience in a chilled drink and a limitation in a product that wants body. Heat is the bigger stress: a hot-fill or a retort step shortens the peptide further and can shift the molecular weight distribution, which is measurable by SEC before and after the process. Browning is slower and easier to miss. Collagen is low in lysine but not free of it, and a reducing sugar in a warm liquid can still push a colour change over months. A clear drink shows that change earlier than an opaque one, which is why the colour check belongs in the stability protocol at the real pH. ## What actually moves the result Factors that change bone collagen peptides in storage | Factor | Effect | Control | Moisture | Caking, colour, odour | ≤7.0% LOD; sealed pouch; dry room | Temperature | Odour, colour, peptide drift in liquid | ≤25 °C storage; declare the excursion | pH | Clarity, colour, taste in liquid | Test at the formula pH, not the 5% figure | Reducing sugars | Browning over months | Choose the sugar; shorten the heat step | Metal ions | Colour and haze in liquid | Check the water and the mineral premix | Light and oxygen | Colour drift | Opaque or foil pack; nitrogen if agreed | Time | All of the above | Real-time data on the market pack ## The test protocol A workable protocol runs the powder in the pack it will ship in, at two real-time conditions and one accelerated condition: 25 °C and 60% relative humidity, 30 °C and 65%, and 40 °C and 75% for the short study. Time points at 0, 3, 6, 12 and 24 months for the real-time arms, and 0, 1, 2, 3 and 6 months for the accelerated arm, are enough to see a trend without over-testing a stable material. The test list should follow the certificate rather than repeat it: appearance, loss on drying, pH, protein, hydroxyproline, molecular weight distribution and microbiology, plus an odour check against a retained reference. The liquid challenge is separate and should use the real formula, the real pH and the real heat process, with clarity and colour measured at the start and at each point. A sample kept at −18 °C is the control. ## Formulation and packaging The pack is part of the specification. The 1 kg foil pouch and the 25 kg fiber drum both carry a food-grade liner, and the liner is what keeps the 7.0% limit from moving. A drum that is opened and resealed in a humid room will pick up water at the surface even when the bulk stays inside the limit. In a capsule, the fill is protected from the air but not from the shell, which can soften if the powder is stored warm. In a single-serve stick, the headspace is small and the foil is the barrier; the format is the most forgiving of the three. In a beverage, the pack, the pH and the heat process all belong in the stability plan, because the powder's own shelf life says nothing about the drink's. ## How shelf life is assigned Shelf life is assigned to the pack, not to the molecule. It comes from real-time data on the market pack, backed by the accelerated arm, and it is stated with the storage condition that produced it. A 24-month figure for a sealed foil pouch at 25 °C and 60% relative humidity is common for this material, but it is a conclusion from data, not a property of collagen. Two practical points follow. First, the shelf life starts at dispatch, so the COA and the TDS should state the storage condition and the date of manufacture as well as the number of months. Second, a lot that has been opened, repacked or stored outside the condition has left the assignment and should be re-tested rather than shipped on the original date. The COA page covers the moisture line, the ordering page covers the packs, and the loss-on-drying entry defines the test. The catalogue ranges sit on the product page. ### 04 Bone collagen peptides: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/protein-collagen/bone-collagen-peptides/moq/ Reviewed: 2026-11-19 The minimum order is 1 kg in a foil pouch; production quantities ship in 25 kg fiber drums, with a 1–7 day lead time on the standard 40 mesh powder. A 1 kg order is drawn from a production lot, so it carries the same specification and the same batch documents as the drum. What takes longer than the packing is the document set and any custom mesh or granulation. In one lineOne kilogram is the trial pack and the 25 kg drum is the production pack; the order is settled by the specification and the file, not by the minimum. ## Why the minimum is one kilogram One kilogram is enough for a bench trial, a small capsule run and a customer sample, and it is small enough to be filled from a production lot rather than made as a separate batch. That distinction matters: a trial pack is a repack, not a pilot batch, so the material in the pouch and the material in the drum come from the same hydrolysis and the same dryer. The specification does not change with the pack size. The minimum is therefore a service level rather than a grade. A buyer who needs 1 kg to run a sensory panel and a buyer who needs a pallet of drums are ordering the same catalogue material, with the same COA format and the same TSE declaration. The difference is the packing step and the documents that go with the shipment. ## Packaging Standard packs · bovine bone collagen peptides | Pack | Net content | Format | Use | Foil pouch | 1 kg | Sealed foil laminate | Trial, sample, small run | Fiber drum | 25 kg | Drum with food-grade liner | Production The standard powder is ≥95% through 40 mesh. Agglomerated and low-dust granulated forms are available on request; both change the packing step and usually the lead time, because they are made to order rather than drawn from stock. Every pack carries the lot number, the net weight and the storage condition, and the lot number matches the one on the COA and the retained sample. The liner is part of the moisture control described on the stability page. A drum that is opened and left open in a humid room will pick up water at the surface even if the bulk stays within the 7.0% loss-on-drying limit. ## Lead time The standard lead time is 1–7 days. The lower end applies to the 1 kg pouch and to drums held in stock; the upper end applies when the order needs a custom mesh, a granulated form, a third-party test or a full export document set. The clock starts when the specification and the purchase order agree, not when the enquiry arrives, because a specification change after that point restarts the packing and the paperwork. Two things routinely add days without appearing on the quotation. The first is a document that has to be issued for the destination, such as a legalised declaration or a certificate of origin. The second is a test the buyer asks for on the shipping lot rather than accepting the routine COA. Both are worth raising at the quotation stage so the delivery date is built on the real sequence. ## What a quotation needs A quotation for this material is only comparable when it answers six questions. The table lists them in the order that avoids a second round. Six details a complete quotation answers | Item | What to state | Specification | Protein factor and basis, hydroxyproline method, SEC cut-off, ash limit, mesh | Quantity and pack | 1 kg pouch, 25 kg drum, or a mix; number of packs | Source and tissue | Bovine, bone, country of origin, BSE/TSE declaration | Delivery | Destination, Incoterm, and who arranges the booking | Documents | COA, TDS, SDS, TSE statement, allergen statement, certificates | Sample | Whether a 1 kg trial is included and which lot it comes from ## Samples A 1 kg sample is the practical unit for a first evaluation. Ask which lot it came from and request that lot's COA, because a sample drawn from an earlier lot will not predict the next production run. Run the sample in the real matrix at the real dose: a powder that disperses in water can still settle in a flavoured drink, and a colour that looks acceptable in a white powder can show in a clear liquid. Keep part of the sample as a reference. When the first production drum arrives, the reference lets the buyer compare odour and colour side by side instead of relying on memory. The COA page lists the lines that should match, and the identity page covers the tests worth repeating on a new source. ## Where the terms end The order fixes the specification revision, the pack, the lead time, the document set and the storage condition. It also fixes the quantity tolerance and the shelf life at dispatch; both belong in the purchase order rather than in an email. A specification revision after the order is a new agreement, not a clarification, because it can change the COA, the label and the TSE declaration. Commercial terms are confirmed in the quotation and the contract. This page states the pack sizes, the minimum and the lead time so the enquiry can be framed correctly; it does not state a figure for the material, because that depends on quantity, pack and destination. For the source decision behind the order, see the grade comparison; for the file that ships with it, see the compliance page; for the definition of the minimum, see the MOQ glossary entry. ### 05 Where bone collagen peptides are permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/protein-collagen/bone-collagen-peptides/compliance/ Reviewed: 2026-11-19 Bovine bone collagen peptides are a food ingredient and a food supplement ingredient in the EU, the US and the UK. In all three markets the permission question is usually settled quickly; the file is what takes the time — the species and tissue declaration, the TSE statement that follows bone, the contaminant results and the label wording. The notes below are as of this review and should be checked against the current text before a launch. In one lineBone collagen peptides are a food ingredient in the EU, the US and the UK; the source, the TSE file, the contaminant panel and the label carry the compliance weight. ## The four checks Compliance is four questions, usually answered in this order: is the ingredient permitted in the market and the category; is the source acceptable, which for bone means the TSE file; are the contaminants inside the limits; does the label and any claim match the file? A positive answer to the first does not carry the other three. The category matters as much as the ingredient. A collagen peptide sold as a food supplement follows the supplement rules in the EU and the UK and the dietary supplement rules in the US; the same powder sold as a food or beverage follows the general food rules. The ingredient file is similar; the label rules are not. ## European Union Collagen hydrolysate has a documented history of use as a food ingredient before 15 May 1997, which is the reference date in the novel food Regulation (EU) 2015/2283. On that basis it is regarded as a food ingredient rather than a novel food, and the novel food catalogue should be checked before a new market is entered. Food supplements sit under Directive 2002/46/EC, general food law under Regulation (EC) No 178/2002, labelling under Regulation (EU) No 1169/2011, and claims under Regulation (EC) No 1924/2006. Bone is the part of the file that needs attention. The TSE Regulation (EC) No 999/2001 controls the raw material, the specified risk material and the processing conditions, and a bone-derived lot should travel with a declaration that names the species, the tissue, the origin and the site. Contaminants are set by Regulation (EU) 2023/915 as of this review; check the consolidated text, because the annexes are amended. ## United States In the US, collagen peptides are a dietary ingredient under the Dietary Supplement Health and Education Act, with the label and facility obligations in 21 CFR 101 and the preventive-controls rules. The ingredient needs no pre-market approval, but the seller is responsible for identity, purity and labelling. For cattle-derived material, the FDA guidance on the use of materials derived from cattle in human food and cosmetics is the reference for the BSE controls, and the supplier declaration should show that the material complies. Contaminant limits are not harmonised at federal level: lead, arsenic, cadmium and mercury are addressed through FDA action levels, and California's Proposition 65 adds a separate exposure route for products sold into that state. A specification built to the EU limits is a practical starting point for the US file, not a substitute for the state-level review. ## United Kingdom The UK applies retained food information rules, the Food Safety Act 1990 and the Food Information Regulations 2014 in England, with devolved equivalents elsewhere, and the FSA is responsible for novel food assessment. TSE controls are retained in UK law and mirror the EU Regulation in structure. Great Britain and Northern Ireland have diverged in some areas since 2021, so the market should be named on the file: a label accepted in London is not automatically accepted in Belfast, and the reverse. The bone source is the item that draws the questions: the TSE declaration, the species and tissue statement and the origin should be issued for the lot, not for the supplier in general. ## The contaminant limits Contaminant limits · EU food supplements and the catalogue specification | Parameter | EU limit (food supplements) | Catalogue limit | Lead | 3.0 mg/kg | ≤3 mg/kg | Cadmium | 1.0 mg/kg | ≤1 mg/kg | Mercury | 0.1 mg/kg | ≤0.1 mg/kg | Arsenic | No harmonised limit | ≤2 mg/kg | APC | — | ≤1,000 cfu/g | Yeast and mould | — | ≤100 cfu/g | E. coli | — | Absent | Salmonella | — | Absent The EU does not set a harmonised arsenic limit for food supplements, so the 2 mg/kg line is a customer specification rather than a legal one. The microbiological lines are commercial limits agreed in the specification, not a harmonised EU criterion for collagen peptides. The legal baseline is that the food must be safe, and the buyer's specification is how that baseline is demonstrated lot by lot. ## Claims and label boundaries No disease-related claim can be made for the peptide. In the EU and the UK, a health claim has to come from the authorised list in Regulation (EC) No 1924/2006 as retained, and the claims that mention collagen in that list belong to vitamins and minerals, not to collagen peptides. A collagen product cannot borrow a vitamin claim unless the vitamin is present in the quantity the claim requires. In the US, a structure or function statement is allowed without pre-approval, but it must be truthful, not misleading, and accompanied by the DSHEA disclaimer. The safer label describes the ingredient and its composition — bovine bone collagen peptides, protein per serving, hydroxyproline — and leaves the outcome to the consumer. The identity page sets out what the file can prove about composition. ## The document pack Documents that travel with a bone collagen lot | Document | What it shows | Specification | Protein factor and basis, hydroxyproline, SEC, ash, mesh | COA | Lot results against the specification, with methods | TDS | Handling, solubility, storage and pack | SDS | Hazard classification for transport and handling | BSE/TSE declaration | Species, tissue, origin, site and processing controls | Species and tissue statement | Bovine, bone, country of origin | Allergen statement | Bovine material; no declared allergen in the peptide itself | Site certificate | GMP, HACCP or an equivalent food-safety scheme Halal or kosher certificates, when the market asks for them, are issued for the site and the process and have to be current. They sit on top of the pack above, not instead of it. ## What to check before the first order - Ingredient status confirmed for each market, and for the product category. - Species and tissue named on the specification, the COA and the label. - BSE/TSE declaration issued for the lot, the site and the origin. - Contaminants inside the EU limits and the customer specification. - Micro limits agreed and tested on every lot. - Label ingredient name and allergen statement match the file. - Claims checked against the authorised list or the DSHEA rules. - Document set complete, current and version-controlled. The COA page covers the analytical lines, the grade page covers the source decision, and the EU, US and UK regulatory notes give the market framework. The product page carries the catalogue ranges. ### 06 How we prove a bone collagen lot is collagen URL: https://nutrition.rainwoodbio.com/products/protein-collagen/bone-collagen-peptides/identity/ Reviewed: 2026-11-19 A bone collagen lot is proved collagen by four measurements that answer four different questions. Protein and hydroxyproline show that the nitrogen belongs to collagen; SEC shows how far the chains have been cut; ash shows the mineral load a bone raw material leaves; and the species and tissue declaration, backed by PCR where needed, shows which animal and which tissue the lot came from. None of them is identity on its own. In one lineCollagen identity is four measurements, not one: protein with hydroxyproline, the peptide distribution, the ash, and the species and tissue behind the declaration. ## The four layers The layers are cumulative. The first answers whether the material is collagen at all, the second describes what the hydrolysis did to it, the third describes what the raw material left behind, and the fourth answers the label question. A supplier who can show only the protein figure has shown the first layer and part of the second. Four identity layers · bovine bone collagen peptides | Layer | Test | Question answered | Composition | Kjeldahl protein and HPLC hydroxyproline | Is the nitrogen collagenous? | Peptide size | SEC | How far has the collagen been cut? | Mineral load | Ash, gravimetric | What did the bone raw material leave? | Source | Species PCR and tissue declaration | Which animal, which tissue? ## Hydroxyproline against the protein figure Hydroxyproline is the marker amino acid of collagen. Plant proteins, milk proteins and whey do not carry it in significant amounts, so a hydroxyproline result above a few percent is the first evidence that the nitrogen is collagenous rather than added. The useful check is the ratio to the protein figure, not either number alone. At the 90.0% protein floor, 8.0% hydroxyproline is 8.9% of the protein and 12.0% is 13.3%. A collagen hydrolysate normally sits inside that band. A lot at the protein floor with hydroxyproline near the bottom of its range has more non-collagen nitrogen than one at the top, and a lot at 12.0% hydroxyproline with a protein figure well below 90% is harder to explain. Neither case is proof of adulteration; both are questions for the supplier. Hydroxyproline cannot separate collagen from gelatin. Gelatin is collagen that has been denatured and partly hydrolysed, and it carries the same amino acid marker. The difference between gelatin and a collagen peptide is the molecular weight distribution, which is why the second layer exists. ## The molecular weight distribution The specification asks for ≥90% of the mass below 3,000 Da by SEC, and the method separates peptides by hydrodynamic volume rather than by mass alone. That is why the certificate should quote the distribution, the column and the calibration, not only a mean. A mean of 2,000 Da can hide a fifth of the material above 10,000 Da, and that fraction is what gels, hazes or settles in a drink. Gelatin shows up here as a high-molecular-weight shoulder that a properly hydrolysed peptide does not have. A blend of peptide and gelatin can still meet the 90% gate if the gelatin fraction is small; the shoulder is the evidence, and it is read from the chromatogram rather than from the pass mark. Ask for the curve on the lot, not a typical curve from the product brochure. ## Ash and the bone raw material Ash is the mineral residue left after the organic matter is burned. Bone is a mineralised tissue, so a bone hydrolysate carries more of it than a hide hydrolysate, and the catalogue allows up to 5.0%. Ash is consistent with the tissue declaration and closes the mass balance: protein, moisture, ash and the remaining fat and carbohydrate should add up to the powder. Ash does not prove bone on its own. A hide lot blended with bone mineral can show a bone-like ash figure, and a thoroughly demineralised bone lot can sit near the hide range. What ash does do is make an unexplained figure visible: a result above 5.0% points to mineral or salt that the specification did not intend, and a result far below the declared tissue is a reason to ask how the lot was demineralised. ## XRD and the mineral fraction Collagen peptides are amorphous, so XRD adds no identity line for the protein: the scan shows a broad halo, and the hydroxyproline marker is measured by HPLC. XRD enters on the mineral side. Ashing a bone lot leaves a poorly crystalline hydroxyapatite pattern that a hide or a plant-derived material would not give, which supports the tissue declaration without proving the species. Two limits keep the test in its place. It reads crystalline phases, not collagen, and a demineralised bone lot can lose most of its hydroxyapatite before the test. It will also show a crystalline mineral filler such as calcium carbonate, which ash alone cannot name but the mass balance and ICP-MS can. On a routine certificate, XRD is a request item, not a release line. ## The adulteration routes Adulteration routes and the test that shows them | Route | What moves | Test | Hide sold as bone | Ash falls below the bone range | Ash, tissue declaration, site audit | Gelatin added | Protein and hydroxyproline stay normal | SEC high-molecular-weight fraction | Non-collagen protein | Protein up, hydroxyproline down | Amino acid profile, hydroxyproline ratio | Maltodextrin or starch | Protein and hydroxyproline down | Mass balance, carbohydrate | Inorganic filler | Ash up, protein down | Ash, ICP-MS The amino acid profile is the most informative single test after hydroxyproline. Collagen has essentially no tryptophan and very little cysteine; a profile that shows either at a meaningful level is carrying protein from somewhere else. Species PCR then answers the animal question, and it is the test that turns a tissue claim into a document. ## What to write into the specification The specification should be specific enough that a second laboratory could reproduce the identity decision. A workable set of lines: bovine bone collagen peptides, CAS 9007-34-5; protein ≥90.0% by Kjeldahl with N × 5.55 on a dry basis; hydroxyproline 8.0–12.0% by HPLC; molecular weight ≥90% below 3,000 Da by SEC with the distribution reported; ash ≤5.0%; loss on drying ≤7.0%; pH 5.0–7.0 in 5% solution; ≥95% through 40 mesh; heavy metals and microbiology as on the COA page; species bovine, tissue bone, origin declared; BSE/TSE declaration and allergen statement attached. The tissue line is the one most often left out. Without it, a certificate cannot distinguish a bone lot from a hide lot, and the bone versus hide page explains why that distinction reaches the label. ## Five questions to put to a supplier - Which tissue and which species is the lot, and is any hide material present in the raw material or the line? - What is the hydroxyproline result on this lot, by which method, and against which protein figure and factor? - Can you send the SEC distribution curve, with the column and the calibration used? - What is the ash limit and the ash result, and how is the bone demineralised? - Which species test was run, and can the BSE/TSE declaration be issued for this lot and this site? The answers belong in the specification file, not only in the email. The compliance page shows how the same evidence feeds the market file, and the product page carries the catalogue ranges. ### 02.1 Bone vs hide collagen: ash, profile and the label URL: https://nutrition.rainwoodbio.com/products/protein-collagen/bone-collagen-peptides/grades/bone-vs-hide/ Reviewed: 2026-11-19 Bone and hide collagen peptides are both type I collagen hydrolysates from cattle, and both can be sold as bovine collagen peptides. The tissue is what separates them: bone is mineralised and leaves ash, hide is the collagen-rich dermis that leaves little, and the two carry different TSE declarations and different label statements. They are not interchangeable on a specification or on a pack. In one lineBone collagen carries the mineral ash and the tissue-specific TSE question; hide collagen carries a lower ash and a different tissue declaration. ## One species, two tissues Bovine type I collagen is the main structural protein of both hide and bone, and the amino acid profile of the two raw materials is close. That is why a single product name, bovine collagen peptides, can cover both. The difference is in what the tissue brings with it. Hide is almost pure collagen and water. Bone is a composite in which collagen fibres are mineralised with hydroxyapatite, and the mineral has to be removed before the material can meet a low ash figure. The hydrolysis step is broadly the same in both cases: the collagen is denatured and cut into peptides, then filtered and dried. What differs is the front end of the process, the ash that survives it, and the paperwork that has to accompany a bone lot. ## Ash: the first number that separates them Ash is the mineral residue left after the organic matter is burned off. The catalogue for bone collagen peptides allows up to 5.0%; a hide grade is usually specified at ≤2.0%. The gap is not a quality difference. It is the residue of a mineralised raw material, and it is the fastest way to tell the two declarations apart on paper. At 5.0% ash, a kilogram of powder carries up to 50 g of mineral material. In a 1 g capsule that is 50 mg of the fill; in a 25 kg drum it is more than a kilogram that is not protein. The figure belongs in the mass balance beside protein, moisture and the remaining fat and carbohydrate, because a specification that fixes protein and moisture but leaves ash open can still deliver a powder that does not add up. Ash does not prove the tissue. A hide lot blended with bone mineral can show a bone-like figure, and a well-demineralised bone lot can sit in the hide range. Read the ash line with the tissue declaration, not instead of it. ## The peptide profile The peptide distribution is set by the hydrolysis and the filtration, not by the tissue. A bone grade and a hide grade from the same plant can be cut to the same SEC curve, and a buyer comparing two certificates should compare the curves rather than the raw material. The catalogue gate is ≥90% of the mass below 3,000 Da, and the distribution behind that gate is what shows in clarity, dissolution and mouthfeel. Where the tissue does show is at the edges. Bone needs a demineralisation step before hydrolysis, and that step can remove some of the fine fraction along with the mineral; hide does not have that step. The result is not a rule about which source is finer, only a reason to ask for the curve on the lot. Odour follows the same logic: a bone hydrolysate can carry a faint broth note, a hide hydrolysate is usually more neutral, and neither is visible in the protein figure. ## BSE and TSE: the file each tissue needs The TSE Regulation (EC) No 999/2001 controls the raw material, the specified risk material and the processing conditions for bovine material in the EU, as of this review; the UK retains equivalent controls. Bone is the tissue those rules were written around, so a bone lot draws a longer file: the age and origin of the animals, the slaughterhouse controls that removed the specified risk material, the processing conditions and the site. The declaration has to be issued for the lot, not for the supplier in general. Hide is not on the specified risk material list, but a hide lot still needs a species and origin statement and a declaration that the animals were fit for human consumption. The file is shorter, not absent. A buyer who is comparing two quotations should compare the two declarations line by line, because a hide quotation that includes a full TSE declaration is not the same offer as one that does not. ## What the label can say “Bovine bone collagen peptides” names the species and the tissue. “Bovine collagen peptides” names the species and leaves the tissue open, and “hydrolysed collagen” names neither. All three can be truthful, but only the first is consistent with a pack that talks about bone, and only the first is consistent with a specification that says bone. If the pack says bone, the specification, the COA and the TSE declaration have to say bone as well. Bovine collagen is not a declared allergen in the EU or the US, so the allergen statement is short. The species statement still matters for religious and consumer positioning, and the tissue statement matters for any market that asks for a TSE file. The compliance page sets out the full document pack. ## When to choose each Choose bone when the label is built on the bone source, when an ash figure up to 5.0% fits the capsule or the stick, and when the supplier can issue a complete TSE declaration for the lot. Choose hide when the formula is ash-sensitive, such as a high-dose clear beverage, when a lower ash makes the mass balance easier to close, or when a more neutral odour matters more than the source story. The protein figure does not decide it: both sources can be specified at ≥90%. The decision is the ash limit, the peptide curve, the declaration and the label word, in that order. The grade comparison puts the two beside each other across the full specification, the identity page covers the tests behind the tissue claim, and the product page carries the catalogue ranges. ### 01 What the COA for micellar casein actually contains URL: https://nutrition.rainwoodbio.com/products/protein-collagen/casein/coa/ Reviewed: 2026-11-19 A certificate for micellar casein answers a narrow question: what did the lot in the drum measure, by which method, and against which limits. Four figures carry most of the answer — protein with its nitrogen factor and basis, ash with the mineral load behind it, lactose as the sugar ceiling, and moisture, which converts every dry-basis figure into the value a customer handles. The remaining lines matter, but they rarely decide the lot on their own. In one lineA micellar casein certificate is read from the protein figure with its nitrogen factor and basis, the ash that carries the mineral load, the lactose ceiling and the moisture that sets the as-is value. ## What the sheet has to list The parameter list follows the specification, not the certificate template. It divides into composition and physical parameters on one side, and contaminants and microbiology on the other, because different people read them and different laboratories run them. Both tables are catalogue limits — the window the grade is sold inside. Particle size is a sieve pass, not a mean diameter, and pH is read on a 5% suspension. A lot certificate adds the measured result, and only the result belongs to that lot. Composition and physical parameters · micellar casein, catalogue limits | Parameter | Method | Release limit | Appearance | Visual | White to off-white, free-flowing powder | Protein (dry basis) | Kjeldahl, N × 6.38 | ≥90.0% | Moisture | Loss on drying | ≤10.0% | Ash | Gravimetric, furnace | ≤2.0% | Fat | Solvent extraction | ≤1.5% | Lactose | HPLC | ≤1.0% | pH (5% suspension) | Potentiometry | 6.5–7.5 | Particle size | Sieve | ≥95% through 80 mesh Contaminants and microbiology · micellar casein, catalogue limits | Parameter | Method | Release limit | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Total plate count | Plate count | ≤10,000 cfu/g | Yeast and mould | Plate count | ≤100 cfu/g | E. coli | Enrichment | Absent | Salmonella | Enrichment | Absent The method column is not decoration. A lead figure without ICP-MS beside it cannot be compared with one from another technique, and a plate count depends on the medium, the temperature and the time. Results without methods are a summary, and a summary is not what an auditor asks for. ## Kjeldahl, the factor and the dry basis Kjeldahl measures nitrogen and converts it to protein with a factor. For milk proteins the factor is 6.38, which assumes nitrogen at about 15.7% of the protein mass; the general factor of 6.25 assumes 16%. The gap is small but real: a lot that reads 90.0% with the dairy factor would read about 88.2% if the general factor were applied to the same nitrogen result. Neither number is wrong, but the factor has to travel with the figure. The basis does more damage than the factor. This specification is on a dry basis, so the 10.0% moisture ceiling is excluded from the protein calculation. At that ceiling a 90.0% dry-basis result corresponds to about 81.0% as-is, and a purchase order that drops the basis is out by nine percentage points before any analytical variation is counted. The certificate should print “dry basis” beside the figure, and the specification should say it in both places. Not all nitrogen is protein nitrogen. Casein carries little non-protein nitrogen, but urea or a nitrogen-rich adulterant would lift the Kjeldahl figure without lifting the protein. The factor and the basis explain the arithmetic, not the source of the nitrogen; that question belongs to the identity page. ## Catalogue range, release limit and lot result Three statements get confused on certificates. The catalogue range is the offer, the release limit is the narrower window agreed for a market or a customer, and the lot result is the measurement. The first two are commitments; only the third is evidence. A certificate that says “conforms to specification” without printing the result offers a conclusion and withholds the measurement. Some parameters are limited and others are reported. Moisture, ash, fat and lactose have ceilings. Appearance is a description, and a colour that stays “off-white” can drift between lots. Particle size can be a sieve pass and still be worth reporting as a distribution, because a five-point change in fines is invisible in a pass-fail line and obvious on a filling line. Everything in the tables above is a catalogue limit. This site publishes the window; it does not publish lot results, lot numbers or customer names. ## What moves between lots Micellar casein starts as skim milk, and skim milk is seasonal. Feed, stage of lactation and herd management move the protein and lactose in the raw milk, and microfiltration can only concentrate what arrives. A higher lactose load puts more work on diafiltration; if the wash is shortened, lactose and ash rise together while the protein still passes on a dry basis. The dryer moves moisture, colour and dispersibility. A hot inlet gives a drier powder that flows well and wets slowly; a gentler dry disperses more easily and holds more moisture. Neither is a defect, but they are not interchangeable in a filling line. Fines migrate to the top of a drum in transit, so the first scoop and the last scoop of one lot can behave differently. A properly taken sample and a retained sample matter more than a grab from the surface. ## When an outside laboratory earns its fee Independent testing is worth it at three moments: a new source, the first shipment into a regulated market, and a dispute where the two laboratories disagree. The panel should answer the open question rather than repeat the certificate: protein by Kjeldahl at a second laboratory, the mineral profile by ICP-OES or ICP-MS, an amino acid profile, SDS-PAGE for the protein pattern, a melamine and cyanuric acid screen, and the microbiological set on the same sample. Two limits are worth stating before the sample is sent. A milk-protein ELISA confirms the material is milk-derived; it does not separate micellar casein from caseinate, because both are milk protein. A nitrogen result, however careful, does not identify the nitrogen source. The ICP-MS method page and the quality page describe how results are kept with the lot. ## What to compare between suppliers Put six lines side by side: protein with its factor and basis; ash with the calcium and sodium figures behind it; lactose; moisture; particle size and a dispersion result; and the allergen statement with site and lot traceability. Two offers that agree on 90% protein and disagree on the other five are not the same material, even when both are called micellar casein. The second layer is the record: which site made the lot, which milk batch went in, which membrane and dryer were used, and what retained sample exists. A certificate can be accurate and still describe a different lot from the one that arrives. The grade comparison explains why ash is the first line to check when the form is in doubt, and the COA glossary entry defines the document. The specification behind the certificate is summarised on the micellar casein product page. ### 02 Micellar casein or caseinate: choosing a casein grade URL: https://nutrition.rainwoodbio.com/products/protein-collagen/casein/grades/ Reviewed: 2026-11-19 Casein is one name for several materials. Micellar casein keeps the micelle in the form it has in milk; calcium caseinate and sodium caseinate are made by dissolving acid-precipitated casein with an alkali and drying the result. All three can read a similar protein figure, and the name on the certificate often stops at “casein”, so the grade cannot be chosen from the headline. The choice is made on mineral load, dispersion and the ingredient name the label has to carry. In one lineThe grade decision is the form of the casein — micellar or caseinate — because that choice sets the mineral load, the dispersion behaviour and the ingredient name on the label. ## Why the form is the grade Casein is the family name. CAS 9000-71-9 identifies casein rather than a physical form, and the caseinate salts are listed separately in their own right. The form is created by the process, so a buyer choosing a grade is really choosing a process and the properties that come with it. A micellar grade is a filtered milk protein: the membrane holds back the micelle and lets the smaller milk solids through, so the protein is concentrated without dissolving the structure. A caseinate is a neutralised acid casein: the protein is precipitated, washed and then redissolved with calcium or sodium hydroxide, which leaves the cation in the powder. The micellar versus caseinate page sets out both processes step by step; for the grade decision, the point is that one route keeps the micelle and the other does not. That difference in route is why two powders that both read 90% protein can carry different ash, different calcium and sodium, and different behaviour in water. It is also why the word on the label cannot be swapped silently: micellar casein, calcium caseinate and sodium caseinate are different ingredients in a recipe and in a declaration. ## The three forms side by side Casein forms · what changes with the grade | Point | Micellar casein | Calcium caseinate | Sodium caseinate | Protein basis | ≥90% dry basis for this grade | Agreed in the specification | Agreed in the specification | Ash and cation | Low ash; native mineral load | Higher ash; calcium added | Higher ash; sodium added | In water | Dispersible, not soluble | Disperses; partly colloidal | Soluble over a wide pH range | Dispersion | Swelling, high shear, time | Faster, lower shear | Fastest of the three | Mouthfeel | Thick, creamy body | Creamy, less body | Smooth, can be thin | Heat | Thickens; trial the process | Generally more tolerant | Generally more tolerant | Label name | Micellar casein; milk declared | Calcium caseinate; milk declared | Sodium caseinate; milk declared The table describes directions, not guarantees. The specification for any form is agreed with the supplier, and the ash figure is the clearest marker of which form is in the drum. The micellar versus caseinate page takes the mineral and dispersion differences further. ## What changes in the drum and in the mixer This grade is a spray-dried powder at 80 mesh, with at least 95% passing, and it can be supplied agglomerated or instantized on request. Agglomeration builds larger, porous particles that wet faster and throw less dust; it also lowers bulk density, which changes how the powder fills a sachet and how much fits in a scoop. A straight 80 mesh grade is the simpler physical form to make and the harder one to disperse without lumps. In water the difference is larger than it looks on paper. Micellar casein swells, hydrates and thickens. It needs enough shear and enough time, and it will settle if the dispersion is left standing. Caseinate dissolves or disperses quickly and is used as an emulsifier as much as a protein. Neither behaviour is better in the abstract; they answer different formulation questions, and a mixer that suits one can fail on the other. ## How much the formula can carry The practical limit is usually viscosity, not solubility. A drink carrying 20 g of micellar casein per serving behaves differently from one carrying 10 g at the same total protein: it thickens faster, holds more air and sediments more readily. Caseinate tolerates higher solids in some systems, but it brings its cation with it, which matters when the formula already carries calcium or sodium from other ingredients. A bar is a different constraint. Water activity rather than solubility decides how the protein behaves, and the texture can firm up over shelf life. A stick pack sits between the two: the powder has to flow into the sachet, disperse in a shaker, and stay free-flowing after the pack has been opened. Trial the form in the real matrix at the real load before the specification is fixed, because a bench result does not stand in for a bar. ## What to write into the specification The form belongs in the first line, not in a note. A specification that says only “casein” leaves the supplier free to ship the form that is easiest that month, and the label may then name an ingredient the certificate does not support. The lines below make the form testable. - Form and process: micellar casein, separated by microfiltration from skim milk. - Protein: ≥90.0% on a dry basis, Kjeldahl with N × 6.38, factor and basis printed. - Composition: moisture ≤10.0%, ash ≤2.0%, fat ≤1.5%, lactose ≤1.0%. - Physical: pH 6.5–7.5 on a 5% suspension; ≥95% through 80 mesh, or the agglomerated equivalent. - Dispersion: the test method, the shear, the time and the residue or sediment limit. - Allergen: milk declared, with the statement on the specification and on the COA. - Contaminants and microbiology: the limits on the COA page. The dispersion line is the one most often left vague. Agree a test — grams per 100 mL, water temperature, shear and standing time — and write the result format into the specification. Without it, two suppliers can both claim “good dispersibility” and mean different things. ## When micellar is not the right answer A caseinate is the better starting point when the drink has to be clear, heat-stable or emulsified, and when the label can carry the extra sodium or calcium. Choose a whey grade when the formula is built around whey protein and the casein form is there only to add protein. Choose the standard 80 mesh micellar grade when the plant has a high-shear mixer and the time to hydrate it; agglomeration buys speed, not protein. Staying with one grade across a product line is often worth more than optimising each SKU. A second form means a second specification, a second allergen statement, a second dispersion trial and a second line on the label. The switch should be justified by the formula, not by a small difference in the certificate. For the market rules that follow the label name, see the compliance page; for the particle-size definition, the glossary entry covers the sieve convention. The micellar casein product page carries the full catalogue specification. ### 03 Micellar casein is stable dry; moisture and heat decide the rest URL: https://nutrition.rainwoodbio.com/products/protein-collagen/casein/stability/ Reviewed: 2026-11-19 Micellar casein is a dry powder, and dry is the state in which it keeps. The failures that matter in practice are moisture picked up from the air, which turns a free-flowing powder into a caked one; heat and moisture together, which brown the powder and move its flavour; and a dispersion that thickens or sediments after the powder has been wetted. None of the three shows up in the protein figure, which is why a stability programme has to look past assay. In one lineDry micellar casein keeps on moisture and temperature, and the failures to design against are caking in the bag, browning in the bar and a dispersion that thickens after filling. ## The dry powder At the 10.0% moisture ceiling the powder is shelf-stable in a sealed pack, but it is not indifferent to the air around it. Casein is hygroscopic enough that an opened bag in a humid room takes up water at the surface first, and the surface is where caking begins. The fines in a drum have the largest surface area for their mass, so they are the first part to clump. A cake that forms in the top layer is not a small cosmetic problem: it changes the bulk density, blocks feeders and makes the scoop weight inconsistent. Lactose is capped at 1.0%, which limits but does not remove the Maillard browning reaction between the sugar and the protein. The reaction needs moisture and heat as well, so a dry powder at ambient temperature is slow to colour. The same powder in a humid warehouse, or in a bar that carries water from a syrup or a humectant, is a different case. ## In dispersion Micellar casein does not dissolve; it swells. The micelles hydrate, the viscosity rises, and the powder needs shear and time before it is fully wetted. A dispersion that is mixed for two minutes and filled immediately can keep swelling in the tank and thicken after filling. The powder also sediments on standing, which is why a drink has to be formulated and processed as a suspension rather than a solution. Heat is the second variable. A micellar casein dispersion is not a heat-stable solution in the way a caseinate is: at higher solids, or with calcium present, heating can thicken it sharply or set it. A neutral pH helps; near the isoelectric point at pH 4.6 the protein aggregates and the drink separates. Any heat process, from pasteurisation to UHT, has to be trialled on the real dispersion, not on a diluted laboratory sample. ## What actually moves the result Stability factors · what to control and what it changes | Factor | Effect on the powder | Relative humidity | Moisture uptake, caking, lactose mobility | Temperature | Browning rate, flavour drift, microbial growth in a wet pack | Oxygen and light | Off-flavour development, colour fade | Metal ions | Iron and copper accelerate oxidation and browning | Pack integrity | Liner pinholes and poor seals admit moisture | Headspace | Oxygen load and moisture migration in the pack The order of importance depends on the pack. A 25 kg drum with a sealed liner travels through a longer and harsher chain than a 1 kg pouch, so the drum is more exposed to humidity and to handling damage. A sachet is exposed to the filling room, where the air can be the dampest place the powder ever sees. ## The test protocol A stability programme for this grade is built from three conditions: an accelerated set at 40 °C and 75% relative humidity, an intermediate set at 30 °C and 65%, and a real-time set at 25 °C and 60%. The accelerated set finds failures early; the real-time set assigns the shelf life. The two sets do not always agree, which is why the accelerated result is a signal and not a release criterion. Test the powder in the pack it will ship in, not in a laboratory jar. At each pull, record moisture, appearance and flow, then re-disperse the sample and record the dispersion behaviour: wetting time, lumps, viscosity and sediment. Add microbiology at the start and the end, and a sensory check at every pull. The loss-on-drying entry explains why the moisture result is method-dependent, and the quality page describes how the samples are retained. ## Formulation and packaging A bar is the hardest common matrix. Water migrates from the syrup phase into the protein over the first weeks, the powder hydrates slowly, and the bar firms up. A humectant that keeps the bar soft also feeds the browning reaction. The practical answer is to keep water activity low, buffer the pH away from the protein's isoelectric point, and accept that the texture at week one is not the texture at month six. A drink is a different problem: the powder has to hydrate fully before the heat process, and the process has to be gentle enough not to set the dispersion. A stick pack is simpler, but the powder still has to flow into the sachet and disperse in a shaker without lumps. Packaging does part of the work: a foil pouch or a drum with a sealed liner keeps moisture out, and a nitrogen flush reduces the oxygen load where the flavour is sensitive. ## How shelf life is assigned Shelf life is a conclusion from stability data on the specific pack, not a property of the ingredient. A dry micellar casein in an intact foil pouch or drum is commonly assigned 18 to 24 months, and the number should come from the real-time set, the pack and the storage condition the label states. A supplier that quotes a shelf life without stating the pack and the storage condition has quoted a number without a basis. Two dates matter commercially. The production date sets the shelf life; the remaining shelf life on arrival decides whether the lot can be used. A buyer taking a 24-month material on a long sea route can receive a lot with 18 months left, which is fine for a fast-moving powder and tight for a bar with its own 12-month date. Put a minimum remaining shelf life in the purchase order, and check the packing list against it. The ordering page covers the pack and lead-time side, and the COA page covers the moisture and lactose figures that drive the behaviour described here. The specification is set out on the micellar casein product page. ### 04 Micellar casein: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/protein-collagen/casein/moq/ Reviewed: 2026-11-19 The minimum is one kilogram because the first question a formulator has to answer is whether the powder disperses in the mixer, and a 25 kg drum cannot answer it. The drum is the production pack; the pouch is the trial pack. Lead time, the document pack and the agreed specification decide whether an order ships, and the minimum only decides how the conversation starts. In one lineThe 1 kg pouch exists so a formulator can test dispersion before a 25 kg drum is ordered, and a quotation should answer the specification before it answers the quantity. ## Why the minimum is 1 kg A protein powder is not bought on a certificate alone. It has to wet out in the plant's mixer, flow through the feeder, survive the flavour system and, in a bar, hold its texture for the length of the shelf life. None of those can be tested on 50 g. A kilogram is enough for a bench trial, a small pilot mix and a retained sample, which is why it is the smallest pack that answers a real question. The pouch is filled from bulk under controlled conditions and carries the same lot number as the drum it came from. That matters: a sample from a different lot, or a hand-filled bag with no lot number, cannot be compared with the production material later. Ask for the sample to be drawn from a production lot and labelled with the lot, the production date and the pack size. The minimum is a handling limit, not a commercial threshold. Repacking a kilogram takes time, a clean area and a label, and the trial pack is handled as a pack rather than as a fraction of a drum. The useful comparison is between suppliers who ship the same pack with the same documents; a smaller bag with no COA is not a shorter path to a decision; it is a decision without evidence. ## The two packs Standard packs · micellar casein | Pack | Use | What to check on arrival | 1 kg foil pouch | Trial, sample, small batch | Seal, lot number, production date, allergen statement | 25 kg fiber drum | Production, blending, repacking | Liner integrity, drum condition, net weight, label Both packs have an inner liner, and the liner is the moisture barrier. A drum that has been dropped can crack the liner without showing damage on the outside, so the liner is worth checking before the drum is opened. The pouch is the easier pack to reseal and the easier one to leave open; a half-used pouch in a humid room will cake at the surface, which is a storage failure rather than a material failure. Agglomerated and instantized versions are available on request. They come in the same nominal packs but at a lower bulk density, so the fill weight is the same and the volume is not. If the packing line is set for a fixed volume, confirm the bulk density before the first drum is ordered. ## Lead time The standard pack is quoted at one to seven working days, depending on the quantity and the stock position at the time of the order. The range is wide because a single pouch and a pallet of drums do not move through the same steps. A custom form — a different mesh, an agglomerated grade, a blend — starts after that range and needs its own schedule. Documents travel with the shipment, and a complete set should be ready before the goods leave rather than after they arrive. If a customer needs a specific COA format, a third-party report or a legalised document, say so in the enquiry, because those additions change the date. The COA page lists what the standard certificate contains. ## What a quotation has to answer Six lines decide whether two quotations describe the same material. If one is missing, the comparison is incomplete whatever the total says. A complete quotation · the six lines | Line | What it should state | Specification | The form, the revision and the protein basis with its factor | Physical form | 80 mesh, agglomerated or instantized; bulk density if relevant | Pack and quantity | 1 kg pouch or 25 kg drum, number of packs, net weight | Delivery | Incoterm, named place and the expected transit | Documents | COA, specification, allergen statement, SDS and origin | Lead time | Dispatch date, allocation and remaining shelf life on arrival A quotation that names only the product and the quantity leaves the buyer to guess at five of the six. The grade page explains why the form belongs on the first line and not in a footnote. ## The sample, and what to do with it Order the sample against the specification you intend to buy, not against a generic grade. When it arrives, split it: one part for the bench trial, one part retained in the original pack. Record the lot number, the date and the conditions in the trial report. If the trial fails, the retained sample is the only way to tell whether the powder changed or the trial did. Test in this order: dispersion in the plant's water at the plant's temperature, then the feeder, then the flavour system, then the finished format. A powder that disperses in a laboratory blender can still bridge in a hopper, and a powder that tastes neutral in water can change in a bar over a month. The stability page sets out what to measure while the trial runs. ## Terms worth agreeing before the first drum Write the minimum quantity per line, the pack, the specification revision and the minimum remaining shelf life into the purchase order. Agree what happens if a lot fails the specification on arrival: who pays for the return, whether a replacement is allocated from the next production, and how the retained sample is used in the discussion. Agree the document set that must accompany each shipment, and the point at which the buyer takes title and risk. These are ordinary terms, but they are the ones that decide whether a second order is easy. The MOQ glossary entry defines the quantity convention, and the logistics page covers the movement side. The pack, the form and the specification are on the micellar casein product page. ### 05 Where micellar casein is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/protein-collagen/casein/compliance/ Reviewed: 2026-11-19 Casein is a permitted food ingredient in all three markets this site supplies, and the ingredient needs no pre-market approval. What decides a launch is the milk allergen declaration, the conditions attached to a protein claim, the contaminant limits for the product as sold, and the file behind them. The form changes the label name and the mineral load, not the permission to sell. In one lineMicellar casein is a food ingredient in the EU, the US and the UK; the form is not the regulatory question, but the milk allergen, the protein claim and the contaminant file are. ## The four checks The first check is whether the material is a permitted food ingredient. The second is whether it triggers an allergen declaration, which for any casein means milk. The third is whether the contaminants are inside the limit for the product as sold. The fourth is whether the label and claims are worded the way the market allows. Each check has a different owner: status with the supplier and importer, the allergen with the recipe and label, the limit with the food category, the claim with the brand. A file that answers three of the four is incomplete, and the missing one is usually the allergen statement because the powder is “just protein”. ## European Union Casein has a long history of food use in the EU and is not, as far as this review can establish, a novel food. The current novel food catalogue should still be checked before a new source is launched. Allergen labelling follows Regulation (EU) No 1169/2011. Milk and products thereof, including lactose, are on the Annex II list, so “milk” has to appear in the ingredient list and be emphasised. A lactose figure of 1.0% or less changes the sugar content, not the allergen status: the product still contains milk protein. Food supplements fall under Directive 2002/46/EC, which harmonises the vitamin and mineral lists but leaves other ingredients, proteins included, to national rules. Contaminants fall under Regulation (EU) 2023/915, which replaced Regulation (EC) No 1881/2006, and claims under Regulation (EC) No 1924/2006. ## United States Casein is a dietary ingredient in supplements and a food ingredient in conventional foods. The facility has to meet the applicable GMP rules — 21 CFR 111 for a supplement, 21 CFR 117 for a food — and the label the food labelling rules. The supplier should state the basis for the intended use, and the buyer should keep it in the file. Milk is a major food allergen under FALCPA, so a supplement that contains casein has to declare it — in the ingredient list, in a “Contains” statement, or both. The declaration follows the protein, not the lactose figure, so a low-lactose casein is still a milk-containing ingredient. Protein claims are nutrient content claims under 21 CFR 101.54: “good source” at 10% or more of the Daily Value per serving, “excellent source” at 20% or more, with protein at 50 g per day. California Proposition 65 may also apply to lead, and its threshold is daily-intake based, so a lot inside a specification can still trigger a warning at a high daily portion. ## United Kingdom The UK applies retained food law with its own amendments. The Food Information Regulations 2014 carry the 14 allergens, milk among them, and require the allergen information to be emphasised; the Food Supplements (England) Regulations 2003 and their devolved equivalents set the framework. Claims follow the retained 1924/2006 regime, contaminants the retained GB text. Two points differ from the EU: the label needs a UK address for the responsible business, and GB and Northern Ireland are checked separately, because Northern Ireland applies EU food law under the Windsor Framework. ## The contaminant table Contaminant limits · casein sold as a food supplement, by market | Element | EU | US | UK | Lead | 3.0 mg/kg | No federal limit for supplements; state rules apply | Retained GB limit; check the current text | Cadmium | 1.0 mg/kg | No federal limit for supplements | Retained GB limit; check the current text | Mercury | 0.10 mg/kg | No federal limit for supplements | Retained GB limit; check the current text | Arsenic | Not harmonised; member state rules may apply | No federal limit for supplements | Check the current GB text The EU figures come from Regulation (EU) 2023/915 and apply to supplements as sold. A casein sold as an ingredient to a food manufacturer is assessed against the limit for the food category it enters, which can be tighter or looser. Arsenic is not harmonised at EU level, so the specification has to state which limit it is tested against. The catalogue limits here sit inside those frameworks, arsenic as a customer limit. ## Claims and label wording No disease-related claim is permitted in any of the three markets. Protein claims are separate: in the EU, “source of protein” requires at least 12% of the energy value from protein and “high protein” at least 20%; in the US the thresholds are the 10% and 20% Daily Value figures; the UK follows the retained EU conditions. Whether a supplement is assessed per daily portion or per 100 g should be confirmed with the market before the label is set. “Micellar” describes the physical form. It can sit beside the ingredient name, but it carries no health claim and does not replace the milk declaration. “Dairy-free” and “lactose-free” are separate claims with their own basis, and neither is available for a product that contains milk protein. This site makes no claim about the effect of the form; the pack wording belongs to the brand and the market. ## The document pack - Specification with the revision, the form and the protein factor and basis. - Batch COA with the results and the methods, not only a conformity statement. - Allergen statement naming milk, repeated on the COA. - Animal-origin and BSE/TSE statement; milk is not a TSE-relevant tissue, but buyers ask for the declaration. - GMP, HACCP or ISO certificates for the site that made the lot. - Origin, non-GMO and halal or kosher statements where required. - Third-party report where the buyer's market or customer asks for one. ## What to check before the first order - Is the form named on the specification, and does it match the ingredient list? - Is milk declared on the label and on the allergen statement, with no dairy-free wording? - Do the contaminant results meet the limit for the product as sold in the destination? - Is the protein claim based on the protein as consumed, with the factor and basis stated? - Does the file include the COA with methods, the specification revision and the site certificates? - Has the current GB and EU text been checked this year, not at the last launch? The COA page explains how the limits are read, the identity page covers the evidence behind the form, and the EU, US and UK summaries give the framework. The Annex II entry covers the allergen, the quality page the file, and the specification behind it is on the micellar casein product page. ### 06 How we prove a casein lot is micellar casein URL: https://nutrition.rainwoodbio.com/products/protein-collagen/casein/identity/ Reviewed: 2026-11-19 A casein certificate can name the same protein in several physical forms, so identity is proved in layers rather than by a single test. The layers are the paper file, the nitrogen and mineral analytics, the way the powder behaves in water, and the trail from a micelle-preserving process to the lot in the drum. No one of them separates micellar casein from caseinate on its own; together they leave little room for a substitution. In one lineA casein lot is micellar because the process preserved the micelle and the analytics show it — the protein figure, the ash and mineral profile, the dispersion and the traceable lot file together. ## The four layers The first layer is the paper: the specification, the form, the process, the site, the lot number, the allergen statement and CAS 9000-71-9, which identifies casein rather than the form. It proves intent and traceability, not identity, because a document can describe a material that was never made. The second layer is the analytical set: protein by Kjeldahl with its factor and basis, ash by gravimetry, calcium, sodium and phosphorus by ICP, lactose, and the protein pattern by SDS-PAGE. The third layer is behaviour. Micellar casein swells and thickens; caseinate dissolves or disperses quickly. A dispersion test run the same way on both materials separates them more reliably than a certificate line. The fourth layer is provenance: which site, which membrane, which dryer, which milk batch, and whether the retained sample carries the same lot number as the bag and the COA. Faking a document is easy; faking a process trail and a retained sample is not. ## The nitrogen factor and the protein-to-ash ratio Kjeldahl measures nitrogen, so the protein figure is arithmetic: nitrogen times 6.38 for milk protein, expressed on a dry basis at a 10.0% moisture ceiling. A lot that reads 90.0% dry basis reads about 81.0% as-is at that ceiling, and the gap is where most label and purchase-order errors live. The factor and the basis belong in the same sentence as the figure. The mineral side is the second arithmetic check. At 90% protein and 2.0% ash, the lot carries roughly 45 parts protein to one part ash. A caseinate with the same protein and, say, 5% ash sits near 18 to one, because the neutralising cation stays in the powder. That ratio is not a specification and does not prove anything on its own, but it is the quickest screen for a form switch. The dry-basis maxima also do not add to 100 — 90% protein, 2% ash, 1.5% fat and 1% lactose leave about 5.5% for other dry matter — which is normal for ceilings and worth knowing before a mass balance is used as evidence. ## What XRD, FTIR and the mineral panel can show X-ray diffraction is the wrong tool for this material, and it is worth saying so. Casein is amorphous: a diffractogram shows a broad halo and no crystalline peaks, so XRD can confirm that the powder is not a crystalline mineral salt but cannot separate micellar casein from caseinate. A laboratory that offers an XRD identity test for casein is selling a pattern that will look the same for both forms. FTIR is more informative but still not a release test. The amide I and amide II bands show that the material is protein, and the shape of the amide I band changes with the secondary structure, which differs somewhat between the micellar and the dissolved form. The difference is subtle and method-dependent; it belongs in a dispute file, not in a routine specification. The practical analytical layer is the mineral panel: calcium, sodium, potassium, magnesium and phosphorus by ICP-OES or ICP-MS, read beside the ash figure. Casein carries protein-bound phosphate that whey carries only at much lower levels, and the mineral pattern, read beside the ash figure, separates the three forms: sodium caseinate carries added sodium, calcium caseinate added calcium, and micellar casein the calcium and phosphate that stayed with the micelle. The FTIR method page sets out what the spectrum can and cannot support. ## The adulteration routes and their markers Substitution routes · what gives them away | Route | Marker | Test | Caseinate for micellar | Higher ash; sodium or calcium up | Ash, ICP-OES, dispersion | Whey protein added | Amino acid pattern shifts; lactose may rise | Amino acid profile, SDS-PAGE, lactose by HPLC | Plant protein added | Amino acid pattern shifts; foreign bands | Amino acid profile, SDS-PAGE | Nitrogen booster added | Protein high, amino acids low | Kjeldahl plus amino acid profile; melamine and cyanuric acid screen | Lower-protein milk powder | Lactose and ash up together | Lactose, ash, protein on a dry basis Melamine deserves a line of its own because it is 67% nitrogen by mass, so a small addition lifts Kjeldahl without adding protein. A melamine and cyanuric acid screen is not part of the catalogue specification, but it is a sensible third-party test on a new milk-protein source, and it is a small test beside the consequence of a recall. Urea does the same thing on a smaller scale and is caught by the same logic: the nitrogen figure rises while the amino acid profile does not. ## How to write the form into the specification A specification proves the form only if it makes the form testable. Write the process in the first line — micellar casein separated from skim milk by microfiltration — then require the protein on a dry basis with N × 6.38, the ash ceiling, the calcium and sodium figures, the lactose ceiling and the moisture ceiling. Add a dispersion test with the specified shear, hydration time and sediment limit, and a mesh line for the physical form. Require the allergen statement, the lot number and the site on the COA, and keep a retained sample from every lot. The COA page lists the full parameter set, and the grade page explains what changes when the form changes. The comparison with caseinate in detail is on micellar casein versus caseinate. ## Five questions to put to a supplier - Which process made this lot — microfiltration from skim milk, or acid precipitation and neutralisation? - What are the ash, calcium, sodium and phosphorus figures, and what does the specification allow? - What dispersion test do you run, and what did this lot give in it? - Can you supply the amino acid profile, the SDS-PAGE pattern and a melamine screen on this lot? - Which site made the lot, and will the bag, COA and retained sample carry the same lot number? A supplier who answers all five with documents is selling a form; one who answers the first and the fifth with a brochure is selling a name. The micellar casein product page lists the catalogue ranges these answers are checked against, and the quality page describes the retained-sample system. ### 02.1 Micellar casein vs caseinate: minerals, dispersion and the label URL: https://nutrition.rainwoodbio.com/products/protein-collagen/casein/grades/micellar-vs-caseinate/ Reviewed: 2026-11-19 Micellar casein and caseinate are both casein, and the difference is physical: one retains the micelle found in milk, the other dissolves it with alkali and dries the result. The choice changes the mineral load, the way the powder disperses, the heat behaviour and the ingredient declaration. Neither is the better material; each answers a different formulation problem. In one lineMicellar casein and caseinate are the same protein in different physical states, so the mineral load, the dispersion and the ingredient declaration move together when the form changes. ## Two processes, two materials Micellar casein is separated from skim milk by microfiltration. The membrane holds back the casein micelle, which is a natural aggregate of casein proteins with colloidal calcium phosphate, and lets lactose, whey protein and part of the minerals pass into the permeate. Diafiltration washes the retentate, and spray drying turns it into a powder that still contains the micelle. The process concentrates the protein to 90% on a dry basis without dissolving the structure. Caseinate starts the other way. Skim milk is acidified to the isoelectric point of casein, around pH 4.6, where the protein precipitates. The curd is washed, which removes lactose and much of the colloidal calcium phosphate, and dried to acid casein. That intermediate is then neutralised with calcium hydroxide or sodium hydroxide, which dissolves the protein, and spray-dried as calcium caseinate or sodium caseinate. The micelle does not survive the acid step, and the neutralising cation stays in the powder. The process is the ingredient name. A certificate that says “casein” without naming the route has not told the buyer which of these materials is in the drum, and the two behave differently enough that the gap cannot be closed by adjusting the dosage. ## Protein, ash and the cation The protein figure can be identical on both certificates and still describe different materials. At 90% protein on a dry basis, micellar casein carries an ash load inside the 2.0% catalogue ceiling, with calcium and phosphorus from the native micelle. A caseinate at the same protein carries more ash, because the sodium or calcium added in neutralisation remains in the powder. The difference is not an impurity; it is the chemistry of the form. The mineral load by form · direction, not a specification | Form | Ash | Cation | What it changes in the formula | Micellar casein | Low; catalogue ≤2.0% | Native calcium and phosphate | Lower mineral load; body and texture | Calcium caseinate | Higher | Added calcium | Calcium contribution to the label | Sodium caseinate | Higher | Added sodium | Sodium contribution to the label The label consequences are concrete. In the EU nutrition declaration, sodium is declared and converted to salt; in the US it appears in the Supplement Facts or Nutrition Facts panel. A form switch that is not accompanied by a label review can move the sodium figure, the calcium figure and the ingredient name at the same time. The COA page shows where ash and the mineral panel sit on the certificate. ## Dispersion is the visible difference Micellar casein swells rather than dissolving. The micelles take up water, the viscosity climbs, and full hydration takes shear and time. A dispersion mixed briefly and filled can keep thickening in the tank, and it will settle if it is left standing. The 80 mesh grade disperses with the right mixer, and an agglomerated or instantized version wets faster and throws less dust, but neither makes the material soluble. Caseinate disperses or dissolves quickly. Sodium caseinate is the more soluble of the two and is used where a clear or near-clear system matters; calcium caseinate gives a colloidal dispersion rather than a true solution. Both tolerate heat better than a concentrated micellar dispersion in most systems, which is why a retorted or high-heat drink often starts with a caseinate. pH decides as much as the form. Near pH 4.6 the casein approaches its isoelectric point and aggregates, so an acidified drink needs a stabiliser and a trial whatever the form. At neutral pH the micellar dispersion is stable but viscous, and the caseinate is stable and thin. The mixer, the solids load and the heat process have to be tested together; a dispersion result in water does not predict a result in the finished drink. ## Which format each form fits Format fit · where each form usually starts | Format | Micellar casein | Caseinate | Neutral RTD drink | Possible with homogenisation and a heat trial | Common; more heat-tolerant | Powder stick or sachet | Works; agglomeration helps dispersion | Works; dissolves faster in a shaker | Protein bar | Adds body; texture firms over shelf life | Used for texture and emulsification | Acidified drink | Aggregates near pH 4.6; needs stabiliser | More tolerant, still needs a trial The table is a starting point, not a rule. A bar and a stick pack put the same powder under different stresses: the bar is a moisture-migration problem over months, the stick is a dispersion problem over seconds. Trial the form in the format and at the load that will be sold, and keep the trial report with the specification. ## What the label has to say The ingredient declaration has to name what is in the product. The three forms carry three different names, and a pack cannot use one while the drum contains another. In the EU the ingredient list has to use the legal or customary name, and milk has to be emphasised as the allergen under Regulation (EU) No 1169/2011; in the US, milk is a major allergen under FALCPA and the form is named in the ingredient statement; the UK follows the retained EU rules. “Micellar” is a description of the physical form, not a health claim, and it does not remove the milk declaration. “Dairy-free” and “lactose-free” need their own basis: a casein with 1.0% lactose or less is still milk protein and should not be called dairy-free. The compliance page sets out the allergen, contaminant and claim rules market by market. ## When to choose which Choose micellar casein when the label has to say micellar, when the formula wants body and a lower mineral load, when the product is a bar or a powder, and when the plant has the shear and the time to hydrate it. Choose a caseinate when solubility, clarity, heat tolerance or emulsification matter more than the micellar form, and when the added sodium or calcium fits the label. Choose neither on the protein percentage alone. The decision should be made on four lines side by side: the form and process, the ash and cation, the dispersion result in the real mixer, and the ingredient name the label needs. The grade comparison covers the wider choice, the identity page covers the evidence that the form is what it says, and the catalogue ranges are on the micellar casein product page. ### 01 What the COA for fish collagen peptides actually contains URL: https://nutrition.rainwoodbio.com/products/protein-collagen/fish-collagen-peptides/coa/ Reviewed: 2026-11-19 A fish collagen certificate answers four questions at once: how much protein the powder carries and by which factor it was calculated, how much hydroxyproline sits inside that protein, how the peptides are distributed by size, and which species and tissue the lot came from. The catalogue ranges set the window; the batch COA confirms where the shipped lot measured. Numbers without their methods cannot be compared with another supplier's. In one lineA fish collagen certificate is only readable when the protein factor, the hydroxyproline figure, the SEC distribution and the species are stated together with their methods. ## The parameters on the sheet Nine lines carry the specification, each with the method beside it. A hydroxyproline result by HPLC and one by colorimetric assay are different measurements, and a molecular weight cut-off without the chromatographic method is a claim rather than a result. The table is the catalogue specification, not a lot result. COA parameter list · fish skin collagen peptides, catalogue specification | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Protein | Kjeldahl, N × 5.55, dry basis | ≥90.0% | Hydroxyproline | HPLC | 8.0–12.0% | Molecular weight | SEC | ≥90% below 3,000 Da | Loss on drying | Gravimetric, 105 °C | ≤7.0% | Ash | Gravimetric, furnace | ≤2.0% | pH (5% solution) | Potentiometry | 5.0–7.0 | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and enrichment | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent Particle size belongs on the same certificate: ≥95% through 40 mesh, checked by sieve. It governs flow, dust and wetting, and it is one of the first lines to disappear when a specification is copied from another product. The species and tissue produce no number but belong on the sheet as well: fish skin, fish scale and bovine hide are separate label ingredients, and the CAS number, 9007-34-5, names collagen as a class without naming the species. The identity page sets out how that declaration is supported. ## The factor behind the protein figure The Kjeldahl result is a nitrogen figure, not a protein figure. The digest is titrated and the nitrogen multiplied by a conversion factor, a convention for a class of material rather than a property of the powder. Collagen uses N × 5.55 because it carries close to 18% nitrogen; a general food protein uses N × 6.25, which assumes 16%. The same nitrogen result therefore gives two percentages. Because 6.25 is about 12.6% larger than 5.55, a 90.0% result becomes roughly 101% when the factor changes. The second figure does not mean a richer powder; the convention changed, not the material. A certificate that omits the factor cannot be compared with one that names it. The basis matters as much. The catalogue figure is on a dry basis; at the 7.0% moisture limit, 90.0% dry corresponds to about 83.7% as-is, which is the number a formulation has to use. Mixing the two bases introduces a several-point error before any analytical variation is counted. Kjeldahl also cannot separate peptide nitrogen from urea or ammonium nitrogen, which is why the protein figure is read beside the hydroxyproline result rather than alone. ## Range, limit and lot result A release limit is the window a lot must fall inside; a lot result is what the laboratory measured. Both belong on the sheet, with the method named. “Conforms” on its own is a verdict with no evidence attached. The molecular weight line needs more than a pass mark. The specification can require ≥90% of the mass below 3,000 Da, and a lot can meet that gate while sitting at the high end of it. The certificate should report the measured distribution, not only the cut-off, because the same gate can hide a powder that dissolves slowly and one that dissolves cleanly. The specification described here is a catalogue specification. It sets what the material should meet; the batch COA confirms the lot that ships. No page on this site reports a batch number or a lot result. ## Lot-to-lot movement The raw material moves first. Skin from a filleting line is wet and fatty, and its composition depends on the species, the season and how quickly it was chilled. A plant running several species produces a peptide whose hydroxyproline and amino acid profile shift with the mix, even when the hydrolysis programme is unchanged. Hydrolysis moves next. Time, temperature and enzyme dose decide how far the chains are cut and how much of the material falls below 3,000 Da. How much of the fine fraction survives depends on filtration and concentration; the spray dryer then fixes the moisture, the particle size and some of the colour. Smell is the hardest thing to put a number on, and often the most informative. A marine or broth note can strengthen with moisture and with storage temperature, and a lot can pass every number while smelling unlike the previous drum. Ask for the retained sample and the storage history rather than rejecting the lot on the protein figure. ## When an outside laboratory earns its fee Go outside when the source is new, when the first commercial lot is heading into a regulated market, or when the label names a species the certificate does not prove. The panel that closes the open question is small: hydroxyproline and the amino acid profile for collagen identity, SEC for the distribution, a species-specific PCR on the raw tissue or a validated finished-product method, and ICP-MS for contaminants on the same sample. A dispute is another reason to go outside: send the retained sample, the certificate and the specification, and ask only for the tests that separate the competing explanations. The quality page shows how the batch file and the retained sample travel together. ## Six lines to compare Put six lines side by side: the species and tissue; the protein figure with its factor and basis; hydroxyproline with its method; the SEC distribution with its method; moisture, ash, pH and particle size; and the allergen statement with the country of origin. Two quotations that agree on the protein percentage and disagree on the other five are not quoting the same material. Behind the certificate sits the record: the plant that ran it, the raw batch behind it, the hydrolysis and drying record, and the sample kept from it. An accurate certificate can still belong to a different drum from the one that arrives, so the lot number on the COA, the drum and the retained sample should match. For the ranges themselves, see the fish collagen peptides product page. The source decision is on the grade comparison page, the regulatory file is on the compliance page, and the COA glossary entry explains what the document is. ### 02 Fish skin or fish scale collagen: choosing a source URL: https://nutrition.rainwoodbio.com/products/protein-collagen/fish-collagen-peptides/grades/ Reviewed: 2026-11-19 Fish skin and fish scale are both fish collagen, both carry a fish allergen declaration, and both can be hydrolysed to a powder that passes the same protein and molecular weight limits. What separates them is what has to be done to the raw material before hydrolysis, how much mineral load survives into the drum, and how the tissue can be described on the label. The source is chosen by the label and the matrix before it is chosen by the specification. In one lineSkin and scale are the same species declaration and different raw materials: the scale has to be demineralised, and that step shows up in the ash, the colour and the specification. ## One ingredient name, two tissues Fish skin is a by-product of the filleting line: a wet, fatty tissue that has to be chilled quickly and processed before the lipid and the enzymes change it. Fish scale is a by-product of scaling and skinning, and it is a composite material: collagen fibres laid over a mineral phase, mostly calcium phosphate. The collagen in both is predominantly type I, which is why one specification can cover both, and why the process cannot be the same. Scale has to be demineralised before hydrolysis, usually with an acid wash followed by rinses. Skin does not, but it usually needs a defatting step. Those two pre-treatments are the real difference between the grades: they decide the ash, the colour, part of the odour, and the amount of washing the specification has to describe. The hydrolysis itself can be run to the same peptide target on either raw material. The CAS number does not help here. 9007-34-5 is assigned to collagen as a class and says nothing about species or tissue, so a certificate carrying only the CAS number could describe fish skin, fish scale or a bovine hide. The source has to be written out in words on the specification. ## The two sources side by side Fish skin and fish scale collagen peptides · what differs | Attribute | Fish skin | Fish scale | Raw material | Filleting offcuts, wet and fatty | Scales, mineralised composite | Pre-treatment | Wash and defat | Demineralisation, then wash | Protein | ≥90.0%, Kjeldahl N × 5.55 | ≥90.0%, same factor and basis | Hydroxyproline | 8.0–12.0% by HPLC | 8.0–12.0% by HPLC | Ash | ≤2.0%, usually with margin | ≤2.0%, closer to the limit | Colour and odour | White to off-white; marine note | Can run slightly grey or tan; mineral note | Allergen | Fish declared | Fish declared | Label wording | “Fish skin collagen peptides” | “Fish scale collagen peptides” The table describes the materials, not a ranking. Either source can meet the catalogue specification, and the certificate for either one has to repeat the same definitions of protein, hydroxyproline and peptide size. ## Inside the drum Ash is the first visible difference. A scale-derived powder carries the residue of its mineral phase, and even a well-demineralised lot tends to sit closer to the 2.0% limit than a skin-derived lot does. Ash is not only inert material: it contains calcium and phosphate that can buffer the powder, so the pH of the 5% solution is one of the first numbers to drift when demineralisation is incomplete. Colour follows the raw material and the drying step. Skin-derived powder is typically white to off-white; scale-derived powder can carry a light grey or tan tint that survives spray drying. Odour differs in character rather than intensity: skin material can carry a marine or broth note from residual lipid, while scale material can smell more mineral. Both are acceptable in a capsule and both have to be assessed in the actual matrix. Flow and dust are set by the particle size and the dryer, not by the tissue. The standard material is ≥95% through 40 mesh, which flows well and disperses quickly but produces dust when poured. Agglomerated and low-dust granulated formats are available on request, and they change the packing behaviour rather than the chemistry. ## In the finished product In a capsule, bulk density and the capsule count per dose set the limit. Both sources can be filled, and the difference is in the powder's flow rather than its assay. In a stick pack or a drink mix, dissolution speed and the marine note matter more: a finer peptide fraction wets out faster, and a skin-derived lot with residual lipid can show its odour once the pack is opened. In a clear beverage, haze is the deciding test. It depends on the peptide distribution, the pH of the drink and the minerals carried over from the raw material, so a scale-derived lot near the ash limit deserves a bench trial at the target pH before the formula is fixed. In a gummy or a chew, the hygroscopic powder competes with the matrix for water, and the source matters less than the particle size and the moisture of the base. None of these questions is answered by the protein percentage. They are answered by a trial with the material that will actually ship, at the concentration the label will use. ## Writing the specification - “Hydrolysed fish collagen peptides; species and tissue printed on the certificate.” - “Protein not below 90.0% on a dry basis, by Kjeldahl with the 5.55 factor; factor and basis printed on the COA.” - “Hydroxyproline 8.0–12.0% by HPLC.” - “SEC distribution reported in full, with at least 90% of the mass under 3,000 Da.” - “Loss on drying ≤7.0%; ash ≤2.0%; pH (5% solution) 5.0–7.0.” - “Particle size ≥95% through 40 mesh; agglomerated or low-dust granulated on request.” - “Fish allergen statement; country of origin; species declaration.” A specification written this way gives the laboratory something to test against and the label writer something to quote. One that names only the protein range does neither. ## When the source does not decide the answer If the finished label says “fish collagen peptides” and the matrix masks a faint marine note, either source can be used, and the choice comes down to availability, ash margin and the documentation behind the lot. If the label names the tissue, the specification has to name it too, and a change of source becomes a label change. If the formula is a clear drink or a product where ash and pH are tight, skin is the easier starting point because the demineralisation step is absent. The narrow comparison, including the label wording and the ash question, is on fish skin versus fish scale collagen. The numbers behind both are on the COA page, and the regulatory position of the fish source is on the compliance page. The product page carries the full range. ### 03 Fish collagen peptides are stable dry; moisture and the matrix decide the rest URL: https://nutrition.rainwoodbio.com/products/protein-collagen/fish-collagen-peptides/stability/ Reviewed: 2026-11-19 A sealed drum of fish collagen peptides does not lose protein on the shelf. What changes is the water it takes up, the marine note it develops, the tint that appears in a warm store and the lumps that form after the pack has been opened. In a finished product the same powder meets heat, pH and a sugar matrix, and there the appearance and the aroma move before the assay does. In one lineFish collagen peptides are chemically stable dry; moisture, aroma and the matrix are what limit the shelf life. ## The powder in the drum Spray-dried collagen peptides are hygroscopic. The powder pulls water out of the air, and the water does two things at once: it softens the particle surface so that particles bridge into lumps under their own weight, and it lifts the water activity to the point where colour and aroma reactions run. A drum opened in a humid filling room and closed again can cake within days while the protein and hydroxyproline figures stay exactly where they were at release. The ≤7.0% loss on drying on the certificate describes the drum when it was released, not the drum after a season in storage. What governs shelf life is the water activity inside the pack as it changes, which depends on the barrier, the headspace and the humidity of the store. Particle size interacts with moisture: a 40 mesh powder has a large surface area per gram, and the fines clump first. Granulated formats resist caking longer but are not a substitute for a moisture barrier. ## Once it is in solution In a drink, a gel or a gummy, water, heat and pH act on the peptide for as long as the product sits on the shelf. Peptide bonds hold up well in a food matrix at room temperature, so the protein figure is not usually the first thing to move. The changes that show up are haze, colour and aroma: solutions can turn from clear to slightly hazy as longer chains aggregate, and can take on a cooked or marine note. Heat is the main accelerator. A single pasteurisation or hot fill can change a drink more than months at ambient temperature, and the effect compounds with storage. The pH of the matrix matters too: the certificate's 5.0–7.0 refers to a 5% solution of the powder, not to the finished drink, and a low-pH beverage can haze where a neutral one stays clear with the same lot. Reducing sugars are the other variable. A fish peptide in a sweet matrix will brown, first as a cream or tan tint and later as a taste change. The reaction is slow in a dry powder and much faster in a drink or a gummy with free water. Microbiological stability in a reconstituted product is a separate question again: the powder's APC and absence results do not carry over to a water-based food, which needs its own preservation or thermal process. ## The four factors that matter Stability factors · what each one changes | Factor | Main effect | What to control | Water activity at packing | Caking, colour, aroma | Dryer outlet, cooling before packing | Pack barrier | Moisture and oxygen ingress | Foil laminate, intact liner, sealed closure | Storage temperature | Colour and aroma, fastest in solution | Cool, dry store away from heat sources | Reducing sugars | Browning in the matrix | Formula and water activity of the product | Trace metals | Colour development in a moist powder | Ash and heavy-metal limits The table is ordered by how often each factor decides the outcome. Temperature and moisture together explain most of the variation between two drums from the same lot. ## Running the study Stability work on this material is run in the pack that will ship, not in a laboratory jar. Each pull is checked for moisture, water activity, appearance, smell and how it dissolves; protein and hydroxyproline are run only at the first and last pull, to show the material has not changed identity. Stability protocol · what each condition answers | Condition | Duration | What it tests | 25 °C / 60% RH | Long term | Shelf life at the stated storage condition | 30 °C / 65% RH | Intermediate | Behaviour in a warm, humid market | 40 °C / 75% RH | Accelerated | Moisture uptake, caking, colour, odour | Open-pack challenge | Short term | In-use behaviour after the pouch is opened | Matrix trial at target pH | Product shelf life | Haze, colour and aroma in the finished product An accelerated condition is a screening tool, not a shelf-life claim. A lot that browns at 40 °C has told you which failure mode to watch; it has not told you how many months the product lasts at 25 °C. ## The pack and the formula A pouch and a drum behave differently in a stability study. The pouch suits bench and pilot work, but its headspace is large relative to the powder, so air turns over quickly once it is opened. In the drum, the liner does the barrier work; fold it back and the pack is open no matter how tight the lid is. In a finished blend, the collagen peptide is usually the most hygroscopic component. A foil-laminate stick pack keeps it protected; a clear screw-cap jar does not, above all in a warm kitchen. In a gummy, the peptide competes with the base for water and can make the chew sticky during processing if the particle size is very fine. In a clear drink, the thermal process and the pH are the variables to fix before the peptide is chosen. Packaging decides odour as well as moisture. Fish collagen takes up aroma from the air, and a drum that sat beside a flavour concentrate can arrive carrying it. Store it apart and keep the liner closed between uses. ## Setting the shelf life The number comes from data on the pack and the market in question; no default travels with the ingredient. It records the last point at which moisture, appearance, smell and solubility are still inside the limits with room to spare. Where the data end, the claim ends. The specification needs a storage condition beside the shelf life: a cool, dry place, away from strong odours, with the liner closed after opening. The shipment should carry an agreed remaining shelf life, because a lot that is chemically inside specification can still be too old for a product with a long retail life. The retained sample and the batch file are covered on the quality page. The parameters tracked over time are listed on the COA page; the pack formats and the order quantities are on the MOQ page; and the source decision that changes the matrix behaviour is on the grade comparison page. ### 04 Fish collagen peptides: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/protein-collagen/fish-collagen-peptides/moq/ Reviewed: 2026-11-19 The minimum order for fish collagen peptides is 1 kg, packed in a foil pouch and drawn from a production lot rather than made as a special batch. The 25 kg fiber drum is the pack a commercial run uses, and the quoted lead time for the standard 40 mesh powder is 1–7 days. What actually settles an order is the specification, the document pack and the pack format, not the minimum. In one lineOne kilogram is a trial drawn from a production lot; the 25 kg drum and the document pack are what turn the trial into an order. ## Why one kilogram One kilogram is enough material to run a bench trial, a small sensory panel, the first stability pull and an independent analytical check on the same lot. That combination is what a formulator needs before committing to a production quantity, and it is why the minimum is set at a weight that supports all four rather than at a weight that merely fills a sample bag. The trial pack is the same material as the production pack, taken from a released lot. It is not a laboratory sample with a different drying history, and that matters: a lab sample can pass a dispersibility test that the production powder would fail. Ask for the lot number on the pouch and the COA that belongs to it. The 1 kg pack is not a route to a commercial run in itself. Filling a thousand sachets from a pouch is not a production process, and a buyer who needs 25 kg should order the drum, because repacking a powder outside a controlled environment adds moisture and dust exposure for no gain. ## Packs and formats Pack formats · fish collagen peptides | Pack | Net weight | Use | Watch | Foil pouch | 1 kg | Bench, pilot, sample retention | Headspace; reseal after opening | Fiber drum with liner | 25 kg | Production | Liner integrity; lid torque | Agglomerated powder | Agreed per order | Dust-sensitive filling lines | Dispersion time; bulk density | Low-dust granulated | Agreed per order | Sachets, tablets, blends | Granulation aids; flow The standard material is spray-dried and ≥95% through 40 mesh. Agglomerated and low-dust granulated formats are made to order, so their lead time and pack weight are agreed in the quotation rather than taken from the standard list. The granulation aids, if any, belong on the specification and on the label of the finished product. ## Lead time and dispatch The quoted lead time for the standard powder is 1–7 days. That window covers picking, document preparation and dispatch from current stock; it does not include transit, customs clearance or the buyer's own release testing. A made-to-order granulation is scheduled against the production run, so its date is confirmed in the quotation and should not be assumed from the standard window. Two things move the date more often than production does: an incomplete specification, which leaves the material unallocated while the details are agreed, and an incomplete document pack, which can hold a shipment at the border. Sending the destination market and the required documents with the enquiry is faster than adding them after the order is placed. ## What a quotation has to answer A quotation that gives a weight and a date is not yet a quotation for this material. Six items decide whether the number is comparable with another supplier's, and each one changes the answer. Six items a complete quotation answers | Item | Why it changes the answer | Species, tissue and specification | Skin and scale are separate materials; the methods define the grade | Quantity and pack format | Pouch, drum or made-to-order granulation | Destination and delivery term | Transit, customs and the document set follow the market | Document pack | COA, specification, SDS, allergen, origin and species statement | Allergen and label position | Fish declaration and any species or tissue wording on the pack | Required date and remaining shelf life | Stock allocation and the age of the lot that ships A quotation that matches on quantity and differs on the rest is describing a different material or a different service. ## Trial packs and samples The 1 kg pouch works as a paid sample or as the first line of a trial order; either way it ships with its own COA and can be retained for comparison against the production drum. A smaller laboratory sample can be arranged for a feasibility check, but it should not be used to set a specification, because a small lot drawn and packed by hand does not represent the moisture and particle size of a drum. Keep the sample pouch sealed and labelled with the lot number. When the production drum arrives, the retained sample is the reference that settles a dispute about colour, odour or flow, and it is worth more than a photograph. The tests that a sample can support are set out on the identity page. ## What the terms cover The agreed specification is the annex to the order, and the allergen statement and the origin declaration are part of it rather than attachments added later. The delivery term, the remaining shelf life at shipment and the window for raising a quality claim should be written into the order confirmation, because each of them is a term the buyer can check on arrival. Payment terms and Incoterms are commercial and are agreed per order; they do not change the specification. What does change with the market is the document pack, and a buyer who needs a specific declaration should ask for it before the order is confirmed rather than after the drum has shipped. The quantities and limits are on the product page; the certificate that travels with each lot is described on the COA page; and the MOQ glossary entry explains what a minimum covers. ### 05 Where fish collagen peptides are permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/protein-collagen/fish-collagen-peptides/compliance/ Reviewed: 2026-11-19 Fish collagen peptides are sold as a food ingredient and as a dietary supplement ingredient in the European Union, the United States and the United Kingdom, and none of them regards the peptide as an additive that needs approval. The questions that decide a launch sit elsewhere: the fish allergen declaration, the species and origin in the file, the contaminant limits for the product as sold, and the wording on the label. In one lineFish collagen is a permitted food ingredient in all three markets; the fish allergen, the species file and the contaminant limits do the work. ## Four things to check The first check is the ingredient status: whether hydrolysed fish collagen can be sold as food in the destination market. The second is the source file: fish brings an allergen declaration and a species and origin statement, and it does not bring the TSE/BSE dossier that a bovine material requires. The third is the contaminant panel against the limit for the product as sold. The fourth is the label and any claim attached to it. The four checks have different owners: the supplier and the importer own the ingredient status, the recipe and the label own the allergen declaration, the food category sets the contaminant limit, and the brand owns the claim. ## European Union Collagen has been eaten in the Union for long enough that it is not, on this review, a novel food. That reading applies to the material in general, not to every source: a different species, tissue or process should be checked against the current novel food catalogue before launch. Fish sits in Annex II of Regulation (EU) No 1169/2011, so a fish peptide triggers a labelling duty that a bovine peptide does not; the allergen must be emphasised in the ingredient list. The species belongs in the supplier file, and a species name on the pack needs the traceability record behind it. Maximum levels for contaminants come from Regulation (EU) 2023/915. A supplement is judged as sold; an ingredient is judged against the category it goes into, so the specification has to say which of the two it was tested against. ## United States In supplements it is a dietary ingredient; in conventional food it is an ingredient. The supplier should name the basis under which it is offered for that use, and that statement belongs in the buyer's file. Fish is a major food allergen under the Food Allergen Labeling and Consumer Protection Act, so the label has to declare it in the ingredient statement or in a “contains” statement. The protein figure is declared in the Nutrition Facts or Supplement Facts panel, and the source is named in the ingredient list. The federal government sets no lead ceiling for supplements, so the purchase specification and any state rule decide. California's Proposition 65 can apply on top, and because its thresholds move with dose, a compliant lot can still need a warning at a high daily intake. ## United Kingdom The UK works from its own retained food law, so the limits and allergen rules in force at the time have to be checked before a lot is cleared for sale there. Fish stays on the 14-allergen list, and a prepacked-for-direct-sale item must print the allergen information on the pack. The importer should confirm what the authority accepts for the species and origin statement. ## Contaminant limits by market Contaminant limits · fish collagen peptides sold as a food supplement | Element | EU | US | UK | Lead | 3.0 mg/kg | No federal limit for supplements; state rules apply | Check the current UK limit | Cadmium | 1.0 mg/kg | No federal limit for supplements | Check the current UK limit | Mercury | 0.10 mg/kg | No federal limit for supplements | Check the current UK limit | Arsenic | Not harmonised; member state rules may apply | No federal limit for supplements | Check the current UK limit The EU column is the supplement level set by Regulation (EU) 2023/915, which applies to the product as sold. The catalogue specification repeats the lead, cadmium and mercury figures and fixes arsenic at 2 mg/kg: Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg. That is a specification, not a batch result; the COA confirms what the lot measured. Microbiological criteria for this ingredient are not harmonised in the same way, so the specification sets the APC, yeast and mould, E. coli and Salmonella limits. ## Claim boundaries No market here allows a food or a supplement to carry a disease claim. Protein content claims are a separate regime: “source of protein” and “high protein” are tied to the share of energy the protein supplies, and the conditions apply to the food as sold rather than to the powder. Regulation (EC) No 1924/2006 authorises health claims in the Union; as of this review, no claim for collagen peptides is on the list, so the label should stay with the ingredient description and any nutrient content claim the product qualifies for. In the United States, a structure/function statement is written and owned by the brand, and it has to be truthful and supported by evidence. The fish declaration is not a claim but a mandatory statement, and it belongs on the label whatever the marketing position. This site makes no health claim of any kind; the pack copy is the brand's decision, in the market where it sells. ## Documents in the file - Batch COA covering the release parameters and the contaminant results. - Technical data sheet and specification, with species, tissue and peptide distribution. - SDS in the 16-section format. - Fish allergen declaration, with species and tissue named. - Origin and species traceability statement. - US basis-of-sale statement where the material is sold as a dietary ingredient. - Non-GMO, residual solvent, halal or kosher declarations where required. The fish source does not require a TSE/BSE declaration, because fish are not a TSE-relevant species. That is one administrative difference from a bovine collagen file, and it is worth stating so that no reviewer looks for a document that does not exist. ## Before the first order - Does the specification name the species, the tissue and the fish allergen statement? - Is the protein figure accompanied by its nitrogen factor and its basis? - Are the contaminant results measured against the limit that applies where the product is sold? - Is the species and origin record complete enough to support the label wording? - Does the document pack travel with the lot, and does the lot number match the drum? The specification behind this page is on the product page. The source comparison is on grade comparison, the identity tests on the identity page, and the market summaries on the EU and US regulatory pages. How the file is assembled is described on the quality page. ### 06 How we prove a fish collagen lot is fish collagen URL: https://nutrition.rainwoodbio.com/products/protein-collagen/fish-collagen-peptides/identity/ Reviewed: 2026-11-19 A fish collagen lot has to clear two separate identity questions: is the powder collagen, and is that collagen from fish. Hydroxyproline and the amino acid profile answer the first; only a species test or a documented species chain answers the second. The molecular weight distribution answers a third: whether the collagen has actually been cut into peptides or is still gelatin waiting to set. In one lineHydroxyproline proves collagen and only a species test proves fish, so a fish collagen file needs both. ## The four layers of identity Identity is not one test. A certificate that answers one layer and implies the others is where most identity failures begin. Identity layers · the question, the evidence and the blind spot | Layer | Question | Evidence | What it cannot show | Composition | Is the material collagen? | Hydroxyproline; amino acid profile rich in glycine, proline and hydroxyproline | Which species or tissue | Size | Is it hydrolysed? | SEC distribution; fraction below 3,000 Da | Species; whether the collagen is intact | Species | Is it fish? | Species-specific PCR on raw tissue, or a validated method on the powder; documented species chain | Which tissue; whether the tissue tested is the material in the drum | Chain | Which fish, which plant? | Landing or harvest record, process record, lot traceability | Analytical proof on its own The layers are cumulative. A lot with the right hydroxyproline and the wrong species passes the first test and fails the product; a lot with the right species and a gelatin curve passes the species test and fails the process. ## Hydroxyproline against the protein figure Hydroxyproline is the amino acid that makes collagen recognisable. It is formed by hydroxylation of proline after the protein chain is built, and it is present at only trace levels in most non-collagen proteins. A specification of 8.0–12.0% hydroxyproline by HPLC, read against a protein figure of ≥90.0%, describes a material whose hydroxyproline is roughly 8.9–13.3% of the protein mass. That ratio is the first identity check, and it costs nothing extra because both numbers are already on the certificate. The ratio catches two failures. The first is a powder that meets the protein figure with a protein that is not collagen: soy, whey, pea or a hydrolysed cereal will lift the nitrogen without lifting the hydroxyproline. The second is nitrogen spiking: urea, ammonium salts or another nitrogen source can push Kjeldahl upward while the hydroxyproline stays where the collagen put it. Neither failure is visible from the protein line alone. The ratio does not identify the species. Bovine, porcine and fish collagen all contain hydroxyproline, and their windows overlap; fish material often sits toward the lower half of the window, but a fish lot at 12% is not thereby mislabelled. That is why the species layer exists and why the hydroxyproline number cannot replace it. HPLC and colorimetric methods do not return identical hydroxyproline values, so the method belongs beside the number. ## The SEC peptide profile Size-exclusion chromatography separates the peptides by hydrodynamic volume and reports a distribution, not a single number. The specification requires ≥90% of the mass below 3,000 Da, and a useful certificate reports the measured fractions: below 500 Da, 500–1,000 Da, 1,000–3,000 Da and above 3,000 Da. The average molecular weight is a derived figure and hides the shape of the curve; two powders with the same average can behave differently in a drink. The distribution is also the fastest check on gelatin. Gelatin is collagen that has been cooked but not hydrolysed to peptides, and it carries a large fraction above 3,000 Da. A powder blended with gelatin to lift the protein figure will show a high-molecular-weight shoulder that a properly hydrolysed lot does not have, and it will also gel a solution on cooling. Over-hydrolysis shows the opposite pattern: a large fraction below 500 Da, more free amino acids, and a taste that turns bitter or broth-like. SEC is a relative method: the result depends on the column, the calibration standards and the detection wavelength. The certificate should name the method, and a cut-off quoted without it is not comparable between suppliers. ## What diffraction and infrared do not add X-ray diffraction and infrared spectroscopy are the standard identity tools for a crystalline ingredient, where they separate polymorphs and hydrates. A spray-dried collagen peptide is amorphous, so diffraction returns a broad halo and adds nothing to the species question. Infrared shows the amide bands of a protein, which is consistent with collagen but not specific to fish. Neither method belongs in a fish collagen file as proof of source; they belong to the mineral salts and the crystalline amino acids. ## The adulteration routes, and the test that finds each Collagen carries a defined amino acid signature, and a powder mixed into it usually leaves a trace. The routes below are the ones a specification and a testing plan should anticipate, because each leaves a different fingerprint. Adulteration routes · what changes and what detects it | Route | What it changes | Test that finds it | Bovine or porcine collagen | Species, not the collagen chemistry | Species-specific PCR; declared species chain | Gelatin | Molecular weight curve; gelling behaviour | SEC distribution above 3,000 Da; gel test | Other protein | Protein figure up, hydroxyproline down | Hydroxyproline-to-protein ratio; amino acid profile | Nitrogen spiking | Kjeldahl up with no peptide mass | Ratio; total nitrogen against amino acid nitrogen | Cheaper fish species | Species claim, not identity as collagen | Species-specific PCR; traceability record No single test covers the table. The combination of hydroxyproline, the amino acid profile, SEC and a species method is what makes a lot defensible, and the panel is small against the risk it covers. ## Writing the specification - “Fish collagen hydrolysate; species, tissue and country of origin named.” - “Protein ≥90.0% dry basis, Kjeldahl with N × 5.55.” - “Hydroxyproline 8.0–12.0% by HPLC.” - “Molecular weight: ≥90% below 3,000 Da by SEC; fractions reported.” - “Species identity supported by a species declaration and, on request, a PCR result.” - “Allergen: fish declared; CAS 9007-34-5 is an identifier, not a species statement.” The CAS line matters. 9007-34-5 is the generic collagen number, identical for fish skin, fish scale and bovine hide; a specification that leans on it has said nothing about the species. ## Five questions for a supplier - Which species and which tissue is this lot made from, and is the species on the COA? - Which nitrogen factor and which basis were used for the protein figure, and by which method was hydroxyproline measured? - Can you send the full SEC distribution with the method and the fraction bins, not only the cut-off? - What evidence supports the species claim: a PCR result, a raw-material species declaration, or both? - What is the fish allergen statement, and does the lot number on the drum match the COA and the retained sample? The answers belong in the file next to the certificate. The COA page explains how the numbers are read, the grade comparison explains what changes with the tissue, and the compliance page sets out the allergen and market requirements. The HPLC method note describes the chromatographic side of the work. ### 02.1 Fish skin vs fish scale collagen: source, profile and the label URL: https://nutrition.rainwoodbio.com/products/protein-collagen/fish-collagen-peptides/grades/fish-skin-vs-scales/ Reviewed: 2026-11-19 Both raw materials give a peptide powder that can meet the same catalogue limits, and both trigger the same fish allergen declaration. The difference starts upstream: skin arrives wet and fatty from the filleting line, while scale arrives mineralised and has to be demineralised before hydrolysis. That difference reaches the drum as ash, colour, odour and as the amount of process the specification has to describe. In one lineThe allergen is identical; the difference is the demineralisation step, and it shows up in the ash, the colour and the specification. ## Where the two raw materials come from Fish skin is a filleting by-product. It is available in large volumes wherever fish is processed for fillets, it is wet, and it carries a layer of subcutaneous fat. It has to be chilled or frozen quickly and processed before the lipid oxidises, because oxidised lipid is what turns into a marine or rancid note in the finished powder. Much of the fish collagen sold as peptides is made from skin, and skin is the source behind the standard specification on this site. Fish scale is a scaling and skinning by-product. It is drier and more stable than skin, but it is a composite: collagen fibres over a mineral phase, largely calcium phosphate. The mineral has to be removed before hydrolysis, usually with an acid wash and a series of rinses, and the completeness of that step is what separates a compliant scale lot from one that fails on ash. Scale collection is more distributed than skin collection, so the species mix in a scale lot can be wider. Both tissues are predominantly type I collagen, which is why one set of release limits can cover both. The species still differs, and so does the season, the chilling regime and the time between catch and processing. ## Protein, hydroxyproline and the peptide curve The catalogue limits are the same for both sources: protein ≥90.0% by Kjeldahl with N × 5.55, hydroxyproline 8.0–12.0% by HPLC, and ≥90% of the mass below 3,000 Da by SEC. A scale lot can meet all three. What differs is the work needed to get there and the way the curve is reached: a scale material usually needs a longer demineralisation and washing sequence before the hydrolysis, and those steps remove some of the soluble material that would otherwise contribute to yield. Hydroxyproline follows the species mix as much as the tissue. A plant running mixed species will produce a Hyp figure that moves with the mix on either raw material, and a scale lot collected from several processors is more likely to carry that variation. The certificate should report the species, not only the tissue. The peptide curve is set by the hydrolysis and the filtration, not by the raw material. Either source can be run to a fine curve or a coarser one, and the specification should state the target distribution rather than the average. A buyer who compares two certificates on the cut-off alone will not see the difference between a clean curve and one with a high-molecular-weight shoulder. ## Ash, pH and the demineralisation record Ash is where the two sources separate most clearly. The limit is ≤2.0% for both, but a skin-derived powder usually sits well inside it, while a scale-derived powder sits closer to the line because the raw material started with a mineral phase. Ash is not just inert residue: it carries calcium and phosphate, and those ions buffer the powder. A scale lot with incomplete demineralisation can show a pH at the edge of the 5.0–7.0 window even when the hydrolysis was correct. What the source changes in the drum | Parameter | Fish skin | Fish scale | Ash, typical position | Well inside ≤2.0% | Closer to ≤2.0% | pH (5% solution) | Usually mid-window | Can drift with residual mineral | Colour | White to off-white | Light grey or tan possible | Odour | Marine note from residual lipid | More mineral, less lipid The demineralisation record is the document that explains the ash. Ask for the acid wash and rinse sequence, the water quality and the ash result on the demineralised intermediate, not only on the final powder. A final ash result inside the limit can still come from a process that is not under control. ## The allergen position does not change Fish is the allergen, and the tissue is not. A skin-derived peptide and a scale-derived peptide both carry a fish declaration under Regulation (EU) No 1169/2011, both fall under the fish allergen in the United States, and both are covered by the 14-allergen list in the United Kingdom. Choosing scale does not remove the declaration, and choosing skin does not soften it. What the species does change is the wording that can sit beside the declaration. If the pack names a species, the traceability record has to support it, and a mixed-species scale lot makes that harder than a single-species skin lot. The allergen statement itself stays the same: fish, declared in the ingredient list. ## What the label can say “Fish collagen peptides” is the ingredient description, and it is accurate for either source. “Fish skin collagen” or “fish scale collagen” can be used only when the tissue is actually that tissue and the specification says so. “Marine collagen” is a marketing term rather than a regulatory category; it does not distinguish fish from other marine material, and it should not be used in place of the species or the tissue where the label is making a source claim. “Type I collagen” is a characterisation claim. Both tissues are predominantly type I, but the certificate does not report collagen type, so a pack that prints it needs a characterisation report behind it. The same rule applies to a species name: it is a claim that the file has to carry, not a word the copywriter can choose. ## When to choose which Choose skin when the powder has to be neutral in colour and odour, when the ash margin matters for a clear drink, and when a single-species chain is easier to document. Choose scale when the supply has to come from a drier, more stable raw material, when the demineralisation capability is demonstrably in place, and when the specification can hold the ash and pH at the tighter end. Choose either one when the label says only “fish collagen peptides” and the matrix masks the sensory difference. In every case the decision is recorded in the specification, not in a conversation. The wider comparison is on the grade comparison page; the release limits are on the COA page; the allergen file is on the compliance page; and the full range is on the product page. ### 01 What the COA for undenatured type II collagen actually contains URL: https://nutrition.rainwoodbio.com/products/protein-collagen/undenatured-type-ii-collagen/coa/ Reviewed: 2026-11-19 A certificate for undenatured type II collagen answers two questions: is the powder type II collagen from chicken sternum, and how much of it is still native? The catalogue sets the ranges and methods; the batch COA confirms the lot. A protein figure without the ELISA has not measured the parameter the grade is sold on. In one lineA type II collagen certificate proves the native content by ELISA with a type II specific antibody, beside the protein factor, the moisture, the ash and the contaminant panel. ## The parameter list CAS 9007-34-5 is the generic collagen CAS number, shared with collagen peptides and other collagen forms. It names the family, not the form, so it cannot separate a native powder from a hydrolysed one. The certificate is built on the parameters that can: native type II by ELISA, protein with its factor, moisture, ash, particle size and the contaminant panel. The table is the catalogue list; the release limits are agreed in the specification and repeated on every lot. COA parameter list · chicken sternum undenatured type II collagen | Parameter | Method | Release limit | Type II collagen | ELISA, type II specific antibody | 10.0–20.0% | Protein | Kjeldahl, N × 6.25 | ≥50.0% | Appearance | Visual | Off-white to light tan powder | Loss on drying | Oven or infrared | ≤8.0% | Ash | Gravimetric, furnace | ≤10.0% | pH (5% suspension) | Potentiometry | 5.0–7.0 | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and enrichment | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent | Particle size | Sieving | ≥95% through 80 mesh The source is a parameter without a number. Chicken sternum is a different label ingredient from bovine hide, fish skin or porcine tissue. The identity page covers how species and tissue are supported. ## What the ELISA measures, and what the protein figure measures The ELISA is an antibody assay. The antibody binds type II collagen and the signal is read against a native standard. It measures native content only if the epitope depends on the triple helix; a type II antibody raised against a linear sequence can bind denatured collagen as well. Where the method is conformational, heat-denature the powder and the protein remains but the result falls. That is why the antibody belongs in the specification. Three details decide comparability. The extraction step must be stated, because native collagen is not freely soluble in neutral buffer and the extraction decides how much reaches the plate. The antibody must be named, because a type II reagent and a general collagen reagent answer different questions. The standard must be described, because a different calibrant carries a different bias. Ask for those lines on the method sheet, not only on the certificate. Protein is a different measurement. Kjeldahl measures nitrogen and multiplies it by a factor; this specification uses N × 6.25, the general food factor. Collagen is often calculated with N × 5.55, which gives a figure about 11% lower on the same nitrogen. Neither factor measures type II collagen. At 10–20% native content, most of the 50% protein is other sternum protein, and the gap is expected. A certificate reporting protein alone has described the powder, not the grade. ## Limit, result and the word conforms A release limit is the window a lot must fall inside; a lot result is what the laboratory measured. A useful certificate shows both, with the method and basis beside each line. "Conforms to specification" without figures is a conclusion with no evidence, and it cannot be compared with another supplier's certificate. The basis matters for moisture and protein. Loss on drying describes the powder at release; a dry-basis and an as-is figure differ by the moisture content, which can be several percent inside an 8.0% limit. The certificate should state the basis and the purchase specification should use the same one. A label claim calculated on the wrong basis can be out by more than the analytical variation. This page describes a catalogue specification: what the material is expected to meet. The batch COA confirms the lot that ships. This site does not publish a batch result, a batch number or a customer’s certificate, and no page here should be read as one. ## What moves between lots Native content moves most, because the raw material is a biological tissue and extraction trades yield against structure. A gentler extraction keeps more helix and returns less material; a harsher one raises yield and lowers the ELISA. Standardization then blends lots to target, which is why the certificate is narrow even when the extract varied. The 10% and 20% grades are targets inside the same 10.0–20.0% range. Moisture follows drying and the pack. Ash follows the mineral content of the tissue; a sternum powder carries more mineral than a hide powder, which is why the limit is 10.0% rather than 2.0%. Colour moves from off-white to light tan with drying temperature and time. Particle size moves with the mill and sieve, and a lot only just through 80 mesh flows differently from one well below it. The ELISA also carries sampling error. A 25 kg drum is not necessarily uniform, and a sample from the top can differ from one drawn after rolling. Ask how the sample was drawn and whether the result is a mean of increments. ## When to send a sample to an outside laboratory Order an independent test when the source is new, when the first commercial shipment enters a regulated market, when the label says "native", or when a result is disputed. The useful panel answers the open question: native ELISA at a second laboratory with method and antibody named, protein with its factor, moisture and ash, ICP-MS for contaminants, and the microbiological set on the same sample. An outside laboratory also settles a difference between two certificates. Send the retained sample, both certificates and the agreed specification, and ask for the tests that separate the explanations. If native content is the dispute, ask for spike-and-recovery on the same plate, because an extraction that under-recovers will read low on every sample. The quality page covers the batch file and the ICP-MS note the contaminant panel. ## What to compare between suppliers Put six lines side by side: the ELISA method, antibody and standard; the grade target and release window; the protein factor and basis; the moisture and ash limits; the source, tissue, origin and process temperature; and the contaminant and microbiological panel with methods. Two quotations that agree on "10%" but disagree on the other five are not quoting the same material. The second layer is the record: which site made the lot, which raw material batch went in, which extraction and drying conditions applied, and what retained sample exists. A certificate can be accurate and still describe a lot other than the one that arrives. The lot number on the COA, the drum and the retained sample should match. For the ranges, see the product page. The grade decision is on the grade page, the native evidence on the identity page, and the certificate definition in the COA glossary. ### 02 10% or 20% undenatured type II collagen: choosing a grade URL: https://nutrition.rainwoodbio.com/products/protein-collagen/undenatured-type-ii-collagen/grades/ Reviewed: 2026-11-19 Two grades are offered: a 10% powder and a 20% powder, both standardized by ELISA inside the same 10.0–20.0% catalogue range. The grade decides how much powder carries a given amount of native type II collagen, and therefore the capsule size, the stick weight and the label arithmetic. It does not change the source, the assay or the protein floor. In one lineThe grade is the ELISA target, not the protein percentage: 10% and 20% are two standardization points inside one catalogue range, and the choice follows the fill weight the label has to hit. ## Standardization is the product Chicken sternum does not arrive at a constant native collagen content. The tissue varies with the bird, the cut and the season, and the extraction decides how much of the triple helix survives. Standardization turns that variable extract into a powder with a declared native content, and the declared value is the grade. A 10% grade targets 10 g of native type II collagen per 100 g of powder; a 20% grade targets 20 g. Both sit inside the catalogue range, and the release window for each grade is agreed in the specification. The protein figure does not track the grade. Both grades carry a protein floor of 50.0% by Kjeldahl N × 6.25, because the powder is mostly protein either way. A 20% grade is not twice as protein-rich as a 10% grade; it carries twice the native type II collagen per gram at the target, with less of the other sternum material alongside it. That distinction matters when a quotation compares the two on the protein line and calls the higher figure the better grade. Standardization also explains the 10.0–20.0% range on the certificate. The range is the window the catalogue supports, not a licence to ship any point inside it against a fixed label. The grade fixes the target; the certificate reports the lot against that target. ## 10% and 20% side by side Grade comparison · 10% and 20% undenatured type II collagen | Point | 10% grade | 20% grade | Native type II target | 10% by ELISA | 20% by ELISA | Powder per 100 mg native | 1,000 mg | 500 mg | Protein floor | ≥50.0% (N × 6.25) | ≥50.0% (N × 6.25) | Moisture and ash | ≤8.0% / ≤10.0% | ≤8.0% / ≤10.0% | Particle size | ≥95% through 80 mesh | ≥95% through 80 mesh | Catalogue status | Standard grade | On request | Fill consequence | Larger powder weight per serving | Smaller powder weight per serving The two grades share the specification lines that describe the powder, and differ on the line that describes the native content. That is the whole comparison. A quotation that lists only "type II collagen 10–20%" has not told the buyer which grade is being offered, and a purchase order that does not name the target leaves the release window open. ## What stays the same, and what does not Both are off-white to light tan powders, both are milled to 80 mesh, and both disperse in water rather than dissolving. The native collagen does not give a clear solution at either grade. What can differ is the standardization blend behind the target: a 20% grade needs a more concentrated component, and the blend can change bulk density, flow and the way the powder fills a capsule or a stick. Those are measured properties, not assumptions, and they belong in the trial rather than in the specification alone. The ash limit is the same 10.0% on both grades, but the actual ash can differ if the more concentrated component carries a different mineral load. The same applies to colour and odour. A grade change is a supplier and process change even when the catalogue lines look identical, so ask for the certificate of the grade you are buying, not the certificate of the grade family. ## The arithmetic of the fill The serving arithmetic is simple and it drives the format. If the label declares 100 mg of native type II collagen per serving, the 10% grade needs 1,000 mg of powder and the 20% grade needs 500 mg. At 50 mg, the figures are 500 mg and 250 mg. The powder weight, not the grade name, is what the capsule shell or the stick has to hold, and a capsule has a fixed volume. Two rules follow. Set the fill from the minimum native content the lot is released at, not from the target, or the label claim can fall short at the low end of the release window. And decide the overage policy with the supplier before the label is fixed: an overage on the native content is a commercial and regulatory decision, not a production detail. The COA page explains how the release window is read. ## What changes when you switch Switching grade changes five things: the powder weight per serving, the capsule or stick size, the overage, the label figure and the stability load. It does not change the source, the ELISA method or the contaminant limits. If the fill weight stays the same and the grade moves from 10% to 20%, the native content per serving doubles; that is a label change, not a capsule change. If the fill weight is halved to keep the same label, the capsule can be smaller and the excipient load changes with it. Write the grade into the specification as a target with a release window, and name the ELISA method beside it. State the powder weight per serving and the basis on which the label figure was calculated. Ask for change control on the standardization blend, because a new blend can meet the same target and still change the flow, the colour and the fill. For the grade decision in the context of the other form, see undenatured versus hydrolysed collagen. The 10% grade is the standard grade and the 20% grade is made on request; the ordering sequence is on the MOQ page. The full range is on the product page, and the particle-size definition is in the particle-size glossary entry. ### 03 Undenatured type II collagen is heat-sensitive; the process decides the native structure URL: https://nutrition.rainwoodbio.com/products/protein-collagen/undenatured-type-ii-collagen/stability/ Reviewed: 2026-11-19 The native triple helix is held together by hydrogen bonds, and heat plus water break those bonds without breaking the peptide chain. The protein figure barely moves when that happens; the ELISA result falls. The drying step, the granulation step, the matrix and the storage condition therefore decide how much native type II collagen reaches the consumer. In one lineThe native triple helix is lost to heat and moisture before it is lost to time, so the drying and packing steps decide whether the ELISA result survives the shelf life. ## The dry powder A dry powder at or below the 8.0% loss-on-drying limit is the most stable form of this material. Water plasticises the collagen and lowers the temperature at which the helix unfolds, so the same powder that survives a warm dry store can lose native content quickly once it has picked up moisture. The limit on the certificate describes the powder at release, not the powder after a season in a warehouse. The powder is hygroscopic. The 1 kg foil pouch and the liner inside the 25 kg drum are the real moisture barriers, and a liner that has been cut open and folded back is an open pack whatever the lid says. Storage belongs below 25 °C, dry, out of direct light and away from strong odours, because the powder can pick up aroma from its surroundings. Caking is the visible sign of moisture uptake; the ELISA result is the invisible one. ## In a water-based matrix The powder disperses in water but does not dissolve to a clear solution. Once hydrated, the collagen is far more heat-sensitive than it was dry, and the unfolding range moves toward the temperatures used in pasteurisation, hot fill and other heat steps. A ready-to-drink product that is heat-processed will lose native content unless the process is built around the ingredient; a dry stick that is reconstituted cold is a different case. pH and ionic strength change how the hydrated protein aggregates, which shows up as haze and as a change in the mouthfeel before it shows up on the certificate. If the format needs a clear drink, or a serving measured in grams rather than a few hundred milligrams, the native form is the wrong choice. The undenatured versus hydrolysed comparison sets out the alternative. Microbiological stability in a reconstituted drink is a separate question. The powder is specified at APC ≤1,000 cfu/g with E. coli and Salmonella absent, but that specification does not carry into a water-based product. The drink needs its own preservation, heat process or water-activity control, and its own shelf life. ## What actually moves the result Stability factors · what changes the native content | Factor | What it does | Control | Heat | Unfolds the helix; the ELISA result falls | Low-temperature drying; no steam | Moisture | Lowers the unfolding temperature; caking | ≤8.0% LOD; barrier pack; desiccant | Shear and compression | Local heating and particle damage | Low-shear blending; direct compression | Time and storage temperature | Progressive loss of native content | Cool store; real-time stability data | Oxygen and light | Colour change and oxidation | Foil or opaque pack; nitrogen if needed | Matrix pH | Aggregation and haze in a wet product | Trial at the target pH and use level Heat and moisture act together, which is why a dry heat challenge and a humid heat challenge are not interchangeable. A process that runs at a high inlet temperature but a short residence time can do less damage than a lower temperature held for longer, because the powder temperature and the water activity at that moment decide the result. The inlet temperature alone is not a process control for this material. ## The stability protocol The powder is tested in the pack it will ship in. The standard conditions are 25 °C / 60% RH for the long term, 30 °C / 65% RH as an intermediate condition for warm markets, and 40 °C / 75% RH for the accelerated arm. An open-pack humidity challenge answers what happens after the customer opens the pouch, and a matrix trial answers what happens in the finished capsule, stick or drink. Pull samples at the start and at 1, 2, 3, 6 and 12 months, and test the native ELISA at every point. Add protein, loss on drying, water activity, appearance, pH and the microbiological set. The native ELISA is the stability-indicating test; the protein figure is a control that shows the material has not changed identity. Differential scanning calorimetry is a useful support, because it measures the unfolding transition and shows whether the process has already moved it. Accelerated data rank formulations and pack options. They do not assign the shelf life on their own, because protein unfolding is not a simple Arrhenius reaction and a hot, humid arm can over-predict or under-predict the real-time result. The shelf life is confirmed by the long-term arm in the real pack. ## Formulation and packaging choices Dry blending, direct compression and capsule filling are low-heat operations and are the natural formats for this material. Wet granulation, fluid-bed drying at a high temperature, steam and aqueous film coating are the risk steps. If a tablet needs a coating, ask for the process temperature and the residence time, and test the coated tablet rather than the raw powder. A capsule shell is not a moisture barrier; a blister or a high-density polyethylene bottle with a desiccant is. Stick packs need a foil laminate with a low moisture-vapour transmission rate, and single-serve sachets are better than a multi-serving jar for the same reason. Never hold the powder as a slurry before drying or filling. In a blend, this powder is one of the more hygroscopic components, so the order of addition and the headspace in the pack belong in the development work. ## How shelf life is assigned Shelf life is assigned from the stability data for the specific grade, pack and market, not from a default attached to the ingredient name. The date on the pack is the longest point at which the native ELISA still meets the label claim with a margin. If the data stop earlier, the date stops earlier. A 24-month claim needs 24 months of supporting data or an accepted extrapolation from a shorter, well-behaved dataset. The storage condition belongs on the label and on the specification: cool, dry, sealed, away from odours. A drum stored next to a flavour concentrate can arrive smelling of it, and that is a storage failure visible on the retained sample before it reaches a customer. The quality page describes the batch file, and the COA page shows the parameters that are tracked over time. The full range is on the product page, and the moisture test is defined in the loss-on-drying entry. ### 04 Undenatured type II collagen: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/protein-collagen/undenatured-type-ii-collagen/moq/ Reviewed: 2026-11-19 The minimum order is 1 kg, packed as a foil pouch; production ships in 25 kg fiber drums. Lead time for a catalogue grade is 1–7 days. The 1 kg pack exists so a formulator can test the grade, the flow and the ELISA before committing to a drum. In one lineOne kilogram is the trial pack and the 25 kg drum is the production pack; the order is settled by the grade, the documents and the delivery terms, not by the minimum. ## Why the minimum is 1 kg A capsule trial needs grams, not kilograms: a few hundred capsules at a few hundred milligrams each comes to 100–200 g of powder, and a bench blend with a placebo and a stability pull adds more. One kilogram covers that work with enough material left for a repeat and a retained sample. It is also the smallest pack that can carry a full lot identity, a COA and a sealed label, which a laboratory sample often cannot. The alternative is to buy a 25 kg drum before the formula is fixed. That locks the buyer into a grade, a particle size and a flow behaviour that may not suit the capsule or the stick, and it puts 25 kg of a heat-sensitive powder into storage before the stability trial has started. The drum is the right unit once the grade and the format are settled; the pouch is the right unit while they are not. ## The packs and the label Packaging and formats · undenatured type II collagen | Item | Specification | Use | 1 kg foil pouch | 1 kg net | Bench trial, pilot batch, sample | 25 kg fiber drum | 25 kg net, inner liner | Production batch | 10% grade | 80 mesh, standard | Capsules, tablets, sticks | 20% grade | 80 mesh, made on request | Smaller fill weight per serving | Granulated form | On request | Low-dust handling, blend flow Every pack carries the product name, the source and grade, the lot number, the net weight, the manufacture and expiry dates and the storage condition. The lot number on the pack, the COA and the retained sample has to be the same number. If a pack arrives without a grade on the label, the certificate cannot tell the buyer whether it is the 10% or the 20% target. ## Lead time and what sits behind it The catalogue grade is quoted at 1–7 days from order confirmation when it is in stock. That window covers picking, the outgoing inspection and the document pack; transport time is separate and depends on the destination and the Incoterms. A 20% grade or a granulated form is made on request, so the schedule is confirmed when the order is placed rather than assumed from the stock figure. The documents travel with the lot, not after it. A COA, a technical data sheet, a safety data sheet and the source statement should be ready at dispatch. If a destination needs an animal-origin declaration or a legalised certificate, that requirement belongs in the quotation stage, because it can add time that the 1–7 day stock window does not include. ## What a quotation has to answer Six items a complete quotation answers | Item | What to state | Identity | Product, chicken sternum source, 10% or 20% grade, CAS 9007-34-5 | Quantity and pack | Kilograms, pouch or drum, number of drums | Specification and tests | Native ELISA target, protein, moisture, ash, mesh, contaminants, micro | Documents | COA, TDS, SDS, source and allergen statement, origin | Delivery | Destination, Incoterms, consignee, any destination label requirement | Commercial terms | Payment terms, quotation validity and shipment schedule A quotation that names only the product and a quantity is incomplete. The grade and the native target decide the fill; the pack decides the handling; the documents decide whether the lot can be released in the destination market; the delivery terms decide who carries the risk at each point. The COA page lists the tests that the quotation should repeat, and the grade page explains the target. ## The sample, and what to do with it The 1 kg pouch is a saleable sample pack, not a free sample. Test it on the things the certificate cannot answer: the flow into the capsule or the stick, the blend uniformity with the other ingredients, the colour and odour at the real inclusion level, and the native ELISA after your own process. Run a short stability pull in your pack if the project is close to launch. A sample that passes on paper and fails in the capsule is the outcome the 1 kg pack is meant to catch. Ask which lot the sample came from and whether the production lot will be made to the same grade and specification. A sample from a different lot is still useful, but it does not prove the incoming lot. Keep a retained sample of the trial material and record the lot number with the trial results. ## Terms that belong in the order The order confirmation should state the specification revision, the grade, the pack, the quantity, the delivery terms and the documents. It should also state the overage policy for the native content, the change-control notice period for the standardization blend, the procedure for a nonconforming lot and the retention period for the retained sample. Payment terms and quotation validity are commercial terms and are agreed per order. These clauses matter more for this material than for a commodity powder, because the specification includes a biological property that a process change can move. A change of extraction temperature or drying condition can meet the same protein and moisture lines and still change the ELISA result. The order should make that a notified change rather than a surprise on the next certificate. For the delivery sequence see the logistics page; for the minimum-order definition see the MOQ glossary entry; for the lead-time definition see the lead-time entry. The full range is on the product page. ### 05 Where undenatured type II collagen is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/protein-collagen/undenatured-type-ii-collagen/compliance/ Reviewed: 2026-11-19 In the EU, the US and the UK, undenatured type II collagen is sold as a food ingredient for use in food supplements, not as a medicine. The permission question is usually settled by the ingredient's history and the supplier's file; the harder questions are the source, the native content, the contaminants and the label. This page describes the file as of this review, not legal advice. In one lineUndenatured type II collagen is sold as a food ingredient in the EU, the US and the UK; the file has to prove the source, the native content, the contaminants and the label wording. ## The framework in one view All three markets regulate the finished product, not the drum, and hold the brand responsible for it. The supplier's file supports the ingredient and the statements made about it: what it is, where it comes from, what it measures and what it does not contain. A certificate alone is not that file. The ingredient is a food of animal origin, so the site has to meet the hygiene rules for that category, and the buyer has to name the species and the tissue. Collagen has a long history of food use, which is why it is not a new material in any of the three markets. A specific preparation or a new process can still raise a market-entry question, answered per product rather than per ingredient family. ## European Union Food supplements are governed by Directive 2002/46/EC and by the national rules that implement it. Some Member States require a notification before a supplement is placed on the market, and the notification is the brand's step, not the supplier's. The labelling rules come from Regulation (EU) No 1169/2011: the ingredient list, the quantitative ingredient declaration where the ingredient is named, the allergen declaration, the nutrition declaration, the lot mark and the storage condition. Collagen has a history of use in food before 15 May 1997, the reference date in the novel food Regulation (EU) 2015/2283. That history is why a conventional collagen ingredient is not a novel food. A new extraction process, source or preparation that has not been eaten to a significant degree can still need a case-by-case assessment, so ask for a written novel food status statement for the exact product. Contaminants fall under Regulation (EU) 2023/915 and claims under Regulation (EC) No 1924/2006. Chicken is not on the Annex II allergen list, so no mandatory allergen declaration follows from that list. The word "chicken" still has to appear as the source. The EU regulatory note covers the instruments, and the Annex II entry explains the allergen list. ## United States Under DSHEA, a dietary supplement may contain a dietary ingredient marketed before 15 October 1994, or one with a new dietary ingredient notification accepted by the FDA. The supplier should state which route applies; a brand that assumes the pre-1994 route without a written statement carries an unnecessary risk. The finished product is made under 21 CFR 111 and labelled under 21 CFR 101, including the Supplement Facts panel and the allergen declaration. Chicken is not one of the major food allergens in the US, so it does not trigger the major-allergen declaration on its own. The ingredient statement still names it. Structure/function statements are permitted if they are truthful, not misleading and notified to the FDA within 30 days of marketing; a statement that a product diagnoses or addresses a disease is a drug claim and is not permitted for a supplement. Importers also need the facility registration and the prior notice that apply to the shipment. Those are logistics steps, but they are part of the same file. The US regulatory note sets out the instruments. ## Contaminant limits Contaminant limits · catalogue versus EU food-supplement maximum | Parameter | Catalogue limit | EU supplement limit | Note | Lead | ≤3 mg/kg | 3.0 mg/kg | At the limit, no margin | Cadmium | ≤1 mg/kg | 1.0 mg/kg | At the limit, no margin | Mercury | ≤0.1 mg/kg | 0.10 mg/kg | At the limit, no margin | Arsenic | ≤2 mg/kg | No general maximum | Customer limit | APC | ≤1,000 cfu/g | No harmonised limit | Buyer's specification | Yeast and mould | ≤100 cfu/g | No harmonised limit | Buyer's specification | E. coli | Absent | No harmonised limit | Buyer's specification | Salmonella | Absent | No harmonised limit | Buyer's specification The catalogue lead, cadmium and mercury limits sit exactly at the EU food-supplement maximum, so a compliant lot has no analytical margin. A brand that wants margin should set an internal limit below the regulation and ask for the result against it. The arsenic and microbiological lines are contractual, because the EU has no general harmonised maximum for them in supplements. The UK applies its own retained limits in Great Britain, largely aligned with these figures, and the EU regulation in Northern Ireland; check the current text. ## What the label can say There is no authorised EU health claim for type II collagen, so an EU label cannot attach a health benefit to the ingredient. "Native" and "undenatured" describe the specification and process, not a health effect, and they need the ELISA method and result. "Type II" is an identity statement and needs the type II assay. "10%" is the native content of the powder, not the weight in the capsule. In the US, a structure/function statement is possible within the DSHEA rules, with its notification and substantiation. In both markets a disease-related claim is out of scope for a supplement. The supplier's file supports the ingredient facts; the brand decides the claim and keeps the evidence. No page on this site makes a disease-related claim. ## The document pack Documents a supplement brand should hold for this ingredient | Document | What it proves | Certificate of analysis | Lot values against the specification, with methods | Specification | The agreed ranges, including the grade target | TDS and SDS | Handling, solubility, storage and safety | ELISA method sheet | Antibody, standard and extraction behind the native result | Source and origin statement | Species, tissue, country of origin, animal-origin status | Allergen statement | Chicken declaration and cross-contact controls | Contaminant and micro reports | The results behind the limits table | Market status statement | Novel food position (EU) and NDI route (US) | Stability summary | The shelf life and the pack it was tested in ## Release checklist - The ingredient name on the label matches the specification and the COA. - The source and tissue are named as chicken sternum. - The native content is declared and supported by the ELISA method and result. - The protein factor and the basis are stated on the certificate. - The contaminant results are compared with the destination limits, not only with the catalogue. - The allergen and animal-origin statements are on file and match the label. - The EU novel food and US NDI positions are confirmed in writing for this product. - The claims have been reviewed against the permitted list for each market. - The lot number on the COA, the pack and the retained sample is the same. For the native result itself, see the identity page; for the parameters, see the COA page; for the ordering documents, see the MOQ page. The full range is on the product page. ### 06 How we prove a type II collagen lot is undenatured URL: https://nutrition.rainwoodbio.com/products/protein-collagen/undenatured-type-ii-collagen/identity/ Reviewed: 2026-11-19 Four questions have to be answered separately: is the material protein, is the protein type II collagen, is that collagen still in its native triple-helical form, and does it come from chicken sternum. The release test for the third question is a type II ELISA with an antibody that recognises the native conformation; the protein figure and the source record answer the others. A lot can pass protein and fail native content. In one lineA lot is undenatured only when the native ELISA, the protein figure, the source record and the process temperature agree; any one of them alone can be met by a denatured powder. ## The four layers Identity layers · the question each one answers | Layer | Question | Method | What it cannot show | Protein | Is the material protein? | Kjeldahl, N × 6.25 | Whether the protein is type II or native | Type II | Is the protein type II collagen? | ELISA with a type II specific antibody; amino acid profile | Whether the helix is intact | Native form | Is the triple helix intact? | ELISA with a conformation-dependent antibody; DSC as support | Which species the collagen came from | Source | Is it chicken sternum? | Species and tissue declaration; PCR on request | Whether the native content is present The layers are independent, and each one can pass while another fails. A heat-damaged lot can be genuine chicken type II collagen with a normal protein figure and a low native result. A hydrolysed collagen can be genuine collagen with a normal protein figure and almost no native epitope. A blend can be native and still be diluted below the declared grade. The batch file needs evidence for each layer, and a certificate that reports only one of them has answered one question out of four. The type II line and the native line can come from the same ELISA, but only if the antibody recognises a conformational epitope; a type II antibody raised against a linear peptide reports the type and says nothing about the helix. ## The ratio check The native type II content cannot exceed the protein content, because the native collagen is itself protein. At a 10–20% native content and a protein floor of 50.0%, the native share of the protein is 20–40% at the target. That ratio is the simplest identity check available, because both figures are already on the certificate. A certificate showing 18% native against 55% protein is plausible; one showing 25% native against 20% protein is an analytical impossibility and points to a method or transcription error. The ratio also catches the common confusion between the grade and the protein percentage. "10%" means 10 g of native type II collagen per 100 g of powder, not 10% of the protein and not 10% of a capsule. A powder sold as "50% type II collagen" is a different specification from this one, and the buyer should ask which assay produced the figure before comparing it with a 10% grade. ## What XRD, FTIR and DSC can and cannot show X-ray diffraction on a collagen powder gives a broad, largely amorphous pattern with the diffuse reflections of a fibrous protein. It can show that the material is not a crystalline small molecule, and it can show a change in the packing after a process, but it does not quantify the native content and it cannot be used as a release test for the grade. A certificate that offers an XRD pattern as proof of nativeness has shown a different thing from the one the specification asks for. FTIR shows the amide I, II and III bands and shifts in their position and shape when the helix unfolds. It is a useful research and process tool, but the spectrum of a powder blend is a mixture of all the components, and the band changes are not a calibrated percentage. Differential scanning calorimetry measures the unfolding transition and the temperature at which it happens, which is valuable for setting a process limit and for stability work. None of the three replaces the ELISA as the release assay, and the certificate should say so. ## The adulteration routes Adulteration routes · signature and test | Route | Signature | Test | Hydrolysed collagen or gelatin | Protein and hydroxyproline normal; native result low | Native ELISA plus molecular weight | Type I collagen from hide or fish | Type II result low; source mismatch | Type II ELISA plus species PCR | Type II from another species | Type II assay may cross-react | Species PCR and source audit | Low-potency blend sold as 20% | Native result below the grade target | ELISA on the lot | Non-collagen nitrogen | Protein high; native result low | Protein and native ratio Gelatin and hydrolysed collagen are the hardest routes to see, because the material really is collagen and the protein figure is honest. The difference is the native structure, and the ELISA is the test that separates them. Species substitution is the opposite case: the structure can be native while the species is wrong, which is why the source record and a PCR check sit beside the assay. A low-potency blend is the most common commercial route, and it is caught by running the ELISA on the delivered lot rather than accepting the grade name on the label. ## What to write into the specification - "Undenatured type II collagen, chicken sternum; species and tissue stated on the certificate." - "Native type II collagen 10.0–20.0% by ELISA; antibody, standard and extraction named in the method." - "Protein ≥50.0% by Kjeldahl with N × 6.25; factor and basis stated on the COA." - "Loss on drying ≤8.0%; ash ≤10.0%; ≥95% through 80 mesh." - "Maximum powder temperature in extraction and drying declared; no steam step." - "No added hydrolysed collagen, gelatin or other protein; species PCR available on request." ## Five questions for a supplier - Which ELISA format and which antibody does the method use, and does the antibody recognise a conformational epitope? - What standard and what extraction does the method use, and what is the spike recovery on this matrix? - What are the native and protein results on this lot, and what is the native figure as a share of the protein? - What is the maximum powder temperature in extraction and drying, and is there any steam or hot-water step? - What species, tissue and origin does the certificate declare, and what retained sample is kept for the lot? The answers belong in the batch file, not only in an email. For the parameters they support, see the COA page; for the form decision, see undenatured versus hydrolysed collagen; for the regulatory file, see the compliance page. The full range is on the product page. ### 02.1 Undenatured vs hydrolysed collagen: structure, assay and the label URL: https://nutrition.rainwoodbio.com/products/protein-collagen/undenatured-type-ii-collagen/grades/undenatured-vs-hydrolysed/ Reviewed: 2026-11-19 Undenatured type II collagen and hydrolysed collagen are both collagen, and both carry CAS 9007-34-5, but they are different ingredients. One keeps the triple helix and is specified by a native ELISA in the 10–20% range; the other is cleaved into peptides and specified by protein and molecular weight. The difference decides the assay, the serving size and the label. In one lineUndenatured and hydrolysed collagen share a source and a CAS number but not a structure, an assay or a label, and the specification has to say which one the lot is. ## Two forms, one name Native type II collagen is a triple helix: three polypeptide chains wound together, held by hydrogen bonds, with a molecular weight in the hundreds of kilodaltons for the intact molecule. The helix is what a conformational ELISA detects, and it is the reason the material is described as undenatured. The extraction has to be gentle enough to keep it, which is why the process temperature is part of the specification. Hydrolysed collagen has been through a step that cuts the peptide bonds, usually an enzymatic hydrolysis, sometimes an acid or alkaline one. The product is a mixture of short peptides, typically a few kilodaltons, in a random coil rather than a helix. It dissolves more readily, has little or no native epitope, and is specified by protein content and molecular weight distribution instead of by native content. Denaturation and hydrolysis are not the same thing. Heat unfolds the helix without cutting the chain, so a heat-damaged native powder is still a large collagen molecule but no longer native. Hydrolysis cuts the chain, so the molecular weight falls as well. Both fail a native ELISA, but only one of them changes the molecular weight, and that is why the two tests answer different questions. ## The assay follows the structure Undenatured type II versus hydrolysed collagen · specification lines | Parameter | Undenatured type II | Hydrolysed collagen | Identity | Type II ELISA plus source record | Protein, hydroxyproline and source | Native content | 10.0–20.0% by ELISA | Not a release parameter | Protein | ≥50.0% (N × 6.25) | Typically ≥90% (N × 5.55) | Molecular weight | Intact helix, high molecular weight | ≥90% below 3,000 Da (SEC) | Moisture and ash | ≤8.0% / ≤10.0% | ≤7.0% / ≤2.0% | Particle size | ≥95% through 80 mesh | Typically 40 mesh | Release test | Native ELISA | Kjeldahl plus SEC-HPLC A fully hydrolysed lot cannot meet a native ELISA specification, and a native lot cannot meet a molecular weight cut-off written for a hydrolysate. The two certificates are not interchangeable and neither is a stronger version of the other. A buyer who compares them on the protein line alone will conclude that the hydrolysate is the richer material, when the two powders are sold against different measurements. ## The serving is where the difference shows A hydrolysed collagen label is written in grams: the peptide content per serving is large, and the powder is the serving. An undenatured type II label is written in milligrams of native collagen, and the powder weight is larger than the native figure because the grade is 10% or 20%. At 100 mg of native collagen, a 10% grade needs 1,000 mg of powder and a 20% grade needs 500 mg; at 5 g of collagen peptides, the hydrolysate is the whole 5 g. That arithmetic decides the format. A capsule holds a few hundred milligrams of powder, which suits the native grade and not a multi-gram peptide serving. A stick pack or a scoop suits the hydrolysate. The grade decision inside the native form is on the grade comparison page, and it follows the same fill arithmetic. ## The label has to name the form "Hydrolysed collagen" and "undenatured type II collagen" are different ingredient names, and neither can stand in for the other. A hydrolysate cannot be labelled as undenatured, because the native epitope is gone. A native powder should not be sold as generic "collagen peptides" without saying what it is, because the buyer is paying for a native content that the peptide name does not describe. Where the label names type II, the type II assay has to support it; where it says native or undenatured, the ELISA has to support that too. The source belongs in the same statement: chicken sternum for the native form, and the species and tissue for the hydrolysate. Chicken is not a major allergen in the EU or the US, while fish collagen is, so the allergen declaration follows the source rather than the form. A brand name is not a generic ingredient name, and a label that uses one should also carry the descriptive name. The protein contribution to the nutrition panel is significant for a multi-gram hydrolysate and small for a milligram native serving, which is another reason the two labels do not look alike. The identity page sets out the evidence behind the native and type II wording, and the compliance page covers the market rules. ## When to choose which Choose the undenatured form when the specification is the native content, when the serving is small enough for a capsule or a small sachet, and when the label is going to name type II collagen. Choose the hydrolysed form when the serving is measured in grams, when the product is a clear drink or a powder that has to dissolve, when a neutral taste and a fine peptide curve matter, and when the label is going to say collagen peptides. Do not choose the native form for a clear beverage or for a process that runs hot and wet; the structure will not survive, and the certificate will not describe the powder in the pack. Do not choose the hydrolysate for a label that promises undenatured type II collagen; it cannot meet the assay. Both are animal-derived, so neither supports a vegan claim, and the source statement is required either way. ## What neither form lets the label say Neither form carries an authorised EU health claim, and neither can be presented with a disease-related claim in the EU or the US. A structure/function statement is a separate decision that belongs to the brand and needs its own substantiation; the ingredient file supports the composition, not the benefit. "Native" is a statement about the process and the assay, and it should be used only where the ELISA result and the method back it. The useful comparison between the two forms is composition, serving size and format, not a ranking. For the parameters behind the native figure, see the COA page; for the heat sensitivity of the native form, see the stability page. The full range is on the product page. ### 01 What the COA for whey protein concentrate actually contains URL: https://nutrition.rainwoodbio.com/products/protein-collagen/whey-protein-concentrate/coa/ Reviewed: 2026-11-19 A certificate for whey protein concentrate carries one figure that carries most of the weight and explains itself least: the protein content. It is a nitrogen measurement, multiplied by a conversion factor and expressed against a moisture basis, and each of those choices moves the number. Around it sit the limits that describe the rest of the powder — lactose, fat, ash, moisture, pH, particle size and contaminants. The catalogue sets the limits; the batch COA confirms the lot. In one lineA whey certificate is read backwards: the protein figure means nothing until the nitrogen factor and the dry basis are named, and the lactose, fat and ash limits describe what the powder actually is. ## The parameter list Whey protein concentrate has no CAS number: it is a mixture of proteins, peptides, lactose, fat and minerals, not a single molecule. The certificate is built from the parameters that describe that mixture. The table below is the catalogue parameter list for the WPC 80 grade. Composition and physical parameters · whey protein concentrate 80 | Parameter | Method | Release limit | Appearance | Visual | White to light cream powder | Protein (dry basis) | Kjeldahl, N × 6.38 | ≥80.0% | Moisture | Loss on drying | ≤5.0% | Ash | Gravimetric, furnace | ≤4.0% | Fat | Solvent extraction | ≤6.0% | Lactose | HPLC | ≤5.0% | pH (5% solution) | Potentiometry | 6.5–7.5 | Particle size | Sieve analysis | ≥95% through 80 mesh Heavy metals and microbiology · whey protein concentrate 80 | Parameter | Method | Release limit | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and enrichment | APC ≤10,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent The grade name belongs on the certificate, not only in the covering email. “Whey protein concentrate” without the 80 is a family name, and the lactose and fat limits differ across the family. The grade comparison sets out how far apart two members of that family can be. ## What the protein figure is measured against Kjeldahl digests the sample and measures the nitrogen released, not the protein. The result is multiplied by a conversion factor. For milk proteins the convention is 6.38, which assumes that nitrogen is about 15.7% of the protein mass. An 80.0% figure therefore corresponds to roughly 12.5% nitrogen, and a laboratory using a different factor will report different protein for the same digest. The basis is the second half of the same problem. This catalogue states its figure on a dry basis, which means the moisture is divided out before the calculation. At the 5.0% moisture limit, an 80.0% dry-basis figure corresponds to 76.0% as-is; a specification that does not name the basis can be met by a material four points different from the one intended. A certificate reporting 78.4% is not a weaker lot either — that is what the same nitrogen result gives under the general food factor of 6.25. Three things have to travel together: the protein value, the factor and the basis. A purchase order that copies a percentage without them has copied a conclusion and left the evidence behind. ## Catalogue range, release limit and lot result A release limit defines the window a lot has to sit inside; a lot result is what the bench actually measured on that lot. Both belong on the certificate, against the method, because “conforms to specification” on its own is a verdict with no figures attached to it. Where the limit is a ceiling, lead at 2.9 mg/kg and lead at 0.5 mg/kg both pass the same line, and they are not the same risk in a product dosed at 30 g a day. Some parameters are reported rather than limited. Particle size is the clearest case: the specification requires at least 95% through 80 mesh, and the certificate can still report the measured distribution. A lot can pass the cut-off at the coarse edge of the distribution, and the difference shows up in wetting and flow. What this page describes is a catalogue specification: the level the material is expected to meet. The batch COA confirms the lot that ships, and this site does not publish batch results, batch numbers or customer names. ## What moves between lots The protein and lactose figures follow the whey that went in. Sweet whey from rennet-coagulated cheese and acid whey from casein manufacture are different starting materials, with different ash, calcium and lactose, and a plant that switches source will see the ash figure move before the protein does. Season and stage of lactation move the protein-to-lactose ratio in the milk itself, which is why a specification with a protein floor and no lactose ceiling is easier to meet on paper than in a drum. The separation step is the next lever. Ultrafiltration and diafiltration decide how much lactose and ash are washed out, and the membrane cut-off decides which peptides stay. Drying then sets the moisture, the particle size and part of the colour: a hotter inlet can push the powder from white towards cream and lower its solubility while the protein figure stays where it was. Colour and odour are the least quantitative signals and often the most useful. WPC 80 can pick up a cooked or cardboard note after a hot drying run, and the same note strengthens with moisture uptake in storage. That is a reason to ask for a retained sample and a storage history, not a reason to reject the lot on the protein figure alone. ## When to involve an outside laboratory Send a sample out when the whey source is unfamiliar, when a first shipment is heading into a regulated market, or when the label carries a statement the certificate does not prove. The useful panel answers the open question rather than repeating the certificate: the amino acid profile to check that the nitrogen is protein nitrogen, lactose by HPLC to confirm the grade, melamine and other non-protein nitrogen by LC-MS/MS where that risk exists, and the contaminant panel by ICP-MS on the same sample. A milk protein ELISA on the finished product answers the allergen question the raw-material COA cannot. ## The six lines to compare Six lines decide whether two offers describe the same powder: the protein figure with its factor and basis, the lactose limit, the fat and ash limits, the moisture limit, the allergen statement, and the microbiological limits. Two quotations that agree on 80% protein and disagree on the other five are not quoting the same material. Behind the paper sits the record: which plant ran the lot, which whey source went in, which membrane and drying conditions were used, and what retained sample exists. Accurate paper can still describe a different lot from the one in the truck, so the number on the COA, the drum and the retained sample should be one number. For the full range behind these limits, see the whey protein concentrate product page. The definition of the certificate is in the COA glossary entry, the moisture method is covered by loss on drying, and the file itself is described on the quality page. ### 02 WPC 80 or WPI 90: choosing a whey protein grade URL: https://nutrition.rainwoodbio.com/products/protein-collagen/whey-protein-concentrate/grades/ Reviewed: 2026-11-19 Whey protein concentrate 80 and whey protein isolate 90 are the same starting material separated to different degrees. The grade fixes the protein floor, the lactose and fat that come with it, and the way the powder behaves in a drink or a bar. The protein percentage is the headline; the lactose, the fat and the physical form are the part that decides whether the grade fits the product. This page covers the choice between grades; the arithmetic behind the two numbers is set out on WPC 80 versus WPI 90. In one lineThe grade is the protein-to-lactose ratio and the physical form behind it, not the protein number on its own. ## Why one name covers several materials Whey is the liquid left after milk is coagulated for cheese or casein. Drying it whole gives whey powder, which is mostly lactose. Concentrating the protein by ultrafiltration and washing out lactose and ash gives whey protein concentrate, and the concentration step decides whether the result is a 35, a 50 or an 80. Removing more of the non-protein fraction — by ion exchange, by microfiltration, or by a combination — gives whey protein isolate at 90 or above. The grade is therefore a specification, not a brand. Two suppliers can both offer “WPC 80” and differ in lactose, fat, ash, particle size and how the powder was dried. A label that says “whey protein” without the grade is a family name, and the buyer is entitled to ask which member of the family is in the drum. ## The grades side by side WPC 80 and WPI 90 · catalogue limits and typical values | Point | WPC 80 | WPI 90 | Protein, dry basis | ≥80.0% (N × 6.38) | ≥90.0% (N × 6.38) | Protein, as-is at 5% moisture | 76.0% | 85.5% | Lactose | ≤5.0% | Typically ≤1.0% | Fat | ≤6.0% | Typically ≤1.0% | Ash | ≤4.0% | Process-dependent | Separation | Ultrafiltration and diafiltration | Ion exchange or microfiltration | In water | Opaque, foams on mixing | Clearer, lower foam | Usual fit | Bars, powder blends, opaque drinks | Clear drinks, low-lactose formulas The two rows that matter for most formulas are lactose and fat, not protein. A WPC 80 at its 5% ceiling carries five times the lactose of a WPI 90 held to 1%, and the gap widens per gram of protein delivered because the isolate needs less powder to reach the same dose. ## What changes in the drum Both grades are spray-dried powders, and both can be agglomerated or instantized on request. Agglomeration builds larger, porous particles that wet faster and make less dust; it also lowers bulk density and changes how the powder fills a sachet. The WPC 80 catalogue requires at least 95% through 80 mesh, and an isolate is usually specified the same way, but the measured distribution and the flow behaviour can differ between suppliers and between drying runs. WPC 80 is the more hygroscopic of the two in practice, because the lactose it carries is what takes up water first. In a warm filling room that shows up as sticking on the hopper, lumps in the bag and a powder that no longer flows. WPI 90 has less of that lactose, but it is not exempt: protein itself is hygroscopic, and a fine isolate can cake as firmly as a concentrate once moisture is above the limit. Foam is the other physical difference a formulator notices. A WPC 80 solution foams readily when mixed or pumped, which is welcome in some aerated products and a nuisance in a filling line that needs a still surface. WPI 90 foams less, and the difference is large enough to change the process rather than the recipe. ## What changes in the finished product Dose arithmetic uses the as-is protein figure, not the dry-basis one. To deliver 20 g of protein from a WPC 80 at the 5% moisture limit, the formula needs 20 ÷ 0.76 = 26.3 g of powder. The same 20 g from a WPI 90 needs 20 ÷ 0.855 = 23.4 g. The difference is about 3 g of powder per serving, and it is the powder — with its lactose, fat and ash — that the rest of the formula has to absorb. At those weights, the WPC 80 serving carries at most 1.3 g of lactose and 1.6 g of fat; the WPI 90 serving carries at most 0.23 g of lactose and 0.23 g of fat. For a bar or a flavoured shake those are small numbers. For a clear drink, a lactose ceiling or a very tight carbohydrate declaration they are the numbers that decide the grade. Scoop size follows the same arithmetic. A 25 g scoop of WPC 80 at 76.0% protein delivers 19.0 g, not 20 g. A label that rounds the powder weight instead of the protein will be wrong on the panel, and a serving that is meant to hit a protein claim has to be built from the as-is figure every time. ## What to put in the specification - The grade and the process: whey protein concentrate 80, spray-dried, with agglomeration or instantizing named if required. - Protein with its nitrogen factor and basis: ≥80.0% dry basis by Kjeldahl, N × 6.38. - Lactose, fat, ash and moisture as limits, not as typical values, because these are the parameters that separate one supplier's 80 from another's. - Particle size and the test method, since 80 mesh by sieve and 80 mesh by laser diffraction are not the same measurement. - The allergen statement and the milk declaration, because both grades carry milk protein. The COA page shows how these lines appear on a certificate and what a lot result adds to them. ## When the other grade is the wrong one WPC 80 is the wrong choice when the product has to be clear, when the lactose figure has a hard ceiling, or when the fat the concentrate carries would push the panel past what the label promises. WPI 90 is the wrong choice when the powder is going into a bar that benefits from the fat and lactose for texture and flavour, when foam is part of the product, or when the process has no way to justify separating the protein further than the formula needs. Neither grade is settled by the protein figure on the front of the pack. It is settled by the dose, the matrix and the label, and then written into the specification. The product page carries the catalogue limits for WPC 80, and the compliance page covers how the grade is declared in the EU, the US and the UK. ### 03 Whey protein concentrate is stable dry; moisture and heat decide the rest URL: https://nutrition.rainwoodbio.com/products/protein-collagen/whey-protein-concentrate/stability/ Reviewed: 2026-11-19 Whey protein concentrate 80 is a dry powder, and in a sealed pack at ambient temperature its protein does not degrade. What limits the shelf life is everything around the protein: the moisture the powder takes up, the heat it meets, and the lactose that sits beside the protein in the same particle. Moisture and heat together drive caking, colour change and the loss of available lysine long before the protein figure moves. In one lineDry WPC 80 loses nothing at room temperature; moisture uptake, heat and the lactose it carries set the shelf life. ## The dry powder At the 5.0% moisture limit the powder is a glassy, amorphous solid with a water activity well below 0.3. In that state the Maillard reaction is slow, microbial growth is not possible and the protein is stable for as long as the pack keeps water out. The changes that do occur are physical and chemical at the margins: the powder takes up water from the headspace, particles stick and then cake, and the surface colour drifts from white towards cream. Lactose is the reason the margin is narrow. The lactose in WPC 80 is amorphous after spray drying, and amorphous lactose is hygroscopic and unstable. Above roughly 40–50% relative humidity at room temperature it absorbs water, crystallises, and releases that water into the surrounding powder. The result is a hard cake and a local moisture spike that the rest of the drum did not have. A drum that was inside the specification when it was filled can be outside it after a month in a humid warehouse without any chemical change at all. The protein itself is not the limiting parameter. A lot held dry and cool will still read its protein figure at the end of the shelf life; what moves is the solubility, the colour, the flavour and the available lysine. ## In solution Once the powder is reconstituted, the stability question changes completely. A whey protein solution is a microbial growth medium, it foams when pumped, and it responds to heat. Whey proteins begin to denature in the 65–70 °C range, and a concentrated solution that is heated through that range will thicken and can gel. A ready-to-drink product therefore needs a heat process that is designed around the protein, not a pasteurisation step borrowed from a juice line. pH is the other lever. Whey proteins are least soluble near their isoelectric point, around pH 4.5–5.0, and a drink formulated in that window will be hazy and can sediment. Clear acid drinks are usually built with an isolate rather than a concentrate for that reason. Neutral and mildly acidic systems are more forgiving, but they are also the ones where microbial control is hardest. In liquid form the shelf life is set by the process and the preservative system, not by the powder. A chilled, short-dated drink and a retort-stable one are different formulations of the same ingredient. ## What actually moves the result Stability factors · WPC 80 powder and reconstituted solution | Factor | What happens | Control | Relative humidity | Moisture uptake, lactose crystallisation, caking | Sealed liner, dry store, reseal after opening | Temperature | Faster browning, sticking, loss of solubility | Below 25 °C, away from walls and roofs | Oxygen | Oxidation of the residual fat, off-flavours | Low headspace, nitrogen flush where required | Light | Riboflavin-mediated oxidation and colour drift | Opaque or light-blocking pack | Metal contact | Iron and copper catalyse oxidation | Stainless contact surfaces, no mild steel | Time in solution | Microbial growth, foaming, gelation on heat | Chilled holding, defined hold time Whey carries riboflavin, which is light-sensitive and can act as a photosensitiser in the powder and in the drink. A clear pouch on a lit shelf is a different stability proposition from an opaque drum in a dark store, and the pack choice belongs in the stability discussion rather than in the packaging decision alone. ## The test protocol A stability programme for this powder has two arms. The real-time arm holds the product at 25 °C and 60% relative humidity in the commercial pack and tests at 0, 3, 6, 12, 18 and 24 months. The accelerated arm holds it at 40 °C and 75% relative humidity and tests at 0, 1, 2, 3 and 6 months. The accelerated arm finds failure modes quickly; the real-time arm is what assigns the shelf life. The panel should follow the failure modes rather than repeat the certificate. Moisture and water activity come first, because they explain everything downstream. Then colour, measured instrumentally rather than by eye, and available lysine as the chemical marker for browning. Protein, lactose, pH and solubility show whether the powder still behaves as it did. Microbiology and a sensory check close the panel, because a powder can pass every chemical test and still smell of old milk. ## Formulation and packaging The matrix decides how much of the powder's stability the finished product inherits. A sugar-free powder stick is close to the raw material and behaves like it. A bar brings humectants — glycerol, sorbitol, invert syrup — that raise the water activity of the protein phase and move browning forward even at ambient temperature. A drink brings water, heat and a pH, and the powder's own stability becomes a minor term in the product's. The pack is the other half. A foil laminate with a defined moisture barrier and a full seal is the baseline; a fibre drum relies on its liner, and a liner that has been cut back exposes the powder to the board and to the air. Nitrogen flushing and a desiccant are useful where the headspace is large or the destination is humid, but neither compensates for a pack that is opened and resealed repeatedly on a production line. ## How shelf life is assigned The shelf life is a specification term. It is assigned from real-time data on the commercial pack, it applies only to the storage condition written beside it, and it ends when the pack is opened. A supplier who quotes a period without the storage condition has quoted half a statement. Two boundaries belong in the purchase agreement. The first is the storage condition: a drum stored above the stated temperature or humidity is outside the specification, whatever the date on the label. The second is the re-test or retest period and the retained sample, which are what make a complaint checkable. The quality page explains how a lot's paperwork stays attached to its retained sample. For the parameters that the stability panel tracks, see the COA page; for the pack formats the study is run on, see MOQ and ordering; for the grade that suits a clear or a low-lactose drink, see the grade comparison. The product page carries the catalogue specification behind all of it. ### 04 Whey protein concentrate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/protein-collagen/whey-protein-concentrate/moq/ Reviewed: 2026-11-19 An order for whey protein concentrate is a specification event before it is a quantity event. The smallest quantity is one kilogram, the production unit is a 25 kg fibre drum, and stock material moves in one to seven days once the grade, the pack and the destination are settled. Nearly everything that delays a shipment sits in those last two words. In one lineOne kilogram is enough to prove the powder in a trial, and the 25 kg drum is the unit the production order is built from. ## Why the minimum is one kilogram One kilogram is the smallest quantity that arrives with its own lot number and its own certificate. That is the real reason for the floor. A trial is only worth running if every gram in it comes from the same lot, because lactose, fat and particle size all move between lots, and a trial that mixes two of them measures the blend rather than the ingredient. The quantity is also enough to be useful. A kilogram of WPC 80 at 76.0% protein as-is carries 760 g of protein, which is 38 servings at 20 g each — enough for a bench batch, a repeat after the first result, and a portion held back for a stability pull. A smaller sample would cover the first run and leave nothing for the second. Production orders are easier to size in protein than in powder. The 25 kg drum holds 19 kg of protein at the same 76.0% figure, and a 300 kg order holds 228 kg. If a batch has to deliver a fixed protein weight, the powder weight comes from the as-is percentage, not from the 80 on the specification. ## Packaging Pack formats · whey protein concentrate 80 | Format | Fill | Where it fits | What to watch | Foil pouch | 1 kg | Bench work, pilot runs, samples | Reseal fully; keep the headspace small | Fibre drum with liner | 25 kg | Production | The liner is the moisture barrier, not the board | Agglomerated or instantized | 1 kg or 25 kg | Wetting and dust are the constraint | Lower bulk density; confirm the fill weight Every pack carries the same six pieces of information: product name, grade, lot number, net weight, storage condition and the milk allergen statement. The pouch is a laminate with a resealable closure; the drum is board with an inner liner, and a liner that has been slit and folded back exposes the powder to the board and to the air. The format is not a logistics detail. A 10 kg bag opened on a line and left through a shift behaves differently from a sealed drum, and the stability position changes with it. A specification that names the pack has said something that one which stays silent has left for the buyer to discover. ## Lead time Stock material dispatches in one to seven days. The count starts when the grade, the specification revision, the pack and the shipping address are all agreed; it does not start when the first email lands. A purchase order that arrives before the grade is fixed sits in the inbox rather than in the schedule. Four things take an order out of the stock route: a pack the site does not hold, an agglomerated or instantized grade that has to be scheduled, a document set that has to be issued, and a destination the standard carrier does not serve. Each adds time, and the quotation should say which one applies instead of leaving the buyer to read the delay into the one-to-seven days. ## What a quotation needs A quotation is complete when it answers six questions. Anything less is an indication of interest rather than an offer. - Which grade and which revision of the specification, including the protein factor and the drying process. - How many kilograms, in which pack, for a trial or for a production release. - Where it is going, on which Incoterm, to which address — because these decide the route and the papers. - Which documents are needed: COA, specification, safety data sheet, allergen statement, and any non-GMO, halal or kosher certificate. - Whose label goes on the pack, and what lot marking it has to carry. - When it has to arrive, and whether the carrier or the packaging material is restricted. The first two answers are the easy ones. The other four are where a confirmed order turns back into a question. ## Samples A sample is a document with powder attached. The powder should be drawn from the lot on the purchase order and carry that lot's number, its COA and the milk statement. Powder in a plain bag with no lot number is a demonstration; it cannot support a stability study, a label decision or a complaint. Order enough for two runs. A hundred grams answers whether the powder wets and whether it foams, but it will not survive a formulation change, and it leaves nothing for the retained portion. That is what the 1 kg pouch is for. ## Where the terms end Commercial terms belong in the offer and the agreement between the parties, not on a specification page. What this page can state is the supplier's side: the specification a lot is released against, the pack, the documents and the dispatch window for stock material. What the buyer owns is where it goes, what the pack says, how it is stored on arrival and what the finished product does with it. Three boundaries are worth fixing before the first order. The storage condition and the re-test period, because material kept outside the stated condition is outside the specification. The complaint window and the retained sample, because a claim that cannot be checked against a retained sample cannot be settled. And the definition of the pack, because a specification that names the pouch does not automatically cover a drum. The parameters an order is placed against are on the COA page. The grade and pack it should name are on the grade comparison, and the limits behind both are on the product page. The papers that travel with the drum are listed on the compliance page, and the batch file itself is described on the quality page. The definition of the minimum is in the MOQ glossary entry. ### 05 Where whey protein concentrate is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/protein-collagen/whey-protein-concentrate/compliance/ Reviewed: 2026-11-19 Whey protein concentrate is an ordinary food ingredient in the European Union, the United States and the United Kingdom. It is not a novel food, not a regulated additive and not a drug, and no pre-market approval is needed to sell it as an ingredient. What decides whether a lot can be used is narrower: the milk allergen declaration, the protein and lactose figures behind the label, and the contaminant limits that apply to the product as sold. The file has to show all three. In one lineWhey protein is an ordinary food ingredient in the EU, the US and the UK; the file is about the milk allergen, the protein and lactose figures and the contaminants, not about permission. ## The three checks Check one is status: whether the material may be sold as a food ingredient where it is going. For whey protein the answer is yes. The second is whether the label declares what the material contains: milk protein as an allergen, the grade in the ingredient name, and the protein and sugar figures the panel promises. The third is whether the contaminants are inside the limit for the product as sold, at the dose it is actually taken. Each check has a different owner. Ingredient status sits with the supplier and the importer, the allergen with the recipe and the label, the contaminant limit with the food category and the daily dose, and any claim with the brand. ## European Union Whey protein has a long history of food use in the EU and is not classified as a novel food, as far as this review can establish; a new source or process should still be checked against the current novel food catalogue before launch. Food supplements are regulated by Directive 2002/46/EC, which sets the permitted ingredient categories and the labelling requirements for the finished product. Labelling follows Regulation (EU) No 1169/2011. Milk is on the Annex II allergen list, so a product containing whey protein must emphasise milk in the ingredient list — “whey protein concentrate (milk)” is the usual form. The declaration follows the ingredient into every product that uses it, and a concentrate in a capsule or a stick pack is not exempt. Contaminants are governed by Regulation (EU) 2023/915, which sets the limits in Annex I. They apply to the food supplement as placed on the market, not to the raw material, so the specification has to leave room for the rest of the formula. ## United States In the US, whey protein is used as a food ingredient and as a dietary ingredient in supplements. Where it is sold as a supplement, the facility and records fall under the current good manufacturing practice rule in 21 CFR 111, and the finished product carries a Supplement Facts panel. The supplier should state the basis on which the material is sold, and the buyer should keep that statement in the file. The FALCPA rules make milk a major food allergen. The label has to declare it — “Contains: milk” or a parenthetical in the ingredient statement — and that applies to whey protein concentrate as much as to liquid milk. The panel protein is calculated with a nitrogen factor: US labelling defaults to 6.25 where no specific factor applies, while this specification uses 6.38. The two differ by about 2% on the same nitrogen result, so the label factor should be confirmed before the panel is designed. ## United Kingdom The UK applies its own retained food law. Milk remains one of the 14 allergens to be declared under the Food Information Regulations 2014, and food supplements are covered by the Food Supplements (England) Regulations 2003 and their equivalents in the devolved nations. Contaminant limits are set in retained domestic law rather than by the EU regulation, so the current UK text should be checked before a lot is released for that market. ## The contaminant table Heavy-metal limits · whey protein concentrate used as a supplement, by market | Element | EU | US | UK | Lead | 3.0 mg/kg (as sold) | No federal limit for supplements; state law applies | Retained limit; check the current text | Cadmium | 1.0 mg/kg (as sold) | No federal limit for supplements | Retained limit; check the current text | Mercury | 0.10 mg/kg (as sold) | No federal limit for supplements | Retained limit; check the current text | Arsenic | Not harmonised; member state rules may apply | No federal limit for supplements | Retained limit; check the current text The catalogue specification sets Pb ≤3, Cd ≤1 and Hg ≤0.1 mg/kg, which mirrors the EU supplement limits. Those are ceilings, not targets: a raw material sitting at the ceiling leaves no headroom for the rest of the formula, and a buyer dosing 30 g a day should contract a lower internal limit. Arsenic at ≤2 mg/kg is a specification term, because the EU has no harmonised arsenic limit for supplements generally. ## Claims Disease claims are not available to a food or a supplement in any of these three markets, and none appears on this site. Protein claims are nutrient content claims with conditions. In the EU, “source of protein” requires protein to contribute at least 12% of the energy value and “high protein” at least 20%, measured on the product as sold. In the US, “good source” means 10–19% of the Daily Value and “high” or “excellent source” at least 20%, against a protein Daily Value of 50 g. Wording about what the protein does in the body is a health claim and is not covered by this file. Lactose is a separate matter: neither the EU nor the US has a harmonised definition of “lactose-free”, so the claim needs a threshold and a test method. “Dairy-free” has no harmonised definition either, and it sits badly beside a milk allergen declaration. ## The document pack - Batch COA with protein, lactose, fat, ash, moisture, pH, particle size and the contaminant results. - Specification and technical data sheet naming the grade, the process and the protein factor. - Safety data sheet in the 16-section format. - Allergen statement declaring milk, and a statement covering any carrier in the pack. - Statement of the basis for sale as a food or dietary ingredient in the destination market. - Non-GMO statement, and halal or kosher certificates where the market requires them. ## What to check before the first order - Does the ingredient name carry the grade, and does the label protein figure match the as-is protein of that grade? - Is milk declared on every pack and in every finished product, including capsule and stick formats? - Do the contaminant results leave headroom under the limit for the product as sold at the intended dose? - Is every claim on the label a nutrient content claim, and is the lactose wording defined? The product page carries the specification behind this page. The grade decision is on the grade comparison, the allergen terminology is in the Annex II glossary entry, and the market summaries are on the EU, US and UK regulatory pages. ### 06 How we prove a whey protein lot is WPC 80 URL: https://nutrition.rainwoodbio.com/products/protein-collagen/whey-protein-concentrate/identity/ Reviewed: 2026-11-19 A lot is WPC 80 when four measurements agree: the protein figure against its nitrogen factor and basis, the amino acid profile behind that protein, the lactose and fat that the grade allows, and the physical form of the powder. Any one of them can be met by a different material. That is why identity is built from four tests rather than one, and why the protein percentage alone is the weakest evidence in the file. In one lineWPC 80 is proved by four figures together — protein against its factor, the amino acid profile, the lactose and fat, and the physical form — because any one of them can be met by a different powder. ## The four layers The first layer is total protein by Kjeldahl with the N × 6.38 factor, on a dry basis, against the 80.0% floor. It tells you how much nitrogen the powder carries, and nothing more. The second is the amino acid profile. Whey protein has a characteristic pattern: high leucine, high lysine, a comparatively high cysteine and a low arginine. A plant protein added to the drum moves that pattern, and a nitrogen source that is not protein does not move it at all. The third is the non-protein fraction. Lactose at ≤5.0%, fat at ≤6.0% and ash at ≤4.0% are the numbers that separate an 80 from a 35 and from whey powder, and they are the simplest tests in the set. The fourth is the physical form. X-ray diffraction, infrared spectroscopy, particle size, solubility and pH confirm that the material is the spray-dried amorphous powder the specification describes, rather than a blend, a crystallised lot or a different process. ## The protein factor and the ratios behind it The 6.38 factor assumes that nitrogen is about 15.7% of milk protein, so an 80.0% figure corresponds to roughly 12.5% nitrogen. Two ratios then carry most of the identity argument. The first is protein to lactose: a WPC 80 with 80% protein and 5% lactose sits at 16:1 or above, while sweet whey powder at 12% protein and 70% lactose sits near 0.17:1 and a WPC 35 sits near 0.7:1. A powder that reports 80% protein with a lactose figure closer to whey powder is not a concentrate; it is a blend, or the protein figure is being carried by something other than protein. The second is the nitrogen gap. The sum of the amino acids, expressed as protein, normally comes in slightly below the Kjeldahl figure, because tryptophan and cysteine are partly lost in acid hydrolysis. A gap of two or three points is analytical; a gap of five or more is a signal that the nitrogen is not all protein nitrogen. The arithmetic explains why the gap matters. One percent of melamine adds about 4.25 percentage points of apparent protein under the 6.38 factor, one percent of glycine adds about 1.2, and one percent of taurine adds about 0.7. None of them appears in an amino acid profile as protein, and all of them move the number at the top of the certificate. ## What diffraction and infrared add Spray-dried whey protein is amorphous. An X-ray diffraction pattern of the powder is therefore a broad halo with no sharp reflections, and that halo is itself a positive identification of the process. Sharp reflections mean a crystalline phase is present: alpha-lactose monohydrate from moisture damage, a crystalline amino acid such as taurine, glycine or leucine added as a nitrogen source, or an inorganic salt. The same scan is the quickest way to see whether a drum has crystallised in storage. Infrared spectroscopy adds the functional-group view. The amide I band near 1650 cm⁻¹ and the amide II band near 1545 cm⁻¹ come from the protein backbone, and the carbohydrate region shows the lactose. Compared against a reference spectrum of the same grade, FTIR confirms the material class in minutes; it cannot quantify the protein, and it is not a substitute for the Kjeldahl figure. The XRD method note and the FTIR method note describe what each technique can and cannot settle. ## The routes that are actually used Adulteration routes · what changes and which test catches it | Route | What it changes | Test that catches it | Sweet whey powder added | Lactose and ash up, protein down, ratio collapses | Lactose by HPLC, ash, protein-to-lactose ratio | WPI used to lift the figure | Protein above 80, lactose below 2%, grade misdeclared | Protein, lactose, ratio against the grade | Soy or pea protein added | Arginine up, methionine down, phytate present | Amino acid profile, PCR for soy or pea DNA | Non-protein nitrogen | Kjeldahl up, amino acid sum unchanged | Amino acid profile, melamine by LC-MS/MS, urea | Maltodextrin or starch | Carbohydrate by difference up, lactose flat | Carbohydrate and sugar profile, iodine test | Vegetable fat | Fat above the grade, sterol pattern changes | Fat determination and sterol profile The first two routes are the common ones, and neither is dangerous. They are commercial substitutions: a lower grade sold as a higher one, or a blend that meets the protein figure while missing the lactose ceiling. The later routes are the ones that matter for safety, and they are the reason a protein figure without an amino acid profile is an incomplete identity file. ## What to write into the specification - The grade, the process and the physical form: whey protein concentrate 80, spray-dried, with the mesh stated. - Protein with the factor and the basis: ≥80.0% dry basis by Kjeldahl, N × 6.38. - Lactose, fat, ash and moisture as limits, with the method beside each. - An amino acid profile as an identity parameter, reported as g per 100 g of protein, not as a single number. - A non-protein nitrogen check — melamine by LC-MS/MS where the risk exists — as a release test rather than an annual audit. - The milk allergen statement, because both the grade and any blend carry it. An identity specification that lists only protein, moisture and ash is a specification for a white powder, not for whey protein concentrate. The COA page shows how these lines fit onto the certificate. ## Five questions for a supplier - Which nitrogen factor and which basis does the certificate use, and can you show the nitrogen result as well as the protein figure? - Will you supply the amino acid profile for the lot, and does the sum reconcile with the Kjeldahl figure? - What is the lactose limit on the grade you are quoting, and is it tested on every lot or only on the specification? - Has the powder been tested for melamine or other non-protein nitrogen, and by which method? - Can the retained sample be traced to the lot number on the drum? None of these questions is unusual, and a supplier who cannot answer them is describing a material rather than documenting one. The grade comparison explains how far apart the grades can sit, and the product page carries the catalogue limits that a specification starts from. ### 02.1 WPC 80 vs WPI 90: protein, lactose and the label URL: https://nutrition.rainwoodbio.com/products/protein-collagen/whey-protein-concentrate/grades/wpc-vs-wpi/ Reviewed: 2026-11-19 WPC 80 and WPI 90 differ by about ten points of protein, four points of lactose and five of fat, all measured on the same dry basis. Those gaps change how much powder a serving needs, how clear the drink is and what the label can say. Once the dose is fixed, the protein figure is the least interesting of the differences. In one lineThe choice between WPC 80 and WPI 90 is made on lactose, fat and clarity at the dose, and only then on the protein figure that appears on the label. ## The protein figure and what the grade number means Both numbers are dry-basis floors, not the protein in the powder as sold. WPC 80 is at least 80.0% protein on a dry basis and WPI 90 at least 90.0%, both calculated with Kjeldahl nitrogen and the 6.38 factor for milk protein. At the 5.0% moisture limit those become 76.0% and 85.5% as-is, because the water in the powder dilutes the figure. The grade number is also a floor rather than a measurement. A lot at 83% protein can still be sold as WPC 80 if the specification says ≥80.0%, and a lot at 81% is not a worse material than one at 84% unless the specification says so. What the buyer should compare is the release limit and the lot result, not the number in the product name. The dose arithmetic is where the ten points turn into grams. To deliver 20 g of protein, WPC 80 needs 26.3 g of powder at the moisture limit and WPI 90 needs 23.4 g. The difference is about 3 g of powder per serving, and it is the powder — with its lactose, fat and ash — that the rest of the formula has to carry. ## Lactose and fat at the dose What 20 g of protein carries · per serving, at the limits used in the grade comparison | Per 20 g protein | WPC 80 | WPI 90 | Powder needed | 26.3 g | 23.4 g | Protein, as-is | 20.0 g | 20.0 g | Lactose, at the limit | 1.31 g | 0.23 g | Fat, at the limit | 1.58 g | 0.23 g | Ash, at the limit | 1.05 g | Process-dependent Lactose is a reducing sugar, which matters beyond the carbohydrate figure. In a bar with humectants, or in a drink that meets heat, the lactose and the lysine in the protein are the two partners in the Maillard reaction that browns the product and lowers the available lysine. Cutting the lactose by a factor of five does not stop browning, but it removes most of the substrate. Lactose is also not the allergen. Milk protein is. A WPI 90 with 1% lactose still contains milk protein and still carries the milk declaration, so the difference between the grades is a composition difference, not an allergen-free option. The compliance page covers the declaration both grades share. ## What changes in the glass and on the line In water, WPC 80 gives an opaque, milky dispersion that foams readily when mixed or pumped. WPI 90 gives a clearer solution with less foam. Neither is a defect; they are different ingredients, and a clear ready-to-drink product is built around the isolate for that reason. Acid systems sharpen the difference. Whey proteins are least soluble near pH 4.5–5.0, and a concentrate at that pH is hazy and can sediment, while an isolate holds a clearer solution. A neutral or mildly acidic shake can use either grade, and the choice then comes back to lactose and fat rather than clarity. In a bar, the concentrate's fat and lactose are part of the matrix: they carry flavour and soften the texture. The isolate brings more protein per gram of powder and less of everything else. Both can be agglomerated or instantized, which changes how the powder wets and how much dust it makes on a filling line but not what the label declares. ## How the two are declared In the EU, the ingredient list names the grade and emphasises the allergen: “whey protein concentrate (milk)” or “whey protein isolate (milk)”, with milk in bold or capitals as Regulation (EU) No 1169/2011 requires. In the US, the same names appear in the ingredient statement and the FALCPA declaration follows, either as “Contains: milk” or in a parenthetical. “Whey protein” alone is a family name. A label that names a grade in the product name and a different grade in the ingredient list has a problem that no certificate fixes, and a supplement that declares “whey protein” without a grade has left the buyer to guess which one it is. ## What the regulation does not change Both grades are ordinary food ingredients in the EU, the US and the UK, and neither needs approval or a notification. Neither is a novel food, and neither sits in a different regulatory category from the other. The contaminant limits apply to the finished product as sold, not to the grade, so moving from concentrate to isolate does not change the limit that has to be met. Protein claims work the same way for both. In the EU, “source of protein” requires protein to supply at least 12% of the energy value and “high protein” at least 20%; in the US, “good source” means 10–19% of the Daily Value and “high” at least 20%. The same 20 g of protein can be “high protein” in a 200 kcal drink and only “source of protein” in a 500 kcal one, whichever grade supplied it. The NRV glossary entry sets out the reference values behind those percentages. ## When to choose each Choose WPC 80 when the product is opaque, when the fat and lactose help the matrix, when a bar or a powder blend can carry 26 g of powder per serving, and when the specification's lactose ceiling of 5% is inside what the formula allows. Choose WPI 90 when the drink has to be clear, when the lactose ceiling is below what a concentrate can hold, when the serving cannot carry the extra 3 g of powder, or when the browning risk in a warm or high-moisture matrix has to be reduced. Neither choice is settled by the protein percentage. It is settled by the dose, the matrix and the label, and then written into the specification as a grade, a lactose limit and a particle size. The grade comparison sets out the wider grade logic, the COA page covers the tests behind the numbers, and the product page carries the catalogue specification for WPC 80. ### 01 What the COA for algal DHA powder actually contains URL: https://nutrition.rainwoodbio.com/products/fatty-acids/algal-dha-powder/coa/ Reviewed: 2026-11-19 An algal DHA certificate reports three things about one lot: DHA by gas chromatography, the oxidation state of the oil, and what the rest of the powder is. The catalog specification is DHA (GC) ≥10.0%, moisture ≤5.0%, peroxide value ≤5.0 meq/kg, p-anisidine value ≤20.0 and a declared modified-starch carrier. The certificate records that a lot met those limits; the specification is only the gate. In one lineA DHA certificate has to carry the GC figure and the oxidation figures side by side, because 10% DHA and a low peroxide value are separate facts about the same lot. ## What the certificate has to carry Read a certificate as a series of statements about one lot, each with a method and a limit attached. A line with a method but no limit says nothing about the release decision. Identity, assay and oxidation limits · microencapsulated algal DHA powder 10% | Parameter | Method | Release limit | DHA (identity and assay) | GC-FID of methyl esters; peak identified against a DHA standard | Peak at the expected retention time; ≥10.0% | EPA | GC-FID, same run | Reported | Moisture | Gravimetric, vacuum oven | ≤5.0% | Peroxide value | Titrimetric; AOCS Cd 8b-90 or ISO 3960 | ≤5.0 meq/kg | p-Anisidine value | Spectrophotometric; AOCS Cd 18-90 or ISO 6885 | ≤20.0 | Carrier | Declaration with mass balance | Modified starch, declared | Particle size | Sieve analysis | ≥95% through 40 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count, absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent Appearance belongs on the same sheet: off-white to light yellow, free-flowing. Colour is not a release limit in the way the assay is, but a brown cast is a reason to read the oxidation lines first. The lot code, the manufacture date and the expiry date belong there too: an analysis with no lot attached cannot be traced to a drum. ## What the 10% figure measures The 10.0% figure is grams of DHA per 100 g of powder, set by the oil's DHA content and the oil load in the encapsulation. An oil in the 35–45% DHA range needs a load of roughly 22–29% to reach 10%, and analysed alone it would report 35–45%. The certificate therefore has two denominators, powder and extracted oil, and should say which one the result uses. Calibration matters as much as the denominator. A GC run on methyl esters can be quantified against an internal standard, giving grams per 100 g, or normalised to peak area, giving a composition of the extracted oil. Area percent is a valid profile; it is not a content claim on the powder. Check whether the result is as sold or on a dried basis — at moisture ≤5.0% the gap is small, not zero. DHA is one fatty acid, not a synonym for omega-3. Algal oil is DHA-dominant with a small EPA fraction and a measurable DPA fraction, so a certificate reporting only total omega-3 does not state the DHA content a label must declare. ## Release limit versus batch result A limit is the boundary for release; a result is what the laboratory found. Keep them in separate columns, with the method named. If the result column repeats the range, the gate has been copied and no measurement is recorded. “Passes specification” should be checkable, not a substitute for the numbers. Peroxide value and p-anisidine value describe two stages of one process. Peroxide value titrates hydroperoxides, the first products of lipid oxidation, and can fall again as they decompose. p-Anisidine value measures the aldehydes that follow, so it rises later and stays. A lot at peroxide value 1.0 with p-anisidine 18 is further into oxidation than one at peroxide value 4.0 with p-anisidine 3, though both pass. Read the pair, not the first number. The two limits combine as TOTOX, twice the peroxide value plus the p-anisidine value. At the catalog ceilings, 5.0 meq/kg and 20.0, TOTOX is 30; a ceiling combination is a pass, not a target. Moisture is a limit because water plasticises the starch wall and gives oxygen a faster route to the oil. Carrier is a declaration line because modified starch is the wall itself, not an impurity, and must be consistent with the DHA figure and oil load. If DHA is 10.0% and the oil load is absent, the sheet is incomplete. ## What moves between batches DHA moves with the fermentation lot, the oil refining and the encapsulation; a change of oil supplier, deodorisation step or dryer setting can shift it. A lot at 9.9% is a process drift to investigate, not proof of a bad material. Peroxide and p-anisidine values move with heat, oxygen, light and time, and a lot that left clean can arrive higher if the pouch is not a barrier. Moisture moves with drying and humidity at packing, particle size with the mill and sieve, and colour and odour with oxidation before any number moves. Retained samples turn those movements into a trend: compared with a limit a result says pass or fail, compared with the previous five lots it says which way the process is going. The stability page follows those trends through storage. ## When an outside laboratory earns its fee An outside laboratory is worth commissioning on a new source, a first delivery into a regulated market, a contested result, or a buyer that tests every incoming lot. The useful panel answers what the certificate leaves open: GC-FID with a DHA standard and the full fatty-acid profile, peroxide and p-anisidine values by a named method, sterols where the algal source is in doubt, ICP-MS for the metals, and a plate count with absence tests. Two details decide what the report is worth. A “not detected” line needs a limit of quantification, otherwise it describes the method, not the sample. And on a microencapsulated powder the oxidation figures are measured on oil recovered from the matrix; recovery can add or remove peroxides, so ask how the oil was recovered and whether the figures refer to that oil or back to the powder. ## What to compare between suppliers Compare six lines, not one. Quotations that match on DHA and diverge on the rest describe different powders under the same name. Six lines that decide whether two algal DHA offers describe the same powder | Line | What to request | What it exposes | Source | Algal oil supplier, strain and origin | Same assay, different source file | DHA result | Lot result, GC setup and standard | A lot result, not a copied range | Profile | EPA and DPA alongside DHA | A concentrate from a different oil spectrum | Oxidation | PV and p-AV, methods and oil recovery | A fresh oil from an aged one | Carrier | Modified starch identity and oil load | A declared wall from an undeclared dilution | Traceability | Lot code on COA, pack and retained sample | A certificate from another drum The catalog specification sits on the algal DHA powder product page. The tests that separate algal oil from fish oil are on the identity page, certificate terms are in the COA glossary entry, and the way evidence is retained is described on the quality page. ### 02 Algal DHA or fish oil: choosing an omega-3 source URL: https://nutrition.rainwoodbio.com/products/fatty-acids/algal-dha-powder/grades/ Reviewed: 2026-11-19 Both products are sold as omega-3 powders, but a 10% algal DHA powder and a 10% fish oil powder do not declare the same thing. The algal product is standardised on DHA alone at ≥10.0% by GC; the fish product is standardised on EPA plus DHA at ≥10.0%, so its DHA per gram is generally lower. The source also decides the allergen statement and the name on the ingredient list. In one lineThe source decides what the label can say, and the grade decides how much powder a declared intake needs; they are separate decisions. ## Two sources, one powder format An omega-3 powder exists to put an oil into a dry matrix: a capsule, a stick, a gummy or a beverage. The oil can come from a fermented alga or from rendered fish, and either oil can be encapsulated in a starch wall and milled to a mesh size. The physical format is therefore not the decision. The fatty-acid profile, the allergen position and the source file are. Algal DHA is produced by fermentation, so the oil is DHA-dominant with a small EPA fraction and a measurable DPA fraction. Fish oil is a mixture in which EPA and DHA both matter, and the ratio between them varies with the species and the season. A formulator who needs a declared DHA figure and a fish-free label starts elsewhere than one who needs a total omega-3 figure and an established fish-oil name. ## What the two 10% powders actually declare Label basis of a 10% algal DHA powder and a 10% fish oil powder | Line | Algal DHA powder 10% | Fish oil powder 10% | Standardised on | DHA ≥10.0% by GC | EPA + DHA ≥10.0% by GC | DHA per 100 g | At least 10 g | A fraction of the 10% total, reported on the COA | EPA | Small fraction, reported | Reported, usually a larger share | Ingredient list | Algal oil (Schizochytrium sp.) | Fish oil | Allergen | Not a fish ingredient | Fish is a declared allergen The trap is the word “10%”. Two quotations can both say 10% and describe different quantities of DHA, because one percentage is a single fatty acid and the other a sum. A specification that says only “omega-3 10%” does not say which fatty acid the figure refers to, and the label needs DHA, not the sum. ## What the grade does to the powder The catalog grade is the 10% powder at ≥95% through 40 mesh. A 20% grade is available on request, and the trade is simple arithmetic: twice the DHA per gram, half the powder per serving, and a higher oil load inside the same starch wall. At 10% DHA the wall is the larger part of the powder; at 20% the oil is a much bigger share of the particle, so the barrier has less material to work with per gram of oil and the powder depends more on the pack. Mesh and flow matter as much as the assay on a filling line. A 40 mesh powder flows into capsules and stick fills, disperses in water without dissolving — the oil sits inside the wall, so the dispersion is a suspension, not a solution — and compresses into a tablet only at a low oil load. Gummies and chews add heat and water; beverages add both plus a long hold time. Each matrix needs a trial with the actual powder, not with a similar grade from another supplier. ## What the grade does to the dose arithmetic The percentage converts a label figure into powder weight. At 10% DHA, one gram of powder carries 100 mg of DHA; at 20%, 200 mg. A label that declares 200 mg DHA per serving therefore needs 2.0 g of the 10% powder or 1.0 g of the 20% grade, before any overage the brand decides to add. The same arithmetic runs the other way: a fixed capsule fill caps the DHA a capsule can declare. Powder weight for a 200 mg DHA declaration, before overage | Grade | DHA basis | Powder for 200 mg DHA | Algal DHA 10% | ≥10.0% by GC | 2.0 g | Algal DHA 20% | Set on the order, on request | 1.0 g at a 20% result | Fish oil 10% | EPA + DHA ≥10.0% | From the lot's DHA result, not the 10% sum A 500 mg capsule filled with the 10% powder carries about 50 mg of DHA, so a 200 mg declaration needs four capsules or a larger fill. That is where the 20% grade, a bigger capsule or another dosage form becomes the design question — a question about the label, not the powder's quality. ## How to write the specification Name the source and the grade in the product name: “Microencapsulated algal DHA powder 10%.” Then write the analytical lines: “DHA ≥10.0% by GC (CAS 6217-54-5); EPA and DPA reported on the same run; oil from Schizochytrium sp.; carrier modified starch, declared; moisture ≤5.0%; peroxide value ≤5.0 meq/kg; p-anisidine value ≤20.0; ≥95% through 40 mesh; heavy metals Pb ≤3, As ≤2, Cd ≤1, Hg ≤0.1 mg/kg; APC ≤1,000 cfu/g, yeast and mould ≤100 cfu/g, E. coli and Salmonella absent; allergen statement: no fish ingredient.” Two clauses prevent most misunderstandings. First, the CAS number identifies DHA, not the powder; it belongs on the specification as the marker, next to the assay. Second, add the negative line that the label depends on: “Not fish oil; no fish-derived carrier.” A negative line is only useful if the file can support it, so pair it with the source statement and the fatty-acid profile. ## When the powder is the wrong choice The powder is not the automatic answer. A softgel holds oil directly, and one gram of fill carries far more DHA than one gram of a 10% powder, so a high-dose softgel is usually an oil project. A clear beverage is a poor fit unless the formula tolerates haze and sedimentation. A market that does not permit the carrier, or a label that names fish oil, rules the powder out for reasons unrelated to its assay. The source choice also belongs to the label, not only to the formula. Switching from fish oil to algal DHA changes the ingredient name, the allergen statement and possibly the regulatory route, which is a change-control event. The algal versus fish oil page takes the label question line by line; the compliance page sets out the market files, and the fish oil powder page carries the comparison specification. The catalog grade sits on the algal DHA powder hub. ### 03 Algal DHA powder: oxidation, carrier and the shelf life URL: https://nutrition.rainwoodbio.com/products/fatty-acids/algal-dha-powder/stability/ Reviewed: 2026-11-19 A starch wall stands between the oil and the air in this powder, which makes it more resistant to oxidation than the bare oil in an open dish. It does not seal the oil off. The peroxide value and the p-anisidine value move in any pack over time, and those two figures, not the DHA assay, decide when the powder stops being usable. In one lineThe wall slows oxidation but does not stop it; the peroxide and anisidine values, not the DHA assay, decide the shelf life. ## The dry powder: moisture is the first variable The catalog limit is moisture ≤5.0%, and the reason is mechanical as much as chemical. Modified starch is hygroscopic: it takes up water from humid air, the wall softens, and the oil inside becomes more mobile and more exposed to oxygen diffusing through the matrix. Water also lowers the glass transition of the wall, so a powder that is crisp at 4% moisture can cake and clump at 7% without any change in the DHA figure. That makes the pack part of the specification. The 1 kg foil pouch is a barrier against humidity and oxygen; the 25 kg fiber drum relies on its inner liner, and the liner is only a barrier while it is intact. A drum that is opened, sampled and closed in a humid room has a different history from one that stays sealed. Store the powder closed, cool, dry and out of light, and write the storage condition into the specification rather than leaving it to habit. ## The dispersed powder: water changes the clock The powder disperses in water; it does not dissolve. The starch wall hydrates, the particles swell, and the oil becomes reachable by dissolved oxygen, by trace metals in the water and by anything else in the formula. A beverage therefore exposes the oil to conditions the dry powder never sees: pasteurisation or UHT heat, shear from homogenisation, a pH that can sit anywhere from 2.5 to 7, and a hold time measured in weeks. A dry stick pack is the opposite case. Its stress is humidity through the film and oxygen in the headspace over months, not water in the product. The same powder can pass a dry stability study and fail quickly in a wet matrix, which is why the matrix belongs to the stability plan. If the project is a beverage, the trial is a beverage trial. ## What drives oxidation, and what to do about it Oxidation drivers for microencapsulated algal DHA powder | Factor | What it does | Control | Oxygen | Forms hydroperoxides at the oil surface | Barrier film, low headspace, nitrogen where the line allows | Heat | Accelerates both oxidation steps | Control process temperature and storage temperature | Light | Photo-oxidation, faster at the pack surface | Opaque or metallised pack, dark storage | Moisture | Hydrates the wall and frees the oil to move | ≤5.0% moisture, sealed pack, desiccant where justified | Metal ions | Iron and copper catalyse hydroperoxide breakdown | Check water, mineral premixes and contact surfaces | Shear | Ruptures capsules and exposes free oil | Limit homogenisation energy and milling time | Time | Even a perfect pack has a limit | Assign the shelf life from a study, not from a habit The wall also has a capacity limit. At 10% DHA the wall is the larger part of the particle, so the oil is well separated; at 20% the oil load is higher and each gram of wall has more oil to protect. Surface oil that sits outside the capsule oxidises first and shows up as an odour before any bulk measurement moves, which is why odour belongs in the sensory check. ## Designing a study that answers the question A useful study tests the pack that will be sold, at the fill weight that will be sold, with the tests that will be released. Typical conditions are 25 °C/60% RH for long-term data, 30 °C/65% RH as an intermediate point and 40 °C/75% RH for acceleration, with timepoints at 0, 1, 2, 3, 6, 9, 12, 18 and 24 months as the study allows. At each point, measure DHA by GC, peroxide value, p-anisidine value, TOTOX, moisture, appearance and odour, and the microbiological panel at the first and last timepoints. The accelerated condition predicts; the real-time condition assigns. A 40 °C result that shows the peroxide value climbing is a warning about the pack and the formula, not a shelf life in itself. If the powder starts at a peroxide value of 4.5 meq/kg against a limit of 5.0, the study has almost no headroom, and the first question is why the lot started that high rather than how long it will last. Read the whole curve, not one point. Peroxide value can rise and then fall as hydroperoxides decompose, while p-anisidine value keeps climbing; a falling peroxide value with a rising anisidine value is advanced oxidation, not recovery. TOTOX, twice the peroxide value plus the anisidine value, is the summary line that keeps the two together. The COA page explains the release limits behind those figures. ## The matrix is part of the shelf life The same powder can have two different shelf lives in two different products. A stick pack with a high-barrier film and a dry fill is the gentlest environment. A gummy adds heat, water and an acidic pH during processing and holds the powder in a moist matrix afterwards. A tablet adds compression heat and pressure. A beverage adds water, dissolved oxygen and a long hold. Minerals and ascorbic acid in the same formula can recycle trace metals and accelerate oxidation, so the premix is part of the study. Flavour is a practical instrument here. A fishy or painty note in a flavoured product is a signal that the oil is oxidising, and it often appears before the release chemistry fails. If the formula depends on flavour to mask the powder, the masking has to survive the same storage as the DHA. ## How a shelf life is assigned A shelf life belongs to a pack, a matrix and a set of test results. It is not a property of the ingredient name. Ask for the study report, the pack and fill weight it used, the timepoints, the test methods and the criteria for failure; a number with no study behind it is a claim, not data. Ask also whether the value is an expiry date or a retest date, because the two carry different obligations for the buyer. Then compare the study with your own pack and your own matrix. If they differ, the supplier's number is a starting point, not a conclusion. The MOQ and packaging page covers the pack formats, and the quality page describes how study data and retained samples are kept. The catalog specification itself sits on the algal DHA powder hub. ### 04 Algal DHA powder: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/fatty-acids/algal-dha-powder/moq/ Reviewed: 2026-11-19 One kilogram is the qualification unit for this powder: it is the smallest quantity that lets a laboratory run the powder in your own matrix, and it is drawn from a released lot with a batch COA. Above that, orders are built from two standard packs, a 1 kg foil pouch and a 25 kg fiber drum, with a 1–7 day lead time from released stock. The minimum is a working quantity, not a commercial threshold. In one lineA one-kilogram draw from a released lot is the unit that qualifies the material; the pack, the destination and the documents shape the rest of the order. ## Why the minimum is one kilogram A qualification trial needs enough powder for a bench batch, a repeat batch, an accelerated stability point and a retained sample. A few grams answer whether the powder disperses; they do not answer whether a 2 g stick pack still passes its peroxide limit after three months. One kilogram covers those trials at pilot scale and leaves a sample to compare with the next lot. The lot, not the pack size, is the unit of qualification. A sample drawn from a production lot carries that lot's COA, its peroxide and p-anisidine values and its DHA result; a generic sample from a display jar carries none of them. Ask for the lot code before the trial starts, and keep the trial powder sealed until it is used, so the comparison at the end is between two known materials. The minimum applies per shipment and per grade. A project that needs the 10% powder and a 20% trial has two lines, and a project that splits a delivery across two destinations has two shipments. Say which is which in the enquiry, because the answer changes the pack and the documents. ## The two standard packs Standard packs for microencapsulated algal DHA powder | Pack | Net weight | Typical use | Foil pouch | 1 kg | Bench and pilot trials, sample retention, small batches | Fiber drum with inner liner | 25 kg | Production runs, capsule and stick filling The pouch is the barrier pack: foil keeps humidity and oxygen away from a hygroscopic starch wall and can be resealed after sampling. The drum relies on its inner liner for the same protection, and the liner stops being a barrier once it is torn. A drum that is opened for a partial withdrawal and closed again in a humid room has taken up water, so a production plan that draws from a drum over several weeks should say so and plan the session accordingly. ## Lead time and what changes it The standard lead time is 1–7 days for a released lot in a standard pack. The range is wide because it covers the difference between a single pouch picked from stock and a drum that has to be allocated, labelled and prepared for export. The document pack runs in parallel: a COA, a specification and an allergen statement can usually be issued with the lot, while a customer-specific certificate or a legalised document takes longer. Two requests sit outside the standard line. The 20% grade is a production request rather than a stock item, and agglomerated powder is made to order. Both need a confirmed specification and a production slot before a date means anything, and both should be quoted with the pack that the run will use. Ask for the date against the lot you are buying, not against the product page. ## What a quotation needs to be comparable Two quotations for “algal DHA powder” can describe different materials, so the enquiry has to fix six things before the numbers can be compared: - The product name, source and grade: microencapsulated algal DHA powder 10%, oil from Schizochytrium sp., modified-starch carrier. - The specification and methods: DHA ≥10.0% by GC, EPA and DPA reported, moisture, peroxide and p-anisidine values, mesh, heavy metals and microbiology. - The pack and the quantity: 1 kg pouches, 25 kg drums, or a mix, with the number of each. - The destination and the delivery term, because both decide the documents and the transport pack. - The document set required: COA, specification, SDS, allergen and source statement, origin, and any customer-specific format. - Any special requirement: private-label labelling, a customer specification number, a deviation to be agreed, or a testing protocol the lot must pass. An enquiry with those six lines gets a quotation that can be compared line by line. An enquiry with only a product name gets a number that cannot. ## Samples and the trial A sample should come from the lot that will be supplied, not from a separate sample stock. Ask for the lot code, the COA for that lot and the pack date, and record the conditions the sample travelled in; a pouch that sat in a hot van for a week is not evidence about the material. Keep part of the sample sealed as a retained reference, so a later dispute can be settled against the powder that was actually trialled. Run the trial in the matrix you will sell. A dispersion test in water answers dispersibility; it does not answer whether a gummy's heat or a stick pack's film shortens the shelf life. The stability page sets out the tests that belong in that trial, and the retained-sample entry explains why the reference matters. ## What belongs in the order terms Put the specification revision on the purchase order, not only the product name, so a later revision cannot be applied silently. Name the pack, the lot or lots allocated, the document set and the remaining shelf life at delivery. Agree what counts as a deviation and how it is approved in writing, and set the window in which a quality claim can be raised after receipt, with the retained sample as the reference. Change control is the clause that protects both sides. A new oil supplier, a different carrier, a new dryer or a moved production site changes the material, even when the DHA result stays inside the range. The agreement should say that such a change is notified before shipment, not discovered on the COA. The COA page lists the lines to check on receipt, the MOQ entry and the lead-time entry define the two terms, and the quality page describes how lots and samples are retained. The catalog specification is on the algal DHA powder hub. ### 05 Where algal DHA is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/fatty-acids/algal-dha-powder/compliance/ Reviewed: 2026-11-19 Algal DHA is sold as a food-supplement ingredient in the EU, the US and the UK, but permission is route-specific. In the EU the oil is a novel food with a Union-list entry; in the US a dietary ingredient with a GRAS or notification history; the UK a retained framework and its own register. Each file has to show the route, the carrier, the allergen position and the claim boundary for that market. In one linePermission follows the oil's route into each market, and the file has to show that route, the carrier and the allergen position before the label is written. ## Four checks, not one An omega-3 ingredient is checked at four levels: the route that makes it lawful, the food category and use level, the contaminants, and the label and any claim on it. They fail on their own. A lot can sit inside every metal limit and still be on the wrong route; a route can be right while the label omits the source. “EU compliant” answers at most one of the four. ## The European Union Supplement rules begin with Directive 2002/46/EC, harmonising the vitamin and mineral forms and leaving other substances to national law. Above that sits Regulation (EU) 2015/2283 on novel foods: anything not eaten significantly in the EU before 15 May 1997 requires an authorisation; authorised items are listed in the Union list in Implementing Regulation (EU) 2017/2470. The list carries an entry for DHA-rich oil from Schizochytrium sp. and a separate one for oil from Ulkenia sp.; both carry conditions, including use in supplements and a maximum intake. Confirm the current entry, maximum and designation before the label is set. The entry authorises the oil, not the powder as a new material: a powder is that oil plus carriers, so entry, use level and carrier status have to line up. Modified starch may fall under the food-additive rules, where its permitted use and E-number need checking; either way it is declared. Labelling follows Regulation (EU) 1169/2011, and a supplement must state the amount of the substance with a nutritional effect in the product, so the DHA figure belongs on the label, not just the COA. ## The United States In the US the powder is a dietary supplement ingredient under DSHEA. Nothing is approved before it is marketed — there is no licence — so the framework is safety, GMP and labelling. The facility follows 21 CFR 111, the label 21 CFR 101, and the ingredient needs a lawful basis — a GRAS position or a new dietary ingredient notification, depending on its history. DHA-rich algal oil has a GRAS history, with notices filed for the oil; the dietary-ingredient route is usual for a supplement. GRAS status belongs to a substance, source and use, so the supplier should name the notice or notification it relies on. Algae is not a major allergen, but the carrier and any shared line still need checking: fish is, and a fish-free claim depends on the line, not only on the oil. ## The United Kingdom Great Britain applies retained food law: the novel-food Regulation as retained, the GB register kept by the FSA, the food-supplement regulations and the retained labelling and allergen rules. The EU Union list does not apply in GB, so an EU entry is evidence about the oil, not the GB authorisation; the register is what to check. Northern Ireland follows the EU regime, so a product sold across the UK can face two routes. The allergen list is retained in substance, so the fish entry and the starch-source question are the same as in the EU, and labelling follows the retained 1169/2011 rules, including the amount of the substance. GB needs its own route reference, and a label built only on EU paperwork is incomplete. ## Contaminants and the specification Catalog limits and the EU supplement ceilings at this review | Parameter | Specification limit | EU ceiling, supplements | Note | Lead | ≤3 mg/kg | 3.0 mg/kg | Regulation (EU) 2023/915 | Cadmium | ≤1 mg/kg | 1.0 mg/kg | Higher only for specified seaweed products | Mercury | ≤0.1 mg/kg | 0.10 mg/kg | Regulation (EU) 2023/915 | Arsenic | ≤2 mg/kg | No harmonised maximum | National or buyer limits apply | Moisture | ≤5.0% | Not a regulatory maximum | Quality parameter for the wall | PV and p-AV | ≤5.0 meq/kg and ≤20.0 | Not regulatory maxima | A lipid-quality parameter, not a contaminant | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Agreed in the specification | Agree the criteria with the buyer The ceilings apply to the supplement as sold, so the calculation runs on the finished formula. Peroxide and p-anisidine values are lipid-quality parameters, not contaminants; they belong in the specification and the stability file. ## Where the claim stops In the EU and the UK, Regulation 1924/2006 and its GB mirror set the claim rules. Claims must be authorised: the Annex has a nutrition claim for omega-3 fatty acids with a minimum per 100 g and per 100 kcal, and the DHA and EPA health claims carry a fixed wording and a minimum daily intake — 250 mg of DHA for the DHA claims at this review. A 10% powder delivers 100 mg DHA per gram, so the distance between that intake and the serving weight is arithmetic. In the US a structure/function statement is allowed for a supplement with the required disclaimer; a disease claim is not, unless it is an authorised qualified health claim. The supplier provides the specification and the numbers; the brand owns the wording. No disease-related claim belongs on a DHA specification, a COA or a label. ## What the buyer's file should contain Documents in an algal DHA supplement file | Document | What it establishes | Common gap | Specification | Source, grade, methods and limits | No source or carrier line | Batch COA | The lot passed its release tests | Results that repeat the range | Source and allergen statement | Algal oil, carrier, fish-free position | “Fish-free” claimed without a line check | Novel-food reference (EU/GB) | The entry the oil relies on | A generic algal-oil statement with no entry | GRAS or NDI reference (US) | The basis for the US safety position | GRAS cited for a different oil or use | SDS and stability report | Handling, storage and shelf life | A shelf life with no study | Contaminant and micro data | The lot is inside the agreed limits | Panels without methods or LOQs ## Before the file is signed off - Name the oil source and grade, and match both to the route for that market. - Confirm the DHA content and GC method on the specification. - Check the carrier: identity, source, and its status in the market. - Compare lead, cadmium, mercury, arsenic and the micro panel with the applicable limits. - Check the label: ingredient name, DHA amount, allergen statement and storage condition. - Keep the wording inside the authorised list and the applicable register. - Keep COA, specification, SDS, stability report and route reference in one file. - Re-check the route when the source, carrier, grade or market changes. The tests behind the file are on the COA page, the source comparison on the algal versus fish oil page and the allergen list in the Annex II glossary entry. The catalog specification is on the algal DHA powder hub. ### 06 How we prove an algal DHA lot is DHA URL: https://nutrition.rainwoodbio.com/products/fatty-acids/algal-dha-powder/identity/ Reviewed: 2026-11-19 A DHA lot is proved in four layers: the documentary chain, a GC run that identifies and quantifies the fatty acid, a spectrum that points to the source, and a mass balance covering carrier and oil load. A 10% assay shows DHA is present; it does not show that the oil is algal, that the carrier is as declared, or that the oil is fresh. In one lineA 10% DHA result says the fatty acid is present; the chromatogram, the fatty-acid spectrum, the carrier balance and the oxidation figures say what the powder is. ## Four layers, one material What each layer establishes, and what it leaves open | Layer | Evidence | What it establishes | What it leaves open | Documentary | Specification, COA, lot code, source statement | The pack is the lot described | Whether the chemistry is right | Chromatographic | GC-FID of methyl esters, DHA standard, chromatogram | The peak is DHA and the content is at the stated level | The source of the oil or the carrier | Compositional | DHA, EPA, DPA and the rest of the profile | The oil has the spectrum of an algal oil | The oil load or the oxidation state | Matrix | Carrier, mass balance, moisture, PV and p-AV | The powder is the grade ordered and not degraded | That the DHA is algal on its own Each layer can be genuine while another is wrong: a correct chromatogram can sit on an oxidised oil, a correct oil can be diluted with carrier, a correct powder can carry another lot's certificate. Identity is what the layers say together; the COA page carries the certificate lines. ## What the GC run has to show The standard method is gas chromatography of fatty acid methyl esters: the oil is extracted, transesterified, separated on a capillary column and measured by flame ionisation. DHA is assigned by retention time against a standard and quantified from an internal standard, giving grams per 100 g, or from peak area, giving the composition of the extracted oil. The certificate should name the column, programme and calculation. The extraction must recover the oil without changing it, and the recovery should be stated. The separation must resolve DHA from the neighbouring C22 fatty acids, or a shoulder inflates the peak. The result must say whether it refers to the powder or the extracted oil: on a 10% powder the denominators differ by a factor of four. A single peak is not a full identity: a blend can be built to produce it. The chromatogram is evidence when it shows the rest of the spectrum. ## The DHA, EPA and DPA spectrum Algal oil from Schizochytrium is DHA-dominant: EPA is a small fraction and DPA is measurable. Fish oil is a broader omega-3 mixture in which EPA usually carries a substantial share, it also contains long-chain monounsaturates such as C20:1 and C22:1, and a cholesterol fraction. The spectrum is a source fingerprint, not a purity measure. Spectrum markers that separate algal oil from fish oil | Marker | Algal DHA oil | Fish oil | Why it matters | DHA share | Dominant fatty acid | Substantial, alongside EPA | Explains the 10% basis | EPA | Small fraction | Usually a larger share | Source indicator | DPA | Measurable | Present, variable | Profile comparison | C20:1 and C22:1 | Low | Present | Marine-oil marker | Sterols | Algal pattern | Cholesterol-rich pattern | Confirms the source family A single marker can be added, but a profile that matches on DHA, EPA, DPA, the monounsaturates and the sterols is hard to fake at commercial scale. ## The carrier and the mass balance Modified starch is the wall, and the wall is most of a 10% powder, which makes the carrier part of identity: the right DHA figure with the wrong carrier is a different material for the label and the allergen file. The certificate should declare the carrier and its source; the specification should say whether the starch is maize, tapioca or wheat derived — wheat brings an allergen question the other two do not. The mass balance ties the layers together. DHA, the other fatty acids, the carrier, moisture and ash should account for the powder, and the oil load should fit the DHA figure and the oil's own assay. A 10% powder built on a 40% DHA oil is roughly a quarter oil; a much larger implied load needs explaining. ## XRD has no DHA to see XRD is not an identity method for algal DHA powder. DHA is an oil at room temperature with no crystal lattice; the powder's pattern comes from the carrier, not the fatty acid, so a diffractogram cannot show DHA, quantify it or separate algal from fish oil. GC-FID of the methyl esters, the fatty-acid profile and the sterols carry identity. XRD's use is physical: whether a spray-dried carrier is amorphous or partly crystalline, which affects flow and encapsulation, or whether a crystalline mineral excipient is present. Those are process questions, not identity lines. ## The routes that pass a DHA assay Adulteration routes for algal DHA powder and the test that gives it away | Route | What survives the assay | What exposes it | Fish oil substituted | A DHA result inside 10% | EPA, DPA, C20:1 and C22:1 profile; sterols | Lower DHA sold as 10% | Appearance and the grade name | Assay, mass balance, oil load | Oxidised oil | The DHA assay | PV and p-AV, TOTOX, odour | Undeclared carrier or dilution | A 10% result with no carrier line | Mass balance, moisture, microscopy | Ethyl ester or another lipid class | Total DHA by GC | Lipid class, glycerol or ethyl ester evidence DNA testing is not the answer: a refined oil holds little amplifiable DNA, so a negative fish-DNA result proves little; the fatty-acid and sterol profile carries the case and belongs in the specification. ## How to write the specification Write the full name and source: “Microencapsulated algal DHA powder 10%, oil from Schizochytrium sp., modified-starch carrier.” Then the analytical lines: “DHA ≥10.0% by GC (CAS 6217-54-5); EPA and DPA reported on the same run; oil load declared; carrier modified starch, source declared; free oil reported; moisture ≤5.0%; PV ≤5.0 meq/kg; p-AV ≤20.0; ≥95% through 40 mesh; heavy metals Pb ≤3, As ≤2, Cd ≤1, Hg ≤0.1 mg/kg; APC ≤1,000 cfu/g, yeast and mould ≤100 cfu/g, E. coli and Salmonella absent.” Add the negative statements the label depends on: “Not fish oil; no fish-derived carrier; no undeclared carrier.” Pair each with the test that catches it: the spectrum for fish oil, the mass balance for an undeclared carrier. The algal versus fish oil page takes the comparison further; the fish oil powder page shows the parallel specification. ## Five questions for the supplier - Which GC method and standard produced the DHA result, and is it on the powder or the extracted oil? - What are DHA, EPA, DPA and the rest of the profile on this lot, and can I see the chromatogram? - What is the oil load and the carrier, including starch source, and what is the free or surface oil? - What are the peroxide value, p-anisidine value and moisture on this lot, by which methods? - Which algal strain and oil supplier sit behind the lot, and what is the allergen statement? The catalog specification is on the algal DHA powder hub, storage behaviour is on the stability page, and evidence retention is on the quality page. ### 02.1 Algal DHA vs fish oil: source, allergens and the label URL: https://nutrition.rainwoodbio.com/products/fatty-acids/algal-dha-powder/grades/algal-vs-fish-oil/ Reviewed: 2026-11-19 Algal DHA and fish oil are both omega-3 oils, but they are different ingredients on a label: a different source, a different fatty-acid spectrum, a different allergen position and a different document file. The choice is made on the label and the market before it is made on the specification, because the source is what the label has to declare. In one lineAlgal DHA and fish oil can sit in the same capsule format and still be different label ingredients; the source decides the allergen, the ingredient name and the file. ## Two supply chains behind one powder format Algal DHA is produced by fermentation. A strain of Schizochytrium, often reclassified as Aurantiochytrium, is grown in closed tanks on a carbon source and nutrients, the biomass is harvested, and the oil is extracted and refined. The process is land-based and repeatable, and the oil's spectrum is set by the strain and the fermentation conditions rather than by a catch. Fish oil is rendered from landed fish, typically small pelagics such as anchovy, sardine or mackerel, and refined to remove free fatty acids, colour and odour. The species mix, the season and the fishery change the fatty-acid spectrum from lot to lot, and the refining is what brings the oil to a consistent specification. Both routes end in an oil that can be microencapsulated on a starch wall, so the powder format does not tell you which route was used — the source statement does. ## The spectrum the label has to reflect Algal oil is DHA-dominant with a small EPA fraction and a measurable DPA fraction. Fish oil is a broader mixture in which EPA usually carries a substantial share alongside DHA, and it also carries long-chain monounsaturates and a cholesterol fraction. That difference is why the two products are standardised differently: an algal powder is sold on a DHA figure, while a fish oil powder is commonly sold on an EPA plus DHA total. Fatty-acid and label markers, algal oil against fish oil | Marker | Algal DHA oil | Fish oil | Declared basis | DHA, by GC | EPA + DHA, by GC | EPA | Small fraction | Substantial share | DPA | Measurable | Present, variable | Sterols | Algal pattern | Cholesterol-rich pattern | Ingredient name | Algal oil (Schizochytrium sp.) | Fish oil A 10% figure therefore means different things on the two labels. On the algal powder it is DHA at 10%; on the fish powder it is EPA plus DHA at 10%, and the DHA share of that total comes from the lot's chromatogram. Anyone comparing the two on the percentage alone is comparing a fatty acid with a sum. ## The allergen question In the EU, fish and fish products sit in Annex II to Regulation 1169/2011, and the entry does not carve out refined fish oil; only fish gelatine used in specific applications is excepted. A fish oil powder therefore carries a fish declaration in the EU, whatever the refining has removed. The UK retains the same list, and Northern Ireland applies the EU rules. In the US, fish is a major food allergen under FALCPA. The US rules provide an exemption path for highly refined oils derived from a major allergen, and a fish oil can use it only if the documentation supports the claim; the exemption is a file that has to be proven, not a default. Algal oil contains no fish material and does not appear on the major-allergen list, but two other questions remain: the carrier, because a wheat-derived starch would bring wheat into the label, and the fermentation medium, which the supplier should describe. Allergen position by market, before an exemption is claimed | Market | Fish oil powder | Algal DHA powder | Label action | EU | Fish on Annex II | Not on Annex II | Declare fish and emphasise it; name the alga | US | Major allergen; refined-oil exemption only with a file | Not a major allergen | “Contains: fish” where fish oil is used | UK | Retained Annex II list | Not on the list | EU approach applies Vegetarian and vegan status follows from the source, with one qualification: the powder can be plant-derived while the capsule shell is gelatin. The carrier and the shell belong to the same label decision, and a “fish-free” claim needs a line check, not only an oil certificate. ## What changes on the label In the EU, a food supplement must state the amount of the substance with a nutritional or physiological effect in the product, so the DHA figure belongs on the label beside the ingredient name. The ingredient is named by its source — “algal oil (Schizochytrium sp.)” or “DHA-rich algal oil” — and a fish oil is named as fish oil, with the allergen emphasised in the ingredient list. A nutrition claim for omega-3 fatty acids has its own threshold per 100 g and per 100 kcal, and the authorised DHA and EPA claims carry their own conditions; the claim wording is the brand's responsibility, the numbers are the supplier's. On a US label the Supplement Facts panel carries the DHA figure in milligrams; DHA has no daily value, so the panel shows the quantity without a percentage. The fish allergen statement is separate from the ingredient list. The UK follows the retained labelling rules with the same structure. None of these label lines can be fixed by a certificate alone. The source, the carrier and the claim have to be decided together, because each one constrains the others. ## When to choose which Choose algal DHA when the label has to be fish-free, when the declared figure is DHA rather than a total, when the project wants a fermentation-based supply chain with a single strain behind it, or when a vegetarian or vegan positioning is part of the product. Choose fish oil when the label or the registration already names fish oil, when the declared basis is EPA plus DHA, when the EPA share matters to the formula, or when the format is an oil rather than a powder. A source switch is not a free change. Switch the source and the ingredient name, the allergen statement, the spectrum, the specification and possibly the market route all move; in an existing product it is a change-control event with a new label and new stability data. Decide the source before the label is designed, not after. ## How the source enters the specification Put the source in the product name and repeat it on the certificate: “Microencapsulated algal DHA powder 10%, oil from Schizochytrium sp., modified-starch carrier.” Add the DHA figure by GC, EPA and DPA on the same run, the oil load, the carrier and its source, moisture, peroxide and p-anisidine values, mesh, heavy metals and microbiology. Add the allergen statement and the negative line the label relies on: “No fish ingredient; no fish-derived carrier.” Then check that the negative line can be defended. The fatty-acid spectrum, the sterol pattern and the source statement are what make it credible; the identity page sets out those tests, the compliance page covers the market files, and the algal DHA powder hub carries the catalog specification. ### 01 What the COA for DHA powder actually contains URL: https://nutrition.rainwoodbio.com/products/fatty-acids/dha-powder/coa/ Reviewed: 2026-11-19 A DHA powder certificate reports an oil diluted into a carrier, not a neat fatty acid. It should show DHA by GC, the fatty-acid profile, moisture, peroxide and p-anisidine values, the carrier, the mesh and the contaminants. The catalog limits are DHA ≥10.0%, moisture ≤5.0%, peroxide value ≤5.0 meq/kg and p-anisidine value ≤20.0; the batch COA confirms one lot, not the next. In one lineA DHA certificate has to report the assay, the oxidation state and the carrier, because a 10% figure can pass while the oil behind it has aged. ## The certificate as a test report A certificate is auditable when every line names the analyte, the method and the release limit, and when the product name, CAS 6217-54-5 and lot code tie the sheet to the material. A sheet that prints the specification range in the result column has reprinted the gate, not reported a measurement. For a microencapsulated powder, two lines are easy to omit: the carrier and the oxidation pair. The carrier is part of the ingoing weight and may be an allergen source; peroxide and p-anisidine values describe the oil inside the matrix, which the DHA assay does not. Appearance matters too, because a colour shift can be the first visible sign that the oil has moved. Identity, assay and lipid limits · microencapsulated DHA powder 10% | Parameter | Method | Release limit | DHA | GC after methylation | ≥10.0% | EPA | Same fatty-acid run | Reported | Moisture | Gravimetric | ≤5.0% | Peroxide value | Titrimetric, e.g. ISO 3960 or AOCS Cd 8b-90 | ≤5.0 meq/kg | p-Anisidine value | Spectrophotometric, e.g. ISO 6885 or AOCS Cd 18-90 | ≤20.0 | Carrier | Composition declaration | Modified starch and antioxidant, declared | Particle size | Sieve analysis | ≥95% through 40 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent The method column is not decoration. GC measures fatty acid methyl esters, so the certificate should say the oil was methylated, which detector was used and how peaks were identified. Peroxide value counts hydroperoxides; p-anisidine value reacts with the aldehydes formed when they break down. One can fall while the other rises. The catalog limit fixes DHA; EPA is reported so the profile can be checked. ## What the 10% figure measures The catalog figure is DHA in the powder as sold, by GC. It is a concentration, not a purity: the rest is carrier, moisture, other fatty acids and the non-DHA part of the oil. A 10% powder can be a 25% oil load at 40% DHA in the oil, or a 40% load at 25% DHA. Both meet the assay; they are not the same material. That is why oil load or fat content belongs beside the assay. Without it the buyer cannot calculate how much carrier arrives per gram of DHA or check a label that declares the oil. The starch and antioxidant are not identified by the 10% figure. The basis also needs a definition. DHA can be expressed as free fatty acid, triglyceride or methyl ester, and the numbers are not interchangeable. The certificate should state the form and conversion, and the specification should use the same basis. Area percent from a chromatogram is a composition ratio, not a weight percentage of the powder. ## Release limit versus batch result The release limit is the boundary; the batch result is what the laboratory measured. Keep them in separate columns with the method beside each. A lot can pass all three limits with the peroxide value near the ceiling and still be a poor choice for a formula stored warm; the DHA figure would not show it. Moisture works the same way. At ≤5.0% the powder is inside the specification, but moisture near the ceiling shortens the distance to caking and hydrolysis. Encapsulation protects the oil from the outside; it does not remove water already inside the matrix. “Reported” is a requirement, not a blank. If EPA is reported, the figure and method should be there. If a heavy-metal panel says only “passes”, ask for the values and the limit of quantification. A conclusion is not a result. ## What moves between batches DHA is a natural oil fraction, so the assay moves with the oil batch and the source. The oil load set at the encapsulator moves with the emulsion and the dryer, and the DHA percentage follows both. A supplier change can move DHA, EPA and the minor fatty acids together. Peroxide and p-anisidine values move with heat, oxygen and time. Emulsification, spray drying and milling add exposure, and a clean lot can arrive higher if the pack is not a barrier. Mesh moves with the mill and sieve; colour with the oil and drying temperature. Compare a new lot with the previous one on the same lines, not only against the limits. Two lots can both pass and still change a capsule fill or a stick dose. That comparison is a specification review, not a rejection. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a disputed result or an unsupported claim. The useful panel is targeted: DHA and EPA by GC with a certified standard and the chromatogram; peroxide and p-anisidine values by a named method; moisture; the fatty-acid profile; source markers where substitution is suspected; and ICP-MS for heavy metals. Ask for the limit of quantification and the chromatogram. “Not detected” without a limit describes the method, not the sample. For a source claim, read the fatty-acid profile with the declared oil source; a DHA number alone does not separate fish oil from algal oil. ## What to compare between suppliers Two quotations that agree on 10% DHA can still describe different powders. Make the supplier fill six lines. Six lines that decide whether two DHA powder quotations describe the same material | Line | What to ask for | What it separates | Source | Oil source, producer and origin | Two materials with the same assay and a different label | Assay basis | DHA result, GC method, standard and expression basis | A measured lot from a copied range | Profile | EPA and the other fatty acids in the same run | A DHA concentrate from a blended oil | Oxidation | Peroxide and p-anisidine values on the lot | A fresh oil from an aged one | Carrier | Starch type, antioxidant and oil load | A declared matrix from an assumed one | Traceability | Lot code on certificate, pack and retained sample | A lot record from a generic sheet The catalog specification sits on the DHA powder product page. The powder-versus-oil decision is set out on the grade page; the tests that separate a DHA lot from a blended oil are on the identity page; the behaviour of the oil over time is on the stability page. The document terms are defined in the COA glossary entry, and the quality page explains how lots and retained samples are held. ### 02 DHA powder or DHA oil: choosing a grade URL: https://nutrition.rainwoodbio.com/products/fatty-acids/dha-powder/grades/ Reviewed: 2026-11-19 DHA powder and DHA oil carry the same fatty acid in different packages. The powder is an oil dispersed in a starch matrix and standardised to 10% DHA, so a dose weighs more; the oil is a concentrated liquid, so a dose weighs less. The choice is set by the dosage form, the dose per unit and the label, not by the DHA molecule. In one lineThe form decides how much material carries the dose and how much protection the oil has, while the DHA figure alone does not. ## Two forms, one fatty acid DHA is a long-chain fatty acid with six double bonds. In a powder it sits inside an oil droplet, and the droplet sits inside a starch matrix; in an oil it is the continuous liquid. The chemistry that oxidises is the same in both. What changes is the surface the oil exposes, the amount of non-DHA material that arrives with each gram, and the process the material can survive. The catalog grade is a microencapsulated powder at 10% DHA, 40 mesh, with modified starch and an antioxidant declared. A 20% powder is available on request and carries its own specification. The oil form is a separate material with a different DHA concentration and no carrier; it should not be ordered by asking for “the same thing as a liquid”. ## The comparison that matters The first number to compare is DHA per gram of material, because that number sets the fill weight. The second is the protection the form gives the oil, because that number sets the shelf life. The third is the label, because the carrier and the source belong on it. DHA powder and DHA oil compared on the lines that change a formula | Line | DHA powder 10% | DHA oil, concentrated | DHA per gram | About 100 mg | About 350–400 mg at 35–40% DHA | Material per 250 mg DHA | About 2.5 g | About 0.6–0.7 g | Physical form | Free-flowing powder, 40 mesh | Liquid at room temperature | Carrier | Modified starch and antioxidant | None; antioxidant may be added | Oil exposure | Encapsulated, lower surface area | Bulk liquid, larger surface area | Usual formats | Sticks, sachets, tablets, capsules, dry blends | Softgels, liquid capsules, emulsions | Label declaration | Powder, starch, antioxidant, source | Oil, antioxidant if used, source The oil figures are arithmetic for comparison, not a catalog grade. A concentrated oil at 40% DHA is a different raw material with its own peroxide value, p-anisidine value and source; ask for those before using the conversion in a formula. ## Flow, dispersion and fill The powder is dispersible, not soluble. In water it clouds the liquid and will settle unless the formula keeps it suspended; that is normal for an encapsulated oil, and a clear drink is the wrong target. The 40 mesh cut gives a powder that flows in a stick line and blends into a dry mix, but it is not dust-free, and the starch matrix takes up moisture when the seal is broken. The oil is easier to weigh into a softgel or an emulsion and harder to keep out of the air. It wets equipment, needs a nitrogen blanket or a closed transfer where the process allows, and can migrate into a capsule shell or a sachet seam. A powder spill is swept; an oil spill is a cleaning and an oxidation-exposure event. Capsule fill is the practical constraint. A 500 mg capsule cannot hold 2.5 g of powder, so a 250 mg DHA dose from the 10% grade means several capsules or a stick. The oil puts the same dose into one softgel. If the format is a capsule and the dose is high, the oil usually wins on fill weight; if the format is a dry stick or a tablet, the powder usually wins on handling. ## Dose, overage and the label Dose is a label decision, not a property of the raw material. Calculate from the assay: grams of powder = target DHA ÷ 0.10; grams of a 40% oil = target DHA ÷ 0.40. Use the lot result rather than the catalog minimum for the calculation, and add the manufacturing overage only after the process loss is measured. An overage declared as DHA on the label still has to be true at the end of shelf life. The label follows the form. A powder contributes its starch and antioxidant to the ingredient list; an oil contributes only the oil and any antioxidant. If the front of the pack carries a DHA amount, the back needs the nutrition declaration and the quantitative ingredient declaration that the market requires. The source — algal or fish — should be named, because the allergen statement and the regulatory route follow it. The catalog entry does not fix the source, so the specification has to. ## Writing the grade into the specification For the powder, write: “Microencapsulated DHA powder, 10% DHA (GC), [source] oil, carrier modified starch, antioxidant [name], ≥95% through 40 mesh.” Then add DHA ≥10.0%, EPA reported, moisture ≤5.0%, peroxide value ≤5.0 meq/kg, p-anisidine value ≤20.0, the heavy-metal and microbiology panels, and the allergen statement. State the assay basis and the oil load. For the oil, write the DHA concentration and the EPA figure, the triglyceride or ethyl-ester form, the source, the antioxidant, peroxide value, p-anisidine value, moisture and the contaminant panel. Do not carry the powder's starch line into an oil specification, and do not carry the oil's clarity expectation into a powder one. ## When the other form is the better fit Choose the powder when the format is dry, when the dose per unit is modest, when a tablet or a stick needs a free-flowing ingredient, or when the project wants the oil in a matrix that limits its exposure. Choose the oil when the dose per unit is high, when a softgel or a liquid capsule is the format, or when the carrier load cannot be accommodated in the serving size. Do not switch forms late as a sourcing decision. A switch changes the fill weight, the capsule size, the label, the allergen statement, the oxidation data and often the stability study. It is a reformulation, and it belongs in change control. The powder-versus-oil page works through the dose and label arithmetic; the COA page lists the tests that both forms need; the compliance page sets out the source and allergen file. The catalog specification is on the DHA powder hub, and the mesh and flow terms are defined in the particle-size glossary entry. ### 03 Microencapsulated DHA is protected, not immune; oxidation decides the shelf life URL: https://nutrition.rainwoodbio.com/products/fatty-acids/dha-powder/stability/ Reviewed: 2026-11-19 Microencapsulation slows oxidation; it does not stop it. The starch wall limits the oil's contact with air and light, but the oil inside still reacts with oxygen and moisture, and peroxide value and p-anisidine value are the figures that show it. The catalog limits are peroxide value ≤5.0 meq/kg and p-anisidine value ≤20.0, and a shelf life has to be demonstrated on the grade and the pack. In one lineThe wall slows the reaction; it does not stop it, so shelf life is set by the oxidation state of the oil and the barrier of the pack. ## The powder in its pack Sealed in a foil pouch or a lined drum, the powder is stable enough for commercial handling. The weak point is the seal and the headspace. Oxygen trapped in the pouch starts the reaction, and moisture that enters after opening raises the water content of the starch matrix. The catalog limit for moisture is ≤5.0%; a powder near that ceiling has less distance to caking and hydrolysis than one at 2%. Caking and loss of flow are the visible effects. Colour and odour are the chemical ones: a white to light yellow powder that darkens or develops a fishy, paint-like or cardboard note is showing oxidation that the DHA assay may not reflect. The assay measures the fatty acid, not its condition. Bring the pack to room temperature before opening so condensation does not form on the powder, and close it promptly after weighing. Temperature acts even in a sealed pack. Reaction rates roughly double for every 10 °C, so a drum stored against a warm wall ages faster than the same drum in a cool store. The storage condition belongs in the specification and on the label, not only in the warehouse procedure. ## In dispersion and in the formula The powder is dispersible, not soluble. In a stick or a drink mix it clouds the liquid and will settle unless the formula keeps it suspended. In a wet matrix the encapsulated oil is exposed to water, oxygen and often heat; high-shear mixing can whip air into the dispersion and raise the peroxide value. A nitrogen blanket, a deaerated process and a low-shear transfer reduce that exposure. Trace metals matter at low levels. Iron and copper catalyse lipid oxidation, so the water and the other ingredients should be checked as well as the powder. An acidic or alkaline pH accelerates hydrolysis of the oil, and a high water activity makes the starch wall plastic and more permeable. A cool, neutral, low-water-activity matrix is the easier environment. Antioxidants slow the change but do not reverse it. The powder already carries a declared antioxidant; adding another to an oxidised lot does not restore the peroxide value. The antioxidant has to be shown to work in the real matrix, not assumed from another product, and it has to appear on the label. ## What actually moves the result Stability factors · microencapsulated DHA powder | Factor | Effect | Control | Oxygen | Peroxide value rises; off-notes develop | Sealed pack, nitrogen headspace, low-shear handling | Moisture | Caking, hydrolysis, higher water activity | Foil laminate, sealed liner, desiccant, dry room | Heat | Faster oxidation and hydrolysis | Cool store, cool process, short heat exposure | Light | Photo-oxidation, colour drift | Opaque pack, foil or amber secondary | Iron and copper | Trace-metal catalysis | Specification limits, equipment check, ingredient screen | Mechanical shear | Wall damage, oil release, faster oxidation | Low-shear mixing, controlled conveying | Time | Slow change even in a good pack | Real-time data, retest or expiry date ## The stability protocol The bulk study keeps the powder in its commercial pack at 25 °C/60% RH and at 40 °C/75% RH, with pulls at the start and then at 3, 6, 12 and 24 months. The warm leg is an accelerated condition, not a storage instruction; it exists to make a trend appear inside the study window. Test DHA by GC, peroxide value, p-anisidine value, moisture, appearance and microbiology at each pull, and add the fatty-acid profile where the method allows it. Peroxide value is the early indicator, but read it with care. Hydroperoxides are intermediates: they rise, then decompose into aldehydes and other secondary products, so a peroxide value that falls late in the study can mean the oil has moved past the hydroperoxide stage rather than recovered. p-Anisidine value, colour, odour and the DHA figure tell the rest of the story. A specification that tracks only DHA and peroxide value can miss the secondary change. The finished-product study runs alongside, not instead. The capsule, tablet or stick goes into its own pack at 30 °C/65% RH and 40 °C/75% RH and is tested for DHA, peroxide value, p-anisidine value, moisture, colour and taste where it applies. Bulk powder can pass while the finished product fails, and the finished product is what carries the date. ## Formulation and packaging Capsules and tablets shield the powder from water and light; the remaining risks are the excipients and the process. A direct-compression blend with a hygroscopic carrier needs a dry room and controlled dwell time. A tablet coating adds a barrier but also adds heat, so the coating step belongs in the trial. Sticks depend on the seal. A foil laminate with a continuous seam and a low moisture-vapour transmission rate is the baseline; a clear or paper format is a marketing choice that needs its own data. Nitrogen flushing the headspace is worth asking for on a lipid powder, and the pack should be rigid enough that the powder does not abrade the seam in transit. A beverage is governed by pH, heat and dissolved oxygen. Add the powder at the coolest point that still disperses it, keep dissolved oxygen low, and check the peroxide value after the process rather than only on the raw material. In a drink mix the powder is consumed quickly once dispersed, but the stick still needs a moisture barrier for its own shelf life. ## How shelf life is assigned A shelf life is a conclusion from data on the grade and the pack, not a property of the chemical name. The specification should state the storage condition and the retest or expiry period the study supports. Bulk material that will be re-tested before use can carry a retest period; a consumer pack needs a date the shopper can read. Where the pack or the matrix has not been studied, the defensible answer is a shorter period or a new study. A 24-month figure borrowed from another pack proves nothing about this pouch, drum or stick. Ask for the study behind the number, the conditions, the parameters and the lots covered; a shelf life without that file is a guess with a date on it. The COA page lists the parameters that are followed over time. The packs and the ordering unit are on the MOQ page; the DHA powder hub carries the catalog specification; the grade page explains why the powder and the oil need separate studies. The quality page explains how stability data and retained samples are held. ### 04 DHA powder: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/fatty-acids/dha-powder/moq/ Reviewed: 2026-11-19 The minimum order is 1 kg, packed in a foil pouch, with a 25 kg fiber drum for larger quantities and a 1–7 day lead time from a released lot. One kilogram is enough for a bench trial, a label trial and a first stability pull, but it is a qualification unit, not a production run. The order is shaped by the pack, the documents and the destination as much as by the quantity. In one lineOne kilogram from a released lot is the qualification unit; the pack, the documents and the destination shape the order. ## Why 1 kg is the first unit A 1 kg pouch of 10% powder carries about 100 g of DHA. That is enough to run a formulation trial at a realistic dose, fill a small batch of capsules or sticks, and put a sample into a stability chamber. It is not enough to validate a production line or to cover a launch, and it is not meant to be: the first order is there to qualify the material before the quantity grows. The pouch is drawn from a released lot, so the batch COA describes the material in the sample. That link matters more than the pack size. A sample from a development batch, or a pouch filled from a different lot than the drum that follows, breaks the chain between the trial and the commercial supply. Ask for the lot code on the pouch, the certificate and the retained sample to match. The 25 kg drum is the next step. It covers a pilot run, a small commercial batch or a stability study with spare material. The drum is not simply 25 pouches: it has one lot and one certificate, and it should be opened and closed under a controlled procedure so the whole drum does not take up moisture at once. ## Packaging options Catalog packs · microencapsulated DHA powder 10% | Pack | Net weight | Typical use | Handling | Foil pouch, heat-sealed | 1 kg | Sample, bench trial, first stability pull | Reseal after opening; keep dry; use the whole pouch where possible | Fiber drum | 25 kg | Pilot batch, small commercial run | Open in a dry area; reseal between withdrawals; do not store open Both packs are barriers, not guarantees. A foil pouch protects the powder while the seal is intact; a drum protects it while the closure is sealed. Neither can protect a powder that is left open in a humid room. The storage condition in the specification applies to the pack as supplied, so transfer to a different container is a change the buyer owns. ## Lead time and what moves it The catalog pack is quoted at 1–7 days from a released lot. That window covers picking, the certificate, the export documents and the handover to the carrier; transit time is separate and depends on the destination and the service. Ask for the dispatch date rather than a delivery estimate if the trial date is fixed. Several things move the date: a request for 20% powder, an agglomerated grade, a custom mesh, a specification change, an extra test or a destination that needs a particular document. A change to the specification after the lot is released is a new release, not a paperwork update. Build the review time into the trial plan, especially for a first shipment into a regulated market. ## What a quotation needs A useful quotation is a short technical document, not a number in an email. Give the supplier these six items and ask for each one to be confirmed back. Six details that turn an enquiry into a comparable quotation | Detail | What to state | Why it changes the offer | Identity and source | DHA powder 10%, oil source, intended market | The source drives the allergen and the regulatory file | Specification | DHA, EPA, moisture, PV, p-AV, mesh, carrier and micro limits | The grade and the test panel decide the release | Quantity and pack | 1 kg pouch, 25 kg drum or both | The pack and the lot split decide the dispatch | Destination | Country, port or address, Incoterm | Documents, transit and responsibility change | Documents | COA, TDS, SDS, source and allergen statement, stability data | A missing document can hold the shipment | Deviations | Any tighter or additional test, and the acceptance limit | A non-catalog test is a new release condition ## Samples A sample is drawn from a released lot and ships with its certificate. State the amount needed and what it is for: a bench trial, a sensory trial, a stability pull or a customer's own approval. A bench trial and a stability pull need different amounts, and a stability pull needs enough material for every time point plus a retained portion. A sample is not a substitute for the specification. The sample shows how the powder flows and disperses; the specification and the COA show what the lot is. If the sample passes but the certificate is generic, the trial has qualified a powder that may not be the powder in the drum. Ask for the lot code and keep the retained sample. ## Order terms to settle before the PO Settle the commercial terms in writing: quantity and pack, Incoterm, payment terms, dispatch window, shelf life or retest date, document set and the change-control route. The specification, not the email thread, should be the document that the certificate is checked against, and the revision number should appear on both. The catalog limits and the tests are on the COA page; the documents a regulated market needs are on the compliance page; the pack's effect on shelf life is on the stability page. The ordering terms are defined in the MOQ glossary entry and the retained-sample entry, and the catalog specification sits on the DHA powder hub. ### 05 Where DHA powder is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/fatty-acids/dha-powder/compliance/ Reviewed: 2026-11-19 DHA is sold as a food supplement ingredient in the EU, the US and the UK, but the route and the file depend on the oil source and the form. The catalog entry fixes the powder, not the source; the specification must name whether the oil is algal or fish, because the allergen, the novel-food route and the label follow from that. The file also has to show contaminants, the claim boundary and the documents behind the lot. In one linePermission is not a property of the powder alone: the source, the market and the label each have to be shown in the file. ## Four checks, not one A DHA ingredient is checked at four levels: the ingredient route, the food category, the contaminants and the label with its claim. They fail independently. A lot can meet the heavy-metal limits and sit on the wrong source route; a route can be correct and the label omit a fish allergen. A supplier statement answers one of the four. The powder specification is the starting point, not the answer. The market file adds the source, the use level, the label and the claim to the catalog limits. ## The European Union Food supplements are governed by Directive 2002/46/EC, which harmonises the vitamin and mineral lists but leaves other substances, including fatty acids, to national rules and the general food law. On top sits the novel-food Regulation (EU) 2015/2283: a food not consumed significantly in the EU before 15 May 1997 needs an authorisation, and authorised novel foods appear in the Union list in Regulation (EU) 2017/2470 with their conditions of use. If the oil is algal, the DHA-rich oil from microalgae is the route to check: the Union list entry carries the conditions of use and label designation, and the supplier should point to the entry relied on. If the oil is fish, the novel-food question differs, but the source brings the allergen and contaminant file. Ask for the source statement before any “EU compliant” letter. Labelling follows Regulation (EU) 1169/2011: ingredient list, allergen emphasis, nutrition declaration and the quantitative ingredient declaration where a component is emphasised. Contaminants are governed by Regulation (EU) 2023/915 at this review; check the current text, because the levels and supplement entries are revised. ## The United States In the US, a DHA powder for supplements is a dietary ingredient under DSHEA. The FDA does not approve supplements or labels before marketing, so there is no pre-market licence. The framework is safety and labelling: the ingredient must be lawful, the facility follows the dietary-supplement GMPs in 21 CFR 111, and the label follows 21 CFR 101. A new dietary ingredient needs a notification at least 75 days before marketing unless its history of use removes that requirement. GRAS is a separate route, and a GRAS conclusion belongs to a specific substance, source and use, not to “DHA” in general. Keep the route reference. Fish is a major food allergen under FALCPA; an algal oil is not fish, but the carrier and antioxidant can introduce an allergen. Modified starch may come from corn, potato, tapioca or wheat, and wheat is a major allergen. The source statement should cover the oil, the starch and the antioxidant, not only DHA. ## The United Kingdom The UK applies a retained framework: supplements, labelling, contaminants and claims follow retained EU law as amended, enforced by the Food Standards Agency. Novel foods are on the GB register, and a supplier should identify the entry relied on. Northern Ireland applies the EU regime. The allergen list is the retained Annex II list, so fish and wheat matter as in the EU. The claims register is the GB register; wording authorised in the EU is not automatically authorised in GB. Check the register for the destination, not the source market. ## Contaminants and the specification Catalog limits for DHA powder and what the market file adds | Parameter | Catalog limit | File note | Lead | ≤3 mg/kg | Compare with the current EU or UK maximum and the customer's limit | Arsenic | ≤2 mg/kg | Speciation and the applicable limit depend on the market | Cadmium | ≤1 mg/kg | Check the current supplement entry | Mercury | ≤0.1 mg/kg | Relevant to a fish-oil source in particular | Peroxide value | ≤5.0 meq/kg | A lipid-quality limit, not a contaminant maximum | p-Anisidine value | ≤20.0 | Read with the peroxide value, not instead of it | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Confirm the customer's criteria and the method The catalog limits are release limits for the powder. The legal limit applies to the finished product, so run the calculation on the formula as well. A powder near the lead limit can fail in a product that adds another lead source. The COA page lists the tests. ## The claim boundary In the EU and the UK, health claims are governed by Regulation 1924/2006 and the applicable register. Only authorised claims may be used, with the wording, food category and intake condition of the entry. The register contains authorised claims for DHA; this page does not reproduce them, and a paraphrase is not a substitute. In the US, a structure/function claim is allowed with the required disclaimer. A disease claim is not allowed unless it is an authorised qualified health claim; otherwise it turns the product into a drug. The wording decides, and enforcement is on the finished label. The brand owns the claim. The boundary is the same in all three markets: describe what the material is and how it is tested; do not describe a disease, a disease-related use or a prevention. No disease-related claim belongs on a DHA specification, COA or label. ## The file a buyer should hold Documents behind a DHA powder food-supplement file | Document | What it proves | Common gap | Specification | Grade, source, limits and methods | No source, carrier or allergen line | Batch COA | The lot was released against the specification | Results copied from the range | Source and allergen statement | Algal or fish oil; starch and antioxidant sources | “Fish-free” claimed without a source statement | Novel-food or route reference (EU/UK) | Which entry the material relies on | Generic “EU compliant” letter | NDI or GRAS reference (US) | The safety route for the source and use | GRAS cited for a different source | Contaminant and micro data | The lot meets the agreed limits | Panel without methods or LOQs | Stability data and SDS | Storage, handling and shelf life | Shelf life with no study behind it ## The compliance checklist - Name the oil source and grade, and match them to the destination route. - Confirm the DHA content, the assay basis and the method on the specification. - Check the allergen statement against oil, starch and antioxidant. - Compare lead, arsenic, cadmium, mercury and microbiology with the limits. - Check the label designation, ingredient list, nutrition declaration and storage. - Keep the claim inside the register; no disease-related wording. - Hold COA, specification, SDS and stability data in one dated file. - Re-check the route when the source, grade or market changes. The route references are on the EU, US and UK regulatory pages. The allergen list is in the Annex II entry, the source decision is on the grade page, and the hub carries the catalog specification. ### 06 How we prove a DHA lot is DHA URL: https://nutrition.rainwoodbio.com/products/fatty-acids/dha-powder/identity/ Reviewed: 2026-11-19 Identity rests on four layers: the documents, the GC fatty-acid profile, the oil-to-carrier mass balance and the oxidation record. A DHA number alone can be produced by a blend; the chromatogram and the declared source are what make the number an identity. The catalog specification fixes DHA at ≥10.0% by GC, but the proof is the set of records that agree with it. In one lineA DHA number is a result; identity is the chromatogram, the oil load and the declared source agreeing with it. ## Four layers of identity Layer one is the paper: product name, source, CAS 6217-54-5, grade, specification revision and lot code. It is necessary and the easiest layer to copy. Layer two is the chromatogram: the fatty-acid methyl esters separated by GC, with DHA identified against a standard and the peak area integrated. Layer three is the mass balance: how much oil the powder actually contains, and how much is starch, moisture and antioxidant. Layer four is the condition of the oil: peroxide value, p-anisidine value, colour and odour. A lot can pass layer one and fail layer three. A powder at 10% DHA built on a low oil load carries more starch per gram of DHA than one built on a higher load; both meet the assay, but they are not the same material. A lot can also pass layers one and three and fail layer four, because a fresh-looking assay says nothing about the hydroperoxides already in the oil. The four identity layers and the failure each one catches | Layer | Evidence | What it catches | Document | Name, source, CAS, grade, lot code, specification revision | A generic certificate with no lot link | Chromatogram | GC fatty-acid profile, DHA and EPA peaks, standard and integration | A blend or a different oil under the same assay | Mass balance | Oil load or fat content, carrier, moisture, antioxidant | A diluted powder passing on a high-oil basis | Condition | Peroxide value, p-anisidine value, colour, odour | An oxidised oil behind a passing assay ## The DHA and EPA profile DHA is identified by retention time against a certified standard, not by the size of a peak. The certificate should say which standard, which column and which detector, and it should attach the chromatogram. A peak that co-elutes with DHA in one temperature programme can separate in another; the method belongs in the record. The profile around DHA is the second check. A fish oil usually carries a measurable EPA fraction and a sterol pattern that includes cholesterol; an algal oil can be high in DHA with little EPA and a different sterol pattern. Neither is a law, because blends and fractions exist, but the profile has to agree with the declared source. If the label says algal and the chromatogram looks like a fish oil, the source statement is the document to challenge first. The expression basis matters as much as the peak. DHA can be reported as free fatty acid, as triglyceride or as methyl ester, and area percent is not weight percent of the powder. A certificate that reports a DHA percentage without the basis has given a number that cannot be converted into a dose or compared with another supplier's number. The certificate should state the basis and the conversion. ## Why an X-ray scan is not the identity test here X-ray diffraction reads crystal lattices. The DHA in this powder is an oil, and the carrier is a modified starch that is largely amorphous, so there is no DHA lattice to diffract. An XRD pattern can show a crystalline phase — starch, a mineral or an inorganic adulterant — but it cannot confirm or quantify DHA. A clean pattern is not proof of identity, and crystalline peaks are not proof of adulteration. A rapid spectroscopic screen has the same limit. FTIR can show oil, starch and moisture, and it is useful for incoming comparison against a reference spectrum, but it does not replace the GC assay. Identity for this material is a separation method, because the analyte is one fatty acid among several in a mixture. ## The adulteration routes to test for The first route is oil substitution: fish oil sold as algal, or a different oil blended into a concentrate. The fatty-acid profile and the sterol pattern are the tools; a single DHA figure is not. The second is dilution: less oil in more carrier, with 10% DHA held by using a more concentrated oil. The mass balance catches it, which is why oil load belongs on the specification. The third is oxidation masking: an aged oil blended with fresh oil or dosed with antioxidant to bring the peroxide value under the limit. Peroxide value can look acceptable while p-anisidine value and colour show the history. The fourth is a form change: an ethyl-ester oil declared as a triglyceride, or the reverse. The label should name the form, and the analytical record should say whether the oil was transesterified before injection, because methylation erases the difference. The fifth is a carrier change. A different starch can alter the allergen statement, the flow and the fill weight without changing the DHA figure. The declared carrier and the source statement are part of identity, not packaging detail. The COA page lists the tests that make these routes visible. ## How to write identity into the specification Write the material as “Microencapsulated DHA powder, 10% DHA (GC), [source] oil, carrier modified starch, antioxidant [name], ≥95% through 40 mesh.” Add the DHA limit and method, the expression basis, EPA reported, the oil load or fat content, moisture, peroxide value, p-anisidine value, the heavy-metal and microbiology panels, and the allergen statement. Then add the records: lot code on the certificate, pack and retained sample; the chromatogram; the source statement; the carrier and antioxidant declaration; and the specification revision. A specification without the source and the oil load describes a grade, not a material. The grade page explains what changes when the form or the load changes, and the compliance page explains why the source has to be on the file. ## Five questions for a DHA supplier Five questions that turn a DHA quotation into an identity record | Question | Why it matters | What is the oil source, and is it algal or fish? | Sets the allergen, the regulatory route and the expected profile | What is the DHA result, the GC method and the expression basis? | Turns a percentage into a comparable, convertible figure | What are the EPA and the full fatty-acid profile? | Shows whether the oil matches the declared source | What are the oil load, carrier and antioxidant? | Exposes dilution and fixes the label and the fill weight | What are the peroxide and p-anisidine values, with the chromatogram and a retained sample? | Separates a fresh lot from an aged one and lets a third party repeat the work Ask the same five questions and compare the answers. The supplier that answers with a certificate, a chromatogram and a lot code is giving an identity record; the one that answers with a specification range is giving a grade. The DHA powder hub carries the catalog specification, and the COA glossary entry defines the document terms. ### 02.1 DHA powder vs DHA oil: dose, stability and the label URL: https://nutrition.rainwoodbio.com/products/fatty-acids/dha-powder/grades/dha-powder-vs-oil/ Reviewed: 2026-11-19 DHA powder and DHA oil deliver the same fatty acid at different concentrations. A 10% powder puts about 100 mg of DHA in every gram; a 40% oil puts about 400 mg in every gram, so the same dose needs roughly four times the powder weight. The choice turns on the dose per unit, the dosage form and the protection the oil needs, not on a difference in the molecule. In one lineThe dose sets the weight, the form sets the protection, and the label has to name both the material and its source. ## Two physical forms of one oil In the powder, the oil is dispersed in a modified starch matrix and dried to a free-flowing solid; the catalog grade is 10% DHA, 40 mesh, with an antioxidant declared. In the oil, the DHA is the liquid itself, usually as a triglyceride or an ethyl ester, with no carrier. Both forms can be made from algal or fish oil, and the catalog powder does not fix the source; the specification has to. The powder is dispersible, not soluble. It clouds water and settles unless the formula keeps it suspended, and it is not a clear-beverage ingredient. The oil is not dispersible in water without an emulsifier. Those are formulation facts, and they decide the format before the DHA percentage does. ## DHA per gram and the weight of a dose The conversion is simple arithmetic, but it is the step most often skipped in a brief. Divide the target dose by the DHA fraction of the material to get the grams of material per serving. Use the lot result, not the catalog minimum, when the label figure has to be met at the end of shelf life. DHA concentration and the material weight for two target doses | Material | DHA per gram | Material for 250 mg DHA | Material for 500 mg DHA | DHA powder 10% | About 100 mg | About 2.5 g | About 5.0 g | DHA powder 20%, on request | About 200 mg | About 1.25 g | About 2.5 g | DHA oil 40%, comparison | About 400 mg | About 0.63 g | About 1.25 g The 40% oil row is arithmetic for comparison, not a catalog grade. A concentrated oil has its own peroxide value, p-anisidine value, form and source, and those figures have to be checked before the conversion is used in a formula. The 20% powder is a request grade with its own specification, not a different scoop of the 10% material. ## What the dose does to the dosage form A capsule has a fill limit. A 500 mg capsule cannot hold 2.5 g of powder, so 250 mg of DHA from the 10% grade means several capsules or a stick; the same dose from a 40% oil fits in one softgel. A tablet is limited by the compression weight and the number of tablets per serving. A stick or a sachet is limited by the powder's flow and the sensory result, not by the fill weight in the same way. The dose also sets the carrier load. Five grams of 10% powder per serving brings the starch and the antioxidant that come with it; 1.25 g of oil brings almost none. If the serving is a single small capsule, that difference decides the form. If the serving is a stick, the powder's flow and dispersion may decide it instead. Overage is a separate decision. Add it only after the process loss is measured, and remember that an overage on the label still has to be true at the end of shelf life. The powder and the oil lose DHA at different rates because they are exposed differently, so an overage copied from one form does not transfer to the other. ## Protection, surface and shelf life The powder's advantage is the wall. The starch matrix limits the oil's contact with air and light and slows the rise in peroxide value; it does not stop the reaction, and it adds a moisture sensitivity of its own. The catalog limits are peroxide value ≤5.0 meq/kg, p-anisidine value ≤20.0 and moisture ≤5.0%, and those limits apply to the powder as sold. The oil's advantage is concentration and its disadvantage is exposure. A bulk liquid has a larger surface in contact with headspace, and every transfer adds air. Nitrogen, a closed transfer, an opaque pack and a cool store are the usual controls; the antioxidant has to be declared and has to be shown to work in the real pack. A softgel shell is a barrier, but it is not an oxygen barrier indefinitely. A shelf life belongs to the form and the pack, not to the DHA name. The powder study and the oil study are separate, with their own peroxide and p-anisidine trends and their own finished-product packs. A 24-month figure from a powder pouch is not evidence for a softgel, and the reverse is also true. ## What the label has to say The ingredient list follows the form. A powder contributes “microencapsulated DHA powder”, the modified starch and the antioxidant; an oil contributes the oil and any antioxidant, with no carrier. The source — algal or fish — should be named, because the allergen statement follows it; fish is a major allergen in the EU, the US and the UK, and an algal oil is not a fish ingredient but may still carry a starch or antioxidant allergen. The DHA figure belongs in the nutrition declaration where the market requires it, and a front-of-pack DHA claim needs the corresponding quantitative declaration on the back. If the source is emphasised, the quantitative ingredient declaration follows the same logic. A health claim has to come from the applicable register, at the authorised wording, category and intake condition; a US structure/function claim needs substantiation and the required disclaimer. The form does not create a claim that the rules do not allow. Two labels can carry the same DHA number and declare different ingredients. That is not a labelling trick; it is the form. Read the ingredient list, the allergen statement and the nutrition declaration together before comparing two products. ## When to choose which Choose the powder for dry formats: sticks, sachets, tablets, capsule blends and dry mixes, especially when the dose per unit is modest and the project wants the oil in a matrix. Choose the oil for softgels, liquid capsules and emulsions, especially when the dose per unit is high and the carrier load cannot fit the serving. A switch is a reformulation, not a substitution. It changes the fill weight, the capsule size, the ingredient list, the allergen statement, the oxidation data and often the stability study. Put the change through the specification and the label review before the first order. The grade page covers the wider grade decision, the COA page lists the tests both forms need, and the compliance page sets out the source and allergen file. The catalog powder is on the DHA powder hub, and the COA glossary entry defines the lot records behind the numbers. ### 01 What the COA for EPA powder actually contains URL: https://nutrition.rainwoodbio.com/products/fatty-acids/epa-powder/coa/ Reviewed: 2026-11-19 A certificate for microencapsulated EPA powder reports EPA by GC, the fatty-acid profile, moisture, peroxide value, p-anisidine value, the carrier, particle size, heavy metals and microbiology, each against a release limit. The limits are acceptance boundaries; the batch COA confirms the lot against them. In one lineAn EPA certificate has to show the fatty-acid profile, the oxidation figures and the carrier, not just a 10% assay. ## The certificate as a test report A certificate is useful when it can be audited line by line: method, release limit and the result the laboratory found. Identity, assay and release limits · microencapsulated EPA powder 10% | Parameter | Method | Release limit | EPA | GC, fatty acid methyl esters, internal standard | ≥10.0% | DHA | GC, same run | Reported; no catalog limit | Moisture | Gravimetric, loss on drying | ≤5.0% | Peroxide value | Titrimetric, ISO 3960 or AOCS Cd 8b-90 | ≤5.0 meq/kg | p-Anisidine value | Spectrophotometric, ISO 6885 or AOCS Cd 18-90 | ≤20.0 | Carrier | Declaration, specification and label | Modified starch and antioxidant, declared | Particle size | Sieve analysis | ≥95% through 40 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent GC is the assay method, and the certificate should name the detector, column, internal standard and integration basis. A percentage alone does not say whether it is area percent or calibrated mass, or whether it is calculated as free acid. Peroxide value is a titration and p-anisidine value a spectrophotometric measurement. The certificate should name the method—ISO 3960 or AOCS Cd 8b-90, ISO 6885 or AOCS Cd 18-90—because a value by one method is not directly comparable with a value by another. ## What the GC figure measures GC sees fatty acid methyl esters after the oil is extracted, transesterified and injected. The result is a fatty-acid mass fraction against an internal standard and response factors—not a measure of oil load, encapsulation efficiency or free oil on the particle surface. Two powders can both report 10% EPA and behave differently. A 20% EPA oil at a 50% oil load and a 30% EPA oil at a 33% oil load can both land near 10% on the powder; the first carries more oil per gram of EPA and less carrier per gram of powder. The second carries less oil and more carrier. Oil load is not part of the catalog EPA line, so ask for it separately. The basis is usually free acid, but the oil may be a triglyceride or an ethyl ester. Ten percent EPA as free acid is about 9.2% as ethyl ester. A certificate that does not state the basis cannot be compared with one that does. DHA needs the same run and basis, even though the limit is written on EPA alone. EPA and DHA are separate figures, not a single omega-3 total. A certificate that reports only “omega-3 10%” does not say how much is EPA; here the limit is EPA ≥10.0%, with DHA reported as part of the profile. ## Release limit versus batch result The release limit is the gate; the batch result is what the laboratory measured. They belong in separate columns, with the method beside them. A result column that repeats the range is a copy of the gate. The EPA limit is a floor, so passing lots can sit above it. For 100 mg EPA, 1,000 mg of a 10.0% powder delivers 100 mg, while 833 mg of a 12.0% powder delivers about 100 mg. Peroxide value measures hydroperoxides; p-anisidine value measures aldehydes. A lot can pass one and fail the other, so read both. The two limits allow a TOTOX of 30 if both sit at their ceilings (2 × 5.0 + 20.0); the catalog sets no TOTOX limit, so write one into the specification if the formula needs it. Heavy metals and microbiology are the same: “panel passed” is a conclusion; the individual results are the evidence. ## What moves between batches The oil is biological. Species, fishing ground and season move the fatty-acid profile, and concentration moves EPA and DHA again. A change of oil supplier can change the EPA/DHA ratio and the odour while the powder still meets 10% EPA. Carrier ratio and antioxidant change the oil load and the oxidation behaviour. Peroxide and p-anisidine values move with heat, oxygen and time. Emulsification, drying, milling and storage add exposure; a lot clean at the drier can arrive higher if the pouch is not a barrier. Moisture moves with drying and packing humidity; particle size with the mill and sieve. A COA is a lot document, not a product guarantee. The specification is the control; the COA is the evidence for one lot; stability data is the evidence for the shelf life. The stability page sets out how the three fit. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a narrow label claim, a disputed result, or a certificate that cannot be traced to a lot. The panel should answer what the certificate leaves open. Ask for GC of the fatty acid methyl esters with an internal standard, the chromatogram, the integration report and the calculation basis; AOAC 991.39 is written for encapsulated fish oils. Ask for peroxide and p-anisidine values by a named method on the same lot and calculate TOTOX. Add ICP-MS, microbiology, and dioxins and PCBs where the oil is fish-derived and the market requires them. Where an allergen claim depends on protein absence, ask for the protein test, not an assumption. Ask for the limit of quantification, recovery and chromatogram. A “not detected” line without a limit describes the method, not the sample. ## What to compare between suppliers Two quotations that match on 10% EPA and diverge on the other five are not describing the same powder. Six lines that decide whether two EPA powder quotations describe the same material | Line | What to ask for | What it separates | Standardised figure | EPA result, GC basis (free acid or ethyl ester), DHA result | A 10% EPA powder from a 10% EPA+DHA powder | Oil load | Oil content and the oil’s EPA content | Two powders at 10% with different carrier mass | Oxidation | PV, p-AV and TOTOX on the same lot | A fresh powder from an aged one | Carrier | Modified starch type, antioxidant, declaration | Two labels and two stability profiles | Physical | Mesh, moisture, bulk density, flow | A capsule fill from a stick fill | Source | Oil source, allergen statement, lot code | A fish-derived lot from an algal one The lot code should be identical on the certificate, the pack and the retained sample, and the certificate should name the manufacturer and the oil source. A certificate that cannot be tied to the drum describes a powder, not the powder that will arrive. The catalog specification sits on the EPA powder product page. The grade choice is on the grade page; identity tests are on the identity page; the ICP-MS panel is in the method note; certificate terms are in the COA glossary entry. ### 02 EPA powder or fish oil powder: choosing an omega-3 grade URL: https://nutrition.rainwoodbio.com/products/fatty-acids/epa-powder/grades/ Reviewed: 2026-11-19 Both powders carry a 10% number, but the number is standardised on different things. Microencapsulated EPA powder is released on EPA alone at ≥10.0% by GC; fish oil powder is released on EPA + DHA at ≥10.0%, with EPA and DHA reported separately. Switching changes the EPA per gram, the DHA on the label, the allergen statement and the fill weight. In one lineEPA powder and fish oil powder can both say 10% and still deliver different amounts of EPA; the specification has to say which figure is standardised. ## Why there is more than one omega-3 grade Fish oil powder is a whole oil—triglycerides with a natural fatty-acid spread—standardised on the sum of EPA and DHA. EPA powder is an oil standardised on one fatty acid, carried on a starch matrix. Both are microencapsulated, both declare modified starch and antioxidant, and both meet 40 mesh and the same peroxide and p-anisidine limits. The difference is the specification basis, not the powder form. A 10% EPA+DHA powder cannot guarantee 10% EPA; EPA is a fraction of the total, and that fraction comes from the profile. A 10% EPA powder guarantees the EPA floor but leaves DHA to the profile. The label has to say which figure it means, and the certificate has to report the figures on the same basis. ## EPA powder and fish oil powder side by side What changes between a 10% EPA powder and a 10% fish oil powder | Line | EPA powder | Fish oil powder | Standardised figure | EPA ≥10.0% by GC | EPA + DHA ≥10.0% by GC | EPA per 1,000 mg | ≥100 mg | Profile-dependent; below the total | DHA | Reported, not limited | Reported, part of the total | Label ingredient | Microencapsulated EPA powder | Microencapsulated fish oil powder | Source and allergen | Source declared; fish allergen if fish-derived | Fish source; fish allergen statement | Oxidation limits | PV ≤5.0 meq/kg; p-AV ≤20.0 | PV ≤5.0 meq/kg; p-AV ≤20.0 | Carrier and mesh | Modified starch and antioxidant; 40 mesh | Modified starch and antioxidant; 40 mesh | Typical fit | EPA-led capsule or stick | EPA+DHA or fish-oil-led label Read the table down, not across. The EPA line decides the powder weight for an EPA claim; the DHA line decides whether the label can name DHA; the source line decides the allergen; the carrier line decides the ingredient list and the fill. Two powders that match on the 10% line and diverge on the other seven are different ingredients. ## What the powder does on the line Both are dispersible, not soluble: the oil sits in a starch matrix, so the powder clouds water rather than dissolving. Both are specified at ≥95% through 40 mesh, which is about 425 µm, so sieve size alone does not separate them. Bulk density, flow, oil load, free oil and odour are not in the catalog line; ask for them on the grade you will fill. A capsule and a stick ask different things of the same mesh. Microencapsulation is a barrier, not a taste-masking guarantee. The wall slows oxygen and moisture ingress, but the oil is still an oil. Trial the grade in the finished base—capsule, stick or beverage—before the label is fixed. The stability page explains what the wall does and does not protect. ## Matching the grade to a label dose Start from the label figure, not the powder weight. For 100 mg EPA, a 10% EPA powder needs 1,000 mg; a 10% EPA+DHA powder depends on the EPA share of the total: if EPA is 60% of the declared total, 100 mg EPA needs 1,667 mg. For 100 mg DHA, a 10% DHA powder needs 1,000 mg. Capsules have a fill ceiling. A 1,000 mg powder fill is already large, and 1,667 mg is usually a stick, not a capsule. A gram-for-gram switch can underdeliver the label or overflow the fill. Use the lot result rather than the catalog minimum, and add an overage only with stability data behind it. ## How to write the grade specification Write the grade as a full identity. EPA powder: “Microencapsulated EPA powder, ≥10.0% EPA by GC, basis stated as free acid or ethyl ester, DHA reported, moisture ≤5.0%, peroxide value ≤5.0 meq/kg, p-anisidine value ≤20.0, carrier modified starch and antioxidant declared, ≥95% through 40 mesh, heavy metals and microbiology as listed, source and allergen statement attached.” Fish oil powder: “Microencapsulated fish oil powder, ≥10.0% EPA+DHA by GC, EPA and DHA reported separately, the same physical and oxidation lines, fish source and allergen statement attached.” A specification that says only “10%” is ambiguous. The method and the basis are part of the grade, not a footnote. ## When a different grade is the wrong answer If the label is built on total omega-3 or on fish oil as the ingredient name, an EPA powder may not carry the ingredient list. If the label is built on EPA with a low DHA figure, a fish oil powder may need too much powder per dose. If the claim is fish-free, neither fish-derived powder fits; an algal source is a different specification and a different regulatory route. If the formula needs a clear solution, neither grade delivers it. The catalog specification is on the EPA powder product page, and the fish oil powder is on its own product page. The EPA-versus-DHA arithmetic is on the EPA vs DHA page; the certificate lines are on the COA page. ### 03 Microencapsulated EPA is protected, not immune; oxidation decides the shelf life URL: https://nutrition.rainwoodbio.com/products/fatty-acids/epa-powder/stability/ Reviewed: 2026-11-19 Microencapsulation puts a starch wall between the oil and the air, slowing oxygen and moisture ingress and keeping the powder free-flowing. It does not stop oxidation. The oil inside the wall still reacts with oxygen that passes through the matrix, and peroxide and p-anisidine values—not the EPA assay alone—decide how long the powder keeps its specification. In one lineThe wall protects the oil from the plant, not from time; peroxide and p-anisidine values set the shelf life. ## The dry powder is not a sealed system The matrix is hygroscopic. The moisture limit is ≤5.0%, but water activity is not in the catalog line and is the better predictor of caking and of oil mobility. At high humidity the wall plasticises, free oil can rise and oxidation accelerates. Oxygen also enters from the headspace and through the pouch; a foil laminate slows it, it does not eliminate it. Temperature raises the rate of both hydroperoxide and aldehyde formation. A cool, dry, dark store is the baseline; the exact range belongs on the TDS. The EPA assay is a poor early warning. It can stay above 10% while PV and p-AV climb; the oil is still inside the fatty-acid limit but no longer fresh. Read the oxidation lines as the shelf-life lines. ## What changes when the powder is dispersed The powder is dispersible, not soluble. In water the starch hydrates, the wall softens and the oil becomes more exposed. A reconstituted drink is a short-held intermediate, not a shelf-stable solution: its hold time, heat load and headspace matter, and the powder’s shelf life does not transfer to it. In a capsule or tablet the powder is shielded from water but not from oxygen; the shell and the blister are part of the barrier. In a stick, the finished pack’s moisture and headspace matter as much as the bulk pouch. A beverage base with a long hold time needs its own trial, not an assumption borrowed from the powder. ## What drives oxidation Factors that move peroxide and p-anisidine values in a microencapsulated EPA powder | Factor | What it does | What to control | Temperature | Raises the rate of hydroperoxide and aldehyde formation | Cool store; stability data at the market temperature | Oxygen | Feeds primary oxidation in the oil and headspace | Barrier pouch; confirm headspace flush | Light | Photo-oxidation at the oil surface | Opaque or light-blocking pack | Moisture | Plasticises the wall, raises free oil and promotes caking | ≤5.0% moisture; measure water activity | Carrier and matrix | Sets oil load, free oil and oxygen path | Declared carrier; oil load on the specification | Antioxidant | Slows oxidation; does not stop it | Type and level declared; verify on stability | Metal ions | Catalyse lipid oxidation at trace levels | Check the formula for iron and copper | Packaging | Sets the oxygen and moisture barrier | Foil pouch, drum liner, sealed pack | Time | Ages every lot, even in a good pack | Assigned shelf life and retest date No single row decides the rate. A warm warehouse, a permeable pack and a high free-oil surface can fail a lot that would pass in a cool, sealed drum. The stability protocol has to test the combination, not one factor at a time. ## A stability protocol for this powder A stability programme answers two questions: does the lot stay inside the EPA, PV and p-AV limits, and does the powder stay free-flowing and clean? Use the pack you will sell. A standard accelerated condition is 40 ± 2 °C and 75 ± 5% RH, tested at 0, 1, 2, 3 and 6 months; a real-time condition is 25 ± 2 °C and 60 ± 5% RH, or 30 °C/65% RH for a hot market, tested to the intended shelf life. The conditions have to match the market and the pack. At each point test EPA and DHA by GC, PV, p-AV, TOTOX, moisture, water activity, appearance and odour, microbiology and particle size or caking. A single lot is a screening study; a shelf-life claim needs more than one lot and a real-time arm. Accelerated data supports a tentative shelf life; real-time data confirms it. The release COA gives the starting point, not the shelf life. A lot can be released at a low PV and fail at month six; the study, not the release value, sets the date. The COA page sets out the release lines the study starts from. ## The formula is part of the stability equation A capsule, a stick and a beverage expose the powder differently: water activity, headspace oxygen, heat during filling and the other actives all matter. An acidic or mineral-containing formula can change the local environment; iron and copper ions catalyse lipid oxidation, so check the formula for them. An EPA overage is not an oxidation fix. An overage keeps the assay above the label for longer, but the oil still oxidises and the PV and p-AV limits still apply. Use an overage only when the stability data supports it, and set oxidation limits for the finished product as well as the powder. The antioxidant is declared for a reason; its type and level belong in the specification. It slows oxidation; it does not replace a barrier pack or a cool store. ## How shelf life is assigned Shelf life is assigned from data for the grade, the pack and the market. The catalog does not carry one shelf life for every destination. Ask for the assigned shelf life, the remaining shelf life at delivery, the storage conditions and the retest date; a retest is not a new shelf life unless the data supports it. Packaging is a 1 kg foil pouch and a 25 kg fiber drum; confirm the laminate, the liner and whether the headspace is flushed. If the powder is repacked, the new pack needs its own stability data and label. Store cool, dry and dark, and keep the pack closed; an opened pouch is a different system from the one that was tested. The MOQ page covers pack sizes and ordering; the identity page covers the tests that show the oil inside the wall is still EPA; the microbiology method note covers the plate-count side of the stability panel. ### 04 EPA powder: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/fatty-acids/epa-powder/moq/ Reviewed: 2026-11-19 The minimum order is 1 kg, packed as a 1 kg foil pouch; production volumes ship in 25 kg fiber drums. The catalog lead time is 1–7 days. A quotation needs six things: the specification, the quantity and pack, the destination and Incoterms, the documents, the shelf life and testing requirement, and the label or delivery detail. In one lineOne kilogram is the smallest unit that still carries a lot identity: a pack, a COA and a retained sample that match. ## Why the minimum is 1 kg One kilogram is the smallest unit that still carries a lot identity. It is drawn from a released lot, with a COA and a retained sample that match; a smaller repack would either lose that link or require a new lot. The minimum is a pack, not a favour. The unit is also the qualification size: enough for a trial fill, a capsule run or a stick batch, and small enough to test the matrix before a 25 kg order. If the trial and the production order are placed together, ask for both from the same lot. A sample from a different lot does not qualify the production powder. Order size and lot size are different things. A 1 kg pouch and a 25 kg drum can come from the same released lot if the lot is large enough and the packs are allocated together. If the trial must match the production run, say so before the lot is allocated; a later request cannot reopen a lot that has been used up. ## Pack sizes and what they change Packs for EPA powder and the points to confirm on each | Pack | Typical use | What to confirm | 1 kg foil pouch | Trial, small batch, sample retention | Laminate, reseal, lot label, net weight | 25 kg fiber drum | Production run | Food-grade liner, liner integrity, net weight | Lot label | Traceability | Product, lot code, net weight, storage, allergen | Inner liner | Moisture and oxygen barrier | Food-grade, intact, compatible with the powder | Headspace | Oxidation control | Ask whether the pack is flushed; the catalog does not state it | Repack | Buyer’s own pack | New stability data, new label, original lot traceability The pack is part of the specification. A foil pouch and a fiber drum are different barriers, and a repack is a third system. If the powder will be held for a long period, confirm the barrier and the headspace rather than assuming the bulk pack is enough. ## Lead time and what starts it The catalog lead time is 1–7 days. Confirm the start point in the quotation—order confirmation and specification sign-off are the usual triggers—and do not count the first email. A new specification, a new carrier or a new pack can add a production step; do not assume the catalog time applies. Documents may take longer than the powder, and destination clearance is outside the lead time. Ask for the ship date and the Incoterms, not just the lead time; the Incoterms decide when risk and transport responsibility transfer. ## The six details a quotation needs Six details make two quotations comparable. What to put in a quotation request for EPA powder | Detail | What to state | Why it changes the quote | Specification | EPA and DHA basis, carrier, antioxidant, mesh, source, allergen | Sets the grade and the test panel | Quantity and pack | 1 kg or 25 kg, number of packs, one lot or split | Sets the pack and the lot allocation | Destination and Incoterms | Country, city or port, Incoterms 2020, consignee | Sets the transport and document route | Documents | COA, TDS, SDS, allergen and source statement, language | Sets the file that ships with the lot | Shelf life and testing | Remaining shelf life at delivery, third-party tests, dioxins and PCBs | Sets the lot age and the outside panel | Label and timing | Label text, artwork responsibility, required delivery date | Sets the pack label and the schedule A quotation that answers only the product name and the quantity is not comparable. Ask for the specification version and the lot allocation in writing. ## Samples and qualification A sample should be a pack from a released lot with the lot code and COA. A sample without a lot code cannot be compared with the production lot, and a “representative sample” is not traceable. Trial the sample in the finished base: appearance, odour, dispersion, fill, and the oxidation values from its COA. Keep the sealed sample as the reference against the first production lot. Sample quantity and whether it is free are agreed in the quotation; do not assume either. Keep the sample COA with the sample. When the first production lot arrives, compare its COA with the sample COA on EPA, DHA, PV, p-AV and moisture, and run the same dispersion trial. A match on the assay alone does not prove the two packs behave the same in the matrix. ## Terms to agree before the order Attach the specification version to the purchase order. Agree the source, carrier, antioxidant, allergen statement, shelf life at delivery, pack, quantity tolerance, change control and document language in the order, not after it. Payment terms and Incoterms are agreed in the quotation. A change of oil source, carrier or antioxidant is a specification change: require a new COA and, where the change can move oxidation or the label, a new stability study. Agree how long the retained sample is kept; the retained-sample glossary entry explains why it matters. The catalog specification is on the EPA powder product page; the certificate lines are on the COA page; the market file is on the compliance page. Lead time and MOQ terms are in the lead-time and MOQ glossary entries. ### 05 Where EPA powder is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/fatty-acids/epa-powder/compliance/ Reviewed: 2026-11-19 EPA powder is sold as an ingredient for food-supplement manufacture, not as a finished supplement. In the EU, EPA is an “other substance” outside the harmonised vitamin and mineral lists, so national rules can apply; in the US, it is a dietary ingredient and the carrier must be permitted for food use; in the UK, the assimilated food-supplement framework applies. Each market asks the same five questions in a different order. In one linePermission, contaminant limits, allergen wording and claims are four separate checks, and the file has to answer all four for each market. ## Three markets, three questions The product is an ingredient; the brand owner is responsible for the finished supplement and its label; the supplier provides the file. The first fact is the source. A fish-derived oil brings a fish allergen statement and the dioxin and PCB question. An algal oil avoids the fish allergen but brings a novel-food or dietary-ingredient history that has to be checked. The catalog entry sets the EPA content, not a fixed source line; the specification has to name the source, and a fish-derived COA cannot be used for an algal lot. Permission in one market does not carry to another. The same powder can need a different file next door. ## European Union: an “other substance” Directive 2002/46/EC harmonises vitamins and minerals. EPA is an “other substance” under Regulation (EC) 1925/2006, and national provisions can apply where the EU has not harmonised the detail. There is no single EU positive list for EPA; check the member state where the supplement is sold. Fish-derived EPA has a history of use in food supplements. An algal EPA/DHA oil is a novel food with source-specific authorisation conditions; check the entry before assuming the fish route applies. The carrier and antioxidant also need a permitted use in the food category. The final supplement must comply with the contaminant limits; the ingredient specification has to leave room for the dose. In the UK, the Food Supplements (England) Regulations 2003 and their devolved equivalents apply, with assimilated contaminant and labelling rules. Check the current GB text, and check Northern Ireland separately; it follows a different food-law framework. As of this review, contaminants sit in Regulation (EU) 2023/915. The food-supplement limits for lead, cadmium and mercury are in the table below; arsenic has no harmonised EU maximum, so the 2 mg/kg line is a specification choice. Dioxins and PCBs are a separate entry for fish and fish products and are not in the catalog panel; request the data for a fish-derived lot. Labelling follows Regulation (EU) 1169/2011, with fish in Annex II. ## United States: dietary ingredient and label Under DSHEA, fish oil is a dietary ingredient with a pre-1994 history; an isolated EPA or a new source can need a different analysis. A new carrier raises a separate food-additive question. The carrier must be permitted: modified starch used as a food additive is covered by 21 CFR 172.892, and the antioxidant must have a permitted use. The supplement manufacturer operates under the 21 CFR 111 cGMPs; the ingredient COA supports incoming-material testing. Fish is a major allergen under FALCPA. A highly refined oil can be exempt only through a FALCPA exemption, normally a notification with the evidence behind it; a microencapsulated powder with a carrier should not be assumed exempt. Label the fish source unless the exemption is documented. Structure/function claims need the DSHEA disclaimer; disease claims are not allowed. FDA does not pre-approve a supplement or its claims. There are no federal heavy-metal limits specific to supplements; USP <2232> is voluntary, and state law such as Proposition 65 can add a lead warning. ## Contaminants, moisture and oxidation Catalog limits and the market note behind each line | Parameter | Catalog limit | Market note | Lead | ≤3 mg/kg | EU 3.0 mg/kg for food supplements; no US federal limit; UK assimilated rules | Arsenic | ≤2 mg/kg | No harmonised EU maximum; no US federal limit; specification choice | Cadmium | ≤1 mg/kg | EU 1.0 mg/kg for food supplements; no US federal limit | Mercury | ≤0.1 mg/kg | EU 0.10 mg/kg for food supplements; no US federal limit | Dioxins and PCBs | Not in the catalog panel | EU limits for fish and fish products; request lot data | Microbiology | APC ≤1,000; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | EU hygiene rules; US cGMP | Moisture | ≤5.0% | Specification line; no harmonised limit | Peroxide value | ≤5.0 meq/kg | Specification line; sector monographs | p-Anisidine value | ≤20.0 | Specification line; sector monographs The table separates the catalog panel from the legal limit. The EU metal limits apply to the supplement as sold; the ingredient has to leave room for the dose. The arsenic line is a specification choice, not an EU limit. Dioxins and PCBs are the gap a fish-oil buyer should close before the first shipment. ## What the label may say Claims are a separate review from permission and contaminants. In the EU, Regulation (EC) 1924/2006 allows only authorised claims, each with its own wording and conditions; the register has entries for EPA and DHA, and this page does not reproduce them. In the US, a structure/function claim needs the DSHEA disclaimer, and a disease claim is not allowed. In the UK, the assimilated claim rules apply; check the GB register. The label can describe the ingredient and the amount. It cannot describe a disease outcome. A 10% powder does not authorise a claim by itself; the finished product, the dose and the wording do. Review the claim before the artwork, not after. ## The file behind a lot Documents a supplement brand owner should hold for an EPA powder lot | Document | What it shows | COA | EPA, DHA, moisture, PV, p-AV, metals, microbiology, lot code | TDS | Specification, pack, storage, shelf life, applications | SDS | Hazard and handling information | Allergen and source statement | Fish or algal source; fish allergen position | Composition declaration | Carrier, antioxidant, oil load where agreed | Contaminant package | Metals, microbiology, dioxins and PCBs where requested | Regulatory statement | EU, US or UK route; permitted use for the carrier | GC chromatogram | Fatty-acid profile and integration, on request | Retained sample record | Lot code and retention period The file is evidence, not a certificate of free sale. Keep the lot code and the specification version on every document. ## Buyer’s checklist - Source named and consistent across COA, label and allergen statement. - EPA and DHA results by GC, with the free-acid or ethyl-ester basis stated. - PV, p-AV and calculated TOTOX on the same lot. - Individual metal results with methods, not a “panel passed” line. - Microbiology with sample weight, method and limits. - Carrier and antioxidant permitted for the market and declared. - Fish allergen statement; refined-oil exemption evidence only if claimed. - Dioxins and PCBs for a fish-derived lot in the EU or UK. - Label and claims checked against the current market register. The catalog specification is on the EPA powder product page. The certificate is explained on the COA page, the allergen line on the identity page, and the order file on the MOQ page. Market notes are maintained in the EU, US and UK regulatory references, with the fish entry in the Annex II glossary note. ### 06 How we prove an EPA lot is EPA URL: https://nutrition.rainwoodbio.com/products/fatty-acids/epa-powder/identity/ Reviewed: 2026-11-19 An EPA lot is identified by a chain of evidence, not by one assay. The chain starts with the declared source and specification, runs through a GC fatty-acid profile with a named standard and internal standard, checks the EPA/DHA ratio and the other fatty acids against the declared oil, and ends with the carrier and oxidation figures on the powder. A lot can pass 10% and still be diluted, substituted or oxidised. In one lineA 10% assay is a number, not an identity; the profile, the ratio and the matrix have to agree before the lot is EPA powder. ## Four layers of identity The layers are independent; a pass at one does not cover the next. A certificate can be genuine and the powder still not be the declared grade. The four identity layers for a microencapsulated EPA powder | Layer | Question | Evidence | Document | What is the lot declared to be? | Name, CAS, source, specification version, label | Chromatography | Is EPA present at the declared level? | GC-FAME, retention time, internal standard, calibration | Profile | Is the fatty-acid background consistent? | EPA/DHA ratio, C16:0, C18:1, C18:2, other peaks | Matrix | Is the powder what the label says? | Carrier, oil load, moisture, PV, p-AV, microbiology The document layer names EPA, CAS 10417-94-4, the source and the specification version; it is the easiest to copy and the least informative on its own. The chromatographic layer proves that EPA is there; the profile layer says whether the oil around it is the oil that was declared; the matrix layer says whether the powder carries the oil at the stated load. ## The EPA/DHA ratio is a fingerprint The EPA/DHA ratio is a fingerprint, not a purity metric. A fish oil has a characteristic spread; a high-EPA concentrate has a different one; an algal oil is often DHA-rich. The ratio should be calculated from results on the same basis. Comparing an EPA result as free acid with a DHA result as ethyl ester is meaningless, and a certificate that does not state the basis cannot support a ratio. Other fatty acids carry information: C16:0, C18:0, C18:1, C18:2 and C20:1. A profile with a large C18:2 peak and little EPA or DHA is not a marine oil. A profile that matches the declared oil is consistency, not proof; a blend can be adjusted to hit a ratio. The certificate should report the full FAME profile, at least the major peaks, with the internal standard and the integration. ## Why X-ray diffraction does not identify an oil X-ray diffraction identifies crystalline phases. The oil is liquid or amorphous, and the starch carrier may show a broad pattern that says nothing about the fatty acid. An XRD pattern can tell you about the carrier’s crystalline state; it cannot tell you whether the oil is EPA, DHA or a vegetable oil. For a mineral powder, XRD can separate a chelate from an oxide. For an oil powder, GC is the identity method. A supplier who offers XRD as the identity test for EPA is answering a different question. FTIR can show that an oil is present, but it does not give the fatty-acid profile; use it as a supporting check, not as the profile. ## What substitution and dilution look like Adulteration cases, what the EPA assay does, and what catches them | Case | What the assay does | What catches it | Lower-EPA oil | Passes at 10% on a higher oil load | Oil load, EPA on the oil, carrier mass | Vegetable-oil dilution | Passes only if the EPA is spiked back | C18:2 and C18:1 rise; EPA/DHA ratio moves | Oxidised oil | EPA can stay above 10% | PV, p-AV and TOTOX on the lot | Undeclared source | Passes; the molecule is the same | Source statement, profile, sterol pattern | Carrier dilution | Passes at 10% with less oil | Oil load, fill weight, label arithmetic A 10% powder made from a 20% oil at half the oil load and one made from a 10% oil at full load can both pass. The difference is the carrier and the dose, and neither is visible in the EPA percentage. Adulteration is not always fraud; a change of oil source without a specification change is enough to make the lot different. ## How to write the identity into the specification Write the full identity: “Microencapsulated EPA powder, ≥10.0% EPA by GC, FAME with internal standard, result calculated as free acid, DHA reported, EPA/DHA ratio reported, oil load declared or agreed, carrier modified starch, antioxidant declared, moisture ≤5.0%, PV ≤5.0 meq/kg, p-AV ≤20.0, ≥95% through 40 mesh, heavy metals Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg, microbiology APC ≤1,000 cfu/g with yeast and mould ≤100 cfu/g and E. coli and Salmonella absent, source named, allergen statement attached.” A specification that says “EPA 10%” and nothing else is a catalog line, not an identity. Source is part of identity for labelling, even though the molecule is the same. The COA should carry the lot code and the specification version, and the pack should carry the same lot code. ## Five questions for a supplier - What is the oil source, and what EPA/DHA profile does the oil have before encapsulation? - What is the GC method and basis, and can you send the chromatogram with the lot COA? - What is the oil load, carrier and antioxidant, and are they permitted for our market? - What are the lot PV, p-AV, TOTOX and moisture, and what shelf life is assigned? - Can the lot code on the COA, the pouch and the drum be matched, and is a retained sample held? A supplier who cannot answer these five leaves the identity unproven. The COA page explains the certificate lines; the grade page explains the difference between an EPA powder and a fish oil powder; the EPA vs DHA page covers the ratio arithmetic. The catalog specification is on the EPA powder product page, and the certificate terms are in the COA glossary entry. ### 02.1 EPA vs DHA: profile, dose and the label URL: https://nutrition.rainwoodbio.com/products/fatty-acids/epa-powder/grades/epa-vs-dha/ Reviewed: 2026-11-19 EPA (C20:5 n-3) and DHA (C22:6 n-3) are different fatty acids, with different molecular weights and different label arithmetic. A powder standardised on EPA is not interchangeable gram-for-gram with one standardised on DHA or on EPA+DHA. The choice belongs in the specification and the label, before the formula is fixed. In one lineEPA and DHA are different label ingredients: the same milligram of powder carries a different amount of each, and the ratio has to be written into the specification. ## Two fatty acids, not two grades of one thing EPA has 20 carbons and five double bonds; DHA has 22 and six. Both are long-chain n-3 fatty acids; the difference is not a quality ranking. The free acids have molecular weights of about 302.5 and 328.5. In an oil they are usually triglycerides or ethyl esters, and the fatty-acid figure is calculated after transesterification, so the same mass of fatty acid corresponds to a larger mass of ester. DHA has one more double bond, so more sites for oxidation; in a blend it is usually the more oxidation-sensitive of the two. That is a stability fact, not a ranking of the two. ## Content, basis and the label figure The label dose is a weight of fatty acid, not a weight of powder, and it is usually stated as free acid. Ten percent EPA as free acid is about 9.2% as ethyl ester; ten percent DHA as free acid is about 9.2% as ethyl ester. For a triglyceride the conversion is different again. A label that says 100 mg EPA needs a stated basis. What common omega-3 label wording means for powder weight | Label wording | What the number means | Powder for 100 mg of the named fatty acid | EPA 10% | ≥10% EPA by GC | 1,000 mg for 100 mg EPA | DHA 10% | ≥10% DHA by GC | 1,000 mg for 100 mg DHA | EPA+DHA 10% | Sum of the two ≥10% | ≥1,000 mg for 100 mg total; the weight for 100 mg EPA depends on the EPA share | Omega-3 10% | Sum of n-3 fatty acids, not only EPA and DHA | Profile-dependent; not a substitute for an EPA figure If EPA is 60% of a 10% EPA+DHA powder, 100 mg EPA needs 1,667 mg. A 250 mg EPA label needs 2,500 mg of a 10% EPA powder; that is a stick or several capsules, not a single capsule. Do the arithmetic before the dosage form is chosen. ## The ratio has to be specified The ratio is the proportion of EPA to DHA. It is not fixed by the word “omega-3”. Fish oils vary by species and concentration; algal oils are often DHA-rich; a high-EPA concentrate can be mostly EPA. A ratio specification should say “EPA:DHA = x:y, both by GC on the same basis”, or set absolute minima for each. A ratio alone can be met by dilution; pair it with absolute figures. The ratio moves with source and concentration. A change of ratio is a new label ingredient, not a minor adjustment. If the label makes a figure for each fatty acid, the ratio and the two absolute figures belong in the specification together. ## Fish and algal sources change the file Fish oil brings a fish allergen statement and the dioxin and PCB question, with a long history of use in the EU, US and UK. Algal oil avoids the fish allergen, but its EU novel-food authorisation and US regulatory history have to be checked. The molecule is the same; the regulatory route and the allergen statement are not. Source declaration belongs on the specification and the label. “EPA powder” alone is not a source. A fish-derived lot and an algal lot can meet the same EPA figure and carry different labels, different allergen statements and different market files. The compliance page sets out the three routes. ## Naming the ingredient on the label Name the ingredient as it is: microencapsulated EPA powder, fish oil powder, algal DHA powder. Do not call an EPA+DHA powder “EPA powder”. Declare EPA and DHA separately if the label makes a figure for either; a total omega-3 figure is a different claim. The carrier and antioxidant are ingredients and have to be declared. The allergen statement follows the source, not the fatty acid. The label arithmetic is not a disease claim. The authorised-claims register is a separate review, and a composition figure does not authorise a claim by itself. Review the wording before the artwork. ## When to choose which Choosing an omega-3 powder from the label backwards | If the label is built on | Choose | Check | An EPA figure | EPA powder | DHA result and ratio; source and allergen | A DHA figure | DHA powder or algal DHA | Source; EPA result; regulatory route | EPA+DHA or fish oil | Fish oil powder | EPA/DHA split; fish allergen; oxidation | A fish-free label | Algal source | Novel-food or dietary-ingredient route Choose on the label, the arithmetic, the allergen and the market—not on a generic ranking. If the formula needs both fatty acids, a blend is a third specification: write the ratio and the total, and test both. The grade page compares EPA powder with fish oil powder; the COA page shows the GC lines; the fish oil powder and DHA powder pages carry the neighbouring specifications. The catalog entry for this grade is on the EPA powder product page. ### 01 What the COA for evening primrose oil powder actually contains URL: https://nutrition.rainwoodbio.com/products/fatty-acids/evening-primrose-oil-powder/coa/ Reviewed: 2026-11-19 A certificate for microencapsulated evening primrose oil powder reports on the oil inside the matrix and the powder that carries it. It should show GLA by GC, the oil load, moisture, peroxide value, p-anisidine value, the carrier, particle size, heavy metals and microbiology, each with a method and a release limit. The catalog specification is the gate; the batch COA is the record of what a particular lot measured. In one lineAn evening primrose oil powder COA has to report the GLA assay, the oil load and the oxidation values together, because no one of them describes the powder. ## The certificate as a test report A certificate is auditable when every line answers three questions: what was measured, how, and against which limit. A line without a method cannot be checked elsewhere; a limit without a method cannot show what the lot passed. Identity, oil and oxidation limits · microencapsulated evening primrose oil powder 40% | Parameter | Method | Release limit | Reported on | GLA (C18:3 n-6) | GC-FID of fatty-acid methyl esters | 8.0–11.0% | Extracted oil | Oil load | Solvent extraction or gravimetric | 40.0% | Powder as sold | Moisture | Karl Fischer or loss on drying | ≤4.5% | Powder as sold | Peroxide value | AOCS Cd 8b-90 or ISO 3960 | ≤8.0 meq/kg | Extracted oil | p-Anisidine value | AOCS Cd 18-90 or ISO 6885 | ≤20.0 | Extracted oil | Carrier | Declaration; IR if disputed | Modified starch, declared | Powder as sold | Particle size | Sieve analysis | ≥95% through 40 mesh | Powder as sold | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Powder as sold | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Powder as sold The GC line needs more than a percentage. The certificate should name the column, the methyl-ester preparation, the standard and the integration. GLA and alpha-linolenic acid are both C18:3; a column that does not resolve the isomers can report a combined figure. The method note has to show that the GLA peak was identified, not only that a C18:3 peak was integrated; the analytical methods index explains how the result is documented. ## Two numbers, two bases GLA is measured on the oil extracted from the powder; oil load is measured on the powder as sold. A certificate that prints 8.0–11.0% GLA beside 40.0% oil load without saying which is which leaves the reader to guess. Read on the right bases, 100 g of powder carries 40 g of oil and, at 8–11% GLA in that oil, 3.2–4.4 g of GLA. The assay is a fatty-acid assay, not a single-molecule assay. The oil is transesterified to methyl esters, separated by gas chromatography and detected by flame ionisation. GLA is one peak in a profile that also contains linoleic, oleic, palmitic and stearic acids. The percentage is a normalised area or an internal-standard calculation; the certificate should say which, because the two handle minor peaks differently. The oil load is the other half of the label arithmetic. It can be measured by extraction or calculated from the oil charged and the powder yield; a measured value is stronger evidence, and a calculated value should be labelled as calculated. Whichever route is used, the certificate should state it beside the result. ## Release limit versus batch result The release limit is the gate; the batch result is the measurement. They belong in separate columns. If the result column simply repeats the range, it is a copy of the specification, not evidence. Peroxide value is the parameter where this matters most. A lot released near the ceiling passes the limit and is still a different material from one released near the floor for a formula that will sit warm for a year. p-Anisidine value measures secondary oxidation products and can rise while the peroxide value falls, because hydroperoxides decompose. A low PV with a high p-AV is not a fresh oil. Oil load is a release parameter, not a label decoration. A lot below the 40.0% oil declaration is out of specification, because the powder delivers less GLA per gram even when the oil itself is in range. The figure to check against the label is the GLA on the powder: oil load multiplied by GLA on the oil. Particle size is the same kind of check: a powder that fails the 40 mesh sieve changes flow and fill weight. ## What moves between batches The oil is a crop product. Evening primrose seed oil varies with the seed lot, the season, the extraction and the refining. The GLA fraction usually sits in the 8–11% window, but the linoleic, oleic and palmitic fractions move with it. A certificate that reports only GLA hides the part of the profile that shows whether the oil is fresh and whether it is the source ordered. The oil load moves with the encapsulation run: the oil-to-carrier ratio, the emulsion, the drying conditions and the yield. A 40.0% declaration is a target with a tolerance; the certificate should show the measured value and the tolerance the lot was released against. Peroxide and p-anisidine values move with heat, oxygen and time; a lot that left the dryer with a low PV can arrive higher if the pouch is not a barrier. A darker powder or a painty smell is a reason to look at PV and p-AV. ## When to order an outside test Order an independent test for a new oil source, a first shipment into a regulated market, a disputed COA or a lot held for a long time. The panel is targeted, not a full repeat. Ask for the fatty-acid profile by GC-FID with the chromatogram and the standard used, and for the GLA, linoleic, oleic, palmitic and stearic figures together. Add the oil load by extraction, PV and p-AV by a named method, moisture, heavy metals by ICP-MS and the microbiology panel. A “not detected” line without a limit of quantification describes the method, not the sample, so ask for the LOQ and the chromatogram. ## What to compare between suppliers Six checks that show whether two evening primrose oil powder offers are for the same material | Check | Ask for | What it catches | Source | Oenothera biennis seed oil, origin and refining route | A single-source oil from a blend or another GLA oil | GLA and basis | Lot result on the oil, GC method and chromatogram | A real result from a specification sheet | Oil load | Measured value, tolerance and carrier | A 40% claim with no measured oil | Oxidation | PV and p-AV with methods and results | A claim of freshness with no figures | Physical | Moisture, mesh, appearance and flow | A powder that cakes or fails the sieve | Traceability | Lot code on COA, pack and retained sample | A COA that cannot be tied to the bag The catalog specification sits on the product page. The source decision is on the grades page and the EPO versus borage page; the tests that separate EPO from another GLA oil are on the identity page. The certificate terms are in the COA glossary entry. ### 02 Evening primrose, borage or blackcurrant: choosing a GLA source URL: https://nutrition.rainwoodbio.com/products/fatty-acids/evening-primrose-oil-powder/grades/ Reviewed: 2026-11-19 Evening primrose, borage and blackcurrant are three botanical sources of gamma-linolenic acid, and they are not interchangeable. Evening primrose oil carries about 8–11% GLA, borage about 18–23% and blackcurrant about 14–19%, with different linoleic, oleic and n-3 fractions around it. The source decides the GLA per gram, the powder weight behind a label figure, the ingredient name and the fatty-acid profile on the certificate. In one lineThe GLA source sets the oil's fatty-acid profile, the powder weight behind a label figure and the ingredient name, so it is a specification decision before it is a formulation one. ## One fatty acid, three oils GLA is a C18 n-6 fatty acid with three double bonds. It occurs in the seed oils of several plants, at different concentrations and alongside different fatty acids. Evening primrose (Oenothera biennis) is the established source; borage (Borago officinalis) carries the highest GLA fraction of the three; blackcurrant (Ribes nigrum) sits between them and brings alpha-linolenic and stearidonic acids with it. The powder format adds a second variable. A microencapsulated powder is an oil load in a carrier, usually modified starch. The GLA on the powder is the oil load multiplied by the GLA in the oil. Two powders can both be called “40% oil” and deliver different GLA per gram because the oils differ. A source change is therefore not a like-for-like substitution. It changes the certificate, the label ingredient name, the fatty-acid profile, the powder weight per serving and possibly the colour and taste. Decide the source before the grade and the pack. All three oils are used as food-supplement ingredients in the EU, the US and the UK. The label, not the GLA figure, decides how the source is declared: name the oil in the ingredient list, use the INCI name that belongs to it, and check the current novel-food or dietary-ingredient position for the specific oil and process. The allergen statement follows the source and the carrier, not the GLA content. ## The three oils side by side Typical fatty-acid pattern of the three GLA oils, before microencapsulation | Source | GLA in oil | Linoleic | Other markers | Label name (INCI) | Evening primrose (Oenothera biennis) | 8–11% | 70–75% | Oleic 8–12%; palmitic 5–7% | Oenothera Biennis Oil | Borage (Borago officinalis) | 18–23% | 35–40% | Oleic 15–20%; palmitic 10–12% | Borago Officinalis Seed Oil | Blackcurrant (Ribes nigrum) | 14–19% | 40–45% | Alpha-linolenic 12–14%; stearidonic 2–4% | Ribes Nigrum Seed Oil These are typical ranges, not specifications. Crop, origin, extraction and refining move them; a supplier's certificate should carry the measured profile for the lot, not the table from a brochure. ## What changes in the powder At the same 40% oil load, the GLA on the powder follows the oil: about 3.2–4.4% from evening primrose, 7.2–9.2% from borage and 5.6–7.6% from blackcurrant. The carrier is the other 60%, so the powder weight behind a given GLA figure is set by the source before the formulation is written. Borage and blackcurrant oils can be darker and stronger-tasting than evening primrose oil; the powder's colour and flavour follow the oil and the carrier. A switch can change the appearance of a stick or the taste of a chewable tablet even when the GLA figure is matched. The oil load, the carrier and the mesh are separate specification lines; a source change does not change them, but it can change the emulsion and the flow. Oxidation is not a ranking of the sources. The number of double bonds per gram and the natural tocopherol content differ, and the oil's refining history matters more than the name on the label. A borage powder is not automatically more stable than an evening primrose powder; both need PV and p-AV data. ## The powder weight behind the label figure This page uses “dose” in the label sense: the amount of GLA declared per serving, not a health recommendation. The arithmetic is simple. At 40% oil load, 1 g of evening primrose powder carries 32–44 mg GLA, 1 g of borage powder 72–92 mg and 1 g of blackcurrant powder 56–76 mg. To declare 100 mg GLA per serving, the formulator needs about 2.3–3.1 g of evening primrose powder, 1.1–1.4 g of borage powder or 1.3–1.8 g of blackcurrant powder. Those weights decide the dosage form. A 3 g stick is feasible; a 3 g capsule is not. If the label figure has to sit in a 500 mg capsule, the oil may be the better format, or the source with the higher GLA fraction. The carrier is not inert to the calculation: it adds weight and volume, and it changes the mouthfeel. Material weight needed for a 100 mg GLA label figure, at 40% oil load | Material | GLA in oil | GLA per gram of powder | Powder for 100 mg GLA | Evening primrose powder | 8–11% | 32–44 mg | 2.3–3.1 g | Borage powder | 18–23% | 72–92 mg | 1.1–1.4 g | Blackcurrant powder | 14–19% | 56–76 mg | 1.3–1.8 g ## Writing the source into the specification Start with the source in the product name: “Microencapsulated evening primrose oil powder 40%” or “Microencapsulated borage oil powder 40%.” Then state the oil load, the GLA range and its basis (on the oil), the fatty-acid profile, the carrier, PV and p-AV, moisture, mesh and the allergen statement. A specification that says “GLA 10% powder” names a figure, not a source. The certificate should repeat the source, the oil load and the GLA on the oil, and it should carry the measured fatty-acid profile. If the source is a blend, the blend and the ratio belong on the label and the certificate; a blended oil is not the same ingredient as a single-source oil. Keep the source and the grade as separate decisions. The grade is the oil load and the carrier; the source is the oil. A change to either is a change-control event, not a purchasing swap. Re-run the label, the allergen statement and the stability file after the change. ## When not to switch Do not switch the source if the label already names evening primrose oil, if the customer's specification names the species, or if the market file was built on the EPO route. Do not switch to solve a flow or taste problem that belongs to the carrier or the mesh. Do not switch on a GLA figure alone: the figure can be matched while the fatty-acid profile, the ingredient name and the powder weight all change. If a lower powder weight is the real requirement, compare the formats before the sources: a higher oil load, a different carrier or an oil may solve it. If the source has to change, keep both specifications open until the label and the stability data are fixed. The catalog limits are on the evening primrose oil powder product page. The certificate lines are on the COA page, the direct evening primrose versus borage comparison is on the EPO versus borage page, the source evidence is on the identity page, and the label route is on the compliance page. ### 03 Microencapsulated evening primrose oil is protected, not immune; oxidation decides the shelf life URL: https://nutrition.rainwoodbio.com/products/fatty-acids/evening-primrose-oil-powder/stability/ Reviewed: 2026-11-19 Microencapsulation puts a starch matrix between the oil and the air, and that slows oxidation; it does not stop it. Evening primrose oil is rich in linoleic and GLA, both with multiple double bonds, and the oil inside the powder can oxidise during drying, storage and use. Peroxide value and p-anisidine value are the lines that show it first, often before the GLA assay moves. In one lineMicroencapsulation slows the oil's exposure to oxygen and light; it does not stop oxidation, so peroxide and p-anisidine values set the shelf life. ## The powder in its pack In the sealed pouch or drum, the powder's main enemies are oxygen and moisture that enter through the pack, and heat that speeds the reaction. The starch matrix lowers the oil's contact with air and light, but the oil is still distributed as fine droplets with a large surface area. The matrix is not a hermetic capsule; it is a porous solid. The catalog limits are moisture ≤4.5%, PV ≤8.0 meq/kg and p-AV ≤20.0. Those are release limits, not shelf-life limits. A lot released near the ceiling has little room left, while one released near the floor has more. The pack has to hold the powder at low moisture and low oxygen for the shelf life; a foil pouch and a lined fiber drum do that only if they are sealed and handled well. Flow and caking are the visible signs. A powder that has absorbed moisture may still pass the GLA assay and fail the stick line. Check the pouch for integrity before the lot is accepted, and check the powder for lumps before it goes into a blend. ## In a beverage or a wet matrix The powder is dispersible, not soluble. In water it hydrates the starch, releases the oil droplets and creates an emulsion that is less protected than the dry powder. A ready-to-drink application therefore has a shorter window and a different set of stresses: dissolved oxygen, pH, minerals, shear and time. Acidic beverages, iron or copper traces and high shear all increase the oxidation rate. A dry blend in a stick is closer to the powder's comfort zone than a liquid beverage, because the water activity stays low until the consumer mixes it. For a liquid, test the finished matrix, not only the powder, and set the shelf life on the finished product. Taste is an early indicator. A painty, fishy or cardboard note in a beverage is an oxidation signal; the COA may still be inside its release limits because the COA describes the powder, not the drink. ## Heat, light, oxygen and water What accelerates oxidation in an evening primrose oil powder, and what controls it | Factor | Effect on the oil | Control | Oxygen | Hydroperoxides form at the double bonds | Nitrogen flush, low headspace, sealed foil | Heat | Faster reaction during drying and storage | Cool storage, controlled drying | Light | Photo-oxidation, colour and odour change | Opaque pouch, drum and dark store | Moisture | Starch hydration, oil release, caking | ≤4.5% moisture, sealed pack, dry room | Trace metals | Iron and copper catalyse oxidation | Specification and equipment control | Shear and porosity | More oil surface exposed | Gentle handling, controlled milling Temperature is the easiest lever. As a rough rule, a 10°C rise roughly doubles the rate of lipid oxidation; a cool, dark store buys time that no certificate can. ## A stability protocol A stability file for the powder has two arms: accelerated and real time. The accelerated arm is usually 40°C and 75% relative humidity for six months, with pull points at 0, 1, 2, 3 and 6 months. The real-time arm runs at the market's storage condition, often 25°C and 60% relative humidity, with pull points at 0, 3, 6, 12, 18 and 24 months. The real-time arm is the one that supports the shelf life; the accelerated arm flags a failure early. At each pull point, test GLA, oil load, moisture, PV, p-AV, appearance, particle size and microbiology. GLA is usually the last line to move; PV and p-AV move first. A protocol that tests only GLA is testing the least sensitive line. Test the market pack, not a laboratory jar. The pouch or drum, the headspace and the closure are part of the system. If the product is a stick or a capsule, test the finished format as well; the shell and the matrix can add or remove protection. ## The formula is part of the exposure A capsule shell is a barrier; a tablet is a compressed matrix with its own porosity; a stick is a foil laminate that protects until it is opened. The same powder can have a different shelf life in each. Compression heat, granulation moisture and the excipients around the powder all matter. An antioxidant in the oil or the carrier can slow oxidation, but it has to be declared and it does not replace the pack. Tocopherols, ascorbyl palmitate and rosemary extract are common; the specification should say which one is present and at what level, and the label should declare it. An antioxidant in the oil is a processing aid, not a health claim on the pack. Carrier choice matters too. Modified starch is the declared carrier; a different starch or a different oil load changes the matrix, the moisture uptake and the surface area. A formula change is a stability change until the data says otherwise. ## How a shelf life is assigned The shelf life is the period for which the product stays inside its agreed limits in its market pack. It is supported by the real-time data, not by the release specification. The release limits are the gate at the factory; the shelf-life limits are the gates at the end of the period, and they are usually tighter. Set the failure criteria before the study: a PV ceiling and a p-AV ceiling below the release limits, a GLA floor, a moisture ceiling, a micro specification and an appearance standard. Then read the data. If PV reaches the ceiling at 18 months, the shelf life is 18 months or less, even if GLA is unchanged. The catalog does not carry a shelf-life figure. The batch COA, the stability file and the pack together support the shelf life agreed for the product; ask for the study, the pull points and the failure criteria, not only a number of months. The catalog limits are on the evening primrose oil powder product page. The certificate lines are on the COA page, the pack options are on the MOQ and packaging page, the label and contaminant rules are on the compliance page, and the source evidence is on the identity page. The microbiology method note explains the counts that belong in the stability file. ### 04 Evening primrose oil powder: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/fatty-acids/evening-primrose-oil-powder/moq/ Reviewed: 2026-11-19 Evening primrose oil powder is stocked from 1 kg. The 1 kg foil pouch is the smallest pack drawn from a released lot, and the 25 kg fiber drum is the production pack; the catalog lead time is 1–7 days for the standard 40% powder. A quotation is built on the specification, the pack, the quantity and the destination, not on the product name alone. In one lineOne kilogram is the smallest pack drawn from a released lot; the 25 kg drum is the same material in a production pack, and the quotation is built on the specification. ## Why the minimum is 1 kg The kilogram is the qualification unit. It is enough for a formulation trial, a label and allergen review, a micro test and a short stability check, and it is small enough that a project can start before the annual volume is known. It is also the smallest pack that can be drawn from a released lot and traced back to the batch COA. The 1 kg pouch is not a sample sachet. It is a stock pack from a production lot, with the same specification as the drum and a COA for its lot. That matters for a trial: a hand sample from the reactor may not represent the milled, blended and packed material. Ask for the sample from the lot that will ship. Above 1 kg, the order is the same material in a larger pack or in multiple pouches. The lot is the traceable unit; the pack is the handling unit. A 25 kg drum is not 25 separate kilograms with 25 certificates; it is one lot with one COA and one retained sample. ## The pack The standard pack is a 1 kg foil pouch and a 25 kg fiber drum. The pouch is a moisture and light barrier; the drum is a handling and transport pack. Both should be sealed, labelled with the lot code, the net weight, the production date and the storage condition, and packed so that the powder is not compressed into a block. Ask two questions about the pack. Is the pouch nitrogen-flushed, and what is the headspace? What is the liner in the drum? The answers change the oxidation protection, not the specification on the certificate. A 1 kg pouch is a convenient trial pack but a poor long-term store once it is opened. If the project uses a few grams a day, split the pouch into smaller sealed portions or order a pack size that matches the consumption. A powder that sits open in a humidity-controlled room is still exposed to oxygen. The pack is also a label surface. The lot code on the pouch should match the COA and the packing list; a mismatch is a traceability problem, not a printing problem. ## Lead time The catalog lead time is 1–7 days for the standard 40% powder in the standard pack, from a released lot. The range covers the time to pick, pack, document and dispatch; it is not a promise that every order ships on day one. Anything outside the standard specification is a production run with a longer lead time: a different oil load, a different carrier, a different mesh, an agglomerated powder, a custom pack. The quotation should state the lead time for the exact specification, not the catalog figure for the standard one. Documentation travels with the lot: the COA, the specification, the SDS and the allergen statement. If a customer needs a legalised or customer-specific document, that is a separate task with its own time. The material can be ready before the paperwork is. ## What a quotation needs Six details decide whether two offers describe the same material. Give all six in the inquiry; a one-line request for “EPO powder 40%” will produce offers that are not comparable. Six details that turn an evening primrose oil powder inquiry into a comparable quotation | Detail | Why it changes the offer | Identity and basis | Source, oil load, GLA range and whether GLA is on the oil or the powder | Carrier and antioxidant | Modified starch and any antioxidant, because both are label and stability items | Pack and quantity | 1 kg pouch, 25 kg drum or a custom pack, and the number of lots | Destination and Incoterm | Export documents, transit and the delivery point | Documentation and label | COA, SDS, allergen statement and any customer-specific label | Timing and sample | When the material is needed and whether a sample must precede the order Add the mesh and the application if they are fixed. A stick application may need a finer or more free-flowing powder; a capsule application may need a denser one. The quotation can only reflect what the inquiry states. ## The sample A sample should come from a released lot and travel with that lot's COA. The 1 kg pouch is the smallest standard pack; a smaller sample can be arranged, but it should still be drawn from the same lot and documented in the same way. Test the sample for the things the certificate cannot tell you: flow, dispersibility, colour and odour, and how it behaves in the intended matrix. Run a short PV and p-AV check after storage if the project has a long shelf life. Compare the sample's COA with the lot COA that will ship; a sample from a different lot is a different material. Record the sample lot code. If the sample is approved and the production order arrives from a different lot, the approval does not automatically carry over; the new lot needs its own COA review. ## Terms and change control The quotation should state the Incoterm, the pack, the quantity, the lead time, the documents and the shelf life at shipment. The purchase order should repeat the specification revision and the lot or lot range. The commercial offer is built against the specification, so a change to the specification is a new offer, not a revision of the old one. Acceptance terms should say what happens if a lot fails the agreed specification: a retest, a replacement or a return. The claims window should be long enough to run the receiving tests. The shelf life at shipment should leave enough room for the customer's own shelf life. Change control is the last term. A new oil lot with a different GLA profile is a new lot, not a new specification; a new source, carrier, mesh or pack is a new specification. Put the change in writing before the order, not after the first delivery. The catalog limits are on the evening primrose oil powder product page. The certificate lines are on the COA page, the oxidation limits are on the stability page, the destination rules are on the compliance page, and the freight terms are on the logistics page. The ordering terms are defined in the MOQ glossary entry and the lead-time glossary entry. ### 05 Where evening primrose oil is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/fatty-acids/evening-primrose-oil-powder/compliance/ Reviewed: 2026-11-19 Evening primrose oil has a long history as a food supplement ingredient in the EU, the US and the UK, and the powder is that oil dispersed in a modified-starch matrix. What a market file has to prove is narrower than the oil's history: the route, the carrier, the contaminant results and the label. Those four items are checked separately, and a failure in any one is enough to stop a launch. In one lineThe oil has a history of use; the carrier, the contaminants and the label are what each market file still has to prove. ## Four checks, not one Four questions decide an ingredient file, and they are separate: is the ingredient permitted, is the food category allowed, do the contaminants meet the limits, and does the label carry the right words? A lot can pass the metals panel and still sit on the wrong route; a correct route does not fix a label that omits the carrier. The powder adds a carrier, a processing step and a particle-size specification. The carrier and the process must be permitted, and the carrier must be declared. ## The European Union and the United Kingdom Directive 2002/46/EC sets the EU food-supplement framework. It harmonises the vitamin and mineral lists only; an oil such as evening primrose is left to national rules, so the member state matters. Evening primrose oil was in food-supplement use before 15 May 1997 and is not a novel food on that basis; check the current novel-food catalogue entry for the oil and the process, because a new extraction or concentration step can change the answer. The general food law Regulation (EC) No 178/2002 sets the safety duty. Labelling follows Regulation (EU) No 1169/2011, including the ingredient list and the allergen declaration. Contaminants follow Regulation (EU) 2023/915, and claims follow Regulation (EC) No 1924/2006. The carrier belongs on the label: modified starch has its own name and, where applicable, an E number, and any antioxidant is declared in the same list. The UK applies the retained framework: the GB novel-foods register is the route reference for Great Britain, Northern Ireland follows the EU regime, and the labelling, contaminant and claims rules mirror the EU structure. Check the current GB text for the specific oil and carrier. ## The United States US law covers evening primrose oil as a dietary ingredient under DSHEA. There is no pre-market approval of a supplement or its label; the firm carries the responsibility. Manufacturing follows the supplement GMPs in 21 CFR 111, and labelling follows 21 CFR 101. An ingredient first marketed after 15 October 1994 is a new dietary ingredient and needs a 75-day pre-market notification, unless its history of use removes it from that category; evening primrose oil has a long US supplement history, and the supplier should state the basis for its position. FALCPA's major-allergen list — milk, egg, fish, crustacean shellfish, tree nuts, wheat, peanuts, soybeans and sesame — does not include evening primrose. The oil is still a botanical ingredient and the carrier is a food ingredient, so the finished label has to name both. A separate California regime, Proposition 65, is a warning law rather than a specification limit; a lead result near the specification ceiling is a reason to check it. ## Contaminants and the specification Catalog limits beside the EU supplement ceilings in force at this review | Parameter | Catalog limit | EU supplement limit | Note | Lead | ≤3 mg/kg | 3.0 mg/kg | Regulation (EU) 2023/915 | Cadmium | ≤1 mg/kg | 1.0 mg/kg | Regulation (EU) 2023/915 | Mercury | ≤0.1 mg/kg | 0.10 mg/kg | Regulation (EU) 2023/915 | Arsenic | ≤2 mg/kg | No harmonised EU maximum | National or customer limits apply | Peroxide value | ≤8.0 meq/kg | Not a regulatory maximum | Oxidation specification | p-Anisidine value | ≤20.0 | Not a regulatory maximum | Oxidation specification | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Set by the specification | Confirm the customer's criteria The EU ceilings apply to the supplement as sold. The powder's contribution is the limit multiplied by its use level; the rest of the formula contributes as well, so run the calculation on the finished product. Peroxide and p-anisidine values are lipid-quality parameters, not contaminants. They belong on the certificate and in the stability file, but they have no EU maximum; a customer can still set a tighter one. ## The claim boundary EU and UK health claims sit under Regulation 1924/2006 and the GB register. A claim has to be authorised; a footnote cannot rescue wording that is not on the register. At the time of this review, neither evening primrose oil nor GLA has an authorised health claim. GLA has no NRV and no specific nutrition claim in the Regulation's Annex, so a “source of GLA” claim needs a legal check. A US supplement may carry a structure/function statement if the disclaimer is attached. A disease claim needs an authorised qualified health claim; without one, the product is a drug. The line is drawn by the words on the pack. In all three markets, the defensible position is to describe the material, its manufacture and its testing, and to leave disease, disease-related use and prevention out of the copy. ## The file a buyer should hold Documents behind an evening primrose oil powder food-supplement file | Document | What it proves | Common gap | Specification | Source, oil load, GLA basis, limits and methods | GLA without a basis | Batch COA | What the lot measured against the release limits | A result column that repeats the specification | Allergen and source statement | The botanical source and the allergen status | A generic statement with no lot | Carrier declaration | The modified starch and any antioxidant | Carrier named only as “starch” | Route note (EU) | The history-of-use or novel-food position | A generic “EU compliant” line | US ingredient note | The dietary-ingredient basis and any NDI position | No history-of-use evidence | SDS and stability data | Handling, storage and shelf life | A shelf life without data | Contaminant and micro data | The lot meets the agreed limits | Numbers without methods or LOQs ## The compliance checklist - Name the botanical source and the oil load; confirm the GLA basis. - Name the carrier and any antioxidant, and check their status in the destination market. - Confirm the route: EU history of use or novel-food position; US dietary-ingredient basis; UK retained rules. - Compare lead, cadmium, mercury, arsenic and microbiology with the limits for the finished product. - Check the allergen statement against the source and the carrier. - Check the label: ingredient names, carrier, antioxidant, net quantity and storage condition. - Keep claims to the authorised list and out of disease language. - Keep the specification, COA, SDS, stability file and route notes together, dated. The catalog limits are on the evening primrose oil powder product page. The certificate lines are on the COA page, the source and label choices are on the grades page, and the source evidence is on the identity page. The market routes are set out on the EU, US and UK regulatory pages; the allergen list is explained in the Annex II glossary entry. ### 06 How we prove an EPO lot is evening primrose oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/evening-primrose-oil-powder/identity/ Reviewed: 2026-11-19 A GLA figure is not an identity. Several seed oils contain GLA, and a blend can be built to land inside an 8–11% range. Proving that a lot is evening primrose oil means showing the full fatty-acid profile, the oil load, the sterol pattern where needed and the oxidation values, and tying them to the lot on the certificate and the pack. In one lineA GLA figure can be matched by another oil or a blend; identity rests on the full fatty-acid profile, the oil load and the oxidation values agreeing with the source. ## Four layers of identity Identity is a chain, not a single test. The first layer is documentary: the species, the plant part, the supplier, the lot and the chain from the seed to the powder. The second is physical: appearance, colour, odour, flow and particle size. The third is chemical: the fatty-acid profile by GC, the GLA and linoleic figures, and the sterol pattern where a source is disputed. The fourth is oxidation: PV and p-AV, because a fresh oil and an aged oil can share a fatty-acid profile. No single layer is sufficient. A certificate can carry the right species name and the wrong oil; a GC profile can be matched by a blend; a physical check can pass on an oxidised powder. The layers have to agree, and they have to belong to the same lot. ## The GLA/linoleic ratio and the full profile Evening primrose oil is linoleic-rich: linoleic acid is about 70–75% of the oil and GLA about 8–11%, a ratio of roughly seven to one. Borage oil is about 35–40% linoleic and 18–23% GLA, a ratio of roughly two to one. Blackcurrant oil sits around 40–45% linoleic and 14–19% GLA, and it carries alpha-linolenic and stearidonic acids that the other two do not. The ratio is harder to fake than the GLA figure. A borage oil diluted with sunflower oil can be pushed to 10% GLA, but the linoleic and oleic figures move with the diluent, and the sterol pattern changes. An evening primrose oil cut with another GLA oil shows the same kind of shift. The full profile is the evidence; the GLA figure is the headline. Typical fatty-acid markers that separate the three GLA oils | Marker | Evening primrose | Borage | Blackcurrant | GLA | 8–11% | 18–23% | 14–19% | Linoleic | 70–75% | 35–40% | 40–45% | Oleic | 8–12% | 15–20% | 10–13% | Alpha-linolenic | Low | Low | 12–14% | Stearidonic | Trace | Trace | 2–4% | Linoleic:GLA | About 7:1 | About 2:1 | About 2.5:1 The ranges are typical, not specifications. The certificate should carry the measured profile for the lot. ## What XRD can and cannot show The powder is mostly carrier. X-ray diffraction sees the crystalline part of the modified starch, not the oil. The oil is amorphous and does not produce the sharp reflections that XRD identifies; the starch does. An XRD pattern can confirm that the carrier is a starch with a particular crystalline type, and it can show that a crystalline foreign phase is absent. It cannot prove that the oil is evening primrose oil. Read an “XRD identity” line on a powder COA as a carrier check, not an oil identity check. The oil identity belongs to the GC section. If a supplier offers a spectral fingerprint as identity evidence, ask which phase the method measures and which reference it compares against. A method that sees only the carrier cannot answer the source question. This is not a criticism of XRD. It is the right tool for the crystalline carrier and the wrong tool for a liquid oil dispersed in it. The certificate should say what each method measures. ## The routes that matter Four routes are worth testing. The first is a different GLA oil or a blend: borage or blackcurrant oil, or a blend of either with another oil, used to hit the GLA range. The second is a lower oil load than declared: more carrier, less oil, so the powder carries less GLA than the declaration implies, even when the oil is genuine. The third is oxidised oil: the GLA assay can stay in range while PV and p-AV climb. The fourth is a non-EPO oil with added GLA or a GLA concentrate, which can hit the figure without the evening primrose profile. The checks follow the routes. Full fatty-acid profile by GC, with the chromatogram; oil load by extraction; PV and p-AV by named methods; the sterol profile where a blend is suspected; and the colour and odour as a first screen. A single GLA result answers none of the four. ## Writing identity into the specification Write the species and the plant part, not only the common name: “evening primrose (Oenothera biennis) seed oil.” Add the oil load, the GLA range and its basis, the fatty-acid profile with typical ranges, the sterol profile if the customer requires it, PV and p-AV, moisture, carrier and mesh. State the identity method: GC-FID of the fatty-acid methyl esters, with peak identification against a certified standard and a column that resolves GLA from alpha-linolenic acid. A specification that says “GLA 10% powder” or “omega-6 powder” does not name the source. A specification that says “evening primrose oil powder 40%” without a profile does not give the laboratory a way to check the source. The two together do. The certificate should repeat the species, the oil load and the measured profile, and the lot code should match the pack and the retained sample. A certificate that cannot be tied to the bag is a document, not a trace. ## Five questions for a supplier - Which species and which plant part is the oil from, and is the oil single-source or a blend? - What is the GLA on the oil, and what are the linoleic, oleic, palmitic and stearic figures on the same lot? - What is the oil load, the carrier and the microencapsulation route, and is the oil load measured or calculated? - What are the PV and p-AV, with methods, and what is the oil's storage history before encapsulation? - Can you send the chromatogram, the sterol data where available, and the COA for the lot that will ship? The catalog limits are on the evening primrose oil powder product page. The certificate lines are on the COA page, the source comparison is on the grades page and the EPO versus borage page, and the market rules are on the compliance page. The analytical methods index covers the chromatographic and elemental tests behind the file. ### 02.1 Evening primrose vs borage oil: GLA content, dose and the label URL: https://nutrition.rainwoodbio.com/products/fatty-acids/evening-primrose-oil-powder/grades/epo-vs-borage/ Reviewed: 2026-11-19 Evening primrose oil and borage oil are both GLA sources, but borage carries roughly twice the GLA per gram. That changes the amount of oil or powder needed for a label figure, the ingredient name on the pack and the fatty-acid profile on the certificate. The regulatory route is broadly the same; the choice is a specification and label decision. In one lineBorage oil carries roughly twice the GLA of evening primrose oil, so the same label figure needs about half the oil or powder weight, and a different ingredient name. ## Two oils, two concentrations Evening primrose (Oenothera biennis) seed oil typically carries 8–11% GLA, with linoleic acid at 70–75% and oleic at 8–12%. Borage (Borago officinalis) seed oil typically carries 18–23% GLA, with linoleic at 35–40%, oleic at 15–20% and palmitic at 10–12%. The GLA figure is a concentration, not a ranking: borage is more concentrated, evening primrose is more linoleic-rich. The rest of the oil matters. A borage oil at 20% GLA is not just “twice the evening primrose” in a formulation; the lower linoleic fraction and the higher oleic and palmitic fractions change the powder's colour, taste and oxidation behaviour, and the sterol pattern is a further difference. The certificate should show the profile, not only the GLA. ## The conversion behind the label figure Start with the oil. One gram of evening primrose oil at 8–11% GLA carries 80–110 mg GLA; one gram of borage oil at 18–23% carries 180–230 mg. For a 500 mg oil capsule, that is about 40–55 mg from evening primrose and 90–115 mg from borage. Now the powder. At a 40% oil load, one gram of evening primrose powder carries 32–44 mg GLA, and one gram of borage powder carries 72–92 mg. A 100 mg GLA serving therefore takes about 2.3–3.1 g of evening primrose powder or 1.1–1.4 g of borage powder. The carrier is the rest of the weight in both cases. Material weight needed for a 100 mg GLA label figure | Material | GLA concentration | Weight for 100 mg GLA | Evening primrose oil | 8–11% | 0.9–1.25 g | Borage oil | 18–23% | 0.43–0.56 g | Evening primrose powder, 40% oil | 3.2–4.4% on powder | 2.3–3.1 g | Borage powder, 40% oil | 7.2–9.2% on powder | 1.1–1.4 g The arithmetic uses the label figure, not a health recommendation. The serving size, the capsule fill and the number of capsules per serving decide whether the weight is practical. ## The label names the source The ingredient list must name the oil. “Oenothera Biennis Oil” and “Borago Officinalis Seed Oil” are different INCI names, and “evening primrose oil” and “borage oil” are different food names. A blend has to be declared as a blend, with the ingredients in descending order by weight; a borage oil cannot be labelled as evening primrose oil, and a blend cannot be labelled as either single oil. The GLA figure on the label needs a basis. “100 mg GLA per serving from evening primrose oil” and “100 mg GLA per serving from borage oil” are different products with different ingredient weights. If the pack states the oil weight, the GLA figure follows from the oil's concentration; if it states the GLA figure, the oil weight follows. The two should agree with the COA. The source also drives the front-of-pack name. A product named “Evening Primrose Oil 1000 mg” cannot be made with borage oil, even if the GLA figure is the same. A reformulation from one to the other is a new label, a new ingredient declaration and a new stability file. ## The route is similar; the label is not In the EU, both oils are food ingredients with a history of use in food supplements before 15 May 1997 and are not novel foods on that basis; confirm the current novel-food catalogue entry for the specific oil and process. Both are outside the Annex II allergen list. The food supplement rules, the contaminant limits and the claims rules apply in the same way. The UK retained framework is the same in structure, and the US route covers both as dietary ingredients. The difference is the label, not the permission. The ingredient name, the GLA figure, the oil weight and the source statement all change. If the product carries a source-specific name or a customer specification that names the species, the other oil is a different material, not a substitute. Claims do not follow the source. As of this review, there is no authorised health claim for evening primrose oil, borage oil or GLA in the EU or the UK, and the US structure/function route still requires the disclaimer and excludes disease claims. A higher GLA figure is not a claim. ## When to choose which Choose evening primrose when the label names evening primrose oil, when the project has an established EPO specification and an EPO stability file, and when the larger powder weight per GLA figure fits the format: a stick, a larger capsule, a tablet or an oil. Choose borage when the GLA figure has to fit a smaller powder weight, when the formula can carry the borage name, and when the customer accepts the different fatty-acid profile. Choose neither as a drop-in. A source switch changes the ingredient name, the allergen statement, the certificate, the COA, the stability profile and possibly the taste and colour. It is a change-control event. If the project is still comparing, keep both specifications open until the label and the market file are fixed. One more test: compare the PV and p-AV of the two oils, not only the GLA. A more concentrated GLA oil is not automatically more stable in the powder. The oil load, the antioxidant and the pack decide that. ## Writing the choice into the specification Write two separate specifications, not one with a blank source. For evening primrose: “Microencapsulated evening primrose oil powder, 40% oil load, GLA 8.0–11.0% on the oil by GC, linoleic 70–75%, carrier modified starch, PV ≤8.0 meq/kg, p-AV ≤20.0, moisture ≤4.5%, ≥95% through 40 mesh.” For borage: “Microencapsulated borage oil powder, 40% oil load, GLA 18.0–23.0% on the oil by GC, linoleic 35–40%, carrier modified starch, PV and p-AV as agreed.” Each specification should carry the species, the INCI name, the oil load, the GLA basis, the fatty-acid profile, the carrier, the oxidation limits and the mesh. The certificate should repeat them, and the label should use the name that matches the specification. A combined “GLA powder” specification is not enough to tell the two apart. The catalog limits are on the evening primrose oil powder product page. The certificate lines are on the COA page, the three-source comparison is on the grades page, the source evidence is on the identity page, and the label rules are on the compliance page. ### 01 What the COA for fish oil powder actually contains URL: https://nutrition.rainwoodbio.com/products/fatty-acids/fish-oil-powder/coa/ Reviewed: 2026-11-19 A fish oil powder COA has to describe three things at once: the oil, the starch matrix around it and the lot itself. The useful lines are EPA+DHA by GC, EPA and DHA separately, moisture, PV, p-AV, carrier, particle size, heavy metals and microbiology, each with a method and a limit. The catalog numbers are the gate; the certificate records what one lot actually measured. In one lineThe 10% total hides more than it shows: the EPA/DHA split, the oxidation values and the carrier decide what the powder is. ## Reading a certificate line by line A certificate can be checked only when each line carries a method and a limit. Without a method, the number cannot be reproduced; without a limit, the reader cannot see what the lot was released against. The header should carry the lot code and CAS 8002-50-4. Identity and composition · microencapsulated fish oil powder 10% | Parameter | Method | Limit for release | Appearance | Visual | White to light yellow, free-flowing powder | EPA + DHA | GC-FID, fatty acid methyl esters | ≥10.0% | EPA | GC-FID, fatty acid methyl esters | Reported | DHA | GC-FID, fatty acid methyl esters | Reported | Moisture | Gravimetric, vacuum oven | ≤5.0% | Carrier and antioxidant | Declaration and starch identification | Modified starch and antioxidant, both named | Particle size | Sieve analysis | ≥95% through 40 mesh Oxidation and safety limits · microencapsulated fish oil powder 10% | Parameter | Method | Limit for release | Peroxide value | AOCS Cd 8b-90 or ISO 3960 | ≤5.0 meq/kg | p-Anisidine value | AOCS Cd 18-90 or ISO 6885 | ≤20.0 | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent The assay is a fatty acid methyl ester GC: the oil is transesterified, the methyl esters are separated on a capillary column and quantified against a standard. AOAC 991.39 is the usual reference for encapsulated fish oils. The certificate should name the column, the standard and the quantification method; without that, two laboratories can disagree about one lot. EPA and DHA are reported separately because a total hides the profile. A powder at 10% with 8% EPA and 2% DHA is not the same material as one at 5% and 5%, even though the sum is identical. DPA and other n-3 fatty acids sit outside the total, and the powder's fish oil content is a separate figure. ## Where the 10% is measured Ten percent means 100 mg of EPA+DHA in every gram of powder as sold. It is not the fish oil content. The oil is held in a modified starch wall, so antioxidant, moisture and starch make up the rest. A 10% powder built on a natural oil carrying about 30% EPA+DHA needs roughly one third oil; a concentrate needs less. The oil load belongs on the technical data sheet, not inferred from the assay. The basis matters. A result on a dried basis reads higher than one as sold, because moisture may reach 5%. State the basis once and use the same one in the specification. Build the label dose on the release floor, not the highest result seen. ## Limit, result and the oxidation arithmetic A release limit is the gate a lot has to pass; the batch result is the number the laboratory found. They belong in separate columns. A column that simply restates the limit has reported no measurement at all. Peroxide value and p-anisidine value measure different stages. PV counts hydroperoxides, the first products of oxidation; p-AV counts the aldehydes that follow. Neither is complete alone. TOTOX is twice PV plus p-AV, and it belongs beside the raw results. The catalog limits of 5.0 meq/kg and 20.0 allow a TOTOX of 30. The GOED voluntary monograph caps the same calculation at 26, so a lot can meet both lines and still sit above the benchmark. A buyer who wants the 26 ceiling should write it into the purchase specification as a third line. PV is also not monotonic. Hydroperoxides decompose as an oil ages, so the value can fall while p-AV rises. A low PV on an old lot is not proof of freshness; read the pair against the production date. Moisture belongs in the same review: water in the matrix speeds the decay of both wall and oil. ## Why two lots are not identical The fatty acid profile moves with species, fishing ground and season. Anchovy, sardine and menhaden do not deliver the same EPA/DHA ratio, so a species change without a specification change is a material change. The ratio is the quickest check: a natural oil keeps close to its source; a concentrate can be cut to almost any ratio. The oil load moves with the target assay and the dryer. Carrier, antioxidant or solids changes alter the emulsion, the particle size and the surface oil, and surface oil is the part most exposed to oxygen. Oxidation moves with all of the above plus time and temperature. A lot released at 2 meq/kg can reach the ceiling during a warm transit if the pack lets oxygen through. ## When independent testing earns its place Bring in an outside laboratory for a new supplier, a first entry into a regulated market, a carrier change or a disputed result. The panel should close the gaps left by the certificate: a full fatty acid profile with chromatogram, PV and p-AV by a named method, TOTOX, moisture, heavy metals by ICP-MS and the microbiology set. Two identity questions need more than a FAME run. The form of the oil, triglyceride or ethyl ester, is lost when the fatty acids are methylated for GC; it needs an intact lipid analysis, such as HPLC or GC of the intact esters. The carrier needs a starch identification and a named antioxidant. The fish allergen position is a file and label question, not a protein assay on a refined oil. ## Six checks before ordering Six checks, read together, show whether two offers describe one powder. A match on 10% alone proves very little. Six checks that separate one fish oil powder offer from another | Check | Ask the supplier | What it reveals | Source | Species, origin and form of the oil | Two oils with the same total and a different label | Profile | EPA and DHA separately, with the chromatogram | A measured lot from a copied 10% line | Oxidation | PV, p-AV and TOTOX, with methods and dates | A fresh lot from one near the ceiling | Carrier | Modified starch identity and antioxidant name | A declared matrix from an undisclosed blend | Allergen | Fish declaration and species statement | A file that can support the pack from one that cannot | Traceability | One lot code across certificate, pack label and retained sample | A certificate from a different lot The catalog specification is on the fish oil powder product page. The oil form is set out on the grade page, and the tests that separate one oil from another are on the identity page. The COA glossary defines the certificate terms. ### 02 Natural triglyceride, ethyl ester or re-esterified: choosing an omega-3 form URL: https://nutrition.rainwoodbio.com/products/fatty-acids/fish-oil-powder/grades/ Reviewed: 2026-11-19 The omega-3 form is a property of the oil inside the powder, not of the 10% figure. Natural triglyceride, ethyl ester and re-esterified triglyceride differ in how the oil is made, how much EPA+DHA a gram of oil carries, how the label describes it and how the powder behaves in a capsule, a tablet or a stick. The form is a sourcing decision before it is a marketing word. In one lineThe form decides the ingredient name and the oil load behind the 10%, not the milligrams of EPA+DHA the label declares. ## Why the form is a separate decision A microencapsulated powder is white to light yellow and free-flowing whatever oil it contains. The form is invisible in the powder, so it has to be declared rather than seen. That is why the specification should carry it as a line, next to the assay and the oxidation values. The three forms are not three grades of the same oil. They are three routes through the same raw material. Natural triglyceride is the refined oil as it comes from the fish. Ethyl ester is a concentrate made by transesterifying the fatty acids and distilling them. Re-esterified triglyceride takes the ethyl ester and puts the fatty acids back onto a glycerol backbone. Each route yields a different oil, and the powder made from it inherits the difference. ## Three forms side by side Omega-3 forms · how the oil is made and what it means for a 10% powder | Form | How the oil is made | Typical EPA+DHA in the oil | What it changes in the powder | Natural triglyceride | Refined fish oil; fatty acids stay on the glycerol backbone | About 20–35% | Higher oil load to reach 10%; the label can say triglyceride | Ethyl ester | Transesterification and distillation | About 50–90% | Lower oil load; the ingredient name should reflect the ester form | Re-esterified triglyceride | Ethyl ester re-attached to glycerol | About 50–80% | Lower oil load with a triglyceride label; a second process step The ranges are commercial, not fixed. What matters is that concentration belongs to the oil and 10% belongs to the formulation. A powder can hit 10% with a third of its weight as natural oil or with a smaller amount of concentrate, and the two powders will not behave the same in the dryer, the capsule or the stick pack. Re-esterification adds glycerol and removes ethanol, so the percentage falls by a few points while the fatty acid mass per gram of oil stays close. A 65% ethyl ester and a 62% re-esterified triglyceride can carry almost the same milligrams of EPA+DHA per gram of oil. The number to compare is the milligram figure, not the percentage on the front of the drum. ## What the form does to the powder The powder is usually made by emulsifying the oil in a starch solution and drying the emulsion. In the emulsion, the oil's viscosity and density decide the droplet size, and the droplet size decides how much oil ends up at the particle surface. Surface oil is the fraction exposed to oxygen, so it is the first thing to move when the form changes. Ethyl ester is less viscous than triglyceride and has a slightly lower density. A form switch therefore changes the emulsion, the dryer settings and the free-oil figure unless the process is redeveloped. Re-esterified triglyceride behaves closer to the natural oil, but it is a different raw material with its own oxidation history. The physical targets stay the same on paper: at least 95% through 40 mesh, free flow, dispersible in water. Whether a particular oil reaches them at a sensible oil load is a trial question, not a specification question. A concentrate that lets the formulator cut the oil load may improve flow and reduce surface oil; it may also change the taste and the colour of the dispersion. ## What the form changes in the dose At 10% EPA+DHA, one gram of powder carries 100 mg. A 500 mg capsule filled with powder carries about 50 mg, and a 3 g stick carries about 300 mg if the powder is the only source. Those figures do not change when the oil form changes, because they are set by the powder's declared assay. What changes is how much oil the powder contains to deliver them. Absorption is a separate question from content. Ethyl ester is more dependent on a meal containing fat; triglyceride and re-esterified triglyceride are less so. The difference is modest, varies between studies and narrows when the dose is taken with food. For a powder that will be dispersed in a drink or a stick, the matrix and the timing matter as much as the form, and a formulator should test the finished vehicle rather than assume the oil's behaviour carries through. ## How to write the form into the specification A form that is not written down is not controlled. The specification should identify the oil and the matrix in the same line, so that a supplier cannot change one without a document change. Specification lines that fix the omega-3 form | Line | What to write | Why it matters | Oil identity | Fish oil, species named, triglyceride or ethyl ester stated | Sets the label and the process | Omega-3 | EPA+DHA ≥10.0% (GC), EPA and DHA reported | Fixes the powder, not the oil | Oxidation | PV ≤5.0 meq/kg and p-AV ≤20.0 | Applies to the oil and the powder | Matrix | Modified starch and named antioxidant | Explains the balance of the powder | Allergen | Fish declaration and species statement | Follows the source, not the form A buyer who wants the triglyceride form on the pack can use natural triglyceride or re-esterified triglyceride, but not ethyl ester. A buyer who wants the smallest capsule for a given milligram load will look at the concentrates. The specification is where that choice becomes enforceable. ## When the form should not lead For a 10% powder sold in a capsule with no form statement on the pack, the form is a technical and labelling detail, not a selling point. It still belongs in the file: the label ingredient name has to be accurate, the allergen statement follows the fish source, and the oxidation history of the oil decides the shelf life. The form should lead only when it changes the pack: the ingredient name, the capsule size, the oil load or a claim the brand intends to print. The catalog formula describes the oil as triglycerides. The label consequences of each form are compared on the omega-3 forms page; the certificate lines are on the COA page; the product specification sits on the fish oil powder product page. The allergen rules are on the compliance page, and the tests that separate one oil from another are on the identity page. ### 03 Microencapsulated fish oil is protected, not immune; oxidation decides the shelf life URL: https://nutrition.rainwoodbio.com/products/fatty-acids/fish-oil-powder/stability/ Reviewed: 2026-11-19 Microencapsulation puts a starch wall between the oil and the air, which slows oxidation; it does not stop it. The shelf life of the powder is set by the oil's oxidation state at encapsulation, the antioxidant, the moisture and the barrier of the pack, and it is measured with peroxide and p-anisidine values, not with the EPA+DHA assay. In one lineThe wall slows the reaction; it does not remove the oxygen, the heat or the trace metals that drive it. ## The powder in a sealed pack A dry powder is not an inert one. The oil sits in droplets inside the starch wall, and a fraction of it remains at the particle surface. That free oil is exposed to the headspace from the day the pouch is sealed. Oxidation then runs slowly at ambient temperature and faster with every ten degrees added. Moisture is the other slow variable. The catalog limit is 5.0%, and the water that is present sits in the starch wall. Above a certain water activity the wall softens, the powder cakes and the oil becomes more mobile. A pouch that is opened and resealed in a humid room gains moisture over weeks, which is why the pack size should match the use rate. Temperature and time are multiplicative. A lot that measures 2 meq/kg at release can approach the 5.0 meq/kg ceiling during a warm transit or a summer in an unairconditioned store. The wall buys time, not immunity. ## Once the powder is dispersed In water, the protection changes shape. The starch wall hydrates, the particles soften and the oil droplets are brought into contact with dissolved oxygen. A beverage or a stick pack is therefore a much harsher environment than the powder in its pouch, even when the powder was stable on its own. Heat, light and pH all act at once. A pasteurisation step, a hot fill, a transparent bottle on a lit shelf and an acidic base each add to the oxidation rate. The holding time after mixing matters too: a slurry left in a tank for hours is not the same product as one filled and sealed in minutes. A dispersion is a temporary state, not a preservation method. ## What drives the reaction Oxidation drivers · what to control in a microencapsulated fish oil powder | Factor | Effect | Control | Heat | Raises the rate of hydroperoxide formation and breakdown | Cool storage; heat load in the process | Light | Photochemical oxidation at the particle surface | Opaque or metallised pack; amber bottle | Oxygen | Headspace and dissolved oxygen feed the reaction | Barrier film; nitrogen flush where available | Moisture | Softens the wall and mobilises the oil | ≤5.0% moisture; sealed pack; dry handling | Trace metals | Iron and copper catalyse hydroperoxide breakdown | Metal-free equipment; check mineral premixes | Surface oil | Exposed oil oxidises first | Encapsulation efficiency; low free-oil target | Antioxidant | Delays the rise but is consumed | Named antioxidant at a declared level The antioxidant is part of the specification, not an unspecified extra. The certificate should name it, and the stability file should show the level that was tested. An antioxidant that is adequate in the powder can be diluted or neutralised in a finished matrix. ## A stability protocol that can fail A useful study is designed to produce a failure, not to confirm a hope. Start with the lot's release values, then store samples at 40°C and 75% relative humidity for 0, 1, 2, 3 and 6 months, with a real-time arm at 25°C and 60% relative humidity and a frozen control. Measure PV, p-AV, TOTOX, moisture, EPA+DHA, microbiology and sensory at every point. The end-of-shelf-life limits should be written before the first sample is pulled. They can be the catalog release limits or tighter, but they have to be numbers. A study that measures only the assay will pass while the product becomes unacceptable, because the omega-3 content often holds while the oxidation values climb. The finished matrix needs its own arm. A powder that passes in a foil pouch can fail in a stick pack with a smaller barrier, or in a gummy with a higher water activity. Test the product as sold, in the pack it is sold in. ## What the formula adds An acidic beverage, a mineral premix, a flavour system and a heat step each change the picture. Iron and copper are the metals to watch; a fruit acid lowers pH and can hydrolyse the ester form over time; a transparent bottle lets light reach the dispersion. High shear during mixing can also damage the wall and release free oil. The practical response is to keep the powder dry until the last possible step, to control the water activity of the finished matrix, and to test the finished product rather than extrapolate from the powder. The powder's stability file is the starting point for that work, not a substitute for it. ## How the shelf life is assigned A shelf life is a claim supported by data on a grade and a pack. It is not read off the assay and it is not copied from another supplier's certificate. The file should show the release values, the storage conditions, the time points and the limit that was crossed or not crossed. A declaration of 18 to 24 months is common for a microencapsulated powder in an intact foil pack. It is not a default: the figure has to come from the stability file for that grade and that pack, and the technical data sheet states the one that applies. The 25 kg drum and the 1 kg pouch do not necessarily carry the same declaration, because their headspace and opening history differ. Storage instructions belong with the number. Cool, dry, out of direct light, and reseal after opening are the usual terms; a buyer who repacks into a clear jar should expect a shorter life than the TDS describes. Retest after any repack or long hold. The oxidation limits behind this page are on the COA page; the pack and order terms are on the MOQ page; the matrix and form questions are on the grade page. The catalog specification sits on the fish oil powder product page, and the release process is described on the quality page. ### 04 Fish oil powder: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/fatty-acids/fish-oil-powder/moq/ Reviewed: 2026-11-19 One kilogram is the minimum because a qualification trial, a micro test and a short stability check can be run from a single released lot without buying a production quantity. The powder ships in a 1 kg foil pouch or a 25 kg fiber drum, and the lead time is 1 to 7 days from stock. In one lineOne kilogram from a released lot is the qualification unit; the pack and the destination decide the rest of the order. ## Why the minimum is one kilogram The first order is a test, not a production run. A kilogram is enough for a capsule-filling trial, a dispersion trial in the intended beverage or stick pack, a flow check on the filling line and a sample in an accelerated stability chamber. Doing all of that from one lot matters, because results from different lots cannot be compared cleanly. The 1 kg unit is drawn from a released lot and travels with that lot's certificate. It is not a promotional sample and it is not a separate small batch. If the trial succeeds, the production order can be placed against the same specification, and the buyer can ask whether the same lot is still available before it is committed elsewhere. At a 2–5% inclusion rate, a kilogram supports 20–50 kg of finished powder blend, which is usually more than a bench trial needs. The limit is not the powder weight; it is the number of variables the trial can cover before the sample is used up. ## Packs and what they are for Standard packs · microencapsulated fish oil powder 10% | Pack | Net weight | Construction | Typical use | Foil pouch | 1 kg | Foil laminate, sealed | Sample, bench trial, small batch | Fiber drum | 25 kg | Fiber drum, labelled | Production run, stock holding Both packs carry the product name, the lot code, the net weight and the production and expiry dates. The lot code on the pack has to match the certificate and the retained sample; if it does not, the paperwork describes a different lot. For a 10% powder, headspace is part of the pack. Ask whether the pouch is nitrogen-flushed and what the liner is, and do not assume that a repacked jar protects the powder as well as the original pouch. A partial drum should be resealed with the liner closed and the powder kept dry; the shelf life after opening is shorter than the unopened declaration. ## Lead time and what changes it A stocked grade ships in 1 to 7 days. The clock starts when the order and the documents are agreed, not when the enquiry arrives. Custom options change the schedule: a 20% powder, an agglomerated grade or a different mesh is a production run, and the lead time has to be quoted for that run rather than assumed from the stock figure. Destination matters too. Export orders need the commercial invoice, packing list, certificate of origin where applicable, and the health or free-sale documents the market requires. A missing declaration can hold a shipment longer than production does. ## Six details a quotation needs A quotation that gives only a product name and a weight is not a quotation. Six details decide whether two offers describe the same material. - The product and grade, with EPA+DHA and the oil form stated. - The quantity and the pack: 1 kg pouch, 25 kg drum or a mix. - The destination and the Incoterm. - The market and the documents required for it. - The allergen and declaration needs: fish, species, non-GMO, halal or kosher. - Any test beyond the standard certificate: TOTOX, dioxins and PCBs, a specific carrier or antioxidant. With those six, the offer can be compared line by line. Without them, two offers may describe a different oil, a different pack or a different document set. ## Samples and the trial The 1 kg pouch is the sample unit. Ask for the lot number and the certificate with the sample, and keep a portion sealed as a reference. A sample without a lot number cannot be compared with the production order later. Test the powder in the matrix it will actually enter. Flow, dispersibility, taste and colour can all change between a water trial and an acidic beverage, and the stability of the finished product is not the stability of the powder. Record the inclusion rate, the process temperature and the pack used, so the production order can repeat them. ## Terms to settle before the order The quotation should state the minimum quantity, the pack, the lead time and the commercial terms, including payment and validity. It should also state the shelf life remaining at dispatch, the documents released with the lot and the window for claims after delivery. Retained samples, the certificate and the lot code are the evidence base if a dispute arises. Agree how long each side keeps them and which laboratory settles a disagreement. Returns and replacements are easier to handle when the acceptance tests and the claim window are written into the order rather than discussed after delivery. The certificate lines are explained on the COA page, and the market documents on the compliance page. The catalog specification sits on the fish oil powder product page; the MOQ and lead-time terms are defined in the MOQ glossary entry and the lead time entry, and the shipping process is described on the logistics page. ### 05 Where fish oil powder is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/fatty-acids/fish-oil-powder/compliance/ Reviewed: 2026-11-19 Fish oil is sold as a food and supplement ingredient in the EU, the US and the UK, so the question is not permission but what the file must show. Four checks decide a launch: ingredient status, fish allergen, contaminant panel, label and claim. In one lineFish oil is permitted in all three markets; the fish allergen, the contaminant file and the claim wording are what decide a launch. ## Four checks, four owners The first is ingredient status: whether fish oil, and the particular concentrate or powder, can be sold there. The second is the fish allergen, which follows the source, not the form. The third is the contaminant panel, measured against the product as sold. The fourth is the label and claim. The owners differ: the supplier and importer own status and source; the recipe and label own the allergen; the food category sets the limit; the brand owns the claim. The powder is an ingredient, while the finished capsule or drink is judged in its own category, and the specification should say which was tested. ## European Union Fish oil is a food ingredient with a long history of use and is not, on this review, novel. A concentrate made by a process with no pre-1997 history needs its own check; the source is not the only question. Fish is in Annex II of Regulation (EU) No 1169/2011, and there is no refined-oil exemption. Fish oil, including a microencapsulated powder, triggers the allergen declaration, emphasised in the ingredient list; the species belongs in the supplier file even if the label omits it. Contaminants are governed by Regulation (EU) 2023/915. Food supplements fall under Directive 2002/46/EC, and the regulation sets their lead, cadmium and mercury levels; fish oil also falls within the dioxin and PCB provisions for oils and fats. The result is measured against the limit for the product as sold. Health claims are governed by Regulation (EC) No 1924/2006. The authorised list has entries for EPA and DHA, each with a minimum intake and fixed wording. A claim about the oil does not transfer to a finished capsule or drink: the nutrient must be present in the product as sold, in the amount the claim requires. ## United States In a supplement, fish oil is a dietary ingredient under DSHEA. In a conventional food, the supplier should state the basis for lawful use, whether GRAS or another route. Fish is a major food allergen under FALCPA. The Act excludes highly refined oils from a major allergen, with a notification route, but the exclusion is not automatic: the supplier must show the oil is highly refined and the protein controlled. No federal maximum level applies to lead, cadmium or mercury in supplements; the purchase specification and state law decide, and California's Proposition 65 can apply on top. Its thresholds move with dose, so a lot acceptable at a low intake can need a warning at a high one. ## United Kingdom The UK applies its own retained food law. Fish remains on the 14-allergen list, and a prepacked item sold direct to the consumer must carry the allergen information on the pack under the Food Information Regulations 2014. The GB contaminant limits descend from pre-2023 Union rules and have diverged; check the current GB text rather than the EU column. The GB claims register is separate: a claim authorised in the Union is not automatically available in Great Britain, and the importer should confirm the wording before artwork. Northern Ireland follows a different route, so a UK pack has to be checked against the market it is for. ## The contaminant panel Heavy metals · supplement limits by market, as of this review | Element | EU | US | UK | Lead | 3.0 mg/kg | No federal supplement limit; state rules and Prop 65 | Check the current GB limit | Cadmium | 1.0 mg/kg | No federal supplement limit | Check the current GB limit | Mercury | 0.10 mg/kg | No federal supplement limit | Check the current GB limit | Arsenic | Not harmonised for supplements | No federal supplement limit | Check the current GB limit The catalog fixes Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg. Those are specification lines, not batch results; the certificate confirms what the lot measured. Environmental and process panel · what a fish oil file should carry beyond heavy metals | Parameter | Why it belongs in a fish oil file | Dioxins and furans | Fat-soluble environmental contaminants that concentrate in fish oil; report as WHO-TEQ | Dioxin-like PCBs | Same route, separate limit; a dioxin result alone does not cover them | PAH4 | Process and smoke-related contaminants; relevant where oil is dried or heated | Oxidation | PV, p-AV and TOTOX; a quality limit with a direct effect on shelf life | Microbiology | APC, yeast and mould, E. coli and Salmonella; a starch-based powder is a microbial matrix Dioxins and PCBs are not routine release tests. Ask for results by lot or representative period, reported as upper-bound WHO-TEQ, not a screen; the same applies to PAH4 where heat is used. ## Where the claim boundary sits None of these markets allows a disease claim on a food or supplement. In the Union, a health claim needs to be on the authorised list, with its conditions and wording; in the United States, a structure/function statement is written and owned by the brand and must be truthful and supported; in the UK, the GB register governs. Content statements are a separate regime. The EPA and DHA per serving must be true in the product as sold; the oil form is an ingredient description, not a health claim. “Triglyceride form” can be printed when it is true; it cannot be used to imply an effect. This site makes no health claim of any kind. The pack copy is the brand's decision in the market where it sells; take the authorised wording from the current register, not a supplier's draft. ## Documents in the file - Batch COA with EPA+DHA, EPA, DHA, moisture, PV, p-AV, heavy metals and microbiology. - Technical data sheet, specification and 16-section SDS, with species, oil form and carrier. - Fish allergen declaration, with species named. - Contaminant results for dioxins, PCBs and PAH4 where required. - US basis-of-sale statement where the oil is sold as a dietary ingredient. - Non-GMO, halal, kosher and residual solvent declarations where required. - Lot traceability record linking certificate, pack and retained sample. ## Before the first order - Is the oil form and species named in the specification? - Does the file support the fish declaration in every destination market? - Are heavy-metal results measured against the limit for the product as sold? - Are dioxins, PCBs and PAH4 covered by lot or by a representative period? - Does the label wording come from the current register for that market? - Is the US basis of sale stated for a dietary ingredient? - Do the lot codes on the certificate, pack and retained sample match? The catalog specification is on the fish oil powder product page; the certificate lines are on the COA page, and the identity tests on the identity page. Market summaries: EU, US, UK. ### 06 How we prove a fish oil lot is the declared omega-3 URL: https://nutrition.rainwoodbio.com/products/fatty-acids/fish-oil-powder/identity/ Reviewed: 2026-11-19 A fish oil lot is identified at four levels: the species and source, the omega-3 form, the fatty acid profile by GC, and the carrier and encapsulation. The 10% total is one line in that set; a lot can hit 10% and still be a different oil. In one lineIdentity is the species, the form, the GC profile and the carrier together; the 10% total is the last line to check, not the first. ## The four layers Four identity layers · what each one answers and where the evidence sits | Layer | Question it answers | Evidence | Source | Which fish, from where? | Species and origin statement; traceability record | Form | Triglyceride, ethyl ester or re-esterified? | Declaration; intact lipid analysis where disputed | Profile | Which fatty acids, in what proportion? | GC-FID fatty acid methyl esters; chromatogram | Matrix | What carries the oil? | Carrier and antioxidant declaration; starch identification The certificate answers the third layer well and the fourth partly. The first layer lives in the supplier file, and the second is a declaration until someone analyses the intact lipid. The CAS 8002-50-4 entry covers fish oil generally; it does not name the species, so it cannot carry the source layer on its own. Lot traceability sits across all of them. One lot code has to run through the certificate, the pack label and the sample kept on file, and the manufacturer should be named, not just the trader. ## What the GC profile shows Gas chromatography of fatty acid methyl esters separates the fatty acids by chain length and saturation. The oil is transesterified, the methyl esters are injected onto a capillary column and the flame ionisation detector measures them against a standard. AOAC 991.39 is the usual reference for encapsulated fish oils. The certificate should name the column, the standard and the quantification method. A profile is more than a total. It should report EPA, DHA and DPA separately, and it should show the other fatty acids that make up the oil: myristic, palmitic, palmitoleic, oleic and the long-chain monounsaturates. Those minor peaks are the fingerprint. A certificate that gives one EPA+DHA number and no chromatogram is asking the buyer to trust the arithmetic. Methylation also destroys the form. Once the fatty acids are converted to methyl esters, a triglyceride and an ethyl ester of the same composition look identical. The form needs a separate intact lipid analysis, and a certificate that claims to establish it from a FAME run is overstating the method. ## The EPA/DHA ratio as a fingerprint The ratio is not a specification unless the buyer writes one, but it is a fast consistency check. Natural fish oils sit in a recognisable range for their species, and a concentrate can be cut to almost any ratio the seller wants. What an EPA/DHA pattern suggests before the species file is opened | Pattern | What it suggests | EPA and DHA roughly equal | A mixed natural oil, such as sardine or a blended fish oil | EPA around 1.5 times DHA | An anchovy-type oil, the common base for 18/12 grades | DHA far above EPA | A DHA concentrate, tuna oil or an algal oil; check the source | Very high total with little DPA | A distilled concentrate rather than a natural oil Read the pattern against the declared species and the declared form. A natural anchovy oil that arrives with a 4:1 ratio is either not natural or not anchovy, and the certificate should explain which. ## Why XRD does not identify an oil X-ray diffraction reads a crystal lattice. Fish oil is a liquid at room temperature and the starch wall is largely amorphous, so a diffraction pattern of the powder says little about the oil. XRD can identify a crystalline carrier, a mineral filler or a crystalline adulterant, and it is a useful screen for those; it is not an identity test for omega-3 fatty acids. FTIR can produce a fingerprint of the oil and is useful for a quick comparison against a reference, but it does not quantify EPA and DHA. GC remains the method that separates and measures the fatty acids. A certificate that offers XRD as the identity test for fish oil is answering a different question. ## Where substitution shows up Fish oil is a commodity with a wide quality range, and the powder format makes the oil easy to dilute. The common substitutions are another oil, a lower-grade fish oil, an oxidised oil, or a form that is not the one declared. Substitution patterns and the test that catches them | Pattern | What it looks like | Test that catches it | Vegetable oil added | High linoleic or oleic acid; sterol profile changes | Full GC profile; sterol analysis | Lower-grade fish oil | Ratio drifts; DPA and minor peaks change | GC profile against a retained reference | Oxidised oil | PV or p-AV high; odour and colour change | PV, p-AV and TOTOX on the lot | Ethyl ester sold as triglyceride | Label says triglyceride; intact lipid shows esters | HPLC or GC of the intact lipids | Low omega-3 oil | More oil needed to reach 10%; flow and oxidation change | Mass balance; oil load on the TDS | Carrier overstatement | Starch level or source differs from the declaration | Starch identification; formulation audit Species substitution is harder to prove from a refined oil than from a fillet, because processing removes much of the DNA. The practical control is the supplier's traceability record plus a GC profile that is consistent with the declared species. ## How to write the identity into the specification A specification that says only "fish oil powder 10%" leaves every layer open. Write the source, the form and the matrix into the same document as the assay, so a change to any of them is a specification change. A workable line reads: fish oil from named species, triglyceride form, microencapsulated on modified starch with a named antioxidant; EPA+DHA ≥10.0% by GC; EPA reported; DHA reported; moisture ≤5.0%; PV ≤5.0 meq/kg; p-AV ≤20.0; at least 95% through 40 mesh; fish allergen declared. Each clause closes one of the four layers, and the certificate then shows which lot met it. ## Five questions for a supplier - Which species and fishing origin does the oil come from, and can you trace the lot to the refiner? - Is the oil natural triglyceride, ethyl ester or re-esterified, and where is that stated? - Can you send the GC chromatogram with EPA, DHA and DPA reported separately? - What are the PV, p-AV and TOTOX on this lot, and when was it produced? - What is the carrier, which antioxidant is used, and how is the fish allergen declared? The answers should agree with the certificate and the pack. A supplier who cannot answer the first question has not established the source; one who cannot answer the second has not established the form. The catalog specification sits on the fish oil powder product page; the certificate lines are on the COA page, the form comparison on the grade page, and the allergen and market rules on the compliance page. The separation method is described in the methods index. ### 02.1 Triglyceride, ethyl ester or re-esterified omega-3: what changes on the label URL: https://nutrition.rainwoodbio.com/products/fatty-acids/fish-oil-powder/grades/omega-3-forms/ Reviewed: 2026-11-19 The form changes three things on the pack: the ingredient name, the arithmetic between the oil and the declared EPA+DHA, and the supporting statement a brand may print. It does not change the rule that the label must declare the amount of EPA and DHA per serving. In one lineThe label declares milligrams of EPA and DHA; the form is a qualifier that has to be true, not a substitute for the number. ## What the ingredient is called “Fish oil” is the ingredient. “Omega-3 fatty acids” is the nutrient class, not the ingredient, and a label that uses it as the ingredient name is describing the wrong thing. The form adds a qualifier: fish oil, fish oil concentrate, fish oil ethyl esters or re-esterified triglyceride oil. The qualifier has to match the oil in the drum, not the oil in the marketing deck. In the European Union, Regulation (EU) No 1169/2011 requires an accurate name or a descriptive name that is sufficient for the buyer to know what the ingredient is. In the United States, the ingredient statement uses the common or usual name. Neither regime sets a separate regulatory category for the three forms. The form is a description, and a description that is false is a labelling error even when the assay is correct. Species naming is optional in many packs but common in both markets. If the pack names anchovy and sardine, the species statement has to support it. If it says only “fish oil”, the species still belongs in the supplier file, because the allergen declaration and the traceability record depend on it. ## The arithmetic between oil and label A 10% powder carries 100 mg of EPA+DHA per gram. A 500 mg capsule filled with the powder therefore carries about 50 mg, and a 3 g stick about 300 mg, before any overage or loss. Those figures come from the powder's assay; the form of the oil does not change them. The form changes the oil load behind the number. A natural triglyceride oil at about 30% EPA+DHA needs roughly one third of the powder weight as oil to reach 10%. A 60% concentrate needs about one sixth. The label still says 10%, but the powder's oil content, flow and stability file are different. When a concentrate is re-esterified, glycerol adds mass and ethanol is removed. The percentage on the oil falls by a few points while the fatty acid mass per gram of oil stays close. A 65% ethyl ester and a 62% re-esterified triglyceride can carry almost the same milligrams of EPA+DHA per gram of oil. Compare the milligram figure, not the headline percentage. ## The label in the European Union Fish oil is a permitted food ingredient, and fish is in Annex II of Regulation (EU) No 1169/2011. There is no refined-oil exemption on the Union list, so a fish oil powder triggers the allergen declaration, and the ingredient list has to emphasise it. This is a labelling duty that follows the source and does not disappear when the oil is concentrated or encapsulated. The nutrition declaration gives the amount per serving and per 100 g. EPA and DHA can be declared by name, and the amount has to be true in the product as sold. A form statement such as “triglyceride form” is voluntary; it has to be accurate, and it cannot be used to imply an effect that the authorised claim list does not permit. A concentrate produced by a process with no pre-1997 history needs a novel food check before the label is designed. The source is not the only question; the route matters as well. ## The label in the United States In a supplement, fish oil is a dietary ingredient, and the Supplement Facts panel lists the oil and its EPA and DHA in milligrams. A %DV is not established for EPA or DHA, so the panel carries the amount rather than a percentage. A structure/function statement is written and owned by the brand, and it has to be truthful and supported. Fish is a major food allergen under FALCPA. The Act excludes highly refined oils from a major allergen, with a notification route, but the exclusion is not automatic and the supplier has to be able to show the oil qualifies. A pack that declares fish is not wrong; a pack that relies on the exclusion needs the evidence. The name “fish oil ethyl esters” is a different common name from “fish oil”, and a concentrate is not automatically the same ingredient as the natural oil. The ingredient statement should follow what the supplier actually ships. ## How the three forms appear on a label What changes in the ingredient and amount lines · three omega-3 forms | Form | Ingredient line | What the number refers to | Natural triglyceride | Fish oil (species named) | Oil weight; EPA and DHA declared beneath it | Ethyl ester | Fish oil ethyl esters, or fish oil (ethyl ester) | Oil weight; the ester is part of the ingredient name | Re-esterified triglyceride | Fish oil (re-esterified triglyceride) | Oil weight; the glycerol form is a qualifier The amount line stays the same in structure: the oil, then EPA and DHA. The form does not create a new nutrient and does not change the arithmetic of the powder. It changes what the buyer is told the oil is, which is why the certificate and the specification have to agree with the pack. ## When the form changes the label decision The form leads when the pack intends to say something about it. A brand that wants “triglyceride form” on the front can use natural triglyceride or re-esterified triglyceride, but not ethyl ester. A brand that needs a smaller capsule for a given milligram load will look at a concentrate. A brand selling a 10% powder in a stick, with no form statement, can leave the form as a technical line in the specification rather than a label message. In every case, the label should be built from the certificate and the specification, not from the sales name of the oil. The form is one more line that has to be true. The form comparison is on the grade page; the certificate lines are on the COA page; the allergen and market rules are on the compliance page. The identity tests are on the identity page, and the catalog specification sits on the fish oil powder product page. ### 01 What the COA for chondroitin sulfate actually contains URL: https://nutrition.rainwoodbio.com/products/specialty/chondroitin-sulfate/coa/ Reviewed: 2026-11-19 The certificate for a chondroitin sulfate sodium lot reports appearance, identification by infrared and electrophoresis, assay by CPC titration on the dried basis, loss on drying, pH, protein, particle size, heavy metals and microbiology. Each line carries the method and the release limit. The ranges here are the catalog specification; the batch COA confirms the drum you receive. In one lineA chondroitin assay is a charge measurement, not a purity figure; the certificate has to show the standard, the drying basis and the electrophoretic profile beside the percentage. ## The certificate as a test report A certificate is readable when every row answers three questions: what was measured, which method produced the value, and which limit the lot was released against. A certificate that lists only a parameter and a pass mark cannot be compared with another supplier's document. Identity, assay and composition · chondroitin sulfate sodium | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | Infrared spectroscopy | Spectrum conforms to the reference | Identification | Electrophoresis | Principal band matches the reference standard | Assay, dried basis | CPC titration | 90.0–105.0% | Loss on drying | Gravimetric | ≤10.0% | pH (5% solution) | Potentiometry | 5.5–7.5 | Protein | Colorimetric or nitrogen determination | ≤6.0% Physical, contaminant and microbiological limits | Parameter | Method | Release limit | Particle size | Sieve analysis | ≥95% through 80 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent The two identification lines are not redundant. Infrared spectroscopy compares the functional-group fingerprint with a reference; electrophoresis separates the chains by charge and size. The assay then asks how much sulfate-bound material is present. A lot can satisfy one line and fail another. ## What the assay, protein and moisture figures measure Chondroitin sulfate sodium is a mixture of sulfated glycosaminoglycan chains, not a single molecule with one formula weight. Sulfate count and chain length vary with source tissue and extraction. The assay is reported on the dried basis because the powder holds water; an as-is result would fall as moisture rises without any change in chondroitin content. CPC titration uses cetylpyridinium chloride, a cationic surfactant that binds the anionic sulfate groups and forms an insoluble complex. The CPC consumed is measured by titration and converted to chondroitin sulfate against a standard. The result is a charge-based equivalent, not a mass purity. It depends on sulfation pattern, chain length and the standard, which is why the method line matters as much as the percentage. The 90.0–105.0% window looks wide until the method is considered. A titration against a reference can report above 100% when the lot's sulfation or chain length differs from the standard; the upper bound allows for that method behaviour rather than signalling a purer material. It is not 105% pure material. The certificate should name the standard and the titration mode so another laboratory can repeat it. Protein is residual cartilage protein that survived purification, and it is reported separately because it is not chondroitin. A high result can point to incomplete digestion or washing, and it changes colour and foaming. Loss on drying measures moisture, not chondroitin; a lot at the 10.0% ceiling is inside the specification but carries less dry matter and less room for moisture pickup in the customer's store. ## Release limit versus batch result The release limit is the boundary the lot was judged against; the batch result is what the laboratory measured on that lot. Both belong on the certificate, in separate columns, with the method beside them. A result column filled with the specification range is a copy of the gate, not a result. Infrared and electrophoresis are reported as conforms or does not conform; assay, loss on drying, pH and protein carry a measured value. Heavy metals and microbiology carry individual results or a statement that the lot was tested, with the report available. An assay of 90.2% is a pass, but three lots at 90.1–90.4% look different from three lots at 98–101%. A loss on drying of 9.8% is a pass, but it leaves little margin for a humid filling room. Read the margin, not only the verdict. ## What moves between batches Source tissue is the first variable. Bovine tracheal cartilage, porcine nasal cartilage and shark cartilage differ in the mix of chondroitin sulfate chains, and one extraction process will not produce an identical molecular-weight profile from each. Assay, electrophoretic pattern, protein level and colour can all move when the source changes, even if the specification window stays the same. Extraction and drying are the second variable. Alkali extraction, enzymatic digestion, precipitation and washing determine residual protein and low-molecular-weight material; drying determines loss on drying and can affect colour. Milling and sieving determine particle size, so a finer cut changes flow and bulk density without changing assay. One certificate is a snapshot; a drift across five lots says more than a single result near a limit. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a certificate that cannot be traced to a lot, or a disputed result. The useful panel is not a full repeat: CPC assay against a declared standard, electrophoresis against a reference, protein and loss on drying, ICP-MS for the metals and the microbiological absence tests. Ask the laboratory to report the detection limit and the reference standard with each result. A “not detected” line without a limit describes the method's sensitivity, not the sample. For electrophoresis, the report should name the gel or membrane, the buffer, the standard and the staining procedure; a band pattern without a method cannot be compared across laboratories. The ICP-MS method note and the microbiology method note describe what those panels do and do not prove. ## What to compare between suppliers Put the six lines that change the number side by side. Two quotations that agree on assay but disagree on method, standard, drying basis, protein limit, electrophoresis and TSE file are not describing the same material. Six lines to compare before two chondroitin certificates are treated as equivalent | Line | Why it changes the number | What to ask for | Source and tissue | Chain length and sulfation differ by species and tissue | Species, tissue, country of origin | Assay method and standard | CPC response depends on the reference | Method text, standard, titration mode | Drying basis | As-is and dried-basis results are not comparable | The basis printed on the certificate | Electrophoretic profile | Shows whether other glycosaminoglycans are present | Gel, buffer, standard, pattern | Protein and moisture | Both dilute the dry matter and affect stability | Results and methods, not only limits | TSE and source file | The assay cannot show species or BSE/TSE status | Declaration, origin, establishment The catalog specification sits on the chondroitin sulfate product page. The source decision is on the source comparison page; the tests that separate chondroitin from other glycosaminoglycans are on the identity page; the release workflow is on the quality page. The certificate is defined in the COA glossary entry. ### 02 Bovine, porcine or shark chondroitin: choosing a source URL: https://nutrition.rainwoodbio.com/products/specialty/chondroitin-sulfate/grades/ Reviewed: 2026-11-19 The three commercial sources are bovine cartilage, porcine cartilage and shark cartilage, and they are not interchangeable on a label or in a supplier file. All three can meet the same 90.0–105.0% assay window, but they differ in tissue, average molecular weight, BSE/TSE documentation, allergen assessment and the ingredient name the label carries. This catalog grade is bovine cartilage; the other sources are compared because a source switch changes the file. Choose the source first, then write the specification around it. In one lineThe species on the label and in the file decides the grade before the assay does; bovine, porcine and shark material carry different documentation even when the powder looks the same. ## Why the source is a grade decision Chondroitin sulfate is a family of sulfated glycosaminoglycan chains rather than one fixed molecule. The chains are extracted from cartilage, and the species and tissue determine the mix of chain lengths and sulfation patterns that end up in the powder. Two suppliers can report the same assay and still ship materials with different molecular-weight profiles, different residual protein and different colour. The source is also a document decision. A bovine lot needs a BSE/TSE declaration tied to the species, tissue and country of origin. A porcine lot needs a species declaration and, for many buyers, religious certification. A shark lot needs species identification and an allergen assessment because shark is a fish. None of those documents can be replaced by an assay result, and a source change is a new ingredient file even when the CAS number is unchanged. Finally, the source is what the customer reads. A brand that has positioned a product around a bovine ingredient cannot switch to porcine material without changing the label, the specification and possibly the customer's approval. The grade decision therefore starts with the label and the market, not with the lowest assay figure. ## Bovine, porcine and shark side by side Commercial chondroitin sulfate sodium is typically specified to the same 90.0–105.0% window on the dried basis across the three sources. What changes is the starting tissue, the molecular-weight profile and the file that travels with the lot. Three chondroitin sulfate sources · tissue, molecular weight and documentation | Attribute | Bovine | Porcine | Shark | Starting tissue | Tracheal or nasal cartilage | Trachea or nasal septum | Cartilage from fin or back | Average molecular weight | About 20–25 kDa for tracheal material | Reported ranges overlap bovine; ask for the measured value | About 50–80 kDa in reported ranges | Purified assay | 90.0–105.0% dried basis | 90.0–105.0% dried basis | 90.0–105.0% dried basis | BSE/TSE file | Species, tissue, origin and SRM-free declaration | Species declaration; pigs are not a TSE-relevant species | No BSE/TSE file; species and CITES check where listed | Allergen and religious note | Animal-derived; halal or kosher certificate where required | Animal-derived; religious certificate often decisive | Fish-derived; assess the fish allergen entry | Label name | Bovine chondroitin sulfate sodium | Porcine chondroitin sulfate sodium | Shark chondroitin sulfate sodium The molecular-weight figures are reported ranges for cartilage-derived material, not constants. Extraction, purification and drying shift the average, and a supplier that claims a molecular weight should report the method and the value on the certificate. A number copied from a source table is not a lot result. ## What the powder looks and handles like All three sources are sold as a white to off-white powder, typically with ≥95% through 80 mesh. The powder is soluble in water and the solution is viscous, which matters at the filling and blending stage more than at the label stage. Bulk density and flow vary with milling, granulation and moisture, so the same source can arrive as a free-flowing powder or as a compacting solid depending on the process. Colour and odour are useful source and purification signals. A dark or fishy lot is not a premium variant; it usually points to residual protein, incomplete washing or a drying step that ran hot. Bovine and porcine material should be low in odour, and shark material needs a tighter odour specification if the capsule shell is not sealed. A source change should trigger a fresh sensory check, not only a new assay. ## Capsules, tablets and powder sticks The dosage form decides the particle size and flow requirement. A capsule filling line wants a free-flowing 80 mesh powder with a consistent bulk density; a tablet line wants a powder that compacts without sticking, which may mean granulation rather than a finer milling cut. A powder stick or drink mix needs a powder that disperses without lumps, and the source's residual protein can affect foaming at that stage. The label decides how much powder has to fit into each unit. Chondroitin sulfate is dosed in grams, not milligrams, so the capsule count or the stick weight is a formulation constraint. That is a reason to settle the source and the mesh before the capsule size is fixed, not after the first stability batch. ## Writing the source into the specification A source-specific specification needs more than the word chondroitin. It should name the species and tissue, the salt form, the assay method and standard, the drying basis, the electrophoretic identity test, protein and moisture limits, particle size, the contaminant panel and the TSE or species declaration. If a molecular-weight range is claimed, the method and the range belong on the same line. A workable line reads: chondroitin sulfate sodium from bovine cartilage, assay 90.0–105.0% on the dried basis by CPC titration against a declared standard, identification by infrared and electrophoresis, protein ≤6.0%, loss on drying ≤10.0%, pH 5.5–7.5, ≥95% through 80 mesh, with a BSE/TSE declaration naming species, tissue and origin. The same structure works for porcine and shark material with the source line and the file changed. ## When not to switch the source Do not switch when the label, the notified formula or the customer's approval names a species. Do not switch when the destination market requires a document the new source cannot supply, or when the allergen assessment for a fish-derived material has not been completed. Do not switch on an assay certificate alone: the electrophoresis, protein and moisture results belong in the comparison. A source switch is a new ingredient file. It needs a new specification, a new COA review, a new TSE or species declaration and, where the label changes, a new artwork approval. The bovine versus porcine page narrows the comparison to the two terrestrial sources. The assay method is explained on the COA page, the identity tests on the identity page, and the market files on the compliance page. The catalog specification is on the product page. ### 03 Chondroitin sulfate is hygroscopic; the pack decides the shelf life URL: https://nutrition.rainwoodbio.com/products/specialty/chondroitin-sulfate/stability/ Reviewed: 2026-11-19 Chondroitin sulfate sodium picks up water from the air, and the water shows up first as clumping, then as a loss-on-drying result at the top of the 10.0% limit. The dry powder is not especially heat-labile, but moisture, heat and time together change colour, flow and the assay. The pack, the desiccant and the closing procedure decide how long the powder stays inside its specification. In one lineThe powder is stable while it stays dry; the pack, the headspace and the closing procedure decide the shelf life, not the drum label alone. ## Hygroscopic powder, clumping and the moisture ceiling Chondroitin sulfate sodium is hygroscopic once dried. The chains carry sulfate and carboxylate groups and a sodium counter-ion, and water binds across the powder surface and between particles. In an open bag the powder reaches equilibrium with the room, and in a humid room that equilibrium sits above the 10.0% loss-on-drying limit even when the lot was released below it. The first visible sign is flow. A powder that was free-flowing at release starts to bridge in the hopper, then forms lumps that do not disperse in a blend. The assay on the dried basis may still pass while the as-is material contains less chondroitin per kilogram, because water is not chondroitin. That is why the moisture result and the pack belong beside the assay, not in a storage note at the end. The 10.0% limit is a ceiling, not a target. A lot released at 9.5% has less dry matter and less margin than a lot at 6.0%, and it will reach the ceiling sooner in the same room. The drum liner, not the fiber drum, is the moisture barrier; a torn liner or a reopened pouch is the usual route by which a compliant lot leaves its specification in storage. ## Water is also the format problem The powder dissolves in water to a viscous solution. A liquid format therefore has two stability questions that the powder does not: whether the chain length survives heat and pH over time, and whether the water supports microbial growth. The pH window for the powder is 5.5–7.5 in a 5% solution, and a liquid formula that moves outside that window during processing is a different stability subject from the dry powder. If a liquid or gel format is planned, run the stability study in that matrix, with the preservative system and the package included. A dry-powder stability result cannot be transferred to a solution, and a solution result cannot be transferred to a capsule. The same active at the same dose can behave differently in each because water, pH and the package have changed. ## What actually moves the result Factors that change chondroitin sulfate during storage and handling | Factor | Effect | Control | Moisture | Clumping, higher loss on drying, lower dry matter per kilogram | Foil liner, desiccant, closed transfer | Heat | Colour drift, odour, possible chain shortening in solution | Controlled warehouse and short drying exposure | Light | Colour change at the surface of an open pack | Opaque pack and closed container | Oxygen | Colour and odour change in the presence of moisture | Minimise headspace, close promptly | Metal ions | Complexation and colour change | Stainless contact surfaces, contaminant panel | pH | Chain stability and solution behaviour | 5.5–7.5 in 5% solution; control the formula | Compaction | Hard caking in a drum under weight | Do not stack beyond the agreed load; use the liner Moisture is the factor that unlocks the others. A dry powder held cool and closed is the easy case; a damp powder held warm is where colour, odour and flow problems appear together. Dry the pack first, then control temperature, then control light and oxygen. ## A stability protocol for the powder A useful study starts with at least three lots, including one at the low end of the assay range and one at the high end of the moisture range. Pack each lot in the commercial pack, not in a laboratory bag: the 1 kg foil pouch and the 25 kg drum with its liner are different moisture barriers and should be studied as they are sold. Store the packs at 25°C/60% RH for long-term data, 30°C/65% RH for an intermediate condition, and 40°C/75% RH for accelerated data. Test at 0, 3, 6, 9, 12 and 24 months for the long-term condition, with at least 0, 3 and 6 months accelerated. Add a transport simulation if the material will cross a cold chain or sit in an unheated container. Test appearance, assay on the dried basis, loss on drying, pH, protein, electrophoretic profile, heavy metals where the pack could contribute them, and the microbiological panel. Record the pack integrity and net weight at each point. Set acceptance criteria before the first result, and read a result outside the criteria as a finding about the pack or the process, not as a reason to change the criteria. ## The formula and the pack In a capsule, the powder competes with the shell for water. A gelatin shell can donate or take up moisture, and a hygroscopic fill can make the capsule brittle or tacky over time. An HPMC shell behaves differently. The study should use the intended shell and fill weight, because a capsule study with a different shell does not answer the question. In a tablet, binders, disintegrants and lubricants add their own moisture and compaction behaviour. A granulated chondroitin grade may flow better and compact more evenly than a milled powder, but granulation adds a process step and a new moisture variable. In a powder stick, the foil laminate and the seal are the barrier; a poor seal fails faster than the same powder in a pouch. The commercial pack is part of the specification. The 1 kg foil pouch suits a qualification or a small batch; the 25 kg fiber drum with a inner liner suits production. If a desiccant or a nitrogen flush is required, it should be written into the order and the stability study, not assumed at the filling line. The filling room humidity belongs in the handling instructions for the same reason. ## Assigning the shelf life The shelf life is the period supported by the stability data for the commercial pack, not a property of the molecule and not a number copied from a competitor's certificate. A supplier can state a shelf life for the unopened pack; the buyer's own data supports the finished product after filling. Both statements should name the storage condition and the pack. Write the storage statement in plain terms: keep the pack closed, store away from heat and moisture, and use the material within the stated period after opening where an opening date is part of the control. A reopened 25 kg drum is no longer the pack that was studied. The COA page explains the moisture and assay lines that the study follows; the ordering page covers the pack sizes; the compliance page covers the storage statement on the label. The loss-on-drying entry defines the test. ### 04 Chondroitin sulfate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/specialty/chondroitin-sulfate/moq/ Reviewed: 2026-11-19 The minimum order is 1 kg, drawn from a released lot and packed in a foil pouch; the standard bulk pack is a 25 kg fiber drum. Lead time is typically 1–7 days for a catalog grade, and a quotation depends on the source, the mesh, the quantity, the destination and the document pack. The 1 kg unit exists so a buyer can qualify the material before committing to a drum. In one lineOne kilogram is the qualification unit, not a retail pack: it is drawn from a released lot so the sample, the COA and the scale-up drum describe the same material. ## Why the minimum is 1 kg Chondroitin sulfate is sold as a powder in two pack sizes, and the smaller one is the qualification unit. A buyer needs enough material to run the identity and assay tests, make a trial capsule or tablet batch, and keep a retained sample. One kilogram covers those steps for a typical trial and leaves a record that can be compared with the production drum. The unit also keeps the lot chain intact. A 1 kg pouch filled from a released lot carries the same lot code as the 25 kg drums from that lot, so the sample result and the production COA describe the same material. A sample repacked from a different lot, or a hand-filled bag with no lot code, breaks that chain and cannot be used to qualify the drum. The minimum is not a retail pack and it is not a free sample. It is a commercial unit with a COA, a pack label and a retained sample behind it. Buyers who need a smaller quantity for a feasibility study should ask whether a sample can be drawn from the same lot; buyers who need a larger quantity should move to the 25 kg drum rather than order multiple pouches, because the drum is the production pack and the stability file should cover it. ## Packaging and pack labels Standard packs for chondroitin sulfate sodium | Pack | Construction | Net weight | Typical use | Foil pouch | Foil laminate, heat-sealed | 1 kg | Qualification, trial batch, retained sample | Fiber drum | Fiber drum with inner liner | 25 kg | Production, scale-up, repeat ordering The liner is the moisture barrier, not the fiber wall. A drum with a torn or poorly sealed liner is an open pack in slow motion, and the powder will pick up water through it. The pack label should carry the product name, the source, the lot code, the net weight and the storage condition; the certificate and the drum label should show the same lot code. If a desiccant, a nitrogen flush or a specific liner is required, write it into the order. Those are pack options, not assumptions, and they change the stability file. The same applies to a customer-specific label or a pallet configuration: agree it before the lot is packed, because re-packing a drum is a new pack and a new risk. ## Lead time and what starts the clock The catalog lead time is 1–7 days for a released lot in the standard pack. The clock starts when the order, the specification and the document pack are agreed, not when the first email arrives. A query that names the source, the mesh and the destination can be quoted and scheduled in one step; a query that leaves those open has to wait for the answers. A source change, a new mesh, a granulated grade or a customer-specific pack adds time because the lot has to be produced or re-packed and the COA has to be issued against the new specification. Shipping time is separate from lead time, and the Incoterm decides where the supplier's responsibility ends. Ask for the dispatch date and the estimated arrival date as two different lines. ## The six details a quotation needs A quotation is only comparable when it describes the same material. These six details turn an inquiry into a quotation that can be checked against another supplier's. Six details to include in a chondroitin sulfate inquiry | Detail | What to state | Why it matters | Product and source | Chondroitin sulfate sodium; this catalog grade is bovine cartilage | Source changes the file, the label and the molecular weight | Grade and mesh | Powder at 80 mesh, granulated or milled to a finer cut | Flow, compaction and capsule fill depend on it | Quantity and pack | 1 kg pouch or 25 kg drum; number of units | The pack is part of the stability file | Destination and Incoterm | Country, port or door, and the agreed trade term | Documents and shipping responsibility follow the destination | Documents | COA, TDS, BSE/TSE or species declaration, allergen statement | The file has to match the market and the customer's audit | Handling | Desiccant, nitrogen, liner or customer label | Pack options change the specification and the lead time A quotation that does not ask these questions is a quotation for an unspecified material. The COA page shows which results should come with the lot, and the compliance page lists the documents a regulated market may ask for. ## Samples and qualification A sample should be drawn from a released lot and accompanied by that lot's COA. Test it for identity, assay, loss on drying and protein at minimum, and compare the results with the certificate. If the sample passes, the production drum from the same lot is the scale-up material; if it fails, the failure is information about the lot, not a reason to request a different sample until one passes. Keep a portion of the sample under the same storage condition as the production pack. A sample kept in a desk drawer is not a retained sample, and a result from it cannot be compared with a drum that was stored correctly. The 1 kg pouch is large enough to split into a test portion and a retention portion, which is one reason it is the minimum unit. ## Terms that belong in the order The quotation and the order confirmation should name the product, source, grade, pack, quantity, Incoterm, payment terms, document pack and delivery window. They should also state the retention period for the lot sample and the window for a quality claim after receipt. A technical file that is promised in an email but not listed in the order is easy to lose when the shipment is arranged. Storage and handling terms belong in the same document. The buyer should confirm who is responsible for the pack after arrival, how a partially used drum is closed, and what happens if the liner is damaged in transit. Those are commercial and quality terms, not technical footnotes. The stability page explains why the pack matters; the product page carries the catalog specification; the MOQ glossary entry and the lead-time entry define the two terms most often used loosely. ### 05 Where chondroitin sulfate is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/specialty/chondroitin-sulfate/compliance/ Reviewed: 2026-11-19 Chondroitin sulfate sodium is a food supplement ingredient in the EU and the UK and a dietary ingredient in the US, but each market asks a different question. The EU and UK apply food-supplement and TSE rules; the US applies DSHEA. In all three, the file must show the species and tissue, the BSE/TSE status, the contaminant results, the label wording and the absence of a disease claim. In one linePermission to sell the ingredient, the TSE file, the contaminant ceiling, the label and the claim are five separate checks, and each market answers them in its own instrument. ## Four checks, one file The checks are ingredient status, animal by-product and TSE status, the contaminant panel, and the label and claim. A supplier certificate supports all four, but the operator placing the product on the market remains responsible for the assessment. ## European Union Directive 2002/46/EC harmonises food supplements and sets a positive list of vitamins and minerals and their permitted forms. Chondroitin sulfate is neither, so the Annex II route does not apply; it is placed under general food law with the supplement labelling particulars. The operator still has to show that the ingredient is safe and lawfully used. Animal-derived material brings Regulation (EC) No 999/2001 into the file. Bovine cartilage is not a specified risk material, but the lot still needs a declaration of species, tissue, country of origin and establishment, and a statement that the material is SRM-free and comes from animals fit for human consumption. Imports of highly refined chondroitin sulfate for food are also subject to the third-country listing in Regulation (EU) 2021/405, so the origin has to be on the approved route as of this review. Contaminants are governed by Regulation (EU) 2023/915: for food supplements, lead is 3.0 mg/kg, cadmium 1.0 mg/kg and mercury 0.10 mg/kg. There is no harmonised EU maximum level for arsenic, so a buyer who wants that limit writes it into the specification. Labelling follows Regulation (EU) No 1169/2011 and the supplement particulars: ingredient list, amount per portion, durability date, storage condition and the allergen statement for a fish-derived source. Claims are governed by Regulation (EC) No 1924/2006 and the authorised list in Regulation (EU) No 432/2012. As of this review, the EU register does not carry an authorised claim for chondroitin sulfate. The brand cannot fall back on a generic wording that was never assessed for this ingredient. ## United States In the US, chondroitin sulfate is marketed as a dietary ingredient under the Dietary Supplement Health and Education Act. FDA does not approve dietary supplements or their ingredients before sale, but the product must be made under the dietary supplement cGMP in 21 CFR 111, labelled with a Supplement Facts panel, and covered by the serious adverse-event reporting that applies to the firm. The ingredient basis and source belong in the supplier file even when the label does not show them prominently. Structure/function claims are allowed if they are truthful, not misleading, substantiated and accompanied by the required disclaimer; a claim that names a disease is a drug claim and is not allowed. As of this review, there is no FDA-approved health claim for chondroitin sulfate. State law can add a layer: California's Proposition 65 applies its own lead threshold to supplements, so a product that meets the federal framework can still need a warning or a reformulation. Imports add prior notice and foreign supplier verification. Check the first shipment against the importer's FSVP file, not only the supplier's certificate. The source declaration, the TSE statement for bovine material and the allergen assessment for shark material are the documents most often missing. ## The contaminant and source limits Contaminant and TSE checks by market · food supplements | Check | EU | US | UK | Lead | 3.0 mg/kg | No federal limit; state law may apply | 3.0 mg/kg | Cadmium | 1.0 mg/kg | No federal limit | 1.0 mg/kg | Mercury | 0.10 mg/kg | No federal limit | 0.10 mg/kg | Arsenic | No harmonised limit; buyer specification | No federal limit | No harmonised limit; buyer specification | Microbiology | Buyer specification; HACCP-based controls | cGMP; buyer specification | Buyer specification; food safety controls | TSE / BSE | Regulation 999/2001 file | Species and source file | Retained 999/2001 file The catalog limits for this grade are Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg. Those figures sit at or inside the EU and UK ceilings; the arsenic line is a buyer-set limit rather than a harmonised one. A certificate that reports only “conforms” does not let the buyer compare the lot with the regulation, so ask for the individual results. ## Where the claim boundary sits No market allows a claim that names a disease or a symptom, or a claim about the course of a disease. The EU and UK allow only claims on the authorised register, which has no entry for chondroitin sulfate as of this review. The US allows a structure/function claim with the disclaimer, but the claim must be truthful and substantiated and cannot cross into a disease claim. A statement about a body system is still a claim and needs its own support. The label should describe the ingredient, the amount per portion and the source, and it should not borrow a claim from another ingredient or market. A wording acceptable in a US structure/function context is not automatically acceptable in the EU, and a claim assessed for another salt or source is not transferable. ## The document pack Documents a chondroitin sulfate file should contain | Document | What it shows | When it is needed | Batch COA | Assay, identity, moisture, protein, contaminants, micro | Every lot | Specification / TDS | The release ranges and the methods | Every supplier qualification | BSE/TSE declaration | Species, tissue, origin, SRM-free status | Bovine material; customer audit | Species and origin statement | Bovine, porcine or shark; country of origin | Every lot, all markets | Allergen assessment | Fish entry for shark; animal-derived status | Shark material; EU/UK label | Manufacturing flow | Extraction, purification, drying, milling | New source; audit | Residual solvents statement | Solvents used in precipitation and washing | New source; customer request | Halal or kosher certificate | Religious status of the source and line | Where the market requires it | Certificate of origin | Country of manufacture and export | Import and customs ## Before the first shipment - Check that the species and tissue agree across COA, label and declaration. - Check the BSE/TSE declaration for bovine material, including origin and SRM-free status. - Check the EU import route for highly refined chondroitin sulfate. - Compare individual heavy-metal results with the EU, UK or customer limits, not only “conforms”. - Complete the allergen assessment for a shark-derived source and reflect it on the label. - Check the claim wording against the EU register or the US structure/function rules. - Keep a retained sample tied by lot code to the certificate and drum. The market notes are maintained on the EU regulatory page, the US regulatory page and the UK regulatory page. Batch lines are explained on the COA page, the source decision on the source comparison page, and identity tests on the identity page. This is a sourcing reference, not legal advice; check the current text before the label is finalised. ### 06 How we prove a chondroitin sulfate lot is chondroitin URL: https://nutrition.rainwoodbio.com/products/specialty/chondroitin-sulfate/identity/ Reviewed: 2026-11-19 Identity is established in four layers: the source and species file, the CPC assay against a matched standard, the electrophoretic profile against a reference, and the composition checks — protein, moisture, pH and contaminants. A lot can pass the assay and still be the wrong glycosaminoglycan, a lower-molecular-weight fraction or a diluted powder. In one lineThe assay says how much sulfate-bound material is in the flask; only the source file, the electrophoresis and the composition data say that the material is chondroitin. ## The four layers of identity Identity is a conclusion from independent evidence. Four identity layers for chondroitin sulfate sodium | Layer | Evidence | Question it answers | Source | Species, tissue, origin and BSE/TSE or species declaration | Is the material from the animal and tissue named? | Assay | CPC titration on the dried basis | How much sulfate-bound material is present? | Electrophoresis | Band pattern against a reference standard | Is the principal band chondroitin sulfate, and what else is visible? | Composition | Protein, loss on drying, pH and contaminants | Is the powder diluted, wet or carrying purification residues? The layers are not interchangeable. A source declaration can be accurate and the powder still diluted. An assay can pass and the band pattern still show a second glycosaminoglycan. A clean pattern can coexist with water near the ceiling. The file is complete only when the four agree. ## CPC titration: a charge ratio, not a purity percentage CPC titration uses cetylpyridinium chloride, a cationic surfactant that binds the anionic sulfate and carboxylate groups of the glycosaminoglycan chain. The insoluble complex is the basis of the assay: the CPC consumed is titrated and converted to chondroitin sulfate against a standard of known response. That conversion is why the result is a charge-based equivalent. The response depends on the anionic sites per chain and on chain length, so a standard with a different molecular-weight profile gives a different number for the same mass. The supplier should name the standard and titration mode; a buyer comparing certificates should check both used a comparable reference. The 90.0–105.0% window follows from that method. A lot with a different sulfation pattern or chain length can read above 100% against the standard without containing 105% chondroitin by mass. The figure is a release window for a charge assay, not a purity statement. A low-molecular-weight fraction can read like a higher-molecular-weight material if the standard is chosen loosely. ## Electrophoresis: the band pattern against a reference Electrophoresis separates glycosaminoglycan chains on a gel or membrane by charge and size, and compares the bands with a reference standard run on the same plate. The principal band should migrate to the same position as the standard. A second band at a different distance is evidence of another glycosaminoglycan, and a smeared pattern is evidence of a broad or degraded chain population. The method is an identity and pattern test, not a quantitation: it does not say how much of each band is present and does not replace the assay. It answers a question the assay cannot: whether the material is chondroitin sulfate or a mixture that happens to titrate to the same number. The report should name the support, buffer, standard and staining procedure; a pattern without a method cannot be compared across laboratories. ## Protein, moisture and pH Protein is residual cartilage protein that survived purification, and the specification caps it at 6.0%. A high result is not extra chondroitin; it dilutes the powder, can affect colour and foaming, and may carry the antigenic signature of the source tissue. A low result is one sign that the digestion and washing steps did their job. Loss on drying is capped at 10.0% and measures moisture, not chondroitin. A lot at the ceiling carries less dry matter per kilogram and has less margin before it clumps in a humid room. pH is specified at 5.5–7.5 in a 5% solution and picks up residual acid or alkali, which can affect stability. None of these proves identity alone, but a wet, protein-rich powder outside the pH window is not the same material as a compliant lot. ## Why XRD is not a chondroitin identity test Chondroitin sulfate sodium is a hygroscopic polymer without a sharp powder pattern: the scan is a broad halo, not peaks that can be matched to a reference. XRD cannot separate chondroitin from dermatan or heparan sulfate, cannot measure the sulfation pattern the CPC assay depends on, and cannot see a low-molecular-weight fraction. Identity rests on the source file, CPC titration against a declared standard, electrophoresis and composition data. XRD has a narrow screening role for crystalline adulterants such as sodium chloride, which show sharp peaks against the halo, but a low level may sit below detection. It is a support test, never an identity line. ## The adulteration routes to test for Common ways a chondroitin lot can pass one test and fail identity | Route | What it does to the certificate | How to catch it | Other glycosaminoglycans | Dermatan, heparan or hyaluronic material titrates and stains | Electrophoresis against a reference; composition pattern | Low-molecular-weight fraction | Assay response shifts with chain length | Declared molecular weight; matched standard | Salt or sodium chloride | Adds mass without adding chondroitin | Assay on dried basis; pH and conductivity check | Maltodextrin or sugar | Dilutes the powder and lifts the moisture | Assay, protein, electrophoresis; carbohydrate profile | Protein filler | Adds mass and lifts the protein result | Protein result and electrophoresis | Undeclared source | Same assay, different species and file | Species declaration; DNA or species-specific test No route is caught by a single test. The practical screen combines assay against a declared standard, electrophoresis, protein and moisture, and a source declaration that matches the label. Run it before the lot is accepted, whatever the commercial terms. ## Writing identity into the specification Write the identity block so a laboratory can reproduce every line: species and tissue, salt form, assay method and standard, drying basis, electrophoretic method and reference, protein and loss-on-drying limits, pH, particle size and the contaminant panel. If a molecular-weight range is part of the claim, the method and range belong on the same line. A workable set: chondroitin sulfate sodium from bovine cartilage; assay 90.0–105.0% on the dried basis by CPC titration against a declared standard; identification by infrared and electrophoresis against a reference; protein ≤6.0%; loss on drying ≤10.0%; pH 5.5–7.5 in 5% solution; ≥95% through 80 mesh; heavy metals and microbiology to the listed limits. Replace the source line for porcine or shark material; shark also needs the fish allergen assessment. ## Five questions for a chondroitin supplier - Which species and tissue is the lot from, and what is the country of origin? - Which standard and titration mode were used for the CPC assay, and what molecular-weight range does the standard represent? - Which electrophoresis support, buffer and reference standard were used, and can you send the band pattern? - What were the protein and loss-on-drying results for this lot, and which methods produced them? - Has the lot been screened for other glycosaminoglycans, and does the source declaration match the label? The COA page shows how those answers appear, the source page compares the three sources, and the compliance page sets out the market file. The product page carries the catalog specification; the methods index covers the contaminant and microbiology panels. ### 02.1 Bovine vs porcine chondroitin: source, file and the label URL: https://nutrition.rainwoodbio.com/products/specialty/chondroitin-sulfate/grades/bovine-vs-porcine/ Reviewed: 2026-11-19 Bovine and porcine chondroitin sulfate share the same CAS number and the same 90.0–105.0% assay window, but they are different label ingredients and different supplier files. The choice turns on the species and tissue declaration, the BSE/TSE file, the allergen and religious documentation, and the customer's label. Neither source is a drop-in substitute for the other without a document review. In one lineThe assay cannot tell bovine from porcine; the species declaration, the TSE file and the label can, and those are what a source switch changes. ## Two species, one ingredient name Bovine chondroitin sulfate is extracted from tracheal or nasal cartilage; porcine material comes from the trachea or the nasal septum. This catalog grade is bovine; porcine material is compared here because a buyer may be offered either. Both are purified to the sodium salt and sold as a white to off-white powder, typically with ≥95% through 80 mesh. The chemical family is the same, which is why the CAS number and the assay method are the same, but the starting tissue and the chain population are not. The species is a separate specification line because it is not visible in the assay. A certificate that reports a passing chondroitin sulfate assay on the dried basis says nothing about whether the chains came from cattle or pigs. The species has to be declared in the specification, the COA and the source file, and the label has to carry the name the brand intends to use. ## Bovine and porcine side by side Bovine and porcine chondroitin sulfate · what changes between the two sources | Attribute | Bovine | Porcine | Starting tissue | Tracheal or nasal cartilage | Trachea or nasal septum | Average molecular weight | About 20–25 kDa for tracheal material | Reported ranges overlap bovine; ask for the measured value | BSE/TSE file | Species, tissue, origin and SRM-free declaration | Species declaration; pigs are not a TSE-relevant species | Allergen note | Animal-derived; not a dairy ingredient | Animal-derived; not a dairy ingredient | Religious documentation | Halal or kosher certificate where required | Halal or kosher certificate often decisive | Label name | Bovine chondroitin sulfate sodium | Porcine chondroitin sulfate sodium The molecular-weight figure is a reported range, not a species constant. Extraction and drying shift the average, and a supplier that claims a molecular weight should report the method and the lot value. The two sources can overlap in molecular weight, so the number alone does not identify the species. ## The BSE/TSE and species file Bovine material carries the heavier file. The supplier should declare the species, the tissue, the country of origin and the establishment, and state that the cartilage is not a specified risk material and comes from animals fit for human consumption. The declaration should also describe the processing that reduces the TSE risk, and it should be traceable to the lot, not issued as a generic company statement. Porcine material does not carry a BSE/TSE declaration in the same sense because pigs are not a TSE-relevant species, but it still needs a species declaration and a statement on ruminant cross-contact. A porcine line that also handles bovine material needs a cleaning and segregation statement. For both sources, the species declaration, the COA and the drum label should carry the same lot code, and the certificate should name the tissue, not only the species. Both are sold under the same food-supplement framework in the EU and UK and the same DSHEA framework in the US; the source file is what changes. ## Allergen and religious documentation Neither source is a dairy ingredient. Bovine cartilage is not milk, and a milk allergen statement does not apply simply because the material comes from cattle. Both sources are animal-derived, so a label that describes the product as vegan or vegetarian is wrong. The allergen assessment should name the species and the tissue, and it should say whether any processing aid or carrier introduces an allergen. Religious documentation is a separate file. A halal or kosher certificate covers the source, the line and the cleaning regime, and it is often the deciding document for a porcine lot. A generic “animal-derived” statement is not enough for a customer who needs a religious certificate. Ask for the certificate that covers the actual production site, not a group-level document. ## What the label has to say The ingredient name should identify the salt and, where the brand declares it, the species. “Chondroitin sulfate sodium” is the chemical name; “bovine chondroitin sulfate sodium” or “porcine chondroitin sulfate sodium” is the source-specific name. In the US, the Supplement Facts panel lists the ingredient and the amount per serving; in the EU and UK, the ingredient list carries the name and the source declaration the brand chooses to make. The species is not always mandatory in the ingredient name, but the buyer's specification and the brand's own label should declare it, because a source change is an artwork change. The label also carries the allergen statement where one is needed, the storage condition and the durability date. A source switch that leaves the old artwork in place is a labelling error even when the powder is compliant. ## When to choose bovine, and when porcine Choose bovine when the market or the customer expects a bovine ingredient, when the BSE/TSE file is complete and traceable to the lot, and when the label already names the bovine source. Choose porcine when the customer accepts a porcine ingredient, when the religious certificate is available for the site, and when the porcine supply chain is the more stable route for the grade. Neither choice is settled by the assay percentage. Choose neither when the label must be free of animal-derived material, when the customer's allergen or religious policy excludes the species, or when the destination market's import route cannot be documented for that source. In those cases the answer is a different ingredient or a different source, not a certificate with the species left blank. ## What a source switch changes A source switch is a new ingredient file, even when the CAS number and the assay are unchanged. The specification, the COA review, the BSE/TSE or species declaration, the allergen assessment, the religious certificate, the label artwork and the customer notification all move together. The stability data should be reviewed as well, because the molecular-weight profile and the moisture behaviour can differ. - The species and tissue line in the specification and on the COA. - The BSE/TSE declaration for bovine material, or the species and cross-contact statement for porcine material. - The allergen assessment and any religious certificate. - The ingredient name and the source declaration on the label. - The retained sample and the customer's approval record. The wider comparison is on the source comparison page. The assay method is on the COA page, the identity tests on the identity page, and the market file on the compliance page. The catalog specification is on the product page. ### 01 What the COA for CLA powder actually contains URL: https://nutrition.rainwoodbio.com/products/fatty-acids/cla-powder/coa/ Reviewed: 2026-11-19 A CLA powder certificate is a report on the powder as sold, not on the oil inside it. It should give total conjugated linoleic acid by GC, the distribution of the main isomers, the oil load, moisture, peroxide value, p-anisidine value, particle size, heavy metals and microbiology, each with a method and a release limit. The figures here are catalog limits; the batch COA is the record for one lot. In one lineA CLA certificate has to report the total CLA by GC, the isomer distribution, the oil load and the oxidation values, not a single 10% figure. ## The certificate as a test report Each line needs the parameter, the method, the release limit and the result. A parameter without a method cannot be repeated; a limit without a result is a specification; a result without a basis can be read two ways. The header should name the product, grade, lot, dates, specification and releasing site. This product is a powder, so every result also depends on how the oil was recovered from the starch. The certificate should say whether the CLA and the oxidation values were measured on the powder or on the extracted oil, and which extraction was used. Identity, assay and quality limits · microencapsulated CLA powder 10% | Parameter | Method | Release limit | CLA (total) | GC of fatty acid methyl esters | ≥10.0% | Isomer distribution | GC, c9,t11 and t10,c12 integrated separately | Reported for the lot | Oil load | Calculated from the extracted fat | Reported for the lot | Moisture | Gravimetric loss on drying | ≤5.0% | Peroxide value | Titrimetric, on a stated basis | ≤5.0 meq/kg | p-Anisidine value | Spectrophotometric | ≤20.0 | Particle size | Sieve analysis | ≥95% through 40 mesh | Heavy metals | Elemental analysis, ICP-MS or ICP-OES | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent The c9,t11 and t10,c12 isomers sit close together, and a short column or a loose method can merge them, or merge one with linoleic acid. The certificate should name the column, the detector, the isomer standards and the integration. ## What the 10% figure measures The 10.0% is the mass of conjugated linoleic acid in the powder, expressed as the sum of the conjugated isomers, on the powder as sold unless the certificate states another basis. It is not the oil load. The oil is a mixture of CLA isomers and other fatty acids, so the oil load is higher than the CLA figure; a 10% CLA powder can carry a substantially larger percentage of oil. The balance is the non-CLA part of the oil, the modified starch carrier, the antioxidant, moisture and minor solids. That mass balance is the first arithmetic check. CLA content equals oil load multiplied by the CLA concentration of the oil. A 10% CLA result with an oil load barely above 10% would describe an oil that is almost pure CLA, which a commercial oil is not. Ask for both figures and do the multiplication. The extraction is part of the result: the oil is locked in the starch, and the laboratory has to break the matrix without losing or oxidising it. The certificate should describe the preparation. The total is also not the isomer ratio: two powders can both report 10.0% while carrying different proportions of c9,t11 and t10,c12. ## Release limit versus batch result The release limit is the gate the lot had to pass; the batch result is what the laboratory measured. They belong in separate columns, next to the method. A result column filled with the limit range is a copy of the gate, and a line that says “conforms” is a conclusion, not a measurement. Peroxide value is where the basis matters most. The catalog limit is written as meq/kg, and for a 10% powder that number can be read per kilogram of powder or per kilogram of extracted oil. The two differ by roughly the oil load, so a value that looks low on the powder can be high on the oil. Ask which basis is used, and keep the same basis when comparing suppliers. AOCS Cd 8b-90 and ISO 3960 are the usual titration references; the certificate has to state which one was used. The p-anisidine value measures secondary oxidation products, mainly aldehydes, and it is dimensionless. It rises later than the peroxide value, so a lot with a low peroxide value and a high p-anisidine value has already been through an oxidation episode. Read the two together, against the storage history. The method is commonly AOCS Cd 18-90 or an equivalent. ## What moves between lots The CLA figure moves with the oil, the oil load and the encapsulation efficiency. A different oil batch brings a different isomer ratio and a different minor fatty acid profile; a change in the starch or the emulsion brings a different oil load; a change in drying or milling moves the moisture and the particle size. The certificate is a record of all three, not only the assay. The oxidation values move with the oil's history and with the process. Heat in the drier, oxygen in the emulsion, trace metals from the equipment and light during handling all push the peroxide value up. Surface oil — the fraction that sits outside the starch wall — is the most exposed part, and it is not a standard line on the catalog certificate. Ask for surface oil as an additional test if oxidation is critical. ## When to send a lot out Order an independent test for a new oil source, a first shipment into a regulated market, a disputed result, or a label that names an isomer ratio. The useful panel is targeted: total CLA and the isomer distribution by GC, with a chromatogram and the standards named; peroxide and p-anisidine values by a named method on a stated basis; moisture; heavy metals by ICP-MS; microbiology; and a fatty acid and sterol profile if dilution with another oil is suspected. Ask for the limit of quantification and the raw peak areas. ## Six lines to compare between suppliers Six lines that decide whether two CLA quotations describe the same powder | Line | What to ask for | What it separates | Grade and identity | 10% or 20%, source oil, CAS and product name | Two powders sold under one name | CLA result | Lot result, GC method, column and standard | A measured lot from a copied specification | Isomer ratio | c9,t11 and t10,c12, with the basis | A declared ratio from an unstated one | Oil load and carrier | Oil load, starch source, antioxidant | Different fill weight and label | Oxidation | PV and p-AV, method and basis | A fresh oil from an aged one | Lot trace | Same lot code on COA, pack and retained sample | A certificate that belongs to another lot The catalog specification sits on the CLA powder product page. The concentration options are compared on the grade page, and the tests that separate CLA from another oil are on the identity page. The certificate terms are defined in the COA glossary entry, and the elemental panel is explained in the ICP-MS method note. ### 02 CLA 10% or 20%: choosing a powder grade URL: https://nutrition.rainwoodbio.com/products/fatty-acids/cla-powder/grades/ Reviewed: 2026-11-19 The catalog grade is a 10% CLA powder at 40 mesh; a 20% nominal grade and an agglomerated version are available on request. Moving to 20% halves the powder needed for a given CLA figure, but it also roughly doubles the oil the starch has to hold, which changes flow, dispersion and the oxidation load. The grade is a specification decision before it is a label decision. In one lineThe grade sets how much oil the starch has to carry, and the oil load decides the powder weight, the flow and the oxidation risk. ## Why there is more than one grade A microencapsulated CLA powder is a starch matrix holding oil droplets. Two numbers describe it: the CLA content on the certificate and the oil load, the total oil the matrix carries, of which CLA is only a part. A 10% CLA powder therefore carries more than 10% oil. Change either number and you have a different powder, even when the product name looks the same. The 10% grade at 40 mesh is the standard because it is the easiest to dry, mill and blend. A 20% grade concentrates the oil, so less powder carries the same CLA, but the matrix has more oil to hold and less starch per gram to protect it. An agglomerated grade keeps the CLA content of its base powder and changes the particle size, wetting and dust. These are three process routes, not one product with three labels. Each needs its own specification, certificate and stability file. ## 10%, 20% and agglomerated side by side What changes across CLA powder grades | Line | 10% at 40 mesh (catalog) | 20% nominal (on request) | Agglomerated (on request) | CLA by GC | ≥10.0% | 20% nominal; range agreed | As the base grade | Powder per 100 g CLA | 1,000 g | About 500 g at 20% nominal | As the base grade | Oil load | Higher than the CLA figure; ask for the value | Higher again; ask for the value | As the base grade | Particle size | ≥95% through 40 mesh | Agreed for the grade | Agglomerated; size agreed | Flow and dust | Free-flowing; some dust | More oil; check caking and flow | Low dust; wets quickly | Oxidation check | PV, p-AV, moisture | PV, p-AV, surface oil | PV, p-AV after agglomeration | Typical format | Capsules, sticks, blends | Compact capsules, small sticks | Stick packs, drink mixes | Specification | Catalog limits | Written for the grade | Written for the grade The arithmetic is the first check. At a 500 mg CLA label figure, a 10% powder needs 5 g and a 20% grade about 2.5 g; at 1 g CLA, 10 g and about 5 g. The 10% grade is often the right choice for a stick or a blend where powder weight is not tight; the 20% grade is the choice when the fill weight is tight, provided the matrix can hold the oil and the oxidation data support it. The second check is the label. The carrier and the antioxidant are ingredients and have to be declared, and the oil load drives the fat figure in the nutrition declaration. A grade with more oil per gram of CLA puts more fat into every serving. If the label figure is built around powder weight rather than CLA weight, a grade change can move the declared CLA without changing the serving size. ## What the powder does on the line The catalog mesh is 40, about 425 µm. At least 95% of the powder passes that sieve, so the grade is a coarse powder rather than a fine flour. Coarse particles flow better and dust less; finer particles disperse faster but can hang in a hopper and cloud a room. The mesh travels with the grade and should be written into the specification, not left as a note. A higher oil load makes the powder more cohesive and more likely to cake. Oil can migrate to the particle surface, where it is exposed to oxygen and feels greasy. That surface oil is not a standard line on the catalog certificate, but it is the first thing to ask about when a 20% grade is proposed for a long shelf life. Bulk density, flow and wettability are also not on the certificate; ask for them on the grade you will receive. The powder is dispersible in water, not soluble. In a stick or a drink mix it clouds the liquid and can ring the glass; in a capsule or tablet the powder is shielded from water, and the grade question becomes fill weight and flow. Agglomeration improves wetting and reduces dust, but adds a process step and its own particle-size specification. ## Matching the grade to the dosage form Capsules are limited by fill weight. A 500 mg capsule of a 10% powder carries about 50 mg CLA; the same capsule of a 20% powder carries about 100 mg. If the label figure cannot be reached inside the capsule, the grade or the format has to change. Tablets add compression: a high oil load can soften the tablet and express oil onto the punch, so a 10% grade is often easier to compress than a 20% one. Sticks and drink mixes have more room. A 5 g stick of a 10% powder carries about 500 mg CLA, which is a normal powder weight for a stick; a 20% grade would halve the powder and leave room for other ingredients. The trade-off is dispersion and taste: more oil per gram can make the powder harder to wet and more noticeable in a clear drink. ## How to write a grade specification Write the grade as a full identity: “Microencapsulated CLA powder, 10% total CLA by GC, isomer ratio declared, oil load declared, carrier modified starch with antioxidant, ≥95% through 40 mesh, moisture ≤5.0%, peroxide value ≤5.0 meq/kg, p-anisidine value ≤20.0, heavy metals and microbiology as listed.” A 20% or agglomerated grade gets its own CLA range, oil load, mesh and oxidation limits; do not copy the 10% limits across. Name the source oil and the antioxidant, not only the carrier class. The starch can come from different botanicals, and the antioxidant can be tocopherols, rosemary extract or ascorbyl palmitate; each has its own label and allergen consequences. Ask for the certificate on the exact grade and lot. A 10% certificate does not describe a 20% powder, and a milled certificate does not describe an agglomerated one. The COA page lists the certificate lines, the stability page covers the oxidation data a grade change needs, and the isomer page explains why the ratio is a separate decision from the percentage. ## When a different grade is the wrong answer If the formula needs a clear solution, no CLA powder grade will deliver it; the ingredient is a dispersion. If the label names one isomer, changing the percentage does not fix the ratio. If the capsule is already at its fill limit, a lower grade makes the problem worse, and a higher grade may not fit the oil load the matrix can protect. The catalog specification, packs and MOQ are on the CLA powder product page; mesh size is defined in the particle-size glossary entry. ### 03 Microencapsulated CLA is protected, not immune; oxidation decides the shelf life URL: https://nutrition.rainwoodbio.com/products/fatty-acids/cla-powder/stability/ Reviewed: 2026-11-19 The starch wall limits the CLA oil's contact with oxygen and light; it does not stop heat. A powder can pass its 10% assay while its peroxide value climbs, so shelf life is set by the oxidation figures, the moisture and the pack, not by the assay. The stability file has to show the powder in its commercial pack, at stated conditions, for the period claimed. In one lineMicroencapsulation slows oxidation; it does not stop it, so the shelf life is set by the peroxide and anisidine values, not by the CLA assay. ## The dry powder is the protected state In the dry powder, the oil sits in droplets inside a starch matrix, and the matrix limits the oil's contact with air. That is a barrier, not a seal. Oxygen permeates the starch and the pack, and the oil at the particle surface is already exposed before the powder is opened. Moisture matters because water softens the matrix, promotes caking and can carry oxygen and metals into the oil phase. The catalog moisture limit is ≤5.0%; water activity tells you more about caking and stability than the moisture percentage alone. Free oil, or surface oil, is the fraction outside the wall. It oxidises first and it is not a standard line on the catalog certificate. A powder can meet its peroxide limit on release and still have a high surface-oil fraction that shortens the usable life in a warm warehouse. Ask for surface oil, bulk density and water activity when the formula is sensitive to oxidation or when the powder will be stored in a warm climate. Caking is a physical failure: absorbed moisture can form lumps that no longer disperse even when the CLA and peroxide results pass. ## Once dispersed, the protection is gone The powder is dispersible, not soluble. In water, the starch matrix hydrates and the oil droplets are exposed to a water phase, dissolved oxygen and any metal ions in the mix. Oxidation that was slow in the dry powder accelerates in a slurry or a beverage. A drink mix should be consumed soon after preparation, and a wet slurry should not be held in a tank over a shift. The dosage form sets the exposure. A capsule keeps the powder dry and shields it from light, so the capsule shell and the fill blend matter more than the water phase. A stick is dry until the consumer opens it, but it is hygroscopic once opened. A beverage is the hardest case: water, oxygen, possibly a heat step and a large interface. A tablet adds compression heat and can express surface oil; a gummy adds water activity and a warm holding step. ## What drives the oxidation Factors that move CLA powder oxidation and the control for each | Factor | What it does | Control | Heat | Raises the rate of peroxide formation and aldehyde production | Cool storage; low drying temperature; short heat exposure | Light | Accelerates lipid oxidation, especially at the surface | Opaque pouch or drum; dark storage | Oxygen | Feeds hydroperoxide formation | Barrier pack; minimal headspace; nitrogen flush if offered | Moisture | Softens the matrix, promotes caking and mobilises metals | Moisture barrier; desiccant if needed; reseal after opening | Trace metals | Catalyse oxidation at low concentrations | Specify and test the metals; avoid iron and copper contact | Surface oil | Exposes unprotected oil from the start | Ask for surface oil; keep the oil load within the process capability The antioxidant slows the chain reaction; it does not restore oil that has already oxidised, and it is not a substitute for a barrier pack. The antioxidant is declared on the specification, and the declaration should name it rather than say only “antioxidant”. ## A stability protocol for the powder Stability design for a microencapsulated CLA powder | Condition | Timepoints | Tests | 25 °C / 60% RH, commercial pack | 0, 3, 6, 12, 18, 24 months | CLA, isomers, PV, p-AV, moisture, appearance, micro | 30 °C / 65% RH, commercial pack | 0, 3, 6, 12 months | CLA, PV, p-AV, moisture, caking | 40 °C / 75% RH, accelerated | 0, 1, 3, 6 months | CLA, PV, p-AV, moisture, surface oil | Open pouch, 25 °C / 60% RH | 0, 1, 2, 4 weeks | Moisture, PV, p-AV, flow, dispersion | Finished form (stick, capsule, beverage) | 0, 3, 6, 12 months | CLA, PV, p-AV, sensory, micro The commercial pack is part of the test. A powder that is stable in a glass jar is not evidence for a foil pouch or a fiber drum with a liner. The accelerated condition is a screening tool; it supports a shelf life but does not replace real-time data at the storage condition the label states. For a hot, humid market, add a condition at 30 °C / 75% RH and read the moisture and caking results as carefully as the peroxide value. Test the isomer ratio as well as the total; a ratio outside its specification is an identity failure. ## The finished formula changes the answer A capsule or tablet is a dry matrix, and the main risks are the compression step, the surface oil and the shell or excipient chemistry. A stick or drink mix is dry in the pack but wet in use, so the consumer's preparation matters. A ready-to-drink beverage is the most exposed: water, dissolved oxygen, pH, heat and metal ions from the process all act on the oil. The powder's stability data do not transfer automatically to any of these; each form needs its own study. An overage is a formula decision, not a substitute for stability. If the label figure has to hold at the end of shelf life, the overage and the peroxide limit belong in the formula specification, supported by the study. Adding more powder to compensate for a rising peroxide value makes the oxidation worse, because more oil means more substrate. ## How the shelf life is assigned A shelf life is a date assigned to a pack under stated storage conditions. It is not a property of the CLA molecule. The assignment should come from real-time data on the commercial pack, with the accelerated arm as support, and it should name the storage condition and the tests that defined the end point. A CLA powder can fail on peroxide or p-anisidine value before the CLA assay moves, so the end point has to include the oxidation figures. Once a pouch is opened, the clock changes. The powder picks up moisture and oxygen every time it is opened, so the label should give an in-use period and a resealing instruction. Retest after storage is not a licence to extend the date without data. The COA page lists the oxidation lines, the MOQ page describes the packs, and the CLA powder hub carries the catalog specification. The moisture term is defined in the loss-on-drying glossary entry, and the quality page explains how stability data and retained samples are held. ### 04 CLA powder: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/fatty-acids/cla-powder/moq/ Reviewed: 2026-11-19 The minimum is 1 kg, packed in a foil pouch and drawn from a released lot. Production runs normally ship in 25 kg fiber drums, and the catalog lead time is 1–7 days. The order is shaped by the pack, the destination and the documents as much as by the quantity. In one lineOne kilogram from a released lot is the qualification unit; the pack, the destination and the documents shape the rest of the order. ## Why the minimum is 1 kg A 1 kg pouch is enough to run a bench trial, a small pilot batch and the first months of a stability study. It is drawn from a released production lot, so the sample carries the same certificate, the same lot code and the same retained sample as the material that will follow it. That is the point of the minimum: the buyer qualifies the material, not a special sample made for the enquiry. The 25 kg drum is the production pack. It suits a run that will use the powder over weeks rather than months, and it reduces the number of pouches opened on the line. A buyer who is still comparing grades should stay on the 1 kg pouch; a buyer who has fixed the grade and the label can plan around drums. The minimum is not a volume threshold and it is not a commitment to a drum. It is the smallest unit that can be traced, tested and shipped with a full document set. If the trial succeeds, the next order can move to the production pack without a new material qualification, provided the grade, the oil source and the carrier have not changed. ## The two packs Catalog packs for CLA powder | Pack | Net weight | Format | Typical use | What to confirm | Foil pouch | 1 kg | Sealed pouch, labelled with lot and dates | Trial, sample, small batch | Barrier layer, resealability, headspace | Fiber drum | 25 kg | Drum with a food-grade inner liner | Production run | Liner condition, closure, pallet pattern The pack is part of the stability case. A foil pouch and a lined drum present different moisture and oxygen barriers, so the shelf life assigned to one does not automatically apply to the other. Ask whether the pouch is nitrogen-flushed, what the liner is made of, and how the drum is sealed. The label on the pack should carry the product, grade, lot, net weight, manufacture and expiry date and the storage condition. For a 20% grade or an agglomerated grade, confirm the pack before the order. A higher oil load or a larger particle can change the bulk density and the fill weight, so the same drum may hold a different net weight. The pack specification should be written for the grade, not copied from the 10% powder. ## Lead time and what moves it The catalog lead time is 1–7 days. The lower end assumes a catalog grade in stock and a complete document set; the upper end covers a lot that has to be allocated, packed or released, or a destination that needs additional paperwork. The clock starts when the order, the specification and the shipping details are agreed, not when the enquiry arrives. Two orders can carry the same quantity and different lead times. A 1 kg pouch to a laboratory is not the same shipment as a pallet of drums to a factory. The destination, the mode, the Incoterm, the labelling language and any customer-specific test add time. A 20% or agglomerated grade is made to order and needs its own specification, so it should be planned with more room than the catalog grade. Ask for the lead time in writing with the order confirmation, and ask what happens if the lot fails release. A date that depends on a pending assay is not a date. ## What a quotation needs A quotation is comparable only when it describes the material and the transaction. Ask for these six items in the same message: - The grade and identity: 10% or 20%, total CLA by GC, isomer ratio, oil load, carrier, antioxidant and mesh. - The quantity and the pack: number of 1 kg pouches or 25 kg drums, and whether the pack is the catalog pack. - The destination and the Incoterm, with the port or address that sets the delivery point. - The document set: specification, batch COA, SDS, allergen and source statement, and stability data. - Any customer-specific requirement: label language, artwork, an extra test, a certificate of origin or a kosher or halal statement. - The requested delivery window and the date the quotation is valid until. A quotation that answers only the quantity is not comparable with one that answers all six. The specification is the first line because two offers for “CLA 10% powder” can describe different oil loads, carriers and isomer ratios. ## Samples and trials A 1 kg sample is a lot sample, not a promotional sachet. It should come with the lot COA, the specification and the SDS, and the lot code should match the pack. Keep a portion of the sample as a retained reference and test it in the real matrix: flow, dispersion, taste, colour and the behaviour in the stick or capsule. A sample that disperses cleanly in a beaker can still ring a glass or settle in a stick. Record the sample lot and the date. If the trial succeeds and the production order arrives from a different lot, the comparison between the two certificates is the change-control record. If the trial fails, the sample and its certificate are the evidence for the conversation with the supplier. ## Terms worth fixing before the first order Fix the Incoterm, the payment term, the currency of the quotation, the shelf life remaining at shipment and the documents that travel with each lot. Fix the change-control rule: a change of oil source, carrier, antioxidant, mesh or manufacturing site should be notified before it ships, with the revised specification and certificate. Fix what happens on a non-conformance: who pays for the retest, whether a replacement lot is offered and how the affected packs are handled. None of these terms is about the quantity alone. They decide whether the second order matches the first. The catalog specification is on the CLA powder product page, the grade options are on the grade page, and the certificate lines are on the COA page. The ordering unit is defined in the MOQ glossary entry, and the delivery term in the lead-time entry. ### 05 Where CLA is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/fatty-acids/cla-powder/compliance/ Reviewed: 2026-11-19 CLA is sold as a food supplement ingredient, and the route differs by market. The EU reads the supplement framework and the novel-food status for the intended use; the US uses the dietary-supplement route with a new-dietary-ingredient or GRAS file behind it; the UK applies assimilated novel-food and claims rules. The file has to show the source oil, the isomer ratio, the contaminants and the claim boundary before the label is designed. In one lineCLA is sold as a food supplement ingredient on a route that differs by market, and the file has to show the source, the isomer ratio, the contaminants and the claim boundary. ## Four checks, not one An ingredient file is checked at four levels: the ingredient route, the food category, the contaminants and the label with its claims. They fail independently. A lot can meet every heavy-metal limit and sit on the wrong route; a route can be correct and the label omit the allergen statement or the oil load. ## The European Union Food supplements fall under Directive 2002/46/EC, which harmonises vitamins and minerals but leaves other substances to national rules, so conditions can differ between member states. The novel-food Regulation (EU) 2015/2283 sits on top: a food not consumed significantly in the EU before 15 May 1997 needs an authorisation, and authorised novel foods appear in the Union list in Regulation (EU) 2017/2470 with their conditions of use. The novel-food catalogue records the status for the intended use and should be read before the label is written. CLA has a history of use in food supplements; a CLA-rich oil added to an ordinary food is a different question, with its own novel-food history and, if authorised, its own Union-list entry. As of this review, check the catalogue for the supplement use and the Union list for any food use; both can change, so read the current text. The labelling rules in Regulation (EU) 1169/2011 and the contaminant limits in Regulation (EU) 2023/915 apply in either case. The UK applies assimilated Regulation (EU) 2015/2283 through the GB novel-food register and the Food Standards Agency, while Northern Ireland follows the EU list; the same entry discipline applies in a different register. Allergen labelling follows the source: CLA from safflower or sunflower oil is not on the Annex II list, but a wheat-derived starch or a soy-derived antioxidant brings its own declaration. ## The United States In the US, CLA is marketed as a dietary ingredient under DSHEA. The FDA does not approve supplements or labels before marketing, so there is no pre-market licence. The framework is safety and labelling: the ingredient has to be lawful, the facility follows the dietary-supplement GMPs in 21 CFR 111, and the label follows 21 CFR 101. A new dietary ingredient needs a notification at least 75 days before marketing unless its history of use takes it outside the requirement. CLA-rich oils have GRAS notices for specified food uses, with the substance, the source and the use level defined in each notice. GRAS status for a food use is not the same as a supplement route, and a notice for one oil is not evidence for another. The supplier should name the notification or notice its material relies on, and the buyer should keep that reference. CLA from safflower or sunflower oil is not a major allergen, but a starch carrier or a soy-derived antioxidant can bring its own declaration. ## Contaminants and the specification Catalog limits and the EU supplement ceilings at this review | Parameter | Catalog limit | EU supplement ceiling | Note | Lead | ≤3 mg/kg | 3.0 mg/kg | Regulation (EU) 2023/915 | Cadmium | ≤1 mg/kg | 1.0 mg/kg | Same regulation | Mercury | ≤0.1 mg/kg | 0.10 mg/kg | Same regulation | Arsenic | ≤2 mg/kg | No harmonised maximum | National or customer limit | Peroxide value | ≤5.0 meq/kg | Not a regulatory maximum | Oxidation limit, not a contaminant | p-Anisidine value | ≤20.0 | Not a regulatory maximum | Oxidation limit | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Set by the specification | Confirm the customer's criteria Arsenic has no harmonised EU maximum for supplements, so the catalog limit is a customer-facing specification rather than a European legal limit. The limit applies to the finished product, so calculate it on the formula, not only the powder. ## The claim boundary In the EU and the UK, health claims are governed by Regulation 1924/2006 and the GB register that mirrors it. Only authorised claims may be used, and a claim that is not on the register is not made compliant by a footnote. As of this review, the EU Register of nutrition and health claims lists no authorised health claim for CLA. CLA has no NRV, so “high in” or “source of” claims do not apply; fat claims follow the fat content, which the oil load drives. In the US, a structure/function claim is allowed for a dietary supplement with the required disclaimer. A disease claim is not allowed unless it is an authorised qualified health claim; otherwise it turns the product into a drug. The wording decides. The supplier provides the specification; the brand owns the claim. No disease-related claim belongs on a CLA specification, COA or label. ## The file a buyer should hold Documents behind a CLA food-supplement file | Document | What it proves | Common gap | Specification | Grade, source, isomer ratio, oil load, carrier, limits and methods | No isomer ratio or oil load | Batch COA | The lot was released against the specification | Results copied from the range | Source and allergen statement | The oil source, the starch source and the antioxidant | “Allergen-free” with no carrier detail | Novel-food status (EU) | The catalogue or Union-list basis for the intended use | A generic “EU approved” line | NDI or GRAS reference (US) | The safety route for the exact oil | GRAS cited for a different use | SDS and stability data | Handling, storage and the shelf-life basis | A date with no study behind it | Contaminant and micro data | The lot meets the agreed limits | A panel without methods or limits of quantification | Label artwork | Ingredient name, oil load, carrier, allergen and claims | An isomer named without a specification ## The compliance checklist - Name the exact grade, oil source and isomer ratio, and match them to the route for the destination. - Confirm the CLA result and the GC method on the specification. - Check the catalogue or Union-list entry for the intended use, and the NDI or GRAS reference for the US. - Check the starch and antioxidant sources, and the allergen statement that follows. - Compare lead, cadmium, mercury, arsenic and microbiology with the applicable limits. - Check the label: ingredient name, oil load, carrier, fat declaration, allergen and storage. - Keep the claim inside the authorised list; no disease-related wording. - Hold the specification, COA, SDS, stability data and route references in one dated file. The route references are on the EU regulatory page, the US regulatory page and the UK regulatory page. The allergen list is explained in the Annex II glossary entry, the certificate lines are on the COA page, and the source and isomer decision is set out on the CLA isomer page. ### 06 How we prove a CLA lot is the declared isomer URL: https://nutrition.rainwoodbio.com/products/fatty-acids/cla-powder/identity/ Reviewed: 2026-11-19 A CLA lot is identified at four levels: the document set, the total CLA by GC, the isomer distribution and the oil load inside the starch. A CAS number and a 10% result do not separate a safflower-derived CLA oil from a diluted or partly oxidised one. Identity is the set of figures that agree with each other and with the specification. In one lineA CLA lot is identified by its total CLA, its isomer ratio and its oil load together, not by a CAS number or a single assay. ## Four layers that have to agree The first layer is the paperwork: a specification naming the grade, oil source, isomer ratio and oil load; a lot certificate; and one lot code across certificate, pack and retained sample. A file that does not close is a reason to stop before the laboratory work. The second layer is the total CLA by GC. The third is the distribution of the main isomers. The fourth is the matrix: how much oil the starch carries, which starch and antioxidant, and how much oil sits on the surface. CLA content equals oil load multiplied by the CLA concentration of the oil, so a total CLA figure that cannot be reconciled with the declared oil load is an identity problem even when each number looks plausible on its own. The four identity layers for a microencapsulated CLA powder | Layer | What it shows | What it misses | Document set | Grade, source, lot trace and the specification released against | Whether the powder in the pack is that lot | Total CLA by GC | The mass of conjugated linoleic acid in the powder | Which isomers make up the total | Isomer distribution | The c9,t11 and t10,c12 split, and the minor isomers | The oil load and the carrier | Matrix and oil load | How much oil the starch carries and what else is present | Whether the oil is fresh or oxidised ## The isomer ratio is part of the identity Conjugated linoleic acid is not one molecule. It is a family of C18:2 isomers with conjugated double bonds, and the two that dominate commercial oils are c9,t11 and t10,c12. They have the same formula and different geometry: c9,t11 is (9Z,11E), also called rumenic acid, and t10,c12 is (10E,12Z). A certificate that reports only the total makes them look interchangeable, which they are not on a specification or a label. The ratio is set by the oil process, not by the starch. Isomerisation of linoleic acid produces a mixture, and the purification decides the final split. Commercial CLA oils are often close to 1:1, but that is a process outcome, not a default that can be assumed. The specification should state each main isomer as a percentage of the powder, of the oil or of total CLA, and it should say which basis is used; a ratio without a basis is not testable. The GC method has to resolve the two peaks. They elute close together, and a short column or a loose temperature programme can merge them or merge one with linoleic acid. The certificate should name the column, the detector, the standard for each isomer and the integration. If the laboratory reports only a total, ask for the chromatogram and the peak areas. The CAS number is a useful label but not an identity test. This catalog lists CAS 2420-56-6 for CLA; registries also assign separate numbers to individual isomers, so the CAS does not give the ratio. Use it to find the material, then use GC and oil load to prove the lot. ## Why XRD does not identify CLA X-ray diffraction sees crystalline structure. A CLA oil is liquid and amorphous at room temperature, so it produces no CLA diffraction pattern. The starch carrier may be crystalline or partly amorphous, and its pattern changes with source, modification and drying; XRD is a tool for the carrier, not for the oil. A diffractogram that matches a starch reference tells you the matrix is starch. It says nothing about whether the oil inside is CLA, a different oil or a mixture. The identity method for the oil is GC, supported by fatty acid and sterol profiles when adulteration is suspected. XRD belongs in carrier characterisation, not in the CLA identity block. Asking for an XRD pattern as proof of CLA is asking the wrong test. The XRD method note covers the technique. ## What substitution looks like Common CLA powder substitutions and the test that catches each | Substitution | What it looks like | Test that catches it | Dilution with a non-CLA oil | CLA figure met, oil load high, fatty acid profile shifted | GC total CLA against oil load; fatty acid profile | Low-CLA oil | More oil needed to reach 10%, so the oil load is high | Oil load arithmetic; sterol and tocopherol profile | Oxidised oil | Assay passes, peroxide or p-anisidine value high | PV and p-AV on a stated basis; colour and odour | Carrier overload | CLA figure met with a low oil load; dense, starchy powder | Oil load, starch content, microscopy | Wrong isomer ratio | Total CLA correct, c9,t11 and t10,c12 split shifted | GC isomer distribution with standards A 10% CLA powder with a 12% oil load implies an oil that is about 83% CLA; a 10% CLA powder with a 20% oil load implies an oil that is about 50% CLA. If the certificate gives the CLA figure and not the oil load, the buyer cannot run the check. ## How to write the identity into the specification Write the product as a full identity, not a category: “Microencapsulated conjugated linoleic acid powder, 10% total CLA by GC, c9,t11 and t10,c12 reported as a percentage of total CLA with the ratio and its tolerance, oil load declared, carrier modified starch with a named antioxidant, ≥95% through 40 mesh, CAS 2420-56-6, source oil named.” Add the oxidation limits, the moisture limit, the heavy metals and the microbiology, and name the methods. The ratio needs a tolerance. A specification that says “1:1” with no range cannot be tested; the tolerance decides what counts as the same oil. State whether each isomer is a percentage of the powder or of the total CLA, and keep the same basis on the certificate and the label. The isomer page covers the label side of that choice, and the COA page lists the certificate lines. ## Five questions to a supplier - What is the total CLA and the full isomer distribution on the lot, with the chromatogram and the standards named? - What is the oil load, and how was the oil extracted from the starch before GC? - Which oil is the CLA made from, and what do the fatty acid and sterol profiles show? - What are the peroxide and p-anisidine values, on what basis, and what is the surface oil? - Which starch and antioxidant are used, from which source, and what is the allergen statement for the lot? If the supplier cannot give the oil load, the isomer split or the oxidation basis, the 10% figure is not an identity. The catalog specification is on the CLA powder hub, and the certificate terms are in the assay glossary entry. ### 02.1 CLA isomers: c9,t11 vs t10,c12 and the label URL: https://nutrition.rainwoodbio.com/products/fatty-acids/cla-powder/grades/cla-isomers/ Reviewed: 2026-11-19 Conjugated linoleic acid is a family of isomers, and the two that dominate commercial oils are c9,t11 and t10,c12. They share a molecular formula but are different molecules on a specification and, where a brand names one, on a label. The ratio, the basis and the method belong in the specification before the label is written. In one lineThe c9,t11 and t10,c12 isomers are different label ingredients, so the ratio belongs in the specification before it reaches the label. ## Two isomers, one name Linoleic acid is an 18-carbon fatty acid with two double bonds separated by a methylene group. Conjugated linoleic acid has the same formula, C18H32O2, but the double bonds are adjacent, separated by one single bond, and that changes the geometry and the chemistry. The c9,t11 isomer has its double bonds at carbons 9 and 11, with cis geometry at 9 and trans at 11; it is (9Z,11E) and is also called rumenic acid. The t10,c12 isomer is (10E,12Z). Both are found in ruminant fats, and both are produced when linoleic acid is isomerised industrially to make a CLA oil. They are not interchangeable. A specification that gives only “CLA 10%” does not say which isomer is present or in what proportion, and a label that names one isomer is making a claim the certificate has to support. The distinction is chemical, not a marketing preference: the two have different melting behaviour and different analytical retention times. ## Ratio, total and basis Commercial CLA oils are often close to a 1:1 mix of c9,t11 and t10,c12, because the isomerisation and purification are tuned to that balance. Close to 1:1 is a process outcome, not a legal definition. Some oils are enriched in one isomer, and the ratio can drift with the raw material and the process. The specification should therefore give each main isomer, not only the total, and it should give a tolerance around the ratio. The basis has to be stated. An isomer figure can be a percentage of the powder, a percentage of the oil or a percentage of total CLA. The three are different numbers. A certificate that says “c9,t11 40%” without a basis could mean 40% of the oil, 40% of the CLA or 40% of the powder, and the reader cannot tell. Write the basis into the specification and repeat it on the certificate and the label. The total is the sum of the isomers, but only if the method integrates them all. A laboratory can report a total from the two main peaks and ignore the minor isomers, or sum every conjugated peak; the two totals are not the same. Ask which convention the certificate uses, and ask for the chromatogram. The identity page explains why the ratio and the oil load have to agree with the total. ## What the label can say The ingredient name is “conjugated linoleic acid”, with “CLA” as the familiar abbreviation. If the brand wants to name an isomer, the label should use the isomer name the specification supports: c9,t11, t10,c12, or a declared mix. A label that says only “CLA” does not promise a ratio; a label that says “c9,t11” promises that isomer, and the certificate has to show it lot by lot. The oil load drives the fat declaration. CLA is a fatty acid, so the powder contributes fat in proportion to the oil it carries, not in proportion to the CLA figure alone. The carrier and the antioxidant are ingredients and belong in the ingredient list; a starch carrier and an antioxidant are not invisible on the label. If the carrier is wheat-derived or the antioxidant is soy-derived, the allergen statement has to follow the source. Do not put a ratio in the brand name unless the specification, the certificate and the label all use the same basis and the same tolerance. A “1:1” claim that the certificate reports as 45:55 is a mismatch the buyer will find at the first audit. The grade page covers how the oil load changes with the grade. ## What the rules say about the name In the EU and the UK, the ingredient has to be named in the ingredient list in a way the consumer can understand, and any health claim has to be authorised under Regulation 1924/2006. As of this review, the EU Register lists no authorised health claim for CLA. Naming an isomer is an identity statement, not a health claim, but it still has to be true and it still has to match the specification. In the US, the label follows 21 CFR 101, and a structure/function claim needs the DSHEA disclaimer; a disease claim is not allowed. The compliance page sets out the market routes. The novel-food and dietary-ingredient routes attach to the oil, not to the three-letter abbreviation. A supplier's statement that “CLA is approved” does not say which isomer mix, which use or which market. Ask for the reference that belongs to the exact oil. ## When to choose a mix and when to choose one isomer Choose a declared mix when the label says “CLA” without naming an isomer, when the supply has to be reproducible across lots, and when the specification can carry a ratio with a tolerance. A mixed oil is the usual commercial material, and it is easier to source and to keep consistent than an enriched fraction. The label then describes the ingredient, and the certificate carries the ratio. Choose an enriched or single-isomer oil only when the label names that isomer and the project has a specification, a certificate and a supply chain for it. That is a different material with its own lead time, and it needs its own stability and allergen file. The choice is a labelling and supply decision, not a health claim, and it should be made before the artwork is signed off. If the brand has no isomer story, do not invent one. A label that names an isomer it cannot prove is worse than a label that names the ingredient and lets the certificate carry the detail. ## How to write the isomer into the specification Write the identity as a set of figures: total CLA by GC; c9,t11 and t10,c12 each as a percentage of total CLA and as a percentage of the powder; the ratio with its tolerance; the oil load; the carrier and antioxidant; the mesh; the oxidation limits; the source oil; and the CAS number. State the basis once and use it everywhere. If the certificate reports only the total, the specification is stronger than the file that supports it. This catalog lists CAS 2420-56-6 for CLA. Registries also assign separate numbers to the individual isomers, so the CAS is a handle for the material, not a statement of the ratio. The CLA powder hub carries the catalog specification, and the COA page lists the lines a certificate should carry. ### 01 What the COA for L-ergothioneine actually contains URL: https://nutrition.rainwoodbio.com/products/specialty/ergothioneine/coa/ Reviewed: 2026-11-19 The certificate for an L-ergothioneine lot reports appearance, identification by 1H-NMR and by HPLC, assay by HPLC, specific optical rotation, loss on drying, residue on ignition, particle size, the heavy-metal panel and microbiology. Each row should carry the method, the release limit and the result measured on that lot. The ranges on this page are the catalog specification; the batch COA is the document that confirms a particular pack. A purity figure on its own does not establish the L form. In one lineA 99.5% assay says how much of the molecule is present; the rotation and the NMR say which molecule, and only the lot results say what was measured. ## The certificate as a test report A certificate is only useful if it can be audited line by line. Each parameter needs the measurement, the method that produced it and the limit the lot was released against. The two tables separate the rows that describe the molecule from the rows that describe the powder. Identity, assay and moisture · L-ergothioneine | Parameter | Method | Release limit | Appearance | Visual | White to off-white crystalline powder | Identification A | 1H-NMR | Spectrum conforms to the reference | Identification B | HPLC retention | Conforms to the reference standard | Assay | HPLC | ≥99.5% | Specific optical rotation | Polarimetry, c = 1, water | ≥ +122° | Loss on drying | Gravimetric | ≤0.5% | Residue on ignition | Gravimetric | ≤0.1% Physical, contaminant and microbiological limits | Parameter | Method | Release limit | Particle size | Sieve analysis | ≥95% through 40 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent ## What the assay and the identification actually measure The assay is a mass-purity figure. It answers how much of the declared molecule is present, not whether that molecule is the L enantiomer. Two numbers can sit at 99.5% while one is the natural configuration and the other is a racemate: the assay does not see the difference. The basis belongs beside the result. A figure reported as-is includes the water that loss on drying measures; a figure on the dried basis excludes it. At the 0.5% loss-on-drying ceiling the two differ by about half a percentage point — 99.5% on the dried basis is roughly 99.0% as-is. That gap is the whole distance between a passing and a failing lot when the limit is 99.5%, so the certificate has to say which basis was used. The assay method matters as much as the number. Area normalisation cannot see water, inorganic residue or a non-chromophore impurity; an external standard reports mass purity and depends on its own purity. Ask which column, wavelength and reference standard sit behind the figure. Identification is a separate row and should be read as one. A 1H-NMR run in D2O shows the whole proton set, including the nine-proton trimethylammonium signal that the betaine structure produces; a spectrum matched against a reference is evidence for the molecule, not for its optical purity. HPLC retention adds a second, orthogonal look at the same sample. Neither substitutes for the rotation. ## Release limit versus batch result The release limit is the acceptance boundary; the batch result is what the laboratory measured. Both belong in separate columns, with the method next to them. A result column filled with the specification range is not a result — it is a copy of the gate, and it tells the buyer nothing about the pack being shipped. Three rows deserve the closest reading. Specific rotation should be reported with the conditions — wavelength, temperature, concentration and solvent — because the number has no meaning without them. Loss on drying is both a purity correction and the first signal of a hygroscopic solid that has taken up water in handling. Residue on ignition is small in absolute terms, at 0.1%, but it is the row that catches inorganic carry-over from a synthesis or a recovery step. Heavy metals and microbiology are panel results, not single figures. Each element should appear against its own limit, and the microbiology section should name the tests performed rather than print one word. “Conforms” is a conclusion; the reader should be able to reach it from the numbers on the page. ## What moves between batches Assay and rotation track the isolation and the final crystallisation. Rotation is the sensitive one: a lot that passes assay while the rotation drifts toward the limit is telling you something about the isomer, not about the yield. A single low reading deserves a repeat with a fresh solution before it becomes a rejection. Loss on drying moves with the drying step and, later, with the pack. A rising LOD across shipments that were opened in a humid room is a handling signal, not a manufacturing one. Colour is qualitative and often more revealing than a number: a tint that develops while the assay still passes usually points to oxidation or to a metal trace, and it should trigger a question rather than a quiet acceptance. Particle size and bulk density move with milling and sieving. They matter downstream: a specification that fixes 40 mesh but says nothing about density can still deliver two powders that run differently on the same filler. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, an isomer claim the supplier's certificate does not prove, or a disputed result. The useful panel is built around the questions the certificate leaves open: HPLC purity with the related-substance profile, polarimetry under the declared conditions, 1H-NMR, ICP-MS for the metal panel and a moisture determination, all on one submitted sample. If the rotation is ambiguous, chiral HPLC is the referee: it can resolve the two enantiomers and report an enantiomeric ratio that polarimetry alone only implies. Ask the laboratory to state its limit of detection for any impurity screen; a “not detected” line without a limit describes the method, not the sample. Chain of custody matters as much as the panel: the sample tested should be the sample retained, and the lot code on the report should match the pack. Keep the retained sample until the lot is consumed. ## What to compare between suppliers Put six lines side by side: the isomer named; the assay with its method and basis; the specific rotation with its conditions; loss on drying; the related-substance profile; and the 1H-NMR identity. Two quotations that agree on the assay but diverge on the other five are not describing the same material. The second layer is traceability. The lot code should be identical on the certificate, the pack and the retained sample, and the certificate should name the manufacturer rather than only the trader. The specification sits on the L-ergothioneine product page; the forms are compared on the grade page; the tests that separate the L form from a blend are on the identity page; the release workflow is described on the quality page; and the chromatography itself is explained in the HPLC method note. ### 02 Pure ergothioneine or a dilution: choosing a grade URL: https://nutrition.rainwoodbio.com/products/specialty/ergothioneine/grades/ Reviewed: 2026-11-19 For a single chemical entity the grade question is not a potency ladder: the catalog material is already ≥99.5% by HPLC. What changes between grades is the physical form — a 40 mesh crystal, an 80 mesh milled powder, or a dilution on a carrier — and that choice changes the fill weight, the content uniformity and the label, not the identity. The grade has to be chosen from the dose and the dosage form, then written into the purchase specification. In one lineThe pure substance is fixed at ≥99.5%; the grade decision is about particle size, carrier and dose per gram, and the label has to follow it. ## Why a 99.5% material still has grades Most ingredients are sold as a range of potencies, so buyers learn to read the percentage first. L-ergothioneine does not work that way. On the pure material, the catalog specification fixes the assay at ≥99.5% and the rotation at ≥ +122°, and neither moves between the 40 mesh and the 80 mesh forms. What moves is how the powder behaves in a blender, a capsule filler and a stick-pack machine. The commercial unit is the milligram, not the kilogram. A capsule may carry 5 to 30 mg of ergothioneine; a stick pack or a gummy may carry a similar dose inside several grams of matrix. At that scale the pure crystal is a small part of the fill, and the rest of the fill has to be chosen deliberately rather than left to the excipient list. A dilution is not a weaker version of the same grade; it is a different material. It has a carrier, a different assay, its own homogeneity requirement and its own label declaration. Reading it as the same material at a lower assay is how a formulation ends up under-dosed. ## The three forms side by side Catalog forms · L-ergothioneine | Form | What it is | Ergothioneine per gram | Fits | Crystalline, 40 mesh | ≥99.5% pure, unmilled crystal | About 995 mg | Capsules, tablets, dry blends | Milled, 80 mesh | Same assay, finer particle | About 995 mg | Low-dose blends, suspensions | Dilution | Pure material on an agreed carrier, stated percentage | Set by the ratio, e.g. 100 mg at 10% | Sticks, gummies, very low doses The first two rows differ only in particle size, and both carry no carrier. The third is a formulated material and needs a specification of its own. The pure versus dilution page works through the arithmetic and the uniformity question in detail. ## What particle size changes Mesh is a sieve number, not a quality rank. A 40 mesh powder passes a sieve with openings of about 420 µm; an 80 mesh powder passes about 180 µm. Both are the same crystal at the same assay, but they do not behave the same way in a plant. The coarser 40 mesh powder flows more freely, generates less dust and is easier to weigh in a dry room. The finer 80 mesh powder disperses more evenly through a low-dose blend and stays suspended more readily, but it flows less freely and generates static and airborne dust. For a capsule filled by weight at a dose well below the fill weight, uniformity usually matters more than flow; for a high-speed tableting line, flow usually wins. A dilution adds a second variable: the carrier. If the carrier's particle size and bulk density do not match the pure material, the blend can segregate in the drum, in the hopper or in the capsule bowl. Matching the carrier to the powder is a formulation decision, and it should be made before the dilution is ordered rather than after the first homogeneity failure. ## Matching the grade to the dosage form Capsules. At 20 mg in a 400 mg fill, the pure powder is 5% of the capsule. That is a small number to weigh accurately and to distribute through the fill, and a pre-made dilution at a matched ratio is often the more robust route. The alternative is to keep the pure material and accept that most of the fill is excipient. Tablets. Direct compression wants flow and compressibility. A fine, low-dose active is a content-uniformity risk, so a dilution on a compressible carrier can be the better choice; a high-dose tablet is easier with the pure crystal and a well-designed granulation. Stick packs and sachets. The fill is measured in grams, and the active is a fraction of a percent of it. A dilution is the practical way to weigh and blend at that ratio, provided the carrier is soluble and does not add a taste or a moisture problem. Gummies and chews. The matrix is wet and warm, so the powder is added into a process rather than a dry blend. Dispersion and water activity matter more than mesh; the stability questions are covered on the stability page. ## What to write into the specification For the pure material, the grade line is short: “L-ergothioneine, ≥99.5% by HPLC, 40 mesh, no carrier.” Add the rotation and the moisture limit from the catalog, and the line describes a material that can be tested on receipt. For a dilution, the line has to carry more: the percentage of L-ergothioneine, the identity of the carrier, the assay range for the blend, the homogeneity requirement and the method used to test it. “L-ergothioneine 10% on maltodextrin, blend assay 9.5–10.5% by HPLC, homogeneity RSD ≤5% across ten sample points” is a specification; “ergothioneine blend” is not. The blend also needs its own certificate. The pure material's COA stops at the drum that was diluted; the blender becomes the manufacturer of the blend and should issue the release document for it. A buyer who accepts the pure COA as cover for a dilution has no result for the material actually received. ## When a dilution is the wrong choice A dilution stops making sense when the dose is large enough that the extra carrier becomes the dominant mass. A 100 mg dose from a 10% blend needs a gram of powder per unit; from the pure material it needs 100 mg. The fill weight, the capsule size and the shipping volume all follow the arithmetic. It is also the wrong choice when the carrier brings a problem: a reducing sugar or a high-moisture carrier in a hygroscopic powder, a carrier that cannot be declared on the label, or a customer specification written for the pure substance. And it is the wrong choice when the ratio is not justified by the dose — a 1% dilution ordered for a 5 mg dose means 500 mg of blend per unit, which is a formulation decision that should be made on purpose. The specification for the chosen grade sits on the L-ergothioneine product page; the certificate rows are explained on the COA page; the packs and minimum order are on the ordering page; and sieve sizes are defined in the particle-size note. ### 02.1 Pure ergothioneine vs a dilution: what the fill weight hides URL: https://nutrition.rainwoodbio.com/products/specialty/ergothioneine/grades/pure-vs-dilution/ Reviewed: 2026-11-19 A 500 mg capsule weighs the same whether it holds 497.5 mg of pure L-ergothioneine or 50 mg spread through a 10% blend. The fill weight is a property of the capsule, not of the dose. What changes is the active per unit, the mass needed for a given dose, the uniformity risk and what the label must declare. The conversion is arithmetic; the blend uniformity is the part the arithmetic does not cover. In one lineThe fill weight stays the same when a pure powder is swapped for a dilution; the dose, the powder mass and the label are what move. ## What the fill weight actually fixes A capsule is sized by volume and filled by weight. The fill weight is the total powder in the shell: active plus filler, lubricant and any other excipient. Change the active from a pure crystal to a 10% blend and the shell can stay the same size, the fill weight can stay at 500 mg, and the ergothioneine in the capsule falls by a factor of ten. This is why a dose statement and a fill weight are not the same number. A supplement that declares “500 mg” on the front of the pack may be declaring the fill, the blend or the active, and only the supplement facts panel says which. The same trap runs through a purchase order: “500 mg capsules” describes a fill, not a specification. A 25 mg dose needs about 25 mg of the pure powder, so in a 500 mg capsule the other 475 mg is filler. Filling the same capsule with pure powder alone would deliver 497.5 mg, far above the 30 mg daily ceiling in the EU supplement entry. Concentration, not shell size, is what sets the dose. ## The conversion, both ways Content per unit is fill weight multiplied by concentration. The concentration comes from the assay: 99.5% is 0.995 g of ergothioneine per gram of powder, a 10% blend is 0.100 g per gram, and a 1% blend is 0.010 g per gram. Going the other way, the powder mass for a target dose is the dose divided by the concentration. Fill weight, concentration and dose | Powder | Ergothioneine in a 500 mg fill | Powder for a 25 mg dose | Pure, 99.5% | 497.5 mg | 25.1 mg | 50% blend | 250 mg | 50 mg | 10% blend | 50 mg | 250 mg | 1% blend | 5 mg | 2,500 mg The table makes the trade visible. A 1% blend is convenient to weigh for a 5 mg dose and impossible for a 25 mg dose inside one capsule, because the powder mass alone is 2.5 g. A 50% blend sits in the middle: 50 mg of powder for a 25 mg dose, a comfortable fill but a heavy dilution. Two corrections belong beside the arithmetic. The blend's assay is not the pure assay, because the carrier contributes mass and may carry moisture; the blend needs its own release figure. And the label percentage is the active, not the blend: a 10% blend at a 500 mg fill delivers 50 mg, not 500 mg. ## Why a dilution is a uniformity problem At 1%, one gram of blend contains 10 mg of ergothioneine, and a minor component is where segregation starts. If the carrier's particle size and bulk density do not match the active, the two can separate in the drum, the hopper and the capsule bowl, and the first and last capsules of a run can differ beyond the assay tolerance. A validated dilution is made in a blender with a defined load, a defined time and a defined sampling plan: typically ten points across the batch, with a relative standard deviation target agreed in the specification. A hand-made geometric dilution in a bucket can look uniform and fail on the tenth sample. Ask for the homogeneity result and the sampling plan, not only the blend assay. The blend also has to stay uniform through the run: a hygroscopic active can bridge in the hopper and a dense carrier can settle. The fill-weight check during production is the practical test, and it belongs in the batch record. ## What each dosage form wants Capsules. The shell fixes the volume, so concentration is the variable: a low dose in a large shell suits a dilution, a dose near the fill weight suits the pure powder. Downsizing the capsule is often cleaner than a very low-percentage blend. Tablets. Direct compression at a low dose needs content uniformity, and a dilution on a compressible carrier helps. The carrier then has to compress, which limits the choice; a carrier chosen only for flow can produce a soft tablet. Wet granulation adds water and heat to a hygroscopic, oxidation-sensitive powder, so the process choice and the grade choice belong together. Stick packs. A 1–3 g fill at a 25 mg dose is a blend of about 0.8–2.5%, and the dilution is doing real work: it makes the powder weighable and dispersible. The carrier must be soluble and neutral in taste, and the seal of the stick is the shelf life, as the stability page explains. Gummies and chews. The active is dispersed in a wet, warm matrix, so uniformity is a mixing question and the carrier is part of the recipe; a dilution can help dispersion or hurt if it adds water or a reducing sugar. ## What the label has to say The declared quantity is the ergothioneine per portion, not the blend weight and not the fill weight. In the EU the novel-food entry also requires the designation “L-ergothioneine” on the label, and the carrier of a dilution belongs in the ingredient list. In the US the Supplement Facts panel carries the amount per serving and the ingredient list carries the source name. A purity claim belongs to the material it describes. “99.5% pure” can describe the pure powder; it cannot describe a 10% blend, because the blend is 90% carrier. A label that puts the pure material's assay next to a diluted product is accurate about the ingredient and misleading about the product. The compliance page sets out the designation and the category limits; the COA page shows how the assay behind the number is reported. ## Choosing between them Choose the pure material when the dose is a meaningful fraction of the fill, when the label should carry one ingredient, when the carrier would add moisture or a taste, or when the customer's specification names the pure substance. Choose a dilution when the dose is small against the fill, when weighing accuracy or content uniformity is the binding constraint, or when a stick or a gummy needs a larger powder mass to disperse. Before either is ordered, write the dose, the fill weight and the concentration into one line and check that they agree. If the line needs a 2.5 g powder mass for a 25 mg dose, the dilution is wrong for the format; if it needs 25 mg of powder in a 500 mg fill, the pure material is right and the capsule is mostly excipient. The grade page compares the catalog forms, and the hub carries the specification. ### 03 Ergothioneine is hygroscopic and oxidation-sensitive; the pack decides the shelf life URL: https://nutrition.rainwoodbio.com/products/specialty/ergothioneine/stability/ Reviewed: 2026-11-19 Crystalline L-ergothioneine keeps well in a sealed, dry pack. The two failure routes are moisture — the solid is hygroscopic, so an opened pack gains water, cakes and loses flow — and oxidation in solution, where the thione can convert to the disulfide in the presence of oxygen, light and trace metals. A shelf life is a conclusion from stability data on this grade and this pack, not a property of the molecule. In one lineThe crystal keeps in a sealed pack; water, oxygen, light and metal traces decide whether an opened pack or a finished formula does. ## The dry powder Sealed at room temperature, the crystalline solid is not expected to lose assay. Its release limit for loss on drying is ≤0.5%, and that figure is both a purity correction and the first sign of a pack that has been opened in a humid room. Once the liner is broken, the room enters the pouch: the powder takes up water, the loss-on-drying figure climbs, particles stick together and flow changes. Caking and bulk-density drift are the visible effects. A powder that ran cleanly on Monday can hang in the hopper after a damp weekend, and the capsule fill weight follows the flow. The control is part procedural and part packaging: a foil pouch that is genuinely sealed, a desiccant where the climate demands one, and a closing routine for the pouch and the drum between weighings. Hygroscopicity is a property of the molecule, not a defect in the lot. It belongs in the handling instruction and in the dose-room specification; the packaging page describes the packs that carry it. ## In solution The material is freely soluble in water and the solution is clear and colourless. The thione is the stable form of the molecule, which is why the dry solid keeps so well; in solution that balance is disturbed, and oxidation to the disulfide becomes the route to watch. Dissolved oxygen, light and trace metals all push the same reaction, and the rate rises with temperature. pH is the second variable. A solution held away from the pH used in the stability study is a different system, and a colour shift is an early signal that something has moved before the assay does. For a beverage, the study has to run at the formula's own pH, water activity and process temperature, not in water at room temperature. Preservation is a separate question. A clear, unpreserved aqueous format can support microbial growth whatever the active is, so the microbiological side of the shelf life belongs in the same study as the chemical side. ## What actually moves the result Stability factors · L-ergothioneine | Factor | Effect | Control | Water | Higher loss on drying, caking, poor flow | Sealed liner, desiccant, dry handling | Oxygen in solution | Disulfide formation, colour drift | Deaerated water, inert headspace, closed process | Light | Colour drift, faster oxidation | Opaque or amber pack, dark storage | Heat | Faster oxidation, drying strain | Cooler process, add late, controlled storage | Iron and copper traces | Catalysed oxidation | Metal limits in the specification, sequestrant where allowed | pH away from the studied value | Solution stability and colour | Buffer and trial the final matrix ## The stability protocol The bulk study keeps powder in its commercial pack at 25 °C/60% RH and 40 °C/75% RH. Pulls are taken at the start and then at 3, 6, 12 and 24 months, with assay by HPLC, the related-substance profile, specific rotation, loss on drying, appearance and microbiology tested at each point. The warm leg is a stress condition, not a storage instruction; it exists to make a trend appear inside the study window. Rotation belongs in the panel even though it is not expected to move. If it does, the question is no longer about the pack: it is about the isomer, and the lot has to be investigated rather than re-labelled. The related-substance profile is the other early indicator, because the disulfide and other oxidation products appear there before the assay falls far. The finished-product study runs alongside, not instead. The capsule, stick or gummy goes into its own pack at 30 °C/65% RH and 40 °C/75% RH and is tested for assay, moisture, appearance, taste and dissolution where it applies. Bulk powder can pass while the finished product fails, and the finished product is what carries the date. ## Formulation and packaging Capsules and tablets. The pack shields the powder; the remaining risks are moisture and the excipients. A hygroscopic active next to a high-moisture excipient will pick up water inside a sealed capsule, so the excipient's water content belongs in the formulation review. Direct compression is the gentler route; wet granulation adds water and heat in the same step. Stick packs. The seal is the shelf life. Foil laminate, a continuous seam and a low moisture-vapour transmission rate are the baseline; a clear or paper format is a marketing choice that needs its own data. A pinhole in a seam defeats a good laminate. Gummies and chews. The matrix is wet and warm, so oxidation and moisture are both live. Add the powder as late and as cool as the process allows, control water activity, and check the colour over the study rather than only at release. Drinks. Dissolved oxygen, pH, light and preservation govern the result. Nitrogen flushing or deaerated water can be specified; a clear bottle on a lit shelf is the hardest case and needs its own study. ## How shelf life is assigned A shelf life is a conclusion from data, not a standard number attached to a chemical name. The technical data sheet should give the storage condition and the retest or expiry period the study supports. Bulk material that will be re-tested before use can carry a retest period; a consumer pack needs a date the buyer can read. Where the pack or the matrix has not been studied, the defensible answer is a shorter period or a new study. A 24-month figure borrowed from another pack proves nothing about this pouch, this drum or this gummy. The COA releases a lot; it does not predict a shelf life. Ask for the remaining shelf life at shipment, not only the total. A lot with a long total period that has already spent a year in a warehouse arrives with less than the label suggests. The parameters followed over time are listed on the COA page; the quality page explains how the data are held; and the L-ergothioneine hub carries the specification. ### 04 L-Ergothioneine: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/specialty/ergothioneine/moq/ Reviewed: 2026-11-19 One kilogram is the minimum because the smallest released unit is the 1 kg foil pouch, and a qualification trial needs a lot with a certificate, a retained sample and a pack that can be shipped. The standard pack is 1 kg in foil or 25 kg in a fiber drum; catalog material ships in 1–7 days, while milling or a dilution adds a production step. A quotation needs six details, and the sample policy follows the same lot logic. In one lineThe minimum order is one released kilogram, not a commercial threshold: it is enough for a trial, a retain and a paperwork check on the same lot. ## Why the minimum is 1 kg A kilogram of L-ergothioneine is a large number of doses. At 25 mg per unit it makes about 40,000; at 5 mg it makes about 200,000. That is enough for a pilot batch, a stability study, a retain sample and a market test, which is exactly what a first order has to cover. The unit also matches the release logic. The 1 kg pouch is filled from a released lot and carries that lot's certificate, so the buyer can qualify a material and a lot in one step. A smaller repack would break the link between the pack and the certificate, and a buyer who needs a sub-kilogram trial is usually better served by a sample drawn from a released lot than by a custom pack. Above 1 kg the arithmetic changes but the logic does not. A 25 kg drum is the production pack, and a multiple of it is a production order. The minimum is a floor for a trial, not a ceiling for the order. ## Packs and what they protect Standard packs · L-ergothioneine | Pack | Construction | Typical use | 1 kg foil pouch | Heat-sealed foil laminate, desiccant where agreed | Trial, sample, small batch | 25 kg fiber drum | Double polyethylene liner inside a fiber drum | Production | Milled 80 mesh | Same packs, different label line | Low-dose blends | Dilution | 1 kg or 25 kg, carrier declared on the label | Sticks, gummies, very low doses The pack is part of the specification because the powder is hygroscopic. A foil pouch with a sealed seam and a desiccant is the baseline for a small pack; the drum relies on its liner and on the drum being closed between weighings. A repacker who moves the powder into an unlined container has changed the material's storage condition without changing its certificate. Labels should carry the product name with the L isomer, the assay, the lot code, the net weight, the storage condition and the pack date. The stability page explains why the pack, not only the molecule, sets the shelf life. ## Lead time Catalog material ships in 1–7 days from a confirmed order. The clock starts when the order, the specification and the shipping details are agreed, not when the enquiry arrives; a quotation that has not been confirmed does not reserve a lot. Two requests add a step. Milling to 80 mesh is a separate operation with its own release test, and a dilution is a new material with a blend assay and a homogeneity check. Both are routine, and both move the shipment behind the catalog pack in the queue. Export documentation adds time at the border rather than at the plant. Ask for the planned ship date and the lot that is being reserved. A lead time quoted against a lot that is already committed is not a lead time. ## The six details a quotation needs - The isomer. Write “L-ergothioneine”, not “ergothioneine”. The L form is the material with the rotation specification, and the quotation should say so. - The grade and form. 40 mesh crystal, 80 mesh milled powder, or a dilution with the carrier and the percentage named. - The quantity. 1 kg, 25 kg or a multiple, with the number of packs. - The pack. Pouch or drum, desiccant, and any labelling the buyer will apply. - The destination. The country sets the regulatory file, the label language and sometimes the document set. - The documents and tests. COA, TDS, SDS, NMR and rotation data, a third-party report, allergen and GMO statements — whichever the project needs. Six lines produce a quotation that can be checked against the specification. A request for “a quotation on ergothioneine” can come back quoting a different isomer, a different mesh or a different pack. ## Samples A sample is drawn from a released lot and travels with that lot's certificate. The 1 kg pouch is the smallest standard pack, so a smaller sample is a sub-sample of a released lot rather than a pack in its own right; the lot code on the sample and on the certificate should match. Say what the sample is for. A laboratory trial needs enough material for the assay, the blend and a stability pull; a capsule trial needs enough for a run on the filling machine. The quantity follows the use, and the COA page lists the tests the sample should carry. A sample that arrives without a lot code, a certificate or a storage instruction is an unidentified powder, not a qualification sample. ## Terms to settle before the order The commercial terms belong on the proforma invoice: the Incoterm, the payment terms, the documents included and the point at which risk passes. Two quality terms belong beside them. The first is the remaining shelf life at shipment, expressed as a minimum, because a long total shelf life does not help if most of it has already been used. The second is the complaint window and the retain sample, so that a disputed result can be checked against the material actually shipped. Returns and re-tests should be agreed before the first drum, not after the first disagreement. A written specification, a lot-linked certificate and a retained sample make that conversation short. The catalog quantities and packs are on the L-ergothioneine product page; the forms are compared on the grade page; the destination rules are on the compliance page; and the minimum-order term is defined in the MOQ note. ### 05 Where L-ergothioneine is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/specialty/ergothioneine/compliance/ Reviewed: 2026-11-19 L-ergothioneine is authorised as a novel food in the EU, where it appears in the Union list established by Commission Implementing Regulation (EU) 2017/2470 with category-by-category maximum levels and the label designation “L-ergothioneine”. In the US there is no novel-food list; the supplier has to document the dietary-ingredient basis, either an NDI notification or a GRAS conclusion for the material as made. The UK keeps a separate retained register. Permission, level, label and claim are four separate checks. In one lineThe EU entry permits the ingredient and fixes the level; the US asks for a basis; neither answers the label or the claim for you. ## The four checks, and where the UK sits Selling into a market raises four questions that are often conflated. Is the substance permitted there, and on what terms? Which maximum level or daily intake applies to the intended food category? What must the label say? And is the sentence the brand wants to print a permitted statement or a prohibited one? The answers do not travel together. An ingredient on the EU Union list is not thereby permitted in every food category, and a level written for a supplement is not a level for a cereal bar. A structure/function sentence that is lawful in the US is not an authorised health claim in the EU. Great Britain carried the EU novel-food list into domestic law at the end of the transition period and maintains the register separately; the entry was on the list at that date, but the GB version has to be checked in its current form. Northern Ireland applies the EU list, and a UK launch needs its own reading of the GB register. ## European Union The permission is an entry in Table 1 of the Union list, and the entry is more than a name: it states the food categories, the maximum level in each and the label designation. The authorisation covers the substance as described in that entry, so the supplier's material has to match the description and the specification. L-ergothioneine · EU Union list conditions | Food category | Maximum level | Alcohol-free beverages | 0.025 g/kg | Milk-based drinks | 0.025 g/kg | “Fresh” milk products | 0.040 g/kg | Cereal bars | 0.2 g/kg | Chocolate confectionery | 0.25 g/kg | Food supplements (Directive 2002/46/EC) | 30 mg/day, general population excluding pregnant and lactating women; 20 mg/day, children over three Two readings follow. A supplement has a daily ceiling, not a licence to use any amount: 30 mg is the maximum for the general population, with pregnant and lactating women carved out. A food format outside the listed categories is not covered, however small the dose. This is a snapshot of an amended text: read the consolidated version current on the day the label is approved. ## United States US law does not ask whether L-ergothioneine is a novel food. It asks whether the exact substance, as manufactured, is a lawful dietary ingredient. The routes are that it was marketed as a dietary ingredient before 15 October 1994, that a GRAS conclusion covers the intended use, or that a new dietary ingredient notification was submitted to the FDA at least 75 days before marketing. The basis belongs to the substance and the process, not to the name. A GRAS notice filed for one manufacturer's material does not automatically cover another manufacturer's drum, and an NDI notification describes a specific ingredient and a specific use level. The supplier should point to the route, the date and the file; the buyer should keep a copy. The FDA does not approve a dietary ingredient; a filed notification or a GRAS conclusion is a basis, and the marketer still has to be accurate. “GRAS” on a data sheet without a notice, a panel or a citation is a word, not a file. The US regulatory note sets out the route in more detail. ## The contaminant table The catalog heavy-metal limits are raw-material limits, not limits for the finished supplement; the dose converts one into the other. Heavy metals · raw material and EU supplement limit | Element | Catalog limit (material) | EU limit (food supplement) | Lead | ≤3 mg/kg | 3.0 mg/kg | Arsenic | ≤2 mg/kg | Not harmonised; Member State limits possible | Cadmium | ≤1 mg/kg | 1.0 mg/kg | Mercury | ≤0.1 mg/kg | 0.10 mg/kg A 25 mg dose of a material at the 3 mg/kg lead limit contributes 0.075 µg of lead to the day's intake, while the finished supplement has to meet the 3.0 mg/kg ceiling at its own daily dose. The raw-material limit is a purchasing gate; the finished-product limit is a legal one. Microbiology is a separate panel: aerobic plate count, yeast and mould, and the absence of E. coli and Salmonella. The catalog limits are on the COA page; the EU and UK notes expand the market rules. ## Claims and labelling In the EU, a health claim may be used only if it is authorised in the register under Regulation (EU) No 432/2012 or elsewhere in law. As of this review the register contains no authorised claim for L-ergothioneine, so the working assumption is that no health claim can be printed; check the register before any wording is drafted. The mandatory element is the designation “L-ergothioneine” on the label of the food that contains it. In the US, a structure/function statement is written and substantiated by the brand and must sit beside the DSHEA disclaimer; a disease-related claim is outside the framework in both markets. The label also has to declare the quantity: the amount of L-ergothioneine per portion, not the weight of the blend. The pure versus dilution page shows how the declared quantity and the fill weight diverge. ## The document pack A lot file for a regulated market usually contains: - A lot COA with assay, rotation, NMR identity, moisture, particle size, heavy metals and microbiology. - A TDS and purchase specification naming the L isomer, the grade and the pack. - An SDS in the 16-section format. - The EU novel-food reference for the category and level, where the EU is the destination. - The US dietary-ingredient basis (NDI or GRAS file), where the US is the destination. - Allergen, GMO, origin and residual-solvent statements, plus a third-party COA if the buyer's review requires one. Every document should carry or point to the lot number. A generic TDS and a lot-specific COA are not a matched pair unless the isomer, grade and pack agree. ## What to check before the first order - Is the exact substance covered by the destination's permission, and does the supplier's specification match the entry's description? - Is the intended food category listed, and is the daily dose below its ceiling? - Does the label carry the required designation and the amount per portion? - Is the heavy-metal result acceptable at the actual dose in the finished product, not only in the drum? - Is the US dietary-ingredient basis documented for this material and this process? - Is every statement on the label authorised or properly disclaimed? The L-ergothioneine hub carries the catalog specification, the identity page explains the tests behind the file, and the quality page shows how the lot documents are assembled. This page maps the checks; it is not a legal opinion, and the current text in the destination market decides. ### 06 How we prove an L-ergothioneine lot is the L form URL: https://nutrition.rainwoodbio.com/products/specialty/ergothioneine/identity/ Reviewed: 2026-11-19 Identity is proven in four layers: what the molecule is, which enantiomer it is, how pure it is, and what physical form the powder is in. HPLC retention plus 1H-NMR answer the first; specific optical rotation answers the second; assay and the related-substance profile answer the third; XRD and particle size answer the fourth. No single number does all four. The rotation is the layer that separates L-ergothioneine from a D-enriched or racemic material, and it is the one buyers most often leave out of the specification. In one lineThe assay counts the molecule; the rotation decides which enantiomer it is; the NMR and the crystal data close the remaining gaps. ## The four layers Identity layers · L-ergothioneine | Layer | Question | Test | What it cannot show | Molecule | Is this the right structure? | HPLC retention, 1H-NMR | The enantiomer ratio | Configuration | L, D or a mixture? | Specific optical rotation; chiral HPLC | The level of non-chiral impurities | Purity | What else is in the powder? | Assay, related substances, loss on drying, residue | Whether the main peak is the L form | Solid form | Crystal, milled or diluted? | XRD, particle size, microscopy | The configuration of the molecule The layers are independent on purpose. A lot can pass the assay and the NMR while failing the rotation, because the assay and the NMR see the molecule and not its handedness. A lot can pass the rotation and fail the related-substance profile, because a small chiral impurity does not move a bulk rotation far. The certificate has to carry all four or the file has a gap. ## Specific rotation is a ratio, not a reading A polarimeter measures an observed rotation in degrees. The specific rotation is that reading divided by the path length and the concentration, which is why the certificate has to state the conditions: the sodium D line at 589 nm, a stated temperature, a stated concentration and a stated solvent. The catalog figure is ≥ +122° at c = 1 in water. Without the conditions the number is not comparable between laboratories, and two suppliers can quote different figures for material of the same quality. The L form is dextrorotatory; the D form rotates the plane in the opposite direction by the same amount. That symmetry makes the reading a direct measure of enantiomeric excess. A lot reading about +61° under the same conditions is not half as pure — it has an enantiomeric excess of about 50%, which corresponds to roughly a 3:1 L : D ratio. The assay can still read 99.5%, because the D form has the same mass and the same NMR spectrum as the L form. The floor in the specification is a floor, not a target. A result of +122.5° passes with almost no margin, and a laboratory that measures at a different temperature or concentration can move the figure by more than that. Report the result with its conditions and compare it with the reference value measured under the same conditions. ## What XRD adds, and what it does not X-ray diffraction sees the arrangement of molecules in a crystal, not the handedness of a single molecule. The two enantiomers of ergothioneine pack into crystals that diffract identically in a powder pattern, so XRD cannot prove that a lot is the L form. What it can show is whether the material is crystalline at all. That matters for two reasons. A pure crystalline lot gives a sharp pattern; a dilution on an amorphous carrier such as maltodextrin gives a broad halo with the carrier's own features, which is one way to see that a powder sold as pure is not. And a crystalline adulterant with a distinctive pattern can be detected if it is present above the method's limit — which is why the report should state that limit rather than print “not detected” alone. Milling changes the pattern as well. An 80 mesh powder has smaller crystallites and broader peaks than a 40 mesh crystal of the same material; broadening is not adulteration. Read XRD next to the particle-size result, not instead of it. ## The routes that matter Adulteration routes and the tests that show them | Route | How it shows | Test | D-enriched or racemic material | Rotation below the floor | Polarimetry; chiral HPLC as referee | Another thioimidazole | Extra HPLC peaks, extra NMR signals | Related substances by HPLC, 1H-NMR | Dilution on a carrier | Assay low, amorphous halo | Assay, XRD, label check | “Mushroom extract” sold as pure | Low assay, many peaks, colour | Assay, NMR, rotation | Oxidation to the disulfide | Extra peak, colour drift | HPLC related substances, appearance Each route defeats a different check, which is why the panel is layered. A rotation check catches the D form but says nothing about a dilution; an assay catches a dilution but not a racemate; NMR catches a different molecule but not a small enantiomeric excess. The reliable check is the combination, not any one test in isolation. ## What to write into the specification A specification that can actually be tested reads like this: “L-ergothioneine, ≥99.5% by HPLC with the basis stated, specific optical rotation ≥ +122° (c = 1, water; wavelength and temperature stated), 1H-NMR conforms to the reference, loss on drying ≤0.5%, residue on ignition ≤0.1%, 95% through 40 mesh, no carrier.” Every clause maps to a certificate row. Three clauses are often missing and each one matters. The isomer in the name — “L-ergothioneine”, not “ergothioneine” — is the clause that makes the rotation enforceable. The basis of the assay, as-is or on the dried basis, decides whether 99.5% is a reachable number at the 0.5% moisture ceiling. And the related-substance limit, including a limit for unspecified impurities, is what stops a lot from passing on the main peak alone. For a dilution, the identity clauses belong to the pure material and the blend needs its own specification. The pure versus dilution page sets out the difference; the COA page shows where each clause appears on the certificate. ## Five questions for the supplier - Which isomer is this lot, and what is the specific rotation with its wavelength, temperature, concentration and solvent? - Is the assay by external standard or by area normalisation, and is it reported as-is or on the dried basis? - Can you supply the 1H-NMR spectrum and the reference spectrum it was compared with? - What is the related-substance profile, including the limit for unspecified impurities? - Is the material crystalline, milled or diluted, and what does the XRD report show with its detection limit? Five direct answers, backed by the certificate and the raw data, are what turn a name on a purchase order into a material that can be defended. The COA page shows where each answer appears on the certificate, the grade page covers the physical forms, and the compliance page covers the file the destination market expects. The hub carries the catalog specification, and the HPLC and XRD notes explain the methods. ### 01 What the COA for flaxseed oil powder actually contains URL: https://nutrition.rainwoodbio.com/products/fatty-acids/flaxseed-oil-powder/coa/ Reviewed: 2026-11-19 A certificate for microencapsulated flaxseed oil powder describes two materials in one: the oil inside the starch wall and the powder that carries it. It has to report alpha-linolenic acid (ALA) by GC, the oil load, moisture, peroxide value, p-anisidine value, the carrier, particle size, heavy metals and microbiology, each with a method and a release limit. The catalog specification is the gate; the batch COA is the record of what a particular lot measured. In one lineA flaxseed oil powder certificate has to put the ALA result, the oil load and the oxidation values side by side, because no one of them describes the powder. ## The certificate as a test report A line is auditable when it answers what was measured, by which method and against which limit. A line without a method cannot be repeated elsewhere; a limit without a method cannot show what the lot passed. The basis matters as much as the number, because ALA can be reported on the powder or on the oil. Identity, oil and oxidation limits · microencapsulated flaxseed oil powder 50% · CAS 8001-26-1 | Parameter | Method | Release limit | Reported on | Alpha-linolenic acid (ALA, C18:3 n-3) | GC-FID of fatty-acid methyl esters | ≥22.5% | Powder as sold | Oil load | Solvent extraction or gravimetric | 50.0% declared | Powder as sold | Moisture | Karl Fischer or loss on drying | ≤5.0% | Powder as sold | Peroxide value | AOCS Cd 8b-90 or ISO 3960 | ≤5.0 meq/kg | Extracted oil | p-Anisidine value | AOCS Cd 18-90 or ISO 6885 | ≤20.0 | Extracted oil | Carrier | Declaration; IR if disputed | Modified starch, declared | Powder as sold | Particle size | Sieve analysis | ≥95% through 40 mesh | Powder as sold | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Powder as sold | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Powder as sold The GC line needs more than a percentage. ALA is one C18:3 among several: gamma-linolenic acid is also C18:3, and heat during refining can create cis and trans isomers around the same retention window. Name the column, the methyl-ester preparation, the standard and the integration, and attach the chromatogram. ISO 12966-2 and ISO 12966-4 are the usual references. A certificate that reports one C18:3 peak without showing the separation is reporting a family, not ALA. ## Two bases: the powder and the oil ALA is measured on the extracted oil and can be calculated onto the powder; oil load is measured on the powder as sold. The figures multiply. At 50.0% oil load and ALA ≥22.5%, the oil must contain at least 45.0% ALA, because 22.5 divided by 50 is 45 — the bottom of the normal range for flaxseed oil, which leaves some room for crop variation and encapsulation losses. One gram of powder therefore carries 0.5 g of oil and at least 0.225 g of ALA; a 500 mg capsule carries about 112 mg. A label that says “flaxseed oil powder 500 mg” without the oil load and the ALA figure says nothing about the fatty acid being bought. The certificate should state the calculation and whether the result is on the powder as sold or on a dried basis. ## Release limit, batch result and the oxidation arithmetic The release limit is the acceptance boundary; the batch result is what the laboratory measured. Both belong on the page, in separate columns. A result column that repeats the specification range is a copy of the gate, not a measurement. PV measures hydroperoxides, the first products of oxidation; p-AV measures the aldehydes that follow. They move in different directions: as hydroperoxides break down, PV can fall while p-AV rises. A lot can sit inside both limits, with PV near 5 meq/kg, and still be a poor choice for a stick pack stored warm for a year. TOTOX = 2PV + p-AV reaches 30 at the catalog ceilings; that is arithmetic on the limits, not a result for any lot. Heavy metals work the same way. Individual results for lead, arsenic, cadmium and mercury are more useful than one line that says the panel passed, and microbiology should give counts and absence results rather than a single “conforms”. If a certificate gives only the conclusion, ask for the numbers. ## What moves between batches ALA moves with the seed. Flax varieties, growing region and crop year shift the fatty-acid profile, and a lot that only just clears the 22.5% floor has less headroom for the losses that follow. Oil load moves with the emulsion and the spray-drying yield: a powder formulated at 50% can measure below it if the oil is not fully retained, and the ALA result follows the oil load down even when the oil is unchanged. Oxidation moves with time, heat and oxygen between pressing and encapsulation. A lot that left the drier clean can arrive with a higher PV if the pouch is not a barrier or if it sat warm in transit. Colour and odour are less quantitative and often more revealing: a darker tint, caking or a paint-like smell points to oxidation even when the ALA assay still passes. ## When an outside test earns its place Order an independent test for a new source, a first shipment into a regulated market, a disputed release or a label claim close to the limit. The useful panel is not a full repeat; it is what the certificate leaves open. Ask for GC-FID with the chromatogram, the column, the standard and a limit of quantification; PV and p-AV by a named method; the tocopherol profile and oil load by extraction; and ICP-MS for the metals. A “not detected” line without a limit is evidence about the method, not about the sample. ## Six lines that decide whether two quotations match Six lines that separate two flaxseed oil powder quotations with the same ALA figure | Line | What to ask for | What it separates | ALA basis | The result on the powder and on the extracted oil | A measured powder from a diluted one | Oil load | Measured or calculated, on the same lot | A 50% powder from a 40% powder | GC detail | Column, standard, chromatogram and integration | ALA from total C18:3 | Oxidation | PV and p-AV, method and test date | A fresh oil from an aged one | Carrier and antioxidant | Name and level of each | A declared matrix from an unknown one | Lot trace | Lot code on COA, pack and retained sample | A real lot from a copied certificate Two quotations that agree on ALA but differ on the other five are not describing the same powder. The catalog specification sits on the flaxseed oil powder product page; the form choice is on the grade page; the tests that separate ALA from other oils are on the identity page. The methods are described in the analytical methods index, and the certificate terms in the COA glossary entry. ### 02 Flaxseed oil powder or flaxseed oil: choosing a grade URL: https://nutrition.rainwoodbio.com/products/fatty-acids/flaxseed-oil-powder/grades/ Reviewed: 2026-11-19 Flaxseed oil is sold in two forms: the bulk oil and a microencapsulated powder in which the oil is held in a starch matrix. Both carry the same oil, but they declare ALA on different bases — the oil as a percentage of oil, the powder as a percentage of powder. The powder's figure is the oil figure multiplied by the oil load, and that multiplication is the whole choice. In one lineThe oil and the powder can carry the same ALA in the oil and still declare different numbers on the label, because the powder's figure is the oil figure times the oil load. ## One oil, two delivery forms Microencapsulation does not concentrate ALA. It disperses the oil as droplets in a wall material and dries the emulsion into a powder, so the wall takes up part of the mass. At 50% oil load, half of the powder is carrier and half is oil. The product is therefore a 50% oil powder that contains at least 22.5% ALA, not a 50% ALA powder. Confusing the two is the most common specification error in this category. On the oil basis the same material would be at least 45% ALA, because 22.5 divided by 50 is 45. The powder supplier prints the lower figure because the customer weighs the powder, not the oil; both are correct, and neither is complete without the oil load. The form also decides what the customer handles. A bulk oil is pumped, weighed and filled as a liquid; a powder is weighed, blended and dispersed. The oil has no carrier to declare; the powder does. Those differences reach the ingredient list, the allergen statement and the process line, not only the specification sheet. ## What changes when the form changes Bulk flaxseed oil against microencapsulated flaxseed oil powder 50% | Dimension | Bulk flaxseed oil | Microencapsulated powder 50% | ALA basis | Percentage of oil | Percentage of powder | ALA figure | About 45–65% of the oil | ≥22.5% of the powder | Oil content | 100% | 50.0% declared | Dose forms | Softgel, capsule fill, oil blend | Capsule, tablet, stick, dry mix, beverage | Handling | Liquid; pump, weigh, clean lines | Free-flowing; weigh, blend, disperse | Oxidation exposure | Bulk surface and headspace | Surface oil plus the wall | Ingredient list | Flaxseed oil | Flaxseed oil powder, modified starch The ALA range for the oil is a reference range for the raw material, not a release limit for the powder; the powder limit is the catalog figure. The two rows are meant to be read together: a powder at its ALA floor and an oil at the bottom of its natural range describe the same oil at different dilutions. ## What the powder is like to use The catalog powder passes 40 mesh, which is about 425 µm, with at least 95% through the sieve. That is a fine powder with a large surface area, and surface area is where oxidation starts. It flows well enough for capsules and sachets, but it is not dust-free. “Dispersible” is not “soluble”. The starch wall hydrates in water and releases the oil as an emulsion; it does not dissolve into a clear solution. In a drink mix that means a milky haze, a layer on standing and a texture to design around. In a capsule or tablet the dispersion question disappears, but the oil load still limits how much powder fits in each unit. The carrier is modified starch, declared on the certificate. It is half the mass, so it is also half the tablet or capsule weight. A 500 mg capsule of this powder carries about 250 mg of oil and about 112 mg of ALA at the catalog minimum. The same capsule filled with bulk oil would carry about 225 mg of ALA. The form decision is therefore a capsule-count decision as much as a marketing one. ## The arithmetic behind a label dose The label declares ALA, not powder. To reach a stated ALA figure, divide by the concentration on the label's basis. The table does that at the catalog minima; it is arithmetic for formulation, not an intake recommendation. Powder and oil needed for a stated ALA amount at the catalog minima | ALA declared | Powder at ≥22.5% | Oil at ≥45% | 100 mg | 0.44 g | 0.22 g | 250 mg | 1.11 g | 0.56 g | 500 mg | 2.22 g | 1.11 g | 1,000 mg | 4.44 g | 2.22 g A stick pack of 2–3 g can carry a 500 mg ALA claim only if the powder is at or above the catalog minimum and the overage is designed in. A tablet has a compression limit: a 50% oil powder is soft, and a directly compressible or agglomerated grade is usually needed to reach a sensible tablet weight. Both variants are separate specifications, not pack sizes. The formula also needs an overage for ALA lost over shelf life; its size belongs in the stability file, set from measured PV and p-AV data rather than assumed. ## How to write the form into the specification A form specification has to fix the things that change the label and the process. Name the form and the oil load in the ingredient name; state ALA on the powder as sold, with the GC method and the limit; state the oil load and whether it is measured or calculated; name the carrier; set the mesh; set PV and p-AV on the extracted oil; and declare any antioxidant. Add the pack and the storage condition, because a powder specification without a pack is only half a specification. The order of the lines matters less than their completeness. A specification that gives ALA but not the basis, or the oil load but not the method, will pass two laboratories with two different numbers. The COA page shows how each line is reported, and the stability page shows which lines move first. ## When the other form is the better choice Choose the bulk oil when the dose form is a softgel or an oil blend, when the capsule has to carry the highest possible ALA per unit, when the formula has an oil phase, or when the ingredient list cannot carry a starch carrier. Choose the powder when the dose form is a stick, a sachet, a tablet, a dry blend or a beverage, or when the oil's taste and mouthfeel would dominate the product. Choose neither when the label promises EPA or DHA. Flaxseed oil carries ALA, a different fatty acid, and no amount of powder turns an ALA declaration into an EPA or DHA one. The comparison is set out on the flaxseed versus fish oil page; the packing and minimum order are on the MOQ page. The catalog specification is on the flaxseed oil powder product page, and the sieve terms are defined in the particle size glossary entry. ### 03 Microencapsulated flaxseed oil is protected, not immune; oxidation decides the shelf life URL: https://nutrition.rainwoodbio.com/products/fatty-acids/flaxseed-oil-powder/stability/ Reviewed: 2026-11-19 Microencapsulation puts a starch wall between the oil and the air, which slows oxidation; it does not stop it. ALA carries three double bonds, more than oleic or linoleic acid, so the oil inside the powder reacts faster than a monounsaturated oil would. The shelf life of the powder is set by the peroxide and p-anisidine values, the moisture and the barrier of the pack, not by the ALA assay. In one lineThe wall buys time; it does not remove the oxygen, the heat or the trace metals that drive the reaction. ## The powder in a sealed pack A dry powder is not an inert one. The oil sits in droplets inside the starch wall, and a fraction of it remains at the particle surface, exposed to the headspace from the day the pouch is sealed. Oxidation runs slowly at ambient temperature and faster with every ten degrees added, and the surface oil is where it starts. Moisture is the second slow variable. The limit is 5.0%, and the water sits in the starch wall. Above a certain water activity the wall softens, the particles cake and the oil becomes more mobile, which brings fresh oil to the surface. A pouch opened and resealed in a humid room gains moisture over weeks, so the pack size should match the use rate. The wall protects the oil only while it is intact; abrasion in a blender, high shear in a granulator or a hard compression step can crack it and expose oil the certificate never saw as surface oil. ## Once the powder is dispersed In water the protection changes shape. The starch wall hydrates, the particles soften and the oil droplets meet dissolved oxygen and whatever else is in the formula. A beverage or stick pack is harsher than the powder in its pouch, even when the powder was stable alone. Heat, light and pH act at once. A pasteurisation step, a hot fill, a transparent bottle on a lit shelf and an acidic base each add to the oxidation rate. Holding time matters too: a slurry left in a tank for hours is not the same product as one mixed and filled in minutes. The finished product therefore needs its own stability data. The ALA molecule is the reason. Its three double bonds include two bis-allylic methylene groups, the carbons between two double bonds, which oxygen attacks first. The hydroperoxides that form there break down into short-chain aldehydes — propanal among them — which is what the p-anisidine value and the sensory panel detect. A powder can lose freshness long before the ALA percentage moves. ## What drives the reaction Oxidation drivers in a microencapsulated flaxseed oil powder | Factor | Effect | Control | Heat | Raises the rate of hydroperoxide formation and breakdown | Cool storage; control the heat load in processing | Light | Photochemical oxidation at the particle surface | Opaque or metallised pack; amber bottle for the finished product | Oxygen | Headspace and dissolved oxygen feed the reaction | Barrier film; nitrogen flush where the filler supports it | Moisture | Softens the wall and mobilises the oil | ≤5.0% moisture; sealed pack; dry handling | Trace metals | Iron and copper catalyse hydroperoxide breakdown | Metal-free contact surfaces; check the mineral premix | Surface oil | Exposed oil oxidises first | Encapsulation efficiency; a low free-oil target | Antioxidant | Delays the rise but is consumed | A named antioxidant at a declared level | Carrier | Sets the wall and the free-oil level | Declared modified starch; consistent wall solids The antioxidant belongs in the specification, not a footnote: the certificate should name it and the stability file should show the tested level. An antioxidant that works in the powder can be diluted or consumed in the finished matrix, which is one reason the finished-product arm cannot be skipped. ## A stability protocol that can fail A useful study is designed to produce a failure, not to confirm a hope. Start with the lot's release values, then store samples at 40 °C and 75% relative humidity for 0, 1, 2, 3 and 6 months, with a real-time arm at 25 °C and 60% relative humidity and a frozen control. Measure PV, p-AV, TOTOX, moisture, ALA, microbiology and sensory at every point. Write the end-of-shelf-life limits before the first sample is pulled; they can be the catalog limits or tighter, but they must be numbers. A study that measures only ALA will pass while the product becomes unacceptable, because the fatty-acid content often holds while oxidation climbs. The decision rule should say which value ends the shelf life: a PV, p-AV or TOTOX ceiling, or a sensory failure. The finished matrix needs its own arm. A powder that passes in a foil pouch can fail in a stick with a thinner barrier or in a gummy with a higher water activity. Test the product as sold, in the pack it is sold in, and keep the raw data. ## What the formula adds An acidic beverage, a mineral premix, a flavour system and a heat step each change the picture. Iron and copper are the metals to watch; a fruit acid lowers pH and can hydrolyse triglycerides; a transparent bottle lets light reach the dispersion. High shear can damage the wall and release free oil, which oxidises ahead of the encapsulated fraction. Flavour is part of the measurement, not a cosmetic. The aldehydes that raise p-AV are the molecules behind rancid, painty and green notes, so a panel can detect a change before the chemistry crosses a limit. A strong flavour that masks those notes has not solved the oxidation; it has hidden it. Keep the powder dry until the last step, control the water activity of the matrix, avoid unnecessary heat and shear, and test the finished product rather than extrapolate. The powder's stability file is the starting point, not a substitute. ## How the shelf life is assigned A shelf life is a claim supported by data on a grade and a pack, not read off the ALA assay or copied from another supplier's certificate. The file should show the release values, the storage conditions, the time points and the limit that was crossed or not crossed. A declaration of 18 to 24 months is common for a microencapsulated powder in an intact foil pack. It is not a default: the figure has to come from the stability file for that grade and pack, and the data sheet states the one that applies. The 25 kg drum and the 1 kg pouch do not necessarily carry the same declaration. Cool, dry, out of direct light and resealed after opening are the usual terms. A buyer who repacks into a clear jar should expect a shorter life, and a lot held beyond its retest date should be re-analysed before use. The release values are on the COA page; the pack and order terms are on the MOQ page; the matrix questions are on the grade page. The catalog specification sits on the flaxseed oil powder product page, and the release process is described on the quality page. ### 04 Flaxseed oil powder: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/fatty-acids/flaxseed-oil-powder/moq/ Reviewed: 2026-11-19 The minimum order is 1 kg, supplied in a foil pouch from a released production lot. That unit is enough for a bench trial, a pilot batch and a retained sample, and it travels with the same lot number, COA and document pack as the 25 kg drum. Larger orders change the pack, not the specification. In one lineOne kilogram from a released lot is the qualification unit; the pack, the destination and the document set shape the order around it. ## Why the minimum is 1 kg A formulator does not need a drum to find out whether a powder disperses, tastes acceptable or compresses. A 1 kg pack covers a bench trial at 50–100 g, a small pilot at a few hundred grams and a retained sample for the file. Below that size the pack stops being a lot sample and becomes a hand-prepared portion, which is a different quality question. The 1 kg pack is drawn from a released lot rather than made as a separate batch. The lot number on the pouch is the lot number on the COA, so the ALA, PV, p-AV, moisture and micro results describe the material in the bag. A sample prepared outside the production record cannot be traced. Scale-up has one trap. A trial on lot A qualifies the material and the process, not lot B. The 25 kg drum carries its own COA, and its ALA and oxidation values sit somewhere inside the specification rather than at the trial lot's point. Re-read the COA on every production lot. ## Packs and formats Pack options for flaxseed oil powder and what each one is for | Pack | Net weight | Typical use | What to confirm | Foil pouch | 1 kg | Trial, pilot, retained sample | Lot code and COA match the pouch | Fiber drum | 25 kg | Production runs | Inner liner, seal and drum condition on arrival | Higher oil load | Quoted per specification | Compact dose forms | Oil load and ALA are re-set, not assumed | Agglomerated grade | Quoted per specification | Tabletting and dust control | Mesh, flow and compaction data for the new grade The 1 kg pouch and the 25 kg drum are the catalog packs. The two on-request formats are different specifications, not different bags: a higher oil load changes the ALA figure on the powder and the free-oil level at the surface, and an agglomerated grade changes the mesh and the flow. Each is quoted with its own specification and its own stability file. Pack integrity is part of the product. The foil pouch is the barrier that keeps the powder inside its oxidation limits, so a punctured or badly resealed pouch is a quality event, not a packaging inconvenience. On arrival, check the seal, the lot label and the drum liner. ## Lead time and what starts it The catalog grade ships in 1–7 days from released stock. The clock starts when the order and the specification are agreed, not when the enquiry arrives: the oil load, the ALA limit, the pack, the destination and the document set all have to be fixed before the lot can be allocated and the papers prepared. Two things move a line outside that window. A non-catalog specification — a different oil load, an agglomerated grade, a different carrier or an added antioxidant — has to be manufactured and released, so it is quoted with its own lead time. A destination that needs legalisation, a specific courier or a cold-chain segment adds time that is not visible from the warehouse. The quotation states the lead time for the actual order, and the order confirmation repeats it. Document preparation runs in parallel with picking. A COA, a TDS, an SDS and a source statement are normally ready with the lot; a customer-specific declaration or a legalised certificate is not, and it should be requested before the order is placed. ## Six details a quotation needs Six details that make two flaxseed oil powder quotations comparable | Detail | What to state | Why it changes the quote | Product and oil load | 50% oil powder, or the load you need | The load sets the ALA on the powder and the mass per dose | ALA limit and basis | ≥22.5% on the powder by GC, or a tighter limit | A tighter limit changes the lot selection | Quantity and pack | 1 kg, 25 kg or a mix; number of units | The pack and the unit count set the handling | Destination and Incoterm | Country, city, port or door, and the named Incoterm | Freight, documents and transit time follow | Document set | COA, TDS, SDS, source statement, any customer form | Extra declarations take time and review | Non-standard request | Agglomerated, higher load, antioxidant, carrier change | It is a new specification, not a pack variant A quotation that gives one number without these six cannot be compared with another. Two offers that both say “flaxseed oil powder 50%” can differ on the ALA limit, the oxidation limits, the carrier, the pack and the documents, and the difference will show up in the trial, not on the quote. ## Samples and the retained sample The 1 kg pack works as the sample. It should come from the same lot as the COA supplied with it, and the lot code should appear on the pouch, the certificate and the packing list. A supplier who offers a “sample lot” that is not part of the production record is offering a different material from the one that will ship. Keep a retained sample from each lot you use, sealed and labelled with the lot code, the date received and the COA reference. It is the reference for any dispute about colour, odour, flow or oxidation, and it is the first thing a laboratory will ask for. Sample freight and sample size are stated in the quotation, not assumed from the 1 kg minimum. ## Terms that belong in the order The quotation carries the commercial terms, the lot or allocation, the shelf-life date at dispatch and the document list. The purchase order should repeat the specification, not refer to it by name: oil load, ALA limit and basis, carrier, mesh, PV and p-AV limits, pack and quantity. A PO that says “as per previous order” inherits whatever changed in between. On arrival, store the powder cool, dry and out of direct light, and keep the pouch sealed between uses. Report any damage or discrepancy before the material is opened, and keep the packing list with the retained sample. The specification sits on the flaxseed oil powder product page, the release data on the COA page, the document list on the compliance page and the form choice on the grade page. Shipping terms are described on the logistics page, and the order vocabulary in the MOQ glossary entry. ### 05 Where flaxseed oil is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/fatty-acids/flaxseed-oil-powder/compliance/ Reviewed: 2026-11-19 Flaxseed oil is a conventional food ingredient, and in the EU, the US and the UK it reaches the market as a food or food-supplement ingredient rather than as a novel food or an additive. The supplement framework, contaminant limits, allergen list and claim rules differ by market; the file has to show the source and release data before the label is designed. In one lineThe oil is accepted in all three markets; the file, the limits and the label wording are what change. ## Three questions the file has to answer Compliance work reduces to three questions. Is the substance permitted in the market and dose form? Does the form need an authorisation or a novel-food assessment? What must the label and the file show? For flaxseed oil the first two are quick; most of the work sits in the third. Flaxseed oil is a food ingredient, not an E-numbered additive, so the additive lists do not apply; it is not a novel food in the EU because it has a documented history of consumption before 15 May 1997. The powder adds the carrier: modified starch is a food ingredient with its own uses and must be declared, so a file that covers only the oil is incomplete. ## European Union Food supplements are governed by Directive 2002/46/EC, which harmonises vitamins and minerals and leaves other substances, including plant oils, to national rules. A flaxseed oil supplement relies on the member state's implementation and on mutual recognition under Regulation (EU) 2019/515, so the national list for the market of sale should be checked. Contaminants are harmonised by Regulation (EU) 2023/915, which replaced Regulation (EC) No 1881/2006 and took effect on 25 May 2023; it sets maximum levels for lead, cadmium and mercury in food supplements and separate limits for oils and fats. Labelling follows Regulation (EU) No 1169/2011, including the ingredient list, nutrition declaration and allergens. Flaxseed is not on Annex II, so the oil does not trigger an allergen declaration; the carrier still has to be assessed. Claims fall under Regulation (EC) No 1924/2006: only a register entry used with its stated conditions is permitted. Check the current text before the label is signed. ## United States Flaxseed oil is sold as a dietary ingredient under DSHEA on a pre-1994 history of use, not a new-dietary-ingredient notification. The site has to meet the dietary-supplement cGMP in 21 CFR 111, and the product carries a Supplement Facts panel under 21 CFR 101.36. ALA is declared by amount per serving; there is no Daily Value, so no percentage is printed for it. A structure/function claim needs substantiation and a notification to the FDA within 30 days of marketing, under 21 CFR 101.93; a disease claim is not permitted. There is no federal maximum for heavy metals in supplements. The practical gate is state law, chiefly California's Proposition 65, where lead has a maximum allowable dose level of 0.5 µg per day. A lot that meets the EU panel can still need a Prop 65 assessment. ## United Kingdom Great Britain applies retained food-supplement rules built on the Food Supplements (England) Regulations 2003 and their equivalents in Scotland and Wales. The lists started from the EU position but are now maintained separately, so read the GB text as it stands. Northern Ireland continues to apply EU food law under the Windsor Framework, so a single UK launch can face two rule sets. Claims in GB follow the Nutrition and Health Claims (England) Regulations 2007 and the retained register. ## The contaminant panel and the catalog limits Heavy-metal limits by market and the catalog release panel | Metal | EU food supplement | US dietary supplement | UK (GB) | Catalog limit | Lead (Pb) | 3.0 mg/kg | No federal maximum; Prop 65 applies | 3.0 mg/kg | ≤3 mg/kg | Cadmium (Cd) | 1.0 mg/kg | No federal maximum | 1.0 mg/kg | ≤1 mg/kg | Mercury (Hg) | 0.1 mg/kg | No federal maximum | 0.1 mg/kg | ≤0.1 mg/kg | Arsenic (As) | No harmonised supplement maximum | No federal maximum | No harmonised maximum | ≤2 mg/kg The catalog panel is written against the food-supplement limits, not the oil limits. Regulation (EU) 2023/915 sets lower levels for some metals in oils and fats than in supplements, so the 50% oil fraction can fail a bulk-oil gate while the powder passes the supplement gate. A buyer using the powder in a conventional food should ask which limit applies. Arsenic has no harmonised EU maximum; the 2 mg/kg line is a specification limit. ## Where the claim line sits No disease claim is permitted in any of the three markets. In the EU and the UK a claim must come from the authorised register and meet its conditions; in the US a structure/function claim needs substantiation and the 30-day notification. The ALA content is a nutrient declaration, not a claim, and the two should not be confused in the artwork. This page reproduces no claim text and makes no claim for the ingredient. The test for a draft label is whether every sentence can be tied to a register entry or a notified statement, with the amount and population that the entry requires. ## The file a buyer should hold Documents that make up a flaxseed oil powder compliance file | Document | What it must show | Why it is needed | Certificate of analysis | Lot results, methods, limits, micro and metals | Release evidence for the lot | Technical data sheet | Oil load, ALA, carrier, mesh, pack, storage | The specification in usable form | Agreed specification | The limits the lot was released against | Comparison between suppliers | Source and allergen statement | Botanical source, plant part, allergen assessment | Ingredient list and Annex II review | Carrier and antioxidant declaration | Name and level of each | Label declaration and stability | GC chromatogram and oxidation data | ALA peak, column, standard, PV and p-AV | Identity and freshness evidence | Lot trace and manufacturing site | Lot code, site, date of manufacture | Recall and audit trail The certificate is the document most often read alone and least often sufficient. Read it with the specification, the source statement and the chromatogram, because each answers a question the others leave open. ## Release checklist before the label is signed Seven checks for a flaxseed oil powder file before label approval | Check | Evidence | Ingredient permitted in the market and dose form | Framework note citing the instrument | Botanical source and plant part named | Source statement from the manufacturer | Allergen assessment complete | Annex II review, including the carrier | Heavy metals inside the applicable limit | COA results by ICP-MS | Oxidation inside the agreed limit | PV and p-AV by named methods | Nutrition declaration drafted from measured values | ALA on the powder, oil load, serving size | Every claim traced to a register or a notification | Claim file with the entry reference The market framework is set out on the EU, US and UK regulatory pages; the allergen list is explained in the Annex II glossary entry and the California rule in the Prop 65 entry. The lot data is on the COA page, and the catalog specification on the flaxseed oil powder product page. ### 06 How we prove a flaxseed oil lot is the declared ALA URL: https://nutrition.rainwoodbio.com/products/fatty-acids/flaxseed-oil-powder/identity/ Reviewed: 2026-11-19 A flaxseed oil powder is declared by its ALA content, and ALA is one fatty acid inside a mixture of triglycerides held in a starch matrix. Proving the lot means showing that the GC profile, the oil load, the carrier and the oxidation state agree with that declaration — not only that one peak reached 22.5%. In one lineA 22.5% ALA result is one number; identity is the fatty-acid profile, the oil load, the carrier and the oxidation state agreeing with it. ## The four layers of identity The first layer is the document: the lot code, COA, specification and manufacturing site have to describe the same material. The second is chromatographic: a GC run that resolves ALA from the other C18 fatty acids and from its isomers. The third is compositional: oil load, moisture, carrier and particle size together say how much oil the powder contains. The fourth is provenance: seed, press, encapsulation and lot record, which separate a documented material from a certificate. No layer is sufficient alone. A GC result without the oil load cannot be converted to the powder; an oil load without a profile cannot show which oil was encapsulated; a document set without a chromatogram cannot show that the C18:3 peak was ALA. The layers are easy to check and hard to fake together. ## What the GC has to show The oil is extracted, transesterified to fatty-acid methyl esters and run on a capillary column with flame ionisation detection. The certificate should name the column, the esterification procedure, the standard and the integration. A long polar column is needed to separate the C18:3 isomers: ALA is the n-3 isomer, gamma-linolenic acid the n-6 isomer, and heat during refining can create cis and trans forms. Area normalisation expresses each peak as a share of total identified area; internal standardisation uses a known amount of a marker acid and gives an absolute mass. The certificate should say which was used and attach the chromatogram. A single ALA figure is a summary of a measurement, not the measurement; a profile that is missing the expected linoleic and oleic acids, or that carries an unexpected peak where EPA or DHA would elute, is telling you something the ALA figure does not. ## The profile as a fingerprint Flaxseed oil has a characteristic fatty-acid distribution, and the ratios between its main acids are more stable than any single percentage. The table gives published ranges for the oil, not release limits for the powder; they move with variety, origin and crop year. Reference fatty-acid ranges for flaxseed oil, as a share of total fatty acids | Fatty acid | Typical share of the oil | What it shows | Palmitic (C16:0) | 4–7% | Background saturated acid; a large rise suggests another oil | Stearic (C18:0) | 2–4% | Second saturated acid; ratio to palmitic is fairly stable | Oleic (C18:1 n-9) | 13–29% | Monounsaturated; rises in canola and olive admixtures | Linoleic (C18:2 n-6) | 11–24% | Rises in sunflower and soybean admixtures | Alpha-linolenic (C18:3 n-3) | 45–65% | The declared acid; the powder limit implies at least 45% in the oil Flaxseed oil is unusual among seed oils in carrying more ALA than linoleic acid; sunflower and soybean oils carry far more linoleic than ALA. If the ratio moves toward linoleic, the oil has been diluted with another seed oil, and the ALA figure on the powder falls first. ## Why XRD does not identify an oil X-ray diffraction sees ordered crystal lattices. An oil has no lattice to diffract, and the powder's diffractogram is dominated by the starch carrier: native starch gives A-type or B-type reflections, while an amorphous modified starch gives a broad halo. XRD can say something about the carrier's physical form; it cannot tell you whether the oil is flaxseed, and it cannot measure ALA. Infrared spectroscopy is more useful as a screen. It shows the ester carbonyl, the cis double-bond bands and, in an oxidised sample, a broad hydroxyl band from hydroperoxides. That makes it a quick check for gross oxidation, but it is not a quantitative fatty-acid assay and does not separate ALA from the other C18:3 isomers. GC remains the identity test. ## The routes that pass an ALA figure Adulteration routes for flaxseed oil powder and the test that exposes each | Route | What moves | Test that shows it | Another seed oil | Linoleic up, ALA down, tocopherol pattern shifts | Full GC profile plus tocopherols | Extra starch or carrier | Oil load down, ALA on powder down, ALA in oil normal | Oil load by extraction | Oxidised oil | PV and p-AV up, colour and odour change, ALA may fall | PV, p-AV and sensory | Added free ALA | ALA up without the glyceride pattern, acid value up | Acid value, glyceride profile | Fish oil addition | EPA and DHA peaks appear | Full GC profile Flaxseed oil is dominated by gamma-tocopherol, sunflower oil by alpha-tocopherol, so an admixture invisible in the ALA figure can show up in the tocopherol ratio. The test is worth running before a batch is rejected. Oxidised oil is the quietest route. The ALA assay can hold while PV and p-AV climb, so a lot can meet the identity limit and still be a poor material. Read identity and freshness together. ## How to write identity into the specification The identity lines belong beside the assay, not in a separate document. Write ALA as ≥22.5% on the powder as sold, by GC-FID of fatty-acid methyl esters, and state the oil load at 50.0% with the method used to measure it. Add the carrier by name, the mesh, and the PV and p-AV limits on the extracted oil. If the buyer wants a profile range, agree it as an identity range, not as a second assay. Two mistakes are common: a profile range so tight that normal crop variation fails good lots, and a certificate that reports ALA without saying whether it is on the powder or the oil. The ranges above are wide for the first reason; the COA page shows the reporting format for the second. ## Five questions for a supplier - Can you send the full GC chromatogram, with the column, the standard and the integration method, for this lot? - What is the ALA result on the powder, and what is the oil load on the same lot, measured by which method? - What are the linoleic, oleic, palmitic and stearic figures, and does the profile show any EPA or DHA? - Which carrier and which antioxidant are present, at what levels, and are they declared on the COA? - What were the PV and p-AV at release, and how has the lot been stored since? A supplier who answers all five with numbers and documents is describing a material that can be audited; one who answers with a specification sheet is describing a catalog entry. The comparison with fish oil is on the flaxseed versus fish oil page; the method background is in the analytical methods index; the catalog specification is on the flaxseed oil powder product page. ### 02.1 Flaxseed oil vs fish oil: ALA, EPA/DHA and the label URL: https://nutrition.rainwoodbio.com/products/fatty-acids/flaxseed-oil-powder/grades/flaxseed-vs-fish-oil/ Reviewed: 2026-11-19 Flaxseed oil and fish oil are both omega-3 sources, but they carry different fatty acids. Flaxseed oil is mainly alpha-linolenic acid (ALA, C18:3 n-3), while fish oil supplies eicosapentaenoic acid (EPA, C20:5 n-3) and docosahexaenoic acid (DHA, C22:6 n-3). A milligram of ALA is not a milligram of EPA or DHA, and the label has to name which one the product carries. In one lineALA, EPA and DHA are three different fatty acids; the label, the dose arithmetic and the allergen declaration follow from which one the product carries. ## Two sources, two fatty-acid profiles Flaxseed oil is pressed from the seed of Linum usitatissimum. It is a plant oil with a simple profile: five fatty acids account for almost all of it, ALA the largest. Fish oil is extracted from oily fish or fish by-products, and its profile depends on the species, the season and the refining route. EPA and DHA are the acids the supplement market names. The difference is not a matter of grade or concentration. A refined flaxseed oil and a refined fish oil are different materials at the level of the molecule, and no blending ratio turns one into the other. A blend can carry both, but then the label has to declare both. Flaxseed oil and fish oil side by side | Dimension | Flaxseed oil | Fish oil | Source | Pressed seed of Linum usitatissimum | Oily fish or fish by-products | Main omega-3 | ALA, 18 carbons, 3 double bonds | EPA, 20 carbons, 5 double bonds; DHA, 22 carbons, 6 double bonds | Typical share | ALA about 45–65% of the oil | EPA+DHA varies widely; 18/12 is a common concentrate | Allergen list | Not on the EU or UK Annex II list | Fish is on the Annex II list | Dietary pattern | Plant-derived; fits a vegetarian or vegan label | Marine; not vegetarian “Omega-3” is a family name, not an ingredient name. Two products can both say “omega-3” on the front and declare different fatty acids, amounts and allergen statements; the back of the label is where the comparison is made. ## ALA, EPA and DHA are not the same molecule ALA has eighteen carbons and three double bonds, all cis, starting at the third carbon from the methyl end. EPA has twenty carbons and five double bonds; DHA has twenty-two carbons and six. The extra chain length and double bonds change the chemistry: DHA carries one more double bond than EPA, and both are more oxidation-prone than ALA. A fish oil concentrate therefore needs a tighter oxidation specification and a more protective pack than a flaxseed powder, and the two are not compared on fatty-acid percentage alone. ALA is the parent of the n-3 family, and the body can lengthen and desaturate it toward EPA and DHA, but the conversion is limited and variable. That is a reason to declare each fatty acid on its own terms, not a reason to use one as a substitute for another. ## The arithmetic behind the label Dose comparison starts with the concentration on the label's basis. The flaxseed figures use the catalog minimum for the 50% powder and the implied minimum for the oil; the fish oil figures use a common 18/12 concentrate as an example, not a specification for every fish oil. ALA and EPA+DHA delivered per gram and per 500 mg capsule | Material | Per 1 g | Per 500 mg capsule | Flaxseed oil powder 50%, ALA ≥22.5% | 225 mg ALA | about 112 mg ALA | Flaxseed oil, ALA ≥45% | 450 mg ALA | 225 mg ALA | Fish oil 18/12 | 180 mg EPA + 120 mg DHA | 90 mg EPA + 60 mg DHA To match 300 mg of EPA+DHA from an 18/12 oil, the label needs 1 g of that oil. To match 300 mg of ALA, the label needs 1.33 g of the 50% powder or 0.67 g of the oil. The numbers are close enough to look interchangeable on a spreadsheet and are not interchangeable on a label: the nutrient names differ and the body does not handle them as the same input. The powder adds one more step. A 500 mg capsule of powder carries only 250 mg of oil, so the ALA per capsule is half what the same capsule would carry as bulk oil. That is the trade-off of the dry form. ## What the label has to say In the EU the nutrition declaration may list omega-3 fatty acids as a group or ALA, EPA and DHA individually, with the amount in the product as sold. In the US the Supplement Facts panel lists the fatty acids by amount per serving; there is no Daily Value for any of the three, so no percentage is printed. Both markets require the source in the ingredient list, and a powder requires the carrier. The allergen line is the clearest difference. Fish is on Annex II to Regulation (EU) No 1169/2011, on the US major-allergen list and on the UK retained list, so a fish oil product carries a fish declaration unless a documented exemption applies. Flaxseed is not on those lists, so a flaxseed oil product does not trigger an allergen declaration for the oil itself; the carrier still has to be assessed. A vegetarian or vegan claim follows the source, not the nutrient: flaxseed oil is plant-derived, fish oil is not, and the claim does not change the fatty-acid declaration. ## The regulatory route Both oils are sold as food or food-supplement ingredients in the three markets, and neither needs a novel-food authorisation in the EU on the basis of its pre-1997 history. The claim rules are where they part. The EU and UK registers carry separate entries for ALA and for EPA+DHA, each with its own conditions of use, and a claim authorised for one nutrient cannot be carried by the other. The contaminant file also differs by source. A fish oil concentrate is usually tested for oxidation, PCBs, dioxins and heavy metals on top of the fatty-acid panel; a flaxseed oil powder is tested for metals, oxidation values and the carrier. The two files are not interchangeable. The market rules are set out on the flaxseed compliance page and the EU, US and UK framework pages. ## When to choose which Choose flaxseed oil when the label declares ALA, when the product has to be plant-derived, when the dose form is a dry stick, tablet or beverage, or when a fish allergen declaration is unacceptable. Choose fish oil when the label declares EPA or DHA, when the capsule has to carry a meaningful amount of those acids in a small unit, or when the product already carries a fish allergen statement. Choose neither when the label's nutrient and the oil's nutrient do not match. The useful comparison is per serving, on the same basis, with the fatty acid named. The catalog specification for the powder is on the flaxseed oil powder product page; the ALA identity tests are on the identity page; the fish oil equivalent is on the fish oil powder product page. ### 01 What the COA for MCT powder actually contains URL: https://nutrition.rainwoodbio.com/products/fatty-acids/mct-powder/coa/ Reviewed: 2026-11-19 An MCT powder certificate has to describe the oil, the matrix around it and the state of the lot at the same time. The lines that do that are oil load, C8 and C10 on the oil, moisture, peroxide value, carrier, particle size and contaminants. The catalog limits are MCT oil ≥50.0%, C8 55.0–65.0% and C10 35.0–45.0% of oil by GC, moisture ≤5.0%, PV ≤1.0 meq/kg and ≥95% through 40 mesh. The batch COA confirms those values for one lot; the catalog range is the gate. In one lineThe 50% line says how much oil the powder carries, but only the C8/C10 split and the peroxide value say what that oil is like. ## The certificate as a line-by-line record A line can be audited when it names the parameter, the method and the limit. A number without a method cannot be reproduced; a limit without a result cannot show what the lot measured. The header should carry the product, oil load, CAS 73398-61-5 and a lot code that also appears on the pack and retained sample. Composition and physical limits · microencapsulated MCT oil powder 50% | Parameter | Method | Release limit | Appearance | Visual | White to light yellow, free-flowing powder | MCT oil | Extraction and gravimetry | ≥50.0% | C8 (caprylic acid) | GC, calculated on the oil | 55.0–65.0% of oil | C10 (capric acid) | GC, calculated on the oil | 35.0–45.0% of oil | Moisture | Gravimetric, vacuum oven | ≤5.0% | Carrier | Declaration and starch identification | Modified starch, declared | Particle size | Sieve analysis | ≥95% through 40 mesh Oxidation and safety limits · microencapsulated MCT oil powder 50% | Parameter | Method | Release limit | Peroxide value | Titrimetric, AOCS Cd 8b-90 or ISO 3960 | ≤1.0 meq/kg | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent The oil load is gravimetric: the oil is extracted and weighed. C8 and C10 come from a separate GC run on that extracted oil, which is why the certificate expresses them “of oil” and not “of powder.” The two calculations answer different questions. ## What the 50% figure measures Fifty percent is the oil load, not the sum of C8 and C10. One gram of powder carries at least 0.50 g of MCT oil, and the fatty acids are a fraction of that oil. At the catalog limits, the powder contains 27.5–32.5% C8 and 17.5–22.5% C10, calculated by multiplying the oil figure by the fatty-acid result. Those are powder-basis figures; a label that declares C8 or C10 per gram needs this conversion. The C8 and C10 ranges are separate limits, not a composition that adds to 100% at every point. A lot at C8 65.0% and C10 45.0% cannot exist, because they would exceed the oil. The ranges define the window for each fatty acid; the balance is other fatty acids present in the oil, and the certificate should show the full GC profile if the buyer needs to see it. The basis also matters. Results are normally reported on the powder as sold; a dried basis reads higher because the water has been removed, by up to about five relative percent at the 5.0% moisture limit. State the basis once and use it for the label calculation. ## Release limit, batch result and the peroxide value The release limit is the boundary for acceptance; the batch result is the measured value. Keep the two in separate columns. A result column that repeats the specification is a copy of the gate, not a measurement. The useful certificate shows result, method and limit side by side. Peroxide value is the oxidation line that matters most here. The 1.0 meq/kg limit is tight, and a lot released at 0.9 has little room to move in transit and storage. PV measures hydroperoxides, the first products of lipid oxidation; a low result does not describe flavour or later oxidation, so for a flavour-sensitive application ask for a secondary oxidation figure and a sensory check. The heavy-metal and microbiology panels are release gates too. Individual results are more useful than a sentence that says the panel passed; the reader should be able to reach that conclusion from the numbers. ## What moves between batches The C8/C10 result moves with the oil source and the fractionation. Coconut and palm kernel oils do not carry the same distribution, and the cut decides how much C8 and C10 are collected. A source change can still land inside the range, with a different midpoint. The oil load moves with the emulsion and the dryer. More oil can raise the load, but it also raises surface oil and the risk of blocking the dryer. Carrier quality, solids and homogenisation move the result; moisture moves with the drying endpoint and packing humidity, and particle size with the mill and sieve. Peroxide value moves with heat, oxygen and time. A lot that leaves the plant clean can arrive above the ceiling if the pouch is not a barrier or if the drum is stored warm. Colour and odour are less quantitative, but a darker tint or a rancid note is a reason to reread the PV. ## When an outside laboratory earns its place Order an independent test when the source is new, when a lot first enters a regulated market, when the carrier changes or when a result is disputed. The panel should close what the certificate leaves open: the full fatty-acid profile with chromatogram, oil load by extraction, PV by a named method, moisture, heavy metals, microbiology and a starch identification. Ask the laboratory to report its limit of quantification and attach the chromatogram. A “not detected” entry that omits the limit describes the method, not the sample. The GC report should name the column, the detector, the standard and the integration method; without those, two laboratories can disagree about one lot. ## Six lines to compare between suppliers Two quotations that agree on 50% can still describe different powders; compare these six lines. Six lines that decide whether two MCT powder offers describe the same material | Line | What to ask for | What it separates | Oil load | Result and method, on the same lot | A measured load from a copied specification | C8 and C10 | Separate results, calculated on the oil, with chromatogram | A declared profile from a total MCT figure | Carrier | Modified starch identity and inclusion rate | A declared matrix from an undisclosed blend | Oxidation | PV result, method and date of analysis | A fresh lot from one released near the ceiling | Moisture and mesh | Moisture and sieve result on the lot | A free-flowing powder from one that will cake | Traceability | One lot code across COA, pack and retained sample | A certificate from a different lot The catalog ranges are on the MCT powder product page. The oil load options are compared on the grade page, and the checks that distinguish one MCT oil from another are on the identity page. The COA glossary defines the certificate terms, and the loss-on-drying entry explains the moisture basis. ### 02 50% or 70% MCT powder: choosing an oil load URL: https://nutrition.rainwoodbio.com/products/fatty-acids/mct-powder/grades/ Reviewed: 2026-11-19 MCT powder is sold by oil load, and the load is the first choice a buyer has to make. A 50% grade carries at least half its weight as MCT oil dispersed in a modified starch matrix; a 70% grade carries more oil and less carrier. Both can be specified with the same C8/C10 ranges because that profile belongs to the oil, but the powder around the oil changes: the weight per dose, the flow, the surface oil and the label arithmetic all move with the load. In one lineThe oil load sets how much powder delivers a gram of MCT; the C8/C10 ranges stay with the oil, but the carrier, the flow and the oxidation exposure change with the load. ## Why the oil load is a separate decision Oil load is not purity. A 50% powder is not half-strength MCT in the sense that a 70% powder is a better material; it is a different balance between oil and carrier. The load sets the mass of powder needed for a declared amount of MCT, the amount of starch that reaches the label, the surface area of oil exposed to oxygen and the way the powder flows and disperses. The catalog grade is the 50% powder. A 70% grade is available on request and is quoted against its own specification, not against the 50% certificate. Agglomerated versions are also made on request; agglomeration changes particle size and flow, not the oil load. A buyer who needs 70% should ask for that grade's oil load, moisture, PV and particle-size limits and keep them as a separate file. ## 50% and 70% side by side Oil load options · what changes between a 50% and a 70% MCT powder at the same oil profile | Line | 50% catalog grade | 70% grade, on request | MCT oil | ≥50.0% | About 70% | Carrier | Balance, mainly modified starch | Less carrier per gram | C8 per gram | 275–325 mg | 385–455 mg | C10 per gram | 175–225 mg | 245–315 mg | Powder per 1 g oil | 2.0 g | About 1.43 g | Flow and dispersion | Easier to dry and blend | More surface oil; tighter process | Typical use | Sticks, capsules, blends | Concentrated blends, smaller doses The milligram figures are arithmetic from the oil load and the C8/C10 range, not a second specification. They show why two powders cannot be compared by weight alone: a 3 g stick of the 50% grade carries about 1.5 g of oil, while the same 3 g of a 70% grade carries about 2.1 g. The C8 and C10 figures scale with the oil, not with the total powder weight. ## What the load does to the powder Surface oil is the part that matters. At a higher load, the emulsion has more oil to stabilise, the droplet size is harder to hold and more oil sits at the surface. Surface oil meets oxygen first; it also makes the powder tacky, reduces flow and can cause ringing or a heavier mouthfeel in a drink. A 50% grade is more forgiving in a simple blender; a 70% grade may need agglomeration or a tighter dryer recipe to reach the same 40 mesh result. The catalog grade targets ≥95% through 40 mesh. A 70% grade should carry its own mesh line, because the higher load can change the particle surface. The sieve result describes the particle, not the oil load; a 70% powder can pass the same sieve and still flow differently. The powder is dispersible, not soluble: in water the starch wall hydrates and the oil is released as droplets. A higher load leaves less starch to hold the dispersion, so the same mixing time may not give the same appearance. ## The arithmetic on the label At 50%, 2 g of powder delivers 1 g of oil. A 500 mg capsule holds 250 mg of oil; a 1 g stick holds 500 mg; a 3 g stick holds 1.5 g. At 70%, 1.43 g of powder delivers 1 g of oil, so a 500 mg capsule holds 350 mg and a 3 g stick holds 2.1 g. These are oil figures; the C8 and C10 figures are 55–65% and 35–45% of the oil figure. If the label declares MCT oil per serving, the powder weight is the declared amount divided by the oil load. If it declares C8 and C10 separately, multiply again by the fatty-acid result. Use the release floor, not the midpoint, so the label remains true across lots. In the EU the nutrition declaration carries fat and saturates, and the modified starch adds carbohydrate; in the US the panel is Nutrition Facts or Supplement Facts, depending on the product type. The C8/C10 split is not a separate nutrition line in either market. It belongs in the ingredient description, on the specification or on a technical page, not in the nutrition panel. That is another reason to write the load and the profile separately: one drives the label weight, the other describes the oil. ## Writing the load into the specification A load absent from the specification is not controlled. The specification should put the oil load, fatty-acid basis and carrier in lines that can be tested together. Specification lines that fix the oil load and the profile | Item | What to specify | Effect | Oil load | MCT oil ≥50.0% (70% grade: about 70%) | Sets the powder weight per dose | C8 | 55.0–65.0% of oil by GC | Fixes the profile, not the powder | C10 | 35.0–45.0% of oil by GC | Completes the declared ratio | Carrier | Modified starch, type declared | Explains the balance and the label | Moisture and PV | ≤5.0%; ≤1.0 meq/kg | Protects flow and flavour | Particle size | ≥95% through 40 mesh | Sets the physical form For a 70% grade, do not copy the 50% sheet and change one number. The higher load changes the surface oil, the drying window and the moisture pick-up, so the 70% grade needs its own moisture, PV, mesh and stability data. The C8/C10 ranges can stay the same because they describe the oil, but the batch COA has to be issued against the grade that was made. ## When the higher load is not the answer A higher load is not automatically right. If the formula needs a free-flowing powder at a high inclusion rate, the 50% grade gives the blender more carrier and less surface oil. If the formula has little room for carrier, the 70% grade helps; if the carrier is part of the texture or the dispersion, the 50% grade may be easier to use. If the pack is a small stick and the dose is modest, the 50% grade may already fit. The 70% grade earns its place when the dose per gram has to be higher, when the capsule or sachet has a fixed fill weight, or when the formula has no room for the extra starch. Neither grade is better in general; the load is a fit question. The product page carries the catalog specification, the COA page explains how the load and the profile are reported, and the C8 vs C10 page covers the ratio itself. The stability page explains why the higher load needs a tighter pack. ### 03 Microencapsulated MCT is stable, but the carrier and moisture decide the rest URL: https://nutrition.rainwoodbio.com/products/fatty-acids/mct-powder/stability/ Reviewed: 2026-11-19 Microencapsulation puts a starch wall between the oil and the air, and that wall is why MCT oil can be handled as a free-flowing powder. It is not a seal. Moisture softens the wall, heat speeds oxidation and the pack decides how much water and oxygen reach the powder. The catalog limits of moisture ≤5.0% and PV ≤1.0 meq/kg are release gates; a shelf life has to be supported by stability data on the lot and the pack, not inferred from those two lines. In one lineThe wall slows oxidation and water uptake; the carrier, the moisture and the pack decide whether the powder is still free-flowing at the end of its shelf life. ## The dry powder: moisture comes first Modified starch is hygroscopic. In a sealed pouch the powder equilibrates with the headspace; once the pouch is opened, it equilibrates with the room. Water acts as a plasticiser: it lowers the glass transition of the starch wall, makes the particles stick and turns a free-flowing powder into a caked one. The 40 mesh result at release says nothing about the mesh after a week in an open bag. The moisture limit of 5.0% is a ceiling, not a target. A lot at 4.5% has little headroom for a humid filling room; a lot at 2% has more. Ask for the moisture result on the lot, the packing humidity and the pouch specification. A foil pouch with a sealed seam is a different barrier from a metallised film or a paper bag, and the pack belongs in the stability case. Clumping is the visible failure. The earlier signal is a rise in moisture and a drop in flow. If the powder is blended with other hygroscopic ingredients, the blend's water activity matters more than the MCT powder alone. ## Once dispersed: the oil is exposed The powder is dispersible, not soluble. In water, the starch wall hydrates and the oil droplets are released into the continuous phase. From that moment the oil has a large surface area and much less protection than it had in the dry particle. Shear, warm water, a hold tank and a high-speed mixer all shorten the window. For a beverage, mix close to the point of filling, keep the slurry cool and do not hold it for a long shift. For a dry blend that is reconstituted by the consumer, the finished powder's moisture and the sachet barrier decide the shelf life; the consumer's water is only the last step. Taste is the practical test: an oxidized oil shows up as a stale or off note before a PV result is available. ## Five factors that move the shelf life What drives MCT powder degradation · effect and control | Factor | What it does | What to control | Oxygen | Reacts with surface oil; PV rises | Barrier pouch, sealed drum, low headspace | Heat | Speeds oxidation and moisture migration | Cool storage, short warm exposure | Light | Can accelerate rancidity in exposed oil | Opaque pack, dark store | Moisture | Plasticises the wall; caking and flow loss | Moisture limit, dry room, sealed pack | Trace metals | Catalyse oxidation at low levels | Heavy-metal panel; avoid reactive contact Surface oil is the common path through all five. The oil at the particle surface has no starch wall over it, so it meets oxygen first. A higher oil load usually means more surface oil, which is one reason a 70% grade needs a tighter process and a better pack than the 50% grade. ## A stability protocol that answers the question Run the powder in the pack it will be sold in. A protocol that tests loose powder in a glass jar answers a different question. The useful design is a baseline plus 1, 3, 6 and 12 months at 25 °C/60% RH, with an accelerated arm at 40 °C/75% RH for early signal. If the market is tropical, add a 30 °C/75% RH arm. At each point, test moisture, PV, appearance, flow or sieve, and the microbiology set. Add a sensory check and a free-oil or surface-oil figure if the application is flavour-sensitive. Keep a retained sample from the same lot and store it beside the test samples. The result is a curve, not a pass or fail at one point; the shelf life is the point where the curve still meets the specification with a margin. Accelerated data is a screening tool. A powder that passes 40 °C/75% RH for three months has useful evidence, but the labelled shelf life should rest on real-time data at the declared storage condition. ## The formula around the powder The powder is rarely alone. A stick may also contain a protein, a mineral salt, an acidulant and a flavour. Each of those changes the water activity and the local chemistry. An acidic component can lower pH and change the starch wall; a mineral salt can bring trace metals into contact with the oil; a hygroscopic sweetener can pull water from the MCT particles or release it to them. If the grade contains an antioxidant, it should be declared, with its name and level. The catalog specification names modified starch as the carrier; any additional processing aid or antioxidant belongs on the technical data sheet and the label. A buyer should not assume protection that is not in the specification. ## What shelf life can be supported The shelf life is the period the supplier can support with data for the material in its pack. Ask for the figure, the storage condition and the test panel behind it. A shelf-life date on a drum is not the same as a stability study, and a study on a different oil load or carrier is not transferable. Store the powder cool, dry and sealed, away from strong odours. Once a pouch is opened, reseal it, keep it dry and use it within the working period the supplier states. The COA page explains the release limits; the MOQ page covers the pack sizes; the compliance page covers the document file. The loss-on-drying glossary entry explains why the moisture basis matters, and the grade page sets out the oil load options. ### 04 MCT powder: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/fatty-acids/mct-powder/moq/ Reviewed: 2026-11-19 The minimum order for this MCT powder is 1 kg, in a foil pouch. That pack is a qualification unit: it is enough for a bench trial and a small pilot, and small enough to test a lot before a 25 kg drum is committed. Lead time is 1–7 days for a released lot. A 70% grade or an agglomerated version is made against its own specification and should be scheduled separately, not assumed inside the standard window. In one lineOne kilogram is the qualification unit; the 25 kg drum is the same material in a production pack, and the quotation is built on the specification, not on the pack size alone. ## Why the minimum is 1 kg A 1 kg pouch is large enough to run a dispersion trial, a stick or capsule fill trial, and a small stability arm, with material left for a retained sample. It is also small enough that a buyer can compare two lots or two oil loads without carrying a drum. The unit is drawn from a released lot, so the COA that comes with it describes the material in the bag. The 25 kg drum is not a different product. It is the same powder in a production pack, with the same lot code system and the same certificate. The step from pouch to drum is a scale decision, not a specification change. A buyer who has qualified the 1 kg lot can move to the drum without reopening the formulation, provided the drum is from the same specification and a lot COA is supplied. ## Packs and what they protect Pack options · what each unit is for | Pack | Typical use | What to confirm | 1 kg foil pouch | Sample, bench trial, small pilot | Seam, barrier film, lot label, reseal | 25 kg fiber drum | Production run, blending | Inner liner, closure, pallet and storage Both packs should carry the product name, oil load, C8/C10 range, carrier, lot code, production date, shelf-life date and storage condition. The label should not stop at the product name: the oil load and the C8/C10 profile are the two lines that let a warehouse check the bag against the purchase order. The pack is part of the stability case. A foil pouch and a fiber drum with a liner are barriers; a bag that is folded over is not. If the destination is humid, ask for the barrier specification and a desiccant policy before the order, not after the first caking complaint. ## Lead time and what sits behind it The 1–7 day figure applies to a released lot in a standard pack. It covers picking, labelling and the document pack; it does not cover the forwarder or customs. A destination outside the country adds transit time that the supplier does not control. A 70% grade, an agglomerated grade or a custom carrier is a production order. The lead time depends on the run schedule and the specification, and it should be quoted with the order rather than borrowed from the standard grade. Ask for the release date and the COA date before the shipment is booked; a certificate issued after the goods arrive is a different document flow. ## Six details a quotation needs A quotation is only comparable when it names the material. Six details make that possible. Six details to put in a quotation request | Detail | What to state | Product and oil load | Microencapsulated MCT oil powder, 50% or 70% | Profile | C8 55–65% and C10 35–45% of oil by GC, or the profile you require | Quantity and pack | 1 kg pouch, 25 kg drum, or both | Destination | Country and postcode, for the document and delivery route | Application | Stick, capsule, blend or beverage, so the mesh and carrier fit | Documents and timing | COA, TDS, SDS, allergen statement; required delivery date The reply should state the specification, the pack, the lead time and the documents included. It should not leave the oil load or the C8/C10 basis to a later email; those are the lines that decide whether the material fits the label. ## Samples and qualification The 1 kg pouch is the practical sample size because it is the smallest unit released from a lot. Ask for the lot COA with the sample, and test the things the certificate cannot show: how the powder disperses in the intended liquid, whether it floats or sinks, how it tastes at the intended dose, and how it flows in the filling line. Keep a retained portion of the sample; if a later drum behaves differently, the retained pouch is the reference. A sample from a pilot batch is useful for development, but it is not a release sample. Ask whether the sample is from a production lot and whether the COA is a release certificate or a development report. ## Terms to settle before the PO Put the specification on the purchase order, including the oil load, the C8/C10 basis, the carrier, moisture, PV and mesh. Name the document pack and the acceptance route. Agree the shelf life and the storage condition at delivery, and the lot traceability requirement: one lot code across the COA, the pack and the retained sample. Agree how a result outside the specification is handled, how a retest is arranged and how a replacement lot is issued. If the order is for a 70% grade or an agglomerated version, attach its own specification rather than the 50% catalog sheet. The grade page sets out the load options; the compliance page lists the documents a market may ask for; the COA page explains the certificate lines. The product page carries the catalog specification and the lead-time glossary entry defines the term. ### 05 Where MCT powder is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/fatty-acids/mct-powder/compliance/ Reviewed: 2026-11-19 MCT oil is a food ingredient with a long history of use, and a 50% microencapsulated powder can be sold as an ingredient for food supplements in the EU, the US and the UK. Permission is rarely the obstacle. The file is the obstacle: the source oil and its allergen position, the legal status of the modified starch carrier, the contaminant data, the label declaration and the absence of a disease claim. The three markets do not ask for the same file, and the UK has to be checked separately from the EU. In one lineMCT powder is permitted in all three markets; the source declaration, the carrier's status and the claim wording are what decide whether the file supports the label. ## Three markets, three instruments The EU regulates the powder under food law and, when it is sold in dose form, under the food supplements directive. The US regulates a supplement under DSHEA and the current good manufacturing practice rules for dietary supplements. The UK applies retained EU law in Great Britain, with Northern Ireland following the EU regime. In each market the ingredient status and the finished-product status are separate questions, and the label rules follow the finished product. In Great Britain, the food supplements regulations and the retained nutrition and health claims rules apply; Northern Ireland follows the EU texts. A GB label and an NI label can therefore diverge on claims and on some labelling details, so a product sold across the UK needs both checked. The statements here are a summary as of this review. Contaminant limits, labelling guidance and claim lists change; check the current text before a launch. ## European Union MCT oil is used as a food ingredient and has a history of use before the novel food cut-off, so the oil itself does not need a novel food authorisation. The powder is not automatically covered by that history: the carrier, any antioxidant and the microencapsulation process have to be assessed on their own. Modified starch must be an authorised additive or a permitted ingredient for the intended use, and the specification should name the type, not only “modified starch.” For a supplement, Directive 2002/46/EC sets the framework; Regulation 1169/2011 governs the label; Regulation 1924/2006 governs claims; Regulation 2023/915 sets contaminant limits; Regulation 2015/2283 governs novel foods. The source oil matters for the allergen file: coconut and palm kernel are not on the EU Annex II list. That does not remove the need for a source statement, and it does not cover a carrier or a processing aid that carries its own allergen. ## United States A dietary supplement is regulated under DSHEA, with cGMP in 21 CFR 111 and labelling in 21 CFR 101. The ingredient statement, the Supplement Facts panel and the allergen statement are the three label elements that most often decide a launch. Coconut is classified as a tree nut for US labelling; a highly refined oil derived from coconut may fall within the refined-oil exemption, but the supplier has to document the basis rather than leave the buyer to assume it. Structure/function claims are permitted for a supplement with the required disclaimer and must be truthful and not misleading. A disease claim is not permitted. The line between the two is a labelling question, not a formulation question, and it should be reviewed before the artwork is final. ## Contaminants and the limits that matter The catalog panel is a release gate, not a statement of every legal limit. The limit that applies depends on whether the powder is sold as a food supplement or used as an ingredient in a conventional food, and on the market. Catalog limits and what the buyer still has to check | Parameter | Catalog limit | What to check | Lead | ≤3 mg/kg | Finished-product limit for the market and category | Arsenic | ≤2 mg/kg | Market-specific limit or customer specification | Cadmium | ≤1 mg/kg | Finished-product limit for the market and category | Mercury | ≤0.1 mg/kg | Finished-product limit for the market and category | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Finished-product specification and market guidance | Peroxide value | ≤1.0 meq/kg | Shelf-life headroom, not only release For a refined oil, also ask for the process-contaminant data the market requires, such as 3-MCPD and glycidyl esters, and for the PAH panel where the oil source makes it relevant. These are not lines on the catalog COA; they are questions for the supplier's food-safety file. ## Where the claim line sits The defensible statements about this powder are compositional: the oil load, the C8/C10 profile, the carrier, the fat content and the physical form. Those statements can be checked against the COA and the specification. A statement about what the powder does in the body is a different category, and it needs the evidence and the wording that the market allows. On the nutrition panel, the oil contributes fat and saturated fat; the modified starch contributes carbohydrate. The C8/C10 split is not a separate nutrition line in the EU or the US; it belongs in the ingredient description or the specification. Avoid turning the ratio into an implied health claim. The label should describe the material, not promise an outcome. ## The file a buyer should hold A market-ready file usually contains: the specification, the batch COA, the technical data sheet, the safety data sheet, the allergen and source statement, the carrier declaration, the heavy-metal and microbiology results, the shelf-life statement and the storage condition, a manufacturing flow chart and the lot traceability record. Add a GMO statement, a halal or kosher certificate or a country-of-origin declaration only where the market or the customer asks for it. The file should be internally consistent. The oil load on the COA, the TDS and the label should be the same figure. The carrier named on the TDS should be the carrier in the allergen and additive review. The lot code on the COA should match the pack and the retained sample. Inconsistency is a common reason a file fails a customer audit, not a missing document. ## A launch checklist - Confirm the market and whether the product is a supplement or a conventional food. - Name the oil source and check the allergen position for that source. - Name the modified starch and confirm its additive or ingredient status. - Check the contaminant limits against the finished product, not only the powder. - Check the nutrition declaration and the ingredient name. - Review every claim against the permitted list and the evidence. - Match the lot code across COA, pack and retained sample. - File the TDS, SDS, COA, allergen statement and shelf-life data together. The COA page explains the certificate lines; the MOQ page covers the order file; the identity page covers the C8/C10 evidence. The market summaries are on the EU, US and UK pages, and the quality page describes the release route. ### 06 How we prove an MCT lot is the declared C8/C10 profile URL: https://nutrition.rainwoodbio.com/products/fatty-acids/mct-powder/identity/ Reviewed: 2026-11-19 An MCT lot is the declared material when four things line up: the oil is a triglyceride mixture with the declared C8/C10 profile, the powder carries the declared oil load, the carrier is the declared modified starch and the lot is not oxidized. The GC profile is the centre of that case, but it is not the whole case. GC describes the oil that was extracted; it does not say how much oil the powder contains, and it does not identify the carrier. In one lineIdentity is the C8/C10 profile, the oil load, the carrier and the oxidation state read together; a single “MCT” line proves none of them. ## Four layers of identity A certificate that reports only “MCT oil 50%” leaves three questions open. The four layers below close them, and each layer needs its own test or document. Identity layers for a microencapsulated MCT powder | Layer | Test or document | What it proves | Oil identity | Specification, source statement, CAS 73398-61-5 | A medium-chain triglyceride oil of the declared source | Fatty-acid profile | GC of the extracted oil, C8 and C10 separately | The declared C8/C10 range and ratio | Oil load | Extraction and gravimetry | The declared amount of oil in the powder | Carrier and condition | Starch identification, moisture, PV, mesh | The matrix is as declared and the lot is not oxidized The order matters. A GC profile on a sample of oil proves the oil; it does not prove that the powder contains 50% of it. An oil load without a profile proves the amount but not the identity of the oil. The two tests are complementary, and a supplier should be able to show both on the same lot. ## The C8/C10 ratio is the fingerprint The catalog ranges are C8 55.0–65.0% and C10 35.0–45.0% of the oil. At the edges, the ratio runs from about 1.2:1 to about 1.9:1; the midpoint is 60:40. Both edges are inside the specification, so the ratio is a window, not a single number. A buyer who needs a tighter window, for a label statement or a sensory target, should write it as a separate line rather than assume the catalog range delivers it. The oil is not only C8 and C10. The balance is other fatty acids, and the GC report should show them if the buyer needs to see the whole picture. A C8-enriched oil made by adding pure C8 is a different specification, not automatically an adulteration, but it will sit at the top of the C8 range and the bottom of the C10 range. The certificate should say what was done, not only the final percentage. The source oil does not fix the ratio by itself. Coconut oil and palm kernel oil are both raw materials for MCT, and the fractionation cut decides the C8/C10 split. That is why the ratio belongs in the specification as a range, and why a source change that is not written into the specification is a material change. ## Why XRD is not the identity test here X-ray diffraction identifies crystalline phases. In a powder it can show whether the starch carrier is crystalline or amorphous, and it can detect a crystalline mineral filler. It cannot distinguish C8 from C10, and it cannot measure the oil load. For an MCT powder, XRD is a useful check on the carrier and on foreign crystalline material, not a test of the oil's identity. The identity test for the oil is GC. The identity test for the carrier is a starch identification, supported by the specification. The identity test for the load is extraction and gravimetry. A supplier who offers an XRD pattern as proof of MCT identity has answered a different question. ## Adulteration patterns The common substitutions are not exotic. They are a different oil, less oil, older oil and a shifted profile. Adulteration patterns and the test that exposes them | Pattern | What it looks like | Test or check | Source oil | Palm kernel or another oil in place of the declared source | Full GC profile; fatty acids outside the C8/C10 window | Low oil load | More carrier, a 50% claim on a 40% powder | Extraction and gravimetry on the same lot | Oxidized oil | A clean profile with a high PV or a stale odour | PV by a named method, sensory check, date of analysis | Shifted profile | C8 added or a C10-rich fraction used | C8 and C10 separately, ratio, full chromatogram A fifth pattern is a carrier substitution: maltodextrin or a different starch in place of the declared modified starch. It shows up in the starch identification and in the mass balance, and it matters for the label and for the allergen review. ## How to write identity into the specification The specification should define the oil, the load and the matrix in lines that can be tested. A line that says “MCT powder” without a C8/C10 range and an oil load is a category, not a specification. Specification lines that make identity enforceable | Line | What to write | Oil identity | Medium-chain triglycerides, CAS 73398-61-5, source stated | C8 | 55.0–65.0% of oil by GC | C10 | 35.0–45.0% of oil by GC | Oil load | ≥50.0% by extraction | Carrier | Modified starch, type declared | Oxidation and moisture | PV ≤1.0 meq/kg; moisture ≤5.0% | Particle size | ≥95% through 40 mesh The lines work as a set. If the oil load moves, the C8 and C10 figures on the powder move with it. If the carrier changes, the starch identification and the label change. If the source changes, the allergen file and the ratio may change. A specification that controls only the oil load leaves the other three layers open. ## Five questions for the supplier - What are the C8 and C10 results on the lot, calculated on the oil, and can you send the chromatogram? - What is the oil load by extraction on the same lot, and which method was used? - Which modified starch is the carrier, and what is its inclusion rate? - What are the PV, the date of analysis and the storage history of the lot? - If the oil source or the fractionation changes, what notice and what new COA will the buyer receive? The answers should line up with the COA. A supplier who can answer the profile but not the load has described an oil, not a powder. A supplier who can answer the load but not the carrier has described a number, not a material. The product page carries the catalog specification; the COA page explains how the profile and the load are reported; the grade page compares the oil loads. The C8 vs C10 page covers the ratio, and the specification glossary entry defines the document. ### 02.1 C8 vs C10: what the MCT profile changes URL: https://nutrition.rainwoodbio.com/products/fatty-acids/mct-powder/grades/c8-vs-c10/ Reviewed: 2026-11-19 C8 and C10 are the two fatty acids that make up commercial MCT oil, and the ratio between them is a specification choice, not a quality grade. C8 (caprylic acid) has eight carbons; C10 (capric acid) has ten. The catalog profile is C8 55.0–65.0% and C10 35.0–45.0% of the oil by GC, which puts the C8:C10 ratio between about 1.2:1 and 1.9:1. That window, and the oil load behind it, is what a buyer should compare. In one lineC8 and C10 differ by two carbons; the ratio changes the oil's physical behaviour and the label arithmetic, not the legal status of the ingredient. ## Two fatty acids, two carbons apart Both are saturated medium-chain fatty acids. The two-carbon difference changes the molecular weight, the melting point and the way the triglyceride behaves in an emulsion. The table gives the free fatty acid values; in the oil, the acids are esterified to glycerol, so the oil's melting and flow behaviour is not the same as the pure acid. C8 and C10 · the two fatty acids in the MCT profile | Property | C8 · caprylic acid | C10 · capric acid | Chain length | 8 carbons | 10 carbons | Formula | C8H16O2 | C10H20O2 | Molecular weight | 144.21 g/mol | 172.26 g/mol | Melting point | About 16.7 °C | About 31.6 °C | Behaviour in the oil | Lower viscosity, lower melting | Higher viscosity, more body The oil is a mixture of triglycerides, not a blend of free acids. The mixed triglycerides keep the oil liquid at room temperature, while the pure C10 acid is solid at that temperature. That is why the ratio and the triglyceride structure both matter, and why the GC profile is reported as fatty acids rather than as a single melting point. ## What the ratio means in the oil The catalog range is a window, not a single ratio. At C8 55% and C10 45%, the ratio is 1.22:1; at C8 65% and C10 35%, it is 1.86:1. The midpoint is 60:40, which is the ratio many buyers write into a specification when they want a consistent sensory and physical profile. The two lines are separate limits, so a lot can sit at either edge and still pass. A buyer who needs a tighter window should write the ratio itself as a line. Source and fractionation both move the result. Coconut and palm kernel oils are the usual raw materials; the fractionation cut, not the botanical source alone, sets the final ratio. A change of source or cut can move the ratio without moving the oil load, which is why the COA should report C8 and C10 separately rather than a single “MCT” figure. The ratio is not a purity measure. Both a 55:45 and a 65:35 oil can meet the same MCT specification; the difference is which fatty acids the fractionation collected. The balance is other fatty acids, and the full GC profile is the way to see them. ## What the ratio means in the powder The oil load converts the ratio into a powder-basis figure. At 50% oil, the powder carries 27.5–32.5% C8 and 17.5–22.5% C10. At 70% oil, the same profile gives 38.5–45.5% C8 and 24.5–31.5% C10. A label that declares C8 or C10 per gram needs the powder-basis figure; the oil figure overstates what the serving contains. C8 and C10 in the powder · 50% and 70% oil load at the catalog profile | Fatty acid | 50% oil powder | 70% oil powder | C8 | 27.5–32.5% | 38.5–45.5% | C10 | 17.5–22.5% | 24.5–31.5% | Oil per gram | 0.50 g | 0.70 g The calculation is simple but easy to skip. Two powders can declare the same 60:40 ratio and deliver different milligrams per gram because their oil loads differ. The ratio describes the oil; the load describes the powder. A specification needs both lines, and a label needs the product of the two. ## The format follows the oil A C8-rich oil is less viscous and has a lower melting range; a C10-rich oil is more viscous and carries more body. In the powder, that shows up in the emulsion, the surface oil, the flow and the way the powder disperses. A C8-rich oil can be easier to emulsify at a given solids level; a C10-rich oil may need more shear or a different carrier balance to reach the same droplet size. Those differences are physical, not a ranking. A C8-rich powder can feel lighter in a drink; a C10-rich powder can give a fuller mouthfeel. Agglomeration can fix flow, but it does not change the ratio. The 40 mesh target is a particle-size line, not an oil-profile line, and a powder can pass the sieve with either ratio. ## What goes on the label The label describes the oil, not the ratio as a nutrient. In the EU, the nutrition declaration carries fat and saturates; in the US, total fat and saturated fat. C8 and C10 are saturated fatty acids, so they sit inside those lines. Neither market requires a separate C8 or C10 nutrition declaration. The ratio can appear in the ingredient description, for example “MCT oil (C8/C10),” or in a specification, if the statement is truthful and not a health claim. Keep the oil load and the ratio separate on the label. A front-of-pack “60% C8” statement is a composition statement; it should be supported by the lot data and should not imply an outcome. The ingredient name should match the source and the form, and the carrier should be declared as the carrier. ## The regulatory status does not change Both C8 and C10 are saturated fatty acids, and MCT oil is the ingredient; there is no separate additive approval for a 60:40 oil versus a 55:45 oil. The source oil still drives the allergen file, and the carrier still needs its own status. A ratio statement is a specification or a compositional claim, not a permitted health claim. That is why the ratio belongs in the technical file and the purchase specification, not in the claims column. It can be checked by GC, it can be declared on the COA, and it can be compared between suppliers. It cannot carry a physiological promise on its own. ## When to choose which Choose on the physical and label consequences. A C8-rich profile gives a less viscous oil, which can suit a capsule, a dispersion or a low-dose stick. A C10-rich profile gives more body and a higher melting range, which can help a powder that needs structure or a fuller mouthfeel. Neither is better in general. When the specification already fixes 55–65% C8 and 35–45% C10, the buyer does not need to choose a single ratio; the supplier delivers inside the window. Choose a tighter ratio only when the application or the label needs it. The product page carries the catalog specification, the grade page compares the oil loads and the identity page explains how the profile is proven. The COA page shows where the ratio sits on the certificate. ### 01 What the COA for bromelain actually contains URL: https://nutrition.rainwoodbio.com/products/enzymes/bromelain/coa/ Reviewed: 2026-11-19 For a bromelain lot the certificate reports appearance, activity in GDU/g with the assay method, pH of a 1% solution, loss on drying, particle size, the heavy-metal panel and microbiology. Activity is the number that decides whether the powder is the grade ordered, and it is also the number most easily quoted without the conditions that produced it. The ranges are the catalog specification; the batch COA confirms a particular drum. In one lineThe GDU figure is an assay result on a named substrate, not a concentration, so the unit, the gelatin method and the conditions belong beside it. ## The certificate as a set of rows Read the sheet as rows, each carrying a test, a method and a limit. Activity is the first row a buyer checks, but moisture, pH and the heavy-metal panel can each fail while activity looks correct. A certificate that reports a number without a method cannot be reproduced by a second laboratory. Activity, identity and physical limits · bromelain | Parameter | Method | Release limit | Appearance | Visual | Off-white to light tan powder | Bromelain activity | Gelatin digestion, GDU method | ≥2,400 GDU/g | pH (1% solution) | Potentiometry | 5.0–7.0 | Loss on drying | Gravimetric | ≤5.0% | Particle size | Sieve analysis | ≥95% through 40 mesh Heavy metals and microbiology · bromelain | Parameter | Method | Release limit | Lead (Pb) | ICP-MS | ≤3 mg/kg | Arsenic (As) | ICP-MS | ≤2 mg/kg | Cadmium (Cd) | ICP-MS | ≤1 mg/kg | Mercury (Hg) | ICP-MS | ≤0.1 mg/kg | Total aerobic count | Plate count | ≤10,000 cfu/g | Yeast and mould | Plate count | ≤100 cfu/g | E. coli | Absence test | Absent | Salmonella | Absence test | Absent ## What the GDU figure measures GDU stands for gelatin digesting unit. One GDU is the amount of enzyme that liberates 1 mg of amino nitrogen from gelatin in 20 minutes at 45 °C and pH 4.5. The result is a rate on a named substrate, so a declared activity of ≥2,400 GDU/g means that every gram of powder, as sold, carries at least that activity under those conditions. It is not a purity percentage and it does not translate directly into protein content. Activity is reported per gram as-is, which is why the moisture row sits beside it. A lot at the 5.0% loss-on-drying limit carries more water per gram than a lot at 2.0%; if the dry solids hold the same activity, the as-is GDU/g of the wetter lot is lower. The two numbers have to be read together, and the activity basis — as-is or dried — should be stated on the certificate. The pH row is measured on a 1% solution and sits at 5.0–7.0. That is not the pH of the activity assay, which is 4.5. A powder can sit inside the solution-pH range and still be assayed at a pH the solution does not hold. The mesh row is a sieving result: ≥95% through 40 mesh describes fineness, not activity, and a change of mesh needs a new sieve result rather than a new activity figure. ## Release limit versus batch result A limit is the gate; a result is what the laboratory measured. They belong in separate columns, with the method beside them and the lot number above them. A result column that repeats the limit is not a result; it says what the lot was allowed to be, not what it was. The activity limit is one-sided. A lot at 3,000 GDU/g is not out of specification because it is far above the floor; it is a stronger lot of the same grade, and the buyer should decide whether the higher activity suits the formula. A lot at 2,390 GDU/g fails the floor even if every other row passes. Rounding matters: a result given to the nearest 50 GDU/g against a limit of 2,400 leaves an ambiguous band, so fix the reporting resolution and the acceptance rule. Not every row is a measurement. Appearance is an observation and “conforms” is a judgement. The heavy-metal and micro rows do carry numbers and should be reported against the same limits as the specification. When a result sits at the limit, ask for replicates; one value at the boundary is less informative than three around it. ## What moves between batches Bromelain is extracted from pineapple stem, so the raw material is agricultural before it is enzymatic. Cultivar, harvest, stem handling and the time between cutting and extraction all reach the final powder. The purification train — clarification, precipitation, drying and milling — then sets how much activity survives into the drum. Dilution is the largest single lever on the activity figure. A 1,200 GDU/g grade is normally the same preparation blended with a food-grade carrier to a lower activity per gram, not a different enzyme. If the certificate does not name the carrier or the dilution step, two quotations for the same grade may not describe the same powder. Colour is a weak signal. A darker tan can follow a hotter drying step or a longer hold, and both can lower activity. pH drifts with neutralisation and drying; loss on drying moves with the drier and the pack. None replaces the activity assay, but a trend across lots is worth a question. ## When to order an outside test An independent test is worth ordering for a new source, the first shipment into a regulated market, a disputed result, or an activity figure that does not match the trial. The panel should repeat the activity assay with the same substrate and conditions, add protein content and a protein band pattern, and run ICP-MS plus microbiology on the same submitted sample. Ask the laboratory to state the substrate, the standard, the incubation time and the replicate results, not only the final number. The GDU assay has several published versions and several in-house modifications; two laboratories can report different figures for the same powder because their gelatin, pH or endpoint differs. A “not detected” line without a detection limit is a statement about the method, not the sample. Chain of custody matters: the sample tested should be the sample retained, with the lot code on the bag, the certificate and the submission form. If a result is contested, the referee should receive the supplier's certificate and the specification before it starts, so the disagreement is about the measurement rather than the paperwork. ## What to compare between suppliers Supplier comparison · seven lines that must match | Line | What to ask for | Source | Pineapple stem, botanical name and country of origin | Activity | GDU/g, with the result and not only the limit | Method | Substrate, pH, temperature, time and standard | Basis | As-is or dried, with the loss-on-drying result | Physical | pH of a 1% solution and the mesh result | Contaminants | Heavy-metal and microbiological results against limits | Carrier | Diluent, granulation aid or other enzyme activity declared Two quotations that agree on GDU/g but disagree on the method, the basis or the carrier are not the same material. The catalog specification for this grade sits on the bromelain product page; the activity choice is set out on the grade page; the tests behind the identity claim are on the identity page; the heavy-metal method is described in the ICP-MS note; the terms on the certificate are defined in the COA glossary entry. ### 02 1,200 or 2,400 GDU/g: choosing a bromelain grade URL: https://nutrition.rainwoodbio.com/products/enzymes/bromelain/grades/ Reviewed: 2026-11-19 A 2,400 GDU/g grade and a 1,200 GDU/g grade can be the same pineapple enzyme at two concentrations, because the lower grade is normally the higher preparation diluted with a food-grade carrier. The choice is not about which number is better; it is about how much activity a serving needs and how much powder the dosage form can carry. The label, the capsule size and the assay target all follow from that decision. In one lineThe grade is chosen by the activity a serving needs, not by the number on the first quotation; switching grades changes the powder mass, the carrier load and the label. ## Activity is a concentration, not a strength rating GDU/g is activity per gram of powder. One kilogram of the 2,400 grade carries 2.4 million GDU; one kilogram of the 1,200 grade carries 1.2 million. To deliver a fixed number of GDU, the lower grade needs twice the powder mass. That is the whole arithmetic, and it applies whether the grade difference comes from dilution, from a different extraction cut or from a different drying yield. The catalog grade here is ≥2,400 GDU/g, with lower-activity dilution available on request. A diluted grade is a legitimate product when the certificate names the carrier and the activity is measured on the blend, not calculated from the concentrate. A blend that is merely assumed to be 1,200 GDU/g because it was mixed one-to-one is not a specification; it is an estimate. ## The two grades side by side 1,200 and 2,400 GDU/g · activity and mass | Property | 1,200 GDU/g | 2,400 GDU/g | Activity per kilogram | 1.2 million GDU | 2.4 million GDU | Powder for 3,000 GDU | 2.5 g | 1.25 g | Powder for 12,000 GDU | 10 g | 5 g | Carrier load at equal activity | Higher | Lower | Typical fit | Sticks, blends, tablets | Capsules, low-mass sticks The table is arithmetic, not a batch result. A 500 mg capsule filled with the 2,400 grade carries at most 1,200 GDU; the same capsule filled with the 1,200 grade carries at most 600 GDU. Neither capsule can reach 3,000 GDU without a larger fill or a stronger grade, which is why capsule formats usually begin with the higher activity and stick packs can use either. ## Mesh, flow and dust The catalog grade is sold at ≥95% through 40 mesh, and a diluted grade should carry the same sieve specification. Both are fine powders with the flow and dusting that come with that mesh. The difference is how much powder carries a given activity: a formula built on the 1,200 grade handles twice the mass for the same GDU, so the blender, the filler and the pack see more material. That can be an advantage in a stick pack, where mass helps the sachet feel substantial, and a problem in a capsule, where mass is capped by the shell. Granulated forms are available on request and change the flow without changing the declared activity. Do not use a grade change to fix a flow problem; a granulation or a mesh change is the direct fix, and it keeps the label arithmetic intact. A carrier introduced by dilution can also change hygroscopicity and caking, so the pack and the storage statement should be checked after the switch. ## What each dosage form can carry A two-piece capsule holds roughly 300–800 mg of powder depending on size and fill. At 2,400 GDU/g that is 720–1,920 GDU per capsule; at 1,200 GDU/g it is 360–960 GDU. A 5 g stick pack at 2,400 GDU/g can carry up to 12,000 GDU, and the same stick at 1,200 GDU/g carries up to 6,000 GDU. Tablets add a compression step: the activity in the tablet is what survives the press, not what was in the blend. The label arithmetic is simple but easy to get wrong. Write the activity per gram and the mass per serving, then multiply. “Bromelain 2,400 GDU/g, 500 mg” supplies 1,200 GDU per serving. “Bromelain 1,200 GDU/g, 500 mg” supplies 600 GDU. If the label declares only “Bromelain 500 mg”, the reader cannot tell which grade was used, and the two products are not interchangeable at the same mass. Uniformity is the second dosage-form question. A low-dose, high-activity grade is a small fraction of the blend, so segregation matters more; a high-mass, lower-activity grade is easier to distribute but brings more carrier into the formula. Whichever way the formula moves, the blend study has to be repeated on the new grade. ## What changes when you switch - The powder mass per serving, and therefore the capsule size or sachet fill. - The carrier load and the excipient declaration on the label. - The blend uniformity and the mixing time for the new particle mix. - The release activity target, because the grade defines the floor. - The label activity statement and the serving arithmetic. - The stability data, because more carrier can mean more moisture uptake. Write the grade into the purchase order as an activity, not only as a grade name: “Bromelain from pineapple stem, ≥2,400 GDU/g by the gelatin method, as-is basis, carrier declared.” Then the certificate and the label speak the same language. If the grade is changed later, handle it as a formula change and re-run the blend, fill and stability checks rather than reprinting the label alone. ## When a different grade is the wrong answer A flow or caking complaint belongs to the mesh, the granulation or the pack, not to the activity grade. A potency complaint belongs to the assay method and the certificate, not to a higher grade bought to compensate. A label complaint belongs to the declaration, not to a new drum. The units themselves are a separate decision: GDU and FIP measure the same kind of activity on different substrates, and the unit comparison explains why the numbers are not interchangeable. The catalog grade and its limits are on the bromelain product page. What the certificate reports for that grade is on the COA page; heat and moisture limits are on the stability page; the pack sizes and the 1 kg minimum are on the ordering page. The term itself is defined in the assay glossary entry. ### 02.1 GDU vs FIP: what a bromelain unit actually means URL: https://nutrition.rainwoodbio.com/products/enzymes/bromelain/grades/gdu-vs-fip/ Reviewed: 2026-11-19 GDU and FIP are both units of bromelain activity, and neither is a mass. The GDU is defined on gelatin, the FIP unit on casein, and the two assays use different substrates, conditions and readouts. A supplier can quote one, the customer's specification can require the other, and the number in between is an estimate unless the same laboratory measured both. In one lineGDU and FIP are both rates measured on a substrate, not masses, so a figure converts only with the method that produced it. ## A unit is a rate, not a mass Enzyme activity is a rate: how much substrate is converted per unit time under stated conditions. The unit therefore carries the substrate, the pH, the temperature and the readout inside its definition. “2,400 GDU/g” is a concentration of activity, not a weight of enzyme, and “2,400 GDU” on its own does not say per gram, per capsule or per serving. The same logic applies to the prefix. 2.4 FIP U/mg is 2,400 FIP/g; a certificate that mixes the two conventions can look a thousand times stronger or weaker than it is. Read the unit and the denominator before comparing any two numbers. ## GDU: gelatin and amino nitrogen GDU stands for gelatin digesting unit. The common definition is the amount of enzyme that liberates 1 mg of amino nitrogen from gelatin in 20 minutes at 45 °C and pH 4.5. The readout is amino nitrogen, not a coloured tyrosine equivalent, and the substrate is gelatin, a protein with a characteristic amino acid balance. The assay is widely used for bromelain because it is robust and because the 1,200 and 2,400 GDU/g grades are traded in it. It is also a method family rather than a single locked procedure. Method sheets in circulation use pH 4.5 or 5.5, different gelatin sources and different ways of stopping the reaction. That is why a certificate should name the method, and why two GDU figures from different laboratories are not necessarily the same measurement. ## FIP: casein and tyrosine FIP stands for Fédération Internationale Pharmaceutique. The FIP protease unit is defined on casein: the substrate is hydrolysed at 35 °C, the reaction is stopped with trichloroacetic acid, and the acid-soluble tyrosine is measured. One FIP unit corresponds to 1 µmol of tyrosine per minute, and 1 FIP unit equals 1 Ph. Eur. unit. The method sheet for bromelain fixes the pH, so ask for it rather than assuming the general protease conditions. The substrate, the pH, the temperature and the readout are all different from the GDU assay, so the two units describe the same kind of activity through different lenses. FIP units appear in pharmacopoeial and European product documentation, and some customers specify them for that reason. The FIP unit is not a universal currency either. It is defined per enzyme and per method, and a FIP figure on a bromelain certificate should be backed by the casein method, not by arithmetic from a GDU result. ## Why a conversion factor is not a specification Suppliers often quote a trade factor of about two FIP units per GDU, which would put 2,400 GDU/g near 4,800 FIP/g. The factor is empirical: it depends on the two methods, the substrate batches, the standard and the preparation, and it can shift between lots and laboratories. Used as a rough cross-check it is useful; used to write a specification it is a guess dressed as a number. The safer route is to measure both on the same lot, or to buy against the unit the customer's specification names and ask for the method behind it. If a certificate shows a FIP figure that was calculated from GDU/g, the certificate should say so. A calculated figure presented as a measured one is a common unit error in this ingredient. ## What the label and the file must say No market prescribes GDU or FIP as the only permitted unit, but the label must not mislead. State the unit and the denominator — “2,400 GDU/g” or “240 GDU per capsule” — and keep the arithmetic consistent with the mass declared. A label that says “Bromelain 2,400 GDU” without a denominator is ambiguous, and a label that declares 500 mg of a 2,400 GDU/g powder is declaring 1,200 GDU, not 2,400. In the US the Supplement Facts panel declares the amount per serving, and the unit should be the one the certificate states. In the EU and the UK the ingredient list and the quantitative declaration follow the general food information rules, and any activity statement must be truthful and substantiated. The compliance file should carry the certificate that matches the label unit, not a converted figure. ## Choosing a unit for a purchase Choose the unit the finished-product specification or the customer's reference product uses, and make the certificate match it. If the specification is written in GDU, buy GDU and do not accept a FIP figure converted at the supplier's factor. If it is written in FIP, ask for the casein method and a measured result. If both are needed, assay both on the same lot and keep the raw data. The unit is also a contract term. Write it into the purchase order with the method and the basis, and agree which laboratory is the referee before the first shipment. The grades page covers the activity levels; the COA page shows where the unit sits on the certificate; the identity page covers the protein evidence behind the number. The product page carries the catalog grade, and the compliance page covers the label rules. ### 03 Bromelain activity falls with heat and moisture; the process decides the shelf life URL: https://nutrition.rainwoodbio.com/products/enzymes/bromelain/stability/ Reviewed: 2026-11-19 Bromelain is a protein, and the activity declared on the certificate is the property most sensitive to how the powder is dried, blended, granulated, tableted and packed. A dry powder in a sealed foil pack holds its activity far longer than the same powder wetted, heated or left open. The process step that adds heat or water is the step that decides the shelf life. In one lineDry, cool and sealed keeps bromelain; heat, water and an extreme pH take activity away, and the process step that adds them sets the shelf life. ## The dry powder is the stable state The catalog limits are ≤5.0% loss on drying and a pH of 5.0–7.0 in 1% solution. Together they describe a powder dry enough and neutral enough for ambient handling. Water is the variable that matters most: at low moisture the protein is glassy and the unfolding that destroys activity is slow; as water content rises, the protein gains mobility and the rate of loss rises. The pack is part of that control. A 1 kg foil pouch or a lined 25 kg drum keeps the powder dry only while the seam and the liner are intact. Storage at ambient temperature in a closed pack is the normal condition. Refrigeration is not a substitute for a dry pack: a cold pouch opened in a warm room condenses water on the powder, doing more damage than the warmth avoided. For a long hold, a stable cool temperature in the sealed pack is better, and the stability data should match the label condition. Moisture also feeds microorganisms. The micro specification — APC ≤10,000 cfu/g, yeast and mould ≤100 cfu/g, E. coli and Salmonella absent — is a release gate, not a licence to store the powder damp. A lot that passes at release can fail after a humid week in an open drum. ## Once water is added, the clock runs faster In solution the protein is fully hydrated, and activity declines during storage even at room temperature. The pH matters: the catalog 1% solution sits at 5.0–7.0, and moving outside that window, or holding it warm, increases the loss. A drink mix is usually a dry powder, so test the mix, not the drink; a ready-to-drink application needs its own data and hold time. If a process uses a liquid intermediate — a coating suspension, a granulation fluid or a slurry — the time and temperature of that step belong in the process record. A short, cold contact is not the same as an overnight hold, and the activity after the step is what the tablet or the granule actually carries. ## What drives the loss Bromelain activity · factors and controls | Factor | Effect | Control | Heat | Faster unfolding and loss | Keep process temperature low and time short | Water | Mobility, caking, microbial growth | Dry to ≤5.0% LOD, foil pack, desiccant | pH | Activity outside the stable window | Check the matrix pH, not only the powder | Shear and foam | Surface denaturation | Low-shear mixing, anti-foam control | Metal ions and oxidants | Loss of activity | Source control, ingredient compatibility | Light | Slow contribution | Opaque pack or carton | Time | Background loss | Real-time data, end-of-shelf-life limit The table is qualitative on purpose. The size of each effect depends on the matrix, the moisture and the temperature, and only a measurement on the formula shows its size. A supplier's powder stability says what the drum does; it does not predict what a tablet with an acidic excipient does. ## A stability protocol that answers the question Run real-time storage at the condition on the label, with an accelerated arm beside it. A common design is 25 °C and 60% relative humidity for real time, and 40 °C and 75% relative humidity for the accelerated arm, with assay points at 0, 1, 3, 6, 12 and 24 months. The assay is GDU/g with the same method as the release certificate, plus loss on drying, appearance and micro at the start and end. Test the material the customer buys. If the product is a tablet, the stability sample is the tablet; if it is a stick pack, it is the sealed stick. A powder study cannot stand in for a tablet: the press adds heat and shear, and the excipients bring their own pH and water. Include a control at 4 °C to separate true instability from assay drift, and keep the raw data, not only the conclusion. Accelerated data is a screening tool for an enzyme, not a shelf-life claim. A lot that loses activity at 40 °C may still be acceptable at 25 °C, and a lot that passes the accelerated arm can fail in real time. The shelf life should rest on real-time data for the pack and matrix, with the accelerated arm used to flag a formula before the long study finishes. ## Granulation, tableting and the pack Wet granulation combines the two factors that remove the most activity: water and heat. A water granulation with a hot drying step can remove a large share of the activity before the tablet exists, and the loss is invisible in the powder certificate. Dry granulation by roller compaction avoids the water but adds pressure and heat; direct compression avoids both the water and the drying step but still exposes the powder to punch heat and shear. Coating is a separate risk. Aqueous film coating wets the tablet and dries it with hot air; an organic coating avoids water but brings solvent handling. Effervescent systems are the least friendly matrix, because the tablet is designed to dissolve in water and the powder bed is sensitive to humidity. Stick packs and sachets are the friendlier format, provided the foil and the seal keep water out. The pack is part of the formula. A foil laminate with a sealed seam, a desiccant where the matrix needs one, and a nitrogen flush for a sensitive blend all change the shelf life. A fiber drum needs a food-grade liner that is intact at the rim; without it the drum is a shipping container, not a moisture barrier. A pack change is a stability change and needs its own data. ## Assigning the shelf life The label activity is an end-of-shelf-life figure. If the label declares 2,400 GDU/g and the real-time study shows 85% retention at the target shelf life, the release target has to sit near 2,820 GDU/g for the label to remain true at the end. That is arithmetic, not a batch result, and the retention figure has to come from the study on that matrix and pack. Where the retention is not known, the shelf life should be short and justified, not long and assumed. The storage statement on the pack — cool, dry, sealed — is part of the claim, and a label that promises a shelf life the pack cannot deliver is a specification error, not a marketing one. The COA page shows the activity and moisture rows the study follows; the grade page explains why a diluted grade carries more carrier into the matrix; the ordering page covers the packs. The product page lists the catalog limits, and the loss-on-drying note defines the moisture term. ### 04 Bromelain: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/enzymes/bromelain/moq/ Reviewed: 2026-11-19 The minimum order for bromelain is 1 kg, packed in a foil pouch, and the standard bulk pack is a 25 kg fiber drum. The 1 kg unit is a trial quantity drawn from a released lot, not a retail pack. Lead time for a released lot is typically 1–7 days, and a quotation needs six details from the buyer. In one lineOne kilogram is the trial unit: enough activity to qualify a released lot, small enough that the first order does not become stock. ## Why the minimum is one kilogram At 2,400 GDU/g, one kilogram carries 2.4 million GDU. At a 3,000 GDU serving that is 800 servings, which covers a bench batch, a short encapsulation run and a retain sample. The quantity is set by activity, not by mass: a kilogram of the 1,200 grade carries half the activity, so a trial that needs 1.5 million GDU needs 625 g of the 2,400 grade but 1.25 kg of the 1,200 grade — and the 1 kg unit no longer covers the trial. The pouch is drawn from a released lot, not from a separate sample production. The lot code on the pouch should match the certificate and the drum the customer will order next, so the trial and the production run describe the same material. A sample from a different lot proves the material can work, not that the lot on order will. One kilogram is a sale unit with the same specification, certificate and traceability as the drum. A buyer who needs less for a feasibility test can ask whether a smaller draw can be taken from the reserved lot; that is a commercial question, not a change to the minimum. ## The two standard packs Bromelain · standard packing | Pack | Net content | Typical use | Foil pouch | 1 kg | Trial, qualification, small batch | Fiber drum | 25 kg | Production, blending, repacking The pouch is the moisture barrier. Bromelain is hygroscopic enough that the foil laminate, the seam and the reclose feature do more for the shelf life than the outer carton. The drum needs a food-grade inner liner and a lid that seals; a fiber drum without a liner is a shipping container, not a moisture barrier. Ask three questions before the pack is fixed: is the pouch foil-laminated or a metallised film with a lower barrier; is the drum liner food-grade and intact at the rim; is a desiccant used, and where is it placed. The answers belong in the specification, because a pack change is a stability change. Labels should carry the product name, the source and activity, the lot code, the net content, the storage condition and the manufacturer. ## Lead time A released lot is typically quoted at 1–7 days. The range covers the difference between a pack already in stock and one that has to be filled, labelled and documented for a specific order. A change of mesh, a granulated form, a private-label artwork or a destination that needs legalisation can add time; those are production steps, not dispatch delays. The clock should start when the purchase order, the specification and the shipping details are agreed, not when the first email is sent. A date promised before the activity grade and the pack are fixed is a guess. Ask whether the lot is already released or still in production, and what the lead time is measured from. ## What a quotation needs Six details change the answer: - Product and source: bromelain from pineapple stem, CAS 9001-00-7. - Activity: 2,400 GDU/g or a lower dilution, with the method and the as-is basis. - Quantity and pack: 1 kg pouch, 25 kg drum, or a combination. - Destination and Incoterm: the delivery point and who arranges freight and insurance. - Documents: COA, TDS, SDS, allergen and origin statements, and any customer declaration. - Label and date: standard or private label, artwork status, and the date the material is needed. A quotation that answers only the quantity and the destination is incomplete. The activity grade decides the mass, the documents decide the destination, and the label decides the production step. Send all six in one message and the quote can be firm rather than indicative. ## Samples and the trial A sample should come from the reserved lot with its certificate attached. A pouch without a COA is a powder with a label; the trial cannot be signed off against a specification that is not attached. Ask for enough material to run the activity assay in duplicate, a bench batch and a retain, and keep the retained portion sealed. If the trial will run weeks after delivery, check the storage condition and keep the pouch closed until the day it is opened. Activity is the property being tested, so a sample left open in a warm room is not a fair test of the lot. ## Terms worth settling before the first order The purchase order should reference the specification, the activity and its method, the source, the pack and the certificate. The supplier should confirm that the COA travels with the lot, that the lot code matches the pack, and that a retained sample is kept for the agreed period. Payment terms, Incoterms, insurance and destination documents belong in the quotation, not in a later email. Agree what happens if a result falls outside the specification: who tests, which laboratory is the referee, and whether the lot is replaced or credited. Agree the allergen statement for the pineapple source and the SDS for dust control, because both are part of the file the customer's safety team will ask for. That clause is easier to write before the first shipment than after a disputed drum. The COA page lists the tests the certificate should carry; the stability page explains why the pack is part of the specification; the compliance page lists the documents a destination may ask for. The product page has the catalog specification, and the MOQ note defines the term. ### 05 Where bromelain is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/enzymes/bromelain/compliance/ Reviewed: 2026-11-19 Bromelain from pineapple stem is used as a food enzyme and as a supplement ingredient, and the permission behind it is not one status across the three markets. The EU regulates food enzymes through Regulation (EC) No 1332/2008 and leaves supplement use to general food law and national rules; the US recognises the preparation as a GRAS direct food ingredient and, separately, as a dietary ingredient; the UK applies retained food-enzyme and supplement law. The file has to show the route and the evidence behind it. In one lineBromelain is permitted through different routes in the EU, the US and the UK, and the file has to show the route, the source and the activity, not only the CAS number. ## Four checks, not one First, may the preparation be used in the intended market and application at all? Second, is the specification — source, activity, carrier, purity — the one covered by that permission? Third, do the contaminant results sit under the ceiling that applies to the food or supplement? Fourth, what may the label and the claim say? Answering only the first leaves the other three open. “Bromelain” covers a family of protease preparations from Ananas comosus, and stem and fruit preparations are not identical. The file should name the plant part, the activity unit and the assay method, because a permission or a specification written for a generic protease does not automatically cover a 2,400 GDU/g stem powder. ## European Union Regulation (EC) No 1332/2008 is the framework for food enzymes. It requires a food enzyme to be covered by the Union list before it is placed on the market as such or used in food, and provides for EFSA's safety assessment and specifications. As of this review the Union list has not been adopted, so enzymes continue to be marketed under transitional national provisions while the list is completed; check the current text before relying on a national position. An enzyme sold as a food supplement is a harder classification. Directive 2002/46/EC harmonises the vitamin and mineral forms in supplements, not enzymes, so a bromelain supplement sits under general food law — Regulation (EC) No 178/2002 — and the supplement rules of the Member State of sale. Member States may classify the enzyme differently, as a food enzyme with a technological function or as a food ingredient; the file should state the intended use and the national basis. Labelling follows Regulation (EU) No 1169/2011: the ingredient list names the preparation, the source is declared, and the activity is stated in a way the buyer can understand. Regulation (EU) No 1924/2006 governs claims. Regulation (EU) 2015/2283 applies if the destination asks for novel-food status; the dossier is the operator's to make. ## United States 21 CFR 184.1024 affirms bromelain as GRAS for direct addition to food, identifies it as an enzyme preparation from Ananas comosus and A. bracteatus with the characteristic activity of a peptide hydrolase (EC 3.4.22.32), and requires it to meet the Food Chemicals Codex general and additional requirements for enzyme preparations. The regulation places no limit other than current good manufacturing practice. As a dietary supplement ingredient, bromelain falls under DSHEA. The supplier should state the basis: a history of use before 15 October 1994, or a new dietary ingredient notification. The finished product is made under the dietary supplement cGMPs in 21 CFR 111, and the Supplement Facts panel follows 21 CFR 101.36. Structure/function claims need the DSHEA disclaimer and a substantiation file; disease claims are not permitted. No federal maximum applies to lead, cadmium or mercury in dietary supplements. California Proposition 65 sets warning thresholds, and USP <2232> is a reference some buyers require. The catalog limits below are commercial release gates, not a federal ceiling. ## United Kingdom Great Britain retains Regulation (EC) No 1332/2008 as amended by the Food Additives, Flavourings, Enzymes and Extraction Solvents (Amendment etc.) (EU Exit) Regulations 2019, and food-enzyme authorisations are handled through the FSA's regulated-products framework. The Food Supplements (England) Regulations 2003 and their Scotland and Wales equivalents apply to the supplement, with retained labelling, claims and contaminant instruments. Northern Ireland follows the EU regime under the Windsor Framework, so one UK label may not work in all four nations. ## Contaminant limits Heavy metals · catalog release limits and regulatory ceilings | Metal | Catalog limit | EU and GB supplements | US federal | Lead (Pb) | ≤3 mg/kg | 3.0 mg/kg | No maximum | Arsenic (As) | ≤2 mg/kg | No harmonised EU/GB limit | No maximum | Cadmium (Cd) | ≤1 mg/kg | 1.0 mg/kg | No maximum | Mercury (Hg) | ≤0.1 mg/kg | 0.10 mg/kg | No maximum The EU figures are the food-supplement maxima in Regulation (EU) 2023/915; GB applies the retained predecessor, Regulation (EC) No 1881/2006. Arsenic has no harmonised ceiling, so the catalog sets 2 mg/kg. The comparison only works on the same basis: a result per kilogram of powder and a limit per daily dose differ, and a multi-ingredient product dilutes the raw material's contribution. ## Label and claim boundaries Bromelain is a protease, and its activity is a quality parameter, not a health claim. The label may describe the ingredient, the source and the activity; it may not imply a disease benefit, and a structure/function statement needs the evidence and, in the US, the DSHEA disclaimer. In the EU and the UK only authorised health claims may be used, and a claim written for another ingredient does not transfer to this one. Pineapple is not one of the 14 allergens in Annex II to Regulation (EU) No 1169/2011, nor a major US allergen, but the source is still declared and the SDS covers dust. Statements about absent enzymes or carriers belong in the specification, not in a claim. ## The file a brand should hold - Specification naming the source, the activity and its method, the carrier and the limits. - Batch COA with the GDU/g result, method, as-is basis, pH, loss on drying, mesh, metals and micro. - Technical data sheet and safety data sheet, with the source and activity on both. - Food-enzyme or dietary-ingredient basis statement for the destination market. - Source, origin, allergen and GMO statements for the pineapple material. - Contaminant results against the destination's limits, with methods and detection limits. - Stability summary for the pack and the matrix, and the storage statement. - Approved artwork checked against the certificate and the claim file. ## A checklist before the first shipment - Does the specification name pineapple stem, the activity and the assay method? - Is the activity reported on an as-is basis with the loss-on-drying result beside it? - Do the metal results meet the destination's limits on the same basis? - Is the food-enzyme or dietary-ingredient route documented for the market? - Does the label name the source and the activity, not only the mass? - Is every claim on the artwork authorised, or absent? - Do the lot codes match on COA, pack and packing list? - Are the allergen, origin and SDS documents signed and in date? The market frameworks are summarised on the EU, US and UK regulatory pages. The COA page breaks the certificate down; the identity page covers the source and activity evidence; the stability page covers the pack. The product page carries the catalog specification, and the quality page describes the release workflow. ### 06 How we prove a bromelain lot has the declared activity URL: https://nutrition.rainwoodbio.com/products/enzymes/bromelain/identity/ Reviewed: 2026-11-19 A bromelain lot is identified by four layers that have to agree: the pineapple source, the protein, the gelatin activity and the lot record. The activity figure alone is the weakest of the four, because a powder can carry the declared GDU/g and still be a different preparation. The specification and the certificate should make each layer checkable. In one lineA bromelain lot is identified when the pineapple source, the protein, the gelatin activity and the lot record agree; no single number carries the claim. ## Four layers, one claim Layer one is the source: Ananas comosus, stem, country of origin, supplier and extraction route. Layer two is the protein: total protein and the band pattern on a gel. Layer three is the activity: GDU/g by the gelatin method, on an as-is basis, with the method's conditions. Layer four is the record: the lot code, the certificate, the retained sample and the audit trail that connects them. Identity layers · question and evidence | Layer | Question | Evidence | Source | Is it pineapple stem? | Supplier declaration, origin, plant part | Protein | Is the protein bromelain? | Protein content, gel band pattern | Activity | Does it work on gelatin? | GDU/g with substrate and conditions | Record | Is this the lot tested? | Lot code, COA, retained sample No single layer carries the claim. A source declaration without activity is a statement about a plant; an activity figure without a source is a number about a powder; a certificate without a lot code is a document about no particular drum. ## The activity assay One GDU is the amount of enzyme that liberates 1 mg of amino nitrogen from gelatin in 20 minutes at 45 °C and pH 4.5. The assay is a rate measurement, so the substrate, the pH, the temperature, the time and the standard all belong in the method. The result is reported per gram as-is, and the loss-on-drying result belongs beside it: a wetter powder carries fewer GDU per gram even when the dry solids are unchanged. The GDU assay is not one locked international method. Published versions and in-house modifications differ in the gelatin, the pH (4.5 in the common definition, 5.5 in some method sheets), the endpoint and the standard. Two laboratories can return different figures for the same powder, so a specification that names only “GDU/g” leaves the method open. The certificate should name the method, and the buyer should ask whether it is the same method as the reference product. Activity is also not identity. A fungal protease or a papain preparation can liberate amino nitrogen from gelatin and return a GDU figure. The assay says the powder hydrolyses the substrate; it does not say which protein did it. ## Activity against protein Protein content is measured by Kjeldahl nitrogen, by Bradford or by biuret, and each method has its own bias. The useful figure is the ratio: GDU per milligram of protein, or specific activity. For a fixed grade that ratio should be stable across lots. A falling ratio at a constant GDU/g means more protein is present for the same activity, which points to dilution with a protein carrier, a different extraction cut or an inactivated fraction. The ratio also separates dilution from inactivation. Diluting an active powder with a carrier lowers GDU/g and protein roughly together, so specific activity holds. Heating a powder lowers GDU/g while protein stays, so specific activity falls. Neither movement is visible on an activity certificate that reports only the GDU/g result, which is why the protein figure belongs in the file. Do not turn the ratio into a purity claim. Bromelain preparations contain several protein components, and the specific activity depends on the assay and the protein method. Use it as a trend within one supplier and one method, not as a universal threshold. ## XRD, and why it cannot identify bromelain Bromelain is an amorphous protein preparation, so its powder diffractogram is a broad halo rather than a pattern of sharp peaks. XRD cannot tell a pineapple stem extract from another protease, confirm the Ananas comosus source or see the GDU activity. Peaks that do appear usually come from a crystalline carrier or an inorganic contaminant. A protein structure solved by X-ray crystallography requires a purified single crystal, not a standardised food powder. Identity evidence sits in the gelatin assay with its conditions, the protein content, and the SDS-PAGE band pattern compared with a reference lot; a chromatographic profile can be added where the supplier changes the extraction route. ## The routes that pass a weak test Adulteration routes · what the COA shows and what detects it | Route | What passes | What detects it | Dilution with carrier | Declared GDU/g if the blend is assayed | Carrier declaration, mass balance, specific activity | Other protease | GDU/g on gelatin | Protein band pattern, source-specific test | Inactivated powder | Protein content | GDU/g and specific activity | Fruit instead of stem | Protease activity | Source declaration, band pattern, supplier audit | Overstated activity | A certificate figure | Independent assay with the named method The table is not a list of accusations; it is a list of checks. Most lots are what the certificate says. The point is that a buyer who checks only the GDU/g has one layer of four, and the other three are easy to request. ## How to write the specification - “Bromelain, enzyme preparation from Ananas comosus stem, CAS 9001-00-7.” - “Activity ≥2,400 GDU/g by the gelatin digestion method, as-is basis, method and conditions stated on the COA.” - “Protein content and specific activity reported; band pattern on request.” - “pH 5.0–7.0 in 1% solution; loss on drying ≤5.0%; ≥95% through 40 mesh.” - “Heavy metals Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg; APC ≤10,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent.” - “Carrier and any other enzyme activity declared; no undeclared diluent.” The phrase “no undeclared diluent” is doing real work. A lower-activity grade is a legitimate dilution, but the carrier belongs in the specification and on the certificate, not only in a covering email. ## Five questions for a supplier - Which GDU method did you use, and what are the substrate, pH, temperature, time and standard? - Is the result on an as-is or dried basis, and what was the loss on drying for that lot? - What are the protein content and the specific activity, and what method produced them? - Which plant part and origin supplied the lot, and is the material 100% Ananas comosus? - What carrier or other enzyme activity is present, and where is it declared? If the answer to the first question is “the standard method”, ask for the method sheet. If the answer to the fifth is “none”, ask for the mass balance. The COA page shows where each answer sits on the certificate; the grades page covers the dilution arithmetic; the GDU versus FIP page covers the unit question. The product page carries the catalog limits, and the quality page describes the release workflow. ### 01 What the COA for cellulase actually contains URL: https://nutrition.rainwoodbio.com/products/enzymes/cellulase/coa/ Reviewed: 2026-11-19 The certificate for a cellulase lot reports appearance, activity in CU/g, the pH of a 1% solution, loss on drying, particle size, the heavy-metal panel and microbiology. The activity row is the only line that describes the enzyme, and it means little unless the certificate sets the unit definition, the substrate and the conditions beside it. The ranges here are the catalog specification; the batch COA is the document that confirms one drum of cellulase powder. In one lineA cellulase activity figure is a rate measured under one assay, so the certificate has to carry the unit, the substrate and the conditions next to the CU/g. ## The certificate as a test report A certificate can be audited only if every row carries what was measured, the method behind the number, and the limit the lot was released against. For an enzyme the activity row needs a fourth element, the assay conditions. Release specification · cellulase powder from Aspergillus niger | Parameter | Method | Release limit | Appearance | Visual | Off-white to light tan, free-flowing powder | Cellulase activity | Reducing-sugar assay on carboxymethyl cellulose, CU/g | ≥50,000 CU/g | pH (1% solution) | Potentiometry | 4.5–5.5 | Loss on drying | Gravimetric | ≤8.0% | Particle size | Sieve analysis | ≥95% through 40 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤10,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent The activity row, read line by line | Element | What it has to say | Why it changes the figure | Unit | CU per gram of powder as sold | Per gram of preparation, not per gram of protein | Substrate | Carboxymethyl cellulose, or filter paper | Soluble CMC reads endo action only | Temperature | Usually 50 °C | A rate at one temperature does not describe another | pH | 4.5, 4.8 or 5.0, per the house method | The same powder reads lower at pH 3 | Detection | DNS colour against glucose, or fluidity | Two principles, two scales | Basis | As-is, or corrected to dry solids | Moisture moves the number at unchanged activity ## What the CU/g figure measures A unit of cellulase is a rate, not a weight and not a purity. One CU is defined by the assay that produces it: either the amount of enzyme that liberates a set quantity of reducing sugar from carboxymethyl cellulose per minute as glucose equivalents, or the amount that produces a defined change in the fluidity of a CMC solution in five minutes at 50 °C and pH 4.5. Both definitions are in trade use, and the certificate has to say which one it follows. The substrate decides what is counted. Carboxymethyl cellulose is soluble, so a CMC assay reads endo-1,4-β-glucanase action and largely ignores the cellobiohydrolase and β-glucosidase in the same broth. A preparation can carry a high CU/g and a modest action on insoluble cellulose, or the reverse. The note on CU, EGU and FPU separates the scales. The reading comes from dinitrosalicylic acid colour at about 540 nm, converted through a glucose standard curve and divided by incubation time and enzyme charge; each of those steps is somewhere two laboratories can diverge. Protein by a colorimetric assay against a bovine serum albumin standard gives the second useful number: units per milligram of protein separates a concentrated preparation from one extended with carrier. ## Release limit versus batch result Activity is a one-sided limit: a lot at 52,000 CU/g and a lot at 78,000 CU/g both pass ≥50,000 CU/g. The release result, not the limit, tells a formulator how much headroom the powder carries into a process step that will consume part of it. A result column that repeats the specification is not a result, and the word "conforms" is a conclusion the reader should be able to reach from the numbers. Ask for the measured value, the method reference and the release date on the same page. Activity also falls in storage, so the certificate should state the release date, the storage conditions assumed and the activity guaranteed at the end of the declared shelf life. A drum received six months after release is bought at the lower figure. Request the assay's repeatability as well: with a wide relative standard deviation, a result a few percent above the limit is a coin toss on retest. ## What moves between batches The fermentation sets the starting point: strain, medium, induction and harvest shift the balance of enzymes in the broth. Recovery and ultrafiltration decide how much of that balance reaches the concentrate, and standardisation with a carrier sets the final activity per gram. A supplier holding ≥50,000 CU/g is choosing where in the concentrate to land, so the spread between lots is a process decision as much as a biological one. Moisture, pH and particle size move with drying and milling and move the activity figure with them: a wetter powder reads lower per gram at constant true activity, and a milling step that generates heat can destroy activity before the sieve is reached. Colour is the least quantitative signal and often the most revealing: a darker tan can follow a hotter dry or a longer hold while the assay still passes, so read the batch record before rejecting a lot on colour. Watch the method as closely as the number: if substrate grade, buffer or incubation time changes between lots, two certificates that both say CU/g are not comparable. ## When an outside laboratory earns its fee An independent test is worth ordering for a new source, a first shipment into a regulated market, a label claim that rests on the activity figure, or a disputed result. The panel is narrow: activity by the buyer's own CU method on a retained sample, protein, loss on drying, heavy metals by ICP-MS, microbiology and a protein pattern by gel electrophoresis. The referee has to run the same substrate and conditions as the specification, or the comparison measures methods rather than powder. Ask for the detection limit on each metal; a "not detected" line without a limit describes the method, not the sample. The sample tested should be the sample retained, with the lot code on both. ## What to compare between suppliers Put six lines side by side: unit definition, substrate, assay conditions, activity result with method, protein and specific activity, moisture and particle size. Two quotations that agree on CU/g but differ on the other five are not describing the same preparation, and the gap surfaces at the first process trial. Traceability is the second layer. The lot code should be identical on the certificate, the pack and the retained sample, and the certificate should name the production organism and strain, because the source is part of a food enzyme's identity. A correct certificate can still belong to a different lot than the one on the loading dock. The catalog numbers sit on the cellulase product page, the tests that separate a genuine lot from a diluted one are on the identity page, the release workflow behind the certificate is on the quality page, and the vocabulary is in the COA glossary entry. ### 02 50,000 CU/g or a dilution: choosing a cellulase grade URL: https://nutrition.rainwoodbio.com/products/enzymes/cellulase/grades/ Reviewed: 2026-11-19 A cellulase grade is set by three things: how much activity one gram carries, what that activity sits on, and the physical form of the powder. A 50,000 CU/g concentrate suits a blend that needs only tens of milligrams per batch; a dilution to an agreed lower activity suits a formula that has to weigh a visible amount at pilot scale. The CU/g figure is the first half of the choice, and the carrier is the second. In one lineChoosing a grade is choosing what one gram of powder does and what else arrives with it, so the CU/g figure alone does not settle the decision. ## Why an enzyme has grades but no purity A mineral salt can be sold at 98% or 99% because the assay measures the molecule against everything else in the drum. An enzyme preparation cannot be described that way. The powder contains the enzyme, the remains of the fermentation, and whatever carrier the manufacturer used to standardise the activity, so the useful description is a declared activity plus the identity of the carrier and the form of the particles. That is why two suppliers can both offer "cellulase" and mean different materials: one sells a concentrate at ≥50,000 CU/g, the other a diluted powder at a fraction of that figure, and the second carries several times the mass for the same number of units. Neither is wrong. They are different grades with different jobs, and the certificate for each one has to be read the same way — see the COA page for the line-by-line reading. What a grade actually fixes in a formula | Property | What it controls | Where it shows up | Activity (CU/g) | How many units a gram delivers | Dose weight, label claim, overage | Carrier | What the activity is diluted on | Ingredient list, moisture, flow | Particle size | How the powder flows and dissolves | Blend uniformity, dust, mixing time | Physical form | Powder or granule | Dust control, dissolution rate | Source strain | Which organism produced the enzyme | Identity file, regulatory dossier ## The three options side by side The catalog range covers a 40 mesh powder at ≥50,000 CU/g, a lower-activity dilution on request, and a granulated form on request. The practical difference between them is dose weight, dust and the amount of carrier that enters the formula. Grade options and what changes when you switch | Option | Activity | Physical form | What changes in the formula | Standard powder | ≥50,000 CU/g | 40 mesh powder | Smallest dose weight; concentrate for blends | Lower-activity dilution | Agreed in the specification | 40 mesh powder | Larger dose weight; carrier becomes an ingredient | Granulated | Agreed in the specification | Granules | Less dust; slower dissolution; check the granulation loss The activity figure is only comparable when the unit is. A CU/g from one supplier and an EGU/g from another are not the same measurement, and the page on CU, EGU and FPU explains why the numbers cannot be converted. ## Powder, mesh and dust The catalog particle size is ≥95% through 40 mesh, which is a free-flowing powder that blends well into a dry mix and dissolves to a clear to slightly hazy solution. Fines are what make it dissolve quickly and what make it dust. Because enzyme powders are respiratory sensitisers, dust is a handling and documentation question as much as a processing one: the SDS carries the hazard statements, and the controls are local exhaust ventilation, closed transfer and the right mask. Granulation trades dissolution speed for dust control. A granule wets more slowly, so a drink mix that has to disperse in seconds is usually built on powder, while a plant that handles kilos of enzyme a day may prefer granules to keep the air clean. Whichever form is chosen, the granulation step itself removes activity, and the after-step figure belongs in the specification. ## The arithmetic that decides the grade Units are weight multiplied by activity. For every 1,000 CU a formula needs, a 50,000 CU/g powder contributes 0.02 g and a 10,000 CU/g dilution contributes 0.10 g. The units are identical; the mass, the carrier and the label entry are not. Moving from the concentrate to a five-fold dilution multiplies the powder weight by five and puts four parts of carrier into the blend for every one part of enzyme powder. Weighability is the argument that usually settles it. A 0.02 g charge is routine in a production batch and awkward in a 5 kg pilot, where the balance and the mixing both struggle with a speck of powder. A dilution makes the same number of units weighable, while carrying the carrier through the whole formula and into the ingredient declaration. Two cautions sit beside the arithmetic. First, the label claim has to name the basis: activity at release or activity at the end of shelf life. Second, the dilution is a manufacturing step, so the certificate for a diluted grade should show the activity of that diluted lot, not the activity of the concentrate it came from. ## How to write the grade into a specification A specification that cannot be tested is not a specification. Six lines make this one testable: the activity with its unit and the assay reference; the carrier identity; loss on drying at ≤8.0%; particle size at ≥95% through 40 mesh; the production organism and strain; and the form, powder or granule. Add the labelled basis — release or end of shelf life — and the storage statement. Write the limit as a one-sided figure ("not less than") and keep the unit definition beside it, because a change of substrate or assay conditions between lots makes two results incomparable even when both say CU/g. The catalog values are on the cellulase product page; the checks that keep a diluted lot honest are on the identity page. ## When a dilution is the wrong choice Three situations argue against diluting. A blend that is already close to its carrier limit gains nothing from more maltodextrin or glucose. A formula with a tight moisture budget gains nothing from a carrier that holds water. And a label that has to carry a compact ingredient list gains nothing from an entry that exists only to make the powder weighable. There is also a process reason: every extra carrier is another material that has to be dispersion-tested, declared and held in inventory, and a dilution that solves a weighing problem at pilot scale can be the wrong grade once the batch is large enough to weigh the concentrate accurately. ### 02.1 CU, EGU and FPU: what an enzyme activity unit actually means URL: https://nutrition.rainwoodbio.com/products/enzymes/cellulase/grades/activity-units/ Reviewed: 2026-11-19 An activity unit is a rate, not a mass: it names the amount of enzyme that produces a defined change in a defined substrate under defined conditions in a defined time. CU, EGU and FPU are three assay scales with different substrates and different end points, so a figure in one unit cannot be converted into another by arithmetic. The only honest conversion is to run both assays on the same sample. In one lineA unit exists only as the assay that defines it, so CU, EGU and FPU are three different measurements rather than three names for one number. ## Four names, and one that carries no meaning Enzyme suppliers describe the same kind of powder in different unit systems, and the purchase order has to pick one. The table sets out what each name actually measures; the entries are not ranked, because a unit is not better or worse than another, only more or less suitable for the specification that will verify it. What each activity unit measures | Unit | Substrate | What the assay reads | Where it comes from | CU | Carboxymethyl cellulose | Reducing sugar released per minute, or a fluidity change | House method, common for cellulase preparations | EGU | Carboxymethyl cellulose | Endo-glucanase action, often by viscosity | Supplier systems built around endo activity | FPU | Filter paper | Total saccharification by the whole complex | IUPAC filter-paper method | IU or U | Stated per assay | One micromole of substrate per minute | Generic; valid only with the assay written out | U/g, undefined | — | — | Not comparable to anything The last row is not a joke. A figure offered as "50,000 units per gram" with no substrate, no temperature and no detection principle is not a specification; it is a number that will be argued about at goods-in. ## The substrate decides what is counted Carboxymethyl cellulose is soluble. An enzyme attacking it does not need to open up a solid surface first, so a CMC assay reports the endo-acting component of the preparation — the part that cuts the chain in the middle. That is why CU and EGU assays can both be run on CMC and still be different scales: they differ in conditions and in the detection principle, not only in the name. Filter paper is insoluble. Breaking it down needs endo activity, exo activity and β-glucosidase working in sequence, so the filter-paper assay reports the whole complex at work on a solid substrate. The same powder that reads tens of thousands of CU/g reads a far smaller number of FPU/g, not because one assay is wrong but because they are measuring different jobs. A conversion factor between them would be a claim that the ratio of endo to exo activity is fixed across preparations, and it is not. This is also why the identity page counts the unit and the substrate as part of the description of the material rather than as a footnote to the activity figure. ## Conditions move the number Assay conditions and their effect on the reported figure | Condition | Common settings in trade | Why the figure moves | pH | 4.5, 4.8 or 5.0 | The enzyme is not equally active across the window | Temperature | 40 °C or 50 °C | Rate roughly doubles per 10 °C until the protein unfolds | Incubation time | 30 or 60 minutes | The reaction is linear only for part of its course | Detection | DNS colour, or viscosity | Reducing ends and fluidity are different observations | Standard | Glucose, or cellobiose | The calibration curve sets the scale of the answer Two laboratories can follow the same unit name and land on different figures by choosing different settings within the same family. That is not misconduct; it is what an assay is. The practical answer is to write the settings into the specification and to keep them there — the COA page shows where those lines belong on the certificate. ## Why there is no conversion factor A conversion factor would need the ratio between two activities to be constant across every preparation. It is not: the fermentation, the recovery step and the standardisation each change the balance between endo activity, exo activity and β-glucosidase, so two powders with the same CU/g can sit at different FPU/g. A factor quoted in a catalogue should be read as "typical for our product", not as a physical constant. What does convert is the total number of units. One kilogram at 50,000 CU/g carries fifty million CU. Two kilograms of a 25,000 CU/g dilution carry the same fifty million CU, spread over twice the mass. That arithmetic is exact and useful for ordering and for blend calculations; it says nothing about how the units relate to another unit system. When a customer needs a figure in a unit the supplier does not normally report, the answer is a test, not a calculation: ask for the assay to be run on the lot, in the buyer's unit, with the method stated. The vocabulary is in the assay glossary entry. ## What the label and the specification have to say Under the EU food enzyme regulation, a food enzyme sold to a manufacturer carries its declared activity in the stated unit, alongside the name, the food-use statement, the lot and the storage conditions. A figure without the unit is an incomplete label, and a unit without the method is an incomplete specification. In the United States the activity is a specification rather than a nutrient, so it does not belong in a nutrition panel as though it had a daily value. The ingredient declaration names the enzyme when it has a function in the finished food; the activity figure lives in the specification and the certificate. Either way, state the basis: activity at release, or activity guaranteed at the end of shelf life. The two are different promises, and a label that does not say which one it makes is ambiguous. ## Which unit to specify Specify the unit the finished-product specification can verify. For a cellulase powder dosed into a dry blend, CU/g on carboxymethyl cellulose is the practical choice, because the assay is quick, the substrate is soluble and the result tracks the endo activity the blend was built around. Choose EGU only when the supplier's system is already EGU-based and the blend is dosed against it; choose FPU when the job is saccharification of insoluble cellulose and the whole complex matters. Whatever the choice, three things belong beside it: the method reference, the conditions, and the basis. A specification with those three can be tested at goods-in; one without them can only be discussed. The grade options themselves are compared on the grades page, and the catalog figures are on the cellulase product page. ### 03 Cellulase activity falls with heat and moisture; the process decides the shelf life URL: https://nutrition.rainwoodbio.com/products/enzymes/cellulase/stability/ Reviewed: 2026-11-19 Dry cellulase powder loses activity slowly; the loss accelerates with moisture, with heat, and with a pH away from the 4.5–5.5 window the powder is made for. The step that puts the enzyme into the product — wet granulation, a heated dry, a tablet press — usually removes more activity than the storage that follows. That is why a shelf life belongs to a process and a pack, not to a powder on its own. In one lineA sealed pack holds the activity; the wet step, the heat and the water activity of the finished blend decide how far it has fallen by the end of shelf life. ## The powder in its sealed pack At low water activity the enzyme is close to inert. The protein is dry, molecular motion is limited, and the reactions that destroy activity need water. A foil pouch or a lined drum at ambient temperature therefore holds the declared activity for a long time, and the loss over months is small compared with what a single wet process step can remove in an hour. Two habits protect that state. The first is to keep the pack closed until the batch is ready: the powder is hygroscopic, and an open pouch in a humid room picks up water quickly. The second is to read the loss-on-drying result as a release gate rather than a storage specification. The catalog limit is ≤8.0% and the loss-on-drying note explains what the figure does and does not say about the water that matters. ## Once the powder is dissolved Dissolved, the enzyme is a protein in water with its native structure exposed, and the loss of activity is fast enough to be a formulation problem rather than a storage footnote. Temperature, pH and time set the rate; a solution held warm for a shift can lose a noticeable share of its activity before the filling line is reached. Microbial growth in a wet system adds a second route to loss, because contaminating organisms release proteases that cut the enzyme. A liquid blend is therefore a stability question rather than an arithmetic one: the number comes from a study on the actual preparation. Pasteurisation and hot fill are the hard cases. Cellulase from Aspergillus niger works at an optimum near 50 °C and unfolds above roughly 60 °C, so a heat step of minutes at 70–90 °C removes a large share of the activity, and the loss is not recovered on cooling. If the process needs that heat, the activity has to be dosed for the far side of it. ## What actually destroys activity Loss routes and the control that answers each one | Factor | What happens | Control | Heat above about 60 °C | Protein unfolds; the loss is irreversible | Dose after the hot step, or overage for it | Moisture in the blend | Water restores mobility; hydrolysis and oxidation resume | Keep water activity low; dry the granule | pH below 4 or above 7 | Structure changes away from the working window | Buffer the wet blend near pH 4.5–5.5 | Wet granulation | Water plus binder plus drying heat in one step | Low-water binder, short low-temperature dry | Tablet compression | Local heat and shear at the punch | Direct compression; check activity in the tablet | Trace metals | Iron and copper catalyse oxidation of the protein | Source the mineral salts; test the blend | Opening the pack | Humid air enters the headspace | Reseal, desiccant, small packs for samples ## A stability protocol that answers the question Three production lots, one assay method, and time points at 0, 1, 3, 6, 12 and 24 months at 25 °C and 60% relative humidity. Add a second condition at 30 °C and 65% relative humidity, or at 30 °C and 75% for a tropical market, plus a six-month accelerated run at 40 °C and 75%. Test activity, loss on drying, appearance and microbiology at every point. Run the study on the material the customer receives, in the pack the customer receives. A study on the concentrate in a laboratory jar says little about a diluted grade in a foil stick, because the carrier, the headspace and the fill weight have all changed. Where a process step is planned, run a sample of the blend before and after that step as well, so the process loss is measured rather than assumed. Report the result as a percentage of the initial activity, not only as an absolute figure. A lot that starts at 60,000 CU/g and ends at 51,000 CU/g has lost 15%, and the absolute number hides whether the drop came from the material or from the starting point. ## The blend is part of the stability Neighbours matter. An acidic fruit powder lowers the local pH as soon as any water is present, and a wet blend that sits at pH 3.2 for an hour is outside the window the enzyme was made for. Ascorbic acid with a trace of iron or copper generates oxidants that attack the protein. Mineral salts can inhibit or catalyse depending on the metal, and a reducing sugar in a heated wet granulation gives colour and holds water in the granule. The process choice follows from that. Direct compression and dry blending are gentler: no water is added and no drying heat is applied. If the formula needs granules, the binder should be low in water, the dry short and the temperature low, and the activity of the granule should be measured rather than calculated from the powder. The custom processing page sets out how a process trial is scoped. Packaging closes the loop. A foil laminate with a good seal, a desiccant where the climate demands it, and a fill weight that leaves little headspace all slow the loss. A stick pack is not a drum: the surface-to-mass ratio is far higher, and the pack is opened once and used at once. ## Assigning a shelf life A shelf life is assigned from the study on the actual pack, not from a general statement about enzyme powders. Take the time at which activity stays above the declared end-of-shelf-life figure, subtract a margin for the assay and the lot-to-lot spread, and write the storage conditions beside it. One lot is not a shelf life. Three lots show the batch-to-batch spread, and a single lot can be an unusually good one. If the label claim is "not less than 50,000 CU/g at end of shelf life", the release specification needs headroom above that figure to cover the loss and the spread, and the stability data sets the size. The storage statement belongs on the pack and on the certificate: keep dry, keep closed, and avoid heat above the working window. The commercial terms around the shelf life — how much of it must remain at delivery — are set out on the MOQ and ordering page, the release workflow is on the quality page, and the catalog figures are on the cellulase product page. ### 04 Cellulase: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/enzymes/cellulase/moq/ Reviewed: 2026-11-19 The catalog minimum is 1 kg, because the smallest unit packed is a 1 kg foil pouch and a 25 kg drum is that pouch repeated. The standard 40 mesh powder ships in 1–7 days from stock; a dilution or a granulated grade is made to the agreed activity and adds a step. A firm quote needs six facts from the buyer, and most of the delay in an enzyme order comes from one of them being missing. In one lineOne kilogram is the ordering unit because that is the unit packed and sealed, and everything above it is that pouch repeated up to a drum. ## Why the minimum is 1 kg An enzyme minimum is not the same kind of number as a mineral minimum. At ≥50,000 CU/g, a single kilogram carries fifty million units, so 1 kg is already a stock quantity rather than a trial size: a blend that uses tens of milligrams per batch will run for a long time on one pouch. The constraint is the pack, not the chemistry — the powder has to be sealed in a moisture barrier, and a 1 kg foil pouch is the smallest unit that seals well and can carry a lot code. Above 1 kg the units are 25 kg drums, so an order of 30 kg is one drum and five pouches rather than a bespoke pack. Buyers who need 5 kg or 10 kg are usually served from pouches, and the packing list should say so, because the lot code on every pouch has to match the certificate. ## Packs and what they protect Ordering units and their construction | Pack | Construction | Net weight | Note | Foil pouch | Aluminium-laminate foil, heat sealed | 1 kg | Smallest sealed unit; one lot code per pouch | Fibre drum | Fibreboard drum with a double polyethylene liner | 25 kg | Open under dust control; reseal the liner between uses | Sample | Sealed pouch drawn from the shipping lot | — | Same lot code as the commercial pack The pack is a stability decision before it is a logistics one. The enzyme is hygroscopic, so the foil laminate and the sealed liner are what hold the activity between the fill line and the customer's weigh booth. A drum that is opened and left with the liner folded back will pick up water from the room, and the activity that was confirmed at release is no longer the activity in the drum. Storage is keep dry, keep closed, and avoid heat; the stability page sets out how much that matters. ## Lead time and what ships with the lot The standard powder is quoted at 1–7 days, counted from the order confirmation and subject to stock at the time. A lower-activity dilution or a granulated grade is a manufacturing step, so the clock starts after the specification is agreed rather than after the purchase order, and the trial quantity has to be made before the commercial quantity can be. Each shipment carries the lot documents: the batch COA with the activity result, the SDS, the specification sheet and the statements the destination market requires. Documents and goods should travel on the same lot code, because a certificate that arrives for a different lot is not a certificate for the delivery. Two timing questions decide most schedules: how much shelf life has to remain at delivery, and whether the buyer needs a pre-shipment sample approved before the balance ships. Both are answered at quotation, not at loading. ## The six facts a firm quote needs What to give a supplier before asking for a firm figure | Fact | Why it changes the offer | Activity and unit definition | CU/g on CMC is not EGU/g or FPU/g | Quantity and pack format | Pouches, drums or a split shipment | Physical form | 40 mesh powder, granule, or a dilution | Source and strain statement | Identity file and market dossier | Documents and destination market | EU, US or UK file; language of the labels | Delivery point and shelf life needed | Incoterm, remaining shelf life at arrival Give the activity as a figure with a unit, and say whether the figure is the release activity or the activity at the end of shelf life. "Cellulase 50,000" without the unit is the single most common source of a quotation that has to be redone, because the unit is the whole specification on an enzyme. ## What to do with the sample Ask for a sample drawn from the lot that will ship, with the lot code on the pouch, and test it the way the specification will be tested. Activity by the buyer's own method is the first check; loss on drying, solubility and behaviour in the blend follow. A sample that only confirms the certificate has not told the buyer anything new. The useful sample is big enough for the process trial as well as the bench work, because the process is where activity is lost. A granulation or a tablet run on a few grams will not show the loss that a pilot run shows, and the sample size should be set with that trial in mind rather than by habit. Keep a retained portion sealed for the life of the claim; the retained-sample note covers why. ## The terms worth settling early Five clauses cover most of the friction. The first is the minimum per shipment rather than per order, since a 1 kg minimum and a 25 kg pack do not always line up. The second is the shelf life remaining at delivery, expressed in months and measured from the release date on the certificate. The third is the retest date and what happens if the buyer holds the material past it. The fourth is change control: a change of production strain, carrier or assay method is a change of material, and it needs notice before the next shipment rather than after it. The fifth is the document set tied to each lot, including the allergen and genetically modified organism statements the destination market asks for. Terms of delivery, packing list format and the language of the labels belong in the same conversation. The catalog numbers are on the cellulase product page, the definitions are in the MOQ glossary entry, and shipping and paperwork are described on the logistics page. ### 05 Where cellulase is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/enzymes/cellulase/compliance/ Reviewed: 2026-11-19 Cellulase is a food enzyme, and the three markets in this review handle food enzymes in three different ways: the EU authorises them through a Union list built on EFSA assessments, the United States works from a GRAS position or a processing-aid basis, and Great Britain applies assimilated EU law through its own authorisation route. What the file has to show is the same everywhere — the production organism and strain, the carrier, the intended use, the activity, and the contaminants — but the document that proves each point differs by market. In one lineThe activity sells the enzyme, but the source organism, the carrier and the market-specific authorisation are what a compliance file has to prove. ## The framework: a food enzyme, not an additive Regulation (EC) No 1332/2008 defines a food enzyme as a product from plants, animals or microorganisms that contains one or more enzymes capable of catalysing a specific reaction and is added to food for a technological purpose at any stage of manufacture, processing, preparation, transport or storage. A food enzyme preparation is that enzyme formulated with additives or food ingredients to help storage, sale, standardisation, dilution or dissolution — which is exactly what a carrier does in a 50,000 CU/g powder. That definition sets the shape of the file: the substance assessed is not cellulase in the abstract but a preparation from a named strain on a named carrier for a named purpose. Change either and the file changes with it. Aspergillus niger is the source named in the specification. It is a filamentous fungus with a long history of use as a production organism for food enzymes, and EFSA has published assessments of cellulase from several non-genetically modified A. niger strains. The strain designation, not only the species, is what the dossier identifies. ## European Union Food enzymes are authorised under Regulation (EC) No 1332/2008, with the procedure in Regulation (EC) No 1331/2008. The Commission builds a Union list of authorised food enzymes by implementing regulation; each entry names the enzyme, the source, the foods it may be used in and the conditions of use. Until an entry applies to a given use, national provisions can continue to govern it, so a supplier's statement that "cellulase is permitted in the EU" is too coarse to be useful. The question to ask is narrower: which Union list entry covers this cellulase, from which strain, in which food category, at what level? Ask for the reference and check it against the current text, because the list is adopted in stages and amended as assessments are completed. Labelling follows the same regulation. A food enzyme sold to a manufacturer rather than to the final consumer carries the enzyme name, a statement that it is for food use, the declared activity in the stated unit, the lot marking and the storage conditions. ## United States There is no premarket approval list for food enzymes in the same sense. A cellulase preparation reaches the US market either under a GRAS determination notified to FDA in a GRAS notice, or on the basis that it is a processing aid — present during manufacture but without a technical effect in the finished food. Which route applies decides what appears on the label. If the enzyme has a function in the finished food, it is an ingredient and appears in the ingredient list by its common name under 21 CFR 101.4. If it qualifies as a processing aid because it is present at an insignificant level with no technical effect, the labelling rules exempt it from declaration. The supplier's basis — the GRAS notice or the processing-aid rationale — belongs in the file, because the buyer's own hazard analysis under 21 CFR 117 rests on it. Two further questions come up in practice: whether the strain is genetically modified, and whether the lead level triggers a California Proposition 65 warning, both answered by documents rather than by the certificate alone. ## United Kingdom In Great Britain, assimilated Regulation (EC) No 1332/2008 continues to apply, and authorisations are handled through the Food Standards Agency's regulated products route rather than through EFSA. Northern Ireland follows the EU list under the Windsor Framework, so a pack sold in Belfast and a pack sold in Manchester can sit under different authorisations. Check the current GB position before a first shipment. ## Contaminants and the arithmetic of exposure The catalog limits are Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg, with APC ≤10,000 cfu/g, yeast and mould ≤100 cfu/g, and E. coli and Salmonella absent. Those are limits on the raw material. The legal limits that matter are on the finished food, and the bridge between them is the dose: at 0.02 g of powder per unit of product and a lead level at the 3 mg/kg limit, the contribution is about 0.06 µg of lead. That arithmetic is why the specification limit is not the same question as the legal limit. Regulation (EU) 2023/915 sets maximum levels for lead, cadmium and mercury in food supplements — 3.0, 1.0 and 0.10 mg/kg respectively — and those apply to the supplement as sold. Arsenic maxima are set by food category, so the applicable level is checked against the finished product. The EU regulatory note tracks the instrument. ## Where the label has to stop An enzyme activity is a technological specification, not a nutrition content, so there is no reference intake to declare and no daily value to express it against. A label or a web page can say that the product contains cellulase at a stated activity, and that the enzyme is used for a technological purpose in manufacture. It cannot turn that activity into an outcome for the person taking the product. That rule applies here as much as to a customer's label: no health claim, no structure-function claim and no disease-related claim is made for cellulase. The editorial policy sets the line these pages follow. ## The document set, and who issues each part Documents a food enzyme file is expected to hold | Document | Issued by | What it has to show | Batch COA | Manufacturer | Activity result, method, contaminants, lot code | Specification sheet | Manufacturer | Release limits and unit definition | SDS | Manufacturer | Hazard statements, dust controls, transport class | Strain and source statement | Manufacturer | Organism, strain, culture collection if held | GMO statement | Manufacturer | Whether the production strain is modified | Allergen statement | Manufacturer | Carrier and fermentation-derived residues | Authorisation reference | Supplier or regulator | Union list entry, GRAS notice or GB authorisation ## A buyer's checklist Six questions cover the review: which strain, by designation; which Union list entry or US basis, with a reference; which carrier; which activity unit, defined by substrate and conditions; which contaminant limits, with the method; and which label statement, in the market's language. A file that answers all six can be reviewed in an afternoon. The strain and activity questions are worked through on the identity page; the market notes are collected under US and UK regulatory references, and the product specification sits on the cellulase product page. ### 06 How we prove a cellulase lot has the declared activity URL: https://nutrition.rainwoodbio.com/products/enzymes/cellulase/identity/ Reviewed: 2026-11-19 A cellulase lot takes four layers: what the material is, how the activity was measured, which protein carries it, and which documents tie the numbers to the drum. A CU/g figure is one layer; it cannot separate a concentrate from a diluted lot still described at the original activity, or from one whose assay ran against a different substrate. In one lineIdentity is proved by the organism, the assay and the protein figure together, and the lot code is what ties all three to the bag. ## The four layers of identity The first layer is the preparation itself: a powder from Aspergillus niger, CAS 9012-54-8, standardised to a declared activity, on a carrier that is named rather than implied. The second is the activity, measured by an assay whose substrate, temperature, pH and detection principle are written down. The third is the protein the activity sits on, because a rate per gram becomes comparable only against that protein. The fourth is the paper trail: certificate, lot code, retained sample and strain statement. ## The activity assay, and why the method is part of identity The assay incubates a dilution of the powder with carboxymethyl cellulose in a buffer, stops the reaction, develops colour with dinitrosalicylic acid, reads absorbance at about 540 nm and converts through a glucose standard curve. The result is divided by the incubation time and the enzyme charge to give units per gram. A blank, a duplicate and a standard curve are what turn a colour into a number. Every step is a variable: a different CMC grade changes the substrate, a different incubation time moves the reading along a partly linear curve, a different standard changes the slope. Two laboratories can both report “50,000 CU/g” and measure different things, so the method reference belongs in the specification. The assay is also where adulteration is easiest. Because the detection step reads reducing sugar, anything that adds reducing sugar to the extract raises the result without adding enzyme. That is why the COA page insists on the blank, the standard curve and the method reference beside the result. ## What CU means, and what it does not One CU is defined by the assay that produces it — a quantity of reducing sugar released per minute, or a defined change in CMC solution fluidity. Both definitions are in trade use and are not interchangeable; an activity figure is meaningful only with its unit and method attached. The comparison of CU, EGU and FPU sets out why the scales do not convert. The unit also fixes what is counted. A CMC assay reads endo-1,4-β-glucanase action, not the cellobiohydrolase and β-glucosidase in the same preparation. A lot can be identical on CU/g and differ in the balance of the complex. ## Protein, specific activity and the source Protein is measured colorimetrically against a bovine serum albumin standard. Divide the activity by the protein and you get specific activity, units per milligram: the number that separates a concentrate from a dilution, because dilution lowers both figures while the ratio holds. The source closes this layer. Aspergillus niger is a filamentous fungus used as a production organism for food enzymes, and the strain designation is part of the identity of the preparation. A statement that names only the species is weaker than one that names the strain and the culture collection where it is held. ## Activity against protein, and what the ratio shows The useful form of the protein figure is the ratio: CU per milligram of protein. It is comparable only within one supplier and one assay, because the CMC method counts endo-glucanase action while the protein figure includes every protein the fermentation left behind. A falling ratio at constant CU/g means more protein per unit of activity — carrier loading, a different recovery cut or an inactivated fraction. A high protein figure with low activity points to inactivation or added non-enzyme protein; a low protein figure with normal activity points to a purified preparation, a different product. None of those movements is visible on the activity line alone. ## XRD, and why it is not an identity test for an enzyme An enzyme powder is amorphous. Its X-ray diffractogram is a broad halo, not sharp reflections, so XRD cannot distinguish a cellulase from another enzyme preparation, confirm the Aspergillus niger source or measure activity. Sharp peaks in a commercial powder usually belong to a crystalline carrier or a mineral contaminant, not to the enzyme. Protein crystallography starts from a single purified crystal, not a drum of standardised powder. Identity evidence therefore comes from the CMC assay with its blank and standard curve, the protein figure and an electrophoretic band pattern against a reference lot; a chromatographic profile can be added when the recovery route changes. ## The ways a lot can be other than it claims Failure modes and the test that exposes each | Mode | What it looks like | What catches it | Dilution with carrier | Normal powder, lower CU/g than the label | Activity plus protein, both low together | Reducing sugar added | Assay reads high, protein normal | Blank, sugar screen, specific activity | Other enzyme substituted | CU/g plausible, behaviour differs | Protein pattern, strain statement | Heat-inactivated blend | Correct appearance, low activity | Activity at two incubation times | Undeclared carrier change | Specification sheet unchanged | Carrier identity, change-control notice | Mislabelled lot | Certificate belongs to another drum | Lot code on pack, certificate and sample The first two modes pull in opposite directions: dilution drives activity down, added reducing sugar drives the reading up. Run activity and protein on the same sample and the pair tells you which one you are looking at. A lot reading 50,000 CU/g at 2% protein and one reading the same at 10% protein are not the same material. ## Writing the specification so it can be checked A testable specification carries the activity with its unit and method reference, the protein or specific-activity range, loss on drying, particle size, the carrier identity, the production organism and strain, the labelled basis, and the storage statement. Two habits make the difference. Write the activity as “not less than”, with the unit defined once in a method appendix held under change control. Then state the identity test applied to each new lot — the strain statement, the protein pattern against a reference lot, or both — so identity is routine, not a reaction to an odd result. The vocabulary is in the specification glossary entry. ## Five questions to put to a supplier First, which strain produced this lot? Second, what does the CU definition mean in your assay — substrate, temperature, pH and incubation time? Third, what are the activity and protein figures for this lot, and what is the specific activity? Fourth, what test would show that this powder is not a dilution, and will you run it? Fifth, which document carries the lot code that matches the pack? A supplier who answers all five in writing gives a buyer material to audit. One who answers only the third gives a number, the easiest layer to produce and the hardest to verify. The catalog figures are on the cellulase product page, and the release process is described on the quality page. ### 01 What the COA for sodium hyaluronate actually contains URL: https://nutrition.rainwoodbio.com/products/specialty/hyaluronic-acid/coa/ Reviewed: 2026-11-19 Sodium hyaluronate (CAS 9067-32-7) is a linear glycosaminoglycan, and its certificate is not a single purity figure. A usable COA reports appearance, sodium hyaluronate by HPLC, glucuronic acid by UV, molecular weight, pH, protein, loss on drying, particle size, the heavy-metal panel and microbiology. Each line needs a method, a release limit and a stated basis; the catalog ranges sit on the product page, while the batch COA is the record for one lot. In one lineA sodium hyaluronate certificate only identifies the lot when the assay, the glucuronic acid figure and the molecular weight are reported on stated bases with named methods. ## The certificate as a line-by-line report A COA earns its place in a supplier file when a reviewer can reconstruct the release decision from the page. That takes three columns: what was measured, how, and the release limit. A certificate that prints only “conforms” moves the decision back to the supplier. Identity, assay and solution parameters · sodium hyaluronate | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Sodium hyaluronate | HPLC | ≥91.0% | Glucuronic acid | UV or colorimetric method | ≥44.0% | Molecular weight | SEC-MALLS or viscometry | 1.0–1.5 MDa | pH (1% solution) | Potentiometry | 6.0–7.5 | Protein | Colorimetric or UV | ≤0.1% The second block covers handling and contamination. Physical, contaminant and microbiological limits | Parameter | Method | Release limit | Loss on drying | Gravimetric | ≤10.0% | Particle size | Sieve analysis | ≥95% through 80 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent ## What the 91% and 44% figures measure Sodium hyaluronate is the sodium salt of a repeating disaccharide of glucuronic acid and N-acetyl-D-glucosamine. The sodium salt repeat unit has a formula mass of about 401 g/mol, and glucuronic acid is about 43.9% of that mass. The ≥44.0% line therefore sits at the stoichiometric ceiling for the dry salt, not at an arbitrary impurity threshold. That arithmetic makes the basis decisive. If 91.0% sodium hyaluronate and 44.0% glucuronic acid were both reported as-is mass fractions, the glucuronic acid would be about 48% of the polysaccharide, which the repeat unit cannot supply. The results reconcile only when one is on the material as sold and the other on the dried polysaccharide, or when the methods use different standards. The certificate should print the basis and standard beside each result; the reviewer should not divide one by the other until they match. Protein and nucleic acid are the other side of purification. Protein is capped at ≤0.1%; it is residual fermentation or tissue material, it contributes nitrogen and UV absorbance, and it is not hyaluronan. Nucleic acid is a separate residue from the production organism and belongs in the file as a result, even where the catalog prints no limit. A low protein figure with no nucleic acid result answers half the question. Loss on drying is water, not hyaluronate. A lot near the moisture ceiling carries less dry matter than a dry lot, and its 91% assay rides on more water. pH is measured at 1% in water; it picks up residual acid or alkali and sets the window in which the chain is stable. ## The molecular-weight line Molecular weight is a distribution, not a single molecule. The catalog range is 1.0–1.5 MDa, an average for the grade; a batch can sit anywhere in that window and still be the grade, while the distribution around it can differ. The certificate should name the method — SEC-MALLS, or viscometry with a declared Mark–Houwink relationship — because the two do not report the same average. A number without a method cannot be compared with a competitor’s number or a previous lot. “Low molecular weight” is relative too: the specification has to state the range and the method. The grade page sets out the working bands. ## Release limit versus batch result The release limit is the gate; the batch result is what was measured. They belong in separate columns. A result column filled with the specification range is not a result, it is a copy of the gate, and it hides drift until a lot fails. Some lines need more attention. Sodium hyaluronate near 91.0% and glucuronic acid near 44.0% sit at the edge of what the material can be, so a result at the limit deserves the raw data. Loss on drying near 10.0% reduces dry matter and shelf-life margin. Molecular weight near either end of 1.0–1.5 MDa changes viscosity at the same concentration, which is a formulation fact even when the lot is released. “Passes specification” is a conclusion. The buyer should be able to reach it from the page. ## What moves between batches Fermentation batches move in molecular weight, protein and colour; purification and drying move moisture, pH and particle size. A molecular weight that drifts downward across lots can come from a longer hold, a hotter drying step or a different recovery step, and the assay may stay inside its window while the viscosity falls. Colour and odour are less quantitative and often more revealing. A yellow or tan tint can point to a hot dry, residual medium or trace metal; a sour or fishy odour can point to a fermentation residue or an animal source. Neither is a specification line, but both are reasons to open the batch record. Read the trend, not one certificate. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a molecular-weight claim the certificate does not prove, or a disputed result. The useful panel is not a full repeat: HPLC with UV detection, a glucuronic acid assay, SEC-MALLS, FTIR, ICP-MS and microbiology, all on one submitted sample. Ask the laboratory to report its detection limit and its calibration standard. A “not detected” line without a limit is evidence about the method’s sensitivity, not about the sample. The same principle applies to the sodium hyaluronate assay: the report should name the column, the detector, the standard and the basis, not only the percentage. An outside laboratory is also the referee when a result is contested. Give it the retained sample, the supplier’s certificate and the specification, and keep the chain of custody tied to the lot code. ## What to compare between suppliers Put six lines side by side: source route; sodium hyaluronate result, method and basis; glucuronic acid result, method and basis; molecular weight result and method; protein and nucleic acid; moisture and pH. Two quotations that agree on the assay but diverge on the other five are not describing the same powder. The second layer is traceability. The lot code should match on certificate, drum and retained sample. The certificate should name the manufacturer, the source route and the drying and milling steps; a correct certificate can still belong to another drum. The catalog specification sits on the sodium hyaluronate product page. The identity tests are on the identity page, the release workflow on the quality page, and the HPLC method note at HPLC for ingredient identity. The moisture line is defined in the loss-on-drying entry. ### 02 High, medium or low molecular weight: choosing a hyaluronic acid grade URL: https://nutrition.rainwoodbio.com/products/specialty/hyaluronic-acid/grades/ Reviewed: 2026-11-19 Sodium hyaluronate is sold in molecular-weight bands, and the catalog grade on this page is 1.0–1.5 MDa. The band, not the ≥91.0% assay, decides the viscosity at a given solids level, which dosage forms fit, and what the label can support. A lower-molecular-weight grade is available on request; it carries the same CAS number 9067-32-7 but a different specification. In one lineThe molecular-weight grade, not the headline assay, decides the viscosity, the dosage form and what the label can support. ## Why molecular weight is the grade decision Hyaluronan is a polymer, not a single molecule. The same repeating disaccharide can be assembled into chains of very different length, and the chain length changes the hydrodynamic volume the molecule occupies in water. The assay measures the mass of polysaccharide in the sample; it does not measure how long the chains are. Two lots that both report ≥91.0% can behave differently in the same formula when one is 1.4 MDa and the other is 0.3 MDa. The words high, medium and low are commercial descriptions, not a legal classification. A supplier’s “high” may begin at a different point from another supplier’s, and a certificate that says only “high molecular weight” cannot be compared with anything. The specification has to carry a numeric range and the method that produced it. The bands below are the working definitions used on this page, not a pharmacopoeial standard. The grade is also the first thing to settle in a formulation project. Capsule size, stick weight, mixing time and the clarity of a drink all depend on it. Changing the grade after the artwork is approved means repeating the formula and the stability work. ## High, medium and low bands side by side Working molecular-weight bands for sodium hyaluronate | Band | Molecular weight | Viscosity at equal solids | Where it usually fits | High | ≥1.0 MDa; catalog 1.0–1.5 MDa | Highest | Capsules, tablets and low-solids sticks | Medium | 0.1–1.0 MDa | Moderate | Sticks, tablets and mixed formats | Low | <0.1 MDa | Lowest | Higher-solids drinks and small sachets The table is qualitative on purpose. Viscosity depends on concentration, temperature, shear rate and the measurement system as well as on molecular weight, so a viscosity figure without those conditions is not a specification. If viscosity matters to the filling line, write it into the specification with the concentration, temperature and spindle or shear rate. ## Content, viscosity and solubility At the same concentration, a higher-molecular-weight chain occupies more volume and gives a more viscous solution. A formulator can reach a target viscosity with less high-molecular-weight solids, or with more low-molecular-weight solids. That trade is the practical meaning of the grade: it decides how much powder fits into a capsule, a stick or a bottle at a workable thickness. All three bands are soluble in water, but they do not dissolve at the same speed. A high-molecular-weight powder wets slowly and can form lumps if it is added too quickly; a low-molecular-weight powder dissolves faster and is easier to bring to a clear solution. The 80 mesh particle size helps dispersion and blending, but it does not change the chain length. A granulated grade, available on request, changes flow and dusting rather than molecular weight. The catalog sets sodium hyaluronate ≥91.0%, glucuronic acid ≥44.0%, protein ≤0.1%, loss on drying ≤10.0% and pH 6.0–7.5 in 1% solution. Those limits apply to the grade on this page; a low-molecular-weight grade is quoted against its own specification, and the assay alone does not distinguish it. The COA page explains how the assay and moisture figures interact. ## Capsules, sticks and beverages A capsule or tablet has a fixed volume, so the grade and the amount per serving have to be decided together. A high-molecular-weight grade usually needs less material to build viscosity, but it also hydrates slowly; a low-molecular-weight grade needs more material for the same thickness but disperses faster. The right choice depends on the fill weight and the process, not on a general rule about which grade is better. A powder stick is a dry blend until the consumer adds water. The grade affects how quickly the stick disperses and how thick the drink becomes. A high-molecular-weight grade at a low dose can give a clean, light-bodied drink; a low-molecular-weight grade at a higher dose can keep a small sachet within a workable volume. A functional beverage is the most demanding format because clarity, viscosity and solids all compete in one bottle; a low-molecular-weight grade is often the easier starting point when the solids load is high. None of this is a health claim. The format decision is about physics and fill weight: how the powder wets, how the solution flows, and how much material fits in the unit the customer will use. ## What changes when you change grade A grade change is a specification change even when the CAS number stays the same. The molecular-weight range and method change, the viscosity at a given solids level changes, the dissolution time changes, and the stability study has to be repeated in the new matrix. A capsule study with a high-molecular-weight grade does not support a low-molecular-weight stick, and a beverage study does not support a tablet. The label can change too. If the artwork names a molecular-weight grade, the claim has to be supported by the batch COA and by the method behind it. If the label says only “sodium hyaluronate”, the grade is still a specification term, and the buyer should be able to trace which grade the lot was released against. The high versus low comparison narrows the decision to the two ends of the range. Commercial terms move with the grade as well: a low-molecular-weight grade may be a separate production run with its own lead time and pack. The ordering page covers the pack and lead-time questions, and the stability page covers the study that a grade change triggers. ## Writing the grade into the specification A grade line needs a number, a method and a source route. “High molecular weight” alone is not a specification. A workable line reads: sodium hyaluronate ≥91.0% by HPLC; glucuronic acid ≥44.0% on the dried basis; molecular weight 1.0–1.5 MDa by SEC-MALLS; protein ≤0.1%; loss on drying ≤10.0%; pH 6.0–7.5 in 1% solution; ≥95% through 80 mesh; heavy metals and microbiology to the listed limits; source route declared. For a low-molecular-weight grade, replace the range and keep the rest of the structure. The label name is a separate decision. The ingredient is sodium hyaluronate, and a molecular-weight description is a specification or a claim, not a required part of the ingredient name in the EU, US or UK. If the brand wants the grade on the front of the pack, the regulatory team should confirm the wording for the destination market and the COA should be able to support it. The identity page shows how the molecular-weight line fits the rest of the identity file, and the catalog specification is on the product page. ### 02.1 High vs low molecular weight hyaluronic acid: viscosity, dose and the label URL: https://nutrition.rainwoodbio.com/products/specialty/hyaluronic-acid/grades/high-vs-low-molecular-weight/ Reviewed: 2026-11-19 High and low molecular weight sodium hyaluronate share the same CAS number 9067-32-7 and the same repeat unit, but they are different specifications. At equal solids the high grade is more viscous; the low grade allows more solids at a workable thickness. The choice is settled by the dosage form and the label, not by a general preference. In one lineHigh and low molecular weight sodium hyaluronate share a CAS number but not a viscosity, a formulation or a label rationale; the grade is a specification decision. ## What “high” and “low” actually measure Molecular weight describes the length of the polysaccharide chain, and a batch is always a distribution rather than one chain length. The catalog grade on this page is 1.0–1.5 MDa, which is a high-molecular-weight band. A low-molecular-weight grade is typically below 0.1 MDa, with a medium band between the two. Those bands are working descriptions, not a legal classification: a supplier’s “high” may start at a different point, and the figure is only comparable when the method is named. The assay does not measure the band. A high and a low grade can both report sodium hyaluronate ≥91.0% and glucuronic acid ≥44.0% while behaving differently in water, because the assay counts the polysaccharide mass and the chain length sets the hydrodynamic volume. That is why the certificate needs a molecular-weight result and method beside the assay, not instead of it. High and low molecular weight sodium hyaluronate at a glance | Attribute | High molecular weight | Low molecular weight | Working band | ≥1.0 MDa; catalog 1.0–1.5 MDa | <0.1 MDa | Viscosity at equal solids | Higher | Lower | Solids at a workable viscosity | Lower | Higher | Dissolution | Slower; prone to lumps | Faster; easier to clear | Usual format | Capsules, tablets, low-solids sticks | Higher-solids drinks and sachets ## Viscosity: the same concentration is not the same solution At the same concentration, the high-molecular-weight chain occupies more hydrodynamic volume and gives a thicker solution. The low-molecular-weight chain occupies less volume, so more of it can be dissolved before the solution becomes difficult to mix, fill or drink. This is the practical trade: the high grade gives thickness with less powder, and the low grade gives a higher solids load without thickness. Viscosity is not a fixed property of the grade. It depends on concentration, temperature, shear rate and the measurement system. A figure quoted without those conditions cannot be compared with another supplier’s figure or with a previous lot. If viscosity is a release parameter, write it into the specification with the concentration, temperature and spindle or shear rate, and measure it on the same equipment each time. Dissolution follows the same physics. A high-molecular-weight powder wets slowly and can form a gel layer around a lump, which slows water penetration further. A low-molecular-weight powder wets and dissolves faster, which is why it is easier to use in a small sachet or a clear drink. The 80 mesh particle size helps dispersion, but it does not change the chain length or the final viscosity. ## Dose: the amount that fits the format In this document, dose means the amount of sodium hyaluronate declared per serving, not a therapeutic recommendation. The amount is a formulation choice, and the grade decides how much room the formula has. A high-molecular-weight grade can build a thick solution at a low amount, which suits a small stick; a low-molecular-weight grade can carry a higher amount in the same volume without becoming unpourable. The capsule and the stick have different constraints. A capsule is a fixed volume of powder, so the grade affects flow and fill weight more than viscosity; a stick is a dry blend that becomes a solution in the consumer’s glass, so the grade affects how quickly it disperses and how thick the drink becomes. A beverage adds clarity and solids to the same decision: a high-molecular-weight grade at a low amount can give a light body, while a low-molecular-weight grade at a higher amount keeps the drink workable. None of this is a health claim. The dose question is about how much material fits in the unit the customer will use, and how the powder behaves when water is added. ## The label: ingredient name and the grade claim The ingredient name is sodium hyaluronate. “High molecular weight” and “low molecular weight” are specification terms or claims, not a required part of the ingredient name in the EU, the US or the UK. If the artwork carries a grade claim, the batch COA has to support it with a number and a method, and the claim has to be true for the lot on the shelf, not only for the development sample. The label rules differ by market. In the EU and the UK, the ingredient list and the amount per portion are the core particulars, and a grade claim is a commercial claim that must not mislead. In the US, a grade statement can sit alongside a structure/function claim only if it is truthful and substantiated; it cannot turn into a disease claim. The regulatory team should approve the exact wording before the artwork is ordered. The compliance page sets out the market checks. ## Does the grade change the regulatory file? The CAS number does not change, but the file can. A molecular-weight grade made by a different hydrolysis step is a different production process, and a novel-food determination or authorisation is tied to the process it assessed. The EU fermentation conclusion and the rooster comb extract authorisation are both route-specific; a new process step should be checked against the file rather than assumed to be covered. The UK has its own novel-food register, and Northern Ireland follows the EU route. Contaminant and microbiology limits do not usually change with molecular weight, but the specification does, and the stability study does. A grade change is a new specification, a new COA review and a new stability set in the intended matrix. The stability page covers the study design; the COA page covers the lines that change. ## When to choose which Choosing between high and low molecular weight sodium hyaluronate | Requirement | Choose high | Choose low | Thickness at low solids | Yes | No | High solids in a small volume | No | Yes | Fast dispersion in a stick | No | Yes | Low-solids capsule or tablet | Yes | Possible, but more powder | Clear, high-solids beverage | Difficult | Yes Choose the high grade when the formula needs thickness or a low amount of powder, and the process can wet and disperse a slow-hydrating polymer. Choose the low grade when the formula needs a higher solids load, faster dispersion or a clear drink at a workable thickness. If the format sits between the two, a medium band may be the better starting point, but it still needs its own molecular-weight range and method. A grade switch is not a drop-in substitution. Re-check the specification, the COA, the viscosity at the intended concentration, the stability in the finished pack and the label wording. The parent grade page compares all three bands, the identity page covers the molecular-weight evidence, and the catalog specification is on the product page. ### 03 Sodium hyaluronate is hygroscopic; moisture and heat decide the shelf life URL: https://nutrition.rainwoodbio.com/products/specialty/hyaluronic-acid/stability/ Reviewed: 2026-11-19 Sodium hyaluronate is hygroscopic, and water plus heat shortens the chain. The dry powder is stable while it stays inside its ≤10.0% loss-on-drying limit; a solution is a different problem, where hydrolysis, pH and microbial growth act at once. The pack and the storage condition decide the shelf life, and the shelf life has to be supported by data on the commercial pack. In one lineThe dry powder is stable while it stays dry; moisture, heat and the pack decide how long the chain length and the assay survive. ## A hygroscopic powder and a moisture ceiling Sodium hyaluronate carries carboxylate groups and a sodium counter-ion along a hydrophilic chain, and it picks up water from the air. The water sits on the surface and between particles, and it changes the powder before it changes the assay: first the powder loses its flow, then it forms lumps that do not disperse in a blend, and finally the loss-on-drying result reaches the 10.0% ceiling. A lot released near the ceiling has little margin left in a humid filling room. The 10.0% limit is a ceiling, not a target. Water is not hyaluronate, so a wet lot carries less dry matter per kilogram and its ≥91.0% assay is being carried by a larger mass. The powder may still pass the assay on the dried basis while the as-is material is out of specification on moisture. That is why the moisture result belongs beside the assay on the certificate, not in a storage note at the end. The foil pouch is the moisture barrier, not the fiber drum. A torn liner, a poorly closed pouch or a drum opened in a humid room is the usual route by which a compliant lot leaves its specification in storage. The filling room humidity belongs in the handling instruction. ## Water is also the format problem In solution, water is not a bystander; it is a reactant. The glycosidic bonds in the chain can hydrolyse, and heat and extremes of pH accelerate the reaction. The visible result is a drop in viscosity and a fall in molecular weight, often before the assay moves far, because the assay counts mass while the chain is cut into shorter pieces. A solution that was thick at filling can be thin at the end of shelf life and still report a similar assay. pH is the second control. The catalog window is pH 6.0–7.5 in 1% solution, and a beverage or gel that drifts outside that window during processing is a different stability subject from the dry powder. Heat is the third: a pasteurisation step, a hot fill or a warm warehouse all add to the same hydrolysis. If a liquid format is planned, the study has to run in that matrix, with the preservative system and the package included. Microbial growth is the fourth. A solution with water activity high enough to support growth needs a preservative system or a process that achieves commercial sterility. A dry-powder micro result says nothing about a liquid format. ## What actually moves the result Factors that change sodium hyaluronate during storage and handling | Factor | Effect | Control | Moisture | Clumping, higher loss on drying, less dry matter | Foil liner, desiccant, closed transfer | Heat | Hydrolysis, lower viscosity and molecular weight | Controlled warehouse; short heat exposure | pH | Faster hydrolysis away from 6.0–7.5 | Buffer the formula; measure at 1% | Oxygen and radicals | Chain scission, colour drift | Minimise headspace; control metal ions | Light | Surface colour change in an open pack | Opaque pack; keep it closed | Metal ions | Complexation and colour change | Stainless contact surfaces; contaminant panel | Shear | Viscosity loss in a high-shear solution | Control mixing time and speed | Microbes | Growth in an aqueous format | Preservative or sterility; validated pack Moisture is the factor that unlocks the others. A dry powder held cool and closed is the easy case; a damp powder held warm is where colour, flow and molecular-weight problems appear together. Dry the pack first, then control temperature, then control oxygen and light. ## A stability protocol for the powder A useful study starts with at least three lots, including one at the low end of the assay range and one at the high end of the moisture range. Pack each lot in the commercial pack, not a laboratory bag: the 1 kg foil pouch and the 25 kg fiber drum with its liner are different moisture barriers and should be studied as they are sold. Store the packs at 25 °C/60% RH for long-term data, 30 °C/65% RH for an intermediate condition and 40 °C/75% RH for accelerated data. Test at 0, 3, 6, 9, 12 and 24 months for the long-term condition, with at least 0, 3 and 6 months accelerated. Add a transport simulation if the material will sit in an unheated container or cross a cold chain. Test appearance, sodium hyaluronate, glucuronic acid, molecular weight, loss on drying, pH, protein, the microbiological panel and pack integrity. Record net weight at each point. Set acceptance criteria before the first result, and read a result outside the criteria as a finding about the pack or the process, not as a reason to change the criteria. ## The formula and the pack In a capsule, the powder competes with the shell for water. A gelatin shell can donate or take up moisture, and a hygroscopic fill can make the capsule brittle or tacky over time; an HPMC shell behaves differently. The study should use the intended shell and fill weight, because a capsule study with a different shell does not answer the question. In a tablet, binders and lubricants add their own moisture and compaction behaviour. In a powder stick, the foil laminate and the seal are the barrier; a poor seal fails faster than the same powder in a pouch. In a beverage, the bottle, the headspace oxygen and the preservative system join the list. The commercial pack is part of the specification: the 1 kg foil pouch suits a qualification or a small batch, and the 25 kg fiber drum with an inner liner suits production. If a desiccant or a nitrogen flush is required, it should be written into the order and the stability study, not assumed at the filling line. ## Assigning the shelf life The shelf life is the period supported by the stability data for the commercial pack, not a property of the molecule and not a number copied from another supplier’s certificate. A supplier can state a shelf life for the unopened pack; the buyer’s own data supports the finished product after filling. Both statements should name the storage condition and the pack. Write the storage statement in plain terms: keep the pack closed, store away from heat and moisture, and use the material within the stated period after opening. A reopened 25 kg drum is no longer the pack that was studied. The COA page explains the moisture and assay lines the study follows, the ordering page covers the pack sizes, and the compliance page covers the storage statement on the label. The loss-on-drying entry defines the test, and the microbiology method note covers the panel. ### 04 Hyaluronic acid: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/specialty/hyaluronic-acid/moq/ Reviewed: 2026-11-19 The minimum order for this grade is 1 kg, supplied in a foil pouch drawn from a released lot. Production quantities ship in 25 kg fiber drums, and the standard lead time is 1–7 days. A quotation needs the grade, quantity, pack, destination, documents and tests, because the offer and the route follow those six details. In one lineOne kilogram drawn from a released lot is the qualification unit; the grade, the pack and the destination shape the quotation. ## Why the minimum is 1 kg The 1 kg minimum is not a retail pack and not a marketing sample. It is the smallest quantity that can be drawn from a released production lot, carry that lot’s COA and retained sample, and still give a formulator enough material for a bench trial, a small pilot batch or a stability set. The same lot can then be scaled to the 25 kg drum, so the sample and the production material share a specification and a certificate lineage. A smaller split would either come from a different lot or require a separate release, and both weaken the comparison. The buyer would qualify one lot and receive another. The 1 kg unit keeps the qualification meaningful: the powder tested, the COA reviewed and the drum ordered can be traced to the same production record. The minimum is also a handling unit. A foil pouch is easy to store, reseal and protect from moisture, and it is small enough to use within a short trial. A 25 kg drum is a production unit, not a sampling unit, and it should be ordered once the grade and the pack have been fixed. ## The two standard packs Standard packs for sodium hyaluronate | Pack | Net content | Barrier | Typical use | Foil pouch | 1 kg | Foil laminate; resealable | Qualification, pilot batch, sample | Fiber drum with inner liner | 25 kg | Inner liner is the moisture barrier | Production | Desiccant or nitrogen flush | As agreed | Added to the chosen pack | Humid destination or long storage The fiber drum is structural, not a moisture barrier. The liner does the protecting, and a torn or poorly closed liner is the usual route by which a dry powder picks up water in storage. If the destination is humid or the material will be held for a long period, a desiccant or a nitrogen flush can be agreed as part of the pack; it should be written into the order and the stability study rather than added at the filling line. The pack label should carry the product name, the grade, the lot code, the net content, the storage statement and the certificate reference. The lot code on the pack has to match the COA and the retained sample; a pack without that link is difficult to release and impossible to investigate. ## Lead time and the order clock The standard lead time for a stock grade is 1–7 days. The clock starts when the order, the specification and the shipping details are confirmed, not when the first inquiry arrives. A purchase order that names a different grade, a different pack or a missing destination restarts the confirmation step. A low-molecular-weight grade, a granulated grade, a custom particle size or an additional test can add time because it is a separate production or laboratory step. Document legalisation, a customer-specific COA format or a third-party test also sits outside the standard 1–7 days. The quotation should state which parts are stock and which are made to order, so the buyer can plan the launch against the real route. Transit time is separate from lead time. The quotation should name the Incoterm, the port or airport and the destination country, because the documents and the route change with each. A 1–7 day lead time from the factory does not mean a 1–7 day delivery to the customer’s door. ## Six details a quotation needs What to send with a sodium hyaluronate quotation request | Detail | What to state | Product and grade | Sodium hyaluronate, molecular-weight band and source route | Quantity | 1 kg, 25 kg or the planned annual volume | Pack | Foil pouch, fiber drum, desiccant or nitrogen flush | Destination | Country, port or airport, and the Incoterm | Documents | COA, TDS, source statement and any declaration required | Tests and label | Additional tests, specification limits and label language Each line changes the offer. A request that names only “hyaluronic acid” leaves the grade, the pack and the destination open, and the reply has to be a question rather than a quotation. A request that names all six can be answered with a specific lot, a specific pack and a document list. ## Samples and the qualification batch A 1 kg pouch can serve as the sample when it is drawn from a released lot and accompanied by that lot’s COA. The sample should be tested in the buyer’s own matrix: the capsule shell, the stick laminate or the beverage base can change the answer, and a sample that performs on the bench may still fail in the finished pack. Record the lot code and keep a retained portion for comparison with the scale-up drum. A sample from a different lot, or a “representative sample” with no lot code, does not answer the scale-up question. The value of the 1 kg unit is the traceability, not the size. If the project needs a larger qualification batch, the next step is a 25 kg drum from the same grade, with the sample and the drum compared on the same specification. ## Terms that belong in the order The order should incorporate the specification by reference, name the pack and the quantity, and require a batch COA with the lot code. It should also state the storage statement, the shelf life for the unopened pack, the documents to be supplied and the acceptance procedure for a non-conforming lot. A quality agreement is the right place for the retained-sample period, the change-notification clause and the audit terms. Commercial terms are confirmed in the quotation, not on this page. The buyer should check the Incoterm, the named place, the document set and the route before the order is placed. The COA page explains the certificate the order should require, the stability page covers the storage statement, and the compliance page lists the market documents. The catalog specification is on the product page, and the quality page describes the release workflow. ### 05 Where hyaluronic acid is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/specialty/hyaluronic-acid/compliance/ Reviewed: 2026-11-19 Food-grade sodium hyaluronate is a supplement ingredient in the EU, the US and the UK, but permission is not one switch. The source route, the novel-food position, the contaminant ceilings, the label and the claim are five separate checks that the file must answer for the destination. In one lineThe source route, the novel-food position, the contaminant ceiling, the label and the claim are five separate checks, and each market answers them in its own instrument. ## Five checks, one file The checks are not interchangeable. A lot can meet a contaminant limit and still carry a forbidden label; a product can be lawful in one market and not another because the source or novel-food history differs. The operator placing the supplement on the market owns the assessment; the certificate is evidence, not a substitute. This is a sourcing reference, not legal advice. ## European Union Directive 2002/46/EC harmonises food supplements and sets a positive list of vitamins and minerals and their permitted forms. Sodium hyaluronate is neither, so Annex II does not apply; it falls under general food law and the supplement labelling particulars, and the operator must still show the ingredient is safe and lawfully used. The novel-food question turns on the source and the process. In a 2023 Article 4 consultation under Regulation (EU) 2015/2283, sodium hyaluronate produced by fermentation with a non-genetically modified Streptococcus equi subsp. zooepidemicus strain was determined not to be a novel food for food supplements. The conclusion is specific to that process and use; another strain or route needs its own check. Animal tissue is separate: rooster comb extract has its own authorisation under Commission Implementing Decision 2013/705/EU, with a 60–80% hyaluronic acid specification. Contaminants are governed by Regulation (EU) 2023/915. For food supplements, the ceilings are lead 3.0 mg/kg, cadmium 1.0 mg/kg and mercury 0.10 mg/kg. There is no harmonised EU maximum for arsenic, so that limit is buyer-set. Labelling follows Regulation (EU) No 1169/2011 and the supplement particulars; claims follow Regulation (EC) No 1924/2006, and as of this review the EU register has no authorised claim for sodium hyaluronate. ## United States In the US, sodium hyaluronate is sold in dietary supplements under DSHEA. FDA does not approve supplements or ingredients before sale, but the product must be made under the dietary supplement cGMP in 21 CFR 111, carry a Supplement Facts panel and meet the adverse-event reporting rules. An NDI notification, or another documented basis, belongs in the file. The DSHEA drug-exclusion question deserves its own line. Hyaluronic acid has an FDA-approved drug history, and an article first approved as a drug is excluded from the dietary ingredient definition unless it was marketed as a supplement before that approval. The brand’s regulatory team should document the route it relies on; a GRAS conclusion for a food use does not settle the supplement route. Structure/function claims are allowed if truthful, not misleading, substantiated and accompanied by the disclaimer. A claim that names a disease is a drug claim and is not allowed. California’s Proposition 65 adds its own lead threshold, so a product that meets the federal framework can still need a warning. ## United Kingdom Great Britain has its own novel-food regime, and the 2023 EU determination is not an automatic GB decision. The FSA register should be checked for the specific source and process. Northern Ireland applies EU novel-food rules under the Windsor Framework, so the two UK markets can answer differently. Food supplements in England are governed by the Food Supplements (England) Regulations 2003, with equivalents in Scotland, Wales and Northern Ireland. Labelling follows assimilated food information rules; contaminants and claims follow retained GB law. As of this review, there is no authorised GB claim for sodium hyaluronate, and the GB contaminant ceilings should be checked in the current text. ## The contaminant and source limits Contaminant and source checks by market · food supplements | Check | EU | US | UK | Lead | 3.0 mg/kg | No federal limit; state law may apply | 3.0 mg/kg in GB limits; check text | Cadmium | 1.0 mg/kg | No federal supplement limit | 1.0 mg/kg in GB limits; check text | Mercury | 0.10 mg/kg | No federal supplement limit | 0.10 mg/kg in GB limits; check text | Arsenic | No harmonised limit; buyer specification | No federal limit | No harmonised limit; buyer specification | Microbiology | Buyer specification; HACCP-based controls | cGMP; buyer specification | Buyer specification; food safety controls | Source and novel food | Fermentation determination; animal route separate | DSHEA basis and drug-exclusion check | FSA register; NI follows EU The catalog limits are Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg. Those figures sit at or inside the EU and GB ceilings for lead, cadmium and mercury; the arsenic line is buyer-set. A certificate that reports only “conforms” does not let the buyer compare the lot with the regulation; ask for individual results. ## Where the claim boundary sits No market allows a claim that names a disease or its course. The EU and UK allow only claims on the authorised register, which has no sodium hyaluronate entry as of this review. The US allows a structure/function claim with the disclaimer if it is truthful and substantiated, but not a disease claim. A statement about a body system is still a claim. The label should describe the ingredient, the amount per portion and the source. It should not borrow a claim from another ingredient or market; a wording acceptable in the US is not automatically acceptable in the EU. This page makes no health claim. ## The document pack Documents a sodium hyaluronate file should contain | Document | What it shows | When it is needed | Batch COA | Assay, glucuronic acid, molecular weight, moisture, contaminants, micro | Every lot | Specification / TDS | The release ranges and the methods | Every supplier qualification | Source and route statement | Fermentation or animal tissue; production organism or tissue | Every lot, all markets | Novel-food determination | The Article 4 conclusion or authorisation for the route | EU and UK files | Contaminant results | Individual lead, arsenic, cadmium and mercury figures | Every lot | Microbiology results | APC, yeast and mould, E. coli and Salmonella | Every lot | Label artwork and claim file | Ingredient name, amount, source and claim support | Before the first print run | GMP or HACCP certificate | The manufacturing control system | Supplier qualification; audit | Certificate of origin | Country of manufacture and export | Import and customs ## Before the first shipment - Name the source route on the COA, TDS and label; “hyaluronic acid” cannot stand for either route. - Record the novel-food position for the destination: EU determination, GB register or NI route. - Compare individual heavy-metal results with the market ceiling, not only with “conforms”. - Check the ingredient name and the amount per portion against the destination label rules. - Check the claim wording against the EU/UK register or the US structure/function rules. - Confirm the US dietary-ingredient basis and the drug-exclusion question with the brand’s regulatory team. - Keep a retained sample tied by lot code to the certificate and the drum. The market notes are on the EU, US and UK regulatory pages. Batch lines are explained on the COA page, source and identity on the identity page, and pack and lead time on the ordering page. The catalog specification is on the product page. ### 06 How we prove a sodium hyaluronate lot is hyaluronan URL: https://nutrition.rainwoodbio.com/products/specialty/hyaluronic-acid/identity/ Reviewed: 2026-11-19 A sodium hyaluronate (CAS 9067-32-7) lot is hyaluronan when four independent lines agree: the source and salt, the glucuronic acid ratio, the HPLC and UV profile, and the molecular weight. The ≥91.0% assay is one line, not the conclusion. A certificate can pass the assay and still describe a diluted powder, another glycosaminoglycan or a different chain length. In one lineA sodium hyaluronate lot is hyaluronan only when the source, the glucuronic acid ratio, the chromatographic profile and the molecular weight agree. ## The four layers of identity Identity is a conclusion built from evidence with different failure modes. The source declaration can be true while the powder is diluted; the assay can pass while the chain length is wrong; the molecular weight can be in range while the material is another glycosaminoglycan. Four identity layers for sodium hyaluronate | Layer | Evidence | Question it answers | Source and salt | Fermentation or animal tissue; sodium salt; production organism or tissue | Is the material from the route and salt named? | Building blocks | Sodium hyaluronate assay and glucuronic acid result on stated bases | Is the polysaccharide present at the declared content? | Instrumental profile | HPLC with UV detection; FTIR fingerprint | Is the principal component hyaluronan, and what else is visible? | Chain and residues | Molecular weight by SEC-MALLS or viscometry; protein, nucleic acid, moisture | Is the chain the declared length, and is it clean enough? The layers are not interchangeable; the file is complete only when the four agree. ## The glucuronic acid ratio and the residues Hyaluronan is a linear chain of repeating disaccharides, each built from D-glucuronic acid and N-acetyl-D-glucosamine. In the sodium salt, the repeat unit has a formula mass of about 401 g/mol and glucuronic acid contributes about 43.9% of it. That gives a ratio to test: on the same basis, pure sodium hyaluronate should carry close to 0.44 g of glucuronic acid per gram of polysaccharide. A result well below that points to dilution or another polymer; a result above it sends the reviewer back to the method. The ratio is only as good as the two assays. Sodium hyaluronate is reported by HPLC, glucuronic acid by UV or colorimetry, and the two may sit on different moisture bases. The certificate should print the basis beside each figure; 91.0% as sold and 44.0% on the dried polysaccharide can agree, but the same two numbers on one basis cannot both be right as mass fractions. Protein and nucleic acid are the residue side of identity. Protein is capped at ≤0.1%; it is residual fermentation or tissue material, it absorbs at 280 nm and it is not hyaluronan. Nucleic acid absorbs at 260 nm and comes from the production organism. A clean UV scan at both wavelengths is stronger than either figure alone. The salt form — sodium, potassium or the free acid — belongs in the same block. ## HPLC, UV and why XRD is not the identity test Hyaluronan is amorphous, so X-ray diffraction is not the identity test; an amorphous halo shows only that the powder is not crystalline. The useful pair is HPLC with UV detection and FTIR. HPLC, typically size-exclusion, separates the polysaccharide by size, and UV at the low end picks up the carboxylate chromophore; the report should name the column, mobile phase, wavelength and standard. UV at 260 and 280 nm adds the nucleic acid and protein check. FTIR gives the carboxylate, amide and glycosidic bands; against a reference on the same instrument it is a practical identity check and a screen for another glycosaminoglycan, but not a quantitation. The HPLC method note and the FTIR method note describe the instruments; the COA page shows where the results sit on the certificate. ## Molecular weight and the chain distribution The catalog range is 1.0–1.5 MDa, an average for the grade. A batch can sit anywhere in that window, but the distribution around the average can differ. SEC-MALLS reports a weight-average and a polydispersity; viscometry reports an average through the Mark–Houwink relationship. The two are not interchangeable, and the certificate should name the one it used. A low-molecular-weight lot cannot be sold as a high-molecular-weight grade without blending with high-molecular-weight material, and the blend shows as a broad or bimodal distribution. A high-molecular-weight lot can be degraded to a lower grade, but that is a new specification. The number and method belong on the COA; the grade belongs on the label only when the claim is supported. ## The adulteration routes to test for How a sodium hyaluronate lot can pass one test and fail identity | Route | What it does to the certificate | How to catch it | Another glycosaminoglycan | Chondroitin, dermatan or heparan shares the uronic acid building block | HPLC profile, FTIR, protein and molecular weight together | Low content | Maltodextrin, sugar or salt adds mass and lowers the assay | Glucuronic acid ratio, loss on drying, ash or conductivity | Salt substitution | Potassium or another counter-ion changes the mass and the label name | ICP-OES or ion chromatography; pH check | Wrong molecular weight | A low grade is sold as high, or a degraded lot as normal | SEC-MALLS distribution; viscometry with method | Wrong source | Animal tissue is sold as fermentation, or the reverse | Source declaration; nucleic acid and protein profile; audit No single route is caught by a single test. The practical screen is the combination: source declaration, sodium hyaluronate and glucuronic acid on stated bases, HPLC with UV, FTIR, molecular weight and the residue panel. Run that screen before the lot is accepted, whatever the commercial terms. ## Writing identity into the specification Write the identity block so a laboratory can reproduce every line. It needs the source route, the salt form, the sodium hyaluronate method and basis, the glucuronic acid method and basis, the HPLC and FTIR identity tests, the molecular-weight range and method, protein, nucleic acid, loss on drying, pH, particle size and the contaminant panel. A workable line reads: sodium hyaluronate ≥91.0% by HPLC on the material as sold; glucuronic acid ≥44.0% on the dried basis; identification by HPLC with UV detection and FTIR against a reference; molecular weight 1.0–1.5 MDa by SEC-MALLS; protein ≤0.1%; nucleic acid result reported; loss on drying ≤10.0%; pH 6.0–7.5 in 1% solution; ≥95% through 80 mesh; heavy metals and microbiology to the listed limits; source route declared. Replace the molecular-weight range and method for a low-molecular-weight grade. ## Five questions for a sodium hyaluronate supplier - Which source route produced the lot, and which production organism or tissue is named in the file? - Are the sodium hyaluronate and glucuronic acid results reported on the same basis, and which methods produced them? - Which HPLC column, detector, standard and FTIR reference were used for identity, and can you send the chromatogram and spectrum? - What is the molecular-weight average and distribution for this lot, and which method produced them? - Has the lot been screened for other glycosaminoglycans, added salt or sugar, and a source that differs from the label? The answers belong beside the certificate, not in a separate sales sheet. The grade page explains the molecular-weight bands, the compliance page covers the source and market file, and the product page carries the catalog specification. ### 01 What the COA for lipase actually contains URL: https://nutrition.rainwoodbio.com/products/enzymes/lipase/coa/ Reviewed: 2026-11-19 The certificate for a lipase lot (CAS 9001-62-1) reports activity in LU per gram, the assay conditions behind that figure, appearance, pH, loss on drying, particle size, the heavy-metal panel and microbiology. Each line needs a method and a release limit, because a lipase number is not comparable until the substrate, the pH and the temperature are known. The values below are the catalog specification; the batch COA is the document that confirms a particular drum. In one lineThe certificate has to show the unit, the assay substrate, the release limit and the lot result; an activity figure without those four is not a specification. ## The certificate as a test report A lipase COA is a test report before it is a commercial document. For every parameter the reader needs three things: what was measured, which method produced the number, and the limit the lot was released against. A certificate that lists results without the method cannot be reproduced by a second laboratory, and a result that repeats the specification range is not a result at all. Release parameters · lipase ≥100,000 LU/g | Parameter | Method | Release limit | Lipase activity | Titrimetric, tributyrin emulsion, pH 7.0, 30 °C | ≥100,000 LU/g | Appearance | Visual | Off-white to light tan, free-flowing powder | pH (1% solution) | Potentiometry | 7.0–7.5 | Loss on drying | Gravimetric | ≤8.0% | Particle size | Sieve analysis | ≥95% through 40 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤10,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent Two rows deserve a second look. The activity row should carry the unit definition, not only the number, because LU is an assay result rather than a mass. The microbiology row should name the tests and the sample size; “absent” without a method is a word, not a finding. ## What the LU figure measures One LU is the amount of enzyme that releases one micromole of titratable butyric acid per minute from a tributyrin emulsion at pH 7.0 and 30 °C. That is a rate, not a weight: it says how fast the preparation splits the substrate under those conditions, not how much enzyme protein the powder contains. A preparation at 100,000 LU/g carries 100 LU per milligram, and the same enzyme diluted on a carrier can sit at a tenth of that figure without any change in the molecule. The activity basis matters as much as the number. An as-is figure includes the water measured by loss on drying; a dried-basis figure does not. With a loss on drying of up to 8.0%, the two bases can differ by about 8%, which is a material difference when two certificates are compared. The certificate should print the basis and the loss-on-drying result on the same page. Specific activity, expressed as LU per milligram of protein, is a different and often more revealing number. It is not usually printed on a food-enzyme certificate, but it is the number to request when two concentrates are compared, because it separates more enzyme from more carrier. ## Release limit versus batch result The release limit is the acceptance boundary for the lot; the batch result is what the laboratory measured. Both belong on the page, in separate columns, with the method beside them. A result column filled with the specification range is a copy of the gate, not evidence that the gate was passed. Activity is a one-sided limit. One lot can sit just above the limit and another well above it; both pass, but the difference changes how much powder goes into a blend and how uniform that blend will be. Loss on drying, heavy metals and microbiology are ceilings; pH and particle size are windows, and a result at either edge deserves the raw data. “Conforms” is a conclusion, and the reader should be able to reach it from the numbers. When an activity result sits close to the limit, ask for the titration record: sample weight, blank, titre, calculation and the standard used. That record is what separates a measured result from a typed one. ## What moves between batches Activity moves with the fermentation: the Candida rugosa strain, the medium, the induction strategy, the harvest point, the recovery yield and the drying step all shift the titre. Standardisation to 100,000 LU/g is itself a blending step, in which a higher-activity concentrate is cut with carrier until the label is met. The activity can therefore sit exactly on the label while protein content, colour, loss on drying and side activities move from lot to lot. Colour and odour are less quantitative and often more revealing. A darker tan or a stronger fermentation note can follow a longer fermentation or a warmer drying step while the activity assay still passes. Loss on drying follows the dryer and the packing; particle size follows the mill and the sieve. None of these is captured by the activity figure alone. A trend across lots says more than a single result near an edge. Loss on drying climbing, activity sitting at the floor and colour darkening together describe a process drifting, even when every individual certificate passes. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a disputed activity result or a method mismatch between supplier and customer. The useful panel is not a full repeat: activity by the customer's method, protein content, SDS-PAGE, microbiology and the heavy-metal panel, all on one submitted sample. An outside LU number is only comparable if the laboratory used the same substrate, pH, temperature and titration. Change the substrate and the number changes for reasons that have nothing to do with the lot. Ask the laboratory to report the assay conditions and its detection or reporting limits alongside the result. For a dispute, give the referee the retained sample, the supplier's certificate and the specification, and ask both laboratories for the raw titration, the sample weight, the blank and the standard. Chain of custody matters: the sample tested should be the sample retained, and the lot code should appear on all three documents. ## What to compare between suppliers Put six lines side by side: unit definition and assay conditions; activity result and basis; species and strain; carrier or diluent; loss on drying and microbiology; SDS and allergen statement. Two quotations that both say 100,000 LU/g can describe two different assays, two different bases and two different preparations. The unit is the first line to compare, not the last. The specification on the lipase product page fixes the catalog position; the grade page explains what a dilution changes, the identity page sets out the activity and protein evidence, and the LU versus FIP note explains why a second unit cannot be read across. The release workflow behind the certificate is described on the quality page. ### 02 100,000 LU/g or a dilution: choosing a lipase grade URL: https://nutrition.rainwoodbio.com/products/enzymes/lipase/grades/ Reviewed: 2026-11-19 Lipase is supplied as a 100,000 LU/g powder, as a lower-activity dilution on a declared carrier, and as a granulated powder. The grade changes the activity per gram, the weight the formula has to carry, the dust in the room and the words on the label; it does not change the enzyme. The highest number on the sheet is not automatically the right grade. In one lineThe grade is chosen by the activity the process needs and the weight the formula can carry, not by the highest number on the sheet. ## Why activity concentration is a grade decision Three variables sit behind one grade name: activity per gram, physical form and the carrier. A 100,000 LU/g powder is a concentrate, so a small inclusion carries the activity the formula needs. A dilution spreads the same enzyme over more carrier, which makes a small dose easier to weigh and disperse but adds mass that has to be declared. Granulation changes flow and dust without changing the activity definition. The trade-off is arithmetic. If a formula needs a fixed number of LU per serving, a lower-activity grade needs proportionally more powder. That extra powder has to fit the capsule, disperse in the stick pack or pass through the blender without segregating. The grade decision is therefore a mass-balance decision before it is a purchasing decision. ## The grades side by side Lipase grades · what changes in the drum | Grade | Activity | What it is | Fits | Watch | Powder, 40 mesh | ≥100,000 LU/g | Concentrate; carrier as declared on the COA | Capsules, tablets and blends with a small inclusion | Dust, static and weighing accuracy at small doses | Dilution | Agreed in the specification | Base powder on a declared carrier | Stick packs, sachets and blends that need more mass | Carrier identity and amount; blend uniformity | Granulated | Same definition as the base | Agglomerated powder | Tablets, sachets and rooms where dust is the problem | Heat and moisture added by the granulation step The table is deliberately short. A lipase grade is not a different enzyme, a different source or a different unit; it is the same activity definition presented at a different concentration and particle structure. Any offer that changes the source or the unit is a different material, not a grade. ## What changes in the drum The catalog powder passes 40 mesh, which is about 425 µm. That is a fine, free-flowing powder with a pale colour and a tendency to raise dust when poured. The dust is not only a housekeeping issue: enzyme powders are respiratory sensitisers, so a grade that generates less airborne dust can be worth more to the room than a higher activity figure is to the formula. Granulation improves flow and reduces dust, but it adds a process. The binder, the water or solvent, the drying temperature and the milling after granulation all have to be declared, and the activity has to be measured after the step rather than assumed from the base powder. A granulated grade with good flow and a measurable activity loss is a worse grade than the powder it came from. A dilution changes the particle-size distribution as well as the activity. The carrier may be finer or coarser than the enzyme powder, and the two can separate in a blender or a hopper. Ask for the particle size of the blend, not only of the enzyme, and check the uniformity of a trial blend rather than the assay of a single scoop. ## What changes in the finished product For capsules, the fill weight is the limit. The 100,000 LU/g grade lets a small capsule carry the target activity without a large plug of carrier. A dilution is the better choice when the activity target is low and the capsule is large, because the extra mass improves weighing accuracy and fill uniformity. For stick packs and sachets, dispersion and mouthfeel matter as much as activity. A dilution can reduce the sticky, clumping behaviour of a concentrated enzyme powder and make the single-serve pack easier to empty. The carrier then appears in the ingredient list, and a project that has promised a carrier-free label cannot use that grade. For tablets, flow and compression decide. A granulated grade can run where a fine powder would bridge in the hopper, but the compression step and any aqueous coating add heat and water that the activity may not survive. The grade choice and the process choice are one decision, not two; the stability page sets out where the losses occur. For an enzyme blend, the grade has to match the other components. A lipase at 100,000 LU/g and a protease at a different activity per gram are weighed in different amounts; switching the lipase to a dilution changes the blend ratio and may change the uniformity of the minor component. ## What to put in the specification - “Lipase (triacylglycerol lipase, EC 3.1.1.3) from Candida rugosa, ≥100,000 LU/g.” - “One LU = 1 µmol titratable butyric acid released per minute from tributyrin at pH 7.0 and 30 °C; conditions printed on the COA.” - “Activity basis as-is; loss on drying ≤8.0%.” - “Carrier identity and inclusion declared on the COA; the concentrate and the dilution are separate specifications.” - “Particle size ≥95% through 40 mesh; granulated grade to the agreed size.” - “Activity measured after granulation, not only on the base powder.” A line that reads only “lipase 100,000 LU/g” leaves the assay, the carrier and the physical form open. The specification should be written so that a second laboratory could reproduce the number and a second blender could reproduce the blend. ## When not to change grade Do not dilute a grade whose label already declares 100,000 LU/g; the label and the certificate would then describe different materials. Do not granulate a powder that already flows, because the added heat and moisture are a real activity risk for no gain. Do not choose a dilution to save weighing time if the carrier is excluded by the label or by the customer's specification. Do not chase the highest activity either. A very high-activity powder can be difficult to weigh accurately at a small inclusion, and the dust load in the room rises with the concentration. The right grade is the one that delivers the activity with the least process risk, not the one with the largest number on the front of the specification. The catalog position is on the lipase product page. The release parameters are on the COA page, the unit definitions are compared on the LU versus FIP page, and the minimum order and packing options are on the MOQ page. ### 02.1 LU vs FIP: what a lipase unit actually means URL: https://nutrition.rainwoodbio.com/products/enzymes/lipase/grades/lu-vs-fip/ Reviewed: 2026-11-19 LU and FIP are both lipase activity units, but they come from different assays: LU is normally titrated on tributyrin at pH 7.0 and 30 °C, while FIP is titrated on olive oil at pH 9.0 and 37 °C. The numbers are not interchangeable, and no fixed factor converts one into the other. Only a side-by-side assay on the same lot can put the two units on the same page. In one lineLU and FIP are different assays before they are different numbers; without the substrate, pH and temperature, neither unit identifies a lipase. ## Two definitions LU and FIP · the assay behind each unit | Unit | Substrate | pH | Temperature | Definition | LU | Tributyrin emulsion | 7.0 | 30 °C | 1 µmol titratable butyric acid released per minute | FIP | Olive oil emulsion | 9.0 | 37 °C | 1 µmol (microequivalent) fatty acid released per minute | “U” or “IU” | Defined by the laboratory | Not fixed | Not fixed | No fixed meaning until the method is named LU is the unit used in the food-enzyme trade, and the tributyrin titration is its common form. FIP is the unit associated with the pharmacopoeial lipase method and with fungal lipase standards; the FIP method is tied to a standard preparation, which is why two laboratories using it can be compared. A bare “unit” on a specification is neither: it is a placeholder until the method is written down. ## Why the substrate changes the number Lipase acts at the interface between oil and water, not in a homogeneous solution. Tributyrin is a short-chain triglyceride and olive oil is a long-chain mixture; the two form different interfaces, with different droplet sizes and different accessibility to the enzyme's active site. The emulsifier, the homogenisation speed and the age of the emulsion all change the surface area the enzyme sees. The rest of the method moves the number too. pH 9.0 is well above the pH 7.0 used in the LU assay, and it changes both the charge on the protein and the ionisation of the fatty acid being titrated. Thirty-seven degrees is faster than thirty. A longer incubation can exhaust the emulsion or allow product inhibition. The same preparation can therefore give a respectable LU figure and a modest FIP figure, or the reverse, without anything changing in the drum. This is why a unit is a property of the assay as much as of the enzyme. The substrate, the pH, the temperature, the time, the detection and the standard are all part of the definition. Leave one out and the number floats. ## The conversion problem There is no general conversion factor between LU and FIP. A factor that works for one preparation, one pair of methods and one laboratory does not transfer to another, because the two assays respond differently to the same change in substrate, pH and temperature. A supplier may quote a factor, but it is a result of a particular comparison, not a property of the units. What changes when a lipase is measured by the other method | Variable | LU | FIP | Effect on the number | Substrate | Tributyrin | Olive oil | Different interface and chain length; not proportional | pH | 7.0 | 9.0 | Different activity and different titration endpoint | Temperature | 30 °C | 37 °C | Faster reaction at the higher temperature | Standard | Supplier method | Standard preparation | Different anchor for the unit If a customer needs FIP, assay the lot by FIP. A conversion printed on a certificate, without the raw data for both methods on the same lot, is not evidence; it is an assertion. The honest line is a result in the unit the customer's method produces, with the conditions attached. ## What belongs on the label and the specification The unit on a specification or a pack has to be defined, not just named. “Lipase ≥100,000 LU/g” is a complete statement only when the LU definition and the assay conditions sit beside it. “Lipase 100,000” without a unit is not a specification at all, and “100,000 LU/g equivalent to FIP” is a claim that needs data behind it. FIP and LU also carry different expectations. FIP is the language of pharmacopoeial and pharmaceutical work, where the method and the standard are part of the quality system. LU is the language of food-enzyme supply, where the customer's quality laboratory often runs its own titration. Neither is better; they answer different questions, and the market and the customer's method decide which one belongs in the contract. For EU, US and UK food-enzyme files, the activity statement is a technical description of the preparation. It is not a health claim, and a change of unit does not change the regulatory status of the material. The unit has to match the method used in the destination market's file, and the method has to be reproducible by the customer's laboratory. ## When to choose which Choosing the unit for a lipase specification | Situation | Unit to use | The customer's quality laboratory already runs a tributyrin titration at pH 7.0 | LU, with the conditions written into the specification | The customer's specification or pharmacopoeial method is olive oil at pH 9.0 | FIP, reported by the FIP method | Two lipases are blended and the ratio has to be fixed | One unit system for both components, never a mix | An existing label or contract already declares a unit | Keep that unit; do not switch silently | A new product with no legacy method | The method the contract laboratory runs, named in the specification The choice is usually made by the customer's method, not by the supplier's preference. A supplier who can report only the other unit should be asked for a lot-specific side-by-side result, not for a conversion factor. ## How to verify a conversion claim Ask for the same lot run by both methods, in the same laboratory, against the same standard, with replicates and the raw titration data. The report should name the substrate, the emulsifier, the pH, the temperature, the reaction time, the detection method and the standard. Without those, a conversion is a number about a method, not about the material. The catalog position is on the lipase product page; the grade options are on the grade page, the certificate lines are on the COA page, and the identity evidence is on the identity page. The assay conditions are also defined in the assay glossary entry. ### 03 Lipase activity falls with heat and moisture; the process decides the shelf life URL: https://nutrition.rainwoodbio.com/products/enzymes/lipase/stability/ Reviewed: 2026-11-19 Lipase is a protein, and heat and water change its shape in ways that do not reverse on cooling. A sealed, dry powder at a moderate temperature holds its activity for a long time; a water-based granulation, an aqueous coating, a warm drying step or a permeable pack can remove a large part of it before the shelf life begins. The process, not the molecule alone, decides how much activity reaches the consumer. In one lineA sealed, dry powder holds its activity; heat, water and the process step are what take it away. ## The dry powder In a dry powder, molecular mobility is low and the enzyme is largely inactive. The two variables that matter are temperature and water activity. Loss on drying is the number on the certificate, with a catalog limit of ≤8.0%, but water activity is the better predictor of stability: a powder that reads 7% moisture can still be safe if the water is tightly bound, and a powder at 5% can fail if it is stored in a humid room. Keep the powder sealed, cool and dry: a closed foil pouch with a desiccant, below about 25 °C and out of direct sunlight. Refrigeration is not required and brings a condensation risk; if a pack has been cold, let it reach room temperature before opening. Freezing is not a storage solution: a freeze-thaw cycle can aggregate the protein and reduce activity. If a sample must be frozen, freeze it once, keep it sealed and thaw it fully before assay. ## In solution Once the powder is dissolved, the enzyme becomes active and the clock starts. The preparation may contain residual proteases and other proteins from the fermentation, and those can attack the lipase itself. Activity in a dilute aqueous solution typically falls within hours at room temperature, faster at higher temperature and faster still if the solution is foamed or sheared. The catalog pH of 7.0–7.5 for a 1% solution is close to the working optimum for a Candida rugosa lipase. Moving away from that window, in either direction, reduces the rate and can also reduce stability. A buffer at the working pH is better than unbuffered water. A solution held for more than a short run needs its own preservation and stability data, because microbial growth is as much a risk as inactivation. If the process needs a liquid stage, prepare it shortly before use, keep it cool, avoid foaming, and measure the activity at the start and end of the run. ## What drives the loss Stability factors · what changes the activity | Factor | Effect | Control | Heat | Denaturation above the working range; loss is not recovered on cooling | Keep drying, granulation and coating temperatures low; measure after the step | Water | Mobility and hydrolysis; caking and microbial growth at high water activity | Sealed pack with desiccant; dry excipients; low-water granulation | pH | Activity and stability fall outside pH 7.0–7.5 | Buffer the liquid stage; check the finished matrix | Shear and foam | Interfacial denaturation at the air–liquid boundary | Low-shear mixing; avoid over-mixing; defoam gently | Metal ions and oxidants | Protein oxidation and aggregation | Check excipient quality; avoid incompatible minerals in the same phase | Carrier and reducing sugars | Browning and protein modification under heat and moisture | Choose a low-reducing-sugar carrier; keep the blend dry | Packaging | Moisture vapour and oxygen ingress | Foil or high-barrier laminate; sealed liner; desiccant where the pack allows The factors act together: a warm, humid granulation is more damaging than either condition alone, and a reducing sugar adds a third path when the protein reacts with it under heat and moisture. ## A stability protocol that answers the question A useful stability programme tests the material in the pack and the form in which it will be sold, not only the powder in a laboratory jar. Start with a retained sample of the lot, store it in the commercial pack at 25 °C/60% RH and at 30 °C/65% RH, and pull samples at 0, 1, 3, 6, 12 and 24 months. Assay activity, loss on drying and appearance at each point. Accelerated storage at 40 °C/75% RH is useful for screening a new formulation, but it is not a substitute for real-time data at the label condition. Enzyme inactivation is not a simple first-order reaction across a wide temperature range, so an Arrhenius extrapolation from a hot cabinet can overstate the shelf life. Use the accelerated result to rank formulations, and the real-time result to assign the shelf life. Test the finished form as well: the tablet, the stick pack or the blend, not only the powder. The additional excipients, the water activity of the mix and the compression step can each change the loss rate. The acceptance criterion should be the minimum activity at the end of the shelf life, not the release activity. ## Formulation and processing Granulation is the step most likely to damage the enzyme. If the lipase is added to the granulation water, it is in solution for the duration of the wet step and the drying step; the loss can be substantial. The safer route is to granulate the other components, dry them, and add the enzyme as a dry powder in the final blend. Dry binders and roller compaction generate less water exposure than a wet granulation, though the rolls can still get warm. Tableting adds pressure and local heat. Direct compression is usually gentler than a heavily worked wet granulation, but the die temperature and the dwell time still matter. Measure the activity in the finished tablets, not only in the blend, and compare it with the activity that went into the press. Aqueous film coating is another water source; if the tablet core contains the enzyme, a low-water or solvent-based system is easier on the activity. In a stick pack, the laminate barrier and the water activity of the powder decide the shelf life, because a single-serve pack cannot hold a desiccant sachet. ## Assigning the shelf life Shelf life is a property of the pack and the storage condition, not of the molecule. The assigned figure belongs on the TDS and should be supported by real-time data for the grade, the pack and the storage condition. Dry enzyme powders in sealed foil are commonly given shelf lives measured in years; a diluted or granulated grade, a stick pack or a warm-market pack can be shorter, and the customer's pack may be shorter again. State the storage condition with the number: a duration, a temperature and a pack condition are testable; “store in a cool, dry place” is not. State the activity at the end of the shelf life, not only at release. An overage used to meet the end-of-life figure is a formulation choice, not a stability result, and has to be declared and supported. The release parameters are on the COA page, the packaging and order details are on the MOQ page, the grade options are on the grade page, and the release workflow is described on the quality page. The catalog position is on the lipase product page. ### 04 Lipase: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/enzymes/lipase/moq/ Reviewed: 2026-11-19 The minimum order for lipase is 1 kg, supplied as a 1 kg foil pouch drawn from a released lot; 25 kg fiber drums are the scale pack. Lead time is 1–7 days for the catalog grade, and a quotation needs six details before it can be firm. A made-to-order dilution or granulation has its own minimum and its own lead time. In one lineOne kilogram from a released lot is the qualification unit; grade, pack and destination decide the rest of the order. ## Why the minimum is 1 kg The first kilogram is a qualification unit, not a production batch. It is enough to run an activity assay in your own laboratory, make a small blend, fill a short trial of capsules or stick packs and keep a retained sample. A smaller split would send less material and be less useful to test, because the sample would no longer represent a full pack from the lot. The pouch is drawn from a released lot and carries that lot's certificate. The 25 kg drum is the same material at production scale, not a different grade. Between the two there is no change in the specification; only the pack, the handling and the shipping weight change. A dilution or a granulation is made to order, so its minimum is set by the smallest blend the plant can make uniformly. That minimum is confirmed in the quotation rather than assumed from the 1 kg catalog figure. If the project needs a custom activity, ask early: the custom grade is the item with the longer clock. ## Packing The catalog packs are a 1 kg foil pouch and a 25 kg fiber drum. The pouch is the unit that travels by courier and suits a first order; the drum is the unit that suits a production run and a forklift. Both should be sealed; the drum should have a food-grade liner and carry a desiccant where the pack design allows it. The label on the pack should repeat the product name, the activity and unit, the lot code, the manufacture or release date, the storage condition and a reference to the SDS. The lot code on the pouch, the certificate and the retained sample should be the same string; if they are not, the certificate does not describe the pack on the dock. Enzyme powders are respiratory sensitisers. The pack should be opened under local exhaust ventilation or in a controlled weighing booth, and the empty pouch should be closed before it is discarded. The SDS gives the exposure controls and the spill procedure; the pack label is not a substitute for either. ## Lead time The catalog grade is quoted at 1–7 days after specification and order confirmation. The range covers the difference between a lot already released and one that needs to be drawn, packed and documented; it does not include the transit time, which depends on the destination and the mode. A custom dilution, a granulated grade or a non-standard pack adds time for the blending or granulation step, the activity assay and the release documentation. A destination that needs a legalised or market-specific document pack adds time again. Place the request with the intended use and the destination in the first message so that the lead time quoted includes the documents, not only the powder. If the order is tied to a production date, give the date and the latest acceptable delivery, not only the order date. A 1–7 day release window and a long transit are different risks, and the quotation should separate them. ## What a quotation needs Six details that change a lipase quotation | Detail | Why it changes the offer | Activity and unit | 100,000 LU/g, a dilution or a granulated grade; the unit and the assay must be named | Quantity and pack | 1 kg pouch, 25 kg drum or a multiple; the pack sets the handling and the shipping weight | Destination and Incoterm | Freight, export documents and the importer of record follow the destination | Intended use | Food enzyme, supplement blend or processing aid; the use drives the regulatory file and the SDS | Documents required | COA, TDS, SDS, allergen, GMO, origin or a customer-specific pack | Label and specification | The activity, unit and carrier wording that must appear on the pack and the certificate The six details are not a formality. An enquiry that gives only a product name and a quantity will receive a catalog offer, not a quotation for the material the project actually needs. The intended use matters most, because a food-enzyme use and a supplement-ingredient use call for different documents even when the powder is the same. ## Samples Samples are typically 100–500 g and are drawn from the lot they represent; the sample carries that lot's COA. A sample is not a separate production run and should not be taken as a guarantee of the next lot, but it is the right way to check solubility, colour, dust, flow and the activity assay in your own method before the first drum. Ask for the sample in the pack you intend to use, or at least in a sealed foil pouch. A sample in a screw-top jar can pick up moisture in transit and give a misleading activity or loss-on-drying result. Record the lot code and keep part of the sample as a retained reference. ## Terms to settle before the order - The specification, signed by both sides, including the unit definition and the assay conditions. - The COA acceptance criteria and the action to take if a result is disputed. - The shelf life remaining at shipment and the storage condition the customer will use. - The documents released with the lot and the documents supplied only on request. - The label wording, including the carrier and any claim the customer intends to make. - The reorder basis: same grade, same unit, same pack, same specification revision. These six terms prevent many of the disputes that arrive after the drum. A signed specification with a named unit is worth more than a long correspondence about an activity figure that was never defined. The catalog position is on the lipase product page; the release parameters are on the COA page, the grade options are on the grade page, and the storage and packing risks are on the stability page. The release workflow is described on the quality page. ### 05 Where lipase is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/enzymes/lipase/compliance/ Reviewed: 2026-11-19 Lipase from Candida rugosa is a food enzyme, not a food additive. In the EU and the UK the authorised list is still in transition; in the US the route is a GRAS conclusion, and the notice that covers this source is use-specific. The file has to show the source, the use, the limits and the label wording for each market, because permission, purity, labelling and claims are four different questions. In one linePermission, contaminant limits, label wording and claims are four separate checks, and each market answers them with a different instrument. ## Four checks, not one The first question is whether the enzyme may be used in the intended food process in that market. The second is whether the preparation meets the contaminant and microbiological limits that apply to the finished food. The third is how the material is described on the label, including the carrier. The fourth is what the brand says about it. Lipase is handled as a food enzyme, not as an additive, so the authorisation route, the labelling rules and the documents are different. The source organism and the production strain belong in the file as well: “lipase” describes an activity, not a production process, and two preparations with the same activity can come from different organisms. ## European Union Food enzymes fall under Regulation (EC) No 1332/2008. The regulation requires an enzyme to be included in the Union list before it is placed on the market or used in food, but the Union list has not yet been adopted. Article 24 provides that, until the Union list applies, national provisions on the placing on the market and use of food enzymes continue to apply in the Member States. As of November 2026 the list is still pending; check the current text before a launch. The Commission maintains a Register of food enzyme applications, and the file should show the entry that covers this enzyme and its intended use. EFSA evaluates the dossier, including the source organism, the production process, the use levels and the removal of the production organism. National rules differ, so the Member State of sale has to be named in the check, not only “the EU”. A supplier should not describe a C. rugosa lipase as “EU approved” while the Union list is pending; the accurate statement is that it is placed on the market under the applicable national provisions, with the register entry and application status in the file. ## United States Lipase from C. rugosa is not listed in 21 CFR Part 173 for this source. The Part 173 entry for a lipase, §173.140, covers an esterase-lipase from Mucor miehei, which is a different enzyme and a different production organism. The US route for the C. rugosa material is a GRAS conclusion. GRAS Notice 81, filed by Amano Enzyme in 2001, covers lipase from C. rugosa for use on fats and oils to produce fatty acids or glycerides at up to 1% of the weight of the fat or oil, and for the esterification of fatty acids to produce glycerides at up to 1% of the weight of the fatty acids. FDA responded that it had no questions. That response is not an approval, and the notice is use-specific: a use outside those conditions needs its own GRAS basis. For a dietary supplement, the brand needs a GRAS basis or a new dietary ingredient notification for its intended use. Labelling follows the processing-aid rule. Under 21 CFR 101.100(a)(3), a processing aid that has no technical effect in the finished food is exempt from ingredient declaration; an enzyme that remains active and functional in the finished food is not. The brand decides the label. ## United Kingdom Great Britain applies assimilated Regulation (EC) No 1332/2008. The FSA and FSS maintain a register of regulated-product authorisations, and the domestic list of food enzymes was not yet established at this review. Until initial authorisations are made, food enzymes under the assimilated regulation do not need approval before use. The 2025 reform changed how future authorisations take effect, not the status of existing enzymes. Northern Ireland follows the EU regime, so a GB check and an NI check are separate exercises. ## Limits and where they come from Contaminant and microbiological limits · catalog and EU food-supplement ceilings | Parameter | Catalog limit | Market note | Lead | ≤3 mg/kg | EU food supplements: 3.0 mg/kg as sold | Cadmium | ≤1 mg/kg | EU food supplements: 1.0 mg/kg as sold | Mercury | ≤0.1 mg/kg | EU food supplements: 0.10 mg/kg as sold | Arsenic | ≤2 mg/kg | No general EU maximum for this matrix; the specification sets the limit | Microbiology | APC ≤10,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | General food-safety duty; the customer specification may be tighter | Loss on drying | ≤8.0% | Quality parameter; it also sets the activity basis The EU ceilings apply to the food supplement as sold, not to the enzyme powder. The ingredient limit has to be set so that the finished product stays under the ceiling. The brand does that calculation; the COA is an input, not a substitute. ## What the label and the claim may say No disease-related claim is made for this material, and the technical pages describe the specification and the file, not a physiological effect. “Lipase activity ≥100,000 LU/g” is a statement about the preparation, not a health claim. A claim about the finished food belongs to the brand and must be authorised in the market where it is made: the EU health-claims regulation, the US supplement rules and the retained UK regime each set their own test. The enzyme file supports identity, activity and purity; it does not support a claim about what the finished product does to the body. ## The document pack - Specification with the unit definition and the assay conditions. - Batch COA with the lot result and the release limit on separate lines. - Technical data sheet with the activity, solubility, pH and packing. - Safety data sheet with the dust and exposure controls. - Allergen statement covering the enzyme source and the carrier. - GMO statement for the production organism and the raw materials. - Origin and production-strain record. - Carrier and composition statement. - Stability summary for the grade and the pack. ## Compliance checklist Checks before a lipase lot is released to a market | Check | Evidence | Market and intended use named | Regulatory basis memo for that use, not only for the substance | Source organism and strain documented | Origin record and production-strain statement | Enzyme status confirmed | EU register entry, US GRAS basis or UK register position, as applicable | Contaminants within the destination limit | Batch COA and, where needed, a third-party report | Carrier and allergen checked | Composition statement and label artwork | Label wording checked | Activity, unit, carrier and storage statement on the pack | Claims reviewed | Claim file owned by the brand, not by the supplier | Document pack complete | The nine documents listed above, in the version released with the lot The catalog position is on the lipase product page; the release parameters are on the COA page, the source and activity evidence is on the identity page, and the market frameworks are summarised in the EU, US and UK regulatory notes. The release workflow is described on the quality page. ### 06 How we prove a lipase lot has the declared activity URL: https://nutrition.rainwoodbio.com/products/enzymes/lipase/identity/ Reviewed: 2026-11-19 An enzyme has no crystal form or melting point to identify it by. Identity rests on the source and production record, the activity under a defined assay, the protein profile, and the absence of undeclared activity. A lipase figure alone is a rate, not an identity; unit and method must travel with it. In one lineActivity is the identity test for an enzyme, and it only means something when the unit, the substrate and the method travel with the number. ## Four layers of identity Identity evidence for a lipase lot | Layer | Evidence | What it catches | Source and production record | Species, strain, fermentation and recovery record, carrier | A different organism or a mislabelled source | Activity | LU/g by the declared method, with substrate, pH and temperature | Dilution, inactive material and method drift | Protein | Total protein, specific activity and SDS-PAGE profile | Carrier loading and a foreign protein | Adulteration screen | Side activities, loss on drying, ash and microbiology | Spiking with another enzyme, water or salt The layers are not alternatives: a source record without activity is a label, and an activity result without a source could belong to any lipase. ## What the LU means One LU is the amount of enzyme that releases one micromole of titratable butyric acid per minute from a tributyrin emulsion at pH 7.0 and 30 °C. The unit describes a rate under named conditions, not a mass and not a purity. A 100,000 LU/g powder therefore carries 100 LU per milligram, carrier and fermentation solids included. “LU” is not one international definition. The tributyrin assay is the common food-enzyme convention, but a supplier can define its own unit on another substrate or pH. The certificate has to print the conditions and the specification repeat them; “100,000 LU/g” alone is a number without a definition. The LU versus FIP page sets out the alternative. ## The activity assay The assay is a titration. A tributyrin emulsion is prepared at pH 7.0 and held at 30 °C; the enzyme is added, and the butyric acid released is titrated with sodium hydroxide to keep the pH constant. Base addition over the measured interval gives micromoles of acid per minute, divided by sample weight for LU/g. The details decide the result. The emulsion has to be uniform, because lipase acts at the oil–water interface and a coarse emulsion presents less surface. The sample must be weighed accurately, because the activity is high. A blank, a standard preparation and at least two replicates belong in the record. The assay is also the identity test, but only when the method transfers. A laboratory running olive oil at pH 9.0 and calling the result LU is not reproducing the certificate. If the customer's method differs, the supplier should report both results on the same lot, not convert one into the other. ## Protein and specific activity Total protein is measured by Bradford, Biuret or Kjeldahl, and specific activity is activity divided by protein mass, in LU per milligram. It separates a concentrate from a dilution: two preparations at 100,000 LU/g can carry different protein amounts, and less protein per unit of activity means a more purified material. Candida rugosa lipase is a glycosylated protein of about 60 kDa, and the species produces several isoforms. An SDS-PAGE profile therefore shows a band or a small group of bands, not a single clean line; it is a consistency check, not a fingerprint. A different pattern is a different material. ## The activity-to-protein ratio Specific activity is LU per milligram of protein, calculated from the same lot as the activity result. It separates a concentrate from a dilution: a powder cut with carrier loses LU/g and protein together, so the ratio holds, while a heat-damaged lot keeps its protein and loses activity, so the ratio falls. It is a consistency check, not a purity percentage, because the protein method counts fungal proteins and any protein carrier alike. Within one grade and supplier it should sit in a stable band; the protein method belongs beside it. ## XRD, and why lipase powder is not identified by it Lipase powder is amorphous, and its X-ray diffractogram is a broad halo with no reflections belonging to the enzyme. XRD cannot distinguish Candida rugosa lipase from another lipase, confirm the strain or measure LU. Sharp peaks come from a crystalline carrier, a salt or a mineral contaminant; they describe the formulation, not the protein. Protein crystallography needs a single purified crystal, not a production lot. The identity set here is the tributyrin assay with its conditions, total protein and specific activity, and an SDS-PAGE profile showing the expected band group near 60 kDa against a reference lot. ## The adulteration routes Lipase adulteration · what changes and what to check | Route | What changes | Check | Dilution with carrier | Activity per gram falls; protein and specific activity fall; ash or moisture may rise | Activity, protein, carrier and mass balance | Another lipase source | Activity passes; protein pattern and source record differ | SDS-PAGE, specific activity, strain audit | Spent or inactivated enzyme | Protein present, activity low; the powder may look normal | Activity against protein, plus a fresh standard | Added side activities | Protease or amylase appears; the declared lipase may still pass | Side-activity panel on the same sample | Water or salt | Loss on drying or ash rises; activity per gram falls | Loss on drying, ash and the activity basis None of these routes needs a sophisticated forgery. Dilution is the simplest and the easiest to detect if the specification asks for protein and specific activity beside the activity. Source substitution is harder, because the assay cannot tell one lipase from another; the protein pattern and production record catch it. ## How to write the specification Specification fields for a lipase lot | Field | What to write | Identity | Lipase (triacylglycerol lipase, EC 3.1.1.3; CAS 9001-62-1) from Candida rugosa | Activity | ≥100,000 LU/g | Unit definition | 1 LU = 1 µmol titratable butyric acid per minute from tributyrin at pH 7.0 and 30 °C | Basis | As-is; loss on drying ≤8.0% reported beside the activity | Protein | Total protein and specific activity (LU/mg protein) reported | Source | Species and strain recorded; organism absent from the final preparation | Carrier | Identity and inclusion declared on the COA | Side activities | Protease and amylase screened and reported | End of shelf life | Minimum activity at the stated storage condition, not only release A specification written this way can be checked by a second laboratory and audited by a second customer; a line reading only “lipase 100,000 LU/g” cannot. ## Five questions for a lipase supplier - What is the exact unit definition and assay: substrate, pH, temperature, reaction time, detection and standard? - What are the lot's activity, protein and specific activity, and on what basis is activity reported? - Which species and strain produced the lot, and how is the production organism removed? - What carrier or diluent is added, and which side activities are controlled and reported? - What activity remains after the customer's process step, and what stability data support the shelf life? The answers should match certificate and specification. The catalog position is on the lipase product page, the release lines on the COA page, the grade options on the grade page, and the workflow on the quality page. ### 01 What the COA for MSM actually contains URL: https://nutrition.rainwoodbio.com/products/specialty/msm/coa/ Reviewed: 2026-11-19 The certificate for an MSM lot reports appearance, assay by HPLC on the anhydrous basis, chromatographic purity, melting range, loss on drying, residue on ignition, particle size, heavy metals and microbiology. Each line should name the method, the release limit and the lot result. The ranges are the catalog specification; the batch COA confirms a drum. In one lineTwo percentages and a melting range carry the identity; the certificate still has to show the method, the limit and the lot result behind each one. ## The certificate as a test report A usable certificate reads line by line: what was measured, which method, and the release limit. A certificate that prints only limits is a specification, not a test report. Identity, assay, physical and contaminant limits · MSM | Parameter | Method | Release limit | Appearance | Visual | White crystalline powder | Assay (anhydrous basis) | HPLC, external standard | 99.0–101.0% | Chromatographic purity | HPLC, area normalization | ≥99.8% | Melting range | Capillary melting | 108.5–110.5 °C | Loss on drying | Gravimetric | ≤0.5% | Residue on ignition | Gravimetric | ≤0.1% | Particle size | Sieve analysis | ≥95% through 40 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent ## What the two percentages measure The assay is quantitative: the sample is compared with a reference standard and calculated on the anhydrous basis after loss on drying. Chromatographic purity is the MSM peak area divided by the total integrated area. One asks how much MSM is present; the other how much of the detectable material is MSM. The 99.0–101.0% window is a release window, not a claim that a drum can hold more than 100% material; the upper end absorbs measurement uncertainty, so 100.4% is not extra material. Purity by area normalization cannot see water or inorganic residue. A lot can show 99.9% of the peak area as MSM and still carry 0.5% water and 0.1% ash, because those components do not produce a peak. Loss on drying and residue on ignition belong beside the purity figure. The anhydrous calculation is often skipped: divide the as-is result by one minus the loss on drying, expressed as a fraction. For example, 99.0% as-is with 0.5% water becomes 99.50% anhydrous. Both statements can be true, and the basis has to travel with the number. The melting range is an identity check, not a purity assay. A sharp melt inside 108.5–110.5 °C is consistent with methylsulfonylmethane. Residual DMSO, a liquid at room temperature, or picked-up water can depress the start of the melt and broaden the range; a range outside the window is a reason to investigate, not a number to round. ## Release limit versus lot result The release limit is the acceptance boundary; the lot result is what the laboratory measured. Both belong on the certificate in separate columns. A result column filled with the release limit is not a result; it is a copy of the gate. How a lot result adds to the release limit | Parameter | Release limit | What the lot result adds | Assay | 99.0–101.0% anhydrous | The measured percentage, on the stated basis | Purity | ≥99.8% | The main-peak area share for the lot | Melting range | 108.5–110.5 °C | The observed start and end of the melt | Loss on drying | ≤0.5% | The water and volatiles driven off | Residue on ignition | ≤0.1% | The inorganic fraction left after ignition | Particle size | ≥95% through 40 mesh | The sieve result for the lot “Passes specification” is a conclusion the reader should reach from the numbers. The as-is assay matters for fill weight: a lot at the 0.5% moisture limit carries slightly less MSM per gram than a drier lot. Residue is where an inorganic diluent would show; a sulfate or sodium salt is white, soluble and invisible to UV, but it adds ash and lowers the assay. ## What moves between batches Water moves with the drying step and the pack. A lot dried to the lower end of the moisture range can pick up water during milling, blending or repacking if room humidity is not controlled. The anhydrous assay may stay inside the window while the as-is figure and flow change. Purity moves with the reaction and quench. The oxidation route from DMSO can leave unreacted precursor or a volatile sulfur species if the work-up is incomplete. Chromatographic purity would show a new peak; the assay alone would not. The melting range moves with residual DMSO and water. Both depress the start of the melt, so a lot that passes the assay but melts early deserves a look at the residual solvent data. A sulfurous odour can point to dimethyl sulfide, which HPLC may not separate from the solvent front. Particle size moves with milling and sieving. A 40 mesh certificate does not describe an 80 mesh order, and a granulated lot needs its own particle-size and bulk-density results. A trend across lots says more than one result at an edge. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a disputed result, or a claim the supplier's certificate does not prove. The useful panel answers the open question; it is not a full repeat of every line. For identity, ask for HPLC assay and purity, melting range and an FTIR spectrum against a reference. For process residues, ask for residual DMSO by gas chromatography and sulfate by ion chromatography. For the metal panel, ICP-MS; for microbiology, the same absence tests as the release specification. One submitted sample can carry the whole panel. Ask the laboratory to report its detection and quantification limits. A “not detected” line without a limit is not evidence about the sample; it is evidence about the method's sensitivity. The sample tested should be the sample retained, and the lot code should appear on the submission form, the certificate and the drum. ## What to compare between suppliers Put six lines side by side: assay and basis; purity and method; melting range; moisture; residue; particle size. Two quotations that agree on the assay but diverge on the rest are not the same powder. Supplier comparison · the six lines that separate MSM lots | Line | Ask for | Why it separates suppliers | Assay | Result, basis and LOD | A dry-basis figure can hide a wet lot | Purity | Result and HPLC detector | Area normalization sees only what elutes | Melting range | Observed start and end | Residual DMSO or water depresses the melt | Loss on drying | Result and method | Water changes fill weight and caking | Residue | Result and identity of the ash | An inorganic diluent hides from UV | Particle size | Sieve stack and result | 40 mesh and 80 mesh are different products The second layer is traceability. The lot code should match on the certificate, the drum and the retained sample. The certificate should name the manufacturer and the route; a correct certificate can still belong to another drum. The catalog specification sits on the MSM product page. Particle-size choices are compared on the grade page, the look-alike tests are on the identity page, and the release workflow is on the quality page. The separation is explained in the HPLC method note. ### 02 Crystal, powder or granulated: choosing an MSM grade URL: https://nutrition.rainwoodbio.com/products/specialty/msm/grades/ Reviewed: 2026-11-19 MSM is supplied as a 40 mesh crystalline powder, an 80 mesh milled powder and a granulated grade made to order. The molecule and the catalog assay stay the same; particle size, bulk density, flow, dust and fill weight change. The grade follows the dosage form and the label, not the mesh number alone. In one lineThe grade changes flow, fill and dust, not the molecule; choose it from the dosage form and the label. ## The grade is a physical decision Methylsulfonylmethane is a crystalline solid with a melting range of 108.5–110.5 °C. The standard grade is a crystalline powder with ≥95% through 40 mesh. Milling takes the same material to 80 mesh; granulation builds the fine particles into larger agglomerates. Neither milling nor binder-free granulation changes the chemical identity or the assay. What changes is the behaviour of the powder in handling. A coarser crystalline grade flows more freely and produces less dust. A finer powder disperses more quickly, blends more evenly into a dry mix and dissolves faster, but it also picks up moisture faster, cakes more readily and can bridge in a hopper. A granulated grade sits between the two: it flows like a coarser material while breaking down during mixing or compression. The catalog assay of 99.0–101.0% on the anhydrous basis and the chromatographic purity of ≥99.8% describe the MSM. They do not describe a granulated grade that contains a binder or carrier, because that powder is no longer only MSM. The added material has to be named, quantified and labelled. ## The grades side by side MSM grades · what changes in the drum | Grade | Typical cut | Flow and dust | Fits | Watch | Crystalline, 40 mesh | ≥95% through 40 mesh (425 µm) | Free-flowing; low dust | Capsules, tablets, dry blends | Coarser crystals can segregate in a fine blend | Milled, 80 mesh | ≥95% through 80 mesh (180 µm) | Slower flow; more dust | Sticks, suspensions, uniform blends | Moisture pickup, caking and dust control | Granulated | Agglomerates; cut agreed | Good flow; low dust | Tablets, sachets, high-speed fills | Declare any binder or carrier; the assay changes if one is used The mesh figures are sieve openings, not particle diameters: about 425 µm at 40 mesh and 180 µm at 80 mesh. A certificate that says “40 mesh” without the test method and oversize limit leaves the actual distribution open; two suppliers can claim 40 mesh and deliver different flows. ## What particle size changes Flow is the first difference. A coarser crystalline powder has less contact area between particles, so it pours more consistently and needs less help from a vibrator or a tamping station. A fine powder has more cohesion, holds air and can form a bridge over a hopper outlet. The same fine powder usually has a lower bulk density, which means a capsule of fixed volume holds less mass. Dust is the second. An 80 mesh powder puts more material into the air during weighing, blending and filling: a housekeeping and exposure issue, not a quality defect, but one that changes containment and cleaning. A granulated grade reduces dust without changing the chemistry. Moisture is the third. MSM is hygroscopic, and a finer powder exposes more surface to the room air. The loss-on-drying limit of ≤0.5% applies to the lot at release; it does not guarantee that the powder stays at that figure after a day in an open drum. A fine grade in a humid room can cake at the bottom of the blender while the top of the batch still looks free-flowing. Bulk density and flow should be measured, not inferred from the mesh. A tapped density, poured density, angle of repose or Hausner ratio is comparable only when the next supplier uses the same procedure. If fill weight is tight, put the bulk-density range and the flow method in the specification. ## What changes in the dosage form For capsules, flow and bulk density decide the fill weight and the speed of the filling machine. A 40 mesh crystalline grade is the usual starting point: it flows, it does not dust heavily, and it fills a dosator or a tamping station without much assistance. An 80 mesh grade can improve content uniformity in a low-dose blend, but it may bridge in the hopper and it holds more air, so the fill weight has to be re-established. For tablets, the press cares about compressibility and uniformity. A fine powder can distribute more evenly through the blend, while a granulated grade flows into the die and reduces weight variation. A coarse crystal that runs well in a capsule can segregate in a tablet blend if the other ingredients are much finer. The grade decision and the blend decision are one decision. For stick packs and drink mixes, dispersion and dust matter more than fill speed. An 80 mesh powder disperses quickly and looks uniform in the stick; a 40 mesh powder may settle or leave visible crystals. A granulated grade can dissolve more slowly if the agglomerates are dense, so the dispersion test belongs in the development batch, not only on the certificate. In a dry blend, match the MSM particle size and bulk density to the other ingredients. A coarse crystal in a fine premix can separate in transit; a fine powder can cling to the blender wall. The fix may be a granulated grade, a different mixing order or a finer cut, but it should be tested. ## What to put in the specification - “Methylsulfonylmethane, crystalline powder, ≥95% through 40 mesh.” - “Assay 99.0–101.0% anhydrous by HPLC; chromatographic purity ≥99.8%; melting range 108.5–110.5 °C.” - “Loss on drying ≤0.5%; residue on ignition ≤0.1%.” - “Bulk density and flow: report the method and the lot result.” - “Granulated: state binder-free or name the binder or carrier and its amount; declare the MSM content of the granulated material.” - “Heavy metals and microbiology as the catalog specification.” A specification that names only “MSM powder” leaves the mesh, the density and the granulation open. The certificate then repeats the ambiguity, and the buyer discovers the difference at the filling machine. ## When not to change grade If the current grade runs on the line and the fill weight is stable, there is no quality reason to switch. Milling a powder that already fills capsules well adds dust without adding control; granulating a blend that already compresses adds a process without adding robustness. “Crystal” on a label describes the physical form, not a higher purity. Ask what holds a granulated grade together. A binder-free granulation is still MSM; a granulation with a carrier adds an ingredient, changes the assay of the powder as sold and changes the label. “100% MSM” and “granulated with a carrier” cannot both be true of the same drum. A grade change is a revalidation: fill weight, flow, blend time, dust, caking and sometimes the finished-pack stability all move, and the new certificate has to repeat the new definitions. The crystal versus powder page takes the narrow comparison further; the COA page shows how the particle-size line is reported; the stability page covers moisture and caking; the MSM hub carries the catalog formats. The sieve terms are defined in the particle-size note. ### 03 MSM is hygroscopic; moisture and heat decide the shelf life URL: https://nutrition.rainwoodbio.com/products/specialty/msm/stability/ Reviewed: 2026-11-19 MSM is hygroscopic and melts at 108.5–110.5 °C, so moisture and heat change the powder before the molecule does. A sealed foil pouch or lined fiber drum, a cool dry store and a stability file tied to the pack underpin a shelf life. The catalog loss on drying is ≤0.5%; the pack has to keep the lot near that figure. In one lineMoisture and heat change the powder long before they change the molecule; the pack and the storage statement decide the shelf life. ## Moisture, caking and the as-is assay MSM takes up water from humid air. In a sealed pack the change is slow; in an open drum or a humid filling room it can be visible within a shift. The surface turns sticky, then forms lumps that do not break under gentle pressure. The lump is still MSM, but it no longer flows or disperses at the same rate. Water also changes the number on the certificate. The assay is reported on the anhydrous basis, so a lot can gain 0.3% water and still pass at 99.5% anhydrous while the as-is assay falls. That is not a contradiction; it is the basis doing its job. For fill weight and blend uniformity, the as-is figure and the loss on drying are what matter. A finer powder picks up moisture faster than a 40 mesh crystalline grade because it exposes more surface. The property that makes an 80 mesh grade disperse quickly also makes it harder to hold dry in an open room. Control the room humidity and keep the powder covered between steps. ## MSM in water MSM is freely soluble in water and the solution is close to neutral. The sulfone group is not a hydrolysis-prone ester, so in water the molecule is not the fragile part; the water is. An unpreserved, near-neutral solution is a microbial risk, and a drink mix that relies on MSM for preservation has no preservative at all. For a liquid, the stability work belongs to the formula: pH, preservative system, thermal process, headspace oxygen and the package. A hot fill or pasteurisation step should be covered by a trial that measures MSM, appearance and microbiology before and after. The melting range says nothing about behaviour in solution. In a dry stick or blend, water is the enemy on both sides: moisture in the MSM and in the other ingredients. A hygroscopic excipient can pull water from the MSM or release it into the blend. Measure the water activity of the finished mix, not only the loss on drying of the raw material. ## What moves the powder Storage and process factors · MSM | Factor | What it does | Control | Humidity | Moisture pickup, caking, as-is assay loss | Sealed pack, low-humidity room, reseal after use | Heat near the melt | Fusion, hard lumps on cooling | Keep drying and handling below the melting range | Compression | Caking in stacked bags or drums | Pallet limits; rotate stock; avoid long storage under load | Pack barrier | Water-vapour ingress over time | Foil pouch or lined fiber drum; intact seals | Odour | Pickup of volatile odours in store | Segregate from aromatic materials Heat is a physical risk more than a chemical one. Below the melting range, MSM is thermally stable in normal storage. If the powder reaches the melt in a dryer, hot room or poorly controlled mill, it can fuse and recrystallise into a hard mass on cooling. That mass may still assay as MSM, but it has to be milled again, and the particle size and flow are no longer the certified grade. Compression is the quiet factor. A pallet of 25 kg drums stacked for months loads the bottom bags; a 1 kg pouch under a heavy carton can cake at the fold. The pack and the stack height belong in the storage instruction, not only the temperature. ## A stability protocol for the pack A shelf-life claim needs data from the pack that will be sold. Test the 1 kg foil pouch and the 25 kg drum as they are, not only bulk powder in a laboratory jar. If the finished product is a capsule or a stick, test that too: the package and the formula can fail before the raw material does. A workable design uses 25 °C/60% RH as the long-term condition, 30 °C/65% RH as the intermediate condition and 40 °C/75% RH as the accelerated condition, with the caveat that these are ICH storage conditions used by reference rather than a legal requirement for a food supplement. Timepoints of 0, 3, 6, 9, 12, 18 and 24 months for the long-term arm and 0, 1, 2, 3 and 6 months for the accelerated arm are a common starting point. At each point, test appearance, loss on drying, assay, purity, melting range, microbiology and particle size or flow. Weigh the pack, inspect the seal and check for caking. A result that passes the assay but shows a hard lump is a pack failure, not a molecule failure, and the shelf life should reflect that. ## The formula around the powder In capsules and tablets, the other ingredients decide how much water the blend holds. A direct-compression blend with anhydrous excipients is easier to protect than a wet-granulated one, which must be dried back to a low moisture figure. If the process uses water, validate the drying step against the loss-on-drying limit and check the tablets for caking in the blister. In sticks and sachets, the foil laminate is the barrier. A paper or low-barrier film pack lets moisture through, and a stick that cakes in a humid warehouse is a pack failure even when the raw material was released at 0.2% water. The fill-room humidity and the time the powder spends in the hopper belong in the process description. In a liquid, the preservative system and the thermal process carry the stability. MSM may be compatible with many formula ingredients, but compatibility has to be tested: a change in pH, a preservative that partitions differently or a package with a high oxygen transmission can all shorten the shelf life without changing the MSM assay. ## What the shelf life means The shelf life is the period the stability data justify for the specified pack. It is a conclusion, not a default, and it belongs in the specification and on the certificate with the storage statement. A retest date says the lot can be re-analysed and used; an expiry date says it should not be used after that point. Keep the pack sealed, store it cool and dry, and protect it from odours. The shelf life applies to the unopened pack; once opened, the powder is exposed to the room and needs a reseal instruction and a realistic use period. Monitor the pack, not only the certificate. A lot released at 0.2% water can cake in a pack with a failed seal, and a lot released at 0.5% can stay free-flowing in a good one. The COA page shows the moisture and melting lines to track; the ordering page covers the pack formats; the grade page explains why a finer powder is more exposed. The MSM hub carries the catalog specification, and the loss-on-drying note defines the test. ### 04 MSM: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/specialty/msm/moq/ Reviewed: 2026-11-19 The minimum order for MSM is 1 kg, supplied from a released lot in a 1 kg foil pouch; the 25 kg fiber drum is the standard bulk pack. Lead time is 1–7 days for a stocked grade, and a firm quotation needs the grade, quantity, pack, destination, documents and tests before it can be issued. In one lineOne kilogram is the entry point; a firm quotation starts from the grade, the pack and the destination, not from the MOQ alone. ## Why the minimum is 1 kg One kilogram is enough for a bench trial, a small pilot batch or a first production run, and it is small enough to be handled as a single sealed unit. The order is drawn from a released lot, so the pouch carries the same lot code, certificate and retained sample as a 25 kg drum. The minimum is a handling unit, not a statement about the smallest quantity a formulator might want. There is also a practical reason. Opening a 25 kg drum to weigh out a small quantity exposes the rest of the drum to the room, and MSM is hygroscopic. A sealed 1 kg pouch avoids that exposure and keeps the lot traceable to the pack the buyer actually received. A 1 kg order does not change the release standard. The assay, purity, melting range, moisture, residue, particle size, heavy metals and microbiology are the same specification lines as a drum order; only the pack and the quantity change. ## Packs and labels The two standard packs are a 1 kg foil pouch and a 25 kg fiber drum. The pouch is the moisture barrier and the unit a small buyer can reseal; the drum is the handling and transport unit for production. Both carry a label with the product name, the grade, the lot code, the net weight, the manufacture or retest date and the storage statement. MSM pack formats · what each one is for | Pack | Typical use | Handling note | 1 kg foil pouch | Bench trial, pilot batch, small launch | Reseal after opening; keep the lot label with the pack | 25 kg fiber drum | Production, blending, contract filling | Keep the inner liner closed; use a drum tipper or a clean scoop The net weight is filled by weight, not by volume. A 25 kg drum of 80 mesh powder and a 25 kg drum of 40 mesh crystals contain the same mass but not the same volume, and the drum fill level will differ. If the pack is part of the buyer's process, ask for the bag or liner dimensions rather than assuming they match the last supplier. A desiccant can be added by agreement, provided it does not contact the powder. It is not a substitute for an intact seal: a desiccant inside a leaking pouch will saturate and stop protecting the powder. ## Lead time A stocked grade has a 1–7 day lead time. The clock starts when the order, the specification revision and the destination are agreed, not when the first enquiry arrives. A made-to-order 80 mesh or granulated grade may need additional scheduling, and a new lot may need release testing before it can ship. Documents can take as long as the powder. A destination that needs a legalised certificate, a specific language on the label or an extra contaminant test adds time after the material is ready. The order confirmation should state the ship date and list the documents that will travel with the lot; a date given before those details are settled is an estimate. ## What a quotation needs Six details turn an indication into a quotation that can be checked against the specification: Six details a firm MSM quotation needs | Item | What to state | Why it changes the offer | Product and grade | Methylsulfonylmethane, 40 mesh, 80 mesh or granulated | Different cut, different pack fill and possibly a different lot | Quantity | Net kilograms and number of packs | Sets the pack count and the handling | Pack | 1 kg pouch or 25 kg drum | Changes the fill, the label and the transport unit | Destination | Country and delivery point | Sets the documents, the route and the delivery term | Documents | COA, TDS, SDS, specification and statements | A document set that is not quoted may not be included | Tests and specification | Catalog lines plus any extra test | An extra test can change the lead time and the release A quotation that omits one of the six is an estimate. The same material can be offered at different terms because the pack, the destination or the document set changed, not because the powder changed. ## Samples before the first order A sample should come from a released lot, with the lot code on the sample label, and it should be enough to run the trial more than once. Test it in the actual process: the capsule machine, the tablet press, the stick filler or the blender. A sample that flows in a beaker can still bridge in a hopper. Keep the sample label and the certificate together. A sample without a lot code cannot be compared with the production lot, and a sample that was drawn from a different grade does not prove the grade on the order. The sample is a preview of the lot, not a substitute for the release COA. ## Terms to settle with the order The technical terms and the commercial terms should be agreed together. On the technical side: product and grade, specification revision, pack, lot traceability, documents, sampling and the non-conformance procedure. On the commercial side: quantity, delivery term, payment term and the date the order is firm. Write the specification revision into the purchase order. A supplier can ship a material that meets the catalog but not the revision the buyer tested, and the difference is usually in the particle size, the moisture or an extra test. The retained sample is the reference if a dispute arises; a photograph is not. Agree what happens if a pack fails on arrival: who inspects, which laboratory tests it, and which lot is compared. The answer should be in the order, not invented after the drum is open. The COA page lists the release lines; the grade page explains the pack and particle-size choices; the stability page covers storage; the MSM hub carries the catalog formats. The MOQ note defines the term. ### 05 Where MSM is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/specialty/msm/compliance/ Reviewed: 2026-11-19 MSM is sold as a food supplement ingredient in the EU, US and UK, but it is not a vitamin or mineral and is not on the EU Annex II nutrient list. The file must show the route to market, contaminant results against destination limits, a label naming the substance and claims inside the food-law boundary. This page maps those checks at the date of review; the legal text in force in the destination market governs. In one lineMSM is not an Annex II nutrient; its file has to prove the route to market, the limits and the label, not a nutrient listing. ## Three questions, not one Selling MSM into a market raises three questions. What is the legal route for this substance? Which contaminant limits apply to the finished supplement? And what may the label and the claim say? A positive answer to one does not answer the others. The route can be a national food-supplement rule, a novel-food assessment or a dietary-ingredient basis. The limits are written for the product as sold, not for the raw material. The label rule names the substance and amount; the claim rule decides what may be said beyond that. ## European Union MSM is not listed in Annex I or Annex II to Directive 2002/46/EC, which cover vitamins and minerals. It is used as an “other substance” in food supplements under general food law and national rules. The EU Novel Food Catalogue has recorded methylsulfonylmethane as not novel in food supplements; that catalogue entry is a Commission information tool, not an authorisation, and the destination Member State’s rules still apply. The supplement label follows Regulation (EU) No 1169/2011 and the particulars of Directive 2002/46/EC: the words food supplement, the substance and amount per portion, the dose warning, the children warning and the varied-diet statement. MSM has no nutrient reference value, so a % NRV figure would have nothing to refer to. Contaminants fall under Regulation (EU) 2023/915. Lead is limited to 3.0 mg/kg, cadmium to 1.0 mg/kg and mercury to 0.10 mg/kg in food supplements; there is no harmonised EU maximum for arsenic, so the buyer sets one. A raw-material specification at the same figure as the finished-product limit leaves no room for the rest of the formula. ## United States In the US, MSM is sold as a dietary ingredient, and the file should state the basis: marketing before 15 October 1994, a new dietary ingredient notification, or a GRAS conclusion that covers the intended use. FDA GRAS Notice 229 covers methylsulfonylmethane in certain conventional foods at specified levels, not every supplement use; the basis must match the product. The Supplement Facts panel is set by 21 CFR 101.36. MSM appears as a dietary ingredient with the amount per serving; it has no Daily Value, so no % Daily Value is declared. The source and any excipients belong in the ingredient list. 21 CFR 111 requires identity testing, supplier qualification and batch records; the buyer’s own identity test on receipt is part of the file. There is no federal maximum level for lead in dietary supplements. California’s Proposition 65 supplies an exposure limit, and state rules can differ. A structure/function statement is allowed if it is truthful and substantiated, and it must carry the DSHEA disclaimer; a disease claim falls outside the supplement framework. ## United Kingdom Great Britain applies a retained food-supplement framework. The Food Supplements (England) Regulations 2003 set the vitamin and mineral forms; MSM is an “other substance” sold under general food law. Check the novel-food position against Food Standards Agency guidance for Great Britain, because the GB and EU catalogues can diverge. Contaminants in GB are retained from Regulation (EC) No 1881/2006 rather than replaced by the EU’s 2023/915, with the same supplement figures at the date of this note. Labelling follows the Food Information Regulations 2014 and the 2003 Regulations; the label carries the UK address of the food business operator. The GB claims register is separate from the EU register, and Northern Ireland continues to apply the EU rules under the Windsor Framework. ## The contaminant table Contaminant limits for food supplements · EU, US and UK | Element | EU | US | UK | Lead | 3.0 mg/kg | No federal supplement maximum; Prop 65 may apply | 3.0 mg/kg retained | Cadmium | 1.0 mg/kg | No federal supplement maximum | 1.0 mg/kg retained | Mercury | 0.10 mg/kg | No federal supplement maximum | 0.10 mg/kg retained | Arsenic | Not harmonised; Member State limits possible | No federal supplement maximum | Not harmonised The catalog raw-material limits are Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg. They are not the finished-product limits in the table. If MSM is 5% of the daily portion, a raw material at the lead limit contributes a small share of the finished-product figure; if it is most of the portion, it can use up the allowance. Do the arithmetic from the daily dose and the ingredient share. ## What the label and claim may say No health claim for MSM is authorised in the EU register under Regulation (EU) No 432/2012 at the date of this review, and the GB register has no MSM claim either. Any statement beyond the name and the amount must be general and truthful, must not be medicinal, and must not carry a health claim. “No disease-related claim” is the simplest rule for the artwork brief. In the US, a structure/function statement can describe the role of the ingredient in normal structure or function if it is substantiated and carries the DSHEA disclaimer. The marketer must notify FDA within 30 days of first marketing it. A disease claim is not permitted in any of these markets. The specification and certificate are not claims; assay, purity and melting range do not become a health claim, and the label copy should not either. ## The document pack - Lot COA with method, release limit and result for each line. - Specification and TDS naming the grade, particle size and pack. - SDS in the 16-section format. - EU/UK novel-food status note, with the catalogue reference and the date checked. - US dietary-ingredient basis: pre-1994 evidence, NDI notification or GRAS conclusion. - Heavy-metal and microbiology reports, plus a residual DMSO and sulfate statement where the route or the buyer calls for it. - Allergen, GMO, irradiation and animal-origin statements. - Stability summary and the storage statement. Each document should carry the lot code, or name the lot it belongs to. A TDS written for the catalog and a COA written for one lot match only if the grade, pack and specification revision agree. ## What to check before the first order - Is the route to market documented for the destination, and is the novel-food position current? - Do the contaminant results meet the finished-product limit at the daily dose? - Does the label name methylsulfonylmethane and the amount per portion, without a % NRV? - Is every claim inside the EU/GB register or a disclaimed US structure/function statement? - Is the US dietary-ingredient basis matched to the intended use? - Does every document carry the lot code, grade and specification revision? The COA page lists the release lines; the identity page covers the tests that prove the substance; the MSM hub carries the catalog specification. The EU, US and UK notes expand each market. ### 06 How we prove an MSM lot is methylsulfonylmethane URL: https://nutrition.rainwoodbio.com/products/specialty/msm/identity/ Reviewed: 2026-11-19 An MSM lot is identified by four layers: the lot documents and chain, the HPLC assay and purity, the melting range, and an IR spectrum against a reference. The name DMSO2 is a synonym for MSM; DMSO is a different molecule, and a certificate that confuses the two has not identified the material. In one lineHPLC, melting range and IR have to agree, and the paperwork has to tie those results to the drum; a synonym is not an identity test. ## Four layers of identity Identity is not one test. It is a set of results that agree with each other and with the drum in front of the buyer. The layers below are independent enough that a swapped certificate or a mislabelled pack has a chance of showing up. Four identity layers · MSM | Layer | Test | What it proves | What it does not prove | Document | COA, lot code, retained sample | The results belong to the lot | That the results are correct | Chromatography | HPLC assay and purity | The main component behaves as MSM | Water, salts or the solid form | Physical constant | Melting range | The solid is consistent with MSM | A quantitative purity figure | Spectroscopy | FTIR against a reference | The functional groups match | How much is present The document layer is the one buyers skip. A certificate with a correct assay but no lot code, or a lot code that does not match the drum, is a result about some powder, not this delivery. The three analytical layers then have to agree: HPLC says MSM, the melting range sits inside 108.5–110.5 °C and the IR matches the reference. ## Assay, purity and the sulfur ratio MSM is C2H6O2S, one sulfur atom in a molecule of 94.13 g/mol; sulfur is 34.06% of the mass. That ratio is a useful cross-check: a reported sulfur result should agree with the assay within the uncertainty of both methods. A sulfur figure that implies more or less MSM than the assay allows is a reason to look at the method and the sample. The assay and the chromatographic purity are not the same ratio. The assay is a quantitative result against a reference standard, reported on the anhydrous basis; the purity is the MSM peak area divided by the total integrated area. A lot can be 99.9% pure by area and 99.0% by assay because water and inorganic residue do not appear in the chromatogram. The gap between the two numbers is where those components live. The ratio also catches arithmetic errors. A certificate that reports 101.5% assay is outside the catalog window; 99.9% purity with a 98.5% assay is not necessarily wrong, but the gap needs an explanation. Ask for the loss on drying and the residue before deciding which number is the outlier. ## The solid-state check The melting range is the routine solid-state test. A pure crystalline solid melts sharply, and the catalog window of 108.5–110.5 °C is narrow enough to catch a material that is wet, cut with a low-melting residue or not the named substance. It is an identity and consistency check, not a purity assay: a eutectic mixture can melt over a range, and a pure material can read a degree low if the thermometer is off. X-ray diffraction is the deeper solid-state check. A diffraction pattern fingerprints the crystal lattice, so it can distinguish a different crystal form or a crystalline look-alike that the melting range cannot resolve. It is not a routine release test or a purity assay; it sees crystalline phases above its detection limit, not water or amorphous content. Ask for XRD when a supplier claims a special crystal form, when qualifying a new source, or when the melting range is ambiguous. Differential scanning calorimetry can confirm the melting transition, but the capillary range on the certificate is enough for release. The extra technique helps when the basic layers disagree. ## DMSO, DMSO2 and the other look-alikes Look-alikes and impurities · what they are and how they show | Name | What it is | How it shows | DMSO | Dimethyl sulfoxide, C2H6OS, CAS 67-68-5; a different molecule and a common precursor | Residual solvent by GC; melting range depression | DMSO2 | A synonym for MSM, not a separate homologue | Check the CAS: 67-71-0 is MSM | Sulfate or sodium sulfate | A white, water-soluble inorganic diluent | Residue on ignition, ion chromatography, low assay | Dimethyl sulfide | A volatile sulfur species with a strong odour | GC and odour; may not separate by HPLC | Water | Moisture picked up in handling | Loss on drying; as-is assay The naming confusion is simple. DMSO2 is the same molecule as MSM; a supplier selling “DMSO2” is selling MSM. DMSO is a different solvent, with CAS 67-68-5, a different formula and a melting point of about 18.5 °C. A certificate that lists DMSO as a residual impurity is plausible for an oxidation route; a certificate that uses DMSO as the product name is a different product. Sulfate is the dilution risk a UV-based HPLC method can miss. Sodium sulfate is white, soluble and has no chromophore at the detection wavelength, so it can add mass, lower the assay and leave the purity looking clean. Residue on ignition and ion chromatography see it. A high residue with a clean HPLC is a signal to ask for the ash composition. Dimethyl sulfide is the odour risk. A sulfurous smell on an otherwise white powder can come from a trace volatile species the HPLC method does not resolve. It is not proof of adulteration; ask for the GC data and the drying step. Water is the least exotic explanation: a lot that was dry at release can pick up moisture in an open drum, and the caking looks like a quality problem but is a pack problem. ## How to write the identity block - “Methylsulfonylmethane (dimethyl sulfone), CAS 67-71-0, C2H6O2S.” - “Assay 99.0–101.0% on the anhydrous basis by HPLC; chromatographic purity ≥99.8%.” - “Melting range 108.5–110.5 °C; FTIR spectrum conforms to the reference.” - “Loss on drying ≤0.5%; residue on ignition ≤0.1%; ≥95% through 40 mesh.” - “Residual DMSO: report the result and agree the limit for the application.” - “Sulfate: report the result and agree the limit for the application.” - “Lot code on the COA, the drum and the retained sample.” The residual DMSO and sulfate lines are not in the catalog specification, and they should not be invented as fixed numbers. They are clauses to agree when the route or the application makes the residue relevant. A specification that says only “MSM 99%” leaves the identity, the water and the inorganic fraction open. ## Five questions for the supplier - What is the manufacturing route, and is DMSO the precursor? - What is the residual DMSO result, and which method produced it? - Is sulfate or ash reported, and what limit applies to this grade? - Does the certificate include the melting range and an FTIR spectrum against a reference? - Can the COA, the drum and the retained sample be tied to one lot code? Five direct answers amount to an identity file. A single assay percentage does not. The COA page sets out the certificate lines; the compliance page covers the market file; the MSM hub carries the catalog specification. The HPLC and FTIR notes explain the methods. ### 02.1 MSM crystal vs powder: flow, fill and the label URL: https://nutrition.rainwoodbio.com/products/specialty/msm/grades/crystal-vs-powder/ Reviewed: 2026-11-19 The 40 mesh crystalline grade and the 80 mesh milled powder are the same molecule at two particle sizes. The crystal flows and fills more easily; the powder disperses and blends more evenly but dusts, cakes and takes up moisture faster. The label names methylsulfonylmethane either way; the mesh is a specification, not an ingredient. In one lineCrystal and powder are the same molecule at two particle sizes; the choice is flow, fill and dust, not purity. ## Two cuts, one substance “40 mesh” and “80 mesh” are sieve cuts, not single particle diameters. A 40 mesh sieve has openings of about 425 µm; an 80 mesh sieve about 180 µm. The catalog grade is a crystalline powder with at least 95% passing 40 mesh, so it is not a coarse lump product: most of the powder is already below 425 µm. The 80 mesh grade is the same material milled finer, with most particles below 180 µm. The difference is surface area. Milling breaks the crystals and creates more faces per gram, which changes how the powder interacts with air, water and the other ingredients in a blend. The chemistry does not change: the assay remains 99.0–101.0% on the anhydrous basis and the melting range remains 108.5–110.5 °C. A finer cut is not a purer cut. Particle size distribution matters as much as the mesh number. A powder that is mostly 300 µm with a few fines behaves differently from one that is mostly 150 µm with the same sieve pass figure. Ask for the distribution and the oversize limit, not only the mesh name. ## Flow and dust A coarser crystalline powder has less surface area per gram and fewer cohesive contacts, so it pours more freely and resists bridging in a hopper. The 40 mesh grade is the easier material to feed into a capsule machine, a tablet press or a sachet filler. It also generates less dust during weighing and blending, which simplifies containment and cleaning. An 80 mesh powder is more cohesive. It holds air, forms lumps under pressure and can arch over an outlet. It also produces more airborne dust, which is a handling issue rather than a quality defect but still changes the room, the extraction and the operator protection. In a dry blend, the finer powder can cling to the blender wall and leave the mix short of the intended ratio. Flow is a property of the whole system, not only the powder. Humidity, static, hopper geometry and the fill tool all matter. A powder that flows in a laboratory beaker can fail in a production hopper, and a powder that bridges in one machine can run in another. Test the actual grade on the actual line. ## Fill weight and content uniformity In a capsule, the fill weight is set by the volume of the dosator or tamping cavity and the bulk density of the powder. A coarser crystal usually has a higher bulk density and fills a fixed volume more consistently; a finer powder holds more air and can give a lighter, more variable fill. If the capsule size is fixed and the label amount is tight, the 40 mesh grade is the safer starting point. In a tablet, the powder has to flow into the die and compress into a uniform tablet. A finer powder can distribute more evenly through the blend, but it may not flow as well; a granulated grade can solve both problems at the expense of an extra process and a possible carrier. A coarse crystal that runs well in a capsule may segregate in a tablet blend if the other ingredients are much finer. In a stick pack, the powder has to disperse in the pack and in the cup. The 80 mesh grade disperses faster and looks more uniform; the 40 mesh grade can settle or leave visible crystals. The trade-off is dust and moisture pickup on the filling line, which is a process decision rather than a label decision. ## What the label can say The ingredient is methylsulfonylmethane, and that is the name that belongs in the ingredient list. “Crystal” and “powder” describe the physical form; they are not required label terms and they do not change the declared ingredient. A label that says “MSM crystal” is still declaring MSM, and a label that says “MSM powder” is declaring the same substance. “Crystal” must not be used to imply a higher purity or a special grade. The assay and purity are set by the specification, not by the word on the front of the pack. If the powder is granulated with a binder or carrier, the granulation is an added ingredient and has to be declared; if it is binder-free, the label is still MSM, but the particle size and the flow are different from the standard grade. The net weight is the weight of the powder, not the volume. A 1 kg pouch of 80 mesh powder and a 1 kg pouch of 40 mesh crystals contain the same mass; the fill level differs because the bulk densities differ. ## When to choose which Crystal or powder · the dosage form decides | Use case | Choose | Why | High-speed capsule filling | 40 mesh crystal | Flow and fill weight are easier to hold | Low-dose capsule blend | 80 mesh powder | Better distribution, but check hopper flow | Direct-compression tablet | 40 mesh or granulated | Flow into the die; granulation adds robustness | Stick pack or drink mix | 80 mesh powder | Faster dispersion; control dust and moisture | Blend with fine ingredients | Match the cut or granulate | Reduces segregation and dusting The table is a starting point, not a rule. A low-dose capsule may need the finer powder for uniformity and a flow aid to get it into the capsule; a stick pack may need the coarser grade to avoid dust in a high-speed filler. The only reliable answer comes from a trial on the line with the actual blend. ## What to write into the specification - “Methylsulfonylmethane, crystalline powder, ≥95% through 40 mesh.” - “Milled powder, ≥95% through 80 mesh; state the oversize limit and the distribution.” - “Assay 99.0–101.0% anhydrous by HPLC; purity ≥99.8%; melting 108.5–110.5 °C.” - “Loss on drying ≤0.5%; residue on ignition ≤0.1%.” - “Bulk density and flow: report the method and the lot result.” - “Granulated: state binder-free or name the binder and its amount.” A specification that says only “MSM powder” leaves the cut, the density and the granulation open. The grade page places the choice in the wider range; the COA page shows how the particle-size line is reported; the stability page covers moisture and caking; the MSM hub carries the catalog formats. The sieve terms are defined in the particle-size note. ### 01 What the COA for fungal alpha-amylase actually contains URL: https://nutrition.rainwoodbio.com/products/enzymes/amylase/coa/ Reviewed: 2026-11-19 A fungal alpha-amylase certificate is short: appearance, SKB activity, pH, moisture, mesh, metals and microbiology. Every line but one is a conventional check. The activity line is a kinetic measurement, and its value depends on how the laboratory ran the starch-iodine assay. What follows is the catalog specification and the reading a buyer should apply to the batch document that arrives with a drum. In one lineAn SKB/g figure is a dextrinisation rate measured under one assay, so a certificate has to carry the unit definition, the starch substrate and the conditions next to the activity. ## What a release certificate has to carry Each line answers a question: what the powder looks like, what it does, how it behaves in water, how much water it retains, how it flows, what contaminates it and what is growing in it. Three columns — parameter, method, limit — make those answers auditable. The activity line also needs the assay conditions and the unit definition, or the number cannot be repeated by anyone else. Catalog release specification · fungal alpha-amylase from Aspergillus oryzae | Test | How it is run | Limit | Appearance | Visual inspection | Off-white to light tan, free-flowing powder | Amylase activity | Iodine dextrinisation on soluble starch, reported in SKB/g | ≥100,000 SKB/g | pH, 1% solution | Potentiometry | 4.8–5.4 | Loss on drying | Gravimetric | ≤8.0% | Particle size | Sieve analysis | ≥95% through 40 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count plus absence tests | APC ≤10,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent CAS 9000-90-2 identifies alpha-amylase as an enzyme, not the drum in front of you. A specification should therefore also name the production organism, the carrier and the lot, because those three define the preparation that was actually tested. ## Reading the SKB/g figure The number begins as a time. A diluted sample is mixed with soluble starch at 30 °C and pH 4.8, and the clock stops when the iodine colour matches the reference. A shorter time means more enzyme. The method multiplies the starch charge by a fixed factor and divides by sample weight and time, so the output is units per gram of powder as sold. The unit is small by design, which is why commercial figures run to six digits: at 100,000 SKB/g, a kilogram holds a hundred million units. Protein content is a separate measurement, and activity divided by protein — specific activity — is what separates a genuine concentrate from a powder that has been extended with carrier. What the activity line has to nail down | Item | Required detail | Effect if it is missing | Unit basis | SKB per gram of powder as sold | Could be mistaken for units per gram of protein | Starch | Soluble starch, supplier and grade named | Two starch lots give two rates | Temperature | 30 °C, as the method specifies | A rate at another temperature is a different number | pH | 4.8, as the method specifies | Activity drifts outside the working window | Colour reference | Iodine standard, identified | The endpoint moves, and so does the time | Calculation | Starch × factor ÷ (sample × time) | The factor is part of the method, not the enzyme | Moisture basis | As-is, or calculated to dry solids | Water changes the figure without changing the enzyme ## One-sided limits, and what the result adds ≥100,000 SKB/g is a floor. A lot released at 104,000 SKB/g and a lot released at 190,000 SKB/g are both compliant, and they behave differently in a process that will consume part of the activity. The measured value is the useful number; the limit only tells you the powder passed. Ask for three fields beside the result: the method reference, the release date, and a statement of whether the figure describes release or the end of the declared shelf life. A buyer comparing two offers without the third is comparing different promises. A retest date, and the assay's relative standard deviation, complete the picture: where repeatability is poor, a result slightly above the floor is not a comfortable margin. ## Where lot-to-lot spread comes from Fermentation is biology, and biology drifts. Strain, medium, aeration and harvest time change the protein mixture in the broth; ultrafiltration decides how much of it is carried into the concentrate; standardisation with a food-grade carrier fixes the final activity per gram. Where a supplier lands inside the release window is a commercial decision as much as a technical one. Water and heat move the figure after fermentation. A powder dried to a higher moisture reads lower per gram even though the enzyme is intact, and frictional heat at the mill can destroy activity before the sieve is reached. Colour deserves a note rather than a rejection: a tan shift can follow a longer or hotter dry while the assay still passes, so check the batch record before reading colour as a failure. Method drift is the quiet one. A new starch supplier, a re-made iodine reference or a different incubation bath makes two SKB/g results incomparable even when both certificates use the same words. ## Buying an independent assay Outside testing earns its place when the source is new, when the market is new, when a customer disputes a result, or when a label statement rests on the activity figure. The panel can stay narrow: activity by a named SKB method on a retained sample, protein, loss on drying, ICP-MS metals, microbiology, and a protein pattern against a reference lot. The laboratory must use the same starch, temperature and endpoint as the specification, or the exercise compares methods rather than powders. A report in DU is not a second opinion on an SKB/g result — SKB and DU are different scales. Require the lot code on the sample and on the report, and check the accreditation scope behind each test. ## Six lines for a side-by-side review Line up the unit, the method and its conditions, the measured result, protein or specific activity, moisture and mesh, and the strain with the carrier. Two suppliers can agree on SKB/g and disagree on the other five, which means the powders are not interchangeable; the difference will appear at the first trial, not on the quotation. Traceability comes next. The certificate, the bag and the retained sample should share one lot code, and the certificate should name the organism and strain. A genuine certificate attached to a different lot is still the wrong document for the delivery. Catalog values sit on the amylase product page. The dilution and substitution checks are on the identity page, the release sequence behind the document is described on the quality page, and the terms are defined in the COA glossary entry. ### 02 100,000 SKB/g or a dilution: choosing an amylase grade URL: https://nutrition.rainwoodbio.com/products/enzymes/amylase/grades/ Reviewed: 2026-11-19 Grade choice for this powder comes down to three variables: the activity per gram, what that activity is carried on, and the particle form. The catalog standard is a 40 mesh powder at ≥100,000 SKB/g; a dilution to an agreed lower activity and a granulated version exist as options. Each choice changes what a gram does and what else enters the formula. In one lineA grade is an activity figure plus the material that carries it, so the SKB/g number alone does not tell a formulator what a gram of powder will do to the blend. ## No purity figure exists for an enzyme An enzyme preparation is a fermentation product that has been concentrated and standardised. It contains the enzyme, other proteins and fermentation residues, and whatever carrier was used to bring the activity to the declared figure. No single percentage captures that mixture, so the trade describes a grade by its activity, its carrier and its form instead. Two catalogues can both say "fungal alpha-amylase" and mean different materials: one a 100,000 SKB/g concentrate, the other a 25,000 SKB/g dilution that carries four times the mass for the same number of units. Both are legitimate products for different jobs. They are not interchangeable gram for gram, and the COA page explains how each is certified. What the grade controls | Choice | What it sets | Where it bites | Activity | Units delivered per gram | Charge weight, overage, label basis | Carrier | What the enzyme is diluted on | Ingredient list, moisture pick-up, flow | Mesh | Particle size and surface | Mixing, wetting, airborne dust | Form | Powder or granule | Dust control, dispersion time, process loss | Strain | The organism behind the lot | Identity file, market authorisation ## Three forms in the catalog The standard powder is the reference grade. The dilution is made to an agreed activity when a formula needs a heavier charge; the granulated option is made when dust is the constraint. All three are the same enzyme from the same organism, standardised to different targets. Catalog options and the formula consequence | Option | Activity | Form | Consequence for the formula | Standard powder | ≥100,000 SKB/g | 40 mesh powder | Lightest charge; made for blends | Dilution | Agreed in the specification | Powder | Heavier charge; more carrier on the label | Granules | Agreed in the specification | Granulated | Less dust; slower wetting; process loss to check None of these figures can be compared across unit systems. An SKB/g result and a DU/g result describe different assays, as the SKB and DU note sets out. ## Mesh, flow and dust At ≥95% through 40 mesh, roughly 420 µm, the powder mixes evenly into a dry blend and wets quickly in water, giving the clear to faintly hazy solution the specification describes. The same fines that speed wetting also stay airborne. Enzyme dust is a respiratory sensitiser, so extraction, closed transfer and a suitable mask belong in the handling plan, and the SDS carries the hazard language. Granules trade wetting speed for a cleaner room. They are the better choice where operators handle kilos a day; they are the wrong choice for a stick pack that must disperse in seconds. Granulation also adds water and heat, so the activity of the granule has to be measured after the step rather than calculated from the powder that went in. ## Working out the charge weight Begin with the units the batch needs. A 200 kg blend dosed at 50,000 SKB per kilogram requires 10 million SKB, which is 100 g of the 100,000 SKB/g powder or 500 g of a 20,000 SKB/g dilution. The units are identical; the mass, the carrier load and the label entry are not. At the dilution, each part of enzyme arrives with four parts of carrier. Weighing decides most cases. A 100 g charge is routine on a production scale and fiddly in a 5 kg pilot, where both balance and mixer resent a small addition. A dilution buys precision with carrier, and the carrier then has to be declared and dispersion-tested like any other ingredient. Two details belong beside the arithmetic: the label basis, release or end of shelf life, and a certificate for the diluted lot itself. The concentrate's assay does not certify the dilution made from it. ## Turning the choice into specification lines Seven lines: activity with unit and method reference; loss on drying at ≤8.0%; particle size at ≥95% through 40 mesh; carrier identity; production organism and strain; form; and the labelled basis with the storage statement. A line that cannot be measured at goods-in does not belong in a purchase specification. Write the activity as "not less than" and keep the method appendix under change control. If the starch source or the colour reference changes, two results carrying the same unit are no longer comparable. The specification glossary entry covers the vocabulary, and the identity page covers the checks that keep a diluted lot honest. ## When dilution works against you A blend already near its carrier ceiling gains nothing from more diluent. A formula that has no room for more water gains nothing from a diluent that binds it. A short ingredient list gains nothing from a line that exists only to make the scoop heavier. Scale adds a fourth case. A dilution that solves a pilot weighing problem becomes an extra material to test, declare and store once the batch is large enough to weigh the concentrate directly. Choose the grade for the batch size you will run most often, not for the trial. Catalog values are on the amylase product page; pack sizes and lead time are on the MOQ page; and how each form holds activity is on the stability page. ### 02.1 SKB vs DU: what an amylase unit actually means URL: https://nutrition.rainwoodbio.com/products/enzymes/amylase/grades/skb-vs-du/ Reviewed: 2026-11-19 SKB and DU both follow a starch-iodine reaction, but they are not two names for one scale. Each is fixed by a method text, a calculation factor and a set of conditions, and the two do not convert by arithmetic. A buyer who needs the other unit has to ask for an assay, not a multiplication. In one lineSKB and DU are two dextrinising scales with different definitions, so a figure in one becomes comparable only when both assays are run on the same sample. ## Two scales from one observation Both methods watch iodine colour as starch is thinned: the paler the colour, the further the reaction has gone. Standardised versions of each add excess β-amylase to sharpen that colour change. What separates the scales is the arithmetic that turns a time into a number — how much starch, which colour reference, and what constant or rate definition is applied. How the two scales are built | Scale | Definition | What is timed | Typical setting | SKB | Dextrinised starch × method factor ÷ (sample × time) | Iodine colour matched to a reference | Fungal amylase trade and cereal laboratories | DU | 1 g of starch dextrinised per hour at 30 °C and pH 4.8 | Iodine colour at a defined endpoint | Some food-enzyme monographs and supplier specifications | Units/g | Unspecified | — | Not comparable to anything The last row is a warning rather than a definition. "100,000 units per gram" with no substrate, temperature or endpoint cannot be checked at goods-in, and every method above would return a different number for the same powder. ## The 1939 cereal method The letters stand for Sandstedt, Kneen and Blish, who published the method in 1939 for cereal amylase. A diluted enzyme charge acts on soluble starch at 30 °C and pH 4.8, with excess β-amylase present in the standardised versions, and portions are compared with an iodine colour standard until the endpoint is reached. Time, starch charge and sample weight are then converted through the method's factor. Modified versions of the original are in circulation, and they do not all share a reference colour or a factor. A certificate should therefore name the version as well as the letters. Because the unit is small, concentrates are quoted in six figures: 100,000 SKB/g is an ordinary commercial activity for a fungal preparation. ## A name with several definitions One widely used definition makes the DU the amount of alpha-amylase that dextrinises soluble starch at 1 g per hour at 30 °C and pH 4.8, with excess β-amylase present and the endpoint read by iodine colour. The β-amylase converts fragments as they form, which sharpens the colour change. The name, however, predates any single definition. Brewing laboratories use a DU scale for malt that is a different measurement, and a supplier's house DU can carry its own factor or incubation time. Read "DU/g" as a family of methods and ask for the page that defines it. ## The conversion that does not exist A conversion factor would require the ratio between the two assays to stay constant across preparations. It does not. Both count dextrinised starch, so the numbers often land in the same order of magnitude, and a supplier may quote a factor close to one; that similarity is not a conversion. The constants and the reference colours differ, and the ratio moves with the preparation and the version of the method. Two powders with equal SKB/g can therefore sit at different DU/g. A factor in a catalogue is a typical value for that supplier's product, not a property of the enzyme. What does convert is the total number of units inside one scale: 1 kg at 100,000 SKB/g carries 100 million SKB, and 5 kg at 20,000 SKB/g carries the same 100 million. That arithmetic is exact and useful for ordering; it says nothing about the other scale. When the other unit is required, run the other assay on the lot and state the method. The vocabulary is in the assay glossary entry. ## Units on paper EU rules require the label on a manufacturer's food enzyme to give the activity with its unit, the enzyme name, a food-use statement, the lot and the storage conditions. A number without a unit is an incomplete label; a unit without a method is an incomplete specification. In the United States, activity sits in the specification, not in the nutrition panel; it has no daily value to declare. The ingredient declaration names the enzyme where it functions in the finished food, and the activity lives in the specification and the certificate. In both markets, declare whether the figure is at release or at the end of shelf life. The two are different commitments. Three lines belong beside the number: method reference, assay conditions and basis. With them, a result can be tested at goods-in; without them, it can only be discussed. ## Picking one for a purchase order Specify the unit the buyer can verify. For a fungal alpha-amylase powder dosed into a dry blend, SKB/g on soluble starch is the practical choice: the supply chain for this enzyme already quotes SKB, and the assay measures the dextrinising action the blend is built around. Use DU only when the customer's specification or the market's method is DU-based and the supplier will report it. If both units are required, require both results on the same lot; a converted figure is not a result. Four lines belong in the purchase specification: the unit and its definition, the method reference, the conditions, and the basis. The grade options are compared on the grades page, the certificate reading is on the COA page, the adulteration tests are on the identity page, and the catalog figures are on the amylase product page. ### 03 Amylase activity falls with heat and moisture; the process decides the shelf life URL: https://nutrition.rainwoodbio.com/products/enzymes/amylase/stability/ Reviewed: 2026-11-19 Heat, water and a pH outside the working band are the three ways this enzyme loses activity, and a processing line tends to apply all three at once. A dry powder in a sealed pouch is the stable case; a wet granulate, a warm slurry or a tablet punch is where the loss happens. The shelf life printed on a pack therefore describes a product and its process, not the raw material in isolation. In one lineA sealed foil pouch holds the SKB/g figure; the wet step, the drying heat and the water activity of the blend decide what is left at the end of shelf life. ## The pack is the first barrier Water is the switch. With little free water present, the protein is held still and the reactions that break it down are slow. A sealed foil pouch or a lined drum at room temperature can hold the declared figure for many months, while a pouch left open in a humid room will not: the powder is hygroscopic and takes up water from the air. The loss-on-drying limit of ≤8.0% is a release gate rather than a guarantee about the water that matters. Oven loss and water activity are different measurements, and the loss-on-drying note explains why a passing figure does not describe how the powder will behave in a blend. ## The wet step takes the largest toll Once dissolved, the enzyme is a protein with its structure exposed to water, and the loss rate climbs with temperature and with pH away from the working band. A slurry held warm through a shift can lose a measurable part of its activity before the filling line is reached, and contaminating microorganisms add a second route: their proteases cut the enzyme. A heat step is harsher still. Fungal alpha-amylase from Aspergillus oryzae is a mesophilic enzyme, typically quoted as working between about 45 °C and 65 °C and inactivated by a hold at 80 °C; the figures for this preparation belong in the technical data sheet, because they shift with pH and substrate. Activity removed by a pasteuriser or a hot fill does not come back on cooling, so the charge has to be set for the far side of the step. The pH of a 1% solution, 4.8–5.4, describes how the powder behaves in water. It is not a promise that any wet blend will stay inside the enzyme's working range; a mix that sits well below the band for an hour is outside it. ## Seven ways activity disappears Loss routes and the practical answer to each | Route | Mechanism | Answer | Heat | Protein unfolding; no recovery on cooling | Add enzyme after the hot step, or overage for it | Free water | Mobility returns; hydrolysis and oxidation resume | Low water activity; dry the granule properly | pH shift | Structure changes away from the working band | Buffer the wet mix; check acidic components | Granulation | Water, binder and drying heat in one operation | Low-water binder; short, cool dry | Compression | Local heat and shear at the punch | Direct compression; assay the finished tablet | Metal ions | Iron and copper catalyse oxidation | Check the mineral source; test the blend | Open pack | Humid air enters the headspace | Reseal; desiccant; small sample packs ## Designing the study Three production lots, one assay method, and a sampling plan that covers the storage the product will actually see. Test activity, loss on drying, appearance and microbiology at each point, and report activity as a percentage of the initial value so the trend is visible. Storage arms and the question each answers | Arm | Sampling | Purpose | 25 °C / 60% RH | 0, 3, 6, 12, 24 months | Label life in a temperate market | 30 °C / 65% RH | 0, 3, 6, 12 months | Warmer storage and distribution | 40 °C / 75% RH | 0, 1, 3, 6 months | Accelerated comparison of formulations | Process step | Before and after | Activity removed by granulation or drying Run the arms on the sale pack, not on a laboratory jar of concentrate. A diluted grade in a foil stick has a different carrier load, headspace and fill weight from a drum, and those differences belong in the data. Where a process step is planned, sample across it so the loss is measured rather than assumed. ## The blend can matter more than the store room An acidic fruit powder drops the local pH as soon as water appears. Ascorbic acid with a trace of iron or copper can generate oxidants that attack the protein. Mineral salts can speed up or slow the enzyme depending on the metal, and a reducing sugar in a wet granulation keeps water inside the granule. The formula, in other words, sets the conditions the enzyme will meet. Dry blending and direct compression avoid adding water and heat, which suits a stick pack or a drink mix. Where granules are needed, keep the binder low in water, the dry short and the temperature low, then assay the granule rather than calculating its activity from the powder. The custom processing page describes how a process trial is scoped. The pack finishes the job. A sound foil seal, a desiccant where humidity is high, and a fill weight that limits headspace all slow the loss. A stick pack has far more surface per gram than a drum and is opened once, so pack format belongs in the shelf-life claim. ## From data to a labelled date Take the last time point at which activity remains above the declared minimum, subtract a margin for assay variability and lot-to-lot spread, and write the storage conditions beside the result. The margin is a judgement, and the data should show it was made with room to spare. Three lots are the minimum for a defensible date; one lot can be unusually good. If the pack promises "not less than 100,000 SKB/g at end of shelf life", release has to sit above that figure by enough to cover both the loss and the spread. Storage wording belongs on the pack and on the certificate: dry, closed, away from heat. The delivery terms that depend on shelf life are on the MOQ and ordering page, the release sequence is on the quality page, and the catalog values are on the amylase product page. ### 04 Amylase: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/enzymes/amylase/moq/ Reviewed: 2026-11-19 The ordering unit is 1 kg, because that is the smallest foil pouch the powder can be sealed and coded in, and the 25 kg fiber drum is a multiple of it. Standard 40 mesh powder at ≥100,000 SKB/g ships in 1–7 days; a dilution or a granulated grade is a production step and starts later. A clean quotation usually depends on how completely the buyer describes the activity, the pack and the destination market. In one lineThe minimum is one kilogram because an enzyme is sold by the sealed pack that carries the lot code, and a 25 kg drum is that pack repeated. ## How the 1 kg unit came about The constraint is the package. A pouch has to keep moisture out, survive handling and carry a legible lot code, and those requirements are easier to meet at 1 kg than at 100 g. The same kilogram also happens to be a serious quantity of enzyme: at 100,000 SKB/g it contains 100 million units, enough for many production batches at a charge measured in tens of grams. Above 1 kg, orders are built from 25 kg drums, so 30 kg is one drum plus five pouches rather than a special pack. Buyers needing 5 kg or 10 kg are normally supplied from pouches, and the packing list should show the split, because every unit in the shipment has to carry the lot code printed on the certificate. ## Three shipping units How each unit is built and what it protects | Unit | Build | Contents | Why it matters | Foil pouch | Aluminium laminate, heat sealed | 1 kg | Smallest sealed unit; one lot code each | Fiber drum | Fiberboard with a double polyethylene liner | 25 kg | Open under extraction; reseal the liner | Sample | Sealed pouch from the shipping lot | — | Code matches the commercial pack The pack is a moisture barrier first and a shipping container second. The powder picks up water readily, so the laminate and the drum liner are what preserve the release activity between the filler and the customer's weigh station. A drum left open with the liner folded back will take water from the room, and the figure on the certificate no longer describes what is inside. Storage is dry, closed and away from heat; the stability page explains the consequence of getting it wrong. ## Clock, stock and paperwork Standard powder is quoted at 1–7 days from order confirmation, subject to stock on the day. A lower-activity dilution or a granulated grade has to be made, so its clock starts when the specification is agreed, not when the purchase order arrives, and a trial quantity normally comes before the commercial one. Documents travel with the lot: a batch COA that shows the activity result, an SDS, a specification sheet and whatever market statements apply. If the documents and the goods carry different lot codes, the paperwork describes a different delivery. Two questions shape most schedules: how much shelf life must remain on arrival, and whether a pre-shipment sample has to be approved before the balance leaves. Both are settled during quotation. ## Six inputs before a firm figure What the buyer should supply with an enquiry | Input | Why it changes the offer | Activity and unit | SKB/g on soluble starch differs from DU/g or an undefined unit | Quantity and pack | Pouches, drums, or a split delivery | Form | Powder, granule, or a dilution to an agreed activity | Strain statement | Supports the identity file and the market dossier | Documents and market | EU, US or UK file; label language | Delivery and shelf life | Incoterm and the months that must remain on arrival Quoting "amylase 100,000" without a unit is the usual reason an offer has to be rebuilt, because the unit is the specification on an enzyme. Say also whether the figure is release activity or activity at the end of shelf life; the two call for different release targets. ## Making the sample earn its keep Request material from the lot that will ship, lot code on the pouch, and put it through the tests the specification calls for. The buyer's own SKB assay comes first; moisture, solubility and blend behaviour follow. A sample that merely reproduces the certificate has added nothing. Size the sample for the process trial as well as the bench. A granulation or tablet run on a few grams will not reveal the loss that a pilot run reveals, so the quantity should be chosen with that trial in mind. Keep a sealed portion for as long as the claim lasts; the retained-sample note explains the purpose. ## Clauses that prevent surprises Five clauses are worth agreeing before the first order. Set the minimum per shipment, not per order, since a 1 kg minimum and a 25 kg drum do not always align. State the shelf life that must remain at delivery, in months from the release date. Fix the retest date and say what happens if the buyer stores material beyond it. Add change control: a new strain, carrier or assay method is a different material and needs notice before shipment. Then list the documents tied to every lot, including the allergen and genetically modified organism statements the market asks for. Delivery terms, packing list format and label language can sit in the same schedule. The catalog values sit on the amylase product page; the MOQ glossary entry defines the terms; the logistics page covers freight and documents. ### 05 Where fungal alpha-amylase is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/enzymes/amylase/compliance/ Reviewed: 2026-11-19 Three markets, three routes. In the EU the governing instrument is Regulation (EC) No 1332/2008, but its Union list is not yet in force, so national rules fill the gap; in the United States the file rests on a GRAS position, a pre-1994 dietary ingredient basis or a processing-aid rationale; in Great Britain the assimilated EU regime runs through the Food Standards Agency. The paperwork differs by market. The questions a reviewer asks do not. In one lineA food enzyme file is judged on the organism that made it, the carrier it sits on and the use it is authorised for; the SKB/g figure is only one line of it. ## What counts as a food enzyme Under Regulation (EC) No 1332/2008, a food enzyme is a product of plant, animal or microbial origin that carries one or more catalytically active enzymes and is added to food to perform a technological function. A preparation is that enzyme combined with additives or food ingredients used for storage, sale, standardisation, dilution or dissolution. The legal unit is therefore not "amylase" in the abstract but this strain, on this carrier, for this use. That is why a change of strain, carrier or intended use restarts the assessment. The organism named here is Aspergillus oryzae, a filamentous fungus long used to produce food enzymes, and the strain designation is part of what a dossier identifies. ## European Union: a list still in progress Regulation (EC) No 1332/2008 provides the authorisation framework, Regulation (EC) No 1331/2008 the procedure, and Commission Regulation (EU) No 234/2011 the implementing detail. The Commission is assembling a Union list of authorised food enzymes; as of this review that list has not been adopted, so national provisions continue to apply under the transitional regime. Once the list is in force, only listed enzymes may be used for the listed purposes. For that reason, "amylase is permitted in the EU" is too broad a statement to file. The workable question is which entry covers this preparation, from which strain, in which food and at what level — and the answer has to come from the current text, not from a supplier's summary written years ago. Labelling follows the same regulation: a food enzyme sold to a manufacturer carries its name, a food-use statement, the activity and its unit, the lot and the storage conditions. Note also that Directive 2002/46/EC, which harmonises food supplements, lists vitamins and minerals rather than enzymes. A supplement label does not by itself make the enzyme lawful; that rests on the food enzyme or food ingredient route. ## United States: three possible bases There is no premarket approval list for food enzymes as such. A preparation can reach the market under a GRAS conclusion notified in a GRAS notice, or as a processing aid — present during manufacture without a technical effect in the finished food. A dietary supplement ingredient rests on one of the DSHEA bases: marketing before 1994, a new dietary ingredient notification, or a GRAS position. The basis decides the label. Where the enzyme functions in the finished food it is an ingredient and is declared by common name under 21 CFR 101.4; where it qualifies as a processing aid at an insignificant level, 21 CFR 101.100(a)(3) exempts it. The supplier's basis belongs in the buyer's file, because the hazard analysis under 21 CFR 117 depends on it. Two practical questions remain: whether the production strain is genetically modified, and whether the lead result triggers a California Proposition 65 warning. Documents answer both; the certificate alone does not. ## Raw-material limits and finished-food exposure The catalog sets Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg, with APC ≤10,000 cfu/g, yeast and mould ≤100 cfu/g, and E. coli and Salmonella absent. These are limits on the powder. The enforceable limits apply to the food as sold, and the link between them is the inclusion rate: at 0.05%, lead sitting at the 3 mg/kg limit contributes 1.5 µg/kg to the finished product. Catalog figures and the legal anchor behind each | Parameter | Catalog figure | Legal anchor | Lead | ≤3 mg/kg | EU 2023/915, supplements: 3.0 mg/kg | Cadmium | ≤1 mg/kg | EU 2023/915, supplements: 1.0 mg/kg | Mercury | ≤0.1 mg/kg | EU 2023/915, supplements: 0.10 mg/kg | Arsenic | ≤2 mg/kg | No harmonised EU limit for supplements; buyer sets one | Microbiology | APC ≤10,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Finished-product specification, not a legal maximum Exposure is concentration multiplied by intake, so a compliant raw material can still be too much of a metal in a product with a high inclusion rate. The EU market note follows the contaminant instrument. ## The boundary on the label Enzyme activity is a technological parameter, not a nutrient amount: there is no reference intake and no daily value to declare against it. A label or a page may state that the product contains fungal alpha-amylase at a declared activity and that the enzyme serves a technological purpose in manufacture. It may not turn the activity into an effect on the person taking the product. That rule holds for these pages too. No health, structure-function or disease-related claim is made for this enzyme; the editorial policy records the position. ## Seven documents and their authors The file a food enzyme buyer should hold | Document | Issuer | What it proves | Batch certificate | Manufacturer | Activity result, method, contaminants, lot | Specification sheet | Manufacturer | Release limits, unit definition, assay reference | Safety data sheet | Manufacturer | Hazards, dust controls, transport classification | Strain and source statement | Manufacturer | Species, strain designation, culture collection | GMO statement | Manufacturer | Whether the strain is modified | Allergen and carrier statement | Manufacturer | Carrier identity, fermentation residues | Authorisation or basis statement | Supplier or regulator | Union list entry, GRAS notice, processing-aid rationale or GB route ## Six questions for the file Which strain, by designation? Which route or basis, with a reference? Which carrier? Which unit, defined by substrate and conditions? Which contaminant limits, by which method? Which label wording, in the language of the market? A file that answers those six can be reviewed quickly, and one that cannot will generate correspondence. The strain and activity answers are worked through on the identity page; the pack and document flow on the MOQ page; market notes under US and UK; and the catalog specification on the amylase product page. ### 06 How we prove an amylase lot has the declared activity URL: https://nutrition.rainwoodbio.com/products/enzymes/amylase/identity/ Reviewed: 2026-11-19 Identity for an enzyme lot is built from four independent checks: the preparation, the assay, the protein and the paper trail. The activity figure is only the second of those. A number can be correct while the powder has been diluted, while the assay behind it differs from the one in the specification, or while the certificate belongs to another drum. In one lineA declared SKB/g is a claim about one assay on one powder; the organism, the protein and the lot code are what turn that number into an identity. ## Four checks on one gram The preparation is the material itself: a powder from Aspergillus oryzae, CAS 9000-90-2, standardised to a declared activity on a named carrier. The assay is the measurement, with its starch, temperature, pH and endpoint written down. The protein is what the rate depends on, and the paper trail is the certificate, lot code, retained sample and strain statement that connect all three to the pack in front of you. What each check rules out | Check | What it rules out | Evidence | Preparation | A different material under the same name | Species, CAS, carrier, form | Assay | A figure produced by a different method | SKB result, starch, conditions, endpoint | Protein | Dilution or inactivation behind a normal number | Protein content, specific activity, pattern | Paper trail | A genuine certificate for the wrong lot | Lot code on COA, pack and sample ## The dextrinisation assay as evidence A diluted portion of the powder is added to soluble starch at 30 °C and pH 4.8, and the mixture is checked against an iodine colour standard until the starch has been dextrinised to the endpoint. The elapsed time, the starch charge and the sample weight go into the method's calculation, which returns units per gram. A blank and a standard preparation show that the reagents behaved as expected. Each step can drift: a new starch lot, a re-made colour reference, a bath a degree warm or a short pipette all move the result. Two laboratories can print the same "100,000 SKB/g" under different conditions, so the method reference has to travel with the number. The assay is also the soft spot for adulteration. Dextrins already in the extract shorten the time to the colour endpoint, so a powder extended with a dextrin-rich carrier can read above its enzyme content. The blank is what makes that visible. ## Two ratios that keep activity honest Measured activity divided by declared activity is the first ratio to read. A 100,000 SKB/g label with a 104,000 SKB/g result is 104% of label; the figure shows how far the lot sits above the declared floor, not whether it is a different enzyme. The second ratio is as-sold to dry basis. At 8.0% loss on drying, the dry-basis activity is about 8.7% above the as-sold figure. Compare like with like: an as-sold result against a dry-basis limit can fail a conforming lot. Neither ratio identifies the protein; both show that the declared number and the powder are measured on the same terms. ## The limits of an SKB figure SKB is a rate, not a purity and not a protein content. The figure is per gram of powder as sold, so a dilution can carry the same specific activity and half the units per gram. The assay also counts one action: alpha-amylase hydrolyses α-1,4 bonds within the starch chain, and a dextrinisation endpoint reports that endo activity rather than any glucoamylase or pullulanase in the preparation. None of this makes the unit weak; it makes it specific. The SKB and DU comparison shows what happens when a buyer uses two unit names as if they were interchangeable. ## Protein, specific activity and the strain Protein is read colorimetrically against a bovine serum albumin standard. Activity divided by protein gives specific activity in SKB per milligram, and that ratio survives dilution while the absolute figures fall. It is therefore the quickest way to tell a concentrate from an extended powder. The ratio also flags two opposite faults. High protein with low activity points to an inactivated enzyme or to added non-enzyme protein. Low protein with normal activity points to a purified preparation, which is a different product and should be sold as one. The strain statement completes the section: Aspergillus oryzae is the species, and the designated strain is what a buyer can audit. ## Why XRD does not identify an enzyme X-ray diffraction is not an identity method for amylase preparations. The enzyme is a protein dried onto a carrier; the powder is amorphous: a diffractogram shows broad halos rather than the sharp reflections of a crystalline solid. Any crystalline signal belongs to the carrier or to an inorganic filler, not to the enzyme, and a clean pattern says nothing about activity. XRD can answer one narrow question — whether a crystalline mineral phase is present above the detection limit. Identity is carried by the activity assay, the protein figure and the strain statement, with a heat-hold activity check as functional evidence. A supplier who offers XRD as the identity test should be asked for those instead. ## Six ways the claim can fail Failure signatures and the test that reveals each | Failure | Signature | Test | Dilution with carrier | Activity and protein both below the declared level | Paired activity and protein | Dextrin added | Activity reads high, protein normal | Blank, specific activity, sugar screen | Another amylase | Plausible SKB/g, different heat behaviour | Heat hold, protein pattern, strain statement | Heat-inactivated lot | Normal appearance, low activity per protein | Activity against protein | Carrier swap | Specification sheet unchanged | Carrier identity, change notice | Lot mix-up | Codes do not meet across documents | Lot code on pack, COA and sample Dilution and dextrin addition pull the activity in opposite directions, so the pair of numbers separates them: 100,000 SKB/g at 2% protein and 100,000 SKB/g at 10% protein point to different preparations. For substitution, a heat hold is a fast discriminator, because bacterial alpha-amylases survive temperatures that inactivate the fungal enzyme. ## Specification lines that can be tested Eight lines: activity with unit and method; protein or specific activity; loss on drying at ≤8.0%; particle size, ≥95% passing 40 mesh; carrier identity; organism and strain; labelled basis; storage statement. Write the activity as "not less than" and keep the method appendix under change control. Then name the identity test applied to a new lot — the strain statement, a protein pattern against a reference, or both — so identity is routine rather than a response to an odd result. The specification glossary entry covers the terms. ## Five questions, and what good answers look like Which strain produced the lot? What does SKB mean in your assay, and what are the starch, temperature, pH and endpoint? What are this lot's activity and protein figures, and the specific activity? What test shows that the powder is not a dilution, and will you run it? Which document carries the lot code that matches the pack? Written answers to all five give a buyer something to audit. An answer to the third alone gives a number, which is the easiest layer to produce and the hardest to verify. The catalog values are listed on the amylase product page; the quality page describes the release checks behind those answers. ### 01 What the COA for lactase actually contains URL: https://nutrition.rainwoodbio.com/products/enzymes/lactase/coa/ Reviewed: 2026-11-19 A lactase certificate is short: seven release parameters, one activity figure and a lot code that ties the page to a pack. It is a report of measurements, not a list of promises, so the ALU row has to name the substrate, the pH, the temperature and the time, or nobody can check the number. The values below are the catalog specification; a batch COA reports what one lot actually measured. In one lineOne ALU is defined by the assay that measures it, so the certificate has to say which assay produced the figure in ALU/g. ## Seven rows, and what each one decides Six rows are release checks that a lot passes or fails; the seventh, appearance, describes handling rather than identity. Release specification · lactase powder from Aspergillus oryzae | Parameter | Method | Release limit | Appearance | Visual | White to light brown, free-flowing powder | Lactase activity | Chromogenic assay on ONPG, ALU/g | ≥100,000 ALU/g | pH (1% solution) | Potentiometry | 3.0–8.0 | Loss on drying | Gravimetric | ≤8.0% | Particle size | Sieve analysis | ≥95% through 40 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤10,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent Two rows deserve a second look. The pH window of 3.0–8.0 is broad enough that most powders, carrier included, fall inside it, so it catches gross error rather than describing behaviour. The microbiological row pairs a count with two absence tests, and an absence result is only as good as the enrichment behind it. ## Where the ALU/g number comes from Activity is the only row that needs a definition, because the unit exists only inside a procedure. The assay dilutes a weighed sample into a range where the reaction is linear, adds o-nitrophenyl-β-D-galactopyranoside buffered at pH 4.5, holds it at 37 °C, stops the reaction and reads the yellow o-nitrophenol near 420 nm. Absorbance goes through a standard curve to micromoles, and the result is divided by incubation minutes and by the grams of powder in the tube. What the certificate must state for the activity to be reproducible | Element | Typical entry | Consequence if it is missing | Unit | ALU per gram of preparation as sold | A figure per gram of protein would mean something else | Substrate | ONPG at a stated molarity | A lactose-based assay cannot be compared with it | pH | 4.5 | Activity at pH 6 is a different number | Temperature | 37 °C | Rate changes with temperature, and sharply near unfolding | Time | 15 minutes | Only part of the reaction course is linear | Standard | o-Nitrophenol, micromolar | The curve sets the scale of the whole result | Basis | As-is, or dry-solids corrected | Moisture shifts the per-gram figure The number is not a purity: a gram of powder holds enzyme, fermentation residues, carrier and water, and the assay counts only the enzyme. Activity per milligram of protein is the way to see past the carrier, as the identity page sets out. ## A floor is not a result The release limit is written as ≥100,000 ALU/g, which means the assay has one boundary: below it the lot fails, above it the lot is released. A powder at 102,000 ALU/g and one at 165,000 ALU/g would both pass the same specification, which cannot tell a formulator which of the two is in the drum. That is why the measured figure matters. It shows how much activity the lot carries beyond the floor, which is the margin available for a process that will consume some of it. A result column that repeats ≥100,000, or a single word "conforms", leaves the buyer with a release decision and no data. Three lines belong beside it: the release date, the storage condition assumed, and whether the figure is guaranteed at release or at end of shelf life. Activity declines slowly in a sealed pack, so a lot shipped late in its life arrives below the number on the page. Add the assay's repeatability: where the relative standard deviation is wide, a lot a few percent above the floor may fail another laboratory's retest. ## Why two lots carry different figures Fermentation is a biological process, and the amount of β-galactosidase secreted by Aspergillus oryzae moves with the strain, the medium, the induction and the point of harvest. Downstream, recovery and ultrafiltration decide how much of that protein reaches the concentrate, and blending with carrier sets the activity per gram. When a supplier promises ≥100,000 ALU/g, the promise is about where in that sequence the final blend lands. Drying and milling then act on the figure: more residual water lowers the units per gram even when the catalytic capacity is untouched, and heat from a mill can destroy activity before the sieve is reached. Colour tracks the same history and is the least quantitative signal on the sheet; a darker lot may have met every limit. The method is the last variable. Change the substrate lot, the buffer strength, the incubation time or the standard curve, and two certificates headed ALU/g stop being comparable; such drift shows as a shift in the mean across lots, not as one outlier. ## The independent assay, and when to buy one Four occasions justify the fee: a new source, a disputed result, any claim that rests on the activity figure, and a first shipment into a market where the buyer has no history. The panel is short: protein, moisture, microbiology, heavy metals by ICP-MS, a protein pattern by gel, and activity run by the buyer's own method. For the comparison to mean anything, the laboratory has to run the specification's substrate and conditions, not its own house method. Metal results need a detection limit beside each "not detected", because the limit describes the method and not the powder. The sample tested should be the retained sample, and the lot code should appear on the test request as well as on the report. ## Two quotations, six lines Lines that decide whether two lactase offers describe the same powder | Line | What to ask for | Unit and definition | ALU/g with the written definition and the method reference | Assay conditions | Substrate concentration, pH, temperature, incubation time | Measured activity | The release result for the lot, not only the limit | Protein | Protein content and ALU per milligram of protein | Physical data | Loss on drying and the sieve fraction | Carrier | Identity and allergen status of the standardising agent Offers that match on ALU/g and diverge on the rest are not the same material, and the gap appears at the first blend trial. The paper trail matters as much: one lot code across certificate, pack and retained sample, and a named organism and strain, since the source is part of what a food enzyme is. The catalog figures are listed on the lactase product page; the difference between ALU and an FCC lactase unit is set out on the unit comparison page; the release sequence behind the certificate is described on the quality page; and the terms are defined in the COA glossary entry. ### 02 100,000 ALU/g or a dilution: choosing a lactase grade URL: https://nutrition.rainwoodbio.com/products/enzymes/lactase/grades/ Reviewed: 2026-11-19 Three decisions make a lactase grade: how much activity sits in a gram, what carrier was used to get there, and what the particles look like. A 100,000 ALU/g preparation and a 25,000 ALU/g dilution can put the same number of ALU into a batch, but they change how much powder is weighed, how much carrier enters the formula and how the blend behaves on a filling line. The catalog grade is ≥100,000 ALU/g at 40 mesh; lower-activity dilutions and a granulated form are made to order. In one lineChoosing a lactase grade is choosing how many ALU arrive in each gram of the blend, and which carrier arrives with them. ## A grade is a concentration, not a purity An enzyme preparation is not sold as a percentage. The active substance is a protein in a fermented broth, and the powder around it is there to carry, protect and standardise that protein. A grade is therefore a concentration: how many ALU the supplier guarantees in each gram of the material as sold. Concentration is set at the end of the process, not the beginning. The fermentation and the recovery produce a concentrate of whatever strength the run delivers, and the concentrate is then blended with a carrier — usually maltodextrin for a food enzyme — until the target activity is reached. Two packs at 25,000 and 100,000 ALU/g can come from the same concentrate; the difference is how much carrier was added. That is why the carrier belongs in the grade description and not only in the specification footnotes. ## Four options and their arithmetic Grade options and what each one changes in a formula | Grade | Powder to weigh for 1,000,000 ALU | Carrier in that mass | Where it fits | 100,000 ALU/g powder, 40 mesh | 10 g | Low share of the mass | Concentrated blends, small stick doses | 50,000 ALU/g | 20 g | About half the mass | Blends where 10 g is hard to distribute | 25,000 ALU/g dilution | 40 g | About three quarters | Low-activity blends, better weighing accuracy | Granulated, 100,000 ALU/g | 10 g | Low share, plus binder | Dust-controlled rooms, free-flowing lines The arithmetic is linear and exact: halving the activity doubles the mass for the same unit count. What is not linear is everything the extra mass brings — carrier solids in the stick, a larger fill volume, more powder to move through the room, and a bigger share of the label's ingredient list. ## Mesh, flow and airborne dust The catalog powder is sieved so that ≥95% passes 40 mesh: free-flowing, not a flour. Mesh matters for two reasons: it sets how the powder behaves in a ribbon blender or a loss-in-weight feeder, and it sets how much dust becomes airborne when an operator opens the pack. Enzyme powders are respiratory sensitisers, so the dust question is a control question, and a coarser granule is one answer to it. Granulation is not free. A granulated grade is built by agglomerating the powder with a binder and drying it, and that wet step is exactly the kind of process that costs activity. A granulated 100,000 ALU/g grade therefore starts from a stronger concentrate than a plain powder of the same declared activity, and the certificate should confirm the activity after granulation rather than before it. Colour is a weak signal. The colour range runs white to light brown; a darker shade can result from a hotter dry or a longer hold, with the assay still passing. Judge flow from the particle size and mesh data, and check the batch record before rejecting on colour. ## Working back from the blend Start from the activity the finished blend must carry per gram or per unit, then divide. If a blend is specified at 1,000 ALU/g, one gram of the 100,000 ALU/g powder goes into 100 g of blend. The same blend built from the 25,000 ALU/g dilution needs four grams of powder for the same 100 g. Both are correct: the dilution is easier to weigh at small batch size, and the concentrated grade keeps the stick fill weight down. Weighing accuracy is the hidden variable. A 2 g batch addition on a balance that reads to 0.01 g carries a 0.5% error; the same absolute error on a 0.2 g addition is 5%. Where the dose per unit is small, the dilution buys accuracy at the cost of mass. Where the stick fill weight is already tight, the concentrated grade buys space at the cost of weighing precision. Then add the process margin. Activity is lost in a wet or hot step, so the blend is usually dosed above the label figure. The overage is easier to control with the concentrated grade, because the same absolute loss removes a smaller share of a larger number. ## What a grade description must contain A grade description that can be checked names the activity, the unit, the carrier and the form. "Lactase, ≥100,000 ALU/g, 40 mesh, maltodextrin carrier" is a grade; "lactase powder" is a category. Then add the method by reference, the moisture limit, the sieve fraction and the basis of the figure, whether at release or at end of shelf life. Two lines are worth adding for blends: the activity after the process step the buyer will run, and the carrier's allergen and GMO status. The first is measured on a trial blend, not assumed from the raw powder; the second is a document, not a number. The COA page shows where those lines sit on the certificate. ## Where a dilution costs more than it saves A dilution is the wrong grade when the carrier load breaks the formula: a capsule or a small sachet has a fill weight it cannot exceed, and four times the powder may not fit. It is also wrong when the analytical method cannot read the diluted blend — if the finished-product assay's limit of quantification sits near the expected activity, a 25,000 ALU/g material leaves little signal above the noise. It is the wrong choice when the room is the problem rather than the scale. If dust is the reason for looking at a dilution, a granulated grade of the same activity solves the dust without changing the mass. And it is wrong when the extra mass has to be shipped and stored: carrier is weight, and weight is freight, warehouse space and disposal. The unit itself is the last check. If the buyer's specification is written in FCC lactase units rather than ALU, the grade comparison is not a dilution question until the units are reconciled, which is the subject of the ALU versus FCC LU page. Processing losses are set out on the stability page, and the catalog figures are on the lactase product page. ### 02.1 ALU vs FCC LU: what a lactase unit actually means URL: https://nutrition.rainwoodbio.com/products/enzymes/lactase/grades/alu-vs-fcc/ Reviewed: 2026-11-19 ALU and FCC LU both come from the same chromogenic chemistry: an enzyme sample is mixed with o-nitrophenyl-β-D-galactopyranoside, the galactoside bond is cut, and the o-nitrophenol released is read as colour. The difference is in the assay each name points to. ALU names the acid-lactase method at pH 4.5 and 37 °C; "FCC LU" points at a monograph family that contains more than one lactase method, so it does not identify a single set of conditions by itself. In one lineA lactase unit is the assay that defines it, so ALU and FCC LU compare only when the method, the substrate and the pH are written beside the number. ## Two labels, several procedures An enzyme unit is a rate expressed in a defined assay. Change the substrate, the pH, the temperature or the time, and the same powder produces a different number under a name that may look the same. That is why a unit abbreviation is not a quantity: it is the short label of a procedure, and the procedure has to travel with it. Both abbreviations in this comparison describe β-galactosidase activity on a chromogenic substrate. Neither describes protein content, purity, or how much activity survives a process step. Those are separate measurements, covered on the COA page. ## The acid-lactase definition One acid lactase unit is the quantity of enzyme that liberates one micromole of o-nitrophenol per minute from ONPG at pH 4.5 and 37 °C, with the reaction stopped after a fixed incubation, usually fifteen minutes, and the colour read against a micromolar o-nitrophenol standard. The result is reported per gram of preparation as sold. The strength of the definition is that it is narrow. ALU is the unit normally used for acid lactase from Aspergillus oryzae, the material specified here, so a figure in ALU/g on a supplier's certificate has a good chance of being comparable with another supplier's figure. The weakness is that pH 4.5 and ONPG are chosen for the assay, not for the application: a blend at a different pH, or a process at a different temperature, will not see the activity the assay saw. ## The Codex family FCC LU is the Food Chemicals Codex's lactase unit, defined in a monograph. The Codex carries more than one lactase monograph: the acid lactase method works on ONPG at pH 4.5 and 37 °C and defines the acid lactase unit, while the neutral lactase method works near pH 6.5 and reports a neutral lactase unit on a different scale. A certificate that says "FCC LU" without naming the monograph has not said which of these it means. What each unit name points to | Aspect | ALU | FCC LU | Where the definition sits | Acid-lactase assay, widely used for A. oryzae lactase | A monograph in the Food Chemicals Codex; acid and neutral monographs differ | Substrate | ONPG | ONPG in both monographs | pH | 4.5 | 4.5 for acid lactase; near 6.5 for neutral lactase | Temperature | 37 °C | 37 °C in the current acid method | Time and readout | Fixed incubation, o-nitrophenol colour | Set by the monograph and its edition | Typical material | Acid lactase powders for supplement blends | Either acid or neutral lactase, depending on the monograph cited The table also hides a smaller variable: editions of the Codex revise methods. A method reference that gives the edition is more useful than a unit name, because it pins the conditions the laboratory actually followed. ## No factor, only a measurement A conversion factor would be a claim that the ratio between two assays is constant across preparations. It is not. Where both methods use ONPG at pH 4.5 and 37 °C, the two figures should be close, and a supplier may use the names as if they were interchangeable; that is a claim to verify, not a rule. Where one method runs near pH 6.5, the enzyme is measured away from the other method's pH, and which figure comes out larger depends on where the preparation's own pH optimum sits. Substrate adds a second variable. An assay on lactose measures hydrolysis of the natural substrate and detects the glucose or galactose released; it is a legitimate measurement, and it is not the same measurement as ONPG. Product inhibition, substrate concentration and detection chemistry all move the result. What does convert is the total unit count. One kilogram at 100,000 ALU/g carries one hundred million ALU; two kilograms at 50,000 ALU/g carry the same total. That arithmetic is exact and useful for blend calculations. It says nothing about the ALU-to-FCC-LU relationship, which only a paired measurement on the same sample can settle, reported with the lot number. ## Writing the unit into documents Where the buyer is a manufacturer and not a consumer, the label must state the activity and its unit, with the name, the food-use statement, the lot and the storage conditions (Regulation (EC) No 1332/2008). The unit in that statement has to be defined somewhere the buyer can read it, and the specification is the natural place. A declaration of "100,000 LU/g" with no method reference is an incomplete label, whichever Codex edition it came from. In the United States the figure is a specification rather than a nutrient: no nutrition panel, no Daily Value. Where the enzyme functions in the finished food, the ingredient list names it; the activity stays in the specification and on the certificate. In Great Britain the assimilated regulation applies in the same shape as the EU rule. On all three markets, the practical requirement is the same: name the unit, cite the method, and state whether the figure is guaranteed at release or at the end of shelf life. ## Choosing the unit for a purchase order For an acid lactase powder dosed into a supplement blend, ALU/g on ONPG is the practical choice. The method is quick, the definition is narrow, and the figure can be checked at goods-in by any laboratory set up for the assay. Specify FCC LU only when the customer's finished-product specification is already written in FCC units, and then name the monograph and the edition so both sides are measuring the same thing. Where a buyer needs both, ask for both figures on the same lot rather than a conversion from a catalogue. A measured pair is data; a factor is a guess with a decimal point. Grade options are compared on the grades page; the identity evidence sits on the identity page; terms are defined in the assay glossary entry; and the catalog figures are on the lactase product page. ### 03 Lactase activity falls with heat and moisture; the process decides the shelf life URL: https://nutrition.rainwoodbio.com/products/enzymes/lactase/stability/ Reviewed: 2026-11-19 A sealed pack of lactase at cool, dry storage holds its activity well; what removes activity is the water and heat a formulator applies after opening the bag. Wet granulation, a drying step, a hot fill, a solution left standing and moisture migrating into a stick all act on the same protein, and each one is measurable. A shelf-life figure therefore belongs to a format, not to the raw material. In one lineDry and sealed, lactase keeps its activity; heat and water in the process decide how much survives to the end of shelf life. ## Sealed and dry: the stable state Dry is the stable state. The catalog powder is specified at ≤8.0% loss on drying, and within that limit the enzyme sits in a glassy, low-mobility matrix where unfolding is slow. The 1 kg foil pouch and the 25 kg fiber drum are moisture barriers first and shipping containers second; a pack that stays sealed and cool sees little change over its declared life. Three things break that state. Moisture ingress through a damaged liner or a pack opened and reclosed in a humid room. Heat above ambient in a warehouse roof or a closed container. And condensation, which is worse than steady humidity because liquid water forms on the powder. A drum moved from a cold store into a warm room should be allowed to reach room temperature before it is opened, or the first scoop takes up water from the air. ## Dissolved: hours, not months In solution the enzyme is far less stable than in the pack. Dilution removes the protective dry matrix, exposes the protein to water activity near 1.0, and lets microbial growth and metal-catalysed oxidation into the same vessel. A lactase solution held at room temperature loses activity within hours to days depending on concentration, pH and hygiene, and the loss is not recovered by cooling afterwards. The pH specification of 3.0–8.0 describes a 1% solution of the powder, and it is a release window rather than a stability window. A liquid blend should be buffered and held cold, and it should be tested for activity at the start and end of its hold time rather than assumed to follow the powder's behaviour. Where a customer wants a liquid format, the shelf life is a matter of days and belongs in a challenge test, not in a transfer of the powder's declaration. ## Six ways to lose activity Loss routes for lactase and the control that answers each | Route | How it acts | Control | Heat | Unfolds the protein; the rate of loss rises steeply with temperature | Keep the powder below the process temperature it was tested at; cool after drying | Moisture | Raises molecular mobility and enables hydrolysis and microbial growth | Moisture-barrier pack, low water activity in the blend, desiccant where needed | pH | Shifts the protein away from its stable range | Buffer the liquid; check acidic actives in a dry blend for local acidity | Shear and foam | Air–liquid interface denatures protein | Low-shear mixing, no unnecessary recirculation | Metal ions and oxidants | Catalyse oxidation of the protein | Sequester metals, avoid oxidising actives in the same premix | Time | Slow loss even in a sealed pack | Declare a shelf life from data, not from a rule of thumb Temperature and moisture interact. A powder held at 8% moisture and 25 °C is not the same material as the same powder at 5% moisture and 25 °C, and a 40 °C excursion on a wet powder costs far more activity than the same excursion on a dry one. That is why accelerated studies run at elevated humidity as well as elevated temperature. ## Designing the study A useful study tests the material in the form the customer will store, at the conditions the customer will meet, with the assay the specification uses. Three lots, because lot-to-lot variation in a fermentation product is real. Assay at release, then at three, six, twelve and twenty-four months, with 25 °C/60% RH and 30 °C/65% RH bracketing the usual ambient warehouse. An accelerated arm at 40 °C/75% RH gives a direction of travel, not a shelf life on its own. Test the finished blend, not only the raw powder, and validate the extraction before trusting the number: an enzyme recovered from a stick that contains citric acid, minerals and a sweetener can read low for reasons that have nothing to do with inactivation. Record loss on drying and water activity beside the activity, because a falling assay with rising moisture is a different finding from a falling assay at constant moisture. ## The blend writes its own stability In a powder stick or a drink mix the enzyme shares space with acids, salts, sugars and flavours. An acidic ingredient can create local low-pH pockets in a poorly mixed blend; a hygroscopic sugar can raise water activity; a mineral premix can supply the metal ions that catalyse oxidation. None of these shows up in a study of the raw powder alone. Tableting has its own arithmetic. Direct compression is a dry, brief event and is usually gentle on activity; wet granulation is the opposite, because the powder meets water and then heat, and the drying step is where most of the loss occurs. A tablet specification written for a dry blend will overstate what a wet-granulated tablet contains. The COA page sets out how the post-process figure is reported. ## From data to a declared life A shelf life is a statement about a package, a storage condition and an activity floor, and all three have to appear together. "24 months at 25 °C with a stated activity floor" is a testable promise; "stable" is not. The declaration should also say whether the figure on the label is the release activity or the end-of-life activity, because the two differ by the loss the pack is expected to take. Where the data do not cover the whole period, the honest options are a shorter declared life, a higher overage with a declared floor, or a retest date — not an extrapolation. The ordering page covers what to ask for at shipment, the quality page describes the release workflow, and the catalog figures sit on the lactase product page. ### 04 Lactase: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/enzymes/lactase/moq/ Reviewed: 2026-11-19 Lactase orders start at 1 kg: one foil pouch, sealed, labelled and certified as a single lot. Above that the order is counted in pouches and drums rather than in kilograms alone, with 25 kg the standard drum. Lead time is 1–7 days, and what a firm quotation needs is a short list of facts about grade, quantity, market and process. In one lineOne kilogram is the ordering unit because the powder is packed and sealed at that size, and everything larger is that unit repeated into a drum. ## Why the pack sets the minimum The minimum follows the pack, not the customer. A food enzyme is released as a lot, and the lot has to be sealed in a container that can be labelled with its own code, sampled for a retained sample and shipped without repacking. One kilogram is the smallest size that does all three at once, so it is the smallest size that can carry a certificate that matches what arrives. That structure is useful to a buyer. A 1 kg order is one lot, one COA and one retained sample, which is exactly what a bench trial or a first production run needs to be traceable. A trial that starts from a hand-filled sample with no lot code cannot be repeated, and a scale-up that begins from an unlabelled bag begins with an argument. ## Pouch, drum and liner Ordering units and their construction | Unit | Construction | What it is for | 1 kg pouch | Foil laminate, heat-sealed, labelled | Trials, small batches, one-lot orders | 25 kg drum | Fiber drum with an inner liner | Production, where the whole drum is one lot | Lower-activity dilution | Same pack, standardised with carrier | Blends that need a larger weighed mass | Granulated grade | Same pack, agglomerated powder | Rooms where dust is the constraint The pack is a moisture barrier, so its condition on arrival is part of the delivery. A dented drum with a torn liner, or a pouch with a failed seal, is a moisture risk even when the certificate is correct. Check the seal and the liner before signing, and store the pack closed, off the floor and away from heat. ## From order to loading dock Inside that window a released lot is picked and packed; a dilution or a granulated grade is scheduled into the next production slot, which can move the date. The confirmation should state the ship date, not only the lead time, because a range is not a promise. Each shipment carries the batch COA, the specification sheet, the safety data sheet and the allergen and GMO statements. Those documents belong to the lot in the box, and the lot code on the certificate should match the code on the pack. Where the buyer needs an original signed certificate or a legalised copy, say so before the order is placed, because that is a paperwork step with its own time. ## Six answers before a figure What to give a supplier before asking for a firm figure | Fact | Why it changes the answer | Activity grade and unit | 100,000 ALU/g, a dilution, or an FCC unit figure; the pack and the assay follow | Quantity and pack | A pouch, a drum or a pallet decides the packing line and the lot | Destination and market | EU, US or UK documents differ, and so does the label statement | Application and process | A dry blend, a stick, a tablet or a liquid sets the grade and the specification | Documents required | COA, SDS, allergen, GMO, strain statement, certificate of origin | Required delivery date | Stock versus made-to-order, and whether a lot can be reserved Most slow quotations are missing the fourth line. A process that includes a wet step needs a specification with a post-process activity figure, and a supplier who is not told about the wet step will quote against the raw powder alone. ## The trial that matters A sample is worth ordering before a drum, and it should be drawn from a released lot with the lot code written on it. Run the activity assay in your own laboratory, or have it run, using the method your specification will use; a result that cannot be compared with the certificate is a result about methods. Then run the physical checks the process depends on: solubility, mesh, flow and dust. The most informative test is the smallest trial: put the sample through the actual process — the blend, the stick, the tablet — and assay the finished article. That single trial exposes the difference between a certificate figure and a process figure, and it is the number the label has to survive. Retain part of the sample for the comparison later, because a dispute is settled by the retained sample, not by memory. ## Four clauses to fix early Four terms do most of the work. The activity basis: is the figure guaranteed at release or at end of shelf life, and what tolerance applies? The lot: can it be reserved, and how long before shipment? The documents: which ones, in which language, signed or plain? And the non-conformance route: who pays for the referee assay, and which laboratory is acceptable to both sides. Two more are worth a line. Storage at the buyer's site is a shared responsibility, so the shipping and storage conditions should be written down rather than assumed. And the retained sample should be kept by both parties for the same period, with the same lot code, so a question six months later can be answered with material rather than with a file. The grade itself is compared on the grades page, the activity after processing is on the stability page, the ordering vocabulary is in the MOQ and lead time entries, a request template is on the RFQ sheet, and the catalog figures sit on the lactase product page. ### 05 Where lactase is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/enzymes/lactase/compliance/ Reviewed: 2026-11-19 Three regimes apply to a lactase preparation sold as a food enzyme, and each asks a different question. In the EU the question is whether the Union list covers this enzyme yet, and which national rule applies until it does; in the United States it is whether the preparation rests on a GRAS position or qualifies as a processing aid; in Great Britain it is the status of the assimilated rule and the Food Standards Agency route. The evidence file looks similar in all three, but the document that carries each point does not. In one lineLactase is a food enzyme, so the file has to prove the source, the carrier and the market-specific authorisation, not only the activity. ## What is actually assessed Under Regulation (EC) No 1332/2008 a food enzyme is a product of plant, animal or microbial origin containing one or more enzymes that catalyse a specific reaction, added to food at some stage of manufacture for a technological purpose. The same regulation defines a preparation as that enzyme formulated with food ingredients to aid storage, sale, standardisation, dilution or dissolution. The carrier in a 100,000 ALU/g powder is exactly that step. The legal object is a preparation, not a molecule: a named strain, a named carrier, a named use. Alter any of them and the description no longer fits. The catalog material is β-galactosidase from Aspergillus oryzae, a fungus with a long record as a production organism, and EFSA's food enzyme panel has assessed β-galactosidase preparations from the species. The strain designation, where one is held, belongs in the identification. ## The European Union: a list still pending The EU route is a list, and the list does not yet exist. Regulation (EC) No 1332/2008 provides for a Union list of authorised food enzymes, adopted through the procedure in Regulation (EC) No 1331/2008, with each entry fixing the enzyme, its source, the foods in which it may be used and the conditions attached. As of this review the list has not been adopted, so the regulation's transitional arrangements leave national provisions in charge of most uses. So the file needs a reference rather than an assurance: which application or assessment covers β-galactosidase from this strain, and which national rule allows the use in the meantime? Record both with the date they were checked, because adoption of the list will replace the national basis. Two labelling layers follow. An enzyme supplied to a manufacturer, not to a consumer, carries the enzyme name, a food-use statement, the declared activity and its unit, the lot and the storage conditions. The finished supplement is separately governed by Directive 2002/46/EC, so the customer's label answers to a second set of rules. ## The United States: GRAS or processing aid There is no premarket list of permitted enzymes. A lactase preparation reaches the US market by one of two documented routes: a GRAS position, either self-affirmed under 21 CFR 170.30 or notified to FDA under the GRAS notice provisions of 21 CFR Part 170, or a processing-aid rationale under 21 CFR 101.100(a)(3). The route decides the label. If the enzyme still acts in the finished food, it counts as an ingredient and is named under 21 CFR 101.4. Where it is present at an insignificant level and has no technical effect, it can stand as a processing aid and stay off the ingredient statement. Keep the supplier's basis in the file: the buyer's hazard analysis under 21 CFR 117 and a supplement operation's cGMP under 21 CFR 111 both depend on it. Two questions come up in every US review: whether the production strain is genetically modified, and whether lead at the specification limit could require a California Proposition 65 warning. Documents answer both; the certificate answers neither. ## Great Britain, and the border inside the UK Great Britain keeps assimilated Regulation (EC) No 1332/2008, and authorisations run through the Food Standards Agency's regulated products system rather than through EFSA. Northern Ireland remains under the EU food enzyme rules through the Windsor Framework. A pack sold in Manchester and a pack sold in Belfast can therefore rest on different authorisations. Confirm the current GB position before a first shipment. ## Three sets of numbers Contaminants appear in three places, and confusing them is a common filing error. The first is the catalog specification: lead capped at 3 mg/kg, arsenic at 2 mg/kg, cadmium at 1 mg/kg and mercury at 0.1 mg/kg, with APC ≤10,000 cfu/g, yeast and mould ≤100 cfu/g and absence of E. coli and Salmonella. These are limits on the powder the buyer receives. The second is the legal maximum in the finished food. Regulation (EU) 2023/915 sets lead, cadmium and mercury maxima for food supplements at 3.0, 1.0 and 0.10 mg/kg as sold. Arsenic has no general supplement maximum in EU law, so the applicable figure depends on the finished product category. The third number is the dose, which connects the first two: 50 mg of powder at the 3 mg/kg lead limit contributes 0.15 µg of lead to a unit, a small fraction of a gram-scale product's limit. Microbiological criteria sit outside that arithmetic: Regulation (EC) 2073/2005 addresses foodstuffs rather than enzyme preparations, so the specification limits are contractual, and the finished product's criteria apply at the point of sale. The EU regulatory note tracks the instruments. ## The activity is not a nutrient ALU per gram is a technological specification. There is no reference intake to set against it and no daily value to express it as; it does not belong in a nutrition panel, and it cannot be turned into an outcome for the person taking the product. A label or a page may say the product contains lactase at a declared activity, and that the enzyme serves a technological purpose in manufacture; it may not attach a health, structure-function or disease-related claim to the activity. These pages make no such claim for lactase, and the editorial policy states the rule they follow. ## Who issues what Papers a lactase food enzyme file is expected to contain | Document | Issuer | Point it proves | Batch COA | Manufacturer | Measured activity, contaminants, lot identity | Specification sheet | Manufacturer | Release limits, unit definition, carrier | Safety data sheet | Manufacturer | Hazard and dust controls, transport classification | Strain statement | Manufacturer | Production organism and strain designation | GMO statement | Manufacturer | Status of the production strain | Allergen statement | Manufacturer | Carrier and fermentation residues | Authorisation reference | Supplier or regulator | Union list status, GRAS basis or GB authorisation ## Six questions for the file review Which strain, by designation? Which authorisation, by reference and date checked? Which carrier, and what is its allergen status? Which unit, defined by substrate and conditions? Which contaminant limits, by method? And which label statement, in the language of the market? A file that answers those six can be reviewed in an afternoon, and one that cannot will not be rescued by a longer certificate. The strain and activity evidence is worked through on the identity page; the market references are collected under US and UK notes, and the catalog specification sits on the lactase product page. ### 06 How we prove a lactase lot has the declared activity URL: https://nutrition.rainwoodbio.com/products/enzymes/lactase/identity/ Reviewed: 2026-11-19 Identity for a lactase lot rests on four kinds of evidence: the production organism and strain, the ALU assay run on the lot, the protein figure that puts activity in proportion to the protein present, and the physical constants on the certificate. The lot code is what ties all four to the pack. No single test proves identity on its own, and a certificate that offers only the activity figure has proved a rate, not a material. In one lineA lot is identified by its organism, its assay and its protein together, and by the lot code that links all three to the pack. ## Four kinds of evidence What each layer of identity can and cannot establish | Layer | Evidence | What it leaves open | Source | Organism and strain, culture collection number | Whether the powder in the pack came from that strain | Activity | ALU/g by the stated method | Whether the activity belongs to lactase or to another galactosidase | Protein | Protein content and ALU per milligram of protein | Whether the protein is the expected one, unless a pattern is run | Physical | Appearance, pH, loss on drying, mesh | Almost everything chemical; these are consistency checks The layers are complementary rather than ranked. A strain statement is a statement about a process, not about a drum; an activity figure can be met by a different enzyme; and colour, pH and mesh describe the preparation without naming it. Put together, and tied to a lot code, they are hard to satisfy with the wrong material. ## Running the assay, not a lookalike The assay is the acid-lactase method: a dilution of the powder is added to o-nitrophenyl-β-D-galactopyranoside in buffer at pH 4.5 and 37 °C, the reaction is stopped after a fixed time, and the yellow o-nitrophenol released is read against a standard curve. The calculation converts absorbance to micromoles, divides by time and by the enzyme charge, and reports ALU per gram of powder as sold. Every one of those steps is a place where two laboratories can diverge: the dilution into the linear range, the substrate concentration, the blank, the stop reagent, the wavelength, the standard. A buyer verifying a lot should run the supplier's written method, not a method with the same name. Assay is a procedure before it is a number, and the certificate should cite the procedure it used. A "lactase assay" run on lactose with glucose detection is a different measurement. It uses the natural substrate and reads product formation indirectly, so its figures do not compare with ALU on ONPG. ## A rate, with limits An ALU is a rate. It says how fast the preparation liberates o-nitrophenol under one set of conditions, and it says nothing about purity, protein content or how the powder will behave in a blend. The specification is one-sided at ≥100,000 ALU/g, so a lot can be far above the floor and still be described by the same figure. It is also not a universal lactase unit. The ALU versus FCC LU page explains why a number in one unit has to be re-measured rather than recalculated, and the COA page shows where the unit definition sits on the certificate. ## Units per milligram of protein Protein is measured colorimetrically against a standard, or by nitrogen determination with a conversion factor that may not suit this preparation. Neither is a purity assay, and both are sensitive to the carrier: maltodextrin contributes mass but almost no protein, so a dilution lowers ALU per gram and protein per gram together. That is what makes the ratio useful. ALU per milligram of protein stays roughly constant when a powder is diluted with carrier, because both numerator and denominator fall together. It moves when the material changes in kind: a different fermentation, a different recovery, or an added enzyme with a different specific activity. Reading per-gram activity against the protein ratio | Observation | Consistent with | Low ALU/g, ratio unchanged | Dilution with carrier; check the carrier declaration | Normal ALU/g, ratio high | A more active concentrate, or an added enzyme | Normal ALU/g, ratio low | Extra non-enzyme protein, or a protein filler | Low ALU/g, ratio low | Inactivation, or a different preparation ## Why diffraction and infrared fall short Buyers who are used to mineral specifications ask for an X-ray diffraction pattern or an infrared spectrum. Neither answers the question here. An enzyme powder is amorphous, so X-ray diffraction returns a broad halo from the carrier rather than a fingerprint of the protein, and an infrared spectrum of a standardised powder is dominated by the carrier and by residual water. Those methods still have a place: diffraction confirms that the carrier is amorphous, and infrared is a quick check on a pure crystalline excipient. For the enzyme itself, the pattern that carries information is a protein gel, where bands separate by molecular weight and an unexpected band is visible. ## Five ways a lot misrepresents itself Failure modes and the test that exposes each | Failure mode | What it looks like | Test that exposes it | Dilution | Activity per gram below declaration | Assay, plus protein and the carrier declaration | Substitution | Activity passes, protein pattern does not | Gel electrophoresis against a reference | Blending active with spent powder | Activity passes at the average; ratio drifts | Assay, protein and pattern together | Inactivation | Low activity with normal protein | Assay against protein; storage history | False activity | Colour at the read wavelength without enzyme | Blank and a zero-time control The pattern is the test most often skipped and most often decisive. A lot that passes the assay but shows extra bands need not be fraudulent — a blend of two preparations looks the same — but it is not the single preparation the certificate describes. ## A specification that can be tested A checkable specification names the activity and the unit, cites the method, states the substrate, pH, temperature and time, and fixes the basis at release or at end of shelf life. It adds protein or specific activity, loss on drying, mesh and appearance, and it requires the certificate to carry the organism and strain and the lot code. Two lines that are usually missing are the carrier's identity and the method's repeatability; both decide whether a result near the limit means anything. ## The five questions Which strain, by designation and culture collection number? Which method, with substrate, pH, temperature and time written out? What is the measured activity of this lot, and what is the protein figure? What does the protein pattern look like against your reference, and can I see it? And which lot code appears on the pack, the certificate and the retained sample? The answers belong in the file beside the certificate. Catalog figures are listed on the lactase product page; the release sequence is described on the quality page; and the dilution arithmetic is worked on the grades page. ### 01 What the COA for nattokinase actually contains URL: https://nutrition.rainwoodbio.com/products/enzymes/nattokinase/coa/ Reviewed: 2026-11-19 A nattokinase certificate reports appearance, activity in FU/g, pH, loss on drying, particle size, heavy metals and microbiology. The activity row is the only line that describes the enzyme, and it is unreadable without the unit definition, the fibrin substrate and the conditions beside it. The values below are the catalog specification; the batch COA confirms a particular drum of nattokinase powder against them. In one lineAn FU figure is a rate measured on a fibrin substrate under one set of conditions, so the certificate has to name the method, the substrate and the basis beside the number. ## The certificate as a test report A certificate can be audited only when every row carries what was measured, the method and the release limit. For an enzyme the activity row needs a fourth element: the assay conditions. Without them, a second laboratory cannot reproduce the result. Release specification · nattokinase powder from Bacillus subtilis natto | Parameter | Method | Release limit | Appearance | Visual | Off-white to light tan, free-flowing powder | Nattokinase activity | Fibrin substrate assay, FU/g | ≥20,000 FU/g | pH (1% solution) | Potentiometry | 6.0–8.0 | Loss on drying | Gravimetric | ≤8.0% | Particle size | Sieve analysis | ≥95% through 40 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤10,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent Read by rows: a lot can pass activity and fail moisture, pH or the heavy-metal panel. ## What the FU/g figure measures FU stands for fibrin degradation unit. One FU is defined by the assay that produces it: a rate of substrate change under stated conditions, not a mass or a purity percentage. The common trade definition is an absorbance increase at 275 nm of 0.01 per minute. Other method sheets use 1 µg of tyrosine released per minute, or a defined lysis area on a fibrin plate. Those are different measurements, and their numbers are not interchangeable. The substrate is fibrin, and that choice defines what the assay sees. A preparation can carry fibrin-directed activity and still contain other proteins from the fermentation, so FU/g describes action on that substrate rather than the content of one molecule. The EU novel-food entry names the unit but leaves the numerical definition to the method of Takaoka et al. (2010). The method reference belongs in the specification, not a footnote. The note on FU and IU sets out the unit question in full. The activity row, element by element | Element | What the certificate has to say | Why it moves the figure | Unit | FU per gram of powder as sold | Per gram of preparation, not per gram of protein | Substrate | Fibrin, in the form the method specifies | A different substrate counts a different action | Temperature | Usually 37 °C, as the method sheet states | A rate at one temperature does not describe another | pH | Near 7.8 in the common method | The same powder reads differently away from the working pH | Detection | Absorbance at 275 nm, tyrosine colour, or lysis area | Three observations, three scales | Basis | As-is, with the loss-on-drying result beside it | Water lowers the activity per gram at unchanged dry solids ## Release limit versus batch result The limit is the gate and the result is what the laboratory measured. They belong in separate columns, with the method and the lot number attached. A result column that repeats the specification is not a result; “conforms” is a conclusion the reader should reach from the numbers. The activity limit is one-sided. A lot just above the floor and one far above it both pass ≥20,000 FU/g; the second gives more headroom for a process step that removes activity. That headroom is a technical choice. Fix the reporting resolution and the acceptance rule, because a result rounded to the nearest 1,000 FU/g against a 20,000 floor leaves a wide band. The release date and storage condition belong on the certificate, because the figure describes the lot at release, not at the end of shelf life. The loss-on-drying result belongs beside the activity, because the result is per gram as sold. A drum received six months after release is bought at the activity it still carries, so say whether the guarantee is at release or at the end of shelf life. ## What moves between batches Fermentation sets the starting point. The strain, the soy substrate, the medium, the induction and the harvest time shift the balance of proteins in the broth, and recovery and purification decide how much of that balance reaches the concentrate. Standardisation then fixes the activity per gram, by blending with a carrier or by selecting a cut. The spread between lots is a process decision as much as a biological one. Drying and milling move the number again. A wetter powder reads lower per gram at constant dry solids, and a milling step that generates heat can remove activity before the sieve is reached. Colour is the least quantitative signal and often the most revealing: a darker tan can follow a hotter dry or a longer hold while the assay still passes. Watch the method as closely as the number. If the substrate, buffer, incubation time or detection step changes between lots, two certificates that both say FU/g are not comparable. The identity page sets out the source and protein checks that sit beside the assay. ## When an outside laboratory is worth ordering An independent test is worth ordering for a new source, a first shipment into a regulated market, a label claim that rests on the activity figure, or a disputed result. The panel is narrow: activity by the buyer's FU method on a retained sample, protein content, loss on drying, heavy metals by ICP-MS, microbiology and a protein pattern by gel electrophoresis. The referee has to run the same substrate and conditions as the specification, or the comparison measures methods rather than powder. Ask for the detection limit on each metal; “not detected” without a limit describes the method, not the sample. The sample tested should be the sample retained, with the lot code on the bag, certificate and submission form. Send the supplier's certificate and the specification to the referee before it starts, so the disagreement is about the measurement rather than the paperwork. ## What to compare between suppliers Supplier comparison · seven lines that have to match | Line | What to ask for | Source | Bacillus subtilis natto, the strain and the soy origin | Unit and method | FU/g, with the substrate, temperature, pH and detection step | Result | The measured value, the release date and the basis | Protein | Protein content or specific activity, with the method | Physical | Loss on drying, pH of a 1% solution and the mesh result | Contaminants | Heavy-metal and microbiological results against limits | Carrier and lot | Any diluent declared, and the lot code that matches the pack Two quotations that agree on FU/g but disagree on the method, source or carrier are not describing the same preparation. The catalog figures sit on the product page, and the vocabulary is in the COA glossary entry. ### 02 20,000 FU/g or a dilution: choosing a nattokinase grade URL: https://nutrition.rainwoodbio.com/products/enzymes/nattokinase/grades/ Reviewed: 2026-11-19 A nattokinase grade is fixed by three things: the activity one gram carries, the material that activity sits on, and the physical form of the powder. The catalog standard is a 40 mesh powder at ≥20,000 FU/g; a lower-activity dilution and a granulated form are available on request. The choice is usually made by dose weight and dosage form before it is made by anything else. In one lineThe grade is the activity per gram plus what carries it, and switching grades changes the powder mass, the carrier load and the label before it changes anything else. ## Why an enzyme has grades but no purity A mineral salt can be sold at 98% or 99% because the assay measures the molecule against everything else in the drum. An enzyme preparation cannot be described that way. The powder contains the enzyme, the remains of the fermentation, and the carrier used to standardise the activity, so the useful description is a declared activity plus the identity of the carrier and the form of the particles. That is why two suppliers can both offer “nattokinase” and mean different materials. One sells a concentrate at ≥20,000 FU/g; the other a diluted powder at a fraction of that figure, carrying several times the mass for the same number of units. Neither is wrong. They are different grades with different jobs, and each certificate has to be read in the same way — the COA page sets out the line-by-line reading. What a grade actually fixes in a formula | Property | What it controls | Where it shows up | Activity (FU/g) | How many units a gram delivers | Dose weight, label claim, overage | Carrier | What the activity is diluted on | Ingredient list, moisture, flow | Particle size | How the powder flows and dissolves | Blend uniformity, dust, mixing time | Physical form | Powder or granule | Dust control, dissolution rate | Source strain | Which organism produced the enzyme | Identity file, regulatory dossier ## The three options side by side The catalog covers a 40 mesh powder at ≥20,000 FU/g, a lower-activity dilution on request, and a granulated form on request. The practical difference between them is dose weight, dust and the amount of carrier that enters the formula. Grade options and what changes when you switch | Option | Activity | Physical form | What changes in the formula | Standard powder | ≥20,000 FU/g | 40 mesh powder | Smallest dose weight; concentrate for blends | Lower-activity dilution | Agreed in the specification | 40 mesh powder | Larger dose weight; carrier becomes an ingredient | Granulated | Agreed in the specification | Granules | Less dust; slower dissolution; check the granulation loss The activity figure is only comparable when the unit is. An FU/g from one supplier and an IU/g from another are not the same measurement, and the page on FU and IU explains why the numbers cannot be converted. ## Powder, mesh and dust The catalog particle size is ≥95% through 40 mesh, which is a free-flowing powder that blends well into a dry mix and dissolves to a clear to slightly hazy solution. Fines are what make it dissolve quickly and what make it dust. Enzyme powders are respiratory sensitisers, so dust is a handling and documentation question: the SDS carries the hazard statements, and the controls are local exhaust ventilation, closed transfer and the right mask. Granulation trades dissolution speed for dust control. A granule wets more slowly, so a drink mix that has to disperse in seconds is usually built on powder, while a plant that handles kilos of enzyme a day may prefer granules to keep the air clean. Whichever form is chosen, the granulation step itself removes activity, and the after-step figure belongs in the specification. ## The arithmetic that decides the grade Units are weight multiplied by activity. A 2,000 FU serving needs 0.1 g of a 20,000 FU/g powder and 0.2 g of a 10,000 FU/g dilution. The units match; the mass, carrier and label entry do not. Moving from the concentrate to a two-fold dilution doubles the powder weight and puts one part of carrier into the blend for every one part of enzyme powder. Weighability is the argument that usually settles it. A 0.1 g charge is routine in a production batch and awkward in a 5 kg pilot, where the balance and the mixing both struggle with a small quantity. A dilution makes the same number of units weighable, while carrying the carrier through the whole formula and into the ingredient declaration. Two cautions sit beside the arithmetic. First, the label claim has to name the basis: activity at release or activity at the end of shelf life. Second, the dilution is a manufacturing step, so the certificate for a diluted grade should show the activity of that diluted lot, not the activity of the concentrate it came from. A diluted lot that is described only by its parent concentrate has no release figure of its own. The dosage form narrows the choice. A hard capsule holds roughly 0.3–0.5 g, so a 2,000 FU serving fits at either activity, while a 10,000 FU serving at 10,000 FU/g starts to crowd it. A stick pack has more room; a tablet is limited by compression and granule flow. Fix the form before the grade. ## How to write the grade into a specification A specification that cannot be tested is not a specification. Six lines make this one testable: the activity with its unit and the assay reference; the carrier identity; loss on drying at ≤8.0%; particle size at ≥95% through 40 mesh; the production organism and strain; and the form, powder or granule. Add the labelled basis — release or end of shelf life — and the storage statement. Write the limit as a one-sided figure (“not less than”) and keep the unit definition beside it, because a change of substrate or assay conditions between lots makes two results incomparable even when both say FU/g. State the carrier even when the grade is undiluted; “none added” is a declaration, and an undeclared carrier is the most common reason two quotations for the same activity do not behave the same way. The catalog values are on the nattokinase product page; the checks that keep a diluted lot honest are on the identity page; the process loss that follows a granulated grade is on the stability page. ## When a dilution is the wrong choice Three situations argue against diluting. A blend close to its carrier limit gains nothing from more maltodextrin or dextrin. A formula with a tight moisture budget gains nothing from a carrier that holds water. A compact ingredient list gains nothing from an entry that exists only to make the powder weighable. There is also a process reason: every extra carrier is another material that has to be dispersion-tested, declared and held in inventory, and a dilution that solves a weighing problem at pilot scale can be the wrong grade once the batch is large enough to weigh the concentrate accurately. The grade should follow the largest batch the formula will run, not the smallest. ### 02.1 FU vs IU: what a nattokinase unit actually means URL: https://nutrition.rainwoodbio.com/products/enzymes/nattokinase/grades/fu-vs-iu/ Reviewed: 2026-11-19 FU (fibrin degradation unit) and IU are both activity units for nattokinase, and they are not two names for the same measurement. FU is defined on a fibrin substrate; IU is defined on a synthetic chromogenic peptide. Each unit is a rate under a named method, so a figure in one unit cannot be converted into the other by arithmetic. In one lineFU and IU are two assay scales on two substrates, so the numbers are not two spellings of one activity and do not convert by a factor. ## Two units, two substrates The table sets out what each name measures. The entries are not ranked: a unit is not better or worse than another, only more or less suitable for the specification that will verify it. What each nattokinase activity unit measures | Unit | Substrate | Definition in trade use | Detection | FU | Fibrin | Absorbance increase of 0.01 per minute, or 1 µg tyrosine released per minute, or a defined lysis area, depending on the method | 275 nm, tyrosine colour, or fibrin plate | IU | Synthetic chromogenic peptide | 1 µmol of p-nitroaniline released per minute at 37 °C | 405 nm | U, undefined | — | — | Not comparable to anything The last row is not a joke. A figure offered as “20,000 units per gram” with no substrate, no temperature and no detection principle is not a specification; it is a number that will be argued about at goods-in. ## FU: a family of methods under one name The definition most often quoted in trade is an increase in absorbance at 275 nm of 0.01 per minute under the assay conditions. That is the method associated with the Japanese supply chain. Other method sheets define one FU as the release of 1 µg of tyrosine per minute, and a fibrin-plate method defines it by the area of lysis in a given time. The three are related in principle — each measures action on fibrin — but they are separate scales, and a number produced by one is not directly comparable with a number produced by another. The EU entry names the unit but leaves the numerical definition to the method of Takaoka et al. (2010), which is why a supplier's method sheet, not the unit label, decides what a figure means. The result is reported per gram of preparation as sold, not per gram of protein and not as a purity percentage. The COA page shows where the method belongs on the certificate, and the identity page explains why the unit is one layer of the identity claim. ## IU: a synthetic substrate, a narrower claim One IU is the amount of enzyme that releases 1 µmol of p-nitroaniline from a synthetic chromogenic peptide per minute at 37 °C, read at 405 nm. The substrate is designed around the enzyme's specificity, so the assay is less likely to count unrelated proteases than a fibrin-based method. That is its advantage and its limit: it measures action on a peptide that stands in for the natural substrate, not action on fibrin itself. An IU figure and an FU figure are therefore answers to different questions. A preparation can be strong on the synthetic peptide and modest on fibrin, or the reverse, because the two assays weigh different parts of the activity. A supplier who reports both is giving two measurements, not one measurement in two units. ## Why there is no conversion factor A conversion factor would need the ratio between the two assays to be constant across every preparation. It is not. Fermentation, recovery and standardisation each change the balance of proteins in the powder, and the two substrates respond differently to that balance. A ratio observed for one preparation belongs to that preparation and that pair of methods; it is not a physical constant. What does convert is the total number of units within one system. One kilogram at 20,000 FU/g carries 20 million FU; two kilograms at 10,000 FU/g carry the same 20 million FU. That arithmetic is exact and useful for ordering and blend calculations. It says nothing about how FU relates to IU. When a customer needs a figure in a unit the supplier does not normally report, the answer is a test, not a calculation: ask for the assay to be run on the lot, in the buyer's unit, with the method and the raw result stated. The vocabulary is in the assay glossary entry. ## What the label and the specification have to say The EU novel-food entry states the activity as 20,000–28,000 FU/g and cites the method, so an EU supplement built on that preparation has a defined unit for the specification. A US label may use FU or IU, but the figure has to name the unit and the basis: activity at release, or activity guaranteed at the end of shelf life. The two are different promises, and a label that does not say which one it makes is ambiguous. An enzyme activity is not a nutrient with a Daily Value, so it does not belong in a nutrition panel as though it had one. The activity lives in the specification and the certificate; the label may state it as a quality characteristic, with the unit. A label that says “IU” over a certificate that reports FU is not a labelling problem to be fixed by arithmetic; it is a specification mismatch. ## Which unit to specify Specify the unit the finished-product specification can verify. For a nattokinase powder dosed into a dry blend, FU/g on fibrin is the practical choice when the supply chain and the certificate are already built around it, because the buyer can compare like with like. Choose IU when the supplier's system is IU-based, when the synthetic substrate is the method the buyer's laboratory runs, or when the narrower specificity of the peptide assay is the point. Whatever the choice, three things belong beside it: the method reference, the substrate and conditions, and the basis. A specification with those three can be tested at goods-in; one without them can only be discussed. The grade options are compared on the grades page, and the catalog figures are on the nattokinase product page. ### 03 Nattokinase activity falls with heat and moisture; the process decides the shelf life URL: https://nutrition.rainwoodbio.com/products/enzymes/nattokinase/stability/ Reviewed: 2026-11-19 Nattokinase is a protein, and its declared activity is the property most sensitive to heat, water and pH. A dry powder in a sealed foil pouch holds activity far longer than the same powder wetted, heated or left open. The process step that adds heat or water usually removes more activity than the storage that follows, which is why a shelf life belongs to a process and a pack rather than to a powder on its own. In one lineA sealed pack holds nattokinase; heat, water and the process step that adds them decide how much activity is left at the end of shelf life. ## The dry powder in its sealed pack At low water activity the enzyme is close to inert: molecular motion is limited, and the reactions that destroy activity need water. The catalog limits — loss on drying ≤8.0% and pH 6.0–8.0 — describe a powder dry enough and neutral enough for ambient handling. A foil pouch or lined drum at ambient temperature holds activity for a long time; the loss over months is small next to one wet process step. Two habits protect that state. Keep the pack closed until the batch is ready; the powder is hygroscopic, and an open pouch in a humid room picks up water quickly. Read the loss-on-drying result as a release gate, not a storage specification; the loss-on-drying note explains what the figure does and does not say. Refrigeration is no substitute for a dry pack: a cold pouch opened in a warm room condenses water on the powder. Moisture feeds microorganisms. The micro specification — APC ≤10,000 cfu/g, yeast and mould ≤100 cfu/g, E. coli and Salmonella absent — is a release gate, not a licence to store damp. ## Once water is added, the clock runs faster In solution the protein is fully hydrated, and activity declines even at room temperature. The pH matters: the catalog solution sits at 6.0–8.0, and moving outside that window, or holding it warm, increases the loss. A drink mix is usually a dry powder, so test the mix, not the drink; a ready-to-drink application needs its own data and hold time. If a process uses a liquid intermediate — a coating suspension, a granulation fluid or a slurry — the time and temperature belong in the process record. A short, cold contact is not an overnight hold, and the activity after the step is what the tablet or granule carries. A wet line not dried before the next run leaves the enzyme in water longer than planned. ## What drives the loss Nattokinase activity · factors and controls | Factor | Effect | Control | Heat above about 45–50 °C | Protein unfolds; the loss is largely irreversible | Keep process temperature low and time short | Water | Mobility, caking, microbial growth | Dry to ≤8.0% LOD, foil pack, desiccant | pH outside 6.0–8.0 | Activity falls away from the working window | Check the matrix pH, not only the powder | Wet granulation | Water plus binder plus drying heat in one step | Low-water binder, short low-temperature dry | Tablet compression | Local heat and shear at the punch | Direct compression; measure activity in the tablet | Metal ions and oxidants | Protein oxidation and loss of activity | Screen the mineral salts and the antioxidant system | Light | Slow contribution | Opaque pack or carton | Time and opening the pack | Background loss; humid air enters the headspace | Real-time data; reseal, desiccant, small packs The table is qualitative: the size of each effect depends on the matrix. ## A stability protocol that answers the question Run real-time storage at the label condition, with an accelerated arm beside it: 25 °C and 60% relative humidity for real time, 40 °C and 75% for the accelerated arm, with points at 0, 1, 3, 6, 12 and 24 months. For a tropical market, add 30 °C and 65% or 75%. The assay is FU/g by the release method, plus loss on drying, appearance and microbiology. Test what the customer buys: the tablet, not the powder, or the sealed stick, not the blend. The press adds heat and shear, and the excipients bring their own pH and water. Where a process step is planned, assay the blend before and after it, so the process loss is measured rather than assumed. Report the result as a percentage of the initial activity as well as the absolute figure. The percentage shows the size of the drop; the absolute figure alone hides whether it came from the material or the starting point. Include a 4 °C control to separate instability from assay drift. Accelerated data is a screening tool, not a shelf-life claim. A lot that loses activity at 40 °C may still be acceptable at 25 °C, and a lot that passes the accelerated arm can fail in real time. The shelf life rests on real-time data for the pack and matrix; the accelerated arm flags a formula early. ## Granulation, tableting and the pack Wet granulation combines the two factors that remove the most activity: water and heat. A water granulation with a hot dry can remove a large share of the activity before the tablet exists, and the loss is invisible in the powder certificate. Dry granulation avoids the water but adds pressure and heat; direct compression avoids both but still exposes the powder to punch heat and shear. Coating is a separate risk. Aqueous film coating wets the tablet and dries it with hot air; an organic coating avoids water but brings solvent handling. Effervescent systems are the least friendly matrix, because the tablet is designed to dissolve in water. Stick packs and sachets are friendlier, provided the foil and seal keep water out. The custom processing page sets out how a trial is scoped. The pack is part of the formula. A foil laminate with a sealed seam, a desiccant where needed and a nitrogen flush for a sensitive blend all change the shelf life. A fiber drum needs a food-grade liner intact at the rim; without it the drum is a shipping container, not a moisture barrier. A pack change is a stability change and needs its own data. ## Assigning the shelf life The label activity is an end-of-shelf-life figure. If the label declares 20,000 FU/g and the study shows 85% retention at the target shelf life, the release target has to sit near 23,500 FU/g for the label to remain true at the end. That is arithmetic, not a batch result; the retention figure comes from the study on that matrix and pack. Where retention is unknown, the shelf life should be short and justified. One lot is not a shelf life: three lots show the spread, and a single lot can be unusually good. The storage statement — cool, dry, sealed — is part of the claim, and a label that promises a shelf life the pack cannot deliver is a specification error. The COA page shows the rows the study follows; the grade page explains why a dilution carries more carrier into the matrix; the ordering page covers the packs. The catalog limits are on the nattokinase product page. ### 04 Nattokinase: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/enzymes/nattokinase/moq/ Reviewed: 2026-11-19 The minimum order for nattokinase is 1 kg, packed in a foil pouch; the standard bulk pack is a 25 kg fiber drum. The kilogram is a trial quantity drawn from a released lot, not a retail pack, and lead time for a released lot is typically 1–7 days. A firm quotation needs six details from the buyer, and a sample should travel with the certificate of the lot it came from. In one lineOne kilogram is the ordering unit because it is the smallest pack drawn from a released lot with its own certificate, and the drum is that same material in a larger pack. ## Why the minimum is one kilogram At 20,000 FU/g, one kilogram carries 20 million FU. At a 2,000 FU serving that is 10,000 servings, which covers a bench batch, a short encapsulation run and a retain sample. The quantity is set by activity, not by mass: a kilogram of a 10,000 FU/g dilution carries half the activity, so a trial that needs 20 million FU needs two kilograms of the dilution and one kilogram of the standard grade. The pouch is drawn from a released lot, not from a separate sample production. The lot code on the pouch should match the certificate and the drum the customer will order next, so the trial and the production run describe the same material. A sample from a different lot proves the material can work, not that the lot on order will. One kilogram is a sale unit with the same specification, certificate and traceability as the drum. A buyer who needs less for a feasibility test can ask whether a smaller draw can be taken from the reserved lot; that is a commercial question, not a change to the minimum. The MOQ glossary entry defines the term and the way it is counted. ## The two standard packs Nattokinase · standard packing | Pack | Net content | Typical use | Foil pouch | 1 kg | Trial, qualification, small batch | Fiber drum | 25 kg | Production, blending, repacking The pouch is the moisture barrier. Nattokinase is hygroscopic enough that the foil laminate, the seam and the reclose feature do more for the shelf life than the outer carton. The drum needs a food-grade inner liner and a lid that seals; a fiber drum without a liner is a shipping container, not a moisture barrier. Ask three questions before the pack is fixed: is the pouch foil-laminated or a metallised film with a lower barrier; is the drum liner food-grade and intact at the rim; is a desiccant used, and where is it placed. The answers belong in the specification, because a pack change is a stability change. Labels should carry the product name, the source and activity, the lot code, the net content, the storage condition and the manufacturer. ## Lead time A released lot is typically quoted at 1–7 days. The range covers the difference between a pack already in stock and one that has to be filled, labelled and documented for a specific order. A change of mesh, a granulated form, a private-label artwork or a destination that needs legalisation can add time; those are production steps, not dispatch delays. The clock should start when the purchase order, the specification and the shipping details are agreed, not when the first email is sent. A date promised before the activity grade and the pack are fixed is a guess. Ask whether the lot is already released or still in production, and what the lead time is measured from. ## What a quotation needs Six details change the answer: - Product and source: nattokinase from Bacillus subtilis natto, CAS 9014-01-1. - Activity: ≥20,000 FU/g or an agreed lower dilution, with the method and the as-is basis. - Quantity and pack: 1 kg pouch, 25 kg drum, or a combination. - Destination and Incoterm: the delivery point and who arranges freight and insurance. - Documents: COA, TDS, SDS, allergen and origin statements, and any customer declaration. - Label and date: standard or private label, artwork status, and the date the material is needed. A quotation that answers only the quantity and the destination is incomplete. The activity grade decides the mass, the documents decide the destination, and the label decides the production step. Send all six in one message and the quote can be firm rather than indicative. ## Samples and the trial A sample should come from the reserved lot with its certificate attached. A pouch without a COA is a powder with a label; the trial cannot be signed off against a specification that is not attached. Ask for enough material to run the activity assay in duplicate, a bench batch and a retain, and keep the retained portion sealed. If the trial will run weeks after delivery, check the storage condition and keep the pouch closed until the day it is opened. Activity is the property being tested, so a sample left open in a warm room is not a fair test of the lot. Record the lot code and the opening date on the trial sheet, because a result without them cannot be tied back to the material. ## Terms worth settling before the first order The purchase order should reference the specification, the activity and its method, the source, the pack and the certificate. The supplier should confirm that the COA travels with the lot, that the lot code matches the pack, and that a retained sample is kept for the agreed period. Payment terms, Incoterms, insurance and destination documents belong in the quotation, not in a later email. Agree what happens if a result falls outside the specification: who tests, which laboratory is the referee, and whether the lot is replaced or credited. Agree the allergen statement for the soy source and the SDS for dust control, because both are part of the file the customer's safety team will ask for. That clause is easier to write before the first shipment than after a disputed drum. The COA page lists the tests the certificate should carry; the stability page explains why the pack is part of the specification; the compliance page lists the documents a destination may ask for. The product page has the catalog specification, and the quality page describes the release workflow. ### 05 Where nattokinase is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/enzymes/nattokinase/compliance/ Reviewed: 2026-11-19 Nattokinase sits between two EU regimes: it is a food enzyme, and a nattokinase-containing fermented soybean extract is an authorised novel food. The US asks a different question, and the UK applies a retained framework. The file must show the route, preparation, soy allergen and claims boundary, not only the CAS number. In one lineNattokinase is permitted through different routes in the EU, the US and the UK, and the file has to show the preparation and the route, not the name. ## Four checks, not one First, may the preparation be used in the intended market? Second, is the specification covered? Third, do the contaminants sit under the ceiling? Fourth, what may the label and claim say? Answering the first leaves three open. “Nattokinase” is not one regulated article. It is an activity that can sit in different preparations, from a high-activity powder to an extract on a carrier. A permission for one preparation does not automatically cover another, so read the specification against the entry. ## European Union Regulation (EC) No 1332/2008 is the food-enzyme framework: an enzyme must be covered by the Union list before sale or use, and the list is built in stages, so national provisions can still govern a use. “Nattokinase is permitted in the EU” is too coarse. The supplement route is Regulation (EU) 2015/2283. The fermented soybean extract was authorised by Commission Implementing Decision (EU) 2017/115 and is now in the Union list under Commission Implementing Regulation (EU) 2017/2470. The EU novel-food entry beside the catalog specification | Parameter | EU entry for fermented soybean extract | Catalog nattokinase powder | Preparation | 30% extract plus 70% resistant dextrin; vitamin K2 removed | Nattokinase powder, 40 mesh, no carrier declared | Activity | 20,000–28,000 FU/g | ≥20,000 FU/g | Loss on drying | ≤10% | ≤8.0% | Vitamin K2 | ≤0.1 mg/kg | — | Heavy metals | Heavy metals ≤20 · Pb ≤5 · As ≤3 mg/kg | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | APC ≤1,000; yeast and mould ≤100; coliforms ≤30; spore-forming ≤10 cfu/g; E. coli, Salmonella and Listeria absent/25 g | APC ≤10,000; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Permitted use | Supplements, capsules/tablets/powder; adults excluding pregnant and lactating women; ≤100 mg/day | Not stated in the catalog | Label | “Fermented soybean extract”; medical supervision statement | Not stated in the catalog That entry is preparation-specific. The catalog material is a nattokinase powder at ≥20,000 FU/g, not the 30/70 extract, so they are not automatically the same article. The file must map the specification to the entry, or establish another route. Labelling follows Regulation (EU) No 1169/2011 and Directive 2002/46/EC, and soy is an Annex II allergen. For that preparation, the label must also state that persons taking medication should only consume the product under medical supervision. ## United States There is no premarket approval list for nattokinase as a dietary ingredient. The route is DSHEA: use before 15 October 1994, a new dietary ingredient notification at least 75 days before marketing, or a GRAS conclusion for the preparation and use. A GRAS conclusion is company- and use-specific; it does not transfer with the name. The finished supplement is made under 21 CFR 111, and the Supplement Facts panel follows 21 CFR 101.36. An enzyme activity has no Daily Value, so it does not belong in the nutrition panel; it lives in the specification and certificate. A structure/function statement needs substantiation and the DSHEA disclaimer, and a disease claim is not permitted. Soy is a major food allergen, so the source is declared under FALCPA. No federal maximum applies to lead, cadmium or mercury in supplements; California Proposition 65 sets warning thresholds, and USP <2232> is a reference some buyers require. The catalog limits are release gates, not a federal ceiling. ## United Kingdom Great Britain applies a retained novel-food and food-enzyme framework. The fermented soybean extract authorisation is the reference for the same preparation, with the 100 mg/day cap and adult population condition; check the GB register before shipping. Northern Ireland follows the EU Union list under the Windsor Framework, so one UK label may not work in all four nations. Supplement rules are the Food Supplements (England) Regulations 2003 and devolved equivalents, with labelling under the Food Information Regulations 2014 and retained Regulation (EC) No 1924/2006. Soy remains an allergen, and the claims boundary is the same: no disease claim, and no health claim unless authorised. ## Contaminant limits Heavy metals · catalog limits and regulatory ceilings | Metal | Catalog limit | EU supplement ceiling | EU novel-food entry | US federal | Lead (Pb) | ≤3 mg/kg | 3.0 mg/kg | ≤5 mg/kg | No maximum | Arsenic (As) | ≤2 mg/kg | No harmonised limit | ≤3 mg/kg | No maximum | Cadmium (Cd) | ≤1 mg/kg | 1.0 mg/kg | — | No maximum | Mercury (Hg) | ≤0.1 mg/kg | 0.10 mg/kg | — | No maximum EU supplement ceilings are in Regulation (EU) 2023/915; GB retains Regulation (EC) No 1881/2006. The novel-food entry also carries a heavy-metals limit of 20 mg/kg. Compare on the same basis: a result per kilogram of powder and a daily-dose limit differ. ## Label and claim boundaries Nattokinase activity is a quality parameter, not a health claim. As of this review the EU register of authorised health claims has no claim for nattokinase, so a label cannot invent one or borrow another ingredient's. The medical supervision statement is a regulatory warning, not a claim. In the US, a structure/function statement needs the evidence file and the DSHEA disclaimer, and a disease claim is not permitted. In the EU and UK only authorised health claims may be used. The soy allergen declaration is a safety statement, not optional; the activity belongs on the specification and certificate, not the nutrition panel. ## The file a brand should hold - Specification naming the source, the strain, the activity and its method, the carrier and the limits. - Batch COA with the FU/g result, method, as-is basis, pH, loss on drying, mesh, metals and micro. - Technical data sheet and safety data sheet, with the source and activity on both. - Novel-food reference and a mapping of the preparation to the entry, or the alternative route. - US dietary-ingredient basis: NDI notification, pre-1994 history, or GRAS conclusion for the preparation. - Soy allergen, GMO, origin and carrier statements, plus contaminant results with methods. - Stability summary, the storage statement and the approved artwork. ## A checklist before the first shipment - Does the specification name Bacillus subtilis natto, the strain, the activity and the assay method? - Is the preparation the one covered by the novel-food entry, or is another route documented? - Is the activity reported on an as-is basis with the loss-on-drying result beside it? - Do the metal results meet the destination's limits on the same basis? - Is the soy allergen declared, with the source and carrier statements in the file? - Does the label carry the required designation and the medical supervision statement where it applies? - Is every claim authorised, or absent? - Do the lot codes match on COA, pack and packing list? The market frameworks are on the EU, US and UK regulatory pages. The COA page breaks the certificate down, the identity page covers source and protein, and the product page carries the catalog limits. ### 06 How we prove a nattokinase lot has the declared activity URL: https://nutrition.rainwoodbio.com/products/enzymes/nattokinase/identity/ Reviewed: 2026-11-19 A nattokinase lot is identified by four layers that have to agree: the natto source, the protein, the FU activity and the lot record. The activity figure is the first check buyers make and the weakest alone: a powder can carry the declared FU/g and still be a different preparation. In one lineA nattokinase lot is identified when the natto source, the protein, the FU assay and the lot record agree, and the activity figure alone carries none of those. ## Four layers, one claim Layer one is the source: Bacillus subtilis natto, the strain, the soy material and origin. Layer two is the protein: protein content and gel band pattern. Layer three is the activity: FU/g by the named method, as-is, with substrate and conditions. Layer four is the record: lot code, certificate, retained sample and audit trail. Identity layers · question and evidence | Layer | Question | Evidence | Source | Is it from Bacillus subtilis natto? | Strain statement, soy origin, supplier declaration | Protein | Is the protein nattokinase? | Protein content, gel band pattern, specific activity | Activity | Does it act on fibrin as declared? | FU/g with substrate, conditions and method | Record | Is this the lot tested? | Lot code, COA, retained sample No layer carries the claim alone. A source declaration without activity describes a fermentation; an activity figure without a source describes a powder; a certificate without a lot code describes no drum. ## The activity assay The assay incubates a dilution of the powder with a fibrin substrate at a stated pH and temperature, stops the reaction, and measures the change — absorbance at 275 nm in the common method, tyrosine colour in another, or lysis area on a fibrin plate. The result is divided by enzyme charge and time to give FU per gram. Blank, duplicate and calibration turn colour into a number. Every step is a variable. A different fibrin preparation changes the substrate, a different incubation time moves the reading along a partly linear curve, and a different detection step changes the scale. Two laboratories can both report “20,000 FU/g” and measure different things, so the method reference belongs in the specification. The assay is not identity. A fungal or another bacterial protease can act on fibrin and return an FU figure. The assay says the powder has fibrin-directed activity, not which protein produced it. ## What FU means, and what it does not The common trade definition is an absorbance increase at 275 nm of 0.01 per minute. Other sheets use 1 µg of tyrosine released per minute, or a lysis area on a fibrin plate. These are not three names for one number; the EU novel-food entry cites Takaoka et al. (2010), a reminder that a unit can be defined by reference to a paper. An FU figure is per gram of preparation as sold, not per gram of protein or a purity percentage. That is why loss on drying sits beside it: a wetter powder carries fewer FU per gram. A certificate saying only “FU/g” leaves the buyer guessing which FU was used. The FU versus IU page sets out the unit systems and the conversion risk. ## Protein, source and strain Nattokinase is a serine protease of about 275 amino acids and 27–31 kDa, produced by Bacillus subtilis natto. The catalog material carries CAS 9014-01-1 and EC 3.4.21.62. The strain matters: “Bacillus subtilis natto” is a fermentation tradition, not a single genetic line, and the file should name it. Soy is an Annex II allergen in the EU and UK and a major allergen in the US, so the source is declared. ## The activity-to-protein ratio Specific activity is FU per milligram of protein, from the same lot as the FU/g result. Dilution lowers FU/g and protein together, so the ratio holds while the absolutes fall; heat damage lowers FU/g and leaves most protein in place, so the ratio falls; added non-enzyme protein raises the denominator without raising activity. Within one grade and supplier it should sit in a stable band. It is a consistency check, not a purity claim, because the protein method counts all soluble protein while the FU assay counts only fibrin-directed activity. ## XRD, and why it is not an identity test here Nattokinase arrives as an amorphous fermentation powder, so its diffractogram is a broad halo with no sharp reflections from the enzyme. XRD cannot distinguish it from another Bacillus protease, confirm the natto strain or measure FU. Peaks that do appear belong to a crystalline carrier, salt or mineral contaminant, describing the formulation, not the protein. Protein crystallography needs a purified single crystal, not a production lot. The identity set here is the FU assay with its substrate and conditions, protein content and specific activity, and an electrophoretic band pattern in the 27–31 kDa region against a reference lot. ## The routes that pass a weak test Adulteration routes · what passes and what detects it | Route | What passes | What detects it | Dilution with carrier | Declared FU/g if the blend is assayed | Carrier declaration, mass balance, specific activity | Other protease | FU/g on fibrin | Protein band pattern, source-specific test | Inactivated powder | Protein content | FU/g and specific activity | Overstated activity | A certificate figure | Independent assay with the named method | Carrier substitution | Specification sheet unchanged | Carrier identity, change-control notice | Mislabelled lot | Certificate belongs to another drum | Lot code on pack, certificate and sample The table is a list of checks, not accusations. Most lots are what the certificate says; a buyer who checks only FU/g has one layer of four. ## How to write the specification - “Nattokinase, enzyme preparation from Bacillus subtilis natto, CAS 9014-01-1, EC 3.4.21.62.” - “Activity ≥20,000 FU/g by the named method, as-is basis, with the substrate, pH, temperature and detection step stated on the COA.” - “Protein content and specific activity reported; band pattern on request.” - “pH 6.0–8.0 in 1% solution; loss on drying ≤8.0%; ≥95% through 40 mesh.” - “Heavy metals Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg; APC ≤10,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent.” - “Carrier and any other enzyme activity declared; no undeclared diluent.” “No undeclared diluent” is doing real work. A lower-activity grade is a legitimate dilution, but the carrier belongs in specification and certificate. The catalog figures are on the product page, and the release workflow on the quality page. ## Five questions for a supplier - Which strain produced this lot, and is the soy material non-GMO? - What exactly does your FU definition mean, and what are the substrate, pH, temperature, time and detection step? - Is the result on an as-is or dried basis, and what was the loss on drying for that lot? - What are the protein content and the specific activity, and what method produced them? - What carrier or other enzyme activity is present, and where is it declared? If the second answer is “the standard method”, ask for the method sheet. If the fifth is “none”, ask for the mass balance. Five written answers give a buyer material to audit; one answer gives a number. The COA page shows where each answer sits; the grades page covers the dilution arithmetic. ### 01 What the COA for neutral protease actually contains URL: https://nutrition.rainwoodbio.com/products/enzymes/neutral-protease/coa/ Reviewed: 2026-11-19 A neutral protease COA is a record for one lot, and most of its rows are routine: colour, pH, moisture, mesh, heavy metals and microbiology. The activity row is different. “≥50,000 U/g” is a measurement whose meaning depends on the assay that produced it, so the substrate, pH, temperature, time and standard have to appear with the number. The limits below are the catalog specification; the certificate is the evidence for a particular drum of neutral protease powder. In one lineThe activity figure on a neutral protease COA is a result from one method, so the unit definition, the casein substrate and the assay conditions have to travel with it. ## What each row has to establish For every parameter, the reader needs to know what was tested, how it was tested and which limit applied. The activity row needs one more item: the conditions of the assay. A certificate that gives the number but not the method records an opinion rather than a measurement. Catalog release limits · neutral protease from Bacillus subtilis | Parameter | Method | Release limit | Appearance | Visual | Off-white to light brown, free-flowing powder | Neutral protease activity | Casein substrate, Folin–Ciocalteu colour; conditions printed on the COA | ≥50,000 U/g | pH (1% solution) | Potentiometry | 6.5–7.5 | Loss on drying | Gravimetric | ≤8.0% | Particle size | Sieve analysis | ≥95% through 40 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤10,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent Look closely at two rows. The activity method cell should point to the unit definition, since U is a rate. The microbiology cell should identify the tests and the sample size; “absent” is only meaningful when the method is named. ## The unit is a rate, and the method defines it A neutral protease unit is not a mass of protein. It measures how much enzyme is needed to produce a stated change in a stated substrate within a stated time. A common definition uses casein at pH 7.0 and 40 °C: one U releases 1 µg of tyrosine equivalent per minute, read by Folin–Ciocalteu against a tyrosine standard. Other laboratories hold pH 7.5 and use 30 °C or 37 °C. Each definition is valid inside its own method; a figure from one cannot be read as a figure from another. The activity entry · what a complete method states | Element | Requirement | Effect if omitted | Unit | U per gram of preparation | A figure per gram of protein is a different quantity | Substrate | Casein, with grade and concentration | Another protein exposes other bonds | pH | The pH used, for example 7.0 or 7.5 | The rate changes across the pH profile | Temperature | 30 °C, 37 °C or 40 °C | The rate depends on temperature | Incubation | Minutes before the reaction is stopped | Only part of the curve is linear | Detection | Folin–Ciocalteu or an equivalent colour reaction | A different chemistry gives a different scale | Standard | Tyrosine, with the lot and the curve | Calibration shifts every result | Basis | As-is, or corrected to dry solids | Moisture changes the denominator Moisture deserves its own note. If the result is as-is and loss on drying is 8.0%, the dry-solids figure is not the same number; the gap is roughly the water content. Ask which basis is printed. Protein and specific activity form a second pair: units per milligram of protein tell a buyer whether the activity comes from a concentrated enzyme or from more powder, and that ratio is rarely printed unless it is requested. ## Where the limit ends and the result begins The limit is the pass mark; the result is the measurement. A certificate that prints only “≥50,000 U/g” under “result” has restated the specification. The actual figure matters because a lot that passes just above the floor has less room for process loss than one that passes well above it, even though both are released. Activity is a one-sided test, so the two lots above are equally compliant. When a result sits near the line, request the raw data: sample weight, blank, absorbance, standard curve and the calculation. Ask for the release date and the shelf-life basis too. A drum that arrives six months after release carries the activity that is left, not the activity measured on release day. ## Why two lots at the same U/g can differ Fermentation conditions set the starting point: strain, inoculum, medium, aeration and harvest time change the enzyme mixture in the broth. The downstream train — recovery, concentration, drying — decides how much of that mixture becomes powder, and the last step is a blend that brings the activity to the declared figure. The spread between lots is therefore partly biological and partly a standardisation choice. Drying and milling add two more variables. A powder with more moisture reads lower per gram at constant dry solids, and a hot mill can damage activity before the sieve is reached. Colour and smell are less precise but still informative: a darker brown or a stronger fermentation note may follow a longer hold or a hotter dryer while the assay passes. The method can drift as well. If the substrate lot, pH or incubation time changes between certificates, both figures may say U/g and still not be comparable. ## When to use a second laboratory Order an outside test for a new source, a first shipment into a regulated market, a claim that rests on the activity figure, or a disagreement over a result. The panel to request: your own activity method run on the retained sample, protein, moisture, ICP-MS metals, a micro count and a gel-electrophoresis protein pattern. Make the outside laboratory follow the specification's substrate and conditions exactly. If it does not, the two results compare methods, not material. A metal reported as “not detected” needs its reporting limit beside it; without that number the line describes the instrument, not the lot. The sample tested should be the sample retained, and the lot code should appear on the certificate, the pack and the laboratory report. ## Six lines for a supplier comparison Compare the unit definition, the substrate and conditions, the measured activity and its method, protein and specific activity, moisture and particle size, and the carrier plus production strain. Agreement on 50,000 U/g is not agreement on the other five lines; the divergence usually appears at the first blend trial. The second question is traceability. A buyer should be able to read one lot code on the certificate, the pack and the retained sample. The certificate should also name the organism that produced the enzyme, since source is part of identity for a food enzyme. The catalog numbers sit on the product page; the grades page covers dilution, the U versus AU note covers the unit, the identity page covers the evidence, and the quality page covers release. ### 02 50,000 U/g or a dilution: choosing a neutral protease grade URL: https://nutrition.rainwoodbio.com/products/enzymes/neutral-protease/grades/ Reviewed: 2026-11-19 The standard neutral protease grade is a 40-mesh powder at ≥50,000 U/g. A lower-activity dilution and a granulated form can be made on request. Each option changes the mass that delivers a unit target, the carrier that appears on the label and the amount of dust in the room. None of them changes the enzyme or the unit. In one lineA grade is a choice of concentration, particle form and carrier; the enzyme and its unit stay the same while the formula and the label change. ## Concentration first, then mass A formula fixes the number of units it needs per capsule or per sachet. The catalog powder supplies those units at 50 U per milligram. If a dilution supplies 25 U per milligram, the same target needs twice the powder. That is the whole arithmetic, and it drives everything else: the fill weight, the number of capsules, the size of the stick pack and the space the enzyme takes in a blend. The concentrate suits a small inclusion, which is usually what a capsule wants. A dilution suits a low unit target or a format that needs bulk, and it can make weighing more accurate because the scoop is larger. Granulation is a handling choice rather than a concentration choice: it improves flow and cuts dust, but it adds a process that can cost activity. If the organism or the unit changes, the offer describes another material, not another grade. ## Three options, one unit definition Neutral protease grades · what changes in the drum | Grade | Activity | What it is | Fits | Watch | Catalog powder, 40 mesh | ≥50,000 U/g | The standard grade; carrier declared on the COA | Capsules, tablets and blends with a small inclusion | Dust, static and small-dose weighing | Lower-activity dilution | Fixed in the specification | Standard powder extended with a named carrier | Stick packs and blends that need more bulk | Carrier declaration; segregation in the blender | Granulated | Same unit definition | Agglomerated particles | Tableting, sachets and low-dust rooms | Heat and moisture from the granulation step The three rows share a source, a unit and an assay. What separates them is concentration and particle structure. A dilution becomes a legitimate grade when the carrier is named and the lower activity is written into the specification; it is not a device for putting a 50,000 U/g label on a weaker powder. ## What the powder does in the room A 40-mesh powder passes openings of about 425 µm. It flows, it raises dust when poured and it carries a static charge that makes small weighings fussy. The dust is a health issue as well as a housekeeping one: enzyme powders are respiratory sensitisers, so local exhaust ventilation or a weighing booth belongs in the process description. Granulation can cut the dust and improve flow, but the binder, the water or solvent, the drying temperature and the post-granulation milling all become part of the specification. Measure the activity after granulation; the base powder's figure does not describe the granule. With a dilution, check the particle size of the blend, not only of the enzyme, because a coarse carrier and a fine enzyme can separate in a hopper. ## Fitting the unit target into the pack Suppose a capsule is specified to carry 10,000 U. The 50,000 U/g powder supplies it in 0.2 g; at 25,000 U/g the same capsule needs 0.4 g. The second fill may be easier to weigh but harder to fit, and the carrier joins the ingredient list. Those are the real trade-offs behind a grade choice, not the size of the number on the certificate. Stick packs and sachets also care about dispersion and mouthfeel, not only mass. A dilution can reduce clumping and help the pack empty cleanly, at the cost of more carrier and a longer declaration. Tablets care about flow and compression; a granulated grade may run where a fine powder bridges, but any aqueous step adds heat and water that the enzyme has to survive. In a blend with other enzymes, changing one component's concentration also changes the blend ratio and the uniformity of the smallest ingredient. ## What the specification should say - “Neutral protease (bacillolysin; EC 3.4.24.28) preparation from Bacillus subtilis, CAS 9025-39-2, ≥50,000 U/g.” - “The U is defined by the casein assay; substrate, pH, temperature, time and standard are printed on the COA.” - “Result reported as-is; loss on drying ≤8.0%; pH 6.5–7.5 in 1% solution.” - “Carrier named and quantified; a dilution is specified separately from the concentrate.” - “Particle size ≥95% through 40 mesh; granulated material to the agreed size.” - “Activity re-measured after granulation, not inferred from the base powder.” A grade change is also a document change. The specification, COA, label, blend calculation and stability summary all move together, while the unit definition stays put. Switching from the concentrate to a dilution without rewriting those documents creates two materials under one name. ## When the answer is to keep the grade Keep the 50,000 U/g grade when the label already declares that figure; diluting it would put the label and the certificate out of step. Keep the powder if it already flows, because granulation adds heat and moisture for no gain. Do not add a carrier that the label or the customer's specification excludes, and do not move to a higher activity if the resulting scoop becomes too small to weigh reliably. Catalog data sits on the product page. The COA page sets out the release lines, the U versus AU page compares the units, and the MOQ page covers packs and order quantities. ### 02.1 U vs AU: what a protease unit actually means URL: https://nutrition.rainwoodbio.com/products/enzymes/neutral-protease/grades/u-vs-au/ Reviewed: 2026-11-19 A protease unit is a rate tied to a method. U and AU come from different methods: U is normally a casein-based unit defined by the supplier, while AU is the Anson unit, normally measured on hemoglobin. The substrate, pH, temperature and the amount of tyrosine counted all change, so one figure cannot be translated into the other. In one lineU and AU are two measurements, not two labels for one quantity; the substrate and conditions behind each one rule out a fixed conversion. ## Two scales and an ambiguous label What each protease activity unit measures | Unit | Substrate | Definition in common use | Usual conditions | U/g | Casein | 1 µg of tyrosine equivalent released per minute | pH 7.0 and 40 °C in the common method | AU/g (Anson) | Hemoglobin | 1 µmol of tyrosine released per minute | pH 7.5 and 37 °C in the classic method | AU/g (house) | Method-specific | A supplier's own activity unit | As stated in the method sheet No international body polices the letter U; each supplier's method sheet supplies the definition. AU usually points to Anson, but a catalogue may use it for a house unit with a different protein or incubation time. A number without its method is not a specification, whatever letter comes before the slash. ## The protein chooses the reaction Casein and hemoglobin differ in sequence, solubility and the peptide bonds they expose. A protease that performs well on casein may perform differently on hemoglobin, and the ratio between the two performances is not constant across preparations. Both assays use trichloroacetic acid to precipitate the intact protein and Folin–Ciocalteu reagent to colour the soluble peptides, so the reading depends on which fragments remain in solution as well as on the rate of bond cleavage. The substrate lot matters too. A different casein preparation, a different degree of denaturation or a different hemoglobin batch can shift the result with no change in the enzyme. That is why the method sheet belongs in the specification and on the certificate, beside the unit. ## Conditions move the number Assay conditions and their effect on the reported figure | Condition | Common settings | Effect on the figure | pH | 7.0 for the casein method; 7.5 for Anson | Activity varies across the pH profile | Temperature | 40 °C for U; 37 °C or 25 °C for AU | Rate rises with heat until the enzyme denatures | Time | 10, 20 or 30 minutes | Linearity holds for only part of the reaction | Amount counted | Micrograms of tyrosine for U; micromoles for AU | The two definitions count different quantities | Detection | Folin–Ciocalteu colour, tyrosine standard | The calibration curve sets the scale Two laboratories can both report U/g and still disagree, because each chose different settings inside the same family. That is a property of rate assays, not a sign of bad faith. The remedy is to write the settings into the specification and to ask for the raw record when a result falls near a limit. ## No factor can bridge two methods A conversion factor assumes the ratio between the two assays is constant for every preparation. It is not, because the protein, pH, temperature and counted amount all differ. Even the nominal arithmetic between a microgram and a micromole of tyrosine does not create a bridge: the two numbers were produced on different substrates under different conditions. Within one scale, the total units convert exactly. A kilogram at 50,000 U/g holds 50 million U, and two kilograms at half the activity per gram hold the same total. That is useful for ordering and for blend calculations. It says nothing about the U-to-AU relationship. When a buyer needs the other unit, the only sound route is to run both assays on the same lot. ## What the paperwork must state A food enzyme supplied to a manufacturer in the EU must show its declared activity and unit alongside the name, a food-use statement, the lot and storage conditions. A unit without the method is an incomplete specification, and a figure without the unit is an incomplete label. The UK retained regime follows the same logic. US labelling places enzyme activity in the specification column, not the nutrient column. It has no daily value and does not belong in the nutrition panel. If the enzyme still functions in the finished food, the ingredient list has to name it; the activity figure remains a specification and certificate item. Every market needs the same choice made explicit: is the figure the activity at release, or the activity promised at the end of shelf life? A label that leaves the choice open is making two promises at once. ## Pick the unit your specification can test For a new neutral protease specification, U/g on casein is the practical choice: the method is widely used, the substrate is defined and most suppliers can reproduce it. Keep AU when a legacy formula, a customer specification or an existing label is written in Anson units; translating the number would create a new material on paper. If a supplier offers only the other unit, ask for both assays on the same lot and read the pair as the evidence. Do not pick the unit that yields the larger number, and do not accept a catalogue conversion factor as a specification. Put the method reference, the conditions and the basis beside the unit. Grade choices are compared on the grades page; certificate lines are on the COA page; identity evidence is on the identity page; the catalog entry is on the product page; and the assay vocabulary is in the assay glossary entry. ### 03 Neutral protease activity falls with heat and moisture; the process decides the shelf life URL: https://nutrition.rainwoodbio.com/products/enzymes/neutral-protease/stability/ Reviewed: 2026-11-19 Neutral protease is stable as a dry, cool, sealed powder. It is unstable when water, heat, an extreme pH or a long liquid hold gives the protein a chance to unfold. The catalog numbers pH 6.5–7.5 (1% solution) and loss on drying ≤8.0% describe the powder at release; they do not describe a granule, a tablet or a pouch that has been open for a month. In one lineThe pack, the process and the storage condition decide the activity at the end of shelf life; the powder alone does not. ## The dry pack is the benchmark Sealed and cool, the powder loses activity slowly enough that the loss is measured in months. Moisture is the variable that changes that. Loss on drying ≤8.0% is a release limit, not a storage target, and two powders at the same LOD can behave differently if one holds more free water. Water activity is the more useful predictor, and it belongs in the stability file even when it is not on the COA. Packing is part of the same system. The 1 kg foil pouch and the 25 kg fiber drum with a food-grade liner are the standard packs; a desiccant helps where the design allows it, and the pouch needs closing between weighings. A humid weighing room, an open bag over a weekend or a drum stored against a warm wall can do more damage than a year on a cool shelf. Once the powder has picked up water, resealing does not restore the lost activity. ## A liquid hold is a different material In water the enzyme moves, encounters substrate and loses activity much faster than in the dry state. The pH 6.5–7.5 figure is measured on a 1% solution; it is not a statement that the enzyme is equally stable across that window, nor that a liquid blend will hold its activity as long as the powder. A liquid also supports microbial growth, so hold time, preservative and micro control become part of the same question. When a process includes a liquid stage, keep it short and cool, and measure activity after the hold instead of assuming the powder figure carries through. Freeze–thaw cycles add another loss mechanism, and a solution that is frozen, thawed and left standing is not the same test as one used immediately. The powder is the storage form; the solution is an intermediate. ## The mechanisms behind the loss Stability factors · mechanism and control | Factor | Mechanism | Control | Temperature | The rate climbs with heat; near 50–60 °C unfolding overtakes activity, and steam is worse than dry heat | Cap dryer and granulator temperatures; test after the step | Water | Free water allows unfolding and clumping, and supports microbial growth | Sealed pack, desiccant, low water activity in the blend | pH | Acid or alkali denatures the protein; 6.5–7.5 is the 1% solution specification | Check blend pH; avoid aggressive acidic or alkaline excipients | Metal chelators | Bacillus neutral proteases are often metalloenzymes, so a chelator can remove the cofactor | Confirm with the supplier before adding EDTA or a similar agent | Substrate | In a wet protein mix the enzyme can act on the substrate or on itself | Store dry blends only; do not hold a wet blend A failed tablet can involve several rows at once: heat from drying, water from a granulation and a chelator from the excipient list. That is why the fix is usually a process change rather than a larger overage. The overage hides the loss; it does not remove the cause. ## Test the pack and the finished form A stability programme should cover the powder in its pack and the matrix in which it will be sold. Real-time arms at 25 °C/60% RH and 30 °C/65% RH represent the ordinary supply chain; 40 °C/75% RH gives an early warning but cannot assign a shelf life by itself. Test at 0, 1, 3, 6, 9, 12, 18 and 24 months for activity, loss on drying, appearance and microbiology. Then add the process challenge. Run the powder through the real granulation, drying, tableting or blending step, sample before and after, and assay both. Store the finished blend or tablet at the intended condition. Bracketing by pack size or grade can reduce the number of arms, provided the wettest and hottest case is included. Keep a sample from every lot and every time point. ## Give the enzyme a dry, late place in the process Add the enzyme as late as the process permits. Dry blending, dry binders and direct compression avoid water; aqueous granulation, a wet coating or a hot dryer introduce it. When a wet step cannot be avoided, measure activity after drying, because the loss belongs to that step and cannot be assumed from another product. Control water activity in the finished blend, not only loss on drying. A hygroscopic carrier can pull moisture from the room and raise the water activity of the whole mix, so the pack and the storage condition have to be tested together. An overage should come from measured process loss and be declared in the specification; it should not be used to paper over a formulation that cannot hold the enzyme. Check pH-affecting excipients and chelators before the first trial. ## The declaration needs a data trail Shelf life is a property of the pack, the storage condition and the matrix. The declaration should distinguish activity at release from activity guaranteed at the end, because they are different promises. A sealed pack stored cool and dry often carries an 18–24 month declaration, but that figure has to be supported by real-time data for the grade and pack in question, not borrowed from a general rule. Ask for the stability summary, the time points, the assay method and the storage conditions behind the number. If the pack will be opened repeatedly or decanted into the customer's container, test that use too. The COA figure belongs to the release date; the figure that matters at the end of shelf life is the one the stability file can defend. The release lines are on the COA page, the packs and order details on the MOQ page, the grade options on the grades page, and the release workflow on the quality page. ### 04 Neutral protease: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/enzymes/neutral-protease/moq/ Reviewed: 2026-11-19 Neutral protease orders start at 1 kg, in a foil pouch taken from a released lot; production quantities move to 25 kg fiber drums. The catalog grade leaves in 1–7 days. A firm quotation needs six facts, and a custom dilution or granulation is quoted as its own item with its own minimum. In one lineOne kilogram is the smallest packed and released unit, and it gives a buyer enough material to assay, trial and retain before a drum. ## The first kilogram is a qualification pack At 50,000 U/g, a kilogram contains 50 million U. That is enough for an in-house activity assay, a trial blend, a short capsule or stick-pack run and a retained sample. Splitting it further would produce a sample that no longer stands for a full pack of the lot. Every pouch is filled from a lot that has already been released, and the lot certificate travels with it. The 25 kg drum is the same specification at production scale; only the pack, the handling and the freight weight change. Dilutions and granulations are custom work; their floor is the smallest batch the plant can blend evenly. The quotation states that floor; it is not automatically the catalog's 1 kg. ## Pouch and drum, same specification Catalog packing runs to two sizes: the 1 kg foil pouch and the 25 kg fiber drum. The pouch is the courier-sized unit and the drum is the forklift-sized unit. Both need a seal; the drum needs a food-grade liner and, where the design allows, a desiccant. The pack is part of the stability system, not just a way to move powder. The label needs the name, the activity and unit, the lot, the date, the storage instruction and a pointer to the SDS. One lot code should run across the pouch, the certificate and the retained sample; a mismatch breaks the link to the pack. Enzyme dust can sensitise the airways, so the powder is handled as a respiratory hazard. Weigh it under local exhaust ventilation or in a controlled booth, and close the empty pouch before disposal. Read the SDS for exposure controls and spill cleanup; a pack label does not cover either. ## What the 1–7 days includes Catalog lead time is 1–7 days from confirmation of the specification and the order. That window covers a lot that is already released as well as one that has to be drawn, packed and documented; it does not include transit, which depends on the route and the mode. Custom work — a dilution, a granulation or a special pack — needs extra days for processing, assay and release. Market-specific paperwork can add another step. Put the intended use and destination in the first message, so the quoted window covers the paperwork. If a production date is fixed, give the latest acceptable delivery date as well as the order date. ## Six facts a quotation needs What changes a neutral protease quotation | Detail | What the buyer must state | Grade and unit | 50,000 U/g, a dilution or a granulated form, and the U definition behind the figure | Quantity and pack | Pouch, drum or a multiple; each has a different handling and freight profile | Destination and Incoterm | The route decides export papers, duty and who clears customs | Intended use | Food enzyme or supplement ingredient; the document pack follows the use | Document set | COA, TDS, SDS, allergen, GMO, origin or a customer-specific list | Pack and certificate wording | Activity, unit and carrier text that must appear on both A product name and a weight produce a catalog offer, not a quotation. The intended use is the detail that changes the most, because a food-enzyme buyer and a supplement manufacturer need different documents from the same powder. ## A sample should carry the lot's paperwork Ask for a sample from the lot that is being offered, with that lot's COA. Use it to check solubility, colour, dust, flow and the activity assay in your own method before the first drum. It is not a separate production run and does not guarantee the next lot, but it is the most direct way to qualify a source. Request a sealed foil pouch rather than a screw-top jar; a jar can take up moisture in transit and distort the activity or loss-on-drying result. Note the lot code, keep part of the sample as a retained reference, and compare the sample certificate with the one that arrives with the drum. ## Six clauses to agree before the drum ships - A signed specification that names the unit and the assay conditions. - The COA acceptance criteria and the procedure for a disputed result. - How much shelf life remains on delivery, and how the buyer will store the powder. - Which certificates ship with the lot and which are available on request. - Pack wording, the carrier name and any claim the buyer plans to make. - What “same product” means on reorder: grade, unit, pack and specification revision. These clauses settle most of the arguments that start after delivery. One signed page that names the unit prevents most of the correspondence that follows an undefined activity figure. The product page carries the catalog entry; release lines are on the COA page, grade choices on the grades page, and storage risks on the stability page. ### 05 Where neutral protease is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/enzymes/neutral-protease/compliance/ Reviewed: 2026-11-19 Neutral protease from Bacillus subtilis is regulated as a food enzyme preparation. A compliance review has to answer four questions that are often confused: may the preparation be used in this market, does the lot meet the purity limits, how is it described, and what may the brand claim? Each answer depends on the market and on the production strain. In one lineUse, purity, labelling and claims are separate questions, and a compliance file has to answer all four for the destination market. ## Four questions, four answers The first question is permitted use: is this enzyme allowed in the intended food process? The second is purity: does the lot stay inside the contaminant and microbiological limits? The third is description: how is the preparation named on the label, including its carrier? The fourth is the claim: what may the brand say about the finished product? “Neutral protease” is an activity, bacillolysin (EC 3.4.24.28), not a single authorised substance. Permission attaches to a preparation — organism, strain, fermentation medium and carrier included. Two powders can both read 50,000 U/g and still sit under different regulatory positions, which is why the file describes the preparation rather than only the activity. ## European Union: national rules while the list is pending Regulation (EC) No 1332/2008 is the framework. The regulation makes Union-list entry a condition of marketing or food use, and that list is still outstanding at the time of writing. The transitional position leaves national provisions on placing on the market and use in force in the Member States. Name the Member State of sale in the file, not only “the EU”, and check the current text before launch. Applications sit on a Commission register; the file should identify the entry for this enzyme and this use. EFSA assesses the production strain and the process, not the activity name in the abstract. A 2024 opinion on a preparation with bacillolysin and subtilisin activities from a non-genetically modified Bacillus amyloliquefaciens strain, covering nine food processes, shows how closely the assessment is tied to the strain; a different preparation needs its own entry and evidence. “EU approved” is not an accurate description while the list is pending. The defensible wording names the national provision, the register entry and the application status. ## United States: the 21 CFR 184.1150 route The US regulation that fits this preparation is 21 CFR 184.1150. It describes a bacterially-derived protease enzyme preparation made by pure-culture fermentation of a nonpathogenic and nontoxigenic strain of Bacillus subtilis or B. amyloliquefaciens, containing subtilisin (EC 3.4.21.62) and neutral proteinase (EC 3.4.24.28), and affirms it as GRAS for hydrolysing proteins and polypeptides under current good manufacturing practice. The section also points to the Food Chemicals Codex monograph on enzyme preparations and requires the absence of antibiotic activity by a validated method. That is a food-use basis, not a supplement approval. A supplement brand still needs a dietary-ingredient basis under DSHEA and cGMP under 21 CFR 111, and the label and claims are separate questions. The brand should check that its intended use fits the basis instead of assuming that a food-enzyme citation covers every supplement format. ## United Kingdom: check GB and NI separately In Great Britain the assimilated version of Regulation (EC) No 1332/2008 applies. The Food Standards Agency and Food Standards Scotland hold the register of regulated-product authorisations, and the position should be checked for the specific enzyme, strain and use. Northern Ireland follows the EU regime, so a GB check does not answer the NI question. As in the EU, the current text governs, not a supplier's summary. ## Limits and where they come from Contaminant and microbiological limits · catalog and EU food-supplement ceilings | Parameter | Catalog limit | Market note | Lead | ≤3 mg/kg | EU supplements: 3.0 mg/kg on the product as sold | Arsenic | ≤2 mg/kg | No general EU limit for this matrix; the catalog sets 2 mg/kg | Cadmium | ≤1 mg/kg | EU supplements: 1.0 mg/kg as sold | Mercury | ≤0.1 mg/kg | EU supplements: 0.10 mg/kg as sold | Microbiology | APC ≤10,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | General food-safety obligation; customer specifications can be stricter | Loss on drying | ≤8.0% | Quality parameter; it also sets the activity basis Regulation (EU) 2023/915 sets the EU ceilings on the supplement as sold, not on the enzyme powder. The ingredient limit must be chosen so the finished product stays below the ceiling; that calculation belongs to the brand, and the COA is one input to it. US state rules and UK requirements can be tighter than the catalog, so the destination limit has to be checked rather than assumed. ## The claim is the brand's document This material carries no disease-related claim, and these pages cover the specification and the file rather than any effect in the body. “Neutral protease activity ≥50,000 U/g” is a specification statement, not a health claim. Anything said about the finished product belongs to the brand and must satisfy the rules of the market where it is sold: the EU health-claims regulation, the US supplement framework and the retained UK regime each apply their own test. The enzyme file can support identity, activity and purity. It cannot support a statement about what the finished product does, and the label artwork should keep that line visible. ## What ships with the lot - Specification naming the unit and the assay conditions. - Lot COA with result and limit in separate columns. - TDS covering activity, solubility, pH and the pack format. - Safety data sheet, including dust-control and exposure sections. - Allergen declaration: source organism and carrier. - Statement on GMO status for the organism and its inputs. - Origin record and strain declaration. - Composition statement, including the carrier. - Stability data summary, grade- and pack-specific. - Residual-solvent statement for the recovery process. ## Checks before release to a market Market release checks for a neutral protease lot | Check | Evidence | Market and process named | Memo covering the intended use, not only the substance | Organism and strain recorded | Origin file and strain declaration | Regulatory status confirmed | EU register entry, a 21 CFR 184.1150 or GRAS basis, or the UK register position | Contaminants inside the destination limit | Lot COA, plus a third-party report where needed | Carrier and allergen checked | Composition statement and label artwork | Pack wording checked | Activity, unit, carrier and storage on the label | Claims reviewed | Substantiation file held by the brand | Document pack complete | The ten items above, matched to the lot The catalog entry is on the neutral protease product page; release lines are on the COA page, source and activity evidence on the identity page, and the frameworks are summarised in the EU, US and UK notes. The quality page describes the release workflow. ### 06 How we prove a neutral protease lot has the declared activity URL: https://nutrition.rainwoodbio.com/products/enzymes/neutral-protease/identity/ Reviewed: 2026-11-19 Four independent checks stand behind a neutral protease lot: the organism and strain, the protein profile, the casein activity and the chain from sample to drum. None is sufficient alone. The activity figure is the one buyers look at first, and it is also the easiest for a different preparation to satisfy. In one lineA neutral protease lot is only as strong as the agreement between its Bacillus strain, its protein profile, its casein assay and its lot record; the U/g number alone proves very little. ## Four independent checks The organism check asks whether the declared Bacillus subtilis strain is the one that was fermented, and whether the origin and fermentation records support it. The protein check asks whether the powder contains the expected protein profile. The activity check asks whether it cuts casein at the declared rate under the declared conditions. The record check asks whether the certificate, the pack and the retained sample all point to the same lot. Identity checks · question and evidence | Check | Question | Evidence | Organism | Is the declared Bacillus strain the one that was fermented? | Strain declaration, origin record, fermentation description | Protein | Does the protein profile fit the preparation? | Total protein and gel bands | Activity | Does it cut casein at the stated rate? | U/g with substrate, pH, temperature and standard | Record | Does the paperwork point to this drum? | Lot code, COA and retained sample Read together, the four describe a preparation. Read alone, each is incomplete: a strain name says nothing about activity, an activity figure says nothing about source, and a certificate without a lot code cannot be tied to the drum in front of you. ## The assay, the unit and the protein ratio The unit is whatever the method defines. In the common casein method, the substrate is held at pH 7.0 and 40 °C and one U releases 1 µg of tyrosine equivalent per minute, measured by Folin–Ciocalteu colour against a tyrosine standard. Other method sheets use pH 7.5 and 30 °C or 37 °C, so the certificate has to print the definition it followed. At 50,000 U/g the powder carries 50 U per milligram of preparation, not per milligram of protein. Protein is measured by Bradford, BCA, Kjeldahl or another named method, and each carries a bias. The revealing number is the ratio: U per milligram of protein. Within one grade and one method it should be stable. A protein carrier lowers both activity and protein, so the ratio holds; heat damage lowers activity while protein is still measured, so the ratio falls. A ratio that drifts at constant U/g means the powder contains more protein for the same activity — a different recovery cut, an inactivated fraction or an undeclared carrier. The ratio is a trend, not a purity specification. Neutral protease preparations are mixtures of proteins, so specific activity is only meaningful together with the assay and protein method that produced it. Track it inside one supplier's method; there is no universal cutoff to compare against. ## XRD is the wrong tool for the protein X-ray diffraction is sometimes requested as an identity test. A dried enzyme powder is amorphous, so it produces a broad halo instead of the sharp reflections of a crystal. That halo can look the same from lot to lot without saying which enzyme is present. XRD can detect a crystalline carrier or a crystalline contaminant, which is a useful composition check, but it cannot identify the protein. A matching diffractogram is not proof that a lot is neutral protease. The identity case rests on the organism, the protein profile and the activity assay, read together. If a customer specification requires XRD, use it as a carrier check and put the identity claim on methods that can support it. ## Routes that can satisfy a weak test Adulteration routes · what passes and what detects them | Route | What passes | What detects it | Carrier dilution | The blend still assays at the declared U/g | Carrier disclosure, mass balance, specific activity | Another protease | Casein is cut | Protein bands, strain record, a source-specific test | Heat-killed powder | Protein and colour remain | U/g falls and specific activity falls | Paper activity | A number on the certificate | Independent assay by the named method | Different source | The word “protease” covers it | Strain statement, origin record, supplier audit These rows are checks, not charges. Most shipments match their paperwork. Testing U/g covers one check out of four; the remaining three are available on request. A gel pattern is a quick view of whether the protein looks like the qualified material; the strain record is a quick view of whether the organism matches the declaration. ## A specification that can be checked - “Neutral protease (bacillolysin; EC 3.4.24.28) preparation from Bacillus subtilis, CAS 9025-39-2.” - “≥50,000 U/g by the casein method; the COA prints substrate, pH, temperature, time and standard.” - “As-is result; loss on drying ≤8.0% for the lot.” - “Protein and specific activity reported, with the protein method.” - “pH 6.5–7.5 (1% solution); ≥95% through 40 mesh.” - “Heavy metals Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg; APC ≤10,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent.” - “Carrier and side activities declared; no undeclared diluent.” The final line carries weight. A dilution is acceptable only when its carrier is written into the specification and the certificate, not left to an email. A second enzyme activity follows the same rule: if the powder contains one, the description says so. ## Five questions before qualification - Which Bacillus strain was fermented, and is it B. subtilis? - How is the U defined — substrate, pH, temperature, time and standard? - Was the assay run as-is or on dried solids, and what did the lot's moisture test show? - Which protein method was used, and what specific activity did it give? - Does the powder contain a carrier or a second enzyme activity, and which document declares it? If the method answer is “standard”, ask for the sheet. A carrier answer of “none” should come with a mass balance. The COA page shows where each answer lands on the certificate; the grades page covers dilution; the U versus AU page covers the unit; the product page carries the catalog limits; and the quality page describes the release workflow. ### 01 What the COA for papain actually contains URL: https://nutrition.rainwoodbio.com/products/enzymes/papain/coa/ Reviewed: 2026-11-19 The certificate for a papain lot reports appearance, activity in USP units per milligram, the pH of a 1% solution, loss on drying, mesh, heavy metals and microbiology. Activity is a casein-hydrolysis result, and the figure means little unless the certificate sets the USP method, the casein substrate and the assay conditions beside it. The values below are the catalog specification; the batch COA confirms one lot of papain powder. In one lineA papain certificate has to show the USP unit, the casein substrate and the 60-minute incubation behind the activity result, not only a figure above 6,000 USP units/mg. ## The certificate as a test report A food-enzyme certificate is a test report, not a label transcript. Every row needs a parameter, a method and a release limit, and the lot code has to match the pack, the retained sample and the invoice. Activity and moisture carry most of the risk: the first is why the material is bought, the second moves the activity per gram at unchanged protein. Release specification · papain powder from Carica papaya latex | Parameter | Method | Release limit | Appearance | Visual | Off-white to light tan, free-flowing powder | Papain activity | USP casein assay | ≥6,000 USP units/mg | pH (1% solution) | Potentiometry | 5.0–7.5 | Loss on drying | Gravimetric | ≤8.0% | Particle size | Sieve analysis | ≥95% through 40 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤10,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent ## What the USP units/mg figure measures One USP unit of papain activity is defined through the USP casein assay: it releases the equivalent of 1 µg of tyrosine from a specified casein substrate under the conditions of that assay, at the enzyme concentration that liberates 40 µg of tyrosine per millilitre of test solution. In practice the method is a 60-minute incubation of Hammersten-type casein at pH 6.0 and 40 °C, stopped with trichloroacetic acid, read at 280 nm and converted through a standard curve built from USP Papain Reference Standard. The unit is a rate against a reference standard, not a mass of papain protein. The figure is per milligram of powder as sold, so moisture is part of the number: a lot at the 8.0% loss-on-drying limit carries more water than a drier lot, and its as-is activity will be lower at the same dry-solids activity. The certificate should state the basis, as-is or dry solids, beside the loss-on-drying result. The pH row is different again: 5.0–7.5 describes a 1% solution, not the pH 6.0 of the assay. Particle size is a sieving result, not an activity result. The 40 mesh line describes a powder that blends and dissolves; a change of mesh needs a new sieve result, not a new assay. The loss-on-drying note covers the moisture term. ## Release limit versus batch result A limit is the gate; a result is what the laboratory measured. They belong in separate columns, with the method and lot code attached. A certificate that prints “≥6,000 USP units/mg” in the result column has repeated the specification, not reported a result; ask for the measured value, the reference standard, the release date and the testing site. The activity limit is one-sided. A lot just above 6,000 and a lot well above it both pass, and the second carries more units per kilogram into a blend. That is headroom for a process step that consumes activity, but two certificates can agree on “conforms” and describe different materials. Fix the reporting resolution and acceptance rule in the specification. Activity also falls after release. The COA is a snapshot at the release date, so it should name the storage conditions assumed and the activity guaranteed at the end of the declared shelf life. If the guarantee is end-of-shelf, the release result must sit above the label figure by whatever the stability study justifies; the stability page covers that calculation. ## What moves between batches Papain comes from the latex of unripe Carica papaya fruit, so the raw material is agricultural before it is enzymatic. Fruit maturity, tapping practice, the interval between collection and processing and the condition of the latex all reach the powder. The latex is also a mixture of cysteine endopeptidases, with papain accompanied by chymopapain, caricain and glycyl endopeptidase; the casein assay sums their action, so their proportions can shift without the USP figure moving in a simple way. Filtration and precipitation decide how much protein and non-enzyme solids reach the powder. Drying and milling decide how much activity survives: a hotter dry or a milling step that generates heat can lower the assay before the sieve is reached. Standardisation is the last lever. The USP monograph allows a higher-activity papain to be reduced to the official standard with lower-activity papain, lactose or another suitable diluent, so a 6,000 USP units/mg lot may be a diluted concentrate. That is why the carrier line belongs on the certificate: if lactose or another diluent is present, the buyer needs to know before the allergen review, the moisture calculation and the blend formulation. Colour is a weak signal; the assay and the batch record decide whether the lot is acceptable. ## When an outside laboratory earns its fee Independent testing is worth ordering for a new latex source, a first shipment into a regulated market, a label claim that rests on the activity figure, or a result that disagrees with the process trial. The panel is narrow: USP casein assay on a retained sample, protein content, a protein pattern by gel electrophoresis, loss on drying, heavy metals by ICP-MS and microbiology. The referee must run the same substrate, standard, pH, temperature and incubation time as the specification, or the comparison measures methods rather than powder. Ask for raw absorbance readings, the standard curve and replicate results, not only the final potency; a “not detected” line without a detection limit describes the method. The sample tested should be the sample retained, with the lot code on bag, certificate and submission form. ## What to compare between suppliers Supplier comparison · lines that must agree before two papain quotations can be compared | Line | What to ask for | Source | Carica papaya latex, plant part and country of origin | Activity | Measured USP units/mg, not only the ≥6,000 limit | Method | USP casein assay, reference standard, pH, temperature and incubation time | Basis | As-is or dry solids, with the loss-on-drying result | Protein | Protein content or specific activity, if the supplier reports it | Carrier | Diluent identity and amount, including lactose or another standardiser | Physical | pH of a 1% solution and the mesh result | Contaminants | Heavy-metal and microbiological results against the limits Two quotations that agree on 6,000 USP units/mg but differ on the standard, carrier or moisture basis are not the same powder. Catalog figures sit on the papain product page; the grade choice is on the grades page; identity tests are on the identity page; the release workflow is on the quality page; and the vocabulary is in the COA glossary entry and the ICP-MS note. ### 02 6,000 USP/mg or a dilution: choosing a papain grade URL: https://nutrition.rainwoodbio.com/products/enzymes/papain/grades/ Reviewed: 2026-11-19 Choosing a papain grade means choosing how many USP units one gram of powder carries, which carrier and particle form deliver them, and what the label is allowed to say. The catalog grade is ≥6,000 USP units/mg at 40 mesh; a lower-activity dilution and a granulated form are the alternatives. The enzyme is the same material in each case; the mass you weigh, the carrier load and the process behaviour change. In one lineA papain grade is an activity per gram on a declared carrier, so 6,000 USP units/mg and a lower-activity dilution differ in the mass you weigh, not in the identity of the enzyme. ## Why a grade decision exists Papain is standardised to an activity, not sold as a fixed concentration of protein. The USP monograph sets 6,000 USP units/mg as the minimum for the official article, and it expressly allows a stronger preparation to be brought down to that figure with lower-activity papain, lactose or another suitable diluent. A supplier can therefore land anywhere at or above the floor and standardise downward to the figure a customer wants. Two powders can both be called papain and differ by a factor of two in the mass needed for the same number of units. The grade decision is a concentration decision with three consequences: how much powder the formula weighs, how much carrier enters the blend, and what the certificate and label can state. It is not a decision about whether one powder is more “active” in the abstract; a gram of a half-strength grade is simply carrying fewer units. ## The three practical options Papain grades and what each one changes | Option | Activity | What else arrives | Where it fits | What changes on switching | Standard powder, 40 mesh | ≥6,000 USP units/mg | No deliberate dilution beyond standardisation | Enzyme blends and powder sticks dosed by units | Baseline: lowest mass per batch | Lower-activity dilution | Below 6,000, by agreement | A larger share of food-grade carrier | Small-dose sticks where weighing accuracy matters | More mass, more carrier, more moisture risk | Granulated powder | ≥6,000 USP units/mg | Granulation aid and a coarser particle | Dry blends where dust and flow are the problem | Better flow, slower dispersion, new sieve result The arithmetic is exact. One kilogram at 6,000 USP units/mg carries 6 billion USP units. A half-strength grade carries 3 billion per kilogram, so the same batch needs two kilograms for the same unit count. That calculation belongs in the batch record; it does not tell you whether the extra carrier will fit the formula. ## Physical form, dust and dissolution The catalog powder passes ≥95% through 40 mesh, is free-flowing and dissolves in water to a clear to slightly hazy solution. Fines are what make it disperse quickly and what make it dust. Papain is a known respiratory sensitiser, so a dusty powder is a handling and documentation issue as much as a processing one: the SDS carries the hazard statements, and local exhaust ventilation, closed transfer and the right respiratory protection belong in the operating procedure. A granulated grade trades some dispersion speed for flow and lower dust. It can be the better choice in a dry blend that would otherwise segregate or in a room where dust control is difficult. Check two things before switching: the granule must still disassemble in the intended liquid, and the sieve result and bulk behaviour of the granulated lot must be measured rather than assumed from the powder grade. ## The mass that carries the units Start from the units the batch needs, not from a habitual percentage. If a batch is designed to carry 60 million USP units and the powder reads 6,000 USP units/mg, the inclusion is 10,000 mg, or 10 g. At a half-strength grade the same batch needs 20 g. That is the whole inclusion question at the ingredient level: activity per milligram sets the mass, and the mass sets how much carrier and moisture enter the blend. Label consequences follow. A label that declares 6,000 USP units/mg describes the powder, not the finished serve; a label that declares a number of USP units per serve must be recalculated whenever the grade changes. State whether the activity is guaranteed at release or at the end of shelf life, and do not carry an activity statement from the standard grade onto a dilution. The COA page shows where the activity and moisture lines sit; the stability page explains why the end-of-shelf figure is the one that matters. ## Writing the grade into the specification A purchase specification for a papain grade should carry the activity as “not less than” with the unit and the USP method named, the source as Carica papaya latex, the carrier identity and amount, the mesh result, loss on drying, pH of a 1% solution, the heavy-metal and microbiological limits, the pack, the storage statement and the shelf life. If the grade is a dilution, the specification should say what it is a dilution of and what carrier was used, because the carrier is now part of the material. Two habits prevent most grade errors. First, write the total units per pack as well as the activity per gram, so a change in pack size or activity is visible at goods-in. Second, handle a grade change as a change to the specification, the label and the allergen review, not as a purchasing substitution. A new carrier can add an allergen statement; a lower activity can push the blend above its moisture limit; a granulated form can change dissolution time. ## When not to change grade Do not dilute to solve a weighing problem if the extra carrier would push the blend past its moisture limit, its carrier allowance or its allergen declaration. Do not switch to a granulated form late in development without a dispersion check, because a granule that flows well can sit at the bottom of a stick pack. Do not accept a lower activity merely because the certificate still says “papain”; the unit count per kilogram has changed, and every downstream calculation with it. The standard 6,000 USP units/mg powder is the right default for most blends because it carries the fewest grams of non-enzyme solids per million units. The alternatives are useful when a specific process problem justifies them, not as a default. The papain product page lists the catalog figures; the difference between USP and TU is set out on the unit comparison page; pack sizes and the 1 kg minimum are on the ordering page; and the assay vocabulary is in the assay glossary entry. ### 03 Papain activity falls with heat and moisture; the process decides the shelf life URL: https://nutrition.rainwoodbio.com/products/enzymes/papain/stability/ Reviewed: 2026-11-19 A sealed pouch of papain powder holds its activity for months; an open pouch, a wet granulation or a hot tablet run can remove a meaningful share of it in hours. The loss is driven by heat, water, oxidation of the active-site cysteine and pH, and the pack and the process decide the shelf life more than the release certificate does. The catalog limits describe the powder at release; they do not promise what remains after a process step or a year on a shelf. In one linePapain is a thiol protease: heat and moisture unfold it, oxidants and metal ions attack the active site, and the process step that exposes it to both sets the shelf life. ## The dry powder, the pack and the water activity The catalog loss on drying is ≤8.0%, and that is a release window, not a storage specification. Water in the powder enables molecular mobility and slow hydrolysis, and it leaves less headroom for moisture picked up in a humid room. A lot released near 8.0% has less margin than a drier lot, even when both pass the same activity limit. The loss-on-drying note explains why the figure is a release gate rather than a prediction of shelf life. Keep the powder in the sealed foil pouch or the fiber drum until the batch is ready. A pouch left open in a humid dispensary picks up water at the surface first, which is also where the fines are; the powder can look free-flowing while the top layer has already lost activity. Store cool, dry and out of direct light, and avoid temperature cycling that drives moisture to the inside of the pack. A desiccant helps only while the pack stays sealed; it is not a substitute for closing it. ## The solution is a short-lived intermediate Papain in water is vulnerable in a way the dry powder is not. The enzyme is a cysteine protease, and once it is in solution it can hydrolyse itself as well as the intended substrate, a process that accelerates as the solution warms. A stock solution made for a trial should be used within the working period and kept cold; it should not be held overnight and assumed to be unchanged. The powder's stability data say little about the solution, because the mechanism and the water activity are different. Where a solution is unavoidable, hold it at the pH and temperature of use, keep oxidants and metal ions out, and assay it at the start and end of the hold. A reducing agent such as cysteine and a chelator such as EDTA protect the active-site thiol in the assay buffer; the same chemistry explains why process water, cleaning residues and copper or iron contact can shorten the useful life of a process stream. ## What destroys activity, and what to control Loss routes for papain activity and the control that addresses each | Factor | What happens | Control | Heat | Above roughly 60 °C the protein unfolds and the loss becomes irreversible | Keep process temperature and hold time down; assay after the step | Moisture | Water enables hydrolysis and autolysis and raises molecular mobility | Sealed pack, low water activity, dry handling | pH | Outside roughly pH 5–7.5 the enzyme loses activity and stability | Buffer the solution; check the finished blend's pH | Oxidation | Oxidants and oxygen convert the active-site cysteine to an inactive form | Avoid oxidising sanitizers; limit air and metal contact | Metal ions | Copper and iron can bind the thiol or catalyse oxidation | Use compatible contact materials; chelate where appropriate A wet granulation adds water and heat together; a tablet run adds pressure and heat; a stick pack adds a large surface-to-volume ratio and a film that may or may not be a moisture barrier. The combined exposure is what the stability study has to reproduce. ## A stability protocol that answers the question Design the study around the pack and the process the customer will actually use. A long-term condition of 25 °C and 60% relative humidity, an intermediate condition and an accelerated condition of 40 °C and 75% relative humidity are the usual frame; time points at 0, 3, 6, 9, 12, 18 and 24 months cover a typical claim. Test activity by the USP casein method, loss on drying, pH, appearance and microbiology at each point, and use more than one lot so the result is a pattern rather than a single curve. For an enzyme, accelerated data is a screening tool, not a substitute for real-time data. A high-temperature result can rank two formulations, but it does not prove a two-year ambient claim. Add a process simulation: granulate, dry, compress or fill the powder under the intended conditions, then assay the finished intermediate. The relevant sample is the one after processing, not only the raw powder that entered it. Retain a sealed portion of each lot for the life of the claim, with the lot code on the pack and the record. ## Granulation, tableting and the finished blend Wet granulation is the harshest common step because it combines water, heat and a large interfacial area. Dry granulation and roller compaction avoid water but still generate heat and shear. Tableting adds pressure and frictional heat, and a coating step adds another thermal cycle. In a powder stick or a drink mix, the enzyme sits with acids, minerals, flavours and sometimes reducing agents; the microenvironment can be different from the pure powder, so the blend needs its own stability data. An overage can cover a measured process loss, but it has to be declared and justified by data. Adding extra enzyme to compensate for an unmeasured loss is not a stability strategy; it hides the loss and may push the label claim above what the study supports. The carrier in a lower-activity dilution also brings its own moisture and particle behaviour, which is why the grade page makes carrier load a formulation decision. ## What the shelf-life claim has to state A shelf life is a property of the powder, the pack and the storage condition together. The claim should name the months, the temperature, the relative humidity and the pack, and it should say whether the declared activity is guaranteed at release or at the end of the shelf life. A powder released at 6,000 USP units/mg does not still carry 6,000 at expiry unless the study and the release target were built for that promise. If the label declares end-of-shelf activity, the release specification needs the appropriate headroom. Repacking changes the pack, and a study on a 25 kg drum does not automatically cover a 1 kg pouch or a stick. A retest period is not the same as a shelf life, and an extended retest date is not a substitute for a stability study. Ask the supplier for real-time data on the same pack and the same storage condition, and check that the lot code on the data matches the lot code on the delivery. The COA page shows the activity and moisture rows the study follows; the ordering page covers the packs; and the catalog figures are on the papain product page. ### 04 Papain: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/enzymes/papain/moq/ Reviewed: 2026-11-19 Papain is ordered from a 1 kg sealed foil pouch, with a 25 kg fiber drum for larger requirements. Standard packs ship in 1–7 days; a custom dilution or granulation is a separate lead time. A firm quotation needs six facts: the grade and activity, the quantity and pack, the destination and delivery terms, the market documents, any custom test, and the sample or trial it supports. In one lineOne kilogram is the ordering unit because it is the smallest pack sealed, labelled and traced as a lot, and larger orders scale from that unit into a drum. ## Why 1 kg is the minimum The minimum is a packaging decision before it is a commercial one. A 1 kg foil pouch can be filled, sealed, labelled with a lot code and accompanied by a certificate; a few hundred grams repacked from a drum into an unlabelled bag cannot be traced back to the lot in the same way. The pouch also protects the powder from moisture and light, which matters for an enzyme that loses activity when it picks up water. One kilogram is enough for bench work and a pilot blend in many projects, and it leaves a retained portion for the shelf-life record. If the trial needs more, order several pouches from the same lot rather than a mixed set. The minimum is not a statement about the size of the customer; it is the smallest unit that can carry the identity and the documents the material needs. ## Packs and what each one protects Standard papain packs | Pack | Net weight | Format | Typical use | Foil pouch | 1 kg | Sealed foil pouch | Trial, laboratory, small batch | Fiber drum | 25 kg | Fiber drum | Production blend, larger batch Both packs carry the product name, the activity, the lot code, the net weight and the storage statement; the SDS carries the sensitiser information. Close the drum after dispensing, reseal the pouch and use it before the powder picks up moisture. Papain is a known respiratory sensitiser, so open and dispense the pack under the dust controls named in the SDS, not in an open room. ## Lead time and what starts the clock The standard pack is quoted at 1–7 days from order confirmation, once the specification and the documents are agreed. The clock does not start while the activity basis, the carrier or the destination documents are still open, because those choices change what is packed and what travels with it. A custom dilution or granulation starts from a new specification, a sample approval and a production slot, so its lead time is quoted for the project rather than taken from the standard figure. The lot documents should travel with the goods: the batch COA with the measured activity and the method, the specification sheet, the SDS, the source statement and the allergen statement. A certificate that arrives for a different lot is not a certificate for the delivery. If the goods are consolidated with other materials, keep the papain pack and its documents separable so the lot code can still be checked at goods-in. ## The six facts a quotation needs What to put in a papain quotation request | Fact | What to state | Product and grade | Papain, ≥6,000 USP units/mg, or an agreed lower-activity dilution | Activity and method | USP casein assay, limit or target, as-is or dry basis | Quantity and pack | Total kilograms and the mix of 1 kg pouches and 25 kg drums | Destination and terms | Country, delivery address and the Incoterm to quote | Market and documents | EU, US or UK file; COA, SDS, source, allergen and GMO statements | Customization and tests | Granulation, carrier, mesh, extra assay or a sample for a trial A quotation that omits one of these lines is a quotation for an assumption, and the missing fact becomes a change order later. The same six facts also make two suppliers comparable: if one quotes a 25 kg drum of standard powder and the other a 1 kg pouch of a granulated dilution, the numbers are not describing the same delivery. ## Samples and the trial Ask for a sample drawn from the lot that will be shipped, with the lot code on the bag and the COA. The sample should be large enough for the bench work and the process trial, because the process is where activity is lost; a granulation or a tablet run on a few grams will not show what a pilot run shows. Keep a sealed retained portion for the life of the claim, and record the lot code on the trial report. A sample from a different lot is a different material, even when the certificate looks the same. If the trial is for a granulated grade, ask for the granulated sample rather than the base powder, and check dispersion and flow as well as activity. The COA page lists the tests the sample certificate should carry, and the stability page explains why the process trial needs an assay after the step. ## Terms worth agreeing before the first order Put the specification into the purchase order, including the activity method, the unit, the carrier, the mesh, the moisture limit and the acceptance rule. Agree what happens if a result sits at a limit, how a non-conformance is handled, and which documents must arrive with each lot. State the shelf life required at delivery and the storage condition the claim assumes; a long shelf life on paper is not useful if the pack spends a month in a warm warehouse. Change control is the other term to settle early. A change of latex source, carrier, drying step or standardisation should trigger a notice and, where relevant, a new sample and a new stability review. Payment and delivery terms belong in the quotation and the contract, not in the technical file. The papain product page has the catalog figures, the grades page covers the dilution and granulated options, the MOQ note defines the term, and the logistics page describes the shipping paperwork. ### 05 Where papain is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/enzymes/papain/compliance/ Reviewed: 2026-11-19 Papain is a food enzyme, not a nutrient, and the three markets prove its use in three different ways. The EU works through the food enzyme Union list built on EFSA assessments, the United States through the GRAS listing at 21 CFR 184.1585 and the Food Chemicals Codex specifications, and Great Britain through assimilated EU law and its own authorisation route. The file has to establish the preparation from papaya latex, the carrier, the intended technological use, the activity and the contaminants, and it has to name the instrument for each market. In one lineA papain file has to prove the latex-derived preparation, the activity method, the carrier and the market instrument that permits the use, all against the same lot. ## The framework: a food enzyme preparation Regulation (EC) No 1332/2008 defines a food enzyme as a product obtained from plants, animals or microorganisms that contains one or more enzymes capable of catalysing a specific reaction and is added to food for a technological purpose. A food enzyme preparation is that enzyme formulated with food ingredients or additives to help storage, sale, standardisation, dilution or dissolution. A papain powder standardised with a carrier is exactly that: a preparation, not a chemical. Papain (EC 3.4.22.2) is a cysteine endopeptidase from the latex of unripe Carica papaya L. The latex contains papain together with chymopapain, caricain and glycyl endopeptidase, and a latex-derived preparation carries the mixture. The source is a plant and a specific plant part, not a fermentation organism, which changes the source statement and the GMO question but does not remove either from the file. The assessment is of the preparation as made, not of the word “papain” in a list. ## European Union Food enzymes are authorised under Regulation (EC) No 1332/2008, with the procedure in Regulation (EC) No 1331/2008. The Commission builds a Union list by implementing regulation; each entry names the enzyme, the source, the foods in which it may be used and the conditions of use. The list is being completed in stages. As of this review, EFSA has published opinions on papain from papaya latex, but an opinion is not an entry. Ask for the Union list reference that covers this source and this food category, and check the current text before the first shipment. Until an entry applies, national provisions can govern. That is why “papain is permitted in the EU” is too coarse: the question is which entry covers this preparation, source, food and level. A food enzyme sold to a manufacturer carries the enzyme name, the food-use statement, the declared activity in the stated unit, the lot and the storage conditions; the carrier is part of the description. ## United States Papain is listed as a direct food substance affirmed as GRAS at 21 CFR 184.1585. The regulation describes a proteolytic enzyme derived from Carica papaya L., from latex collected from unripe fruit and purified by filtration or precipitation. It requires the ingredient to meet the Food Chemicals Codex specifications and permits use as an enzyme, processing aid and texturizer, with no limitation other than current good manufacturing practice. The regulation is a permission, not a test method. The FCC monograph and the supplier's COA carry the activity, moisture, heavy-metal and microbiological tests. If the enzyme has a function in the finished food, it is an ingredient and appears in the ingredient list by its common name under 21 CFR 101.4; if it qualifies as a processing aid because it is present at an insignificant level with no technical effect, the labelling rules exempt it. The supplier's basis for that distinction belongs in the buyer's hazard analysis under 21 CFR 117. California Proposition 65 is separate; the lead result and exposure calculation belong in the file. ## United Kingdom In Great Britain, assimilated Regulation (EC) No 1332/2008 continues to apply, and authorisations are handled through the Food Standards Agency's regulated products route rather than through EFSA. Northern Ireland follows the EU list under the Windsor Framework, so a pack sold in Great Britain and a pack sold in Northern Ireland can sit under different authorisations. Check the current GB position, and the current EU position for Northern Ireland, before a first shipment. ## Contaminants and the arithmetic of exposure Catalog contaminant limits · papain powder | Parameter | Limit | Method | Lead (Pb) | ≤3 mg/kg | ICP-MS | Arsenic (As) | ≤2 mg/kg | ICP-MS | Cadmium (Cd) | ≤1 mg/kg | ICP-MS | Mercury (Hg) | ≤0.1 mg/kg | ICP-MS | Total aerobic count | ≤10,000 cfu/g | Plate count | Yeast and mould | ≤100 cfu/g | Plate count | E. coli | Absent | Absence test | Salmonella | Absent | Absence test Those are limits on the raw material. The legal limits apply to the finished supplement, and the bridge is the dose. Regulation (EU) 2023/915 sets maximum levels for lead, cadmium and mercury in food supplements at 3.0, 1.0 and 0.10 mg/kg respectively, subject to category exceptions, with arsenic set by food category. At a 20 mg inclusion of powder at the lead limit, the contribution is 0.06 µg per unit; that is arithmetic, not a compliance conclusion, because the finished product's own result and recipe decide. The EU regulatory note tracks the instrument. ## Where the label has to stop An enzyme activity is a technological specification, not a nutrition content. There is no reference intake and no daily value to express it against, so it does not belong in a nutrition panel as though it were a vitamin. A label or a technical page can say that the product contains papain at a stated activity and that the enzyme is used for a technological purpose in manufacture. It cannot turn that activity into an outcome for the person taking the product. No health claim, structure-function claim or disease-related claim is made for papain on this page. The editorial policy sets the line these documents follow. Papain is also a known respiratory sensitiser: the SDS, the dust controls and the handling instructions are part of the compliance file, not a marketing statement. ## The document set, and who issues each part Documents a papain food-enzyme file is expected to hold | Document | Issued by | What it has to show | Batch COA | Manufacturer | Activity result, method, contaminants, lot code | Specification sheet | Manufacturer | Release limits, unit definition and carrier | SDS | Manufacturer | Hazard statements, sensitiser information, dust controls | Botanical source statement | Manufacturer | Carica papaya, latex, plant part and origin | Carrier statement | Manufacturer | Diluent or granulation aid and its amount | Allergen statement | Manufacturer | Latex source, carrier and any derived residues | GMO statement | Manufacturer | Whether any input or processing aid is genetically modified | Authorisation reference | Supplier or regulator | EU Union list entry, US GRAS basis or GB authorisation ## A buyer's checklist Six questions cover the review: which plant part and latex source; which EU entry, US basis or GB authorisation, with a reference; which carrier; which activity unit and method; which contaminant limits, with the method; and which label statement, including the sensitiser and allergen wording. The source and activity questions are worked through on the identity page, the certificate lines are on the COA page, and the market notes sit under the US and UK regulatory references. The catalog specification is on the papain product page. ### 06 How we prove a papain lot has the declared activity URL: https://nutrition.rainwoodbio.com/products/enzymes/papain/identity/ Reviewed: 2026-11-19 A papain lot is identified at four levels: the latex preparation, the USP casein assay behind the activity figure, the protein that carries it, and the documents tying the lot to the pack. The activity number alone cannot separate a genuine 6,000 USP units/mg powder from a dilution, a blended protease or heat-damaged material. In one lineIdentity is the source, the assay, the protein and the lot code together; a 6,000 USP units/mg result proves only that something in the sample hydrolysed casein. ## The four layers of identity The evidence that makes a papain lot identifiable | Layer | What it establishes | Evidence | Source and preparation | The latex-derived article, not another protease | Botanical name, plant part, CAS, appearance, source statement | Activity | The declared rate under a defined assay | USP casein result, reference standard, method and conditions | Protein | The activity sits on the expected protein | Protein content, specific activity, gel pattern | Paper trail | All three belong to the lot on the dock | COA, lot code, retained sample, specification The material is a preparation from the latex of unripe Carica papaya fruit. The latex contains papain, chymopapain, caricain and glycyl endopeptidase; the preparation carries the mixture, and the casein assay responds to all of them. That is why the source statement and protein pattern carry information the activity number cannot. ## The activity assay, and why the method is part of identity The USP assay incubates a dilution of the powder with Hammersten-type casein at pH 6.0 and 40 °C for 60 minutes, stops it with trichloroacetic acid, reads the filtrate at 280 nm and converts through a standard curve built with USP Papain Reference Standard. Cysteine and edetate keep the active-site thiol reduced and hold metal ions away. Blank, duplicate and standard curve turn an absorbance into a potency. Every step is a variable: casein lot, reference standard, incubation time, wavelength. Two laboratories can report “USP units/mg” and measure different things, so the method reference belongs in the specification. The COA page asks for the standard and conditions beside the result. The assay is a poor identity test: it measures casein hydrolysis, not papain specifically. Another casein-hydrolysing protease contributes to the same absorbance, and so does free tyrosine or an added casein hydrolysate. ## What the USP unit means, and what it does not One USP unit releases the equivalent of 1 µg of tyrosine from the specified casein substrate under the USP assay conditions, at the enzyme concentration that liberates 40 µg of tyrosine per millilitre of test solution. The 6,000 USP units/mg figure is the monograph floor, not a purity percentage or milligrams of papain protein. A lot above it can be diluted to it with lactose or another diluent. The unit is not a TU. A TU is commonly 1 µg of tyrosine released per minute, while the USP and FCC units are anchored to a 60-minute incubation; a 6,000 USP units/mg powder is therefore near 100 TU/mg. The USP versus TU comparison sets out the time base and the conversion risk. For identity the practical point is narrower: a number without its unit and method is not a specification. ## Protein, specific activity and the source Protein is measured by a nitrogen method or a colorimetric assay, and activity divided by protein gives specific activity in USP units per milligram. Dilution lowers activity and protein together, so the ratio can hold while the absolutes fall. Heat damage lowers activity but leaves most protein, so the ratio falls. Added non-enzyme protein raises protein and lowers the ratio without adding activity. A protein pattern by gel electrophoresis adds the shape of the material. Papain is a single-chain cysteine protease of about 23 kDa, and a latex preparation shows the papain band with the other endopeptidases. The pattern is not quantitative, but it is a check against a reference lot and a substitute. A strong activity with an unfamiliar pattern is a question, even when the certificate is complete. ## XRD, and why it does not identify papain A papain preparation is amorphous protein, so XRD produces a broad halo and no reflections characteristic of papain. It cannot separate the latex-derived article from another protease, confirm Carica papaya as the source or measure USP activity. Sharp peaks may belong to lactose or another crystalline diluent, a formulation fact, not identity. X-ray crystallography requires a purified single crystal, not a standardised powder. Identity evidence is the USP casein assay, protein content and specific activity, and an electrophoretic pattern at about 23 kDa against a reference lot. ## The ways a lot can be other than it claims Failure modes for papain and the test that exposes each | Mode | What it looks like | What catches it | Dilution with carrier | Normal powder, activity below the label | Activity and protein both low; carrier statement | Other protease substituted | Casein activity plausible, behaviour differs | Protein pattern, source statement | Heat-inactivated material | Correct appearance, low activity | Activity relative to protein; specific activity | Tyrosine or hydrolysate added | Assay reads high, protein not matching | Blank, protein, specific activity, raw absorbance The first two are the commercial risks. Dilution is allowed when declared and standardised, so the problem is an undeclared dilution sold at the original activity. Substitution is harder: another protease can give a plausible casein result, so the protein pattern and source statement address it. Natural variation is not adulteration: the proportions of the four endopeptidases vary while the powder remains genuine, so compare against a reference pattern, not a fixed ratio. ## Writing the specification so it can be checked A testable papain specification carries the activity as “not less than 6,000 USP units/mg” with the USP casein method named, the source as Carica papaya latex, the carrier identity and amount, loss on drying, pH of a 1% solution, mesh, heavy-metal and microbiological limits, pack, storage and shelf life. Protein or specific activity can be an identity check, not a release limit. Keep the method appendix under change control: a new substrate or standard changes the number's meaning. The activity uses the USP method, but the catalog pH and moisture windows are set for food-grade material. The USP monograph has its own pH and loss-on-drying limits; meeting the activity monograph does not make a lot a full USP article. A customer needing the monograph needs it written and tested separately. ## Five questions to put to a supplier First, which plant part and latex source produced this lot, and can you provide a source statement? Second, which USP method, reference standard and result stand behind the activity? Third, what are the protein content, specific activity and pattern against your reference? Fourth, what test would exclude a dilution, another protease or heat damage, and will you run it? Fifth, which documents carry the same lot code as pack, certificate and retained sample? A supplier who answers all five in writing gives a buyer material to audit; one who answers only the second gives a number. The catalog figures are on the papain product page; certificate lines on the COA page; the grade choice is on the grades page; the release process is on the quality page; and the vocabulary is in the specification glossary entry. ### 02.1 USP vs TU: what a papain unit actually means URL: https://nutrition.rainwoodbio.com/products/enzymes/papain/grades/usp-vs-tu/ Reviewed: 2026-11-19 USP units and TU both measure tyrosine released from casein, but they are not the same unit. The USP unit is defined through the USP casein assay and its reference standard; TU is a supplier convention, commonly defined as 1 µg of tyrosine released per minute. A 6,000 USP units/mg powder is therefore not 6,000 TU/mg, and trade listings often put the same powder near 100 TU/mg. The only conversion worth trusting is a pair of assays run on the same lot. In one lineUSP and TU count tyrosine release on different time bases and against different method details, so the numbers differ by a large factor and no universal conversion factor exists. ## Two units, two definitions The names sound interchangeable because both are built on casein and tyrosine. They are not. A unit is a definition plus a method, and the two systems define the rate differently and report it against different standards. Papain activity units and what each one actually defines | Unit | Definition | Time basis | Where it is used | USP unit | Tyrosine equivalent released from specified casein under the USP assay, at the enzyme concentration giving 40 µg/mL | 60-minute incubation | USP monograph, pharmacopoeial certificates | FCC PU | 1 µg of tyrosine liberated per hour under the FCC casein assay | 60 minutes | Food Chemicals Codex, North American trade | TU | 1 µg of tyrosine liberated per minute under the supplier's casein method | 1 minute | Supplier conventions, common in Asian trade | U/mg, undefined | No substrate, pH, temperature or time stated | — | Not comparable to anything The time base alone explains most of the gap. A unit defined per minute will count about sixty times as many units as a unit defined per hour on the same hydrolysis. ## The substrate and the standard The USP assay uses Hammersten-type casein dispersed in phosphate buffer, adjusted to pH 6.0, incubated for 60 minutes at 40 °C and stopped with trichloroacetic acid. The filtrate is read at 280 nm, and the result is interpolated from a standard curve built with USP Papain Reference Standard. The buffer contains cysteine and edetate: the reducing agent keeps the active-site cysteine in its thiol form, and the chelator holds back metal ions that would oxidise it or compete for the site. Casein is not a single pure molecule. Different casein grades, substrate concentrations and precipitation steps change the amount of tyrosine-containing peptide that reaches the absorbance reading. The USP method controls this by fixing the substrate preparation and by expressing the result against a reference standard rather than against an absolute extinction coefficient. A TU method that uses a different casein lot, a different buffer or a different reading wavelength is a different assay, even if the unit name is the same. ## Conditions that move the figure USP and typical TU assay conditions compared | Condition | USP assay | Typical TU method | Why the result moves | pH | 6.0 | 6.0 or 7.0 depending on the method sheet | Papain is not equally active across its pH window | Temperature | 40 °C | 40 °C, sometimes 37 °C | A rate at one temperature is not a rate at another | Incubation time | 60 minutes | Rate expressed per minute | Time base changes the number by a large factor | Detection | Absorbance at 280 nm | 275 nm or a colorimetric finish | Different signals and calibration curves | Standard | USP Papain Reference Standard | In-house standard, sometimes calibrated to USP | The standard anchors the scale The USP definition also includes the 40 µg/mL normalization. Drop that step and the number may still look like a USP unit, but it is not one. This is why a certificate should say more than “USP method”: it should name the reference standard, the substrate, the pH, the temperature and the incubation time. ## Why 6,000 USP/mg is not 6,000 TU/mg If TU is defined per minute and the USP unit is anchored to a 60-minute incubation, a powder at 6,000 USP units/mg sits near 100 TU/mg. Some trade listings for a 6,000 USP units/mg papain quote roughly 90–110 TU/mg, which is the same material described on two time bases. The factor is about sixty, but only while the substrate, pH, temperature, detection and standard stay equivalent. Change any of those and the ratio moves. A TU method at pH 7.0 can read differently from a USP assay at pH 6.0; a colorimetric finish can disagree with absorbance at 280 nm; an in-house standard can drift from the USP reference. A supplier who quotes 6,000 TU/mg for a 6,000 USP units/mg powder has either defined TU on a different basis or made an error. What is exact is the total unit count inside one system. One kilogram at 6,000 USP units/mg carries 6 × 109 USP units; the same kilogram at 100 TU/mg carries 108 TU. Both statements describe the same powder, and neither can be converted into the other without an assay. The identity page makes the unit part of the material description for this reason. ## What the label and specification should say Under the EU food enzyme framework, a food enzyme preparation sold to a manufacturer carries its declared activity in the stated unit, together with the name, the food-use statement, the lot and the storage conditions. In the United States the activity is a specification, not a nutrient, so it does not belong in a nutrition panel as though it had a daily value; if the enzyme has a function in the finished food, the ingredient declaration names it. The UK follows assimilated EU law, with its own authorisation route. In every market the label needs the unit, and the specification needs the method. “USP” is a pharmacopoeial designation. Writing “6,000 USP units/mg” says which assay produced the figure; it does not by itself certify the lot as a USP article, because the monograph also sets pH and loss-on-drying limits that a food-grade specification may set differently. If a customer needs the full monograph, that is a separate specification and should be quoted as one. State the basis as well: activity as-is or on dry solids, and at release or at the end of shelf life. ## Which unit to specify Specify the unit the customer's specification and your goods-in method can actually verify. Choose USP units/mg when the buyer is in the United States, when the purchase order or the pharmacopoeial reference is written in USP units, or when the blend is already dosed in USP units. Choose TU when the supplier's existing system and the customer's formula are both in TU, and the method sheet defines the time base. Do not mix the two in one formula without a measured bridge. If both figures are needed, put one in the specification as the release criterion and the other on the certificate as an informational result, and run both assays on the same lot. A calculated second figure is not a measurement. The catalog activity and the grade options are on the grades page; the certificate lines are on the COA page; the unit vocabulary is in the assay glossary entry; and the product specification is on the papain product page. ### 01 What the COA for niacin actually contains URL: https://nutrition.rainwoodbio.com/products/vitamins/niacin/coa/ Reviewed: 2026-11-19 The certificate for a niacin lot reports appearance, identification by IR and UV, assay by titration on the dried basis, melting range, loss on drying, residue on ignition, chloride, sulfate, the heavy-metal panel, particle size and microbiology. Each line should name the test, the method and the limit the lot was released against. The values on this page are the catalog specification for nicotinic acid; the batch COA carries the result for one drum. A figure near 100% does not, by itself, separate niacin from niacinamide. In one lineThe titration counts acid groups; the melting range and the two limit tests say that the acid is nicotinic acid. ## The certificate as a test report A certificate becomes auditable when a reviewer can rebuild the release decision from the page. Each row needs the parameter, the method that produced the number, and the limit the lot was measured against. The tables below hold the catalog limits for this grade, not the outcome of a particular lot. Identity, assay and physical tests · niacin (nicotinic acid) | Parameter | Method | Release limit | Appearance | Visual | White to slightly yellow crystalline powder | Identification | IR and UV against a reference spectrum | Conforms | Assay, dried basis | Acid–base titration | 99.0–101.0% | Melting range | Capillary method | 234–238 °C | Loss on drying | Gravimetric, 105 °C | ≤1.0% | Residue on ignition | Gravimetric | ≤0.1% | Particle size | Sieve analysis | ≥95% through 40 mesh Limit tests, contaminants and microbiology · niacin | Parameter | Method | Release limit | Chloride | Comparative limit test | ≤0.02% | Sulfate | Comparative limit test | ≤0.02% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent The set follows the monograph pattern for nicotinic acid: titration on the dried basis, melting range, and chloride and sulfate as comparative limit tests at 0.02%. A pharmacopoeial grade is agreed against the current monograph, and the certificate cites that edition. ## What each figure is measured against The assay is a direct acid–base titration of the carboxylic acid, and the arithmetic is one mole of base per mole of nicotinic acid. The result is calculated on the dried substance, which is why the loss-on-drying figure sits beside it. Take a lot at the top of the assay window that carries 0.8% water: the as-is figure lands about a point lower, both figures can be correct, and a quotation that omits the basis is comparing two different measurements. Water is the easiest diluent to add to any powder, so an as-is assay rewards a damp lot; the dried basis pushes water into its own row, where the ≤1.0% limit applies. HPLC does a different job. The catalog names titration and HPLC as the methods for the grade; the assay figure is the titration, while the chromatographic run supports identification and the related-substance picture, looking for the amide, the positional isomer and residual nitrile from the synthetic route. The specification can set a limit for each named impurity, and that limit belongs on the certificate rather than in a separate letter. Chloride and sulfate are limit tests, not assays. They compare the sample against a standard under fixed conditions and answer a yes-or-no question at 0.02%. They are worth keeping because they point at the process: hydrochloric or sulfuric acid used in the route, or process water that was not fully removed, shows up here first. Neither figure is a purity percentage, and neither can be added to the assay. The melting range is an identity check. A pure crystalline lot melts inside 234–238 °C within a narrow span. A blend, a salt or a wet lot melts low, broad or in two steps, even where the titration lands inside the assay window. Literature values sit a few degrees higher; this range is the release window. ## Release limit versus batch result The release limit is the acceptance boundary; the batch result is what the laboratory measured on that drum. Both belong on the certificate, in separate columns, with the method named. A result column that repeats the specification range is not a result — it is a copy of the gate. Some rows legitimately carry “conforms” — identification and the limit tests are comparisons — but the certificate should name the reference and limit behind that word. When a result lands at the edge, the useful next step is a repeat on the retained sample with the same method, not a re-issued certificate with different rounding. One result just under the chloride limit says less than three lots creeping upward across a year; the trend is the conversation. Units need the same care: metals in mg/kg, assay in per cent on the dried basis, particle size as the fraction passing a stated mesh. ## What moves between batches The assay window is narrow and usually well controlled; the figures tied to handling move more. Loss on drying tracks the drier and the pack. Chloride and sulfate track the acid charge and the wash. Particle size tracks the mill and the sieve; 40 mesh and 80 mesh behave differently on a capsule line. Colour is the least quantitative signal and often the most useful. The specification allows white to slightly yellow; a deeper yellow or a brown tint can come from a hot drying step, a trace of iron or a long spell in a warm warehouse, and it can appear while the assay still passes. Ask for the batch record and the storage history before rejecting on colour alone. ## When an outside test is worth it Commission an independent test for a new source, a first regulated shipment, a disputed result, or a lot whose form is claimed but not demonstrated. The useful panel is targeted: IR against a reference, melting range, titration plus the HPLC related-substance scan, and ICP-MS for the metals panel, all on one submitted sample. Ask the laboratory to report its detection and quantification limits. A “not detected” line without a limit describes the method, not the sample. For a dispute, the referee needs the retained sample, the supplier's certificate and the agreed specification, and the chain of custody should connect the sample tested to the lot code on the drum. ## What to compare between suppliers Six lines carry most of the comparison: the form as named, with its CAS number; the assay method and the basis it is calculated on; the melting range as a result, not a range; the chloride and sulfate results; loss on drying and particle size; and the metals and microbiology panels. Two quotations that agree on assay but diverge on the other five are not describing the same powder. Lot traceability is the second layer: the code should be identical on the certificate, the drum label and the retained sample, and the certificate should name the manufacturer. The catalog limits sit on the niacin product page. The two vitamin B3 forms are compared on the grade page, and the tests that separate them are on the identity page. The release workflow is described on the quality page, and the chromatographic method in the HPLC method note. ### 02 Niacin or niacinamide: choosing a vitamin B3 grade URL: https://nutrition.rainwoodbio.com/products/vitamins/niacin/grades/ Reviewed: 2026-11-19 Both materials are sold as vitamin B3, so the grade question is a molecule question. Niacin here means nicotinic acid, CAS 59-67-6: 99.0–101.0% by titration on the dried basis, melting 234–238 °C, sparingly soluble in water and acidic in solution. Niacinamide, CAS 98-92-0, is the amide: freely soluble, close to neutral and a different label ingredient. The choice follows the dosage form, the pH the matrix can carry and the ingredient name the label will use. In one lineThe grade question is not which powder is purer; it is which molecule the formula and the label can carry. ## Why “niacin” is not one grade Vitamin B3 is a family name, and it covers more than one substance. In the EU the permitted-forms list for niacin names nicotinic acid and nicotinamide; the US Supplement Facts line can read “Niacin (as niacinamide)”; the UK retains the same two entries. None of those texts use the acid and the amide interchangeably, because they are not: different CAS numbers, different melting ranges, different solubility, different behaviour in a blend. A brief that asks for “vitamin B3, 100 mg” has not chosen a material. It has chosen a nutrient figure. The grade decision has to be made before the specification is written, because the certificate, the label and the release method all follow from it. ## The two forms side by side Niacin (nicotinic acid) and niacinamide · identity and handling | Property | Niacin, nicotinic acid | Niacinamide | CAS number | 59-67-6 | 98-92-0 | Molecular formula | C6H5NO2 | C6H6N2O | Assay and method | 99.0–101.0% by titration, dried basis | 99.0–101.0% by HPLC | Melting range | 234–238 °C | 128–131 °C | Water solubility | Sparingly soluble | Freely soluble | Reaction in solution | Acidic | Close to neutral | Flush, immediate release | Reported by many people | Not reported at supplement doses The melting range separates them by more than a hundred degrees, which makes a blend visible in a single test. The assay columns use different methods for the same reason: the acid carries a titratable proton, the amide does not. ## What the acid does to the matrix Nicotinic acid carries a carboxylic acid group that ionises in water, so it acidifies whatever it is dissolved or dispersed in. In a tablet that is usually tolerable; in a drink mix it is the first thing the formulator notices. The acid also reacts with alkaline ingredients. Sodium bicarbonate, calcium carbonate and magnesium hydroxide will neutralise it to a nicotinate salt, and a carbonate will release carbon dioxide while doing so. That reaction is not a defect in the raw material, but it changes the blend: part of the niacin is now a salt, the pH rises, and the taste shifts. The amide has none of that chemistry. It dissolves readily, leaves the pH close to neutral and does not react with carbonate. The trade-off is physical: the amide is hygroscopic, so the pack and the dispensing room carry a moisture requirement that the acid does not, and a freely soluble powder dissolves rather than disperses, which changes the mouthfeel of a sachet. Particle size belongs in the same conversation. The catalog grade is a crystalline powder at 40 mesh, milled to 80 mesh or granulated on request. At low doses per tablet, a finer powder distributes better; on a high-speed press, flow and segregation decide. ## Matching the form to the dosage form Tablets and capsules. The acid is the usual choice when the label says niacin and the dose is modest. It is a crystalline powder that runs on a tablet press at 40 mesh, and the acidity is buffered by the excipients around it. A coated tablet can keep the acid away from a sensitive ingredient in a combination. Stick packs and drink mixes. The amide is easier: it dissolves clear, tastes neutral and does not drop the pH of the sachet. The acid works in a deliberately acidic matrix, such as a fruit-flavoured powder, where its sour note is part of the profile. Effervescent systems. The acid and the carbonate in the system will react. A formulator can use that deliberately, but the label, the assay and the pH all have to be built around the salt that results; it is not a drop-in switch. Gummies and chewables. The amide avoids the sour taste and the local acidity that a chewable can leave. The acid is workable only where the recipe already leans acidic and the taste has been built for it. ## How the grade is written into the specification The specification should name the molecule, not the vitamin. “Niacin (nicotinic acid), CAS 59-67-6, 99.0–101.0% on the dried basis by titration, melting range 234–238 °C, loss on drying ≤1.0%, chloride ≤0.02%, sulfate ≤0.02%, ≥95% through 40 mesh” leaves nothing to interpretation. A line that says only “niacin 99%” can be met by either molecule, and it gives the label no name to check. Three details are worth writing down with it. State the assay basis, because as-is and dried figures differ by the water content. State the mesh, because it changes flow and content uniformity. And state which monograph or in-house method the release uses, so that a second laboratory can reproduce the result. On the label, the form is part of the ingredient declaration. The nutrient figure is calculated in niacin equivalents, where both forms count one milligram as one milligram NE, so the number does not change when the form changes; the ingredient name does. That is why a late switch is a labelling event as well as a formulation one. ## When neither form is the right answer Some briefs are really a request for a different substance. Inositol hexanicotinate and other niacin esters are separate materials with their own specifications, and a request for a niacin product without the flush is usually a request for one of those or for the amide. The catalog niacin is the free acid, and it should not be sold as something else. Where the formula cannot tolerate an acidic ingredient but the label can name any vitamin B3 form, the amide is the honest route, and the label reads niacinamide. A blend of the two forms is a third product again: it needs its own assay, its own label figure and its own stability data. The forms are compared line by line on niacin vs niacinamide. The catalog limits are on the niacin product page, the release tests on the COA page, and the label and market rules on the compliance page. The specification terms themselves are defined in the specification glossary entry. ### 03 Niacin is stable dry; moisture and the matrix decide the rest URL: https://nutrition.rainwoodbio.com/products/vitamins/niacin/stability/ Reviewed: 2026-11-19 Nicotinic acid is a pyridine carboxylic acid with no oxidisable side chain, no ester and no amide, so a dry crystalline lot in a sealed pack at room temperature holds its assay over a multi-year interval. What fails is physical: moisture pickup and caking, segregation of fines, and in a formula the pH shift when the acid meets an alkaline excipient. The pack and the matrix set the shelf life, not the calendar. In one lineDry, the crystal is the stable part; water, alkali and process heat are what move the result. ## The dry solid and its one weakness Niacin is not a deliquescent powder. It takes up little water at ordinary humidity, which is why a 25 kg drum can sit in a warehouse for a year without the assay moving. The weakness is at the surface: fine particles adsorb moisture, the adsorbed layer bridges particles under stack load, and the drum arrives as a lump. The loss-on-drying limit of ≤1.0% is generous enough that a caked lot can still pass it, so caking is a handling finding rather than a specification failure. Two habits prevent most of it. Keep the inner liner closed between dispensings, and let a cold drum reach room temperature before opening it, so that condensation forms on the outside of the liner rather than on the powder. A 1 kg foil pouch is the better pack for intermittent use; a drum is the better pack for a single production run. Temperature is not the risk it is for a vitamin with an unsaturated side chain. The melting range starts at 234 °C, far above any warehouse or drying temperature, so a dry lot has no thermal ceiling in normal storage. The process is where heat matters, and mostly for colour. ## In water, acid and alkali The acid is sparingly soluble in cold water and more soluble hot. What dissolves ionises: the carboxylic proton goes, the solution turns acidic, and the pH of a saturated solution sits well below neutral. That acidity is the material's defining behaviour in a formula, and it is also the reason a niacin solution is not a neutral beverage base. Add alkali and the picture changes. Sodium hydroxide, sodium bicarbonate or calcium carbonate neutralise the acid to a nicotinate salt, which is far more soluble and close to neutral. With a carbonate the reaction releases carbon dioxide, so an effervescent blend will lose its gas to the niacin rather than to the consumer. This is chemistry, not a defect, but it means the blend is no longer the same material as the drum. In a liquid that contains ethanol, the acid can esterify slowly over months. The reaction is slow at room temperature, and it is the kind of change that a two-week accelerated study will not catch. If the formula is an alcoholic tincture or a liquid with a high alcohol content, the stability protocol needs a real-time arm. ## What actually moves the result Stress factors · niacin powder and niacin in a formula | Factor | What it does | Control | Humidity cycling | Caking, loss-on-drying drift, poor flow | Sealed liner, dry dispensing room, first-in first-out | Process heat | Colour shift near the melt; no assay loss below it | Drying below 80 °C, short granulation time | Alkaline excipients | Salt formation, gas release, pH rise | Buffer the blend or use the amide | Water in the matrix | Acidity at the surface, taste, corrosion of tooling | pH target and a real-time arm | Alcohol in the matrix | Slow esterification over months | Real-time data, not accelerated alone | Light | Yellowing of solutions | Opaque or amber pack | Compression | No chemical change; hardness and dissolution move | Validate the blend, not the powder ## A stability protocol for this material For the powder, the useful design is two conditions — 25 °C/60% RH and 40 °C/75% RH — with pulls at zero, three and six months, and a full year on the long-term arm. Test assay by titration on the dried basis, related substances by HPLC, loss on drying, appearance, pH of a dispersion and particle size. Three lots at pilot or production scale is the usual starting point, and the lot tested should be the lot released. For the finished product, the powder panel is not enough. Add the tests the dosage form lives by: hardness and disintegration or dissolution for a tablet, moisture and water activity for a sachet, pH and taste for a drink. A niacin tablet that passes assay at six months can still fail dissolution because the acid has reacted at the surface of the granule. One design point is easy to miss: the specification applies to the raw material. Once the acid is partly neutralised in a blend, a titration of the free acid no longer measures the label claim. The blend needs its own method and its own validation. ## Where formulation decides the outcome Wet granulation is the step that puts water next to the acid. If the binder is alkaline, the granulation is a neutralisation; if it is neutral, the risk is limited to drying and to the residual moisture that stays in the granule. Either way, the granulation's own stability data decide the shelf life, not the powder's. In an effervescent system, the acid competes with the acid source for the carbonate. That is a formulation choice with a label consequence: the amount of carbonate has to be set against the niacin, and the blend's pH after dissolution is a release test in its own right. Combination products deserve a separate look. An alkaline mineral salt, a carbonate buffer or a basic amino acid can neutralise part of the niacin in a blend that also contains a moisture source. The interaction is slow in a dry blend and fast in a wet one. ## Setting the shelf life The catalog does not fix a retest interval in the specification. It is agreed at order, stated on the certificate and supported by the stability file. A retest date is not an expiry date: at retest the lot is measured again, and it is released for further use only if it still meets the specification. For the finished product, shelf life is assigned from the formula data, in the market pack, at the storage condition the label states. A shelf life borrowed from the powder is not evidence about a tablet. The retained sample closes the loop: it lets a later result be checked against the lot as shipped. The pack discussion continues on the packaging and ordering page. The release tests that the stability pulls repeat are on the COA page, and the moisture limit is explained in the loss-on-drying note. The catalog limits sit on the niacin product page. ### 04 Niacin: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/vitamins/niacin/moq/ Reviewed: 2026-11-19 The minimum order for niacin is 1 kg, packed in a foil pouch; the same released material goes into a 25 kg fiber drum when the order is larger. Lead time is 1–7 days from order confirmation and depends on the pack, the particle size and the documents that travel with the shipment. A quotation needs six details before it is a quotation rather than a range, and the kilogram is the unit that makes the rest of the paperwork possible. In one lineThe kilogram is the smallest unit that carries a lot number, a certificate and a retained sample; the drum is the same lot in a larger pack. ## Why the minimum is one kilogram A minimum order is often read as a commercial threshold. For a released lot it is a traceability threshold. One kilogram is enough material to draw a sample, run the release panel, keep a retained sample and still ship a usable quantity. Below that, the lot number and the certificate stop doing useful work, and a buyer cannot repeat a test on the same material. The kilogram also matches the trial scale. A thousand capsules at 100 mg each need about 100 g of niacin before overage and losses, so a 1 kg pouch covers a pilot batch with material to spare for a second attempt. What it does not cover is press behaviour: a kilogram proves the chemistry and the identity, not how the powder will run on a production tablet press at speed. That question needs a drum and a trial on the line. Orders above the minimum are not a different grade. The material in the drum is drawn from the same released lot as the pouch where the order allows it, and the certificate carries the same lot code. Where the quantity exceeds a single lot, the shipment carries one certificate per lot, and the packs are labelled accordingly. ## Packs, formats and labels Niacin packs · net weight and typical use | Pack | Net weight | Format | Typical use | Foil pouch, heat sealed, in a carton | 1 kg | 40 mesh crystalline; 80 mesh milled on request | Trial batches, small runs, sample retention | Fiber drum with double polyethylene liner | 25 kg | 40 mesh crystalline; milled or granulated on request | Production runs, single-lot campaigns Three formats are available: the standard crystalline powder at 40 mesh, a milled 80 mesh grade, and a granulated grade. The mesh matters more than it looks. A finer powder distributes better in a low-dose tablet; a granulated powder flows better and generates less dust. The format is fixed at order because it changes the milling step and the lead time. Each pack carries the product name with the form, the CAS number, the lot code, the net weight, the assay, the retest date and the storage condition. The lot code on the pack must match the certificate and the retained sample; if it does not, the certificate describes a different drum. ## Lead time and what moves it The standard lead time is 1–7 days from order confirmation. The low end applies to a 1 kg or 25 kg order of the 40 mesh grade with the standard document pack. The high end applies when the order needs milling to 80 mesh, granulation, extra testing or a document set for a market the file has not covered before. Release is the other clock. Material ships after the lot has been released against the specification, not before, so an order placed against a lot still in testing waits for the result. If the delivery date is fixed, say so at enquiry: it changes which lot is reserved and whether the format can be changed without a new milling run. ## The six details a quotation needs Six inputs for a niacin quotation | Detail | Why it changes the answer | Form and grade, with the specification or monograph | Nicotinic acid and niacinamide are different materials; a pharmacopoeial grade and a catalog grade are released against different limits | Quantity and pack | 1 kg pouch and 25 kg drum are different packing lines and different minimum quantities | Particle size or granulation | 40 mesh, 80 mesh and granulated are separate preparation steps | Destination and delivery term | Sets the document set, the labelling language and the transport paperwork | Market and documents required | EU, US and UK files differ; a specification alone is not a compliance file | Any special requirement | Split deliveries, pallet configuration, customer labelling, additional testing An enquiry that supplies all six gets a firm answer. One that supplies a product name and a tonnage gets a range, because the answer depends on the other five lines. ## Samples and receipt testing A sample is drawn from a released lot and travels with that lot's certificate. It is the same material as the commercial pack, not a separate bench batch, which is the point: a sample from a different batch tells the buyer nothing about the drum that will arrive. On receipt, the buyer's own identity test belongs in the file. US cGMP requires identity testing of each component before use, and the EU and UK quality systems expect the same discipline. The minimum useful receipt test is identification by IR plus a melting range; an assay by titration on the dried basis is the natural next step, and the metals panel can follow the risk assessment rather than every delivery. Keep a portion of every delivery as a retained sample, sealed and labelled with the lot code. It is the only material that can answer a question about that shipment six months later. ## What is agreed in writing The order confirmation should state the form and grade, the pack and net weight, the lot code and certificate, the retest date, the document set, the delivery term and the point at which risk passes. It should also state the claims window and the retained-sample period, because a quality question raised after the window is harder to resolve for both sides. Partial shipments and split packs are worth naming in advance: a 25 kg drum split into five pouches is a repacking operation, and the lot code and certificate have to follow the material through it. Where the buyer repacks, the repacker owns the traceability from that point. The pack and order terms sit beside the release tests on the COA page; the market documents that decide the document set are on the compliance page; the catalog limits are on the niacin product page. The minimum-order term itself is defined in the MOQ glossary entry. ### 05 Where niacin is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/vitamins/niacin/compliance/ Reviewed: 2026-11-19 Niacin — the free acid, nicotinic acid — is a permitted vitamin form for food supplements in the European Union and the United Kingdom, and a dietary ingredient in the United States. Permission attaches to the named form and the product category, not to the words “vitamin B3”. The file then has to show the form on the label, the niacin figure in the required unit, the contaminant results against the destination limits, and claims inside the authorised wording. This is the framework as of November 2026; the current text decides. In one lineThe permission is for the form, the certificate is for the lot, and the claim is a third document. ## The four checks The first check is the permitted identity: which substance, in which form, may be sold in the product category. The second is the contaminant limit, applied to the product as sold. The third is the label, which has to name the form and declare the nutrient in the unit the market requires. The fourth is the claim, with its own authorisation and evidence; it cannot be inherited from the ingredient permission. The checks fail independently: a lot can pass every contaminant limit and still be mislabelled. ## European Union Directive 2002/46/EC is the food supplement instrument. Annex I lists the vitamins and minerals that may be used, and niacin is one of them. Annex II lists the permitted forms; nicotinic acid and nicotinamide both appear, which is why the form has to be named on the label and matched on the certificate. Contaminants for food supplements sit in Regulation (EU) 2023/915. At the point of sale a supplement must stay within 3.0 mg/kg lead, 1.0 mg/kg cadmium and 0.10 mg/kg mercury. Arsenic is not harmonised at EU level, so a Member State may apply its own figure; the specification in this catalog carries its own limit instead. Labelling follows Regulation (EU) No 1169/2011 together with the supplement particulars in the Directive: the words “food supplement”, the vitamin name, the amount per portion, the percentage of the nutrient reference value, a warning not to exceed the stated daily dose, a keep-out-of-reach warning and a statement that the product is not a substitute for a varied diet. The EU nutrient reference value for niacin is 16 mg NE, and the percentage is calculated against it. ## United States Niacin is a dietary ingredient under DSHEA. The file should state the basis on which the ingredient is marketed — pre-1994 history, a GRAS conclusion or a new dietary ingredient notification — and keep the evidence with it. 21 CFR 101.36 sets the Supplement Facts panel. Niacin is declared in milligrams of niacin equivalents and as a percentage of the 16 mg NE Daily Value for adults and children four years and older, and the source line names the form, for example “Niacin (as nicotinic acid)”. That name has to match the certificate. The cGMP rule in 21 CFR 111 requires identity testing of each component, so the buyer's own identity test on receipt is part of the file. Federal law sets no lead maximum for dietary supplements; California's Proposition 65 sets exposure thresholds that many buyers work to, and a mg/kg figure alone does not answer the question — the daily dose has to be modelled against the threshold. And niacin has a drug history at high doses, so the supplement file has to stay in the dietary-supplement lane with structure/function wording and the DSHEA disclaimer, not a drug claim. ## United Kingdom The UK applies the retained food supplement lists, including the permitted niacin forms, and the same 16 mg NE reference value. The GB nutrition and health claims register carries the authorised wording. Northern Ireland still follows the EU lists under the Windsor Framework, so GB and NI labels are checked separately. ## The contaminant table Heavy metals · catalog limit and market position, food supplements | Element | Catalog limit on the powder | EU supplement limit | US federal position | Lead (Pb) | ≤3 mg/kg | 3.0 mg/kg | No federal maximum for supplements; state rules such as Prop 65 may apply | Cadmium (Cd) | ≤1 mg/kg | 1.0 mg/kg | No federal maximum specific to supplements | Mercury (Hg) | ≤0.1 mg/kg | 0.10 mg/kg | No federal maximum specific to supplements | Arsenic (As) | ≤2 mg/kg | Not harmonised; Member State rules may apply | No federal maximum specific to supplements Material and product limits are different numbers. The table above applies to the powder as shipped; the regulation applies to the supplement as sold, after dilution by excipients and division into doses. A powder that meets the material limit will normally meet the product limit, but the calculation has to be made and kept, because a high-dose single-ingredient tablet barely dilutes the powder at all. ## Labels, the flush and the claim boundary Permission to use the ingredient is not permission to make a claim. In the EU, health claims are authorised by Regulation (EC) No 1924/2006 and listed in Regulation (EU) No 432/2012; only the authorised wording may be used. In the US, a structure/function statement is the brand's responsibility, must be substantiated and carries the DSHEA disclaimer. In the UK, the GB register lists the wording that may be used. No disease claim is available in any of the three markets. The flush is separate. Immediate-release nicotinic acid produces a transient flush in many people, and the ingredient name tells a reader which form the product contains. Neither EU nor US law requires a flush statement on a niacin supplement label as of this review; whether to add one is a brand decision, and it has to be worded as a sensory effect, not as a health claim. The form name itself is an ingredient declaration, not a claim. ## The document pack - Batch COA with identification, titration assay on the dried basis, melting range, loss on drying, chloride, sulfate, metals and microbiology. - Specification and technical data sheet naming the form, the CAS number and the assay basis. - Safety data sheet with the standard sixteen sections. - Contaminant report against the destination limits, including the arsenic decision. - Nutrition declaration worksheet showing the niacin contribution per portion and the percentage of the NRV or Daily Value. - Statement of manufacture and country of origin, plus allergen and GMO statements where required. ## The checks before a shipment - The certificate names nicotinic acid, with CAS 59-67-6, not “vitamin B3”. - The label ingredient line names the same form as the certificate. - The niacin figure per portion is calculated in niacin equivalents and checked against 16 mg NE. - The contaminant results are compared with the product as sold, not only the powder. - The arsenic position is decided and documented for the destination. - The claim wording is copied from the authorised list, or there is no claim. - The warning texts required by the market are present and complete. - The buyer holds its own identity test on receipt. The instrument behind each row is described on the EU regulatory page, the US regulatory page and the UK regulatory page. The release tests are on the COA page, the identity checks on the identity page, and the catalog limits on the niacin product page. ### 06 How we prove a niacin lot is nicotinic acid URL: https://nutrition.rainwoodbio.com/products/vitamins/niacin/identity/ Reviewed: 2026-11-19 Four checks carry the proof: identification by IR and UV against a reference, a melting range inside 234–238 °C, an assay by titration on the dried basis inside 99.0–101.0%, and the chloride and sulfate limit tests, which a blended or substituted lot tends to fail first. One assay figure proves that acid groups are present in the expected proportion; it does not prove that they sit on a pyridine ring in the 3-position. The certificate has to carry the identity lines, and the specification has to say what the laboratory compared against. In one lineThe assay counts acid groups; the IR, the melting range and the two limit tests say those groups belong to nicotinic acid. ## Four layers, four different questions Identity is not one test. Each layer answers a question the others cannot, and a supplier who offers only an assay has answered the narrowest one. Identity layers · what each test proves and what it cannot | Layer | Test | What it proves | Spectral | IR and UV against a reference | The functional groups and the substitution pattern of the ring | Thermal | Melting range, capillary method | A pure crystalline solid of the expected substance; mixtures melt low or broad | Titrimetric | Acid–base titration, dried basis | Acid content and equivalent weight consistent with the molecule | Process profile | Chloride, sulfate, residue on ignition, HPLC scan | No salt load or process residue, and no co-eluting related substance The layers are deliberately redundant. A blend can be made to titrate correctly by adding an acid, but the same blend rarely keeps a sharp melt, a matching IR and a low chloride figure at once. That redundancy is the point. ## One mole of base per mole of acid The titration rests on a fixed ratio: one mole of sodium hydroxide neutralises one mole of nicotinic acid. The equivalence weight is therefore 123.11 g/mol, and the assay is that measured acidity expressed as a percentage of the theoretical figure on the dried basis. The ratio is what makes the test specific to an acid of this size, and it is also what limits it. A neutral diluent — lactose, dextrose, starch — consumes no base, so it lowers the assay and takes the melting range down with it. A nicotinate salt is already neutralised: sodium or calcium nicotinate does not titrate as the free acid, the pH of the dispersion turns alkaline, and the residue on ignition climbs with the metal. Niacinamide has no acid proton at all, so a blend of the two forms reads low on the titration even though both are vitamin B3. The titration cannot separate the 3-isomer from the 4-isomer. Isonicotinic acid has the same molecular weight and the same acidic group, so it consumes base in the same ratio. What separates them is the IR spectrum and the melting range, which is why the identity layer is not optional for a material that is bought as a positional name. ## X-ray diffraction and the solid form Nicotinic acid is sold as a crystalline powder, and a diffraction pattern is a fingerprint of that crystal. X-ray diffraction confirms the crystalline phase, shows whether a second crystalline phase is present, and detects crystalline diluents such as lactose, dextrose or sodium chloride in a blend. It does not measure purity, and it is a poor detector of an amorphous filler, which scatters broadly rather than in sharp peaks. Peak position is the identity information; peak width is not. A milled 80 mesh lot has smaller crystallites than a 40 mesh lot, so its peaks are broader, but the positions stay the same. A pattern with extra peaks at new positions is a different solid, not a different particle size. The test earns its place in three situations: a new source that has not been audited, a lot whose melting range is broad, and a dispute where the other side's certificate shows a clean assay but an odd thermal result. Ask the laboratory to report the reference pattern it compared against. ## The substitutions that turn up Niacin substitutions · the signal and the test that catches it | Substitution | What the buyer sees | What catches it | Niacinamide blended in | Low titration, low and broad melt | Melting range, IR, HPLC | Sodium or calcium nicotinate | Low titration, alkaline dispersion, higher residue | Residue on ignition, pH, IR | Neutral diluent | Low assay, melt depressed, loss on drying may rise | Assay with IR; XRD for a crystalline filler | Inositol hexanicotinate | Very low titration, poor solubility, low melt | Solubility, assay, IR | Positional isomer | Assay inside the window | Melting range, IR and UV The last row is the one an assay-only programme misses. Every other row moves the titration, and most move the loss on drying or the residue as well. An isomer does not, so a certificate with a good assay and no spectral identity is not evidence that the material is the 3-isomer. ## Writing the specification so the proof is possible Specification wording should let a second laboratory reach the same answer. A workable line reads: “Niacin (nicotinic acid), CAS 59-67-6, 99.0–101.0% on the dried basis by titration, identification by IR and UV conforming to the reference, melting range 234–238 °C, loss on drying ≤1.0%, residue on ignition ≤0.1%, chloride ≤0.02%, sulfate ≤0.02%, heavy metals within the catalog panel, ≥95% through 40 mesh.” Three habits make that line stronger. Name the form and the CAS number rather than the vitamin. Say which reference standard or monograph the identity comparison used. And state the basis for the assay, because an as-is figure and a dried-basis figure are not the same claim. The full limit set is on the COA page, and the specification terms are defined in the specification glossary entry. ## Five questions for a supplier First, which monograph edition or in-house method released this lot, and can the identification comparison be shown? Second, what was the melting range result for this lot, as a number rather than the range printed on the specification? Third, was the assay calculated on the dried basis, and what was the loss on drying? Fourth, are the chloride and sulfate lines results or “conforms”, and against which standard were they compared? Fifth, is the lot 100% nicotinic acid, or has it been blended or repacked since manufacture, and who manufactured it? A supplier who answers all five has nothing to hide in the certificate. A supplier who answers only the assay has given a number, not an identity. The comparison between the two vitamin B3 forms is set out on the grade page and in the niacin vs niacinamide note; the infrared method itself is described in the FTIR method note, and the catalog limits are on the niacin product page. ### 02.1 Niacin vs niacinamide: acid, flush and the label URL: https://nutrition.rainwoodbio.com/products/vitamins/niacin/grades/niacin-vs-niacinamide/ Reviewed: 2026-11-19 Niacin is the carboxylic acid; niacinamide is the amide. The acid group is what separates them in a formula: it lowers the pH, forms salts with alkaline ingredients, and in many people produces a transient flush that the amide does not. The label has to name the form actually used, because “vitamin B3” does not distinguish them, and the two sit as separate entries on the permitted-forms lists. In one lineOne vitamin name, two functional groups: the acid decides the pH, the flush and the label line. ## Two molecules, one nutrient name Both are pyridine derivatives with the substituent at the 3-position. In nicotinic acid it is a carboxyl group; in niacinamide it is a carboxamide. That single change moves the melting range by more than a hundred degrees, turns a freely soluble powder into a sparingly soluble one, and turns a near-neutral solution acidic. Niacin and niacinamide · the numbers that separate them | Property | Niacin (nicotinic acid) | Niacinamide | CAS number | 59-67-6 | 98-92-0 | Molecular formula | C6H5NO2 | C6H6N2O | Molecular weight | 123.11 g/mol | 122.12 g/mol | Melting range | 234–238 °C | 128–131 °C | Water solubility | Sparingly soluble | Freely soluble | Solution reaction | Acidic | Close to neutral The molecular weights differ by less than one per cent, which matters for the label: a milligram-for-milligram switch keeps the declared niacin figure almost unchanged. What changes is the ingredient name and everything that follows from the acid. ## What the acid does that the amide does not Nicotinic acid carries a carboxylic proton that ionises in water. Dissolved or dispersed, it lowers the pH of the matrix, and it reacts with any base it meets. Sodium bicarbonate and calcium carbonate neutralise it to a nicotinate salt and release carbon dioxide; magnesium hydroxide does the same without the gas. In an effervescent system that reaction competes with the carbonate that is supposed to produce the fizz. The consequences reach the bench. A wet granulation with an alkaline binder partly converts the acid, so the blend contains a salt that the raw-material assay never saw. A chewable or a stick pack tastes sour at the surface where the acid sits. A clear liquid can hold only a limited amount of the sparingly soluble acid before it clouds, while the amide dissolves freely. None of this makes the acid a poor ingredient; it makes it a different one. A tablet with a buffered matrix, a capsule, or a deliberately acidic powder can carry it without difficulty, and the free acid is the form most buyers mean when the brief says niacin. ## The flush, as a fact about the ingredient Immediate-release nicotinic acid produces a flush in many people: warmth, redness and a tingling sensation, usually starting within half an hour and fading over the following hour. It is dose-related and person-dependent, and it is a vascular response rather than an allergic reaction. Niacinamide does not produce it at supplement doses, because the response depends on the free acid. The flush is not a defect in the lot and it is not a purity signal. It is why the two forms are separate label ingredients and separate purchasing decisions: a brand that cannot explain a flush to its customers is usually better served by the amide. Extended-release designs change the profile, and a change of release mechanism is a formulation project, not a grade swap. This site makes no health claim for either form. The flush is described here as a sensory and formulation fact, which is the only way it belongs in a technical document. ## What the label has to say The EU permitted-forms list carries nicotinic acid and nicotinamide as separate entries, so the ingredient declaration has to name the one in the product. The nutrient figure is declared in niacin equivalents, and both forms count one milligram as one milligram NE, which is why the number alone cannot tell a reader which form was used. In the US, the Supplement Facts source line does the same job: “Niacin (as nicotinic acid)” or “Niacin (as niacinamide)”. The percentage of the 16 mg NE Daily Value is calculated the same way for both. In the UK, the GB register applies in the same manner as the EU list, with the retained forms and the UK reference value. Whether to add a flush statement is a brand decision in the EU and the US as of this review; neither market requires one on a niacin supplement label. If a brand adds one, it belongs in the sensory language of the label, not in the claim text. The market detail is set out on the compliance page. ## Choosing between them When the acid fits and when the amide fits | Situation | Better fit | Reason | Tablet or capsule, buffered matrix, label says niacin | Nicotinic acid | Compresses well; the acidity is absorbed by the excipients | Clear drink, stick pack or sachet at neutral pH | Niacinamide | Freely soluble, close to neutral, no sour note | Effervescent system | Niacinamide | The acid would consume the carbonate | Chewable or gummy | Niacinamide | No local acidity and no sour taste | Brand wants the niacin name without a flush | Neither as sold | A different substance or a different release design is required The choice is usually made by the dosage form and the label, not by the assay. Where both are technically possible, the tie-breaker is the customer message: the acid is the form the word niacin brings to mind, and the amide is the form that avoids the flush conversation. ## What changes when you switch The specification changes first: the assay moves from titration to HPLC, and with it the impurity panel and the identity lines. The matrix changes next: pH, taste, solubility and the reaction with carbonate all move, and a blend that was stable with the amide may need revalidation with the acid. The label changes at the same time — ingredient name, source line, and any flush statement — while the milligram figure and the percentage of the NRV or Daily Value stay where they were. The commercial paperwork follows. A new specification, a new certificate and, where the market lists forms, a new label review. A switch planned late in a launch is a labelling event as much as a formulation one, and it is cheaper to decide the form before the artwork than after it. The two forms are compared in more detail on the niacin grade page, with the catalog limits on the niacin product page and the parallel material on the niacinamide product page. ### 01 What the COA for selenium yeast actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/selenium-yeast/coa/ Reviewed: 2026-11-19 The certificate for a selenium yeast lot reports total selenium by ICP-MS, protein, moisture, particle size, the heavy-metal panel and microbiology. Each row should show the test, the method, the release limit and the result for that lot. The catalog range is the gate; the batch COA is the record for the drum in front of you. A selenium figure on its own does not show how much of the element is organic. In one lineA selenium figure is a total; the certificate has to tie that total to the yeast matrix, the method and the lot. ## The certificate as a test report A certificate is useful when it can be audited line by line. For each parameter the reader needs three things: what was measured, which method produced the number, and which limit the lot was released against. The tables below show the catalog specification for selenium yeast. The certificate for a particular lot repeats the same lines with that lot's results. Composition and physical limits · selenium yeast | Parameter | Method | Release limit | Appearance | Visual | Yellow to light brown powder | Selenium (Se) | ICP-MS | 1,800–2,200 mg/kg | Protein | Nitrogen determination; factor stated | ≥40.0% | Moisture | Gravimetric | ≤6.0% | Particle size | Sieve analysis | ≥95% through 80 mesh Contaminant and microbiological limits | Parameter | Method | Release limit | Lead, arsenic, cadmium, mercury | ICP-MS | Pb ≤2 · As ≤1 · Cd ≤1 · Hg ≤0.1 mg/kg | Aerobic plate count | Plate count | ≤30,000 cfu/g | Yeast and mould | Plate count | ≤100 cfu/g | E. coli | Absence test | Absent | Salmonella | Absence test | Absent ## What the selenium and protein figures measure Selenium is reported as elemental selenium, not as selenomethionine and not as yeast. ICP-MS measures the element after digestion, so the result is a total. It does not say which species supplied that total, and it cannot separate selenium incorporated during fermentation from selenium added afterwards. The measurement is sensitive to technique. Selenium has several isotopes, and the argon plasma produces polyatomic interferences; a method note should name the isotope, the collision or reaction gas, the internal standard and the limit of quantification. A result without a limit of quantification is a number without an edge. Protein is usually calculated from Kjeldahl nitrogen multiplied by 6.25, and the factor belongs on the certificate. The figure describes the yeast matrix; it is not a purity percentage and it does not measure selenium. Moisture is a separate gravimetric result, and the certificate should say whether it is loss on drying or a moisture method, because the two are not always interchangeable. The concentration is easier to read in familiar units. A specification of 1,800–2,200 mg/kg is 0.18–0.22% selenium, or 1.8–2.2 mg per gram of powder. ## Release limit versus batch result The release limit is the acceptance boundary; the batch result is what the laboratory measured. Both belong on the page, in separate columns, with the method beside them. A result column filled with the specification range is not a result; it is a copy of the gate. This distinction matters at the edges. A selenium result near the lower limit passes and leaves almost no room for the next lot to drift lower. A moisture result just under 6.0% passes and still describes a powder that may pick up water in an open pack. “Passes specification” is a conclusion; the reader should reach it from the figures. The catalog specification on this page is not a batch record. The batch COA confirms a particular lot at the time of order, and the lot number on the certificate should match the lot number on the pack and on the retained sample. ## What moves between batches Selenium moves with the fermentation and the selenium feed. In the EU-listed process, the yeast takes up selenite and incorporates it into organic species; the total in the dried powder depends on how much selenium was available, how much was taken up, and how the culture was dried. A 1,800–2,200 mg/kg range is wide enough to absorb normal variation without turning every lot into a new grade. Protein and moisture move with the growth and drying steps. A hotter or longer dry lowers moisture and can darken the colour; a poor dry leaves water that later shows up as caking. Microbiology moves with the hygiene of the fermentation, the drying train and the pack. Colour, flow and odour are less quantitative and often more revealing than a single assay, but they are not a substitute for the release tests. A trend across lots says more than one result near an edge: selenium drifting low, protein falling, or the aerobic count climbing. Ask for the trend, not only the current certificate. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a species claim the supplier's certificate does not prove, or a disputed result. The useful panel is not a full repeat: total selenium by ICP-MS, a speciation run by HPLC-ICP-MS, protein, moisture and the micro panel on one sample answer more than a second copy of the routine certificate. Ask the laboratory to report its limit of quantification for each test and its extraction efficiency for the speciation run. A “not detected” line without a limit is not evidence about the sample; it is evidence about the method's sensitivity. For speciation, the mass balance matters: the species results should add up to a credible share of the total selenium. An outside laboratory is also the sensible referee when a result is contested. Give the referee the retained sample, the supplier's certificate and the specification, and ask for the tests that separate the organic from the inorganic share. Chain of custody matters: the sample tested should be the sample retained. ## What to compare between suppliers Put six lines side by side: selenium result and method; protein result and conversion factor; moisture method; speciation report, including selenomethionine and inorganic shares; contaminant and micro results; lot traceability from certificate to pack. Two quotations that match on selenium but diverge on the other five are not describing the same powder. For an EU-bound lot, the species window is part of the specification, not an optional extra. The Annex II entry describes selenium-enriched yeast with a selenomethionine share of 60–85% of the extracted selenium, other organic selenium compounds at no more than 10%, and inorganic selenium normally no more than 1%. A certificate that reports only total selenium leaves that window untested. The catalog specification sits on the selenium yeast product page. The grade question is on the grade page; the tests that separate organic from inorganic selenium are on the identity page; the ICP-MS method is described in the ICP-MS note; the release workflow is on the quality page. ### 02 1,000 or 2,000 ppm: choosing a selenium yeast grade URL: https://nutrition.rainwoodbio.com/products/minerals/selenium-yeast/grades/ Reviewed: 2026-11-19 Selenium yeast is sold by total selenium concentration, usually 1,000 or 2,000 mg/kg, on a yeast matrix that also carries protein. The grade changes the mass needed per dose, the fill weight, the blend uniformity and what the label has to say. The higher figure is not automatically the better choice. In one lineThe grade is a concentration on a yeast matrix, so switching it changes the mass, the blend and the label at the same time. ## Why the grade is not the assay Three variables hide behind one grade name: the selenium concentration, the yeast matrix, and the physical presentation. The concentration is a total, not a species assay. A 1,000 mg/kg grade and a 2,000 mg/kg grade can both be selenium yeast, made the same way, with the same organic species profile; the difference is how much selenium the dried powder carries. That matters because the number on the quotation is not a purity statement. It says how many milligrams of selenium sit in a kilogram of powder, not how much selenomethionine, how much protein, or how much of the selenium is inorganic. Those are separate lines on the specification. ## The grades side by side Selenium yeast grades · powder mass at two daily selenium amounts | Grade | Selenium | Powder for 55 µg | Powder for 200 µg | Fits | Watch | 1,000 mg/kg | 0.10% | 55 mg | 200 mg | Larger capsule, stick, tablet | Twice the mass and protein load | 2,000 mg/kg | 0.20% | 27.5 mg | 100 mg | Small capsule, tight fill | Small mass; blend uniformity | Diluted grade | Below 1,000 mg/kg on a carrier | Depends on the dilution | Depends on the dilution | Dry blends, low-dose products | Carrier must be declared | Granulated 2,000 mg/kg | 0.20% | 27.5 mg | 100 mg | Tablets, sachets | Granulation aids and flow ## What changes in the drum The yeast matrix is not an inert carrier. It carries protein, cell-wall material and water, and the specification sets protein at ≥40.0% and moisture at ≤6.0%. A 2,000 mg/kg grade delivers the same selenium in half the mass of a 1,000 mg/kg grade, so the protein and the matrix load per dose also halve. That can matter in a capsule with a tight fill weight and in a stick pack where the powder mass is fixed. Particle size is specified as ≥95% through 80 mesh. Granulation changes flow and density without changing the selenium chemistry; a granulated grade can run on a press that a fine powder would not, and a finer powder can disperse more evenly in a dry blend. The certificate should name the presentation, not only the concentration. ## What changes in the finished product For capsules, the fill weight decides. At 200 µg of selenium, a 2,000 mg/kg grade needs 100 mg of powder; a 1,000 mg/kg grade needs 200 mg. Both can fit a capsule, but the smaller mass leaves more room for other ingredients and the larger mass may rule out a small capsule size. At 55 µg, the masses are 27.5 mg and 55 mg; the 27.5 mg figure is small enough that blend uniformity becomes the real problem, and a dilution or a larger capsule may be the practical answer. Tablets add flow, density and compression. A granulated grade may help a blend that runs poorly; a finer grade may need a different lubricant or a larger die. Stick packs and drink mixes care about dispersion and taste more than the last decimal of the assay; the yeast matrix has its own flavour, and a higher grade puts less of it in the stick. None of these choices is a health claim; they are formulation consequences. ## What changes on the label The label declares elemental selenium, and the ingredient list names the source. In the EU, the source is written as selenium-enriched yeast; in the US, the Supplement Facts panel can say “Selenium (from selenium yeast)” and the ingredient list names the yeast. A grade change does not change the source name, but it can change the mass of the dosage unit and the % NRV or % Daily Value calculation. If the grade is a dilution on a carrier, the carrier is a second ingredient and belongs in the list. If the powder is blended with another selenium source, both sources belong in the list. A label that names only the yeast while the drum contains selenite is a labelling defect before it is a quality defect. The EU reference intake for selenium is 55 µg/day and the US Daily Value is 55 µg/day. A 200 µg dose is well above both, and the EU upper intake level for adults was revised to 255 µg/day in 2023; the US upper level is 400 µg/day. The label arithmetic and the destination ceiling have to be checked before the grade is fixed. ## What to put in the specification - “Selenium-enriched yeast, Se 1,800–2,200 mg/kg by ICP-MS; nominal 2,000 mg/kg.” - “Protein ≥40.0% (nitrogen × 6.25; factor stated); moisture ≤6.0%.” - “Particle size ≥95% through 80 mesh; granulated on request.” - “Speciation: selenomethionine share and inorganic selenium cap stated in the specification.” - “If diluted, name the carrier and its share; if blended, name every selenium source.” A line that reads only “selenium yeast 2,000 ppm” leaves the species, the matrix and the presentation open. The grade table is useful only if the certificate repeats the same definitions; otherwise the buyer is comparing a name, not a material. The parameters behind these figures are on the COA page. The species question is on the identity page; the source comparison is on the organic versus inorganic page; the regulatory limits are on the compliance page; the full specification is on the selenium yeast hub. ### 03 Selenium yeast is stable dry; moisture and the matrix decide the rest URL: https://nutrition.rainwoodbio.com/products/minerals/selenium-yeast/stability/ Reviewed: 2026-11-19 Selenium yeast is a dried yeast powder. Sealed and kept dry, it holds its selenium and protein for the shelf life set by the stability file. Moisture is the main risk: it causes caking, browning and microbial growth, and the yeast matrix decides how quickly the powder takes water up. Heat, light and an open pack accelerate the change. In one lineDry and sealed, the powder is stable; moisture and the yeast matrix decide the rest. ## Why the dry state matters The selenium in the powder is largely covalently bound in organic species, and that bond is not volatile at normal storage temperatures. A sealed pack at low moisture therefore has little chemical reason to lose selenium. The release limit for moisture is ≤6.0%, and the pack is the barrier that keeps the powder near that figure. Dry does not mean sterile. The microbiological specification allows an aerobic plate count of up to 30,000 cfu/g and a yeast and mould count of up to 100 cfu/g, with E. coli and Salmonella absent. Those are release limits for a dried food ingredient, not a promise that the powder can be left open in a humid room. ## Dispersion is not a solution The powder disperses in water; it does not form a clear solution. The yeast cells and the protein hydrate, swell and settle, and the dispersion is opaque. That is a physical difference from a crystalline salt, and it changes how a wet process has to be run: agitation keeps the particles suspended, and the water activity of the finished mix, not the clarity of the dispersion, decides the microbial risk. In a wet blend, the selenium species can leach into the water phase, and the protein can foam. A liquid or gel format needs its own stability work; the dry-powder shelf life does not transfer to it. ## What moves the powder Storage and formula factors · selenium yeast | Factor | Effect | Control | Moisture | Caking, browning, microbial growth | ≤6.0% release; sealed liner; desiccant on request | Heat | Darkening; oxidation of free species | Moderate drying; cool storage | Oxygen and light | Colour drift, off-odour | Closed pack; opaque liner | pH in wet mixes | Protein solubility and species drift | Keep the mix near neutral; test the formula | Compression | Tablet hardness; local moisture | Granulation and lubricant choice ## A stability protocol A stability protocol is a set of measurements, not a promise. A standard design holds the sealed pack at 25 °C/60% RH for long-term data and at 30 °C/65% RH and 40 °C/75% RH for accelerated data, with tests at 0, 3, 6, 12, 18 and 24 months. The parameters are total selenium, protein, moisture, appearance, the micro panel and, at the start and the end, a speciation check. Test the pack that will be sold, not only the bulk powder. A 1 kg foil pouch and a 25 kg drum have different headspace, different liner area and different opening histories. Record the lot, the pack, the storage condition and the test method with each point; a shelf life without that record is an assertion. ## What the formula does to it In capsules and tablets, the excipients are the water source. A hygroscopic filler or a wet granulation can raise the local moisture above the powder's release limit, and the tablet press adds heat and pressure. Choose excipients with low water activity, control the granulation end-point, and test the finished unit for moisture and selenium at release and at the end of shelf life. In sticks and drink mixes, the stick film is the barrier, and the sugar or maltodextrin in the blend can pick up water. In gummies and chews, the water activity of the matrix is the deciding variable; the yeast powder is a minor ingredient, but the protein and the colour can change the finished product. The overage is a formulation decision; the stability data should support the label at the end of the shelf life, not only at release. ## Setting the shelf life A 24-month shelf life in the sealed pack is common for a dried yeast powder, but the date has to come from the stability file for the actual pack and the actual specification. The label should state the storage condition the date assumes: dry, cool, out of direct light, pack closed. An opened pack is a different product. Reseal it, keep it dry, and use it within the working period the supplier states. If the powder is caked, discoloured or smells different, the certificate for the lot does not tell you that the pack is still good; the pack does. The COA page shows the release tests that the stability work repeats; the MOQ page covers the packs and the storage label; the microbiology method note explains the counts; the quality page describes the lot record; the product hub is selenium yeast. ### 04 Selenium yeast: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/selenium-yeast/moq/ Reviewed: 2026-11-19 Selenium yeast is supplied from 1 kg, drawn from a released lot and accompanied by that lot's certificate. The 1 kg foil pouch is the qualification pack; the 25 kg fiber drum is the production pack. Lead time is 1–7 days from confirmation of specification and order, and a quotation is only complete when grade, quantity, pack, destination and documents are settled. In one lineOne kilogram is a qualification unit drawn from a released lot, not a retail pack. ## Why the minimum is one kilogram One kilogram of a 2,000 mg/kg grade carries about 2 g of selenium. At a 200 µg daily dose that is 10,000 doses; at 55 µg it is more than 36,000. The same kilogram of a 1,000 mg/kg grade carries 1 g of selenium, or 5,000 doses at 200 µg. That is enough for a pilot encapsulation or tableting run, a short stability study and a reserve sample, which is what a first order is for. The minimum is a packing and documentation unit, not a volume break. A larger order is filled from the same released lot when the lot is large enough; when it is not, a new lot is raised and a new certificate is issued. The certificate always belongs to the lot that fills the drum. ## Packaging Standard packs · selenium yeast | Pack | Use | Notes | 1 kg foil pouch | Trial, sample, small batch | Sealed food-grade liner; product, grade and lot on the label | 25 kg fiber drum | Production | Lined drum, tamper-evident closure, lot label visible The liner is the surface that meets the powder, so a torn liner or an unsealed drum changes the storage condition regardless of the label. A humid destination can be handled by adding a desiccant to the packing specification at the order stage. Every pack should carry the product name, the selenium grade, the net mass, the lot and the storage condition. If those details cannot be matched to a certificate, traceability has already failed. Open and close both formats in the same dry area. The pouch is a working pack, not a retail pack, and should be resealed between weighings; the drum liner should be closed down rather than left open. ## Lead time The quoted window is 1–7 days measured from confirmation of specification and order. The clock begins when grade, quantity, packing and paperwork are settled, not at the first enquiry. A speciation report, an outside micro test or a granulation step adds its own time, shown separately on the quotation. Three things commonly move the date: a specification edited after confirmation, a document requested late in the process, and a destination rule that needs an additional test. Raising all three in the first exchange protects the date better than chasing it later. If there is a launch date, it belongs in the brief, not in a follow-up email. ## What the quotation needs A useful enquiry answers six questions: - Which selenium grade is wanted — 1,000 or 2,000 mg/kg — or which specification is being matched? - What is the first-order quantity, and what volume is expected across a year? - Which dosage form will carry the powder — capsule, tablet, stick pack, drink mix or other? - Which destination market, and which documents does it require? - Which tests must be on the certificate: protein, moisture, mesh, speciation, micro? - Is there a delivery or launch date that cannot move? A competitor's certificate can replace a written brief at the start, because it shows the tests and limits the buyer already uses. Send it and the reply will be a counter-specification: what can be met, what cannot, and what needs a trial. ## Samples A sample is taken from a released lot and travels with that lot's COA. Ask for the grade the trial will run — 80 mesh, granulated or diluted — not a different presentation, or the trial will answer a different question. A sample without a certificate is a demonstration, not a qualification. The quantity should follow the trial protocol: enough capsules or tablets for the run plus a reserve, and enough powder for a moisture and selenium check. Keep part of the sample as a reference so the trial result can later be compared with the production lot. ## Payment, claims and terms Payment terms, Incoterm and documentary requirements are confirmed in the order paperwork. Destination, quantity and whether the account is new all affect them, so no single website statement can cover every order. Claims are checked against the retained sample and the lot certificate. Report damage or a shortfall when the pack is opened, with photographs of the pack and its lot label, so the report can be tied to the lot record. The purchase order should carry grade, mesh, pack and documents; the specification is the annex against which the certificate is checked. The COA page sets out what the certificate contains; the grade page shows what a grade change does to the order; the logistics page covers movement and documents; the quality page describes the lot record. The product hub is selenium yeast. ### 05 Where selenium yeast is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/minerals/selenium-yeast/compliance/ Reviewed: 2026-11-19 Selenium-enriched yeast is a permitted selenium source for food supplements in the EU and the UK, and it is used as a dietary ingredient in the US, where the exact form needs a lawful basis. Permission is only the first check: the EU also sets a specification for the yeast, and each market has its own contaminant, labelling and claim rules. This page maps those checks as of this review; the current legal text in the destination market decides. In one linePermission, specification, contaminant ceiling, label and claim are five separate checks, and each market answers them differently. ## The five checks Selling selenium yeast into a market raises five questions. Is the form on the permitted list? Does it meet the market's yeast specification? Which contaminant ceiling applies to the finished supplement? Does the label name the source and declare selenium correctly? And is the statement an authorised claim, a structure/function statement, or not allowed at all? The answers do not travel together. A form accepted in one country can be unlisted in another, and a US structure/function statement is not thereby an authorised EU health claim. ## European Union In the EU, selenium-enriched yeast appears in Annex II to Directive 2002/46/EC, the permitted-substance list for food supplements. The listing is not a general permission for any selenium-containing yeast. The Annex II entry describes yeast produced by culture in the presence of sodium selenite, with not more than 2.5 mg Se/g in the dried form as marketed. The predominant organic species is selenomethionine, at 60–85% of the total extracted selenium; other organic compounds, including selenocysteine, are limited to 10%; inorganic selenium is normally limited to 1%. The catalog grade at 1,800–2,200 mg/kg sits below the 2.5 mg/g ceiling. A yeast grown with another selenium source, or a different species, is a different case: selenium-containing Yarrowia lipolytica biomass is a novel food under Implementing Regulation (EU) 2020/1993, not the Annex II ingredient. Labelling follows Regulation (EU) No 1169/2011: the ingredient list names selenium-enriched yeast, and the nutrition declaration gives the selenium amount. The EU reference intake is 55 µg/day; there is no EU-wide maximum for selenium in supplements, though some Member States set national limits. EFSA revised the adult upper intake level to 255 µg/day in 2023, a ceiling from all sources, not a formulation target. Annex II and the claim register change; read the consolidated text current on the day the label is approved. ## United States US law asks a different question first: is this exact form a lawful dietary ingredient? The route may be pre-DSHEA marketing, a GRAS conclusion covering the intended use, or a new dietary ingredient notification. The supplier should point to the route and the file; “selenium is an essential nutrient” is not, by itself, a basis for a particular source. On the panel, selenium is declared as the element; the source sits in the ingredient list. For adults and children four and older, the Daily Value is 55 µg, and the tolerable upper intake for adults is 400 µg/day. Lead has no federal maximum specific to supplements, so California's Proposition 65 and the daily dose may decide whether a warning is needed. Manufacturing falls under the dietary-supplement cGMP rule in 21 CFR 111. ## United Kingdom The UK retained the Annex II list at IP completion day, so selenium-enriched yeast remains permitted under the food supplements regulations for England and the devolved equivalents. The entry carries the same specification: yeast grown with sodium selenite, no more than 2.5 mg Se/g, and the same species window. The UK reference intake is 55 µg/day; contaminant and labelling rules are now UK law and should be checked in their current form. Northern Ireland follows EU food law under the Windsor Framework, so a lot for Belfast follows the EU column. ## The contaminant table Heavy-metal limits · EU food supplements, US and UK positions, and the catalog specification | Element | EU | US | UK | Catalog specification | Lead | 3.0 mg/kg | No federal maximum specific to supplements; Prop 65 may apply | Retained limit; check current UK text | ≤2 mg/kg | Arsenic | Not harmonised; Member State limits possible | Check federal and state law | Check current UK text | ≤1 mg/kg | Cadmium | 1.0 mg/kg | Check federal and state law | Check current UK text | ≤1 mg/kg | Mercury | 0.10 mg/kg | Check federal and state law | Check current UK text | ≤0.1 mg/kg The EU column is written for the supplement as sold, not for the raw material; the raw-material limit has to be derived from the daily dose and the ingredient's share of the formula. Arsenic has no harmonised EU number, so a Member State may set its own. This table is a map of where to look, not a legal opinion. The catalog specification is tighter than the EU ceiling for lead and equal to it for cadmium and mercury. That is a deliberate margin: 2 mg/kg lead in the raw material leaves room for the rest of the formula, but it does not replace the finished-product calculation. ## Claims and labelling The EU claim register under Regulation (EU) No 432/2012 contains selenium statements that may be used only with their attached conditions; they concern normal function, not disease. In the US, a structure/function statement is written and substantiated by the brand and must sit beside the DSHEA disclaimer. A disease claim is outside both frameworks. Nothing on this site is a claim for the ingredient. The label sentence belongs to the brand, and the evidence belongs in the brand's file. The source name must match the form on the certificate: selenium-enriched yeast is not a synonym for selenomethionine or sodium selenite. ## The document pack A complete lot file usually contains: - A lot COA covering selenium, protein, moisture, particle size, contaminants and microbiology. - A TDS and purchase specification naming the yeast, the selenium source and the grade. - A speciation report, including the selenomethionine share and the inorganic selenium result. - An SDS following the 16-section format. - Statements on allergens, GMO status, origin and the selenium source used in the fermentation. - The US dietary-ingredient basis, where the market requires it. Every document should carry the lot number or point to it. A generic TDS and a lot-specific COA are not a matched pair unless grade, source and pack agree. ## What to check before the first order Six questions to settle before the purchase order: - Is selenium-enriched yeast permitted where the product will be sold, and does the label use the same source name? - Does the lot meet the EU specification for selenium-enriched yeast, including the species window? - Are the contaminant figures below the destination ceiling at the actual daily dose? - Does the ingredient list disclose every selenium source, including any carrier or dilution? - Is the label statement inside the authorised wording, or a properly disclaimed structure/function statement? - Is the dietary-ingredient basis documented, and is the whole file tied to the lot? The identity page explains the species window, and the COA page shows the parameters the file has to support. The hub carries the catalog specification, and the EU, US and UK notes expand each market. ### 06 How we prove a selenium yeast lot is the organic form URL: https://nutrition.rainwoodbio.com/products/minerals/selenium-yeast/identity/ Reviewed: 2026-11-19 A selenium yeast lot is identified on four levels: it is a yeast, it carries the declared total selenium, that selenium is organic and held in the yeast matrix, and the lot meets the protein and contaminant limits. Total selenium by ICP-MS proves the second level only. The species and the matrix need separate tests, and the specification has to ask for them. In one lineTotal selenium proves the element is there; speciation and the protein-bound fraction prove it is selenium yeast. ## The four identity layers Identity is a stack, not a single assay. A certificate that stops at the first or second layer leaves the most expensive question open. The four identity layers · selenium yeast | Layer | Question | Test | What it does not prove | Yeast | Is the material a yeast? | Microscopy, protein, cell-wall markers; species check on request | That it contains selenium | Total selenium | How much selenium is present? | ICP-MS | Which species, or whether the selenium is organic | Species | Is the selenium organic, and which species? | HPLC-ICP-MS after extraction | That the species is bound in the yeast matrix | Lot release | Does the lot meet the specification? | Moisture, mesh, metals, micro, protein | That the next lot will match ## Total selenium by ICP-MS ICP-MS measures the element after digestion, so the result is total selenium. The method suits a 1,800–2,200 mg/kg specification: it is sensitive, covers the range without dilution trouble, and the contaminant panel can run on the same digest. The certificate should name the isotope, the collision or reaction gas, the internal standard and the limit of quantification. The result is only as good as the digestion. Yeast protein and cell walls are not always easy to dissolve, and an incomplete digest reads low. A recovery check or certified reference material belongs in the method record, and the number should state its basis. ## Selenium species, not just selenium Speciation separates organic from inorganic selenium. The sample is extracted, usually with an enzyme cocktail, and the extract is run by HPLC coupled to ICP-MS. The common species are selenomethionine, selenocysteine, selenomethylselenocysteine, selenite and selenate. The result is a profile, not a single number. Two quality checks make the profile readable. Extraction efficiency says how much of the total selenium reached the column; a low figure leaves part unidentified. Mass balance says whether the species results add up to a credible share of the total. A report without either figure is a partial answer. The EU specification gives the profile a window: selenomethionine at 60–85% of the extracted selenium, other organic compounds at no more than 10%, and inorganic selenium normally no more than 1%. The window is a regulatory definition, not a batch result; the lot's report has to sit inside it. ## Protein and the selenium-to-protein ratio The protein figure is part of the identity. A specification of ≥40.0% describes a yeast matrix with a substantial protein fraction; a powder with the same selenium and much less protein is a different material, or a diluted one. The method is usually Kjeldahl nitrogen × 6.25, and the factor belongs on the certificate. The selenium-to-protein ratio is a consistency check. At 2,000 mg/kg selenium and 40% protein, the powder carries about 5 mg of selenium per gram of protein. A lot with the same selenium and half the protein is not the same matrix; a lot with the same protein and half the selenium has been diluted, or the fermentation did not load the yeast. Protein binding is the next question. Selenomethionine can be incorporated into yeast proteins in place of methionine, or remain free in the powder. A speciation run that separates the water-soluble from the protein-bound fraction answers that; a total species figure does not. ## Why XRD cannot see a yeast matrix X-ray diffraction has almost no role in identifying selenium yeast. The material is dried yeast — protein, cell walls and salts, largely amorphous — so a diffractogram is a broad halo, not a phase pattern. Selenium sits at about 2,000 mg/kg, a fraction of a percent, dispersed as organic species; no crystalline selenium phase is expected there. XRD could detect a crystalline inorganic salt added in bulk, but it cannot show that the selenium is organic, which species carries it, or that the matrix is yeast. Those questions belong to ICP-MS, HPLC-ICP-MS speciation and protein. XRD answers a question this material does not pose. ## Adulteration: what to look for Selenium yeast faces five common substitutions, each with a fingerprint usually visible in the file before the drum is opened. Common substitutions and the tests that show them | Substitution | What it does | Fingerprint | Sodium selenite or selenate added | Raises total selenium without fermentation | Inorganic selenium high; selenomethionine share low; sodium or ash elevated | Low-selenium yeast blended up to a grade | Mixes a high-selenium and a low-selenium yeast | Selenium and protein ratio shifts; species profile may still look organic | Non-selenised yeast or a non-yeast carrier | Adds mass | Selenium low against protein; microscopy and protein may show a different matrix | Free selenomethionine added | Raises the species figure | Free selenomethionine high; protein-bound share low | A different yeast species | Changes the matrix and the regulatory case | Species check; TDS and strain name The first line matters most for EU-bound lots. Selenite is a permitted source, but it is not selenium-enriched yeast, and adding it changes the ingredient. The EU limit on inorganic selenium, normally 1%, catches it. The second is arithmetic: a 1,000 mg/kg grade can be made by blending a 500 mg/kg base with a 2,000 mg/kg powder. The blend is legitimate only if declared; the species profile alone will not show it. A sodium result is a useful screen for selenite, because sodium selenite carries sodium. It is not proof; the speciation result is the confirmation. Microscopy and a species check separate a different yeast from the expected one. ## What to write into the specification - “Selenium-enriched yeast, Se 1,800–2,200 mg/kg by ICP-MS; the yeast species named on the TDS.” - “Protein ≥40.0% (nitrogen × 6.25; factor stated); moisture ≤6.0%; ≥95% through 80 mesh.” - “Speciation by HPLC-ICP-MS: selenomethionine 60–85% of extracted selenium; other organic ≤10%; inorganic selenium ≤1%; extraction efficiency reported.” - “No added sodium selenite, selenate or free selenomethionine; if blended or diluted, every component declared.” - “Pb ≤2 · As ≤1 · Cd ≤1 · Hg ≤0.1 mg/kg; APC ≤30,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent.” These lines are limits, not batch results. The certificate repeats them with that lot's figures, and the specification is the reference. ## Five questions for the supplier - Which yeast is it, and which selenium source was used in the fermentation? - What is this lot's total selenium, by which method, and on what basis? - Is there a speciation report, with selenomethionine, other organic and inorganic figures? - How was the protein measured, and what conversion factor was used? - Is any selenite, selenate, free selenomethionine or carrier present, and is the lot traceable? Five direct answers amount to a specification; one selenium percentage does not. The COA page shows where each figure sits; the grade page explains the concentration choice; the compliance page covers the EU species window; the organic versus inorganic page sets out the three sources; the ICP-MS note explains the measurement. ### 02.1 Organic vs inorganic selenium: yeast, SeMet and selenite URL: https://nutrition.rainwoodbio.com/products/minerals/selenium-yeast/grades/organic-vs-inorganic/ Reviewed: 2026-11-19 Organic selenium means selenium covalently bound in carbon-containing species; inorganic selenium means selenite or selenate salts. Selenium yeast, L-selenomethionine and sodium selenite are three different ingredients with different selenium concentrations, species, regulatory entries and label names. They are not interchangeable on a specification, even when the selenium figure on the label is the same. In one lineOrganic is a chemical statement about the selenium species, not a farming claim, and the three sources are separate ingredients. ## Three sources, one element Three selenium sources · concentration, species and label name | Source | Selenium content | Dominant species | EU Annex II name | US ingredient list | Selenium yeast | 1,800–2,200 mg/kg (0.18–0.22%) | Selenomethionine and other organic species in a yeast matrix | Selenium-enriched yeast | Selenium yeast | L-Selenomethionine | About 40.2% | One defined amino acid | L-selenomethionine | L-selenomethionine | Sodium selenite | About 45.6% anhydrous; about 30.0% as the pentahydrate | Se(IV) inorganic salt | Sodium selenite | Sodium selenite ## What “organic” means here The word organic here is chemistry, not agriculture. It means the selenium is part of a molecule with a carbon–selenium bond, as in selenomethionine, where selenium replaces the sulfur of methionine. Inorganic selenium is a salt: selenite is Se(IV), selenate is Se(VI). The distinction is analytical, and it is the reason a total selenium assay cannot answer the question. Selenium yeast is a mixture. In the EU-listed process, the yeast is cultured with sodium selenite and incorporates selenium into selenomethionine, selenocysteine and other species, and the dried powder also carries protein and cell-wall material. The EU specification for selenium-enriched yeast sets the mixture's window: selenomethionine at 60–85% of the extracted selenium, other organic species at no more than 10%, inorganic selenium normally no more than 1%. L-Selenomethionine is a single molecule, and sodium selenite is a single salt; neither has that matrix or that window. “Organic” on a label can also mean certified organic production, which is a different claim under a different regulation. A selenium yeast can be chemically organic and not certified organic; the two statements should not be merged. ## Three different label entries In the EU, the three sources are separate entries in Annex II to Directive 2002/46/EC. The ingredient list has to use the entry that matches the drum: selenium-enriched yeast, L-selenomethionine or sodium selenite. In the US, the Supplement Facts panel declares selenium, and the ingredient list names the source; “selenium yeast” and “L-selenomethionine” are not interchangeable descriptions. The label also carries the amount. Selenium yeast is a powder with a selenium concentration, so the label dose is a mass of powder; L-selenomethionine and sodium selenite are often supplied as diluted triturations, and the dilution belongs in the ingredient list. A product that switches source without changing the label is mislabelled even if the selenium figure stays the same. ## When each source fits Choose on the label, the dose and the analytical file, not on a general hierarchy. Selenium yeast suits a product that wants a fermented whole-cell matrix and a source name that says so; the specification then has to carry the species window and the protein figure. L-Selenomethionine suits a product that wants one defined molecule and a dose that can be calculated from a single species. Sodium selenite suits a product that wants a simple inorganic salt and is permitted to name it. The daily dose is the second filter. The EU upper intake level for adults was revised to 255 µg/day in 2023, and the US upper level is 400 µg/day. A source change does not create room under either ceiling; the total selenium from all ingredients is what counts. The third filter is the market's permitted list, which is covered on the compliance page. ## What changes when you switch Switching source changes more than the ingredient name. The selenium concentration changes the mass per dose, the species profile changes the analytical file, and the label entry changes the regulatory route. A formula built on 2,000 mg/kg yeast and switched to selenomethionine at 40.2% needs a new dose calculation, a new blend study and a new label; the selenium figure alone does not carry over. Switching within the yeast category is smaller but not trivial: a 1,000 mg/kg grade and a 2,000 mg/kg grade are the same source at different concentrations, and the mass, the fill weight and the blend uniformity change. That comparison is on the grade page. ## What to write into the specification - “Selenium source: selenium-enriched yeast; species and selenium source named on the TDS.” - “Se 1,800–2,200 mg/kg by ICP-MS; protein ≥40.0%; moisture ≤6.0%.” - “Speciation: selenomethionine 60–85% of extracted selenium; other organic ≤10%; inorganic ≤1%.” - “No added selenite, selenate or free selenomethionine; any carrier declared.” - “If the source is L-selenomethionine or sodium selenite, the assay is on the pure substance and the dilution is declared.” These lines describe three different materials. A purchase order that names only “selenium 2,000 ppm” has not chosen one of them. The identity page explains how the species are tested; the product hub carries the catalog specification; the EU regulatory note covers the Annex II entries; the Annex II glossary entry explains the list. ### 01 What the COA for L-selenomethionine actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/selenomethionine/coa/ Reviewed: 2026-11-19 For an L-selenomethionine lot the certificate reports appearance, identification by infrared, assay by HPLC on the as-is basis, selenium by ICP-MS, specific rotation, loss on drying, particle size, the heavy-metal panel and microbiology. Each line needs its method, its release limit, and the lot's own result beside that limit. The figures here are the catalog specification; the batch COA confirms a particular drum. In one lineThe selenium figure shows how much of the element is there; the rotation shows which enantiomer carries it, and a certificate needs both. ## The certificate as a parameter list A certificate is useful when it can be audited line by line. Three things have to sit beside every parameter: what was measured, which method produced the number, and which limit the lot was released against. Without all three, the line is a statement of intent rather than a result. Identity, selenium and physical limits · L-selenomethionine | Parameter | Method | Release limit | Appearance | Visual | White to off-white crystalline powder | Identification | IR against a reference spectrum | Conforms | Assay (as-is basis) | HPLC | 97.0–103.0% | Selenium (Se) | ICP-MS | 39.0–41.0% | Specific rotation | Polarimetry | +17.0° to +19.5° | Loss on drying | Gravimetric | ≤0.5% | Particle size | Sieve analysis | ≥95% through 40 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent ## What the two percentages measure The assay counts the molecule; the selenium figure counts one atom inside it. They are produced by different instruments and answer different questions, and that is why the pair is more informative than either line alone. The arithmetic connects them. L-selenomethionine has a molar mass of about 196.1 g/mol and carries one selenium atom at 78.97 g/mol, so the element is 40.3% of the molecule by mass at full purity. Multiply the assay by that fraction and you should land inside the selenium window: 97.0% assay implies about 39.1% selenium, and 41.0% selenium implies about 101.8% assay. A lot reported at 103.0% assay and 41.0% selenium is not describing one pure substance on both lines; either the two figures sit on different bases, or they were measured on different samples. The assay is reported as-is, which is why loss on drying belongs beside it. With a limit of ≤0.5% the gap between the as-is and dried bases is at most half a percentage point. A certificate that reports an as-is assay and no moisture figure has left the reader unable to convert. Neither figure can see chirality. The D enantiomer carries the same 40.3% selenium and the same retention time on an achiral column, so a half-racemised lot still passes both lines. That is the gap the specific rotation fills. ## Release limit, result and basis The release limit is the boundary for the lot; the batch result is what the laboratory measured. The two belong side by side on the page. A result column that repeats the specification range is not a result; it is a copy of the gate. Lines that must be lot-specific on the certificate | Line | What a copied limit looks like | What a real result looks like | Assay | The window printed as the result | One figure, with the method and the basis named | Selenium | Left blank, or “conforms” | A figure from ICP-MS, with the isotope and the digestion named | Specific rotation | “+17.0° to +19.5°” in the result cell | A value with temperature, concentration, solvent and wavelength | Loss on drying | Absent | A figure, because it converts the assay to the dried basis | Microbiology | “Absent” with no method | Counts and absence tests, with the method named | Retest date | Absent | A date that matches the label on the pack The rotation line deserves a second look. A value of +18.2° without its conditions cannot be compared with another laboratory's figure, and a value written as a range is a specification, not a measurement. Rotation depends on concentration, solvent, temperature and path length. ## What moves between batches Assay and selenium move together, because both respond to purity and to dilution. If the selenium result falls to 39.2% and the assay stays at 99%, the likely cause is a diluent that carries no selenium — the sulfur analogue methionine is the closest and most obvious one, since it is a white crystalline solid of similar solubility. The selenium figure is the screen for that route; the assay alone will not find it if the method does not separate the two amino acids. Rotation moves independently. A low rotation with a normal selenium figure points to racemisation rather than to dilution, and racemisation is a process problem: a hot alkaline step, a long hold at high pH or an aggressive hydrolysis will pull the optical purity down while every elemental figure stays in range. Loss on drying follows the drying step and the pack, not the assay. Particle size and flow move with milling and sieving, and colour moves with the drying history rather than with the assay. A trend across consecutive lots — selenium drifting down, rotation drifting toward the bottom of the window — says more than a single result near an edge. ## When an outside test earns its place Order an independent test for a new source, a first shipment into a regulated market, a rotation result near the lower limit, a speciation claim that the certificate does not support, or a disputed result. What the outside panel adds is the tests that separate forms: chiral HPLC or chiral derivatisation for the enantiomeric ratio, ICP-MS for selenium and for the heavy-metal panel, IR for the solid, and polarimetry repeated under declared conditions. Ask the laboratory to report its limit of quantification for the chiral method. A line that reads “D form not detected” without a limit says something about the method's sensitivity, not about the sample. Give the referee the retained sample and the specification, and ask for the tests that distinguish the L form from the alternatives. ## What to compare between suppliers Put six lines side by side: the declared form and whether the lot is synthetic or fermentation-derived; the assay result, its basis and its method; the selenium result and the ICP-MS conditions; the rotation value with its measurement conditions; loss on drying; and the chiral purity, if a figure is offered at all. Two quotations that agree on selenium and diverge on the other five are not describing the same powder. The second layer is traceability. The lot code should be identical on the certificate, the pack and the retained sample, and the certificate should say who manufactured the lot. A certificate can be entirely correct and still describe a drum other than the one that arrives. The specification sits on the L-selenomethionine product page. The form question is set out on the grade page; the evidence that separates the L form from its mirror image is on the identity page. The two instruments behind the certificate are described in the HPLC and ICP-MS method notes. ### 02 L-selenomethionine, selenium yeast or selenite: choosing a selenium source URL: https://nutrition.rainwoodbio.com/products/minerals/selenomethionine/grades/ Reviewed: 2026-11-19 Three selenium sources are sold into supplements: L-selenomethionine at 39.0–41.0% selenium, selenium-enriched yeast at roughly 1,800–2,200 mg/kg, and sodium selenite at about 46% as the anhydrous salt. They differ by about two hundredfold in selenium concentration, they carry the element in different chemical surroundings, and they appear under three different names in law. The dosage form and the label decide which one fits before the assay does. In one lineSelenium yeast at about 0.2%, L-selenomethionine at 40% and sodium selenite at 45%: the concentration decides which one your dosing line can actually weigh. ## Why the source is the grade L-selenomethionine is one molecule with one specification, so there is no purity ladder to choose from. What a buyer chooses is the source of the element, and then the presentation of the chosen source: crystal at 40 mesh, milled to 80 mesh, or diluted onto a carrier. That is why the comparison on this page is a comparison of sources rather than of grades. The three sources are not interchangeable in a formula, in a label or in a laboratory. A certificate for one does not describe the others, an assay for one does not transfer to the others, and a dose written for one is wrong for the other two by one to two orders of magnitude. ## The three sources side by side Selenium sources · concentration, species and legal name | Source | Selenium | Chemical setting | Label ingredient | L-selenomethionine | 39.0–41.0% | Organic selenium bound in an amino acid, one atom per molecule | L-selenomethionine | Selenium-enriched yeast | 1,800–2,200 mg/kg | Organic selenium incorporated into yeast protein, mostly as selenomethionine and selenocysteine, with a residual inorganic fraction | Selenium-enriched yeast, with the species named | Sodium selenite | about 45.6% anhydrous, about 30.0% as the pentahydrate | Inorganic selenite, Se(IV), as a simple salt | Sodium selenite Concentration is the first practical difference. One gram of L-selenomethionine carries about 0.4 g of selenium; one gram of yeast carries about 0.002 g; one gram of anhydrous selenite carries about 0.46 g. Put the other way round, the yeast needs roughly two hundred times the mass of L-selenomethionine to deliver the same selenium. The chemical setting is the second difference, and it is the one that drives the paperwork. In L-selenomethionine the selenium sits inside a defined amino acid, so a single assay, a single selenium figure and a rotation describe the material completely. In yeast the selenium is distributed across protein-bound species plus a residual inorganic fraction, so the total selenium figure is only the start; the speciation is what describes the ingredient. ## What each source does in the plant L-selenomethionine arrives as a white to off-white crystalline powder that dissolves in water to a clear, colourless solution, with a standard presentation of ≥95% through 40 mesh. Milling to 80 mesh is available and helps when the material has to be distributed through a small blend. Because so little is used per batch, dust control and segregation matter at the weighing station. Selenium yeast is a yellow to light brown powder with a protein content above 40% and a moisture limit of ≤6.0%. It is dispersible rather than soluble; the yeast matrix does not give a clear solution. It also brings yeast protein and a higher microbial load into the formula, which the file has to state. Sodium selenite is a white crystalline solid, freely soluble, and the smallest mass per dose of the three. It is also the form with the least forgiving handling profile: the concentrated salt is toxic by ingestion, so the weighing step needs containment, which is why most production uses a pre-diluted grade rather than the pure salt. Dilution is the common answer for all three. At the doses selenium is used at, no factory weighs the pure material into a capsule blend; a 1% or 0.1% trituration on a declared carrier is what reaches the blender. On the L-selenomethionine specification, dilution is offered on request, and the carrier has to be named on the certificate because it changes the selenium figure and the label. ## What the dose does to the fill weight Mass required for 55 µg of selenium | Source | Mass for 55 µg Se | Share of a 300 mg fill | L-selenomethionine | about 0.14 mg | about 0.05% | Selenium-enriched yeast | about 27.5 mg | about 9% | Sodium selenite, anhydrous | about 0.12 mg | about 0.04% The arithmetic explains most of the formulation behaviour. At 0.05% of the fill, L-selenomethionine cannot be weighed per batch and cannot be distributed evenly by simple blending; it needs a premix step, and the premix needs its own uniformity check. The yeast, at about 9% of the fill, can be weighed directly, which is one reason it suits small production runs and simple blends. Move the other way and the constraint changes. A high-selenium capsule with a small fill weight has no room for 27.5 mg of yeast but plenty of room for 0.14 mg of L-selenomethionine; a powder stick with a 5 g fill can carry either. The European labelling reference value for selenium is 55 µg per day, so the dose per portion is decided by the label claim, not by the source. ## What the specification has to name - “L-selenomethionine, CAS 3211-76-5, C5H11NO2Se; assay 97.0–103.0% as-is by HPLC; selenium 39.0–41.0% by ICP-MS.” - “Specific rotation +17.0° to +19.5°, with temperature, concentration and solvent stated.” - “Loss on drying ≤0.5%; ≥95% through 40 mesh; heavy metals Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg.” - For yeast: “Selenium 1,800–2,200 mg/kg; protein ≥40%; speciation by HPLC-ICP-MS with the selenomethionine fraction reported.” - For any dilution: “Carrier named; selenium figure stated on the diluted material, not only on the concentrate.” A specification that names only “selenium 40%” has not named a material. The selenium figure alone can be met by the wrong molecule, the wrong enantiomer or a blend of two sources, and the rest of the specification is what closes those routes. ## When not to switch source Switching source is a revalidation, not a substitution. The fill weight changes, the label ingredient changes, the assay method changes, the stability profile changes and the microbial and allergen declarations change. A formula validated on L-selenomethionine cannot be moved to yeast without re-checking dose uniformity, because the mass per capsule rises by about two hundredfold. There are also good reasons to stay where you are. A label that already names one source, a stability study built around one matrix, and a market file that lists one form are all reasons to keep the source and change something else. The comparison of the two organic sources has its own page: L-selenomethionine versus selenium yeast. The legal name for each source is listed in the Annex II glossary entry, and the market-by-market rules are on the compliance page. The certificate lines are set out on the COA page, the yeast specification is on the selenium yeast page, and the 55 µg reference value is explained in the NRV note. ### 03 Selenomethionine is stable dry; moisture and the matrix decide the rest URL: https://nutrition.rainwoodbio.com/products/minerals/selenomethionine/stability/ Reviewed: 2026-11-19 The crystalline powder is the stable part of the product. L-selenomethionine is sold at ≤0.5% loss on drying, and a sealed foil pouch keeps it there. What shortens a shelf life is what happens after the pouch is opened: moisture pick-up, a hot alkaline step, an oxidant in the plant, or a matrix that reacts with the amino group. In one lineSealed and dry, the powder is the stable part; moisture pick-up and the finished matrix decide what the label can claim as shelf life. ## The dry powder The specification caps loss on drying at ≤0.5%, which is a tight window for a crystalline solid and a useful one. It means the as-is assay and the dried-basis assay differ by less than half a percentage point. It also means any moisture the lot picks up in handling is visible as a drift against that limit rather than hidden inside a wide moisture range. Caking is the first physical symptom of moisture pick-up. A 40 mesh crystal flows well; the same powder after a humid week in an open drum can bridge in the hopper, and a milled 80 mesh powder cakes sooner because the surface area is larger. The assay may still pass, which is the reason to keep the pack closed until the weighing step. Particle size and moisture move together in practice. A finer powder holds more air, picks up moisture faster and segregates more in a blend. The loss on drying figure is the number to trend, not a single result. ## Solutions and liquid contact L-selenomethionine dissolves in water to a clear, colourless solution, and at the dose the material is used at, the solution is very dilute. A 1 mg/mL stock delivers a 55 µg selenium dose in about 0.14 mL, a volume a softgel can carry but a dry stick pack cannot. Most liquid applications therefore use a diluted premix rather than the concentrate. Three things happen in water. An unpreserved solution at neutral pH is a growth medium, so microbial control is a formulation decision. The selenide centre oxidises, and more readily than the sulfur analogue in methionine: the selenoxide forms under peroxide, hypochlorite or ozone, and the change shows as a shift in the chromatogram. And the chiral centre is labile under heat and alkali, the same reaction that matters dry but runs faster in solution. Adsorption is real at these concentrations. A dilute solution loses analyte to filters, tubing and container walls, and an analytical result can fall for that reason alone; rinse the filter and keep the container material constant. ## What actually drives the change Stress factors and what they affect | Factor | Effect | Where it appears | Moisture and water activity | Caking, flow loss, LOD drift | Open packs, humid plants, gummies | Heat | Faster racemisation, browning with sugars | Drying, cooking, tabletting | Alkaline pH | Loss of optical purity | Neutralisation steps, alkaline premixes | Oxidants | Selenoxide formation | Peroxide or hypochlorite residues, ozone | Reducing sugars and heat | Maillard browning with the amino group | Gummies, syrups, baked bars pH is the factor most often missed. The molecule is stable in mildly acidic conditions; the chiral centre is not stable in alkali. A formula that neutralises an acidic slurry with a base, or holds the premix at pH 9 while other ingredients dissolve, is running a racemisation step without calling it one. Oxidation is the second. The selenium in L-selenomethionine is a selenide, and the selenoxide is the first oxidation product. Peroxide-based sanitiser residues, hypochlorite rinse water and ozone treatment are all capable of producing it, and the effect is a chromatographic change that an assay calibrated on the parent peak will read as a loss of purity. ## A stability protocol for this material Test the powder and the finished product separately, because they fail for different reasons. For the powder, store the production pack at 25 °C/60% relative humidity and at 30 °C/65% relative humidity, with an accelerated arm at 40 °C/75% relative humidity, and pull samples at the start, then at three, six, twelve and twenty-four months. Test appearance, assay, selenium, specific rotation, loss on drying and microbiology at each point. For the finished product, test the capsule or the stick in its own pack. A capsule shell is a moisture barrier of its own and can protect the powder for longer than the bulk pack; a stick with citric acid and flavour has a different water activity and a different pH at the surface of the powder. Do not transfer a powder result to a gummy. Add one stress arm that is specific to this molecule: hold a sample at pH 9 and 60 °C for a defined period and measure the rotation before and after. If the rotation moves, the process has a racemisation route and the formula needs the pH corrected. That test is quick and answers a question the standard protocol cannot. ## The matrix decides more than the storage In capsules, the usual fillers are inert and the main risks are moisture and segregation. In tablets, compression heat is modest but the granulation step can involve water and heat together, and a wet granulation at alkaline pH is the worst combination for optical purity. In gummies the matrix is the problem. Cooking temperatures above 100 °C, a pH near 3.5 and a water activity around 0.6 put the amino acid in contact with reducing sugars at heat; the amino group reacts, browning follows, and both the assay and the colour move. The controls are to add the selenium source after the cook and to keep the water activity low. In powder sticks the matrix is usually acidic and dry, which is the friendlier case. The risk shifts to uniformity: at 0.05% of the fill, the material must arrive as a premix and be blended long enough to pass a uniformity test. ## Setting the shelf life A shelf life is a statement about a pack, not about a molecule. It comes from real-time data on the production pack, supported by the accelerated arm, and it is written as a retest date for the bulk material and a date mark for the finished product. The two dates answer different questions. The pack matters as much as the data. The standard presentation is a 1 kg foil pouch and a 25 kg fiber drum, and a resealed pouch keeps moisture out better than an opened drum. Storage below 25 °C, away from light and away from oxidising chemicals, is the baseline; the packing and ordering page sets out what the packs contain. The release figures that the study tracks are on the COA page. The method behind the assay and the oxidation peak is described in the HPLC note, and the release and retest workflow is on the quality page. The specification sits on the product page. ### 04 L-Selenomethionine: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/selenomethionine/moq/ Reviewed: 2026-11-19 L-selenomethionine is sold from a minimum of 1 kg, in a 1 kg foil pouch or a 25 kg fiber drum, with a catalog lead time of 1–7 days for a released lot in the standard 40 mesh presentation. A single kilogram is a large quantity of this material in dose terms, so the order conversation is usually about the pack, the presentation and the documents rather than about the tonnage. In one lineOne kilogram is a qualification unit, not a production order: at 40% selenium it carries about 400 g of the element and roughly seven million 55 µg doses. ## Why the minimum is one kilogram The kilogram is the smallest unit that can be drawn from a released lot, sampled, shipped and traced without splitting a batch record. That is a quality logic rather than a commercial one. A buyer who wants 200 g is really asking for a sample, and a sample is handled differently: it carries the lot code of the drum it came from. The dose arithmetic explains why 1 kg lasts. At about 40% selenium, a kilogram carries roughly 400 g of the element, which is about 7.3 million doses of 55 µg. If a bottle holds sixty capsules of 55 µg, one kilogram covers roughly 120,000 bottles before overage and process loss. A brand launching a single SKU will not outgrow the pouch quickly; a contract manufacturer will move to the drum. The same arithmetic sets the sample question. A trial needs enough material for a blend, a fill run and a retained portion, and it needs the certificate that belongs to that material. The quantity is small because the inclusion is small; the certificate that comes with it is the same document as for a drum. ## Packs and what they protect Standard packs · L-selenomethionine | Pack | Net | Fits | Watch | Foil pouch | 1 kg | Samples, trials, small production runs | Reseal after opening; the pouch is the better moisture barrier once opened | Fiber drum | 25 kg | Production runs, contract manufacturing | Ask about the inner liner and whether a desiccant is included Both packs carry the product name, the lot code, the net weight, the selenium content and the retest date. The lot code on the pack has to match the lot code on the certificate and on the retained sample; that three-way match is the traceability chain, and it is worth checking on the first delivery rather than on the tenth. Packing inside the drum is worth asking about explicitly. A drum with a single polyethylene liner and no desiccant is a different proposition from one with a foil liner, and the difference shows up in the loss on drying figure after a few months in a humid warehouse. Ask for the liner specification in writing. ## Lead time and what changes it The catalog lead time is 1–7 days for a standard 40 mesh lot that is already released and packed. That window covers picking, the document set and handover to the carrier; it does not cover transport, customs or the buyer's own incoming inspection. Four things move the date. A different mesh — 80 mesh is a milling step, not a stock item — adds production time. A dilution onto a carrier is a separate blending run with its own uniformity test. Extra testing, such as a chiral purity figure, adds laboratory time. And a destination that needs legalised documents or a specific SDS language adds administrative time. Ask for the planned ship date and the lot code at the point of order, not at the point of dispatch. A supplier who can name the lot before packing is working from a released batch; one who cannot may be planning to pack from a batch still in process. ## What a quotation needs from you Six details that change the offer | Detail | Why it matters | Material and form | “L-selenomethionine” and “selenium 40%” are different requests; the first obliges a rotation and a chiral method, the second does not | Quantity and pack | Pouch or drum, and how many of each; the pack sets the documents and the shipping weight | Presentation | 40 mesh, 80 mesh or a dilution on a named carrier; each is a separate production step | Destination market | EU, US or UK changes the document set, the label file and sometimes the testing | Tests beyond the catalog | A chiral purity figure, a speciation panel or an extra metal is laboratory work, not a line on a stock certificate | Delivery terms and consignee | The Incoterm, the port and the consignee decide who arranges what and which papers travel with the goods Six answers turn a request into an offer that can be checked. A request that names only a selenium percentage leaves the form, the presentation and the market open, and the offer that comes back will be built on assumptions the buyer cannot see. ## Samples and qualification A sample should come from a released lot and should carry that lot's code and certificate. Without the lot code, a sample cannot be compared with the drum that will arrive, and a trial run on an unlinked sample proves very little about the production material. Qualification is the step between the sample and the purchase order. Run the material through the actual process: the blend, the fill, the press or the stick filler. Check uniformity at the inclusion level you will use, because 0.05% of a fill is where segregation shows up. Retain a portion beside the certificate. If the trial raises a result the certificate does not explain, the sensible next step is an independent test on the retained portion rather than a second sample from the supplier. The COA page sets out which lines to compare; the identity page sets out the tests that separate the L form from its alternatives. ## Terms worth fixing in writing Four terms belong in the order rather than in the correspondence. The specification revision, so that the certificate is judged against the document the buyer holds. The remaining shelf life on arrival, expressed as a minimum, because a lot legal on the day of dispatch can be short-dated on receipt. The document list, including the COA per lot, the SDS and any statement the destination market requires. And the quantity tolerance, because a drum lot rarely divides into exactly the ordered weight. Payment terms and the Incoterm belong in the same document. So does the handling of a non-conforming result: who pays for the referee test, and which retained sample is tested. A purchase order that settles all of them is a specification with commercial effect. The parameters are on the product page; the presentation choices are on the grade page; the market documents are on the compliance page; storage and retest are covered on the stability page. The definition of a minimum order is in the MOQ note, and the freight side is on the logistics page. ### 05 Where L-selenomethionine is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/minerals/selenomethionine/compliance/ Reviewed: 2026-11-19 L-selenomethionine is a permitted selenium form for food supplements in the EU, listed by name in Annex II to Directive 2002/46/EC; it is sold in the US as a dietary ingredient and in the UK under the retained version of the same directive. Permission is only the first check. The dose, the contaminant ceiling, the ingredient-list wording and the claim are four separate questions. In one linePermitted form, permitted amount, contaminant ceiling and label wording are four separate checks, and the file has to answer each one for the market on the label. ## Four questions, not one The first question is whether the form may be used at all. The second is how much selenium the finished product may deliver in a day. The third is what else may be in the powder, as ceilings on lead, arsenic, cadmium and mercury. The fourth is what the pack may say. Each has a different legal instrument and a different document as evidence. Keeping them apart prevents the common mistake of reading a permitted form as permission for any dose, or a compliant dose as permission for any wording. A product can pass the first three checks and still fail on the label. ## The European Union Directive 2002/46/EC lists the vitamins and minerals permitted in food supplements in Annex I and the permitted forms in Annex II. Selenium is in Annex I; Annex II names L-selenomethionine alongside selenium-enriched yeast, selenious acid, sodium selenate, sodium hydrogen selenite and sodium selenite. The lists were amended by Regulation (EC) No 1170/2009; check the consolidated text, as of this review. The yeast entry is not the same permission. Its Annex II footnote caps the selenium at 2.5 mg Se/g in the dried product and describes the species distribution, with selenomethionine as the predominant species. A yeast at 1,800–2,200 mg/kg sits below that ceiling; one boosted above it would not meet the entry. Nutrition labelling follows Regulation (EU) No 1169/2011: selenium is declared with its reference value of 55 µg/day for an adult. The tolerable upper intake level used in the EU is 300 µg/day, so a supplement at 55 µg leaves room for the diet and for a second selenium source. Northern Ireland applies the EU regime under the Windsor Framework, so a GB-only label cannot simply be shipped across. ## The United States In the US, selenium is a dietary ingredient and L-selenomethionine sits under the dietary supplement framework rather than the food additive framework. The form must either have been marketed before 15 October 1994 or be covered by a new dietary ingredient notification under 21 CFR 190.6. A specification sheet that does not say which basis applies leaves the brand to prove it. The Supplement Facts panel declares selenium in micrograms and as a percentage of the Daily Value, 55 µg for adults. The ingredient list names L-selenomethionine. The tolerable upper intake level used in the US is 400 µg/day, higher than the EU figure, but that does not make a product portable between markets. Structure and function statements are permitted only with the DSHEA disclaimer and only when they are truthful and not misleading. A disease claim is outside the framework in both markets. ## Contaminant ceilings Heavy metals · EU food-supplement ceiling and catalog limit | Element | EU ceiling in food supplements | Catalog limit, L-selenomethionine | Lead (Pb) | 3.0 mg/kg | ≤3 mg/kg | Cadmium (Cd) | 1.0 mg/kg, 3.0 mg/kg for seaweed-based supplements | ≤1 mg/kg | Mercury (Hg) | 0.10 mg/kg | ≤0.1 mg/kg | Arsenic (As) | No harmonised EU level for supplements; national rules apply | ≤2 mg/kg The ceilings come from Regulation (EC) No 1881/2006, consolidated in Regulation (EU) 2023/915, and they apply to the food as sold rather than to the raw material. At 0.14 mg of L-selenomethionine per capsule, a lead result at 3 mg/kg contributes well under a nanogram of lead to the finished capsule, so this material is rarely the binding constraint; the practical work is on the excipients, the shell and the water. Microbiology follows the same logic. The catalog limits — APC ≤1,000 cfu/g, yeast and mould ≤100 cfu/g, E. coli and Salmonella absent — are raw-material limits, and the finished product carries its own. The methods are described in the ICP-MS note and the microbiology note. ## What the label may say The ingredient list names the form: “L-selenomethionine” in the EU and the UK, with selenium also declared in the nutrition table. “Selenium” alone describes the nutrient, not the ingredient. “Organic selenium” is a chemistry description and a labelling hazard. In EU law “organic” refers to organic farming under Regulation (EU) 2018/848, and a consumer label that uses the word for an added amino acid invites a misdescription finding. Technical documents may describe the carbon-bound form; the pack should name the molecule. Any nutrient claim has to be on the authorised list with its conditions of use, and a claim written for one selenium form should not be assumed to fit another. This page does not restate the authorised wording and makes no disease claim. A claim is a separate review with its own evidence file. ## The file a brand needs Six documents carry most of the weight: the specification sheet; the certificate of analysis for the lot; the safety data sheet; the allergen and composition statements, including whether the material is fermentation-derived; the contaminant and microbiology methods; and the stability data behind the shelf life. Add the origin statement and the manufacturing flow chart. Two declarations are easy to forget: that the material has not been irradiated and that it has not been treated with ethylene oxide. Both belong in the file before the first audit. The batch results behind these documents are on the COA page. The presentation choices are on the grade page; ordering logistics are on the ordering page. The catalog specification is published on the product page. The market summaries are on the EU, US and UK regulatory pages, and the 55 µg reference value is in the NRV note. ## A file checklist Six checks before a label is released | Check | Evidence | Form permitted in the destination market | Annex II listing, or the US basis for the dietary ingredient | Ingredient list names the form | Approved artwork against the certificate | Daily selenium against the reference value and the upper level | Dose calculation from the assay and the selenium result | Contaminant results inside the ceilings | Lot COA plus the finished-product test | Claim on the authorised list, with its conditions | Claims file, signed off before artwork release | Documents complete and current | Specification revision, SDS version, statements dated Six checks, six pieces of paper. A file that can produce them on request is a file that survives an audit; a file that answers with a product name is a file that has not been built yet. ### 06 How we prove an L-selenomethionine lot is the L form URL: https://nutrition.rainwoodbio.com/products/minerals/selenomethionine/identity/ Reviewed: 2026-11-19 Four pieces of evidence make an L-selenomethionine lot what it says it is: the documentary identity, the infrared spectrum, the specific rotation and the selenium figure read against the stoichiometry. The rotation separates the L form from the D form and from a racemate; the selenium figure separates the amino acid from a blend with its sulfur analogue. In one lineA certificate can show 40% selenium and still describe the wrong enantiomer; the rotation, the chiral method and the speciation are what make the L form a fact. ## The four layers of identity Identity layers · what each proves and what it misses | Layer | Evidence | Proves | Misses | Document | Name, CAS 3211-76-5, C5H11NO2Se, appearance | What the lot is called | Everything about the drum | Spectrum | IR against a reference | The functional groups and the solid state | Chirality; a close analogue | Chiral | Specific rotation, chiral HPLC | Which enantiomer, and how much of the other | Purity of the molecule itself | Composition | Selenium by ICP-MS, loss on drying, metals | Whether the element and the mass balance fit the formula | Which enantiomer carries the selenium The layers are independent by design. A racemised lot passes the document, infrared and selenium layers; a lot diluted with methionine passes them too. Only the chiral layer catches the first, only the composition layer the second. ## The selenium fraction is a stoichiometric check L-selenomethionine is C5H11NO2Se, molar mass about 196.1 g/mol; selenium (78.97 g/mol) is 40.3% of that mass, fixed by the formula, not the supplier. Multiply the assay by 40.3% and the answer must land inside 39.0–41.0%: 97.0% assay gives 39.1% selenium, and 41.0% selenium implies 101.8% assay. The window cuts both ways. Selenium below 39.0% with a normal assay means material with little or no selenium. Methionine, the sulfur analogue, is the obvious candidate: one atom different, almost the same size, colour and solubility. It is chiral too, so the rotation can stay in the window while selenium falls; that is why the selenium line is the screen. A figure above 41.0% is the other signal. A pure amino acid cannot exceed 40.3% selenium, so 42% or 45% means a selenium-rich species is present: selenite at about 46%, selenium dioxide at about 71%, or a selenium-enriched material blended in. Loss on drying completes the balance. At ≤0.5%, water cannot account for a gap of several percentage points between the assay and the selenium figure, so such a gap is chemistry, not moisture. ## What the rotation actually proves Specific rotation sees chirality directly. The L form rotates polarised light one way and the D form the other, by the same magnitude in an achiral solvent; a racemic mixture reads close to zero. The catalog window is +17.0° to +19.5°, and its arithmetic is instructive. Take the middle of the window, about +18.3°, as the pure L value, with the D form rotating the same amount the other way. The window then allows about three and a half percent of the D form before the reading falls to +17.0°: a mixture at 96.6% L and 3.4% D sits on the limit. The upper part of the window is not reachable by composition, so it is an allowance for method variation rather than a purity statement. The gate catches gross racemisation but does not quantify a small D content. A supplier claiming an enantiomeric purity figure should show the chiral method behind it, and the rotation should carry its temperature, concentration, solvent and wavelength — a bare number cannot be reproduced. ## The two instruments, and their blind spots The assay is by HPLC; read the method closely. L-selenomethionine has no strong chromophore, so detection decides what the peak means: derivatisation or mass detection sees the molecule, while weak absorbance is exposed to co-elution. A standard reversed-phase column does not separate enantiomers. That needs a chiral stationary phase — crown ether, teicoplanin or ligand exchange — or chiral derivatisation, and the report should name the column and elution order. Selenium is measured by ICP-MS, which destroys the molecule and counts the element. It is blind to the form and complements the rotation: one test sees the element, the other the shape. The most abundant isotope, 80Se, sits under an argon dimer at mass 80, so a laboratory uses a collision cell or measures 78Se or 82Se, and the certificate should say which. Complete digestion matters too: an undigested residue under-reports the element. ## What XRD can and cannot add X-ray diffraction is a solid-state test that supports identity for selenomethionine rather than establishing it. A crystalline lot gives a sharp pattern for the L-selenomethionine phase, so XRD can confirm crystallinity, detect a polymorph or solvate, and reveal a crystalline diluent such as methionine at a sufficient level. It cannot see chirality: the L and D forms are mirror images with mirror-image lattices, so a pure D lot can diffract identically. It also misses amorphous material and anything below its detection limit. Identity stays with specific rotation and chiral HPLC for the enantiomer, IR for the functional groups and ICP-MS for selenium. XRD is a form check, not proof of the named substance. ## The routes that produce a false positive Adulteration routes and the test that catches each | Route | Why it appears | Caught by | DL-selenomethionine or D form | Racemic synthesis is shorter than a resolution step | Specific rotation; chiral HPLC | Methionine | Same size and appearance, no selenium | Selenium figure; IR; chromatographic resolution | Selenite or selenate | An inorganic selenium salt that lifts the element figure | Selenium above 41.0%; speciation; ion chromatography | Non-selenium amino acid | Bulking that passes appearance and flow | Selenium figure; assay; IR Run the checks in certificate order: the two percentages against each other, then the rotation, then the spectrum. Most false lots fail one of the first two. ## What to write into the specification - “L-selenomethionine, CAS 3211-76-5, C5H11NO2Se, white to off-white crystalline powder.” - “Assay 97.0–103.0% as-is by HPLC, with the column, detection mode and basis named.” - “Selenium 39.0–41.0% by ICP-MS, with the isotope and the digestion stated.” - “Specific rotation +17.0° to +19.5°, with temperature, concentration and solvent stated.” - “Enantiomeric purity by chiral HPLC on request, with the limit of quantification reported.” A line that reads “selenium 40%” specifies an element, not this material. The COA page shows where each figure sits on the certificate, and the grade page explains why the yeast route cannot be tested this way. The full specification is on the product page. ## Five questions for the supplier - What is the specific rotation, and under which conditions was it measured? - Which HPLC method produced the assay, and does it separate enantiomers? - Which isotope and digestion were used, and what is the limit of quantification? - Is the lot synthetic or fermentation-derived, and is any yeast material present? - Can the assay, selenium and loss on drying be reconciled on one mass balance? Five answers describe a material; one selenium percentage describes an element. The tests are described in the HPLC note and the ICP-MS note, the release workflow is on the quality page, and the label rules are on the compliance page. ### 02.1 Selenomethionine vs selenium yeast: form, speciation and the label URL: https://nutrition.rainwoodbio.com/products/minerals/selenomethionine/grades/se-met-vs-yeast/ Reviewed: 2026-11-19 L-selenomethionine and selenium-enriched yeast are named as separate ingredients in law, and they deliver the same element in very different packages. One is a defined molecule at 39.0–41.0% selenium; the other is a yeast matrix at roughly 0.2% selenium, in which most of the element is bound inside yeast protein. The label, the assay, the dose and the batch-to-batch behaviour all follow from that difference. In one lineSelenium yeast is a matrix that contains selenomethionine; L-selenomethionine is the molecule itself, and the label, the assay and the dose all follow from that difference. ## A molecule and a matrix L-selenomethionine is a single chemical substance: CAS 3211-76-5, formula C5H11NO2Se, one selenium atom per molecule, a defined molar mass and a defined specific rotation. Everything a buyer needs to describe it fits on one specification sheet, and a certificate can close the description with an assay, a selenium figure, a rotation and an infrared spectrum. Selenium-enriched yeast is a biological material. Saccharomyces cerevisiae is cultured in the presence of a selenium source and incorporates part of the element into its own proteins, largely as selenomethionine in place of methionine and as selenocysteine. The dried product also contains yeast protein, cell wall material, residual inorganic selenium and the usual microbial load of a fermented ingredient. Its specification therefore carries a protein figure, a moisture limit, a microbial panel and a selenium figure, and the selenium figure is only the beginning of the description. The two are related but not interchangeable: selenomethionine is one species inside the yeast, and the yeast is not a form of the amino acid. Saying that yeast “contains selenomethionine” is a statement about speciation; saying that the ingredient is selenomethionine is a statement about the material. The label has to make the second statement, not the first. ## Concentration and speciation The two organic sources · what the certificate has to show | Item | L-selenomethionine | Selenium-enriched yeast | Selenium content | 39.0–41.0% (ICP-MS) | 1,800–2,200 mg/kg (ICP-MS) | Selenium species | One defined molecule | A distribution: protein-bound selenomethionine and selenocysteine, plus a residual inorganic fraction | Mass for 55 µg Se | About 0.14 mg | About 27.5 mg | Identity tests | IR, HPLC assay, specific rotation, ICP-MS | ICP-MS plus speciation by HPLC-ICP-MS; protein; microscopy and microbial panel | Batch variation | Chemical: purity, enantiomer, moisture, mesh | Biological: species distribution, protein, colour, microbial load The concentration gap is about two hundredfold, and explains most of the formulation consequences: a capsule that holds 0.14 mg of L-selenomethionine easily holds 27.5 mg of yeast, a stick pack holds either, and a softgel with a small fill has room only for the amino acid. It also explains why the yeast is usually blended as a powder while the amino acid is usually handled as a premix. Speciation is the second consequence. Total selenium in yeast says nothing about how much of it is organic, and a specification that names only the selenium figure can be met by a yeast with a different species profile. The supplier should report the selenomethionine fraction from a speciation method, not just the element. ## What the label may name In the EU, both sources are separate entries in Annex II to Directive 2002/46/EC. “L-selenomethionine” and “selenium-enriched yeast” are different ingredient names, and the yeast entry carries its own conditions: the dried product may not exceed 2.5 mg Se/g, and the footnote describes the species distribution with selenomethionine as the predominant species. The catalog yeast at 1,800–2,200 mg/kg sits comfortably under that ceiling. A product made with yeast cannot name selenomethionine as its ingredient, even though most of its selenium is bound as selenomethionine; the ingredient is the yeast. A product made with the amino acid cannot name yeast. Where a yeast is standardised or a species figure is claimed, the speciation result belongs in the technical file and the ingredient list still names the yeast. In the US the ingredient list works the same way, with selenium declared in the Supplement Facts panel and the source named in the ingredient statement. In both markets the nutrition declaration describes the element, and the ingredient list describes the source. ## How each one is tested The amino acid has a rotation; the yeast does not. A certificate for selenium yeast that offers a specific rotation is describing a test that does not apply to a matrix, and a certificate for L-selenomethionine that offers only a selenium figure has left out the only line that establishes the L form. That asymmetry is a quick way to judge a supplier. Yeast is tested by total selenium plus speciation, protein and the microbial panel. The speciation method — usually HPLC coupled to ICP-MS — separates the selenium species after extraction and reports how much sits in each. Extraction efficiency is the weak point: an unextracted residue under-reports the organic fraction, so the report should state the extraction and the recovery. The amino acid is tested by assay, selenium and rotation, with a chiral method when an enantiomeric figure is claimed. The method details are on the identity page, and the certificate lines are on the COA page. ## When each source fits Choose L-selenomethionine when the dose has to be defined by a single molecule, when the fill weight is tight, when the formula needs a white powder that dissolves to a clear solution, or when the file has to document the form with a rotation and a chiral method. It also suits a product that must avoid a yeast-derived matrix, because the material is a defined amino acid rather than a fermented ingredient. Choose selenium yeast when the ingredient list should read as a cultured food ingredient, when the fill weight has room for about 27.5 mg per dose, when the formula can carry a light brown powder and its microbial load, and when the supplier can document the species distribution. The yeast's protein and cell wall material are part of the ingredient and belong in the allergen and composition statements. Both are organic selenium in the chemical sense, and both are lawful ingredients in the markets covered here. The choice is a formulation and labelling decision, not a question of which one is better in the abstract. The selenium yeast specification and the L-selenomethionine specification are the two documents to compare side by side. ## What changes when you switch The mass per dose changes by about two hundredfold, so the fill weight, the blend order and the uniformity test all change. The ingredient list changes, and with it the artwork, the claims file and the market notification. The assay method changes: a yeast specification is built on speciation, while the amino acid is built on assay and rotation. The microbial specification, the allergen statement and the colour of the powder change as well. A switch is a new product, not a substitution. The safest route is to handle it as a reformulation: new dose calculation, new uniformity data, new stability arm, new label. The grade page sets the three selenium sources side by side, the compliance page covers the label and market rules, and the Annex II note lists how the permitted forms are named. ### 01 What the COA for vitamin A 500,000 IU/g actually contains URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-a/coa/ Reviewed: 2026-11-19 A vitamin A certificate has to do two jobs at once: report the IU/g result and describe the matrix that carries it. The expected lines are appearance, HPLC identification, assay in IU/g, carrier, loss on drying, particle size, heavy metals and microbiology, each with a method and limit. Everything quoted here is the catalog specification for the spray-dried acetate; a particular pouch or drum is confirmed by its batch COA. Because the IU is a converted unit, the sheet must show the conversion. In one lineThe 500,000 IU/g figure is an HPLC result expressed in a unit, so the certificate has to show the method, the basis and the carrier that make up the rest of the powder. ## The certificate as a test report Every row should stand on its own: the parameter, the method that produced the number, and the limit the lot was released against. For this product there is a fourth question: the vitamin is a small part of a spray-dried powder, and the matrix is the rest. Identity, assay and matrix · vitamin A 500,000 IU/g powder | Parameter | Method | Release limit | Appearance | Visual | Light yellow to yellow, free-flowing powder | Identification | HPLC retention time | Conforms to a retinyl acetate reference standard | Vitamin A | HPLC, UV detection | ≥500,000 IU/g | Retinol equivalent | Calculated from the assay | ≥150,000 µg RE/g (150 mg RE/g) | Carrier | Declaration | Gelatin, sucrose and starch, each named | Loss on drying | Gravimetric | ≤5.0% | Particle size | Sieve analysis | ≥95% through 40 mesh Contaminant and microbiological limits | Parameter | Method | Release limit | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent The lot code, the manufacturing date, the retest or expiry date, the pack size and the specification version belong on the same sheet. A column filled with the specification range is a copy of the gate, not a measurement; “passes specification” is a conclusion the reader should be able to reach from the numbers above it. ## What the IU figure measures The IU is a unit of vitamin A activity, not a unit of mass. For retinol and its esters the convention assigns 3.33 IU to one microgram of retinol, so one IU is 0.3 µg of retinol equivalent. The laboratory measures the ester or the retinol by HPLC and the certificate converts that mass result into IU/g. The IU/g value is arithmetic on top of the chromatogram, not a separate determination. One gram of the 500,000 IU/g powder contains 150 mg of retinol equivalent, or 15% by mass. Pure retinyl acetate is about 2.9 million IU/g, so this grade contains roughly 17% ester and about five times as much carrier, moisture and minor solids. The same arithmetic shows that an IU figure is a statement about dilution as well as about potency. The certificate should say whether the method measures the ester directly or saponifies it to retinol. A direct method reports the acetate; saponification reports total vitamin A after hydrolysis, including free retinol. Both are legitimate, but two numbers are comparable only when the method and the basis match. With a 5.0% loss-on-drying allowance, the dried-basis result runs above the as-sold figure. ## Release limit versus batch result The specification supplies the pass mark; the batch result supplies the measurement. Keep them in separate columns and state the method once per line. The batch COA confirms the lot, while this page states the catalog limits the lot is released against. The carrier is declared, not assayed: the certificate names gelatin, sucrose and starch and, on request, their proportions. Identification is a pass/fail comparison with a standard. The assay, moisture, mesh, metals and micro results are measured values; every one needs a unit and a limit. The catalog sheet does not set a free-retinol or isomer limit. When oxidation is a concern, ask for the chromatogram and the stability data rather than reading the IU result as the whole picture. A peak that passes the assay can still sit beside a rising retinol or cis-isomer region. ## What moves between batches The assay follows the solids in the spray-drying feed: more vitamin premix per part carrier lifts the IU/g, while dryer losses pull it down. A carrier lot with a different moisture content shifts the as-sold figure without changing the vitamin input. The carrier matters in its own right. Gelatin, sucrose and starch differ in flow, density, dispersion and hygroscopicity; a change in their ratio or in the gelatin grade alters the powder even when IU/g stays inside the range. Milling and sieving set the 40 mesh figure, and a worn screen shows up as a particle-size shift. Colour is a crude signal, but it often flags what the assay does not. A deeper yellow can reflect a higher carotenoid load, heat exposure or oxidation while the assay passes; request the batch record before rejecting a lot on colour alone. A drift across several lots tells you more than a single result close to its limit. ## When to order an outside test Use an outside laboratory when the source is new, when the market is new, when a label must be defended, or when a result is disputed. The useful panel is HPLC against a retinyl acetate standard, a hydrolysis step followed by gas chromatography of the fatty acid to show acetate rather than palmitate, ICP-MS and the micro suite. Ask the laboratory for its detection limit for retinyl palmitate and beta-carotene. Without a stated limit, “not detected” describes the method's reach, not the sample. The report should name the column, mobile phase, wavelength and basis, and state whether the sample was saponified. When a result is contested, the referee should be a laboratory with no stake in the answer. Give it the retained sample, the certificate and the specification, and ask for the tests that separate the esters; the sample tested should be the sample retained. ## What to compare between suppliers Seven fields make two quotations comparable: the ester and the IU/g; the assay method and standard; the retinol equivalent in µg/g; the carrier and gelatin source; loss on drying; particle size; and the contaminant panels. Matching IU/g while differing on ester or basis does not make two offers equivalent. Traceability is the second check. One lot code has to appear in three places: the certificate, the pack and the retained sample. The certificate should identify the manufacturer and the carrier; a genuine certificate still does not prove that the pack in front of you came from that lot. Request the version of the specification that governed the release. The catalog table is on the vitamin A product page. For the ester decision, use the grade page; for identity testing, the identity page; for ordering, the MOQ page. For the separation, see the HPLC method note; for certificate vocabulary, the COA glossary entry; for release, the quality page. ### 02 Acetate or palmitate: choosing a vitamin A grade URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-a/grades/ Reviewed: 2026-11-19 Retinyl acetate and retinyl palmitate are both vitamin A esters, but they are not interchangeable gram for gram: the acetate carries more retinol per gram, the palmitate is more lipophilic, and the label names whichever ester is used. The 500,000 IU/g spray-dried acetate is built for dry blends, while an oil or an emulsion may suit the palmitate better. A switch changes the IU density, the carrier load, the stability file and the ingredient declaration. The ester is therefore a formulation decision before it is a purchasing one. In one lineAcetate and palmitate are different esters with different masses, so the grade is chosen by IU density, dosage form and label name, not by the IU figure alone. ## Why the ester is the first decision A vitamin A specification that stops at “500,000 IU/g” does not identify the material. The same IU figure can be reached with retinyl acetate, retinyl palmitate or a blend, at different dilution rates, in different carriers. The ester sets the molecular mass, the amount of powder needed for a dose, the behaviour in oil and the name that appears on the label. Those four consequences are why the ester belongs in the first line of the specification, not in a footnote. Both esters are hydrolysed to retinol in the same way for the IU calculation, so the arithmetic of the label is shared. The physical material is not. A formulator who compares two quotations on IU/g alone is comparing a number, not a raw material. ## The two esters side by side Retinyl acetate and retinyl palmitate · identity and potency | Property | Retinyl acetate | Retinyl palmitate | CAS | 127-47-9 | 79-81-2 | Formula and mass | C22H32O2 · 328.49 g/mol | C36H60O2 · 524.86 g/mol | Retinol per gram of pure ester | About 872 mg/g | About 546 mg/g | Pure ester potency | About 2.9 million IU/g | About 1.8 million IU/g | Ester in a 500,000 IU/g powder | About 17% by mass | About 27% by mass | Lipophilicity | Lower; more crystalline | Higher; oily or waxy | Usual presentation | Spray-dried powder, oil | Oil, emulsion, spray-dried powder | Ingredient name | Retinyl acetate | Retinyl palmitate The mass difference is the reason for the dilution difference. One gram of pure retinyl acetate carries about 2.9 million IU, so a 500,000 IU/g powder is roughly one part ester to five parts matrix. Palmitate carries about 1.8 million IU/g, so the same 500,000 IU/g grade needs about 27% ester and less carrier. The palmitate powder therefore contains more ester mass for the same IU figure, which matters when the dose is weighed or when the carrier contribution has to stay low. ## What changes in the powder Retinyl acetate is a crystalline solid; retinyl palmitate is an oil or a waxy solid at room temperature. That difference drives the powder technology. An acetate grade is usually spray-dried into a free-flowing matrix and sieved to a declared mesh; a palmitate grade is more often emulsified before drying, because the oil has to be dispersed in the carrier. The two powders can look similar and behave differently in a blender. Stability follows the same split. The dry acetate powder is protected by the matrix and the pack, while an oil or emulsion exposes the ester to dissolved oxygen, light and the carrier oil's own oxidation. A palmitate solution is not automatically the more stable option; the matrix and the pack decide. On a switch, check bulk density, flow, dispersion in warm water, particle-size distribution and segregation in a dry blend. A powder that flows well in one carrier can bridge in a tablet hopper in another. Compression behaviour, capsule fill weight and blend uniformity are formulation tests, not certificate lines, and they belong in the trial rather than in the purchase order. ## Matching the ester to the dosage form For tablets and capsules, the dry acetate powder is the straightforward choice: it is free-flowing, sieved to 40 mesh and carries the vitamin in a matrix that can be blended. For a softgel or an oil, the palmitate is more soluble in the oil phase, while an acetate oil can also be used if the formula and the stability data support it. For an emulsion, a gummy or a fortified beverage, the decision turns on how the vitamin is dispersed and how much heat the process applies, not on the ester name alone. The process conditions belong in the comparison. A powder added at the end of a dry blend sees little heat; a vitamin added before a cook or a pasteurisation step sees more. The same ester can be a good choice in one process and a poor one in another. Ask for stability data in the intended matrix rather than assuming that a raw-material result transfers. ## What to write in the specification A complete line reads: retinyl acetate, 500,000 IU/g by HPLC, carrier gelatin, sucrose and starch, loss on drying ≤5.0%, ≥95% through 40 mesh, with the heavy-metal and micro panels stated. The ester name, the IU/g, the method and the carrier are the four parts that make the line usable. Add the gelatin source, any declared antioxidant, the IU basis and the overage policy if the formula depends on them. - Name the ester, not just “vitamin A”. - State the IU/g and the method behind it. - Name the carrier and its proportions where they affect the label. - State the gelatin source and any allergen consequence. - State the loss on drying, the mesh and the contaminant panels. - State whether an antioxidant is present and how it is declared. A switch from acetate to palmitate is a new specification, a new certificate and a new label. The old stability file does not carry over, because the matrix, the dose weight and the degradation profile have changed. ## When not to switch Do not switch ester to close a quotation gap alone. The two materials differ in potency density, so a “same IU” swap changes the weight of powder in the formula, the carrier load and possibly the tablet or capsule size. If the label already names one ester, a switch also requires a new ingredient declaration and a new artwork cycle. A switch is reasonable when the dosage form demands it, when the current ester is not available in the grade or carrier needed, or when the stability data shows a real advantage in the intended matrix. In each case, ask for the new certificate, the chromatogram, the carrier declaration and a stability summary before the first production batch. The vitamin A product page carries the catalog specification; the COA page explains how the IU and carrier are reported; the stability page covers the storage and process variables; and the acetate versus palmitate page sets out the detailed comparison. The assay glossary entry defines the result basis. ### 03 Vitamin A is sensitive to light, heat and oxygen; the carrier decides the rest URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-a/stability/ Reviewed: 2026-11-19 Retinyl acetate is degraded by light, heat and oxygen, and the powder survives because the carrier matrix, any declared antioxidant and the pack take most of the exposure. The 500,000 IU/g spray-dried powder puts the vitamin into a protective matrix, but that matrix has limits: it can pick up moisture, a folded pouch is no barrier, and no matrix can protect the vitamin from a hot process step. A stability file has to test the finished matrix and the finished pack, not only the raw material. In one lineRetinyl acetate decays through light, heat and oxygen; the carrier, the antioxidant and the pack are what keep the powder inside its specification. ## The powder in the sealed pack In the dry powder, the vitamin is dispersed in gelatin, sucrose and starch. The matrix immobilises the ester and slows oxygen ingress, which makes a sealed powder the most forgiving form. The certificate limits define the matrix that protects the vitamin: loss on drying at or below 5.0%, a declared carrier and a 40 mesh powder that does not segregate in the pack. The range uses two packs: a 1 kg foil pouch and a 25 kg fiber drum. Both block light while closed, and both fail if the seal or closure is damaged. A folded pouch or an open drum in a warm room lets moisture and light in and lets the matrix cake. Keep the pack cool, dry and away from light, and close it after each use. ## Oil, emulsion and the gummy matrix An oil has no water, but it introduces its own reactions. The oil itself can oxidise, and the peroxides it forms can attack the vitamin. Light also passes through many oils and through a clear softgel shell. Softgel protection has three parts: an opaque shell, a controlled headspace, and an oil that resists oxidation. The oil and its peroxide value belong in the specification; the oil is part of the stability system, not a neutral vehicle. An emulsion, a beverage or a gummy forces a fat-soluble ester into a water-based matrix. The emulsion or dispersion is then the weak link: light in a clear bottle, dissolved oxygen, pasteurisation heat and droplet coalescence can shorten shelf life before the ester itself changes. A late addition cuts the heat load; it does not remove the need to test the finished matrix. Acid is a specific risk in beverages. The ester can hydrolyse to retinol and the corresponding fatty acid, and free retinol is more exposed to oxidation than the ester. A low-pH matrix therefore needs its own stability data, not a projection from a neutral powder. ## What drives the loss Degradation routes for retinyl acetate and the controls that address them | Factor | What it does | Control | Light | Isomerises the conjugated chain and fades the powder | Opaque or amber pack, light-protective carton, opaque shell | Heat | Raises isomerisation and oxidation during drying, blending or cooking | Lower process temperature, shorter residence time, cool before packing | Oxygen | Oxidises the chain and consumes any antioxidant | Sealed pack, controlled headspace, declared antioxidant | Moisture | Plasticises the matrix, causes caking and speeds the other routes | Loss on drying ≤5.0%, sealed pack, dry storage | Trace metals | Catalyse oxidation at low concentration | Source control, heavy-metal panel on the certificate | Acid | Hydrolyses the ester to retinol and acetic acid | Keep the vitamin out of the acid phase, test the finished matrix No single factor leads in every pack. A sealed powder is already protected from moisture and oxygen, so light and heat do most of the damage; in oil or emulsion, oxygen and light move to the front. Each dosage form therefore has a different failure route, so a raw-material result does not carry over to the finished product. ## A stability protocol that can be audited Before the first sample enters the chamber, the protocol should fix the pack, the conditions, the time points, the method and the acceptance limits. A typical design holds samples at 25 °C and 60% relative humidity for the long term and at 40 °C and 75% relative humidity for acceleration, with a light-exposure arm following ICH Q1B and an open-pack arm. A clear bottle or a clear capsule makes the light arm mandatory. Every time point needs the assay (IU/g or µg RE/g), loss on drying, appearance and micro, plus physical tests for an oil or emulsion. Test the finished article in the pack that will be sold: a pouch, a stick pack, a capsule and a gummy are separate stability subjects even when the vitamin input is the same. Retain a sample from each lot so that a later result can be compared with the release result. ## Formulation and process choices An overage is a stability choice, not a labelling device. A formula that starts above the label claim because the vitamin will decline needs data for that matrix and pack; an overage copied from another product is a guess. The overage and the analytical tolerance should be agreed in writing before the first batch. An antioxidant, if one is used, has to be declared and tested. The catalog sheet for this acetate powder does not name one, so the buyer should ask whether the matrix contains an antioxidant and, if it does, which one and at what level. The same question applies to any chelating agent or processing aid. These are label and stability facts, not trade secrets. The process can undo a good formula. Add the vitamin as late as the process allows, keep the blend below the temperature at which the matrix softens, avoid prolonged exposure to air during milling or sieving, and cool before packing. Nitrogen flushing or a vacuum step can reduce headspace oxygen, but neither replaces a sealed, opaque pack. ## Shelf life and the retest date The shelf life is assigned from stability data for the specific matrix and pack; the retest date on a certificate is not a shelf life and cannot be extended by re-assaying a stored sample. Re-assay can confirm that a retained sample still meets the IU limit, but not that the pack protected the powder over the full period or that the label claim held. Change the carrier, the pack, the mesh or the process, and the previous conclusion no longer applies until the new system is tested. A change of ester is no different. For a new source, ask for the stability summary and the pack details, and compare them with the shipping pack. The vitamin A product page lists the catalog specification; the COA page explains the loss-on-drying and assay lines; the MOQ page covers the packs; and the acetate versus palmitate page compares the two esters in a matrix. The HPLC method note describes the assay that measures the decline. ### 04 Vitamin A: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-a/moq/ Reviewed: 2026-11-19 The entry order is a 1 kg foil pouch of the 500,000 IU/g acetate powder; production runs use the 25 kg fiber drum. The pouch is a released pack with its own lot certificate, so it can carry a trial, a carrier check and a label review. Standard lead time is 1–7 days once the specification and the documents are fixed. In one lineA single kilogram covers the qualification work — assay, carrier check, trial — before a production order. ## Why the minimum is 1 kg A 1 kg pack is large enough to run a blend trial, fill a small capsule or tablet batch, check the carrier against the intended matrix and keep a retained sample. It is also small enough to be drawn from a production lot rather than from a separate hand-made batch. That last point matters: a sample from the lot you will buy tells you about that lot, while a special “sample batch” tells you only what the plant can do when it is not under production pressure. The minimum is not a marketing threshold. It is the smallest unit that can be labelled and traced with a lot code, a certificate and a retained sample without repacking in a way that breaks the chain. Below 1 kg, the material usually has to be subdivided, and subdivision adds a handling step that the certificate does not describe. ## The two standard packs The 1 kg foil pouch is the trial and small-production pack; the 25 kg fiber drum is the production pack. Each is opaque while closed, and each depends on its seal or lid. The pouch should be resealed after opening and the drum should be closed between uses; neither pack is designed to hold an open surface for a long period. The pack label should repeat the essentials: product name, ester, IU/g, carrier, lot code, net weight, dates and storage condition. If the material is repacked, the new pack has to keep the lot identity and the original certificate. Transferring powder into a clear jar for convenience removes the light barrier and is not a storage pack. Ask for the pack dimensions and the pallet configuration if the material is going into a production line with limited headroom. A 25 kg drum is a handling unit as well as a container; its lid and label are part of the pack record. ## Lead time and what starts the clock The standard lead time is 1–7 days for a catalog pack held in stock. The clock starts when the purchase order, the specification version and the document requirements are agreed, not when the first email is sent. A custom IU, a different carrier, a special mesh or an added document set can move the order out of the standard window, and the quotation should say so. The 1–7 days is a dispatch window, not a delivery promise; transport, customs and the buyer's goods-inward tests run on separate clocks. For a first shipment, allow time for the certificate review and a sample check before the material is released to production. If the line is running to a fixed date, tell the supplier the date at the quotation stage rather than after the order. ## The six details a quotation needs What to put in a vitamin A quotation request | Item | Why it changes the quotation | Ester and grade | Retinyl acetate and retinyl palmitate are different materials, and the IU/g has to be stated | IU/g and basis | The figure, the method and whether it is as sold or on the dried basis | Carrier and gelatin source | Gelatin, sucrose and starch proportions, and the gelatin origin for the label | Pack and quantity | 1 kg pouch or 25 kg drum, and the number of units | Destination and delivery terms | The market, the address and the Incoterms decide the logistics line | Documents and special requirements | COA, TDS, SDS, allergen, GMO, vegan, halal or kosher statements A quotation that answers only the first and fourth lines is a pack quotation, not an offer for a specification. The other four lines are where a like-for-like comparison is won or lost. ## Samples and qualification The sample should come from the lot allocated to the order, not from a separate stock kept for samples. The sample label should carry the same lot code as the certificate and the commercial pack. Test the assay, the loss on drying, the particle size and the carrier behaviour in your own matrix; a certificate review alone does not show how the powder flows on your line. Keep part of the sample as a retained reference. If a later delivery differs in colour, flow or dispersion, the retained sample is the comparison that makes the conversation specific. For a regulated market, the sample should be stored under the same conditions as the production material so that the comparison is meaningful. ## Terms worth agreeing before the order The specification version, the IU basis, the overage policy and the acceptance tolerances should be in the purchase order, not only in the certificate. Agree what happens if a lot falls outside the specification, who pays for the return and how a replacement lot is released. Agree the retained-sample period and the document set that ships with each lot. Commercial terms such as payment, delivery and Incoterms belong in the quotation and the contract. This page does not quote a figure; it sets out the units and the information that make a quotation comparable. The catalog ranges are listed on the vitamin A product page; the certificate lines are on the COA page; the market file is on the compliance page; and storage is on the stability page. The MOQ glossary entry and the RFQ template can be used to build the request. ### 05 Where vitamin A is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-a/compliance/ Reviewed: 2026-11-19 In the EU, retinyl acetate appears on the food-supplement positive list; in Great Britain the same form is retained; in the US it is sold as a pre-1994 dietary ingredient. The rules are tied to the ester, so the specification, certificate and label all have to use that name. The file must also connect the carrier, the contaminant results and the claim boundary to the market where the product is sold; the finished label stays with the brand owner. In one lineAcceptance in the EU, the US and the UK is only the first check; level, label and carrier must also fit. ## The framework in one view In all three markets the raw material is sold as a supplement ingredient, not as a drug. The supplier provides a material and a document set that match the specification; the brand owner places it in a compliant finished product, with a label and, if used, a permitted claim. The two jobs meet at the certificate and the specification. Retinyl acetate, retinyl palmitate and beta-carotene are separate ingredients with different analytical standards and label names, though all three can contribute vitamin A activity. A file that proves “vitamin A” without the ester does not prove the ingredient purchased. ## European Union Directive 2002/46/EC lists retinyl acetate among the permitted vitamin A forms in Annex II, Part A. Labelling follows Regulation (EU) No 1169/2011 and the supplement-specific provisions. Vitamin A is declared in µg RE per portion and as a percentage of the 800 µg RE nutrient reference value. The ingredient list names retinyl acetate and the carriers gelatin, sucrose and starch. The EU does not set one harmonised maximum for vitamin A in supplements; several member states apply national rules, so check the destination market. Contaminants are governed by Commission Regulation (EU) 2023/915, which replaced Regulation (EC) No 1881/2006 and sets the lead, cadmium and mercury limits below. Arsenic is a specification limit, not a general EU supplement maximum. Check the current text before relying on a limit. ## United States Retinyl acetate is a dietary ingredient that was on the market before 1994, so it is used under DSHEA rather than through a premarket approval. The supplier's file should support that status and the identity of the ingredient. Manufacturing is covered by the dietary supplement cGMP in 21 CFR 111, and the finished product carries a Supplement Facts panel under 21 CFR 101.36. Vitamin A is declared in mcg RAE against a Daily Value of 900 mcg RAE, with the source in parentheses, for example “Vitamin A (as retinyl acetate)”. The other ingredients — gelatin, sucrose and starch — are listed separately. The US has no federal heavy-metal maximum for supplements; the specification is set by the buyer, while California's Proposition 65 adds a separate warning route for lead. A disease claim would make the product a drug, so the claim boundary is part of the label review. ## United Kingdom Great Britain retains the EU supplement framework through the Food Supplements (England) Regulations 2003 and devolved equivalents. Retinyl acetate remains a permitted form, vitamin A is declared in µg RE against the 800 µg NRV, and claims follow the GB register. Northern Ireland still applies the EU rules, so a pack sold across the UK can face two registers. The UK is not a single uniform market for labelling detail. Check the current GB register and the devolved regulations, and handle a Northern Ireland destination as an EU destination for the purpose of the file. The form, the carrier and the contaminant panel do not change; the label and the claim evidence may. ## Contaminant and micro limits Catalog contaminant limits · vitamin A 500,000 IU/g powder | Parameter | Limit | Basis | Lead (Pb) | ≤3 mg/kg | EU food supplement limit | Arsenic (As) | ≤2 mg/kg | Specification limit; no general EU supplement maximum | Cadmium (Cd) | ≤1 mg/kg | EU food supplement limit | Mercury (Hg) | ≤0.1 mg/kg | EU food supplement limit | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Catalog specification The limits are release limits for the raw material, not a finished-product exposure calculation, and do not replace the buyer's risk assessment for dose and daily intake. The batch COA confirms the result for each lot against these limits. ## The claim boundary The supplier makes no claim for the ingredient. In the EU and the UK, a vitamin A claim has to come from the permitted list, meet its conditions and be true for the finished product at the declared portion. Nutrient content claims such as “source of vitamin A” and “high vitamin A” have their own thresholds, 15% and 30% of the NRV per portion, and those are a labelling calculation, not a property of the raw material. In the US, a structure/function claim is the brand owner's statement, must be truthful and not misleading, must carry the DSHEA disclaimer, and must not cross into a disease claim. The supplier's technical documents describe composition, identity and purity only. This page does not restate any claim wording; the brand owner should take the wording from the current register and keep the evidence for the finished product. ## The document set Documents that support a vitamin A ingredient file | Document | What it should show | Certificate of analysis | Lot-specific results against the specification, with methods | Technical data sheet | Identity, IU/g, carrier, solubility, particle size and storage | Safety data sheet | Handling, transport and exposure information | Specification | The agreed limits, the IU basis and the version | Carrier and gelatin statement | Gelatin, sucrose and starch, with the gelatin source | Allergen statement | Whether the gelatin is fish-derived and any other allergen risk | GMO, vegan and origin statements | The claims the buyer intends to make, and their basis | Stability summary | The pack, the conditions and the assigned shelf life The gelatin source deserves its own line: it changes the allergen and dietary statement. Fish gelatin is an allergen in the EU and the US; porcine gelatin affects halal and kosher; bovine gelatin affects vegetarian claims. The certificate alone rarely answers this, so ask for the statement in writing. ## A file checklist - The specification names retinyl acetate, the IU/g and the method. - The certificate carries the same lot code as the pack and the retained sample. - The carrier is declared, with the gelatin source and its allergen consequence. - The IU is converted to µg RE or mcg RAE on the label basis used in the market. - The contaminant and micro results are on the certificate, with methods. - The label names the ester and lists the carriers as ingredients. - Any claim comes from the current register for the destination market. - The stability summary matches the pack and the matrix that will ship. The vitamin A product page carries the catalog specification; the COA page explains the test lines; the identity page covers the acetate proof; and the MOQ page lists the packs. Regulatory notes for the three markets sit on the EU, US and UK pages, and quality describes release. ### 06 How we prove a vitamin A lot is the acetate URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-a/identity/ Reviewed: 2026-11-19 Four kinds of evidence have to line up before a powder can be called retinyl acetate: the paper trail, the chromatogram, the fatty acid released by hydrolysis, and the mass balance. This powder is only about 17% ester, so colour and a single assay value cannot establish identity. The carrier is the rest of the evidence, and the certificate has to describe it. In one lineAt 500,000 IU/g the ester is only about 17% of the powder, so identity needs the chromatogram, the hydrolysis products and the mass balance to agree. ## The four layers of identity Four identity layers, what each one proves, and its blind spot | Layer | Evidence | What it proves | What it does not prove | Documentary | Name, CAS 127-47-9, formula C22H32O2, COA, lot code, specification | The pack and the file share a lot code | That the powder is the named ester | Chromatographic | Retention time against a retinyl acetate standard, co-injection, diode-array spectrum | The peak matches the acetate standard | The carrier, the IU/g or the ester mass | Hydrolytic | Saponification, then identification of the fatty acid by GC | The ester carries acetate, not palmitate | The IU/g or the carrier proportion | Mass balance | IU/g converted to µg RE/g, compared with the ester mass and the carrier | The dilution matches the declared grade | Which ester the molecule is The HPLC should run a retinyl acetate standard on the same column and mobile phase, co-inject the sample, and compare the diode-array spectrum around 325 nm. A retention time without the standard and the wavelength is a number, not an identification. Paper can be truthful and still describe another lot. A single peak can be the wrong ester if the standard was wrong. A correct acetate peak can sit in a powder whose carrier is not the one declared. The four layers have to agree; any one of them on its own is not identity. ## The IU-to-mass ratio as a check The IU is a unit of activity, not a mass. One microgram of retinol is defined as 3.33 IU, so 500,000 IU/g is 150,000 µg of retinol equivalent per gram, or 150 mg/g. Pure retinyl acetate is about 2.9 million IU/g, which means the 500,000 IU/g grade contains about 17% ester by mass. The rest is the gelatin, sucrose and starch matrix, moisture and minor solids. That ratio is a useful identity check because the two common esters sit at different masses for the same IU figure. At 500,000 IU/g, retinyl acetate is about 17% of the powder, while retinyl palmitate would be about 27%. If a lot is declared as the acetate but the mass balance points to the palmitate range, the discrepancy needs an explanation before the lot is accepted. The check does not replace the chromatogram or the hydrolysis test; it tells the reviewer where to look. The figures need a common basis. With loss on drying allowed up to 5.0%, a dried-basis assay reads higher than the as-sold figure. Compare the IU/g, the moisture and the ester mass on one basis, or the ratio will drift for a reason that has nothing to do with identity. ## Why a diffraction scan is not the test here X-ray diffraction is the identity workhorse for crystalline mineral chelates, where the lattice gives a fingerprint. It is the wrong tool for this powder. The spray-dried matrix is largely amorphous, and the vitamin at roughly 17% may not produce a useful pattern; crystalline sucrose or starch can dominate the scan and tell the reviewer about the carrier rather than the ester. A clean diffractogram would not prove retinyl acetate, and a noisy one would not disprove it. Diffraction still has a place as a screen for crystalline adulterants or as a check on the carrier, but it belongs beside the chromatographic and hydrolytic evidence, not in place of them. The identity tests that matter for this product are the HPLC retention time against a matching standard and the fatty acid released on hydrolysis. ## What substitution looks like Common substitutions and the tests that expose them | Substitution | What it changes | How to detect it | The wrong ester (palmitate for acetate) | Higher mass per IU, different label name | HPLC against both standards; hydrolysis and GC of the fatty acid | Beta-carotene | Different molecule and chromophore; no retinol on hydrolysis | HPLC with diode-array detection at the carotene wavelength; hydrolysis | Low potency or carrier dilution | IU/g below the declared grade | Assay plus mass balance against the ester and carrier | Free retinol or cis isomers | Oxidation marker; cis forms have lower activity | Chromatographic profile, retinol peak, stability data | Carrier substitution | Allergen, label and flow behaviour change | Carrier declaration, protein and carbohydrate tests, flow trial Beta-carotene is the substitution that a single-wavelength assay misses most easily, because its absorption sits away from the retinoid maximum. A method that looks only at the retinoid wavelength can miss it entirely. The certificate should name the wavelength and the standard, and an identity screen should cover the carotene region as well. ## Writing a specification that can be proved A line that says “vitamin A ≥500,000 IU/g” is a potency target, not an identity specification. A usable line names retinyl acetate and its CAS, states the IU/g and the HPLC method, states whether the result is as sold or on the dried basis, names the carrier and the gelatin source, and adds loss on drying, mesh, heavy metals and micro. If an antioxidant is present, it belongs in the line too. The specification should also state the overage policy and the acceptance tolerance, because those decide whether a lot above the floor is released as compliant. The batch COA confirms the lot against that version; a certificate issued against an older version is a different document. Keep the version number on the certificate and in the purchase order. ## Five questions for the supplier - Which ester is this lot, and which reference standard was used for the HPLC identity? - Was the sample saponified before the assay, and what fatty acid did the hydrolysis release? - What are the carrier proportions and the gelatin source, and is the gelatin fish, bovine or porcine? - On which IU basis was this lot released, with what overage policy and against which specification version? - Can you send the chromatogram, the hydrolysis data and a retained sample with the same lot code? Check the five answers against the certificate, the pack label and the retained sample. The vitamin A product page carries the catalog specification; the COA page explains the assay lines; the acetate versus palmitate page compares the two esters; and the compliance page lists the file. The HPLC method note and the ICP-MS method note describe the instruments, and the quality page covers release and retention. ### 02.1 Retinyl acetate vs palmitate: potency, stability and the label URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-a/grades/acetate-vs-palmitate/ Reviewed: 2026-11-19 Retinyl acetate and retinyl palmitate both deliver retinol after hydrolysis and are declared against the same IU-to-retinol convention, but they differ in mass, IU density and behaviour in oil and powder. The acetate gives more IU per gram; the palmitate is more lipophilic. The label has to name the ester actually used, and a switch is a formula change, not a unit conversion. In one lineThe two esters deliver the same vitamin A per IU but not per gram, so the choice turns on potency density, stability in the matrix and the name on the label. ## Two esters, one retinol Retinyl acetate and retinyl palmitate · molecular comparison | Property | Retinyl acetate | Retinyl palmitate | CAS | 127-47-9 | 79-81-2 | Formula | C22H32O2 | C36H60O2 | Molecular mass | 328.49 g/mol | 524.86 g/mol | Fatty acid released on hydrolysis | Acetic acid, two carbons | Palmitic acid, sixteen carbons | Retinol share of the pure ester | 87.2% by mass | 54.6% by mass | Physical character | Crystalline solid | Oil or waxy solid Both are esters of the same retinol with different fatty acids. That shared retinol is why the label arithmetic is the same: after hydrolysis, the vitamin A activity is counted as retinol. The fatty acid is why the materials are not interchangeable: it changes the mass, the melting behaviour, the oil solubility and the ester needed for a given IU figure. ## Potency per gram, and what it does to the formula The IU is defined through retinol: one microgram of retinol is 3.33 IU. Because the acetate carries more retinol per gram, pure retinyl acetate is about 2.9 million IU/g and pure palmitate about 1.8 million IU/g. For the same IU figure, a palmitate powder needs about 1.6 times the ester mass of an acetate powder. At 500,000 IU/g, the acetate grade is roughly 17% ester and the palmitate grade roughly 27% ester. The rest is carrier, moisture and minor solids. That difference shows up in the fill weight, the carrier load and the space the vitamin takes in a tablet or capsule. It also shows up in the label: the two products can both declare 500,000 IU/g and still contain different masses of vitamin A ester. The conversion is not a way to swap one ester for the other at the same weight; it compares them on the activity axis. A formulator who changes ester must recalculate the powder weight per portion, then re-check carrier load and overage. ## Stability in powder and in oil Both esters are sensitive to light, heat and oxygen; the difference is how the matrix exposes them. The acetate is a crystalline solid that can be spray-dried into a free-flowing powder, where the carrier limits mobility and oxygen contact. The palmitate is an oil or a wax, so it is more often used in an oil phase, an emulsion or a softgel, where the carrier oil, the headspace and the shell become part of the stability system. Hydrolysis is the shared route: water and acid split the ester into retinol and the fatty acid, and free retinol is more exposed to oxidation than the ester. The rate depends on the matrix, pH and temperature, not only on the ester. A palmitate in an acidic beverage is not automatically more stable than an acetate there, and an acetate in a dry powder is not automatically more stable than a palmitate in oil. The stability file has to be built for the finished matrix. Light protection is common to both: an opaque pack, softgel shell and carton are part of the formulation, not decoration. Antioxidants, if used, must be declared and tested; the ester name does not say whether one is present. ## Matching the ester to the dosage form Dosage forms and the ester that usually suits them | Dosage form | Usual ester | Why | Tablet or capsule, dry blend | Acetate powder | Free-flowing, sieved, easy to blend and to declare | Softgel | Palmitate, or acetate in oil | Oil solubility and a simple oil fill | Oil or drops | Palmitate, or acetate | Solubility in the carrier oil; label name follows the ester | Emulsion, gummy or beverage | Either, as a dispersion | The matrix and the process decide; stability data is required | Dry stick pack | Acetate powder | Dispersion in warm water and a low-moisture matrix The table is a starting point, not a rule: a softgel can use an acetate if the oil and shell suit it, and a tablet can use a palmitate powder if the carrier and compression data support it. What does not change is the need to test the ester in the matrix. ## What the label has to say In the EU and the UK, the ingredient list names the ester, “retinyl acetate” or “retinyl palmitate”, and vitamin A is declared in µg RE against the 800 µg NRV. US labels put vitamin A in mcg RAE on the Supplement Facts panel, with a 900 mcg Daily Value and the source in parentheses, for example “Vitamin A (as retinyl acetate)”. A label that says only “vitamin A” does not tell the buyer which ester was used, and it does not match a certificate that names one. Both are accepted sources of vitamin A in these markets; the label still has to name the one used. The carrier is a label fact as well. Gelatin, sucrose and starch appear in the ingredient list, and the gelatin source can trigger an allergen statement if it is fish-derived. Sucrose is a sugar, which matters for a “no added sugar” claim, and a starch source can matter for a gluten statement. A switch of ester often comes with a switch of carrier, so the label review has to cover both. The IU and the RE or RAE are not competing claims; they are two expressions of the same vitamin A content. The label should use the unit the market requires and keep the conversion consistent with the assay. An IU figure copied from a certificate onto a label without the conversion is an unfinished label. ## When to choose which Choose the acetate when the dosage form is a dry blend, when a high IU density keeps the dose weight small, when the 500,000 IU/g powder with gelatin, sucrose and starch fits the label, and when the analytical method and the certificate already name the acetate. Choose the palmitate when the formula is an oil, an emulsion or a softgel and the oil solubility is the deciding property, or when the label and the customer specification already call for it. Do not choose on the IU figure alone. Either ester can reach the same figure at a different dilution, and the label, the carrier and the stability file will differ. A switch should start with five documents: the new certificate, chromatogram, hydrolysis data, carrier declaration and matrix-specific stability summary. The vitamin A product page carries the specification; the grade page sets out the grade comparison; the identity page explains the acetate proof; and the stability page covers the storage variables. The assay glossary entry defines the basis. ### 01 What the COA for vitamin B12 1% powder actually contains URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-b12/coa/ Reviewed: 2026-11-19 The certificate for a cyanocobalamin 1% spray-dried lot reports appearance, vitamin B12 by HPLC, UV identification at 361 ± 1 nm and 550 ± 2 nm, loss on drying, the carrier, particle size, heavy metals and microbiology, each line with its method and release limit. The values below define the catalog grade; a particular pack is confirmed by its own batch COA. The ≥1.0% figure is a content per gram of powder, not a purity of the molecule, so the carrier and the moisture are part of the reading. In one lineThe ≥1.0% line is grams of cyanocobalamin per hundred grams of spray-dried powder, so the carrier, the moisture and the HPLC basis belong to the assay, not to a footnote. ## The certificate as an auditable report An auditable certificate has a fixed shape: parameter, method, release limit, and on the batch document the result. For a 1% dilution that shape matters — most of the powder is carrier and water. Identity, content and physical limits · cyanocobalamin 1% spray-dried powder | Parameter | Method | Release limit | Appearance | Visual | Pale red to pink, fine, free-flowing powder | Identification | UV-Vis in water, 361 ± 1 nm and 550 ± 2 nm | Both maxima present | Vitamin B12 | HPLC, external standard | ≥1.0%, basis stated | Carrier | Supplier declaration; FTIR or iodine check on request | Starch or maltodextrin | Loss on drying | Gravimetric | ≤12.0% | Particle size | Sieve analysis | ≥95% through 80 mesh Heavy-metal and microbiological limits | Parameter | Method | Release limit | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent The ultraviolet line is an identity test, not an assay. The two bands come from the corrin ring and the cobalt coordination; a scan that shows one without the other has not identified cyanocobalamin. ## What the 1.0% figure measures One gram of a 1% powder contains about 10 mg of cyanocobalamin, or 10,000 µg of vitamin B12. A 100 µg label claim draws 10 mg of powder; a 2.4 µg claim draws 0.24 mg. The second mass is too small to weigh repeatedly, which is why the dilution exists. HPLC separates cyanocobalamin from the carrier and from other corrinoids, and the result is calculated against a cyanocobalamin reference at the 361 nm maximum. Two details change the number and belong in print: the column and mobile phase behind the peak, and whether the percentage is calculated on the powder as sold or on the dried solids. The distinction matters: 1.0% on dried solids is not the same result as 1.0% on the powder as sold. At the 12.0% loss-on-drying ceiling, 1.0% on dried solids equals 0.88% as sold — a 12% gap between two certificates that both look compliant. The carrier is the third part of the reading. Starch and maltodextrin differ in water uptake, bulk density and flow, so the certificate should name which one the lot used: the answer changes the label, the tablet weight and the moisture the pack must hold back. ## The limit, the result and the gap The release limit is the gate the lot passed; the batch result is what the laboratory measured. They belong in separate columns, with the method and basis beside them. A result column that repeats the acceptance range has not measured anything; it restates the gate and says nothing about the pack on the loading dock. “Conforms” is the weak line on many certificates. For UV identity it is a conclusion, not a result: the document should state the two maxima and, usefully, their absorbance ratio. Moisture is the reverse case, a number with a wide window, and a lot at 11.8% has passed while leaving almost no room for a humid filling room. Read assay and loss on drying as a pair — 1.02% at 6% moisture and 1.02% at 11.5% describe two different powders, even though both clear the ≥1.0% line. Uniformity is not on this certificate. The drum assay describes the drum, not what happens when 10 mg of it meets a 500 mg capsule fill. That is a finished-product test, and a supplier who offers only the drum figure has answered a narrower question than the formulator asked. ## What changes from lot to lot Spray drying sets content and physical form together. Feed concentration and pump rate control how much cyanocobalamin arrives per droplet; inlet and outlet temperature control moisture and particle shape; the atomiser and sieve control what passes 80 mesh. A change in any of them appears on the certificate as a move in assay, loss on drying or particle size. The carrier lot is the quiet variable. Switching to a maltodextrin with a different dextrose equivalent changes water uptake and bulk density without moving the vitamin, and switching from starch to maltodextrin changes the ingredient list. Both are legitimate; neither should arrive without the specification and the label being updated. Colour is the least quantitative signal and the most over-read. A pale pink powder fading towards tan has probably seen light or heat, and a grey cast may mean trace iron from the dryer. Neither observation replaces the assay, but a shift across consecutive lots deserves a question about drying and packing. ## When to send a sample out An independent laboratory is the right check on a new supplier, a first import into a regulated market, or a disputed assay. The panel should target the question: HPLC with a diode-array detector for retention time and peak purity, a UV scan of a freshly prepared solution for both maxima and their ratio, cobalt by ICP-MS, a dye screen, and carrier identity by FTIR or the iodine test for starch. Cobalt is the simplest cross-check. Cyanocobalamin is about 4.35% cobalt by mass, so a 1.00% powder should carry roughly 435 mg/kg. A cobalt result far below that says the assay is overstated or the reference is wrong; a result far above it points to a cobalt-bearing contaminant or a carrier blank that was not subtracted. Ask for the detection limit on any “not detected” line, and keep chain of custody: the sample tested should be the retained sample, its lot code matching certificate and pouch. ## Comparing two suppliers line by line Line up six points: form and CAS number; assay with method and basis; carrier identity and ratio; loss on drying; the two UV maxima and their ratio; and the pack's light barrier. Two offers that agree on assay but diverge on carrier, basis or pack are not the same material, even when both are called vitamin B12 1%. Then there is traceability. The lot code should appear on certificate, pouch and retained sample, and the certificate should name the manufacturing site and the carrier supplier. The catalog specification sits on the vitamin B12 product page. The dilution arithmetic is on the grade page, the identity tests on the identity page, and the release workflow on the quality page. The separation is described in the HPLC method note, and the term is defined in the COA entry. ### 02 Cyanocobalamin 1% or 0.1%: choosing a B12 grade URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-b12/grades/ Reviewed: 2026-11-19 The grade follows the label dose and the fill weight. A 1% cyanocobalamin powder carries 10 mg of vitamin B12 per gram, so a 100 µg claim takes 10 mg of powder and a 2.4 µg claim takes 0.24 mg; a 0.1% grade carries 1 mg per gram and multiplies both masses by ten. The carrier changes the mass and the flow, not the molecule, so the switch is a formulation and labelling decision rather than a potency upgrade. In one lineThe microgram dose and the milligram fill choose the grade; the percentage on the drum only sets how much carrier enters the capsule. ## Why a dilution is the starting point Cyanocobalamin is dosed in micrograms. At 2.4 µg a portion, the pure crystal would be a fraction of a milligram, which is neither weighable at production speed nor dispersible through a tonne of blend. The dilution answers the handling problem: the vitamin is fixed onto a food-grade carrier at a known ratio, so the operator weighs a visible mass and the mixer receives a powder it can distribute. The 1% grade is the catalog default and the 0.1% grade is supplied on request. Both are spray-dried powders on starch or maltodextrin; neither is the crystalline vitamin. That distinction matters on the label and in the purchase specification, because “cyanocobalamin” describes the molecule and “1%” describes the mixture. ## 1%, 0.1% and granulated Cyanocobalamin grades and the mass needed for three label claims | Grade | Content | Mass for 2.4 µg | Mass for 100 µg | Mass for 500 µg | 1% spray-dried, 80 mesh | 10 mg/g | 0.24 mg | 10 mg | 50 mg | 0.1% on request | 1 mg/g | 2.4 mg | 100 mg | 500 mg | Granulated on request | 1% or 0.1% base | As the base grade | As the base grade | As the base grade Put the conversion in the batch record. A 1% powder is 10,000 µg/g, so the powder mass in milligrams equals the label claim in micrograms divided by ten. A 0.1% powder is 1,000 µg/g, so the mass in milligrams equals the claim. At 1,000 µg the same arithmetic gives 100 mg of the 1% grade and 1,000 mg of the 0.1% grade, which is already a stick pack rather than a capsule. ## What the powder does in the plant The standard grade passes 80 mesh, which is about 177 µm. That fineness helps distribute a small inclusion through a blend and gives a smooth mouthfeel in a stick, but it also carries static and dust. A granulated version on the same 1% base flows better and generates less dust; it is the grade to discuss when the filling line struggles with a fine powder, not a different vitamin content. The carrier is the majority of the powder, so its behaviour is the powder's behaviour. Maltodextrin dissolves readily and suits sticks and gummies; starch gives a different bulk density and a matt dispersion. A carrier with a coarse fraction or a different moisture will segregate against other excipients even when the cyanocobalamin is evenly sprayed onto it. Colour is not a content check. A 1% powder is pale red to pink because the vitamin is intensely coloured; a 0.1% powder is only faintly pink and can look almost white. Two powders of the same shade can differ twofold in assay, so the certificate and not the eye decides the grade. ## Fitting the grade to the dosage form For a 500 mg capsule, 10 mg of the 1% grade at a 100 µg claim is 2% of the fill; 50 mg at 500 µg is 10%. Both are workable inclusions if the premix is made properly. The 0.1% grade at 500 µg fills the whole capsule, so it belongs to smaller claims or larger fills, not to a high-dose capsule. Tablets follow the same arithmetic against the tablet weight. A 100 µg claim in an 800 mg tablet is 10 mg of the 1% grade, or 1.25% of the tablet, which direct compression can handle if the blend is uniform. The 0.1% grade is the better fit when the dose is 25 µg or less and the tablet is small, because it turns a sub-milligram inclusion into one the feeder can control. Powder sticks are where the 0.1% grade earns its place. At 2.4 µg in a 5 g stick, the 1% grade is 0.24 mg, or 48 mg per kilogram of finished powder; the 0.1% grade is 2.4 mg, or 480 mg per kilogram, a far easier target for a ribbon blender. Gummies and chews need the carrier checked against the cook: maltodextrin and starch behave differently in a hot, acidic mass, and the grade has to be chosen with the process in view. ## What the switch changes The content specification changes first. A 1% grade is released at ≥1.0% by HPLC, and a 0.1% grade needs its own limit in mg/g rather than a percentage borrowed from the stronger grade. The loss-on-drying window may also need review: at 0.1% the carrier is a larger share of the powder, so the same ≤12.0% ceiling describes more water per gram of vitamin. Heavy-metal limits are written on the powder, not on the vitamin. The same absolute metal load in the cyanocobalamin is diluted tenfold in the 0.1% grade, so a supplier may meet a tighter customer limit by moving to the weaker grade without improving the vitamin at all. That is a legitimate use of the specification and a reason to compare results per gram of vitamin as well as per gram of powder. The label changes with the grade. The nutrition declaration states vitamin B12 in micrograms and as a percentage of the reference value — 2.5 µg in the EU and 2.4 µg in the US — never the weight of the dilution. The carrier is listed among the ingredients, and a switch from starch to maltodextrin is an ingredient change even though the nutrient figure is identical. The grade has to be visible in three documents — purchase specification, certificate and technical data sheet — so an auditor can trace it. ## When the grade is the wrong answer No grade fixes a blend that cannot be mixed. If a 2.4 µg claim goes into a 100 mg capsule, the 0.1% grade supplies 2.4 mg of the fill and the uniformity question stays at the capsule filler; a larger fill or a premix step is the real solution. Conversely, a 1,000 µg claim cannot use the 0.1% grade in a capsule, because the powder mass would be the whole fill. Granulation is a flow decision, not a content decision. It helps when dust, static or segregation is the complaint, and it changes the particle-size specification and the sampling plan. The catalog options are on the vitamin B12 product page; the COA page shows the certificate lines, the stability page covers light and moisture, and the MOQ page lists the packs. The reference values are defined in the NRV entry and the daily-value entry. ### 03 Vitamin B12 is light-sensitive; the carrier and the pack decide the shelf life URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-b12/stability/ Reviewed: 2026-11-19 Cyanocobalamin absorbs visible light at 361 nm and 550 nm, the same bands used to identify it, and the absorbed light cleaves the bond between cobalt and the cyano group. The solid 1% spray-dried powder is far more robust than a solution, but it still fades in a clear bag, and the starch or maltodextrin carrier holds enough water to cake and to speed the loss. In one lineThe molecule is photolabile and the carrier is hygroscopic, so an opaque sealed pack and a controlled moisture pick-up decide more of the shelf life than the release assay does. ## The powder in the dark In the solid state, cyanocobalamin is stable enough that most of the loss over a normal shelf life comes from light exposure and moisture rather than from temperature alone. The spray-dried matrix helps: the carrier disperses the vitamin, reduces its exposed surface and buffers the powder against small humidity swings. It also means the powder always contains water — the catalog limit allows up to 12.0% loss on drying — and that water is the medium in which the slower reactions proceed. Maltodextrin and starch behave differently here. Maltodextrin is hygroscopic and its glass transition falls as moisture rises, so a pouch left open in a humid room can move from free-flowing powder to a sticky cake. Starch holds water more tightly and cakes at a different moisture, sometimes without the same warning. Temperature matters mostly through water activity. A sealed pouch at 25 °C is a different system from the same pouch at 35 °C, and the finished-product process adds its own heat: spray drying, tabletting and a gummy cook all put the vitamin in contact with warm, moist material. ## The solution is the fragile form Dissolved cyanocobalamin is markedly less stable than the powder. In water, light converts it to hydroxocobalamin and then to other corrinoids, and the red colour fades as the 361 nm and 550 nm bands change shape. A drink mix that is dry in the pack is a solid-state problem; the same mix made up in a glass is a solution problem, and the label's in-use instruction decides how long the solution exists. pH is the second variable. Cyanocobalamin is most stable near neutral; strongly acidic or alkaline solutions increase the rate of loss, and the acid in a fruit-flavoured drink or a gummy is enough to matter over a shelf life. Reducing agents make it worse: ascorbic acid in the same premix, or a trace of iron or copper, can move the corrinoid even in the dark. For a liquid or gel product, the pack and the pH belong in the specification beside the assay: an opaque bottle, a pH window and an in-use period are the design variables. For a dry product, the same variables appear as moisture, light barrier and seal integrity. ## What actually moves the result Stability factors for cyanocobalamin 1% powder and the control for each | Factor | Effect | Control | Visible and UV light | Cleaves the cobalt–cyano bond; pink fades to tan | Opaque foil pouch, opaque finished pack, limited exposure time | Heat | Raises reaction rate, mostly through water activity | Dryer temperature limits, cooling before packing | Moisture | Carrier uptake, caking and faster loss; LOD ≤12.0% | Sealed pack, moisture barrier, LOD on the COA | Oxygen | Secondary in the solid, significant in solution | Nitrogen flush where the pack allows | Iron and copper | Catalyse degradation at trace levels | ICP-MS limits, stainless contact, carrier blank | Reducing agents | Ascorbic acid and similar compounds shift the corrinoid | Segregate in the premix or validate an overage | Processing | Shear, heat and water in gummies and tablets | Process validation and in-process assay ## A stability protocol for this powder A protocol that answers the buyer's question is built on the pack, not on the molecule alone. Put the 1 kg foil pouch and the 25 kg drum into the study as separate pack variants, and add an opened-pouch sample if the customer will hold material after first use. Store the control in the dark at the same temperature, because the gap between control and exposed sample is the photostability result. Storage conditions and timepoints for a 1% powder | Condition | Temperature and humidity | Timepoints | Long term | 25 °C / 60% RH | 0, 3, 6, 12, 18, 24, 36 months | Intermediate | 30 °C / 65% RH | 0, 6, 9, 12 months | Accelerated | 40 °C / 75% RH | 0, 1, 2, 3, 6 months | Photostability | ICH Q1B option 2: 1.2 million lux hours visible and 200 W·h/m² near UV | 0 and end of exposure Test at each point for assay by HPLC, loss on drying, appearance, UV identity and microbiology. Add dose uniformity on the finished product, because the drum assay can hold while the capsule fill drifts. A pass at 40 °C for six months is an accelerated signal, not a shelf life on its own; extrapolation outside the ICH framework needs justification. ## The formula and the process In a premix the cyanocobalamin is a minor component surrounded by other actives. Ascorbic acid, iron salts and any reducing agent are the usual neighbours to worry about, and the answer is either separation or an overage validated by a premix stability study. A maltodextrin with a high dextrose equivalent is more hygroscopic than a low-DE grade, and a starch carrier binds water that would otherwise reach the vitamin. Processing exposure is often larger than storage exposure. A gummy cooks at acidic pH and high water activity, a tablet is compressed under heat and pressure, and a stick pack is filled where the powder is open to light. Each step belongs in the protocol as a sample point, not an assumption. The specification should state the pack, the storage condition and any in-use limit, because an assay limit without them describes a powder that may never exist in the customer's warehouse. ## How the shelf life is set A shelf life is assigned from data on the actual pack, not from a general statement about the vitamin. The catalog does not publish a fixed shelf-life figure for this grade; the value is agreed in the specification and supported by the study above, and the batch COA confirms release rather than the end of the period. If the finished product must carry the full label claim at the end of its own shelf life, the release target has to sit above the 1.0% minimum, and the size of that margin comes from the data. Two practical terms belong in the commercial document: the minimum remaining shelf life at delivery, and the period allowed after a pouch is opened. Both are agreed rather than assumed, and both depend on the pack. Store the powder closed, dry and away from light; a clear secondary container on a sunny shelf undoes the foil pouch. The catalog specification is on the vitamin B12 product page. The COA page covers the certificate, the grade page the dilution options, and the MOQ page the packs. The moisture term is defined in the loss-on-drying entry, and the release workflow is described on the quality page. ### 04 Vitamin B12: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-b12/moq/ Reviewed: 2026-11-19 The minimum order for cyanocobalamin 1% spray-dried powder is 1 kg, supplied as a 1 kg foil pouch drawn from a released lot, with a 25 kg fiber drum for larger quantities. The standard grade ships in 1–7 days; the 0.1% and granulated versions are supplied on request, and the date is confirmed with the quotation. One kilogram is not only a commercial floor: it is enough material for a trial batch, a uniformity check and a retained sample, and small enough to come from a single lot. In one lineOne kilogram is the qualification unit: enough for a trial batch, a uniformity check and a retained sample, and small enough to come from a single released lot. ## Why the floor is 1 kg At 1% and a 100 µg label claim, one kilogram of powder carries 10 g of cyanocobalamin and covers 100,000 portions. The same kilogram covers about 20,000 portions at 500 µg, 10,000 at 1,000 µg, and over four million at 2.4 µg. The quantity is therefore a pilot-scale unit for most formulas, not a token sample, and it is the smallest pack that still lets a customer run a real batch and keep a reserve. There is a second reason. A 1 kg pouch can be filled from one released lot, so the trial, the retained sample and the first production run can share a lot code. Traceability is the point: if a customer qualifies a grade on a sample from lot A and buys production from lot B, the qualification covers a different powder. The minimum is sized to keep those three uses on one certificate. Above 1 kg, the 25 kg drum is the production pack. Twenty-five kilograms is the natural multiple for a factory that consumes the powder weekly, and it reduces the number of lot changes and the amount of packaging handled in the dispensary. The two pack sizes are not interchangeable in a stability file: each has its own headspace, liner and opening history. ## Packs and what they protect The 1 kg pouch is a foil laminate, heat-sealed, and the foil is the light barrier as well as the moisture barrier for a photolabile powder. The 25 kg fiber drum carries an inner liner; the liner is the primary barrier and the drum is the handling unit. Neither pack is decorative: a clear bag inside a drum, or a pouch left open between weighings, defeats the protection the specification assumes. The pack label should carry the product name with the form and dilution, the lot code, the net weight, the carrier, the storage condition and the date of manufacture. The lot code must match the certificate and the retained sample; a repacked pouch without a lot code is no longer traceable to the release. For a customer who repacks into single-use sachets, the repacking room's light and humidity belong in the process risk assessment. ## Lead time and what sets it The standard 1% grade, 80 mesh, ships in 1–7 days. The 0.1% dilution and the granulated grade are supplied on request, so the date depends on the spray-drying or granulation schedule and is confirmed with the quotation rather than assumed from the standard-grade figure. Neither date includes transit, customs clearance or the customer's own incoming inspection. Documents travel with the lot, not after it. The COA, technical data sheet and safety data sheet should be issued with the shipment, and any additional statement — allergen, non-GMO, halal or kosher — should be requested early enough to be prepared with the same lot. A shipment that arrives without its certificate is a shipment that cannot be released by the customer's quality team. ## Six details a quotation needs A quotation is only comparable when it is built on the same six inputs. Ask for all six in the first message; a reply that quotes a figure without them is quoting a different product. The six details that change a cyanocobalamin quotation | Detail | Why it matters | Grade and form | 1% standard, 0.1% on request or granulated; each has its own content, carrier and pack | Quantity and pack mix | 1 kg pouches or 25 kg drums, and how the total is split between them | Destination and Incoterm | Sets the documents, the freight mode and the point at which risk passes | Document set | COA, TDS, SDS, allergen, non-GMO, halal or kosher, and any customer-specific statement | Additional tests | Carrier identity, cobalt by ICP-MS, dye screen, uniformity or a customer method | Market and label | EU, US or UK supply, pack marking and any label text the customer applies ## Samples and qualification A sample is drawn from a released lot and ships with that lot's certificate. The useful sample size covers the assay, the identity scan and a small trial, and the exact quantity is agreed per request rather than fixed on the page. What matters is the link: the sample's lot code should be the lot code quoted for the order. Qualification usually runs in three steps — document review, a laboratory check on the sample, and a trial batch. The laboratory check should include the HPLC assay, the UV maxima at 361 nm and 550 nm, loss on drying and the carrier identity, because those are the lines that separate one supplier's 1% powder from another's. A sample without a lot code is a data point, not a qualification. ## Terms worth fixing before the first order Five commercial terms decide whether a repeat order runs smoothly: the Incoterm and named place, the payment term, the validity of the quotation, the quantity tolerance on the pack, and the minimum remaining shelf life at delivery. The last one is easy to overlook and hard to fix later, because a lot released months earlier can still be within its retest period while leaving the customer too little time to use it. Add the non-conformance route: who pays for a repeat test, what happens to a lot that fails the customer's incoming assay, and how a retained sample is used in the discussion. Those clauses belong in the supply agreement, not in an email after the shipment. The packing list, certificate and label should all carry the same lot code and net weight. The catalog specification is on the vitamin B12 product page. The COA page shows the certificate, the stability page covers the pack and light, and the grade page sets out the dilutions. The commercial terms are defined in the MOQ entry and the lead-time entry. ### 05 Where vitamin B12 is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-b12/compliance/ Reviewed: 2026-11-19 Cyanocobalamin is a permitted vitamin B12 form for food supplements in the EU and the UK, and a dietary ingredient in the US, but permission is only the first of four checks. The form, the contaminant ceiling, the label declaration and the claim are separate questions answered by separate instruments, and the 1% powder adds a carrier that must be food-grade and declared. This page describes the file a brand needs; it makes no disease-related claim. In one linePermission to use cyanocobalamin, the contaminant ceiling, the carrier declaration and the claim are four separate checks, and each market answers them in its own instrument. ## Four checks, four instruments The four checks are whether the form may be used, whether the material meets the contaminant and micro limits of the finished product, whether the label states the nutrient, amount and carrier correctly, and whether any claim is authorised and substantiated. A supplier's certificate answers the second check and part of the third. It does not answer the first or the fourth, and a brand that reads a COA as a regulatory file finds the gap at the label review. The 1% powder is an ingredient, so permission attaches to the form while labelling attaches to the finished supplement. ## European Union Directive 2002/46/EC lists the vitamins and minerals that may be used in food supplements and, in Annex II, the permitted forms. As of this review, vitamin B12 appears with cyanocobalamin and hydroxocobalamin; the 1% spray-dried powder is a preparation of the cyanocobalamin entry, with starch or maltodextrin as the carrier. Methylcobalamin is not on that list, which is a separate question examined on the cyano versus methyl page. Labelling follows Regulation (EU) No 1169/2011: a nutrition declaration per portion, with per-100 g figures alongside, the vitamin B12 amount in µg and as a percentage of the nutrient reference value, and an ingredient list. The EU reference value for vitamin B12 is 2.5 µg, so a 100 µg portion declares 4,000% of the NRV. The carrier is an ingredient and must appear in that list; it is not an additive and does not need an E number. Contaminants are governed by Commission Regulation (EU) 2023/915, which replaced the older regulation in 2023. Maximum levels for vitamins in supplements are not harmonised, so the national position belongs in the file. Check the consolidated text as of the label review; it is amended regularly. ## United States Cyanocobalamin is a dietary ingredient under the Dietary Supplement Health and Education Act, and a supplement containing it is made under the cGMP rule at 21 CFR 111. The Supplement Facts panel declares vitamin B12 in µg and as a percentage of the Daily Value, which is 2.4 µg for adults and children four years and older; the ingredient list names cyanocobalamin. The US does not set a general heavy-metal limit for dietary supplements. The practical ceilings come from the customer specification, state law — California's Proposition 65 sets a maximum allowable dose level of 0.5 µg/day for lead — and the finished product's risk assessment. Structure/function claims are permitted with the DSHEA disclaimer and must be substantiated; disease claims require a different route. The raw-material data sheet carries no claim, and this page reproduces none. ## Contaminant limits against the catalog Heavy metals: EU food supplement ceilings and the catalog specification | Parameter | EU ceiling for food supplements | Catalog specification | Note | Lead (Pb) | 3.0 mg/kg | ≤3 mg/kg | At the ceiling; the finished product needs headroom | Cadmium (Cd) | 1.0 mg/kg | ≤1 mg/kg | At the ceiling; seaweed-based supplements have a higher limit | Mercury (Hg) | 0.1 mg/kg | ≤0.1 mg/kg | At the ceiling | Arsenic (As) | No general EU ceiling | ≤2 mg/kg | A specification limit, not an EU limit | Microbiology | Food safety obligation | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Released against the specification The ceilings apply to the food as sold, not to the drum. At a 1% inclusion the powder is a small fraction of the tablet, so material at 3.0 mg/kg can still be compliant in the product — or fail once the rest of the formula is added. The purchasing specification sits at or below the ceiling, and the finished-product calculation decides the margin. ## Where the claim boundary sits In the EU and the UK, health claims must come from the authorised list, using the authorised wording and conditions of use. The EU Register and the GB register are the references; a claim that is not on the register cannot be carried by the label. A general statement about the nutrient still needs a specific authorised claim behind it. In the US, a structure/function claim needs the disclaimer and substantiation. The three regimes converge on one rule: the material is sold on specification and method, and the claim belongs to the finished product. This page reproduces no claim wording and makes no disease-related claim. The dilution carries its own labelling trap: the label declares the nutrient in µg, not the dilution weight, and the ingredient list shows the carrier. Calling a 1% preparation “pure vitamin B12” is inaccurate. ## The file a brand should hold Documents that travel with a cyanocobalamin 1% lot | Document | What it shows | When it is needed | Batch COA | Results against the specification, with methods | Every shipment | Technical data sheet | Catalog specification, carrier, pack, storage | First order and technical review | Safety data sheet | Handling, dust and disposal information | Every shipment and for EHS | Agreed specification | Customer limits, methods and basis | Before the first order | Allergen statement | Carrier and processing allergens | Label review | Non-GMO statement | Source and process position | Market or customer requirement | Halal or kosher certificate | Certification scope and site | Only where a claim is made | Stability and retest data | Pack, conditions and supported period | Quality agreement The manufacturer, site and country of origin belong in the same file, and the lot code links every document to the pack. ## Release checklist Checks before a B12 supplement is released in the EU, US or UK | Check | What passes | Form | The label names cyanocobalamin, and the EU file cites the Annex II entry | Carrier | Starch or maltodextrin named on the COA, food-grade, and in the ingredient list | Contaminants | Raw-material results plus the rest of the formula stay under the finished-product limit | Nutrition declaration | µg per portion and per 100 g, with the correct NRV or Daily Value | Claim | Wording taken from the current register, or no claim at all | Traceability | Lot code on COA, pack, retained sample and shipping documents | Market version | EU, GB and Northern Ireland labelling checked separately | Currency | The regulation text and the register checked as of the review date The UK applies retained Regulation 1169/2011 and its own supplements regulations, and Northern Ireland follows the EU regime under the Windsor Framework, so one label rarely serves all three. The regulatory summaries are on the EU page, the US page and the UK page; the Annex II term is defined in the glossary. The product specification is on the vitamin B12 product page, the COA page shows the certificate, and the identity page the tests. ### 06 How we prove a B12 lot is cyanocobalamin URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-b12/identity/ Reviewed: 2026-11-19 Identity for a cyanocobalamin 1% lot rests on four layers: the form and CAS number on the file, the HPLC retention time against a cyanocobalamin standard, the UV spectrum with maxima at 361 ± 1 nm and 550 ± 2 nm, and the cobalt content measured against the assay. The carrier and the dilution explain the rest; appearance proves nothing. The catalog specification is the gate; the batch COA is the evidence for a particular pack. In one lineA pink powder is not proof of cyanocobalamin: the retention time, the two UV maxima and the cobalt figure have to agree with the assay and with each other. ## Four layers of evidence What each identity test proves, and what it leaves open | Layer | Test | What it proves | What it leaves open | Document | Name, CAS 68-19-9, formula, carrier, method | What the lot is declared to be | Whether the powder matches the declaration | Chromatography | HPLC retention time and peak purity against a standard | The main peak behaves as cyanocobalamin | How much, and whether a co-eluting analogue is present | Spectroscopy | UV-Vis maxima at 361 ± 1 and 550 ± 2 nm | The corrin ring and cobalt coordination are present | Which cobalamin, and the content | Elemental | Cobalt by ICP-MS | A cobalt-bearing molecule is present at the expected level | Whether the cobalt sits in cyanocobalamin or another salt No single layer carries the conclusion: a retention time can be spiked, a UV scan can be dyed, a cobalt result can be raised by a salt. Together, read against the assay, they are hard to reproduce with anything but the named material. ## The two ratios worth recording The first is the absorbance ratio between the 361 nm and 550 nm maxima. The two bands belong to the same chromophore, so the ratio is a shape check a single-wavelength reading cannot provide. A solution with the right 361 nm absorbance but the wrong 550 nm ratio is not a clean cyanocobalamin solution; the certificate should record the ratio, not “conforms”. The second is the dilution ratio: one part cyanocobalamin to about ninety-nine parts carrier and water. One gram carries about 10 mg of the vitamin, and a 1.05% lot carries 10.5 mg. The ratio is where a content shortfall hides, because the carrier can be darkened to make the colour look right. Cobalt ties the two together. Cyanocobalamin is about 4.35% cobalt by mass, so a 1.00% powder carries roughly 435 mg/kg of cobalt, and a 1.05% lot about 457 mg/kg. If the HPLC says 1.00% and the cobalt says 300 mg/kg, one of the two results is wrong; if the cobalt is high and the assay is on target, look for a cobalt salt or a carrier blank that was not subtracted. ## What X-ray diffraction can and cannot do here X-ray diffraction identifies crystalline phases, and a 1% spray-dried powder is mostly amorphous carrier. The pattern is dominated by the starch or maltodextrin, and cyanocobalamin is far below the level at which a minor phase can be identified. An XRD report on this powder says something about the carrier, not the vitamin. It has two legitimate uses here. It can characterise the crystalline reference material used to calibrate the HPLC and the UV method, and it can distinguish a native starch carrier, which shows some crystallinity, from an amorphous maltodextrin. If a supplier offers an XRD “identity” for the 1% powder, ask which phase the report claims to see and at what detection limit; a pattern with no named phase is not an identity result. ## The routes that are worth testing for Adulteration routes for a cyanocobalamin 1% powder and the test that catches each | Route | What it looks like | Test that catches it | Another cobalamin | Similar red powder, different cobalt ligand; retention and maxima shift | HPLC retention time, UV scan, standard comparison | Low content | Assay below 1.0% while colour is maintained | HPLC assay, cobalt by ICP-MS | Dye | Pink colour from carmine, erythrosine or beet red | HPLC-DAD peak purity, dye screen, cobalt | Carrier substitution | Maltodextrin declared, starch used, or the reverse | FTIR, iodine test, carrier statement | Uneven dilution | Assay passes on the drum, capsules vary | Blend uniformity and dose uniformity The simplest route is not a different molecule but less of it. A 0.6% powder can be sold as 1% if the buyer reads only the colour and the label, and a single capsule shows nothing. That is why the assay and the cobalt result belong on the same certificate, and why the ratio belongs in mg/g as well as per cent. A different cobalamin is the harder case, because the molecule is close. Hydroxocobalamin and methylcobalamin share the corrin ring and the cobalt, and their spectra and retention times differ in ways a careful HPLC method will show. A method that reports only “vitamin B12” without naming the standard has not answered the question. ## Writing the specification so identity is checkable A specification that can be tested reads like this: cyanocobalamin (CAS 68-19-9) 1% spray-dried powder on starch or maltodextrin; vitamin B12 ≥1.0% by HPLC, basis stated; identification by UV maxima at 361 ± 1 nm and 550 ± 2 nm; cobalt by ICP-MS reported and consistent with the assay; loss on drying ≤12.0%; ≥95% through 80 mesh; heavy metals and microbiology as tabulated; carrier named on the certificate; pack opaque and sealed. Two omissions cause most disputes. The first is the assay basis: “≥1.0%” without “as sold” or “on dried solids” can be met by two powders that differ by more than a tenth of a per cent. The second is the carrier: “starch or maltodextrin” is a legitimate catalog range, but the batch certificate has to say which one the lot used, because the label and the tableting behaviour follow the carrier. The pack belongs in the same specification. An assay limit alone describes a powder in a laboratory bottle, not one in a foil pouch after a month in a warm container. The light barrier and the seal are part of the purchase specification. ## Five questions for a supplier - Is the assay calculated on the powder as sold or on dried solids, and can you send the chromatogram with the standard concentration? - What are the two UV maxima and the absorbance ratio for this lot, and was the scan run on a freshly prepared solution? - What is the cobalt result by ICP-MS, and does it agree with the assay using the 4.35% cobalt fraction? - Which carrier did this lot use, at what ratio, and is it named on the certificate and the label? - What is the pack's light barrier, and what exposure does the powder see between spray drying and filling? An answer that covers all five is a technical file. An answer that covers the assay only is a number. The COA page sets out the certificate, the grade page the arithmetic, and the compliance page the permitted-form question. The separation is described in the HPLC method note and the elemental test in the ICP-MS method note; the product specification is on the vitamin B12 product page. ### 02.1 Cyanocobalamin vs methylcobalamin: form, stability and the label URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-b12/grades/cyano-vs-methyl/ Reviewed: 2026-11-19 Cyanocobalamin and methylcobalamin share the same corrin ring and the same cobalt centre; the difference is the group attached to the cobalt, a cyano group in one and a methyl group in the other. That single substitution changes the molecular weight, the light sensitivity, the permitted-form position in the EU and the word that must appear in the ingredient list. Both are declared as vitamin B12 in micrograms, so the switch is not a potency conversion, and the catalog grade is the cyano form as a 1% spray-dried powder. In one lineThe two forms differ by the group on the cobalt, and that group decides the stability, the EU permitted-form question and the label word, not the microgram figure. ## Two cobalamins, one difference Cyanocobalamin has the formula C63H88CoN14O14P and a molecular weight of about 1,355 g/mol. Methylcobalamin replaces the cyano ligand with a methyl group, giving C63H91CoN13O14P and a molecular weight of about 1,344 g/mol. Both are red, water-soluble and handled as fine powders at supplement scale; the colour comes from the corrin ring, not from the ligand. The ligand is not decoration. The cyano group holds the cobalt in a stable configuration, which is why the cyano form is the one normally spray-dried for a 1% grade; the methyl group is more labile, and the methyl form converts more readily to hydroxocobalamin under light or in solution. ## What the microgram figure does and does not mean Both forms are declared as vitamin B12 in micrograms, and the claim is a mass of the named substance. There is no official conversion factor; the molar difference is about 0.8%, below the precision of a label claim and not applied in practice. The arithmetic that matters is the dilution. A 1% powder of either form carries 10 mg per gram, so a 100 µg claim draws 10 mg and a 2.4 µg claim draws 0.24 mg. The form changes the assay standard and the certificate name, not the mass per microgram of claim. A methyl certificate should be run against a methylcobalamin standard, not a cyanocobalamin standard with a borrowed response factor: the maxima and retention behaviour differ, and the wrong standard still produces a plausible number. ## Stability is where the forms separate The cyano form is the more stable of the two in the solid state and in solution, and that stability is the main reason it is the usual form in a 1% powder. The methyl form is more sensitive to light, and its degradation product is hydroxocobalamin, which shifts the visible spectrum and the colour. A methyl powder that has seen too much light looks different before the assay confirms it. Both forms need an opaque pack, a dry carrier and a controlled process, and both are supplied as dilutions for the same handling reason. The difference is the size of the margin: a cyano 1% powder has more room for the light exposure of a normal filling room than a methyl powder does. That margin belongs in the stability protocol and in the pack specification, not in a general statement that “B12 is light-sensitive”. In a premix the neighbours matter more than the form: ascorbic acid, iron salts and moisture move both cobalamins, and a gummy cook is harder than a capsule. The form narrows the margin; it does not remove the stability study. ## The EU list is the decisive difference Directive 2002/46/EC Annex II lists the vitamin forms permitted in food supplements in the EU, and for vitamin B12 it names cyanocobalamin and hydroxocobalamin. Cyanocobalamin therefore has a clear entry for a 1% preparation; methylcobalamin does not appear on that list. That does not make methylcobalamin a prohibited substance, but an EU food supplement cannot rely on the Annex II entry for it, and the route to market needs its own assessment. The position should be checked against the current consolidated text and against member state practice as of the review date. The UK applies retained EU law and its own supplements regulations, so the same question arises there, while Northern Ireland follows the EU regime. The US regards both as dietary ingredients, and the label names the form. A brand selling into all three markets decides whether one label serves them or the methyl version is a separate SKU. This is the point where the form question stops being technical. A form that is stable and easy to handle but absent from a permitted list is a harder commercial position than a form with a clear entry, and the reverse is true in a market that asks for methyl by name. ## What the label has to say The nutrition declaration states vitamin B12 in µg and as a percentage of the reference value — 2.5 µg in the EU and 2.4 µg in the US — and that figure does not change with the form. The ingredient list is where the form appears: “cyanocobalamin” or “methylcobalamin”, named as the substance used, not hidden behind “vitamin B12”. A product that contains both forms lists both. The dilution adds a second label obligation. A 1% powder is about ninety-nine parts carrier, so starch or maltodextrin appears in the ingredient list and the nutrient figure is calculated from the assay, not from the powder weight. Describing a 1% preparation as “pure vitamin B12” is inaccurate in any market, and describing a methyl product as cyanocobalamin — or the reverse — is a mislabelling of the ingredient. Pack copy should keep the nutrient and the form separate. “Vitamin B12” is the nutrient name in the nutrition panel; the form is an ingredient, and mixing the two is what the form name exists to prevent. ## Choosing between them Cyano and methyl compared on the points a buyer can verify | Point | Cyanocobalamin | Methylcobalamin | Cobalt ligand | Cyano | Methyl | Molecular weight | About 1,355 g/mol | About 1,344 g/mol | EU Annex II | Listed | Not listed | US status | Dietary ingredient | Dietary ingredient | Light sensitivity | Lower | Higher | Label name | Cyanocobalamin | Methylcobalamin Choose the cyano form when the product is sold in the EU or the UK, when a 1% spray-dried powder on starch or maltodextrin fits the fill, and when a longer, better-understood stability margin is worth more than a form name. Choose methyl when the customer or the market specifies it by name and the regulatory route for that market has been assessed. In both cases the dilution, the carrier and the pack are specified the same way. The comparison continues on the grade page, which works through 1% versus 0.1%; the stability argument is on the stability page, and the permitted-form file on the compliance page. The Annex II term is defined in the glossary, the EU framework on the regulatory page, and the product specification on the vitamin B12 product page. ### 01 What the COA for alkaline protease actually contains URL: https://nutrition.rainwoodbio.com/products/enzymes/alkaline-protease/coa/ Reviewed: 2026-11-19 The certificate for an alkaline protease lot reports appearance, activity in U/g, the pH of a 1% solution, loss on drying, particle size, the heavy-metal panel and microbiology. The activity row is the only line that describes the enzyme, and the figure means little unless the certificate sets the unit definition, the substrate and the pH and temperature beside it. The ranges below are the catalog specification for the ≥200,000 U/g powder from Bacillus licheniformis; the batch COA is the document that confirms one drum of alkaline protease. In one lineAn alkaline protease figure in U/g is a rate read at alkaline pH on a named protein substrate, so the certificate has to carry the unit, the substrate and the assay conditions beside the number. ## The certificate as a test report A certificate can be audited only when every row carries the parameter, the method and the limit the lot was released against. For an enzyme the activity row needs a fourth element, the assay conditions, because the same powder reads differently at pH 8 and at pH 11. Release specification · alkaline protease powder from Bacillus licheniformis | Parameter | Method | Release limit | Appearance | Visual | Off-white to light tan, free-flowing powder | Alkaline protease activity | Casein hydrolysis, Folin-Ciocalteu detection, tyrosine standard, U/g | ≥200,000 U/g | pH (1% solution) | Potentiometry | 8.0–10.0 | Loss on drying | Gravimetric | ≤8.0% | Particle size | Sieve analysis | ≥95% through 40 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤10,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent Loss on drying sets the basis of the activity figure, since water dilutes the powder without changing what the protein can do. Particle size sets the dust a 40 mesh powder still carries, and the safety data sheet has to describe it. ## What one U measures, and what sets the figure Alkaline protease activity is quoted in U/g, and the unit exists only as the assay that defines it. A common definition takes one unit as the amount of enzyme that liberates 1 µg of tyrosine equivalent per minute from casein at pH 10.0 and 40 °C, read with Folin-Ciocalteu reagent against a tyrosine standard. Other houses use haemoglobin, 37 °C, a 30-minute incubation, or micromoles instead of micrograms. Each is a legitimate scale; none converts without running both assays on the same sample. The activity row, read line by line | Element | What it has to say | Why it moves the figure | Unit | U per gram of powder as sold, with the tyrosine basis stated | µg and µmol of tyrosine differ by a factor of about 180 | Substrate | Casein, haemoglobin or a synthetic peptide | Different proteins present different cleavage sites | pH | Usually 10.0, sometimes 8.5 or 11.0 | This enzyme is built for alkaline pH; the rate falls away from its optimum | Temperature and time | 40 °C for 10 or 30 minutes, or 37 °C | The rate climbs with heat until the protein unfolds | Detection | Folin-Ciocalteu colour at about 660 nm, or a trinitrobenzene sulphonate method | Two chemistries read different products of the hydrolysis | Basis | As-is, or corrected to dry solids | Moisture moves the number at unchanged activity At ≥200,000 U/g, one kilogram carries at least 200 million units. That is a rate per gram of preparation, not a purity figure, and the protein behind it is only a fraction of the gram. Protein and specific activity are the second number, set out on the identity page. ## Release limit versus batch result Activity is a one-sided limit: a lot at 205,000 U/g and a lot at 260,000 U/g both pass ≥200,000 U/g. The result column, not the limit, tells a formulator how much headroom the powder carries into a granulation or a drying step that will consume part of it. A result column that repeats the specification is not a result, and the word “conforms” is a conclusion the reader should be able to reach from the numbers. Ask for the measured value, the method reference and the release date on the same page. Because activity falls in storage, the certificate should also state the storage condition assumed and the activity guaranteed at the end of shelf life; a drum bought six months after release is bought at the lower figure. ## What moves between batches Fermentation sets the starting point: strain, medium, induction and harvest shift how much protease the broth holds and how much of it is the alkaline enzyme. Recovery and ultrafiltration decide what reaches the concentrate, and standardisation with a carrier sets the final activity per gram. A supplier holding ≥200,000 U/g is choosing where in the concentrate to land, so the spread between lots is a process decision as much as a biological one. Moisture, pH and particle size move with drying and milling and move the activity figure with them: a wetter powder reads lower per gram at constant true activity, and a milling step that generates heat can destroy activity before the sieve is reached. The pH of a 1% solution is a useful process signal: a shift within 8.0–10.0 can follow a change in fermentation or in the standardisation salts. Colour is the least quantitative signal and often the most revealing: a darker tan can follow a hotter dry while the assay still passes. Watch the method as closely as the number: if substrate grade or assay pH changes between lots, two certificates that both say U/g describe different measurements. ## When an outside laboratory earns its fee An independent test is worth ordering for a new source, a first shipment into a regulated market, or a disputed result. The panel is narrow: activity by the buyer’s own method on a retained sample, protein, loss on drying, heavy metals by ICP-MS, microbiology, and a protein pattern by gel electrophoresis. The referee has to run the same substrate and the same pH as the specification, or the comparison measures methods rather than powder. Ask for the detection limit on each metal; a “not detected” line without a limit describes the method, not the sample. The sample tested should be the sample retained, with the lot code written on both. ## Six lines to compare between suppliers Put six lines side by side: unit definition, substrate and conditions, activity result with its method, protein and specific activity, moisture and particle size, and organism, strain and carrier. Two quotations that agree on U/g but differ on the other five are not describing the same preparation, and the gap surfaces at the first process trial. Traceability is the second layer. The lot code should match on the certificate, the pack and the retained sample, and the certificate should name the production organism and strain, because the source is part of a food enzyme’s identity. The catalog figures sit on the alkaline protease product page, the grade options are compared on the grades page, the release workflow behind the certificate is described on the quality page, and the vocabulary is in the COA glossary entry. ### 02 200,000 U/g or a dilution: choosing an alkaline protease grade URL: https://nutrition.rainwoodbio.com/products/enzymes/alkaline-protease/grades/ Reviewed: 2026-11-19 The catalog grade is a free-flowing 40 mesh powder standardised to ≥200,000 U/g, with a lower-activity dilution offered on request. A dilution is the same enzyme spread over more carrier, so the activity per gram of powder falls while the activity per kilogram of blend stays where the formulator put it. Choosing a grade is therefore choosing what one gram of powder does, how much carrier arrives with the enzyme and whether the powder can be weighed accurately at the rate the formula needs. In one lineA 200,000 U/g grade and its dilution carry the same enzyme per unit of activity; what changes is the mass you weigh, the carrier you add and the dust the line sees. ## What a grade actually fixes A grade is not a purity statement. It fixes four things at once: the activity per gram, the amount and identity of the carrier used to reach it, the particle size and flow of the powder, and the unit definition behind the number. Two powders at 200,000 U/g from different suppliers can differ on the last three, and a switch between them is a formulation change rather than a like-for-like purchase. The catalog offers the standard grade, a lower-activity dilution on request and a granulated form on request. All three start from the same concentrate; the differences are what has been added and what has been done to the particle. ## Three formats side by side Alkaline protease formats in the catalog | Format | What it is | When it fits | What to check | Powder, 40 mesh, ≥200,000 U/g | Concentrate standardised with carrier to the catalog activity | Most blends, where the addition rate is small | Unit definition, carrier identity, dust | Lower-activity dilution | The same concentrate extended with more carrier | Where the addition rate must be large enough to weigh and disperse evenly | Carrier load in the finished unit, activity after the process | Granulated | Agglomerated particles, usually coarser and less dusty | Lines where dust control or flow is the limiting factor | Granule size, dispersion time, heat added during granulation ## Particle size, flow and dust Forty mesh is about 420 µm: the specification ≥95% through 40 mesh means the powder passes a 420 µm sieve almost completely, not that every particle is that size. The fines fraction below about 100 µm is what becomes airborne when a bag is opened, and it is the fraction that matters for dust exposure and for segregation in a blend. Enzyme powders are respiratory sensitisers, and the safety data sheet describes the dust controls: local extraction at the weighing point, closed transfer where the line allows it, and the specified respiratory protection. A granulated grade reduces the airborne fraction but does not remove the hazard, and it can change the dispersion time in a drink mix. The water solubility is another physical line: the powder dissolves to a clear to slightly hazy solution, and a granulated grade may need longer mixing to reach the same appearance. The particle-size glossary entry explains how the mesh figure is measured and why two certificates can quote the same mesh and behave differently. ## The arithmetic when you switch grades Activity per unit of finished product is what the formula fixes; the mass of powder is the variable. A blend that needs 500,000 U per 5 g stick takes 2.5 g of a 200,000 U/g powder, or 10 g of a 50,000 U/g dilution, which will not fit in the same 5 g stick. The dilution is the right purchase when the addition rate is already a few percent of the blend and the concentrate would be too small to weigh; it is the wrong purchase when the carrier would crowd out the other ingredients. Two more numbers belong in the calculation. The first is process loss: granulation, drying and tableting each remove part of the activity, and an overage has to be based on a measured loss for that process rather than on a general rule. The second is the basis of the declaration: activity at release and activity at the end of shelf life are different promises, and a blend built to the release figure can fall below its label claim before the end of the stated life. Worked in units rather than grams, the arithmetic is exact. One kilogram at 200,000 U/g carries 200 million units; two kilograms at 100,000 U/g carry the same total. That identity holds only when both figures come from the same assay, which is why the unit definition is part of the grade and not a footnote to it. ## What changes in the specification A specification that can be checked at goods-in carries the activity as “not less than” with the unit and method reference, the carrier and its amount, the particle size, loss on drying, the pH of a 1% solution, the production organism and strain, the activity basis, and the storage statement. Switching grade changes at least three of those lines even when the activity per kilogram of blend is unchanged. Re-qualification after a switch is short but not optional: assay the new grade, run it through the real process step, assay the blend or the finished unit, and repeat the stability arm for the pack. The COA page shows which lines the release document has to carry, and the stability page covers what the process does to the activity. ## When a dilution is the wrong purchase A dilution is a poor choice when the finished unit is small, when the carrier is already close to its limit in the formula, or when the label states an activity per unit and the extra carrier would have to be declared without adding anything the customer asked for. It is also the wrong answer to a stability problem: spreading the same enzyme over more carrier does not protect it from heat or moisture, and the larger mass can pick up more water in an open weigh room. What a dilution does buy is weighing accuracy and dispersion. If the concentrate is dosed at a fraction of a percent, the scale and the mixer may not distribute it evenly, and a 20,000 U/g grade can be the difference between a uniform blend and a hot spot. That decision belongs with the process engineer, not with the purchasing desk. The catalog figures are on the alkaline protease product page, the difference between this enzyme and the neutral one is set out on the alkaline versus neutral page, and the pack sizes and order quantities are on the MOQ page. ### 02.1 Alkaline vs neutral protease: pH, substrate and the label URL: https://nutrition.rainwoodbio.com/products/enzymes/alkaline-protease/grades/alkaline-vs-neutral/ Reviewed: 2026-11-19 Alkaline protease and neutral protease are both endopeptidases produced by Bacillus, and they are not interchangeable. Alkaline protease from B. licheniformis is a subtilisin-type serine protease, EC 3.4.21.62, specified at pH 8.0–10.0 and ≥200,000 U/g. Neutral protease from B. subtilis is a zinc metalloprotease, EC 3.4.24.28, specified at pH 6.5–7.5 and ≥50,000 U/g. The pH window, the assay and the enzyme name on the label all change when one replaces the other. In one lineThe two powders are not interchangeable: the pH of the assay, the pH of the blend and the enzyme name on the label all change together. ## Two activities, two mechanisms Alkaline protease is a serine endopeptidase of the subtilisin family, with a catalytic triad and no metal cofactor. Neutral protease is a metalloendopeptidase that carries a zinc ion in its active site, and that single difference explains most of the practical behaviour: the alkaline enzyme keeps working in alkaline solution, and the neutral one does not. Both are sold as food enzyme preparations and both hydrolyse peptide bonds, but they are separate entries in an enzyme file, with separate production organisms, separate CAS numbers and separate specifications. A blend that carries both has two enzymes in it, and the certificate has to describe each one on its own terms. ## The pH window is the working difference Alkaline and neutral protease compared on the lines that decide a blend | Line | Alkaline protease | Neutral protease | Production organism | Bacillus licheniformis | Bacillus subtilis | Enzyme class | Serine endopeptidase, EC 3.4.21.62 | Metalloendopeptidase, EC 3.4.24.28 | CAS number | 9014-01-1 | 9025-39-2 | Catalog activity | ≥200,000 U/g | ≥50,000 U/g | pH, 1% solution | 8.0–10.0 | 6.5–7.5 | Assay pH in trade use | About 10.0 | About 7.0 | Inhibitor that matters | Phenylmethylsulphonyl fluoride (PMSF) and similar reagents | EDTA and other chelators The catalog pH is measured on a 1% solution, so it describes the powder rather than the blend. It is still the clearest signal of where each enzyme was built to work, and a formulator should read it as the middle of the range, not as the edge. ## Substrate, unit and why the two figures do not compare Both assays commonly use casein as the substrate and a colorimetric detection of the products, but they run at different pH values, and that alone makes the two unit scales incomparable. A neutral protease assayed at pH 7 and an alkaline protease assayed at pH 10 are measuring different rates of two different catalysts; there is no factor that converts 50,000 U/g of one into a figure for the other. Even within one enzyme, the substrate choice moves the number. Casein, haemoglobin and synthetic peptides present different cleavage sites, and a preparation rich in one activity can read high on one substrate and modest on another. The unit definition — micrograms or micromoles of tyrosine equivalent, the incubation time and the detection chemistry — belongs in the specification, and the U versus AU note for the neutral enzyme sets out how far apart two protease unit systems can sit. The practical rule is that each enzyme is dosed against its own assay. A blend needing a target number of units of each is calculated twice, from two certificates, and the totals are never added into a single “protease activity” figure. ## Stability follows the mechanism The alkaline enzyme tolerates alkaline solution and loses activity when the pH falls below its window; the neutral one is comfortable near pH 7 and loses activity outside it. Both lose activity to heat and water, and both are respiratory sensitisers as powders, so the safety data sheet and the dust controls apply to either. The chelator line is the one that catches formulators. A neutral metalloprotease loses its zinc and its activity in the presence of EDTA or a similar chelating agent, and a blend that contains one can inactivate the neutral enzyme without touching the alkaline one. The reverse risk runs through acidic actives: a vitamin C or citric acid component can pull the local pH below 7, where the alkaline enzyme sits outside its window. Check the blend pH at the start and after storage, as the stability page sets out. ## What the label and the specification must say Each enzyme is declared by its own name, with the activity and its unit, and with the carrier. “Protease” alone is not enough when the label or the specification is meant to identify which of the two is present, and a blend carrying both lists both. The activity figure carries the unit definition, because 200,000 U/g and 50,000 U/g describe two assays rather than two strengths. Regulatory status is also preparation-specific. The alkaline enzyme from B. licheniformis and the neutral enzyme from B. subtilis sit under different entries in an enzyme file and, in the United States, under different bases, so a compliance statement written for one does not transfer to the other; the compliance page covers the alkaline side. ## Choosing between them Start with the pH the enzyme will actually see. A blend that is neutral to slightly acidic points to the neutral enzyme, unless it carries a chelator, which rules that enzyme out. A blend that is alkaline, or a process step that runs at pH 9–10, points to the alkaline one. If the process moves through a pH range, both may have a place, and each is dosed against its own assay rather than against a combined figure. Then check the physical form and the dose. The alkaline grade is a 40 mesh powder at ≥200,000 U/g, so it is weighed in small amounts; the neutral grade at ≥50,000 U/g is weighed in larger ones for the same number of units. A line that cannot weigh small charges accurately may prefer the lower-activity grade, and the grades page explains what changes with a dilution. Neither choice is a statement about the finished product; it is a statement about which catalyst fits the process, and the catalog entries are on the alkaline protease and neutral protease product pages. ### 03 Alkaline protease activity falls with heat and moisture; the process decides the shelf life URL: https://nutrition.rainwoodbio.com/products/enzymes/alkaline-protease/stability/ Reviewed: 2026-11-19 Alkaline protease holds its activity in a sealed, cool, dry pack and loses it when heat, water or a pH away from its alkaline window reaches the protein. The catalog limits — pH 8.0–10.0 on a 1% solution and loss on drying ≤8.0% — describe the powder at release, not a granule, a tablet or a pouch that has been open for a month. The activity that reaches the end of shelf life is the activity the process and the pack leave behind. In one lineHeat and water do the damage, and the granulation, the drying step and the pack decide how much activity is left at the end of shelf life. ## The sealed pack is the benchmark Sealed and stored cool, the powder loses activity slowly enough that the loss is measured in months. Moisture is the variable that changes that: loss on drying ≤8.0% is a release limit, not a storage target, and two powders at the same loss on drying can still differ in free water. Water activity predicts the loss better than the gravimetric figure, and it belongs in the stability file even when it is not on the certificate. Packing is part of the same system. The catalog packs are a 1 kg foil pouch and a 25 kg fibre drum with a food-grade liner; a foil laminate with a heat seal keeps water out, a desiccant helps where the format allows it, and the pouch has to be closed between weighings. A humid weigh room, an open bag over a weekend or a drum stored against a warm wall can do more damage than a year on a cool shelf. Once the powder has taken up water, resealing does not restore the lost activity. ## A liquid hold makes a different material In water the enzyme is mobile, meets substrate and begins to cleave itself and whatever protein is in the mix. The pH 8.0–10.0 figure is measured on a 1% solution; it describes the powder’s own solution, not a guarantee that the enzyme stays stable across that window for hours. A liquid also supports microbial growth, so hold time, preservative and micro control become one question rather than three. Where a process includes a liquid stage, keep it short and cool, and assay after the hold rather than assuming the powder figure carries through. A solution held overnight is a different test from one used immediately, and a freeze–thaw cycle adds its own loss mechanism. The powder is the storage form; the solution is an intermediate. ## What drives the loss Stability factors · mechanism and control | Factor | Mechanism | Control | Temperature | Rate climbs with heat; above roughly 55–60 °C unfolding overtakes activity, and steam is worse than dry heat | Cap dryer and granulator temperatures; assay after the step | Water | Free water allows unfolding, clumping and microbial growth | Sealed foil pack, desiccant, low water activity in the blend | pH | Below about pH 7 the protein sits outside the window its activity was specified in, and stability falls with it | Check blend pH; keep acidic actives away from the enzyme | Oxidising residues | Peroxide or hypochlorite left in equipment attacks the protein | Rinse and verify before the enzyme is charged | Chelators | This is a serine protease, not a metal-dependent one, so EDTA is less of a threat than to a neutral metalloprotease | Confirm with the supplier before relying on that | Substrate and autolysis | In a wet protein mix the enzyme acts on the blend and on itself | Store dry blends; do not hold a wet blend A failed tablet can involve several rows at once: heat from drying, water from the granulation and an acidic active that pulled the pH down. That is why the fix is usually a process change rather than a larger overage. The overage hides the loss; it does not remove the cause. ## A stability programme that covers the pack and the process Real-time arms at 25 °C/60% RH and 30 °C/65% RH represent the ordinary supply chain; 40 °C/75% RH gives an early warning but cannot assign a shelf life by itself. Test at 0, 1, 3, 6, 9, 12, 18 and 24 months for activity, loss on drying, appearance and microbiology, and keep a retained sample from every lot and every time point. Then add the process challenge. Run the powder through the real granulation, drying, tableting or blending step, sample before and after, and assay both. Store the finished blend or tablet at its intended condition, because the matrix can protect the enzyme or expose it. Bracketing by pack size or grade is acceptable if the wettest and hottest case is included. ## Give the enzyme a dry, late place in the process Add the enzyme as late as the process permits. Dry blending, dry binders and direct compression avoid water; aqueous granulation, a wet coating and a hot dryer introduce it. Where a wet step cannot be avoided, assay after drying, because the loss belongs to that step and cannot be borrowed from another product. A fluid-bed dryer with an inlet temperature well above 60 °C will take activity out of the powder even when the product temperature stays lower. Tableting adds two stresses: the heat of compression and the moisture in the granule. A chewable or effervescent format is harsher still, because the acid component sits beside the enzyme for the whole shelf life. Check the blend pH before the first trial and again after storage, since excipient reactions can move it during the shelf life. The pack has to be chosen with the same care. A foil laminate with an induction seal is the usual answer for a moisture-sensitive enzyme; a plain polyethylene container is not, because it transmits water vapour slowly and the headspace exchanges with the room at every opening. If the customer will decant the powder into their own container, that use belongs in the stability design, not in a footnote. ## The declaration needs a data trail Shelf life is a property of the pack, the storage condition and the matrix, so the declaration has to name all three. Distinguish the activity at release from the activity guaranteed at the end: they are different promises, and a customer who buys against the release figure will find the gap at the end of the stated life. An 18–24 month declaration is common for a sealed foil pack stored cool and dry, but that number has to be supported by real-time data for the grade and pack in question. Ask for the stability summary, the time points, the assay method and the storage conditions behind the number. If the pack will be opened repeatedly, test that use as well. The certificate figure belongs to the release date; the figure that matters at the end of shelf life is the one the stability file can defend. The catalog figures are on the alkaline protease product page, the release lines on the COA page, the packs and the order quantities on the MOQ page, the grade options on the grades page, and the release workflow on the quality page. ### 04 Alkaline protease: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/enzymes/alkaline-protease/moq/ Reviewed: 2026-11-19 One kilogram is the minimum order because that is the pack that is filled, sealed and labelled, and every larger order is the same powder in more pouches or in a 25 kg fibre drum. The catalog lists 1 kg foil pouches and 25 kg drums, a 1–7 day lead time and a batch COA with each lot. A firm quotation needs six facts before it can be issued, and the sample is drawn from the same lot as the order whenever the schedule allows. In one lineOne kilogram is the ordering unit because that is the pouch that is filled and sealed, and a 25 kg drum is the same powder in one container rather than a lower minimum. ## Why the minimum is 1 kg The 1 kg pouch is the smallest unit the packing line fills, seals and labels, so it is the smallest unit that can carry a lot code, a certificate and a stable seal. Selling below it would mean opening a sealed pack and weighing out a portion, which turns a traceable lot into an open container with no retained-sample history. The quantity also matches the way the powder is used. At ≥200,000 U/g, one kilogram carries at least 200 million units. A blend that includes the enzyme at a fraction of a percent consumes a few grams per batch, so a single pouch covers a bench trial, a pilot run and often the first production campaign. Above 1 kg the order is built from the same unit. A 25 kg drum holds twenty-five kilograms of the same lot, packed under a food-grade liner, and a pallet holds the drums. ## The packs and what they do Catalog packs for alkaline protease powder | Pack | What it holds | Handling note | 1 kg foil pouch | Heat-sealed foil laminate, labelled with lot, activity and storage | Reseal between weighings; the pouch is the storage container once opened | 25 kg fibre drum | Food-grade liner inside a fibre drum | Keep the liner closed; do not store against a warm wall or a wet floor A foil laminate resists water vapour; a fibre drum is strong but not a moisture barrier by itself, which is why the liner matters. Labelling carries the product name, the activity with its unit, the lot code, the storage statement and the production organism, and the same lot code appears on the certificate and on the retained sample. If the receiving warehouse will decant the powder into its own container, that transfer belongs in the handling instructions. An open drum in a humid room picks up water faster than a sealed pouch, and the stability page explains what that does to the activity figure. ## Lead time and what moves it The catalog lead time is 1–7 days for a standard grade in a catalog pack. The short end applies to material in stock; the long end covers a lot that has to be packed, labelled and documented before dispatch. The range is a commitment to dispatch, not a transit time, and the transport leg is added by the Incoterm chosen for the order. Four things push an order toward the long end. A lower-activity dilution has to be prepared and assayed, which adds a production step. A granulated grade adds another. A specification that differs from the catalog — a different mesh cut, a tighter micro limit, a customer-specific carrier — needs a trial and a release test. Third-party testing, where the buyer asks for an independent laboratory report with the shipment, adds the laboratory’s turnaround on top of production. Documentation is usually the part that surprises a first order. A full pack includes the certificate for the lot, the technical data sheet, the safety data sheet, the allergen and GMO statements, and the origin record. ## Six facts a firm quotation needs A quotation that names only a product and a quantity will be revised. Six facts make it firm and comparable with another supplier’s: - Specification and revision. The document the lot will be released against, not just the product name. - Grade and activity. The U/g figure, the unit definition and the assay method behind it. - Quantity and pack. Kilograms, the number of pouches or drums, and whether the pack is the catalog format. - Destination and Incoterm. The port or door, and which side pays freight, insurance and duty. - Document set. COA, TDS, SDS, allergen, GMO and origin, plus any legalisation the destination requires. - Required date and use. When the material is needed on the line, and the process it will enter, so the grade can be checked against it. With those six, two quotations can be compared line by line. Without them, a difference in the activity basis or the pack can look like a difference in the offer. ## What a sample can and cannot show A sample shows identity, activity by the buyer’s own method, solubility, flow and dust. It is enough to run a bench blend and to see whether the powder disperses the way the process needs. It is not enough to establish lot-to-lot consistency, shelf life or packing performance, because those are properties of a series and of a pack rather than of one bag. Ask for the sample to be drawn from a lot with a certificate and to carry the same lot code, so that the activity measured in the buyer’s laboratory can be compared with the release result. Where the first production order follows quickly, the sample can be the 1 kg pouch itself, which removes a repacking step and keeps the chain from drum to trial intact. The COA page sets out what the certificate next to that sample should contain. ## The terms that belong in writing Four terms carry most of the risk. The Incoterm fixes where the seller’s responsibility ends and the buyer’s begins, including who arranges insurance and who clears export. The quotation validity fixes how long the offer holds when the buyer plans a campaign months later. The document list fixes what arrives with the lot, so that a missing SDS is a contractual gap rather than a delay. And the change-control clause fixes what happens if the carrier, the strain or the assay method changes: the buyer should hear about it before the next drum is packed, not after. Storage on receipt is the buyer’s half of the same agreement. The pack is designed for a cool, dry store, and a drum left on a loading dock in summer is outside the condition the shelf life was built on. Agree the receiving check as well: lot code against certificate, pack integrity, and a retained sample before the pouch is opened. The grades page covers what changes when a different format is ordered, and the lead-time glossary entry explains how the dispatch window is counted. The catalog figures and packs are listed on the alkaline protease product page, and the release workflow behind each lot is described on the quality page. ### 05 Where alkaline protease is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/enzymes/alkaline-protease/compliance/ Reviewed: 2026-11-19 Alkaline protease is regulated as a food enzyme preparation rather than as a nutrient, so permission attaches to the preparation — production organism, strain, fermentation inputs and carrier — and to the market where it is sold. In the European Union the Union list is still pending and national provisions govern placing on the market; in the United States the route depends on the production organism; in the United Kingdom the assimilated regulation applies, with a separate position for Northern Ireland. Use, purity, labelling and claims are four separate questions, and the file has to answer each one. In one linePermission attaches to the preparation and the market, so the file has to name the organism, the strain, the carrier and the use — the activity figure does not carry the authorisation. ## Four questions, four answers The first question is permitted use: may this preparation be used in the intended food process in this market? The second is purity: does the lot stay inside the contaminant and microbiological limits? The third is description: how is the preparation named on the label, including its carrier? The fourth is claims: what may the brand say about the finished product? “Alkaline protease” is an activity class, not one authorised substance. The enzyme is a subtilisin-type serine endopeptidase, EC 3.4.21.62, with CAS 9014-01-1, and the preparation from Bacillus licheniformis is what a dossier describes. Two powders can both read 200,000 U/g and sit under different regulatory positions, which is why the file names the organism and the strain. ## European Union: national rules while the list is pending Regulation (EC) No 1332/2008 is the framework. It makes entry on the Union list a condition of marketing and food use, and that list is still outstanding as of this review. The transitional position leaves national provisions on placing on the market and use in force in the Member States, so the file should name the Member State of sale rather than “the EU”. Applications sit on a Commission register, and the file should identify the entry for this enzyme and this use. EFSA assesses the production strain and the process, not the activity name in the abstract, so the evidence is tied to the organism and the fermentation. “EU approved” is not an accurate description while the list is pending; the defensible wording names the national provision, the register entry and the application status. Check the current text before launch. For a supplement, Directive 2002/46/EC and the national implementing rules apply in parallel, and Regulation (EU) No 1169/2011 governs the ingredient list. An enzyme with a technological function in the finished product is declared as an ingredient; one that acts only during processing is a processing aid. ## United States: the route depends on the organism The food-enzyme regulation that is usually cited, 21 CFR 184.1150, describes a bacterially derived protease preparation from Bacillus subtilis or Bacillus amyloliquefaciens, containing subtilisin and neutral proteinase, affirmed as GRAS for protein hydrolysis under current good manufacturing practice and requiring the absence of antibiotic activity by a validated method. A preparation from Bacillus licheniformis is a different organism, so that citation alone does not describe it. The usual basis is a GRAS notice specific to the organism, the strain and the preparation, or a self-affirmed GRAS file held by the manufacturer; check the FDA inventory for the current listing and the intended use. For a dietary supplement the brand also needs a dietary-ingredient basis under DSHEA and cGMP under 21 CFR 111, and the label follows 21 CFR 101.36, where enzyme activity is a specification rather than a nutrient with a daily value. ## United Kingdom: GB and Northern Ireland separately In Great Britain the assimilated version of Regulation (EC) No 1332/2008 applies, with authorisations held on the register maintained by the Food Standards Agency and Food Standards Scotland. The position should be checked for the specific enzyme, strain and use. Northern Ireland follows the EU regime, so a GB check does not answer the NI question. ## Limits and where they come from Contaminant and microbiological limits · catalog and EU food-supplement ceilings | Parameter | Catalog limit | Market note | Lead | ≤3 mg/kg | EU supplements: 3.0 mg/kg on the product as sold | Arsenic | ≤2 mg/kg | No general EU limit for this matrix; the catalog sets 2 mg/kg | Cadmium | ≤1 mg/kg | EU supplements: 1.0 mg/kg as sold | Mercury | ≤0.1 mg/kg | EU supplements: 0.10 mg/kg as sold | Microbiology | APC ≤10,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | General food-safety obligation; customer limits can be stricter | Loss on drying | ≤8.0% | Quality parameter; it also sets the activity basis Regulation (EU) 2023/915 sets the EU ceilings on the supplement as sold, not on the enzyme powder. The ingredient limit has to be chosen so that the finished product stays below the ceiling, and that calculation belongs to the brand; the certificate is one input. US state rules and UK requirements can be tighter than the catalog, so the destination limit is checked. ## The claim is the brand’s document This material carries no disease-related claim, and these pages cover the specification and the file rather than any effect in the body. “Alkaline protease activity ≥200,000 U/g” is a specification statement, not a health claim, and it belongs on the technical data sheet. Anything said about the finished product belongs to the brand and must satisfy the rules of the market where it is sold: the EU health-claims regulation, the US supplement framework and the retained UK regime each apply their own test. The enzyme file can support identity, activity and purity; it cannot support a statement about what the finished product does. ## What ships with the lot - Specification naming the unit, the assay method and the activity basis. - Lot certificate with result and limit in separate columns. - Technical data sheet covering activity, solubility, pH and pack format. - Safety data sheet with the dust-control and exposure sections; enzyme powders are respiratory sensitisers. - Allergen declaration: source organism and carrier. - Statement on GMO status for the organism and its inputs. - Origin record and strain declaration. - Composition statement, including the carrier. - Stability summary, grade- and pack-specific. - Residual-solvent statement for the recovery process. ## Checks before release to a market Market release checks for an alkaline protease lot | Check | Evidence | Market and process named | Memo covering the intended use, not only the substance | Organism and strain recorded | Origin file and strain declaration | Regulatory status confirmed | EU register entry or national provision, a US GRAS basis for the organism, or the UK register position | Contaminants inside the destination limit | Lot COA, plus a third-party report where needed | Carrier and allergen checked | Composition statement and label artwork | Pack wording checked | Activity, unit, carrier and storage on the label | Claims reviewed | Substantiation file held by the brand | Document pack complete | The ten items above, matched to the lot The catalog entry is on the alkaline protease product page; the release lines are on the COA page; the source and activity evidence is on the identity page; and the frameworks are summarised in the EU, US and UK notes. The quality page describes the release workflow. ### 06 How we prove an alkaline protease lot has the declared activity URL: https://nutrition.rainwoodbio.com/products/enzymes/alkaline-protease/identity/ Reviewed: 2026-11-19 Proving an alkaline protease lot has the declared activity takes four layers: what the material is, how the activity was measured, which protein carries it, and which documents tie the numbers to the drum. A U/g figure is one layer, and on its own it cannot separate a genuine 200,000 U/g concentrate from a diluted lot still described at the original activity, or from a preparation assayed against a different substrate. The lot code is what joins the four layers to the pack in the warehouse. In one lineIdentity is the organism, the assay and the protein figure read together, and the lot code is what ties all three to the bag. ## The four layers of identity The first layer is the preparation: a powder from Bacillus licheniformis, CAS 9014-01-1, standardised to a declared activity, with a named carrier. The second is the activity assay, with its substrate, pH, temperature, incubation time and detection principle written down. The third is the protein the activity sits on, because a rate per gram becomes comparable only when it is set against the protein that produces it. The fourth is the paper trail: certificate, lot code on the pack, retained sample and strain statement, all pointing at the same material. Each layer answers a different question about the same gram of powder, and a weakness in one leaves a gap the other three cannot close. A certificate with a method but no strain statement describes an activity, not a source. ## Units per milligram of protein Protein is measured colorimetrically against a bovine serum albumin standard, and the activity divided by the protein gives specific activity in U per mg. That ratio separates a concentrate from a dilution: dilution lowers the units per gram and the protein per gram together, so the ratio holds while both absolute figures fall. A lot at 200,000 U/g with 2% protein and a lot at 200,000 U/g with 6% protein are not the same material even when the activity line matches. The pair of numbers also sorts the failure modes. High protein with low activity suggests an enzyme that has been partly inactivated, or non-enzyme protein added as a filler. Low protein with normal activity suggests a more purified preparation, which is a different product and should be described as one. Neither conclusion can be drawn from the activity alone, which is why the COA page asks for both lines on the same certificate. The carrier matters to the reading. A maltodextrin or salt carrier contributes mass but almost no protein, so a heavily extended lot shows a low protein figure and a low specific activity. That is not fraud by itself — a declared dilution is a legitimate product — but it must be declared, because the buyer is paying for units and receiving carrier. ## What a diffraction scan cannot tell you An enzyme powder is amorphous. An X-ray diffraction scan of it shows a broad halo and no crystalline peaks, so the method can confirm the absence of a crystalline carrier phase but cannot identify the enzyme or measure its activity. A laboratory offering XRD as the identity test for a protease is selling a pattern that will look much the same for any spray-dried or freeze-dried preparation. Infrared spectroscopy is more informative and still not a release test: the amide I and amide II bands show that the material is protein, and the shape of the amide I band reflects secondary structure, but the spectrum does not name the protease or separate an alkaline from a neutral one. The pattern method that does work is gel electrophoresis. Denaturing polyacrylamide gels separate the proteins by mass, and a lot can be compared with a reference lot of the same product: the band pattern, the position of the dominant protease band and the absence of unexpected bands are evidence of consistency. It is a comparison, not an absolute identity, and it is strongest when run beside the activity and the strain statement. ## The ways a lot can be other than it claims Failure modes and the test that exposes each | Mode | What it looks like | What catches it | Dilution with carrier | Normal powder, lower U/g than the label | Activity and protein both low; specific activity held | Neutral protease substituted | Activity plausible in a generic assay | pH–activity profile; activity collapses at pH 10; EDTA inhibition | Another alkaline protease | Same unit name, different kinetics | Protein pattern; strain statement; assay at two pH values | Heat-inactivated blend | Correct colour and flow, low activity | Activity at two incubation times; specific activity | Activity boosted by free amino acids | Assay reads high, protein normal or low | Blank correction; dialysis or precipitation before assay | Undeclared carrier change | Specification sheet unchanged | Carrier identity; change-control notice The last two rows are the ones a buyer rarely expects. The Folin-Ciocalteu reagent reacts with tyrosine and tryptophan, and with reducing substances, so a powder spiked with free amino acids or a reducing agent reads high without carrying more enzyme. A blank and a clean-up step on the sample expose it. The carrier change is quieter: the activity can stay inside the specification while the blend’s flow, dust and label declaration all move. ## Writing the specification so it can be checked A testable specification for this material carries the activity as “not less than” with the unit and method reference, the protein or specific-activity range, loss on drying, particle size, the carrier and its amount, the production organism and strain, the activity basis, and the storage statement. Two habits make the difference. Define the unit once, in a method appendix, and keep that appendix under change control, so that a method change cannot pass as a specification change. Then state which identity check is applied to every new lot — the protein pattern against a reference lot, the strain statement, or both — so identity is a routine release step rather than a reaction to an odd result. The assay glossary entry covers the vocabulary, and the specification entry covers how the limits are written. ## Five questions to put to a supplier First, which strain produced this lot, and where is it held? Second, what exactly does one U mean in your assay — substrate, pH, temperature, incubation time, detection and tyrosine basis? Third, what are the activity, the protein and the specific activity for this lot? Fourth, what test would show that this powder is not a dilution or another protease, and will you run it? Fifth, which document carries the lot code that matches the pack? A supplier who answers all five in writing has given a buyer something to audit. One who answers only the third has given a number, and a number is the layer that is easiest to produce and hardest to verify. The catalog figures are on the alkaline protease product page, the comparison with the neutral enzyme is on the alkaline versus neutral page, the grade options are on the grades page, and the release process behind the answers is described on the quality page. ### 01 What the COA for choline bitartrate actually contains URL: https://nutrition.rainwoodbio.com/products/vitamins/choline/coa/ Reviewed: 2026-11-19 The certificate for a choline bitartrate lot reports appearance, identification by IR, assay by titration on the as-is basis, choline by HPLC, loss on drying, pH, particle size, the heavy-metal panel and microbiology. Each row should show the method, the release limit and the result for that lot. The ranges below are the catalog specification; the batch COA is the document that confirms a particular pack. The assay and the choline figure answer different questions and belong side by side. In one lineThe bitartrate assay is not the choline dose; the salt, the figure and the basis have to be named together. ## The certificate as a release panel A certificate is auditable when each line carries the test, the method, the release limit and the result. The table is the catalog panel; the certificate repeats it with a result column and a lot code. Release panel · choline bitartrate | Parameter | Method | Release limit | Appearance | Visual | White crystalline powder | Identification | IR against a reference | Conforms | Assay, as-is | Titration (choline) | 96.5–100.5% | Choline | HPLC | 40.5–41.5% | Loss on drying | Gravimetric | ≤1.0% | pH (5% solution) | Potentiometry | 3.0–4.5 | Particle size | Sieve analysis | ≥95% through 40 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent The heavy-metal and microbiology rows are panels, not single results. The certificate should list each element and organism, even when the line reads “absent”; a panel compressed to “metals pass” cannot be compared with a destination limit. ## What the titration and the HPLC measure The titration measures the choline cation, not the tartrate. Choline bitartrate is a 1:1 salt; the quaternary ammonium ion is titrated with a standard acid, commonly perchloric acid in glacial acetic acid, to a potentiometric endpoint. The result is calculated as choline bitartrate using 253.25 g/mol and reported on the as-is basis. It is a salt-equivalent figure, not an anion assay. The HPLC also measures choline, after separation. Choline has weak ultraviolet absorbance, so the method needs a separation and detector suited to a quaternary ammonium ion; the certificate should name the column, detector and standard. The catalog window of 40.5–41.5% brackets the theoretical 41.1% (104.17/253.25), the figure that matters for dose and label. Because both methods measure the same cation, they should agree. Convert the titration to choline (assay × 104.17/253.25) and compare it with the HPLC figure. A gap points to a titratable impurity or an HPLC interference; it does not identify the anion. The anion is proven by IR and, where wanted, a tartrate precipitation test. The certificate should state both bases and name the titrant, endpoint and HPLC conditions. ## Release limit, batch result and the basis The release limit is the boundary; the batch result is the measurement. Both belong on the page, in separate columns, with the method beside them. A result column filled with the specification range is a copy of the gate, not a result; “passes specification” is a conclusion the reader should be able to reach from the numbers. The assay is as-is, and that is not a detail. The same dry material reads higher on a dried basis, so an as-is result must not be compared with a dried-basis limit from another supplier. The loss-on-drying figure sits beside the assay for that reason, and the choline figure should also state its basis; if the certificate leaves it out, ask. Some lines are pass/fail: appearance and IR. “IR conforms” is meaningful only if the certificate names the reference material and the sample preparation; a spectrum compared with nothing is a picture, not an identity test. ## What moves between lots The reaction and crystallisation set the ratio; drying sets the loss on drying; residual acidity sets pH; milling sets particle size. Because both potency figures measure choline, they should move together. A neutral diluent lowers both; a chloride substitution raises both, but the assay expressed as bitartrate rises faster and usually breaks 100.5% before the choline window does. A small chloride spike can stay inside both windows, which is why the chloride test is the direct check. A gap between the two choline figures points to a method interference or a co-eluting peak, not to the anion. Moisture is the common drift. A pack left open takes up water, the loss on drying rises, the powder cakes, and the as-is assay falls even though the dry material is unchanged. Colour and odour are less quantitative and often more revealing: a tan tint or an amine note can follow a hot drying step or an impurity while the assay still passes. Ask for the batch record before rejecting on appearance alone. A trend across lots — loss on drying rising, pH falling, the gap between the two choline figures widening — says more than one result near an edge. ## When an outside test earns its place Order an independent test for a new source, a first shipment into a regulated market, a form claim the certificate does not prove, or a disputed result. The panel is not a repeat: FTIR against a choline bitartrate reference, HPLC for choline, the titration, a chloride test, loss on drying and ICP-MS for the metals, with XRD when a crystalline diluent is suspected. Ask for the detection or quantification limit for chloride; “not detected” without a limit says something about the method, not the sample. The FTIR report should name the reference standard and the sample preparation, because water broadens the hydroxyl region and can hide the difference between two salts. An outside laboratory is the sensible referee when a result is contested. Give it the retained sample, the certificate and the specification, and ask for the tests that separate the salts; the sample tested should be the sample retained. ## Six lines to compare between suppliers Supplier comparison · the lines that must match | Line | What to ask | Why it matters | Form and CAS | Choline bitartrate, CAS 87-67-2, or another salt? | Other salts carry different choline figures | Assay and basis | Titration result, as-is or dried? | As-is and dried figures are not interchangeable | Choline and method | HPLC result and detector? | The choline figure drives the dose and the label | Moisture and pH | Loss on drying and 5% pH results? | Water and acidity move the powder's behaviour in the blend | Particle size | 40 mesh, 80 mesh or granulated? | Flow, segregation and caking differ | Identity and chloride | IR reference and chloride result? | A choline figure alone does not prove the bitartrate Two quotations that match on assay but diverge on choline, moisture or chloride are not describing the same powder. Lot traceability is the second layer: the lot code should match on the certificate, the pack and the retained sample, and the certificate should name the manufacturer and any blending or repacking. The catalog limits sit on the choline bitartrate product page. The salt comparison is on the grade page, the identity tests on the identity page, and the release workflow on the quality page. The two methods are described in the HPLC method note and the FTIR method note. ### 02 Choline bitartrate or chloride: choosing a grade URL: https://nutrition.rainwoodbio.com/products/vitamins/choline/grades/ Reviewed: 2026-11-19 Choline bitartrate and choline chloride are two salts of the same nutrient, not two grades of one powder. The catalog bitartrate carries 40.5–41.5% choline and 96.5–100.5% salt by titration; the chloride carries about 74.6% choline at theoretical. The bitartrate is a crystalline, acidic solid at 40 mesh; the chloride is deliquescent and often handled as a solution. The dosage form and the label decide; a switch changes the weight per dose, water pick-up, assay and ingredient line. In one lineThe salt decides how much powder delivers a given choline figure, and the label has to name the salt that was used. ## Choline is a nutrient name, not an ingredient name Choline is the cation; it is supplied as a salt. Bitartrate, chloride, citrate, alpha-GPC and citicoline are different ingredients with different choline fractions and handling. A brief that says “choline 300 mg” has not chosen a raw material: the label line, the scale weight and the certificate depend on the salt. If the label says choline bitartrate, the powder must be that salt; a chloride lot cannot be substituted. This page compares the two choices without ranking them, because the answer depends on the matrix and the label. ## The two salts side by side Choline bitartrate and choline chloride · identity and handling | Property | Choline bitartrate | Choline chloride | CAS · formula · molecular weight | 87-67-2 · C9H19NO7 · 253.25 | 67-48-1 · C5H14ClNO · 139.62 | Choline, theoretical | 41.1% | 74.6% | Choline, catalog | 40.5–41.5% (HPLC) | Not in this catalog | Salt assay | 96.5–100.5% as-is (titration) | Not in this catalog | Appearance | White crystalline powder | Solid or solution | pH (5% solution) | 3.0–4.5 | Closer to neutral | Water pick-up | Hygroscopic | Deliquescent | Typical use | Capsules, tablets, dry blends | Liquids, solutions, protected dry blends | Label source line | Choline (as choline bitartrate) | Choline (as choline chloride) One gram of bitartrate carries about 411 mg of choline; one gram of chloride about 746 mg. The catalog bitartrate window is built around 41.1%; the chloride's 74.6% is theoretical, and the supplier's grade will have its own window. Do not apply the bitartrate window to the chloride. ## Water, pH and the powder in the room Choline bitartrate is hygroscopic. The release limit for loss on drying is ≤1.0%; an open pack takes up water, cakes and falls in as-is assay even though the dry material is unchanged. Choline chloride is deliquescent: it can take up enough water to dissolve, which is why it is often supplied as a solution. Both need a sealed pack; the chloride more. The bitartrate gives a 5% solution at pH 3.0–4.5, acidic from the hydrogen tartrate; the chloride is closer to neutral. In a blend with carbonate or bicarbonate, the bitartrate reacts and can release carbon dioxide; the chloride fits an effervescent system better, but its water pick-up remains. The acid load and taste differ by format. Both salts are freely soluble; the bitartrate gives an acidic solution, the chloride a near-neutral one. In a liquid, the chloride's higher choline per gram means less powder, but the chloride ion and taste come with it. The bitartrate catalog grade is 40 mesh, with 80 mesh or granulation on request; finer powder cakes faster. ## Matching the salt to the dosage form Capsules and tablets. The bitartrate is the usual dry choice: crystalline 40 mesh powder, loss on drying ≤1.0%, acidic but workable. The chloride carries more choline per milligram, but a deliquescent powder is sticky on a press; if used, control humidity and seal the pack. Sticks and drink mixes. The bitartrate dissolves freely but makes an acidic, tart drink. The chloride is closer to neutral and delivers more choline per gram, but picks up water; the foil barrier decides the label date. Liquids. The chloride is the practical choice where the formula can carry the chloride and the taste. The bitartrate adds acidity and tartrate to a system that may not want either. Gummies, chewables and effervescent systems. Test both in the matrix: the bitartrate lowers pH and adds tartrate; the chloride adds chloride and is hygroscopic. In an effervescent tablet the bitartrate reacts with the carbonate, so start with the chloride and handle water pick-up in the pack. ## What the label must say The ingredient line names the salt; the nutrient line names choline. “Choline (as choline bitartrate) 100 mg” means 100 mg of choline, not salt; the salt weight behind it is about 243 mg. “Choline bitartrate 500 mg” declares the salt, which carries about 206 mg of choline. Decide which figure the label uses and match the certificate. In the United States, where choline is declared, the Supplement Facts panel uses a Daily Value of 550 mg for adults and children four years and older. In the EU and UK there is no choline NRV, so no percentage can be calculated; the label should declare choline per portion and name the salt. The EU and UK claim registers attach a minimum of 82.5 mg of choline per portion to the authorised choline claims; check the current wording, and do not use a claim because the ingredient is permitted. The arithmetic: choline mg = salt mg × 0.411 for the bitartrate, or × 0.746 for the chloride. For the label worksheet, use the measured choline from the COA, not the theoretical fraction. ## What changes when the salt changes Switching salts · what has to be rechecked | Change | Bitartrate to chloride | Chloride to bitartrate | Weight for the same choline | ×0.55 | ×1.82 | Capsule or fill | Smaller fill, or a lower dose | Larger fill, or a lower dose | pH and taste | Less acidic, less tart | More acidic, tart | Water pick-up | Higher; deliquescent | Lower; still hygroscopic | Assay method | Bitartrate calculation does not transfer; use the chloride method | Bitartrate calculation applies | Label and stability file | New salt name, choline figure and pack data | New salt name, choline figure and pack data A switch is a formulation change, not a purchasing substitution: scale weight, capsule size, pH, water pick-up, assay method, label and stability file all change. Customer notification and a new specification are part of it. ## Writing the grade into the specification Start with the salt and the CAS number. For the bitartrate: “Choline bitartrate, CAS 87-67-2, 96.5–100.5% as-is by titration, choline 40.5–41.5% by HPLC, IR against a reference, loss on drying ≤1.0%, pH 3.0–4.5 in 5% solution, ≥95% through 40 mesh, and the catalog heavy-metal and microbiology panels.” For the chloride: “Choline chloride, CAS 67-48-1, choline by HPLC or ion chromatography, water, pH and chloride within the agreed limits.” Do not copy the bitartrate limits across; the two salts have different assay methods, water behaviour and label names. Add a chloride limit if the buyer needs to show the bitartrate is chloride-free; the catalog specification does not carry one. State the assay basis, the choline method and the IR reference. A specification that says “choline” without the salt is not a grade. The catalog limits are on the choline bitartrate product page. The direct comparison is on bitartrate vs chloride, the release panel on the COA page, and the market rules on the compliance page. ### 03 Choline bitartrate is hygroscopic; the pack decides the shelf life URL: https://nutrition.rainwoodbio.com/products/vitamins/choline/stability/ Reviewed: 2026-11-19 Choline bitartrate is hygroscopic. A sealed foil pouch or drum keeps the powder inside its ≤1.0% loss-on-drying release limit; an open pack, a humid room or a damaged liner lets it take up water, cake and fall in as-is assay. Heat and alkaline excipients are secondary risks. The pack, not the molecule, sets the shelf life. In one lineThe powder is stable when it stays dry; the pack and the room decide whether it stays dry. ## Water is the first failure mode Choline bitartrate takes up water from the air. The ≤1.0% loss-on-drying limit is the release gate, not a storage guarantee: a lot can pass at release and fail after a few weeks in an open container. As water rises, particles stick, flow falls and the powder cakes; on drying, the bridges harden into lumps that no sieve will fix. Caking is worse with a fine powder and with pressure. The catalog grade is 40 mesh crystalline, with 80 mesh or granulation on request; the finer the powder, the more surface for water to reach and the more readily a stacked pallet compacts it. A granulated grade flows better but is not a moisture barrier. The as-is assay falls as water rises because the water is counted in the sample weight. The dry material may be unchanged, but the certificate figure moves. Read the loss on drying and the assay together, and do not dry a caked lot and call it release material: the water may have dissolved and recrystallised the surface, and the particle-size distribution will have changed. ## A solution is a different material The salt is freely soluble, and a 5% solution sits at pH 3.0–4.5 because of the hydrogen tartrate. In solution the salt dissociates. The choline cation is not an ester and is not waiting to hydrolyse; the practical risks are microbial growth, pH drift and water activity, not a fragile bond in the molecule. The low pH helps but does not preserve. Yeasts and moulds can grow in an acidic solution, so a liquid format needs a preservative system or another hurdle, a validated hold time and microbiological testing. In a drink mix the powder's low water activity is the protection; once water is added, that protection is gone and the clock starts. Heat is the other solution risk. A hot hold can produce an amine note and shift the pH, so the process temperature belongs in the stability protocol. Light is secondary; an opaque or foil pack is enough for the powder. ## Heat, pH, metals and the room Heat enters twice: in drying the raw material and in storing or processing the powder. A hot drying step can tint the crystals or leave an amine note while the assay still passes, which is why appearance and odour belong on the certificate. An accelerated stability arm should include temperature, not only humidity. The bitartrate is acidic. Carbonates, bicarbonates, oxides and hydroxides neutralise it; in a sealed sachet the carbon dioxide released can swell the pack. That is a formula compatibility question, not a raw-material defect, and it is one reason the chloride is considered for effervescent systems. Tartrate can chelate iron and copper, and trace metals can discolour the powder. The catalog heavy-metal panel covers lead, arsenic, cadmium and mercury, not iron or copper; if the matrix is sensitive, add those two to the specification. The room matters as much as the pack: dispensing from an open bowl in a humid area can raise the loss on drying in a single shift. Control the humidity and the exposure time, and seal the remainder before the break. ## The pack and the matrix The standard packs are a 1 kg foil pouch and a 25 kg drum. The foil is the moisture barrier; on the drum, the liner and the headspace do the same work. A pouch with a pinhole or a drum opened and reclosed in a humid room is no longer the same barrier, even though the label has not changed. Where the pack design calls for a desiccant, it belongs inside the barrier, not in the outer carton. The matrix can make the water problem better or worse. A capsule shell picks up water from a humid blend, so the filled capsule needs a desiccant and a controlled room. A tablet adds compression heat and, with a carbonate, the acid reaction. A stick pack needs a foil barrier, not paper or a thin polyethylene laminate. A liquid needs the preservative and pH work described above. A gummy adds water activity and a drying step; test the salt in the matrix. Headspace is part of the pack. A 1 kg pouch has more surface per volume than a 25 kg drum, but the drum's liner is the barrier and its headspace is a water reservoir. Do not assume the drum's assigned shelf life applies to a pouch repacked from it. ## A stability protocol that answers the pack question Design the study around the pack, not only the molecule. Use at least the 1 kg pouch and the 25 kg drum, or a representative liner, and more than one lot. Run a real-time condition such as 25 °C/60% RH and an accelerated condition such as 40 °C/75% RH, plus a humidity stress and a transport cycle if the route is long. Time points of 0, 1, 3, 6 and 12 months are the minimum; 24 months only if the assignment needs it. Test appearance, loss on drying, assay, choline, pH, particle size or caking, microbiology and pack integrity. Include an in-use arm: open the pack, expose it, reseal it and test at intervals. The storage statement and the assigned shelf life should follow from that arm, not from sealed-pack data alone. Predefine failure: loss on drying above 1.0%, visible caking or lost flow, assay below 96.5%, pH outside 3.0–4.5, or a microbiological limit exceeded. A result inside the specification but trending toward a limit is a warning. A customer's matrix needs its own study; the raw-material data do not cover the capsule, stick or gummy. ## How the shelf life is set The catalog does not carry a shelf-life number. The assigned shelf life is the outcome of the protocol for a defined pack, and the batch COA carries the retest date rather than a marketing claim. A 1 kg pouch and a 25 kg drum may receive different assignments if the barrier or the headspace differs, and repacking resets the question. The storage statement should match the tested condition: a sealed pack, dry, cool, away from direct sunlight. If the label asks for a condition the study did not cover, the shelf life is unsupported. A customer who repacks starts a new question; the original assignment does not travel with the powder. The release panel is on the COA page, the pack options on the MOQ page, and the market storage and labelling rules on the compliance page. The moisture test is defined in the loss-on-drying glossary entry, and the release workflow is on the quality page; the catalog limits sit on the choline bitartrate product page. ### 04 Choline bitartrate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/vitamins/choline/moq/ Reviewed: 2026-11-19 The minimum order for choline bitartrate is 1 kg in a foil pouch; larger orders ship in 25 kg fiber drums. Lead time is 1–7 days from order confirmation. A quotation needs six details: the salt and specification, quantity and pack, particle size, destination and delivery term, market and documents, and any special requirement. A sample comes from a released lot with its certificate. In one lineOne kilogram is enough to test, trial and retain; the drum is the same released lot in a larger pack. ## Why the minimum is one kilogram A minimum order is often read as a commercial threshold. For a released lot it is a traceability threshold. One kilogram is enough material to draw a sample, run the release panel, keep a retained sample and still ship a usable quantity. Below that, the lot number and the certificate stop doing useful work, because a buyer cannot repeat a test on the same material. The kilogram also matches the trial scale. At 250 mg per capsule, 1 kg of choline bitartrate fills about 4,000 capsules before overage and losses; at 500 mg, about 2,000. In choline terms the pouch carries about 411 g, which is 4,000 doses at 100 mg or 2,000 at 200 mg. That covers a pilot batch with material to spare. It proves identity, assay and blend behaviour, not press speed; that question needs a drum and a line trial. Orders above the minimum are not a different grade. Where the quantity allows, the drum is drawn from the same released lot as the pouch, and the certificate carries the same lot code. Where the order exceeds one lot, the shipment carries one certificate per lot, and the packs are labelled accordingly. ## Packs, formats and labels Choline bitartrate packs · net weight and typical use | Pack | Net weight | Format | Typical use | Foil pouch, heat sealed | 1 kg | 40 mesh; 80 mesh or granulated on request | Trial batches, small runs, sample retention | Fiber drum | 25 kg | 40 mesh; 80 mesh or granulated on request | Production runs, single-lot campaigns The standard grade is the 40 mesh crystalline powder; 80 mesh and granulation are prepared on request. Mesh matters. A finer powder distributes better in a low-dose capsule or tablet, but it cakes faster and generates more dust; a granulated powder flows better and is easier to handle in a humid room. The format is fixed at order because it changes the milling step and the lead time. Each pack carries the product name with the salt, the CAS number, the lot code, the net weight, the assay, the retest date and the storage condition. The lot code on the pack must match the certificate and the retained sample; if it does not, the certificate describes a different pack. The 1 kg pouch is a commercial pack, not a sample, and it is the smallest unit that carries the full document set. ## Lead time and what moves it The standard lead time is 1–7 days from order confirmation. The low end applies to a 1 kg or 25 kg order of the 40 mesh grade with the standard document pack. The high end applies when the order needs milling to 80 mesh, granulation, extra testing, a document set for a market the file has not covered before, or a lot that is still in release. Release is the other clock. Material ships after the lot has been released against the specification, not before, so an order placed against a lot still in testing waits for the result. If the delivery date is fixed, say so at enquiry: it changes which lot is reserved and whether the format can be changed without a new milling run. Destination documents and label checks can add time after the material is ready, so send the market and the label language with the enquiry. ## The six details a quotation needs Six inputs for a choline bitartrate quotation | Detail | Why it changes the answer | Salt and grade, with the specification or monograph | Choline bitartrate and choline chloride are different materials; a catalog grade and a customer specification are released against different limits | Quantity and pack | The 1 kg pouch and the 25 kg drum are different packing lines and different minimum quantities | Particle size or granulation | 40 mesh, 80 mesh and granulated are separate preparation steps | Destination and delivery term | Sets the document set, the label language and the transport paperwork | Market and documents required | The EU, US and UK files differ; a specification alone is not a compliance file | Any special requirement | Split deliveries, pallet configuration, customer labelling or additional testing An enquiry that supplies all six gets a firm answer. One that supplies a product name and a tonnage gets a range, because the answer depends on the other five lines. The quotation should repeat the specification revision and the pack, so the order and certificate refer to the same document. ## Samples and receipt testing A sample is drawn from a released lot and travels with that lot's certificate. It is the same material as the commercial pack, not a separate bench batch, which is the point: a sample from a different batch tells the buyer nothing about the drum that will arrive. Ask for enough to run the panel and retain a portion. On receipt, the buyer's own identity test belongs in the file. US cGMP requires identity testing of each component before use, and the EU and UK quality systems expect the same discipline. The minimum useful receipt test is identification by IR plus a titration assay and an HPLC choline figure; loss on drying, pH and mesh follow the risk assessment. A chloride test is worth adding where the supplier's file does not show one. Keep a portion of every delivery as a retained sample, sealed and labelled with the lot code. It is the only material that can answer a question about that shipment later. ## The technical terms that belong in the order The order should fix the salt and form, the specification revision, the assay basis, the choline method, the loss-on-drying limit, the pH range, the mesh or granulation, the pack, the lot, the quantity, the delivery term, the document set, the label language, the storage condition and the retest date. It should also state how a deviation is handled and the complaint window after receipt. Commercial terms such as payment and freight are confirmed in the order; this page does not set them. Change control is part of the technical terms. A change of manufacturing site, process or specification should be notified before the next shipment, and a switch from choline bitartrate to choline chloride is a new material, not a substitution under the same line item. The specification, label and stability file all change with it. The release panel is on the COA page, the two salts on the grade page, the pack and moisture behaviour on the stability page, and the market documents on the compliance page. The catalog limits sit on the choline bitartrate product page; the ordering terms are defined in the MOQ glossary entry and the lead-time entry. ### 05 Where choline bitartrate is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/vitamins/choline/compliance/ Reviewed: 2026-11-19 Choline bitartrate appears in supplements in the EU, US and UK, but the legal route differs. The US regulates it as a dietary ingredient under DSHEA. The EU and UK do not list choline among the harmonised vitamins and minerals, so national rules for other substances decide the route. In all three, the file has to show the named salt, the choline per portion, the contaminant results, the label and the claim basis. In one lineThe permission is for the market and the form; the certificate is for the lot; the label and the claim are separate files. ## Four checks, four documents The checks are the legal route and named form (choline bitartrate, CAS 87-67-2, not “choline”), the contaminant result against the destination limit, the label with the salt name and choline figure, and the claim with its own authorisation and evidence. They fail independently: a lot can pass every metal limit and still be mislabelled. The file should let a reviewer reach each conclusion separately. ## European Union Directive 2002/46/EC harmonises the vitamins and minerals permitted in food supplements and their forms. Choline is not in Annex I, so it is not a harmonised vitamin or mineral form. Other substances are possible, but the EU has no harmonised positive list; the destination Member State's rules and notification requirements decide. Contaminants sit in Regulation (EU) 2023/915: at sale a supplement must stay within 3.0 mg/kg lead, 1.0 mg/kg cadmium and 0.10 mg/kg mercury. Arsenic is not harmonised, so a Member State may apply its own figure; the catalog limit of ≤2 mg/kg is contractual, not an EU limit. Labelling follows Regulation (EU) No 1169/2011 and the Directive's supplement particulars. The ingredient list names choline bitartrate, and the label should declare choline per portion. There is no EU NRV for choline in Annex XIII, so no percentage can be calculated. Claims fall under Regulation (EC) No 1924/2006 and the list in Regulation (EU) No 432/2012. The choline entries carry a condition of at least 82.5 mg of choline per 100 g, 100 mL or portion; only the authorised wording may be used. ## United States Choline bitartrate is a dietary ingredient under DSHEA. The file should state the basis — pre-1994 history, a GRAS conclusion or a new dietary ingredient notification at least 75 days before marketing — and keep the evidence. 21 CFR 101.36 sets the Supplement Facts panel. Where choline is declared, the Daily Value is 550 mg for adults and children four years and older, and the source line names the salt, for example “Choline (as choline bitartrate) 100 mg 18% DV”; that name has to match the certificate. 21 CFR 111 requires identity testing of each component, so the buyer's own receipt test is part of the file. California's Proposition 65 sets exposure thresholds many buyers work to; a mg/kg figure alone does not answer the question, because the daily dose has to be modelled. A structure/function statement must be substantiated and carries the DSHEA disclaimer; a disease claim is not available. ## United Kingdom The Food Supplements (England) Regulations 2003 set out the permitted vitamins, minerals and forms in Schedules 1 and 2. Choline is not in those schedules, so the UK route is the other-substance route under general food law and national rules. Wales and Scotland have parallel instruments; Northern Ireland follows the EU lists under the Windsor Framework. Great Britain retained Regulation (EC) No 1881/2006 as assimilated law rather than adopting Regulation (EU) 2023/915. The limits carried over at lead 3.0 mg/kg, cadmium 1.0 mg/kg and mercury 0.10 mg/kg, with no harmonised arsenic limit. The current text on legislation.gov.uk is the reference. Labelling follows the Food Information Regulations 2014 and the 2003 supplement particulars, including the UK address of the operator. There is no UK NRV for choline, so no percentage applies. The GB claims register carries the choline entries with the same 82.5 mg per portion condition; a wording not on the register cannot be used. ## The contaminant table Heavy metals · catalog limit and market position, food supplements | Element | Catalog limit on the powder | EU supplement limit | UK supplement limit | US federal position | Lead (Pb) | ≤3 mg/kg | 3.0 mg/kg | 3.0 mg/kg | No federal maximum; Prop 65 may apply | Arsenic (As) | ≤2 mg/kg | Not harmonised; Member State rules may apply | Not harmonised; national rules may apply | No federal maximum | Cadmium (Cd) | ≤1 mg/kg | 1.0 mg/kg | 1.0 mg/kg | No federal maximum | Mercury (Hg) | ≤0.1 mg/kg | 0.10 mg/kg | 0.10 mg/kg | No federal maximum Material and product limits differ. The catalog column applies to the powder as shipped; the regulation applies to the supplement as sold, after dilution into doses. A powder that meets the material limit will normally meet the product limit, but the calculation has to be kept, because a high-dose single-ingredient capsule barely dilutes the powder. ## The claim boundary Permission to use the ingredient is not permission to make a claim. In the EU and UK, only authorised wording may be used, and the choline entries carry the 82.5 mg per portion condition; a product below that figure cannot use them. The claim is about choline, not the salt. In the US, a structure/function statement needs substantiation and the DSHEA disclaimer; a disease claim is not permitted. No market in this review offers a disease-related claim for a choline supplement. The ingredient page is not claim substantiation, and a certificate does not support a claim by itself. The claim file should hold the exact wording, the register entry, the choline-per-portion calculation and the evidence. ## The document pack - Batch COA with IR, titration as-is, choline by HPLC, loss on drying, pH, particle size, metals and microbiology. - Specification and technical data sheet naming the salt, the CAS number, the assay basis and the choline method. - Safety data sheet with the standard sixteen sections. - Contaminant report against the destination limits, including the arsenic decision. - Nutrition worksheet showing choline per portion, the US % of the 550 mg Daily Value, and the absence of an EU or UK NRV. - Claim file with the exact wording, the register entry, the 82.5 mg calculation and the substantiation. - Allergen, GMO, irradiation and country-of-origin statements, plus the manufacturing flow. - Novel-food status statement where required, and national notification evidence where required. ## The checks before a shipment - The certificate names choline bitartrate, CAS 87-67-2, not “choline”. - The label ingredient line names the same salt as the certificate. - The choline figure per portion is calculated as choline, not as the salt weight. - The US label uses the 550 mg Daily Value; the EU and UK labels carry no NRV percentage. - The contaminant results are compared with the product as sold, and the arsenic position is documented. - The claim wording is on the register, the 82.5 mg condition is met, and no disease claim is present. - The EU destination's national route and notification are checked; the UK check covers GB and Northern Ireland separately. - The buyer holds its own identity test, and the lot code matches the certificate, pack and retained sample. The instruments are described on the EU, US and UK regulatory pages. The release tests are on the COA page, and the catalog limits on the product page. ### 06 How we prove a choline bitartrate lot is the bitartrate URL: https://nutrition.rainwoodbio.com/products/vitamins/choline/identity/ Reviewed: 2026-11-19 A choline figure alone does not prove choline bitartrate. The proof is a combination: an IR spectrum that matches the bitartrate reference, a tartrate identification test, a titration that measures choline, and an HPLC result for choline. The titration and the HPLC both measure the cation; the IR and the tartrate test identify the anion. The catalog carries IR, titration and HPLC; a supplier who reports only choline has shown the nutrient, not the salt. In one lineThe titration and HPLC measure choline; the IR and the tartrate test prove the bitartrate. ## Four layers, four questions Identity is not one test: each layer adds a different check, and an assay-only supplier has answered the narrowest one. Identity layers · the question each test answers | Layer | Test | Question it answers | Document | Name, CAS 87-67-2, formula C9H19NO7 | Is the file about the right substance? | Spectral | IR against a choline bitartrate reference | Does the whole molecule match? | Titrimetric | Titration of choline, as bitartrate | How much choline is present? | Chromatographic | HPLC for choline | Is the peak pure, and how much? The titration and HPLC both measure the choline cation; they are independent methods, not independent analytes. The anion is proven by IR and, where wanted, the tartrate precipitation test: potassium chloride added to a sample solution gives a white precipitate of potassium bitartrate. A chloride lot responds to the titration and HPLC and fails the IR and tartrate test. A neutral diluent lowers both choline figures. Loss on drying, pH, particle size, metals and microbiology are consistency checks, not identity tests. ## The two choline figures should agree The titration reports choline bitartrate, using 253.25 g/mol; the HPLC reports choline directly. Convert the titration to choline (assay × 104.17/253.25) and compare it with the HPLC figure. A true lot gives about 41.1% by both routes, inside the catalog windows. A gap is a method signal, not an anion test. Titration high relative to HPLC points to another titratable base or an endpoint problem; HPLC high relative to titration points to a co-eluting peak. A neutral diluent lowers both. A chloride substitution raises both, but the assay as bitartrate rises faster and usually breaks 100.5% before the choline window; a small spike can stay inside both, so the chloride test is the direct check. Both results must be on the same basis. The catalog assay is as-is and the choline figure should say its basis; if one is dried, convert before comparing. The comparison is a consistency check, not proof: only the IR and tartrate test answer the anion question. ## IR is the release identity The catalog identification is IR against a reference. The spectrum should show the tartrate carboxylate and trimethylammonium bands; a choline chloride spectrum lacks the tartrate carboxylate and does not match. A blend with lactose, dextrose or another crystalline diluent shows extra bands. The certificate should name the reference material and the sample preparation, not only “conforms”. A tartrate precipitation test is a useful chemical confirmation. Potassium chloride added to a sample solution gives a white precipitate of potassium bitartrate; a chloride salt does not. The test is qualitative but specific to the tartrate anion and cheap to run beside the IR. Water broadens the hydroxyl region and can hide differences, so dry the sample before the scan and report how. IR is not a potency method: a spectrum can match while the assay is low, and an assay can pass while the spectrum is wrong. ## The crystal check Choline bitartrate is crystalline; an X-ray diffraction pattern is a fingerprint of that crystal. It detects a second crystalline phase and crystalline diluents such as lactose or dextrose. It does not measure choline, and it is a poor detector of an amorphous filler, which scatters broadly rather than in sharp peaks. Peak position is the identity information; peak width is not. A milled 80 mesh lot has smaller crystallites than a 40 mesh lot, so its peaks are broader, but the positions stay the same. Extra peaks at new positions mean a different solid, not a different particle size. Ask for the reference pattern. ## The substitutions that turn up Choline bitartrate substitutions · the signal and the test that catches it | Substitution | What the buyer sees | What catches it | Choline chloride | HPLC choline high; titration high, often above 100.5% as bitartrate; pH closer to neutral | Chloride test, IR, tartrate test, assay upper limit | Another choline salt (citrate, alpha-GPC, citicoline) | HPLC choline passes; titration may pass or fail; different IR; tartrate test negative | IR, tartrate test, HPLC profile; phosphorus where present | Neutral diluent (lactose, dextrose, maltodextrin, silica) | Both choline figures low; loss on drying or ash may move; extra IR bands | Assay with choline, IR, XRD, ash | Excess tartaric acid | Both choline figures low; pH lower; strong tartrate IR | Assay, pH, IR, tartrate test | Free choline | Both choline figures high; pH higher; assay may exceed 100.5% | Assay, pH, IR, tartrate test The first two rows are salt substitutions, caught by chloride, IR and tartrate tests. Dilution lowers both choline figures. Excess acid and free choline are process issues. A certificate that reports only choline misses all but the dilution; one that reports only the titration misses the chloride. ## Writing the proof into the specification A workable line: “Choline bitartrate, CAS 87-67-2, 96.5–100.5% as-is by titration, choline 40.5–41.5% by HPLC, IR against a choline bitartrate reference, loss on drying ≤1.0%, pH 3.0–4.5 (5%), ≥95% through 40 mesh, Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg, APC ≤1,000 cfu/g, yeast and mould ≤100 cfu/g, E. coli and Salmonella absent.” Add a chloride limit if the buyer needs to show the material is chloride-free; the catalog specification does not carry one. Add the tartrate test for a chemical confirmation of the anion. Name the titrant and endpoint, the HPLC column and detector, and the IR reference. A specification that says “choline 41%” can be met by a choline chloride blend; “assay 98%” without the salt or basis is not a grade. The release panel is on the COA page, the grade decision on the grade page and the direct comparison on bitartrate vs chloride. The methods are described in the FTIR method note and the HPLC method note; the catalog limits sit on the choline bitartrate product page. ## Five questions for a supplier First, which reference standard or monograph released the IR, and can the comparison be shown? Second, what were the titration and HPLC choline results for this lot, and do they agree? Third, was the titration calculated on the as-is or the dried basis, and what was the loss on drying? Fourth, is there a chloride test or limit, and has a tartrate identification test been run? Fifth, who manufactured the lot, and does the lot code match pack and retained sample? A supplier who answers all five has shown the salt; one who answers only choline has shown the nutrient. The release tests are on the COA page, the grade decision on the grade page, and the terms in the specification glossary entry. ### 02.1 Choline bitartrate vs chloride: choline content, hygroscopicity and the label URL: https://nutrition.rainwoodbio.com/products/vitamins/choline/grades/bitartrate-vs-chloride/ Reviewed: 2026-11-19 The two salts deliver different choline per gram: choline bitartrate is 40.5–41.5% choline in the catalog specification; choline chloride is about 74.6% at theoretical. The bitartrate is a crystalline, acidic solid; the chloride is deliquescent and often handled as a solution. A switch changes the weight per dose, water pick-up, assay method and label line, so it is a formulation change, not a purchasing substitution. In one linePer gram of choline, the bitartrate needs about 1.8 times the weight of the chloride, and the label has to say which salt supplied it. ## Two salts, one nutrient Choline is a cation; the salt is the counter-ion. Choline bitartrate is CAS 87-67-2, C9H19NO7, molecular weight 253.25. Choline chloride is CAS 67-48-1, C5H14ClNO, molecular weight 139.62. The catalog bitartrate is a white crystalline powder at 40 mesh, with loss on drying ≤1.0%, pH 3.0–4.5 in 5% solution, choline 40.5–41.5% by HPLC and assay 96.5–100.5% as-is by titration. The chloride is a different specification, and this catalog does not list it. Do not apply the bitartrate's moisture, pH or choline windows to the chloride: its water behaviour is worse, its pH is closer to neutral, and its choline figure is set by the supplier's grade. The nutrient name is choline; the ingredient names are the salts. A label that says only “choline” leaves the source unresolved. ## The conversion, and why the capsule changes The theoretical fractions are arithmetic: 104.17 ÷ 253.25 = 41.1% for the bitartrate, and 104.17 ÷ 139.62 = 74.6% for the chloride. At those figures, 100 mg of choline needs about 243 mg of bitartrate or 134 mg of chloride; 500 mg needs about 1,216 mg or 670 mg. Use the measured choline from the COA for the label, not the theoretical fraction. Choline delivered by salt weight · theoretical, at 41.1% and 74.6% | Salt weight | Choline from choline bitartrate | Choline from choline chloride | 250 mg | ≈103 mg | ≈186 mg | 500 mg | ≈206 mg | ≈373 mg | 1,000 mg | ≈411 mg | ≈746 mg For the same choline, chloride to bitartrate multiplies the weight by about 1.82; bitartrate to chloride multiplies it by about 0.55. A 500 mg bitartrate capsule carries about 206 mg of choline; the same fill of chloride would carry about 373 mg, but bulk density and deliquescence differ, so fill weight is not the only change. A 250 mg bitartrate capsule carries about 103 mg; to match it with chloride takes about 138 mg. The label makes the same point. “Choline bitartrate 500 mg” declares 500 mg of salt, about 206 mg of choline. “Choline 500 mg (as choline bitartrate)” declares 500 mg of choline, which needs about 1,216 mg of salt. Both can be true, but they are not interchangeable. ## Hygroscopicity is not the same on both sides Choline bitartrate is hygroscopic. The release limit for loss on drying is ≤1.0%; an open pack takes up water, cakes and falls in as-is assay even though the dry material is unchanged. Choline chloride is deliquescent: it can take up enough water to dissolve, which is why it is often supplied as a solution. For a dry blend, the chloride is harder to handle; for a liquid, the water is already in the formula. The pH difference matters in the matrix. The bitartrate gives a 5% solution at pH 3.0–4.5 and reacts with carbonate or bicarbonate in an effervescent system. The chloride is closer to neutral and fits there, but its water pick-up remains. The bitartrate grade is 40 mesh, with 80 mesh or granulation on request; finer powder cakes faster. The bitartrate needs a foil barrier, the chloride a tighter barrier or a liquid pack; do not assume the same shelf life. ## Which dosage form fits which salt Capsules and tablets. The bitartrate is the dry choice: crystalline, 40 mesh, acidic but workable. The chloride is deliquescent and sticky on a press; if it is used, control the room humidity and seal the pack. Sticks and drink mixes. The bitartrate dissolves freely but makes an acidic, tart drink. The chloride is closer to neutral and delivers more choline per gram, but picks up water; the foil barrier decides the label date. Liquids. The chloride is the practical choice: more choline per gram, a near-neutral solution and no tartrate. The chloride ion and the taste come with it. The bitartrate adds acidity and tartrate to a system that may not want either. Gummies, chewables and effervescent systems. Test both in the matrix. The bitartrate lowers pH and adds tartrate; the chloride adds chloride and is hygroscopic. In an effervescent tablet the bitartrate reacts with the carbonate, so start with the chloride and handle water pick-up in the pack. ## The label, the claim and the market The ingredient line names the salt, the nutrient line names choline: “Choline (as choline bitartrate)” or “Choline (as choline chloride)”. The label salt must match the certificate. In the United States, where choline is declared, the Supplement Facts panel uses a Daily Value of 550 mg for adults and children four years and older; 100 mg is 18% of that value, and the source line names the salt. In the EU and UK there is no choline NRV, so no percentage can be calculated. The label should declare choline per portion and name the salt. The EU and UK claim registers carry choline entries with a minimum of 82.5 mg of choline per portion; check the current wording, and do not use a claim because the ingredient is permitted. The claim is about choline, not the salt. The label arithmetic is the scale arithmetic: choline mg = salt mg × 0.411 for the bitartrate, or × 0.746 for the chloride. If the label declares both the salt weight and the choline figure, both must be true and clearly distinguished; the salt weight must not be presented as the choline amount. No market in this review offers a disease-related claim for a choline supplement. ## When to choose which Choose the bitartrate for a dry capsule or tablet, where the 40 mesh crystalline powder fits the process, the acid and tart note are acceptable, and the label must name choline bitartrate. Choose the chloride for a liquid or syrup, where a near-neutral pH matters, the higher choline per gram reduces the dose weight, the chloride ion is acceptable and the pack controls moisture. In a dry blend, use it only with a protected pack and a label that names choline chloride. Do not choose on the choline percentage alone: the salt changes the dose weight, water pick-up, assay method and label, and a switch needs a new specification, stability data, label and customer notification. If the formula cannot tolerate acid, choose the chloride; if the pack cannot exclude water, the bitartrate is easier but not immune; if the label must say bitartrate, only the bitartrate will do. The catalog limits are on the choline bitartrate product page, the wider grade comparison on the grade page, the release panel on the COA page, the water behaviour on the stability page and the market rules on the compliance page. ### 01 What the COA for lactoferrin actually contains URL: https://nutrition.rainwoodbio.com/products/protein-collagen/lactoferrin/coa/ Reviewed: 2026-11-19 A certificate for lactoferrin has to answer two questions a protein figure cannot: what the protein is, and how much iron it carries. The catalogue sets protein at ≥95.0%, iron saturation at 9.0–20.0%, moisture ≤5.0% and ash ≤1.5%, with identity by HPLC and ELISA. The batch COA confirms those figures for the lot that ships. In one lineA lactoferrin certificate is comparable only when the protein figure, the iron saturation and the identity tests each carry their method and their basis, and the lot number ties them to the drum. ## What the certificate lists The parameter list is short because the material is one protein rather than a family of related extracts. The certificate describes the powder, identifies the protein twice, and reports the composition around it. The table lists the catalogue parameters; each lot certificate prints the agreed limits again. COA parameter list · bovine lactoferrin, spray-dried, 80 mesh | Parameter | Method | Release limit | Appearance | Visual | Pinkish-white to light tan powder | Identification | HPLC retention and ELISA | Conforms to reference | Protein | Kjeldahl, factor stated | ≥95.0% | Iron saturation | Iron by ICP, calculated against binding capacity | 9.0–20.0% | Moisture and ash | Loss on drying; gravimetric, furnace | ≤5.0%; ≤1.5% | pH (5% solution) | Potentiometry | 5.5–7.0 | Particle size | Sieve | ≥95% through 80 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and enrichment | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent CAS 112163-33-4 identifies the glycoprotein, not the grade. The same number covers a low-iron powder and a saturated one, so the CAS is a starting point for identity, not a substitute for the iron figure. The species and the milk source belong on the certificate as words, because a transferrin from another species would share much of the chemistry and none of the label position. ## The basis behind the protein and the iron figure Kjeldahl returns nitrogen, then a factor converts it to protein. That factor is an agreed convention, not a measurement, and the certificate should print it together with the basis: as-is or dry. At the 5.0% moisture limit, a 95.0% dry-basis figure is about 90.3% on an as-is basis, so a specification that omits the basis leaves a five-point gap open. Peak-area purity is a third figure. An HPLC chromatogram can report the lactoferrin peak as 98% of total area while the nitrogen figure is 95%: one describes the ultraviolet signal in the main peak, the other the nitrogen the powder carries. Neither is wrong, and neither replaces the other. Iron saturation is the iron measured in the powder divided by the iron the protein could bind at full occupancy. Bovine lactoferrin binds two ferric ions per molecule of about 80 kDa, which puts full occupancy at roughly 1.4 mg of iron per gram of protein. The 9.0–20.0% band therefore spans about 0.13–0.28 mg of iron per gram. A percentage without the iron method and the capacity assumption cannot be recalculated. The denominator has to come from the same powder as the iron. If the protein is on a dry basis and the iron is not, the saturation shifts by the moisture content, and a purity figure swapped in for the protein figure moves it further. ## Catalogue range, release limit and what a lot reports The limit is the boundary a lot has to meet; the result is the value the laboratory found. A certificate that shows only one of the two leaves the buyer unable to check the other. “Conforms to specification”, with no number beside it, is an assertion rather than evidence. Some parameters describe the process rather than the purity. The pH of a 5% solution reflects the counter-ion and the residual milk salts, and the 80 mesh figure describes the milling: ≥95% through 80 mesh means particles mostly below about 177 µm, with a coarse tail that affects flow more than chemistry. What this page describes is the catalogue specification: the target the material is expected to hit. The COA that travels with a drum is the record for that drum. This site does not publish lot results, lot numbers or customer names. ## What moves between lots Iron saturation is the figure that moves most. It follows the iron load of the milk, the loading or stripping step the supplier applies, and the capacity assumption in the calculation. A lot at the bottom of the band and one at the top can both be released, and they will not look the same in a clear capsule: the more saturated powder is the deeper pink. Protein follows the isolation and the dryer. A lot can pass the nitrogen figure and still disperse more slowly than the approved sample if it has seen more heat. Moisture follows the dryer and the pack, and the 5.0% limit is a ceiling rather than a target. Colour and odour are the least quantitative signals and often the most useful: a lot that has seen more heat darkens and picks up a cooked note while the certificate still passes. ## When an outside test earns its place An independent test earns its place when the source has changed, when a first commercial lot is heading into a regulated market, or when the label rests on a figure the supplier's certificate does not establish. The panel worth ordering is narrower than the certificate: iron by ICP-OES or ICP-MS for the saturation calculation, HPLC against a reference standard, a species-specific ELISA, protein by Kjeldahl with the factor stated, and ICP-MS for the contaminants, all on one sample. A dispute is settled the same way. Send the retained sample, the certificate and the agreed specification to an independent laboratory, and ask for the tests that distinguish the possible explanations. The quality page explains how the batch file is stored with the retained sample. ## What to compare between suppliers Six lines belong side by side before anything else is compared: the identity method and its standard, the protein figure with its factor and basis, the iron saturation with its iron method and capacity assumption, the moisture and ash limits, the declared species and milk source with the allergen statement, and the mesh and pack. Two quotations that match on protein but diverge on the other five are describing different materials. Behind the certificate sits a record: the site that made the lot, the milk stream that went in, the drying and milling conditions, and the retained sample. A certificate can be truthful and still belong to a different drum. The number on the COA, the pouch and the retained sample has to be one number. The catalogue ranges sit on the lactoferrin product page; the iron-band choice is set out on the grade comparison page, the proof tests on the identity page, and the term itself in the COA glossary entry. The method is described in the HPLC method note. ### 02 Low-iron or iron-saturated lactoferrin: choosing a grade URL: https://nutrition.rainwoodbio.com/products/protein-collagen/lactoferrin/grades/ Reviewed: 2026-11-19 Lactoferrin is quoted in more than one iron-saturation band, and the band changes the colour, the iron carried per gram and the way the powder behaves in a hot process. The catalogue band is 9.0–20.0% iron saturation at protein ≥95.0%; a low-iron grade and a saturated grade can be agreed on request. The grade is a specification decision, not a different substance. In one lineThe grade is the iron saturation band, the protein figure and the physical form together; changing it changes the colour, the iron per gram and the evidence the stability file has to carry. ## Why there is more than one grade Bovine lactoferrin leaves the milk partly loaded with iron, and the natural spread is wide enough that a supplier has to set a band before the powder can be sold. The catalogue band of 9.0–20.0% brackets that spread and needs no loading or stripping step, which is why it is the default grade. The protein in it is the same protein that appears in the other two grades. A low-iron grade is agreed below the 9.0% floor. The supplier strips iron from the protein, and the certificate carries the lower limit that was agreed rather than the catalogue range. A saturated grade is agreed near full occupancy: the sites are loaded rather than emptied, and the certificate carries the higher figure the site can hold. Both are lactoferrin by identity, and both carry the same CAS number and the same milk allergen. The grade name is therefore a description of the iron load, not of the protein. A buyer who specifies only “lactoferrin” has specified the protein and left the iron band open, which is the parameter that most affects what the powder looks like and how it behaves in the process. ## What changes across the band Grade comparison · what the iron band changes | Point | Catalogue 9.0–20.0% | Low-iron, agreed | Saturated, agreed | Iron per gram | About 0.13–0.28 mg | Below the band | Above the band, toward 1.4 mg | Colour | Pinkish-white to light tan | Palest of the three | Deeper pink to tan | Heat behaviour | Partly loaded; intermediate | Least tolerant of heat | Most tolerant of heat | Solution | Clear to slightly hazy, pale pink | Paler; check haze | More colour; check haze | Iron on the label | Small and calculable | Smaller | Larger | Certificate line | 9.0–20.0% | Its own upper limit | Its own lower limit The heat row is the one that decides most processes. The apo form, with its sites empty, unfolds at a lower temperature than the loaded form; a low-iron grade sits closer to that end of the scale, so it is the least forgiving of a hot step and the saturated grade the most forgiving. That is a behaviour of the molecule, not a claim about what it does in the body, and it belongs in the process risk assessment rather than in the marketing copy. ## The physical form is the other half of the grade All three iron grades are spray-dried powders milled to ≥95% through 80 mesh, which puts most particles below about 177 µm. The fine powder blends well and fills capsules well, and it is also dusty and quick to pick up moisture, so the pack and the room humidity matter as much as the mesh. A granulated form can be agreed on request. Granulation changes the particle size, the flow and the dust, and it can change how the powder disperses in water; it does not change the iron saturation or the protein figure. If the application is a stick pack or a blend that must not segregate, the granulated form is worth asking about, and the certificate should still carry the same identity, protein and iron lines. ## The dosage form decides which grade fits A capsule is the simplest case. The fill weight is small, the powder is enclosed, and a clear shell shows the colour of the grade, which is why a capsule product often specifies the catalogue band and accepts the lot-to-lot colour drift that comes with it. A low-iron grade gives a paler shell; a saturated grade gives a deeper one. Neither changes the fill weight. A tablet needs flow and compression, so a granulated grade is more likely than a fine milled one, and the iron band is secondary to the granulation. A stick pack or a drink mix puts the powder in water, where the grade shows in the colour and the haze of the drink. A ready-to-drink product adds a heat step, and that is where the saturated grade earns its place: it tolerates the process better than the low-iron form. The form also sets the moisture protection. A foil pouch or a sealed stick keeps the 5.0% moisture limit; a capsule in a loose bottle does not, and the grade cannot compensate for a weak pack. ## What changing the grade changes in the file Switching the iron band changes four lines on the specification: the iron saturation limit and its method, the appearance wording, the calculated iron contribution per gram, and the stability data that has to be generated on the grade actually sold. It does not change the identity tests, the protein limit, the moisture and ash limits, the contaminant panel, the mesh or the milk allergen statement. The stability file is the line buyers forget. A shelf life generated on the catalogue band does not automatically transfer to a saturated grade, because the two forms behave differently under heat and moisture. The supplier should be able to say which grade was on stability and for which pack. The stability page sets out what the protocol has to cover. Write the grade into the product name on the purchase order, not only into a note. “Lactoferrin, iron saturation 9.0–20.0%, protein ≥95.0%” and “lactoferrin, low iron” are different specifications, and a certificate issued against the first will not support a label built on the second. ## When the catalogue band is enough Most dry blends and capsules do not need a special band. If the process has no hot hold, the pack keeps moisture out, and the label does not build a story on iron, the catalogue range gives the widest supply and the fewest qualification steps. A special grade adds a production step and a stability file, and it should be chosen because the process or the label needs it, not because it sounds more precise. For the arithmetic behind the percentage, see iron saturation in lactoferrin. The certificate lines are on the COA page, the label consequences are on the compliance page, and the catalogue ranges are on the product page. ### 03 Lactoferrin is heat-sensitive; the process and the pack decide the shelf life URL: https://nutrition.rainwoodbio.com/products/protein-collagen/lactoferrin/stability/ Reviewed: 2026-11-19 Lactoferrin is a folded protein, and heat and water are what unfold it. A dry powder held at ≤5.0% moisture can keep its specification for the shelf life assigned to the pack; a solution that sees a pasteurisation step or a long hold at neutral pH is a different problem. The process and the pack decide the shelf life, not the certificate. In one lineLactoferrin fails through heat and moisture before it fails on the protein figure, so the pasteurisation step, the water activity and the pack barrier are what set the shelf life. ## The dry powder Spray-dried lactoferrin leaves the dryer as an amorphous powder at ≤5.0% moisture, and in that state the protein is protected by the glassy matrix around it. The reactions that age it are slow: moisture uptake, caking, a slow drift in colour, and a loss of solubility that appears before any change on the protein line. The 5.0% limit is a ceiling on the certificate rather than a target. The powder is hygroscopic. An opened pouch in a warm room takes up water at the surface first, and the surface is where caking starts. A drum that has been opened and resealed several times can show lumps that were not there at release, and the certificate on the drum still describes the lot as it was packed. That is why the pack instructions and the storage condition belong in the stability file. ## In solution Lactoferrin dissolves in water to a clear to slightly hazy, pale pink solution, and the catalogue pH of 5.5–7.0 is measured on a 5% solution. In that range the protein is close to its most compact form and the iron is held on the binding sites. Heat above roughly 70 °C begins to unfold it; the exact point depends on pH, concentration, ionic strength and how much iron the protein carries. pH moves the stability in two directions. Below about pH 4 the protein stays soluble but releases its iron, so a low-pH drink protects the clarity and not the iron load. Near the isoelectric point, which for lactoferrin is in the basic range, solubility falls and haze rises, so a neutral formulation is harder to hold clear than an acidic one. A long hold at neutral pH before filling is the quiet failure mode: no heat step, no visible change, and a haze that appears in the finished bottle. Microbiology is the other limit on a solution. Lactoferrin is a protein and a nutrient, and a reconstituted tank is a good medium. The preservative system and the hold time are part of the stability question, not a separate quality topic. ## What actually moves the number Stability factors · what each one does and what controls it | Factor | What it does | What controls it | Heat | Unfolds the protein; loss of solubility and colour | Lower the temperature, shorten the hold, add after cool-down | Moisture | Caking, browning, faster denaturation on later heating | ≤5.0% at packing, foil barrier, desiccant where needed | pH | Iron release below pH 4; haze near the isoelectric point | Formulate acidic or well away from the isoelectric point | Oxygen and light | Colour fade and off-notes over months | Opaque pack, nitrogen flush where the pack allows | Shear | Foaming and surface denaturation at the air interface | Low-shear transfer, keep the tank covered | Metal ions | Competes for the binding sites and shifts the iron figure | Stainless steel contact, check the water and the other ingredients The order matters: a powder that has picked up moisture survives the following heat step less well, so the moisture limit protects heat tolerance as well as flow. ## The stability protocol A stability file for lactoferrin has three parts. The first is real time: the powder in its commercial pack at 25 °C and 60% relative humidity, tested at the start and at intervals through the assigned shelf life. The second is accelerated: the same pack at 40 °C and 75% relative humidity for six months, used to rank formulations and to catch a failing pack early. The third is a process challenge: the solution held at the real pasteurisation temperature for the real hold time, plus the reconstituted hold at the real pH. The test panel should follow the certificate: appearance, moisture, protein, iron saturation, pH, solubility and microbiology, with the iron figure included because a heat step can change the saturation reading even when the protein line holds. Colour belongs on the panel as a measured value or at least as a photograph against a standard, because the eye catches a drift that the other tests miss. Accelerated data does not replace real-time data. It can support a launch and it can justify a shorter shelf life, but the date on the lot has to rest on the pack that was actually tested. A stability file built on a 1 kg pouch does not automatically cover a 25 kg drum, because the drum has a different surface-to-volume ratio and a different opening history. ## What the formula and the process can do The first decision is where the lactoferrin goes into the process. Adding it after the heat step and after cool-down removes the heat load entirely, and it is the simplest change available. If the process cannot move, a saturated grade is the more heat-tolerant form of the same protein, and the grade page sets out what that switch changes. Granulation is a wet process followed by drying, so it adds a moisture cycle. A granulated grade can improve flow, but the granulation has to be validated on the protein, not only on the particle size. A direct-compression route with a fine milled powder avoids the water altogether and is often the simpler answer for a tablet. The pack is the last control and the one most often specified by habit. A 1 kg aluminium foil pouch is a strong moisture barrier; a 25 kg fiber drum protects the pouches inside it rather than the powder directly. The MOQ and packaging page describes the pack options, and the loss on drying entry explains how the moisture figure is obtained. ## How the shelf life is set The shelf life is assigned to a pack, a grade and a storage condition, and it is supported by the stability file for that combination. There is no single number that applies to every lactoferrin pack, and a supplier who quotes one without naming the pack has not answered the question. Ask for the pack, the grade, the storage condition and the test panel behind the date. After opening, the clock changes. The pouch has to be resealed or the powder transferred to a dry container, and the opened material is normally given a shorter working life than the sealed pack. The COA page shows which figures are re-checked at release, and the quality page describes how the retained sample supports a shelf-life claim after the fact. The catalogue ranges are on the product page. For the effect of the iron band on heat behaviour, see iron saturation in lactoferrin. ### 04 Lactoferrin: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/protein-collagen/lactoferrin/moq/ Reviewed: 2026-11-19 Lactoferrin starts at 1 kg in a foil pouch; production quantities leave in 25 kg fiber drums. The catalogue grade ships in 1–7 days, and a complete quotation answers six questions about the material and the documents before it names a delivery date. In one lineThe 1 kg pouch is the trial unit and the 25 kg fiber drum is the production unit; the catalogue grade ships in 1–7 days once the grade, the documents and the destination are agreed. ## Why the minimum is 1 kg Lactoferrin is a low-volume protein and the 1 kg pouch is the smallest unit that still carries a full batch record. It is large enough for a pilot blend, a capsule trial and a short stability study, and small enough that a formulator can qualify the material before committing to a drum. The minimum is not a marketing number: it is the smallest quantity that arrives with a lot record, a COA and a retained sample. The 1 kg pack is also the sample that gets tested. A buyer can run the identity panel, the iron saturation confirmation and a trial batch from the same pouch, and keep a retained portion for comparison with the production lot. The COA page lists the figures that should be checked on it. When the trial succeeds, the step to 25 kg is a scale change rather than a new material. ## The packaging Pack formats · what ships and what it protects | Pack | Net mass | Role | Aluminium foil pouch | 1 kg | Trial, sample and small production; moisture barrier | Fiber drum with food-grade liner | 25 kg | Production; protects the inner pouches and the lot label The pouch is the moisture barrier, and moisture is the parameter that ages the powder fastest. The drum protects the pouches inside it, carries the lot label and gives the pallet its stacking strength; it is not the barrier itself. A drum that has been opened and left open loses the protection the pouch was there to provide. Every pack carries the product name, the grade with its iron saturation band, the lot number, the net mass, the storage condition and the shelf life. The lot number on the pack has to match the number on the COA and on the retained sample; if the three do not match, the documentation does not describe the drum. The stability page explains why the pack, not only the powder, is part of the shelf-life claim. ## Lead time and what moves it The catalogue grade ships in 1–7 days from the order. The range covers the difference between a lot in stock and a lot that has to be pulled, labelled and documented before dispatch. It does not cover a custom grade. A low-iron or saturated grade is a production step on top of the standard isolation, and a granulated grade is a separate milling and drying pass. Those are quoted with their own date, which is confirmed when the order is placed rather than assumed from the catalogue range. The same applies to a pack other than the two standard formats. Ask for the date in writing before the launch plan depends on it. The documents travel with the lot and are part of the lead time. A COA issued after dispatch is a document that arrives too late for a release decision, so the certificate, the specification and the allergen statement should be confirmed as ready before the goods leave. ## What a quotation has to answer Six points make a lactoferrin quotation usable. Without them the buyer is comparing a product name and a number of kilograms. - Grade and iron band. The catalogue 9.0–20.0%, or a low-iron or saturated grade with its own limit. - Protein and the two methods. The protein figure with its factor and basis, and how identity and iron saturation are measured. - Quantity and pack. 1 kg pouch, 25 kg drum, or a stated alternative. - Destination and Incoterm. The delivery point decides the paperwork and the freight, and it is not implied by the country name. - Documents. COA, specification, TDS, allergen statement, origin and species declaration, and any statement the customer's market requires. - Date and remaining shelf life. The requested delivery date and the shelf life left at dispatch, because a lot with a short remainder is a different offer. A quotation that gives a mass and a product name has answered one of the six. The compliance page lists the documents that a regulated market will ask for. ## Samples before the drum The 1 kg pouch serves as the sample for most projects. It is enough for a trial batch and for the tests that decide whether the grade is right, and it is drawn from a documented lot rather than mixed for the occasion. Test the sample on the parameters that the process will stress: identity, protein, iron saturation, moisture, solubility and colour. A sample that passes the certificate but disperses poorly in the real matrix has still failed the trial. Keep the retained portion, because the comparison with the first production lot is where most disputes are settled. ## The terms around the order The commercial terms are agreed per quotation: the Incoterm, the payment terms, the documents included, the claims window and the retained sample. The claims window should be long enough to test the lot on arrival, and it should name the sample that will be used if the result is disputed. A window that expires before the container is opened is not a window. The shelf life at dispatch belongs in the terms as well. A lot can be within its assigned shelf life and still have too little remaining for a product that will sit in a warehouse and then on a shelf. State the minimum remaining life in the purchase order, not in an email after delivery. Commercial figures are quoted per order, not published on this page. For the minimum in context, see the MOQ glossary entry, and for the timing, the lead time entry. The grade itself is described on the grade comparison page, and the catalogue ranges are on the product page. ### 05 Where lactoferrin is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/protein-collagen/lactoferrin/compliance/ Reviewed: 2026-11-19 Bovine lactoferrin reaches the EU, the US and the UK as a food supplement ingredient, and the permission itself is usually settled well before a purchase order. What decides a launch is the file that travels with the lot: the milk allergen, the contaminant panel, the label and claim wording, and the documents that name the bovine source. In one lineBovine lactoferrin is sold in the EU, the US and the UK as a food supplement ingredient; what decides the launch is the milk allergen, the contaminant panel and the documents that name the bovine source. ## The three frameworks The three markets do not ask the same question. In the EU, a lactoferrin for food supplements sits under Directive 2002/46/EC and the general food law around it, and the practical question is whether the material is authorised or has a history of use. In the US, it is a dietary supplement ingredient under DSHEA, and the question is whether it was marketed before 1994, whether it is covered by a GRAS conclusion for the intended use, or whether it has a new dietary ingredient notification. In the UK, retained food supplements legislation applies with its own amendments, and the EU-derived allergen and contaminant rules still shape the file. For a specific isolate, check the current EU novel food catalogue and the supplier's regulatory basis rather than assuming that a protein with a long history in milk is outside the novel food regulation. The isolate, the production process and the intended use are what the assessment looks at, and the position can change. This page describes the framework as of this review; the current text of each instrument decides. ## The European Union Lactoferrin is not a vitamin or a mineral, so the Annex I list of permitted nutrient sources in Directive 2002/46/EC does not decide whether it can be used. The food ingredient route does, together with the novel food status of the specific material. The supplier should be able to state which route the material is sold under and which documents support it. Milk is in Annex II of Regulation 1169/2011, so the word milk has to appear in the ingredient list, emphasised, and a “may contain” statement is not a substitute for declaring an ingredient that is present. Regulation 2023/915 sets the contaminant limits, and Regulation 1924/2006 governs any claim made for the finished product. The EU regulatory note carries the current references. ## The United States A dietary supplement containing lactoferrin is made under 21 CFR 111 and labelled with a Supplement Facts panel, and it carries the milk allergen declaration required by FALCPA. Milk is a major food allergen, so the “Contains” statement or the ingredient-list emphasis has to name it; a supplier's allergen statement should match the label wording the customer will use. The ingredient basis is the part buyers miss. A pre-1994 dietary ingredient, a GRAS conclusion for the intended use and an NDI notification are three different routes, and the customer's own filing depends on which one applies. The supplier should say which, in writing. Proposition 65 is a separate exposure warning that can apply to lead even where the federal rules do not set a limit. The US regulatory note sets out the route in more detail. ## The contaminant limits Contaminant and microbiology limits · catalogue values against the market reference | Parameter | Catalogue limit | Reference | Lead | ≤3 mg/kg | EU 3.0 mg/kg for food supplements; US Prop 65 | Arsenic | ≤2 mg/kg | No harmonised EU supplement limit; member-state rules | Cadmium | ≤1 mg/kg | EU 1.0 mg/kg for food supplements | Mercury | ≤0.1 mg/kg | EU 0.10 mg/kg for food supplements | Total aerobic count | ≤1,000 cfu/g | Contractual; no harmonised EU supplement limit | Yeast and mould | ≤100 cfu/g | Contractual release criterion | E. coli | Absent | Contractual release criterion | Salmonella | Absent | Contractual release criterion The catalogue limits are the values the certificate is written against. The heavy-metal limits sit at the EU maximum levels for food supplements, which means a lot that meets the catalogue limit is at the line rather than below it; a customer who wants margin should specify a tighter internal limit. Microbiology for food supplements is not harmonised in the same way, so the counts are contractual and belong in the specification. The heavy metals glossary entry explains how the panel is reported. ## Where the claims stop In the EU, a health claim may be used only if it is in the authorised register under Regulation 1924/2006, and the wording and the conditions of use have to match the entry. A structure or function claim that is not authorised is not made permissible by adding a disclaimer. In the US, structure or function claims are allowed with the DSHEA disclaimer, and disease claims are not allowed at all. The UK applies retained equivalents. This site makes no physiological claim for lactoferrin. The pages describe identity, composition, process behaviour and documents, and a finished product that carries a claim needs its own substantiation and its own review. The label term “iron saturation” is a specification term rather than an authorised claim, and it should be defined on the specification so that the number on the pack and the number on the certificate mean the same thing. ## The documents a file needs - The specification, with protein, iron saturation, moisture, ash, pH, mesh, metals and microbiology, each with its method. - The batch COA for the lot, with the same parameter set and the lot number. - The technical data sheet and the storage and shelf-life statement for the pack. - The milk allergen statement, matching the label wording used in the destination market. - The origin and species declaration: bovine, and the milk source. - A TSE/BSE statement covering the bovine source, even though milk is not a specified risk material. - The contaminant and microbiology reports, and a stability summary for the grade and pack sold. - A third-party report where the customer's market or own procedure requires one. ## The release checklist - Does the COA name the lot, the grade and the iron saturation band? - Is the protein figure accompanied by its factor and basis? - Is the iron saturation accompanied by the iron method and the capacity assumption? - Does the allergen statement name milk in the wording the label will use? - Do the heavy metals sit inside the catalogue limits, and does the customer want a tighter internal limit? - Is the ingredient basis for the destination market stated in writing? - Do the pack, the COA and the retained sample carry the same lot number? The MOQ and ordering page shows how these documents attach to an order, and the identity page shows which tests support the source statement. The UK position is summarised in the UK regulatory note, and the catalogue is on the product page. ### 06 How we prove a lactoferrin lot is bovine lactoferrin URL: https://nutrition.rainwoodbio.com/products/protein-collagen/lactoferrin/identity/ Reviewed: 2026-11-19 Four measurements have to line up before a powder can be sold as bovine lactoferrin: an HPLC retention time that matches the reference, an ELISA response specific to the bovine protein, a protein figure with its method, and an iron saturation that fits the stated grade. The milk source is a fifth, declared fact rather than a test. In one lineA bovine lactoferrin claim rests on four measurements that have to agree: the HPLC retention time, the ELISA response, the protein figure and the iron saturation, tied to a declared milk source. ## The four layers The first layer is the chromatogram. A reversed-phase or size-exclusion HPLC run against a reference standard gives the lactoferrin peak a retention time and a shape, and a lot that is not lactoferrin does not reproduce them. The chromatogram also shows what else is in the powder: a second protein peak, a salt peak, or a baseline that suggests the column was overloaded. The second layer is the immunoassay. An ELISA built on antibodies raised against bovine lactoferrin gives a signal that is specific to the protein and, in a sandwich format, to its intact structure. It is the layer that separates bovine lactoferrin from a lactoferrin of another species, which chromatography alone may not do. The third layer is the protein figure, and it is only a layer when the method, the factor and the basis are printed beside it. Kjeldahl nitrogen, peak-area purity and a UV protein assay are three different measurements, and a certificate that does not say which one it used has not described the protein. The fourth layer is the iron saturation. It does not prove the protein is lactoferrin, but it proves that the powder is the grade the certificate claims. A saturated grade sold as a low-iron one, or the reverse, is a specification failure that the identity tests alone will not catch. ## The two figures that have to agree Protein and iron saturation are a ratio, and the ratio is a stronger identity check than either figure on its own. Bovine lactoferrin binds two ferric ions per molecule of about 80 kDa, so full occupancy is roughly 1.4 mg of iron per gram of protein. At the catalogue band of 9.0–20.0%, the powder therefore carries about 0.13–0.28 mg of iron per gram of protein. A lot that reports 95% protein and an iron figure far outside that arithmetic is either not the grade it claims or not the protein it claims. A lot diluted with a non-iron-binding protein keeps its protein figure and loses iron; a lot loaded beyond its declared band gains iron and keeps its protein. Neither shows up if the two figures are read separately, which is why both belong on the same certificate and in the same review. The protein figure itself has a ratio behind it. The nitrogen result and the peak-area purity should be consistent: a powder that reads 98% by peak area and 80% by Kjeldahl has a discrepancy that needs explaining, and a powder that reads 95% by both has two independent measurements pointing the same way. The COA page sets out how each figure is reported. ## What diffraction and infrared can add Spray-dried lactoferrin is amorphous, so an X-ray diffraction scan is a broad halo with no sharp reflections. That halo is a positive sign of the process: a powder with sharp reflections contains a crystalline phase, which in this material is more likely a crystalline diluent or a salt than the protein itself. The scan is a quick check on the process and on storage damage, not a species test. Infrared spectroscopy shows the protein backbone through the amide I and amide II bands and can confirm that the powder is a protein rather than a carbohydrate or a salt. It cannot tell bovine lactoferrin from another lactoferrin, and it cannot quantify the protein. The FTIR method note and the HPLC method note describe what each technique can settle. ## The routes that are actually used Adulteration routes · what changes and which test catches it | Route | What it changes | Test that catches it | Whey or milk protein added | Protein stays high, iron saturation falls, HPLC shows extra peaks | HPLC profile, iron saturation against protein | Lactoferrin of another species | Chromatogram may be close; antibody response differs | Species-specific ELISA | Low-iron sold as saturated | Colour paler, iron per gram below the declared band | Iron by ICP against the certificate | Dilution with maltodextrin | Protein and iron both fall, ash and moisture move | Protein, iron, ash, moisture, HPLC | Nitrogen spiking | Kjeldahl up, HPLC peak area unchanged | Nitrogen against peak-area purity, melamine screen | Re-labelled lower grade | Certificate and pack disagree on the band | Lot number trace, iron figure, retained sample The first three routes are the commercial ones, and none of them is a safety event. They are substitutions: a different milk protein, another species or another iron load sold as the declared material. The nitrogen-spiking route is the safety one, and it is the reason a protein figure without a chromatogram is weak evidence. The grade page explains why the iron band is a grade parameter rather than an identity test. ## What to write into the specification - The name, the source and the CAS number: bovine lactoferrin, milk source, CAS 112163-33-4. - Identity by HPLC against a reference standard and by a species-specific ELISA, with the standard named. - Protein ≥95.0% with the factor and the basis, and the method that produced it. - Iron saturation 9.0–20.0%, with the iron method and the binding-capacity assumption. - Moisture, ash, pH, mesh, heavy metals and microbiology as release limits. - The milk allergen statement and the bovine origin declaration. An identity specification that lists only protein, moisture and ash describes a white powder, not lactoferrin. The product page carries the catalogue ranges that a specification starts from, and the compliance page shows where the allergen and origin statements sit in the file. ## Five questions for a supplier - Which reference standard was used for the HPLC, and can you send the chromatogram for the lot? - Which ELISA format was used, and what does the dilution curve look like at the working range? - How is iron saturation calculated — which iron method, and what binding capacity per gram of protein? - What is the milk source and the species, and which document states it? - Can the retained sample be traced to the lot number on the pouch and the COA? None of these questions is unusual, and a supplier who cannot answer them is describing a material rather than documenting one. The retained sample entry explains why the fifth question matters as much as the first four. ### 02.1 Iron saturation in lactoferrin: what the percentage changes URL: https://nutrition.rainwoodbio.com/products/protein-collagen/lactoferrin/grades/iron-saturation/ Reviewed: 2026-11-19 Iron saturation is the share of lactoferrin's iron-binding sites that carry iron. At about 80 kDa with two binding sites per molecule, full occupancy is roughly 1.4 mg of iron per gram of protein, so the catalogue band of 9.0–20.0% corresponds to about 0.13–0.28 mg of iron per gram. The percentage changes the colour, the iron contributed per gram and the heat behaviour of the powder. In one lineIron saturation is the share of the protein's binding sites that carry iron, and it changes the colour, the iron per gram and the heat behaviour before it changes the protein figure. ## What the percentage means The figure is a ratio with no unit: iron found on the protein divided by the iron the protein could hold at full occupancy, expressed as a percentage. The numerator is an iron measurement. The denominator is a calculation from the protein figure, the molecular mass and the number of binding sites. Neither part is read directly from the powder, and a certificate that gives only the percentage has given a result without its arithmetic. The mass matters because the protein is large. Bovine lactoferrin is about 80 kDa and binds two ferric ions, so one gram of pure protein carries about 1.4 mg of iron when every site is filled. At 100% saturation the powder would be 0.14% iron by mass, which is why a fully saturated grade is still a protein product rather than an iron supplement. The catalogue band sits at roughly a tenth to a fifth of that load. The basis matters as much as the mass. Saturation calculated against protein on a dry basis and saturation calculated against the same protein on an as-is basis differ by the moisture content. The 5.0% moisture limit moves the figure by a few tenths of a point: small beside the band, not beside a claim that a lot sits at a precise number. ## How the figure is measured The iron is measured first, usually by ICP-OES or ICP-MS after digestion. The result is reported as mg of iron per kg of powder or per gram of protein. The saturation is then calculated from the protein figure, the assumed molecular mass and the two binding sites. Two laboratories can measure the same powder and report different saturations if they assume different binding capacities or use different protein bases. The protein figure behind the calculation has to be the same one printed on the certificate. If the iron is measured on the powder as received and the protein is a dry-basis figure, the ratio carries the moisture difference. If the protein is a peak-area purity rather than a Kjeldahl figure, the denominator describes a different quantity. Ask for the calculation, not only the result. Measured iron includes iron that is not on the protein, from residual salts or a contaminant. The calculation counts all of it as bound, which is one reason the percentage needs its method and its tolerance. A thorough method digests the whole sample and reports total iron. ## What the percentage changes Iron saturation · what moves with the band | Property | Low saturation | High saturation | Colour | Paler pink to off-white | Deeper pink to light tan | Iron per gram of protein | Toward zero | Toward about 1.4 mg | Heat behaviour | Unfolds at a lower temperature | More resistant to heat | Solution colour | Faint pink | Stronger pink; check haze | Certificate line | Own upper limit | Own lower limit The colour difference is visible in a clear capsule and in a pale drink, and it is the first thing a buyer notices when a grade changes. The heat difference is the first thing the process notices: the iron-free form of the protein is less stable, so a low-iron grade put through the same pasteurisation step as a saturated grade will lose solubility sooner. Neither difference is a change in the protein figure, which is why a certificate can look unchanged while the powder behaves differently. Solubility is the property most often assumed to be constant and least often checked. Both forms dissolve, but the saturated powder carries more colour into the solution and can show more haze at the same concentration. A grade switch should be followed by a clarity check in the real matrix, not only by a certificate review. ## How the grade is made Bovine lactoferrin is isolated from milk or the whey stream, usually by a chromatography step that takes advantage of the protein's basic charge. The iron load that arrives with the raw material is the starting point. A low-iron grade is made by stripping iron from the protein, typically at low pH with a chelating agent, and then removing the agent and drying the protein. A saturated grade is made by loading ferric iron onto the binding sites before drying. Both steps change the powder and neither changes the protein sequence. The process is part of the grade definition, because a supplier who strips iron and one who loads it are selling different specifications from the same starting material. The process belongs in the supplier file, and a change of process is a change of grade even when the certificate band looks similar. ## What it means for the label The iron carried by the protein is part of the ingredient rather than an added nutrient, but the quantity is calculable and a product that makes an iron statement should show the arithmetic. One hundred milligrams of powder at 95% protein and 20% saturation carries about 0.03 mg of iron, roughly 0.2% of the 14 mg EU reference intake for iron. The same mass at full saturation would carry about 0.13 mg, just under 1%. Those figures explain why lactoferrin is not usually a meaningful iron source on the label, and why a saturated grade does not turn a protein ingredient into an iron supplement. The grade name still belongs on the specification and, where the label builds a story on it, on the pack. “Iron saturation” is a specification term, not a standardised label term in every market, so the number has to be defined where it is used. ## When to choose which Choose the catalogue band for a dry blend or a capsule with no hot step, no iron statement and a pack that keeps moisture out. It is the widest specification and the least likely to need a new stability file. Choose a low-iron grade when the palest colour matters, when the iron contribution has to stay at the bottom of the range, or when the process is mild enough that the lower heat tolerance is not a risk. Choose a saturated grade when the process includes a heat step that cannot be moved, or when the deeper colour is the point of the product. The decision is a specification decision, and it should be written into the purchase order with its limit and its method. The grade comparison page sets out what else changes with the grade, the stability page covers the heat and moisture side, and the COA page shows how the figure appears on the certificate. The catalogue ranges are on the product page. ### 01 What the COA for pea protein isolate actually contains URL: https://nutrition.rainwoodbio.com/products/protein-collagen/pea-protein-isolate/coa/ Reviewed: 2026-11-19 Three groups of numbers decide what a pea protein isolate certificate means: the protein figure with its nitrogen factor and basis, the moisture, ash and fat that make up the rest of the powder, and the contaminant and microbiology results that release the lot. The catalogue sets the windows; the batch certificate reports what the drum measured. In one lineA pea isolate certificate is only complete when the protein figure carries its nitrogen factor and dry basis, and the moisture, ash and fat limits sit beside the lot results they qualify. ## What the certificate reports Pea protein isolate is not a single molecule, so CAS 90082-22-5 identifies the material rather than an assay. The certificate describes the powder: the protein, the water, mineral and fat beside it, its behaviour in suspension, and the contamination tested. The limits below are the catalogue values; each shipment repeats them against the result for that drum. COA parameter list · pea protein isolate, catalogue specification | Parameter | Method | Release limit | Appearance | Visual | Light yellow to cream powder | Protein | Kjeldahl, N × 6.25 | ≥80.0% (dry basis) | Moisture | Loss on drying | ≤8.0% | Ash | Gravimetric, furnace | ≤5.0% | Fat | Solvent extraction | ≤2.0% | pH (5% suspension) | Potentiometry | 6.0–8.0 | Particle size | Sieve | ≥95% through 80 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and enrichment | APC ≤10,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent Source is part of the description even when it yields no number. The certificate should name yellow pea (Pisum sativum) seed and the process, because a concentrate made by air classification is a different ingredient. The identity page sets out how that claim is tested. ## The nitrogen result and its multiplier Kjeldahl measures nitrogen, and 6.25 is the general food factor used here: it assumes nitrogen is 16% of protein. An 80.0% dry-basis figure therefore corresponds to about 12.8% nitrogen. The multiplier is an agreed convention rather than an analytical result; a certificate that leaves it out, or leaves out the basis, cannot be set beside one that names both. The denominator is the other half of the figure. The 8.0% moisture limit keeps water out of it. At that limit, 80.0% dry basis is 73.6% as-is, because 8% of the powder is water. Mix the two bases on a label or a purchase order and the figure is out by 6.4 points before any laboratory variation enters. Ash at ≤5.0% and fat at ≤2.0% are not side issues. Ash covers the minerals left by extraction and neutralisation, fat covers the residual oil, and both dilute the protein when they rise. A lot at 80.0% protein with 5.0% ash and 2.0% fat is a different powder from one at 85% protein with the same ash and fat, though both can meet a specification written as “80% pea protein”. ## Limit, result and what a pass means A release limit is the boundary the specification draws; a lot result is the number the bench returned for that drum. “Conforms to specification” is a verdict with no figures attached. The useful line prints the limit, the result, the method and the test date together, and for protein it also shows the nitrogen result so the arithmetic can be checked. Particle size is a case in point: the ≥95% through 80 mesh figure is a pass or fail gate, while the distribution behind it is a description, and two lots that pass the sieve can still differ in dust, flow and wetting. pH 6.0–8.0 in a 5% suspension is a gate on the process. Heavy metals at Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg, and microbiology at APC ≤10,000 cfu/g with E. coli and Salmonella absent, are release gates rather than targets. Everything here describes the catalogue, not a production run. The certificate is what turns those ranges into a statement about one drum, and this site does not reproduce a lot result, a batch number or a customer. The COA glossary entry defines the document. ## Why lots differ Pea protein moves between lots for reasons mostly upstream of the dryer. Variety, growing season and soil decide the protein and the mineral load in the seed. Extraction pH, wash steps and the precipitation point decide how much ash and fibre travel with it. Drying temperature and residence time decide colour and how much powder passes 80 mesh. A floor at 80.0% leaves room for the lot to sit above it; the certificate result shows where. Colour drifts with season and drying, and the appearance line is written broadly for that reason. Dispersibility and taste move too, and neither is fully captured by the certificate, which is why the retained sample matters when a lot behaves differently in the trial. ## When an outside test is worth it Bring in an outside laboratory when the supplier is new, when the first commercial lot is entering a regulated market, or when the label makes a statement the certificate cannot prove. The tests should close the open question, not duplicate the certificate: the amino acid profile and a non-protein nitrogen check for identity, PCR or ELISA for soy, wheat and other legumes, ICP-MS for the four metals, and a plate count for microbiology. A dispute is settled the same way: send the retained sample, the certificate and the agreed specification, and ask for the tests that narrow the explanation. A protein result alone will not say whether a low figure came from the raw pea, from over-washing or from a blend. The quality page covers the batch file and the ICP-MS method note the metal panel. ## Six lines to compare An offer is comparable only when six lines are on the table: the protein figure with its factor and basis, the moisture, ash and fat limits, the particle size and method, the allergen statement for pea and for any shared line, the origin and process, and lot traceability from certificate to drum to retained sample. Agreement on “80% protein” with disagreement on the other five lines means the two offers are for different materials. The paperwork has a second layer: which site made the lot, which pea batch went in, which extraction and drying conditions applied, and what sample was retained. The certificate can be genuine and still belong to another drum; the lot number has to match on the COA, the pack and the retained sample. The ranges are on the product page; the grade decision is on the grade comparison, and the tests that prove the material are on the identity page. ### 02 Pea isolate or concentrate: choosing a pea protein grade URL: https://nutrition.rainwoodbio.com/products/protein-collagen/pea-protein-isolate/grades/ Reviewed: 2026-11-19 Pea protein isolate and pea protein concentrate start from the same yellow pea and are separated to different points. The grade fixes the protein floor and what remains beside it — fibre, starch, ash and fat — and those decide the dose, the colour and the ingredient name. The protein number is the headline, not the whole specification. In one lineThe grade is the protein fraction plus what remains beside it — fibre, starch, ash and fat — not the concentration number on the label. ## Why one name covers more than one powder Milled pea flour carries roughly a fifth to a quarter of its weight as protein, with starch and fibre making up most of the rest. A concentrate raises that to a typical 50–60% by removing some of the starch and fibre, either by dry milling and air classification or by a shorter wet extraction. An isolate goes further: the protein is dissolved at alkaline pH, precipitated near its isoelectric point, washed, neutralised and spray-dried to a floor of 80.0% on a dry basis. “Pea protein” on a label is therefore a family name. There is no standard of identity that fixes what it must contain in the EU or the US, so the specification does that work. Two suppliers can both sell “pea protein” and deliver materials that differ by thirty points of protein, by the fibre they carry and by the colour of the powder. ## Isolate and concentrate compared Pea protein isolate and concentrate · catalogue limits and typical values | Point | Pea protein isolate | Pea protein concentrate | Protein, dry basis | ≥80.0% (N × 6.25) | Typically 50–60% | Protein, as-is at 8.0% moisture | 73.6% at the floor | Roughly 46–55% | Fibre and starch | Largely removed; a residual fraction remains | Retained; the main non-protein solids | Ash | ≤5.0% | Process-specific; not a reliable marker | Fat | ≤2.0% | Process-specific; not fixed by the grade name | Process | Alkaline extraction, isoelectric precipitation, wash, spray dry | Dry milling and air classification, or a shorter wet extraction | Colour and flavour | Light yellow to cream; milder | Deeper colour; more green and earthy notes | Usual fit | High-protein claims, white powders, bars | Bakery, snacks, protein-enriched foods The protein gap is the first commercial fact. At the 8.0% moisture limit, the isolate delivers 73.6 g of protein per 100 g of powder; a concentrate at 55% dry basis delivers about 50.6 g. That is a difference of 23 g of protein per 100 g, and it is paid for in powder weight at the dose. The fibre and starch gap is the second. The isolate has removed most of the material that is not protein, but not all of it: the carbohydrate by difference at the catalogue limits is about 11.4% as-is (100 − 73.6 − 8.0 − 5.0 − 2.0), and that fraction includes any residual fibre and sugars. A concentrate carries more of both. Ash is not a reliable way to tell the grades apart, because neutralisation and washing can leave an isolate with as much ash as a concentrate; the isolate here is simply capped at 5.0%. ## What changes in the powder Both grades are milled powders, but the isolate is specified at ≥95% through 80 mesh. That is a sieve gate, not a description of particle shape. An agglomerated or instantized version can be requested; agglomeration builds larger porous clusters that wet faster and make less dust, at a lower bulk density, which changes how the powder fills a sachet. Pea protein is hygroscopic in either grade. The isolate at ≤8.0% moisture is free-flowing in a sealed pack, but it takes up water in a humid filling room and cakes; the concentrate carries more fibre and starch, which changes water binding and flow. Colour and flavour separate the two more sharply than the certificate does: the isolate is light yellow to cream and comparatively mild, while a concentrate is usually deeper in colour with more green and earthy notes. ## What changes at the dose Dose arithmetic starts from as-is protein, never from the dry-basis figure. To deliver 20 g of protein at the limits, the isolate needs 20 ÷ 0.736 = 27.2 g of powder. A concentrate at 55% dry basis and 8% moisture needs 20 ÷ 0.506 = 39.5 g. The extra 12 g carries the fibre, ash and fat, and the formula has to absorb them. At those weights the isolate serving carries at most 1.36 g of ash and 0.54 g of fat; the concentrate's figures depend on its own specification. A 25 g scoop of the isolate at 73.6% delivers 18.4 g of protein, not 20 g. A label built on powder weight rather than protein will miss the panel, so any serving meant to hit a protein claim has to be calculated from the as-is value. ## What the specification has to fix - The grade and the process: pea protein isolate, alkaline extraction and isoelectric precipitation, spray-dried, 80 mesh. - Protein, with the factor and basis stated: at least 80.0% by Kjeldahl on a dry basis, N × 6.25. - Moisture, ash and fat as limits rather than typical values, because these separate one supplier's isolate from another's. - Particle size and the test method, plus agglomeration or instantizing if the filling line needs it. - The allergen statement: pea is a legume, and the declaration and cross-contact controls have to travel with the grade. The COA page shows where these lines sit on a certificate and what a lot result adds. ## When the other grade is the wrong fit The isolate stops being the right choice when the formula wants fibre and starch for texture, when a lower protein density is enough for the claim, or when the deeper colour and earthy flavour of a concentrate fit the matrix. The concentrate is the wrong choice when the serving cannot carry 39 g of powder, when the powder has to be white, or when the fibre and starch would push a carbohydrate or fibre panel past what the label promises. The product name does not decide it; the dose, the matrix and the label do, and those belong in the specification. For the choice between pea and soy at the same isolate grade, see pea versus soy. The compliance page covers how the grade is declared, and the product page carries the catalogue limits for the isolate. ### 03 Pea protein isolate is stable dry; moisture and heat decide the rest URL: https://nutrition.rainwoodbio.com/products/protein-collagen/pea-protein-isolate/stability/ Reviewed: 2026-11-19 Pea protein isolate is a dry powder, and in a sealed pack its protein does not degrade at ambient temperature. What limits the shelf life is everything around the protein: moisture taken up from the headspace, heat, and the small amounts of sugar, fat and mineral that sit in the same particle. Caking, colour and flavour move before the protein figure does. In one lineDry pea isolate holds its protein; moisture, heat and the sugars left in the powder set the shelf life. ## The powder in the drum At ≤8.0% moisture the powder is a free-flowing solid, and the water activity is low enough that microbial growth is not possible. The protein is stable; the physical state is not. Pea protein is hygroscopic, and the powder pulls water from the headspace until particles stick and then cake. Above roughly 50–60% relative humidity at room temperature the uptake is fast enough to show within weeks, and a drum that was inside the limit at fill can be outside it after a humid month. The changes to watch are dispersibility, colour and flavour. The powder loses its free flow and disperses more slowly, and a drink made from it can carry a skin on the surface; the colour drifts from light yellow to tan; the green, earthy note strengthens. Available lysine can fall if reducing sugars and heat are present. The protein figure itself is the last number to move, which is why a certificate alone does not describe the storage history. ## Once water is added In water the isolate disperses to an opaque suspension. It does not form a clear solution, and it does not need to for a shake or a bar. The isoelectric point is around pH 4.5–5.0, where solubility is lowest and sediment most likely; at pH 6.0–8.0 the powder is more stable in suspension. Heat above about 70 °C denatures the protein and can thicken or gel a concentrated solution, so a ready-to-drink line needs a heat process designed around the protein rather than a pasteurisation step borrowed from a juice line. Once reconstituted, the liquid is a microbial growth medium. Its shelf life is set by the heat process, the pH, the preservative system and the chill chain, not by the powder's certificate. A chilled drink with a short date and a retort-stable one are two formulations of the same powder. ## What drives the change Stability factors · pea protein isolate powder and reconstituted suspension | Factor | What happens | Control | Relative humidity | Moisture uptake, caking, colour drift | Sealed liner, dry store, reseal after opening | Temperature | Faster browning, lower solubility, sticking | Below 25 °C, away from walls and roofs | Oxygen | Residual fat oxidation, off-flavour | Low headspace, nitrogen flush | Light | Colour fade and oxidation | Opaque or light-blocking pack | Metal contact | Iron and copper catalyse oxidation | Stainless contact surfaces | Time in solution | Microbial growth, gelation on heat | Chilled holding, defined hold time The powder's own fat limit is low at ≤2.0%, so rancidity is a slower risk than moisture. It is still a risk: a drum stored warm for a long period can develop a painty note before any chemical figure moves. The microbiology method note covers the other side of the same storage question. ## How the study is run The study has two arms. Real time is 25 °C and 60% relative humidity in the commercial pack, sampled at 0, 3, 6, 12, 18 and 24 months. Accelerated is 40 °C and 75% relative humidity, sampled at 0, 1, 2, 3 and 6 months. The hot condition exposes weaknesses early, but only the real-time set can assign a shelf life. The tests should track the failure modes rather than repeat the certificate: moisture and water activity first, then colour measured instrumentally, then protein, pH and dispersibility. Microbiology and a sensory check close it. Protein is included to confirm that the figure holds, not because it is expected to fall. ## Matrix and pack The matrix carries part of the powder's stability into the finished product. A sugar-free stick pack is almost the raw material in a smaller bag. A bar adds humectants such as glycerol, sorbitol or invert syrup, which lift the water activity around the protein and push browning at ordinary temperature. A ready-to-drink product adds water, heat and pH, and the powder's stability becomes a small term in the product's. Packaging carries the other half of the risk. The default is a foil laminate with a declared moisture barrier and a continuous seal. A fibre drum depends on its liner; once that liner is slit and folded back, board and air are against the powder. Nitrogen flushing and a desiccant can help a large headspace or a humid destination, but they cannot rescue a pack that is opened and resealed all shift. ## Who assigns the shelf life Shelf life belongs in the specification. The number comes from real-time data on the commercial pack; it is valid only for the storage condition printed beside it, and it ends when the pack is opened. A period without a storage condition is only half a promise. For a sealed foil pouch, 18–24 months is the range usually cited; the figure on the specification has to come from the study, not from the range. Two limits belong in the purchase contract: the storage condition, because a drum kept above the stated temperature or humidity is outside the specification whatever the date says, and the re-test period with the retained sample, because those make a complaint checkable. The quality page shows how a lot's paperwork stays tied to its retained sample, and the COA page lists the parameters the stability panel follows. The pack formats used in the study are on MOQ and ordering, and the ranges are on the product page. ### 04 Pea protein isolate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/protein-collagen/pea-protein-isolate/moq/ Reviewed: 2026-11-19 A pea protein order starts as a specification decision and only then becomes a quantity. One kilogram is the smallest pack that arrives with its own lot number and certificate; 25 kg is the fiber drum the production order is built from. Stock material moves in one to seven days once the grade, the pack and the destination are settled. In one lineOne kilogram is a lot-tied trial pack; the 25 kg drum is the production unit, and the order is fixed by the specification before the quantity. ## Why the floor is 1 kg A kilogram is the smallest pack that comes with a lot number and a certificate of its own, and that is why the floor sits there. A trial is only worth running if every gram comes from the same lot, because protein, ash, colour and dispersibility move between lots, and a trial that mixes two lots measures the blend rather than the ingredient. The quantity is also useful. At the 8.0% moisture limit, a kilogram of isolate at 73.6% as-is carries 736 g of protein, or 36 servings at 20 g. That is enough for a bench batch, a repeat after the first result, and a portion held back for a stability pull. A smaller sample would do for one run and leave nothing for a repeat. Production is sized in drums. A 25 kg drum carries 18.4 kg of protein at that same as-is figure; a 300 kg order carries 220.8 kg. When the batch has a fixed protein weight, the powder weight comes from the as-is percentage, not from the 80 in the product name. ## Packs and fills Pack formats · pea protein isolate, 80 mesh | Format | Fill | Where it fits | What to watch | Foil pouch | 1 kg | Bench, pilot, sample | Reseal after each opening; keep the headspace small | Fiber drum with liner | 25 kg | Production | Board is not the barrier; the liner is | Agglomerated or instantized | 1 kg or 25 kg | Wetting and dust drive the choice | Lower density; check the fill weight Six things go on every pack: product name, grade, lot number, net weight, storage condition and the pea allergen statement. The pouch is a resealable laminate. The drum is board around an inner liner, and a liner slit and folded back puts the powder against board and air. The pack is not a logistics afterthought. A pouch opened at the start of a shift and left open behaves nothing like a sealed drum, and the stability position moves with it. Naming the pack in the specification settles a question the buyer would otherwise discover on the line. ## Dispatch window Stock ships in one to seven days, counted from the moment the grade, the specification revision, the pack and the shipping address are agreed, not from the first email. An order that lands before the grade is fixed waits in the inbox, not in the schedule. An order leaves the stock route for one of four reasons: the site does not hold the pack, the agglomerated or instantized grade has to be scheduled, a document set has to be issued, or the standard carrier does not serve the destination. Each adds time, and the quotation should name the one that applies. ## Six lines a quotation has to answer Six answers make a quotation complete; without them it is an indication of interest, not an offer. - The grade and the revision: pea protein isolate, N × 6.25, dry basis, 80 mesh, spray-dried. - How much, in what pack, and whether it is a trial or a production run. - The destination, the Incoterm and the delivery address, since those fix the route and the paperwork. - The documents: COA, specification, SDS, allergen statement, and any non-GMO, halal or kosher certificate. - The label owner and the lot marking required. - The required date, and any restriction on carrier or packaging. The first two are simple. The last four are where a confirmed order becomes a question again. ## What a sample has to carry A sample is paperwork with powder behind it. Draw the powder from the lot named on the order, and send it with that lot's number, COA and pea statement. Powder in an unmarked bag is a demonstration; it cannot back a stability study, a label decision or a complaint. Buy enough for two runs. A hundred grams shows how the powder wets and how earthy it tastes; it will not cover a formulation change, and it leaves nothing for retention. That is the job of the 1 kg pouch. ## Where the supplier's side ends Commercial terms live in the offer and the contract, not on a specification page. The supplier's side is the specification a lot is released against, the pack, the documents and the dispatch window for stock. The buyer's side is the destination, the label, the storage on arrival and the finished product. Three points are worth fixing before the first order: the storage condition and the re-test period, because material kept outside the stated condition is outside the specification; the complaint window and the retained sample, because a claim that cannot be checked cannot be settled; and the definition of the pack, because a specification that names the pouch does not automatically cover a drum. The parameters an order is placed against are on the COA page; the grade and pack it should name are on the grade comparison; the catalogue limits behind both are on the product page. The documents that travel with the drum are on the compliance page, the batch file is on the quality page, and the minimum itself is defined in the MOQ glossary entry. ### 05 Where pea protein isolate is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/protein-collagen/pea-protein-isolate/compliance/ Reviewed: 2026-11-19 In the EU, the US and the UK, pea protein isolate counts as an ordinary food ingredient. It is not a novel food, an additive or a drug, and selling it as an ingredient does not require pre-market approval. The usable-lot question is narrower: the legume allergen position, the protein basis behind the label, and the contaminant results for the product as sold. In one lineNo approval stands behind a pea protein lot; what the file has to document is the legume allergen position, the protein basis and the contaminant results. ## Three questions, three owners Three checks decide the file: whether the material may be sold as a food ingredient where it is going; whether the pack declares the material, the allergen position and the protein basis correctly; and whether the results are inside the contaminant limit for the product as sold at the dose taken. Each check has a different owner: status with the supplier and importer, the label with the recipe, the contaminant limit with the daily dose, and claims with the brand. ## Europe: the EU and the UK Pea protein has been eaten as a food in the EU for years and, as of this review, is not a novel food; a new source or process should still be checked against the current novel food catalogue. Food supplements fall under Directive 2002/46/EC. The label is governed by Regulation (EU) No 1169/2011. As of this review, the Annex II list of 14 allergens includes soybeans and lupin but not peas. A pea-containing product therefore does not have to emphasise pea, though the ingredient list still has to name it. Pea allergy exists and cross-reactivity with other legumes is documented, so the specification should carry a pea statement and the factory a cross-contact record. Contaminant limits sit in Regulation (EU) 2023/915, Annex I. The limit attaches to the supplement as sold, not to the drum, so the raw-material specification must leave space for everything else in the formula. The UK applies retained law. The 14 allergens are still enforced through the Food Information Regulations 2014, and food supplements are covered by the Food Supplements (England) Regulations 2003 and devolved equivalents. Contaminant limits sit in domestic law rather than Regulation (EU) 2023/915, so check the current UK text before release. ## The United States US rules regard pea protein as either a food ingredient or a dietary ingredient, depending on how it is sold. Where it is sold as a supplement, the facility and records fall under 21 CFR 111, and the finished product carries a Supplement Facts panel under 21 CFR 101.36. The basis of sale should be stated by the supplier and kept in the buyer's file. As of this review, FALCPA makes milk, egg, fish, crustacean shellfish, tree nuts, peanuts, wheat and soybeans major allergens; sesame was added by the FASTER Act and has been in force since 1 January 2023. Pea is not on the list. It still has to appear in the ingredient statement, and a product that shares a line with soy or wheat needs a cross-contact control and, where the risk remains, an advisory statement. The FDA does not define “may contain”, so the wording should be justified by the cleaning validation rather than added by habit. The US panel protein figure uses a nitrogen factor; where no specific factor applies, 21 CFR 101.9 uses 6.25, the factor here. A supplier using a different factor would produce a different figure from the same nitrogen result. ## Contaminant limits by market Heavy-metal limits · pea protein isolate used as a supplement, by market | Element | EU | US | UK | Lead | 3.0 mg/kg (as sold) | No federal limit for supplements; state law applies | Retained limit; check the current text | Cadmium | 1.0 mg/kg (as sold) | No federal limit for supplements | Retained limit; check the current text | Mercury | 0.10 mg/kg (as sold) | No federal limit for supplements | Retained limit; check the current text | Arsenic | Not harmonised for supplements | No federal limit for supplements | Retained limit; check the current text The catalogue sets Pb ≤3, Cd ≤1 and Hg ≤0.1 mg/kg, mirroring the EU supplement limits. They are ceilings rather than targets: a lot at the ceiling leaves nothing for the rest of the formula, and a 30 g daily dose argues for a tighter internal limit. Arsenic has no harmonised EU supplement limit, so ≤2 mg/kg is a contractual term. The ICP-MS method note covers the panel and its limits of detection. ## Claim boundaries No disease claim is available for a food or a supplement in these markets, and this site makes none. Protein claims sit in the nutrient-content category and come with conditions. EU rules set the “source of protein” threshold at 12% of energy and “high protein” at 20%, measured on the product as sold. US rules put “good source” at 10–19% of the Daily Value and “high” or “excellent source” at 20% or more, against a 50 g protein Daily Value. “Plant-based” and “vegan” are marketing terms rather than defined food-law categories: a plant-based claim says nothing about the allergen status, and a vegan claim is about ingredients and processing aids, not protein content. “Gluten-free” is a defined claim with a threshold — 20 mg/kg in the EU and the US — and a pea isolate is not automatically gluten-free if it shares a mill with wheat. Reference values behind those percentages are in the NRV glossary entry. Wording about a health effect is a health or medicinal claim and is outside this file. The label can state the protein quantity, source and grade; it cannot state what the protein does in the body. ## What travels with the lot - Lot COA: protein, moisture, ash, fat, pH, mesh and contaminants. - Documents that name the grade, the process and the nitrogen factor, in a specification and a technical data sheet. - Safety data sheet, 16 sections. - Allergen statement: pea, plus any shared legume or cereal line. - A statement of the legal basis for sale in the destination market. - Non-GMO declaration; halal or kosher certificates if the market asks for them. - A gluten-free test result if the label makes that claim. ## The pre-order checklist - Does the ingredient name carry the grade, and does the label protein figure use the as-is value? - Is pea named on every pack, and is the shared-line position documented? - Do the contaminant results sit far enough below the limit at the intended dose? - Is every claim a nutrient content claim, and is the gluten-free or plant-based wording defined? - Is the document pack complete for the destination market? The catalogue limits behind this page are on the product page. The grade choice is set out on the grade comparison, the allergen list is defined in the Annex II glossary entry, and each market summary sits on its own page: EU, US and UK. ### 06 How we prove a pea protein lot is the isolate URL: https://nutrition.rainwoodbio.com/products/protein-collagen/pea-protein-isolate/identity/ Reviewed: 2026-11-19 A lot is pea protein isolate when four measurements agree: the protein figure against its nitrogen factor and dry basis, the amino acid profile behind that protein, the ash and fat that the isolate is allowed to carry, and the physical form of the powder. Each of those can be satisfied by a different powder. Four tests, then, rather than one — because the protein percentage on its own is the weakest evidence in the file. In one lineA pea isolate is proved by four measurements together — protein against its factor, the amino acid profile, the ash and fat floor, and the amorphous powder — because any single one can be satisfied by a different powder. ## Four tests, four questions Layer one is the nitrogen result: Kjeldahl, N × 6.25, dry basis, read against the 80.0% floor. It measures nitrogen, not identity. Amino acids come next. Pea runs high in lysine and arginine and limited in methionine and cysteine, which is the shape of a legume protein rather than a cereal or a dairy one. Add a foreign protein and the pattern moves; add nitrogen that is not protein and it does not move at all. Layer three is what the protein is not: moisture ≤8.0%, ash ≤5.0%, fat ≤2.0%. Ash and fat are the two that separate an isolate from a concentrate and from a blend; moisture is the simplest check in the set. Layer four is the powder itself: an amorphous spray-dried solid at 80 mesh, with a pH in the stated window and a defined dispersion behaviour, rather than a blend, a crystallised lot or a different process. ## The factor, and the ratios that follow At 6.25, nitrogen is taken as 16% of protein; an 80.0% figure therefore sits on about 12.8% nitrogen. Two ratios do most of the work. The first is protein to ash: at 80.0% protein and 5.0% ash the ratio is 16:1, while a concentrate at 55% protein and 6% ash sits near 9:1. An 80% protein figure beside a concentrate-level ash result points to a blend, or to nitrogen that is not all protein. Protein to fat is the second ratio: at 80.0% protein and 2.0% fat the floor is 40:1. A fat figure three times the ceiling is not the isolate this specification describes, whatever the certificate says at the top. The amino acid sum gives a third check. Acid hydrolysis loses part of the tryptophan and cysteine, so the sum expressed as protein usually lands a little under the Kjeldahl figure. A gap of two or three points is normal analytical loss; five or more suggests some of the nitrogen is not protein nitrogen. As an illustration, 1% melamine in the powder would read as about 4.2 points of protein under 6.25, 1% urea as about 2.9, and 1% glycine as about 1.2. None of those shows up as protein in the amino acid profile, and every one of them lifts the headline figure. ## What XRD and FTIR can settle A spray-dried isolate is amorphous, so its X-ray diffraction pattern should be a broad halo with no sharp reflections, which is itself evidence of the drying route. A sharp reflection points to a crystalline phase — pea starch from a concentrate or flour, a crystalline sugar or sugar alcohol used as a carrier, a crystalline amino acid such as glycine or leucine, or an inorganic salt. It is also the fastest check for a drum that has crystallised in storage. FTIR adds the functional-group view: the amide I band near 1650 cm⁻¹ and amide II near 1545 cm⁻¹ belong to the protein backbone, while the carbohydrate region shows starch or sugar. Against a reference spectrum of the same grade, FTIR confirms the material class quickly; it does not quantify protein. Each method note — XRD, FTIR — sets out what the technique can and cannot settle. ## Where substitution shows up Adulteration routes · what changes and which test catches it | Route | What it changes | Test that catches it | Concentrate blended in | Fibre and starch up, protein down, colour deeper | Protein, carbohydrate by difference, XRD for starch | Other protein added | Amino acid pattern shifts, foreign DNA present | Amino acid profile, PCR or ELISA | Starch or maltodextrin | Carbohydrate up, protein down, crystalline starch on XRD | Carbohydrate, XRD, iodine | Non-protein nitrogen | Kjeldahl up, amino acid sum unchanged | Amino acid profile, LC-MS/MS | Amino acid spike | Profile abnormal, crystalline phase possible | Amino acid profile, XRD | Excess water | Moisture above limit, caking | Moisture, water activity The first three routes are commercial substitutions: a lower grade sold as a higher one, or a blend that meets the protein figure while missing the ash and fat ceilings. Non-protein nitrogen is the safety-critical route, and it is why a protein figure without an amino acid profile is an incomplete identity file. ## What the specification has to fix - The grade, the process and the physical form: pea protein isolate, alkaline extraction and isoelectric precipitation, spray-dried, 80 mesh. - Protein, with the factor and basis stated: ≥80.0% by Kjeldahl on a dry basis, N × 6.25. - Moisture, ash and fat, each as a limit with its method. - An amino acid profile, reported in g per 100 g of protein rather than as one figure. - A non-protein nitrogen screen, melamine by LC-MS/MS where the risk exists, run at release rather than once a year. - The allergen statement: pea, and any shared legume or cereal line. A specification that stops at protein, moisture and ash describes a white powder, not a pea isolate. These lines and their methods are laid out on the COA page. ## Five questions to ask - What nitrogen factor and basis are on the certificate, and can the nitrogen result be shown alongside the protein figure? - Can you supply the lot's amino acid profile, and does its sum match the Kjeldahl result? - What ash and fat limits apply to the grade you are quoting, and are they run on every lot or only written into the specification? - Which method was used to screen for melamine or another non-protein nitrogen, if any? - Does the retained sample carry the same lot number as the drum? Every one of these is a fair question; a supplier who cannot answer them is showing a powder, not documenting it. How far isolate and concentrate can sit apart is on the grade comparison, and the catalogue limits a specification starts from are on the product page. ### 02.1 Pea vs soy protein isolate: protein, allergens and the label URL: https://nutrition.rainwoodbio.com/products/protein-collagen/pea-protein-isolate/grades/pea-vs-soy/ Reviewed: 2026-11-19 Pea and soy protein isolate are both legume proteins separated to a high-protein powder, and they are not interchangeable. Soy carries about ten points more protein on a dry basis and is a regulated major allergen in the EU, the US and the UK; pea is not on those lists. Those two differences set the dose, the label and the document pack before flavour or supply are discussed. In one linePea and soy isolate differ first in protein density and in allergen status, and only then in the flavour and the label wording that follow from them. ## Protein density and the rest of the powder Soy isolate is specified at ≥90.0% protein on a dry basis, pea at ≥80.0%, both by Kjeldahl with N × 6.25. At their moisture limits the as-is figures are 83.7% for soy and 73.6% for pea. To deliver 20 g, soy needs 23.9 g of powder and pea 27.2 g — 3.3 g more per serving. The difference is small in a 30 g stick and larger in a bar where every gram of powder has to be carried by the matrix. Pea and soy protein isolate · catalogue limits side by side | Point | Pea protein isolate | Soy protein isolate | Protein, dry basis | ≥80.0% (N × 6.25) | ≥90.0% (N × 6.25) | Protein, as-is at the moisture limit | 73.6% at 8.0% | 83.7% at 7.0% | Powder for 20 g protein | 27.2 g | 23.9 g | Moisture | ≤8.0% | ≤7.0% | Ash | ≤5.0% | ≤5.0% | Fat | ≤2.0% | ≤1.0% | Major allergen | No; pea is a legume but not on the lists | Yes; soy is on all three lists | Isoflavones | Not a specification line | Present; a line where the customer asks The rest of the proximate profile runs the same way. Both are capped at 5.0% ash. Soy is capped at 1.0% fat and pea at 2.0%. Soy isolate carries isoflavones, which belong in the specification if the label or the customer asks about them; pea isolate does not carry them at a level that needs a line. Both are 80 mesh powders and both disperse to an opaque suspension, so the physical difference is smaller than the compositional one. ## The allergen difference Soy is one of the 14 allergens in the EU's Regulation (EU) No 1169/2011 Annex II, one of the major food allergens under the US FALCPA, and one of the 14 enforced by the UK's Food Information Regulations 2014. A product that contains soy protein isolate must emphasise soy in the ingredient list and, in the US, carry a “Contains: soy” statement or a parenthetical. Pea is not on any of those lists. It is still a legume, and legume allergy is real: a pea-sensitive consumer can react to pea protein, and cross-reactivity with other legumes such as peanut and lupin has been reported. The absence of a mandatory declaration is not a statement that the material cannot provoke a reaction. It means the label does not have to highlight pea, while the specification should still name it and the factory should still control cross-contact with the legumes and cereals it also runs. For a product sold as soy-free, the control is the shared line, not the ingredient name. A pea isolate packed on a line that also handles soy needs a cleaning validation and, where the risk remains, an advisory statement. The Annex II glossary entry lists the 14 allergens, and the compliance page covers the declaration. ## In the glass and on the line Both isolates are spray-dried powders that disperse in water to an opaque, slightly gritty suspension; neither makes a clear drink. Soy isolate is usually the more neutral of the two in taste, with a beany note that most flavours mask; pea isolate carries a greener, earthier note that is harder to hide in a plain shake and easier in a bar or a cocoa system. That is a formulation observation, not a grade ranking. Heat and pH behave similarly. Both proteins are least soluble near pH 4.5–5.0, both can thicken or gel when a concentrated solution is heated, and both need a heat process designed around the protein. Soy isolate brings isoflavones and a different amino acid balance; pea isolate brings more lysine and less methionine per 100 g of protein. Those are specification facts for a nutrition panel, not claims about what the protein does. ## How the label names them In the EU the ingredient list names the isolate and emphasises the soy: “soy protein isolate”, with “soy” in bold or capitals. Pea appears as “pea protein isolate” with no emphasis. In the US the ingredient statement names the material and the FALCPA declaration follows for soy; pea needs no “Contains” line. The protein figure on the panel is as-is. A product that declares 20 g of protein from 27.2 g of pea isolate is consistent; one that declares 20 g from 23.9 g of soy isolate is consistent; one that uses the dry-basis figure for either is not. The product name should match the ingredient list: a “pea protein” product made with concentrate is a different label from one made with isolate. ## What changes with the source Both are ordinary food ingredients in the three markets and neither needs pre-market approval. Food supplements fall under Directive 2002/46/EC in the EU, the Food Supplements (England) Regulations 2003 and the devolved equivalents in the UK, and the DSHEA framework with 21 CFR 111 in the US. The contaminant limits apply to the finished product as sold, and they do not change with the protein source. Protein claims do not change either: the EU thresholds are 12% and 20% of energy, the US thresholds 10–19% and at least 20% of the Daily Value. What changes is the allergen file and the specification line for isoflavones. A soy-containing supplement needs the soy declaration on every pack; a pea-containing one needs the pea statement and the cross-contact record. Neither source carries a disease claim, and neither is a medicine. ## Which source fits Choose soy isolate when the formula needs the highest protein per gram, when a neutral flavour matters more than the allergen status, when the label can carry the soy declaration, and when the supply base for soy isolate fits the market. Choose pea isolate when the product must avoid the soy allergen declaration, when 27 g of powder per 20 g of protein fits the serving, when the earthy note suits the matrix, or when the customer's specification names pea. Neither choice is a statement about health. It is a statement about protein density, allergen labelling, flavour and supply, and it belongs in the specification as a source, a grade and a protein basis. The pea product page and the soy product page carry the catalogue limits; the pea grade comparison covers isolate against concentrate, and the pea compliance page covers the declaration. ### 01 What the COA for soy protein isolate actually contains URL: https://nutrition.rainwoodbio.com/products/protein-collagen/soy-protein-isolate/coa/ Reviewed: 2026-11-19 Soy protein isolate is traded on a 90% protein figure, yet that number is an arithmetic result, not a direct measurement. A certificate that omits the nitrogen factor and the moisture basis has left the reader unable to reconstruct it. The rest of the sheet matters too: moisture, ash, fat, the fiber and carbohydrate left over, the mesh, the contaminants and the microbiology. The catalogue states what the material must meet; the lot certificate records what a specific batch did. In one lineA soy isolate certificate is complete only when the 90% protein figure arrives with its N × 6.25 factor, its dry basis and the ash, fat and moisture that account for the rest of the powder. ## The parameter list CAS 9010-10-0 identifies the soy protein material; it does not point to a discrete compound with one molecular formula. A useful certificate therefore describes the powder through several measurements at once: the protein that the nitrogen calculates to, the water, ash and fat beside it, the flow and dispersion behaviour, and the contaminants and organisms that must be absent. The first table gives the catalogue limits for the 80 mesh grade. These are the levels agreed in the specification and repeated for each lot. COA parameter list · soy protein isolate, 80 mesh | Parameter | Method | Release limit | Appearance | Visual | Off-white to light cream powder | Protein (dry basis) | Kjeldahl, N × 6.25 | ≥90.0% | Moisture | Loss on drying | ≤7.0% | Ash | Gravimetric, furnace | ≤5.0% | Fat | Solvent extraction | ≤1.0% | pH (5% suspension) | Potentiometry | 6.5–7.5 | Particle size | Sieve analysis | ≥95% through 80 mesh Contaminants and microbiology · soy protein isolate | Parameter | Method | Release limit | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and enrichment | APC ≤10,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent The grade belongs in the product name on the certificate. “Soy protein” without “isolate” covers a family with different limits, and a buyer comparing two sheets needs to know which member of the family each one describes. The isolate-versus-concentrate distinction is set out on the grade comparison page. ## Kjeldahl, the factor and the dry basis The Kjeldahl method reports nitrogen; the protein figure is a conversion from it. For soy protein the Codex factor is 6.25, so 90.0% protein corresponds to about 14.4% nitrogen on the same dry basis. Some older certificate templates still use the Jones factor of 5.71, and the same nitrogen result would then read about 82.2%. Without the factor on the page, two protein figures are not comparable. The basis is the other half of the calculation. The catalogue figure is dry basis. At the 7.0% moisture ceiling, 90.0% dry basis is 83.7% as-is, which is the figure a serving calculation needs. The Codex standard for soy protein products also works on a dry basis and excludes added vitamins, minerals, amino acids and food additives. A powder that reaches 90% by adding amino acids is not the same material as one that reaches it with soy protein alone, even when both sheets print 90%. The percentage is only portable when the factor and the basis travel with it. Copying the percentage alone into a purchase order leaves the arithmetic unresolved. The loss on drying entry explains why the moisture figure moves the as-is number. ## Catalogue range, release limit and lot result The release limit is the boundary the lot must clear. The lot result is the figure the bench obtained for that batch. A useful sheet shows both, with the method beside each line, because the phrase “conforms to specification” is a conclusion rather than a measurement. Two lots can pass the same ≥90.0% line at different distances above it, and the gap matters when a serving is built on the as-is figure. The non-protein fraction is not one substance. On a dry basis, 90.0% protein with 5.0% ash and 1.0% fat leaves about 4% for fiber and carbohydrate. If the ash and fat are reported as-is, the arithmetic at 7.0% moisture runs 83.7% protein plus 7.0% moisture, 5.0% ash and 1.0% fat, leaving about 3.3%. Both views are legitimate, but they cannot be mixed in one sentence; every line has to state its basis. What this page calls a specification is the catalogue level, not a record of any batch. The certificate for the lot that ships is the batch-specific document. We do not publish lot results, lot numbers or customer names. ## Where lots drift The protein and ash figures follow the bean and the separation step. Crop, origin and storage change the protein and mineral load that reaches the plant. Alkaline extraction, isoelectric precipitation and washing decide how much non-protein fraction is removed; neutralisation decides part of the ash; spray drying decides the moisture, the mesh and the colour. Particle size and dispersibility can move while the protein figure stays put. A lot can meet ≥90.0% and still sit at the coarse edge of the 80 mesh cut-off, wet slowly on a filling line and leave lumps in the bag. Colour can drift from off-white towards cream after a hotter drying run, and a beany or cereal note can strengthen with moisture uptake. Request the retained sample and the storage record; the protein number alone will show neither. ## When an outside test earns its place An outside test is worth ordering in three situations: a new source, a first shipment into a regulated market, or a label statement that the supplier's certificate does not support. A useful panel is targeted rather than exhaustive: it should close the specific gap the certificate leaves. Nitrogen by Kjeldahl or Dumas, the amino acid profile, crude fiber and ash, the ICP-MS contaminant panel and a soy-specific identity test can all run on the same retained sample. An independent laboratory is also the practical route through a disagreement. Provide the retained sample, the certificate for the lot and the specification both sides agreed on, then ask for the few tests that distinguish the competing explanations instead of repeating the full panel. The quality page explains how the lot file and its retained sample are stored. ## The lines that separate two offers - The protein value, its conversion factor, its basis and the underlying nitrogen result. - The ash, fat and moisture limits, each with its basis. - The fiber and carbohydrate fraction, especially for an isolate. - The mesh and bulk density, with the test method. - The soy allergen statement and the cross-contact controls. - The contaminant and microbiological panel, plus the identity evidence. If two offers match on 90% protein but diverge on the other lines, they describe different materials. Behind the paper sits the record: the plant, the soybean source, the extraction and drying conditions, and the retained sample. The paperwork can be accurate and still belong to another container, so the lot code should match on the certificate, the pack and the retained sample. For the ranges themselves, see the soy protein isolate product page. The grade choice is set out in the grade comparison, the identity tests in the identity page, and the certificate definition in the COA glossary entry. ### 02 Soy isolate or concentrate: choosing a soy protein grade URL: https://nutrition.rainwoodbio.com/products/protein-collagen/soy-protein-isolate/grades/ Reviewed: 2026-11-19 Soy protein is sold as flour, concentrate and isolate, and the three are different label ingredients with different protein densities and different amounts of fiber, ash and fat. For a powder, a stick pack or a bar, the practical choice is usually isolate against concentrate: the isolate gives more protein per gram of powder, the concentrate keeps the fiber and the minerals. The protein number on the front of the bag is the start of the comparison, not the end of it. In one lineThe grade is the protein density and the fiber and ash that come with it, not the number on the front of the bag. ## Why the family has several members The Codex standard for soy protein products defines the family by protein content on a dry basis, calculated with N × 6.25: soy protein flour at 50% or more and below 65%, soy protein concentrate at 65% or more and below 90%, and soy protein isolate at 90% or more. The definition excludes added vitamins, minerals, amino acids and food additives, so the percentage has to come from the soy protein itself. The processes behind the grades are different, not just the numbers. A concentrate is made by washing soluble sugars out of defatted soy flour with alcohol or an acid solution, which leaves much of the fiber and the minerals in the powder. An isolate is made by dissolving the protein at alkaline pH, precipitating it near its isoelectric point around pH 4.5, washing the curd, neutralising it and spray drying. The isolate process removes more of the fiber and the soluble ash, and that is where the protein density comes from. CAS 9010-10-0 identifies the soy protein material, not the grade. Two certificates can carry the same CAS and describe a concentrate and an isolate. ## The family at a glance Soy protein grades · protein, fiber and the label name | Grade | Protein, dry basis | Fiber | Ash and fat | Usual fit | Label name | Soy protein flour | 50% to below 65% | Retained | Higher than the isolate | Bakery, cereal, blends | Soy flour or soy protein flour | Soy protein concentrate | 65% to below 90% | Retained | Higher than the isolate | Bars, textured products, blends | Soy protein concentrate | Soy protein isolate | ≥90.0% | Removed by the process | Ash ≤5.0%, fat ≤1.0% | Sports powders, sticks, bars | Soy protein isolate | Agglomerated or instantized isolate | Same as the isolate | Same as the isolate | Same as the isolate | Sachets, spoonable powders | Soy protein isolate, with the form named The table maps the family; it is not a recommendation. The isolate row is the catalogue specification on this site; the concentrate band comes from the Codex definition. Every row is its own specification, and each certificate must identify which row it covers. ## What changes in the powder The isolate is a spray-dried powder specified at 80 mesh, with agglomerated and instantized forms available on request. Mesh, bulk density, dust and wetting rate change with the form, and they change how the powder behaves on a filling line. A finer powder disperses quickly but makes more dust; an agglomerated powder wets without lumps but fills a scoop differently. The isolate dispersion is opaque and does not form a clear solution. That is a property of soy protein at the concentrations used in a drink, not a defect in the mesh. A formulator who needs a clear beverage has to change the protein or the format, not ask for a finer sieve cut. The concentrate behaves differently again: it carries fiber and can be granular or textured, which is useful in a bar or a textured product and awkward in a fine powder blend. Colour and odour move with the process. Both grades are off-white to cream, and both can carry a beany or cereal note that strengthens with moisture and heat. The isolate is not automatically the more neutral of the two; the drying step and the storage history decide that. ## What changes at the target dose The dose calculation runs on the as-is protein content, not on the dry-basis figure. At the 7.0% moisture limit, 90.0% dry basis is 83.7% as-is, so 20 g of protein needs 23.9 g of isolate. A concentrate at 65.0% protein and the same 7.0% moisture is 60.5% as-is, so the same 20 g needs 33.1 g. The 9.2 g difference is powder the rest of the formula has to carry, and it arrives with fiber, ash and carbohydrate. Powder needed for a protein target · isolate 90.0% and concentrate 65.0%, both at 7.0% moisture | Protein target | Soy isolate | Soy concentrate | Extra powder | 20 g | 23.9 g | 33.1 g | 9.2 g | 30 g | 35.8 g | 49.6 g | 13.8 g The concentrate band runs up to just below 90%, so the real figure depends on the lot. At 70.0% protein and 7.0% moisture the 20 g figure is 30.7 g, not 33.1 g. The calculation has to be run on the actual certificate, not on the lowest number in the band. The same arithmetic applies to a scoop. A 25 g scoop of isolate at 83.7% as-is delivers 20.9 g of protein; the same scoop of a 60.5% concentrate delivers 15.1 g. Rounding the powder weight rather than the protein puts the wrong figure on the panel. ## What the specification should say - The grade and the process: soy protein isolate, spray-dried, 80 mesh; name agglomeration or instantizing if the line needs it. - Protein at ≥90.0% dry basis, measured by Kjeldahl with the N × 6.25 factor, excluding added amino acids, vitamins and minerals. - Moisture ≤7.0%, ash ≤5.0%, fat ≤1.0% and pH 6.5–7.5, each with its method and basis. - Particle size ≥95% through 80 mesh, with the test method stated. - The soy allergen statement and the cross-contact controls. - No other protein or nitrogen source added; non-GMO or identity-preserved status where the label relies on it. A specification that says only “soy protein” leaves the supplier free to interpret the grade. The name on the specification, the name on the certificate and the name in the ingredient list have to be the same name. ## When the other grade misfits The isolate is the wrong choice when the formula benefits from the fiber and the texture the concentrate brings, when the serving can carry the extra powder, or when the bar matrix needs the water-binding that comes with the non-protein fraction. The concentrate is the wrong choice when the serving cannot carry the extra powder, when the carbohydrate and fiber line has a hard ceiling, or when the label is built around a higher protein density. The protein number alone does not decide it. The decision comes from the dose, the matrix, the label and the certificate. The arithmetic behind the two grades is set out on soy isolate versus concentrate; the tests behind the numbers are on the COA page; the catalogue limits are on the soy protein isolate product page; and the label rules are on the compliance page. ### 03 Soy protein isolate is stable dry; moisture and heat decide the rest URL: https://nutrition.rainwoodbio.com/products/protein-collagen/soy-protein-isolate/stability/ Reviewed: 2026-11-19 A sealed pack of soy protein isolate will hold its protein figure for the length of its shelf life. The changes that matter happen elsewhere: water enters the powder, heat and pH act on the dispersion, and reducing sugars in the formula brown the protein. The pack and the storage condition are therefore the real shelf-life variables; the certificate only records the condition at release. In one lineDry soy isolate does not lose protein in storage; moisture, heat and the reducing sugars in the matrix decide what changes. ## The dry powder Protein powders attract water, and soy isolate is no exception. Water first collects on the particle surface, where it softens the outer layer and lets neighbouring particles stick; later it raises the water activity inside the pack and gives colour and flavour reactions enough mobility to proceed. A container left open in a damp room can form hard lumps within days, while the protein and ash results on a retest may barely move. The certificate's ≤7.0% moisture is a release figure. It says nothing about the powder after a season in a warehouse. For shelf-life work, the useful measurement is water activity inside the pack over time, and that is governed by the pack barrier and the humidity of the store. Loss of dispersibility usually appears before any chemical change. Powder that has taken up water floats on the surface of a drink, forms lumps and leaves a gritty layer at the bottom of the shaker. A small dispersion test on the retained sample catches it sooner than a protein assay. ## In solution Mixed with water, the isolate gives an opaque dispersion; a clear solution is not what this material does. The opacity is normal, not a sign of damage. Over time the dispersion can darken, develop a stronger beany or cooked note, and thicken as the protein associates. Heat is the strongest accelerator. The isolate has already been through alkaline extraction and spray drying, so its protein is denatured and functional before it reaches the formula. Heating the matrix acts on that functional state, raising viscosity or forming a gel; a pasteurised or hot-filled drink can change more in one pass than in months at room temperature. pH is the other control. Solubility is lowest around the isoelectric point near pH 4.5, so a neutral shake holds the dispersion while a low-pH drink close to that point may sediment. The catalogue pH of 6.5–7.5 is measured on a 5% powder suspension and should not be read as the pH of the finished drink. Microbial stability in a reconstituted drink is a separate design problem. The powder's APC ≤10,000 cfu/g and absent E. coli and Salmonella describe the dry material, not a water-based product that needs its own preservation, heat process or water-activity control. ## What actually moves the result Four variables govern the rate of change: water activity at packing, the pack's moisture and oxygen barrier, storage temperature, and the reducing sugars present in the formula. Colour responds most to temperature, caking and the beany note respond most to moisture, and browning follows the reducing sugars. Browning here is a Maillard reaction between lysine on the protein and a reducing sugar. Soy protein supplies the lysine; glucose syrup in a bar or fruit powder in a drink supplies the sugar. The reaction accelerates with water activity and heat, and it consumes available lysine while it darkens the product. The fat limit of ≤1.0% keeps rancidity low without eliminating it; a small residue of lipid can oxidise and add an off-note. Trace metals also matter, because iron or copper can catalyse colour formation in a moist powder. That is why the ash and heavy-metal limits belong next to the moisture limit. ## The test protocol Stability protocol · what each condition answers | Condition | Duration | What it tests | 25 °C / 60% RH | Long-term | Shelf life at the stated storage condition | 30 °C / 65% RH | Intermediate | Behaviour in a warm, humid market | 40 °C / 75% RH | Accelerated | Moisture uptake, caking, colour, odour | Open-pack humidity challenge | Short term | In-use behaviour after the pack is opened | Matrix trial at target pH and heat process | Product shelf life | Sediment, viscosity, colour and aroma in the finished product Test the powder in the pack it will actually ship in, not in a jar from the lab. Pull samples at the beginning, middle and end, and check moisture, water activity, appearance, odour and dispersibility at each point. Protein and ash at the two ends serve as an identity check, not as the main pass/fail criterion. ## Formulation and packaging The 1 kg pouch and the 25 kg drum behave differently once opened, so neither can stand in for the other in a stability study. The pouch serves bench and pilot work; its barrier is good, but the headspace is large relative to the contents, so air exchanges quickly after opening. The drum relies on its inner liner for moisture protection. Once that liner has been cut and folded back, the drum is an open pack regardless of the lid. In a finished blend, the isolate is often the most hygroscopic ingredient. A foil stick pack protects it well; a screw-cap jar of clear plastic does not, particularly in a humid room. A bar is a different case: the bar's water activity and humectants matter more than the powder's release moisture. Acidic drinks add another variable. pH, buffer and heat process are formulation choices, not specification choices; a protein that sediments near pH 4.5 may be held in suspension by a different pH, a stabiliser or homogenisation. ## How shelf life is assigned Assign shelf life from stability data for the actual pack and market; there is no ingredient-wide default. The label figure should be the last point at which moisture, appearance, odour and dispersibility still pass with a margin. If the data end sooner, the shelf life ends sooner. Write the storage condition into the specification alongside the shelf life: a cool, dry place away from strong smells, with the liner closed after use. Soy protein absorbs aromas, so a drum stored beside a flavour concentrate can pick up the note. That is a storage failure rather than a production one. How the lot file and its retained sample are kept is explained on the quality page. The parameters followed over time are listed on the COA page; the pack and grade choice for a given matrix is on the grade comparison; the full range is on the soy protein isolate page. ### 04 Soy protein isolate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/protein-collagen/soy-protein-isolate/moq/ Reviewed: 2026-11-19 Soy protein isolate can be bought in a 1 kg pouch for trial work, while a 25 kg fiber drum is the unit a production order is built around. Stock in the standard pack ships in 1–7 days once the order, specification and shipping details are confirmed. Agglomerated or instantized material and non-standard packs are made to order. What makes a quotation usable is not the minimum but the grade, the paperwork and the destination. In one lineOne pouch is a trial; one drum is a production run. The quotation is built from the grade, the documents and the destination, not from the pack size. ## Why the trial pack is 1 kg One kilogram is enough for a real bench trial because it comes from a single lot. A trial usually needs three things: powder at the intended dose, a second run to confirm the first, and a retained portion for stability or comparison. Material from one lot keeps those three consistent; a second lot would shift the ash, mesh and flavour between runs. At 20 g of protein a day for 30 days, the protein requirement is 600 g. A 90.0% dry-basis isolate at 7.0% moisture is 83.7% as-is, so the powder need is about 717 g. That leaves roughly 280 g from a 1 kg pouch for a bench repeat or a retained sample. A 30 g daily target needs about 1.08 kg for the month, so the trial starts with two pouches. One kilogram is a trial size, not a commitment to a drum. A pilot that needs 3 kg can take three pouches. A production plan that needs 300 kg should be built around drums, pallets and the lead time together. ## Packaging Pack formats · soy protein isolate | Pack | Net content | Use | Watch | Foil pouch | 1 kg | Bench and pilot trials, samples | Reseal after opening; high headspace | Fiber drum with liner | 25 kg | Production | Liner is the moisture barrier | Agglomerated or instantized isolate | 1 kg pouch or 25 kg drum | Formats that need faster wetting | Made to order; confirm the mesh and bulk density A foil laminate with a resealable closure makes the pouch, and the moisture barrier is built into that laminate. The drum is fiberboard, protected by an inner liner; if the liner has been slit and rolled back, the powder is exposed no matter how firmly the lid sits. Both formats carry the grade, lot code, net weight, storage instruction and soy allergen statement. Pack choice is part of the stability case, not an afterthought. A 5 kg bag kept in a humid room is a different proposition from a sealed 1 kg pouch, so any non-standard size should be named in the specification. ## Lead time The 1–7 day lead time covers stock in the standard pack. The clock starts when the order, the agreed specification and the shipping details are all in place, not when the first message arrives. A purchase order sent before the specification is signed does not start it. Made-to-order cases take longer: agglomeration or instantizing, a different pack, a document the site does not routinely issue, or a destination outside the standard route. The quotation should say which case applies instead of leaving the buyer to assume the product-page lead time. ## What a quotation needs - Grade and specification revision: soy protein isolate, 80 mesh, with agglomeration or instantizing if needed. - Protein basis: at least 90.0% on a dry basis, Kjeldahl method, N × 6.25 factor. - Quantity, pack and whether this is a trial or a production release. - Destination, Incoterm and delivery address, which determine route and paperwork. - Documents: COA, specification, SDS, soy allergen statement, and any non-GMO or identity-preserved statement the label needs. - Required date, plus any carrier or packaging restriction. A reply that covers only the first three is an opening, not an offer. Most delays between quotation and shipment come from items four to six. ## Samples Ask for material from the lot that will be supplied, with the lot code, the matching COA and the soy allergen statement. A sample without a lot code is a demonstration, not trial stock; it cannot be used for stability work or for a label decision. Order enough to repeat the trial. A 100 g sachet may show how the powder disperses, but it will not cover a second run plus a retained portion. That is why the 1 kg pouch is the trial format. ## Where the terms end Terms of trade are negotiated in the quotation and the contract; a product page is not the place for them. The supplier controls the release specification, the pack, the document set and the lead time for stock. The buyer owns the destination choice, the label, the post-arrival storage and the use in the finished product. Two conditions should be agreed before the first order. One is the storage requirement and the re-test date: material kept outside the stated condition no longer sits inside the specification. The other is how long a complaint may be raised and what retained sample is available: without a sample, a complaint cannot be investigated. The quality page explains both. What the order is measured against is on the COA page; the pack and grade to name are on the grade comparison; the documents that travel with the drum are on the compliance page. The minimum is defined in the MOQ glossary entry, and the full range is on the soy protein isolate page. ### 05 Where soy protein isolate is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/protein-collagen/soy-protein-isolate/compliance/ Reviewed: 2026-11-19 Soy protein isolate is sold as an ordinary food ingredient in Europe, the United States and the United Kingdom; it is neither an additive nor a drug. The file has four jobs: prove the grade, declare the soy allergen, match the contaminant limits that attach to the finished product, and keep any claim inside nutrient-content rules. The ingredient itself does not need approval; the documentation around it does. In one lineSoy protein isolate is a food ingredient in all three markets; the soy allergen, the contaminant limits for the product as sold and the label wording are what the file has to prove. ## Four questions the file has to answer The first question is whether the destination market permits the ingredient. The second is whether soy is declared on both the specification and the finished label. The third is whether the contaminant results meet the limit that applies to the finished product. The last question is whether the label wording and any claim fit the market. Different people own each answer: the supplier and importer for status, the recipe and label for the allergen, the food category for contaminants, and the brand for claims. ## European Union Soy protein has been eaten in Europe for decades and, as far as this review can establish, is not a novel food. Before launching a new source, check the current novel food catalogue for that specific material. Regulation (EU) No 1169/2011 governs allergen labelling. Soybeans and their products sit on Annex II; the exemption for fully refined soybean oil and natural mixed tocopherols does not extend to soy protein isolate. The declaration must appear in the ingredient list, be emphasised as the regulation requires, and survive into the finished pack. For a supplement, the general labelling rules sit alongside the supplement rules: nutrition declaration, portion advice and the rest. Protein is declared in grams, and a protein claim is allowed only if the finished product satisfies Regulation (EC) No 1924/2006. As of this review, the thresholds are 12% of energy for “source of protein” and 20% for “high protein”. ## United States Soy protein isolate is used in conventional foods and as a dietary ingredient in supplements. The supplier should put the intended-use basis in writing, and that statement belongs in the buyer's file. FALCPA lists soy as a major food allergen. The label must declare it, either as “soy protein isolate (soy)” in the ingredient list or in a “Contains: soy” statement. The isolate is not a low-allergen version of soy; the protein remains soy protein. The Nutrition Facts or Supplement Facts panel gives protein in grams and, where a protein claim is made, as a percentage of the Daily Value. 21 CFR 101.54 sets “good source” at 10–19% of the Daily Value; “high” needs 20% or more, calculated on the food as sold. California Proposition 65 can also apply, and its thresholds are dose-based, so destination and daily intake have to be assessed together. ## United Kingdom The UK works from retained food law. The 14 allergens, soy included, remain the declaration reference under the Food Information Regulations 2014 and their devolved equivalents, and prepacked food for direct sale must carry allergen information on the label. Check the current UK contaminant and nutrition texts before releasing a lot. As in the EU, soy must appear in the ingredient list and in any emphasis the label uses. The UK importer should establish which documents the destination authority expects for this product category, because retained law can drift from the EU text. ## The contaminant table Contaminant limits · soy protein isolate sold as a food supplement, by market | Element | EU | US | UK | Lead | 3.0 mg/kg | No federal limit specific to this ingredient; state rules apply | Check the current UK limit | Cadmium | 1.0 mg/kg | No federal limit specific to this ingredient | Check the current UK limit | Mercury | 0.10 mg/kg | No federal limit specific to this ingredient | Check the current UK limit | Arsenic | Not harmonised; member state rules may apply | No federal limit specific to this ingredient | Check the current UK limit Regulation (EU) 2023/915 supplies the EU figures, and they apply to the supplement as sold. An isolate sold as an ingredient is judged against the limit set for the food category it will enter. Lead, cadmium and mercury in the catalogue match those supplement limits; the ≤2 mg/kg arsenic limit is a buyer requirement, not an EU harmonised figure. ## Claims No disease-related claim is allowed for a food or supplement anywhere in these markets. Protein claims follow separate rules, and the test applies to the food as sold rather than the powder in the drum. The EU thresholds are 12% of energy for “source of protein” and 20% for “high protein”; the US uses 10–19% of the Daily Value for “good source” and 20% or more for “high”. Twenty grams of protein in a 200 kcal drink clears the “high protein” threshold; the same twenty grams in a 500 kcal drink does not. The grade does not change that. This site makes no health claim; the pack wording is the brand's responsibility in its market. ## Papers that ship with the lot - Batch COA with protein, moisture, ash, fat, pH, mesh, heavy metals and microbiology. - Specification and technical data sheet naming soy protein isolate, the protein factor and the dry basis. - Safety data sheet in the 16-section format. - Soy allergen statement and the cross-contact controls behind it. - Contaminant and microbiological results for the lot. - Non-GMO or identity-preserved statement where the label relies on it. - US intended-use statement for the dietary-ingredient route, where applicable. ## What to check before the first order - Do the specification, certificate and label all name soy protein isolate? - Does the allergen statement cover soy and every carrier in the pack? - Do the contaminant results meet the destination limit for the finished product, including any state rule? - Does the finished product meet the protein claim conditions on the food as sold? - Does the lot code match across the certificate, the container and the retained sample? The specification behind this page is on the product page. The grade and label question is covered by the grade comparison; identity evidence by the identity page; market summaries by the EU, US and UK regulatory pages; and file assembly by the quality page. ### 06 How we prove a soy protein lot is the isolate URL: https://nutrition.rainwoodbio.com/products/protein-collagen/soy-protein-isolate/identity/ Reviewed: 2026-11-19 Four independent measurements have to line up before a powder can be called soy protein isolate: the protein result and the arithmetic behind it, the non-protein fraction, the amino acid pattern, and a test that specifically detects soy. Each one can be satisfied by a different material, which is why the file needs all four. In one lineSoy isolate identity is a set, not a number: the protein figure, the ash–fat–fiber profile, the amino acid pattern and a soy-specific test have to agree. ## The four checks that build identity Start with the protein result. Kjeldahl gives nitrogen; the N × 6.25 factor turns it into protein; the dry basis removes the effect of moisture. The 90.0% floor is a statement about protein, not about soy, so this layer answers only the first question. Next comes everything that is not protein. Moisture at ≤7.0%, ash at ≤5.0% and fat at ≤1.0% are the limits that place the powder in the isolate band, and fiber plus carbohydrate by difference completes the mass balance. A concentrate carries more fiber and more ash because the process stops before those fractions are washed out. The amino acid pattern is the third check. Soy protein is rich in aspartate, glutamate, arginine and lysine and comparatively low in methionine and cysteine. Adding whey, pea or gluten protein shifts that pattern; adding a non-protein nitrogen source leaves it unchanged. The fourth check is a soy-specific method. PCR is used to look for soy DNA in the retained sample, while ELISA detects soy protein and can be applied to the powder or the finished matrix. A positive result establishes that soy material is present; it does not establish the grade. The protein and ash–fiber layers are what place the material in the isolate band. ## Nitrogen, ash and the arithmetic of identity The 6.25 factor rests on the assumption that nitrogen is about 16% of soy protein; a 90.0% result therefore corresponds to roughly 14.4% nitrogen on the same dry basis. At the catalogue ceilings, ash is 5.0% and fat 1.0% against 90.0% protein, so the mineral and lipid load is small by design. A sheet showing 90% protein beside 8% ash and 6% fiber is describing something other than an isolate. A second arithmetic check is the dry-basis mass balance. Protein at 90.0% plus ash at 5.0% plus fat at 1.0% leaves about 4% for fiber and carbohydrate. At 65.0% protein, a concentrate leaves about 35% for the other components, many of them fiber and carbohydrate. This gap separates the two grades more reliably than the protein number by itself. The nitrogen gap is the third check. The amino acid sum, expressed as protein, usually falls a little below the Kjeldahl result because acid hydrolysis loses part of the tryptophan and cysteine. Two or three points of difference can be explained analytically; five or more suggests nitrogen that is not protein nitrogen. The factor can also disguise a genuine lot. A certificate using 5.71 instead of 6.25 will show about 82.2% for a material that is really 90.0%. Nothing is wrong with the powder; the convention is different. Settle the factor before using any protein result as identity evidence. ## Where XRD and FTIR stop Spray-dried soy isolate is amorphous, so an X-ray diffraction scan shows a broad halo rather than sharp peaks. That halo is consistent with a spray-dried protein, though it does not identify soy. Sharp reflections point to a crystalline addition: an amino acid used to lift the nitrogen figure, an inorganic salt, a sugar that has crystallised in storage, or a mineral carrier. FTIR gives a functional-group fingerprint. Absorbance near 1650 cm⁻¹ (amide I) and 1545 cm⁻¹ (amide II) comes from the protein backbone; the carbohydrate region carries fiber and residual sugar signals. FTIR confirms the material class quickly, but it cannot tell soy from whey or pea, and it does not quantify protein. Use it as a screen. What each technique can settle is described in the XRD and FTIR method notes. Neither replaces the nitrogen result, the amino acid profile or the soy-specific test. ## Adulteration routes worth testing for Adulteration routes · what changes and which test catches it | Route | What it changes | Test that catches it | Concentrate sold as isolate | Protein below 90%, fiber and ash up | Protein, ash, crude fiber, amino acid profile | Other protein added | Amino acid pattern moves away from soy | Amino acid profile, PCR or ELISA | Maltodextrin or starch | Protein down, carbohydrate by difference up | Protein, carbohydrate and fiber, iodine test | Non-protein nitrogen | Kjeldahl up, amino acid sum flat | Amino acid profile, melamine by LC-MS/MS | Added amino acids | Protein up, amino acid pattern distorted | Amino acid profile, mass balance | Soy hull or fiber | Fiber up, protein down, ash up | Crude fiber, ash, protein The first route is commercial: a lower grade sold as the higher one. The rest matter for safety and the label, which is why a protein result on its own cannot carry an identity file. ## Specification lines that make identity testable - “Soy protein isolate (Glycine max), spray-dried, 80 mesh; agglomerated or instantized if required.” - “Protein at ≥90.0% dry basis, Kjeldahl with N × 6.25, excluding added amino acids, vitamins and minerals.” - “Moisture ≤7.0%, ash ≤5.0%, fat ≤1.0%, pH 6.5–7.5, each with method and basis.” - “Crude fiber and carbohydrate by difference reported; no other protein or nitrogen source added.” - “Soy allergen statement; non-GMO or identity-preserved status where the label relies on it.” - “PCR or ELISA on request; retained sample traceable to the lot on the drum.” If the specification covers only the protein, moisture and ash lines, it describes a white powder rather than soy protein isolate. ## Five questions that expose the file - Which nitrogen factor and basis are on the certificate, and can you show the nitrogen result itself? - Will you provide a lot-specific amino acid profile, and does its total reconcile with the Kjeldahl result? - What are the ash, fat and crude fiber results, and do they sit in the isolate band? - Has the lot been screened for melamine or another non-protein nitrogen source, and by what method? - Do you have a soy-specific PCR or ELISA result, and does the retained sample carry the same lot code as the drum? These are ordinary questions for a protein supplier. A supplier who cannot answer them is offering a material, not a documented one. The COA page shows how the numbers fit together; the isolate-versus-concentrate page sets out the grade arithmetic; the compliance page covers the allergen and label file; and the product page carries the catalogue limits. ### 02.1 Soy isolate vs concentrate: protein, fiber and the label URL: https://nutrition.rainwoodbio.com/products/protein-collagen/soy-protein-isolate/grades/soy-isolate-vs-concentrate/ Reviewed: 2026-11-19 Soy protein isolate and soy protein concentrate come from the same bean, but they leave the process at different points. The isolate is 90% protein or more on a dry basis and the concentrate is 65% to below 90%; the gap is mostly fiber, ash and carbohydrate. The choice changes the powder weight per serving, the texture and the ingredient name on the label, and it does not change the soy allergen. In one lineIsolate and concentrate are different label ingredients: the isolate concentrates protein and leaves the fiber behind, while the concentrate keeps the fiber, ash and carbohydrate that the isolate washes out. ## The protein figures and the factor behind them The Codex standard for soy protein products sets the bands on a dry basis with N × 6.25: concentrate from 65% up to but not including 90%, isolate at 90% or more. The number is a floor, not a measurement. A lot at the floor and one well above it are both “isolate”, and the certificate has to report the actual result. Moisture lowers both figures: at the 7.0% ceiling, the isolate reads 83.7% as-is and the 65% concentrate reads 60.5%. A serving calculation must use those lower numbers, because the powder on the bench contains water. Using the dry-basis figure on the powder weight overstates the serving by about six points. The factor is the other half of the arithmetic. If a certificate uses the older 5.71 factor instead of 6.25, the same nitrogen reads about eight points lower: a true 90.0% isolate shows about 82.2%. The grade has not changed; the convention has. Name the factor and the basis before comparing the two grades. ## Fiber, ash and the other fraction Isolate and concentrate · what sits beside the protein | Point | Soy isolate | Soy concentrate | Why it matters | Protein, dry basis | ≥90.0% | 65% to below 90% | Powder needed per gram of protein | Fiber | Removed by the process | Retained from the bean | Carbohydrate declaration, texture, water binding | Ash | ≤5.0% (catalogue) | Usually higher; confirm the limit | Mineral load, taste, neutralisation | Fat | ≤1.0% (catalogue) | Usually higher; confirm the limit | Rancidity risk, mouthfeel Take the catalogue ceilings as a mass balance: once protein, ash and fat are counted, the isolate leaves roughly 4% of its dry matter for fiber and carbohydrate. A 65% concentrate leaves about 35% for those other components. In a bar, that difference becomes texture and water binding; in a drink, it becomes extra solids. Alkaline extraction dissolves the protein; isoelectric precipitation separates it from the insoluble fiber; and washing carries the soluble sugars and part of the ash away. The concentrate process stops earlier: it washes out soluble sugars but leaves the fiber in the powder. They produce different ingredients. ## What the difference takes in powder The serving calculation starts from the as-is figure. Twenty grams of protein requires 23.9 g of the isolate at the floor, but 33.1 g of a 65% concentrate. The extra 9.2 g is not protein; it is the fiber, ash and carbohydrate that come with the lower grade. At 30 g of protein, the gap becomes 13.8 g. Powder needed for a protein target · isolate 90.0% and concentrate 65.0%, both at 7.0% moisture | Protein target | Soy isolate | Soy concentrate | Extra powder | 20 g | 23.9 g | 33.1 g | 9.2 g | 30 g | 35.8 g | 49.6 g | 13.8 g Because the Codex band reaches almost to 90%, a high-protein concentrate closes part of the gap. At 70% protein, 20 g of protein takes 30.7 g of powder, not 33.1 g. Run the sum on the certificate for the lot, not on the bottom of the band. A scoop calibrated for the isolate underfills protein with concentrate, and a label that rounds the powder weight misstates the panel. ## What each grade fits For a stick pack or a drink mix, the isolate is usually the easier way to hit a 20 g protein claim without a 30 g powder fill. The isolate disperses to an opaque mixture; it does not form a clear solution, so neither grade is a clear-drink ingredient. Agglomerated or instantized isolate helps if wetting is the problem. For a bar, the concentrate can be an advantage. Its fiber and non-protein fraction bind water and add body, and the bar matrix can absorb the extra powder. The isolate is the better fit when the bar is built around a high protein number per gram or when carbohydrate and fiber have a tight ceiling. For a capsule, the isolate's higher density means fewer capsules per dose. Textured products want the concentrate for structure; fine blends and spoonable powders want the isolate for serving size and mouthfeel. ## Ingredient names and the allergen EU rules require the ingredient list to name the grade and to highlight the soy. A label might read “soy protein isolate (soy)” or “soy protein concentrate (soy)”, with soy emphasised in bold or capitals under Regulation (EU) No 1169/2011. US labelling uses the same grade names in the ingredient statement and a FALCPA declaration, either a parenthetical or a “Contains: soy” line. The UK keeps the same 14-allergen list in its retained law. “Soy protein” alone does not identify the grade. If the product name says isolate, the ingredient statement cannot name a concentrate. Nor is the isolate a hypoallergenic form of soy: the protein remains soy protein and the allergen declaration is unchanged. ## What the grade does not change Both grades have a history of food use in Europe and are ordinary food ingredients in the US and the UK; as of this review, neither needs a novel food approval or a premarket authorisation because of its grade. Contaminant limits follow the finished product rather than the grade label, so a switch from concentrate to isolate leaves the applicable limit where it was. Protein claims are calculated the same way for both. The EU's “source of protein” threshold is 12% of energy and “high protein” is 20% of energy; in the US, a “good source” claim sits at 10–19% of the Daily Value and “high” begins at 20%. Twenty grams of protein clears the EU “high” threshold in a 200 kcal drink but not in a 500 kcal one. The grade that supplied the protein does not alter that arithmetic, create a claim or remove the allergen. ## Which grade fits which brief Choose the isolate when the serving has no room for the extra grams, when protein per gram is the design constraint, when carbohydrate and fiber have a hard ceiling on the panel, or for a capsule or stick pack. Choose the concentrate when the fiber and the texture are part of the product, when the matrix is a bar or a textured application, and when the serving can absorb the extra powder without breaking the label. Neither grade is a quality ranking. They are different ingredients with different protein density, fiber, ash and label names. The wider grade logic is on the grade comparison page; the numbers behind the certificate are on the COA page; the allergen and claims file is on the compliance page; and the catalogue specification is on the soy protein isolate page. ### 01 What the COA for 5-HTP actually contains URL: https://nutrition.rainwoodbio.com/products/specialty/5-htp/coa/ Reviewed: 2026-11-19 This page lists what a 5-HTP certificate is expected to report: appearance, IR and UV identification, HPLC assay on the dried basis, loss on drying, residue on ignition, related substances, metals, microbiology and particle size. Each entry needs a method and a release limit, not only a value. The ranges here are catalog limits; only the batch COA can speak for a specific drum. In one lineThe assay says how much 5-HTP the lot contains; the drying basis, the related-substance profile and the source say what that number means. ## Reading the certificate line by line The identity and purity block carries most of the weight. A 5-HTP figure is meaningful only when the material has been identified, the moisture has been measured and the rest of the chromatogram has been described. Identity, assay and moisture · 5-HTP | Parameter | Method | Release limit | Appearance | Visual | Off-white to pale cream crystalline powder | Identification | IR and UV against reference | Conforms | Assay | HPLC, external standard | 98.0–101.0% on the dried basis | Loss on drying | Gravimetric | ≤0.5% | Residue on ignition | Gravimetric | ≤0.1% Contaminant, microbiological and physical limits | Parameter | Method | Release limit | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh | Related substances | HPLC | Individual and total limits agreed in the specification The related-substance entry deserves its own line. “Complies” is not a result: the buyer needs the individual peaks, their sum, the column and detector, and the quantification limit. Without the individual figures, one large impurity and six small ones look identical. ## What the dried basis changes 5-HTP is released against an assay calculated after the moisture result is removed. Divide the as-is figure by (1 − loss on drying). At the catalog ceiling of 0.5% the correction is only about half a percent, but a certificate that omits the basis cannot be compared with one that states it. An assay above 100% is not a purity above 100%. The number is relative to a reference standard; weighing, standard purity and integration each contribute. A 100.4% result is within normal method behaviour, not evidence of extra material. Read the assay beside the other three lines. Related substances describe the rest of the chromatogram, loss on drying covers water, and residue covers inorganic matter. Together they should close the mass balance; a large unexplained gap is a reason to ask, not to release. ## The limit and the measured result Two different numbers are often printed in one column. The limit is the gate; the result is the measurement. They should be separate, and the method should sit beside them. Copying the range into the result column defeats the purpose of a certificate. Some tests are attributes: identification conforms or does not, and a pathogen is absent or present. Others need an individual and a total. A “not detected” statement is only as useful as the detection limit printed next to it. Release is a judgement made from the figures, not a stamp that replaces them. ## What moves between batches Between extract lots, harvest timing, solvent, purification and drying change colour, moisture and the impurity pattern. Between synthetic lots, the starting material, the chiral step and the recrystallisation solvent move the same lines differently. The assay can remain inside 98.0–101.0% while the rest of the profile shifts, so the certificate is read as a pattern, not a headline. Milling and sieving set the particle-size result, and flow can differ between two lots that both pass 40 mesh. Colour is a useful warning: cream turning tan or pink can signal oxidation or a metal trace even when the assay is on target. Check the batch record before rejecting a lot on appearance. Look at the direction across several lots. One result at the edge is less telling than moisture creeping up or total impurities trending higher. ## When an outside test earns its place Outside testing is worth ordering for a new source, a first import into a regulated market, a source claim that the certificate cannot support, or a contested result. A focused panel is enough: HPLC assay with related substances, IR and UV, optical rotation where chirality matters, ICP-MS for metals and a micro count, all from one sample. Provenance is the limit. A 98% extract and a 98% synthetic lot look the same to the assay; only the manufacturer's declaration and the lot record address the route. A laboratory can confirm what the material is, not where it came from. Keep the chain intact: the sample that is tested should be the sample that was retained, and its lot code should match the certificate and the pack. ## Comparing two suppliers Six lines separate two offers: source and manufacturer; assay with its method and basis; individual and total related substances with the quantification limit; loss on drying; the metal and micro panel; and the pack. An assay match that leaves the other five different is not a match on material. Traceability is the second layer. One lot code should run through certificate, drum and retained sample, and the manufacturer should be named rather than a trading intermediary. A genuine certificate can still describe a different drum from the one that arrives. The catalog range and pack are on the 5-HTP product page. Source selection is covered on the source page, identity testing on the identity page, the release sequence on the quality page, and the HPLC method in the method note. ### 02 Griffonia extract or synthetic 5-HTP: choosing a source URL: https://nutrition.rainwoodbio.com/products/specialty/5-htp/grades/ Reviewed: 2026-11-19 5-HTP reaches the drum by two routes: extraction from the seed of Griffonia simplicifolia or chemical synthesis. Both routes can be sold at 98.0–101.0% on the dried basis, so the assay does not choose between them. The impurity profile, the source documents, the regulatory route and the label do. In one lineThe source decides the impurity profile, the documents and the label; the assay percentage does not. ## Two routes to the same molecule Griffonia simplicifolia is a West African shrub; the seed carries 5-HTP, and an extract is purified and standardised to the 98% range. The extract route carries a plant matrix through part of the process, so the certificate has to describe the extraction solvent, the carrier if one is used, the extract ratio and the pesticide panel alongside the assay. A Griffonia extract that is 98% 5-HTP is still an extract, and the source documents are part of the material. The synthetic route builds the molecule from defined starting materials and purifies the crystal. It has no harvest and no plant matrix, but it has route-specific intermediates, solvents and a stereochemical step. The certificate has to describe those instead. Neither route is automatically cleaner: a well-controlled extract and a well-controlled synthetic lot can both meet the same assay, and a poorly controlled lot on either route can miss the related-substance profile. The two materials share CAS 56-69-9 and C11H12N2O3. The difference is the supply chain and the paperwork, not the molecular formula. ## What changes on the certificate Griffonia extract and synthetic 5-HTP, line by line | Dimension | Griffonia extract | Synthetic | Source record | Plant, seed, harvest and extractor | Starting materials, route and manufacturer | Assay | 98.0–101.0% dried basis | 98.0–101.0% dried basis | Related substances | Plant indoles and purification residues | Route intermediates and stereochemical impurities | Residues | Pesticides, extraction solvent, carrier | Route solvents and reagents | Colour and odour | Can carry a faint plant note | Usually neutral | Regulatory file | Extract-specific source question | Isolated-substance source question | Label name | Griffonia seed extract, standardised | 5-HTP or 5-hydroxytryptophan Read the table as a set of questions, not a ranking. The extract route carries a pesticide and plant-matrix question; the synthetic route carries a solvent and route-intermediate question. Both carry the same metal, micro and drying lines. ## Colour, flow and the 40 mesh line Both routes target an off-white to pale cream crystalline powder at ≥95% through 40 mesh, but the two powders do not behave identically in a hopper. An extract can carry a faint colour or odour that the synthetic crystal does not, and the crystal habit can differ enough to change flow. The catalog sheet does not fix bulk density; if the capsule fill depends on it, ask for the figure on the lot. Milling is a specification line because it changes flow, blending and dissolution. A 40 mesh powder and a granulated powder can be the same chemistry and different process inputs. Granulation and dilution are available on request, and a declared dilution is a format, not an adulteration; an undeclared one is a different problem. ## What the dosage form needs A capsule or tablet needs flow, a low loss on drying and a particle size that blends evenly. A stick pack or drink mix adds water: 5-HTP is sparingly soluble in water and soluble in dilute acid, so the formula's pH and water activity matter more than the assay percentage. The source also changes the colour and taste of the finished powder, which can matter in a clear sachet. When the source changes, the fill weight may not. Both routes are specified at 98.0–101.0%, so the 5-HTP mass per capsule is set by the assay and the fill, not by the source. What changes is the validation: a new source is a new supplier, a new impurity profile and usually a new stability data set. Switching source also changes the label name, the source declaration, the impurity panel and the validation file; the assay may not move at all. ## What to write into the specification The specification should name the source in the material line, not in a note. “5-HTP (Griffonia simplicifolia seed extract), 98.0–101.0% on the dried basis, CAS 56-69-9” and “5-HTP (synthetic), 98.0–101.0% on the dried basis, CAS 56-69-9” are two different specifications with two different document sets. - Assay by HPLC, 98.0–101.0% on the dried basis. - Identification by IR and UV; loss on drying ≤0.5%; residue on ignition ≤0.1%. - Related substances: individual and total limits, method and quantification limit. - Heavy metals Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg; the micro panel. - Particle size ≥95% through 40 mesh; pack and storage statement. - Source-specific lines: extraction solvent, carrier and pesticide panel for the extract; route, solvents and stereochemistry for the synthetic material. ## When neither source fits If the destination market does not permit 5-HTP, the source does not fix it. If the label promises Griffonia and the drum is synthetic, the mismatch is a labelling defect before it is a quality one. If the formula needs a diluted premix, that is a dilution format, not a third source. And if the brief is for tryptophan, 5-HTP is not a substitute; the two are different label ingredients. The catalog range and the pack are on the product page; the certificate lines are on the COA page; the market question is on the compliance page; the difference from tryptophan is on the comparison page. ### 02.1 5-HTP vs L-tryptophan: form, dose and the label URL: https://nutrition.rainwoodbio.com/products/specialty/5-htp/grades/5-htp-vs-tryptophan/ Reviewed: 2026-11-19 5-HTP and L-tryptophan are different molecules, different CAS numbers and different label ingredients. 5-HTP carries an extra oxygen on the indole ring — C11H12N2O3, CAS 56-69-9 — and L-tryptophan does not: C11H12N2O2, CAS 73-22-3. A 98% assay on either material says nothing about which one is in the drum, and one cannot be substituted for the other on a label. In one line5-HTP and L-tryptophan are different label ingredients; the assay percentage does not make one a substitute for the other. ## Two indole amino acids, one oxygen apart 5-HTP and L-tryptophan side by side | Property | 5-HTP | L-tryptophan | CAS | 56-69-9 | 73-22-3 | Formula | C11H12N2O3 | C11H12N2O2 | Molar mass | 220.23 g/mol | 204.23 g/mol | Label name | 5-HTP or 5-hydroxytryptophan | L-tryptophan | Catalog assay | 98.0–101.0% dried basis, HPLC | 98.5–101.5% dried basis, HPLC | Identity tests | IR and UV | IR and ninhydrin; specific rotation | Principal source | Griffonia seed extract or synthesis | Fermentation or synthesis Both are indole amino acids and both are white to off-white crystalline powders, which is why appearance proves nothing. 5-HTP is hydroxylated at the 5-position of the indole ring; tryptophan is not. 5-HTP is not a grade of tryptophan and tryptophan is not a grade of 5-HTP. The names carry the confusion. 5-HTP is the abbreviation for 5-hydroxytryptophan; oxitriptan is the international nonproprietary name used in medicine files. L-tryptophan is the protein amino acid, and “tryptophan” without a prefix is ambiguous because DL-tryptophan also exists. A purchase order that says “tryptophan” has not named a material. ## The mass conversion is arithmetic, not equivalence The molar masses differ by 16 g/mol, one oxygen: 220.23 against 204.23. That gives a mass ratio of 1.078, so 100 mg of 5-HTP contains the same number of molecules as about 92.7 mg of tryptophan. The arithmetic is exact and it is not a dose equivalence. The two are different ingredients with different specifications, different stability and different regulatory routes; a formula cannot swap one for the other by applying a factor. On the label, the amount is the mass of the named ingredient. A 100 mg 5-HTP capsule declares 100 mg of 5-HTP, not 92.7 mg of tryptophan, and a 500 mg tryptophan capsule declares tryptophan. No conversion factor belongs on the panel. The factor is useful in a laboratory calculation and does not belong in a formulation discussion. The reverse factor, 204.23 ÷ 220.23 = 0.927, is just as exact and just as unusable on a label. It can help a laboratory compare molar concentrations; it cannot turn a 5-HTP specification into a tryptophan specification, and it does not adjust for the different assay ranges, 98.0–101.0% against 98.5–101.5%. ## Regulation follows the ingredient, not the family In the EU, L-tryptophan is an amino acid sold under general food law and national supplement rules; 5-HTP is not a vitamin or mineral and its route depends on the member state, with a novel-food question that follows the source. In the US, both can be dietary ingredients, but 5-HTP carries the pre-1994 or new-ingredient question for the specific material. In the UK, retained food law applies, with Northern Ireland following the EU rules. A permission for one is not a permission for the other. The 5-HTP compliance page sets out the four checks; the L-tryptophan compliance page does the same for the amino acid. ## What the label has to say EU labelling names the ingredient as used: “5-HTP” or “5-hydroxytryptophan” for the isolated material, “Griffonia simplicifolia seed extract” for the extract, with the standardisation stated. “Tryptophan” is not a synonym and cannot stand in for 5-HTP. In the US, the Supplement Facts panel declares the dietary ingredient and the ingredient list names the source; in the UK the same naming principle applies under retained law. If the product is an extract, the label should say so; if it is synthetic, the label should not imply the plant. A “natural” statement is a marketing statement, not a source declaration. ## When to choose which Which material fits which brief | Brief | Material | Reason | Existing product labelled L-tryptophan | L-tryptophan | The label names the amino acid, not 5-HTP | New product named for 5-HTP | 5-HTP | The label and the specification must match | Label wants a Griffonia source | Griffonia extract | Synthetic material does not support the name | Consistent colour and flow wanted | Synthetic 5-HTP | No plant matrix or harvest variation | Market restricts 5-HTP | L-tryptophan, if permitted | The restriction follows the ingredient | Analytical comparison | Both, each with a certificate | Without identity data the comparison is undefined Choose by the label, the market and the source documents. The assay percentage is the last question, not the first. The commercial question is usually framed as a swap, but the file records it as a new material. The label, the market notification, the certificate and the stability data all follow the ingredient name. A buyer who changes the name on the artwork before changing the specification has created a mismatch that no certificate can close. ## What changes when you switch Switching from one to the other changes the label name, the specification, the identity tests, the stability data and the regulatory file. It does not change the assay range: both can sit near 98–101%, which is exactly why the switch is easy to underestimate. Run the new material through the same qualification as a new source, even when the certificate looks familiar. The 5-HTP range is on the product page; the source choice is on the source page; the certificate lines are on the COA page; the L-tryptophan range is on the L-tryptophan page; the assay definition is in the assay note. ### 03 5-HTP is light- and oxygen-sensitive; the pack decides the shelf life URL: https://nutrition.rainwoodbio.com/products/specialty/5-htp/stability/ Reviewed: 2026-11-19 5-HTP is a crystalline powder that keeps well when dry, dark and sealed. Light, oxygen, heat and moisture drive the changes that shorten shelf life, and the pack controls all four. The molecule is the same in every pack; the pack and the storage statement decide how long a lot stays inside specification. In one line5-HTP stays in specification only while the pack keeps light, oxygen and moisture out; an opened or clear pack starts the clock. ## The dry solid In the dry solid, 5-HTP is at its most stable. The catalog loss on drying is ≤0.5%, which describes a low-water powder; keeping it there is the first control. A closed, opaque pack limits moisture pickup and surface oxidation, and a cool store slows the same reactions. An open bin, a clear bag or a warm loading bay removes those controls without changing the certificate. Milling raises surface area. A 40 mesh powder has more exposed surface than a coarse crystal, and the fine fraction is the part that reacts first. That is one reason the particle-size line and the pack belong in the same specification: a fine powder in a clear pouch is a different stability case from the same powder in a foil pouch. ## In solution, the window narrows In solution the window narrows. 5-HTP is sparingly soluble in water and soluble in dilute acid, and the dissolved molecule is exposed to oxygen, light and metal ions at once. A neutral or alkaline solution is the harsher environment for oxidation; an acidic solution dissolves the material more readily but does not remove the oxygen. A stick pack or drink mix therefore needs its own stability work, not an extension of the powder's shelf life. Water activity is the formulation variable that matters most in a dry mix. A powder blend that picks up moisture in a humid room can show caking, colour change and a falling assay before the pack is opened. Control the room, the blend time and the pack, in that order. ## Four factors and one catalyst What changes 5-HTP, and what controls it | Factor | Effect | Control | Light | Photodegradation, colour drift | Opaque or amber pack; closed drum | Oxygen | Oxidation, discolouration, falling assay | Low-oxygen barrier; nitrogen headspace | Heat | Faster reaction during drying and storage | Cool store; controlled drying step | Moisture | Caking, higher water activity, faster oxidation | Sealed pack; low humidity room | Metal ions | Trace iron or copper can catalyse oxidation | Specification limit; equipment control The table is a set of controls, not a ranking. In a clear pack, light and oxygen act together; in a warm warehouse, heat accelerates both. The single change that usually does most is the pack, because it controls three of the five at once. ## The stability protocol A stability protocol for 5-HTP should test the packed material, not the molecule in a lab dish. A programme modelled on ICH Q1A(R2) uses long-term, intermediate and accelerated conditions, with the pack format as a variable: 25 °C/60% RH, 30 °C/65% RH and 40 °C/75% RH are the usual starting points, with time points at 0, 1, 3, 6, 9, 12, 18 and 24 months. For a food ingredient the ICH scheme is a model, not a legal requirement; the destination market may have its own. Conditions and what each one answers | Condition | Purpose | Main tests | 25 °C/60% RH | Real-time shelf life | Assay, related substances, loss on drying, appearance | 30 °C/65% RH | Warmer market or warehouse | Same, plus micro at the end points | 40 °C/75% RH | Accelerated conditions | Assay, related substances, colour | Photostability | Light exposure, clear versus foil | Assay, colour, related substances Test assay, related substances, loss on drying, appearance and colour at each point, and add microbiology and particle size at the long-term points. Photostability is a separate study: a clear pouch and a foil pouch tested side by side answer the light question directly. In-use testing — opening and resealing the 1 kg pouch — belongs in the same program. ## What the formula can and cannot fix The formula can reduce exposure, not change the molecule. An opaque pack, a nitrogen headspace, a low-oxygen barrier and a low water activity are the controls that belong in the specification. An antioxidant or a chelating agent is a formulation decision to be tested against the finished matrix; it is not a default, and it can introduce its own colour or taste. A pH change can help a solution, but it can also change solubility and the label's preparation instructions. What the formula cannot do is rescue a lot that is already outside the related-substance limit, or replace a pack that lets light through. Stability work starts with the material and the pack, then moves to the matrix. ## How the shelf life is assigned The shelf life is assigned to a packed material, not to 5-HTP in general. It comes from real-time data on the declared pack, supported by accelerated data and a documented extrapolation. A 1 kg foil pouch and a 25 kg fiber drum are different packs with different headspace and different opening histories, so one assignment does not automatically cover the other. The storage statement on the certificate and the label should match the data: closed, dry, protected from light. A retest date is not a shelf life; it is the date after which the lot should be re-examined before use. When the pack changes, the assignment is revisited. The catalog range and the pack are on the product page; the certificate lines are on the COA page; the ordering unit is on the MOQ page; the drying test is defined in the loss-on-drying note. ### 04 5-HTP: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/specialty/5-htp/moq/ Reviewed: 2026-11-19 The minimum order for 5-HTP is 1 kg, packed in a foil pouch from a released lot. Production quantities ship in 25 kg fiber drums, and a stock lot is dispatched in 1–7 days. The pack, the source and the destination are settled before a quotation is issued. In one lineA kilogram drawn from a released lot is enough to qualify a source and still comes with the lot record; smaller splits lose that link. ## Why the minimum is 1 kg A 1 kg pack is the smallest unit that keeps its lot number, its certificate and its retained sample together. That combination is what a qualification trial needs: enough material to run the buyer's own identity test, a blend trial and a short stability check, with a documented lot behind it. A smaller split would break the link between the pack and the certificate, which is why the minimum is a pack, not a scoop. A 1 kg order is not a retail sample and it is not a production quantity. It is the unit that lets a buyer qualify a source before committing to drums. The 25 kg drum is the production pack; the two are the same material in different packs, with different headspace and opening histories. ## The pack is part of the specification Packs and formats for 5-HTP orders | Pack or format | Typical use | Notes | 1 kg foil pouch | Qualification, small batch | Light and oxygen barrier; one lot code | 25 kg fiber drum | Production | Food-grade liner; lot and pack label | Granulated | Better flow for capsules | Made to order; process step added | Dilution | Low-dose blends | Declared carrier and assay; made to order The pouch is the light and oxygen barrier as well as the unit of sale. A clear bag is not an equivalent pack. The drum carries a food-grade liner and the lot label; the label should match the certificate, the packing list and the retained sample. ## Lead time and what moves it Dispatch for a stock lot is 1–7 days. A made-to-order granulation or dilution adds a process step, and a new source or a new pack adds a qualification step; both move the date. Documentation can move it too: a certificate with a source-specific line or a destination-specific declaration is prepared before the pack leaves, not after. Lead time is dispatch, not delivery. Transit, customs and the destination's import checks sit outside it, and the buyer's broker should be told what the material is and which documents travel with it. ## Six details a quotation needs A quotation can be firm only when six details are known. Each one changes the material or the pack, so a quote that leaves one open is provisional. - Material and source: Griffonia extract or synthetic, with the label name. - Assay, method and basis: 98.0–101.0% by HPLC on the dried basis, plus any tighter in-house limit. - Quantity and pack: 1 kg pouches, 25 kg drums, or a granulated or diluted format. - Destination market: the country and, in the EU, the member state. - Documents: COA, source declaration, contaminant report, allergen and GMO statements. - Delivery terms: the Incoterm and the delivery point. A buyer who supplies all six gets a defined offer; a buyer who supplies the quantity alone gets a provisional answer. The compliance page explains why the destination belongs in the list. ## Samples and the qualification lot A sample should be drawn from a released lot, carry the same lot code as the certificate, and be large enough for the buyer's identity and blend trials. A sample without a lot code is a marketing item, not a qualification sample. The retained sample is the reference if a later result is disputed; it should be kept under the same storage statement as the shipment. A sample does not replace the 1 kg order. The order is the first pack with a commercial lot behind it, and the qualification trial is usually run on that pack. If the trial needs a granulated or diluted format, say so before the lot is drawn, because the format is made to order. ## Terms that belong on the order Terms that belong on the order: the specification revision, the lot code, the pack, the Incoterm, the documents, the retest date and the storage statement. Payment terms are set in the quotation; this page is not a quotation. A non-conforming lot is handled against the specification and the retained sample, not against the certificate alone. The order should also name who receives the documents: the buyer's quality team, the co-packer or the importer. The pack label, the certificate and the customs description should use the same name, because a mismatch at the border is resolved with documents, not with material. The pack and the certificate are on the COA page; the storage case is on the stability page; the unit definitions are in the MOQ note; the material itself is on the product page. ### 05 The regulatory file for 5-HTP URL: https://nutrition.rainwoodbio.com/products/specialty/5-htp/compliance/ Reviewed: 2026-11-19 5-HTP is supplied as crystalline 5-hydroxytryptophan, CAS 56-69-9. The catalog specification is the starting point; the regulatory file is built around the exact material, the destination and the finished-product route. The buyer's regulatory team confirms that route. This page lists the documents and checks that belong in the file, so the specification and the commercial pack can be reviewed together. In one lineThe specification describes the material; the regulatory file shows the route, the limits and the label for the destination. ## What the file contains A 5-HTP file answers four questions together: the identity and specification version being bought (Griffonia extract or fermentation route), the lot and its certificate, the destination's limits and label rules, and what changes if the source or process changes. The COA answers the lot, the TDS the specification and the SDS the handling; none of them settles the route. The file should also contain the allergen and GMO statements, the origin record, the residual-solvent statement and any customer-specific declaration. Where a statement is not available for the lot, the gap should be named before the order, not discovered at the port. A document list with version numbers is more useful than a folder of undated PDFs. ## European Union The EU file is built from the specification, the contaminant results and the label. The buyer's regulatory team identifies the route for the destination member state and confirms that the specification matches the material being placed on the market. General food law, labelling and contaminant rules apply alongside any product-specific route; the current consolidated text is the reference, not a summary. ## United States The US file is built around the exact dietary ingredient or food substance and its intended use. The supplier should be able to name the basis it relies on and point to the supporting document; the buyer confirms that the basis covers the finished product and the claim. The label and the claim are reviewed separately from the certificate. ## United Kingdom Great Britain and Northern Ireland are checked separately. The GB file uses the current GB register and GB labelling rules; Northern Ireland follows the EU framework. The buyer's regulatory team confirms which of the two applies to the destination and keeps the evidence with the order. ## Contaminants and limits The contaminant panel is a finished-product calculation, not only a drum result. The table below is the usual starting point for a food-supplement file; the current destination text and the daily dose decide the final limit. Contaminant limits to confirm for the finished product | Parameter | Typical supplement reference | What the file should show | Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method, limit and the finished-product calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception that applies | Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result and method | Arsenic (As) | Customer or market limit | The agreed limit and the method, stated on the certificate ## Label and claims The label names the material, the quantity and the source in the form the destination requires. The claim review is separate: the brand's regulatory reviewer confirms that the wording is allowed for the product, the form and the market. The certificate does not approve a claim, and a claim does not change the specification. ## Claims for 5-HTP As of this review, no EU health claim is authorised for 5-HTP itself, and an entry for tryptophan or melatonin does not transfer to it. Statements about sleep, mood or serotonin are health claims, not descriptions of the material, and they need the destination's authorisation or the US structure/function route with its disclaimer. Some markets restrict 5-HTP outright, so the first claim question is whether the ingredient may be sold at all. This site makes no health claim: it publishes the specification and the file. A formulation statement such as “5-HTP is supplied as a crystalline powder” describes the material and is safe on a technical page. ## Documents for the 5-HTP file The buyer's file needs the lot COA with the HPLC assay on the dried basis, the related-substance profile, IR and UV identity, the metal panel and the micro count. Add the source declaration — Griffonia simplicifolia seed extract or synthetic route — because the two carry different supply-chain and novel-food evidence. The pack also needs the TDS, the SDS, allergen and GMO statements, the residual-solvent statement and the origin record. For the US, include the pre-1994 or new-dietary-ingredient basis for the material; for the EU, the member-state route and the source-specific novel-food position. The 5-HTP product page carries the catalogue specification. For this product, the file starts with the catalog specification and the lot certificate. The buyer adds the destination route, the finished-product dose and the label review; the supplier keeps the source, process and pack under change control. ## Checklist before the first order - Specification version, CAS and the exact form are named. - COA, TDS, SDS, allergen, GMO, origin and residual-solvent statements are on file. - The contaminant results are converted to the finished-product dose. - The label and the claim have been reviewed for the destination. - The source, process and pack are under change control. - The quotation, the specification and the certificate refer to the same version. The product page carries the catalog specification; the COA page explains the lot certificate; the identity page covers the analytical evidence. The quality page describes the release file, and the regulatory notes provide the framework references. ### 06 How we prove a 5-HTP lot is 5-hydroxytryptophan URL: https://nutrition.rainwoodbio.com/products/specialty/5-htp/identity/ Reviewed: 2026-11-19 A 5-HTP lot is 5-hydroxytryptophan when four independent lines agree: the document names the material and its source, IR and UV match the reference, the HPLC assay and related-substance profile fit the specification, and the source record explains the impurity pattern. The assay percentage alone does not prove identity; a tryptophan blend and a diluted extract can both be made to pass a number. In one lineIdentity is a stack, not a percentage: the spectra, the chromatogram, the lot record and the source have to point at the same material. ## Four layers, four questions Evidence layers for a 5-HTP lot | Layer | Evidence | What it establishes | Limit of the evidence | Document | Name, CAS 56-69-9, source, manufacturer, lot code | The claimed identity and the chain of custody | Says nothing about the material itself | Structure | IR and UV against a reference | An indole amino acid with this substitution pattern | Cannot quantify a second indole | Separation and quantity | HPLC assay and related substances | Amount present and the surrounding peak pattern | Cannot distinguish plant from synthetic origin | Source | Manufacturer declaration and lot record | Which production route the lot followed | Depends on the declaration being accurate The order matters. A document without a spectrum leaves the structure open; a spectrum without a related-substance panel leaves the purity open; a chromatogram without a source record leaves the route open. Only the four together describe the material. The document layer is where most purchasing files stop: a certificate with a name and a CAS number is read as identity. It is the weakest layer, because it repeats what the seller typed. The source record strengthens it only when the manufacturer is named and the lot code can be followed to a packing record. The spectra and the chromatogram are what the buyer can re-run. ## The ratio that exposes a blend 5-HTP and tryptophan differ by one oxygen: 220.23 against 204.23 g/mol. On a chromatogram the two elute at different times, and a related-substance method that resolves them gives a ratio between the 5-HTP peak and the tryptophan peak. In a clean synthetic lot that ratio is large; in an extract it reflects the plant matrix and the purification; in a blend it moves toward the second material. The ratio is a fingerprint, not a limit on its own. Mass balance gives a second check. Assay, loss on drying, residue and related substances should account for the whole powder. A lot whose assay is high while the other three lines are small leaves a gap that the certificate has not named. The gap is a question, not a rejection. ## What IR and UV show, and what XRD adds IR identifies the functional groups: the indole N–H, the carboxylate and the hydroxyl that distinguishes 5-HTP from tryptophan. UV sees the indole chromophore, with an absorption in the 270–280 nm region, and a diode-array detector compares the peak's spectrum with the standard. The catalog identity is “IR and UV conform”, and both should be run against a reference spectrum on the same instrument. X-ray diffraction answers a different question. It describes the solid state — whether the powder is crystalline, and whether a second crystalline phase is present. It is not the primary identity test for 5-HTP, and a clean diffraction pattern does not prove the molecule; it is an additional check when a blended or recrystallised lot is suspected. The XRD note explains what the technique can and cannot see. ## The routes that put the wrong material in the drum Substitution routes and the evidence that detects them | Substitution | Signal in the data | Request | Tryptophan added or substituted | A tryptophan peak at mass 204 shifts the peak ratio | Individual related substances with limits | Other indole species | Unnamed peaks, colour drift, assay below range | LC-MS identification of the unknown peak | Sugar or salt diluent | Moisture or residue high, assay low | Mass balance from one sample | Synthetic sold as Griffonia | Spectra and assay agree, source record does not | Manufacturer declaration and plant record | Wrong stereoisomer | Identical UV and mass, different optical rotation | Specific rotation or chiral HPLC | Relabelled old stock | Colour and total impurities move; packing date old | Lot record, packing date, retained sample The most direct substitution is tryptophan, because it is structurally close and widely traded; it shows as an extra peak and a changed ratio. A sugar or salt diluent shows in the residue, the loss on drying and the assay. The source substitution is the hardest: once both materials are at 98%, the assay cannot tell, so the source declaration, the manufacturer and the lot record carry the question. ## Writing identity into the specification Write seven lines: name with source and CAS 56-69-9; identification by IR and UV; assay by HPLC at 98.0–101.0% on the dried basis; related substances with individual and total limits, method and quantification limit; loss on drying ≤0.5%; residue on ignition ≤0.1%; metals, micro and particle size. Add specific rotation or chiral HPLC if the stereoisomer is part of the claim. Two of those lines are identity, one is quantity, one is purity, and three are physical or contaminant. A specification that says “98%” and nothing else describes a number, not a material. If the lot is an extract, the specification should also name the extraction solvent and the carrier, because both can appear in the chromatogram. If it is synthetic, name the route and the solvents. Identity is not only the molecule; it is the molecule plus the process that made it. ## Five questions for a supplier - Who manufactured the lot, and is the source Griffonia extract or synthetic? - Can you provide the IR and UV spectra against a reference, not only a “conforms” line? - What are the individual and total related substances, the method and the quantification limit? - Is the stereoisomer specified, and how is it measured? - Does the lot code match on the certificate, the pack and the retained sample? The catalog specification is on the product page; the certificate lines are on the COA page; the source choice is on the source page; the infrared method is described in the FTIR note. ### 01 What the COA for melatonin actually contains URL: https://nutrition.rainwoodbio.com/products/specialty/melatonin/coa/ Reviewed: 2026-11-19 The certificate for a melatonin lot reports appearance, IR identification, HPLC assay on the dried basis, melting range, loss on drying, residue on ignition, particle size, heavy metals and microbiology. Each line needs the test, the method and the release limit. The values here are the catalog specification; the batch COA confirms a particular pouch or drum. In one lineA melatonin certificate is auditable only when the assay, the drying basis, the melting range and the impurity profile are reported together, each against a named limit. ## Reading the certificate line by line A useful certificate survives a line-by-line audit. Each line needs the test, the method, the release limit and the lot result. “Assay 99%” on its own leaves the method, the basis and the rest of the powder unstated. Identity, assay and purity · melatonin | Test | Method | Acceptance limit | Appearance | Visual | White to pale-white crystalline powder | Identification | Infrared spectroscopy | Conforms to the reference spectrum | Assay (dried basis) | HPLC with UV detection | 98.5–101.5% | Melting range | Capillary melting | 117–120 °C | Loss on drying | Gravimetric | ≤0.5% | Residue on ignition | Gravimetric | ≤0.1% | Related substances | HPLC | Reported; limits agreed in the specification | Particle size | Sieve analysis | ≥95% through 40 mesh Heavy metals and microbiology · release limits | Test | Method | Acceptance limit | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent The first table covers identity and purity; the second covers contaminants. Melting range and IR are identity tests, but they also respond to impurities and to the solid form, which is why they belong beside the assay. ## What the dried basis means for the result Melatonin is assayed on the dried basis, so the HPLC result is corrected for the loss on drying measured on the same sample. If a lot assays 99.0% on the dried basis and loses 0.4% on drying, the as-is content is 98.6%: 99.0 × (100 − 0.4) / 100. The difference is small at a 0.5% moisture limit, but it matters when a formulator converts a label amount into powder mass. An assay window that reaches 101.5% is an acceptance allowance around a reference standard and a method, not a statement that the powder is more than pure. The upper end absorbs the uncertainty of the standard, the sample preparation and the integration. Read the number as a window around 100%, not as a purity ranking. The HPLC method should be named precisely enough to repeat: a reversed-phase C18 column, a mobile phase, UV detection in the 220–280 nm range with the wavelength stated, a system-suitability check and a peak-purity test. A retention time alone is not identity; it is one line of evidence that the main peak behaves like the reference. ## The release gate and the measured result The release limit is the boundary the lot must meet; the batch result is what the laboratory actually measured. The two belong in separate columns, each paired with its method. A results column that repeats the acceptance range tells the reader nothing about the lot. Related substances are the line most often left vague. The catalog assay window permits up to 1.5% of material that is not melatonin, and the assay alone does not say whether that material is a precursor indole, a residual solvent or a carrier. If the destination or the customer needs an individual and a total limit, those limits belong in the specification, and the certificate should report the result against them. The melting range is a release test as well as an identity check. A lot that melts at 114–118 °C falls outside the 117–120 °C window. A range that starts inside the window but spans eight degrees is a warning even when both endpoints look acceptable, because a wide range usually means the sample is not one clean solid. ## What shifts from lot to lot Assay, loss on drying, colour, particle size and the related-substance profile move from lot to lot. Synthesis and recrystallisation set the impurity profile; drying sets the loss on drying; milling and sieving set the mesh. A cream or yellow tint can point to oxidation while the assay still passes; investigate it, but do not release the lot on assay alone. A trend across several lots carries more information than a single result close to an edge. An assay drifting low, a loss on drying climbing, or a new small peak at a constant retention time is a process signal. Ask for the trend and the batch record, not only the latest certificate. ## Bringing in an outside laboratory Bring in an independent laboratory for a first consignment to a regulated market, a new source, a contested result, or a customer specification beyond the supplier's certificate. The useful panel is an HPLC assay with related substances, IR, melting range, residual solvents by GC where the route uses them, elemental impurities and microbiology, all on one sample. Ask for the detection and quantitation limits. A “not detected” entry without a limit describes the method's sensitivity, not the sample. The assay report should also name the column, the wavelength, the injection volume and the integration method, not only the percentage. When a result is disputed, the outside laboratory can act as referee. Give it the specification, the supplier's certificate and the material held back, and ask which tests separate melatonin from a related indole. The material tested has to be the material kept. ## Six lines to put side by side Compare six lines: assay and method; loss on drying; melting range; IR; related-substance profile; metals, microbiology and pack. Two quotations can match on assay and still describe different powders if the other five differ. Traceability is the next question. The code on the pouch should match the code on the certificate and on the sample kept for reference. The certificate should name the manufacturer and the drying and milling steps. A genuine certificate can still describe a different pack from the one being unloaded. Catalog values are on the melatonin product page. The identity tests are broken down on the identity page; the pure versus 1% choice is on the grade page; the release workflow is described on the quality page. The HPLC method is described in the HPLC method note, and the drying correction is defined in the loss-on-drying entry. ### 02 Melatonin 99% or a 1% dilution: choosing a grade URL: https://nutrition.rainwoodbio.com/products/specialty/melatonin/grades/ Reviewed: 2026-11-19 The catalog grade is a crystalline powder assayed at 98.5–101.5% on the dried basis and sold in the trade as “melatonin 99%”. The alternative is a 1% dilution: one part melatonin to 99 parts carrier by mass, made so that a small amount of melatonin can be weighed and blended accurately. The choice turns on the mass a unit can carry and the weighing accuracy of the plant, not on a stronger or weaker effect. In one lineThe grade is a handling decision: crystalline powder when the unit can carry and weigh it, a 1% dilution when the melatonin mass per unit is too small for accurate weighing. ## “99%” is an assay window, not a fixed strength The figure is shorthand for the 98.5–101.5% release window. A certificate result anywhere between 98.5% and 101.5% meets the catalog, so the batch COA, not the trade name, is the number that applies to the drum. A trade name that says 99% is a round statement about a window; the certificate is the evidence behind it. The 1% dilution is a pre-blend, not a second purity grade. Nominally it carries 10 mg of melatonin per gram, and the actual content is on the dilution's COA. The carrier is named in the specification and in the finished product's ingredient list. It is not a carrier that can be assumed from the word “dilution”. The catalog lists three formats: crystalline powder at 40 mesh, a 1% dilution on request, and a granulated form on request. Granulation changes flow and dust, not the assay window. The grade and the physical form are separate decisions, and a quotation should name both. ## The two grades side by side Crystalline melatonin and a 1% dilution · what differs | Parameter | Crystalline grade | 1% dilution | Melatonin content | 98.5–101.5% (dried basis) | 1.0% nominal; assay on the dilution COA | Melatonin per gram | 985–1,015 mg | 10 mg nominal | Powder mass for 1 mg melatonin | About 1.0 mg | About 100 mg | Carrier | None | About 99% of the powder mass | Typical unit | Capsule, tablet, larger stick pack | Low-dose capsule, stick pack, small batch | Analytical work | Assay, loss on drying, related substances | Plus carrier identity and blend uniformity The table is arithmetic, not a ranking. The pure grade is not “better” and the dilution is not “weaker” in the sense of quality; they put different masses of the same molecule into the same unit. What changes is how much powder the unit must hold and how much of the fill is carrier. ## Mesh, flow and static 40 mesh is a sieve opening of about 425 µm. The crystalline powder is light, and static can make it cling to a scoop, a blender wall or a pouch. At a milligram target that cling is a real weighing error, not a housekeeping detail. The pure grade rewards a plant that can control humidity, grounding and weighing tolerance. The 1% dilution's flow depends on the carrier. If the carrier is coarser or denser than the melatonin, the blend can segregate in a hopper; if it is finer, the blend can dust. The carrier's particle size should be matched to the melatonin and to the mixing equipment, and the blend should be validated rather than assumed. Granulation can reduce dust and improve flow, but it is a third format, not a fix for a badly matched carrier. ## What the unit can carry The fill weight is set by the capsule size, the tablet weight or the stick-pack fill, and by the blend's bulk density. The melatonin mass is a fraction of that fill. A 1 mg target from the crystalline grade is about 1 mg of powder; from the 1% dilution it is about 100 mg. The first is difficult to weigh on a production scale, the second is easy to weigh but uses 100 mg of the fill. A 5 mg target is about 5 mg of the crystalline powder or about 500 mg of the 1% dilution. If the capsule cannot hold 500 mg, the dilution is the wrong choice. A 0.5 mg target is about 0.5 mg of the pure powder or about 50 mg of the dilution, and the pure powder is usually below the reliable weighing range of a production balance. These are mass calculations for formulation, not intake instructions. The same arithmetic applies to a stick pack. A 2 g fill of a 1% dilution carries about 20 mg of melatonin; the same fill of the crystalline grade would carry about 2 g, which is far outside a low-dose unit. The dilution is what makes a small target compatible with a large fill. ## What changes when you switch Switching grade changes the assay basis, the loss on drying, the mesh, the microbiological load, the label, the stability and the blend validation. The dilution's COA should report the melatonin content of the blend, the identity and specification of the carrier, and the uniformity of the blend. The pure lot's COA should be available as the input, so the dilution can be traced back to a released lot. The label changes with the grade. The finished product declares the amount of melatonin, not the mass of the pre-blend, and the carrier belongs in the ingredient list. In the US the Supplement Facts panel carries the melatonin quantity; in the EU the ingredient list and the nutrition declaration carry the declaration. A label that calls a 1% blend “99% melatonin” is wrong on its face. Order quantity changes too. One kilogram of the crystalline grade contains about 990 g of melatonin; one kilogram of the 1% dilution contains about 10 g. A trial that needs 100 g of melatonin needs about 101 g of the pure powder or about 10 kg of the dilution. The minimum order is the same 1 kg pack, but the active mass behind it is not. ## When the other grade is the wrong answer The crystalline grade is wrong when the unit needs less than the plant can weigh reliably. The 1% dilution is wrong when the unit cannot carry the carrier mass, when the label cannot declare the carrier. Granulation is wrong when the application needs a fine powder and the flow problem is really a carrier problem. Do not switch grade to fix a microbiological result, a colour issue or a label claim. Those are separate controls, and a new grade brings a new carrier, a new blend step and a new set of evidence. The dose, blend and label consequences of the switch are worked through on the 99% versus 1% page. The catalog values are on the melatonin product page; the certificate lines are on the COA page; the pack sizes and the 1 kg minimum are on the ordering page. The assay term is defined in the assay glossary entry. ### 02.1 Melatonin 99% vs 1% dilution: dose, blend and the label URL: https://nutrition.rainwoodbio.com/products/specialty/melatonin/grades/melatonin-1-percent/ Reviewed: 2026-11-19 A 99% crystalline powder and a 1% dilution contain the same molecule at different concentrations, so the choice is arithmetic and mechanical: how many milligrams of melatonin a unit needs, how much powder the unit can hold, and how uniformly the plant can disperse it. The label, the carrier declaration and the blend validation follow from that choice. Neither grade is a stronger version of the other. In one lineThe 1% dilution is not a weaker grade; it is the same melatonin spread over a carrier so a small amount can be weighed and blended accurately. ## Two concentrations, one substance The crystalline grade is 98.5–101.5% melatonin on the dried basis, which is 985–1,015 mg per gram. The 1% dilution is a pre-blend of one part melatonin with 99 parts carrier by mass, nominally 10 mg per gram. The word “dilution” describes the concentration; it does not describe a lower quality band, a different molecule or a different regulatory status. Melatonin content by grade · nominal values | Grade | Per gram | Per 100 g | Per 1 kg | Crystalline, 99% | 985–1,015 mg | 98.5–101.5 g | 985–1,015 g | 1% dilution | 10 mg nominal | 1 g nominal | 10 g nominal The 1% figure is nominal because the dilution has its own assay and its own release limit. It is not exactly 10.000 mg per gram, and a formulator should use the dilution's certificate, not the name, for the conversion. The same rule applies to the crystalline grade: 99% is a trade shorthand for a window. ## The arithmetic of a switch Mass of powder = target melatonin ÷ concentration. At 99%, a 1 mg target needs about 1.01 mg of powder; at 1%, it needs about 100 mg. At 3 mg, the pure powder needs about 3.03 mg at 99% and the dilution needs about 300 mg. At 5 mg, the pure powder needs about 5.05 mg at 99% and the dilution needs about 500 mg. The dilution buys weighability by adding carrier mass in proportion. Use the as-is assay for weighing, not the dried-basis figure. If the lot assays 99.0% on the dried basis and loses 0.4% on drying, the as-is content is 98.6%, so the divisor is 0.986, not 0.990. The difference is small at a 0.5% moisture limit, but it is a real difference at a milligram target. An overage is a separate decision. The finished-product manufacturer sets the label amount, the assay window and any manufacturing overage; the grade choice only sets the powder mass. A dilution does not correct a label that is wrong, and a pure grade does not correct a blend that is not uniform. ## Uniformity is the real constraint A 1% dilution is not automatically uniform. The melatonin and the carrier must be mixed so that every sample of the blend carries the same ratio, and the blend must stay uniform through storage, conveying and filling. A coarse carrier and a fine melatonin can segregate; a fine carrier and a static-prone melatonin can dust; a short mix can leave islands of concentrate. Blend risks · crystalline grade versus 1% dilution | Risk | Crystalline 99% | 1% dilution | Weighing error at a low target | High; the mass is near the balance limit | Lower; the mass is about 100 times larger | Segregation | Local high-concentration pockets | Carrier and melatonin can separate if mismatched | Dust and static | High; fine crystalline powder | Lower, but carrier-dependent | Carrier load | None | About 99% of the powder mass Validate the blend rather than assume it. Take samples across the blender and from the filled units, assay them for melatonin, and set an acceptance criterion before the run. A relative standard deviation of 5% or less across samples is a common internal target, but the criterion belongs to the product and the manufacturer, not to this page. A single assay of a grabbed sample is not a uniformity study. Geometric dilution, a carrier matched to the melatonin's particle size, a defined mixing time and a controlled fill are the usual controls. Granulation can improve flow and reduce dust, but it adds a process step and its own validation. ## What the label must say The label declares the amount of melatonin, not the mass of the pre-blend. A unit made from 300 mg of a 1% dilution carries about 3 mg of melatonin; the Supplement Facts panel or the nutrition declaration states the 3 mg, and the ingredient list states the carrier. A label that declares “300 mg melatonin” because 300 mg of blend was used is wrong by a factor of 100. In the US, the Supplement Facts panel carries the quantity and the ingredient must be declared by its common name. In the EU, the ingredient list and the nutrition declaration carry the declaration, and the carrier is an ingredient in its own right. The carrier must be permitted in the destination and must be declared; a carrier that is acceptable in one market may not be acceptable in another. The regulatory route does not change with the concentration. A 1% dilution is still melatonin for the purpose of the destination's rules, and the finished product's classification still turns on the market, the dose per unit and the presentation. The label claims are governed by the same claim rules as the pure grade: no disease claim, and only authorised claims where the market requires authorisation. ## When to choose which Grade choice by unit and batch | Situation | Choice | Why | Low-dose unit, below 1–2 mg | 1% dilution | The powder mass is large enough to weigh accurately | Higher-dose capsule or tablet | Crystalline 99% | The mass fits the unit without a carrier | Large-fill stick pack | 1% dilution or granule | Dispersion and flow across a large fill | Bench or pilot batch | Crystalline 99% | Flexible weighing and no carrier to qualify | Dust-sensitive plant | Granule | Granulation controls dust and flow Choose the pure grade when the unit can carry the mass and the plant can weigh it. Choose the dilution when the target is too small for the balance or too small to disperse in the fill. Choose a granule when the problem is flow or dust rather than concentration. If the unit cannot carry the carrier mass, the dilution is the wrong answer even when the target is small. ## What to ask for Ask for the dilution's own COA: melatonin content, carrier identity and specification, loss on drying, microbiology and the blend-uniformity result. Ask for the pure lot's COA behind the dilution, so the input is traceable. Ask how the dilution is made, how the blend is validated and how the carrier is declared in the destination. The grade comparison is on the grade page; the certificate lines are on the COA page; the pack sizes are on the ordering page; the catalog values are on the melatonin product page. The assay term is defined in the assay glossary entry. ### 03 Melatonin is light-sensitive; the pack and the matrix decide the shelf life URL: https://nutrition.rainwoodbio.com/products/specialty/melatonin/stability/ Reviewed: 2026-11-19 Melatonin is a crystalline solid that loses assay under light, heat and oxygen, and the loss is faster once it is dissolved or dispersed in a matrix. The 1 kg foil pouch is the light and moisture barrier; the 25 kg fiber drum is the outer pack. The finished product's shelf life is set by the matrix and the pack, not by the raw material's catalog assay. In one lineLight, heat and oxygen degrade melatonin, so the pack has to exclude light and moisture and the shelf life has to be measured in the matrix that will be sold. ## The solid is the easier case The dry powder is the easier case to protect, but it is not inert. Keep the pouch sealed, cool, dry and dark. The catalog loss on drying is ≤0.5%; a powder that picks up moisture can clump and hydrolyse, and the moisture is then part of the as-is mass. The melting range of 117–120 °C is far above ambient, but a drying step or a hot blender can approach it. Check the powder temperature, not the jacket temperature. The foil pouch is the light barrier. A fiber drum alone is not, so do not decant the powder into clear containers or leave the pouch open on the line. A repack is a new pack with a new exposure history, and it needs its own label and its own stability assumption. The raw material's retest period is supported by the supplier's data on the pack. It is not a finished-product shelf life. A retest period says the material can be re-examined after that interval; a shelf life says the finished product still meets its label at the end of the period. ## The liquid matrix is the harder case Melatonin is sparingly soluble in water and soluble in alcohol. In solution, hydrolysis and photo-oxidation are faster, and pH, solvent, oxygen and light all matter. A liquid, a syrup or a ready-to-drink matrix needs its own study; the solid certificate does not predict it. A suspension adds settling and re-dispersion to the problem. A gummy adds water activity and a hot process step. A stick pack adds moisture pick-up and, if the film is clear, light. In each case the question is not “how stable is the powder” but “how much assay remains in this matrix, in this pack, at this storage condition, at each time point”. Do not transfer the raw material's retest period to the finished product. The matrix, the pack and the storage condition are different variables, and a result in one of them does not answer the others. ## Light, heat, oxygen and moisture Degradation factors · what they do and how to control them | Factor | What it does | Control | Light | Photo-oxidation, colour change, related substances | Foil pouch, opaque secondary pack, dark storage | Heat | Degradation near the melting range; drying losses | Keep process temperature well below 117 °C | Oxygen | Oxidation, especially in solution | Sealed pack; nitrogen blanket where the matrix needs it | Moisture | Loss on drying rise, hydrolysis, clumping | Sealed foil, controlled humidity, dry blending Light is the first factor in the product notes because the indole ring absorbs ultraviolet light and the photoproducts are not melatonin. A clear jar on a laboratory shelf is a light-exposure experiment, not storage. The same applies to a clear stick-pack film and to a transparent label window. ## A stability protocol that answers the question Use ICH Q1A(R2) as a guide, not as a legal mandate for a food ingredient. A long-term condition of 25 °C/60% RH or 30 °C/65% RH, an accelerated condition of 40 °C/75% RH for six months, and a photostability study along the lines of ICH Q1B cover the usual questions. A hot, humid destination may call for 30 °C/75% RH. Test the product in the pack that will be sold, not in a laboratory jar. Include a dark control beside the light-exposed sample, and keep the storage condition and the time points in the protocol: 0, 3, 6, 9, 12, 18 and 24 months are a common set. Test assay, related substances, loss on drying, appearance, melting range and microbiology. The assay alone can stay inside its window while the related-substance profile moves. Accelerated data support an early shelf life; real-time data confirm it. Do not extrapolate beyond the data, and do not let a six-month accelerated result become a two-year shelf-life statement without a real-time bridge. ## The matrix decides Matrix, exposure and the tests that matter | Matrix | Main exposure | What to test | Capsule | Low, if the shell is opaque | Assay, loss on drying, related substances | Tablet | Compression heat and moisture | Assay, related substances, appearance | Stick pack | Moisture; light if the film is clear | Assay, loss on drying, colour | Gummy | Water activity and heat | Assay, related substances, colour | Liquid | Hydrolysis, light and oxygen | Assay, related substances, pH A capsule is the easiest matrix because the powder stays dry and the shell can be opaque. A tablet is harder because compression generates heat and the excipients carry moisture. A stick pack is a dry matrix with a large surface area and a film that may or may not block light. A gummy and a liquid are the hardest cases, and neither can borrow the powder's retest period. ## Assigning the number The shelf life is a number supported by data on the matrix, the pack and the storage condition. It is not in the catalog because it changes with each of those. The raw material's retest period and the finished product's shelf life are different numbers, and a customer who asks for “the shelf life of melatonin” is really asking for the shelf life of a particular pack and matrix. Assign a conservative period until real-time data cover it, then extend only with data. The label storage statement must match the study: “store in a cool, dry place, protected from light” is a statement about the pack and the conditions tested, not a substitute for the study. If the pack changes, the statement and the data have to be re-checked. The certificate lines are on the COA page; the pack sizes are on the ordering page; the release workflow is on the quality page. The HPLC assay used in the study is described in the HPLC method note, and the moisture term is defined in the loss-on-drying entry. ### 04 Melatonin: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/specialty/melatonin/moq/ Reviewed: 2026-11-19 The minimum order is 1 kg, packed in a sealed light-barrier foil pouch; production quantities ship in 25 kg fiber drums. Lead time is 1–7 days from released stock. A quotation needs six details before it can be firm, and the destination market is one of them. In one lineOne kilogram is the trial unit: enough to qualify a lot and run a bench batch, small enough that the first order does not become inventory. ## Why 1 kg is the minimum One kilogram of the crystalline grade contains about 990 g of melatonin; one kilogram of the 1% dilution contains about 10 g. The same minimum serves both because the unit is the pack, not the active mass. The buyer is qualifying a released lot, not buying a catalogue number. A 1 kg pouch covers a bench batch, a label trial, a small stability pilot and a retained sample. It is large enough to run an incoming test and a blend trial, and small enough that a failed trial does not leave a drum in the warehouse. Production then moves to the 25 kg drum. The minimum is not a sample sachet. It is a sealed pack from a released lot with a certificate, a lot code and a retained sample. A supplier who offers a smaller “sample” without those documents is offering a different kind of evidence. ## The pouch and the drum Catalog packs · net content and function | Pack | Net content | Function | Typical use | Foil pouch | 1 kg | Light and moisture barrier; sealed unit | Trial, sample, small batch | Fiber drum | 25 kg | Outer pack for handling and stacking | Production The pouch is the barrier; the drum is the outer pack. Do not decant into a clear container, and do not leave an opened pouch on the line. The pack label should carry the product, the lot code, the net content, the storage statement and the SDS reference. A 1% dilution or a granulated grade may use the same outer pack with a different inner configuration. The pack is confirmed on the order, and the confirmation should name the grade, the net content and the inner material. ## One to seven days, and what moves it The catalog lead time is 1–7 days from released stock. Custom work moves it: a 1% dilution, a granulation, a non-standard mesh or an additional test adds a process step and a release step. Documentation can move it too, especially a COA in the customer's format, a third-party test or a legalised certificate of origin. The clock starts when the specification, the quantity and the destination are confirmed, not when the enquiry arrives. Ask for the ship date and the lot code, not only the lead time. A date without a lot is a promise about a stock position, not about a pack. ## Six details a quotation needs - Product and grade. Crystalline 40 mesh, a 1% dilution or a granulated form. - Quantity and pack. The number of 1 kg pouches or 25 kg drums, and the total net weight. - Destination market and delivery point. The country of use and the port or warehouse. - Intended use and finished-product route. Capsule, tablet, stick pack or other, and the market route. - Specification and tests. Related substances, residual solvents, metals, microbiology, or a customer method. - Delivery terms and documents. Incoterms, COA, SDS, origin, allergen statement and any legalisation. Without items 3 and 4 a quotation cannot be checked against the market. Without item 5 it cannot be compared with another supplier's. The six items are also the basis of the order confirmation, so a change after the quotation is a change to the specification, not only to the paperwork. ## What a sample proves The 1 kg pouch is the sampling unit. A sample drawn from it is a sample of that lot, not of the catalog. Ask for the lot code, the COA and the retained sample reference, and test the sample with the same methods you will use for incoming inspection. A sample is not a reservation. Stock moves, and a lot that is available at the sample stage may be gone at the order stage. If the trial is scheduled, confirm the lot and the quantity before the trial starts. For a 1% dilution, the sample should include the dilution COA, the carrier specification and the blend uniformity result. A sample of the pure lot behind the dilution is useful as the input record, but it is not a substitute for the dilution's own certificate. ## The commercial points The terms that belong in the order are the Incoterm, the payment terms, the claims window, the retest period, the return or replacement basis, the lot retention period and the quality agreement. The claims window should be long enough for the buyer's incoming test; the retained sample should be held for the agreed period. A quality agreement can fix the specification, the change-notification rule and the audit right. It should also say what happens when a certificate and an incoming result disagree, and which laboratory decides. Those points are easier to agree before the first shipment than after a disputed drum. The quotation is built from the six items above. The grades are compared on the grade page; the certificate lines are on the COA page; the pack and storage limits are on the stability page. The catalog specification is on the melatonin product page; the release workflow is on the quality page, and the destination-market file is set out on the compliance page. ### 05 The regulatory file for Melatonin URL: https://nutrition.rainwoodbio.com/products/specialty/melatonin/compliance/ Reviewed: 2026-11-19 Melatonin is supplied as crystalline melatonin, CAS 73-31-4. The catalog specification is the starting point; the regulatory file is built around the exact material, the destination and the finished-product route. The buyer's regulatory team confirms that route. This page lists the documents and checks that belong in the file, so the specification and the commercial pack can be reviewed together. In one lineThe specification describes the material; the regulatory file shows the route, the limits and the label for the destination. ## What the file contains A complete file answers four practical questions. What is the material, and which specification version is being bought? Which lot is being released, and what does its certificate report? Which limits and label rules apply to the finished product? And what changes if the source, the process or the pack changes? The certificate of analysis answers the lot question, the technical data sheet answers the specification question, and the safety data sheet answers the handling question. None of them answers the route question on its own. The file should also contain the allergen and GMO statements, the origin record, the residual-solvent statement and any customer-specific declaration. Where a statement is not available for the lot, the gap should be named before the order, not discovered at the port. A document list with version numbers is more useful than a folder of undated PDFs. ## European Union The EU file is built from the specification, the contaminant results and the label. The buyer's regulatory team identifies the route for the destination member state and confirms that the specification matches the material being placed on the market. General food law, labelling and contaminant rules apply alongside any product-specific route; the current consolidated text is the reference, not a summary. ## United States The US file is built around the exact dietary ingredient or food substance and its intended use. The supplier should be able to name the basis it relies on and point to the supporting document; the buyer confirms that the basis covers the finished product and the claim. The label and the claim are reviewed separately from the certificate. ## United Kingdom Great Britain and Northern Ireland are checked separately. The GB file uses the current GB register and GB labelling rules; Northern Ireland follows the EU framework. The buyer's regulatory team confirms which of the two applies to the destination and keeps the evidence with the order. ## Contaminants and limits The contaminant panel is a finished-product calculation, not only a drum result. The table below is the usual starting point for a food-supplement file; the current destination text and the daily dose decide the final limit. Contaminant limits to confirm for the finished product | Parameter | Typical supplement reference | What the file should show | Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method, limit and the finished-product calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception that applies | Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result and method | Arsenic (As) | Customer or market limit | The agreed limit and the method, stated on the certificate ## Claims and label The label names the material, the quantity and the source in the form the destination requires. The claim review is separate: the brand's regulatory reviewer confirms that the wording is allowed for the product, the form and the market. The certificate does not approve a claim, and a claim does not change the specification. For this product, the file starts with the catalog specification and the lot certificate. The buyer adds the destination route, the finished-product dose and the label review; the supplier keeps the source, process and pack under change control. ## Documents the file needs A melatonin file for a supplement brand normally contains the specification with its HPLC assay and identity test, the lot COA, the contaminant panel, the residual-solvent and allergen statements, the source record, and the stability data behind the retest period. If the destination classifies melatonin as a medicine rather than a food, the document set changes and this page cannot settle that question. The melatonin product hub carries the catalogue position; the buyer's regulatory team confirms the route. ## Checklist before the first order - Specification version, CAS and the exact form are named. - COA, TDS, SDS, allergen, GMO, origin and residual-solvent statements are on file. - The contaminant results are converted to the finished-product dose. - The label and the claim have been reviewed for the destination. - The source, process and pack are under change control. - The quotation, the specification and the certificate refer to the same version. The product page carries the catalog specification; the COA page explains the lot certificate; the identity page covers the analytical evidence. The quality page describes the release file, and the regulatory notes provide the framework references. ### 06 How we prove a melatonin lot is melatonin URL: https://nutrition.rainwoodbio.com/products/specialty/melatonin/identity/ Reviewed: 2026-11-19 A melatonin lot is identified by four independent layers: the IR spectrum, the melting range, the HPLC retention and UV response, and the lot record that ties the sample to the certificate. No single layer proves the molecule; together they make substitution and dilution visible. In one lineA melatonin lot is identified when the IR spectrum, the melting range, the HPLC result and the lot record agree; a single assay figure does not identify the molecule. ## Four layers, one conclusion Identity layers · question and evidence | Layer | Question | Evidence | Molecular | Is the structure melatonin? | IR spectrum against a reference standard | Thermal | Does the solid melt as melatonin should? | Melting range 117–120 °C | Chromatographic | Is the main peak melatonin, and what else is present? | HPLC retention, UV spectrum, peak purity, related substances | Record | Is this the lot that was tested? | Lot code, COA, retained sample IR asks whether the functional groups are right; melting whether the solid behaves as it should; HPLC how much main component is present and whether the peak is clean; the record whether sample and certificate describe the same pack. ## The ratio behind the assay Behind every assay figure is a ratio: sample peak area divided by reference-standard peak area, with the standard's purity and sample weight. The ratio is only as good as the standard, the integration and the weighing, and it is blind to anything that does not absorb at the detection wavelength — water, residual solvent, a mineral carrier. Related substances use another ratio: each impurity area as a share of the total. Area percent is not weight percent unless response factors are known, so the specification should say whether limits are area-normalised or corrected. ## The assay is not the identity The catalog assay is 98.5–101.5% by HPLC on the dried basis. A reversed-phase C18 method with UV detection at 220–280 nm separates melatonin from related indoles and compares the peak area with a reference standard. The certificate should name the column, mobile phase, wavelength and integration method. A retention time at one wavelength is a weak identity test. Another indole can elute at the same time, and a diode-array detector can show that the peak's UV spectrum does not match the standard. Peak purity is not proof either, but a purity failure is a strong reason to stop. The assay window permits up to 1.5% non-melatonin material. The number does not say whether that is 5-methoxytryptamine, a residual solvent, a carrier or an unrelated indole. That is the job of the related-substance method, so set individual and total limits, not only an assay window. ## The melting range as a purity check Melatonin melts at 117–120 °C in the catalog specification. A pure crystalline solid melts sharply; an impurity usually depresses the start of the range and broadens it. A lot melting at 114–118 °C fails, and 116–124 °C is a warning even if the midpoint looks acceptable. The method matters: heating rate, capillary calibration and sample preparation all move the observed range by a degree or two. The certificate should name the method, and a second laboratory should use the same one before comparing results. A mixed melting point with a reference standard confirms identity when disputed. Melting is supportive, not specific: a eutectic mixture can give a plausible range. ## The IR fingerprint The catalog identification test is “IR conforms”. Infrared spectroscopy compares the sample's absorption bands with a reference spectrum: the indole N–H, amide carbonyl and ether C–O region are the informative parts. The spectrum can be run on a potassium bromide disc or by attenuated total reflectance; the certificate should say which. IR is a strong structural test and a weak purity test. A sample that is mostly melatonin with a few percent of a related indole can still match the standard at normal scale. Use IR to answer “is this the right molecule”; HPLC and melting answer “how much else is in it”. ## What XRD adds, and what it cannot Melatonin is crystalline, so X-ray diffraction can confirm the phase and distinguish a polymorph or solvate from the expected form. It is supporting evidence, not the release identity: the catalog identification is IR conforms, supported by the melting range and HPLC. XRD sees only crystalline material, so an amorphous carrier or a dissolved impurity is invisible, and it cannot separate melatonin from a crystalline related indole with a similar lattice without a full pattern. A blend with crystalline lactose or mannitol shows their reflections, useful for disclosure but not for proving the active. ## The routes that pass a weak test Adulteration routes and the tests that catch them | Route | What it looks like | What catches it | Related indole | Extra peak, co-elution or a UV spectrum that does not match | HPLC with diode array, related-substance method, LC-MS | 5-methoxytryptamine | The direct precursor, close in structure and UV response | A method that resolves the precursor; individual limit | Dilution | Low assay, a shift in loss on drying or residue on ignition | Mass balance, LOD, residue on ignition, assay | Substitution | IR or melting range does not match the standard | IR against a standard, mixed melting point, HPLC 5-Methoxytryptamine is the precursor in the acetylation route and the related substance to ask about first. Other indoles — tryptamine, 5-methoxytryptophol, 5-hydroxyindole derivatives — can appear through a side reaction, a contaminated starting material or a poor recrystallisation. None is visible on an assay-only certificate. Dilution is the commercial route. A powder cut with a white carrier can pass a loose assay if the specification has no mass-balance check. A shift in residue on ignition, a rise in loss on drying or a low assay calls for the full certificate and the batch record, not only the assay. ## How to write the specification Write the identity block: “Melatonin, CAS 73-31-4, assay 98.5–101.5% by HPLC on the dried basis; identification by IR conforms; melting range 117–120 °C; loss on drying ≤0.5%; residue on ignition ≤0.1%; related substances with individual and total limits; heavy metals Pb ≤3, As ≤2, Cd ≤1, Hg ≤0.1 mg/kg.” The related-substance limits are the buyer's decision. Set them from the route, the destination and the finished product, not from a generic template. If the supplier cannot provide an individual limit for 5-methoxytryptamine, that is a gap in the file, not a detail for the first shipment. ## Five questions for a supplier - Which HPLC method, column, wavelength and integration produced the assay, and can you send the chromatogram? - What is the related-substance profile, with individual and total limits and this lot's result? - Which synthetic route and which residual solvents apply, and what are the results? - Can you send the IR spectrum and melting trace against a named standard? - What is the lot code and retained sample, and do they match the pack? The certificate is broken down on the COA page; the grade and dilution decision is on the grade page; the catalog specification is on the melatonin product page. The chromatographic method is described in the HPLC method note, the infrared method in the FTIR method note, and the lot record in the retained-sample entry. ### 01 What the COA for NMN actually contains URL: https://nutrition.rainwoodbio.com/products/specialty/nmn/coa/ Reviewed: 2026-11-19 The NMN certificate starts with the material itself: appearance, CAS and formula, identification by HPLC and 1H NMR, then purity by HPLC, pH of a 5% solution, Karl Fischer water, particle size, the heavy-metal panel and microbiology; a β-NMN claim also needs the α/β ratio from the NMR. Every line needs a method and a release limit. The limits on this page describe the catalog grade; the lot-specific figures belong on the batch COA. A 98.0% purity figure on its own does not say which anomer or which solid form was tested. In one lineA purity peak is not a specification: the certificate has to show the method, the anomer ratio, the water and the pH that belong to the lot. ## Reading the certificate line by line Every certificate line should stand on its own: what was measured, how, and against which limit. HPLC shows that the main peak matches a reference standard, and 1H NMR shows the structure and the anomer. The two are not interchangeable. Identity, purity and moisture · NMN catalog specification | Parameter | Method | Catalog limit | Appearance | Visual | White to off-white powder | CAS | Registry number | 1094-61-7 | Formula | Molecular formula | C11H15N2O8P | Identification | HPLC retention and UV spectrum | Conforms to the reference standard | Identification | 1H NMR | Conforms to the β-NMN structure | Purity (β-NMN) | HPLC, UV detection | ≥98.0% | pH (5% solution) | Potentiometry | 2.0–4.0 | Water | Karl Fischer | ≤5.0% Particle size, heavy metals and microbiology | Parameter | Method | Catalog limit | Particle size | Sieve analysis | ≥95% through 40 mesh | Heavy metals | ICP-MS | Lead ≤3 · arsenic ≤2 · cadmium ≤1 · mercury ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent ## What the HPLC and NMR results measure The HPLC figure is an area percentage, not a mass balance. The certificate should name the column, the mobile phase, the detection wavelength, whether the method resolves the α and β anomers, and whether the result is by area normalisation or against an external standard. Area normalisation assumes every component has a similar response; water, phosphate salts and residual solvent do not appear, so a 98.0% area result can sit beside 5.0% water. The NMR line is an identity test. A one-dimensional 1H spectrum shows the nicotinamide ring and the ribose anomeric proton; a 31P experiment, where available, shows the phosphate. Neither is a purity assay unless the laboratory runs quantitative NMR. The anomer ratio is read from the anomeric signals. The spectrum should be attached to the certificate, not reduced to the word “conforms”. pH and water are release tests because they describe the solid the customer receives. pH is measured on a 5% solution, so the concentration belongs in the method; a result without it cannot be compared with another laboratory. Karl Fischer is the practical check on drying and pickup during packing. NMN is hygroscopic, so exposure before the test is part of the result. ## Where the limit ends and the result begins One number is the acceptance boundary; the other is what the laboratory found. A certificate should keep them apart and print the method beside each. If the result column merely repeats the specification range, the document has restated the gate rather than reported a lot. What the catalog limit fixes, and what the batch certificate has to add | Line | Catalog limit | What the batch COA must show | Purity | ≥98.0% by HPLC | Lot-specific area %, chromatogram and method | Anomer ratio | Reported; limit agreed in writing | β/α ratio from the NMR spectrum | pH | 2.0–4.0 at 5% | Lot-specific pH at the stated concentration | Water | ≤5.0% by Karl Fischer | Lot-specific water result | Particle size | ≥95% through 40 mesh | Sieve result and mesh used | Heavy metals | Lead ≤3 · arsenic ≤2 · cadmium ≤1 · mercury ≤0.1 mg/kg | Each element, method and quantification limit | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Plate counts and absence results The anomer line is the one most easily left off. If the certificate says “NMR conforms” and nothing else, the buyer cannot tell whether the lot is almost entirely β or a mixture. Ask for the ratio and the spectrum. Water moves the same way: two lots can both pass ≤5.0% and still behave differently in a capsule. ## What moves between NMN lots The anomer ratio is set by the coupling and the crystallisation. Water is set by the drying step and the pack. pH follows the isolation and any residual acid, and particle size follows milling and sieving. Colour can move with drying temperature or a trace metal while HPLC stays inside the limit. Related substances are the other variable. The certificate should report the main related peaks, not only the parent. A method that integrates only the NMN peak can hide a growing nicotinamide riboside or nicotinamide peak. Read three or four consecutive lots, not one: water rising across deliveries or a widening anomer ratio is more useful than a single value near a limit. ## When an outside laboratory earns its place An outside laboratory is worth commissioning when the source is new, the market is regulated, the anomer result is contested, or the certificate does not support the form being sold. The useful panel is not a repeat: HPLC with a photodiode array for peak purity, 1H and 31P NMR for identity and anomer ratio, Karl Fischer for water, a residual solvent screen, ICP-MS for the metal panel, and a plate count for microbiology, on one sample. Ask the laboratory to report its limit of detection and limit of quantification for each method. “Not detected” without a limit is a statement about the method, not about the sample. Ask whether the laboratory is accredited to ISO/IEC 17025 for the specific test. ## Six lines for a supplier comparison Six lines to put side by side before two quotations are read as equivalent | Line | What to compare | Why it changes the answer | Form | Free acid or salt; anhydrous or hydrate | Changes the mass basis and the label | Anomer | β/α ratio by NMR, with the spectrum | HPLC purity can hide the α form | HPLC method | Column, wavelength, standard, integration | Area % is method-dependent | Water and pH | Karl Fischer result; pH at 5% | Both are release tests, not footnotes | Related substances | Nicotinamide riboside, nicotinamide, unspecified peaks, residual solvents | A single peak is not a purity profile | Regulatory statement | Market and use named, dated | A COA is not an authorisation The catalog specification is on the NMN product page. The tests that separate β-NMN from its analogs are on the identity page; presentation choices are on the grade page; the comparison with nicotinamide riboside is on the NMN versus NR page. The lot-release process is set out on the quality page, and the published specifications sit in the specification index. ### 02 NMN purity and salt form: choosing a grade URL: https://nutrition.rainwoodbio.com/products/specialty/nmn/grades/ Reviewed: 2026-11-19 The catalog grade is β-NMN free acid at ≥98.0% by HPLC, 40 mesh, with water ≤5.0% and pH 2.0–4.0 in 5% solution. The choices that actually change are the assay basis, the anomer control, the water limit, the particle size and the presentation — powder, granulated or diluted. A higher percentage on a quotation does not make a grade fit the dosage form or the label. In one lineA grade is a form, a moisture level and an anomer ratio, not a single HPLC number; the label and the dosage form decide which combination fits. ## Why a grade is more than a percentage A grade is a combination of form, assay basis and physical presentation, not a single number. “98%” can mean 98.0% by HPLC area, 98.0% by mass against a standard, or 98.0% of a diluted blend. “β-NMN” is an identity claim about the anomer, not a synonym for NMN. “Free acid” says there is no sodium or potassium counter-ion. “Anhydrous” says the material is not a hydrate. Two quotations that agree on 98% can disagree on all four. NMN is usually supplied as the free acid, which behaves as a zwitterion: the pyridinium ring carries a positive charge and the phosphate a negative one. The catalog material is that free acid, not a salt. If a supplier offers a sodium salt, the mass basis changes and the label has to say so. The same arithmetic applies to a hydrate: water adds mass without adding NMN, so the assay per gram falls. ## The presentations side by side NMN presentations · what changes when the powder is granulated or diluted | Presentation | What it is | What changes | Fits | 40 mesh powder | β-NMN free acid, ≥98.0% by HPLC | Baseline flow, dust and solubility | Capsules, sticks, dry blends | Granulated | Powder built into larger particles | Flow, dust and dispersion; the granulation aid must be declared | Tablets, high-speed filling | Diluted | NMN on a named carrier | Content per gram, homogeneity and label | Low-dose capsules, premixes The table is about presentation, not a hierarchy. A granulated grade is not more pure than the powder; it is easier to run on a tablet press. A diluted grade is not a lower grade; it is a different material with a carrier, and the carrier has to be named on the specification and the label. ## What changes in the powder Particle size is a release line: ≥95% through 40 mesh, which is about 425 µm. That is coarse enough to flow and fine enough to disperse. Granulation changes the size distribution and usually lowers dust; it can also change dispersion and dissolution, so the tablet or capsule process has to be rechecked rather than assumed. Water is the physical line that matters most. NMN is hygroscopic, and a powder near the top of the water limit has less headroom in a humid dose room. The certificate should state whether the material is the anhydrous free acid or a hydrate; the water result is the practical check. pH 2.0–4.0 is a solution property; it does not describe the dry powder. A granulated or diluted grade can have a different pH if the process adds an acidic or alkaline component. ## What changes in the dosage form Dosage form and the grade to start with | Dosage form | Grade to start with | Why | Capsules | 40 mesh powder or granulate | Flow and fill-weight control | Tablets | Granulated | Flow, compaction and low dust | Powder sticks | 40 mesh powder or granulate | Dispersion and low water | Drink mixes | 40 mesh powder | Solubility; the 5% solution is acidic The dosage form also sets the water limit and the metal panel. A stick pack has a small headspace and a single serving; a 25 kg drum is opened repeatedly. The same grade can be right for both, but the pack and the opening cycle are part of the choice. The label follows the grade. If the label says β-NMN 98%, a diluted grade does not support that line without recalculating the content. If the label says “NMN” and the specification says β-NMN, the label is less specific than the file; that is a decision for the brand, not a default. ## What the specification has to pin down Catalog lines and the lines that change with the grade | Line | Catalog specification | If the grade changes | Identity | β-NMN by HPLC and 1H NMR | Same identity, new spectrum | Purity | ≥98.0% by HPLC | State area % or mass basis | Anomer | β/α ratio by NMR, reported | Agree a limit and a method | Water | ≤5.0% by Karl Fischer | Tighter for stick packs | pH | 2.0–4.0 at 5% | Re-test if the process adds acid or alkali | Particle size | ≥95% through 40 mesh | New sieve result for a granulate | Presentation | Powder | Granulate or dilution named An order that names only “NMN 98%” still leaves the anomer, the water and the presentation unresolved. The line that matters for a β claim is the anomer ratio. The line that matters for a diluted grade is the carrier and the content per gram. ## When a grade change is the wrong move Do not change to a diluted grade while the label says 98% β-NMN; the label needs a new content calculation and a new ingredient declaration. Do not change to a granulated grade without naming the granulation aid and checking the tablet or capsule process. Do not switch from the free acid to a salt without re-basing the assay and the label. And no grade change replaces the regulatory file: the specification and the route are separate. The catalog specification is on the NMN product page. The certificate lines are explained on the COA page; the storage limits are on the stability page; the comparison with the other nicotinamide nucleoside is on the NMN versus NR page. The lot-release process is set out on the quality page, and the published specifications are in the specification index. ### 02.1 NMN vs nicotinamide riboside: form, purity and the label URL: https://nutrition.rainwoodbio.com/products/specialty/nmn/grades/nmn-vs-nr/ Reviewed: 2026-11-19 NMN and nicotinamide riboside are different molecules: NMN carries a 5'-phosphate that NR does not. That phosphate changes the molecular weight, the salt form, the assay basis, the stability questions and the regulatory file. They are not interchangeable on a label or in a specification. In one lineNMN and NR are one phosphate apart, and that phosphate changes the assay basis, the stability risks and the regulatory file. ## Two molecules, one phosphate apart NMN and nicotinamide riboside · the structural facts that change the file | Property | NMN | Nicotinamide riboside | Chemical name | β-nicotinamide mononucleotide | Nicotinamide riboside | Formula | C11H15N2O8P | C11H14N2O5 | Molecular weight | 334.22 | 254.24 | Phosphate | 5'-phosphate present | None | Usual supplied form | Free acid, zwitterionic | Chloride salt NMN is the 5'-phosphorylated nucleoside; NR is the same nucleoside without the phosphate. The extra phosphate adds about 80 g/mol and makes NMN an acid. NMN is normally supplied as the free acid, which behaves as a zwitterion. NR is commonly supplied as the chloride salt. Those are different mass bases, not different names for the same powder. ## What 98% means for each Both ingredients are sold on a percentage, but the percentage is not the same measurement. An HPLC area percentage describes the share of the chromatographic peak area, not the mass of the named molecule in the drum. For NMN, the free acid has no counter-ion, so water and the α anomer are the main non-β components. For NR chloride, the chloride is part of the salt: about 87% of the salt's mass is NR, so a 98% HPLC figure is not 98% NR by mass. The specification has to state the form and the basis. A certificate for NR chloride cannot be read as a certificate for NMN, and a certificate for NMN cannot be read as a certificate for NR. The two also have different related substances: NMN can hydrolyse to NR, so an NR peak in an NMN lot is a degradation or impurity signal, not a substitute ingredient. A buyer comparing quotations should compare the form, the assay basis, the water and the anomer or salt content. The highest percentage is not the most informative line. ## Stability questions are not the same Both are water-soluble and hygroscopic, so the pack matters for both. NMN adds an ionisable phosphate and a 5% solution at pH 2.0–4.0. That acidity is a formulation fact: it can shift a low-buffer blend, and it sits beside hydrolysis and anomerisation as the first stability questions. NR chloride brings its own salt and water uptake. The counter-ion, the water content and the pack have to be tested for the NR grade, not inferred from NMN data. A stability protocol for one molecule does not transfer to the other, even though the two are structurally close. Compare stability data on the same basis: same pack, same temperature, same test points, same analytical method. A statement that one is more stable than the other needs that comparison; this page does not make it. ## The regulatory files are separate In the EU, the novel-food file for nicotinamide riboside chloride is separate from the file for NMN. Check the current entry for the form you buy, including its conditions of use and maximum daily amount. In the US, the NMN position was revisited in 2025: the FDA's 2022 exclusion was reconsidered, and the agency stated that NMN is not excluded, reopening the NDI pathway. The US file for NR is separate and has to be checked on its own. A notification or a conclusion for one substance does not cover the other. The UK register is separate again. The practical rule is simple: clear the molecule, the form and the market before the label is drafted. A supplier's statement about “NMN/NR” as a category is not a market-specific permission. ## Naming the form on the label The label must name the form. “NMN” alone does not say β; “NR” alone does not say chloride. The ingredient declaration, the assay basis and the net content have to match the specification. If the label says β-NMN and the drum contains a diluted or salt form, the label is wrong even if the HPLC number is high. The two names are not synonyms on a label. A blend of NMN and NR is a third material, not a way to average the two. The label also has to carry the market's supplement particulars, the storage statement and the claim boundary; those are separate from the ingredient name. Keep the COA, the specification and the artwork on the same form. A label change from NMN to NR is a new regulatory file, a new specification and a new stability pack, not a rename. ## When to choose which Four questions that decide between NMN and NR before a quotation | Question | NMN | Nicotinamide riboside | Which form is named? | β-NMN, free acid | Nicotinamide riboside chloride | Which assay basis? | HPLC area; water and anomer | HPLC area; chloride salt | Which market file? | EU file: separate NR chloride entry; NMN checked separately | EU file: NR chloride entry; check US and UK | Which pack? | Hygroscopic, acidic powder | Hygroscopic salt Choose NMN when the destination market permits it, the label and specification call for β-NMN, and the analytical method can control the anomer. Choose NR when the market permits the NR form, the label calls for nicotinamide riboside chloride, and the salt basis is acceptable for the dose and the pack. Choose neither on a claim. This page compares forms and files only. The decision belongs to the market permission, the label, the analytical control and the dosage form. If the market does not permit NMN, an NR file does not transfer. If the label says β-NMN, an NR blend is a different product. The grade choices are on the NMN grade page; the regulatory position is on the compliance page; the identity tests are on the identity page. The catalog specification is on the NMN product page, and the lot-release process is set out on the quality page. ### 03 NMN is hygroscopic and pH-sensitive; the pack decides the shelf life URL: https://nutrition.rainwoodbio.com/products/specialty/nmn/stability/ Reviewed: 2026-11-19 NMN is hygroscopic and its 5% solution is acidic, at pH 2.0–4.0. The dry powder keeps when the pack excludes water; in solution, hydrolysis and anomerisation set the clock. A shelf life is a property of the pack and the storage condition, not of the drum label alone. In one lineThe powder keeps only as dry as the pack keeps it; water, acid and heat set the shelf life, not the drum label. ## The powder and the pack The catalog water limit is ≤5.0% by Karl Fischer. That is a release gate, not a storage target. A powder near the water limit has little headroom; in a humid dose room it can move past the limit before the capsule is filled. Store the sealed pack in a cool, dry place, away from direct light, and keep the pack closed between weighing and sealing. Where a desiccant is fitted, it belongs in the pouch, not in a bin beside it. NMN is freely soluble in water, so a damp powder can cake and the water result can climb without any visible change. The pack is part of the specification: a 1 kg foil pouch and a 25 kg fiber drum have different headspace, different opening cycles and different moisture ingress paths. ## After the powder dissolves Once dissolved, NMN has two hydrolysis routes. The phosphate can be removed to give nicotinamide riboside, and the glycosidic bond can split to give nicotinamide. The α and β anomers can also equilibrate in solution. Acid, heat and time push all three. The pH 2.0–4.0 release window describes the lot at release; it is not a stability target. A drink mix is a solution in the making. A dry blend has a low water activity and a long hold; a mixed drink has a short one. The formulation should specify the water activity of the dry mix, the pH after dispersion, and the maximum hold time before filling or drinking. A powder stick is the lower-water format, but its headspace and seal still decide the shelf life. ## What makes NMN fail Stability factors for NMN powder and for a dissolved mix | Factor | What it changes | Control | Water | Hydrolysis, caking and the Karl Fischer result | Sealed pack, desiccant where fitted, low room humidity | pH | Hydrolysis and anomerisation rate | Measure the 5% solution and the dispersion, not only the powder | Heat | Reaction rate and colour | Cool store; limit process temperature and hold time | Light | Colour and degradation | Opaque pack; keep away from direct light | Time in solution | Hydrolysis and the α/β balance | Set a maximum hold time and test at the end of it The weight of these factors depends on the pack and the formula. A sealed powder at 25°C/60% relative humidity is a different system from a drink mix at 40°C. The protocol has to test the system that will be sold, not the powder in a glass jar. ## A stability protocol for the pack Run the protocol in the final pack. A workable design follows ICH Q1A(R2): long-term at 25°C/60% relative humidity, intermediate at 30°C/65%, and accelerated at 40°C/75%, with test points at 0, 3, 6, 9 and 12 months for long-term and 0, 1, 2, 3 and 6 months for accelerated. For a food ingredient this is a design model, not a regulatory claim; the destination market may ask for a different set. At each point test appearance, purity by HPLC, the α/β ratio by NMR, water by Karl Fischer, pH of a 5% solution, microbiology and pack integrity. Add a note on caking and a photograph of the opened pack. The anomer and water results can move before the HPLC purity does, so a protocol that tests only purity can miss the failure. Run at least three lots. If the customer will open a drum over weeks, add an opened-and-resealed arm on a defined schedule. That arm is where dose-room behaviour shows, and it is an arm often left out of a supplier data pack. ## What the formula adds The formula adds water and pH. Hygroscopic excipients, alkaline salts and any water-based granulation or coating step shorten the window. An acidic NMN powder can also shift the pH of a low-buffer blend, so measure the pH of the dispersion, not only the powder. Check the process temperature and the time the powder spends in the blender. A short, dry blend is easier on the material than a wet granulation. If the formula needs a liquid step, ask for compatibility data on the finished blend, not only on the raw material. The finished product's shelf life is not the ingredient's shelf life. The brand owns the finished-product study; the supplier's data supports it. ## From data to a shelf life Assign the shelf life per pack format from the protocol. The catalog page does not promise a fixed number of months, because the number depends on the pack, the storage condition and the market's rules. A 1 kg foil pouch, a 25 kg drum and a stick pack are three different packages. After opening, the clock restarts. A drum opened daily in a humid room is not the same package that was tested sealed. Write the opening and resealing instruction, the desiccant replacement where fitted, and the maximum time out of the pack. Do not extend a shelf life on a purity result alone; water and pH can fail first. Keep the stability data with the lot and the pack code. If the pack changes, the data does not transfer automatically. The catalog specification is on the NMN product page. The certificate lines are on the COA page; the presentation choices are on the grade page. The release and sampling process is set out on the quality page, and the published specifications are in the specification index. ### 04 NMN: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/specialty/nmn/moq/ Reviewed: 2026-11-19 Orders start at one foil pouch of 1 kg, filled from a released lot and sent with that lot's certificate. The production pack is the 25 kg fiber drum; the pouch is the size used to qualify the material. In one lineOne kilogram is enough to qualify the material, but no quantity is quoted until the destination and the use are cleared in writing. ## The 1 kg qualification unit One kilogram is a practical unit, not a marketing threshold. It is enough to run a pilot batch, complete an identity test on receipt, and keep a retained sample. It is also small enough to be drawn, labelled, packed and traced as one lot, so the COA and the material on the bench refer to the same pack. The minimum does not change with the size of the company. It changes with the grade: a standard 40 mesh powder can be drawn from a released lot, while a granulated or diluted grade may be made to order and scheduled separately. Ask for the MOQ in the same message as the grade and the pack. ## The pack and its label Standard NMN packs and what each one protects | Pack | Net content | Use | What it protects | Foil pouch | 1 kg | Sample, pilot, small order | Moisture barrier for a small pack | Fiber drum | 25 kg | Commercial production | Strength and stacking for bulk | Lot label | Both packs | Traceability | Lot code, CAS, net weight and storage | Desiccant, where fitted | Both packs | Humidity control | Water uptake in storage and transit NMN is hygroscopic, so the pack is not a logistics detail. The pouch and the drum have different headspace and different opening cycles. A drum opened daily in a humid room is a different package from the one that was sealed and tested. ## From order to dispatch The catalog lead time is 1–7 days for a standard grade in the standard pack, counted from a complete order and a complete document set. A granulated or diluted grade is scheduled separately, and so is a market-specific document set. The lead time is dispatch, not transit; the quotation states the Incoterm and the named place. The clock starts when the specification and the quantity are agreed. An enquiry that arrives before those two are settled cannot be scheduled. If the lot is held for a third-party test, that test time belongs in the schedule. If the order is urgent, say which document is on the critical path, because a test or a statement can set the date more than production does.The buyer supplies the destination and the intended use for the shipping documents. ## What a quotation must state A quotation is a controlled document, not a chat reply. It should name the product as β-nicotinamide mononucleotide, the grade and the specification version, the assay basis and the anomer limit, the pack and net content, the quantity and the dispatch window. It should state the Incoterm and the named place, the document set that travels with the lot, and the destination and intended use it was written for, because the regulatory condition is part of the offer. It should also state its validity date and the payment terms agreed in the order. Anything left open is a term to settle before the purchase order, not a note to fix after dispatch. ## Samples and retained lots The 1 kg pouch doubles as the sample pack: it is drawn from a released lot and the certificate follows it. A sample is not a different specification: test it against the same lines you will put in the purchase order. Keep part of it as your retained sample, and ask the supplier to keep its own. Keep the sample label, the COA and the retained sample together; a sample without the lot code cannot be compared with a later delivery. If the sample is a made-to-order grade, the production lead time applies. If the destination is not cleared, the sample itself is a regulatory question; resolve that before dispatch, not after the courier label is printed. Put the sample through the tests you will rely on: identity by HPLC and NMR, water, pH and the metal panel. A sample that is only weighed and photographed has not been qualified. ## Terms and the regulatory condition The quotation states the Incoterm and the named place, the pack, the documents, the lead time and the validity. Payment terms are agreed in the order, not assumed from the quotation. The COA, the specification and the regulatory statement are part of the terms. A change to the grade, the pack or the destination is a new quotation, not a note on the old one. Keep the quotation and the clearance letter together; the order should reference both. Pack and MOQ definitions are in the MOQ glossary entry. The regulatory condition is set out on the compliance page; the certificate lines are on the COA page. The catalog specification is on the NMN product page, and the lot-release process is set out on the quality page. ### 05 The regulatory file for NMN URL: https://nutrition.rainwoodbio.com/products/specialty/nmn/compliance/ Reviewed: 2026-11-19 NMN is supplied as β-nicotinamide mononucleotide powder, CAS 1094-61-7. The catalog specification is the starting point; the regulatory file is built around the exact material, the destination and the finished-product route. The buyer's regulatory team confirms that route. This page lists the documents and checks that belong in the file, so the specification and the commercial pack can be reviewed together. In one lineThe specification describes the material; the regulatory file shows the route, the limits and the label for the destination. ## What the file contains Four documents hold the NMN file together. One fixes the specification version for β-nicotinamide mononucleotide. One reports the released lot. One states the destination limits and the label text. One records every source, process and pack change. Certificate, technical data sheet and safety data sheet cover the first three in part; none of them decides the route, and because the regulatory position has changed, the route is dated and re-checked rather than inherited. The file should also contain the allergen and GMO statements, the origin record, the residual-solvent statement and any customer-specific declaration. Where a statement is not available for the lot, the gap should be named before the order, not discovered at the port. A document list with version numbers is more useful than a folder of undated PDFs. ## European Union The EU file is built from the specification, the contaminant results and the label. The buyer's regulatory team identifies the route for the destination member state and confirms that the specification matches the material being placed on the market. General food law, labelling and contaminant rules apply alongside any product-specific route; the current consolidated text is the reference, not a summary. ## United States The US file is built around the exact dietary ingredient or food substance and its intended use. The supplier should be able to name the basis it relies on and point to the supporting document; the buyer confirms that the basis covers the finished product and the claim. The label and the claim are reviewed separately from the certificate. ## United Kingdom Great Britain and Northern Ireland do not share one file. GB applies the current register and labelling requirements; Northern Ireland follows the EU framework, where NMN has no novel-food authorisation as of this review. The delivery address settles which regime applies, and the evidence is filed with the order before the label is finalised. ## Contaminants and limits The contaminant panel is a finished-product calculation, not only a drum result. The table below is the usual starting point for a food-supplement file; the current destination text and the daily dose decide the final limit. Contaminant limits to confirm for the finished product | Parameter | Typical supplement reference | What the file should show | Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method, limit and the finished-product calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception that applies | Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result and method | Arsenic (As) | Customer or market limit | The agreed limit and the method, stated on the certificate ## Label and claims The label names the material, the quantity and the source in the form the destination requires. The claim review is separate: the brand's regulatory reviewer confirms that the wording is allowed for the product, the form and the market. The certificate does not approve a claim, and a claim does not change the specification. ## Claims for NMN NMN has no EU novel-food authorisation as of this review, so a claim cannot make the ingredient lawful there; the status is checked before the wording. In the US, the 2022 exclusion was reconsidered in 2025 and the FDA stated that NMN is not excluded, reopening the NDI pathway, but the current position still governs the file. No disease claim is open in either market. A structure/function statement needs substantiation and the DSHEA disclaimer, and a claim written for nicotinamide riboside does not transfer to NMN. This site publishes the specification and makes no health claim. ## Documents for the NMN file The lot file needs the COA with HPLC purity, 1H NMR identity, the α/β anomer ratio, pH, Karl Fischer water, the metal panel, the micro count and the residual-solvent profile. The specification must name β-NMN, the assay basis and the anomer limit, because a 98% peak alone does not prove the form. Add the TDS, the SDS, allergen and GMO statements, the origin record and the stability summary for the pack. For the EU, attach the current novel-food status; for the US, the NDI basis and the current agency position. The NMN product page carries the catalogue specification. For this product, the file starts with the catalog specification and the lot certificate. The buyer adds the destination route, the finished-product dose and the label review; the supplier keeps the source, process and pack under change control. ## Checklist before the first order - Specification version, CAS and the exact form are named. - COA, TDS, SDS, allergen, GMO, origin and residual-solvent statements are on file. - The contaminant results are converted to the finished-product dose. - The label and the claim have been reviewed for the destination. - The source, process and pack are under change control. - The quotation, the specification and the certificate refer to the same version. The product page carries the catalog specification; the COA page explains the lot certificate; the identity page covers the analytical evidence. The quality page describes the release file, and the regulatory notes provide the framework references. ### 06 How we prove an NMN lot is β-NMN URL: https://nutrition.rainwoodbio.com/products/specialty/nmn/identity/ Reviewed: 2026-11-19 β-NMN is an anomer plus a phosphate, so the identity file has to establish both. HPLC with a standard shows that the main peak is NMN; 1H NMR shows the ribose anomer and the phosphate environment. A purity percentage on its own cannot separate those questions, and a certificate that says only “NMR conforms” leaves the anomer open. In one lineβ-NMN is proved by the anomer and the phosphate together; a 98% HPLC peak can belong to the wrong anomer or the wrong nucleotide. ## Four checks, one file The identity file for an NMN lot, check by check | Layer | Evidence | What it closes | Document | Lot code, COA, specification and chain of custody | Which material was tested | Chromatography | Retention time, UV spectrum and a spike with a standard | The main peak is NMN, not a co-eluting analog | NMR | 1H spectrum; 31P where available; anomer integrals | Structure, phosphate and the α/β ratio | Concordance | Appearance, pH, water and solubility | The solid matches the rest of the file The four checks answer different questions, so a single result can satisfy one and leave the rest untouched. A retention time can match while the anomer is wrong. An NMR spectrum can match the structure while the lot carries several percent water. The file is the combination. pH and water are the concordance layer. A 5% solution at pH 2.0–4.0 and water ≤5.0% match the catalog solid. A pH outside the range or a high water result does not identify a different nucleotide, but it does say the lot is not the solid the file describes. ## The α/β ratio NMN has an anomeric centre, and the β anomer is the form named in the specification. The α anomer has the same mass and a similar UV spectrum; on a column that does not resolve the two, it can sit inside the main peak. NMR can read the anomeric proton integrals, so it is the method that answers the α/β question. Sample preparation matters. The anomers can equilibrate in solution, so a spectrum run after a long hold can show a different ratio from the solid. The laboratory should state the solvent, the temperature and the time between dissolution and acquisition. A ratio without those details is not comparable between laboratories. The specification should state the ratio and the method. An α limit is agreed case by case; it is not implied by the word “β”. If the certificate says “β-NMN” and reports no ratio, the buyer has a name, not a measurement. ## What XRD adds, and what it does not X-ray diffraction is a fingerprint of the crystalline solid. A pattern that matches a β-NMN reference supports the identity of the solid form, and extra crystalline peaks can flag a crystalline diluent. It is a useful support test because it looks at the packed solid, not a solution. It stops at three places. Routine XRD does not quantify the α/β ratio, because it identifies a crystalline phase rather than the anomer content of a mixture. It is blind to amorphous material, so a negative finding is not a purity result. And it does not replace Karl Fischer for water. For NMN, NMR is the anomer method and Karl Fischer is the water method; XRD is the solid-form check. XRD alone is not the proof of β-NMN. Ask for the NMR spectrum and the ratio. ## How NMN can be substituted Routes that can pass a single purity figure, and the test that catches each | Adulterant or route | What it does | What catches it | Nicotinamide riboside | Lacks the phosphate and is smaller | HPLC retention; 31P NMR or a phosphate assay | Nicotinamide adenine dinucleotide | Adds a second nucleotide unit | HPLC gradient; NMR signals | Nicotinamide | Hydrolysis product, small and early eluting | HPLC related substances; a spiked sample | α-NMN | Same mass, wrong anomer | NMR anomer integrals | Dilution | Water, maltodextrin or a phosphate salt | Karl Fischer, mass balance, phosphate The dilution route is the one a purity figure hides most effectively. HPLC area normalisation sees only the peaks that absorb at the detection wavelength. Water, a salt or a non-UV carrier can be invisible, so a 98.0% area result can sit on a lot with a much lower NMN content per gram. The certificate needs water, a mass balance or an assay against a standard, and a statement of what else is in the drum. An adulterant that co-elutes is harder. A method that does not resolve nicotinamide riboside from NMN will report one peak as NMN. Ask for the chromatogram, the resolution from the nearest related peak, and a spiked sample. The same principle applies to the dinucleotide: a gradient that runs long enough to see it is part of the method. ## The lines that make β testable Identity and release lines for a β-NMN specification | Line | Method | Limit or requirement | Identity | HPLC retention and UV; 1H NMR | Conforms to the β-NMN standard | Purity | HPLC | ≥98.0% area | Anomer ratio | 1H NMR | β/α reported; limit agreed | Water | Karl Fischer | ≤5.0% | pH | Potentiometry, 5% solution | 2.0–4.0 | Heavy metals | ICP-MS | Lead ≤3 · arsenic ≤2 · cadmium ≤1 · mercury ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh The order of the lines matters less than the method column. An identity line without a method is a name. A purity line without a basis is a number. The anomer line is the one that makes the β claim testable. ## Five questions that close the file - What is the β/α ratio by 1H NMR on this lot, and can you send the spectrum with the integrals? - What is the HPLC method — column, mobile phase, wavelength, standard and integration — and does it resolve nicotinamide riboside and nicotinamide? - What are the water by Karl Fischer and the pH of a 5% solution on this lot? - What are the phosphate, related-substance and residual-solvent profiles, and is the material the free acid or a salt? - Does the COA belong to the drum being shipped, and can you supply a retained sample and an independent identity report? Five clear answers amount to an identity file. A single purity percentage does not. The certificate lines are on the COA page; the presentation choices are on the grade page; the comparison with nicotinamide riboside is on the NMN versus NR page. The catalog specification is on the NMN product page, the lot-release process is set out on the quality page, and the published specifications are in the specification index. ### 01 What the COA for PQQ disodium actually contains URL: https://nutrition.rainwoodbio.com/products/specialty/pqq/coa/ Reviewed: 2026-11-19 The certificate for a PQQ disodium lot reports appearance, identification by HPLC and UV, assay by HPLC on the anhydrous basis, loss on drying, the heavy-metal panel, microbiology and particle size. Each line should carry the method and the release limit, and the measured result belongs in its own column. The release limits in the first table are the catalog specification; the batch COA is the document that confirms a particular pack. In one lineThe assay is only meaningful with its basis: a PQQ figure on the anhydrous basis, the loss on drying beside it, and an HPLC/UV identity that shows the disodium salt. ## The certificate as a test report A certificate is useful when it can be audited line by line. For each parameter the reader needs three things: what was measured, which method produced the number, and which limit the lot was released against. A row that says only “conforms” asks the reader to trust a conclusion without the evidence behind it. The identity row is the one that decides whether the material is the disodium salt. The assay row decides how much of it is present. Identity, assay, moisture and contaminants · PQQ disodium | Parameter | Method | Release limit | Appearance | Visual | Reddish-brown to dark red powder | Identification | HPLC retention and UV spectrum | Conforms to the reference | Assay (anhydrous basis) | HPLC with UV detection | 98.0–102.0% | Loss on drying | Gravimetric | ≤5.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh ## Anhydrous basis, moisture and the HPLC/UV identity The assay is reported on the anhydrous basis. The laboratory measures the powder as received and divides by the dry matter. A lot that reads 96.0% as-is with 3.0% loss on drying calculates to 98.97% anhydrous. The arithmetic matters because 98.0% as-is and 98.0% anhydrous describe different powders. The certificate should state the basis in the assay row, not in a footnote. It should also report the loss on drying as a measured figure beside it. A result close to the 5.0% limit leaves less room for moisture pickup in a humid warehouse. HPLC with UV detection supplies both the assay and the identity. PQQ absorbs in the ultraviolet, and the spectrum is read at defined wavelengths; the EU novel-food specification for the disodium salt fixes absorbance ratios at 233, 259 and 322 nm (A322/A259 0.56 ± 0.03; A233/A259 0.90 ± 0.09). The catalog here requires “HPLC and UV conform” rather than numeric ratios, so the certificate may report conformity. If the form is disputed, ask for the chromatogram and the spectrum, not only the percentage. The EU specification also sets purity at ≥99.0% on a dry-weight basis and moisture at ≤12.0%, which is a different gate from the catalog range on this page. A lot can meet the catalog and still fail the EU entry. ## Release limit versus batch result The release limit is the acceptance boundary for the lot. The batch result is what the laboratory measured on that lot. Both belong on the page, in separate columns, with the method next to them. A result column filled with the specification range is not a result; it is a copy of the gate. What the result column should contain | Parameter | Release limit | Result column | Assay | 98.0–102.0% anhydrous | A measured percentage, with the basis and the method | Loss on drying | ≤5.0% | A measured percentage | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot | Particle size | ≥95% through 40 mesh | The measured percentage through the sieve “Passes specification” is a conclusion. The reader should be able to reach it from the numbers on the page. For microbiology the evidence is a count plus an absence statement; for heavy metals it is a figure per element, not a single total. A certificate that reports a sum of heavy metals has hidden the element that matters. ## What moves between batches Fermentation and crystallisation move the colour, the assay and the moisture. Drying moves the loss on drying. Milling and sieving move the particle-size result. The 40 mesh figure is a finishing specification, so it can change when the mill or the sieve changes without any change in the chemistry. Colour is the least quantitative line and often the most revealing. Reddish-brown to dark red is a wide window; a shift within it is not an identity failure. A batch that is noticeably darker or duller can point to a different drying step, a longer hold or an oxidation product while the assay still passes. Ask for the batch record rather than rejecting on colour alone. A trend across lots says more than one result near an edge: assay drifting low, loss on drying climbing, or a new peak in the chromatogram. The lot code on the certificate should match the pouch, the drum and the retained sample. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a form claim the supplier's certificate does not prove, or a disputed result. The useful panel is not a full repeat of the certificate. It is HPLC with UV spectrum for identity and assay, loss on drying, ICP-MS for the heavy-metal panel, microbiology, and sodium by ICP-OES to confirm the disodium salt. Add residual ethanol if the EU specification applies, and NMR or high-resolution mass spectrometry if an unknown quinone is suspected. Ask the laboratory to report its detection limit for each screen. A “not detected” line without a limit is evidence about the method's sensitivity, not about the sample. Chain of custody matters. The sample tested should be the sample retained, and the report should identify the lot. When a result is contested, give the referee the retained sample, the supplier's certificate and the specification, and ask for the tests that separate the forms rather than a repeat of the same assay. ## What to compare between suppliers Put six lines side by side: form and CAS number; assay result and basis; HPLC/UV identity with the ratios; loss on drying; heavy metals and microbiology; pack size and lot code. Two quotations that agree on assay but differ on form or basis are not describing the same powder. The second layer is traceability. The certificate should say who manufactured the lot, which process and strain were used, and which drying and milling steps were applied. The catalog specification sits on the PQQ product page. The tests that separate the salt from the free acid are on the identity page; the market conditions are on the compliance page; the HPLC method is described in the HPLC method note; the release workflow is on the quality page. ### 02 PQQ disodium or free acid: choosing a salt form URL: https://nutrition.rainwoodbio.com/products/specialty/pqq/grades/ Reviewed: 2026-11-19 PQQ is supplied as the disodium salt or as the free acid. The two have different CAS numbers, different molecular weights and different label names; the disodium salt carries about 12.3% sodium by mass, so a 98.0% disodium assay is roughly 86.5% free-acid equivalent. The choice changes solubility, the mass per serving and the regulatory citation, not only the word on the certificate. In one lineThe salt form is a specification decision: it changes the CAS number, the sodium content, the water solubility and the label name before it changes anything else. ## Why PQQ comes in two forms PQQ is a tricarboxylic acid. In the disodium salt, two of those acid protons are replaced by sodium ions; the free acid carries the protons instead. The disodium salt is the commercial supplement form because it dissolves more readily in water and is the form named in the main regulatory files. The free acid is the parent molecule, used as a reference standard and in systems where the sodium is not wanted. The difference is not a coating or a dilution. It is a different chemical entity with its own CAS number, molecular weight and certificate. A purchase order that names “PQQ” without the form has not specified either one. ## The two forms side by side PQQ disodium salt and PQQ free acid | Property | Disodium salt | Free acid | CAS number | 122628-50-6 | 72909-34-3 | Formula | C14H4N2Na2O8 | C14H6N2O8 | Molecular weight | 374.17 | 330.21 | Sodium content | About 12.3% by mass | None | Water solubility | Soluble; reddish-brown solution | Sparingly soluble | Typical supplement use | The commercial salt form | The parent molecule; not a drop-in | Label name | Pyrroloquinoline quinone disodium salt | Pyrroloquinoline quinone | EU novel-food entry | The authorised form | Not the form named in the entry The last row is the one that decides markets. The EU authorisation and the US dietary-ingredient route are written around the disodium salt, not around “PQQ” as a generic name, and the GB register has to be checked on its own terms. A free-acid certificate does not inherit that paperwork. ## Solubility, solution colour and handling The disodium salt dissolves in water and gives a reddish-brown solution. That colour is a useful visual check but not an identity test: the free acid and a diluted salt can both be reddish-brown. Solubility is not unlimited, and a concentrated stock may need pH adjustment, warming or sonication. The solution is light-sensitive, so a clear bottle on a bench is the wrong container for a hold. The free acid is much less soluble in water. It is handled in organic solvent, as a fine suspension, or as a reference stock, and it is not interchangeable with the salt in an aqueous formula. Its solution pH is different, which changes both the appearance and the stability of the mix. Both forms are solids that need protection from moisture, and both need protection from light. The disodium salt is specified here at loss on drying ≤5.0% and ≥95% through 40 mesh. The free acid has its own particle-size and moisture profile; a specification written for one form does not transfer to the other. ## Dose arithmetic and the label The conversion factor between the two forms is the ratio of molecular weights: 330.21 ÷ 374.17 = 0.8825. A label that declares 20 mg of PQQ as free acid needs 20 ÷ 0.8825 = 22.66 mg of the disodium salt. A label that declares 20 mg of PQQ disodium salt delivers 17.65 mg of free-acid equivalent. Neither number is a recommendation; they are the arithmetic that keeps the label and the weigh-up consistent. The EU novel-food entry sets a maximum of 20 mg/day of PQQ disodium salt for food supplements, for adults excluding pregnant and lactating women. That is a regulatory ceiling, not a suggested intake. If a formula is built on the free acid but the market file covers the disodium salt, the label and the regulatory citation no longer match. State the basis of the assay as well as the form. A 99.0% disodium assay on the anhydrous basis is not 99.0% of the powder as weighed, and it is not 99.0% free acid. The certificate, the specification and the label should use the same form, the same basis and the same conversion. The dosage form follows the same logic. A capsule or tablet takes the solid salt at 40 mesh and a fill weight sized on the disodium mass. A stick pack or drink mix takes the salt because it dissolves; the free acid would leave a suspension. A capsule built on the free acid is possible, but the label, the mass and the market file all have to be rebuilt around it. ## What to write into the specification - “Pyrroloquinoline quinone disodium salt, CAS 122628-50-6, C14H4N2Na2O8.” - “Assay 98.0–102.0% on the anhydrous basis by HPLC; loss on drying ≤5.0%.” - “Identification by HPLC retention and UV spectrum; report the absorbance ratios.” - “Sodium about 12.3% by ICP-OES, if the form is to be confirmed analytically.” - “Particle size ≥95% through 40 mesh; heavy metals and microbiology as listed.” - “Destination market and maximum use level confirmed before the order.” We supply the disodium salt. The free acid is a different purchase with a different specification, and it should not be substituted without a written change control and a check of the destination market. ## When the other form is the wrong choice If the formula is aqueous, the disodium salt is the practical choice. If the label names the free acid, the disodium salt is not a drop-in, because the declared ingredient and the weighed ingredient would differ. If the market file covers only the disodium salt, a free-acid lot is outside that file even when the assay is higher. The reverse is also true. A buyer who needs the free acid for a non-aqueous system should not accept the salt as “the same PQQ” and adjust the number afterwards. The form is part of the identity, not a unit conversion applied at the balance. The product hub carries the catalog specification. The level-four comparison takes the solubility and label questions further; the COA page shows how the form is reported; the compliance page covers the market entries; the identity page gives the tests that separate the two forms. ### 02.1 PQQ disodium vs free acid: solubility, dose and the label URL: https://nutrition.rainwoodbio.com/products/specialty/pqq/grades/disodium-vs-acid/ Reviewed: 2026-11-19 The disodium salt and the free acid differ by two sodium ions and about 44 mass units: 374.17 versus 330.21 g/mol. The disodium salt is the usual form in supplements and the form named in the EU novel-food entry; the free acid is the parent molecule and a different label ingredient. Switching form changes the assay conversion, the water solubility and the regulatory citation. In one lineTwo sodium ions change the molecular weight by 13%, the water solubility and the name that must appear on the label. ## Two forms, two identities PQQ is a tricarboxylic acid. The free acid carries the acid protons; the disodium salt replaces two of them with sodium ions. That is the whole structural difference, and it is enough to make the two materials separate specification items with separate CAS numbers. PQQ disodium salt against PQQ free acid | Property | Disodium salt | Free acid | CAS number | 122628-50-6 | 72909-34-3 | Formula | C14H4N2Na2O8 | C14H6N2O8 | Molecular weight | 374.17 | 330.21 | Sodium content | About 12.3% by mass | None | Appearance | Reddish-brown to dark red powder | Red to reddish-brown solid | Water solubility | Soluble; reddish-brown solution | Sparingly soluble | Label name | Pyrroloquinoline quinone disodium salt | Pyrroloquinoline quinone | EU novel-food entry | The form named in the entry | Not the form named in the entry ## The conversion between the forms The conversion factor is the ratio of molecular weights: 330.21 ÷ 374.17 = 0.8825. Multiply a disodium result by 0.8825 to express it as free-acid equivalent; divide a free-acid figure by 0.8825 to get the disodium mass. The factor is fixed by the formula, not by the assay. Two worked examples make the label dose arithmetic concrete. A formula that declares 20 mg of PQQ as free acid needs 20 ÷ 0.8825 = 22.66 mg of the disodium salt. A formula that declares 20 mg of PQQ disodium salt delivers 17.65 mg of free-acid equivalent. Neither figure is a recommendation; they are the arithmetic that keeps the label and the weigh-up in agreement. The assay basis is a separate conversion. A 99.0% result on the anhydrous basis is not 99.0% of the powder as weighed. Convert to the as-is basis with the loss on drying, then apply the salt factor if the label uses the other form; leaving either step out is the usual error. ## Solubility and the solution The disodium salt dissolves in water and gives a reddish-brown solution. It is the practical form for capsules, stick packs and aqueous systems because the powder disperses without a solvent. Solubility is still finite, and a concentrated stock may need pH adjustment, warming or sonication. The free acid is much less soluble in water and is normally handled in organic solvent or as a fine suspension. Solubility is not stability. The disodium solution is light-sensitive, and a clear bottle on a bench is the wrong container for a hold. The free acid has a different solution pH, so a formula built on one form cannot be switched to the other without rechecking the appearance, the pH and the hold time. For a beverage or a stick pack, the salt is the easier starting point. For a non-aqueous system, the free acid may be the only one that dissolves. The choice belongs to the formulation, and it should be made before the label is written. ## Stability follows the form and the pack Both forms are solids that need protection from light and moisture. The disodium salt is specified here at loss on drying ≤5.0%, and it picks up moisture when the pouch is left open. The free acid has its own moisture profile, but it is not automatically the more stable form; the handling and the pack still decide. The disodium salt in solution is the least stable format. Light, oxygen, heat and pH act together, and a hot-fill step adds a heat load that the powder never sees. The free acid in organic solvent has a different set of risks, including solvent residue and flammability. Neither form should be described as stable without the pack, the matrix and the time. The practical rules are the same on both sides: keep the solid sealed and dark, keep the solution protected and validated, and assign the retest period from data for the exact pack. The stability page sets out the protocol. ## What the label has to say In the EU, the novel-food designation is “Pyrroloquinoline quinone disodium salt”. The entry covers food supplements for adults excluding pregnant and lactating women, at a maximum of 20 mg/day, and it is tied to a defined specification. A free-acid ingredient is not covered by that entry, even if the assay is higher and the colour matches. In the United States, the Supplement Facts panel names the dietary ingredient. “PQQ” alone is ambiguous; the salt form should be written out in the panel. In Great Britain, the GB register has its own conditions and must be checked separately; Northern Ireland follows the EU list. The label must match the form that the market file covers, not the form that was ordered. ## When to choose which Choose the disodium salt for supplements, for aqueous systems, and for any market where the disodium entry is the one that applies. It is the form with the commercial specification, the sodium figure that proves it, and the label name used in the EU entry. This is the form we supply. Choose the free acid only when the formula or the label calls for it and the market file covers it. It is not a drop-in for the salt: the mass changes, the solubility changes and the regulatory citation changes. A switch in either direction needs a written change control, a new specification and a label check. The product hub carries the catalog specification; the grades page places this comparison in the wider range; the compliance page covers the market entries; the identity page gives the tests that separate the forms; the COA page shows how the form is reported. ### 03 PQQ disodium is light- and moisture-sensitive; the pack decides the shelf life URL: https://nutrition.rainwoodbio.com/products/specialty/pqq/stability/ Reviewed: 2026-11-19 PQQ disodium is sensitive to light and moisture, and heat accelerates both. The powder is most stable in a sealed, light-resistant pack at controlled humidity; an aqueous solution is the least stable format. Shelf life is assigned from stability data for the exact pack and storage condition, not from the certificate. In one lineLight and moisture are the two variables the pack controls; the shelf life is only as good as the seal, the liner and the storage condition behind it. ## The powder: moisture, light and colour The catalog sets loss on drying at ≤5.0%. That limit is a release gate, not a storage allowance. Once the foil pouch is opened, the powder can pick up moisture from the air; the loss on drying rises, the as-is assay falls, and the colour can shift. A tight seal and a dry store are part of the specification in practice, even when they are not printed on the certificate. Light is the second driver. PQQ is photolabile, and a clear container on a windowsill or a bench is an exposure. The powder should stay in its original light-resistant pouch, or in an opaque container that closes properly. A transparent jar is not a storage container for this material, however convenient it looks. Heat raises the rate of both moisture and light damage. Ambient warehouse temperatures are usually acceptable for the sealed pack; a hot loading bay, a car boot or a greenhouse is not. The pack should be allowed to equilibrate before opening after cold storage, so that condensation does not form on the powder. ## The solution: the least stable format The disodium salt dissolves in water to give a reddish-brown solution. In solution, light, oxygen, heat and pH act at the same time. A ready-to-drink process adds a heat load through pasteurisation or hot fill; a powder stick avoids that step because the consumer adds water at the point of use. If a liquid is unavoidable, protect it from light, control the pH, keep dissolved oxygen low, and validate the hold time before filling. A bulk-powder stability result does not transfer to a beverage. The matrix, the process and the pack each change the rate, and the drink's shelf life has to be measured in the drink. ## What drives degradation Factors that move PQQ disodium during storage | Factor | What it does | Control | Light | Photodegradation; colour and assay change | Opaque or foil pack; dark store | Moisture | Raises loss on drying; dilutes the as-is assay | Sealed pouch; desiccant where needed | Heat | Accelerates light and moisture damage | Controlled store; cool process | Oxygen | Oxidation in solution and at exposed surfaces | Low headspace; sealed pack; process control | pH | Changes solution stability and colour | Validate the matrix pH; buffer if needed | Metal ions | Colour and complexation in solution | Avoid iron and copper contact These factors are not independent. A warm, bright, humid store is worse than the sum of three separate effects, and a solution at neutral pH in clear glass combines all of them. The useful stability question is not “is PQQ stable?” but “stable in which pack, at which condition, for how long?” ## The pack is the barrier The standard pack is a 1 kg foil pouch. The foil is the light and moisture barrier; the seal is the weak point. A pouch that has been opened and folded over is not resealed in the same sense as a heat-sealed pack, and the headspace now contains humid air. For a long storage period, transfer the remainder to a smaller opaque container or use the pouch within the stated in-use period. The 25 kg fiber drum is the bulk pack. A fiber drum relies on its inner liner for the moisture barrier; keep the liner closed, keep the drum off a concrete floor in a humid store, and record the date of opening. The lot code on the drum, the liner and the certificate should match. For repacking, use a light-resistant, moisture-barrier container and keep the lot identity. A desiccant can help in a humid environment, but it is not a substitute for a seal. If the application needs a modified atmosphere, specify it; nitrogen flushing is not implied by the standard pack. ## A stability protocol for the ingredient A useful protocol states the pack, the storage condition, the time points and the tests. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% relative humidity cover the warehouse; accelerated storage at 40 °C/75% relative humidity stresses the pack. A light-exposure arm, following the standard photostability design, covers the failure mode that a dark incubator misses. Test assay, loss on drying, appearance, UV identity and microbiology at each point. For a beverage or a stick pack, repeat the work in the matrix and at the process pH and heat load. The report should show the individual results, not only a pass statement, and it should identify the pack and the lot family. Ask for the stability summary for the pack you will buy, not for a different pack from the same product family. A 25 kg drum and a 1 kg pouch have different surface-to-volume ratios, different headspace and different opening histories; the data belongs to the pack. ## The finished formula changes the answer A PQQ capsule or tablet starts with low water activity, yet the shell and the excipients can still move moisture into the fill, so loss on drying is checked at release and again after storage, alongside the appearance of the powder. A stick pack fails at the seal: a pinhole in the foil is enough, and the strip is inspected as well as the powder. Neither format inherits the shelf life of the bulk pouch. A beverage combines light, pH, heat and oxygen. The ingredient's bulk stability is the starting point, not the answer. The formulator decides whether an overage is needed; that is a label and stability decision, and it does not repair a pack that lets moisture in. ## How the shelf life is set We do not publish a single shelf-life number for PQQ disodium, because the pack and the storage condition set it. The assigned retest period belongs on the specification and is supported by the stability file for that pack. A number without a pack, a condition and a test panel is not a shelf life; it is a claim. After the retest period, re-assay the retained sample before extending use. Do not extend by assumption, and do not carry a bulk figure across to a repacked container. The product hub lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the HPLC note describes the assay; the quality page describes the release workflow. ### 04 PQQ disodium: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/specialty/pqq/moq/ Reviewed: 2026-11-19 The MOQ for PQQ disodium is 1 kg, supplied as a 1 kg foil pouch; the standard bulk pack is a 25 kg fiber drum. Lead time is 1–7 days for the standard pack. A firm quotation needs six pieces of information: form and CAS number, assay basis, quantity and pack, destination and Incoterm, documents, and the intended market. In one lineOne kilogram is the smallest order because it is the smallest pack that can be sampled, tested and traced as a lot. ## Why the minimum is 1 kg A 1 kg pack can cover a bench-scale trial, a retained sample and an independent identity test. It is also small enough to ship by air without a pallet, which matters when a formulator needs material before the production plan is fixed. The pack is a commercial unit with a lot code, not a scoop from a bulk drum. Below 1 kg, the material is usually split from a larger lot and repacked. That adds handling, loses the original pack identity and makes traceability harder, without changing the chemistry. The 25 kg drum is the bulk unit: it reduces handling per kilogram, but it commits inventory and a longer storage period. The MOQ is a pack decision, not a volume incentive. ## Packs and formats Standard PQQ disodium packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Light and moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Particle profile changes | Dilution | On request | Lower assay per gram | Carrier and label change The catalog form is a 40 mesh powder: ≥95% through 40 mesh. Granulation or dilution is a different specification, not a packing choice. If the dosage form needs a coarser or freer-flowing powder, say so before the quotation, because the change moves the particle-size line and may move the lead time. ## Lead time and dispatch The standard pack is quoted at 1–7 days from order confirmation. That window covers picking, document preparation and dispatch; it does not include the shipping transit, customs clearance or the customer's own quality release. A custom granulation, a dilution or a non-standard pack adds time, and the quotation should state it separately. Ask for the dispatch date, not just the 1–7 day range. A 1 kg PQQ pouch usually moves as a parcel, while the 25 kg fiber drum travels on a pallet; the Incoterm says who books the freight and who clears entry. The COA and the rest of the lot documents should be on the same journey as the pack, not sent after it arrives. ## What a quotation needs Six items make a quotation firm enough to compare: - Product and form. PQQ disodium salt, CAS 122628-50-6, with the salt form written out. - Specification. Assay basis, loss on drying, particle size, heavy metals and microbiology. - Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated or diluted variant. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, specification, SDS, and any market-specific statement the importer needs. - Intended use and market. Supplement, food or another use, and the market where it will be sold. A quotation without the market and the salt form is incomplete. The same powder can be suitable for one destination and outside the file for another, and the paperwork is part of the offer. We do not publish commercial terms on this page; they are stated on the quotation. ## The sample is a lot, not a demonstration The 1 kg pack is the qualification sample. Test identity, assay, loss on drying and microbiology before scaling, and keep a retained sample from the same pack. The lot code on the sample, the COA and the quotation should match. A sample that cannot be traced to a lot is a demonstration, not a qualification. A bench trial that needs less than a kilogram is a repack, not the catalogue pouch. It leaves a bulk lot, gets its own handling record and cannot be presented as the 1 kg foil pack. Ask for the split in writing and keep its lot code with the trial results. The powder on the bench and the powder in the production drum may come from different lots even when the specification is identical. ## Terms to settle before the first order The PQQ quotation should show the commercial terms and the quality terms on the same page: Incoterm, 1 kg pouch or 25 kg drum, dispatch window, the specification revision, a COA for each lot, the retained sample, the retest period and the route for any change. Settle those in a quality agreement before the first production order; the same conversation is harder after a dispute. If a PQQ lot misses the agreed specification, the route is the retained sample and a joint re-test against the named method, not a photograph of the drum. The quotation and the quality agreement should already say who pays for the referee laboratory and which laboratory both sides accept. A return decided on appearance alone is hard to defend on either side. The product hub carries the catalog specification; the COA page lists the release tests; the compliance page covers the market files; the MOQ glossary entry defines the term; the logistics page covers shipping and documents. ### 05 The regulatory file for PQQ disodium URL: https://nutrition.rainwoodbio.com/products/specialty/pqq/compliance/ Reviewed: 2026-11-19 PQQ disodium is supplied as pyrroloquinoline quinone disodium salt, CAS 122628-50-6. The catalog specification is the starting point; the regulatory file is built around the exact material, the destination and the finished-product route. The buyer's regulatory team confirms that route. This page lists the documents and checks that belong in the file, so the specification and the commercial pack can be reviewed together. In one lineThe specification describes the material; the regulatory file shows the route, the limits and the label for the destination. ## What the file contains The PQQ file has to hold four things at once: the specification version for the disodium salt, the certificate that releases the lot, the limits and label rules for the finished product, and the record of how source, process and pack changes are handled. The COA reports the lot, the TDS states the specification and the SDS covers handling. None of them settles the destination route, which is recorded separately in the file. Beyond the certificate, the PQQ pack should carry the allergen and GMO statements, the origin record for the manufacturing source, the residual-solvent statement and any declaration the customer needs. If one of those is missing for the lot, name the gap before the order moves; it is easier to close at quotation than at the port. Keep a versioned document list at the front of the folder. ## European Union For the EU, the PQQ disodium file is anchored to the novel-food entry: the entry names the salt, restricts use to adult food supplements, sets a ceiling of 20 mg/day and ties the authorisation to its specification. The buyer's regulatory team fixes the member-state route and checks the specification against the material placed on the market. General food law, labelling and contaminant limits sit alongside that route, and the current consolidated text is the reference. The EU regulatory notes collect the framework references. ## United States In the US, the question is how PQQ disodium is positioned as a dietary ingredient and whether the intended use fits that position. The supplier names the basis it relies on and the document behind it; the buyer checks that the basis extends to the finished product and the claim. Structure/function language is reviewed on its own, with substantiation and the DSHEA disclaimer, and neither label review nor claim review is part of the certificate. ## United Kingdom The UK is not one file. Great Britain uses the GB register and GB labelling; Northern Ireland sits under the EU framework, including the novel-food entry for PQQ disodium. The delivery address decides which applies, and the buyer's regulatory team records that decision with the order so the label and the entry cited can be checked later. ## Contaminants and limits The contaminant panel is a finished-product calculation, not only a drum result. The table below is the usual starting point for a food-supplement file; the current destination text and the daily dose decide the final limit. Contaminant limits to confirm for the finished product | Parameter | Typical supplement reference | What the file should show | Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method, limit and the finished-product calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception that applies | Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result and method | Arsenic (As) | Customer or market limit | The agreed limit and the method, stated on the certificate ## Label and claims On the label, PQQ has to appear as the disodium salt, with the quantity per serving and the source stated in the form the market requires. Claims sit in a different review: the brand's reviewer checks the wording against the product, the form and the market. A certificate supports the material, not the claim, and a claim revision never reopens the specification. ## Claims for PQQ The salt form is part of the claim file. In the EU, as of this review, the novel-food designation is “pyrroloquinoline quinone disodium salt”, limited to adult food supplements and a maximum of 20 mg/day, with the specification attached to the entry; a claim written for the free acid does not transfer to the salt, and the reverse is also true. In the US, a structure/function statement on PQQ needs substantiation and the DSHEA disclaimer. No disease claim is open in either market, and mitochondrial or energy language is mechanism language, not an authorisation. This site publishes the specification and makes no health claim. ## Documents for the PQQ file The buyer's file needs the COA with the HPLC assay on the anhydrous basis, the UV absorbance ratios used for identity, loss on drying, sodium by ICP-OES to confirm the disodium salt, the metal panel and the micro count. The specification must name the disodium salt and the assay basis; an as-is figure and an anhydrous figure are not interchangeable. Add the source and process description, the TDS, the SDS, allergen and GMO statements, the residual-solvent statement and the EU novel-food status for the disodium salt. The PQQ product page carries the catalogue specification. For this product, the file starts with the catalog specification and the lot certificate. The buyer adds the destination route, the finished-product dose and the label review; the supplier keeps the source, process and pack under change control. ## Checklist before the first order - Specification version, CAS and the exact form are named. - COA, TDS, SDS, allergen, GMO, origin and residual-solvent statements are on file. - The contaminant results are converted to the finished-product dose. - The label and the claim have been reviewed for the destination. - The source, process and pack are under change control. - The quotation, the specification and the certificate refer to the same version. The product page carries the catalog specification; the COA page explains the lot certificate; the identity page covers the analytical evidence. The quality page describes the release file, and the regulatory notes provide the framework references. ### 06 How we prove a PQQ lot is the disodium salt URL: https://nutrition.rainwoodbio.com/products/specialty/pqq/identity/ Reviewed: 2026-11-19 A PQQ lot is the disodium salt when four lines agree: the document names the form and CAS number, HPLC retention and UV spectrum match the reference, the sodium content is close to the theoretical 12.3%, and the moisture and assay close the mass balance. The assay alone cannot separate the disodium salt from the free acid or from a dilution. The sodium figure is a direct check. In one lineIdentity is a set of agreeing measurements: retention and UV say the quinone, sodium says the salt, and moisture closes the mass balance. ## The four identity layers A certificate can name the right material and still fail to prove it. The four layers below are separate questions, and each one needs its own evidence. A supplier who answers only the first has described the paperwork, not the powder. Four layers of PQQ disodium identity | Layer | Question | Test | What it proves | Document | Is the form named? | Name, CAS number, formula | Paperwork only | Chromatography | Is the quinone PQQ? | HPLC retention and UV spectrum | The molecule, not the salt | Counter-ion | Is it the disodium salt? | Sodium by ICP-OES | The salt form | Mass balance | Is it diluted? | Assay, loss on drying, impurities | Consistency of the numbers ## HPLC and UV: proving the quinone The HPLC method should name the column, the mobile phase, the wavelength and the standard. Identity is retention time plus spectrum. A single peak at the right time can be a different quinone or a degraded standard, so the spectrum is the second dimension rather than a decoration. PQQ absorbs in the ultraviolet. The EU specification reads absorbance ratios at 233, 259 and 322 nm: A322/A259 0.56 ± 0.03 and A233/A259 0.90 ± 0.09. The catalog here requires “HPLC and UV conform” rather than fixed ratios, so the certificate may report conformity. If the form is disputed, ask for the chromatogram and the spectrum, not only the percentage. A certificate that gives a retention time and no spectrum has not shown the second dimension. ## The sodium ratio: proving the salt The disodium salt has two sodium ions per molecule. The theoretical sodium content is 2 × 22.99 ÷ 374.17 = 12.29% by mass. A sodium result close to 12.3%, with a 98–102% assay, is consistent with the disodium salt. A low sodium figure points to free acid, a dilution or a different salt; a high figure points to another sodium salt or a buffer. Sodium by ICP-OES is not on the catalog specification, so it is an additional test rather than a routine line. Request it when the form is disputed, when a new source is being qualified, or when the label names the disodium salt and the certificate does not. The solution pH is a supporting check, not a quantitative one: it can move with concentration and with residual acid. The ratio also catches a physical blend. A powder made from disodium salt and free acid can be formulated to land inside the assay range, but its sodium figure lands below 12.3% in proportion to the free-acid fraction. The assay sees the total quinone; the sodium sees the counter-ion. ## X-ray diffraction: the solid-state check X-ray diffraction answers a different question: is the solid crystalline, and does its pattern match a reference? It can distinguish a crystalline salt from an amorphous dilution, and it can compare lots from two sources. It is not a purity assay and it does not measure the counter-ion. Ask for the reference pattern and the detection limit before reading a “match” statement. For a disputed lot, XRD plus sodium plus HPLC/UV is stronger than any one of them. XRD is not a routine release test for this product, and a certificate that reports only “XRD conforms” without the pattern or the reference has added little. The method is most useful when the question is solid form rather than assay. ## What adulteration looks like Common PQQ disodium substitutions and the signals | Adulterant | What it does | Signal | Test | Free acid | No sodium; lower pH; lower solubility | Sodium below 12.3%; assay shift | Sodium by ICP-OES, pH, solubility | Other quinone | Similar colour and UV, different retention | Extra peak; ratio shift | HPLC/UV, high-resolution MS | Dilution | Lowers assay; changes loss on drying | Assay low; sodium low | Mass balance, sodium | Dye | Matches colour, not the spectrum | Colour without a UV match | UV spectrum, HPLC | Moisture | Raises loss on drying; lowers the as-is assay | LOD high; anhydrous assay normal | Loss on drying Colour is the weakest signal. Reddish-brown to dark red covers a wide range, and a dye can reproduce it. The stronger signals are the sodium figure, the UV ratios and the mass balance. A certificate that reports appearance and assay but not identity has left the most likely substitution untested. ## How to write the identity into the specification - “Pyrroloquinoline quinone disodium salt, CAS 122628-50-6, C14H4N2Na2O8.” - “Assay 98.0–102.0% on the anhydrous basis by HPLC; loss on drying ≤5.0%.” - “Identification by HPLC retention and UV spectrum; report the absorbance ratios.” - “Sodium about 12.3% by ICP-OES, where the form is to be confirmed analytically.” - “Particle size ≥95% through 40 mesh; heavy metals and microbiology as listed.” - “No free acid or other quinone above the stated limit.” - “Destination market and salt form confirmed before the order.” ## Five questions for the supplier - Which salt form is this lot, and which CAS number is on the certificate? - Can you provide the HPLC chromatogram and the UV spectrum, not only the assay percentage? - What is the sodium result by ICP-OES, and what method was used? - What is the loss on drying for this lot, and how was the assay basis calculated? - If the lot is disputed, will you accept a joint re-test on the retained sample? Five direct answers amount to an identity file. A single assay percentage does not. The product hub carries the catalog specification; the COA page shows where each figure sits on the certificate; the grades page compares the two forms; the level-four comparison covers the label consequences; the HPLC method note explains the separation. ### 01 What the COA for spermidine actually contains URL: https://nutrition.rainwoodbio.com/products/specialty/spermidine/coa/ Reviewed: 2026-11-19 The certificate for a spermidine lot reports appearance, identification by GC or HPLC and by IR, assay by GC or HPLC, water by Karl Fischer, particle size, the heavy-metal panel and microbiology. Each line should carry the method, the acceptance limit and the result measured on that lot. The values here describe the catalog specification; a particular pouch or drum is confirmed by its batch COA. An assay on its own does not say whether the 98.5% refers to the free base, to a salt, or to the powder as sold. In one lineA ≥98.5% assay answers how much of a molecule is present; the form, the method and the water figure say which molecule and on which basis. ## The certificate as a test report A spermidine certificate is short, so every line has room to be specific. The molecule is a small basic polyamine with no useful ultraviolet chromophore, which is why the assay method deserves more attention here than on a mineral salt: GC and HPLC are both used, and the certificate should say how the detector sees the molecule. Identity, assay and moisture · spermidine | Parameter | Method | Release limit | Appearance | Visual | White to pale cream crystalline solid or melt | Identification | GC or HPLC retention against a reference; IR | Conforms to the reference | Assay | GC or HPLC | ≥98.5% | Water | Karl Fischer | ≤1.0% Physical, contaminant and microbiological limits | Parameter | Method | Release limit | Lead | ICP-MS | ≤3 mg/kg | Arsenic | ICP-MS | ≤2 mg/kg | Cadmium | ICP-MS | ≤1 mg/kg | Mercury | ICP-MS | ≤0.1 mg/kg | Particle size | Sieve | ≥95% through 40 mesh | Total aerobic count | Plate count | ≤1,000 cfu/g | Yeast and mould | Plate count | ≤100 cfu/g | E. coli | Absence test | Absent | Salmonella | Absence test | Absent ## GC, HPLC and the basis behind the percentage GC may run on the free base or on a derivative; either way the method has to be built for a basic amine, and a capillary column with a nitrogen-selective detector is one arrangement. HPLC is often chosen for a salt or for a laboratory that prefers a liquid method, and there the detector matters. With no chromophore on the molecule, a UV method implies that the sample was derivatised before injection; a method without derivatisation needs a detector that responds to the amine itself, such as mass spectrometry, evaporative light scattering or charged aerosol. A certificate that says "HPLC 98.7%" without the detector leaves the reader unable to judge the number. Two basis questions sit behind that percentage. First, is the assay calculated on the powder as sold or on the dried solids? With water allowed up to 1.0%, a lot at 98.5% as-is is about 99.5% on an anhydrous basis, and the two statements describe the same drum. Second, which form was weighed? Spermidine free base is CAS 124-20-9 and the trihydrochloride is CAS 334-50-9; the salt is roughly 57% free base by mass, so a 98.5% assay on the salt corresponds to about 56% spermidine. The certificate should name the form and the CAS, and the purchase order should name the same one. ## Release limit versus batch result The release limit is the boundary the lot was accepted against. The batch result is what the laboratory measured. A certificate that prints the specification range in both columns has not reported a result; it has copied the gate. On a short certificate the distinction is easy to audit. Water is the row where the result carries the most information. At ≤1.0%, a lot at 0.2% and a lot at 0.9% both pass, but they behave differently in a capsule room and in a pouch that will be opened repeatedly. Assay close to 98.5% deserves the same attention: it leaves less room for related polyamines and water, and the mass balance should be readable. The metal and microbiology lines read as pass or fail against fixed limits, but the individual element and count results still belong on the page; "conforms" is a conclusion, not evidence. ## What moves between batches Assay and the related-peak profile follow the synthesis and the purification. Water follows the drying step, the packing room and the season; a lot packed on a humid day can sit at the top of the water window with the assay unchanged. Appearance and particle size follow crystallisation, the melt handling and the milling step, which is why a 40 mesh powder and a resolidified melt can share a certificate but not a filling line. The chromatogram is the part of the record that is most often summarised away. Putrescine and cadaverine are close relatives of spermidine and can appear as neighbouring peaks; a report that lists only the main peak has not shown whether they were separated. Ask for the related-substance section, not only the assay. A trend of rising water across several lots points at packing, while a rising related-peak area points at the process, and the two call for different replies. ## When to order an outside test An independent laboratory is worth the delay when the supplier is new, when the first delivery goes into a regulated market, when the form is disputed, or when a quotation looks unlike the rest of the market. The useful panel is targeted rather than exhaustive: GC and HPLC on the same submitted sample, IR against a reference spectrum, Karl Fischer water, ICP-MS for the metal panel, and a polyamine scan that reports putrescine and cadaverine with a stated limit of detection. Ask the laboratory to print its detection and quantification limits. "Not detected" without a limit describes the method, not the sample. Where the question is whether the powder is an isolate or an extract, the same sample should also be screened for sugars and other extract solids; an assay that passes while water and the related peaks do not add up points at what else is in the drum. Chain of custody matters as much as the method: the sample tested should be the sample retained, and its lot code should match the pack and the supplier's certificate. ## What to compare between suppliers Compare six lines: the form and its CAS; the assay method and basis; water; the related polyamines; particle size; and the metal and microbiological results. If two quotations agree on the assay and diverge on the other five, they are not describing the same powder. A salt quoted against a free-base specification will pass an assay and fail the mass balance, while an extract sold as an isolate will fail the water and the related peaks. Traceability is the second test. The code on the certificate, the pack and the retained sample should be one code, and the certificate should name the manufacturer. A genuine certificate can still be attached to the wrong drum. The catalog specification sits on the spermidine product page. The source routes are compared on the grade page, the tests that separate the molecule from its neighbours are on the identity page, and the release workflow is described on the quality page. The chromatographic method is outlined in the HPLC method note. ### 02 Pure spermidine or wheat germ extract: choosing a source URL: https://nutrition.rainwoodbio.com/products/specialty/spermidine/grades/ Reviewed: 2026-11-19 “Spermidine” on a quotation can mean two different articles. One is an isolated substance, typically ≥98.5% by GC or HPLC, with CAS 124-20-9 for the free base and a salt form available as well. The other is a spermidine-rich wheat germ extract, a mixed powder whose spermidine content is stated in milligrams per gram and which the EU lists as an authorised novel food at 0.8–2.4 mg/g. The two differ in dose mass, assay basis, allergen risk and regulatory file, so the source is a specification decision before it is a label decision. In one lineThe source route fixes the assay basis, the mass per dose and the regulatory file; it is a specification decision before it is a label decision. ## Two articles under one word The isolate is a single molecule. It can be supplied as the free base, a low-melting solid that may arrive crystalline or as a melt, or as a salt such as the trihydrochloride, which is a stable crystalline powder but carries only about 57% spermidine by mass. Beyond the molecule itself there is little else in the drum apart from water. The extract is a mixture. It is made from wheat germ and sold on a stated spermidine content, and it also contains spermine and the rest of the extract matrix. In the EU the authorised article is defined, not generic: the Union list describes an extract of wheat germ that has not been fermented or germinated, specified at 0.8–2.4 mg spermidine per gram. That is under a quarter of one percent, which is the fact that changes everything downstream. Neither route is a purer version of the other. They are different ingredients with different specifications, and a quotation that names only “spermidine” has not yet named the material. ## The comparison that matters Spermidine content by source route | Source | Spermidine per gram | What the figure refers to | Free base, ≥98.5% | about 985 mg | Assay of the molecule as sold | Trihydrochloride, 98% | about 559 mg | Salt assay multiplied by the 57.0% free-base fraction | Wheat germ extract | 0.8–2.4 mg | Spermidine content of the authorised extract The table is arithmetic, not a grade ranking. A gram of isolate carries roughly four hundred times the spermidine of a gram of extract at the top of its range, and over a thousand times the spermidine of a gram at the bottom. That ratio, not the word on the front of the pack, decides how much powder a serving needs. ## What the powder is like to handle The isolate is white to pale cream, milled to 40 mesh and freely soluble in water. It is hygroscopic, so it wants a sealed liner and a dry room, and the melt form needs a defined handling temperature: a pouch that has been warm can arrive as a block even though the assay is unchanged. Because the dose is small, the analytical and weighing side of the process matters more than the bulk. The extract is a larger mass of powder for the same spermidine figure, with its own colour, carrier and water content. Content uniformity is the practical issue: a low analyte level in a large powder mass has to be distributed evenly, and the certificate should state the spermidine result for the lot rather than a range copied from the specification. Wheat is a cereal that carries gluten, so the allergen question belongs at the grade stage, not at the artwork stage. ## What the dose does to the dosage form The EU entry for the extract is written as a maximum equivalent to 6 mg of spermidine a day. Using that figure only as an arithmetic example, 6 mg is about 6.1 mg of a 98.5% isolate, about 10.7 mg of a 98% trihydrochloride, 2.5 g of extract at 2.4 mg/g, or 7.5 g of extract at 0.8 mg/g. The first two fit in a small capsule; the last two do not fit in one. That is the formulation consequence. A capsule or tablet programme is usually an isolate programme, because the mass is small and the fill weight is dominated by excipients. A stick pack, a drink mix or a multi-capsule serving can carry the extract, where the powder mass is part of the product rather than an obstacle. The same arithmetic explains why a dilution or a granulated form is sometimes offered: it makes a small dose weighable on a production line. ## What to write into the specification For an isolate, the specification names the form and its CAS, the assay method and basis at ≥98.5%, water at ≤1.0% by Karl Fischer, identity by GC or HPLC and IR, 40 mesh, the heavy-metal and microbiological panels, and the pack. For an extract, it names the spermidine content in mg/g with the method, the spermine and related-polyamine limits, the carrier, water, the metal and microbiological panels, the wheat and gluten statement, and the authorisation reference the article is sold against. A specification that mixes the two is a specification for neither. “Spermidine ≥98.5%” cannot describe an extract at 0.8–2.4 mg/g, and “spermidine-rich wheat germ extract” cannot describe a 40 mesh isolate. Whichever route is chosen, the certificate, the label and the purchase order should use the same name. Labels follow the article. In the EU the extract carries its novel-food designation, while an isolate, where it is lawfully used, is named as the substance; in the US the amount per serving goes on the panel without a percentage and the source goes in the ingredient list. A source change is therefore an artwork change, not a purchasing detail. ## When the other route is the wrong one The extract is the wrong choice when the serving would need more than two grams of powder, when the label cannot carry the wheat declaration, or when the content sits at the edge of the authorised range and the dose cannot absorb the variation. The isolate is the wrong choice when the destination market's file covers the extract article rather than an isolated substance, or when the product concept depends on the extract name itself. The source route is compared in more detail on the pure versus wheat germ page. The certificate lines are set out on the COA page, the market question on the compliance page, and the packs and minimum on the MOQ page. The spermidine product page carries the catalog specification. ### 02.1 Pure spermidine vs wheat germ extract: dose, purity and the label URL: https://nutrition.rainwoodbio.com/products/specialty/spermidine/grades/pure-vs-wheat-germ/ Reviewed: 2026-11-19 Pure spermidine and a spermidine-rich wheat germ extract are not interchangeable at the same milligram. A 98.5% isolate carries about 985 mg of spermidine in every gram; the extract described in the EU authorisation carries 0.8–2.4 mg/g. A serving that supplies 6 mg therefore needs about 6 mg of the isolate or between 2.5 and 7.5 g of the extract. The capsule count, the label and the regulatory file all follow from that difference in mass. In one lineA gram of 98.5% isolate carries about 985 mg of spermidine, while a gram of the authorised extract carries at most 2.4 mg — a difference that decides the capsule count, the label and the regulatory file. ## What the percentage is measuring Spermidine content per gram of each article | Article | Stated figure | Spermidine per gram | What the figure measures | Free base | ≥98.5% | about 985 mg | The molecule as sold | Trihydrochloride | 98% | about 559 mg | The salt, of which 57.0% is base | Wheat germ extract | 0.8–2.4 mg/g | 0.8–2.4 mg | Spermidine content of the extract The conversion is the first thing to do with any quotation. An isolate figure is a percentage of the molecule, and for a salt it has to be multiplied by the free-base fraction before it can be compared with anything else. An extract figure is already a content, expressed in milligrams per gram, and it applies to the extract powder rather than to the wheat germ it came from. Two quotations that both read “spermidine 98%” are only comparable once the form is named. The 0.8–2.4 mg/g range is not a market average; it is the specification attached to the authorised article in the EU. An extract sold at 10 mg/g, which is 1%, is outside that range and is therefore not the article the entry describes, whatever its spermidine content. That distinction belongs in the specification and on the label. ## The dose arithmetic Arithmetic example · 6 mg spermidine, 500 mg capsules | Article | Mass for 6 mg | Capsules at 500 mg | Free base, 98.5% | about 6.1 mg | Well under one | Trihydrochloride, 98% | about 10.7 mg | Well under one | Extract, 2.4 mg/g | about 2.5 g | Five | Extract, 0.8 mg/g | about 7.5 g | Fifteen Six milligrams is used here only because the EU entry caps the extract at the equivalent of 6 mg of spermidine a day. It is an arithmetic example, not a dose recommendation. What the table shows is the design space: an isolate serving is a few milligrams and disappears into a capsule fill, while an extract serving is grams and determines the dosage form. A stick pack, a powder for dispersion or a multi-capsule serving can carry the extract; a single small capsule cannot. The same arithmetic explains dilution and granulation. When the active mass is a few milligrams, a production line needs a larger, more uniform powder to weigh accurately. A declared dilution solves a handling problem; an undeclared one changes the dose on the label. ## Purity is not one number For an isolate, purity is the assay of the named molecule. At 98.5% with water at ≤1.0%, the powder is almost entirely spermidine and the remaining fraction is water and related peaks. For a salt, the assay belongs to the salt: a 98% trihydrochloride is a pure salt that is 56% spermidine by mass. Calling it 98% pure and 56% active are both correct, and a label that uses one number without the other can mislead. For an extract, “purity” is the wrong frame. The product is a mixture by design, with spermidine at 0.8–2.4 mg/g alongside spermine and the rest of the extract matrix. Its quality question is content and consistency, not a percentage of the whole. A buyer comparing “98%” with “0.2%” is comparing a molecule with a food ingredient, and the comparison says nothing about which one suits the product. ## What the label has to carry In the EU, the authorised extract has its own designation: the novel-food entry requires the extract to be labelled as a spermidine-rich wheat germ extract. The entry also restricts use to adult supplements, excludes pregnant and breastfeeding women, and caps the daily intake at the equivalent of 6 mg. Wheat sits among the cereals containing gluten in Annex II to Regulation (EU) No 1169/2011, so the allergen declaration has to be considered for the extract route. An isolate, where it is lawfully used in the destination market, is named as the substance in the ingredient list, and the quantity per serving is declared in the supplement panel. In the US, the panel gives the amount per serving and no percentage when the ingredient has no Daily Value, and the source is named in the ingredient list. In both markets, the label describes the article that is in the pack, not the article that was considered during development. This is a map of the questions, not legal advice. The current text of the novel-food entry, the allergen rules and the destination market's supplement rules should be checked before artwork is approved; the compliance page sets out the sequence. ## When to choose which The extract fits a product whose serving mass is already measured in grams, whose label can carry the wheat statement, and whose EU file is built around the authorised article. It also fits a positioning that depends on the extract as an ingredient rather than on a number of milligrams. The isolate fits a small capsule or tablet, a tight fill weight, a market where the isolate route is established, and a label that should not carry a cereal allergen. What should not happen is a switch of source after the label is written. The two articles differ in content, allergen status, authorised designation and dose mass, so a change of source is a change of product. The source routes are compared at level three on the grade page; the certificate lines are on the COA page; the ordering units are on the MOQ page; the catalog specification sits on the spermidine product page. ### 03 Spermidine is hygroscopic; the pack and the matrix decide the shelf life URL: https://nutrition.rainwoodbio.com/products/specialty/spermidine/stability/ Reviewed: 2026-11-19 Spermidine is hygroscopic, so an opened pouch takes up water, the Karl Fischer figure climbs and the 40 mesh powder starts to cake. Warm storage adds a second failure route: the free base has a low melting point and can soften and resolidify into a block that still passes assay. In water it forms an alkaline solution and oxidises slowly, so a drink or a wet matrix needs its own study. A shelf life is a conclusion from stability data on this form and this pack, not a property of the name on the label. In one lineA sealed pack protects what the drying step left; water, warmth and the matrix are what shorten the shelf life. ## The dry powder and the melt Sealed at room temperature, the powder holds the assay it was released with. The ≤1.0% water limit serves two purposes: it is a release gate, and it is the first thing to move when a pack has been opened in a damp room. After the liner is cut, the powder draws moisture from the air; the KF figure climbs before the assay shifts, and a 40 mesh powder that flowed on Friday can bridge in the hopper after a few damp days. Melting is a separate failure. The catalog describes the material as a crystalline solid or a melt, which reflects a free base with a low melting point rather than a defect in the lot. A pouch left in a warm warehouse or a hot vehicle can soften and then set into a lump; the certificate still reads correctly, but the lump has to be broken and the particle size no longer matches the 40 mesh line. The handling temperature belongs in the storage instruction and in the receiving check, not only in the process notes. Control is procedural as much as packaging: a liner that is genuinely sealed, a desiccant where the climate calls for one, a closing routine between weighings, and storage away from warm walls and skylights. The handling question is covered with the packs on the MOQ and packaging page. ## In solution Spermidine dissolves freely in water, and the resulting solution is alkaline because the free base is a polyamine rather than a salt. That matters in a drink: the pH of an unbuffered formula rises when the powder is added, and an acidic formula protonates the molecule, which changes taste and changes which form is in the bottle. Measure the pH of the real formula, not of water. Oxygen is the second route. The amine oxidises slowly in the presence of oxygen, light and trace metals, and the rate rises with temperature. Colour drift and a falling assay are late signals; the related-peak profile in the chromatogram usually moves first. A clear bottle under display light is the case to study on its own rather than assume. Microbiology is a third, separate question. A clear, unpreserved aqueous format can support growth whatever the active is, so preservation and water activity belong in the same trial as the chemical measurements. ## What actually moves the result Stability factors · spermidine | Factor | Effect | Control | Water | Higher KF figure, caking, poor flow | Sealed liner, desiccant, dry handling | Warm storage | Softening and a resolidified block | Defined handling temperature, shaded storage | Oxygen in solution | Oxidation, colour drift, falling assay | Deaerated water, inert headspace, closed process | Alkaline pH | Formula pH shift, taste change | Buffer and trial the final matrix | Iron and copper traces | Faster oxidation | Metal limits in the specification | Light | Colour drift in solution | Opaque or amber pack, dark storage | An opened pack | Water uptake between weighings | Reseal, small working packs, dry room ## The stability protocol Bulk stability work holds the powder in the pack it will be sold in, at 25 °C/60% RH and 40 °C/75% RH. Samples are pulled at release, then at three, six, twelve and twenty-four months, and each pull covers assay, Karl Fischer water, appearance, the related-polyamine profile, particle size and microbiology. A cycling leg is worth adding here: it reveals whether a warm spell fuses the powder, which a steady-condition study can miss. The warm leg is a stress condition rather than a storage instruction, and exists to make a trend appear inside the study window. A finished-product study is needed as well, not as a substitute. The capsule, stick pack or drink is stored in its own pack at 30 °C/65% RH and at 40 °C/75% RH, and tested for assay, water, appearance, taste and pH where relevant. Bulk can pass while the finished pack fails, and the finished pack is what carries the date. ## Formulation and packaging Capsules and tablets. Once the powder is inside a shell, water is the main risk. A hygroscopic active sharing the capsule with a damp excipient will pull that water towards itself even when the shell is intact, so the excipient's moisture belongs in the formulation review. Direct compression does not add water; wet granulation brings water and heat in the same step. Stick packs. The seam is the weak point. A sealed foil laminate is the starting point; a clear or paper format is a presentation choice that needs its own data, and one pinhole in a seam undoes a good laminate. A desiccant can be specified for a humid destination. Gummies and chews. Both risks are active here: the matrix is wet and the process is warm. Add the powder at the coolest, latest point the line allows, keep water activity under control, and follow colour through the study rather than only at release. Drinks and powders for dispersion. Oxygen, pH, light and preservation decide the outcome. Nitrogen flushing or deaerated water can be written into the process; a clear bottle displayed under light is the case to study separately. ## How shelf life is assigned A shelf life comes from data on a named pack and a named matrix. The data sheet should name the storage condition and the retest or expiry period the work supports. Bulk that will be tested again before use can carry a retest date; a consumer pack, by contrast, needs a date that can be printed and read. If the pack or the matrix has not been studied, a shorter period or a new study is the defensible answer. A period borrowed from a different laminate, a different fill or a different climate proves little about this pack. Ask for the remaining shelf life at shipment as well as the total: a lot that has sat in a warehouse for a year reaches the buyer with less time left than the total suggests. The parameters followed over time are the ones listed on the COA page; the quality page describes how the lot record and the study data are held; the spermidine product page carries the catalog specification. ### 04 Spermidine: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/specialty/spermidine/moq/ Reviewed: 2026-11-19 An order can start at 1 kg, cut from a lot that has already been released and sent with that lot's certificate. Production runs use the 25 kg fiber drum; the 1 kg foil pouch is the trial format. Dispatch is quoted at 1–7 days after confirmation, but only once the source route, the pack and the destination market are fixed. Because the material may be a crystalline solid or a melt, the pack and the temperature it is kept at are part of the order. In one lineOne kilogram drawn from a released lot is the qualification unit; the source route and the destination market shape the rest of the order. ## Why the minimum is one kilogram The first purchase exists to qualify a material, not to stock a shelf. One kilogram is enough for laboratory work, a pilot run on an encapsulator or tablet press, and a brief stability check, with material left over for a repeat. It is cut from a released lot, so the trial powder and the certificate in the file come from the same batch. One kilogram is also a packing and documentation unit. Where the lot is large enough, a bigger order is drawn from it; where it is not, a fresh lot is made and a fresh certificate issued. The certificate follows the lot that fills the drum, so pouch, drum and paperwork should carry the same lot code. The small order tests handling too. A hygroscopic solid with a low melting point shows quickly how it behaves after the first opening, how carefully the liner has to be closed, and whether it survives the journey into the buyer's store. ## Packaging Standard packs · spermidine | Pack | Where it fits | Notes | 1 kg foil pouch | Trial, sample and small runs | Food-grade liner sealed inside; desiccant for humid climates; name, form and lot printed outside | 25 kg fiber drum | Production | Lined, tamper-evident, with the lot label on the outside What the powder actually touches is the liner; once it is split, or the drum is left open, the storage condition changes whatever the label says. A desiccant can be added to the packing specification for a humid destination. For the melt form, transit and storage temperatures have to be agreed as well, because a warm container can turn an intact pack into a solid block. Each pack should show the product name, source route, form, net mass, lot and storage condition. If those details cannot be tied to a certificate, traceability has failed before the powder is used. Both formats should be opened and closed in a dry area; the pouch is a working pack rather than a retail pack and needs resealing between weighings. ## Lead time Dispatch is quoted at 1–7 days from confirmation of the specification and the order. The clock does not start at the first enquiry; it starts when the source route, quantity, pack and paperwork are agreed. Milling to 40 mesh, granulation, a dilution or an outside laboratory test takes extra time and should be a separate line on the quotation. Three things usually move the date: a specification changed after confirmation, a document asked for late, and a destination rule that requires a licence or another test. Putting all three on the table in the first exchange protects the date better than chasing it afterwards. A launch date belongs in the brief, not in a later message. ## What the quotation needs Six answers make an enquiry quotable: - Which source route and form are wanted — free base, trihydrochloride or wheat germ extract — with the CAS and the specification version? - How much is wanted for the first delivery, and what annual volume should be planned for? - Where will the powder go — capsule, tablet, stick pack, drink or gummy — and in which pack? - Which destination market, and which intended use? - Which documents does that market require — certificate, technical data sheet, safety data sheet, allergen statement, authorisation reference? - Which delivery date and Incoterm apply? A competitor's certificate is a useful substitute for a written brief early on, because it shows the tests and limits the buyer already works to. Send it and the answer becomes a counter-specification: what can be met, what cannot, and what would need a trial. A quotation that says only “spermidine” has not yet quoted a material. ## Samples A sample comes from a released lot and is sent with that lot's certificate. Ask for the form the trial will use — 40 mesh, granulated or diluted — rather than the catalog powder, or the trial will answer a question nobody asked. A sample with no certificate is a demonstration, not a qualification. The amount should match the trial protocol: enough for the capsules or tablets and the panel, plus a reserve. Keep part of it back as a sealed, dry reference so the trial result can be compared with the production lot later. ## Payment, claims and terms Payment terms, Incoterm and the document set are fixed in the order confirmation. Destination, volume and whether the buyer is new all change them, so a website cannot state them in advance. A complaint is assessed against the retained sample and the certificate for that lot. Raise it as soon as the pack is opened, with photographs of the outer pack and its lot label, so it can be attached to the lot record. A purchase order should name the source route, form, assay method and basis, water limit, mesh, pack and documents, and attach the specification so the certificate can be checked line by line. What belongs on the certificate is explained on the COA page; how a change of source route affects the order is on the grade page; the compliance page covers the market question before the first drum is booked. The quality page describes the lot record; the spermidine product page carries the catalog specification. ### 05 The regulatory file for Spermidine URL: https://nutrition.rainwoodbio.com/products/specialty/spermidine/compliance/ Reviewed: 2026-11-19 Spermidine is supplied as spermidine crystalline solid, CAS 124-20-9. The catalog specification is the starting point; the regulatory file is built around the exact material, the destination and the finished-product route. The buyer's regulatory team confirms that route. This page lists the documents and checks that belong in the file, so the specification and the commercial pack can be reviewed together. In one lineThe specification describes the material; the regulatory file shows the route, the limits and the label for the destination. ## What the file contains The spermidine file is only complete when four layers agree. First, the specification version and whether the article is the isolate or the wheat-germ extract. Second, the certificate issued with the released lot. Third, the limits and label rules at the destination. Fourth, the record of what changes when the source, the process or the pack changes. COA, TDS and SDS answer parts of the first three; the destination route is a decision of its own and is written into the file. For the wheat-germ route, the supporting pack carries a gluten statement alongside the GMO and origin records; the isolate route still needs the origin record and the residual-solvent statement. A declaration written for the generic product is not enough when the source route changes what the file must show. List every statement with its version, and name any gap before the purchase order rather than at the port. ## European Union Inside the EU, the file follows the article being sold. The entry covering spermidine-rich wheat germ extract fixes the authorised name, the 0.8–2.4 mg/g range and an adult-only condition at an intake equivalent to 6 mg a day; an isolate cannot cite it. The buyer's team confirms the member-state route and that the specification matches the article on the market, while contaminant results and the label are checked against the current consolidated text. General food law, contaminant limits and labelling rules apply as well. ## United States The US question is the exact article: a spermidine isolate and a spermidine-rich wheat germ extract are not interchangeable, and the intended use has to match the basis the supplier cites. The supplier points to the supporting document; the buyer confirms that the document covers the finished article and its claim. Label and claim review run separately from the certificate. ## United Kingdom The UK divides at the Irish Sea. Great Britain works to its own register and labelling rules; Northern Ireland stays with the EU framework, so the wheat-germ entry and the isolate route can need different files. The buyer's regulatory contact confirms which side the address sits on and files that note with the order. ## Contaminants and limits The contaminant panel is a finished-product calculation, not only a drum result. The table below is the usual starting point for a food-supplement file; the current destination text and the daily dose decide the final limit. Contaminant limits to confirm for the finished product | Parameter | Typical supplement reference | What the file should show | Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method, limit and the finished-product calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception that applies | Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result and method | Arsenic (As) | Customer or market limit | The agreed limit and the method, stated on the certificate ## Label and claims A spermidine label has to identify the article — isolate or wheat-germ extract — then give the amount per serving and the source in the wording the destination accepts. Wording review is handled outside the certificate: the brand's reviewer tests the claim for that product, form and market. A lot certificate backs the material rather than the claim, and editing the claim leaves the specification untouched. ## Claims for spermidine The source decides which claim file applies. In the EU, as of this review, the novel-food entry for spermidine-rich wheat germ extract carries its own designation, adult-only supplement condition and a daily intake equivalent to 6 mg; an isolate cannot borrow that entry or its wording. Statements about autophagy or cellular renewal are mechanism language, not an authorised claim, and no disease claim is open in the EU, the UK or the US. In the US, a structure/function statement needs substantiation and the DSHEA disclaimer. This site makes no health claim; it publishes the specification and the file. ## Documents for the spermidine file The COA should report the GC and HPLC assay, IR identity, Karl Fischer water, the metal panel, the micro count and a polyamine scan for putrescine and cadaverine with a stated limit of detection. The specification must name the source route — isolate or spermidine-rich wheat germ extract — and, for the extract, the spermidine content in mg/g against the authorised 0.8–2.4 mg/g range. Add the TDS, the SDS, the origin and GMO statements, a gluten and allergen statement for the wheat route, and the residual-solvent statement. The spermidine product page carries the catalogue specification. For this product, the file starts with the catalog specification and the lot certificate. The buyer adds the destination route, the finished-product dose and the label review; the supplier keeps the source, process and pack under change control. ## Checklist before the first order - Specification version, CAS and the exact form are named. - COA, TDS, SDS, allergen, GMO, origin and residual-solvent statements are on file. - The contaminant results are converted to the finished-product dose. - The label and the claim have been reviewed for the destination. - The source, process and pack are under change control. - The quotation, the specification and the certificate refer to the same version. The product page carries the catalog specification; the COA page explains the lot certificate; the identity page covers the analytical evidence. The quality page describes the release file, and the regulatory notes provide the framework references. ### 06 How we prove a spermidine lot is spermidine URL: https://nutrition.rainwoodbio.com/products/specialty/spermidine/identity/ Reviewed: 2026-11-19 Spermidine identity is established in four layers: the form and its CAS, the chromatographic retention in GC and HPLC against a reference, the infrared spectrum, and the composition of everything else in the drum. The assay says how much of a molecule is present; it does not say which molecule, which salt, or whether the powder is an extract. A certificate that reports 99% by one method can still describe the wrong article, which is why the layers are read together. In one lineOne peak at the right retention time is a start; the salt ratio, the IR spectrum and the polyamine profile are what separate spermidine from its neighbours. ## The four layers Identity layers · spermidine | Layer | Question | Evidence | Form | Free base or salt, and which CAS? | Name, CAS, free-base content | Chromatography | Is the main peak spermidine? | GC and HPLC retention against a reference | Spectrum | Are the functional groups right? | IR compared with a reference spectrum | Composition | What else is in the drum? | Water, related polyamines, carrier, mass balance Each layer closes a different question. A retention time can be matched by a homologue under a poorly resolving method. An IR spectrum can be dominated by a carrier. A mass balance can be satisfied by water. Only the four together answer the question the buyer is actually asking. ## The salt-to-base ratio Spermidine is a triamine, and it is sold both as the free base and as a hydrochloride. The free base is CAS 124-20-9 with a molecular mass of about 145.25 g/mol; the trihydrochloride is CAS 334-50-9 at about 254.63 g/mol. Three hydrochloride molecules add about 109 g/mol, so the salt carries 145.25 ÷ 254.63, or 57.0%, of its mass as spermidine. The rest is chloride and proton, not impurity. That fraction is the first arithmetic check on an assay. A trihydrochloride at 98% is 98 × 0.570, or about 55.9% spermidine, and a certificate that prints “99%” without the form has not told the reader whether the powder is a 99% base or a 56% base equivalent. Both can be correct articles; they are not the same order. The name, the CAS and the free-base figure belong on the certificate, and the purchase order should repeat them. Water is the other part of the ratio. At ≤1.0% by Karl Fischer, a base assayed at 98.5% as sold leaves little room for anything else, which is what makes the mass balance useful: assay plus water plus related peaks should account for the powder. A gap of several percent is a question, not a rounding error. ## The solid state: IR first, XRD where it fits For this material the infrared spectrum does more work than diffraction. It shows the N–H and C–H stretching and the amine bending that a polyamine should have, and it does not depend on how the powder was cooled or milled. The spectrum should be run against a reference and retained with the lot record. A report that says “IR conforms” without the spectrum is a conclusion without the evidence behind it. Diffraction earns its place when the question is crystal form or an inorganic diluent. The free base has a low melting point and can be supplied crystalline or as a melt, so a diffraction pattern reflects the thermal history as well as the molecule; a resolidified lot may not match a reference pattern even though the chemistry is unchanged. Use XRD for a defined question, ask for the reference pattern and the detection limit, and a pattern mismatch is not proof of adulteration on its own. ## The routes that put something else in the drum Adulteration routes and the test that catches each | Route | What it looks like | What catches it | Putrescine | Close homologue, C4H12N2, similar amine chemistry | Chromatographic resolution and IR; assay against a reference | Cadaverine | Next homologue, C5H14N2 | The same, with the related-peak section reported | Carbohydrate or salt filler | Lower assay, higher water or ash, poor mass balance | Assay, Karl Fischer, IR, mass balance | Extract sold as isolate | Low spermidine per gram, sugars and other extract solids | Spermidine content, water, IR, related peaks | Salt sold as base | Assay passes, free-base content does not | Form and CAS, free-base calculation, chloride Putrescine and cadaverine matter because they are the nearest neighbours: small diamines with the same reactive amine groups, close enough to co-elute on a method that was not built to separate them. A certificate with one main peak and no resolution data has not shown that they are absent. The method should state the column, the derivatisation or detector, and the limit of quantification for each neighbour. Dilution is the other common route, and it is not always dishonest: a granulated or diluted grade is a legitimate product when it is declared. The failure is a dilution sold under a pure name. The same applies to an extract sold as an isolate: the spermidine figure may be correct while the article is not, and the label, the dose and the regulatory file all change with it. ## What the specification should say - “Spermidine free base, CAS 124-20-9, ≥98.5% by GC or HPLC, with the detector named and the basis stated.” - “Water ≤1.0% by Karl Fischer.” - “Identity: retention matches the reference in GC and HPLC; IR conforms to the reference spectrum.” - “Putrescine and cadaverine: each below the agreed limit, with the method and the limit of quantification stated.” - “No carrier; if diluted or granulated, declare the carrier and the spermidine content per gram.” - “40 mesh, ≥95% through.” Two of those lines carry most of the weight. The form and CAS decide what the assay means, and the related-polyamine limits decide whether the main peak is the whole story. A specification that omits both is a specification for a percentage, not for a material. ## Five questions for the supplier - Which form is this, which CAS, and what is the free-base content per gram? - Which method and which basis produced the 98.5%, and what detector was used? - Does the chromatogram resolve putrescine and cadaverine, and what is the limit of quantification? - Is an IR spectrum on file against a reference, and can it be sent with the lot? - Is there any carrier, diluent or second polyamine source in the drum? Five direct answers amount to an identity file. A single percentage does not. The tests that separate the molecule from its neighbours are set out beside the certificate on the COA page; the source routes are compared on the grade page; the market question is on the compliance page; the infrared method is described in the FTIR note; the spermidine product page carries the catalog specification. ### 01 What the COA for urolithin A actually contains URL: https://nutrition.rainwoodbio.com/products/specialty/urolithin-a/coa/ Reviewed: 2026-11-19 A urolithin A certificate covers appearance, assay by HPLC, identification by HPLC and NMR, loss on drying, residual methanol, the heavy-metal panel, microbiology and particle size. The catalog specification is 98.0–102.0% assay, ≤1.0% loss on drying, methanol ≤3,000 ppm, Pb, As and Cd ≤1 mg/kg, Hg ≤0.1 mg/kg and ≥95% through 40 mesh; the batch COA confirms those figures for a particular lot. In one lineA percentage on the certificate is an assay, not an identity; the lot is released on the method, the spectrum and the solvent result as well. ## Reading a certificate line by line A certificate is only auditable if each line names the test, the method and the limit the lot had to meet. A result without a method cannot be reproduced; a limit without a stated basis cannot be compared between suppliers. The lot number should appear on the certificate, the pack and the retained sample, so the three can be tied together. Identity, assay and purity · urolithin A | Parameter | Method | Release limit | Appearance | Visual | Off-white to yellow powder | Assay | HPLC, external standard | 98.0–102.0% | Identification | HPLC retention and NMR | Conforms to reference | Loss on drying | Gravimetric | ≤1.0% | Residual methanol | Gas chromatography | ≤3,000 ppm | Heavy metals | ICP-MS | Pb ≤1 · As ≤1 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh The table is the catalog specification, not a batch result; the certificate describes the drum that was released. Both belong in the file and should agree on grade, assay basis and pack. ## What the assay measures, and what it does not The assay is a reverse-phase HPLC separation with UV detection and an external standard. The percentage is a ratio: the response of the sample peak against the response of a reference standard of stated purity. The standard decides the calibration, the integration decides how much peak is counted, and the basis — as-is or dried — decides the denominator. An area-normalisation result divides the urolithin A peak by the peaks the method can see. Water, residual solvent and any non-UV-absorbing impurity are outside that sum, so it can look higher than an external-standard assay of the same powder. The certificate should say which was used. The 98.0–102.0% window is a release range, not a claim that the peak is the only UV-active material. The upper bound above 100% is assay uncertainty, not a purity above 100%. NMR is the orthogonal identity check: it shows the proton and carbon skeleton. It is not a purity percentage; a certificate that reports “NMR conforms” without spectra has given a conclusion, not evidence. ## The gate and the measured value The release limit is the boundary the lot had to meet. The batch result is what the laboratory measured on that lot. They belong in separate columns, with the method beside them. A result column that repeats the release range records the gate, not the measurement. Residual methanol is the line most often reported without context. The catalog limit is 3,000 ppm, which is 0.3% of the powder by mass. Methanol is a Class 2 solvent in the ICH Q3C guidance, with a permitted daily exposure of 30 mg/day and a concentration limit of 3,000 ppm. At a 1 g daily intake, 3,000 ppm delivers 3 mg of methanol, one-tenth of that exposure. Loss on drying and the assay basis have to be read together. A powder at 99.5% as-is with 0.8% water leaves little room in the mass balance; the same powder on the dried basis would read higher. The two are not interchangeable. The heavy-metal limits are raw-material limits; the EU supplement ceilings are written for the finished product, and the dose converts one into the other. The compliance page sets out that conversion. ## What changes from lot to lot Assay, loss on drying, methanol and colour move with the synthesis, purification and drying step. Particle size moves with the mill and sieve. A 40 mesh specification is a floor — at least 95% through the sieve — not a fixed distribution, so two passing lots can behave differently in a capsule or blend. Colour is the least quantitative line and often the most informative. The specification allows off-white to yellow, so a yellow lot is not out of specification by itself. A drift towards a deeper yellow across lots can point to heat exposure, a longer drying step or a change in the wash; the batch record explains it better than appearance alone. Look at the direction of three consecutive lots: an assay sliding towards the lower bound, methanol rising, or loss on drying climbing is a stronger signal than one result near a limit. Ask for the last three certificates for the same grade, not one. ## When an outside laboratory earns its place Commission an outside test when the source is new, when a lot is the first into a regulated market, when a result is disputed, or when a purity claim is not proven by the supplier's certificate. The useful panel answers the open question: HPLC assay with a related-substance profile, 1H and 13C NMR, headspace GC for methanol, ICP-MS for the metals and XRD for the solid state. Ask the laboratory to state its detection and quantification limits. A “not detected” line without a limit is evidence about the method, not the sample. The assay report should name the column, the detector, the wavelength and the standard, not only the percentage. An outside laboratory is the referee when a result is contested. Give it the retained sample, the supplier's certificate and the specification. Keep the chain of custody intact: the sample that is tested should be the one that was retained, and the lot code should travel with it. ## Six lines to put side by side Put six lines side by side: assay method and basis; NMR raw data; methanol result and method; loss on drying; particle-size distribution; and lot traceability. If two quotations agree on assay but differ on the other five lines, they may not describe the same material. The second layer is the chain from manufacturer to drum. The certificate should say who manufactured the lot and which purification and drying steps were used. A trader's certificate can be correct and belong to a drum that is not on the loading dock. Match the lot code on the certificate, the pack and the retained sample. The catalog specification sits on the urolithin A product page. The difference between the pure powder and an extract is set out on the grade page, and the tests that separate urolithin A from another urolithin are on the identity page. The release workflow is described on the quality page; the separation itself is explained in the HPLC method note, and the metal panel in the ICP-MS note. ### 02 Pure urolithin A or an extract: choosing a grade URL: https://nutrition.rainwoodbio.com/products/specialty/urolithin-a/grades/ Reviewed: 2026-11-19 The catalog grade is a single substance: urolithin A powder at 98.0–102.0% by HPLC, milled to 40 mesh. The alternative on the market is an extract — either standardized to urolithin A or standardized to pomegranate ellagitannins, which are not urolithin A. The two differ in the mass needed per dose, the label declaration and the regulatory file, so the choice follows the dosage form and the destination market, not the word “natural”. In one lineA grade is a definition of the powder, not a marketing tier: the assay, the carrier and the source decide the dose and the label. ## A grade is a definition, not a number A grade name hides three decisions: the source, the assay and the physical presentation. A 98% figure can describe a purified single substance, a purified extract or a blend assayed on a different basis. The figure narrows the field; it does not say which of the three is in the drum. Two suppliers can both quote “98% urolithin A” and be describing materials with different impurity profiles, different carriers and different regulatory histories. The catalog grade resolves the first two decisions. It is a single substance, not a plant extract, and the assay window is the specification on the product page. The physical variants — granulated on request, dilution on request — change the powder, not the molecule, but they change the fill weight and the label. ## Pure, granulated, diluted or extract Urolithin A grades · what changes in the drum | Grade | What it is | Urolithin A content | Label declaration | Pure powder | Single substance, 40 mesh | 98.0–102.0% by HPLC | Urolithin A | Granulated pure | Agglomerated pure powder | Same assay, stated on the COA | Urolithin A; granulation aid if used | Dilution | Pure powder on a declared carrier | Assay × dilution factor | Urolithin A and the carrier | Extract standardized to urolithin A | Plant-derived material purified to a stated figure | Stated %; requires its own method | Extract name and urolithin A % | Pomegranate extract | Ellagitannin extract, usually standardized to punicalagins | Not the marker; often low or unmeasured | Pomegranate extract and its marker The extract rows are different purchases, not variants of the catalog grade. A pomegranate extract standardized to punicalagins is a distinct ingredient, but it is not a measured dose of urolithin A; the pure versus extract page takes that comparison apart. ## The content conversion The arithmetic is the same for every grade: mass × assay = urolithin A. A 100 mg portion of a 99% powder carries 99 mg. A 500 mg portion of a 20% extract carries 100 mg, if the 20% is a measured urolithin A figure. The multiplication is only as good as the assay behind the percentage and the basis it is reported on. The trap is the extract that is standardized to something else. Pomegranate extracts are commonly standardized to punicalagins or ellagic acid, both ellagitannins. Those are not urolithin A, and no multiplication turns a punicalagin figure into a urolithin A dose. The gut microbiota converts ellagitannins into urolithins, but that conversion is not a 1:1 arithmetic step and cannot be used to declare a urolithin A amount in a supplement panel. If the label promises urolithin A, the material has to be assayed for urolithin A. ## What the powder does on the line The pure grade is a 40 mesh powder, off-white to yellow, free-flowing, sparingly soluble in water. Granulation changes flow and density without changing the assay; it suits a tablet press or sachet line that struggles with a fine powder. Dilution lowers the assay and adds a carrier, which must be named on the label and in the specification. Neither step improves the molecule; each solves a handling problem. An extract brings the physical character of its source. It may be finer, more hygroscopic, darker or more variable in taste, and it usually carries a carrier from spray-drying. Those are not defects, but they change the fill weight, the flow, the dispersion and the stability of the finished product. A formulator who switches from pure powder to an extract is reformulating, not just re-sourcing. ## What changes in the capsule or tablet In a capsule, the fill weight is the constraint. A pure grade at 99% delivers almost its own mass as urolithin A; an extract at 20% needs five times the powder for the same amount, which may not fit the capsule or may push out another ingredient. The label dose should set the fill weight, not the other way round. Tablets add flow, density and compression. A granulated pure grade can run where a fine powder would not; an extract with a carrier may compress differently. In a stick pack or a drink mix, dispersion, colour and taste outweigh the last decimal of assay. A dilution can distribute a small dose evenly through a large sachet, but the carrier becomes part of the formula and the label. The dose is a separate decision: the specification describes the material, not a daily intake. Whatever the dose, the mass of powder on the label has to match the assay of the lot used. ## What the panel can declare In the EU, the ingredient list names the source as it appears in the applicable rule. “Urolithin A” and “pomegranate extract” are different declarations, and a pomegranate extract cannot be presented as a measured amount of urolithin A. If the substance is a novel food, the authorised name and conditions, where they exist, decide the wording; the compliance page maps that by market. In the US, the Supplement Facts panel declares urolithin A in milligrams, while the ingredient list names the extract or powder and its standardization. A panel that declares urolithin A from a punicalagin-standardized extract is declaring a substance the material does not contain at that level. In both markets the test is the same: is the panel number the amount of the substance named in the ingredient list? ## Clauses that make the grade testable - “Urolithin A, 98.0–102.0% by HPLC, external standard, basis stated.” - “Identification by HPLC retention and NMR; loss on drying ≤1.0%; methanol ≤3,000 ppm.” - “Pb ≤1 · As ≤1 · Cd ≤1 · Hg ≤0.1 mg/kg; ≥95% through 40 mesh.” - “No carrier” for the pure grade; for a dilution, the carrier, the dilution factor and the assay basis. - For an extract, the plant source, the marker or markers, the urolithin A figure and its method. A specification that names only “urolithin A 98%” leaves the source, the carrier and the basis open. Those three decide what the certificate means and what the label can print. A switch of grade is a revalidation: fill weight, flow, stability and label move, and the new lot needs its own certificate. The parameters behind these clauses are on the COA page; the identity tests are on the identity page; the pack and lead time are on the MOQ page. The assay itself is described in the HPLC method note. ### 02.1 Pure urolithin A vs a pomegranate extract: dose, purity and the label URL: https://nutrition.rainwoodbio.com/products/specialty/urolithin-a/grades/pure-vs-extract/ Reviewed: 2026-11-19 Pure urolithin A is a single substance at 98.0–102.0% by HPLC; a pomegranate extract is a mixture standardized to ellagitannins such as punicalagins, not to urolithin A. The two are not interchangeable by mass: 500 mg of extract is not 500 mg of urolithin A, and the label has to state which material is in the capsule. The choice follows the dose, the dosage form and the market file. In one lineA pomegranate extract delivers pomegranate compounds, not a measured dose of urolithin A; the label has to say which one is in the capsule. ## Two sources, two materials Pure urolithin A is a synthetic single molecule: CAS 1143-70-0, C13H8O4, off-white to yellow powder, 40 mesh, assayed at 98.0–102.0% by HPLC. The catalog grade is this material. It has one active substance to declare, one assay to report and one impurity profile to review. A pomegranate extract is a different object. It is made from the fruit or the peel and standardized to ellagitannins, usually punicalagins or ellagic acid. Urolithin A is a metabolite produced when ellagitannins are broken down, not a major constituent of the fruit. Unless an extract has been fermented or fortified, its urolithin A content is low or not measured, and the marker on the certificate is a punicalagin figure, not a urolithin A figure. Two materials · what the certificate measures | Material | Standardization marker | Urolithin A content | Label unit | Pure urolithin A | Urolithin A by HPLC | 98.0–102.0% | mg urolithin A | Pomegranate extract | Punicalagins or ellagic acid | Low or not measured; requires its own assay | mg extract and mg marker | Fermented or fortified extract | Urolithin A, if claimed | Stated %; requires its own method | mg extract and mg urolithin A ## The content conversion The arithmetic is the same for both materials: mass × assay = the amount of the declared substance. A 100 mg portion of a 99% pure powder carries 99 mg of urolithin A. A 500 mg portion of a 20% urolithin A extract carries 100 mg, if the 20% is a measured urolithin A figure. The multiplication is only as good as the assay and the basis behind the percentage. The trap is the punicalagin extract. A 500 mg portion standardized to 40% punicalagins carries 200 mg of punicalagins, not 200 mg of urolithin A. The gut microbiota converts ellagitannins into urolithins, but that conversion is not a 1:1 arithmetic step and cannot be used to declare a urolithin A amount in a supplement panel. If the label promises urolithin A, the material must be assayed for urolithin A, and the dose must be calculated from that result. ## What purity means for each For the pure grade, purity is the main peak by HPLC, backed by the related-substance profile, loss on drying, residual methanol and the metal panel. A 99% figure does not mean the absence of every impurity; it means the main peak accounts for 99% of the response the method can see. The COA page sets out the full panel. For an extract, purity is a statement about the marker, not about the plant. A “98% extract” is a purified substance with an extract-derived impurity profile; a “40% punicalagin extract” is a mixture in which urolithin A may be absent. The grade name does not tell you which of these is in the drum. The assay method and the marker list do. The identity page explains how the tests separate the possibilities. ## What the label can declare In the EU, the ingredient list names the source. “Urolithin A” and “pomegranate extract” are different declarations, and a pomegranate extract cannot be presented as a measured amount of urolithin A. If the material is a novel food, the authorised name and conditions, where they exist, decide the wording. A carrier in a dilution belongs in the list as well. In the US, the Supplement Facts panel declares urolithin A in milligrams, while the ingredient list names the extract or the powder and its standardization. A panel that declares urolithin A from a punicalagin-standardized extract is declaring a substance the material does not contain at that level. In both markets the test is the same: is the number in the panel the amount of the substance named in the ingredient list? ## The regulatory question follows the substance Pure urolithin A is regulated as a novel food in the EU and the UK; the application and register status has to be checked for the destination, and a pending application is not an authorisation. In the US, the basis is a GRAS notice, an NDI notification or a pre-DSHEA history for the exact material and use. The compliance page maps those routes. A pomegranate extract may have a different history as a food, but the source does not settle the question. If the finished product claims urolithin A, the regulatory object is the substance being placed on the market and the claim on the label, not the fruit it came from. A supplier's statement that the extract is “natural” is not a permission for a urolithin A dose. ## Matching the material to the brief Choosing a material · by need, not by label fashion | If the requirement is | The material | Why | A precise urolithin A dose in a small capsule | Pure urolithin A | 98.0–102.0% leaves little room for a carrier | A pomegranate-polyphenol positioning | Pomegranate extract | The marker is punicalagin, not urolithin A | A urolithin A dose from a plant-derived material | Extract with a measured urolithin A figure | The assay, not the source, sets the dose | A single-substance regulatory file | Pure urolithin A | The substance and the specification match If the label promises urolithin A and the material is a punicalagin extract, the answer is to reformulate or to relabel; there is no arithmetic that closes the gap. Switching material is a revalidation: a new certificate, a new label, a new stability file and possibly a new regulatory route. The grade page places the choice in the wider range, the stability page covers the matrix, and the product hub carries the catalog specification. ### 03 Urolithin A is light-sensitive; the pack and the matrix decide the shelf life URL: https://nutrition.rainwoodbio.com/products/specialty/urolithin-a/stability/ Reviewed: 2026-11-19 Urolithin A is a light-sensitive phenolic lactone, and its shelf life is set by the pack and the matrix as much as by the molecule. A sealed 1 kg foil pouch or 25 kg fiber drum keeps the powder dry and dark; a stick pack, a suspension, a tablet or a gummy exposes it to light, oxygen, moisture and pH. The catalog specification does not carry a shelf life. The stability file for the pack and the matrix does. In one lineThe molecule is stable enough in a sealed, dark pack; the shelf life is lost at the interfaces — light, moisture, oxygen and matrix pH. ## The powder in its pack In the dry state, low water activity and a dark pack are the two protections. The catalog limits — loss on drying ≤1.0%, off-white to yellow powder, ≥95% through 40 mesh — describe the starting point, not the storage condition. A foil pouch with a heat seal keeps moisture and light out; a fiber drum with a liner does the same at 25 kg scale. The closure is part of the barrier: a drum that is opened and resealed in a humid room is no longer the pack that was qualified. Storage belongs in the specification as a sentence, not a footnote: keep the pack sealed, cool, dry and protected from light. A clear container on a sunlit shelf is the opposite of that condition, even if the powder inside still passes assay at the start. The pack and the storage statement are the first two lines of the stability file. ## Suspensions and drink mixes Urolithin A is sparingly soluble in water; a drink mix is usually a dispersion, not a true solution. That changes the failure modes. A dispersion can settle, re-disperse unevenly and expose a large surface to dissolved oxygen. In a clear bottle, light reaches the particles directly. The pH of the drink, the temperature of the process and the time between mixing and drinking all belong in the test plan. The lactone ring is the pH-sensitive part of the molecule. At high pH the ring can open, and the open form has different solubility and different chromatographic behaviour. That is a risk to test in the intended matrix, not a reason to avoid every beverage. Test the finished drink at its real pH, in its real pack, for assay and appearance over the intended shelf life. A result from the powder alone does not answer the question. ## What shortens the shelf life Stability factors · what to test in the pack and in the matrix | Factor | What it can change | Test | Light | Colour shift, assay loss | Photostability in the proposed pack | Heat | Assay loss, colour, related substances | Accelerated temperature condition | Oxygen | Oxidation of the phenolic groups | Sealed versus open pack; headspace | Moisture | Caking, loss on drying, hydrolysis | Humidity challenge; water activity | pH | Lactone ring, solubility, dispersion | Assay across the matrix pH range | Matrix | Water activity, carrier, other ingredients | Finished-product stability Light and moisture are the two factors the pack can control directly. Heat and oxygen are controlled by the process and the headspace. pH and matrix are formulation decisions. A stability failure usually belongs to one of these six lines, and the first step is to identify which one moved. ## A stability protocol A workable protocol is modelled on ICH Q1A(R2): long-term storage at 25 °C and 60% relative humidity, an intermediate condition at 30 °C and 65% relative humidity, and an accelerated condition at 40 °C and 75% relative humidity. Photostability follows the option in ICH Q1B that exposes the sample in the proposed pack. These are drug-substance conventions borrowed for an ingredient; they are a sensible starting grid, not a legal requirement for a food ingredient. Test at 0, 3, 6, 9, 12, 24 and 36 months, and at the accelerated timepoints the protocol defines. The panel should include assay, related substances, loss on drying, appearance, particle size where flow matters, and microbiology at the end of the period. Use the proposed pack, filled to the proposed net weight, because a 20 g sample in a 1 kg pouch tests a different headspace-to-product ratio. One production batch is a start; three batches give a trend. Bracketing by pack size is acceptable when the smaller and larger packs share the same materials and the same seal. A protocol is a plan, not a result: it does not become a shelf life until the timepoints have been read and the trend has been evaluated against the specification. ## The matrix decides more than the molecule A capsule is a low-water-activity environment, but the shell can donate or pick up moisture, and a two-piece capsule is not a hermetic pack. A tablet adds compression heat, a lubricant and a binder; a granulated pure grade may run better than a fine powder, but the granulation aid becomes part of the matrix. A stick pack has a large surface-to-volume ratio and a foil laminate that must be chosen for light and moisture, not only for print. A gummy is the hardest matrix: water activity, pH, heat and the sugar system all interact, and the dosage form itself may limit how much powder can be carried. A suspension adds settling, preservative and a clear or translucent pack. In each case the question is the same: what does the assay read after the matrix has been through its own process, and what does it read at the end of the intended shelf life? ## Assigning the shelf life A shelf life is a conclusion from data, not a property of the molecule. It belongs to a pack, a matrix and a storage condition. The catalog does not state one, and a supplier should not print a number that its stability file does not back. If the file covers 24 months in the 1 kg pouch, that figure does not automatically transfer to a 25 kg drum, a stick pack or a gummy. Decide between a retest period and an expiry date. A retest period suits a raw material that is assayed before use; an expiry date suits a finished product that cannot be re-tested. Write the storage statement on the label, and keep the transport excursion in the file: a container left on a dock in summer is a stability event even if the certificate was issued in winter. The packaging options are on the MOQ page; the parameters that move during storage are on the COA page; the destination-market label rules are on the compliance page. The quality page shows how the stability file joins the lot file, and the product hub carries the catalog specification. ### 04 Urolithin A: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/specialty/urolithin-a/moq/ Reviewed: 2026-11-19 The minimum order is 1 kg, supplied as a 1 kg foil pouch or a 25 kg fiber drum, with a lead time of 1–7 days for a released lot. The 1 kg unit is the qualification unit: enough to run identity, assay and formulation trials from one lot, and small enough to keep a retained sample. A quotation depends on grade, quantity, destination, intended use, documents and delivery date. In one lineOne kilogram is the smallest unit that lets a buyer test the material and the paperwork before committing to a drum. ## Why the minimum is 1 kg A 1 kg pack is large enough to be drawn from a production lot and small enough to be a qualification purchase. It covers analytical repeats, a formulation trial and a retained sample without forcing the buyer to commit to 25 kg of a material that has not yet been through their own review. The same lot number should appear on the pouch, the certificate and the retained sample, so the trial is traceable back to the batch record. The minimum is not a retail pack. It is the smallest unit that carries a full lot file. A buyer who expects to use 25 kg per month should still qualify on 1 kg, then release the drum against the same specification and a new certificate. Starting with a drum skips the step where most problems are found. ## The packs Standard packs · urolithin A | Pack | Net weight | Format | Typical use | Watch | Foil pouch | 1 kg | Heat-sealed aluminum foil | Qualification, small runs, retained sample | Reseal after opening; light and moisture barrier | Fiber drum | 25 kg | Lined fiber drum | Production | Liner integrity, closure, humidity at opening The pack is part of the specification, not a shipping detail. A foil pouch is chosen for its light and moisture barrier; a fiber drum needs an intact liner and a closure that survives transport. The label on each pack should carry the product, the grade, the lot number, the net weight and the storage statement. A drum without a lot label is a drum without a file. ## From order to dispatch The 1–7 day figure applies to a released lot in the standard pack. Granulation and dilution are made-to-order formats and add time before the lot can be released. Documents can also hold an order: an NMR spectrum, a solvent result or a destination-specific declaration may be requested after the material is ready. Read the lead time as the interval to dispatch, not to delivery. Freight, customs and the destination's import requirements sit outside it. Once a purchase order is placed, ask for a ship date rather than a range, and ask which documents travel with the pack. If the destination market needs a regulatory review before the order can proceed, that review should start before the material is booked. ## What a quotation needs Six details turn an enquiry into a quotation that can be compared: - The product and grade: pure urolithin A powder, granulated or diluted, with the assay and particle size. - The quantity and pack: number of 1 kg pouches, 25 kg drums or a mix. - The destination: country and, where relevant, the port. This decides the regulatory and shipping questions. - The intended use and dosage form: capsule, tablet, stick pack or drink mix, and the market it will be sold in. - The documents required: COA, TDS, SDS, NMR and HPLC data, residual-solvent result, allergen, GMO and origin statements. - The required delivery date and the Incoterm. A quotation that omits the grade, the pack or the destination is not comparable with another. The reply should state the assay basis, the pack, the lot availability, the lead time and the document set. The regulatory question is part of the quotation, not a surprise after the order: the compliance page sets out what the destination file must show. ## Drawing a sample Ask whether the sample is drawn from the lot that will be offered, and ask for that lot's certificate. A sample from a different batch is a demonstration, not a qualification. The 1 kg pouch is the smallest standard pack, so a smaller sample is a deliberate exception; it should still carry the lot code and enough material for an assay in duplicate plus a retain. Test the sample against the specification before the first order: assay, identity, loss on drying, methanol and particle size at minimum. Keep part of it as the retained sample, and compare it with the commercial pack when it arrives. The COA page lists the parameters and the methods behind them. ## Terms to settle before the order The purchase order should name the specification, not only the product. Attach the assay basis, the grade, the pack and the document set; state the acceptance window and the remedy for a lot that fails it. Agree the Incoterm, the payment terms and the point at which title and risk pass. Those are commercial terms, and they belong in writing before the drum is booked. Quality terms matter as much as commercial ones. Ask for a certificate per lot, a retained sample held for an agreed period, and a change-control notification if the process, the source or the pack changes. If the material is re-tested rather than assigned an expiry date, the retest interval and the storage condition belong in the specification. The stability page explains why the pack and the matrix decide that interval. The catalog specification is on the product hub. Packing and dispatch are described on the logistics page; the definitions of minimum order, lead time and retained sample are in the MOQ, lead time and retained sample notes. ### 05 The regulatory file for Urolithin A URL: https://nutrition.rainwoodbio.com/products/specialty/urolithin-a/compliance/ Reviewed: 2026-11-19 Urolithin A is supplied as urolithin A powder, CAS 1143-70-0. The catalog specification is the starting point; the regulatory file is built around the exact material, the destination and the finished-product route. The buyer's regulatory team confirms that route. This page lists the documents and checks that belong in the file, so the specification and the commercial pack can be reviewed together. In one lineThe specification describes the material; the regulatory file shows the route, the limits and the label for the destination. ## What the file contains Four records make the urolithin A file usable. The specification names the article and its version; the certificate reports the lot; the destination supplies the limits and the label rules; the change history covers source, process and pack. Read them as three different documents — lot certificate, specification sheet, safety sheet — and the route question is still open. It is the one the buyer's regulatory team has to write down. Urolithin A needs more than the certificate: an allergen declaration, a GMO statement, the origin record, the residual-solvent statement and any customer-specific note. Because the article may be a pure powder or a pomegranate-derived extract, the origin record has to name which one is being shipped. Where a statement is missing for the lot, flag it before the order; a versioned list is more useful than a folder of undated files. ## European Union On the EU side, urolithin A is checked as the article placed on the market, not as a fruit extract by association. The file pairs the specification and contaminant results with the label, and the importer's regulatory team settles the member-state route, then checks the specification against the article on sale. Where a novel-food entry exists, its authorised name and conditions are read from the current consolidated text, not a summary; food-law, labelling and contaminant obligations sit on top. ## United States For the US, the urolithin A file turns on the exact dietary ingredient and its intended use. The supplier names the basis — a GRAS notice, an NDI notification or a pre-DSHEA record — and identifies the document; the buyer checks that it reaches the formulated product and its claim. Label review and claim review are separate from the certificate. ## United Kingdom The UK splits into two regimes. Great Britain keeps a separate register and separate labelling rules; Northern Ireland remains under the EU framework. Which regime applies follows from the shipping address, and that determination is written into the order file so the label and any cited entry can be re-checked. ## Contaminants and limits The contaminant panel is a finished-product calculation, not only a drum result. The table below is the usual starting point for a food-supplement file; the current destination text and the daily dose decide the final limit. Contaminant limits to confirm for the finished product | Parameter | Typical supplement reference | What the file should show | Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method, limit and the finished-product calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception that applies | Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result and method | Arsenic (As) | Customer or market limit | The agreed limit and the method, stated on the certificate ## Label and claims The urolithin A name has to identify the article, its amount per serving and where it comes from, using the wording the destination accepts; a pure powder and a pomegranate extract cannot share that text. Claim review sits with the brand's reviewer. A certificate supports the material, never the claim, and a new claim does not reopen the specification. ## Claims for urolithin A The claim follows the substance, not the fruit. Pure urolithin A and a pomegranate extract are different articles, and a statement written for one cannot be carried by the other. As of this review, the EU and UK novel-food entry, where it exists, fixes the authorised name, the conditions of use and the permitted wording; in the US, a structure/function statement needs substantiation and the DSHEA disclaimer. No disease claim is open in either market, and a mechanism word such as mitophagy does not turn a mechanism into an authorised claim. This site publishes the specification and makes no health claim. ## Documents for the urolithin A file The lot file needs the COA with the HPLC assay, 1H and 13C NMR identity, headspace GC for methanol, the metal panel and the micro count. The specification must say whether the article is pure urolithin A or an extract, and state the assay basis in mg/g or %. Add the source description, the TDS, the SDS, allergen and GMO statements, and the residual-solvent statement. For the EU and UK, attach the novel-food status and the authorised name; for the US, the GRAS notice, NDI notification or pre-DSHEA basis for the material. The product hub carries the catalogue specification. For this product, the file starts with the catalog specification and the lot certificate. The buyer adds the destination route, the finished-product dose and the label review; the supplier keeps the source, process and pack under change control. ## Checklist before the first order - Specification version, CAS and the exact form are named. - COA, TDS, SDS, allergen, GMO, origin and residual-solvent statements are on file. - The contaminant results are converted to the finished-product dose. - The label and the claim have been reviewed for the destination. - The source, process and pack are under change control. - The quotation, the specification and the certificate refer to the same version. The product page carries the catalog specification; the COA page explains the lot certificate; the identity page covers the analytical evidence. The quality page describes the release file, and the regulatory notes provide the framework references. ### 06 How we prove a urolithin A lot is urolithin A URL: https://nutrition.rainwoodbio.com/products/specialty/urolithin-a/identity/ Reviewed: 2026-11-19 Identity is established in layers: HPLC retention against a reference standard, the NMR spectrum against a reference, the assay and related-substance profile, the residual-solvent result and the solid-state data. No single figure proves the molecule; the certificate has to show the method and the raw data behind each layer. The catalog identification is “HPLC and NMR conform”, which is a conclusion the buyer should be able to audit. In one lineA retention time can be matched by another urolithin; the NMR spectrum and the impurity profile are what make the name defensible. ## Four independent layers Identity layers · urolithin A | Layer | Question | Test | What it cannot show | Structure | Is this urolithin A? | HPLC retention and 1H/13C NMR | Purity; a related urolithin with a similar retention | Purity | What else is in the powder? | Assay, related substances, loss on drying | Whether the main peak is the named molecule | Residue | What solvent or metal is left? | Headspace GC for methanol; ICP-MS for metals | The identity of the main peak | Solid form | Crystalline, milled or diluted? | XRD, particle size | The molecular structure The layers are independent on purpose. A lot can pass the assay and still carry a related urolithin that responds at the same wavelength, because the assay measures the main peak and not the family. A lot can pass the NMR and still be diluted, because the spectrum sees the molecule and not how much of the powder it represents. The certificate needs all four, or the file has a gap. ## The assay ratio and the spectrum behind it The assay is a ratio of the sample response to a reference standard of stated purity. On a reverse-phase column with UV detection, urolithin A elutes as a peak and the integrator converts peak area to a percentage against the calibration. The number is only as good as the standard, the baseline and the stated basis. Area normalisation divides the main peak by the peaks the method can see; it is not an external-standard assay and cannot see water or a non-UV impurity. The related-substance profile is where the assay becomes an identity argument. Other urolithins — B, C and D — share the dibenzopyranone core and can sit close to the main peak. Ellagic acid can appear in an extract-derived material. The certificate should name the related substances it looked for, the limit for each, and the limit for unspecified impurities. A 99% main peak with an unlisted shoulder is not a clean file. NMR is the orthogonal check. A 1H spectrum shows the aromatic and phenolic protons; a 13C spectrum shows the lactone carbonyl and the ring carbons. The report should name the solvent, show the reference spectrum and state the match. Integration is consistent with the assignment but is not a purity assay. NMR and HPLC answer different questions. ## Residual methanol Methanol is the solvent the specification names, with a limit of 3,000 ppm. The test is headspace gas chromatography: the sample is heated in a sealed vial and the vapour is measured against a calibration. The result belongs on the certificate with its method, because a limit without a method cannot be compared with another laboratory's result. The number has a context. Methanol is a Class 2 solvent in ICH Q3C, with a permitted daily exposure of 30 mg/day and a concentration limit of 3,000 ppm. At a 1 g daily intake, 3,000 ppm delivers 3 mg, one-tenth of that exposure. Loss on drying is not a solvent result: it measures water and other volatiles by mass, and a powder can pass the loss-on-drying limit while still carrying methanol. Ask for both. ## What diffraction can and cannot show X-ray diffraction sees the arrangement of molecules in a solid, not the molecule itself. A pure crystalline lot gives a sharp pattern; a powder diluted on an amorphous carrier gives a broad halo; a crystalline diluent adds its own peaks. XRD is therefore a check on solid form and dilution, provided the report states its detection limit. XRD cannot prove that the main peak is urolithin A. A different crystalline compound would pass a careless comparison, and an amorphous form of the same molecule would fail a sharp-pattern expectation. Milling can also broaden the peaks: a milled powder may diffract less sharply than a coarse crystal, and broadening is not adulteration. Read XRD next to particle size and NMR. ## Where substitution hides Adulteration routes and the tests that show them | Route | How it shows | Test | Another urolithin | Extra HPLC peaks, extra NMR signals | Related substances; 1H and 13C NMR | Ellagic acid or pomegranate extract | Ellagic acid peak, low urolithin A assay, colour | HPLC, assay, NMR | Dilution on a carrier | Assay below the label, amorphous halo | Assay, XRD, label check | Substitution with another chromone | NMR mismatch, retention may still be close | NMR; mass spectrometry as referee | Solvent residue above limit | GC result above 3,000 ppm | Headspace GC Each route defeats a different check. Another urolithin can pass a retention-time match and fail the NMR; a dilution can pass the NMR and fail the assay; a solvent residue can pass every identity test and fail the specification. The reliable check is the combination, and the certificate should let the reader see which test covers which route. ## Clauses that make identity testable - “Urolithin A (3,8-dihydroxy-6H-dibenzo[b,d]pyran-6-one), 98.0–102.0% by HPLC, external standard, basis stated.” - “Identification: HPLC retention and 1H/13C NMR conform to reference; spectra available on request.” - “Loss on drying ≤1.0%; methanol ≤3,000 ppm by headspace GC.” - “Pb ≤1 · As ≤1 · Cd ≤1 · Hg ≤0.1 mg/kg; ≥95% through 40 mesh.” - “Related substances: limits for other urolithins and ellagic acid, plus a limit for unspecified impurities.” - “No carrier” for the pure grade; a dilution needs its own specification and label. Every clause maps to a certificate row. A specification that says only “urolithin A 98%” leaves the standard, the basis, the related substances and the carrier open, and those are the four places where two materials with the same headline figure differ. ## Five questions to ask - Is the assay by external standard or area normalisation, and is it reported as-is or on the dried basis? - Can you provide the 1H and 13C NMR spectra, with the solvent and the reference spectrum? - What is the related-substance profile, including other urolithins and ellagic acid? - What is the methanol result by headspace GC, and what is the loss on drying? - Is the material crystalline, milled or diluted, and what does XRD show with its detection limit? Five direct answers, backed by the certificate and the raw data, turn a name on a purchase order into a material that can be defended. The COA page shows where each answer appears; the grade page covers pure and extract forms; the compliance page covers the destination file. The product hub carries the catalog specification, and the HPLC and ICP-MS notes explain the methods. ### 01 What the COA for Alpha-GPC actually contains URL: https://nutrition.rainwoodbio.com/products/specialty/alpha-gpc/coa/ Reviewed: 2026-11-19 An Alpha-GPC certificate is a lot-specific test report: appearance, HPLC identification, assay in the 85.0–90.0% window, a choline figure tied to the alpha-GPC content, water at or below 3.0%, heavy metals and microbiology. For each line, the reader needs the method, the acceptance limit and the measured value. The catalog limits define the gate; the batch certificate is the evidence that a particular pack passed it, and a certificate without results is only a copy of the specification. In one lineThe assay, the choline figure and the water limit only mean something together, with the method and the basis printed beside each one. ## A certificate that can be audited Every parameter should be readable in three columns: the test itself, the method behind the value, and the acceptance limit the lot had to meet. “Conforms” alone is a conclusion the reader cannot check. So is a result column that simply repeats the specification range. The identity and choline lines deserve the closest reading, because together they say what the powder is and how much choline the label can claim. The assay measures alpha-GPC; the choline figure measures a part of it. They are related, but they answer different questions, and a certificate should not present one as a substitute for the other. Identity, assay, choline and water · Alpha-GPC 85% grade | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | HPLC retention against an L-alpha-GPC reference | Matches the reference | Water | Karl Fischer | ≤3.0% | Assay | HPLC; detector and reference stated | 85.0–90.0% | Choline | HPLC or enzymatic; method stated | 40.0–45.0% of the alpha-GPC content | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count; enrichment for absence | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent ## The assay basis, the choline denominator and the detector Two figures on this certificate need a qualifier before they can be compared. The assay sits in a five-point window, and water may be as high as 3.0%. If the assay is released on the dried basis, the as-is content of a lot at 85.0% is about 82.5%, and a lot at 90.0% is about 87.3%. The certificate should print “as-is” or “anhydrous” next to the assay, because the weigh-up and the label use the as-is number. The choline figure needs its denominator. The catalog range of 40.0–45.0% is read against the alpha-GPC content; the theoretical share is 40.5%, from a choline unit of 104.17 g/mol inside a molecule of 257.22 g/mol. Measured against the whole powder, the same lot would sit near 34–37%. Neither number is wrong, but a buyer who compares them without noticing the denominator will misstate the nutrient by roughly a sixth. Alpha-GPC does not absorb strongly in the ultraviolet, so the assay detector is part of the method: refractive index, evaporative light scattering, mass spectrometry or a derivatisation step are the usual choices. “HPLC” by itself says nothing about which. The method should also name the column, the mobile phase and the reference standard, and the laboratory should be able to supply the chromatogram behind the percentage. ## The release limit and the measured result The limit is the line the lot had to clear; the result is the number the laboratory obtained. Keep them in separate columns with the method visible, or the certificate blends the requirement with the measurement. A result column that repeats the range is not evidence of anything. How the result column should read | Test | Acceptance limit | Measured result | Assay | 85.0–90.0% with the basis | A measured percentage, the basis and the method | Choline | 40.0–45.0% of the alpha-GPC content | A measured figure and the denominator | Water | ≤3.0% | A Karl Fischer result | Heavy metals | Per element | A figure in mg/kg for lead, arsenic, cadmium and mercury | Microbiology | Counts; absence tests | The plate count and the absence result A pass statement is only as good as the numbers under it. A water result close to 3.0% leaves almost no headroom for a humid warehouse. A choline result at the top of its window beside an assay at the bottom deserves a second look: if the molecule is intact, the two should stay in proportion. ## Batch-to-batch variation The source route, the carrier ratio and the drying step all move the water, the assay and the colour. An 85% grade is a formulated powder, not a pure crystal: the alpha-GPC content sits in a window, and the balance is carrier, related substances and residual water. A change in carrier or in the drying endpoint can move the assay by several points while the alpha-GPC itself is unchanged. Hydrolysis shows up in the choline figure. Water and heat split the phosphate ester, free choline rises and the alpha-GPC assay falls. A lot with normal water but a high choline result, or an assay at the bottom of its window, is worth a chromatographic check for a hydrolysis product. Colour is a weaker signal; white to off-white covers a range, and a slight shift is not an identity failure. Record the lot code on the certificate, the pouch and the retained sample. Compare the last three lots on assay, water and choline before approving a new source; one result at an edge says less than a trend. ## Independent testing: when it earns its place Outside testing earns its place for a new source, for the first shipment into a regulated market, for a grade claim the certificate does not support, or for a contested result. The panel should not simply repeat the supplier's certificate. Ask for HPLC identity and assay with the detector named, water by Karl Fischer, an independent choline method, phosphorus by ICP-OES, the heavy-metal panel by ICP-MS and microbiology. Add specific rotation or chiral HPLC when the L configuration is in question, and a residual-solvent screen where the route uses solvents. Every screen should come with its detection limit; “not detected” without a limit says more about the method than about the powder. Keep the chain of custody intact: the portion tested should be the portion retained, and the report should name the lot. ## Comparing two suppliers Set out seven lines: grade and CAS number; assay and basis; choline figure and denominator; water; heavy metals and microbiology; source and allergen statement; pack and lot code. If two quotes match on assay but split on basis or choline denominator, they are not quoting the same material. Traceability is the second layer: who made the lot, from which source, and through which drying and packing steps. Catalog limits are on the Alpha-GPC product page; the grades page compares the two specifications; the identity page covers the L-form evidence; the HPLC note describes the separation; the quality page covers release. The citicoline page covers the other choline-containing specialty ingredient. ### 02 Alpha-GPC 85% and 50%: two grades, two fill weights URL: https://nutrition.rainwoodbio.com/products/specialty/alpha-gpc/grades/ Reviewed: 2026-11-19 The catalog grade is an 85% Alpha-GPC powder: assay 85.0–90.0% by HPLC, choline 40.0–45.0% of the alpha-GPC content, water ≤3.0%. A 50% grade is a different specification, not the same powder cut in half: it carries more carrier, has its own assay and water limits, and needs about 1.7 times the fill weight for the same alpha-GPC dose. The grade belongs in the purchase order, the specification and the label review. In one lineThe 50% and 85% grades are different specifications, and the difference is measured in carrier, water and the fill weight that carries the same alpha-GPC dose. ## Why the grade is a specification Alpha-GPC is deliquescent. A concentrated powder picks up water quickly, sticks to screens and punches, and can turn from a free-flowing solid into a syrup on a humid bench. A lower-potency grade carries more carrier, which dilutes the active and can improve flow and weighing; a higher-potency grade keeps the fill weight down and puts less carrier into the capsule. Neither is a better grade in the abstract. Each is a different specification with its own assay window, water limit, bulk density and label arithmetic. “Alpha-GPC 50%” and “Alpha-GPC 85%” are therefore not interchangeable pack sizes. A purchase order that names only “Alpha-GPC” has not chosen one, and a certificate written for one grade does not release the other. ## 50% and 85% compared What changes between the 50% and 85% grades | Property | 85% grade (catalog) | 50% grade | Alpha-GPC content | 85.0–90.0% by HPLC | A lower range, set by its own specification | Carrier share | Lower | Higher | Water | ≤3.0% | A separate limit, set by its own specification | Powder character | White to off-white, hygroscopic | More carrier; flow depends on the carrier | Fill for 300 mg alpha-GPC | About 353 mg | About 600 mg | Choline from that fill | About 122 mg | About 122 mg | Typical use | Capsules, tablets and concentrated sticks | Blends with a larger fill and easier weighing The arithmetic in the table uses the bottom of the 85% assay window and the nominal 50%. A real fill uses the measured as-is assay from the COA, so the numbers move by a few per cent. The point is the ratio: the 50% grade needs about 1.7 times the powder, and the choline delivered is the same when the alpha-GPC dose is the same. ## Water, flow and the powder in the room The 3.0% water limit is a release criterion, not a handling allowance. An open pouch in a humid dose room takes up water; the powder becomes tacky, bridges in the feeder and picks up weight on the balance. The as-is assay falls even though the dry alpha-GPC is unchanged. A grade with more carrier can be easier to handle, but the carrier also holds water, so the water limit and the in-use window still decide. Particle size and bulk density are not printed in the catalog for this product. They are agreed separately when the dosage form needs a specific flow or fill. Ask for the sieve and the bulk density on the lot you will run, and test the powder on the actual press or encapsulator rather than on a datasheet. A granulated format is available on request, and it is a different particle specification, not a packing choice. ## Fill weight from the alpha-GPC figure Work from the alpha-GPC figure, not the powder weight. A 300 mg alpha-GPC dose needs about 353 mg of an 85% powder or about 600 mg of a 50% powder. The choline delivered is the same in both cases, about 122 mg, because it is the same alpha-GPC dose. A 500 mg capsule filled with the 85% grade carries about 425 mg of alpha-GPC and about 172 mg of choline; the same capsule filled with the 50% grade carries about 250 mg of alpha-GPC, which is a different product. The assay window also matters. A 353 mg fill at 85.0% carries 300 mg; the same fill at 90.0% carries about 318 mg. The label declares one number, so the fill weight and the assay specification have to be set together. Use the measured as-is assay from the COA for the weigh-up and the label worksheet, and do not use the theoretical 40.5% choline share as a substitute for the measured choline. ## Specification clauses for the grade - “L-alpha-glycerylphosphorylcholine, CAS 28319-77-9, C8H20NO6P, molecular weight 257.22.” - “Grade: 85% powder; assay 85.0–90.0% by HPLC, with the basis stated.” - “Choline 40.0–45.0% of the alpha-GPC content; state calculated or measured.” - “Water ≤3.0% by Karl Fischer; heavy metals and microbiology as the catalog.” - “Source route, allergen statement and carrier named where the grade uses one.” - “Pack: 1 kg foil pouch or 25 kg fiber drum; lot code on the pack and the certificate.” Name the grade on the purchase order and on the label. A switch between grades needs a new specification, a new fill weight and a label check; it is not a purchasing substitution. Catalog limits are on the product hub; the level-four comparison takes the choline figure and the label further; the COA page shows how the grade is reported. The HPLC method note covers the assay, the quality page covers release, and the citicoline product page shows the other choline-containing specialty ingredient. ### 02.1 Alpha-GPC vs choline: the choline figure and the label URL: https://nutrition.rainwoodbio.com/products/specialty/alpha-gpc/grades/alpha-gpc-vs-choline/ Reviewed: 2026-11-19 Alpha-GPC is L-alpha-glycerylphosphorylcholine, a molecule that is about 40.5% choline by mass; choline is the nutrient it carries, not another name for the same powder. A label that declares 300 mg of Alpha-GPC declares the ingredient and delivers about 122 mg of choline; a label that declares 300 mg of choline needs about 741 mg of the molecule, or 871 mg of the 85% powder. The two figures are not interchangeable, and the ingredient line has to say which one is being declared. In one lineAlpha-GPC is not choline: the molecule is about 40.5% choline by mass, so the label has to decide whether it declares the ingredient or the nutrient, and the two figures are not interchangeable. ## The molecule, the nutrient and the salts Choline is a quaternary ammonium cation, C5H14NO+. It is not sold as the free cation; it is supplied as a salt or as an ester. Choline bitartrate and choline chloride are salts. Alpha-GPC is an ester: choline is linked through a phosphate group to glycerol, which makes it a phospholipid rather than a choline salt. Citicoline is another choline-containing ester, with its own molecular weight and its own specification. A salt and an ester have different molecular weights, different choline fractions and different names on the label. The label and certificate are written around the ingredient that was weighed, not the choline it releases. ## The choline figure and its denominator One choline unit is 104.17 g/mol and the Alpha-GPC molecule is 257.22 g/mol, so the choline share of the molecule is 40.5%. The catalog window is 40.0–45.0%, read against the Alpha-GPC content. An 85% grade carries about 34.4% choline by powder mass, because only 85% of the powder is Alpha-GPC; the rest is carrier, related substances and water. The certificate should state its denominator. A choline result of 40–45% reported against the powder and a result of 40–45% reported against the Alpha-GPC describe different quantities, and a label worksheet that uses the wrong one will overstate or understate the nutrient by about 15%. The water figure on the same certificate moves the as-is assay, and therefore the choline delivered by a weighed fill. The choline figure at 40.5% of the molecule and an 85.0% powder | Declaration | Alpha-GPC needed | 85% powder needed | Choline delivered | 100 mg Alpha-GPC | 100 mg | About 118 mg | About 40.5 mg | 300 mg Alpha-GPC | 300 mg | About 353 mg | About 122 mg | 100 mg choline | About 247 mg | About 290 mg | 100 mg | 300 mg choline | About 741 mg | About 871 mg | 300 mg The table uses theoretical values; a real label uses the measured choline and as-is assay. ## What the label has to say The ingredient line and the nutrient line answer different questions. The ingredient line names what was weighed: “Alpha-GPC” or “L-alpha-glycerylphosphorylcholine”, with the grade where the destination requires it. The nutrient line, where the destination uses one, names choline and its amount per portion. A label that gives only “choline 300 mg” has hidden the ingredient; a label that gives only “Alpha-GPC 300 mg” has not stated the choline unless the panel also carries it. In the United States, Alpha-GPC is declared in the Supplement Facts panel as a dietary ingredient, by its own name. Where choline is declared, the choline Daily Value is 550 mg for adults and children aged four and over as of this review. In the European Union, choline is not in the Annex XIII nutrient reference value list, so a percentage of an NRV cannot be calculated for it; the label declares choline per portion and names the ingredient. As of this review, the authorised choline claims carry their own minimum per portion or per 100 g, and the claim is about choline, not Alpha-GPC. No disease-related claim is made here; the label review belongs to the brand's regulatory team. ## Dose arithmetic and the capsule If the label declares the ingredient, the powder weight is the declared Alpha-GPC divided by the as-is assay: 300 mg ÷ 0.85 = about 353 mg of the 85% grade. If the label declares the nutrient, the Alpha-GPC weight is the choline divided by 0.405, and the powder weight is that result divided by the as-is assay: 300 mg ÷ 0.405 ÷ 0.85 = about 871 mg. The second product is a much larger fill, and it may not fit the capsule the brand had in mind. A 500 mg capsule of the 85% grade carries about 425 mg of Alpha-GPC and about 172 mg of choline. The same capsule of the 50% grade carries about 250 mg of Alpha-GPC. Neither figure is a recommended intake; they are the numbers that keep label, fill weight and certificate aligned. The 50% grade needs about 70% more powder for the same Alpha-GPC dose; the choline stays the same. ## Alpha-GPC against the choline salts Per gram of powder, the choline salts carry more choline than the 85% Alpha-GPC grade, because the Alpha-GPC powder is 85% of a molecule that is 40.5% choline, while the salts carry a higher choline fraction. That does not make them substitutes. The ingredient name, the molecular weight, the dose, the water behaviour and the label line all change. Choline-containing ingredients and the powder needed for 300 mg of choline | Ingredient | Choline share of the powder | Powder for 300 mg choline | Ingredient line | Alpha-GPC 85% grade | About 34.4% | About 871 mg | Alpha-GPC (L-alpha-glycerylphosphorylcholine) | Choline bitartrate | 40.5–41.5% | About 730 mg | Choline (as choline bitartrate) | Choline chloride | About 74.6% | About 402 mg | Choline (as choline chloride) | Citicoline | About 21.3% | About 1,408 mg | Citicoline (CDP-choline) The bitartrate is a crystalline, acidic solid; the chloride is deliquescent and often handled as a solution; Alpha-GPC is deliquescent and has its own specification. A formulator who needs 300 mg of choline at the smallest fill would look at the chloride; a brand whose label names Alpha-GPC cannot use any of the others. ## Choosing the figure to put on the label If the label, the formula and the market file name Alpha-GPC, the declared figure is Alpha-GPC and the choline is a secondary figure that the nutrient panel may carry. If the product is a choline supplement and the brand has not chosen an ingredient, the choline salts are the direct route and the label names the salt. If the formula is built around citicoline, the choline figure follows citicoline's molecular weight and the label names citicoline. Whichever route is chosen, write the figure, its denominator and the grade into the specification, and make the certificate match. A switch from one ingredient to another needs a new specification, a new fill weight, a new label and a stability check. The Alpha-GPC product hub carries the catalog limits; the grades page compares the 50% and 85% specifications; the COA page shows where the choline figure sits on the certificate; the citicoline product page covers the other choline-containing specialty ingredient; the choline bitartrate product page covers the salt route; the HPLC method note explains the assay; the quality page sets out how a lot is released. ### 03 Alpha-GPC is deliquescent; the pack and the dose room set shelf life URL: https://nutrition.rainwoodbio.com/products/specialty/alpha-gpc/stability/ Reviewed: 2026-11-19 Alpha-GPC is deliquescent: it absorbs water from the air until the powder becomes sticky, then syrupy. Water and heat also hydrolyse the phosphate ester, so free choline rises while the alpha-GPC assay falls. The sealed foil pouch is the barrier, and the humidity of the dose room is the variable the pack cannot control after opening. Shelf life is assigned to a pack and a storage condition, not to the molecule in general. In one lineAlpha-GPC is deliquescent, so the pouch, the seal and the humidity of the dose room decide the shelf life more than any headline number does. ## The powder: water first The catalog limit is water ≤3.0% by Karl Fischer. That is a release limit, not a storage allowance. A pouch opened in a humid room takes up water within the working session; the powder sticks to the scoop, bridges in the feeder and gains weight on the balance. The as-is assay falls with the water, even when the dry alpha-GPC is unchanged. Leave the powder in its pouch and close it between weighings; the dose room should be dry. Do not decant it into a glass jar for convenience. A pack that has come out of a cold store should sit until it reaches room temperature, because opening it cold invites condensation onto the powder. ## The solution: hydrolysis, not just water Alpha-GPC is very soluble in water. In solution, the phosphate ester is exposed to hydrolysis, and heat and pH shift the rate. A clear aqueous stock held on a bench is the least stable format. A powder stick sidesteps this, since the water is added by the consumer only when the drink is made; a ready-to-drink liquid cannot, and its date code has to be earned in the finished drink. Where a liquid is the only option, set the pH deliberately, keep the thermal load low, prove the hold time before the fill line, and give the finished pack a light and oxygen barrier if the matrix needs one. Data from the powder cannot stand in for a test in the drink. ## Storage factors that matter Factors that move Alpha-GPC during storage | Factor | What it does | Control | Humidity | Deliquescence; water rises; the powder sticks | Sealed foil pouch; dry dose room; desiccant where needed | Water in the matrix | Hydrolysis of the phosphate ester; choline rises | Keep the formula water activity low; validate any liquid | Heat | Accelerates hydrolysis and moisture pickup | Cool store; low process heat load | pH | Shifts the hydrolysis rate in solution | Validate the matrix pH and the hold time | Pack seal | A pinhole or a folded-open pouch lets water in | Heat seal; inspect the strip; use within the in-use window | Time | Water and hydrolysis accumulate | Assign a retest period for the pack These factors act together. A warm, humid room with an open pouch is worse than either factor alone, and a liquid at neutral pH with a hot-fill step combines water, heat and time. The useful question is not whether Alpha-GPC is stable, but which pack, which condition and which test panel support the retest period. ## How the pack holds water back The 1 kg foil pouch is the standard unit. The foil blocks water vapour; the heat seal is where that barrier can fail. Folding an opened pouch over is not the same as resealing it, and the trapped headspace is already humid. If the campaign is long, move the remainder into a smaller dry container or finish the pouch inside the stated in-use window. Bulk orders travel in a 25 kg fiber drum, whose moisture barrier is the inner liner rather than the board. Close the liner after every draw, keep the drum off a damp concrete floor, and write the opening date on the label. A drum that is opened and closed over a humid week sees a different exposure from a pouch opened once. Nitrogen flushing and desiccant are options to specify, not assumptions about the standard pack. ## Designing the stability protocol Begin with the pack and the condition, not with the time points. A warehouse claim usually rests on 25 °C/60% relative humidity, with 30 °C/65% as the intermediate condition and 40 °C/75% as the accelerated arm. Add an open-pack arm at dose-room humidity, because the sealed incubator never reproduces the production bench. At each point, test assay, water, choline, appearance and microbiology. Choline is the hydrolysis marker: if it rises while the assay falls, the loss is chemical, not only a dilution by water. Give the numbers for each point rather than a pass/fail summary, and label the report with the pack and the lot family. The summary should belong to the pack in your purchase order, not to a sibling pack from the same range. ## The finished dose form changes the answer Capsules and tablets keep water activity low, yet moisture can still move through the shell and the excipients into the fill. Measure water when the lot is released and again after storage; inspect the fill for sticking and weight variation. A stick pack lives or dies on its seal: one pinhole ruins the pack, so inspect the strip as well as the powder. In a gummy or a liquid, the water is already present, and the hydrolysis question moves to the front. The dose room belongs in the stability discussion. A powder weighed in a dry room, returned to a sealed pouch and used within a defined window behaves differently from the same powder left in an open bowl for a shift. Write the in-use window into the batch record and train the operators to it; it is part of the shelf life in practice. ## Assigning a retest period A shelf-life figure cannot be separated from the pack and the store. We therefore publish no single number for Alpha-GPC; the retest period is written against a named pack and a named condition, and the stability file is the evidence for it. Without those three pieces, a number is only an assertion. When the retest period ends, re-assay the retained sample before extending it. An extension is a test result, not a default, and a figure earned on a drum does not transfer to a pouch that was repacked. Standard packs are listed on the product hub; water and choline on release are on the COA page; the MOQ page covers order quantities and pack sizes; the HPLC note covers the assay; the quality page covers release. The citicoline page covers the other choline-containing specialty ingredient. ### 04 Alpha-GPC MOQ: the 1 kg pouch and the 25 kg drum URL: https://nutrition.rainwoodbio.com/products/specialty/alpha-gpc/moq/ Reviewed: 2026-11-19 Alpha-GPC starts at 1 kg, in a 1 kg foil pouch; production quantities usually move to a 25 kg fiber drum, and the standard dispatch window is 1–7 days. A quotation can only be compared when it names the grade (85% or 50%), the assay basis, the choline denominator, the quantity and pack, the destination and Incoterm, the document set and the market. The 1 kg pouch doubles as the qualification sample — the smallest unit that carries its own lot code and certificate. In one lineThe 1 kg pouch is the smallest pack that carries a lot code, a certificate and enough material for a retained sample. ## Where the 1 kg minimum comes from One kilogram covers a bench run, a retained portion and an outside identity check, and it can ship as a parcel instead of a pallet. For a powder that picks up water, a small sealed unit is also easier to protect between weighings. Because the pouch has a lot code and a certificate, the trial and the production order can be compared on paper before the drum is opened. A smaller quantity means a repack from a larger lot. The repack costs an extra handling step, cuts the link to the original pack and gives the powder more time in room air; the chemistry is unchanged. The 25 kg drum wins on handling per kilogram but ties up inventory, and once its liner is opened the remainder is exposed for the length of the campaign, not just for one weighing. ## Standard packs Standard Alpha-GPC packs | Format | Net weight | Where it fits | Handling note | Foil pouch | 1 kg | Bench trial, sample, short run | Moisture barrier; reseal or finish within the in-use window | Fiber drum | 25 kg | Routine production | Inner liner; record the opening date | Granulated form | On request | Feeder flow; less dust | A different particle specification The catalog form is a powder; granulation is a separate particle specification, not a packing choice. The 50% grade is a separate grade with its own fill weight, not a pack of the 85% grade. If the dosage form needs a particular flow or bulk density, raise it before the quotation, because the change can move the lead time. ## Lead time, dispatch and documents The 1–7 day window covers picking, document preparation and dispatch; shipping transit, customs clearance and the customer's own quality release sit outside it. A granulated format or an unusual pack takes longer, and the quote should list that as a separate item. Ask for the dispatch date as well as the lead time. A drum is pallet freight and a pouch travels as a parcel; the trade term determines who arranges the freight and who handles entry clearance. Documents should travel with the lot rather than follow it. ## Six details a quotation needs - Product and grade. L-alpha-glycerylphosphorylcholine, CAS 28319-77-9, 85% or 50%. - Specification. Assay and basis, choline denominator, water, heavy metals and microbiology. - Quantity and pack. The number of kilograms and the pack chosen from the table above. - Destination and Incoterm. The country, the delivery point and the trade term. - Documents. The COA, the specification, the SDS and any importer-specific declaration. - Use and market. The intended category (supplement, food or other) and the country of sale. A quote that leaves out the grade or the destination cannot be compared with another. A powder that fits one market may sit outside the file for another, so the documents are part of the offer, not an afterthought. The quotation, not this page, carries the commercial terms. ## A sample that can be traced The 1 kg pack is a qualification lot. Test identity, assay, water and choline from it, and retain a portion of the same pack for later comparison. The lot code on the pouch, the certificate and the quotation should be the same code; without that link the sample is a demonstration and cannot qualify a production lot. If a smaller bench quantity is needed, raise it before the order is placed. A split from a drum is a repack with its own handling history, not the catalog pouch, and the record should say so. The bench sample and the production drum may also come from different lots; do not assume they match. ## Commercial and quality terms The quotation covers the Incoterm, the pack, the dispatch date and the document set. The quality side needs its own written terms: which specification revision applies, what certificate accompanies each lot, how the retained sample is kept, how long the retest period runs, how long an opened pouch may be used, and who approves a change of source, process or carrier. It is cheaper to agree these points before the first production order than to untangle them after a dispute. If a lot fails the agreed specification, work from the retained sample and a joint re-test rather than a photograph. Name the referee laboratory and the party that pays for the test in advance. Catalog limits are on the product hub; the COA page lists what a lot is released against; the stability page covers water and the in-use window; the compliance page covers the market file; the quality page describes release. The HPLC note covers the assay. The citicoline page covers the other choline-containing specialty ingredient. ### 05 The regulatory file for Alpha-GPC URL: https://nutrition.rainwoodbio.com/products/specialty/alpha-gpc/compliance/ Reviewed: 2026-11-19 Alpha-GPC is supplied as L-alpha-glycerylphosphorylcholine, CAS 28319-77-9, C8H20NO6P. The file for a destination begins with the grade and the source, then adds the lot evidence, the contaminant arithmetic and the label wording. The buyer's regulatory team confirms which route applies; this page sets out the material that team will need and the statements this site does not make. In one lineThe specification describes the powder; the route, the choline figure and the destination label belong to the buyer's regulatory review, and this page lists the evidence that review will ask for. ## The four questions the file answers Start with the material: the grade, the specification revision and the CAS number that appear on the purchase order. Next is the lot: its certificate and the measured results behind it. Then the destination: which route the buyer relies on, at what use level, with which label. Last is change control, because a new source, carrier or pack can move all three earlier answers. The certificate settles only the lot question. The technical data sheet describes the specification, and the safety data sheet covers handling. None of the three establishes a market route. Keep the statements that do — allergen, GMO, origin and residual solvents — in the same versioned folder. If a statement cannot be issued for a lot, say so before the order is placed; a missing document is easier to solve onshore than at the port. ## European Union The EU file is built on Regulation (EC) No 178/2002 (general food law), Regulation (EU) No 1169/2011 (food information) and Regulation (EU) 2023/915 (contaminants). Two route questions sit on top of those instruments. The first is whether the ingredient falls under the novel-food Regulation (EU) 2015/2283 for the market in question. The second is whether choline alfoscerate's status as a medicinal substance in some member states puts the product on the medicinal side of the boundary. Neither question is answered by the certificate. The buyer's regulatory team records the route, the member state, the use level and the label it relies on; a safety opinion alone is not an authorisation, and this page claims none. ## United States For a dietary supplement, the US framework is DSHEA and the cGMP rules in 21 CFR 111. The ingredient basis has to be identified by the party relying on it: a documented history of use as a dietary supplement, a GRAS basis for a defined use, or a new-dietary-ingredient notification. The scope matters. A GRAS basis for one food use does not automatically cover a supplement at a different dose, and the finished product and its claim are reviewed separately. This page does not assert which basis applies. ## Contaminant limits in the finished product A drum result is only the first step. The file has to show what the contaminant becomes in the finished serving, after the dose and the serving size are applied. The table gives the catalog limits and the evidence the file should carry; the destination text and the daily dose set the final acceptance. Catalog limits and the finished-product calculation | Parameter | Catalog limit | What the file should show | Water | ≤3.0% | The lot result and the as-is assay calculation | Lead (Pb) | ≤3 mg/kg | The measured figure, method and serving calculation | Arsenic (As) | ≤2 mg/kg | The measured figure, method and detection limit | Cadmium (Cd) | ≤1 mg/kg | The measured figure and any category exception | Mercury (Hg) | ≤0.1 mg/kg | The measured figure and method | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | The plate count and the absence result Report each metal separately. A total hides the element that is close to its limit, and a “less than” result without a detection limit cannot be converted into a finished-product figure. ## Label wording and claim review No disease-related claim is made for this ingredient here. As of this review, the EU choline claims are worded around choline rather than Alpha-GPC and carry their own conditions, so a product that declares Alpha-GPC must show the choline it delivers before it can rely on them. In the US, a structure/function statement needs the DSHEA disclaimer and has to be truthful and not misleading. A certificate does not establish that a claim is allowed, and a claim cannot rewrite the specification. The label states the material, the amount and where it came from, in whatever form the destination expects. In the EU, the ingredient line should carry the chemical name the file supports, and choline, if declared, is declared per portion; because choline has no Annex XIII nutrient reference value, no percentage of an NRV is calculated. In the US, a declared choline amount uses the 550 mg Daily Value for adults and children four years and older as of this review. The label, the grade and the certificate must agree. ## Documents in the file - Specification naming the grade, CAS number, assay basis and choline denominator. - Lot certificate with methods and measured results, not only limits. - Technical data sheet and safety data sheet. - Allergen statement that names the source route. - GMO, origin and residual-solvent statements. - Pack description and the in-use window for an opened pouch. - Change-control statement covering source, process, carrier and pack. - Destination-specific declarations, each with a version date. ## Pre-order checks - The purchase order names the grade, the CAS number and the specification revision. - The document pack is complete: certificate, technical and safety data, allergen, GMO, origin and solvent statements. - The choline figure states its denominator rather than leaving it to be inferred. - Contaminant results have been recalculated for the finished serving. - The claim and the label have been checked against the destination rules. - Source, process, carrier and pack sit under a written change-control procedure. Catalog limits are on the Alpha-GPC hub; the COA page shows how a lot is released; the identity page shows the tests behind the specification; the quality page describes the release file; the EU regulatory notes give the framework references; the HPLC note covers the assay; the citicoline page covers the other choline-containing specialty ingredient. ### 06 How we prove an Alpha-GPC lot is the L form URL: https://nutrition.rainwoodbio.com/products/specialty/alpha-gpc/identity/ Reviewed: 2026-11-19 Proving an Alpha-GPC lot means showing five things at once: the paperwork names L-alpha-glycerylphosphorylcholine and CAS 28319-77-9, the HPLC retention matches the L-alpha-GPC standard, the choline and phosphorus figures fit the structure, water closes the mass balance, and the optical rotation or a chiral method confirms the L configuration. No single assay percentage establishes all five, and the certificate should show the evidence behind every claim it makes. In one lineAn Alpha-GPC lot is the L form when the retention, the choline-to-phosphorus ratio, the optical rotation and the mass balance agree. ## Five independent identity checks A supplier can print the right name and CAS number without demonstrating that the powder is that material. The layers in the table are separate questions, and each needs its own result. An answer to the first layer is a statement about paperwork, not about the powder. Five layers of Alpha-GPC identity | Check | What it asks | Method | What it establishes | Document | Are the name, grade and CAS number right? | Name, CAS number, formula, grade | Paperwork only | Chromatography | Is the peak alpha-GPC? | HPLC retention against an L-alpha-GPC standard | The molecule, not the optical form | Composition | Do choline and phosphorus fit? | Choline by HPLC or enzymatic; phosphorus by ICP-OES | The glycerophosphocholine structure | Optical form | Is it the L form? | Specific rotation or chiral HPLC | The configuration | Mass balance | Is it diluted or hydrolysed? | Assay, water, choline, impurities | Internal consistency ## The choline-to-phosphorus ratio The molecule carries one choline unit, one phosphate group and one glycerol. Choline is 104.17 ÷ 257.22 = 40.5% of the molecule; phosphorus is 30.97 ÷ 257.22 = 12.0%. The molar ratio is 1:1 and the mass ratio is about 3.36 to 1. Those proportions come from the structure, so they remain valid whatever the assay says. The catalog window of 40.0–45.0% is read against the alpha-GPC content. Reported against the whole powder, an 85–90% lot would show roughly 34–37%, which is arithmetically right but uses a different base. Ask which base the laboratory used before comparing two certificates, and ask for phosphorus when the choline result sits outside the expected share. The ratio catches added free choline. Choline chloride or choline bitartrate raises choline without raising phosphorus, so the ratio climbs above 3.36 and an extra HPLC peak often appears near the solvent front. A maltodextrin or silica dilution lowers choline and assay together; a hydrolysis product lowers the assay and raises free choline without adding phosphorus. The last case is a quality defect rather than an adulteration, but the ratio moves in the same direction. ## X-ray diffraction: a narrow tool here Alpha-GPC is a deliquescent, largely amorphous solid, and the 85% grade is a formulated powder. A silica carrier gives a broad pattern with little information; a crystalline carrier gives a pattern that belongs to the carrier. Diffraction is therefore not an identity test for this molecule. A “XRD conforms” statement with no pattern and no reference tells the reader very little. It can still answer a solid-state question: whether the carrier changed, whether a crystalline diluent appeared, or whether a claimed reference matches. Ask for the pattern and the detection limit. The L form is proved by specific rotation or chiral HPLC, not by diffraction. ## Substitution signals Substitution routes and the evidence they leave | Substitute | Effect on the lot | Evidence | Test | 50% grade sold as 85% | Assay low; more powder per dose | Assay below 85%, choline per gram low | Assay, choline, carrier check | Added choline salt | Raises choline without adding alpha-GPC | Choline-to-phosphorus ratio above 3.36 | Choline and phosphorus, HPLC | Maltodextrin or silica | Dilutes assay and choline together | Assay low, carrier high | Assay, water, carrier identification | D-form or racemate | Same retention, wrong configuration | Rotation off the reference | Specific rotation or chiral HPLC | Other phospholipid | Adds a choline-containing peak | Extra peak, altered solubility | HPLC with ELSD or MS Colour proves little: white to off-white covers a range, and a brighter powder is not more authentic. Retention, the choline-to-phosphorus ratio, the optical form and the mass balance are the stronger signals. If a certificate gives appearance and assay but no identity evidence, the most likely substitution has not been tested. ## Specification clauses for identity - “L-alpha-glycerylphosphorylcholine, CAS 28319-77-9, C8H20NO6P, molecular weight 257.22.” - “85% grade; assay 85.0–90.0% by HPLC, with the basis named.” - “Choline 40.0–45.0% of the alpha-GPC content; state whether calculated or measured.” - “Water ≤3.0% by Karl Fischer; heavy metals and microbiology as the catalog.” - “HPLC retention against an L-alpha-GPC standard, with the chromatogram available.” - “Specific rotation or chiral HPLC for the L form, where the buyer requires it.” - “Source route and allergen statement; no undeclared carrier.” ## What to ask before accepting a lot - Which grade is this lot, and on what basis is the assay released? - Can you send the chromatogram, the detector and the reference standard? - Is the choline figure calculated on alpha-GPC or measured on the powder? - What rotation or chiral result did this lot give? - What is the Karl Fischer water, and what is the source and allergen statement? Five direct answers make an identity file; one assay figure does not. Catalog limits are on the product hub; the COA page shows where each figure is reported; the grades page sets out the 50% and 85% specifications; the HPLC note explains the separation; the quality page covers release. The citicoline page covers the other choline-containing specialty ingredient. ### 01 What the COA for alpha-ketoglutarate actually contains URL: https://nutrition.rainwoodbio.com/products/specialty/alpha-ketoglutarate/coa/ Reviewed: 2026-11-19 The certificate for an α-ketoglutaric acid lot lists appearance, IR and HPLC identification, assay, Karl Fischer water, the pH of a 5% solution, heavy metals and microbiology. Beside each parameter should sit the method and the limit the lot was released against, and beside those the measured result. The limits in the first table are the catalog specification; a certificate belongs to one lot and one pack. In one lineA certificate for this acid is only as useful as the method beside each number: HPLC for the assay, Karl Fischer for the water, and a pH reading that states how the 5% solution was made. ## Reading the certificate as a test report Each row of a good certificate can be checked without asking the supplier what it meant. It should say what was measured, how, and against which limit. “Conforms” alone records a judgement without the evidence, and the reader cannot tell a passing lot from a copied specification. The two rows that carry the most weight are identification and assay. Identity, assay, water, pH and contaminants · α-ketoglutaric acid | Parameter | Method | Release limit | Appearance | Visual | White crystalline powder | Identification | IR and HPLC retention | Conforms to the reference | Assay | HPLC | 98.0–102.0% | Water | Karl Fischer | ≤1.0% | pH (5% solution) | Potentiometric | 2.0–3.0 | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent The pH line deserves its own note. It is measured on a 5% solution, so the certificate should state how that solution was prepared; without the preparation, a reading cannot be compared across laboratories. A result outside 2.0–3.0 is a prompt to ask for the method and a re-test, not an automatic rejection. ## Assay basis, water and the HPLC method An assay means one of two things unless the basis is printed: the percentage of the powder as weighed, or the percentage of its dry matter. The 1.0% water limit keeps the difference small, but small is not zero. Take a lot at 97.5% as-is with 0.9% water: on the anhydrous basis it calculates to 98.39%, so the same powder passes one gate and fails the other. Ask for the basis in the assay row and the water result next to it. Ask, too, for the chromatographic conditions: column, mobile phase, wavelength and standard. An α-keto acid has a weak ultraviolet chromophore, so many assays run at a short wavelength where the baseline is sensitive to the solvent; a certificate that names no wavelength has described a technique, not a method. The numbers should also add up. Assay plus water plus impurity peaks have to be consistent; if the first two already exceed 100%, either the basis or the method is wrong, and the lot should not be released until that is resolved. ## The release limit and the measured result One number states where the specification draws the line; the other reports what the laboratory found. They need separate columns, and the method belongs beside both. Filling the result column with the specification range tells the reader nothing about the pack in front of them. What the result column should contain | Parameter | Release limit | Result column | Assay | 98.0–102.0%, basis stated | A measured percentage, with its basis and method | Water | ≤1.0% | A measured percentage | pH (5% solution) | 2.0–3.0 | The measured pH and the solution strength | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot | Appearance | White crystalline powder | A short description of the lot “Passes specification” should be a conclusion the reader can verify. Metals need a figure per element rather than a total, because a sum can hide the one that is close to its limit. For microbiology, the count and the absence statement must be tied to the lot rather than copied from a generic panel. ## What shifts from lot to lot Different production routes leave different fingerprints. Fermentation and chemical oxidation can both yield the acid, but the residual organic acids, the colour and the trace-metal profile may not match. The crystallisation and drying steps move water and crystal habit, and granulation moves the particle-size result when that grade is bought. Appearance is a coarse signal but a useful trend. White to off-white is the catalog description; a cream or yellow cast may mean heat exposure or an oxidation product while the assay is still inside its range. Compare several lots before rejecting one on colour, and ask for the batch record. Every certificate should be tied to a pack. The lot code has to appear on the pouch or drum label, the certificate and the retained sample; a certificate that cannot be matched to a pack is only a data sheet with a date. ## When to bring in an outside laboratory Independent testing earns its place when a source is new, a market is regulated, a result is disputed or the form is unproven. The panel should be built around the question: HPLC with a stated wavelength and IR for identity, Karl Fischer for water, pH of the 5% solution, ICP-MS for the metals and a microbiology set. Calcium by ICP-OES is the test to add when the form is uncertain. The acid contains none; the calcium salt contains about 21.8%, so the counter-ion result separates materials that a keto-acid assay cannot. Reserve NMR or high-resolution mass spectrometry for an unidentified impurity. Ask for the detection limit behind every “not detected”. Without the limit, the statement describes the laboratory's sensitivity rather than the sample. Trace it as well: the material in the laboratory should be the retained material, and the lot number should appear on the report. ## Comparing two suppliers Six lines to place side by side | Line | What to compare | Form and CAS | α-Ketoglutaric acid, 328-50-7, not the calcium salt | Assay and basis | The figure, the method and whether it is as-is or anhydrous | Water | The measured result against the ≤1.0% limit | pH | The 5% solution result and how the solution was made | Contaminants | Metals per element and the microbiology count | Pack and lot | Pouch or drum, lot code and retained sample Two offers that match on assay but differ on form or basis are offers for different powders. After the numbers, compare traceability: manufacturer, route, drying and packing, and the documents that follow the lot. Catalog values are listed on the product page; the acid-versus-salt tests are on the identity page; the market questions are on the compliance page; the assay is described in the HPLC method note; release is covered on the quality page. ### 02 Alpha-ketoglutarate grades: acid, calcium salt and particle form URL: https://nutrition.rainwoodbio.com/products/specialty/alpha-ketoglutarate/grades/ Reviewed: 2026-11-19 The catalog grade is α-ketoglutaric acid, CAS 328-50-7, C5H6O5, a white crystalline powder at 98.0–102.0% by HPLC. Calcium α-ketoglutarate is a different salt with its own CAS number, molecular weight, calcium figure and label name, and granulated acid is the same chemistry at a coarser particle size. The choice follows the dosage form, the label and the market file, not assay alone. In one lineThe grade decision is the chemical form first and the particle size second; calcium α-ketoglutarate is a different salt, not a stronger acid. ## Why there is more than one grade α-Ketoglutaric acid is a dicarboxylic acid, also written 2-oxoglutaric acid, and its two acid protons can be replaced by a metal. In calcium α-ketoglutarate both protons are replaced by one calcium ion, which gives a different formula, a different molecular weight and a different CAS number. The two materials are related, but they are not interchangeable. Within the acid there is a second, smaller choice: crystalline powder or granulate. Granulation changes flow, dust and the rate at which the powder dissolves. It does not change identity, assay or the chemistry, so the grade question has two layers, and the chemical one comes first. A purchase order that names only “AKG” or “alpha-ketoglutarate” has not chosen a grade. Order, specification and label should spell out the form, the CAS number and the physical grade identically. ## The acid and the calcium salt side by side α-Ketoglutaric acid and calcium α-ketoglutarate | Property | α-Ketoglutaric acid | Calcium α-ketoglutarate | CAS number | 328-50-7 | 71686-01-6 | Formula | C5H6O5 | C5H4CaO5 | Molecular weight | 146.10 | 184.16 | Calcium content | None | About 21.8% by mass, anhydrous | Acid equivalent | 1 g of acid per gram | About 0.793 g of acid per gram | Salt type | Free acid | Calcium salt | Label name | α-Ketoglutaric acid | Calcium α-ketoglutarate The acid-equivalent row is the one that travels into dose arithmetic. The calcium row is the one that travels into the label. Neither row is a statement that one form is better; they are different ingredients for different jobs. ## Powder, granulate and the physical behaviour of the salt The acid is a white crystalline powder, freely soluble in water, and a 5% solution reads pH 2.0–3.0. It is hygroscopic: left open, it takes up water, cakes and gains weight on the balance. The catalog limit is water ≤1.0%, and the pack is part of keeping it there. Granulation is a finishing step. A granulated acid flows better in a tablet press or a stick filler and raises less dust, but it should still carry the same assay, water and pH limits, plus a particle-size line of its own. Granules usually dissolve more slowly than the fine powder, so a formulator who switches should check dissolution in the real matrix rather than assume it. The calcium salt is a different solid with its own solubility, solution pH and water uptake. Its physical behaviour cannot be read across from the acid, and a specification for it has to be built and tested for that salt. What the two share is the keto acid, not the powder. ## Which grade suits which dosage form For capsules and tablets, either the powder or the granulate works, and the choice is about flow and fill weight. The hygroscopic powder needs a pack that keeps water out after the bottle is opened; the granulate handles more easily but takes more volume at the same mass. The label declares the acid, so the fill weight is the acid mass. For powder sticks and drink mixes, the acid dissolves readily, but a 5% solution is acidic and the taste follows. A formulator can buffer or flavour around it, and the buffer changes the solution pH and therefore the stability data the drink needs. A granulated grade may dissolve more slowly in a cold drink; test it in the intended use. The calcium salt belongs in a formula where the calcium is part of the label and the market file, not as a quiet way to add a mineral. It also changes the ingredient name on the panel, so a formula built around the acid cannot be switched without re-checking the label and the dose arithmetic. ## Clauses for the specification - “α-Ketoglutaric acid, CAS 328-50-7, C5H6O5.” - “Assay 98.0–102.0% by HPLC, with the basis stated.” - “Water ≤1.0% by Karl Fischer; pH of a 5% solution 2.0–3.0.” - “Heavy metals and microbiology as listed on the catalog specification.” - “Particle size and flow where a granulated grade is bought.” - “Pack and storage condition, because the powder is hygroscopic.” - “Destination market and form confirmed before the order.” ## When the other grade is a mistake Do not choose the acid when the label, the market file or the customer's specification names the calcium salt. Do not choose the calcium salt as a substitute when the formula was built on the acid's pH and solubility. Do not choose a granulated grade for a drink mix without checking that it dissolves in the time the consumer will give it. The reverse cases matter too. A buyer who needs a free-flowing blend should not accept fine powder and adjust the process afterwards, and a buyer who needs the acid should not accept the salt because the assay figure looks similar. The form belongs to what the material is, and it should be fixed before anyone stands at the balance. The product hub carries the catalog specification; the level-four comparison takes the salt and the calcium figure further; the COA page shows how the form is reported; the compliance page covers the market file. A second hygroscopic specialty powder, D-ribose, shows the same pack-and-moisture logic from a sugar rather than an acid. ### 02.1 AKG acid vs calcium AKG: the salt, the calcium figure and the label URL: https://nutrition.rainwoodbio.com/products/specialty/alpha-ketoglutarate/grades/akg-vs-calcium-akg/ Reviewed: 2026-11-19 α-Ketoglutaric acid (CAS 328-50-7, C5H6O5, 146.10) and calcium α-ketoglutarate (CAS 71686-01-6, C5H4CaO5, 184.16) are one keto acid in two forms: the free acid and its calcium salt. One calcium ion replaces both acid protons, so the calcium salt carries about 21.8% calcium by mass and one gram is about 0.793 g of acid equivalent. The form on the certificate, the label and the market file has to be one form. In one lineBetween the acid and its calcium salt sits one calcium ion, about 38 mass units, roughly 21.8% calcium and a different label name. ## Two identities, not two strengths α-Ketoglutaric acid is a dicarboxylic acid: two carboxyl groups on a five-carbon chain with a ketone at the 2-position. In the calcium salt, one calcium ion takes the place of both acid protons: two hydrogens leave the formula and one calcium joins it. That is a small structural change with a large documentary one. The two materials have separate CAS numbers, separate molecular weights, separate certificates and separate label names. “AKG” is a shorthand that covers both, and a specification written on the shorthand has not chosen either. Neither form is a stronger version of the other; they are different ingredients with different masses and different behaviour in water. ## The calcium figure α-Ketoglutaric acid and calcium α-ketoglutarate in figures | Property | α-Ketoglutaric acid | Calcium α-ketoglutarate | CAS number | 328-50-7 | 71686-01-6 | Formula | C5H6O5 | C5H4CaO5 | Molecular weight | 146.10 | 184.16 | Calcium content | None | About 21.8% by mass | Acid equivalent | 1.000 g per gram | About 0.793 g per gram | Label name | α-Ketoglutaric acid | Calcium α-ketoglutarate The calcium figure follows from the formula: 40.08 ÷ 184.16 = 0.2176, or about 21.8% by mass in the anhydrous salt. One gram of the salt therefore carries about 218 mg of calcium, and 500 mg carries about 109 mg. The acid carries none. A hydrate carries less calcium per gram, so the water result on the certificate belongs beside the calcium figure whenever the salt is bought. This is also the simplest analytical check. Calcium by ICP-OES separates the two forms even when the assay of the keto acid looks the same, and a blend of the two lands between the ends in proportion to the mix. ## Dose arithmetic between the forms The acid equivalent converts the two masses. The factor is 146.10 ÷ 184.16 = 0.7934: one gram of the calcium salt is about 0.793 g of acid equivalent, and one gram of the acid is about 1.26 g of the salt. For 200 mg of declared acid equivalent, the weigh-up is 200 ÷ 0.7934 = 252 mg of the salt. Read the other way, 200 mg of the salt provides 159 mg of acid equivalent. These are conversions, not recommendations. The amount that may be used in a market, and any maximum level, are questions for the buyer's regulatory team; this page does not set them. The conversion also has to be applied to the assay basis: a salt assay on the anhydrous basis is not the mass as weighed, and the water result sits between the two. Keep the declaration basis consistent. A panel that says “α-ketoglutaric acid 300 mg” and a weigh-up that uses 300 mg of the calcium salt are 62 mg apart in acid equivalent, because 300 × 0.7934 = 238 mg. That gap is a labelling error, not an overage. ## The declaration follows the form EU labelling starts from the form that was purchased: the ingredient name has to identify it. “α-Ketoglutaric acid” and “calcium α-ketoglutarate” are not interchangeable words, and the calcium salt brings a calcium contribution that may need its own place in the nutrition declaration. If the calcium is declared as a nutrient, the EU reference intake for calcium is 800 mg/day as of this review; one gram of the salt supplies about 218 mg, which is roughly 27% of that reference. Check the current text before printing. On a US Supplement Facts panel the dietary ingredient is named, and any calcium from the salt feeds the calcium declaration. “AKG” alone does not identify either form, and a panel that uses it leaves the reader and the reviewer to guess. The form on the label must be the form the market file covers; convenience at the time of sourcing is not a criterion. This page is not label text. The buyer's regulatory team confirms the declaration, the nutrient reference values and the claim wording for the destination; no authorisation is asserted here. ## The acid and the salt in water The acid dissolves freely, and its 5% solution reads pH 2.0–3.0. That acidity is useful in some formulas and a problem in others: a drink mix at that pH is sour, and the buffer that fixes the taste also changes the stability data the drink needs. The acid is hygroscopic, and its solution is unstable, so a liquid format needs its own hold time and its own pack. The calcium salt is a different molecule in water. Its solubility, its solution pH and its stability are properties of the salt, not of the acid, and they have to be measured for the grade being bought. A formulator who swaps one for the other to avoid the acidity should test the replacement in the matrix rather than assume the swap is neutral. ## Choosing between them Choose the acid when the label, the market file and the formula name the free acid, and when the acidic solution is acceptable or can be handled. It is the form in the catalog and the form with the specification on this site. Choose the calcium salt only when the calcium is intended, the label declares it, and a specification for that salt has been agreed and tested. In either case the purchase order, certificate, label and market file should carry one form and one CAS number. Changing form is a change control with a new specification and a fresh label check, not a factor applied at the weighing bench. The product hub carries the catalog specification; the grades page places this comparison beside the physical grades; the identity page gives the calcium test; the compliance page covers the market file; the HPLC method note explains the assay. A second specialty powder, D-ribose, shows how a sugar's form and moisture behave differently from an acid's. ### 03 Alpha-ketoglutarate is hygroscopic, and its solution is unstable URL: https://nutrition.rainwoodbio.com/products/specialty/alpha-ketoglutarate/stability/ Reviewed: 2026-11-19 α-Ketoglutaric acid picks up water from the air, and once it is dissolved it begins to change. The foil pouch and a dry weighing room protect the powder; a liquid needs its own hold time, measured in the real matrix. The retest period belongs to the pack and the storage condition, not to the name on the label. In one lineWater shortens the powder's life and time in solution shortens the liquid's, so the pack, the seal and the validated hold carry the shelf life. ## The powder: watch the water result Karl Fischer water is capped at 1.0% at release. Passing that gate says nothing about the pouch a year later: the acid is hygroscopic, and every opening exchanges dry air for room air. The powder clumps, sticks to the scoop and gains mass, and the as-is assay slides downward although the dry acid has not changed. Keep the pouch closed between weighings and keep the weighing room dry. A desiccant is useful in a humid climate but it cannot compensate for a fold-over closure. Let a cold pack reach room temperature before it is opened, so condensation does not settle on the powder. Watch the colour and the texture. A white crystalline powder that turns cream, feels tacky or forms hard lumps has met water, and possibly heat. Re-drying a wet lot in an oven is not a repair: heat is part of the degradation route, and the lot needs a fresh assay before it can be used. ## The solution: the weakest format Dissolved in water, the keto acid is at its most vulnerable. In water the acid keeps reacting, and heat and pH both change the rate. A 5% solution reads 2.0–3.0, so a drink made with the acid is already acidic before any flavour system is added. A stock left on a bench for a shift is a hold that has to be measured, not assumed. A stick pack sidesteps most of this because water is added at the point of use. A ready-to-drink product does not, and its stability has to be shown in the finished beverage, with the process heat load and the pack included. If a liquid is the only option, shorten the hold, fix the pH, keep oxygen low and keep iron and copper out of contact. Bulk data cannot be pasted onto a drink formula. The matrix, the process and the pack each shift the loss rate. ## What shortens the life Factors that move α-ketoglutaric acid during storage | Factor | What it does | Control | Water | Raises the water result; causes caking; dilutes the as-is assay | Sealed pouch; dry room; desiccant where needed | Heat | Speeds breakdown in solution | Cool store; low process heat load | Time dissolved | Lengthens exposure to water, oxygen and pH | Short validated hold; point-of-use mixing | pH | Changes the ionised form and the degradation rate | Fix and record the matrix pH | Oxygen | Oxidises the keto acid in solution | Low headspace; deaeration where possible | Iron and copper | Catalyse oxidation; shift the colour | Stainless or lined contact surfaces | Microbes | Can grow in an aqueous system | Preservative and process validation These are not separate switches. A warm, humid store plus an open pouch is worse than either alone, and a clear tank at the wrong pH combines several at once. The question worth asking is not whether the acid is stable, but in which pack, at which condition and for how long. ## A protocol for the pack you will buy Write the study around the pack that will be sold. The warehouse arms are 25 °C/60% and 30 °C/65% relative humidity; the accelerated arm is 40 °C/75%. Add a solution arm at the intended pH and process temperature, because the powder chambers will never show what a beverage does. Assay, water, pH, appearance and microbiology are measured at every pull. For a stick or a drink, repeat the panel in the matrix. Results should be listed one by one rather than compressed into “pass”, and the report should name the pack and the lot family. Order the summary for the pack on the purchase order. A drum and a pouch differ in headspace and in how often they are opened, so data from one does not describe the other. ## Capsules, sticks and drinks change the answer A capsule or tablet has little free water, yet the shell and the excipients can still pass moisture into a hygroscopic fill. Check water and appearance at release and again at the end of the assigned period, and look at the fill for caking. In a stick pack, inspect the seal as well as the powder: a pinhole defeats the foil. A beverage brings pH, heat, oxygen and time into the same container. Bulk data starts the answer but does not finish it. An overage is a label decision and a stability decision; it does not rescue a pack that leaks or a hold that is too long. D-ribose is another hygroscopic specialty powder, and it fails at the same place: the seal and the humidity of the room. ## Assigning a retest period A single shelf-life figure would mislead for this acid: the number belongs to a pack and a condition. The specification states a retest period that the stability file for that pack supports. A figure quoted without a pack, a condition and a test list is a marketing line. Before extending use past the retest period, re-assay the retained sample. Extension needs a result, and a drum figure cannot be copied onto a repacked pouch. For the pack list see the product hub; for release tests the COA page; for pack and timing the MOQ page; the assay is in the HPLC note and the release workflow on the quality page. ### 04 Alpha-ketoglutarate: MOQ, packs and ordering URL: https://nutrition.rainwoodbio.com/products/specialty/alpha-ketoglutarate/moq/ Reviewed: 2026-11-19 We ship α-ketoglutaric acid from a 1 kg foil pouch, with a 25 kg fiber drum for production volumes. For the standard pack, allow 1–7 days after confirmation. We can quote firmly once we know the form and CAS number, the quantity and pack, the assay basis, the document list, the destination and Incoterm, and the market. In one lineOne kilogram is where a lot, a retained sample and a certificate can travel together without repacking. ## Why one kilogram A kilogram is the smallest quantity that still arrives as a lot. It carries its own code, its own certificate and enough material for a bench trial, a retained sample and an outside check. Below that, the powder has to be split out of a bigger lot, and the split loses the pack identity the paperwork depends on. The pouch also travels as a parcel, which helps a formulation team that needs material before the factory schedule is fixed. The drum suits production because it cuts handling per kilogram, though it means more stock and a longer storage period for a powder that attracts water. Neither pack is a volume incentive; they are two handling units. ## Packs we ship Standard α-ketoglutaric acid packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Heat-sealed; close between weighings | Fiber drum | 25 kg | Production | Liner keeps water out; lot code on drum and liner | Granulated powder | 1 kg or 25 kg | Better flow, less dust | New particle-size line; same acid Granulating the acid is a specification change, not a packing preference. The particle-size line is re-set and the release has to be sampled again; a formulator who needs a coarser powder should raise it before the quotation, because the extra step can add time. ## From confirmation to dispatch The standard window is 1–7 days from confirmation. Picking, paperwork and handover to the carrier sit inside it; transit, customs and the customer's own release sit outside it. A granulated batch or a non-standard pack is quoted with its own timing rather than folded into the standard figure. Book against a dispatch date, not a range. The Incoterm decides who arranges the movement and who clears the entry, and the two packs do not travel alike: the drum is a pallet, the pouch a parcel. Documents should be in the same shipment as the material. ## Six details a quotation needs An enquiry becomes a quotation when it carries six things: - Identity. α-Ketoglutaric acid, CAS 328-50-7; the calcium salt is a separate enquiry. - Specification. Assay and its basis, water, pH of the 5% solution, metals and microbiology. - Volume and pack. 1 kg pouch, 25 kg drum, or granulated in either pack. - Route. Destination country, delivery point and Incoterm. - Paperwork. Certificate, specification, safety data sheet and the importer's statements. - Use and market. What the material goes into and where the finished product will be sold. Without the market and the form, a quotation only describes a powder. A lot that clears one market's file may sit outside another's. Commercial terms are given on the quotation; this page does not carry them. ## The sample is a released lot Qualify the material from the 1 kg pouch, not from a demo scoop. Identity, assay, water, pH and microbiology can all be checked from it, and a portion should be retained for comparison with the production drum. The lot code has to run through the pouch label, the certificate and the quotation. A bench quantity below 1 kg is a repack from a larger lot. It can be arranged, but it carries its own traceability and should be described that way in the project file. It is not safe to assume that a bench split and the production drum share a lot number. ## Terms to settle before ordering Commercial terms — Incoterm, pack, timing and documents — are agreed on the quotation. Quality terms sit beside them and deserve the same attention before the first production order: the specification revision, a certificate for each lot, the retained sample, the retest period and the route for a change. If a lot is rejected, the decision should rest on the retained sample and a joint re-test; a photograph is not evidence. Agree in advance which laboratory both sides accept for the referee test. The signed quotation and the quality agreement set out returns and replacements. Catalog values are on the product hub; release tests are listed on the COA page; market files are covered on the compliance page; the MOQ glossary entry defines the term; shipping and documents are on the logistics page. ### 05 The regulatory file for alpha-ketoglutarate URL: https://nutrition.rainwoodbio.com/products/specialty/alpha-ketoglutarate/compliance/ Reviewed: 2026-11-19 The material on this page is α-ketoglutaric acid, CAS 328-50-7, and its calcium salt is a separate ingredient with its own CAS number. A specification and a certificate describe the powder; they do not decide whether it may be sold in a given market. That decision belongs to the buyer's regulatory team, and this page sets out the file they will want. In one lineA specification and a certificate answer what the powder is; only the destination file answers whether it can be sold and how it must be named. ## The four questions the file answers The file has to answer four things. First, the identity and revision of what is being bought. Second, the laboratory findings for the lot on release. Third, the limits and label rules that govern the finished product where it will be sold. Fourth, the trigger list: what has to be re-opened if source, process or pack changes. The lot is evidenced by its certificate, the specification by its data sheet, and handling by the safety data sheet. Route is a fourth document, built by the buyer for the destination. Start with the form: the free acid and the calcium salt differ in CAS number, calcium content and name, and a file that mixes them belongs to neither. ## European Union In the EU the file rests on the general food law, the food-supplement framework, the labelling rules and the contaminant regulation. Where a form has a product-specific route, that route sits on top and may set its own conditions. As of this review, read Regulation (EC) No 178/2002, Directive 2002/46/EC, Regulation (EU) No 1169/2011 and Regulation (EU) 2023/915, and check the current consolidated versions rather than a summary. No statement on this page should be read as confirmation that either form is authorised as a novel food or as a food-supplement ingredient in the EU. The destination file makes that call. For Great Britain, read the GB register and GB labelling on their own; Northern Ireland stays with the EU framework. ## United States The US route depends on the exact dietary ingredient and on what the finished product claims to be. The supplier should be able to explain what basis it holds and produce the paper; whether that basis reaches the finished product and its panel statement is the buyer's judgement. The Supplement Facts panel needs a name that identifies the form, and “AKG” does neither. Certification and marketing review are separate exercises. A lot that meets the purchase specification has not thereby cleared its route, and a supplier letter does not replace the buyer's own review. Federal requirements current at the time of sale govern. ## Contaminants at the finished-product level The finished product carries the limit, so the calculation starts from the daily dose rather than from the drum result. The table gives the usual supplement starting points; the destination text sets the final figure. Contaminants to confirm at the finished-product stage | Contaminant | Usual supplement starting point | Evidence for the file | Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method, limit and the finished-product calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception that applies | Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result and method | Arsenic (As) | Customer or market limit | The agreed limit and the method, stated on the certificate Water and pH are specification parameters, not contaminant limits; they belong in the release record. The calculation uses the daily dose and the ingredient's share of the formula, not the raw-material result in isolation. ## Label, claims and form The label has to name the material, the quantity and the form the destination expects. Here the form is the name: “α-ketoglutaric acid” and “calcium α-ketoglutarate” are different declarations, and the calcium salt may also require a calcium entry in the nutrition information. The label should follow the form covered by the market file, not whatever was available at the time of production. Claims are a separate review. The brand's reviewer decides whether a wording is permitted for that product, form and market. Approving a claim is a different act from certifying a lot, and neither alters the specification. Nothing on this page is a disease-related claim. ## Papers in the lot file The lot file that buyers usually ask for contains: - a certificate for the lot: appearance, identity, assay, water, pH, metals and microbiology; - the technical data sheet and purchase specification, naming the form and CAS number; - a safety data sheet in the 16-section format; - allergen, GMO, origin and residual-solvent statements; - the specification revision, pack and retest period; - an independent certificate where the buyer's review asks for one. Each document should be dated or versioned, or tied to a lot. Version and lot references are what tie the set together; without them the papers prove nothing. ## Pre-order checklist - One form and one CAS number appear on the specification, certificate and label. - The assay basis, water result and 5% solution pH are all reported. - Metals are re-checked against the finished-product dose. - Label and claim wording have passed review for the destination, calcium included. - Source, process and pack sit under change control, and the regulatory team has confirmed the route. - One revision number should appear on the quotation, the specification and the certificate. Catalog values are on the product hub; the lot certificate is explained on the COA page; the analytical evidence is on the identity page; the acid and the salt are separated on the grades page. Release is described on the quality page, and the framework reference is the EU regulatory note. ### 06 How we prove a lot is alpha-ketoglutaric acid URL: https://nutrition.rainwoodbio.com/products/specialty/alpha-ketoglutarate/identity/ Reviewed: 2026-11-19 A lot is the free acid when the certificate names CAS 328-50-7, the HPLC retention and IR spectrum match the reference, calcium stays at or below the reporting limit, and the assay and water balance. None of those checks is sufficient alone; the assay in particular cannot separate the acid from calcium α-ketoglutarate or from a diluted lot. In one lineFour independent readings have to agree before the name is safe: the chromatogram, the IR spectrum, the calcium figure and the water result. ## Four separate checks A name on a certificate is paperwork. The powder behind it has to answer four separate questions, and each one needs a different measurement. Suppliers often answer the first and stop. Four checks on an α-ketoglutaric acid lot | Check | What it settles | How it is read | Result that supports the name | Paper | Which form is declared | Name, CAS and formula on the sheet | A statement, not a measurement | Chromatography | Whether the keto acid is present | Retention time and IR bands | A match to the reference | Counter-ion | Whether the salt is absent | Calcium by ICP-OES | At or below the reporting limit | Balance | Whether the lot is diluted | Assay, water, impurity peaks | Figures that add up A matching chromatogram and a near-zero calcium figure together are stronger than either alone. The water result then says whether the assay was expressed on a dry or an as-is basis. ## The calcium ratio: proving the free acid Calcium is the form check that is easiest to add. The free acid contains none; the calcium salt contains about 21.8% in the anhydrous form. A lot sold as the acid should return calcium at or below the method's reporting limit, and one sold as the salt should return a figure that agrees with its formula and its water content. A physical blend of the two falls somewhere between. ICP-OES sits outside the catalog specification. Call for it when the form is contested, during source qualification, or when label and certificate name different forms. Get the reporting limit with the result; “less than” is meaningless without the number attached to it. Solution pH supports the calcium figure. The acid reads 2.0–3.0 at 5%, and a calcium salt solution is less acidic at the same strength; pH is not quantitative because concentration and residual acid move it. IR adds a structural check: the carbonyl region of a carboxylic acid differs from that of a carboxylate, so a match to an acid reference also argues against the salt. ## X-ray diffraction and the solid form Diffraction asks about the solid, not the solution: is the powder crystalline, and does the pattern fit a reference? It separates a crystalline acid from an amorphous blend and lets two sources be compared. Purity and the counter-ion are outside what it measures. Read the reference pattern, not just the word “match”. In a dispute, diffraction, calcium, HPLC and IR together carry more weight than any single result. It is not a routine release test here, and “XRD conforms” without a pattern says almost nothing. ## How substitution shows up Substitutions to watch for and the signals they leave | Adulterant | What it does | Signal | Test | Calcium salt | Adds calcium; makes the solution less acidic | Calcium near 21.8%; higher pH | ICP-OES, pH, IR | Succinic or malic acid | A common bulk acid with similar handling | Low assay or an extra HPLC peak | HPLC, IR | Bulking agent | Dilutes the acid | Assay low; water or ash high | Mass balance | Water | Lowers the as-is assay | Water high; dry-basis assay normal | Karl Fischer | Another keto acid | Similar carbonyl chemistry | Retention or IR mismatch | HPLC, IR, NMR Appearance proves almost nothing: white crystalline powder covers a wide family of materials, and a recrystallised blend can match it. The calcium figure, the IR spectrum and the balance are the readings that matter. ## Identity clauses for the specification - “α-Ketoglutaric acid, CAS 328-50-7, C5H6O5.” - “Assay 98.0–102.0% by HPLC, basis stated on the certificate.” - “Identification by IR and by HPLC retention against a reference.” - “Water ≤1.0% by Karl Fischer; pH 2.0–3.0 for a 5% solution.” - “Calcium by ICP-OES at or below the reporting limit for the acid form.” - “Heavy metals and microbiology as per the catalog specification.” - “Pack, storage condition and destination recorded before the order.” ## Five questions to put to the supplier - Which form and which CAS number does this lot's certificate carry? - What do the chromatogram and IR spectrum show for this lot? - What calcium result did ICP-OES return, and what is the reporting limit? - How much water did the lot carry, and against which basis was the assay expressed? - Would you agree to a joint re-test of the retained sample if the lot is disputed? An identity file is these five answers taken together, not one assay figure on its own. The catalog specification and the form are on the product hub; the certificate line by line is on the COA page; the form comparison is on the grades page; the label consequences are on the level-four comparison; the separation is explained in the HPLC method note. ### 01 What the COA for alpha-lipoic acid actually contains URL: https://nutrition.rainwoodbio.com/products/specialty/alpha-lipoic-acid/coa/ Reviewed: 2026-11-19 A certificate for a racemic alpha-lipoic acid lot reports appearance, identification by infrared and HPLC, assay by HPLC at 99.0–101.0%, melting point at 60–62 °C, loss on drying at ≤0.5%, the heavy-metal panel, microbiology and particle size at ≥95% through 40 mesh. The assay and the melting point are the usual identity screen, and neither one separates the racemic grade from the R-form. The limits in the first table are the catalog specification; the result column on a batch certificate is where the measured numbers belong. In one lineThe assay says how much lipoic acid is present, the melting point and the infrared spectrum say which solid it is, and the loss on drying decides how the percentage is read. ## The certificate as a test report A release certificate becomes auditable when every line carries three things: the parameter, the method that produced the number, and the limit the lot was released against. A line that says only “conforms” records a conclusion and withholds the evidence. For this material the identity line should name infrared and HPLC together, because the infrared spectrum carries the carboxyl and disulfide bands and the HPLC retention carries the molecule as a whole. Identity, assay and release limits · racemic alpha-lipoic acid | Parameter | Method | Release limit | Appearance | Visual | Yellow crystalline powder | Identification | Infrared and HPLC | Conforms to the reference | Assay | HPLC | 99.0–101.0% | Melting point | Capillary method | 60–62 °C | Loss on drying | Gravimetric | ≤0.5% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh ## Assay, basis and the mass balance The catalog range is 99.0–101.0% by HPLC, and the certificate should state the basis the figure is reported on. With loss on drying at ≤0.5%, the gap between the as-is and the dried figure is at most about half a percentage point, which is enough to move a lot across the 99.0% line. A result of 99.0% as-is with 0.5% water calculates to about 99.5% on the dried basis; the same number describes two different powders. An upper limit above 100% is normal for an assay read against an external reference standard, because the result is a ratio to the standard rather than a mass balance. It is not a licence to accept a result of 103%. The mass-balance evidence sits in the other lines: loss on drying, melting point and the sulfur content, which is 31.1% for the pure molecule. HPLC supplies the assay and part of the identity, but a single peak at the right retention time can still be another disulfide. Infrared is the second dimension, and the melting point is the third. A certificate that reports a percentage and an appearance but no spectrum and no melting range has not shown the solid. ## Release limit versus batch result The release limit is the boundary; the batch result is the measurement. Both belong on the certificate, in separate columns, with the method beside them. A result column filled with the specification range is not a result, it is a copy of the gate. What the result column should contain | Parameter | Release limit | Result column | Assay | 99.0–101.0% by HPLC | A measured percentage, with the basis | Melting point | 60–62 °C | A measured range, start and end | Loss on drying | ≤0.5% | A measured percentage | Heavy metals | Per element | A figure in mg/kg for each element | Particle size | ≥95% through 40 mesh | The measured percentage through the sieve “Passes specification” is a conclusion the reader should be able to reach from the page. For heavy metals the evidence is a figure per element, not a single total; a summed figure hides the element that failed. ## What moves between batches Between lots, the assay, the colour, the loss on drying and the sieve result move with the crystallisation, the drying step and the milling. The melting point is the narrowest limit on the sheet and the most informative. Racemic alpha-lipoic acid melts at 60–62 °C as a racemic compound; a lot that melts below the range can carry residual solvent, moisture or an impurity, and it can also be enriched in one enantiomer, because a single enantiomer packs differently and melts at its own temperature. Only a chiral test answers the last question. Colour is the least quantitative line. Yellow crystalline powder covers a visible range, and a batch that is noticeably darker or browner can point to heat or light exposure during drying while the assay still passes. Ask for the batch record before rejecting on colour alone. A trend across lots carries more weight than one result near an edge: assay drifting low, loss on drying climbing, or a melting range that is consistently at the bottom of the window. The lot code on the certificate should match the pouch, the drum and the retained sample. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, an optical-form claim the supplier's certificate does not prove, or a disputed result. The useful panel is not a full repeat: HPLC assay and infrared identity, melting point, loss on drying, ICP-MS for the heavy metals, microbiology, and a chiral method if the R-form or the racemic form is being claimed specifically. Elemental sulfur is a useful addition when a dilution is suspected. Ask the laboratory to report its detection limit for each screen. A “not detected” line without a limit is evidence about the method's sensitivity, not about the sample. The sample tested should be the retained sample, and the report should identify the lot. ## What to compare between suppliers Put six lines side by side when comparing suppliers: optical form and CAS number; assay result and basis; melting point; loss on drying; heavy metals and microbiology; pack size and lot code. Two quotations that agree on assay but differ on form or on basis are not describing the same powder. The catalog specification is on the product hub. The tests that separate the racemic grade from the R-form are on the identity page; the market file is on the compliance page; the assay method is described in the HPLC method note; the release workflow is on the quality page. ### 02 Alpha-lipoic acid grades: the optical form comes before the powder URL: https://nutrition.rainwoodbio.com/products/specialty/alpha-lipoic-acid/grades/ Reviewed: 2026-11-19 Alpha-lipoic acid is bought in two optical forms and two practical powder forms. The catalog grade is racemic alpha-lipoic acid, CAS 1077-28-7, a yellow crystalline powder at 99.0–101.0% by HPLC and ≥95% through 40 mesh. R-alpha-lipoic acid, CAS 1200-22-2, is a separate specification with its own assay, enantiomeric purity and label name; granulation changes flow and particle size, not the chemistry. In one lineThe optical form is the first grade decision and the particle size is the second, because the form changes the CAS number and the label while granulation only changes how the powder flows. ## Why one name covers two materials “Alpha-lipoic acid” on a purchase order names a molecule, not a specification. The racemic material contains the R and S enantiomers in equal proportion; the R-form is a single enantiomer with its own CAS number. Both have the formula C8H14O2S2 and the molecular weight 206.33, which is exactly why a certificate reporting only assay and appearance cannot tell them apart. The second decision is physical: the standard 40 mesh powder or a granulated powder. The third is concentration: a diluted trituration is a different specification and a different label, not a grade of the pure material. ## The grades side by side Alpha-lipoic acid grades compared | Property | Racemic powder | Granulated racemic | R-alpha-lipoic acid | CAS number | 1077-28-7 | 1077-28-7 | 1200-22-2 | Optical composition | R and S, about 1:1 | R and S, about 1:1 | The R enantiomer | Assay by HPLC | 99.0–101.0% | 99.0–101.0% | Set on the R-form specification | Melting point | 60–62 °C | 60–62 °C | Its own range; this gate does not apply | Particle size | ≥95% through 40 mesh | Coarser, set by the granulation | As agreed | Label name | Alpha-lipoic acid | Alpha-lipoic acid | R-alpha-lipoic acid | Availability | Catalog grade | On request | Separate purchase The R-form is not a premium version of the same certificate. Its optical purity is a specification line and needs a chiral test to report it; a racemic certificate has no such line because both enantiomers are within its scope. ## Powder, crystal and flow The catalog powder is yellow and crystalline, melts at 60–62 °C, is poorly soluble in water, and dissolves in ethanol and in alkaline solution. The 40 mesh limit means at least 95% of the powder passes a 425 µm sieve; the figure is a finishing specification, so it moves when the mill or the sieve changes without any change in chemistry. Granulation improves flow, reduces dust and can raise bulk density, which helps a tableting line or a sachet fill. It also changes the particle-size distribution and may change the dissolution behaviour, so the specification, the certificate and the process validation have to move together. A granulated lot is still the same molecule; it is not the same powder. A melting point that is close to warm ambient conditions is a handling fact. A bag left in a hot vehicle or against a sunny wall can soften and cake even if it never melts fully, and a caked powder no longer meets its sieve result. ## Dosage form and the label quantity The catalog applications are capsules, tablets and powder blends. Because the material is poorly water-soluble, a drink mix is not a natural fit; if a beverage is wanted, the formulator has to solve the solubility and the solution stability rather than assume the powder disperses. A capsule or tablet uses the 40 mesh powder, or the granulated grade when flow and fill weight control matter. The label quantity is alpha-lipoic acid, not powder weight. At 99.0–101.0% assay, a 100 mg label needs about 99–101 mg of powder before any overage, and the overage decision belongs to the brand and its stability data. For the R-form the arithmetic has a second factor, the enantiomeric purity, because only the R enantiomer counts toward an R-ALA label. Neither calculation is a dose recommendation. ## What to write into the specification Write the grade into the specification rather than leaving it to the order: - “Racemic alpha-lipoic acid, CAS 1077-28-7, C8H14O2S2, molecular weight 206.33.” - “Assay 99.0–101.0% by HPLC; state the basis and the loss on drying on the same sheet.” - “Identification by infrared and HPLC; melting point 60–62 °C.” - “Loss on drying ≤0.5%; heavy metals and microbiology as listed.” - “Particle size ≥95% through 40 mesh, or the agreed granulation profile.” - “Pack, storage condition and retest period for the pack being bought.” ## When the other grade is the wrong choice Do not accept a granulated lot when the process, the stability data and the label were validated on 40 mesh powder; that is a change control, not a packing preference. Do not accept a dilution when the label declares pure alpha-lipoic acid, because the carrier would have to be declared and the powder weight per label dose would double. Do not accept racemic material when the label names R-alpha-lipoic acid, and the R-form is not a drop-in for a file built on the racemic grade. The product hub carries the catalog specification. The level-four comparison takes the optical question through the assay, the chiral test and the label; the COA page shows how the grade is reported; the stability page covers the pack; the identity page gives the tests that separate the forms. ### 02.1 R-alpha-lipoic acid or racemic: the optical form and the label URL: https://nutrition.rainwoodbio.com/products/specialty/alpha-lipoic-acid/grades/r-ala-vs-racemic/ Reviewed: 2026-11-19 Racemic alpha-lipoic acid, CAS 1077-28-7, and R-alpha-lipoic acid, CAS 1200-22-2, are the same molecule in different optical composition: a roughly 1:1 mixture of the R and S enantiomers against a single enantiomer. Both carry C8H14O2S2 and molecular weight 206.33, so assay, infrared and the sulfur figure describe both equally well. The chiral result, the melting behaviour and the label name are what separate them. In one lineThe two forms share a formula, a molecular weight and an assay method, so only a chiral result, the melting behaviour and the label name separate them — and those are exactly the lines the purchase order has to carry. ## Two CAS numbers, one molecule Alpha-lipoic acid has one stereocentre, so the molecule exists as two mirror-image enantiomers. A synthesis that does not control that centre gives both in equal amount; a route that controls it, or a resolution step, gives the R grade. The connectivity is identical, so formula, molecular weight and sulfur cannot tell them apart. Racemic alpha-lipoic acid against R-alpha-lipoic acid | Property | Racemic grade | R grade | CAS number | 1077-28-7 | 1200-22-2 | Formula and molecular weight | C8H14O2S2, 206.33 | C8H14O2S2, 206.33 | Optical composition | R and S, about 1:1; no net rotation | The R enantiomer; dextrorotatory | Melting point | 60–62 °C, the racemic gate | Its own range on its specification | Assay by HPLC | 99.0–101.0% | Its own limit; same achiral method | Optical purity evidence | Not applicable; both enantiomers are in scope | Chiral HPLC or polarimetry; a ratio or ee figure | Label name | Alpha-lipoic acid | R-alpha-lipoic acid ## What the optical form means on a specification The racemic grade is defined by what it is not: a certificate can state the CAS number and the assay with no optical line, because both enantiomers are in scope. The R grade needs a positive statement — an optical purity limit and the method behind it. Polarimetry gives a net rotation; chiral HPLC gives two peaks and therefore a ratio. A name without an optical figure is a name, not evidence. Enantiomeric excess is (R − S) ÷ (R + S) × 100. A lot at 99% ee is about 99.5% R and 0.5% S, not 99% R, which matters when the label declares an R amount. Optical purity is a separate line from the assay, and the two move independently. The R configuration is the one that occurs in nature; the racemic grade is the synthetic mixture most of the category has used. That is chemistry, not a claim about a finished product. ## Why the assay cannot answer the question Reversed-phase HPLC separates by hydrophobicity. The enantiomers have the same hydrophobicity in an achiral mobile phase, so they elute as one peak with the same retention and ultraviolet response. A certificate at 99.5% by HPLC fits the racemic grade, the R grade and any mixture between. Infrared and the 31.1% sulfur figure are the same for both, because the atoms are the same. The melting point moves in one direction only. The catalog sets 60–62 °C for the racemic solid, a racemic compound with its own packing; a single enantiomer packs differently and melts over its own range. So 60–62 °C is evidence about the racemic grade, not a gate that transfers; an R-ALA certificate carrying it is worth a query. A named chiral method closes the question. The HPLC method note explains why an achiral separation cannot resolve an enantiomer pair; the identity page sets the chiral result into the wider evidence. ## Stability: the same chemistry, plus an optical risk Both grades degrade the same way: light and heat drive the dithiolane ring and the colour, moisture raises the loss on drying and softens a powder that melts near warehouse temperatures, and oxygen acts at surfaces and in solution. The R grade is not more stable for being a single enantiomer; the pack and matrix still decide. It does add one failure mode. The optical purity can fall while the assay holds: heat, alkaline pH and a long hold in a basic matrix give the stereocentre a route to lose its configuration. Where the label declares an R amount, the chiral line belongs on the stability protocol, not only on the release certificate. The R grade usually moves in smaller packs, so a kilogram is opened and resealed more often, and each opening is a light and moisture event. The stability page sets out the protocol for the ingredient and the pack. ## The commercial logic, without a price The R grade is more demanding to make, and the reason is the route rather than the molecule. A racemic synthesis makes both enantiomers in one pass; the R grade needs the mixture resolved or the stereocentre controlled, the unwanted S enantiomer is yield that still has to be paid for and disposed of, and the chiral release test is an extra method on every lot. An R quotation is built on its own specification and is not comparable with a racemic one unless pack, assay basis and optical purity limit agree. A comparison by powder weight is the second trap: half of a racemic kilogram is the S enantiomer, so a formula that requires a defined amount of R needs roughly twice the racemic mass before any overage. The comparison belongs at the label dose — powder mass × assay × R share gives the delivered R. A change between the grades is a change control in either direction — new specification line, label, stability file and market check — because the two grades do not share a CAS number. The grades page places this decision beside the particle-size choice. ## What the label and the purchase order have to name The label names the form the file covers. In the United States the Supplement Facts panel names the dietary ingredient, and “R-alpha-lipoic acid” is not the same declaration as “alpha-lipoic acid”. In the EU and Great Britain a product-specific route attaches to a named form, so a racemic file does not automatically cover the R grade. The buyer's regulatory team confirms the route, and the compliance page lists the documents. Delivered R enantiomer at a declared label amount | Powder weighed | Assay | R share | Delivered R | 100 mg racemic alpha-lipoic acid | 99.0–101.0% | About 50% | About 50 mg | 100 mg R-alpha-lipoic acid at a stated 98% ee | Per specification | About 99% of the enantiomers | About 98 mg The arithmetic is not a dose recommendation; it keeps panel, weigh-up and certificate in agreement. A label declaring 100 mg of R-alpha-lipoic acid against a formula built on 100 mg of racemic powder differs by about half of that amount. On the purchase order write the form and CAS number, the assay with its basis, the optical purity limit and its method, the melting-point line that applies, the pack and the retest period. A line reading only “alpha-lipoic acid 99%” leaves the decision to the supplier. The product hub carries the catalog specification; the COA page shows where the optical line sits; the assay glossary entry defines the basis. ### 03 Alpha-lipoic acid is light- and heat-sensitive; the pack sets the shelf life URL: https://nutrition.rainwoodbio.com/products/specialty/alpha-lipoic-acid/stability/ Reviewed: 2026-11-19 Racemic alpha-lipoic acid is sensitive to light and to heat, and its melting point of 60–62 °C is close enough to normal handling temperatures to matter. The sealed powder in a light-resistant pack is the most stable format; an aqueous or alcoholic solution is the least stable. Shelf life is assigned from stability data for the exact pack and storage condition, not from the certificate. In one lineLight starts the damage, heat accelerates it, and a melting point of 60–62 °C puts the powder's physical limit closer to everyday warehouse temperatures than most ingredients. ## The powder: moisture, light and heat The catalog sets loss on drying at ≤0.5%. That is a release gate, not a storage allowance: once the foil pouch is open, the powder can pick up moisture from the air, the as-is assay falls and the powder begins to cake. The yellow colour can deepen, and the characteristic sulfurous note can become more pronounced as degradation products form. A dry store and a tight seal are part of the specification in practice even when they are not printed on the certificate. Light is the second driver. The powder should stay in its original light-resistant pouch or in an opaque container that closes properly. A clear jar on a bench is not a storage container for this material, however convenient it looks. Heat is the third: at the top of a warehouse, in a loading bay or in a vehicle, the powder can approach its melting range, soften and sinter. A sintered powder fails its sieve result and may not disperse in the next process step. ## The solution: the least stable format The material is poorly soluble in water, which limits but does not remove the solution risk. Where a solution is needed, it is usually prepared in ethanol or in alkaline aqueous media, and both are less stable than the solid. Light, oxygen and pH act at once; the dithiolane ring and the carboxyl group are both involved, and the degradation products are not the starting material. A ready-to-drink process adds a heat load through pasteurisation or hot fill that the powder never sees. If a liquid is unavoidable, protect it from light, control the pH, keep dissolved oxygen low and validate the hold time before filling. A bulk-powder stability result does not transfer to a beverage. ## What drives degradation Factors that move alpha-lipoic acid during storage | Factor | What it does | Control | Light | Photodegradation; colour deepens and assay falls | Foil or opaque pack; dark store | Heat | Softening and caking near the melting range; faster degradation | Cool, shaded store; avoid hot vehicles | Moisture | Raises loss on drying; lowers the as-is assay; caking | Sealed pouch; desiccant where needed | Oxygen | Oxidation at exposed surfaces and in solution | Low headspace; sealed pack; process control | pH | Solution stability and solubility both change | Validate the matrix pH and the hold time | Metal ions | Catalyse sulfur chemistry and colour change | Avoid iron and copper contact The factors are not independent. A warm, bright, humid store is worse than the sum of three separate effects, and an alkaline solution in clear glass combines several of them. The useful question is not whether alpha-lipoic acid is stable, but in which pack, at which condition and for how long. ## A stability protocol for the ingredient A useful protocol states the pack, the storage condition, the time points and the tests. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% relative humidity cover the warehouse; accelerated storage at 40 °C/75% relative humidity stresses the pack. A light-exposure arm covers the failure mode that a dark incubator misses, and it should follow a standard photostability design. Test assay by HPLC, melting point, loss on drying, appearance, infrared identity and microbiology at each point. The melting point earns its place in the panel because a shift signals a change in the solid: moisture, a polymorph or a degradation product. The report should show the individual results and identify the pack and the lot family. ## The finished formula changes the answer A capsule or tablet has low water activity, but the shell and the excipients can still transfer moisture. Alkaline excipients, including some mineral salts, raise the pH at the particle surface and can change the local solubility and stability; check the fill's appearance and loss on drying after storage, not only at release. A granulated lot has a different surface area from the 40 mesh powder, so a stability file built on one does not automatically cover the other. A gummy or a stick pack adds water activity, heat and light. A stick pack also depends on the seal: a pinhole is a failure, and the strip should be inspected, not only the powder. The formulator decides whether an overage is needed; that is a label and stability decision, and it does not repair a pack that lets moisture in. ## How the shelf life is set We do not publish a single shelf-life number for alpha-lipoic acid, because the pack and the storage condition set it. The assigned retest period belongs on the specification and is supported by the stability file for that pack. A number without a pack, a condition and a test panel is not a shelf life; it is a claim. After the retest period, re-assay the retained sample before extending use. Do not extend by assumption, and do not carry a bulk figure to a repacked container. The product hub lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the HPLC note describes the assay; the quality page describes the release workflow. ### 04 Alpha-lipoic acid: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/specialty/alpha-lipoic-acid/moq/ Reviewed: 2026-11-19 The MOQ for racemic alpha-lipoic acid is 1 kg, supplied as a 1 kg foil pouch; the standard bulk pack is a 25 kg fiber drum, and a granulated powder is available on request. Lead time is 1–7 days for the standard pack. A firm quotation needs six details: optical form and CAS number, assay and basis, quantity and pack, destination and Incoterm, documents, and the intended market. In one lineOne kilogram is the minimum because it is the smallest pack that can be sampled, tested and traced as its own lot, not because the chemistry needs a bigger batch. ## Why the minimum is 1 kg A 1 kg pack covers a bench trial, a retained sample and an independent identity test. It is also small enough to ship as a parcel, which matters when a formulator needs material before the production plan is fixed. The pack carries a lot code; a scoop from a bulk drum does not. Below 1 kg, material is usually split from a larger lot. The split adds handling, loses the original pack identity and makes traceability harder without changing the chemistry. The 25 kg drum reduces handling per kilogram but commits inventory and a longer storage period, and a longer storage period is a real risk for a light- and heat-sensitive powder. The MOQ is a pack decision, not a volume target. ## Packs and formats Standard alpha-lipoic acid packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Light and moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Particle profile changes; new sieve result The standard powder is ≥95% through 40 mesh. Granulation is a different specification, not a packing choice: it moves the particle-size line, may move the bulk density and should be quoted separately. The foil is the light barrier and the seal is the weak point; a folded-over pouch is not a resealed pack. A low melting point changes the shipping note. A parcel left in a hot vehicle or on a sunny dock can reach temperatures that soften the powder, so the pack should travel shaded and be allowed to equilibrate before opening after any cold storage. ## Lead time and dispatch The standard pack is quoted at 1–7 days from order confirmation. That window covers picking, document preparation and dispatch; it does not include transit, customs clearance or the customer's own quality release. A granulation or a non-standard pack adds time, and the quotation should state it separately. Ask for the dispatch date, not only the lead time. A 25 kg drum may travel on a pallet and a 1 kg pouch as a parcel; the Incoterm decides who books the freight and who clears the entry. The documents should travel with the lot, not after it. ## What a quotation needs Six items make a quotation firm enough to compare: - Product and optical form. Racemic alpha-lipoic acid, CAS 1077-28-7, or R-alpha-lipoic acid, CAS 1200-22-2. - Specification. Assay and basis, melting point, loss on drying, particle size, heavy metals and microbiology. - Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated variant. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, specification, SDS and any market-specific statement the importer needs. - Intended use and market. Supplement, food or another use, and the market where it will be sold. A quotation without the optical form and the market is incomplete. The same word covers two CAS numbers, and the same powder can sit inside one destination's file and outside another's. Commercial terms are stated on the quotation, not on this page. ## The sample is a lot, not a demonstration The 1 kg pack is the qualification sample. Test identity, assay, melting point, loss on drying, particle size and microbiology before scaling, and keep a retained sample from the same pack. The lot code on the sample, the COA and the quotation should match. A sample that cannot be traced to a lot is a demonstration, not a qualification. If a bench trial needs less than a kilogram, discuss it before ordering. A split from a bulk lot is a repack with its own traceability, and it should be documented as such. Do not assume that a bench sample and the production drum will come from the same lot, and do not use the sample to qualify a granulated grade that was never sampled. ## Terms to settle before the first order The quotation sets out the commercial terms, the Incoterm, the pack, the lead time and the documents. The quality terms belong beside them: the specification revision, the COA per lot, the retained sample, the retest period and the change-control route. A quality agreement is worth having before the first production order, not after the first dispute. Returns and replacements follow the quotation and the quality agreement. A lot that fails the agreed specification should be handled through the retained sample and a joint re-test, not through a photograph of the powder. Agree in advance which laboratory will run the referee test and how the result will be shared. The product hub carries the catalog specification; the COA page lists the release tests; the compliance page covers the market files; the MOQ glossary entry defines the term; the logistics page covers shipping and documents. ### 05 The regulatory file for alpha-lipoic acid URL: https://nutrition.rainwoodbio.com/products/specialty/alpha-lipoic-acid/compliance/ Reviewed: 2026-11-19 Racemic alpha-lipoic acid is supplied as CAS 1077-28-7, C8H14O2S2, molecular weight 206.33. The catalog specification is the starting point; the regulatory file is built around the exact optical form, the destination and the finished-product route, and the buyer's regulatory team confirms that route. This page lists the documents and checks that belong in the file so that the specification, the label and the commercial pack can be reviewed together. In one lineThe specification describes the powder; the regulatory file has to show that the named form is allowed, that the dose and contaminants add up, and that the label says the same thing. ## What the file contains A complete file answers four practical questions. What is the material, and which version of the specification is being bought? Which lot is being released, and what does its certificate report? Which limits and label rules apply to the finished product in the destination? What changes if the source, the process or the pack changes? The certificate answers the lot question, the technical data sheet answers the specification question and the safety data sheet answers the handling question; none of them answers the route question alone. The file should also contain an allergen statement, a GMO statement, an origin record, a residual-solvent statement and a statement of the optical form. The material itself is a small molecule, but the carrier and any processing aid can change the allergen answer, so the statement should cover the lot and the pack. ## European Union The EU file is built from the specification, the contaminant results and the label. General food law, labelling and contaminant rules apply alongside any product-specific route; whether a novel-food authorisation, a notification or a history-of-use position applies is a question for the buyer's regulatory team, and the current consolidated text is the reference. As of this review, we do not assert that the material is authorised as a novel food for any market; the buyer confirms the route for the destination. The optical form matters here. A file written around racemic alpha-lipoic acid does not automatically cover R-alpha-lipoic acid, which has a different CAS number and may be named differently in a product-specific entry. If the label says R-ALA, the regulatory citation has to match the R-form, not the racemic grade. ## United States The US file is built around the exact dietary ingredient and its intended use. The supplier should be able to name the basis it relies on and point to the supporting document; the buyer confirms that the basis covers the finished product, the dose and the claim. The Supplement Facts panel names the ingredient, and the optical form should be written out rather than abbreviated. The label and the claim are reviewed separately from the certificate. Where the finished product is a food rather than a supplement, the route is different again, and the intended use has to be stated on the enquiry so the documents match it. ## United Kingdom Great Britain and Northern Ireland are checked separately. The GB file uses the current GB register and GB labelling rules; Northern Ireland follows the EU framework. The buyer's regulatory team confirms which of the two applies and keeps the evidence with the order. Do not carry an EU conclusion across to Great Britain without checking it. ## Contaminants and limits The contaminant panel is a finished-product calculation, not only a drum result. The table is the starting point for a supplement file; the destination text and the daily dose decide the final limit. Contaminant limits to confirm for the finished product | Parameter | Catalog limit | What the file should show | Lead (Pb) | ≤3 mg/kg | Lot result, method, limit and the finished-product calculation | Arsenic (As) | ≤2 mg/kg | Lot result, method and the agreed limit | Cadmium (Cd) | ≤1 mg/kg | Lot result and any category exception that applies | Mercury (Hg) | ≤0.1 mg/kg | Lot result and method The calculation matters because the ingredient is a small fraction of the capsule. A lot that meets the drum limit can still be too high when the daily dose is large, and a lot that is close to the limit leaves no room for a second source in the same formula. ## Label and claims No disease-related claim is made for this material, and none should be inferred from the specification. The claim review belongs to the brand and its regulatory reviewer, who confirm that the wording is allowed for the product, the form and the market. Structure or function wording, the word “antioxidant” and any reference to the R-form are all claim questions, not specification questions. The label must name the form that the file covers. A racemic powder cannot support an R-ALA claim, and an R-form lot cannot be described as plain alpha-lipoic acid if the destination requires the optical form to be declared. A claim does not change the specification, and the certificate does not approve a claim. ## The documents and their versions The file should be a list with versions and dates, not a folder of undated PDFs: - Specification, with the optical form, CAS number and version number. - Certificate of analysis for the lot, with the methods and the results. - Technical data sheet and safety data sheet. - Allergen, GMO, origin and residual-solvent statements. - Statement of the optical form and, for the R-form, the enantiomeric purity result. - Stability summary for the pack being bought. - Packaging declaration, including the liner and the net weight. ## Checklist before the first order - The optical form, CAS number and specification version are named on the order. - The COA, TDS, SDS, allergen, GMO, origin and residual-solvent statements are on file. - The contaminant results are converted to the finished-product dose. - The label names the same form as the regulatory file. - The claim wording has been reviewed for the destination. - The source, process and pack are under change control. - The quotation, the specification and the certificate refer to the same version. The product hub carries the catalog specification; the COA page explains the lot certificate; the identity page covers the analytical evidence; the quality page describes the release file; the EU regulatory notes give the framework references. The glutathione range is a useful comparison for another sulfur-containing ingredient with its own form question. ### 06 How we prove an alpha-lipoic acid lot is the racemic grade URL: https://nutrition.rainwoodbio.com/products/specialty/alpha-lipoic-acid/identity/ Reviewed: 2026-11-19 A racemic alpha-lipoic acid lot is confirmed by four agreeing lines: the document names the form and CAS number, infrared and HPLC identify the molecule, the melting point at 60–62 °C fits the racemic solid, and the assay, loss on drying and sulfur figure close the mass balance. The assay alone cannot separate the racemic grade from the R-form or from a dilution. A chiral test is the only direct evidence of optical composition. In one lineIdentity is four agreeing measurements: the document names the form, infrared and HPLC name the molecule, the melting point says which solid it is, and the mass balance says it has not been diluted. ## The four identity layers A certificate can name the right material and still fail to prove it. The layers below are separate questions, and each one needs its own evidence. A supplier who answers only the first has described the paperwork, not the powder. Four layers of alpha-lipoic acid identity | Layer | Question | Test | What it proves | Document | Is the form named? | Name, CAS number, formula | Paperwork only | Infrared | Are the functional groups present? | IR spectrum against a reference | The molecule class, not the optical form | Chromatography | Is the main peak lipoic acid? | HPLC retention and peak purity | The molecule, not the enantiomer | Melting point | Is it the racemic solid? | Capillary melting range | Solid form, within the other evidence | Mass balance | Is it diluted? | Assay, loss on drying, sulfur | Consistency of the numbers Each layer answers a different question. One who supplies only the assay has measured the molecule without identifying the solid; one who supplies only the specification has not measured the lot at all. ## The sulfur figure and the R:S ratio Two ratios are useful for this material, one elemental and one optical. The elemental ratio is sulfur. The pure molecule is 31.08% sulfur by mass: two sulfur atoms at 32.06 each, divided by the molecular weight 206.33. A lot that assays at 99.0–101.0% by HPLC and reports sulfur close to 31.1% is consistent with the pure acid. A sulfur figure well below that points to a carrier or a dilution; a figure above it points to another sulfur species. The optical ratio is R to S. Racemic material is about 1:1 and shows no net optical rotation; a single enantiomer rotates plane-polarised light and gives one peak on a chiral column. Neither the infrared spectrum nor the melting point replaces that measurement, because both can be consistent with the racemic solid while the optical composition is what the buyer is actually asking about. ## X-ray diffraction: the solid-state check X-ray diffraction answers the solid-state question: is the powder crystalline, and does the pattern match a reference? The racemic compound and a single enantiomer pack differently in the crystal, so their diffraction patterns are not the same, and XRD can support a form dispute that a melting point alone leaves open. It is not a purity assay and it does not measure the optical ratio. XRD is not a routine release test for this product, and a certificate that reports “XRD conforms” without the pattern or the reference has added little. Ask for the reference pattern, the scan range and the detection limit before reading a match statement. For a disputed lot, XRD plus a chiral result plus the sulfur figure is stronger than any one of them. ## What adulteration looks like Common alpha-lipoic acid substitutions and the signals | Adulterant | What it does | Signal | Test | Racemic sold as R-ALA | No optical rotation; wrong claim | Chiral ratio near 1:1; rotation near zero | Chiral HPLC, polarimetry | Carrier or dilution | Lowers assay and sulfur | Assay low; sulfur below 31.1% | Mass balance, elemental sulfur | Oxidised lipoic acid | Extra peaks; colour and odour change | Peak purity fails; assay low | HPLC, IR | Other disulfide | Similar sulfur chemistry, different retention | Extra peak; melting point off | HPLC, melting point, MS | Moisture | Raises loss on drying; lowers the as-is assay | LOD high; dried assay normal | Loss on drying Colour is the weakest signal. Yellow crystalline powder covers a visible range, and a darker lot can be a drying problem rather than a substitution. The stronger signals are the melting point, the sulfur figure and the chiral result. ## How to write the identity into the specification - “Racemic alpha-lipoic acid, CAS 1077-28-7, C8H14O2S2, molecular weight 206.33.” - “Assay 99.0–101.0% by HPLC; state the basis and the loss on drying.” - “Identification by infrared and HPLC; melting point 60–62 °C.” - “Loss on drying ≤0.5%; sulfur about 31.1% where the mass balance is required.” - “Particle size ≥95% through 40 mesh; heavy metals and microbiology as listed.” - “Optical form stated on the certificate; chiral result for any R-form claim.” ## Six questions for the supplier - Which optical form is this lot, and which CAS number is on the certificate? - Can you provide the infrared spectrum and the HPLC chromatogram, not only the assay percentage? - What melting range was measured, and what were the start and end temperatures? - What is the loss on drying and the sulfur result for this lot? - If the form is disputed, will you provide a chiral HPLC or polarimetry result? - Will you accept a joint re-test on the retained sample? Six direct answers amount to an identity file; a single assay percentage does not. The product hub carries the catalog specification; the COA page shows where each figure sits on the certificate; the grades page compares the forms; the level-four comparison covers the label consequences; the HPLC method note explains the separation. ### 01 What the COA for yeast beta-glucan actually contains URL: https://nutrition.rainwoodbio.com/products/specialty/beta-glucan/coa/ Reviewed: 2026-11-19 A yeast β-glucan certificate is readable when every line pairs a test with its procedure and a release limit with the lot's measured value. The β-glucan result should come from a named enzymatic procedure, with moisture, ash and protein reported beside it. The ≥70% value in the catalog is a specification; the COA belongs to one lot and one pack. In one lineA β-glucan percentage is a method-dependent number: the certificate must name the enzymatic procedure, report moisture and ash on the same page, and show the measured result apart from the release limit. ## The certificate as a test report Start with the identity block: material name, yeast source, CAS 9041-22-9, formula (C6H10O5)n. Then read the test rows. A row is auditable when it states what was run, by which procedure, and against which limit. “Conforms” on its own is a conclusion, and the reader cannot check it. Release tests for yeast β-1,3/1,6-glucan | Test | Procedure | Limit | Appearance | Visual examination | Off-white to light brown powder | Identification | Enzymatic and HPLC comparison with the reference | Conforms | β-Glucan | Enzymatic assay; kit or enzyme sequence named | ≥70% | Moisture | Gravimetric drying | ≤6.0% | Ash | Residue after ashing | ≤3.0% | Protein | Nitrogen determination, Kjeldahl or Dumas | ≤5.0% | Heavy metals | ICP-MS, element by element | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate counts and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent ## The assay basis, moisture and the mass balance The β-glucan line is not a total-glucose line. The procedure releases glucose from β-linked glucan, measures it, and corrects for the α-glucan fraction obtained in a separate digestion. The certificate should identify the enzyme preparation or kit, because a cereal β-glucan method and a yeast cell-wall method use different enzymes and extraction steps. Without that identification, 70% is a percentage of an undefined measurement. The basis is the second half of the definition. A result on the powder as received and a result on the dried solids are different figures whenever moisture is present. At 6.0% moisture, 70.0% as-is corresponds to about 74.5% on the dried basis; the same analytical run can be reported either way. The certificate should say which basis was used in the assay row, and the moisture result beside it should let the reader repeat the calculation. The mass balance is the third check. β-glucan, moisture, ash and protein account for most of the powder, with cell-wall residue, lipid and minor carbohydrate making up the rest. At 70% β-glucan, 6.0% moisture, 3.0% ash and 5.0% protein, about 16% remains for those fractions. A much wider gap is a reason to ask what else is in the powder. ## Release limit versus batch result The limit is a gate; the result is a measurement. A certificate that prints the gate in both columns has reported the specification, not the lot. Each result should carry its unit, and the method should sit next to the figure it produced. How the result column should differ from the limit | Test | Limit | Result expected on the COA | β-Glucan | ≥70% by the named enzymatic method | The measured percentage, with basis and method | Moisture | ≤6.0% | The measured percentage | Ash | ≤3.0% | The measured percentage | Protein | ≤5.0% | The measured percentage and the nitrogen factor used | Heavy metals | Element-specific limits | One figure per element, in mg/kg | Microbiology | Counts and absence statements | The count and the absence finding for the lot Microbiology and heavy metals are where summarising does the most damage. A single “heavy metals pass” line hides which element was close to its limit. A microbiological “pass” without the count and the absence finding cannot be compared with the next lot. ## What moves between batches Yeast strain, fermentation time, cell-wall washing, dryer temperature and mill settings all leave a trace on the certificate. The first three move protein, ash and colour; the dryer moves moisture; the mill moves particle size and bulk density without touching the β-glucan content. A specification that folds all five into one “process” cannot explain a shift. Colour deserves separate attention. Off-white to light brown is broad enough to absorb normal lot-to-lot variation, so a shade change inside the range is not proof of a defect. A powder that turns markedly darker can reflect a hotter dryer, a longer hold or a reaction involving the protein fraction. Re-test moisture and β-glucan before drawing a conclusion from appearance alone. Look for direction across several lots, not just a single result near an edge. β-glucan that drifts down, protein or ash that climbs, or a new feature in the sugar profile is more informative than one number that barely passes. The lot code should connect the certificate, the pack and the retained sample. ## When to order an outside test An independent laboratory is worth using for a new yeast source, a first shipment to a regulated market, a certificate that does not explain its method, or a result in dispute. The outside panel should add a second view rather than repeat the supplier's sheet: a second enzymatic β-glucan result with the procedure named, moisture, ash and protein, ICP-MS for each metal, microbiology, and an HPLC sugar profile that can reveal a glucose or maltodextrin carrier. Require a detection limit for every screen. “Not detected” without a limit describes the laboratory's sensitivity, not the absence of the substance. If the source itself is questioned, add a linkage analysis or a microscopy examination; neither is a routine release test, but each answers a question that a percentage cannot. Traceability runs from the retained sample to the report. The laboratory should receive the sealed retained sample and the lot code, and the report should name both. In a dispute, the referee needs the sample, the supplier's certificate and the agreed specification, and the tests chosen should separate the source or the method rather than repeat the same assay. ## What to compare between suppliers A supplier comparison needs six columns: yeast source and strain; linkage stated as β-1,3/1,6; β-glucan result with method and basis; moisture, ash and protein; heavy metals and microbiology; pack size and lot code. Two certificates that both say 70% but name different methods have not established equivalence. Traceability is the second layer. The file should identify the manufacturer, the fermentation and cell-wall process, and the drying and milling steps. For the catalog figures, start at the beta-glucan product hub. The structural checks are set out on the identity page; the claim and market questions are on the compliance page; the analytical procedures are described in the methods library; the release steps are on the quality page. The chitosan page is a parallel file for another source-dependent polymer. ### 02 Beta-glucan grades: yeast, oat and mushroom are different materials URL: https://nutrition.rainwoodbio.com/products/specialty/beta-glucan/grades/ Reviewed: 2026-11-19 β-Glucan is a family name, not a specification. Yeast β-1,3/1,6-glucan, oat β-1,3/1,4-glucan and mushroom β-1,3/1,6-glucan share a glucose backbone but differ in linkage, solubility, assay response and the claim that can be made. The catalog grade here is the yeast-derived 1,3/1,6 material at ≥70% by enzymatic assay. In one lineThe source and the linkage are the grade: they decide the assay, the viscosity and the claim before the percentage does. ## Why beta-glucan is not one grade The name describes a polymer of glucose joined by β-glycosidic bonds. It does not describe which carbons carry the bond. A β-1,3 chain with β-1,6 branches, a mixed β-1,3/1,4 chain and a β-1,4 cellulose chain are all β-linked glucans, and they behave differently in water, in an assay and in a regulatory file. The generic CAS number 9041-22-9 and the formula (C6H10O5)n do not narrow the choice. A purchase order that names “β-glucan 70%” has therefore not specified the material. It has named a family and a number. The source, the linkage and the method have to be written beside that number before the specification is complete. ## The grade families side by side β-Glucan families and what changes between them | Source | Main linkage | Commercial form | What it changes | Yeast, Saccharomyces cerevisiae | β-1,3 backbone with β-1,6 branches | Cell-wall extract; ≥70% by enzymatic assay | Protein, ash, colour, dispersion; the catalog grade | Oat | Mixed β-1,3/1,4 | Soluble fibre concentrate | Viscosity, water solubility, cereal claim | Barley | Mixed β-1,3/1,4 | Soluble fibre concentrate | Same linkage family as oat, separate source record | Mushroom | β-1,3 with β-1,6 branches | Fungal extract, often chitin-associated | Chitin, protein, insolubles; allergen and source record The table is a map, not a ranking. Each family has its own specification and its own analytical method. A yeast result and an oat result can both read “70%” and still describe different polymers, different methods and different claims. ## Dispersion, viscosity and the powder in the mixer Yeast β-glucan is dispersible in water and forms a viscous suspension at higher concentrations; it is not a clear soluble fibre. The cell-wall particles swell and settle, so a drink or a stick pack needs a dispersion step and, often, a suspending agent. Oat β-glucan is the soluble, viscous family: a small concentration thickens water noticeably, and that viscosity is part of its functional and regulatory story. Mushroom extracts can carry chitin, which is insoluble and settles hard. Granulation changes flow, dust and bulk density, not the β-glucan content. Particle size matters for capsule filling and for dispersion in a stick pack, and it belongs in the specification beside the assay. A coarse granule that flows well can be the right choice for a capsule line and the wrong choice for a drink mix that must suspend quickly. ## Choosing a grade for the dosage form Capsules and tablets are filled by weight, so the fill has to be sized from the β-glucan figure. At ≥70% on an as-is basis, a 500 mg fill delivers at least 350 mg of β-glucan; to declare 500 mg of β-glucan, the formulator needs about 715 mg of powder at 70%. The arithmetic is not a dose recommendation; it is the conversion that keeps the label, the fill weight and the assay in agreement. Check the basis before using the factor. A 70% result on the dried basis is not 70% of the powder as weighed when the moisture is 6.0%; convert with the moisture first, then size the fill. For a stick pack or a drink mix, the grade also has to disperse and stay suspended, so the particle-size line and the viscosity of the finished drink belong in the trial. The claim follows the source, not the percentage. The EU claim associated with β-glucans is written for oat and barley β-glucan and a defined daily intake; a yeast 1,3/1,6 ingredient does not inherit that wording. The yeast versus oat comparison sets out the linkage and claim consequences in full. ## What to write into the specification - “Yeast-derived β-1,3/1,6-glucan, CAS 9041-22-9, (C6H10O5)n, from Saccharomyces cerevisiae.” - “β-Glucan ≥70% by the named enzymatic method; state as-is or dry basis.” - “Moisture ≤6.0%; ash ≤3.0%; protein ≤5.0%.” - “Identification by enzymatic and HPLC methods conforming to the reference.” - “Heavy metals and microbiology as listed; particle size agreed for the dosage form.” - “No added maltodextrin, glucose or other carrier unless declared and quantified.” The last line is not decoration. A carrier can lift the powder mass and dilute the β-glucan without changing the appearance, and the assay will show it only if the method counts the carrier as glucose or if the sugar profile is read. Name the carrier or exclude it in the specification. ## When the yeast grade is the wrong choice Choose another family when the claim depends on oat or barley β-glucan, when the formula needs a soluble fibre rather than a cell-wall dispersion, or when the market file names a different source. Those are different materials, not alternative packs of the same powder. The reverse is also true: an oat concentrate is not a drop-in for a yeast cell-wall product in a capsule, because the mass, the dispersion and the claim all move. We supply the yeast-derived 1,3/1,6 grade. Catalog figures are on the beta-glucan hub; the COA page shows how the assay is reported; the compliance page explains the claim framework; the chitosan page offers a parallel for another cell-wall or shell-derived polymer; the methods library describes the assays; the quality page covers the release workflow. ### 02.1 Yeast vs oat beta-glucan: source, linkage and the claim URL: https://nutrition.rainwoodbio.com/products/specialty/beta-glucan/grades/yeast-vs-oat-beta-glucan/ Reviewed: 2026-11-19 Yeast β-glucan is a branched β-1,3/1,6 polymer from the yeast cell wall; oat β-glucan is a mixed β-1,3/1,4 polymer from the cereal endosperm. They share a glucose backbone but differ in linkage, water solubility, viscosity, assay response and the regulatory claim. A yeast result and an oat result cannot be compared without the source and the method. In one lineBoth are β-glucan, but the linkage decides the viscosity, the assay and the claim: yeast 1,3/1,6 is not oat 1,3/1,4. ## Where each beta-glucan comes from Yeast β-glucan is recovered from the cell wall of Saccharomyces cerevisiae. The fermentation produces the biomass, and the cell-wall separation, washing and drying steps produce the extract. The protein, ash, colour and β-glucan figure move with those steps, which is why the source record belongs in the specification. The catalog grade on this site is this yeast-derived material, CAS 9041-22-9. Oat β-glucan comes from the endosperm cell wall of the cereal and is sold as a soluble fibre concentrate. Barley is the other cereal source in the same linkage family. Mushroom β-glucan is a third source, usually β-1,3/1,6 and often associated with chitin. The name “β-glucan” does not say which of these is in the drum; the source record does. ## The linkage difference The linkage is the chemical fact behind every other difference on this page. A β-1,3 chain with β-1,6 branches is a different polymer from a chain that alternates β-1,3 and β-1,4 units. The first is branched and tends to be less soluble; the second is linear and soluble, and it thickens water at low concentration. Linkage and behaviour of the main glucan families | Material | Main linkage | Water behaviour | Assay consequence | Yeast β-glucan | β-1,3 backbone with β-1,6 branches | Disperses; viscous suspension at higher solids | Yeast cell-wall enzymatic method | Oat β-glucan | Mixed β-1,3/1,4 | Soluble; thickens at low concentration | Cereal β-glucan enzymatic method | Barley β-glucan | Mixed β-1,3/1,4 | Soluble; viscosity depends on molecular weight | Cereal β-glucan enzymatic method | Cellulose | β-1,4 | Insoluble | Not the same substrate | Starch | α-1,4 with α-1,6 branches | Disperses or gelatinises | α-Glucan, subtracted in the β-glucan assay Cellulose and starch are in the table because they are the two glucose polymers most likely to be confused with β-glucan in a warehouse or a blend. Cellulose is β-linked but not the 1,3/1,6 polymer; starch is α-linked and belongs to a different assay fraction. ## Why oat thickens and yeast disperses Oat β-glucan is the soluble, viscous family. At the same solids, an oat concentrate raises viscosity far more than a yeast cell-wall powder, and that viscosity is part of the functional and regulatory story for oat and barley. Yeast β-glucan disperses into a suspension; the cell-wall particles swell and settle, and a drink needs a dispersion step and often a suspending agent. Viscosity is not a purity measure. It depends on concentration, molecular weight, particle size, shear and temperature. A yeast powder and an oat concentrate at the same “β-glucan” percentage are not interchangeable in a beverage, because the mouthfeel, the stability of the suspension and the process all change. A formulator who switches source has to rebuild the trial, not only the label. ## The method decides the number The enzymatic assay is specific to the substrate and the enzyme set. A cereal β-glucan method is built around the mixed 1,3/1,4 linkage; a yeast cell-wall method uses a different hydrolysis and extraction sequence. The certificate must name the method or the kit, and it must state whether the result is as-is or dry basis. A 70% yeast result and a 70% oat result are not the same measurement, even when both are correct. HPLC does not settle the question on its own. A monosaccharide profile after hydrolysis shows glucose for every glucan in the table; a size-exclusion method gives a molecular-weight distribution, which is informative but not a source identity test. Linkage analysis by methylation and gas chromatography, or by NMR, is the structural test that separates 1,3/1,6 from 1,3/1,4. It is used to qualify a source or settle a dispute, not to release every lot. ## What can be said, and by whom Health claims are restricted. In the EU, a health claim needs an authorisation and an entry in the EU Register; the beta-glucan claim that appears there is written for oat and barley β-glucan and a defined daily intake. A yeast 1,3/1,6 ingredient does not inherit that wording, even when its assay figure is higher. In the United States, a structure/function statement and a health claim follow different routes, and a disease claim is outside the supplement framework. Some markets have a product-specific entry for a defined yeast β-glucan; confirm the current text and the conditions attached to it. The buyer's regulatory team confirms the route for the destination, the finished product and the wording. The compliance page sets out the documents and the claim review in full. ## When to choose yeast and when to choose oat Choose yeast β-glucan when the formula needs a cell-wall-derived powder for a capsule, tablet or stick pack, and the label names the yeast source. Choose oat β-glucan when the product needs a soluble, viscous fibre or when the claim depends on the oat or barley linkage. The choice is a source decision, not a percentage decision. We supply the yeast-derived 1,3/1,6 grade. Oat β-glucan is a different purchase with a different specification, method and claim. A switch in either direction needs a new specification, a new label and a fresh claim review, not a substitution at the balance. Catalog figures sit on the beta-glucan hub; the grades page covers the other source families; structural tests are on the identity page; the chitosan page offers a parallel for another source-dependent polymer; analytical and release detail is in the methods library and on the quality page. ### 03 Beta-glucan stability: moisture, heat and the pack URL: https://nutrition.rainwoodbio.com/products/specialty/beta-glucan/stability/ Reviewed: 2026-11-19 Dry yeast β-glucan shows little chemical loss in storage; the changes that matter are moisture uptake, caking, colour drift and, in a liquid, viscosity loss and microbial growth. The sealed pack limits the first three, and the process controls the last two. A shelf life is a property of the pack and the storage condition, not of the polymer alone. In one lineDry β-glucan is chemically patient; the pack has to keep it dry, sealed and clean, and any liquid format needs its own stability work. ## The powder: water, lumps and colour The catalog moisture limit is ≤6.0%. That is a release gate, not a licence to leave the pouch open. Once air reaches the powder, moisture climbs, the as-is β-glucan percentage falls by dilution, and the particles can fuse into lumps that disperse poorly. A folded-over foil pouch is not a seal; a heat-sealed pack that has been cut open should be closed with a proper clip or transferred to a smaller dry container. Colour moves more slowly than moisture, and it is not a reliable assay. The off-white to light brown range covers normal variation, so a small shade change is not a failure. A clearly darker powder can reflect a hot dryer, a long hold, or a reaction between the protein fraction and residual sugars. When colour changes, re-check moisture and β-glucan before deciding whether the lot is still usable. Ordinary warehouse temperatures are tolerable for a sealed pack; a hot loading bay, a car in summer or a leaking roof is not. If a pack has been cold, let it reach room temperature before opening so that condensation does not form on the powder. ## A dispersion, not a solution In water the powder disperses into a suspension, and at higher solids it becomes viscous. That viscosity is a functional property, not a purity reading: it depends on concentration, particle size, shear history and temperature. Measure it at a fixed solids level if it is going to be a specification, otherwise two results cannot be compared. Water also makes the product a microbial substrate. An unpreserved dispersion can support bacteria, yeasts and moulds, and a pasteurisation or hot-fill step reduces the load while adding heat. The preservative system, the pH and the hold time before filling all need validation in the finished matrix. A clean powder COA does not make a liquid stable. A beverage trial should use the real process, not a bench stir. The heat load, the pump shear, the fill temperature and the pack all influence viscosity and microbial outcome. The yeast versus oat comparison explains why an oat concentrate thickens at lower solids and why the two sources cannot be swapped in a drink without rebuilding the trial. ## What changes during storage Storage variables for yeast β-glucan | Variable | Effect | Control | Water | Dilutes the as-is assay; causes caking and clumping | Sealed pack, dry room, closed liner | Temperature | Speeds colour change and moisture movement | Ambient store away from hot surfaces | Microbes | Multiply in a wet powder or an unpreserved liquid | Dry pack; validated preservation and heat step | Shear | Reduces viscosity in a dispersion | Set pump and homogeniser conditions | pH | Can degrade the polymer at extremes | Validate matrix pH and hold time | Pack damage | A pinhole admits water vapour and air | Inspect seams; store off the floor The variables reinforce one another. A humid store plus a damaged liner is worse than either alone, and a warm, acidic drink combines chemical and microbial risk. The productive question is not whether the polymer is stable in principle, but how long this pack keeps this specification under this storage condition. ## Designing the stability trial Before the first sample enters the chamber, settle four points: which pack is being tested, where it will be stored, when it will be pulled, and what will be measured. A common design uses a warehouse arm at 25 °C and 60% relative humidity, an intermediate arm at 30 °C and 65% relative humidity, and an accelerated arm at 40 °C and 75% relative humidity. Clear jars, tropical destinations or a retort step need an arm that those chambers do not supply. At each point, test β-glucan by the named enzymatic procedure, moisture, ash, protein, appearance and microbiology. If the material is sold as a dispersion, add viscosity at a fixed solids level. Report the individual values rather than a single pass statement; a trend is more useful than a verdict, and the report should name the pack and the lot family. Order the study on the commercial pack. Headspace, exposed surface and opening frequency are not the same for a 1 kg pouch and a 25 kg drum, so data from one cannot be read across to the other. ## Capsules, sticks and drinks Capsule shells and tablet excipients are not perfectly dry, and water can migrate into the fill during storage. Release and end-of-storage moisture results, plus a visual check for caking, are the minimum. In a stick pack the seal is an additional failure point: inspect the strip for pinholes, not only the powder inside. A drink adds water, pH, heat and microbial risk. The bulk ingredient's stability is only the starting point. An overage may be a legitimate label decision, but it does not compensate for a pack that leaks or a process that leaves the drink unpreserved. ## Where the retest period comes from There is no single shelf-life figure for β-glucan. The retest period is written against a named pack and a named storage condition, and the file behind it has to show the test panel and the time points. Strip away the pack and the condition and what remains is a claim, not a shelf life. When the retest period expires, test the retained sample again before extending it. An extension needs a result; a drum's history cannot be transferred to a pouch that was repacked later. Pack options are listed on the beta-glucan hub; release tests are on the COA page; ordering details sit on the MOQ page; the methods library explains the assays; the quality page describes how a lot is released. A parallel polymer file is on the chitosan page. ### 04 Beta-glucan MOQ: 1 kg pouch, 25 kg drum and what a quote needs URL: https://nutrition.rainwoodbio.com/products/specialty/beta-glucan/moq/ Reviewed: 2026-11-19 The smallest order is 1 kg, packed in a foil pouch; the bulk format is a 25 kg fiber drum, and the standard lead time is 1–7 days. A usable quotation has to state the yeast source, the β-glucan method and basis, the pack and quantity, the destination and Incoterm, the documents, and the market. In one lineOne kilogram is the floor because a β-glucan order must be a lot with a code and a retained sample, not a scoop divided from a drum. ## Why the floor is one kilogram A kilogram is enough to run a bench trial, keep a retained sample and send a portion to an independent laboratory. It also travels as a parcel, which helps a formulator who needs material before the production plan is signed. The pack has its own lot code and certificate, so the trial material and the eventual production material can be discussed as lots rather than as anonymous powder. Smaller quantities are usually split from a larger lot and repacked. The repack adds handling, breaks the link to the original pack and makes a dispute harder to resolve, while the chemistry stays the same. A 25 kg drum lowers the handling effort per kilogram, but it also ties up inventory and extends the storage period. The minimum is a packing decision, not a volume incentive. ## Pack formats Pack formats for yeast β-glucan | Format | Net weight | Usual role | Points to note | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Liner required; code on both drum and liner | Granulated powder | On request | Flow and dust control | Different particle profile; confirm before quoting The catalog product is a free-flowing powder. Granulation is a change to the particle-size specification, not a different bag: it alters flow, dust and dispersion time, and it can add time to the order. A capsule line that wants a coarser granule and a stick pack that needs fast dispersion are asking for different things, so the request should reach the quotation, not the purchase order. ## Lead time and dispatch The 1–7 day window starts at order confirmation and ends at dispatch. It covers picking, the documents and handover to the carrier, not the transit, the customs entry or the customer's own quality release. A granulated grade or a non-standard pack adds its own time, which should appear as a separate line on the quotation. Ask for a dispatch date rather than a lead time alone. A drum can travel on a pallet and a pouch as a parcel; the trade term fixes who arranges the freight and who handles the import clearance. Documents should accompany the lot; a certificate that arrives after the material delays the release. ## What a quotation needs Six details make two offers comparable: - Source and identity. Yeast-derived β-1,3/1,6-glucan, CAS 9041-22-9, with the yeast named. - Specification and method. The β-glucan limit and enzymatic procedure, the basis, moisture, ash, protein and the contaminant panel. - Quantity and packing. 1 kg pouch, 25 kg drum, or a granulated grade. - Destination and Incoterm. Country, port or address, and the trade term. - Documents. COA, specification, SDS, source statement and any declaration the importer needs. - Intended use and market. Which use is intended — supplement, food or other — and the country of sale. An offer that omits the source and the method is not comparable with one that includes them, even if both quote the same percentage. Commercial terms are not published here; they belong in the quotation, where the pack and the destination are known. ## The qualification sample The 1 kg pouch is the qualification sample. Test identity, β-glucan by the named procedure, moisture, ash and microbiology before scaling, and keep a portion from the same pack. The sample's lot code should be repeated on the COA and on the quotation; a sample without one is a demonstration, not a qualification. A bench trial that needs less than a kilogram should be discussed before the order. Dividing a bulk lot creates a repack, and the repack needs its own trace record and its own description. The production drum and the bench sample may come from different lots, and the trial report should say which lot it used. ## Terms to settle before the first order The quotation fixes the trade term, the pack, the dispatch window and the document set. The quality terms belong beside them: the revision number, one COA per lot, the retained sample, the retest period and the route for changing any of them. Negotiating a quality agreement before the first production order is easier than repairing one after a dispute. Returns and replacements should follow the quotation and that agreement. If a lot fails the agreed specification, the evidence should be a joint re-test on the retained sample, not a photograph. Decide in advance who pays for the referee laboratory and which laboratory both sides accept. Catalog figures are on the beta-glucan hub; release tests are described on the COA page; the market file is outlined on the compliance page; the MOQ glossary entry defines the term; the methods library explains the assay; the quality page describes the release sequence. The chitosan page covers a related specialty polymer. ### 05 The regulatory file for yeast beta-glucan URL: https://nutrition.rainwoodbio.com/products/specialty/beta-glucan/compliance/ Reviewed: 2026-11-19 Yeast β-glucan sits where a food ingredient, a supplement ingredient and a claim meet. The file has to show the source, the method and the lot, and then show how the destination market permits the material and the wording. Health claims are restricted, so the buyer's regulatory team confirms the route for the product and the market. In one lineA β-glucan file is source-specific: the yeast record, the enzymatic method and the claim must match the market, and no certificate can settle that question alone. ## What the file contains Think of the file as a chain with four links. The first names the material and the specification revision being bought. The second identifies the lot and reports what its certificate measured. The third applies the destination's limits, labelling rules and claim rules to the finished product. The fourth records what happens when the yeast, the process or the pack changes. A COA answers the lot link, a technical data sheet answers the specification link, and a safety data sheet covers handling. None of the three answers the market link. For this material the source record is part of the chain, not an appendix. The file should identify the yeast, the fermentation and the cell-wall separation, because the β-glucan figure alone does not say whether the powder is a yeast extract, an oat concentrate or a fungal preparation. The analytical procedure belongs in the same record: a percentage without its method cannot be reviewed. ## European Union EU food law starts with responsibility: the operator that places the material on the market must be able to show that it is safe and correctly described. Regulation (EC) No 178/2002 and the labelling rules in Regulation (EU) No 1169/2011 set that frame. Contaminants are controlled through Regulation (EU) 2023/915, which replaced the earlier consolidated regulation; the version in force on the shipment date is the one that matters, not a summary from an older file. Novel-food status is a separate question and must be answered for the destination. Some markets have a product-specific entry for a defined yeast β-glucan; confirm the current text and the conditions that go with it. The buyer's regulatory team makes that call. A supplier's statement that the powder is “food grade” is a quality statement, not a novel-food route. ## United States In the US the usual framework is the dietary-supplement route, with the finished product manufactured under the cGMP rules in 21 CFR 111. If the ingredient was not on the market as a dietary ingredient before 1994, a new dietary ingredient notification under 21 U.S.C. 350b may be needed. The supplier ought to identify the basis it depends on and show the document behind it; an offer that leaves this to the buyer is incomplete. The Supplement Facts panel names the ingredient as sold, including its source and quantity. A structure/function statement carries its own rules and disclaimer, and a health claim goes through a different review. The buyer checks that the basis covers the finished product, the dose and the exact wording. Approval of a claim is not part of the certificate. ## Contaminants and limits Contaminant compliance is calculated on the finished product, not only on the drum. The values below are the catalog gates; the destination text and the daily dose determine the final limit that applies. Contaminant and microbiology limits for the finished-product review | Item | Catalog gate | Evidence the file should hold | Lead (Pb) | ≤3 mg/kg | Lot result, analytical method and dose calculation | Arsenic (As) | ≤2 mg/kg | Lot result and the market-specific limit | Cadmium (Cd) | ≤1 mg/kg | Lot result and the source record | Mercury (Hg) | ≤0.1 mg/kg | Lot result and method | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Counts and absence findings for the lot | Moisture and ash | Moisture ≤6.0%; ash ≤3.0% | Measured figures beside the β-glucan result ## Label and claims Health claims are restricted. In the EU a health claim must be authorised and appear in the EU Register under Regulation (EC) No 1924/2006. The beta-glucan claim found there is written for oat and barley β-glucan and a defined daily intake. A yeast 1,3/1,6 ingredient does not inherit that wording merely because its assay is high. The buyer's regulatory team decides whether any claim is available for this source, this product and this destination. In the US, a structure/function statement and a health claim are reviewed on different tracks, and a disease claim falls outside the supplement framework. The label should name the material and its source accurately, and the claim review belongs in the label file. A claim cannot rewrite the specification, and a COA cannot authorise a claim. ## Documents the file needs - Lot COA with the β-glucan procedure, the basis and the contaminant results. - Current technical data sheet and the specification revision it belongs to. - Safety data sheet for handling and transport. - Source record covering yeast strain, fermentation and cell-wall separation. - Allergen statement for the fermentation source and any carrier, plus a GMO statement. - Origin statement and, where relevant, a residual-solvent statement. - A method description that another laboratory could repeat. - Food-grade statement and the heavy-metal and microbiology findings. Version numbers turn a pile of PDFs into a file. If a statement is missing for a lot, identify the gap before the order is placed; discovering it during import clearance is more expensive. ## Checklist before the first order - Specification revision, CAS 9041-22-9, yeast source and linkage are written down. - The β-glucan procedure and basis agree across specification, COA and label. - Contaminant figures are recalculated for the daily dose of the finished product. - The buyer's regulatory team has recorded the route for the destination. - Label, source description and claim have been reviewed as one package. - Yeast, process and pack are under change control. Catalog figures are on the beta-glucan hub; the lot certificate is explained on the COA page; the analytical evidence is on the identity page; the chitosan page shows a parallel file for another source-dependent polymer; the methods library describes the tests; the quality page covers the release file. ### 06 How we prove a beta-glucan lot is yeast 1,3/1,6-glucan URL: https://nutrition.rainwoodbio.com/products/specialty/beta-glucan/identity/ Reviewed: 2026-11-19 A β-glucan lot is yeast 1,3/1,6-glucan when four things agree: the source record names the yeast and the cell-wall process, the enzymatic assay reports β-glucan by a named method, the sugar and linkage profile is consistent with a 1,3/1,6 polymer, and the mass balance leaves no room for a carrier. The assay alone cannot separate yeast from oat, because both are glucose polymers. In one lineIdentity is source plus linkage plus method: the assay measures glucose, while the source record and the linkage pattern say which β-glucan it is. ## The four identity layers A correct name on the certificate does not prove the powder. Each layer below answers a different question, and each needs its own evidence; an answer that stops at the first layer describes paperwork rather than material. Four layers of yeast β-1,3/1,6-glucan identity | Layer | Question | Evidence | What it proves | Document | Are the source and linkage named? | Name, CAS 9041-22-9, yeast strain, specification | Paperwork only | Assay | How much β-glucan is present? | Named enzymatic method, with the basis | The β-glucan figure | Structure | Is it a 1,3/1,6 polymer? | Sugar profile, linkage analysis, spectroscopy | The linkage family | Mass balance | Is it diluted or extended? | Moisture, ash, protein, sugar profile | Consistency of the numbers ## The 1,3 to 1,6 linkage ratio Yeast β-glucan has a β-1,3-linked backbone with β-1,6-linked branches. The ratio of the two linkage types is a structural descriptor: it varies with the yeast fraction, the extraction and the analytical method, and it is not a fixed label claim. The catalog specification names the linkage family; a lot-specific ratio is an additional structural test, not a routine release line. The enzymatic assay does not report that ratio. It hydrolyses β-linked glucan to glucose and reports the total, so a yeast 1,3/1,6 polymer and an oat 1,3/1,4 polymer can both produce a glucose figure under a suitable enzyme set. Linkage analysis by methylation and gas chromatography, or by NMR, is what separates the families. Those methods are slower and more expensive than the release assay, and they are used to qualify a source or settle a dispute rather than to release every lot. HPLC is a third view. A monosaccharide profile after hydrolysis confirms that glucose is the constituent sugar; a size-exclusion method gives a molecular-weight distribution. Neither is a source test on its own. A certificate that reports “HPLC conforms” without saying what the HPLC measured has added a word, not a result. ## X-ray diffraction: what it can and cannot show β-Glucan is largely amorphous, so its X-ray diffraction pattern is broad rather than a set of sharp reflections. XRD cannot identify the yeast source, and it cannot measure the β-glucan content. It can show that a crystalline phase is present, which is useful when a carrier such as dextrose, sucrose, lactose or a mineral filler is suspected, and it can compare the solid form of two lots. XRD is not a routine release test for this product. Request the reference pattern and the detection limit before accepting a statement that the pattern matches, and read a positive crystalline phase as a question about the formulation rather than a verdict on the β-glucan. The XRD method note describes the instrument and the sample preparation. ## What adulteration looks like Common β-glucan substitutions and the signals | Substitute | Effect | Warning sign | Check | Maltodextrin or glucose | Raises bulk without adding β-glucan | β-glucan below expectation; extra glucose in the profile | Enzymatic assay plus HPLC sugar profile | Oat or mushroom β-glucan | Supplies glucose under the same name | Source record inconsistent; linkage pattern differs | Linkage analysis and source audit | Cellulose | β-1,4 glucan used as bulk | Insoluble residue; recovery changes | Linkage analysis and microscopy | Starch | α-glucan, outside the β-glucan definition | α-glucan fraction high | Separate α-glucan digestion | Protein or ash filler | Adds mass; shifts the balance | Protein or ash over the limit | Nitrogen determination and ashing | Moisture | Lowers the as-is result | Moisture high; dry-basis figure normal | Loss on drying Colour is the weakest signal. Off-white to light brown covers a wide range, and a blend can reproduce it. The stronger signals are the method, the sugar profile, the linkage pattern and the mass balance. ## How to write the identity into the specification - “Yeast-derived β-1,3/1,6-glucan, CAS 9041-22-9, (C6H10O5)n, from Saccharomyces cerevisiae.” - “β-Glucan ≥70% by the named enzymatic method; state the basis.” - “Moisture ≤6.0%; ash ≤3.0%; protein ≤5.0%.” - “Identification by enzymatic and HPLC methods conforming to the reference.” - “No added maltodextrin, glucose or other carrier unless declared and quantified.” - “Source, strain and cell-wall process under change control.” ## Five questions for the supplier - Which yeast and which cell-wall process produced this lot? - Which enzymatic method and which kit were used, and is the result as-is or dry basis? - Can you provide the chromatogram or sugar profile behind the HPLC identification? - What are the moisture, ash and protein results for this lot, and how do they close the mass balance? - If the source or the linkage is disputed, will you agree to a joint re-test of the retained sample? Those five answers, taken together, form an identity file; one assay percentage does not. Catalog figures are on the beta-glucan hub; the COA page locates each result on the certificate; the grades page compares the source families; the level-four comparison follows the linkage and claim consequences; the chitosan page is a parallel case for a source-dependent polymer; the methods library explains the procedures; the quality page describes the release workflow. ### 01 What the COA for L-carnosine actually contains URL: https://nutrition.rainwoodbio.com/products/specialty/carnosine/coa/ Reviewed: 2026-11-19 An L-carnosine certificate has to do two jobs at once: quantify the dipeptide and prove its optical form. The assay range is 98.0–101.0% by HPLC; specific rotation is +20.0° to +22.0° on the dry basis; loss on drying is ≤1.0%; and the heavy-metal and microbiology panels sit beside them. The release limit belongs in one column and the measured result in another. The catalog limits below are the specification; a lot is released against the certificate for that pack. In one lineThe assay says how much carnosine is present; the rotation and the loss on drying say whether it is the L-form the label names. ## What each line has to show A useful certificate is read from left to right: parameter, method, limit, result. Each line should stand on its own, so a reviewer can check the method and the gate without asking for a second document. A line that offers only “conforms” removes the evidence and leaves the conclusion. Two rows carry the identity argument. IR and HPLC establish that the substance is the carnosine dipeptide. Polarimetry establishes which enantiomer it is. The assay then puts a number on the content. Release tests and limits for L-carnosine | Parameter | Method | Release limit | Appearance | Visual | White powder | Identification | IR and HPLC | Conforms to the reference | Assay | HPLC | 98.0–101.0% | Specific rotation | Polarimetry, calculated on the dry basis | +20.0° to +22.0° | Loss on drying | Gravimetric | ≤1.0% | Elemental impurities | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbial limits | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent ## The three numbers that depend on moisture The assay range of 98.0–101.0% is measured by HPLC. The certificate should say whether the percentage is calculated on the powder as received or after the loss on drying has been subtracted. At a moisture limit of 1.0% the gap is small, but small is not zero, and a specification that does not name the basis invites two laboratories to report different numbers for the same lot. The rotation is different: it is defined on the dry basis, so the laboratory has to dry the sample or correct for the measured moisture before reporting the angle. Temperature, solvent, concentration and cell length should be printed with the result. Without them the angle cannot be reproduced or compared with the +20.0° to +22.0° window. HPLC needs its own description: column, mobile phase, wavelength and standard. Carnosine absorbs in the short ultraviolet rather than the visible range, so the detection wavelength and the reference standard are substantive parts of the method, not footnotes. IR adds a second identity dimension through the amide and imidazole bands. ## Limit, result and the difference between them The limit is a boundary; the result is a measurement. When the result column repeats the limit, the certificate has told the reader nothing about the lot. A proper page shows a number for each parameter and a method beside it. The measured value behind each limit | Parameter | Release limit | Result column | Assay | 98.0–101.0% by HPLC | A measured percentage, with the basis and the standard | Specific rotation | +20.0° to +22.0° dry basis | A measured angle, with temperature, solvent and concentration | Loss on drying | ≤1.0% | A measured percentage | Elemental impurities | Per element | The measured mg/kg figure for each element | Microbial limits | Counts and absence | The plate count and the absence result A single “passes” statement collapses five separate checks into one sentence. The reviewer cannot see whether the lead result sat close to its limit, whether the rotation was near the bottom of its window, or whether the moisture was 0.2% or 0.9%. ## Where lots move Different crystallisation and drying conditions shift the moisture, the colour and occasionally the feel of the powder. Milling changes bulk density and flow but not the molecule. Hydrolysis raises the free histidine peak and pulls the assay down; racemisation pulls the rotation down while the achiral assay can stay inside its range. The assay and the chromatogram show the first; the polarimeter shows the second. Watch the direction of travel across several lots. A rotation that has fallen from +21.5° to +20.2° is still inside the window, but the trend is worth a question. The same applies to a moisture result that has doubled while remaining below 1.0%. ## When the in-house certificate is not enough A new source, a first entry into a regulated market, an edge-of-window rotation or a disputed result are the four occasions for an outside laboratory. The panel should be built around the question, not copied from the certificate: HPLC assay and identity, polarimetry with the conditions recorded, moisture, ICP-MS for the four heavy metals, and the micro suite. Add zinc by ICP-OES when the identity is in doubt. The L-carnosine molecule contains no zinc; zinc-carnosine is about 22.6% zinc. A trace result is unremarkable; a figure near the chelate's theoretical value changes the conversation from purity to material identity. Ask for the detection limit behind every “not detected” entry. A method that cannot see 0.5 mg/kg cannot support a statement about 0.1 mg/kg. Retain the sample that was tested, and record the lot code on the report. ## A like-for-like comparison Compare six fields: name and CAS; assay with its basis; rotation with its conditions; moisture; contaminants and micro; pack and lot. Two offers that match on assay but not on rotation or moisture are not the same material, even when both are called L-carnosine. Traceability is the second pass. Who made the lot, by which route, and with which drying and milling steps? The answers belong in the file. The specification is summarised on the carnosine product page; the analytical argument is on the identity page; the destination documents are on the compliance page; the chromatographic method is in the HPLC note; the release sequence is described on the quality page. ### 02 L-carnosine grades: powder, granulation and the name on the label URL: https://nutrition.rainwoodbio.com/products/specialty/carnosine/grades/ Reviewed: 2026-11-19 The catalog material is L-carnosine: a white, freely soluble powder, 98.0–101.0% by HPLC, rotation +20.0° to +22.0° on the dry basis, moisture ≤1.0%. Three other offers sit near it in a catalogue: a granulated version of the same powder, a diluted blend, and zinc-carnosine. The first two are the same molecule; the first is the standard grade, the second a handling variant, and zinc-carnosine is a different substance. In one lineThere is one catalog grade of L-carnosine; granulation changes handling, a dilution changes the label, and zinc-carnosine is a different material rather than a stronger grade. ## Why the name needs a form behind it Carnosine is a dipeptide, and the name is often used without a form. A buyer can be offered a fine powder, a granule, a blend carrying a carnosine number, or the zinc chelate, all under a short label. The specification has to name L-carnosine, CAS 305-84-0, and the physical form; the CAS number is the quickest way to keep the four apart. Purity is not the axis that separates them. The catalog material has one assay range. What changes across the offers is the handling behaviour, the mass of carnosine per gram, or the molecule itself. ## The forms side by side L-carnosine forms and the chelate | Form | CAS | Assay | Typical use | L-carnosine powder | 305-84-0 | 98.0–101.0% by HPLC | Capsules, tablets, powder blends | Granulated L-carnosine | 305-84-0 | Same range; own particle profile | Flow and dust control | Diluted L-carnosine | 305-84-0 plus carrier | Lower assay per gram | Low-dose blends; carrier declared | Zinc-carnosine | 107667-60-7 | Carnosine moiety plus elemental zinc | Separate material and file Rows one and two share a CAS number and differ only in how the particles are built. Row three shares the CAS number of the dipeptide but adds a carrier, so the assay per gram falls and the label gains an ingredient. Row four is a chelate with its own CAS number, its own formula and a zinc figure; the level-four comparison works through the assay and label consequences. ## Solubility and flow L-carnosine dissolves freely in water and is hygroscopic as a solid. A fine powder therefore needs a dry room and a sealed container; a granule presents less surface and flows more steadily, which is why a capsule line may prefer it. Granulation changes bulk density, dust and sometimes the rate at which the powder dissolves. None of those changes the assay or the rotation. Particle size should be written into the specification when it matters. The catalog does not promise a single mesh; the buyer states the range that the filling machine or the blend can tolerate, and the supplier confirms it before the order. Bulk density is the other practical figure: it decides how much powder a capsule or a scoop holds, and it changes when the powder is granulated. Ask for the bulk density range when the fill weight is tight. ## The dosage form and the declared ingredient A capsule or tablet uses the powder or granulate at a fill weight calculated from the carnosine content. A granulated grade can need a different fill weight for the same carnosine content, because the granule packs differently from the fine powder. A stick pack or powder blend uses the powder because it dissolves. A diluted grade is useful when the dose per unit is small, but the carrier is now part of the formula and has to be declared. The label is the constraint that decides most of these cases. L-carnosine is the ingredient name; a carrier is a second ingredient; zinc-carnosine is a different name and brings a zinc figure with it. A change of form that moves any of those three is a label change. ## What to write into the specification - “L-carnosine, CAS 305-84-0, C9H14N4O3, molecular weight 226.23.” - “Assay 98.0–101.0% by HPLC; state the basis on the certificate.” - “Specific rotation +20.0° to +22.0° on the dry basis; state temperature, solvent and concentration.” - “Loss on drying ≤1.0%; heavy metals and microbiology as listed.” - “Particle profile and bulk density agreed for the dosage form, where the powder is granulated.” - “Carrier and assay per gram stated where the material is diluted.” - “Zinc below the agreed limit, to exclude zinc-carnosine.” ## When a different form is the wrong purchase A granulated powder that dissolves slowly can leave haze in a clear drink; test it in the vehicle before the production run. A diluted grade cannot sit behind a label that declares pure L-carnosine. Zinc-carnosine cannot fill a carnosine line at all, because the declared substance and the zinc load both change. Conversely, L-carnosine cannot replace the chelate where the chelate is the named ingredient. The two purchases are separate, and the comparison page sets out the arithmetic. The product page has the catalog data; the glutathione range shows another ingredient whose forms are separate specifications; the HPLC note covers the assay; the quality page covers release. ### 02.1 Carnosine vs zinc-carnosine: the chelate, the assay and the label URL: https://nutrition.rainwoodbio.com/products/specialty/carnosine/grades/carnosine-vs-zinc-carnosine/ Reviewed: 2026-11-19 L-carnosine (CAS 305-84-0) is the free dipeptide. Zinc-carnosine (CAS 107667-60-7) is a 1:1 chelate in which one zinc ion is bound to one carnosine unit. The formulas differ, the molecular weights differ, and the chelate is about 22.6% zinc and 77.4% carnosine equivalent by mass. An assay, a dose or a label written for one material does not carry over to the other. In one lineZinc-carnosine is a different molecule: 100 mg of the chelate carries about 77 mg of carnosine and 22.6 mg of zinc, and neither the assay nor the label transfers. ## What the chelate actually is Carnosine is β-alanyl-L-histidine, C9H14N4O3, molecular weight 226.23. To form the chelate, the dipeptide gives up two protons and coordinates a zinc ion; the resulting formula is C9H12N4O3Zn and the molecular weight is 289.59. The material is also known as polaprezinc. The zinc is held by the dipeptide, not blended alongside it, and that is what the word chelate is doing in the name. The two-proton difference looks minor on paper and is not minor in a specification. It explains why the carnosine share of the chelate is 77.4% rather than 100%, and why the two materials have different CAS numbers, different certificate lines and different names for the label. A purchase order that says only “carnosine” has not selected either material. ## Two assays, not one number with a zinc footnote The free dipeptide is described by three lines: assay 98.0–101.0% by HPLC, specific rotation +20.0° to +22.0° on the dry basis, and loss on drying ≤1.0%. Together they say how much carnosine is present and that it is the L-form. The chelate needs a carnosine-moiety assay and an elemental zinc assay, each with its own method. A chelate can dissociate on an HPLC column, so a result read against a carnosine standard measures the dipeptide moiety rather than the whole complex as weighed. The certificate should name the standard and state whether the assay is calculated on the dried basis. Zinc is normally measured by ICP-OES or atomic absorption. The theoretical value is 22.6%; a result near that figure, with a moiety assay that closes the mass balance, is consistent with the chelate. A certificate that reports a carnosine figure close to 100% and no zinc has described only part of the molecule. The rotation belongs to the L-carnosine specification and cannot stand in for the zinc result. ## The mass arithmetic and the zinc load One mole of chelate carries one mole of zinc and one mole of the carnosine moiety, so the split follows the formula: 65.38 ÷ 289.59 = 22.6% zinc, with the remaining 77.4% counted as carnosine equivalent. That is arithmetic for a label and a weigh-up, not a suggested intake. Mass arithmetic for L-carnosine and zinc-carnosine | Material and quantity | Carnosine equivalent | Zinc | 100 mg L-carnosine | 100 mg | None added | 100 mg zinc-carnosine | 77.4 mg | 22.6 mg | 25.8 mg zinc-carnosine | 20.0 mg | 5.8 mg The third row is the one that matters when a formula changes. If the label says 20 mg carnosine and the source is the chelate, the weigh-up is 25.8 mg, and 5.8 mg of zinc arrives with it. In the EU the reference intake for zinc is 10 mg/day under Regulation (EU) No 1169/2011, so that single switch supplies more than half the reference intake before any other zinc in the formula is counted. The buyer's regulatory team confirms how the zinc is declared and whether the daily amount fits the destination rules. ## The label cannot be swapped The declared ingredient name is the material. “L-carnosine” and “zinc-carnosine” are two names for two substances, and one does not satisfy a label written around the other. Moving a formula from the dipeptide to the chelate changes the ingredient name, the quantity per serving and the zinc contribution at the same time. The reverse move is equally wrong. Replacing 20 mg of zinc-carnosine with 20 mg of L-carnosine removes about 4.5 mg of zinc and changes the declared ingredient. The label, the specification and the lot certificate have to name the same material, and the zinc figure belongs on the label wherever the chelate is the source. Claims follow the name as well. A structure or function wording assessed for one material is not automatically available for the other, because the ingredient and its zinc content have changed. No disease-related claim is made here for either material; the wording is reviewed for the destination before use. ## Two materials, two regulatory files A regulatory file belongs to a material, not to a family name. Paperwork assembled for L-carnosine does not establish the route for zinc-carnosine, and a file for the chelate does not cover the free dipeptide. Some markets have a product-specific entry for one form and not the other; the current text and its conditions have to be checked for the destination rather than inferred from the shared word in the name. The buyer's regulatory team confirms the route, the permitted use and the label for the market where the finished product will be sold. The supplier's part is the specification, the lot certificate, the safety data sheet and the change-control record for the material actually shipped. ## When each material is the right purchase Choose L-carnosine when the label names carnosine and the dosage form is a capsule, tablet or powder blend built on the dipeptide. Choose zinc-carnosine when the chelate is the named ingredient and the zinc is intended, and specify the carnosine-moiety assay and the zinc assay together. Neither is a substitute for the other, and the simplest safeguard is to put the CAS number on the purchase order. The carnosine product page carries the L-carnosine specification; the grades page covers the powder and granulated forms; the identity page sets out the tests that tell the two materials apart; the compliance page lists the documents; the glutathione range is a second example of a specialty ingredient whose forms are separate specifications. ### 03 L-carnosine stability: moisture, hydrolysis and the pack URL: https://nutrition.rainwoodbio.com/products/specialty/carnosine/stability/ Reviewed: 2026-11-19 Moisture is the main enemy of L-carnosine powder, and heat makes it worse. The solid is hygroscopic, and the dipeptide bond can hydrolyse to β-alanine and L-histidine once water is present. A sealed pouch or a lined drum keeps the powder within its 1.0% moisture limit; an aqueous stock is the least stable format and needs a measured hold time. Shelf life is a property of the pack and the storage condition, not of the molecule alone. In one lineCarnosine is hygroscopic and hydrolyses to β-alanine and L-histidine; the pack, the moisture and the temperature set the shelf life. ## The solid: moisture, caking and the slow reaction The release limit for loss on drying is 1.0%. A lot can pass that limit and still pick up water after the pack is opened. The powder then cakes, gains weight and loses as-is assay; the moisture is not an inert diluent, because water is also the reagent in hydrolysis. Keep the original pack closed between uses, keep a dry room, and do not park an open drum under a humid loading bay. The hydrolysis products are β-alanine and L-histidine. They appear as a free histidine peak in the purity chromatogram, and the peak grows faster in a warm, damp store. That is why the stability programme tests related substances beside the assay: a lot can hold its assay while the impurity profile is already moving. ## In water, the reaction has a head start L-carnosine dissolves readily, which makes a clear stock easy to prepare and easy to over-hold. In solution the dipeptide is surrounded by water, so hydrolysis no longer waits for moisture pickup; pH and temperature become the controlling variables. A neutral, cool stock held for a short, validated time is the practical case; an alkaline or acidic stock held warm is the case that fails. Microbial control belongs to the same discussion. A preservative-free solution held for days is a microbiological risk even when the assay is unchanged. A ready-to-drink process adds pasteurisation or hot fill, and that heat load has to be tested in the finished drink, not inferred from the powder. ## What drives degradation Factors that move L-carnosine during storage | Factor | What it does | Control | Moisture | Raises loss on drying; drives hydrolysis and caking | Sealed pouch; desiccant where needed; dry store | Heat | Accelerates hydrolysis and colour change | Cool store; control process temperature | pH | Extremes of pH speed hydrolysis in solution | Validate matrix pH; buffer if needed | Metal ions | Carnosine binds transition metals; colour and stability can shift | Avoid iron and copper contact in solution | Reducing sugars | The free amino group reacts; browning in a moist blend | Dry blend; control water activity | Time | All of the above accumulate | Retest period; retained sample These factors do not act separately. A warm, humid store is worse than either condition on its own, and a solution at an extreme pH in a warm room combines the two fastest routes. The useful question is not whether carnosine is stable in general but how long it stays in specification in this pack, in this matrix, at this condition. ## Designing the stability trial Run the packed material at 25 °C/60% relative humidity for the long term, 30 °C/65% relative humidity for the intermediate condition and 40 °C/75% relative humidity for the accelerated arm. Add an opened-pack arm that mimics the in-use period. Test assay, rotation, loss on drying, appearance, related substances and micro at each pull point. For a drink or a stick pack, repeat the trial in the matrix at the process pH and heat load. Report the individual results with the pack and lot family, not a single pass line. A stability summary that does not name the pack cannot support a shelf life for the pack the customer buys. ## The matrix decides more than the molecule Capsules and tablets keep water activity low, but the shell and the other ingredients can still pass moisture into the fill. Check the fill's appearance and moisture after storage, not only at release. In a powder blend, a reducing sugar plus residual water can brown the mix through the free amino group of carnosine, even when the dipeptide itself is intact. A beverage brings water, pH, heat and time together. The bulk result is the starting point; the formulator still has to decide whether an overage is justified, and that decision belongs to the label and stability file rather than to the pack. ## Assigning the retest period The retest period is written against a pack and a storage condition, and it is supported by the trial that used that pack. A bulk number copied onto a repacked pouch is not supported by the original data. When the period ends, re-test the retained sample; extend only on a result, never on the calendar. Pack options sit on the product page; the release tests are on the COA page; pack sizes and lead times are on the MOQ page; the HPLC note explains the chromatographic method; release is handled under the quality page. ### 04 L-carnosine: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/specialty/carnosine/moq/ Reviewed: 2026-11-19 The minimum order for L-carnosine is a single 1 kg foil pouch; production usually moves to a 25 kg fiber drum. Standard lead time is 1–7 days. A quotation can be firm only when it names the material and CAS number, the specification, the pack and quantity, the destination and Incoterm, the documents and the market where the product will be sold. In one lineThe 1 kg pouch is our smallest commercial unit: one lot code, one retained sample and one COA, with enough powder to run a trial. ## Why the first pack is 1 kg One kilogram is enough for a bench trial, a retained sample and an independent check, and it travels as a parcel rather than a pallet. Those three uses are the reason the pack exists: a trial without a retained sample cannot be defended later, and a sample without a lot code is only a demonstration. Smaller quantities come from splitting a larger lot. Splitting adds a repack step, breaks the original pack identity and makes the chain from drum to sample harder to document. At the other end, the 25 kg drum lowers handling per kilogram but ties up inventory and storage time. The minimum follows the pack, not the order size. ## Packs and formats Standard L-carnosine packs | Pack | Net weight | Where it fits | Notes | Foil pouch | 1 kg | Trials, samples and small batches | Moisture barrier; close it properly after sampling | Fiber drum | 25 kg | Production | Lined drum; lot marked on drum and liner | Granulated powder | On request | Handling and flow | Coarser, freer-flowing particles | Diluted powder | On request | Low dose per gram | Carrier appears on the label The powder is hygroscopic, so the pack has to be read as part of the specification. The foil pouch is the moisture barrier and its seal is the weakest point; a rolled-down top is not a seal. The drum depends on the inner liner, and the liner should be closed after each withdrawal. A desiccant is useful in a humid room but does not replace a closed pack. ## From confirmation to dispatch The 1–7 day window covers picking, paperwork and handover to the carrier. Transit, customs and the customer's own release sit outside it. A granulation, a dilution or a special pack is a separate line on the quotation and usually a longer date. Ask for the dispatch date as well as the lead time. The trade term assigns the freight booking and the customs entry; the packing list, COA and other documents belong on the same shipment as the lot. A document that arrives after the drum delays the release. ## Six details for a comparable quotation These are the fields that make two offers comparable: - The material. L-carnosine, CAS 305-84-0 and the physical form, written out; zinc-carnosine is a separate order. - The specification. Assay with its basis, rotation, moisture, metals and micro. - Amount and pack. A 1 kg pouch, a 25 kg drum, or a granulated or diluted grade. - Destination and trade term. Where it is going, and which Incoterm assigns freight and entry. - Paperwork. COA, specification, SDS and any market statement the importer needs. - Use and market. What the material is for, and where the finished product will be sold. Without the market and the material name, two quotations cannot be compared. The same powder may fit one destination and not another. Commercial terms are not published here; they are set out in the quotation. ## A sample with a lot code Qualification starts with the 1 kg pouch. Test identity, assay, rotation, moisture and micro before scale-up, and keep part of the same pack as the retained sample. The lot code on the pouch, the certificate and the quotation should agree. A bench quantity split from bulk is a repack, not the catalog pack. If that is what the project needs, say so before the order and document the split. Do not assume the bench sample and the production drum share a lot. ## The quality terms beside the commercial ones The quotation fixes the commercial side: pack, lead time and paperwork. The quality agreement covers the specification revision, the certificate for each lot, the sample kept back, the retest period and how changes are handled. It is easier to agree those before the first production order than after a disputed result. If a lot fails the agreed specification, the retained sample and a joint re-test are the evidence. Agree in advance which laboratory is acceptable to both sides and who commissions the referee test. The product page holds the catalog data; the COA page walks through the release tests; the compliance page sets out the market documents; the MOQ glossary explains the abbreviation; shipping sits on the logistics page; the quality page covers release and change control. ### 05 The regulatory file for L-carnosine URL: https://nutrition.rainwoodbio.com/products/specialty/carnosine/compliance/ Reviewed: 2026-11-19 L-carnosine is bought as the dipeptide CAS 305-84-0. The specification and the lot certificate describe what is in the drum; the regulatory file has to show that the material, the limits and the label fit the market where the finished product is sold. That route is confirmed by the buyer's regulatory team, not inferred from the ingredient name. The checks below are the ones the file should answer. In one lineThe certificate describes one lot; the regulatory file has to show that the material, the limits and the label fit the market where the product is sold. ## Four questions the file must answer Which material and which specification version are being bought? Which lot is being released and what does its certificate say? What do the destination rules require of the formula and its label? What happens to the file if the source, process or pack changes? The technical data sheet answers the first, the certificate the second, the destination rules the third, and change control the fourth. Supporting statements belong in the same folder: allergens, GMO status, origin, residual solvents and any customer-specific declaration. Each should carry a date and a version. An undated PDF is difficult to defend once a specification has moved. ## European Union The EU framework includes Regulation (EC) No 178/2002 on general food law, Regulation (EU) No 1169/2011 on food information, Commission Regulation (EU) 2023/915 on contaminants and Directive 2002/46/EC on food supplements. The buyer's regulatory team identifies the route that applies to the destination member state and checks the current consolidated text. Some markets have a product-specific entry for a form of carnosine; the entry and its conditions are confirmed for the destination rather than assumed from the name. Great Britain maintains a separate register and separate labelling rules, while Northern Ireland follows the EU framework. The buyer's team decides which applies and keeps the evidence with the order. ## United States The US route is the dietary-supplement framework. The buyer's regulatory team confirms the basis for the ingredient, whether a premarket notification is required, and that the basis extends to the finished product and the wording the brand intends to use. Current good manufacturing practice under 21 CFR Part 111 and the Supplement Facts label under 21 CFR 101.36 are reviewed with the finished product. The supplier supplies the identity, the specification version and the lot certificate. The label and the claim are separate reviews, and neither is settled by a certificate of analysis. ## Contaminants and limits A contaminant result on the drum is only half the calculation; the finished product also depends on how much of the ingredient a serving contains. The catalog limits below apply to the ingredient, and the destination text and daily dose set the limit that matters for the supplement. Catalog contaminant limits for L-carnosine | Parameter | Catalog limit | What the file should show | Lead (Pb) | ≤3 mg/kg | Lot result, method and the finished-product calculation | Arsenic (As) | ≤2 mg/kg | Lot result and method | Cadmium (Cd) | ≤1 mg/kg | The lot figure, plus any category exception | Mercury (Hg) | ≤0.1 mg/kg | Lot result and method Zinc is not a contaminant limit on the L-carnosine specification in the same sense; it is an identity screen. A zinc result above trace level points to zinc-carnosine rather than to a contaminated lot, and that is a different conversation with the supplier. ## Label, name and claim The label has to name the material the pack contains. For this product that is L-carnosine, with the stereochemical descriptor where the market requires it. Zinc-carnosine is a different ingredient and a different name; it cannot appear on a label built around the free dipeptide. The claim review is a separate step: the brand's reviewer checks the wording against the destination rules for the finished product. No disease-related claim is made for L-carnosine. A structure or function statement, where the market allows one, still has to be reviewed for the product and the destination. A certificate does not settle a claim, and a claim cannot rewrite the specification. ## Documents in the file - Specification with a version number, the material name, CAS 305-84-0 and the form. - Certificate of analysis for the lot, with methods, limits and measured results. - Technical data sheet and safety data sheet. - Allergen and GMO statements; origin record; residual-solvent statement. - Statement on the source and the manufacturing route, under change control. - Any destination-specific declaration the importer requires. A document that is not dated and versioned is hard to defend after a specification change. Keep the version that was in force when the lot was released, and keep the change record beside it. ## Before the first order - The specification, the CAS number and the material form are pinned to a version. - The certificate, technical sheet, safety sheet and supporting statements are dated and filed. - Each contaminant result has been carried through to the finished-product dose. - The label wording and any claim have been checked for the destination. - Source, process and pack sit under a change-control procedure. - Quotation, specification and certificate all cite the same version. The product page holds the catalog data; the COA page walks through the lot certificate; the identity page sets out the analytical argument; the quality page describes the release file; the EU regulatory note supplies the framework reference. ### 06 How to prove a carnosine lot is L-carnosine URL: https://nutrition.rainwoodbio.com/products/specialty/carnosine/identity/ Reviewed: 2026-11-19 A lot is L-carnosine when the document, the chromatogram, the polarimeter and the mass balance agree. The document names the material, CAS 305-84-0 and C9H14N4O3. HPLC and IR show the dipeptide. Specific rotation within +20.0° to +22.0° on the dry basis shows the L-form. Assay, moisture and the impurity profile show that nothing else has been added or lost. A zinc result separates the dipeptide from zinc-carnosine. In one lineA carnosine lot is proven by agreement: the chromatogram, the rotation and the moisture must all point to the same material. ## Four separate questions Each layer answers a question the others cannot. The document can be right while the powder is wrong; the chromatogram can show carnosine while the optical form is racemic; the assay can be in range while the impurity profile has moved. The table sets out what each test actually proves. Four layers of L-carnosine identity | Layer | What it asks | Measurement | What the result supports | Document | Does the paper name the material? | Name, CAS number, formula | Only what the file says | Chromatography | Is the dipeptide carnosine? | HPLC retention; IR spectrum | The molecule, not the form | Optical form | Is it the L-form? | Polarimetry on the dry basis | The stereochemistry | Mass balance | Is it diluted or hydrolysed? | Assay, loss on drying, related substances | Consistency of the numbers ## Rotation, dilution and the zinc ratio Specific rotation is the observed angle divided by concentration and path length, corrected to the dried material. The L-form sits at +20.0° to +22.0°; the D-form turns the other way; a racemic mixture lands near zero. A low angle has two readings: a partly racemised lot, or a dilution, because the calculation uses the sample weight rather than the carnosine weight. The assay separates them. A normal assay with a low angle points to the optical composition; a low assay with a low angle points to a dilution. Zinc gives a second ratio. The free dipeptide carries no zinc in its formula, while zinc-carnosine is 22.6% zinc and 19.3% nitrogen, against 24.8% nitrogen for L-carnosine. A zinc result near the chelate's figure is not a purity deviation; it is a different material. ## What XRD adds X-ray diffraction tells crystalline from amorphous and compares a pattern with a reference. It is useful when a lot looks different, when a supplier is new, or when a dilution is suspected. It does not measure optical purity or assay, and a “match” statement without the reference pattern and the detection limit is hard to assess. On a disputed lot, XRD, rotation and HPLC answer different parts of the same question and are stronger together than any one alone. XRD is not a routine release test here. The XRD method note describes the measurement. ## What adulteration looks like Common L-carnosine substitutions and the signals | Substitute | Effect on the lot | What to look for | Test | D-carnosine or a racemate | Opposite or reduced rotation; achiral assay may pass | Rotation below +20.0° with an assay in range | Polarimetry | Zinc-carnosine | Adds zinc; different molecule | Zinc above trace level | ICP-OES for zinc | Dilution | Lowers assay and specific rotation in proportion | Assay low; rotation low; peak shape normal | Assay, rotation and mass balance | Moisture | Higher loss on drying; lower as-is assay | Loss on drying above 1.0% | Gravimetric loss on drying | Other dipeptide | Similar retention; different spectrum | Extra peak or ratio shift | HPLC and IR; MS if needed Appearance is a weak screen. A white powder can be carnosine, a dilution or something else entirely. The rotation, the zinc figure and the mass balance are the stronger checks; a certificate that reports only appearance and assay has not tested the most likely substitution. ## How to write identity into the specification - “L-carnosine, CAS 305-84-0, C9H14N4O3, molecular weight 226.23.” - “Assay 98.0–101.0% by HPLC; state the basis.” - “Specific rotation +20.0° to +22.0° on the dry basis; report temperature, solvent and concentration.” - “Identification by IR and HPLC against the reference; loss on drying ≤1.0%.” - “Zinc below the agreed limit, to exclude zinc-carnosine.” - “Related substances, including free histidine, below the agreed limits.” - “Destination market and the material name settled before the first order.” ## Questions worth putting to the supplier - What material name and CAS number appear on this lot's certificate? - Which temperature, solvent and concentration were used for the rotation? - May I see the chromatogram and the IR spectrum, not only the assay figure? - What zinc result did the lot return, and by which method? - If we disagree, will you re-test the retained sample jointly? Those five answers amount to an identity file; a single assay figure does not. The product page holds the catalog data; the COA page shows how those figures are reported for a lot; the grades page sets out the physical forms; the level-four comparison covers the chelate; the glutathione range is a second specialty ingredient whose forms are separate identities; the HPLC note explains the separation. ### 01 What a chitosan COA reports: deacetylation, viscosity and limits URL: https://nutrition.rainwoodbio.com/products/specialty/chitosan/coa/ Reviewed: 2026-11-19 The certificate for a chitosan lot reports degree of deacetylation by titration, viscosity in 1% acetic acid, moisture, ash, insoluble matter, the heavy-metal panel, microbiology and particle size. There is no single assay percentage, because chitosan is a polymer defined by two properties rather than by one purity figure. The limits in the first table are the catalog specification; the batch COA is the document that confirms a particular pack. In one lineA chitosan certificate is read on two axes, deacetylation and viscosity; moisture, ash and insoluble matter explain why two lots with the same headline numbers can still behave differently. ## The certificate as a test report A certificate is useful when it can be audited line by line: what was measured, which method produced the number, and which limit the lot was released against. A line that says only “conforms” asks the reader to trust a conclusion without the evidence. Identity, deacetylation, viscosity and contaminants · chitosan | Parameter | Method | Release limit | Appearance | Visual | Off-white to pale yellow powder or flakes | Degree of deacetylation | Titration, method named on the certificate | ≥85% | Viscosity | Viscometry, 1% in 1% acetic acid | 50–200 mPa·s | Moisture | Gravimetric | ≤10.0% | Ash | Gravimetric after ignition | ≤1.0% | Insoluble matter | Dissolution in dilute acetic acid, filtration, gravimetry | ≤1.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh ## Deacetylation is a ratio; viscosity is a measurement with conditions Degree of deacetylation is the share of glucosamine units that carry a free amine instead of an acetyl group. It is a ratio between repeat units, so it is not corrected to a dried basis the way a small-molecule assay is; moisture does not explain away a low figure. The method does matter. Potentiometric back-titration of the free amine after dissolution in excess acid is the usual approach, proton NMR is the reference method, and an FTIR band ratio is a rapid screen. The same lot can read a few points apart under two methods, so the certificate has to name the one it used. Viscosity is a property of the solution, not of the powder alone. The catalog figure is measured at 1% in 1% acetic acid, and the reading moves with temperature, spindle, stirring rate and the time the solution stood before it was measured. Chitosan solutions lose viscosity as the chains shorten, so a reading taken after one hour and a reading taken the next day are different measurements. A specification that says “50–200 mPa·s” without the concentration, solvent, temperature and standing time has not fixed the test. Moisture, ash and insoluble matter are mass fractions of the powder as received, so they are read against the as-is weight. Ash is what remains after ignition: residual mineral from the source and the process, mainly calcium salts and sodium chloride. Insoluble matter is what does not dissolve in dilute acetic acid, usually residual chitin or foreign particulate. Both are small numbers with a large diagnostic value. ## Release limit versus batch result The release limit is the acceptance boundary for the lot; the batch result is what the laboratory measured. Both belong on the page, in separate columns, with the method beside them. A result column filled with the specification range is a copy of the gate, not a result. What the result column should contain | Parameter | Release limit | Result column | Degree of deacetylation | ≥85% | A measured percentage, with the titration method | Viscosity | 50–200 mPa·s | The measured figure, plus concentration, solvent, temperature and standing time | Moisture | ≤10.0% | A measured percentage | Ash | ≤1.0% | A measured percentage | Insoluble matter | ≤1.0% | A measured percentage, with the dissolution solvent | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot The viscosity line deserves a second value: the measured figure and the conditions. A number near the top of the range from a solution read after two hours is not the same evidence as the same number read after 24 hours. ## What moves between batches Batch variation in chitosan starts at the deacetylation step and continues through everything after it. Alkali concentration, temperature and hold time set the degree of deacetylation; the same conditions also shorten the polymer chain, so a push towards a higher deacetylation figure usually costs viscosity. The two numbers are linked, and a specification that fixes both narrows the process window the supplier has to work in. Demineralisation controls ash, filtration and washing control insoluble matter, and drying or bleaching controls colour. Colour is the least quantitative line on the certificate. Off-white to pale yellow is a wide window, and a pink or brown cast can point to residual protein, an oxidation product or a different drying step while deacetylation and viscosity still pass. Ask for the process record before rejecting on shade alone. Read the trend across lots, not one result near a limit: deacetylation drifting towards 85%, viscosity drifting upward, ash climbing after a source change. Each is a signal to look at the process, not only the number. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a disputed deacetylation figure, or a viscosity result that cannot be reproduced. The useful panel is not a full repeat: it is titration by a named method plus proton NMR for deacetylation, viscometry under the contract conditions on a freshly prepared solution, ash, insoluble matter, moisture, ICP-MS for the heavy-metal panel and microbiology. Add a source check when the allergen statement rests on it. Shellfish-derived chitosan carries a crustacean declaration in many markets; a fungal lot carries a different source record, and the two files are not interchangeable. A “not detected” line without a detection limit is evidence about the method’s sensitivity, not about the lot. Chain of custody applies. The sample tested should be the retained sample, and the report should name the lot and the pack. When a result is contested, give the referee the retained sample, the supplier’s certificate and the contract specification. ## What to compare between suppliers Put six lines side by side: source and CAS number; deacetylation result with the method; viscosity result with the concentration, solvent, temperature and standing time; moisture, ash and insoluble matter; heavy metals and microbiology; pack size and lot code. Two quotations that agree on deacetylation but differ on viscosity or source are not describing the same powder. The second layer is traceability. The certificate should name who manufactured the lot, which shell or fermentation source was used, and which demineralisation, deacetylation and milling steps were applied. The catalog specification sits on the chitosan product page. The grades page explains how the two headline numbers are traded; the identity page gives the tests that separate chitosan from chitin; the analytical methods describe the instruments behind each row; the release workflow is on the quality page. ### 02 Chitosan grades: the two numbers that define the powder URL: https://nutrition.rainwoodbio.com/products/specialty/chitosan/grades/ Reviewed: 2026-11-19 Chitosan is traded by grade, and a grade is fixed by two numbers: degree of deacetylation and viscosity. The catalog grade is ≥85% deacetylation by titration and 50–200 mPa·s in 1% acetic acid, a low-viscosity, high-deacetylation powder milled to 80 mesh. The form, powder or flakes, is the third variable, and it changes hydration time rather than chemistry. In one lineA chitosan grade is a pair of numbers, deacetylation and viscosity; the purchase order that names only the first has not described the material. ## Why chitosan is graded at all Chitin is a polymer of N-acetylglucosamine, and chitosan is what it becomes when part of the acetyl groups are removed. The conversion is never complete, so every commercial lot sits somewhere on a continuum between the two. The first number, degree of deacetylation, says how far along that continuum the lot has travelled: it sets the number of free amine groups, the charge density in acid solution and the point at which the polymer becomes soluble. The second number, viscosity, says how long the chains are. Two lots can carry the same deacetylation figure and behave like different materials in a mixer: one pours and the other gels. Viscosity is therefore part of the grade, not a processing detail. Source is the third axis. A shrimp-shell lot, a crab-shell lot and a fungal-fermentation lot can meet the same two numbers and still differ in ash, colour, odour and the documents that travel with them. Food grade and technical grade are a fourth distinction: the polymer may look the same on the certificate, while the contaminant panel and the traceability file are not. ## The grade families side by side Chitosan grade families as they are usually traded | Grade family | Deacetylation | Viscosity (1% in 1% acetic acid) | Form | Where it fits | Catalog, food grade | ≥85%, titration | 50–200 mPa·s | 80 mesh powder; flakes on request | Capsules, tablets, powder blends | Higher-viscosity food grade | ≥85% | Above 200 mPa·s, agreed per lot | Powder | Thicker solutions, film-forming | Higher-deacetylation grade | 90–95%, agreed per lot | Agreed per lot | Powder | Where the free-amine count is the point | Flake grade | ≥85% | 50–200 mPa·s | Flakes | Stock solutions; slow hydration | Fungal source | ≥85%, agreed per lot | Agreed per lot | Powder | Where a crustacean-free source is required | Technical grade | Not specified for food | Wide range | Flakes or powder | Non-food uses; not a substitute for food grade The table is a map, not a catalogue. Only the first row is the grade specified here; the others are quoted against an agreed specification. What matters commercially is that both headline numbers sit on the same certificate and the same lot. A quotation that states deacetylation and leaves viscosity to the packing list has described half a grade. ## Solubility and what the powder does in the mixer Chitosan does not dissolve in water. The free amine has to be protonated first, which is why dilute acetic acid is the standard solvent and why the catalog note says soluble in dilute acetic acid, insoluble in water and in neutral or alkaline solutions. In 1% acetic acid the polymer becomes a polycation and the solution clears; raise the pH towards neutral and it comes back out. Viscosity decides how much solid can be dissolved and how the solution behaves. A 50–200 mPa·s lot can be taken to a few percent solids with ordinary stirring; a lot above 200 mPa·s thickens sooner and traps air. Flakes hydrate slowly and usually need an overnight soak, while an 80 mesh powder wets out faster but can form lumps if it is dumped into acid all at once. The practical sequence is to disperse the powder in water first, then add the acid, or to sprinkle it into dilute acid while stirring. Undissolved gel particles, sometimes called fish eyes, come from poor wetting rather than from insolubles. The certificate's insoluble-matter figure is measured on a properly dissolved sample, so it says nothing about lumps caused by the mixing technique. ## Matching the grade to the dosage form A capsule or tablet takes the 80 mesh powder. The fill meets gastric acid, where a high-deacetylation, low-viscosity lot dissolves readily and at higher solids than a thick grade would allow. In a tablet, a higher-viscosity lot can act as a binder at a low addition, but it also changes the disintegration time, so the choice belongs to the formulator rather than to the purchase order. A powder blend is governed by flow, bulk density and segregation. Chitosan is light and can separate from denser actives in a V-blender or a sachet line; the particle-size line on the certificate and a bulk-density figure are the practical controls. A liquid or a concentrate needs a low-viscosity grade and a validated hold time, because the solution loses viscosity as it stands. The quantity per serving is a formulation and labelling decision. This page describes grades; it does not set an intake. ## What to write into the specification - “Chitosan, CAS 9012-76-4, (C6H11NO4)n, source named.” - “Degree of deacetylation ≥85% by titration, with the titration method named.” - “Viscosity 50–200 mPa·s at 1% in 1% acetic acid, with temperature and standing time.” - “Moisture ≤10.0%; ash ≤1.0%; insoluble matter ≤1.0%.” - “Heavy metals and microbiology as listed; particle size ≥95% through 80 mesh.” - “Food-grade route and allergen statement confirmed for the destination.” ## When the catalog grade is the wrong choice If the application needs a thickener, a film or a gel, the low-viscosity catalog grade is the wrong starting point: ask for a higher-viscosity lot and test it in the intended matrix. If the finished product has to avoid crustacean material, the source matters more than the deacetylation figure, and a fungal lot is a separate purchase with its own documents. A technical grade is not a cheaper food grade; it is a different specification with a different file. The product hub carries the catalog specification; the level-four comparison sets chitosan against chitin; the COA page shows how each grade figure is reported; the glucosamine page covers the monomer that comes from the same shell; the quality page describes the release workflow. ### 02.1 Chitosan vs chitin: deacetylation, solubility and the specification URL: https://nutrition.rainwoodbio.com/products/specialty/chitosan/grades/chitosan-vs-chitin/ Reviewed: 2026-11-19 Chitin and chitosan are the same polymer at different stages of deacetylation. Chitin is the acetylated parent, insoluble in water and in dilute acid; chitosan is the partially deacetylated product whose free amine protonates in dilute acetic acid and dissolves. The boundary is a degree of deacetylation, not a trade name, and the specification has to carry the number, the method and the viscosity. In one lineThe difference between chitin and chitosan is a number — the share of units that lost their acetyl group — and that number decides solubility, viscosity and the specification. ## Where chitin ends and chitosan begins The two names describe a continuum, and the cut is a convention rather than a sharp chemical edge. Chitin is roughly the fully acetylated polymer, with only a small fraction of free amine; chitosan is the deacetylated product, and the practical boundary is usually placed near 50% deacetylation, where the polymer gains enough charge to dissolve in dilute acid. Commercial chitosan is sold well above that line, typically from about 70% to more than 95% deacetylated. That range is wide enough to matter. A lot at 75% deacetylation and a lot at 90% are both called chitosan, and they differ in charge density, acid solubility, solution behaviour and the amount of acid needed to dissolve them. A purchase order that says “chitosan” without a deacetylation figure and a method has not specified which of them it wants. ## The structural difference Chitin and chitosan side by side | Property | Chitin | Chitosan | CAS number | 1398-61-4 | 9012-76-4 | Formula | (C8H13NO5)n | (C6H11NO4)n | Acetyl content | High; most units acetylated | Low; most units carry a free amine | Nitrogen | About 6.9% | About 8.4% at 85% deacetylation | Dilute acetic acid | Insoluble | Soluble | Water and alkali | Insoluble | Insoluble | Catalog specification | Not the material specified here | ≥85% deacetylated; 50–200 mPa·s The formula change is small per unit and large in effect. Removing an acetyl group takes away mass and leaves a free amine; the polymer loses about 42 mass units per converted unit, and the nitrogen percentage rises as the acetyl content falls. That arithmetic is why a nitrogen result can support or contradict a deacetylation claim. ## Why one dissolves and the other does not Chitosan dissolves because its free amine accepts a proton. In 1% acetic acid the pH is low enough that a large share of the amine groups are protonated, the polymer becomes a polycation, and the repulsion between charged chains plus the disruption of the inter-chain hydrogen bonds lets water in. Chitin has almost no free amine, so it stays neutral and heavily hydrogen-bonded, and water cannot separate the chains. The same mechanism sets the limit. Raise the pH towards neutral and the amine deprotonates, the charge disappears and the polymer precipitates; that is why the catalog note says soluble in dilute acetic acid and insoluble in water and in neutral or alkaline solutions. In practice a 1% solution is prepared by dispersing the powder in water and adding the acid slowly, or by sprinkling the powder into dilute acid while stirring. Flakes hydrate slowly and usually need an overnight soak. Solubility is also the quickest bench check that separates the two materials. A sample that dissolves to a clear or slightly hazy solution in 1% acetic acid is acting like chitosan; a sample that swells but does not dissolve is closer to chitin, whatever the label says. ## The specification that separates them For chitosan, the catalog specification is a set of numbers that describe both the deacetylation and the chain: degree of deacetylation ≥85% by titration, viscosity 50–200 mPa·s at 1% in 1% acetic acid, moisture ≤10.0%, ash ≤1.0%, insoluble matter ≤1.0% and ≥95% through 80 mesh, with the source named. The deacetylation figure without its method is not enough, because titration, NMR and FTIR can read the same lot a few points apart. A chitin specification would carry a different set of lines, because the material is not bought for acid solubility. Quoting chitin against the chitosan sheet, or accepting a lightly deacetylated chitin as “chitosan”, produces a lot that fails at the first solution. The insoluble-matter line is the quiet safeguard here: an under-deacetylated fraction shows up there as well as in the titration. The source belongs in the same specification. A shrimp, a crab and a fungal lot can all meet ≥85% deacetylation and still carry different allergen statements, ash levels and colour, and the buyer's regulatory team confirms the food-grade route for the destination. ## Viscosity: the second number that defines the grade Two lots at 85% deacetylation can behave like different materials if their chain lengths differ. Viscosity is the practical measure of that difference, and it is why the catalog grade fixes a range rather than a minimum. A 50–200 mPa·s lot dissolves to a workable solution at a few percent solids; a much thicker lot gels at the same concentration and traps air. The two numbers are linked in production. The alkali treatment that raises deacetylation also shortens the chain, so a lot pushed to a higher deacetylation figure tends to arrive with a lower viscosity. A specification that fixes both tightly narrows the process window, and a supplier who claims both extremes without a method has probably measured them differently. ## Which material to buy Buy chitosan when the application needs an acid-soluble, film-forming or solution-stable polymer: capsules, tablets and powder blends in the supplement range, and the solutions behind them. Buy a higher-viscosity grade when the job is thickening or film strength, and a fungal-source grade when the crustacean allergen has to be avoided. A chitin enquiry is a different purchase with a different specification, and it should be quoted as such rather than supplied against the chitosan sheet. The product hub carries the catalog specification; the grades page places this comparison in the wider range; the identity page gives the tests that separate the two polymers; the glucosamine page covers the monomer released when the chain is hydrolysed; the compliance page covers the source and allergen file. ### 03 Chitosan stability: moisture, colour and the viscosity drift URL: https://nutrition.rainwoodbio.com/products/specialty/chitosan/stability/ Reviewed: 2026-11-19 Chitosan is stable as a dry solid when the pack keeps moisture out, but it is hygroscopic and it depolymerises once it is dissolved in acid. The powder fails by moisture pickup, caking and colour drift; the solution fails by viscosity loss and, if it is held without a preservative, by microbial growth. Heat and shear accelerate both, so a shelf life belongs to a pack and a storage condition, not to the name of the material. In one lineThe dry powder holds its deacetylation, but moisture and acid solution both attack the chain; viscosity is the first number that moves. ## The powder: moisture, caking and colour The catalog limit is moisture ≤10.0%, which is generous by the standards of a crystalline ingredient because chitosan holds water in its amorphous regions. The limit is a release gate, not a storage allowance. A pouch that is opened and folded over takes up moisture from the air, and the powder that was free-flowing at release can cake into lumps that no longer disperse evenly. Water also enables chemistry. Over months, moisture and warmth can hydrolyse glycosidic bonds in the solid, and the viscosity of a solution made from that lot will be lower than the certificate suggests. Colour follows the same path: a lot that darkens in storage has usually been exposed to heat, moisture or air rather than to light alone. Blends add a second risk. The free amine of chitosan reacts with reducing sugars, so a powder blend that contains glucose, maltodextrin with a high dextrose equivalent or a fruit powder can brown during storage. The reaction is slow in a dry blend and faster at high water activity, which is why the blend's moisture and the sachet's barrier are part of the stability question. ## The acid solution: the least stable format Dissolved in dilute acetic acid, chitosan is a polycation with a viscosity that falls over time. The chains are cut by acid hydrolysis, and the rate rises steeply with temperature. A solution that is thick when it is made can be noticeably thinner the next morning, and a viscosity specification measured on the day of manufacture says little about the same solution after a week. The solution also darkens, and it is a good growth medium. Chitosan is not a preservative, and an aqueous solution held at room temperature without a preservative or a validated hold time is a microbiological risk. For a production line, the practical controls are to make the solution fresh, to keep it cool and covered, and to validate the hold time in the actual matrix rather than in water. Drying returns the material to a solid, but a dried film or a spray-dried powder is not automatically the same polymer that went into the solution. The thermal history of the drying step is part of the grade, and a customer who needs the viscosity on the certificate should confirm that the drying step was run under the same conditions. ## What drives degradation Factors that move chitosan during storage | Factor | What it does | Control | Moisture | Caking; enables hydrolysis; raises the as-is weight of a scoop | Sealed pouch; desiccant where needed; dry store | Heat | Accelerates hydrolysis and colour change | Controlled store; cool process; short hold at temperature | Acid pH | Depolymerisation in solution; viscosity falls | Validate the hold time; make fresh; keep cool | Oxygen and light | Colour drift, especially in solution | Opaque pack; low headspace; covered vessel | Reducing sugars | Browning in blends through the free amine | Check the blend's water activity; choose the carrier | Metal ions | Complexation and colour in solution | Avoid iron and copper contact | Microbes | Growth in an unpreserved aqueous solution | Preservative or validated hold; hygiene These factors overlap. A warm, humid store with an open pouch combines moisture and heat; a clear bottle of solution on a bench combines light, oxygen and time. The useful question is not whether chitosan is stable, but which pack, at which condition, for how long. ## A stability protocol for the ingredient A protocol states the pack, the storage condition, the time points and the tests. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% relative humidity cover the warehouse; accelerated storage at 40 °C/75% relative humidity stresses the pack. A photostability arm covers the colour failure that a dark incubator misses, and a solution arm covers the format that loses viscosity fastest. Test degree of deacetylation, viscosity under the contract conditions, moisture, appearance, insoluble matter and microbiology at each point. Report the individual results rather than a pass statement, and identify the pack and the lot family. For a blend or a liquid, repeat the work in the matrix: the ingredient's bulk data is the starting point, not the answer. Ask for the stability summary for the pack you will buy. A 1 kg pouch and a 25 kg drum differ in headspace, surface-to-volume ratio and the number of times they are opened, and the data belongs to the pack that generated it. ## The finished formula changes the answer A capsule or tablet has low water activity, but the shell and the excipients can still move moisture, and a hygroscopic chitosan fill can soften a capsule over time. Check moisture and appearance at release and after storage. A sachet depends on the foil and the seal; a pinhole is a failure, and the strip should be inspected, not only the powder. A liquid combines acid, heat, oxygen and microbes, and the viscosity the formulator measured in water is not the viscosity in a beverage with protein or minerals in it. The formulator decides whether an overage is needed; that is a label decision and does not repair an unsuitable pack. ## How the shelf life is set We do not publish a single shelf-life number for chitosan, because the pack and the storage condition set it. The assigned retest period belongs on the specification and is supported by stability data for that pack. A number without a pack, a condition and a test panel is not a shelf life; it is a claim. After the retest period, re-assay the retained sample before extending use, and re-check viscosity on a freshly prepared solution, because it is the first figure to move. The product hub lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the methods library describes the instruments; the quality page sets out the release workflow. ### 04 Chitosan: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/specialty/chitosan/moq/ Reviewed: 2026-11-19 The MOQ for chitosan is 1 kg, supplied as a 1 kg foil pouch; the standard bulk pack is a 25 kg fiber drum. Lead time is 1–7 days for the 80 mesh powder, and flakes are quoted as a separate pack. A firm quotation needs the source, the deacetylation method, the viscosity conditions, the quantity and pack, the destination and the intended use. In one lineOne kilogram is the smallest order because deacetylation and viscosity are lot properties, and a lot has to be sampled, tested and traced before it can be qualified. ## Why the minimum is 1 kg A 1 kg pack covers a bench trial, a retained sample and an independent test. That last part matters more for chitosan than for a crystalline ingredient: a viscosity check consumes a prepared solution, the deacetylation titration consumes another portion, and a referee laboratory may ask for a third. A pack that is too small to be tested twice is not a qualification sample. Chitosan is also a light powder, so 1 kg fills a pouch of roughly two to three litres and travels as a parcel rather than on a pallet. Below 1 kg, the material is usually split from a larger lot and repacked, which adds handling and breaks the link between the pack, the lot code and the certificate without changing the polymer. The 25 kg drum is the bulk unit for production; it reduces handling per kilogram but commits inventory and a longer storage period. The minimum is a pack decision, not a volume discount. It exists so that the first delivery can be sampled and traced, not to make a trial expensive. ## Packs and formats Standard chitosan packs | Pack | Net weight | Form | Typical use | Notes | Foil pouch | 1 kg | 80 mesh powder | Trial, sample, small batch | Moisture barrier; reseal after opening | Foil pouch | 1 kg | Flakes | Stock solutions | Slower hydration; soak overnight | Fiber drum | 25 kg | 80 mesh powder | Production | Inner liner; lot code on drum and liner | Fiber drum | 25 kg | Flakes | Production solutions | Liner is the moisture barrier | Custom mesh | On request | Powder | Flow or dispersion control | Particle-size line changes The catalog form is an 80 mesh powder: ≥95% through 80 mesh. A coarser or finer cut is a different specification, not a packing choice, because it moves the particle-size line and can move the lead time. The same applies to flakes: they are the same polymer at a different physical form, and a customer who needs a specific hydration behaviour should say so before the quotation. ## Lead time and dispatch The standard pack is quoted at 1–7 days from order confirmation. That window covers picking, document preparation and dispatch; it does not include shipping transit, customs clearance or the customer's own quality release. A custom mesh, a flake pack or a non-standard quantity adds time, and the quotation should state it separately. Ask for the dispatch date, not only the lead time. A 25 kg drum may travel on a pallet and a 1 kg pouch as a parcel, and the Incoterm decides who books the freight and who clears the entry. The documents should travel with the lot, not after it, because the certificate and the allergen statement are part of the delivery. ## What a quotation needs Six items make a quotation firm enough to compare: - Material and source. Chitosan, CAS 9012-76-4, with shrimp, crab or fungal source named. - Specification. Deacetylation and its method; viscosity and its conditions; moisture, ash and insoluble matter; mesh; heavy metals and microbiology. - Quantity and pack. 1 kg pouch, 25 kg drum, flakes or a custom mesh. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, specification, SDS, and the source or allergen statement the importer needs. - Intended use and market. Supplement, food or another use, and the market where it will be sold. A quotation without the source and the viscosity conditions is incomplete. The same deacetylation figure can describe two powders that behave differently in a mixer, and the allergen statement depends on the source rather than on the certificate. ## The sample is a lot, not a demonstration The 1 kg pack is the qualification sample. Test deacetylation, viscosity, moisture, ash, insoluble matter and microbiology before scaling, and keep a retained sample from the same pack. Run the viscosity test on a freshly prepared solution under the contract conditions, because a solution that has stood for a day gives a lower figure and the difference will be read as a supplier failure. If the project needs less than a kilogram for a bench trial, discuss it before ordering. A split from a bulk lot is a repack with its own traceability, not the catalog pack, and it should be documented as such. A bench sample and the production drum need not come from the same lot, and the certificate that travels with each should say which lot it covers. ## Terms to settle before the first order The quotation sets out the commercial terms, the Incoterm, the pack, the lead time and the documents. The quality terms belong beside them: the specification revision, the COA per lot, the retained sample, the retest period, the referee laboratory and the change-control route. A source change from shrimp to crab, or from shellfish to fungal, is a change control even when the two certificates look alike, because the allergen statement moves with it. Returns and replacements follow the quotation and the quality agreement. A lot that fails the agreed specification should be handled through the retained sample and a joint re-test, not through a photograph of the powder. Ask who pays for the referee test and which laboratory is acceptable to both sides. The product hub carries the catalog specification; the COA page lists the release tests; the compliance page covers the source and allergen file; the chondroitin sulfate page shows a companion specialty with its own source documents; the quality page describes the release workflow. ### 05 The regulatory file for chitosan: source, allergen and route URL: https://nutrition.rainwoodbio.com/products/specialty/chitosan/compliance/ Reviewed: 2026-11-19 Chitosan is a polymer whose regulatory file depends on the source as much as on the specification. The catalog material is a food-grade, ≥85% deacetylated chitosan from shrimp, crab or a fungal fermentation; the crustacean allergen declaration follows the shellfish route, and the buyer's regulatory team confirms the food or supplement route for the destination market. This page lists the documents and checks that belong in the file. In one lineThe specification describes the polymer; the file has to show where it came from, because the source decides the allergen statement and part of the route. ## What the file contains Chitosan adds a source question: which crustacean shell and deacetylation grade, which lot and certificate, which limits and label rules, and what changes with a new shell supply or process. The COA covers the lot, the TDS the specification and the SDS the handling; the food or supplement route is still a separate check. For chitosan, the source record sits beside those documents. A shellfish lot needs a crustacean allergen statement and a record of the shell supply; a fungal lot needs a fermentation record and a statement that no crustacean material entered the process. The two files can describe the same deacetylation and viscosity figures and still not be interchangeable. ## European Union In the EU, general food law sets the framework: the operator placing the material on the market is responsible for its safety, and the labelling rules require the material to be named accurately and the allergens to be declared. Crustacean shellfish is on the allergen list in Annex II of the labelling Regulation (EU) No 1169/2011, so a shrimp- or crab-derived chitosan lot has to be assessed against that entry, including the question of whether the process removes the allergenic protein. That is a technical question for the supplier's file and the buyer's reviewer, not an assumption to make from a certificate. The contaminant rules for the finished product sit in the current EU contaminant Regulation, (EU) 2023/915, which replaced the earlier consolidated text; check the version in force at the time of the shipment. The novel-food status of the material and the source has to be confirmed for the destination rather than inferred: the route can differ between a shellfish polymer and a fermentation-derived one, and between member states' practice. The buyer's regulatory team confirms the route against the current text. ## United States In the United States the material is normally handled through the dietary-supplement route, with the finished product made under the cGMP rules in 21 CFR 111. Where the ingredient has not been marketed as a dietary ingredient before 1994, an NDI notification under 21 U.S.C. 350b may be required, and the supplier should be able to say which basis it relies on rather than leave the question to the buyer. Labelling follows the FALCPA rules for crustacean shellfish where the source is shellfish, and the Supplement Facts panel names the ingredient as it is sold. A fermentation-derived material carries its own source description. The buyer confirms that the basis covers the finished product, the dose and the claim; the certificate does not. ## Contaminants and limits The contaminant panel is a finished-product calculation, not only a drum result. Shellfish shells can carry cadmium and lead, so the demineralisation step and the ash figure are linked to the heavy-metal result. The table is the usual starting point for a food-supplement file; the current destination text and the daily dose decide the final limit. Limits to confirm for the finished product | Parameter | Catalog limit | What the file should show | Lead (Pb) | ≤3 mg/kg | Lot result, method and the finished-product calculation | Arsenic (As) | ≤2 mg/kg | Lot result and the agreed limit for the market | Cadmium (Cd) | ≤1 mg/kg | Lot result, with the shell source named | Mercury (Hg) | ≤0.1 mg/kg | Lot result and method | Ash | ≤1.0% | The measured figure as a check on demineralisation | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g | Counts and the absence statement for the lot ## Label and claims The label names the material, the quantity and the source in the form the destination requires. The claim review is separate. A statement that chitosan contributes to a health benefit is a health claim in the EU and needs an authorisation that the buyer must verify; a statement about structure or function in the United States has its own rules and its own disclaimer. Neither is approved by a certificate of analysis. Wording that suggests treating, curing or preventing a disease is outside the food and supplement framework in both markets. The brand's regulatory reviewer confirms that the final wording is allowed for the product, the form and the market; the supplier's job is to keep the specification and the source record accurate. ## Documents the file needs - Certificate of analysis for the lot, with deacetylation, viscosity and the methods named. - Technical data sheet and the current specification version. - Safety data sheet for handling and transport. - Source record and allergen statement: crustacean for shellfish, fermentation for fungal. - Origin statement, GMO statement and, where used, a residual-solvent statement. - Food-grade statement and the heavy-metal and microbiology results. A document list with version numbers is more useful than a folder of undated files. Where a statement is not available for the lot, the gap should be named before the order, not discovered at the port. ## Checklist before the first order - Specification version, CAS 9012-76-4, deacetylation method and source are named. - The allergen statement matches the source on the certificate. - The contaminant results are converted to the finished-product dose. - The destination route has been confirmed by the buyer's regulatory team. - The label, the source description and the claim have been reviewed together. - Source, process and pack are under change control. The product hub carries the catalog specification; the COA page explains the lot certificate; the identity page covers the analytical evidence; the methods library describes the tests; the quality page describes the release file. ### 06 How we prove a chitosan lot is chitosan URL: https://nutrition.rainwoodbio.com/products/specialty/chitosan/identity/ Reviewed: 2026-11-19 A chitosan lot is identified by four agreeing measurements: the document names the material and its source, titration gives the degree of deacetylation, viscometry gives the chain length, and the solubility behaviour separates chitosan from chitin. Ash, insoluble matter and moisture close the balance. No single figure proves identity, because the material is defined by a ratio of repeat units rather than by an assay. In one lineChitosan is proved by what dissolves and what does not: the acid-soluble fraction carries the free amine, and titration, viscosity and ash have to agree with the source. ## The four identity layers A certificate can name the right material and still fail to prove it. The layers below are separate questions, and each needs its own evidence. A supplier who answers only the first has described the paperwork, not the powder. Four layers of chitosan identity | Layer | Question | Test | What it proves | Document | Is the material and its source named? | Name, CAS 9012-76-4, formula, source record | Paperwork only | Deacetylation | Is the acetyl fraction low enough? | Titration, with NMR as the reference method | Chitosan rather than chitin | Solubility | Does the free amine protonate? | Dissolution in 1% acetic acid; insolubility in water and alkali | The behaviour of a deacetylated polymer | Chain length | Which viscosity grade is it? | Viscometry at 1% in 1% acetic acid | Consistency with the declared grade | Mass balance | Is it diluted or contaminated? | Moisture, ash, insoluble matter | Consistency of the numbers ## The deacetylation ratio and the nitrogen cross-check Degree of deacetylation is a ratio: the number of glucosamine units with a free amine divided by the total number of units. The titration measures the free amine directly after the polymer is dissolved, which is why the dissolution step has to be complete before the endpoint is read. Proton NMR measures the acetyl protons against the anomeric protons and is the reference method; the two methods can differ by a few points on the same lot. Nitrogen gives an independent check on the same ratio. Every repeat unit carries one nitrogen whether or not it carries an acetyl group, but the acetyl group adds mass, so the nitrogen percentage falls as the acetyl content rises. A fully deacetylated chitosan is about 8.7% nitrogen, a lot at 85% deacetylation is about 8.4%, and chitin is about 6.9%. A nitrogen figure near 8.4% is consistent with an 85% claim; a figure near 7.5% suggests a lot closer to chitin or a diluted material, and the titration should be repeated with the NMR reference before the lot is accepted. Nitrogen by Kjeldahl is not a release test here, and it does not replace the titration. It is the arithmetic check that catches a certificate whose deacetylation figure and composition cannot both be right. ## X-ray diffraction: the solid-state check X-ray diffraction answers a different question: what crystalline order does the solid have? Alpha-chitin gives relatively sharp reflections near 9° and 19° two-theta, while a deacetylated chitosan shows a broader pattern with a strong reflection near 20° and a weaker one near 10°. The loss of the chitin reflections and the broadening of the pattern are consistent with deacetylation, and the degree of crystallinity also depends on the source, the drying step and the residual moisture. XRD is not a release test for this product, and a certificate that says only “XRD conforms” without a pattern or a reference has added little. It is useful when the question is solid form: a highly crystalline lot and an amorphous lot of the same deacetylation behave differently in a mill and in a capsule fill. Ask for the pattern, the reference and the detection limit behind any match statement. ## What adulteration looks like Substitutions and the signals that catch them | Adulterant | What it does | Signal | Test | Under-deacetylated chitin | Lowers the free-amine count; raises insoluble matter | Deacetylation low; insoluble matter high; nitrogen low | Titration, insolubles, nitrogen | Starch, maltodextrin or glucose | Dilutes the polymer; feeds browning in a blend | Nitrogen low; viscosity low; iodine reaction | Nitrogen, FTIR, viscosity | Silica or salt | Adds weight that does not dissolve | Ash high; insoluble matter high | Ash, ICP-OES | Another hydrocolloid | Matches the viscosity, not the chemistry | Solution behaves differently; IR bands differ | FTIR, NMR, acid solubility | Water | Raises the as-is weight; lowers the effective grade | Moisture high; powder cakes | Moisture, appearance Appearance is the weakest signal. Off-white to pale yellow covers a wide range, and a darker lot can be a legitimate drying difference or a different source. The stronger signals are the deacetylation figure with its method, the nitrogen cross-check, the ash and the insoluble matter, because those four move together when the material is not what the label says. ## How to write identity into the specification - “Chitosan, CAS 9012-76-4, (C6H11NO4)n, source named.” - “Degree of deacetylation ≥85% by titration; method stated on the certificate.” - “Viscosity 50–200 mPa·s at 1% in 1% acetic acid, with temperature and standing time.” - “Soluble in dilute acetic acid; insoluble in water and in neutral or alkaline solutions.” - “Moisture ≤10.0%; ash ≤1.0%; insoluble matter ≤1.0%; ≥95% through 80 mesh.” - “Nitrogen and XRD reported where the identity is disputed.” ## Five questions for the supplier - Which source is this lot, and what does the allergen statement say? - Which titration method produced the deacetylation figure, and can you provide the NMR reference result? - What are the viscosity conditions, and how long did the solution stand before it was measured? - What are the ash and insoluble-matter results for this lot? - If the lot is disputed, will you accept a joint re-test on the retained sample? Five direct answers amount to an identity file; a single deacetylation percentage does not. The product hub carries the catalog specification; the COA page shows where each figure sits on the certificate; the level-four comparison sets chitosan against its parent polymer; the methods library covers the instruments; the quality page describes the release workflow. ### 01 Reading the citicoline COA: assay, water and the salt form URL: https://nutrition.rainwoodbio.com/products/specialty/citicoline/coa/ Reviewed: 2026-11-19 The citicoline certificate lists the physical checks, the HPLC identity and assay, water, pH, the heavy-metal panel and the microbiological result. It also has to identify the form, because the free acid and the sodium salt are separate materials with separate CAS numbers and label names. The limits below are the catalog gates; each lot's measured result belongs beside them. In one lineWithout the form, the HPLC basis and the water figure, a citicoline percentage cannot be compared with another certificate. ## The certificate as a test report A laboratory report is read line by line: what was tested, how, against which limit, and what the sample gave. A verdict such as “conforms” is only the summary of those four pieces. The table is the catalog specification, not a batch result; a lot certificate repeats the gate in one column and puts the measured figure in another. Identity, assay, water and contaminants · citicoline free acid, catalog limits | Parameter | Method | Release limit | Appearance | Visual | White powder | Identification | HPLC retention and UV spectrum | Conforms to the reference | Assay | HPLC with UV detection | 98.0–102.0% (free acid; basis stated) | Water | Karl Fischer titration | ≤5.0% | pH (5% solution) | Potentiometric | 2.5–4.5 | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent The identity line is the one that decides whether the powder is citicoline. The assay line decides how much is there, and the water line decides what the assay denominator is. None of the three stands alone. The pH line is specific to a 5% solution of the free acid; it is not a generic statement about every citicoline salt. ## Two bases: moisture and the salt form Two different questions sit under the word basis, and a certificate has to answer both. The first is moisture: the result can be calculated on the powder as received or on the dried solids. The catalog range is 98.0–102.0% by HPLC, but the certificate should say which denominator produced the number. A lot at 98.0% as-is with 5.0% water works out to 103.2% on the dried basis, above the 102.0% ceiling; the same lot at 98.0% anhydrous is about 93.1% as-is. Both figures can be honest, and they are not the same figure. The second question is the form. The free acid and the sodium salt are separate standards. A sodium-salt result of 98.0% is not 98.0% free acid: the sodium-bearing molecule is 510.31 g/mol against 488.32 g/mol, so the free-acid equivalent is 93.8% of the powder and sodium is about 4.4% of its mass. If the certificate says “citicoline 98%” and nothing else, the reader cannot tell which powder the drum contains. Three ways a 98.0% assay can be written | Form and basis | Free-acid equivalent | What else moves | Free acid, anhydrous | 98.0% | About 93.1% as-is at 5.0% water | Free acid, as-is | 98.0% as-is | About 103.2% on the dried basis, outside the ceiling | Sodium salt, anhydrous | 93.8% | About 4.4% sodium; its own reference standard The remedy is documentary: name the form in the specification, print the basis in the assay row, and show the water result beside it. When two suppliers are compared, compare the same basis or ask for the calculation. ## Release limit versus batch result Each release limit is the boundary for the lot; each batch result is a measurement. If the result column simply repeats the range, the certificate has not reported a result. Heavy metals belong per element, because a total hides the metal that matters. Microbiology needs a count and an absence statement, not a tick box. Water is just as important. A figure close to 5.0% passes, but it leaves little room for a humid store or a slow repack. The pH of a 5% solution is another edge: the free acid is specified at 2.5–4.5, and a reading at the edge should send the laboratory back to the meter, the dilution and the age of the sample before the lot is rejected. ## What moves between batches Water and pH are the first lines to move. The drying step and the final isolation change the water; residual acid or a neutralisation step changes the pH; both can move an as-is assay. Colour and related-substance peaks usually drift more slowly, and a new peak matters more than a small shift in the main peak. Granulation changes flow and particle size, but the catalog sets no sieve figure. A capsule line that needs a defined particle profile needs a separate specification, not an assumption about the standard powder. A trend across three or four lots is more informative than one result near an edge: water rising, pH drifting one way, or assay falling as water climbs. Ask for the trend and the retained samples. ## When to order an outside test An outside test is worth ordering for a new source, a disputed form, a first shipment into a regulated market, or a label declaration that the supplier's certificate does not support. The panel should be targeted: HPLC with a UV spectrum, water by Karl Fischer, sodium by ICP-OES for the salt, phosphorus for the nucleotide, the heavy-metal panel, microbiology and residual solvents. The report should give a detection limit for every screen; “not detected” means little unless the reader knows how low the method can see. Keep the retained sample and the chain of custody, because a disputed result is settled on the sample that both sides hold. ## What to compare between suppliers Compare six lines: the form and its CAS number; the assay and the basis it is reported on; water and pH; the sodium figure where the salt is claimed; heavy metals and microbiology; pack, lot code and retest date. Two certificates can print the same percentage and still describe different materials. The citicoline product page carries the catalog specification. The tests that separate the two forms are on the identity page; the label consequences are on the citicoline versus Alpha-GPC page; the market documents are on the compliance page. The separation is described in the HPLC method note, and the quality page sets out the release sequence. ### 02 Citicoline free acid or sodium salt: choosing the form URL: https://nutrition.rainwoodbio.com/products/specialty/citicoline/grades/ Reviewed: 2026-11-19 The catalog grade is citicoline free acid, CAS 987-78-0, specified at 98.0–102.0% by HPLC. The sodium salt, CAS 33818-15-4, is a separate material: it carries about 4.5% sodium, has its own assay reference and needs its own label name. The choice changes the mass that delivers a label dose, the pH in a drink mix and the documents in the market file, not just the name printed on the certificate. In one lineThe form is the grade: the free acid and the sodium salt have different CAS numbers, assay bases and label names. ## Why citicoline comes in two forms Citicoline is a nucleotide derivative: a cytidine group, a diphosphate bridge and a choline group in one molecule. The free acid carries the acidic proton on the phosphate; the sodium salt replaces that proton with one sodium ion. The change is small in structure and large in paperwork, because it produces a different CAS number, a different molecular formula and a different molecular weight. The free acid is the form specified in this catalog. The sodium salt is bought and sold as its own grade, with its own certificate and its own label name. A purchase order that says only “citicoline” has not chosen between them, and a quotation that does not name the form cannot be compared with one that does. ## The two forms side by side Citicoline free acid and citicoline sodium | Property | Free acid | Sodium salt | CAS number | 987-78-0 | 33818-15-4 | Formula | C14H26N4O11P2 | C14H25N4NaO11P2 | Molecular weight | 488.32 | 510.31 | Sodium content | None | About 4.5% by mass | Assay (catalog) | 98.0–102.0% by HPLC | Its own specification and reference standard | Water | ≤5.0% | Own specification | pH (5% solution) | 2.5–4.5 | Own specification | Label ingredient | Citicoline or CDP-choline | Citicoline sodium | Free-acid factor | 1.000 | 0.9569 The factor is the ratio of molecular weights: 488.32 ÷ 510.31 = 0.9569. It converts a sodium-salt mass or result into free-acid equivalent. It does not convert the label name, the sodium figure or the regulatory file. Those follow the form, not the arithmetic. ## Powder, solution and the pH difference Both forms are white, hygroscopic powders that dissolve freely in water. The free acid gives an acidic solution: the catalog sets pH 2.5–4.5 for a 5% solution. That acidity is a formulation variable, not a defect. In a stick pack or a drink mix, the formulator checks the finished pH, the taste and the container compatibility; a buffer may be needed, and the buffer itself becomes part of the stability work. The sodium salt has its own pH and water specification. It should not be assumed to match the free acid, and a certificate written for one form should not be read as evidence for the other. Both forms cake when they take up water, and both need a moisture-barrier pack with a proper seal. Solubility is not a way to tell them apart, because both dissolve; the sodium figure and the pH are the practical discriminators. ## Dose arithmetic and the label The label can name the ingredient or the choline it supplies, and the two declarations need different arithmetic. If a label declares 500 mg of citicoline as the free acid, the free acid is what is weighed. If the sodium salt is used instead, 500 ÷ 0.9569 = 522.5 mg of the salt delivers the same free-acid equivalent, and that mass brings about 23.5 mg of sodium. The capsule fill weight changes by 22.5 mg before any excipient is added. If the label declares choline, the form still decides the figure. The free acid is about 21.3% choline by mass and the sodium salt about 20.4%, so 500 mg of the free acid supplies about 107 mg of choline and 500 mg of the salt about 102 mg. Neither number is a recommended intake; both are the arithmetic that keeps the panel and the weigh-up consistent. The dosage form then decides the fill. A capsule or tablet is weighed as a solid and sized on the labelled ingredient. A sachet or a drink mix uses the freely soluble form, but the free acid's acidity has to be checked against the finished pH. In every case the label names the form that was weighed, not a generic “citicoline”. ## What to write into the specification - “Citicoline free acid, CAS 987-78-0, C14H26N4O11P2, molecular weight 488.32.” - “Assay 98.0–102.0% by HPLC with UV detection; state the moisture basis and the reference standard.” - “Water ≤5.0% by Karl Fischer; pH of a 5% solution 2.5–4.5.” - “Identification by HPLC retention and UV spectrum against the citicoline reference.” - “Heavy metals and microbiology as listed on the catalog specification.” - “Pack, lot code and destination market stated on the purchase order.” For the sodium salt, the specification starts with CAS 33818-15-4 and the sodium-bearing formula, and it adds the sodium figure. A specification written for the free acid does not cover the salt, even when the assay range looks the same. ## When the other form does not fit If the label or the market file names the free acid, the sodium salt is not a drop-in; the label and the balance would name different materials. If the label names citicoline sodium, the free acid is equally wrong, because the sodium figure and the ingredient name would disappear. Handle a form change as a new product: new specification, new certificate and a fresh label review. The citicoline product page carries the catalog specification. The level-four comparison sets citicoline beside Alpha-GPC, another choline-containing ingredient with a different molecular weight and label; the Alpha-GPC product page carries that specification. The COA page records the form on the certificate, and the compliance page covers the documents that follow the choice. ### 02.1 Citicoline vs Alpha-GPC: two choline forms, two labels URL: https://nutrition.rainwoodbio.com/products/specialty/citicoline/grades/citicoline-vs-alpha-gpc/ Reviewed: 2026-11-19 Citicoline and Alpha-GPC are both choline-containing ingredients, but they are not interchangeable. Citicoline is a cytidine diphosphate choline molecule of 488.32 g/mol as the free acid, or 510.31 g/mol as the sodium salt, carrying about 21% choline by mass as the free acid. Alpha-GPC is a glycerol phosphate choline molecule of 257.22 g/mol, carrying about 40%. The difference changes the mass that delivers a given choline figure, the way the powder behaves in storage and the name that has to appear on the label. In one lineCiticoline and Alpha-GPC both carry choline, but the molecule around it sets the choline figure, the dose and the label. ## Two molecules, one shared group The shared part is choline. In citicoline it is attached through a diphosphate bridge to cytidine; in Alpha-GPC it is attached through a phosphate ester to glycerol. The rest of the molecule is not a detail: it sets the molecular weight, the assay reference, the counter-ion and the label name. Citicoline forms and Alpha-GPC compared | Property | Citicoline free acid | Citicoline sodium | Alpha-GPC | CAS number | 987-78-0 | 33818-15-4 | 28319-77-9 | Formula | C14H26N4O11P2 | C14H25N4NaO11P2 | C8H20NO6P | Molecular weight | 488.32 | 510.31 | 257.22 | Choline in the molecule | About 21.3% | About 20.4% | About 40.5% | Sodium | None | About 4.5% | None in the catalog grade | Catalog assay | 98.0–102.0% | Own specification | 85.0–90.0% | Water | ≤5.0% | Own specification | ≤3.0% | Label name | Citicoline or CDP-choline | Citicoline sodium | Alpha-GPC or L-alpha-glycerylphosphorylcholine The sodium salt is a separate grade with its own CAS number and certificate. The Alpha-GPC catalog grade is an 85% powder, and the grade number belongs in the specification because the 50% and 85% grades are different fill weights. ## The choline figure and its denominator The choline fraction is the mass of the choline group divided by the molecular weight: about 104.17 ÷ 488.32 = 21.3% for citicoline free acid, 104.17 ÷ 510.31 = 20.4% for the sodium salt, and 104.17 ÷ 257.22 = 40.5% for Alpha-GPC. These are molecule figures. The powder figure is the assay multiplied by the fraction. The denominator matters most for Alpha-GPC. Its catalog choline figure is calculated on the Alpha-GPC content, not on the powder. At the 85% grade, the powder carries about 34.4% choline; at the 50% grade, about 20.2%. A choline number quoted without its denominator is not comparable with another ingredient's number, and the same is true of a citicoline assay quoted without its moisture basis. Choline delivered by 500 mg of each ingredient | Ingredient | Choline per 500 mg | What the figure includes | Citicoline free acid | About 107 mg | 21.3% of the molecule, before moisture | Citicoline sodium | About 102 mg | 20.4% of the molecule, plus 22.5 mg sodium | Alpha-GPC 85% powder | About 172 mg | 85% assay × 40.5% choline | Alpha-GPC 50% powder | About 101 mg | 50% assay × 40.5% choline The 500 mg comparison is arithmetic, not a dose recommendation: it shows why a gram-for-gram swap changes the choline declaration. ## Hygroscopic powders, different failure modes Both materials take up water, and both need a sealed, moisture-barrier pack. Citicoline is hygroscopic and cakes; the free acid gives an acidic solution at pH 2.5–4.5 in the 5% test. Alpha-GPC is deliquescent, so a pack that merely slows moisture pickup for citicoline may be insufficient for Alpha-GPC, and an opened pouch can become sticky before it cakes. The water limits differ: ≤5.0% for the citicoline catalog grade and ≤3.0% for the Alpha-GPC 85% grade. That difference is a release gate, not a ranking of stability. Both molecules can hydrolyse, and the susceptible bond sits in a different place, so a stability result for one ingredient does not transfer to the other. The pack, the grade and the matrix decide the retest period. The two solutions also behave differently in a drink mix, so the formulator checks the finished pH, taste and hold time in the actual matrix. Neither ingredient should be described as stable without naming the pack and the condition. ## Dose arithmetic for the same choline figure If a label declares 100 mg of choline, the mass of ingredient depends on the molecule and the grade. Citicoline free acid needs 100 ÷ 0.2133 = 469 mg; the sodium salt needs 100 ÷ 0.2041 = 490 mg. Alpha-GPC as the pure molecule needs 100 ÷ 0.405 = 247 mg, and the 85% powder needs 247 ÷ 0.85 = 291 mg. The same choline declaration therefore corresponds to very different fill weights. If the label declares the ingredient instead, the arithmetic runs the other way. A 500 mg citicoline free-acid dose supplies about 107 mg choline; a 500 mg Alpha-GPC 85% dose supplies about 172 mg. Matching the Alpha-GPC choline figure with citicoline would need about 806 mg of the free acid. That is a fill-weight decision, not a substitution. The sodium salt adds a second label figure. A 500 mg sodium-salt dose carries about 22.5 mg sodium, which the nutrition panel may have to declare. The free acid carries none. Neither figure is a recommended intake; both are the arithmetic that keeps the panel and the weigh-up consistent. ## What the label has to name The ingredient name follows the molecule, not the choline figure. Citicoline is labelled as citicoline, CDP-choline or citicoline sodium, depending on the form. Alpha-GPC is labelled as Alpha-GPC or L-alpha-glycerylphosphorylcholine. The buyer's regulatory team confirms which name the destination accepts; this page does not assert that either ingredient is authorised in a named market. If the panel declares choline, the conversion from the ingredient to choline belongs in the label file, with the form and the grade stated. If the panel declares the ingredient, the form and the quantity are the declaration, and the choline figure is supporting information. A label that says “choline” without the source, or “citicoline” without the form, has left the reader to guess which powder was weighed. The two ingredients cannot share one label sentence unless the panel names both. A formula that changes from one to the other needs a new specification, a new certificate and a new label review, even when the choline figure is held constant. ## When to choose which Choose by the label ingredient and the market file first. If the label names citicoline, Alpha-GPC is not a drop-in; if the label names Alpha-GPC, citicoline is not either. The choline figure is a useful check on the arithmetic, not a permission to substitute. Choose citicoline when the specification and the market file are built on citicoline, and choose the free acid or the sodium salt as a separate decision. Choose Alpha-GPC when the label and the file call for it, and name the 50% or 85% grade because the fill weight changes with the grade. Changing direction means a new specification, a new certificate and a fresh label review. The citicoline product page carries the catalog specification; the Alpha-GPC product page carries the other. The grades page compares the free acid and the sodium salt; the stability page covers the pack; the compliance page covers the documents; the identity page sets out the tests behind the form claim. ### 03 Citicoline stability: water, pH and the pack URL: https://nutrition.rainwoodbio.com/products/specialty/citicoline/stability/ Reviewed: 2026-11-19 A sealed moisture-barrier pack is what keeps citicoline powder within specification for a defined period. The free acid is hygroscopic and gives an acidic solution, so water uptake and pH both matter; the as-is assay falls as moisture rises. Shelf life comes from stability data for the exact pack, not from the release certificate. In one lineCiticoline fails through water first: the powder picks it up, the as-is assay falls, and the seal decides how long the specification holds. ## The powder: water is the first variable The catalog caps water at 5.0%. That is a release test, not a description of how the powder behaves after the pouch is opened. Moisture enters from the room, the water result climbs, the powder cakes and the as-is assay drops because dry matter is a smaller share of the weighed powder. The free acid gives an acidic environment, and acid plus water plus time drives hydrolysis. A damp powder held warm is enough to move the related-substance profile; a liquid phase is not required. Keep the pouch sealed and the store dry and cool, and let a cold pack reach room temperature before opening so condensation does not form on the powder. Do not repack into a clear jar. Keep the original foil, or use an opaque container with a close-fitting lid, and split a frequently opened pouch into smaller sealed portions. ## The solution: acidic, hydrolytic and less forgiving Citicoline dissolves freely. A 5% solution of the free acid reads pH 2.5–4.5, so a drink mix starts acidic. Hydrolysis of the phosphate linkages is the main route in solution, and heat and pH change its rate. A ready-to-drink line adds pasteurisation or hot fill, a heat load the powder never meets; a stick pack keeps the ingredient dry until the consumer adds water. Where a liquid is unavoidable, pH and heat become process parameters. Validate the hold time in the finished matrix and keep the pack dark. Powder data cannot stand in for a beverage test; the matrix, the process temperature, the headspace and the pack each set a different rate. ## What drives degradation Factors that move citicoline during storage | Factor | What it does | Control | Water | Hygroscopic uptake; caking; lower as-is assay; hydrolysis | Sealed foil pouch; dry store; desiccant where needed | pH | Acidic solution; changes the hydrolysis rate | Specify the 5% pH; validate the matrix pH | Heat | Accelerates hydrolysis and moisture migration | Cool store; control process temperature | Pack integrity | A pinhole or a failed seal lets water in | Inspect seals and liners; keep the drum liner closed | Time | Related substances accumulate slowly | Set a retest period; trend the impurity profile The factors reinforce one another. A warm, humid store with a folded-over pouch is worse than three separate effects, and an acidic solution held warm combines the pH and heat terms. The answer has to name the pack, the matrix and the time, or it is not an answer. ## A stability protocol for the ingredient A stability file is built around conditions, time points and a test panel. The usual trio is: Storage conditions for a citicoline stability file | Condition | Temperature and humidity | Purpose | Long-term | 25 °C / 60% RH | Warehouse baseline | Intermediate | 30 °C / 65% RH | Warm market | Accelerated | 40 °C / 75% RH | Pack stress Choose the storage arms before the first pull; if the pack is clear, add a light arm to the three conditions above. At each pull, test assay, water, pH, appearance, related substances and microbiology. A drink or sachet needs its own matrix run at the process pH and heat load, because powder data will not predict it. The final report should list every result and name the pack and the lot family. Request the file that matches the pack on the order; a pouch and a drum do not share headspace or opening history. ## The finished formula changes the answer Capsules and tablets are dry, but not sealed from their own shell and excipients. Check water and appearance on storage, and check that the acidic free acid has not shifted the blend pH or attacked the coating. A sachet is only as good as its seal: a pinhole ruins the strip. In a drink, pH, heat, oxygen and time act together, and bulk powder data is only the baseline. Overage is a formulation choice, not a fix for a leaky pack. ## How the shelf life is set No single shelf-life figure applies to every citicoline pack. The retest period is written against a pack and a storage condition, and it rests on the stability file for that combination. A number quoted without those details is not usable. When the period ends, re-test the retained sample; the new result, not the calendar, decides whether use continues. A figure from a drum does not transfer to a pouch. The catalog limits are on the product page. Release testing is on the COA page; packing and lead time on the MOQ page; the assay on the HPLC note; the release sequence on the quality page. ### 04 Citicoline MOQ: 1 kg, packaging and lead time URL: https://nutrition.rainwoodbio.com/products/specialty/citicoline/moq/ Reviewed: 2026-11-19 Citicoline starts at a 1 kg foil pouch, with a 25 kg fiber drum as the bulk pack. The standard catalog pack is quoted with a 1–7 day lead time. A firm quote depends on six answers: which form, on what assay basis, in which pack and quantity, to which destination and Incoterm, with which documents, and for which end market. In one lineThe 1 kg pouch is the unit of qualification: a lot code, a retained sample and a certificate that travel together. ## Why the minimum is 1 kg The smallest catalog unit holds enough for a bench run, a retained sample and a third-party check, and it can travel as a parcel. It is a lot with a code, not a scoop from a drum. A formulator who wants bench work under way before the production plan is settled can use this pack without committing to a drum. Anything smaller is a repack. The material is split from a larger lot, handled again and given a new record; the chemistry is unchanged, but the pack history is not. The 25 kg drum reduces handling per kilogram, but it ties up inventory and a longer storage period. Because citicoline is hygroscopic, a drum that is opened repeatedly can take up more water than several sealed pouches. The minimum is the smallest pack that can be sealed, labelled and traced. ## Packs and formats Standard citicoline packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal after opening; keep the lot code | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Separate particle specification; lead time may change Granulation is a separate specification, not a packing decision: particle profile, flow and dust all change, and the lead time may move with them. Agree it before the quote. The pack must also match the form; sodium salt uses the same pack sizes but a different specification and label name. A drum liner left open between uses is a moisture path, so close it and write the opening date on the label. ## Lead time and dispatch The catalog pack leaves the warehouse in 1–7 days from confirmation. That covers picking, paperwork and dispatch, not transit, customs or the customer's release. A custom granulation or unusual pack size also needs extra time; keep that line separate on the quote. Ask when it ships, not just how long the lead time is. A drum may go on a pallet and a pouch as a parcel. Freight booking and entry clearance follow the Incoterm, and the lot should travel with its documents. The certificate and packing list should reach the buyer with the goods, not in a later email. ## What a quotation needs Six details make two quotes comparable: - Form and CAS number. Citicoline free acid, 987-78-0, or citicoline sodium, 33818-15-4. - Specification. Assay, assay basis, water, pH, heavy metals and microbiology. - Pack and quantity. A 1 kg pouch, a 25 kg drum or a granulated grade. - Destination and Incoterm. Country, port or address, plus the trade term. - Documents. The COA, specification, SDS and any importer statement. - End use and market. Supplement, food or other, and where it will be sold. A quote that says only “citicoline” leaves the form open, and the free acid and the sodium salt are different purchases with different labels. Commercial terms are on the quote, not this page. ## The sample carries a lot code The 1 kg pouch is the qualification lot. Before scale-up, check identity, assay, water, pH and microbiology, and retain material from the same pack. Pouch, certificate and quote should share one lot code. Without that code, the sample is a demonstration. For less than 1 kg, ask first. A smaller bench quantity is cut from a bulk lot, so it becomes a repack with a new record rather than the catalog pouch. The bench sample and the production drum need not come from the same lot. ## What to settle before ordering Commercial terms live on the quote: Incoterm, pack, lead time and documents. Quality terms live beside them: specification revision, COA per lot, retained sample, retest period and change control. Put the quality agreement in place before the first production order; a dispute is the wrong time to draft one. Returns and replacements follow the quote and the agreement. If a lot fails the agreed specification, the retained sample and a joint re-test decide, not a photograph. Name the referee laboratory and who pays for it before the order. Start with the citicoline product page for the catalog limits. What is tested is on the COA page; the market documents are on the compliance page; the MOQ glossary entry defines the term; freight and paperwork are covered on the logistics page. ### 05 The regulatory file for citicoline URL: https://nutrition.rainwoodbio.com/products/specialty/citicoline/compliance/ Reviewed: 2026-11-19 Citicoline appears on the market as the free acid (CAS 987-78-0) or the sodium salt (CAS 33818-15-4), so the regulatory file has to begin with the form that will be placed on the market. The buyer's regulatory team owns the route for the destination; this page maps the documents and checks the supplier can support, and it is not a substitute for the current legal text. In one lineThe form on the certificate and the form in the market file have to be the same molecule, or the label and the route stop matching. ## What the file contains Think of the file in two layers. The material layer holds the specification, the certificate and the analytical data for the lot. The market layer holds the regulatory route, the contaminant ceilings and the label wording. The supplier owns the first; the buyer's regulatory team owns the second, and neither layer can be completed by the other. The material layer starts with the form. Citicoline free acid, CAS 987-78-0, and citicoline sodium, CAS 33818-15-4, are different ingredients for labelling and for the file. One form, one CAS number and one name should run through the specification, the certificate and the label. A folder that mixes the two is not a file for either. ## European Union EU review usually opens with three files: the purchase specification, the contaminant panel and the draft label. General food law, labelling and contaminant rules sit around any product-specific route. Some markets have an entry for a citicoline form; read the current text for the form it names, the source conditions and any maximum level. The free acid and the sodium salt may fall under different texts. This page takes no position on whether either form is authorised in the EU. The buyer's team checks the member state route and confirms that the specification describes the material on the market. GB and Northern Ireland are separate checks: GB has its own register and labelling rules, while Northern Ireland follows the EU framework. ## United States US review asks a narrower question first: does this exact dietary ingredient, used as intended, have a lawful route? The supplier can explain the basis and supply the supporting document; the buyer decides whether that basis reaches the finished product and the statement. “Citicoline” and “citicoline sodium” are not interchangeable names on a panel. The label and the claim sit outside the certificate. The brand's reviewer signs off both, and a supplier letter does not replace that review. Federal and state requirements current on the day of review decide, not a summary on this page. ## Contaminants and the finished-product calculation Contaminant limits are written for the supplement as sold. A raw-material result has to be read against the daily dose and the ingredient's share of the formula. The figures below are a reference point, not a universal ceiling. Contaminant limits to confirm for the finished product | Parameter | Typical supplement reference | What the file should show | Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method, limit and the finished-product calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception that applies | Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result and method | Arsenic (As) | Customer or market limit | The agreed limit and the method, stated on the certificate Water ≤5.0% is a quality limit, not a contaminant ceiling. The sodium salt adds sodium to the finished product, and that figure belongs in the label review even though it is not a contaminant. The conversion uses the daily dose and the formula share, not the drum result alone. ## Label and claims Label review has two separate jobs. The first is to describe the material: name, form and quantity. If the panel declares choline, the conversion belongs there too: citicoline free acid is about 21.3% choline by mass and the sodium salt about 20.4%, so the ingredient mass and the choline mass are different numbers. If the panel declares the ingredient, the form and the quantity are the declaration. The second job is the claim. The brand's reviewer signs off the wording for the product, form and market; a certificate cannot approve a claim, and a claim cannot amend a specification. This page is technical, not promotional, and makes no disease-related statement. ## The document pack The supplier can usually provide: - A lot COA with appearance, identity, assay, water, pH, heavy metals and microbiology. - A technical data sheet and a purchase specification that name the form and the CAS number. - A safety data sheet in the 16-section format. - Allergen, GMO, origin and residual-solvent statements. - The specification version, the pack and the retest period. - An independent COA where the buyer asks for one. Every document should carry a version or a lot reference. A data sheet without a version and a certificate without a lot number do not make a pair. ## Checklist before the first order Before the purchase order: - The specification, COA and label use one form name, one CAS number and one ingredient name. - The assay basis and water result are printed; the sodium figure appears where the salt is claimed. - Contaminant results are worked back through the daily dose. - The label and claim have been reviewed for the destination, including any choline declaration. - Any change to source, process or pack runs through change control, and the route is confirmed. - Quotation, specification and certificate are on the same version. The citicoline product page carries the catalog specification. For the lot document, see the COA page; for the analytical checks, the identity page; for the supplier release sequence, the quality page; for the EU framework, the EU regulatory note. ### 06 How to prove a citicoline lot is the named form URL: https://nutrition.rainwoodbio.com/products/specialty/citicoline/identity/ Reviewed: 2026-11-19 The certificate proves the form only when the HPLC retention and UV spectrum, the sodium result, the water figure and the assay tell the same story. A percentage on its own cannot tell the free acid from the sodium salt, and it cannot tell either one from a diluted powder. Ask for the chromatogram, the counter-ion result and the moisture basis before accepting the name on the label. In one lineThe assay measures the nucleotide; the sodium figure identifies the salt, and the water result shows how much of the powder is dry matter. ## Four checks, four questions The four checks below are independent. A supplier who provides only the first has repeated the label, not demonstrated the lot. Four checks of citicoline identity | Layer | Question | Test | What it proves | Document | Is the form named? | Name, CAS number, formula | Paperwork only | Chromatography | Is the nucleotide citicoline? | HPLC retention and UV spectrum | The molecule, not the form | Counter-ion | Is it the free acid or the sodium salt? | Sodium by ICP-OES | The salt form | Mass balance | Is it diluted or wet? | Assay, water, related substances | Consistency of the numbers ## The sodium and phosphorus ratios Citicoline sodium is a monosodium salt, so its theoretical sodium content is 22.99 ÷ 510.31 = 4.50%. The free acid contains none. A sodium figure near 4.5%, with an assay in range, supports the salt; a low figure points to the free acid or a dilution; a high figure suggests another sodium source. Sodium is not a catalog parameter, so it is an extra test, ordered when the form is disputed or a new source is qualified. Phosphorus adds a second check. Citicoline has two phosphorus atoms per molecule: 12.69% by mass in the free acid and 12.14% in the sodium salt. A figure near the theoretical value supports the diphosphate; a low figure next to a clean UV peak suggests a less phosphorylated nucleotide, or a dilution. Choline is a third check, at about 21.3% of the free acid and 20.4% of the salt. The molecule should show two phosphorus atoms for every choline group. A blended powder can also be built to sit inside the assay range. Its sodium figure will land between zero and 4.5% according to the salt fraction; the assay measures all of the citicoline, while the sodium figure measures only the salt fraction. ## X-ray diffraction: the solid-state check XRD looks at the solid state: whether the powder is crystalline, partly crystalline or amorphous, and whether the pattern matches a reference. A change here can alter bulk density, flow and dissolution even when the assay stays put, which matters when a capsule line has been validated on one powder and a later lot flows differently. XRD does not measure purity or the counter-ion, and it is not a routine release test. Before accepting a “match”, request the reference diffractogram and the method's detection limit. “XRD conforms” on its own, with no pattern and no reference, tells the reader almost nothing. ## What adulteration looks like Common citicoline substitutions and the signals | Adulterant | What it does | Signal | Test | Choline chloride or bitartrate | Cheap choline source with no cytidine | Low phosphorus; no nucleotide peak; high choline | HPLC-UV, phosphorus, choline | Cytidine monophosphate or cytidine | Similar UV chromophore, fewer or no phosphates | Low phosphorus and low choline; different retention | HPLC-UV, phosphorus, choline | Dilution with a sugar or carrier | Lowers assay; changes water and flow | Assay low; water or ash high | Mass balance, HPLC | Wrong citicoline form | Free acid sold as salt, or the reverse | Sodium off 4.5% or near zero; pH shift | Sodium by ICP-OES, pH | Water | Lowers the as-is assay; cakes the powder | Water high; anhydrous assay normal | Karl Fischer Appearance is the weakest signal: both forms are white powders, and a diluent can match the colour. The sodium figure, the phosphorus and choline ratios and the mass balance carry more weight. A certificate with appearance and assay but no identity evidence has not tested the substitution that matters most. ## How to write identity into the specification - “Citicoline free acid, CAS 987-78-0, C14H26N4O11P2.” - “Assay 98.0–102.0% by HPLC with UV detection; state the moisture basis and the reference standard.” - “Identification by HPLC retention and UV spectrum against the citicoline reference.” - “Water ≤5.0% by Karl Fischer; pH of a 5% solution 2.5–4.5.” - “Sodium about 4.5% by ICP-OES where the sodium salt is claimed; report phosphorus where the nucleotide is in question.” - “No unrelated nucleotide above the agreed limit; state the limit and the method.” - “The destination and the form are settled before the purchase order.” ## Questions to put to the supplier - Does the certificate name the free acid or the sodium salt, and with which CAS number? - Will you send the chromatogram and the UV spectrum, not just the assay figure? - What sodium figure did ICP-OES give, and on which sample? - How was the assay basis calculated, and what water result goes with it? - If the result is disputed, will you re-test the retained sample jointly? Those five answers, taken together, are the identity file; one assay percentage is not. Start with the citicoline product page for the catalog limits. The COA page explains how a lot is released; the grades page sets out the form choice; the level-four page follows the label arithmetic; the HPLC note describes the separation. ### 01 What the COA for D-mannose actually contains URL: https://nutrition.rainwoodbio.com/products/specialty/d-mannose/coa/ Reviewed: 2026-11-19 For a D-mannose lot, the certificate should let a reviewer check four things without asking a follow-up question: what the powder is, how much sugar it contains, which optical form it is, and how much water and contamination it carries. The catalog gates are IR and HPLC identification, an HPLC assay of 98.0–101.0%, a specific rotation of +14.0° to +16.0° on the dry basis, loss on drying at ≤0.5%, the heavy-metal panel and microbiology. The rotation is the line that separates D-mannose from mannitol and from several other sugars; a percentage on its own cannot. In one lineA D-mannose certificate is complete only when the assay, the specific rotation and the loss on drying are read together, each with its method and its basis. ## Reading the certificate line by line Each parameter needs three companions: the method that produced the number, the limit it was released against, and the result itself. A line that reads only “conforms” gives the conclusion without the route to it. A result column that copies the limit is not a result. Identity sits in two rows, not one. IR and HPLC establish that the substance is mannose; the polarimeter establishes that it is the D-form and gives a rough purity check. The assay then says how much of it is there. If any one of these is missing, the certificate describes a sugar, not necessarily this sugar. Identity, assay, rotation and contaminants · D-mannose | Parameter | Method | Release limit | Appearance | Visual | White crystalline powder | Identification | IR and HPLC against a reference | Conforms | Assay | HPLC | 98.0–101.0% | Specific rotation | Polarimetry, dry basis | +14.0° to +16.0° | Loss on drying | Gravimetric | ≤0.5% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g; E. coli and Salmonella absent ## What the assay, rotation and moisture are measured against The assay needs a stated basis. The catalog calls for 98.0–101.0% by HPLC, but the certificate should say whether the calculation uses the dried substance or the powder as weighed. On the dried basis, 98.0% with 0.5% moisture becomes 97.51% as-is, and 101.0% becomes 100.50% as-is. The label claim and the weigh-up should share whichever basis the certificate uses. Rotation depends on path length, concentration, solvent and temperature, so the certificate should print all four beside the reading. The +14.0° to +16.0° window is tight enough that one decimal place is appropriate; a rounded integer discards the discrimination the test provides. Mannitol reads much higher, so a value outside the window is a reason to look further, not a rounding difference. Mannose has no useful chromophore, so the laboratory usually detects it by refractive index or evaporative light scattering, or by pulsed amperometry after anion-exchange separation. “HPLC” without a detector name is only half a method. IR supplies the comparison spectrum, and the lot should be matched against a stored reference rather than a catalogue image. ## Release gates and measured results The limit is the boundary the lot must meet; the result is the number the laboratory found. They belong in different columns. “Accepted” is a summary of that comparison, not a substitute for it. What the result column should contain | Parameter | Release limit | Result column | Assay | 98.0–101.0% on the stated basis | A measured percentage, with the basis and the detector | Specific rotation | +14.0° to +16.0° dry basis | The measured figure with solvent, concentration and temperature | Loss on drying | ≤0.5% | A measured percentage | Heavy metals | Per element | A number in mg/kg per element | Microbiology | Counts and absence | The count and the absence statement for the lot For the metal panel, each element needs its own number; a summed figure hides which metal is present. For microbiology, a count and an absence statement are both required. The same logic applies to loss on drying: the measured percentage, not just “pass”. ## Where lots differ D-Mannose is made by breaking down mannan-rich plant material or by enzymatic conversion, then purifying, crystallising, drying and milling. Each step leaves a signature: colour, moisture, particle size and, slightly, rotation. A granulated lot has a different powder behaviour but the same molecule. The rotation is worth plotting across lots. A small move inside the window can be ordinary; a move outside it points to a different sugar, a blend or a purification change. Colour is less specific. A cream tint may follow the raw material or a hot drying step, and the assay can still pass. Moisture is the clearest early warning for caking at the customer's site. Traceability means the same lot code appears on the certificate, the pouch, the drum and the retained sample. A drift across several certificates is more informative than a single value at the edge: falling assay, rising rotation or climbing moisture is a trend worth raising with the supplier. ## When to test outside An outside laboratory earns its place when the source is new, the destination is regulated, the identity is disputed, or the supplier's certificate omits the rotation. The panel should answer the open question, not reproduce the certificate. A useful set is HPLC with the chromatogram and detector recorded, IR against a reference, polarimetry with conditions, loss on drying, ICP-MS for the metals and the microbiology panel. If mannitol is the concern, ask for an HPLC method that resolves the two peaks and read the rotation beside it. If an unidentified sugar is present, anion-exchange chromatography or mass spectrometry can name it. Each screen should report its detection limit; a “not detected” entry without one says more about the method than the lot. Keep the chain of custody intact. The laboratory should receive the retained sample and report the lot code. If the result is challenged, the referee needs the retained sample, the original certificate and the specification, and a test that can separate the candidate materials rather than a second run of the same assay. ## Comparing two suppliers Ask for six items in the same format: CAS number and material name; assay result with its basis; HPLC detector and IR identity; rotation with conditions; loss on drying; heavy metals and microbiology. If two offers match on assay but not on rotation or basis, they are not the same material. Then ask for the paper trail: manufacturing site, source and route, lot number. The D-mannose product page publishes the catalog specification. The identity page sets out the tests that distinguish D-mannose from mannitol; the grades page covers the physical forms; the compliance page covers the label and the market file; the HPLC method note describes the assay; the quality page explains the release workflow. ### 02 D-Mannose grades: crystalline powder, granulate and the name twin URL: https://nutrition.rainwoodbio.com/products/specialty/d-mannose/grades/ Reviewed: 2026-11-19 D-Mannose leaves the factory in two physical forms: the catalog crystalline powder and a granulated powder available on request. The molecule does not change between them — CAS 3458-28-4, C6H12O6, HPLC assay 98.0–101.0%, rotation +14.0° to +16.0° on the dry basis — so the choice is about handling, not potency. Mannitol, despite the shared letters, is a separate material with CAS 69-65-8, and it is not a grade of D-mannose. In one lineA D-mannose grade changes the powder and its handling, not the molecule; mannitol is a different material, not a coarser grade. ## Why one sugar has more than one physical form Powders of the same sugar can behave differently in a hopper. Particle size and shape set flow, dust, segregation and the rate at which the powder dissolves, and those are the variables a grade controls. The chemistry stays fixed, which is why the assay and the rotation do not move when the particle size does. D-Mannose is hygroscopic, and that fact reaches into the grade decision. Both the crystalline and the granulated form take water from the air, so granulation does not make the powder moisture-proof. It changes the surface and the flow; the pack still has to keep the water out. “Grade” is also a word that can disguise a substitution. A quotation that offers “mannose” without a CAS number may be offering mannitol, a sugar alcohol with a similar name, a different formula and a much higher rotation. The CAS number is the quickest way to keep the two apart. ## The forms we supply, side by side D-Mannose forms and the name twin that is not a grade | Form | What changes | Assay and rotation | Typical use | Crystalline powder (catalog) | Dissolves fast; fine dust; picks up water | HPLC 98.0–101.0%; +14.0° to +16.0° dry basis | Capsules, tablets, stick packs, drink mixes | Granulated, on request | Better flow; less dust; slower dissolution | Identical assay and rotation; only the particle form changes | Blending, capsule filling, dust control | Mannitol (not a grade) | Sugar alcohol; C6H14O6; 182.17; CAS 69-65-8 | Separate assay and rotation; not D-mannose | Diluent or excipient; not a substitute The first two rows are one molecule at different particle sizes. The third is another compound that happens to share part of the name. It belongs in an identity file and on its own purchase order, not in a grade comparison. ## Flow, dust, dissolution and caking The crystalline grade dissolves rapidly and leaves a clean, sweet solution. That suits a stick pack or a drink mix, where the powder should disappear on stirring. The same fines can dust during weighing and separate in a low-shear blend, which is the reason for the granulated option. Granulation aggregates the fines into larger particles. The aggregate flows more freely, raises less dust and blends more evenly. What suffers is speed of dissolution: a granule wets and dissolves more slowly than a fine crystal, so a granule-based drink mix may need longer stirring or a different dispersion step. The taste does not change, because the molecule does not. Both forms are hygroscopic. Keep them in the closed pack, open them in a dry room and close the remainder tightly. A defined particle range for the fill line is a specification item, agreed in writing before the order; it is no longer the catalog powder. ## Capsules, sticks and the arithmetic of the label D-Mannose is not a salt, so no stoichiometric factor converts one form to another. The label declares the mass of D-mannose, and the weigh-up uses the as-is assay and the moisture to deliver it. A 500 mg declaration needs enough powder to contain 500 mg of D-mannose after those two figures are applied; the certificate should state the basis so the arithmetic can be reproduced. Capsules and tablets can take either the crystalline powder or the granulate. The granulate fills more evenly and raises less dust, but it adds a particle-size specification and slower dissolution. A stick pack or drink mix usually uses the crystalline powder for fast dissolution; moisture protection comes from the foil seal, not the particle size. When mannitol appears in a formula it is an excipient or a separate ingredient, and it must be declared as mannitol. A mannitol diluent cannot be declared as D-mannose, and a D-mannose declaration cannot be carried by a powder whose active mass is mannitol. The level-four comparison sets out the structural and label differences. ## What to write into the specification - “D-Mannose, CAS 3458-28-4, C6H12O6, molecular weight 180.16.” - “Assay 98.0–101.0% by HPLC; state the detector and the assay basis.” - “Specific rotation +14.0° to +16.0° on the dry basis, with solvent, concentration and temperature.” - “Loss on drying ≤0.5%; white crystalline powder; freely soluble in water.” - “Particle size for the granulated grade, agreed in writing; the crystalline grade carries the catalog profile.” - “Source, manufacturing route and pack confirmed before the order.” We supply the crystalline powder and the granulated form on request. The granulated form is a separate physical specification, not a packing choice, and a substitution needs a written change control. ## When the other choice is wrong For a fast-dissolving stick pack, granulation can be the wrong choice: the granule wets more slowly and may leave a visible dispersion where the crystalline powder would clear. For a low-dust capsule fill or a blend that segregates, the crystalline powder can be the wrong choice for the opposite reason. The dosage form decides, not a preference for “finer” or “coarser”. Mannitol is the right material when the formula needs a non-reducing, low-hygroscopicity diluent for a moisture-sensitive tablet, or a cooling taste in a chewable. It is the wrong material when the label names D-mannose, because the label and the balance would name different materials. A switch either way needs a new specification, label and route check. The D-mannose product page publishes the catalog specification; the COA page shows how the grade is reported; the stability page covers caking and moisture; the identity page sets out the tests that distinguish D-mannose from mannitol. D-Ribose is another monosaccharide with its own specification, and it is not a D-mannose grade either. ### 02.1 D-Mannose vs mannitol: two similar names, two materials URL: https://nutrition.rainwoodbio.com/products/specialty/d-mannose/grades/d-mannose-vs-mannitol/ Reviewed: 2026-11-19 D-Mannose and mannitol are not two grades of one material. D-Mannose is an aldohexose, CAS 3458-28-4, C6H12O6, molecular weight 180.16; mannitol is a sugar alcohol, CAS 69-65-8, C6H14O6, molecular weight 182.17. Both are white, crystalline and sweet, which is exactly why the names get confused. The formula, the specific rotation, the moisture behaviour and the label name all separate them. In one lineD-Mannose is a reducing sugar and mannitol is a sugar alcohol: the names differ by a suffix, but the formula, the rotation, the moisture behaviour and the label are all different. ## Two names that share six letters The names are easily misread on a purchase order, a label proof or a certificate. “Mannose” ends in -ose, the suffix of a sugar; “mannitol” ends in -itol, the suffix of a sugar alcohol. The ending is the first clue to the class, and the class is the first clue to the behaviour. A specification written for D-mannose does not describe mannitol, and a certificate that says “mannitol” is not evidence for a D-mannose lot. The CAS number is the shortest unambiguous identifier: 3458-28-4 for D-mannose, 69-65-8 for mannitol. A purchase order that names only “mannose” without a CAS number leaves the door open. ## The structure: an aldohexose against a sugar alcohol D-Mannose is the C2 epimer of D-glucose: the two sugars differ only in the configuration at carbon 2. It has a carbonyl group in its open-chain form and exists in solution as a mixture of ring and open forms, which is what makes it a reducing sugar. Mannitol is the reduced form of mannose: the carbonyl is gone, replaced by a second alcohol group, so the molecule is a polyol. That single reduction changes the formula by two hydrogen atoms (C6H14O6 against C6H12O6) and the molecular weight by about two units (182.17 against 180.16). It also changes the chemistry: a reducing sugar participates in Maillard browning and in oxidation reactions that a sugar alcohol does not. D-Mannose and mannitol side by side | Property | D-Mannose | Mannitol | CAS number | 3458-28-4 | 69-65-8 | Formula | C6H12O6 | C6H14O6 | Molecular weight | 180.16 | 182.17 | Class | Aldohexose; reducing sugar | Sugar alcohol; non-reducing | Specific rotation | +14.0° to +16.0° dry basis | About +23° to +24° dry basis | Moisture behaviour | Hygroscopic; cakes in humid air | Low hygroscopicity; chosen for moisture-sensitive formulas | Sweetness | Sweet | Sweet, with a cooling mouthfeel | Label name | D-Mannose | Mannitol ## Rotation: the number that separates them Specific rotation is the practical discriminator on a certificate. The D-mannose specification is +14.0° to +16.0° on the dry basis. Mannitol sits in a higher range, about +23° to +24° on the dry basis. The two windows do not overlap, so a polarimeter reading is a quick check on which material is in the bottle, provided the solvent, concentration, temperature and wavelength are stated. Rotation is also a purity signal. A D-mannose lot blended with mannitol moves upward toward the mannitol range; a blend with glucose, which rotates at about +52.5° at equilibrium in water, moves upward more steeply. A figure outside +14.0° to +16.0° does not prove which adulterant is present, but it means the lot does not match the expected identity and purity. Assay alone is weaker. An HPLC method that does not resolve mannose from mannitol can return a combined peak inside the 98.0–101.0% range while the rotation exposes the blend. The rotation should sit beside the assay on the certificate, with the detector and conditions named. ## Sweetness is not an identity test Both materials are sweet, so taste cannot tell them apart. Mannitol adds a cooling sensation and is often used in chewables and tablets for that reason; D-mannose tastes simply sweet in water. A sensory difference is not a specification, and a formulator should not use it to accept or reject a lot. The sweetness matters in the dosage form. D-Mannose contributes to the taste of a stick pack or a drink mix, and its solubility makes it easy to incorporate. Mannitol contributes bulk and a cooling mouthfeel in a tablet, where it often acts as a diluent rather than the active ingredient. The role in the formula is different even when both are described as sweet powders. ## Moisture: hygroscopic against low-hygroscopicity D-Mannose picks up water from the air and cakes. The catalog loss on drying is ≤0.5%, and that is a release gate, not a storage allowance; an opened pouch can gain moisture until the powder forms lumps and the as-is assay falls. The pack, the liner and the closing method are part of the material's practical specification. Mannitol is chosen for moisture-sensitive tablets because it picks up little water under normal storage. A humid warehouse still matters, but the difference in pickup is real. The reducing/non-reducing split matters too: D-mannose can brown with an amine source under heat, while mannitol does not carry that carbonyl. If a formula needs a non-reducing, low-hygroscopicity powder, mannitol may be the right excipient. If the label claims D-mannose, mannitol is not a substitute, because the label and the balance would name different materials. The stability page covers the caking and browning routes in more detail. ## The label and the market file The label names the material, and the two names are not interchangeable. A Supplement Facts panel or an ingredient list that says “mannitol” is declaring a sugar alcohol; one that says “D-mannose” is declaring a monosaccharide. A formula that uses mannitol as a diluent must declare it as mannitol, separately from any D-mannose content. The regulatory route follows the material, not the name family. A file built for mannitol as an excipient or additive does not cover D-mannose as an ingredient, and a D-mannose specification is not an authorisation for any market. The buyer's regulatory team confirms the route for the destination, the permitted use and the claim wording, against the current text as of this review. This page makes no health claim for either material. Any wording that links D-mannose to a body system or a condition is a claim, and claims are restricted; the brand's regulatory reviewer clears the wording for the market where the finished product will be sold. ## When to choose which Choose D-mannose when the label calls for D-mannose and the dosage form can carry a hygroscopic, reducing sugar. Capsules, tablets, stick packs and drink mixes are the usual formats, and the crystalline powder is the catalog grade. Choose the granulated form only when flow or dust control matters more than fast dissolution. Choose mannitol when the formula needs a non-reducing, low-hygroscopicity diluent, a cooling taste or a compendial excipient with its own monograph. Do not choose it as a more free-flowing substitute for D-mannose; it is a different material. A switch either way needs a new specification, label and route check. The D-mannose product page publishes the catalog specification; the grades page describes the powder forms; the identity page sets out the tests that distinguish the two materials; the compliance page sets out the market file; the HPLC method note explains how the separation works. ### 03 D-Mannose is hygroscopic and cakes; the pack and the matrix set shelf life URL: https://nutrition.rainwoodbio.com/products/specialty/d-mannose/stability/ Reviewed: 2026-11-19 The main risk to D-mannose in storage is water: the powder absorbs it, loses flow and cakes, and the as-is assay falls as the weight rises. A second risk comes from its reducing-sugar chemistry, since heat and an amine can drive browning. A sealed, dry pack protects the first; the matrix and the process decide the second. Shelf life is assigned from data on the actual pack and matrix, not from the certificate. In one lineD-Mannose picks up water, cakes and browns with amines, so the pack and the matrix decide the shelf life before the certificate does. ## The powder: water, lumps and colour The ≤0.5% loss-on-drying limit is a release gate. It is not a budget for moisture gained after the pouch is opened. Break the seal and the headspace begins to exchange with room air; the powder takes up water, the loss on drying climbs, and the as-is assay drops because the sugar is now a smaller share of a heavier powder. Lumps follow. A caked lump is evidence that the powder has already met humid air; the assay can still pass while the flow is gone. Keep the dose room dry, close the pack after every opening, and regard a torn liner or a fold-over closure as a quality event. A desiccant is useful in a humid climate, but it cannot compensate for a poor seal. Colour is the second signal. As a reducing sugar, D-mannose reacts with amines — a protein, an amino acid or an amine-bearing excipient — under heat, and the resulting pigments darken the powder. A cream or tan tint on a stored lot deserves a look even when the assay is inside the range. Store the sealed pack cool and dry, and let it reach room temperature before opening after cold transport so that condensation does not form on the powder. ## The solution: where change happens fastest D-Mannose dissolves readily in water, and the solution tastes sweet. In water, heat, pH, dissolved oxygen and microorganisms act together. A reducing sugar can isomerise or degrade at high pH, and the amine reaction that browns the powder runs faster in solution. A ready-to-drink process adds a pasteurisation or hot-fill load that the powder never sees. If a liquid is unavoidable, set the pH for the matrix, control the heat load, keep dissolved oxygen low and choose a preservative system that suits the product. Measure colour at 420 nm beside the assay, because a solution can darken before the sugar figure moves much. Validate the hold time before filling, and read the result as a property of the drink, not of the bulk powder. Bulk-powder data cannot be carried across to a beverage. The formulation, the process and the pack all change the rate; a drink needs its own data. ## What drives change during storage Factors that move D-mannose during storage | Factor | What it does | Control | Moisture | Lumps; lower as-is assay | Closed pack; dry room; desiccant if needed | Heat | Speeds browning and breakdown | Lower process heat; controlled store | Amines and proteins | Browning; both sugar and amine are used up | Keep streams apart or test the matrix | pH | Isomerisation or breakdown in solution | Set and validate matrix pH | Water activity | Mid-range water activity encourages browning | Dry the matrix; hold water activity down | Time | Gradual colour and assay drift | Set retest from data These factors interact. A warm, humid store is worse than either condition alone, and a sweet solution at the wrong pH combines water, heat and chemistry in one container. The useful question is not whether D-mannose is stable in general, but stable in which pack, at which condition and for how long. ## The pack is the barrier Supplied in a 1 kg foil pouch, the powder relies on the foil for light and moisture protection and on the seal for everything else. Folding an opened pouch over does not recreate a heat seal, and the headspace is now humid. For a long storage period, move the remainder to a smaller opaque container or use it within the stated in-use period. Bulk supply uses the 25 kg fiber drum. It relies on an inner liner for the moisture barrier, so keep the liner closed, keep the drum off a concrete floor in a humid store and record the date of opening. The lot code on the certificate, the drum and the liner should agree. For repacking, use a moisture-barrier container that also blocks light, and keep the lot identity. A desiccant helps in a humid environment but is not a substitute for a seal. Nitrogen flushing is not implied by the standard pack; if the application needs a modified atmosphere, specify it. ## A stability protocol for the ingredient A useful protocol names the pack, the storage condition, the time points and the tests. A common design holds samples at 25 °C/60% relative humidity for the long term, 30 °C/65% for an intermediate condition and 40 °C/75% for acceleration; the last one stresses the pack. Add a light-exposure arm for the failure mode a dark incubator misses, even though moisture is the main driver here. At each pull, measure assay, loss on drying, appearance, identity and microbiology. For a liquid or a stick pack, repeat the work in the matrix at the process pH and heat load. The report should list each result rather than a single pass statement, and it should identify the pack and the lot family. Request data for the pack you will actually receive, because a 1 kg pouch and a 25 kg drum differ in headspace and in how often they are opened. ## The finished formula changes the answer Capsules and tablets run at low water activity, yet the shell and the excipients can still move moisture into the fill. Measure loss on drying at release and again after storage, and inspect the fill for caking or colour. An amine-bearing excipient or a protein-based shell is the combination to watch for browning. A stick pack depends on the foil and the seal. A pinhole is a failure; inspect the strip as well as the powder. A beverage combines water, pH, heat and oxygen; the ingredient's bulk stability is the starting point, not the answer. Any overage is a formulation and label decision, and it cannot rescue a pack that lets moisture through. ## How the shelf life is set No single shelf-life number is published for D-mannose: the pack and the storage condition determine it. The specification carries an assigned retest period, backed by data on that pack. A number without a pack, a condition and a test panel is a claim, not a shelf life. At the end of the retest period, re-test the retained sample before extending use. Extension by assumption is not acceptable, and a bulk figure does not transfer to a repacked container. The D-mannose product page lists the standard packs; the COA page sets out the release tests; the MOQ page explains pack and lead time; the HPLC note explains the assay; the quality page sets out the release workflow. ### 04 D-Mannose MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/specialty/d-mannose/moq/ Reviewed: 2026-11-19 D-Mannose starts at 1 kg, packed in a foil pouch; a 25 kg fiber drum is the bulk option. Standard lead time is 1–7 days, and a granulated lot is quoted on its own schedule. A quotation is only firm when it records six things: which material and CAS number, the assay and rotation limits, the quantity and pack, the destination and Incoterm, the documents that travel with the lot, and the market where the powder will be used. In one lineOne kilogram is the working minimum: enough for a trial, a retained sample and an independent test, and small enough to ship as a single traceable pack. ## Why the minimum is 1 kg A kilogram leaves room for three jobs at once: a bench trial, a sample kept by the supplier and a sample sent to an outside laboratory. The analytical work itself needs only grams, but the samples must share a lot code if the results are to mean anything. The 1 kg pouch is the smallest unit that can be closed, labelled and traced in that way. Smaller quantities are usually split from a larger batch and repacked. The chemistry does not change, but handling increases, the original pack identity is lost and tracing the material becomes harder. At the other end, the 25 kg drum lowers the handling per kilogram while tying up inventory for longer. The minimum follows from the pack, not from a sales target. ## Packs and formats Standard D-mannose packs | Pack format | Fill | Where it fits | Notes | Foil pouch | 1 kg | Trials, samples, small batches | Moisture barrier; close after use | Lined fiber drum | 25 kg | Production runs | Liner and drum carry the lot code | Granulated powder | On request | Flow and dust control | Same assay; separate particle spec The crystalline powder is the catalog form. Granulation is a different physical specification, not a packing choice; if the fill line needs a defined particle range, say so before the quotation, because the change moves the release tests and may move the lead time. D-Mannose is hygroscopic, so the pack carries part of the quality argument. The foil pouch and the drum liner are moisture barriers; a torn liner or a fold-over closure is not a minor inconvenience. Ask for the pack that production will use, not only the one in the catalogue. ## Lead time and dispatch Standard packs are quoted at 1–7 days after confirmation. The window includes picking, documents and dispatch; shipping transit, customs clearance and the customer's own quality release sit outside it. A granulated lot, a non-standard pack or a split from bulk adds time, and the quotation should say so separately. Get the dispatch date as well as the lead time. A drum may travel on a pallet and a pouch as a parcel; the Incoterm settles who books the freight and who handles entry clearance. The paperwork should move with the lot rather than follow it. ## What a quotation needs Six details turn a quotation into something comparable: - Material and CAS. D-Mannose, CAS 3458-28-4, written out; not “mannose” alone. - Specification. Assay basis, specific rotation, loss on drying, heavy metals and microbiology. - Quantity and pack. A 1 kg pouch, a 25 kg drum or a granulated lot. - Destination and Incoterm. Country, port or address, and the trade term. - Documents. COA, specification, SDS and any statement the importer's market requires. - Intended use and market. The use (supplement, food or other) and the country of sale. A quotation that omits the market or the CAS number is incomplete. The same powder can suit one destination and fall outside the file for another, and the paperwork is part of the offer. Commercial terms are set out in the quotation, not on this page. ## The sample is a lot, not a demonstration Use the 1 kg pack to qualify the lot: run identity, assay, rotation, loss on drying and microbiology before scaling up, and keep a retained sample from the same pack. Sample, COA and quotation should all show the same lot code. Without that link, the sample demonstrates a powder but does not qualify a lot. If the project needs less than 1 kg for a bench trial, discuss it before ordering. A split from bulk is a repack with its own traceability, not the catalog pack; document it that way. A bench sample and the production drum may not come from the same lot; do not assume that they do. ## Terms to settle before the first order Commercial terms, Incoterm, pack, lead time and documents sit in the quotation. Quality terms sit alongside: specification revision, COA per lot, retained sample, retest period and change control. Settle a quality agreement before the first production order rather than after the first dispute. The quotation and the quality agreement govern returns and replacements. When a lot misses the agreed specification, the evidence is the retained sample and a joint re-test, not a photograph. Agree which laboratory is acceptable to both sides, and how the referee test is commissioned. The D-mannose product page sets out the catalog specification. Release tests are listed on the COA page; the compliance page covers the market file; the MOQ glossary entry explains the term; the logistics page covers freight and documents. ### 05 The regulatory file for D-mannose URL: https://nutrition.rainwoodbio.com/products/specialty/d-mannose/compliance/ Reviewed: 2026-11-19 D-Mannose is a monosaccharide with CAS 3458-28-4 and formula C6H12O6. The catalog specification describes the powder; it does not decide whether that powder may be used in a particular market or how the finished product may be labelled. Those questions belong to the buyer's regulatory team, who confirm the route for the destination. This page lists the framework, the file and the checks that support that review. In one lineA D-mannose specification answers what the powder is; the regulatory file answers where it may be sold and how it must be labelled, and that answer belongs to the buyer's regulatory team. ## What the file contains Four questions shape the file. Which specification revision is being bought? Which lot does the certificate cover? Which limits and label rules apply where the product will be sold? And what happens if the source, process or pack changes? The COA covers the lot, the TDS covers the specification and the SDS covers handling. None of the three settles the route on its own. Add the allergen and GMO declarations, the origin record, a residual-solvent statement and any customer-specific declaration. If a statement is missing for the lot, name the gap before the order instead of finding it at the port. Keep a versioned index; a folder of undated PDFs is not a file. ## European Union Any EU review begins with the specification, the contaminant data and the label. General food law (Regulation (EC) No 178/2002), the food-information rules (Regulation (EU) No 1169/2011) and the contaminant regulation (Regulation (EU) 2023/915) sit alongside any product-specific route. The buyer's regulatory team decides whether such a route exists for D-mannose, and on what terms, using the current consolidated text as of this review. Some markets have a product-specific entry for this form; others rely on the general food framework. The entry, its conditions and its maximum use level are not established by this page. The catalog specification is not an authorisation statement for the European Union or for any member state; it describes the powder, while the authorisation question is separate and market-specific. ## United States For a US dietary supplement, the file turns on the dietary ingredient, the Supplement Facts panel and the current good-manufacturing-practice rules in 21 CFR 111; the labelling rules in 21 CFR 101 govern the panel and claims. A conventional food use is a different route, and the supplier's basis has to be named and documented. The buyer's regulatory team confirms which route covers the finished product. This page does not state that D-mannose is authorised, notified or generally recognised for any particular use in the United States. The buyer owns that confirmation and files the supporting document with the order. ## Contaminants and limits Contaminants have to be calculated at the finished-product dose, not only checked on the drum. The table gives catalog release gates for the powder. The limit that matters for the finished product depends on the dose and on the destination text. The file should show the lot result, the method and the arithmetic that carries the ingredient result to the daily dose. Catalog contaminant limits and what the file should show | Parameter | Catalog limit in the ingredient | What the file should show | Lead (Pb) | ≤3 mg/kg | Lot result, method and the finished-product calculation | Arsenic (As) | ≤2 mg/kg | Lot result and the agreed limit for the market | Cadmium (Cd) | ≤1 mg/kg | Lot result and any category exception that applies | Mercury (Hg) | ≤0.1 mg/kg | Lot result and method ## Claims and the label The label names the material, the quantity and, where the destination requires it, the source. D-Mannose is the declared ingredient; mannitol is a different material and must be declared under its own name if it appears in the formula. A claim built on one material cannot be carried by a label that declares the other. No disease-related claim is made for this ingredient. Wording that links D-mannose to a body system, a condition or a benefit is a health claim, and health claims are restricted; the brand's regulatory reviewer clears the wording for the destination, the dose and the finished product. A certificate cannot authorise a claim, and a claim cannot alter the specification. The claim review is separate from the specification review. A specification can be correct while a label sentence is not allowed, and a permitted sentence does not make an out-of-specification lot acceptable. Keep the two records apart and version both. ## Documents the file needs - Specification, with the revision number and the date, naming D-mannose, CAS 3458-28-4 and the assay basis. - Certificate of analysis for the lot, with methods, limits and results. - Technical data sheet and safety data sheet. - Allergen, GMO, origin and residual-solvent statements. - Any customer-specific declaration, such as a statement on the source or the manufacturing route. - Change-control record for the source, process, pack or specification. A document is only useful if it refers to the same specification version and the same lot as the order. A certificate from a previous revision, or a statement without a date, is a gap in the file even when the powder is unchanged. ## Checklist before the first order - The purchase order names the material, CAS number and specification version. - The file holds the COA, TDS, SDS, allergen, GMO, origin and residual-solvent statements. - Contaminant results have been translated to the finished-product dose. - Label and claim wording has been reviewed for the destination. - No mannitol substitution has been made without a new specification and label. - Quotation, specification and certificate all cite the same revision. The D-mannose product page publishes the catalog specification; the COA page explains the lot certificate; the identity page sets out the analytical evidence against mannitol; the quality page explains the release file; the EU regulatory note gives the framework references. ### 06 How we prove a D-mannose lot is D-mannose URL: https://nutrition.rainwoodbio.com/products/specialty/d-mannose/identity/ Reviewed: 2026-11-19 A D-mannose lot passes identity only when four independent checks point the same way: the paperwork names CAS 3458-28-4 and the formula; HPLC and IR match a reference; the specific rotation sits between +14.0° and +16.0° on the dry basis; and the assay, moisture and impurity figures add up. No single number does the job. In particular, an assay percentage cannot tell D-mannose from mannitol, from glucose or from a blend. In one lineFour independent readings have to agree before a lot is D-mannose: the record, the HPLC and IR match, the rotation, and a mass balance that closes. ## The four identity layers Paperwork is not proof. A certificate can carry the right name and still describe a different powder, so each layer below has to be answered with its own measurement. A supplier who answers only the first has sent a label, not evidence. Four layers of D-mannose identity | Layer | Question | Test | What it proves | Record | Is the material named? | Name, CAS number, formula | Paperwork only | Chromatography and IR | Is the sugar mannose? | HPLC retention and IR against a reference | The molecule, not its purity | Polarimetry | Which optical form, and how clean? | Specific rotation | D-form and rough purity | Mass balance | Has the powder been cut? | Assay, moisture, impurity profile | Whether the figures agree ## HPLC and IR: the peak and the fingerprint The method should identify the column, the mobile phase, the detector and the reference standard. Mannose has no useful ultraviolet chromophore, so the detector is usually refractive index or evaporative light scattering, or pulsed amperometry after anion-exchange separation. Refractive-index detection varies with temperature and flow, and evaporative detection is non-linear; both belong in the method note. Retention alone is weak evidence. A peak at the expected time can be another sugar on a column that does not resolve the pair, so the method should show separation from glucose, fructose and mannitol. A spike of the sample with a reference standard, producing one larger peak, is a simple confirmation. Request the chromatogram, not only the percentage. IR adds the fingerprint that the specification calls for. The lot spectrum should match a stored reference, not a picture in a catalogue. IR is also a practical screen for mannitol, whose spectrum differs even though the two powders look alike. ## The rotation is a ratio Specific rotation is a normalised reading: degrees divided by decimetres and by grams per millilitre of solution. That is why +15.0° with no concentration, solvent or temperature is not a specification, and why two correct certificates can still read differently. For D-mannose the catalog range is +14.0° to +16.0° on the dry basis. Mannitol rotates at about +23° to +24° on the dry basis, so a blend of the two moves the reading upward. D-Glucose rotates at about +52.5° at equilibrium in water, so a glucose blend moves it upward more steeply. A rotation outside the range is a flag, not a diagnosis: it means the lot does not match the expected D-form and purity, and the next step is a chromatogram and a mass balance. The rotation also catches a physical blend that was formulated to land inside the assay range. The assay sees total sugar; the polarimeter sees the weighted rotation of the mixture. Read the two together. ## X-ray diffraction: the solid-state check X-ray diffraction asks whether the solid is crystalline and whether its pattern matches a reference. It can separate a crystalline sugar from an amorphous dilution and compare two sources. It is neither a purity assay nor a counter-ion measurement; a sugar has no counter-ion. Mannitol is polymorphic, so an XRD pattern can also distinguish its solid forms; that is a mannitol question, not a D-mannose one. For a disputed D-mannose lot, XRD plus rotation plus HPLC/IR is stronger than any one of them. XRD is not a routine release test here; a certificate that says only “XRD conforms”, with no pattern or reference, adds little. XRD helps most when the open question is solid form, not potency. ## What a substitution looks like Substitutions and the signals that expose them | Substitution | What it does | Signal | Test | Mannitol | Similar white powder; higher rotation; non-reducing | Rotation above +16.0°; IR mismatch | Rotation, IR, HPLC | Glucose | Common reducing sugar; rotation much higher | Rotation climbs toward +52.5°; extra peak | HPLC with a resolving column, rotation | Maltodextrin | Dilution; lowers the assay | Assay low; moisture or ash change | Mass balance, HPLC | Moisture | Caking; lowers the as-is assay | Loss on drying high | Loss on drying | Other sugar | Similar appearance and sweetness | Retention or IR mismatch | HPLC, IR Colour and sweetness are the weakest signals. White crystalline powder and a sweet taste cover several sugars, and a blend can be built to match both. The stronger signals are the rotation, the IR spectrum, the chromatogram and the mass balance. If a certificate shows appearance and assay but omits rotation, the most likely substitution remains unchecked. ## How to write the identity into the specification - “D-Mannose, CAS 3458-28-4, C6H12O6, molecular weight 180.16.” - “Assay 98.0–101.0% by HPLC; name the detector and state the basis.” - “Identification by IR and HPLC against a reference; report the chromatogram.” - “Specific rotation +14.0° to +16.0° on the dry basis, with solvent, concentration and temperature.” - “Loss on drying ≤0.5%; heavy metals and microbiology as listed.” - “No mannitol or other sugar above the stated limit; destination market confirmed before the order.” ## Five questions for the supplier - Which CAS number and material name are on the certificate: D-mannose 3458-28-4 or mannitol 69-65-8? - Can you provide the HPLC chromatogram and the IR spectrum, not only the assay percentage? - What is the specific rotation, and under which solvent, concentration and temperature was it measured? - What did this lot measure for loss on drying, and how was the assay basis worked out? - If the lot is disputed, will you test the retained sample jointly with us? Those answers, taken together, form an identity file; one assay percentage does not. The D-mannose product page publishes the catalog specification; the COA page marks where each figure sits on the certificate; the grades page describes the powder forms; the level-four comparison takes up mannitol; the HPLC method note explains how the separation works. ### 01 What the COA for D-ribose actually contains URL: https://nutrition.rainwoodbio.com/products/specialty/d-ribose/coa/ Reviewed: 2026-11-19 The certificate for a D-ribose lot reports appearance, identification by IR and HPLC, assay by HPLC at 98.0–101.0%, specific rotation at -20.0° to -22.0° on the dry basis, loss on drying at ≤0.5%, the heavy-metal panel and microbiology. Each line should show its method, the limit it was released against and the measured value in a separate column. The rotation is the line that separates the D-form from a blend or another pentose; the assay alone cannot. In one lineThe assay says how much ribose is present; the specific rotation says which ribose, and the certificate needs both on the same page. ## What a release certificate should show A certificate earns trust one row at a time. Every row should answer three things: what was measured, how it was measured and the limit it had to meet. “Conforms” on its own asks for trust without showing the basis for it. Two rows decide whether the powder is the named material. Identification and specific rotation answer the identity question; the assay answers the quantity question. A certificate that reports a percentage but no rotation has described a sugar, not necessarily D-ribose. Identity, assay, rotation and contaminants · D-ribose | Test | Method | Limit | Appearance | Visual | White crystalline powder | Identification | IR and HPLC against a reference | Conforms | Assay | HPLC | 98.0–101.0% | Specific rotation | Polarimetry, dry basis | -20.0° to -22.0° | Loss on drying | Gravimetric | ≤0.5% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g; E. coli and Salmonella absent ## Assay, rotation and the basis behind each number The assay needs a basis. Measured on the powder as received, a lot at the 0.5% moisture limit with a 98.0% dry-basis result calculates to 97.51% as-is; the same lot at 101.0% dry basis calculates to 100.50% as-is. The difference is small in absolute terms, but a label claim built on the wrong basis can miss the declared quantity, so the certificate should state “on the dried basis” or “as is” inside the assay row. The rotation is reported on the dry basis for the same reason. Specific rotation is a property of the molecule in solution, defined against the concentration, the path length, the temperature and the wavelength. A figure of -21.0° means little without those conditions; the certificate should print the solvent, the concentration and the temperature beside the result. The assay method deserves the same scrutiny. Ribose has no useful ultraviolet chromophore, so an HPLC assay normally runs on refractive-index or evaporative light-scattering detection, or on an anion-exchange column with pulsed amperometric detection. The word “HPLC” alone does not name the separation or the detector, and the certificate should name both. ## Release limit versus batch result Release limits and measured results are different things, and each needs its own column. The limit is the boundary the lot had to meet; the result is what the laboratory found. When the result column repeats the range, no one can tell whether the lot was tested at all. Reading a result against its limit | Test | Limit | What the result must show | Assay | 98.0–101.0% on the stated basis | The measured percentage, its basis and the detector | Specific rotation | -20.0° to -22.0° dry basis | The figure plus concentration, solvent and temperature | Loss on drying | ≤0.5% | The measured percentage | Heavy metals | Per element | One number per element, in mg/kg | Microbiology | Counts and absence | The plate count and the absence result “Passes specification” is a verdict, not a measurement; the figures should let the reader reach it unaided. A count and an absence statement are the evidence for microbiology. For heavy metals, one summed figure hides the element that matters; each element needs its own number. ## What moves between batches The commercial route is a fermentation or conversion step followed by crystallisation, drying and packing. Whatever the route, those final steps shift colour, assay and moisture, and they can move the rotation slightly. The drying step sets the loss on drying. A granulated lot moves the flow and the particle profile without moving the chemistry. Rotation is the most sensitive line. A small shift inside the range is normal; a figure outside it suggests another sugar, a blend or the other enantiomer. Because the range is narrow, one decimal place and the measurement conditions belong on the certificate, not a rounded integer. A run of lots tells a story that one result cannot: an assay drifting low, moisture creeping up, colour moving from white toward cream. The same lot code should appear on the certificate, the drum, the pouch and the retained sample. ## When a third-party test is warranted Buy an independent test when the source is new, when the lot is the first into a regulated market, when the form is disputed, or when the rotation sits at the edge of its range. The panel worth buying is narrower than a repeat of the certificate: HPLC on a column that resolves ribose from glucose and the other pentoses, polarimetry under stated conditions, loss on drying, ICP-MS for the heavy metals and microbiology. If 2-deoxy-D-ribose is suspected, add mass spectrometry or NMR: the deoxy compound has one oxygen fewer, C5H10O4 at 134.13, and a different fragmentation pattern. If a blend with glucose is suspected, the rotation and the chromatogram answer faster than a second assay. Make the laboratory state the detection limit behind each screen. A “not detected” entry with no limit describes the method's sensitivity, not the sample. Keep the chain of custody: the material tested should be the material retained, and the report should name the lot. ## What to compare between suppliers Compare six things: the name and CAS number, the assay figure and its basis, the rotation with its conditions, loss on drying, the contaminant and micro results, and the pack with its lot code. Two offers can quote the same assay and still describe different powders once rotation or basis differs. Traceability is the other half. The certificate should name the manufacturer, the process route and the drying and packing steps. The catalog values are published on the D-ribose product page. For the analytical case, see the identity page; for the market file, the compliance page; for the assay method, the HPLC method note; for the release process, the quality page. ### 02 D-Ribose grades: powder, granulated and what a grade changes URL: https://nutrition.rainwoodbio.com/products/specialty/d-ribose/grades/ Reviewed: 2026-11-19 D-Ribose is supplied as a crystalline powder and, on request, as a granulated powder. The molecule is the same in both — CAS 50-69-1, C5H10O5, assay 98.0–101.0% by HPLC — so a grade decision is about flow, dust, dissolution and caking, not about strength. A different sugar, including 2-deoxy-D-ribose, is a different material rather than another grade. In one lineA D-ribose grade changes the powder, not the molecule: granulation moves flow, dust and dissolution while the assay and rotation stay the same. ## Why a sugar still has grades Every sugar has a chemistry and a powder behaviour, and the specification fixes the first while the grade addresses the second. A buyer who asks for a “better grade” is usually asking for a powder that fills faster, dusts less, segregates less in a blend or dissolves at a different rate. None of those changes the assay. D-Ribose is hygroscopic. That single property makes the pack part of the grade: a powder that cakes in a pouch will do the same in a hopper, and a granulated lot cakes as readily as a crystalline one. Granulation changes the surface and the flow; it does not remove the need for a moisture barrier. The word “grade” can also hide a substitution. A quotation that offers “ribose” without a CAS number may be offering 2-deoxy-D-ribose, a deoxy sugar with its own CAS 533-67-5 and its own molecular weight. That is not a grade of D-ribose. ## The forms we supply, side by side D-Ribose forms and one nearby material | Form | What changes | Assay and rotation | Typical use | Crystalline powder (catalog) | Fast dissolution; fine dust; cakes when open | 98.0–101.0%; -20.0° to -22.0° | Capsules, tablets, stick packs, drink mixes | Granulated, on request | Freer flow; less dust; slower to dissolve | Same assay and rotation; physical change only | Blending, capsule filling, dust control | 2-Deoxy-D-ribose (not a grade) | One oxygen fewer; C5H10O4; 134.13 | Its own CAS 533-67-5 and specification | A separate purchase, not a swap The first two rows are the same molecule at different particle sizes. The third is a different compound that shares part of the name; it belongs in an identity discussion, not in a grade comparison. ## Flow, dust, dissolution and caking The crystalline powder dissolves quickly in water and gives a sweet solution. That is an advantage in a stick pack or a drink mix, where the consumer expects the powder to disappear with a stir. The same fine powder dusts during weighing and can segregate in a low-shear blend, which is why a granulated version exists. Granulation builds larger particles and reduces the fines. The result flows more freely, dusts less and blends more evenly. The trade-off is dissolution: a granule takes longer to wet and dissolve than a fine crystal, so a drink mix built on granules may need more stirring or a different dispersion step. Neither form is non-hygroscopic. Store both in the sealed pack, open them in a dry room and reseal the remainder. If the fill line needs a defined particle range, that requirement becomes a specification item and should be agreed in writing before the order, because it is no longer the catalog powder. ## Capsules, sticks and the arithmetic of a label claim Capsules and tablets take the solid powder. Granulation helps the fill line, but it does not replace a compaction trial: flow, fill weight and tablet hardness are formulation results, not certificate values. A tablet that needs a binder or a lubricant is a new formula, and the excipients have to be checked against the label. A stick pack or a drink mix takes the crystalline powder for fast dissolution. The sweetness of ribose is part of the flavour design, and it is also part of the label: ribose is a monosaccharide, so it counts as a sugar in the declaration. A “sugar-free” position needs the destination rules and the buyer's regulatory review, not a formulation assumption. Dose arithmetic is simple because there is only one form. A 500 mg label claim at the bottom of the assay range needs 500 ÷ 0.98 = 510.2 mg of powder; at the top of the range it needs 500 ÷ 1.01 = 495.0 mg. The assay range is a release range, not a licence to underfill, and the overage question belongs to the stability file. ## What the purchase specification should say - “D-Ribose, CAS 50-69-1, C5H10O5, molecular weight 150.13.” - “Assay 98.0–101.0% by HPLC, with the basis and the detector named.” - “Specific rotation -20.0° to -22.0° on the dry basis, with concentration, solvent and temperature.” - “Loss on drying ≤0.5%; heavy metals and microbiology as listed on the catalog specification.” - “Form: crystalline powder, or granulated on request; any particle requirement stated separately.” - “Pack: 1 kg foil pouch or 25 kg fiber drum; the pack is part of the moisture control.” We supply the crystalline powder as the catalog form and granulate on request. A granulated lot is quoted as its own specification, with its own particle profile and its own release tests. ## When a different grade is the wrong answer Granulation is the wrong answer when the application needs fast dissolution and the dust is already controlled. It is also the wrong answer when the buyer is trying to solve caking: the cause is moisture, and a coarser particle does not stop it. A different sugar is never the answer to a grade question. If the formula calls for 2-deoxy-D-ribose, that is a separate purchase with a separate CAS number and specification. If the formula needs a carrier or a dilution, that is a new specification with a new label, not a grade of the catalog powder. The D-ribose product hub lists the catalog specification and the standard packs. The ribose-versus-glucose comparison takes the structural question further; the COA page shows where the assay and rotation sit on the certificate; the D-mannose page is a useful contrast because a similar sugar carries a positive rotation; the identity page lists the tests that separate the forms. ### 02.1 D-Ribose vs glucose: two sugars, two specifications URL: https://nutrition.rainwoodbio.com/products/specialty/d-ribose/grades/d-ribose-vs-glucose/ Reviewed: 2026-11-19 D-Ribose and D-glucose are both sweet, reducing monosaccharides, but they are different molecules: ribose is a pentose at C5H10O5 and 150.13 g/mol, glucose a hexose at C6H12O6 and 180.16 g/mol. The practical differences are the specific rotation, the rate of Maillard browning, the sweetness and the label treatment. Neither is a substitute for the other in a specification. In one lineRibose and glucose are both reducing sugars, but a pentose and a hexose differ in rotation, reactivity and the number that belongs on the specification. ## One carbon and one ring size Both molecules are open-chain aldehydes that close to a ring in solution, and both reduce Tollens and Fehling reagents because the anomeric carbon can reopen. That shared chemistry is why they are both called reducing sugars. The difference is one carbon: ribose has five carbons and glucose six, so ribose carries one fewer CHOH group in the chain. The ring each prefers is different. Ribose closes to a five-membered furanose ring; glucose favours a six-membered pyranose ring. The ring form changes the shape the molecule presents in a matrix, and it changes the way the two sugars are perceived by taste and by the reactions that follow. The formulas carry the same information: C5H10O5 against C6H12O6, and 150.13 against 180.16 g/mol. A specification that names a percentage without the identity and the molecular weight has not said which of the two sugars is in the drum. ## The rotation points the other way Specific rotation is the quickest analytical separation between the two. D-Ribose rotates at -20.0° to -22.0° on the dry basis; D-glucose rotates at about +52.5° to +53.0° at equilibrium in water. The signs are opposite, so a polarimeter reading below zero points to ribose and a reading near +53° points to glucose. The reading is a ratio of observed rotation to concentration and path length, so the concentration, solvent and temperature belong beside the figure. A blend of the two lands between the endpoints, weighted by the fraction of each sugar. That is why the rotation is a useful screen for a blend and why a single rotation outside the range is a flag rather than a diagnosis; the chromatogram and the mass balance follow. ## Sweetness and the sugar declaration Both sugars taste sweet, and both are monosaccharides, which matters for the label: in the European Union, the food-information rules define “sugars” as all monosaccharides and disaccharides present in the food. Ribose therefore counts as a sugar in the declaration, and a product built on it cannot be called sugar-free on the strength of the ingredient name. The sweetness itself is a formulation question. Ribose is sweet, and the level at which it is used in a stick pack or a drink mix changes the flavour balance as well as the sugar figure. The buyer's team sets the recipe; the certificate does not describe the taste, and a sweetness claim is not a specification. “Sugar-free” and “no added sugar” are claim conditions, not ingredient properties. In the European Union the sugar-free condition sets a threshold of not more than 0.5 g sugars per 100 g or 100 mL; the United States has its own thresholds and its own added-sugars rules. Confirm the current text for the destination before the label is written. ## Maillard browning: the pentose reacts sooner The Maillard reaction joins the carbonyl of a reducing sugar to the amino group of an amino acid, a peptide or a protein. Both ribose and glucose can take part, but ribose is a pentose and reacts more readily than glucose in the same matrix. The visible result is a colour shift from white or cream toward yellow and brown, followed by a flavour change. Heat and intermediate water activity drive the reaction; a very dry powder reacts slowly, and a dilute solution reacts slowly, but a bar or a concentrated syrup at the wrong water activity is the difficult case. Measure colour at 420 nm as a browning index and run it beside the assay, because the sugar can be consumed before the assay moves far. This is why a ribose-containing protein bar is a harder project than a ribose stick pack. The stick keeps the sugar dry and separate from water until use; the bar brings sugar, protein, heat and water activity together and holds them for the shelf life. ## The glycemic claim needs its own file The glycemic question is where a ribose page has to be careful. Ribose is a sugar by structure and by label definition, and a marketing statement that it does not affect blood glucose, or that it is not glycemic, is a claim that needs the brand's regulatory review and the evidence behind it. This page makes no such claim and no disease-related claim. The certificate supports identity, assay and purity. It does not support a glycemic statement, an energy statement or a claim about what the ingredient does in the body. Those belong to the label review, the permitted-claims register for the destination and, where required, the clinical file the brand holds. ## The two sugars in specification terms D-Ribose and D-glucose side by side | Property | D-Ribose | D-Glucose | CAS number | 50-69-1 | 50-99-7 | Formula | C5H10O5 | C6H12O6 | Molecular weight | 150.13 | 180.16 | Class | Pentose, aldose | Hexose, aldose | Specific rotation | -20.0° to -22.0° dry basis | About +52.5° to +53.0° | Reducing sugar | Yes | Yes | Maillard in the same matrix | Reacts more readily | Reacts more slowly | Label role | A monosaccharide ingredient | A monosaccharide ingredient ## When each sugar belongs D-Ribose belongs in a formula where the pentose is the point: a specialty powder, a stick pack or a capsule with a defined label claim and a specification built around the rotation and the assay. Glucose belongs where the hexose is the point and the commodity specification already covers it. The two are not interchangeable, and a switch in either direction changes the assay reference, the rotation, the browning behaviour and the label declaration. A buyer offered “ribose” without a rotation should ask for the CAS number, the rotation and the chromatogram before the first order. Catalog values are on the D-ribose product page; the grades page covers the powder forms; the identity page sets out the four layers of evidence; the COA page explains the reporting of each figure; the D-mannose page is a useful contrast among specialty sugars; the HPLC method note describes the separation. ### 03 D-Ribose is hygroscopic and browns with amines: what sets its shelf life URL: https://nutrition.rainwoodbio.com/products/specialty/d-ribose/stability/ Reviewed: 2026-11-19 D-Ribose is hygroscopic and cakes in humid air, and as a reducing sugar it browns when it meets an amine source under heat. A sealed, dry pack protects the powder; water is where the trouble starts, because heat, pH and amines all act faster once the sugar is dissolved. Shelf life comes from stability data on that pack and that matrix, not from the certificate. In one lineMoisture makes D-ribose cake and amines make it brown; the pack and the matrix decide which of the two limits the shelf life. ## The powder: moisture, caking and colour Loss on drying is released at ≤0.5%. That number tells you what left the plant; it says nothing about how the powder behaves after the pouch is opened. Water from the room enters an open pouch, the moisture figure climbs, the as-is assay drops and lumps begin to form. Caking is a handling problem first and a chemical signal second. The pack does the protecting: a foil pouch for the 1 kg unit and a lined fiber drum for the 25 kg unit. Close the liner after every use, stand the drum off a damp floor, and write the opening date on the label. A desiccant is useful in a humid climate, but it cannot substitute for a closed seal. If the pack has been cold, let it warm to room temperature while still sealed, so condensation forms on the outside rather than on the powder. Light is not the main driver for this material, but a clear jar on a bench is still the wrong container: it exposes the powder to humidity swings and to fresh air every time it is opened. Keep the powder in its original pack or in an opaque, tightly closed container. ## The solution: water, heat and amines D-Ribose is freely soluble in water and the solution is sweet. In solution, water activity is high, and a sweet, unpreserved liquid is a growth medium for microorganisms as well as a medium for chemical change. Heat accelerates the browning; pH extremes promote degradation and isomerisation; an amine source, including a protein or an amino acid, feeds the Maillard reaction. If a liquid is unavoidable, validate the hold time and the process before filling. Control the heat load, set the pH for the matrix, keep dissolved oxygen low and use a preservative system that suits the product. Measure colour development at 420 nm as a browning index beside the assay, because a solution can lose ribose and darken before the assay moves much. A beverage needs its own study; results from the powder do not carry over, because matrix, process and pack each alter the rate. ## What drives degradation What changes D-ribose in storage | Variable | Effect | Control | Moisture | Caking; dilutes the as-is assay | Sealed pack; dry store; desiccant where needed | Heat | Accelerates browning and colour change | Cool process; controlled store | Amines and proteins | Maillard browning; sugar and amine both consumed | Separate the streams or test the matrix | pH | Extremes promote degradation and isomerisation | Validate the matrix pH | Water activity | Intermediate water activity favours browning | Dry the matrix; control water activity | Time | Slow colour and assay drift | Set the retest period from data These factors interact. A warm, humid bar with a protein source is a worse case than a warm, dry powder, and a sweetened drink left in clear glass at neutral pH combines heat and water. Stability is not a property of the powder alone; it is a property of the powder in a particular matrix, at a particular water activity, in a particular pack. ## Designing a stability study Design the study around four choices: which pack, which storage conditions, which time points and which tests. A long-term arm at 25 °C/60% relative humidity and an intermediate arm at 30 °C/65% relative humidity cover normal warehousing; an accelerated arm at 40 °C/75% relative humidity puts the pack under stress. Where the market is hot and humid, add a real-time arm at the destination climate. At every point measure assay, rotation, loss on drying, appearance and microbiology; for the powder add caking and flow; for the matrix add colour at 420 nm, sensory and a browning score where protein is present. Report the individual results rather than a pass statement, and name the pack and the lot family in the report. Ask for data on the pack that will actually ship, not a sibling pack. Headspace and opening history differ between a drum and a pouch. ## The matrix decides the rest A capsule or tablet is a dry system, but the capsule shell and its excipients can pass moisture into the fill. Measure the moisture at release and again after storage, and watch the appearance of the fill. The stick pack is only as good as its seal; one pinhole ruins it, so check the strip as well as the powder. A protein bar or a protein shake is the harder case. Ribose and a protein or an amino acid in the same matrix, with heat and intermediate water activity, is the condition the Maillard reaction needs. The result is a colour shift, a flavour change and a loss of the ingredient the label declares. Control the water activity, keep the heat load low, and measure the colour over the shelf life rather than at release alone. A ready-to-drink beverage combines water, heat, pH and, if the formula contains protein, an amine source. Bulk stability is the beginning of the answer, not the answer. An overage is decided in the label and stability files; no overage saves a pack that leaks. ## Where the retest period comes from There is no single shelf-life figure for D-ribose that holds across packs. The assigned retest period is a property of the pack and the matrix, and it is supported by data for that pack; strip the pack, the storage condition and the test panel away and the number stops being a shelf life. When the retest period ends, test the retained sample again before extending use. Extend only on new data, and never copy a bulk figure onto a repacked container. Pack sizes and formats are on the D-ribose product page; the COA page defines the release tests; ordering details are on the MOQ page; the powder forms are compared on the grades page; the quality page explains how lots are released. ### 04 D-Ribose: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/specialty/d-ribose/moq/ Reviewed: 2026-11-19 The MOQ for D-ribose is 1 kg, supplied in a foil pouch; the bulk format is a fiber drum holding 25 kg. The standard pack ships in 1–7 days, and a granulated lot is quoted separately. A usable quotation has to settle six things: the CAS number and form, the assay and rotation specification, the quantity and pack, the destination and Incoterm, the documents, and where the finished product will be sold. In one lineThe minimum is one kilogram because below that the material is a repack, not a lot with its own certificate and retained sample. ## Where the one-kilogram floor comes from One kilogram covers a bench trial, material held back for retention and a test at an outside laboratory. The assays themselves consume grams, but a retained sample stays with the supplier and a second one travels with the shipment, and both need the same lot code. This unit can be closed, labelled and traced as a lot, which is what a smaller split cannot do. Under a kilogram, the usual practice is to split a larger lot and repack it. The split adds handling, breaks the link to the original pack and weakens traceability, while the chemistry stays the same. A 25 kg drum cuts handling per kilogram, but it ties up stock and sits in storage longer. The minimum follows the pack, not a sales target. ## Packs and formats Standard D-ribose packs | Pack | Content | Where it fits | Points to note | Foil pouch | 1 kg | Trial and sample quantities; small batches | Keeps moisture out; reseal once opened | Fiber drum | 25 kg | Production runs | Lined; lot code repeated on the liner | Granulated form | Quoted on request | Flow and dust | Same assay; separate particle specification The crystalline powder is the catalog form; granulation creates a separate physical specification rather than a different way of packing the same material. If the fill line needs a defined particle range, raise it before quoting, since the change moves the release tests and may move the dispatch date. ## Lead time and dispatch Dispatch of the standard pack takes 1–7 days from confirmation. The window covers picking, the paperwork and hand-over to the carrier; transit time, customs and the buyer's own quality release sit outside it. A granulated lot, a special pack or a split from bulk takes longer, and the extra time should appear as its own line on the quotation. Ask for the date the goods leave, not just the number of days. Freight differs by pack: a drum is palletised, a pouch travels as a parcel, and the Incoterm fixes who books and clears it. The paperwork should reach the importer with the goods, not chase them. ## What a quotation needs Six headings make two offers comparable: - Material and form. D-Ribose, CAS 50-69-1, C5H10O5, crystalline powder or granulated. - Release specification. Assay and its basis, rotation with conditions, moisture, contaminant and microbiological limits. - Quantity and pack. A 1 kg foil pouch, a 25 kg fiber drum, or a granulated lot. - Destination and trade term. The country, the port or address and the Incoterm. - Paperwork. COA, specification, SDS and any statement the importer needs for its market. - Use and market. Whether the use is a supplement, a food or something else, and the country of sale. If a quotation says only “ribose”, it has not distinguished D-ribose from 2-deoxy-D-ribose or from a blend; ask for the CAS number and the rotation. Commercial terms sit on the quotation, not on this page. ## A sample has to be traceable Qualification starts with the 1 kg pack. Before scaling, test identity, assay, rotation, loss on drying and microbiology, and hold back a retained sample from that pack. The quotation, the COA and the sample should carry one lot code. Without it, the sample proves nothing about the lot behind it. A bench trial that needs less than a kilogram should be raised before the order is placed. Dividing a bulk lot produces a repacked quantity whose traceability is its own; it is no longer the catalog pack and should be labelled as a repack. The material used in a bench trial need not come from the drum that fills production. ## What to agree before ordering The quotation should carry the commercial terms, the trade term, the pack, delivery and the paperwork. Beside them sit the quality terms: specification revision, COA per lot, retained sample, retest period and change control. Have a quality agreement signed before production starts, not once a disagreement appears. The quotation and the quality agreement govern returns and replacements. If a lot misses the agreed specification, settle it on the retained sample with a joint re-test; a photograph proves nothing. Name the referee laboratory and the party who commissions the test before a dispute arises. Catalog values are on the D-ribose product page; release tests are listed on the COA page; the compliance page sets out the market file; the identity page sets out the tests that separate the material; the glossary entry on MOQ explains the term; the quality page describes lot release. ### 05 The regulatory file for D-ribose URL: https://nutrition.rainwoodbio.com/products/specialty/d-ribose/compliance/ Reviewed: 2026-11-19 D-Ribose is supplied as D-ribose, CAS 50-69-1, a monosaccharide with the formula C5H10O5. The catalog specification is where the file begins; the permitted route, the limit values and the label wording depend on the material, where it is going and the finished product. The buyer's own regulatory specialists confirm the route for the market where the product will be sold. This page lists the framework, the documents and the checks that belong in the file. In one lineA specification describes the powder; the regulatory file shows what a particular market requires before that powder can be sold. ## What the file contains A usable file answers four questions. Which specification version is being purchased? Which lot is on the certificate, and what did it measure? Which limits and label rules govern the finished product? What happens if the source, process or pack changes? The certificate speaks to the lot, the technical data sheet to the specification and the safety data sheet to handling; none of the three settles the route. Add the GMO and allergen statements, the origin record, a residual-solvent statement and any declaration the customer needs. If a statement is missing for the lot, say so before the order rather than at the port. A list of documents with version numbers beats a folder of undated files. ## European Union For the European Union, start with the specification, the contaminant data and the label. General food law (Regulation (EC) No 178/2002), the food-information rules (Regulation (EU) No 1169/2011) and the contaminant regulation (Regulation (EU) 2023/915) apply alongside any product-specific route. Whether a product-specific route applies to D-ribose, and on what conditions, is for the buyer's regulatory team to confirm against the current consolidated text as of this review. Do not read the catalog specification as a statement that the ingredient is authorised in the European Union or in any member state. The specification describes the powder; the authorisation question is separate and market-specific. ## United States In the United States the answer depends on the route. A dietary supplement centres on the dietary ingredient, the Supplement Facts panel and the current good-manufacturing-practice rules in 21 CFR 111, with the labelling rules in 21 CFR 101 governing the panel and the claims. A conventional food use raises a different question, and the basis the supplier relies on has to be named and documented. The buyer's regulatory team decides which route covers the finished product. Do not read this page as a statement that D-ribose is authorised, notified or generally recognised for a particular use in the United States. The buyer confirms the route and keeps the supporting document with the order. ## United Kingdom Great Britain and Northern Ireland follow different routes. For Great Britain, use the current GB register together with GB labelling rules. Northern Ireland sits under the EU framework. The buyer's regulatory team establishes which applies and files the evidence alongside the order. ## Contaminants and limits Contaminant limits are calculated on the finished product, not checked only on the drum. The catalog limits below are release gates for the powder; the finished-product limit depends on the dose and on the destination text. Catalog contaminant limits and what the file must demonstrate | Parameter | Catalog limit | What the file must demonstrate | Lead (Pb) | ≤3 mg/kg | Lot result, method and the finished-product calculation | Arsenic (As) | ≤2 mg/kg | Lot result and the market limit that applies | Cadmium (Cd) | ≤1 mg/kg | Lot result and any exception for the product category | Mercury (Hg) | ≤0.1 mg/kg | Lot result and method Microbiology is a release line as well: APC ≤1,000 cfu/g, yeast and mould ≤100 cfu/g, and E. coli and Salmonella absent. A finished-product specification may add its own limits, and the buyer's quality team sets them. ## Label and claims The label has to name the material and the amount in whatever form the destination requires. Claims get a separate review: the brand's reviewer decides whether the wording is permitted for this product, form and market. A certificate never approves a claim, and a claim never rewrites the specification. D-Ribose is a monosaccharide, so a “sugar-free” or a “no added sugar” position has to be checked against the current claim conditions and the full recipe, not only against the ingredient. A glycemic or energy statement is a claim in the same sense and needs the same review. This page makes no disease-related claim and no statement about what the ingredient does in the body. ## Documents in the file The file needs the current specification with a version number, the lot COA, a technical data sheet, the safety data sheet, a GMO statement, an allergen statement, the country of origin, a residual-solvent statement and any customer declaration. A packing declaration and a specification revision history make the file easier to audit. Each document should identify the product, the CAS number and the version. A COA that does not identify the lot, or a specification that does not identify its revision, is a document with a gap. ## Checklist before the first order - The specification version, the CAS number and the form are written down. - The COA, TDS, SDS and sourcing statements (allergen, GMO, origin, solvents) are in the file. - Contaminant results have been converted to the finished-product dose. - Label and claims have been checked against the destination rules. - Source, process and pack sit under change control. - Quotation, specification and certificate all cite the same version. The catalog values are on the D-ribose product page; the COA page walks through a lot certificate, and the identity page carries the analytical evidence; the quality page describes what a release file holds; the EU regulatory notes carry the framework references. ### 06 How we prove a D-ribose lot is D-ribose URL: https://nutrition.rainwoodbio.com/products/specialty/d-ribose/identity/ Reviewed: 2026-11-19 A D-ribose lot is D-ribose when four measurements agree: the document names CAS 50-69-1 and the formula, HPLC shows the ribose peak against a reference, the specific rotation falls at -20.0° to -22.0° on the dry basis, and the assay, loss on drying and impurities close the mass balance. A percentage on its own cannot tell D-ribose from glucose, from another pentose or from a blend. In one lineIdentity is the agreement of four measurements: HPLC retention, the sign and size of the rotation, the IR spectrum and a mass balance that closes. ## Four layers of evidence A certificate can carry the right name and still leave the powder unidentified. Each of the four layers below asks a different question and needs its own evidence. Answering only the first question describes a document, not a lot. Identity evidence in four layers | Level | Question | Measurement | What it establishes | Document | Is the material named? | Name, CAS number, formula | Only what the paper says | Chromatography | Is the sugar ribose? | HPLC retention against a reference | The molecule, not its purity | Polarimetry | Is it the D-form, and how pure? | Specific rotation | Chirality and gross purity | Mass balance | Has it been cut? | Assay, moisture, related sugars | Whether the figures agree ## HPLC: the peak and the detector A usable method states the column, mobile phase, detector and reference standard. Ribose has no useful ultraviolet chromophore, so the detector is normally refractive index, evaporative light scattering, or pulsed amperometric after anion-exchange separation. A refractive-index detector is sensitive to temperature and flow, and an evaporative detector gives a non-linear response; both facts belong in the method description, not in a footnote. Identity is retention plus agreement with the standard. A single peak at the expected time can be another pentose on a poorly resolving column, so the method should show that it separates ribose from glucose, xylose and arabinose. Spiking the sample with a reference standard and showing a single, larger peak is a quick confirmation. Request the chromatogram as well as the percentage. IR supplies the fingerprint that the specification calls for. The spectrum of the lot should match a stored reference spectrum, and the comparison should be made against that reference, not against a picture in a catalogue. ## The rotation is a ratio Specific rotation is a ratio: the observed rotation in degrees divided by the path length in decimetres and the concentration in grams per millilitre. That is why a figure of -21.0° without the concentration, the solvent and the temperature is not a specification, and why two certificates can disagree while both are correct. For D-ribose the catalog range is -20.0° to -22.0° on the dry basis. D-Glucose rotates in the opposite direction, at about +52.5° to +53.0° at equilibrium in water, so a blend of the two moves the reading toward zero or positive. A rotation outside the range is a flag, not a diagnosis: it says the lot is not the expected D-form at the expected purity, and the next step is a chromatogram and a mass balance. 2-Deoxy-D-ribose, CAS 533-67-5, rotates much more negative, reported around -55° to -59° at c = 1 in water. A lot with that rotation is a different material even when the appearance and the assay match. ## X-ray diffraction and the solid state X-ray diffraction asks about the solid state rather than the solution: is the powder crystalline, and does the pattern match a reference? A crystalline sugar gives sharp reflections; an amorphous or spray-dried solid gives a broad halo. The pattern can compare a new source with an approved one and can show that a lot has been converted to a different solid form. XRD does not measure purity. A minor adulterant below a few percent may not show up, and a pattern that “matches” without a reference and a detection limit is a statement rather than a result. A pattern becomes evidence only when the reference and the detection limit travel with it. The technique earns its place when the question is solid form, not identity in the narrow sense. ## What adulteration looks like Substitution targets whatever the panel does not measure. The table lists the likely forms and the measurement that exposes each one. Common D-ribose substitutions and the signals | Substitute | Effect | Signal | Test | D-Glucose | Adds mass and sweetness | Rotation moves positive; second HPLC peak | Polarimetry, HPLC | 2-Deoxy-D-ribose | One oxygen fewer; C5H10O4; 134.13 | Rotation far more negative; different mass spectrum | Polarimetry, HPLC-MS, IR | Another pentose (xylose, arabinose) | Similar chemistry and retention on some columns | Retention or peak-shape shift; rotation differs | HPLC on a resolving column, MS | Inert carrier or dilution | Lowers the ribose content | Assay low; mass balance short | Assay, loss on drying, rotation | Water | Raises loss on drying | As-is assay low; dry-basis assay normal | Loss on drying Appearance separates very little: white to cream covers a wide range and a blend can be made to match. Trust the rotation, the chromatogram and the mass balance instead. ## Identity clauses for the purchase specification - “D-Ribose, CAS 50-69-1, C5H10O5, molecular weight 150.13.” - “Assay 98.0–101.0% by HPLC, with the basis and the detector named.” - “Specific rotation -20.0° to -22.0° on the dry basis, with concentration, solvent and temperature.” - “Identification by IR and HPLC against a reference standard.” - “Loss on drying ≤0.5%; contaminant and microbiological limits as stated in the catalog.” - “No other sugar above the limit agreed with the buyer.” - “Form and pack: crystalline powder, or granulated on request; 1 kg pouch or 25 kg drum.” ## What to ask before accepting a lot - Which CAS number and which material name appear on this lot's certificate? - What rotation was measured, and at which concentration, solvent and temperature? - Will you release the chromatogram and the IR spectrum, not just the assay figure? - What loss on drying did this lot show, and what basis does the assay use? - If a result is disputed, would you agree to a joint re-test of the retained sample? Those five answers are the identity file; a percentage on its own is not. Catalog values are on the D-ribose product page; the COA page maps each figure onto the certificate; the grades page sets the forms side by side; the D-mannose page is a useful contrast because a similar sugar rotates in the opposite direction; the HPLC method note covers the chromatographic separation; the ribose-versus-glucose page covers the structural difference. ### 01 What a gamma-oryzanol certificate reports, line by line URL: https://nutrition.rainwoodbio.com/products/specialty/gamma-oryzanol/coa/ Reviewed: 2026-11-19 A gamma-oryzanol certificate is read from the identity rows outward, not from the assay down. The material is a mixture of ferulate esters, so a 95.0% figure is a total across several peaks, not the purity of one substance. Four lines decide whether the sheet is usable: the chromatographic identity, the ester profile with its standard, the melting point, and the moisture basis under the assay. In one lineA gamma-oryzanol assay is a sum over a mixture, so the certificate has to name the ester peaks it integrates, the reference standard and the moisture basis before two percentages can be compared. ## Start with the identity rows Two rows establish what the powder is before any percentage is considered. HPLC retention with a UV spectrum shows a ferulate ester mixture; the melting point shows a solid whose behaviour matches that mixture. If either row is missing, the assay is a number without a subject. The remaining lines answer narrower questions: colour, moisture, metals, microbes. A useful sheet prints the method beside each one, because “conforms” is a verdict and the reader needs the observation behind it. Identity, assay, melting point and contaminants · gamma-oryzanol | Parameter | Method | Release limit | Appearance | Visual | White to off-white, free-flowing powder | Identification | HPLC retention and UV spectrum | Conforms to the reference standard | Assay (γ-oryzanol) | HPLC with UV detection | ≥95.0% | Melting point | Capillary method or DSC | 135–140 °C | Moisture | Karl Fischer | ≤1.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent ## The assay, the standard and the moisture basis γ-Oryzanol is a family: cycloartenyl ferulate (C₄₀H₅₈O₄) is the principal member, with the 24-methylenecycloartanyl, campesteryl and β-sitosteryl esters alongside it. The HPLC result therefore depends on how the integration is drawn. The method should list the peaks it includes and the standard the total is expressed against. Two lots can both read 95.5% and differ in composition; the profile, not the total, is where that difference lives. Ask for the chromatogram. On a mixture, the trace is the primary evidence, and a percentage on its own cannot be checked. The moisture basis comes next. If the result is as-is, the water in the lot is part of the denominator; if it is on the dried basis, the water has been taken out of it. At the 1.0% moisture limit the two conventions sit about a percentage point apart: 95.0% as-is at 1.0% water becomes 95.96% dried, while 95.0% dried is 94.05% as weighed. The certificate should say which one applies. Karl Fischer and loss on drying are not interchangeable. The specification is written as moisture, so the Karl Fischer figure is the one that matches the line; a loss-on-drying result also counts other volatiles and will read differently. ## The gate and the observation A certificate carries two kinds of number. The gate is fixed before the analysis: ≥95.0%, 135–140 °C, ≤1.0%, and the element limits. The observation is what the laboratory found. A well-built sheet puts them in separate columns and never lets the gate stand in for the result. Release gate against a usable observation | Parameter | Gate | What a usable observation looks like | Assay | ≥95.0% by HPLC | A percentage, with the standard and the basis named | Melting point | 135–140 °C | The range observed on this lot | Moisture | ≤1.0% | A percentage by the named method | Heavy metals | Per element | A mg/kg figure for each element | Microbiology | Counts and absence | Counts, plus the absence statements Three details show whether the sheet was filled in or copied. For the melting point, a usable result is a measured range, not the printed 135–140 °C. For metals, each element has its own figure; a single total hides which metal drove it. For microbiology, a count and an absence statement belong together, because a low count does not say whether Salmonella was looked for. ## Where lots differ The rice variety, the harvest and the oil-removal step all steer the ester profile, so a change of source can keep the assay inside the line and still alter the powder. That is the argument for writing a profile into the specification: the assay total is stable by design, and the composition is not. The melting point drifts within its window. 136 °C and 139 °C are both acceptable; a run of lots sliding toward 135 °C deserves a question about oil or wax left in the extract, since either softens the mixture before the esters melt. Moisture tracks the dryer, and colour tracks both the bran and the dryer. White to off-white is broad enough that a duller lot is a signal to open the batch record, not a reason to reject on sight. ## When a second laboratory is worth it Four situations justify an outside test: an unfamiliar source, a first entry into a regulated market, a melting point that does not fit its range, and a customer label that names ferulic acid rather than the ester. In each case the question is narrower than “is it pure”, and the panel should be built around that question. For the first two, ask for HPLC with the full ester profile and a separate free-acid determination, melting point by capillary or DSC, saponification followed by GC of the alcohols, moisture, ICP-MS and microbiology. For a melting-point dispute, the same sample run by both laboratories settles more than a repeat of the assay. For a label question, the free-acid figure and the conversion arithmetic matter more than the total. Two habits make the result usable: require a detection limit with every “not detected”, and keep the chain of custody to the retained sample. A referee who receives the retained sample, the certificate and the agreed specification can test the disputed property directly instead of repeating an assay that is already agreed. ## Six lines for a side-by-side Set the quotations out in the same order: name, CAS and form; assay with its standard and basis; the ester profile; melting point; moisture; metals, microbiology, pack and lot code. If two offers match on the total but not on the profile, they are different materials with the same headline. Traceability is the second pass. Ask who made the lot, which rice bran it came from, and which drying and milling steps touched it. Specification values live on the gamma-oryzanol product page; the tests are set out on the identity page; the profile as a commercial choice is on the grades page; the assay separation is described in the HPLC method note; release practice is on the quality page. ### 02 The gamma-oryzanol grade is an assay, a profile and a powder URL: https://nutrition.rainwoodbio.com/products/specialty/gamma-oryzanol/grades/ Reviewed: 2026-11-19 γ-Oryzanol is supplied as one catalog grade: a ≥95.0% powder, with a granulated form available on request. What a buyer actually receives is decided by three lines that move independently — the assay, the ferulate profile and the physical form. The profile matters because the material is a mixture: two lots can both pass at 95% and still carry different shares of cycloartenyl, 24-methylenecycloartanyl, campesteryl and β-sitosteryl ferulates. In one lineThe grade is decided by three lines that move independently: the assay, the ferulate profile and the form of the powder. ## Why a mixture has grades at all A single molecule can be graded by assay alone, because the percentage describes one substance. A mixture cannot. The total can be held at 95% while the composition moves underneath it, and the composition is what the formulator actually works with. A lot rich in cycloartenyl ferulate and a lot rich in the 24-methylene analogue are both γ-oryzanol, and they are not the same powder. Rice bran is the source. The rice variety, the harvest and the refining step that separates the oil all shift the proportions, so a profile agreed against one source may not hold when the next campaign arrives. That is a property of an agricultural extract rather than a defect, and it is why a profile clause belongs in the specification. The form is the third axis. A fine powder and a granulated powder carry the same chemistry and behave differently in a blender, a capsule filler and a tablet press. ## The three axes side by side The first table is what a buyer can write into a purchase order. The second is what changes when the same powder is granulated. Three axes of a gamma-oryzanol grade | Axis | What it decides | How it is written | Assay | How much ferulate ester is present | ≥95.0% by HPLC, with the method, standard and basis | Profile | Which esters, in what proportion | Named peaks, a minimum share for the principal ester and a free-acid limit | Form | How the powder flows and dusts | Powder, or granulated on request with the particle profile agreed Catalog powder and granulated gamma-oryzanol | Attribute | Catalog powder | Granulated (on request) | Appearance | White to off-white, free-flowing powder | White to off-white, granular | Assay | ≥95.0% by HPLC | ≥95.0% by HPLC | Melting point | 135–140 °C | 135–140 °C | Moisture | ≤1.0% | ≤1.0% | Handling | Dusts; needs containment at weigh-up | Lower dust; better flow | Typical use | Capsules, tablets, small blends | High-speed blending and filling Granulation changes the particle form, not the chemistry. The assay, melting point and moisture lines stay as they are, and the particle profile is agreed separately. It is a specification change with a lead-time consequence, not a packing choice. ## Solubility and handling The material is insoluble in water and soluble in ethanol and in warm oils. In practice the powder is handled dry, dissolved in the oil phase of an emulsion, or suspended in a blend; it is not a candidate for a clear aqueous drink. A formulator who needs a transparent beverage has to look at a different ingredient, not a different grade. The powder is fine and it dusts. Static and dust are handling issues rather than quality failures, but they affect weigh-up accuracy and operator exposure, and a granulated form reduces both. In a humid room the powder can cake, which is a moisture problem and not a melting problem: the melting point is far above ambient. At 135–140 °C the melting point is well above any normal capsule or tablet process. A hot-melt extrusion can pass that temperature, and the material would then melt and resolidify as a fused mass. A process that hot needs a different specification, not a higher assay. ## Dose arithmetic and the label The label declares γ-oryzanol, and the weigh-up is in grams of powder. The two numbers meet through the assay: 100 mg of a 95.0% powder delivers 95 mg of γ-oryzanol, and a 500 mg capsule fill at the same assay carries 475 mg. The ferulate figure is a separate calculation. The principal ester is about 32% ferulic acid by mass (194.18 ÷ 602.9), so 100 mg of a 95% powder holds roughly 31 mg of ferulic acid equivalent after hydrolysis. That figure is useful in a formulation discussion and when sources are compared, but it is not the declared ingredient. A label that names ferulic acid needs the free acid. State the basis with the dose. A 95.0% result on the dried basis is not 95.0% of the powder as weighed, and a formula built on the dried figure overstates the active mass by about one percentage point at the moisture limit. The conversion is arithmetic, not a recommendation, and it belongs in the batch record rather than only in the marketing file. ## What to write into the specification - “γ-Oryzanol, CAS 11042-64-1, a mixture of ferulate esters with cycloartenyl ferulate (C₄₀H₅₈O₄) as the principal member.” - “Assay ≥95.0% by HPLC; name the integrated peaks, the reference standard and the basis.” - “Ferulate profile: the principal ester share and a free ferulic acid limit, agreed for the source.” - “Melting point 135–140 °C; moisture ≤1.0% by Karl Fischer.” - “Heavy metals Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg; microbiology as listed.” - “Source: rice bran, with the origin statement travelling with the lot.” - “Form: powder, or granulated on request with the particle profile agreed separately.” We supply the 95% powder and the granulated form. A diluted or blended material is a different specification with a different label, and it should not be ordered by changing the assay figure on the same purchase order. ## When another material is the right choice If the formula calls for free ferulic acid, the ester is the wrong input, and the oryzanol and ferulic acid comparison sets out the conversion and the label consequence. If the formula calls for the long-chain alcohols rather than a ferulate ester, policosanol is that mixture, specified on a different basis. If the formula needs a clear aqueous solution, neither material delivers it without a solubiliser. Specification values are on the product hub; the certificate layout is on the COA page; the hydrolysis risk is set out on the stability page; the profile tests are on the identity page; release practice is on the quality page. ### 02.1 Oryzanol vs ferulic acid: the ester, the free acid and the assay URL: https://nutrition.rainwoodbio.com/products/specialty/gamma-oryzanol/grades/oryzanol-vs-ferulic-acid/ Reviewed: 2026-11-19 γ-Oryzanol is a mixture of ferulate esters, and ferulic acid is the free acid those esters release on hydrolysis. They are different materials: CAS 11042-64-1 for the ester mixture against 1135-24-6 for the acid, and about 602.9 for the principal ester against 194.18 for the acid. A label written for one is not satisfied by the other, and the assay follows the same split: an oryzanol assay counts ester peaks, while a ferulic acid assay counts one free-acid peak. In one lineThe ester carries the acid: about 32% of cycloartenyl ferulate by mass is ferulic acid, and hydrolysis is what turns one into the other. ## The ester and the free acid Ferulic acid is 4-hydroxy-3-methoxycinnamic acid, C₁₀H₁₀O₄, a single molecule with a carboxylic acid group. In γ-oryzanol that carboxyl group is esterified to the 3-hydroxyl of a sterol or triterpene alcohol, so the acid is built into a larger, more lipophilic molecule. The principal member, cycloartenyl ferulate, is C₄₀H₅₈O₄ with a molecular weight of 602.9. The ester bond explains the rest: the oil solubility, the melting range, and why a ferulic acid figure on a certificate is a calculation or a hydrolysis product rather than the ingredient. γ-Oryzanol and ferulic acid side by side | Property | γ-Oryzanol | Ferulic acid | CAS number | 11042-64-1 | 1135-24-6 | Chemical identity | Mixture of sterol and triterpene alcohol ferulates | 4-Hydroxy-3-methoxycinnamic acid | Formula | C₄₀H₅₈O₄ (principal ester) | C₁₀H₁₀O₄ | Molecular weight | 602.9 (principal ester) | 194.18 | Melting point | 135–140 °C | Near 170 °C | Water solubility | Insoluble; soluble in ethanol and warm oils | Slightly soluble; dissolves in alkaline solution | Assay basis | Sum of the ferulate ester peaks | One free-acid peak ## The conversion between them Each ester carries one ferulic acid unit, so the mass ratio is fixed by the two molecular weights. For cycloartenyl ferulate it is 194.18 ÷ 602.90 = 0.322; for the campesteryl ester it is 0.337, because the alcohol is smaller. A 95% oryzanol powder therefore holds roughly 30–32% ferulic acid by mass after hydrolysis, depending on which esters dominate. Two examples show how the arithmetic runs. A 100 mg dose of a 95.0% powder delivers 95 mg of ester, which releases about 31 mg of ferulic acid on hydrolysis. Going the other way, a formula that wants 30 mg of ferulic acid needs about 93 mg of the principal ester (30 ÷ 0.322). Neither figure is a dose; both are bookkeeping that keeps the declared figure and the weighed mass from drifting apart. The factor is an estimate for the principal ester, not a constant for the mixture. A supplier should state the factor it used, and a buyer should not apply one number to a lot whose profile is different. The HPLC method note describes how the ester peaks are separated before any of this arithmetic starts. ## What each assay is counting The oryzanol assay is a sum. HPLC with UV detection near 325 nm, where the ferulate chromophore absorbs, integrates the ester peaks and reports the total against a reference standard. The number is only as good as its definition: which peaks were integrated, which standard was used, and whether the basis is as-is or dried. The ferulic acid assay is a single peak. The free acid elutes earlier than the esters, and a method that quantifies it separately gives a free-acid figure; a method that integrates everything at the detection wavelength gives a total that includes the acid. Both are legitimate, and they answer different questions. That is the usual point of confusion on a certificate. A line reading “ferulic acid 30%” on an oryzanol lot may be a calculated ester equivalent, a hydrolysed total, or a free-acid result. Ask which one it is. If the certificate does not say, the number cannot be compared with another supplier's, and it should not be copied into a specification. ## Solubility and the dosage form Both are poorly soluble in water, but not equally. The ester is insoluble in water and soluble in ethanol and warm oils; it is a lipid-phase material. The free acid is more polar: it dissolves in aqueous alcohol and, in alkaline solution, as the phenolate, which is how a formulator gets it into water at all. That difference drives the dosage form. An oil suspension, a softgel or an emulsion can carry the ester. A clear aqueous drink cannot, unless the free acid is the ingredient and the pH is set so that the carboxylate forms. ## Stability follows the form The ester is the more stable form in a dry powder and in oil, and the free acid is the more exposed form in water. The reaction that links them is hydrolysis, and it runs faster with heat, water and alkali. An alkaline beverage therefore attacks an oryzanol ingredient in two ways: it hydrolyses the ester, and it dissolves the free acid that forms, which pulls the reaction further over. The free acid has its own sensitivities. In solution it is exposed to light and oxygen, and the cinnamate double bond can isomerise. A product built on ferulic acid needs a pack and a pH that protect it; a product built on oryzanol needs a matrix that does not hydrolyse it. The stability page sets out the protocol for the ester. ## What the label has to say The label names the ingredient that is weighed. γ-Oryzanol and ferulic acid are different names for different materials, and one does not satisfy the other. A label that declares 100 mg of γ-oryzanol is not supported by a ferulic acid figure of 31 mg, and a label that declares ferulic acid is not supported by an ester that would release the same acid mass after hydrolysis. A parenthetical conversion is a labelling decision, not an arithmetic one. Whether a destination allows “γ-oryzanol (providing ferulic acid)” or a similar construction, and where the conversion may appear, is for the buyer's regulatory team. The same team confirms the route for the material; this page does not assert a market status for either form. ## When to choose which Choose γ-Oryzanol when the formula is a capsule, tablet, oil suspension, softgel or emulsion, and when the label names the ester mixture. It is the material the catalog specification describes. Choose ferulic acid when the label names the free acid and the formula can protect it: a solid dose in a sealed pack, or an alkaline aqueous system where the phenolate keeps it dissolved. It does not substitute for the ester, and the ester does not substitute for it. Changing direction means a fresh specification, a fresh label and a fresh look at the destination route. The two materials are related by one hydrolysis step, and that step is exactly what the specification and the label are there to keep straight. Specification values are on the product hub; the grades page sets this comparison inside the wider range; the identity page sets out the tests that tell the forms apart; the policosanol page covers the alcohol mixture from the same family of sources; release practice is on the quality page. ### 03 Gamma-oryzanol keeps dry; water, heat and alkali hydrolyse the ester URL: https://nutrition.rainwoodbio.com/products/specialty/gamma-oryzanol/stability/ Reviewed: 2026-11-19 γ-Oryzanol is a solid ester mixture whose melting point sits far above any warehouse temperature, so the powder itself is not the fragile part. What changes it is water: with heat or alkali present, the ester bond hydrolyses and free ferulic acid appears. The second exposure is light, which the ferulate chromophore absorbs. A sealed pack in a dry, dark store is therefore the whole storage specification, and the pack is what turns it into a shelf life. In one lineThe ester is what fails, not the powder: water, heat and alkali hydrolyse γ-oryzanol to free ferulic acid, and the pack is what keeps them out. ## The powder in the pack Moisture is specified at ≤1.0%. That number is a gate at release, not a licence to store the powder in humid air. An opened pouch takes water from the room, the as-is assay drops as the added mass dilutes it, and the powder begins to cake. A heat-sealed pouch, or a closed opaque container, is the practical requirement. Light matters because the ferulate cinnamate absorbs in the ultraviolet; exposure can isomerise the double bond, and the colour may drift before the assay does. A clear jar on a window sill is the wrong vessel, however briefly it is used. Heat is a rate factor here, not a melting risk. At 135–140 °C the material is far from melting in any normal store; heat speeds the hydrolysis that water and alkali already favour. A loading bay in summer, or a drum against a sunny wall, is the exposure to avoid. A cold pack should reach room temperature before it is opened, so condensation does not land on the powder. ## Oil, water and the alkaline case Water does not dissolve the ester. A drink made with it is a suspension, and a suspension needs a particle-size target and a suspending system or it settles; a clear beverage would need a solubiliser, which then becomes part of the stability work. Warm oils dissolve it, which is why oil suspensions, softgels and oil-phase emulsions are the natural formats. In those systems the enemies are light, oxygen and the carrier oil itself: an oil with a high peroxide value starts the oxidation that the ferulate phenol would otherwise slow down. Alkali is the specific failure. In alkaline water the ester hydrolyses, and the free acid that appears dissolves as the phenolate, removing product and pulling the reaction onward. A high-pH drink is the wrong place for γ-oryzanol; the free-acid line is the first number that will show it. ## What drives the change Drivers of change in stored gamma-oryzanol | Driver | Effect on the material | Practical control | Water | Hydrolysis to free ferulic acid; caking; lower as-is assay | Sealed pack; ≤1.0% moisture; dry store | Heat | Faster hydrolysis; faster caking | Controlled store; cool process | Alkali | Rapid ester hydrolysis | Avoid alkaline matrices; check the pH | Acid | Slower hydrolysis, still measurable | Check acidic blends; validate the mix | Light | Isomerisation of the ferulate bond; colour drift | Opaque or foil pack; dark store | Oxygen | Oxidation at the phenol; odour and colour drift | Sealed pack; low headspace A single bad condition is easier to survive than a combination. Warm, bright and humid at once is worse than three separate stresses, and an alkaline emulsion in a clear bottle stacks water, pH and light in one place. ## Designing the study Build the study around the pack and the matrix, not around the product name. A standard design uses a long-term condition of 25 °C and 60% RH, an intermediate condition of 30 °C and 65% RH, and an accelerated condition of 40 °C and 75% RH, with a light-exposure arm modelled on the usual photostability guidance. The accelerated arm tests the pack; the light arm tests the failure a dark cabinet cannot see. At each point measure assay, moisture, melting point, free ferulic acid and appearance, and add microbiology at the ends. The melting point is worth the small effort: it catches a change in the mixture that a stable assay total would hide. Report each value rather than a single verdict, and name the pack and the lot family in the report. The pack you buy is the pack to test. Headspace, surface area and how often the container is opened differ between a 1 kg pouch and a 25 kg drum, and so does the answer. ## The matrix decides A capsule or tablet keeps water activity low, but the shell and the excipients still move moisture, so check the fill at release and again after storage. In a tablet, look at the alkaline excipients: sodium bicarbonate and calcium carbonate raise the local pH at the particle surface, which is where hydrolysis begins. An oil suspension or softgel puts the ester in the phase it prefers; watch the peroxide value of the oil and validate the hold time before filling. An emulsion adds an interface: the ester sits in the oil, but an alkaline water phase can still reach it where the phases touch. A dry blend reacts slowly because there is little water. The risk arrives when the consumer mixes it: an acidic fruit powder or an alkaline mineral blend sets the pH of the drink, and the ester then meets water at a pH that suits hydrolysis. Test the prepared drink, not only the powder. ## Assigning the retest period There is no single shelf-life figure for γ-oryzanol, because the pack and the storage condition are part of the number. The retest period on the specification is the one supported by the study for that pack; outside that context a figure is only a claim. When the period is reached, re-assay the retained sample before extending it. An extension by assumption, or a bulk figure carried over to a repack, is not supported by the original data. Standard packs are listed on the product hub; release tests are on the COA page; pack and lead time are on the MOQ page; the assay separation is in the HPLC note; the release process is described on the quality page. ### 04 Gamma-oryzanol: the 1 kg pack, the drum and the quote URL: https://nutrition.rainwoodbio.com/products/specialty/gamma-oryzanol/moq/ Reviewed: 2026-11-19 Gamma-oryzanol orders begin at 1 kg, which ships as a foil pouch; the bulk option is a 25 kg fiber drum. The standard pack leaves in 1–7 days. To turn an enquiry into a quotation that can be compared, six things have to be on the table: the assay and profile, the pack and quantity, the destination and Incoterm, the documents, the intended use, and the market. In one lineA first order should arrive as a lot with its own certificate, and 1 kg is the smallest pack that supports a sample, a retained portion and a traceable code. ## Why 1 kg, and not less One kilogram is enough for a bench trial, a retained sample and an independent test, and small enough to fly without a pallet. It also carries its own lot code and certificate, so the trial material and the production material can be compared on paper. A smaller quantity is normally a repack from a larger lot: more handling, a broken pack identity and a weaker traceability chain, without changing what the powder is. The 25 kg drum is the other end. It lowers handling per kilogram and raises the inventory commitment and the storage time. Neither pack is a volume reward; the minimum follows from what can be packed, labelled and traced as one lot. ## Packs and what they hold Gamma-oryzanol packs and their use | Pack | Fill | Where it fits | What to watch | Foil pouch | 1 kg | Bench trial and pilot batches | Reseal after opening; light and moisture barrier | Fiber drum | 25 kg | Production | Liner kept closed; lot code on both | Granulated powder | On request | Dust control and flow | Particle profile and lead time change The pouch is the barrier, and its seal is the weak point. The drum's liner does the same job at bulk scale; keep it closed and keep the drum off a damp floor. Write the opening date on both. Granulation is a change to the specification, not a packing option: it changes the particle profile and may change the lead time, so it belongs in the quotation. The assay, melting point and moisture lines stay as they are. ## From confirmation to dispatch The 1–7 day window covers picking, the documents and dispatch. Transit, customs and the customer's own release sit outside it. A granulated order or a non-standard pack needs its own estimate, stated separately on the quotation. Ask for a dispatch date as well as a lead time. Pallet or parcel, the trade term fixes who books the freight and who handles entry clearance, and the documents should be on the same journey as the lot rather than following it. ## Six items for a comparable quotation What a gamma-oryzanol quotation has to state | Item | What to state | Product and profile | γ-Oryzanol, CAS 11042-64-1, 95% powder; principal ester share and free-acid limit if a profile is agreed | Specification | Assay method and basis, melting point, moisture, heavy metals and microbiology | Quantity and pack | 1 kg pouch or 25 kg drum; granulated on request | Destination and Incoterm | Country, port or address, trade term | Documents | COA, specification, SDS, origin statement and any market declaration | Use and market | Supplement, food or other use; the country of sale Without the market, a quotation cannot be checked against the regulatory file. Commercial terms are not published on this page; they are set out in the offer. ## The sample is a lot The 1 kg pouch is the qualification sample. Run the HPLC profile and the melting point first, then assay, moisture and microbiology, and keep a retained portion from the same pack. The lot code should read the same on the sample, the certificate and the quotation; if it does not, the sample proves nothing about the drum. A smaller bench quantity is a repack and should be documented as one. It is a reasonable request, but it is not the catalog pack, and it does not promise that the production lot will share its profile. ## What to settle before the purchase order Alongside the commercial terms, agree the quality terms: which specification revision applies, what the certificate must contain for each lot, how the retained sample is kept, the retest period and the route for a change of source or process. Putting those in a quality agreement before the first production order is easier than resolving them after a dispute. If a lot fails the agreed specification, the retained sample and a shared re-test are the way to resolve it, not a photograph. Decide in advance who pays for the referee laboratory and which laboratory both sides accept. Specification values are on the product hub; the release tests are listed on the COA page; market documents are on the compliance page; the term itself is defined in the MOQ glossary entry; shipping documents are covered on the logistics page. ### 05 Building the regulatory file for gamma-oryzanol URL: https://nutrition.rainwoodbio.com/products/specialty/gamma-oryzanol/compliance/ Reviewed: 2026-11-19 This page cannot tell a buyer that γ-oryzanol is cleared in a given market, and it does not try. What it can do is set out the instruments that apply, the limits the file has to demonstrate, and the documents a reviewer will ask for. The route itself — food, supplement, novel food or another category — is confirmed by the buyer's regulatory team for the destination, because it turns on the material's history and the finished product, not on the specification alone. In one lineThe certificate describes one lot; the regulatory file shows how the destination classifies the material, which limits apply and how the label must read. ## The four questions a reviewer asks Every regulatory file is an answer to four questions, and different documents answer them. What is the substance, and which version of the specification governs it? Which lot is in the shipment, and what did its certificate measure? What limits and labelling rules apply to the finished product in the destination? What happens to the file if the source, process or pack changes? The certificate answers the second question and the technical data sheet the first. Neither addresses the third. A folder of PDFs is hard to review; a file with an index, a version beside each document and a named owner is easy to review. ## European Union Three layers apply at once. General food law, Regulation (EC) No 178/2002, sets the safety obligation; labelling follows Regulation (EU) No 1169/2011; contaminant maximum levels sit in Regulation (EU) 2023/915, which replaced the earlier contaminants regulation. Each is amended from time to time, so the current consolidated text is the reference. Whether the material needs a novel-food authorisation under Regulation (EU) 2015/2283 is a separate question. It turns on the evidence of use in the Union before the cut-off date, and the buyer's team establishes that position for the destination and records it in the file. A supplier's specification does not settle it, and this page does not assert it. Great Britain and Northern Ireland do not follow one rulebook. The GB file uses the GB register and GB labelling; Northern Ireland follows the EU framework. The destination decides which file is built. ## United States For a dietary supplement the material is a dietary ingredient, and the finished product is made under the cGMP rule at 21 CFR 111. If the ingredient was not marketed in the United States before 15 October 1994, a new dietary ingredient notification under 21 CFR 190.6 may be needed; a structure/function claim carries its own notification duty under 21 CFR 101.93. The supplier's part is to state the basis it relies on and supply the document behind it. The buyer's part is to confirm that the basis reaches the finished product and the wording on the label. A certificate is evidence about a lot, not about a market. ## Contaminants The catalog limits describe the ingredient; the finished product has to meet its own limits after the dose is applied. That conversion is the step most often left out of a file. Heavy-metal limits on the ingredient and the evidence they require | Metal | Catalog limit on the ingredient | Evidence the file needs | Lead (Pb) | ≤3 mg/kg | Lot figure, method and the dose calculation | Arsenic (As) | ≤2 mg/kg | Lot figure and method | Cadmium (Cd) | ≤1 mg/kg | Lot figure, and any category exception | Mercury (Hg) | ≤0.1 mg/kg | Lot figure and method Each element needs its own number. A combined figure cannot be compared with a limit written per metal, and a “not detected” without a detection limit says more about the method than about the sample. ## Claims A name is not a claim, and a certificate is not a claim review. Any statement that ties the ingredient to a health outcome or a disease state is assessed against the destination's rules, and the reviewer confirms whether an authorised wording exists or a notification is required. Structure/function wording has its own conditions and is not a substitute for an authorised health claim. No disease-related claim is made for this material. The label should name the ingredient in the form the file covers — γ-oryzanol for the ester mixture, ferulic acid only where the free acid is what is weighed. Whether a conversion may appear in the ingredient statement is a labelling decision for the destination, not an arithmetic one for the supplier. ## The document set Documents, the reviewer's question and version control | Document | Why the reviewer asks for it | Version control | Specification | Defines what is bought | Revision and date | Certificate of analysis | Shows the lot result | Lot code and release date | Technical data sheet | Properties, solubility, handling | Matched to the specification | Safety data sheet | Hazards and first aid | Current revision | Origin statement | Rice bran and country of origin | Per lot | Allergen and GMO statements | What the source carries | Per source | Residual solvent statement | What extraction leaves behind | Per process | Stability summary | Retest period for the pack | Per pack and condition If a statement is missing for a lot, say so before the shipment rather than at the border. The gap is easier to close at the factory than at customs. ## Before the first order - Specification revision, CAS number and rice-bran origin are stated. - Certificate, technical data sheet, safety data sheet and the origin, allergen, GMO and solvent statements are present. - Each metal result has been converted to the finished-product dose. - Label wording and claim wording have been reviewed for the destination. - Source, process and pack sit under change control. - Quotation, specification and certificate carry the same version. Specification values are on the product hub; the certificate is explained on the COA page; the analytical evidence is on the identity page; the release file is described on the quality page; framework references are in the EU regulatory notes. ### 06 How we prove a gamma-oryzanol lot is the rice-bran ester URL: https://nutrition.rainwoodbio.com/products/specialty/gamma-oryzanol/identity/ Reviewed: 2026-11-19 Proving a γ-oryzanol lot means proving a mixture, not a single peak. Four checks do the work: the document names the material and its rice-bran origin, HPLC with UV detection exposes the ester profile, the melting point confirms the solid, and the alcohols released by saponification show which sterols and triterpene alcohols carried the ferulate. A blend can match the assay total without being the same powder, so the total is the last thing to trust rather than the first. In one lineIdentity is a chain of agreeing checks: the chromatogram shows the ester profile, the melting point shows the mixture, and the saponified alcohols show the source. ## Four checks, four different claims Each check answers a question the others cannot, and each has a limit. A supplier who supplies only the first has described a label, not a substance. What each identity check establishes, and what it cannot | Check | What it establishes | Method | What it cannot show | Document | Identity and origin as declared | Name, CAS 11042-64-1, rice-bran statement | Whether the powder matches the paper | Chromatography | A ferulate ester mixture, and its profile | HPLC retention, UV spectrum, peak areas | Which alcohol carries each ferulate | Melting point | The solid mixture, inside its range | Capillary method or DSC | Purity, or which ester is short | Saponified alcohols | The sterol and triterpene source | Alkali hydrolysis, then GC | The profile before hydrolysis ## The profile, and the acid-to-ester ratio The profile is the set of peak areas in the chromatogram, and it is the closest thing this material has to a fingerprint. It shifts with the rice variety, the harvest and the refining step, which is why it can be agreed as a range for a source rather than fixed for all time. A specification that names the principal ester, sets a floor for its share and caps the free acid has described the powder; one that names only 95% has described a total. The second ratio links the ester to the acid. One ferulic acid unit sits on each ester, so the acid share of the mass depends on the alcohol attached. Ferulic acid share of the four main esters | Ester | Alcohol carried | Ferulic acid share of the ester mass | Cycloartenyl ferulate | Cycloartenol | 32.2% (194.18 ÷ 602.90) | 24-Methylenecycloartanyl ferulate | 24-Methylenecycloartanol | 31.5% | Campesteryl ferulate | Campesterol | 33.7% | β-Sitosteryl ferulate | β-Sitosterol | 32.9% 194.18 ÷ 602.90 = 0.322 for the principal ester, and the figure moves only slightly across the family because the alcohols are of similar size. That number converts a ferulate result into an ester result and back. It is not the assay: a method that integrates every peak at the detection wavelength will count free ferulic acid alongside the esters, which is why the free-acid result belongs on the same page as the profile. ## Melting point, DSC and diffraction Of the three solid-state checks, the melting point is the one to run on every lot. The material is a mixture, so it melts across a window; 135–140 °C is the window, and the observed range is the result. A lot that starts to melt at 128 °C usually has something softer in it, and one that holds to 146 °C often has something higher-melting, which for this family points to free ferulic acid near 170 °C. DSC sharpens the observation. Onset, peak and the width of the transition are all visible, and a single sharp event reads differently from a broad one. Neither method measures purity; both measure how the solid behaves, which is enough to catch a substitution that the assay total would hide. X-ray diffraction is the specialist tool. It shows whether the solid is crystalline and whether the pattern matches a reference, and it can compare a new source with an old one. It does not quantify the esters or the alcohols. Read a “diffraction conforms” line as a pointer and ask for the pattern, the reference and the detection limit behind it; for routine release it is more than the specification needs. ## What adulteration looks like Substitutions in the gamma-oryzanol trade, and how each one shows | Substitution | How it presents | What gives it away | Confirmation | Maltodextrin or silica | White, free-flowing, lower ester content | Assay low; melting point low or broad | Assay, melting point, ash | Rice-bran oil or wax | A softer powder with the odour of the bran | Melting point below 135 °C | Melting point, fat content | Added free ferulic acid | A total-ferulate figure that looks strong | Free-acid line high; melt high or broad | Free-acid HPLC, melting point | Sterols without ferulate | Sterol content without the UV response | Assay low against the sterol figure | HPLC/UV, GC of the alcohols | A single synthetic ester | One peak instead of a profile | No profile ratio; a sharp melt | HPLC profile, GC of the alcohols Dilution is the commonest and the quietest: the powder stays white and free-flowing, and only the assay, the ash and the melting point register it. Added free ferulic acid is the most misleading, because it lifts a total-ferulate figure while leaving the ester content untouched. Both are caught faster by the melting point and the free-acid line than by repeating the assay. ## Identity clauses for the specification - “γ-Oryzanol, CAS 11042-64-1; mixture of ferulate esters, principal member cycloartenyl ferulate (C₄₀H₅₈O₄); rice bran as the source.” - “Assay ≥95.0% by HPLC, with the integrated peaks, the standard and the basis named.” - “Ester profile: a floor for the principal ester and a ceiling for free ferulic acid.” - “Melting point 135–140 °C, reported as the range observed on the lot.” - “Moisture ≤1.0%; heavy metals and microbiology as listed.” - “No added free ferulic acid and no carrier above the agreed limit.” - “Origin statement for the rice bran, supplied per lot.” ## Five questions that produce a file - Which ester peaks does the assay integrate, and which standard is the result calculated against? - Can you provide the chromatogram and the full profile, not just the assay figure? - What is the melting point of this lot, measured and not copied from the specification? - What is the free ferulic acid result, and how was it measured? - Can you provide the saponified alcohol profile by GC, and the origin of the rice bran? Answers to those five make a file that can be checked; a percentage on its own cannot be checked, and a profile without a melting point leaves the solid unexamined. Specification values are on the product hub; the certificate layout is on the COA page; the profile as a grade choice is on the grades page; the ester-versus-acid question is on the comparison page; the separation is described in the HPLC method note. ### 01 Reading a glucosamine hydrochloride COA, line by line URL: https://nutrition.rainwoodbio.com/products/specialty/glucosamine/coa/ Reviewed: 2026-11-19 A glucosamine hydrochloride certificate carries nine release lines: appearance, infrared and HPLC identification, assay on the dried basis, chloride, specific rotation, loss on drying, particle size, the heavy-metal panel and microbiology. The assay percentage is the number most buyers read first, yet on its own it cannot separate the hydrochloride from the sulfate, from the free base or from a sugar blend. The certificate becomes evidence when the salt lines and the drying basis travel with the percentage. In one lineChloride proves the hydrochloride, rotation proves the D-form, and the assay only counts what the column sees. ## Nine lines, three questions Each row answers one of three questions: what the material is, how much of it is there, and what else came with it. A row that states only “conforms” answers with a conclusion rather than a measurement. Identity, salt and purity lines · glucosamine hydrochloride | Parameter | Method | Release limit | Appearance | Visual | White crystalline powder | Identification | Infrared spectroscopy | Spectrum matches the reference | Identification | HPLC retention | Matches the glucosamine hydrochloride standard | Assay (dried basis) | HPLC | 98.0–102.0% | Chloride | Titration | 16.2–17.0% | Specific rotation (dried basis) | Polarimetry | +70.0° to +73.0° | Loss on drying | Gravimetric | ≤1.0% The two identification lines are not duplicates. Infrared compares the whole fingerprint of the solid with a reference, which is sensitive to the salt and to the crystal; HPLC retention compares the dissolved molecule with a standard. A lot that passes retention and fails the infrared spectrum is usually a different solid form, not a different molecule. Elemental, microbiological and physical limits | Parameter | Method | Release limit | Lead | ICP-MS | ≤3 mg/kg | Arsenic | ICP-MS | ≤2 mg/kg | Cadmium | ICP-MS | ≤1 mg/kg | Mercury | ICP-MS | ≤0.1 mg/kg | Total aerobic count | Plate count | ≤1,000 cfu/g | Yeast and mould | Plate count | ≤100 cfu/g | E. coli and Salmonella | Absence tests | Absent | Particle size | Sieve analysis | ≥95% through 40 mesh ## Dried basis, moisture and the weigh-up The assay is written on the dried basis, so the result is corrected for the water the powder holds. The correction is small for this material, because the loss-on-drying limit is only 1.0%, but small is not the same as negligible: at a 1,000 mg fill weight, one percentage point of moisture is ten milligrams of powder that is not glucosamine. The arithmetic runs both ways. A lot reading 97.5% as-is at 0.8% loss on drying is 97.5 ÷ 0.992 = 98.29% on the dried basis, inside the catalog range. The same 98.0% dried-basis result on a lot holding 0.9% water is 97.12% as-is, and that is the figure a formulator uses to size the weigh-up. Ask for the loss on drying on the same certificate as the assay, not on a separate sheet from a different lot. A result close to the 102.0% ceiling with a high moisture figure is a reason to ask which number the laboratory corrected, and a certificate that omits moisture has left the basis unreproducible. ## Chloride, rotation and the result column Chloride is the line that names the salt. The hydrochloride carries one chloride per glucosamine molecule, which is 35.45 ÷ 215.63 = 16.44% by mass. The 16.2–17.0% window brackets that theoretical figure: the lower bound is 98.5% of theory and the upper bound is 103.4%, which allows for titration and standard variation but not for a different counter-ion. A lot at 15% chloride is not a slightly low hydrochloride; it is a mixture containing free base or sulfate. Specific rotation is the stereochemical line. The D-form reads +70.0° to +73.0° on the dried basis; the angle depends on concentration, temperature, cell path and standing time, because glucosamine mutarotates in water. The method has to fix the equilibration time and state it. A rotation well below the window points to the L-form, a racemic blend or an optically active diluent. What the result column should contain, line by line | Parameter | Release limit | Result column | Assay (dried basis) | 98.0–102.0% | Measured value, method, and the moisture figure used in the correction | Chloride | 16.2–17.0% | Measured value and titration mode | Specific rotation | +70.0° to +73.0° | Observed angle, concentration and temperature | Loss on drying | ≤1.0% | Measured value | Heavy metals | Per element | A separate mg/kg figure for each element | Microbiology | Counts and absence | Count plus absence statement for the lot The release limit is the boundary; the result is the measurement. A column that repeats the specification range has copied the gate, and one summed heavy-metal figure hides the element that failed. Microbiology is evidenced by a count and an absence statement, particle size by the measured percentage through the 40 mesh sieve. ## What moves between lots Source and crystallisation move the colour and the trace profile. Shellfish-derived material and fermentation-derived material can both meet the same specification, but they arrive with different organic residues, different colour and different documentation. A supplier change of source is a specification change even when the assay, chloride and rotation all remain inside the window. Drying moves the loss on drying, which moves the as-is assay without moving the dried-basis figure. Milling and sieving move the 40 mesh result without touching the chemistry. Chloride and assay should move together: if the assay rises while chloride falls, the lot is drifting toward the free base, and a single out-of-window line is easier to explain than a pair that has started to separate. Colour is the least quantitative line and the most revealing. White crystalline powder covers a range, and a lot that is noticeably yellow or tan can indicate moisture pickup, heat exposure or browning while every chemical line still passes. Ask for the batch record before rejecting on colour. ## When an outside test earns its place An outside test is worth ordering when the source is new, when a market is being entered for the first time, when the salt is disputed, or when a label claim is not proved by the supplier's certificate. The useful panel is HPLC assay with the standard, chloride by titration, specific rotation, infrared identity, loss on drying, ICP-MS and the microbiological set. When the question is the salt rather than the purity, add sodium and potassium by ICP-OES and sulfate by ion chromatography: the hydrochloride shows neither above the reporting limit, and a sulfate complex shows the counter-ion at percent levels. When the question is a sugar dilution, the chromatogram usually answers it, because the sugar appears as a separate peak the assay integration ignored. ## Six lines to compare between suppliers Six columns make two quotations comparable: the salt and its CAS number; the assay with its basis; chloride; rotation with its conditions; moisture; and the contaminant panel beside the pack and lot code. If two quotations match on assay but not on chloride or rotation, they describe different salts; a quotation without the source leaves the allergen statement open. The catalog specification sits on the glucosamine product page. The identity page sets out the tests that separate the hydrochloride from the sulfate, the quality page describes release, and the HPLC method note covers the chromatography. ### 02 Glucosamine hydrochloride, sulfate or NAG: choosing the form URL: https://nutrition.rainwoodbio.com/products/specialty/glucosamine/grades/ Reviewed: 2026-11-19 Glucosamine is sold in three commercial forms: the hydrochloride, a sulfate complex, and N-acetyl glucosamine. This catalog grade is D-glucosamine hydrochloride, CAS 66-84-2, the salt that carries the most glucosamine per gram and no sodium or potassium. The sulfate is usually a complex with potassium chloride or sodium chloride, so part of the weighed mass is counter-ion, and N-acetyl glucosamine is a different molecule with its own name. The form decides the mass behind each gram, the assay basis and the ingredient name. In one lineHydrochloride, sulfate and NAG are three different label ingredients, and a gram of each does not carry the same amount of glucosamine. ## Why one amino sugar has three commercial forms Glucosamine is an amino sugar: a six-carbon sugar with an amino group in place of a hydroxyl at position 2. The free base is a reducing sugar and a base at the same time, which makes it awkward to handle and to keep. The salts are easier to crystallise, easier to dry and more stable as solids, and each salt fixes a different counter-ion into the powder. That is why the commercial question is not “glucosamine” but which salt, at what mass, under which name. Source is a separate decision from form. The material can come from shrimp or crab shell, or from fermentation, and the source decides the allergen statement and part of the documentation. It does not change the salt chemistry: a hydrochloride lot from shellfish and a hydrochloride lot from fermentation carry the same CAS number and the same 16.44% theoretical chloride. The specification needs both facts, form and source, because a quote that names only one of them has not described the material. ## The three forms side by side Glucosamine hydrochloride, glucosamine sulfate and N-acetyl glucosamine | Property | Hydrochloride (catalog) | Sulfate | N-acetyl glucosamine | CAS number | 66-84-2 | 29031-19-4 | 7512-17-6 | Formula | C6H14ClNO5 | C12H28N2O14S | C8H15NO6 | Molecular weight | 215.63 | 456.42 | 221.21 | Glucosamine base | 83.1% by mass | 78.5% as the 2:1 salt; about 59% as the KCl complex | Not a glucosamine salt | Counter-ion | Chloride | Sulfate, with potassium or sodium chloride in the complex | None; acetyl group on the nitrogen | Assay basis | 98.0–102.0% dried basis, HPLC | Glucosamine or sulfate, depending on the method | Assayed as NAG, not as glucosamine | Label name | Glucosamine hydrochloride | Glucosamine sulfate, with the counter-ion named | N-Acetyl glucosamine The sulfate row needs a second look, because the salt and the commercial complex are not the same object. The 2:1 sulfate has a formula mass of 456.42 and is 78.5% glucosamine base. Suppliers usually stabilise it with two potassium chloride or two sodium chloride units, giving a complex of about 605 or 573 g/mol in which glucosamine base is only about 59% or 62% of the powder. A specification that says “glucosamine sulfate 98%” without the basis is comparable with neither figure. ## Solubility, crystal and handling The hydrochloride is a white crystalline powder, freely soluble in water, and the solution is acidic. That acidity is useful: it holds the amino sugar in a protonated form that is more stable in solution than the free base, and it suits powder sticks and drink mixes where the powder has to dissolve quickly. The crystal is also hygroscopic, so the 1.0% loss-on-drying limit is a working limit and not a formality; a pouch left open will pick up water and cake. The sulfate complexes are also water-soluble, but a larger share of the weighed mass is counter-ion, and the potassium or sodium travels into the finished product. That is a formulation fact, not a defect: a drink mix built on the KCl complex adds potassium, and a tablet built on the NaCl complex adds sodium. Flow and particle size depend on whether the complex is a granule or a milled powder, so a 40 mesh hydrochloride specification cannot be copied across. N-acetyl glucosamine is a white to off-white powder, soluble in water, with a slightly acidic solution. Because the nitrogen is acetylated, it is not a glucosamine salt and does not carry the free amino group behind some of the browning chemistry. It is a separate ingredient with its own assay and label name, not a protected or diluted glucosamine. ## Dose arithmetic and the label The conversion between forms is fixed by the formula. The hydrochloride is 179.17 ÷ 215.63 = 83.1% glucosamine base, so 1,500 mg of the salt supplies 1,246 mg of base. To declare the same 1,500 mg of base from the hydrochloride, a formulator weighs 1,500 ÷ 0.831 = 1,805 mg. Neither number is a dose recommendation; they are the arithmetic that reconciles the label with the weigh-up. The sulfate complex moves the arithmetic further. At about 59.2% base, 1,500 mg of the KCl complex supplies 888 mg of glucosamine base; delivering 1,500 mg of base would take 2,535 mg of the complex. That is why a label reading “1,500 mg glucosamine sulfate” and one reading “1,500 mg glucosamine hydrochloride” do not describe the same intake, however similar the front of the pack looks. NAG is not converted at all. A label declaring N-acetyl glucosamine is declaring that molecule, and expressing it as “glucosamine” would rename the ingredient. The three forms therefore need three label lines, three specifications and three document sets; a switch is a new product file, not a substitution at the balance. ## What to write into the specification - “D-Glucosamine hydrochloride, CAS 66-84-2, C6H14ClNO5.” - “Assay 98.0–102.0% on the dried basis by HPLC; loss on drying ≤1.0%.” - “Chloride 16.2–17.0%; specific rotation +70.0° to +73.0° on the dried basis.” - “Identification by infrared and HPLC; heavy metals and microbiology as listed.” - “Particle size ≥95% through 40 mesh; source and allergen statement named.” - “Destination market and permitted form confirmed before the order.” ## When the hydrochloride is the wrong choice The hydrochloride is the practical default when the label can name it: it delivers the most base per gram, it carries no sodium or potassium, and it dissolves freely in water. It is the wrong choice when the brand has built its label and its market file around the sulfate, or when a customer specification names the KCl complex. Substituting the hydrochloride into a sulfate label changes the declared ingredient and the mass per serving, and it is not a purchasing decision. The reverse substitution is equally bad. A hydrochloride label filled with sulfate complex delivers less glucosamine than declared, and a NAG label filled with glucosamine hydrochloride declares a molecule that is not in the pack. Change the form only through a written change control, with a new specification and a new label check. The catalog specification is on the glucosamine product page. The hydrochloride-versus-sulfate comparison takes the assay basis and label questions further; the chondroitin sulfate page shows the companion ingredient; the compliance page covers the market route. ### 02.1 Glucosamine HCl vs sulfate: assay, sodium and the label URL: https://nutrition.rainwoodbio.com/products/specialty/glucosamine/grades/glucosamine-hcl-vs-sulfate/ Reviewed: 2026-11-19 Glucosamine hydrochloride and glucosamine sulfate differ by the counter-ion, and the difference is larger than the name suggests. The hydrochloride is 83.1% glucosamine base with 16.44% chloride; the 2:1 sulfate is 78.5% base, and the potassium chloride complex that suppliers usually ship is only about 59% base. Switching between them changes the molecular weight, the assay basis, the mineral load and the ingredient name on the label. In one lineThe counter-ion sets the molecular weight, the assay basis and the label; a glucosamine figure means nothing until the salt is named. ## Two salts of one amino sugar Glucosamine is the free base, C6H13NO5, with a formula mass of 179.17. The hydrochloride adds one hydrochloric acid unit, giving C6H14ClNO5 and 215.63. The sulfate is a 2:1 salt, two glucosamine molecules to one sulfate, with a formula mass of 456.42. The commercial sulfate is normally stabilised with two potassium chloride or two sodium chloride units, which raises the formula mass to about 605 or 573 and lowers the glucosamine share of every gram. Glucosamine hydrochloride against the sulfate forms | Form | Formula | Formula mass | Glucosamine base | Counter-ion | Hydrochloride | C6H14ClNO5 | 215.63 | 83.1% | Chloride, 16.44% | Sulfate, 2:1 | C12H28N2O14S | 456.42 | 78.5% | Sulfate, 21.05% | Sulfate with 2 KCl | C12H28N2O14S·2KCl | 605.51 | 59.2% | Sulfate and potassium | Sulfate with 2 NaCl | C12H28N2O14S·2NaCl | 573.30 | 62.5% | Sulfate and sodium The formulas are not interchangeable units. A purchase order that says “glucosamine sulfate” without the counter-ion has not fixed the formula mass, and the mass per serving can move by a third. ## The comparison that decides the purchase Five lines separate the forms in practice: the CAS number, 66-84-2 for the hydrochloride and 29031-19-4 for the sulfate; the assay basis; the salt test; the solution; and the label name. The hydrochloride is read against a glucosamine hydrochloride standard on the dried basis, and its salt is proved by chloride titration. A sulfate lot may be assayed as glucosamine after hydrolysis or as sulfate by precipitation, and it is proved by sulfate plus potassium or sodium. The hydrochloride gives an acidic solution with no mineral load; the complex brings potassium or sodium into the formula. Solubility is often cited as the reason to choose the sulfate, but both forms dissolve in water. What differs is the mass that dissolves: a gram of the KCl complex carries about 592 mg of glucosamine base, while a gram of the hydrochloride carries about 831 mg. Two soluble powders at the same weight can carry very different doses. ## What the assay number is measured against On the hydrochloride, the assay is 98.0–102.0% on the dried basis by HPLC, and the chloride line at 16.2–17.0% is a second, independent measure of the salt. The two are read together: a hydrochloride certificate that reports 99% assay and 15% chloride has described a powder that is not the hydrochloride, whatever the assay says. On the sulfate, the assay number has to name its basis before it means anything. A result expressed on the sulfate complex is not the same as a result expressed on glucosamine content after hydrolysis, and a specification that says “glucosamine sulfate 98%” may mean either. The certificate should also report sulfate and the counter-ion, because those lines are what separate the 2:1 salt from the KCl and NaCl complexes. When a supplier quotes only a glucosamine figure, ask whether the sample was hydrolysed and which standard was used. ## Chloride, sodium and potassium on the label The counter-ion is a nutritional fact as well as a chemical one. The hydrochloride brings no sodium or potassium at all; 1,500 mg of the 2NaCl complex carries about 120 mg of sodium, and 1,500 mg of the 2KCl complex about 194 mg of potassium. For a low-sodium formulation, that is the deciding line. Counter-ion load at a 1,500 mg weigh-in | Form | Counter-ion share | Mineral per 1,500 mg | Hydrochloride | 16.44% chloride | No sodium or potassium | Sulfate with 2 KCl | 12.91% potassium | About 194 mg potassium | Sulfate with 2 NaCl | 8.02% sodium | About 120 mg sodium In the United States, sodium and potassium are declared in the Supplement Facts panel when they are present at a declarable level, so the form changes the panel. In the EU, they belong in the nutrition declaration where one is given, and they count toward the label's mineral figures. Neither form is “cleaner” in the abstract; the label and the diet decide. ## The dose arithmetic between the forms A label declaring 1,500 mg of glucosamine hydrochloride is declaring 1,246 mg of glucosamine base. The same 1,500 mg declared as the KCl sulfate complex is 888 mg of base, and delivering 1,500 mg of base would take about 2,535 mg of the complex. The conversion factor for the hydrochloride is 0.831; for the KCl complex it is about 0.592. Neither figure is a dose recommendation; both reconcile a label with a weigh-up. The assay basis adds a second correction. A 98.0% result on the dried basis at 0.9% moisture is 97.12% as-is, so a 1,500 mg weigh-in supplies about 1,457 mg of the salt as received. Applying the base factor to the dried-basis figure without the moisture correction overstates the base by about 13 mg at this dose. ## What each form puts on the label The EU ingredient list names the form, and the crustacean allergen is emphasised when the source is shrimp or crab shell. “Glucosamine” alone does not identify the salt, and a label written for the hydrochloride does not cover a sulfate complex. US labelling puts the dietary ingredient in the Supplement Facts panel, so “glucosamine hydrochloride” and “glucosamine sulfate” are declared separately, and the complex should carry its counter-ion. The label also fixes the market file: artwork built around one form cannot switch to the other without new artwork, a new specification and a route check. The compliance page sets out the framework; the buyer's regulatory team signs off the label name. ## When to choose each Choose the hydrochloride when the label can name it and the formula wants the most glucosamine base per gram with no sodium or potassium. It dissolves freely, gives an acidic solution that suits sticks and drink mixes, and carries a chloride line that proves the salt on the certificate. This is the catalog grade. Choose a sulfate complex when the label, the customer specification or the market file calls for it, and write the counter-ion into the specification. It is not a drop-in: the mass, the mineral load and the label all change. Moving in either direction calls for written change control and a fresh label check. The glucosamine product page holds the catalog specification, the grades page sets this comparison in the wider range, the COA page shows where chloride and rotation appear, and the identity page covers the separating tests. ### 03 Glucosamine HCl stability: moisture, browning and the pack URL: https://nutrition.rainwoodbio.com/products/specialty/glucosamine/stability/ Reviewed: 2026-11-19 Glucosamine hydrochloride takes up water and it browns. The two failures are linked: moisture mobilises the browning reaction, heat speeds it up, and a reducing sugar in the same blend supplies the other half of it. The pack and the recipe are the two controls, and the shelf life is the outcome of both. An aqueous solution is more stable than the free base because the hydrochloride keeps it acidic, but it still loses colour and assay when the pH is raised toward neutral or when a hot-fill step is added. In one lineMoisture and heat are the two levers, and the third is the recipe: glucosamine browns when a reducing sugar shares the powder. ## The powder: water, caking and colour The catalog limit is loss on drying ≤1.0%, a tight gate for a crystalline salt and a deliberate one. The crystal is hygroscopic, and water that arrives after release does not stay on the surface: it raises the loss on drying, lowers the as-is assay, and lets the powder cake into lumps that no longer flow through a capsule machine. Once a pouch is opened and folded shut, it no longer seals like the heat-sealed original, and a drum liner left open in a humid store will pass water through the headspace. Colour is the visible half of the same problem. White crystalline powder should stay white; a yellow or tan shift means the powder has been warm, wet or both, and the chemical lines can still pass while the colour has moved. Read a colour change as an early signal rather than a cosmetic issue, and check the loss on drying of the same sample before deciding whether the pack or the store is at fault. Keep the sealed pack in a dry store, let it reach room temperature before opening after cold transport, so condensation does not settle on the powder, and record the date of opening. If a desiccant is specified, the quotation says so; a desiccant does not replace a sound seal. ## The solution: acidic, and only as stable as its pH Glucosamine hydrochloride dissolves freely in water and the solution is acidic. That acidity is part of the stabilisation: the amino group is protonated, and the molecule is less prone to the browning and colour development that the free base shows as the pH rises. A formulator who neutralises the solution to make it taste less sharp removes that protection, and the rate of colour formation increases. If a neutral pH is required for the matrix, the stability work has to be repeated at that pH. Heat is the second variable in solution. Pasteurisation, hot fill and long hold times all add thermal load, and a solution that is acceptable at ambient can fail after a hot fill. Light is not the primary driver for this molecule, but a clear bottle on a bench is still a poor hold container. Dissolved oxygen and trace iron or copper are worth controlling in a liquid, because both are associated with colour development in amino-sugar systems. Mutarotation is not a stability failure, but it is a measurement trap: the specific rotation of a freshly prepared solution drifts as the anomers equilibrate. A rotation measured before equilibration can sit outside the +70.0° to +73.0° window on a perfectly good lot, which is why the method fixes a standing time. ## What drives degradation Factors that move glucosamine hydrochloride during storage | Factor | Effect on the powder or solution | Control | Moisture | Higher loss on drying, lower as-is assay, caking | Sealed foil pouch; closed liner; dry store | Heat | Faster browning and faster moisture damage | Controlled store; cool process; short holds | Reducing sugars and aldehydes | Maillard browning, assay loss, colour shift | Choose excipients and flavours with this reaction in mind | pH | Colour formation accelerates as pH rises | Keep the matrix acidic, or validate the neutral pH | Metal ions | Colour development in solution | Avoid iron and copper contact | Oxygen | Colour in liquids and wet blends | Low headspace; deaerated water; sealed pack These factors interact. A warm, humid warehouse is worse than either condition alone, and a wet granulation with a glucose syrup combines water, heat and a reducing sugar in one step. The useful question is not whether glucosamine is stable, but stable in which pack, which matrix and which process. ## A stability protocol for the ingredient Storage conditions for a glucosamine hydrochloride stability file | Condition | What it covers | Duration | 25 °C/60% RH | Long-term, warehouse | Full retest period | 30 °C/65% RH | Intermediate, warm store | Intermediate points | 40 °C/75% RH | Accelerated; stresses the pack | Short series | High humidity, open pack | Moisture pickup and seal qualification | Defined pickup series Test assay on the dried basis, loss on drying, appearance and colour, chloride, specific rotation and microbiology at each point. Chloride and rotation should not move in a stored lot; if they do, the sample has been contaminated or the method has drifted, and either finding matters. For a stick pack or a drink mix, repeat the work in the matrix at the process pH and heat load, and measure colour instrumentally rather than by eye. ## What the finished formula adds A capsule or tablet keeps water activity low, but the shell and the excipients can still hand moisture across, and a hygroscopic fill can pick up water during coating or in storage. Check the loss on drying at release and again after storage, and look at the fill for colour and caking. In a stick pack the foil and the seal carry the risk: one pinhole fails the pack even when the powder was perfect, so inspect the strip as well as the contents. Blends are where the browning chemistry becomes practical. Glucose syrup, honey, fruit powders, lactose and aldehyde flavours can all react with the amino group, and the reaction needs only a little water and heat to show. An effervescent system adds a second problem, because the bicarbonate raises the pH as the tablet dissolves. Dry blending, dry granulation and a low-moisture excipient set reduce the risk; a wet granulation with a reducing sugar does the opposite. An overage is a formulation decision and does not repair a pack that lets water in. ## How the shelf life is set There is no single shelf-life figure for glucosamine hydrochloride, because the pack and the storage condition decide it. The retest period that appears on the specification is backed by the stability file for that pack, and a number that arrives without a named pack, a storage condition and a test list is a claim, not a shelf life. Once the retest period is reached, re-assay the retained sample before extending use, and do not transfer a bulk figure to a repacked pouch. The product hub lists the standard packs; packs and lead time are on the MOQ page, release tests on the COA page, the quality page describes the release workflow. ### 04 Glucosamine HCl: MOQ, packs and the information a quote needs URL: https://nutrition.rainwoodbio.com/products/specialty/glucosamine/moq/ Reviewed: 2026-11-19 Glucosamine hydrochloride is stocked in a 1 kg foil pouch, with a 25 kg fiber drum as the bulk pack. The minimum order is 1 kg, and the standard pack leaves in 1–7 days. A quotation becomes comparable only when it carries six facts: which salt and which source, the specification and its assay basis, the quantity and pack, the destination with its trade term, the document set, and the market where the finished product will be sold. In one lineA kilogram is the smallest unit that can be sampled, retained and traced as a lot; the drum is the same material at a different scale. ## Why the order starts at a kilogram The minimum is a sampling decision. A qualification needs enough powder for a bench trial, for a retained sample and for a portion to send to a second laboratory, and a kilogram covers all three while still travelling as a parcel. For this product the point is sharper than usual: the identity case rests on chloride, specific rotation and the assay basis, and a reviewer may want to repeat those tests rather than accept one certificate. Anything smaller is normally split from a larger lot. The powder does not change, but its provenance does: a split adds a handling step, a repack date and a weaker tie to the original lot code. A 25 kg drum lowers the handling cost per kilogram, yet it also locks up stock of a hygroscopic powder for longer. The minimum reflects the pack, not a sales target. ## Packs, formats and what changes Glucosamine hydrochloride pack formats | Format | Contents | Suited to | What to note | Foil pouch | 1 kg | Trial, sample, small run | Moisture barrier; close tightly after use | Fiber drum | 25 kg | Production | Liner carries the barrier; lot code on drum and liner | Granulated grade | On request | Flow on a capsule or tablet line | New particle-size line, and possibly a longer lead time The catalog material is a 40 mesh powder, at least 95% through the sieve. Granulation is a different specification rather than a packing preference, and a blend or dilution changes the assay per gram and the label as well. If the dosing line needs a coarser or freer-flowing powder, that belongs in the enquiry, because the change reaches the specification before it reaches the invoice. ## From confirmation to dispatch The 1–7 day window begins when the order is confirmed and ends when the pack leaves. Shipping transit, customs clearance and the customer's own quality release sit outside it. A granulated grade or a special pack is quoted with its own timing rather than squeezed into the standard figure. Two dates are worth asking for: the dispatch date, which the supplier controls, and the expected arrival, which depends on the route. The trade term settles freight booking and customs entry, and the documents belong in the same shipment as the lot rather than in a later email. ## Six facts for a comparable quotation - The salt and the source. D-Glucosamine hydrochloride, CAS 66-84-2, made from shellfish or by fermentation. - The specification. Assay with its basis, chloride, rotation, moisture, particle size, the elemental panel and microbiology. - The quantity and pack. A 1 kg pouch, a 25 kg drum, or a granulated grade. - The destination and trade term. Country, delivery point and Incoterm. - The documents. COA, specification, SDS, source statement and allergen declaration. - The market and the use. Food, supplement or another use, and the country of sale. Two of the six are easy to omit and costly to discover late: the source, because it fixes the allergen declaration, and the market, because it fixes the document set. Commercial terms are not printed on this page; they belong on the quotation. ## What the sample has to prove The kilogram pouch is what a qualification is run on. Handle it as a lot: infrared and HPLC identity, assay on the dried basis, chloride, specific rotation, moisture and microbiology. Keep part of the same pack as the retained sample, and check that the lot code on the pouch matches the certificate and the quotation. A smaller bench quantity is a repack, not a sample of the catalog pack. If one is agreed, record it as a repack and do not assume it shares a lot with the production drum. A bridging test on the production lot costs less than discovering the difference after a batch has been blended. ## Terms that belong beside the commercial offer The quotation carries the pack, the timing, the trade term and the documents; the quality agreement carries the specification revision, a certificate for each lot, a retained sample, a retest period and change control. Here the change-control route must name the source as well as the process, because a move between shellfish and fermentation changes the allergen declaration even when the assay and chloride are unchanged. If a lot is contested, the retained sample and a joint re-test settle it better than photographs. Agree the referee laboratory and who pays for the test before the first shipment; a disagreement about the method is easier to resolve before there is a batch to hold. The glucosamine product page holds the catalog specification; the compliance page covers the destination documents; the stability page covers pack and storage; the quality page describes the release workflow; the logistics page covers shipping and documents. ### 05 The regulatory file for glucosamine hydrochloride URL: https://nutrition.rainwoodbio.com/products/specialty/glucosamine/compliance/ Reviewed: 2026-11-19 Glucosamine hydrochloride is sold as a food or dietary-supplement ingredient in many markets, and the route differs by destination. The supplier's file can name the frameworks and provide the lot documents, but the determination belongs to the buyer's regulatory team: a certificate describes the powder, not the permission to sell it. In one lineThe material is the same in every market; the route, the limits and the label are not, and the buyer's regulatory team owns that determination. ## The layers of a market file A market file is assembled in layers. The material layer is the specification: the salt, the CAS number, the source and the revision being bought. The lot layer is the certificate and the retained sample. The destination layer is the route, the limits and the label. The change layer is what happens when the source, process or pack changes. A supplier can fill the first two; the third belongs to the buyer; the fourth belongs to both, because a source change rewrites the allergen statement. Form and source both belong in the file, not in a footnote. A dossier written around glucosamine hydrochloride does not cover a sulfate complex or N-acetyl glucosamine, because the ingredient name, the counter-ion and the mass per serving change. A shellfish-derived lot carries a crustacean declaration that a fermentation-derived lot does not. Keep the three facts, form, source and specification revision, together with dated documents. ## European Union For a food-supplement application in the EU, the instruments to read are Regulation (EC) No 178/2002 on general food law and Directive 2002/46/EC on food supplements, together with Regulation (EU) No 1169/2011 on food information to consumers. Contaminants sit under Commission Regulation (EU) 2023/915, and claims under Regulation (EC) No 1924/2006. The consolidated text in force is the reference; a trade summary is not. Two questions need the buyer's answer rather than the supplier's assurance. Whether the destination permits this ingredient, and on which basis, is a determination for the buyer's regulatory team; this page does not assert a novel-food authorisation, and Regulation (EU) 2015/2283 is the framework to test if the status is in doubt. Whether the crustacean allergen must be emphasised depends on the source: shrimp or crab shell requires the Annex II declaration under Regulation (EU) No 1169/2011, while a fermentation-derived lot has no crustacean entry but still needs an accurate source statement and a documented allergen assessment. ## United States In the United States, the usual route is a dietary supplement under DSHEA, the Dietary Supplement Health and Education Act of 1994. The definitions sit in section 201(ff) of the Federal Food, Drug, and Cosmetic Act, manufacturing in 21 CFR Part 111, and the Supplement Facts panel in 21 CFR 101.36. A new dietary ingredient notification under 21 U.S.C. 350b may be relevant; whether it applies is for the buyer's regulatory team to determine, and this page asserts neither a notification nor a pre-DSHEA status. The panel names the ingredient as sold, so “glucosamine hydrochloride” rather than “glucosamine”, and a sulfate complex should carry its counter-ion in the name. A shellfish-derived ingredient needs the US allergen declaration, and the source statement should sit on the label or in the material the brand relies on. Claims are reviewed apart from the certificate, and the finished product's category is a separate legal question from the specification of the drum. ## Contaminants and the finished-dose calculation The catalog limits are measured on the drum. A destination limit usually applies to the finished product as sold, so the file has to carry the arithmetic from the ingredient result to the daily dose. At 3 mg/kg, a 1,500 mg dose brings 4.5 µg of lead; a 500 mg dose brings 1.5 µg. That conversion is where a compliant lot and a compliant product can part company. Contaminant references to confirm for the destination | Element | Reference level | What the finished-product file shows | Lead (Pb) | 3.0 mg/kg in the EU food supplement | Lot result, method and dose calculation | Cadmium (Cd) | 1.0 mg/kg, with category exceptions to check | Lot result and the exception relied on | Mercury (Hg) | 0.10 mg/kg in the EU food supplement | Lot result and method | Arsenic (As) | Buyer or market limit | Agreed figure and method, stated on the certificate US federal law sets no general elemental limit for dietary supplements in the way the EU contaminant regulation does. There the limit comes from the buyer's specification, the testing obligation under 21 CFR Part 111 and any state rule such as California's Proposition 65. For a US shipment, the specification is the controlling document, and the method and reporting limit deserve as much attention as the result. ## Label names and claims The declaration follows the salt. “Glucosamine hydrochloride”, “glucosamine sulfate” with its counter-ion, and “N-acetyl glucosamine” are three declarations, and wording built for one does not transfer. In the EU, a claim must appear in the Register under Regulation (EC) No 1924/2006 with its conditions attached, and the reviewer checks the entry rather than a paraphrase. In the US, a structure/function claim carries the DSHEA disclaimer, while a disease claim would move the product into a different regulatory category. No claim for the ingredient is made on this page, and this page is not a label. The brand's reviewer confirms the wording, the form and the market before artwork is signed off; a certificate does not approve a claim. ## Documents that travel with the lot - Lot certificate with methods, limits and results. - Specification and technical data sheet at the agreed revision. - Safety data sheet for handling and transport. - Source and origin declaration: shellfish or fermentation, and the country of origin. - Allergen declaration, including the crustacean statement where the source requires it. - GMO, residual-solvent and non-irradiation statements; halal or kosher certificates on request. - Elemental and microbiological results, and the stability summary for the pack being bought. ## Checklist before the first order - The purchase order names the salt, the CAS number and the source. - The specification revision on file matches the certificate and the quotation. - The allergen declaration matches the source, and the artwork carries it. - The elemental results have been converted to the finished daily dose. - The destination route and the label wording have been confirmed by the buyer's regulatory team. - Change control covers a source switch, a process change and a pack change. The catalog specification is on the glucosamine product page; the lot tests are on the COA page; the analytical evidence is on the identity page. The EU regulatory note and the US regulatory note give the framework references, and the quality page describes the release file. ### 06 How we prove a lot is glucosamine hydrochloride URL: https://nutrition.rainwoodbio.com/products/specialty/glucosamine/identity/ Reviewed: 2026-11-19 A glucosamine hydrochloride lot stands up to five checks: the paperwork names the salt and its CAS number, infrared and HPLC match the reference, the chloride titration lands between 16.2% and 17.0%, the specific rotation sits at +70.0° to +73.0° on the dried basis, and assay plus moisture account for the mass. An assay percentage on its own cannot separate the hydrochloride from the sulfate, from the free base or from a sugar blend, because each of those can be made to elute in the same window. In one lineChloride names the salt, rotation names the enantiomer, and the mass balance catches what the assay integrates away. ## Five layers of identity Each piece of evidence settles a different question, so an answer to the first alone describes paperwork, not powder. The order below moves from the weakest evidence to the most specific. Identity evidence for glucosamine hydrochloride | Evidence | Question it settles | Method | What a pass means | Paperwork | Which salt is claimed? | Name, CAS number, formula | The documents agree with each other | Infrared | Is the solid the reference salt? | FTIR against a reference spectrum | Salt and crystal together | Chromatography | Is the molecule glucosamine? | HPLC retention against a standard | The molecule, not the counter-ion | Chloride | Is the counter-ion chloride? | Titration | The hydrochloride salt | Optical rotation | Which enantiomer is present? | Polarimetry on the dried basis | The D-form | Mass balance | Is the powder diluted? | Assay, loss on drying, impurity profile | Numbers that fit together Infrared is the evidence that sees the salt and the crystal at once. Two lots with identical HPLC retention can give different infrared spectra when one is a different hydrate or a blend with a carrier, which is why the certificate carries both identification lines. ## The chloride-to-assay ratio The hydrochloride carries one chloride per glucosamine, which is 35.45 ÷ 215.63 = 16.44% by mass. The catalog window of 16.2–17.0% is roughly 98.5% to 103.4% of that figure, wide enough for titration and standard variation but not wide enough to hide a different counter-ion. The pair should track together: a lot at 99.0% assay on the dried basis carries about 16.3% chloride by stoichiometry (0.990 × 16.44). A lot reporting 99.0% assay with 14.8% chloride is not a hydrochloride with a low assay; it is a different salt or a blend. Read the pair as a consistency check rather than an equation. The titration does not distinguish chloride bound to glucosamine from chloride in a trace of sodium chloride, and the assay is calibrated against a standard whose own purity has an uncertainty. What the ratio catches reliably is the large deviation: the sulfate complex carries little or no chloride and brings potassium or sodium instead, and the free base carries none at all. The mass balance runs beside the ratio. The as-is assay, the loss on drying and the impurity load should account for the powder, with the chloride inside the assay rather than added beside it. A lot whose numbers sum to well over 100% has a method problem or a second chloride source; one that sums well under 100% is holding water or an unmeasured diluent. ## The solid form: crystallinity and the XRD check Glucosamine hydrochloride is crystalline, and X-ray diffraction reads that crystal directly. A crystalline lot gives sharp reflections at defined angles; an amorphous carrier or a syrup-dried blend gives a broad halo. The pattern can also reveal a crystalline diluent, most obviously sodium chloride, whose reflections sit at their own angles and are easy to recognise in a mixture. Diffraction is not part of the routine release panel here, and a bare “XRD conforms” statement carries little weight without the pattern or the reference. When solid form is the question, request the reference pattern and the detection limit. For a disputed lot, diffraction plus infrared plus chloride plus rotation is stronger than any one of them, because each answers a different part of the same question. ## What adulteration looks like Substitutions in a glucosamine hydrochloride lot and the signals they leave | Adulterant | What it does | Signal | Confirming test | Glucosamine sulfate complex | Replaces the counter-ion; adds potassium or sodium | Chloride below 16.2%; sulfate and K or Na present | Chloride, ion chromatography, ICP-OES | Glucosamine free base | No counter-ion; alkaline solution | Chloride low; pH high; assay may still pass | Chloride, pH, infrared | N-Acetyl glucosamine | A different molecule with a similar name | Different retention; rotation near +40° to +43° | HPLC, specific rotation, infrared | Glucose, sucrose or maltodextrin | Dilutes the powder; feeds browning | Extra HPLC peaks; rotation shift; assay low | HPLC, rotation, loss on drying | Sodium chloride | Raises chloride and ash; lowers glucosamine | Chloride above 17.0%; sodium present; assay low | Chloride, sodium by ICP-OES, assay | L-Glucosamine or a racemic blend | Same mass, wrong stereochemistry | Rotation below +70.0° | Specific rotation, chiral method Colour is the weakest signal and the easiest to fake. White crystalline powder looks like white crystalline powder, and a sugar blend can reproduce the appearance. The stronger evidence is the chloride figure, the rotation and the chromatogram, and the strongest is the three together with a moisture result that closes the balance. ## How to write identity into the specification - “D-Glucosamine hydrochloride, CAS 66-84-2, C6H14ClNO5.” - “Assay 98.0–102.0% on the dried basis by HPLC; loss on drying ≤1.0%.” - “Identification by infrared and by HPLC retention against a glucosamine hydrochloride standard.” - “Chloride 16.2–17.0% by titration; report the titration mode.” - “Specific rotation +70.0° to +73.0° on the dried basis; state concentration, temperature and equilibration time.” - “No sulfate, no sodium chloride and no added sugar above the agreed reporting limit.” - “Source and allergen statement named; destination market agreed before purchase.” ## Five questions for the supplier - Which salt does this lot carry, and what CAS number is printed on the certificate? - What chloride figure did the titration return, and which endpoint method was used? - What rotation was observed, at what concentration, temperature and standing time? - May I see the infrared spectrum and the chromatogram, not just the assay total? - If we disagree about the result, will you re-test the retained sample jointly? Those five answers, taken together, are an identity file; one percentage is not. The product hub carries the catalog specification, the COA page maps each figure to its certificate line, the grades page compares the three forms, and the HPLC method note explains the separation. The editorial policy sets out how these pages are sourced and reviewed. ### 01 What the COA for reduced L-glutathione actually contains URL: https://nutrition.rainwoodbio.com/products/specialty/glutathione/coa/ Reviewed: 2026-11-19 A certificate for a reduced L-glutathione lot reports appearance, identification by HPLC and infrared spectroscopy, assay by HPLC, loss on drying, the pH of a 5% solution, the heavy-metal panel, microbiology and particle size. Two lines decide whether the document is auditable: the assay, with its method and its basis, and the limit that was set for oxidised glutathione (GSSG). A percentage on its own does not say which of the two glutathione forms the laboratory counted. In one lineA glutathione result means little without its two neighbours on the certificate: the HPLC method that produced the percentage and the limit set for the oxidised form. ## The certificate, line by line A certificate earns its place when every line stands on its own. Each parameter should carry the test, the way the number was obtained, and the boundary the lot had to clear. A line that reads only “conforms” hands over a verdict and withholds the basis for it. Identity, assay, moisture and contaminants · reduced L-glutathione | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | HPLC retention and infrared spectrum | Conforms to the reduced reference | Assay | HPLC | 98.0–101.0% | Oxidised form (GSSG) | HPLC, same run or a dedicated method | Limit agreed in the specification; the lot result reported beside it | Loss on drying | Gravimetric | ≤1.0% | pH (5% solution) | Potentiometric | 2.0–3.0 | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh The identification row is only as good as the reference it was compared against. Infrared spectroscopy separates the reduced form from the oxidised one, but a certificate that prints “IR conforms” without naming the standard could have compared the lot with the disulfide. Ask which reference was used; the same question applies to the retention time. ## The assay, its method and its basis The catalog range is 98.0–101.0% by HPLC. Three percentage points is a narrow band for a peptide of this size, and a narrow band is only meaningful if the method is fixed. Glutathione has no strong visible chromophore, so the method usually reads the peptide backbone at a low ultraviolet wavelength or derivatises the thiol before detection. The certificate should name the column, the mobile phase, the detection mode and the standard. External standard and area normalisation are not the same measurement. Area normalisation counts the peaks that elute and divides by their total, so water, salts and a sugar carrier are invisible to it; a diluted lot can read 99% by area and fail by external standard. Ask which of the two produced a single figure. The basis matters almost as much. Loss on drying is capped at 1.0%, and the two bases therefore differ by up to one point: a lot at 99.4% as-is is 100.4% on the dried basis, which sits outside the catalog band. The assay row should say which basis was used rather than leaving it to a footnote, and the measured loss on drying belongs in the row beneath it. The pH line, 2.0–3.0 for a 5% solution, reflects the free carboxyl groups of the peptide; it supports the form and the wash step but is not a purity test. ## Release limit against batch result One column states the boundary the lot had to clear; the other records what the laboratory found. Keeping them apart, with the method alongside, is what makes a certificate readable. A result column that repeats the specification range says nothing about the lot. What the result column should carry | Parameter | Release limit | Result column | Assay | 98.0–101.0% | A measured percentage, with the method and the basis | GSSG | Limit agreed in the specification | A measured percentage or area, with the standard used | Loss on drying | ≤1.0% | A measured percentage | pH (5% solution) | 2.0–3.0 | The measured reading and the temperature | Heavy metals | Per element | A figure in mg/kg for each element | Microbiology | Counts and absence | A count and an absence result for that lot “Passes specification” is a verdict, and the figures above it should let the reader arrive there alone. Heavy metals are shown element by element, because a combined total conceals which one ran high. Microbiology needs a count and an absence statement. ## What moves between batches The fermentation and the crystallisation steps are what shift the colour, the assay and the moisture. Milling and sieving move the particle-size result, so the 40 mesh line can shift with a new sieve and no change in chemistry. Drying moves loss on drying, and a drying step that runs warm also moves the GSSG figure: heat is one of the routes by which the reduced form pairs into the disulfide. Colour is the hardest line to put a number on, and often the one that says most. White to off-white covers a wide window, and a shift inside it is not an identity failure. A lot that reads greyer or duller than the series, with a sulfur odour that is stronger than usual and an assay at the bottom of the band, is describing oxidation rather than a different material. Read the three lines together before rejecting on appearance. A trend across lots says more than a single result near an edge. Assay drifting down while loss on drying climbs is a moisture story; assay drifting down while pH stays put and GSSG climbs is an oxidation story. The lot code on the certificate should appear unchanged on the pouch, the drum and the sample kept back. ## When an outside test is worth it An outside test earns its place for a new source, a first regulated shipment, a disputed form, or a claim that the powder is the reduced tripeptide. The panel worth paying for is not a photocopy: HPLC with a GSSG standard and a reported ratio, infrared spectroscopy against a named reference, loss on drying, the heavy-metal panel, microbiology, and a free-thiol titration as an orthogonal check. Have the laboratory put a figure on its detection limit for every screen. “Not detected” with no limit beside it describes the method's reach, not the sample. Handling is part of the evidence as well: the portion tested should be the portion held back, and the report should name the lot. ## What to compare between suppliers Six lines are worth placing side by side: form and CAS number; assay with its method and basis; GSSG limit with the lot result; loss on drying; microbiology and heavy metals; pack size and lot code. Two offers that match on the percentage but part company on the basis or the GSSG ceiling are not selling the same specification. The catalog specification sits on the glutathione product page. The identity page sets out how the two forms are told apart; market conditions are on the compliance page; the chromatographic method is described in the HPLC method note; the quality page describes how a lot is released. ### 02 Reduced, oxidised, liposomal: choosing a glutathione grade URL: https://nutrition.rainwoodbio.com/products/specialty/glutathione/grades/ Reviewed: 2026-11-19 The catalog grade is reduced L-glutathione, the free-thiol tripeptide, CAS 70-18-8. The material it is most often confused with is oxidised glutathione (GSSG), a dimer with its own CAS number, twice the molecular weight and a different assay. Liposomal and acetylated versions are a delivery format and a chemical derivative, not grades of the same powder. The grade decides the mass on the balance, the number on the certificate and the words on the label. In one lineThe grade is not a purity band but a different molecule, and the assay method, the colour and the label follow from that choice. ## Why the form comes before the grade Glutathione is a tripeptide of glutamic acid, cysteine and glycine, joined through a γ-glutamyl bond that survives ordinary digestion and gives the molecule its shape. The cysteine side chain ends in a thiol group. Two of those thiols can pair in air to form a disulfide bridge, and the product is oxidised glutathione: two tripeptide units joined cystine-style, with no free thiol left. That single reaction is the whole reason the product has two identities. The reduced form is the one that is bought, sold and weighed in supplement manufacturing. The oxidised form is a degradation product, an analytical standard and, in a few markets, a named ingredient in its own right. An order that names only “glutathione” leaves the oxidation state open, and with it the substance being bought. The manufacturing route does not settle the question. Glutathione is made by fermentation or by enzymatic synthesis, and either route produces the same tripeptide; what differs between sources is the impurity profile, the moisture and the residual oxidised fraction, and those are the lines a buyer can actually check. ## Reduced against oxidised Reduced L-glutathione and oxidised glutathione | Property | Reduced (GSH) | Oxidised (GSSG) | CAS number | 70-18-8 | 27025-41-8 | Formula | C10H17N3O6S | C20H32N6O12S2 | Molecular weight | 307.32 | 612.63 | Free thiol groups | One per molecule | None; the bond is a disulfide | Catalog assay | 98.0–101.0% by HPLC | Its own range, on its own method | Appearance | White to off-white powder | A solid described on its own certificate; an oxidised lot usually reads duller | Water solubility | Freely soluble; the solution is acidic | Soluble in water; its own solution specification | Label name | L-glutathione (reduced) | Glutathione disulfide, or oxidised glutathione The mass difference is small in proportion: 612.63 g of the oxidised form carries two glutathione units, 614.64 g of the reduced form, because the bridge costs two hydrogen atoms. That is exactly why a form error survives a weigh-up. A formulator who substitutes one for the other at the same weight will not see a mass-balance problem, only a label that names the wrong substance. ## Colour, moisture and handling The catalog powder is white to off-white, free-flowing, with at least 95% through 40 mesh. It is hygroscopic, and loss on drying is capped at 1.0%, so an open pouch in a humid room will move the moisture line before it moves anything else. The dry powder carries a faint sulfur note from the thiol; that note is part of the material, not a defect. A note that becomes sharp and persistent, with a duller colour and a falling assay, is oxidation. The 5% solution sits at pH 2.0–3.0 because the peptide still carries free carboxyl groups. That acidity is useful in a beverage, where it lowers the pH and slows the thiol oxidation that alkaline conditions accelerate, and it is a constraint in a capsule fill where an acid-sensitive excipient sits beside it. ## Dose arithmetic and the label The label declares the ingredient, so the weigh-up has to be corrected for assay. A formula that declares 500 mg of reduced L-glutathione per serving needs 500 ÷ 0.99 ≈ 505 mg of a 99.0% powder. The arithmetic is not a recommended intake; it is what keeps the declared quantity and the batch record in agreement. The oxidation state cannot be corrected by arithmetic. Because the two forms are almost equal per gram of glutathione equivalent, there is no conversion factor that turns an oxidised lot into a reduced one. If a blend is built on the oxidised form and the label says reduced, the number is right and the ingredient is wrong. Liposomal glutathione is reduced glutathione enclosed in a lipid vesicle. It is a delivery format: the label names the glutathione content, and the assay has to separate the peptide from a lipid matrix before it can measure it. S-acetyl glutathione is a different molecule with its own CAS number and its own specification, and N-acetylcysteine is not glutathione at all despite the shared letters. ## What to write into the specification - “L-Glutathione, reduced, CAS 70-18-8, C10H17N3O6S, molecular weight 307.32.” - “Assay 98.0–101.0% by HPLC, with the method and the basis stated.” - “Oxidised glutathione (GSSG) limit agreed and printed on the certificate, with the lot result.” - “Identification by HPLC retention and infrared spectrum against the reduced reference.” - “Loss on drying ≤1.0%; pH of a 5% solution 2.0–3.0; ≥95% through 40 mesh.” - “Heavy metals Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg; microbiology as listed.” - “Pack and storage condition named, because both are part of the stability claim.” ## When another form is the wrong purchase An oxidised lot is not a substitute for a reduced one, however close the assay looks, because the substance on the label would be different. A liposomal concentrate is not a substitute for the powder in a capsule line either: the dose is carried in the dispersion, the analysis is different and the pack has its own shelf life. The reverse also holds. A buyer who wants the disulfide as a reference standard should not accept the reduced powder and oxidise it in-house unless the oxidation is validated, because a partial conversion gives a mixture whose purity is unknown. The catalog specification is on the product hub. The level-four comparison takes the assay and label questions further; the COA page shows where the GSSG limit sits; the identity page sets out the tests that tell the two apart; the stability page explains why one of them is the other's degradation product. ### 02.1 Reduced vs oxidised glutathione: GSH, GSSG and the assay URL: https://nutrition.rainwoodbio.com/products/specialty/glutathione/grades/reduced-vs-oxidized/ Reviewed: 2026-11-19 Reduced glutathione (GSH) and oxidised glutathione (GSSG) are the same tripeptide in two oxidation states. GSH carries a free cysteine thiol; two GSH molecules joined through a disulfide bridge become GSSG. They differ by CAS number, 70-18-8 against 27025-41-8, by molecular weight, 307.32 against 612.63, by the number of free thiol groups, by assay and by label name. The mass per glutathione equivalent is almost identical, which is why a form error survives a weigh-up and only fails at the label. In one lineThe two forms are one oxidation reaction apart, and the difference that matters commercially is not the weight but the free thiol. ## One reaction, two identities Glutathione is γ-L-glutamyl-L-cysteinylglycine. The glutamyl bond is unusual: it runs through the side-chain carboxyl group rather than the α-carboxyl, which is what lets the peptide survive ordinary digestion. The cysteine residue supplies a thiol, and that thiol is the only part of the molecule that changes in the reaction that concerns a buyer. In air, and faster with heat, trace metals or an alkaline pH, two thiols lose their hydrogen and pair into a disulfide bond. The product is a dimer of two intact tripeptide units. Nothing else changes: the peptide bonds, carboxyl groups and amino groups are still there, which is why the forms behave similarly in water and differently in everything that matters. In a biological system the reaction runs both ways, through enzymes a supplement does not contain. In a drum it runs one way, and that asymmetry is the commercial difference between the products. ## Reduced against oxidised, property by property Reduced glutathione and oxidised glutathione | Property | Reduced (GSH) | Oxidised (GSSG) | CAS number | 70-18-8 | 27025-41-8 | Formula | C10H17N3O6S | C20H32N6O12S2 | Molecular weight | 307.32 | 612.63 | Free thiol groups | One | None | Assay | 98.0–101.0% by HPLC | Its own range on its own method | Colour | White to off-white | Described on its own certificate; an oxidised lot usually reads duller | Solubility | Freely soluble in water; acidic solution | Water-soluble; its own solution specification | Label name | L-Glutathione (reduced) | Glutathione disulfide, or oxidised glutathione The molecular weights are not a conversion factor. One mole of the oxidised form, 612.63 g, contains two moles of glutathione units, 614.64 g, because the bridge costs two hydrogen atoms. The mass ratio is 1.003, so there is no salt factor and no arithmetic that repairs a form error. ## What the assay measures, and why the GSSG limit is a separate line The catalog assay for the reduced grade is 98.0–101.0% by HPLC, a band three percentage points wide. A band that narrow only means something when the method is fixed and the oxidised fraction is measured. A non-specific method that counts everything with a thiol or a peptide bond can report a total near 100% while the reduced content sits at the bottom of the band: a lot with 1.5% of the oxidised form and 98.5% of the reduced form sums to 100% as “total glutathione” and to 98.5% as the substance the label declares. That is why the GSSG limit belongs on the certificate as its own line, with its own standard. The limit is agreed in the specification rather than printed in the catalog summary, because the right ceiling depends on the dose and on the storage the finished product will see. The mass balance closes the picture. Assay plus loss on drying plus the oxidised fraction plus ash should approach 100%. A lot at 99% assay, 0.4% moisture and 2% oxidised form does not add up, and the missing mass is something the certificate has not named. ## Solubility, pH and the solution The reduced form is freely soluble in water, and a 5% solution reads pH 2.0–3.0 because the peptide still carries free carboxyl groups. That acidity suits a beverage, where a low pH also slows thiol oxidation. The oxidised form is also water-soluble and has its own solution specification; the two solutions are not interchangeable, and the pH of a solution is not a redox test. A lot can read pH 2.5 and be half oxidised. Neither solution is a storage format: in water the reaction that made the dimer has oxygen, heat and time on its side, and a clear bottle standing in daylight is the last container to choose. A stick dissolved at the point of use avoids most of that exposure. ## Which one is more stable, and why the question is backwards The oxidised form is the product of the degradation, so in air it is the more stable: it has nowhere further to go by that route. The reduced form moves towards it and never moves back. That is why the shelf-life question for a reduced lot is really a question about the ratio, and why a specification without a GSSG limit and a retest period is incomplete. The conditions that speed the move are the ones described on the stability page: oxygen, heat, moisture, alkaline pH and trace metals. A drum stored warm for a year arrives with a different ratio from the one on its certificate, and the change may not be visible. ## What the label has to say The label names the substance that was weighed. For the reduced grade that means L-glutathione, with the reduction state written out; for the oxidised material it means glutathione disulfide or oxidised glutathione. A label that says only “glutathione” leaves the form open, and a reviewer may ask which substance the panel declares. Glutathione carries no nutrient reference value, so the panel states an amount per portion rather than a percentage of an NRV. In the EU the name and the quantity are mandatory particulars; in the US the Supplement Facts panel carries the dietary ingredient and its amount. A blend built on a glutathione-rich yeast is a different declaration from a defined amount of the peptide, and the panel has to match the assay behind it. ## When each form is the right purchase The reduced form is the commercial supplement grade and the one this catalog carries. It suits capsules, tablets and powder sticks, where the powder is weighed, blended and packed dry. It is the form named in most specifications and the one a formulator means by “glutathione”. The oxidised form is bought as a reference standard, for laboratory work, and occasionally as a named ingredient where the market file covers it. It cannot simply replace the reduced powder, and it does not carry the same label. Liposomal glutathione is a delivery format of the reduced form, and S-acetyl glutathione is a different molecule with its own CAS number. The catalog specification is on the product hub; the grades page sets this comparison in the wider range; the COA page shows how the ratio is reported; the identity page shows the tests that tell them apart; the HPLC note describes the separation. ### 03 Reduced glutathione oxidises; the pack sets the shelf life URL: https://nutrition.rainwoodbio.com/products/specialty/glutathione/stability/ Reviewed: 2026-11-19 Reduced glutathione fails by oxidation: two molecules pair into the disulfide and the reduced content falls while the powder still looks like a powder. Heat, moisture and alkaline pH all accelerate that path, and an aqueous solution is the fastest format of all. The dry powder in a sealed pack is the stable form; the shelf life belongs to the pack and the storage condition, not to the molecule in isolation. In one lineGlutathione does not fade away first; it pairs with itself into the oxidised dimer, so the shelf-life question is how fast the GSH to GSSG ratio moves. ## The powder, the seal and the moisture limit Loss on drying is capped at 1.0%, a tight limit for a hygroscopic powder. The material picks up water once the pouch is open; the water dilutes the as-is assay and gives the oxidation reaction a medium to run in. A pouch that is folded over and clipped is not a sealed pack. The dry powder carries a faint sulfur note, normal for a thiol. The note is a signal only when it changes character: sharper, longer-lasting, with a dull cast and an assay near the bottom of the band. Then the batch record and the GSSG result are worth more than the smell. Temperature and time act together. A sealed pouch at ambient warehouse temperature is the design case; a hot loading bay or a shelf above a heater is not. A cold drum should be left to reach room temperature, so no condensation settles on the powder. ## The solution is where the reaction runs In water the thiol can lose its proton, and the thiolate anion is the species that reacts with oxygen. The pKa of the cysteine thiol in glutathione is about 8.7, so at pH 2–3 almost none of it is deprotonated and the oxidation rate is at its lowest. That is why the 5% solution sits at pH 2.0–3.0, and why an alkaline drink is the harder matrix. Low pH slows the reaction; it does not stop it. Dissolved oxygen, trace copper and iron, warmth and a long hold at ambient all push the same way. A stock solution left on a bench over a weekend is a different material on Monday, and not visibly so. If a liquid is unavoidable, strip oxygen, keep the pH acidic, hold it cold, and validate the hold time in the actual matrix. A stick pack side-steps the problem, since the water is added by the consumer minutes before drinking. ## What drives degradation Factors that move reduced glutathione during storage | Factor | What it does | Control | Oxygen | Converts GSH to GSSG; the assay falls, the ratio moves | Sealed pack, low headspace, nitrogen where specified | Heat | Raises the rate of oxidation and of moisture migration | Cool store; cool process; short heat exposure | Alkaline pH | Raises the thiolate fraction and the reaction rate | Keep solutions acidic; check alkaline excipients | Moisture | Dilutes the as-is assay and enables solution chemistry | Sealed barrier pack; desiccant where needed | Metal ions | Copper and iron catalyse thiol oxidation | Avoid metal contact; use passivated or plastic equipment | Time in solution | Every hour adds exposure at the matrix pH | Validate hold time; make fresh where possible The factors are not independent: a warm alkaline solution in an open vessel combines all of them, and no single control repairs it. The question worth asking is not whether glutathione keeps, but how long it keeps in this pack, at this temperature. ## What the pack has to do Packing starts with the 1 kg foil pouch; the bulk unit is a 25 kg fiber drum with an inner liner. The foil is the moisture and light barrier and the heat seal is the weak point. A crease in the foil, a seal with a channel or a pinhole turns the pack into a slow leak, and the powder at the top of the pouch takes the moisture first. The drum relies on its liner. Close the liner between uses, stand the drum on a pallet rather than a bare floor in a damp store, and write the opening date on the side. The drum code, the liner code and the certificate should agree. Where storage will run for months, move the remainder into a smaller container with a moisture barrier. A desiccant buys time in a humid climate; it does not replace a sound seal. If the application calls for a modified atmosphere, it has to be ordered: the standard pack is not flushed with nitrogen. ## A stability protocol for the ingredient A protocol states the pack, the condition, the time points and the panel. The design usually pairs 25 °C/60% relative humidity for the long term, 30 °C/65% for the intermediate condition and 40 °C/75% for the accelerated arm, with one more arm for the pack that will actually ship. Test assay with its basis, the GSSG figure, loss on drying, appearance, pH and microbiology at each point. The GSSG result is the earliest indicator: it moves before the assay leaves its band, because a change of one or two percentage points in the oxidised fraction can still leave the total inside 98.0–101.0%. Report the individual results rather than a pass statement, and name the pack and lot family behind them. For a liquid, add a solution arm at the formula pH with the process heat load and the real container. A bulk-powder result does not transfer: the matrix, the oxygen level and the closure each change the rate. ## The finished formula changes the answer Capsules and tablets run at low water activity, yet the shell and excipients can still pass moisture across, and an alkaline excipient lifts the pH in the microenvironment around each particle. An effervescent tablet is the hardest case: water, an alkaline carbonate and an acid source in one package opened in a bathroom. That is a stability project, not a flavour choice. A drink mix is easier only if it stays dry: the consumer's water starts the reaction at the point of use, a short exposure. A ready-to-drink format is the same reaction with months on the clock. An overage is a labelling and stability decision; it cannot rescue a pack that admits moisture. ## How the shelf life is set There is no single shelf-life figure for glutathione in the abstract, because the pack and the storage condition are what fix it. The retest period sits on the specification, backed by a stability file for that pack at that condition. A figure without a pack and a condition is a claim rather than a shelf life. Once the retest period has run out, the retained sample must be re-assayed before use is extended, and the GSSG figure checked as well as the assay. A repacked container does not inherit the bulk figure. The product hub lists the packs; the COA page shows what a lot is tested for; the MOQ page covers pack and lead time; the HPLC note explains the assay; the quality page covers release. ### 04 Glutathione: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/specialty/glutathione/moq/ Reviewed: 2026-11-19 The MOQ for reduced L-glutathione is 1 kg, packed in a 1 kg foil pouch, with a 25 kg fiber drum and liner as the bulk unit. Lead time on the standard pack runs 1–7 days. A quotation that can be compared line for line needs six details: the oxidation state and CAS number, the assay method with its basis and the GSSG limit, the quantity and pack, the destination and Incoterm, the documents, and the intended market. In one lineA kilogram is the minimum because below that weight the material stops being a traceable lot and becomes a repack. ## Why the minimum is a kilogram A kilogram is enough for a bench trial, a retained sample and a third-party identity test, with powder left over. It travels as a parcel rather than a pallet, which matters when a formulator needs powder before the production plan is fixed. It is a packed, coded unit rather than a scoop taken from a drum. Anything smaller is normally divided out of a bulk lot and repacked under a new label. That adds handling, breaks the pack identity and weakens traceability, while the chemistry is unchanged. The drum trades the other way: fewer handlings per kilogram, at the cost of stock and a longer sit in the warehouse, and for glutathione the sit is the variable that matters. A drum held warm for a year is a slow oxidation experiment, and the GSSG figure at the end of it has moved. ## Packs and formats Standard glutathione packs | Unit | Fill | Where it fits | Handling points | Foil pouch | 1 kg | Bench trial and small runs | Moisture barrier; reseal after opening | Fiber drum with liner | 25 kg | Production | Liner is the barrier; lot code on drum and liner | Granulated | On request | Flow and dust | A different particle spec The catalog form is a 40 mesh powder, at least 95% through the sieve. Granulation is a different specification rather than a packing choice, and it moves the particle-size line, the bulk density and possibly the lead time. If the capsule line needs a freer-flowing powder, say so before the quotation. ## Lead time and dispatch A standard pack is dispatched 1–7 days after the order is confirmed. Inside that window sit picking, document preparation and dispatch; transit, customs clearance and the customer's own quality release sit outside it. A granulated or non-standard pack takes longer, and that extra time gets its own line rather than disappearing into the standard window. The dispatch date is worth asking for separately from the lead time. The certificate should be issued for the lot that ships, not copied from an earlier lot, and the documents should travel with the goods rather than follow them. ## The six details a quotation needs - Form and CAS number. “L-Glutathione, reduced, CAS 70-18-8.” A quotation for “glutathione” has left the oxidation state open. - Assay, method and GSSG limit. 98.0–101.0% by HPLC, the basis stated, and the oxidised-form limit printed on the certificate. - Quantity and pack. A 1 kg pouch, a 25 kg drum or a granulated variant, with the net weight of each unit. - Destination and Incoterm. The country, the address or port, and the trade term that decides who books the freight. - Documents. COA for the lot, specification, SDS, and the statements the importer needs: allergen, GMO, origin, residual solvents. - Intended use and market. Capsule, tablet, stick pack or another use, and the market where the finished product will be sold. An offer that omits the form and the market cannot be judged, since the same powder may suit one destination and fall outside the file in another. Commercial terms are not shown here; the quotation is where they appear. ## What the kilogram pack qualifies The kilogram is the qualification lot: identity, assay, GSSG, loss on drying and microbiology get tested from it before anything is scaled, and a portion stays back as the retained sample. The lot code on the sample, on the certificate and on the quotation should match. A sample with no lot behind it proves nothing. If the project needs a few hundred grams for a bench trial, raise it before ordering. A split carries its own traceability and has to be documented that way. Nothing guarantees that a bench split and the production drum share a lot number. If the project also buys alpha-lipoic acid or carnosine, each material keeps its own lot, certificate and retained sample. A combined shipment does not make two powders one lot, and a single certificate cannot cover both. ## Terms to settle before the first order The quotation holds the commercial terms, the trade term, pack, lead time and documents. The quality side goes alongside: specification revision, a certificate for every lot, retained samples, the retest period and how changes are controlled. The quality agreement is cheaper to negotiate while the relationship is still commercial. Returns are handled under the quotation and that agreement. When a lot misses the agreed specification, the route is the retained sample and a joint re-test; a photograph of the powder settles nothing. Agree who pays for the referee test and which laboratory both sides will accept, while the order is still commercial rather than adversarial. The product hub sets out the catalog specification; the COA page lists the release tests; the compliance page covers the market file; the stability page explains why pack and storage belong in the specification; the editorial policy describes how these pages are sourced and updated. ### 05 The regulatory file for reduced L-glutathione URL: https://nutrition.rainwoodbio.com/products/specialty/glutathione/compliance/ Reviewed: 2026-11-19 Reduced L-glutathione is sold as a food and dietary-supplement ingredient in many markets, and the file is built around the destination, not the substance name. In the European Union the framework is general food law, the food-supplements directive, the labelling regulation and the contaminant regulation, with the novel-food question answered separately. In the United States the route is the dietary-supplement framework. The buyer's regulatory team confirms which route covers the finished product; this page maps the checks and does not assert an authorisation or a notification. In one lineThe supplier can document the material; only the buyer's regulatory team can confirm that the destination route covers the finished product. ## Four questions the file has to answer Four questions run together: whether the substance is allowed for this use, what ceiling applies to the finished product, what the label must carry, and whether the wording the brand wants is permitted. Being an accepted food ingredient does not open every food category, and the ceiling set for a capsule is not the one that applies to a drink. The material file answers the first question only in part; the destination answers the rest. Glutathione adds a complication: the reduced and oxidised forms are different substances with different CAS numbers. A file that names “glutathione” without the oxidation state covers neither clearly. ## European Union Four instruments frame the file. Regulation (EC) No 178/2002 sets the general principles, including food safety and supplier traceability. Directive 2002/46/EC governs food supplements and lists permitted vitamin and mineral substances, which does not by itself resolve a peptide's status. Regulation (EU) No 1169/2011 sets the labelling particulars. Commission Regulation (EU) 2023/915 sets contaminant limits, and as of this review it is the text to read, with the consolidated version checked on the day the label is approved. Novel food is a separate question under Regulation (EU) 2015/2283. Whether an authorisation is needed, or a history of consumption before 15 May 1997 can be relied on, depends on the substance, the use and the evidence, and it is a question for the buyer's regulatory team. This page does not assert an entry on the Union list for glutathione, and a supplier statement should not be read as one. Several member states also require a notification before a supplement is placed on their market, and that step belongs to the brand. ## United States The US route is the dietary-supplement framework rather than a novel-food list. The ingredient must be a lawful dietary ingredient: it was on the US market as a dietary ingredient before 15 October 1994, a new dietary ingredient notification reached the FDA at least 75 days before marketing, or a GRAS basis covers the use. The finished product is then made under the dietary-supplement cGMP rule at 21 CFR 111 and labelled with a Supplement Facts panel. The basis attaches to the substance as manufactured and to the use level, not to the word glutathione on a data sheet. This page does not assert a notification or a GRAS conclusion; the supplier should be able to identify the route it depends on and produce the paperwork behind it, and the buyer keeps a copy. A structure/function statement belongs to the brand, which writes it, substantiates it and sets the DSHEA disclaimer beside it. A statement that names a disease, or that implies a disease outcome, is outside the framework in both markets. ## Contaminants and the dose conversion The catalog limits are raw-material limits; the finished supplement has to meet its own limit at its own daily dose. Heavy metals · catalog limit and EU supplement limit | Element | Catalog limit (material) | EU limit (food supplement, as of this review) | Lead | ≤3 mg/kg | 3.0 mg/kg | Arsenic | ≤2 mg/kg | Not harmonised; Member State limits possible | Cadmium | ≤1 mg/kg | 1.0 mg/kg | Mercury | ≤0.1 mg/kg | 0.10 mg/kg A 500 mg daily dose of a material at the 3 mg/kg lead limit contributes 1.5 µg of lead to the day's intake, and the finished supplement still has to meet the 3.0 mg/kg ceiling at its own dose. The material limit controls what is bought; the finished-product limit is the one a regulator measures. Microbiology stands apart: total plate count, yeasts and moulds, and absence of E. coli and Salmonella, with the limits on the COA page. ## Claims and label wording In the EU, a health claim has to come from the register kept under Regulation (EC) No 1924/2006 and its implementing list. The register changes, so the wording is checked against the current text before printing. The working assumption for this ingredient is that no authorised claim exists, which means the label carries the mandatory particulars and nothing that reads as a health claim. Words such as “antioxidant” or “supports the immune system” are claims, and a claim needs an authorisation before it can appear. The label names the ingredient and the amount per portion. No nutrient reference value is set for glutathione, so the declaration is a quantity rather than a percentage of an NRV. In the US the Supplement Facts panel names the dietary ingredient, and the form should be written out rather than left generic. A blend built on glutathione-rich yeast is not the same declaration as a defined amount of L-glutathione; a peptide claim needs an assay of the peptide, not of the blend. The grades page covers how the forms differ on the label. ## The document pack The file that supports a regulated launch normally holds: - A lot COA with assay and method, the GSSG result, loss on drying, pH, heavy metals, microbiology and particle size. - A specification and technical data sheet naming the reduced form, the CAS number and the pack. - A safety data sheet in the 16-section format. - The destination framework reference: the EU instruments above, or the US dietary-ingredient basis. - Allergen, GMO, origin, residual-solvent and BSE/TSE statements. - A third-party certificate where the buyer's review requires one. Every document should name or point to the lot. A generic data sheet beside a lot-specific certificate is not a matched pair unless the form, the grade and the pack agree. ## Checklist before the first order - Is the oxidation state named, with CAS 70-18-8, in the specification, the quotation and the certificate? - Has the destination route been confirmed for this substance and this use by the buyer's regulatory team? - Is the daily dose below the applicable level, and is the contaminant result converted to that dose? - Does the label carry the required name and quantity, and is every claim authorised or removed? - Is every document on file tied to the lot that will ship? - Are the source, process and pack under change control? The product hub holds the catalog specification; the identity page walks through the tests behind the file; the EU regulatory note and the US regulatory note expand the frameworks; the quality page explains how a lot file is put together. The map above is a starting point, not legal advice; the text in force in the destination market is what decides. ### 06 How we prove a glutathione lot is the reduced form URL: https://nutrition.rainwoodbio.com/products/specialty/glutathione/identity/ Reviewed: 2026-11-19 A lot is reduced L-glutathione when four measurements agree: the chromatogram matches the reduced reference and shows the oxidised peak, the infrared spectrum matches the same reference, the free-thiol titration returns one thiol per molecule, and the moisture accounts for the rest of the mass. The assay on its own cannot separate GSH from GSSG, from a dilution with a carrier, or from another thiol sold under the same name. The reduction state is the line most certificates leave out. In one lineAssay counts a peak; identity needs the retention, the infrared spectrum, the free thiol and the mass balance to agree. ## The four layers of identity Each line below answers a different question, and no single one answers them all. A supplier who stops after the first has described a label, not a material. What each identity test can, and cannot, show | Layer | Question | Test | What it cannot show | Document | Are the form and CAS named? | Name, CAS 70-18-8, formula | Anything about the powder | Chromatography | Is the main peak the right peptide? | HPLC retention against the reduced standard, with a GSSG peak | The identity of a co-eluting impurity | Spectroscopy | Does the solid match the reference? | Infrared spectrum against the reduced reference | A small oxidised fraction | Thiol and mass | Is the reduction state right, and does the mass close? | Free-thiol titration, loss on drying, assay | Whether the carrier is a sugar or a salt ## The GSH to GSSG ratio, and the ratios that do not help The most useful number on a glutathione chromatogram is not the main peak height but the ratio between the two peaks. A method that injects a GSSG standard as well as a GSH standard can report the reduced content, the oxidised content and the ratio between them. That ratio is what storage moves first, and it is what a single “assay 99%” figure conceals. Elemental sulfur looks like an obvious check and is a poor one. The theoretical sulfur content of the reduced form is 10.43% and of the oxidised form 10.47%, because the disulfide bridge joins two identical sulfur-containing units. A sulfur result near 10.4% therefore confirms that the powder contains the cysteine tripeptide, and tells the reader nothing about which oxidation state it is in. The ratio that does discriminate is the thiol-to-molecule ratio. Each reduced molecule carries exactly one free thiol; the oxidised dimer carries none. A titration with a thiol reagent such as DTNB returns one mole of coloured product per mole of reduced glutathione and essentially none for the disulfide. Run against the assay, that ratio is a direct check on the reduction state that does not depend on a chromatographic retention time. Molecular weight is the other independent handle. A mass detector or a mass spectrometer places the reduced molecule at m/z 308 [M+H]+ and the dimer at m/z 613, so one injection can show which species is present without relying on a retention time or a reference standard. The chromatographic ratio also has a caveat: it is only as good as the standard. A method calibrated on GSH alone can report an oxidised peak without quantifying it, and a method that ignores the oxidised peak entirely will call a partly oxidised lot 99% pure. Ask which standard was injected and whether the GSSG limit is measured or assumed. ## The solid state, and what diffraction adds X-ray diffraction sees how the molecules pack in a crystal, so it answers a different question from the assay. A crystalline reduced lot gives a sharp pattern; a powder cut with maltodextrin or dextrose diffracts as a broad hump carrying the carrier's own lines, which is how a blend sold as pure shows itself. The oxidised form is a different molecule and has its own pattern, so a physical mixture of the two can show both. It is a supporting test, not a purity assay. Water is poorly seen, an amorphous lot gives no useful pattern at all, and grinding broadens the peaks of a fine powder without any change in chemistry. Read the diffractogram beside the particle-size result and the moisture, not instead of them. ## What adulteration looks like Substitution routes for reduced glutathione and the signals | Route | How it shows | Test | Oxidised form blended in | Assay passes, thiol titre low, GSSG peak large | HPLC with a GSSG standard; thiol titration | Dilution with a carrier | Assay low, ash or sugar present, amorphous halo | Assay, loss on drying, XRD | Cysteine or another thiol | Extra peak, thiol titre high for the assay | HPLC related substances; thiol titration | Total-thiol assay quoted as purity | High number, no chromatogram | Ask for the HPLC method and the standard | Moisture | Loss on drying high, as-is assay low | Loss on drying, then the basis | Yeast extract sold as the peptide | Low peptide content, many peaks, colour | Assay by HPLC, amino-acid profile Of the six routes, colour is the easiest to imitate. White to off-white is a broad window, and a mill can bring a blend into it. The stronger signals are the thiol titre, the oxidised peak and the mass balance between assay and moisture. ## How to write identity into the specification - “L-Glutathione, reduced, CAS 70-18-8, C10H17N3O6S, molecular weight 307.32.” - “Assay 98.0–101.0% by HPLC, with the method and the basis stated.” - “Identification by HPLC retention and by infrared against the reduced reference.” - “Oxidised glutathione limit stated, with the lot result and the standard used.” - “Loss on drying ≤1.0%; pH of a 5% solution 2.0–3.0; ≥95% through 40 mesh.” - “No carrier; if a blend is supplied, the peptide content and the carrier are declared.” ## Five questions for the supplier - Which oxidation state is this lot, and which CAS number appears on the certificate? - Was a GSSG standard injected with the sample, and what is the measured ratio? - Which reference did the infrared comparison use? - What is the free-thiol result, and how was it measured? - Will you release the chromatogram and the spectrum, or only the percentage? Those five answers, taken together, are what an identity file looks like; a percentage on its own is not. The catalog specification is on the product hub; the COA page maps each figure to its line; the grades page compares the two oxidation states; the level-four comparison covers the assay and label consequences; the HPLC and infrared method notes explain the measurements behind them. ### 01 What the NAG certificate of analysis actually reports URL: https://nutrition.rainwoodbio.com/products/specialty/n-acetyl-glucosamine/coa/ Reviewed: 2026-11-19 An N-acetyl glucosamine certificate carries four kinds of evidence: appearance and identification, the HPLC assay at 98.0–102.0%, the specific rotation at +40.0° to +43.0° on the dried basis, and the remaining lines of moisture, pH, heavy metals, microbiology and particle size. Each parameter should be shown with the method used and the limit it was released against, and the lot result should be a measured value rather than a restatement of the limit. The tables below give the catalog ranges; the certificate for a given lot is what describes that pack. In one lineThe NAG certificate is read as a set: the HPLC assay counts NAG, the rotation separates it from glucosamine, and the loss on drying says how much of the powder the assay did not count. ## The certificate as a test report A COA earns its place when every line can be checked without asking the supplier what it meant. Three columns do that work: the parameter, the method that produced the number, and the release limit for the lot. A line that reads only “conforms” records a decision but not the measurement behind it. The identification lines answer what the powder is; the assay answers how much of it is there. Release tests and limits for an N-acetyl glucosamine lot | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | IR and HPLC versus a reference | Conforms to the reference | Assay (NAG) | HPLC with UV detection | 98.0–102.0% | Specific rotation | Polarimetry after drying | +40.0° to +43.0° (dried basis) | Loss on drying | Gravimetric | ≤1.0% | pH (5% solution) | Potentiometric | 3.5–5.0 | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh ## Basis, moisture and what the assay counts Two lines depend on a moisture reference, and the certificate should name which one it used. Rotation is measured on the dried substance because water lowers the angle; a wet sample read without correction can fall outside the window for reasons that have nothing to do with identity. Use the loss on drying from the same test run, not a value carried over from an earlier release. The 98.0–102.0% assay is an HPLC figure, and the catalog range does not fix its basis, so the certificate has to state one. On a dried basis, a powder that assays 99.0% as received with 0.8% loss on drying works out at 99.80% dry; on an as-received basis, the same lot reads 99.0% and the moisture is read beside it. Quotations that mix the two conventions are not comparable. The analyte is NAG, not glucosamine. The method should name an N-acetyl glucosamine standard, the column, the mobile phase and the detection wavelength. Calling a NAG result “glucosamine 98%” mislabels the analyte even when the percentage is inside the range. The HPLC method note sets out the separation and the standard. ## Release limit versus batch result Each specification line has two numbers attached to it: the boundary the lot had to meet, and the value the laboratory actually obtained. They belong in different columns. Repeating the limit in the result column tells the reader nothing about the lot. Limit, result and the evidence between them | Parameter | Release limit | Result column | Assay | 98.0–102.0% by HPLC | The actual value, plus the basis and method behind it | Specific rotation | +40.0° to +43.0° dried basis | The angle, the temperature and the dry basis | Loss on drying | ≤1.0% | The percentage of water and volatiles found | pH | 3.5–5.0 in 5% solution | The reading, the concentration and the temperature | Heavy metals | Per element | A mg/kg value for each metal separately | Microbiology | Counts and absence | The colony count plus the absence result | Particle size | ≥95% through 40 mesh | The share that passed the sieve A pass statement is a summary, not evidence. The reader should be able to reconstruct it from the figures: a value per metal rather than one combined total, a count and an absence statement for the microbes, and an angle with its temperature and basis for the rotation. ## What moves between batches Different process steps leave different marks on the certificate. The source — shellfish or fermentation — can shift colour, odour and minor peak patterns while the CAS number and the assay range stay the same. Crystallisation and drying change the moisture, which in turn changes the as-received assay. Milling changes only the particle-size result. Hydrolysis is the trend specific to this molecule. At low pH or high temperature NAG can shed its acetyl group and appear as glucosamine, so a lot that was held warm or in acidic liquor may carry free glucosamine while the NAG assay still passes. The catalog does not set a free-glucosamine limit; if the market file or a stability study needs one, it is added as a named test. ## When to order an outside test Outside testing earns its place in four situations: a new source, a first consignment to a regulated market, a rotation result close to a limit, or a disputed identity. The panel should be chosen for the question, not copied from the certificate: IR and HPLC for identity, polarimetry for rotation, loss on drying, ICP-MS for the metals, microbiology, and a free-glucosamine assay if hydrolysis is suspected. For a shellfish-derived lot, the allergen statement should be checked against the source record. Every screen should come with its detection limit. A “not detected” line without a limit says something about the method, not about the powder. Keep the tested sample as the retained sample and make sure the report carries the lot code. ## What to compare between suppliers Six lines make suppliers comparable: CAS number and source; assay value and basis; rotation with its basis; loss on drying; the metals and microbiology results; and the pack size with its lot code. If two offers agree on assay but not on source, rotation or basis, they are not offering the same powder. Catalog ranges are published on the NAG product page; source and mesh are compared on the grades page; the analytical separation from glucosamine is on the identity page; the assay is described in the HPLC note; release is described on the quality page. ### 02 NAG grades: source, particle form and the specification URL: https://nutrition.rainwoodbio.com/products/specialty/n-acetyl-glucosamine/grades/ Reviewed: 2026-11-19 N-Acetyl glucosamine is sold at one catalog assay range, 98.0–102.0% by HPLC, and the choices that matter around it are the source and the particle form. The source is shellfish or fermentation, and it sets the allergen statement and some of the documentation; the particle form is a 40 mesh powder or a granulate, and it decides flow, fill weight and dust. Neither choice changes the molecule, the CAS number or the assay range. In one lineSource and particle form are the real NAG grade decisions: the catalog assay stays at 98.0–102.0%, while the allergen statement, the flow and the documents change. ## Why one molecule still has grade choices The molecule is fixed: N-acetyl-D-glucosamine, CAS 7512-17-6, C8H15NO6, molecular weight 221.21. What varies is where the material comes from and how it is finished. Shellfish-derived NAG starts from chitin in shrimp or crab shell; the fermentation route builds the same molecule from a microbial process. Both routes end at the same certificate lines, but they do not end at the same paperwork. The second choice is physical. The catalog form is a powder with ≥95% through 40 mesh, and a granulated form is available on request. A granulate flows faster on a tableting press and generates less dust in a stick-pack line, while a 40 mesh powder disperses and dissolves more quickly in water. The chemistry is unchanged, but the fill weight, the blend time and the dust-control measures are not. ## Shellfish-derived against fermentation-derived Two NAG sources at the same specification | Property | Shellfish-derived | Fermentation-derived | Starting material | Chitin from shrimp or crab shell | Microbial fermentation | CAS number | 7512-17-6 | 7512-17-6 | Assay (HPLC) | 98.0–102.0% | 98.0–102.0% | Appearance | White to off-white powder | White to off-white powder | Allergen statement | A crustacean shellfish declaration may apply | Non-shellfish source; statement supplied per lot | Source record | Species, origin and allergen statement | Process, origin and statement on process aids | Typical buyer need | Labels and markets that accept a shellfish source | Labels that need a non-shellfish source The two sources are not interchangeable at the label level. A brand that has built a shellfish-free position cannot move to the shellfish route without a new allergen review, and a brand that already declares crustacean shellfish still has to confirm that the statement covers this ingredient and this lot. The source is a specification line, not a purchasing detail that can be swapped when stock is short. Source also affects the paperwork a buyer should expect: a species and origin record for the shellfish route, and a statement on the fermentation organism and process aids for the fermentation route. Neither route removes the need for the allergen assessment of the finished formula, because the excipients, the capsule shell and the processing aids have their own declarations. ## Solubility, pH and the granulate NAG is soluble in water and the solution is slightly acidic: the catalog pH for a 5% solution is 3.5–5.0. That acidity is part of the material, not an impurity, and it matters twice. It sets the taste and the buffer load in a drink mix, and it is the condition under which the acetyl group can hydrolyse if the solution is also held warm. A formulator who adjusts the pH should recheck both the appearance and the free-glucosamine level. The powder is hygroscopic. The loss on drying limit is ≤1.0%, which is tight enough that an open pouch in a humid room will show it. A granulate can improve flow without changing the molecule, but a granulate made with a binder or a carrier is a different specification: the assay per gram, the label and the particle-size line all move. Ask for the composition of the granulate, not only its mesh. Bulk density and particle size are finishing properties. A 40 mesh powder and a granulate can meet the same assay, rotation and moisture limits and behave differently in a hopper. The specification should state the form and the mesh, because a certificate that reports only “powder” has not described what will arrive. ## Use level and the label NAG is declared as N-acetyl glucosamine, and its label line states the NAG mass. There is no glucosamine-base conversion to apply: the hydrochloride is 83.1% glucosamine base, while NAG carries an acetyl group and is a different molecule. A formulation that switches from glucosamine hydrochloride to NAG at the same milligram weight has changed the declared ingredient, not the dose. The use level is set by the brand's label, the destination's rules and the finished-product testing. It is not derived from a glucosamine figure and it cannot be increased to reach one. If a label must declare glucosamine, NAG is the wrong input; if the label declares N-acetyl glucosamine, the weigh-up uses the NAG assay and the NAG mass. The level-four comparison works through the arithmetic. The dosage form follows the physical grade. A capsule or tablet takes the 40 mesh powder or a granulate; for a stick pack or drink mix, the powder is the practical form because it dissolves; a wet-granulation step adds water and heat, which is the hydrolysis risk described on the stability page. The choice of form belongs to the process, and it should be made before the specification is frozen. ## What to write into the specification - “N-Acetyl-D-glucosamine, CAS 7512-17-6, C8H15NO6, molecular weight 221.21.” - “Origin: shellfish or fermentation, declared on the certificate, with the allergen declaration.” - “HPLC assay 98.0–102.0%; the certificate states the basis it used.” - “Rotation +40.0° to +43.0° after drying; moisture ≤1.0%.” - “pH 3.5–5.0 for a 5% solution; identity confirmed by IR and HPLC.” - “Particle size: 95% or more passes a 40 mesh sieve; a granulate is specified separately.” - “Metals and microbiology as listed; a free-glucosamine limit only if agreed.” - “Before ordering, the buyer confirms where the material may be sold and by which route.” ## When NAG is the wrong ingredient NAG is the wrong ingredient when the label, the buyer's specification or the destination file calls for glucosamine. Glucosamine hydrochloride and glucosamine sulfate are separate substances with their own CAS numbers, assay bases and dose arithmetic, and they are covered on the glucosamine product page. Substituting one for the other is a change of ingredient, not a change of grade. It is also the wrong choice when the process cannot keep the powder dry or the solution cool. NAG hydrolyses to glucosamine at low pH or high temperature, so a wet process with a long warm hold is a poor fit unless the free-glucosamine level is measured and controlled. The catalog specification is on the NAG product page; the COA page lists what is tested at release; the compliance page covers source and allergen paperwork. ### 02.1 NAG vs glucosamine: the acetyl group, the assay and the label URL: https://nutrition.rainwoodbio.com/products/specialty/n-acetyl-glucosamine/grades/nag-vs-glucosamine/ Reviewed: 2026-11-19 N-Acetyl glucosamine and glucosamine are different label ingredients, not two grades of one material. NAG carries an acetyl group on the nitrogen, which takes the molecular weight from 179.17 for glucosamine base to 221.21 and moves the specific rotation from the +70° range to the +40° range. The acetyl group also changes the assay analyte, the use level and the name that has to appear on the label. In one lineThe acetyl group adds 42 mass units to glucosamine, moves the specific rotation from the +70° range to the +40° range, and changes the label ingredient. ## The acetyl group in structural terms Glucosamine is a hexose with an amino group at carbon 2, one of the amino sugars. NAG keeps that backbone and adds an acetyl group to the nitrogen. The substitution is small in chemical terms and large in commercial terms, because it removes the free amino group, adds an amide, and creates a molecule with its own CAS number, its own rotation and its own name. N-Acetyl glucosamine against glucosamine hydrochloride | Property | N-Acetyl glucosamine | Glucosamine hydrochloride | CAS number | 7512-17-6 | 66-84-2 | Formula | C8H15NO6 | C6H14ClNO5 | Molecular weight | 221.21 | 215.63 | Acetyl group | One N-acetyl group | None | Specific rotation (dried basis) | +40.0° to +43.0° | +70.0° to +73.0° | Assay | 98.0–102.0% by HPLC as NAG | 98.0–102.0% on the dried basis as glucosamine | Label name | N-Acetyl glucosamine | Glucosamine hydrochloride The arithmetic of the substitution is worth stating once. Glucosamine base is 179.17; the acetyl group adds 42.04 mass units, which gives 221.21. The hydrochloride is a salt of the base at 215.63, so it is not the right comparison for the acetyl group, only for the commercial salt. NAG carries no counter-ion and is not a salt of glucosamine. ## Two assays, no conversion factor An NAG certificate and a glucosamine certificate can both read 98.0–102.0%, and that coincidence is the source of most confusion. The NAG figure is the NAG peak against an NAG standard; the glucosamine figure is the glucosamine peak against a glucosamine standard. They are different analytes, and there is no factor that converts one into the other. The 83.1% factor belongs to glucosamine hydrochloride: 179.17 ÷ 215.63 = 0.831, the share of the salt mass that is glucosamine base. NAG has no such factor because the acetyl group is part of the declared molecule. Multiplying an NAG assay by 0.831, or by any other number, does not produce a glucosamine figure; it produces a number that describes neither material. If a certificate describes an NAG lot as “glucosamine 98%”, the analyte name is wrong even when the assay is inside the range. The chromatogram should name the standard, the column and the wavelength, and the identity should be supported by IR and rotation. The HPLC method note describes the separation. ## Use level and dose arithmetic Use level is where the structural difference becomes a commercial one. A 1,000 mg label line of NAG declares 1,000 mg of N-acetyl glucosamine. The same 1,000 mg of glucosamine hydrochloride declares 1,000 mg of the salt, which supplies 831 mg of glucosamine base. The two products do not deliver the same substance, and a formulator cannot close the gap by increasing the NAG weight. If a label has to declare glucosamine, NAG is the wrong input. If the label declares N-acetyl glucosamine, the weigh-up uses the NAG assay and the NAG mass, and any overage decision is made on the NAG figure. The use level is set by the brand's label, the destination's rules and the finished-product testing; it is not derived from a glucosamine conversion. This is why a switch at equal mass is not a reformulation. It changes the ingredient on the label, the amount of the declared substance per serving and the market file that supports the claim. The change belongs in a written change control, not in a purchasing note. ## What the label has to say The label name should be written out: N-acetyl glucosamine, or N-acetyl-D-glucosamine. “NAG” alone is an abbreviation, and “glucosamine” is a different ingredient. In the EU, the food name and the ingredient list follow the food information rules; in the United States, the dietary ingredient is declared in the Supplement Facts box. The source statement follows the material: a shellfish-derived lot needs the crustacean shellfish declaration considered, and a fermentation-derived lot needs its own source statement. Market status is confirmed separately. Some markets have a product-specific entry for a defined NAG form; confirm the current text and its conditions. The buyer's regulatory team confirms the route, and the label is checked against that route before it is printed. No disease-related claim is made here. ## What changes on a switch A switch from glucosamine hydrochloride to NAG, or the reverse, changes the specification, the certificate, the assay name, the rotation range and the label. It also changes the stability question: NAG can hydrolyse to glucosamine at low pH or high temperature, so a process that was acceptable for the salt is not automatically acceptable for NAG. The finished-product testing and the claim review should be repeated. The sulfate form is a third option, with its own counter-ion and mass arithmetic. It is not a halfway house between NAG and the hydrochloride. Choose the form from the label and the market file first, then write the specification around it. The grades page covers the source and particle choices; the compliance page covers the documents. ## What to check on the documents Certificate lines that separate the two ingredients | Document line | N-Acetyl glucosamine | Glucosamine hydrochloride | Ingredient name | N-Acetyl glucosamine | Glucosamine hydrochloride | CAS number | 7512-17-6 | 66-84-2 | Assay analyte | NAG by HPLC | Glucosamine on the dried basis | Specific rotation | +40.0° to +43.0° dried basis | +70.0° to +73.0° dried basis | Loss on drying | ≤1.0% | ≤1.0% | Source statement | Shellfish or fermentation | Shellfish or fermentation Read the first three lines together. If the name says NAG and the assay says glucosamine, the certificate is internally inconsistent; if the name says glucosamine and the rotation is near +41°, the lot is not the hydrochloride. The rotation and the assay analyte are the two lines that expose a substitution, and the source statement decides the allergen file. Catalog ranges for the acetylated material sit on the NAG product page; the other substance has its own glucosamine product page. The COA page shows how each figure is reported; the identity page sets out the analytical evidence; the quality page describes the release workflow. ### 03 NAG stability: moisture, hydrolysis and the pack URL: https://nutrition.rainwoodbio.com/products/specialty/n-acetyl-glucosamine/stability/ Reviewed: 2026-11-19 N-Acetyl glucosamine is hygroscopic and hydrolysis-prone: a dry powder in a sealed pack holds its assay, while moisture, low pH and heat move it toward glucosamine. The catalog limits are loss on drying ≤1.0% and pH 3.5–5.0 for a 5% solution. Shelf life belongs to the pack, the storage condition and the finished formula, not to the certificate alone. In one lineMoisture, acid and heat are what move NAG toward glucosamine, so the sealed pack and the process hold time decide the shelf life. ## The powder: a tight moisture limit Loss on drying is capped at 1.0%, a tight release limit for a hygroscopic powder. That number is a gate at release, not an allowance for storage: once a 1 kg pouch has been opened and rolled shut, the barrier is gone and the powder will pick up water; a later test on the remainder describes a different material. Keep the original pouch closed, weigh quickly in a humid room, and do not leave a drum open overnight. Moisture shows up first as caking and then as a lower as-received assay. The dry-basis assay can stay inside the range while the powder as weighed contains less NAG, because water is not NAG. The colour can drift from white toward a dull cream as the powder picks up water and heat; colour alone is a weak signal, but a change from the retained sample is worth investigating. For long storage, move the remainder into a smaller moisture-barrier container instead of relying on a folded pouch. A desiccant can help in a humid climate, but it does not replace a seal. If the pack has been stored cold, let it reach room temperature while still closed, so that moisture does not condense on it. ## The solution: where hydrolysis happens NAG dissolves in water and the 5% solution sits at pH 3.5–5.0. That acidity is mild, but it is not inert. The acetyl group can be hydrolysed at low pH or high temperature, and the product of that hydrolysis is glucosamine. A warm hold, a hot-fill step or a long tank stand gives the reaction time, and the NAG assay of the liquid falls while the free-glucosamine level rises. A liquid process therefore needs its own stability work, not the powder's result. Keep the hold cool and short, validate the hold time at the process pH and temperature, and test both NAG and free glucosamine at the end of the hold. Adjusting the pH may slow the hydrolysis but changes the taste, the buffer load and possibly the colour, so the adjustment is a formulation decision with its own data. A clear bottle on a warm bench is the wrong container for a hold even when the pH looks acceptable. ## What drives degradation Factors that move N-acetyl glucosamine during storage | Factor | What it does | Control | Moisture | Water content rises, the as-received assay falls and the powder cakes | Foil pouch kept sealed; dry weighing room; desiccant in humid stores | Heat | Accelerates hydrolysis and colour change | Controlled store; cool process; short holds | Acidity | Low pH drives hydrolysis to glucosamine | Validate the matrix pH; avoid unnecessary acid | Time in solution | Longer hold means more hydrolysis | Define and validate the hold time | Water activity in the blend | Moisture transfer from excipients | Dry excipients; check the blend at release and on storage | Pack integrity | A pinhole or a poor seal admits moisture | Seal integrity; lot code matched across pack and liner These factors combine. A warm, humid store is worse than warmth or humidity on its own, and a warm acidic solution combines heat, acidity and time in the same vessel. The useful question is not whether NAG is stable, but which pack, which humidity and how long, and what free-glucosamine level the lot reaches. ## A stability protocol for the ingredient Before any protocol is written, four choices must be made: which pack, which storage condition, which sampling points and which tests. The standard design uses 25 °C/60% relative humidity for the long-term arm, 30 °C/65% for the intermediate arm, and 40 °C/75% for the accelerated arm that stresses the pack. The exact pack must be identified, because a 25 kg fiber drum and a 1 kg foil pouch differ in headspace and in how often they are opened. Test assay, loss on drying, pH, specific rotation, appearance, free glucosamine and microbiology at each point. Rotation deserves a place in the panel because it is a dried-basis identity figure that moves if the molecule changes. For a liquid or a stick pack, add an arm in the matrix at the process pH and heat load, and test free glucosamine as well as NAG. The report should list each result rather than a bare pass, and name the lot family and the pack. Request the stability summary for the exact pack in the quotation. A summary written for a different pack in the same family does not describe the barrier you will receive. ## The finished formula changes the answer Capsules and tablets keep water activity low, but the fill can still pick up moisture from the excipients or the shell. Test moisture at release and repeat the measurement after storage, and watch the fill for caking or colour change. For a stick pack, the foil and its seals are the barrier; a pinhole means the strip has failed, so inspect the seals rather than the powder alone. A drink brings acidity, heat and time together, which is the combination that hydrolyses NAG. Bulk-powder data is the starting point only. Wet granulation adds water and heat to a hygroscopic powder; if the process uses it, the granulate needs its own assay, moisture and free-glucosamine results. An overage is a label and stability decision and cannot compensate for a pack that admits moisture. ## Assigning the retest period No shelf-life figure can be applied to NAG across all packs. The retest period is assigned for a defined pack and storage condition, and it rests on the stability file for that combination. A number quoted without those qualifications is not a shelf life. At the end of the retest period, any extension depends on re-assaying the retained sample. An extension is not assumed, and a bulk result is not carried over to a repacked container. Standard packs are shown on the NAG product page; release tests are on the COA page; pack sizes and lead time are covered on the MOQ page; the assay is described in the HPLC note; the quality page sets out how lots are released. ### 04 NAG: MOQ, packs and the information a quotation needs URL: https://nutrition.rainwoodbio.com/products/specialty/n-acetyl-glucosamine/moq/ Reviewed: 2026-11-19 The smallest N-acetyl glucosamine order is a 1 kg foil pouch; production quantities ship in a 25 kg fiber drum, and the standard pack is quoted at 1–7 days. A usable quotation names the source (shellfish or fermentation), the assay and its basis, the quantity and pack, the destination and Incoterm, the documents, and the country of sale for the finished product. In one lineQualification happens in the 1 kg pouch; the 25 kg drum is the same material once the specification is fixed. ## Why the minimum is 1 kg One kilogram is enough to run a bench trial, keep a retention sample and send a portion to an outside laboratory, all from a single lot-coded pack. It also travels as a parcel, which suits a project that has not yet fixed its production plan. Below that weight the material normally comes from a larger lot that has been split and repacked; the split adds handling and weakens the link between the certificate and the bag. The drum is a different trade-off, not a different product: less handling per kilogram, more inventory at once, and a longer period during which a hygroscopic powder sits in a partly used container. NAG picks up moisture, so a drum left open in a humid room is a quality risk as much as a storage problem. ## Packs and formats Pack options for N-acetyl glucosamine | Pack | Net weight | What it suits | Practical note | Foil pouch | 1 kg | Trials, samples, small batches | Resealable; keep the seal clean and dry | Fiber drum | 25 kg | Production | Lined drum; record the date it is opened | Granulated powder | On request | Tableting and stick-pack lines | Flow changes; composition may change too The standard powder passes 40 mesh at ≥95%. A granulate is a separate specification: the particle-size line changes, and if the granulate contains a binder or carrier, the assay per gram and the label change as well. Raise the request before the quotation so the specification and the lead time are quoted together. ## Lead time and dispatch For the standard pack, allow 1–7 days from confirmation. That covers picking, paperwork and dispatch; transit, customs and the customer's own release sit outside the window. A granulate or a non-standard pack takes longer, and the extra time should appear on the quotation rather than in a later email. Ask for a dispatch date as well as a lead time. A drum usually moves on a pallet and a pouch as a parcel, and the Incoterm allocates freight booking and customs clearance. Documents should leave with the lot; a certificate that arrives after the powder delays the release. ## What a quotation needs A quotation becomes comparable when it covers six points: - Name the substance and its source: N-acetyl glucosamine, CAS 7512-17-6, shellfish-derived or fermented. - Attach the specification you want quoted: assay and basis, rotation, moisture, pH, mesh, metals, microbiology. - Order size and pack: 1 kg pouch, 25 kg drum, or granulate on request. - Give the delivery address and the Incoterm, so freight and customs responsibility are clear. - List the certificates and statements the importer must hold: COA, specification, SDS, source and allergen papers, destination declarations. - Describe the end use and the country of sale, because both shape the documents and the label. Source and allergen paperwork change what the importer must hold, so they belong in the offer rather than in a follow-up. The same applies to the assay basis: a quotation that leaves it out cannot be compared with one that states it. Commercial terms are not published here; they are set out in the quotation. ## A sample that cannot be traced is not a qualification The 1 kg pack doubles as the qualification sample. Before scaling, check IR and HPLC identity, rotation, assay, loss on drying and microbiology, and keep a portion from the same pack as the retained sample. The lot code should run through the pack, the COA and the quotation; if it does not, the material is a demonstration rather than a qualified lot. Below 1 kg, a bench quantity is a repack rather than the catalog pack. It can be arranged, but it should be documented as a split with its own traceability. A bench sample and a production drum are not automatically from one lot. ## Commercial and quality terms before the first order Commercial terms sit on the quotation: Incoterm, pack, lead time and documents. Quality terms belong next to them: which specification revision applies, how each lot is certified, how the retained sample is kept, when the material is re-tested, and how a change of source or process is notified. Agreeing those points before the first production order is easier than resolving them after a dispute. If a lot fails the agreed specification, the retained sample and a joint re-test decide the outcome. A photograph of the powder is not a referee method. Settle in advance which laboratory both sides accept and who arranges and funds the referee test. Catalog ranges are on the NAG product page; the release tests are listed on the COA page; the source and allergen file is described on the compliance page; the MOQ glossary entry defines the term; shipping documents are covered on the logistics page. ### 05 The regulatory file for N-acetyl glucosamine URL: https://nutrition.rainwoodbio.com/products/specialty/n-acetyl-glucosamine/compliance/ Reviewed: 2026-11-19 N-Acetyl glucosamine is supplied as N-acetyl-D-glucosamine, CAS 7512-17-6. The catalog specification describes the powder; the regulatory file describes the route, the limits and the label that apply where the product will be sold. Whether a market requires a novel-food authorisation, a supplement notification or another basis is a determination for the buyer's regulatory team, and it should be settled before the label is written. This page lists the questions and documents that file has to answer. In one lineThe specification describes the powder, the destination decides the route, and the buyer's regulatory team confirms whether NAG needs a novel-food entry, a supplement notification or another basis. ## What the file has to answer The file answers four questions, and each one needs a different document. What is the substance, and which version of the specification is being purchased? Which lot is being released, and what did its certificate measure? Which route and labelling rules apply in the destination, and to the finished product rather than the drum? And what happens to the file if the source, process or pack changes? The certificate speaks to the lot, the technical data sheet to the specification, the safety data sheet to handling; none of the three establishes the route. The file also needs the source declaration, the allergen statement, the GMO statement, the origin file, the residual-solvent declaration and any customer-specific statement. A missing document is easier to fix before the order than at the port, so list what is present and what is still outstanding. Keep the list versioned: a folder of undated PDFs is hard to audit. The framework summary below reflects this review, and the current legal text governs. ## European Union The EU file starts with the material and works outward to the label. General food law, the food information rules and the nutrition and health claims rules apply in addition to any product-specific route. Whether NAG falls under the novel-food regime, or is covered by an existing entry, turns on the source, the specification and the date of the assessment. Some markets have a product-specific entry for a defined NAG form; confirm the current text and its conditions. The buyer's regulatory team confirms the route for the member state concerned and keeps the evidence with the order. Labelling is reviewed separately. A shellfish-derived lot brings the crustacean shellfish allergen into the finished-product assessment; a fermentation-derived lot brings a different source statement but not an automatic exemption from the allergen review of the whole formula. The declared ingredient should read N-acetyl glucosamine, not glucosamine. ## United States On the US market, a dietary ingredient is sold under the dietary-supplement framework. Whether this substance is an old dietary ingredient or needs a new dietary ingredient notification is for the buyer's regulatory team to decide; this page asserts neither status. The supplier supplies the identity, source, specification and safety material that the file or a notification would use, and the buyer checks that the basis extends to the finished product and to the claim. The Supplement Facts panel declares the dietary ingredient, and the abbreviation “NAG” is not enough on its own; the full name should appear. For a shellfish-derived lot, the crustacean shellfish declaration is considered under the US allergen rules. A conventional-food use follows a different route, and nothing here implies a food-additive or GRAS basis. ## Contaminants and limits The limits in the catalog apply to the ingredient. The finished-product figure depends on the dose and on the destination's maximum levels, so the file should show the calculation as well as the lot result. The table is a starting point, not a substitute for the current text. Catalog limits and the evidence the file should hold | Parameter | Catalog limit | What the file should show | Lead (Pb) | ≤3 mg/kg | The numeric result, the method, and the arithmetic at the finished dose | Arsenic (As) | ≤2 mg/kg | The result and the method | Cadmium (Cd) | ≤1 mg/kg | The result and any category exception | Mercury (Hg) | ≤0.1 mg/kg | The result and the method | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Colony count plus the absence result | Free glucosamine | No catalog limit | Only if agreed: a limit and its method ## Label and claims No disease-related claim is made on this page. The label declares the material and its quantity in the form the destination requires, and the claim review follows separately: the brand's reviewer checks that the wording fits the product, the form and the market. A certificate does not authorise a claim, and a claim does not amend the specification. The ingredient name is part of that review. Describing NAG as glucosamine, or expressing a NAG dose as a glucosamine figure, misnames the substance and creates a labelling defect that no certificate can fix. Where a destination has a product-specific entry for NAG, the label and the conditions of use must match it as well as the general labelling rules. ## Documents in the file - Specification document: revision number, CAS 7512-17-6, source and mesh. - Lot certificate covering assay, rotation, moisture, pH, metals and microbiology. - Technical data sheet, plus the safety data sheet for handling. - Source and allergen file: shellfish species and origin, or the fermentation route and its processing aids. - GMO position, country of origin and residual-solvent statement. - Stability summary for the pack being quoted. - Free-glucosamine result where a limit has been agreed. - Change-control record for source, process and pack. ## Checklist before the first order - Check that the specification carries a version date, the CAS number 7512-17-6 and the shellfish or fermentation source. - Confirm the pack contains the lot COA, the TDS and SDS, the source and allergen declarations, GMO and origin records and the residual-solvent statement. - Recalculate the lead, arsenic, cadmium and mercury results for the actual daily dose of the finished product. - Confirm that the label names N-acetyl glucosamine and that no claim outruns the destination's rules. - Keep the buyer's written route confirmation with the purchase order. - Record any change of source, process or pack before the next lot ships. Catalog ranges are published on the NAG product page. For the lot document see the COA page; for the analytical evidence the identity page; for the separate glucosamine ingredient, its own product page. The EU regulatory note gives the framework references; the quality page explains how the release file is assembled. ### 06 How we prove a lot is N-acetyl glucosamine URL: https://nutrition.rainwoodbio.com/products/specialty/n-acetyl-glucosamine/identity/ Reviewed: 2026-11-19 An N-acetyl glucosamine lot is confirmed when the IR and HPLC identity match the reference, the specific rotation is +40.0° to +43.0° on the dried basis, the assay is 98.0–102.0% by HPLC, and the loss on drying closes the mass balance. The rotation is the line that separates NAG from glucosamine hydrochloride, which rotates at +70.0° to +73.0°. An assay percentage on its own does not prove which amino sugar is in the pack. In one lineNo single number identifies NAG: the IR and HPLC results name the molecule, the rotation excludes glucosamine, and the moisture figure accounts for the rest of the powder. ## The identity layers A correct name on a certificate is a claim, not a measurement. Each of the five checks below answers a different question and needs its own evidence; the first line alone only shows that the paperwork exists. Five checks behind an N-acetyl glucosamine identity | Check | Question | Method | Evidence supplied | Document | Does the certificate give the CAS number and the source? | Certificate and specification | That the paperwork exists | Infrared | Does the spectrum show the amide and hydroxyl pattern of NAG? | IR against a reference spectrum | The functional groups | Chromatography | Is the main peak NAG, and how pure is it? | HPLC retention and peak purity | The molecule and its related substances | Polarimetry | Is it the D-form, and is it NAG rather than glucosamine? | Specific rotation on the dried substance | Optical form and structural family | Mass balance | Has the powder been diluted? | Assay, loss on drying, impurities | Whether the numbers agree ## The rotation and the peak ratio The specific rotation is a dried-basis figure, and it is the most useful single check against a glucosamine substitution. NAG rotates at +40.0° to +43.0°; glucosamine hydrochloride rotates at +70.0° to +73.0°. A lot that is mostly glucosamine cannot sit inside the NAG range, and a blend of the two lands between them in proportion to the mixture. The sample must be dried and the basis stated, because residual water pulls the angle down. Two amino sugars on the identity lines | Property | N-Acetyl glucosamine | Glucosamine hydrochloride | CAS number | 7512-17-6 | 66-84-2 | Molecular weight | 221.21 | 215.63 | Specific rotation (dried basis) | +40.0° to +43.0° | +70.0° to +73.0° | Acetyl group | One N-acetyl group, about 19.5% of the molecular mass | None | Assay | 98.0–102.0% by HPLC as NAG | 98.0–102.0% on the dried basis as glucosamine The formula supports the same conclusion. NAG has one nitrogen in a molecule of 221.21, which is 6.33% nitrogen by mass; the acetyl group accounts for about 19.5% of the mass. Those figures are not routine certificate lines, but they explain why an IR spectrum shows an amide band that glucosamine does not have, and why the two molecules behave differently on a reversed-phase column. Where the HPLC method resolves NAG and glucosamine, the ratio between the two peak areas is the hydrolysis check: a fresh lot should show one dominant NAG peak, and a lot that was held warm or acidic shows a glucosamine peak alongside it. If the method does not resolve them, the ratio cannot be read from that chromatogram and a separate method is needed. The pH of a 5% solution, 3.5–5.0, is a supporting check on the material, not an identity test on its own. ## X-ray diffraction and the solid state X-ray diffraction asks whether the solid is crystalline and whether the pattern matches a reference. A crystalline NAG gives sharp reflections; an amorphous diluent gives a broad halo, so the technique is a useful check against a blended or spray-dried powder. It says nothing about the acetyl group, and it is not a purity assay. Before accepting a match, request the reference diffractogram and the method's detection limit. For a contested lot, diffraction is strongest when it is read with rotation, IR and HPLC. It is not a routine release test here, and a certificate that says only “XRD conforms” gives the reader no pattern to compare. The method earns its place when the question is solid form or dilution, not when the question is assay. The XRD note describes sample preparation. ## What adulteration looks like Common substitutions and their tell-tale results | Substitute | Effect on the lot | Tell-tale result | Confirm by | Glucosamine hydrochloride | A white powder with the same sugar backbone | Rotation above the window; no amide band | Polarimetry, IR, HPLC | Glucosamine sulfate | Brings sulfate and a counter-ion into the powder | High rotation; sulfate or ash found | Polarimetry, ion analysis, HPLC | Maltodextrin or dextrose | Reduces the NAG content per gram | Low assay, low rotation, mass balance adrift | Assay, rotation, loss on drying | Water | Water content climbs, so the as-received assay drops | Loss on drying above 1.0% | Loss on drying | N-Acetyl galactosamine | An epimer: identical formula and mass, one carbon inverted | A shoulder or co-elution; IR nearly identical | HPLC on a resolving column, NMR Colour is the weakest signal. A dilution can be made white to off-white, so colour proves little. The rotation, the amide band, the chromatographic purity and the mass balance carry the argument. Appearance and assay alone would miss a glucosamine substitution; without a rotation result, the most probable adulterant goes untested. ## Identity clauses for the specification - Name: N-acetyl-D-glucosamine; CAS 7512-17-6; C8H15NO6; molecular weight 221.21. - IR spectrum and HPLC retention both match the reference. - Optical rotation: +40.0° to +43.0° after drying. - Assay by HPLC: 98.0–102.0%, basis declared. - Loss on drying ≤1.0%; pH 3.5–5.0 in 5% solution. - Origin: shellfish or fermentation, declared on the certificate, with the allergen declaration. - Free glucosamine: a limit and method only where the file requires them. - Mesh: at least 95% passing 40 mesh, unless a granulate is agreed. ## Five requests for the supplier - State the source of this lot, with the species record or the fermentation description. - The IR spectrum and the HPLC chromatogram should be attached to the certificate; the assay number alone is not enough. - Give the rotation result with its temperature and the basis on which it was measured. - State whether the assay is on a dry or as-received basis, and supply the matching moisture result. - Provide a free-glucosamine figure if hydrolysis is a concern, and agree a joint re-test on the retained sample in advance. Five answers of that kind make an identity file; one assay figure does not. Catalog ranges are on the NAG product page; the COA page shows where each result sits; the grades page compares sources; the level-four page explains the label consequences; the HPLC note covers the separation; the quality page describes the release file. ### 01 What the COA for β-NAD actually contains URL: https://nutrition.rainwoodbio.com/products/specialty/nad/coa/ Reviewed: 2026-11-19 Seven release parameters sit on a β-NAD certificate: appearance, HPLC/UV identification, assay, Karl Fischer water, pH of a 1% solution, the heavy-metal panel and microbiology. Only identification and assay describe the molecule itself; water and pH describe the condition of the powder around it. A buyer who reads only the assay percentage is missing the two numbers that decide what that percentage means. In one lineA β-NAD certificate is only complete when the assay carries its basis and wavelength, and the Karl Fischer water sits beside it. ## What each line has to show Each line should let a reviewer reconstruct the release decision: what was measured, how, against which limit, and what the lot actually gave. “Conforms” alone is a verdict without a record behind it. Identification and assay are separate claims. Identification says the peak is the β-linked dinucleotide. Assay says how much of it the lot contains. A certificate that reports one and implies the other has left a gap. Identity, assay, water and contaminants · β-NAD | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | HPLC retention and UV spectrum | Matches the reference standard | Assay | HPLC | ≥95.0% | Water | Karl Fischer titration | ≤5.0% | pH (1% solution) | pH meter | 2.0–4.0 | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent The UV spectrum is what turns a retention time into an identification. The assay is a number whose meaning depends on two footnotes: the basis it is reported on and the wavelength that produced it. ## As-is, anhydrous and the detection wavelength The assay percentage needs a denominator. On the anhydrous basis, the laboratory divides the measured amount by the dry matter; as-is, it reports the powder as weighed. Take a lot at 95.0% as-is with 4.0% water: the anhydrous figure is about 99.0%. Take a lot at 95.0% anhydrous with the full 5.0% water: as-is it is about 90.3%. Karl Fischer is the water-specific test. Loss on drying would also count residual solvent, which matters for a hygroscopic nucleotide that may carry solvent from its isolation. The catalog limit is water ≤5.0% by Karl Fischer, and the measured number should be printed rather than summarised as “pass”. Detection wavelength is the other footnote. NAD+ has its maximum near 259 nm; NADH adds a band at 340 nm. A 260 nm channel with no separation between the two forms measures both together. The chromatogram should show that the oxidation states elute apart. ## Limit, result and the space between them A limit is a gate; a result is an observation. Put them in different columns and name the method above them. A result column that repeats the specification range tells the reader nothing about the lot. How each release line should be reported | Parameter | Release limit | Result column | Assay | ≥95.0% | A measured percentage, with the basis and the wavelength | Water | ≤5.0% | A measured percentage by Karl Fischer | pH | 2.0–4.0 at 1% | The measured pH and the solution concentration | Heavy metals | Per element | Each element reported separately in mg/kg | Microbiology | Counts and absence | Plate count plus the absence statement for the lot Reconstruct the decision: assay with basis and wavelength, water beside it, each metal separately, and a count plus an absence statement for micro. A summed heavy-metal figure conceals which element drove the total. ## Batch-to-batch movement Lots move for process reasons. The conversion route and the purification change colour and assay; the drying step changes water; the isolation and neutralisation change pH. White to off-white is a broad window, so a slight shade difference is not automatically a defect. A yellow cast, dark particles or patchy colour deserve the batch record. Water is the variable most exposed to the warehouse. It rises when a pouch is left open, and the as-is assay falls in step. A pH at the edge of 2.0–4.0 can mean residual acid from the isolation step or a different neutralisation. One result near a limit is less informative than a trend. Match the certificate lot code to the pouch, the drum and the retained sample before treating the paper as evidence about the pack in front of you. ## When the supplier certificate is not enough Outside testing earns its place at a new source, a first regulated shipment, a disputed oxidation state, or a label statement the supplier's certificate does not support. Ask for a focused panel: HPLC/UV at 260 and 340 nm, Karl Fischer water, pH, ICP-MS metals and the micro set. The 340 nm channel is the oxidation-state check. A β-NAD lot with a distinct 340 nm band contains NADH. If the structure itself is contested, NMR or high-resolution mass spectrometry comes next. An enzymatic assay measures coenzyme activity, which is a different question from peak area. Insist on a detection limit for every screen and on a documented chain of custody. “Not detected” without a limit says something about the method, not the lot. ## Six lines for a supplier comparison Ask six questions of every supplier: form and CAS; assay with basis and wavelength; water by Karl Fischer; pH; chromatographic and spectral evidence; and contaminants, micro, pack and lot code. Two offers that both say 95% can still describe different powders. Traceability is the second layer: who manufactured the lot, which route was used, and how it was dried and milled. The catalog specification is on the NAD+ product page. The oxidation-state tests are on the identity page; market questions are on the compliance page; the separation itself is covered by the HPLC method note, and the quality page shows how a lot is released. ### 02 NAD+ grades: powder, granulate and the oxidation state URL: https://nutrition.rainwoodbio.com/products/specialty/nad/grades/ Reviewed: 2026-11-19 There is one catalog chemical grade of β-NAD, two physical presentations and one lookalike material that is often mistaken for a grade. The grade is β-nicotinamide adenine dinucleotide, CAS 53-84-9, with an assay of ≥95.0% by HPLC; the presentations are powder and granulate; the lookalike is NADH, CAS 606-68-8, the reduced oxidation state. An order that names only “NAD” has not chosen among them. In one lineThe grade is the form plus the presentation: NAD+ or NADH decides the chemistry, and powder or granulate decides how it flows, not what it is. ## One grade, two packs, one lookalike Start with the oxidation state, because it is the choice that changes the molecule. NAD+ is oxidised; NADH is reduced. They carry different CAS numbers, different UV behaviour and different stability risks. NADH is not a higher grade of NAD+ and cannot be used gram for gram in its place. The level-four comparison sets out the chemistry. Within the oxidised form, the catalog has one assay specification. Powder and granulate share it. Granulation changes particle size, flow and dust; it does not change identity or assay. A granulated lot is a legitimate production variant, but it is a specification change with its own particle-size line. ## The catalog powder, a granulate and NADH Three columns, two questions. The first two answer “which pack?”; the third answers “which molecule?”. β-NAD powder, granulated β-NAD and NADH | Property | β-NAD powder (catalog) | β-NAD granulated | NADH | CAS number | 53-84-9 | 53-84-9 | 606-68-8 | Oxidation state | Oxidised | Oxidised | Reduced | Assay | ≥95.0% by HPLC | Same assay limit | Separate method and limit | Water | ≤5.0% by Karl Fischer | Same water limit | Separate limit | pH (1% solution) | 2.0–4.0 | Same pH limit | Separate limit | Particle and flow | Fine powder | Larger particles, freer flow | Not a β-NAD presentation | Typical format | Capsules, sticks, mixes | High-speed filling, dust control | Separate project Read the third column as a different product. Its certificate carries its own method and limits; the β-NAD numbers do not transfer. A quotation that lists “NAD” and “NADH” without CAS numbers has not settled the molecule. ## Powder, water and the granulate The catalog powder is white to off-white and dissolves freely in water to an acidic solution. It is hygroscopic: exposed to humid air it gains water, the Karl Fischer figure rises and the as-is assay falls. Heat speeds the damage, and keeping it in solution is the least durable option. Granulation buys flow and less dust. It does not buy moisture protection. A granulate still needs a sealed pack, and it needs a particle-size specification and a dispersion check that the powder specification does not contain. ## Which presentation fits the dosage form A capsule or tablet takes the powder as supplied. A granulate feeds more easily on a high-speed press and keeps the filling room cleaner. A stick or drink mix uses the powder because it dissolves, but the drink introduces water at the start; the formulator has to validate pH, heat load and hold time. The weigh-up depends on the assay basis. At 95.0% as-is, 100 mg declared needs 105.3 mg of powder. If the assay is anhydrous, restore the water first. Declared mass, assay basis and water belong on the same batch-record line. ## Specification text for β-NAD Write it so that two laboratories would report the same numbers: - “β-Nicotinamide adenine dinucleotide (NAD+), CAS 53-84-9, C21H27N7O14P2, molecular weight 663.43.” - “Assay ≥95.0% by HPLC; state as-is or anhydrous, and name the detection wavelength.” - “Water ≤5.0% by Karl Fischer; pH 2.0–4.0 in a 1% solution.” - “White to off-white powder; identification by HPLC retention and UV spectrum.” - “Heavy metals and microbiology as listed; each element reported separately.” - “Presentation: powder or granulated; the granulate carries its own particle-size line.” - “Oxidation state, destination market and finished-product form confirmed before the order.” We supply β-NAD powder; granulate is quoted on request. NADH is a separate purchase with its own assay, certificate and label, and it should not replace NAD+ without written change control. ## Where the choice goes wrong Granulate is the wrong choice for a bench trial that needs a fine, fast-dispersing powder, and it is the wrong choice when the filling line has not been qualified for larger particles. NADH is the wrong choice whenever the label, the specification or the market file names the oxidised form. Equally, a project built around NADH should not accept β-NAD as “close enough” and correct the dose later. The oxidation state is part of the identity. NAD+ is also not NMN or nicotinamide riboside: those are different molecules with their own specifications, and the NMN page and the nicotinamide riboside page describe them separately. The product hub holds the catalog values; the COA page records the form at release; the stability page covers the pack and the solution; the quality page describes the release file. ### 02.1 NAD+ vs NADH: oxidation state, assay and stability URL: https://nutrition.rainwoodbio.com/products/specialty/nad/grades/nad-vs-nadh/ Reviewed: 2026-11-19 NAD+ and NADH are the oxidised and reduced forms of the same coenzyme pair: NAD+ carries an aromatic pyridinium ring, NADH a 1,4-dihydropyridine ring, and the two interconvert by two electrons and a proton. They are separate materials with separate CAS numbers — 53-84-9 and 606-68-8 — and separate assays and specifications. A purchase order or a label that says only “NAD” has not named the ingredient. In one lineNAD+ and NADH are one hydride apart, and that one step changes the CAS number, the wavelength the assay reads and what the powder does in air and water. ## The difference is one hydride The change sits on the nicotinamide ring. In NAD+ the ring is a pyridinium cation; in NADH the same ring is a 1,4-dihydropyridine. The pair interconverts by two electrons and one proton, which is the hydride transfer that dehydrogenase enzymes catalyse. Everything else in the molecule — the adenine, the two riboses and the pyrophosphate bridge — is unchanged. A two-electron change is enough to create a separate material with its own CAS number and certificate. The oxidised free acid has a molecular weight of 663.43; the reduced free acid is about two mass units heavier. Commercial NADH is usually supplied as a salt, so its CAS number, formula and molecular weight belong to the form named on its own certificate, not to a generic “NADH” label. ## NAD+ and NADH side by side Oxidised and reduced β-NAD | Property | NAD+ | NADH | CAS number | 53-84-9 | 606-68-8 | Oxidation state | Oxidised | Reduced | Nicotinamide ring | Pyridinium | 1,4-Dihydropyridine | Ultraviolet bands | About 259 nm; no 340 nm band | About 259 nm and 340 nm | Usual assay wavelength | 260 nm | 340 nm, or 260 and 340 nm | Catalog assay | ≥95.0% by HPLC | Separate specification | Water and pH | ≤5.0% Karl Fischer; pH 2.0–4.0 at 1% | Separate specification | Main solution risk | Hydrolysis, driven by heat and pH | Oxidation back to NAD+ The table is not a conversion chart. It separates two materials that share a name stem and a biological role, and it shows why a single “NAD” line on a purchase order or a label is incomplete. ## The wavelength decides what is counted NAD+ is read at about 259–260 nm; NADH has the same 259 nm band plus a 340 nm band, where only the reduced ring absorbs. An HPLC method for NAD+ therefore uses 260 nm, and a method for NADH uses 340 nm or a dual-wavelength arrangement. A 260 nm method that does not separate the two forms reports the sum of both, so a lot can pass a ≥95.0% assay while carrying NADH. A reader needs the column and mobile phase, the detection wavelength and the reference standard; the chromatogram should show the separation. The assay basis — as-is or anhydrous — is a second, independent statement that belongs beside the percentage, because water moves the as-is figure without changing the chemistry. An enzymatic assay answers a different question: it measures coenzyme activity in a dehydrogenase reaction rather than ultraviolet peak area. It can be useful when the question is activity rather than peak purity, but it does not replace the identity evidence and it does not assign a specification on its own. ## Stability follows the oxidation state NAD+ is hygroscopic and heat-sensitive; in water it hydrolyses, and the rate rises with temperature, while a move toward neutral or alkaline pH usually increases it. The catalog's 1% solution is acidic at pH 2.0–4.0, which is a handling clue rather than a licence to hold a neutral or alkaline solution. The dry powder, sealed and cool, is the format with the longest working life. NADH has its own failure mode. In solution it is oxidised back to NAD+ by dissolved oxygen, and trace metal ions and light accelerate the reaction. An NADH solution open to air therefore drifts toward the oxidised form; an NAD+ solution does not become NADH without a reductant. Both forms are hygroscopic solids, so the pack matters on both sides. The two forms should not share a stability conclusion. A study run on the oxidised powder does not cover the reduced form, and a study run in one matrix does not cover another. The stability page describes the study design in more detail. ## What the label and the file have to say The label has to name the form. “β-Nicotinamide adenine dinucleotide (NAD+)” and “reduced β-nicotinamide adenine dinucleotide (NADH)” are different ingredient names; “NAD” alone is ambiguous and leaves the reviewer to guess which oxidation state was weighed. The finished-product dose and the assay basis should be stated in the units the specification uses. A market file written around one form does not automatically cover the other. The buyer's regulatory team confirms the route for the destination and checks that the form on the label is the form the file covers. This page does not assert an authorisation for either form in any market. ## When to choose which form Choose NAD+ when the specification, the label and the market file name the oxidised form and the format is dry. It is the form in the catalog here: white to off-white powder with an assay of ≥95.0% by HPLC, water ≤5.0% and pH 2.0–4.0. Choose NADH only when the formula and the file name the reduced form, and buy it against its own certificate with its own assay method. Do not switch forms to chase an assay number, to match a quotation that is already on the table, or to make a label conversion easier. A switch changes the CAS number, the UV method, the stability risks and the regulatory citation at the same time. If a switch is required, write it as a change control with a new specification, a new certificate and a new label review. NAD+ is also not NMN or nicotinamide riboside. Those are different molecules with different molecular weights and their own specifications; the NMN page and the nicotinamide riboside page describe them. Catalog values sit on the product hub. The grades page puts the two forms in the context of pack choice, the COA page lists what a lot is released against, and the quality page explains the release file. ### 03 β-NAD stability: hygroscopic powder, degrading solution URL: https://nutrition.rainwoodbio.com/products/specialty/nad/stability/ Reviewed: 2026-11-19 β-NAD presents two separate keeping problems. The solid is hygroscopic: it takes water from the air, and the as-is assay falls before any bond breaks. The dissolved molecule is hydrolytically unstable: water, heat and pH shorten its life, and a drink is the least forgiving format. The powder in a sealed foil pack therefore has the longest working life, and shelf life has to be assigned to that pack and its storage condition. In one lineThe solid fails by taking up water; the solution fails by hydrolysing; the pack and the storage condition decide how much time you get. ## The solid: water uptake before chemistry The Karl Fischer figure is the first thing to watch. The catalog allows ≤5.0%, but that is a release limit, not permission to keep the pouch open. A pouch that has been opened and folded shut is not sealed; its headspace exchanges with the room, and the next water test will show the result. Caking and loss of flow follow. Heat accelerates the same decline. Ordinary warehouse temperatures are usually tolerable in a sealed pack; a hot loading bay, a parked car or a shelf above a heater is not. If a pack has been cold, let it reach room temperature before opening, or condensation will form on the powder. Colour is a weak but useful indicator. White to off-white is the catalog description. A yellow tint or dark specks after storage is a reason to re-test, not a reason to argue from a photograph. ## The solution: hydrolysis with a pH dependence Dissolved NAD+ hydrolyses, and the rate rises with temperature. pH is the second lever: the catalog's 1% solution is acidic at 2.0–4.0, and moving a formula toward neutral or alkaline usually shortens the hold time. A pasteurisation or hot-fill step adds a stress that a powder stick never sees. NADH in solution has the opposite problem: oxygen oxidises it back to NAD+. Trace metals and light accelerate that oxidation, so a reduced-form liquid needs a deoxygenated, protected process and its own hold-time data. If a liquid is the only option, manage light, pH and dissolved oxygen, then measure the hold time in the real matrix. Powder data cannot be borrowed for a beverage. ## Six drivers of loss Factors that move β-NAD during storage | Driver | Failure mode | Control | Water | Hygroscopic gain; as-is assay falls; caking | Sealed foil; desiccant if needed | Heat | Faster hydrolysis; faster moisture damage | Cool storage; no hot hold | pH | Hydrolysis rate in solution | Validate the matrix pH | Oxygen | NADH oxidised to NAD+ | Low headspace; deoxygenation | Light | Degradation at exposed surfaces | Opaque pack; dark store | Trace metals | Catalysis of NADH oxidation | Avoid iron and copper contact These drivers reinforce one another. A warm, wet, brightly lit store compounds the damage rather than adding three separate penalties; a neutral solution in clear glass exposes the material to most of them at once. Stability is a property of a pack, a condition and a time, not of the molecule alone. ## Designing the study Build the study around the pack and the matrix that will be sold. For bulk powder, use 25 °C/60% relative humidity and 30 °C/65% relative humidity for the long-term and intermediate points, and 40 °C/75% relative humidity for the accelerated arm. Add a light-exposure arm; a dark incubator cannot see a photolytic pathway. At each point measure assay, Karl Fischer water, pH, appearance, UV identity and microbiology. For NADH, add a 340 nm reading so that the oxidation state is measured rather than assumed. For a stick or a drink, repeat the panel in the matrix and at the process heat load. Give the individual results rather than a single verdict, and name the pack and the lots covered. A study on a different pack does not answer the question for the pack being purchased. ## How the dosage form changes exposure Capsules and tablets limit water activity but do not stop moisture transfer from the shell or the excipients. Test water and appearance at release and again after storage. A stick pack adds a seal to the problem: inspect the strip for pinholes, because the foil is the barrier. A beverage exposes the molecule to water, pH, oxygen, heat and light at once. Bulk data cannot answer the beverage question on its own. An overage is a formulation choice; it does not fix a leaking pack. ## Assigning a retest period There is no universal shelf-life figure for β-NAD. The retest period is a property of the pack, the storage condition and the test panel, and it should be written into the specification with that support behind it. At the end of the retest period, test the retained sample again before extending use. Do not extend by default, and do not apply a drum figure to a repacked pouch. Pack sizes are set out on the product hub. Release testing is explained on the COA page, ordering on the MOQ page, the assay itself in the HPLC method note, and the release file on the quality page. ### 04 β-NAD: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/specialty/nad/moq/ Reviewed: 2026-11-19 β-NAD ships from a 1 kg foil pouch; a 25 kg fiber drum is the production pack, and the standard lead time is 1–7 days. The 1 kg minimum is a traceability decision: one pack, one lot code, one retained sample and one certificate. A quotation becomes comparable only when it names NAD+ (CAS 53-84-9), the assay basis, the pack, the destination and the documents. In one lineThe 1 kg pouch is a traceable lot, not a demonstration sample; the drum is the same lot family in a heavier pack. ## The minimum as a traceability unit The smallest pack has to do three jobs: supply a trial, leave a retained sample and allow an independent test. One kilogram covers all three without splitting a drum. It also travels as a parcel, so a formulator can start before the production plan is signed off. Anything smaller is normally a repack. The repack has its own handling history and loses the original pack identity, which makes a later dispute harder to settle. The 25 kg drum lowers handling per kilogram but ties up inventory; it is a production decision, not a better grade. Below 1 kg, most of what changes is handling and documentation, not the material, and the split no longer represents the production lot. That is a poor basis for a qualification decision. ## The standard packs Standard β-NAD packs | Pack | Fill weight | Where it fits | Handling | Foil pouch | 1 kg | Trial, qualification, small batch | Moisture barrier; close tightly after use | Fiber drum | 25 kg | Production | Lined drum; code on drum and liner | Granulated lot | On request | Better flow, less dust | New particle-size line and lead time Powder is the catalog form. Granulation changes the specification and the lead time, and it needs its own particle-size line. If the filling line needs a freer-flowing powder, settle that before the sample is drawn. ## From confirmation to dispatch One to seven days is the standard dispatch window from confirmation. It covers picking, documents and handover to the carrier; transit, customs and the customer's own release sit outside it. A granulated or non-standard pack needs its own date. Request the dispatch date, not just the lead-time window. A drum usually moves on a pallet; a pouch can move as a parcel. The Incoterm allocates freight and clearance, and the documents belong with the shipment. ## Six details for a comparable quote A quotation is only comparable when each of these is on it: - Molecule and form. β-Nicotinamide adenine dinucleotide (NAD+), CAS 53-84-9, written out. - Specification. Assay with its basis and wavelength, water, pH, heavy metals and microbiology. - Pack and quantity. A 1 kg pouch, a 25 kg drum, or a granulated lot. - Destination and Incoterm. The country and the port or delivery address, plus the trade term. - Documents. Certificate, specification, safety data sheet and any importer-specific statement. - Use and market. The end use (supplement, food or other) and the country of sale. Without the oxidation state or the destination, the offer is incomplete. A lot that fits one market can fall outside the file in another, so the document set is part of what is being sold. The quotation carries the commercial terms; this page does not. ## Qualifying from the first pouch Qualification starts with the first 1 kg pouch. Put it through identity, assay, water and micro testing, and keep a retained sample from that same pack. Check that the pouch code, the certificate code and the quotation code are the same. If a bench quantity is needed, raise it before the order. It is a repack rather than a catalog pack, and it need not come from the production drum's lot. A second pouch from the same lot can be reserved as the referee sample if the first is consumed during qualification. ## Commercial and quality terms Commercial terms live on the quotation: Incoterm, pack, lead time and documents. Quality terms live beside them: specification revision, COA per lot, retained sample, retest period and change control. Settle both before the first production order. If a lot fails, work from the retained sample and a joint re-test, not a photograph. Agree the referee laboratory in advance. Reference the specification revision in the purchase order, so that a later revision cannot be applied silently to a lot already in transit. Packs and catalog values are on the NAD+ product page. The COA page sets out what each lot is released against, and the compliance page covers the destination file. The MOQ glossary entry defines the term, and the logistics page covers freight and documents. ### 05 The regulatory file for β-NAD URL: https://nutrition.rainwoodbio.com/products/specialty/nad/compliance/ Reviewed: 2026-11-19 β-NAD is sold to the catalog specification, but whether and how it can be used is a destination question. This page does not assert a novel-food authorisation, a new dietary ingredient (NDI) notification or a permitted-ingredient status for any market. The buyer's regulatory team confirms the route, the dose and the label; the supplier's job is to make the specification, the certificate and the supporting statements accurate and current. In one lineThe specification covers the powder; the route, the dose and the label are destination questions for the buyer's regulatory team. ## The supplier-side file The supplier-side file has to be complete before the route question can be answered: which specification version, which lot, which results, which statements. A reviewer who has to chase a missing allergen declaration cannot finish the assessment. Build it around the material, not the folder. One specification revision, one COA per lot, one TDS, one SDS, and dated statements for allergens, GMOs, origin, residual solvents and change control. A folder of scans with no revision dates is not a file. ## European Union route Five instruments frame the EU review: general food law (Regulation (EC) No 178/2002), food information and labelling (Regulation (EU) No 1169/2011), food supplements (Directive 2002/46/EC), contaminants (Regulation (EU) 2023/915) and, when the substance is not established, the novel food Regulation (EU) 2015/2283. A novel-food authorisation is tied to a substance, a form, a use level and a food category. The catalog does not assert that such an entry covers β-NAD. The buyer's regulatory team checks the current consolidated text, the form and the conditions for the destination. ## United States route On the US side, the route runs through the Federal Food, Drug, and Cosmetic Act as amended by DSHEA. A dietary ingredient marketed before 15 October 1994 falls under the pre-DSHEA provision; a newer one is normally supported by an NDI notification under 21 CFR Part 190. 21 CFR Part 111 and 21 CFR 101.36 govern manufacturing and the Supplement Facts panel. This page does not assert that an NDI notification exists for β-NAD or that it covers this form and dose. The buyer confirms the basis and keeps the evidence. ## Ingredient limits and the finished product The catalog's metal limits apply to the ingredient. The finished product is a separate calculation: lot result times dose, compared with the limit for the destination. The arithmetic belongs in the file. Contaminant panel: catalog limits and the file check | Parameter | Catalog limit | What the file confirms | Lead (Pb) | ≤3 mg/kg | Lot result, method and finished-product calculation | Arsenic (As) | ≤2 mg/kg | Lot result and the destination limit that applies | Cadmium (Cd) | ≤1 mg/kg | Lot result and any category exception | Mercury (Hg) | ≤0.1 mg/kg | Lot result and method | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | The lot count and the absence statement Micro results release a lot; they do not make it sterile. Keep the retained sample so that a contested result can be re-examined. ## Naming the ingredient and reviewing claims No disease-related claim is made here. The label should name the ingredient in full as well as the abbreviation; structure/function wording needs substantiation and a market check. Claims sit outside the specification, and a certificate cannot authorise one. Age-related or metabolic wording is still a claim. Artwork review needs the finished dose, the form and the destination in front of the reviewer. ## The document set - Specification with a version number, the form and the CAS number. - Batch COA for the lot, with the assay basis, water by Karl Fischer and pH. - Technical and safety data sheets, both current. - Allergen, GMO and origin statements. - Residual-solvent statement for the route that was used. - Metals and micro results for the specific lot. - Stability summary covering the pack on order. - Change-control statement for source, process and pack. Date and revision every document. The quotation, the specification and the certificate should name the same version. A missing statement is easier to fix before the order than after the container is loaded. ## Pre-order checks - Form, CAS number and specification version are named. - The buyer's regulatory team has confirmed the destination route. - The use level and the finished-product dose are inside that route. - The certificate and specification are on file, with the assay basis and water result. - Technical and safety data sheets are current. - Allergen, GMO, origin and residual-solvent statements are dated. - The heavy-metal results are converted to the finished-product dose. - Label wording and claims have been checked against the destination rules. Catalog values are on the NAD+ product page. What a lot certificate reports is set out on the COA page, and the analytical tests are on the identity page. Framework references are collected in the EU regulatory note, and the release file is described on the quality page. ### 06 How we prove a β-NAD lot is the named dinucleotide URL: https://nutrition.rainwoodbio.com/products/specialty/nad/identity/ Reviewed: 2026-11-19 A β-NAD lot is only identified when four independent observations agree. The document must name β-nicotinamide adenine dinucleotide, CAS 53-84-9, C21H27N7O14P2 and molecular weight 663.43. HPLC retention and the UV spectrum must show the dinucleotide, the 340 nm region must exclude NADH, and Karl Fischer water must close the mass balance. The assay percentage alone cannot separate β-NAD from NADH, NMN or a diluted powder. In one lineFour independent observations have to agree before a lot is β-NAD: the document, the chromatogram, the 340 nm region and the water result. ## Four questions, four kinds of evidence Identity is easier to audit when it is split into separate questions. Four layers of β-NAD identity | Evidence | What it establishes | Test | What it cannot show | Document | The name, form and CAS number | Name, CAS, formula, molecular weight | The powder itself | Chromatogram | The dinucleotide at a retention time | HPLC retention and UV spectrum | The oxidation state | 340 nm region | Oxidised or reduced form | Absorbance, or dual-wavelength HPLC | Purity | Mass balance | Water and dilution | Assay, Karl Fischer, impurity peaks | Identity A retention time without a spectrum is half an identification. An assay without water cannot be converted between bases. Water without assay cannot show what the rest of the powder consists of. ## The 340/260 ratio and the oxidation state NAD+ absorbs near 259 nm and has no 340 nm band. NADH has the 259 nm band and a 340 nm band from the reduced ring. The 340/260 ratio is therefore an oxidation-state measurement. A β-NAD lot should sit near zero. A distinct 340 nm band means NADH is present. In HPLC, a 340 nm detector sees only the reduced form; a 260 nm detector sees both. If the method does not separate them, the 260 nm result is a sum. The ratio is not a purity test. A 340-absorbing impurity adds to it, and dilution can preserve it. Use it with the chromatogram, assay and water. ## What XRD can and cannot show XRD asks whether the solid is crystalline and whether the pattern matches a reference. A freeze-dried or spray-dried nucleotide may be amorphous or partly crystalline, depending on isolation and drying. The pattern is therefore a process fingerprint and a way to spot a crystalline diluent, not a stand-alone identity test. Request the reference pattern, the preparation and the detection limit. XRD says nothing about water content or the salt form, and it cannot distinguish two amorphous solids. In a dispute, the chromatogram, the 340/260 ratio and the mass balance carry more weight. ## How substitution shows up Signals of substitution or dilution in a β-NAD lot | Adulterant | Effect | Signal | Test | NADH | Adds the reduced form | 340 nm band; different retention | UV, dual-wavelength HPLC | NMN or nicotinamide riboside | Adds another nicotinamide form | Extra or shifted peak; different UV | HPLC, mass spectrometry | Niacinamide | Adds a small, early-eluting molecule | Early peak; lower assay | HPLC | AMP or ADP | Adds related nucleotides | Extra peaks near the main peak | HPLC, mass spectrometry | Diluent | Lowers the assay | Low assay; balance mismatch | Assay, Karl Fischer, impurity profile Appearance is the weakest evidence: white to off-white covers a wide range, and a blend can be coloured to match. The 340/260 ratio, the chromatographic profile and the mass balance are harder to fake. A certificate that stops at appearance and assay has skipped the tests that would catch the likely substitution. ## Identity clauses for the specification - “β-Nicotinamide adenine dinucleotide (NAD+), CAS 53-84-9, C21H27N7O14P2, molecular weight 663.43.” - “Assay ≥95.0% by HPLC, with the basis and the detection wavelength stated.” - “Identification by HPLC retention and UV spectrum; report the spectrum, not only the retention time.” - “Report absorbance at 340 nm; a clear 340 nm band is a deviation to investigate.” - “Water ≤5.0% by Karl Fischer; pH 2.0–4.0 in a 1% solution.” - “No unspecified impurity above the agreed limit; report the chromatogram.” - “Form, destination market and pack confirmed before the order.” ## Questions that produce evidence - Which CAS number appears on the certificate, and is the ingredient named as β-NAD rather than NADH? - Will the chromatogram and UV spectrum accompany the assay figure? - What absorbance does the lot give at 340 nm, and how was the 340/260 ratio derived? - What is the Karl Fischer water for this lot, and on which basis is the assay reported? - If a result is contested, will you re-test the retained sample jointly? Answers to those five questions are an identity file; a lone assay percentage is not. Catalog values are on the product hub. The COA page shows where each result appears on a lot certificate, and the grades page compares powder with granulate. The level-four comparison covers the oxidation states, and the HPLC method note explains the separation. ### 01 What the COA for nicotinamide riboside chloride actually contains URL: https://nutrition.rainwoodbio.com/products/specialty/nicotinamide-riboside/coa/ Reviewed: 2026-11-19 A nicotinamide riboside chloride certificate is a test report for one lot: appearance, two identification tests, an HPLC assay, chloride, water and the contaminant panels. The catalog limits below are the gates; the batch COA records what the laboratory measured against them. Read the form line before the assay, because a high percentage on the wrong salt is still the wrong material. In one lineThe certificate has to prove the salt as well as the nucleoside: an HPLC assay beside the chloride figure, the NMR identity and the water result. ## Reading the certificate as a report A COA row should be readable without a phone call. It needs the parameter, the technique that produced the number, the limit the lot had to meet and the result itself. When a supplier prints only “conforms”, the buyer has been handed a verdict with no working. The HPLC row places the nucleoside at the reference retention time and supplies a UV spectrum; the NMR row shows the nicotinamide ring and the ribose anomeric signal. Neither is a purity test, and a certificate that merges them has collapsed two separate questions into a single line. Identity, assay, chloride and moisture · nicotinamide riboside chloride | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | HPLC retention and UV spectrum | Conforms to the reference | Identification | 1H NMR | Conforms to the nicotinamide riboside structure | Assay | HPLC with UV detection | 98.0–102.0% | Chloride | Ion chromatography or potentiometric titration | 12.0–13.0% | Water | Karl Fischer | ≤2.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent ## Assay, chloride and the salt basis Nicotinamide riboside chloride has the formula C11H15ClN2O5 and a molecular weight of 290.70. The chloride accounts for 35.45 of those mass units, or 12.19% at full stoichiometry, which is why the catalog window of 12.0–13.0% can be predicted before a sample is weighed. By the same arithmetic, about 87.5% of the salt is the nicotinamide riboside moiety; a 98.0–102.0% HPLC assay describes the salt, not the free base and not the nucleoside alone. That makes chloride the most direct evidence of the counter-ion. A result inside the window agrees with the chloride form. A figure below it suggests free base, a carrier or a different anion; a figure above it suggests residual chloride from the process. The technique belongs beside the number: ion chromatography and titration see different interferences. Water is capped at ≤2.0% by Karl Fischer, a tight gate for a solid that pulls moisture from the air. The COA should say whether the assay was calculated as-is or on the dried basis. With water held under 2.0% the gap is small, but a lot close to the cap has little room left for a humid warehouse. NMR carries the structural identity: the nicotinamide ring and the ribose anomeric proton. A retention time can be matched by a related nicotinamide, so the spectrum is the second dimension. Ask for the spectrum and the chromatogram rather than accepting a conformity statement. ## Limit and result are different columns Two columns are doing different jobs. The release limit tells the laboratory where to draw the line; the result tells the buyer what the powder actually was. A range in both columns yields a document that can neither fail nor inform. What the result column should contain | Parameter | Release limit | Result column | Assay | 98.0–102.0% by HPLC | A measured percentage, with the basis and the method | Chloride | 12.0–13.0% | A measured percentage and the technique used | Water | ≤2.0% by Karl Fischer | A measured percentage | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot | Appearance | White to off-white | A description of the lot as received Pass or fail is a summary, not the evidence. The evidence for metals is one figure per element; a total hides the element that matters. For microbiology it is a plate count plus an absence statement. The lot code, the pack and the test date should also appear, so the result can be tied to a drum. ## Batch-to-batch drift Water and chloride are the two numbers most likely to drift. Drying and packing set the water; salt stoichiometry and isolation set the chloride. A value at the edge of either window deserves a look at the batch record before it becomes a rejection. Colour is a coarse line but a useful one. White to off-white leaves space for normal variation, yet a yellow or brown tint can follow heat exposure or a rising related-substance peak while the assay still passes. Three or four consecutive lots are more informative than one: water climbing across deliveries, or a new shoulder on the main peak, warrants a check. Assay itself is method-dependent. A one-point shift between two laboratories can come from the standard, the integration or the sample preparation rather than the lot. The certificate should name the column, the mobile phase, the wavelength and the reference standard so the number can be reproduced. ## When an outside laboratory is needed Independent testing earns its cost in four situations: a new source, a first shipment into a regulated market, a salt claim the supplier's paperwork does not support, or a contested result. The panel should not simply repeat the supplier's COA. It should combine HPLC with a diode array for identity and assay, 1H NMR for structure, chloride by ion chromatography, Karl Fischer for water, ICP-MS for the metals and a plate count for microbiology, all on one sample. Ask the laboratory for its detection and quantification limits. A “not detected” entry without a limit says more about the method than about the sample. Confirm ISO/IEC 17025 accreditation for each test, and keep the chromatogram and spectrum with the report. Chain of custody is part of the evidence. The material tested should be the material retained, and the report should name the lot. If a result is disputed, hand the referee the retained sample, the supplier's certificate and the specification, and ask for the tests that distinguish the salt from the free base rather than another run of the same assay. ## A supplier comparison A side-by-side review should cover six items: form and CAS number; assay result and basis; chloride result; water by Karl Fischer; heavy metals and microbiology; pack size and lot code. Two offers that match on assay but differ on chloride or water are not the same powder. Traceability is the second layer: who made the lot, by which process, and with which drying and packing steps. The catalog ranges sit on the nicotinamide riboside product page. The tests that separate the salt from the free base are on the identity page; the chromatographic method is described in the HPLC method note. NMN is a different molecule with its own certificate requirements, covered on the NMN product page, and the dinucleotide form is on the NAD page. The release workflow is on the quality page. ### 02 Nicotinamide riboside chloride or free base: choosing the grade URL: https://nutrition.rainwoodbio.com/products/specialty/nicotinamide-riboside/grades/ Reviewed: 2026-11-19 The catalog grade is nicotinamide riboside chloride: CAS 23111-00-4, C11H15ClN2O5, molecular weight 290.70, with chloride at 12.0–13.0%. The free base is a different material with its own CAS number and its own mass basis, and the two are not interchangeable in a formula or on a label. This page compares the forms and sets out what changes when a project switches from one to the other. In one lineThe catalog grade is the chloride salt, not the free base: the counter-ion changes the CAS number, the mass basis and the label name. ## Why nicotinamide riboside comes in two forms Nicotinamide riboside is a nucleoside: a nicotinamide ring joined to a ribose. The molecule can be supplied as the neutral free base or as the chloride salt, and the chloride is the form in this catalog. The counter-ion gives the powder a defined composition and an analytical handle, because the chloride figure can be measured and compared with theory. The free base carries no counter-ion. Its molecular weight is 254.24 against 290.70 for the salt, so the same mass of powder does not carry the same amount of nicotinamide riboside. An order for “NR” that does not name the salt has not specified a grade. ## Chloride salt against free base Nicotinamide riboside chloride and the free base | Property | Chloride salt (catalog) | Free base | CAS number | 23111-00-4 | 1341-23-7 | Formula | C11H15ClN2O5 | C11H14N2O5 | Molecular weight | 290.70 | 254.24 | Chloride | 12.0–13.0% (theory 12.19%) | None | Nicotinamide riboside content | About 87.5% by mass | The whole mass, before assay | Water | ≤2.0% by Karl Fischer | Own specification | Label name | Nicotinamide riboside chloride | Nicotinamide riboside | Catalog grade | Yes | No The last two rows decide most projects. The label name follows the form, and the form in this catalog is the chloride. A certificate for the free base does not describe the salt, even when the assay figures are close. ## Appearance, solubility and handling The chloride salt is a white to off-white, free-flowing powder, freely soluble in water. It is hygroscopic, so the water limit and the pack belong in the specification rather than in a storage note. A pouch left open takes up moisture, the as-is assay falls and the powder can cake. The free base has its own solubility and handling profile. A formula built on one form cannot be switched to the other without rechecking dissolution, appearance and hold time. For a capsule or a stick pack the salt is the practical starting point; for a non-aqueous system the free base may be the only one that dissolves. The formulation decides, and that decision should come before the label artwork. ## Mass arithmetic and the label The mass ratio between the forms is 254.24 ÷ 290.70 = 0.8746. A label that declares 300 mg of nicotinamide riboside chloride delivers about 262 mg of the nicotinamide riboside moiety. A label that needs 300 mg of the moiety needs 343 mg of the salt. These are label arithmetic, not a suggested intake. The assay basis adds a second calculation. A 98.0% result on the dried basis is not 98.0% of the powder as weighed when water is present. Convert with the water result first, then apply the salt factor if the label uses the other form. Leaving either step out is the usual error, and it is invisible on a certificate that reports a single percentage. The same reasoning applies to the dosage form. A capsule uses the solid salt, with a fill weight sized on the salt mass. A stick pack or a drink mix takes the salt because it dissolves. A tablet needs a compression study on the salt, not on a blend built from the free base. ## Specification clauses - “Nicotinamide riboside chloride, CAS 23111-00-4, C11H15ClN2O5, molecular weight 290.70.” - “Assay 98.0–102.0% by HPLC; state whether the result is as-is or on the dried basis.” - “Identification by HPLC retention and UV spectrum, and by 1H NMR.” - “Chloride 12.0–13.0%; water ≤2.0% by Karl Fischer.” - “Heavy metals and microbiology as listed; pack, storage condition and retest period.” - “Destination market and the labelled form confirmed before the order.” ## When the other form does not fit If the label names the free base, the chloride salt is not a drop-in: the declared ingredient, the mass and the market file would all describe a different material. If the label names the chloride, a free-base lot is outside the specification even when its assay is higher. The form belongs to the identity; it is not a factor applied at the balance. Any switch between the forms needs written change control, a fresh specification, a new batch certificate and a label review. It is not a rename, and it is not a way to average two quotations. The catalog ranges are on the nicotinamide riboside product page. The certificate lines are explained on the COA page; the tests that separate the salt from the free base are on the identity page; the pack and moisture risks are on the stability page. The comparison with NMN is on the NR versus NMN page, and that molecule is covered on the NMN product page; the dinucleotide is on the NAD page. The assay method is described in the HPLC method note. ### 02.1 NR vs NMN: two nicotinamide forms, two files URL: https://nutrition.rainwoodbio.com/products/specialty/nicotinamide-riboside/grades/nr-vs-nmn/ Reviewed: 2026-11-19 Nicotinamide riboside and nicotinamide mononucleotide are different molecules: NMN carries a 5'-phosphate that NR does not. This catalog supplies NR as the chloride salt, CAS 23111-00-4, C11H15ClN2O5, molecular weight 290.70; NMN is the free acid, CAS 1094-61-7, molecular weight 334.22. The phosphate changes the assay basis, the stability questions, the regulatory file and the label, so the two are not interchangeable. In one lineThe 5'-phosphate is the whole difference: it moves the molecular weight, the salt form, the assay basis and the regulatory file. ## Two structures, one phosphate apart NMN is the 5'-phosphorylated nucleoside; NR is the same nucleoside without the phosphate. The extra phosphate adds about 80 mass units and makes NMN an acid, so NMN is normally supplied as the free acid. NR is supplied here as the chloride salt. The two are different mass bases, not different names for the same powder. Nicotinamide riboside chloride and NMN · the structural facts that change the file | Property | NR chloride (this catalog) | NMN | Chemical name | Nicotinamide riboside chloride | β-Nicotinamide mononucleotide | CAS number | 23111-00-4 | 1094-61-7 | Formula | C11H15ClN2O5 | C11H15N2O8P | Molecular weight | 290.70 | 334.22 | 5'-phosphate | Absent | Present | Usual supplied form | Chloride salt | Free acid | Counter-ion | Chloride, 12.0–13.0% | None The comparison has one trap. 290.70 is the salt and 334.22 is the free acid, so a straight molecular-weight comparison mixes a counter-ion with a phosphate. The NR free base is 254.24; the phosphate adds about 80 units to that. When the question is the nucleoside, compare 254.24 with 334.22 and then account for the chloride separately. ## What an assay means for each Both ingredients are sold on a percentage, but the percentage is not the same measurement. NR chloride is specified at 98.0–102.0% by HPLC, with chloride at 12.0–13.0% and water at ≤2.0%. NMN is specified at ≥98.0% by HPLC, with water at ≤5.0%, a pH of 2.0–4.0 at 5% and an α/β anomer ratio read from NMR. One figure describes a salt with a counter-ion; the other describes a free acid with an anomer. A 98.0% NR chloride result is not 98% NR by mass. About 87.5% of the salt's mass is the nicotinamide riboside moiety, so the chloride figure and the salt factor have to be applied before the label dose is calculated. On the NMN side, the anomer ratio and the water are the figures that a single HPLC percentage can hide. Both certificates should name the column, the mobile phase, the wavelength and the standard. NR adds chloride to the panel; NMN adds the anomer and pH. A method that resolves neither the counter-ion nor the anomer has reported a peak, not a specification. ## Stability questions differ Both are water-soluble and hygroscopic, so the pack matters for both. NR chloride is specified at water ≤2.0%, which is a tighter release gate than NMN's ≤5.0%. NMN adds an ionisable phosphate and an acidic 5% solution at pH 2.0–4.0; that acidity can shift a low-buffer blend and sits beside hydrolysis and anomerisation as the first stability questions. NR brings its own salt balance and water uptake. The handling rules overlap: a sealed, dark pack for the solid; a protected, validated solution; and a retest period drawn from data on the exact pack. The failure modes do not overlap completely, so a stability protocol for one molecule does not transfer to the other. A statement that one is more stable than the other needs a same-pack, same-method comparison; this page does not make that claim. ## The regulatory files are separate Some markets have a product-specific novel-food entry for nicotinamide riboside chloride. The buyer's regulatory team confirms the current text, the conditions of use and any maximum daily amount for the destination, and it does not accept a supplier summary as the permission. In the US, the dietary-supplement file is built around the exact ingredient and its intended use; that check is separate again. The NMN file is separate from the NR file. A conclusion, a notification or a statement for one substance does not cover the other, and the two are reviewed on their own records. The UK register is separate again. The practical rule is to clear the molecule, the form and the market before the label is drafted. ## The label names the salt The label must name the form. “NR” alone does not say chloride, and “NMN” alone does not say β. The ingredient declaration, the assay basis and the net content have to match the specification. If the label says β-NMN and the drum contains NR, the label is wrong even when the HPLC number is high. The two names are not synonyms on a label. A blend of NMN and NR is a third material, not a way to average the two, and it needs its own specification, its own stability data and its own regulatory review. A label change from NMN to NR is a new file, a new specification and a new stability pack, not a rename. ## Choosing before the quotation Four questions that decide between the two forms | Question | NR chloride | NMN | Which form is named? | Nicotinamide riboside chloride | β-NMN, free acid | Which assay basis? | HPLC, with chloride and water | HPLC, with anomer, pH and water | Which market file? | Product-specific entry where it exists | Checked on a separate record | Which pack? | Hygroscopic salt; water ≤2.0% | Hygroscopic acid; water ≤5.0% Choose NR chloride when the destination permits that form, the label calls for the chloride, and the salt basis fits the dose and the pack. Choose NMN when the market permits it, the label and the specification call for β-NMN, and the method controls the anomer. Choose neither on a claim; the decision belongs to the market permission, the label, the analytical control and the dosage form. The catalog ranges are on the NR product page; the grade choices are on the NR grades page; the certificate lines are on the COA page; the identity tests are on the identity page. The parallel file is on the NMN product page, and the dinucleotide is on the NAD page. The chromatographic method is described in the HPLC note, and the release workflow is on the quality page. ### 03 Nicotinamide riboside chloride is hygroscopic; the pack decides the shelf life URL: https://nutrition.rainwoodbio.com/products/specialty/nicotinamide-riboside/stability/ Reviewed: 2026-11-19 Nicotinamide riboside chloride takes up water from the air, and the catalog limit is ≤2.0% by Karl Fischer, so the pack does most of the work of keeping the powder within specification. A sealed solid is easier to hold than a solution, where water, heat and pH meet. Any shelf-life figure has to name the pack and the storage condition behind it. In one lineThe powder keeps only as dry as the pack keeps it: water uptake, heat and the solution matrix set the shelf life. ## The powder: water is the first variable The 2.0% water gate is applied at release and does not protect the powder afterwards. An opened pouch exchanges moisture with the room; the Karl Fischer result climbs, the as-is assay slips and the powder begins to cake. Practical storage is therefore part of the purchase specification even when the certificate does not mention it. The 1 kg foil pouch is the barrier, and the seam is where it fails. Folding an opened pouch closed is not a heat seal, and the trapped air is a moisture source. Decant what remains into a smaller opaque container, or finish the pack inside the in-use window. The 25 kg fiber drum depends on its liner. Close the liner after each withdrawal, stand the drum off a damp floor and write the opening date on the label. When a cold pack arrives, let it reach room temperature while still sealed so condensation forms on the outside, not on the powder. ## The solution: the harder format The salt dissolves readily in water, which is convenient for a stick pack and removes the protection of the pack. Once dissolved, the glycosidic bond is exposed to hydrolysis; heat and pH determine how fast that happens. A hot-fill or pasteurisation step adds a heat load that the dry powder never experiences. If a liquid is required, exclude light, set and record the pH, keep oxygen low and prove the hold time before the filler is committed. Data from the bulk powder cannot be used to assign a beverage shelf life: the matrix, the process and the container each change the rate, and the measurement has to be made in the finished drink. ## What moves the material Factors that move nicotinamide riboside chloride during storage | Factor | What it does | Control | Moisture | Water rises; as-is assay falls; caking | Sealed foil; desiccant if the climate demands it | Heat | Faster hydrolysis; colour drift | Cool, stable store; short heat exposure | Light | Related substances and colour change | Opaque pack; dark store | pH | Hydrolysis rate in solution | Measure and fix the matrix pH | Oxygen | Oxidation at wet surfaces | Low headspace; sealed pack; de-aerated process | Metal ions | Colour and complexes in solution | Stainless or plastic contact; avoid iron and copper The factors reinforce each other. A warm, bright, damp store is worse than any one of them alone, and a clear bottle of solution at an unmeasured pH adds light and pH to the water already present. The question is not whether the material is stable in the abstract, but how long it stays inside specification in a defined pack and condition. ## Designing the stability protocol Write down four things before the first sample goes into the chamber: the pack, the condition, the time points and the tests. 25 °C/60% relative humidity and 30 °C/65% relative humidity model the warehouse; 40 °C/75% relative humidity is the stress arm; a light-exposure arm is needed because a dark oven cannot see a photochemical failure. At each point measure assay, water, chloride, appearance, identity and microbiology. Chloride belongs on the panel: if it drifts while the assay holds, the salt balance has changed. Demand the individual values and the pack identification, not a line that says the sample passed. Use data from the pack you will actually buy. Headspace and opening history differ between a pouch and a drum, and a result borrowed from the other pack is not evidence for yours. ## The formula changes the test In a capsule or tablet the water activity is low, yet the shell and the excipients can still pass moisture into the fill. Measure water at release and after storage, and inspect the fill for colour and caking. In a stick pack the seam and the foil are the critical points; a pinhole defeats the barrier, so inspect the strip as well as the powder. A drink brings water, pH, heat and oxygen together. Data from the bulk powder is a starting point, not the answer. Whether to add an overage is a formulation and label decision; it cannot compensate for a pack that admits moisture. ## Where the shelf life comes from No single shelf-life number is published for this material, because the number would be meaningless without a pack and a storage condition. The specification's retest period is the one that the stability file for that pack supports. A figure quoted without those details is a marketing statement rather than a shelf life. When the retest period ends, re-test the retained sample before any extension. Never extend by assumption, and never move a bulk figure to a repack. The product page lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time. The assay method is described in the HPLC note, and the release workflow is on the quality page. ### 04 Nicotinamide riboside chloride: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/specialty/nicotinamide-riboside/moq/ Reviewed: 2026-11-19 The minimum order for nicotinamide riboside chloride is 1 kg, in a foil pouch; the bulk pack is a 25 kg fiber drum. Standard packs ship in 1–7 days from order confirmation. Before a quotation is fixed, the buyer needs to state the salt form, the assay basis, the quantity, the destination, the documents and the market, because the destination check can change what can be offered. In one lineOne kilogram is the smallest pack that can be sampled, tested and traced as a lot; the destination check comes before the quotation. ## Why one kilogram The minimum is set by the smallest unit that can carry a lot identity. A kilogram is enough for a bench trial, a retained sample and a third-party check, and it moves as a parcel without a pallet. Those are practical reasons, not a marketing device. Below that weight the material is normally taken from a larger lot and repacked. The repack adds a handling step, breaks the link to the original pack and makes the lot trail harder to follow, while the chemistry is unchanged. The drum lowers handling per kilogram but ties up stock for longer. The minimum is about the pack, not about persuading a buyer to take more. Because the solid is hygroscopic, each opening is an exposure. A pack that is consumed quickly can be safer than a drum opened repeatedly in a humid room, so the right size follows consumption as well as order volume. ## Pack sizes Standard nicotinamide riboside chloride packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; keep closed between uses | Fiber drum | 25 kg | Production | Liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Particle profile is a new specification | Dilution | On request | Lower assay per gram | Carrier and label change The catalog item is the chloride salt as a powder. Granulation and dilution are different specifications with their own certificates, not packing options. A request for a freer-flowing grade should reach the supplier before the quotation, since it can change the particle profile and the dispatch date. ## Lead time and handover Orders for standard packs carry a 1–7 day lead from confirmation. The clock covers picking, document preparation and handover to the carrier; transit, customs and the customer's own release sit outside it. Granulation, dilution and non-standard packs lengthen the lead, and the offer should list that time separately. Ask for a dispatch date as well as a lead time. The freight mode differs: a drum goes on a pallet, a pouch as a parcel, and the Incoterm fixes who books it and who clears customs. Documents should be in the same shipment as the lot. ## What an offer needs An offer becomes comparable when it states six things: - Product and form. Nicotinamide riboside chloride, CAS 23111-00-4, with the salt written out. - Specification. Assay with its basis, chloride, water, heavy metals and microbiology. - Quantity and pack. The quoted pack (1 kg pouch or 25 kg drum) or a granulated or diluted grade. - Destination and Incoterm. The destination, the delivery point and the trade term. - Documents. COA, specification, SDS and any importer statement. - Intended use and market. Supplement, food or another use, and the country of sale. An offer that omits the market or the form cannot be compared with another. One destination may accept the powder that another excludes, and the documents are part of the offer. The destination's permitted form and dose are confirmed in writing with the buyer's regulatory team before the quotation is fixed. We do not publish commercial terms on this page. ## A sample with a lot trail Qualification starts with the 1 kg pouch. Before scale-up, check identity by HPLC and NMR, assay, chloride, water and microbiology, and retain material from the same pack. Sample, COA and quotation should carry the same lot code. A sample without a lot trail is a demonstration. For a smaller bench quantity, agree it in advance. Material split from a bulk lot is a repack with its own trail, not the catalog pack, and the paperwork should say so. The bench sample and the production drum are not necessarily from one lot. ## Terms to fix before ordering An offer should state the commercial terms, the Incoterm, the pack, the lead time and the documents. The quality side belongs in the same conversation: specification revision, COA per lot, retained sample, retest period and change control. A quality agreement signed before the first production order is better than a dispute after it. Replacement and return terms are set by the offer and the quality agreement. If a lot fails the agreed specification, the retained sample and a joint re-test are the evidence; a photograph of the powder is not. Agree in advance who pays for the referee laboratory and which laboratory both sides accept. The product page carries the catalog specification; the COA page lists the release tests; the compliance page covers the market files; the NMN page shows the parallel file for the other nicotinamide form. The term is defined in the MOQ glossary entry, and shipping documents are covered on the logistics page. ### 05 The regulatory file for nicotinamide riboside chloride URL: https://nutrition.rainwoodbio.com/products/specialty/nicotinamide-riboside/compliance/ Reviewed: 2026-11-19 Nicotinamide riboside chloride is the material in this catalog, CAS 23111-00-4, and the regulatory file is assembled around that salt, the destination and the finished product. Some markets have a product-specific entry for the chloride form; the buyer's regulatory team confirms the current text, the conditions of use and any maximum daily amount. The notes below set out what the file should contain so the specification, the pack and the label can be reviewed together. In one lineThe file names the chloride form, the lot result and the destination route; a statement about “NR” in general covers none of the three. ## The four answers in the file A regulatory file is a set of answers, not a folder. Four of them decide whether the project can proceed. What exactly is being bought, and against which revision of the specification? Which lot is being released, and what did its COA measure? What limits and label rules will the destination apply to the finished product? What happens to the file when the source, process or pack changes? The COA closes the lot question. The technical data sheet closes the specification question. The safety data sheet closes the handling question. None of the three closes the route question; that one belongs to the market and to the buyer's regulatory team. Supporting declarations cover allergens and GMOs, origin, residual solvents and any customer-specific requirement. Name the gaps before the order is placed. A versioned document list is easier to audit than a folder of undated PDFs. ## European Union Some markets have a product-specific novel-food entry for the chloride form. In the EU, the buyer's team confirms whether that entry covers the member state of sale, reads the current conditions of use and finds any maximum daily amount. This page does not cite a regulation number, because the text and the conditions are the part that has to be verified. The product-specific route sits beside general food law, labelling rules and contaminant limits. A raw material that meets the catalog can still fail a destination limit after the finished-product calculation, and a label that names the free base does not match a file written for the chloride. ## United States The US file follows the dietary-supplement route and the basis the supplier relies on for the ingredient. The buyer's regulatory team checks that the basis reaches the finished product, the dose and the claim. A supplier's category statement is not a substitute for that review, and the label is assessed separately from the COA. The US record for nicotinamide riboside chloride is separate from the NMN record. A notification or conclusion for one substance does not travel with the other, even though both are nicotinamide forms. Check substance, then form, then market. ## Contaminants at the finished-product level The contaminant panel has to be expressed at the finished-product level, not only at the drum. The table is a starting point for a supplement file; the destination text and the daily dose give the final figure. Convert the catalog metal panel to the intake that the consumer will actually receive. Contaminant limits to confirm for the finished product | Parameter | Typical reference in a supplement | Evidence the file needs | Lead (Pb) | 3.0 mg/kg | Lot result, method, limit and the finished-product calculation | Cadmium (Cd) | 1.0 mg/kg | Lot result and any category exception that applies | Mercury (Hg) | 0.10 mg/kg | Lot result and method | Arsenic (As) | Customer or market limit | The agreed limit and the method, stated on the certificate Chloride and water are specification lines, not contaminant limits. They belong on the technical data sheet and the COA because they describe the salt and the powder. A file that reports them only as “conforms” has lost two figures that can be checked against theory. ## Label and claim review The label names the material in the form the destination requires. “Nicotinamide riboside chloride” is not the same declaration as “nicotinamide riboside”, and “NR” alone does not identify the salt. The ingredient name, the net quantity and the specification have to use one form. Claims are reviewed apart from the certificate. The brand's regulatory reviewer checks that the wording is permitted for the product, the form, the dose and the market. No disease-related claim belongs on the pack; a structure or function statement needs its evidence and the market's disclaimer. An NMN claim does not carry over to NR, and a free-base claim does not describe the chloride. ## Documents the file needs - Specification with version, form, CAS and assay basis. - Lot COA with methods and measured values. - Technical data sheet and safety data sheet. - Allergen, GMO, origin and residual-solvent declarations. - Metal and microbiology results with the methods named. - Stability summary for the pack being purchased. - Change-control route for source, process and pack. - Any destination-specific statement required by the importer or brand. ## Before the first order - The revision, CAS and chloride form are recorded. - COA, TDS, SDS and the declarations are on file. - Metal figures are converted to the dose the consumer receives. - The chloride is named on the label, and the claim has been checked for the destination. - The destination route and any maximum daily amount are confirmed in writing. - Change control covers the source, the process and the pack. The catalog specification is on the product page; the certificate lines are on the COA page; the tests that prove the form are on the identity page. The parallel file for the other nicotinamide form is on the NMN page, and the dinucleotide is on the NAD page. The release file is described on the quality page, and the framework references sit in the EU regulatory notes. ### 06 How we prove a nicotinamide riboside lot is the chloride salt URL: https://nutrition.rainwoodbio.com/products/specialty/nicotinamide-riboside/identity/ Reviewed: 2026-11-19 A nicotinamide riboside chloride lot is confirmed when five measurements agree: the document names the salt and CAS 23111-00-4; HPLC retention and UV match the reference; 1H NMR shows the nicotinamide ring and the ribose; chloride falls between 12.0% and 13.0%; and assay, water and chloride reconcile. A percentage cannot distinguish the salt from the free base or a diluted powder. Chloride is the counter-ion check. In one lineIdentity is a set of agreeing measurements: HPLC and NMR say the nucleoside, chloride says the salt, and water closes the balance. ## Five layers of evidence Identity is not one test. It is a chain of answers, and each link can fail while the others hold. The layers below ask different questions and call for different evidence. A reply that covers only the first link describes the paperwork, not the material. Layers of nicotinamide riboside chloride identity | Layer | Question | Test | What it proves | Document | Is the form on paper? | Name, CAS number, formula | Only the paperwork | Chromatography | Is the nucleoside peak there? | HPLC retention and UV spectrum | The molecule, not the anion | Structure | Is the structure right? | 1H NMR | The ring and the ribose | Counter-ion | Is chloride the counter-ion? | Ion chromatography or titration | The salt form | Mass balance | Does the mass add up? | Assay, water, chloride | Dilution or moisture NMR tells this nucleoside from a related nicotinamide; chloride tells the salt from the free base. Neither is a purity assay, and one does not substitute for the other. ## The chloride ratio: proving the salt There is one chloride per molecule. The theoretical content is 35.45 ÷ 290.70 = 12.19% by mass, so the catalog window of 12.0–13.0% can be predicted from the formula. Inside that window, with a 98.0–102.0% assay, the result is consistent with the chloride salt. Below it, consider free base, a carrier or another anion; above it, residual chloride or a different salt. The same arithmetic gives the nucleoside share: 254.24 ÷ 290.70 = 87.5% of the salt's mass. A 98% assay on the salt is therefore not 98% of the nucleoside. The label, the dose and the COA should agree on which figure they are quoting. The ratio also exposes a blend. Salt plus free base can be adjusted to sit inside the assay window, but the chloride result drops below 12.0% in proportion to the free-base fraction. HPLC sees the nucleoside; chloride sees the counter-ion. That is the strongest reason to keep chloride on the COA. Ion chromatography and titration are not equally selective, so ask which technique produced the figure and read it beside water, both calculated on the powder as received. ## X-ray diffraction: solid form X-ray diffraction asks whether the solid has a crystal lattice that matches a reference. It can tell a crystalline solid from an amorphous dilution and compare lots from two suppliers. It cannot measure purity or the counter-ion. Request the reference pattern and the detection limit before a match is accepted. Diffraction, chloride, HPLC and NMR together are stronger than any one of them. It is not a routine release test here, and a certificate that says only “XRD conforms” without the pattern adds little. It is most useful when the question is solid form. ## Substitutions and their signals Common nicotinamide riboside chloride substitutions and the signals | Adulterant | What it does | Signal | Test | Free base | No chloride; MW 254.24 | Chloride under 12.0%; assay mismatch | Chloride, 1H NMR, mass balance | NMN | Carries a 5'-phosphate (MW 334.22) | Phosphate present; different retention | HPLC resolution, 31P NMR | Nicotinamide | Hydrolysis fragment; small molecule | Early peak; low molecular weight | HPLC related substances, NMR | Dilution | Assay and chloride fall together | Both below range | Mass balance, chloride | Moisture | Water up; as-is assay down | Water above 2.0%; dried basis normal | Karl Fischer, assay basis Colour proves little. White to off-white covers a wide range, and a yellow tint can follow heat or a trace metal while the assay passes. The useful signals are chloride, NMR and mass balance. A COA with appearance and assay but no chloride has not tested the obvious substitution. ## Identity clauses for the specification - “Nicotinamide riboside chloride, CAS 23111-00-4, C11H15ClN2O5, molecular weight 290.70.” - “Assay 98.0–102.0% by HPLC, with the basis stated.” - “Identification by HPLC retention and UV spectrum, and by 1H NMR.” - “Chloride 12.0–13.0%; water ≤2.0% by Karl Fischer.” - “No free base or other nicotinamide above the agreed limit.” - “Destination market and salt form confirmed before the order.” ## Questions to put to the supplier - Which salt is this lot, and what CAS number appears on the certificate? - Will you send the HPLC chromatogram and UV spectrum, not just the assay figure? - Will you send the 1H NMR spectrum with the nicotinamide and ribose signals assigned? - What is the chloride value, by which method, and what water value came from the same lot? - If the lot is challenged, will you join a re-test on the retained sample? Those five answers, taken together, form an identity file; one assay percentage does not. The product page carries the catalog specification; the COA page shows where each figure sits on the certificate; the grades page compares the salt with the free base. The tests that separate NR from NMN are on the NMN identity page; the chromatographic method is described in the HPLC note, and the release workflow is on the quality page. ### 01 What the COA for policosanol actually contains URL: https://nutrition.rainwoodbio.com/products/specialty/policosanol/coa/ Reviewed: 2026-11-19 The certificate for a policosanol lot reports total policosanol by GC, the octacosanol share, the alcohol profile behind both figures, melting point, moisture, heavy metals and microbiology. The total is a sum of long-chain primary alcohols, not a single molecule, so the certificate has to show the peaks it added up. The limits on this page are the catalog values; a batch COA is what ties them to one pack. In one linePolicosanol is a sum of alcohols, not one peak: the certificate has to report the total by GC, the octacosanol share and the profile behind both numbers. ## Reading the certificate line by line A certificate earns its place when every line can be checked: the parameter, the method, the acceptance limit and the measured value. A row that says only “policosanol 90%” asks the reader to accept a conclusion. For a mixture the conclusion is only as good as the peak list behind it. Identity, composition and release specification · policosanol | Parameter | Method | Release specification | CAS number | CAS registry | 142583-61-7 (mixture); 557-61-9 (octacosanol component) | Appearance | Visual | White to off-white powder | Identification | GC retention against reference alcohols | Conforms to the reference profile | Total policosanol | GC-FID, sum of C24–C34 alcohols | ≥90.0% | Octacosanol share | GC-FID, C28 share with the basis stated | ≥60% | Melting point | Capillary or DSC | 78–82 °C | Moisture | Karl Fischer or gravimetric | ≤1.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count; absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent ## What the total means, and what it does not Policosanol is not a single substance with one molecular weight. It is a family of primary aliphatic alcohols, typically C24 to C34, and the certificate's “total policosanol” is the sum of the alcohol peaks that the method identifies. The sum can be calculated against an internal standard, which gives a mass fraction, or by area normalisation, which gives a share of the peaks that eluted. The two calculations do not produce the same number, and the certificate should name which one was used. The octacosanol line is a second calculation, not a second assay. Octacosanol is the C28 alcohol, CAS 557-61-9, formula C28H58O, molecular weight 410.76. The mixture itself is registered as policosanol, CAS 142583-61-7; the catalog carries the octacosanol number because that is the single alcohol the specification names. A certificate should show both numbers so the reader knows which material the lot represents. The 60% figure is a share, and the certificate should state whether it is read against the total alcohol sum or against the powder. A 90% total with a 60% share of the total is not 90% octacosanol. The GC method usually derivatises the hydroxyl group so the long chains elute as sharp peaks, then separates them on a high-temperature column with flame-ionisation detection. The method should name the column, temperature programme, internal standard and reference alcohols; without the reference list, a retention time is not an identity. ## What the limit means and what the result shows A release limit is the acceptance edge for one lot. The result is the number the laboratory obtained from that lot. Both belong on the certificate in separate columns, with the method beside them. Filling the result column with the specification range repeats the gate; it does not report a measurement. Evidence for each release line | Parameter | Limit | What the measured value column should show | Total policosanol | ≥90.0% by GC | The measured figure, the peak list and the calculation route | Octacosanol share | ≥60% by GC | The measured figure and whether the basis is total or powder | Melting point | 78–82 °C | The measured range and the method used | Moisture | ≤1.0% | The measured figure | Heavy metals | Per element | A figure in mg/kg for each metal | Microbiology | Counts and absence | Counts and absence statement “Passes specification” is a verdict, not evidence. For heavy metals the evidence is a figure per element, not a single total; for microbiology it is a count plus an absence statement; for the alcohol profile it is the peak list, not only the sum. The lot code must be the same on the certificate, the pouch, the drum and the retained sample. ## What moves between batches The source is the first variable. Sugarcane wax, rice bran wax and beeswax carry different alcohol distributions, and a refiner that changes source without changing the specification can keep the total at 90% while the C26, C28 and C30 proportions move. The refining sequence is the second. Saponification, solvent fractionation and crystallisation remove wax esters, hydrocarbons and soaps; a longer fractionation raises the total and shifts the profile. Granulation is a finishing step that changes particle size and flow, and it can change the moisture result without changing the chemistry. The melting point is a mixture property and a useful trend line. A lot at 79 °C and a lot at 81 °C can both meet the range; a drift toward the lower edge can point to residual esters, soaps or solvent, while a narrow result at the upper edge can point to a more octacosanol-rich fraction. Colour is weaker: white to off-white is a wide window, and a darker lot can reflect a hot hold or a different drying step while the assay passes. ## When an outside laboratory is warranted An outside test is worth ordering for a new source, a first regulated-market shipment, a profile claim absent from the supplier's certificate, or a contested lot. The panel should not simply repeat the certificate. It is a GC-FID profile with reference alcohols and an internal standard, melting point by a named method, moisture, ICP-MS for the heavy-metal panel, and microbiology. FTIR against a reference can confirm a wax alcohol mixture, and XRD can check the solid form; ask for the detection limit for each screen. Chain of custody matters. The sample tested should be the sample retained, and the report should identify the lot. If a result is contested, send the referee the retained sample, the supplier's certificate and the specification, and request the tests that discriminate between source profiles, not another total. ## Comparing two suppliers Compare six things: the source; the total and how it was calculated; the octacosanol share and its basis; the peak list; the melting point and its method; contaminants, microbiology and pack. Two quotations that agree on 90% but differ on source or on the octacosanol basis are not describing the same powder. Lines to compare on two policosanol quotations | Line | Why it decides the comparison | Source | Sugarcane, rice bran and beeswax give different alcohol distributions | Total and basis | Sum by internal standard or by area normalisation | Octacosanol share and basis | Read against the total or against the powder | Full profile | C26, C28, C30 and the C32–C34 tail | Melting point | Range and method | Contaminants and pack | Element results, microbiology, pack and lot code The catalog values are on the policosanol product page. The tests that separate a mixture from a single alcohol appear on the identity page and in the level-four comparison. The methods library explains the GC separation, and the quality page describes how a lot is released. ### 02 Policosanol grades: source, profile and octacosanol share URL: https://nutrition.rainwoodbio.com/products/specialty/policosanol/grades/ Reviewed: 2026-11-19 Policosanol is sold by source and by profile, not by a single purity number. Sugarcane wax, rice bran wax and beeswax yield different distributions of C24–C34 alcohols, and a 90% total with a 60% octacosanol share from one source is not the same material as a 90% total from another. The grade decision is therefore a source decision plus an octacosanol-share decision. In one lineThe grade is the source plus the profile: sugarcane, rice bran and beeswax give different alcohol distributions, and the octacosanol share is what the specification should name. ## A mixture has no single assay to grade on The 90% figure is a sum of alcohol peaks, and two lots can both meet it with different proportions of C26, C28 and C30. One may be octacosanol-dominant, the other richer in triacontanol; both can be called policosanol 90%. The number alone does not tell a formulator which powder is in the drum, and it does not tell a label reviewer whether the declared ingredient matches the material. The grade is not a ladder from a low percentage to a high one. It is a set of source profiles that meet different labels. A sugarcane-derived concentrate, a rice bran-derived concentrate and a beeswax-derived concentrate are three starting points, and the refining sequence then decides how much of the non-alcohol wax is removed. A buyer who orders “policosanol 90%” without a source and an octacosanol share has specified one number out of four. ## The three sources side by side Alcohol profiles by source: what the certificate should show | Source | Typical dominant alcohols | Profile character | What to watch | Sugarcane wax | C28 octacosanol, then C30 triacontanol and C26 hexacosanol | Usually the highest octacosanol share of the three | Wax refining; residual solvent; granulation | Rice bran wax | C28, C30 and C32 in variable proportions; some lots are triacontanol-rich | Octacosanol present, not always dominant; fractionation sets the share | Rice bran oil co-product; ferulate esters are a separate stream; check the C28/C30 ratio | Beeswax | C24–C34, often triacontanol-rich | Broader profile, lower octacosanol share | Requires hydrolysis; ester and odour removal The table is qualitative on purpose: the certificate should carry the measured numbers, not a source average. The same source can produce a different profile from a different refiner, and the same refiner can shift the profile when it changes the fractionation. The catalog's ≥60% octacosanol share is a specification the refiner has to meet, not a property of every wax; the certificate should show the measured result. Rice bran is also the source of gamma-oryzanol, a ferulate ester stream that is a different product with a different assay; the two should not be confused when a rice bran wax lot is described. ## Melting point, solubility and the powder The catalog form is a white to off-white powder with a melting point of 78–82 °C. It is insoluble in water and soluble in ethanol and in warm fats and oils. The melting range is a mixture property: it is not sharp like a pure compound, and both edges are part of the specification. A narrow result at the upper edge points to a more octacosanol-rich fraction; a result at the lower edge points to more C26 or C30, or to residual esters, soaps or solvent. The melting point is a fingerprint, not a purity assay. Particle size and granulation are separate decisions. The catalog powder can be granulated on request for flow, dust control or tablet compression, and a granulated grade needs its own total and profile because a carrier or a binder changes the mass per gram. Granulation does not change the chemistry, but it changes the fill weight, the disintegration behaviour and the appearance of the finished dose. The melting range also matters in processing. A melt held above 82 °C and then cooled sets into a waxy solid, and the cooling rate changes the crystal size and the flow of the solidified material. A process that heats policosanol should state the hold temperature and the cooling step, not only the storage condition. ## The label figure and the dosage form Capsules, tablets and powder blends are the usual formats. The label should be built on the measured total, not on the assumption that 90% means a full 900 mg of alcohols in every gram after granulation or blending. A 500 mg capsule of a 90% powder carries 450 mg of total alcohols; at a 60% octacosanol share of the total it carries 270 mg of octacosanol, while a 60% share of the powder would give 300 mg. The certificate's basis decides which arithmetic applies, and the label should use the same basis. That arithmetic is a label exercise, not a dose recommendation. The point is that the declared policosanol and the declared octacosanol have to come from the same profile, and a switch of source or granulation can move both figures without a change in the product name. A diluted grade changes the mass per capsule again, and a formulator who keeps the old fill weight will under-deliver the declared alcohol figure. The lipid story is claim-sensitive, and the label wording is a separate review from the specification. The compliance page sets out the documents and the route question; the specification should not be written around a claim. ## What to write into the specification - “Policosanol, mixed primary aliphatic alcohols, CAS 142583-61-7; octacosanol component CAS 557-61-9; source: sugarcane, rice bran or beeswax.” - “Total policosanol ≥90.0% by GC-FID, sum of C24–C34 alcohols; method, column and reference standards named.” - “Octacosanol share ≥60% by GC; state whether the figure is read against the total alcohol fraction or the powder.” - “Full alcohol profile with C26, C28, C30 and the C32–C34 tail reported, not only the total.” - “Melting point 78–82 °C by a named method; moisture ≤1.0%.” - “Heavy metals and microbiology as listed; particle size or granulation if the dosage form needs it.” - “Source and specification version under change control.” We supply the mixture. A single-alcohol octacosanol grade is a separate purchase with its own assay and label; substituting it needs a written change control. ## When another grade is the wrong buy If the label names octacosanol as the ingredient, a policosanol mixture is not a drop-in: the declared substance and the weighed substance would differ, even if the octacosanol figure is close. If the market file or the customer statement names a source, a switch from sugarcane to rice bran or beeswax is a specification change, not a supply convenience. If the dosage form needs a free-flowing granule, the standard powder may flow poorly and segregate in a blend. The reverse is also true. A buyer who needs the mixture for its natural profile should not accept a single-alcohol grade as “the same thing at a higher percentage”. The catalog values are on the policosanol product page; the level-four comparison sets out the mixture against the single alcohol; the COA page shows how the profile is reported; the quality page covers the release workflow. ### 03 Policosanol stability: heat, moisture and the physical form URL: https://nutrition.rainwoodbio.com/products/specialty/policosanol/stability/ Reviewed: 2026-11-19 Policosanol is a saturated long-chain alcohol mixture with a melting range of 78–82 °C. It is chemically stable as a dry solid, but heat near the melting range, moisture on the powder and repeated melt cycles change its physical form and can move the assay. There is no aqueous solution to stabilise because the material is insoluble in water; warm oils and ethanol are the relevant solvents. In one linePolicosanol has no aqueous solution to stabilise: heat near its melting range, moisture on the powder and the physical form of the blend decide the shelf life. ## The powder: moisture, heat and colour The catalog sets moisture at ≤1.0%. That limit is a release gate, not a storage allowance. The powder is hydrophobic, so it does not dissolve in humid air, but the particle surfaces can hold moisture and the powder can cake under its own weight. A sealed foil pouch, a closed liner and a dry store are the practical controls, and an opened pouch should be resealed or transferred to a smaller opaque container. A dry store below 30 °C is comfortable for the packed material. A warehouse at 40 °C is still well below the melting range, but it accelerates caking and any slow surface oxidation, and it makes the pack less forgiving when a pallet sits in a hot loading bay. After cold storage, let the pack reach room temperature before opening so condensation does not form on the powder. Light is a secondary risk: the concern is colour and odour drift rather than a rapid loss of assay. The foil pouch already blocks light, and an opaque container keeps that protection after opening. Colour is a weak release test on its own, but a batch that darkens in storage is telling the reader that the pack or the temperature history was wrong. ## There is no aqueous solution; there is a melt Policosanol is insoluble in water and soluble in ethanol and in warm fats and oils. An aqueous dispersion needs an emulsifier and high shear; it is not a solution, and it should not be described as one. The stability question for a beverage or a liquid blend is therefore the stability of the emulsion, not the solubility of the alcohol mixture. The melt is the format that matters in processing. Above 82 °C the powder becomes a liquid; on cooling it sets into a waxy solid, and the cooling rate changes the crystal size, the flow and the appearance. A melt held hot for a long time can darken or develop an odour, and a melt that is cooled too quickly can set into a hard mass that is difficult to mill. The process should state the hold temperature, the hold time and the cooling step, not only the storage condition. An ethanol stock is the other route. It dissolves the mixture, but the solvent evaporates, it is flammable, and any ethanol used in production becomes a residual-solvent question for the regulatory file. A stock solution is a process intermediate, not a storage format for the ingredient. ## What drives change Factors that move policosanol during storage and processing | Factor | What it does | Control | Heat near or above 78–82 °C | Melts, sinters and cakes on cooling | Keep below the melt; control the melt hold | Moisture | Surface moisture, caking, lower as-is assay | Sealed pack; ≤1.0%; dry store | Oxygen and a long hot hold | Colour and odour drift; slow surface oxidation | Low headspace; short hot hold | Light | Colour drift | Opaque or foil pack | Compression and shear | Particle size, flow and tablet hardness | Specify granulation and particle size | Time in storage | Caking and physical aging | Retest period; retained sample These factors interact. A warm, humid store softens the surface of the particles, and the powder that was free-flowing at release can cake in the drum. A melt that is hot and open to air combines heat and oxygen in the same step. The useful question is not whether policosanol is stable, but in which pack, at which temperature and for how long. ## A stability protocol for the ingredient The protocol names the pack, the condition, the time points and the tests. For the warehouse, use 25 °C/60% RH long-term and 30 °C/65% RH intermediate; 40 °C/75% RH is the accelerated condition that stresses the pack. All three are below the melting range, so add a heat-cycle arm that takes the material above 82 °C, holds it and cools it; that step is the one most likely to change flow and colour. Test total policosanol by GC, the octacosanol share, melting point, moisture, appearance and microbiology at each point. For a capsule or tablet, repeat the work in the finished matrix; for an oil suspension or an emulsion, test the matrix as well as the powder. Report each result, not only a pass statement, and identify the pack and the lot family. The summary must cover the pack you are buying. A 1 kg pouch and a 25 kg fiber drum have different headspace, different opening histories and different thermal inertia; the data belongs to the pack, not to the product name in general. ## The finished formula changes the answer Capsules and tablets have low water activity, but shells and excipients can still move moisture, and compression alters the particle surface. Check moisture at release and after storage, and check the appearance and the hardness of the dose. A powder blend adds segregation risk: a dense, waxy powder and a light carrier can separate in a drum, so the blend needs a particle-size specification and a mixing check. An oil suspension heats the policosanol into solution and then cools it; the recrystallised solid can settle, and the suspension needs a viscosity and a redispersion check. An emulsion adds an emulsifier and a homogenisation step, and its stability is a separate study. In every format, an overage does not repair a melt that degraded the colour or a pack that let moisture in. ## How the shelf life is set No single shelf-life number is published for policosanol; the pack, the condition and the physical form set it. The specification carries the assigned retest period, backed by stability data for that pack and condition. A number with no pack, condition or test panel is an assumption, not a shelf life. After the retest period, re-assay the retained sample before extending use. Never extend by assumption, and never apply a bulk figure to a repacked or granulated container. The standard packs are listed on the policosanol product page; the COA page covers release tests; the MOQ page covers pack and lead time; the methods library describes the GC assay; the quality page describes how a lot is released. ### 04 Policosanol: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/specialty/policosanol/moq/ Reviewed: 2026-11-19 Policosanol starts at 1 kg in a foil pouch, with a 25 kg fiber drum as the bulk pack; standard lead time is 1–7 days. A quotation becomes comparable when it states the source, the total and octacosanol figures with their basis, the quantity and pack, the destination and delivery term, the documents and the destination market. In one lineOne kilogram is the trial pack and the qualification sample; the 25 kg fiber drum is the production unit, and both must carry the same source and profile. ## Why the minimum is 1 kg A policosanol lot is qualified on its alcohol profile, not on a single assay, so the sample has to be large enough for a trial batch, a retained sample and an independent GC check. One kilogram covers those three uses without splitting a bulk drum. It also travels as a parcel, which helps when a formulator needs powder before the production plan is fixed. Under 1 kg, material is normally split from a larger lot and repacked. Handling goes up, the original pack identity is lost and traceability weakens, while the chemistry stays the same. The 25 kg drum suits production: less handling per kilogram, but more stock and a longer storage window. The minimum is about pack size and traceability, not volume. ## Packs and formats Policosanol pack options | Pack | Fill | Use | Handling | Foil pouch | 1 kg | Trial, sample, small runs | Moisture barrier; reseal; keep cool | Fiber drum | 25 kg | Production | Lined; lot code repeated on drum | Granulated form | Made to order | Flow and dust | Particle size and fill weight shift Granulation changes the specification; it is not merely a packing option. Particle size, flow and fill weight all move, and a granulated grade needs its own total and octacosanol profile because a carrier or binder changes the mass per gram. If the dosage form calls for a coarser or more free-flowing powder, raise it before the quotation; the specification and possibly the lead time will change. The melting range also belongs in the shipping instructions. A drum left in a hot container can cake or sinter even though the ambient temperature never approaches a flame; the material softens near 78 °C, and a closed container in strong sun can get close to that. Keep the pack shaded and ventilated in transit. ## Lead time and dispatch Standard packs are quoted at 1–7 days after order confirmation. That covers picking, documents and dispatch, not transit, customs or the customer's quality release. A custom granulation, a source-specific lot or a non-standard pack adds time, and the quotation should list it separately. Ask for the dispatch date, not only the lead time. A drum can move on a pallet and a pouch as a parcel; the Incoterm assigns freight booking and customs entry. The documents should travel with the lot, and the lot code on the packing list should match the certificate. ## What a quotation needs A quotation becomes comparable when it states six things: - Product, source and specification version. Policosanol from sugarcane, rice bran or beeswax, with the source written out and the version identified. - Total and octacosanol figures. The total by GC, the octacosanol share and the basis for each figure. - Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated variant. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, TDS, SDS, source statement and any market-specific declaration the importer needs. - Intended use and market. Whether the use is a supplement, a food or something else, and the market of sale. A quotation without the source and the octacosanol basis is incomplete. Three different powders can share a 90% total, and the documents are part of what is being sold. Commercial terms are not published here; they appear on the quotation. ## Qualifying a lot, not demonstrating a powder The 1 kg pouch is the pack used to qualify a lot. Before scaling, test the GC profile, melting point, moisture and microbiology, and retain material from that same pack. The lot code on the sample, the COA and the quotation should match. Without a lot code, a sample is a demonstration rather than a qualification. Ask before ordering if a bench trial needs less than a kilogram. A split from bulk is a repack with separate traceability, not the catalog pack, and the paperwork should say so. A bench sample and a production drum may not share a lot; qualify the profile you will actually buy. For a mixture, the sample is also the chance to check the octacosanol basis. Ask the supplier to mark on the certificate whether the 60% share is read against the total alcohol fraction or against the powder, and compare that with the label arithmetic. A sample with a clear profile is worth more than a larger sample with a vague one. ## Commercial and quality terms The quotation should state the commercial terms, name the Incoterm, and give the pack, lead time and documents. Beside them sit the quality terms: which specification revision applies, the COA for each lot, the retained sample, the retest period and how a change is controlled. Settle the quality agreement before the first production order, not after a dispute. A change of source is a change of specification. Sugarcane, rice bran and beeswax do not give the same profile, so a supplier that switches source without notice has changed the material even if the total stays at 90%. The agreement should require written notice and a new certificate before the first affected shipment. The quotation and the quality agreement govern returns and replacements. If a lot fails the agreed specification, use the retained sample and a joint re-test, not a photograph. Agree who pays for the referee test and which laboratory both sides accept. The catalog values are on the policosanol product page; the COA page lists the release tests; the compliance page covers the market files. The MOQ glossary entry defines the term, and the quality page describes how a lot is released. ### 05 The regulatory file for policosanol URL: https://nutrition.rainwoodbio.com/products/specialty/policosanol/compliance/ Reviewed: 2026-11-19 Policosanol is supplied as a mixture of long-chain primary alcohols, with the source named on the specification. The catalog specification is where the file starts; the route is then built around the source, the profile, the destination and the finished product. The buyer's regulatory team confirms that route. The page lists the documents and checks the file needs; it makes no claim that the material is authorised in any market. In one lineThe specification describes the mixture; the regulatory file shows the route, the limits and the label for the destination, and the lipid story is reviewed by the buyer's regulatory team. ## What the file contains Four practical questions sit behind a complete file. What is the material, and which specification version is being bought? Which lot is being released, and what does its certificate report? What limits and label rules govern the finished product? And what changes if the source, the process or the pack changes? The COA covers the lot, the TDS covers the specification, and the SDS covers handling. No single one of them settles the route. The file should also contain the source statement, the allergen and GMO statements, the origin record, the residual-solvent statement and any customer-specific declaration. If a statement is missing for the lot, say so before the order rather than at the port. A versioned document list beats a folder of undated PDFs. ## European Union The EU framework is general food law (Regulation (EC) No 178/2002), food information to consumers (Regulation (EU) No 1169/2011), contaminants (Regulation (EU) 2023/915) and food supplements (Directive 2002/46/EC). Those instruments sit alongside any product-specific route. Whether policosanol needs such a route depends on the source, the process and the market history of the exact material, and the position may not be the same for a sugarcane concentrate, a rice bran concentrate and a beeswax-derived alcohol mixture. Some markets have a product-specific entry for this form; confirm the current text and conditions rather than assuming that an entry exists or that it covers the source in hand. The file should name the source and the specification version, because a route that covers one profile does not automatically cover another. As of this review, the current consolidated text is the reference, not a summary. ## United States For the US, the file turns on what the dietary ingredient or food substance is and how it will be used. The supplier should identify the basis and the document behind it; the buyer checks that it covers the finished product and the claim. The Supplement Facts panel, the ingredient name and the claim are reviewed apart from the certificate; a compliant lot can still fail the label review. Current good manufacturing practice for dietary supplements (21 CFR 111) applies to the finished product, not to the drum alone. The buyer's quality team should confirm that the supplier's certificate, the identity test and the label all describe the same material. The US route is not asserted here; the buyer's regulatory team confirms it for the destination and the finished product. ## Contaminants and limits Contaminants are calculated on the finished product, not only measured in the drum. The table below gives the catalog limits for the ingredient and the evidence the file should carry. The destination text and the daily dose set the final limit; a lot that passes the ingredient gate can still exceed the finished-product limit once the dose is applied. Catalog limits and the evidence the file should carry | Parameter | Catalog limit (ingredient) | What the file should show | Lead (Pb) | ≤3 mg/kg | Measured value, method and the calculation at the finished dose | Arsenic (As) | ≤2 mg/kg | Measured value, method and the destination limit | Cadmium (Cd) | ≤1 mg/kg | Measured value and any category exception | Mercury (Hg) | ≤0.1 mg/kg | Measured value and method | Moisture | ≤1.0% | Measured percentage on the lot COA | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Counts and absence statement Each heavy metal needs its own line. A single “heavy metals” total hides the element that matters, and a “not detected” line without a detection limit is evidence about the method, not about the sample. The moisture figure should be read with the total policosanol result: a high moisture lot can pass the alcohol sum on a dry basis and still deliver less material per gram. ## Claims and the label The lipid story is claim-sensitive. Policosanol has been discussed in connection with lipid-related health claims, and that is exactly the area where a label wording can move from a permitted statement to a disease claim with a small change of language. No lipid-related health claim is made on this page, in the specification or on the certificate. The buyer's regulatory team reviews the wording for the destination, the dose and the finished product. In the EU, nutrition and health claims are governed by Regulation (EC) No 1924/2006 and the associated lists; a claim that is not on the permitted list is not made permissible by the ingredient's history. Under DSHEA, structure-function wording and disease wording are treated differently; the label and the claim are reviewed apart from the certificate. The supplier can provide the specification and the lot data; the claim decision belongs to the brand and its reviewer. The label also has to name the material correctly. “Policosanol” and “octacosanol” are different ingredient names, and the declared quantity has to match the material and the profile. If the label names the single alcohol and the drum holds the mixture, the label is wrong even when the octacosanol figure matches. ## The document set Documents in a policosanol regulatory file | Document | What it shows | When needed | Specification / TDS | Source, alcohol profile and release limits | Every quotation and every market file | COA | Lot results against the specification | Every lot | SDS | Handling, storage and transport information | Every shipment | Source statement | Sugarcane, rice bran or beeswax | Every market file | Allergen and GMO statement | Status of the source and the process | Where the destination or the customer requires it | Residual-solvent statement | Solvents used in refining | Where ethanol, hexane or another solvent is used | Change-control record | Source, process or pack changes | Before the first affected shipment ## Checklist before the first order - Specification version, source and the exact alcohol profile are named. - COA, TDS, SDS, source, allergen, GMO, origin and residual-solvent statements are on file. - Contaminant figures are recalculated at the finished-product dose. - Label and claim have been checked for the destination. - The source, process and pack are under change control. - Quotation, specification and certificate carry the same version. The catalog values are on the policosanol product page; the COA page explains the lot certificate; the identity page covers the analytical evidence. The quality page describes the release file, and the EU regulatory note sets out the framework. ### 06 How we prove a policosanol lot is the mixture it claims URL: https://nutrition.rainwoodbio.com/products/specialty/policosanol/identity/ Reviewed: 2026-11-19 A policosanol lot is the mixture it claims when four lines agree: the document names the source and the alcohol profile, the GC chromatogram shows the C24–C34 alcohols against reference standards, the octacosanol share matches the specification, and the melting point and moisture agree with the profile. The total alone cannot separate a sugarcane mixture from a rice bran mixture or from a spiked octacosanol blend. In one lineIdentity is the chromatogram plus the thermometer: a full alcohol profile against standards, the octacosanol share and a melting point that agrees with the mixture. ## The four identity layers A certificate may name the correct material without proving it. The four layers below are separate questions, and each one needs its own evidence. An answer to the first question alone describes paperwork, not powder. Four layers of policosanol identity | Layer | Question | Test | What it establishes | Document | Is the source and the profile named? | Name, source, specification version | Paperwork only | Chromatogram | Which alcohols are present, and in what proportion? | GC-FID full profile against reference alcohols | The mixture | Share | Is octacosanol the majority alcohol? | C28 peak against the declared basis | The label ratio | Thermal and mass balance | Does the solid agree with the profile? | Melting point, moisture, total | Consistency of the numbers ## The octacosanol share is a ratio, not a purity Octacosanol is the C28 primary alcohol, CAS 557-61-9, formula C28H58O, molecular weight 410.76. The 60% figure is a share, and the certificate should say whether it is read against the total alcohol sum or against the powder. The difference is material: a lot at 90% total with a 60% share of the total carries 54% octacosanol by mass, while a 60% share of the powder carries 60%. Both can be described as “60% octacosanol” in a sales message, and they are different powders. The chromatographic calculation has its own assumptions. Flame-ionisation response is roughly proportional to carbon mass within a homologous series, so area percentage is a reasonable approximation of mass percentage for the C24–C34 alcohols. It is still an approximation, and a method that uses reference standards and an internal standard is stronger than one that normalises the peaks. Area normalisation on a sample with non-eluting wax or solvent can overstate the share because the denominator is only the material that reached the detector. A share can also be inflated by spiking. A lot built from a different wax and topped up with octacosanol can hit the 60% figure while the C26 and C30 peaks fall away from the source profile. The full chromatogram catches that; a single octacosanol number does not. Ask for the peak list and the reference standards, not only the percentage. ## XRD is a supporting check, not a purity assay X-ray diffraction answers a different question: is the solid crystalline, and does its pattern match a reference? Long-chain alcohols pack in layered crystals, and a mixture gives a pattern dominated by the majority alcohol plus the other components. It separates a crystalline alcohol mixture from an amorphous carrier or a waxy blend, and it can compare two sources. It is not a composition assay and it does not measure the octacosanol share. For a disputed lot, XRD plus the GC profile plus the melting point is stronger than any one of them. Before accepting a “match”, request the reference pattern and the detection limit. “XRD conforms” with no pattern and no reference adds little. The melting point is the routine thermal check; XRD is the method to reach for when the solid form, not the assay, is the question. ## Where substitutions show up Substitution signals in a policosanol lot | Substitute | Effect | Signal | Check | Stearic acid or another fatty acid | Adds mass that is not a long-chain alcohol | Low melting point; extra peaks; acid value | GC with acid and alcohol separation; acid value | Octacosanol spiking | Raises the C28 share above the source profile | C26 and C30 low against C28; high, narrow melting point | Full GC profile; melting point | Another vegetal wax | Changes the C26, C30 and C32 pattern; adds esters | Extra peaks; ester or soap residue; source mismatch | GC, FTIR, source audit | Moisture | Lowers the as-is total | Moisture high; total low | Karl Fischer; mass balance | Residual solvent | Adds mass that is not an alcohol | Odour; headspace peak | Residual-solvent GC Colour proves the least. White to off-white covers a wide window, and a bleached or recrystallised lot can look the same as a clean one. The stronger signals are the full profile, the octacosanol basis and the melting point. A certificate that reports appearance and a total but not the peak list has left the most likely substitution untested. ## How to write identity into the specification - “Policosanol, mixed primary aliphatic alcohols, CAS 142583-61-7; octacosanol component CAS 557-61-9; source: sugarcane, rice bran or beeswax.” - “Total policosanol ≥90.0% by GC-FID, sum of C24–C34 alcohols; method, column and reference standards named.” - “Octacosanol share ≥60% by GC; state whether the figure is read against the total alcohol fraction or the powder.” - “Full alcohol profile with C26, C28, C30 and the C32–C34 tail reported.” - “Melting point 78–82 °C by a named method; moisture ≤1.0%.” - “No dilution or single-alcohol spiking above the declared profile.” - “Source and specification version under change control.” ## Five questions for the supplier - Which source is this lot, and can you provide the full GC profile with retention times and reference alcohols? - Is the 60% octacosanol share read against the total alcohol fraction or against the powder? - What is the melting point, and which method produced it? - What are the moisture and total policosanol values for this lot, and how was the total calculated? - For a disputed lot, would you join a re-test on the retained sample? Those five answers together form an identity file. A single total percentage does not. The catalog values are on the policosanol product page; the COA page maps each figure to its certificate line; the grades page compares the sources; the level-four comparison separates the mixture from the single alcohol; the methods library explains the GC separation. ### 02.1 Policosanol vs octacosanol: the mixture against the single alcohol URL: https://nutrition.rainwoodbio.com/products/specialty/policosanol/grades/policosanol-vs-octacosanol/ Reviewed: 2026-11-19 Policosanol and octacosanol are not two grades of the same specification. Policosanol is a mixture of long-chain primary alcohols, usually C24–C34, in which octacosanol is the largest single alcohol in the catalog grade; octacosanol is a single C28 alcohol with CAS 557-61-9, formula C28H58O and molecular weight 410.76. The catalog carries the octacosanol CAS because that is the alcohol the specification names; the mixture itself is registered as 142583-61-7, and the two numbers identify different things. In one linePolicosanol is a mixture specified by its alcohol profile; octacosanol is one molecule specified by its own CAS, formula and purity, and the two are not interchangeable on a label. ## What policosanol is Policosanol is a family of primary aliphatic alcohols, mostly even-numbered, recovered from a wax. The catalog specification is a total of at least 90% by GC, with octacosanol at a share of at least 60%. Those two numbers describe a concentrate: the alcohol fraction is the majority of the powder, and octacosanol is the majority of that fraction. They do not describe a single substance, and they do not make the powder a diluted octacosanol. The source decides the rest of the profile. Sugarcane wax, rice bran wax and beeswax give different proportions of C26, C28, C30 and the C32–C34 tail, and the refining sequence decides how much wax ester, hydrocarbon and soap remains. A certificate that names only octacosanol has described one peak of a mixture and has left the specification incomplete. ## The two materials side by side Policosanol mixture against octacosanol single alcohol | Property | Policosanol | Octacosanol | CAS number | 142583-61-7 (mixture); certificates often also carry 557-61-9 for the octacosanol component | 557-61-9 | Formula | No single formula; C28H58O is the octacosanol component | C28H58O | Molecular weight | No single value; the octacosanol component is 410.76 | 410.76 | Composition | C24–C34 alcohols; octacosanol at ≥60% share | One alcohol | Assay | Sum of alcohol peaks by GC; ≥90% total | Single peak by GC | Melting point | 78–82 °C | Higher and narrower | Label name | Policosanol, usually with the source | Octacosanol | Source | Sugarcane, rice bran or beeswax | Isolated from an octacosanol-rich wax fraction The table is a specification comparison, not a ranking. A higher octacosanol figure is not automatically the right purchase if the label and the formula call for the mixture; a mixture is not automatically the right purchase if the label names the single alcohol. ## Two assays, two questions The policosanol assay sums the alcohol peaks and reports the total. The octacosanol assay measures one peak and reports its purity. Both use GC with flame-ionisation detection and both need reference standards, but the number means something different in each case. A policosanol total of 90% says that the identified alcohols are 90% of the powder. An octacosanol purity of 90% says that the single alcohol is 90% of the powder. The first number includes the second; the second says nothing about the other alcohols. Read the octacosanol share on a policosanol certificate carefully. A 90% total with a 60% share of the total is 54% octacosanol by mass; a 60% share of the powder is 60%. The certificate should state the basis, and the buyer should compare quotations on the same basis. A policosanol certificate that reports “octacosanol 60%” without the total and the basis has not given a specification. The methods also differ in what they can detect. A single-peak octacosanol assay is a purity test and will show other alcohols as impurities if the method resolves them. A policosanol total is a composition test, and it will show a missing C26 or C30 peak that a single-peak assay would not look for. The method should match the question being asked. ## The melting range tells the mixture apart The policosanol mixture melts over 78–82 °C. The range is wide because the mixture contains several alcohols with different chain lengths; a pure alcohol melts at a higher, narrower point. That difference is useful in identity work: a lot that melts like a pure compound but is sold as a mixture should be checked for spiking, and a mixture that melts at the lower edge may carry more C26 or C30, or residual esters and soaps. The melting point is a fingerprint, not a composition assay. It cannot tell a sugarcane profile from a rice bran profile on its own, and it cannot measure the octacosanol share. It can confirm that the solid is consistent with the profile, and it can flag a lot that has been diluted or spiked. For a disputed lot, read it beside the full GC profile, not instead of it. The melt step in processing follows the same numbers. The mixture softens and melts below 82 °C; the single alcohol needs a higher temperature and gives a narrower window. A formulator switching from one to the other should recheck the heating step, the hold time and the cooling profile, because the physical form of the solidified material will differ. ## What the label has to name “Policosanol” and “octacosanol” are different ingredient names. A product made from the mixture should declare policosanol, with the source where the market or the customer requires it. A product made from the single alcohol should declare octacosanol. If the label names the single alcohol and the drum holds the mixture, the label is wrong even when the octacosanol figure matches, because the declared substance is not the substance being weighed. The quantity has to follow the same logic. If a formula is built to deliver 20 mg of octacosanol, a policosanol lot at 54% octacosanol by mass needs 37.0 mg of powder, while a lot at 60% needs 33.3 mg. Those are label arithmetic, not a dose recommendation. The certificate's basis, the label's declared ingredient and the weigh-up should all use the same figure. The lipid story is claim-sensitive, and the ingredient name is part of the claim review. The compliance page sets out the documents and the route question; the label wording is reviewed by the buyer's regulatory team for the destination. ## When to choose which Choose policosanol when the ingredient is the mixture, when the source profile is part of the specification, and when the label names policosanol. It is the material with the natural alcohol distribution and the longer compositional file. Choose octacosanol when the label and the specification name the single alcohol, and when the buyer wants a single-peak purity figure instead of a profile. Neither is a drop-in for the other. The mass per serving, the label name, the melt step and the regulatory file all change with the switch. A buyer who needs the mixture should not accept the single alcohol as “the same thing at a higher percentage”, and a buyer who needs the single alcohol should not accept the mixture and adjust the number afterwards. The catalog values are on the policosanol product page; the grades page widens the view to the three sources; the COA page shows how the total and the share are reported. The gamma-oryzanol page covers the rice bran ester stream, a different product; the methods library describes the GC separation. ### 01 What the COA for SAMe disulfate tosylate actually contains URL: https://nutrition.rainwoodbio.com/products/specialty/same/coa/ Reviewed: 2026-11-19 A SAMe certificate opens with appearance and identity, then reports assay by HPLC as the disulfate tosylate salt, water by Karl Fischer, pH of the 5% solution, the heavy-metal panel and microbiology. Two further pieces of information make the assay readable: the salt factor that converts the salt result to the SAMe parent, and the counter-ion evidence for sulfate and tosylate. The catalogue limits are release gates; the batch certificate is the record for one pack. In one lineThe 97.0% assay is expressed as the disulfate tosylate salt, so the salt factor, the water and the counter-ion evidence belong on the same certificate. ## The certificate as a lot record A SAMe certificate is useful when a reviewer can follow every line from method to limit to result. The identity line says which salt was tested; the assay line says how much of that salt is present; the water line says how much of the powder is not the salt. The catalogue grade is the disulfate tosylate, salt CAS 97540-22-2, with the SAMe parent at CAS 29908-03-0. A certificate that names only “SAMe” leaves the reader to guess which salt was weighed. Tests on a SAMe disulfate tosylate certificate | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | HPLC retention time plus UV scan | Matches the reference standard | Assay (as the salt) | HPLC with UV detection | ≥97.0% | Water | Karl Fischer titration | ≤5.0% | pH (5% solution) | pH meter at 20–25 °C | 2.0–4.0 | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Aerobic plate count; enrichment for absence | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Related substances | HPLC, peak area | Reported against the limit agreed in the specification | Counter-ions | Ion chromatography and HPLC | Sulfate and tosylate present in the expected ratio The catalogue lines run from appearance to microbiology; related substances and counter-ions are added when the file or the customer requires them. ## 97.0% as the salt, not as the base The assay is written as the salt because the salt is what the laboratory weighs and what the customer buys. SAMe disulfate tosylate has a formula weight of 766.80, while the SAMe parent (C15H22N6O5S) is 398.44. The ratio is 398.44 ÷ 766.80 = 0.5196, so a 100% salt would contain about 52.0% SAMe by mass. A 97.0% salt result is about 50.4% SAMe. A formulator who reads 97.0% as “97.0% SAMe” overstates the active mass by nearly a factor of two. A buyer who compares a disulfate tosylate result with a butanedisulfonate result without the factor is comparing different denominators. The water result belongs next to the assay. The limit is ≤5.0% by Karl Fischer, and a lot with 4.0% water and a 95.0% as-is result reads 98.96% on the dry basis. The basis belongs in the assay row itself, not in a footnote. The assay method is HPLC with UV detection. The adenine ring absorbs around 260 nm, so the chromatogram shows the SAMe peak and any related substances that share the chromophore. The method should name the column, mobile phase, detection wavelength and standard; identity needs retention and spectrum, not only the percentage. ## Release limit against batch result The release limit is the boundary the lot must meet; the batch result is what the laboratory measured. A certificate that copies the specification range into the result column has repeated the gate instead of reporting a result. What the result column should show | Parameter | Release limit | Result column | Assay | ≥97.0% as the salt | The result in %, with the basis and method named | Water | ≤5.0% | A measured percentage by Karl Fischer | pH | 2.0–4.0 at 5% | A measured pH with the concentration stated | Heavy metals | Per element | A figure in mg/kg for each element, not a single total | Microbiology | Counts and absence | The count plus the absence statement for the lot | Related substances | Agreed limit | The individual peak result, with the limit beside it “Conforms” is a conclusion, not evidence. For heavy metals the evidence is a result per element; for microbiology it is a count and an absence statement; for related substances it is the peak table. The main degradant of SAMe is methylthioadenosine, and a total impurity figure hides how much of it is present. ## Where batches can differ Fermentation, isolation and drying move the water, the colour and the residual related substances. Salt formation moves the counter-ion ratio: a lot short on tosylate or sulfate is not the same salt, even when the SAMe peak area looks acceptable. Granulation, when requested, changes flow and bulk density without changing the chemistry. Signals of a moving SAMe lot | Observation | Likely cause | Check | Water climbing toward 5.0% | Drying or pack exposure | Karl Fischer on a fresh, unopened pack | Assay as-is falling, dry-basis steady | Moisture pickup | Water result and the assay basis | New peak near the SAMe peak | Methylthioadenosine or another degradant | Related-substance method and chromatogram | Counter-ion ratio off | Salt formation or blending | Sulfate by ion chromatography; tosylate by HPLC | Colour darker than the reference | Heat or hold time during drying | Appearance against a retained reference A drift across several lots is more informative than one result near an edge. Assay drifting down while water drifts up is the usual early signal of a moisture problem. A counter-ion ratio that moves without a process change calls for an audit of the salt step. The pack, the drum liner and the retained sample should carry the same lot code. ## When an outside test is worth ordering An independent test is worth ordering for a new source, a first regulated shipment, a disputed salt form, or a result the supplier's certificate cannot support. The panel is targeted: HPLC/UV for identity and assay, Karl Fischer water, ion chromatography for sulfate, HPLC for tosylate, ICP-MS for the metals, and microbiology. Specific rotation can be added when the optical form is in question. The sample should be the retained sample, and the report should identify the lot. Ask the laboratory to state its detection limit for each screen; a “not detected” line without a limit describes the method, not the sample. For a contested result, hand the referee the specification, the supplier's certificate and the retained sample. ## A supplier comparison The comparison has six lines: the salt form and both CAS numbers; the assay result and its basis; the water and pH results; the counter-ion evidence; the heavy-metal and microbiology results; and the pack size with the lot code. If two quotes agree on “97%” but split on salt form or basis, they describe different powders. The catalogue specification is on the SAMe product page. The identity page sets out the tests that tell the salt from a dilution; the salt comparison is on the salt-forms page; the storage limits are on the stability page; the market route is on the compliance page. The HPLC method note covers the assay, and the quality page describes the release workflow. The NAD+ page is a parallel case of one name covering two sale forms. ### 02 SAMe grades: the salt form is the specification URL: https://nutrition.rainwoodbio.com/products/specialty/same/grades/ Reviewed: 2026-11-19 SAMe is sold as a salt, not as the free base, and the salt is the grade. The catalogue grade is SAMe disulfate tosylate, salt CAS 97540-22-2, specified at ≥97.0% by HPLC as the salt. SAMe 1,4-butanedisulfonate, CAS 101020-79-5, is a different salt with a different formula weight per SAMe unit, a different counter-ion and a different label name. The two share the same SAMe parent; they do not share a specification. In one lineSAMe is bought as a salt, and the salt decides the CAS number, the mass per gram of SAMe and the name on the label. ## Why the sale form is a salt SAMe is a sulfonium compound: the sulfur carries a positive charge and the molecule behaves as a zwitterion. The free base is hygroscopic and degrades readily, so it is not the commercial article. Salt formation gives a solid with a defined counter-ion, a defined formula weight and a handling profile that can be specified, packed and shipped. The disulfate tosylate is the grade in this catalogue. It pairs SAMe with tosylate and sulfate counter-ions and gives a white to off-white powder that dissolves freely in water to an acidic solution. The butanedisulfonate is the other salt a buyer is likely to meet; it has its own history and its own specification. Both are SAMe salts, and neither is “SAMe” in the abstract. ## The two salt forms side by side SAMe disulfate tosylate and SAMe butanedisulfonate | Property | Disulfate tosylate | Butanedisulfonate | Salt CAS number | 97540-22-2 | 101020-79-5 | SAMe parent | CAS 29908-03-0; C15H22N6O5S; 398.44 | Same parent | Salt formula | C22H34N6O16S4 | C15H23N6O5S·C4H9O6S2·0.5 C4H10O6S2 | Formula weight per SAMe unit | 766.80 | 725.80 | SAMe content | About 52.0% by mass | About 54.9% by mass | Counter-ion | Tosylate and sulfate | 1,4-Butanedisulfonate | Assay in this catalogue | ≥97.0% by HPLC, as the salt | Separate specification | Water and pH | Water ≤5.0%; pH 2.0–4.0 at 5% | Set in its own specification | Label name | S-Adenosyl-L-methionine disulfate tosylate | S-Adenosyl-L-methionine 1,4-butanedisulfonate The formula weight row is the one that changes the arithmetic. A gram of the disulfate tosylate contains less SAMe than a gram of the butanedisulfonate, because the first salt carries a heavier counter-ion load. The assay percentage does not cancel that difference, because both assays are expressed as their own salt. ## Powder, solution and handling The catalogue form is a white to off-white, free-flowing powder. It dissolves freely in water, and the solution is acidic: the 5% solution is specified at pH 2.0–4.0. That acidity comes from the counter-ions and is part of the material, not a defect. A formulator who neutralises the solution changes the stability of the SAMe at the same time as the taste. The powder is hygroscopic. Water is specified at ≤5.0%, and the pack is the barrier: a 1 kg foil pouch for trial and small-batch work, a 25 kg fiber drum for production. A granulated variant is available on request and is a separate specification, because granulation changes flow and bulk density. The catalogue sets no particle-size band; if a fill system needs one, it is agreed as a line in the specification rather than assumed from the powder photograph. ## Dose arithmetic and the dosage form The label dose and the weigh-up use different units. A label that declares 400 mg of SAMe needs 400 ÷ 0.5196 = 770 mg of the pure disulfate tosylate salt, or about 794 mg of a 97.0% powder. The same 400 mg expressed as butanedisulfonate would need about 729 mg of the pure salt, or about 751 mg at a 97.0% salt assay. These figures are arithmetic, not a dose recommendation; the label and the finished-product file set the dose. The salt is freely soluble, so capsules, tablets and stick packs all take it. A tablet adds compression heat and a coating step; a stick pack adds an acidic taste and a seal that must survive the fill. A drink mix has the most variables: pH, water activity, heat load and hold time all act on the same molecule. The dosage form is a stability decision as well as a marketing one. The granulated variant is the practical answer when dust or flow is the problem. It is not a dilution and it is not a different salt; it is the same salt with a different particle build, and the assay, water and pH lines still apply. ## What belongs in the SAMe specification - “S-Adenosyl-L-methionine disulfate tosylate, salt CAS 97540-22-2; SAMe CAS 29908-03-0, C15H22N6O5S, 398.44; salt C22H34N6O16S4, 766.80.” - “Assay ≥97.0% by HPLC, expressed as the salt; state the water result and the basis beside it.” - “Water ≤5.0% by Karl Fischer; pH 2.0–4.0 at 5% in water.” - “Identity by HPLC retention and UV scan; counter-ion identity for sulfate and tosylate.” - “Heavy metals Pb ≤3, As ≤2, Cd ≤1, Hg ≤0.1 mg/kg; microbiology as listed.” - “Related substances, including methylthioadenosine, against agreed limits.” - “Pack, storage condition, destination market and salt name settled before ordering.” ## When switching salt is the wrong move If the label or the market file names the butanedisulfonate, the disulfate tosylate is not a drop-in. The declared ingredient, the mass per serving and the citation all belong to the other salt, and a switch made at the balance creates a label error that the assay cannot detect. The reverse is equally true. Salt switching is a change control, not a purchasing shortcut. It calls for a fresh specification, certificate and label review, plus a stability check in the finished matrix. The product hub carries the catalogue specification; the salt-forms comparison goes deeper on mass and label; the COA page shows where the salt is reported; the stability page covers the storage limits; the compliance page covers the route. The NAD+ page is a useful parallel for another specialty ingredient with more than one sale form, the HPLC method note describes the assay, and the quality page covers release and retained samples. ### 02.1 SAMe salt forms: disulfate tosylate against butanedisulfonate URL: https://nutrition.rainwoodbio.com/products/specialty/same/grades/same-salt-forms/ Reviewed: 2026-11-19 SAMe disulfate tosylate and SAMe 1,4-butanedisulfonate are two salts of the same parent, and the difference is not cosmetic. The disulfate tosylate has a formula weight of 766.80 per SAMe unit and carries about 52.0% SAMe by mass; the butanedisulfonate has a formula weight of 725.80 and carries about 54.9%. A label, a dose and a certificate written for one salt do not transfer to the other without the conversion. In one lineBoth salts deliver the same SAMe, but they deliver different masses of it per gram and they carry different names onto the label. ## Two ways to stabilise the same molecule SAMe is a sulfonium zwitterion, and the free base is not a viable commercial solid: it takes up water and degrades. Salt formation gives a defined counter-ion, a reproducible formula weight and a solid that can be dried, milled and packed. The disulfate tosylate uses tosylate and sulfate; the butanedisulfonate uses 1,4-butanedisulfonate. Both leave the SAMe molecule unchanged. The two salts have different commercial histories and are supported by separate specifications. The disulfate tosylate is the grade in this catalogue. The butanedisulfonate has been used as a medicinal substance in some markets, and it appears in supplement supply as well. Neither history makes one salt a generic substitute for the other; the identity, the mass and the market file are separate. ## The salts side by side Disulfate tosylate against butanedisulfonate | Property | Disulfate tosylate | Butanedisulfonate | Salt CAS number | 97540-22-2 | 101020-79-5 | SAMe parent | CAS 29908-03-0; C15H22N6O5S; 398.44 | Same parent | Formula weight per SAMe unit | 766.80 | 725.80 | SAMe content | About 52.0% | About 54.9% | Counter-ion | Tosylate and sulfate | 1,4-Butanedisulfonate | Assay basis in this catalogue | ≥97.0% by HPLC, as the salt | Separate specification | Water and pH | ≤5.0%; pH 2.0–4.0 at 5% | Set in its own specification | Label name | S-Adenosyl-L-methionine disulfate tosylate | S-Adenosyl-L-methionine 1,4-butanedisulfonate The table separates two materials that share a parent CAS number, 29908-03-0. The parent number identifies the SAMe molecule; it does not identify the salt. A purchase order that gives only the parent number has not specified what will be delivered. ## The assay basis is where the salts diverge Both assays are expressed as the salt, but the salts have different formula weights, so the same percentage means different amounts of SAMe. At a 97.0% assay, the disulfate tosylate delivers 0.97 × 0.5196 = 50.4% SAMe per gram of powder. The butanedisulfonate delivers 0.97 × 0.5490 = 53.3% under the same assumption. The gap is about three grams of SAMe per hundred grams of powder. The practical consequence is a weigh-up difference. A formula that needs 400 mg of SAMe takes about 794 mg of a 97.0% disulfate tosylate powder, or about 751 mg of a 97.0% butanedisulfonate powder. Those figures are arithmetic, not a dose recommendation, and they assume the same assay; the actual certificate figure replaces 97.0% in the calculation. The HPLC method adds its own variables. Detection is by UV; the adenine ring absorbs around 260 nm, and the certificate should state the wavelength used. The standard may be a salt or the free base. The certificate should say which standard was used and how the result was converted to the salt. A percentage without that statement cannot be compared across suppliers or across salts. ## Stability is measured per salt, not per name Both salts are hygroscopic and both are degradation-prone; the salt buys a defined solid, not immunity. Water uptake, pH and the rate of methylthioadenosine formation are properties of the actual salt and the actual pack. A stability study run on the disulfate tosylate does not cover the butanedisulfonate, and a study run on one pack does not cover another. The disulfate tosylate is acidic in solution, pH 2.0–4.0 at 5%. The butanedisulfonate has its own pH and its own water limit, and a formulator should not assume the two behave the same in a beverage or a wet granulation. Heat, moisture and hold time are the variables to control on both sides; the response to them is measured, not inferred from the counter-ion. The pack carries the same weight in the decision. A foil pouch and a fiber drum present different moisture barriers and different headspace, and the retest period belongs to the pack that will be opened. The stability page sets out the study design. ## The label name and the market route The label should name the salt, not only the parent. “S-Adenosyl-L-methionine disulfate tosylate” and “S-Adenosyl-L-methionine 1,4-butanedisulfonate” are different ingredient declarations, and a label that says only “SAMe” leaves the reviewer to infer which one was weighed. The declared quantity should be clear about whether it refers to the salt or to the SAMe parent. The market route is a separate question. SAMe is regulated differently from an ordinary food ingredient in some markets, and the classification has not been uniform across countries. The buyer's regulatory team confirms the route for the destination and checks that the salt named on the label is the salt the file covers. This page does not claim an authorisation for either salt in any market. ## Choosing between the two salts Choose the disulfate tosylate when the specification, the label and the market file name it. That is the grade supplied here: ≥97.0% by HPLC as the salt, water ≤5.0%, pH 2.0–4.0 at 5%, with the heavy-metal and microbiology limits on the SAMe product page. Choose the butanedisulfonate only when its own specification and its own label are in place. Do not switch salts to match a quotation, to chase a higher assay number, or to simplify a label conversion. A switch changes the salt CAS, the formula weight, the mass per serving, the counter-ion evidence and the regulatory citation at once. Write it as a change control with a new specification, a new certificate and a new label review. The grades page sets this comparison beside the catalogue range; the identity page lists the counter-ion tests that identify the salt in a drum; the COA page shows where the assay basis sits. The NAD+ page is a parallel case of one parent name covering more than one sale form, the HPLC method note explains the separation, and the quality page sets out release and change control. ### 03 SAMe stability: moisture, heat and the acidic salt URL: https://nutrition.rainwoodbio.com/products/specialty/same/stability/ Reviewed: 2026-11-19 SAMe disulfate tosylate is hygroscopic and degradation-prone, and moisture with heat is the pair that sets the rate. The powder keeps longest in a sealed, moisture-barrier pack; an aqueous solution is the weakest format. Shelf life comes from stability data on that pack and that storage condition, not from the certificate or the salt name. In one lineThe salt buys stability, not immunity: water, heat and pH still set the rate, and the pack sets the shelf life. ## The powder: water, colour and the opened pouch The catalogue limit is water ≤5.0% by Karl Fischer. That is a release gate, not an allowance for storage. Once a foil pouch is opened, the powder can take water from the air; water rises, the as-is assay falls and the dry-basis assay may barely move. The powder also darkens as it degrades, so a colour check against a retained reference is a cheap early warning. The 5% solution is acidic at pH 2.0–4.0, and that acidity is part of the salt's stability profile. Neutralising the powder or the solution is not a harmless taste adjustment; it moves the molecule toward the pH range where it degrades faster. Keep the material in its original pack, close it properly, and keep the store cool and dry. A desiccant helps in a humid room but does not replace a seal. Heat accelerates both water uptake and degradation. A loading bay, a car boot or a warehouse roof space is not a store. If a pack has been cold, let it reach room temperature before opening to avoid condensation on the powder. Record the date of opening and use the remainder within the in-use period assigned to that pack. ## In solution, the molecule is exposed The salt dissolves freely in water, which makes a drink mix or a liquid concentrate possible, but solution is where SAMe is most exposed. Heat, pH, dissolved oxygen and metal ions act at the same time, and the degradation product methylthioadenosine accumulates. A ready-to-drink process adds a pasteurisation or hot-fill step that the dry powder never sees. If a liquid is required, keep the pH acidic, protect the solution from light, reduce dissolved oxygen and validate the hold time before filling. A result from bulk powder tells you little about a beverage; the matrix, the process and the pack all alter the rate. The formulator should measure SAMe and methylthioadenosine in the finished drink at the start and end of the proposed shelf life, not only in water. ## What moves the material during storage Factors that move SAMe disulfate tosylate during storage | Stress | Effect on the material | Countermeasure | Moisture | Water rises, the as-is assay falls, and hydrolysis speeds up | Sealed foil; dry room; desiccant where needed | Heat | Faster hydrolysis and more related substances | Cool store; short heat exposure; controlled process | pH | Neutral or alkaline conditions speed the loss | Keep the salt acidic; validate any pH change | Oxygen | Oxidation at wet surfaces and in solution | Low headspace; sealed pack; deoxygenated liquids | Light | Colour drift and assay loss | Opaque pack; dark storage | Metal ions | Catalytic breakdown in solution | Plastic or stainless contact; no iron or copper | Time | Every effect above accumulates | Fixed retest period; re-assay before extension No factor here acts alone. A warm, humid store with an open pouch combines moisture and heat, and an acidic solution in clear glass adds light. The practical question is how long SAMe stays within specification in a named pack, at a stated condition, in a stated matrix. ## Designing the stability study The protocol should fix the pack, the storage condition, the sampling points and the tests. Warehouse conditions are covered by 25 °C/60% relative humidity and 30 °C/65% relative humidity; 40 °C/75% relative humidity is the accelerated arm that stresses the pack. Add a light-exposure arm; a dark incubator will not reveal a photolytic pathway. Test assay as the salt, water, pH, appearance, related substances and microbiology at each point. The counter-ion ratio is worth checking at the start and end of the study, because a salt that has lost its tosylate or sulfate is no longer the article that was released. Show each result; a pass statement on its own is not evidence. Identify the pack and the lot family. Request the stability summary for the pack on the order. A 25 kg fiber drum and a 1 kg foil pouch differ in headspace, surface-to-volume ratio and opening history; the data belongs to that pack, not to the product family. Data from another pack in the same family is a pointer, not a shelf life. ## The finished dose form changes the picture Capsules and tablets have low water activity, yet the shell and excipients can still carry moisture, and compression adds heat. Check water and appearance when the lot is released and again after storage, and look at the fill for colour change. A coating adds another layer to validate, especially if it is applied from an aqueous system. A stick pack lives or dies by its foil and seal; a pinhole is a failure, so inspect the strip, not just the powder. A drink mix adds pH, taste and a consumer-held solution to the picture. Whether an overage is needed is the formulator's call; that decision belongs to label and stability, and it cannot rescue a pack that admits water. ## Where the retest period comes from No single shelf-life figure is published for SAMe disulfate tosylate, because the pack and the way it is stored decide it. The specification carries the retest period, and the stability file for that pack is its support. A figure that names no pack, no condition and no test panel is an assertion, not a shelf life. At the end of the retest period, assay the retained sample again before extending use. Never extend on assumption, and never move a bulk figure into a repacked container. The product hub shows the standard packs; the COA page sets out the release tests; the MOQ page deals with pack and lead time; the salt-forms page explains why a study on one salt does not cover the other; the HPLC note covers the assay, and the quality page sets out release. The NAD+ page is a parallel case of a hygroscopic ingredient whose pack sets the shelf life. ### 04 SAMe disulfate tosylate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/specialty/same/moq/ Reviewed: 2026-11-19 The minimum order for SAMe disulfate tosylate is one 1 kg foil pouch, and the production pack is a 25 kg fiber drum. Standard material ships in 1–7 days from confirmation. To quote firmly, we need the salt and both CAS numbers, the assay basis, the pack and quantity, the destination and Incoterm, the document set, and the market where the finished product will be sold. In one lineThe minimum is one kilogram because a lot has to be sampled, tested and traced before it can be scaled. ## Why 1 kg is the minimum A one-kilogram pouch is enough for a bench trial, a retention sample and a third-party check, and it stays one lot from packing to use. It also ships as a parcel, so a formulator can start before the production plan is fixed. The pouch has a lot code and a COA; the test sample and the material used in the trial can be the same article. Smaller quantities are normally repacked from a larger lot, which adds a handling step and a new pack identity. The 25 kg drum lowers the handling per kilogram but ties up inventory for longer. It is also a single lot unit: one lot code, one certificate and one retained sample. The minimum is set by traceability, not by a volume target. ## Pack sizes and variants Packs for SAMe disulfate tosylate | Format | Net weight | Where it fits | Notes | Foil pouch | 1 kg | Trial work, samples, small runs | Foil barrier against moisture and light; reseal and keep dry once opened | Fiber drum | 25 kg | Routine production | Lined drum; one lot code on drum and liner | Granulated grade | On request | Flow and dust reduction | Its own specification; flow and bulk density differ The powder is the catalogue form. The pouch and drum are the standard packs; a granulated grade is a separate specification and can change the lead time. If the fill line needs a defined flow, raise it with the quotation, not after delivery. The pack is also a stability barrier. SAMe takes up water, so the foil and the drum liner are part of the protection. Once a pouch is opened, folding it over does not restore a heat seal. Record the opening date. ## Dispatch and transit Standard material is quoted at 1–7 days after confirmation. Picking, paperwork and dispatch fall inside that window; freight transit, customs and the buyer's release do not. A granulation, a special pack or a market-specific document set takes longer and is quoted separately. Get a dispatch date as well as a lead time. A pouch usually travels as a parcel, a drum on a pallet, and the Incoterm decides who books freight and clears entry. Documents should leave with the lot. ## What a quote has to contain Six points make a quote comparable: - Material. SAMe disulfate tosylate, salt CAS 97540-22-2, parent CAS 29908-03-0. - Specification. Assay as the salt, water, pH, related substances, metals and micro. - Pack. 1 kg pouch, 25 kg drum, or granulated on request. - Delivery. Destination, Incoterm and required date. - Documents. COA, specification, SDS and any destination-specific declaration. - Use and market. Supplement, food or something else, plus the country of sale. A quote that omits the salt or the market is not complete. SAMe's regulatory route varies by market, so the route may change the documents. Commercial terms are not published on this page; they are on the quote. ## A sample has to carry its lot code A sample is only useful if it carries the lot code that will appear on the production pack. Test identity, assay, water, pH and micro before scaling, and retain part of the same pouch. If the trial needs less than a kilogram, ask first: a split is a repack and needs its own record. A bench sample and a later drum may not share a lot. For this salt, add the counter-ion check and the salt factor to the qualification panel; an assay figure alone will not tell you which salt the sample is. ## Terms to settle before ordering The quote covers commercial terms, Incoterm, pack, lead time and documents. Quality terms sit alongside: specification revision, COA per lot, retained sample, retest period and change control. A quality agreement before the first production order is easier than a dispute afterwards. Return and replacement rules come from the quote and the quality agreement. If a lot fails the agreed specification, use the retained sample and a joint re-test rather than a photograph. Agree the referee laboratory and who pays before the problem arises. Write down who holds the retained sample and for how long, and attach the specification revision to the quality agreement. The product hub carries the catalogue specification; the COA page walks through the release tests; the compliance page handles the market file; the salt-forms page explains why the salt must be named on the order; the glossary entry for MOQ explains the term; the logistics page deals with freight and paperwork. The NAD+ page is a parallel case, the HPLC method note covers the assay, and the quality page covers release. ### 05 The regulatory file for SAMe disulfate tosylate URL: https://nutrition.rainwoodbio.com/products/specialty/same/compliance/ Reviewed: 2026-11-19 SAMe disulfate tosylate is not regulated as an ordinary food ingredient in every market. In several countries SAMe has been handled as a medicinal substance; in others it is sold under a dietary-supplement route. The buyer's regulatory team confirms which route applies to the destination and to the finished product. This page lists the documents and checks for the regulatory file, so the specification and the pack can be checked as one package. In one lineSAMe is not handled as an ordinary food ingredient everywhere, so the route is confirmed for the destination before the specification is fixed. ## What belongs in the file A complete file answers four questions. What material and specification revision are on the order? Which lot is up for release, and what does its COA say? Which route, limits and label rules apply in the destination? And what changes if the salt, the process or the pack changes? The certificate covers the lot; the technical data sheet defines the material; the safety data sheet covers handling. None of them answers the route question. The file also needs allergen and GMO declarations, an origin record, a residual-solvent statement and any customer-specific paperwork. If a statement is missing for the lot, say so before the order. A versioned document list beats a folder of undated PDFs. ## European Union Where a food route applies, the EU file is built from general food law, labelling rules, food-supplement rules and the contaminants regulation, alongside any product-specific measure. Regulation (EC) No 178/2002, Regulation (EU) No 1169/2011, Directive 2002/46/EC and Regulation (EU) 2023/915 are the horizontal references; the current consolidated text is the authority, not a summary. SAMe itself is not uniform across the Union. In several member states ademetionine has been handled as a medicinal substance, and a food-supplement route cannot be assumed from one member state to another. The buyer's regulatory team confirms the classification for the destination and checks that the salt named on the label is the salt the file covers. This page does not assert that any SAMe salt is authorised as a food ingredient in the EU. ## United States The US dietary-supplement framework is set by DSHEA and the labelling rules that follow it. The marketer is responsible for the safety of the ingredient and for the label, and a new dietary ingredient notification applies where the ingredient was not marketed before 15 October 1994. Whether that route fits a particular SAMe salt and a particular label is a question for the buyer's regulatory team. The label and any claim go through a separate review, away from the certificate. A certificate can confirm the salt and the assay; it does not establish the regulatory status of the ingredient. This page does not assert that either salt is authorised or grandfathered in the United States. ## Contaminant limits Contaminant results have to be judged at the finished-product dose, not just on the drum. The table is a starting point for a food-supplement file; the destination text and the daily dose set the final figure. The catalogue limits are the supplier's release gates and may be tighter than the legal maximum. Contaminant figures to check at the finished-product dose | Analyte | Common supplement reference | Evidence the file should hold | Lead (Pb) | 3.0 mg/kg in the supplement | The lot result, its method, the agreed limit and the dose-based calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | The lot result plus any category exception | Mercury (Hg) | 0.10 mg/kg in the supplement | The lot result and its method | Arsenic (As) | Customer or market limit | The limit agreed with the customer and the method, both on the certificate | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g | Viable counts and the absence findings for E. coli and Salmonella | Water | ≤5.0% | The Karl Fischer figure and the pack it refers to Arsenic often has no single EU supplement figure that covers every category, so the customer or market limit usually applies. Lead, cadmium and mercury do have horizontal supplement references; the category and dose still need a check against the current text. A single “heavy metals” total is not a substitute for the per-element results. ## Claims and the label The label names the material and its quantity in the form the destination requires. For this grade that means naming the disulfate tosylate salt and making clear whether the declared quantity refers to the salt or to the SAMe parent. A label that says only “SAMe” leaves the reviewer, the customer and the enforcement officer to guess. Claim review is a separate exercise. In the EU, health claims are governed by the claims regulation and the authorised-claims list; in the United States, structure/function claims carry their own notification and substantiation rules. No disease-related claim is made on this page, and the supplier's certificate does not approve a claim. The brand's reviewer decides whether the wording is acceptable for the product, form and market. ## The document set - Specification with the salt form, both CAS numbers, assay basis, water, pH and the contaminant limits. - Certificate of analysis for the lot, with the results and the methods. - Technical data sheet and safety data sheet. - Allergen, GMO, origin and residual-solvent statements. - Counter-ion statement for sulfate and tosylate, and the related-substance results. - Stability summary for the pack being bought. - Change-control statement covering the salt, the process, the source and the pack. Each document should carry a version and a date. The specification revision on the quotation, the certificate and the label review should be the same revision; a file that mixes versions is a finding waiting to happen. ## Pre-order checklist - The salt form, both CAS numbers and the specification version are named. - The destination route has been confirmed by the buyer's regulatory team. - The contaminant figures have been recalculated at the finished-product dose. - The label declares the salt and the basis of the quantity. - Claim wording has been reviewed for the destination. - Salt, source, process and pack all sit under change control. - Quote, specification and certificate all cite one version. The product hub carries the catalogue specification; the COA page walks through the lot certificate; the identity page sets out the analytical evidence; the salt-forms page compares the two salts; the NAD+ page is a parallel case of a name that covers more than one form. The quality page describes the release file, the HPLC method note describes the assay, and the EU regulatory note gives the framework references. ### 06 How we prove a SAMe lot is the disulfate tosylate salt URL: https://nutrition.rainwoodbio.com/products/specialty/same/identity/ Reviewed: 2026-11-19 A SAMe lot can be called the disulfate tosylate salt only when four results line up: the paperwork names the salt and both CAS numbers; HPLC retention and UV match SAMe; sulfate and tosylate are both present; and the salt factor plus the water result explain the mass balance. The assay alone cannot prove the salt. A 97.0% result is consistent with several materials, and only the counter-ion evidence separates them. In one lineIdentity is the agreement of four measurements: the adenine chromophore, the salt factor, the two counter-ions and the water balance. ## Four layers of identity evidence A certificate can carry the right name and still fail to prove the powder. Each of the four layers asks a different question and needs its own evidence. Answering only the first layer describes a label, not a powder. Four layers of SAMe disulfate tosylate identity | Layer | What is asked | Evidence | What it establishes | Document | Is the salt named? | Name, salt CAS 97540-22-2, parent CAS 29908-03-0 | Paperwork only | Chromatography | Is the peak SAMe? | HPLC retention time plus UV scan | The SAMe molecule, not the salt | Counter-ion | Are sulfate and tosylate present? | Ion chromatography for sulfate; HPLC for tosylate | The salt form | Mass balance | Is it diluted or wet? | Assay as the salt, water, related substances | Consistency of the numbers No single layer is enough. The chromatogram shows the adenine ring but not the counter-ion. The counter-ion shows the salt but not the purity. The mass balance shows consistency but not which salt was intended. Read together, they answer the question that the label asks. ## The salt factor and the counter-ion ratio The disulfate tosylate has a formula weight of 766.80 per SAMe unit, and the SAMe parent is 398.44. The salt factor is 398.44 ÷ 766.80 = 0.5196. A 100% salt contains about 52.0% SAMe; a 97.0% salt contains about 50.4%. That factor is the bridge between the certificate and the label, and it belongs in the identity file because it fixes what the percentage means. The counter-ion ratio is a second, independent check. The formula C22H34N6O16S4 contains one tosylate and two sulfate groups per SAMe unit. On a mass basis that is about 22.5% tosylate and about 25.6% sulfate, expressed as the acids. A lot with the right SAMe peak but a low tosylate figure is not this salt, even if the assay rounds to 97.0%. The ratio is a stoichiometry check, not a purity test. Residual moisture, a diluent or a different salt all move it. Ion chromatography gives the sulfate figure; HPLC with UV detection gives the tosylate figure. Ask for both, and ask for the method and the standard used to calculate them. ## What X-ray diffraction can and cannot show X-ray diffraction asks whether the solid is crystalline and whether the pattern matches a reference. A SAMe salt that has been freeze-dried, spray-dried or milled may be amorphous or partly crystalline, depending on isolation and drying. The pattern is a fingerprint of the isolation process and can reveal a crystalline diluent; it is not an identity test on its own. XRD cannot prove the counter-ion ratio, and it cannot separate two amorphous solids. Ask for the reference pattern, the preparation method and the detection limit before accepting a “match”. In a dispute, the chromatogram, the counter-ion results and the mass balance carry more weight than a diffraction trace without a reference. ## How substitution shows up Common SAMe substitutions and the signals | Substitution | What it does | Signal | Test | Diluent, such as maltodextrin or an amino acid | Lowers the salt assay; changes the water result and the colour | Assay low; mass balance short | HPLC, water, mass balance | Butanedisulfonate sold as tosylate | Different counter-ion and formula weight | Tosylate absent or low; sulfate ratio wrong | Counter-ion methods, salt factor | Sulfate-only salt | No tosylate | Tosylate absent | HPLC for tosylate | Methylthioadenosine | Degradation product; lowers SAMe | Extra peak near SAMe | Related-substance HPLC | Water | Raises water; lowers the as-is assay | Water high; dry-basis assay normal | Karl Fischer Colour is a weak signal: white to off-white covers a wide range, and a diluent can preserve it. The stronger signals are the counter-ion results and the mass balance. If the certificate covers appearance and assay but says nothing about counter-ions, the most likely substitution remains untested. ## Identity lines for the specification - “S-Adenosyl-L-methionine disulfate tosylate, salt CAS 97540-22-2; SAMe CAS 29908-03-0; C22H34N6O16S4; formula weight 766.80.” - “Assay ≥97.0% by HPLC as the salt; report water and the assay basis.” - “Identity by HPLC retention and UV; attach the chromatogram.” - “Counter-ion identity: sulfate by ion chromatography, tosylate by HPLC, with the ratio stated.” - “Water ≤5.0%; pH 2.0–4.0 at 5%; related substances including methylthioadenosine against agreed limits.” - “No other SAMe salt or diluent above the agreed limit.” - “Destination market and salt name settled before ordering.” ## Questions to put to the supplier - Which salt is this lot, and are both the salt CAS and the parent CAS on the certificate? - Will you send the chromatogram and UV spectrum, not just the assay figure? - What are the sulfate and tosylate results, and which methods produced them? - What is the water result, and how was the assay converted to the salt basis? - If we disagree about a lot, will you re-test the retained sample jointly? Those five answers together form an identity file; a single assay figure does not. The product hub carries the catalogue specification; the COA page maps each figure to its certificate line; the salt-forms page compares the two salts; the stability page covers the storage limits; the HPLC method note sets out the separation, and the quality page covers the retained sample. The NAD+ page is a parallel case of one name covering two sale forms. ### 01 What the COA for sialic acid actually contains URL: https://nutrition.rainwoodbio.com/products/specialty/sialic-acid/coa/ Reviewed: 2026-11-19 The certificate for a sialic acid lot should report appearance, identification by HPLC and IR, assay by HPLC, water, the pH of a 1% solution, the heavy-metal panel and microbiology, each with its method and release limit. The catalog limits are the specification; the batch COA is the evidence for one pack. The two lines that tell a complete certificate from a thin one are the assay basis and the source behind the lot. In one lineAn assay percentage means nothing until the certificate names its basis and the HPLC detection behind it, and those numbers only describe a lot whose source is also stated. ## What the certificate has to show A certificate earns its place when each line runs from parameter to method to limit to a measured value. A row that reads only “conforms” records a conclusion and withholds the evidence. The table below is the release panel for N-acetylneuraminic acid as this catalog specifies it; the batch certificate repeats those lines with the result for the lot. Identity deserves two methods rather than one. HPLC retention against a reference standard places the peak, and an infrared spectrum compares the functional groups with the reference material. Retention alone can survive a co-eluting sugar; the spectrum is the second dimension. Release tests for sialic acid (N-acetylneuraminic acid) | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | HPLC retention and IR spectrum | Conforms to the reference | Assay (N-acetylneuraminic acid) | HPLC, detection stated | ≥98.0% | Water | Karl Fischer | ≤5.0% | pH (1% solution) | Potentiometric | 2.0–3.5 | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent ## The assay basis, the water and the pH The catalog figure is ≥98.0% by HPLC. The certificate must also say whether the laboratory calculated that percentage on the powder as received or on the dried solids. The two are different measurements. A lot that measures 95.5% as-is with 4.0% water calculates to 99.5% on the dried basis, so the same powder can pass a dried-basis limit and miss a 98.0% as-is limit. A comparison that ignores the basis can rank two lots the wrong way round. Water is measured by Karl Fischer and limited to ≤5.0%. That is a release gate, not an allowance that the pack may absorb in storage. Because the assay and the water are linked, the two figures belong on the same certificate, beside each other, with the basis printed in the assay row rather than buried in a footnote. The pH of a 1% solution is 2.0–3.5. A 1% solution is 10 g/L, and the carboxyl group of the free sugar has a pKa near 2.6, so an acidic reading is expected. The certificate should state 1% w/v and the temperature, because pH readings are method-dependent; pH is a consistency check on the acid form, not a substitute for identity, and it will not separate N-acetylneuraminic acid from another acidic sugar. ## Release limit and batch result A release limit is the boundary agreed before the lot is made; a batch result is the figure the bench reported for that lot. The page should show both, in separate columns, with the method beside each. A column that simply repeats the specification has not reported a measurement. What the limit and result columns should show | Parameter | Release limit | Result column | Assay | ≥98.0%, with the basis named | A measured percentage and the basis used | Water | ≤5.0% | A measured percentage by Karl Fischer | pH | 2.0–3.5 at 1% | A measured reading with the concentration and temperature | Heavy metals | Per element | A figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot For heavy metals, a single total hides the element that failed. Microbiology needs a count and an absence result; the word “pass” is not evidence. If the certificate reports a sum or a conclusion, ask for the underlying figures before the lot is accepted. ## What moves from batch to batch The source sets the pattern of variation. An egg-yolk route starts from a biological material, so the protein and lipid load, the colour and the water can move with the starting material and the hydrolysis step that releases the bound sugar. A fermentation route moves with the strain, the medium and the recovery; assay and colour are usually tighter, but residual medium and related substances can appear. A dairy route brings lactose and milk proteins into the purification challenge, and it can bring N-glycolylneuraminic acid with it. Drying and milling move the water, the flow and the colour without touching the molecule. A batch that is slightly darker or more cream than the last can be a drying or hold-time difference while the assay still passes; colour is the least quantitative line on the certificate. Watch the direction across lots: an assay sliding down, water creeping up, or an extra peak appearing. The certificate's lot code must be the one printed on the pouch, the drum and the retained sample. ## When to send a sample out An independent test earns its keep when the source is new, when the first shipment enters a regulated market, when the form is disputed, or when the allergen statement needs proof. The useful panel is targeted rather than a full repeat: HPLC with a reference standard and a named detection for identity and assay, IR for the functional-group comparison, water by Karl Fischer, pH, ICP-MS for the metals, and microbiology. Add a protein-specific ELISA for egg or milk when the source statement will appear on a label, and an HPLC or LC-MS check for N-glycolylneuraminic acid when the material is dairy-derived. A fermentation route may need residual-solvent and medium-residue tests. Require the laboratory to state its detection limit for each screen; “not detected” without a limit says more about the method than about the lot. Keep the sample under chain of custody, identify the lot on the report, and retain a portion so that a contested result can be refereed on the same powder. ## What to compare between suppliers Six lines make the comparison: form and CAS number; assay and basis; source and allergen; water and pH; metals and microbiology; pack and lot code. Two quotations that both say 98.0% but differ on the source or the basis are not describing the same material, and the difference will surface at the label or at the port. Catalog values are on the sialic acid product page. The tests that separate the free sugar from the bound form are on the identity page; the source and grade choice is on the grades page; the market file is on the compliance page. The HPLC method note explains the separation, and the quality page explains release. ### 02 Sialic acid grades: free NANA, source and assay URL: https://nutrition.rainwoodbio.com/products/specialty/sialic-acid/grades/ Reviewed: 2026-11-19 Sialic acid is supplied here as free N-acetylneuraminic acid, a single nine-carbon sugar acid; sialyllactose is a different ingredient in which sialic acid is bound to lactose. Within the free form, the grade decisions are the source (egg yolk, fermentation or dairy), the assay level and the physical form. Source and form both change the allergen statement and the label, so the grade is not only a percentage on the certificate. In one lineThe first grade decision is the form, the second is the source, and the assay percentage only ranks suppliers after both are fixed. ## Why “sialic acid” is not one grade Sialic acid is a family name for a group of nine-carbon acidic sugars. The commercial free form is N-acetylneuraminic acid, also written Neu5Ac or NANA, with CAS 131-48-6 and molecular weight 309.27. Sialyllactose is not a purer or weaker version of that material. It is a disaccharide made of sialic acid and lactose, and its sialic acid is locked in a glycosidic bond until hydrolysis. The two are different label ingredients with different assays. Even inside the free form, one catalog number does not cover every lot. Egg yolk, fermentation and dairy routes arrive at the same molecule from different starting materials, and they leave different traces behind: egg or milk protein, lactose, other sugars, colour and related substances. The grade combines the form, the source and the assay because those three decide what the certificate can state and what the label may say. ## The form and the source side by side The first table separates the free sugar from the bound one. The second compares the sources that are used to make the free sugar. Neither table is a substitute for the specification of the lot being bought. Free N-acetylneuraminic acid against bound sialyllactose | Property | Free NANA | Sialyllactose | Chemical form | Free nine-carbon sugar acid | Sialic acid linked to lactose | CAS number | 131-48-6 | A separate CAS number for each isomer and salt | Formula | C11H19NO9 | C23H39NO19 for the disaccharide | Molecular weight | 309.27 | About 633.55 | Sialic acid share | 100% of the molecule | About 48.8% by mass | Assay basis | HPLC on the free sugar | Intact disaccharide, or sialic acid after hydrolysis | Source | Egg yolk, fermentation or dairy | Dairy oligosaccharides or fermentation | Label name | N-Acetylneuraminic acid | The named sialyllactose, for example 3′-sialyllactose Source options for the free sugar | Source | Allergen statement | What to check | Egg yolk | Egg | Protein carryover, colour, bound-sugar hydrolysis step | Fermentation | Depends on the medium | Medium residues, residual solvents, strain and recovery | Dairy | Milk | Lactose, milk protein and N-glycolylneuraminic acid The allergen line follows the source, not the molecule. A fermentation route is not automatically free of an allergen declaration: the medium, the antifoam and the washing step decide whether an egg or milk protein can carry through. The source also decides whether a vegan claim is available. ## Solubility, pH and appearance Free N-acetylneuraminic acid is a white to off-white powder, freely soluble in water, and the solution is acidic. The catalog pH of a 1% solution is 2.0–3.5, which is what a free sugar acid reads; a sodium salt would sit higher. The powder is hygroscopic, so the water limit of ≤5.0% is a practical handling number, not only a certificate line. Sialyllactose also dissolves in water, but its solution is not a solution of free sialic acid. The glycosidic bond holds until acid, heat or an enzyme breaks it. A formulator who needs the free sugar in a drink cannot reach it by dissolving sialyllactose, because the ingredient that reaches the label is still the disaccharide. Appearance is the weakest way to tell the grades apart. Both can be white to off-white, and a spray-dried or diluted powder can look the same as a pure one. Colour and flow belong on the specification, but the identity and the source are settled by analysis and documents. ## The arithmetic behind a label declaration The molecular weights give the conversion. Sialyllactose at about 633.55 g/mol carries 309.27 g/mol of sialic acid, so the free-sugar share is about 48.8%. A formula that declares 50 mg of sialic acid from the disaccharide therefore needs about 50 ÷ 0.488 = 102 mg of sialyllactose. Where the ingredient is the sodium salt, the molecular weight rises by about 22 and the share falls to roughly 47.2%, so the weight needed rises again. The free form is simpler. Take a 98.0% result on the as-is basis: 100 mg of powder delivers 98 mg of N-acetylneuraminic acid. If the assay is on the dried basis, the as-is figure is lower by the water content, and the weigh-up should use the as-is value. A label that declares 50 mg of free sialic acid therefore needs about 51 mg of a 98.0% powder, adjusted for the basis. None of these figures is a recommended intake. The arithmetic is there to keep the label declaration and the weigh-up in step. The dose level and the permitted use belong to the destination market and the finished product, not to this page. The buyer's regulatory team confirms both before the label is fixed. ## Writing the grade into the specification - “N-Acetylneuraminic acid, CAS 131-48-6, C11H19NO9, molecular weight 309.27.” - “Source: egg yolk, fermentation or dairy, stated on the certificate and the specification.” - “Assay ≥98.0% by HPLC, with the basis and the detection method named.” - “Water ≤5.0% by Karl Fischer; pH 2.0–3.5 at 1% w/v.” - “Metals and microbiology as listed, with the allergen statement matching the source.” - “No bound sialyllactose above the agreed limit, where the free form is claimed.” - “Destination and intended use settled before the order.” We supply the free form. Sialyllactose is a separate purchase with its own specification, assay and label; substituting one for the other requires a written change control. ## When another grade is the wrong choice If the label names sialyllactose, free NANA is not a drop-in: the declared ingredient would change, and the sialic acid figure would no longer describe the same disaccharide. If the label names free N-acetylneuraminic acid, a sialyllactose lot cannot stand in, even if its total sialic acid figure is high after hydrolysis. If the brand needs an egg-free or milk-free statement, the egg-yolk and dairy routes are excluded unless the purification and the allergen test support the claim. If a vegan statement is needed, check the fermentation medium as well as the organism. And if the destination file covers one source or one form, a switch of grade is a regulatory change, not a purchasing convenience. Catalog values are on the sialic acid product page. The COA page explains the certificate lines; the sialic acid versus sialyllactose page continues the free-versus-bound comparison; the compliance page covers the allergen and market rules. For another specialty ingredient whose source and structure decide the grade, see the beta-glucan page; the HPLC method note covers the assay. ### 02.1 Sialic acid vs sialyllactose: free sugar against the bound form URL: https://nutrition.rainwoodbio.com/products/specialty/sialic-acid/grades/sialic-acid-vs-sialyllactose/ Reviewed: 2026-11-19 Sialic acid and sialyllactose are related but not interchangeable. Sialic acid, supplied here as N-acetylneuraminic acid, is the free nine-carbon sugar acid with CAS 131-48-6 and a molecular weight of 309.27. Sialyllactose is a disaccharide in which that sugar is bound to lactose; it has its own molecular weight, its own assay and its own label name. A buyer who orders one and receives the other has a different ingredient, not a different grade. In one lineFree sialic acid is the sugar itself, while sialyllactose is that sugar tied to lactose, so the assay, the conversion and the label all change with the form. ## Free sugar and bound sugar N-Acetylneuraminic acid is a nine-carbon acid sugar: a carboxyl group, an N-acetyl group and a polyol chain, with the ring closing at C2 in water. It is the building block at the ends of many glycoproteins and glycolipids, and the form sold as a free-sugar ingredient. Sialyllactose is built from that sugar and lactose. The sialic acid is attached through an α(2→3) or α(2→6) glycosidic bond to the galactose of lactose, which gives 3′-sialyllactose and 6′-sialyllactose as distinct compounds. While the bond is intact, the powder is a disaccharide and the sialic acid is not free. Acid, heat or a sialidase releases it, so an assay that hydrolyses the sample measures total, not free, sialic acid. That difference in structure is the whole comparison. Both can be white to off-white powders that dissolve in water, and both get called “sialic acid” in loose speech. The specification, assay and label must be more precise. ## The two materials side by side Free N-acetylneuraminic acid against sialyllactose | Property | Free sialic acid (NANA) | Sialyllactose | Chemical identity | Free nine-carbon sugar acid | Sialic acid α-linked to lactose | CAS number | 131-48-6 | A separate number for each isomer and salt form | Formula | C11H19NO9 | C23H39NO19 for the disaccharide | Molecular weight | 309.27 | About 633.55 | Sialic acid share | 100% of the molecule | About 48.8% by mass | Assay | HPLC on the free sugar | Intact disaccharide, or sialic acid after hydrolysis | Solution | Acidic, pH 2.0–3.5 at 1% | Dissolves; the sialic acid stays bound | Source | Egg yolk, fermentation or dairy | Dairy oligosaccharides or fermentation | Label name | N-Acetylneuraminic acid | The named sialyllactose, such as 3′-sialyllactose The molecular-weight row drives the arithmetic. Divide 309.27 by 633.55 and the sialic acid share of the disaccharide is about 48.8%. The sodium salt of sialyllactose adds about 22 mass units and brings the share down to roughly 47.2%. A label that declares a sialic acid quantity from a sialyllactose ingredient is declaring a calculated figure, not the mass of the powder. ## Two assays that do not compare The free sugar is measured directly. An HPLC method with a suitable detection mode, often after derivatisation with 1,2-diamino-4,5-methylenedioxybenzene and fluorescence detection, resolves N-acetylneuraminic acid against a reference standard. The result is a percentage of the powder, with a stated basis. The same method can also separate N-acetylneuraminic acid from N-glycolylneuraminic acid, which matters when the source is dairy. Sialyllactose is measured either as the intact disaccharide or as sialic acid after hydrolysis. Those are two different results. An intact assay says how much sialyllactose is present; a hydrolysis assay says how much sialic acid the sample can yield. A certificate that reports only “sialic acid 98%” for a sialyllactose lot has not said whether the disaccharide is 98% pure or whether the sialic acid content is 98% of a hydrolysed sample. Ask which method produced the number. A “sialic acid” figure on a sialyllactose lot is also capped by the mass share. Even a pure disaccharide yields about 48.8% sialic acid, so a claim of 98% sialic acid on a sialyllactose powder cannot be a simple mass percentage of the disaccharide. It may be an assay on a hydrolysed aliquot expressed against a standard, or it may be a different material. The number needs its definition before it can be compared. ## Source and the allergen statement The free sugar can come from egg yolk, fermentation or dairy. Each route leaves a different trace: egg protein, milk protein and lactose, or fermentation-medium residues. The allergen statement follows the source, so the same molecule can carry an egg declaration, a milk declaration or neither. Sialyllactose is commonly made by fermentation or recovered from dairy streams. A dairy-derived disaccharide brings lactose and milk protein into the specification, and it can bring N-glycolylneuraminic acid with it. A fermentation route avoids the dairy allergen only if the medium and the downstream steps support that claim; the organism alone does not decide it. The source also decides whether a vegan statement is available. Egg yolk and dairy are animal sources; a fermentation route can be vegan if the medium is plant-derived and the process aids are acceptable. That is a documentation question as much as an analytical one. ## The label and the form In the EU, the label names the ingredient in the form used, and the allergen declaration follows the source. “N-Acetylneuraminic acid” and “3′-sialyllactose” are different names for different ingredients, so one cannot stand in for the other on the panel. The same rule applies in the US Supplement Facts panel and in the GB and Northern Ireland frameworks. The declared quantity has to match the form as well. If the formula is built on 50 mg of free sialic acid, the weigh-up uses the free-sugar assay; if it is built on 50 mg of sialic acid from sialyllactose, the weigh-up uses about 102 mg of the disaccharide. Writing “sialic acid” without the form leaves the reader unable to tell which of those two products is in the pack. The market file follows the form too. Some markets have a product-specific entry for a particular form, and the buyer's regulatory team confirms whether that entry covers the material and the use. A file written around one form does not automatically cover the other. ## When to choose which Choose free N-acetylneuraminic acid when the ingredient is the single sugar, when a defined ≥98.0% HPLC assay and a stated water limit are the specification, and when the label will name the free form. It dissolves readily, gives an acidic solution and fits a powder or capsule formula without a hydrolysis step. Choose sialyllactose when the ingredient is the disaccharide itself and the label names it. It is not a substitute route to free sialic acid, because the bound sugar is not free in the powder and the label must say what it is. Changing form means a new specification, a new assay basis, a new allergen review and a new label. Start with the product hub for the free-form catalog values. The grades page places this comparison among the source and assay choices; the compliance page covers the market file; the identity page sets out the tests that separate the forms. The beta-glucan page shows a parallel source-and-structure decision in another specialty ingredient, and the HPLC method note describes the separation behind the assay. ### 03 Sialic acid stability: moisture, heat and the pack URL: https://nutrition.rainwoodbio.com/products/specialty/sialic-acid/stability/ Reviewed: 2026-11-19 Sialic acid powder is most stable when it is dry, sealed and cool. Water uptake, heat and an acidic solution are the three conditions that move it, and the powder is far more forgiving than a drink. The shelf life comes from stability data on the pack and storage condition that will actually be used, not from the certificate. In one lineThe sealed, dry powder is the stable format; the acidic solution is the one that limits the shelf life, and the pack and the matrix decide the number. ## The powder: water, colour and the seal The catalog limit is water ≤5.0%, measured by Karl Fischer. That figure is a release gate, and it is also the number to watch in storage: an opened pouch takes up moisture from the air, the as-is assay falls and the powder can cake. The foil pouch is the barrier, and the seal is where it usually gives way. Folding an opened pouch over does not recreate a heat seal, and the headspace has already exchanged with room air. Colour is the visible signal. White to off-white can drift towards cream or tan as the powder picks up water and reacts with traces of amines or proteins, a browning reaction that the assay may not capture at once. A darker lot is not automatically out of specification, but a colour trend across the stability points is a reason to look at the water and the pack rather than only at the assay. Heat accelerates both moisture pickup and browning. A sealed pack usually tolerates an ambient warehouse. A hot loading bay, a vehicle cabin or a greenhouse does not count as ambient. When a pack comes out of cold storage, wait for it to reach room temperature before opening; otherwise condensation forms on the powder. ## The solution: acidic, heat-sensitive and microbially exposed A 1% solution reads pH 2.0–3.5, which is the natural acidity of the free sugar. That low pH is useful for a beverage base and unhelpful for stability: acid and heat together can hydrolyse glycosidic bonds in any bound material and shift the anomer balance of the free sugar. The molecule also exists as an α/β mixture in water, so a solution is an equilibrium rather than a single fixed species. Water activity adds a microbiological question that the dry powder does not have. A preserved, low-pH drink is not sterile, and a hold tank before filling is a growth window. For a ready-to-drink product, validate the heat load, the pH, the preservative and the hold time together. Bulk-powder data cannot be read across to a drink, because the matrix, the process and the pack all change the rate. If a liquid concentrate is unavoidable, keep it cool, protect it from light, and give it a measured hold time rather than an assumed one. Dilute acid solutions can also attack some equipment and packaging, which is a processing issue rather than a stability one but belongs in the same trial. ## What drives the change Factors that move sialic acid during storage | Factor | Effect | Control | Water | Raises the water figure, lowers the as-is assay, causes caking | Sealed foil pouch; dry store; desiccant where justified | Heat | Accelerates browning and solution-side reactions | Controlled store; cool process; short hold | Acid | Hydrolyses bound forms; shifts the anomer balance | Validate the matrix pH; do not assume the powder data | Amines and proteins | Browning with the reducing sugar | Segregate from amine-rich premixes; control water | Oxygen and light | Colour drift at exposed surfaces | Opaque or foil pack; low headspace | Microbiology | Growth in aqueous systems | Preservation, pH, heat process and hold-time validation These factors interact. A warm, humid store with an open pouch is worse than any one of them alone, and a low-pH drink held warm combines acid, heat and water in the same container. The question worth asking is narrower than whether the ingredient is stable: stable in this pack, under this condition, for this long. ## Building the stability protocol A protocol fixes four things: the pack, the condition, the time points and the test panel. Model the warehouse with 25 °C/60% relative humidity long-term and 30 °C/65% intermediate; stress the pack at 40 °C/75%. Add a light-exposure arm for colour drift, and an open-pouch arm for the in-use period after the first opening. Test assay with its basis, water, pH, appearance and identity at each point, and add microbiology for any aqueous or high-water-activity sample. Report the individual results rather than a pass statement, and name the pack and the lot family. A drink, a stick pack or a gummy needs its own matrix trial at the real process pH and heat load. Request the stability summary for the pack you will actually buy. The drum and the pouch differ in headspace and in how often they are opened, so a drum figure cannot be applied to a repack. ## What the finished formula does Capsules and tablets keep water activity low, yet the shell and the excipients can still move moisture. Test water and appearance at release and again after storage, and inspect the fill for caking. A stick pack lives or dies by its seal; a pinhole is a failure, so inspect the strip as well as the powder. A beverage combines acid, heat and water. Powder data is where the matrix work begins, not where it ends; any overage is a formulation and label decision, not a repair for a weak pack. A gummy is harder again, because the water, the cooking heat and the protein or amine in the base can brown the sugar before the pack is closed. The source matters here as well. An egg-yolk or dairy-derived powder carries a protein load that a fermentation-derived powder does not, and protein plus water plus heat is the browning combination. That is a reason to run the matrix trial on the grade that will actually be used, not on a different source from the same catalog. ## Where the shelf life comes from There is no single shelf-life figure for sialic acid that holds across packs; the pack and the storage condition decide. The retest period on the specification should point to a stability file for that pack. A figure with no pack, no condition and no test panel is a marketing line, not a shelf life. At the end of the retest period, re-test the retained sample before extending use. Do not extend on assumption, and do not apply a drum figure to a repacked container. The product hub lists the standard packs; the COA page explains the release tests; the MOQ page covers pack size and lead time; the HPLC note covers the assay; the quality page covers how a lot is released. ### 04 Sialic acid: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/specialty/sialic-acid/moq/ Reviewed: 2026-11-19 Sialic acid is sold from a 1 kg foil pouch, with a 25 kg fiber drum as the bulk pack; standard-pack orders are quoted at 1–7 days. A firm quotation needs the form and CAS number, the source and allergen statement, the assay basis, the quantity and pack, the destination and Incoterm, and the intended use. Without those details the quotation is an indication rather than an offer. In one lineA kilogram is the qualification unit: one lot code, one certificate and enough powder for a trial, a retained portion and an independent check. ## Why 1 kg is the floor A kilogram is enough for a formulation trial, a retained portion and a referee test, and it still travels as a parcel rather than a pallet. The pouch has its own lot code, so the material on the bench, the material in the retained jar and the material named on the certificate are the same lot. Ordering under a kilogram usually means someone opens a drum and divides it. That introduces a repack step, a new container and a second lot history, and the chemistry does not improve. At the other end, the 25 kg drum cuts handling per kilogram while tying more stock to one lot. The minimum is set by the pack, not by the size of the order, and a granulated or diluted grade is a different specification rather than a smaller pack. ## Packs and formats Standard sialic acid packs | Pack | Net weight | Typical use | Points to note | Foil pouch | 1 kg | Trial, qualification sample, small batch | Moisture and light barrier; reseal or transfer after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Particle profile changes; specification revision needed The catalog form is a powder. Granulation changes the flow and the particle profile, so it is a specification change with its own sample and approval, not a packing option. The same applies to a diluted grade: the carrier becomes part of the label and the assay is no longer the same figure. ## Dispatch and transit Orders for the standard pack are quoted at 1–7 days from confirmation. The window covers picking, paperwork and handover to the carrier. Transit, customs and the customer's own quality release sit outside it. Granulation, dilution or a non-standard pack adds time; the quotation should list that separately. Get the dispatch date as well as the lead-time figure. The pouch usually moves as a parcel and the drum on a pallet; the Incoterm allocates freight booking and customs entry. Documents belong on the same shipment as the lot, not in a follow-up email. ## What makes a quotation firm Six details turn a quotation into an offer that can be compared: - Product and form. N-Acetylneuraminic acid, CAS 131-48-6, with the free form written out and sialyllactose explicitly excluded. - Source and allergen statement. Egg yolk, fermentation or dairy, with the declaration that follows from it. - Specification. Assay and basis, water, pH, heavy metals, microbiology and any related-substance limit. - Quantity and pack. A 1 kg pouch, a 25 kg drum, or a granulated or diluted grade. - Destination and Incoterm. Destination country, port or address, and the trade term. - Intended use and market. Supplement, food or another use, plus the market where the finished product will be sold. A quotation that names only “sialic acid” is incomplete, because the same words cover the free sugar and the bound disaccharide. A quotation without the source is also incomplete, because the allergen statement and the label follow the source. Commercial terms are not published here; they belong on the quotation. ## A sample needs a lot behind it Use the 1 kg pouch as the qualification lot. Run identity, assay, water, pH and microbiology on it before committing to a production quantity, and retain a portion from that same pouch. The code on the pouch should be the code on the COA and on the quotation, so a later question can be answered from the same material. A sample with no lot behind it proves that a powder exists, not that a supply does. A bench-scale quantity below the pack size is a conversation to have before the order, not after. Dividing a bulk lot creates a repack with its own history; record it as a separate item, not as the catalog pouch. Never assume that the bench sample and the production drum share a lot, and do not qualify a supplier on a hand-picked sample outside the normal pack. ## Terms to fix before ordering A purchase order should carry both the commercial terms and the quality terms. On the commercial side: Incoterm, pack, lead time, documents. On the quality side: specification revision, COA per lot, retained sample, retest period, change-control route. A quality agreement signed before the first production order saves trouble later. Returns and replacements are governed by the quotation and the quality agreement. A lot that misses the agreed specification is a matter for the retained sample and a joint re-test, not a photograph. Agree in advance which laboratory both sides accept and how a referee test is handled. For the catalog values, start at the sialic acid hub. The COA page walks through the release tests; the compliance page covers the market file; the MOQ glossary entry defines the term; the quality page describes how a lot is released. ### 05 The regulatory file for sialic acid URL: https://nutrition.rainwoodbio.com/products/specialty/sialic-acid/compliance/ Reviewed: 2026-11-19 Sialic acid can be placed on a market only after the destination's route is settled, and that route depends on the form, the source and the intended use. What follows is the document set and the checks that belong in the file; it does not decide the route for a particular lot. The buyer's regulatory team confirms that decision against the current text before the first order. In one lineThe specification describes the powder, the certificate describes the lot, and only the destination's current rule can say whether that lot may be sold and how it must be labelled. ## What the file has to answer A regulatory file for this ingredient answers four questions in order. Which material is being bought, and against which version of the specification? Which lot is up for release, and what does its certificate say? Which route, limits and label rules apply in the destination? What happens if the source, the process or the pack is changed? The technical data sheet answers the first, the COA answers the second, and the destination rule answers the third. No single document answers all four. The file should also carry the allergen statement, the GMO statement, the origin record and any customer-specific declaration. If a statement is missing, name the gap before the order instead of discovering it at the border. Version numbers and dates matter: a folder of undated PDFs is not a file, because nobody can tell which specification the certificate was released against. ## European Union In the EU, the file sits inside general food law, the food-supplements framework, the labelling rules and the contaminant rules. Regulation (EC) No 178/2002 sets the general obligations; Directive 2002/46/EC covers food supplements; Regulation (EU) No 1169/2011 governs the label, including the Annex II allergen list, where egg and milk are named; and the current contaminants regulation sets the maximum levels. The consolidated texts are the reference, not a summary, and the rules can change. Novel-food status is a separate question from food-supplement status. Some markets have a product-specific entry for this form, and the EU novel-food Union list includes an entry for N-acetyl-D-neuraminic acid. Whether that entry covers a particular lot depends on its specification, its source and its conditions of use. The buyer's regulatory team checks the entry and the current text; this page does not assert that a lot is authorised. Great Britain and Northern Ireland follow different routes and are checked separately. GB uses the retained framework and its own register, while Northern Ireland follows the EU list. The buyer decides which route the destination falls under. ## United States In the US, a sialic acid ingredient for a dietary supplement is reviewed through the dietary-supplement route. The practical questions are whether the substance was marketed as a dietary ingredient before 1994, whether a GRAS conclusion covers the intended use, or whether a new dietary ingredient notification is the basis. The finished product is made under 21 CFR 111, and the Supplement Facts panel names the ingredient in the form used. Egg and milk are major food allergens under FALCPA, so the source statement and the allergen declaration must agree with the label. A fermentation route still needs the medium checked. Structure/function claims are made with the required disclaimer and must be truthful and not misleading; a disease claim is outside the supplement route. The buyer's regulatory team confirms the basis for the ingredient and reviews the claim wording separately from the certificate. ## Contaminants and the finished-product calculation The heavy-metal limits on the certificate are the starting point, not the end of the calculation. The destination rule applies to the finished product, so the daily intake of the ingredient decides how much of a lot result can be carried into the supplement. A lot that meets the catalog panel can still fail the finished-product calculation at a high use level. Contaminants to check in the finished product | Parameter | Usual supplement limit | Evidence required | Lead (Pb) | 3.0 mg/kg in the supplement | Lot figure, method and the dose calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot figure and any category exception | Mercury (Hg) | 0.10 mg/kg in the supplement | Lot figure and method | Arsenic (As) | Market or customer limit | Agreed limit and method, both on the certificate The catalog panel is Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg. Those are release limits for the ingredient; they do not replace the destination rule. Microbiology, residual solvents and any source-specific marker, such as N-glycolylneuraminic acid in a dairy-derived lot, belong in the same review. ## Claims and the label A compliant label states what the ingredient is, how much is present and where it came from, in the wording the destination requires. For the free sugar that is “N-acetylneuraminic acid”; for the bound form it is the named sialyllactose. The two names are not interchangeable, and a claim written around one does not transfer to the other. In the EU, health claims are governed by Regulation (EC) No 1924/2006 and must be authorised for the substance and the wording. This page does not assert an authorised claim for sialic acid. In the US, a structure/function claim needs the disclaimer and must stay away from disease. In both markets, the brand's reviewer approves the final wording; a certificate cannot authorise a claim, and a claim cannot amend a specification. ## Documents the file should contain - Specification with the version, the form, the CAS number and the assay basis. - Batch COA with methods, limits and results. - Technical data sheet and safety data sheet. - Allergen statement matching the source, plus the GMO and origin statements. - Residual-solvent statement for a fermentation route, and the source-specific marker result where relevant. - Manufacturing flow chart and the change-control route for source, process and pack. The certificate's lot code should be the one on the pack and the retained sample. A document package that cannot be tied to the lot is a description of a product family, not a release file. ## Checks before the first order - The specification names its version, the CAS number and the free form. - The destination route has been confirmed by the buyer's regulatory team, against the current text. - The allergen statement matches the source and the label wording. - The metal results have been carried through to the finished-product dose. - Claim wording has had its own review, separate from the certificate. - Quotation, specification and COA all point to one version. Catalog values are on the sialic acid product page. The source and form choices are on the grades page; the certificate lines are on the COA page; the identity tests are on the identity page. Framework references are in the EU regulatory notes; the quality page describes release. ### 06 How we prove a sialic acid lot is NANA URL: https://nutrition.rainwoodbio.com/products/specialty/sialic-acid/identity/ Reviewed: 2026-11-19 The free sugar is confirmed when four independent lines point the same way: the paperwork names N-acetylneuraminic acid and CAS 131-48-6, HPLC retention and IR match the reference, the mass balance closes with water and related substances, and a hydrolysis check finds no bound form. The assay alone cannot separate the free sugar from sialyllactose diluted into the same powder. The hydrolysis check is the direct test for that substitution. In one lineIdentity is the agreement of four measurements: retention and IR name the molecule, the mass balance closes the powder, and hydrolysis shows whether any of the sialic acid arrived bound to lactose. ## The identity layers Each layer answers a separate question. A supplier who supplies only the first has described a document, not a powder. The paperwork is necessary because the form and the CAS number must be fixed before any test can be judged against them; the analytical layers then test the claim from different directions. Four layers of sialic acid identity | Layer | Question | Test | What it proves | Paperwork | Is the form named, with its CAS number? | Name, CAS 131-48-6, formula | Only that the document is consistent | Chromatography and IR | Is the molecule N-acetylneuraminic acid? | HPLC retention and IR spectrum | The molecule, not its source | Mass and structure | Does the mass fit the structure? | LC-MS or NMR where needed | The structure of the sugar acid | Balance and hydrolysis | Is the powder wet, diluted or bound? | Assay, water, related substances, hydrolysis | The quantity and the form ## The free-to-bound ratio The most useful ratio for this product is the one between the free sugar and the total sugar released by hydrolysis. N-Acetylneuraminic acid is a nine-carbon sugar acid with a molecular weight of 309.27. Sialyllactose is a disaccharide of sialic acid and lactose with a molecular weight near 633.55, so only about 48.8% of its mass is sialic acid. The two figures are not interchangeable, and a “sialic acid” result on a sialyllactose lot depends on whether the laboratory hydrolysed the sample first. Run the assay twice: once on the sample as received and once after acid or enzymatic hydrolysis. A free N-acetylneuraminic acid lot shows little or no increase, because the sugar is already free. A sialyllactose lot shows a large increase, from near zero free sugar to roughly 49% of the sample mass. A blend falls between the two in proportion to its bound fraction. This is the test that separates a genuine free-sugar lot from a powder that carries the same word on the label but a different molecule in the drum. The ratio also catches a dilution that the assay alone might miss. If the powder contains 48% free sialic acid and 52% maltodextrin, the assay falls to about half, but a supplier may still describe it as “sialic acid”. The hydrolysis ratio, the water figure and the related-substance profile together show whether the remainder is water, a carrier or a bound form. ## What XRD can and cannot show XRD asks whether the powder is crystalline and whether the pattern matches a reference. A crystalline free-sugar lot gives sharp reflections; a spray-dried or heavily diluted powder can give a broad halo or the pattern of a crystalline carrier. That makes XRD useful for detecting crystalline diluents such as lactose, glucose or mannitol, and for comparing two sources that should be the same solid form. XRD measures neither purity nor the counter-ion, and it says nothing about the source. It also needs a reference pattern and a stated detection limit before a “match” statement means anything. For a disputed lot, XRD is strongest as one of several lines, not as a stand-alone release test. Ask for the pattern and the reference, not only the conclusion. ## What adulteration looks like Substitutions and the signals that expose them | Adulterant | What it changes | Signal | Test | Sialyllactose | Bound sugar; lower free assay; lactose present | Free assay low; large rise after hydrolysis | HPLC before and after hydrolysis | Lactose, glucose or maltodextrin | Dilution; lower assay; higher water or ash | Assay low; extra HPLC peaks; XRD carrier pattern | HPLC, water, XRD | Water | Lower as-is assay; caking | Water above 5.0%; dried-basis assay normal | Karl Fischer | Dairy extract | Milk protein and N-glycolylneuraminic acid | Milk allergen positive; Neu5Gc peak | ELISA, HPLC or LC-MS | Egg-yolk powder | Protein and lipid load; egg allergen | Protein residue; off-white to yellow colour | Protein assay, ELISA, IR Appearance is the least reliable of the signals. White to off-white covers a wide range, and a carrier can reproduce it. The stronger signals are the hydrolysis ratio, the water figure, the related-substance profile and the source-specific allergen or marker test. A certificate with appearance and assay but no hydrolysis result has not tested the substitution that matters most here. ## Writing identity into the specification - “N-Acetylneuraminic acid, CAS 131-48-6, C11H19NO9, molecular weight 309.27.” - “Identification by HPLC retention and IR spectrum, both against a reference standard.” - “Assay ≥98.0% by HPLC, with the basis and the detection method named.” - “Water ≤5.0% by Karl Fischer; pH 2.0–3.5 at 1% w/v.” - “No bound sialyllactose above the agreed limit, checked by hydrolysis and re-assay.” - “Source, allergen statement and any N-glycolylneuraminic acid limit stated for the lot.” - “Destination and form settled before the order.” ## Questions to put to the supplier - Which form is this lot, and does the certificate name N-acetylneuraminic acid and CAS 131-48-6? - Will you send the HPLC chromatogram and the IR spectrum, not just the assay figure? - Was the sample hydrolysed before the assay? What was the free-sugar result before hydrolysis? - What is the water result by Karl Fischer, and which basis was used for the assay? - What is the source, and which allergen and source-marker tests support the statement? A supplier who answers those five questions has supplied an identity file; one who answers only the assay has supplied a number. The product hub gives the catalog values. For the certificate layout, see the COA page; for the source and form choice, see the grades page; for the bound-form comparison, see the sialic acid versus sialyllactose page. The beta-glucan page is a parallel case of a specialty ingredient whose identity depends on source and structure; the HPLC method note describes the separation, and the quality page covers the release file. ### 01 What the COA for calcium L-aspartate actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-aspartate/coa/ Reviewed: 2026-11-19 The certificate for a calcium L-aspartate lot reports appearance, identification by IR and HPLC, assay by HPLC, calcium by complexometric titration, loss on drying, the heavy-metal panel, microbiology and particle size. The assay and the calcium figure answer different questions, so each needs a method and a stated basis. The release limits below are the catalog specification; the batch COA is the document that confirms a particular pack. In one lineThe assay says how much aspartate salt the lot contains; the calcium figure says how much calcium it carries, and neither number is readable without its basis. ## Reading the certificate line by line A laboratory report becomes auditable when every row names the analyte, the technique and the acceptance window. A row that offers only a tick leaves the reader unable to judge whether the method suited the question or the result sat close to the edge. Two rows carry the identity here. The IR spectrum and the HPLC retention show the aspartate ligand; the EDTA titration shows the calcium. A report with the calcium row alone has measured a mineral, not a salt. Identity, assay, calcium and contaminants · calcium L-aspartate | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | IR and HPLC | Conforms to the reference | Assay (dried basis) | HPLC | 98.0–102.0% | Calcium (as-is) | Complexometric EDTA titration | 12.0–14.0% | Loss on drying | Gravimetric | ≤6.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh ## The assay basis and the calcium basis The HPLC assay is calculated on the dried basis. The bench weighs the powder as received, measures the water, and divides the analyte figure by the dry matter. A lot at 96.0% as-is with 4.0% loss on drying therefore lands at 100.0% dried; the same 96.0% without the moisture correction would look like a failure. Calcium is handled the other way round. The titration is normally quoted as-is, because the formula weighs powder rather than dry matter. At 4.0% water, 12.5% calcium as-is is 13.02% dried; the anhydrous di-aspartate carries 13.17%, so the two agree. A dried-basis calcium near 23% points to the 1:1 salt, not to a stronger lot. Detection is the third detail. Aspartate has no useful UV chromophore, so an HPLC assay needs derivatisation, evaporative light scattering, charged-aerosol detection or refractive index. The report should name the detector and the standard; “HPLC” alone does not say how the peak was seen. The HPLC method note explains why the detector belongs beside the assay. ## Where the limit ends and the result begins An acceptance window and a measured value are different pieces of information. The window belongs in the specification column; the value belongs in the result column, with the method and the basis beside it. Copying the window into the result column turns a report into a restatement of the specification. What the result column should contain | Parameter | Release limit | Result column | Assay | 98.0–102.0% dried basis | A measured percentage, with the basis and the detector | Calcium | 12.0–14.0% as-is | A measured percentage and the titration method | Loss on drying | ≤6.0% | A measured percentage | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot A pass/fail stamp is not a substitute for the numbers. Microbiology needs a count and an absence statement; heavy metals need a figure for each element. A single total hides the element that is over. ## Lot-to-lot variation to expect Most of the movement is finishing and water: the drying step shifts the loss on drying, the mill and sieve shift the mesh, and the crystallisation step shifts colour. A mesh change is not a chemical change, and a colour shift inside the white to off-white window is not an identity failure. Colour is a weak but useful signal. A duller or greyer batch can indicate a longer drying hold or a different source while the assay still passes. Ask for the batch record before rejecting a lot on appearance. A sequence of results tells more than one lot at the edge: loss on drying rising, calcium falling, a new peak in the chromatogram. Match the lot code on the certificate to the pouch, the drum and the retained sample. ## Independent testing: when it earns its place Order an outside test for a new source, a first shipment into a regulated market, a composition claim the supplier's certificate does not prove, or a result you dispute. Choose the panel for the question rather than copying the certificate: HPLC with a named detector, EDTA calcium, loss on drying, ICP-MS, microbiology, and specific rotation if the L form is claimed. If a blend is suspected, add nitrogen and X-ray diffraction; if a crystalline calcium salt is suspected, ask for the reference pattern. Ask for the detection limit of every screen. “Not detected” without a limit says something about the method, not the sample. Keep the chain of custody short. The sample tested should be the sample retained, and the report should carry the lot. A referee laboratory needs the retained sample, the original certificate and the specification, and it should be asked for the discriminating tests rather than another calcium titration. The titration note sets out what the calcium method can and cannot show. ## Six lines for a supplier comparison Compare composition and formula, assay and basis, calcium and basis, loss on drying, identity evidence, and contaminants. Two lots can both sit at 13.0% calcium and still differ in nitrogen, rotation or water; those differences matter more than the calcium figure alone. Traceability is the second pass: manufacturing site, lot, specification revision. The catalog line is on the calcium aspartate product hub; the composition tests are on the identity page; the market file is on the compliance page; the release workflow is on the quality page. ### 02 Calcium aspartate grades: the salt composition, the hydrate and the mesh URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-aspartate/grades/ Reviewed: 2026-11-19 Calcium aspartate is sold as a family of materials, not as one powder. The name covers the di-aspartate salt used in this catalog, a 1:1 salt with a much higher calcium figure, the L and DL forms, and different water and particle-size grades. The catalog grade is the di-L-aspartate at 12.0–14.0% calcium and ≥95% through 40 mesh; the composition and the calcium figure decide the dose before the mesh does. In one lineThe name calcium aspartate does not fix the calcium figure: the di-aspartate, the 1:1 salt and the hydrate each put a different amount of calcium in the same gram. ## Why the name is not a specification Aspartic acid carries two carboxyl groups, and calcium can be associated with the aspartate in more than one ratio. In the di-aspartate, two aspartate ligands sit with one calcium ion, giving the formula C8H12CaN2O8 and about 13.2% calcium when anhydrous. In the 1:1 salt, one aspartate carries one calcium and the calcium figure is about 23.4%. Both are described as calcium aspartate in trade, and both can be sold as a white powder. The catalog grade is the di-L-aspartate, and its calcium window is 12.0–14.0%. That window already allows for a few percent of water; a hydrated lot sits at the lower end of it. The L and DL forms share a formula but not an optical rotation, and the label can name the ligand only if the certificate supports it. None of this is a purity tier. A 1:1 salt is not a cleaner version of the di-aspartate, and a hydrate is not a diluted one. They are different weigh-ups for the same label claim, and the specification has to say which one is in the drum. ## The trade descriptions side by side What the name calcium aspartate can describe | Description | Formula | Calcium | What changes | Di-L-aspartate (catalog) | C8H12CaN2O8 | 12.0–14.0% as-is; about 13.2% anhydrous | The grade supplied here; two aspartate ligands per calcium | L-aspartate, 1:1 | C4H5CaNO4 | About 23.4% | Roughly half the powder for the same calcium claim | Hydrated grade | Formula plus water of crystallisation | Below 13.2% as-is, in proportion to the water | More mass per calcium; loss on drying moves | Granulated grade | Same chemistry as the catalog | Same window | Flow and dust change; particle size moves | Dilution or blend | Carrier plus aspartate | Below the window | A different label ingredient; identity needs the ratio The first two rows are the ones that cause label errors. A buyer who compares two quotations on the calcium percentage alone may be looking at two different salts, and the one with the higher figure is not automatically the better buy: it changes the fill weight, the capsule count and the source name on the pack. ## Solubility, water and particle size The catalog material is a white to off-white, free-flowing powder. It is soluble in water, and the solution is neutral to slightly acidic; the salt dissolves without the acidulant that a sparingly soluble calcium salt would need. That is a processing property, not a statement about how the calcium behaves in the body. The water limit is ≤6.0% loss on drying. Water is the quiet variable in this grade: it raises the powder mass, lowers the as-is calcium figure and can turn a free-flowing powder into a caked one. A lot at the top of the water limit can still meet the calcium window, but the weigh-up has to use the as-is figure, not the anhydrous one. The catalog particle size is ≥95% through 40 mesh. Granulation is available on request and is a different particle-size specification, not a packing choice. If the dosage form needs a denser or freer-flowing powder, ask before the quotation; the COA page shows where the mesh line sits on the certificate. ## What the calcium figure does to the dose At 12.0–14.0% calcium, 200 mg of calcium needs 1.43–1.67 g of the salt, and 500 mg needs 3.57–4.17 g. A size 00 capsule holds roughly 600–700 mg of a mineral powder, so a 500 mg calcium claim from this grade runs to about six capsules before any excipient is added. A stick pack or a tablet is the easier home for that mass. This is the same calcium band as calcium lactate pentahydrate, which is specified at 13.0–14.0%. The two salts are close on mass per gram and far apart on the ligand; the calcium lactate page is the useful comparison when the dose is fixed and the counter-ion is still open. The citrate comparison is a different arithmetic, and it is set out on the aspartate versus citrate page. ## Writing the grade into the specification - “Calcium di-L-aspartate, C8H12CaN2O8; CAS number as stated in the catalog and on the certificate.” - “Assay 98.0–102.0% by HPLC on the dried basis; name the detector.” - “Calcium 12.0–14.0% as-is by complexometric EDTA titration.” - “Loss on drying ≤6.0%; state the water result on the certificate.” - “Identification by IR and HPLC; specific rotation positive for the L form.” - “Particle size ≥95% through 40 mesh; heavy metals and microbiology as listed.” - “No added calcium carbonate, calcium citrate or maltodextrin.” The composition clause is the one that prevents a substitution. “Calcium aspartate” alone does not say whether the lot is the 1:1 or the 2:1 salt, and a specification that leaves the ratio open cannot be enforced at the loading dock. Write the formula, the calcium window and the rotation into the same document. ## When another salt is the better fit If the label names calcium citrate or calcium carbonate, this grade is not a drop-in: the source name, the calcium figure and the fill weight all change together. If the brief is a compact high-dose tablet or a two-capsule serving, a salt with 21% calcium or more leaves less powder in the unit, and the aspartate's solubility does not compensate for the extra mass. If the process needs an effervescent reaction, the carbonate is the only common calcium salt that supplies the gas; aspartate dissolves without fizz. If the buyer specifically wants the 1:1 salt, this catalog grade is the wrong material even though the name matches. The product hub carries the catalog figures. The identity page explains how the composition is proved; the compliance page covers the source name and the destination file; the stability page covers the water and the pack. ### 02.1 Calcium aspartate vs calcium citrate: the salt, the calcium and the dose URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-aspartate/grades/calcium-aspartate-vs-citrate/ Reviewed: 2026-11-19 Calcium aspartate and calcium citrate are different salts with different calcium figures: the catalog aspartate carries 12.0–14.0% calcium and the citrate tetrahydrate 21.0–22.0%. A 500 mg calcium claim therefore needs about 3.8 g of aspartate or about 2.3 g of citrate, and the aspartate dissolves readily in water while the citrate is sparingly soluble. The label has to name the salt that is actually in the drum. In one lineAspartate carries about 13% calcium and citrate about 21.5%, so the same claim needs roughly 1.65 times the aspartate mass, and the two salts dissolve very differently. ## Two salts, two formulas Calcium aspartate is the calcium salt of the amino acid L-aspartic acid. In the di-aspartate used here, two aspartate ligands sit with one calcium ion: C8H12CaN2O8, about 304.3 g/mol. Calcium citrate tetrahydrate is the calcium salt of citric acid: C12H10Ca3O14·4H2O, about 570.5 g/mol, with three calcium ions and two citrate ions in the formula. That stoichiometry is the whole comparison. The citrate is a bigger molecule, but it carries three calcium ions and four water molecules, which is why each gram still delivers more calcium than the aspartate. The aspartate is a lighter molecule with one calcium and two amino-acid ligands, which is why it takes more powder for the same claim. Both are organic salts and neither effervesces in acid. The citrate is a buffer and contributes a sour note; the aspartate brings an amino acid and a near-neutral solution. The carbonate is the salt that fizzes, and it is not part of this comparison. ## The calcium figure, converted The specification windows are 12.0–14.0% for the aspartate and 21.0–22.0% for the citrate tetrahydrate. On the anhydrous basis the aspartate is about 13.2% calcium and the citrate tetrahydrate about 21.1%. The water in the citrate formula is part of the salt, not a defect; a hydrated lot at 21.0% is still in specification. Salt mass for a calcium claim | Calcium claim | Aspartate at 13% Ca | Citrate at 21.5% Ca | Extra aspartate mass | 100 mg | 769 mg | 465 mg | +304 mg | 200 mg | 1,538 mg | 930 mg | +608 mg | 500 mg | 3,846 mg | 2,326 mg | +1,520 mg | 800 mg | 6,154 mg | 3,721 mg | +2,433 mg The columns are planning figures, not limits. At 12.0% the aspartate needs more mass, and at 14.0% less; the citrate moves in the same way. Round only at the end, and use the as-is calcium figure for the weigh-up even when the certificate also reports a dried-basis result. ## Solubility, pH and the matrix The aspartate is soluble in water and gives a near-neutral to slightly acidic solution. A 500 mg calcium stick weighs about 3.8 g of salt; in 250 mL that is roughly 15 g/L, which dissolves without an acidulant. The citrate is sparingly soluble, and the same 500 mg claim is about 9 g/L in the same volume, above what plain water will hold. An acidic juice or a citrate buffer can carry more, but the formulator has to prove it. Solubility is a processing property, not a statement about absorption. What it decides is the format: a clear drink, a stick pack or a liquid concentrate is easier with the aspartate, while a tablet or a capsule does not care about solubility and cares about mass. Taste follows the ligand: the citrate is saline and sour, and the aspartate solution is closer to neutral, but both need a trial in the finished matrix. ## What the dose does to the unit The mass difference becomes a unit-count difference. A size 00 capsule holds roughly 600–700 mg of a mineral powder, so at a 650 mg fill a 500 mg calcium claim is about six aspartate capsules or four citrate capsules, before excipients. A 200 mg claim is about three against two, and a 100 mg claim is about two against one. A stick or a tablet absorbs the mass more easily. A 3.8 g aspartate dose fits a 5 g stick; a 2.3 g citrate dose fits a smaller stick or a large tablet. A 3.8 g tablet is possible, but it is a large unit, and the citrate leaves more room for excipients at the same calcium claim. That is the practical reason a high-dose solid usually starts with the citrate. This is also why the aspartate and calcium lactate sit in the same conversation: both are specified near 13–14% calcium, so both need about 3.8 g for a 500 mg claim. The calcium lactate page makes the comparison when the ligand is still open and the dose is fixed. ## The source name and the label In the European Union the ingredient list names the calcium source as it appears in Annex II to Directive 2002/46/EC, and the nutrition declaration gives calcium in milligrams and as a percentage of the 800 mg reference intake. In the United States the Supplement Facts panel declares elemental calcium against a 1,300 mg Daily Value and the ingredient list names the salt. The United Kingdom uses the 800 mg reference intake in its retained nutrition labelling. The source name is not interchangeable. A product made with calcium citrate cannot declare calcium aspartate, and a blend has to name both sources. If the salt changes at a fixed powder weight, the calcium figure moves; if the calcium claim stays fixed, the powder weight and the unit count move. Either change needs a new label and a new batch record. The compliance page covers the destination route and the source-list question. ## Choosing between them Where each salt fits the brief | Situation | Aspartate | Citrate | Clear drink or stick | Dissolves readily; near-neutral | Sparingly soluble; needs acid or volume | Compact high-dose solid | About 1.65 times the mass | About 21.5% calcium; fewer units | Label names one source | The only match if it says aspartate | The only match if it says citrate | Acidic, sour matrix | Near-neutral; trial the pH | Sour note; buffers the matrix | Effervescent tablet | No gas | No gas; the carbonate is needed Choose the aspartate when solubility and a near-neutral solution decide the format, and the larger mass fits the stick or the tablet. Choose the citrate when the calcium claim is high, the unit is compact and the mass budget is tight. Then trial the fill weight, the taste and the pH before the label is fixed. The aspartate hub and the citrate hub carry the two catalog specifications. The grade page sets out the aspartate compositions; the identity page explains how the salt is proved; the calcium titration note covers the method; the quality page describes the release file. ### 03 Calcium L-aspartate stability: moisture, the solution and the pack URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-aspartate/stability/ Reviewed: 2026-11-19 The dry powder is stable while it stays sealed and dry. The two practical risks are moisture pickup, which lowers the as-is calcium figure and causes caking, and microbial growth in a dissolved or high-water matrix. Heat, light and reducing sugars can move colour and assay in a formula, so the shelf life belongs to the pack and the matrix rather than to the salt name. In one lineThe powder keeps while it stays dry and sealed; a dissolved or high-water matrix is where the shelf life is decided. ## The powder: water is the first variable The catalog sets loss on drying at ≤6.0%. That is a release gate, not a storage allowance. The powder is hygroscopic, and an opened pouch in a humid room will pick up water. The loss on drying rises, the as-is calcium figure falls and the powder can cake into lumps that no longer flow through a hopper. Water is also a label issue. A lot at 13.0% calcium as-is with 2.0% water is about 13.27% on the dried basis; the same powder at 6.0% water is about 13.83% dried. The dried figure looks stronger, but the weigh-up still sees the wet powder. Both numbers can be correct and still describe different masses. Keep the powder in its original foil pouch or an opaque, moisture-barrier container, and close it after each use. A desiccant helps in a humid store, but it is not a substitute for a seal. The 25 kg fiber drum relies on its inner liner, so keep the liner closed and record the date of opening. The loss-on-drying entry explains why the result is reported beside the assay. ## The solution: a microbiological matrix The salt dissolves in water to give a near-neutral solution. That is convenient for a stick pack or a drink mix, and it is also a favourable environment for microorganisms. A bulk-powder microbiological result does not cover a prepared solution that is held warm for hours before filling. Heat, light and pH act together in solution. A hot-fill or pasteurisation step adds a heat load that the powder never sees, and a clear bottle on a bench adds light. Reducing sugars are a separate risk: an amino acid salt in a sweetened matrix can brown during storage, especially at elevated temperature. The colour change is a formula signal, not necessarily an assay loss, but both need to be measured. If a liquid is unavoidable, validate the hold time at the process pH and temperature, protect the solution from light, and decide whether a preservative or a sterile process is needed. That is a formulation and food-safety decision; it does not follow from the certificate. ## What drives change during storage Factors that move calcium L-aspartate in storage and in formula | Factor | What it does | Control | Moisture | Raises loss on drying; lowers the as-is calcium; caking | Sealed foil; dry store; close the liner | Heat | Accelerates browning and moisture movement | Controlled store; cool process | Light | Colour change at the surface and in solution | Opaque pack; dark store | Oxygen | Surface colour change in a high-water matrix | Low headspace; sealed pack | pH | Changes solution behaviour and the taste of the matrix | Validate the matrix pH | Reducing sugars | Browning in a sweetened, warm matrix | Trial the sugar system; control water activity | Metal ions | Colour and complexation in a liquid | Avoid iron and copper contact These factors are not independent. A warm, humid store is worse than the sum of two separate effects, and a sweetened solution in clear glass combines moisture, heat, light and sugar chemistry at once. The useful question is not whether the salt is stable, but in which pack, at which condition and for how long. ## A stability protocol for the ingredient and the pack A useful protocol names the pack, the storage condition, the time points and the tests. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% relative humidity cover the warehouse; accelerated storage at 40 °C/75% relative humidity stresses the pack. A light-exposure arm covers the failure mode that a dark incubator misses. Test assay, calcium, loss on drying, appearance, microbiology and pH in solution at each point. For a stick or a drink, repeat the work in the matrix at the process pH and heat load. The report should show the individual results and identify the pack and the lot family, not only a pass statement. Ask for the stability summary for the pack you will buy. A 25 kg drum and a 1 kg pouch have different headspace and different opening histories, so the data belongs to the pack. The microbiology method note explains why the count and the absence tests are reported separately. ## The finished formula changes the answer A capsule or tablet has low water activity, but the shell and the excipients can still transfer moisture. Check loss on drying at release and after storage, and check the appearance of the fill. A stick pack depends on the seal and the foil; a pinhole is a failure, and the strip should be inspected, not only the powder. A drink combines light, pH, heat and oxygen, and a gummy adds a high-water cook step. The ingredient's bulk stability is the starting point, not the answer. An overage is a formulation and label decision; it does not repair a pack that lets moisture in, and it should not be used to cover a matrix that was never tested. ## How the shelf life is set We do not publish a single shelf-life number for calcium L-aspartate, because the pack and the storage condition set it. The assigned retest period belongs on the specification and is supported by the stability file for that pack. A number without a pack, a condition and a test panel is not a shelf life; it is a claim. After the retest period, re-assay the retained sample before extending use. Do not extend by assumption, and do not carry a bulk figure across to a repacked container. Do not copy a shelf life from calcium citrate or calcium lactate either: the water content, the solubility and the matrix behaviour are different, even when the calcium figure is close. The product hub lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the quality page describes the release workflow. ### 04 Calcium L-aspartate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-aspartate/moq/ Reviewed: 2026-11-19 The MOQ for calcium L-aspartate is 1 kg, supplied as a 1 kg foil pouch; the standard bulk pack is a 25 kg fiber drum. The quoted lead time is 1–7 days for the standard pack. A firm quotation needs the salt composition, the calcium and assay basis, the quantity and pack, the destination and Incoterm, the documents and the intended market, because those six details decide whether the offer and the label describe the same material. In one lineThe 1 kg pouch is the smallest unit that carries its own lot code, certificate and retained sample, so it is the minimum order and the qualification sample at once. ## Why the minimum is 1 kg A 1 kg pack covers a bench-scale trial, a retained sample and an independent identity test. It is small enough to ship as a parcel and large enough to be drawn from a single released lot, so the sample, the trial and the first production batch can be traced to the same certificate. Below 1 kg, the material is usually split from a larger lot and repacked. That adds handling, loses the original pack identity and makes traceability harder without changing the chemistry. The 25 kg drum is the bulk unit: it reduces handling per kilogram but commits inventory and a longer storage period. The MOQ is a pack decision, not a volume incentive. ## Packs and formats Standard calcium L-aspartate packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Particle-size specification changes | Split from bulk | On request | Bench work below 1 kg | A repack with its own traceability record The catalog form is a 40 mesh powder: ≥95% through 40 mesh. Granulation is a different particle-size specification, not a packing choice, and a split from bulk is a repack, not the catalog pouch. If the dosage form needs a coarser or freer-flowing powder, say so before the quotation, because the change moves the mesh line and may move the lead time. ## Lead time and dispatch The standard pack is quoted at 1–7 days from order confirmation. That window covers picking, document preparation and dispatch; it does not include the shipping transit, customs clearance or the customer's own quality release. A custom granulation, a dilution or a non-standard pack adds time, and the quotation should state it separately. Ask for the dispatch date, not only the lead time. A 25 kg drum may travel on a pallet and a 1 kg pouch may travel as a parcel; the Incoterm decides who books the freight and who clears the entry. The documents should travel with the lot, not after it. The logistics page covers the shipping and document flow. ## What a quotation needs Six items make a quotation firm enough to compare: - Product and composition. Calcium di-L-aspartate, with the formula and CAS number written out, not only the trade name. - Specification. Assay and its basis, calcium window, loss on drying, particle size, heavy metals and microbiology. - Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated or split variant. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, specification, SDS, and any market-specific statement the importer needs. - Intended use and market. Supplement, food or another use, and the market where the finished product will be sold. A quotation without the composition and the market is incomplete. The same powder can be suitable for one destination and outside the file for another, and the paperwork is part of the offer. We do not publish commercial terms on this page; they are stated on the quotation. ## The sample is a lot, not a demonstration The 1 kg pack is the qualification sample. Test identity, assay, calcium, loss on drying and microbiology before scaling, and keep a retained sample from the same pack. The lot code on the sample, the COA and the quotation should match. A sample that cannot be traced to a lot is a demonstration, not a qualification. If the project needs less than 1 kg for a bench trial, discuss it before ordering. A split from a bulk lot is a repack with its own traceability, not the catalog pack, and it should be documented as such. Do not assume that a bench sample and the production drum will come from the same lot. ## Terms to settle before the first order The quotation sets out the commercial terms, the Incoterm, the pack, the lead time and the documents. The quality terms belong beside them: the specification revision, the COA per lot, the retained sample, the retest period and the change-control route. A quality agreement is worth having before the first production order, not after the first dispute. Returns and replacements follow the quotation and the quality agreement. A lot that fails the agreed specification should be handled through the retained sample and a joint re-test, not through a photograph of the powder. Ask who pays for the referee test and which laboratory is acceptable to both sides. The product hub carries the catalog specification; the COA page lists the release tests; the compliance page covers the market files; the MOQ glossary entry defines the term; the quality page describes the release file. ### 05 The regulatory file for calcium L-aspartate URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-aspartate/compliance/ Reviewed: 2026-11-19 The file starts with the exact material: calcium L-aspartate, its composition and calcium figure, the specification revision and the lot certificate. The destination route, the permitted-source question, the contaminant limits and the label are separate checks, and the buyer's regulatory team confirms them for the market where the finished product is sold. This page lists the documents and the questions that belong in that file; it does not decide the route. In one lineThe specification describes the powder, the certificate describes the lot, and the regulatory file has to show that both fit the destination and the label. ## What the file contains A complete file answers four practical questions. What is the material, and which specification revision is being bought? Which lot is being released, and what does its certificate report? Which source, contaminant and label rules apply to the finished product in the destination? And what changes if the source, the process or the pack changes? The certificate answers the lot question, the technical data sheet answers the specification question, and the safety data sheet answers the handling question. None of them answers the route question on its own. The file should also hold the allergen and GMO statements, the origin record, the residual-solvent statement and any customer-specific declaration. Keep a version list. A folder of undated PDFs is not a regulatory file; a table that names each document, its version, its date and the specification revision it supports is. Where a statement is not available for the lot, name the gap before the order rather than discovering it at the port. ## European Union The EU file is built from the specification, the contaminant results and the label. General food law under Regulation (EC) No 178/2002 applies, and food supplements are placed under Directive 2002/46/EC, whose Annex II lists permitted vitamin and mineral sources. Labelling follows Regulation (EU) No 1169/2011, contaminants follow Regulation (EU) 2023/915, and claims follow Regulation (EC) No 1924/2006. If the ingredient is added to a food rather than supplied as a supplement, Regulation (EC) No 1925/2006 may be the relevant addition instrument. The permitted-source list names specific calcium salts. The buyer's regulatory team checks whether the aspartate form is named for the destination, and whether another route, including the novel-food framework of Regulation (EU) 2015/2283, applies. This page does not assert that the material is authorised or permitted in any market; that determination belongs to the buyer's team, with the current consolidated text as the reference. Great Britain and Northern Ireland are checked separately. The GB file uses the retained GB rules and register, while Northern Ireland follows the EU framework. The destination decides which file applies. ## United States The US file is built around the exact dietary ingredient and its intended use. A dietary supplement is placed under the DSHEA framework, with current good manufacturing practice in 21 CFR Part 111 and the Supplement Facts panel in 21 CFR 101.36. If the ingredient has not been marketed in the US before, the new dietary ingredient notification route in 21 CFR 190.6 may apply; the buyer's team confirms the basis and the evidence. Structure and function statements are governed by 21 CFR 101.93 and require the disclaimer; disease claims are not permitted. FDA does not approve a supplement or its label before sale, so the absence of an objection is not an approval. The label and the claim are reviewed separately from the certificate. ## Contaminants and limits The contaminant panel is a finished-product calculation, not only a drum result. The table below is the usual starting point for a food-supplement file; the current destination text and the daily dose decide the final limit. The specification limits on the certificate and the regulatory limit on the finished product are different gates, and the lower of the two governs the purchase. Contaminant limits to confirm for the finished product | Parameter | Typical supplement reference | What the file should show | Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method, limit and the finished-product calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception that applies | Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result and method | Arsenic (As) | Customer or market limit | The agreed limit and the method, stated on the certificate The calculation runs from the as-is calcium figure and the daily dose. A supplement that delivers 500 mg calcium from this salt carries about 3.8 g of the ingredient, so a lead result in mg/kg is multiplied by that mass, not by the capsule weight. The heavy-metals entry sets out the panel and the methods. ## Label and claims The label names the material, the quantity and the source in the form the destination requires. The claim review is separate: the brand's regulatory reviewer confirms that the wording is allowed for the product, the form and the market. A nutrient content or health claim has to come from the authorised list, meet its conditions and use the permitted wording. The certificate does not approve a claim, and a claim does not change the specification. This page makes no claim about the ingredient. It describes a specification, a certificate and a file. It is not a label text, and the editorial policy explains how the technical pages are kept separate from marketing wording. The grade page covers the composition choice that the label has to name. ## Documents in the file Documents and the question each one answers | Document | Question it answers | What to check | Specification | What is being bought? | Composition, formula, calcium window, assay basis, mesh | Batch COA | What was released? | Lot, methods, results, limits and the identity evidence | Technical data sheet | How does the grade behave? | Solubility, pH, water, particle size and storage | Safety data sheet | How is it handled? | Hazard, dust, storage and transport information | Declarations | Does it fit the market? | Allergen, GMO, origin, residual solvents and change control ## Checklist before the first order - The composition, formula and specification revision are named. - The calcium and assay results are reported on stated bases. - COA, TDS, SDS, allergen, GMO, origin and residual-solvent statements are on file. - The contaminant results are converted to the finished-product dose. - The destination route and the label wording have been reviewed by the buyer's team. - The source, process and pack are under change control. - The quotation, the specification and the certificate refer to the same version. The product hub carries the catalog specification; the COA page explains the lot certificate; the identity page covers the analytical evidence; the EU regulatory notes and the US notes give the framework; the quality page describes the release file. ### 06 How we prove a calcium L-aspartate lot is the named salt URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-aspartate/identity/ Reviewed: 2026-11-19 Identity rests on four agreeing measurements: the document names the composition, IR and HPLC show the aspartate, the calcium titration gives the calcium figure, and the nitrogen or mass balance shows the two ligands per calcium. The calcium figure alone cannot separate the di-aspartate from the 1:1 salt, a blend with calcium carbonate or a dilution. The certificate has to pair the formula with the result. In one lineThe calcium figure is only half the identity: the aspartate has to be shown, and the calcium-to-nitrogen ratio has to fit the formula on the label. ## The identity layers A certificate can carry the right name and still fail to prove the powder. The layers below are separate questions, and each one needs its own evidence. A supplier who answers only the first has described the paperwork, not the material. Layers of calcium L-aspartate identity | Layer | Question | Test | What it proves | Document | Is the composition named? | Name, formula, CAS number | Paperwork only | Spectroscopy | Is the aspartate present? | IR spectrum against a reference | The ligand, not the ratio | Chromatography | Is the aspartate the named one? | HPLC with a named detector | The amino acid, not the calcium | Titration | How much calcium is there? | Complexometric EDTA titration | The element, not the salt | Mass balance | Does the ratio fit the formula? | Loss on drying and nitrogen | The di-aspartate composition | Optical form | Is it the L form? | Specific rotation | L versus DL, not purity No single row is enough. IR plus calcium fits several aspartate salts; calcium plus nitrogen fits the di-aspartate but not the optical form; rotation fits the L form but says nothing about the counter-ion. Read them together. ## The calcium-to-nitrogen ratio The di-aspartate formula, C8H12CaN2O8, carries one calcium and two nitrogen atoms. On the anhydrous basis that is 13.17% calcium and 9.21% nitrogen, a calcium-to-nitrogen mass ratio near 1.43 and a molar ratio of 1:2. A lot at 12.8% calcium should sit near 8.9% nitrogen; a lot that reads 12.8% calcium and 4.0% nitrogen is not the same salt. The 1:1 salt, C4H5CaNO4, carries 23.4% calcium and 8.2% nitrogen. Its calcium-to-nitrogen ratio is close to 2.9, double the di-aspartate ratio. That difference is the quickest way to tell the two trade forms apart when the certificate gives only a calcium figure and an assay. Report the results on stated bases. Calcium is usually as-is because the weigh-up uses it; nitrogen and assay are often on the dried basis. At 6.0% water, a 13.2% anhydrous calcium figure becomes 12.4% as-is. A blend with maltodextrin lowers both calcium and nitrogen in proportion, while a blend with calcium carbonate raises calcium and lowers nitrogen. The titration note covers the calcium method and its limits. ## X-ray diffraction: the solid-state check X-ray diffraction asks whether the solid is crystalline and whether the pattern matches a reference. For this product it is most useful as a screen for a crystalline calcium salt that should not be there: calcite from calcium carbonate has sharp, characteristic peaks, and crystalline aspartic acid has its own pattern. An amorphous spray-dried powder gives a broad halo instead. XRD is not a purity assay and does not measure the counter-ion. It also does not quantify a blend at low levels without a validated method. Ask for the reference pattern and the detection limit before reading a “match” statement. For a disputed lot, XRD plus calcium plus nitrogen plus rotation is stronger than any one of them. The method is not a routine release test here, and a certificate that reports only “XRD conforms” without the pattern has added little. Use it when the question is solid form or a crystalline adulterant, not when the question is assay. ## What adulteration looks like Common calcium L-aspartate substitutions and the signals | Adulterant | What it does | Signal | Test | Calcium carbonate | Raises calcium; lowers nitrogen; fizzes in acid | Calcium high, nitrogen low, acid gas | Nitrogen, acid test, XRD | Calcium citrate | Raises calcium; adds citrate | Calcium high; citrate reaction | Citrate identity, HPLC | Maltodextrin or carrier | Lowers calcium, nitrogen and assay | All three low; mass balance short | Assay, nitrogen, LOD | L-aspartic acid | Lowers calcium; raises the acid taste | Calcium low; pH low | Calcium, pH, HPLC | DL-aspartate | Same calcium figure; wrong optical form | Rotation near zero | Specific rotation The calcium figure is the weakest single signal because several calcium salts raise it. Nitrogen is the better counter-check for this product, and rotation is the only check for the L form. A certificate that reports calcium and assay but no nitrogen, rotation or IR has left the most likely substitutions untested. ## Writing identity into the specification - “Calcium di-L-aspartate, C8H12CaN2O8; CAS number as stated in the catalog.” - “Assay 98.0–102.0% by HPLC on the dried basis; name the detector.” - “Calcium 12.0–14.0% as-is by complexometric EDTA titration.” - “Identification by IR and HPLC; specific rotation positive for the L form.” - “Loss on drying ≤6.0%; nitrogen consistent with the di-aspartate ratio.” - “Particle size ≥95% through 40 mesh; heavy metals and microbiology as listed.” - “No added calcium carbonate, calcium citrate or maltodextrin.” The composition and the exclusion clause belong in the same specification. A clause that names the salt but not the ratio can be met by two different powders, and a clause that names the ratio but not the optical form can be met by the DL material. ## Five questions for the supplier - Which composition is this lot: the di-aspartate, the 1:1 salt or a blend, and which formula is on the certificate? - Can you provide the IR spectrum and the HPLC chromatogram with the detector named? - What are the calcium, nitrogen and loss on drying results, and on which bases? - What is the specific rotation, and does it confirm the L form? - If the lot is disputed, will you accept a joint re-test on the retained sample? Five direct answers amount to an identity file. A single calcium percentage does not. The product hub carries the catalog specification; the COA page shows where each figure sits on the certificate; the grades page compares the compositions; the FTIR note and the XRD note explain the solid-state methods; the quality page describes the release file. ### 01 What the calcium carbonate COA reports, line by line URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-carbonate/coa/ Reviewed: 2026-11-19 A calcium carbonate certificate reports appearance, identification, the assay by complexometric titration, elemental calcium, loss on drying, acid-insoluble matter, heavy metals, microbiology and particle size. Each line should carry its method and release limit, with the measured result in a separate column. The assay and the calcium figure are not the same measurement, and the certificate is only auditable when both are stated with their basis. In one lineThe assay and the calcium figure answer different questions, and the certificate is only auditable when both carry their method, their limit and the result for the lot. ## The certificate as a test report A certificate is a test report, not a label. Each parameter needs the measurement, the method and the limit the lot was released against. A row that says only “conforms” asks the reader to trust a conclusion without the evidence behind it. Appearance is descriptive; identification, assay and acid-insoluble matter are the lines that describe the material. The certificate should name its identification tests; the catalog requires infrared and titration. The assay is a complexometric titration of calcium with EDTA, and the calculation then expresses the result as CaCO₃. Acid-insoluble matter is a gravimetric residue left after acid digestion, and it is the line that shows mineral grit rather than carbonate. Release parameters for calcium carbonate | Parameter | Method | Release limit | Identification | Infrared and complexometric titration | Conforms to the reference | Assay | Complexometric titration, calculated as CaCO₃ | ≥99.0% | Calcium | Complexometric titration | 39.0–41.0% | Loss on drying | Gravimetric, oven | ≤1.0% | Acid-insoluble matter | Gravimetric after acid digestion | ≤0.2% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh Acid-insoluble matter is small in a precipitated grade and larger in a ground grade, because the residue carries the mineral fraction of the deposit. Particle size is a finishing specification, so it can move with the mill without any change in the chemistry. ## The assay basis and the calcium arithmetic Calcium carbonate has no water of crystallisation. Loss on drying measures surface moisture, and the oven test does not decompose the carbonate; calcination needs a kiln. That makes the basis simpler than for a hydrate, but the certificate should still state whether the assay is calculated on the dried basis or as received, and the calcium line should use the same basis. The arithmetic links the two calcium lines. Calcium is 40.04% of CaCO₃ by mass, so an assay of 99.0% corresponds to 39.64% calcium. The catalog calcium window of 39.0–41.0% spans about 97.4–102.4% CaCO₃, which is wider at the bottom than the ≥99.0% assay gate. A lot at 39.3% calcium passes the calcium window and fails the assay. The assay is the release gate. The titration measures calcium, not carbonate. A partially calcined lot, or a blend with calcium oxide or hydroxide, titrates as calcium and can report a high calcium figure while its carbonate content is lower. The acid reaction and the acid-insoluble line are the supporting evidence; carbon dioxide by acid gravimetry is the direct check, and the identity page sets out how the figures combine. ## Release limit versus batch result The release limit is the acceptance boundary for the lot. The batch result is what the laboratory measured on that lot. Both belong on the page, with the method beside them. A result column filled with the specification range is not a result; it is a copy of the gate. What the result column should contain | Parameter | Release limit | Result column | Assay | ≥99.0% as CaCO₃ | A measured percentage, with the method and the basis | Calcium | 39.0–41.0% | A measured percentage of the element | Loss on drying | ≤1.0% | A measured percentage | Acid-insoluble matter | ≤0.2% | A measured percentage and the acid used | Lead | ≤3 mg/kg | A measured figure with the limit of quantification | Particle size | ≥95% through 40 mesh | The measured percentage through the sieve “Passes specification” is a conclusion; the reader should be able to reach it from the numbers. Heavy metals need a figure per element, not a total, because a sum hides the element that matters. Lead is the first to read, and its margin against the limit is more informative than a bare pass. ## What moves between batches Precipitation conditions, the lime source and the carbonation endpoint move the particle size and the crystal form. A change from calcite to aragonite can change the bulk density and the acid reaction rate without moving the assay. Milling moves the particle distribution and the acid-insoluble residue; drying and packing move the moisture. None of those changes is visible in a single assay figure. Whiteness is the least quantitative line. A precipitated and a ground grade can both be white, and a shell grade can carry a faint tone from residual organic matter. A colour shift is a reason to ask about the source, not a release failure by itself. Lead is the line to trend. A lot at 0.3 mg/kg and the next at 2.4 mg/kg are both inside a 3 mg/kg limit, and the pair says something neither result says alone. For a shell grade, ask for lead with its limit of quantification on every lot. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a shell grade, a disputed crystal form or a source claim on the label. The panel is calcium by EDTA with the pH and indicator, carbon dioxide by acid gravimetry, acid-insoluble matter, lead and the heavy-metal panel by ICP-MS, loss on drying, microbiology and particle size. Add X-ray diffraction when the crystal form or the source is in question. Ask the laboratory what it can see. A lead result of “not detected” without a limit of quantification is a statement about the method, not about the lot. A carbon dioxide figure without the sample mass and the moisture correction is hard to audit. The report should identify the lot, and the sample tested should be the sample retained. Source claims need documents rather than a test. X-ray diffraction can show a calcite or an aragonite pattern; it cannot show that the carbonate came from an oyster. The shell record, the supplier declaration and the chain of custody answer that question. ## What to compare between suppliers Put six lines side by side: source and crystal form; assay and calcium; loss on drying; acid-insoluble matter; lead with its limit of quantification; particle size and bulk density. Two quotations that agree on assay but differ on source or acid-insoluble matter are not describing the same powder. Bulk density and flow are not on the catalog specification, so ask for them when the powder is going into a capsule or a tablet. The calcium carbonate product page carries the catalog figures. The grade comparison covers the source choice, the source comparison takes the lead and label questions further, the compliance page covers the market file, the methods index describes the tests, and the quality page describes the release workflow. ### 02 Precipitated, ground or oyster shell: choosing a calcium carbonate grade URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-carbonate/grades/ Reviewed: 2026-11-19 Calcium carbonate is sold as precipitated (PCC), ground (GCC) and oyster-shell powder, and the three differ in source, particle control, acid-insoluble matter and lead profile before they differ in assay. All three are CaCO₃, but a specification written for one is not a specification for another. The choice follows the dosage form, the label claim and the contaminant margin. In one linePrecipitated, ground and oyster-shell carbonate share the formula but not the specification: source, particle control, acid-insoluble matter and lead are what separate them. ## Why one formula needs three specifications Precipitated calcium carbonate is made by calcining limestone to quicklime, slaking it to milk of lime and carbonating the suspension with carbon dioxide. The reaction is controlled, so the particle size, the crystal form and the impurity profile can be set within narrow windows. Ground calcium carbonate is mined limestone, chalk or marble that is crushed and milled; the deposit decides the chemistry, and the mill decides the particle distribution. Oyster-shell carbonate is a biogenic material that is cleaned and milled, and its trace elements come from the water the animal grew in. The three routes can all deliver a powder that titrates at ≥99.0% CaCO₃. What they do not deliver equally is a low acid-insoluble residue, a narrow particle distribution, a known crystal form or a lead result with a wide margin. A purchase order that says only “calcium carbonate” has named the molecule and left the grade open. ## The three sources side by side Precipitated, ground and oyster-shell calcium carbonate | Property | Precipitated | Ground | Oyster shell | Source route | Lime, slaked and carbonated | Mined deposit, milled | Shell, cleaned and milled | Crystal form | Calcite or aragonite, set by process | Mainly calcite; confirm by XRD | Mainly calcite; confirm by XRD | Particle control | Narrow, engineered | Broad, set by the mill | Variable, set by the shell and mill | Acid-insoluble matter | Low and consistent | Deposit-dependent, usually higher | Measured per lot | Lead question | Process-controlled; still measured | Deposit-dependent | Environmental; the closest watch | Source on the label | Calcium carbonate | Calcium carbonate | Calcium carbonate, source claim if true | Usual fit | Capsules, tablets, tight specs | General food and supplement use | Source-led brands with full traceability The last row is a starting point, not a rule. A ground grade with a good deposit and a controlled mill can meet a supplement specification, and a precipitated grade can be the wrong powder for a tablet that needs bulk. The grade is a set of measured properties, not a hierarchy. The catalog grade here is precipitated at 40 mesh; the ground and shell columns are the alternatives to compare against it. ## Particle, density and the acid reaction The catalog fixes one physical line: ≥95% through 40 mesh. Bulk density, tapped density, flow, whiteness and the crystal form are not on that list, and they are the properties that decide how the powder runs. A fine precipitated grade occupies more volume per gram, flows less freely and may need granulation before it can be filled at speed. A ground grade is usually denser and flows better, with a wider particle distribution that can segregate in a blend. Acid reaction rate follows the surface area and the crystal form. A finer powder and an aragonite-rich powder dissolve faster in acid than a coarse calcite powder, which matters in an effervescent tablet and in a stick that is mixed with an acidulant. The reaction is visible: the carbonate releases carbon dioxide, and the foam is the evidence that the acid has reached the particles. Colour is a weak specification. All three sources can be white, and a shell grade can carry a faint grey or cream tone from residual organic matter. Ask for a colour standard and a source declaration rather than reading a whiteness number as a purity figure. ## Dose arithmetic and the dosage form Calcium carbonate is 40.04% calcium by mass, so 500 mg of elemental calcium needs 1.25 g of the salt, 200 mg needs 500 mg, and 800 mg needs 2 g. The same claim needs about 2.3 g of calcium citrate tetrahydrate at 21.5% calcium, or about 3.7 g of calcium lactate pentahydrate at 13.5%. Carbonate is the compact choice for a high claim in one or two units; the organic salts are the choice when the dose has to dissolve or the taste has to change. The dosage form follows the mass. A 500 mg calcium claim is 1.25 g of carbonate, which fits a large tablet or two 600–700 mg capsules. A stick can carry it, but the chalky mouthfeel grows with the dose, and a gummy with an acidulant will react with the carbonate during cooking unless the gas is managed. An effervescent tablet is the format where the chemistry is the point: 1.25 g of carbonate releases about 0.55 g of carbon dioxide when it dissolves. Two sources with the same assay can still behave differently in the press and the capsule filler. Run a trial on the grade that will be bought, not on a sample of a different source, and check the fill weight, the hardness and the taste before the label is printed. ## What to write into the specification - “Calcium carbonate, precipitated [or ground, or oyster shell], CAS 471-34-1, CaCO₃.” - “Assay ≥99.0% as CaCO₃ by complexometric titration; calcium 39.0–41.0%.” - “Loss on drying ≤1.0%; acid-insoluble matter ≤0.2%.” - “Heavy metals Pb ≤3, As ≤2, Cd ≤1, Hg ≤0.1 mg/kg; microbiology as listed.” - “Particle size ≥95% through 40 mesh; state bulk density and flow if the powder is to be filled.” - “Source declared; crystal form declared if claimed; no calcium oxide, calcium hydroxide or magnesium carbonate added.” The source line is not decoration. A change from precipitated to ground, or from ground to shell, is a change of specification and a change of the label claim, even when the assay result is the same. Write the source into the specification and put it under change control. ## When carbonate is the wrong choice If the product needs a clear solution, carbonate is the wrong salt: it is practically insoluble in water and dissolves only by reacting with acid. If the matrix is acidic and must stay clear, the carbonate will neutralise the acid, raise the pH and release gas; calcium citrate or calcium lactate is the practical starting point. If the label names citrate or lactate, the carbonate cannot be substituted, and the reverse is also true. If the brand needs a source story, the shell grade only works when the traceability and the lead data support the claim. If the finished product needs a vegan claim, an oyster-shell source is animal-derived and does not fit. The carbonate versus oyster shell page takes the source, the lead arithmetic and the label further. The calcium carbonate product page carries the catalog figures; the COA page shows how the lines are reported; the compliance page covers the market file; the calcium citrate page and the calcium lactate page cover the other two salts. ### 02.1 Calcium carbonate vs oyster shell calcium: source, lead and the label URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-carbonate/grades/carbonate-vs-oyster-shell/ Reviewed: 2026-11-19 Oyster-shell calcium is calcium carbonate from a biogenic source, not a different molecule: the assay can be the same ≥99.0% and the calcium the same 39.0–41.0%, while the lead profile, the traceability and the label claim differ. The source has to be declared, the lead has to be measured against the finished dose, and a shell claim is only defensible when the lot and its records support it. For a high-dose tablet, the raw-material lead limit is set from the finished-product limit, not copied from it. In one lineOyster shell is a source of calcium carbonate, not a grade of purity; the lead result, the traceability and the label claim are what change. ## What “oyster shell calcium” actually is The shell of an oyster is a biogenic calcium carbonate structure, mostly calcite with regions of aragonite. A shell grade is cleaned, crushed and milled, and the product is still CaCO₃ with the same formula and CAS number. The difference is the supply chain behind it: the animal, the water it grew in, the cleaning process and the record that connects the powder to the shell. A calcined shell product is a different material. Heating shell carbonate drives off carbon dioxide and leaves calcium oxide, which hydrates to calcium hydroxide on exposure to moisture. That product is no longer calcium carbonate and cannot be declared as such without checking the lot. Ask which process the supplier runs before reading the assay. The shell route is an environmental sample rather than a chemical synthesis. Lead and cadmium can accumulate from water and sediment, and the shell can carry protein, membrane and grit that the cleaning step has to remove. The specification has to measure those things; the word “oyster” does not answer them. ## The same release limits, a different source file Precipitated or ground carbonate against oyster-shell carbonate | Property | Precipitated or ground | Oyster shell | Source declaration | Chemical route or mined deposit | Shell, with species and origin | Assay and calcium | Catalog limits apply | The same catalog limits apply | Acid-insoluble matter | Process or deposit controlled | Measured per lot; shell grit and residue | Lead and cadmium | Measured per lot | Measured per lot, with the closer watch | Crystal form | Calcite or aragonite, set by process | Mainly calcite; confirm by XRD | Organic residue | Not expected from the route | A source-specific question for the cleaning record | Traceability | Mine or plant lot | Shell lot, processor and origin record The catalog limits are the release gate for all three sources. What differs is the evidence: a shell lot needs a source declaration, a cleaning record and a traceability chain. A specification that lists assay and heavy metals but not the source has not described a shell grade. ## The lead arithmetic from drum to tablet The finished-product limit is set on the supplement, not on the raw material. The usual EU supplement reference for lead is 3.0 mg/kg, and a high-dose calcium tablet is mostly carbonate: a 1.5 g tablet carrying 1.25 g of calcium carbonate is about 83% carbonate by mass. If the raw material sits at 3.0 mg/kg, the tablet starts at about 2.5 mg/kg before any excipient or process contribution. That leaves almost no room to meet a 3.0 mg/kg finished limit. The raw-material limit therefore has to be derived. At 1.0 mg/kg, the same tablet starts at about 0.83 mg/kg, which leaves room for excipients and analytical uncertainty; at 0.5 mg/kg it starts at about 0.42 mg/kg. A 2 g powder dose at 1.0 mg/kg delivers 2 µg of lead per day, so the daily dose, not the drum, is the number the file defends. Ask for lead with its limit of quantification on every shell lot. A pass at 2.8 mg/kg and a pass at 0.2 mg/kg are both passes against the same limit, and they are not the same risk. Cadmium follows the same arithmetic. A source without a consistent lead trend has not given the buyer a basis for a high-dose product. ## What the label may say about the source In the EU, the ingredient list names the calcium source, and calcium is declared in milligrams and as a percentage of the 800 mg reference intake. “Oyster shell” can appear as a source descriptor when the lot is genuinely shell-derived; it is not a second ingredient and it does not change the declared calcium. In the US, the Supplement Facts panel declares elemental calcium against the Daily Value of 1,300 mg, and the ingredient list names calcium carbonate. A source claim on the front has to match the ingredient list and the lot record. If the front says “oyster shell” and the drum is mined, the label is wrong even when the assay is identical. A blend of shell and mined carbonate has to name the blend rather than imply a single source. Some claims should not be made at all. “Lead-free” is not defensible; a result below the limit of quantification is a statement about the method, not a guarantee of zero. “Purified” needs a definition the file can support. A vegan claim does not fit an animal-derived shell, and the mollusc source raises an allergen question for the buyer's team. The label names the source the market file covers, not the one the front of the pack prefers. ## When the shell source is worth it, and when it is not Choose the shell grade when the records support the source story, the lead and cadmium results leave a margin at the finished dose, and the label review accepts the wording. Choose precipitated carbonate when particle size and lead have to be tightly controlled, and ground when the deposit and the mill can meet the specification. Each is a supply decision that changes the file. Do not choose shell for a vegan claim, a high-dose tablet with a thin lead margin, or a brand without a source declaration and traceability record. If the format needs a clear solution, no carbonate grade fits; calcium citrate or calcium lactate is the practical route, and the citrate page and the lactate page set out the mass and solubility consequences. A source switch is a change control, not a purchasing choice. Re-run the lead calculation, the finished-product contaminant check and the label review, then reissue the specification. The product hub carries the catalog figures; the grade page places the three sources in the wider range; the COA page shows how the source and the lead are reported; the quality page describes the release file. ## Five questions before a shell lot is approved - Is the material ground shell or calcined shell, and is it still calcium carbonate? - Which species, origin and processor does the source declaration name? - What are the lead and cadmium results, with the limit of quantification, for this lot? - What is the acid-insoluble matter, and what does the cleaning record say about grit and organic residue? - Will you support the label review with the source record, the COA and a joint re-test on the retained sample? Five direct answers, tied to one lot code, are what a shell claim rests on. A calcium percentage and the word “oyster” on the pack are not. ### 03 Calcium carbonate stability: moisture, acid and the pack URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-carbonate/stability/ Reviewed: 2026-11-19 Calcium carbonate is a stable, non-hygroscopic salt: a dry powder in a sealed pack keeps its assay, and the failure modes are moisture pick-up, caking and reaction with acid rather than decomposition. In water it is practically insoluble, so a suspension is a physical system that settles; in an acidic matrix it dissolves and releases carbon dioxide. Shelf life is assigned from data for the pack and the matrix, not from the salt alone. In one lineDry and sealed, calcium carbonate is one of the least demanding mineral salts; moisture, acid and the pack decide what happens next. ## The dry powder: moisture, caking and temperature The catalog sets loss on drying at ≤1.0%. That figure is surface moisture, not water of crystallisation, because calcium carbonate is not a hydrate. The oven test removes free water without decomposing the carbonate; calcination needs a kiln, well above any drying or tableting temperature. The low water content is why the salt is easy to keep, and why a rising loss on drying is a signal about the pack rather than about the molecule. The powder is not hygroscopic in the way calcium chloride or magnesium chloride is, but a fine precipitated grade can still cake. Humidity, storage pressure and the surface area of the particles act together: a pallet of 25 kg drums in a humid store can produce lumps at the bottom even when the certificate is well inside its moisture limit. Keep the pack sealed, keep the store dry, and let a cold drum equilibrate before opening so that condensation does not form on the powder. Acidic vapours are a specific risk. A store that also holds acetic acid, cleaning agents or acidic flavour concentrates can attack the surface of the powder and generate gas inside the container. Keep the carbonate away from those materials, and do not store an opened pouch next to an acid drum. ## The suspension and the acid reaction Calcium carbonate is practically insoluble in water. A suspension is therefore a physical system: the particles settle, the supernatant is a saturated solution, and the saturated solution is mildly alkaline. The stability questions for a suspension are sedimentation, resuspension, viscosity and microbial control, not hydrolysis of the salt. A thickener and a documented resuspension test belong in the formula work. In acid the chemistry changes. The carbonate reacts, dissolves and releases carbon dioxide, and the rate depends on the particle size, the crystal form, the acid strength and the temperature. A clear acidic drink cannot hold the carbonate: the acid is consumed, the pH rises and the gas appears. In an effervescent tablet that reaction is the function; in a fruit-flavoured stick it is a formulation problem. The reaction also consumes acid. A carbonate dose added to an acidic matrix will neutralise part of the acidulant, which changes the taste and the pH of the finished product. Measure the acid neutralising capacity in the matrix, not only the pH of a water slurry. ## What drives change during storage Factors that move calcium carbonate during storage | Factor | What it does | Control | Moisture | Raises loss on drying; caking and lumping | Sealed pack; dry store; liner intact | Acid and pH | Dissolves the salt; releases carbon dioxide | Keep acid separate; validate the matrix pH | Heat | Dries the powder; no decomposition at process temperatures | Normal warehouse and process conditions | Light | Not a driver for the salt itself | Protect light-sensitive formula ingredients | Particle size | Sets reaction rate and settling behaviour | Fix the mesh and the crystal form | Pack integrity | Liner or seal failure admits moisture and air | Inspect pouch and drum liner; record opening The table is shorter than it would be for an organic ingredient because the salt has no chromophore and no hydrolysable bond. That does not make it inert in a formula. The matrix can supply the acid, the water and the heat that the powder alone does not have. ## A stability protocol for the ingredient A useful protocol states the pack, the storage condition, the time points and the tests. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% relative humidity cover the warehouse; accelerated storage at 40 °C/75% relative humidity stresses the pack. A light-exposure arm is not needed for the carbonate itself, but it is needed when the formula contains a colour, a flavour or another ingredient that is light-sensitive. Test assay, calcium, loss on drying, acid-insoluble matter, appearance and microbiology at each point. For a suspension, add sedimentation volume, resuspension, pH and viscosity. For an effervescent tablet, add gas loss, tablet hardness, disintegration and package pressure. The report should show the individual results and identify the pack and the lot family, not only a pass statement. Ask for the stability summary for the pack you will buy. A 1 kg pouch and a 25 kg drum have different headspace, different opening histories and different moisture loads, so the data belongs to the pack rather than to the product name. ## The finished formula changes the answer A tablet or a capsule has low water activity, but the excipients can still transfer moisture and the fill can still pick up water from the air during a long run. Check loss on drying at release and after storage, and check the appearance and the hardness of the fill. Granulation adds water and heat; dry the granule to the same moisture limit before compression. An effervescent tablet is a reaction waiting for water. The acid and the carbonate must be kept apart by the manufacturing process and the pack, and the tablet must be protected from humidity. A stick pack depends on the seal and the foil; a pinhole is a failure, and the strip should be inspected, not only the powder. A suspension combines settling with microbial risk, and the preservative system is part of the stability question. Overage is a label and process decision, not a repair for a pack that lets moisture in. The carbonate is stable enough that an overage is rarely justified by the salt's own degradation; the reason to add one, if any, belongs to the finished-product study. ## How the shelf life is set We do not publish a single shelf-life number for calcium carbonate, because the pack and the storage condition set it. The assigned retest period belongs on the specification and is supported by the stability file for that pack. A number without a pack, a condition and a test panel is not a shelf life; it is a claim. After the retest period, re-assay the retained sample before extending use. Do not extend by assumption, and do not carry a bulk figure across to a repacked container. The product hub lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the methods index describes the tests; the quality page describes the release workflow. ### 04 Calcium carbonate MOQ, packs and lead time URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-carbonate/moq/ Reviewed: 2026-11-19 The MOQ for calcium carbonate is 1 kg, supplied in a 1 kg foil pouch; the standard bulk pack is a 25 kg fiber drum and the lead time is 1–7 days. A firm quotation needs six pieces of information: source and grade, specification, quantity and pack, destination and Incoterm, documents, and the intended use. The minimum is a pack and traceability decision, not a volume threshold. In one lineOne kilogram is the smallest pack that can be sampled, tested and traced as a lot; the 25 kg drum is a scale decision made after the trial. ## Why the minimum is 1 kg A 1 kg pack covers a bench-scale trial, a retained sample and an independent identity or contaminant test. It is small enough to ship by air as a parcel, which matters when a formulator needs material before the production plan is fixed. The pack carries a lot code and a certificate, so the material can be traced back to the batch that made it. Below 1 kg the material is usually split from a larger lot and repacked. That adds handling, loses the original pack identity and makes traceability harder without changing the chemistry. The 25 kg drum is the bulk unit: it reduces handling per kilogram, but it commits inventory and a longer storage period. Choose the drum after the trial has confirmed the grade, not before. ## Packs and formats Standard calcium carbonate packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Particle profile changes; new specification line The catalog form is a 40 mesh powder: ≥95% through 40 mesh. Granulation is a different specification, not a packing choice. If the capsule filler or the tablet press needs a freer-flowing powder, say so before the quotation, because the change moves the particle-size line and may move the lead time. ## Lead time and dispatch The standard pack is quoted at 1–7 days from order confirmation. That window covers picking, document preparation and dispatch; it does not include the shipping transit, customs clearance or the customer's own quality release. A granulated batch or a non-standard pack adds time, and the quotation should state it separately. Ask for the dispatch date, not only the lead time. A 25 kg drum may travel on a pallet and a 1 kg pouch may travel as a parcel; the Incoterm decides who books the freight and who clears the entry. The documents should travel with the lot, not after it. ## What a quotation needs Six items make a quotation firm enough to compare: - Product and source. Calcium carbonate, CAS 471-34-1, with the source written out: precipitated, ground or oyster shell. - Specification. Assay, calcium, loss on drying, acid-insoluble matter, lead limit, particle size and crystal form if claimed. - Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated variant. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, specification, SDS, source declaration and any market-specific statement the importer needs. - Intended use and market. Supplement, food, or another use, and the market where it will be sold. A quotation without the source and the market is incomplete. The same assay can come from three supply chains, and the documents that support a source claim are part of the offer. We do not publish commercial terms on this page; they are stated on the quotation. ## The sample is a lot, not a demonstration The 1 kg pack is the qualification sample. Test assay and calcium, loss on drying, acid-insoluble matter, lead and the heavy-metal panel, microbiology and particle size before scaling, and keep a retained sample from the same pack. For a shell grade, add the source declaration and the lead result with its limit of quantification. The lot code on the sample, the COA and the quotation should match. If the project needs a smaller quantity for a bench trial, discuss it before ordering. A split from a bulk lot is a repack with its own traceability, not the catalog pack, and it should be documented as such. Do not assume that a bench sample and the production drum will come from the same lot. ## Terms to settle before the first order The quotation sets out the commercial terms, the Incoterm, the pack, the lead time and the documents. The quality terms belong beside them: the specification revision, the COA per lot, the retained sample, the retest period and the change-control route. A quality agreement is worth having before the first production order, not after the first dispute. A change of source is the term that needs the most care. Moving from precipitated to ground, or from ground to oyster shell, is a different specification, a different impurity profile and possibly a different label claim. It should be handled as a change control with a new COA and a new release, not as a purchasing substitution. Returns and replacements follow the quotation and the quality agreement. A lot that fails the agreed specification should be handled through the retained sample and a joint re-test, not through a photograph of the powder. Ask who pays for the referee test, and which laboratory is acceptable to both sides. The product hub carries the catalog specification; the COA page lists the release tests; the compliance page covers the market files; the MOQ glossary entry defines the term; the logistics page covers shipping and documents. ### 05 The regulatory file for calcium carbonate URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-carbonate/compliance/ Reviewed: 2026-11-19 Calcium carbonate is a mineral salt with a long food and supplement history, but the file still has to show the exact source, the specification, the lot results, the contaminant margin at the finished dose and the label wording for the destination. In the EU the food-additive route and the food-supplement route are separate, and in the US the dietary-supplement route is separate again. The buyer's regulatory team confirms the route; this page lists what the file should contain. In one lineCalcium carbonate has several regulatory routes, and the file has to show which one the destination uses, what the dose contributes and what the label may say. ## What the file contains A complete file answers four practical questions. What is the material, and which specification version is being bought? Which lot is being released, and what does its certificate report? Which route, limits and label rules apply to the finished product? And what changes if the source, the process or the pack changes? The certificate answers the lot question, the technical data sheet answers the specification question, and the safety data sheet answers the handling question. None of them answers the route question on its own. The file should also carry the source declaration, the allergen and GMO statements, the origin record and any customer-specific declaration. Where a statement is not available for the lot, the gap should be named before the order, not discovered at the port. ## European Union The EU file is built from the specification, the contaminant results and the label. General food law (Regulation (EC) No 178/2002) sits under the product-specific rules; food supplements are governed by Directive 2002/46/EC, labelling by Regulation (EU) No 1169/2011 and contaminants by Regulation (EU) 2023/915. Where the carbonate is used as a food additive rather than a supplement ingredient, the additive route under Regulation (EC) No 1333/2008 applies, and E 170 is the additive identity. For a supplement, the permitted-source list in Annex II to Directive 2002/46/EC is the usual reference for a calcium salt. The buyer's regulatory team confirms that the entry covers the material, the member state and the current consolidated text as of this review. The same team confirms whether the finished product is a supplement or a food, because the two routes carry different labels and different limits. ## United States The US file is built around the exact dietary ingredient and its intended use. The dietary-supplement route is separate from the food-ingredient and food-additive routes, and the buyer's team confirms which basis covers the finished product. The supplier should be able to name the material, the source and the specification it ships against, and point to the lot certificate that supports it. The label review is separate from the certificate. A Supplement Facts panel declares elemental calcium in milligrams and as a percentage of the Daily Value, and the ingredient list names the calcium source. The Daily Value for calcium is 1,300 mg for adults and children aged four years and older, as of this review. The brand's regulatory reviewer checks the panel, the source name and any claim against the current text. ## Contaminants and the finished dose The contaminant panel is a finished-product calculation, not only a drum result. The table below is the usual EU supplement reference for the elements that matter most in a mineral salt; the current destination text and the daily dose decide the final limit. Contaminant references to confirm for the finished product | Parameter | Usual supplement reference | What the file should show | Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method, limit and the finished-product calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception that applies | Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result and method | Arsenic (As) | Customer or market limit | The agreed limit and the method, stated on the certificate The arithmetic is where a calcium carbonate file differs from a low-dose ingredient. A 1.5 g tablet that carries 1.25 g of carbonate is about 83% carbonate by mass, so a raw material at the 3.0 mg/kg limit contributes about 2.5 mg/kg to the tablet before any excipient or process contribution. That leaves very little headroom. The raw-material lead limit should be set below the finished-product limit, from the dose and the tablet mass, not copied from it. The same logic applies to a powder that is dosed by the gram. A 2 g daily dose of carbonate at 3.0 mg/kg delivers 6 µg of lead per day, and the finished-product limit has to be met at that dose. Ask for the limit of quantification with every lead result; a pass at 2.9 mg/kg and a pass at 0.2 mg/kg are not the same risk. ## Label and claims The label names the material, the quantity and the source in the form the destination requires. In the EU, calcium is declared in milligrams and as a percentage of the 800 mg reference intake; the source is named in the ingredient list. In the US, the Supplement Facts panel declares elemental calcium against the Daily Value and the ingredient list names the salt. Claims are a separate review. The EU nutrition and health claims Regulation (EC) No 1924/2006 governs the wording and the conditions of use; in the US, structure-function claims sit under the dietary-supplement framework and carry their own disclaimer rules. The brand's reviewer confirms that the wording is allowed for the product, the source and the market. This page makes no claim, and a certificate does not approve one. Source claims need evidence. “Oyster shell” on the front of a pack is a statement about the origin of the carbonate, and it must match the ingredient list and the lot record. “Lead-free” is not a defensible absolute; a result below the limit of quantification is a statement about the method, not a guarantee of zero. “Purified” and “natural” are marketing words that need a definition the file can support. ## Documents the file needs - Specification with version, source, crystal form and release limits. - COA for the lot, with methods, results, limits and the lead limit of quantification. - Technical data sheet, safety data sheet and the source declaration. - Heavy-metal and microbiology results, with the finished-dose calculation. - Particle-size and bulk-density data where the powder is to be filled. - Allergen, GMO, origin, irradiation and residual-solvent statements as applicable. - Change-control statement for source, process and pack. ## Checklist before the first order - The source is named and the specification version is fixed. - The COA matches the lot, the pack and the retained sample. - The lead result carries a limit of quantification and a finished-dose margin. - The destination route and the label wording have been reviewed by the buyer's team. - The source claim on the pack is supported by the lot record. - Source, process and pack are under change control. The product page carries the catalog specification; the COA page explains the lot certificate; the identity page covers the analytical evidence; the source comparison covers the lead and label consequences. The quality page describes the release file, and the EU and US regulatory notes provide the framework references. ### 06 How to prove a lot is calcium carbonate URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-carbonate/identity/ Reviewed: 2026-11-19 A calcium carbonate lot is proved by four agreeing measurements: the document names the source and the formula, the EDTA titration gives about 40% calcium and ≥99.0% CaCO₃, the acid reaction releases carbon dioxide in the proportion the formula predicts, and X-ray diffraction shows a carbonate crystal form rather than an oxide or a sulfate. The calcium figure alone cannot separate carbonate from oxide, hydroxide or a blend. The carbon dioxide and the acid-insoluble matter are what close the gap. In one lineCalcium proves the element; the carbon dioxide released by acid and the crystal form shown by X-ray diffraction are what prove the powder is carbonate. ## The four identity layers A certificate can name the right material and still fail to prove it. The layers below are separate questions, and each one needs its own evidence. A supplier who answers only the first has described the paperwork, not the powder. Four layers of calcium carbonate identity | Layer | Question | Test | What it proves | Document | Is the source and the formula named? | Name, CAS number, source declaration | Paperwork only | Titration | Is the calcium figure right? | Complexometric titration with EDTA | The element, not the salt | Acid reaction | Is the anion carbonate? | Carbon dioxide by acid gravimetry | The carbonate anion | Solid state | Which crystal form is present? | X-ray diffraction | Calcite, aragonite or vaterite Acid-insoluble matter belongs beside these as a negative check: it measures what the acid did not dissolve, and a high residue points to silicate grit, a different mineral or a dirty source. It is not an identity test, but it limits how much of the powder can be something else. ## The calcium-to-carbon dioxide ratio Pure calcium carbonate is 40.04% calcium and 43.97% carbon dioxide by mass, a molar ratio of one calcium to one carbonate. The titration measures the calcium; acid gravimetry measures the carbon dioxide released when the powder dissolves. If both figures land on the formula, the mass balance is consistent with CaCO₃. If the calcium is high and the carbon dioxide is low, part of the calcium is present as oxide or hydroxide. If the carbon dioxide is high relative to the calcium, a magnesium carbonate or another carbonate salt is the likely explanation. The arithmetic is simple enough to run on a certificate. One gram of pure carbonate releases about 0.44 g of carbon dioxide. A lot that reports 40.0% calcium and 36% carbon dioxide has a calcium-to-carbon dioxide mole ratio near 1.2, which is not calcium carbonate; the missing carbonate has to be explained before the lot is accepted. A certificate that reports only the calcium figure has left that check out. The titration itself needs a method note. EDTA at pH 12–13 precipitates magnesium as the hydroxide and titrates calcium selectively; at pH 10 the same titrant measures calcium plus magnesium. A certificate that says “calcium by EDTA” without the pH and the indicator has not said which figure it reports. Ask for the method, especially when a magnesium carbonate is a plausible contaminant. ## X-ray diffraction and the crystal form Calcium carbonate crystallises as calcite, aragonite or vaterite. Calcite is the common form in mined limestone and in many precipitated grades; aragonite is denser and dissolves faster; vaterite is metastable and can convert to calcite in the presence of water. The three give different diffraction patterns, so X-ray diffraction can say which form is present and whether a second crystalline phase is visible. The method answers a solid-state question, not a purity question. It can show that a lot is calcite rather than aragonite, or that an oxide or a sulfate phase is present above the detection limit. It cannot show that the carbonate came from an oyster, and it cannot quantify an amorphous fraction. Ask for the reference pattern, the scan range and the detection limit before reading a “match” statement. Crystal form matters commercially when the powder is sold on a process claim or when the acid reaction rate is part of the specification. It also matters in a tablet: aragonite and calcite differ in density and in dissolution behaviour, so a form change can move the fill weight and the taste even when the assay does not move. ## What substitution looks like Substitutions and the signals that expose them | Substitute | What it does | Signal | Test | Calcium oxide or hydroxide | Raises calcium; no carbonate; alkaline | High calcium, low carbon dioxide, fast acid reaction | Acid gravimetry, pH, XRD | Calcium sulfate | Lowers calcium; no effervescence | No carbon dioxide; sulfate present | Acid gravimetry, sulfate test, XRD | Calcium phosphate | Calcium near the right figure; no carbonate | No carbon dioxide; phosphate present | Acid gravimetry, phosphate test | Magnesium carbonate | Adds carbon dioxide; adds magnesium | Calcium low against carbon dioxide; magnesium detected | Selective EDTA, ICP-OES, XRD | Ground limestone in a precipitated lot | Moves the residue and the particle distribution | Acid-insoluble matter high; broad particle curve | Acid-insoluble, particle size | Mined carbonate sold as shell | No chemical difference in the assay | Source record does not match the claim | Traceability documents, not XRD Colour is the weakest signal. All three sources can be white, and a shell grade can carry a faint tone that a mined grade does not. The stronger signals are the carbon dioxide figure, the acid-insoluble residue, the crystal form and the lead result. A certificate that reports appearance, calcium and assay but not carbon dioxide has left the most likely substitution untested. ## How to write identity into the specification - “Calcium carbonate, CAS 471-34-1, CaCO₃; source declared as precipitated, ground or oyster shell.” - “Assay ≥99.0% as CaCO₃ by complexometric titration; calcium 39.0–41.0%.” - “Identification by infrared and titration; carbon dioxide by acid gravimetry if agreed.” - “Loss on drying ≤1.0%; acid-insoluble matter ≤0.2%.” - “Crystal form by X-ray diffraction when calcite or aragonite is claimed.” - “No calcium oxide, calcium hydroxide, magnesium carbonate or other calcium salt added.” - “Source and crystal form under change control; lot code on the pack and the certificate.” The negative clause is as important as the positive ones. A carbonate specification that does not exclude the oxide and the hydroxide leaves a partially calcined lot inside the calcium window, and the clause gives the laboratory a line to test against. ## Five questions for the supplier - Which source is this lot, and what does the source declaration say? - What pH and indicator were used for the EDTA titration, and was magnesium masked? - What is the carbon dioxide result, and how was it measured? - Which crystal form does X-ray diffraction show, and what reference pattern was used? - What is the lead result with its limit of quantification, and will you accept a joint re-test on the retained sample? Five direct answers amount to an identity file; a calcium percentage does not. The product hub carries the catalog specification; the COA page shows where each figure sits on the certificate; the grade page compares the sources; the source comparison covers the lead and label consequences; the methods index explains the tests. ### 01 What the COA for calcium gluconate actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-gluconate/coa/ Reviewed: 2026-11-19 A calcium gluconate certificate has to settle three things at once: how much calcium the lot contains, how much water it carries, and whether the anion is gluconate. The calcium titration answers the first, Karl Fischer answers the second, and IR plus a gluconate-specific assay answer the third. The figures below are catalogue limits, not results for a particular drum. In one lineA calcium titration near 9% fits calcium gluconate, but only the water figure, the IR identity and the anion check show that the powder is the gluconate. ## Reading the certificate line by line Each row should be readable as a small experiment: the parameter, the method that produced the number, and the limit the lot was released against. “Conforms” is not a measurement. It is a conclusion, and the reader needs the evidence behind it. The calcium and assay rows come from one titration. The analyst measures calcium, then expresses the same result as calcium gluconate: 11.19 is the factor for the monohydrate on an as-is basis, and 10.74 is the factor on a dried basis. The factor belongs to the formula. The basis belongs on the certificate. What a calcium gluconate certificate reports | Parameter | Method | Limit | Appearance | Visual | White crystalline powder | Identification | IR and titration | Conforms to the reference | Assay, as calcium gluconate | Complexometric titration | 98.0–102.0% | Calcium | Complexometric titration | 8.5–9.5% | Water | Karl Fischer | 3.0–6.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh The calcium row is the one the formulator uses at the balance; the assay row is the one the purchaser compares between suppliers. A certificate that shows only the assay has left out the element the label declares. ## Water, the monohydrate and the assay basis The crystal carries one water molecule for every calcium gluconate unit. That water is 18.015 ÷ 448.39 = 4.0% of the monohydrate at theory, which is why the catalogue range of 3.0–6.0% sits around it. Water is weighed with the powder but is not part of the gluconate, so the same lot reads differently on an as-is and a dried basis. Suppose a lot assays 100.0% on the dried basis and carries 4.0% water. In 100 g of powder there are 96.0 g of dry matter and 4.0 g of water. The dry matter is calcium gluconate, 9.31% of which is calcium, so the calcium present is 8.94 g. The as-is calcium figure is therefore 8.94%, and the as-is assay is 96.0%. Neither figure is wrong; they answer different questions. The pair also works as a consistency check. Water at the top of the range pulls the as-is calcium down, while the dried-basis assay can stay in the middle. Calcium high with assay low means the two numbers are not describing the same powder. Ask for the calculation, not just the two percentages. ## The limit and the measured result A release limit is the boundary written into the specification. A result is what the laboratory found in the sample. They belong in separate columns, with the method named beside them. When the result column simply repeats the specification window, the reader has been given the gate again, not a measurement. Limit, result and the evidence behind each row | Parameter | Specification | Expected result entry | Assay | 98.0–102.0% calcium gluconate | A percentage, the basis, and the titration method | Calcium | 8.5–9.5% | A percentage on the stated basis | Water | 3.0–6.0% | A percentage by Karl Fischer | Heavy metals | Each element separately | A mg/kg figure for lead, arsenic, cadmium and mercury | Microbiology | Counts and absence | The plate count plus the absence statement | Particle size | ≥95% through 40 mesh | The measured passing fraction A single heavy-metal total hides which element is present. A microbiology row that says “within limits” hides the count. For both, the number is the evidence, and the limit is only the frame around it. ## Where batches differ The water figure moves with crystallisation and drying. The sieve result moves with milling, independently of the chemistry. Colour follows crystal size: a fine powder scatters light differently from a coarse one, and both can be the same salt. A darker or duller shade within the white-to-off-white range is not a form change on its own. A water result at 3.0% sits near the anhydrous end, while 6.0% carries more water and a lower as-is calcium figure. Either can meet the dried-basis assay. A slow climb across lots is more informative than one reading near an edge: it points to a drying step that has been shortened, or to a pack that is picking up moisture in storage. Match the lot code on the certificate to the pouch, the drum and the retained sample. A specification without a revision number cannot be tied to the certificate, and a certificate without a lot code cannot be tied to the pack. ## Bringing in an outside laboratory Independent testing earns its cost when a source is new, a market is new, a form is disputed, or two laboratories disagree. The panel should be chosen to answer the open question, not to repeat the supplier's certificate. IR, complexometric calcium, Karl Fischer water, a gluconate-specific assay, ICP-MS and microbiology cover the usual gaps. Add XRD when the hydrate is disputed, and a reducing-substances test when the route is fermentation-based. Ask each laboratory for its detection limit. A “not detected” entry with no limit describes the method's reach, not the sample's purity. Keep the chain of custody short and documented. The referee should receive the retained sample, the supplier's certificate and the agreed specification, and should be asked for the tests that separate gluconate from other calcium salts. Repeating the same calcium titration does not settle an anion question. ## Two quotations, six lines Compare the hydrate and CAS number, the assay with its basis, the calcium and water results, the identity evidence, the contaminant and microbiology panel, and the pack with its lot code. Quotations that agree on calcium but differ on hydrate or basis are not offering the same powder. Then check traceability: who made the lot, which process route was used, and which drying and milling steps were applied. The catalogue specification is on the calcium gluconate product page. The analytical separation of gluconate from other salts is on the identity page; the hydrate comparison is on the grades page; the titration background is in the methods library; the release sequence is on the quality page. ### 02 Calcium gluconate grades: monohydrate, anhydrous and mesh URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-gluconate/grades/ Reviewed: 2026-11-19 Calcium gluconate is supplied as the monohydrate, as the anhydrous salt and in several particle sizes. The monohydrate is the standard supplement grade: 98.0–102.0% assay, 8.5–9.5% calcium and 3.0–6.0% water by Karl Fischer. The anhydrous salt carries about 9.3% calcium and much less water. The choice changes the calcium figure per gram, the fill weight and the mass on the balance. In one lineThe hydrate state is the grade decision: the monohydrate carries about 4% water, so its calcium figure per gram is lower than the anhydrous salt's. ## Why calcium gluconate comes in two hydrates Calcium gluconate crystallises from water as the monohydrate. The water is held in the crystal lattice, not added as a carrier, and it leaves on drying. The monohydrate is the usual commercial form because the crystal is stable, free-flowing and defined by a water range. The anhydrous salt is made by drying that crystal further; it carries more calcium per gram and is chosen where added water is a problem. Both are called calcium gluconate on a label, which is why the specification has to name the hydrate and the CAS number. The monohydrate is CAS 18016-24-5; the anhydrous salt is CAS 299-28-5. A purchase order that names only “calcium gluconate” has left the calcium figure, the water limit and the fill weight open. ## Monohydrate and anhydrous compared Calcium gluconate monohydrate and anhydrous salt | Property | Monohydrate | Anhydrous | CAS number | 18016-24-5 | 299-28-5 | Formula | C12H22CaO14·H2O | C12H22CaO14 | Molecular weight | 448.39 | 430.37 | Calcium, theoretical | 8.94% | 9.31% | Water by Karl Fischer | 3.0–6.0% | Low; anhydrous grade | Appearance | White crystalline powder | White powder | Water solubility | About 3 g per 100 mL at 20 °C | Soluble in water | Typical use | Tablets, capsules, sticks | Dry blends and water-sensitive formulas The calcium difference is about 4% relative, not a rounding error. A formula that switches from the monohydrate to the anhydrous salt without changing the fill delivers more calcium per tablet and a different label figure. The switch belongs in change control, with a new assay and a new fill calculation. ## Solubility, taste and particle size Calcium gluconate dissolves to about 3 g per 100 mL of water at 20 °C, and much more readily in hot water. The solution is close to neutral, with a pH around 6–8, and the taste is mild. That makes the salt usable in a drink mix as well as in a tablet, although the mass needed for a meaningful calcium dose is large. The catalogue form is a 40 mesh powder: at least 95% passes a 40 mesh sieve. Granulation is available on request and changes the flow, the dust and the bulk density. A granulated grade can feed a tablet press more evenly, but it is a different particle-size specification and should be qualified as such. The crystal form also affects the tablet: a fine powder compacts differently from a granule. The powder is not strongly hygroscopic in the sealed pack, but it is not a desiccant either. A broken seal, a humid dose room or a long hold in an open container will move the water figure and can cause caking. The pack and the storage condition are part of the grade decision, not an afterthought. ## From calcium claim to dosage form The label claim is elemental calcium, not calcium gluconate. At 8.94% calcium, a 500 mg calcium claim needs 500 ÷ 0.0894 = 5.59 g of the monohydrate. A 1,000 mg calcium gluconate tablet delivers only 89 mg of calcium. That arithmetic drives the tablet size and the number of tablets per dose, and it is the reason the gluconate is often used in sticks or in multi-tablet regimens. The same mass is easier to handle in a stick pack than in a capsule. A stick can carry 5–6 g of powder and dissolve in water; a capsule carries about a gram, so a 500 mg calcium dose would need several capsules. A tablet can be made large enough, but the swallowability and the excipient load become part of the design. The gluconate versus lactate comparison works through the tablet arithmetic in detail. The hydrate state also moves the dose. The anhydrous salt at 9.31% calcium needs 5.37 g for the same 500 mg claim, about 4% less mass. That is a small change in the weigh-up but a real change in the label calculation and the tablet weight. ## Clauses for the specification - “Calcium gluconate monohydrate, CAS 18016-24-5, C12H22CaO14·H2O.” - “Assay 98.0–102.0% as calcium gluconate by complexometric titration; state the basis.” - “Calcium 8.5–9.5%; water 3.0–6.0% by Karl Fischer.” - “Identification by IR and titration; report the gluconate-specific assay where the form is disputed.” - “Particle size: at least 95% through 40 mesh; contaminants and microbiology per the table above.” - “Destination market and finished-product calcium claim confirmed before the order.” We supply the monohydrate. The anhydrous salt is a different purchase with a different calcium figure; a swap needs written change control and a new fill calculation. ## When another salt is the better fit If the tablet has to stay small, calcium gluconate is the wrong starting point. Calcium carbonate carries about 40% calcium, calcium citrate about 21% and calcium lactate about 13%; each delivers more calcium per gram and needs less fill. The gluconate is chosen for its mild taste, its neutral solution and its handling, not for calcium density. If the formula is water-sensitive, the anhydrous salt is the better gluconate grade; if the formula is a clear drink, the lactate may dissolve more easily. If the label has to name a specific salt, the choice is fixed before the formula is written. The product hub carries the catalogue specification; the calcium lactate page sets out the alternative; the calcium citrate page covers the intermediate calcium figure; the COA page shows how the hydrate is reported. ### 02.1 Calcium gluconate vs lactate: elemental calcium and tablet size URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-gluconate/grades/calcium-gluconate-vs-lactate/ Reviewed: 2026-11-19 Calcium gluconate monohydrate carries 8.94% elemental calcium; calcium lactate pentahydrate carries 13.0%. One molecule of each salt carries one calcium ion, but the gluconate molecule weighs 448.39 g per mole against 308.30 g for the lactate, so the same calcium claim needs about 1.45 times the gluconate mass. That difference is what makes the gluconate tablet larger, or splits the dose across more tablets. In one lineGluconate carries about 9% calcium and lactate about 13%, so the same label claim needs roughly 1.5 times the gluconate mass and a larger tablet. ## Two calcium figures, one calcium ion The calcium figure is the mass of elemental calcium in 100 g of the salt as weighed. It is fixed by the formula and the hydrate, not by the assay. The monohydrate has one water molecule in the crystal, which adds mass without adding calcium; the pentahydrate has five. The counter-ion adds the rest. Calcium gluconate monohydrate and calcium lactate pentahydrate | Property | Calcium gluconate monohydrate | Calcium lactate pentahydrate | CAS number | 18016-24-5 | 5743-47-5 | Formula | C12H22CaO14·H2O | C6H10CaO6·5H2O | Molecular weight | 448.39 | 308.30 | Calcium, theoretical | 8.94% | 13.0% | Water by Karl Fischer | 3.0–6.0% | 22.0–27.0% | Water solubility at 20 °C | About 3 g per 100 mL | About 8–9 g per 100 mL The water figures explain part of the gap. The lactate pentahydrate carries much more water, yet it still delivers more calcium per gram, because its organic anion is much smaller. Comparing “calcium content” without checking the hydrate can pair a monohydrate with an anhydrous lactate, which is a different comparison. ## What a calcium claim needs on the balance The label claim is elemental calcium. The weigh-up is the salt. Divide the claim by the calcium figure to get the salt mass, then add the overage and the excipients the formula needs. The table below uses the theoretical figures; a batch certificate will move the third digit, so use the measured calcium for the final calculation. Salt mass needed for a calcium claim | Calcium claim | Calcium gluconate monohydrate | Calcium lactate pentahydrate | 250 mg | 2.80 g | 1.92 g | 500 mg | 5.59 g | 3.85 g | 1,000 mg | 11.19 g | 7.69 g A 500 mg claim is 62.5% of the EU reference intake of 800 mg and 38% of the US Daily Value of 1,300 mg. The salt mass is not the claim, and a label that says “500 mg calcium” beside 5.59 g of gluconate in the ingredient list is not inconsistent. A label that calls 5.59 g “500 mg calcium gluconate” is wrong by a factor of eleven. ## The tablet size follows the salt mass A swallowable tablet is usually 500–1,500 mg. At 1,000 mg, a calcium gluconate tablet delivers 89 mg of calcium; the same weight of lactate delivers 130 mg. To reach a 500 mg calcium claim, a formulator needs six 1,000 mg gluconate tablets or four 1,000 mg lactate tablets. At 1,500 mg, the count is four gluconate tablets or three lactate tablets. The gluconate tablet is not a little bigger; it is a different dosage regimen. The mass also changes the excipient load. A 5.59 g dose needs a binder, a disintegrant, a lubricant and a coating at a few percent each, so the tablet weight climbs further. A 5.6 g single tablet is outside the normal swallowable range; the practical answers are multiple tablets, a stick pack or a smaller calcium claim per unit. The lactate reduces the count but does not remove the problem: 3.85 g is still three or four tablets. A capsule is worse. A size 000 capsule holds about a gram of powder, so a 500 mg calcium dose would need five or six capsules of gluconate and four of lactate. A stick pack or a drink mix avoids the capsule limit because it can carry the full salt mass. That is why the gluconate is often seen in sticks and in multi-tablet packs rather than in a single small capsule. ## Solubility, taste and the drink Calcium gluconate dissolves to about 3 g per 100 mL at 20 °C; calcium lactate dissolves to about 8–9 g per 100 mL. For a 500 mg calcium dose, the gluconate needs close to 200 mL of water at room temperature, while the lactate dissolves in about 50 mL. Both figures are approximate and both improve with warming, but the difference is large enough to decide a stick-pack format. The gluconate solution is close to neutral and has a mild taste. The lactate solution is also mild but can read slightly saline at higher concentrations. Neither is a flavouring; the flavour system still has to cover the mineral note. In a chewable or a gummy, the mass and the taste matter more than the solubility, and the gluconate's low calcium density makes a large piece. Solubility is not the same as dissolution rate. A 40 mesh powder wets and dissolves faster than a granule, and a granulated grade may be chosen for flow rather than for speed. ## The label arithmetic The nutrition panel declares elemental calcium; the ingredient list names the salt. A 1,000 mg calcium gluconate tablet delivers 89 mg of calcium, which is 11% of the EU reference intake and 7% of the US Daily Value. A 1,000 mg calcium lactate tablet delivers 130 mg, which is 16% of the EU reference intake and 10% of the Daily Value. Two mistakes are common. The first is to write the salt weight into the calcium column. The second is to switch the salt without recalculating the panel and the tablet weight. A change from gluconate to lactate at the same salt mass raises the calcium per tablet by 45%; a change at the same calcium claim lowers the salt mass by 31%. Either way, the panel, the ingredient list and the batch record have to move together. The label also has to match the market file. The form named in the ingredient list should be the form the specification and the certificate describe, and the calcium claim should be supportable from the measured calcium, not from the theoretical figure alone. ## When to choose which Choose the gluconate when the label names it, when the taste and the neutral solution matter, and when the dose can be carried in a stick or in multiple tablets. It is the milder salt in solution and the easier one to blend into a neutral drink. Choose the lactate when the tablet or capsule count has to come down, when the drink volume is small, or when a higher calcium figure per gram is the deciding constraint. Neither choice is a drop-in for the other. The calcium claim, the tablet weight, the ingredient list and the dissolution test all change. If the project needs the highest calcium per gram, carbonate and citrate are the next comparisons; the calcium citrate page covers the middle of that range. The calcium gluconate hub carries the specification; the calcium lactate page carries the alternative; the grades page covers the hydrate choice; the titration note explains the calcium assay; the quality page covers release. ### 03 Calcium gluconate is stable dry; water and the matrix decide the rest URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-gluconate/stability/ Reviewed: 2026-11-19 A sealed pouch of calcium gluconate monohydrate is a low-risk solid: it holds its water figure and stays free-flowing for the retest period assigned to that pack. Once the powder is dissolved, the risks change. A solution needs a preservative or a sterile fill, and its pH and anion balance decide whether the calcium stays in solution. The pack, the matrix and the time belong in the same sentence. In one lineThe monohydrate keeps in a sealed pack; in solution, microbial growth, pH and calcium precipitation set the hold time. ## The solid: a water window, not a moisture allowance The 3.0–6.0% Karl Fischer range is the release window for the monohydrate, built around the 4.0% water the crystal carries at theory. It is not an allowance for moisture picked up in storage. An opened pouch exchanges water with the room, and the figure moves in whichever direction the room is drier or wetter than the powder. Calcium gluconate does not pull water from the air as aggressively as a deliquescent salt, but it can cake under a humid hold or a heavy pallet. Caking changes the flow and the weigh-up even when the assay is unchanged. The foil pouch, the drum liner and the humidity of the dose room are the practical controls. A clear jar with a screw cap is not a substitute for a sealed barrier pack. Ambient warehouse heat is tolerable for the sealed pack. A hot loading bay or a roof space is not, because heat accelerates moisture exchange and can soften a cake. After cold storage, let the pack reach room temperature before opening so condensation does not form on the powder. ## The solution: preservation and precipitation Calcium gluconate dissolves to about 3 g per 100 mL at 20 °C, and the solution is close to neutral. It is also a good medium for microorganisms. A bulk hold at room temperature needs a preservative system or a validated sterile process before filling; a dry stick pack avoids the issue because the consumer adds water at the point of use. The calcium can also leave the solution without any loss of assay. Phosphate, citrate, sulfate and carbonate form calcium salts that may appear as haze or sediment. Whether that happens depends on concentration, pH and the other ingredients, so the matrix trial is the place to find out. In an acidic drink, gluconate sits in equilibrium with glucono-delta-lactone. The anion changes form over time even while the calcium remains dissolved, which can move both the taste and the analytical result. A neutral solution avoids that equilibrium but keeps the microbial risk. ## What moves during storage Storage factors for calcium gluconate | Factor | Effect | Control | Humidity | Water figure moves; caking and flow loss | Sealed pack; dry store; liner closed | Heat | Faster moisture exchange and solution reactions | Ambient store; cool process | pH | Gluconate–lactone equilibrium; precipitation risk | Validate matrix pH and hold time | Phosphate, citrate | Calcium precipitation as haze or sediment | Check the formula; dilute or reformulate | Microorganisms | Growth in aqueous solution | Preservative or sterile fill | Light | Limited effect on the solid; check colour and pack | Opaque pack; normal warehouse light The factors combine. A warm, humid store is worse than either condition alone, and a neutral solution in a warm room carries both microbial and precipitation risk. The answer is always specific: which pack, which condition, which matrix and how long. ## Designing the stability trial Write the protocol around the pack that will be sold. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% relative humidity represent the warehouse; 40 °C/75% relative humidity is the accelerated arm. Add a light-exposure arm if the finished pack is transparent. Measure assay, calcium, water, appearance and microbiology at each time point. Add a gluconate-specific assay when the matrix contains another calcium salt or a sugar. For a liquid, add pH, appearance and a precipitate check. Report the individual results, not only a pass statement, and identify the pack and the lot family. Bulk data belongs to the bulk pack. A 25 kg drum and a 1 kg pouch differ in headspace and in how often they are opened, so a summary written for one does not automatically cover the other. ## Matrix and dosage form A tablet or capsule has low water activity, but the excipients can still move moisture. Check the water figure at release and after storage, and inspect the fill for colour or caking. A hygroscopic excipient can pull more water than the calcium gluconate does. A granulated grade may flow better, but the granule and the tablet are separate specifications. An effervescent tablet is the extreme case: it is designed to react when water is added, and it will react in the package if moisture gets in. The calcium gluconate is not the acid or the base, but the tablet's sensitivity to humidity is still the controlling risk. A stick pack depends on the seal and the foil; a pinhole is a failure, and the strip should be inspected as well as the powder. A beverage adds pH, heat and microbial risk. Bulk stability is the starting point, not the answer. The formulator decides whether a preservative, a pH adjustment or a sterile process is needed, and that decision cannot repair a pack that lets moisture through. ## Assigning the retest period There is no single shelf-life number for calcium gluconate that applies to every pack and every store. The retest period is assigned to the specification from the stability file for that pack. A figure quoted without a pack, a condition and a test panel is a claim rather than a shelf life. At the end of the period, re-assay the retained sample before extending use. Do not extend by assumption, and do not carry a bulk figure over to a repack. The product hub lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the compliance page covers the market file; the quality page describes the release workflow. ### 04 Calcium gluconate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-gluconate/moq/ Reviewed: 2026-11-19 Calcium gluconate is ordered in a 1 kg foil pouch or a 25 kg fiber drum. One pouch is the minimum, the standard lead time is 1–7 days, and the catalogue powder passes 40 mesh. A quotation becomes comparable only when the hydrate, the calcium figure, the destination and the documents are stated with the quantity. In one lineThe 1 kg pouch is the smallest unit that carries its own lot code; the 25 kg drum is the scale-up pack. ## Why the order starts at one pouch The pouch is the unit of traceability. It arrives with a lot code and a certificate, it can be sampled and tested, and the retained sample can be kept beside the trial batch. A formulator can qualify a source from one pouch without committing to a drum. That is the commercial logic: the smallest pack that still behaves like a lot. Calcium gluconate is a high-fill material. A 500 mg calcium dose needs about 5.6 g, so 1 kg holds roughly 180 doses of calcium. That is enough for a bench trial or a small batch, not for a production run. The drum is the production unit, and it brings a longer storage period and a larger commitment. The minimum is set by the pack, not by a volume target. Splitting a drum into smaller units is possible, but the split is a repack with its own handling record. The original lot identity is diluted, and the sub-pack needs its own label and traceability. A repack is a separate decision from the catalogue pack. ## Pack options Calcium gluconate packs and formats | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Different particle-size specification | Custom mesh | On request | Tablet or capsule feed | Qualify the new particle profile The standard powder is 40 mesh: at least 95% passes the sieve. A granule or a custom mesh is a new specification, not a different bag for the same material. Say so before the quotation if the press needs a coarser or freer-flowing feed, because the change moves the particle-size line and can move the lead time. ## Dispatch and transit Allow 1–7 days from order confirmation for the standard pack. That window covers picking, document preparation and dispatch. It does not cover freight transit, customs clearance or the buyer's own quality release. A custom granulation, a custom mesh or a non-standard pack adds time, and the quotation should show it as a separate line. Ask for the dispatch date as well as the lead time. A drum may move on a pallet while a pouch moves as a parcel; the Incoterm decides who books the freight and who clears the entry. Send the documents with the lot rather than after it, so the importer is not holding material it cannot release. ## Six details for a quotation Six details make two quotations comparable: - Material and hydrate. Calcium gluconate monohydrate, CAS 18016-24-5, with the water range. - Specification. Assay basis, calcium figure, water, particle size, heavy metals and microbiology. - Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated or custom-mesh variant. - Destination and Incoterm. Country, port or address, and the trade term. - Documents. COA, specification, SDS and any market-specific statement the importer needs. - Use and market. Supplement, food or another use, and the country where it will be sold. Without the hydrate and the market, the quotation is incomplete. The same powder can fit one destination and fall outside the file for another, and the paperwork is part of what is being offered. Commercial terms are stated on the quotation, not on this page. ## Qualifying from a sample Use the pouch as the qualification sample. Run identity, assay, calcium, water and microbiology before scaling, and keep a retained sample from that pouch. The lot code on the sample, the certificate and the quotation should agree. If they do not, the sample is a demonstration rather than a lot. A smaller bench quantity can be discussed, but it is a split from a larger lot and should be documented as a repack. Do not assume that a bench sample and the production drum will share a lot number. If the project needs lot continuity, order the pouch and keep the balance sealed. ## Terms worth settling early The quotation covers the commercial terms, the Incoterm, the pack, the lead time and the documents. The quality terms sit beside it: the specification revision, the certificate per lot, the retained sample, the retest period and the change-control route. A quality agreement signed before the first production order is easier than one negotiated after a dispute. Returns and replacements follow the quotation and that agreement. A lot that fails the agreed specification should be resolved through the retained sample and a joint re-test, not through a photograph. Agree in advance who pays for the referee test and which laboratory both sides accept. The product hub carries the catalogue specification; the COA page lists the release tests; the compliance page covers the market files; the MOQ glossary entry defines the term; the logistics page covers shipping and documents. ### 05 The regulatory file for calcium gluconate URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-gluconate/compliance/ Reviewed: 2026-11-19 Calcium gluconate sits where two EU routes meet: the food-additive entry E578 and the mineral source used in food supplements. The file has to name the route the finished product relies on and show that the hydrate, the lot and the label match it. The buyer's regulatory team makes that call; this page sets out the documents and limits the call depends on. In one lineA specification is not a market entry: the file has to connect this salt, this lot and this label to the destination's rules. ## What the file has to answer Four questions sit behind any market file. Which material is being bought, down to the hydrate and the specification revision? Which lot is in the drum, and what did its certificate measure? Which route and which label rules apply where the finished product will be sold? What happens to the file if the source, the process or the pack changes? The certificate answers the lot question, the technical data sheet answers the material question, and the safety data sheet covers handling. The route question remains, and it is the one that decides whether the rest of the file is relevant. Keep the supporting declarations with the file: allergens, GMO status, country of origin, residual solvents and any customer-specific statement. A declaration that is missing should be identified before the purchase order, not after the container arrives. Version numbers and dates make the folder auditable; undated PDFs do not. ## European Union In the EU, general food law under Regulation (EC) No 178/2002 applies first, followed by the labelling rules in Regulation (EU) No 1169/2011 and the contaminant limits in Regulation (EU) 2023/915 as of this review. If the material is used as an additive, E578 under Regulation (EC) No 1333/2008 is the relevant entry, and Commission Regulation (EU) No 231/2012 supplies the purity criteria. If it is used as a calcium source in a supplement, Directive 2002/46/EC and its national implementations frame the file. The two routes do not impose the same tests, and the buyer's team decides which one the product needs. Great Britain and Northern Ireland diverge here. The GB file follows the current GB rules; Northern Ireland follows the EU framework. Check the consolidated text for the destination rather than relying on a summary, and keep the version that was reviewed with the order. ## United States In the United States, calcium gluconate is listed among the direct food substances affirmed as GRAS at 21 CFR 184.1199, and calcium lactate at 21 CFR 184.1207. Those listings support a food use under the stated conditions; they do not answer every supplement question. A dietary-supplement file also has to consider the FD&C Act as amended by DSHEA, current good manufacturing practice under 21 CFR 111, and the Supplement Facts format in 21 CFR 101.36. The buyer's regulatory team confirms the basis and the dose. The GRAS entry describes the anhydrous salt under CAS 299-28-5. The monohydrate in this specification adds water of crystallisation. That is a hydrate of the same salt rather than a different molecule, but the buyer's team should confirm that the hydrate fits the intended use before the label is fixed. ## Limits and the finished dose The contaminant review starts with the drum result and ends with the daily dose. The catalogue limits below are this specification's release gate. The destination can be stricter: for E578 and E327, the purity criteria in Regulation (EU) No 231/2012 set lead at 2 mg/kg, below the 3 mg/kg catalogue limit. The current contaminant regulation and the finished-product calculation decide the final figure. Contaminant limits to confirm for the finished product | Parameter | Catalogue limit | What the file confirms | Lead (Pb) | ≤3 mg/kg | Lot result, method, and the 2 mg/kg additive check where E578 applies | Arsenic (As) | ≤2 mg/kg | Lot result, method and the destination limit | Cadmium (Cd) | ≤1 mg/kg | Lot result and the finished-product calculation | Mercury (Hg) | ≤0.1 mg/kg | Lot result and method | Microbiology | APC ≤1,000 cfu/g; E. coli and Salmonella absent | The lot counts and the absence statement The calcium figure belongs in the same review even though it is not a contaminant. A calcium result that is high while the gluconate assay is low can point to another calcium salt in the powder. That is a specification failure, not a labelling question. ## Claims and the label The nutrition panel declares calcium; the ingredient list names the salt. The two numbers are not interchangeable. A 500 mg calcium claim needs about 5.6 g of calcium gluconate monohydrate, while a 1,000 mg calcium gluconate tablet delivers about 89 mg of calcium. A label that puts the salt weight into the calcium column overstates the mineral by more than ten times. In the EU, calcium claims under Regulation (EC) No 1924/2006 depend on the finished product meeting the nutrient threshold, with a reference intake of 800 mg. In the United States, the Daily Value is 1,300 mg and the format follows the nutrition-label rules. The brand's reviewer confirms the wording for the product, the form and the market. This page makes no disease-related claim for the ingredient. ## Documents to hold - Specification with revision number, hydrate state and CAS number. - Lot certificate with methods, limits and measured results. - Technical data sheet and safety data sheet. - Allergen, GMO, origin, residual-solvent and non-irradiation declarations where the market asks for them. - Particle-size result with the sieve method. - Any importer-specific statement or declaration of conformity. ## Before the first order - The hydrate, CAS number and specification revision are named on the order. - The lot certificate and the declarations are on file and dated. - The contaminant results have been converted to the finished-product dose. - The additive or supplement route is confirmed for the destination. - The calcium claim and the ingredient name have been reviewed against that route. - Source, process and pack are covered by change control. The product hub carries the catalogue specification; the COA page explains the lot certificate; the identity page covers the analytical evidence; the quality page describes the release file; the EU regulatory note provides the framework reference. ### 06 How we prove a calcium gluconate lot is the gluconate URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-gluconate/identity/ Reviewed: 2026-11-19 The question is not whether the powder contains calcium; every calcium salt does. The question is whether the anion is gluconate and whether the crystal is the monohydrate. IR, a gluconate-specific assay, Karl Fischer and XRD answer those questions, while the calcium titration only establishes the quantity. A certificate that stops at the calcium figure has measured the element and left the identity open. In one lineIdentity needs the gluconate anion as well as the calcium: a calcium titration alone fits carbonate, citrate and lactate too. ## Checks that answer different questions No single measurement establishes a salt. The document names what was ordered, the spectrum looks at the functional groups, the titration measures calcium, and the anion assay measures the part that makes the material gluconate. Water and diffraction then place the crystal. Each check can pass while another fails, which is why they are read together. Checks used to establish calcium gluconate identity | Check | What it answers | Method | What it establishes | Document | Is the hydrate and CAS named? | Name, CAS number, formula | Only what was ordered | Spectrum | Do the functional groups match? | IR against a reference | The salt family, not the assay | Calcium | Is the calcium figure consistent? | Complexometric titration | Quantity of calcium | Anion | Is gluconate present? | Ion chromatography or an equivalent assay | The gluconate itself | Crystal | Is it the monohydrate? | XRD and Karl Fischer water | The hydrate state ## The calcium-to-gluconate balance One calcium ion belongs to one gluconate unit, so the mass ratio is fixed: 40.078 ÷ 448.39 = 1 : 11.19 for the monohydrate, or 1 : 10.74 for the anhydrous salt. The theoretical calcium figures follow: 8.94% for the monohydrate and 9.31% for the anhydrous form. The catalogue range of 8.5–9.5% brackets both, which is why calcium alone cannot fix the hydrate. The ratio is still a useful screen. A 8.94% calcium result should sit with an assay near 100% calcium gluconate monohydrate; a 8.5% result should sit near 95.1%. If the calcium is in range but the gluconate assay is far below the ratio, the powder is a blend. Calcium carbonate, calcium lactate and calcium citrate can all be blended to hit a calcium figure, but none of them supplies the gluconate. Water completes the balance. At 4.0% water and a 100% dried-basis assay, 100 g of powder holds 96.0 g of dry matter and 8.94 g of calcium. At 6.0% water the as-is calcium falls to about 8.75% while the dried-basis assay remains in range. Reading calcium without water can make a correct lot look low, or a diluted lot look normal. ## Diffraction and the solid state Diffraction addresses the crystal rather than the solution. The monohydrate and the anhydrous salt pack into different lattices and give different patterns, so a diffractogram can show which hydrate is in the drum. A crystalline foreign phase, such as calcite in a carbonate blend or a lactate pattern in a mixed salt, may also appear. XRD is not a purity assay, and it does not measure calcium. It is a solid-state check that earns its place when the hydrate is disputed or a new source is being qualified. Ask for the reference pattern and the detection limit before accepting a “match” statement. A report that says only “XRD conforms” has not shown the reader the evidence. Heavily milled or amorphous material can give a broad pattern that is hard to compare. In that case IR, the anion assay and the water figure carry more weight. The methods are complementary; none of them is a substitute for the others. ## Blends and substitutions Substitutions that can pass a calcium titration | Material | Why it is used | Signal | Test | Calcium carbonate | Cheap calcium; high density | Calcium high; gluconate low; calcite pattern | Anion assay, XRD, FTIR | Calcium lactate | Similar white powder | Calcium near 13%; gluconate low | Anion assay, IR, XRD | Calcium citrate | Higher calcium; different solubility | Calcium near 21%; gluconate low | Anion assay, IR | Maltodextrin or sugar | Bulking and dilution | Calcium and assay low; water normal | Mass balance, anion assay | Excess water | Lowers the as-is figures | Water above 6.0% | Karl Fischer | Sulfate or chloride | Neutralisation residue | Conductivity or ash; ion response | Ion chromatography Colour proves little. White to off-white covers many powders, and a blend can match it. The reliable signals are the anion assay, the calcium-to-gluconate ratio, the water figure and the crystal pattern. ## Identity clauses for the specification - “Calcium gluconate monohydrate, CAS 18016-24-5, C12H22CaO14·H2O.” - “Assay 98.0–102.0% as calcium gluconate by complexometric titration; state the basis.” - “Calcium 8.5–9.5%; water 3.0–6.0% by Karl Fischer.” - “IR spectrum to match the reference; attach the spectrum or the band list.” - “Gluconate-specific assay by ion chromatography or an equivalent method where the anion is to be confirmed.” - “XRD reference pattern for the monohydrate where the hydrate state is in question.” - “Particle size ≥95% through 40 mesh; heavy metals and microbiology as listed.” ## Questions to put to the supplier - Which hydrate is this lot, and which CAS number appears on the certificate? - Will you send the IR spectrum and a gluconate-specific assay, not only the calcium result? - What are the calcium and water figures, and how was the assay basis calculated? - Has the lot been examined by XRD, and can the pattern and reference be shared? - If the result is disputed, will you join a re-test on the retained sample? Answers to those five questions make an identity file. A calcium percentage on its own does not. The product hub carries the catalogue specification; the COA page shows where each figure sits on the certificate; the grades page compares the hydrates; the XRD method note explains the solid-state check; the quality page describes the release workflow. ### 01 What the COA for calcium L-threonate actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-l-threonate/coa/ Reviewed: 2026-11-19 A calcium L-threonate certificate reports appearance, identification by infrared spectrum and HPLC, the salt assay by HPLC at 98.0–102.0%, elemental calcium by complexometric titration at 12.0–13.5%, loss on drying at not more than 6.0%, particle size and the contaminant panels. The assay and the calcium are separate measurements, and the page is only readable when each one carries its method and its basis. These are the catalog limits; the batch COA confirms a particular pack. In one lineThe salt assay and the elemental calcium answer different questions, and the water figure is what keeps the two numbers consistent. ## Reading the certificate line by line Read the certificate as a laboratory report that should survive an audit, not as a marketing attachment. Every line needs the parameter, the technique that produced the number, the release limit and the measured result. A bare “conforms” hides the evidence and asks the reader to accept a conclusion on trust. The identity lines decide whether the powder is the named salt. The assay line decides how much of the salt is present. The calcium line decides how much of the element the powder carries, which is the figure the finished label will use. Identity, assay, calcium and release limits · calcium L-threonate | Parameter | Method | Release limit | Appearance | Visual | White crystalline powder | Identification | Infrared spectrum and HPLC retention | Conforms to reference | Assay (calcium L-threonate) | HPLC | 98.0–102.0% | Calcium (Ca) | Complexometric titration | 12.0–13.5% | Loss on drying | Gravimetric | ≤6.0% | Particle size | Sieve analysis | ≥95% through 40 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent ## The assay, the calcium and the water The HPLC assay measures calcium L-threonate as a salt. The titration measures calcium as an element. They are not interchangeable, and a certificate that reports only one of them has left half of the specification untested. The formula C8H14CaO10 has a molecular weight of about 310.27, of which calcium accounts for 40.08. The theoretical calcium content of the anhydrous salt is therefore 40.08 ÷ 310.27 = 12.92%. The catalog window of 12.0–13.5% sits around that figure. A lot at the top of the loss-on-drying limit carries water that dilutes the salt: at 6.0% water, a powder with a 100% assay would report about 12.1% calcium as received. That is why the water line belongs next to the calcium line, not in a footnote. The certificate should state whether the assay and the calcium are calculated on the dried basis or on the powder as received. A 100% result on the dried basis is not 100% of the drum. If the basis is missing, the two percentages cannot be compared with the specification or with another supplier's certificate. Identification is the third line. Infrared spectroscopy compares the threonate fingerprint with a reference; HPLC retention confirms the same peak in the chromatographic system. Neither test establishes the L-configuration on its own, so a label that names the L-isomer should be supported by a method that does. ## Release limit and batch result The release limit is the boundary for accepting the lot. The batch result is what the laboratory measured on that lot. Both belong on the page, in separate columns, with the method beside them. A result column that repeats the specification range has not measured anything; it has copied the acceptance criterion. What the result column should contain | Parameter | Release limit | Result column | Assay | 98.0–102.0% | A measured percentage, with the basis and the HPLC method | Calcium | 12.0–13.5% | A measured percentage, with the titration method and the basis | Loss on drying | ≤6.0% | A measured percentage and the drying condition | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot “Passes specification” is a conclusion. The reader should be able to reach it from the numbers on the page. For microbiology the evidence is a count plus an absence statement; for heavy metals it is a figure per element, not a single total. A certificate that reports a sum of heavy metals has hidden the element that matters. ## What moves between batches Crystallisation and drying move the water figure and, with it, the calcium as received. The 40 mesh result can move with a new mill setting or a replacement sieve while the chemistry stays the same. The assay can move with the standard, the integration or the column, which is why the method belongs on the certificate. Appearance is a white crystalline powder. Colour is a weak signal: a slight cream tint can come from a drying step, while a dark or uneven colour deserves an investigation. Rejecting a lot on colour alone is not a chemical decision. A drift across lots is more informative than one result near an edge. Calcium falling while the assay holds points to water or to the counter-ion; assay falling while calcium holds points to the chromatographic method or to dilution. The lot code on the certificate should match the pouch, the drum and the retained sample. ## When an independent test earns its place Order an outside test for a new source, a first shipment into a regulated market, a disputed identity or a customer audit. The useful panel is not a full repeat of the supplier's certificate: it is the HPLC assay, the calcium titration, infrared identity, loss on drying, ICP-MS for the heavy metals and the microbiology set. Add a magnesium screen when the consignment could have been confused with magnesium L-threonate; the two salts share the threonate anion but not the mineral. Add optical rotation or a chiral method when the L-configuration is part of the label claim. Ask the laboratory to report its detection limit for each screen, because a “not detected” entry without a detection limit says more about the method's sensitivity than about the powder. Keep the chain of custody intact: the material that was tested should be the material that was retained, and the report should identify the lot. When the question is the identity of the salt, a referee test on the retained sample is more useful than a second run of the same assay. ## What to compare between suppliers Put six lines side by side: salt name and CAS number; assay result with method and basis; calcium result with basis; loss on drying and the hydrate state; identity evidence, including the L-configuration; and the contaminant and microbiology panel with the pack size and lot code. Two quotations that agree on calcium but differ on the assay basis, the water figure or the identity method are not describing the same powder. The catalog limits are on the calcium L-threonate product page. The salt and hydrate options are compared on the grade page; the tests that separate threonate from other calcium salts are on the identity page; the titration is described in the methods library; and the release workflow is on the quality page. ### 02 Calcium L-threonate: hydrate, mesh and the salt you name URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-l-threonate/grades/ Reviewed: 2026-11-19 Calcium L-threonate is supplied as a white crystalline powder with a salt assay of 98.0–102.0% and 12.0–13.5% elemental calcium. The grade decisions are the water limit and hydrate state, the particle size, and the salt name itself: magnesium L-threonate is a different product with a different mineral and a different label. None of these is a purity tier, and each one changes the mass, the flow or the declaration. In one lineThe grade question for calcium L-threonate is water, mesh and the salt name, because each one moves the calcium figure or the label before it moves the powder. ## Three decisions, not one grade “Grade” is a loose word for a calcium salt. It can mean the hydrate state, the particle-size cut, the granulated form, or simply the assay window. For calcium L-threonate the assay window is narrow and the chemistry is fixed; what actually changes between purchase orders is the water, the mesh and the identity of the salt. The catalog form is a 40 mesh crystalline powder with loss on drying at not more than 6.0%. Granulated material is available on request. A granulated grade is a different physical specification, not a setting on the same certificate, and it should be quoted and released against its own particle-size line. The L in the name is part of the identity. L-Threonate is the L-isomer of threonic acid; a generic “calcium threonate” does not state which isomer is in the drum. If the label names the L-form, the specification and the identity file should say how that configuration is controlled. ## Calcium L-threonate beside the alternatives The useful comparison is not this product against a higher-assay version of itself. It is against the other calcium salts a formulator might put in the same serving, and against the magnesium salt that shares the threonate name. Calcium L-threonate, calcium citrate and magnesium L-threonate | Salt | Mineral content | Salt for 200 mg mineral | Water solubility | Label name | Calcium L-threonate | Ca 12.0–13.5% | 1.48–1.67 g | Freely soluble | Calcium L-threonate | Calcium citrate tetrahydrate | Ca 21.0–22.0% | 0.91–0.95 g | Sparingly soluble | Calcium citrate | Magnesium L-threonate | Mg 7.2–8.3% | 2.41–2.78 g | Freely soluble | Magnesium L-threonate The last row is not a calcium source at all. A magnesium L-threonate lot cannot fill a calcium claim, and a calcium lot cannot fill a magnesium claim; the minerals and the label names are different. The citrate row is the closer calcium alternative for a large single dose; the level-four comparison takes that choice through the arithmetic and the label. ## Solubility, flow and the 40 mesh Calcium L-threonate dissolves freely in water, and the solution is neutral to slightly acidic. That is the property that makes it useful for sticks and drink mixes: a 1.5 g serving can go into a glass without leaving a suspension. It also means the powder can take up moisture from the air, so the loss-on-drying limit and the seal are part of the handling specification, not only the release file. The standard 40 mesh cut is a compromise between flow and dissolution. A granulated grade flows better and makes less dust on a tableting press; the 40 mesh powder disperses faster but can cake. Ask for the particle-size distribution and the bulk density if the powder is going into a capsule or a tablet, because those numbers, not the assay, decide whether the run is stable. The solution pH is a compatibility number. Calcium can react with phosphate, carbonate or citrate in a blend and form a less soluble salt; the precipitate may appear only after the drink is mixed. A bench compatibility trial is cheaper than a market complaint. ## Calcium per gram and the fill weight The calcium figure sizes the dose. At 12.0–13.5% calcium, one gram of powder carries 120–135 mg of the element. A 100 mg claim needs 0.74–0.83 g; a 200 mg claim needs 1.48–1.67 g; a 500 mg claim needs 3.70–4.17 g. The last figure is the one that changes the dosage form. A 500 mg calcium serving from the threonate is more than 3.7 g of powder before any excipient, which is a large sachet or several capsules. A 200 mg serving is about 1.5 g, which fits a stick or a large capsule. A 100 mg serving is a tablet-sized mass. If the brief calls for a compact tablet at 500 mg calcium, the threonate is the wrong carrier and the citrate or the carbonate does the job with less mass. Do not confuse the salt mass with the calcium mass on the label. A serving of 1.5 g of calcium L-threonate delivers about 180–203 mg calcium depending on the lot; the label declares the calcium, and the ingredient list declares the salt. ## What to write into the specification Write the grade into the specification, not only the product name: - “Calcium L-threonate (L-threonic acid calcium salt), CAS 70753-61-6, C8H14CaO10.” - “Assay 98.0–102.0% by HPLC; state the basis.” - “Calcium 12.0–13.5% by complexometric titration; state the basis.” - “Loss on drying ≤6.0%; name the hydrate state.” - “Identification by infrared spectrum and HPLC; state how the L-configuration is controlled.” - “Particle size ≥95% through 40 mesh; granulated grade on request.” - “Heavy metals and microbiology per the catalog panel.” - “Destination market and label name confirmed before the order.” We supply the catalog grade. A granulated powder is a separate purchase with its own specification and certificate; moving to it needs a written change control, not a note on the purchase order. ## When a different salt is the better carrier The threonate is not the default calcium salt. Choose a different carrier when the serving needs 500 mg or more of calcium in a small tablet, when the formula depends on an acid reaction, or when the target mineral is magnesium rather than calcium. Calcium citrate tetrahydrate carries about 21–22% calcium and is available in a compact tablet; calcium carbonate carries about 40% and reacts with acid. Magnesium L-threonate is the magnesium product, with 7.2–8.3% magnesium and no calcium. A substitution in either direction is a new formulation and a new label, not a warehouse swap. The product hub carries the catalog specification; the calcium citrate page and the magnesium L-threonate page cover the two alternatives; the methods library describes the identity and calcium tests; the quality page explains how a grade is released. ### 02.1 Calcium L-threonate vs calcium citrate: elemental calcium, solubility and the label URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-l-threonate/grades/calcium-l-threonate-vs-citrate/ Reviewed: 2026-11-19 Calcium L-threonate carries 12.0–13.5% elemental calcium; calcium citrate tetrahydrate carries 21.0–22.0%. A 200 mg calcium claim therefore needs 1.48–1.67 g of the threonate or 0.91–0.95 g of the citrate. The threonate dissolves freely in water while the citrate is only sparingly soluble, so the choice changes the dosage form and the label before it changes anything else. In one lineThe threonate carries about 60% of the calcium in citrate per gram but dissolves freely, so the same claim needs more powder and a different dosage form. ## Elemental calcium per gram and per claim Both salts are calcium sources, but the calcium is attached to a different anion and the anion is heavy. That is why the same label claim turns into very different powder weights. The table converts a claim into salt mass at the catalog calcium windows; it is arithmetic, not a recommendation. Elemental calcium and the salt mass for a claim | Salt | Elemental calcium | Salt for 100 mg Ca | Salt for 200 mg Ca | Salt for 500 mg Ca | Calcium L-threonate | 12.0–13.5% | 0.74–0.83 g | 1.48–1.67 g | 3.70–4.17 g | Calcium citrate tetrahydrate | 21.0–22.0% | 0.45–0.48 g | 0.91–0.95 g | 2.27–2.38 g | Calcium citrate, anhydrous | About 24.1% | 0.41 g | 0.83 g | 2.07 g | Calcium carbonate | About 40.0% | 0.25 g | 0.50 g | 1.25 g For the same calcium, the threonate needs roughly 1.6–1.8 times the mass of the citrate tetrahydrate. At 100 mg that difference is small enough to hide in a tablet. At 500 mg it is the difference between a large sachet and a compact tablet, and that is before any excipient is added. ## From the label claim to the weigh-up The label declares calcium, not the salt. To size a batch, divide the calcium claim by the calcium figure on the certificate, not by the figure on the product page. A 200 mg claim against a lot at 12.0% needs 1.67 g of powder; the same claim against a lot at 13.5% needs 1.48 g. A 0.19 g swing on a 1.5 g serving is large enough to move the fill weight and the tablet size. Use the calcium result that matches the basis. If the certificate reports calcium on the dried basis, multiply by one minus the loss on drying to get the as-received figure before sizing the scoop. A lot with 12.9% calcium on the dried basis and 5.0% water carries about 12.3% calcium as received. Sizing from the dried figure would overfill the serving. At 200 mg calcium, 1.5 g of threonate is a large capsule or a single stick. At 500 mg, 3.7–4.2 g is a sachet, a divided serving or a different salt. The dosage form should be chosen with the mass in view, not after the label is designed. ## Solubility: freely soluble against sparingly soluble Calcium L-threonate is freely soluble in water, and the solution is neutral to slightly acidic. Calcium citrate tetrahydrate is sparingly soluble in water and dissolves in dilute acid. In a glass, the difference is visible: the threonate goes into solution at a normal serving, while the citrate can leave a suspension or a sediment unless the drink is acidic or the powder is kept suspended. That makes the threonate the easier starting point for a clear drink, a stick or a ready-to-mix powder. It does not make the solution automatically stable. A near-neutral aqueous solution needs a preservative system or a validated thermal process, and the pH has to be checked against the other ingredients. Calcium can react with phosphate, carbonate or citrate in the matrix and form a less soluble salt, which may show up as haze after mixing rather than in the bulk powder. The citrate has the advantage in the solid dose. It carries more calcium per gram, so a tablet or capsule can be smaller, and its acid solubility fits a stomach-acid story rather than a glass of water. For a swallowable tablet at a high calcium load, that mass advantage is usually the deciding factor. ## What the label has to say The ingredient list names the salt: “calcium L-threonate” or “calcium citrate”. A generic “calcium” does not identify the source that was bought, and the two salts are not interchangeable in the label arithmetic. The nutrition declaration states the calcium in mg and as a percentage of the reference intake, not the salt mass. In the EU, the calcium reference intake is 800 mg, so a 200 mg serving declares 25% of the reference intake. In the US, the Daily Value is 1,300 mg and the Supplement Facts panel declares “Calcium (from calcium L-threonate)” at 15% of the Daily Value for the same 200 mg. The percentages are label arithmetic; they do not change with the salt, but the mass behind them does. A label can legitimately declare 1.5 g of calcium L-threonate and 180–203 mg calcium. It cannot declare 1.5 g of calcium from 1.5 g of the salt. The salt mass and the calcium mass are different figures, and the certificate supplies both. ## When to choose which Choose calcium L-threonate when the dosage form is aqueous, when the calcium claim is in the 100–200 mg range, and when the label is built around the threonate salt. The freely soluble powder is the practical choice for a clear stick or a drink mix, and 1.5 g per serving is a workable sachet. Choose calcium citrate tetrahydrate when the calcium claim is higher, when the tablet or capsule has a tight fill weight, or when the formula relies on acid solubility. It carries about 21–22% calcium, so 500 mg of calcium fits in about 2.3 g of salt rather than 3.7–4.2 g. The citrate is also the more established label ingredient for a compact solid dose. Neither salt is a drop-in for the other. A switch changes the salt mass, the fill weight, the taste and the label name, and it needs a new specification, a new batch record and a label review. If the target is magnesium rather than calcium, the answer is neither of these: magnesium L-threonate is a different product with 7.2–8.3% magnesium and its own label. ## What to check on the certificate For either salt, read the salt name and CAS number, the calcium result and its basis, the assay, the loss on drying, the identity evidence and the particle size. For the threonate, add the question of how the L-configuration is controlled; for the citrate, confirm the hydrate, because the anhydrous salt carries more calcium than the tetrahydrate. Do not compare two certificates on the calcium percentage alone. A 13.0% calcium threonate and a 21.5% calcium citrate are both on specification, and the number that matters for the label is the salt mass the serving needs. The calcium L-threonate product hub and the calcium citrate page carry the catalog figures; the COA page explains the certificate lines; the methods library describes the calcium titration; the quality page describes the release route. ### 03 Calcium L-threonate stability: moisture, solution and the pack URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-l-threonate/stability/ Reviewed: 2026-11-19 The solid keeps in a sealed pack that keeps water out; the 6.0% loss-on-drying limit is a release gate, not an allowance for storage. In water the salt dissolves freely, and the solution turns the question into pH, microbial control and matrix compatibility. Shelf life is assigned for a pack and a matrix, not for the name on the certificate. In one lineThe dry powder keeps when the seal keeps water out; the solution is a pH, microbial and matrix question, and the pack decides which of the two applies. ## Keeping the powder dry The catalog sets loss on drying at not more than 6.0%. That figure is measured on the lot at release; it is not a reserve that the powder can spend in the warehouse. An opened pouch is no longer the pack that was released: moisture enters through the open mouth, loss on drying climbs and the calcium figure as received falls. Whoever opens the pack becomes part of the moisture control, even though the certificate does not record it. The powder is freely soluble, which also makes it willing to take up water and cake. A caked pouch is not necessarily a failed lot, but it is a handling signal: the seal was open, the store was humid or the pack was compressed. Break up the assessment with the retained sample rather than the surface of the opened pack. Keep the original foil pouch closed between weighings, and keep the 25 kg drum on a pallet with the liner closed. A fiber drum relies on the liner for its moisture barrier; a drum standing on a concrete floor in a humid room is a slow leak. Record the date of opening and use the remainder within the stated in-use period. ## The solution: freely soluble, not automatically stable Calcium L-threonate dissolves freely in water to give a solution that is neutral to slightly acidic. That is convenient for a stick or a drink mix, and it is also the format with the most variables. Water activity is high, so microorganisms have what they need; a preservative system or a thermal process is part of the formula, not an afterthought. pH is the second variable. The solution starts near neutral, and a matrix can move it; calcium can then react with phosphate, carbonate or citrate and form a less soluble salt. The result may be a haze, a sediment or a gritty mouthfeel that appears after the drink is mixed rather than in the bulk powder. A compatibility trial at the intended pH and concentration is the only reliable check. Heat and oxygen belong to the matrix. A hot-fill or pasteurisation step adds a heat load that the dry powder never sees, and the other ingredients in the drink may be more sensitive than the calcium salt. The bulk stability of the ingredient is the starting point for the beverage work, not the answer. ## What drives change during storage Factors that move calcium L-threonate during storage | Factor | What it does | Control | Moisture | Raises loss on drying; caking; lowers the as-received calcium | Sealed pouch; closed liner; desiccant where needed | Heat | Accelerates moisture pickup and matrix reactions | Controlled store; cool process | pH | Moves solution stability and calcium solubility | Validate the matrix pH; buffer if needed | Microorganisms | Grow in an aqueous, near-neutral solution | Preservative system or validated thermal process | Anions | Phosphate, carbonate or citrate can bind calcium | Compatibility trial; sequence the addition | Pack | Seal, liner and headspace set the moisture barrier | Foil pouch; intact liner; controlled opening These factors act together. A warm, humid store and an opened pouch are worse than either alone, and a neutral solution in a warm filling line combines microbial risk with a heat load. The useful question is not whether calcium L-threonate is stable in general, but stable in which pack, at which condition and for how long. ## Designing the stability study Choose the pack and the storage condition first, then fix the time points and the test panel before any sample goes into the chamber. Use 25 °C/60% relative humidity for long-term storage, 30 °C/65% relative humidity for intermediate storage, and 40 °C/75% relative humidity as the accelerated arm. If the pack is clear or the label claims a light-resistant container, add a light-exposure arm; a dark incubator cannot see that failure mode. Test assay, calcium, loss on drying, appearance and microbiology at each point. For a solution or a stick, add pH and the preservative assay, and test the finished matrix rather than the bulk powder alone. The report should list each result rather than a single pass mark, and it should name the pack and the lot family. Ask for the data for the pack you will buy. A 1 kg pouch and a 25 kg drum differ in surface-to-volume ratio, headspace and opening history, so a study on one pack does not describe the other. ## The finished formula changes the answer A capsule or tablet has low water activity, yet the shell and the excipients can still move moisture into the fill. Check loss on drying at release and after storage, and check the appearance and hardness of the fill. A 1.5 g threonate serving is a large fill; the excipient load and the tablet size have to be designed around it. A stick pack lives or dies by the foil and the seal. A pinhole is a failure, and the strip needs inspection as well as the powder. A beverage brings pH, heat, oxygen and microbial risk together; the formulator decides whether a preservative, a thermal process or a hurdle combination is needed, and that decision belongs in the stability file. The ingredient does not repair a pack that lets moisture in, and an overage does not repair a formula that separates. Both are formulation decisions, and both should be tested in the final matrix. ## How a retest period is assigned There is no single shelf-life figure for calcium L-threonate, because the answer changes with the pack and the matrix. A retest period is written onto the specification only when stability data for that pack support it. A figure quoted without a pack, a storage condition and a test panel is an assertion, not a shelf life. After the retest period, re-assay the retained sample before extending use. Do not extend by assumption, and do not carry a bulk figure across to a repacked or granulated container. The product hub lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the methods library describes the assay and calcium tests; the quality page describes the release workflow. ### 04 Calcium L-threonate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-l-threonate/moq/ Reviewed: 2026-11-19 Calcium L-threonate starts at a 1 kg foil pouch, and the bulk unit is a 25 kg fiber drum. The catalog powder dispatches in 1–7 days. To turn an enquiry into a firm quotation, send the salt name and CAS number, the assay and calcium basis, the quantity and pack, the destination and Incoterm, the documents and the intended market. In one lineThe 1 kg pouch is the qualification unit and the 25 kg drum is the production pack; both carry the same lot code and the same certificate. ## Why the minimum is 1 kg One kilogram of calcium L-threonate at 12.0–13.5% calcium carries 120–135 g of the element, which is about 600–675 servings at a 200 mg calcium claim. That is enough for a bench trial, a retained sample and an independent test, and it ships as a parcel without a pallet. The pouch is a released lot with its own code, not a scoop taken from a drum. Anything smaller than 1 kg is normally split from a larger lot, which adds a repacking step and separates the material from its original pack record. The 25 kg drum lowers the handling per kilogram and holds 3.0–3.4 kg of calcium, but it also locks up inventory and storage time. The minimum is set by the pack, not by a volume discount. ## Packs and formats Standard calcium L-threonate packs | Pack | Fill | Where it fits | Record | Foil pouch | 1 kg | Bench trial and first run | Keep closed between weighings | Fiber drum | 25 kg | Production runs | Liner closed; code on drum and liner | Granulated grade | Quoted separately | Flow and dust control | New particle-size line The catalog form is a 40 mesh powder: at least 95% through 40 mesh. Granulation is a different specification, not a packing choice. If the dosage form needs a freer-flowing powder, say so before the quotation, because the change moves the particle-size line and may move the lead time. ## Lead time and dispatch The standard pack is quoted at 1–7 days from order confirmation. That window covers picking, document preparation and dispatch; it does not include the shipping transit, customs clearance or the customer's own quality release. A custom granulation or a non-standard pack takes longer, and the additional time should appear as a separate line on the quotation. Ask for the dispatch date, not only the lead time. A 25 kg drum may travel on a pallet and a 1 kg pouch may travel as a parcel; the Incoterm decides who books the freight and who clears the entry. The documents should travel with the lot, not after it. ## What a quotation needs Six items make a quotation firm enough to compare: - Identity. Calcium L-threonate, CAS 70753-61-6, with the L-form and the hydrate state named. - Release specification. The assay and calcium bases, loss on drying, particle size, heavy metals and microbiology. - Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated variant. - Delivery. The destination country and address, the port, and the Incoterm. - Paperwork. The COA, specification and SDS, plus any statement the importer's market requires. - Use and market. Whether the powder goes into a supplement or another food, and where the finished product will be sold. A quotation that omits the market or the salt name cannot be checked against the destination file. The same powder may suit one market and fall outside the file for another. Commercial terms are not published on this page; the quotation carries them. ## The sample is a lot, not a demonstration The 1 kg pack is the qualification unit. Run identity, assay, calcium, loss on drying and microbiology before scaling, and keep a retained sample from that same pack. Sample, COA and quotation should carry one lot code. If the sample cannot be tied back to a lot, it is a bench demonstration rather than a qualification. A smaller bench quantity can be discussed before the order, but it is a repack from a bulk lot, not the catalog pack, and it needs its own record. Never assume that a bench split and the production drum share a lot. A taste, flow and tableting trial belongs beside the analytical tests. The certificate can tell you the calcium figure; it cannot tell you how 1.5 g of powder runs on the press or how the stick tastes. ## Terms to settle before the first order Commercial terms, Incoterm, pack, lead time and documents sit on the quotation. The quality terms sit beside them: specification revision, COA per lot, retained sample, retest period and change-control route. Agree those before the first production order rather than during the first dispute. Returns and replacements follow the quotation and the quality agreement. If a lot fails the agreed specification, work from the retained sample and a joint re-test rather than a photograph of the powder. Settle in advance who pays for the referee laboratory and which laboratory both sides accept. Catalog figures are on the calcium L-threonate product page; release tests are on the COA page; market files are on the compliance page; storage is on the stability page; the tests behind the certificate are in the methods library; the release workflow is on the quality page. ### 05 The regulatory file for calcium L-threonate URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-l-threonate/compliance/ Reviewed: 2026-11-19 Calcium L-threonate is offered as calcium L-threonate, CAS 70753-61-6, with the hydrate state and the calcium figure written into the specification. Whether the salt and the finished product may be placed on a particular market is a route question: a calcium salt can reach the shelf through different food, food-supplement or novel-food routes, and the buyer's regulatory team confirms which one covers the destination. This page lists the framework, the contaminant arithmetic and the documents, and it does not assert a permission. In one lineThe certificate describes one lot; the regulatory file joins that lot to a destination, a route and a label, and the buyer's team owns the route decision. ## What the file has to answer Build the file around four questions. Which specification revision defines the material? Which lot is in the drum, and what did its certificate measure? Which route, limits and label rules apply where the finished product will be sold? And what happens to all three when the manufacturing source, the process or the packaging changes? The lot certificate covers the release data, the technical data sheet covers the specification, and the safety data sheet covers handling. None of the three establishes the route by itself. That answer depends on the destination, the food category, the dose and the exact salt, and it belongs to the buyer's regulatory team. The pack also needs the allergen and GMO declarations, the origin record, a residual-solvent statement and any customer-specific declaration. Version numbers and dates make a document pack usable; a folder of undated files does not. ## European Union The EU framework separates several routes that can apply to a calcium salt: general food law under Regulation (EC) No 178/2002, food information to consumers under Regulation (EU) No 1169/2011, contaminants under Regulation (EU) 2023/915, food supplements under Directive 2002/46/EC, the addition of vitamins and minerals to foods under Regulation (EC) No 1925/2006, and the novel-food route under Regulation (EU) 2015/2283. The route for calcium L-threonate depends on the use and on the current status of the exact substance; the buyer's team checks the consolidated texts and any product-specific entry, as of this review. The label work follows the route. The ingredient list names the salt as sold, and the nutrition declaration states the calcium in mg and as a percentage of the reference intake. The EU reference value for calcium is 800 mg, so a serving that delivers 200 mg calcium declares 25% of the reference intake. The calcium comes from the salt but is declared as the element; the salt mass is not the calcium figure. ## United States The US route is the dietary-supplement framework, with the ingredient and the finished product reviewed separately. The supplier should state, in writing, which basis supports the calcium salt and attach the document behind it; the buyer's team confirms that the basis covers the ingredient, the dose and the label. The route is not established by the certificate, and this page does not assert a status for calcium L-threonate. On the label, the Supplement Facts panel declares calcium with its source, for example “Calcium (from calcium L-threonate)”. The US Daily Value for calcium is 1,300 mg, so a 200 mg serving declares 15% of the Daily Value. Manufacturing is reviewed against the current dietary-supplement good-manufacturing-practice rule, and a structure/function claim is notified and reviewed separately from a disease claim. ## Contaminants and the daily dose The contaminant limits are set for the finished product, not only for the drum. The rows below are the common starting points for a food-supplement file; the destination text and the serving size settle the final number. Contaminant limits for the finished supplement | Parameter | Common supplement limit | Evidence to keep | Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method, limit and the finished-product calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception that applies | Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result and method | Arsenic (As) | Customer or market limit | The agreed limit and the method, stated on the certificate The arithmetic uses the serving weight. A 1.5 g serving of a powder that contains 3 mg/kg lead carries 4.5 µg of lead, so a high daily dose consumes more of the allowance than a small one. The calculation belongs in the file beside the lot certificate, and it should use the same serving size as the label. ## Label and claims The label names the material, the quantity and the source in the form the destination requires. For this salt that means the words “calcium L-threonate”, not a generic “calcium”, and the calcium figure that the serving actually delivers. A claim about calcium is reviewed against the conditions attached to it in the destination market; a claim about the threonate anion is a separate question and is not created by the calcium declaration. No disease-related claim is made for this ingredient. Structure/function wording and any permitted calcium claim are checked by the brand's regulatory reviewer for the product, the dose and the market. A claim cannot be derived from a certificate, and changing the claim does not change the specification. A label that says “calcium” without naming the salt has hidden the ingredient the buyer selected. ## The document set A working file for calcium L-threonate contains the following, each with its version or lot reference: - Specification with the revision number, the salt name, CAS number and hydrate state. - Certificate of analysis for the lot, with the assay and calcium basis and the contaminant results. - Technical data sheet and safety data sheet. - Allergen, GMO, country-of-origin and residual-solvent statements. - Heavy-metal and microbiology results, and the finished-product calculation. - Packaging statement, retained-sample record and change-control procedure. - The destination route note prepared by the buyer's regulatory team. Where a statement is not held for the lot, the gap should be named before the order, not discovered at the port. The supplier keeps the source, process and pack under change control; the buyer keeps the route note and the label approval with the order. ## Checklist before the first order - Specification version, CAS number, L-form and hydrate state are named. - COA, TDS, SDS, allergen, GMO, origin and residual-solvent statements are on file. - The assay and calcium bases match, and the loss on drying is reported beside them. - The contaminant results are converted to the finished-product serving. - The label and the claim have been reviewed for the destination. - The source, process and pack are under change control. The catalog specification is on the product hub; the certificate is explained on the COA page; the identity evidence is on the identity page; the salt comparison is on the grade page; the analytical methods behind the file are in the methods library; the release file is described on the quality page. ### 06 How we prove a calcium L-threonate lot is the threonate URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-l-threonate/identity/ Reviewed: 2026-11-19 A calcium L-threonate lot is the named salt when four lines agree: the document names calcium L-threonate and CAS 70753-61-6, infrared and HPLC identity match the reference, the calcium titration lands at 12.0–13.5%, and the water figure closes the mass balance. Calcium alone proves the element, not the counter-ion; a carbonate or a citrate can pass a calcium figure. The threonate identity is the line that separates them. In one lineCalcium alone cannot prove the salt: the threonate identity, the calcium-to-salt ratio and the water figure have to agree. ## Four separate identity questions A document can carry the correct name and still not prove the powder. Each row below is a separate question with its own evidence, and an answer to the first row alone describes the label rather than the material. Four identity questions for calcium L-threonate | Check | Question | Technique | What it establishes | Document | Is the salt named? | Name, CAS number, formula | Paperwork only | Counter-ion | Is the anion threonate? | Infrared spectrum and HPLC retention | The salt family | Element | Is the calcium figure consistent? | Complexometric titration | The calcium content | Mass balance | Dilution or water? | Assay, loss on drying, impurities | Whether the figures add up ## Infrared and HPLC: proving the threonate Infrared spectroscopy reads the threonate fingerprint and compares it with a reference spectrum. HPLC retention confirms that the peak in the sample appears at the same time as the standard under the same method. Both tests are needed: a single retention time can belong to another organic salt, and an infrared match without a chromatographic check has not shown the separation. Ask for the spectrum and the chromatogram, not only a “conforms” line. The method should name the sample preparation, the column, the mobile phase and the detector, because a calcium salt has no useful ultraviolet chromophore of its own and the detection mode matters. A certificate that reports an assay percentage with no method has left the reader unable to repeat or challenge the result. Neither infrared nor an achiral HPLC method distinguishes the L-isomer from the D-isomer. The L-configuration is fixed by the manufacturing route, and a label that names it should be supported by optical rotation or a chiral method with a stated reference. That is an additional test, not a routine release line. ## The calcium-to-salt ratio The formula C8H14CaO10 has a molecular weight of about 310.27, and calcium accounts for 40.08 of it. The theoretical calcium content of the anhydrous salt is 40.08 ÷ 310.27 = 12.92%. The catalog window of 12.0–13.5% is drawn around that figure, and the salt assay window is 98.0–102.0%. The two numbers constrain each other. A lot near 12.9% calcium and 100% assay is consistent with the pure salt. A calcium figure well above the window points to a salt with a lighter counter-ion or a higher calcium load, such as calcium citrate at 21–22% or calcium carbonate at about 40%. A calcium figure at the bottom of the window points to water, a dilution or a different hydrate. A blend can be tuned to land inside the calcium range, which is why the threonate identity and the water figure are read with the ratio rather than after it. The magnesium salt is a separate check. Magnesium L-threonate carries 7.2–8.3% magnesium and no calcium; a lot offered as calcium L-threonate should not show a magnesium figure at that level. The two products share the threonate anion and nothing else that matters for the label. ## X-ray diffraction and the solid state Diffraction looks at the crystal lattice rather than the chemistry: does the solid give a pattern, and does that pattern match a reference? A crystalline calcium salt can be separated from an amorphous diluent, two sources can be compared and a crystalline second phase can be seen above the detection limit. The technique is not a purity assay and does not quantify the counter-ion by itself. Before accepting a “match”, ask which reference pattern was used and what the detection limit was. A diffraction pattern compared with an unnamed reference proves only that the laboratory had a pattern. For a disputed lot, XRD plus infrared plus calcium plus water is stronger than any one of them, but XRD remains an investigative tool here, not a release test on the routine panel. ## What substitution looks like Common calcium L-threonate substitutions and the signals | Substitute | Effect on the lot | What shows up | Check | Calcium carbonate | Raises calcium to about 40%; reacts with acid | Calcium high; effervescence; no threonate spectrum | Calcium titration, infrared, acid test | Calcium citrate | Raises calcium to 21–22%; different anion | Calcium high; citrate reaction; infrared mismatch | Calcium titration, infrared, citrate test | Calcium gluconate or lactate | Lowers calcium to about 9% or 13% | Calcium low; different infrared fingerprint | Calcium titration, infrared | Maltodextrin or water | Dilutes the salt; raises loss on drying | Assay low; calcium low; water high | Mass balance, loss on drying | Magnesium L-threonate | Replaces calcium with magnesium | Magnesium present; calcium absent or low | Magnesium test, calcium titration | D- or DL-threonate | Same anion chemistry, different configuration | Infrared and achiral HPLC match | Optical rotation, chiral HPLC Colour is the weakest signal. A white powder is easy to match with another white powder, and a small amount of a different salt may not change the appearance at all. The calcium figure, the infrared fingerprint and the mass balance carry more weight. A certificate that gives appearance and calcium without an identity test leaves the most plausible substitution unexamined. ## How to write the identity into the specification - “Calcium L-threonate (L-threonic acid calcium salt), CAS 70753-61-6, C8H14CaO10.” - “Assay 98.0–102.0% by HPLC; state the basis.” - “Calcium 12.0–13.5% by complexometric titration; state the basis.” - “Identification by infrared spectrum and HPLC retention; report the spectra.” - “Loss on drying ≤6.0%; name the hydrate state.” - “L-configuration controlled by the route; optical rotation or chiral method on request.” - “No magnesium L-threonate and no other calcium salt above the agreed limit.” ## Five questions for the supplier - What exactly is in the drum: which hydrate, which L-form, and which CAS number does the certificate carry? - Can you provide the infrared spectrum and the HPLC chromatogram, not only the assay percentage? - What are the calcium result, the assay basis and the loss on drying for this lot? - How is the L-configuration controlled, and what optical rotation or chiral result is on file? - If the lot is disputed, will you accept a joint re-test on the retained sample? Five direct answers amount to an identity file. A single calcium percentage does not. Catalog figures sit on the calcium L-threonate product page; the COA page maps each figure to a certificate line; the grade page widens the comparison to other salts; the magnesium L-threonate page covers the other mineral salt. The methods library and the quality page explain how the tests are run and how a lot is released. ### 01 What the COA for calcium lactate actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-lactate/coa/ Reviewed: 2026-11-19 The certificate for a calcium lactate lot reports calcium by complexometric titration, lactate identity by HPLC and IR, water by Karl Fischer, the heavy-metal panel and microbiology. The assay carries a basis, and on a pentahydrate that basis decides whether the percentage can be right at all. Read the calcium and the water together: the pair locates the hydrate, and neither number means much on its own. In one lineA calcium figure without a water figure is half a certificate: on a pentahydrate the two numbers describe the same hydrate from opposite ends. ## The certificate as a test report Each line has to answer three questions: what was measured, by which method, and against which limit the lot was released. A row that reads “conforms” offers a conclusion without the evidence behind it. The table below is the catalog specification, not a batch result; the batch certificate is the document that turns it into a lot. Identification is three checks sharing one row. The infrared spectrum compares the solid with a reference, the HPLC retention confirms the lactate anion, and the calcium reaction — a white precipitate with ammonium oxalate that dissolves in dilute hydrochloric acid and not in acetic acid — confirms the cation. An IR match alone has confirmed the salt in general terms, not the calcium in particular. Release parameters for calcium lactate pentahydrate | Parameter | Method | Release limit | Appearance | Visual | White, free-flowing crystalline powder | Identification | IR; HPLC for lactate; calcium by the oxalate reaction | Conforms to the reference | Assay, dried basis | Complexometric titration | 98.0–101.0% | Calcium | Complexometric titration | 13.0–14.0% | Water | Karl Fischer | 22.0–27.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh ## Dried basis, as-is calcium and the water figure The first question about the assay is not its value but its basis. At 25.0% water the powder is three-quarters dry matter, so no lot at that water level can be more than about 75% calcium lactate as-is, whatever the titration says on a dried basis. A 98.0% result therefore describes the dry matter. Without the basis the reader cannot tell which powder the percentage refers to, and those are different materials. Calcium is the as-is figure and the one the label arithmetic uses. It follows from the other two: calcium = assay × (100 − water) ÷ 100 × 0.1837. A lot at 98.5% on the dried basis with 25.4% water carries 0.985 × 0.746 × 18.37 = 13.50% calcium, inside the 13.0–14.0% window. Run the same sum backwards, at 13.0% calcium and 23.0% water, and the implied assay is about 92%, outside the window. The three figures have to agree, and when they do not, one of them is wrong. Water by Karl Fischer measures water directly. An oven loss measures mass, and a low drying temperature can leave part of the crystal water in the sample, so the certificate should name the method rather than print a single word such as moisture. For a hydrate the distinction matters: this water is part of the crystal, not contamination sitting on it. ## Release limit versus batch result The release limit is the boundary the lot was accepted against; the batch result is what the laboratory measured. Both belong on the page in separate columns, with the method beside them. A result column that repeats the range describes the gate rather than the lot, and a buyer can neither trend it nor compare it with the next delivery. What the result column should show | Parameter | Release limit | Result column | Assay, dried basis | 98.0–101.0% | A measured percentage, with the basis named | Calcium | 13.0–14.0% | A measured percentage, as-is | Water | 22.0–27.0% | A measured percentage by Karl Fischer | Heavy metals | Per element | A figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot | Particle size | ≥95% through 40 mesh | The percentage measured through the sieve A single total for heavy metals hides the element that matters, and a microbiology line that says “within limits” hides the count. A useful certificate needs no follow-up question. ## What moves between batches Water is the most mobile figure. It responds to the drying step, to the humidity at packing and to the surface area of the powder, and the calcium result follows it because the dry matter is what carries the calcium. A drift in water with a stable dried-basis assay is a drying and packing change; a drift in both the water and the dried-basis assay is a purity change, and it deserves a different conversation. The mesh result moves with the mill and the sieve, and a granulated lot has a different bulk density and flow from a 40 mesh powder even when the chemistry is identical. Colour is the least quantitative line: a cream tint can come from the drying step rather than from contamination, so read the batch record before rejecting on colour. Residual fermentation acids and traces of an earlier product on a shared line are the impurities a heavy-metal panel will not catch. Ask which organic acids were tested and at what limit, and for a neutralised material, which calcium source was used and what the acid-insoluble residue is. ## When to order an outside test Independent testing earns its place for a new source, a first shipment into a regulated market, a hydrate claim the certificate does not prove, or a result in dispute. The useful panel is narrower than a full repeat: calcium by titration, water by Karl Fischer, lactate by HPLC against a reference standard, heavy metals by ICP-MS, and microbiology. Add X-ray diffraction when the question is whether the solid is the pentahydrate, and optical rotation if the lactate isomer matters to the file. Ask for the limit of detection beside every screen: not detected is a statement about the method until the limit is printed next to it. Chain of custody is the other half, and a referee should receive the specification as well as the powder. ## What to compare between suppliers Six lines settle most comparisons: the form and its CAS number; the assay with its basis; the calcium and water pair; the mesh and bulk density; the contaminant results; and the pack with its lot code. Two quotations that agree on assay but differ on the basis or the hydrate are not describing the same powder, and a comparison that ignores water will rank a drier lot above a purer one. The catalog limits sit on the calcium lactate product page. The tests that separate the hydrate from the anhydrous salt are set out on the identity page, the mass arithmetic is on the pentahydrate versus anhydrous page, and the titration itself is described in the complexometric method note. Release practice sits on the quality page. ### 02 Calcium lactate grades: the hydrate, the mesh and the pack URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-lactate/grades/ Reviewed: 2026-11-19 Calcium lactate is supplied as the pentahydrate powder at 40 mesh, and that is the grade the catalog describes. An anhydrous grade carries about 18.4% calcium against 13.0% and removes the water of crystallisation, which matters when the powder mass per serve is the constraint. Mesh, granulation and the grade paper are separate choices, and they are settled after the hydrate. In one lineThe grade question is the hydrate first and the particle size second: the mesh changes how the powder flows, while the hydrate changes how much calcium each gram carries. ## Why the form comes before the grade Calcium lactate crystallises from water as the pentahydrate, and that is the form most food and supplement specifications describe. The anhydrous salt is made by driving the crystal water off; it is a different specification with a different CAS number and a different calcium figure per gram, not a drier version of the same bag. Two suppliers can both quote “calcium lactate 99%” and be selling powders that differ by 41% in calcium per gram, so the form has to be fixed before the mesh or the pack. Grade words are used loosely in the trade. A food grade usually points to an additive monograph such as the one behind E 327; a supplement grade points to a specification written for a dietary ingredient; technical is a different material with different impurity limits. The useful question is not which word is printed on the drum but which specification and which market the buyer is working to. ## Pentahydrate and anhydrous side by side Calcium lactate pentahydrate and the anhydrous salt | Property | Pentahydrate | Anhydrous | Formula | C6H10CaO6·5H2O | C6H10CaO6 | CAS number | 5743-47-5 | 814-80-2 | Molecular weight | 308.29 | 218.22 | Calcium, theoretical | 13.0% | 18.4% | Water of crystallisation | 29.2% | None | Powder per gram of calcium | 7.69 g | 5.43 g | Behaviour in humid air | Surface moisture and caking | Takes up water and rehydrates | Typical use | Tablets, capsules, sticks, liquids | Compact tablets, dry blends The last three rows are the ones a purchasing decision turns on. The hydrate is the heavier powder for the same calcium, and it is the more forgiving one to store. The anhydrous salt buys mass back and asks for a dry handling line in return. ## Solubility, taste and flow Both forms dissolve in water, and the solution is neutral to slightly alkaline with a mild saline note that grows with the dose. Lactate is among the more soluble calcium salts used in supplements, which is why it appears in ready-to-drink formats and sticks where calcium citrate would leave a sediment. Once dissolved, the two forms give the same calcium and lactate ions: the difference is in the powder, not in the solution. The pentahydrate is the easier powder. It flows at 40 mesh, it is not strongly hygroscopic, and it holds its crystal water in a normal store. The anhydrous salt is hygroscopic: opened to humid air it takes water back, and a lot that has picked up water weighs more, carries less calcium per gram and can cake in the hopper. That is a handling penalty rather than a purity failure, but it has to be planned for. Granulation is available on request. A granulated lot flows better and makes less dust, but it gives a coarser particle size and a slower dissolution in a stick. It is a separate specification, not a packing option, and it should be named before the order rather than after the trial. ## What the form does to the fill A 200 mg calcium claim needs 1,538 mg of pentahydrate at 13.0% or 1,087 mg of the anhydrous salt at 18.4%. In a 600 mg capsule that is three capsules of the hydrate against two of the anhydrous; at 500 mg of calcium it is 3.85 g against 2.72 g, which decides whether the product is a single tablet or a two-tablet serving. The arithmetic is set out in full on the pentahydrate versus anhydrous page. The same logic runs through a stick. For a fixed sachet weight the hydrate fills more of the pack for the same claim, so the denser form either raises the calcium or leaves room for flavour and acid. What it does not do is make the powder stronger in any chemical sense: the calcium per molecule is unchanged. ## What to write into the specification - “Calcium lactate pentahydrate, CAS 5743-47-5, C6H10CaO6·5H2O.” - “Assay 98.0–101.0% on the dried basis by complexometric titration; water 22.0–27.0% by Karl Fischer.” - “Calcium 13.0–14.0% as-is.” - “Identification by IR and by HPLC for lactate; calcium confirmed by the oxalate reaction.” - “≥95% through 40 mesh; Pb ≤3, As ≤2, Cd ≤1, Hg ≤0.1 mg/kg.” - “No anhydrous salt, calcium carbonate or other calcium source added.” The exclusion clause is not decoration. A blend of the pentahydrate with a denser calcium salt can be made to land inside the calcium window, and the clause plus the water figure is what catches it: the calcium rises while the water falls. ## When the other form is the wrong choice If the specification or the customer names the pentahydrate, the anhydrous salt is not a substitution, even though it is the same molecule once dissolved: the declared ingredient and the weighed ingredient would differ. If the plant is humid and the powder is weighed by hand, the hygroscopic form is the harder material to control, and a caked lot can lose more in rejected batches than the mass it saves. The reverse holds too. A buyer who needs a compact tablet or a dry blend with a low powder mass should not accept the pentahydrate and correct the dose afterwards; the fill weight and the tablet size are set before the blend is written. The catalog here is the pentahydrate at 40 mesh, and the anhydrous grade is a separate purchase with its own certificate. The product hub carries the catalog limits; the COA page shows how the hydrate and the water are reported; the compliance page covers the two EU routes. The nearest alternative salts are set out on the calcium carbonate and calcium gluconate pages, where the calcium figure per gram is 39–41% and 8.5–9.5% respectively. ### 02.1 Pentahydrate or anhydrous: the calcium figure and the fill weight URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-lactate/grades/pentahydrate-vs-anhydrous/ Reviewed: 2026-11-19 Calcium lactate pentahydrate is 13.0% calcium and the anhydrous salt is about 18.4%, so one gram of the anhydrous form does the work of about 1.41 g of the hydrate. At a 200 mg calcium claim that is 1,087 mg against 1,538 mg, a difference of about 450 mg in every capsule, tablet or stick. The calcium figure is the whole argument: the two powders are the same salt, and the water of crystallisation is what stands between them. In one lineThe hydrate and the anhydrous salt carry the same calcium per molecule, so the only real difference is how much water travels with each gram, and every fill weight follows from that. ## Two forms, one salt Calcium lactate is the calcium salt of lactic acid: one calcium ion to two lactate ions. The pentahydrate holds five water molecules in the crystal and the anhydrous salt holds none, which gives molecular weights of 308.29 and 218.22. The difference, 90.07, is exactly five waters. That water is 29.2% of the pentahydrate by mass, and it sits in the lattice rather than on the surface. It becomes free water only when the crystal dissolves, so a dry pentahydrate does not feel damp. It is not a wet powder; it is a heavy one. ## Where the calcium figure comes from The calcium figure is fixed by the formula and diluted by the water. In the anhydrous salt, 40.08 of 218.22 mass units are calcium, which is 18.37%. Add five waters and the same calcium is spread over 308.29 units, which gives 13.00%. The ratio between the two figures, 1.41, is the ratio of the molecular weights, and it holds for any lot that is really the form it claims. On a certificate the pair of figures locates the lot. A 99.0% dried-basis assay with 25.0% water gives 0.99 × 0.75 × 18.37 = 13.64% calcium, and 13.6% calcium with 26.0% water implies an assay of about 100%. Run that sum before recalculating a fill weight: three figures that do not reconcile are describing a different powder. Calcium in one gram of powder | Form | Calcium per gram | Powder for one gram of calcium | Pentahydrate at 13.0% | 130 mg | 7.69 g | Anhydrous at 18.4% | 184 mg | 5.43 g | Anhydrous against pentahydrate | 54 mg more, about 41% | 2.26 g less, about 29% ## The fill weight follows the claim The fill weight is the label claim divided by the calcium fraction of the form in the drum. The table runs the sum for the usual calcium claims, using theoretical figures rather than a batch result. Round once at the end, and use the lot's own calcium figure for the batch record. Fill weight for a calcium claim | Calcium claim | Pentahydrate at 13.0% | Anhydrous at 18.4% | 100 mg | 769 mg | 543 mg | 200 mg | 1,538 mg | 1,087 mg | 500 mg | 3,846 mg | 2,717 mg | 800 mg, the EU reference intake | 6,154 mg | 4,348 mg Read it the other way as well. A 1,000 mg scoop of pentahydrate delivers 130 mg of calcium, and the same scoop of the anhydrous salt delivers 184 mg. Keep the scoop, change the hydrate, and the dose has moved by 41% without touching the label. ## Capsules, tablets and the unit count A size 00 capsule holds roughly 500–700 mg of a mineral powder, so a 200 mg calcium claim is three capsules of the hydrate at about 513 mg each, or two of the anhydrous salt at about 544 mg each. The dense form saves a capsule; the hydrate needs a third one or a larger shell. At 500 mg of calcium the hydrate is 3.85 g, beyond a single swallowable tablet for most consumers, and the anhydrous salt is 2.72 g, a large tablet but a practical two-tablet serving. At 100 mg the anhydrous salt is a 543 mg tablet against 769 mg: smaller, not stronger. ## Sticks, water and the handling line Sticks and drinks are where the mass shows most. A 5 g stick of the hydrate carries 650 mg of calcium; the same stick of the anhydrous salt carries 920 mg. At a 200 mg claim the hydrate takes 1.54 g of the stick and leaves 3.46 g for flavour, sweetener and acid, while the anhydrous salt takes 1.09 g and leaves 3.91 g. That extra room is why a high-calcium stick is usually built on a denser salt. One caution about the water. The 29.2% in the hydrate is bound in the lattice, so it does not raise the water activity of the powder and it does not make the stick damp. It joins the drink only when the powder dissolves, and 450 mg of water in a 200 mL serve is not measurable there. The reason to prefer the anhydrous form in a stick is mass and flow, not moisture. The anhydrous salt is hygroscopic: an open drum in a humid plant gains water, and a lot that has gained water carries less calcium per gram than its certificate says. Weigh it from a sealed container and record the water figure at receipt. ## What the label declares In the European Union a food supplement declares calcium from the permitted sources in Annex II to Directive 2002/46/EC, in milligrams and as a percentage of the 800 mg reference intake in Annex XIII to Regulation (EU) No 1169/2011. In the United States the Supplement Facts panel declares elemental calcium against a 1,300 mg Daily Value, and the ingredient list names the salt. The ingredient list reads “calcium lactate” for either hydrate, so the hydrate lives in the specification rather than in the ingredient name. That is why the switch is easy to make by accident. The declared calcium is the anchor: 200 mg on the panel means 200 mg from the weighed powder, and that powder moves by 41% with the form. If the specification names the pentahydrate, an anhydrous lot is a change of ingredient rather than a change of supplier. The declaration, the fill weight and the batch record move together, and the change belongs in written change control. ## Choosing one form for a product Choose the pentahydrate when the specification or the market file names it, when the plant handles powder in humid air, and when the fill has room for the mass. It is the form the catalog describes, at 40 mesh. Choose the anhydrous salt when the calcium claim is high and the unit is small: a two-capsule serving, a compact tablet, a high-calcium stick. It buys mass and unit count, and it asks for a sealed, dry handling line and a water check at receipt. The product hub carries the catalog limits; the grades page places this comparison in the wider range; the COA page shows how the calcium and the water are reported; the calcium carbonate page covers the densest common calcium salt; the compliance page covers the label rules. ### 03 Calcium lactate stability: water, caking and the pack URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-lactate/stability/ Reviewed: 2026-11-19 Calcium lactate is a stable salt in a sealed pack: the assay does not decay at warehouse temperature, and the failures that matter are physical. Water moves — off the crystal in a warm, dry store and onto the surface in a humid one — and caking follows. In solution the limits are microbial growth, pH and competing anions, not the lactate itself. In one lineThe assay is the least interesting number on a calcium lactate stability file: water is the figure that moves, and on a hydrate the water figure is the stability result. ## The dry powder: crystal water and surface water A sealed foil pouch or a lined drum at 15–25 °C keeps calcium lactate pentahydrate for years, and the calcium figure changes only as far as the water does. The pentahydrate is mildly efflorescent, so a warm, very dry store can pull water off the crystal over time and lift the calcium figure per gram. A humid store does the opposite: it adds surface moisture on the particles, and that is what turns a free-flowing 40 mesh powder into a caked one. Caking is a surface effect rather than a bulk one. A light, dusty lot has more surface per gram than a granulated one and picks up moisture faster; pallet pressure and temperature cycling do the rest. The control is the pack rather than the specification: a closed liner, a dry floor and a reseal after opening. Heat works through the same route. A trailer roof in summer can reach 50 °C, and a lot that has been through that will show it in the water figure before it shows it in the assay. A water and appearance check on arrival is sensible insurance for a first shipment. ## In solution and in a drink Calcium lactate dissolves readily, and the solution is neutral to slightly alkaline. Once the salt is in water it is no longer the limiting factor: the lactate is a carbon source, and an unpreserved solution is a growth medium. A liquid supplement or a drink needs a preservation step and a microbial test, and a bulk solution held across a shift needs a hold-time study rather than an assumption. pH moves the chemistry. In an acidic drink the lactate is protonated to lactic acid and the calcium stays soluble; there is no gas, because there is no carbonate to release carbon dioxide. That is the practical difference from calcium carbonate in the same matrix. At higher pH the picture changes, and a formula that also carries phosphate or sulfate can lose calcium as an insoluble salt, because calcium phosphate and calcium sulfate are both sparingly soluble. The lactate taste is mild and saline and grows with the dose. In a stick it is usually carried by a fruit flavour; in a clear drink it can read as a faint dairy note. Taste is a formulation variable rather than a stability one, but it decides how much calcium a serve can carry. ## What actually moves the material What moves calcium lactate in storage and in formula | Factor | Effect | Control | Relative humidity | Surface moisture, caking, flow loss | Sealed liner; dry store; reseal opened packs | Sustained heat | Surface dehydration; the water figure falls | Controlled store; check the transport leg | Water in solution | Microbial growth; pH drift | Preservation, hold-time study, microbial test | Acid | Lactate protonated; no gas evolved | Trial the acidulant and the pH | Phosphate or sulfate | Calcium salt precipitates; cloud | Check the formula for competing anions | Compression | Capping, lamination, density change | Set the tablet force and the lubricant | Packaging | Moisture and odour ingress | Foil pouch, lined drum, intact seal The first two rows are storage, the next three are formula, and the last two are process and packaging. A failure usually belongs to one group, and the group tells you which file to open. ## A stability protocol for the ingredient Two conditions and the marketed pack are enough for a workable protocol. Long-term storage at 25 °C and 60% relative humidity, accelerated storage at 40 °C and 75% relative humidity, and, for a hot and humid destination, an intermediate condition at 30 °C and 65% relative humidity. Timepoints at 0, 3, 6, 12 and 24 months cover the usual retest period. Test calcium by titration, water by Karl Fischer, assay on the dried basis, appearance, mesh and bulk density, microbiology and the heavy-metal panel at each point. Water and appearance are the two that move first, and a protocol written around assay alone would miss both. The report should show the results rather than a pass statement, and it should name the pack and the lot family. Use the pack that will be sold. A 1 kg foil pouch and a 25 kg fiber drum differ in headspace, in the number of times they are opened and in the moisture path through the closure, so a result from one does not transfer to the other. ## The finished formula changes the answer In a tablet, the compression force and the lubricant decide capping and disintegration, and a dense granulated lot may need a different force from a light 40 mesh powder. In a capsule, the excipients can pull water into the fill even when the calcium lactate is dry. In a stick, the acidulant and the flavour set the pH, and the flow of the powder decides whether the fill weight stays inside tolerance across a run. A gummy is the hardest matrix: water activity, pH and the cook temperature all act on the salt, and calcium lactate is soluble enough to stay in solution and then crystallise on the surface if the water activity falls. A suspension needs a thickener and a settling test. In every one of these the bulk stability of the ingredient is the starting point, not the answer. ## How the shelf life is assigned We do not publish one shelf-life figure for calcium lactate, because the pack and the storage condition set it. A sealed pouch or a lined drum commonly carries a 24-month retest period, and the period written on the specification is the number that matters, supported by the file for that pack. An opened pack has a shorter working life and should be labelled with the date it was opened. After the retest period, re-assay the retained sample before extending use, and do not carry a drum's figure across to a repacked container. The product hub lists the packs; the COA page covers the release tests; the hydrate comparison explains the water arithmetic; the method notes describe the tests; the quality page describes the release file. ### 04 Calcium lactate: MOQ, packs and the ordering file URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-lactate/moq/ Reviewed: 2026-11-19 The minimum order for calcium lactate is 1 kg, in a foil pouch; the production pack is a 25 kg fiber drum, and the standard lead time is 1–7 days from order confirmation. A firm quotation needs six details: the hydrate and CAS number, the specification with its basis, the quantity and pack, the destination and Incoterm, the documents, and the market the material is going into. In one lineOne kilogram is the smallest pack we can sample, test and trace as a lot, and the 25 kg drum is the same material at production scale. ## Why the minimum is 1 kg A 1 kg pack covers a bench trial, a retained sample and an independent identity test, and it ships as a parcel without a pallet. It is also a commercial unit with a lot code, which a scoop from a drum is not: the sample, the certificate and the invoice can be tied to one pack. Below 1 kg the material is split from a larger lot and repacked. That adds handling, breaks the pack identity and makes a dispute harder to settle, without changing the chemistry. The 25 kg drum is the bulk unit: fewer handlings per kilogram, but it commits inventory and a longer storage period, which matters for a hygroscopic material or a short project. The pack should match the consumption rate as well. A plant that takes 20 kg a week should buy the drum and plan the opening dates; a bench that takes 50 g a week should buy the pouch and check the water figure each time it is opened, because the powder meets humid air on every opening. ## Packs and formats Standard calcium lactate packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Different particle profile and bulk density | Split pack | Below 1 kg, on request | Bench trial | Repacked from a lot; documented as such The catalog form is a 40 mesh powder: ≥95% through 40 mesh. Granulation is a different specification rather than a packing choice, because it moves the particle-size line, the bulk density and the dissolution behaviour in a stick. If the fill line needs a coarser powder, say so before the quotation. ## Lead time and dispatch The 1–7 day window covers picking, document preparation and dispatch. It does not include transit, customs clearance or the customer's own quality release, and a custom granulation or a non-standard pack adds time that the quotation states separately. Ask for the dispatch date as well as the lead time. A 1 kg pouch travels as a parcel and a 25 kg drum as a pallet; the Incoterm decides who books the freight and who clears the entry. The documents should travel with the lot rather than follow it. ## What a quotation needs Six items make a quotation firm enough to compare: - Product and hydrate. Calcium lactate pentahydrate, CAS 5743-47-5, with the hydrate written out. - Specification. Assay basis, calcium, water, mesh, heavy metals and microbiology. - Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated or split variant. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, specification, SDS, and any statement the importer needs. - Intended use and market. Supplement, food or another use, and where it will be sold. A quotation without the hydrate or the market is incomplete. The same powder can suit one destination and sit outside the file for another, and the paperwork is part of the offer. Commercial terms are stated on the quotation. ## The sample is a lot, not a demonstration The 1 kg pack is the qualification sample. Test identity, calcium, water and microbiology before scaling, and keep a retained sample from the same pack. The lot code on the sample, the COA and the quotation should match; a sample that cannot be traced to a lot is a demonstration. If the bench trial needs less than a kilogram, discuss it before ordering. A split pack is a repack with its own traceability rather than the catalog pack, and a bench sample and the production drum will not necessarily come from the same lot. ## Terms to settle before the first order The quotation sets the commercial terms, the Incoterm, the pack, the lead time and the documents. The quality terms belong beside them: the specification revision, the COA per lot, the retained sample, the retest period and the change-control route. The agreement should also say how much notice a change of source, process, mesh or pack gets before the next shipment, and who signs it off. Returns follow the quotation and the quality agreement. A lot that fails the agreed specification should go through the retained sample and a joint re-test, not a photograph of the powder. Ask who pays for the referee test and which laboratory both sides accept. The product hub carries the catalog specification; the COA page lists the release tests; the compliance page covers the market files; the MOQ glossary entry defines the term; the logistics page covers shipping and documents. ### 05 The regulatory file for calcium lactate URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-lactate/compliance/ Reviewed: 2026-11-19 Calcium lactate reaches a finished product by two different routes, and the file has to name the one that applies. In the European Union the material can fall under the food-additive entry E 327 or under the food-supplement rules for calcium sources; in the United States it is a dietary ingredient or a food ingredient, and the label question follows from which. The buyer's regulatory team confirms the route for the destination, and this page lists the documents and checks that file needs. In one lineCalcium lactate stands at a junction of two EU routes, the additive entry and the calcium-source list, and the buyer's regulatory team confirms which one covers the drum and the label. ## What the file contains A complete file answers four questions: which material and which specification version, which lot and what its certificate reports, which limits and label rules apply to the finished product, and what changes if the source, the process or the pack changes. The certificate answers the lot, the technical data sheet answers the specification, and the safety data sheet answers handling. None of them answers the route on its own. The file should also carry the allergen and GMO statements, the origin record, the residual-solvent statement, the particle-size and bulk-density data, and a food-contact declaration for the pack. Where a statement is not available, name the gap before the order rather than discovering it at the port. A document list with version numbers beats a folder of undated files. ## European Union The additive route runs through Regulation (EC) No 1333/2008 on food additives and the specifications in Commission Regulation (EU) No 231/2012, where the entry for calcium lactate, E 327, sets its own assay and impurity figures. That specification is a different gate from the catalog range on this page: a lot can meet the catalog and still need the additive limits confirmed. The supplement route runs through Directive 2002/46/EC, whose Annex II lists the calcium sources that may be used in food supplements and refers to purity criteria for them. Labelling follows Regulation (EU) No 1169/2011, with calcium declared in milligrams and as a percentage of the 800 mg reference intake in Annex XIII. Contaminants follow Regulation (EU) 2023/915, read in its current consolidated text. Which route covers a given drum is a question about the finished product and the market, not about the powder alone. A supplement maker and a beverage maker can buy the same lot under different rules, so the buyer's regulatory team confirms the route as of this review, because the entries and their conditions change. ## United States The first question is whether the material is a dietary ingredient in a supplement or an ingredient in conventional food. For a supplement, the Supplement Facts panel declares elemental calcium against a 1,300 mg Daily Value, and the ingredient list names calcium lactate; 21 CFR 101.36 is the labelling reference. For a conventional food, the ingredient has to be used in a way that is consistent with its regulatory status, and the buyer's team confirms the basis and keeps the evidence in the file. The label and any claim are reviewed separately from the certificate. A certificate does not approve a claim, and a claim does not change the specification. ## Contaminants and limits The contaminant panel is a finished-product calculation as well as a drum result. The catalog limits are the starting point; the destination text and the daily dose decide the final limit, and the file should show both so a reviewer can see the conversion. Catalog limits and what the destination file adds | Parameter | Catalog limit | What the file adds | Lead (Pb) | ≤3 mg/kg | The lot result, the method and the finished-product calculation | Arsenic (As) | ≤2 mg/kg | The agreed limit and the method, stated on the certificate | Cadmium (Cd) | ≤1 mg/kg | The lot result and any category exception that applies | Mercury (Hg) | ≤0.1 mg/kg | The lot result and the method | Water | 22.0–27.0% | The hydrate figure the certificate must pair with the calcium result For an additive grade, the E 327 entry is read in place of the catalog window rather than on top of it. Two sets of figures on one certificate invite the reader to pick the kinder one, so the file should state which specification the lot was released against. ## Claims and the label A nutrition claim about calcium has conditions attached. Under Regulation (EC) No 1924/2006 and its annex, a claim that a product is a source of calcium needs at least 15% of the 800 mg reference intake in the portion offered, and a high-calcium claim needs 30%; for a food supplement the portion is the daily dose. Check the numbers against the fill weight, because a 200 mg calcium serve is 25% of the reference intake and sits between the two thresholds, as the rules stand at this review. No disease-related claim belongs on the pack or in the file. The claim review is the brand's, and it applies to the finished product, the dose and the market rather than to the raw material. In the United States the same split holds: the Supplement Facts panel is a declaration, and a statement about the product's effect is a separate regulatory question. ## Documents the file needs A first shipment usually needs the specification, the batch COA, the technical data sheet, the safety data sheet, an allergen statement, a GMO statement, a country-of-origin statement, a residual-solvent statement, a statement on animal-derived inputs for the BSE and TSE file, a food-contact declaration for the pack under Regulation (EC) No 1935/2004, and any halal or kosher certificate the market asks for. Each document should carry a version, a date and the product name with its hydrate. A specification that says only “calcium lactate” is ambiguous between the pentahydrate and the anhydrous salt, and that ambiguity is a common reason a file stalls in review. ## Checklist before the first order - Specification version, CAS number and the hydrate are named. - The route for the destination is confirmed by the buyer's regulatory team. - COA, specification, SDS, allergen, GMO and origin statements are on file. - The contaminant results are converted to the finished-product dose. - The label and the claim have been reviewed for the market and the dose. - The source, process, mesh and pack are under change control. The product hub carries the catalog specification; the COA page explains the lot certificate; the hydrate comparison covers the mass and label arithmetic. The quality page describes the release file, and the EU regulatory note gives the framework references. ### 06 How we prove a calcium lactate lot is the pentahydrate URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-lactate/identity/ Reviewed: 2026-11-19 A calcium lactate lot is what it claims when four lines agree: the calcium titration matches the stoichiometry of the salt, HPLC or IR shows lactate, Karl Fischer water matches the named hydrate, and the mass balance closes. The calcium figure alone cannot separate the pentahydrate from the anhydrous salt, from calcium carbonate, or from a blend. The water figure is what turns a calcium percentage into a hydrate. In one lineIdentity is a set of agreeing measurements: the titration says the calcium, the chromatography says the lactate, and the water says which hydrate. ## The four identity layers A certificate can name the right material and still fail to prove it. Each layer below is a separate question with its own evidence, and a supplier who answers only the first has described the paperwork rather than the powder. Four layers of calcium lactate identity | Layer | Question | Test | What it proves | Document | Is the hydrate named? | Name, CAS number, formula | Paperwork only | Calcium | Is the cation calcium, and how much? | Complexometric titration; oxalate reaction | The calcium and its quantity | Lactate | Is the anion lactate? | HPLC against a lactate standard; IR | The acid | Water | Which hydrate is it? | Karl Fischer | The hydrate state and the mass balance The titration is the layer most often over-read. It measures calcium and nothing else, so a carbonate, a citrate and a lactate can all produce a calcium figure inside the same window if the dilution is arranged. What the titration does prove is that the calcium is present in the quantity the formula predicts, and that is the half of the identity the water cannot supply. ## The ratio: one calcium to two lactates The formula fixes the ratio at one calcium ion to two lactate ions: 40.08 g of calcium to 178.14 g of lactate. That is 18.37% calcium in the anhydrous salt and 13.00% once five waters are added. A lot above 18.4% calcium cannot be calcium lactate alone; a lot below 13.0% is either diluted or carrying more water than the window allows. The water result converts to a hydrate number: n = 12.11 × water ÷ (100 − water). At 25.0% water that gives 4.0, and a full pentahydrate at 29.2% gives 5.0. The catalog window of 22.0–27.0% spans roughly 3.4 to 4.5, which is why the certificate has to be read as a pair of figures rather than as a name. The dryer removes part of the crystal water, the grade keeps the name of the fully hydrated form, and the water result reports what the lot actually carries. That is not a defect; it is the reason the water figure belongs on the certificate at all. The pair also runs as a check. Calcium on the as-is basis should equal assay × (100 − water) × 0.1837. A lot at 14.0% calcium and 27.0% water implies a dried-basis assay near 104%, which is outside the window; either the calcium or the water is wrong, or the powder is not a pentahydrate. Run the sum before accepting a certificate whose figures were not reconciled. ## X-ray diffraction and the solid state X-ray diffraction answers the solid-state question: is the powder crystalline, and does the pattern match a pentahydrate reference or an anhydrous one? The two hydrates have different unit cells, so the pattern separates them in a way a calcium titration cannot, and it also catches an amorphous dilution and compares lots from two sources. XRD is not a purity assay and it does not measure the counter-ion. Ask for the reference pattern and the detection limit before accepting a statement that the pattern matches. For a disputed lot, XRD plus calcium plus water is stronger than any one of them. ## What substitution looks like Substitutions and the signals they leave | Adulterant | What it does | Signal | Test | Anhydrous salt | Raises calcium, lowers water | Calcium above 14%, water below 22% | Karl Fischer, XRD | Calcium carbonate | Raises calcium sharply; reacts with acid | Calcium far above 14%; gas with acid | Acid test, titration, XRD | Citrate or malate | A different anion with a similar powder | HPLC retention differs; calcium differs | HPLC, IR | Sugar or maltodextrin | Dilutes the salt | Calcium and assay low together | Mass balance, HPLC | Added water | Lowers the as-is calcium | Water high, dried-basis assay normal | Karl Fischer Colour is the weakest signal: white to off-white covers the pentahydrate, the anhydrous salt and most diluents. The stronger signals are the calcium figure, the lactate retention and the water. A certificate that reports appearance and an assay percentage but not the water has left the most likely substitution untested. ## How to write identity into the specification - “Calcium lactate pentahydrate, CAS 5743-47-5, C6H10CaO6·5H2O.” - “Assay 98.0–101.0% on the dried basis by complexometric titration; calcium 13.0–14.0% as-is.” - “Water 22.0–27.0% by Karl Fischer, reported with the calcium result.” - “Identification by IR and by HPLC against a lactate standard; calcium confirmed by the oxalate reaction.” - “X-ray diffraction pattern consistent with the pentahydrate where the hydrate is disputed.” - “No anhydrous salt, calcium carbonate or other calcium source added.” ## Five questions for the supplier - Which hydrate is this lot, and what is the water result by Karl Fischer? - What is the calcium result, and on which basis is the assay reported? - Can you send the HPLC chromatogram and the IR spectrum, not only the percentages? - Do the calcium, water and assay figures reconcile on the hydrate line? - If the lot is disputed, will you accept a joint re-test on the retained sample? Five direct answers amount to an identity file; a calcium percentage does not. The product hub carries the catalog limits; the COA page shows where each figure sits on the certificate; the grades page compares the hydrates; the pentahydrate versus anhydrous page covers the mass consequences. The method notes describe the titration, the chromatography and the diffraction, and the quality page describes the release file. ### 01 Reading a calcium malate COA: calcium, malate and water URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-malate/coa/ Reviewed: 2026-11-19 A calcium malate certificate reports appearance, identification by infrared spectrum and HPLC, assay by HPLC at 98.0–102.0%, calcium by complexometric titration at 22.0–24.0%, loss on drying at not more than 2.0%, the heavy-metal panel, microbiology and particle size. The calcium and malate results are two views of the same salt, and the pair is the quickest check that the lot is the neutral salt rather than a blend. The limits below are the catalog specification; the batch COA is the document that confirms a particular pack. In one lineThe calcium figure and the malate figure have to agree: a titration near 23% calcium and an HPLC malate result are two views of one salt, and the moisture line explains the difference. ## The certificate as a test report A certificate can be audited when each row carries three things: the parameter, the method that produced the number, and the limit the lot was released against. “Conforms” is a conclusion, and it is the right answer only where the test is comparative. Calcium, malate, moisture and particle size are measured against windows, so each needs a number and a method. Release tests for calcium malate | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | Infrared spectrum and HPLC retention | Conforms to the reference | Assay (calcium malate) | HPLC | 98.0–102.0% | Calcium (Ca) | Complexometric titration | 22.0–24.0% | Loss on drying | Gravimetric | ≤2.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh ## Calcium, malate and the water in the balance The neutral salt has the formula C4H4CaO5 and a formula weight of 172.15. Calcium is 40.08 ÷ 172.15 = 23.28% of that mass, and the malate dianion is the other 76.72%. The catalog calcium window of 22.0–24.0% brackets the theoretical figure, which is what a buyer should expect from a neutral calcium malate and not from a carbonate, a citrate or a dilution. The two windows overlap but do not coincide. An assay of 98.0% corresponds to 22.8% calcium, and 102.0% corresponds to 23.75%. A certificate that reports 22.0% calcium beside 102% assay is describing two different powders, or a calculation error. Read the pair as a ratio check before accepting either figure on its own. Basis is the second arithmetic. A result reported on the dried basis is higher than the as-is result by the moisture factor: at 1.0% loss on drying, 99.0% as-is becomes 100.0% on the dried basis. The certificate should say which basis the assay uses, and the loss on drying should sit beside it as a measured figure. A range printed without a basis is not a specification a laboratory can reproduce. Name the HPLC column, mobile phase, detection mode and standard, and the titration indicator. A method described only as “HPLC” or “titration” cannot be compared between laboratories. ## Release limit versus batch result The release limit is the acceptance boundary. The batch result is what the laboratory measured on the lot. Both belong on the certificate in separate columns, with the method and the basis next to them. A result column filled with the specification range is a copy of the gate, not evidence about the powder. What the result column should contain | Parameter | Release limit | Result column | Assay | 98.0–102.0% | A measured percentage, with the basis and the HPLC method | Calcium | 22.0–24.0% | A measured percentage, with the titration method | Loss on drying | ≤2.0% | A measured percentage and the drying condition | Heavy metals | Per element | A figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot “Passes specification” is a conclusion the reader should be able to reach from the numbers. For microbiology the evidence is a count plus an absence statement; for heavy metals it is a figure per element, not a single total. A certificate that reports a sum of heavy metals has hidden the element that matters. Read calcium against assay one more time before release. Calcium high with assay low points to a calcium-rich impurity such as carbonate or oxide; calcium low with assay normal points to water or a carrier. Either pattern is a question for the supplier, not a marginal pass. ## What moves between batches The salt is made by neutralising malic acid with a calcium source, then crystallising, drying and milling. The calcium source moves residual acidity and colour; crystallisation and drying move loss on drying; milling and sieving move the particle-size result, which is a finishing specification. Calcium and loss on drying move in opposite directions when drying changes: a harder-dried lot loses surface water, so as-is calcium rises while the dried-basis assay barely moves. Show both figures so the reader can tell a moisture change from a potency change. Colour is the least quantitative line: white to off-white covers a wide window, and a cream tint can follow the calcium source while the assay passes. A trend across lots says more than one result near an edge. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a disputed salt form, or a certificate whose calcium and assay figures do not reconcile. The useful panel is targeted: calcium by complexometric titration, malate by HPLC, loss on drying, ICP-MS for the heavy-metal panel, and an acid test or X-ray diffraction if a carbonate is suspected. The acid test is simple and revealing. A few milligrams of powder in dilute acid give bubbles if a carbonate is present and no bubbles if the powder is calcium malate. It is a screening test, not a replacement for the anion assay, but it catches the simplest substitution quickly. Ask for the detection limit behind each screen; “not detected” without a limit describes the method, not the sample. The sample tested should be the retained sample, and the report should identify the lot. ## What to compare between suppliers Put six lines side by side: name, formula and CAS number; calcium result and method; assay result and basis; loss on drying; identification method; and the contaminant and microbiology panel. Two quotations that agree on calcium but differ on formula or basis are not describing the same powder. Traceability is the second layer: the certificate should name the manufacturer, the lot and the pack, and the lot code should match the pouch, the drum and the retained sample. The catalog figures are on the calcium malate product page. The tests that separate the salt from a blend are on the identity page; the grade and mesh choices are on the grade page; the destination rules are on the compliance page. The titration itself is described in the complexometric method note, and the release workflow is on the quality page. ### 02 Calcium malate grades: neutral salt, acid salt and mesh URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-malate/grades/ Reviewed: 2026-11-19 Calcium malate is sold as the neutral salt, C4H4CaO5, which carries 23.3% calcium, but the name is also used for the acid salt calcium hydrogen malate at 13.1% calcium, for hydrated or diluted powders, and for different meshes. The calcium figure and the loss on drying on the certificate identify which of these is in the drum. The label has to name the same salt that the specification describes. In one lineCalcium malate is sold by its calcium figure, and the figure separates the neutral salt from the acid salt, a hydrate and a dilution. ## One name, several compositions The neutral salt has one calcium ion for each malate dianion. Its formula is C4H4CaO5, its formula weight is 172.15, and its calcium content is 23.28%. That is the material described on this page: an anhydrous powder with a calcium window of 22.0–24.0% and a loss on drying of not more than 2.0%. Calcium hydrogen malate is a different salt. Two hydrogen malate anions balance one calcium ion, giving (C4H5O5)2Ca, a formula weight of 306.25 and a calcium content of 13.09%. It appears in the food-additive monographs as a separate entry, and it is not the neutral salt in this catalog. A quotation that promises 13% calcium is quoting that salt, a hydrate or a dilution, not the 23% material. Water and carriers move the calcium figure in the same direction. A hydrate keeps the salt name but adds mass that carries no calcium, so the figure per gram falls and the loss on drying rises. A diluted powder adds a carrier, which has to appear on the label. Granulation changes flow and dust without changing the chemistry, so it is a physical grade rather than a different salt. None of these is a purity tier. They are different powders with different arithmetic, and the certificate is where the arithmetic is checked. ## The forms side by side Calcium malate forms and what the calcium figure means | Form | Formula | Calcium | Loss on drying | What changes | Neutral calcium malate, anhydrous (catalog) | C4H4CaO5 | 23.3% theoretical; 22.0–24.0% specified | ≤2.0% | The supplement salt described here | Calcium hydrogen malate | (C4H5O5)2Ca | 13.1% theoretical | ≤2.0% in the additive entry | A different salt, label name and dose mass | Hydrated calcium malate, if offered | C4H4CaO5·nH2O | Below 23.3% | Above 2.0% | Same salt name, more mass per dose | Diluted calcium malate | Salt plus carrier | Below 22.0% | Depends on the carrier | The carrier must be declared | Granulated calcium malate | C4H4CaO5 | 22.0–24.0% | ≤2.0% | Same chemistry, better flow The first column is not a menu of equivalents. Only the neutral anhydrous salt matches the catalog specification; the other rows describe what a buyer may be offered under a similar name, and each one needs its own certificate and label check. ## Solubility, taste and flow The neutral salt is slightly soluble in water: about 0.8 g per 100 mL at room temperature, rising with temperature and with acidity. That is roughly ten times the solubility of calcium citrate tetrahydrate and several hundred times that of calcium carbonate. The difference is visible in a drink or a stick, where the malate can dissolve at a low dose and the carbonate stays in suspension. Taste follows the salt. Calcium malate is described as neutral, slightly salty or faintly bitter; calcium citrate is saline and sour; calcium carbonate is chalky. In a capsule the difference is hidden, but in a chew, a stick or a flavoured powder it decides whether the format works. Flow and density are physical grades. The catalog powder passes 95% through 40 mesh, and a granulated version flows better and makes less dust. Granulation does not change the calcium figure or the solubility, but it can change the fill weight and the tablet speed. Name the mesh and the granulation in the purchase order, not only the salt. The carbonate page and the citrate page carry their own calcium and solubility figures for comparison. ## What the grade does to the dose A 500 mg calcium claim needs about 2.15 g of the neutral salt at 23.3% calcium, about 3.82 g of calcium hydrogen malate at 13.1%, about 2.33 g of calcium citrate tetrahydrate at 21.5%, or 1.25 g of calcium carbonate at 40.0%. The acid salt is impractical in a capsule at that claim; the neutral salt needs three or four size 00 capsules, and the carbonate needs two. A 1,000 mg tablet of the neutral salt carries about 233 mg calcium; the same tablet weight of carbonate carries about 400 mg. A stick can carry 2.15 g of the malate without difficulty, and its solubility helps at a low dose, but the flavour and the acidulant still have to be tried. The grade decision is a mass decision before it is a taste decision. If the label claims a calcium figure, the weigh-up follows the calcium window of the lot, not the theoretical figure. A lot at 22.0% calcium needs more powder for the same claim than a lot at 24.0%. Use the certificate figure for the batch record and the specification midpoint for the label design. ## Writing the grade into the specification - “Calcium malate, neutral salt, C4H4CaO5, CAS 17482-42-7.” - “Calcium 22.0–24.0% by complexometric titration; assay 98.0–102.0% by HPLC, with the basis stated.” - “Loss on drying ≤2.0%; identification by infrared spectrum and HPLC.” - “Particle size ≥95% through 40 mesh; granulation and mesh named if different.” - “No calcium carbonate, calcium citrate, calcium hydrogen malate or carrier added,” unless a granulation aid is declared. - “Heavy metals and microbiology as listed; destination market confirmed before the order.” The exclusion clause matters because the calcium window alone can be met by a blend. A powder that mixes the neutral salt with a little carbonate can land at 24% calcium while the malate assay falls; the two lines together are harder to satisfy with a blend than either one alone. The catalog figures are on the calcium malate product page. The certificate lines are explained on the COA page; the elemental-calcium arithmetic is set out on the malate versus carbonate page; the label and market rules are on the compliance page. The difference between a hydrate and an anhydrous salt is defined in the hydrate entry. ### 02.1 Calcium malate vs calcium carbonate: elemental calcium and solubility URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-malate/grades/calcium-malate-vs-carbonate/ Reviewed: 2026-11-19 Calcium malate is 23.3% calcium by calculation and dissolves at about 0.8 g per 100 mL in water at room temperature; calcium carbonate is 40.0% calcium and practically insoluble, at roughly 0.0014 g per 100 mL. A 500 mg calcium claim therefore takes about 2.15 g of calcium malate or 1.25 g of calcium carbonate. The malate dissolves in acid without gas, while the carbonate releases carbon dioxide, so the two salts behave differently in a stick, a tablet and a label. In one lineCalcium malate carries about 23% calcium and dissolves at about 0.8 grams per 100 mL, while carbonate carries 40% and is practically insoluble. ## Elemental calcium, converted The neutral salt is C4H4CaO5, formula weight 172.15, so calcium is 40.08 ÷ 172.15 = 23.28% of the mass. Calcium carbonate is CaCO3, formula weight 100.09, so calcium is 40.08 ÷ 100.09 = 40.04%. The figures are fixed by the formulas, not by the assay. Divide the label claim by the calcium fraction to get the salt mass. At 23.3%, 500 mg of calcium needs 500 ÷ 0.233 = 2,146 mg of calcium malate. At 40.0%, the same claim needs 1,250 mg of calcium carbonate. The table adds the other common claims and keeps calcium citrate in the comparison because it is the salt most often weighed against the malate. Salt mass for a calcium label claim | Label claim | Calcium malate, 23.3% | Calcium carbonate, 40.0% | Calcium citrate tetrahydrate, 21.5% | 200 mg Ca | 858 mg | 500 mg | 930 mg | 500 mg Ca | 2,146 mg | 1,250 mg | 2,326 mg | 800 mg Ca (EU reference intake) | 3,433 mg | 2,000 mg | 3,721 mg | 1,000 mg Ca | 4,292 mg | 2,500 mg | 4,651 mg Read the table backwards for a fixed unit weight. A 1,000 mg tablet of calcium malate carries about 233 mg calcium; the same weight of carbonate carries about 400 mg. A size 00 capsule holds roughly 600–700 mg, so a 500 mg calcium claim runs to three or four malate capsules or two carbonate capsules. Use the certificate figure for a production batch and the theoretical figure for label design; a lot at 22.0% calcium needs more powder than one at 24.0% for the same claim. ## Solubility in water and in acid Solubility is the sharper difference. Calcium malate is quoted at about 0.8 g per 100 mL in water at room temperature, rising to about 1.2 g at 37.5 °C; calcium citrate tetrahydrate at about 0.10 g per 100 mL; calcium carbonate at about 0.0014 g per 100 mL, practically insoluble. The malate is roughly ten times as soluble as the citrate and several hundred times as soluble as the carbonate. Those figures are for water at room temperature. Solubility rises with temperature, and the malate is more soluble in acid because the malate ion is protonated as the pH falls. At a 500 mg calcium dose the 2.15 g of salt is close to the limit in a 250 mL serving, so volume and pH have to be checked. The carbonate is normally a suspension, not a solution, and it settles without a thickener. Solubility is a formulation property, not a statement about how much calcium the body absorbs. A soluble salt is easier to put into a drink; an insoluble salt is easier to compress. Neither decides the nutritional value of the product. ## The acid reaction Calcium carbonate reacts with acid to give calcium ions, carbon dioxide and water: CaCO3 + 2 H+ → Ca2+ + CO2 + H2O. Calcium malate gives calcium ions and malic acid, with no gas. In a stick or an effervescent tablet, the carbonate supplies the fizz and the malate does not. The reaction changes the format. An effervescent tablet needs the carbonate because the gas is the point of the form. A gummy or a chew that contains an acidulant will react with carbonate during cooking, so the gas has to be managed or the salt changed. A clear acidic drink suits the malate better, because it dissolves without foaming and contributes a mild acidic note rather than chalk. Both salts dissolve in gastric acid; the carbonate also releases gas. That is chemistry, not a claim about absorption. The formulation question is which salt gives the desired dissolution, taste and gas behaviour. ## What the mass does to the dosage form A 2.15 g dose fits a stick, a sachet or a large tablet, not a single capsule. Capsule count, tablet thickness and stick weight follow from the salt mass, which follows from the claim and the salt. Starting from the unit often makes the carbonate the only way to keep it small. The malate suits a liquid or a stick because it dissolves at a low dose and does not foam. The carbonate suits a compact tablet or an effervescent form because it carries more calcium per gram and supplies gas. A suspension can use either, with a thickener for the carbonate and a pH check for the malate. Combination products add the masses together. A calcium-magnesium stick with 200 mg calcium from malate already carries about 858 mg of the calcium salt plus the magnesium salt; the stick weight and flavour load follow. ## What the label must name In the European Union, the ingredient list names the calcium source from the positive list in Annex II to Directive 2002/46/EC, and calcium is declared in milligrams and as a percentage of the 800 mg reference intake. Calcium malate, calcium carbonate and calcium citrate malate are separate entries; the last is a mixed salt. In the United States, the Supplement Facts panel declares elemental calcium against a 1,300 mg Daily Value. The United Kingdom uses the 800 mg reference intake. The source name is not interchangeable. A carbonate product cannot declare calcium malate, and a blend must name both sources. If the salt changes at a fixed powder weight, the calcium figure nearly doubles or halves; if the claim is fixed, the powder weight moves. Either change needs a new label, batch record and specification. A front-of-pack source claim has to match the ingredient list; “made with calcium malate” fails if carbonate is also present. The reference intake entry explains the percentage calculation. ## Choosing between them When each salt fits the brief | Situation | Calcium malate | Calcium carbonate | High calcium claim in a few units | More mass and more units | About 40% calcium; compact | Effervescent tablet | No gas | Supplies the carbon dioxide | Clear or acidic drink | More soluble; dissolves without fizz | Reacts, foams, stays in suspension | Neutral taste | Neutral to slightly salty | Chalky | Label must name malate | The only option | Cannot be substituted | Acid-sensitive matrix | Less reactive | Gas and pH drift The table starts a trial; it is not a rule. No silent substitution: the label, the specification and the certificate must name the same salt. The calcium malate hub carries the catalog specification; the calcium carbonate page gives its figures; the calcium citrate page covers the third salt; the grade page covers hydrate and mesh; the quality page covers release. ### 03 Calcium malate stability: moisture, pH and the pack URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-malate/stability/ Reviewed: 2026-11-19 Calcium malate is an anhydrous salt that keeps in a sealed pack at ambient temperature; the powder's practical risks are moisture pickup, caking and, in an opened pack, microbial growth. In water it is only slightly soluble, and an aqueous formula adds pH, microbial and precipitation risks that the dry powder does not have. Shelf life is assigned from stability data for the exact pack and matrix, not from the certificate. In one lineCalcium malate keeps when it stays dry and sealed; in water, pH and microbial load decide how long the solution lasts. ## The powder: moisture, caking and colour The catalog sets loss on drying at not more than 2.0%, which is a release gate rather than a storage allowance. The anhydrous salt is not a deliquescent material, but the powder still picks up moisture from humid air once the pouch is open. The loss on drying rises, the as-is calcium figure falls, and the powder begins to cake. A tight seal and a dry store are part of the specification in practice. The pack is the barrier. The 1 kg foil pouch and the polyethylene liner in the 25 kg drum keep moisture out while they are intact; the seal and the liner are the weak points. A pouch that has been opened and folded over is not resealed in the same sense as a heat-sealed pack. Transfer a long-held remainder to a smaller dry container, or use it within the stated in-use period. Light is not the first variable for this salt. Calcium malate has no chromophore that makes it photolabile in the way a carotenoid or a quinone is, and the catalog colour, white to off-white, is a purity and drying indicator rather than a light-exposure indicator. Heat matters mainly through drying and caking, not through a low-temperature decomposition route. ## The solution: solubility, pH and microbes Calcium malate dissolves at about 0.8 g per 100 mL in water at room temperature. A 500 mg calcium dose is about 2.15 g of salt, which is close to the solubility limit in a 250 mL serving; a smaller volume leaves undissolved powder. Solubility rises as the pH falls, because the malate ion is protonated and the calcium is released from the salt. A pH rise can move the system back towards precipitation. An aqueous formula adds a microbial question that the dry powder does not have. Calcium malate is an organic salt, and a solution with water activity high enough to support growth needs a preservative system, a pH hurdle, a heat treatment or a validated short hold. A clear solution is not a stable solution by default; the preservative and the hold time have to be validated in the matrix. The matrix adds its own anions. Phosphate, citrate and carbonate can form less soluble calcium salts, and a change in pH or concentration can start a precipitate that was not present at make-up. Check the appearance and the calcium assay after storage, not only at release. ## What drives change Factors that move calcium malate during storage | Factor | What it does | Control | Moisture | Raises loss on drying; caking; dilutes the as-is calcium | Sealed pouch; dry store; liner closed | Heat | Drives drying and moisture migration; accelerates caking | Controlled store; cool process | pH | Lowers or raises solubility; can precipitate calcium salts | Set and monitor the matrix pH | Microbial load | Growth in aqueous matrices; spoilage and gas | Preservative, pH hurdle, heat step, hold validation | Formulation anions | Phosphate, citrate or carbonate can form less soluble salts | Trial the matrix; check appearance and assay | Pack and headspace | Humid air and oxygen at the surface | Intact seal; low headspace; opaque pack These factors interact. A warm, humid store is worse than either condition alone, and a solution at a pH near the precipitation boundary has less room for a small shift. The useful question is not whether calcium malate is stable in general, but whether it is stable in a named pack, at a named condition, for a named time. ## A stability protocol for the ingredient A useful protocol states the pack, the storage condition, the time points and the tests. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% relative humidity cover the warehouse; accelerated storage at 40 °C/75% relative humidity stresses the pack. For an aqueous product, add a pH and appearance arm at the process pH and a microbial challenge or preservative efficacy test. Test assay, calcium, loss on drying, appearance and microbiology at each point for the powder. For a solution, test pH, appearance, calcium assay, preservative level and microbial count. Report the individual results, not only a pass statement, and identify the pack and the lot family. A light-exposure arm is optional for this salt; moisture and pH are the priority. Ask for the stability summary for the pack you will buy. A 25 kg drum and a 1 kg pouch have different surface-to-volume ratios, headspace and opening histories, and a beverage has a different matrix from a capsule. Data from one format does not answer the question for another. ## The finished formula changes the answer A capsule or tablet has low water activity, but the shell and the excipients can transfer moisture. Check loss on drying at release and after storage, and check the appearance of the fill. A stick depends on the seal and the foil; inspect the strip, not only the powder. A gummy combines water, acid and heat, and the acid can move the calcium balance during cooking. A beverage combines pH, heat, oxygen and microbial risk. The ingredient's powder stability is the starting point, not the answer. A formula that also contains carbonate or bicarbonate should be checked for gas and pH drift, because the two salts do not sit quietly together in the presence of water and acid. The formulator decides whether an overage is needed; that is a label and stability decision, and it does not repair a pack that lets moisture in. The matrix, not the salt, usually sets the shelf life. ## How the shelf life is set We do not publish a single shelf-life number for calcium malate, because the pack and the storage condition set it. The assigned retest period belongs on the specification and is supported by the stability file for that pack. A number without a pack, a condition and a test panel is not a shelf life; it is a claim. After the retest period, re-assay the retained sample before extending use. Do not extend by assumption, and do not carry a bulk figure across to a repacked container. The product hub lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the microbiology method note describes the counts; the quality page describes the release workflow. ### 04 Calcium malate MOQ, packs and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-malate/moq/ Reviewed: 2026-11-19 Calcium malate is supplied from 1 kg, packed as a 1 kg foil pouch; the standard bulk pack is a 25 kg fiber drum, and the catalog powder passes 95% through 40 mesh. Lead time is 1–7 days for the standard pack, with granulation or a custom mesh quoted separately. A firm quotation needs the salt form, the calcium and assay figures, the mesh, the quantity and pack, the destination and Incoterm, and the documents the market requires. In one lineOne kilogram is a qualification pack from a released lot, and the 25 kg drum is a scale decision made after the trial. ## Why the minimum is 1 kg The minimum is a sampling decision, not a commercial threshold. One kilogram of a 40 mesh powder covers several bench trials, a short stability check and a retained sample, and it comes from a released lot with its own certificate and lot code. That lets a formulator test the actual material, including its flow and its solubility, before committing to a drum. The 1 kg pack is not a scoop from a bulk drum. It is a commercial unit with a label, a lot code and a certificate, which is what makes the sample traceable. A split from a larger lot is a repack with its own handling history, and it should be documented as such. The 25 kg drum is the bulk unit. It reduces handling per kilogram but commits inventory and a longer storage period. The drum may carry a different lot from the sample, so bridge the two with a short identity check rather than assuming the powder is the same. ## Packs and labels Standard packs for calcium malate | Pack | Construction | Typical use | Handling | 1 kg foil pouch | Foil with a food-grade liner | Sample, bench trial, small batch | Reseal; keep dry after opening | 25 kg fiber drum | Fiber drum with a polyethylene liner | Production | Palletised; check the liner on receipt | Granulated powder | 1 kg or 25 kg | Flow and dust control | A separate specification and certificate | Custom mesh | On request | Press or capsule filling trial | New certificate; longer lead time Every pack carries the product name, the salt form, the mesh, the lot code, the net weight, the production and expiry or retest dates, and the storage statement. The lot code is the link between the drum, the certificate and the retained sample; a pack without one cannot be traced. Granulation and a custom mesh are separate specifications, not a setting on the same pack. They change the flow, the dust and sometimes the fill weight, and each needs its own certificate. The grade page explains which variants change the powder and which only change the handling. ## Lead time and dispatch The standard 40 mesh material is quoted at 1–7 days from order confirmation. That window covers picking, document preparation and dispatch; it does not include the shipping transit, customs clearance or the customer's own quality release. A granulation or a custom mesh needs a production slot and a fresh certificate, so the lead time is longer and should be confirmed in writing. Documentation can set the date as much as production does. A certificate with a method the buyer's quality team has not seen, a missing allergen statement or a specification that needs a counter-signature can hold a shipment after the drum is ready. Send the document list with the enquiry so the file can be prepared in parallel. Ask for the dispatch date, not only the lead time. The Incoterm decides where the seller's responsibility ends and who books the freight; the documents should travel with the lot, not after it. ## What a quotation needs Seven details a calcium malate quotation needs | Detail | What to state | Why it changes the quote | Product and form | Neutral calcium malate, CAS 17482-42-7, anhydrous | “Calcium malate” alone covers more than one composition | Calcium and assay | 22.0–24.0% Ca; 98.0–102.0% assay, with the basis | Sets the mass per label claim and the release test | Mesh and granulation | 40 mesh, or a named custom mesh or granulation | Changes flow, fill weight and lead time | Quantity and pack | Kilograms, pouches or drums | Sets the pack and the lot allocation | Destination and Incoterm | Country, port or door, named place | Sets the delivery point and the documents | Documents and tests | COA, TDS, SDS, statements, third-party tests | Defines the release file and the preparation time | Required date | Delivery or ship date | Tests whether the standard lead time fits The salt form and the mesh are the two details most often left out. “Calcium malate, 23%” does not say neutral or hydrogen malate, anhydrous or hydrated, 40 mesh or 100 mesh. Two suppliers can answer that enquiry with two different powders and both be right. The calcium figure and the assay should be quoted together. A quotation that gives only the calcium figure has not described the anion; one that gives only the assay has not described the dose. ## The sample is a lot, not a demonstration The 1 kg pack is the qualification sample. Test calcium by titration, malate by HPLC, loss on drying and microbiology before scaling, and keep a retained sample from the same pack. The lot code on the sample, the certificate and the quotation should match. A sample that cannot be traced to a lot is a demonstration. If the project needs a smaller quantity for a bench trial, discuss it before ordering. A split from a bulk lot is a repack with its own traceability, not the catalog pack. Do not assume that a bench sample and the production drum will come from the same lot. The tests to run on the sample are the ones on the COA page: calcium, malate, loss on drying and the contaminant panel. A flow, solubility and taste trial belongs beside them, because a certificate cannot tell you how the powder runs. ## Terms to settle before the first order Before the purchase order, settle the commercial and quality terms: payment method and currency; Incoterm and named place; quantity tolerance; the retest or expiry date required on arrival; the document pack; the retained sample; and the change-control route for a mesh, granulation or supplier change. Write the specification into the purchase order, not into a side email. A purchase order that says “calcium malate” and a specification that says “neutral salt, 40 mesh, 22.0–24.0% Ca” are two different contracts. The certificate released against the order should quote the specification revision it was tested against. Returns and replacements follow the quotation and the quality agreement. A lot that fails the agreed specification should be handled through the retained sample and a joint re-test, not through a photograph of the powder. The pack, the lot and the certificate are one chain: the product hub carries the catalog specification, the stability page covers storage, the compliance page covers the market file, the MOQ entry defines the term, and the logistics page covers shipping and documents. ### 05 The regulatory file for calcium malate URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-malate/compliance/ Reviewed: 2026-11-19 Calcium malate, CAS 17482-42-7, is the neutral calcium salt of malic acid, and the regulatory file has to connect that exact salt to the destination, the daily dose and the label. The EU food-supplement list, the EU food-additive monograph and the US dietary-supplement route are different frameworks, and a document that fits one does not automatically fit another. The buyer's regulatory team confirms the route; this page lists the documents and checks that belong in the file. In one lineThe specification describes the powder; the regulatory file connects the salt, the dose and the label to the destination market. ## What the file contains Calcium malate is a small molecule, so the four file questions are narrower: which hydrate and specification version, which lot and certificate, which calcium limit and label rule, and what changes with a new source or drying route. The COA covers the lot, the TDS the specification and the SDS the handling; the destination route remains a separate check. ## European Union The positive list to check for a food supplement is Annex II to Directive 2002/46/EC, which contains an entry for calcium malate among the mineral substances. The listing is the start of the check, not the end: the buyer's regulatory team confirms the current consolidated text, the destination member state and whether the product is a supplement or a food. The labelling rules are in Regulation (EU) No 1169/2011 and in the supplement directive, and the nutrition declaration gives calcium in milligrams and as a percentage of the 800 mg reference intake. The food-additive route is a separate file. E 352(i) calcium malate has a monograph requiring not less than 97.5% C4H4O5Ca on the volatile-matter-free basis and volatile matter of not more than 2.0% after drying at 110 °C for three hours. E 352(ii) is calcium hydrogen malate, a different salt. A certificate written against the additive monograph does not answer the supplement question, and the reverse is also true. Contaminants are governed by Regulation (EU) 2023/915. For food supplements, lead is limited to 3.0 mg/kg, cadmium to 1.0 mg/kg and mercury to 0.10 mg/kg; there is no harmonised EU maximum for arsenic, so the buyer sets one. Check the current text before a launch, because the annexes are amended. Great Britain and Northern Ireland are checked separately. The GB file uses the retained GB list and labelling rules; Northern Ireland follows the EU framework. The buyer's team confirms which of the two applies to the destination. ## United States The US route for a calcium salt in a dietary supplement is the dietary-supplement framework, not the food-additive listing. The Supplement Facts panel declares elemental calcium against a 1,300 mg Daily Value, and the ingredient list names the salt. The buyer's regulatory team confirms the basis on which the ingredient is included and reviews the label, the serving size and any statement on the pack. Manufacturing is covered by the current good manufacturing practice rules for dietary supplements in 21 CFR 111. The certificate supports the lot release, but it does not replace the brand's own specification and supplier qualification. California Proposition 65 runs in parallel and is triggered by the daily dose of lead, not by the concentration alone; the calculation belongs in the file. ## Contaminants and the finished dose Metal limits to confirm for the finished product | Parameter | Typical supplement reference | What the file should show | Lead (Pb) | 3.0 mg/kg in the EU supplement | Lot result, method, limit and the finished-product calculation | Cadmium (Cd) | 1.0 mg/kg in the EU supplement | Lot result and any category exception that applies | Mercury (Hg) | 0.10 mg/kg in the EU supplement | Lot result and method | Arsenic (As) | Set by the buyer where no harmonised limit applies | The agreed limit, the method and the result The result is measured on the powder, while the limit applies to what the consumer takes. A lot at 1.0 mg/kg lead contributes 1.0 µg per gram of powder, so a 2.15 g daily dose contributes 2.15 µg. The finished-product calculation is the number the file should carry. Microbiology is a release gate as well as a contaminant question. The catalog requires APC ≤1,000 cfu/g, yeast and mould ≤100 cfu/g, and E. coli and Salmonella absent. Aqueous products need their own preservation and challenge data; the powder certificate does not cover the finished drink. ## Label and claims No disease-related claim is made for this ingredient on this page, and none should be inferred from the specification. In the EU, nutrition and health claims are governed by Regulation (EC) No 1924/2006 and the authorised calcium claims are listed in Regulation (EU) No 432/2012, each with its own conditions. Only the listed wording may be used, and the source or high threshold is part of the condition. In the United States, a structure or function statement is the brand's responsibility and must carry the DSHEA disclaimer; a disease claim is outside the supplement route. The buyer's regulatory reviewer confirms the wording, the population and the conditions for the destination, and a supplier certificate supports that review without approving the claim. ## Documents the file needs Documents for a calcium malate file | Document | What it answers | Specification, current revision | What is being bought, including the salt form, mesh and basis | Certificate of analysis, per lot | What was released, with methods and results | Technical data sheet | Typical values, solubility, handling and pack | Safety data sheet | Hazards, transport and first aid | Allergen and GMO statements | Label and market declarations | Origin and residual-solvent statements | Source, process and customer declarations | Change-control notification | What happens if the source, process or pack changes Each document should carry a version, a date and a lot or specification reference. The specification on the quotation, the certificate and the label should be the same revision. ## Checklist before the first order - Salt form, CAS number and formula are named: neutral calcium malate, C4H4CaO5. - The specification revision, calcium window, assay basis, mesh and pack are agreed in writing. - The certificate, data sheet, safety sheet and statements are on file with dates. - The contaminant results are converted to the finished daily dose. - The label and any claim have been reviewed for the destination. - The source, process and pack are under change control. The product page carries the catalog specification; the calcium malate hub is the starting point, the COA page explains the lot certificate, the identity page covers the analytical evidence, and the grade page covers the salt and mesh choice. The EU regulatory summary and the US regulatory summary gather the instruments, and the quality page describes the release file. ### 06 How to prove a calcium malate lot is the neutral salt URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-malate/identity/ Reviewed: 2026-11-19 A calcium malate lot is the neutral salt when the calcium titration is near 23.3%, the HPLC malate result accounts for the rest of the mass, the loss on drying is at or below 2.0%, and the infrared spectrum matches the reference. The calcium figure alone cannot separate the malate from the carbonate, the citrate or the hydrogen malate; the malate result and the calcium-to-malate ratio do that. A carbonate blend can be built to a calcium figure, but not to the malate figure as well. In one lineA calcium figure near 23% and a malate peak are necessary but not sufficient; the two have to agree with each other and with the moisture. ## The identity layers A certificate can name the right material and still fail to prove it. The layers below are separate questions, and each one needs its own evidence. A supplier who answers only the first has described the paperwork, not the powder. Layers of calcium malate identity | Layer | Question | Test | What it proves | Document | Is the salt named? | Name, formula, CAS number | Paperwork only | Calcium | How much calcium is present? | Complexometric titration | The calcium load, not the anion | Malate | Is the anion malate? | HPLC against a malate standard | The organic counter-ion | Mass balance | Do the numbers close? | Assay, loss on drying, impurities | Consistency of the figures | Solid form | Is it a crystalline salt or a blend? | Infrared spectrum and X-ray diffraction | The solid phase, not the purity ## The calcium-to-malate ratio The neutral salt has one calcium ion for each malate dianion. Calcium is 23.28% of the formula mass and the malate dianion is 76.72%, so a pure lot should report those figures, adjusted for moisture and impurities, and the two should sum to approximately 100% with the loss on drying. A certificate that reports 23.0% calcium and 76.0% malate at 1.0% loss on drying is internally consistent; one that reports 23.0% calcium and 60% malate is not. The calcium figure is a useful first screen because the common calcium salts sit at different stoichiometric values. The table is not a specification; a blend can be formulated to any figure, so the screen narrows the question rather than closing it. Stoichiometric calcium figures as a first screen | Material | Calcium by calculation | What a result near this figure suggests | Calcium hydrogen malate | 13.1% | The acid salt, a hydrate or a dilution | Calcium citrate tetrahydrate | 21.1% | The citrate, or a malate-citrate blend | Calcium malate, neutral | 23.3% | The salt described here | Calcium carbonate | 40.0% | The carbonate, or a calcium-rich blend | Calcium hydroxide | 54.1% | An alkaline calcium source | Calcium oxide | 71.5% | An alkaline calcium source A figure above the 24.0% top of the catalog window is the strongest warning. The neutral salt cannot reach it without a calcium-rich impurity, and the malate assay will fall in proportion. A figure below 22.0% points the other way: a hydrate, a carrier or a different salt. The ratio is stronger than either figure alone because the two methods measure different things. The titration sees calcium, the HPLC sees malate, and the mass balance sees water. A blend has to satisfy all three at once, which is harder than satisfying the calcium window. ## X-ray diffraction and the solid form X-ray diffraction answers a different question: is the solid crystalline, and does its pattern match a reference? It can distinguish the crystalline malate from a carrier, and it can show a calcite pattern if calcium carbonate is present as a separate phase. The calcium figure cannot show a phase; the diffraction pattern can. XRD is not a routine release test for this product. Request it when a source is new, when the calcium and malate figures disagree, or when a carbonate is suspected but the acid test is not decisive. Ask for the reference pattern and the detection limit before reading a “match” statement; a pattern without a reference proves only that the sample is crystalline. The infrared spectrum is the routine solid-form check and is already on the catalog. It shows the malate carboxylate bands and the absence of a carbonate band at the level of the method. Neither IR nor XRD is a purity assay, and neither replaces the calcium and malate results. ## What adulteration looks like Common calcium malate substitutions and the signals | Adulterant | What it does | Signal | Test | Calcium carbonate | Raises calcium; adds a carbonate phase | Gas in dilute acid; calcium above window | Acid test, XRD, calcium titration | Calcium citrate | Lowers calcium; adds citrate | Calcium near 21%; citrate by HPLC | HPLC, infrared spectrum | Calcium hydrogen malate | Lowers calcium to about 13% | Calcium low; malate high relative to calcium | Calcium titration, XRD | Calcium hydroxide or oxide | Raises calcium and pH | Alkaline slurry; calcium above window | pH, titration, XRD | Malic acid | Lowers calcium; acidifies | Low pH; calcium low; malate by HPLC | pH, HPLC, titration | Carrier or moisture | Lowers calcium and assay | Loss on drying high; assay low | Loss on drying, mass balance The acid test is the quickest screen for a carbonate: a few milligrams in dilute acid give bubbles for the carbonate and no bubbles for the malate. It is not quantitative and it does not detect a citrate, but it catches the simplest substitution before a laboratory result arrives. ## How to write identity into the specification - “Calcium malate, neutral salt, C4H4CaO5, CAS 17482-42-7.” - “Calcium 22.0–24.0% by complexometric titration; assay 98.0–102.0% by HPLC, with the basis stated.” - “Loss on drying ≤2.0%; identification by infrared spectrum and HPLC retention.” - “Particle size ≥95% through 40 mesh; heavy metals and microbiology as listed.” - “No calcium carbonate, calcium citrate, calcium hydrogen malate or carrier added,” unless a granulation aid is declared. - “The certificate reports calcium, malate and loss on drying in the same lot.” The exclusion clause is the part that prevents a blend from passing on the calcium window. The clause should be written into the purchase order and quoted on the certificate, so the laboratory knows what it is releasing against. ## Five questions for the supplier - Which salt form is this lot, and which CAS number is on the certificate? - What is the calcium result, and which titration method produced it? - What is the malate result by HPLC, and what standard and detection were used? - What is the loss on drying, and is the assay reported as-is or on the dried basis? - If the lot is disputed, will you accept a joint re-test on the retained sample, with XRD if a carbonate is suspected? Five direct answers amount to an identity file. A single calcium percentage does not. The product hub carries the catalog specification; the COA page shows where each figure sits on the certificate; the grade page compares the salt forms; the malate versus carbonate page covers the calcium and solubility comparison; the XRD method note, the HPLC method note and the methods section describe the tests. ### 01 What the COA for magnesium chloride actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-chloride/coa/ Reviewed: 2026-11-19 Magnesium chloride hexahydrate is a white, deliquescent solid that carries more than half its mass as water of crystallisation, so its certificate cannot be read like a dry salt's. The release lines are appearance, identity by IR and titration, assay by complexometric titration, magnesium, water by Karl Fischer, the heavy-metal panel and microbiology. The two figures that decide whether two certificates describe the same material are the assay basis and the water. In one lineOn a hexahydrate that is more than half water, the assay only means something with its basis, the Karl Fischer water and the chloride beside it. ## The certificate as a test report A certificate is auditable when each line carries the parameter, the method and the release limit, and the measured result sits in its own column. The table below is the catalog gate for the hexahydrate. It is not a batch result: the lot result belongs beside the limit it was released against, not in place of it. The identity pair in the catalog is IR plus titration. That pair names the magnesium salt and the hydrate family, but it puts no number on the anion. Chloride by argentometric titration is the line that does, and it is worth asking for even where the catalog leaves it off; the titration method note explains what the EDTA end-point does and does not prove. Release tests · magnesium chloride hexahydrate | Parameter | Method | Release limit | Appearance | Visual | White powder or flakes | Identification | IR and complexometric titration | Conforms to the reference | Assay | Complexometric titration | ≥99.0% on the stated basis | Magnesium | Complexometric titration | 11.5–12.5% | Water | Karl Fischer | 45.0–55.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent ## The basis question: 99.0% of what? On a dry salt, a 99.0% assay needs little explanation. Here it needs one, because the same powder can be described as 99.0% magnesium chloride hexahydrate or as roughly 46% magnesium chloride with the water removed. The first reading takes the hydrate as the substance; the second takes anhydrous MgCl2 as the substance and reports it on the dried basis. Both are legitimate. They are not the same number. The magnesium line does not settle it. If the 99.0% is the hydrate as-is, 99% of the theoretical 11.96% magnesium lands at about 11.8%. If the 99.0% is MgCl2 on the dried basis, the as-is MgCl2 content is about 46.4%, and the magnesium is again about 11.8%. The two certificates agree on magnesium and disagree on the assay by more than a factor of two. Only the basis distinguishes them. The water line is the second half of the same question. The hexahydrate carries 53.2% water at the theoretical formula; the catalog allows 45.0–55.0%. If the only other component were MgCl2, 45% water would leave 55% MgCl2 and about 14.0% magnesium — outside the magnesium range. A certificate reporting 45% water and 12.0% magnesium is therefore not describing a simple hexahydrate, whatever the assay line says. The two figures have to be read together, and a lot near an edge of one range should be checked against the other. ## Release limit versus batch result The release limit is the boundary; the batch result is the measurement. A result column filled with the specification range is a copy of the gate, not evidence about the lot. The certificate should also name the method for each line, because a magnesium figure by EDTA and a magnesium figure by ICP-OES answer slightly different questions. What the result column should contain | Parameter | Release limit | Result column | Assay | ≥99.0%, with the basis | A measured percentage and the basis it is reported on | Magnesium | 11.5–12.5% | A measured percentage by the named titration | Water | 45.0–55.0% | A measured percentage by Karl Fischer | Chloride | Reported against the theoretical 34.9% | A measured percentage, where the anion is tested | Heavy metals | Per element | A figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot “Conforms” is a conclusion, and the reader should be able to reach it from the numbers. For the anion, a chloride result far above the theoretical 34.9% points to sodium chloride or another chloride source; a result far below it points to an oxide, a carbonate or a different magnesium salt. Neither is visible in the assay alone. ## What moves between batches Water is the parameter that moves most. Crystallisation and drying set it, and the pack then decides whether it stays put. A lot dried to the low end of the range can pick up water in a humid filling room before the pouch is sealed; the water result on the certificate then describes the sample, not the pack. Ask when the sample was taken and whether it came from a sealed container. The physical form moves with the finishing line: a powder and a flake can come from the same crystalliser and differ in bulk density, flow and dissolution rate. The chloride figure can shift with the brine source, and the heavy-metal panel with the source and the purification step. Colour is a weak signal on a white salt; a grey or yellow tint is a reason to ask about the source and the filters, not a specification failure on its own. ## When to order an outside test Order an independent test for a new source, a first shipment, a shift in the water or chloride figure, or a disputed hydrate state. The useful panel is magnesium by EDTA, chloride by argentometric titration, water by Karl Fischer, ICP-MS for the heavy metals, microbiology, and XRD when the solid form is the question. If the source is brine or seawater, add sulfate and bromide by ion chromatography; neither line is in the catalog, and both are plausible companions in that raw material. For a disputed lot, the sample tested must be the retained sample from the sealed pack, and the report must name the lot. A water result from an opened scoop is evidence about the room, not about the drum. The ICP-MS method note covers the contaminant panel, and the microbiology note covers the counts and absence tests. ## What to compare between suppliers Put six lines side by side: the hydrate state and the water figure; the assay and its basis; magnesium and chloride on the same lot; the contaminant panel; the pack and its liner; and the lot code, which should match the certificate, the pouch and the retained sample. Two quotations that agree on magnesium but differ on the assay basis are not describing the same specification. The catalog specification is on the magnesium chloride product page. The hydrate question is taken further on the grade page; the identity tests are on the identity page; the release workflow is on the quality page, and the methods library is at the analytical methods index. ### 02 Hexahydrate, anhydrous or flakes: choosing a magnesium chloride grade URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-chloride/grades/ Reviewed: 2026-11-19 Magnesium chloride is sold as the hexahydrate, as the anhydrous salt, and as powder or flakes, and the trade name does not distinguish them. The hydrate state is the first decision because it sets the magnesium figure per gram at about 12% for the hexahydrate and about 25.5% for the anhydrous salt. The physical form is the second decision, because a flake and a 40 mesh powder behave differently in a hopper and in a capsule. In one lineThe hydrate state is the grade decision: it moves the magnesium figure per gram from about 12% to about 25.5% before the powder or the flake is chosen. ## Why the grade question comes first The catalog line here is magnesium chloride hexahydrate, MgCl2·6H2O, CAS 7791-18-6, a white deliquescent powder or flake with 11.5–12.5% magnesium and 45.0–55.0% water. That line describes one hydrate and one physical family. The anhydrous salt, MgCl2, is a different material with a different formula, a different magnesium figure and a much stronger affinity for water. The water in the hexahydrate is not a coating or a residual solvent. It is part of the crystal: six water molecules for every magnesium ion, which is why the formula weighs 203.3 g/mol rather than 95.2 g/mol. Changing the hydrate changes the mass per mole, and with it the mass of powder that delivers a given magnesium dose. The physical form sits underneath the hydrate decision. A powder and a flake can come from the same crystalliser and carry the same water figure; they differ in bulk density, flow and the time they take to dissolve. A specification that names only “magnesium chloride” has fixed neither the hydrate nor the form, and two suppliers can quote two different materials against it. ## The forms side by side Magnesium chloride forms and their magnesium figures | Form | Formula | Magnesium (theoretical) | Water of crystallisation | Handling | Hexahydrate powder | MgCl2·6H2O | 11.96% | 53.2% | Deliquescent; 40 mesh powder | Hexahydrate flakes | MgCl2·6H2O | 11.96% | 53.2% | Deliquescent; slower to dissolve | Anhydrous powder | MgCl2 | 25.53% | None | Strongly hygroscopic; a separate specification The anhydrous row is not a drop-in for the hexahydrate. At the same fill weight it delivers about twice the magnesium, so a capsule built on the hexahydrate would be roughly double-strength if the salt were swapped without recalculating the fill. The assay basis is a separate trap: a hexahydrate figure can be reported as the hydrate or as MgCl2 on the dried basis, and the two readings differ by more than a factor of two. The COA page sets out that arithmetic in full. ## Deliquescence, solubility and flow The hexahydrate is deliquescent. Above roughly one-third relative humidity at room temperature it draws water from the air, and at high humidity it can dissolve in the water it has absorbed. A powder has more surface per kilogram than a flake, so it takes up water faster and cakes sooner. Both forms need a moisture-barrier pack, and the difference between them is the rate, not the direction. Both physical forms are very soluble in water and give a clear, salty-bitter solution. The flake dissolves more slowly because it presents less surface, and it may need longer agitation or a warmer solvent; a flake is not a granule, and milling it changes the particle-size line. The 40 mesh powder is the catalog format for dry blending, where flow and dust are the practical questions. Flow is where the hydrate bites in production. A powder that has taken up a little water bridges in the hopper and sticks to the auger; a flake that has taken up water clumps in the bag. The dose-room humidity, the time the material sits open and the liner all belong in the specification, because they decide whether the lot that passed the certificate still flows on the line. ## The magnesium arithmetic and the label One gram of the hexahydrate delivers 119.6 mg of magnesium; one gram of the anhydrous salt delivers 255.3 mg. A 100 mg magnesium dose therefore needs 836 mg of the hexahydrate or 392 mg of the anhydrous salt. A 500 mg capsule of the hexahydrate carries about 59.8 mg magnesium, and the same capsule of the anhydrous salt would carry about 127.6 mg. The water figure moves the number again. At 45% water the powder would carry about 14.0% magnesium; at 55% it would carry about 11.5%. The spec ranges for magnesium and water narrow that window, but the fill weight should still be calculated from the measured magnesium figure on the lot, not from a nominal 12%. A 5% difference in the magnesium figure is roughly a 5% difference in the capsule fill, which is enough to fail a label check. The label names the salt, magnesium chloride, and the nutrition panel declares elemental magnesium. In the EU the reference intake for magnesium is 375 mg for adults; in the US the Daily Value is 420 mg for adults and children four years and older. The hydrate state belongs in the specification and in the dose calculation, even where the ingredient list does not spell it out. ## What to write into the specification - “Magnesium chloride hexahydrate, CAS 7791-18-6, MgCl2·6H2O.” - “Assay ≥99.0% by complexometric titration, with the basis stated on the certificate.” - “Magnesium 11.5–12.5%; water 45.0–55.0% by Karl Fischer.” - “Appearance: white powder or flakes; powder at 40 mesh where the dosage form needs it.” - “Heavy metals and microbiology as listed; sulfate and bromide reported where the source is brine.” - “Pack: 1 kg foil pouch or 25 kg lined drum; store sealed and dry.” ## When another form is the wrong choice The anhydrous salt is the wrong choice for a line that is not set up for a strongly hygroscopic powder: it needs a dry room, sealed transfer and a pack that keeps it dry, and the handling is a project in itself. The flakes are the wrong choice for a direct-compression blend that needs a free-flowing 40 mesh powder, unless the line can mill them. A technical grade is the wrong choice for any food or supplement use, whatever the assay says. The reverse also holds. A buyer who needs a small, high-potency capsule should not accept the hexahydrate and compensate with a larger fill without checking the label and the market file. The hydrate is part of the identity of the material, not a unit conversion applied at the balance. The catalog line is on the magnesium chloride product page. The pack and the deliquescence question are on the stability page; the direct comparison with the sulfate is on the level-four page; the lactate is the other highly soluble magnesium salt in the range, and it is described on the magnesium lactate page. ### 02.1 Magnesium chloride vs magnesium sulfate: solubility, chloride and the pack URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-chloride/grades/magnesium-chloride-vs-sulfate/ Reviewed: 2026-11-19 Magnesium chloride hexahydrate and magnesium sulfate heptahydrate are both white, water-soluble magnesium salts, and at equal magnesium dose both bring a counter-ion load of a few hundred milligrams. The difference that matters in a plant is the chloride: it makes the salt deliquescent at ordinary humidity and aggressive to stainless steel, while the sulfate is stable in a normal pack. The two are not interchangeable on the label, in the hopper or in the warehouse. In one lineThe two salts dissolve easily, but the chloride makes magnesium chloride deliquescent, so its pack and its process contact differ from the sulfate's. ## Two salts, two counter-ions Both materials are hydrates of a magnesium salt, and both are sold as white solids. The similarity ends at the anion. Magnesium chloride hexahydrate is MgCl2·6H2O, CAS 7791-18-6; magnesium sulfate heptahydrate is MgSO4·7H2O, CAS 10034-99-8. The molar masses differ by about 43 g/mol, and the magnesium figures differ by about two percentage points. Magnesium chloride hexahydrate against magnesium sulfate heptahydrate | Property | Magnesium chloride hexahydrate | Magnesium sulfate heptahydrate | CAS number | 7791-18-6 | 10034-99-8 | Formula | MgCl2·6H2O | MgSO4·7H2O | Molar mass | 203.30 g/mol | 246.47 g/mol | Magnesium | 11.96% | 9.86% | Counter-ion | 34.88% chloride | 38.97% sulfate | Water of crystallisation | 53.17% | 51.17% | Solubility in water | Very soluble | Freely soluble | Behaviour in air | Deliquescent above about 33% relative humidity | Not deliquescent; can lose water in dry air The table is a starting point, not a specification. The hydrate state has to be named either way, because the anhydrous forms carry roughly twice the magnesium per gram and behave differently in a pack. ## Solubility and the solution Both salts dissolve readily, which is why both appear in sticks, drink mixes and liquid formats. The chloride dissolves to a higher concentration at room temperature, and its solubility changes less as the water warms; the sulfate's solubility climbs more steeply with temperature. For a concentrated stock, that difference can decide whether the formula is practical without warming or a larger volume. The chloride also gives a saltier taste at the same magnesium dose, while the sulfate is more purely bitter. Taste is a formulation problem, not a specification line, but it is the reason two products with the same magnesium figure can taste different. A switch from one salt to the other usually needs a taste panel and a masking change, not only a new certificate. Solubility is not the same as stability. A clear solution of either salt can grow microorganisms, and a chloride solution attacks stainless steel in a way a sulfate solution does not. The stability page takes the solution questions further. ## The chloride load and the label At equal magnesium dose, both counter-ion loads are in the hundreds of milligrams. A 100 mg magnesium dose needs about 836 mg of the chloride hexahydrate, which brings about 292 mg of chloride, or about 1,014 mg of the sulfate heptahydrate, which brings about 395 mg of sulfate. The chloride load is lighter by mass, but it is a different ion with a different taste and a different effect on the equipment. Chloride is the anion that makes a magnesium solution aggressive to stainless steel. It pits 304 parts, and 316L is more resistant but not immune at high concentration and temperature. A sulfate solution is milder on the same equipment, so a plant that switches salts has to review the contact materials, the hold times and the cleaning regime as well as the label. The label names the salt, not only the magnesium. The EU ingredient list says magnesium chloride or magnesium sulfate, and the nutrition declaration gives the elemental magnesium. Chloride and sulfate are not separate mandatory lines in the nutrition declaration, so the counter-ion appears through the ingredient name and the taste rather than through a number. A formula that changes the anion without changing the ingredient list is mislabelled even when the magnesium figure is unchanged. ## The pack: deliquescence against a stable hydrate This is the difference that decides the warehouse. Magnesium chloride hexahydrate is deliquescent above roughly one-third relative humidity, so at ordinary ambient humidity it draws water until it forms a saturated solution on its surface. The sulfate heptahydrate is not deliquescent at ordinary humidity, and in very dry air it can lose part of its water instead. The two need different packs for the same shelf life. The chloride needs a foil laminate with a heat seal for the 1 kg pouch and a sealed inner liner for the 25 kg drum. A clear film or a paper sack is not a barrier for this salt. The sulfate is more forgiving: a lined drum or a bag with a moderate moisture barrier is usually enough, provided the store is dry and the liner is closed. A pack study for one salt does not transfer to the other. The test that shows the difference is weight gain. Weigh the sealed pack over the storage period as well as testing the powder: a chloride pouch that gains water is failing at the barrier, while a sulfate pack can gain or lose a little water without the powder dissolving. The MOQ page lists the standard chloride packs. ## When to choose which Choose the chloride when the magnesium figure per gram matters, when a salty taste fits the formula, or when a concentrated solution is wanted. It carries about 21% more magnesium per gram than the sulfate heptahydrate, and it dissolves to a higher concentration. Accept the deliquescence and the chloride attack as part of the choice, and specify the pack and the contact materials accordingly. Choose the sulfate when a more forgiving pack, a milder effect on stainless steel or a bitter rather than salty taste fits the project. It carries less magnesium per gram, so the fill or the serving is larger for the same dose. Neither salt is universally better; the formula, the pack and the plant decide. If the objection to the chloride is the chloride itself, the lactate is the other highly soluble magnesium salt in the range: it carries 8.5–9.5% magnesium, gives a neutral solution and avoids both the deliquescence and the chloride load. The magnesium lactate page sets out its specification. The citrate is the less soluble option, described on the magnesium citrate page. ## What to write into the specification - “Magnesium chloride hexahydrate, CAS 7791-18-6, MgCl2·6H2O.” - “Magnesium 11.5–12.5%; water 45.0–55.0% by Karl Fischer.” - “Chloride reported against the theoretical 34.9%; sulfate and bromide reported where the source is brine.” - “Assay ≥99.0% by complexometric titration, with the basis stated.” - “Pack: 1 kg foil pouch or 25 kg lined drum; store sealed and dry.” - “No substitution of the sulfate, the lactate or the anhydrous salt without a written change control.” The catalog line is on the magnesium chloride product page; the hydrate forms are compared on the grade page; the EDTA titration is described in the method note; the release workflow is on the quality page. ### 03 Magnesium chloride is deliquescent; the pack decides the shelf life URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-chloride/stability/ Reviewed: 2026-11-19 Magnesium chloride hexahydrate is deliquescent, and that one property shapes the rest: at ordinary warehouse humidity it draws water from the air, the water line on the certificate rises, and the powder can cake or turn into a slurry. A sealed foil pouch or a lined drum holds it; an open liner in a humid filling room does not. The chemistry is stable, but the water content is not, and the pack is what keeps the two apart. In one lineMagnesium chloride hexahydrate is deliquescent, so the foil, the liner and the dose-room humidity decide the shelf life as much as the chemistry does. ## The powder: water, deliquescence and the pack The catalog allows 45.0–55.0% water against a theoretical 53.2% for the hexahydrate, and that range is a two-sided gate. A lot near the top has picked up surface water; a lot near the bottom has lost part of its water of crystallisation, and its magnesium figure per gram is correspondingly higher. The magnesium line and the water line have to be read together, as the COA page sets out. The deliquescence point is the number to keep in mind. Above roughly one-third relative humidity at room temperature, the solid draws water until it forms a saturated solution on its surface. A warehouse at 50–60% relative humidity is above that point all year, so the sealed pack is doing the work, not the ambient air. Once the pack is open, the clock starts: the powder gains weight, the surface becomes sticky, and the flow that the filling line depends on disappears. The pack has to be a moisture barrier, not a bag. A foil laminate with a heat seal is the practical construction for the 1 kg pouch; a clear film or a paper sack is a retail look, not a barrier. The 25 kg fiber drum relies on its inner liner, and the liner has to be closed between uses. A desiccant can dry the headspace, but it cannot compensate for a laminate with a pinhole or a liner that was left open overnight. ## The solution: chloride, corrosion and taste The hexahydrate is very soluble and gives a clear, salty-bitter solution. That is convenient for a stick pack and awkward for a plant: chloride solutions are aggressive to stainless steel, and a magnesium chloride line can pit 304 parts that a sulfate line would leave alone. 316L contact parts, short hold times and a cleaning regime that removes the residue belong in the process description, not only in the maintenance schedule. The solution is also a growth medium. Magnesium chloride does not preserve a beverage at the concentrations used for a mineral dose, and a clear liquid at neutral pH with no other hurdle is a microbiological risk. If a liquid is unavoidable, validate the hold time, the preservative system and the fill temperature, and check the chloride attack on the filler and the pump seals at the same time. In an alkaline matrix, magnesium can precipitate as the hydroxide and show up as haze or sediment rather than as an assay loss. The pH window has to be tested in the real formula; a bench solution at neutral pH does not predict a drink buffered at pH 10. ## What drives change Factors that move magnesium chloride in storage and in formula | Factor | Effect | Control | Humidity above about 33% | Water uptake, caking, weight gain | Foil laminate, sealed liner, dry store | Very dry air | Partial dehydration; magnesium figure rises | Keep the pack closed; avoid long dry holds | Heat | Faster uptake, faster corrosion in solution | Controlled store; cool process | Chloride in solution | Pitting of stainless steel; metal pick-up | 316L contact parts; short hold; cleaning regime | Alkaline matrix | Magnesium hydroxide haze or sediment | Trial the matrix pH; buffer if needed | Open pack | Humid headspace; repeated opening | Single-use pouches; reseal; desiccant where needed The factors reinforce each other. A warm, humid store raises the uptake rate, and an opened pouch adds a fresh humid headspace at every scoop. The useful question is not whether magnesium chloride is stable, but how much water the pack lets in over the shelf life and what that does to the powder. ## A stability protocol for the ingredient A useful protocol states the pack, the storage condition, the time points and the tests. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% relative humidity cover the warehouse; accelerated storage at 40 °C/75% relative humidity stresses the pack. Add a humidity challenge at the deliquescence point, because a sealed pouch that passes at 60% relative humidity can still fail at 75%. Weigh the pouch as well as testing the powder. A weight-gain curve is the most sensitive line for a deliquescent salt: 0.5% on a 1 kg pack is 5 g of water, which is easy to measure and hard to hide. Test magnesium, water, chloride, appearance and microbiology at each point, and report the individual results rather than a pass statement. Sample points at 0, 1, 3, 6, 12 and 24 months suit a bulk ingredient; the pack and the climate set the final schedule. ## The finished formula changes the answer A capsule or tablet protects the powder from the room, but not from the excipients. The shell and the filler can carry water, and a hygroscopic fill can pull water through the shell over months. Check the fill's water figure and the capsule's appearance after storage, not only at release; a tight HDPE pack with a desiccant, or a blister, is usually needed for a deliquescent fill. A stick pack lives or dies on its seal. A foil laminate with a pinhole lets humid air into a small headspace, and the powder has nowhere to shed the water. Inspect the strip as well as the powder. In a gummy or a chew, the water activity of the matrix and the salty-bitter taste dominate; the salt is no longer the moisture sink it is in a dry blend. ## How the shelf life is set We do not publish a single shelf-life number for magnesium chloride, because the pack and the storage condition set it. The assigned retest period belongs on the specification and is supported by the stability file for that pack, with the water gain and the magnesium figure as the trend lines. A number without a pack, a condition and a test panel is not a shelf life. After the retest period, re-assay the retained sample before extending use, and check the water figure against the 55.0% limit. Do not carry a bulk figure across to a repacked pouch. The product hub lists the standard packs; the MOQ page covers the pouch and the drum; the titration note describes the magnesium assay; the quality page describes the release and retest workflow. ### 04 Magnesium chloride: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-chloride/moq/ Reviewed: 2026-11-19 The MOQ for magnesium chloride hexahydrate is 1 kg, supplied as a 1 kg foil pouch; the standard bulk pack is a 25 kg fiber drum with a sealed inner liner. Lead time is 1–7 days for the standard pack. A firm quotation needs the hydrate state, the assay basis, the quantity and pack, the destination and Incoterm, the documents, and the intended use and market. In one lineOne kilogram is the smallest order because the pack, not a scoop from the drum, is what keeps a deliquescent salt traceable and dry. ## Why the minimum is 1 kg A 1 kg pack covers a bench trial, a retained sample and an independent identity test, and it is small enough to ship by air without a pallet. More importantly for this salt, it is a sealed commercial unit with a lot code. A deliquescent powder that is split from a drum and repacked in a humid room has already started to change before it reaches the bench, and the split has lost the link between the sample and the lot. The 25 kg fiber drum is the production unit. It reduces handling per kilogram and the number of times the material is exposed, but it commits inventory and needs a dry store with room to keep the drum closed. The MOQ is a pack decision, not a volume incentive: the smallest pack that can be sealed, sampled and traced is the one that carries the quality data. ## Packs and formats Standard magnesium chloride packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Heat-sealed moisture barrier; reseal after opening | Fiber drum with liner | 25 kg | Production | Sealed inner liner; lot code on drum and liner | Flakes | On request | Dissolution and handling | A physical form, not a packing choice The pouch has to be a foil laminate. A clear film, a paper sack or a woven bag passes the eye test and fails the humidity test, because the powder inside is trying to reach equilibrium with the room. The drum relies on its liner in the same way: a fiber wall is not a moisture barrier, and an open liner turns the drum into a humid chamber. The powder is the standard format at 40 mesh. A flake is a different physical form with a different dissolution rate, and it should be quoted as a specification change, not as a packing preference. If the dosage form needs a coarser or a freer-flowing powder, say so before the quotation, because the change moves the particle-size line and may move the lead time. ## Lead time and dispatch The standard pack is quoted at 1–7 days from order confirmation. That window covers picking, document preparation and dispatch; it does not include the shipping transit, customs clearance or the customer's own quality release. A custom pack, a flake order or a non-standard quantity adds time, and the quotation should state it separately. Ask for the dispatch date, not only the lead time. The 1 kg pouch may travel as a parcel and the 25 kg drum on a pallet, and the Incoterm decides who books the freight and who clears the entry. The documents should travel with the lot, not after it, and the pouch should arrive with its seal and its lot code intact. ## What a quotation needs - Product and hydrate. Magnesium chloride hexahydrate, CAS 7791-18-6, with the hydrate written out. - Specification. Assay and its basis, magnesium, water, chloride, particle size, heavy metals and microbiology. - Quantity and pack. 1 kg foil pouch, 25 kg lined drum, or a flake variant. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, specification, SDS, and any market-specific statement the importer needs. - Intended use and market. Supplement, food or another use, and the market where the finished product will be sold. A quotation without the hydrate state is incomplete, because the same trade name covers materials with different magnesium figures and different packs. We do not publish commercial terms on this page; they are stated on the quotation, together with the pack and the lead time. ## The sample is a lot, not a demonstration The 1 kg pack is the qualification sample. Test identity, magnesium, water, chloride and microbiology before scaling, and keep a retained sample from the same pack. The lot code on the sample, the COA and the quotation should match. A sample that cannot be traced to a lot is a demonstration, not a qualification. Weigh the pouch on arrival and inspect the seal. A sample that has gained weight in transit, or whose powder has caked at the fold, is telling you something about the pack rather than the chemistry. If the project needs a smaller quantity for a bench trial, discuss it before ordering; a split from a bulk lot is a repack with its own traceability, not the catalog pack. ## Terms to settle before the first order On a magnesium chloride order, the quotation should pair the trade term, the dispatch window and the 1 kg foil pouch or 25 kg lined drum with the quality terms. Those terms name the revision in force, the per-lot COA with its assay basis and 45–55% water range, the retained sample, the retest date and the change-control route. For this deliquescent hexahydrate, record the liner and in-use expectations too, and route a switch between powder and flake through the quality agreement before production starts. Returns and replacements follow the quotation and the quality agreement. A lot that fails the agreed specification should be handled through the retained sample and a joint re-test, not through a photograph of the powder. Ask which laboratory is acceptable to both sides, and write the answer into the agreement. The product hub carries the catalog specification; the COA page lists the release tests; the stability page explains why the pack matters; the MOQ glossary entry defines the term; the quality page covers the release file. ### 05 The regulatory file for magnesium chloride URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-chloride/compliance/ Reviewed: 2026-11-19 Selling magnesium chloride into a market comes down to four separate questions: what the material is, which route covers it, whether the contaminants fit the finished dose, and whether the label and the claim are allowed. The certificate answers the first only. The buyer's regulatory team confirms the route for the destination, because the additive route and the supplement route are not the same file. In one lineThe specification describes the salt; the regulatory file shows the route, the limits and the label that apply where the finished product is sold. ## The four checks A complete file answers four practical questions. What is the material, and which specification version is being bought? Which lot is being released, and what does its certificate report? Which limits and label rules apply to the finished product? And what changes if the source, the process or the pack changes? The certificate answers the lot question, the technical data sheet answers the specification question, and the safety data sheet answers the handling question. None of them answers the route question on its own. The file should also carry the statements the importer will ask for: allergen and GMO positions, origin, the contaminant results and the packaging description. Name any missing statement before the order, not at the port. A document list with version numbers beats a folder of undated PDFs. ## European Union The EU file is built from the specification, the contaminant results and the label. General food law (Regulation (EC) No 178/2002) sets the framework; labelling follows Regulation (EU) No 1169/2011; contaminants fall under Regulation (EU) 2023/915, which replaced the earlier contaminant regulation; food supplements are covered by Directive 2002/46/EC. The buyer's regulatory team identifies the route for the destination member state and confirms that the form in the specification is the form the file covers. Magnesium chloride can arrive through more than one route. Where the destination classifies it as a food additive, the additive file applies; where it is a mineral source in a supplement, the supplement file applies. The two have different lists, purity expectations and labelling consequences, and the same drum can be filed under one and not the other. That decision belongs to the buyer's team. The nutrition declaration names magnesium in milligrams and as a share of the 375 mg reference intake for adults. The ingredient list names the salt, magnesium chloride, and the hydrate state belongs in the specification behind the label. The current consolidated texts are the reference. ## United States The US file runs through the dietary-supplement framework. The seller has to be able to show that the material is a lawful dietary ingredient for the intended use, and that basis belongs in the supplier file rather than in an assumption. Premarket approval is not part of the route, but the label, the claims and the manufacturing records still are; 21 CFR 111 sets the current good manufacturing practice expectations for a supplement. The Supplement Facts panel declares elemental magnesium against a 420 mg Daily Value for adults and children four years and older, as of this review, while the ingredient list names magnesium chloride. A product that blends two magnesium sources has to name both. A structure/function statement in the US is the brand's statement, not the supplier's, and it carries the DSHEA disclaimer. ## United Kingdom Great Britain and Northern Ireland are checked separately. The GB file uses the current GB register and GB labelling rules; Northern Ireland follows the EU framework. The buyer's regulatory team confirms which of the two applies to the destination and keeps the evidence with the order. ## Contaminants and limits The contaminant panel is a finished-product calculation, not only a drum result. The table below is the usual starting point for a food-supplement file, as of this review; the current destination text and the daily dose decide the final limit. Contaminant limits to confirm for the finished product | Element | EU supplement reference | US reference | What the file should show | Lead (Pb) | 3.0 mg/kg in the supplement as sold | No federal supplement limit; state rules apply | Lot result, method, limit and the finished-dose calculation | Cadmium (Cd) | 1.0 mg/kg | No federal supplement limit | Lot result and any category exception that applies | Mercury (Hg) | 0.10 mg/kg | No federal supplement limit | Lot result and method | Arsenic (As) | No EU-wide supplement figure; national rules vary | No federal supplement limit | The agreed limit, the method and the finished-dose calculation The dilution factor decides whether the raw-material result is enough. Magnesium chloride is often a large share of a capsule or a stick pack, so there is little other mass to absorb its contribution; a raw-material ceiling that looks comfortable on the drum can be close to the finished limit in a high-dose sachet. Run the sum before the first order: multiply the lot result by the salt's share of the serving and compare it with the finished-product limit. Chloride is not a contaminant here; it is the counter-ion and part of the identity. Sulfate and bromide are different: they are plausible companions in a brine or seawater source, they are not in the catalog, and a buyer who needs them controlled should ask for the results and write the ceiling into the specification. ## Label and claims The label names the material, the quantity and the form the destination requires. The claim review is separate: the brand's regulatory reviewer confirms that the wording is allowed for the product, the form and the market. In the EU, magnesium claims are made under Regulation (EU) No 432/2012 and each one carries its own conditions; in the US, a structure/function statement carries the DSHEA disclaimer. Neither market allows a disease-related claim. This page makes no health claim for magnesium chloride. It describes the material, the analytical evidence and the regulatory framework; the claim belongs to the brand that prints it and to the market that authorises it. “The hexahydrate is used in capsules and sticks” describes the ingredient, not a health effect. ## The document pack - Batch certificate covering assay and its basis, magnesium, water, chloride, the contaminant panel and microbiology. - Specification and technical data sheet naming the hydrate, the mesh and the pack. - A safety data sheet in the current format. - Allergen, GMO and origin statements; for an inorganic salt these are statements of absence and source, not risk assessments. - Sulfate and bromide results where the source is brine or seawater. - Packaging and storage statement covering the foil pouch, the drum liner and the humidity limits. - Specification revision and change-control record. ## Checklist before the first order - The hydrate, CAS number and specification version are named. - COA, TDS, SDS, allergen, GMO and origin statements are on file. - The contaminant results are converted to the finished-product dose. - The label and the claim have been reviewed for the destination. - The pack and the storage condition are written into the specification. - The source, process and specification are under change control. The product page carries the catalog specification; the COA page explains the lot certificate; the identity page covers the analytical evidence; the EU regulatory summary gathers the instruments; the quality page describes the release file. ### 06 How we prove a magnesium chloride lot is the hexahydrate URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-chloride/identity/ Reviewed: 2026-11-19 A magnesium chloride lot is the hexahydrate when the document, the magnesium, the chloride and the water agree. The magnesium titration says how much metal is present; the chloride says which anion carries it; the water says which hydrate the crystal is; and the X-ray pattern says which solid phases are in the drum. No single line proves the salt. In one lineIdentity is the magnesium and the chloride agreeing on the same lot, with the water of crystallisation closing the mass balance. ## Five layers, five questions A certificate can name the right material and still fail to prove it. The layers below are separate questions, and each one needs its own evidence. A supplier who answers only the first has described the paperwork, not the powder. Layers of magnesium chloride hexahydrate identity | Layer | Question | Test | What it proves | Document | Is the hydrate named? | Name, CAS number, formula | Paperwork only | Metal | How much magnesium? | Complexometric titration with EDTA | The magnesium, not the salt | Anion | Is the counter-ion chloride? | Argentometric titration or ion chromatography | The chloride | Water | Which hydrate is it? | Karl Fischer titration | The hydrate state and free water | Solid state | Which crystalline phases are present? | X-ray diffraction | The crystal form and crystalline impurities The first layer is necessary and quick. The next four are analytical, and they have to be run on the same lot. A magnesium figure from one batch and a water figure from another describe a hypothetical material, not a drum. ## The 1:2:6 ratio The formula is MgCl2·6H2O: one magnesium, two chlorides and six water molecules. On the theoretical formula that is 11.96% magnesium, 34.88% chloride and 53.17% water, and the mass ratio of magnesium to chloride is 0.343. Those three figures are the identity arithmetic, and they should be consistent on the same certificate. The ratio catches the common substitutions. If the chloride runs high against the magnesium, sodium chloride is the likely addition, because it brings chloride without bringing magnesium. The arithmetic is bounded: at 12.0% magnesium and a water figure near 53%, the powder is essentially all hexahydrate, which carries 34.9% chloride, so a certificate reporting 12.0% magnesium and 40% chloride is internally impossible rather than merely impure. If the chloride runs low against the magnesium, the likely addition is an oxide, a carbonate or a hydroxide, all of which lift the magnesium without lifting the chloride. If the water is low, the crystal is partly dehydrated and the magnesium figure per gram is higher than the hexahydrate's. The water line can also expose a blend. A powder made from the hexahydrate and the anhydrous salt can be formulated to land inside the magnesium range, but its water figure falls below the hexahydrate's, and the ratio moves with it. The magnesium sees the total metal; the water sees the hydrate. Neither sees the whole material alone. The assay basis is a separate question and belongs on the certificate, not in the ratio. The COA page sets out why a 99.0% figure on this hydrate can mean two different numbers. ## X-ray diffraction: the solid-state check X-ray diffraction answers a different question: which crystalline phases are present, and does the pattern match a reference? The hexahydrate has its own pattern, and the anhydrous salt and the lower hydrates have theirs, so a pattern can separate a partly dehydrated lot from a fresh one. It can also show sodium chloride or magnesium oxide as a second phase, which the wet chemistry has to infer from a ratio. XRD is not a purity assay. It sees crystalline phases above its detection limit, not amorphous material and not a thin coating, and the sample preparation changes what the pattern represents. Ask for the reference pattern, the detection limit and the preparation method before reading a “match” statement. The XRD method note explains what the technique can and cannot see. ## What adulteration looks like Substitutions and the signals that expose them | Adulterant | What it does | Signal | Test | Sodium chloride | Cheap chloride; lowers magnesium per gram | Chloride high against magnesium; sodium present | Chloride, sodium by ICP-OES, XRD | Magnesium sulfate | White, bitter, different anion | Sulfate present; chloride low against magnesium | Ion chromatography, XRD | Magnesium oxide or carbonate | Lifts magnesium; lowers water and chloride | Magnesium high; water low; haze in water | XRD, acid test, Karl Fischer | Calcium chloride | Deliquescent; cheaper divalent chloride | Calcium present; magnesium low | ICP-OES, XRD | Water | Raises the water figure; caking | Water above 55%; pouch weight gain | Karl Fischer, weight gain Colour is the weakest signal on a white salt, and a small addition of sodium chloride or magnesium sulfate changes nothing visible. The stronger signals are the chloride-to-magnesium ratio, the water figure, the sodium and calcium results and the diffraction pattern. A certificate that reports appearance and magnesium but not chloride and water has left the most likely substitutions untested. ## How to write the identity into the specification - “Magnesium chloride hexahydrate, CAS 7791-18-6, MgCl2·6H2O.” - “Assay ≥99.0% by complexometric titration, with the basis stated.” - “Magnesium 11.5–12.5%; water 45.0–55.0% by Karl Fischer.” - “Chloride reported against the theoretical 34.9%.” - “Identification by IR and titration; chloride by argentometric titration.” - “XRD reference pattern and detection limit stated where the solid form is tested.” - “No added sodium chloride, magnesium sulfate, magnesium oxide or calcium chloride.” ## Five questions for the supplier - Which hydrate is this lot, and what is the water figure by Karl Fischer? - What is the assay basis, and is the result reported on the hydrate or on MgCl2? - What are the magnesium and chloride figures on the same lot, and by which methods? - Is there a sodium result by ICP-OES and an XRD pattern, and what detection limit does each state? - If the lot is disputed, will you accept a joint re-test on the retained sample? Five direct answers amount to an identity file. A single magnesium percentage does not. The product hub carries the catalog specification; the COA page shows where each figure sits on the certificate; the grade page compares the hydrate forms; the quality page describes the retained-sample workflow. ### 01 What the COA for magnesium lactate actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-lactate/coa/ Reviewed: 2026-11-19 Magnesium lactate is released against a certificate that carries three connected figures: the lactate assay by titration, the elemental magnesium, and the water by Karl Fischer. The catalog specification is 98.0–102.0% assay, 8.5–9.5% magnesium and 18.0–22.0% water, with identification by IR and titration. A certificate that reports only the assay has not shown that the powder is the trihydrate. In one lineThe magnesium figure, the lactate assay and the water only mean something together: the certificate has to close the mass balance for a trihydrate. ## Reading the certificate as a test report A certificate line is only useful when it names the parameter, the method, and the limit the lot was released against. The method column is not decoration. Complexometric titration gives the magnesium figure, Karl Fischer gives the water, and IR plus a titration carries the identification. A “conforms” line without a method leaves the reader nothing to check. The identity line matters because magnesium lactate is sold in more than one hydrate state. The assay line says how much lactate salt is present, the magnesium line says how much metal the powder carries, and the water line says how much of the mass is crystal water. Read together, the three lines describe one solid. Release specification · magnesium lactate trihydrate | Parameter | Method | Release limit | Appearance | Visual | White crystalline powder | Identification | IR and titration | Conforms to the reference | Assay (titration) | Complexometric titration | 98.0–102.0% | Magnesium (elemental) | Complexometric titration | 8.5–9.5% | Water | Karl Fischer | 18.0–22.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh ## Assay, magnesium and water share one arithmetic The catalog ranges are 98.0–102.0% assay, 8.5–9.5% magnesium and 18.0–22.0% water, and they are not independent. The anhydrous salt C6H10MgO6 has a molecular weight of 202.44 and contains 12.01% magnesium by mass. Three water molecules, 54.05, take the trihydrate to 256.49 and 9.48% magnesium; the water is 21.07% of the crystal. Take a powder with 20.0% water and an assay of 99.0% on the anhydrous basis. The dry matter is 80.0%, so the magnesium figure is 0.800 × 0.990 × 12.01% = 9.51%. Move the water to 18.0% and the same assay gives 9.75%, outside the magnesium range. Water and magnesium therefore move in opposite directions: a drier lot reports more metal per gram. The certificate has to state the basis of the assay, because the arithmetic changes if the 98.0–102.0% is expressed on the trihydrate. In that convention the water is already inside the 100%, and a partly dried lot shows its extra magnesium through the water line rather than through the assay. Either way the three rows are one statement, and the buyer can check one against the others before release. Where the assay and the magnesium figure come from the same titration, they are one measurement stated twice, and the water row is the only independent check in the set. ## The limit column and the result column One column sets the acceptance boundary; the other records what the laboratory found. They belong in separate columns with the method beside them. If the result column repeats the range, there is no measurement to audit; “passes” is a conclusion, not a number. What the result column should carry | Parameter | Release limit | What the result column shows | Assay | 98.0–102.0%, with the basis named | A measured percentage and the basis used | Magnesium | 8.5–9.5% | The measured elemental figure | Water | 18.0–22.0% by Karl Fischer | The measured percentage | Heavy metals | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | A figure for each element | Microbiology | Counts and absence tests | The counts and the absence statements | Particle size | ≥95% through 40 mesh | The percentage through the sieve Each metal gets its own figure; a combined total hides which element is present, and this specification is written per element. Microbiology is a count plus an absence statement. The absence of Salmonella applies to the portion tested, so the method and the portion size belong on the sheet. ## What changes between lots Crystallisation and drying set the water. A centrifuge that leaves more mother liquor, or a dryer that runs longer, moves the Karl Fischer result inside the 18.0–22.0% window and pulls the magnesium figure with it. The water line is the first place to look when the magnesium result sits near an edge. Particle size follows the mill and the sieve. The catalog asks for ≥95% through 40 mesh; a change of mill can meet that line and still change how the powder flows on a capsule machine. Colour is a weaker signal: white crystalline powder is a narrow window here, and a grey or yellow cast is worth a question even when the assay passes. One result near an edge tells you less than a trend across four lots. A slow fall in the lactate assay with stable water points at the titration or the standard; a fall that comes with rising water points at the dryer. Certificate, pouch, drum and retained sample should all carry one lot code. ## When an outside laboratory is worth it Reach for an outside laboratory when the source is new, the market is regulated and the shipment is the first, the hydrate is contested, or a certificate line says only “conforms”. The panel is narrow: complexometric titration for magnesium, Karl Fischer for water, IR for identity, lactate by HPLC for the counter-ion, ICP-MS for the listed heavy metals, and the microbiology set. If the hydrate is the dispute, add X-ray diffraction against a reference pattern. If the label claim for elemental magnesium is being set, ask for the magnesium and water results from the same lot so that the as-is figure can be calculated. The laboratory should report its detection limit for each contaminant, because a result without a limit cannot be compared with the release gate. Chain of custody is part of the test. Send the retained sample for testing, and require the report to identify the lot. A contested result needs the retained sample, the certificate and the specification in the referee's hands, plus a request for the test that discriminates between the two explanations, not another run of the same titration. ## Comparing two suppliers Six lines make a comparison: the hydrate state and CAS number; the assay with its basis; the magnesium figure; the water; the contaminant and microbiology results; the pack size and lot code. Two quotations that agree on assay but differ on water are not offering the same powder, and the magnesium figure will show it. The second layer is traceability: who made the lot, which crystallisation and drying route was used, and which mill set the particle size. Catalog ranges are on the magnesium lactate product page. The tests that separate the hydrate states are on the identity page; market files are on the compliance page; the titration is described in the complexometric titration note; the release procedure is set out on the quality page. ### 02 Magnesium lactate trihydrate or anhydrous: choosing a grade URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-lactate/grades/ Reviewed: 2026-11-19 Magnesium lactate is supplied as the trihydrate, as the anhydrous salt, and as a granulated powder for flow. The trihydrate is the catalog form: C6H10MgO6·3H2O, 256.49 g/mol, 9.48% magnesium and 21.07% water. The anhydrous salt carries 12.01% magnesium, so the same label claim needs about a fifth less powder. In one lineThe hydrate is a mass decision: the trihydrate carries about 9.5% magnesium against about 12.0% for the anhydrous salt, so the same claim needs more powder. ## Why the hydrate comes first Magnesium lactate is one magnesium ion and two lactate ions. In the trihydrate, three water molecules sit in the crystal as well, and they are part of the solid rather than a drying fault. The commercial powder is normally this crystal because it is the form that crystallises cleanly and keeps its water at ambient conditions. The anhydrous salt is the same lattice without the water, made by drying the hydrate. It is a legitimate material with its own specification, and it is hygroscopic: left open in a humid room it takes water back and moves toward the hydrate. Granulation is a physical step applied to either solid; it changes the particle size and the flow, not the hydrate. CAS 18917-93-6 is the number quoted here for the trihydrate. A purchase order that says only “magnesium lactate” has not named the solid, and the certificate cannot settle the question after the fact if the specification never asked it. ## The two hydrates side by side Magnesium lactate trihydrate and the anhydrous salt | Property | Trihydrate | Anhydrous | Formula | C6H10MgO6·3H2O | C6H10MgO6 | Molecular weight | 256.49 | 202.44 | Magnesium | 9.48% | 12.01% | Water | 21.07% in the crystal | None in the formula | Powder for 100 mg magnesium | About 1,055 mg | About 833 mg | Magnesium in a 500 mg fill | About 47 mg | About 60 mg | Water solubility | Freely soluble | Freely soluble | Handling | Stable crystal; keep sealed | Takes water from humid air; reseal The 18.0–22.0% water range in the catalog belongs to the trihydrate. A lot at 21% water and 9.5% magnesium is a normal trihydrate, not a wet lot. An anhydrous grade would be specified with a low water limit and a magnesium figure near 12%, and it should never be accepted against the trihydrate specification merely because the assay is higher. ## Water, flow and the mill The catalog form is a white crystalline powder at ≥95% through 40 mesh. Granulation makes a coarser, denser particle that flows more evenly and raises less dust, and it is quoted as a separate item because the particle-size line moves. The magnesium figure does not move with granulation; if a supplier offers a granulated grade with a different assay, that is a new specification rather than a packing option. Both hydrates are freely soluble in water, and the lactate solution is close to neutral. That is why the salt suits sticks, drink mixes and any format where the powder has to disappear into water. The difference is in the powder room: the anhydrous grade pulls moisture from the air, so an open liner, a humid filling room or a long hold in a hopper all work against it. Caking is the practical failure. A trihydrate stored at the dry end of its water range can lose surface water and cake at the bag seams; an anhydrous grade stored humid can gain water and cake throughout. The fix is the pack and the room, not a different hydrate. Ask for the water result on the lot and keep the liner closed between uses. ## The dose arithmetic The label declares elemental magnesium; the powder mass is the carrier. Divide the claimed magnesium by the magnesium fraction of the grade. At 9.5%, a 100 mg claim needs 1,053 mg of trihydrate; at the bottom of the range, 8.5%, it needs 1,176 mg. The same claim on the anhydrous salt at 12.0% needs 833 mg. Per capsule, the difference is visible. A 500 mg fill of trihydrate delivers about 47 mg of magnesium, while the same fill of anhydrous salt delivers about 60 mg. A 100 mg claim needs about 833 mg of the anhydrous salt or 1,055 mg of the trihydrate, so whether it fits one capsule depends on the bulk density; the trihydrate more often needs two capsules or a stick. A 200 mg claim is 2,105 mg of trihydrate, which is a stick pack or a tablet rather than a single capsule. These figures are planning arithmetic from the formula, not a release result. The lot certificate, not the catalog midpoint, is what the capsule machine or the press should be set against: a low-magnesium lot needs a heavier fill. The calculation is the same one that decides the fill weight, and the fill weight is what the label claim has to survive. ## What to write into the specification - “Magnesium lactate trihydrate, CAS 18917-93-6, C6H10MgO6·3H2O.” - “Assay 98.0–102.0% by complexometric titration; the basis is stated on the certificate.” - “Magnesium 8.5–9.5%; water 18.0–22.0% by Karl Fischer.” - “Identification by IR and titration; appearance white crystalline powder.” - “Particle size ≥95% through 40 mesh; granulated grade quoted with its mesh and bulk density.” - “Heavy metals and microbiology as listed; lot code on the pack and the certificate.” ## When the other grade is wrong Do not switch an approved trihydrate formula to the anhydrous salt without recalculating the dose. The label claim stays the same, the powder mass falls, and the capsule size or the tablet weight may fall with it; that is a change control, not a purchasing convenience. The reverse switch is worse: a formula built on 833 mg of anhydrous salt cannot absorb 1,055 mg of trihydrate without a bigger capsule. Do not read the trihydrate's 21% water as a quality defect. It is the crystal. A specification that asks for “low water” on a trihydrate is asking for a different solid, and a supplier who meets it has either dried the hydrate or supplied the anhydrous salt. Granulation is the right answer when flow or dust is the problem, and the wrong answer when the magnesium figure is the problem. The product hub carries the catalog ranges; the COA page shows where water and magnesium sit on the certificate; the lactate versus citrate comparison takes the salt choice further; the stability page covers what the powder does in the pack; the hydrate glossary entry defines the term. ### 02.1 Magnesium lactate vs citrate: solubility, magnesium and the fill URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-lactate/grades/magnesium-lactate-vs-citrate/ Reviewed: 2026-11-19 Magnesium lactate and magnesium citrate are both magnesium salts, but they trade in opposite directions. The lactate trihydrate is freely soluble and carries 9.48% magnesium; the citrate carries 11.89% as the nonahydrate or 16.16% as the anhydrous salt and dissolves less readily. For the same magnesium claim the lactate needs the larger fill, and for a clear drink the citrate may not dissolve. In one lineThe lactate dissolves more readily and carries less magnesium than the citrate, so the choice trades solution clarity against fill weight. ## Two salts, two formulas The lactate is one magnesium ion and two lactate ions, with three water molecules in the commercial crystal. The citrate is three magnesium ions and two citrate ions; it is sold anhydrous or as the nonahydrate, and the hydrate state changes the magnesium figure before the salt comparison begins. A quotation that says only “magnesium citrate” has left the same gap as one that says only “magnesium lactate”. The two salts on a common basis | Salt | Formula | Molecular weight | Magnesium | Water | Powder for 100 mg magnesium | Magnesium lactate trihydrate | C6H10MgO6·3H2O | 256.49 | 9.48% | 21.07% | About 1,055 mg | Magnesium citrate nonahydrate | Mg3(C6H5O7)2·9H2O | 613.25 | 11.89% | 26.44% | About 840 mg | Magnesium citrate, anhydrous | Mg3(C6H5O7)2 | 451.11 | 16.16% | None in the formula | About 619 mg The percentages come from the formulas, so the table is planning arithmetic rather than a lot result. A lactate lot at the bottom of its 8.5–9.5% range needs about 1,176 mg for 100 mg of magnesium, not 1,055 mg; the certificate for the lot is what the fill calculation should use. ## Solubility and the drink Magnesium lactate is freely soluble in water and gives a solution close to neutral. That combination is why it suits sticks, drink mixes and ready-to-drink formats: the powder disappears at ambient temperature, and the salt does not drag the drink's pH with it. The citrate is markedly less soluble. A concentrated citrate solution can leave a cloudy suspension or a sediment, which is the practical reason a clear, high-dose drink usually starts with the lactate. Solubility is not the same as dissolution rate. A fine citrate powder can dissolve acceptably in a large volume of water while still failing in a 200 mL stick, and a coarse lactate powder can be slow even though its equilibrium solubility is high. Test the salt in the actual volume and at the actual temperature, not in a beaker of warm water. For a capsule or a tablet, solubility hardly matters. The powder is swallowed, not dissolved, and the fill weight is decided by the magnesium figure and the powder's bulk density. That is where the citrate's higher magnesium content starts to win. ## What the magnesium figure buys Per gram of powder, the citrate carries more magnesium than the lactate: about 12% for the nonahydrate and 16% for the anhydrous salt, against 9.5% for the lactate trihydrate. Per 100 mg of magnesium, the lactate needs about 1,055 mg of powder, the citrate nonahydrate about 840 mg and the anhydrous citrate about 619 mg. The gap between the lactate and the anhydrous citrate is more than 400 mg per dose. The comparison must be made on the same hydrate basis. Anhydrous citrate at 16.16% against lactate trihydrate at 9.48% is a fair comparison of two commercial solids; citrate nonahydrate at 11.89% against the lactate is the comparison for two hydrates. Mixing the bases produces a magnesium figure that belongs to neither product. ## The fill and the dosage form A 500 mg capsule fill delivers about 47 mg of magnesium from the lactate, about 59 mg from the citrate nonahydrate and about 81 mg from the anhydrous citrate. A 100 mg claim therefore fits one capsule on the anhydrous citrate at a typical fill, while the lactate needs two capsules or a larger capsule. A 200 mg claim is about 2,105 mg of lactate, which is a stick pack, a tablet or several capsules; the same claim on the anhydrous citrate is about 1,238 mg. Fill weight is only half the calculation. The powder's bulk density decides whether that mass fits the capsule, and the density varies with the hydrate, the mill and the granulation. Ask for the bulk density of the lot as well as the magnesium figure, and run the fill trial on the powder that will be bought. A formulation that fits on paper can fail on the machine because the powder is lighter than the planning figure. Tablets have a different ceiling: a 1,000 mg tablet is already large for most consumers, so a 100 mg magnesium claim on the lactate is at the edge of a single tablet before any excipient. A stick or sachet has room for the extra mass, so the lactate's lower magnesium figure costs less there. ## What the label has to say The ingredient list names the salt, and the nutrition panel declares the elemental magnesium. Those are two different numbers. A product that declares 100 mg of magnesium from magnesium lactate contains about 1,055 mg of the salt, not 100 mg; a label that puts the salt mass in the magnesium line overstates the mineral by a factor of ten. In the EU, the nutrition declaration gives magnesium in milligrams and against the 375 mg reference intake, while the ingredient list names magnesium lactate or magnesium citrate. US labelling puts the elemental magnesium in the Supplement Facts panel against the Daily Value and the salt name in the ingredient list. In both markets, a change of salt is a label change even when the elemental magnesium claim stays the same. A blend of the two salts is allowed and is sometimes the practical answer: the lactate carries the solubility and the citrate carries the density. Each salt is named in the ingredient list, and the elemental magnesium is the sum of the contributions. The blend has to be validated as a blend, not assumed from the two certificates. ## When to choose which - Choose the lactate for a clear drink, a stick pack or a formula where the magnesium dose is moderate and the solution has to be clean. - Choose the citrate, preferably the anhydrous grade, when the capsule size or tablet weight cannot change and the magnesium dose is high. - Choose a blend when solubility and fill weight both matter, and validate the blend's uniformity. - Do not switch salts on the certificate alone; recalculate the salt mass, the fill and the label, and record the change. The magnesium lactate product page carries the trihydrate specification; the magnesium citrate page carries the citrate grades; the magnesium chloride page covers the most soluble salt in the range and its own pack problem. The grades page compares the lactate hydrates, the COA page shows how the magnesium and water are reported, and the complexometric titration note describes the assay. ### 03 Magnesium lactate stability: water, caking and the pack URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-lactate/stability/ Reviewed: 2026-11-19 Magnesium lactate is chemically robust: there is no oxidation or photolysis step that sets its shelf life. The variables are the crystal water, the moisture the pack lets in, and the microbiology of any solution. A sealed powder holds its assay and its water for a long retest period; a drink needs a preservative system and a validated hold, not a darker bottle. In one lineMagnesium lactate is a stable salt; the variables are the water in the crystal, the moisture in the pack and the microbiology of any solution. ## The powder: water in, water out The trihydrate carries 21.07% water in the crystal, and the catalog allows 18.0–22.0%. That range is a composition window, not a moisture allowance. A lot stored in a very dry room can lose a little surface water and report at the low end; a lot stored humid can wet the surface and report at the high end. Either move changes the water result and, with it, the magnesium figure per gram. Neither is a chemical degradation. The salt is not deliquescent in the way magnesium chloride is, but it is freely soluble, so condensed water on the powder is the practical risk. A drum brought from a cold vehicle into a warm filling room will sweat on the inside of the liner. Let the pack equilibrate before opening it, and keep the liner closed between uses. Caking at the seams of an opened bag is the visible result of that condensation. There is no oxidation pathway to manage and no photolysis, so a dark store and an amber container are not the controls here. The controls are the seal, the humidity and the temperature history. A yellow or grey cast on a white crystalline powder is not normal aging; it is a question for the supplier. ## The solution: microbial, not chemical Magnesium lactate dissolves freely and gives a nearly neutral solution. Lactate is a carbon source, so a solution is a growth medium unless something stops growth. A preservative system, a validated hold time and a sealed pack do that work; a sterile fill without a preservative protects the product only until the consumer opens it. The salt itself tolerates a normal heat process, so the risk in a beverage is microbiology and physical stability rather than hydrolysis of the salt. Concentration is the other solution variable. A stock held near saturation can crystallise when the store cools, and the crystals redissolve slowly. Keep the working concentration below the solubility at the lowest temperature the solution will see, and check the appearance after a cold hold. A pH move toward acid converts some lactate to lactic acid, which stays soluble; a move toward alkaline can cloud the solution, so the matrix pH belongs in the validation. ## What drives change during storage Factors that move magnesium lactate during storage | Factor | What it does | Control | Crystal water | Water result drifts; magnesium per gram moves with it | Sealed pack; record water at release and retest | Humidity | Surface wetting, caking and dissolution at the seams | Moisture-barrier liner; dry store; reseal | Temperature cycling | Condensation inside the pack; caking | Equilibrate before opening; stable store | Microbiology | Growth in solution; spoilage and safety risk | Preservative system; validated hold; sealed pack | pH | Clouding at alkaline pH; lactate speciation at acid pH | Validate the matrix pH and the hold | Pack seal | A pinhole or a folded pouch defeats the barrier | Seal inspection; liner; in-use instructions These factors overlap. A warm, humid store condenses water inside a pouch and wets the powder; a solution at neutral pH with no preservative grows on the shelf. Ask which pack and which matrix are being relied on, not whether the salt is stable in the abstract. ## A stability protocol for the ingredient Write the pack, the condition, the time points and the test panel into the protocol before the first sample goes in. Run long-term samples at 25 °C/60% relative humidity and intermediate samples at 30 °C/65%, then add 40 °C/75% to stress the pack. A light-exposure arm adds little for this salt, because there is no photolysis pathway, but a solution arm matters for any liquid or stick application. Test assay, magnesium, water, appearance and microbiology at each point. For a powder, test it in the pack that will be sold, not in a laboratory jar; the liner and the headspace are part of the result. For a stick or a beverage, repeat the work in the matrix at the process pH and heat load, and test the sealed unit rather than the bulk powder. Report each time point as a number rather than a tick, and name the pack, the lot family and the laboratory. Data from a 25 kg drum does not transfer to a 1 kg pouch: the surface-to-volume ratio, the headspace and the opening history all change. ## The finished formula changes the answer Capsules and tablets run at low water activity, yet the shell and the excipients can still hand moisture to the fill. Check the water and the appearance at release and after storage, and check that the fill has not softened or stuck to the shell. A tablet made with a freely soluble salt is also sensitive to the humidity of the packing room, not only to the store. A stick pack depends on the foil and the seal. The powder inside is protected until the stick is opened, so the in-use exposure is short; a pinhole in the seal is the failure that matters. A ready-to-drink product combines a heat process, a preservative decision and a shelf life in the bottle, and none of those is answered by the bulk-powder data. A gummy or a chew brings water activity and pH together with a matrix that can migrate moisture. The salt is soluble and stays in solution; the risk is the matrix, not the salt. Validate the finished unit. ## How the shelf life is set There is no single shelf-life figure for magnesium lactate: the pack and the storage condition decide it. The retest period goes into the specification only when the stability file for that pack and condition supports it. A figure quoted without those three is marketing, not shelf life. After the retest period, re-test the retained sample for assay, magnesium and water before extending use. Never extend a period by guesswork, and never carry a drum figure over to a repack. Standard packs are listed on the product hub; release tests are on the COA page; pack and lead time are on the MOQ page; the count and absence tests are described in the microbiology note; the release procedure is set out on the quality page. ### 04 Magnesium lactate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-lactate/moq/ Reviewed: 2026-11-19 Magnesium lactate is sold from a 1 kg foil pouch, with a 25 kg fiber drum as the bulk pack; the standard lead time is 1–7 days. To compare quotations, a buyer needs six details: the hydrate and CAS number, the specification, the quantity and pack, the destination and Incoterm, the documents, and the market where the finished product will be sold. The minimum is set by the pack and its lot code, not by a volume target. In one lineOne kilogram is the minimum because a lot code, a retained sample and an identity test all need a pack of their own. ## Why the minimum is 1 kg One pouch can supply a bench trial, a retained sample and an outside test, and all three can come from the same lot. That is the point of the minimum: the pack carries a lot code and is sold as a unit, so the material that was tested is the material that was bought. At a 500 mg capsule fill, 1 kg makes roughly two thousand capsules, enough for a pilot run and a stability arm. Under 1 kg, the usual practice is to split a larger lot and repack it. The split adds handling and loses the original pack identity, and a dispute becomes harder to settle; the chemistry does not change. A bench quantity is agreed before the order, not assumed afterwards. The drum cuts handling per kilogram and the number of packs to open, at the cost of inventory, a longer storage period and a dry space for a pallet. The minimum is not a volume incentive; it is the smallest unit that can carry a lot through sampling, release and retention. ## Packs and formats Standard magnesium lactate packs | Format | Net content | Where it fits | Practical note | Foil pouch | 1 kg | Trial and small runs | Foil laminate; close it again after use | Fiber drum | 25 kg | Production | Liner inside; code on drum and liner | Granulated powder | 1 kg or 25 kg | Flow and dust control | Mesh and density quoted per order The catalog powder is ≥95% through 40 mesh. Granulation is a separate item because it changes the particle profile, the flow and sometimes the bulk density, and those numbers belong on the quotation. It is not a third hydrate: the magnesium figure and the water are unchanged, while the way the powder runs on a capsule machine or a stick filler is not. ## Lead time and the dispatch date For the standard pack, allow 1–7 days from confirmation of the order. Picking, documents and dispatch sit inside that window; freight, customs and the customer's own release do not. A custom granulation, a non-standard pack or a specification change adds time, and it should be priced and dated separately rather than hidden inside the standard figure. Get a dispatch date as well as a lead time. The pouch moves as a parcel, the drum as a pallet, and the Incoterm allocates the freight booking and the customs entry. Documents should travel with the lot; a drum that arrives before its certificate waits in quarantine. ## Six details for a comparable quotation A quotation is comparable when it carries six details: - Product and hydrate. Magnesium lactate trihydrate, CAS 18917-93-6, with the hydrate written out rather than implied. - Specification. Assay with its basis, magnesium, water, particle size and the contaminant panel. - Quantity and pack. The pouch (1 kg), the drum (25 kg), or a granulated grade with its mesh and bulk density. - Destination and Incoterm. The delivery country and point, plus the agreed trade term. - Documents. The COA, the specification, the SDS and any statement the importer's market requires. - Use and market. Supplement, food or another application, and the country where the finished product will be sold. A quotation that omits the hydrate or the market is incomplete. Suitability is destination-specific, and the paperwork is part of what is being offered. Commercial terms sit on the quotation, not on this page. ## The sample has to be traceable to a lot The 1 kg pouch is what a customer qualifies. Before scaling, test identity, assay, magnesium, water and microbiology, and retain a sample from the same pack. Sample, certificate and quotation should carry the same lot code. Without a lot code, a sample is a demonstration and not a qualification. A smaller bench quantity has to be agreed before the order, not after. A split is a repack: it has its own traceability and should be labelled as a repack, not passed off as the catalog pack. Never assume the bench sample and the production drum share a lot; check the documents. ## Terms to agree before the first order Commercial terms, Incoterm, pack, lead time and documents are fixed by the quotation. Quality terms sit alongside: which specification revision applies, the COA per lot, retention, the retest period and change control. Sign a quality agreement before the first production order; after a dispute is too late. Replacements and returns are governed by the quotation and that agreement. If a lot fails, work from the retained sample and a joint re-test rather than a photograph. Agree in advance which laboratory can act as referee and who carries that cost. Catalog ranges are on the product hub; release tests on the COA page; market files on the compliance page; the term itself in the MOQ glossary; shipping and documents on the logistics page; the release file on the quality page. ### 05 The regulatory file for magnesium lactate URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-lactate/compliance/ Reviewed: 2026-11-19 Magnesium lactate is the magnesium salt of lactic acid, and the regulatory file is built around the finished product rather than the drum alone. The buyer's regulatory team confirms the route for the destination: a food supplement that supplies magnesium and a food additive are different files with different conditions. This page sets out the framework, the limits and the papers a buyer should hold, so the specification and the destination can be checked side by side. In one lineA magnesium salt can enter a market as a supplement source or as an additive, and only the destination's current text says which file applies. ## What a complete file holds Four questions define a complete file. Which material, and which revision of the specification, is being bought? Which lot does the certificate describe? Which route fits the finished product in the destination, and what limits and label rules follow from it? And what has to be reopened when the source, process or pack is changed? The COA covers one lot, the TDS covers the specification, and the SDS covers handling. None of the three establishes a market route. A supplier who offers a certificate as a regulatory approval has confused a lot document with a market authorisation. Route is a property of the finished product, its dose and its destination, and the buyer's regulatory team is the party that confirms it. Allergen and GMO statements, the country of origin, a residual-solvent statement where one is relevant and a change-control policy belong in the same folder. Keep a dated document index: undated PDFs cannot be audited. The specification version on the quotation should be the version in the file. ## European Union The EU framework starts with general food law, Regulation (EC) No 178/2002, and adds the labelling rules of Regulation (EU) No 1169/2011 and the contaminant limits of Regulation (EU) 2023/915. Where the finished product is a food supplement, Directive 2002/46/EC applies, and the nutrition declaration gives magnesium in milligrams, with a percentage of the reference intake beside it. The directive also leaves member states room to set maximum levels for vitamins and minerals in supplements, so the destination country's national rule is checked as well as the EU text. Where the destination regulates the material as a food additive rather than a supplement ingredient, Regulation (EC) No 1333/2008 and its lists are the texts to check, and the permitted use and level are set there. A route is not a property of the powder: one lot can fit one file and fall outside another. Check the consolidated text as it stands, because a summary can lag the instrument. The EU has no single maximum for magnesium in supplements; EFSA's tolerable upper intake level for supplemental magnesium is 250 mg/day for adults, and it is a risk-assessment value rather than a product limit. The finished-product dose and the national rule decide what may be sold and declared. ## United States In the United States, the starting point is the dietary supplement route: the ingredient is named on the Supplement Facts panel, the finished product is made under 21 CFR 111, and the label and claims are reviewed against the dietary-supplement rules. Magnesium is declared as the elemental amount against its Daily Value, while the ingredient list names the salt. If the ingredient is new for the purpose, the new-dietary-ingredient route and its notification apply; the buyer's team confirms whether that route is needed for this material and this use. The supplier's job is to identify the basis it depends on and to point to the supporting document. A certificate does not establish the route, and a statement that the material is “generally recognised” is not a substitute for the document that the destination requires. ## Contaminants and limits The catalog limits below are release gates for the ingredient. They are not automatically the finished-product limits; the daily dose and the destination text decide the final figure, and the calculation has to be shown in the file. Contaminants to check against the finished-product dose | Parameter | Catalog release limit | Evidence to keep | Lead (Pb) | ≤3 mg/kg | Lot result, method and the finished-product calculation | Arsenic (As) | ≤2 mg/kg | Lot result and the agreed limit for the market | Cadmium (Cd) | ≤1 mg/kg | Lot result and any category exception | Mercury (Hg) | ≤0.1 mg/kg | Lot result and method | Microbiology | Counts and absence tests | Counts, absence statements and the test portion The contaminant result is reported per element, not as a total, and the method and detection limit belong beside it. A finished-product calculation that divides by the dose assumes the dose is fixed; if the label claim or the serving size changes, the calculation is repeated. ## Label and claims In the EU, the register of authorised health claims carries magnesium claims worded around normal muscle function, normal energy-yielding metabolism, the normal function of the nervous system and the reduction of tiredness and fatigue. A “source of magnesium” claim rests on a significant amount: 15% of the 375 mg reference intake is about 56 mg, in the quantity the regulation specifies. The wording on the pack is the register wording, not a paraphrase, and the brand's reviewer confirms that the claim and the dose meet the condition. In the United States, a structure or function statement about magnesium is allowed with the required disclaimer, while a disease claim is not. Neither market lets a certificate authorise a claim, and no claim rewrites the specification. The label names the salt and declares the elemental magnesium; the two are not the same number. ## Documents that belong in the file - Specification with the hydrate state, CAS number and version. - Certificate of analysis for the lot, with the magnesium and water results. - Technical data sheet and safety data sheet. - Allergen and GMO statements, and the country of origin. - Contaminant and microbiology results with methods and limits. - A statement of the regulatory basis the supplier relies on, and the change-control policy. The file is reviewed as a set. A certificate without the specification it was released against cannot be audited, and a specification without a version number cannot be controlled. Catalog ranges are on the product hub; the certificate layout is on the COA page; the analytical evidence is on the identity page; framework references are in the EU note and the US note; the release file is described on the quality page. ## Checklist before the first order - Hydrate, CAS number and specification revision are recorded. - The route has been signed off by the buyer's regulatory team. - Contaminants are recalculated at the finished-product dose. - Destination labelling and claims have been reviewed. - Allergen, GMO, origin and change-control papers are in the folder. - One version number runs through quotation, specification and certificate. ### 06 How we prove a magnesium lactate lot is the trihydrate URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-lactate/identity/ Reviewed: 2026-11-19 A magnesium lactate lot is the trihydrate when five measurements agree: the document names the hydrate and the CAS number, IR matches the reference, the magnesium titration is 8.5–9.5%, the lactate figure is about 69%, and the water is 18.0–22.0%. The assay alone cannot tell the trihydrate from the anhydrous salt, a magnesium oxide blend or a sulfate blend. The magnesium-to-lactate ratio and the water close the mass balance. In one lineIdentity is the agreement of the magnesium figure, the lactate figure and the water: one magnesium for every two lactate ions, with the trihydrate's water in the balance. ## The five identity layers A certificate can carry the right name and still fail to prove the powder. Each layer asks a different question and needs its own evidence. An answer to the first alone describes the paperwork, not the powder. Five layers of magnesium lactate identity | Layer | The question | Method | What it establishes | Document | Is the hydrate named? | Name, CAS number, formula | Paperwork only | Infrared | Is the salt magnesium lactate? | IR against a reference spectrum | The salt family | Magnesium | How much metal is present? | Complexometric titration | The elemental figure | Lactate | Is the counter-ion lactate, and in the right ratio? | HPLC | The anion and the stoichiometry | Water | Is it the trihydrate? | Karl Fischer | The hydrate state The order matters. The document layer can be corrected with a new certificate; the analytical layers cannot. If the IR matches and the magnesium is in range but the water is 2%, the powder is the anhydrous salt or a partly dried lot, and the name on the certificate is the thing that is wrong. ## One magnesium for every two lactate ions The salt is one magnesium ion and two lactate ions. The theoretical magnesium figure for the trihydrate is 9.48%, and the lactate figure that goes with it is 69.45%; the remaining 21.07% is water. The mass ratio of lactate to magnesium is about 7.3, and the molar ratio is 2.0. Both ratios hold for the anhydrous salt as well, because removing water does not change the salt: the anhydrous solid is 12.01% magnesium and 88.0% lactate, and its ratio is still 7.3. That makes the ratio a check on the salt, not on the hydrate. A powder with 9.5% magnesium and 60% lactate has too little anion for the metal, so part of the magnesium is not bound to lactate. A powder with 9.5% magnesium, 69% lactate and 10% water has the right salt but too little water for the trihydrate. A powder with 12% magnesium, 88% lactate and 0% water is the anhydrous salt, correctly described. The three figures together say which solid is in the bag. Work the arithmetic before accepting a “magnesium lactate” certificate. Divide the magnesium percentage by 24.305 to get moles of metal per 100 g: 9.48 ÷ 24.305 = 0.390. Multiply by two and by 89.07 to get grams of lactate per 100 g, 69.5 g, and add the water percentage. The total should land close to 100% for a pure salt. A total well below 100% means a filler or a second salt; a total above 100% means one of the three figures is wrong. ## X-ray diffraction and the crystal form XRD asks whether the solid is the crystalline trihydrate and whether the pattern matches a reference. It separates the trihydrate from the anhydrous salt and from an amorphous blend, and it can show a partly dried lot that contains both patterns. XRD is neither a purity assay nor a counter-ion measurement. This is not a routine release test. Order it when the hydrate is contested, when qualifying a new source, or when the water sits at the edge of the range and the magnesium is ambiguous. Before accepting a “match” statement, require the reference pattern and the limit of detection; a bare “XRD conforms” line proves little. On a contested lot, combine XRD, Karl Fischer and the two assay figures rather than relying on one. ## How substitution shows up Common substitutions in magnesium lactate and what they leave behind | Substitute | Effect | Clue | Check | Anhydrous salt | Raises magnesium; removes water | Mg above 9.5%; water below 18% | Karl Fischer, XRD | Magnesium oxide | High magnesium; no lactate; alkaline | Mg high; lactate low; cloudy solution | Titration, HPLC, pH | Magnesium sulfate | Magnesium close to the lactate figure; no lactate | Sulfate present; lactate low | Sulfate test, HPLC, IR | Magnesium citrate | Higher magnesium; citrate present | Citrate by HPLC; different solubility | HPLC, IR | Maltodextrin | Dilutes every figure | Low Mg and low lactate; high dry matter | Mass balance, HPLC The sulfate row is the one that surprises buyers. Magnesium sulfate heptahydrate carries 9.9% magnesium, close enough to the 9.5% of the trihydrate that a magnesium-only specification will not separate them. The lactate figure and a sulfate test will. Appearance tells you least: a white powder is easy to imitate, and a blend can look right while the ratios are wrong. ## Writing identity into the specification - “Magnesium lactate trihydrate, CAS 18917-93-6, C6H10MgO6·3H2O.” - “Assay 98.0–102.0% by complexometric titration; the basis is stated on the certificate.” - “Magnesium 8.5–9.5%; water 18.0–22.0% by Karl Fischer.” - “Identification by IR against a reference spectrum and by titration.” - “Lactate by HPLC; report the figure so the magnesium-to-lactate ratio can be checked.” - “Particle size ≥95% through 40 mesh; contaminants and microbiology per the certificate.” ## Five questions to put to the supplier - What hydrate is this lot, and what CAS number appears on its certificate? - What are the magnesium, lactate and water results for the lot, and do they close the mass balance? - Will you release the IR spectrum and the HPLC chromatogram alongside the assay figure? - What is the water by Karl Fischer, and was the assay reported on the anhydrous or the trihydrate basis? - If the hydrate is contested, will you join a re-test on the retained sample, with XRD included? Five straight answers make an identity file; a single assay figure does not. Catalog ranges are on the product hub; the certificate layout is on the COA page; the hydrate comparison is on the grades page; the salt comparison is on the lactate versus citrate page; the solid-state methods are described in the FTIR note and the XRD note. ### 01 What the COA for magnesium gluconate actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-gluconate/coa/ Reviewed: 2026-11-19 A magnesium gluconate certificate carries a short panel: appearance, identity, assay, elemental magnesium, water, the contaminant panel and the physical result. Read together they answer two different questions — is this the gluconate, and how much of it is in the drum — and each line is only useful when it names its method and the limit it was judged against. The values here are the catalog specification; the lot certificate is the document that fixes a particular pack. In one lineThe certificate proves the lot in two directions: the titration fixes the magnesium, the infrared spectrum fixes the gluconate, and the water figure closes the mass balance. ## Reading the certificate row by row A reviewer should be able to follow every row from the sample number to the result without asking a question. Three things make that possible: the parameter, the method that produced the figure, and the limit it was judged against. A row that reports “conforms” and nothing else has replaced evidence with a verdict. Identity and assay do different jobs, and a certificate needs both. Identity establishes that the anion is gluconate rather than another acid; the assay establishes how much magnesium gluconate the lot contains. A high assay with no anion evidence can describe a blend as easily as it describes the salt. Release panel for magnesium gluconate | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | Infrared spectrum; complexometric titration | Conforms to the reference | Assay | Complexometric titration (EDTA) | 98.0–102.0% | Magnesium | Complexometric titration (EDTA) | 5.5–6.0% | Water | Karl Fischer | ≤1.0% | Heavy metals | ICP-MS | Pb ≤3 · Cd ≤1 · As ≤2 · Hg ≤0.1 mg/kg | Microbiology | Plate count; pathogen enrichment | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent | Particle size | Sieve test | ≥95% through 40 mesh ## The basis, the water and the magnesium cross-check Any percentage needs a denominator. The catalog range is 98.0–102.0%, and the certificate has to say whether that was measured on the powder as it arrived or on the dried substance. Water is capped at 1.0%, so the two readings sit within about a point of each other — enough, though, to decide a borderline lot: 99.0% as received with 0.9% water becomes 99.9% once the water is taken out. The formula gives the second line its expected value. Magnesium accounts for 24.305 g/mol of the 414.60 g/mol that make up the salt, which is 5.86%. An assay between 98.0% and 102.0% therefore implies magnesium between 5.74% and 5.98%. A lot reported at 99% assay and 5.5% magnesium is not one powder described twice, even if each figure has its own range on the sheet. When both numbers come from the same EDTA titration they are not independent measurements, and the cross-check tests the laboratory's arithmetic and its basis rather than the material twice. Ask which weighed portion and which dilution were used for each calculation if the two figures sit far apart. ## Limit, result and the space between them A limit is a boundary; a result is a measurement. A certificate that prints the specification range in the result column has told the reader nothing about the lot, and the practice is common enough to be worth checking first. Result column · what belongs beside each limit | Parameter | Release limit | Result column | Assay | 98.0–102.0% | A measured percentage, with the basis stated | Magnesium | 5.5–6.0% | A measured percentage on the same lot | Water | ≤1.0% | A measured percentage by Karl Fischer | Heavy metals | Per element | The measured figure in mg/kg for each metal | Microbiology | Counts and absence | The plate count plus the absence statement | Particle size | ≥95% through 40 mesh | The sieved percentage for this lot One summed “heavy metals” number hides the element that matters, and one pass-or-fail microbiology line hides whether the count was 20 cfu/g or 900. The reader should be able to rebuild the verdict from the page, which is the point of printing results rather than conclusions. ## Batch-to-batch variation The salt is made by fermenting glucose to gluconic acid, neutralising it with a magnesium source, then crystallising, drying and milling. Variation enters at each of those steps. Neutralisation and crystallisation shift the assay and the colour, the dryer shifts the water, and the mill shifts the sieve result. Appearance is a soft line and a useful one. White to off-white tolerates a wide range, so movement inside it is not a rejection. A grey or yellow cast may follow a change of magnesium source or a dryer that ran hot, and the assay can still pass. The batch record answers that question faster than a colour chart. Look at the direction of travel across several lots rather than at a single figure: magnesium creeping down, water creeping up, or a new absorption band in the infrared. The lot code should be the same on the certificate, the pack and the retained sample, or the trail stops at the laboratory door. ## Outside testing, and when it earns its cost A new source, a first consignment into a regulated market, a form under dispute, or a blend that behaves oddly: those are the occasions for an independent laboratory. The panel can be short. EDTA titration gives magnesium and the salt figure, infrared comparison gives the anion, Karl Fischer gives water, ICP-MS gives the metals, and a plate count gives the microbiology. Add diffraction when a second crystalline magnesium salt is plausible. Every screen should come with a detection limit. Without one, “not detected” speaks about the reach of the method rather than the sample. Keep the chain of custody intact: the powder that was tested should be the powder that was retained, and the report should say which lot it belongs to. If a result is disputed, the referee test worth paying for is the one that separates the two claims — a spectrum, a diffractogram, a water figure — not a second pass through the same titration. ## Two suppliers, side by side Six lines make the comparison: name and CAS number; assay and its basis; magnesium on the same lot; water; contaminants and microbiology; pack and lot code. Suppliers can match on assay while describing different powders, and the basis or the magnesium figure is usually where the difference shows. Traceability is the second layer: who made the lot, which neutralisation and drying steps it went through, and which mill produced the mesh. The catalog specification is on the magnesium gluconate product page. The tests that separate this salt from its neighbours are on the identity page; the titration is described in the EDTA method note; how a lot is released is set out on the quality page. ### 02 Magnesium gluconate grades: mesh, granulation and water URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-gluconate/grades/ Reviewed: 2026-11-19 Magnesium gluconate is a single salt, so a grade cannot change the chemistry: the catalog material is the anhydrous powder at 98.0–102.0% with 5.5–6.0% elemental magnesium, and it is offered as a 40 mesh powder or granulated on request. The grade decision is about the powder instead — mesh, flow, bulk density and water. Because the salt carries only 5.86% magnesium, every one of those decisions lands on the fill weight. In one lineThe salt is fixed; what a grade buys is particle size, flow and water, and those decide the fill, the dust and the tablet. ## One salt, several powders The magnesium figure is set by the formula, not by the grade. A granulated lot and the standard powder from the same batch hold the same percentage of magnesium, so no grade choice can raise the potency of the powder. What a grade changes is how the powder behaves on the line and how much of it fits into a capsule, a tablet die or a sachet. Water is the one grade-like variable that does move the analysis. The material specified here is the anhydrous salt at water ≤1.0%, and a lot that picks up moisture behaves like a weaker material for the same drum weight: the assay on the as-received basis falls, the powder cakes, and the fill weight loses accuracy. A purchase order that says “magnesium gluconate powder” has named the chemistry and left the powder open. ## The catalog powder and the granulated option Grade attributes · standard powder against the granulated option | Attribute | Powder, 40 mesh (catalog) | Granulated, on request | Particle size | ≥95% through 40 mesh | Coarser, defined by the granulation | Bulk density | Lot-specific; ask for the measured figure | Usually higher; ask for both figures | Flow | Adequate for capsules; can bridge in a hopper | More uniform flow on a tablet press | Dust | Dusty at transfer | Lower dust at transfer | Tablet compression | Needs a binder and a density check | The usual starting point for tablets | Stick or sachet fill | Fills accurately; disperses quickly | Slower to dissolve; check the mesh | Caking risk | Higher in an open liner | Lower, but not removed | Specification status | The catalog item | A separate specification, with any aid declared The catalog fixes the mesh and says nothing about bulk density, so the density figure belongs in the quotation for the lot. Granulation is a separate specification rather than a packing choice: it changes the particle-size line and it may add a granulation aid, which has to be declared and may itself need a regulatory check. ## What the powder does before it is weighed Magnesium gluconate is freely soluble in water and gives a neutral solution, so solubility is not the grade question at this particle size. The powder is hygroscopic enough to cake under load in a humid store, and the 25 kg fiber drum has more headspace and a longer opening history than the 1 kg pouch. Keep the liner sealed, stand the drum off a concrete floor, and write down the opening date. Bulk density decides whether the fill weight is achievable, and it varies with the crystallisation and the mill. Two lots that both pass 40 mesh can differ enough in density to change a capsule fill by a tenth. For tablets, density and flow together decide whether the press runs at speed or stops for punches; a granulated grade is the usual answer, and it should be trialled on the press rather than approved on paper. Dust is a handling and hygiene issue as much as a yield issue. A finer powder suspends more readily at the weigh station, so local extraction and a closed transfer matter. Colour is white to off-white and is a weak signal on its own; a grey or yellow cast calls for the batch record rather than a grade decision. ## The fill follows the magnesium figure A 500 mg capsule fill of this salt carries about 29 mg of elemental magnesium. That single number explains why gluconate products are usually built around a moderate claim and why the grade and the fill have to be designed together. Powder mass needed for an elemental magnesium claim, at 5.86% magnesium | Elemental magnesium | Salt mass | Capsules at 500 mg fill | Practical format | 25 mg | About 425 mg | 1 | One capsule | 50 mg | About 855 mg | 2 | Two capsules or a small sachet | 75 mg | About 1,280 mg | 3 | Three capsules or a sachet | 100 mg | About 1,705 mg | 4 | Sachet, stick or a large tablet The masses are calculated from the formula, so read them as planning figures. A lot at the bottom of the magnesium range, 5.5%, needs about 6.5% more powder for the same claim: 1,818 mg rather than 1,705 mg for 100 mg. The lot certificate, not the table above, is what the capsule machine or the press is set against. A 100 mg claim is roughly 1.7 g of salt, which is four 500 mg capsules or a single sachet. A tablet of 1,000 mg is large by most consumers' standards and would deliver only about 59 mg of magnesium, so a high claim is not a realistic tablet for this salt. That is a property of the material, not a limitation of a particular grade. ## What to write into the specification - “Magnesium gluconate, anhydrous, CAS 3632-91-5, C12H22MgO14.” - “Assay 98.0–102.0% by complexometric titration, with the basis stated.” - “Elemental magnesium 5.5–6.0% on the same lot; water ≤1.0% by Karl Fischer.” - “Identification by infrared spectrum and titration, against a named reference.” - “Particle size ≥95% through 40 mesh; bulk density reported for the lot, with the method.” - “Granulated or unmilled grade declared, with any processing aid named.” - “Heavy metals and microbiology as listed on the catalog specification.” ## When a grade change is the wrong answer Granulation fixes flow and dust; it does not fix a claim that is too high for the capsule. If the fill is the problem, the answer is the dosage form, the capsule size or a different magnesium source, not a coarser powder. A denser salt such as anhydrous magnesium citrate at about 16.2% magnesium or magnesium oxide at about 60% would cut the mass sharply, but each is a different label ingredient and a separate regulatory question. If the problem is water rather than flow, a grade change does not help either. The pack and the store are the fix, and the stability page sets out how the powder behaves once the seal is broken. The catalog specification sits on the product page. The magnesium figure against the lactate is compared on the gluconate versus lactate page; the release tests are on the COA page; bulk density is defined in the bulk-density entry; the storage question is on the stability page. ### 02.1 Magnesium gluconate vs magnesium lactate: the magnesium figure and the fill URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-gluconate/grades/magnesium-gluconate-vs-lactate/ Reviewed: 2026-11-19 Magnesium gluconate carries 5.86% elemental magnesium and magnesium lactate trihydrate carries 9.48%, so the same 100 mg claim needs about 1,705 mg of the gluconate against about 1,055 mg of the lactate. Both salts are freely soluble in water and both give a near-neutral solution, so this comparison is not about solubility. It is about the mass that has to go into the capsule, the tablet or the sachet. In one lineAbout 5.9% magnesium in the gluconate against about 9.5% in the lactate means the same label claim needs roughly 650 mg more powder per 100 mg of magnesium. ## The two formulas and the two magnesium figures Magnesium gluconate is the salt of a monobasic acid, so it carries two gluconate ions per magnesium ion: C12H22MgO14, about 414.60 g/mol, of which magnesium is 24.305 g/mol. Magnesium lactate is also a 1:2 salt, but the lactate ion is smaller and the commercial crystal carries three water molecules: C6H10MgO6·3H2O, about 256.49 g/mol. The two salts on a common basis | Property | Magnesium gluconate | Magnesium lactate trihydrate | Formula | C12H22MgO14 | C6H10MgO6·3H2O | CAS number | 3632-91-5 | 18917-93-6 | Molar mass | 414.60 g/mol | 256.49 g/mol | Elemental magnesium | 5.86% | 9.48% | Catalog magnesium range | 5.5–6.0% | 8.5–9.5% | Water in the crystal | None; ≤1.0% as moisture | 21.07%, as a trihydrate | Magnesium per gram of salt | About 59 mg | About 95 mg Those percentages are calculated from the formulas, which makes the table planning arithmetic rather than a lot result. A gluconate lot at the bottom of its range, 5.5%, needs about 1,818 mg for 100 mg of magnesium; a lactate lot at 8.5% needs about 1,176 mg. Fix the fill weight against the certificate for the lot, not against this table. ## The arithmetic of a label claim Divide the elemental claim by the magnesium fraction of the salt and the mass of powder follows. The gluconate fraction is 0.0586 and the lactate fraction is 0.0948, so the gluconate needs 1.62 times the mass of the lactate for any claim. Powder mass for an elemental magnesium claim, by salt | Elemental magnesium | Magnesium gluconate | Magnesium lactate trihydrate | Extra mass with the gluconate | 25 mg | About 425 mg | About 265 mg | About 160 mg | 50 mg | About 855 mg | About 525 mg | About 330 mg | 100 mg | About 1,705 mg | About 1,055 mg | About 650 mg | 150 mg | About 2,560 mg | About 1,580 mg | About 980 mg | 200 mg | About 3,415 mg | About 2,110 mg | About 1,305 mg The gap grows with the claim: it is a fixed percentage, not a fixed weight, and a denser powder does not change it. ## Solubility: less of a difference than it looks Both salts are freely soluble in water and both give a solution close to neutral, so solubility rarely decides between them. The difference is the load: the same 100 mg claim puts about 1.7 g of the gluconate into a drink against about 1.05 g of the lactate, which in a 200 mL serving is 0.85% against 0.53% by weight. That extra solid has to dissolve, and it is tasted: a stick pack built on the gluconate carries two-thirds more salt than the same claim on the lactate, and the saltiness follows the mass rather than the magnesium. Measure dissolution in the actual volume and at the actual temperature before fixing the flavour. For a capsule or tablet, solubility is irrelevant: the powder is swallowed, so the magnesium figure and the fill decide. It matters only for sticks, drinks and liquids, where the gluconate's lower figure costs mass rather than clarity. ## What the figure does to the fill A 500 mg capsule fill delivers about 29 mg of magnesium from the gluconate and about 47 mg from the lactate. On that fill, a 100 mg claim is about three and a half gluconate capsules against about two lactate capsules; at 150 mg the gluconate is past five capsules and the lactate is past three. The formats follow from the count. A 2 g sachet delivers about 117 mg from the gluconate and about 190 mg from the lactate, so a high claim fits a sachet on either salt, but the gluconate needs a larger sachet for the same claim. A tablet has a harder ceiling: 1,000 mg is large by most consumers' standards and yields only about 59 mg of magnesium, so a 100 mg tablet claim is not practical on this salt. Bulk density moves the capsule count at the margin but cannot change the magnesium fraction. Granulation gives a denser powder that may fit the same mass into a smaller volume; the mass per milligram of magnesium stays where the formula put it. Ask for the lot's bulk density, and trial the fill on the powder that will actually be bought. ## What has to change on the label The ingredient list names the salt and the nutrition panel declares the elemental magnesium; those are two different numbers. A product declaring 100 mg of magnesium from magnesium gluconate contains about 1,705 mg of the salt, and a panel that declares the salt weight as magnesium misstates the nutrient by a factor of about seventeen. On the lactate the factor is about ten and a half. In the European Union the nutrition declaration gives the mineral in milligrams and relates it to the 375 mg adult reference intake, while the ingredient list names magnesium gluconate or magnesium lactate. On a US label the element goes in the Supplement Facts panel against the 420 mg Daily Value, and the salt goes in the ingredient list. Either way, swapping the salt is a label change even where the elemental claim does not move, because both the declared ingredient and the declared mass shift. A blend of the two is sometimes the sensible answer: the lactate lifts the magnesium per gram while the gluconate alters taste and dissolution. Each salt is named in the ingredient list and the elemental figure is the sum of the contributions; validate the blend's uniformity rather than assuming it from the two certificates. ## Which salt for which job - Take the lactate when the capsule count, the sachet size or the tablet weight is fixed and the claim is high. - Choose the gluconate when the label names it, when the claim per unit is moderate, or when an existing formula is built around it. - Choose neither from the drum weight; compare the powder needed per milligram of magnesium and the units per dose. - Run a salt switch as a change control: new fill calculation, new label and a check of the destination file. The magnesium gluconate page carries the catalog specification; the magnesium lactate page sets out the trihydrate; the magnesium citrate page shows a denser salt for a high claim; the methods library explains how the magnesium figure is measured; the quality page describes the release file behind each lot. ### 03 Magnesium gluconate stability: the dry salt, the pack and the solution URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-gluconate/stability/ Reviewed: 2026-11-19 Kept dry and sealed, the solid salt keeps well: the catalog caps water at 1.0%, and the anhydrous powder will move past that figure once a pouch is open in a humid room. In solution the same material becomes the harder case, because dissolved gluconate is a microbial substrate and the water that carries it also enables pH drift. A retest period is assigned from data on the pack that will be shipped, not from the certificate. In one lineThe dry salt is the stable format and the sealed pack is what keeps it dry; a solution adds water activity and microbiology to the list of things that can fail. ## The powder, and what water does to it The 1.0% water limit is a release gate, not an allowance for storage. Magnesium gluconate is hygroscopic: an opened pouch in a warm, damp room will take up moisture over days, the assay calculated on the as-received weight falls as the water rises, and the powder begins to cake against the liner. The seal and the store are therefore part of the specification in practice, whether or not the certificate mentions them. Warmth speeds all of this up. A sealed pack is usually comfortable at warehouse temperature; a loading bay, a van roof or a glasshouse is not a warehouse. Bring a cold pack up to room temperature before cutting the seal, otherwise moisture condenses directly onto the powder. Appearance is a slow indicator, and a coarse one. White to off-white covers a wide band, and movement inside that band is not a stability failure. A grey or yellow cast, or a cake that will not break under light pressure, is a reason to test the lot before using it. ## In solution, the water is the problem The salt dissolves readily and the solution is close to neutral, which is exactly why it is used in sticks, drink mixes and liquids. The same properties make an aqueous formula a friendly medium for microorganisms: the gluconate is a carbon source and water activity sits near 1.0. Any liquid therefore needs its own preservative system, a hold time it can prove and a microbiological limit. pH is the second control point. A neutral solution is the starting position, but an acidic formula pushes the equilibrium toward gluconic acid and moves both the taste and the assay over a hold. Trace metals are the third: iron and copper at very low levels can drive colour changes, so the contact materials and the trace panel deserve a look before a batch is committed. Heat is the fourth. Pasteurising or hot-filling a drink adds a load that the dry powder never experiences. A stick pack sidesteps that step entirely, since the consumer makes the drink at the point of use, and that is a large part of why the powder is the simpler format to validate. ## The variables that move during storage Storage factors for magnesium gluconate | Factor | Effect | Control | Moisture | Water rises, as-received assay falls, powder cakes | Sealed pouch; dry store; liner kept closed | Heat | Faster moisture pickup; browning in a wet matrix | Controlled store; cool process | Water activity | Microbial growth and pH drift in a liquid | Preservation and a validated hold time | pH | Shifts the gluconate and gluconic acid balance | Buffer the matrix; check the target pH | Iron and copper | Trace-metal colour change | Specify contact materials; check the panel | Seal integrity | A pinhole admits humid air | Inspect seals and liners on receipt None of these acts alone. A warm, damp store is worse than two separate effects added together, and a neutral drink in a clear bottle combines water activity, trace metals and a long hold in one package. The question worth asking is not whether the salt is stable, but in which pack, at which condition and for how long. ## Designing a stability study A study can only be interpreted when it states the pack, the storage condition, the sampling points and the assays. The warehouse arm is 25 °C at 60% relative humidity; the intermediate arm is 30 °C at 65%. The accelerated arm, 40 °C at 75% relative humidity, is there to stress the pack rather than to predict a label date on its own. A liquid needs an extra arm at the process pH and the process heat load. At each point, measure assay and magnesium, water, appearance, identity by infrared and the microbiological count; add pH and preservative efficacy for a drink. Individual results are far more useful than a pass statement, and the report should identify the pack and the lot family tested. A 1 kg pouch and a 25 kg drum have different headspace and different opening histories, so one does not stand in for the other. ## What the matrix adds A capsule or a tablet is a low-water system, but the shell and the excipients can still pass moisture to a hygroscopic fill, so water and appearance need checking after storage as well as at release. In a humid market, a two-piece capsule can soften around the fill — a pack and desiccant question before it is a chemistry question. For a stick pack the seal is the whole barrier. A pinhole counts as a failure even when the powder behind it still meets specification, so the strip itself belongs in the inspection. A drink is a different problem again: water activity, pH, heat and trace metals together, with the bulk stability of the ingredient as no more than a starting point. An overage is a decision for the formulator and the label, and it cannot rescue a pack that admits moisture. ## Assigning a retest period This salt has no single shelf-life figure attached to it, because the figure belongs to a pack and a storage condition. The retest period in force is written on the specification and backed by the study for that pack. Quoted alone, without the pack, the condition and the test panel, a number is an assertion rather than a shelf life. When the period expires, run the retained sample again before extending use; never extend out of habit, and never transfer a bulk figure to a repacked container. Standard packs are listed on the product page; release testing is on the COA page; pack sizes and dispatch are on the MOQ page; the water measurement is explained in the loss-on-drying entry; and the quality page sets out how a lot is released. ### 04 Magnesium gluconate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-gluconate/moq/ Reviewed: 2026-11-19 Magnesium gluconate is quoted from 1 kg, packed in a foil pouch; the bulk unit is a 25 kg fiber drum, and granulated material is a separate quotation. Dispatch runs 1–7 days from confirmation for the standard pack. A quotation can only be priced and documented properly from six details: the salt and its CAS number, the specification with its assay basis, the pack and quantity, where it is going and on what trade term, the documents, and the end market. In one lineThe minimum is one kilogram because a lot has to be sampleable and traceable, and a smaller split stops being either. ## Why the floor is a kilogram A kilogram is enough material to run a bench trial, keep a retained sample and send a portion to an outside laboratory. It is also a parcel rather than a pallet, which matters when a formulator is still waiting for the production plan to be signed. Most importantly it is a lot: one code, one certificate, one traceable pack. Anything smaller is normally scooped out of a larger lot and repacked. The chemistry does not change, but the pack identity does, and with it the ability to point at a certificate for the material in the bag. At the other end, a 25 kg drum cuts handling per kilogram while committing more inventory and more storage time — a real consideration for a hygroscopic powder. The floor is set by the pack, not by a sales threshold. ## Packs and formats Magnesium gluconate · standard packs | Unit | Contents | Where it fits | Handling | Foil pouch | 1 kg | Trials, qualification, small runs | Moisture barrier; reseal once opened | Fiber drum | 25 kg | Production | Inner liner; the lot code appears on drum and liner | Granulated grade | Quoted on request | Tablet compression, lower dust | Its own specification; any aid is declared | Repack below 1 kg | By arrangement | Bench work only | A split with its own traceability, not the catalog pack The catalog powder passes 40 mesh at ≥95%. Granulation is a specification change and not a packing preference, so it belongs in the enquiry; if the press or the sachet line needs a coarser, freer powder, say so before the price is fixed, because the mesh line and the lead time both move. ## Dispatch and transit The 1–7 day window covers picking, paperwork and handover to the carrier. Transit, import clearance and the customer's own goods-in release sit outside it. A granulated lot or a non-standard pack takes longer, and the quotation should show that as its own line rather than folding it into a general range. Ask when the lot will be dispatched; a lead time on its own does not say. A drum usually moves on a pallet and a pouch moves as a parcel, and the trade term decides who books the carriage and who clears the import. The documents belong with the goods, not in an email after arrival. ## What a usable quotation contains Six items make an offer comparable with another: - Material. Magnesium gluconate, CAS 3632-91-5, with the anhydrous form spelled out. - Specification. Assay and its basis, elemental magnesium, water, mesh, contaminants and microbiology. - Pack and quantity. The 1 kg pouch, the 25 kg drum, or the granulated grade. - Destination and trade term. Country, port or address, and the Incoterm. - Documents. COA, specification, SDS and any statement the importer needs for the market. - End use and market. Supplement, food, another use — and the market for the finished product. An offer that omits the market or the assay basis cannot be compared with another, because the same powder may be inside the file for one destination and outside it for another. Commercial terms are stated on the quotation and are not published here. ## A sample should be a lot Use the 1 kg pouch as the qualification pack. Check identity, assay, magnesium, water and microbiology, then keep part of it as the retained sample. The lot code on the pouch, the certificate and the quotation should all carry the same code; if they do not, the sample is a demonstration rather than a qualification. For a smaller bench quantity, agree the split before ordering. A repack from a bulk lot has its own traceability and should be documented as a repack, and there is no reason to assume that a bench sample and a later drum share a lot number. ## What to settle before the first order Commercial terms are only half of the agreement. Beside the commercial terms — Incoterm, pack, dispatch date — belong the quality terms: which specification revision applies, one certificate for each lot, the sample that is kept, the retest period, and how a change of source or process is handled. A quality agreement is cheaper before the first production order than after the first disagreement. Decide in advance how a failing lot is handled. The route is the retained sample and a joint re-test against the agreed specification, not a photograph of the powder; agree which laboratory both sides accept and who carries the cost of the referee work. Returns and replacements then follow the quotation and the quality agreement rather than a conversation. The catalog specification is on the product page; release tests are listed on the COA page; the grade page covers the powder choices; the compliance page handles the market files; the MOQ entry defines the term itself. ### 05 The regulatory file for magnesium gluconate URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-gluconate/compliance/ Reviewed: 2026-11-19 Magnesium gluconate is a magnesium salt of gluconic acid, sold here as the anhydrous powder under CAS 3632-91-5. A catalog specification says what the drum contains; the regulatory file is what shows that the material, the dose and the label are acceptable where the finished product will be sold. The buyer's own regulatory team confirms that route, because it turns on the destination, the dosage form and the intended use. In one lineThe material is simple; the file is not: identity, contaminants, label wording and the destination route are four separate documents. ## Four checks that make one file Work through them in order. First, which material is being bought, and against which specification revision? Second, which list governs its use in the destination market? Third, do the contaminant results survive the finished-product calculation at the real dose? Fourth, does the label identify the salt and state the mineral the way that market requires? A batch certificate answers the first question for a lot, a technical data sheet for the grade, and a safety data sheet covers handling; none of them settles the route. The salt also has two identities, and they matter for the route. As a food additive it carries E580; as a magnesium source for food supplements it is named on a separate list. The conditions attached to the additive use and to the supplement use are not interchangeable, so the file should state which route the finished product takes rather than citing both. ## European Union Annex II of Directive 2002/46/EC lists the substances a food supplement may use as vitamins and minerals, and magnesium gluconate appears among the magnesium sources there. Being named starts the work rather than ending it: the finished product still needs its Member State notification, its contaminant evidence and a label written to the general labelling rules. Cite the consolidated text in force at the time of the review, since the annex is amended. Labelling runs through Regulation (EU) No 1169/2011. The ingredient list carries the salt name, and the nutrition declaration states the magnesium in milligrams and relates it to the 375 mg intake reference for adults. The two figures have to agree with the lot: a product declaring 1,000 mg of magnesium gluconate is declaring about 59 mg of magnesium, and a panel that puts the salt weight in the mineral line overstates the nutrient many times over. Contaminants sit under Regulation (EU) 2023/915, whose supplement limits are written per kilogram of product as sold. A raw-material specification is a different kind of number, and converting between them is where most of the genuine work happens. The EU regulatory summary collects the instruments in one place. ## United States The US route counts the salt as a dietary ingredient, and the seller must be able to point to the basis on which it is lawful for the intended use. That basis has to be a document in the supplier file, not an inference from magnesium being an essential nutrient. There is no premarket approval step, but the label, the claim and the manufacturing records are all in scope, and 21 CFR 111 governs how the supplement is made. In the Supplement Facts panel the element is declared against the 420 mg Daily Value set for adults and children from age four, while the ingredient list separately names magnesium gluconate. Where a formula uses two magnesium sources, both belong in the ingredient list, and a panel that declares only the element leaves the consumer unable to tell what was used. State law runs alongside the federal position. California Proposition 65 is driven by the daily exposure rather than by the concentration in the drum, so a lot that satisfies an EU limit can still call for a warning once the daily intake is high. The Proposition 65 entry sets out the exposure arithmetic. ## Contaminants and the space the salt leaves The contaminant panel is a finished-product calculation. Because the salt carries only 5.86% magnesium, a high magnesium claim means a large mass of salt, and a large mass leaves little room for the rest of the formula to absorb a raw-material contribution. Contaminants · supplement limits and the catalog raw-material line | Element | EU supplement limit | Catalog raw material | Note | Lead | 3.0 mg/kg as sold | ≤3 mg/kg | Little headroom in a salt-heavy serving | Cadmium | 1.0 mg/kg as sold | ≤1 mg/kg | Confirm the category that applies | Mercury | 0.10 mg/kg as sold | ≤0.1 mg/kg | The same figure on both sides | Arsenic | No EU-wide figure | ≤2 mg/kg | National rules and customer limits vary Do the sum early. In a 2.0 g serving made up of 1.7 g of the salt, a finished-product lead limit of 3.0 mg/kg implies a raw-material ceiling near 3.5 mg/kg, because the salt is 85% of the serving. The catalog line of 3 mg/kg fits, but without much margin; a lower raw-material result, or a serving in which the salt is a smaller share, is what buys the margin back. A capsule where the salt is a fifth of the fill has far more room than a sachet that is almost all salt. ## Claims and label wording European nutrition and health claims are governed by Regulation (EC) No 1924/2006, and the magnesium wordings that may be used are on the authorised list in Regulation (EU) No 432/2012, each with its own conditions. They describe a contribution to normal function; they do not describe a disease, a symptom or an outcome. In the United States, a structure/function statement is the brand's own wording, and it has to be truthful, substantiated, and carry the DSHEA disclaimer. No disease-related claim is available in either market. These pages make no health claim for magnesium gluconate: the specification, the methods and the framework are what they publish, and any claim belongs to the brand that writes it and to the market that permits it. A statement about the material, such as “the gluconate is used in capsules and sachets”, is a description rather than a claim, and a technical page can carry it. ## The document pack - Batch certificate for the lot: assay, magnesium, identity, water, contaminants. - Specification and technical data sheet with the salt and the grade named. - Safety data sheet, 16 sections. - Allergen, GMO, origin and residual-solvent statements. - US dietary-ingredient basis, where the buyer needs one. - Third-party report, where the destination or the customer asks. ## Before the first order - Is the salt named on the destination's list for the route the product actually takes? - Recalculated to the real dose, do the contaminant results still sit inside the finished-product limit? - Does the nutrition panel match the salt and the assay basis on the certificate? - Is the claim authorised wording, or a structure/function statement with the disclaimer? - Do the specification, the COA and the quotation carry the same revision? Start with the catalog specification on the product page; then read the COA page for the lot certificate, the identity page for the analytical evidence, the Annex II entry for the list, and the quality page for the release file. ### 06 How we prove a magnesium gluconate lot is the gluconate URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-gluconate/identity/ Reviewed: 2026-11-19 The elemental magnesium figure is shared property: magnesium oxide, magnesium citrate, magnesium lactate and magnesium sulfate all return it. A gluconate lot is established when several independent lines agree — the titration, the infrared spectrum, the water and, if needed, the diffraction pattern — and when the mole ratio behind those numbers matches the formula. That ratio is one magnesium to two gluconate ions, and the magnesium fraction it predicts is 5.86%. In one lineA magnesium figure is the same measurement for every magnesium salt; the gluconate has to be proved by the anion, the water and the crystal. ## Four questions, four kinds of evidence Each layer answers something different, and each can fail on its own. Identity evidence for magnesium gluconate | Layer | Question it settles | Evidence | What it establishes | Paperwork | Is a salt named at all? | Name, CAS number, formula | A claim on a document | Metal | How much magnesium? | EDTA titration | Amount, not which anion | Anion | Is gluconate present? | Infrared spectrum against a reference | The gluconate part of the salt | Water and solid form | Anhydrous? Any second phase? | Karl Fischer; X-ray diffraction | Mass balance and crystal form The titration is the strongest measure of quantity and the weakest test of identity; infrared is the mirror image, qualitative but difficult to satisfy with a different magnesium salt. Neither is sufficient alone. ## The 1:2 ratio and the arithmetic it fixes Gluconic acid has one acidic proton and magnesium has two charges, so two gluconate ions are needed per magnesium ion: Mg(C6H11O7)2, which is C12H22MgO14 at about 414.60 g/mol. Divide 24.305 by 414.60 and the magnesium fraction is 5.86%; the two gluconate ions account for the other 94.14%. That single fraction ties the certificate together. If the assay is 98.0–102.0% of the salt, the magnesium must land between 5.74% and 5.98%. Pairing a 99% assay with a 5.5% magnesium figure breaks the arithmetic, and pairing a 97% assay with a 6.0% figure breaks it in the other direction. It takes a calculator and a minute. The same arithmetic limits what can be hidden in the powder. Magnesium oxide is about 60.3% magnesium and magnesium sulfate heptahydrate about 9.9%, so a meaningful addition of either pushes the magnesium and the assay through their ceilings at the same time. About 2.6 g of oxide per kilogram of salt lifts the magnesium from the formula value to 6.0%, and the assay has already passed 102% before that point. A low-magnesium diluent such as glucose or maltodextrin is a different case: it pulls both figures down together, so the assay is what notices, not the ratio. That is why the ratio is a first screen rather than a complete identity. It exposes a second magnesium salt and a plain dilution; it does not expose a non-magnesium diluent that has been balanced with a trace of oxide. The anion evidence closes that gap. ## What diffraction contributes X-ray diffraction identifies the crystalline phases in the powder. It separates the anhydrous gluconate from a crystalline second salt and shows whether the lot is crystalline at all. It does not measure purity and it says nothing about the counter-ion; it answers a question about the solid. A statement that no crystalline magnesium oxide was found describes the method as much as the sample unless the detection limit and the preparation are given. Amorphous carriers scatter poorly and can be present without a clear pattern, so a tidy diffractogram is not proof that no maltodextrin is in the drum. Read it with the infrared spectrum and the water figure. Diffraction is not a release test for this product. It earns its place for a new source, a disputed lot, or a blend that behaves unexpectedly on the press. ## Substitutions and the trace each leaves Substitutions, effects and the test that finds them | Substitution | Effect on the figures | Visible signal | Test | Glucose or maltodextrin | Assay and magnesium fall together | Low assay; water may climb | Assay, infrared, mass balance | Magnesium oxide | Both figures rise | Assay above 102%; oxide bands | Assay, infrared, diffraction | Magnesium sulfate or chloride | Magnesium rises; anion changes | Assay ceiling; sulfate band; water | Infrared, diffraction, water | Gluconic acid | Anion rises; magnesium falls | Acidic solution; low magnesium | pH, titration, infrared | Added water | As-received assay falls | Water above 1.0% | Karl Fischer This salt is not an obvious target for substitution, since the material itself is not costly. The failures that do occur are a cheaper magnesium salt carried over into a blend, a sugar carrier used to reach a declared weight, and a wet lot offered against a dry specification. All three surface in the panel above. ## Writing identity into the specification - “Magnesium gluconate, anhydrous, CAS 3632-91-5, C12H22MgO14.” - “Assay 98.0–102.0% by complexometric titration, with the basis stated.” - “Elemental magnesium 5.5–6.0% on the same lot, consistent with the assay.” - “Identification by infrared spectrum against a named reference, plus titration.” - “Water ≤1.0% by Karl Fischer; particle size ≥95% through 40 mesh.” - “No added magnesium oxide, magnesium sulfate, gluconic acid or carrier.” Prohibitions bind exactly as ranges do. If the purchase document fixes a magnesium range and stays silent on added minerals, nothing has been excluded, and a supplier cannot be held to a rule the document never contained. ## Five questions a buyer should ask - Which reference spectrum did the infrared identity conform to, and can we see it? - What are the assay and the elemental magnesium on this lot, and on which basis? - What is the Karl Fischer water figure, and on what date was it measured? - Is there a diffraction report, and which detection limit does it give? - Was any magnesium salt, gluconic acid or carrier added after the reaction step? Answers to those five amount to an identity file; a single assay percentage does not. The catalog specification is on the product page; the COA page shows where each figure sits; the grade page covers the powder choices; the FTIR method note and the XRD method note explain what each technique can see. ### 01 What the COA for magnesium orotate actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-orotate/coa/ Reviewed: 2026-11-19 Magnesium orotate dihydrate is released against three numbers that have to agree: an HPLC assay of 98.0–102.0%, elemental magnesium of 6.4–6.8% by complexometric titration, and water of crystallisation of 9.0–11.0% by Karl Fischer. The certificate also carries IR and HPLC identification, the heavy-metal panel, microbiology and particle size. The magnesium figure is the one a formulator uses; the assay and the water explain why it is that figure and not a higher one. In one lineThe magnesium figure, the HPLC assay and the water of crystallisation describe one hydrate; the certificate is complete only when all three are reported on the same lot. ## Reading the certificate line by line A certificate is a record of measurements, not a verdict. Each row needs the parameter, the method behind the number, the limit the lot had to meet, and the result that was actually measured. The table is the catalog specification, not a result from a particular drum. Identity, assay, water and contaminants · magnesium orotate dihydrate | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | IR spectrum; HPLC retention | Matches the reference | Assay | HPLC | 98.0–102.0% | Magnesium | Complexometric titration | 6.4–6.8% | Water | Karl Fischer | 9.0–11.0% | Heavy metals | ICP-MS, four elements | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Aerobic plate count; absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve, 40 mesh | ≥95% through 40 mesh The identity row is where the powder is tied to the salt. Compare the infrared spectrum with a magnesium orotate dihydrate reference, not with orotic acid alone, and ask for a peak-purity check beside the HPLC retention. Orotic acid absorbs ultraviolet light around 280 nm, so a photodiode-array spectrum adds a useful check; retention alone is thin. ## Assay, magnesium and the water of crystallisation The HPLC number and the titration number are not measuring the same thing. HPLC measures the orotate molecule; complexometric titration measures the magnesium ion. Either one alone leaves the salt unproven, and each needs a stated basis. On the dihydrate, magnesium is 24.305 ÷ 370.52 = 6.56% of the formula mass. The catalog range of 6.4–6.8% brackets that figure, which is what a dihydrate should read as received. On a dried basis the figure is 7.27% at theory; applying the 9–11% water window to the as-is range gives roughly 7.2–7.5%. A 6.6% result with no basis leaves the reader guessing which powder is being described. Water is the third line and the one most often reported loosely. The dihydrate carries 9.7% water at theory, and the catalog window of 9.0–11.0% allows for surface moisture and for the drying step. A lot at the top of the window is still in specification, but its as-is magnesium sits near the bottom of the range, and more powder is needed for the same dose. Ask for Karl Fischer water rather than loss on drying when the hydrate is the specification: loss on drying counts other volatiles too. ## The limit and the measured result The limit is the pass line; the result is what the laboratory found. Both belong on the page, in separate columns, with the method beside them. A result column that repeats the range has copied the gate rather than reported a measurement. What the result column should contain | Parameter | Release limit | Result column | Assay | 98.0–102.0%, basis stated | A measured percentage, with the basis and the method | Magnesium | 6.4–6.8%, basis stated | A measured percentage and the titration method | Water | 9.0–11.0% by Karl Fischer | A measured percentage | Identification | IR and HPLC match the reference | The spectra and the retention, with peak purity | Heavy metals | One limit per element | A measured figure in mg/kg for each element | Microbiology | Counts plus absence | The lot count and absence statement | Particle size | 40 mesh, ≥95% pass | The measured percentage through the sieve The conclusion should be reachable from the figures, not asserted in their place. Heavy metals need one figure per element rather than a sum, and microbiology needs a count and an absence line. A certificate that reports a single heavy-metal total has hidden the element that matters. ## Batch-to-batch variation Crystallisation and drying move the water first. Within the 9.0–11.0% window the powder is the same hydrate family, but the as-is magnesium moves by about 2% relative, enough to shift a fill weight. The assay follows the water when it is reported as-is, and it stays close to the HPLC limit when it is reported on the dried basis. Milling moves the particle-size line without touching the chemistry. A lot at 96% and one at 99% through 40 mesh are both in specification, but they flow and blend differently. Appearance is the least quantitative line: white to off-white covers a wide window, and a shift inside it is not an identity failure. Free orotic acid is not on the catalog panel, but it is the related substance to ask about when the assay drifts or a second HPLC peak appears. The salt is the magnesium salt of a weak acid; an excess of free acid lowers the magnesium figure and changes the chromatogram. A related-substance method is worth requesting for a new source. ## When an outside laboratory helps Commission an outside test for a new source, a first shipment into a regulated market, a disputed hydrate or a disputed form. The useful panel is not a repeat: IR and HPLC identity with peak purity, magnesium by ICP-OES as an independent check on the titration, Karl Fischer water, ICP-MS heavy metals, microbiology, and a related-substance scan. Add XRD when an oxide blend or a crystalline form is suspected; the method note explains what a detection limit means. Ask the laboratory to report its limit for every screen. A “not detected” line without a limit describes the method's sensitivity, not the sample. Chain of custody matters. The sample tested should be the retained sample, and the report should identify the lot. For a disputed result, send the referee the retained sample, the certificate and the specification, and ask for hydrate-versus-blend tests rather than another run of the same assay. ## Comparing two quotations Six lines make two quotations comparable: the hydrate and its water limit; the assay with its basis; the magnesium result and its method; the identification evidence; the contaminant and microbiology results; the pack size and lot code. Two quotations that agree on 99% but differ on water are not describing the same powder. Traceability is the second layer: who made the lot, which drying and milling steps were used, and whether the certificate, pouch and drum carry the same code. Catalog data is on the magnesium orotate product page. The tests that separate the salt from a blend are on the identity page; the titration is described in the complexometric method note; the HPLC method is in the HPLC note; the release workflow is on the quality page. ### 02 Choosing a magnesium orotate grade: the salt, the hydrate and the fill URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-orotate/grades/ Reviewed: 2026-11-19 Magnesium orotate is one of several magnesium salts, and at 6.4–6.8% elemental magnesium it is one of the lowest-percentage common choices: a 100 mg magnesium dose needs about 1.5 g of the dihydrate. The grade question is a salt question first, among orotate, citrate, lactate and oxide, and a particle question second. The hydrate and the mesh belong in the specification, not in the packing notes. In one lineAt 6.4–6.8% magnesium, orotate needs about 1.5 g of powder per 100 mg of the element, so the grade choice is a fill-weight decision before it is a label decision. ## The label names two different masses The label names the salt in the ingredient list and declares magnesium in the nutrition panel. Those are two statements about two different masses. Magnesium orotate is the magnesium salt of orotic acid, a pyrimidine carboxylic acid, in a 1:2 ratio: two orotate anions for each magnesium ion. The dihydrate formula is C10H6MgN4O8·2H2O, and the molar mass is about 370.5 g/mol. Only 6.56% of that mass is magnesium; the rest is the orotate and the water of crystallisation. A purchase order that says “magnesium” has selected the nutrient but not the ingredient, and two salts that both answer to that word can differ by a factor of two or more in the powder needed for the same label claim. ## Orotate against the other magnesium salts Magnesium salts compared · element, mass and solubility | Salt | Elemental Mg | Powder per 100 mg Mg | Water solubility | Usual fit | Magnesium orotate, dihydrate | 6.4–6.8% | About 1,470–1,560 mg | Slightly soluble | Capsules, tablets | Magnesium citrate, anhydrous | 14.5–16.4% | About 610–690 mg | Soluble | Capsules, tablets, sticks | Magnesium citrate, nonahydrate | About 11.9% | About 840 mg | Soluble | Sticks, beverages | Magnesium oxide | 57.0–60.0% | About 167–175 mg | Practically insoluble | Tablets, capsules The table compares the element and the mass, not a health effect. The orotate's low percentage is not a defect; it is the arithmetic of a large organic counter-ion. The citrate and the lactate dissolve more readily, and the oxide is the most concentrated and the least soluble. The magnesium lactate page carries that specification, and the citrate page carries the other. ## Flow, mesh and the suspension The catalog grade is a 40 mesh powder: at least 95% passes a 425 µm sieve. Mesh is a flow and blending property, not a purity ranking. The catalog does not fix a bulk density, so ask for the lot figure: two powders at the same mesh can fill a capsule die differently. Solubility is the physical line that separates orotate from citrate and lactate. The dihydrate is only slightly soluble in water, so a dispersion is a suspension, not a solution. In a capsule or tablet, the sediment question does not arise; in a stick pack it is visible unless the grade is milled finely and the formula is built as a suspension. Granulation is available on request and changes the flow and the dust, not the salt. ## From dose to fill weight The calculation starts with the elemental target and divides by the magnesium fraction. At 6.6%, 100 mg of magnesium needs about 1,515 mg of dihydrate; at the edges of the range the figure runs from about 1,470 to 1,560 mg. A 500 mg capsule therefore carries only about 32–34 mg of magnesium, and a 1,000 mg tablet carries about 64–68 mg. That arithmetic decides the format. A 100 mg claim needs roughly 1.5 g of orotate, which is two to three size 00 capsules or a large tablet; the same claim from anhydrous citrate is about 0.62 g and from the nonahydrate about 0.84 g. In a stick pack the orotate mass fits, but the low solubility has to be designed around. The orotate versus citrate page works the comparison through dose by dose. ## Specification lines for the dihydrate Build the specification around the dihydrate and the two assays, not around a generic magnesium figure. - “Magnesium orotate dihydrate, CAS 34717-03-8, C10H6MgN4O8·2H2O.” - “Assay 98.0–102.0% by HPLC, with the basis stated.” - “Magnesium 6.4–6.8% by complexometric titration, with the basis stated.” - “Water 9.0–11.0% by Karl Fischer.” - “Identification by IR against a dihydrate reference and by HPLC retention with peak purity.” - “≥95% through 40 mesh; granulated or milled variants quoted separately.” - “No added magnesium oxide or another magnesium salt.” A specification copied from magnesium citrate will fail on the magnesium range and on the water, and the supplier will be right to reject it. The salt name, the hydrate and the assay basis are the three lines that make the rest of the document checkable. The magnesium orotate product page carries the catalog specification, and the compliance page covers the market questions that follow the salt choice. The complexometric method note describes the magnesium assay, and the HPLC note describes the orotate assay. ### 03 Magnesium orotate dihydrate: water, heat and the sealed pack URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-orotate/stability/ Reviewed: 2026-11-19 Magnesium orotate dihydrate is stable as a sealed solid; the specification is built around its water. The lattice carries 9.7% water at theory, the catalog allows 9.0–11.0%, and the magnesium per gram moves with that figure. The practical risks are moisture gain or loss in an opened pack, heat, and light exposure of the orotate ring; an aqueous solution is limited by solubility before it is limited by degradation. In one lineThe hydrate is the specification: hold the water at 9–11%, keep the powder sealed and dark, and the orotate and the magnesium stay in the ratio the certificate reports. ## The dry powder: water, heat and the hydrate state On a dried basis, pure magnesium orotate is 7.27% magnesium. The as-is figure is that number multiplied by the dry matter: at 9% water it is about 6.61%, at 11% about 6.47%, and the catalog range of 6.4–6.8% brackets the window. A certificate that reports 6.6% as-is is consistent with the dihydrate; one that reports 6.6% and 11% water together is asking for a basis check. Over-drying is not a neutral act. Driving the lattice water out creates a lower hydrate, or the anhydrous salt at 7.27% magnesium; either takes up water again when exposed. A dryer set to hit a loss-on-drying target can move the hydrate state while the assay still passes on a dried basis. That is why the water window is a specification line, not a processing note. The dihydrate is not a highly soluble salt, so it does not pull water as aggressively as a chloride, but it is not sealed against the air either. It can gain surface water in a humid store and lose it in a dry one. Both moves change the as-is magnesium and the flow: a damp powder cakes and a bone-dry one can dust. The foil pouch is the barrier; once it is opened, the seal is the weak point. ## The solution: solubility before stability The dihydrate is only slightly soluble in water, so an aqueous stock is dilute and a clear solution is not a concentrated one. Solubility also changes with pH: orotic acid is a weak acid, and protonation shifts the amount that can stay in solution. A stock that is clear at one pH can cloud when the pH moves or when it is cooled. The orotate ring absorbs ultraviolet light around 280 nm, so a clear bottle on a bench is an unnecessary exposure. In solution, light, oxygen and heat act together, and a heat step used to dissolve the salt adds to the load. Where a liquid cannot be avoided, screen it from light, set the pH, shorten the hold and prove stability in the matrix; the powder result does not carry across. ## What moves the powder in storage Factors that move magnesium orotate during storage | Factor | What it does | Control | Water and humidity | Gains or loses hydrate water; as-is magnesium moves | 9–11% Karl Fischer window; sealed pack | Heat | Accelerates water loss and degradation | Controlled store; cool process | Light | The orotate ring absorbs UV; colour and assay risk | Opaque or foil pack; dark store | pH, in solution | Protonation changes solubility; precipitation | Fix the matrix pH; validate the hold | Oxygen, in solution | Oxidation at the orotate ring | Low headspace; sealed pack; process control | Compaction and shear | Heat and crystal contact in a press or blender | Control the process; check the fill The factors compound: a warm, bright, humid store does more damage than three separate stresses, and a warm solution in clear glass combines all of them. The useful question is not whether magnesium orotate is stable, but in which pack, at which condition, for how long. ## Designing the stability study A usable protocol fixes the pack, the condition, the sampling points and the test panel. Long-term 25 °C/60% RH, intermediate 30 °C/65% RH and accelerated 40 °C/75% RH cover the warehouse and stress the pack; a light-exposure arm covers what a dark incubator cannot. Test assay, magnesium, Karl Fischer water, appearance, IR identity and microbiology at each point. The report should list each result rather than a pass mark, and name the pack and the lot family. Repeat the work in the matrix at the process pH and heat load for a stick pack or drink; bulk data does not transfer. ## The formula is a separate experiment Capsules and tablets keep water activity low, but excipients and shells still move moisture. Check water and appearance at release and after storage, and check the fill weight if the powder's flow changes. A direct-compression run adds heat and shear; neither is large, but both belong in the process description. A stick pack or a drink is another matter. The orotate is only slightly soluble, so the drink is a suspension unless the dose is low or the grade is milled. Sediment, ringing and mouthfeel are formulation issues before they are stability issues. A gummy adds heat and an acidic matrix; both move the salt. An overage is a label and stability choice; it does not fix a pack that admits moisture. ## How a retest period is assigned No single shelf-life number is published for magnesium orotate; the pack and the storage condition decide it. The retest period belongs on the specification and rests on data for that pack. A figure without a pack, a condition and a test panel is a claim, not a shelf life. The 1 kg foil pouch and the 25 kg fiber drum have different headspace and different opening histories. Keep the liner closed, record the opening date, and re-test the retained sample after the retest period rather than extending by assumption. Pack options are on the product hub; release tests on the COA page; pack and lead time on the MOQ page; the methods in the methods library; the release workflow on the quality page. ### 04 Magnesium orotate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-orotate/moq/ Reviewed: 2026-11-19 The MOQ for magnesium orotate is 1 kg, supplied as a 1 kg foil pouch; the bulk pack is a 25 kg fiber drum, and the standard lead time is 1–7 days. At 6.4–6.8% magnesium, a kilogram carries only 64–68 g of the element, so the minimum is a trial and qualification quantity rather than a production lot at a high dose. In one lineOne kilogram is the smallest traceable lot, and at 6.6% magnesium it carries only about 66 g of the element: enough for a trial, not a production run. ## Why the floor is one kilogram One kilogram is enough for a bench trial, a retained sample and an independent identity check, and it ships as a parcel. It is also a commercial unit with a lot code. Under 1 kg the material is normally split from a larger lot and repacked; handling rises and the original pack identity is lost, while the chemistry does not change. The magnesium content puts the pack size in perspective. A kilogram of the dihydrate carries 64–68 g of elemental magnesium, which is 640–680 doses at 100 mg before any overage. A kilogram of anhydrous citrate carries about 145–164 g, so the same pack covers more than twice the dose. The MOQ is a pack decision, not a volume incentive, and the dose arithmetic belongs in the planning before the drum is booked. ## Pack options Standard magnesium orotate packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Barrier film; close firmly after use | Fiber drum | 25 kg | Production | Liner inside; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Process variant; particle profile changes | Milled powder | On request | Finer dispersion | Particle size changes; solubility does not The foil pouch is the moisture barrier, and on a dihydrate the seal is part of the specification. Folding an opened pouch is not a heat seal, and the headspace then holds humid air. The drum relies on its liner. Lot codes on the pouch, the drum and the certificate should match. ## From order to dispatch The standard pack is quoted at 1–7 days after order confirmation. That covers picking, documents and dispatch; transit, customs and the customer's release sit outside it. A custom granulation, a milled grade or a non-standard pack adds time and should be quoted separately. Ask for the dispatch date rather than the lead time alone. The 1 kg pouch can travel as a parcel, the 25 kg drum can travel on a pallet, and the Incoterm decides who books freight and clears entry. The documents should travel with the lot. ## What makes a quote comparable Six items make a quotation firm enough to compare: - Product and hydrate. Magnesium orotate dihydrate, CAS 34717-03-8, with the hydrate written out. - Specification. Assay and its basis, magnesium, Karl Fischer water, mesh, heavy metals and microbiology. - Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated or milled grade. - Destination and Incoterm. Country, delivery point and trade term. - Documents. COA, specification and SDS, plus any destination statement the importer needs. - Intended use and market. The use (supplement, food or other) and the country of sale. A quotation that says “magnesium orotate” without the hydrate and the water limit is incomplete. The same name can cover the dihydrate and a lower hydrate, and the magnesium per gram differs between them. ## The sample carries a lot code The 1 kg pack is the qualification sample. Test identity, assay, magnesium, water and microbiology before scaling, and retain a sample from the same pack. Sample, certificate and quotation should share one lot code. A sample without a lot trail is a demonstration, not a qualification. A smaller bench quantity is a split and is documented as a repack. The bench sample and the production drum need not share a lot. ## Commercial and quality terms The quotation sets the commercial terms, the Incoterm, the pack and the lead time. The quality terms sit beside them: specification revision, COA per lot, retained sample, retest period and change control. Settle a quality agreement before the first production order rather than after the first dispute. Returns and replacements follow the quotation and that agreement. A failing lot goes to the retained sample and a joint re-test, not to a photograph. Ask who pays for the referee test and which laboratory both sides accept. Catalog data is on the product hub; the COA page sets out the release tests; market files are on the compliance page; the MOQ glossary entry defines the term; shipping documents are covered by the logistics page. ### 05 The regulatory file for magnesium orotate URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-orotate/compliance/ Reviewed: 2026-11-19 The regulatory file for magnesium orotate starts with the exact salt: the dihydrate, CAS 34717-03-8, at 98.0–102.0% assay and 6.4–6.8% magnesium. Permission, contaminant limits, label wording and claim rules are four separate tests, and an entry for another magnesium salt does not answer any of them. The buyer's regulatory team confirms the route for the destination; this page lists the checks and the documents that route needs. In one linePermission, contaminants, label and claim are four separate checks, and an entry for another magnesium salt does not transfer to the orotate. ## What the file has to settle A complete file answers four questions. Is the exact salt permitted as a magnesium source in the destination? Do the contaminant results fit the finished-product ceiling at the real dose? Does the label name the salt and declare the element correctly? Is the claim one the market allows? The certificate answers none of these on its own; it supplies the lot data the answers rest on. The specification version, the hydrate, the assay basis and the CAS number should be the same in the quotation, the technical data sheet and the certificate. A file that drifts between “magnesium orotate” and “magnesium orotate dihydrate” is already inconsistent before a regulator reads it. ## European Union Directive 2002/46/EC sets the framework for food supplements, and Annex II carries a positive list of permitted vitamin and mineral substances, magnesium sources among them. The list names individual salts. The first check is whether magnesium orotate, as the dihydrate, is named in the version in force at the time of placing on the market; the list is amended over time, and the current consolidated text governs. If the salt is not named on the supplement list, that does not create a route by itself. The novel-food regulation, the food-additive route and the general food law each have their own test, and the buyer's regulatory team confirms which one applies. General labelling under Regulation (EU) No 1169/2011, contaminant limits under Regulation (EU) 2023/915 and claims under Regulation (EC) No 1924/2006 apply alongside whichever route is used. The product-specific file should show the specification the lot was made to, the certificate for the lot and the label artwork. A notification or an entry on a list is not a substitute for any of the three. ## United States For the United States, the route runs through the dietary-ingredient provisions: the seller has to name the basis, whether pre-1994 marketing, a new dietary ingredient notification, or a GRAS conclusion for a food use. An essential nutrient does not make every salt a lawful ingredient; the specific basis is what counts, and it belongs in the supplier file rather than in an assumption. The Supplement Facts panel reports elemental magnesium against the 420 mg Daily Value, and the ingredient list names the salt. A blend with another magnesium source names both. Structure/function statements carry the DSHEA disclaimer and must be substantiated; disease claims are not available. ## Contaminant ceilings Contaminants are a finished-product calculation, not just a drum result. The table is a supplement starting point; the text in force and the daily dose settle the final figure. Contaminant limits to confirm for the finished product · as of this review | Element | Typical supplement reference | What the file should show | Lead (Pb) | 3.0 mg/kg in the supplement as sold | Measured lot figure, method and dose calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement as sold | Lot figure and any category exception | Mercury (Hg) | 0.10 mg/kg in the supplement as sold | Lot figure and method | Arsenic (As) | Customer or market limit | Agreed limit and method on the certificate The orotate's low magnesium fraction matters here. A 100 mg magnesium dose is about 1.5 g of the dihydrate, so the salt can be most of a capsule or a sachet. At 75% of the serving mass, a raw material at the 3.0 mg/kg lead limit contributes about 2.25 mg/kg to the finished product, which leaves very little room under a 3.0 mg/kg ceiling. A concentrated salt such as the oxide would sit at a much smaller share of the serving and could carry a higher raw-material figure. Run the sum before the first order. ## Wording and claims European magnesium claims sit in Regulation (EU) No 432/2012, and each carries conditions. They speak of a contribution to normal function, not of a disease, a symptom or an outcome. In the United States, a structure/function statement belongs to the brand, must be truthful and substantiated, and carries the DSHEA disclaimer. Nothing on this site is a claim for magnesium orotate. The pages publish the specification, the methods and the framework; the claim is the brand's to print and the market's to authorise. A sentence such as “the dihydrate is used in capsules and tablets” describes the material, not a health effect. ## Documents behind the file - Batch certificate covering assay, magnesium, Karl Fischer water, identity and the contaminant panel. - Specification and TDS naming the dihydrate and its CAS number. - Safety data sheet, 16 sections. - Statements on allergens, GMOs, origin and solvent residues. - The US dietary-ingredient basis, if the buyer needs it. - A third-party report, if the review or the customer asks for one. ## Five checks before ordering - Confirm that the exact salt, magnesium orotate dihydrate, is permitted as a magnesium source in the destination market. - Recalculate the contaminant results at the real dose against the finished-product limit. - Match the nutrition declaration to the salt, the hydrate and the certificate. - Check that the wording is an authorised claim or a substantiated structure/function statement. - Keep the US ingredient-status basis and the current Great Britain and Northern Ireland position in the pack. The product hub carries the specification these checks are run against; the identity page covers the analytical evidence; the grades page explains the salt choice that drives the label arithmetic; the EU regulatory summary gathers the instruments; the quality page describes the release file. ### 06 How we prove a magnesium orotate lot is the dihydrate URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-orotate/identity/ Reviewed: 2026-11-19 A magnesium orotate lot is the dihydrate when four lines agree: the document names the hydrate and CAS 34717-03-8; HPLC and IR show the orotate; complexometric titration gives 6.4–6.8% magnesium; and Karl Fischer gives 9.0–11.0% water. The magnesium figure alone is the weakest line, because a blend of magnesium oxide and orotic acid can be built to the same percentage. In one lineThe magnesium assay can be imitated; the orotate by HPLC and IR, the 1:2 ratio and the water of crystallisation are what make the lot the salt. ## Four questions, four tests A certificate may name the right salt and still leave it unproven. The four layers ask separate questions and stand on separate tests. Answering only the first describes the paperwork, not the powder. Four layers of magnesium orotate identity | Layer | Question | Test | What it proves | Document | Is the hydrate named? | Name, CAS number, formula | Paperwork only | Organic part | Is the anion orotate? | HPLC retention with UV spectrum; IR against a reference | The orotate molecule | Metal part | Is the magnesium bound in the salt? | Complexometric titration; ICP-OES as a check | The magnesium content, not its source | Mass balance | Is it the dihydrate, or diluted? | Karl Fischer water; assay and impurities | Consistency of the numbers No single layer is sufficient. HPLC can show orotic acid in a physical blend as readily as in the salt, and the titration can show magnesium from an oxide. The layers become evidence when they agree on the same lot. ## The 1:2 ratio and the mass balance The formula sets the targets. Magnesium orotate dihydrate is C10H6MgN4O8·2H2O at about 370.5 g/mol. Magnesium is 24.305 g/mol, or 6.56%; the two orotate anions account for about 84% of the mass as orotic acid equivalent; the two water molecules are 9.7%. A magnesium result inside 6.4–6.8% with water inside 9.0–11.0% is consistent with the dihydrate. The salt is a 1:2 salt. One magnesium ion balances two orotate anions, so the molar ratio is fixed even though the mass ratio is not obvious. Convert both results to moles and the Mg : orotate ratio should sit near 1:2; a calculated ratio outside the agreed window points to free orotic acid, another magnesium source or a different hydrate. Because the ratio is calculated from two assays, its uncertainty combines both; put a range in the specification, not a single number. Magnesium above 6.8% is a signal. The pure dihydrate cannot exceed 6.56% as-is, so a higher figure points to the anhydrous salt, a different hydrate, another magnesium source or an assay bias. A top-of-range figure is not a richer lot until water and identity explain it. ## X-ray diffraction and the solid-state check X-ray diffraction answers the solid-state question: is the powder crystalline, and does the pattern match a magnesium orotate dihydrate reference? It can separate a crystalline salt from an amorphous carrier or a blend, and it can compare lots from two sources. It is not a purity assay, and it does not measure the counter-ion. The practical use here is the oxide screen. Crystalline magnesium oxide shows up in a diffraction pattern; how low it can be seen depends on the method and the preparation, so a “none detected” line needs the limit beside it. XRD is not a routine release test for this product; request it when a blend is suspected or a new source is being qualified. The XRD note explains the limit. Infrared spectroscopy complements diffraction. Compare the spectrum with a dihydrate reference rather than orotic acid alone; the carboxylate and N–H regions separate a mixture from a reacted salt. The FTIR note describes the comparison. ## Routes of substitution Substitutions and the signals to test for | Route | What it does | Signal | Test | Magnesium oxide plus orotic acid | Matches the magnesium figure without forming the salt | IR mismatch; water below the hydrate window | IR, XRD, Karl Fischer | Another magnesium salt | Raises magnesium without adding orotate | Magnesium high for the orotate result | HPLC, IR, ICP-OES | Free orotic acid | Lowers magnesium; adds an HPLC peak | Magnesium low; orotic acid high | HPLC related substances | Carrier or dilution | Lowers assay and magnesium together | Both low; water and ash shift | Mass balance, assay | Water | Lowers as-is magnesium; dried basis normal | Karl Fischer high for the lot | Karl Fischer, assay basis Colour proves the least: white to off-white covers a wide range, and a carrier can match it. The stronger signals are the HPLC orotate result, the magnesium figure, the water and the IR spectrum. Appearance and assay without an identity line leave the likely substitution untested. ## Identity written into the specification - “Magnesium orotate dihydrate, CAS 34717-03-8, C10H6MgN4O8·2H2O.” - “Assay 98.0–102.0% by HPLC, with the basis stated.” - “Magnesium 6.4–6.8% by complexometric titration, with the basis stated.” - “Water 9.0–11.0% by Karl Fischer.” - “Identification by IR against a dihydrate reference and by HPLC retention with UV spectrum and peak purity.” - “No added magnesium oxide or another magnesium salt; related substances reported.” The name is the first identity test. A specification that says “magnesium orotate” without the hydrate has already left the water and the magnesium basis open, and the certificate will follow the ambiguity. ## Five questions to put in writing - Which hydrate is this lot, and what are the Karl Fischer water and the magnesium result for it? - Can you provide the HPLC chromatogram with the UV spectrum and the IR spectrum against a dihydrate reference? - Was the magnesium result by titration or by ICP-OES, and on which basis is it reported? - Was an XRD oxide screen run, and what limit of detection is reported? - Would you accept a joint re-test of the retained sample if the lot is disputed? Those five answers make an identity file; one assay percentage does not. Catalog data sits on the product hub; the COA page marks where each figure is reported; the grades page covers the salt choice; the HPLC note covers the separation; release control is described on the quality page. ### 02.1 Magnesium orotate vs citrate: solubility, magnesium and the dose URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-orotate/grades/magnesium-orotate-vs-citrate/ Reviewed: 2026-11-19 Magnesium orotate dihydrate carries 6.4–6.8% elemental magnesium; anhydrous magnesium citrate carries 14.5–16.4% and the nonahydrate about 11.9%. A 100 mg magnesium dose therefore needs about 1.5 g of orotate against about 0.62 g of anhydrous citrate or 0.84 g of the nonahydrate. The orotate is only slightly soluble in water, while the citrate dissolves readily, so the choice turns on the dosage form as much as on the dose. In one lineOrotate carries about 6.6% magnesium against 16.2% for anhydrous citrate, so the same dose needs about 2.4 times the powder, and the solubility gap decides which format can carry it. ## The fraction sets the mass Magnesium orotate is the magnesium salt of orotic acid in a 1:2 ratio. The dihydrate is C10H6MgN4O8·2H2O at about 370.5 g/mol, and magnesium is 6.56% of that mass. Magnesium citrate is the magnesium salt of citric acid at a 3:2 ratio. The anhydrous salt is Mg3(C6H5O7)2 at about 451.1 g/mol and 16.2% magnesium; the nonahydrate adds nine water molecules and falls to about 11.9%. Magnesium orotate and magnesium citrate · formula, mass and magnesium | Salt | Formula | Molar mass | Mg, theoretical | Mg, catalog | Water | Orotate, dihydrate | C10H6MgN4O8·2H2O | 370.5 g/mol | 6.56% | 6.4–6.8% | 9.7% at theory | Citrate, anhydrous | Mg3(C6H5O7)2 | 451.1 g/mol | 16.2% | 14.5–16.4% | None in the lattice | Citrate, nonahydrate | Mg3(C6H5O7)2·9H2O | 613.3 g/mol | 11.9% | About 11.9% | About 26% Each catalog range is a pass band, not a hydrate selection. The calculation below uses the midpoint for planning; the certificate is what the fill calculation uses. ## Solubility separates the formats The orotate is only slightly soluble in water. A clear solution is a dilute one, and a concentrated stock is a suspension or needs a solubilising strategy. The citrate is the soluble salt: the anhydrous and the nonahydrate both dissolve readily enough for a stick pack or a drink, which is why the citrate is the usual choice when the format is aqueous. Solubility is not the same as stability. A clear citrate solution still needs light, pH and hold-time work; the orotate's low solubility limits the concentration before degradation does. In a capsule or a tablet, the orotate's solubility hardly matters, because the powder is swallowed with water and dissolves at its own rate. pH moves the orotate. Orotic acid is a weak acid, so protonation changes how much stays in solution; a stock that is clear at one pH can cloud at another. The citrate has its own pH behaviour and its own taste, and a formula built for one salt cannot be swapped for the other without rechecking both. ## The mass per dose Divide the elemental dose by the magnesium fraction. At the midpoint of each catalog range, 100 mg of magnesium needs about 1,515 mg of orotate dihydrate, 617 mg of anhydrous citrate or 840 mg of the nonahydrate. The orotate is about 2.4 times the mass of the anhydrous citrate and 1.8 times the mass of the nonahydrate for the same element. Powder mass for an elemental magnesium dose · planning figures at the range midpoint | Elemental magnesium | Orotate, 6.6% | Citrate, anhydrous 16.2% | Citrate, nonahydrate 11.9% | Orotate against anhydrous citrate | 50 mg | About 758 mg | About 309 mg | About 420 mg | About 2.4 times | 100 mg | About 1,515 mg | About 617 mg | About 840 mg | About 2.4 times | 200 mg | About 3,030 mg | About 1,235 mg | About 1,681 mg | About 2.4 times These are planning figures. At the edges of the range, 100 mg needs 1,470–1,560 mg of orotate, 610–690 mg of anhydrous citrate or about 840 mg of the nonahydrate. The certificate's as-is magnesium is the number the fill calculation needs, not the midpoint. ## What it does to the capsule and the stick A size 00 capsule holds about 0.95 mL. At 0.6–0.7 g/mL it carries 570–665 mg of powder, which is 38–44 mg of magnesium as orotate or 92–108 mg as anhydrous citrate. A 100 mg claim therefore needs two to three size 00 capsules of orotate, against one capsule of the citrate at the same fill. A 1,000 mg tablet of orotate delivers 64–68 mg of magnesium; a 1.5 g tablet or a sachet is the realistic way to reach 100 mg. The stick pack is the harder format. One and a half grams of a slightly soluble powder in a small volume leaves sediment unless the grade is milled and the formula is built as a suspension. The citrate dissolves and is the easier choice for a clear drink. Granulation helps flow and dust, not solubility. The magnesium lactate page is the other soluble option to compare. ## What the panel has to say The panel declares the element; the ingredient list names the salt. In the EU the declaration is in milligrams and as a share of the 375 mg reference intake; in the US it is in milligrams against the 420 mg Daily Value. A 100 mg dose supplies 26.7% of the EU reference intake and 23.8% of the US Daily Value, for either salt. The salt weight and the element weight have to agree. One gram of the dihydrate carries 64–68 mg of magnesium, so a label that declares 1,000 mg of magnesium orotate and 100 mg of magnesium is internally inconsistent; 1,000 mg of anhydrous citrate, by contrast, carries 145–164 mg. The label must name the hydrate if the specification does, and the nutrition declaration must use the certificate's figure, not the midpoint of a catalog range. ## Which salt for which format Choose the orotate when the label names magnesium orotate, the format is a capsule or a tablet, and the fill can carry about 1.5 g per 100 mg of magnesium. It is a poor fit for a clear drink at a meaningful dose, because the solubility limit arrives before the dose does. Choose the citrate when the format is aqueous, the fill weight is tight, or the label already names the citrate. A decision on magnesium percentage alone is not enough; weigh the mass per dose, the as-is figure, solubility, fill and label space. Either direction is a change control: refill trial, fresh stability work, a new nutrition declaration and new artwork. The product hub carries the catalog specification; the grades page places the comparison in the wider salt range; the magnesium citrate page carries the other specification; the compliance page covers the market route. ### 01 What the COA for magnesium oxide actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-oxide/coa/ Reviewed: 2026-11-19 A magnesium oxide batch certificate lists appearance, an IR and titration identity check, a complexometric assay, the elemental magnesium figure, loss on drying, acid-insoluble matter, the heavy-metal panel, microbiology and particle size. The document is useful only when every line shows the method, the release limit and the result obtained for that lot. The values below are the catalog limits; the COA is what ties them to a specific pack. In one lineThe assay and the magnesium figure are two views of the same powder, and the certificate is only complete when the basis, the acid-insoluble matter and the grade sit beside them. ## What a batch certificate reports Two things have to be visible on the page: which material was made, and what the laboratory found in the lot. The first is a matter of name, CAS number and identity test. The second is a set of measured values. A sheet that supplies one without the other cannot support a release decision. Identity, assay, physical tests and contaminants · magnesium oxide | Parameter | Method | Release limit | Appearance | Visual | White powder | Identification | IR plus complexometric titration | Matches the reference | Assay (as MgO) | Complexometric titration | ≥96.0% | Magnesium (Mg) | Complexometric titration | 57.0–60.0% | Loss on drying | Gravimetric | ≤0.5% | Acid-insoluble matter | Acid digestion, filtration and ignition of the residue | ≤0.1% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh Some lines carry more information than others. Assay and magnesium are two calculations from one measurement; moisture is a handling signal; acid-insoluble matter exposes silicate or ore residue that a purity figure would not show. ## Assay, magnesium figure and the basis The elemental figure is not an independent purity test. It is the assay restated as magnesium. In MgO the magnesium fraction is 24.305 ÷ 40.30 = 60.3%, so a 96.0% oxide contains 57.9% magnesium, which falls inside the catalog range of 57.0–60.0%. A certificate showing 96.0% assay beside 54.0% magnesium is either mixing two bases or carrying an error. Ask which basis the assay uses: as received, dried or ignited. Ignition turns magnesium hydroxide and magnesium carbonate back into oxide before titration, so an ignited result describes the magnesium present and not the anion that was there. This is how a carbonated lot can satisfy an ignited assay while its as-is assay and ignition loss point elsewhere. The moisture line needs the same care. The catalog limit is ≤0.5%, measured gravimetrically. That test drives off free water; it does not decompose hydroxide or carbonate, which release water and carbon dioxide at higher temperature. When a lot has been stored in a humid room or an opened container, request loss on ignition or a carbon dioxide determination as well. The drying result alone cannot answer the carbonation question. ## Limit, result and the gap between them A limit is the boundary for release; a result is what the bench measured. They need separate columns, and the method has to be named. Copying the specification range into the result column hides the very information the certificate exists to provide. What the result column should contain | Parameter | Release limit | Result column | Assay | ≥96.0% MgO | Measured percentage, with basis and titration method | Magnesium | 57.0–60.0% | Measured percentage, with the method used | Loss on drying | ≤0.5% | Measured percentage and drying condition | Acid-insoluble matter | ≤0.1% | Measured percentage, with the ignition step described | Heavy metals | Per element | Measured mg/kg for each element | Microbiology | Counts and absence | Count and absence statement for the lot | Particle size | ≥95% through 40 mesh | Measured percentage through the sieve “Passes specification” is a verdict, not evidence. A heavy-metal result belongs per element rather than as a sum; microbiology needs both a count and an absence statement; particle size needs the measured percentage through the sieve, not an adjective. ## Where one lot differs from the next Source and calcination are the first variables. A precipitated oxide, a ground oxide and a dead-burned oxide may all satisfy the magnesium figure while behaving unlike one another in a blend. Precipitation leaves a light, high-surface-area powder; grinding leaves a denser one; dead-burning leaves a low-surface-area material nearer to a refractory than to a supplement source. The certificate should identify the route, not just the formula. Milling and sieving explain the particle-size result. Because 40 mesh is a finishing step, the number can move when the mill or the screen changes and the chemistry does not. Bulk density and flow never appear on the catalog sheet, yet they control how much powder goes into a capsule and whether a tablet press runs smoothly. Storage and ore explain the other two lines. An opened bag in a damp room takes up water and carbon dioxide, so the as-is assay falls while an ignited result may stay put. A climbing acid-insoluble value points to silicate or ore residue. Neither shift shows up in a single assay percentage; they emerge when several lots are plotted together. ## When a second laboratory earns its place Independent testing makes sense for an unfamiliar source, a first shipment into a regulated market, a grade dispute, or a lot whose physical behaviour contradicts its certificate. The panel should answer the open question rather than duplicate the supplier's assay: XRD for periclase, brucite or magnesite; FTIR for carbonate and hydroxide; moisture and ignition loss on the same sample; acid-insoluble matter; ICP-MS for the metal panel; and ion chromatography for chloride or sulfate when a different magnesium compound is possible. Every screen should come with its detection limit. A “not detected” entry without a limit says something about the method's reach, not about the sample. Traceability matters too: the material tested should be the material retained, and the report should name the lot and the pack. For a disputed result, send the retained sample, the supplier's certificate and the specification to the referee, and ask for the tests that distinguish oxide from hydroxide, carbonate or silicate. Repeating the assay will not resolve a question about grade. ## Six lines for a supplier comparison Compare source and grade; assay and basis; magnesium figure; moisture and ignition loss; acid-insoluble matter with the metal panel; and particle size with bulk density. Quotations that match on assay but diverge on source or bulk density are not offers for the same powder. Traceability is the second layer. The certificate should identify the manufacturer, the calcination route and the milling step, and its lot code should match the pouch, the drum and the retained sample. The catalog specification is on the magnesium oxide hub. The identity page covers the tests that separate oxide from carbonate or refractory material; the grades page explains the source choices; the EDTA titration note sets out the assay; the quality page describes the release file. ### 02 Precipitated, ground or dead-burned: choosing a magnesium oxide grade URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-oxide/grades/ Reviewed: 2026-11-19 Magnesium oxide is one formula, MgO, but not one grade. The commercial material is defined by its source and calcination: a precipitated, light oxide; a ground, denser oxide; a dead-burned, low-reactivity oxide; or a granulated powder made from one of them. The grade changes the bulk density, the acid reaction and the fill long before it changes the assay, so a purchase order that names only “magnesium oxide 96%” has not specified the powder. In one lineThe grade is the source and the calcination, not the formula: it changes the bulk density, the acid reaction and the fill before it changes the assay. ## Why the same formula behaves differently Magnesium oxide is made by calcining a magnesium precursor. When the precursor is precipitated magnesium hydroxide, the oxide inherits a light, porous structure with a high surface area. When the precursor is natural magnesite, the calcined material is denser and is usually milled to size. When the calcination runs at a high temperature, the crystals grow and the surface area collapses; that is the dead-burned material used in refractories, not the material a supplement formulator wants. The chemistry is the same in all three cases: the powder is magnesium oxide. What changes is the surface the acid can reach. A light oxide presents more surface per gram, so a dilute acid reacts with it faster. A dense or dead-burned oxide presents less, so the same acid test moves slowly. The assay can be identical while the behaviour in a blend is not. The catalog form here is a white powder, ≥95% through 40 mesh, with granulation available on request. It does not name the source or the bulk density. Those are the two questions to settle before the specification is fixed. ## The grades side by side Magnesium oxide grades and what changes | Grade | Source and route | Physical behaviour | Fits | Precipitated, light | Precipitated hydroxide, calcined at a moderate temperature | High surface area, low bulk density, dusty, fast acid reaction | Powder blends and suspensions where a fast reaction is wanted; often granulated before filling | Ground, dense | Calcined magnesite, milled and sieved | Higher bulk density, better flow, slower acid reaction | Capsules, tablets and dry blends where fill and flow matter | Dead-burned | High-temperature calcination | Very low surface area, hard, chemically inert | Refractory and industrial uses; not a supplement source | Granulated | Agglomerated from a light or dense powder | Free-flowing, low dust, slower dispersion | High-speed filling and blends that cannot tolerate dust The table is a starting point, not a catalogue of trade names. Suppliers use “light”, “heavy”, “caustic-calcined” and “dead-burned” in different ways, and a certificate may name none of them. Ask for the source, the calcination route and the bulk density in writing, then check that the sample matches the description. ## Surface area, bulk density and the acid reaction Surface area is the variable that connects the grade to the acid reaction. A light oxide with a high surface area begins reacting as soon as it meets dilute acid; a dense oxide wets more slowly; a dead-burned oxide barely reacts on the same timescale. This is a physical difference, not a purity difference, and it survives an assay that reads the same for all three. Bulk density is the variable that connects the grade to the fill. A light powder occupies more volume per gram, so a capsule holds less magnesium oxide and the fill weight falls. A dense or granulated powder pours better and fills a fixed volume more consistently. Neither is automatically better; the dosage form decides which one is workable. An in-house acid-consumption check is useful when the grade is in doubt. Weigh a sample into dilute acid, hold it at a fixed temperature and record the time to clear or the acid consumed over a set interval. The test is not a compendial release method, but it separates a light oxide from a dead-burned one faster than an assay does. Agree the conditions before the first lot, so the numbers can be compared across suppliers. ## Dose arithmetic and the fill The label dose is elemental magnesium, not magnesium oxide. At the catalog floor of 57.0% Mg, a 500 mg oxide capsule delivers 285 mg of magnesium; at 60.0% it delivers 300 mg. Working the other way, 250 mg of elemental magnesium needs 250 ÷ 0.58 = 431 mg of oxide at a midpoint of 58.0%. Those are arithmetic examples from the catalog range, not batch results. The same 431 mg is a different volume depending on the grade. A light oxide at a low bulk density may not fit the capsule that the label dose assumes; a dense or granulated oxide may fit, but it reacts more slowly in an acid test. The formulator has to choose which constraint is binding: the capsule size, the acid reaction or the flow on the filling line. The grade also matters in a powder blend. A light oxide can dust and segregate, and it can absorb moisture from the other ingredients; a granulated oxide is easier to blend but slower to disperse. For a tablet, the compression behaviour and the particle-size distribution belong in the specification, not only the mesh line. ## What to write into the specification - “Magnesium oxide, CAS 1309-48-4, MgO, source and calcination route named.” - “Assay ≥96.0% as MgO by complexometric titration; magnesium 57.0–60.0%.” - “Loss on drying ≤0.5%; acid-insoluble matter ≤0.1%.” - “Particle size ≥95% through 40 mesh; bulk density range agreed on the qualification sample.” - “Acid-consumption or time-to-clear check agreed as an in-house grade check.” - “Heavy metals and microbiology as listed; no dead-burned material.” The source, the bulk density and the acid-reaction check are the three lines that turn a formula into a grade. A certificate that reports only assay and mesh has not described the powder you will fill. ## When this grade is the wrong choice If the formula needs a clear solution, magnesium oxide is the wrong starting point: it is practically insoluble in water and only dissolves in acid. A soluble salt such as magnesium citrate is the material for a clear drink. If the formula needs an acid reaction that produces gas, the carbonate is the chemistry to look at, not the oxide. If the capsule volume is the binding constraint, a dense or granulated oxide is the practical choice; a light oxide may force a larger capsule or a lower dose. If the acid reaction must be fast and the powder must also flow, granulation is the compromise, but the granule has to be tested for dispersion rather than assumed to behave like the parent powder. The product hub carries the catalog specification. The certificate lines are on the COA page; the oxide-versus-carbonate comparison is on the level-four page; the identity tests that catch a dead-burned or carbonated lot are on the identity page; the release workflow is on the quality page. ### 02.1 Magnesium oxide vs magnesium carbonate: elemental magnesium and the acid reaction URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-oxide/grades/magnesium-oxide-vs-carbonate/ Reviewed: 2026-11-19 Magnesium oxide and magnesium carbonate both react with acid to release the magnesium ion, but they are not interchangeable on a label or on a balance. The oxide is about 60.3% magnesium by mass and is specified here at 57.0–60.0%; the anhydrous carbonate is 28.8% magnesium, and the basic hydrated carbonate sold in commerce sits near 25%. Per gram, the oxide carries roughly twice the magnesium and roughly twice the acid-consuming capacity, and the carbonate answers the acid with carbon dioxide gas. In one lineThe oxide carries about twice the magnesium and twice the acid-consuming capacity per gram; the carbonate answers with gas, and the fill weight follows the figure. ## The elemental magnesium figures Start with the formula. Magnesium oxide, MgO, has a molar mass of 40.30 g/mol, of which 24.305 g/mol is magnesium: 60.3% by mass. Magnesium carbonate, MgCO3, has a molar mass of 84.31 g/mol, so the same magnesium is 28.8% of the anhydrous carbonate. The carbonate is heavier because it carries carbon and oxygen that the label does not count as magnesium. Magnesium oxide against magnesium carbonate | Property | Magnesium oxide | Magnesium carbonate | Formula | MgO | MgCO3 | Molar mass | 40.30 g/mol | 84.31 g/mol | Magnesium, theoretical | 60.3% | 28.8% anhydrous; about 25% in the basic hydrate | Magnesium, catalog | 57.0–60.0% | Not specified on this site; confirm with the supplier | Magnesium in 500 mg | 285–300 mg | About 125–144 mg | Acid consumed per gram | About 49.6 mmol H+ | About 23.7 mmol H+ The last row is stoichiometry, not a performance claim. One mole of either compound consumes two moles of acid. A gram of oxide contains more moles of magnesium, so it consumes more acid per gram; the ratio is 40.30 versus 84.31, about 2.1 to 1. ## The acid reaction, with and without gas In dilute acid, magnesium oxide takes up two protons and forms the magnesium ion and water: MgO + 2H+ → Mg2+ + H2O Magnesium carbonate takes up the same two protons, but the carbonate part leaves as carbon dioxide: MgCO3 + 2H+ → Mg2+ + H2O + CO2 The gas is the practical difference. One gram of anhydrous carbonate can release about 0.52 g of carbon dioxide, and that gas has to go somewhere. In an open blend or a stick pack mixed with water, it escapes and the powder effervesces. In a tablet, a capsule or a sealed pouch with residual moisture, it can pressurise the pack, open the seams or swell a tablet. The oxide produces no gas on the same reaction, so it is the simpler choice when a sealed pack must stay flat. Both reactions release heat and consume acid; the oxide leaves water, the carbonate leaves water and gas. A switch changes the headspace, the pack pressure and the acid demand, not only the magnesium figure. ## What controls the rate Neither material is fast-dissolving in neutral water. Both are only sparingly soluble, and both rely on acid to dissolve. The rate is therefore a surface question: particle size, surface area and the grade of the powder decide how quickly the acid reaches the solid. A light, precipitated oxide has a high surface area and reacts quickly in a dilute acid test. A dense, ground oxide has less surface per gram and reacts more slowly. A dead-burned oxide has very little surface and is close to inert. The carbonate has its own particle-size and hydrate profile; a fine carbonate reacts faster, and the gas can disturb the bed and change the local mixing. Acid strength, temperature, stirring and the solid-to-liquid ratio all move the result. If the rate is important to the formula, agree a time-to-clear or acid-consumption method with the supplier and run it on the qualification sample; do not compare a certificate's mesh line with a reaction rate. ## The fill weight follows the figure A label dose of 250 mg elemental magnesium needs 250 ÷ 0.58 = 431 mg of oxide at a midpoint of 58.0%, or 250 ÷ 0.25 = 1,000 mg of a basic carbonate at about 25%. The carbonate dose is more than twice the mass for the same magnesium, and it is usually bulkier. That is a capsule-size and blend-weight decision before a chemistry one. A 500 mg capsule can carry 285–300 mg of magnesium as oxide, or about 125–144 mg as carbonate. To reach the same magnesium figure with the carbonate, the formulator needs a larger capsule, more powder per serving, or a different magnesium source. The oxide is the concentrated route; the carbonate is the dilute route. A light oxide at low bulk density may not fit the capsule that the label assumes; a dense oxide or a granulate may fit but react more slowly. The carbonate's gas can also affect a tablet's appearance and the seal of a sachet. The fill trial should use the exact grade and the exact pack, not a generic sample. ## What the label has to say The label declares the ingredient and the amount of magnesium, not only the weight of the salt. “Magnesium oxide 500 mg” and “magnesium 285 mg” are different statements, and the second is the figure the nutrient reference value is calculated against. The destination's labelling rules decide the format; the arithmetic is the same in every market. In the EU, the nutrient reference value for magnesium is 375 mg, so 285 mg is 76% of the NRV. In the United States, the Daily Value is 420 mg, so the same 285 mg is 68% of the DV. Those figures are for illustration, not a recommended intake. The finished product's dose and the destination rules set the label; the brand's reviewer confirms the wording. The ingredient name and the elemental figure have to match the certificate. If the label says magnesium oxide, the lot should be oxide, not a carbonate blend; if the label says magnesium carbonate, the oxide is not a drop-in. A change of magnesium source is a new specification, fill weight and label line, even when the elemental figure is held constant. ## When to choose which Choose the oxide when the formula needs the most magnesium per gram, when the pack must not generate gas, and when the capsule or tablet volume is the binding constraint. Choose the carbonate when the acid reaction is meant to produce gas, or when the formula is built around the carbonate's lower magnesium density and the fill has room for it. Neither choice is a product claim; it is a decision about mass, gas and handling. For a clear solution rather than a suspension, neither material is the starting point. Magnesium citrate is the soluble comparison. The carbonate side of the current catalog is represented by calcium carbonate; the chemistry on this page is magnesium carbonate, and the same acid-and-gas logic applies to both carbonates. The product hub carries the catalog specification. The parent grades page places this comparison in the wider range; the COA page shows how the magnesium figure is reported; the identity page gives the tests that separate an oxide from a carbonate; the methods library explains the titration and diffraction methods; the quality page describes the release workflow. ### 03 Magnesium oxide takes up moisture and carbon dioxide; the pack sets the shelf life URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-oxide/stability/ Reviewed: 2026-11-19 Magnesium oxide is a dry mineral powder, not a light-sensitive organic material. Its storage problem is moisture and carbon dioxide: the surface slowly converts to magnesium hydroxide and magnesium carbonate, the as-is assay falls, the loss on drying and loss on ignition rise, and the acid reaction slows. A sealed, moisture-barrier pack and a dry store keep the lot inside its specification; the certificate does not. In one lineMagnesium oxide does not degrade in light; it picks up moisture and carbon dioxide, and the sealed pack is what keeps the assay and the acid reaction where they were. ## The powder: moisture and carbon dioxide The catalog sets loss on drying at ≤0.5%. That is a release gate for free moisture, not a carbonation test. Once the foil pouch is opened, the powder can take water from the air; the same surface can then take carbon dioxide and form a carbonate or a hydroxy-carbonate layer. The as-is assay falls because the surface is no longer pure oxide, while an ignited assay may hold. Surface area is a main control on how fast this happens. A light, precipitated oxide with a high surface area has more exposed material per gram than a dense, ground oxide, so it can pick up moisture and carbon dioxide faster on the same shelf. A granulated powder exposes less surface and flows better, but the granule can still absorb moisture in the bag. The pack and the grade belong in the same storage discussion. Light is not the driver here. Magnesium oxide is a white inorganic powder and does not have the photochemical degradation route of an organic ingredient. A yellow or brown tint is more likely to come from iron or contamination than from light, and it is a reason to ask for the source record. ## The slurry and the acid-dissolved stock Magnesium oxide is practically insoluble in water. A “solution” made by stirring the powder into water is a suspension, and the solid settles; the slurry is alkaline because the surface forms magnesium hydroxide. The suspension is not a clear beverage base, and its stability is a physical question as much as a chemical one. Dissolving the oxide in acid gives a different material: a magnesium salt solution with a pH and an anion that depend on the acid used. That stock is no longer magnesium oxide, and it should not be labelled or specified as the oxide. The acid-dissolved route also brings corrosion, pH adjustment and a much higher water activity into the process. For a clear liquid, a soluble salt such as magnesium citrate is the simpler starting material. In a suspension, the formula's acid components can react with the oxide during storage. A citric-acid or ascorbic-acid component will neutralise the surface, raise the pH and reduce the acid reaction that remains. The formulation has to be tested as a whole, not as a powder plus a liquid. ## What drives the change Factors that move magnesium oxide during storage | Factor | What it does | Control | Humidity | Water adsorbs on the surface; loss on drying rises; hydroxide can form | Foil pouch or lined drum; dry store; reseal after opening | Carbon dioxide | Surface carbonate forms; as-is assay falls; acid reaction slows | Sealed pack; limit air exchange; use within the in-use period | Heat | Accelerates moisture migration and the reaction at the surface | Controlled warehouse; avoid hot loading bays and direct sun | Acid | Consumes the oxide and changes the local pH | Keep acidic actives separate; test the blend, not only the powder | Particle size | Finer powder has more surface and reacts faster | Specify the mesh and the bulk density; qualify the grade | Metal contact | Iron or other metals can tint the powder and catalyse side reactions | Stainless contact; avoid iron and copper in the process A warm, humid store with an opened pouch combines water, carbon dioxide and heat in the same surface layer. A dry, sealed pack at a controlled temperature removes most of the driving force, even when the powder is a light grade. ## A stability protocol for the ingredient A useful protocol names the pack, the storage condition, the time points and the tests. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% relative humidity cover the warehouse; accelerated storage at 40 °C/75% relative humidity stresses the pack. For a powder that picks up moisture, a humidity challenge at the upper end of the warehouse range is more informative than a dry oven. Test assay, magnesium, loss on drying, loss on ignition, acid-insoluble matter, acid-consumption rate, appearance, identity and microbiology at each point. Loss on ignition is the line that catches hydroxide and carbonate that the drying test cannot see. For a blend with an acidic active, repeat the work on the blend at the same water activity; the reaction may happen before the pack is sealed. The report should show individual results, not only a pass statement, and it should identify the pack, the lot family and the grade. A stability summary for a different pack from the same product family is not evidence for the pack you will buy. ## The finished formula changes the answer A capsule or tablet has low water activity, but the shell, the excipients and the process can still transfer moisture. A direct-compression blend with an acidic active can react at particle contacts if it picks up water during granulation or storage. Check the tablet hardness, the appearance and the acid reaction after storage, not only the assay of the powder that went in. A stick pack or sachet depends on the seal and the foil. A pinhole lets in humid air, and the powder nearest the pinhole carbonates first. A beverage or a suspension combines water, acid and a large surface area; the powder's bulk stability is only the starting point. The formulator decides whether an overage is needed; that is a label decision, and it does not repair a pack that lets moisture in. Granulation can improve flow and reduce dust, but it adds a binder and a drying step. The granule's dispersion and acid reaction have to be measured, not assumed from the parent powder. A granulated oxide that no longer disperses in the acid test is a different ingredient for the formula, even if the assay is unchanged. ## How the shelf life is set We do not publish one shelf-life number for magnesium oxide, because the pack and the storage condition set it. The retest period belongs on the specification and is supported by the stability file for that pack and grade. A number without a pack, condition and test panel is not a shelf life; it is a claim. After the retest period, re-assay the retained sample before extending use. Check loss on ignition and the acid reaction as well as the assay; a lot can hold its magnesium figure while its surface changes. Do not extend by assumption or carry a bulk figure to a repacked container. The product hub lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the XRD method note describes the solid-state check; the quality page describes the release workflow. ### 04 Magnesium oxide: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-oxide/moq/ Reviewed: 2026-11-19 The MOQ for magnesium oxide is 1 kg, supplied as a 1 kg foil pouch; the standard bulk pack is a 25 kg fiber drum. Lead time is 1–7 days for the standard pack. A firm quotation needs six pieces of information: the grade and source, the assay basis and magnesium figure, the quantity and pack, the destination and Incoterm, the documents, and the intended use and market. In one lineOne kilogram is the smallest pack that can be sampled, tested and traced as a lot; the 25 kg drum is a production unit, not a volume incentive. ## Why the minimum is 1 kg A 1 kg pack covers a bench-scale trial, a retained sample and an independent identity test. It is also small enough to ship as a parcel, which matters when a formulator needs material before the production plan is fixed. The pack is a commercial unit with a lot code, not a scoop from a bulk drum. Below 1 kg, the material is usually split from a larger lot and repacked. That adds handling, loses the original pack identity and makes traceability harder, without changing the chemistry. The 25 kg drum is the bulk unit: it reduces handling per kilogram and commits inventory for a longer storage period. The minimum is a pack decision, not a volume test. One kilogram is a useful trial quantity for either grade, but the grade matters more than the weight. A light, precipitated oxide at low bulk density delivers less mass per capsule than a dense, ground oxide, so a kilogram fills more capsules. The trial should use the grade that the production order will use, or the fill result will not transfer. ## Packs and formats Standard magnesium oxide packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal after opening; lot code on the pouch | Fiber drum | 25 kg | Production | Inner liner; keep the liner closed; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Binder and particle profile change; acid reaction may slow | Split pack | On request | Bench trial | Repack from a bulk lot; document the new pack identity The catalog form is a 40 mesh powder: ≥95% through 40 mesh. Granulation is a different physical specification, not a packing choice. If the filling line needs a free-flowing granule or the blend cannot tolerate dust, say so before the quotation, because the change moves the particle-size line, the bulk density and possibly the lead time. The pack should match the storage plan. A 25 kg drum that will be opened repeatedly over months is a different risk from a 1 kg pouch used in one trial. If the drum will be opened in a humid room, ask for the liner specification and plan to use the contents within the agreed in-use period. ## Lead time and dispatch The standard pack is quoted at 1–7 days from order confirmation. That window covers picking, document preparation and dispatch; it does not include shipping transit, customs clearance or the customer's own quality release. A custom granulation, a split pack or a non-standard document set adds time, and the quotation should state it separately. Confirm the magnesium oxide dispatch date at order; the 1–7 day lead time is a window rather than a date. One kilogram goes as a parcel and the drum as pallet freight; the Incoterm settles who arranges carriage and who clears customs. The COA and SDS should travel with the lot code so the receiving site can match the source and calcination route. A granulated or split pack is prepared separately, so its date may be later. ## What a quotation needs Six items make a quotation firm enough to compare: - Product and grade. Magnesium oxide, CAS 1309-48-4, with the source and calcination route named. - Specification. Assay and basis, magnesium figure, loss on drying, acid-insoluble matter, particle size and bulk density. - Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated or split variant. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, specification, SDS, and any market-specific statement the importer needs. - Intended use and market. Supplement, food or another use, and the market where it will be sold. A quotation without the grade and the market is incomplete. The same formula can meet one destination's file and sit outside another's, and the source and calcination route are part of the offer. Commercial terms are stated on the quotation, not on this page. ## The sample is a lot, not a demonstration The 1 kg pack is the qualification sample. Test identity, assay, magnesium, loss on drying, acid-insoluble matter and microbiology before scaling, and keep a retained sample from the same pack. The lot code on the sample, the COA and the quotation should match. A sample that cannot be traced to a lot is a demonstration, not a qualification. The sample should also be tested in the intended form. A capsule fill trial, a tablet compression trial or an acid-consumption check on the sample will show whether the grade fits the process. A certificate alone cannot show how the powder flows or how fast it reacts. If the project needs less than 1 kg for a bench trial, discuss it before ordering. A split from a bulk lot is a repack with its own traceability, not the catalog pack, and it should be documented as such. Do not assume that a bench sample and the production drum will come from the same lot. ## Terms to settle before the first order Magnesium oxide offers are not comparable on the MgO percentage alone. The offer should state the delivery term, the shipping window and the pack, whether 1 kg pouch or 25 kg drum. Beside them go the revision in force, what each COA must report, the sample held on file and the retest point. Add the source and calcination route, because they set bulk density and acid reaction. A quality agreement covering the change-control route from light precipitated powder to granulated oxide is worth having before the first production run. A magnesium oxide return turns on the grade and the test, not on the powder's colour. Keep the retained sample, re-test assay, magnesium, loss on drying and acid-insoluble matter together, and run the acid-consumption check on the same portion if flow or reactivity is the complaint. The source and calcination route decide how the lot behaves, so the claim should name them. The quotation and quality agreement are the place to fix the laboratory and the party that funds the referee test. The product hub carries the catalog specification; the COA page lists the release tests; the compliance page covers the market files; the MOQ glossary entry defines the term; the quality page describes the release workflow. ### 05 The regulatory file for magnesium oxide URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-oxide/compliance/ Reviewed: 2026-11-19 Magnesium oxide is supplied as MgO, CAS 1309-48-4. The catalog specification is the starting point; the regulatory file is built around the exact grade, the destination and the finished-product route. This page lists the instruments, limits and documents that belong in that file. The buyer's regulatory team confirms the route for the destination before the label or the claim is fixed. In one lineThe specification describes the material; the regulatory file shows the destination route, the contaminant calculation and the label, and the buyer's team confirms it. ## What the file contains The file answers four questions. What is the material, and which specification version is being bought? Which lot is being released, and what does its certificate report? Which limits and label rules apply to the finished product? And what changes if the source, the calcination route or the pack changes? The COA answers the lot question, the TDS the specification and the SDS the handling; none answers the route question alone. The file should also contain the origin record, allergen and GMO statements, the residual-solvent statement and any customer declaration. Magnesium oxide is an inorganic mineral, so several of those statements are short; they still belong in the file, dated and versioned. A document list with revision numbers is more useful than a folder of undated PDFs. The grade belongs in the regulatory description as well as the commercial one. A dead-burned oxide and a precipitated oxide share a CAS number and a formula, but they are not the same material for a supplement file. Name the source and calcination route in the specification and hold them under change control. ## European Union First check Directive 2002/46/EC on food supplements. Annex II is where the permitted forms of vitamins and minerals are listed; the buyer's regulatory team confirms the current entry for magnesium oxide and the conditions that apply to the finished product. The directive sits alongside general food law, labelling and contaminant rules; the current consolidated text is the reference, not a summary. Magnesium oxide also has a food-additive entry, E 530, under Regulation (EC) No 1333/2008. The additive and food-supplement routes are separate: an additive use in one food category is not automatically covered by a supplement file in another. The buyer's team confirms which route the finished product uses and whether the grade and the use level fit it. Labelling follows Regulation (EU) No 1169/2011 and the supplement-specific rules; claims follow Regulation (EC) No 1924/2006. The nutrition declaration, the source name and the elemental magnesium figure have to agree with the certificate and with the dose per portion. A change of grade can change the particle size and the fill without changing the label, but a change from oxide to carbonate changes the label line. ## United States The US route for a dietary supplement is the dietary-supplement framework, with current good manufacturing practice under 21 CFR Part 111 and the Supplement Facts panel under 21 CFR 101.36. The supplier should be able to name the basis it relies on for the ingredient and point to the supporting document. The buyer confirms that the basis covers the finished product and the intended use. This page does not assert a GRAS or grandfathered basis for magnesium oxide, and it does not read a food-additive listing as a supplement authorisation. The routes are different; the basis belongs in the supplier's file, not a catalogue description. If a specific basis is documented for the grade, it should be stated in the specification and reviewed for the destination. The US Daily Value for magnesium is 420 mg, and the tolerable upper intake level for supplemental magnesium is 350 mg/day for adults. They are used for the label and the finished-product check; they are not targets and do not replace the destination's rules. ## Contaminants and the finished-product calculation The contaminant panel is a finished-product calculation, not only a drum result. The table below is the starting point for a food-supplement file; the current destination text and the daily dose decide the final limit. The certificate should report a measured figure per element, with the method. Contaminant limits to confirm for the finished product | Parameter | Typical supplement reference | What the file should show | Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method and the finished-product calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception that applies | Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result and method | Arsenic (As) | Customer or market limit | The agreed limit and the method, stated on the certificate The EU figures come from Regulation (EU) 2023/915; the US has no single harmonised set for all supplements, so the customer limit and state or federal rules have to be checked. The calculation uses the ingredient in the daily serving, not the drum. A lot that passes the drum limit can still fail the finished-product calculation if the dose is high. Do the arithmetic before the label is written. A 500 mg magnesium oxide capsule at the catalog floor of 57.0% Mg delivers 285 mg of elemental magnesium. The EU tolerable upper intake level for supplemental magnesium is 250 mg/day for readily dissociable magnesium salts, and the US level is 350 mg/day for supplemental magnesium. Whether a given oxide grade falls inside the EU category is part of the destination review; the calculation itself is not optional. ## Claims and the label The label names the material, the amount of elemental magnesium and the source in the form the destination requires. The claim review is separate. The EU claims register contains authorised magnesium nutrient-function claims, but use depends on the dose per portion, the food category and the exact wording. The brand's regulatory reviewer confirms that wording for the finished product; this page does not approve or repeat a claim. No disease-related claim is made for magnesium oxide here. A certificate does not approve a claim, and a claim does not change the specification. The label and the certificate should use the same ingredient name, elemental figure and basis. ## Documents the file needs - Specification with the revision, the source and the calcination route named. - Batch COA with assay, magnesium, loss on drying, acid-insoluble matter, contaminants and microbiology. - Technical data sheet and safety data sheet for the grade. - Particle-size and bulk-density data on the qualification sample. - Origin record and a statement that the material is mineral in origin. - Allergen and GMO statements, including a statement that no organic solvent is used. - Packaging declaration and the change-control route for source, route and pack. ## Checklist before the first order - Specification version, CAS number and grade are named. - COA, TDS, SDS, origin, allergen and GMO statements are on file. - The contaminant results are converted to the finished-product dose. - The label and the claim have been reviewed for the destination. - The source, calcination route and pack are under change control. - The quotation, the specification and the certificate refer to the same version. The product hub carries the catalog specification. The COA page explains the lot certificate; the identity page covers the analytical evidence; the ICP-MS method note describes the contaminant panel; the EU regulatory note gives the framework references; the quality page describes the release file. ### 06 How to prove a magnesium oxide lot is the oxide URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-oxide/identity/ Reviewed: 2026-11-19 A magnesium oxide lot is the oxide when four lines agree: the document names MgO and CAS 1309-48-4, the identity test matches the reference, the magnesium figure is consistent with the assay, and the mass balance closes with the loss on drying and the acid-insoluble matter. The assay alone cannot separate the oxide from a hydroxide, a carbonate, a silicate or a dead-burned grade. The magnesium-to-assay ratio is the first check and needs no extra test. In one lineIdentity is the agreement of the magnesium figure with the assay, the IR or XRD pattern and the mass balance, not the word “magnesium oxide” on the certificate. ## The four identity layers A certificate can name the right material and still fail to prove it. The layers below are separate questions, and each needs its own evidence. A supplier who answers only the first has described the paperwork, not the powder. Four layers of magnesium oxide identity | Layer | Question | Test | What it proves | Document | Is the material named? | Name, CAS number, formula, source | Paperwork only | Spectroscopy | Is the solid the oxide? | IR, or XRD for the crystalline pattern | The chemical form, not the purity | Magnesium ratio | Does the magnesium match the assay? | Complexometric titration or ICP-OES | Consistency of the two figures | Mass balance | Is it diluted or altered? | Loss on drying, loss on ignition, acid-insoluble matter | Consistency of the whole sheet The catalog identity line is “IR and titration conform”. That is a starting point. IR can show a carbonate or a hydroxide band, and titration supplies the magnesium figure, but neither one alone proves the solid-state form. XRD is the stronger check when the grade or the source is in dispute. ## The magnesium ratio: the first identity check Magnesium oxide is 60.3% magnesium by mass: 24.305 ÷ 40.304. A 96.0% MgO lot therefore carries 57.9% magnesium, and a 99.0% lot carries 59.7%. The catalog range of 57.0–60.0% magnesium brackets those figures. Multiply the assay by 0.603 and compare it with the reported magnesium; if the two differ by more than the method uncertainty, the certificate is using two different bases or the material is not pure oxide. The ratio also flags the common alterations. Magnesium hydroxide is 41.7% magnesium, and magnesium carbonate is 28.8% on an anhydrous basis, so a hydroxide or carbonate layer lowers the magnesium figure rather than raising it. A lot that reports 60.0% magnesium with a 96.0% assay is not consistent on a single basis; it is more likely an as-is assay paired with an ignited-basis magnesium figure, and the basis question has to be settled before the lot is accepted. The assay method matters for the same reason. Complexometric titration with EDTA measures the magnesium ion after the sample is dissolved; if the sample is ignited first, any hydroxide or carbonate is converted to oxide before the titration. The result is a true magnesium figure but not a true oxide figure. Pair the titration with loss on ignition and a carbonate check when the history of the lot is unknown. ## X-ray diffraction and the solid-state form X-ray diffraction answers the question the assay cannot: which crystalline phases are present? Magnesium oxide gives the periclase pattern. Magnesium hydroxide gives brucite, and magnesium carbonate gives magnesite or a hydrated carbonate pattern. A scan that shows only periclase is consistent with the oxide; extra peaks are a reason to ask what the lot contains, not a reason to reject on the first line. Peak width adds a second piece of information. A light, precipitated oxide has small crystallites and broader peaks; a dead-burned oxide has larger crystallites and sharper peaks. The comparison is qualitative, but it separates a reactive grade from a refractory one when the supplier's description is vague. Ask for the reference pattern and the detection limit before reading a “match” statement; without them, the word “conforms” has no scale. XRD is not a routine release test for magnesium oxide, and a certificate that reports only “XRD conforms” without the pattern has added little. It is most useful for a new source, a disputed grade, or a lot whose acid reaction does not match the certificate. ## What adulteration looks like Common magnesium oxide substitutions and the signals | Adulterant or change | What it does | Signal | Test | Silica or talc | Raises the acid-insoluble residue and dilutes the magnesium | Acid-insoluble above 0.1%; magnesium low | Acid-insoluble matter, XRD, ICP-OES for silicon | Calcium carbonate or dolomite | Adds calcium and carbonate; lowers the magnesium figure | Calcium high; loss on ignition high | ICP-OES for calcium, FTIR, XRD | Hydroxide or carbonate layer | Forms on a wet or open lot; raises loss on ignition | Loss on drying or ignition high; acid reaction slower | Loss on ignition, FTIR, XRD | Dead-burned grade | Same formula, very low surface area and acid reactivity | Assay passes; acid test slow; sharp XRD peaks | Acid-consumption test, surface area, XRD | Another magnesium salt | Chloride or sulfate carries magnesium but not oxide | Conductivity high; chloride or sulfate detected | Ion chromatography, conductivity The list is not exhaustive, and a single signal is not proof. Silica raises the acid-insoluble figure but does not change the magnesium ratio much at a low level; a carbonate layer lowers the ratio and raises the ignition loss. Read the signals together, and ask for the test that separates the most likely substitution rather than a repeat of the assay. ## How to write identity into the specification - “Magnesium oxide, CAS 1309-48-4, MgO, source and calcination route named.” - “Assay ≥96.0% as MgO by complexometric titration; magnesium 57.0–60.0%; state the basis.” - “Identification by IR and titration; XRD pattern on request for a new source or a disputed grade.” - “Loss on drying ≤0.5%; loss on ignition reported; acid-insoluble matter ≤0.1%.” - “Particle size ≥95% through 40 mesh; bulk density and acid-consumption check agreed on the qualification sample.” - “No hydroxide, carbonate or silicate above the agreed limit; no dead-burned material.” ## Six questions for the supplier - Which source and calcination route produced this lot, and which grade name is on the certificate? - Is the assay calculated as-is, on the dried sample or on the ignited sample? - What is the measured magnesium figure, and does it agree with the assay at a 0.603 ratio? - What are the loss on drying, loss on ignition and acid-insoluble results for this lot? - Can you provide the XRD pattern, or the IR spectrum, for a new source or a disputed grade? - If the lot is disputed, will you accept a joint re-test on the retained sample? Six direct answers amount to an identity file. A single assay percentage does not. The product hub carries the catalog specification; the COA page shows where each figure sits on the certificate; the grades page compares the source and calcination routes; the XRD method note explains the solid-state check; the EDTA titration note describes the assay; the quality page describes the release workflow. ### 01 What the magnesium sulfate COA must show about the hydrate URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-sulfate/coa/ Reviewed: 2026-11-19 A magnesium sulfate certificate has to be read on the heptahydrate basis. The assay of ≥99.0%, the magnesium figure of 9.5–10.0% and the water of 48.0–52.0% are three views of the same molecule, and the identity rows should show the sulfate as well as the magnesium. The limits below are the catalog specification; the batch COA is the document that shows what a particular lot measured. In one lineOn a magnesium sulfate certificate the water figure is not an impurity: it is the hydrate, and the magnesium, sulfate and water lines have to agree on the same lot. ## The certificate as a test report For each line the reader needs the parameter, the method and the limit the lot was released against. A row that says only “conforms” reports a conclusion and withholds the evidence. The identity rows deserve particular attention here, because a magnesium titration confirms the metal but says nothing about the anion. Identity, assay, water and contaminants · magnesium sulfate heptahydrate | Parameter | Method | Release limit | Appearance | Visual | Colourless crystals or white powder | Identification | IR and titration; sulfate reaction | Conforms to the reference | Assay (heptahydrate basis) | Complexometric titration | ≥99.0% | Magnesium | Complexometric titration | 9.5–10.0% | Water | Karl Fischer | 48.0–52.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent The sulfate identity is usually shown by the barium chloride reaction: a white precipitate forms in acidified solution and does not dissolve in dilute acid. That line is what separates magnesium sulfate from magnesium chloride, magnesium citrate or magnesium oxide on paper. The assay titration will pass for any soluble magnesium salt, so the anion row is not a formality. ## The heptahydrate basis, the water and the magnesium figure The formula MgSO4·7H2O is 51.2% water by mass. That water is part of the crystal, not a contaminant and not a drying failure. The certificate should therefore say that the assay and the magnesium result are reported on the material as received. A dried-basis magnesium figure of about 20.2% is the anhydrous salt's content, not a richer heptahydrate, and a certificate that mixes the two bases has described two different powders. The magnesium and water lines move together. A properly sealed heptahydrate near the middle of the water range sits near 9.9% magnesium. A lot that reads 9.7% magnesium with 47.0% water does not fit the heptahydrate formula, and the certificate has to explain the gap. This is why the catalog fixes both a magnesium range and a water range, rather than a single assay number. Complexometric titration measures the magnesium and calculates the salt from it. It does not measure sulfate, and it does not prove the hydrate. The certificate needs the Karl Fischer result and an anion identity beside the titration, or the assay is only a metal count. ## Release limit versus batch result The release limit is the acceptance boundary. The batch result is what the laboratory measured. Both belong on the page, in separate columns, with the method named. A result column filled with the specification range is a copy of the gate, not a result. What each result column should contain | Parameter | Release limit | What the result column shows | Assay | ≥99.0% on the heptahydrate basis | A measured percentage and the basis | Magnesium | 9.5–10.0% | A measured percentage by titration | Water | 48.0–52.0% | A measured percentage by Karl Fischer | Sulfate identity | Conforms | The reaction or instrument result, with the reference | Heavy metals | Per element | A figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot A certificate that reports 9.8% magnesium, 51.0% water and 99.4% assay gives a reader a coherent picture. One that reports only 99.5% assay leaves the hydrate unverified. “Passes specification” is a conclusion the reader should be able to reach from the numbers, not a substitute for them. ## What moves between batches Crystallisation and drying move the water figure and the crystal size. A lot dried hard enough to fall below the 48.0% floor is a lower hydrate, not a more concentrated heptahydrate, and it should be rejected or re-specified rather than accepted as a bonus. Milling moves the particle-size result: the catalog powder is 40 mesh, while crystals are a separate offer. The chemistry can be unchanged while the handling behaviour is not. Sampling is the quiet source of variation. Magnesium sulfate heptahydrate is efflorescent, so a sample left open in a warm, dry room can lose water before the Karl Fischer test. The certificate may then describe a drier lot than the drum. Ask how the sample was handled and whether the water result came from a sealed subsample. Chloride, sodium and heavy metals follow the raw material and the process. A sulfate made from a different magnesium source can carry a different chloride profile, and the certificate should show the chloride result where the specification sets one. Colour is a weak indicator: colourless crystals and white powder cover a wide range of particle size and minor variation. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a disputed hydrate, or a suspicion that the lot is another magnesium salt. The useful panel is magnesium by complexometric titration, sulfate by ion chromatography or gravimetric barium sulfate, water by Karl Fischer, chloride by ion chromatography, sodium by ICP-OES, and XRD for the crystal phase. Add the heavy-metal panel and microbiology for a market release. The sulfate and magnesium results should be read as a pair. If the magnesium is high and the sulfate is low, the lot may carry magnesium oxide or magnesium chloride. If the sodium is high and the magnesium is low, sodium sulfate is the likely diluent. A “not detected” line needs the method's detection limit to mean anything. Keep the chain of custody short: the sample tested should be the retained sample, and the report should name the lot. When a result is contested, give the referee the retained sample, the supplier's certificate and the specification, and ask for the tests that separate the salts rather than a repeat of the same titration. ## What to compare between suppliers Put six lines side by side: the hydrate and CAS number; the assay and magnesium result with their basis; the water result; the sulfate identity; the heavy-metal and microbiology results; and the pack with its lot code. Two quotations that agree on assay but differ on water or anion are not describing the same material. The catalog line is on the magnesium sulfate product page. The identity page sets out the sulfate and water tests, the grade page covers the hydrate choice, the titration method note explains the assay, and the quality page describes the release file. ### 02 Heptahydrate, monohydrate or anhydrous: choosing a magnesium sulfate grade URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-sulfate/grades/ Reviewed: 2026-11-19 The magnesium sulfate grade is the hydrate. The catalog material is the heptahydrate, MgSO4·7H2O, specified at 9.5–10.0% magnesium and 48.0–52.0% water; the monohydrate and the anhydrous salt are different specifications with higher magnesium per gram. Within the heptahydrate, the second choice is crystal or 40 mesh powder. The grade changes the fill weight, the label arithmetic and the pack, not only the assay. In one lineThe grade is the hydrate: heptahydrate, monohydrate and anhydrous magnesium sulfate carry different magnesium per gram and need different specifications. ## Why magnesium sulfate comes in several grades The hydrate state is set by how far the crystallisation and drying steps are taken. The heptahydrate is the standard commercial form and the one described on this site. The monohydrate is an intermediate with less water, and the anhydrous salt is the fully dried form. All three can be ≥99.0% pure and still be different materials, because the water of crystallisation is part of the formula rather than a contaminant. That is why a magnesium figure without a hydrate name is ambiguous. A certificate showing about 20% magnesium is not a stronger heptahydrate; it is the anhydrous salt's content. A buyer who compares quotations on the magnesium percentage alone can end up comparing three different hydrates, or an anhydrous lot against a heptahydrate specification. The second axis is particle form. The catalog offers a 40 mesh powder and crystals on request. Crystal size does not change the chemistry, but it changes dust, flow, dissolution rate and how the material behaves in a blend. ## The three hydrates side by side Composition of the magnesium sulfate grades | Property | Heptahydrate | Monohydrate | Anhydrous | Formula | MgSO4·7H2O | MgSO4·H2O | MgSO4 | Molecular weight | 246.47 | 138.38 | 120.37 | Magnesium | 9.86% | 17.56% | 20.19% | Water of crystallisation | 51.2% | 13.0% | None | Appearance | Colourless crystals or white powder | White powder | White powder | Water solubility | Freely soluble | Freely soluble | Freely soluble, with heat of hydration | Typical role | Standard supplement grade | Higher magnesium per gram | Low-water applications The table is a composition table, not a ranking. The heptahydrate is not the weakest grade because it carries the most water; it is the grade with the longest commercial record and the one for which the catalog ranges on this page are written. The anhydrous salt is not automatically the better purchase: it is more reactive with moisture and needs a specification written for it. ## Crystals, powder and the 40 mesh line The heptahydrate is available as crystals or as a white powder. Crystals are easier to see and handle, produce less dust and dissolve more slowly; a 40 mesh powder blends more evenly into a stick mix or a capsule fill and dissolves faster. Neither form is more “natural” than the other. The choice belongs to the dosage form and the process, not to the label story. Particle size also affects caking. A fine powder has more surface area and picks up or loses water at the surface faster than a coarse crystal. The heptahydrate is efflorescent, so a warm, dry store can change the water figure at the surface even while the centre of the particle is unchanged. A granulated or milled version is a separate specification with its own bulk density and flow. The catalog format is a 40 mesh powder, with crystals on request. If a process needs a different mesh, a granulation or a denser powder, that should be written into the specification before the quotation, because the change moves the particle-size line and may move the lead time. ## The magnesium figure and the fill weight The label declares elemental magnesium; the ingredient list names magnesium sulfate. The bridge between them is the hydrate. At 9.86% magnesium, 100 mg of elemental magnesium needs 1.01 g of the heptahydrate; 200 mg needs 2.03 g; 300 mg needs 3.04 g. The same 100 mg from the anhydrous salt needs about 0.50 g, and from the monohydrate about 0.57 g. Those differences decide the dosage form. A 700 mg capsule fill of the heptahydrate carries about 69 mg of magnesium; a 1 g stick pack carries about 99 mg; a 2 g stick carries about 197 mg. A formula that needs 200 mg of magnesium per serving cannot fit into a single small capsule of the heptahydrate, and the answer is a larger fill, a second capsule or a different salt — not a magnesium figure borrowed from an anhydrous certificate. Taste and mouthfeel follow the mass as well. The heptahydrate is bitter and saline, and a 2 g stick is a noticeable amount of powder in a drink. The formulator trials the matrix at the real magnesium dose, not at a rounded spoonful. The label arithmetic, the fill weight and the sensory trial should use the same hydrate number. ## What to write into the specification - “Magnesium sulfate heptahydrate, CAS 10034-99-8, MgSO4·7H2O.” - “Assay ≥99.0% on the heptahydrate basis; magnesium 9.5–10.0%; water 48.0–52.0% by Karl Fischer.” - “Identification by IR and titration; sulfate reaction conforms to the reference.” - “Appearance colourless crystals or white powder; 40 mesh powder or crystals as agreed.” - “Heavy metals and microbiology as listed; chloride limit where the source or the market requires one.” - “Hydrate state, particle form, pack and lot code stated on the certificate and the label.” - “No substitution of the monohydrate or the anhydrous salt without a written change control.” ## When not to switch grade Do not move to the anhydrous salt only to shrink a capsule. The change alters the water content, the hygroscopicity, the dissolution behaviour and the label arithmetic, and it needs a new specification, a new stability check and a label review. The same applies in reverse: a monohydrate lot is not a heptahydrate with less water, and accepting it against a heptahydrate specification leaves the certificate and the purchase order describing different materials. The heptahydrate is the right grade when the formula, the label and the pack were built around it, which is the usual case for capsules, sticks and drink mixes. The anhydrous grade is the right choice only when a low-water powder is genuinely needed and the specification, the stability data and the pack are written for it. A technical grade is not a food grade whatever its assay, and it should not enter a supplement file. The product hub carries the catalog specification. The sulfate versus chloride comparison covers the other salt decision, the COA page shows where the hydrate is declared, and the stability page covers what the water does in storage. ### 02.1 Magnesium sulfate vs magnesium chloride: the anion, the solubility and the pack URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-sulfate/grades/magnesium-sulfate-vs-chloride/ Reviewed: 2026-11-19 Magnesium sulfate and magnesium chloride deliver different amounts of magnesium per gram, behave in opposite ways in a pack and put a different anion on the label. The sulfate is the heptahydrate, about 9.9% magnesium and efflorescent; the chloride is the hexahydrate, about 12.0% magnesium and deliquescent. For the same magnesium dose, the sulfate needs about 1.01 g per 100 mg against about 0.84 g for the chloride, so the choice changes the fill weight and the pack before it changes the assay. In one lineThe anion sets the magnesium per gram, the way the powder behaves in a pack and the name on the label; the two salts are not interchangeable at the same dose. ## The anion is not a spectator Both materials are magnesium salts, and both are sold as hydrates. The sulfate carries a divalent SO42− ion; the chloride carries two monovalent Cl− ions for every magnesium. That difference changes the formula weight, the mass of salt needed for a given magnesium dose, the taste, the osmotic load and the analytical test that proves the salt. It also changes the ingredient name on the label, which is a regulatory fact rather than a marketing choice. The two hydrates have separate CAS numbers: magnesium sulfate heptahydrate, 10034-99-8, and magnesium chloride hexahydrate, 7791-18-6. A 12% magnesium figure on a certificate does not mean a stronger sulfate; it means the chloride or a blend. The hydrate and the anion have to be named together before any comparison is meaningful. ## Magnesium per gram and the fill Magnesium sulfate heptahydrate against magnesium chloride hexahydrate | Property | Sulfate heptahydrate | Chloride hexahydrate | Formula | MgSO4·7H2O | MgCl2·6H2O | CAS number | 10034-99-8 | 7791-18-6 | Molecular weight | 246.47 | 203.30 | Magnesium | 9.86% (catalog 9.5–10.0%) | 11.95% (catalog 11.5–12.5%) | Water of crystallisation | 51.2% (catalog 48.0–52.0%) | 53.2% (catalog 45.0–55.0%) | Salt for 100 mg magnesium | 1.01 g | 0.84 g | Salt for 200 mg magnesium | 2.03 g | 1.67 g The arithmetic uses the theoretical magnesium content, not a batch result; the catalog ranges are wider and a real lot sits inside them. At 200 mg of magnesium, the sulfate needs about 0.36 g more salt than the chloride. That is enough to move a single-capsule dose into two capsules, or to turn a 1.7 g stick into a 2 g stick. The hydrate matters as much as the anion. Anhydrous magnesium sulfate is 20.2% magnesium, and anhydrous magnesium chloride is 25.5%; comparing either anhydrous figure with the heptahydrate on the label would overstate the magnesium by a factor of two. The specification, the certificate and the label should all name the hydrate. ## Solubility, solution and taste Both salts are freely soluble in water, and at supplement-drink concentrations neither is limited by solubility. The sulfate heptahydrate dissolves at about 71 g per 100 mL at 20 °C; the chloride is the more soluble of the two and is deliquescent, so it can pull water from the air before it reaches the mixer. The practical difference is not whether the salt dissolves, but what the solution does afterwards. The sulfate solution is close to neutral. The chloride solution is not identical in pH or taste, and the chloride puts three ions into solution per magnesium against two for the sulfate. At the same magnesium dose, that means a different osmotic load and a different mouthfeel. The sulfate reads as bitter and saline; the chloride reads as salty and bitter. Neither is neutral in a drink, and the formulator trials both at the real dose rather than at a rounded spoonful. Calcium is the other solution question. A sulfate in a calcium-containing matrix can precipitate calcium sulfate, which shows up as haze, sediment or a loss of calcium in the finished product. The chloride does not remove calcium in the same way. If the formula carries calcium, the sulfate is the salt that needs the compatibility trial first. ## Two packs, two failure modes Both products are offered in a 1 kg foil pouch and a 25 kg fiber drum, so the pack list looks the same. The failure modes are opposite. Magnesium sulfate heptahydrate is efflorescent: warm, dry air pulls water out of the crystal, the water result falls below 48.0% and the magnesium percentage rises. Magnesium chloride hexahydrate is deliquescent: humid air is absorbed, the powder becomes damp and can cake or liquefy. A pack that protects one does not automatically protect the other in the same way. The foil pouch is a barrier against both directions, which is why it is the standard pack for each. The difference appears after opening and in the drum liner. An open sulfate liner in a dry, warm store can lose water; an open chloride liner in a humid store can take water in. The in-use instruction, the liner and the storage condition should match the salt, not be copied from the other product. Chloride also changes the equipment duty. A wet chloride solution is the harder environment for stainless-steel contact and can pit some grades; the sulfate solution is milder. That is a reason to check the wetted parts and the cleaning regime when switching, not a reason to accept a different salt without a specification change. ## What the formula does with the difference A capsule or tablet is a fill-weight problem. The sulfate needs more grams for the same magnesium, so the capsule count or the tablet weight rises. A stick pack is a mass and taste problem: a 2 g sulfate stick carries about 197 mg of magnesium, while 2 g of the chloride would carry about 239 mg. A drink is a taste, osmotic and compatibility problem: the chloride adds more ions and more chloride, while the sulfate can take calcium out of the matrix. The label follows the salt. The ingredient list names magnesium sulfate or magnesium chloride, and the nutrition declaration states elemental magnesium. A formula switched from one salt to the other without recalculating the magnesium and rewriting the ingredient name is mislabelled even if the assay is correct. ## When to choose which Choose the sulfate when the product is a capsule, stick or drink that was formulated around the heptahydrate, when the pack can be kept sealed and dry, and when the calcium compatibility has been checked. Choose the chloride when the fill weight is the constraint, when the higher magnesium per gram justifies a new specification, and when the pack and the equipment can handle a deliquescent, chloride-bearing powder. The choice is a change control, not a purchase-order substitution. Do not switch on the magnesium percentage alone. A 12% figure is not an upgrade if it changes the hydrate, the anion, the label, the taste and the pack. Rebuild the specification, the stability data and the label before the first order, and keep the two salts as separate line items. The magnesium sulfate hub carries the heptahydrate specification; the magnesium chloride page carries the hexahydrate; the magnesium citrate page shows a third anion for comparison; the grade page covers the hydrate choice; the methods section covers the assays; the quality page covers the release file. ### 03 Magnesium sulfate is stable sealed; dry air and heat move the hydrate URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-sulfate/stability/ Reviewed: 2026-11-19 A sealed pack is the normal condition for magnesium sulfate heptahydrate, and under that condition the salt is chemically dull: it does not oxidise, hydrolyse or fade in light. What changes is the water. The crystal gives water up in warm, dry air, takes it on at high humidity, and dissolves into a solution that can support microbes and crystallise on cooling. In one lineThe heptahydrate fails by water movement rather than by chemical decay: dry heat drives the crystal drier, humidity wets and cakes it, and a solution adds microbial and crystallisation risk. ## The powder: water leaves before anything else changes The 48.0–52.0% water range is not a moisture allowance. It is the water of crystallisation, and it is the line that moves first in storage. Magnesium sulfate heptahydrate is efflorescent, so warm, dry air pulls water out of the lattice. The powder can still titrate above 99.0% while the water result sits below 48.0%, because the titration counts magnesium and the water counts the crystal. A buyer who reads a low water figure as “drier and better” has read the specification backwards. Temperature matters because warm air holds more water. A hot loading bay, a sun-facing container or a heated loft will dry the surface faster than a cool store. The effect is not uniform: the outside of a drum can lose water while the centre stays inside the range, so a top sample may not represent the lot. The pack limits the exchange, and an open liner removes that limit. Humidity is the other direction. The heptahydrate does not pull water from the air as aggressively as the chloride, but a damp store can still wet the liner and cake the surface. The caked layer is a handling problem, not a purity result. Close the liner after sampling, stand the drum on a pallet and write the opening date on the label. ## The solution: microbes, crystals and calcium The salt dissolves readily, roughly 71 g of heptahydrate per 100 mL of water at 20 °C, and the solution is close to neutral. That makes it chemically easy to work with and microbiologically easy to spoil. An unpreserved neutral solution is a growth medium; a preservative or another hurdle, a validated hold time and a release micro result belong in the liquid specification. Cooling is the physical risk. A concentrated solution held in a cold room or pumped through a cold line can deposit heptahydrate crystals, which changes the concentration in the tank and can block a nozzle or a filter. The formulation should state the concentration, the temperature window and the hold time, and the process should check the solution before filling. Calcium is the compatibility risk. Sulfate and calcium form calcium sulfate, which is sparingly soluble, so a drink with both can develop haze, sediment or a lower free calcium result. Strontium and lead behave in the same direction. If the matrix contains one, the sulfate needs a compatibility trial. ## What moves the material Storage and matrix factors for magnesium sulfate heptahydrate | Factor | Effect | Control | Warm, dry air | Efflorescence; water drops below 48.0% | Sealed pouch or lined drum; cool store | Damp air | Wet liner; surface caking | Dry store; closed liner; desiccant if needed | Heat | Faster water loss; faster growth in solution | Shade and temperature control | Microbes | Spoilage of an unpreserved solution | Preservative or hurdle; validated hold | Calcium and strontium | Insoluble sulfate precipitate | Check the mineral premix and the water | Evaporation and cooling | Crystals in a stored solution | Covered tank; temperature window The factors reinforce one another. A warm, dry store removes water; a warm, damp store wets the surface and encourages growth in any condensate; a cold store can crystallise a solution. The useful question is not whether the salt is stable in general, but what it does in a named pack under a named condition for a named period. ## A protocol that tests the right failure A storage study should fix the pack, the climate, the sampling times and the test panel before it starts. A common design uses 25 °C/60% relative humidity for the warehouse, 30 °C/65% for a warmer market and 40 °C/75% as the accelerated arm. For this salt, add a dry arm at about 25 °C/30% relative humidity to catch efflorescence, and a solution arm in the real matrix if a liquid is intended. The dry arm is the one that catches water loss; the humid arm catches caking; the solution arm catches growth. Test water by Karl Fischer, magnesium by complexometric titration, appearance, pH of a standard solution and microbiology at each point. For a liquid, add the preservative system and test at the start and end of the hold. Report the individual results, not only a pass statement. Seal the subsample before the water test, because a sample left open in a dry room can lose water and describe a drier lot than the pack. Use the pack that will be sold: a 1 kg pouch and a 25 kg drum differ in headspace, liner area and opening history, and a result from one is not a result for the other. ## The formula decides the rest In a capsule or tablet, the shell and the excipients can pass water to or from the fill. Check the water figure at release and after storage, and inspect the fill for caking or shrinkage. A wet granulation is a special case: if sulfate meets a soluble calcium salt in the granulation liquid, calcium sulfate can precipitate before the tablet is even dried. In a stick pack, the seal is the shelf life. A pinhole or a weak seam lets humid air in and lets the powder cake, and the strip should be inspected as well as the powder. In a drink, the sulfate meets the water source, the pH, the preservative and the other minerals; the bulk result is only the starting point, and the drink's shelf life must be measured in the drink. Taste belongs in the trial. The heptahydrate is bitter and saline, and a 2 g stick carries about 197 mg of magnesium. A formulator who tastes the powder at the real dose learns more than one who tastes a diluted spoonful. ## How the retest period is set There is no universal shelf-life number for the molecule. The retest period belongs to the pack, the storage condition and the test panel, and it should be supported by data for the pack that will be shipped. A figure borrowed from another pouch, another drum or another hydrate is not evidence for this pack. Water is the first indicator to watch. A lot that stays inside 48.0–52.0% and keeps its magnesium and assay results over the study is behaving as expected. A lot whose water drifts below the floor has changed hydrate even if the assay still passes. At the end of the retest period, test the retained sample again before extending use; do not extend by assumption. The product hub shows the catalog packs; the COA page lists the release tests; the ordering page covers pack and lead time; the grade page explains the hydrate choice; the quality page shows how the lot record is kept. ### 04 Magnesium sulfate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-sulfate/moq/ Reviewed: 2026-11-19 Magnesium sulfate heptahydrate ships from a 1 kg foil pouch, and the production pack is a 25 kg fiber drum. Standard 40 mesh powder leaves in 1–7 days; crystals are quoted as a separate line. A quotation is only comparable when it names the hydrate, the water range, the mesh and the destination. In one lineThe 1 kg pouch exists for trials and retained samples; the 25 kg drum is the production pack, and the heptahydrate's water content makes pack integrity part of the order. ## Why the minimum is one pouch The minimum is one pouch, not one kilogram of magnesium. A 1 kg pack carries about 99 g of elemental magnesium, which is enough for a bench trial, a retained sample and an independent check of the water, magnesium and sulfate identity. It is also the smallest unit with its own lot code and certificate. A smaller quantity is normally a split from a larger lot, and the split loses the direct link between the sample and the drum. The drum is the production unit: 25 kg, or about 2.47 kg of magnesium. It is not a trial size, and it commits storage space and a storage period. The heptahydrate is more than half water by mass, so the freight and the warehouse footprint per kilogram of magnesium are larger than for a concentrated salt. Ordering the drum before the hydrate and the mesh are fixed is a commitment to a specification that may still change. The MOQ is therefore a released-lot decision. It is the smallest quantity that can be sampled, tested and traced as one lot, not a volume target or a commercial incentive. ## Packs and formats Magnesium sulfate packs and what each one needs | Pack | Net weight | Use | What to watch | Foil pouch | 1 kg | Trial, retained sample, small batch | Reseal; lot code on the pouch | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Powder, 40 mesh | 1 kg or 25 kg | Capsules, sticks, blends | Standard catalog format | Crystals | On request | Handling and dissolution | Separate particle specification | Granulated | On request | Flow and dust control | Bulk density and mesh change The foil and the drum liner are moisture barriers, and the seal and the liner closure are the weak points. The heptahydrate is efflorescent: a pack that exchanges air with a dry, warm store can lose water and fail the 48.0% floor. A pouch that has been opened and folded over is not a sealed pack, and the drum liner should be closed after every sample. Crystal form, mesh and granulation are specification lines, not packing choices. A coarser crystal dissolves more slowly and makes less dust; a finer powder blends more evenly and dissolves faster. If the process needs a different mesh, say so before the quotation, because the change moves the particle-size line and the lead time. ## Lead time and dispatch Standard powder is quoted at 1–7 days from order confirmation. That covers picking, paperwork and dispatch; it does not cover the sea or air transit, customs clearance or the customer's own quality release. A custom crystal size, a granulation or a non-standard pack adds time and should be quoted as a separate item. Ask for a dispatch date, not only a lead time. A drum may travel on a pallet and a pouch as a parcel; the Incoterm decides who books the freight and who clears the entry. The certificate, the packing list and the lot label should travel with the material. If the certificate follows later, the warehouse is holding a drum it cannot release. ## What a quotation needs A comparable quotation carries six fields: - Hydrate and CAS. Magnesium sulfate heptahydrate, CAS 10034-99-8. “Epsom salt” is a common name, not a specification. - Specification. Assay, magnesium, water by Karl Fischer, identification, mesh, heavy metals and microbiology. - Quantity and pack. 1 kg pouch, 25 kg drum, crystals or a granulated variant. - Destination and Incoterm. Country, port or address, and the trade term. - Documents. COA, TDS, SDS, allergen, GMO, origin and processing-aid statements. - Use and market. Supplement, food or another use, and where the finished product will be sold. A quote that says “magnesium sulfate” and gives a magnesium percentage but no hydrate or water range is not comparable with a heptahydrate quote. The water range is what separates the heptahydrate from the monohydrate and the anhydrous salt. Commercial terms are stated in the quotation, not on this page. ## The sample is a lot The pouch is a lot sample, not a demonstration. Test water first, because it is the result most affected by sample handling: seal the subsample, run Karl Fischer and compare it with 48.0–52.0%. Then test magnesium, sulfate identity, chloride where relevant and microbiology. Keep a retained sample from the same pouch, and make the lot code on the sample, the certificate and the quotation agree. A bench trial that needs less than a kilogram should be discussed before ordering. A split from a bulk lot is a repack with its own traceability, and it may not come from the same lot as the production drum. Label it as a repack, and do not read its certificate as the drum's certificate. ## Terms to settle before the first order The commercial terms are in the quotation: the Incoterm, the pack, the lead time and the documents. The quality terms sit beside them: the specification revision, the COA per lot, the retained sample, the retest period and the change-control route for the hydrate, the mesh and the pack. A written quality agreement before the first production order is easier than a dispute after it. Returns and replacements follow the quotation and the quality agreement. A lot that misses the agreed specification should be handled on the retained sample with a joint re-test, not on a photograph. Agree which laboratory is acceptable to both sides and who commissions the referee test. The product hub carries the catalog specification; the COA page lists the release tests; the grade page explains the hydrate choice; the stability page covers water in storage; the quality page describes the release and retained-sample record. ### 05 The regulatory file for magnesium sulfate URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-sulfate/compliance/ Reviewed: 2026-11-19 Magnesium sulfate heptahydrate sits at the intersection of two regulatory routes: a magnesium source for food supplements and a food additive with its own identity. The file has to name the exact hydrate, the destination and the finished-product dose, and the buyer's regulatory team confirms which route covers the product. This page lists the documents and checks that belong in that file, so the specification and the commercial pack can be reviewed together. In one lineThe specification describes the heptahydrate; the regulatory file shows the route, the limits and the label for the destination. ## What the file contains A complete file answers four practical questions. What is the material, and which specification version is being bought? Which lot is being released, and what does its certificate report? Which route, limits and label rules apply in the destination? And what changes if the source, the process or the pack changes? The technical data sheet answers the specification question, the certificate answers the lot question, and the safety data sheet answers the handling question. None of them answers the route question on its own. The file should also carry the allergen and GMO statements, the origin record, the processing-aid statement and any customer-specific declaration. For an inorganic salt the list is shorter, but the hydrate, the particle form and the pack are still part of what is placed on the market. Where a statement is missing, name the gap before the order rather than discovering it at the port. Each document should carry a date and a revision, and the specification, quotation and certificate should refer to the same version; undated PDFs are not a controlled file. ## European Union The EU file is built from the specification, the contaminant results and the label. Magnesium sulfate has an additive identity, E518, and the mineral-source route for food supplements is a separate framework; the two are not interchangeable, and neither is a conclusion for a particular finished product. The buyer's regulatory team confirms which entry covers the exact hydrate, the use level and the destination member state, using the current consolidated text as of this review. General food law, labelling and contaminant rules apply alongside the product-specific route. The label should name the salt in the form the destination requires, and the nutrition declaration should state elemental magnesium rather than the heptahydrate mass. The word “magnesium sulfate” can describe the heptahydrate or a dried salt, so the hydrate should be written into the specification and the label. Check the current text before relying on any summary, including this page. The EU lists and the labelling rules can change, and a file built on an old summary is a file that has not been checked. ## United States The US file is built around the dietary-ingredient basis the supplier relies on and the intended use in the finished supplement. The buyer confirms that the basis covers the product, the dose and the label. A conventional-food use and a supplement use are different files even when the material is the same; the route, the labelling and the claim review change with the category. The Supplement Facts panel names the dietary ingredient and declares elemental magnesium. “Magnesium sulfate” alone may be ambiguous if the hydrate is not named, and a panel built on the anhydrous salt cannot be filled with the heptahydrate without recalculating the magnesium. The certificate supports the lot; it does not establish the regulatory route. The US file also needs the facility and supplier information the buyer's quality team requires, the allergen and GMO statements, and the heavy-metal and microbiology results for the lot. The buyer's regulatory reviewer confirms the label and the claim separately from the certificate. ## Contaminants and limits The contaminant panel is a finished-product calculation, not only a drum result. The table below is a usual starting point for a food-supplement file; the current destination text and the daily dose decide the final limit. Contaminant limits to confirm for the finished product | Parameter | Typical supplement reference | What the file should show | Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method, limit and the finished-product calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception that applies | Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result and method | Arsenic (As) | Customer or market limit | The agreed limit and the method, stated on the certificate The water limit is a specification line, not a contaminant. The heptahydrate is supposed to carry 48.0–52.0% water; a “moisture” result below that range is a hydrate change, while a result above it can mean free water or a wet liner. The certificate should call the test water by Karl Fischer and report it against the hydrate range. The finished-product arithmetic is worth doing before the first order. At a 2 g stick, a lead result of 3.0 mg/kg in the ingredient contributes about 6 µg of lead per serving, before any other ingredient is counted. The file should show that calculation against the limit for the supplement as consumed, not only the drum result. ## Label and claims The label names the material, the elemental magnesium quantity and the source in the form the destination requires. In the EU, a magnesium claim from the permitted list is available only when the finished product meets the conditions for a significant amount, and the claim is about magnesium, not about the sulfate. The claim review is separate from the specification and from the certificate. In the US, a structure/function statement carries the required disclaimer; in the EU, the claim must be on the permitted list and meet its conditions. No therapeutic, curative or preventative claim belongs on the page or the label. Do not use the product page as a label or a claim. The finished product's status is a separate legal question, and the buyer's regulatory reviewer signs it off for the destination. ## Documents in the file - Specification with the hydrate, the assay, the magnesium and water ranges, the particle form and the pack. - Batch COA with the methods, the release limits and the measured results. - Technical data sheet and safety data sheet. - Allergen, GMO, origin and processing-aid statements. - Heavy-metal and microbiology results, with the method and the detection limit. - Packaging declaration and the lot code that links the pack to the certificate. - The destination route, the label review and the claim review, held by the buyer's team. ## Checklist before the first order - Is the exact hydrate, its CAS number and the particle form named in the specification? - Do the assay, magnesium and water results describe the same lot and the same basis? - Is the destination route confirmed by the buyer's regulatory team, as of this review? - Do the contaminant results fit the finished-product limit at the real dose? - Does the label name the salt and declare elemental magnesium correctly? - Are the source, process, particle form and pack under change control? The product hub carries the catalog specification; the COA page explains the lot certificate; the identity page covers the sulfate and water evidence; the EU regulatory note gives the framework references; the quality page describes the release file. ### 06 How we prove a magnesium sulfate lot is the heptahydrate URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-sulfate/identity/ Reviewed: 2026-11-19 A magnesium sulfate lot is the heptahydrate when four lines agree: the document names the hydrate and CAS 10034-99-8, the magnesium titration gives about 9.9%, the sulfate reaction or ion chromatography confirms the anion, and the Karl Fischer water is 48.0–52.0%. The magnesium figure alone cannot separate the sulfate from the chloride, the citrate or the oxide. The anion and the water are what make this salt the one on the specification. In one lineMagnesium alone cannot prove the salt: the sulfate figure, the 1:1 ratio and the water of crystallisation have to agree on the same lot. ## The four identity layers A certificate can name the right material and still fail to prove it. The four layers below are separate questions, and each needs its own evidence. A supplier who answers only the first has described the paperwork, not the powder. Four layers of magnesium sulfate heptahydrate identity | Layer | Question | Test | What it proves | Document | Is the hydrate named? | Name, CAS number, formula | Paperwork only | Magnesium | Is the metal present? | Complexometric titration | The magnesium, not the salt | Sulfate | Is the anion sulfate? | Barium chloride reaction or ion chromatography | The sulfate | Water | Is it the heptahydrate? | Karl Fischer and XRD | The hydrate The magnesium titration is quantitative and useful, but it is blind to the anion. The sulfate reaction is qualitative and quick: acidify the solution and add barium chloride; a white precipitate that does not dissolve in dilute acid is barium sulfate. Ion chromatography gives the sulfate figure as a number, which is what a ratio check needs. The water result is the hydrate's fingerprint. ## The 1:1 ratio and the mass balance The formula has one magnesium ion for every sulfate ion. On a mass basis that is 9.86% magnesium, 38.97% sulfate and 51.16% water, which sums to 100%. The numbers are fixed by the formula, so a certificate that reports magnesium and sulfate on the same lot can be checked against the ratio rather than read as two unrelated results. Theoretical composition of magnesium sulfate heptahydrate | Component | Theoretical share | Catalog line | What a deviation suggests | Magnesium | 9.86% | 9.5–10.0% | A lower hydrate, a blend or a different salt | Sulfate | 38.97% | Identity; assay where agreed | A chloride, oxide or sodium-sulfate substitution | Water | 51.16% | 48.0–52.0% | Efflorescence, over-drying or free moisture The sulfate-to-magnesium mass ratio is about 3.95. If the magnesium is low and the sulfate is high, sodium sulfate is a likely diluent, because it adds sulfate without magnesium. If the magnesium is high and the sulfate is low, magnesium oxide or magnesium chloride is the more likely contaminant. A blend can hold the magnesium figure inside the range while the anion changes, which is why the anion result belongs on the same lot. The water closes the balance. A result of 51.0% water with 9.8% magnesium and 39.0% sulfate describes the heptahydrate. A result of 47.0% water with the same magnesium does not, even if the assay still reads above 99.0%. ## X-ray diffraction: the hydrate phase X-ray diffraction answers a different question from titration: is the solid the crystalline heptahydrate, and does its pattern match a reference? It can distinguish the heptahydrate from the hexahydrate, the monohydrate and the anhydrous salt, and it can show a sodium sulfate phase that a magnesium assay would miss. It is not a purity assay and it does not measure the counter-ion. Ask for the reference pattern and the detection limit before reading a “match” statement. A certificate that says only “XRD conforms” without the pattern or the reference has added little. XRD is most useful when the water result sits at an edge, when a supplier claims a hydrate that the water figure does not support, or when two sources are being compared. For a disputed lot, XRD plus sulfate plus magnesium plus water is stronger than any one of them. The combination shows the phase, the anion and the metal on the same sample, which is what an identity file is for. ## What substitution looks like Substitutions and deviations in magnesium sulfate | Substitution | What it does | Signal | Test | Magnesium chloride | Raises magnesium per gram; adds chloride | Chloride high; sulfate low; powder damp | Chloride by ion chromatography; XRD | Sodium sulfate | Adds sulfate without magnesium | Sodium high; magnesium low | Sodium by ICP-OES; magnesium titration | Magnesium oxide | Raises magnesium; lowers sulfate | Insoluble residue; sulfate low | Acid solubility; sulfate assay | Magnesium carbonate | Raises magnesium; lowers sulfate | Effervescence with acid | Acid reaction; XRD | Lower hydrate | Raises magnesium; lowers water | Water below 48.0%; magnesium high | Karl Fischer; XRD Appearance is the weakest signal. Colourless crystals and white powder cover a wide range, and a different magnesium salt can look the same. The stronger signals are the chloride and sodium figures, the sulfate result, the water and the XRD phase. A certificate that reports appearance and magnesium but not the anion has left the most likely substitution untested. ## How to write identity into the specification - “Magnesium sulfate heptahydrate, CAS 10034-99-8, MgSO4·7H2O.” - “Assay ≥99.0% on the heptahydrate basis; magnesium 9.5–10.0%; water 48.0–52.0% by Karl Fischer.” - “Identification by IR and titration; sulfate reaction conforms; sulfate by ion chromatography where a figure is agreed.” - “Chloride and sodium limits stated on the certificate where the source or the market requires them.” - “XRD reference pattern available where the hydrate phase is disputed.” - “No magnesium chloride, sodium sulfate, magnesium oxide or lower hydrate above the stated limit.” - “Lot code and retained sample linked to the certificate.” ## Five questions for the supplier - Which hydrate is this lot, and which CAS number is on the certificate? - What are the magnesium and sulfate results on the same lot, and by which methods? - What is the water result, and was the sample sealed before the Karl Fischer test? - Is there an XRD pattern, and which reference pattern does it match? - What are the chloride and sodium results, and are they inside the agreed limits? Five direct answers make an identity file; a single magnesium percentage does not. The product hub carries the catalog specification; the COA page shows where each figure sits on the certificate; the grade page compares the hydrates; the XRD method note explains the phase check; the quality page describes the retained sample. ### 01 What the COA for zinc lactate actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-lactate/coa/ Reviewed: 2026-11-19 For a zinc lactate lot the certificate reports appearance, identification by infrared and titration, assay and elemental zinc by titration, water by Karl Fischer, heavy metals, microbiology and particle size. Every row needs its method, its limit and this lot's result; the ranges below are catalogue limits, not a lot result. The hydrate belongs in the product name and the water figure belongs beside the zinc figure, because zinc lactate trihydrate is defined by both. In one lineThe zinc figure and the water figure have to agree: a 21.0–23.0% zinc result describes zinc lactate trihydrate only when the 17.0–19.0% water and the lactate identity are read beside it. ## The certificate as a set of auditable lines A reader should be able to audit any row without a second document: what was tested, how, against which limit, and what the lot returned. “Conforms” alone is a verdict without a number. The identity row settles the anion; the zinc and water rows settle how much trihydrate the powder contains. Identity, assay and physical tests · zinc lactate trihydrate | Parameter | Method | Release limit | Appearance | Visual | White crystalline powder | Identification | Infrared spectrum and titration | Conforms to reference | Assay | Complexometric titration | 98.0–102.0%; basis stated on the certificate | Zinc (Zn) | Complexometric titration | 21.0–23.0% | Water | Karl Fischer | 17.0–19.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh ## Assay basis, water of crystallisation and the zinc figure Zinc lactate trihydrate is 18.16% water and 21.97% zinc by formula. The catalogue pairs water at 17.0–19.0% with zinc at 21.0–23.0%, so a lot that meets both is consistent with the trihydrate. A lot whose water falls below 17.0% while zinc rises above 23.0% has lost lattice water; it is a different solid, even if the assay still reads inside its range. The assay needs its basis in the same row. Calculated on the dried basis as anhydrous zinc lactate, 99.0% with 18.0% water gives 99.0% × (1 − 0.18) × 26.85% = 21.8% zinc as weighed. Calculated on the trihydrate as-is, 99.0% gives 99.0% × 21.97% = 21.75% zinc. Both land inside the catalogue range, but the arithmetic differs; a certificate without the basis leaves the reader guessing. In the usual complexometric method the assay is calculated from the same EDTA titration as the zinc line. The two numbers are not independent evidence: they rise and fall together. The infrared spectrum and the lactate identity are the separate evidence for the anion; the water result is the separate evidence for the hydrate. Karl Fischer measures total water, not only surface moisture. That is why 17.0–19.0% is a hydrate specification rather than a drying allowance: a lot at the bottom of the range has little room for water picked up after opening, and a lot at the top may already be carrying it. The measured figure belongs on the certificate. ## The limit, the result and the gap A limit is a gate, while a result is a measurement, and the two need separate columns with the method adjacent. If the result column simply repeats the range, no measurement has been reported, and a “passes specification” line gives nothing to trend. Reading the result column | Parameter | Release limit | Result column | Assay | 98.0–102.0%, basis named | A measured percentage with the basis and the titration method | Zinc | 21.0–23.0% | A measured percentage on the powder as weighed | Water | 17.0–19.0% | A measured percentage by Karl Fischer | Heavy metals | Per element | A measured figure in mg/kg for each element, with the quantification limit | Microbiology | Counts and absence | The count and the absence statement for the lot | Particle size | ≥95% through 40 mesh | The measured percentage through the sieve “Conforms” is a conclusion, not a measurement. The heavy-metal evidence is a figure per element, not a total; a summed result hides the element that matters. Microbiology needs a count and an absence statement, with the method named. A “not detected” line without a detection limit says something about the method, not the powder. ## What moves between batches Crystallisation and drying move water and zinc together. A drier lot loses surface moisture first and lattice water later; as water falls, zinc rises because the same metal sits in less mass. A wetter lot moves the other way: zinc falls, water rises, and the powder can cake. Both are visible on the certificate before the drum. The assay and zinc line come from the same titration, so they cannot check each other. Lactate identity should not move: an infrared spectrum that no longer matches the reference is a different signal from a small zinc shift. Particle size moves with milling and sieving, not chemistry, so a change in the 40 mesh result does not imply a change in the salt. Appearance and flow resist quantification, yet they often flag a change before a number does. A grey or yellow cast, or a sudden loss of flow, should send the reader to the drying record and the metal panel: the assay can still be in range. Several lots in sequence tell more than one result at the edge. Pouch, drum and retained sample should share a lot code. ## When to order an outside test An outside laboratory earns its place for a new source, a regulated-market first shipment, a form claim the certificate cannot carry, or a disputed result. Build the panel around the open question: EDTA for zinc, HPLC or infrared for lactate, Karl Fischer for water, ICP-MS for the metals, a microbiology set, and X-ray diffraction if crystalline zinc oxide is suspected. Every trace and phase method should come with its detection or quantification limit. The material tested needs to be the retained sample, with a lot code matching the certificate and the pack. In a dispute, hand the referee that sample, the specification and the certificate, then request the tests that distinguish forms rather than a repeat titration. ## What to compare between suppliers A fair comparison reads across six lines: the hydrate and CAS number, the assay with its basis, zinc and water, the identity method and its reference, the contaminant and microbiology panel, and the mesh and pack. Quotations that match on zinc but part company on basis or water are offers for different powders. Traceability is the second layer. The document should identify the manufacturing site, the lot and the release date, and the same lot code should be printed on pouch, drum and retained sample. The catalogue specification sits on the zinc lactate product page; the tests that prove the anion are on the identity page; the hydrate and mesh options are on the grades page; the titration is described in the methods library; the release file is explained on the quality page. ### 02 Zinc lactate trihydrate, anhydrous or milled: choosing a grade URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-lactate/grades/ Reviewed: 2026-11-19 Zinc lactate is sold as the trihydrate, with 17.0–19.0% water and 21.0–23.0% zinc, and that is the catalogue grade. An anhydrous salt, a milled powder and a granulated powder are separate specifications: they change the zinc per gram, the flow, the dust and the fill weight. The grade decision starts with the dosage form and the label, not with the assay. In one lineThe hydrate and the mesh are specification decisions: the trihydrate, the anhydrous salt and a milled or granulated powder carry different zinc per gram and behave differently in the line. ## Why the hydrate comes first Zinc lactate trihydrate has the formula C6H10O6Zn·3H2O and a formula weight of about 297.6. Three water molecules are 18.16% of that mass, and the zinc is 21.97%. The anhydrous salt has a formula weight of about 243.5 and carries 26.85% zinc, so a gram of the anhydrous material supplies about 22% more zinc than a gram of the trihydrate. That difference moves the fill weight and the label arithmetic before any other property is considered. The trihydrate is the catalogue form because the specification describes a stable, free-flowing solid. The anhydrous salt is a separate material: its own water limit, its own flow behaviour, and a stronger pull toward atmospheric moisture. It is not a drop-in, and a formula qualified on the trihydrate cannot move to it at the same mass without recalculating zinc and rechecking the blend. ## The grade options side by side Zinc lactate forms and particle profiles · what changes in the pack | Form | Zinc figure | Water | Behaviour | Fits | Trihydrate, 40 mesh (catalogue) | 21.0–23.0% | 17.0–19.0% | Soluble; free-flowing crystalline powder | Capsules, tablets, sticks, blends | Trihydrate, milled to 80 or 100 mesh | Unchanged from 40 mesh | Unchanged from 40 mesh | Finer, more dust, faster dissolution | Capsules, suspensions, gummies | Trihydrate, granulated | Unchanged from 40 mesh | Unchanged from 40 mesh | Coarser, better flow, less dust | Tablets, sachets, high-speed lines | Anhydrous | About 26.9% theoretical | Own limit; lower than the trihydrate | Different solid; picks up water | Dry systems where the water is unwanted Rows one to three are the same salt at three particle profiles. Milling or granulation shifts the distribution, the flow and the dust; neither touches the zinc or the water. A mesh change cannot explain a zinc result on a certificate. The anhydrous row is a different chemical specification, with its own label name and water limit. ## Solubility, taste and handling Zinc lactate dissolves in water and gives a slightly acidic solution. That places it between zinc citrate, which is only slightly soluble and forms a suspension, and zinc gluconate, which dissolves freely and gives a solution close to neutral. The difference matters in a clear drink or a stick pack: the lactate can disappear at a useful zinc concentration where the citrate would leave a dispersion, while the gluconate has the widest solubility margin. The zinc citrate and zinc gluconate pages carry those comparisons. The taste belongs to the zinc, not the lactate: a metallic or astringent note grows with concentration, and the acidic anion can read as faintly tart in a low-sugar recipe. The 40 mesh powder is white, crystalline and free-flowing. A finer mill dissolves more quickly but throws more dust; a granulated grade flows more evenly but may bring a binder that must appear on the label. Trial the grade at the real zinc concentration, in the real matrix, before the artwork is fixed. ## What the dosage form can carry Fill weight comes from dividing the declared elemental zinc by the salt's zinc fraction. At 22.0% zinc, 10 mg of zinc takes about 45 mg of trihydrate; 15 mg takes about 68 mg, 25 mg about 114 mg, and 50 mg about 227 mg. These are planning figures. The lot certificate supplies the assay and zinc result for the final calculation. Trihydrate mass for a zinc label claim · planning figures at 22.0% zinc | Elemental zinc | Zinc lactate trihydrate | What it means in the line | 10 mg | About 45 mg | Small capsule or a low-dose stick | 15 mg | About 68 mg | Typical capsule fill with room for excipients | 25 mg | About 114 mg | Tablet or a larger capsule | 50 mg | About 227 mg | A large capsule or a divided stick pack A capsule or tablet takes the mass easily, so the citrate's extra zinc per gram is not needed to make the dose fit. A stick pack or drink mix is where solubility earns the lactate its place, with the taste trial deciding whether the acid note suits the flavour. In a gummy, water activity and pH outweigh the mesh, and the lactate's acidity has to be balanced in the recipe. ## How to write the specification - “Zinc lactate trihydrate, CAS 16039-53-5, C6H10O6Zn·3H2O.” - “Assay 98.0–102.0% by complexometric titration; basis named on the certificate.” - “Zinc 21.0–23.0%; water 17.0–19.0% by Karl Fischer.” - “Identification by infrared and titration; lactate identity by HPLC where the anion is disputed.” - “Sieve: ≥95% through 40 mesh; contaminants and microbiology per the panel.” - “Hydrate, mesh and any granulation named before the order.” A custom mesh or a granulated grade is a different specification and may add lead time. The hydrate line is not optional: “zinc lactate” alone describes a family, and the trihydrate and the anhydrous salt are different powders with different labels. The product hub carries the catalogue line; the COA page shows how the zinc and water are reported; the stability page covers the pack; the methods library describes the titration; the quality page explains the release file. ### 02.1 Zinc lactate vs zinc citrate: solubility, zinc and taste URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-lactate/grades/zinc-lactate-vs-citrate/ Reviewed: 2026-11-19 Zinc lactate trihydrate and zinc citrate dihydrate supply the same element from different salts. The lactate is specified at 21.0–23.0% zinc and dissolves in water; the citrate is specified at 31.0–32.5% zinc on the dried basis and dissolves only sparingly. A 15 mg zinc claim needs about 68 mg of the lactate or about 47 mg of the citrate, and the two behave differently in a drink and on the tongue. In one lineZinc lactate is the more soluble salt with less zinc per gram; zinc citrate carries more zinc and less water, so the choice turns on the fill, the drink and the taste trial. ## The zinc figure and the mass arithmetic Zinc lactate trihydrate has a formula weight of about 297.6 and is 21.97% zinc by formula; the catalogue range is 21.0–23.0% on the powder as weighed. On the citrate side the formula weight is about 610.3 and the theoretical zinc figure is 32.1%; the catalogue allows 31.0–32.5% zinc, calculated on the dried material. The citrate carries roughly ten percentage points more zinc per gram, a property of the anion rather than the assay. The conversion is a division. Divide the elemental zinc the label declares by the zinc fraction of the salt. At 22.0% for the lactate and 32.0% for the citrate, 10 mg of zinc needs about 45 mg or about 31 mg; 15 mg needs about 68 mg or about 47 mg; 25 mg needs about 114 mg or about 78 mg; 50 mg needs about 227 mg or about 156 mg. The ratio stays near 1.45, so the lactate always needs about half again the mass of the citrate for the same claim. ## Solubility and what it does to the format Zinc lactate dissolves in water and gives a slightly acidic solution. It can carry a useful zinc dose in a clear drink or a concentrate, provided pH and preservative are set for the matrix. Zinc citrate dissolves only sparingly: a 5% preparation is a particle dispersion rather than a solution, and the particles settle. The citrate is still usable in a liquid, but as a suspension that must be shaken and stabilised. Zinc gluconate sits at the other end: it dissolves freely and gives a solution close to neutral. If the brief is a clear drink with the widest solubility margin, the gluconate is the easier starting point; if the brief is a capsule or a tablet, solubility is a minor property and the citrate's higher zinc per gram becomes the useful one. The zinc gluconate page carries that comparison. Solubility is not stability. A lactate solution is a water-based system that needs a preservative and a validated hold time; a citrate suspension needs physical stability, so the particles do not settle into a hard cake. The powder's certificate does not answer either question. The stability page sets out the pack and matrix work. ## Taste is a matrix result Both salts taste of zinc: a metallic or astringent note grows as concentration rises. The anion changes how that note arrives. An acidic lactate solution can read as faintly tart in a low-sugar drink; citrate brings a tart note and a chalky texture in suspension; gluconate is often described as mild because it dissolves cleanly at near-neutral pH. These are starting points, not specifications. Sweetener, acidulant, flavour and serving temperature decide what the consumer tastes. A panel on the powder, or on a solution at a different zinc concentration, will not predict the finished product. Trial the salt at the real dose in the real matrix, with the real sweetener and acid, and judge the aftertaste as well as the first impression. Taste is not a health claim, and neither belongs on the certificate. ## What the dosage form can carry Powder mass for a zinc claim · lactate at 22.0%, citrate at 32.0% | Elemental zinc | Zinc lactate trihydrate | Zinc citrate dihydrate | Mass ratio | 10 mg | About 45 mg | About 31 mg | About 1.45 | 15 mg | About 68 mg | About 47 mg | About 1.45 | 25 mg | About 114 mg | About 78 mg | About 1.45 | 50 mg | About 227 mg | About 156 mg | About 1.45 In a capsule or a tablet the citrate's density of zinc is an advantage when the fill is tight. The lactate still fits a 50 mg claim in a large capsule, but it uses about 70 mg more powder for the same dose, and that space has to come from the excipients. In a stick pack the order reverses: the lactate dissolves and the citrate disperses, so the format decides which salt is practical before the mass does. For a gummy or chew, pH and water activity carry more weight than the zinc percentage. The lactate's acidity can help a fruit flavour and fight a neutral one. In a powder blend, particle size and bulk density determine whether either salt segregates; the catalogue 40 mesh is the starting point for both. ## What the label has to say The ingredient list names the salt and the hydrate, not just the element. “Zinc lactate” and “zinc citrate” are different ingredients, and “zinc lactate trihydrate” is the precise name. The nutrition declaration states elemental zinc in milligrams and as a share of the reference value: 10 mg in the EU and the UK, 11 mg in the US. That share is worked out on the element, never on the salt mass. Changing salt produces a new ingredient list and a new fill weight even when the elemental zinc per serving is unchanged. It also demands a new specification, a fresh certificate review and a stability check in the matrix. Fix the salt before the label is written; a formula built on one salt cannot be relabelled as the other without change control. ## When to choose which - Choose zinc lactate when the format is a clear drink or a stick pack and the solution can be protected. - Choose zinc citrate when capsule or tablet fill is tight and a slight suspension is acceptable. - Choose zinc gluconate when the widest solubility margin and a near-neutral solution matter most. - Do not choose on a taste description alone; trial the salt at the real dose in the real matrix. - Manage a salt switch as change control: new specification, fill, stability data and label. The zinc lactate product page carries the catalogue line; the zinc citrate page gives the comparison figures; the zinc gluconate page covers the freely soluble option; the methods library describes the titration behind the zinc figures; the quality page explains the release file. ### 03 Zinc lactate stability: the hydrate, moisture and the pack URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-lactate/stability/ Reviewed: 2026-11-19 Zinc lactate trihydrate keeps well in a sealed pack; the failures that matter are about water, not decomposition. The 17.0–19.0% water is part of the crystal, so a dry room and a closed liner protect the hydrate, while heat, humidity and an open pouch move the water figure and the flow. A solution is a different and shorter-lived format. In one lineThe trihydrate is stable while it stays sealed; moisture pickup, heat and an open liner change the water figure and the flow before they change the assay. ## The powder, the lattice water and the liner The water in zinc lactate trihydrate is not surface moisture. Three molecules sit in the crystal, 18.16% of the formula weight, and Karl Fischer measures them along with anything picked up later. The specification allows 17.0–19.0%, so the target is a narrow band: drying a lot to 16% does not make it better, it makes it a partly dehydrated solid with more zinc per gram and a different dissolution behaviour. A lot above 19% is carrying water beyond the hydrate, and caking is the first visible sign. The pack is the barrier. The 1 kg foil pouch and the 25 kg fiber drum with a food-grade liner are the standard formats, and the liner has to be closed after every draw. An open liner in a humid room lets the powder take up water; the water figure climbs, the powder cakes, and the flow that the capsule line was set for changes. The assay may stay inside its range through all of this, which is why the water result is the earlier warning. Heat speeds the exchange. A normal warehouse suits a sealed pack; a hot loading bay, a sunlit vehicle or a room beside a dryer does not. A cold drum should reach room temperature before it is opened, so condensation does not settle on the powder. Light matters less for this white solid, but an opaque or foil pack remains the default because it also slows moisture transfer. ## The solution is the shorter format Zinc lactate dissolves in water to give a slightly acidic solution. In a clear drink or a concentrate, the zinc is in solution and the matrix, the pH and the preservative system now control the shelf life. The powder's stability data does not transfer to the drink: a heat step, a different pH and a larger water activity all change the rate at which the product changes. An alkaline matrix is the practical risk. Zinc can form a hydroxide and the drink can haze or deposit sediment as the pH rises. An acidic matrix keeps the zinc in solution but can make the lactate note sharper and can interact with colours and flavours. The formulator should fix the pH band, trial the real acidulants and check the appearance after the heat load, not only at mixing. Microbial growth is the other reason a solution is shorter-lived than a powder. Water is present, and zinc at a nutritional concentration is not a preservative. A preservative system, a validated hold time and a clean fill are part of the formulation. If the project is a stick pack, the consumer adds the water at the point of use, and the powder keeps the powder's shelf life. ## What moves the result Storage and matrix factors · zinc lactate | Factor | What changes | Control | Water pickup | Water rises above 19%, powder cakes, flow falls | Close the liner; dry store; desiccant where needed | Over-drying | Water falls below 17%, zinc rises, hydrate changes | Do not dry to a lower figure than the specification | Heat | Faster moisture exchange; caking in the pack | Ambient store; cool process; equilibrate after cold storage | Alkaline pH | Zinc hydroxide haze or sediment in a liquid | Set and buffer the pH band; trial the matrix | Microbial load | Growth in an aqueous formula | Preservative, hold time and clean fill | Pack | Moisture or odour transfer | Foil pouch; sealed drum liner; closed after each draw These factors compound. A warm, damp store with an open liner is worse than either condition alone, and a warm alkaline drink stacks pH and heat in one matrix. Rather than ask whether the salt is stable, ask how long it lasts in a named pack under a named condition. ## A stability protocol for the ingredient A bulk study uses the commercial pack at 25 °C and 60% relative humidity, adds an intermediate arm at 30 °C and 65% relative humidity, and stresses a third arm at 40 °C and 75% relative humidity. Pull samples at months 0, 2, 6, 12 and 24 for appearance, assay, zinc, Karl Fischer water, lactate identity, microbiology, and particle size or flow. The dosage form needs a study of its own. Capsules and tablets go into a blister or an HDPE pack with desiccant, and are checked for water, appearance, zinc and disintegration or dissolution. A stick pack is tested inside its laminate, seal included. A drink is tested in its bottle at the real pH, preservative level and heat load. No bulk result substitutes for these. ## The formula and the pack decide the rest Capsules and tablets run at low water activity, yet the shell and the excipients can still pass moisture to the fill. Measure water at release and after storage, and watch the appearance and flow. A hygroscopic excipient beside the salt can draw water toward it; a lubricant or binder that brings water is a formulation change, not a processing detail. A stick pack lives or dies by its laminate and seal; one pinhole is a failure, so inspect the strip as well as the powder. A gummy is shaped by sugar system, water activity and pH; the lactate's acidity must also be balanced against the flavour. In any format, an overage is a label and stability decision, never a repair for a pack that admits water. ## How the shelf life is assigned No single shelf-life figure is published for zinc lactate: the pack and the storage condition determine it. The retest period appears on the specification and rests on the stability file for that exact pack. A figure with no pack, no condition and no test panel is a claim rather than a shelf life. Once the retest period expires, re-assay the retained sample before extending use. Never extend on assumption, and never carry a bulk figure over to a repacked pouch or a different drum liner. The product hub lists the standard packs, the COA page covers release tests, the MOQ page covers pack and lead time, the methods library describes the water and titration methods, and the quality page explains the release record. ### 04 Zinc lactate: MOQ, packing and lead time URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-lactate/moq/ Reviewed: 2026-11-19 Zinc lactate is ordered from 1 kg: a foil pouch taken from a released lot, carrying that lot's certificate. Production moves to the 25 kg fiber drum. The 1–7 day dispatch clock starts when the specification and the order are confirmed, and a firm quotation needs the hydrate, the quantity and pack, the destination and the documents. In one lineThe 1 kg pouch is the smallest unit we can release and trace as a lot; the 25 kg drum is the production pack. ## Why the minimum is 1 kg A single kilogram is enough for formulation trials, a short stability pilot and a first production run. The pouch comes from a released lot, so the trial material and the certificate are a matched pair. The figure is not a volume threshold. It is the smallest unit that can carry a lot label, a sample record and a certificate. Anything smaller is normally taken from a larger lot and repacked. That adds handling, discards the original pack identity and leaves a retained sample that no longer matches the pouch. The chemistry is unchanged; the traceability is not, and traceability is what a quality team audits. At 25 kg the fiber drum is the bulk pack: less handling per kilogram, but more inventory and a longer storage period. Name the hydrate in the first message. This catalogue line is zinc lactate trihydrate, CAS 16039-53-5, 21.0–23.0% zinc and 17.0–19.0% water. The anhydrous salt carries more zinc per gram and has its own water limit, so a trial on the wrong hydrate certifies nothing. ## The standard packs Standard zinc lactate packs | Format | Fill | Where it fits | What to watch | Foil pouch | 1 kg | Trial, sample and small batch | Moisture barrier; close it after opening; lot label on the pouch | Fiber drum | 25 kg | Production | Food-grade liner; lot code on both drum and liner | Milled powder | On request | Finer mesh for capsules or suspensions | Particle size and dust both change | Granulated grade | On request | Flow and dust management | Binder declaration; altered flow The liner is part of the pack specification. Once it is open, the drum is no longer the pack that was studied, and the certificate cannot show the difference. In a humid destination, request a desiccant and write it into the packing specification. Every pack should carry the product and hydrate, the lot code, the net weight, the certificate reference and the storage condition. ## How the 1–7 days is counted Dispatch is quoted at 1–7 days from confirmation of the specification and the order. The count begins only when hydrate, quantity, pack and documents are fixed; a question against a draft specification is not an order. That window covers picking, paperwork and handover to the carrier. Transit, customs and the customer's quality release sit outside it. Four things extend the window: a finer mill, granulation, an outside test, and destination paperwork such as an origin certificate or a translated label. Name them in the first message so the quotation can show the extra days. Ask for a dispatch date rather than a lead time alone. A drum usually moves on a pallet and a pouch as a parcel; the Incoterm fixes who books the freight and clears the entry. ## Six details for a quotation - Product and hydrate. Zinc lactate trihydrate, CAS 16039-53-5, spelled out in full. - Specification. The assay and its basis, zinc, water, mesh, contaminants and microbiology. - Volume and format. The 1 kg pouch, the 25 kg drum, or a milled or granulated grade. - Destination and Incoterm. Where it is going and on which trade term. - Documents. The certificate, technical data sheet, safety data sheet and any importer statement. - Intended use and market. What it will be used for, and where it will be sold. A quote that omits the hydrate or the market cannot be compared. One destination may accept a powder that another destination's file does not cover, so the paperwork is part of the offer. Commercial terms follow the confirmed order and are not listed here. ## A sample has to carry a lot The 1 kg pouch is the qualification sample. Before scaling, test identity, assay, zinc, water and microbiology, and retain a portion from the same pouch. Sample, certificate and quotation should share a lot code. Without that link, a sample is a demonstration rather than a qualification. A smaller bench quantity can be discussed before the order. Material split out of a bulk lot is repacked, with its own traceability; it is not the catalogue pouch and should be recorded that way. Never assume the bench sample and the production drum share a lot. A sample offered for a milled or granulated grade has to be that grade; the 40 mesh powder will not qualify it. ## Terms to settle first The quotation states the commercial terms, the Incoterm and pack, the lead time and the document list. The quality terms sit alongside: specification revision, certificate per lot, retained sample, retest period and change control. Settle the quality agreement before production starts, not after a dispute. Returns and replacements are governed by the quotation and the quality agreement. If a lot fails the agreed specification, resolve it on the retained sample with a joint re-test, not with a photograph. Agree who pays for the referee test and which laboratory both sides accept. The product hub holds the catalogue line; the COA page lists the release tests, the compliance page covers the market paperwork, the methods library explains the titration and water methods; the quality page describes the lot record and the retained sample. ### 05 The regulatory file for zinc lactate URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-lactate/compliance/ Reviewed: 2026-11-19 Zinc lactate is a zinc salt supplied as the trihydrate, and the regulatory file is built around that exact hydrate, the destination and the finished-product route. The buyer's regulatory team confirms whether the destination places the salt in the nutrient-source route, the food-additive route or another category. What follows is the framework, the limits and the documents that the file should hold, so the specification and the pack can be checked against one record. In one lineThe certificate describes one lot, the specification describes the material, and the destination route and label are confirmed separately by the buyer's regulatory team. ## The four questions the file has to answer A complete file establishes four things: what the material is and which version of the specification is being purchased; which lot the certificate speaks for; which route, limits and label rules the destination applies; and how a change of source, process or pack is controlled. Each document has a narrow job. The certificate speaks for the lot, the technical data sheet for the specification, and the safety data sheet for handling. None of them decides the route. For a mineral salt the food-additive route and the food-supplement route are different gates. One may regulate the salt as a technical additive with purity criteria; the other may regulate it as a nutrient source with a source list. The same drum can be in scope for one and out of scope for the other, so the file should name the route before it argues about the specification. The supplier can provide the material data; the buyer's regulatory team makes the route decision for the destination. ## European Union The EU file starts with general food law, Regulation (EC) No 178/2002, and the labelling rules in Regulation (EU) No 1169/2011. Contaminants fall under Commission Regulation (EU) 2023/915 as of this review. For a food supplement, Directive 2002/46/EC sets the framework and its Annex II lists the vitamin and mineral sources that may be used; for a food additive, Regulation (EC) No 1333/2008 and its specifications apply instead. The buyer's team confirms which route covers the product and whether the salt is named in the current text. Directive 2002/46/EC also prescribes what the supplement label must show: the term “food supplement”; the nutrient and its amount per serving; the percentage of the nutrient reference value; a warning not to exceed the daily dose; a warning to keep the product away from children; and a statement that it does not replace a varied diet. Notification and maximum-level rules can vary by Member State. Check the consolidated text and the national rules before signing the artwork. ## United States In the United States the route to check is the dietary-supplement one. The seller must be able to name the basis that makes the zinc salt a lawful dietary ingredient and hold the evidence for it; the buyer checks that the basis reaches the finished product and the claim. Certificate and specification support that file, but neither creates the basis. 21 CFR 101.36 governs the Supplement Facts panel, which declares elemental zinc per serving against the Daily Value. Current good manufacturing practice under 21 CFR 111 includes identity testing. A structure/function statement must be truthful and substantiated, and must carry the DSHEA disclaimer in 21 CFR 101.93. Disease-related claims are not permitted. Review label and claim separately from the certificate. ## Contaminants and limits On the raw material the catalogue sets Pb ≤3 mg/kg, Cd ≤1, Hg ≤0.1 and As ≤2. Those are not finished-product limits. To convert a lot result, multiply by the salt's fraction of the serving and compare the answer with the destination ceiling. A capsule usually leaves headroom; a stick that is largely zinc lactate leaves very little. Contaminant ceilings for food supplements at this review | Element | EU | US federal | UK | Lead (Pb) | 3.0 mg/kg in the supplement | No federal supplement limit; state rules apply | 3.0 mg/kg retained limit | Cadmium (Cd) | 1.0 mg/kg | No federal supplement limit | 1.0 mg/kg retained limit | Mercury (Hg) | 0.10 mg/kg | No federal supplement limit | 0.10 mg/kg retained limit | Arsenic (As) | No harmonised EU limit | No federal supplement limit | No harmonised GB limit The table is a starting point, not a substitute for the current text. Where the destination has no harmonised arsenic limit, the buyer sets one in the specification and asks for the method and the quantification limit. Check the current regulation and the finished dose before fixing the raw-material ceiling. ## Label and claims The label names the ingredient and reports elemental zinc, not the mass of the salt. The EU and UK reference value is 10 mg, and a source claim needs 15% of it in the daily portion, or 1.5 mg of elemental zinc; the US Daily Value is 11 mg. Authorised wording and its conditions live in the claim file, and the brand's reviewer signs off that the wording fits the product, the form and the market. This page reproduces no claim wording and makes no health claim for zinc lactate; it publishes specification, method and regulatory facts. A certificate is not a claim approval, and a claim cannot alter the specification. Saying that zinc lactate is used in capsules describes the material, not a benefit. ## The document pack - Lot certificate with method, release limit and result for assay, zinc, water, identity, heavy metals, microbiology and particle size. - Specification and technical data sheet naming zinc lactate trihydrate, the CAS number and the assay basis. - Safety data sheet, allergen statement, GMO statement, origin record and residual-solvent statement. - Contaminant report against the destination limits, with the laboratory's quantification limits. - Artwork that declares elemental zinc per portion with the % NRV or % Daily Value. - The US dietary-ingredient basis, where the destination is the United States. - Change-control record for the source, the process, the pack and the specification revision. ## Before the first order - Does the specification name the trihydrate, the CAS number and the assay basis? - Has the buyer's team confirmed the route and the permitted-source position for the destination? - At the real dose, do the contaminant results stay below the finished-product limit? - Does the label report elemental zinc and the correct percentage of the reference value? - Is each claim authorised for this market, worded exactly, with its supporting file? - Are the COA, TDS, SDS and market documents on file, current and matched to the lot? The product hub holds the catalogue line; the COA page maps each figure onto the certificate; the identity page sets out the tests that establish the salt; the methods library sets out the analytical methods; the quality page explains the release file. ### 06 How to prove a zinc lactate lot is the lactate URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-lactate/identity/ Reviewed: 2026-11-19 Four independent lines make a zinc lactate lot: the paperwork names the trihydrate and the CAS number, infrared and HPLC establish the lactate anion, EDTA titration returns 21.0–23.0% zinc, and Karl Fischer returns 17.0–19.0% water. Zinc alone cannot separate the lactate from zinc sulfate, whose heptahydrate carries a very similar zinc percentage. The anion and the water finish the identification. In one lineThe zinc figure, the lactate peak, the 17.0–19.0% water and the 1:2 zinc-to-lactate ratio are separate checks, and a lot is the lactate only when they agree. ## The four identity layers Each layer answers a different question, and one result can close one layer while leaving the others open. The table sets out what each test proves and what it does not. A supplier who answers only the zinc figure has described a quantity, not a material. Four checks on a zinc lactate lot | Check | What it settles | Method | What the result covers | Paperwork | Hydrate and identity | Name, CAS number, formula | The label on the lot, nothing more | Metal | Zinc content | Complexometric EDTA titration | The element, not the anion | Anion | Lactate present | Infrared spectrum and HPLC | The salt, not the hydrate | Water and ratio | Trihydrate and stoichiometry | Karl Fischer and mole calculation | The hydrate, not the purity alone The paperwork layer is needed because the trihydrate and the anhydrous salt differ in formula weight and zinc figure. The metal layer is EDTA titration, which measures total zinc in the dissolved portion and says nothing about the anion. The anion layer pairs an infrared spectrum, matched against a reference in the carboxylate and hydroxyl regions, with an HPLC separation of lactate from other organic acids. The water layer is Karl Fischer, read together with the mole ratio. ## The 1:2 ratio and the water Zinc lactate is Zn(C3H5O3)2·3H2O. In a formula weight of about 297.6, zinc accounts for 21.97%, the two lactate anions for 59.87% and the three waters for 18.16%. Charge balance fixes the mole ratio at one zinc to two lactate: zinc is divalent and lactate is monovalent. Any other ratio implies a second ion or a different anion. When a certificate reports lactate quantitatively, convert zinc and lactate to moles and look for the 1:2 ratio. That assay is not part of the routine release panel; it belongs to a disputed lot or a new source. Excess lactate against zinc suggests added lactic acid or a diluted salt, while excess zinc against lactate suggests a second zinc source. Compare both on the same basis. The water figure is the simplest discriminator. Zinc sulfate heptahydrate carries 22.74% zinc, close enough to the lactate's 21.97% that a zinc assay alone cannot tell them apart, but it carries about 43.9% water against the lactate's 18.16%. A Karl Fischer result near 18% with 22% zinc is consistent with the lactate; a result near 44% is not. A sulfate limit test adds a direct check on the anion. ## XRD and the solid-state question X-ray diffraction maps crystalline phases. Here it can flag crystalline zinc oxide, match the hydrate pattern to a reference, and show whether two lots are the same solid. It is neither a purity assay nor a measure of anion or water. A report claiming “XRD conforms” without the pattern, the reference and the detection limit adds little. Reach for diffraction when the question is solid form, not potency: a suspected oxide addition, a trihydrate-to-anhydrous switch, or a new source claiming the same specification. It is not a routine release test here. Before accepting a “no crystalline zinc oxide detected” line, ask for the sample preparation and the detection limit. ## What substitution looks like Zinc lactate substitutions and the signals | Substitution | What moves | Signal | Test | Zinc oxide | Zinc rises, water falls, powder less soluble | Zinc above 23%; low water | Karl Fischer, XRD, solubility | Zinc sulfate | Zinc stays near 22%; water rises to about 44% | High water; sulfate present | Karl Fischer, sulfate test | Zinc gluconate | Zinc falls toward 14%; lactate signal weakens | Low zinc; no lactate peak | HPLC, infrared | Anhydrous sold as trihydrate | Water falls below 17%; zinc rises | Water and zinc outside the pair | Karl Fischer; hydrate declaration | Lactose or carrier | Zinc and assay fall together | Low zinc; foreign infrared bands | Mass balance, infrared Zinc oxide is the blunt route: at about 80% zinc, a small addition lifts the zinc figure and pulls the water down while the powder stays white. Zinc sulfate is subtler because its zinc figure is so close; the water result and a sulfate test are what expose it. Zinc gluconate pulls the zinc figure down, and a lactose carrier dilutes zinc and assay together. ## Writing identity into the specification - “Zinc lactate trihydrate, CAS 16039-53-5, C6H10O6Zn·3H2O; hydrate named on the certificate.” - “Assay 98.0–102.0% by complexometric titration; basis stated on the certificate.” - “Zinc 21.0–23.0%; water 17.0–19.0% by Karl Fischer.” - “Identification by infrared and titration; lactate identity by HPLC where the anion is disputed.” - “No added zinc oxide, zinc sulfate, zinc gluconate, lactic acid or undeclared carrier.” - “Sieve: ≥95% through 40 mesh; contaminants and microbiology per the panel.” The prohibitions matter as much as the numbers. A zinc range by itself cannot rule out a second zinc source, and a supplier cannot be bound by a restriction the specification never writes down. ## Questions to put to a supplier - What hydrate is this lot, and what CAS number appears on its certificate? - Which zinc and water results belong to the lot, and were both measured on one sample? - May we see the infrared spectrum and, where the anion is disputed, the HPLC chromatogram? - Does the lot contain one salt, or a blend with oxide, sulfate, gluconate or a carrier? - If identity is disputed, will you join a re-test on the retained sample? Five direct answers amount to an identity file; a lone zinc percentage does not. The product hub holds the catalogue line; the COA page maps each figure onto the certificate; the grades page compares the hydrate and mesh options; the methods library sets out the titration and chromatography; the quality page explains the retained sample. ### 01 What the COA for zinc malate actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-malate/coa/ Reviewed: 2026-11-19 For a zinc malate lot, the certificate reports appearance, identification by infrared and HPLC, assay by HPLC, zinc by complexometric titration, loss on drying, the heavy-metal panel, microbiology and particle size. The ranges below are the catalog specification; the batch COA is the document that confirms a named pack. Two numbers matter most and they answer different questions: the assay says how much zinc malate is present, and the zinc figure says how much of the element the powder delivers. In one lineA zinc malate certificate carries two numbers — the salt assay and the elemental zinc — and the ratio between them shows whether the two results describe the same powder. ## The certificate as a test report A certificate is only auditable if every line names the parameter, the method and the limit the lot was released against. A row that reads “conforms” without the test behind it asks the reader to accept a conclusion. The table below is the catalog release panel for zinc malate, not a result for any particular lot. Release panel · zinc malate, catalog specification | Parameter | Method | Release limit | Appearance | Visual | White to off-white, free-flowing powder | Identification | Infrared spectrum and HPLC retention | Conforms to the reference | Assay, as zinc malate | HPLC | 98.0–102.0% | Zinc (Zn) | Complexometric titration | 32.0–34.0% | Loss on drying | Gravimetric | ≤2.0% | Heavy metals | ICP-MS, element panel | Lead ≤3 · arsenic ≤2 · cadmium ≤1 · mercury ≤0.1 mg/kg | Microbiology | Plate count and absence tests | Aerobic count ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli, Salmonella: absent | Particle size | Sieve analysis, 40 mesh | ≥95% passing ## The assay, the zinc figure and the basis The HPLC line and the titration line measure different things. The assay is a chromatographic result expressed as zinc malate; the zinc line is a titration of the element, usually with disodium edetate at about pH 10 and an indicator such as Eriochrome Black T. The titration counts zinc from every source in the portion that dissolves. It does not know whether that zinc arrived as malate, citrate or oxide. That is why the two results have to be read together. Pure zinc malate, C4H4O5Zn, has a formula weight of about 197.45 and carries 33.1% zinc by mass. A lot at 99.0% assay should therefore report about 32.8% zinc. A zinc figure well above that ratio points to a second, denser zinc source such as oxide; a figure below it points to dilution or to a salt with a lower zinc fraction. The basis must be stated, not assumed. A dried-basis figure has the measured water taken out of the calculation, while an as-is figure still contains it. With a drying limit of ≤2.0% the gap between the two is small, but it is not zero, and it is largest in the lots that were handled least carefully. The certificate should write “as-is” or “dried basis” in the assay and zinc rows themselves, not in a footnote. ## The limit, the result and the gap between them A release limit is the boundary the specification sets; a batch result is the measurement the laboratory returned. The certificate needs both, in separate columns and next to the method, so the reader can see how far the lot sat from the edge. What the result column should show | Parameter | Release limit | Result column | Assay | 98.0–102.0% | Measured percentage, with the basis | Zinc | 32.0–34.0% | Measured percentage and titration method | Loss on drying | ≤2.0% | Measured percentage | Heavy metals | Per element | A mg/kg figure for each element | Microbiology | Counts and absence | The count plus the absence statement Not every line is a range. Identification is a pass or fail against a reference, and the absence tests are pass or fail against the method. The metal panel works differently: each element has its own ceiling, and a single “heavy metals” total hides the one that matters. Ask for the limit of quantification beside any “less than” result; without it the number describes the method, not the powder. ## What moves between batches The reaction, the crystallisation and the drying step move the assay, the zinc figure and the loss on drying. Milling and sieving move the particle-size result without changing the chemistry, so a change from 40 mesh to a finer cut should not be offered as an explanation for an assay shift. Colour is the least quantitative line: white to off-white covers a range, and a cream or grey tint is a reason to look at the drying record and the metal panel, not to reject on sight. A trend across lots is more informative than one result near an edge. Zinc drifting high with the assay steady suggests a second zinc source; zinc drifting low with the drying result climbing suggests moisture; both numbers falling together suggests a carrier. One lot code should appear on the certificate, the pouch, the drum and the retained sample, so a trend can be attached to a pack rather than to a supplier in general. ## When to order an outside test An outside laboratory earns its cost in four situations: a new source that has not been qualified, a first entry into a regulated market, a salt claim the supplier's paperwork cannot support, and a result that is disputed. Do not repeat the whole certificate; choose the tests that answer the open question. Infrared and HPLC settle the malate, EDTA titration settles zinc, Karl Fischer or loss on drying settles water, ICP-MS covers the elements and a plate count covers the hygiene. If crystalline zinc oxide is suspected, add diffraction, because titration cannot distinguish the sources. Chain of custody decides whether the test settles anything. The sample tested should be the retained sample, and the report should name the lot. When two laboratories disagree, give the referee the retained sample, the specification and both reports, and ask for the test that separates the forms rather than a second run of the same assay. ## How two suppliers compare Put six lines side by side: the salt name and CAS number 2847-05-4; the assay result and its basis; the zinc result and the titration method; the loss on drying; the contaminant and microbiological panel; and the pack size with its lot code. Two quotations that agree on the zinc percentage but differ on the assay, the moisture or the basis are not describing the same powder. Traceability is the next layer. The certificate should name the manufacturing site, the release date and the specification version it was released against. The catalog line sits on the zinc malate product page. The tests that separate the salt from a blend are on the identity page; the titration is described in the complexometric method note; the release workflow is on the quality page. The zinc citrate page shows the parallel panel for the other salt. ### 02 Zinc malate grades: mesh, moisture and the zinc figure URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-malate/grades/ Reviewed: 2026-11-19 Zinc malate is one salt, so a grade is not a second chemistry. What changes between commercial offers is the particle size, whether the powder is granulated, the moisture limit the supplier will release against, and how the assay and zinc figures are declared. The choice between zinc malate and another zinc salt is a separate decision, made on zinc per gram, solubility and the name the label can use. In one lineFor zinc malate, grade means particle size, granulation, moisture and a stated zinc figure; the salt name stays the same. ## Why a single salt still has grades A capsule does not fill itself with a certificate. The powder has to flow into the dosator, the tablet press has to compress it without sticking, and the blend has to stay uniform while it is conveyed. Those are physical properties, and they are set by milling, sieving and granulation rather than by the reaction that made the salt. A 40 mesh powder and a granulated powder can carry the same assay and behave differently on the line. There is also a commercial grade question: what the supplier will guarantee on the certificate. A standard line releases at 98.0–102.0% assay, 32.0–34.0% zinc and ≤2.0% loss on drying. A tighter moisture limit can be agreed for a hygroscopic matrix or a long hold, but it is a specification change, not a packing choice, and it should be quoted as one. ## The grade options side by side Zinc malate grades · what changes in the drum | Grade | What changes | Typical use | Watch | Standard powder, 40 mesh | ≥95% through 40 mesh; free-flowing | Capsules, tablets, blends | Fines can dust and segregate | Fine powder, finer cut | Higher surface area; slower flow | Chews, suspensions, small sachets | Dust, caking, blend loss | Granulated | Larger particles; better flow, less dust | Tablets, stick packs, high-speed filling | Granulation aids must be declared | Tighter moisture limit | Lower loss on drying at release | Humid plant, long hold, effervescent mix | Agreed limit, not a standard pack These rows are process variants, not different salts. A granulated zinc malate still assays as zinc malate and still carries about 33% zinc; what moves is the particle-size distribution, the bulk density and the flow. A certificate that explains a zinc result by pointing to the mesh has confused a physical change with a chemical one. The salt choice is a different table. Zinc malate is specified at 32.0–34.0% zinc; zinc citrate at 31.0–32.5%; zinc gluconate at about 14.3% on the anhydrous formula; zinc oxide at 78.0–80.0%. The first two are close enough that the fill difference is small, the gluconate needs roughly twice the mass, and the oxide is the most concentrated but practically insoluble. Zinc salts · the figures that decide the fill | Salt | Zinc figure | Water solubility | Fits | Zinc malate | 32.0–34.0% | Slightly soluble; more soluble in acid | Capsules, tablets, acidic blends | Zinc citrate | 31.0–32.5% on the dried basis | Slightly soluble; buffered suspension | Capsules, tablets, sticks | Zinc gluconate | About 14.3% theoretical | Freely soluble | Clear drinks, syrups | Zinc oxide | 78.0–80.0% | Practically insoluble | Tablets where mass is tight ## Particle size, flow and the room The 40 mesh figure means at least 95% of the powder passes a 40 mesh sieve, which is about 420 micrometres. That is a coarse-ish powder: it flows better than a fine flour but still throws dust when it is poured. A finer cut increases the surface area and the dust, improves the mouthfeel in a chew, and makes segregation in a low-dose blend more likely. Granulation is the usual answer when the line needs flow and the formula can declare the binder. Moisture changes the physics before it changes the chemistry. A powder that has picked up surface water cakes in the hopper, bridges in the feed frame and weighs unevenly. The ≤2.0% loss-on-drying limit is a release gate; a plant in a humid climate should ask for the in-use handling instruction as well as the release result, because the number on the certificate describes the pack, not the hopper. ## What the dosage form can carry The fill arithmetic is simple at 33.0% zinc: a 10 mg zinc claim needs about 30.3 mg of zinc malate, a 25 mg claim about 75.8 mg and a 50 mg claim about 151.5 mg. In a capsule those masses are comfortable, and the salt leaves room for the excipients. In a small tablet or a two-piece capsule at the top of its size range, the same 50 mg claim starts to compete with the disintegrant and the lubricant, and the granulated grade may pack better than the standard powder even though the mass is unchanged. In a stick pack or a powder blend, the grade decides whether the salt stays mixed. A fine powder can settle away from a coarse sugar or an organic acid; a granulated grade with a similar particle size to the other ingredients is easier to keep uniform. In a chew or a gummy, the taste of the salt and the water activity matter more than the mesh, and a matrix trial is the only reliable test. ## How to write the grade into the specification - “Zinc malate, CAS 2847-05-4, C4H4O5Zn; salt name written out.” - “Assay 98.0–102.0% by HPLC; zinc 32.0–34.0% by complexometric titration; basis stated.” - “Loss on drying ≤2.0%; tighter limit only by written agreement.” - “≥95% through 40 mesh; granulated or finer cut named if supplied.” - “Identification by infrared spectrum and HPLC retention against a reference.” - “Heavy metals, microbiology and pack as listed on the catalog specification.” The grade line should describe what will be shipped, not what could be made. “Zinc malate, 40 mesh” and “zinc malate, granulated” are two specifications with two certificates; a purchase order that names only the salt leaves the physical form open. ## When another salt is the better fit Zinc malate is a sensible default for a capsule or tablet that wants a moderate zinc figure, a low moisture limit and an anion that dissolves more readily in an acidic matrix. It is not the automatic choice everywhere. A clear, neutral ready-to-drink beverage needs a salt that dissolves freely, and the gluconate is the usual answer. A formula already built around a citrate buffer may gain from keeping the citrate, because the anion is part of the pH system. A tablet that is short of mass may need the oxide, provided the formulator accepts that it is practically insoluble. Switching salts is a change control, not a substitution at the weigh-up. The mass per serving, the taste, the rate at which the powder disperses, the stability package and the label all move together. The product hub carries the catalog line; the malate versus citrate comparison works through the zinc arithmetic and the fill; the zinc citrate page gives the other salt's specification; the HPLC method note describes the assay; the quality page covers release. ### 02.1 Zinc malate vs zinc citrate: elemental zinc, solubility and the fill URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-malate/grades/zinc-malate-vs-citrate/ Reviewed: 2026-11-19 Zinc malate and zinc citrate deliver nearly the same zinc per gram: about 33.1% theoretical for the malate, against a catalog range of 31.0–32.5% for the citrate dihydrate on the dried basis. A 10 mg zinc claim therefore needs about 30 mg of either salt, so the fill moves by a milligram or two, not by a reformulation. The differences that decide the choice are the moisture limit, the behaviour in an acidic matrix, the taste and the salt name the destination file covers. In one lineThe two salts deliver about 33% and 32% zinc, so the fill moves by a few milligrams; what really differs is moisture, acid solubility and the label. ## Two salts, two identities Both are zinc salts of a food acid and both are white powders at 40 mesh. They are not interchangeable: the anion is most of the mass and carries the chemistry, the taste and the label name. Zinc malate is the 1:1 salt with malic acid; zinc citrate is the 3:2 salt with citric acid, supplied as the dihydrate. Zinc malate and zinc citrate dihydrate · the catalog figures | Property | Zinc malate | Zinc citrate dihydrate | CAS number | 2847-05-4 | 5990-32-9 | Formula | C4H4O5Zn | Zn3(C6H5O7)2·2H2O | Formula weight | About 197.45 | About 610 | Zinc, theoretical | 33.1% | About 32% on the dihydrate | Zinc, catalog | 32.0–34.0% | 31.0–32.5% on the dried basis | Loss on drying | ≤2.0% | ≤6.0% | Water solubility | Slightly soluble; more soluble in acid | Slightly soluble; buffered suspension | pH of a 5% system | Measured for the lot; no catalog range | 5.0–7.0 for a 5% suspension | Particle size | ≥95% through 40 mesh | ≥95% through 40 mesh The zinc lines are close enough that the salt name, not the percentage, separates them. ## Elemental zinc and the fill The label declares the element, and the capsule holds the salt. At the catalog midpoints — 33.0% for the malate and 31.75% for the citrate — the arithmetic is short. The fill table below uses those midpoints and rounds to one decimal place; a real lot uses its own certificate result. Salt mass needed for a zinc claim · malate at 33.0%, citrate at 31.75% | Zinc claim | Zinc malate | Zinc citrate dihydrate | Difference | 5 mg | 15.2 mg | 15.7 mg | 0.5 mg | 10 mg | 30.3 mg | 31.5 mg | 1.2 mg | 15 mg | 45.5 mg | 47.2 mg | 1.8 mg | 25 mg | 75.8 mg | 78.7 mg | 3.0 mg | 50 mg | 151.5 mg | 157.5 mg | 6.0 mg Six milligrams on a 50 mg claim is about 4% of the salt mass — real in a full tablet or a fixed-weight stick pack, but not a reason to choose a salt in an ordinary 10–15 mg capsule, where both fills fit. The basis has to match before the table is used. The citrate figure is stated on the dried basis; the malate catalog line does not state a basis, so the certificate has to. On an as-is basis the citrate loses more to its two waters of crystallisation, which sit inside the ≤6.0% drying limit, so the as-is gap is wider than the dried-basis gap. Convert first, then compare, then weigh. ## Water, acid and the taste Both salts are described as slightly soluble in water, which is a statement about a concentrated system, not about a drink. At a 10 mg zinc serving the salt mass is about 30 mg; in 250 mL that is dilute, and the practical question is the pH and the taste rather than the saturation point. The malate dissolves more readily as the matrix becomes more acidic. The citrate is also more soluble in acid, but it brings a citrate buffer that resists the pH change the acidulant is trying to make. That difference shows up in an acidic stick pack or a fruit drink. Malic acid is the sharper acidulant, and the malate adds to the sour rather than buffering it; the citrate softens the profile and holds the pH steadier. In a neutral, clear drink neither salt is the natural answer: the gluconate is the freely soluble option, at about twice the mass per milligram of zinc. In an opaque suspension the citrate's buffered dispersion is easier to keep uniform. A bench trial at the real pH settles it faster than a solubility table. ## Moisture, flow and the dry blend The drying limits look far apart, ≤2.0% for the malate and ≤6.0% for the citrate, but they measure different things. Most of the citrate allowance is its two waters of crystallisation, about 5.9% of the dihydrate; the malate line is free moisture. Compare free-moisture headroom and the release result, not the headline. Free moisture decides flow, caking and blend stability. A powder released near its limit has little room for plant humidity, and the malate's lower free-moisture allowance is a useful margin in a humid plant or a long hold. It is not a licence to leave the pouch open. ## What the label and the market file have to say The label names the salt and the elemental zinc. A US Supplement Facts panel declares the dietary ingredient by name, so “zinc” alone does not say which salt was weighed. In the European Union the permitted supplement forms are listed by form, so an entry for one zinc salt does not cover another; the buyer's team confirms the route, and the file has to match the salt on the pack. Great Britain and Northern Ireland are checked separately. The market file is attached to the salt, not to the element. A formula qualified on zinc citrate cannot switch to zinc malate and keep the same label, notification or supporting document without a review. The label zinc figure, the salt name and the specification have to agree, and the COA has to describe the lot shipped. ## When to choose which Choose the malate for a capsule or tablet that wants a moderate zinc figure, a low free-moisture allowance and an anion that behaves well in an acidic matrix. It is also the simpler choice when the label already names zinc malate and the market file has been built around it. Choose the citrate when the formula is built on a citrate buffer, when the existing qualification and stability data belong to the citrate, or when the taste profile calls for a softer acid. Choose neither for a clear, neutral drink at a meaningful zinc dose; the gluconate is the soluble option there. Choose the oxide only when the tablet is short of mass and the formulator accepts that it is practically insoluble. A switch in either direction is a change control: a new specification, a new certificate review, a matrix trial and a label check. The zinc malate hub carries the catalog line; the zinc citrate page gives the other salt; the magnesium malate page shows the same anion with a different element; the methods library covers the assays; the quality page describes release. ### 03 Zinc malate stability: moisture, acid and the pack URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-malate/stability/ Reviewed: 2026-11-19 Zinc malate is chemically stable as a dry solid; the storage risks are physical and microbiological. Moisture pickup raises the loss on drying, cakes the powder and lowers the as-is zinc figure, while the assay on the dried basis can stay inside the specification. In an acidic solution the salt dissolves more readily; a neutral aqueous matrix is the harder format. Shelf life is assigned from stability data for the exact pack and storage condition, not from the certificate. In one lineThe dry salt keeps; the pack has to control moisture, and the matrix has to control pH. ## The powder after the liner is opened The catalog sets loss on drying at ≤2.0%. That is a release gate, not a storage allowance. Once a foil pouch is opened and folded over, the headspace is humid air and the powder can pick up surface water. The loss on drying climbs, the as-is assay falls, and the powder begins to cake in the bag. A lot released well inside the limit has the more useful margin. Zinc malate has no conjugated chromophore that makes light the first concern in the way it is for a polyphenol or a quinone. The pack's job is moisture and contamination, and an opaque or foil pack does that job while also protecting the powder from a humid store. Heat is a rate factor rather than a degradation route: a hot loading bay or a car boot accelerates caking and moisture migration, and a cold store followed by a warm room can put condensation on the powder if the pack is opened too soon. The physical result of moisture is easy to see and easy to underestimate. Caked powder does not flow into a dosator, bridges in a hopper and weighs unevenly, so a lot that still passes the assay can stop the line. The in-use instruction belongs beside the certificate: keep the pack closed, keep it dry and let it equilibrate before opening after cold storage. ## In water, in acid and in the matrix The catalog describes the salt as slightly soluble in water and more soluble in acidic solutions. That is a statement about the solid at high concentration, not a prediction for a drink. At a 10 mg zinc serving the salt mass is about 30 mg; in 250 mL the concentration is low, and whether it dissolves depends on the pH, the temperature and the other ingredients. An acidic stick pack or a fruit-flavoured drink is a different system from neutral water, and the formulator tests the real concentration rather than reading a solubility class. Acidity is the useful variable. In an acidic matrix the malate is protonated and the salt goes into solution more readily; the same acid gives the drink its taste and can mask the metallic note that a zinc salt develops at higher concentration. A neutral matrix offers no such help, and a clear drink at a meaningful zinc dose may need a different salt altogether. Taste, clarity and pH are formulation results, not certificate lines. Solution stability is mostly the stability of the matrix. Zinc itself does not oxidise or hydrolyse away, but the drink can change colour, haze or taste around it, and a wet matrix can support microbial growth if the preservation is inadequate. A bulk-powder result does not transfer to a beverage; the matrix, the process and the pack each change the answer. ## What drives change during storage Factors that move zinc malate during storage | Factor | What it does | Control | Moisture | Raises loss on drying; cakes the powder; lowers the as-is assay | Sealed foil pouch; dry store; desiccant where needed | Acid and pH | Increases solubility; changes taste and clarity in a drink | Validate the matrix pH and the real concentration | Heat | Accelerates moisture migration and caking | Controlled store; cool process; no hot bay | Compaction | Consolidates the powder in a drum or hopper | Use the pack size that turns over; granulated grade | Microbiology | Wet powder or a poorly preserved matrix can support growth | Keep the powder dry; validate preservation and water activity These factors interact. A warm, humid store is worse than either condition alone, and a caked drum that is broken up by hand has already been exposed. The useful stability question is not whether zinc malate is stable in general, but in which pack, at which condition and for how long. ## A stability protocol for the ingredient A protocol fixes four things before the first sample goes into the chamber: the pack, the storage condition, the time points and the tests. The usual warehouse conditions are 25 °C/60% relative humidity for long-term and 30 °C/65% for intermediate, with 40 °C/75% as the accelerated arm. If the route includes a humid or non-air-conditioned warehouse, add a condition that reflects it. Test assay, zinc, loss on drying, appearance, identification and microbiology at each point. For a stick pack or a drink, repeat the work in the matrix at the process pH and heat load, because the powder data does not describe a solution. The report should show the individual results and identify the pack and the lot family; a pass statement without the numbers cannot be trended. ## The dosage form changes the answer Water activity is low in a capsule or tablet, yet the shell and the excipients can still move moisture into the fill. Check loss on drying at release and after storage, and watch the appearance of the powder through the shell or in the opened capsule. A stick pack is only as good as its seal; a pinhole in the foil fails the pack, so inspect the strip as well as the powder. An acidic drink is the format where this salt is most comfortable, and also the format where the matrix has the most variables: pH, acidulant, minerals, flavour and process heat. An overage is a label and stability decision, not a repair for a pack that lets moisture in. If the formula needs a higher zinc figure after storage, the answer is a validated overage or a different salt, and the label has to reflect whichever route is chosen. ## How the shelf life is set No single shelf-life figure applies to zinc malate, because the number is a property of the pack and the storage condition rather than of the salt. The retest period written on the specification comes from the stability file for the pack that will be shipped, and it should name the condition and the test panel that support it. A figure without those three pieces is a marketing statement, not a shelf life. When the retest period ends, re-assay the retained sample before extending use. Extension by assumption is not acceptable, and a bulk drum's data cannot be transferred to a repacked pouch. Start with the catalog page, which lists the standard packs, then the COA page for the release tests and the MOQ page for pack and lead time. The titration note describes the zinc assay, and the quality page describes the release workflow. ### 04 Zinc malate MOQ: packs, lead time and the quote URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-malate/moq/ Reviewed: 2026-11-19 Zinc malate is sold from a 1 kg foil pouch — the minimum order — with a 25 kg fiber drum as the bulk pack; the standard 40 mesh powder is quoted at 1–7 days. A firm quotation needs six details: the salt and CAS number, the grade and the assay basis, the quantity and pack, the destination and Incoterm, the documents, and the intended use and market. In one lineOne kilogram is the smallest order because it is the smallest pack that can carry a lot code, a retained sample and a certificate the customer can test. ## Why the minimum is one kilogram A 1 kg pack covers a bench trial, a retained sample and an independent identity test, and it travels as a parcel rather than on a pallet. That matters when a formulator needs material before the production plan is fixed. The pack is a commercial unit with a lot code; it is not a scoop from a bulk drum. Below 1 kg the material is usually split from a larger lot and repacked. The chemistry does not change, but the original pack identity is lost, the repack has its own handling history and traceability becomes harder. The 25 kg drum is the bulk unit: it reduces handling per kilogram, but it commits inventory and a longer storage period. The minimum is a pack decision, not a volume incentive. ## Packs and formats Standard zinc malate packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, qualification sample, small batch | Moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Particle profile and fill volume change | Finer mesh | On request | Chews, suspensions, sachets | Dust and segregation risk rise The catalog form is a 40 mesh powder: at least 95% through 40 mesh. Granulation or a finer cut is a different grade, not a different packing choice. A grade change alters the particle-size specification and can alter the schedule. ## Lead time and dispatch For the standard pack the quoted window is 1–7 days after the order is confirmed. Picking, paperwork and dispatch sit inside that window; freight transit, customs and the customer's own QA release do not. A granulated grade, a finer mesh or a non-standard pack adds time, and the quotation should show it as a separate line rather than folding it into the catalogue figure. Ask for the dispatch date, not only the lead time. A 25 kg drum may travel on a pallet and a 1 kg pouch as a parcel; the Incoterm decides who books the freight and who clears the entry. The documents should travel with the lot rather than follow it, so the importer is not holding a drum it cannot release. ## What a quotation needs Six items make a quotation firm enough to compare: - Product and salt. Zinc malate, CAS 2847-05-4, with the salt name written out. - Grade and specification. Mesh or granulation, assay and zinc figures, the basis, loss on drying, contaminants and microbiology. - Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated or finer-mesh variant. - Destination and Incoterm. The country and delivery address, plus the trade term that decides who books freight and clears entry. - Documents. COA, specification, SDS and any statement the importer's market requires. - Use and market. Whether the finished product is a supplement, a food or another category, and where it will be sold. A quotation that gives only a zinc percentage has not specified the grade. The same salt at 40 mesh and at a finer cut can price and schedule differently, and a quotation that does not name the mesh is not comparable with one that does. Commercial terms are stated on the quotation, not on this page. ## The sample is a lot, not a demonstration The 1 kg pack also serves as the qualification sample. Before scaling, test identity, assay, zinc, loss on drying and microbiology, and keep a portion of the same pack as the retained sample. The lot code must be the same on the sample, the certificate and the quotation; without that link the material is a demonstration rather than a qualification. A smaller bench quantity can be discussed, but it will be a split from a bulk lot and should be documented as a repack. Do not assume that a bench sample and the production drum share a lot; if lot continuity matters, raise it when the quotation is requested. ## Terms to settle before the first order Commercial terms — the Incoterm, the pack, the dispatch window and the documents — belong on the quotation. The quality terms belong next to them: which specification revision governs the lot, what the COA has to report, how the retained sample is kept, how long the retest period runs and who approves a change to the source, the process or the pack. Putting both sets in one quality agreement before the first production order is easier than negotiating them during a dispute. Returns and replacements follow that agreement. When a lot is questioned, the retained sample and a joint re-test decide the outcome; a photograph of the powder does not. Agree at the start which referee laboratory both sides accept and how the cost of that test is handled. Start with the catalog page for zinc malate, then read the COA page for the release tests and the compliance page for the destination file. The MOQ glossary entry defines the term, and the quality page describes the release record. ### 05 The regulatory file for zinc malate URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-malate/compliance/ Reviewed: 2026-11-19 Zinc is a nutrient in every major market; zinc malate as a form is a separate question. The file for a destination has to show which route the salt is placed on, the contaminant ceilings that apply to the finished product, the label particulars and the claim wording the market allows. The buyer's regulatory team confirms the route. This page lists the framework and the documents the file needs. In one lineThe specification describes the powder; the regulatory file has to show the route, the limits and the label for the destination. ## Four checks, and why the form matters The first check is the route. A mineral salt can be placed on the market as a food supplement ingredient, as a food additive, as a fortified-food ingredient or, where the form has no history of use, through a novel-food authorisation. Those are different legal instruments with different evidence. The second check is contaminants, the third is labelling and the fourth is claims. A lot that meets the catalog specification has cleared none of them by itself. The route is form-specific. Permission for zinc citrate, zinc gluconate or zinc oxide is permission for that salt, not for the malate, and a supplier certificate does not create a permission. A purchase order can outrun the file here: the formula works, but the destination list names a different anion. The buyer's regulatory team confirms the route for the destination and records the basis. Great Britain and Northern Ireland do not share one file. GB uses its own registers and labelling rules; Northern Ireland follows the EU framework. ## European Union Food supplements fall under Directive 2002/46/EC. Annex I lists the vitamins and minerals that may be used, and Annex II lists the permitted forms of each. Zinc is on Annex I; the form has to be on Annex II. The current consolidated text has to be checked for the malate entry, because an entry for another zinc salt does not carry over. If the form is not listed for supplements, the buyer's team looks at another route, such as a novel-food authorisation under Regulation (EU) 2015/2283, a food-additive use under Regulation (EC) No 1333/2008, or addition to foods under Regulation (EC) No 1925/2006. The contaminant rules for supplements sit in Regulation (EU) 2023/915, in force since 25 May 2023 and the replacement for Regulation (EC) No 1881/2006. For the label, Regulation (EU) No 1169/2011 applies together with the supplement particulars in Directive 2002/46/EC. Claims are governed by Regulation (EC) No 1924/2006 and the authorised list in Regulation (EU) No 432/2012. The zinc reference value used for labelling is 10 mg per day; the source-of-zinc nutrition claim needs 15% of that figure in the daily portion, which is 1.5 mg of elemental zinc. Check the current text before artwork is signed. ## United States As of this review, a zinc salt is sold in the United States as a dietary ingredient under DSHEA. The seller must be able to name, and document, the basis that makes the form lawful: a GRAS conclusion, an NDI notification, or evidence of use before 15 October 1994. 21 CFR 101.36 fixes the Supplement Facts format. The panel declares how much elemental zinc a serving supplies and what percentage of the Daily Value that is; the DV for adults and children four years and older is 11 mg. The ingredient line names the salt, so “zinc malate” and “zinc citrate” cannot be swapped on a US label just because the zinc figure matches. A structure/function statement must be truthful and substantiated, and it must carry the DSHEA disclaimer in 21 CFR 101.93. The marketer files a notification with the FDA no later than 30 days after first marketing the product. Disease claims are outside the route. Identity testing of the dietary ingredient is required by the cGMP rule in 21 CFR 111. Federal law sets no lead maximum for supplements; California's Proposition 65 does set a dose-based limit, which the brand checks. ## Contaminants and the finished-product calculation The contaminant ceiling applies to the product as sold, not to the drum. The salt's own limit has to be converted through the dose, and the conversion changes with the serving size. At a 30 mg salt serving in a 500 mg capsule the salt is 6% of the product mass; at a 150 mg serving in a 300 mg capsule it is half. The same salt result is not the same finished-product figure. Contaminant ceilings to confirm for the finished supplement | Parameter | EU supplement ceiling at this review | What the file should show | Lead (Pb) | 3.0 mg/kg of product | Lot result, method, limit and the dose conversion | Cadmium (Cd) | 1.0 mg/kg of product | Lot result and any category exception | Mercury (Hg) | 0.10 mg/kg of product | Lot result and method | Arsenic (As) | No harmonised EU supplement maximum | A buyer-set limit, stated on the specification For arsenic the absence of a harmonised EU figure is not a free pass: the buyer sets a limit in the specification and the certificate reports against it. The catalog line for this product is Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg on the salt, which is a starting point for the dose calculation, not a substitute for it. ## The claims boundary In the EU, nutrition and health claims are a closed list. The source-of-zinc claim is a nutrition claim with the 15% condition above; health claims may use only the authorised wording for zinc. A claim about a deficiency, a disease or a therapeutic outcome is not permitted, and this page does not reproduce claim text for the brand to copy. In the United States, a structure/function statement is allowed with the disclaimer and the notification, while a disease claim is not. A certificate is not a claim approval, and a claim cannot rewrite the specification. The salt name and the elemental zinc figure should be identical across the label, the specification and the COA. ## The document pack Start with the versioned specification and the lot COA. Add the technical data sheet and the SDS, then the origin record, the allergen and GMO statements, the residual-solvent statement (where a solvent is used), the element and microbiology results, and the change-control history. Halal, kosher and non-irradiation statements are added where the market requires them. A folder of undated PDFs is not a file; each document should name the product, the specification version and, where relevant, the lot. ## Checklist before the first order - The salt name, CAS 2847-05-4 and the specification version are named. - The destination route is confirmed in writing by the buyer's regulatory team. - The dose conversion for every contaminant result is on file. - The label particulars and the claim wording are reviewed for the market. - The document pack is complete and dated, and the COA matches the lot. - Source, process and pack are under change control. Begin with the zinc malate catalog page for the specification, then the COA page for the lot certificate and the identity page for the analytical evidence. The ICP-MS note describes the element panel, and the quality page describes the release file. ### 06 How we prove a zinc lot is zinc malate URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-malate/identity/ Reviewed: 2026-11-19 A zinc malate lot is the malate only when the anion and the element agree. Infrared and HPLC identify the malate, complexometric titration gives 32.0–34.0% zinc, and the 1:1 ratio closes the mass balance. The zinc figure alone cannot prove the salt: zinc citrate carries almost the same percentage of zinc, and a blend can be built to land inside the range. In one lineZinc malate is proved by the malate anion and the zinc figure together; the element alone cannot separate the salt from a citrate or a blend. ## The four identity layers Identity is not one test. A certificate can carry the correct name and still say nothing about the powder. Each question below needs its own evidence, and the four layers read in order. Four layers of zinc malate identity | Layer | Question | Test | What it proves | Document | Is the salt named? | Name, CAS 2847-05-4, formula | Paperwork only | Anion | Is the anion malate? | Infrared spectrum and HPLC retention | The malate, not the metal | Element | How much zinc is present? | Complexometric EDTA titration | The zinc figure, from any source | Mass balance | Do the numbers describe one salt? | Assay, zinc, loss on drying | Consistency of the results Layer four is the one buyers skip. A zinc result inside 32.0–34.0% and an assay inside 98.0–102.0% look like a pass, but they can come from different powders if the ratio between them is wrong. It costs nothing to run on the certificate. ## The 1:1 ratio and the mass balance Zinc malate is a 1:1 salt of the divalent zinc ion and the divalent malate ion, C4H4O5Zn, with a formula weight of about 197.45. Zinc is 65.38 of that mass, or 33.1%; the malate is the remaining 66.9%. The mass ratio of malate to zinc is therefore about 2.02 to 1. The check runs two ways. Divide the zinc result by the assay and compare it with 0.331: a lot at 99.0% assay should carry about 32.8% zinc. Or divide zinc by malate and compare with 0.495. A zinc figure above the ratio points to a denser zinc source, and zinc oxide at 78.0–80.0% is the obvious one. A figure below the ratio points to a carrier, to a zinc salt with a lower fraction such as the gluconate, or to excess malic acid that raises the assay without adding zinc. None of those conclusions replaces the anion test; the ratio tells the reviewer where to look next. The loss on drying closes the balance. At ≤2.0% the moisture allowance is small, so the as-is and dried-basis figures sit close together. If the hydrate state is declared, it changes the formula weight and the expected zinc figure, and the specification has to carry it. Do not compare a zinc result from a hydrate with a ratio calculated for the anhydrous formula. ## X-ray diffraction and the phase question X-ray diffraction answers a different question from the assay: which crystalline phases are present in the solid. For zinc malate it detects crystalline zinc oxide, which is the most likely high-zinc contaminant, and it can compare the salt's pattern with a reference from another source. It does not measure purity, and it does not measure the counter-ion. A “match” statement without the reference pattern and the detection limit has added little to the file. XRD is not a routine release test here. Order it for a new source, a suspected second zinc source, a solid-state dispute or a form claim that the certificate does not prove. Ask for the sample preparation, the reference used and the limit of detection for crystalline oxide, because a “not detected” line without that limit describes the method rather than the drum. Infrared is the routine anion check and XRD is the phase check; they are complementary. A lot can show the malate bands by infrared and still contain a crystalline oxide phase that the infrared does not resolve at low concentration. ## What substitution looks like Zinc malate substitutions and the signals that expose them | Substitution route | What shifts | Test that catches it | Zinc oxide added | Zinc climbs toward 78–80%; assay slips; pH moves | Zinc-to-assay ratio; XRD for crystalline oxide | Zinc citrate substituted | Zinc stays near 32%; the anion changes | Infrared and HPLC malate identity | Zinc gluconate blended in | Zinc drops toward 14%; solubility changes | Zinc figure; infrared; HPLC | Excess malic acid | Assay rises; zinc falls; ratio drops; pH falls | Ratio; pH; quantitative malate | Carrier dilution | Assay and zinc fall together | Mass balance; loss on drying; residue | Moisture | As-is assay falls; loss on drying rises | Loss on drying; dried-basis calculation The citrate route is the one that catches buyers out. Zinc citrate dihydrate is specified at 31.0–32.5% zinc on the dried basis, so a citrate lot can sit inside the zinc range of a malate specification. The element does not distinguish them. The malate bands in the infrared spectrum and the malate retention in the HPLC method do; the anion test is therefore not optional. Zinc oxide is the opposite case: it is easy to see in the zinc figure because it is so concentrated, and easy to confirm by diffraction. The blend route is the quiet one, because a formulator can dilute the salt with a carrier and keep both the assay and the zinc figure inside the range if the carrier is chosen carefully. ## How to write identity into the specification - “Zinc malate, CAS 2847-05-4, C4H4O5Zn; hydrate state named if one is declared.” - “Assay 98.0–102.0% by HPLC; zinc 32.0–34.0% by complexometric titration; basis and method stated.” - “Identification by infrared spectrum and HPLC retention against a named reference.” - “Loss on drying ≤2.0%; the as-is and dried-basis results both reported.” - “No added zinc oxide, zinc citrate, zinc gluconate, malic acid or undeclared carrier.” - “Lot number, manufacturing site and specification version on the certificate.” The prohibitions carry as much weight as the positive ranges. A zinc range does not exclude a second zinc source, and a supplier cannot be held to a restriction the specification never states. Name the reference in the specification; “conforms” against an unnamed reference cannot be repeated. ## Five questions for a supplier - Can you provide the infrared spectrum and the HPLC chromatogram, not only the assay percentage? - What zinc result and basis belong to this lot, and which titration method was used? - Do the assay, zinc and loss on drying close the 1:1 mass balance, and what is the calculated zinc-to-malate ratio? - Does the lot contain anything beyond the salt — oxide, citrate, gluconate, malic acid or a carrier? - Will you supply an XRD screen for crystalline zinc oxide and a retained sample if the lot is disputed? Five specific answers amount to an identity file; one assay percentage does not. Start at the zinc malate hub for the catalog line, then use the COA page to see where each figure sits on the certificate and the grades page for the physical variants. The malate versus citrate comparison explains why the zinc figure alone cannot separate the two salts; the FTIR and XRD notes describe the methods. ### 01 What the COA for zinc oxide actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-oxide/coa/ Reviewed: 2026-11-19 A certificate for a zinc oxide lot reports appearance, identification by IR and complexometric titration, the oxide assay at ≥99.0%, elemental zinc at 78.0–80.0%, loss on drying below 0.5%, lead and the other heavy metals per element, microbiology and particle size. The assay and the zinc figure describe the same powder from two directions, so they have to share one basis. The lead result and the particle-size result are what separate a supplement grade from a technical one. In one lineTwo numbers describe the same powder — the oxide assay and the elemental zinc — so the certificate has to fix the basis of both before the lead figure decides the grade. ## The certificate as a test report A zinc oxide certificate is short, and each line should still carry the parameter, the method and the release limit. There is no ligand or hydrate to prove; the risk is a grade that was never intended for food or supplement use, or a purity figure copied without its method. The identity row is a pair of tests. IR confirms the Zn–O lattice and shows whether a carbonate or a hydroxide has formed; the titration confirms the zinc proportion. Neither is a purity figure on its own. Identity, assay, moisture and contaminants · zinc oxide | Parameter | Method | Release limit | Appearance | Visual | White powder | Identification | IR and complexometric titration | Conforms to the reference | Assay (ZnO) | Titration after acid dissolution | ≥99.0% | Zinc (Zn) | Complexometric titration | 78.0–80.0% | Loss on drying | Gravimetric | ≤0.5% | Heavy metals | ICP-MS | Lead, arsenic, cadmium, mercury: ≤3, ≤2, ≤1 and ≤0.1 mg/kg | Microbiology | Total plate count and absence tests | Total plate count ≤1,000 cfu/g; yeasts and moulds ≤100 cfu/g; E. coli and Salmonella not detected | Particle size | Sieve analysis | ≥95% passing a 40 mesh sieve ## The assay, the zinc figure and the basis The oxide assay and the elemental zinc are two arithmetic views of one result. Zinc is 65.38 of the 81.38 g/mol of ZnO, so pure oxide is 80.34% zinc and 19.66% oxygen. A 99.0% oxide assay therefore corresponds to about 79.5% zinc, which sits in the middle of the catalog range. When the two numbers disagree by more than that arithmetic allows, one of them is on a different basis or the sample is not the oxide. The basis has to be named. A result as received, a result on the dried basis and a result on the ignited basis are three different numbers for the same powder once the loss on drying is 0.5%. The oxide holds little water, so the spread is small compared with a hydrate, but the line still has to state its basis. The assay method also has a preparation step that matters. The oxide is practically insoluble in water, so the sample has to be dissolved in acid before the EDTA titration. A method copied from a soluble zinc salt without that step will under-report, and the under-report looks like a purity problem rather than a preparation problem. Ask whether the acid dissolution is written into the method, and which acid is used. ## Release limit versus batch result A release limit is the boundary the lot was accepted against; a batch result is what the laboratory measured. They belong in separate columns, with the method beside them. A result column that repeats the specification has reported nothing about the lot. What the result column should contain for a zinc oxide lot | Parameter | Release limit | Result column | Assay (ZnO) | ≥99.0% | A measured figure with its basis and the acid-dissolution step | Zinc (Zn) | 78.0–80.0% | A measured percentage, consistent with the assay arithmetic | Loss on drying | ≤0.5% | A measured percentage | Lead | ≤3 mg/kg | A figure in mg/kg with the detection limit | Particle size | ≥95% through 40 mesh | The percentage that passed the sieve Lead deserves its own line rather than a place in a summed heavy-metals total. A total hides the element that decides the grade, and lead is what most often separates a food or supplement grade from a pigment or technical grade of the same oxide. One summed figure tells the reader less than four per-element results. ## What moves between batches The chemistry of the oxide is fixed; the variation sits in the physical specification and in the trace elements. Particle size, surface area and bulk density move with the milling and the calcination step. Whiteness moves with trace iron and with particle size. Lead moves with the zinc source: an oxide made from refined zinc metal starts lower than one made from an ore concentrate, and the certificate is where that difference has to show. Loss on drying is usually small, but it is the line that catches a change in the pack or in the store before the assay notices. A rising loss on drying with a falling as-is assay is moisture, not a purity loss. A lot above the 0.5% limit may also be carrying surface carbonate picked up from carbon dioxide and moisture in the air. Read the trend across lots, not one result at the edge: lead creeping up, the mesh drifting coarser, or a carbonate shoulder in the IR spectrum. The lot code printed on the certificate must also appear on the pouch or drum and on the retain. ## When to order an outside test An outside test is worth ordering in four situations: before a first shipment into a regulated market, when a new source is qualified, when a grade claim is not supported by the certificate, and when a result is disputed. The panel should not be a copy of the certificate. It should be IR for identity, titration after acid dissolution, moisture, ICP-MS for the elements, and a sieve result. Add XRD when the question is the solid state: it confirms the zincite pattern and shows whether a carbonate or a hydroxide phase is present. Add ICP-OES for calcium, titanium and sulfur when a dilution is suspected, and a water extraction with a sulfate test when a soluble zinc salt may be present. Require a detection limit beside every screen. A “not detected” line with no limit describes the method, not the sample. The material tested should be the retain, and the report should carry the lot number. ## What to compare between two suppliers Set six lines side by side: grade and intended use, assay and basis, elemental zinc, lead and the other elements, loss on drying, and particle size with the method. A pair of offers that match on assay and disagree on grade or on lead describes two different powders. Traceability comes next: who made the oxide, from which zinc source, and which milling and packing steps followed. The catalog specification is published on the zinc oxide product page, and the grade detail is on the grades page. The tests that separate the oxide from a carbonate, a sulfate or a dilution are collected on the identity page; the titration is described in the complexometric method note; the release workflow is described on the quality page. ### 02 Which zinc oxide grade: supplement, feed, technical or pharmacopoeial URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-oxide/grades/ Reviewed: 2026-11-19 Zinc oxide is a single chemical, so the grade is not a different molecule but a different specification: the lead and heavy-metal panel, the particle size and surface area, the presence or absence of a coating, and the documentation written against a food, feed, pharmacopoeial or technical standard. A supplement grade is defined by the contaminant panel at the finished dose; a pigment grade is defined by colour and reactivity. The two are not interchangeable even when both assay above 99%. In one lineZinc oxide is one molecule; the grade is the lead result, the particle size and the documentation written around it. ## Why one oxide has several grades The oxide is made by oxidising zinc vapour, by oxidising an ore concentrate, or by precipitating a zinc salt and calcining the precipitate. Each route gives a different particle size, a different surface area and a different trace-element profile. The chemistry is the same; the powder around it is not. The commercial names follow the use. A grade written for rubber, ceramics or paint is judged on colour, tint strength and reactivity. A cosmetic or UV grade is judged on particle size, dispersion and often a surface treatment. A grade written for feed or food is judged on the contaminant panel and on the documentation. A pharmacopoeial grade is written for pharmaceutical use and carries its own monograph tests. None of these is a stricter version of another; they are different gates. ## The grades side by side Zinc oxide grades and what each specification is written against | Grade | Written against | Lead and trace elements | Particle size | What the file carries | Supplement / food | Contaminant panel at the finished dose | Low; per-element results | Milled, ≥95% through 40 mesh | COA, TDS, SDS, allergen and GMO statements | Feed | Feed-additive rules and maximum content in feed | Low; per-element results | Milled or granulated | Feed-additive identity and incorporation limits | Pharmacopoeial | A pharmacopoeial monograph | Monograph tests, not the food panel | Monograph description | Monograph compliance statement | Technical / pigment / cosmetic | Colour, tint, UV performance or reactivity | Not written for a food ceiling | Set by optical or UV performance | Technical data sheet only | Granulated | The same chemistry, a coarser particle | Follows the base grade | Agglomerated, low dust | COA with the granulation stated The first column is the one to write into the purchase order. “Zinc oxide 99%” does not name a grade; it names an assay that all five rows can meet. ## Particle size, surface area and flow Particle size is a functional line, not a cosmetic one. A finer oxide has more surface per gram, dissolves faster in acid and disperses more readily, but it also makes more dust, packs more tightly and can be harder to blend. A coarser or granulated oxide flows better and carries less dust, which matters on a tableting line and in a weighing booth. The catalog form is a powder milled to ≥95% through 40 mesh, with granulation available on request. The mesh figure is a sieve specification: it says what passed a 40 mesh screen, not what the primary particle size is. A pigment grade can pass the same sieve and still be built from primary particles an order of magnitude smaller, because those particles are agglomerated. If the formula depends on the reaction rate, ask for the surface area as well as the mesh. Bulk density follows the same logic. The oxide is dense for a mineral powder, so a capsule holds a small mass of it relative to an organic salt. That helps when the dose is high and the fill weight is the constraint, and it makes a small mass harder to spread evenly through a large blend. ## Which grade fits which dosage form A capsule or tablet takes the milled supplement grade. The mass per dose is small, the powder is dense and free-flowing enough to fill, and the contaminant panel is the deciding line. A tablet may prefer a granulated grade for flow and for less dust; the granulation is a physical change, and the certificate should say so. A powder blend takes the same grade, but the small mass of oxide in a large blend is a uniformity risk. The oxide is dense, insoluble and white, and it can settle away from the light excipients. Match the particle size to the blend and validate the mixing step rather than assuming that a 40 mesh powder distributes itself. A drink mix is the case where the grade alone does not solve the problem. Zinc oxide does not dissolve in water to any useful degree, so a drink mix built on it is a suspension, and a clear drink needs a different zinc source. That comparison is on the oxide-versus-sulfate page. ## What to write into the specification - “Zinc oxide, ZnO, CAS 1314-13-2, supplement grade, not a technical or pigment grade.” - “Assay (ZnO) ≥99.0%; zinc 78.0–80.0%, both on the dried basis.” - “Lead ≤3 mg/kg; arsenic ≤2, cadmium ≤1, mercury ≤0.1 mg/kg, reported per element.” - “Loss on drying ≤0.5%; particle size ≥95% through 40 mesh; surface area on request.” - “Microbiology as listed; no coating and no carrier unless declared.” - “Grade statement, source and change-control route named on the certificate.” Two lines do most of the work. The grade statement stops a pigment lot from being substituted, and the per-element lead result makes a substitution visible if it happens. The assay on its own proves neither. ## When the oxide is the wrong grade If the formula needs the zinc in solution, the oxide is the wrong starting point at any grade: a finer powder makes a better suspension, not a solution. If the market file covers a different zinc compound, the grade question is secondary to the form question. And if the application is pharmaceutical rather than a supplement, a pharmacopoeial grade and its monograph are the relevant specification, not a food panel with a mesh line attached. The converse matters too. A buyer who needs a dense, high-zinc powder for a compact tablet should not accept a lighter, more soluble salt because the assay looked similar. The grade is part of the material. The oxide's catalog specification is on the product page. Line-by-line reporting is on the COA page; the tests that stand behind the grade are on the identity page; the zinc citrate page covers the alternative when a more soluble salt is wanted; the release file is described on the quality page. ### 02.1 Zinc oxide vs zinc sulfate: elemental zinc, solubility and the route URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-oxide/grades/zinc-oxide-vs-sulfate/ Reviewed: 2026-11-19 Zinc oxide and zinc sulfate heptahydrate carry very different amounts of zinc: about 80% against about 23%, so the same 10 mg zinc dose needs about 13 mg of the oxide or about 44 mg of the heptahydrate. The oxide is practically insoluble in water and dissolves in acid; the sulfate is freely soluble and carries about 44% water of crystallisation. The dosage form, not the assay, decides which one fits. In one lineTen milligrams of zinc is about 13 mg of zinc oxide or about 44 mg of zinc sulfate heptahydrate, and the solubility decides which form the dosage form can use. ## Two forms, two zinc figures The arithmetic starts with the formula. One mole of ZnO weighs 81.38 g and 65.38 g of it is zinc, so pure oxide is 80.34% zinc; the catalog range is 78.0–80.0%. Zinc sulfate heptahydrate, ZnSO4·7H2O, is 287.56 g/mol and carries one zinc, so it is 22.7% zinc, and roughly 44% of its mass is water of crystallisation. The anhydrous sulfate sits between them at about 40.5%. Zinc oxide and zinc sulfate heptahydrate compared | Property | Zinc oxide | Zinc sulfate heptahydrate | Formula | ZnO | ZnSO4·7H2O | CAS number | 1314-13-2 | 7446-20-0 | Molecular weight | 81.38 | 287.56 | Zinc content | About 80.3% (catalog 78.0–80.0%) | About 22.7% | Water of crystallisation | None | About 44% by mass | Solubility in water | Practically insoluble | Freely soluble | Behaviour in acid | Dissolves to the zinc ion | Already in solution | Mass for 10 mg zinc | About 12.6 mg | About 44 mg The last row is the one that changes a formulation: the same declared dose is a few milligrams of oxide or more than three times that mass of sulfate, and the difference moves into the capsule size, the tablet weight and the share of the blend the zinc source occupies. ## Solubility and what it decides The oxide is practically insoluble in water, at a few milligrams per litre, so a zinc oxide drink is a suspension rather than a solution. The sulfate dissolves freely, so it can be used in a clear liquid, a syrup or a stick pack that has to disappear in water. That is the practical dividing line between the two forms. The oxide is amphoteric: an acid takes it to the zinc ion and a strong alkali to a zincate, and both are reactions a formulator can plan for. The sulfate is a salt that is already in solution, and it brings sulfate with it, which adds to the ionic load and to the taste of the finished product. Solubility is not the same as what happens in the body. How much zinc is absorbed from a given form is a clinical question; the formulation question here is narrower: can the dosage form carry the material in the state it needs? ## Fill weight, blend uniformity and taste For a capsule, the fill-weight difference is real but rarely decisive at 10 mg of zinc: both 13 mg and 44 mg fit. It becomes decisive when the dose is high, the capsule is small, or the zinc source shares the fill with other actives. At 25 mg of zinc, the sulfate needs about 110 mg against about 31 mg of oxide, and the gap starts to shape the formula. In a powder blend, the oxide's small mass is a uniformity risk. A dense, insoluble white powder at 2% of a blend can settle away from the light excipients, while the sulfate at 8% disperses differently because it is more soluble and less dense. Neither is automatically easier; the mixing step has to be validated for the material chosen. Taste separates them in a drink. The sulfate is astringent and metallic at use level, while the oxide is chalky and settles. A flavoured suspension and a clear drink are different products, so the form follows the product. ## The route: what the framework asks In the EU, the reference framework is Directive 2002/46/EC, whose Annex II names the mineral substances and their salts that may be used. Zinc oxide and zinc sulfate are separate entries, so the label has to name the form that was used. The feed and food-additive routes are separate instruments with their own limits. The buyer's regulatory team decides which one applies to the destination and to the product. The US route is the dietary-supplement framework: the panel declares elemental zinc, and the ingredient list names the source. Whichever route applies, the form on the label, the form on the certificate and the form in the drum have to be the same material. The route is also physical: a clear beverage cannot carry the oxide, and a dry capsule does not need the sulfate's water. Most failures here are a mismatch between route and form, not a purity problem. ## What the label has to say The label names the source and declares the element. In the EU the ingredient list carries the name from the permitted list, and the nutrition declaration gives zinc in mg and its share of the 10 mg/day reference intake. In the US the Supplement Facts panel gives zinc in mg and its percentage of the 11 mg Daily Value, with the source in the ingredient list. The two forms are not interchangeable on a label. A formula switched from sulfate to oxide without a label change would name the wrong ingredient, and a blend that contains both has to name both, in order of weight. The element declaration stays the same; the source declaration does not. The dose declaration has to match the weigh-up. A label that declares 10 mg of zinc from the oxide assumes about 12.6 mg of oxide; the same 10 mg from the sulfate needs about 44 mg. An overage or a conversion applied to the wrong figure is a labelling error before it is a quality one. ## When to choose which Choose the oxide for a capsule, a tablet or a dry blend where the dose is small, the fill weight is tight, and the material has to be dense, white and stable in the pack. It also suits an acidic drink mix that dissolves it at the point of use, and a formula where the sulfate's water and taste are a problem. We supply the oxide. Choose the sulfate when the zinc has to be in solution, when a clear liquid is the product, or when the process is built around a soluble salt. The heptahydrate is the common commercial form; the anhydrous salt is the option where the water of crystallisation is unwanted, at a different zinc figure again. If the formulation needs a salt other than the sulfate, the catalog's alternative is zinc citrate dihydrate, which is only slightly soluble in water — check that before designing a clear drink — and the zinc bisglycinate page covers the chelate route for a dry blend. The oxide's specification sits on the product page; its own grade question is covered on the grades page; the destination file is covered on the compliance page; the assays are explained in the methods library; the quality page sets out the release process. ### 03 Zinc oxide is stable in the pack; the surface and the matrix are what change URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-oxide/stability/ Reviewed: 2026-11-19 Dry zinc oxide is chemically stable: it is already the fully oxidised form, it does not hydrolyse in a sealed pack, and its assay does not drift on storage. What changes is the surface and the physics — moisture uptake, reaction with carbon dioxide to a basic carbonate, caking and dust — and, in a formula, the reaction with acids and the photocatalytic effect of the oxide under ultraviolet light. Shelf life is assigned from data for the pack, not from the chemistry of the oxide. In one lineThe oxide does not oxidise or hydrolyse in the pack; moisture, carbon dioxide and an acidic or UV-exposed matrix are what change the result. ## The powder in the pack The ≤0.5% loss-on-drying limit is a release gate, not an allowance for storage. The oxide takes up little water, but a fine powder has a large surface, and an open pouch in a humid room will show a rising loss on drying and a caking tendency before the assay moves at all. The second reaction is with carbon dioxide. Zinc oxide can form a basic zinc carbonate at the surface when moisture and CO2 are both present, and the product of that reaction does not show in the assay: the zinc figure stays inside the range while the surface chemistry changes. In a formula where the oxide has to react with an acid, a carbonated surface reacts more slowly. Keep the pack sealed and the headspace dry, and read the IR spectrum if a batch behaves differently from the previous one. Heat is not a risk at normal process temperatures. The oxide is thermally stable well above any drying or tableting condition, and it does not melt or decompose in a dryer. The pack, not the temperature, is the variable unless the process itself is hot and wet at the same time. ## A slurry is not a solution Water does not dissolve the oxide to any useful degree, so a zinc oxide solution is really a suspension. The particles settle, the slurry is mildly alkaline, and the appearance depends on the particle size and on the dispersion step. A clear drink cannot be built on the oxide, and a suspension needs a thickener, a homogenisation step and a stability test that watches for settling rather than for assay loss. The oxide is amphoteric: dilute acid takes it to the zinc ion, strong alkali takes it to a zincate, and both reactions are open to a formulator. An acidic drink mix can dissolve the oxide when the consumer adds water, but the acid step shifts the pH of the finished product and has to be designed rather than assumed. In a liquid, light adds a second path. Zinc oxide absorbs ultraviolet light and, under UV, can catalyse reactions in the organic material around it. The oxide itself does not degrade; the matrix can. A clear bottle on a shelf is the case to test, and an opaque pack is the simple control. ## What drives change Factors that change zinc oxide in storage and in a formula | Factor | What it does | Control | Moisture | Raises loss on drying; caking and surface carbonate | Sealed pouch, dry store, desiccant where needed | Carbon dioxide | Forms a basic carbonate at the surface | Sealed pack, low headspace, first in first out | Acid | Dissolves the oxide to a zinc salt; pH moves | Design the acid step; check pH and clarity | Alkali | Dissolves to zincate at high pH | Keep the matrix away from strong alkali | Ultraviolet light | Photocatalytic reactions in the matrix | Opaque pack; test the matrix in light | Heat in a wet process | Accelerates carbonate and acid reactions | Cool, dry process; validate the hold | Particle size | Finer powder reacts and settles faster | Fix the mesh and the surface area The factors combine. A warm, humid store with an open pouch gives moisture and carbonate together, and the formula that follows can behave differently without any line on the certificate moving. ## A stability protocol for the ingredient Long-term storage at 25 °C/60% relative humidity, intermediate storage at 30 °C/65% and accelerated storage at 40 °C/75% cover the warehouse and the transport case. For a food or supplement ingredient the accelerated arm is a stress test rather than a shelf-life claim, and the pack in the trial must be the pack that will be sold. Test the parameters that can move: loss on drying, IR identity, assay and zinc, particle size, bulk density and, at the end points, the lead result. Appearance and the absence of caking belong in the record too, because they are the changes a customer sees first. A carbonate screen by IR is worth adding when the pack uses paper, board or a liner that is not a moisture barrier. Run the finished formula separately. A capsule, a tablet, a powder blend and a drink mix each expose the oxide to a different matrix, and the bulk result does not carry across. ## The finished formula changes the answer A dry capsule or tablet has low water activity and the oxide is stable in it. The risks are physical: segregation in a blend, dust in the filling room, and a granulated grade that behaves differently from the milled one. Check content uniformity, not only the bulk assay. An acidic powder blend is a chemical case. Ascorbic acid, citric acid or a fruit acid with moisture can dissolve part of the oxide, release water and change the pH of the powder. The reaction may be harmless or may cause caking and a colour change; either way it should be tested rather than discovered on the shelf. An effervescent or instant drink is the deliberate version of the same reaction. The acid dissolves the oxide when water is added, and the solution is clear only if the acid is in excess and the oxide is fine enough. That is a formulation design, and its stability belongs to the finished product. ## How the shelf life is set No single shelf-life figure is published for this oxide. The pack and the storage condition set the period, and it is written into the specification and backed by data generated in that pack. A figure with no pack, no condition and no test panel is a claim, not a shelf life. Once the retest period ends, the retain is re-assayed before any extension is agreed. An extension is never assumed, and a figure from the bulk pack does not transfer to a container that was repacked elsewhere. The standard packs are listed on the zinc oxide product page; pack and lead time are on the MOQ page; the release tests are on the COA page; the elemental panel is explained in the ICP-MS note; the release process is set out on the quality page. ### 04 Zinc oxide: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-oxide/moq/ Reviewed: 2026-11-19 The minimum order is 1 kg in a foil pouch and the production pack is a 25 kg fiber drum; standard dispatch runs 1–7 days from order confirmation. A quotation becomes comparable only when it names the grade, the specification, the pack, the destination and the documents. At about 79% zinc, a kilogram is far more zinc than a trial consumes, so the minimum is better read as the smallest sealed and labelled lot rather than as a volume threshold. In one lineA kilogram of oxide carries about 790 g of zinc, so the minimum is a traceability unit rather than a volume threshold. ## Why the minimum is 1 kg One kilogram of this oxide contains roughly 790 g of elemental zinc. A bench trial uses grams, and even a pilot batch rarely needs the whole pack, so the figure that matters is not how much material the minimum delivers but what the pack can prove. It is the smallest unit that can be filled, sealed, given a lot code, sampled and retained as one identity. Repacking below that unit is possible, but it moves the material out of the manufacturer's pack and into someone else's. A split has no original seal and no original lot code, and any claim about the lot has to be rebuilt from records. The 25 kg drum is the production unit: it cuts handling per kilogram and ties the buyer to one lot for the length of the run. ## Packs and formats Zinc oxide packs and what each one is for | Pack | Fill | Used for | Handling | Foil pouch | 1 kg | First order, trial batch, retain | Keep sealed; the foil is the moisture barrier | Fiber drum | 25 kg | Production | Liner closed; record the opening date | Granulated | On request | Filling lines that need flow | Less dust; the mesh line changes | Split | On request | Laboratory trial | A repack from a bulk lot, documented as such The catalog powder passes a 40 mesh sieve. Granulation is a separate physical specification rather than a packing variant, and it can move the dispatch date. A filling line that needs a coarser, less dusty powder should say so before the quotation is built, because the specification changes with the mesh. ## Lead time and dispatch Standard dispatch is quoted at 1–7 days after the order is confirmed. Picking, documents and handover to the carrier sit inside that window; the transit, the customs entry and the buyer's own release do not. A granulated grade or a split pack is quoted with its own date. The dispatch date is worth asking for separately from the lead time. A drum ships on a pallet and a pouch ships as a parcel, and the Incoterm decides who books which. The certificate and the packing list should leave with the lot; a document pack that follows a week later delays the release at the other end. ## What a quotation needs A quotation can be compared only if it answers six questions: - Which grade. Supplement, feed, pharmacopoeial or technical, written out rather than implied by an assay. - Which limits. Assay and zinc on a named basis, the per-element lead result, moisture and mesh. - Which pack. Pouch, drum, granulated or split. - Where it goes. Country, address or port, and the trade term. - Which paperwork. COA, TDS, SDS and any statement the importer has asked for. - What it is for. Supplement, food, feed or another use, and the market of sale. An offer that quotes an assay without a grade leaves the most important line open, because a pigment lot and a supplement lot can share the same assay figure. Commercial terms are given in the quotation and are not published here. ## A sample that carries its lot code The pouch is a qualification unit. Before the first drum, test identity by IR, the assay and the zinc figure, moisture, lead and the sieve result on the pouch, and hold back material from that same pack as the retain. Sample code, certificate and quotation should carry one lot number. If the project needs only grams, ask for a split and note what it is. A split and the later drum may come from different lots, so a result on the split is an indication of the material, not a release of the drum. ## Terms to settle before the first order Commercial terms sit in the quotation: the trade term, the pack, the dispatch window and the document list. The quality terms sit next to them, and they are worth writing down before the first production order: the specification revision, the certificate per lot, the retain, the retest period, and the notice route for a change of source, grade or pack. A failed lot is settled on evidence, not on a photograph. Agree in advance which retained sample is used, which laboratory arbitrates and who pays for the referee work, and put the answer in the quality agreement. The catalog specification is on the zinc oxide product page; the release tests are listed on the COA page; the market file is on the compliance page; storage is on the stability page; the glossary entry for MOQ defines the term; the quality page describes the release workflow. ### 05 The regulatory file for zinc oxide URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-oxide/compliance/ Reviewed: 2026-11-19 Zinc oxide reaches a market through a defined route, and the file has to show that the grade, the lead result and the label match that route. In the EU, the supplement framework is Directive 2002/46/EC; Annex II carries the permitted mineral substances and their salts, and zinc oxide is one of the zinc entries. In the US the route is the dietary-supplement framework, with elemental zinc on the panel and the oxide in the ingredient list. Which route covers the destination and the finished product is for the buyer's regulatory team to confirm. In one lineThe oxide entry, the lead ceiling and the label wording are three separate checks, and the grade has to be written into all three. ## The four checks A zinc oxide file answers four questions. Is the form on the destination's permitted list? Is the grade the one that list, or the customer, expects? Are the contaminant results below the ceiling at the finished dose? And does the label carry the source and the zinc figure in the form the market asks for? The four answers move independently. A form accepted in one market may be unlisted in another; a ceiling set for the finished product cannot be applied to the drum; a label that satisfies one regulator may fail the next. The certificate answers the lot question, not the route question. ## European Union Food supplements in the EU are governed by Directive 2002/46/EC, whose Annex II lists the permitted mineral substances and their salts. Zinc oxide is named there as a zinc source, in a separate entry from the other zinc compounds, so the label has to match the form on the certificate. The listing is the start of the review: the Member State notification, the label rules of Regulation (EU) No 1169/2011 and the ceilings in Regulation (EU) 2023/915 sit on top of it. The EU reference intake for zinc is 10 mg/day, and the tolerable upper intake for adults is 25 mg/day as of this review. Both matter at the dosage stage: a formula already near the upper level has little room for a second zinc source, so a blend can turn into a compliance problem. They are references for the formulation review, not targets for the label. The food-additive and fortification routes are a different question, and a product sold as a food rather than a supplement may fall outside the Annex II framework. This page is a snapshot: Annex II and the claim register change, so check the consolidated text on the day the label is signed off. ## United States The US asks a different first question: what is the basis for this exact form as a dietary ingredient? The answer may rest on a marketing history before DSHEA, on a GRAS conclusion for the intended use, or on a new dietary ingredient notification. A supplier ought to be able to name the basis and produce the document behind it; the brand confirms it covers the finished product. The Supplement Facts panel carries zinc as the element, in milligrams, with its share of the Daily Value, which is 11 mg for adults and children four and older. The oxide sits in the ingredient list. The claim review is separate: a structure/function statement is the brand's own text, supported by the brand's evidence, and it must carry the DSHEA disclaimer; a disease claim is outside the framework. No federal maximum for lead is written specifically for supplements; the California Proposition 65 threshold, read against the daily dose, may decide whether the label needs a warning. That state question belongs in the file too. ## Contaminants and limits The panel is calculated on the finished product, not only measured on the drum. A supplement file starts with the table below; the destination text and the daily dose set the final figure. Contaminant ceilings to check against the daily dose | Element | Reference level for a supplement | Evidence to keep on file | Lead | 3.0 mg/kg in the EU supplement | Lot result, method, detection limit and the finished-product calculation | Cadmium | 1.0 mg/kg in the EU supplement | Lot result and any category exception | Mercury | 0.10 mg/kg in the EU supplement | Lot result and method | Arsenic | Not harmonised in the EU; Member State limits possible | The limit agreed with the customer, the method used and the lot result For zinc oxide the lead line does more work than the others. The oxide comes from a zinc source, and a technical or pigment grade is not written against a food ceiling; a lot that would be unremarkable as a pigment can sit far above 3 mg/kg. That is why the grade statement and the per-element result belong in one specification. ## Claims and labelling The EU claim framework is Regulation (EC) No 1924/2006, with the Union list of authorised claims in Regulation (EU) No 432/2012. Zinc statements appear there with conditions of use, and they describe normal function rather than disease. In the US a structure/function statement is the brand's own wording, and the disclaimer sits beside it. A statement about a disease is outside both frameworks. No statement here is a claim for the ingredient. This page publishes the specification and the regulatory map; the label wording and its evidence are the brand's. ## The document pack The file normally holds: - A certificate for the lot, covering assay, zinc, loss on drying, lead, microbiology and mesh. - A TDS and a purchase specification that name the oxide, the grade and the particle size. - An SDS in the 16-section format. - Allergen, GMO, origin and residual-solvent statements; short for an inorganic oxide, but still needed. - The dietary-ingredient or permitted-list basis that the destination requires. - An independent certificate where the buyer's review requires one. Each document should name the lot or point to it. A generic TDS beside a lot certificate is only a matched pair when grade, form and pack line up. ## Checklist before the first order - Is the grade named — supplement, feed, pharmacopoeial or technical — and does the certificate state it? - Does the label name the zinc source as the destination's list names it, and declare the zinc in the required unit? - Do the contaminant figures clear the destination ceiling at the daily dose actually used? - Is the dietary-ingredient or permitted-list basis documented for this form? - Are the pack, the lot code and the retained sample tied to the documents? - Is the source, grade and pack under change control, with a written notice route? Why the grade belongs to the regulatory question is set out on the grades page; the analytical evidence for the grade is on the identity page; the parameters the file has to support are listed on the COA page. The specification itself is on the zinc oxide product page, while the lot file is assembled as described on the quality page. Market notes for the EU and the US gather the instruments. ### 06 How we prove a zinc oxide lot is zinc oxide URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-oxide/identity/ Reviewed: 2026-11-19 A zinc oxide lot is zinc oxide when the document, the IR spectrum, the titration and the XRD pattern all agree. The zinc figure alone cannot establish it: a basic carbonate, a soluble zinc salt, a calcium carbonate dilution and a titanium dioxide blend can each be built to sit near a plausible zinc percentage. The mass balance closes the case, because the formula itself fixes the split at 80.34% zinc and 19.66% oxygen. In one lineZinc oxide is proved by the lattice and the mass balance: IR and XRD name the solid, and the zinc figure has to agree with the oxygen. ## The four identity layers Each row answers one question. A supplier who stops at the first row has shown paper, not powder. Four layers of zinc oxide identity | Check | Question it answers | Method | Evidence it gives | Document | Are the form and grade named? | Name, CAS number, formula, grade statement | Paperwork only | Spectroscopy | Is the solid an oxide? | IR, and XRD where the solid state matters | The lattice, not the purity | Elemental | Is the zinc present in proportion? | Acid dissolution and complexometric titration | The metal content | Mass balance | Is anything else in the drum? | Assay, loss on drying, carbonate and sulfate screens | Consistency of the numbers ## The zinc-to-oxygen ratio Zinc oxide is 1:1 by formula. Zinc is 65.38 g/mol and oxygen 16.00, which fixes the split at 80.34% zinc and 19.66% oxygen, and every legitimate figure follows that ratio. A 99.0% oxide assay corresponds to about 79.5% zinc. A zinc result of 78.0% beside a 99.0% assay does not follow from the arithmetic, so one of the two figures is on a different basis; a zinc result above 80.5% cannot come from pure oxide at all. The ratio is a check on the certificate before it is a check on the powder. If the assay and the zinc figure were produced by two methods on two bases, their ratio will not match the formula, and the discrepancy is arithmetic rather than adulteration. Ask for the calculation and the loss on drying before drawing a conclusion. The same arithmetic catches a blend. An oxide at about 80% zinc can lift a lower-zinc material, and the blend can land inside a range that looks like a single substance. The ratio will not see the second component if it is another zinc salt; the carbonate or sulfate screen will. ## X-ray diffraction and the solid state Zinc oxide crystallises as zincite, a hexagonal wurtzite structure, and its diffraction pattern is distinctive. With copper radiation the strongest reflections sit near 31.8°, 34.4° and 36.3° two-theta, and the peak width gives an estimate of crystallite size. That answers two questions the certificate often leaves open: is the solid crystalline oxide, and is it the same grade as the last lot? XRD also sees phases that a titration cannot. A basic zinc carbonate shows its own reflections, a hydroxide shows another set, and a titanium dioxide dilution shows rutile or anatase. A pattern that matches zincite plus a second phase describes a different material from one that matches zincite alone, even when both titrate to a similar zinc figure. XRD is not a routine release test here. Request it when the grade is disputed, when a new source is qualified, or when the powder behaves differently in acid from the previous lot. Before accepting a “match” statement, ask which reference pattern was used and what the detection limit is. ## What adulteration looks like Substitutions for zinc oxide and the signals they leave | Adulterant | What it does | Signal | Test | Basic zinc carbonate | Dilutes the zinc figure; reacts with acid | Higher ignition loss; carbonate band in IR; CO2 on acid | IR, XRD, ignition loss | Zinc sulfate | Water-soluble; lowers the zinc figure | Soluble fraction; sulfate in a water extract; high loss on drying | Water extraction, sulfate test, LOD | Calcium carbonate | White diluent; lowers the zinc figure | Calcium in the elemental scan; effervescence in acid | ICP-OES, XRD | Titanium dioxide | Matches the whiteness; lowers the zinc figure | Titanium in the elemental scan; rutile or anatase in XRD | ICP-OES, XRD | Zinc stearate | Hydrophobic powder; much lower zinc | Floats on water; carbon-hydrogen bands in IR | IR, water test, titration Whiteness and fineness are the weakest signals: they are easy to reproduce and say nothing about composition. The stronger signals are the mass balance, the acid reaction, the water-soluble fraction and a method that sees the solid state. Appearance and assay alone leave the most likely substitution untested. ## Writing identity into the specification - “Zinc oxide (ZnO), CAS 1314-13-2; the grade is named on the certificate.” - “Identification by IR and by complexometric titration after acid dissolution.” - “Assay ≥99.0% as ZnO; zinc 78.0–80.0% on the dried basis.” - “Loss on drying ≤0.5%; no carbonate or hydroxide above the detection limit.” - “Lead ≤3 mg/kg; the other elements reported per element.” - “Particle size ≥95% through 40 mesh; XRD zincite pattern on request.” ## Five questions to put to a supplier - Which grade is this, and which route and zinc source produced it? - Can you provide the IR spectrum and the acid-dissolution method, not only the assay percentage? - What are the zinc and loss-on-drying results for this lot, and on which basis? - Is a sulfate or carbonate screen available, and what is its detection limit? - If a result is disputed, is a joint re-test on the retain acceptable to you? Those five answers, taken together, make an identity file; one assay line cannot. The product page carries the oxide's specification, and the certificate layout is on the COA page. The grades page explains why the grade belongs to identity, the XRD note covers the detection limit, and the quality page sets out how release is handled. ### 01 Reading a zinc picolinate COA: assay, ligand and zinc URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-picolinate/coa/ Reviewed: 2026-11-19 A zinc picolinate certificate is a test report before it is a purity statement: it names the appearance, the IR and HPLC identity, the HPLC assay, the complexometric zinc result, the moisture, the metal panel, the microbiological counts and the sieve result, and it prints a method and a release gate against each. The catalogue gates are listed in the first table; a lot's measured values belong in the columns beside them. Read the assay and the zinc together, because either one alone leaves the form open. In one lineThe assay says how much zinc picolinate is in the drum; the ligand and the elemental zinc say whether it is zinc picolinate at all. ## The certificate as a test report A stranger should be able to repeat each test from what is written: a method name, a limit and a measured value answer that. A line that offers only a tick or the word “conforms” leaves the buyer trusting a conclusion. On a picolinate lot one pair of lines matters more than the rest. IR and HPLC together say the material is the complex; appearance alone cannot carry an identity claim. The titration adds the metal, and the moisture result says whether the assay is being read on the powder as sold or on its dry matter. Identity, assay, moisture and contaminants · zinc picolinate | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | IR and HPLC | Conforms to the reference | Assay | HPLC | 98.0–102.0% | Zinc (Zn) | Complexometric titration | 20.0–21.5% | Loss on drying | Gravimetric | ≤1.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh Those figures are connected. A change in the assay moves the zinc figure, and a change in moisture moves both if the basis is not printed. Do the arithmetic before booking a test. ## The basis behind the assay and the zinc figure Two quantities sit on the same page: the HPLC assay is a percentage of the complex, the titration a percentage of the element. They cannot be checked against each other until both share a basis, and the basis belongs in the assay row, not a footnote. The formula supplies the expected ratio. Two picolinate ligands at 122.10 g/mol each plus one zinc at 65.38 g/mol give 309.58 g/mol, and 65.38 ÷ 309.58 is 21.12% zinc. A pure complex therefore sits a little above the middle of the 20.0–21.5% catalogue range. The edges of the two ranges touch. At 98.0% assay the zinc figure is 20.7%; at 102.0% it is 21.5%. A pair of results outside that band — a 99% assay with 23% zinc, say — describes a different material, not a bad assay. Basis changes the reading, not the powder. A 99.0% result on the dried basis with 0.4% moisture is 98.6% as-is, and that carries 20.8% zinc; the same 99.0% read as-is carries 20.9%. One decimal is small; building the label and the weigh-up on the other reading is not. ## Release limit versus batch result A gate is not a result, and a result is not a pass. The buyer needs both: the boundary the lot was released against and the value the laboratory found. When the result column simply repeats the range, the document cannot show whether the lot sat at the edge or in the middle, and a trend across lots stays invisible. What the result column should contain | Parameter | Release limit | Result column | Assay | 98.0–102.0% | A measured percentage with its basis and method | Zinc | 20.0–21.5% | A measured percentage consistent with the assay | Loss on drying | ≤1.0% | A measured percentage | Heavy metals | Per element | One figure in mg/kg per element | Microbiology | Counts and absence | The lot's count and its absence statement | Particle size | ≥95% through 40 mesh | The measured through-sieve percentage Microbiology and heavy metals are where a summary hides the evidence. A total for heavy metals conceals which element drove it; an “absent” for microbiology without the count and the test portion conceals the sensitivity. Ask for the per-element figures and the counts. ## What moves between batches Chemistry moves some lines and processing moves others. The reaction and the crystallisation decide where the assay and the zinc land, and the two should travel together. Drying controls moisture. Milling and sieving decide the 40 mesh result, which can shift when the mill is serviced without a single change in the molecule. A lone zinc result is a diagnostic. If the titration rises while the HPLC assay holds steady, some of the metal is arriving from a second source; if it drops, the complex is being diluted or the ligand is running in excess. Repeating the titration on the same sample will not separate those cases; the IR, the XRD screen and the batch record will. Appearance is qualitative, and that is exactly why a shift deserves a question. Off-white covers a wide band, and a cream or grey cast inside it is not proof of a defect. It can follow a hotter drying step, a trace of iron or a longer hold. ## When to order an outside test Four situations justify paying for an outside laboratory: a supplier the buyer has not used, a first shipment into a market with its own enforcement, a label claim about the form that the supplier's sheet cannot support, and any result the buyer disputes. Choose the panel to answer the open question, not to repeat the sheet. IR identifies the complex, HPLC quantifies it, the titration checks the metal, ICP-MS covers the metal panel, and XRD looks for crystalline zinc oxide. If the worry is the ligand, a free picolinic acid result tells the buyer more than a second assay. Every screen needs its detection limit printed. “Not detected” with no limit describes the instrument, not the drum. Keep the sample and the report tied to the lot code, and send the referee the retained sample, the certificate and the specification when a result is contested. ## What to compare between suppliers Six questions reduce most supplier sheets to a fair comparison: what article and CAS; what assay result and on what basis; what zinc result and by which method; what identity evidence; what moisture; and what the contaminant and microbiological figures were for the lot. Two sheets that agree on zinc but not on the assay basis are quoting different powders. Traceability is the second layer. The manufacturer, the picolinic acid source, the drying step and the milling step should be identifiable, and the lot code has to appear on the certificate, the pack and the retained sample. A certificate that is correct but belongs to another drum is still the wrong document. The catalog specification sits on the zinc picolinate product page. The identity page sets out the tests that separate the complex from a blend; the grade page defines the presentations; the HPLC note and the titration note describe the two numbers; release is covered on the quality page. ### 02 Zinc picolinate grades: powder, granulation and the blend question URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-picolinate/grades/ Reviewed: 2026-11-19 Zinc picolinate is a single complex — two picolinate ligands on one zinc — so the usual hydrate menu does not exist here. What the buyer can choose is the physical state of the powder and whether the drum holds that one complex or a mixture with a second zinc source. The zinc figure, the mesh and the label follow from those two choices. In one lineZinc picolinate has no hydrate ladder; the grade choice is the physical form of the powder and whether the drum holds one complex or a blend. ## Why this product has fewer grades Citrate has a dihydrate and an anhydrous salt; sulfate is normally bought as the heptahydrate. For both, the hydrate decides how much zinc sits in a gram before any other question is asked. Picolinate does not work that way. The complex is Zn(picolinate)2, the formula has no water of crystallisation, and the catalogue's 20.0–21.5% zinc sits around the 21.12% the formula predicts. Moisture is capped at 1.0% because the powder picks it up in handling, not because water is part of the crystal. So a grade conversation about picolinate is short. It is about how the powder runs and what else is in the drum. “Zinc picolinate 99%” answers neither question: the number might be the assay, the zinc content, the through-sieve fraction, or a naming convention. ## The presentations side by side Zinc picolinate presentations and the questions each raises | Grade | Zinc figure | What it is | Fits | Watch | Standard powder, 40 mesh | 20.0–21.5% | One complex, milled and sieved | Capsules, tablets, dry blends | Sieve and moisture results for the lot | Granulated | Same as the base powder | Agglomerated for flow and density | Tablets, sachets, high-speed blends | Binder declared; assay re-run after granulation | Oxide blend | Above 21.5% | Picolinate plus zinc oxide | Formulas that need more zinc per gram | Two sources; both belong on the label | A different zinc salt | 12.5–14.0% gluconate; 31.0–32.5% citrate | Another article under a chelate description | Only where that salt is declared | New CAS, new name, new specification Row four is a warning rather than an option. Zinc gluconate and zinc citrate have their own CAS numbers and their own ingredient names, and neither is a grade of the picolinate. A drum sold as “zinc chelate” with no ligand named has not been specified at all. ## Particle size, flow and moisture Mesh is the first lever. The catalogue powder passes 40 mesh at ≥95%, and that single figure hides a distribution: a lot with many fines dusts, wets quickly and can segregate, while a coarse lot flows well and disperses slowly. Ask for the sieve result, not only the pass mark. Granulation is the second lever. It binds the same particles into larger, denser agglomerates, which improves flow on a press or a sachet line. It also introduces a binder and a new mass, so the assay belongs on the granulated powder and the binder belongs in the declaration. Moisture is the third. A 1.0% ceiling is tight, and a powder left open in a humid room can exceed it while the zinc figure still reads normally. Caking and slower flow are the visible signs; the moisture result on the lot is the evidence. ## What changes in the finished product Fill weight follows the zinc figure. At 21% zinc, a 15 mg claim needs about 71 mg of powder; at the low end of the range it needs 75 mg, and at the high end 70 mg. The difference looks small until the capsule is fixed and the excipients are counted. A capsule that holds 70 mg comfortably can be tight at 75 mg. Tablets add compaction. A granulated grade usually runs better at high zinc loads, with fewer fines and less picking, but the lubricant and binder have to be compatible with the label and with the moisture limit. Sticks and drinks are a different problem. The powder is only slightly soluble, so it disperses, and an opaque suspension is the realistic format. A clear beverage is not where this salt starts. Gummies and chews bring water activity and pH into play, and the taste of the zinc has to be worked into the flavour system. ## What to put in the specification - “Zinc picolinate, CAS 17949-65-4, C12H8N2O4Zn; zinc 20.0–21.5% by complexometric titration.” - “HPLC assay 98.0–102.0%, with the basis named.” - “IR and HPLC identification against reference materials.” - “Loss on drying ≤1.0%; ≥95% through 40 mesh; bulk density as measured on the lot.” - “One complex only: no zinc oxide or second zinc source; XRD screen and detection limit if the form is challenged.” - “Granulated: binder named, assay repeated after granulation.” A specification that stops at the zinc range has described a metal content. The clauses above turn it into something a laboratory can release against. ## When not to change grade When the label claim is elemental zinc and the capsule has room, the 40 mesh powder needs no upgrade. Granulation solves a flow problem; it does not improve a blend that already flows. A blend solves a zinc-density problem; it does not belong in a drum whose label names one source. Sometimes the answer is a different salt rather than a different grade. Zinc bisglycinate dissolves, which is why it appears in clear drinks and stick packs; zinc citrate carries 31.0–32.5% zinc and fits a smaller capsule. Moving salt is a new article, and the label, fill weight and stability file move with it. The product hub carries the catalogue specification. The comparison with the glycine chelate is on the picolinate versus bisglycinate page; the certificate fields are on the COA page; the powder's behaviour in a matrix is on the stability page. ### 02.1 Zinc picolinate vs zinc bisglycinate: the ligand, the zinc and the label URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-picolinate/grades/zinc-picolinate-vs-bisglycinate/ Reviewed: 2026-11-19 Both salts are 2:1 zinc chelates, so the difference is not the coordination number but the ligand: picolinic acid is a pyridine carboxylic acid, glycine is an amino acid. In the catalogue the picolinate carries 20.0–21.5% zinc and the bisglycinate 26.0–28.0%, which means about a third more picolinate powder for the same zinc at the midpoints. Solubility, moisture limit and label name all follow the ligand. In one linePicolinate and bisglycinate differ in ligand before they differ in zinc figure; the drum, the fill weight and the label all follow that choice. ## Two ligands, two complexes Zinc is bound twice over in both materials: two ligands, each using a nitrogen and an oxygen. In picolinate the nitrogen belongs to a pyridine ring and the oxygen to a carboxylate on the same ring, so the chelate ring is five-membered and the complex is neutral. In glycine the nitrogen is an amino group and the oxygen a carboxylate on a two-carbon chain. The picolinate formula has no water; the catalogue glycinate is a monohydrate. The ring changes the solid. Aromatic stacking and the flat ligand give the picolinate a different crystal habit, a lower water affinity and a much lower solubility. Glycine is small and polar, and the glycinate goes into water readily. The word chelate is true of both, but the handling consequences are not shared. ## The zinc figure and the fill weight The catalogue ranges translate directly into powder weight. A 15 mg zinc claim takes 70–75 mg of picolinate or 54–58 mg of bisglycinate; at the midpoint that is 72 mg against 56 mg, roughly 30% more powder. Doubling the claim doubles both figures: about 145 mg against 111 mg at 30 mg. Zinc per gram and the powder needed for a 15 mg claim | Zinc source | Zinc in the powder | Zinc per 100 mg | Powder for 15 mg zinc | Zinc picolinate | 20.0–21.5% | 20.0–21.5 mg | 69.8–75.0 mg | Zinc bisglycinate | 26.0–28.0% | 26.0–28.0 mg | 53.6–57.7 mg | Zinc citrate | 31.0–32.5% | 31.0–32.5 mg | 46.2–48.4 mg When the capsule or tablet is already fixed, that difference becomes the constraint. The picolinate may push the fill weight past the tooling or the capsule size, while the glycinate leaves room for excipients. The label still declares elemental zinc; the powder weight is the formulator's problem. ## The label names the ligand The ingredient list has to name the ligand. In the EU, Annex II to Directive 2002/46/EC is a form-specific list: zinc sources are separate entries, “zinc chelate” is not one of them, and the entry that applies is read from the consolidated text in force for the destination. In the US, the Supplement Facts panel declares the element and the ingredient list carries the source, as in “zinc (as zinc picolinate)”. A blend names both. Changing the salt is a labelling event. The specification, the market file, the allergen and origin statements and the stability data all belong to the new article, and a destination file that covers one form does not carry over to the other simply because the zinc figure matches. ## Solubility decides the dosage form Solubility is the practical dividing line. The picolinate is only slightly soluble, which suits capsules, tablets and dry blends and rules out a clear drink at a meaningful dose. The glycinate dissolves, which is why it appears in stick packs, beverages and any format judged on mouthfeel. Acid complicates both. As pH falls, the picolinate's pyridine nitrogen takes a proton and the complex releases zinc, so solubility rises and free zinc brings a metallic note. The glycinate releases zinc too, from a solution that started clear. The taste trial belongs to the matrix, not to the salt name. Gummies and chews add water activity and pH to the decision. A powder that performs in a capsule can cake, migrate or change taste in a chew, and the trial has to be run in the finished matrix. ## Moisture limits and the pack The moisture specifications differ because the solids differ. Picolinate is anhydrous with a 1.0% loss-on-drying ceiling; the catalogue glycinate is a monohydrate with an 8.0% ceiling. The picolinate therefore has almost no headroom for pickup, which is good for a moisture-sensitive matrix and unforgiving of an open liner. The glycinate's crystal water sits inside its specification, so a result close to 8.0% is a lot at the top of its range, not a defect. Both need a sealed pack, a dry store and a study that covers the actual pack and matrix. The picolinate's advantage is not immunity to caking; it is that a moisture problem shows up early. The stability page sets out the protocol. ## When to choose which Pick the picolinate when the label names it, the format is dry, and the fill weight can absorb the extra powder. Pick the bisglycinate when the product is aqueous, the fill weight is tight, or the market file already covers the glycinate. Zinc citrate is the option when zinc per gram is the binding constraint. A switch is a revalidation, not a swap. Fill weight, capsule size, label wording, market file and stability data all move together, and the new article needs its own specification. The zinc picolinate hub carries the catalogue specification, and the zinc bisglycinate hub carries the glycinate figures. The grade page defines the presentations; the compliance page covers the label and market file; the COA page shows how the ligand and the zinc are reported. ### 03 Zinc picolinate stability: moisture, acid and the pack URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-picolinate/stability/ Reviewed: 2026-11-19 Zinc picolinate holds up as a dry powder. The complex is anhydrous, the catalogue caps moisture at 1.0%, and there is no hydrolysis route while the pack stays sealed. The failure modes appear once water or acid enters the picture: a caked powder after an open liner, a dissociated complex in an acidic drink, and a hot-fill step that does in minutes what storage does in months. In one lineThe powder is anhydrous and slightly soluble; moisture and acid are the two variables the pack and the matrix control. ## The powder after the liner is opened The 25 kg drum with its liner sealed is a stable package. Open it and the clock starts: the powder is hygroscopic enough that repeated draws in a humid room raise the moisture, and once moisture climbs the powder cakes and flows badly. The assay may not move at all, which is why moisture deserves a check during production as well as at release. Handling is simple. Reseal the liner, keep the drum in a dry store, and add a desiccant to the outer pack for a humid destination. A tint after storage is a prompt to test moisture and metals, not a verdict on its own. ## In a dispersion and in the matrix Water is not a good solvent for this salt. A 5% dispersion is a suspension; the solids settle and the liquid stays cloudy. In an acidic matrix the complex also dissociates, because the pyridine nitrogen protonates as the pH falls and the ligand lets go of the zinc. Solubility rises, and free zinc reaches the taste buds. For a liquid that leaves three practical routes: an opaque suspension with a controlled settling rate, a more soluble salt, or a low dose in a matrix that tolerates the taste. Whichever is chosen, the pH and the preservative system need a bench trial, and the hold time needs validation. Heat compounds the acid effect. A hot fill holds the dispersion at a temperature the powder never sees in storage, and dissociation plus a colour change can follow. Add the powder after the mix has cooled, or shorten the hold and validate it. ## What moves the result Stability factors · zinc picolinate in storage and in formula | Factor | What shifts | What to do | Moisture pickup | Loss on drying rises, caking, slower flow | Reseal the liner; dry store; desiccant | Low pH | Complex dissociates, free zinc, metallic taste | Raise the pH; add the powder late; trial the taste | Hot fill | Faster dissociation and a colour shift | Cool before the addition | Mineral premix | Ligand competition; haze or colour drift | Trial the whole premix | Gummy water activity | Moisture migration; taste drift | Control water activity; barrier pack | Packaging | Water vapour or odour transfer | Foil laminate for sticks; sealed liner for drums ## The stability protocol Two studies, not one. The bulk study puts the commercial pack in 25 °C/60% RH and 40 °C/75% RH and pulls at 0, 3, 6, 12 and 24 months for assay, zinc, moisture, appearance, sieve and microbiology. The accelerated chamber is a predictor; the labelled storage condition is the one that governs. The finished form gets a second study: capsules, tablets, sticks or gummies at 30 °C/65% RH and 40 °C/75% RH, testing zinc, moisture, colour, taste and disintegration where it applies. A bulk lot can pass and the gummy still fail, because the matrix is holding water against the powder. ## Formulation and packaging Capsules and tablets protect the powder from the air, so the excipient list becomes the main risk. A hygroscopic excipient draws moisture toward the picolinate, and a lubricant that carries water is the wrong choice. A blister or a tight high-density polyethylene bottle with a desiccant is a reasonable default. Sticks need a laminate with a low moisture-vapour transmission rate; a paper structure is a design decision that needs data. Gummies and chews are decided by sugar system, water activity and pH, and an acidulant can dissociate part of the complex. A drink is decided by pH and preservation before the grade matters. The grade page covers the alternatives, and the zinc bisglycinate line is the soluble route for a clear system. ## Where the shelf life comes from No catalogue number can stand in for a shelf life. The date belongs to a pack, a matrix and a climate, and a technical sheet should say which storage condition it assumes and whether the date is a bulk retest period or a consumer expiry. If the study does not cover the pack or the matrix, the defensible answer is a shorter date, not an extrapolation. The parameters to track are already on the certificate. The COA page lists them, the quality page explains the lot record, and the loss-on-drying entry covers the moisture method. The catalogue specification is on the zinc picolinate product page, and the packs are described on the ordering page. ### 04 Zinc picolinate MOQ: the 1 kg pouch, the drum and the lead time URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-picolinate/moq/ Reviewed: 2026-11-19 Zinc picolinate ships from a single kilogram, and that kilogram is a released lot in a sealed foil pouch with its own certificate. Volume orders move to the 25 kg fiber drum. Once the article, quantity, pack and destination paperwork are settled, dispatch is quoted at one to seven days. In one lineThe 1 kg pouch exists so a trial is a traced lot rather than a scoop from a drum. ## Why the minimum is one kilogram A kilogram is enough to run a formulation trial, a short stability pilot or a small batch, and it comes with a lot number and a certificate. That is the point of the minimum: the buyer tests the material that will be produced, not a hand sample from an open drum. The pack is also the unit of documentation. One kilogram can be labelled, sealed, shipped and traced on its own; a scoop cannot. If the order grows, the packer keeps the lot where the lot size allows and issues a new certificate when it does not. Name the article precisely in the first message. The catalogue line is zinc picolinate, CAS 17949-65-4, 20.0–21.5% zinc. A request for “zinc picolinate 99%” leaves the assay, the mesh and the zinc figure ambiguous, and the fill weight depends on the answer. ## Packaging Standard packs · zinc picolinate | Pack | Use | Notes | 1 kg foil pouch | Trials, bench work, sample retention | Food-grade liner, heat-sealed, lot label on the pouch | 25 kg fiber drum | Production | Food-grade liner, sealed, tamper-evident closure | Pallet | Bulk dispatch | Stretch-wrapped, lot labels readable Pack and liner are one specification. A drum whose liner was left unsealed has been stored under conditions the study did not cover, and nothing on the certificate records that difference. A humid destination is a reason to specify a desiccant. Every pack should carry the article, lot, certificate reference, net weight and storage condition. The lot number is the link between the pack, the certificate, the retained sample and the stability file; without it the chain is broken. ## Lead time One to seven days is the indicative dispatch window after the order is confirmed. The clock starts when article, quantity, pack and documents are agreed, and an enquiry against an open specification does not start it. Granulation, an outside test and destination paperwork — a certificate of origin or a translated label, for example — each add days. Each can be quoted with its own added days if it is raised at the start. ## What the quotation needs - Article: zinc picolinate, CAS 17949-65-4, and the agreed zinc range. - A first quantity and an annual estimate. - Dosage form: capsule, tablet, stick pack or dry blend. - Mesh and bulk density the line can run. - Destination country and the documents it needs. - Required arrival date. A certificate from another supplier is a useful starting document, because it shows the methods and limits the quality team already works to. A counter-specification can then state what is matched and what is not. Packing, freight and paperwork follow the destination, so the commercial terms are built on the confirmed order. ## Samples Samples are drawn from a released lot and sent with the certificate for that lot; the quantity is agreed at enquiry. Without the certificate the trial cannot be repeated or tied to a lot record. Request the presentation that will ship — a 40 mesh powder does not represent a granulated grade. If the sample is for a process variant, ask for that variant. If it is for supplier qualification, ask for the certificate and the retained-sample reference with it. Freight and documents are confirmed with the request. ## Payment and terms The order confirmation fixes payment terms, Incoterm and the document list. They vary with destination, order size and whether the account is new, which is why they are quoted rather than published. A claim is settled against the retained sample and the lot's certificate. If a pack arrives damaged or the article is not what was ordered, photograph the carton and lot label and tell us before the material is used. The COA page sets out the certificate fields; the grade page covers the presentation and blend decision; the compliance page lists the documents a destination may ask for; the quality page explains the lot record and the retained sample. The product line is on the zinc picolinate hub. ### 05 Zinc picolinate: the form, the contaminant limits and the label URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-picolinate/compliance/ Reviewed: 2026-11-19 Zinc picolinate raises four separate questions in any market: whether the form may be used, what contaminant ceiling applies at the dose, how the label must name the source and the zinc, and what may be claimed. The buyer's regulatory team owns the answer for the destination; this page sets out the frameworks and the documents that support the file. The catalogue gates are lead 3, arsenic 2, cadmium 1 and mercury 0.1 mg/kg. In one lineA picolinate certificate proves a lot; it does not prove that the form, the dose and the label are lawful where the product is sold. ## The four checks The four questions get mixed together because they arrive in one email. They are answered by different instruments. A permitted-form list decides whether the substance may be used at all. A contaminant regulation sets a ceiling for the finished product. Labelling rules govern the panel and the warnings. Claims law governs the sentence under the logo. They also fail separately. A form accepted in one country can be unlisted in the next; a ceiling written for the finished product is not a raw-material limit; and a US structure/function statement does not become an authorised EU claim. A mineral salt can also reach the market as a food additive or a fortified-food ingredient, on a different list with different conditions, and the routes do not substitute for one another. ## European Union Directive 2002/46/EC lists the vitamin and mineral substances, and the forms of them, that may be used in food supplements in the EU; the list sits in Annex II and is amended by Commission regulation. The form-specific question is whether the entry for the exact zinc source covers the intended use, and it is answered by the consolidated text in force on the day of sale, not by a supplier's assurance. Zinc labelling uses a reference intake of 10 mg/day under Regulation (EU) No 1169/2011, and the tolerable upper intake for adults is 25 mg/day as of this review. The upper figure is a ceiling for the daily portion, not a target. The supplement particulars — the words food supplement, the daily portion, the over-dose warning, the varied-diet statement and the keep-out-of-reach warning — come from the same directive, and the percentage NRV is calculated on elemental zinc. Contaminants are governed by Regulation (EU) 2023/915. National notification and national maximum levels still vary, so the destination country is part of the brief, not a shipping detail. ## United States The US starts from a different question: whether this exact form is a lawful dietary ingredient. Section 201(ff) of the Federal Food, Drug and Cosmetic Act, as amended by DSHEA, offers three bases — a new dietary ingredient notification at least 75 days before marketing, a GRAS conclusion, or evidence of marketing as a dietary supplement before 15 October 1994. The supplier should be able to name the basis and produce the file behind it; the fact that zinc is an essential nutrient supplies none of the three. The Supplement Facts panel declares elemental zinc, the source is named in the ingredient list, and the Daily Value for adults and children four and older is 11 mg under 21 CFR 101.36. The cGMP in 21 CFR 111 requires identity testing of each component on receipt, so the buyer's own test is part of the record. A structure/function statement has to be truthful, substantiated and disclaimed, and the FDA must be notified within 30 days of first marketing; a disease claim has no route at all. No federal limit covers heavy metals in supplements generally. California's Proposition 65 is the exposure framework many brands use: 0.5 µg/day for lead and a 15 µg/day no-significant-risk level. The calculation runs from the daily dose, which a mg/kg figure alone cannot answer. ## The contaminant table Contaminant limits · catalogue specification and market ceilings | Contaminant | Catalogue limit | EU supplement ceiling | US federal | UK | Lead | ≤3 mg/kg | 3.0 mg/kg | No general limit | 3.0 mg/kg | Arsenic | ≤2 mg/kg | No harmonised limit | No general limit | No harmonised limit | Cadmium | ≤1 mg/kg | 1.0 mg/kg (3.0 for seaweed or bivalve products) | No general limit | 1.0 mg/kg | Mercury | ≤0.1 mg/kg | 0.10 mg/kg | No general limit | 0.10 mg/kg The EU and UK figures apply to the supplement as sold. The catalogue figure applies to the drum. Converting one into the other needs the daily dose and the ingredient's share of the formula. Arsenic is the line to watch: 2 mg/kg is a customer limit because the EU has no general maximum for it in supplements. The UK column reflects the retained law as of this review; the current GB text governs. ## Claims and label wording A disease claim is out of bounds in both markets. In the EU the only route is the authorised list under Regulation (EC) No 1924/2006 and Regulation (EU) No 432/2012, with the conditions attached to the wording. In the US the brand writes and substantiates a structure/function statement and attaches the DSHEA disclaimer. Saying that the lot is zinc picolinate is a statement of identity rather than a health claim, and it still has to be true on the COA. “Chelated” is chemistry, not a permitted claim. ## The document pack Documents a brand should hold for a zinc picolinate lot | Document | What it establishes | Issued by | Specification | The article and limits agreed | Buyer and supplier | Lot COA | The results for the lot | Manufacturer | SDS | Handling and hazard data | Manufacturer | Identity records | IR, HPLC and zinc for the lot | Manufacturer or laboratory | Contaminant results | Metals and microbiology | Manufacturer or laboratory | Allergen, GMO, origin statements | Declarable inputs and status | Manufacturer | Packaging declaration | Food-contact suitability | Pack supplier | Label artwork | Source, zinc amount, warnings | Brand Each document should carry or point to the lot code. A generic TDS paired with a lot COA is not a matched set unless article, grade and pack agree. ## What to check before the first order Market file checklist · zinc picolinate | Check | Evidence | Red flag | Form permitted | Entry for the exact source in the current list | “Zinc” or “chelate” with no source | Contaminants | Results against the ceiling at the daily dose | A drum limit pasted onto the finished product | Label source | Ingredient list names zinc picolinate | A different salt or an undeclared blend | Zinc declared | mg and % NRV or % DV per portion | Powder weight presented as zinc | Claims | Authorised wording, or a structure/function statement with its disclaimer | Wording that promises a disease outcome | Documents | Lot code on every file | Generic papers with no lot link The COA page shows how the results are laid out, and the identity page covers the tests that separate the complex from a blend. The EU and US notes expand each market, the quality page explains how the lot file is assembled, and the zinc picolinate hub carries the catalogue specification. ### 06 How we prove a zinc picolinate lot is the picolinate URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-picolinate/identity/ Reviewed: 2026-11-19 Four measurements have to agree before a zinc picolinate lot is identified: the IR spectrum of the complex, the HPLC assay, the complexometric zinc result and the mass balance between them. A zinc figure on its own fits several salts, and a ligand figure on its own fits added picolinic acid. The 2:1 ligand-to-zinc ratio is what forces the two figures to describe the same molecule. In one lineZinc picolinate is proved by agreement: the spectrum, the ligand assay, the zinc titration and the 2:1 ratio have to tell the same story. ## Identity in layers Each test answers a narrower question than the one before it. Appearance and solubility only establish that the powder could be the right material. IR establishes that the picolinate is coordinated to a metal. HPLC measures how much of the complex is present. The titration measures the metal, and the arithmetic between the two is the only step that tests whether ligand and metal belong together. XRD adds a check for a crystalline second phase. Identity layers · what each test answers | Layer | Test | Question answered | Target | Appearance, solubility | Visual; water dispersion | Could this be the material? | White to off-white; only slightly soluble | Complex identity | IR | Is the picolinate coordinated? | Matches the reference | Assay | HPLC | How much complex is present? | 98.0–102.0% | Metal | Complexometric titration | How much zinc is present? | 20.0–21.5% | Mass balance | Calculation | Do ligand and metal agree? | 2.00 mol ligand per mol zinc | Second phase | XRD | Is crystalline zinc oxide present? | None above the detection limit A disputed lot is worked in that order, because the calculation is free and it often shows which instrument is needed next. Repeating a test that has already passed adds precision, not evidence. ## The 2:1 ratio and the mass balance The molar arithmetic is fixed by the formula. Picolinate is 122.10 g/mol, zinc is 65.38 g/mol, and 2 × 122.10 + 65.38 = 309.58 g/mol, which is 21.12% zinc. If a laboratory reports the ligand as free picolinic acid at 123.11 g/mol, the moles are the same and the ratio is unchanged. To check a lot, convert both results to moles and divide. A true complex returns 2.00. A ratio of 2.20 carries more ligand than the formula allows, which suggests added picolinic acid; 1.70 leaves metal in excess of the ligand, which suggests a second zinc source. Both numbers say more than a second assay would. The basis has to match. A ligand result on the dried basis divided by a zinc result as-is produces a ratio that belongs to neither. And total ligand includes free ligand, so a free picolinic acid figure belongs beside the ratio rather than in a footnote. A worked case: a 99.0% assay implies 20.9% zinc. A titration of 20.9% closes the balance. A titration of 24.0% means roughly one zinc in eight comes from elsewhere, and a titration of 18.0% means dilution or excess ligand. The arithmetic decides which test is worth ordering. ## What XRD sees, and what it misses Zinc oxide is the common second source, and it is crystalline, so XRD is the direct screen. The picolinate gives a distinct pattern, and zincite reflections stand out when oxide is present. The detection limit on the report is part of the evidence; a “none detected” without a limit is a statement about the instrument. The method has limits of its own. Amorphous material and dissolved species produce no reflections, and a blend below the detection limit is invisible. That is why XRD sits beside IR and the mass balance rather than replacing them. A clean IR with a 24% zinc figure still describes a blend. ## Adulteration signals What a result pattern suggests, and how to confirm it | Signal | Likely cause | Next test | Zinc above 21.5%, assay near 100% | Zinc oxide addition | XRD and IR | Zinc near 21%, sulfate present | Zinc sulfate heptahydrate, about 22.7% zinc | Sulfate test or ion chromatography | Ligand high, zinc low | Free picolinic acid | Free-acid HPLC | Assay and zinc low, moisture high | Dilution or water uptake | Moisture and mass balance | Zinc in range, IR mismatch | A different zinc salt | IR reference and HPLC Zinc sulfate heptahydrate is the hardest case to see: 22.7% zinc sits close enough to the picolinate range that the titration alone will not catch it. A sulfate test or ion chromatography will, and the moisture result should sit well above the 1.0% ceiling if the heptahydrate is a large share. Zinc gluconate at 12.5–14.0% and zinc citrate at 31.0–32.5% are further away and easier to spot in the arithmetic. ## What to write into the specification - “Zinc picolinate, CAS 17949-65-4, C12H8N2O4Zn; HPLC assay 98.0–102.0% with the basis stated.” - “Zinc 20.0–21.5% by complexometric titration, on the same basis as the assay.” - “IR and HPLC identity against reference materials.” - “Loss on drying ≤1.0%; no water of crystallisation in the formula.” - “No second zinc source; XRD screen with its detection limit on request.” - “Free picolinic acid reported where the ligand figure exceeds the balance.” The clauses do the work a zinc range cannot: they define an article rather than a metal content. ## Questions to put to the supplier - Is this one complex or a blend? If a blend, which zinc sources are present and in what share? - What are this lot's assay and zinc results, and on what basis was each reported? - Does the IR report compare against a reference spectrum, and which bands were used? - Has zinc oxide been screened by XRD, and what detection limit is quoted? - Is free picolinic acid reported, and does the ligand close against the zinc? Five answers of that kind form a specification. A single zinc percentage does not. The product hub carries the catalogue specification, and the COA page shows how the results are laid out. The picolinate versus bisglycinate page covers the ligand comparison; the XRD note explains what a detection limit means, and the FTIR note covers the coordination spectrum. The full method list is on the methods index, and the release workflow is on the quality page. ### 01 What the COA for copper gluconate actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/copper-gluconate/coa/ Reviewed: 2026-11-19 The certificate for a copper gluconate lot reports appearance, identification by infrared spectrum and titration, the salt assay by complexometric titration, elemental copper, water by Karl Fischer, the heavy-metal panel, microbiology and particle size. Each line needs the method, the release limit and the measured result. The limits below are the catalog specification; the batch COA is what confirms a particular pack. In one lineCopper gluconate is audited on two figures at once: the salt assay and the elemental copper, with the gluconate identity and the water result beside them. ## Reading the certificate A certificate is only as good as the trail it leaves: each line should stand on its own. Every parameter should show the measurement, the method behind it and the limit used at release. A row that says only “conforms” asks for trust without showing the evidence. Identity, assay, water and contaminants · copper gluconate | Parameter | Method | Release limit | Appearance | Visual | Blue-green, free-flowing powder | Identification | Infrared spectrum and titration | Conforms to the reference | Assay (copper gluconate) | Complexometric titration | 98.0–102.0% | Copper (Cu) | Complexometric titration or ICP-OES | 13.5–14.5% | Water | Karl Fischer | ≤1.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh ## Assay, copper and the water between them Copper gluconate is C12H22CuO14, with a molar mass of about 453.84 g/mol. Copper accounts for 63.55 of that mass, so the theoretical copper content is 63.55 ÷ 453.84 = 14.0%. The reciprocal, 7.14, converts a copper result into salt: a measured 14.0% Cu corresponds to about 100% copper gluconate, and the catalog range of 13.5–14.5% corresponds to about 96.4–103.6% salt. That arithmetic is the first audit check. If a certificate reports an assay of 101.0% and a copper result of 12.0%, the pair cannot both describe the same powder: 12.0% × 7.14 = 85.7% salt, not 101%. The two figures should be consistent through that factor; a large mismatch is a question for the laboratory. Ask which result was measured and which was calculated. The water result is the second check. The catalog allows ≤1.0% by Karl Fischer. With that ceiling the difference between an as-is and a dried basis is at most about one percentage point, but it is not zero, and the certificate should name the basis it used. The identity row has two halves. The infrared spectrum shows the gluconate ligand; the titration shows copper. A copper reaction on its own would also be positive for copper sulfate or copper oxide, so the ligand evidence is what makes the salt name defensible. The certificate should name the reference spectrum it was compared with. ## Release limit versus batch result The limit is the acceptance boundary; the result is the number the laboratory obtained. They belong in separate columns, with the method alongside. If the result column simply repeats the range, it records the gate rather than the measurement. The result column, line by line | Parameter | Release limit | Result column | Assay | 98.0–102.0% | A measured percentage, with the basis named | Copper | 13.5–14.5% | A measured percentage, with the method named | Water | ≤1.0% | A measured percentage | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot | Particle size | ≥95% through 40 mesh | The measured percentage through the sieve “Passes specification” is a verdict, and the reader should be able to reconstruct it from the figures. Heavy metals need a number for each element rather than one total. Microbiology needs a count, an absence statement and the sample size. “Heavy metals: passed” does not say which element was tested or against what limit. ## What moves between batches Crystallisation and drying move the assay and the copper figure together, because the assay is normally calculated from the copper titration. A lot that is low on both is a lower-purity or diluted salt. A large mismatch between the two figures points to a calculation or basis error, not to a second component. Water moves with the drying step and the pack. Copper gluconate is hygroscopic, and a drum that has been opened repeatedly can gain moisture after release; the powder may cake and the blue-green colour may darken or fade. That is a storage change rather than a manufacturing defect, but it is a reason to keep the original pack closed and to record the date of opening. Particle size moves with the mill and the sieve. The 40 mesh line is set at finishing, so a mill or sieve change can move it while the chemistry stays the same. Colour is the least quantitative line: blue-green covers a range, and moisture or a hot drying step can shift it while the assay remains inside the window. ## When to order an outside test An outside test is worth ordering for a new source, a first regulated shipment, an identity claim the certificate does not establish, or a result in dispute. The useful panel is targeted, not a full repeat of the certificate: complexometric titration for the assay and copper, ICP-OES for copper, Karl Fischer for water, ICP-MS for the heavy-metal panel, microbiology, and an infrared spectrum against a gluconate reference. Add X-ray diffraction if a crystalline copper salt such as sulfate or oxide is suspected, a sulfate test if the copper figure is high, and a glucose or maltodextrin screen if the assay and copper are both low. Require the detection limit for every screen. Without a limit, “not detected” describes the method, not the powder. Chain of custody matters. The tested sample and the retained sample should be the same, and the report should carry the lot code. For a contested result, send the referee the retained sample, the certificate and the specification, and ask for the discriminating tests rather than another assay. ## What to compare between suppliers Compare six lines: the salt name and CAS number; the assay with its basis; the copper result and the method; the identity tests with the reference named; water; and the contaminant, microbiology and particle-size results. Two quotations that agree on copper but differ on the ligand evidence or the basis are not describing the same powder. Traceability is the next layer: the manufacturer, the copper source, the drying step and the link between the certificate and the pack. The catalog specification is on the copper gluconate product page. The identity page shows the tests that separate the salt from other copper sources; the compliance page covers the market conditions; the complexometric method note describes the titration; the ICP-MS note covers the heavy-metal panel; the quality page sets out the release workflow. ### 02 Copper gluconate grades: mesh, flow and the fill URL: https://nutrition.rainwoodbio.com/products/minerals/copper-gluconate/grades/ Reviewed: 2026-11-19 Copper gluconate is supplied as a blue-green powder, typically ≥95% through 40 mesh, with a granulated form available on request. The grade decision is physical — particle size, flow and blend behaviour — because the copper figure is fixed by the salt at about 14.0%. A product that changes that copper figure is not another grade of the same salt; it is a different material or a dilution. In one lineThe grade of copper gluconate is a physical decision — mesh, flow and blendability — because the copper figure is set by the salt at about 14%. ## Three meanings of “grade” Buyers use the word grade for three different things: a particle size, an assay level, and a chemical form. For copper gluconate the catalog material is one chemical entity, C12H22CuO14, CAS 527-09-3, with copper at 13.5–14.5%. The variables that can be changed without changing the molecule are the mesh, the flow and the carrier. Copper bisglycinate is not a grade of copper gluconate. It is a different molecule with a different CAS number, copper figure and label name. The comparison belongs on the level-four page, not in a particle-size table. A diluted blend is a third case. If copper gluconate is plated onto a carrier to make a low-dose premix, the copper figure falls in proportion to the dilution, the carrier must be declared, and the specification is no longer the catalog one. That is a project-specific material, not a grade. ## The catalog form and its neighbours Copper gluconate forms and the adjacent materials | Material | Copper figure | Flow and dust | Typical use | What changes | Catalog powder, 40 mesh | 13.5–14.5% | Free-flowing; some dust | Capsules, tablets, powder blends | The baseline specification | Granulated powder | 13.5–14.5% | Coarser; less dust | High-speed blending, tableting | Mesh, flow and dissolution rate | Diluted blend, project-specific | Lower, by calculation | Carrier-dependent | Low-dose premix | Carrier, label, assay and dose | Copper bisglycinate, different form | About 30.0%, calculated | Chelate powder | Dry blends | Identity, CAS, label and fill The first two rows are the catalog form and its granulated option. The third is a different specification that should be quoted and labelled as such. The fourth is not a grade at all; it is a separate ingredient with its own certificate. ## Mesh, flow and the process 40 mesh is about 420 µm, and the catalog requires at least 95% through that sieve. A finer powder dissolves and disperses faster, but it generates dust and can segregate in a blend. A granule flows better, fills a tablet die more evenly and produces less dust, but it may dissolve more slowly. The right choice depends on the process, not on a preference for coarse or fine. Copper gluconate is hygroscopic. A powder stored in an open container can cake and change colour, and a granulated product can lose its flow if it picks up water. Pack and storage are part of the grade in practice, even when the mesh line does not say so. Bulk density and flow are not in the catalog specification. If the process needs a target, ask for it to be measured and written into the purchase specification. A mesh figure alone does not describe how a powder will run on a particular line. ## The copper figure and the fill Copper is declared in milligrams, and the salt mass is the internal number. At the theoretical 14.0%, 1 mg of copper needs 7.14 mg of copper gluconate; 2 mg needs 14.3 mg; 3 mg needs 21.4 mg. At the bottom of the catalog range, 13.5%, the same 2 mg claim needs 14.8 mg, and at 14.5% it needs 13.8 mg. Salt mass for a copper claim across the catalog range | Label claim (Cu) | At 13.5% Cu | At 14.0% Cu | At 14.5% Cu | 1 mg | 7.41 mg | 7.14 mg | 6.90 mg | 2 mg | 14.8 mg | 14.3 mg | 13.8 mg | 3 mg | 22.2 mg | 21.4 mg | 20.7 mg A 2 mg claim uses about 14 mg of salt in a capsule that may weigh 300–500 mg. The salt is a small part of the fill, so the practical problem is uniformity, not capacity: the powder has to be diluted into a premix that can be weighed and blended evenly. A tablet at the same claim needs a comparable premix and a granule that compresses without segregation. The table is arithmetic, not a dosing instruction. The label claim belongs to the brand and its regulatory reviewer. Granulation does not change the copper figure; it changes how the powder moves, and a granulated grade still needs the same 7.14 mg per milligram of copper. ## What to write into the specification - “Copper gluconate, CAS 527-09-3, C12H22CuO14, copper 13.5–14.5%.” - “Assay 98.0–102.0% by EDTA titration; state the basis.” - “Water ≤1.0% by Karl Fischer; appearance blue-green and free-flowing.” - “Identification by infrared spectrum against a reference and by titration.” - “Particle size ≥95% through 40 mesh; a granulated grade with its own mesh and flow target.” - “Heavy metals and microbiology as listed; pack, lot code and destination market.” A granulated grade needs its own mesh and flow lines in the specification. A diluted blend needs the carrier, the copper figure and the label name; it is not covered by the catalog specification. Write the grade and the form into the purchase order, not only the product name. ## When a different grade is the wrong choice Granulation is the wrong choice when the process needs fast dissolution or a suspendible powder; a granule can take longer to dissolve and may leave a gritty texture. It is also the wrong choice when the existing powder already flows well enough and the change would force a new specification for no process gain. Do not use a diluted blend when the label names copper gluconate and the carrier is undeclared. The label ingredient is the salt, and a carrier is a separate ingredient with its own declaration. Do not order copper gluconate as a substitute for copper bisglycinate: the copper figure is about half, so an equal weight delivers less copper, and the label name is different. The level-four comparison covers that switch. The product hub has the catalog specification. The identity page shows how the salt is proved; the COA page shows how the figures are reported; zinc gluconate and manganese gluconate show the same gluconate arithmetic with a different metal; the methods library covers the titration and the sieve test; the quality page covers release. ### 02.1 Copper gluconate vs copper bisglycinate: the salt, the copper and the fill URL: https://nutrition.rainwoodbio.com/products/minerals/copper-gluconate/grades/copper-gluconate-vs-bisglycinate/ Reviewed: 2026-11-19 Copper gluconate and copper bisglycinate are both copper(II) sources, but they are different molecules: the gluconate is an ionic salt carrying about 14.0% copper, and the bisglycinate is a chelate carrying about 30.0% copper by calculation. A switch at the same powder weight changes the copper delivered, the capsule fill, the assay calculation and the ingredient line. The two are not interchangeable at equal weight. In one lineGluconate carries about 14% copper and bisglycinate about 30%, so a switch changes the fill, the assay and the ingredient line rather than only the powder. ## A salt and a chelate Copper gluconate is the copper(II) salt of gluconic acid: one copper ion and two gluconate anions, C12H22CuO14, molar mass about 453.84 g/mol, CAS 527-09-3. The gluconate is an ionic salt, not a chelate. Copper bisglycinate is a chelate: a copper ion bound by two glycine ligands, each using its amino nitrogen and a carboxylate oxygen, C4H8CuN2O4, molar mass about 211.66 g/mol, CAS 13479-54-4. Chelate names the ring; it is not a grade or a potency measure. The gluconate does not become a chelate by being blended or granulated, and the bisglycinate is not a gluconate with more copper. Each has its own identity tests, specification and label name. The 30.0% figure for the chelate is a calculation from the anhydrous formula. A commercial grade is specified on its own certificate, and its copper figure may be lower if the solid is a hydrate or is carried on a diluent. The comparison below uses the theoretical figures to show the arithmetic; the supplier's certificate is the figure that counts for a purchase. ## The copper figure and the mass Copper content and salt mass for the same copper | Source | Copper, theoretical | Salt for 1 mg Cu | Copper in 100 mg powder | Copper gluconate | 14.0% (catalog 13.5–14.5%) | 7.14 mg | 13.5–14.5 mg | Copper bisglycinate | 30.0% (anhydrous calculation) | 3.33 mg | 30.0 mg The gluconate needs about 2.1 times the mass for the same copper. At the bottom of the gluconate range the factor is 7.41, and at the top it is 6.90; the catalog range moves the salt mass by about 7% from low to high. Those are small differences next to the gap between the salt and the chelate. ## What it does to the fill Salt mass for a copper claim at the theoretical figures | Claim | Copper gluconate at 14.0% | Copper bisglycinate at 30.0% | Mass difference | 1 mg Cu | 7.14 mg | 3.33 mg | 3.81 mg | 2 mg Cu | 14.3 mg | 6.67 mg | 7.62 mg | 3 mg Cu | 21.4 mg | 10.0 mg | 11.4 mg Both masses are small compared with a 300–500 mg capsule. The practical difference is not fill capacity; it is premix design. A 2 mg copper claim uses about 14 mg of gluconate or 7 mg of chelate, and either one has to be diluted into a carrier that can be blended uniformly. The chelate leaves more room for other actives at a fixed fill, but the label claim is a decision for the brand and its regulatory reviewer, not a reason to increase the dose. A tablet at the same claim needs a compressible premix and a granule that does not segregate. The salt's higher mass per milligram of copper may help uniformity at a very low dose, because it is easier to weigh; the chelate's lower mass can be an advantage when the fill is tight. Neither point is a health claim. ## Solubility and the matrix The catalog describes copper gluconate as freely soluble in water, giving a blue-green, slightly acidic solution. That makes the salt the easier starting point for a stick pack, a drink mix or a liquid, provided the solution stability questions are answered: copper is redox-active, an alkaline pH can precipitate copper hydroxide, and dissolved gluconate supports microbial growth. The chelate is handled as a solid for capsules and tablets. Its solubility is a specification item to confirm with the supplier; do not assume it dissolves like the salt because the word appears on a label. A dry blend, a tablet or a capsule is the natural format for a chelate; an aqueous system needs its own solubility and stability work. Both are solids that need a sealed pack. Copper gluconate is hygroscopic, and the chelate's storage conditions belong on its technical data sheet. The pack, not the molecule alone, decides the shelf life; the stability page sets out the protocol. ## The label and the regulatory file The label declares elemental copper, not the salt. The ingredient list names the source: “copper (as copper gluconate)” or “copper (as copper bisglycinate)”. A switch changes that line, the specification, the certificate and often the fill weight. The salt mass is an internal number used to hit the declared copper figure. The EU, US and UK routes are separate, and the buyer's regulatory team confirms the permitted form, the label particulars and the claim wording for the destination. A raw-material page cannot approve a label. The name on the label must match the material in the drum; a certificate for one source does not cover the other. ## When to choose which Choose copper gluconate when the label names it, when the matrix is aqueous, and when the fill can carry about 7.1 mg of salt per milligram of copper. The chelate fits when the label names it, the blend is dry and the smaller mass leaves room in the fill. Choose neither when the label names a different copper source; copper oxide and copper sulfate are different materials with different copper figures and different uses. The decision is a fit between the label, the fill and the matrix; it is not a ranking of the molecules. Switching source changes the specification, the identity test, the label and often the capsule size. It should go through change control, not a substitution at the same weight. The product hub has the catalog specification; the grades page puts this comparison in the wider range; the identity page shows how the salt is proved; zinc gluconate and manganese gluconate run the same salt-versus-chelate arithmetic with a different metal; the methods library covers the assay; the quality page covers release. ### 03 Copper gluconate stability: moisture, solution and the pack URL: https://nutrition.rainwoodbio.com/products/minerals/copper-gluconate/stability/ Reviewed: 2026-11-19 Copper gluconate is hygroscopic and freely water-soluble. Kept dry and sealed, the salt is stable; moisture pickup is the usual reason a lot changes, because it raises the Karl Fischer figure, can cake the powder and dull or darken the blue-green colour. A solution is the weakest format: copper is redox-active, and dissolved gluconate feeds microbial growth. In one lineThe dry salt is the stable form; moisture, heat and an aqueous matrix are what change the powder, the colour and the assay. ## The powder: water, colour and flow The specification caps water at ≤1.0% by Karl Fischer. That is a release limit, not a licence to store the powder in humid air. An opened pouch or drum takes water from the room; the powder may cake, lose flow and shift colour. Keep the original pack closed and the store dry. Colour comes from the copper(II) centre. Heat and moisture can change the shade, so a discoloured sample should be re-tested rather than judged by eye. Light matters less, but an opaque or foil pack remains the sensible default; a clear jar is not a storage container. Temperature acts through moisture. A hot bay or a warm store speeds water pickup and colour change. Bring a cold pack back to room temperature before opening it, otherwise condensation forms on the powder. ## The solution: the fragile format Copper gluconate gives a blue-green, slightly acidic solution. Once dissolved, several risks arrive together. Copper(II) can catalyse the oxidation of ascorbic acid, fats and flavours, which shows up as colour, odour or assay change in the matrix even when the copper figure holds. An alkaline pH can drop copper hydroxide, and the gluconate can support microbes. Copper at a nutrient level does not preserve a solution. Gluconate is a carbon source, so a held solution needs a preservative system or a validated sterile process. A clear bottle on a bench is an exposure, not a stability trial. Pasteurisation or hot fill puts a heat load on a ready-to-drink line. A stick pack sidesteps that step because water is added at home, though the stick still needs a seal against moisture. ## What drives the change Factors that move copper gluconate during storage | Factor | What it does | Control | Moisture | Raises water; cakes the powder; discolours it | Sealed foil or drum; dry store; desiccant where needed | Heat | Accelerates moisture pickup and colour change | Cool store; controlled drying | pH | Alkaline pH can precipitate copper hydroxide | Validate the matrix pH; buffer if needed | Redox actives | Copper catalyses oxidation of ascorbate, fats and flavours | Segregate; control headspace; test the blend | Light | Colour change over time | Opaque pack; dark store | Microbiology | Gluconate supports growth in solution | Preservative or process validation; closed system These factors overlap. A warm, humid store is worse than either condition alone, and an alkaline solution in clear glass combines several at once. The question is not whether the salt is stable in general, but how it behaves in a named pack, at a named condition, for a named period. ## A stability protocol for the ingredient Write the pack, the storage condition, the time points and the test panel into the protocol. Warehouse conditions are covered by 25 °C/60% relative humidity long-term and 30 °C/65% intermediate; 40 °C/75% accelerated storage stresses the pack. Add a light-exposure arm, because a dark incubator cannot see a colour change. Test assay, copper, water, appearance, identity and microbiology at each point. In a liquid or stick pack, repeat the panel in the matrix at the process pH and heat load, with the preservative system included. Report each result, not just a pass statement, and identify the pack and the lot family. Request the summary for the pack you are buying; a 1 kg pouch and a 25 kg drum differ in headspace and in how often they are opened. ## The finished formula changes the answer Water activity is low in a capsule or tablet, but the shell and the excipients can still pass moisture to a hygroscopic salt. Check water and appearance at release and after storage, and look for caking in the fill. A copper-containing multivitamin with ascorbic acid is a specific compatibility question: the metal can speed ascorbate oxidation, and the blend needs its own test. In a stick pack, the seal and the foil are the barrier; a pinhole fails the pack, so inspect the strip as well as the powder. A liquid brings pH, redox actives, heat and microbial risk together. Whether to use a preservative or a chelating strategy is a formulation and label decision, not a raw-material specification. Bulk data does not transfer to the matrix. The ingredient is the starting point; the finished product has to be measured in its own pack. ## How the shelf life is set There is no single shelf-life figure for copper gluconate; the pack and the storage condition set it. The retest period is written on the specification and backed by the stability file for that pack. Without the pack, the condition and the test panel, a shelf-life number is only a claim. When the retest period ends, re-assay the retained sample before extending use. Do not extend on assumption, and do not move a bulk figure to a repacked container. The product hub lists the packs. Release tests are on the COA page, pack and lead time on the MOQ page, and the assay and water tests in the methods library. The quality page explains the release file. ### 04 Copper gluconate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/copper-gluconate/moq/ Reviewed: 2026-11-19 Copper gluconate is packed as a 1 kg foil pouch, and that pouch is the minimum order; production volumes ship in 25 kg fiber drums. The standard pack is quoted at 1–7 days. A quotation can be compared only when it carries six things: the salt and CAS number, the specification with its assay basis, the quantity and pack, the destination and Incoterm, the document set, and the end use and market. In one lineA kilogram is the smallest unit that can carry its own lot code, sample and test record; the 25 kg drum is the production pack. ## Why the minimum is 1 kg One kilogram is a working unit. It leaves enough for a bench run, a retained sample and a third-party identity check, and it can fly without a pallet, so a formulator can hold material before the production plan is signed. The pack carries its own lot code and certificate; it is not a scoop out of a drum. Copper is a low-dose mineral, so a kilogram goes a long way. At 14.0% copper, 1 kg of salt contains about 140 g of the element, and a 1 mg label claim uses 7.14 mg of salt. The real constraint is traceability, not the amount of copper in the pack. Repacking below 1 kg adds a handling step and breaks the link to the original lot. The 25 kg drum lowers handling per kilogram, but it also means a longer storage period and more inventory. The minimum is a pack decision, not a volume incentive. ## Pack sizes Standard copper gluconate packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Bench trial, sample, small run | Moisture barrier; close tightly after use | Fiber drum | 25 kg | Full production | Liner bag; lot code repeated on drum and liner | Granulated powder | On request | Better flow, less dust | Changes the mesh and flow spec | Split or repack | Project-specific | Bench work | New pack identity; record the split The catalog powder passes 40 mesh at ≥95%. A granulated version is a separate physical specification: if the line needs coarser particles or freer flow, raise it before the quotation, because the mesh line and the schedule can both move. A diluted premix is a third specification, with the carrier and the copper figure written out. ## Dispatch and lead time Standard packs are quoted at 1–7 days after confirmation. That covers picking, paperwork and dispatch, not the transit, customs or the customer's own release. A granulated or non-standard pack takes longer, and the extra time should appear separately on the quotation. Ask for the dispatch date as well as the lead time. A 25 kg drum usually moves on a pallet; a 1 kg pouch can go as a parcel. The Incoterm decides who books freight and who clears customs, so the documents need to travel with the lot. ## What a quotation needs A quotation can be compared only when it states six things: - The salt and CAS number. Copper gluconate, 527-09-3, with the name written out. - The specification. Assay and basis, copper, water, mesh, heavy metals and microbiology. - The quantity and pack. 1 kg pouch, 25 kg drum, granulated or split. - The destination and Incoterm. Country, port or address, and trade term. - The documents. COA, specification, TDS, SDS, allergen, GMO and origin statements. - The end use and market. Supplement, food or another category, and the country of sale. A quotation that omits the market or the salt is not comparable with one that includes them. The same powder can fit one destination and fail the file for another, and the assay basis belongs in the offer. Commercial terms sit on the quotation, not on this page. ## The sample carries a lot The 1 kg pouch is the lot used for qualification. Check identity, assay, copper, water and microbiology before scaling, and keep a portion from the same pack. The lot code should run through the sample, the COA and the quotation. Without that link, the sample is a demonstration. For a bench quantity below 1 kg, ask first. A split from a bulk lot becomes a repack with new traceability, not the catalog pack; record it as a split. The bench sample and the production drum are not guaranteed to be the same lot. ## Terms to settle first The quotation states the commercial terms, Incoterm, pack, lead time and documents. The quality terms belong next to them: specification revision, COA per lot, retained sample, retest period and change control. A quality agreement before the first production order is easier than one written after a dispute. Returns and replacements are governed by the quotation and the quality agreement. If a lot fails the agreed specification, use the retained sample and a joint re-test rather than a photograph. Agree in advance which laboratory is acceptable to both sides and how a disputed result will be settled. The catalog specification is on the product hub. Release tests are on the COA page, market files on the compliance page, and the MOQ glossary entry defines the term. Freight and documents are covered by the logistics page, and release and retained samples by the quality page. ### 05 The regulatory file for copper gluconate URL: https://nutrition.rainwoodbio.com/products/minerals/copper-gluconate/compliance/ Reviewed: 2026-11-19 Copper gluconate is judged by the exact salt, the destination and the finished-product category, not by the certificate alone. Copper is a nutrient under both the EU and US frameworks, but a supplement, a fortified food and a food additive are separate routes with separate limits, labels and evidence. The buyer's regulatory team confirms the route; this page sets out the framework and the documents the file needs. In one lineThe specification covers the powder; the regulatory file establishes the route, the permitted limits and the label wording for the destination. ## What the file contains A useful file answers four questions in order. Which material and which version of the specification? Which lot, and what did its certificate measure? Which route, limits and label rules apply where the product will be sold? What happens to the file if the source, process or pack changes? The COA covers the lot, the TDS covers the specification and the SDS covers handling; the route question sits outside all three. Keep the allergen and GMO declarations, the origin record, the residual-solvent position and any customer-specific statement in the same file. If a statement is missing for a lot, say so before the order rather than at the port. The certificate does not choose the route. A supplement, a fortified food and a food additive are separate categories, and the same copper salt can be acceptable in one and not another. The destination, the daily amount and the label wording decide. ## European Union Food supplements in the EU sit under Directive 2002/46/EC. Its annexes name the nutrients and the forms that may be used, and the directive also sets the label particulars. The buyer's team checks the current annex entry for copper gluconate, the language of the member state and any national notification. Alongside it: general food law (Regulation (EC) No 178/2002), labelling (Regulation (EU) No 1169/2011), contaminants (Regulation (EU) 2023/915) and claims (Regulation (EC) No 1924/2006). If the use is as a food additive instead, Regulation (EC) No 1333/2008 and its lists are the entry point, and the evidence is not the same. The buyer should tell the supplier which route the file is being built for; a supplement specification cannot answer an additive question. Copper has a reference value for labelling. The label gives the amount of the nutrient per portion and the percentage of that value, calculated from elemental copper rather than from the salt. ## United States US regulation begins with the intended use. A dietary supplement follows DSHEA and 21 CFR 111; a conventional food or a food additive follows another path. The supplier names the basis for the ingredient and points to the document behind it; the buyer confirms that the basis reaches the finished product and the claim. 21 CFR 101.36 sets the Supplement Facts panel: copper per serving and the percentage of the Daily Value. The ingredient line names the source, so copper gluconate and copper bisglycinate cannot be swapped at the same copper number. A structure/function statement must be truthful, substantiated and carry the DSHEA disclaimer; disease claims are outside the route. Label and claim review sit apart from the certificate. State rules and customer specifications can be tighter than the federal requirement; record the state and the customer standard that apply. ## Contaminants and the finished dose The contaminant calculation belongs to the finished product, not only to the drum. Start with the table below, then apply the destination text and the daily dose to reach the final number. Contaminant limits to confirm for the finished product | Parameter | Typical supplement reference | What the file should show | Lead (Pb) | 3.0 mg/kg in the supplement (EU) | Lot result, method, limit and the finished-product calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement (EU) | Lot result and any category exception that applies | Mercury (Hg) | 0.10 mg/kg in the supplement (EU) | Lot result and method | Arsenic (As) | Customer or market limit | The agreed limit and the method For copper the element is the nutrient, not a contaminant. The raw-material copper figure of 13.5–14.5% is used to calculate how much salt delivers the declared daily amount, and that amount is checked against the applicable upper-level guidance for the market. That is a finished-product calculation, not a raw-material specification. Contaminant results are converted to the finished dose. A raw material at the lead ceiling leaves no headroom if the salt is the only source and the daily amount is large; a multi-mineral formula needs tighter limits. Microbiology is a buyer requirement everywhere; the catalog sets APC ≤1,000 cfu/g, yeast and mould ≤100 cfu/g, and absence of E. coli and Salmonella. ## Label and claims Nothing on this page or in the specification is a disease claim. Nutrient and structure/function claims depend on the market: the EU and GB registers list authorised wording and conditions, while the US permits substantiated structure/function statements with the DSHEA disclaimer. The brand's reviewer checks the wording, the dose and the product category. The certificate does not authorise a claim, and a claim does not alter the specification. The label names the copper source and declares elemental copper; claim review is a separate exercise with its own evidence. ## The document pack Documents that travel with a copper gluconate lot | Document | What it must show | Scope | Certificate of analysis | Lot, tests, methods, limits, results and basis | Every lot | Specification | Identity, assay basis, copper, water, physical and contaminant limits | Per product | Technical data sheet | Form, typical values, solubility, packing and storage | Per product | Safety data sheet | Hazard, handling and transport information | Per product | Allergen and GMO statements | Declarable allergens and GM status | Per product | Origin and manufacturing flow | Site, route and country of origin | Per supplier | Residual-solvent statement | Solvent used, result or declaration | Per product A certificate on its own is not a file; it only has meaning against the specification. ## Checklist before the first order - The salt, CAS number and specification version are named. - The COA reports assay and copper with the basis and methods, and the pair reconciles. - Water, heavy metals and microbiology are compared with the destination limits at the real dose. - The route — supplement, food or additive — is confirmed for the destination. - The label names the copper source and declares elemental copper per portion. - The claim wording is reviewed and no disease claim appears. - Source, process and pack are under change control; the retained sample carries the lot code. Start with the catalog specification on the product hub. The COA page explains the lot certificate, and the identity page covers the analytical evidence. Framework references are in the EU note and the US note; the quality page describes the release file, and the editorial policy explains the review process. ### 06 How to prove a copper gluconate lot is the named salt URL: https://nutrition.rainwoodbio.com/products/minerals/copper-gluconate/identity/ Reviewed: 2026-11-19 A copper gluconate lot is the named salt when four lines agree: the document names copper gluconate and CAS 527-09-3, the infrared spectrum shows the gluconate ligand, the complexometric copper result sits at 13.5–14.5%, and the assay, water and impurity results close the mass balance. The copper figure alone cannot separate copper gluconate from copper sulfate, copper oxide or a dilution. The ligand is the second half of the identity. In one lineThe salt is proved by agreement, not by one number: the gluconate spectrum, the copper figure and the water result must line up under the same CAS number. ## The four identity layers A certificate may name the right material without proving it. The four layers are independent checks; a supplier who supplies only the first has shown the label, not the material. Four layers of copper gluconate identity | Layer | Question | Test | What it proves | Document | Is the salt named? | Name, CAS number, formula | Paperwork only | Ligand | Is the anion gluconate? | Infrared spectrum and gluconate reaction | The gluconate | Metal | Is the copper figure right? | Complexometric titration or ICP-OES | The copper load | Mass balance | Is it diluted? | Assay, water, residue and impurities | Consistency of the numbers ## The copper ratio: proving the salt Copper gluconate has one copper ion and two gluconate anions. The formula is C12H22CuO14 and the molar mass about 453.84 g/mol, so the theoretical copper content is 63.55 ÷ 453.84 = 14.0%. The catalog range of 13.5–14.5% is consistent with that formula. The reciprocal, 7.14, converts copper into salt. A copper result below 13.5% means a diluted salt or a copper source with a lower copper fraction; the calculated assay will follow it down. A result above 14.5% points to a copper source with a higher fraction, such as sulfate or oxide. The ligand test decides which, because the copper figure alone can be blended to any target. The solution pH is a supporting check. The catalog describes a slightly acidic solution; a strongly acidic reading can point to residual gluconic acid or a sulfate, and an alkaline reading can point to another copper salt or an additive. pH is not a quantitative identity test, so it is read with the titration and the spectrum. ## X-ray diffraction and the solid state X-ray diffraction answers a solid-state question: is the powder crystalline, and does its pattern match a reference? Copper gluconate is crystalline, and a pattern that matches the reference supports the salt form. A crystalline copper sulfate or copper oxide has a different pattern, so XRD can screen for those adulterants when they are present as a separate phase. XRD is not a purity test, and it says nothing about the ligand or the copper level. An amorphous diluent can be invisible to it, and a small crystalline impurity can sit below the detection limit. A “match” is only useful with the reference pattern and the detection limit attached. For a disputed lot, XRD plus infrared plus copper plus the mass balance is stronger than any one of them. XRD is not routine at release here; “XRD conforms” with no pattern and no reference adds little. ## What adulteration looks like Common copper gluconate substitutions and the signals | Adulterant | What it does | Signal | Test | Glucose or maltodextrin | Dilutes the salt; lowers assay and copper | Both figures low; residue on ignition | Copper, assay, FTIR, water | Copper sulfate | Raises copper; adds sulfate | Copper above 14.5%; sulfate positive | Sulfate test, XRD, ICP-OES | Copper oxide | Raises copper; insoluble | Copper high; acid-insoluble residue | XRD, solubility, residue | Copper citrate | Different ligand; copper can be close | Infrared differs; citrate reaction | FTIR, citrate test | Excess gluconic acid | Lowers copper and pH | pH low; copper low | pH, titration | Water | Lowers the as-is assay; discolours | Water high; colour change | Karl Fischer, appearance Colour carries the least weight. Blue-green covers a range, and a copper salt or a dye can reproduce it. The stronger signals are the ligand spectrum, the copper figure and the mass balance. Appearance and assay without identity leave the likeliest substitution untested. ## Writing identity into the specification - “Copper gluconate, CAS 527-09-3, C12H22CuO14.” - “Assay 98.0–102.0% by EDTA titration; state the basis.” - “Copper 13.5–14.5% by titration or ICP-OES, reported with the method.” - “Identification by infrared spectrum against a reference and by copper titration.” - “Water ≤1.0% by Karl Fischer; appearance blue-green.” - “Particle size ≥95% through 40 mesh; contaminants and microbiology as tabulated.” - “No other copper salt or carrier above the agreed limit.” ## Five questions to put to a supplier - What copper salt is this lot, and which CAS number does the certificate carry? - Will you send the infrared spectrum with its reference, rather than a bare “conforms”? - How was copper measured, and does the result agree with the assay? - What water result was found, and which basis was used for the assay? - If identity is challenged, will you re-test the retained sample jointly? Five direct answers amount to an identity file. A single copper percentage does not. The product hub has the catalog specification; the COA page locates each figure on the certificate; the grades page covers the physical options; the level-four comparison covers the chelate; the FTIR note and the complexometric note explain the two tests; the quality page covers release. ### 01 What the COA for ferrous fumarate actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/ferrous-fumarate/coa/ Reviewed: 2026-11-19 The certificate for a ferrous fumarate lot reports appearance, identification by infrared spectrum and titration, assay as C4H2FeO4 at 97.0–101.0%, iron at 31.0–33.0%, loss on drying, particle size, heavy metals and microbiology. Both percentages sit on the dried basis, so the moisture result is part of the assay rather than a separate note. The ranges are the catalog specification; a batch certificate is the evidence for a specific pack. In one lineThe assay and the iron figure describe one salt from two directions; without the loss on drying beside them, neither percentage has a basis. ## The certificate as a test report Each row should be repeatable by a second laboratory: the parameter, the method and the release limit, with the header naming the salt, CAS number, lot code, pack size and specification edition. A bare “conforms” records a judgement, not the evidence for it. The identity row is the one that separates ferrous fumarate from another red iron powder. The assay and iron rows then say how much of the salt is present. Read them together, because the ratio between them is a check on the formula. Identity, assay, moisture and contaminants · ferrous fumarate | Parameter | Method | Release limit | Appearance | Visual | Orange-red to reddish-brown powder | Identification | Infrared spectrum and titration | Conforms to reference | Assay (C4H2FeO4, dried basis) | Complexometric titration | 97.0–101.0% | Iron (Fe), dried basis | Complexometric titration | 31.0–33.0% | Loss on drying | Gravimetric | ≤2.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh ## Dried basis on an anhydrous salt Ferrous fumarate is anhydrous: C4H2FeO4, 169.90 g/mol, with no water of crystallisation. The ≤2.0% loss-on-drying limit therefore covers surface moisture rather than a hydrate shell. The dried-basis correction is small, but it is not optional. A lot reading 97.4% as-is with 1.6% loss calculates to 98.98% on the dried basis; an iron result of 31.7% as-is becomes 32.2%. The formula sets the expected ratio. Iron is 55.845 ÷ 169.90 = 32.87% of the molecule by mass, so iron divided by assay should sit near 0.329. A lot at 99.0% assay and 32.5% iron is consistent with the salt. A lot at 99.0% assay and 31.0% iron passes both release windows, but the ratio is 0.313; that is a question for the supplier, not a result to average away. Unlike ferrous sulfate heptahydrate, which carries about 45% water of crystallisation, this salt has no hydrate water; a high loss on drying is surface water or a wet pack. ## Release limit versus batch result A limit is a boundary; a result is a measurement. Both belong on the page, in separate columns, with the method beside them. A column that repeats the specification range has recorded the boundary, not the lot. What the result column should contain | Parameter | Release limit | Result column | Assay | 97.0–101.0% dried basis | A measured percentage with the method and the basis | Iron | 31.0–33.0% dried basis | A measured percentage; the ratio to assay checked | Loss on drying | ≤2.0% | A measured percentage and the conditions used | Heavy metals | Per element | A figure in mg/kg for each element, with the detection limit | Particle size | ≥95% through 40 mesh | The measured percentage through the sieve Identity lines are the exception: a comparison can legitimately report “conforms”, provided the certificate names the reference and the edition. The contaminant lines cannot. A “Pb: <3 mg/kg” entry describes the method's sensitivity; an actual figure describes the lot. Ask for the number. The oxidation state is the usual gap. Complexometric titration measures iron, and the catalog names it without saying whether the titre was run on ferrous iron or on total iron after reduction. If the certificate cannot answer that, ask for a ferrous-specific result or an agreed ferric limit beside it. The identity page sets out the difference. ## What moves between batches The reaction, the drying step and the milling move different lines. Drying drives the loss on drying; milling and sieving move the 40 mesh result; the reaction and the washing move residual acidity and the free-fumaric-acid figure. A change of sieve can change the powder's flow without changing the chemistry. Colour is the least quantitative line and often the earliest signal. A batch that is noticeably darker or browner than the catalog description can carry a ferric fraction or an iron oxide contaminant while the assay still passes. Pull the batch record and the ferrous result before rejecting on appearance alone. Look for a trend, not a single result near an edge: iron drifting low against a stable assay, or loss on drying climbing. Certificate, pack and retained sample should carry the same lot code. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a label that names ferrous fumarate, or a disputed result. The useful panel is not a repeat of the certificate. It is infrared identity, complexometric iron, a ferrous-specific titration or total iron by ICP-OES for the ferric difference, loss on drying, the heavy-metal panel by ICP-MS, microbiology, and sieve analysis. Add X-ray diffraction if a crystalline iron oxide or another salt is suspected, and an HPLC check on the fumarate if the free acid is the question. Ask the laboratory to report its detection limit and basis for every line. A “not detected” without a limit is evidence about the method, not the sample. When a result is contested, send the retained sample, the supplier's certificate and the specification to the referee, and ask for tests that separate the forms rather than a repeat assay. ## What to compare between suppliers Six lines to compare between two ferrous fumarate certificates | Line | What to ask | Why it matters | Form and CAS | Anhydrous ferrous fumarate, CAS 141-01-5 | The salt name and the formula set the iron figure | Assay and iron | Both results on the dried basis, with methods | The ratio is a check on the salt | Loss on drying | Result and conditions | Defines the basis and predicts caking | Oxidation state | Ferrous result or a ferric limit | Total iron does not show Fe(II) | Particle size | Mesh and percentage passing | Flow, dust and fill weight | Traceability | Lot code on certificate, pack and retained sample | An accurate certificate can cover another drum If two offers agree on iron but not on the basis or the oxidation state, they are not offers for the same material. The catalog specification sits on the product page; the fumarate versus sulfate page takes the salt comparison further; the methods library describes the titration and ICP techniques; the quality page shows the release file. ### 02 Ferrous fumarate grades: powder, mesh and the salt choice URL: https://nutrition.rainwoodbio.com/products/minerals/ferrous-fumarate/grades/ Reviewed: 2026-11-19 The catalog grade is an anhydrous ferrous fumarate powder with at least 95% passing 40 mesh, and a granulated form is available on request. Those are process variants of one molecule. The larger decision is the salt: at 31.0–33.0% iron the fumarate carries about 60% more iron per gram than ferrous sulfate heptahydrate, so the choice changes the fill, the colour and the ingredient line. In one lineThe mesh decides how the powder runs; the salt decides how much iron each gram carries and what the label may name. ## A grade is a process variant, not a new salt Buyers use “grade” for several different things: mesh, granulation, assay, and sometimes the salt itself. On this page a grade is a variation on ferrous fumarate: the same C4H2FeO4, the same CAS 141-01-5, the same 31.0–33.0% iron, with a different particle-size profile or a granulation step. A different salt is a different material with its own iron figure. The distinction matters on the purchase order. “Iron 32%” does not name a salt; “ferrous fumarate, 40 mesh” does. A supplier can meet the first with a ferrous sulfate blend, a ferric compound or a diluted powder, and the label would then be wrong. ## The iron sources around it Ferrous fumarate among the common iron sources | Source | Iron form | Elemental Fe | In water | What it changes | Ferrous fumarate | Fe(II) salt | 31.0–33.0% | Practically insoluble | Compact fill; suspension; orange-red colour | Ferrous sulfate heptahydrate | Fe(II) salt | 19.5–20.5% | Freely soluble | Larger mass; acidic solution; pale blue-green | Ferrous gluconate dihydrate | Fe(II) salt | 11.8–12.5% | Soluble | Largest mass; acidic solution | Ferrous bisglycinate | Fe(II) chelate | About 20–23% | Soluble | Chelate identity; different tests | Ferric pyrophosphate | Fe(III) salt | 24.0–26.0% | Practically insoluble | Ferric state; pale colour Read the table as a map of the options; the lot certificate supplies the figure for the weigh-up. The rows are not a ranking, because each source fits a different dosage form, label and process. ## 40 mesh, colour and flow The 40 mesh line corresponds to an aperture of about 425 µm, and ≥95% passing leaves a coarse tail of up to 5%. Two lots that both pass can behave differently: one at 95.1% has more coarse particles than one at 99.9%, and flow, dust and blend uniformity follow that tail. Ask for the actual percentage, not only the pass statement. Ferrous fumarate is practically insoluble in water and dissolves in dilute acid. That is a formulation fact: a tablet or capsule can carry it as a solid, and a suspension needs a dispersion step and a check for settling. A clear drink is not its natural home. Colour runs from orange-red to reddish-brown. The window is wide, and a granulated lot can look different from a milled one without any chemical change. A dull or brown cast is a prompt to check the iron and the ferric figure, not a grade difference. Granulation is available on request. It improves flow and reduces dust, and it adds a process step and a granulating aid that may need to be declared. The iron figure and the assay stay the same; the particle-size line and the lead time move. ## The grade and the fill A label claim is written in elemental iron, while the weigh-up is in salt. At the catalog midpoint, 1 mg of iron takes about 3.1 mg of ferrous fumarate or about 5.0 mg of the sulfate heptahydrate. That difference is the fill. Salt needed for a label claim · calculated at the stated iron ranges | Iron claim | Ferrous fumarate 31.0–33.0% | Ferrous sulfate 19.5–20.5% | 14 mg | 42–45 mg | 68–72 mg | 18 mg | 55–58 mg | 88–92 mg | 20 mg | 61–65 mg | 98–103 mg | 30 mg | 91–97 mg | 146–154 mg A 500 mg fill of ferrous fumarate carries 155–165 mg of iron, which is far more than most single-dose claims and leaves room for other actives. The same fill of sulfate carries 98–103 mg. The arithmetic is not a recommendation; it is how the capsule size and the number of units follow from the claim. Compression adds another question. A fine powder may need granulation to run on a tablet press, and the granulating aid then belongs in the ingredient list. A capsule can take the milled powder directly, though dust and static matter at the filling station. ## How to write the grade into the specification - “Ferrous fumarate, anhydrous, C4H2FeO4, CAS 141-01-5.” - “Assay 97.0–101.0% on the dried basis; iron 31.0–33.0% on the dried basis.” - “Identification by infrared spectrum and titration against a named reference.” - “Loss on drying ≤2.0%; ≥95% through 40 mesh.” - “Powder, 40 mesh; granulated on request, with the granulating aid declared.” - “Heavy metals and microbiology as the catalog; ferric figure or ferrous-specific result agreed separately.” Name the mesh and the granulation, not only the salt. The same ferrous fumarate at a different particle size is a different handling experience, and a tablet line and a capsule line rarely want the same powder. ## When fumarate is the wrong grade It is the wrong choice when the formula needs a clear solution: the salt is practically insoluble, and no mesh makes it dissolve. It is wrong when the label names another iron source, because the ingredient line and the identity tests change with the salt. It is also a poor fit for a pale product where the orange-red colour would show through a translucent shell or a light powder blend. In those cases the answer is a different specification: ferrous sulfate when a soluble acidic salt fits, ferric pyrophosphate when a pale ferric source is wanted, or a chelate when the label names one. The fumarate versus sulfate page works through the two-salt comparison. The catalog line is on the ferrous fumarate product page. The COA page shows the assay and moisture lines; the ferrous sulfate page carries the soluble alternative; the iron pyrophosphate page covers the ferric option; the methods library explains the tests. ### 02.1 Ferrous fumarate vs ferrous sulfate: iron, solubility and the fill URL: https://nutrition.rainwoodbio.com/products/minerals/ferrous-fumarate/grades/ferrous-fumarate-vs-sulfate/ Reviewed: 2026-11-19 Ferrous fumarate and ferrous sulfate heptahydrate deliver the same iron in different packages. The fumarate is specified at 31.0–33.0% iron, the heptahydrate at 19.5–20.5%, so a 20 mg iron claim takes about 61–65 mg of fumarate or 98–103 mg of sulfate. The fumarate is practically insoluble in water and the sulfate is freely soluble, so the fill, the taste, the colour and the process change with the salt. In one lineThe fumarate carries about 33% iron and the sulfate heptahydrate about 20%, so the same claim needs roughly three-fifths of the mass; solubility and the label move with it. ## Two ferrous salts, two iron figures Both materials supply iron in the ferrous state, and that is where the similarity ends. Ferrous fumarate is the iron(II) salt of fumaric acid, an anhydrous crystalline solid with no water of crystallisation. Ferrous sulfate heptahydrate is the iron(II) salt of sulfuric acid with seven water molecules in the lattice, and those waters are about 45% of the mass. Ferrous fumarate and ferrous sulfate heptahydrate side by side | Property | Ferrous fumarate | Ferrous sulfate heptahydrate | Formula | C4H2FeO4 | FeSO4·7H2O | CAS number | 141-01-5 | 7782-63-0 | Molecular weight | 169.90 | 278.01 | Iron by formula | 32.87% | 20.09% | Iron specification | 31.0–33.0% | 19.5–20.5% | Water in the solid | None; anhydrous | About 45% as water of crystallisation | Appearance | Orange-red to reddish-brown powder | Pale blue-green crystalline solid | Solubility in water | Practically insoluble; soluble in dilute acids | Freely soluble; acidic solution The formula figures and the specification figures are close but not identical, because a specification allows for assay and measurement. Use the certificate in front of you for the weigh-up, not the midpoint of a table. ## Solubility changes the dosage form The fumarate does not dissolve in water to any useful extent. A capsule or a tablet can carry it as a solid, and a suspension can carry it as dispersed particles, but a clear aqueous drink cannot. In dilute acid it dissolves, which is why an acidic matrix and the stomach's acid are part of its behaviour. The dissolution step in a tablet is therefore a real formulation question: granulation, disintegrant and compression force all affect how quickly the particles break down. The sulfate dissolves readily and gives an acidic solution. That makes it easy to incorporate into a liquid or a stick pack, and it also means the taste is acidic and metallic. The solution is pale green; on oxidation it turns yellow-brown, and the colour change is visible in a clear pack. Solubility is a formulation property, not a dose. It does not settle how much iron is absorbed, and this page makes no claim about absorption, tolerance or any health effect. Those are clinical and regulatory questions for the finished product, not a reason to choose one salt on a technical page. ## The fill arithmetic The label states elemental iron while the formula weighs a salt, so the conversion is a division. Between these two salts the gap is large enough to change a capsule size. Salt mass needed for a declared iron figure | Iron claim | Ferrous fumarate at 31.0–33.0% | Ferrous sulfate at 19.5–20.5% | 14 mg | 42–45 mg | 68–72 mg | 18 mg | 55–58 mg | 88–92 mg | 20 mg | 61–65 mg | 98–103 mg | 30 mg | 91–97 mg | 146–154 mg At a fixed fill, the gap runs the other way. A 500 mg fill of ferrous fumarate carries 155–165 mg of iron; the same fill of the heptahydrate carries 98–103 mg. For a product with several actives and a fixed capsule size, the fumarate leaves more room for the rest of the formula. For a product that needs a large, soluble iron dose in a stick pack, the sulfate's mass may be part of the design rather than a problem. The 30 mg row matters in the United States. A solid oral supplement at or above 30 mg of iron per dosage unit carries the accidental-overdose warning, and the fumarate reaches that threshold at about 91–97 mg of powder. A 100 mg capsule is over the line; a 60 mg capsule is under it. ## Colour, taste and the blend Colour is the first practical difference. The fumarate is orange-red to reddish-brown and opaque; the sulfate is pale blue-green and translucent when crystalline. In a white or pastel powder blend, the fumarate shows through; in a clear shell, both salts are visible, but only the sulfate dissolves into a coloured solution. Taste follows solubility. The sulfate's acidic, metallic taste is immediate because it dissolves; the fumarate is chalky and largely insoluble, so the taste is flatter but the mouthfeel is gritty. A coated tablet hides both; a chewable or a drink mix does not. Both salts are ferrous and both oxidise, but the sulfate has the extra sensitivity of its water of crystallisation: it can lose water in dry air and pick up moisture and oxidise in humid air. The fumarate is anhydrous but still reacts at the particle surface when moisture is present. Iron from either salt can catalyse the oxidation of oils and some vitamins, so the blend has to be tested as a blend, not only as a powder. ## What the label has to say In the European Union, the iron-source entry for a supplement is checked against Annex II to Directive 2002/46/EC, and the ingredient list must name the form that is actually in the drum. The nutrition declaration gives elemental iron in mg and as a share of the 14 mg reference intake. A label that names one salt while the drum contains the other is mislabelled, even if the iron figure is correct. US labelling puts elemental iron in the Supplement Facts panel against an 18 mg Daily Value, with the salt named in the ingredient list. The 30 mg warning threshold is checked per dosage unit, as above. A switch from sulfate to fumarate changes the salt name, the salt mass and possibly the capsule size, so the artwork, the nutrition calculation and the batch record all have to change together. ## When to choose which Choose the fumarate when the dosage form is a capsule or a tablet, when the fill is tight, and when an insoluble, orange-red powder fits the colour and the taste of the product. It is the practical salt for a compact solid dose with a high iron figure per gram. Choose the sulfate when the formula needs a soluble iron source, when an acidic solution is acceptable, and when the label already names the sulfate. It is the easier salt for a liquid or a stick pack, and its lower iron fraction is simply part of the mass calculation. Neither choice is a substitution at the same weight. The ferrous fumarate product page carries the catalog specification; the ferrous sulfate page carries the soluble alternative; the grade page places both among the other iron sources; the iron pyrophosphate page covers the ferric option; the methods library explains the iron and identity tests; the quality page describes the release file. ### 03 Ferrous fumarate stability: dry powder, slurry and pack URL: https://nutrition.rainwoodbio.com/products/minerals/ferrous-fumarate/stability/ Reviewed: 2026-11-19 Ferrous fumarate is an anhydrous, practically insoluble ferrous salt, and the dry powder in a sealed pack is its most forgiving format. Moisture, acid and heat are what drive Fe(II) to Fe(III); the catalog limits loss on drying to 2.0%, and the retest period comes from data on the pack that will be sold, at the condition it will meet. A suspension or an acid solution is a different question from the powder. In one lineThe dry powder is the stable format; moisture, acid and heat are what move ferrous iron to ferric, and the pack is the first control. ## The powder: moisture, oxygen and colour The catalog loss on drying is ≤2.0%, and because the salt is anhydrous that limit is about surface water rather than crystal water. Moisture is still the main storage variable. Water on the particle surface lets ferrous iron react with oxygen, and the reaction shows first as a colour shift from orange-red towards brown. The iron assay can remain inside its window while the ferric fraction grows, which is why the loss-on-drying result and the appearance belong beside the iron figure. Keep the powder in its original foil pouch or in the lined fiber drum, closed, in a dry store. A pouch that has been opened, folded over and left in a humid room is no longer the pack that was qualified. If the remainder will be held for weeks, transfer it to a smaller opaque, moisture-barrier container and record the opening date. Heat accelerates the same reaction rather than starting a new one. A sealed pack in an ambient warehouse is the normal case; a hot loading bay, a vehicle or a greenhouse is not. Let a cold pack equilibrate before opening, so condensation does not form on the powder. ## The slurry and the acid solution Ferrous fumarate is practically insoluble in water, so a simple aqueous mix is a suspension, not a solution. The solid settles, and the dispersion has to be maintained through the fill. The dissolved fraction is small, but it is the fraction that reacts fastest, and a suspension that is warmed or held for hours gives it more time. The salt dissolves in dilute acid. Once in solution, ferrous iron is exposed to oxygen, heat and pH change at the same time, and the colour darkens as ferric iron forms. A beverage or a liquid supplement therefore has to be validated in its own matrix, at its own pH and process temperature; a bulk-powder stability result does not transfer to the bottle. If a liquid is unavoidable, keep dissolved oxygen low, control the pH, protect the product from light and validate the hold time before filling. Ascorbic acid and some reducing sugars can hold iron in the ferrous state, but they are also consumed in the process, so the protection has a limit that has to be measured rather than assumed. ## What drives the change Factors that move ferrous fumarate during storage | Factor | What it does | Control | Moisture | Surface water enables oxidation; LOD rises; colour darkens | Sealed foil or lined drum; dry store | Oxygen | Converts Fe(II) to Fe(III) at exposed surfaces | Low headspace; closed pack; process control | Acid | Dissolves the salt and makes iron mobile | Check matrix pH; validate the acid contact time | Heat | Raises the rate of moisture and oxidation reactions | Controlled store; cool process | Excipients | Alkaline or oxidising actives change the local environment | Compatibility trial in the real blend | Time | Small changes accumulate across the retest period | Pack-specific stability data and re-test The factors reinforce one another: a warm, humid, acidic blend is a harder case than any one of them alone, and a clear bottle of suspension adds light and a large exposed surface. Stability in the abstract says little; the answer depends on this pack, this matrix and this period. ## A stability protocol for the ingredient Set the protocol around the pack, the storage condition, the time points and the tests. Warehouse conditions are represented by 25 °C/60% relative humidity and 30 °C/65% relative humidity; 40 °C/75% relative humidity is the accelerated arm. Add a light-exposure arm where the finished pack is transparent. Test iron, a ferrous-specific result or a ferric figure, loss on drying, appearance, microbiology and sieve analysis at each point. If the material is going into a tablet or a capsule, repeat the work in the blend and in the finished unit, because the excipients and the compression step change the local moisture and the surface area. Give the individual results, not a pass statement, and tie them to the pack and the lot family. A drum result cannot stand in for a pouch: geometry, headspace and how often the pack is opened all differ. ## The finished formula changes the answer Water activity is low inside a tablet or capsule, but the shell and the excipients can still move moisture. Acidic actives can dissolve part of the salt at the particle surface; alkaline actives can raise the local pH and precipitate ferric iron as a hydroxide. Both effects are matrix questions, not catalogue questions. Test the blend, not only the powder. Iron also catalyses the oxidation of oils and some vitamins, and the rate depends on how mobile the iron is. A dry, insoluble salt offers less mobile iron than a dissolved one, which is one reason the fumarate is common in solid dosage forms. It is not immunity: a moist blend or a high-shear process can still bring the iron into contact with a sensitive ingredient. A stick pack or a powder blend carries the colour and the taste of the salt into the finished product. A flavour trial belongs with the stability trial, because a colour change that is acceptable in a capsule may be a defect in a pale drink mix. ## How the shelf life is set A single shelf-life figure would not be meaningful for this powder, because the pack and the storage condition set the clock. The specification's retest period should cite a stability file built on that pack. Without the pack, the condition and the test panel, a date is only an assumption. When the retest period ends, re-assay the retained sample before extending use. A bulk figure does not transfer to a repacked container, and a granulated lot does not necessarily behave like the milled powder it came from. Pack sizes are on the product hub, release tests on the COA page, ordering on the MOQ page and particle options on the grade page; the quality page describes the release workflow. ### 04 Ferrous fumarate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/ferrous-fumarate/moq/ Reviewed: 2026-11-19 The MOQ for ferrous fumarate is 1 kg, supplied as a 1 kg foil pouch; the standard bulk pack is a 25 kg fiber drum. Lead time is 1–7 days for the catalog powder. A firm quotation needs the salt and CAS number, the assay basis, the quantity and pack, the destination and Incoterm, the documents, and the intended market. In one lineOne kilogram is the qualification pack: enough to test identity, iron and mesh, and small enough to trace a single lot. ## Why the minimum is 1 kg A 1 kg pack is enough for a bench trial, a retained sample and an independent identity test, and it ships as a parcel when the production plan is not fixed yet. It is a lot with a certificate, not a scoop from a drum. Below 1 kg, material is usually split from a larger lot and repacked, which adds handling and weakens the link to the original pack without changing the chemistry. The 25 kg drum is the bulk unit: less handling per kilogram, but more inventory and a longer storage period. The MOQ is a pack decision, not a volume target. ## Packs and formats Standard ferrous fumarate packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Tablet compression, flow control | Particle profile and lead time change The catalog powder is 40 mesh, with at least 95% passing a 425 µm sieve. Granulation is a separate specification rather than a packing choice. Tell us before the quotation if the press needs a freer-flowing powder: granulation changes the particle-size line and can change the lead time. ## Lead time and dispatch The standard pack is quoted at 1–7 days from order confirmation. The clock covers picking, documents and dispatch, not the transit, the customs entry or the customer's quality release. Granulation, a split pack or a non-standard document set adds time, and the quotation should say so. Ask for a dispatch date as well as a lead time. A drum may go on a pallet and a pouch as a parcel; the Incoterm decides who books the freight and who clears the entry. Send the documents with the lot, not after it. ## What a quotation needs Six items make a quotation firm enough to compare: - Product and form. Ferrous fumarate, anhydrous, CAS 141-01-5, with the salt name written out. - Specification. Assay, iron basis, loss on drying, mesh, contaminant limits and microbiology. - Quantity and pack. A 1 kg pouch, a 25 kg drum, or a granulated lot. - Destination and Incoterm. Country, port or address, and the trade term. - Documents. COA, specification, SDS and any importer statement the market requires. - Intended use and market. Supplement, food or other use, and the country of sale. Leave out the market or the salt form and the quotation cannot be compared with another. The same powder can fit one destination and fall outside the file for another, and the paperwork is part of the offer. Commercial terms are stated on the quotation, not on this page. ## The sample is a lot, not a demonstration Use the 1 kg pack to qualify the material. Test infrared identity, assay, iron, loss on drying, mesh and microbiology before scaling, and retain a sample from the same pack. The sample, the COA and the quotation should carry one lot code; without that link the sample is only a demonstration. A bench project that needs less than a kilogram should raise it before the order. Such a split is a repack with its own history; record where it came from, and do not expect the production drum to share its lot. ## Terms to settle before the first order Commercial terms sit on the quotation: Incoterm, pack, lead time and documents. Quality terms sit beside them: specification revision, COA per lot, retained sample, retest period and change control. Sign the quality agreement before the first production order, not after the first dispute. Returns and replacements follow the quotation and the quality agreement. A failed lot is handled through the retained sample and a joint re-test; a photograph of the powder is not evidence. Agree in advance who pays for the referee test and which laboratory both sides accept. The product hub carries the catalog specification; the COA page lists the release tests; the compliance page covers the market files; the methods library describes the identity and iron tests; the quality page and the logistics page cover release and shipping. ### 05 The regulatory file for ferrous fumarate URL: https://nutrition.rainwoodbio.com/products/minerals/ferrous-fumarate/compliance/ Reviewed: 2026-11-19 Ferrous fumarate is the iron(II) salt of fumaric acid, CAS 141-01-5. Whether a shipment is placed on the market as a food supplement, a food ingredient or a food additive is a route decision, and the route differs by market; the buyer's regulatory team confirms the one that applies. This page names the framework, the limits and the documents that file needs. In one lineThe form is the starting point: the file has to show which iron source the label names, which route the destination allows and which limit the finished product meets. ## Four checks, four instruments Four questions sit behind a regulatory file. Is the iron source permitted for the intended use in the destination? Do the contaminant results meet the limit on the product as sold? Does the label name the source and declare the elemental iron in the required way? And is the claim, if there is one, allowed for that product and market? A certificate answers none of these on its own; it supports the second question and part of the first. The route is the first decision because the same powder can be a supplement ingredient in one file and a food additive in another. The supplement route and the food-additive route have different instruments, different labels and sometimes different purity monographs. The buyer's regulatory team owns that decision. ## European Union For a food supplement, the iron-source entry is checked against Annex II to Directive 2002/46/EC, and the buyer's team confirms the entry, the current consolidated text and any national implementing measure. Labelling follows Regulation (EU) No 1169/2011. The ingredient list carries the iron source, and the nutrition declaration states elemental iron in mg plus its percentage of the 14 mg reference intake set in Annex XIII. Contaminants are governed by Regulation (EU) 2023/915, which applies to the product as sold rather than to the drum. Iron has no harmonised EU-wide maximum in food supplements, so several member states apply national figures; the destination list has to be checked product by product, as of this review. For a food use rather than a supplement, the additive and labelling framework is different, and the file has to show the basis for that use. Do not carry a supplement conclusion across to a food application without rechecking the route. ## United States A dietary supplement is sold under the supplement route, with the Supplement Facts panel, the iron Daily Value of 18 mg, current good manufacturing practice under 21 CFR 111, and the claim rules that apply to supplements. There is no pre-market approval list of the European kind, so the seller has to hold the basis for the ingredient and be able to show it. The buyer's team confirms that basis for the finished product. The US rules single out iron for a warning that other minerals do not need. Under 21 CFR 101.17(e), a solid oral supplement at or above 30 mg of iron per dosage unit must carry the accidental-overdose statement; verify the current wording before the artwork is approved. With this salt at 31.0–33.0% iron, that threshold arrives at 91–97 mg of powder, so a 100 mg capsule crosses it and a 60 mg capsule does not. A food use is a separate route. The file may cite the GRAS affirmation at 21 CFR 184.1307d for ferrous fumarate, and the buyer's team confirms that the intended use is covered. A supplement conclusion does not authorise a food use, and the reverse is also true. ## Contaminants and the finished-product calculation Contaminant limits for food supplements, as of this review | Element | EU | US | UK | Lead | 3.0 mg/kg (product as sold) | No federal limit for supplements; state law may apply | Retained EU limit; confirm current UK law | Cadmium | 1.0 mg/kg | No federal limit for supplements | Retained EU limit | Mercury | 0.10 mg/kg | No federal limit for supplements | Retained EU limit | Arsenic | No EU-wide figure; national rules vary | No federal limit for supplements | Check current UK law The catalog specification for the powder is Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg. Those figures look like the finished-product ceiling, but they govern a raw material that will be diluted by the rest of the formula. Work the ceiling backwards from the serving: multiply the raw-material result by the share of the serving that the salt occupies, then hold the answer against the limit for the product as sold. The high iron fraction helps here. A 100 mg capsule of ferrous fumarate supplies 31–33 mg of iron and only about 67–69 mg of fumarate, so the salt is a large share of a small fill. A contaminant result in the powder is not diluted much in that capsule; in a 500 mg blend with other actives, it is. Do the calculation for the actual formula before setting the purchase limit. ## Claims and the label boundary Regulation (EU) No 432/2012 is the instrument behind the permitted iron statements in the European Union, and each statement comes with conditions of use. The permission belongs to the finished product and its wording, not to the drum, so the brand's reviewer checks the exact sentence against the current entry. This page neither reproduces those statements nor makes a health claim for the powder. In the United States, a structure/function statement is the brand's own responsibility: it must be truthful, substantiated and accompanied by the DSHEA disclaimer. Neither market offers a disease claim. Describing the iron figure or the fill stays on the technical side; naming a condition moves the sentence into a different regulatory category. ## The document pack - A lot certificate with identity, assay, iron, moisture, mesh, metals and microbiological results. - A specification and technical data sheet naming the salt, CAS number and grade. - A 16-section safety data sheet. - Declarations for allergens, GMO status, origin, irradiation and residual solvents. - Site certificates, with the scope checked against the plant that produced the lot. - Stability data behind the retest period for the pack. - The nutrition arithmetic from salt mass to elemental iron per serving, plus the artwork and its claim review. ## A short pre-shipment checklist Checks before the first shipment | Check | Evidence | Where it fails | Route | The instrument and entry the destination file relies on | A supplement file used for a food application | Contaminants | Four element results converted to the finished dose | A powder result presented as a finished-product result | Label | Salt name, elemental iron, percentage of the reference intake | Salt mass declared as iron | Iron warning | The US threshold checked against the dosage unit | A 30 mg unit shipped without the warning | Claims | Authorised wording and conditions, or no claim | A structure/function sentence that names a condition The catalog specification is on the ferrous fumarate product page; the certificate is read on the COA page; the tests that separate the salt from a sulfate or an oxide are on the identity page; the soluble alternative is on the ferrous sulfate page; the ferric option is on the iron pyrophosphate page. Market notes are under European Union and United States, and the quality page describes the release file. ### 06 How we prove a ferrous fumarate lot is the ferrous salt URL: https://nutrition.rainwoodbio.com/products/minerals/ferrous-fumarate/identity/ Reviewed: 2026-11-19 A ferrous fumarate lot is the named salt when four lines agree: the document names C4H2FeO4 and CAS 141-01-5; the infrared spectrum matches a reference; iron sits at 31.0–33.0% against the 32.87% the formula predicts; and the condition tests close the mass balance. An iron percentage alone cannot separate the fumarate from another red iron powder, and it cannot show whether the iron is still ferrous. In one lineIdentity is the ratio as much as the number: one ferrous ion per fumarate, 32.87% iron by formula, confirmed by IR and a mass balance. ## Four layers, four different failures Each layer answers a different question, and a certificate that fills only one of them has not proved the material. The document can be right while the powder is wrong; the spectrum can match while the lot is diluted; the iron figure can be high while the iron is ferric. The layers are separate on purpose. Identity layers: what each test establishes | Layer | Test | What it establishes | What it leaves open | Document | Name, formula, CAS, hydrate state | The file is about the right molecule | Nothing about the powder | Chemical identity | Infrared spectrum against a reference | The fumarate ligand is present | Not a quantity, not the oxidation state | Iron ratio | Iron and assay on the dried basis | The iron-to-fumarate proportion | Blind to ferric iron if the method is total iron | Condition | Loss on drying, mesh, metals, microbiology | Fitness for the specification | No proof of identity The document layer is not paperwork for its own sake. Ferrous fumarate is anhydrous, so a certificate that describes a hydrate, or that gives a molecular weight for a hydrated form, has described a different material. The CAS number and the formula should match the specification before any instrument is used. ## The 1:1 ratio and the iron figure Ferrous fumarate is one ferrous ion bound to one fumarate dianion: C4H2FeO4, 169.90 g/mol. Iron is 55.845 ÷ 169.90 = 32.87% of that mass, and the fumarate part is the remaining 67.13%. The ratio is fixed by the formula, so the two release lines are not independent: iron divided by assay should sit near 0.329. That ratio is a diagnostic. A lot with 99.0% assay and 32.5% iron is consistent with the salt. A lot with 99.0% assay and 31.0% iron passes both windows, but the ratio is 0.313, which suggests a diluent, a wet lot or an iron salt with a different anion. A lot with 99.0% assay and 34.0% iron points the other way, towards an iron oxide or a ferric phase that the titration counts as iron but the fumarate does not account for. The oxidation state needs its own measurement. Complexometric titration gives an iron figure, and unless the method is written to preserve or reduce a specific state, it is a total-iron result. A ferrous-specific redox titration, or total iron by ICP-OES beside a ferrous result, separates Fe(II) from Fe(III). The difference is the ferric fraction, and it is the number that explains a dark colour. A free-fumaric-acid check by HPLC adds the other side of the balance. An excess of free acid, or a fumarate figure that does not match the iron, points to a blend or a reaction that did not go to completion. Ask for the chromatogram if the number is near a limit. ## What X-ray diffraction adds Ferrous fumarate is a crystalline, anhydrous solid, and X-ray diffraction reads its lattice. A pattern that matches a reference confirms the crystalline phase; a pattern with extra lines can show a crystalline impurity such as an iron oxide, a ferric phase or an inorganic diluent. It can also distinguish the fumarate from ferrous sulfate heptahydrate, which has its own hydrate lattice and a very different iron figure. XRD is not a routine release test here. A certificate that states “XRD conforms” but names no reference has told the reader very little. Ask for the reference pattern, the sample preparation and the detection limit. The method is most useful when the question is solid form or a suspected crystalline contaminant, not when the question is assay. Infrared and XRD are complementary. IR identifies the organic ligand through its carboxylate bands; XRD identifies the crystal phase. Neither measures iron, and neither replaces the ratio calculation. ## The substitutions that move one number at a time Adulteration routes for ferrous fumarate and the tests that show them | Route | What moves | Test that shows it | Ferrous sulfate or another ferrous salt | Iron may pass; sulfate, LOD and IR change | Infrared, sulfate, loss on drying | Iron oxide or a ferric powder | Total iron rises; ferrous iron does not | Ferrous against total iron, XRD | Diluent such as dextrose or maltodextrin | Assay and iron fall together; IR changes | Assay, IR, loss on drying | Dye matched to the orange-red colour | Colour matches; the spectrum does not | Infrared, HPLC | Water on the surface | As-is iron drops while the dried figure holds | Loss on drying next to the assay The pattern to watch is a pair that no longer moves together. Total iron above the ferrous figure suggests an added ferric or elemental source; ferrous iron below a normal total suggests oxidation; iron below the assay with a raised loss on drying suggests water or a diluent. A blend is legitimate when it is declared: the label names both iron sources and the certificate reports each contribution. The defect is the undisclosed blend, not the blend. ## How to write the identity into the specification - “Ferrous fumarate, anhydrous, C4H2FeO4, CAS 141-01-5.” - “Identification by infrared spectrum against a named reference.” - “Assay 97.0–101.0% and iron 31.0–33.0%, both on the dried basis; loss on drying ≤2.0%.” - “Report whether iron is ferrous or total; state the method and the ferric result where agreed.” - “Free fumaric acid by HPLC reported; ≥95% through 40 mesh.” - “Free of added ferric salt, iron oxide and diluent; contaminants and micro as the catalog.” Written this way, the specification tells the laboratory what to measure and the supplier what will fail. “Iron 32%” alone does neither. ## Five questions for the supplier - Is the iron result ferrous iron or total iron, and which method and basis are reported? - What is the assay, and does iron divided by assay sit near the 0.329 the formula predicts? - Does the infrared spectrum match a named reference, and can the spectrum be provided? - What are the loss on drying, particle-size and free-fumaric-acid results for this lot? - Who produced the lot, and does the batch record connect to the same code as the retained sample? Those five answers, taken together, are the identity file. Start at the product hub for the catalog specification, then compare the certificate lines on the COA page and the particle options on the grade page. The ferrous sulfate page covers the salt a substitution would most likely involve, and the methods library explains the IR, XRD and titration techniques. ### 01 What the COA for ferrous lactate actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/ferrous-lactate/coa/ Reviewed: 2026-11-19 The certificate for a ferrous lactate lot reports appearance, identification, iron by complexometric titration, the assay on its stated basis, loss on drying, the heavy-metal panel, microbiology and particle size. The catalog limits are 96.0–101.0% assay and 23.0–24.5% iron, with loss on drying not more than 1.0%. The batch COA is the document that confirms a particular pouch or drum, and the hydrate state is the first thing it has to settle. In one lineThe iron figure and the assay are two views of one salt: the certificate is auditable only when the hydrate, the method and the loss on drying sit beside them. ## The certificate as a test report A certificate is auditable when every row can be repeated. That needs three things per line: what was measured, which method produced the number, and which limit the lot was released against. The header should name the salt as anhydrous ferrous lactate, give the CAS number 5905-52-2, and identify the lot and the pack. Identity, assay, moisture and physical limits · ferrous lactate | Parameter | Method | Release limit | Appearance | Visual | Greenish-white powder | Identification | Ferrous reaction, infrared spectrum and titration | Conforms to the reference | Assay | Complexometric titration | 96.0–101.0% | Iron (Fe) | Complexometric titration | 23.0–24.5% | Loss on drying | Gravimetric | ≤1.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh The appearance line is the only one a reader can check without an instrument, and it is the first that moves when a lot oxidises. It belongs on the sheet even though it is not a number. ## The anhydrous salt, the basis and the hydrate The formula is C6H10FeO6 and the molar mass is 233.98 g/mol, so the theoretical iron fraction of the anhydrous salt is 23.87%. The catalog window of 23.0–24.5% brackets that figure, which is what an anhydrous grade should do. The loss-on-drying limit of 1.0% is part of the same statement: a powder that carries 13% or 19% water is a hydrate, and its iron figure falls to about 20.7% or 19.4%. That is why the hydrate has to be named. Commercial ferrous lactate is often sold as a dihydrate or a trihydrate under the same CAS number, and a certificate that reports 19–20% iron is describing a different specification, with more mass per milligram of iron. Ask which one the quotation covers before comparing iron figures. Because the loss on drying is held to 1.0%, the as-is and dried-basis figures sit within about one point of each other on this grade; the basis still has to be printed. An assay of 96.0% of the salt works out to 22.9% iron by the formula, a tenth below the iron floor; at 101.0% it works out to 24.1%. The two windows are close but not identical, and the small gap is method and basis. That is why both lines belong on the sheet, each with its own method. ## Release limit versus batch result A limit is the boundary the lot was released against; a result is what the laboratory measured. Put both in the row with the method next to them. A column that repeats the range has not reported a measurement. What the result column should contain | Parameter | Release limit | Result column | Assay | 96.0–101.0% | The measured percentage and the basis it is reported on | Iron | 23.0–24.5% | The measured percentage, with the titration named | Loss on drying | ≤1.0% | The measured percentage and the drying conditions | Ferric iron | Agreed limit | Total iron by ICP-OES minus ferrous iron by a redox titration | Heavy metals | Per element | A figure in mg/kg for each element, with the detection limit | Microbiology | Counts and absence | The count and the absence statement for the lot | Particle size | ≥95% through 40 mesh | The measured percentage through the sieve The ferric line is the one the catalog does not set. A complexometric titration binds iron in either oxidation state, so the iron result counts the total and does not show how much of it is still ferrous. Some monographs carry a separate iron(III) limit, for example not more than 0.6% in the JECFA ferrous lactate monograph as of this review. If the application is oxidation-sensitive, agree a ferric limit for this grade; a total-iron window does not report the thing that changes. Contaminant lines need detection limits. “Pb: below 0.5 mg/kg” says what the method could see; a bare “Pb: passes” says nothing that can be compared with another laboratory. The catalog limits are per ingredient; the finished-product calculation is a separate step. ## What moves between batches Iron and assay move with the reaction, the crystallisation and the drying step. On an anhydrous grade, water pickup at the surface is the moisture risk: the as-is figure falls and the powder cakes in the pouch. Colour is the least quantitative line. Greenish-white is the catalog description; a yellow-brown or reddish cast points to ferric iron, and the assay can still pass. Read colour as a prompt to pull the batch record, not as a rejection on its own. Mesh moves with milling and sieving. A lot at the coarse end of “≥95% through 40 mesh” flows differently in a capsule machine from one that is almost all through, and the single percentage hides that spread. ## When to send a lot to a second laboratory Book an outside test when the source is new, when the lot is the first into a regulated market, when the certificate has to prove a form it does not name, or when a result is disputed. The panel: ferrous iron by a redox titration and total iron by ICP-OES on the same sample and the same basis, infrared identity against a named reference, loss on drying, ICP-MS for the heavy-metal panel, and microbiology. Ask the laboratory to state the detection limit and the basis for every line, and send the retained sample, the supplier's certificate and your specification together. A referee result without the lot code proves nothing about the drum in the warehouse. The methods library explains what each technique can and cannot show. ## What to compare between suppliers Six lines to compare between two ferrous lactate certificates | Line | What to ask | Why it matters | Form and hydrate | Anhydrous or hydrate named, with the CAS number | The hydrate sets the iron figure per gram | Iron | Result, method and basis | 19% and 24% iron are not the same powder | Assay | Result and basis | Two figures for one salt have to agree | Loss on drying | Result and conditions | Defines the basis and predicts caking | Ferric iron | Total iron minus ferrous iron | A total-iron window hides oxidation | Traceability | Lot code on certificate, pack and retained sample | An accurate certificate can cover another drum Compare the six lines, not the two iron percentages. The catalog specification is on the ferrous lactate product page; the salt form and its consequences are on the grades page; the ferrous-versus-ferric evidence is on the identity page; release practice is described on the quality page. ### 02 Ferrous lactate grades: anhydrous, hydrate and granulated URL: https://nutrition.rainwoodbio.com/products/minerals/ferrous-lactate/grades/ Reviewed: 2026-11-19 Ferrous lactate is sold in more than one solid form, and the differences are not cosmetic. The catalog grade is the anhydrous salt at 23.0–24.5% iron and loss on drying not more than 1.0%; the dihydrate and trihydrate carry about 20.7% and 19.4% iron under the same CAS number, and a granulated powder is a process variant of the anhydrous material. The form decides the mass per milligram of iron before it decides anything else. In one lineThe hydrate is the grade question: the same CAS number covers salts that differ by up to about 19% water, and the iron figure per gram follows the water. ## A grade is a hydrate and a particle, not a new molecule Every ferrous lactate grade is the same anion and the same ferrous ion. What changes is how much water is bound in the crystal and how the powder has been milled or granulated. The molecular formula of the anhydrous salt is C6H10FeO6; a hydrate adds water to the formula without changing the iron-lactate pair. That makes the hydrate state a specification decision with an arithmetic consequence. Water is mass that carries no iron, so the iron percentage falls as the hydrate rises. It also changes the loss-on-drying result, the flow of the powder and the quantity the formulator weighs for a declared iron dose. The catalog material is anhydrous. Ferrous lactate is often traded as a hydrate, and some monographs are written around that: the JECFA monograph, as of this review, allows up to 18% loss on drying and sets a separate iron(III) limit. A certificate inside that monograph can still describe a hydrate. The iron figure and the loss on drying are what tell the two apart. ## The forms side by side Ferrous lactate forms and the iron each carries | Form | Formula | Molar mass | Iron | Water | Anhydrous (catalog) | C6H10FeO6 | 233.98 | 23.9% theoretical | None bound | Dihydrate | C6H10FeO6·2H2O | 270.01 | 20.7% theoretical | 13.3% | Trihydrate | C6H10FeO6·3H2O | 288.03 | 19.4% theoretical | 18.8% | Granulated anhydrous | As anhydrous | 233.98 | 23.9% theoretical | None bound The theoretical figures are arithmetic from the formula, not batch results. The catalog window of 23.0–24.5% iron can only be met by the anhydrous solid, because the dihydrate and the trihydrate cannot reach it even at 100% purity. A lot at 19–21% iron is therefore a hydrate or a blend, and the quotation has to say which. ## Colour, solubility and the 40 mesh line The anhydrous powder is greenish-white. The hydrate and the anhydrous form are both pale solids, so colour is not a reliable way to tell them apart; the iron figure and the loss on drying are. A yellow-brown cast is a ferric signal in either form. Both forms dissolve in water, and both solutions are acidic and oxidise on standing. Solubility is not the dividing line between the grades; the dividing line is water content and particle size. The catalog grade is ≥95% through 40 mesh, and granulation is available on request where dust and flow matter. Granulation does not change the iron figure, but it changes the bulk density, the flow and the fill-weight consistency on a capsule machine. Particle size is also where a specification can be met on paper and missed in the plant. A single “≥95% through 40 mesh” result does not describe the coarse tail, and the tail decides how the powder runs. ## What the form does to the fill The claim is written as elemental iron; the weigh-up uses the salt. At the catalog midpoint of 23.75% iron, 1 mg of iron needs 4.21 mg of anhydrous ferrous lactate. At the trihydrate's theoretical 19.39%, the same milligram needs 5.16 mg of salt. The hydrate asks for about 23% more mass for the same claim. Salt mass for a label claim · calculated at theory and the catalog window | Iron claim | Anhydrous 23.0–24.5% | Trihydrate 19.4% | 10 mg | 41–43 mg | 52 mg | 14 mg | 57–61 mg | 72 mg | 18 mg | 73–78 mg | 93 mg | 20 mg | 82–87 mg | 103 mg | 30 mg | 122–130 mg | 155 mg A 500 mg capsule filled with the anhydrous grade delivers 115–122.5 mg of iron; the same fill of trihydrate delivers about 97 mg. Those are arithmetic, not fill-weight guarantees; the press trial and the batch certificate decide the final figure. The arithmetic is still the reason a form switch is a new formulation, not a purchasing substitution. A tablet adds compression. The anhydrous powder is fine and needs a binder and a lubricant, and granulation is the usual route when it will not run; the granulating aid then has to be declared. A stick or a drink mix takes either form, because both dissolve, but the hydrate contributes water to a powder blend that is meant to be dry. ## How to write the specification - “Ferrous lactate, anhydrous, C6H10FeO6, CAS 5905-52-2.” - “Assay 96.0–101.0% by complexometric titration, with the basis stated.” - “Iron 23.0–24.5%; theoretical for the anhydrous salt is 23.87%.” - “Loss on drying ≤1.0% (gravimetric); state the drying conditions on the certificate.” - “Identification: ferrous reaction plus infrared comparison with a named reference.” - “≥95% through 40 mesh; granulated on request.” - “Heavy metals and microbiology as the catalog; ferric limit to be agreed.” ## When a different form is the right purchase The hydrate is the right purchase when the process is built on it, the higher mass per dose has been accepted, and the certificate is written as a hydrate. It is the wrong purchase when the label claim has to fit a small capsule or when the specification says anhydrous: the iron figure and the fill weight both move. The anhydrous grade is the wrong choice when the process needs a coarse, free-flowing granule and the milled powder will not run; that is a granulation order, not a different salt. No ferrous lactate grade is the right answer when the label must name a different salt. The comparison with ferrous gluconate is on the level-four page; ferrous gluconate is covered on its product page, and the chelate option on the iron bisglycinate page. Name the form, the iron figure and the mesh on the purchase order. The product hub carries the catalog line; the COA page shows how the hydrate and the basis are reported; the stability page covers what the water does in storage. ### 02.1 Ferrous lactate vs ferrous gluconate: elemental iron, solubility and the fill URL: https://nutrition.rainwoodbio.com/products/minerals/ferrous-lactate/grades/ferrous-lactate-vs-gluconate/ Reviewed: 2026-11-19 Ferrous lactate carries 23.0–24.5% elemental iron and ferrous gluconate 11.8–12.5%, so a label claim takes roughly half as much lactate as gluconate. Both are water-soluble ferrous salts with acidic solutions, and both oxidise. The choice turns on the iron figure, the fill weight, the colour and taste the matrix can carry, and the ingredient name the label must use. In one lineLactate carries about 24% iron and gluconate about 12%, so the same claim takes roughly half the salt mass, and the fill, the solution and the label follow from that. ## The iron figure is the first difference Ferrous lactate is C6H10FeO6 at 233.98 g/mol, 23.87% iron in theory and 23.0–24.5% in the catalogue. Ferrous gluconate is C12H22FeO14·2H2O at 482.17 g/mol, 11.58% iron as the dihydrate and 11.8–12.5% on the dried basis. The gluconate is the larger molecule: two lactate-type ligands and two water molecules around the same ferrous ion, so the iron is a smaller share of the mass. Ferrous lactate and ferrous gluconate side by side | Property | Ferrous lactate | Ferrous gluconate | Formula | C6H10FeO6 | C12H22FeO14·2H2O | Molar mass | 233.98 | 482.17 | Iron, catalogue | 23.0–24.5% | 11.8–12.5% (dried basis) | Iron, theory | 23.87% | 11.58% as the dihydrate | Loss on drying | ≤1.0% | ≤8.0% | Colour | Greenish-white | Greyish-yellow to greenish-yellow | Water solubility | Soluble; acidic solution | Soluble; pH 3.0–5.0 at 5% | Catalogue mesh | ≥95% through 40 mesh | ≥95% through 80 mesh The two iron windows do not overlap: no gluconate lot meets the lactate figure, and no anhydrous lactate lot meets the gluconate window. That is the salt, not the purity, and the names cannot be swapped on a purchase order without recalculating the fill. ## Solubility and the solution Both salts dissolve in water, and both give acidic solutions, so solubility does not separate them in the way it separates a soluble salt from ferrous fumarate. The practical differences are the dissolved solids at a given iron concentration, the colour and the acid load. A lactate solution carries less organic mass for the same iron, which matters in a concentrated stock or a small stick pack. Both solutions darken towards yellow-brown as the ferrous ion oxidises, and both can throw a basic ferric precipitate if the pH rises. The gluconate catalogue sets pH 3.0–5.0 at 5%; the lactate catalogue does not, so ask for a pH and measure it in your own vehicle if the matrix is pH-sensitive. Colour is a practical difference. The gluconate powder is already greyish-yellow, while the lactate is greenish-white, so the same brown shift is easier to read against the lactate, and a cast matters in a pale drink or a white tablet. ## What the difference does to the fill At the catalogue midpoints, 1 mg of iron needs 4.21 mg of lactate and 8.23 mg of gluconate. The ratio is about 0.51, and it holds across the claim range, so the lactate fill is roughly half the gluconate fill for the same declared iron. Salt mass for a label claim · calculated at the catalogue windows | Iron claim | Ferrous lactate 23.0–24.5% | Ferrous gluconate 11.8–12.5% | 10 mg | 41–43 mg | 80–85 mg | 14 mg | 57–61 mg | 112–119 mg | 18 mg | 73–78 mg | 144–153 mg | 20 mg | 82–87 mg | 160–169 mg | 30 mg | 122–130 mg | 240–254 mg A 500 mg capsule filled with lactate delivers 115–122.5 mg of iron; the same fill of gluconate delivers 59–62.5 mg. For a 20 mg claim the lactate needs about 85 mg of powder and the gluconate about 165 mg, so the lactate leaves more room in the capsule for a second active, and the gluconate asks for about twice the fill or a lower dose. In a tablet, both are fine powders that may need granulation, and the granulating aid adds mass that carries no iron. The gluconate's higher loss-on-drying limit also puts more water in the fill, which matters for dry granulation. ## Oxidation is common to both, with different timing Both salts are ferrous and both oxidise, so the choice is not between a stable salt and an unstable one. The lactate's tighter moisture limit leaves a smaller reservoir of water to start with; the gluconate's water is bound in the crystal, but drying or a failed pack can move it. In a dry blend, the lactate's 1.0% limit is the easier specification to hold, and the gluconate's 8.0% limit allows a wider moisture window. In solution, both need low dissolved oxygen, an acidic pH and protection from light. The gluconate's larger organic load and its stated pH window belong in the matrix trial. Neither salt should be called stable without the pack, the matrix and the time. The ferrous ion is a redox-active metal, and a blend that carries a sensitive oil, a vitamin or a pigment beside either salt can discolour. The salt choice changes the mass of iron per gram of blend, and so the size of that effect. ## The label and the ingredient name The label names the salt, not the element: “ferrous lactate” and “ferrous gluconate” are different ingredient names, and the elemental iron figure is the arithmetic that follows. A switch from one to the other is a new ingredient declaration, a new quantitative ingredient statement and, in a supplement, a new Supplement Facts line. Regulatory status is a separate file. In the EU, the permitted forms for food supplements are listed in Annex II of Directive 2002/46/EC, and the buyer's team checks the current text; in the US, the dietary-supplement route turns on the ingredient's basis, and the label and the claim are reviewed separately. The additive route is yet another file; ferrous lactate has a colour-retention use in some markets, where the limit is written as total iron per kilogram of food rather than as milligrams of salt. The hydrate state belongs on the specification, and the label should match it: a gluconate dihydrate and an anhydrous lactate are different declarations. ## When to choose which Choose the lactate when the fill is tight, when the label can take a paler powder, and when the formula wants a smaller mass of salt for the same iron. Choose the gluconate when the process and the label are already built around it, when its dihydrate is the qualification basis, or when the market file names it. Neither is a drop-in for the other. The mass changes by about a factor of two, the ingredient name changes, and the moisture and pH windows change. A switch needs a new specification, a new fill weight, a matrix trial and a label check. This page is the level-four companion to the grades page. The catalogue line is on the ferrous lactate product page; the other salt is on the ferrous gluconate page; the chelate option is on the iron bisglycinate page; the analytical methods are in the methods library; the release workflow is on the quality page. ### 03 Ferrous lactate stability: oxidation, moisture and the pack URL: https://nutrition.rainwoodbio.com/products/minerals/ferrous-lactate/stability/ Reviewed: 2026-11-19 Ferrous lactate is stable as a dry powder in a sealed pack and loses its ferrous state when moisture, heat and air reach it. The powder darkens from greenish-white towards yellow-brown as iron(II) becomes iron(III), and the change can happen while the iron assay still passes. The pack, the storage condition and the matrix set the shelf life, not the certificate. In one lineFerrous iron is the unstable part: moisture, heat and air move it to ferric, and the pack decides how fast. ## The powder: moisture, caking and colour The catalog limit is loss on drying not more than 1.0%. That is a release gate, not a storage allowance. An opened pouch takes water from the air; the powder cakes, the as-is assay falls, and the surface layer oxidises first. The colour shifts from greenish-white towards yellow or brown, and at that point the total iron figure may be unchanged. The anhydrous grade is hygroscopic enough to need the original pack. A foil pouch is a moisture and light barrier, and the seal is the weak point; a pouch that has been folded over is not sealed in the same sense as a heat-sealed one. Transfer a long-held remainder to a smaller opaque container that closes properly. Heat raises the rate of both moisture pickup and oxidation. A cool, dry store is the practical requirement; a hot loading bay or a humid warehouse floor is not. After cold storage, let the sealed pack reach room temperature before opening so that condensation does not form on the powder. ## The solution: acidic and quick to oxidise Ferrous lactate dissolves in water, and the solution is acidic. In solution, oxygen, light, heat and pH act at once. The ferrous ion oxidises to ferric, the colour turns from pale green towards yellow-brown, and a basic ferric salt can precipitate and leave a haze or a sediment. The change is visible long before the label claim is affected, which makes appearance a useful early check. A ready-to-drink process adds heat through pasteurisation or hot fill, and dissolved oxygen at the fill. A powder stick avoids both because the consumer adds water at the point of use. If a liquid is unavoidable, keep dissolved oxygen low, protect the bottle from light, and validate the hold time before filling. The matrix pH belongs in the validation: an acidic matrix holds the ferrous ion better than a neutral one, where hydrolysis and precipitation are faster. A reducing agent can hold the iron in the ferrous state. Ascorbic acid is the usual one, and it is itself oxidised, so the protection is finite and has to be measured in the finished formula rather than assumed from the ingredient list. ## What drives the change Factors that move ferrous lactate during storage | Factor | Effect | Control | Oxygen | Iron(II) to iron(III); colour darkens | Sealed pack, low headspace, low dissolved oxygen | Moisture | Caking; higher loss on drying; faster oxidation | Foil pouch, closed liner, dry store | Heat | Faster oxidation and moisture pickup | Cool store; cool process | Light | Surface colour change | Opaque pack; dark store | pH | Hydrolysis and precipitation in solution | Keep the matrix acidic; validate the pH | Other actives | Iron can catalyse oxidation in the blend | Segregate or stabilise; test the blend These factors work together. A warm, humid, bright store is worse than three separate exposures, and a neutral solution in clear glass combines all of them. The useful question is not whether ferrous lactate is stable, but in which pack, at which condition, for how long. ## A stability protocol for the ingredient A protocol fixes the pack, the condition, the time points and the tests. The warehouse is covered by long-term storage at 25 °C/60% relative humidity and an intermediate condition at 30 °C/65%; the pack is stressed at 40 °C/75% for the accelerated arm. Add a light-exposure arm, because a dark incubator cannot show a photolytic change. Test iron by complexometric titration, ferrous iron by a redox method, loss on drying, appearance and microbiology at each point. The ferrous figure is the one that moves first; a total-iron result alone can sit flat while the ferrous fraction falls. Report the individual results, not only a pass statement, and tie the report to the pack and the lot family. For a blend or a liquid, repeat the work in the matrix. A bulk-powder result does not transfer to a capsule, a stick pack or a drink. The excipients, the process heat and the pack each change the rate. ## The finished formula changes the answer Water activity is low inside a capsule or tablet, but the shell and the excipients can still hand moisture to the salt. Check loss on drying at release and after storage, and check the fill appearance. A tablet compressed from a fine powder may need granulation, and the granulating aid then has to be declared. A powder blend is the format where iron shows its second role: the ferrous ion is a redox-active metal, and it can accelerate the oxidation of other ingredients in the same pouch. A blend that carries a sensitive oil, a vitamin or a pigment beside ferrous lactate may discolour or lose potency even when the iron result is inside its window. Segregate the iron in a separate sachet, or stabilise the blend and test it as a blend. A liquid combines oxygen, heat, light and pH. The ingredient's bulk stability is the starting point, not the answer, and an overage is a label and stability decision rather than a repair for a pack that lets air in. ## How the shelf life is set There is no single shelf-life number for ferrous lactate here, because the answer depends on the pack and the storage condition. Whatever retest period is assigned belongs on the specification and rests on data generated in that pack. A figure quoted without a pack, a condition and a test panel is a claim rather than a shelf life. After the retest period, re-assay the retained sample before extending use, and check the ferrous figure as well as the total iron. Do not carry a drum figure across to a repacked pouch. The MOQ page gives the pack sizes and the dispatch window; the COA page lists the release tests; the product hub carries the catalogue line; the analytical procedures are in the methods library; the quality page shows how the release file is kept. ### 04 Ferrous lactate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/ferrous-lactate/moq/ Reviewed: 2026-11-19 Ferrous lactate is supplied with a 1 kg minimum, packed as a 1 kg foil pouch, with a 25 kg fiber drum as the bulk unit. Lead time is 1–7 days for the standard pack. A firm quotation needs the form, the iron figure, the quantity and pack, the destination and Incoterm, the documents and the intended market. In one lineThe first order is a pack with a lot code: one kilogram for the trial and the retained sample, a drum for production. ## Why the minimum is 1 kg A 1 kg pack covers a bench trial, a retained sample and an independent ferrous-iron test. It is also small enough to ship as a parcel, which matters when a formulator needs material before the production plan is fixed. The pack carries a lot code; it is not a scoop from a drum. Below 1 kg, the material is usually split from a larger lot and repacked, which adds handling and loses the original pack identity. The 25 kg drum is the production unit: it reduces handling per kilogram but commits inventory and a longer storage period for a hygroscopic, oxidation-sensitive powder. The minimum is a pack decision, not a volume incentive. ## Packs and formats Standard ferrous lactate packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, retained sample, small batch | Moisture and light barrier; close it after use | Fiber drum | 25 kg | Production | Liner inside; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Firmer granule; iron figure unchanged | Custom mill | On request | Blend or tablet feed | Mesh change; new particle-size line The catalog form is a 40 mesh powder: ≥95% through 40 mesh. Granulation or a different mesh is a process variant with its own particle-size line, not a different chemistry, and it should be agreed before the quotation because it may move the lead time. ## Lead time and dispatch Orders for the standard pack are quoted at 1–7 days from confirmation. Picking, paperwork and dispatch sit inside that window; freight transit, customs clearance and the customer's own release do not. A granulation or a non-standard pack adds time, which the quotation should show as a separate line. Book against a dispatch date rather than the lead-time phrase. A drum may travel on a pallet and a pouch as a parcel; the Incoterm decides who books the freight and who clears the entry. The documents travel with the lot, not after it. ## What a quotation needs Six items make a quotation firm enough to compare: - Product and form. Ferrous lactate, anhydrous, CAS 5905-52-2, with the hydrate state written out. - Specification. Assay and basis, iron figure, loss on drying, mesh, heavy metals and microbiology. - Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated or milled variant. - Destination and Incoterm. The delivery country, the named place and the trade term that applies. - Documents. COA, specification and SDS, plus the declarations the importer must hold. - Use and market. A supplement, a food or another use, and the country where the finished product will be sold. A quotation that leaves out the hydrate state or the market is incomplete. The same CAS number covers an anhydrous salt at about 24% iron and a hydrate at about 19%, and the two are not interchangeable in a fill calculation. Commercial terms are stated on the quotation, not on this page. ## The sample is a lot, not a demonstration The 1 kg pack is the qualification sample. Test iron, ferrous iron, loss on drying, mesh and microbiology before scaling up, and retain a portion of that same pack. The lot code should run through the sample, the certificate and the quotation; a sample with no lot behind it is a demonstration, not a qualification. If the project needs less for a bench trial, discuss it before ordering. A split from a bulk lot is a repack with its own traceability, and it should be documented as such. Do not assume that a bench sample and the production drum come from the same lot. ## Terms to settle before the first order The quotation carries the commercial terms, the Incoterm, the pack, the lead time and the document list. The quality terms belong alongside: which specification revision applies, a COA for each lot, the retained sample, the retest period and the route for a change. Settle these in a quality agreement before the first production order, not after it. Returns and replacements follow the quotation and the quality agreement. A lot that fails the agreed specification is handled through the retained sample and a joint re-test, not through a photograph of the powder. Ask who pays for the referee test and which laboratory both sides accept. Pack sizes and the catalogue line sit on the product hub; the release tests are on the COA page; the destination file is on the compliance page; the MOQ entry defines the term, and the quality page covers release and retained samples. ### 05 The regulatory file for ferrous lactate URL: https://nutrition.rainwoodbio.com/products/minerals/ferrous-lactate/compliance/ Reviewed: 2026-11-19 Ferrous lactate is an iron salt, and the regulatory file for it is built around the exact salt, the hydrate, the daily dose and the destination. The catalog specification and the lot certificate describe the material; the buyer's regulatory team confirms the route for the market and the finished product. This page lists the framework, the limits and the documents that belong in the file. In one lineThe salt, the hydrate and the dose decide the route, and the file has to show all three for the destination. ## What the file contains Four questions organise the file: what the material is, and which specification revision is being bought; which lot is being released, and what its certificate says; which limits and label rules the finished product must meet; and what happens when the source, the process or the pack changes. The lot certificate covers the batch, the technical data sheet covers the specification, and the safety data sheet covers handling. None of the three settles the route on its own. Keep the allergen, GMO, origin and residual-solvent statements in the same place, with version numbers, so the file reads as one document rather than a folder of undated files. For an iron salt there is a second layer. The same salt can be used as a nutrient and, in some markets, as a food additive. Those are different routes with different maximum levels and different label rules, and the file has to say which one the finished product relies on. Narrowing the iron figure to one salt and one hydrate is the first step, because a limit written for a different form does not apply. ## European Union In the EU, the general framework is Regulation (EC) No 178/2002 on general food law, with the labelling rules of Regulation (EU) No 1169/2011 and the contaminant limits of Regulation (EU) 2023/915. Food supplements are also governed by Directive 2002/46/EC, whose Annex II lists the permitted vitamin and mineral forms; the buyer's team checks that the named form and the current text cover the product. The EU harmonises the permitted forms, not a single maximum amount of iron in a supplement. Member State rules differ, and the target market has to be named before the dose is fixed. The additive route is separate: where ferrous lactate is used for colour retention rather than as a nutrient, the maximum is written as total iron per kilogram of food, not as milligrams of the salt. Both routes need the same lot evidence and a different label review. “As of this review” is the right qualifier for every citation on this page; the consolidated text is the reference, not a summary. ## United States In the US, a dietary supplement is regulated under the Dietary Supplement Health and Education Act and the cGMP rule in 21 CFR 111, with the Supplement Facts panel under 21 CFR 101.36. The ingredient's status for use in a supplement rests on a listed food additive, a GRAS basis or an old dietary ingredient, and the supplier should be able to name the basis it relies on. The buyer's regulatory team confirms that the basis covers the finished product and the claim. A conventional food uses a different route, and the iron level and the serving size have their own rules. The label and the claim are reviewed separately from the certificate; a COA does not approve a claim. ## Great Britain and Northern Ireland The UK is two files, not one. Great Britain works to the GB register and GB labelling rules, while Northern Ireland stays inside the EU framework. Which of the two governs a shipment depends on the destination, and the buyer's team records that decision in the file rather than leaving it to the invoice. ## Contaminants and limits The contaminant panel is a calculation on the finished product, not only a drum result. Use the table as the starting point, then confirm the destination text and the daily dose, which decide the final limit. Contaminant limits to confirm for the finished product | Element | Starting-point limit | Evidence to keep | Lead (Pb) | 3.0 mg/kg, supplement basis | Lot figure, method, limit and the dose calculation | Cadmium (Cd) | 1.0 mg/kg, supplement basis | Lot figure and any category exception | Mercury (Hg) | 0.10 mg/kg, supplement basis | Lot figure and the method used | Arsenic (As) | Agreed customer or market limit | The agreed limit and method on the certificate Iron itself is the active component, and the dose decides whether the file holds together. A 20 mg iron claim takes about 82–87 mg of the anhydrous salt at the catalog window. A lead result of 3.0 mg/kg in the salt therefore arrives at about 0.5 mg/kg in a 500 mg capsule that carries 85 mg of the salt. Run that arithmetic before accepting a limit, because a limit written on the ingredient and a limit written on the finished product are not the same number. The same calculation applies to the additive route, where the maximum is expressed as total iron in the food. The salt mass per milligram of iron has to be converted before the two numbers can be compared, and the hydrate changes the conversion. ## Label and claims The label names the ingredient in the form the destination requires. For this salt the name should carry “anhydrous” or the hydrate, because the iron figure per gram depends on it, and the quantitative ingredient declaration is read against the elemental iron the formula delivers. Nutrient content claims are regulated separately: in the EU, Regulation (EC) No 1924/2006 and its annexes set the conditions for terms such as “source of” and “high in”, and the finished product's iron content decides eligibility. The brand's regulatory reviewer confirms that the wording, the form and the market line up. No disease-related claim is made for this ingredient, and the certificate supports none. ## The documents in the file - Specification with the form, assay, iron, loss on drying, mesh and the agreed ferric limit. - COA per lot, with methods, detection limits and the basis. - Technical data sheet and safety data sheet in the destination language where required. - Allergen, GMO, origin and residual-solvent statements, dated and versioned. - Contaminant and microbiology results, with the finished-product calculation. - Change-control statement covering source, process, hydrate and pack. ## Checklist before the first order - Specification and quotation both name the anhydrous salt, its CAS number and the pack. - The iron figure, its basis and the label arithmetic agree. - Written confirmation of the route comes from the buyer's regulatory team. - Contaminant figures are expressed per finished dose, not only per kilogram of salt. - The label and any nutrient claim were reviewed against the destination rules. - Source, process, hydrate and pack have a change-notification clause. The catalog specification sits on the ferrous lactate product page; the lot evidence is on the COA page; the analytical tests are on the identity page; the release file is described on the quality page; the framework notes are in the EU regulatory note. ### 06 How we prove a ferrous lactate lot is the ferrous salt URL: https://nutrition.rainwoodbio.com/products/minerals/ferrous-lactate/identity/ Reviewed: 2026-11-19 Proving a ferrous lactate lot takes four kinds of evidence: the declared name and hydrate, the ferrous reaction and the infrared spectrum, the iron figure with its basis, and the physical and contaminant limits. Only the iron figure puts a number on the metal, and it cannot prove the anion or the water. The four together are the identity. In one lineIdentity is the ferrous reaction and the infrared spectrum for the salt, the iron titration for the metal, and the lactate-to-iron ratio that rules out a second iron source. ## Four questions, four kinds of evidence What each identity layer proves and what it cannot | Question | Evidence | What it establishes | What it cannot | Is the material named? | Name, hydrate, CAS, formula | The file is about the right substance | Anything about the drum | Is the ion ferrous? | Ferrous reaction and infrared spectrum | The oxidation state and the lactate ligand | How much iron is present | How much iron? | Complexometric titration | The iron content | The water, the hydrate and any diluent | Is the ratio right? | Lactate by HPLC with iron | The stoichiometry of the salt | Nothing about water or an inert carrier | Is it fit to ship? | Loss on drying, mesh, metals, micro | Conformity to the physical limits | Identity, which needs the rows above The ferrous reaction is the simple one: an aqueous solution gives a dark blue precipitate with potassium ferricyanide, which shows the ferrous ion and not the anion. The infrared spectrum identifies the lactate: a carboxylate band near 1600 cm−1 and a broad hydroxyl band near 3400 cm−1, compared with a reference rather than read band by band. The reaction proves the oxidation state, the spectrum proves the ligand. ## The ratio: iron against lactate The anhydrous salt is 76.13% lactate and 23.87% iron, a mass ratio of 3.19 to 1. The ratio is fixed by the formula and it does not move with hydration: in the dihydrate the iron falls to 20.68% and the lactate to 65.97%, but the two stay in the same 3.19 proportion, and the water accounts for the rest. Report the lactate by HPLC and the iron by titration on the same sample. What the ratio catches is a second iron source. Add iron oxide, ferric lactate or another ferrous salt and the iron rises against the lactate; add lactic acid or a lactate salt and the lactate rises against the iron. What it does not catch is water or an inert carrier, because both fractions fall together and the ratio holds. The mass balance does that job: iron plus lactate plus loss on drying should approach 100%, and the gap is the diluent or an error. The formula also links the two catalog windows. At an assay of 96.0% the iron works out to 22.9%, and at 101.0% it works out to 24.1%, which is the shape of the 23.0–24.5% window. The small differences are method and basis, and the certificate should state both. ## Infrared, diffraction and the solid state The infrared spectrum is the routine identity: it shows the lactate carboxylate and hydroxyl bands and is compared with a reference. It does not measure the iron, and it does not separate the anhydrous salt from a hydrate with confidence, because the water and hydroxyl bands overlap. X-ray diffraction answers the hydrate question. The anhydrous salt and the dihydrate and trihydrate have different lattices, so a pattern compared with a reference can show which solid is present. It can also show a crystalline ferric phase such as goethite above its detection limit; it will not see amorphous ferric hydroxide. XRD is not a routine release test here, and a certificate that reports “XRD conforms” without the pattern and the reference has added little. Ask for the reference spectrum or pattern, the detection limit and the sample preparation. The FTIR note and the XRD note explain what each technique supports. ## What adulteration looks like Routes for ferrous lactate and the tests that show them | Route | What moves | Test that shows it | Hydrate sold as anhydrous | Iron and lactate fall together; loss on drying rises | Loss on drying, mass balance, XRD | Second iron source | Iron rises against lactate | Lactate-to-iron ratio; total iron against titration | Lactate or lactic acid spike | Lactate rises against iron | Lactate-to-iron ratio; pH | Inert carrier | Both fractions fall; ratio holds | Mass balance; IR for a foreign spectrum | Oxidised lot | Ferrous falls; total iron holds; colour darkens | Redox titration against total iron The pattern repeats in every row: one figure shifts while its partner holds. That is why the numbers have to be read in pairs, and why a certificate with an iron percentage alone has answered one of the five questions. ## How to write the identity specification - “Ferrous lactate, anhydrous, C6H10FeO6, CAS 5905-52-2.” - “Identification: ferrous reaction and infrared spectrum against a named reference.” - “Iron 23.0–24.5% by complexometric titration; assay 96.0–101.0% with the basis stated.” - “Lactate by HPLC reported; the lactate-to-iron ratio to be consistent with the salt.” - “Loss on drying ≤1.0%; ≥95% through 40 mesh.” - “Ferric iron to be agreed; no added ferric salt, iron oxide or diluent.” ## Five questions for the supplier - Is the lot anhydrous or a hydrate, and what are the iron figure and the loss on drying? - Can you provide the infrared spectrum against a named reference, not only a conformity statement? - What is the lactate result by HPLC, and does its ratio to iron match the salt? - Which titration was used for iron, and does it count ferric iron as well? - If the lot is disputed, will you accept a joint re-test on the retained sample? Five direct answers make an identity file; a single iron percentage does not. The product hub carries the catalog specification; the COA page shows where each figure sits; the grades page compares the hydrates; the ferrous gluconate page is the parallel file for the other soluble ferrous salt; the quality page describes release. ### 01 What the COA for ferrous sulfate heptahydrate actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/ferrous-sulfate/coa/ Reviewed: 2026-11-19 The certificate for a ferrous sulfate heptahydrate lot reports appearance, identification, assay by titration, elemental iron, water by Karl Fischer, the heavy-metal panel and microbiology, with the hydrate and the CAS number in the header. Those figures are only comparable when the water result sits beside them: the heptahydrate is 20.09% iron and 45.36% water by formula, so a lot that has lost or gained water reads differently on every line. The values below are the catalog specification; the batch COA confirms one pouch or drum. In one lineThe iron figure only means something beside the water figure: the heptahydrate is 20.09% iron and 45.36% water by formula, and both move when a lot dries or oxidises. ## Reading the certificate line by line A certificate earns trust when another laboratory could repeat every line. The header names the hydrate, the CAS number, the lot and the pack. Each row then gives the test, the method, the release limit and the result. “Conforms” can be a real result for an identity test, provided the reference is named. Assay and iron are numbers, and both belong on the same basis. The water line makes the other two readable. Identity, assay, iron and water · ferrous sulfate heptahydrate | Parameter | Method | Release limit | Appearance | Visual | Pale blue-green crystals or powder | Identification | Infrared spectrum and titration | Conforms to reference | Assay (as heptahydrate) | Complexometric titration | 99.0–101.0% | Iron (Fe) | Complexometric titration | 19.5–20.5% | Water | Karl Fischer titration | 45.0–48.0% | Heavy metals (Pb, As, Cd, Hg) | ICP-MS | Pb ≤3, As ≤2, Cd ≤1, Hg ≤0.1 mg/kg | Microbiology | APC and pathogen screen | Aerobic count ≤1,000 cfu/g; yeasts and moulds ≤100 cfu/g; E. coli absent; Salmonella absent ## The hydrate basis, and why water is not a contaminant Ferrous sulfate heptahydrate is FeSO4·7H2O at 278.01 g/mol. Iron is 55.85 ÷ 278.01 = 20.09% of the formula, and water is 126.11 ÷ 278.01 = 45.36%. The 45.0–48.0% water window and the 19.5–20.5% iron window describe the same crystal from two directions. The upper water figure allows a little surface moisture; the lower figure catches a lot that has dried out in storage. The assay is expressed on the hydrate as sold, not on a dried basis. If a laboratory reports iron on a dried basis, the conversion is 20.09 ÷ (1 − 0.4536) = 36.76%, which is the iron content of the anhydrous salt. That figure belongs to a different article. A dried ferrous sulfate at about 31% iron is not this material with less water on the certificate; it is a separate specification with its own CAS number and fill weight. Karl Fischer measures total water: crystal water plus surface water. A reading of 44.0% falls below the window and points to efflorescence. A result of 49.0% sits above it and points to moisture pick-up. Neither is a purity failure on its own, but both change the iron delivered per gram of powder. The capsule is filled on the powder weight and the label is written on the iron weight, so the two have to be reconciled before the batch record is signed. ## Release limit versus batch result The limit is the boundary for release; the result is the number the laboratory obtained. Both belong on the page, with the method beside them. What the result column should contain · ferrous sulfate heptahydrate | Parameter | Release limit | Result column | Assay | 99.0–101.0% | A measured percentage, with the titration method | Iron | 19.5–20.5% | A measured percentage and the basis | Water | 45.0–48.0% | A measured percentage by Karl Fischer | Identification | Conforms to reference | The reference named, plus the spectrum | Contaminants | Per element | A measured mg/kg figure for every element named Each contaminant line needs a detection limit. A reported “Pb <3 mg/kg” means the method stopped at 3; a figure such as 0.4 mg/kg means the element was actually measured. The catalog ceilings for lead, cadmium and mercury match the EU limits for supplements, so a finished product has no room for a second source of those metals. Arsenic is a customer limit because the EU has no general maximum for it in supplements. The ferric figure is usually missing. The complexometric assay measures total iron after sample preparation; it does not separate Fe2+ from Fe3+. Request a redox titration for ferrous iron alongside a total-iron result, then compare the two. A lot can pass the iron window while part of the iron has already oxidised. ## What moves between batches Water moves first. Drying removes surface water and can begin to remove crystal water; a dry store can effloresce the crystals; a humid store adds water back. Iron on an as-is basis moves with the water, so two powders with the same dried-basis assay can deliver different amounts from the same scoop. Colour moves from pale blue-green towards yellow-brown as ferrous iron oxidises to ferric. The shift can begin at the surface of a crystal or in a damp layer inside a drum, and the assay can still pass while the appearance has changed. A colour shift should send you to the batch record for the ferric figure; it is not a reason to reject on sight. A batch at the top of the iron window and the top of the water window is an edge combination, and the two lines should be read together. ## When an outside test is worth ordering An outside laboratory is worth ordering for a new source, a first regulated shipment, a label that names the heptahydrate, or a result the supplier disputes. The useful panel closes the gaps the routine sheet leaves: ferrous iron by redox titration, total iron by ICP-OES, water by Karl Fischer, sulfate by gravimetric barium sulfate or ion chromatography, ICP-MS for the metal panel, and microbiology. Add X-ray diffraction when the hydrate or the crystal form is in question. The laboratory should report a detection limit and a basis for each line; the sample submitted should be the retained one, accompanied by the supplier's certificate and the agreed specification. ## What to compare between suppliers Six certificate lines to compare across suppliers | Line | What to ask | Why it matters | Hydrate and CAS | Heptahydrate named, CAS 7782-63-0 on the sheet | The hydrate controls the iron and water arithmetic | Iron | The measured figure, its basis and the method | As-is and dried-basis numbers do not mean the same thing | Water | The measured percentage and the method | Fixes the hydrate and flags caking risk | Ferric (Fe3+) | The gap between total and ferrous iron | The routine assay may not see oxidation | Sulfate | A result by gravimetry or ion chromatography | Shows the counter-ion, not only the metal | Traceability | A lot code linking certificate, pack and retained sample | A correct certificate can still describe a different drum Read across the six lines, not just the two iron figures. The catalog data are on the ferrous sulfate product page; the tests that distinguish heptahydrate from dried grade are described on the identity page; the release sequence is set out on the quality page; the titration method appears in the complexometric method note and the diffraction check in the XRD note. ### 02 Ferrous sulfate grades: heptahydrate, dried and the physical form URL: https://nutrition.rainwoodbio.com/products/minerals/ferrous-sulfate/grades/ Reviewed: 2026-11-19 Ferrous sulfate is bought as the heptahydrate, at 20.09% iron and 45.36% water by formula, or as a dried grade at roughly 30–33% iron and about 10% water. The choice changes the mass per dose, the water load in the blend and the name on the label before it changes anything else. Crystal and powder are physical grades of the same hydrate: the mesh and the flow decide which one a capsule line can run. In one lineThe grade is a water decision before it is an iron decision: the heptahydrate carries about 45% water and 20% iron, the dried grade about 10% water and 31% iron, and the fill weight follows. ## Why the same salt comes in three grades All three grades are ferrous sulfate; they differ in how much water is bound to the crystal. The heptahydrate is FeSO4·7H2O, the form that crystallises from water and the form most solution processes start with. The dried grade is a commercial article made by removing part of that water, usually to the monohydrate or a mixture of hydrates. The anhydrous salt has no crystal water at all and is the most hygroscopic of the three. The grade is not a purity label. A 99.0% heptahydrate and a 99.0% dried grade are both high-purity articles, but one kilogram of each delivers about 201 g and about 310 g of iron. “Dried” is the word that causes most of the confusion. It does not mean anhydrous, and it does not mean the heptahydrate with a lower water result. It is a separate article with its own CAS number, its own iron window and its own water window. A buyer who orders “ferrous sulfate” without the grade has left the most important line of the specification open. ## The three chemical grades side by side Ferrous sulfate heptahydrate, dried and anhydrous compared | Property | Heptahydrate | Dried grade | Anhydrous | Formula | FeSO4·7H2O | FeSO4·H2O, nominal | FeSO4 | CAS number | 7782-63-0 | 13463-43-9 | 7720-78-7 | Iron content | 20.09% by formula; catalog 19.5–20.5% | About 30–33%; commonly 30.0–32.0% | 36.76% by formula | Water content | 45.36% by formula; catalog 45.0–48.0% | About 10–13% | None bound; picks up moisture readily | Appearance | Pale blue-green crystals or powder | Gray-white to off-white powder | Off-white to gray powder | Solubility in water | About 26 g per 100 mL at 20 °C | Soluble; dissolves more slowly | Soluble, with hydrolysis and heat | Typical use | Solutions, syrups, crystal grades | Dry capsules, tablets, blends | Specialty dry systems The dried article may be supplied as the monohydrate, CAS 17375-41-6, or as a partly dehydrated solid under the dried CAS number. The supplier should state which one is on the certificate, because the iron and water figures are the only way to tell them apart in routine testing. ## Crystals, powder and what the line can run The heptahydrate is pale blue-green and crystalline. The catalog powder is specified at 40 mesh; crystals are available on request. A crystal dissolves slowly but cleanly, which suits a solution process that has time and agitation. A powder disperses faster and blends more evenly into a dry mix, but it also generates dust and can cake when the water activity of the room is high. The heptahydrate is efflorescent: in dry air it gives up crystal water, and the surface of a crystal can turn dull or powdery. In moist air the ferrous iron oxidises and the colour moves towards yellow-brown. Both changes are visible, and neither is a grade change. The dried grade is less water-laden but still hygroscopic; it cakes less than the heptahydrate in a dry blend, and it still needs a sealed pack. Bulk density and flow differ between a crystal and a milled powder, and they differ between suppliers. If the capsule or tablet line has a fixed volume, ask for the bulk density and the particle-size distribution rather than the mesh figure alone. ## Fill weight and the iron declaration The arithmetic starts with the iron figure, not the salt weight. At 20.09% iron, 20 mg of elemental iron is 20 ÷ 0.2009 = 99.6 mg of heptahydrate. At 31% iron, the same 20 mg is 64.5 mg of dried grade, and at 36.76% it is 54.4 mg of anhydrous salt. At 40 mg of iron the masses become about 199 mg, about 129 mg and about 109 mg. These are arithmetic examples, not a dose recommendation. The water that comes with the heptahydrate is the difference the formulator feels. A 20 mg iron dose from the heptahydrate carries about 45 mg of water into the capsule; the dried grade carries about 7–8 mg. In a tablet, that water can migrate into the granulation and change the compact; in a capsule, it can soften the shell or react with a moisture-sensitive active. In a dry blend, it changes the water activity of the whole mix. The label declares elemental iron, while the purchase order is written in salt. The two have to be connected by the iron figure on the certificate, not by the word “ferrous sulfate”. A formula that assumes 20% iron for a dried grade will weigh about 55% more powder than needed; one that assumes 31% for a heptahydrate will under-deliver iron by about a third. ## What to write into the specification - “Ferrous sulfate heptahydrate, CAS 7782-63-0, FeSO4·7H2O.” - “Assay 99.0–101.0% by complexometric titration; iron 19.5–20.5%.” - “Water 45.0–48.0% by Karl Fischer titration.” - “Identification by infrared spectrum and titration; report the reference.” - “Particle size ≥95% through 40 mesh for the powder; crystals on request.” - “Heavy metals and microbiology as listed; ferric iron limit to be agreed.” - “Grade, CAS number and hydrate named on the COA and the label.” For a dried grade the same list applies with the dried CAS number, iron 30.0–33.0% and water about 10–13%. Do not write “ferrous sulfate” as the article name on a specification; it describes a family, not a purchase. ## Where the other grade fails If the formula is a dry capsule or tablet with a tight fill weight, the heptahydrate's water is dead weight; the dried grade puts more iron in the same volume. If the formula is a solution, the heptahydrate is the easier starting material and the dried grade offers no advantage. A label that names the heptahydrate rules out the dried grade as a silent substitution: the ingredient declared and the powder weighed would not be the same article. The reverse also holds. A buyer who needs the heptahydrate for a solution should not take the dried grade as “the same salt, less water” and rebalance later. The hydrate is part of the identity, and the iron figure is the evidence. Catalog data for the grade sit on the ferrous sulfate hub. The heptahydrate-against-dried page works through the iron and fill-weight sums; the ferrous fumarate and ferrous gluconate pages set out the alternative salts; the methods library covers the assays and the quality page the release sequence. ### 02.1 Ferrous sulfate heptahydrate vs dried: the iron figure and the fill weight URL: https://nutrition.rainwoodbio.com/products/minerals/ferrous-sulfate/grades/ferrous-sulfate-heptahydrate-vs-dried/ Reviewed: 2026-11-19 The heptahydrate is 20.09% iron and 45.36% water by formula; the dried grade is about 30–33% iron and 10–13% water. The same 20 mg iron dose needs about 100 mg of heptahydrate or about 63–67 mg of dried ferrous sulfate, so the dried grade puts more iron into a smaller fill. The choice is a fill-weight and label decision, not only a chemical one. In one lineThe same iron dose needs about 100 mg of heptahydrate or about 65 mg of dried ferrous sulfate, and the difference is water the capsule has to carry. ## What “dried” actually means Both articles are ferrous sulfate; they differ in how much water is bound in the crystal. The heptahydrate is FeSO4·7H2O, the pale blue-green crystal that forms from water. The dried grade is made by removing part of that water, usually to the monohydrate or a mixture of hydrates. It is not the anhydrous salt. The dried article has its own CAS number, 13463-43-9, and the monohydrate has 17375-41-6; the heptahydrate is 7782-63-0. The dried grade exists because water is dead weight in a dry dosage form. A kilogram of heptahydrate carries about 201 g of iron; a kilogram of dried grade at 31% carries about 310 g. The difference shows up in the capsule size, the tablet weight, the number of sacks handled and the space the material occupies. “Dried” is a commercial article name, not a stoichiometric formula. Two suppliers can both sell “dried ferrous sulfate” at slightly different iron and water figures. The specification has to state the iron window and the water window, not only the word dried. ## The iron figure and the mass per dose Ferrous sulfate heptahydrate and dried grade compared | Property | Heptahydrate | Dried grade | Formula | FeSO4·7H2O | FeSO4·H2O, nominal | CAS number | 7782-63-0 | 13463-43-9 | Molecular weight | 278.01 | 169.92 as monohydrate | Iron content | 20.09% by formula; catalog 19.5–20.5% | About 30–33%; commonly 30.0–32.0% | Water content | 45.36% by formula; catalog 45.0–48.0% | About 10–13% | Iron per 100 mg | About 20.1 mg | About 30–33 mg | Mass for 20 mg iron | About 99.6 mg | About 62.5–66.7 mg | Appearance | Pale blue-green crystals or powder | Gray-white to off-white powder | Solubility in water | About 26 g per 100 mL at 20 °C | Soluble; dissolves more slowly The arithmetic scales with the dose. At 40 mg of iron the heptahydrate needs about 199 mg and the dried grade about 125–133 mg. These are formula figures, not batch results; the certificate's iron result replaces the theoretical 20.09% or 31% in the calculation. The water difference is the other half of the table. A 20 mg iron dose from the heptahydrate brings about 45 mg of water into the capsule; the dried grade brings about 7–10 mg. At 40 mg of iron the gap is about 90 mg against about 13–17 mg, which is enough to change the tablet weight and the water activity of a blend. ## Fill weight, capsule size and the blend For a capsule, the fill-weight difference is small at 20 mg of iron and decisive at higher doses or in a small shell. A 60 mg iron dose is about 299 mg as heptahydrate but about 188–200 mg as dried grade, so the same dose can move from a smaller shell to a larger one or force a change in the excipient load. A powder blend follows the same arithmetic in percentage terms, and the dried grade leaves more room for a second active. For a tablet, the water in the heptahydrate moves into the granulation. It can help a wet granulation and hurt a dry one, and it can react with alkaline excipients such as calcium carbonate or sodium bicarbonate. The dried grade carries less water, but it is still hygroscopic and still acidic; it is not a neutral filler. In a powder blend, the iron density changes the share of the formula. A 20 mg iron dose is about 10% of a 1 g stick pack when supplied as the heptahydrate and about 6.5% as the dried grade. That changes the flow, the segregation risk and the taste of the blend, and it changes the amount of carrier the formulator needs. ## Solution behaviour Both grades dissolve in water and give a pale green, acidic solution at pH 3.0–4.0. The heptahydrate dissolves at about 26 g per 100 mL at 20 °C; the dried grade dissolves more slowly and may need more agitation or a longer hold. In a solution the water content of the solid no longer matters, because the water is already there. What matters is the iron concentration, the pH and the oxygen load. A liquid formula built on “grams of salt per litre” changes its iron concentration when the grade changes. A 10 g/L solution of heptahydrate carries about 2.01 g/L of iron; the same 10 g/L of dried grade at 31% carries about 3.1 g/L. The formula has to be written on iron, not on salt weight, and the batch record has to show which grade was weighed. The heptahydrate is the conventional solution grade. The dried grade can be used, but the dissolution time and any residue should be checked in the actual process. ## What the label has to say The label names the source and declares the element. In the EU the ingredient list should name “ferrous sulfate heptahydrate” or the dried article, and the nutrition declaration gives iron in mg and as a percentage of the 14 mg/day reference intake. In the US the Supplement Facts panel gives elemental iron in mg and its percentage of the 18 mg Daily Value, with the source in the ingredient list. “Ferrous sulfate” alone is ambiguous on a label. The hydrate is part of the ingredient identity, and a switch from one grade to the other without a label change would name the wrong material. The dose declaration also has to match the weigh-up: a label that declares 20 mg of iron assumes about 100 mg of heptahydrate or about 65 mg of dried grade. ## When to choose which Choose the heptahydrate for a solution, a syrup, a crystal grade or a process built around a soluble ferrous salt. It is the form that dissolves readily. Choose the dried grade for a capsule, a tablet or a dry blend where the fill weight is tight, the iron dose is high, or the water from the heptahydrate would migrate into a moisture-sensitive matrix. Do not use the two as interchangeable. A label that names the heptahydrate needs the heptahydrate, and a formula written for 31% iron will under-deliver by about a third if the heptahydrate is weighed. The opposite substitution brings a different problem: a dried grade in a solution process may dissolve more slowly and leave a residue the process was not designed to handle. Catalog data are on the ferrous sulfate hub; the grades page sets this choice beside the other forms; the ferrous fumarate and ferrous gluconate pages cover the alternative salts; the complexometric method note explains the iron assay and the quality page the release process. ### 03 Ferrous sulfate stability: water loss, oxidation and the pack URL: https://nutrition.rainwoodbio.com/products/minerals/ferrous-sulfate/stability/ Reviewed: 2026-11-19 Ferrous sulfate heptahydrate keeps well as a sealed dry solid and changes once water, heat or air reaches it. In dry air it loses crystal water; in moist air the ferrous iron oxidises to ferric and the colour turns from pale blue-green to yellow-brown. The pack and the storage condition decide which failure arrives first, and the shelf life belongs to the pack. In one lineFerrous sulfate fails in two directions at once: it gives up crystal water in dry air and takes up oxygen in moist air, and the pack decides which failure arrives first. ## The powder: efflorescence, moisture and colour The heptahydrate carries 45.36% water by formula, and the catalog window is 45.0–48.0%. That water is part of the crystal, not a surface contaminant. In a dry store the crystal can lose water to the air, a process called efflorescence; the surface turns dull and powdery, and the water result falls below 45.0%. The powder still looks like ferrous sulfate, but a kilogram of it no longer contains a kilogram of the heptahydrate. In a humid store the opposite happens. The powder picks up water, the surface becomes damp, and the ferrous iron begins to oxidise. The first visible sign is a yellow or rust-coloured bloom on the crystals or on the inside of the liner; the next is caking. The ferric product is a basic ferric sulfate, which is less soluble and shows as a yellow-brown solid. Once it forms, the ferrous assay drops even though total iron does not. Heat accelerates both directions. A cool, dry store slows efflorescence and oxidation; a hot loading bay or a container roof in summer does neither. Light is a secondary factor: it can accelerate the colour change at the surface, so an opaque pack is still the right choice. The pack has to be closed, not merely folded over. ## The solution: acidic, pale green and short-lived The heptahydrate dissolves freely in water, about 26 g per 100 mL at 20 °C, and gives a pale green solution with a pH of 3.0–4.0 at 50 mg/mL. The acidity is part of the material. It keeps ferric iron in solution up to a point, which is why a fresh solution can be clear even though it is already oxidising. On standing, ferrous iron reacts with dissolved oxygen and the solution turns yellow, then brown, and may leave a sediment of basic ferric sulfate or ferric hydroxide. Heat, light, agitation and a rise in pH all speed the change. A solution left in an open bucket over a warm weekend is no longer the material that was weighed on Friday. The practical controls are the ones a liquid process can actually hold: use freshly prepared solution, keep dissolved oxygen low, keep the pH acidic, protect the tank from light and avoid contact with alkaline surfaces. A chelating agent can hold ferric iron in solution, but it does not stop the oxidation; it only keeps the colour and the sediment in check for a while. The hold time has to be measured in the real matrix. ## What drives degradation Factors that move ferrous sulfate heptahydrate during storage | Factor | What it does | Control | Dry air | Efflorescence; crystal water lost; water result falls | Sealed pack; avoid hot, dry stores | Moisture | Water uptake, caking and a damp surface | Moisture-barrier liner; desiccant where needed | Oxygen | Ferrous iron oxidises to ferric; colour and assay move | Low headspace; sealed pack; process control | Heat | Accelerates oxidation and water loss | Cool store; controlled process temperature | Light | Surface colour change | Opaque or foil pack; dark store | pH and alkalis | Ferric hydrolysis and precipitation above pH 4 | Keep the solution acidic; separate alkaline excipients The factors act together rather than one at a time. A warm, humid store combines moisture, heat and oxygen; a clear tank in sunlight adds light to the same mix. The question to ask is which pack, which storage condition and which period the data cover. ## A stability protocol for the ingredient A protocol is only useful if it names the pack, the chamber condition, the sampling times and the test panel. Hold samples at 25 °C/60% relative humidity for the long term and 30 °C/65% for intermediate conditions; 40 °C/75% provides the accelerated arm. A light-exposure arm covers the surface reaction that a dark incubator misses, and a low-humidity arm covers efflorescence, which a humid chamber cannot show. Test appearance, ferrous iron by redox titration, total iron by ICP-OES, water by Karl Fischer, pH and the complexometric assay at each point. Microbiology belongs at release and at the end of the study. Ferric iron is the gap between total iron and ferrous iron measured on one basis; it usually moves before the ferrous assay falls out of its window. The report should carry the individual results rather than a pass statement, with the pack and the lot family identified. A 1 kg foil pouch and a 25 kg fiber drum have different headspace and different opening histories; data from one does not describe the other. If the material will be repacked, run the study on the repacked container as well. ## The finished formula changes the answer Capsules and tablets keep water activity low, but shells and excipients can still pass moisture. An acidic ferrous salt beside calcium carbonate, magnesium oxide or sodium bicarbonate will react, neutralise the acid and precipitate ferric hydroxide, with gas or colour as the visible sign. Moisture-sensitive actives and the capsule shell belong in the compatibility study, not only the salt. In a stick pack the foil and its seal are the barrier. A pinhole lets humid air in, and the powder closest to the breach oxidises first. Inspect the strip as well as the powder, and state the in-use period after opening. A liquid product brings light, oxygen, pH and heat together, so bulk data only start the assessment. Whether an overage is justified is a label and stability choice for the formulator; no overage compensates for a leaking pack or reverses oxidation. ## How the shelf life is set There is no single shelf-life figure for ferrous sulfate, because the pack and the storage condition are part of the answer. The retest period on the specification is tied to stability data from that pack. A figure offered with no pack, no condition and no test panel is an assertion, not a shelf life. Once the retest period ends, the retained sample has to be re-assayed before any extension. Extension by assumption, or by carrying a bulk result across to a repacked container, is not supported. Pack sizes are listed on the product hub; release tests are set out on the COA page; pack and lead time are covered on the MOQ page; the ICP-OES note explains the total-iron check and the quality page the release workflow. ### 04 Ferrous sulfate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/ferrous-sulfate/moq/ Reviewed: 2026-11-19 Ferrous sulfate is sold from 1 kg: a single foil pouch is the entry pack, and a 25 kg fiber drum is the bulk unit. Standard lead time is 1–7 days from confirmation. To get a firm quotation, state the hydrate and CAS number, the iron and water windows, the quantity and pack, the delivery point and Incoterm, the documents required, and the intended use. In one lineThe 1 kg pack is the minimum because one lot code, one certificate and one retained sample must stay with the material while the iron and water figures are qualified. ## Why the minimum is 1 kg One kilogram is enough to run the checks a new lot needs: identity, complexometric assay, iron, Karl Fischer water, a ferric check, microbiology, a bench batch and a retained sample. It is the smallest unit that keeps one lot code and one certificate with the material. Smaller quantities are normally divided out of a larger lot, which breaks that link. Because the pack is sold by weight, the grade decides how much iron arrives. A kilogram of heptahydrate at 20.09% contains about 201 g of iron; a kilogram of dried grade at 31% contains about 310 g. A project that needs 5 kg of iron therefore needs roughly 25 kg of heptahydrate or 16 kg of dried grade, before process loss. The 25 kg drum lowers handling per kilogram, but it also locks up inventory and extends storage. The minimum is a pack rule, not a volume target. ## Packs and formats Ferrous sulfate packs and physical forms | Container | Net fill | Where it fits | Handling | Foil pouch | 1 kg | Trial and small batch | Heat-sealed; reclosing is only for a short hold | Fiber drum | 25 kg | Production | Inner liner; write the opening date on the drum | Powder, 40 mesh | 1 kg or 25 kg | Capsules, tablets, blends | The standard catalog form | Crystals | On request | Solution processes | Dissolves slowly; check agitation At 1 kg the foil is the barrier and the seal is the weak point. Reclosing an opened pouch does not restore a heat seal, and the air inside has already changed. A drum depends on its liner: keep the liner tied, put the drum on a pallet, and mark the date it was first opened. Pouch, liner and certificate should all show the same lot code. The catalog powder passes 40 mesh; crystals are quoted on request. A different mesh, a granulation or a dilution is a new specification, not a packing variant. Tell us before the quote if the line needs a coarser or faster-flowing powder, because the sieving step may add time. ## From confirmation to dispatch A standard pack ships within 1–7 days of confirmation. Picking, documents and handover are inside that window; transit, customs and the buyer's release are not. A crystal grade, custom mesh or special pack is quoted with its own timing. Ask for a dispatch date as well as a lead time. A drum usually moves on a pallet and a pouch as a parcel; the Incoterm assigns freight and entry clearance. Documents should accompany the lot rather than follow it. ## What a quotation needs Six details make quotes comparable: - Article. Ferrous sulfate heptahydrate, CAS 7782-63-0, or the dried grade with its CAS number. - Limits. Assay, iron, water, identification, mesh, heavy metals, microbiology and any ferric limit. - Pack and quantity. 1 kg pouch, 25 kg drum, powder or crystals. - Delivery point and Incoterm. Country, address or port, and the trade term. - Documents. COA, specification, SDS and any statement the importer requires for the destination. - Intended application and destination. Whether the material goes into a supplement, a food or another product, and the country of sale. Without the hydrate, a quote carries only a family name. The same name covers a 20% iron hydrate and a 31% iron dried article, and neither substitutes for the other on a label or in a fill. Commercial terms appear on the quote, not on this page. ## What the first pouch qualifies The 1 kg pouch is what a new lot is qualified on. Run identity, assay, iron, water and microbiology before scale-up, and request a ferric result if storage will be long. Retain material from that pouch. If sample, COA and quote do not share a lot code, the exercise is a demonstration rather than a qualification. For a smaller bench trial, ask first. Material divided from a drum is a repack with its own traceability; record it separately. A bench sample and a later production drum need not come from the same lot. ## Commercial and quality terms The quote fixes commercial terms, Incoterm, pack, lead time and documents. Quality terms run beside it: specification revision, COA per lot, retained sample, retest period and change control. Put the quality agreement in place before the first production order, not after a disagreement. Returns and replacements follow the quote and the quality agreement. If a lot misses the agreed limits, the retained sample and a joint re-test decide the outcome; a photo does not. Name the referee laboratory and the party bearing that cost in advance. Product data sit on the ferrous sulfate hub; release tests are listed on the COA page; market files are on the compliance page; the quality page explains the release workflow and the MOQ glossary entry defines the term. ### 05 The regulatory file for ferrous sulfate heptahydrate URL: https://nutrition.rainwoodbio.com/products/minerals/ferrous-sulfate/compliance/ Reviewed: 2026-11-19 Ferrous sulfate raises four questions in any market: whether the hydrate may be used, what contaminant ceiling applies at the daily dose, how the label names the iron source and the elemental iron, and what may be claimed. The buyer's regulatory team confirms the route for the destination; this page sets out the frameworks and the documents that support the file. The catalog gates are lead 3, arsenic 2, cadmium 1 and mercury 0.1 mg/kg. In one lineA ferrous sulfate certificate proves a lot; the destination file proves that the hydrate, the iron level and the label fit the market where the product is sold. ## The four checks The four questions get mixed together because they arrive in one email. A permitted-form list decides whether the substance may be used at all. A contaminant regulation sets a ceiling for the finished product. Labelling rules govern the panel and the warnings. Claims law governs the sentence under the logo. They also fail separately. A source accepted in one market may be absent from another market's list; a finished-product ceiling cannot be used as a drum limit; a US structure/function statement does not turn into an authorised EU claim. An iron salt can also reach the market through a food-additive or fortification route, on a different list with different conditions. The supplement route and the additive route do not substitute for one another, and the buyer's team decides which one applies. The certificate answers the lot question; it does not answer the route question, which is why the file needs a document list with versions and any gap named before the order. ## European Union Directive 2002/46/EC is the framework for food supplements. Annex II is the list of vitamin and mineral substances, and the forms of them, against which the iron source is checked. The buyer's regulatory team confirms that the entry covers the exact hydrate and the intended use, in the consolidated text in force on the day of sale. Regulation (EU) No 1169/2011 governs the label. Iron has a reference intake of 14 mg/day, and the nutrition declaration gives the elemental iron in mg and as a percentage of that reference. The supplement particulars — the daily portion, the over-dose warning and the varied-diet statement — come from the same framework. Contaminants are governed by Regulation (EU) 2023/915, and general food law by Regulation (EC) No 178/2002. Great Britain applies retained law through its own register and labelling rules, while Northern Ireland follows the EU framework. The two are checked separately. ## United States The US starts from a different question: whether the exact form is a lawful dietary ingredient. Section 201(ff) of the Federal Food, Drug and Cosmetic Act, as amended by DSHEA, offers three bases — a new dietary ingredient notification at least 75 days before marketing, a GRAS conclusion, or evidence of marketing as a dietary supplement before 15 October 1994. The supplier should identify which basis it uses and be able to show the supporting file; the fact that iron is an essential nutrient supplies none of the three. The Supplement Facts panel declares elemental iron, the source is named in the ingredient list, and the Daily Value for adults and children four and older is 18 mg under 21 CFR 101.36. The cGMP in 21 CFR 111 requires identity testing of each component on receipt, so the buyer's own test is part of the record. A structure/function statement has to be truthful, substantiated and disclaimed, and the FDA must be notified within 30 days of first marketing. A disease claim has no route at all. ## The contaminant table Contaminant limits · catalogue specification and market ceilings | Contaminant | Catalogue limit | EU supplement ceiling | US federal | What the file shows | Lead | ≤3 mg/kg | 3.0 mg/kg | No general limit | Result, method and dose calculation | Arsenic | ≤2 mg/kg | No harmonised limit | No general limit | The agreed limit and the method | Cadmium | ≤1 mg/kg | 1.0 mg/kg | No general limit | Result and any category exception | Mercury | ≤0.1 mg/kg | 0.10 mg/kg | No general limit | Result and method The EU figures apply to the supplement as sold. The catalogue figure applies to the drum. Converting one into the other needs the daily dose and the ingredient's share of the formula. Arsenic is the line to watch: 2 mg/kg is a customer limit because the EU has no general maximum for it in supplements. The current text governs. ## Claims and label wording Neither market allows a disease claim. In the EU the only route is the authorised list under Regulation (EC) No 1924/2006 and Regulation (EU) No 432/2012, with the conditions attached to the wording. The list includes iron claims about normal red blood cell formation and haemoglobin; the brand's reviewer selects the exact authorised wording and checks that the conditions are met. A claim on a supplier's website does not transfer to the brand's label. For the US, the brand drafts and substantiates a structure/function statement and adds the DSHEA disclaimer. The article name on the label is an identity statement, not a health claim, and it still has to match the COA. “Heptahydrate” is chemistry, not a permitted claim, and “dried” is a grade name, not a benefit. No disease-related claim is made for this material on this page; the finished product's claim review belongs to the brand's regulatory reviewer. ## The document pack Documents a brand should hold for a ferrous sulfate lot | Document | What it establishes | Issued by | Specification | The article, hydrate and limits agreed | Buyer and supplier | Lot COA | The results for the lot | Manufacturer | SDS | Handling and hazard data | Manufacturer | Identity records | IR, titration and water for the lot | Manufacturer or laboratory | Contaminant results | Metals and microbiology | Manufacturer or laboratory | Allergen, GMO, origin statements | Declarable inputs and status | Manufacturer | Label artwork | Source, elemental iron, warnings | Brand Each document should carry or point to the lot code. ## What to check before the first order Market file checklist · ferrous sulfate | Check | Evidence | Red flag | Grade and hydrate named | CAS number and hydrate on the specification and COA | “Ferrous sulfate” with no hydrate | Route confirmed | The destination entry or basis, checked by the buyer's team | A supplier assurance standing in for the text | Contaminants | Results against the ceiling at the daily dose | A drum limit pasted onto the finished product | Label source and iron | Ingredient list names the source; iron in mg and % NRV or % DV | Salt weight presented as elemental iron | Claims | Authorised wording, or a structure/function statement with its disclaimer | Wording that promises a disease outcome | Documents | Lot code on every file | Generic papers with no lot link The ferrous sulfate hub carries the catalog specification. The COA page shows how the results are laid out, and the identity page covers the tests that separate the hydrate from the dried grade. The EU and US notes expand each market; the quality page explains how the lot file is assembled. ### 06 How we prove a ferrous sulfate lot is the heptahydrate URL: https://nutrition.rainwoodbio.com/products/minerals/ferrous-sulfate/identity/ Reviewed: 2026-11-19 A ferrous sulfate lot is the heptahydrate when the document names the hydrate and CAS 7782-63-0, the ferrous and sulfate reactions both match, the iron is 19.5–20.5%, the water is 45.0–48.0%, and the two figures agree with the FeSO4·7H2O formula. The iron assay alone cannot separate the heptahydrate from the dried grade, the anhydrous salt or a partly oxidised lot. The water figure and the ferric check are the measurements that close that gap. In one lineThe hydrate is the identity: the ferrous and sulfate reactions name the salt, the iron and water figures fix the heptahydrate, and the ferric check shows how much has oxidised. ## The five identity layers A certificate can carry the right name and still leave the powder unproven. Each level below answers a different question and carries a different proof. A supplier who stops at the first has supplied a label, not a material. Five layers of ferrous sulfate heptahydrate identity | Level | What it answers | Method | Evidence supplied | Document | Is the hydrate named? | Name, CAS number, formula | A statement on paper | Ferrous reaction | Is the iron ferrous? | Potassium ferricyanide or phenanthroline | Fe2+, not the counter-ion | Sulfate reaction | Is the counter-ion sulfate? | Barium chloride; white precipitate | Sulfate, not the metal | Iron and water | Does the ratio fit the heptahydrate? | Complexometric iron and Karl Fischer water | Hydrate stoichiometry | Solid form | Is the crystal the expected one? | X-ray diffraction or infrared spectrum | Crystal form, not purity The order matters. The reactions identify the salt; the numbers identify the hydrate; the solid-state method identifies the crystal. None of them replaces the others, and the certificate should show enough of each to let a reader repeat the conclusion. ## The iron-to-water ratio: fixing the hydrate The formula fixes the arithmetic. Iron is 55.85 ÷ 278.01 = 20.09% of FeSO4·7H2O; water is 126.11 ÷ 278.01 = 45.36%; sulfate is 34.55%. The molar ratio is one iron to one sulfate to seven water. The catalog windows — iron 19.5–20.5% and water 45.0–48.0% — are wide enough to allow a little surface moisture, but not wide enough to turn the heptahydrate into the dried grade. The ratio is a diagnostic. If a lot reads 19.8% iron, the expected crystal water is about 44.7%; a measured 47.0% means roughly 2.3% extra water, and the iron is diluted in proportion. If a lot reads 31% iron and 10% water, it is the dried article, not a wet heptahydrate. The two figures together are far more specific than either one alone. The ferric check adds the oxidation state. Total iron by ICP-OES minus ferrous iron by redox titration gives ferric iron. For illustration, a lot with 20.2% total iron and 19.6% ferrous iron carries 0.6% ferric iron, about 3% of its total iron. That is the figure that tells a buyer whether the pale blue-green colour is still describing the material. Sulfate by gravimetric barium sulfate or ion chromatography confirms the counter-ion. The theoretical figure is 34.55%; a low sulfate result with a normal iron result points to another anion, and a high sulfate result with low iron points to a sulfate diluent. pH of a 50 mg/mL solution, 3.0–4.0, is a supporting check, not a quantitative one. ## X-ray diffraction and the solid state X-ray diffraction reads the crystal lattice. It can distinguish the heptahydrate from the monohydrate and the anhydrous salt, and a crystalline ferric phase, for example goethite or a basic ferric sulfate, will appear if it is above the detection limit. Amorphous ferric hydroxide has no lattice, so diffraction cannot see it. XRD therefore sits alongside the iron and water results rather than replacing them. Infrared spectroscopy is the other solid-state check. The spectrum shows the sulfate and water bands and gives a fingerprint that can be compared with a reference of the same hydrate. The catalog identification is infrared plus titration; the spectrum answers “is this the expected solid?”, while the titration answers “how much?”. Neither one alone proves the hydrate. Before accepting a “match” statement, ask for the reference pattern or spectrum and the detection limit. A match with no reference named proves nothing about the sample. ## What adulteration looks like Likely substitutions in a ferrous sulfate lot | Substitute | Effect on the lot | Warning sign | Check | Dried or monohydrate grade | Less water, more iron per gram | Water below 45%; iron above 20.5% | Karl Fischer plus iron | Added water | Dilutes the iron; caking | Water above 48%; iron low | Karl Fischer plus iron | Ferric oxidation | Ferrous iron becomes ferric | Yellow-brown colour; ferrous figure low | Redox titration plus ICP-OES | Sulfate diluent | Lowers iron; raises sulfate | Iron low; sulfate high; foreign cation | Ion chromatography or ICP-OES | Dye | Matches colour, not the chemistry | Colour without the iron or water ratio | Full identity panel Colour is the weakest signal. The blue-green to brown window is broad enough that a dye can imitate part of it. The stronger signals are the water figure, the iron-to-water ratio and the ferric difference. A sheet that gives appearance and assay but omits water leaves the most probable substitution unexamined. ## Writing identity into the specification - “Ferrous sulfate heptahydrate, CAS 7782-63-0, FeSO4·7H2O.” - “Assay 99.0–101.0% by complexometric titration; iron 19.5–20.5%.” - “Water 45.0–48.0% by Karl Fischer titration.” - “Identification by infrared spectrum and titration, against a named reference.” - “Ferrous reaction and sulfate reaction both conform.” - “Sulfate about 34.6% by gravimetry or ion chromatography, where the counter-ion is to be confirmed.” - “Ferric iron limit to be agreed; report total iron and ferrous iron on the same basis.” ## Five questions for the supplier - What hydrate does the certificate name, and what CAS number is printed beside it? - What are the iron and water results, and which methods produced them? - What is the ferric iron figure, measured as total iron minus ferrous iron? - Will you send the infrared spectrum and the sulfate result, not just the assay number? - If the lot is disputed, is a joint re-test on the retained sample acceptable, with XRD if the crystal form is questioned? If all five answers arrive with documents, the identity file is complete; one assay figure is not a substitute. Catalog data sit on the ferrous sulfate hub; the COA page maps each figure to its certificate line; the grades page sets the hydrate against the dried grade; the level-four page follows the fill-weight consequences; the XRD note explains the solid-state check and the quality page the release workflow. ### 01 What the COA for ferrous bisglycinate actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/iron-bisglycinate/coa/ Reviewed: 2026-11-19 The certificate for a ferrous bisglycinate lot reports appearance, identification by IR and HPLC, assay by HPLC, elemental iron by complexometric titration, moisture, the contaminant panel, microbiology and a sieve result. The assay and the iron figure are two views of the same chelate, and the certificate is complete only when the glycine ratio and the moisture sit beside them. The limits below are the catalog specification; the lot certificate is what proves the pack in hand. In one lineThe assay and the iron figure describe the same chelate from two directions, and the glycine ratio and moisture are what make the pair add up. ## Reading the certificate as a test report A certificate can be audited only when each row states what was measured, the method and the limit. A row that says “conforms” without a method leaves the reader with a conclusion and no evidence. The two quantitative lines on this sheet are not duplicates: the HPLC assay measures the chelate, and the titration measures the element. Release tests and identity lines · ferrous bisglycinate | Parameter | Method | Release limit | Appearance | Visual | Greenish-grey to off-white powder | Identification | IR and HPLC | Conforms to the reference | Assay | HPLC | 98.0–102.0% | Iron (Fe) | Complexometric titration | 26.0–28.0% | Glycine ratio | HPLC | 2:1 molar; report the measured ratio | Loss on drying | Gravimetric | ≤5.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh The glycine ratio is the line that shows the stoichiometry rather than the total. A certificate that prints assay and iron but no ratio has shown two totals; it has not shown that the glycine is bound to the iron at the 2:1 ratio the name implies. ## Assay, iron and moisture are one calculation The chelate is Fe(C2H4NO2)2, formula C4H8FeN2O4 and molecular weight about 203.96. At full stoichiometry it carries 27.38% iron and 73.61% glycine on a free-glycine basis. The catalog window of 26.0–28.0% iron brackets that theoretical figure, which is why the iron line is a real identity check and not a second assay. The basis matters because the three lines multiply. Take a lot at 98.0% assay on the dried basis with 5.0% loss on drying: as weighed, the chelate is 93.1% of the powder and the iron is 0.980 × 0.950 × 27.38% = 25.5%, below the 26.0% floor. The same numbers on a different basis can pass. The basis belongs beside the assay value, with the measured loss on drying next to it, not at the foot of the page. Read the trio together. If assay, iron and moisture do not close the arithmetic, ask which basis was used before disputing the result. A lot can meet the assay and fail the iron because of moisture alone, and no chemistry has changed in the drum. ## Release limit versus batch result One column states the gate the lot had to meet; the other states what the laboratory actually found. Both belong on the certificate, with the method named beside them. If the result column repeats the specification range, the reader is looking at the gate again, not at a measurement. Reading a result column against its limit | Parameter | Release limit | What the result should show | Assay | 98.0–102.0% | A measured percentage, with the basis and the HPLC method | Iron | 26.0–28.0% | A measured percentage by titration, with the calculation | Loss on drying | ≤5.0% | A measured percentage | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot “Passes specification” is a conclusion the reader should be able to reach from the numbers. A single total for heavy metals hides the individual element that matters. A microbiology line without the count is an opinion, not a measurement. ## What moves between batches Colour is the least numerical line on the sheet, and it often says the most. Greenish-grey to off-white covers a wide window; a browner or darker lot can point to oxidation of ferrous iron to ferric, a longer hold or a different drying step even though the assay passes. Request the ferrous/ferric ratio rather than rejecting on colour alone. The iron figure by complexometric titration measures total iron, so a partly oxidised lot can still titrate inside the window. That is why the valence check sits behind the certificate: the element has not left, but its oxidation state has changed. Loss on drying moves with the pack and the warehouse, and the glycine ratio moves with the reaction and the recovery step. Particle size is a finishing line. A change of mill or sieve moves the 40 mesh result without any change in the chemistry, and the lot code should link the pack, the certificate and the sample kept for reference. ## When to order an outside test An outside test earns its cost at a new source, a first shipment, an unproven form claim or a contested result. The useful panel is targeted: complexometric titration for iron, HPLC for the glycine ratio, IR for identity, a ferrous/ferric check, sulfate, fumarate and gluconate screens to exclude an iron salt blend, ICP-MS for the heavy-metal panel and a moisture determination. Add XRD when the question is whether the solid is a crystalline chelate or an amorphous dilution. Have the laboratory state the detection limit behind every screen; “not detected” without a limit describes the method, not the sample. Keep the chain of custody intact: the material in the laboratory should be the material held in retention. ## What to compare between suppliers Six lines are enough to compare two suppliers: the form and CAS; the assay and its basis; iron and method; glycine ratio; moisture; and the contaminant and microbiology results with the pack size and lot code. If two offers match on assay but not on basis or ratio, they do not describe the same powder. The second layer is traceability: who made the lot, which iron source and which glycine went into it, and how it was dried and milled. The catalog specification is published on the iron bisglycinate product page. The form and grade questions are on the grade comparison page; the tests that prove the chelate are on the identity page; the analytical method is described in the methods library; how lots are released is described under quality. ### 02 Powder or granulated: choosing an iron bisglycinate grade URL: https://nutrition.rainwoodbio.com/products/minerals/iron-bisglycinate/grades/ Reviewed: 2026-11-19 The catalog grade is a 40-mesh ferrous bisglycinate powder specified at 26.0–28.0% iron; granulation is available on request and changes flow and dust, not the chelate. A material sold below that iron window is a diluted or lower-strength grade, and it needs its own specification and label. The 2:1 glycine–iron ratio is the identity that stays the same across every grade. In one lineThe grade changes the powder, not the chelate: mesh, flow and iron per gram move while the 2:1 glycine–iron identity stays. ## Why a chelate still has grades In this catalog, grade means physical form and concentration, not a different iron compound. The chemistry is fixed: one ferrous ion bound to two glycinate ligands. What a buyer can choose is particle size, flow behaviour and the iron figure per gram of powder. The standard is a 40-mesh powder. A granulated version is for flow and dust control. A diluted version lowers the iron per gram for a small-dose formula. Each is a separate specification with its own fill weight and, in the diluted case, its own ingredient list. None of them is a different chelate. ## The grades side by side Ferrous bisglycinate grades and what changes | Grade | Iron | What changes | Typical fit | 40-mesh powder (catalog) | 26.0–28.0% | Standard particle size and flow; dissolves in water | Capsules, tablets, powder blends | Granulated, on request | 26.0–28.0% | Larger particles, less dust, better flow, slower wetting | High-speed tableting, dry blends | Carrier-diluted, separate purchase | Below the catalog window | Carrier mass, assay basis and label | Small-dose premix | Blend offered as bisglycinate | Variable | Not a grade; the chelate is not proved | Not supplied under this specification The last two rows are the ones that catch buyers. A diluted grade is a legitimate purchase when the carrier is declared and the assay is quoted on a stated basis, but it is not the 26.0–28.0% material. A blend of an iron salt and glycine can look like a chelate on a certificate that reports only iron and nitrogen; the sulfate screen, the valence check and the solid-state pattern are what expose it. ## Mesh, flow and the solution The catalog particle size is ≥95% through 40 mesh. That is a sieve result, not a promise about every particle: the certificate should report the measured percentage through the sieve. Granulation builds larger particles from the same powder. It raises bulk density, cuts dust and segregation, and can slow the rate at which the powder wets and dissolves. Ferrous bisglycinate is soluble in water and the solution is acidic. In a capsule or a tablet the powder is swallowed, so dissolution in the glass is not the question; in a stick pack or a drink mix it is. A granulated grade that flows well on a tableting press may sit longer in a glass of water, and the two effects come from the same change in particle size. Colour is greenish-grey to off-white in every grade. A granulated lot and a milled lot can differ slightly in shade without a chemistry change, but a brown cast is an oxidation signal and not a grade difference. ## Matching the grade to the dosage form Grade choice by dosage form | Dosage form | Starting grade | What to check | Capsule | 40-mesh powder | Fill weight from elemental iron; flow on the encapsulator | Tablet | Granulated, on request | Flow, compaction and the dissolution result | Stick pack or drink mix | 40-mesh powder | Wetting, colour and taste in the finished mix | Dry blend or premix | Granulated or powder | Segregation and the carrier declaration The fill weight follows the iron figure, not the chelate mass. At the 27.0% midpoint, a 20 mg iron dose takes 20 ÷ 0.27 = 74 mg of powder; at 26.0% it takes 77 mg, and at 28.0% it takes 71 mg. A granulated grade keeps the same arithmetic. A diluted grade does not, because the iron figure has moved. ## What to write into the specification - “Ferrous bisglycinate, CAS 20150-34-9, C4H8FeN2O4, 2:1 glycine–iron chelate.” - “Assay 98.0–102.0% by HPLC; iron 26.0–28.0% by complexometric titration.” - “Glycine ratio 2:1 molar; report the measured ratio on the certificate.” - “Loss on drying ≤5.0%; particle size ≥95% through 40 mesh.” - “Granulation or carrier, if any, named with the carrier identity and the assay basis.” - “Label name: ferrous bisglycinate, written out rather than a generic ‘iron chelate’.” A purchase order that says “chelated iron” has not specified this material. The form name, the ratio and the iron window are what make the order reproducible. ## When a different grade is the wrong answer If the label declares ferrous bisglycinate as the ingredient, a carrier-diluted grade adds an ingredient the label does not name, and the declaration has to change. If the product is a stick pack that must dissolve quickly, a granulated grade can slow the step it was meant to improve. If the press runs at speed and the powder flows poorly, the un-granulated grade may be the wrong starting point. The reverse mistakes are just as common. A buyer who needs the 26.0–28.0% material should not accept a 20% grade and adjust the fill weight without a new specification, because the carrier, the assay basis and the label all change with the dilution. A blend is not a grade at all; it is a different material with an unproven chelate. The catalog specification is on the product page; the release lines are on the COA page; the ratio test is on the identity page; the comparison with a ferrous salt is on the bisglycinate vs fumarate page; the pack and lead time are on the MOQ page. ### 03 Ferrous bisglycinate: moisture, oxidation and the pack URL: https://nutrition.rainwoodbio.com/products/minerals/iron-bisglycinate/stability/ Reviewed: 2026-11-19 Ferrous bisglycinate is at its most stable as a sealed, dry powder; the ferrous iron oxidises once moisture and oxygen reach it, and the change shows in colour and in the ferrous/ferric ratio. In solution the rate rises with oxygen, heat, light and pH. The retest period comes from stability data on the exact pack, the 1 kg foil pouch or the 25 kg fiber drum, not from the certificate. In one lineA sealed, dry pack is the stable format; moisture and oxygen turn ferrous iron ferric, and the shelf life belongs to the pack that keeps them out. ## The powder: moisture, oxygen and colour Loss on drying is specified at ≤5.0%; that figure is a release criterion, not permission to store the powder damp. Once the pouch is opened, the powder takes moisture from the surrounding air; moisture rises, the assay as weighed drops and the shade may drift from greenish-grey towards brown. The chemistry behind the colour is oxidation: Fe(II) becomes Fe(III). Total iron by complexometric titration may stay inside the window because the element has not left the powder, so a passing iron result does not prove that the ferrous state is intact. If the colour has moved, ask for the ferrous/ferric ratio or a suitable valence test rather than reading the iron figure as a stability result. Keep the powder in its original sealed pouch or in an opaque, moisture-barrier container that closes properly. A clear jar on a bench is an exposure to light and air, and a scoop left in the drum is an open surface. Let a cold pack warm to room temperature before opening, so that water does not condense onto the powder. ## The solution is the weakest format The chelate dissolves in water and the solution is acidic. In solution, oxygen, heat, light and pH act at the same time, and the ferrous iron is more mobile than it is in the dry solid. Pasteurisation or hot fill in a ready-to-drink line adds a heat step; a stick pack skips that step because the user adds water when the drink is made. Where a liquid cannot be avoided, keep dissolved oxygen low, protect the container from light, control the pH and validate the hold time before filling. Data from the bulk powder cannot be carried into a liquid: the formula, the process and the container all alter the rate, and the shelf life has to be demonstrated in the finished drink. ## What drives degradation Factors that move ferrous bisglycinate during storage | Factor | What it does | Control | Moisture | Raises loss on drying; promotes oxidation and caking | Sealed foil pouch; dry store; reseal after use | Oxygen | Converts Fe(II) to Fe(III), especially in solution | Low headspace; sealed pack; process control | Light | Accelerates colour change and oxidation | Opaque or foil pack; dark store | Heat | Raises the rate of moisture and oxidation damage | Controlled store; cool process | pH | Changes chelate stability and solution colour | Validate the matrix pH; hold time | Matrix redox | Reducing agents or other metals shift the ferrous/ferric balance | Test the finished matrix; control metal contact The factors interact. A warm, bright, damp store is more damaging than three separate stresses would suggest, and an acidic drink in clear glass combines light, oxygen and pH in one container. The useful question is not whether the material is stable in general, but stable in a given container, at a given condition, for a given time. ## Designing the stability study A protocol is only useful when it names the pack, the conditions, the time points and the test panel. The warehouse arm is usually 25 °C/60% relative humidity, with 30 °C/65% relative humidity as the intermediate condition and 40 °C/75% relative humidity as the accelerated arm. A light-exposure arm covers what a dark cabinet cannot show. Test assay, iron, the glycine ratio, loss on drying, appearance and microbiology at each point. Add a ferrous/ferric check if the colour moves. For a stick pack or a beverage, repeat the work in the matrix at the process pH and heat load. Each time point should carry its measured values, not a summary verdict, and the report should tie them to a pack and a lot family. Request the summary for the pack you intend to use. Headspace and opening history differ between a drum and a pouch, and data from one pack does not answer for the other. ## The finished formula changes the answer Capsules and tablets run at low water activity, yet the shell and the excipients can still move moisture into the fill. Measure moisture at release and again after storage, and inspect the fill itself. A stick pack stands or falls on its seal: a pinhole ruins the pack, so the strip itself needs inspection, not just the powder. A drink brings light, pH, heat and oxygen together, and the bulk powder's behaviour is only a starting point. Whether to add an overage is the formulator's call, and it is a label and stability decision; it cannot compensate for a pack that admits moisture. In a blend with ascorbic acid or a reducing sugar, the redox chemistry of the iron has to be tested in the matrix rather than assumed from the powder. ## How the shelf life is set No single shelf-life figure is published for ferrous bisglycinate, since the container and the storage climate determine it. The retest period is written into the specification and backed by stability data generated on that pack. A figure with no pack, no storage condition and no test panel is a claim, not a shelf life. At the end of the retest period, assay the retained sample again before extending the date. Extension is a decision backed by a new assay, not an assumption; a bulk figure also does not transfer to a repacked container. Standard packs are set out on the product hub; what is tested at release is listed on the COA page; the MOQ page covers pack and timing; the analytical methods are described in the methods library; how lots are released is described under quality. ### 04 Iron bisglycinate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/iron-bisglycinate/moq/ Reviewed: 2026-11-19 The minimum order is a single 1 kg foil pouch, and the bulk pack is a 25 kg fiber drum; the standard 40-mesh grade is quoted at 1–7 days from confirmation. A quotation can be compared only when it names the chelate and CAS number, the assay and iron figures, the quantity and pack, the destination and Incoterm, the documents and the intended market. Granulated material is a separate specification with its own timing. In one lineOne kilogram is enough for a trial, a retained sample and an independent check; the 25 kg drum is the production pack, not a different material. ## Why the floor is one kilogram A kilogram is enough for a formulation trial, material kept for reference and a second laboratory's identity check, and it travels as a parcel rather than on a pallet. The pack carries its own lot code and certificate, so the material tested is the material shipped. Smaller quantities usually come from splitting a larger lot, which adds a repack step and a second traceability chain. The 25 kg drum is the production pack: fewer handling steps and fewer lot changes, at the cost of inventory and a longer storage period. The floor is set by the pack, not by a sales threshold, and the pack should follow the trial plan. ## Packs and formats Standard ferrous bisglycinate packs | Pack | Pack size | Where it fits | Handling | Foil pouch | 1 kg | Trials and small batches | Foil barrier; close tightly after opening | Fiber drum | 25 kg | Production | Lined drum; lot code repeated on the liner | Granulated | On request | Better flow, less dust | Separate specification; timing quoted The catalog form is a 40-mesh powder. Granulation is not a packing variant: it changes the particle-size specification and can change the timing and the quotation, so it belongs in the enquiry before the offer is issued. If the press or the blend needs a coarser powder, name that requirement at the start. ## Lead time and dispatch The standard grade is dispatched 1–7 days after the order is confirmed. Picking, documents and handover to the carrier sit inside that window; transit, customs and the customer's own release sit outside it. A granulated grade or a special pack is quoted with its own additional time. Ask for a dispatch date as well as a lead time. A drum usually moves on a pallet and a pouch as a parcel, and the Incoterm decides who arranges the movement and who clears it. Documents should accompany the consignment rather than follow it. ## What makes a quotation comparable Six details separate a quotation from an enquiry reply: - The chelate and its CAS number. Ferrous bisglycinate, 20150-34-9, not a generic chelated iron. - The specification. Assay with its basis, iron, glycine ratio, moisture, mesh and the contaminant panel. - The pack and quantity. A 25 kg drum, a 1 kg pouch, or a granulated grade quoted separately. - The destination and trade term. Country, delivery point and Incoterm. - The document set. COA, specification, TDS, SDS and any destination-specific declaration. - Where it will be used. A supplement, a food or another application, and the destination market. Without the market and the form, a quotation is a price for an unnamed powder. Commercial terms are issued with the quotation, not published here. ## The sample carries a lot code The 1 kg pouch is the qualification unit. Check identity, assay, iron, moisture and microbiology before scaling up, and retain material from the same pack. The lot code should run through the sample, the certificate and the quotation. A sample with no lot behind it cannot qualify a supplier. For a bench trial below 1 kg, agree the split in advance. A repack from a bulk lot has its own traceability and is not the catalog pack. The trial sample and the production drum may come from different lots, and the specification should say so. ## Terms to settle first Commercial terms sit in the quotation; quality terms sit beside them. Fix the specification revision, a certificate for every lot, the sample kept for reference, a retest date and a change-control procedure before the first production order. A quality agreement signed after a dispute is a post-mortem, not a control. If a lot fails the agreed specification, the retained sample and a joint re-test are the evidence; a photograph is not. Agree in advance who commissions the referee test and which laboratory both sides accept. The catalog specification is on the product page; the release tests are on the COA page; the market file is on the compliance page; the grade choice is on the grade page; how lots are released is described under quality. ### 05 The regulatory file for ferrous bisglycinate URL: https://nutrition.rainwoodbio.com/products/minerals/iron-bisglycinate/compliance/ Reviewed: 2026-11-19 Ferrous bisglycinate is supplied as an iron source for food supplements, and whether it may be used in a destination, at what dose and with what label is a route question that the buyer's regulatory team confirms. The supplier's file carries the specification, the lot certificate, the identity evidence and the contaminant results; the buyer supplies the destination route, the finished dose and the label review. This page sets out what belongs in that file and where the framework sits; it is not a permission for any market. In one lineThe specification describes the chelate; the destination file has to prove the route, the limits and the label, and that call belongs to the buyer's team. ## What the file contains Four questions organise the file. Which material and specification revision is on the purchase order? Which lot was released, and what did its certificate measure? Which route, limit and label rule applies in the destination? And what happens to the approval when the supplier, the manufacturing route or the packaging is changed? The route question is the one a supplier cannot answer for the buyer. An iron source added to a food and an iron source in a supplement are built under different rules — the supplement route and the food-additive route are separate files — and a form accepted in one route is not automatically accepted in the other. For Great Britain, the GB register and GB labelling rules apply; Northern Ireland follows the EU rules, and the buyer's team confirms which file is the right one and keeps the evidence with the order. ## European Union Directive 2002/46/EC sets the framework for food supplements, including the lists of vitamin and mineral substances and the forms in which they may be used. The exact iron form has to be matched to the current list and to the member state's implementation; that match is a regulatory check, not a label wording choice. General food law, the food-information rules and the contaminant regulation apply alongside it. Regulation (EU) No 1169/2011 governs the nutrition declaration, where iron is declared in mg against a reference intake of 14 mg. Regulation (EC) No 1924/2006 governs claims, and Regulation (EU) 2023/915 governs contaminants. As of this review, those are the instruments to check; the current consolidated text is the reference, and the buyer confirms the version in force at the destination. ## United States A dietary supplement is regulated under the DSHEA framework, with the finished product made under the dietary-supplement cGMPs of 21 CFR 111 and labelled under 21 CFR 101. Iron is declared in the Supplement Facts panel in mg and as a percentage of the 18 mg Daily Value, while the ingredient list names the form. The buyer confirms the ingredient basis for the exact chelate and the finished product's compliance with the labelling and manufacturing rules. Iron-containing dietary supplements also carry the accidental-overdose warning required by 21 CFR 101.17(e): the finished label warns about overdose in young children and gives a poison-control instruction. That warning is a finished-product obligation, not a line on the bulk certificate, and it should be part of the label review before the first print run. ## Contaminants and the finished dose The panel has to be worked out at the finished-product level, not just measured on the drum. The table gives a starting point for a supplement file; the destination text in force and the daily dose set the final figure. Contaminant limits for a supplement file | Parameter | Starting reference | Evidence required | Lead (Pb) | 3.0 mg/kg in the supplement | Measured value, method, release limit and the calculation at the finished dose | Cadmium (Cd) | 1.0 mg/kg, with category exceptions | Measured value and the category used | Mercury (Hg) | 0.10 mg/kg in the supplement | Measured value and method | Arsenic (As) | Customer or market limit | Agreed limit and method on the certificate The iron dose is a separate check. The label declares elemental iron, and the market may set a maximum daily intake for the finished product or a condition on the label. The brand confirms that the dose and the population on the label fit the destination before the specification is fixed. ## Claims and the label Label and claim review sit outside the certificate. In the EU, the wording has to come from the authorised list for iron; in the US, a structure/function statement needs the standard disclaimer. The brand's reviewer selects wording that fits the nutrient, the dose and the market, and checks that the finished label carries the required statement. This page makes no health claim for the ingredient, and no disease-related claim is made or implied. The ingredient list must name the form that is actually present. “Ferrous bisglycinate” and a generic “iron chelate” are not interchangeable on a label, and a change of form is a relabelling exercise as well as a specification change. The reviewer should have the specification revision that matches the lot before approving any wording. ## Documents in the file Documents and the question each one answers | Document | Question it answers | Specification, with version and date | What is being bought, including the form, the ratio and the iron window | Batch COA | What this lot measured, with method and release limit | Technical data sheet | Appearance, solubility, particle size and pack | Safety data sheet | Handling, dust control and storage hazards | Allergen, GMO, origin and residual-solvent statements | The declarations the importer needs for the destination | Change-control record | What changed in source, process or pack, and when Undated documents gathered in a folder do not make a controlled file. Each document should carry a version that can be matched to the quotation, the specification and the lot. ## Before the first order - Specification version, CAS number and the exact chelate form are named. - The certificate, data sheet, safety sheet and the allergen, GMO, origin and solvent declarations are collected and dated. - The destination route and the iron form have been checked against the current list. - Each contaminant result has been recalculated at the finished-product dose. - The label wording, the iron warning and the claim have been checked for the destination. - The supplier, route and packaging are under change control, and the documents match the lot. Start with the catalog specification on the product page; the COA page walks through a lot's certificate; the identity page covers the testing behind it; the MOQ page covers pack and documents; how lots are released is described under quality. ### 06 How we prove a lot is ferrous bisglycinate URL: https://nutrition.rainwoodbio.com/products/minerals/iron-bisglycinate/identity/ Reviewed: 2026-11-19 A lot is ferrous bisglycinate when five lines agree: the document names the chelate and CAS 20150-34-9; complexometric titration gives 26.0–28.0% iron; HPLC gives glycine at a 2:1 molar ratio to that iron; the iron is ferrous; and IR or XRD matches the reference solid. The iron figure alone cannot separate the chelate from a blend of an iron salt and glycine, and the assay alone cannot separate it from a dilution. In one lineIron content says how much iron is present; only the 2:1 glycine ratio, the ferrous state and the IR spectrum say it is the bisglycinate. ## The identity layers A certificate may carry the correct name and still leave the material unproven. Each layer answers a separate question; an answer to the first alone describes the paperwork, not the powder. Five layers of ferrous bisglycinate identity | Layer | What it establishes | Method | Evidence | Document | Is the identity stated? | Name, CAS number, formula | Paperwork only | Iron | How much iron is present? | Complexometric titration | The element, not the ligand | Ligand | Is the glycine ratio 2:1? | HPLC for glycine | The chelate stoichiometry | Valence | Is the iron ferrous? | Phenanthroline or potentiometric test | The oxidation state | Solid state | Is it a crystalline chelate? | IR and XRD | The compound, not a blend ## The glycine ratio: the stoichiometry check At full stoichiometry the chelate is 27.38% iron and 73.61% glycine on a free-glycine basis, a mass ratio of 2.69 to 1 and a molar ratio of 2.00 to 1. The ratio is fixed by the formula, so a measured ratio that sits near 2.0 supports the chelate while a ratio near 1.7 points to a different composition. Work the arithmetic on the certificate in front of you. A sample with 26.5% iron and 71.9% glycine gives (71.9 ÷ 75.07) ÷ (26.5 ÷ 55.845) = 2.02. The same iron figure with 58.0% glycine gives 1.63, which is what a blend with a large share of an iron salt looks like. The test is a ratio, not a threshold on either figure alone. There is a limit to what the ratio can prove. The glycine assay must release the bound ligand — a hydrolysis step before HPLC — or it measures only free glycine. Even with total glycine, a blend of ferrous sulfate and free glycine can be built to land at 2:1, so the ratio has to be read with the sulfate test, the valence test and the IR or XRD pattern. Each one closes a gap the others leave open. ## X-ray diffraction and the solid state X-ray diffraction addresses the solid state: does the powder give a crystalline pattern that matches a reference, or is it amorphous? A crystalline chelate gives a pattern; a blend or a carrier-diluted powder usually does not give the same one. The comparison is most useful between two sources or two lots, where the chemistry is nominally the same. XRD does not establish purity, and it says nothing about the counter-ion or the ligand. Before accepting a match statement, request the reference pattern and the method's detection limit. For a disputed lot, XRD plus the glycine ratio plus the iron and valence results is stronger than any one of them. ## What adulteration looks like Common substitutions and the signals that expose them | Substitution | Why it is used | Signal | Test | Ferrous sulfate plus glycine | Cheap iron salt with a ligand added | Sulfate present; IR or XRD does not match | Sulfate test, IR, XRD | Ferrous fumarate plus glycine | High iron figure at lower cost | Fumarate present; colour more orange | Fumarate by HPLC, IR | Ferric salt | Oxidised iron, lower cost | Ferric reaction; browner colour; lower solubility | Phenanthroline, solubility | Free glycine | Corrects the ratio of a blend | Ratio at or above 2:1 with low iron | Mass balance, iron, sulfate | Carrier dilution | Lowers iron per gram | Assay and iron low; LOD or ash high | Assay, iron, LOD, microscopy | EDTA or another chelate | Looks chelated on a generic test | Sodium present; no glycine; IR differs | ICP-OES sodium, HPLC, IR Colour is the weakest signal. Greenish-grey to off-white can be reproduced with a dye or a blend, and a genuine lot can darken with age. The stronger signals are the ratio, the valence, the sulfate and fumarate screens and the solid-state pattern. ## How to write identity into the specification - “Ferrous bisglycinate, CAS 20150-34-9, C4H8FeN2O4, 2:1 glycine–iron chelate.” - “Assay 98.0–102.0% by HPLC; iron 26.0–28.0% by complexometric titration.” - “Glycine ratio 2:1 molar; report the measured ratio and the calculation.” - “Ferrous iron: report the ferrous/ferric ratio or a ferrous-specific test.” - “IR conforms to the reference; XRD pattern available on request.” - “Sulfate, fumarate and gluconate screened; no signal above the agreed limit.” - “Sodium absent unless a sodium salt is declared.” - “Loss on drying ≤5.0%; particle size ≥95% through 40 mesh.” ## Five questions for the supplier - Which chelate is this lot, and what CAS number appears on its certificate? - What are the iron result and the glycine result, and what is their calculated molar ratio? - Can you provide the IR spectrum and, if the solid state matters, an XRD pattern? - What is the ferrous/ferric ratio, and which method was used to measure it? - If this lot were disputed, would you re-test the retained sample jointly with us? Those five answers, taken together, are the identity file. A single iron percentage does not. The catalog specification is published on the product page; the COA page maps each figure to its line on the certificate; the grade page covers the physical grades; the compliance page covers the destination file; the analytical methods are described in the methods library. ### 02.1 Iron bisglycinate vs ferrous fumarate: the chelate, the iron and the label URL: https://nutrition.rainwoodbio.com/products/minerals/iron-bisglycinate/grades/iron-bisglycinate-vs-ferrous-fumarate/ Reviewed: 2026-11-19 Ferrous bisglycinate is a 2:1 chelate of ferrous iron and glycine carrying 26.0–28.0% elemental iron; ferrous fumarate is an iron salt carrying 31.0–33.0%. The fumarate therefore carries the same iron in about 83% of the mass, while the bisglycinate dissolves in water and the fumarate does not. A swap changes the fill weight, the ingredient list and the market file, not only the word on the specification. In one lineThe bisglycinate is a 2:1 glycine chelate at about 27% iron; ferrous fumarate is a salt at about 33%, so the swap changes the mass on the scale as well as the name on the label. ## A chelate and a salt are different structures Ferrous bisglycinate is a coordination compound: one ferrous ion is bound by two glycinate ligands through the nitrogen and the carboxylate oxygen. Ferrous fumarate is an ionic salt of ferrous iron and fumaric acid. Both supply iron in the ferrous state, and both are described as iron sources, but the structures are not interchangeable in a formula or on a label. Ferrous bisglycinate and ferrous fumarate side by side | Property | Ferrous bisglycinate | Ferrous fumarate | Formula | C4H8FeN2O4 | C4H2FeO4 | CAS number | 20150-34-9 | 141-01-5 | Structure | Fe(II) with two glycinate ligands | Fe(II) fumarate salt | Iron, catalog window | 26.0–28.0% | 31.0–33.0% | Iron, theoretical | 27.4% | 32.9% | Appearance | Greenish-grey to off-white powder | Orange-red to reddish-brown powder | Solubility in water | Soluble; the solution is acidic | Practically insoluble; soluble in dilute acids | Ingredient-list name | Ferrous bisglycinate | Ferrous fumarate The two names are separate entries in a specification and on an ingredient list. “Iron” or “chelated iron” does not tell a reader which one is in the capsule, and a certificate that reports only iron does not settle the question either. ## Iron content and the mass on the scale The label declares elemental iron; the formulator weighs the material. The gap between the two windows is about six percentage points, which becomes a visible difference in fill weight as the dose rises. Material needed for a declared iron figure | Target iron | Ferrous bisglycinate at 27.0% | Ferrous fumarate at 32.0% | 5 mg | 18.5 mg | 15.6 mg | 10 mg | 37.0 mg | 31.3 mg | 14 mg | 51.9 mg | 43.8 mg | 18 mg | 66.7 mg | 56.3 mg | 20 mg | 74.1 mg | 62.5 mg Use the assay on the lot certificate rather than the midpoint of the window. At the theoretical figures, 100 mg of bisglycinate carries 27.4 mg of iron, which needs 83 mg of fumarate at 32.9%. That 17% mass difference can change a capsule size, and it changes the amount of the other excipients that fit in the same fill. ## Solubility, colour and the dosage form The bisglycinate dissolves in water, so it suits a stick pack, a drink mix or any formula where the iron has to go into solution. The fumarate is practically insoluble and is normally used in capsules, tablets and dry blends where a small, compact dose matters. A suspension made with the fumarate needs a dispersion step and will settle; the bisglycinate starts as a solution. Colour follows the chemistry. The bisglycinate is greenish-grey to off-white and blends into pale powders more easily; the fumarate is orange-red to reddish-brown and limits pale or white products. The fumarate's colour is also a field signal: an unexpectedly pale fumarate lot deserves a question about dilution, just as a brown bisglycinate lot deserves a question about oxidation. Neither material is a drop-in for the other in a sensory or process sense. A tablet that ran well with one may need a different granulation, and a stick pack that dissolved one may show sediment with the other. The trial belongs in the real matrix, at the real share of the formula. ## Oxidation and the matrix Both materials carry ferrous iron, and ferrous iron oxidises to ferric when moisture and oxygen reach it. In the bisglycinate the iron is held by the glycine ligands in solution; in the fumarate the iron is released only as the salt dissolves. Which behaviour is more stable in a given formula is a test question, not a general rule, and the answer changes with pH, water activity and the reducing agents in the mix. Iron can also catalyse the oxidation of lipids and some vitamins, and the rate follows the mobile fraction rather than the total. A soluble chelate in an aqueous mix and an insoluble salt in a dry blend present the iron differently. In a formula with ascorbic acid or a reducing sugar, the redox chemistry has to be measured in the matrix rather than assumed from the powder. This page makes no absorption or tolerance claim for either form. Whether a chelate changes what happens in a person is a clinical question, and the evidence belongs in the brand's file; the label decision here is about mass, solubility, colour and the permitted name. ## The label names the form In the European Union, Directive 2002/46/EC provides the framework for food supplements and the lists of permitted vitamin and mineral forms. The exact iron form has to be matched to the current list and the member state's implementation, and the ingredient list must carry the name of the form actually present. Iron is declared in the nutrition declaration in mg against a 14 mg reference intake. For a US label, the Supplement Facts panel declares iron in mg and as a percentage of the 18 mg Daily Value, while the ingredient list names the form. Iron-containing dietary supplements also carry the accidental-overdose warning required for the finished product. A switch from one form to the other is a relabelling exercise as well as a formulation change, and the market file has to be checked against the new name. The conversion on the label is elemental iron, not salt mass. A formula that declares 14 mg of iron from the bisglycinate provides the same 14 mg from the fumarate, but the material mass falls from about 52 mg to about 44 mg. The nutrition declaration stays the same; the ingredient list and the fill weight do not. ## When to choose which Choose the bisglycinate when the formula needs a soluble iron source, a paler powder or a chelate that is named as such on the label, and when the lower iron fraction still fits the dose and the capsule. Choose the fumarate when the higher iron fraction, a compact tablet or a lower material mass matters and the colour and solubility fit the product. Both choices start with the label and the market file, not with the powder alone. The two are not interchangeable gram for gram, and a quotation that names only “iron” has not quoted either one. The iron bisglycinate product page carries the chelate specification; the ferrous fumarate product page carries the salt specification; the ferrous gluconate page covers the third common ferrous option; the grade page covers mesh and dilution; the analytical methods are described in the methods library, and how lots are released is described under quality. ### 01 What the COA for manganese bisglycinate actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/manganese-bisglycinate/coa/ Reviewed: 2026-11-19 A manganese bisglycinate certificate carries appearance, IR and HPLC identification, an HPLC assay, a complexometric manganese result, loss on drying, the heavy-metal panel, microbiology and a sieve result. Those two potency numbers describe the same complex from different angles, and the certificate only becomes checkable when each is tied to a method and a moisture basis. The limits in this page belong to the catalog specification; a batch COA is the record for one pack. In one lineThe assay and the manganese figure are two views of one complex, and the certificate is only auditable when each carries its method and its basis. ## The certificate as a test report Each line on a certificate should let a reviewer reconstruct the release decision: what was tested, how, and against which limit. A bare “conforms” gives the conclusion but withholds the evidence. The identification row settles the form; the manganese row settles the metal content. Neither is a purity figure by itself. Identity, assay, moisture and contaminants · manganese bisglycinate | Parameter | Method | Release limit | Appearance | Visual | Off-white to pale pink powder | Identification | IR and HPLC retention | Conforms to the reference | Assay | HPLC | 98.0–102.0% | Manganese (Mn) | Complexometric titration | 25.0–27.5% | Loss on drying | Gravimetric | ≤5.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh ## What the assay and the manganese figure measure The complex is C4H8MnN2O4, one manganese and two glycine ligands, with a formula weight of 203.06 g/mol. Manganese accounts for 54.94 ÷ 203.06 = 27.06% of the anhydrous formula. With an assay of 98.0–102.0% on the dried basis and loss on drying between 0% and 5.0%, the as-is manganese result should fall near 25.2–27.6%. The catalog window of 25.0–27.5% is consistent with that calculation, provided the certificate declares the basis for both numbers. The arithmetic shifts with the basis. An assay of 98.0% on the dried basis and 5.0% water gives about 25.2% manganese as-is; the same assay on an as-is basis with no water gives about 26.5%. The assay row should state “dried basis” or “as-is” directly, and the manganese row should use the same moisture reference. The catalog panel has no glycine line. A 1:2 ratio is therefore an extra test, not a routine certificate row. When the chelate form is the reason for the purchase, request total and free glycine and calculate the ratio; the identity page explains how. ## Release limit versus batch result The limit is the boundary for release; the result is the number obtained from the lot. A certificate that prints the specification range in the result column has not reported a measurement. Put the two in separate columns, with the method alongside. What the result column should contain | Parameter | Release limit | Result column | Assay | 98.0–102.0% | A measured percentage, with the basis and the chromatographic conditions | Manganese | 25.0–27.5% | A measured percentage by titration, on the stated basis | Loss on drying | ≤5.0% | A measured percentage | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot | Particle size | ≥95% through 40 mesh | The measured percentage through the sieve “Passes specification” is the end of the review, not the evidence for it. Microbiology needs a count and an absence statement; the metals panel needs a figure for each element. A summed metal result conceals which element drove it. Manganese is the analyte, not a contaminant, and has no place in that sum. ## What moves between batches Reaction, crystallisation and drying shift the assay, the manganese value and the water figure. Milling and sieving change the particle-size result while the chemistry stays put. Appearance is the least numerical line: the catalog allows off-white to pale pink, and a pink cast is ordinary for manganese(II). A brown or black speck falls outside that description and deserves an investigation for manganese oxide, not a colour waiver. Free glycine is the variable that belongs to a chelate. Extra ligand can leave the manganese and assay lines in range while part of the glycine is unbound, which is why the ratio and the free-glycine result matter in the supplier file even though the catalog panel omits them. One lot near an edge is less informative than a series: manganese falling, water rising, or an extra chromatographic peak. The lot code should be identical on the certificate, the pack and the retained sample. ## When to order an outside test Use an outside laboratory for a new source, a first shipment into a regulated market, a form claim the supplier's certificate cannot support, or a result in dispute. The panel can be targeted rather than a copy of the full certificate: HPLC for assay and identity, complexometric titration for manganese, glycine by HPLC or amino-acid analysis, water by loss on drying, ICP-MS for the metals, microbiology, and XRD or FTIR if the solid form is disputed. Every screen should come with its detection limit, especially XRD. A “not detected” entry with no limit describes the method's reach, not the sample. The laboratory should test the retained sample and name the lot in its report. When the chelate claim is contested, ask for the tests that distinguish forms rather than another assay: total and free glycine, the calculated ratio, XRD for a crystalline second phase, and FTIR for coordination. ## What to compare between suppliers Six lines are enough to compare two suppliers: form and CAS number; assay and basis; manganese and method; total and free glycine, with the ratio; loss on drying; and the contaminant, microbiology and particle-size results. A quotation that matches on manganese but not on the ratio or the basis is a different powder. Traceability is the second layer. The certificate should identify the manufacturer, the manganese source, the chelation and drying steps, and whether anyone blended the material after chelation. A blend can carry the chelate maker's certificate while describing a drum the maker never filled. The catalog specification is on the manganese bisglycinate product hub. The tests that separate the chelate from a blend are on the identity page; the market file is on the compliance page; the chromatographic assay is described in the HPLC method note; the titration is described in the complexometric titration note; the release workflow is on the quality page. ### 02 Manganese bisglycinate, gluconate or sulfate: choosing a form URL: https://nutrition.rainwoodbio.com/products/minerals/manganese-bisglycinate/grades/ Reviewed: 2026-11-19 Manganese is supplied as the bisglycinate chelate, the gluconate salt and the sulfate salt, and the catalog manganese figures are 25.0–27.5%, 11.5–12.5% and 31.5–33.0% respectively. The form decides the label name, the solubility and the mass needed for a given manganese dose before it decides anything else. The choice is a formulation and market-file decision, not a race to the highest manganese percentage. In one lineThe form decides the label name, the manganese per gram and the fill weight; the assay percentage alone does not. ## Why manganese comes in more than one form The three forms are different chemistries, not three grades of one material. Manganese bisglycinate is a chelate: one manganese ion coordinated to two glycine ligands. Manganese gluconate is a salt of gluconic acid. Manganese sulfate is a hydrated inorganic salt. The word on the label has to match the chemistry in the drum, because a chelate and a salt are different dietary ingredients with different CAS numbers. Suppliers offer more than one form because dosage forms differ. A capsule or tablet can take any of the three; a drink mix cares about solubility and solution pH; a high-dose tablet cares about the mass per serving. A form that fits one of those may be a poor fit for another, and the manganese percentage is only one line in the comparison. Within the bisglycinate there is a second question: is the drum one chelate, or a blend of chelate with oxide or sulfate? A blend can reach a manganese figure while failing the chelate description. The identity page deals with that question. ## The three forms side by side Manganese bisglycinate, gluconate and sulfate · catalog comparison | Property | Bisglycinate | Gluconate | Sulfate | Form | 1:2 manganese chelate with glycine | Manganese salt of gluconic acid | Manganese sulfate monohydrate | CAS and formula | 14281-77-7 · C4H8MnN2O4 | 6485-39-8 · C12H22MnO14 | 10034-96-5 · MnSO4·H2O | Manganese | 25.0–27.5% | 11.5–12.5% | 31.5–33.0% | Assay | 98.0–102.0% by HPLC | 98.0–102.0% by titration | ≥98.0% by titration | Water | Loss on drying ≤5.0% | Water ≤1.0% | Water 10.0–12.0% | Appearance | Off-white to pale pink | White to pinkish | Pale pink | Solution | Soluble; acidic | Freely soluble; neutral | Freely soluble; acidic The manganese column drives the fill weight. The assay column is the release gate. The water column is not a ranking: the sulfate's 10–12% is largely water of crystallisation, the chelate's figure is loss on drying, and the gluconate's limit is a Karl Fischer water result. Compare the measurements, not just the numbers. ## Powder, colour, flow and solution All three are free-flowing powders milled to ≥95% through 40 mesh, and granulated versions are available on request. Colour is a useful first check but not an identity test. Manganese(II) is pale pink, so an off-white to pink tint is expected. A dark brown or black speck points to manganese oxide and should be investigated rather than blended away. Solubility separates the forms in a drink mix. The gluconate dissolves freely and gives a neutral solution; the sulfate dissolves freely and the solution is acidic; the bisglycinate is soluble and its solution is acidic. The chelate's acidic solution can shift a pH-sensitive matrix, while the gluconate's neutral solution may suit a ready-to-mix powder. A clear solution is not proof of stability; measure the hold time in the matrix. Flow and dust matter at the filling line. A 40 mesh powder can be dusty, and granulation improves flow while reducing dust. It changes the particle-size line and may change the dissolution behaviour, so the certificate for a granulated pack should carry that pack's particle result. ## Dose arithmetic and the fill Divide the target elemental manganese by the manganese figure of the form. At 25.0–27.5% for the bisglycinate, 2 mg of manganese takes 7.3–8.0 mg of the chelate. At 11.5–12.5% for the gluconate, the same 2 mg takes 16.0–17.4 mg. At 31.5–33.0% for the sulfate, it takes 6.1–6.3 mg. Ingredient mass needed for a target manganese dose | Target manganese | Bisglycinate | Gluconate | Sulfate | 2 mg | 7.3–8.0 mg | 16.0–17.4 mg | 6.1–6.3 mg | 2.3 mg | 8.4–9.2 mg | 18.4–20.0 mg | 7.0–7.3 mg | 10 mg | 36.4–40.0 mg | 80.0–87.0 mg | 30.3–31.7 mg The arithmetic uses the catalog range, not a batch result. A lot's measured manganese figure replaces the range for that lot, and the assay of 98.0–102.0% adds a small correction for active content. The label declares elemental manganese; the ingredient weight is the vehicle, and it should not be confused with the dose. The 10 mg row is arithmetic, not a suggested intake. The finished-product dose is the brand's decision against the destination rules and the total manganese intake from all sources. The fill calculation belongs to the label and the formula, not to the ingredient supplier. ## What to write into the specification - “Manganese bisglycinate, CAS 14281-77-7, C4H8MnN2O4; the material is the chelate, not a blend.” - “Assay 98.0–102.0% by HPLC; manganese 25.0–27.5% by complexometric titration; both on the same stated basis.” - “Loss on drying ≤5.0%; particle size ≥95% through 40 mesh.” - “Total glycine and free glycine by HPLC, with the calculated Mn:glycine ratio, where the chelate form is the purchase decision.” - “Heavy metals and microbiology as listed; no added manganese oxide, sulfate or gluconate.” For the gluconate or the sulfate, the same structure applies with that form's assay, manganese and water limits. A specification written for one form does not transfer to another, even when the manganese target is the same. The bisglycinate versus gluconate comparison works through the fill arithmetic in more detail; the manganese gluconate hub and the manganese sulfate hub carry those catalog specifications. ## When a form is the wrong choice If the label names manganese gluconate, the bisglycinate is not a substitute, even though it carries more manganese per gram. The label ingredient, the CAS number and the market file all change, and the reverse substitution is equally wrong. Any switch needs change control, a fresh specification and a label review. If the formula needs a neutral solution, the gluconate is the easier starting point. If it needs the highest manganese per gram and the label permits the sulfate, the sulfate is the most concentrated of the three, but it carries 10–12% water of crystallisation and its solution is acidic. If the drum is a blend, none of the columns describes it; the blend is its own specification and the blender owns the certificate. The product hub carries the catalog specification; the grades page places this comparison in the range; the analytical methods library explains the tests; the chelate glossary entry defines the term; the quality page describes the release workflow. ### 02.1 Manganese bisglycinate vs manganese gluconate: the chelate, the manganese and the fill URL: https://nutrition.rainwoodbio.com/products/minerals/manganese-bisglycinate/grades/manganese-bisglycinate-vs-gluconate/ Reviewed: 2026-11-19 Manganese bisglycinate and manganese gluconate deliver the same mineral in different packages. The chelate carries 25.0–27.5% manganese and the gluconate 11.5–12.5%, so a 2 mg manganese dose takes about 7.3–8.0 mg of the chelate or 16.0–17.4 mg of the gluconate. The switch changes the label ingredient and the fill weight before it changes the dose. In one lineThe chelate and the gluconate carry the same manganese at different densities, so the label dose sets a fill weight that is roughly twice as large for the gluconate. ## A chelate and a salt are different ingredients Manganese bisglycinate is a chelate: one manganese ion coordinated to two glycine ligands, C4H8MnN2O4, CAS 14281-77-7. Manganese gluconate is a salt: manganese associated with two gluconate anions, C12H22MnO14, CAS 6485-39-8. The names describe different chemistry, and the label has to use the name of the material in the drum. The molecular weights explain the manganese figures. The chelate is 203.06 g/mol and carries 27.06% manganese in the anhydrous complex. The gluconate is 445.24 g/mol and carries 12.34%. The catalog ranges, 25.0–27.5% and 11.5–12.5%, sit around those theoretical values and leave room for moisture and assay tolerance. Manganese bisglycinate against manganese gluconate · catalog values | Property | Manganese bisglycinate | Manganese gluconate | Chemistry | 1:2 chelate of manganese(II) with glycine | Manganese salt of gluconic acid | CAS | 14281-77-7 | 6485-39-8 | Formula | C4H8MnN2O4 | C12H22MnO14 | Manganese | 25.0–27.5% | 11.5–12.5% | Assay | 98.0–102.0% by HPLC | 98.0–102.0% by titration | Water | Loss on drying ≤5.0% | Water ≤1.0% | Appearance | Off-white to pale pink powder | White to pinkish powder | Solution | Soluble; acidic | Freely soluble; neutral ## The manganese figures and the label The two figures are not a quality ranking. They are a concentration: the chelate carries about 2.2 times as much manganese per gram as the gluconate. The midpoint of the chelate range is 26.25%, the midpoint of the gluconate range is 12.0%, and 26.25 ÷ 12.0 = 2.19. The theoretical ratio is 27.06 ÷ 12.34 = 2.19. That factor is the arithmetic behind every fill calculation. The label declares elemental manganese, not the weight of the ingredient. A label that says 2 mg manganese (as manganese bisglycinate) and a label that says 2 mg manganese (as manganese gluconate) declare the same mineral but different ingredients. The “as” line is part of the identity, and it has to match the certificate and the market file. The assay is a second, smaller variable. Both forms are specified at 98.0–102.0%, so the active content moves the weighed mass by a few percent, not by a factor of two. Use the lot's measured manganese figure for the fill and the assay for the release decision. ## What the difference does to the fill The fill arithmetic is division: target manganese ÷ manganese figure = ingredient mass. A lot result replaces the catalog range at the weigh-up. Ingredient mass for a target manganese dose · catalog ranges | Target manganese | Bisglycinate | Gluconate | 2 mg | 7.3–8.0 mg | 16.0–17.4 mg | 2.3 mg | 8.4–9.2 mg | 18.4–20.0 mg | 10 mg | 36.4–40.0 mg | 80.0–87.0 mg At 2 mg, the difference is about 9 mg per capsule, which may not change the capsule size. At 10 mg, the difference is about 45 mg, which can decide between a small and a larger capsule, or between one tablet and two. In a multi-mineral formula, the difference adds to the excipient load and the tablet weight. The 10 mg row is arithmetic, not a recommended intake. The finished-product dose is the brand's decision against the destination rules and total manganese intake from all sources. Most of either powder is not manganese. The chelate is a little over a quarter manganese and the rest is glycine ligand; the gluconate is about one-eighth manganese and the rest is gluconate. That is why the weights differ so much for the same dose, and why the label cannot swap the two forms gram for gram. ## Solubility, solution pH and stability Both forms are water-soluble, but the solutions are not the same. The bisglycinate dissolves to an acidic solution; the gluconate dissolves freely to a neutral solution. In a drink mix, the gluconate's neutral pH is easier on a pH-sensitive matrix, while the chelate's acidic solution may need buffering or a shorter hold. In a capsule or tablet, the difference matters less because the powder is swallowed, not dissolved. A soluble powder is not automatically a stable solution. The chelate is specified at loss on drying ≤5.0% and the gluconate at water ≤1.0%; the chelate's specification allows more water, so the pack and the humidity control matter more. In solution, manganese(II) can oxidise as the pH rises, and a brown colour or precipitate is the visible sign. Test the hold time in the real matrix rather than assuming that a soluble powder makes a stable drink. The gluconate's larger fill can also affect mouthfeel and suspension in a stick pack. A 2 mg dose is a small amount of either powder; a 10 mg dose is a visible amount of the gluconate, and the carrier or the serving size has to accommodate it. ## What the switch does to the label and the file The label name follows the form. In the EU, the nutrition declaration gives the manganese amount per portion and the percentage of the 2 mg NRV. In the US, the Supplement Facts panel names manganese and the “as” line names the form; the Daily Value is 2.3 mg. The exact wording and the market file are the brand's regulatory team's decision. A switch from gluconate to bisglycinate changes the ingredient name, the CAS number and the fill weight. The manganese declaration stays the same, but the “as” line and the ingredient list change. If the label says gluconate and the drum is bisglycinate, the label is wrong even when the manganese figure matches. The market file may cover one form and not the other. The current positive list, the notification and the claim file are form-specific; a switch requires change control and a destination review, not only a new COA. ## When to choose which Choose the bisglycinate when the label or the formulation calls for the chelate, when the manganese dose is low and the capsule fill is tight, or when the acidic solution is acceptable in the matrix. Choose the gluconate when the label calls for the salt, when a neutral solution is wanted, or when the larger fill is acceptable for the dose. Neither form is a drop-in for the other. The manganese figure, the fill weight, the solution pH and the label name all change. If the market file covers only one form, the other is outside it even when the assay is higher. The bisglycinate hub carries the catalog specification; the manganese gluconate hub and the manganese sulfate hub carry the other forms; the grades page places this comparison in the range; the identity page gives the tests that separate the chelate from a blend; the bisglycinate glossary entry defines the term; the quality page describes the release workflow. ### 03 Manganese bisglycinate: moisture, pH and the pack URL: https://nutrition.rainwoodbio.com/products/minerals/manganese-bisglycinate/stability/ Reviewed: 2026-11-19 Manganese bisglycinate is a moisture-sensitive powder. In a sealed, dry pack the chelate is expected to hold its assay, but in a formula the risks are water, an alkaline pH and redox-active ingredients that can change manganese(II) to a brown oxide. The retest period is set from data on the actual pack and its storage condition; the COA does not supply it. In one lineThe powder's risk is moisture; the formula's risk is a wet, alkaline or oxidising environment that lets manganese change oxidation state. ## The dry powder: moisture, colour and flow The catalog limit is loss on drying ≤5.0%. That is a release gate, not a storage allowance. After the pouch is opened, the powder can pick up water from the air; loss on drying rises, the as-is assay falls and the powder may cake or lose flow. A sealed liner, a dry store and a closing routine between weighings are part of the practical specification. The chelate also carries an amino acid ligand. In a warm, humid blend with a reducing sugar, glycine can take part in browning, and the colour change may appear before the manganese assay moves. That is a formula risk rather than a bulk-powder risk, but it belongs in the stability plan for a stick pack or a chew. Colour is a useful signal. Off-white to pale pink is the catalog appearance, and a pink tint is normal for manganese(II). A dark brown or black speck is not a colour variant; it suggests manganese oxide, and the lot should be investigated rather than released on assay alone. ## In solution: pH, oxygen and heat The chelate is soluble in water and the solution is acidic. In solution, the manganese is no longer protected by the dry crystal, and pH, oxygen and heat act together. Manganese(II) is most stable in acidic solution; as the pH rises, oxidation to manganese(III) and manganese(IV) species becomes more likely, and a brown precipitate or a darkening colour can appear. Chelation slows that change but does not stop it. A clear liquid at neutral pH, with dissolved oxygen and a warm fill, is the least favourable combination. If a liquid is unavoidable, keep the pH low, reduce dissolved oxygen, validate the hold time and run the stability study in the real matrix. A bulk-powder result does not transfer to a beverage. An open or loosely capped bottle is not a hold container; it lets oxygen in and lets the solution change while it waits. The main variables are pH, oxygen and heat, not light alone. ## What drives degradation Factors that move manganese bisglycinate during storage | Factor | Effect | Control | Water | Higher loss on drying; caking; lower as-is assay | Sealed pack; dry store; desiccant where needed | Alkaline pH | Oxidation of manganese(II); brown colour or precipitate | Buffer and trial the final pH | Oxygen | Oxidation in solution and at wet surfaces | Low headspace; deaerate; sealed pack | Heat | Faster moisture and oxidation reactions; browning with reducing sugars | Cool process; controlled store | Reducing sugar | Maillard browning with the glycine ligand | Non-reducing carrier; lower water activity | Redox-active ingredients | Can change the manganese oxidation state in a wet blend | Sequence the addition; trial the blend These factors are not independent. A warm, humid, alkaline blend is worse than the sum of three separate effects, and a neutral solution in an open tank combines oxygen and pH at once. The useful question is narrower: which pack, which storage condition, and how long? ## A stability protocol for the ingredient State the pack, the condition, the time points and the tests. A warehouse study can use 25 °C/60% relative humidity for the long term and 30 °C/65% for the intermediate condition, with 40 °C/75% as the accelerated stress leg. Add an open-pack arm for the in-use period and a matrix arm for the finished dosage form. At each pull, test assay, manganese, loss on drying, appearance, identity and microbiology. For a liquid or a stick pack, test the matrix at its process pH and heat load, and add colour and any relevant physical test. Ask for the individual results rather than a pass statement, with the pack and the lot family identified. The bulk study does not replace the finished-product study. A drum that passes at 40 °C does not prove that a capsule or a drink will hold its label claim. The finished product is what carries the date. ## The finished formula changes the answer Capsules and tablets keep water activity low, yet the shell and the excipients can still move moisture into the fill. Test loss on drying at release and again after storage, and inspect the fill's appearance. An alkaline excipient, such as magnesium oxide or calcium carbonate, can raise the local pH in a blend; that is the condition to test, not only the pH of the ingredient alone. A stick pack depends on the seal. A pinhole or a weak seam lets humid air in, and the powder picks up water at the surface. Inspect the strip as well as the powder, and include the pack in the study. A liquid combines pH, oxygen, heat and the matrix. The formulator decides whether an overage is needed; that decision belongs to the label and the stability file, and it cannot compensate for a pack that admits oxygen or water. ## How the shelf life is set No single shelf-life figure is published, since the pack and its storage condition determine the period. The retest period is written into the specification and backed by the stability file for that pack. A figure with no pack, no condition and no test panel is a claim, not a shelf life. When the retest period ends, assay the retained sample again before extending use. Do not extend on assumption, and do not transfer a bulk figure to a repacked container. A repack has a new surface, a new headspace and a new opening history. The product hub lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the analytical methods library describes the assays; the quality page describes the release workflow. ### 04 Manganese bisglycinate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/manganese-bisglycinate/moq/ Reviewed: 2026-11-19 One kilogram is the minimum order, packed as a 1 kg foil pouch; a 25 kg fiber drum is the bulk unit, and the standard pack ships in 1–7 days. A firm quotation needs the form and CAS number, the assay and manganese figures, the pack, the destination and the documents. The minimum exists to keep a lot, its certificate and its retained sample together, not to set a project size. In one lineThe minimum is one kilogram because the pack, the lot code and the retained sample have to stay together from the first trial to the production order. ## Why the minimum is 1 kg The first kilogram does three jobs: it supports a bench trial, it provides the retained sample, and it gives an independent laboratory enough material for identity and contaminant testing. It also travels as a parcel, which matters when a formulator needs powder before the production plan is fixed. The pack carries a lot code, so the trial batch can be traced to the same certificate. A smaller order is typically drawn from a bulk lot and repacked, which adds handling, breaks the original pack identity and complicates traceability without changing the powder. The drum lowers handling per kilogram, but it ties up inventory and holds the chelate in storage longer, so the bulk pack is a commitment as well as a convenience. The minimum order is a pack decision. It says nothing about the size of the project and nothing about the specification. ## Packs and formats Standard manganese bisglycinate packs | Format | Fill | Use | Watch | Foil pouch | 1 kg | Trials, samples, small batches | Reseal after opening; the seal is the moisture barrier | Fiber drum | 25 kg | Production | Keep the inner liner closed; record the opening date | Granulated powder | On request | Flow and dust control | Particle profile changes; new specification line The catalog powder is milled to ≥95% through 40 mesh. Granulation is a specification change, not a packing option; it alters the particle-size line and may alter the lead time. Say so before the quotation if the filling line needs a freer flow or less dust. The pouch and the drum protect the chelate from moisture in different ways. The pouch relies on its foil and its seam; the drum relies on the inner liner. Both need a dry store and a closing routine between weighings. ## Lead time and dispatch The standard pack is offered at 1–7 days after order confirmation. That covers picking, documents and dispatch. It does not cover freight transit, customs clearance or the customer's own quality release. A granulated or non-standard pack adds time, and the quotation should show it as a separate line. Request the dispatch date as well as the lead time. A pouch may move as a parcel and a drum on a pallet; the Incoterm allocates freight booking and customs entry. Send the documents with the lot rather than after it. ## What a quotation needs A quotation is firm enough to compare when it states six things: Six details that make a quotation comparable | Item | What to state | Product and form | Manganese bisglycinate, CAS 14281-77-7, with the chelate written out | Specification | Assay and basis, manganese range, loss on drying, particle size, contaminants; add glycine and the ratio if the chelate form is the purchase decision | Quantity and pack | Pouch (1 kg), drum (25 kg) or a granulated variant | Destination and Incoterm | Country, port or delivery address, and the trade term | Documents | COA, specification, SDS and any market statement the importer needs | Intended use and market | Supplement, food or another use, and where it will be sold A quotation that omits the form or the market is incomplete. The same powder can fit one destination and fall outside the file for another; the paperwork is part of the offer. Commercial terms are on the quotation, not on this page. ## The sample is a lot, not a demonstration Qualification starts with the 1 kg pack. Test identity, assay, manganese, loss on drying and microbiology before scaling, and retain a sample from that pack. Sample, COA and quotation should carry the same lot code. A sample with no traceable lot is a demonstration, not a qualification. If the trial needs less than 1 kg, raise it before the order. Material drawn from a bulk lot is repacked with separate traceability, not the catalog pack, and the paperwork should say so. A bench sample and the production drum may come from different lots; check before assuming. ## Terms to settle before the first order Commercial terms, trade term, pack, lead time and documents all come from the quotation. The quality side should sit next to them: specification revision, COA per lot, retained sample, retest period and change control. Settle a quality agreement before the first production order rather than after a dispute. Returns and replacements are governed by the quotation and the quality agreement. A failed lot is handled through the retained sample and a joint re-test; a photograph of the powder is not evidence. Agree the referee laboratory and who bears its fee. The product hub carries the catalog specification; the COA page lists the release tests; the compliance page covers the market files; the MOQ glossary entry defines the term; the logistics page covers shipping and documents; the quality page describes the release file. ### 05 The regulatory file for manganese bisglycinate URL: https://nutrition.rainwoodbio.com/products/minerals/manganese-bisglycinate/compliance/ Reviewed: 2026-11-19 The regulatory file for manganese bisglycinate is built around the exact form, the destination and the finished-product route. The buyer's regulatory team confirms whether the supplement route or the food-additive route applies. This page sets out the framework, the limits and the documents to hold, so the specification and the shipment can be checked as one file. In one lineA compliant file starts with the exact form on the label and ends with the destination's current text; the certificate sits in the middle. ## What the file contains Four questions shape the file. Which material and specification version are being purchased? Which lot is up for release, and what numbers does its COA carry? Which limits and label rules govern the finished product? What happens if the source, process or pack changes? The COA covers the lot, the TDS covers the specification and the SDS covers handling; no single one of them settles the route. Allergen, GMO, irradiation, animal-derived, origin and residual-solvent statements belong in the file, together with any customer-specific declaration. If a statement is missing for the lot, say so before the order rather than at the port. ## European Union The EU framework begins with Directive 2002/46/EC on food supplements, which sets positive lists of vitamins and minerals and the forms in which they may be used. The current Annex II text, including amendments, decides whether the exact form is listed; the buyer's team confirms the entry and the specification attached to it. Food law, labelling and contaminant rules run alongside that listing. Regulation (EU) No 1169/2011 sets the food information rules and the nutrient reference values. Manganese has an NRV of 2 mg, so the label percentage is calculated against that figure. Regulation (EC) No 1924/2006 governs nutrition and health claims, Regulation (EU) No 432/2012 lists the authorised health claims, and Regulation (EU) 2023/915 sets the contaminant limits. The consolidated text, not a summary, is the reference as of this review. Whether a novel-food authorisation or a specific national rule applies is a separate question. The supplement route and the food-additive route are not interchangeable, and the buyer's regulatory team confirms the route for the destination. ## United States The US framework begins with the dietary-supplement definition in section 201(ff) of the Federal Food, Drug and Cosmetic Act. The ingredient file should name the basis it relies on: a new dietary ingredient notification, a GRAS conclusion, or evidence of marketing before 15 October 1994. The supplier can support that file, but the buyer decides whether the basis extends to the finished product and its intended use. 21 CFR 111 sets the cGMP requirements, including identity testing of components, supplier qualification and batch records. 21 CFR 101.36 sets the Supplement Facts panel; the Daily Value for manganese is 2.3 mg for adults and children four years and older. The source line should name manganese bisglycinate and match the specification. Structure/function claims are allowed when they are truthful, not misleading and substantiated, with the DSHEA disclaimer required by 21 CFR 101.93 and the notification to the FDA within 30 days of first marketing. No disease-related claim is allowed. The FDA does not approve the supplement or the label before sale, so the marketer's file carries the evidence. ## Contaminants and intake references Contaminants are judged at the finished-product level, not only in the drum. The table gives a working starting point for an EU supplement file; the destination text and the daily dose settle the final figure. Limits and references to confirm for the finished product | Parameter | Working reference | Evidence the file needs | Lead (Pb) | 3.0 mg/kg in the finished supplement | Result, method, limit and the dose conversion | Cadmium (Cd) | 1.0 mg/kg in the finished supplement | Result and any category exception | Mercury (Hg) | 0.10 mg/kg in the finished supplement | Result and method | Arsenic (As) | No harmonised EU limit; the buyer sets one | Agreed limit, method and detection limit | Manganese (Mn) | EFSA 2023 safe level: 8 mg/day for adults, total intake | Dose per portion and total intake from all sources The manganese row is an intake reference, not a contaminant limit. EFSA's 2023 opinion established a safe level of intake of 8 mg/day for adults, with lower levels for other groups. The finished-product dose is the brand's calculation. Check the current EFSA text and the national guidance. In the US there is no federal maximum level for manganese in dietary supplements; the cGMP rule sets process and identity requirements rather than a metal limit. ## Label and claims An EU nutrition claim such as “source of manganese” has a condition: the daily portion must supply at least 15% of the 2 mg NRV, which is 0.3 mg. A health claim must match the authorised wording and conditions in Regulation (EU) No 432/2012; the list contains manganese entries, and the brand's reviewer checks that the finished product meets the condition. No disease-related claim is allowed. In the US, a structure/function claim describes the role of a nutrient in normal structure or function. It must be truthful, not misleading and substantiated, and it carries the DSHEA disclaimer; the marketer notifies the FDA within 30 days of first marketing. No disease-related claim is allowed. The label names the form, and the claim file is separate from the certificate. Claims are not approved by a certificate, and a claim does not rewrite the specification. Keep the wording, the substantiation and the artwork in one version-controlled file. ## Documents the file needs - Specification: form, CAS number, assay basis, manganese range, loss on drying, particle size, contaminants and microbiology. - Batch COA: method and result for each line, not only a pass statement. - TDS and SDS for the grade and pack. - Contaminant report against the destination limits, with an arsenic limit where the buyer sets one. - Allergen, GMO, irradiation, animal-derived input and residual-solvent statements for the lot. - Origin record and change-control statement for the source, process and pack. - Nutrition worksheet and claim file for the finished product. A specification and a COA are not the same document: the first states what will be supplied, the second records what one lot measured. Holding only one leaves half the file unanswered. ## Checklist before the first order - The specification version, CAS number and exact form are stated. - COA, TDS, SDS, allergen, GMO, origin and residual-solvent statements are present. - Contaminant results have been converted to the finished-product dose. - The manganese dose is checked against the EFSA safe level and the destination rules. - Label and claim have been reviewed for the destination market. - Source, process and pack sit under change control. The product hub carries the catalog specification; the COA page explains the lot certificate; the identity page covers the analytical evidence; the EU regulatory note and the US regulatory note give the framework references; the quality page describes the release file. ### 06 How we prove a manganese bisglycinate lot is the chelate URL: https://nutrition.rainwoodbio.com/products/minerals/manganese-bisglycinate/identity/ Reviewed: 2026-11-19 A manganese bisglycinate lot is the chelate when the document names the form and CAS number, the manganese and glycine figures calculate to a 1:2 ratio, the solid-state tests show a coordinated complex rather than a blend, and the certificate discloses everything in the drum. The manganese assay alone cannot separate the chelate from manganese oxide, manganese sulfate or manganese gluconate. Identity is the agreement of those lines, not a single percentage. In one lineIdentity is the agreement of manganese, glycine, their ratio and the solid form; a manganese percentage on its own identifies nothing. ## The identity layers A certificate may carry the right name and still leave the material unproven. Each layer asks a different question and needs its own evidence. Answering only the first question tells you about the paperwork, not the powder. Five layers of manganese bisglycinate identity | Layer | Question | Test | What it proves | Document | Is the form named? | Name, CAS number, formula | Paperwork only | Elemental | How much manganese? | Complexometric titration | The metal, not the ligand | Ligand | How much glycine? | HPLC, total and free | The ligand, not the ratio | Stoichiometry | Is the ratio 1:2? | Calculation from the two assays | Agreement with the chelate | Solid state | Is it coordinated? | XRD and FTIR | The solid form, not the purity ## The manganese-to-glycine ratio The formula is C4H8MnN2O4: one manganese to two glycine ligands. The formula weight is 203.06 g/mol, and the manganese fraction is 54.94 ÷ 203.06 = 27.06% in the anhydrous complex. Glycine, reported as the free amino acid after hydrolysis, is about 73.9% of that formula weight. The two figures sum to slightly more than 100% because hydrolysis adds the protons that the ligand did not carry in the complex; that is arithmetic, not a mass-balance failure. To calculate the ratio, convert each result to moles: manganese ÷ 54.94, glycine ÷ 75.07. Divide the glycine moles by the manganese moles. A true 1:2 complex gives 2.00. The two results must be on the same moisture basis; an as-is manganese figure divided by a dried-basis glycine figure is not a ratio. Free glycine completes the ligand picture. A total-glycine result includes ligand that is bound and ligand that is loose, so a high total paired with a high free figure points to added glycine, not extra chelate. A normal manganese result with a low glycine figure suggests a second manganese source or a carrier. Because the catalog panel has no glycine line, the ratio is an extra test; order it when the chelate form is the reason for the purchase. ## XRD and FTIR: the solid-state check X-ray diffraction answers a structural question: is there a crystalline second phase, and does the pattern match a reference? For a chelate, the most useful target is a crystalline manganese oxide or sulfate in a blend. XRD is not a purity assay, and an amorphous second source may not appear. A report that says “absent” without a detection limit has not answered the question. FTIR examines the ligand side of the same sample. A reacted chelate gives different carboxylate and amine bands from a dry mix of manganese salt and glycine, because coordination shifts those bands. The spectrum is evidence of coordination, not a quantity; it cannot say what fraction of the drum is chelate. Neither method replaces the elemental and ligand assays. A lot that passes manganese, glycine and the ratio but contains a crystalline oxide can still be a blend; a lot that passes XRD but has a low glycine figure is not the chelate. The methods are read together. ## What adulteration looks like Common manganese bisglycinate substitutions and the signals | Adulterant | What it does | Signal | Test | Manganese oxide | Lifts manganese above the chelate figure; lowers the glycine share | Manganese high; ratio low; dark specks | XRD, titration, glycine | Manganese sulfate | Lifts manganese; adds sulfate and water | Manganese high; water high; sulfate detected | Ion chromatography, Karl Fischer, XRD | Manganese gluconate | Lowers manganese and adds a different anion | Manganese low; glycine low; gluconate detected | HPLC, FTIR, titration | Added glycine | Raises total and free glycine; masks a low chelate share | Free glycine high; ratio high | HPLC free glycine, ratio | Carrier or dilution | Lowers manganese and glycine together | Both low; mass balance | Assay, loss on drying, microscopy | Moisture | Raises loss on drying; lowers the as-is assay | Loss on drying high; as-is assay low | Loss on drying Appearance is the weakest evidence; a blend can sit inside the off-white to pale pink window. The ratio, the free-glycine result, the water figure and a crystalline phase are the stronger signals. A certificate that shows only appearance and manganese has not tested the ligand at all. ## How to write the identity into the specification - “Manganese bisglycinate, CAS 14281-77-7, C4H8MnN2O4; the material is the chelate, not a blend.” - “Assay 98.0–102.0% by HPLC; manganese 25.0–27.5% by complexometric titration; both on the same stated basis.” - “Total glycine and free glycine by HPLC; the Mn:glycine ratio can be agreed at 1.95–2.05.” - “Loss on drying ≤5.0%; particle size ≥95% through 40 mesh.” - “XRD: no crystalline manganese oxide or sulfate detected, with the detection limit reported; FTIR coordination on request.” - “No added manganese oxide, sulfate or gluconate; the blender, if any, is named on the certificate.” ## Five questions for the supplier - Is the lot one chelate, or a blend? If it is a blend, what are the components and their proportions? - What are the manganese and glycine results for this lot, and on what basis was each reported? - What ratio do the results give, and what is the free-glycine result? - Does an XRD report cover crystalline manganese oxide or sulfate, and what detection limit does it quote? Can you supply an FTIR spectrum? - Which manganese source and drying step were used, and was the material blended after chelation? Those five answers, taken together, make up an identity file. A single manganese percentage does not. The product hub carries the catalog specification; the COA page shows where each figure sits on the certificate; the grades page compares the forms; the level-four comparison covers the fill and label consequences; the XRD note and the FTIR note describe the solid-state methods; the HPLC note explains the ligand assay. ### 01 What a manganese gluconate certificate has to show URL: https://nutrition.rainwoodbio.com/products/minerals/manganese-gluconate/coa/ Reviewed: 2026-11-19 A manganese gluconate certificate carries two numbers that matter more than the rest: the elemental manganese result and the salt assay calculated from it. Around them sit appearance, infrared identity, water, the contaminant panel, microbiology and particle size. The limits discussed here are catalog limits; the certificate for a lot carries the measured values. In one lineThe certificate has to show the manganese figure and the salt assay from the same titration, with water beside them, because the label dose and the fill weight are calculated from the element. ## The certificate as a test report A laboratory report is auditable when every row names the parameter, the method, the limit and the result. A sheet whose result column repeats the limit is a specification with a letterhead. The table below sets out the lines the catalog requires and the method behind each one. Identity, assay, water and condition · manganese gluconate | Parameter | Method | Release limit | Appearance | Visual | White to pinkish powder | Identification | Infrared spectrum and complexometric titration | Conforms to the reference | Assay | Complexometric titration | 98.0–102.0% | Manganese (Mn) | Complexometric titration | 11.5–12.5% | Water | Karl Fischer | ≤1.0% | Heavy metals | ICP-MS | Pb ≤3, As ≤2, Cd ≤1, Hg ≤0.1 (mg/kg) | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast/mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh A reader should be able to tell three questions apart. Identification asks whether the material is manganese gluconate. The manganese line asks how much of the element is present. The assay asks how much salt that element represents. Appearance and mesh describe the powder; contaminants and micro describe the rest of the drum. ## One titration, two figures The titration is an elemental measurement. EDTA complexes manganese in a one-to-one ratio, so the volume of titrant reports manganese, and the laboratory multiplies by a formula factor to obtain the salt. For C12H22MnO14, the molar mass is about 445.2 g/mol and manganese accounts for 54.94, or 12.34%. Dividing 445.2 by 54.94 gives 8.10, the factor that turns a manganese percentage into a salt percentage. Audit the pair with that factor. 12.2% manganese calculates to about 98.8% salt, a consistent pair. A sheet that prints 11.8% manganese next to 101.0% assay cannot be right both ways: 11.8% corresponds to about 95.6% salt. Each figure may be inside its own catalog range and the two still not belong to one powder, so the sheet should say which was measured and which was derived. The water result decides the basis. With a ceiling of 1.0% by Karl Fischer, as-is and dried values differ only slightly, but slightly is not the same as not at all. The assay row should state whether the water correction was applied; the water row should carry a measured percentage. ## Release limit versus batch result The limit is the release gate; the result is the evidence. Keep them in separate columns and put the method between them. Reading a result column against its limit | Parameter | Release limit | Result column | Assay | 98.0–102.0% | The measured percentage, the basis and the method | Manganese | 11.5–12.5% | The measured element percentage from the same titration | Water | ≤1.0% | The measured percentage by Karl Fischer | Identification | Infrared and titration conform | The reference or spectrum file named | Heavy metals | Pb ≤3, As ≤2, Cd ≤1, Hg ≤0.1 mg/kg | A result for each element, in mg/kg | Particle size | ≥95% through 40 mesh | The measured percentage passing the sieve Water and manganese are the two lines where a number matters more than a tick. At 0.9% water the lot is inside the limit but close to the ceiling, and a humid store will push it. Because the assay is calculated from the manganese with the 8.10 factor, the two catalog ranges only overlap between about 12.1% and 12.5% manganese; at 12.1% the same dose needs about 3% more powder than at 12.5%. Neither result is a defect, but both change the weigh-up, and a buyer who reads only one limit will miss them. ## What moves between lots Manganese and assay rise and fall together, since one is derived from the other. Reaction, crystallisation and drying move both. Water follows the drying endpoint and the pack. The sieve result follows the mill, and a site change can move it without touching the chemistry. Colour tells a limited story. The normal range is white to pinkish, and the pink is the manganese. Grey or brown, or dark particles, suggests oxidation or foreign matter and should send the reader to the batch record. Bulk density and flow are not catalog lines, yet they determine whether a capsule line runs or bridges. Trace the lot code from the certificate to the pouch, the drum and the retained sample, and record the site and the specification revision behind the release. ## When an outside test is worth ordering Outside testing earns its place in four cases: an unfamiliar source, a first entry into a regulated market, a form question the supplier's sheet does not settle, and a disagreement between two laboratories. Keep the panel narrow: a second EDTA titration, an infrared scan against a gluconate standard, Karl Fischer water, ICP-MS for the four metals, and a sulfate limit test if a sulfate blend is suspected. X-ray diffraction is the addition when a crystalline sulfate phase is the question. A glucose or maltodextrin screen is the addition when dilution is the question. Every screen needs a detection limit; without one, “not detected” describes the method. Handle the sample as evidence. The laboratory should receive the retained portion, and the report should name the lot, the weight and the basis. ## Comparing two suppliers Two offers are comparable only on the same six lines: the salt and CAS number; the manganese and assay figures with the factor; the water result; the identity methods and the reference; the contaminant and micro results; the mesh and the pack. Agreement on manganese alone proves very little. Behind the certificate sits traceability: the manufacturer, the manganese source, the drying step, and whether the paper matches the container. A genuine certificate for another lot is still the wrong certificate. The catalog ranges are on the manganese gluconate product page. The anion and ratio tests are set out on the identity page; the three manganese sources are compared on the grade page; the regulatory file is on the compliance page; release practice is on the quality page. The EDTA method is described in the complexometric method note. ### 02 Manganese gluconate grades: the salt, the powder and the fill URL: https://nutrition.rainwoodbio.com/products/minerals/manganese-gluconate/grades/ Reviewed: 2026-11-19 Manganese gluconate is a single salt, yet two choices sit behind the name: the manganese source on the label and the powder grade on the line. The gluconate reports 11.5–12.5% manganese, the sulfate monohydrate 31.5–33.0% and the bisglycinate 25.0–27.5%, so the source decides how much powder a dose needs. Within the gluconate, the grade decides mesh, flow and water. In one lineThe grade question has two layers: which manganese salt the label names, and which powder the line can fill; the salt sets the manganese figure, and the powder sets the fill. ## One salt, two decisions No granulation changes the manganese percentage. The formula sets it, and a granulated lot and a standard lot from one batch will report the same figure. What the powder grade changes is behaviour: how the material runs through a hopper, how much space it takes in a capsule or sachet, and how much dust it makes at the weigh station. The source choice comes first and is a different kind of decision. Three manganese salts with three CAS numbers sit in the catalog, and each carries its own label name. An order that says only “manganese” has not chosen among them; the label, the fill and the market file all hang on which salt is meant. ## The manganese sources side by side The table compares the three catalog sources on the lines that change a formula. Three manganese sources in the catalog | Property | Gluconate | Sulfate monohydrate | Bisglycinate | CAS number | 6485-39-8 | 10034-96-5 | 14281-77-7 | Manganese | 11.5–12.5% | 31.5–33.0% | 25.0–27.5% | Salt per 1 mg manganese (theoretical) | About 8.1 mg | About 3.1 mg | About 3.8 mg | Water on the certificate | ≤1.0%, Karl Fischer | 10.0–12.0%, Karl Fischer | ≤5.0%, loss on drying | Solution | Freely soluble; neutral | Freely soluble; acidic | Soluble; acidic | Label name | Manganese gluconate | Manganese sulfate | Manganese bisglycinate The comparison is arithmetic, not a ranking. Per milligram of manganese the gluconate needs roughly 2.6 times the mass of the sulfate and 2.1 times the mass of the chelate, because most of the gluconate molecule is the acid rather than the metal. The sulfate is the concentrated salt; the bisglycinate is a chelate with a glycine ratio of its own. Which one belongs in a formula is a label and dosage-form question. ## The powder: mesh, flow and water The catalog gluconate passes 40 mesh at 95% or better. It dissolves freely and leaves a neutral solution, so dissolution is not the issue at this particle size. The issue is water: the powder takes moisture from the air and cakes under load, and a drum that is opened repeatedly has more exposure than a pouch that is used once. Granulation is a new specification rather than a bigger pack. It changes the sieve line, usually raises density and cuts dust, and may introduce a binder that has to be declared and checked. Capsule lines generally do well with the standard powder; a tablet press is where the granulated option should be trialled. Density is not a catalog line. Ask for the measured value and the method, because two lots that both pass the sieve can pack differently enough to change a fill. ## Dose arithmetic and the capsule At 2 mg manganese, at the catalog midpoints, the gluconate weighs about 16.7 mg, the sulfate about 6.2 mg and the bisglycinate about 7.6 mg. In a normal capsule that is a small fraction of the fill, so the carrier and the mixing step decide uniformity, not the salt. Salt mass for a manganese dose, at the catalog midpoints | Elemental manganese | Gluconate at 12.0% | Sulfate at 32.3% | Bisglycinate at 26.3% | 2 mg | About 16.7 mg | About 6.2 mg | About 7.6 mg | 5 mg | About 41.7 mg | About 15.5 mg | About 19.0 mg | 10 mg | About 83.3 mg | About 31.0 mg | About 38.0 mg Use the table for planning, then reset the target from the lot certificate. The published manganese range spans 8.7 mg of gluconate per milligram at 11.5% to 8.0 mg at 12.5%; the assay gate narrows the usable window, but the lot certificate still sets the fill. A high-dose product changes the picture. A 500 mg capsule of gluconate holds about 60 mg manganese; the same fill of sulfate holds about 160 mg. A large manganese target therefore favours the sulfate or the chelate, while a small target is easier to blend with the bulkier gluconate. ## What to write into the specification - “Manganese gluconate, CAS 6485-39-8, formula C12H22MnO14.” - “Complexometric assay 98.0–102.0%, with the basis named on the certificate.” - “Manganese 11.5–12.5% and water ≤1.0% by Karl Fischer on the same lot.” - “Infrared identity against a named reference, confirmed by titration.” - “At least 95% through 40 mesh; density reported with its method.” - “Any granulation declared, with the processing aid named.” - “Contaminants and microbiology as listed in the catalog.” ## When a grade change is the wrong answer Granulation solves flow and dust. It does not turn the gluconate into the sulfate or the chelate, and it does not repair a label that names another salt. A formula that needs the chelate needs the chelate. Neither does a grade change fix water. The pack and the store do; the stability page describes the behaviour after opening. The catalog ranges are on the product page. The gluconate against the sulfate is taken further on the level-four comparison; the sulfate has its own product page; the chelate is described on the manganese bisglycinate page; the release tests are on the COA page. ### 02.1 Manganese gluconate vs manganese sulfate: elemental manganese and the fill URL: https://nutrition.rainwoodbio.com/products/minerals/manganese-gluconate/grades/manganese-gluconate-vs-sulfate/ Reviewed: 2026-11-19 The two salts differ in the manganese they carry: manganese gluconate is specified at 11.5–12.5% manganese, the sulfate monohydrate at 31.5–33.0%. One milligram of manganese therefore takes about 8.1 mg of gluconate or about 3.1 mg of the monohydrate, a factor of roughly 2.6. That difference sets the fill weight, the blend and the label name before it sets anything about the powder. In one lineThe sulfate carries about 2.6 times the manganese of the gluconate per gram, so the same dose is a different fill weight, a different label name and a different water figure. ## Two manganese salts, two identities Manganese gluconate, CAS 6485-39-8, is the manganese salt of gluconic acid, C12H22MnO14, with a molar mass of about 445.2 g/mol. Manganese sulfate monohydrate, CAS 10034-96-5, is the inorganic salt MnSO4·H2O, with a molar mass of about 169.0 g/mol. Both deliver manganese in the same oxidation state; neither is a chelate. The gluconate is the larger molecule, and most of its mass is the gluconate anion rather than the metal. Manganese gluconate and manganese sulfate monohydrate | Property | Gluconate | Sulfate monohydrate | CAS number | 6485-39-8 | 10034-96-5 | Formula | C12H22MnO14 | MnSO4·H2O | Molar mass | About 445.2 g/mol | About 169.0 g/mol | Manganese | 11.5–12.5% | 31.5–33.0% | Salt per 1 mg manganese (theoretical) | About 8.1 mg | About 3.1 mg | Water | ≤1.0%, Karl Fischer | 10.0–12.0%, Karl Fischer | Appearance | White to pinkish powder | Pale pink powder | Solution | Freely soluble; neutral | Freely soluble; acidic | Label name | Manganese gluconate | Manganese sulfate ## The manganese figure and the dose arithmetic The theoretical manganese content follows from the formula. For the gluconate it is 54.94 ÷ 445.2 = 12.34%; for the sulfate monohydrate it is 54.94 ÷ 169.0 = 32.50%. The catalog ranges sit around those values, and the sulfate's 10–12% water is part of the weighed powder, so its manganese figure is already expressed on the as-received basis. At the catalog midpoints, a 2 mg manganese dose needs about 16.7 mg of gluconate or about 6.2 mg of the sulfate monohydrate. At 5 mg the masses are about 41.7 mg and 15.5 mg; at 10 mg they are about 83.3 mg and 31.0 mg. The arithmetic is not a dose recommendation; it is the step between the label figure and the weigh-up, and it has to use the lot certificate rather than the catalog midpoint. The range matters as much as the midpoint. At 11.5% manganese the gluconate needs 8.7 mg per milligram of manganese; at 12.5% it needs 8.0 mg. Applying the assay gate narrows the usable window to about 12.1–12.5%, but even that window moves a fill by about 3%, enough to miss a capsule target set on the catalog midpoint. The sulfate's water belongs on the same certificate because it shifts the as-received manganese figure. ## Solubility, solution and water Both salts are freely soluble in water, so a drink mix or a stick pack can use either. The solutions are not equivalent. Manganese gluconate gives a neutral solution, while manganese sulfate gives an acidic one, and that difference moves the pH of the finished drink, the taste and the rate of oxidation. A formulator who switches the salt without rechecking the pH has changed the matrix, not only the ingredient. Water on the certificate is the other difference. The gluconate is specified at no more than 1.0% by Karl Fischer; the sulfate monohydrate carries 10.0–12.0% water as part of its structure. The sulfate's water is not free moisture, but it is mass that carries no manganese, and it is the reason the sulfate's manganese figure is lower than the anhydrous salt's 36.4%. A specification that compares the two salts on a dried basis is comparing two different powders. In solution both salts release manganese(II), and both are exposed to the same oxidation risk. Light, dissolved oxygen and heat are the variables to control in either case. ## The fill weight and the blend At a 2 mg manganese dose the salt is a small part of a normal capsule. In a 500 mg fill the gluconate is about 3.3% of the powder and the sulfate about 1.2%, so most of the capsule is carrier either way. The gluconate's larger mass is an advantage at that scale because it is easier to distribute evenly in a low-dose blend; the sulfate's smaller mass needs a more careful premix and a validated mixing time. The arithmetic reverses for a high-dose product. A 500 mg capsule of gluconate carries about 60 mg of manganese, and the same fill of sulfate carries about 160 mg. A tablet or capsule that has to deliver a large manganese figure is therefore easier to build with the sulfate, while a low-dose product is easier to build with the gluconate. Neither salt fills a 2 mg capsule on its own; the carrier, the flow and the blend uniformity decide the formula. Bulk density is lot-specific for both salts; the catalog fixes 40 mesh, but density still varies with the crystallisation and the mill. Ask for the measured density with the method. ## What the label has to say The label names the salt, not only the element. “Manganese gluconate” and “manganese sulfate” are different ingredients with different CAS numbers, and a Supplement Facts or ingredient list that says only “manganese” has left the source open. The elemental manganese figure is declared separately, and it comes from the lot certificate and the conversion, not from the salt name. The market file follows the name. In the EU, the food-supplement framework lists mineral substances and the forms that may be used, and the buyer's regulatory team confirms that the named form and the current text cover the product. In the United States, the dietary ingredient is declared by its name, and the route is documented by the buyer. A switch from one salt to the other is a label change and a change-control event, not a purchasing decision. A 100 mg portion of sulfate monohydrate carries about 32.5 mg of manganese; the same portion of gluconate carries about 12.3 mg. The two portions are not interchangeable, and the label should make clear which salt the figure refers to. ## When to choose which Choose the gluconate for a neutral solution, a low water figure and a low-dose blend where the larger salt mass helps distribution. Choose the sulfate monohydrate for a concentrated source, a high-dose product where the fill weight matters, or a process that can accept the acidic solution and the structural water. Choose neither when the label calls for a chelate; that is the manganese bisglycinate conversation. Both salts are catalog items with the same 1 kg pouch and 25 kg drum, so the pack does not decide the choice. The manganese figure, the solution pH, the water result and the label name do. The manganese gluconate product page carries the gluconate specification; the manganese sulfate page carries the monohydrate specification; the grade page places both in the wider range; the COA page shows how the manganese and assay figures are reported; the compliance page covers the market file; the methods index describes the titration and the water test. ### 03 Manganese gluconate stability: the powder, the solution and the pack URL: https://nutrition.rainwoodbio.com/products/minerals/manganese-gluconate/stability/ Reviewed: 2026-11-19 Manganese gluconate keeps well in the sealed pack, and the failure modes are narrow: water in the powder and oxidation in solution. The catalog sets water at no more than 1.0% by Karl Fischer, and a powder above that limit cakes, loses as-is assay and drifts at the fill station. A solution is a different material to validate, because manganese(II) reacts with dissolved oxygen once the pH, the light and the heat allow it. In one lineThe powder keeps when the seal keeps: water is the first thing to move, and a manganese gluconate solution is the format that needs its own stability data. ## The powder: water first, colour second The 1.0% limit applies at release; it is not a licence to store the powder open. A pouch that is opened and closed admits humid air, the as-is assay falls as water dilutes the manganese, and the powder begins to cake. A caked material no longer flows evenly into a capsule, a die or a sachet. Close the pouch, close the drum liner, and write down the date of the first opening. Colour is the second signal. White to pinkish is the normal range, and the pink comes from the manganese. Grey or brown, or dark specks, points to a higher manganese oxide or to iron, which is not a moisture finding; check the batch record and the retained sample before rejecting on colour alone. Heat accelerates both moisture movement and oxidation. A sealed pack can usually sit in an ambient warehouse, but not in a hot loading bay or a vehicle. If a pack has been in the cold, let it reach room temperature before cutting the seal, or condensation will form on the powder. ## The solution: where oxidation happens Manganese gluconate dissolves freely and leaves a neutral solution. In that solution manganese(II) meets dissolved oxygen, and the oxidation to manganese(III), and further to manganese dioxide, is the reaction to watch. The dioxide is the brown precipitate that marks a failed hold. The reaction runs slowly near neutral pH and faster as the pH rises, so an alkaline matrix is the least forgiving. Pasteurisation and hot fill add a heat load that the powder never sees, and a clear bottle adds light. Where a liquid is unavoidable, light protection, pH control and low dissolved oxygen are the levers, and the hold time needs validation before the fill. Powder data does not describe a beverage; the recipe, the heat step and the container each alter the rate. ## What drives the change Factors that move manganese gluconate during storage | Factor | What it does | Control | Water | Raises the water result, lowers the as-is assay and cakes the powder | Sealed pouch; closed liner; dry store | Oxygen | Oxidises manganese(II) in solution; brown precipitate | Low dissolved oxygen; sealed pack | pH | Alkaline pH speeds oxidation; acidic pH slows it | Validate the matrix pH for a liquid | Heat | Accelerates oxidation and moisture movement | Controlled store; cool process | Light | Exposure accelerates colour and solution change | Opaque or foil pack; dark store | Trace metals | Iron and copper can catalyse oxidation | Avoid metal contact; check the equipment | Microbiology | Free water and gluconate support growth if the seal fails | Keep the powder dry; test at release and on storage The factors reinforce one another. A warm, bright, humid room is worse than three separate stresses, and a neutral solution in clear glass brings all of them together. The question that matters is not whether the ingredient is stable in general, but how it behaves in a named pack, at a stated condition, over a stated period. ## A stability protocol for the ingredient The protocol should name the pack, the condition, the test points and the panel. Run long-term samples at 25 °C/60% relative humidity, an intermediate set at 30 °C/65% relative humidity, and an accelerated set at 40 °C/75% relative humidity. Add a light-exposure arm, since a dark chamber cannot see a photochemical failure, and a solution arm for the format the powder test cannot describe. At each point measure manganese, the salt assay and water together, then add appearance, identification, pH where the specification includes it, and microbiology. Report the individual values rather than a pass statement, and identify the pack and the lot family behind them. Buy data for the pack you will use. A drum and a pouch differ in surface-to-volume ratio, headspace and how often they are opened, so a summary written for one does not describe the other. ## The dosage form changes the question A capsule shell and a tablet matrix hold little free water, but the excipients and the shell wall can still pass moisture inward to a hygroscopic salt. Measure water at release and again after storage, and examine the fill as well as the powder. In a stick pack the seal is the product: a pinhole fails the pack, so inspect the strip as well as the powder. A beverage combines water, oxygen, pH and heat. The ingredient's bulk behaviour is the starting point, not the answer. Any overage is a label and stability decision for the formulator, and it does not repair a pack that lets oxygen in. ## How the retest period is set No single shelf-life figure is published for manganese gluconate, since the pack and the way it is stored decide it. The retest period assigned to a product belongs on its specification and rests on the stability file for that pack. Without the pack, the condition and the panel, a shelf-life number is an assertion rather than a result. At the end of the retest period, pull the retained sample and re-assay before extending. Do not extend on assumption, and do not move a bulk number into a repacked jar or an opened pouch. The product hub lists the standard packs; the COA page covers release testing; the MOQ page covers the packs and the lead time; the methods index covers the assay and water tests; the quality page describes the release workflow. ### 04 Manganese gluconate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/manganese-gluconate/moq/ Reviewed: 2026-11-19 One kilogram is the minimum order for manganese gluconate, and it ships as a 1 kg foil pouch; production volumes usually take the 25 kg fiber drum. Standard packs leave within 1–7 days of order confirmation. To turn an enquiry into a firm quotation, the supplier needs the manganese and assay specification, the water and mesh figures, the pack and quantity, the destination and trade term, the documents, and the market and use. In one lineOne kilogram is the smallest unit that can be sampled, tested and traced as a lot, and the 25 kg drum is the same material with a longer opening history. ## Why the minimum is 1 kg A kilo covers a bench trial, a retain and a second-laboratory check, and it can travel as a parcel. That is enough to qualify a source before a production plan exists. The pack carries a lot code, so the trial material, the retain and the paperwork all point to the same batch. A smaller quantity means a repack from a larger lot: extra handling, a new label and a weaker chain back to the original pack. The 25 kg drum cuts handling per kilo but ties up inventory and stays open longer. The minimum follows the pack, not a sales target. ## Packs and formats Standard manganese gluconate packs | Pack | Net fill | Typical job | Opening behaviour | Foil pouch | 1 kg | Bench trial, retain, small batch | One opening; reclose immediately | Fiber drum | 25 kg | Production runs | Repeated openings; liner is the barrier | Granulated grade | On request | Tablet press, dust control | New specification, not a pack size The catalog form passes 40 mesh at 95% or better. Granulation changes the sieve line, may raise density and may introduce an aid that has to be declared, so raise it before the offer rather than after. The change can also move the lead time. The drum depends on its liner for the moisture barrier. Close the liner after each use, stand the drum on a pallet in a damp store, and note the opening date. Drum, liner and certificate should carry one code. ## Lead time and dispatch The quoted 1–7 days covers picking, paperwork and hand-over to the carrier. Transit, customs and the customer's own release sit outside it. A custom granulation or a non-standard pack adds time, and the offer should say so separately. Ask when it will leave, not only how long the lead time is. A drum travels on a pallet and a pouch as a parcel; the Incoterm assigns the freight booking and the entry clearance. Send the documents with the lot rather than after it. ## What a quotation needs Six details make two offers comparable: - The salt and its CAS. Manganese gluconate, 6485-39-8, spelled out rather than “manganese”. - The manganese range and assay. With the factor or basis behind the two figures. - Water and mesh. The Karl Fischer limit and the particle-size line. - Pack. 1 kg pouch, 25 kg drum or a granulated grade. - Destination and Incoterm. Country, port or address, and trade term. - Documents, use and market. COA, specification, SDS, any market statement, and what the material is for. An offer that omits the market and the use cannot be checked against the route. Terms and figures belong in the offer itself. ## The sample is a lot, not a demonstration Qualify from the kilo, not from a spoon: run identity, manganese, assay, water and microbiology, and retain a portion of the same pack. The lot code on the sample, the certificate and the offer should match. If the sample cannot be tied to a lot, it demonstrates the powder but does not qualify it. A smaller bench quantity is possible by arrangement, but it is a repack with its own traceability and should be documented as one. The bench sample and the production drum are not necessarily one lot. ## Terms to settle before the first order The offer covers the commercial side: Incoterm, pack, lead time and documents. The quality side needs its own agreement: which specification revision applies, a COA per lot, a retained sample, the water limit, the retest period and how changes are handled. Settle those points before the first production order; a dispute is the worst time to invent them. Returns follow the offer and the quality agreement. If a lot misses the agreed specification, compare the retained samples and arrange a joint re-test rather than arguing over a photograph. Agree in advance which laboratory is acceptable to both sides and who commissions the referee test. The catalog ranges are on the product hub; release tests are listed on the COA page; the market file is on the compliance page; the glossary has a short entry on MOQ; shipping and documents are covered on the logistics page; release practice is on the quality page. ### 05 The regulatory file for manganese gluconate URL: https://nutrition.rainwoodbio.com/products/minerals/manganese-gluconate/compliance/ Reviewed: 2026-11-19 Manganese gluconate, CAS 6485-39-8, is an ingredient rather than a finished product, so its regulatory position is a question of route and destination: food supplement, fortified food or another use. The buyer's regulatory team settles that question for each market. What follows sets out the framework, the limits and the paperwork that belong in the file. In one lineThe specification describes the material; the destination route, the manganese limit and the label are separate questions that the buyer's regulatory team confirms. ## What the file contains The file has to settle three things in order: what the powder is, which route it enters the market under, and what the label may say. The specification and the lot certificate settle the first. The route is a legal question for the destination, and the label follows from both. The route cannot be assumed. A nutrient source in a supplement, an ingredient in a fortified food and a material for another use are three different files. The salt name, the use level and the country decide which one applies; the specification does not. Great Britain keeps its own register and labelling rules while Northern Ireland follows the EU framework, so the two are checked separately. Paperwork completes the file: allergen and GMO statements, origin, residual solvents, and any customer declaration. If a statement is missing for the lot, say so before the order. A list with version numbers beats a folder of undated PDFs. ## European Union In the EU the file rests on general food law, Regulation (EC) No 178/2002, for safety and traceability, plus the route-specific text. For food supplements, Directive 2002/46/EC lists the mineral substances and forms that may be used. The annex is amended from time to time, so check the current version and confirm that the form on the certificate is the one listed. The buyer's regulatory team decides whether the route covers the finished product. Labelling sits under Regulation (EU) No 1169/2011. Annex XIII gives manganese a reference intake of 2 mg per day for the nutrition declaration; that is a labelling reference, not a ceiling. Claims sit under Regulation (EC) No 1924/2006 and the regulations that authorise individual wordings, and the amount per portion has to meet the condition attached to the entry. Contaminants sit under Regulation (EU) 2023/915, which replaced Regulation (EC) No 1881/2006. It sets maximum levels for lead, cadmium and mercury in food supplements. The file should show the lot result against the level that applies; the text can change, so check the consolidated version as of this review. ## United States In the United States the starting point is the dietary-supplement route. DSHEA governs it, 21 CFR 111 supplies the manufacturing practice, and the label carries a Supplement Facts panel. The manganese Daily Value used there is 2.3 mg for adults and children four years and older. A conventional food use follows the food-additive route instead, with a different file. The ingredient's status is documented rather than assumed. A dietary ingredient with a pre-1994 marketing history and a new dietary ingredient supported by a notification under 21 CFR 190.6 are different files, and the buyer's regulatory team confirms which one applies. The supplier provides the identity, specification and safety documents that the file relies on. Claims are reviewed on their own. A structure or function statement needs the required disclaimer and must stop short of a disease claim; the label and the claim are separate from the certificate. California's Proposition 65 adds a lead-warning question for products sold there, and the lot result is where that review starts. ## Contaminants and the manganese figure The contaminant panel is calculated on the finished product, not only on the drum. The table gives the usual starting references for a supplement file; the current text and the daily dose decide the final number. Contaminant limits to confirm for the finished product | Parameter | Usual supplement reference | Evidence the file needs | Lead (Pb) | 3.0 mg/kg in the supplement | Lot figure, method and the dose conversion | Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot figure, plus any category exception | Mercury (Hg) | 0.10 mg/kg in the supplement | Lot figure and method | Arsenic (As) | Agreed with the customer or market | The limit and method written on the certificate Manganese is the nutrient, not a contaminant, so the question is dose rather than residue. The EU reference intake is 2 mg per day and the US Daily Value is 2.3 mg; a member state may set its own maximum for supplements, and the buyer confirms whether one applies. A high-dose product needs that check before the label is written. ## Label and claims In the EU only the authorised nutrition and health claims are available, each with conditions on wording, amount and presentation. The EU claim register includes entries for manganese, but the exact text and the amount per portion still have to be matched to the current regulation. In the United States a structure or function statement needs the disclaimer and must not become a disease claim. Approval of a claim is separate from the certificate, and a claim cannot rewrite the specification. The label names the salt as well as the element. “Manganese gluconate” is the ingredient and the manganese figure is the declaration. A label that says only “manganese” leaves the source open, and a switch to the sulfate or the bisglycinate is a new label and a new file. ## Documents in the file - A lot certificate with the manganese and assay figures, water and the contaminant results. - The specification revision and the technical data sheet that the offer refers to. - Safety data sheet, allergen statement, GMO statement and origin record. - Residual-solvent statement, non-irradiation statement and any processing-aid declaration. - Packing list, certificate of origin and the statements the importer asks for. - Change-control record covering the source, the process and the pack. ## Checklist before the first order - The specification revision, CAS number and exact salt are written down. - The destination route has been confirmed by the buyer's regulatory team. - The contaminant figures have been carried through to the finished-product dose. - The manganese level is checked against the destination's limit or guidance. - The label names the salt, and the claim wording has been reviewed. - COA, TDS, SDS and the statements on file all refer to the same version. The catalog ranges are on the product hub; the lot certificate is explained on the COA page; the salt choice is set out on the level-four comparison; framework references are in the EU regulatory note and the US regulatory note; the panel is defined in the heavy-metals entry; release practice is on the quality page. ### 06 How a manganese gluconate lot is identified URL: https://nutrition.rainwoodbio.com/products/minerals/manganese-gluconate/identity/ Reviewed: 2026-11-19 A manganese gluconate lot passes identity when four independent checks line up: the paperwork names the salt and its CAS number, infrared matches a gluconate standard, the titration reports 11.5–12.5% manganese, and the salt calculated from that figure falls in 98.0–102.0%. Manganese alone is not enough, because the sulfate and the oxide also contain it. The anion test and the ratio separate them, and colour is the weakest evidence of all. In one lineIdentity is the manganese figure, the anion and the mass balance agreeing at once: titration says how much manganese, infrared says which salt, and the ratio says whether the two belong together. ## The identity layers A correct name on a certificate is a claim, not evidence. The checks below answer different questions and need separate results; a supplier who answers only the first has described paperwork. Layers of manganese gluconate identity | Check | What it settles | Method | What it cannot tell you | Paperwork | The salt and CAS number | Name, CAS number, formula | Whether the powder matches | Element | The manganese content | Complexometric titration | Which anion carries the metal | Anion | Gluconate or another acid | Infrared against a reference; gluconate identification | The amount of salt | Ratio | Whether the two figures agree | Manganese against the calculated assay | Which adulterant is present | Phase | A crystalline second salt | Sulfate limit test; X-ray diffraction | The manganese figure ## The manganese-to-salt ratio The salt holds one manganese atom per gluconate, and the formula fixes the proportion. The theoretical manganese content is 12.34%, and 8.10 is the factor that converts the element into salt. A lot at 12.2% manganese therefore works out at about 98.8% salt, inside the assay range and consistent with the same titration. A certificate showing 11.8% manganese beside a 101.0% assay is not consistent, because the element and the salt cannot both be right. Two common problems show up in that comparison. A blend with manganese sulfate lifts the manganese above 12.5% and, because the factor assumes gluconate, lifts the calculated salt figure with it, often past 102.0%; the sulfate test and the infrared spectrum are what name the extra anion. A dilution with glucose or maltodextrin pulls both figures down and usually moves the water result. Each line can look plausible on its own; the ratio is what exposes the pair. Water is the third input. The catalog sets water at no more than 1.0% by Karl Fischer, so as-is and dried results sit close together, but the certificate should still say which basis the assay uses. A dried-basis result and an as-is result are not the same powder, even when the printed percentage is identical. ## X-ray diffraction: the solid-state check Diffraction reads the solid, not the solution. If the lot is crystalline, its pattern can be compared with a reference, and a manganese sulfate monohydrate phase shows reflections of its own; manganese oxide would show a different set again. That makes diffraction a useful second opinion when a blend is suspected, but it is not a purity assay and it says nothing about how much manganese is present. Ask for the reference pattern and the detection limit behind a “match” statement; without them, the word proves only that a diffractometer was switched on. Reserve the test for a disputed lot or a new source rather than every release. On a disputed lot, diffraction, infrared and the manganese-to-salt ratio answer three different questions. Together they are stronger than three repetitions of the same assay. ## What adulteration looks like Common manganese gluconate substitutions and the signals | Substitution | Effect | Signal | Check | Manganese sulfate | More manganese; sulfate added | Manganese above 12.5%; assay low | Sulfate test, XRD, ratio | Manganese oxide | Dark colour; high manganese; poor solubility | Dark specks; insoluble residue | XRD, visual, solubility | Glucose or maltodextrin | Less manganese and less salt | Both figures low; density or taste shift | Infrared, ratio, water | Water | Dilutes the as-is assay | Water high; dried assay normal | Karl Fischer | Iron | Colour change and a contaminant | Grey or brown cast | ICP-MS and the batch record Colour is the weakest signal. White to pinkish covers a wide range, and a blend can be milled to match it. The sulfate test, the diffraction pattern and the ratio are the stronger evidence. If the certificate reports appearance and manganese but says nothing about the anion, the most likely substitution remains untested. ## How to write the identity into the specification - “Manganese gluconate, CAS 6485-39-8, C12H22MnO14.” - “Complexometric assay 98.0–102.0%, with the basis named on the certificate.” - “Manganese 11.5–12.5% on the same lot; water ≤1.0% by Karl Fischer.” - “Infrared identity against a named gluconate reference, confirmed by titration.” - “Sulfate limit test, with the limit written into the specification.” - “At least 95% through 40 mesh; contaminants and microbiology as listed.” ## Five questions for the supplier - Which salt is this lot, and which CAS number appears on the certificate? - Can you send the infrared spectrum and the reference, not only the word “conforms”? - What manganese result was measured, what factor converts it to the assay, and is that assay on the as-is or dried basis? - What water result did Karl Fischer return for this lot? - If a sulfate blend is suspected, will you run a sulfate limit test and a diffraction scan on the retained sample? Five direct answers amount to an identity file; a single manganese percentage does not. The product hub carries the catalog ranges; the COA page explains how each figure is reported; the grade page compares the manganese sources; the level-four comparison takes the sulfate question further; the methods index explains the titration, infrared and diffraction tests; release practice is on the quality page. ### 01 What the COA for manganese sulfate monohydrate actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/manganese-sulfate/coa/ Reviewed: 2026-11-19 A manganese sulfate monohydrate certificate is a release record for one lot: appearance, identity by IR and titration, assay, manganese, water, heavy metals, microbiology and particle size. The assay and the manganese figure only make sense together, because the water of crystallisation sits between them. The values in this table are the catalog gates; the lot certificate carries the measured results. In one lineThe assay and the manganese figure carry this certificate, with water beside them to show which hydrate was weighed. ## How to read the certificate A certificate becomes auditable when every line names the test, the method and the gate the lot had to pass. “Conforms” without a method is a conclusion, not evidence. Three lines decide what the powder is: identity says it is manganese sulfate, assay says how much monohydrate is present, and water says which hydrate was weighed. If one of the three is missing, the other two cannot carry the identification. Release tests for manganese sulfate monohydrate | Parameter | Method | Release limit | Appearance | Visual | Pale pink, free-flowing powder | Identification | IR and complexometric titration | Conforms to the reference | Assay | Complexometric titration | ≥98.0% | Manganese | Complexometric titration | 31.5–33.0% | Water | Karl Fischer | 10.0–12.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh Complexometric titration is the release method for both the assay and the manganese figure. It measures the metal directly, so the two results rise and fall together. IR adds the structural check: the sulfate bands and the water band show a hydrated sulfate rather than a different manganese salt. ## Why assay, manganese and water must agree Monohydrate means one water molecule per manganese ion. The pure salt is 32.5% manganese and 10.66% water; the specification brackets those values at 31.5–33.0% and 10.0–12.0%. At 98.0% assay the powder carries about 31.9% manganese as weighed. Recalculate that figure without the water and it becomes about 35.7%, close to the 36.4% of the anhydrous salt. The three numbers are a single mass balance, not three independent opinions. A certificate that reports manganese near 36% on a monohydrate lot may be using a water-free basis; that is not proof of the anhydrous salt. The basis must be printed in the row. The assay needs its basis too, because a dried-basis figure and an as-received figure describe different quantities of powder. Water by Karl Fischer supplies the missing mass: it covers both the crystal water and any free moisture. With assay, manganese and water on one page, a reader can check the form; with assay alone, the reader cannot. ## Gate and result are different columns A specification value is a boundary. A batch value is a measurement. They should never share a cell. If the result column simply repeats the range, the certificate has not told the buyer what was found in the lot. What the batch column should report | Parameter | Release limit | Batch column | Assay | ≥98.0% | Measured %, with method and basis | Manganese | 31.5–33.0% | Measured %, with its own basis | Water | 10.0–12.0% | Measured Karl Fischer % | Heavy metals | Per element | Measured mg/kg per element | Microbiology | Counts and absence | The lot count and absence statement Read manganese against water. A lot at 12.0% water holds less monohydrate per gram than a lot at 10.0%, so its manganese figure is lower and its fill weight higher. That is the specification working, not a failed batch. Heavy metals need one figure per element; a single total hides which metal is present. ## What changes from lot to lot Crystallisation and drying set the water result, and water is the most mobile line on the certificate. Colour moves within the pale pink range without any identity problem, but a brown cast is a different signal: it suggests oxidation, and the lot should be examined rather than accepted on appearance. The assay has less room to move; a lot close to 98.0% has little margin for another handling step. Particle size follows the mill and the sieve, so the 40 mesh result can change with no chemical change at all. Look at the direction of travel across several lots, not one certificate at the edge. The lot code on the paper should also appear on the pouch, the drum and the retained sample. ## When an outside laboratory is worth it Use an outside laboratory for a new source, a first shipment to a regulated market, a disputed hydrate or a certificate that reports only conformity. A useful panel is titration for assay and manganese, Karl Fischer for water, IR for identity, ICP-MS for the metals, a plate count and a sieve check. If the hydrate is the question, add XRD or thermogravimetry: those tests see the crystal, while a second titration only repeats the metal result. The report should give a detection limit for each screen, because “not detected” has no meaning without one. Keep the chain of custody intact and send the referee the retained sample, the certificate and the specification when a result is challenged. ## Comparing two suppliers Ask for the same six lines from each supplier: hydrate and CAS; assay and its basis; manganese and its basis; water; metals and microbiology; particle size and pack. A pair of certificates that agree on assay but disagree on water or basis does not describe the same powder. Then check traceability: who made the lot, how it was dried and milled, and whether the sample came from the pack being offered. The catalog specification is on the manganese sulfate product page. The identity page sets out the tests that separate the hydrates, and the compliance page covers the market file. The methods notes describe the titration, and the quality page covers release. ### 02 Manganese sulfate monohydrate or anhydrous: choosing the form URL: https://nutrition.rainwoodbio.com/products/minerals/manganese-sulfate/grades/ Reviewed: 2026-11-19 Manganese sulfate is supplied as the monohydrate, the form specified here, and as the anhydrous salt. The monohydrate is the standard supplement grade: it is stable at ambient conditions, free-flowing and 32.5% manganese by mass. The anhydrous salt is 36.4% manganese and takes up moisture readily, so it is chosen when the extra concentration matters and the plant can control water. A granulated monohydrate is a physical grade of the same chemistry, not a different salt. In one lineThe hydrate is the specification: the monohydrate and the anhydrous salt differ by about 12% in mass per unit of manganese, and the label has to name the form that was weighed. ## Why manganese sulfate comes in more than one form Manganese sulfate crystallises with water. The monohydrate carries one water molecule per manganese ion, and that water is part of the crystal, not a residue on the surface. The anhydrous salt has no water in the crystal. Both are manganese(II) sulfate, both dissolve in water and both give the pale pink colour of the manganese(II) ion, but they are different specification items with different CAS numbers, molecular weights and manganese figures. The monohydrate is the form that is stable at ordinary temperature and humidity. The anhydrous salt is hygroscopic: left open, it takes water back and moves toward the hydrate, which changes the mass and the manganese figure per gram. That is why the hydrate is the practical default for a supplement plant and the anhydrous salt is a specialist purchase. The third option is not a different chemistry at all: a granulated monohydrate is the same salt with a coarser particle and better flow, specified by particle size and bulk density as well as by assay. ## The forms side by side Manganese sulfate monohydrate, anhydrous salt and granulated monohydrate | Property | Monohydrate | Anhydrous | Granulated monohydrate | Formula | MnSO4·H2O | MnSO4 | MnSO4·H2O | CAS number | 10034-96-5 | 7785-87-7 | 10034-96-5 | Molecular weight | 169.01 | 151.00 | 169.01 | Manganese (theoretical) | 32.5% | 36.4% | 32.5% | Water (bound) | 10.66% | None | 10.66% | Appearance | Pale pink powder | Pale pink to off-white | Coarser pink granules | Handling | Stable; keep sealed and dry | Hygroscopic; keep sealed | Stable; free-flowing | Label name | Manganese sulfate monohydrate | Manganese sulfate, anhydrous | Manganese sulfate monohydrate | Typical use | Standard supplement grade | Concentrate where water is unwanted | Blends where dust matters The difference in manganese is 3.9 percentage points, which is about 12% more mass for the same manganese when you use the monohydrate. That is the whole commercial difference, and it is enough to move the fill weight, the capsule size and the blend. The granulated grade repeats the monohydrate chemistry; only the particle size and flow differ. ## Solubility, colour and handling Both forms dissolve freely in water, and both solutions are acidic. The monohydrate is a pale pink, free-flowing powder at 40 mesh; the colour comes from the manganese(II) ion and is not a purity measure. The anhydrous salt is paler, sometimes close to white, and its powder can be finer and more dusty. The monohydrate is not a coated or diluted material; it is the same salt with its water of crystallisation. Granulation changes the particle size and the flow, not the assay. A granulated monohydrate is useful where dust and segregation matter in a blend, but it is specified by particle size and bulk density as well as by assay. The solution is acidic, so check the material of construction before a long hold. The powder should stay in a sealed pack; the monohydrate is less hygroscopic than the anhydrous salt but it is not a desiccant, and free moisture can still push the water result above the 12.0% limit. ## Dose arithmetic and the fill The fill weight follows the manganese figure, not the salt name. If a label declares 10 mg of manganese, the pure monohydrate needed is 10 ÷ 0.325 = 30.8 mg; at a 98.0% assay, 31.4 mg. The anhydrous salt needs 10 ÷ 0.364 = 27.5 mg, or 28.1 mg at the same assay. The difference is 3.3 mg per serving, about 12%, and it compounds across a batch. At a 2 mg declaration the weights are 6.2 mg and 5.5 mg, small enough that blend uniformity becomes the harder problem: a direct blend of a few milligrams into a 500 mg capsule is difficult, so a diluted premix or a granulated carrier may be needed. The capsule shell and the excipients take the rest of the fill. Do not size the fill on the salt weight if the label declares elemental manganese; convert first, then add the excipient. The same arithmetic applies to a tablet or a stick pack, and the assay and water figures for the lot should be the ones used. A lot at the top of the water range carries less monohydrate per gram, so the fill moves again within the specification. ## What to write into the specification - “Manganese sulfate monohydrate, CAS 10034-96-5, MnSO4·H2O.” - “Assay ≥98.0% by complexometric titration; state the basis.” - “Manganese 31.5–33.0% by titration; state the basis.” - “Water 10.0–12.0% by Karl Fischer.” - “Identification by IR and titration.” - “Particle size ≥95% through 40 mesh; granulated on request.” - “Heavy metals and microbiology as listed on the catalog specification.” - “Destination market and hydrate confirmed before the order.” If the brief calls for the anhydrous salt, write “manganese sulfate, anhydrous, CAS 7785-87-7” and give it its own water and manganese limits. A specification written for the monohydrate does not transfer. ## When the other hydrate is the wrong purchase The anhydrous salt is the wrong choice when the label, the specification or the market file names the monohydrate, and when the plant cannot keep the powder sealed and dry. A hygroscopic material in an open hopper is a moving assay. The monohydrate is the wrong choice when the formula is genuinely moisture-sensitive and the water of crystallisation is a problem, or when the extra 12% of mass per unit manganese does not fit the dosage form. Those are formulation decisions, not default substitutions. Changing either way is a change-control event: a new specification, a fresh label check and a written approval. The catalog specification is on the manganese sulfate product page. The level-four comparison works through the manganese and fill arithmetic; the COA page shows where the water and manganese results sit; the identity page lists the tests that separate the hydrates. For a chelate or a low-concentration salt, see the manganese gluconate and manganese bisglycinate pages. ### 02.1 Manganese sulfate monohydrate vs anhydrous: the manganese figure and the fill URL: https://nutrition.rainwoodbio.com/products/minerals/manganese-sulfate/grades/manganese-sulfate-monohydrate-vs-anhydrous/ Reviewed: 2026-11-19 The monohydrate is 32.5% manganese by mass; the anhydrous salt is 36.4%. For the same declared manganese, the monohydrate needs about 12% more powder, and that difference lands in the fill weight, the capsule size and the blend. Both are manganese sulfate, but they are different specification items with different CAS numbers and different water figures. The manganese figure, read on the right basis, decides the fill. In one lineThe manganese figure decides the fill: the monohydrate carries 32.5% manganese and the anhydrous salt 36.4%, so the same label dose needs about 12% more monohydrate. ## Two forms, two identities Both materials are manganese(II) sulfate. The monohydrate, MnSO4·H2O, carries one water molecule per manganese ion and has CAS 10034-96-5; the anhydrous salt, MnSO4, has CAS 7785-87-7. The molecular weights are 169.01 and 151.00. The monohydrate is the stable form at ordinary temperature and humidity, and the anhydrous salt is hygroscopic: exposed to moist air it takes water back and moves toward the hydrate. That single behaviour explains most of the handling difference between them. The anhydrous salt therefore belongs in a sealed pack with a defined in-use period, not an open hopper. Monohydrate and anhydrous manganese sulfate | Property | Monohydrate | Anhydrous | Formula | MnSO4·H2O | MnSO4 | CAS number | 10034-96-5 | 7785-87-7 | Molecular weight | 169.01 | 151.00 | Manganese (theoretical) | 32.5% | 36.4% | Water | 10.66% bound | Essentially none | Handling | Stable; keep sealed | Hygroscopic; seal and use promptly | Label name | Manganese sulfate monohydrate | Manganese sulfate, anhydrous ## The manganese figure per gram The manganese figure is the mass of manganese per mass of powder. For the monohydrate it is 54.94 ÷ 169.01 = 32.5%; for the anhydrous salt it is 54.94 ÷ 151.00 = 36.4%. The catalog monohydrate range is 31.5–33.0%, which brackets the theoretical value and allows for assay and water. The anhydrous salt has no catalog range on this page; if it is bought, it needs its own specification. The basis is the trap. A monohydrate certificate can report manganese on the powder as received (about 32%) or on a water-free basis (about 36%). A figure near 36% therefore does not prove the anhydrous salt. Read the basis line and the water result before the form. This is the same distinction that makes certificates hard to compare between suppliers: two numbers that look different can describe the same lot. A monohydrate at 98.0% assay and 10.7% water is 31.9% manganese as-is and 35.7% on a water-free basis; the anhydrous salt at the same assay is 35.7% as-is. The two figures collide unless the water is on the page. ## The fill weight follows the manganese Start from the label declaration. If it is elemental manganese, divide by the manganese fraction of the form. A 10 mg declaration needs 10 ÷ 0.325 = 30.8 mg of pure monohydrate, or 31.4 mg at a 98.0% assay. The same declaration needs 27.5 mg of pure anhydrous salt, or 28.1 mg at 98.0%. The monohydrate is about 3.3 mg heavier per serving, 12% more. At 2 mg the difference is 0.7 mg; at 25 mg it is 8.2 mg. The factor applies to every declaration. In a capsule the excipient absorbs the difference; in a tablet the compression weight may not, and in a stick pack the powder weight is visible on the label. If the declaration is the salt rather than the element, the fill is the declared salt weight and the manganese is the derived figure. Both directions are valid, but the label, the specification and the weigh-up have to use the same one. A 1 kg pack of monohydrate carries about 320 g of manganese at 32%, which is roughly 31,800 capsules at 10 mg before excipients; the same mass of anhydrous salt carries about 356 g and roughly 35,600 capsules. The pack size, not the salt name, sets how far a kilogram goes. ## Water, handling and the drift between the forms The monohydrate is specified at 10.0–12.0% water by Karl Fischer; the theoretical figure is 10.66%. That window is narrow on purpose. Above 12.0% the powder carries free moisture, which dilutes the manganese per gram and can cake. Below 10.0% the crystal has lost some of its water and is partly on the way to the anhydrous salt, which raises the manganese per gram. Either move changes the fill weight even when the assay is unchanged. The anhydrous salt is the other extreme: it has no crystal water and takes it up readily. A drum that has been opened in a humid room can gain water in a short time, and the manganese figure falls as the mass rises. Keep both forms sealed, keep the drum liner closed, and record the opening date. A desiccant helps in a humid store but does not replace a seal. If the plant cannot guarantee dry handling, the monohydrate is the more forgiving purchase. ## What the label has to say The label has to name the form that was weighed. The EU list uses the spelling “manganese sulphate”; the label should still name the hydrate the material actually is. The nutrition declaration gives manganese in mg and as a percentage of the nutrient reference value, which is 2 mg/day for manganese in the EU. In the US, the Supplement Facts panel names the source in parentheses, for example “manganese (as manganese sulfate monohydrate)”, and the daily value for manganese is 2.3 mg. The declaration and the specification should use the same hydrate; a label that says monohydrate over an anhydrous lot is a mismatch even when the manganese figure is inside range. The buyer's regulatory team confirms the wording and the route for the destination. This page is not a label approval, and it does not assert that either form is permitted in a given market. ## When to choose which Choose the monohydrate for supplements, for blends and for any plant that cannot guarantee a dry, sealed handling line. It is the stable ambient form, it is the form with the catalog specification, and its water figure is a built-in check on the hydrate. Choose the anhydrous salt only when the extra manganese per gram is worth the handling, for example in a concentrated premix or a formula where the crystal water is unwanted, and only with its own specification, its own water limit and a label that names it. This is the form we supply: the monohydrate; the anhydrous salt is a separate purchase, not a substitution. For a different manganese salt, see the manganese gluconate and manganese bisglycinate pages. The grades page widens the comparison; the COA page shows how the results are reported; the identity page lists the tests that separate the hydrates; the product hub has the catalog specification. ### 03 Manganese sulfate monohydrate: water, oxidation and the pack URL: https://nutrition.rainwoodbio.com/products/minerals/manganese-sulfate/stability/ Reviewed: 2026-11-19 Manganese sulfate monohydrate keeps well in a sealed, dry pack at ambient temperature. Its weak points are water and oxidation: moisture outside the 10.0–12.0% water specification changes the manganese figure per gram, and a neutral or alkaline solution can turn brown as manganese(II) oxidises. The pack and the storage condition, not the certificate, determine the retest period. In one lineThe monohydrate is stable while its water stays between 10.0 and 12.0% and its solution stays acidic; the pack has to keep moisture out and the formula has to keep the pH down. ## The powder: water is the specification Water is both a release test and a storage indicator. Karl Fischer must land between 10.0% and 12.0%. Open the pouch and the powder can take up moisture; the water result climbs, the as-is manganese falls and the powder may cake. Store it warm and dry and the opposite can happen: the crystal loses water, moves toward the anhydrous salt and the manganese figure per gram rises. Either drift changes the fill weight. Keep the pouch closed and opaque. Let a cold pack reach room temperature before opening so condensation does not form on the powder. The 25 kg drum depends on its liner, so close the liner, keep the drum off a damp floor and record the opening date. A desiccant is useful in a humid room but cannot replace a seal. Once a pouch has been opened and folded, count it as an in-use pack with a defined life. ## The solution: acidity is the protection The salt dissolves freely and the solution is acidic. That acidity is protective: manganese(II) remains soluble and stable in acid, while neutral or alkaline conditions allow oxidation to a brown oxide. Heat, air, light and rising pH all speed that change. Do not hold the solution in a clear bottle on a bench. For a liquid product, keep the pH low, limit dissolved oxygen, exclude light and validate the hold time before filling. Powder data does not predict beverage behaviour; the matrix, the process and the pack all change the rate. An aqueous solution also supports microbial growth, so preservation or a validated short hold is part of the design. Check that the tank and liner materials suit an acidic sulfate solution before a long contact time. ## What drives change during storage Storage factors for manganese sulfate monohydrate | Factor | Effect | Control | Moisture gain | Raises Karl Fischer water; lowers the as-is manganese figure; caking | Sealed pouch; dry store; desiccant where needed | Moisture loss | Pushes the hydrate toward the anhydrous salt; raises manganese per gram | Controlled store; avoid heat and open air | Oxygen and pH | Oxidation to a brown oxide at neutral or alkaline pH | Keep the solution acidic; low oxygen; validate hold | Heat | Speeds water loss, caking and solution oxidation | Controlled store; cool process | Light | Colour change in solution | Opaque pack; dark store | Metal contact | Corrosion and colour in the acidic solution | Compatible tanks and liners | Microbiology | Growth in an aqueous solution | Validated hold; preservative if needed The factors interact. A warm, humid store combines water uptake and caking; a neutral solution in clear glass combines pH, light and oxygen. The practical question is always the same: which pack, which condition, which test panel and how long? ## A stability protocol for the ingredient Define the pack, the condition, the time points and the tests before starting. A common design is 25 °C/60% relative humidity for long-term storage, 30 °C/65% for intermediate storage and 40 °C/75% for accelerated storage. Add a light-exposure arm, and for a liquid add a pH arm. Test assay, manganese, water, appearance, identity and microbiology at every point. Report the individual results, not only a pass or fail. Name the pack and the lot family. A study on a pouch does not cover a drum, because the headspace and the opening history differ. Ask for data on the pack you will actually buy. ## The finished formula changes the question A capsule or tablet has little free water, yet the shell and the excipients can still pass moisture through. Check water and appearance at release and after storage, and watch for caking in the fill. A powder blend brings segregation: the 40 mesh monohydrate may differ in bulk density from the other ingredients, so match the particle size or granulate. A stick pack is only as good as its seal; inspect the strip as well as the powder. A beverage adds pH, oxygen, heat and light. Bulk data starts the work; it does not finish it. Whether to use an overage is a label and stability decision for the formulator, and it cannot compensate for a pack that admits moisture. A brown liquid is a batch failure signal, not a minor colour note. ## How the shelf life is set There is no single shelf life for the material. The retest period is assigned to a pack and a storage condition, with the stability file for that pack behind it. A number quoted without those three details is not a shelf life. When the retest period ends, re-test the retained sample before adding time. Never extend by default, and do not transfer a bulk result to a repack. Standard packs are listed on the product hub; release tests are on the COA page; pack and lead time are on the MOQ page; methods notes describe titration and water; the quality page describes the release workflow. ### 04 Manganese sulfate monohydrate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/manganese-sulfate/moq/ Reviewed: 2026-11-19 The minimum order for manganese sulfate monohydrate is 1 kg, packed in a foil pouch; production volume ships in a 25 kg fiber drum. Standard packs leave in 1–7 days. To turn an enquiry into a firm quotation, we need the hydrate and CAS number, the assay and manganese basis, the quantity and pack, the destination and Incoterm, the document list, and the market the material is intended for. In one lineOne kilogram is the smallest pack we trace as a lot, and at 32.5% manganese it already carries enough active for tens of thousands of capsules. ## Why the minimum is 1 kg One kilogram is a lot, not a scoop. It can be sampled, tested, retained and traced, and it travels as a parcel. The sulfate is concentrated, so a kilogram goes further than the number suggests: at 32.5% manganese it holds about 320 g of the element, which is roughly 31,800 capsules at a 10 mg declaration before excipients. That is enough for a pilot batch or a small production run. The minimum exists to protect traceability, not to push volume. Smaller quantities are usually repacked from a larger lot. Repacking adds a handling step and a new container identity, and it weakens the link between the certificate and the pack. At the other end, the 25 kg drum lowers handling per kilogram but ties up inventory. A plant using a few kilograms a month should compare the drum with its usage rate, because the pack may outlast the retest period. ## Packs and formats Packs for manganese sulfate monohydrate | Pack | Size | Where it fits | What to know | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; close tightly after use | Fiber drum | 25 kg | Production | Liner inside; lot code on drum and liner | Granulated monohydrate | On request | Flow and dust control | Particle profile and bulk density change Granulation is a specification change, not a packing preference. It changes particle size and bulk density, and it may change the lead time. Dilution is a different product: the manganese per gram falls, a carrier is added and the label changes. The catalog powder passes 40 mesh at 95% or better. ## Lead time and dispatch Standard packs are quoted at 1–7 days after order confirmation. That covers picking, documents and dispatch; transit, customs and the customer's own release are outside it. A granulated grade or a non-standard pack takes longer, and the quotation should say so separately. Ask for a dispatch date as well as a lead time. The Incoterm decides who books freight and who clears entry, and a drum and a pouch do not travel the same way. Documents should accompany the lot. ## What a quotation needs Six details make quotations comparable: - Hydrate and CAS. Manganese sulfate monohydrate, CAS 10034-96-5. - Specification. Water, particle size, metals, microbiology, and the assay and manganese figures with their basis. - Quantity and pack. A 1 kg pouch, a 25 kg drum, or granulation on request. - Destination and Incoterm. Country, port or address, and trade term. - Documents. COA, specification, SDS and any destination-specific statement. - Use and market. Supplement, food or other use, and the country of sale. A quotation that omits the hydrate or the market is not comparable with one that includes them. Commercial terms are not published here; they are set out in the quotation. ## The sample is a traced lot The 1 kg pouch is the qualification pack. Test identity, assay, manganese, water and microbiology, and retain a sample from that same pack. The lot code should connect the sample, the COA and the quotation. A sample without a lot code is a demonstration. Need less than a kilogram for a bench trial? Raise it first. Splitting a bulk lot produces a repack with its own traceability; it is not the catalog pack. Do not assume the bench sample and the production drum share a lot. ## Terms to settle before ordering The quotation covers the commercial basis, Incoterm, pack, lead time and documents. The quality side needs its own terms: specification revision, COA per lot, retained sample, retest period and change control. A quality agreement before the first production order is easier than a dispute afterwards. Returns and replacements are handled under the quotation and the quality agreement. If a lot fails the agreed specification, work from the retained sample and a joint re-test rather than a photograph. Agree in advance who pays for the referee laboratory and which laboratory both sides accept. The manganese sulfate product page has the catalog specification; release tests are listed on the COA page; market files are on the compliance page; methods notes define the titration; the quality page has the release file. For another manganese salt, see the manganese gluconate and manganese bisglycinate pages. ### 05 The regulatory file for manganese sulfate monohydrate URL: https://nutrition.rainwoodbio.com/products/minerals/manganese-sulfate/compliance/ Reviewed: 2026-11-19 The compliance file for manganese sulfate monohydrate has to connect three things: the material named in the specification, the lot released by the certificate, and the route the finished product takes in its destination market. The buyer's regulatory team decides that route. This page sets out the documents and checks the file should contain, and it names the frameworks to read rather than replacing them. In one lineA certificate can describe the salt, but only the destination file can say whether the salt, the level and the label are acceptable there. ## What has to be in the file Four questions shape the file. What specification version, hydrate and grade are on the order? What does the certificate say about the lot being released? Which limits and label rules govern the finished product? And what is the change route for source, process and pack? The certificate handles the lot, the technical data sheet handles the specification, and the safety data sheet handles handling. The route question needs its own answer, and the food-additive route is a separate question from the supplement route; the file should say which one the finished product uses. For this salt, grade comes before route. Manganese sulfate is also traded as a feed additive and as a fertiliser. Those grades are not the supplement material, even when the assay looks familiar. The file should show a food-grade specification and the manufacturing controls behind it. The hydrate needs to be named as well: the monohydrate and the anhydrous salt give different manganese figures, and the destination file should say which one it covers. ## European Union Directive 2002/46/EC is the food-supplement framework to start from. Its Annex II lists mineral substances and forms; “manganese sulphate” is the spelling to locate, and the buyer's team confirms the current entry, the hydrate and any condition attached. General food law, labelling and contaminant rules sit alongside that entry. The nutrition declaration expresses manganese in mg and as a share of the nutrient reference value; the EU reference value is 2 mg per day. Mineral maxima for supplements are not fully harmonised. Several member states set their own, so the destination file should name the limit that applies. A supplier statement that the lot is food grade does not replace the entry check. Check the current text before the order; this summary is not a substitute, and the entry can change. ## United States The US file begins with the dietary-supplement route. Manganese sulfate is affirmed as GRAS for nutrient-supplement use at 21 CFR 184.1461; the buyer's team confirms that the intended use and level fit the affirmation and that the finished product meets the supplement cGMP at 21 CFR Part 111. The Supplement Facts panel names the source, and the daily value for manganese is 2.3 mg for adults and children four years and older. The label and any claim are reviewed apart from the certificate. A GRAS affirmation for a food use does not authorise a structure/function statement, and a statement does not alter the specification. This page does not assert that either hydrate is permitted in a particular market. ## Contaminants in the finished product A contaminant result on the drum is a concentration, not an intake. The file has to convert the lot figure to the daily dose of the finished product and compare it with the limit that applies there. The table is a starting point for a supplement file; the destination text and the dose settle the final number. Contaminant references for a supplement file | Metal | Reference level in the supplement | Evidence the file needs | Lead (Pb) | 3.0 mg/kg | Measured result, method and dose calculation | Cadmium (Cd) | 1.0 mg/kg | Measured result; note any category exception | Mercury (Hg) | 0.10 mg/kg | Measured result and method | Arsenic (As) | Agreed with the customer or set by the market | The chosen limit and the method reported The manganese figure enters the same calculation. A label declaring 10 mg of manganese uses about 31 mg of monohydrate at 98.0% assay, so the salt weight and the element weight are not interchangeable. The intake calculation should use the element figure and the lot's actual assay. ## Claims and label wording No disease-related claim is made for this ingredient. In the EU, manganese has a small set of Article 13(1) claims tied to normal function; they are conditional, and the product must qualify as a source of manganese. The brand's reviewer confirms the exact wording, the condition of use and the market. In the US, a structure/function statement must be truthful, not misleading, and carry the required disclaimer; the reviewer confirms it too. Approval of a claim is separate from approval of a specification. A certificate cannot authorise label text, and label text cannot change what was tested. The label should also name the hydrate, because the manganese figure per gram depends on it. ## Documents to assemble The file should hold the current specification, with the version, hydrate and grade identified; the lot COA; the TDS; the SDS; a mineral-origin statement with allergen and GMO declarations; the contaminant results and the finished-product calculation; the label artwork and claim review; and the change-control route for source, process and pack. For an inorganic salt, a residual-solvent declaration is rarely the gap that matters. The real gaps are the hydrate, the water figure, the grade and the metals panel. If a document is missing, record the gap before the purchase order, not after the shipment arrives. Version numbers on the document list are more useful than a folder of undated files. ## Before the first order - The specification names the hydrate, the CAS number and the grade. - Food grade is stated; feed grade and technical grade are excluded. - COA, TDS, SDS, origin, allergen and GMO documents are present. - Metals results have been converted to the finished-product dose. - Label and claim wording have been reviewed for the destination. - Source, process and pack sit under change control. - Quotation, specification and certificate share one version. The manganese sulfate product page has the catalog specification; COA page guidance covers the lot certificate; analytical evidence is on the identity page. Methods notes describe the tests, and the quality page describes the release file. ### 06 How we prove a manganese sulfate lot is the monohydrate URL: https://nutrition.rainwoodbio.com/products/minerals/manganese-sulfate/identity/ Reviewed: 2026-11-19 A manganese sulfate lot is the monohydrate when four lines agree: the document names the hydrate and CAS 10034-96-5, IR and titration match the reference, the manganese figure is 31.5–33.0% with an assay of at least 98.0%, and water by Karl Fischer is 10.0–12.0%. The manganese figure alone cannot separate the monohydrate from the anhydrous salt, because a monohydrate result calculated on a water-free basis also lands near 36%. The water result and the basis line are what close the identification. In one lineIdentity is the agreement between the manganese figure, the water and the hydrate name; any one of them alone can describe a different salt. ## Four checks, one identity Identity is not one test. It is four answers that have to agree, and each answer rules out a different mistake. The document layer rules out a naming error. IR rules out the wrong salt family. Titration measures the metal and the monohydrate. Karl Fischer decides which hydrate was on the balance. A supplier who supplies only the first answer has supplied a label, not evidence. Four checks that together identify the monohydrate | Check | Question it answers | Method | What it establishes | Document | Is the hydrate named? | Name, CAS number, formula | Paperwork only | Spectroscopy | Are sulfate and water present? | IR spectrum | The salt family and the hydrate | Titration | How much manganese and monohydrate? | Complexometric titration | The metal and the assay | Water | Which hydrate was weighed? | Karl Fischer | The hydrate state and the mass balance ## The manganese-to-assay ratio The monohydrate is 32.5% manganese. The catalog pairs 31.5–33.0% manganese with an assay of at least 98.0%, and those figures fit: 31.9% manganese divided by 98.0% assay is 32.6%, the theoretical fraction. The anhydrous salt at the same assay gives 35.7 ÷ 98.0 = 36.4%. The ratio is a useful cross-check, but it is only valid when both figures share a basis. Here is the trap. A monohydrate certificate can report manganese on a water-free basis: 35.7 ÷ 98.0 = 36.4%, the same ratio as the anhydrous salt. The water line settles it. A Karl Fischer result of 10.0–12.0% means the monohydrate; a result near zero means the anhydrous salt. A ratio below the theoretical figure suggests dilution, excess moisture or a manganese salt with a lower metal fraction. Use the ratio as a prompt for the next question, not as a release test. ## X-ray diffraction and the solid state XRD compares crystal lattices. The monohydrate and the anhydrous salt do not share a pattern, and the other hydrates have their own, so a reference pattern makes the form comparison direct. Colour and solubility are weaker evidence because both forms are pale and both dissolve. XRD is not a routine release test here. A certificate that claims “XRD conforms” but omits the pattern and the reference has not shown much. Ask for the scan range, the reference and the detection limit. Thermogravimetry is a useful companion: it weighs the water as it leaves, and the size of the step separates a full monohydrate from a partly dried lot. On a disputed lot, XRD, water and titration together are stronger than any one alone. ## What adulteration looks like Substitutions to watch for and how they show | Material | Effect on the lot | Signal | Test | Magnesium sulfate | Colourless filler; lowers manganese | Manganese and assay low; magnesium high | ICP-OES, titration | Manganese chloride | Soluble and hygroscopic | Chloride high; water high | Ion chromatography, Karl Fischer | Manganese carbonate | Raises manganese per gram; reacts with acid | Gas on acid; manganese high for the mass | Acid test, titration | Manganese dioxide | Brown-black oxidiser | Colour; manganese high but insoluble | XRD, titration | Ferrous sulfate | Pale green; similar look | Iron high; manganese low | ICP-OES | Sodium sulfate | Colourless diluent | Sodium high; manganese low | ICP-OES | Water | Dilutes the powder | Karl Fischer high; as-is manganese low | Karl Fischer Colour is the weakest signal. Pale pink covers a wide range, and a blend can reproduce it. The stronger signals are the manganese figure against the assay, the water result and the impurity panel. A certificate that reports appearance and assay but not water has left the most likely substitution untested. ## Writing identity into the specification - “Manganese sulfate monohydrate, CAS 10034-96-5, MnSO4·H2O.” - “Assay ≥98.0% by complexometric titration; state the basis.” - “Manganese 31.5–33.0% by titration; state the basis.” - “Water 10.0–12.0% by Karl Fischer.” - “Identification by IR and titration, against a reference.” - “Particle size ≥95% through 40 mesh; metals and microbiology per the catalog.” - “No swap to the anhydrous salt or another manganese salt without written change control.” ## Five questions for the supplier - What hydrate is this lot, and what CAS number appears on the certificate? - Are the assay and the manganese figure reported on the same basis, and what is that basis? - What is the Karl Fischer water result, and does it sit inside 10.0–12.0%? - Can you provide the IR spectrum and, if the hydrate is disputed, an XRD pattern against a reference? - If a result is challenged, will you re-test the retained sample jointly with us? Those five answers, taken together, form an identity file; one assay figure does not. The catalog specification is on the manganese sulfate product page; the COA page places each figure on the certificate; the grades page compares the forms; the level-four comparison covers the fill consequences; the methods notes explain the titration. ### 01 What the COA for copper bisglycinate actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/copper-bisglycinate/coa/ Reviewed: 2026-11-19 Two laboratory results carry a copper bisglycinate lot: the HPLC assay of the chelate and the titration of elemental copper. Read with the infrared identity and the loss on drying, they show whether the powder is the 1:2 copper–glycine complex or something that merely contains copper. The limits below are the catalog target; each delivery is judged on its own certificate. In one lineThe chelate is released on two numbers that must agree: the HPLC assay and the elemental copper, with the glycine identity and the moisture beside them. ## The certificate as a test report A buyer should be able to reconstruct the release decision from the certificate without calling the supplier. That requires a test name, a method and an acceptance limit for every line, plus the measured value for the lot. Vague conformity statements hide which of those three is missing. Chemistry and physical release lines · copper bisglycinate | Test | Method | Acceptance limit | Appearance | Visual | Blue, free-flowing powder | Identification | FTIR and HPLC retention | Matches the reference | Assay | HPLC | 98.0–102.0% | Copper | Complexometric titration | 29.0–31.0% | Loss on drying | Gravimetric | ≤5.0% | Particle size | Sieve analysis | ≥95% through 40 mesh Elemental and microbiological limits · copper bisglycinate | Test | Method | Acceptance limit | Lead | ICP-MS | ≤3 mg/kg | Arsenic | ICP-MS | ≤2 mg/kg | Cadmium | ICP-MS | ≤1 mg/kg | Mercury | ICP-MS | ≤0.1 mg/kg | Aerobic plate count | Plate count | ≤1,000 cfu/g | Yeast and mould | Plate count | ≤100 cfu/g | E. coli | Absence test | Absent | Salmonella | Absence test | Absent ## Two figures, one molecule, and the basis they share An assay result is a statement about the molecule; a copper result is a statement about the metal. The formula fixes the relationship between them: C4H8CuN2O4 has a molar mass of 211.66, of which 63.55 is copper, so the calculated metal content is 30.0%. The two glycine ligands account for the other 70.0%. If the assay is 98.0%, the matching copper figure is about 29.4%; at 102.0% it is about 30.6%. Basis matters as much as the number. A certificate that reports copper as-is, with 5.0% moisture, implies 30.5% on a dried basis, which is higher than the formula allows; the same powder at 1.0% moisture implies 29.3% and is consistent. The certificate should therefore give the basis and the loss on drying in the same block, so the reader can repeat that calculation. Infrared identity is the third leg. When glycine binds copper, the carboxylate and N–H absorptions move; the resulting spectrum is not a superposition of glycine and a copper salt. HPLC retention then confirms the peak. A blend can be built to pass the assay or the copper line, but it is much harder to reproduce the coordinated spectrum as well. ## Release limit versus batch result An acceptance limit and a measured result are different pieces of information. The first defines the gate; the second describes the lot. A certificate that prints the specification range in both columns has not told the reader what the batch did. What the lot result should state for each line | Line | Acceptance boundary | What the batch result should show | Assay | 98.0–102.0% | A measured value, the basis and the HPLC method | Copper | 29.0–31.0% | A measured value and the titration method | Moisture | ≤5.0% | A measured loss on drying | Identity | FTIR and HPLC match | The spectrum and retention, or conformity to a named reference | Metals | Per element | A separate figure for each element, not a total | Microbiology | Counts and absence | Counts plus the absence statement | Mesh | ≥95% through 40 mesh | The measured percentage passing the sieve Two derived checks are worth making. Divide copper by assay: a pure chelate gives about 0.30. A result of 29.0% copper against a 102.0% assay gives 0.284, and 31.0% against 98.0% gives 0.316; both deserve an explanation. Then compare the loss on drying with the copper basis. Moisture can explain part of a low as-is figure, but it cannot explain a metal content above the formula value. ## What moves between batches Different unit operations leave different fingerprints on the certificate. Drying changes the loss on drying; milling and sieving change the particle-size result; crystallisation and drying move both the assay and the copper. Colour follows particle size, hydration and surface oxidation. Blue is a broad description. A paler shade may mean a finer powder or a diluted lot; a green tinge may mean a different copper species or moisture. Appearance is a prompt to investigate, not a release test, so the spectrum and the metal figure should decide. Look at the direction of travel across lots. Copper falling while moisture rises suggests a wet powder; copper and assay moving in opposite directions suggests a blend or a different source. Match the certificate's lot code to the pouch, drum and retained sample before accepting the story. ## When to order an outside test Outside testing is worth buying when the source is new, the market is regulated, the certificate is disputed, or the label depends on the chelate identity. A referee panel should answer the identity question, not simply repeat the supplier's assay: FTIR against a reference, HPLC assay, copper by ICP-OES, loss on drying, ICP-MS metals, microbiology and sieve. If a blend is suspected, add glycine by amino-acid analysis or ion chromatography. If solid form matters, add XRD. Every screen should come with a detection limit; otherwise a “not detected” result says more about the method than the material. Keep the chain of custody intact. The retained sample is the one to test, the report should name the lot, and a dispute should be settled on the sample both sides hold. Ask the referee to run the tests that discriminate between the chelate, free glycine and a copper salt. ## What to compare between suppliers When two suppliers are compared, place the following lines side by side: identity (form and CAS); assay and its basis; copper and its method; FTIR and HPLC evidence; loss on drying; the contaminant panel; the pack and the lot code. A match on assay alone is not a match on material. The catalog specification sits on the copper bisglycinate product page. How the chelate is proved is set out on the identity page; mesh and dilution on the grades page; moisture and pack behaviour on the stability page; the test methods in the methods library; the release sequence on the quality page. ### 02 Copper bisglycinate grades: chelate, mesh and the fill URL: https://nutrition.rainwoodbio.com/products/minerals/copper-bisglycinate/grades/ Reviewed: 2026-11-19 Copper bisglycinate reaches the buyer as one chemical entity — the 1:2 copper–glycine chelate, CAS 13479-54-4 — so what is left to choose is physical. Mesh, flow, dust and the decision to dilute into a carrier are the grade variables, and each one changes how the powder runs on a line. The copper figure stays near 30% unless a dilution is calculated and declared. In one lineThe grade decision has two layers: the chemical form fixes the copper figure at about 30%, and the physical form fixes how the powder flows, blends and fills. ## Three meanings of “grade” Three different purchases hide behind the word grade: a chemical form, a purity level and a particle size. In this product the chemistry is fixed. The catalog material is C4H8CuN2O4, CAS 13479-54-4, with an assay of 98.0–102.0% and copper at 29.0–31.0%, and the purity level is that catalog assay rather than a menu of potency options. Copper gluconate is a separate ingredient, not a coarse or fine version of this one; its CAS number, formula and copper figure all differ. The comparison belongs on the bisglycinate versus gluconate page, not in a mesh table. What remains here is the physical grade and the project-specific dilution. A carrier premix is a project material. Once the chelate is diluted, the copper figure, the carrier declaration, the assay and the label all move. That is not the catalog grade with a different mesh; it is a new specification with its own certificate. ## The catalog form and its options Copper bisglycinate options and the adjacent material | Option | Copper | Plant behaviour | Typical fit | What must be re-specified | Catalog powder, 40 mesh | 29.0–31.0% | Free-flowing; some dust | Capsules, tablets, dry blends | Nothing; this is the baseline | Granulated powder | 29.0–31.0% | Coarser; less dust | High-speed blending and tableting | Mesh, flow and dissolution rate | Carrier premix | Lower, calculated | Depends on the carrier | Low-dose blending | Carrier, label, assay and copper figure | Copper gluconate | 13.5–14.5% | Freely soluble; blue-green | Aqueous systems and dry blends | Identity, CAS, label and fill Rows one and two share a certificate template; row three needs a new one; row four is another product altogether. Treating any two of them as interchangeable at the same weight is the most common purchasing error in this family. ## Mesh, flow and the process A 40 mesh sieve opens at roughly 420 µm, and the catalog asks for at least 95% of the powder to pass it. Finer particles disperse faster but make dust and can segregate in a blend. A granule flows more evenly into a tablet die and raises less dust, at the cost of slower dissolution and a possible gritty feel in a drink mix. The process should choose the grade, not the other way round. Bulk density and flow rate are not in the catalog. If a feeder or a die needs a target, have the supplier measure it and write the result into the purchase specification; a mesh number does not predict how a particular powder will run. Granulation can be dry or wet, and a wet route adds water and a drying step to a material that already has a moisture limit. Ask which route is used before assuming two granulated samples behave alike. The chelate takes up moisture from an open container. Caking, a duller blue and a rising loss on drying are the usual signs, and a granule can lose its flow before any chemical result moves. Pack and storage therefore belong to the grade in practice, even when the certificate does not mention them. ## The copper figure and the fill The label declares copper in milligrams; the powder mass is an internal calculation. At the theoretical 30.0%, 1 mg of copper needs 3.33 mg of the chelate, 2 mg needs 6.67 mg and 3 mg needs 10.0 mg. At 29.0% the same claims need 3.45, 6.90 and 10.3 mg; at 31.0% they need 3.23, 6.45 and 9.68 mg. The catalog range moves the weigh-up by roughly 7% from bottom to top. Chelate mass for a copper claim across the catalog range | Label claim (Cu) | At 29.0% Cu | At 30.0% Cu | At 31.0% Cu | 1 mg | 3.45 mg | 3.33 mg | 3.23 mg | 2 mg | 6.90 mg | 6.67 mg | 6.45 mg | 3 mg | 10.3 mg | 10.0 mg | 9.68 mg A 2 mg claim puts about 7 mg of powder into a capsule that may weigh 300–500 mg. The copper source is a minor part of the fill, so the real problem is distributing it evenly, not finding room for it. A carrier premix or a granule can help; neither changes the copper figure, and a diluted grade changes both the figure and the label. The table is a calculation, not a dosing instruction. The brand and its regulatory reviewer own the label claim. The specification's role is to ensure that the copper figure used in the calculation is the one on the certificate. ## What to write into the specification - “Identity: copper bisglycinate, CAS 13479-54-4, C4H8CuN2O4.” - “Assay 98.0–102.0% by HPLC, with the basis named.” - “Copper 29.0–31.0% by complexometric titration.” - “FTIR and HPLC retention against a reference.” - “Loss on drying ≤5.0%; blue and free-flowing.” - “Particle size ≥95% through 40 mesh; a granulated option needs its own mesh and flow target.” - “Metals, microbiology, pack, lot code and destination market.” A granulated or diluted order is a new specification, not a footnote to the catalog one. State the grade and the form on the purchase order, and attach the mesh, flow or carrier details that apply. ## When a different grade is the wrong choice Granulation is the wrong lever when dissolution speed or suspendibility matters; granules can dissolve more slowly and can settle out of a drink. It is also unnecessary when the existing powder already feeds well and a new specification would add cost without a process gain. A carrier premix is wrong if the label names only the chelate and the carrier is undeclared; the carrier is an ingredient in its own right. An equal-weight swap to copper gluconate is wrong too: at about 14% copper it delivers less than half the metal, and the label name changes with the source. The level-four comparison covers that switch. The catalog specification sits on the product page. Release figures are explained on the COA page; the identity tests on the identity page; moisture and pack on the stability page; the other copper source on the copper gluconate page; sieve and assay methods in the methods library; the release sequence on the quality page. ### 02.1 Copper bisglycinate vs copper gluconate: the chelate, the copper and the fill URL: https://nutrition.rainwoodbio.com/products/minerals/copper-bisglycinate/grades/copper-bisglycinate-vs-gluconate/ Reviewed: 2026-11-19 Copper bisglycinate and copper gluconate are both copper(II) sources, but the chelate carries about 30% elemental copper against about 14% for the gluconate. The same label claim therefore needs roughly half the powder, while the gluconate is the form that dissolves freely and the chelate is handled as a dry solid. The choice turns on the matrix, the fill and the ingredient line. In one lineThe chelate carries about 30% copper and the gluconate about 14%, so the same claim needs roughly half the powder; the gluconate is the form that dissolves freely. ## A chelate and a salt Copper bisglycinate is a coordination compound: one copper ion is bound by two glycine ligands, each using its amino nitrogen and a carboxylate oxygen, so two five-membered rings close around the metal. The anhydrous formula is C4H8CuN2O4, molar mass about 211.66 g/mol, CAS 13479-54-4. Copper gluconate is an ionic salt: one copper ion and two gluconate anions, C12H22CuO14, molar mass about 453.84 g/mol, CAS 527-09-3. Both are copper(II) materials with an assay specified at 98.0–102.0%, and both are blue solids. The word chelate describes the ring structure; it is not a grade, a purity level or a claim about what the body does with the copper. The gluconate does not become a chelate by granulation. Copper bisglycinate and copper gluconate side by side | Property | Copper bisglycinate | Copper gluconate | CAS number | 13479-54-4 | 527-09-3 | Formula | C4H8CuN2O4 | C12H22CuO14 | Molar mass | About 211.66 g/mol | About 453.84 g/mol | Copper, calculated | 30.0% | 14.0% | Catalog copper range | 29.0–31.0% | 13.5–14.5% | Appearance | Blue powder | Blue-green powder | Water solubility | Slightly soluble; acidic solution | Freely soluble; blue-green solution | Label ingredient | Copper bisglycinate | Copper gluconate ## The copper figure, not the salt weight The label declares elemental copper, so the number that matters is copper per gram of powder. At 30.0%, 100 mg of the chelate carries 30.0 mg of copper; at 14.0%, 100 mg of the gluconate carries 14.0 mg. Across the catalog ranges the chelate delivers 29.0–31.0 mg and the gluconate 13.5–14.5 mg per 100 mg. The chelate is about 2.1 times more concentrated in the metal. That ratio cuts both ways. A formula that swaps the gluconate for the chelate at equal powder weight delivers more than twice the copper and overclaims the label; the reverse swap underclaims it. The correct conversion is by copper, not by salt, and it changes the weigh-up before anything else. Neither figure is a purity statement. Both materials can meet a 98.0–102.0% assay while carrying their own copper content; the certificate needs both lines. ## What the claim costs in powder The arithmetic is simple and worth writing down before the fill is chosen. At the theoretical figures, 1 mg of copper needs 3.33 mg of the chelate or 7.14 mg of the gluconate; 2 mg needs 6.67 mg or 14.3 mg; 3 mg needs 10.0 mg or 21.4 mg. The gluconate needs about 2.1 times the mass at every dose. Powder mass for the same copper claim | Label claim (Cu) | Copper bisglycinate at 30.0% | Copper gluconate at 14.0% | Extra gluconate mass | 1 mg | 3.33 mg | 7.14 mg | 3.81 mg | 2 mg | 6.67 mg | 14.3 mg | 7.62 mg | 3 mg | 10.0 mg | 21.4 mg | 11.4 mg The catalog ranges move the numbers by only a few percent: at 29.0% the chelate needs 3.45 mg for 1 mg of copper, at 31.0% it needs 3.23 mg; at 13.5% the gluconate needs 7.41 mg, at 14.5% it needs 6.90 mg. The gap between materials is far larger than the uncertainty inside either range. These figures are arithmetic, not a dosing instruction. The label claim belongs to the brand and its reviewer; the specification's job is to make the copper figure used in the calculation match the certificate. ## Solubility and the matrix The catalog describes the chelate as slightly soluble in water, with an acidic solution; the gluconate is freely soluble and gives a blue-green solution. For a stick pack, drink mix or liquid, the gluconate is the easier starting point. For a capsule, tablet or dry blend, the chelate's lower solubility is not a problem; it is a reason to keep the powder dry. Solubility is not stability. In water the chelate sits in equilibrium with its ligand and the copper ion; a low pH can protonate the glycine and shift the balance, and a higher pH can hydrolyse the copper. Copper is also redox-active, so a wet matrix with a reducing agent or dissolved oxygen needs its own hold-time work. Do not assume the two behave alike because both are blue. A formula built on the gluconate and switched to the chelate at the same weight will be under-copper and may not dissolve; the reverse switch will be over-copper and may change colour and pH. ## What the difference does to the fill A 2 mg copper claim uses about 6.7 mg of the chelate or 14.3 mg of the gluconate. In a 300–500 mg capsule both are small: the fill is mostly excipient, and the practical problem is uniformity, not capacity. The chelate leaves more room for other actives; the gluconate's larger mass can be easier to weigh at a very low dose. A premix is the usual answer. The copper source is diluted onto a carrier so that a few milligrams become a weighable portion that blends evenly. The carrier must be declared, and the diluted premix is a different specification with its own copper figure. A tablet needs a compressible premix and a granule that does not segregate. Capsule size follows the total fill, not the copper line alone. If the formula is tight the chelate can save a size; if other actives dominate the fill, the saving may not be visible. ## The label and the switch The label declares elemental copper and names the source: “copper (as copper bisglycinate)” or “copper (as copper gluconate)”. A switch changes that line, the specification, the certificate, the copper figure and often the fill weight. The salt mass is an internal number; the declared copper is the label number, and both come from the same certificate. The buyer's regulatory team confirms the form and the wording for the destination. A raw-material page cannot approve a label, and a certificate for one source does not cover the other. ## When to choose which Choose the chelate when the label names copper bisglycinate, the matrix is dry, and the fill benefits from the higher copper figure. Choose the gluconate when the label names it, the matrix is aqueous, and the fill can carry about 7.1 mg of salt per milligram of copper. Choose neither when the label names another copper source. Switching source changes the specification, the identity test and the label. It should go through change control rather than a substitution at equal weight. The product hub has the catalog specification; the grades page places this comparison in the wider range; the copper gluconate page is the other side; zinc bisglycinate runs the same chelate arithmetic with a different metal; the methods library covers the assay; the quality page covers release. ### 03 Copper bisglycinate stability: moisture, solution and the pack URL: https://nutrition.rainwoodbio.com/products/minerals/copper-bisglycinate/stability/ Reviewed: 2026-11-19 A blue chelate with limited water solubility is easiest to keep as a dry solid, and that is how copper bisglycinate is normally stored and sold. Moisture, heat and a wet matrix are the three variables that change the powder, the colour and the metal figure. The shelf life follows the pack and the storage condition, not the certificate. In one lineThe dry chelate is the stable form; moisture, heat and a wet matrix are what move the assay, the colour and the copper figure. ## The powder: moisture, caking and colour The catalog's ≤5.0% loss on drying is a release limit, not a licence to store the powder in humid air. Once a pouch is opened, moisture enters; the loss on drying climbs, the as-is assay falls and the powder may cake. A sound seal and a dry room are part of the practical specification. Caking shows up first. Lumps that do not break easily, a duller blue and a granule that stops flowing are all warnings. A green tinge may indicate a different copper species or moisture; appearance should trigger a test, not replace one. Warm storage accelerates all of this. A sealed pack usually survives a normal warehouse; it does not survive a hot loading bay or a car boot. If a pack has been cold, let it reach room temperature before opening so condensation does not form on the powder. A desiccant is useful only with a sound seal. ## The solution: a dilute, acidic and fragile format The catalog calls the chelate slightly soluble, and its solution acidic. That is not the same starting point as a freely soluble salt, so a formulator should establish the soluble range, the pH and the hold time before building a drink mix around it. In water the chelate is in equilibrium with glycine and copper. Low pH protonates the ligand and can pull the complex apart; higher pH can hydrolyse the metal and precipitate it. The usable window is a measured property of the matrix, not a general rule. Copper is redox-active. In a wet system it can react with reducing agents and oxygen, changing colour and consuming other ingredients. A solution that looks clear at mixing can fail a short hold. The dry powder avoids this class of problem, which is why capsules, tablets and dry blends are the natural formats. ## What drives change Variables that move copper bisglycinate in storage | Variable | Effect | Practical control | Moisture | Higher loss on drying; caking; colour change | Sealed foil pack; dry room; desiccant if needed | Heat | Faster moisture and matrix reactions | Controlled warehouse; cool processing | pH in a wet matrix | Dissociation at low pH; hydrolysis at high pH | Measure the window; buffer if required | Reducing agents | Reaction with copper; colour and assay loss | Segregate, or prove the premix | Oxygen | Oxidation at wet surfaces and in solution | Low headspace; sealed pack; process control | Light | Colour fading; secondary effect on the solid | Opaque or foil pack; dark store The variables interact. Warm, humid air is worse than moisture alone, and a wet matrix at the wrong pH with a reducing agent present is a different experiment from any one factor by itself. The useful question is not whether the chelate is stable, but in which pack, at which condition and for how long. ## A stability protocol for the ingredient Fix four things before starting: the pack, the storage condition, the time points and the test panel. The conventional arms are 25 °C/60% RH for long term, 30 °C/65% RH as intermediate and 40 °C/75% RH as accelerated; add a light arm if the pack is transparent. Test assay, copper, loss on drying, appearance and FTIR identity at each point, with microbiology at the ends. Report individual values rather than a verdict, and identify the pack and the lot family. A 1 kg pouch result does not automatically extend to a 25 kg drum: headspace, surface area and opening history differ. In a capsule or tablet, repeat the work in the matrix. Shell and excipients can transfer moisture even at low water activity. In a stick pack, inspect the seal as well as the powder; a pinhole is a pack failure that the powder result will not reveal until storage. ## The finished formula changes the answer A dry blend is the simplest matrix but not an inert one. Copper can catalyse oxidation of sensitive actives, so a premix containing ascorbic acid, a fat or another oxidation-prone ingredient needs compatibility data. Uniformity is the second issue: 3–10 mg per serving depends on the premix. Wet granulation adds water and drying to a moisture-limited material. If a granule is required, establish whether the route is dry or wet, then test the loss on drying and colour after storage. A capsule shell or film coat slows moisture but does not stop it. An overage is a label and stability decision; it cannot compensate for a leaky pack. ## How the shelf life is set No single shelf-life figure is published for this chelate. The retest period is written on the specification and supported by stability data for the pack and storage condition actually supplied. A number quoted without those details is not a shelf life. When the retest period ends, re-assay the retained sample before extending use. Do not extend by assumption, and do not transfer a bulk result to a repack. The standard packs are listed on the product page; release tests on the COA page; pack and lead time on the MOQ page; mesh and flow on the grades page; assay methods in the methods library; the release sequence on the quality page. ### 04 Copper bisglycinate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/copper-bisglycinate/moq/ Reviewed: 2026-11-19 The minimum order is 1 kg, packed in a foil pouch; a 25 kg fiber drum is the production pack, and standard orders leave within 1–7 days. To turn an enquiry into a firm quotation, six details are needed: the chelate and CAS, the assay and copper figures, the quantity and pack, the destination and Incoterm, the documents, and the intended market. Custom granulation or a carrier premix is quoted separately. In one lineOne kilogram is the smallest traceable pack; at about 30% copper it holds roughly 300 g of the metal, so the minimum is a traceability unit, not a dose unit. ## Why the minimum is 1 kg At about 30% copper, a kilogram of chelate contains some 300 g of the metal — 300,000 mg. That is 300,000 servings at 1 mg of copper, or 150,000 at 2 mg. A bench programme cannot use that much, so the minimum is not a dose calculation; it is the smallest unit that can be sealed, coded and sampled as one lot. A smaller quantity would be split from a bulk lot and repacked. The repack adds a handling step, the original pack identity is lost, and proving which lot the powder came from becomes harder. The 25 kg drum lowers handling per kilogram and suits production, but it ties up inventory and storage. Copper content also changes how packs are compared. A 1 kg pack of a 14% copper salt holds less than half the metal of the same weight here. Compare copper per pack, not just kilograms. ## Packs and formats Standard packs and quoted options | Format | Net fill | Where it fits | Handling note | Heat-sealed foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; record the opening date | Granulated powder | Quoted on request | Flow and dust control | New mesh and flow specification | Carrier premix | Quoted on request | Low-dose blending | Carrier, copper figure and label change The catalog powder passes 40 mesh at ≥95%. Granulation and dilution are not packing options; they change the specification. Tell us before the quotation if you need either one. On the drum, the inner liner is the barrier: keep it closed, keep the drum off a damp floor and note when it is opened. On the pouch, the seal is the barrier. A folded top is not a reseal, and the headspace now holds humid air. Move a long-held remainder into a smaller opaque container, or finish it within the stated in-use period. ## Lead time and dispatch Standard orders are dispatched 1–7 days after confirmation. That covers picking, documents and handover to the carrier; transit, customs and the customer's quality release sit outside it. A custom granulation, dilution or non-standard pack adds time, quoted separately. Ask for a dispatch date as well as a lead time. A drum may ship on a pallet and a pouch as a parcel; the Incoterm decides who books freight and who clears entry. Documents should travel with the goods, not follow them. ## What a quotation needs Six items make an offer firm enough to compare: - Ingredient and form. Copper bisglycinate, CAS 13479-54-4, with the chelate named. - Specification. Assay and basis, copper figure, loss on drying, mesh, metals and microbiology. - Quantity and pack. 1 kg pouch, 25 kg drum, granulated powder or carrier premix. - Destination and Incoterm. Country, address or port, and the trade term. - Documents. COA, specification, SDS and any market-specific statement. - Use and market. Supplement, food or another use, and where it will be sold. An offer without the form and the market is incomplete. The same powder can suit one destination and fall outside the file for another. Commercial terms are stated on the quotation, not on this page. ## The sample is a lot, not a demonstration The 1 kg pouch is the qualification lot. Check identity, assay, copper, loss on drying and microbiology before scaling, and retain material from the same pack. Sample, COA and quotation should share a lot code; a sample that cannot be traced is a demonstration. Because the dose is small, one pouch supports many bench trials and still leaves a retained sample. That is an argument for documenting the pack, not for assuming it will cover production. A smaller bench quantity is a repack and should be recorded as one. ## Terms to settle before the first order Before the first production order, settle the commercial and quality terms together. The quotation covers the specification, Incoterm, pack, lead time and documents; the quality agreement covers the specification revision, per-lot COA, retained sample, retest date and change control. Decide how a failing lot will be handled before it happens: a joint re-test on the retained sample, an agreed referee laboratory, and a clear answer on who pays. A photograph of powder is not a result. Returns and replacements should follow the same document. Also agree what counts as a change: source, process, pack or specification. Notification should be automatic, with a new COA and, where relevant, new stability data. The catalog specification sits on the product page. The COA page explains the release tests; the compliance page covers the market file; the grades page covers mesh and dilution; the methods library describes the tests; the quality page describes release. ### 05 The regulatory file for copper bisglycinate URL: https://nutrition.rainwoodbio.com/products/minerals/copper-bisglycinate/compliance/ Reviewed: 2026-11-19 Copper bisglycinate is supplied as copper bisglycinate, CAS 13479-54-4, and the regulatory file is built around that exact chelate, the destination and the finished-product dose. The catalog specification and the batch COA describe the material; they do not establish that the form or the level is permitted in a named market. The buyer's regulatory team confirms the route, and this page lists the framework, the limits and the documents that belong in the file. In one lineThe specification describes the chelate; the regulatory file shows the route, the copper limits and the label for the destination, and the buyer's team confirms it. ## What the file contains For copper bisglycinate the file is built around the chelate: the copper figure, the glycine ratio, the ligand identity and the oxidation state. The certificate is the lot record, the technical data sheet is the specification record, and the safety data sheet is the handling record. None of the three, on its own, tells the buyer whether the form is permitted in the destination market. The pack also carries the allergen and GMO statements, the origin record, the residual-solvent statement and any customer-specific declaration. If one of those is missing for the lot, name the gap before the order rather than at the port. A version-controlled document list is easier to audit than a folder of undated PDFs. Great Britain and Northern Ireland are checked separately. The GB file uses the current GB register and GB labelling rules; Northern Ireland follows the EU framework. The buyer's team confirms which of the two applies to the destination and keeps the evidence with the order. ## European Union The EU file rests on the general food law, Regulation (EC) No 178/2002, the food-supplement framework in Directive 2002/46/EC, the labelling rules in Regulation (EU) No 1169/2011, the contaminant rules in Commission Regulation (EU) 2023/915, and the nutrition and health claims rules in Regulation (EC) No 1924/2006. The current consolidated texts are the reference; this summary is not a substitute for them. Two reference points are useful when the dose is set. The labelling reference intake for copper is 1 mg/day under Regulation (EU) No 1169/2011, Annex XIII, and the tolerable upper intake for adults used in the EU risk assessment is 5 mg/day. Neither is a permission to place a particular form on the market, and neither replaces the destination member state's position. As of this review, the buyer's regulatory team confirms the route and checks the current text, including any national limit on copper in food supplements. ## United States The US file is built on the dietary-supplement route: the Federal Food, Drug, and Cosmetic Act as amended by the Dietary Supplement Health and Education Act of 1994, the current good manufacturing practice rules in 21 CFR 111, and the Supplement Facts rules in 21 CFR 101.36. A dietary ingredient that is not an old dietary ingredient needs a new dietary ingredient notification under 21 USC 350b; the supplier should be able to say which basis it relies on. The tolerable upper intake for copper used in the US assessment is 10 mg/day for adults, and the Daily Value is set in the current Supplement Facts regulations. The buyer confirms that the ingredient's status and the finished-product dose fit the route. The label and any structure/function wording are reviewed separately from the certificate, and the current text should be checked as of this review. ## Contaminants and limits The contaminant panel is a finished-product calculation, not only a drum result. The table below is a starting point for a food-supplement file; the destination text and the daily dose decide the final limit. Contaminant and dose checks for the finished product | Parameter | Typical supplement reference | What the file should show | Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method, limit and finished-product calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception that applies | Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result and method | Arsenic (As) | Customer or market limit | The agreed limit and the method, stated on the certificate | Copper per daily dose | The declared figure and the upper intake | The dose arithmetic from the label to the finished product The copper line is the one that is easy to leave out. A premix or a capsule may meet the contaminant panel and still deliver a copper dose that the destination does not accept. The calculation starts from the chelate's copper figure, 29.0–31.0%, and ends at the declared elemental copper on the label. ## Label and claims The label names the source of the copper: “copper (as copper bisglycinate)”. The declared quantity is elemental copper, not the chelate mass. The claim review is separate: the brand's regulatory reviewer confirms that the wording is allowed for the product, the form and the market, and that any permitted claim meets its conditions. The certificate does not approve a claim, and a claim does not change the specification. No disease-related claim is made for this material, and the raw-material page is not a label. Where a permitted claim for copper is used, it is the finished product that carries it, at the dose and in the wording that the destination register allows. The brand's reviewer keeps the evidence for the claim with the label file. ## Documents the file needs - Specification with the version, CAS number and chelate name. - COA for the lot, with assay, copper, identity, loss on drying and contaminants. - Technical data sheet and safety data sheet. - Allergen, GMO, origin and residual-solvent statements. - Elemental-impurity and microbiology results, with methods. - Stability summary for the pack being bought. - Packaging declaration and change-control statement. - Halal or kosher certificates where the market requires them. The documents should refer to the same specification version and the same lot family. A COA for a different pack, a specification from an earlier revision and a stability summary for another product do not make a file. ## Checklist before the first order - Specification version, CAS and the chelate form are named. - COA, TDS, SDS and the declaration set are on file. - The copper figure is converted to the declared elemental copper. - The contaminant results are converted to the finished-product dose. - The label and any claim have been reviewed for the destination. - The source, process and pack are under change control. The product hub carries the catalog specification; the COA page explains the lot certificate; the identity page covers the analytical evidence; the copper gluconate page shows the same file for the other salt; the methods library describes the tests; the quality page describes the release file. ### 06 How to prove a copper bisglycinate lot is the chelate URL: https://nutrition.rainwoodbio.com/products/minerals/copper-bisglycinate/identity/ Reviewed: 2026-11-19 A copper bisglycinate lot is the named chelate when the document, the infrared spectrum, the HPLC assay and the copper titration agree. The formula C4H8CuN2O4 fixes copper at 30.0% and the two glycine ligands at about 70%, so a copper figure near 30% is a direct check on the form. The assay alone cannot separate the chelate from a blend, and the copper alone cannot separate it from another copper salt. In one lineIdentity is the agreement of three measurements: the infrared spectrum shows the glycine–copper bonds, the copper figure lands near 30%, and the mass balance closes with moisture. ## The identity layers A certificate can name the right material and still fail to prove it. Each layer below answers a separate question, and each needs its own evidence. A supplier who answers only the first has described the paperwork, not the powder. Layers of copper bisglycinate identity | Layer | Question | Test | What it proves | Document | Is the chelate named? | Name, CAS number, formula | Paperwork only | Infrared | Is glycine coordinated to copper? | FTIR against a reference | The chelate, not a blend | Chromatography | Is the peak the chelate? | HPLC retention and assay | The molecule and its quantity | Copper | Is the metal figure right? | Complexometric titration | The copper content | Mass balance | Is it diluted or wet? | Assay, copper, loss on drying | Consistency of the numbers | Solid state | Is it the expected crystal form? | X-ray diffraction | The solid form, not the purity ## The copper ratio: 30% is the fingerprint The anhydrous formula gives 63.55 ÷ 211.66 = 30.0% copper, with the two glycine ligands making up the rest. The molar ratio is one copper to two glycines. A result near 30.0% with an assay of 98.0–102.0% is consistent with the chelate; a figure well below 30% points to free glycine, a diluent or a different complex, and a figure well above 30% points to a copper salt or oxide with a higher metal content. The catalogue range is 29.0–31.0% copper, and that window is narrow enough to catch a gross blend. Adding 5% free glycine to the chelate lowers the copper figure to about 28.5%, below the range. Adding 5% copper sulfate pentahydrate, at about 25.4% copper, leaves the blend near 29.8% and inside the range; the sulfate and the infrared spectrum are then the lines that catch it. A blend can be built to pass one number, which is why the layers are read together. The mass balance is the third check. A powder with 4.0% loss on drying and a 29.5% as-is copper result carries about 30.7% copper on a dried basis, above the formula figure. That does not prove adulteration, but it does mean the moisture and the copper have to be explained together. The certificate should give the loss on drying beside the assay and the copper, not on a separate page. ## X-ray diffraction: the solid-state check X-ray diffraction answers a different question: is the solid crystalline, and does its pattern match a reference? Copper bisglycinate can exist in more than one solid form, and a hydrate, a different polymorph or an amorphous carrier will not give the same pattern. XRD can also compare lots from two sources when the chemical tests agree but the powders behave differently in a blend. It is not a purity assay and does not measure the counter-ion. Ask for the reference pattern, the sample preparation and the detection limit before reading a “match” statement. A certificate that reports only “XRD conforms” without the pattern has added little. The method is most useful when the question is solid form, tablet behaviour or the difference between a crystalline chelate and a carrier-based premix. ## What adulteration looks like Substitutions and the signals for copper bisglycinate | Adulterant | What it does | Signal | Test | Free glycine | Lowers copper; raises the ligand fraction | Copper below 29%; IR shows free glycine | Copper titration, FTIR, amino-acid analysis | Copper sulfate | Raises copper; adds sulfate | Sulfate present; IR differs | Sulfate test, FTIR, ICP-OES | Copper oxide | Raises copper sharply; insoluble black solid | Copper above 31%; black particles | Copper titration, XRD, visual | Copper gluconate | Lowers copper to about 14% | Copper far below range; gluconate IR | Copper titration, FTIR | Inert diluent | Lowers assay and copper together | Both low; ash or residue | Assay, copper, mass balance | Moisture | Raises loss on drying; lowers as-is assay | LOD high; dried assay normal | Loss on drying | Dye | Matches blue colour without copper | Colour without a copper figure | Copper titration, FTIR Colour is the weakest signal. Blue covers a wide range, and a dye can reproduce it. The stronger signals are the copper figure, the infrared spectrum and the mass balance. A certificate that reports appearance and assay but not identity has left the most likely substitution untested. ## How to write the identity into the specification - “Copper bisglycinate, CAS 13479-54-4, C4H8CuN2O4.” - “Assay 98.0–102.0% by HPLC; state the basis.” - “Copper 29.0–31.0% by complexometric titration.” - “Identification by infrared spectrum against a reference and by HPLC retention.” - “Loss on drying ≤5.0%; particle size ≥95% through 40 mesh.” - “No free glycine, copper sulfate or other copper salt above the agreed limit.” - “Destination market and form confirmed before the order.” ## Five questions for the supplier - Which chelate is this lot, and which CAS number is on the certificate? - Can you provide the infrared spectrum and the HPLC chromatogram, not only the assay percentage? - What is the copper result, by which titration method, and on which basis? - What is the loss on drying for this lot, and how does the copper figure close the mass balance? - If the lot is disputed, will you accept a joint re-test on the retained sample? The five answers above are what makes an identity file; a lone assay figure is not enough. The hub carries the catalog specification, the COA page maps the certificate lines, the grades page compares the physical forms, the copper gluconate page covers the other copper source, the methods library explains the tests, and the quality page describes release. ### 01 What the dicalcium phosphate COA reports, line by line URL: https://nutrition.rainwoodbio.com/products/minerals/dicalcium-phosphate/coa/ Reviewed: 2026-11-19 A dicalcium phosphate certificate is a list of measured values, not a description of the product. It should carry appearance, identification, assay as CaHPO₄, elemental calcium, elemental phosphorus, loss on drying, the heavy-metal panel, microbiology and sieve results, each with its method and the limit the lot had to meet. The tables below give the catalog specification; the certificate records what one lot actually reached. In one lineThe assay alone cannot describe the salt: the certificate has to report calcium and phosphorus separately, on a stated basis, and name the hydrate it dried. ## What the certificate has to carry A reader should be able to check a certificate line by line. Each entry should say what was measured, how it was measured and the limit the lot had to meet; a bare “conforms” removes the evidence. Appearance is descriptive, while identification, assay, calcium, phosphorus and loss on drying characterise the powder. Identification is by infrared and titration, as the catalog requires. The assay is an EDTA titration of calcium expressed as CaHPO₄; phosphorus comes from a separate spectrophotometric determination, usually the molybdenum blue complex after acid digestion. The split matters: assay and calcium can be the same titration expressed two ways, while phosphorus is an independent result. Release parameters for dicalcium phosphate | Parameter | Method | Release limit | Identification | Infrared and complexometric titration | Conforms to the reference | Assay | Complexometric titration, calculated as CaHPO₄ | 98.0–102.0% | Calcium | Complexometric titration | 29.0–30.0% | Phosphorus | Spectrophotometry after acid digestion | 22.0–23.5% | Loss on drying | Gravimetric, oven | ≤2.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh The heavy-metal and microbiology lines are a safety gate, not chemistry. Report them per element and per test, with counts and absence statements. ## The assay basis and the calcium-to-phosphorus arithmetic Pure CaHPO₄ is 29.46% calcium and 22.76% phosphorus by mass. The catalog windows sit close to those figures: 29.0–30.0% calcium and 22.0–23.5% phosphorus. The assay is calculated as CaHPO₄ and its basis has to be stated. A certificate that reports the assay on the dried basis and the calcium on the as-received basis has put two different powders on one page. The arithmetic links the three figures. If the assay comes from the calcium titration, 98.0% CaHPO₄ corresponds to 28.87% calcium, below the 29.0% calcium floor. The calcium floor corresponds to 98.44% assay. The calcium window is therefore the tighter gate at the bottom of the range, and a lot can fail it while its assay still reads inside 98.0–102.0%. The catalog contains both lines, so both are release criteria. Phosphorus is the independent check. The phosphorus window of 22.0–23.5% corresponds to roughly 96.7–103.3% CaHPO₄, wider than the assay gate at both ends. A lot that reads 29.5% calcium and 22.4% phosphorus has a phosphorus-to-calcium mass ratio of 0.759, against 0.773 for pure CaHPO₄. The gap is small, but a ratio near 0.52 points towards tricalcium phosphate, and a ratio near zero points to a calcium salt with no phosphate at all. Loss on drying is the third part of the basis. The catalog limit is ≤2.0%. Moisture does not change the ratio, but it changes every percentage reported on the as-received basis, and it is the figure that moves first when a pouch is left open. ## Limits and results, side by side The limit is the gate; the result is what the laboratory found. A certificate should show the two in different columns and put the method next to both. Printing the specification range in the result column gives a copy of the gate, not a result. What the result column should contain | Parameter | Release limit | Result column | Assay | 98.0–102.0% as CaHPO₄ | A measured percentage with the drying basis and the titration method | Calcium | 29.0–30.0% | A measured percentage on the same basis as the assay | Phosphorus | 22.0–23.5% | A measured percentage with the spectrophotometric method | Loss on drying | ≤2.0% | A measured percentage, with the oven temperature and time | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot | Particle size | ≥95% through 40 mesh | The measured percentage through the sieve “Passes specification” is a conclusion, and the numbers should let the reader reach it. Heavy metals need one figure per element; a combined total hides which element is present. ## What shifts from lot to lot The lime and phosphate sources, the precipitation pH and the drying step move the calcium and phosphorus figures. Drying also decides the hydrate: a powder dried to the anhydrous salt carries no water of crystallisation, and a dihydrate carries about 21% by mass. The catalog names the anhydrous powder, so a certificate that reports a dihydrate water figure is describing a different grade. Phosphorus and calcium should be trended together. A drift in one figure with the other steady changes the ratio and points to a change in the reaction or in the raw material. Fluoride and lead are the lines to read on every lot, because both come from the phosphate rock and neither is removed by milling. Fluoride may be outside the catalog panel and inside the destination market's additive specification; ask for it when the destination requires it. Particle size is a finishing specification. A change of mill or sieve moves the 40 mesh result without any change in the chemistry, and bulk density and flow are not on the catalog list at all. ## When an outside test is worth it An outside test is worth ordering for a new source, a first shipment into a regulated market, a disputed hydrate or a blend that behaves unlike its certificate. The panel is calcium by EDTA with the pH and indicator stated, phosphorus by spectrophotometry with the digestion described, loss on drying, the heavy-metal panel by ICP-MS, microbiology and particle size. Add X-ray diffraction when the hydrate or the crystal form is in question, and a fluoride determination when the destination sets a limit. Ask the laboratory to state the sensitivity of each screen. A “not detected” entry with no limit of quantification says more about the method than about the lot. A phosphorus figure that omits the sample mass and the moisture correction cannot be checked. The report must carry the lot code, and the powder tested must be the powder retained. ## Comparing two suppliers Six lines show whether two offers describe the same powder: hydrate and CAS number; assay with its basis; calcium and phosphorus with their methods; loss on drying; heavy metals and microbiology; particle size and bulk density. An offer that matches on assay but not on hydrate or basis is an offer for a different powder. The catalog figures sit on the dicalcium phosphate product page. The identity page sets out the calcium-to-phosphorus check, the grade page compares the anhydrous salt with the dihydrate, the calcium carbonate page is the reference for the carbonate that would show up as a phosphorus gap, the methods index describes the tests, and the quality page describes the release workflow. ### 02 Anhydrous or dihydrate: choosing a dicalcium phosphate grade URL: https://nutrition.rainwoodbio.com/products/minerals/dicalcium-phosphate/grades/ Reviewed: 2026-11-19 Dicalcium phosphate is sold as the anhydrous salt (CAS 7757-93-9) and as the dihydrate (CAS 7789-77-7), and the two are different specifications, not two names for one powder. The anhydrous salt is 29.46% calcium and 22.76% phosphorus by formula; the dihydrate is 23.29% calcium and 18.00% phosphorus and carries about 21% water of crystallisation. The grade decision is the hydrate first, then the particle form. In one lineThe hydrate is the grade: it sets the calcium and phosphorus per gram and the water the powder carries, while the particle form decides how it runs on a press. ## Why one formula comes in two hydrates Dicalcium phosphate is made by reacting a calcium source with phosphoric acid and drying the precipitate. The drying step decides the solid phase. Dried to remove the water of crystallisation, the product is the anhydrous salt, CaHPO₄. Dried under milder conditions, the product is the dihydrate, CaHPO₄·2H₂O. Both are the same calcium-to-phosphorus compound, and both are practically insoluble in water, but they are not interchangeable by mass. The hydrate also changes the commercial grade. A powder intended for direct compression needs a defined particle distribution, a bulk density and a flow that the standard powder does not have, so suppliers offer a granulated or a compaction-grade form. That form is a physical grade of the same chemistry, and it should be named in the purchase specification alongside the hydrate. The catalog material is the anhydrous powder at ≥95% through 40 mesh. The dihydrate and the granulated form are the alternatives to compare against it, and each one changes the label arithmetic. ## The forms side by side Anhydrous, dihydrate and granulated dicalcium phosphate | Property | Anhydrous | Dihydrate | Granulated | Formula | CaHPO₄ | CaHPO₄·2H₂O | CaHPO₄, agglomerated | CAS number | 7757-93-9 | 7789-77-7 | Same as the base salt | Calcium | 29.46% theoretical | 23.29% theoretical | Unchanged by granulation | Phosphorus | 22.76% theoretical | 18.00% theoretical | Unchanged by granulation | Water of crystallisation | None | About 21% by mass | None or 21%, per base | Loss on drying | ≤2.0% | Reports the hydrate water | Depends on the base and the binder | Particle form | Powder, 40 mesh | Powder or granule | Coarse, free-flowing | Usual fit | Dry blends, capsules, tablets | Wet granulation, some tablets | High-speed tableting The water figure is the line that separates the first two columns. A certificate that reports 20% loss on ignition for a material ordered as anhydrous is describing the dihydrate, whatever the label on the drum says. The granulated column is not a third chemistry; it is a physical form of one of the first two, and the specification should say which. ## Particle, density and the tablet press The catalog fixes one physical line: ≥95% through 40 mesh. Bulk density, tapped density, flow and compressibility are not on that list, and they are the properties that decide whether the powder can be filled at speed. A standard powder can run in a capsule or a simple blend; a direct-compression tablet needs a denser, freer-flowing grade, and the supplier should provide the density and the flow data for the lot. The anhydrous salt is the safer base for a moisture-sensitive tablet. The dihydrate carries water in the crystal, and heat can drive it off; a drying step or a hot granulation can change the phase and release water into the blend. That is not a defect in the dihydrate, but it is a reason to match the hydrate to the process rather than to convenience. Dicalcium phosphate is abrasive enough to matter to tooling, and its flow and compaction behaviour change with the particle form. The press trial should run the grade that will be bought, not a sample of a different density. ## Dose arithmetic and the label Calcium is the figure the label declares, so the salt weight follows from the calcium content. A 500 mg calcium dose needs 1.70 g of the anhydrous salt (500 ÷ 0.2946) or 2.15 g of the dihydrate (500 ÷ 0.2329). A 1,000 mg dose needs 3.39 g or 4.30 g. The hydrate changes the mass in the capsule, not the calcium. Phosphorus comes along at a fixed ratio. One mole of calcium carries one mole of phosphorus, so 500 mg of calcium brings about 386 mg of phosphorus from either hydrate, and 1,000 mg of calcium brings about 773 mg. The dihydrate does not dilute the ratio; it only adds water to the weight. That is why the hydrate must be declared before the dosage form is sized, and why a formula that needs a low phosphorus load has to change salt rather than change hydrate. The label arithmetic has one more step. If the supplement facts panel declares calcium, the figure is elemental calcium, not the weight of the salt. The ingredient statement names the salt; the nutrient panel names the element. A formula that confuses the two will overstate or understate the dose by about a third. ## What to write into the specification - “Dicalcium phosphate, anhydrous [or dihydrate], CAS 7757-93-9 [or 7789-77-7], CaHPO₄.” - “Assay 98.0–102.0% as CaHPO₄; calcium 29.0–30.0%; phosphorus 22.0–23.5%.” - “Loss on drying ≤2.0% for the anhydrous grade; state the hydrate and the water figure for the dihydrate.” - “Particle size ≥95% through 40 mesh; bulk density and flow if the powder is to be compressed.” - “Heavy metals Pb ≤3, As ≤2, Cd ≤1, Hg ≤0.1 mg/kg; microbiology as listed; fluoride if the destination requires it.” - “No calcium carbonate, calcium sulfate, tricalcium phosphate or silica added.” - “Hydrate, particle form and manufacturer under change control.” The negative clause matters because calcium sulfate carries about 29.4% calcium, the same figure as dicalcium phosphate. A specification that tests calcium only will not see the substitution; the phosphorus line and the ratio are what see it. ## When another salt is the better choice If the product has to give a clear solution, dicalcium phosphate is the wrong salt: it is practically insoluble in water and dissolves only by reacting with acid. If the formula needs more calcium per gram and less phosphorus, tricalcium phosphate carries about 38.8% calcium with 20.0% phosphorus, and the dicalcium versus tricalcium comparison sets out the arithmetic. If the matrix is acidic and must stay clear, calcium citrate or calcium lactate is the practical starting point, and calcium carbonate is the compact high-calcium alternative when the acid reaction is acceptable. Feed-grade dicalcium phosphate is outside this specification. It is a different product with different contaminant limits and a different documentation set, and it should not be bought against a food or supplement specification. The dicalcium phosphate product page carries the catalog figures; the COA page shows how the calcium and phosphorus lines are reported; the identity page covers the ratio and the diffraction check; the quality page describes the release workflow. ### 02.1 Dicalcium phosphate vs tricalcium phosphate: the Ca : P ratio and the fill URL: https://nutrition.rainwoodbio.com/products/minerals/dicalcium-phosphate/grades/dicalcium-phosphate-vs-tricalcium-phosphate/ Reviewed: 2026-11-19 Dicalcium phosphate (CaHPO₄) carries one calcium per phosphorus: 29.46% calcium and 22.76% phosphorus by formula, a mass ratio of 1.29 : 1. Tricalcium phosphate (Ca₃(PO₄)₂) carries three calcium per two phosphorus: 38.76% calcium and 19.97% phosphorus, a mass ratio of 1.94 : 1. The ratio changes the tablet weight, the phosphorus that arrives with each milligram of calcium, and the name on the label. In one lineThe two salts differ by the Ca : P ratio before they differ by anything else: dicalcium phosphate is 1.29 : 1 by mass, tricalcium phosphate 1.94 : 1, and the difference sets the dose and the fill. ## Two formulas, two ratios The ratio is fixed by the formula, not by the supplier. One mole of dicalcium phosphate contains one mole of calcium and one mole of phosphorus; one mole of tricalcium phosphate contains three moles of calcium and two of phosphorus. Expressed as mass, the first is 1.29 parts calcium to one part phosphorus and the second is 1.94 to one. That is the whole difference in chemistry, and it drives every practical consequence below. Dicalcium and tricalcium phosphate by formula | Property | Dicalcium phosphate | Tricalcium phosphate | Formula | CaHPO₄ | Ca₃(PO₄)₂ | CAS number | 7757-93-9, anhydrous | 7758-87-4 | Calcium | 29.46% | 38.76% | Phosphorus | 22.76% | 19.97% | Ca : P by mass | 1.29 : 1 | 1.94 : 1 | Ca : P by mole | 1 : 1 | 1.5 : 1 | Phosphorus per 1,000 mg calcium | About 773 mg | About 515 mg The catalog figures follow the formula. Dicalcium phosphate is specified at 29.0–30.0% calcium and 22.0–23.5% phosphorus; a tricalcium phosphate specification sits near 38–40% calcium and 19–20% phosphorus. A certificate that reports 38% calcium against a dicalcium specification has not passed the wrong test — it has described a different salt. ## Solubility and the acid reaction Both salts are practically insoluble in water, so neither will give a clear drink at neutral pH. Both dissolve in dilute acid, but dicalcium phosphate is the more acid-soluble of the two and reacts at a lower acid strength. In an acidic matrix, such as a ready-to-drink with a low pH or an effervescent granule, the dicalcium salt goes into solution more readily; the tricalcium salt leaves more of the powder undissolved and more grit in the mouth. Solubility is not the same as absorbability, and this page makes no claim about either. The point is physical: a formula that must be clear, or must react quickly with an acid, is asking for a salt that dissolves, and neither of these is a good choice for a clear solution. The alternative is a soluble salt such as calcium citrate or calcium lactate, and the acid reaction of calcium carbonate is the other reference point. ## Which one fills the tablet Dicalcium phosphate is a standard direct-compression diluent. It flows, it compacts and it carries a calcium figure at the same time, which is why it appears in tablets that need bulk as well as a mineral. The anhydrous grade is the better base for a moisture-sensitive tablet; the dihydrate carries water that heat can release. Tricalcium phosphate carries more calcium per gram, so a tablet that has to deliver a high calcium dose in a small unit needs less of it. It is also used as a filler and an anti-caking aid in its own right. The choice between them is therefore a balance of three numbers: the calcium claim, the phosphorus that comes with it, and the mass the tablet can carry. A formulator who picks on calcium content alone will discover the phosphorus figure after the label is written. ## The dose arithmetic A 500 mg calcium dose needs 1.70 g of dicalcium phosphate or 1.29 g of tricalcium phosphate. The first brings about 386 mg of phosphorus; the second brings about 258 mg. At a 1,000 mg calcium dose the masses are 3.39 g and 2.58 g, and the phosphorus figures are about 773 mg and 515 mg. The gap is 258 mg of phosphorus at the same calcium claim, which is large enough to matter when the rest of the diet is counted. Salt mass and phosphorus at three calcium doses | Calcium dose | Dicalcium phosphate | Phosphorus from it | Tricalcium phosphate | Phosphorus from it | 250 mg | 0.85 g | 193 mg | 0.65 g | 129 mg | 500 mg | 1.70 g | 386 mg | 1.29 g | 258 mg | 1,000 mg | 3.39 g | 773 mg | 2.58 g | 515 mg For context, the US Institute of Medicine set a tolerable upper intake level for phosphorus of 4,000 mg per day for adults aged 19–70. A 1,000 mg calcium dose from dicalcium phosphate supplies about 19% of that figure; the same dose from tricalcium phosphate supplies about 13%. The phosphorus is not a reason to avoid either salt, but it is a reason to declare the salt and to count the whole formula. ## What the label names In the European Union the two salts have separate additive entries: E 341(ii) for dicalcium phosphate and E 341(iii) for tricalcium phosphate. The additive specification for the dicalcium entry sets the assay at 98–102% of CaHPO₄ after drying at 200 °C for three hours, and the two entries are not interchangeable on a label. In the United States, 21 CFR 182.1217 covers calcium phosphate as the mono-, di- and tribasic forms under one GRAS listing, but the ingredient statement still has to name the salt that is in the product. “Calcium phosphate” alone leaves the reader, and the reviewer, unable to tell which ratio was used. The nutrient panel declares elemental calcium; phosphorus is a separate figure and should be declared when the formula supplies a meaningful amount. The hydrate belongs on the label too. Anhydrous and dihydrate dicalcium phosphate give different calcium per gram, and the ingredient name that does not name the hydrate is incomplete for a dosage calculation. ## When to choose each Choose dicalcium phosphate when the formula wants a calcium-to-phosphorus ratio near 1.3 : 1, a direct-compression filler that also carries a mineral, or a calcium salt that dissolves more readily in an acidic matrix. Choose tricalcium phosphate when the claim needs more calcium per gram, when the phosphorus load has to be lower for the same calcium figure, or when a granulation with a higher calcium load per gram is needed for a small tablet. Choose neither when the product must be a clear solution, and choose neither on the assumption that the two can be swapped gram for gram: they cannot, because the calcium and phosphorus figures move together in opposite directions. The dicalcium phosphate product page carries the catalog specification; the grade page covers the hydrate choice; the COA page shows how the two elemental lines are reported; the compliance page covers the market file; the calcium carbonate page and the calcium citrate page are the other two calcium references; the methods index describes the assays. ### 03 Dicalcium phosphate stability: moisture, heat and the pack URL: https://nutrition.rainwoodbio.com/products/minerals/dicalcium-phosphate/stability/ Reviewed: 2026-11-19 Dicalcium phosphate is a stable, practically insoluble salt. The two failure modes are moisture pickup and, for the dihydrate, loss of water of crystallisation when the powder is heated. The anhydrous grade is the more robust choice for a moisture-sensitive tablet, and the pack decides how much water reaches the powder. In one lineThe anhydrous salt is stable; the dihydrate carries about 21% water that heat can drive off, and the pack decides how much moisture either form meets. ## The powder: moisture, heat and caking The anhydrous salt does not oxidise, does not hydrolyse on the shelf and does not change colour under normal storage. Its assay, calcium and phosphorus figures stay where they were. What moves is the loss on drying: an open pouch in a humid room picks up surface moisture, the powder cakes, and the flow that the tablet press needs disappears. The assay on the as-received basis falls with the moisture even though the dry matter has not changed. Heat matters more for the dihydrate. Above about 100 °C the crystal water is driven off and the dihydrate converts towards the anhydrous salt. That is useful in a kiln and unwanted in a drying oven, a hot granulation or a tablet coating step. A formulator who buys the dihydrate for its handling and then dries the granule at 110 °C has changed the hydrate after the certificate was issued. The anhydrous grade has no crystal water to lose, which is why it is the usual choice for a moisture-sensitive active. Colour is a weak indicator. Both hydrates are white, and a batch that is slightly off-white usually reflects the lime source or the drying step rather than a stability failure. Ask for the LOD and the assay before reading anything into the shade. ## The slurry and the acid solution Dicalcium phosphate is practically insoluble in water, so a “solution” of it is a suspension. The suspension is not a storage format: the powder settles, the pH of the water moves as the salt equilibrates, and a wet slurry is a good medium for microbial growth. A process that needs the salt in water should use it fresh and should not hold the slurry overnight without a preservative and a microbial check. In dilute acid the salt dissolves. That is the reaction behind an effervescent or an acidic beverage, and it is also the point at which the calcium and the phosphate become free to interact with the rest of the formula. If the pH rises again, for example when a carbonate or an alkaline ingredient is added, the phosphate can reprecipitate. The result is a haze, a sediment or a loss of the clear appearance that the formula was designed for. The acid reaction is therefore a formulation question, not only a solubility figure. ## What drives degradation Variables that move a dicalcium phosphate lot | Variable | Effect | What to watch | Humidity | Surface moisture, caking, lower as-received assay | Loss on drying, flow, package integrity | Heat above 100 °C | Dihydrate loses crystal water | Hydrate identity, LOD, tablet hardness | Acid | Dissolves the salt; frees calcium and phosphate | pH, haze, reprecipitation on storage | Alkaline or carbonate ingredient | Can raise pH and precipitate phosphate | Order of addition, final pH | Compaction | Density and hardness change; no chemical change | Press trial on the purchased grade | Particle size | Flow, segregation, acid reaction rate | Sieve result, bulk density The table is deliberately short. Dicalcium phosphate is not a fragile material, and a long list of degradation pathways would suggest a sensitivity the salt does not have. The real risks are the water in the dihydrate, the water in the room, and the pH of the matrix. ## A stability protocol for the ingredient A workable protocol holds the powder in the pack it will be sold in at 25 °C and 60% relative humidity for real-time data, and at 40 °C and 75% relative humidity for an accelerated arm. Test at zero, three and six months on the accelerated arm, and at zero, three, six, twelve and twenty-four months on the real-time arm. The panel is assay, calcium, phosphorus, loss on drying, the heavy-metal screen at the ends, microbiology, particle size and flow. For a dihydrate, add X-ray diffraction at each point to show that the phase has not changed. If the material is going into a tablet, the blend or the tablet is the better stability sample. Test hardness, disintegration, moisture and the calcium and phosphorus content of the finished unit. A powder that passes its own stability panel can still fail in a tablet if the granulation or the coating step heats it, and the finished-product data is what supports the shelf life that goes on the pack. The protocol should state the pack, the fill mass, the closure and the orientation. A 1 kg foil pouch and a 25 kg drum with a liner are different barriers, and a result from one does not transfer to the other. ## The finished formula changes the answer In a direct-compression tablet the salt is part of the matrix, and its water is shared with the other ingredients. A moisture-sensitive active next to the dihydrate can pick up water that the dihydrate releases during drying or storage. An acidic active can dissolve part of the salt and change the local pH. A carbonate can raise the pH and precipitate phosphate. An iron salt can bind the phosphate and change the colour and the dissolution of the iron. An effervescent or a stick formula is the most demanding case, because the salt meets water and acid at the same time. The acid reaction is intended, but the rate and the residue are not: a coarse grade dissolves slowly and leaves grit, while a fine grade reacts quickly and can foam before the consumer opens the sachet. The grade and the particle size belong in the formula trial, not only in the purchase order. None of these interactions is a reason to avoid the salt. They are reasons to test the finished formula, and to write the hydrate and the particle size into the specification so that a later change of grade is visible. ## How the shelf life is set The catalog does not assign a shelf life to the powder; the shelf life is set per pack from the stability data and the storage condition. A foil pouch that stays sealed and dry supports a longer retest interval than a drum that is opened in a humid warehouse every week. The label should state the storage condition, the pack and the retest date, and the certificate should be tied to the lot code on that pack. For a customer who repacks, the clock does not restart. The powder is the same lot, and the moisture it has already met stays with it. The product page gives the catalog figures; the COA page shows where loss on drying sits on the certificate; the MOQ page covers the packs; the quality page covers the release and retest workflow; the methods index describes the tests. ### 04 Dicalcium phosphate MOQ, packs and lead time URL: https://nutrition.rainwoodbio.com/products/minerals/dicalcium-phosphate/moq/ Reviewed: 2026-11-19 The minimum order is one 1 kg foil pouch. Bulk material travels in a 25 kg fiber drum, and the standard anhydrous powder is quoted at 1–7 days; granulated grades are produced to order. A firm offer needs the hydrate, the calcium and phosphorus figures, the particle size, the quantity, the destination and the end use. In one lineThe 1 kg pouch is small enough for a trial and large enough to carry a lot code, a sample and a retained sample; the 25 kg drum is the pack that feeds production. ## Why one kilogram is the minimum A mineral is bought as a lot, so the pack sets the smallest order. One kilogram is the least material that can be given its own lot code, sampled for release and kept as a retained sample without splitting a larger pack. It is also about the amount a bench trial, a first tablet run and a stability point consume, which is what a new project needs before it commits to a production quantity. Below that mass the powder is usually divided from a bigger lot. The division adds handling, breaks the link to the original pack and leaves the buyer with material that cannot be traced to a certificate in the same way. The 25 kg drum is the production unit: one lot, one liner, one certificate, and a storage commitment that a 1 kg pouch does not carry. ## Packs and pack sizes Standard dicalcium phosphate packs | Pack | Net mass | Typical use | Note | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated | On request | Flow and dust control | Base hydrate and granulation declared The foil pouch is the better barrier for a small quantity, and the drum is the practical unit for a production floor. Both carry the product name, the hydrate, the CAS number, the net mass and the lot code. A change of liner, pouch gauge or drum size is a change of pack, and the moisture data for one pack does not automatically cover another. Granulation is a separate operation, not a packing choice. It changes the particle size and the flow, and it has its own lead time. The order should name the base hydrate and the granulation target, because a granulated dihydrate and a granulated anhydrous salt are different specifications. ## Lead time and shipping The standard powder is quoted at 1–7 days. That window covers picking, the documents and dispatch; it does not include transit, customs clearance or the customer's own quality release. A custom granulation, a non-standard particle cut or a special pack is scheduled outside the window and should be quoted with its own date. Ask for the dispatch date as well as the lead time. A 25 kg drum may move on a pallet while a 1 kg pouch may travel as a parcel, and the delivery term decides who books the freight and who clears the entry. The certificate, the specification and the safety data sheet should travel with the lot, not follow it. ## What the quotation has to settle Details that change a dicalcium phosphate offer | Detail | Why it matters | Hydrate and CAS number | Anhydrous and dihydrate carry different calcium and phosphorus per gram | Calcium and phosphorus figures | The catalog window is 29.0–30.0% and 22.0–23.5%; a tighter window needs a different lot | Particle size and form | Powder, granule, 40 mesh or a custom cut | Quantity and pack | 1 kg pouch, 25 kg drum or a granulated batch | Destination and end use | Supplement, food additive or excipient; the market sets the document list | Documentation | COA, SDS, specification version, third-party tests, certificates Six answers turn an enquiry into an offer. The most common gap is the hydrate: a buyer who asks for “dicalcium phosphate” without naming it can receive either salt, and the calcium figure on the label will be wrong by about a fifth. The second gap is the destination, because a supplement file and a food-additive file are not the same list. ## What a sample has to be A sample should be a pack drawn from a real lot, with a lot code and a certificate that matches it. A hand-filled bag without a lot code is a demonstration, and a trial run on it says nothing about the material that will arrive on the pallet. Ask for the sample mass, the lot code and the certificate before the trial starts. Keep part of the sample. If a later delivery is disputed, the retained sample and its certificate are the reference, and the comparison only works if the sample was stored in the same pack and the same condition as the delivery. The COA page sets out what the certificate should contain, and the quality page describes how the retained sample is kept. ## Terms to agree before the first order Agree the specification revision first. The order should reference a dated specification rather than a product name, so that a later change of hydrate, particle size or impurity limit follows the agreed procedure instead of appearing on a certificate. Agree the retest interval and the shelf life for the pack that will be supplied, with the storage condition that goes with them. Then agree the documents, the delivery term, the pack and the handling of a non-conforming lot. A lot that misses a release line should be replaced or credited under a procedure both sides have signed, and the retained sample should be available to both. Those points belong in the order, not in a conversation after the drum has been opened. The catalog figures are on the product page; the compliance page covers the market documents; the stability page covers the pack and the retest interval; the quality page covers release and retention. ### 05 The regulatory file for dicalcium phosphate URL: https://nutrition.rainwoodbio.com/products/minerals/dicalcium-phosphate/compliance/ Reviewed: 2026-11-19 Dicalcium phosphate reaches a market by one of three routes: a calcium source in a food supplement, a food additive with a technical function, or an excipient in a medicinal product. Each route has its own instrument, its own limits and its own label rules. The buyer's regulatory team confirms which route applies to the destination; this page sets out the frameworks, the limits and the documents the file needs. In one lineThe specification describes the powder; the regulatory file shows which route it takes, which limits apply and what the label may say in the destination market. ## Three routes, one specification The same drum can be a nutrient, an additive or an excipient, and the legal basis changes with the use. A calcium source in a supplement is regulated as a nutrient source in most markets. A technical use, such as an anti-caking or buffering function in a food, is an additive use. An excipient use in a tablet is regulated through the medicinal-product framework of the destination. The specification and the certificate are common to all three; the route determines which extra documents and which limits apply. Do not let the route be inferred from the product name. The route is a decision for the buyer's regulatory team, and the supplier's job is to give that team the material data it needs. ## European Union As a food additive, dicalcium phosphate is E 341(ii), calcium hydrogen phosphate. The additive framework is Regulation (EC) No 1333/2008, which sets the permitted uses and conditions, and the specification is Commission Regulation (EU) No 231/2012. The additive specification sets the assay at 98–102% of CaHPO₄ after drying at 200 °C for three hours, which is the same window as this catalog but a different drying basis from the routine loss on drying. The specification also sets limits for fluoride, arsenic, lead and mercury; check the current consolidated text, because the annexes are amended. As a nutrient source in a food supplement, the material falls under Directive 2002/46/EC, which lists the permitted vitamin and mineral sources in its Annex I, and under the general food law of Regulation (EC) No 178/2002. Labelling follows Regulation (EU) No 1169/2011, whose Annex XIII gives reference values of 800 mg for calcium and 700 mg for phosphorus per day. Contaminants are governed by Regulation (EU) 2023/915, which replaced the older contaminant regulation; the limits that apply depend on the food category and on the additive or nutrient use. The additive route and the nutrient route are not interchangeable. A material that meets the additive specification is not automatically the permitted source for a supplement, and the reverse is also true. The buyer's team confirms the route and the entry before the label is drafted. ## United States In the US, calcium phosphate, including the dibasic form, is listed as generally recognized as safe for use in food under 21 CFR 182.1217 when used in accordance with good manufacturing practice. That listing covers the mono-, di- and tribasic forms together, so the ingredient statement still has to name the salt and the hydrate. A dietary supplement uses the DSHEA framework, with the labelling rules in 21 CFR 101.36 and the nutrition labelling rules in 21 CFR 101.9. The United States Pharmacopeia has a monograph for anhydrous dibasic calcium phosphate, with an assay of 98.0–103.0% and its own identification, fluoride and loss-on-ignition tests. The catalog window here is narrower at the top, at 98.0–102.0%. A customer who needs the pharmacopeial monograph should say so, because the release tests and the reference standards are not identical to the food-grade panel. Structure or function statements are made for the finished product, not for the ingredient, and they carry their own notification and substantiation rules under 21 CFR 101.93. ## Contaminants and limits The catalog panel sets Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg, with the microbiological counts on the specification. Those figures are the buyer's starting point, not a statement that they satisfy every market. The destination may set a lower lead limit, a fluoride limit or an additional element, and the additive specification may set its own numbers. Fluoride deserves its own line. Dicalcium phosphate is made from phosphate rock, and fluoride travels with the phosphate unless the process removes it. The catalog does not list fluoride, so a customer whose market sets a fluoride limit has to ask for the determination and for the result on the lot. Microbiology is a process-control result. A mineral powder is not a sterile product, and the specification sets counts and absence tests rather than a sterility claim. ## What the label may say The ingredient page makes no disease claim, and the finished product cannot borrow one from the material. Calcium and phosphorus are nutrients with reference values, so a content claim is a labelling question: the nutrient panel declares elemental calcium, and a claim such as “source of calcium” or “high in calcium” depends on the claim rules of the market and on the amount in the daily portion. The salt name and the elemental figure are separate statements, and both have to be correct. A phosphorus figure is part of the same arithmetic. A product that declares calcium from dicalcium phosphate also supplies phosphorus at about 0.77 times the calcium mass, and that figure belongs in the nutrient panel where the market requires it. A label that declares the calcium but hides the phosphorus is incomplete for a reviewer who adds the two together. ## Documents the file needs Documents for a dicalcium phosphate regulatory file | Document | What it shows | Specification, dated | Hydrate, assay, calcium, phosphorus, LOD, impurities, particle size | Certificate of analysis | The lot result against that specification | Safety data sheet | Handling, dust, transport classification | Manufacturing flow chart | Source, reaction, drying, milling and packing steps | Contaminant and microbiological reports | Heavy metals, fluoride where required, counts and absence | Allergen and GMO statements | Absence declarations for the destination | Certification and audit documents | Quality system, site audit, chain of custody | Label and use declaration | Ingredient name, hydrate, function and route The list is a starting point. A medicinal excipient route adds the pharmacopeial monograph and the excipient documentation; a food-additive route adds the additive specification and the use justification. This page cannot replace the destination counsel, and it is not meant to. ## Checklist before the first order - Name the route: supplement nutrient, food additive or excipient. - Name the market and the instrument that applies, with the current text checked. - Confirm the hydrate and the CAS number on the specification and the label. - Confirm the contaminant limits, including fluoride if the market sets one. - Confirm the label name, the elemental calcium figure and the phosphorus declaration. - Confirm the documents, the language and the legalisation the destination needs. - Record the specification version and put the hydrate, the particle size and the source under change control. The product page carries the catalog figures; the grade page covers the hydrate; the COA page covers the certificate; the calcium carbonate page and the calcium citrate page show how the other calcium salts are filed; the quality page covers the release workflow. ### 06 How to prove a lot is dicalcium phosphate URL: https://nutrition.rainwoodbio.com/products/minerals/dicalcium-phosphate/identity/ Reviewed: 2026-11-19 Dicalcium phosphate is identified by agreement between four results: the document, the calcium titration, the phosphorus determination and the diffraction pattern. The document names CaHPO₄ and the hydrate; the titration gives calcium; the spectrophotometric method gives phosphorus; the diffractogram shows monetite or brushite. Calcium alone cannot separate dicalcium phosphate from calcium sulfate, which carries about the same calcium percentage. The phosphorus figure and the ratio close that gap. In one lineCalcium proves the element, phosphorus proves the anion, and the ratio plus the diffraction pattern proves which calcium phosphate, and which hydrate, the lot is. ## Four layers, four questions A certificate can carry the right name and still leave the material unproven. The layers below ask separate questions, and each needs its own evidence. An answer to the first alone describes the paperwork, not the powder. Four layers of dicalcium phosphate identity | Layer | Question | Test | What it proves | Document | Are the formula, CAS number and hydrate named? | Specification and label | Paperwork only | Calcium | Is the calcium figure right? | Complexometric titration with EDTA | The element, not the salt | Phosphorus | Is the anion phosphate? | Spectrophotometry after acid digestion | The phosphate anion | Ratio | Is the calcium-to-phosphorus balance that of CaHPO₄? | Calculation from the two results | Which calcium phosphate | Solid state | Which hydrate and crystal form are present? | X-ray diffraction | Monetite, brushite or a second phase Acid-insoluble matter is a useful negative check beside these: it measures what the acid did not dissolve, and a high residue points to silica, a silicate or a dirty source. It does not identify the salt, but it caps how much of the powder can be something else. ## The calcium-to-phosphorus ratio Pure CaHPO₄ is 29.46% calcium and 22.76% phosphorus, a mass ratio of 1.29 to one. The ratio is the most portable identity check because it needs only the two results the certificate already carries. A lot at 29.5% calcium and 22.4% phosphorus has a phosphorus-to-calcium ratio of 0.759 against the theoretical 0.773, which is within the normal spread. A lot at 29.5% calcium and 15.2% phosphorus has a ratio of 0.515, which is the ratio of tricalcium phosphate, and the certificate has described a blend rather than the ordered salt. The ratio distinguishes the salt, not the hydrate. Anhydrous dicalcium phosphate and the dihydrate have the same 1.29 ratio, because the water of crystallisation adds mass to both the calcium and the phosphorus denominator without changing their proportion. The hydrate needs the loss on drying or the diffraction pattern; the ratio cannot answer that question. Two common substitutes sit outside the ratio window. Calcium sulfate carries about 29.4% calcium and no phosphorus, so a calcium-only specification passes it. Calcium carbonate carries about 40% calcium and no phosphorus, so it fails on both figures and shows an acid effervescence. Monocalcium phosphate carries about 17% calcium and 26.5% phosphorus, a phosphorus-to-calcium ratio of 1.55, going the other way. Each of those is visible in the pair of figures, and none of them is visible in the calcium figure alone. ## X-ray diffraction and the hydrate Dicalcium phosphate crystallises as monetite in the anhydrous form and as brushite in the dihydrate. Monetite and brushite scatter X-rays differently, so a scan can name the hydrate and show whether a second crystalline phase is present. Tricalcium phosphate gives a different pattern again, usually described as whitlockite or an apatitic phase depending on the preparation, so the same scan can separate the two salts. Diffraction answers a question about the solid, not about purity. It can show monetite where brushite was expected, or a tricalcium phosphate phase above the detection limit. It cannot quantify an amorphous fraction, and it cannot see a substitution that leaves the crystal structure unchanged. Before accepting a “match” statement, ask for the reference pattern, the scan range and the detection limit. The hydrate matters commercially because the calcium and phosphorus per gram depend on it. A lot sold as anhydrous at 29.46% calcium is the anhydrous salt; the same powder after taking up two waters of crystallisation reads about 23.29% calcium. The diffraction pattern and the loss on drying are the two independent ways to see that change. ## Where the substitutes show up Substitutions and the signals that expose them | Substitute | What it does | Signal | Test | Calcium sulfate | Matches the calcium figure; adds no phosphorus | Phosphorus near zero; sulfate test positive | Phosphorus, sulfate test, XRD | Calcium carbonate | Raises calcium; adds no phosphorus | Effervescence in acid; carbonate present | Acid reaction, phosphorus, XRD | Tricalcium phosphate | Raises calcium; lowers the ratio | Calcium high, phosphorus ratio near 0.52 | Ratio, XRD | Monocalcium phosphate | Lowers calcium; raises the ratio | Acidic solution; phosphorus high against calcium | Ratio, pH, XRD | Silica or silicate | Dilutes both figures; adds residue | Acid-insoluble matter high | Acid-insoluble matter, XRD | Feed-grade material | Same chemistry, different contaminant panel | Fluoride or heavy metals outside the food limit | Fluoride, ICP-MS, documentation Colour tells you least. Both hydrates are white, and an off-white tone usually reflects the lime source or the drying step. The phosphorus figure, the ratio, the acid-insoluble residue and the diffraction pattern carry the evidence. A certificate with calcium and assay but no phosphorus has not tested the substitution that matters most. ## Identity clauses for the specification - “Dicalcium phosphate, anhydrous, CAS 7757-93-9, CaHPO₄; hydrate declared.” - “Assay 98.0–102.0% as CaHPO₄; calcium 29.0–30.0%; phosphorus 22.0–23.5%.” - “Identification by infrared and by the calcium and phosphate reactions.” - “Calcium-to-phosphorus ratio calculated from the two results and reported with them.” - “Loss on drying ≤2.0%; X-ray diffraction when the hydrate or a second phase is in question.” - “No calcium sulfate, calcium carbonate, tricalcium phosphate, monocalcium phosphate or silica added.” - “Hydrate and crystal form under change control; lot code on the pack and the certificate.” The exclusion clause carries as much weight as the positive lines. Without an exclusion for sulfate and carbonate, a blend can sit inside the calcium window; the clause gives the laboratory a line to test. ## Five questions to put to the supplier - Is this lot the anhydrous salt or the dihydrate, and what water figure does the certificate report? - What are the calcium and phosphorus results, and were both measured on the same lot and basis? - What is the calculated calcium-to-phosphorus ratio, and does it match CaHPO₄? - Which phase does X-ray diffraction show, and against which reference pattern? - What is the fluoride figure, and will you re-test the retained sample jointly if a result is disputed? Those five answers build an identity file; a calcium percentage on its own does not. The product hub carries the catalog specification; the COA page shows which certificate line carries each figure; the grade page compares the hydrates; the dicalcium versus tricalcium page takes the ratio arithmetic further; the calcium carbonate page describes the carbonate that would show up as a phosphorus gap; the methods index explains the tests. ### 01 What the COA for potassium citrate monohydrate actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/potassium-citrate/coa/ Reviewed: 2026-11-19 Every lot of potassium citrate monohydrate ships with a certificate reporting appearance, identification, assay by titration, elemental potassium, water by Karl Fischer, pH, heavy metals, microbiology and particle size. The assay measures the citrate salt; the potassium and water lines decide whether that salt is the monohydrate. Each line needs a method and a release limit beside the result, because a certificate of conclusions cannot be audited. In one lineThe assay says how much citrate salt is present, the potassium figure says how much of the element it carries, and the water says which hydrate was weighed; the three lines only mean something together. ## The certificate as a test report A release certificate is written against a specification, so each row has three parts: the parameter, the method that produced the number, and the limit the lot was released against. A result without a method cannot be repeated by a second laboratory; a limit without a result is a promise rather than a measurement. Batch COA · potassium citrate monohydrate | Parameter | Method | Release limit | Appearance | Visual | White crystalline powder | Identification | Infrared spectrum and citrate reaction | Conforms to reference | Assay (citrate) | Perchloric acid titration | 99.0–100.5% | Potassium (K) | Flame photometry or ICP-OES | 35.0–37.0% | Water | Karl Fischer | 5.0–6.5% | pH (5% solution) | Potentiometry | Typically 7.0–9.0; range agreed | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh The identification row is a yes-or-no gate and should name the reference; the assay and potassium rows are numbers that answer different questions. ## The assay basis, the potassium figure and the water The assay is an acid–base titration of the citrate, quoted at 99.0–100.5%. The certificate has to print the basis in the same row: on the dried basis the crystal water is excluded from the denominator; as-is it is included. The same powder reads higher on the dried basis, and the gap is roughly the water figure, so two certificates must be converted to one basis before they are compared. The molar arithmetic gives the check. Potassium citrate monohydrate is C6H5K3O7·H2O, molar mass 324.41. Three potassium atoms contribute 117.29, or 36.16% of the molecule; one water molecule contributes 18.02, or 5.55%. The catalogue brackets both: K 35.0–37.0% and water 5.0–6.5%. An anhydrous lot would sit near 38.3% K with water below 1%, and that is a different grade, not a better one. The potassium line is elemental. Flame photometry and ICP-OES both measure the metal after the sample is dissolved, and neither one sees the citrate. That is why the potassium figure cannot replace the assay, and why the assay cannot prove the hydrate. Water by Karl Fischer measures total water, including the water built into the crystal. Loss on drying at 180 °C drives off the same water, so the two methods can agree; Karl Fischer is the clearer statement because it does not depend on how the sample was heated. The pH line is a process signal: a 5% solution is alkaline, typically 7.0–9.0, and it moves with residual acid or alkali. ## Release limit versus batch result The release limit is the acceptance boundary; the batch result is what the laboratory measured. Both belong on the page, in separate columns, with the method beside them. A result column filled with the specification range is not a result. What the result column should contain | Parameter | Release limit | Result column | Assay | 99.0–100.5%, with basis | A measured percentage and the basis | Potassium | 35.0–37.0% | A measured percentage and the method | Water | 5.0–6.5% | A measured percentage by Karl Fischer | Heavy metals | Per element | One figure per element, in mg/kg | Microbiology | Counts and absence | The count and the absence statement for the lot “Conforms” is acceptable for identification and for the absence tests, provided the reference and the method are named. It is not acceptable for assay, potassium or water, where a number is the evidence. A certificate that reports a single “heavy metals” total has hidden the element that matters. ## What moves between batches The salt is made by neutralising citric acid with a potassium source, then crystallising and drying it. Potassium and water move together with the drying step: a lot dried too far loses crystal water and reads high in potassium with low water, while a wet lot reads low in potassium with high water. Both can sit inside a wide specification and still behave differently at the fill line. The assay follows the purity of the crystallised salt and the amount of mother liquor left in it. The pH follows the same washing step and the ratio of acid to alkali. Particle size follows the mill and the sieve, and it can change without any change in the chemistry. Colour is the least quantitative line. A white powder can take a grey or yellow tint from iron pickup in the dryer or a longer hold in the centrifuge while assay and potassium pass. A tint is a reason to read the batch record, not to reject on appearance alone. Chloride is not on the catalogue sheet, but a potassium raw material can carry it; where potassium chloride is the concern, ask for chloride by ion chromatography on the same lot. The identity page shows where that result fits. ## When to order an outside test Order an independent test for a new source, a first regulated-market shipment, a label that names the monohydrate, or a dispute. The useful panel is not a full repeat of the certificate: infrared identity and a citrate reaction, potassium by ICP-OES, water by Karl Fischer, chloride by ion chromatography, ICP-MS and a microbiology count. Add X-ray diffraction if the solid form is disputed: the monohydrate and the anhydrous salt have different patterns, and potassium chloride has a third. Ask the laboratory to report its detection limit for each screen; a “not detected” line without a limit says more about the method than about the sample. Keep the chain of custody. The sample tested should be the retained sample, and the report should name the lot. When a result is contested, send the retained sample, the supplier's certificate and the specification, and ask for the tests that separate the forms rather than a repeat of the same assay. ## What to compare between suppliers Put six lines side by side: the salt and its hydrate, the assay range and basis, potassium and water, pH, particle size and bulk density, and the contaminant panel. Two quotations that agree on assay but differ on hydrate or basis are not describing the same powder. The second layer is traceability: the certificate lot number, the pack label and the retained sample should carry one identifier. The catalogue line sits on the potassium citrate product page; the hydrate choice is on the grade page; the tests that separate the salt from a blend are on the identity page; the potassium method is described in the ICP-OES note; the release workflow is on the quality page. ### 02 Potassium citrate monohydrate: choosing a grade and a mesh URL: https://nutrition.rainwoodbio.com/products/minerals/potassium-citrate/grades/ Reviewed: 2026-11-19 The catalogue grade is potassium citrate monohydrate, a 40 mesh powder carrying 35.0–37.0% potassium and 5.0–6.5% water. An anhydrous grade exists, and granulated or finer-milled variants are quoted on request; the hydrate and the particle size are separate specification decisions. The monohydrate is not a diluted anhydrous salt, because the water is built into the crystal. In one lineGrade means the hydrate and the particle size: the monohydrate carries 5.5% crystal water and 36.2% potassium, the anhydrous salt 38.3%, and the mesh decides how the powder flows. ## The hydrate is part of the identity Water of crystallisation is part of the lattice, not surface moisture that a dryer can remove at will. Potassium citrate monohydrate is C6H5K3O7·H2O at 324.41 g/mol; the anhydrous salt is the same formula without the water at 306.40. The monohydrate is the commercial grade because the hydrate is defined, it dissolves freely, and it is less eager to take up water than the anhydrous form. A purchase order that says “potassium citrate” has named a family, not a drum. The hydrate changes the potassium per gram, the mass per serving and the water figure on the certificate. The particle size is the second decision: a 40 mesh powder, a granulation and an 80 mesh mill are process variants of the same salt, but they flow, dust and fill differently. ## The grades side by side Potassium citrate grades · what changes between them | Grade | Water | Potassium | Typical use | Watch | Monohydrate, 40 mesh | 5.0–6.5% | 35.0–37.0% | Capsules, tablets, sticks | Hygroscopic; caking if opened | Anhydrous | Below 1% | About 38.3% | Fill-limited dry formulas | More hygroscopic; different solid form | Granulated monohydrate | As the monohydrate | As the monohydrate | Tablets, sachets | Flow aids must be declared | Fine mill, 80 mesh | As the monohydrate | As the monohydrate | Suspensions, small capsules | Dust and segregation The anhydrous grade is not a concentrate in the marketing sense; it is the same salt without the crystal water. Its potassium is higher per gram, its water is lower, and its powder is more hygroscopic. ## Solubility, pH and handling Potassium citrate is freely soluble: about 140 g dissolves in 100 mL of water at room temperature, and a 5% solution is alkaline, typically pH 7.0–9.0. The salt is hygroscopic and can cake or deliquesce in humid air, so the pack and the store matter as much as the mesh. Bulk density and flow are lot-specific, and the number that matters is the one on the certificate for the lot being bought. A granulated grade is chosen for flow and low dust, not for a higher potassium figure; granulation aids, if used, have to be declared. A fine mill dissolves faster but can dust and segregate in a blend. The crystal water is not a coating. It is 5.5% of the mass, and it is the reason the monohydrate and the anhydrous salt need separate specifications, separate fill weights and, strictly, separate labels. ## What changes in the finished product The potassium figure drives the fill. At 36.16% potassium, 500 mg of elemental potassium needs 1,383 mg of the monohydrate; 99 mg needs 274 mg. The anhydrous salt at 38.28% needs 1,306 mg and 259 mg for the same doses. A 500 mg capsule holds about 181 mg of potassium from the monohydrate, so a high-potassium claim and a small capsule are not compatible. In a stick pack or a drink mix, the monohydrate is the practical grade: it dissolves freely and the citrate note is part of the taste. In a tablet, the granulated grade flows and compresses; in a capsule, the 40 mesh powder is the default. The water in the monohydrate is not a filler and should not be treated as one; it is part of the ingredient identity and the fill arithmetic. The label follows the hydrate. In the European Union the ingredient list names the potassium source in the form the destination requires, and the nutrition declaration reports elemental potassium in milligrams and as a share of the reference intake. A change from monohydrate to anhydrous at a fixed powder weight moves the declared potassium by about 6%, which is a new label and a new fill trial, not a note in the batch file. ## How to write the specification - “Potassium citrate monohydrate, C6H5K3O7·H2O, CAS 6100-05-6.” - “Assay 99.0–100.5% by titration; state the basis.” - “Potassium 35.0–37.0%; water 5.0–6.5% by Karl Fischer.” - “pH of a 5% solution typically 7.0–9.0; ≥95% through 40 mesh.” - “No added potassium chloride or sodium citrate.” For the anhydrous grade, replace the hydrate name, the water limit and the potassium range with that grade's own figures. A specification copied from the monohydrate and applied to the anhydrous salt will fail every lot, and the supplier will be right. ## When not to switch Do not switch hydrate or mesh without a change control. The label, the fill weight, the stability file and the approved specification all belong to the grade that was qualified; a new hydrate is a new material even when the assay is identical. Do not choose the anhydrous grade only because the potassium figure looks higher. The gain is about 6% more potassium per gram, and it comes with a more hygroscopic powder and a different solid form; if the capsule has room and the label is already set, the switch buys little. The product hub carries the catalogue specification; the chloride comparison takes the salt choice further; the potassium gluconate page shows how a lower potassium figure changes the fill; the magnesium citrate page applies the same citrate arithmetic to a divalent metal; the COA page shows where the hydrate is declared on the certificate. ### 02.1 Potassium citrate vs potassium chloride: potassium, taste and acid load URL: https://nutrition.rainwoodbio.com/products/minerals/potassium-citrate/grades/potassium-citrate-vs-chloride/ Reviewed: 2026-11-19 Potassium citrate monohydrate carries 35.0–37.0% potassium; potassium chloride carries about 52.4%. For the same potassium dose the citrate mass is about 1.45 times the chloride mass, so the capsule, tablet or stick pack has to carry more powder. The rest of the decision is taste, acid load, fill weight and the label. In one linePotassium citrate carries about 36% potassium against 52% for potassium chloride, so the same dose takes more citrate, and the choice turns on taste, acid load and fill weight rather than purity. ## Potassium per gram: the arithmetic Both salts deliver the same element from a different mass. The monohydrate has a molar mass of 324.41 and three potassium atoms, so it is 36.16% potassium; the anhydrous salt is 38.28%; potassium chloride has one potassium in 74.55 g, or 52.45%. The label dose is written in elemental potassium, so the weigh-up has to start from those figures rather than from the salt weight. Potassium salts compared at equal elemental dose | Salt | Formula | Potassium | Mass for 500 mg K | Solubility in water | Potassium citrate monohydrate | C6H5K3O7·H2O | 36.16% | 1,383 mg | About 140 g/100 mL | Potassium citrate, anhydrous | C6H5K3O7 | 38.28% | 1,306 mg | About 140 g/100 mL | Potassium chloride | KCl | 52.45% | 953 mg | About 34 g/100 mL For a 99 mg potassium serving the same arithmetic gives 274 mg of the monohydrate, 259 mg of the anhydrous salt and 189 mg of the chloride. A formulation that switches salt without recalculating the fill will miss the label claim by about 45% upward or 31% downward. ## Taste: salty-bitter against saline-sour Potassium chloride tastes salty, with a bitter, metallic note that grows as the dose rises. It is the salt in many low-sodium salt substitutes, where the note is accepted because the serving is small and the food is savoury. Potassium citrate tastes saline rather than bitter, and it buffers the mix; in a fruit-flavoured stick pack the citrate note can be carried by the acid profile, while the chloride note is harder to mask. Taste is a formulation result, not a certificate line. A supplier can describe the salt, but only a trial in the real matrix says whether the note is acceptable. The citrate is the easier starting point for a beverage, and the chloride is easier to justify in a small tablet where taste is irrelevant. ## Acid load: a formulation property Citrate is the salt of a weak acid and a strong base. In normal metabolism the citrate anion is oxidised and generates bicarbonate, so the salt has an alkalising potential; chloride does not. That is why the two salts are not interchangeable in a formula where the acid–base balance of the finished product matters. The difference is a formulation property, not a health claim. No urinary, renal or therapeutic effect is asserted on this page. If a brand wants to say anything about the acid load, the wording must be checked against the authorised claims for the market and the dose. The food itself also matters. A citrate salt can buffer an acidic drink and shift its pH; a chloride salt does not. That shift changes taste, colour and preservative performance, so the switch is a reformulation, not a swap. ## Fill weight, capsule size and solubility The fill follows the potassium figure. A 99 mg potassium serving needs 274 mg of the monohydrate or 189 mg of the chloride; a 500 mg serving needs 1,383 mg or 953 mg. The citrate is 45% more powder for the same potassium, and that difference decides whether the dose fits a capsule, a tablet or a stick. Solubility is the second fill question. The citrate dissolves freely, about 140 g per 100 mL, and the chloride is far less soluble at about 34 g per 100 mL. A concentrated drink mix can carry the citrate; the chloride may reach its solubility limit and leave a salty sediment. Bulk density and flow are lot-specific, so the capsule or die trial decides the final fill. Do not size the package from the potassium figure alone; size it from the mass of salt plus the excipients and the density of the lot. ## What the label has to name The label names the salt, not only the element. In the EU the additive entries are E 332 for potassium citrate and E 508 for potassium chloride; the supplement route uses the names from the mineral list. In the US the Supplement Facts panel names the ingredient and declares potassium against the 4,700 mg Daily Value. The two salts also carry different potassium figures per gram, so a label built on one cannot be moved to the other without recalculating the serving. A claim that a product “contains potassium” says nothing about which salt; the ingredient list does. ## When to choose which Choose the citrate when the formula is aqueous, when the taste has to be mild, when chloride is unwanted, or when the acid load is part of the design. It is the form in this catalogue and the one used in sticks, drink mixes and buffered systems. Choose the chloride when the dose has to be small, when a tablet is the format, or when the salty note is wanted. It is not a drop-in for the citrate: the mass changes, the taste changes and the label changes. Both salts need the route confirmed for the destination. The product hub carries the citrate specification; the potassium gluconate page shows how a lower potassium figure changes the fill; the magnesium citrate page applies the citrate arithmetic to a divalent metal; the methods index covers the potassium assay; the quality page covers the release file. ### 03 Potassium citrate stability: the seal, the pH and the pack URL: https://nutrition.rainwoodbio.com/products/minerals/potassium-citrate/stability/ Reviewed: 2026-11-19 Potassium citrate monohydrate is a stable solid when it is kept sealed and dry at ambient temperature. The 5.0–6.5% water on the certificate is mostly crystal water, not free moisture, and it does not leave a closed pack. The solution is alkaline and absorbs carbon dioxide from the air, so a liquid format has a shorter hold and needs its own validation. In one lineThe monohydrate is stable while the seal holds; moisture, carbon dioxide and heat are what move it, and the pack decides how fast. ## The powder: crystal water and humidity The water line is the hydrate, not the weather. Karl Fischer measures total water, and for a monohydrate the result sits near the theoretical 5.55%. Loss on drying at 180 °C drives off crystal water; a result in the same range is consistent, and a result far below it points to an anhydrous or over-dried lot rather than to a dry store. The powder is hygroscopic. An opened pouch in a humid room takes up water, cakes and can deliquesce; the water figure rises and the powder stops flowing. Keep the foil pouch sealed, keep the drum liner closed, and store below 25 °C at a controlled humidity. A desiccant helps only while the seal is intact. Temperature alone is the lesser risk for the solid. A sealed pouch at ambient warehouse temperature is not the same exposure as an opened liner in a hot, humid loading bay, and the difference is shown by water and flow before it is shown by assay. ## The solution: pH, carbon dioxide and microbes The salt dissolves freely, about 140 g per 100 mL of water, and the solution is alkaline. In an open tank it absorbs carbon dioxide, the pH falls and carbonate appears; the pH is therefore a hold-time measurement, not only a release test. A sealed, headspace-controlled tank slows the change but does not stop it. Citrate is not a preservative. An unpreserved aqueous solution supports microbial growth, and a hot-fill or sterile step is a process decision with its own validation. Heat is not a major degradation route for the citrate ion in a normal process, but a long hold at high temperature still needs a measured hold time and a measured pH drift. Dilution changes the picture again. A concentrated stock has a high pH and a low water activity; a ready-to-drink dilution has more free water and is more hospitable to microbes. The stability work belongs to the concentration that will be sold, not only to the stock. ## What drives change Factors that move potassium citrate during storage | Factor | What it does | Control | Moisture | Raises water; caking and deliquescence | Sealed foil pouch; closed liner; dry store | Carbon dioxide | Lowers solution pH; forms carbonate | Sealed tank; controlled headspace; hold-time limit | Heat | Accelerates moisture and CO2 effects | Cool store; validated process hold | Light | Minor for the solid; can affect a coloured drink | Opaque pack for the finished formula | Metal ions | Colour and haze in solution | Avoid iron and copper contact | Microbes | Growth in an unpreserved solution | Preservation or sterile fill; micro testing These factors interact. A warm, open tank combines CO2 pickup, evaporation and microbial risk, and the pH moves while the assay is still inside its range. The useful question is not whether potassium citrate is stable, but which pack, which matrix and which hold time it is stable in. ## A stability protocol for the ingredient Long-term storage at 25 °C/60% relative humidity, intermediate storage at 30 °C/65% and accelerated storage at 40 °C/75% cover the warehouse and stress the pack. Add a solution arm at the process pH and a light-exposure arm if the finished pack is clear. Test assay, potassium, water, pH, appearance and microbiology at each point. The protocol belongs to the pack. A 1 kg pouch and a 25 kg drum have different headspace and different opening histories, and a bulk result does not transfer to a repacked container. For a drink mix, repeat the work in the matrix and at the process heat load; the powder result is the starting point, not the answer. Report the individual results, not only a pass statement, and identify the pack and the lot family. A summary that hides the water or pH trend is not useful for setting a retest period. ## The finished formula changes the answer A capsule or tablet has low water activity, but the fill still picks up moisture through the shell and the excipients. Check water and appearance at release and after storage. An effervescent tablet combines the citrate with an acid and a carbonate; the citrate is part of the buffer, and the tablet's own moisture limit is tighter than the raw material's. A drink mix or a liquid combines pH, CO2 and microbial risk. The formulator decides whether an overage is needed; that is a label and stability decision, not a repair for a pack that lets moisture in. A clear bottle on a warm shelf is the worst case for a coloured drink, and it should be part of the test design. ## How the shelf life is set We do not publish one shelf-life number for potassium citrate, because the pack and the storage condition set it. The assigned retest period belongs on the specification and is supported by data for that pack. A number without a pack, a condition and a test panel is a claim, not a shelf life. After the retest period, re-assay the retained sample before extending use. Do not extend by assumption and do not carry a bulk figure to a repack. The product hub lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the methods index explains the water and potassium assays; the quality page describes the release workflow. ### 04 Potassium citrate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/potassium-citrate/moq/ Reviewed: 2026-11-19 Potassium citrate monohydrate is supplied from 1 kg in a foil pouch; the standard bulk pack is a 25 kg fiber drum, and lead time is 1–7 days for the 40 mesh powder. A firm quotation needs the hydrate, the assay basis, the quantity and pack, the destination and Incoterm, the documents and the intended market. In one lineThe minimum is one kilogram because that is the smallest pack that carries a lot code, a retained sample and enough material for a bench trial. ## Why the minimum is 1 kg One kilogram is enough for a bench trial, a retained sample and an independent identity test, and it is small enough to ship as a parcel before the production plan is fixed. The pack carries a lot code and a certificate, which a scoop from a bulk drum cannot. Below 1 kg the material is usually split from a larger lot and repacked. That adds handling, loses the original pack identity and makes traceability harder without changing the chemistry. The 25 kg drum is the bulk unit: it reduces handling per kilogram, but it commits inventory and a longer storage period. The minimum is a pack decision, not a volume incentive. ## Packs and formats Standard potassium citrate packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated monohydrate | On request | Tablets, sachets | Flow and dust change; aids must be declared | Custom mesh | On request | Blends and capsules | Particle-size line moves with the mesh Granulation and a finer mesh are different specifications, not packing choices. If the dosage form needs a coarser or freer-flowing powder, say so before the quotation, because the change moves the particle-size line and may move the lead time. ## Lead time and dispatch The standard pack is quoted at 1–7 days from order confirmation. That window covers picking, document preparation and dispatch; it does not include transit, customs clearance or the customer's own quality release. A custom mesh, a granulation or a non-standard pack adds time, and the quotation should state it separately. Ask for the dispatch date when the potassium citrate monohydrate order is confirmed. The pouch can travel by parcel post and the drum on a pallet, with the agreed Incoterm placing booking and entry clearance on one side or the other. File the COA, specification and SDS under the same lot code, and show the potassium and water figures the receiving team will check. A granulated or custom-mesh lot may take longer, so confirm that slot separately. ## What a quotation needs Six items make a quotation firm enough to compare: - Product and hydrate. Potassium citrate monohydrate, CAS 6100-05-6, with the hydrate written out. - Specification. Assay and basis, potassium, water, pH, mesh and the contaminant panel. - Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated or custom-mesh variant. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, specification, SDS, and any market-specific statement the importer needs. - Intended use and market. Supplement, food or another use, and the market where it will be sold. A quotation without the market and the hydrate is incomplete. The same powder can suit one destination and sit outside the file for another, and the paperwork is part of the offer. Commercial terms are stated on the quotation, not on this page. ## The sample is a lot, not a demonstration The 1 kg pack is the qualification sample. Test identity, assay, potassium, water and microbiology before scaling, and keep a retained sample from the same pack. The lot code on the sample, the COA and the quotation should match. A sample that cannot be traced to a lot is a demonstration, not a qualification. If the bench trial needs less, discuss it before ordering. A split from a bulk lot is a repack with its own traceability, not the catalogue pack, and it should be documented as such. Do not assume that a bench sample and the production drum will come from the same lot. ## Terms to settle before the first order The quotation sets the commercial terms, the Incoterm, the pack, the lead time and the documents. The quality terms belong beside them: the specification revision, the COA per lot, the retained sample, the retest period and the change-control route. A quality agreement is worth having before the first production order, not after the first dispute. Returns and replacements follow the quotation and the quality agreement. A lot that fails the agreed specification should be handled through the retained sample and a joint re-test, not through a photograph of the powder. Ask which laboratory is acceptable to both sides and who commissions the referee test. The product hub carries the catalogue specification; the COA page lists the release tests; the compliance page covers the market files; the MOQ glossary entry defines the term; the logistics page covers shipping and documents. ### 05 The regulatory file for potassium citrate URL: https://nutrition.rainwoodbio.com/products/minerals/potassium-citrate/compliance/ Reviewed: 2026-11-19 Potassium citrate can reach a market as a food-supplement ingredient or as a food additive, and the two routes carry different lists, limits and labels. The catalogue specification and the batch certificate describe the material; they do not decide the route. The buyer's regulatory team confirms the route for the destination, and this page lists the framework and the documents that file needs. In one lineThe specification describes the drum; the route, the limits and the label are decided by the destination, and the buyer's regulatory team confirms them. ## The four checks A complete file answers four questions: is the salt on the route the finished product uses, are the contaminants inside the ceiling at the real dose, does the label name the material the way the market requires, and is the claim one the market allows. The four are separate tests, and one certificate does not settle them. Potassium citrate sits on two different roads. As a food supplement it is a mineral source; as a food additive it is an acidity regulator and sequestrant. The lists, the maximum levels and the labelling rules differ between the roads, so the first decision is the route, not the specification. ## European Union The EU food-supplement route is built on Directive 2002/46/EC, whose Annex II lists the vitamin and mineral substances that supplements may use; whether this salt is on that list for the destination, and under what conditions, is confirmed against the current consolidated text. The additive route runs through Regulation (EC) No 1333/2008, where potassium citrate is E 332 and potassium chloride is E 508. The two entries are not interchangeable. Contaminants fall under Regulation (EU) 2023/915, which sets limits per kilogram of product as sold. Labelling follows Regulation (EU) No 1169/2011 and the supplement rules, and claims follow Regulation (EU) No 432/2012. Each is a separate instrument and each can change; check the current text as of this review. ## United States In the United States a dietary supplement is built on the DSHEA route, and the Supplement Facts panel declares elemental potassium against the 4,700 mg Daily Value for adults and children aged four and over. The ingredient list names the salt, not only the element. A food-additive use is a separate route with its own basis, and the buyer confirms that the basis covers the intended use. California Proposition 65 runs in parallel and is triggered by the daily dose rather than by the concentration alone. A lot inside a raw-material limit can still need a warning at a high daily intake. The Proposition 65 entry explains the exposure calculation. ## Contaminants and limits Contaminant limits · food supplements, by market, as of this review | Element | EU | US | UK | Lead | 3.0 mg/kg in the supplement as sold | No federal supplement limit; state rules apply | Retained limit; check current UK law | Cadmium | 1.0 mg/kg | No federal supplement limit | Retained limit | Mercury | 0.10 mg/kg | No federal supplement limit | Retained limit | Arsenic | No EU-wide figure; national rules vary | No federal supplement limit | Check current UK law This table is a starting point, not legal advice. The catalogue specification for this salt is Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg, which looks like the finished-product ceiling but applies to the powder. The salt's share of the serving decides whether that is enough: a capsule in which the salt is a fraction of the fill gives the other ingredients room to absorb the contribution, while a stick pack that is almost all salt has none. Potassium itself is not a contaminant. Maximum potassium per serving is not harmonised across the EU; member states and the finished-product route set limits, so the daily dose and the destination belong in the file before the label is written. In the US the Daily Value is the reference for the panel, not a maximum. ## Claims The EU authorises potassium claims in Regulation (EU) No 432/2012, and each one carries conditions. They speak of a contribution to normal function, never of a disease or an outcome. On the US side a structure/function statement belongs to the brand: it has to be truthful, substantiated and followed by the DSHEA disclaimer. No disease-related claim is made on this page. An alkalinity or urinary effect is not asserted here either; the citrate's acid load is discussed on the chloride comparison page as a formulation property, not as a claim. The claim belongs to the brand that prints it and to the market that authorises it. ## The document pack - Batch certificate covering assay, potassium, water, pH and the contaminant panel. - Specification and technical data sheet that name the salt and its hydrate. - A 16-section safety data sheet. - Allergen, GMO, origin and residual-solvent statements. - The basis for the supplement or additive route in the destination market, where the buyer needs it. - A third-party certificate, where the review or the destination calls for one. ## Before the first order - Is the exact salt, including the monohydrate, on the route the finished product uses in the destination market? - At the real dose, do the contaminant results still fit under the finished-product limit? - Does the nutrition declaration match the hydrate and the potassium figure on the certificate? - Is the claim one the market authorises, or a structure/function statement that carries the disclaimer? - Does the pack include the route basis for the destination and the current UK position? The product hub carries the catalogue specification; the potassium gluconate page shows a second potassium salt with a different potassium figure; the magnesium citrate page shows the same framework around a different mineral; the EU regulatory summary gathers the instruments; the quality page describes the release file. ### 06 How we prove a lot is potassium citrate monohydrate URL: https://nutrition.rainwoodbio.com/products/minerals/potassium-citrate/identity/ Reviewed: 2026-11-19 A lot is potassium citrate monohydrate when four lines agree: the document names the salt and its hydrate, the infrared spectrum and a citrate reaction match the reference, the potassium result sits near 36.2%, and the water result sits near 5.5%. The assay alone cannot separate the monohydrate from the anhydrous salt, from a blend with potassium chloride, or from a dilution. In one lineIdentity is four agreeing measurements: the document names the hydrate, the infrared spectrum and the citrate reaction name the salt, the potassium figure fits 36.2%, and the water closes the mass balance. ## The four identity layers A certificate can name the right material and still fail to prove it. The four layers below are separate questions, and each one needs its own evidence. A supplier who answers only the first has described the paperwork, not the powder. Four layers of potassium citrate identity | Layer | Question | Test | What it proves | Document | Are the salt and hydrate named? | Name, CAS number, formula | Paperwork only | Spectrum | Is the solid the citrate salt? | Infrared spectrum and citrate reaction | The salt, not the hydrate | Element | Is the potassium figure right? | Potassium by ICP-OES or flame photometry | The element, not the anion | Mass balance | Is it the monohydrate, and is it diluted? | Water by Karl Fischer; assay | The hydrate and consistency ## The potassium ratio: proving the element The monohydrate is 36.16% potassium by mass: three potassium atoms at 39.10 against a molar mass of 324.41. The anhydrous salt is 38.28% because the same three atoms sit on a lighter molecule, and potassium chloride is 52.45% because it carries one potassium per 74.55 g. A potassium result near 36% is consistent with the monohydrate; 38% points to the anhydrous grade, 52% to the chloride, and a low figure to a sodium salt or a dilution. Potassium by ICP-OES is the direct check. The method dissolves the salt and measures the element; it does not see the citrate. Pair it with water: the monohydrate carries 5.0–6.5%, the anhydrous salt below 1%, and a wet lot above 6.5%. The pair is stronger than either line alone. A chloride test is the third check. Potassium chloride is the most likely potassium salt to appear in a citrate lot, because it is a common potassium source and it raises the potassium figure. Silver nitrate gives a white precipitate with chloride, and ion chromatography gives a number. The catalogue does not include chloride, so ask for it when the source is new or the potassium figure is higher than the hydrate allows. The citrate side needs its own evidence. The infrared spectrum of a citrate salt carries carboxylate bands near 1600 and 1400 cm−1, and a citrate reaction with calcium ions gives a characteristic precipitate. Either test alone is weaker than the pair, and both are weaker than the pair plus the potassium and water figures. ## X-ray diffraction: the solid-state check X-ray diffraction answers the solid-state question. The monohydrate and the anhydrous salt have different powder patterns, so a lot sold as the monohydrate but showing the anhydrous pattern has been mislabelled or over-dried. Potassium chloride has a cubic pattern that is easy to recognise, and sodium citrate has its own. XRD is not a routine release test and it is not a purity assay. It sees crystalline phases above its detection limit and misses an amorphous dilution. Ask for the reference pattern and the detection limit before reading a “match” statement; a conformity with no pattern adds little. ## What adulteration looks like Common potassium citrate substitutions and the signals | Adulterant | What it does | Signal | Test | Potassium chloride | Raises potassium; no citrate | K high; chloride present | Chloride by IC, infrared, XRD | Sodium citrate | Lowers potassium; adds sodium | K low; sodium high | ICP-OES for K and Na | Anhydrous citrate | No crystal water; K high | Water below 5.0% | Karl Fischer, XRD | Citric acid | Lowers pH; dilutes the salt | pH low; K low | pH, titration, infrared | Water | Raises water; lowers the as-is assay | Water above 6.5% | Karl Fischer | Sugar or maltodextrin | Lowers assay and potassium | K low; infrared differs | Assay, infrared, optical rotation Colour is the weakest signal. A white powder can be tinted by iron pickup during drying, and a pure lot can be slightly off-white; the tint alone says nothing about substitution. The stronger signals are the potassium figure, the water figure, the chloride result and the infrared spectrum. ## How to write the identity into the specification - “Potassium citrate monohydrate, C6H5K3O7·H2O, CAS 6100-05-6.” - “Assay 99.0–100.5% by titration; state the basis.” - “Potassium 35.0–37.0% by ICP-OES; water 5.0–6.5% by Karl Fischer.” - “Identification by infrared spectrum and citrate reaction, against a named reference.” - “Chloride by ion chromatography, where the source or the potassium figure calls for it.” - “No added potassium chloride, sodium citrate or citric acid.” ## Five questions for the supplier - Which hydrate is this lot, and which CAS number is on the certificate? - Can you provide the infrared spectrum and the citrate identity result, not only the assay percentage? - What are the potassium and water results for this lot, and which methods produced them? - What is the chloride result, and was it measured on the same sample? - If the lot is disputed, will you accept a joint re-test on the retained sample? Five direct answers amount to an identity file. A single assay percentage does not. The product hub carries the catalogue specification; the COA page shows where each figure sits on the certificate; the grade page compares the hydrates; the chloride comparison covers the salt choice; the XRD method note explains the solid-state test. ### 01 What a potassium gluconate COA reports, and on what basis URL: https://nutrition.rainwoodbio.com/products/minerals/potassium-gluconate/coa/ Reviewed: 2026-11-19 Potassium gluconate arrives with two potency numbers, and they answer different questions. The assay measures the salt; the potassium line measures the element. A certificate that prints both, with the water result and the method beside them, lets a buyer set a fill weight without guessing. The limits below are the catalog specification, and the lot sheet is what turns them into a batch record. In one lineTwo numbers carry the certificate: the salt assay by titration and the potassium figure beside it, and neither is usable until the basis and the water result are stated. ## Reading the certificate row by row Three identity signals belong on the sheet: an infrared spectrum, a titration and the potassium figure. The first two establish the gluconate; the third establishes the cation. A certificate that lists only “identity: conforms” has compressed three answers into one word. The potency pair is what buyers read first, but the water line is what makes the pair usable. Potassium gluconate is anhydrous and the water limit is 1.0%, so a lot near the limit can lose a full point of as-received assay before anything else changes. The table sets out the gate. Identity, assay, water and contaminants · potassium gluconate | Parameter | Method | Release limit | Appearance | Visual | White crystalline powder | Identification | Infrared and titration | Conforms to the reference | Assay (potassium gluconate) | Titration | 99.0–101.0% | Potassium (K) | Titration | 16.0–17.0% | Loss on drying | Gravimetric | ≤1.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeasts and moulds ≤100 cfu/g; E. coli absent; Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh ## Which basis, and why the two figures differ The assay is a titration of the gluconate and is expressed as potassium gluconate. The potassium line is an element figure. The bridge between them is stoichiometry: C6H11KO7 has a molecular weight of 234.25, potassium is 39.10, and 39.10 ÷ 234.25 gives 16.69%. That is the potassium content of a theoretical 100% salt. Multiply the assay by 16.69% and the expected potassium follows. The catalog assay window of 99.0–101.0% maps to 16.52–16.86% potassium, which is narrower than the 16.0–17.0% potassium window on the sheet. The wider window is there to absorb titration variability, not to describe a second grade. Basis is the second trap. A result calculated on the dried weight and a result calculated as received are not the same number when water is present. With a 1.0% water limit the difference can reach one percentage point, enough to move a lot from the middle of the assay range to its edge. The certificate should name the basis in the row, and the buyer should ask for the as-received figure because that is what the scale weighs. ## Gate, result and the words in between A specification is a set of limits; a certificate is a set of measurements against them. When the result column contains the same range as the limit column, the document has not recorded a measurement. The three-column layout below is the minimum that can be checked. What the result column should contain | Parameter | Release limit | Result column | Assay | 99.0–101.0% | A measured percentage, with the basis stated | Potassium | 16.0–17.0% | A measured percentage and the method | Loss on drying | ≤1.0% | A measured percentage | Heavy metals | Per element | A figure in mg/kg for each element, not one total | Microbiology | Counts and absence | The count and the absence statement for the lot Identity can reasonably be reported as “conforms” if the spectra and titrations are on file. Assay, potassium and water should be numbers. For the heavy metals, a result per element is required; a single sum cannot be compared with a destination limit. Microbiology needs both a count and an absence statement. ## Where lots actually differ The potassium figure is fixed by the formula, so it should not wander much between lots. Water, mesh, colour and trace metals are the lines that move, and they move for process reasons: crystallisation conditions, drying time, mill settings and the cleanliness of the line. Water is the first to watch. A lot released at 0.9% has very little room in a humid warehouse, while a lot at 0.2% can absorb some moisture before it reaches the gate. Neither is out of specification at release; they age differently. Appearance is the least specific line: white to off-white covers a broad range, so a shade difference alone should not be read as an identity result. A grey or yellow cast, or hard caking in the liner, is worth an investigation, but a slight change of tint is not. Mesh is a finishing variable: a 40 mesh result can change with a new screen without any change to the salt. ## When the supplier's sheet is not enough Independent testing earns its cost in four situations: a new source, a first shipment to a regulated market, a label dispute, or a potassium result that does not fit the assay. The panel can be short — FTIR, titration for assay and potassium, water, ICP-MS for the contaminant panel, and microbiology. Add sodium when sodium gluconate is a possibility, and chloride when potassium chloride is one. Ask each laboratory for its limit of detection. “Not detected” without a limit says something about the method, not about the powder. Ask, too, for the lot code on the report; a result that cannot be tied to the retained sample is difficult to use in a dispute. If a result is contested, send the retained sample, the supplier's certificate and the agreed specification to the referee. The useful instruction is to run the test that separates the suspected substitution, not to repeat the assay that both sides already have. ## Six lines for a supplier comparison Compare the salt and CAS number, the assay with its basis, the potassium figure, the water result, the contaminant and microbiology panel, and the pack with its lot code. Two sheets can agree on assay and disagree on potassium or basis, which means they do not describe the same powder. The second layer is provenance: the manufacturer, the process and the pack, with a lot code that matches pouch, drum and retained sample. Catalog limits are published on the product hub; the tests that distinguish the salt from a substitute are on the identity page; the market route is on the compliance page; the heavy-metal method is in the ICP-MS note; release is described on the quality page. ### 02 Potassium gluconate grades: the powder, the granulation and the fill URL: https://nutrition.rainwoodbio.com/products/minerals/potassium-gluconate/grades/ Reviewed: 2026-11-19 Potassium gluconate has one salt form in the catalog, so a grade here is a physical choice rather than a chemical one: the standard 40 mesh crystalline powder or a granulation made to order. The potassium figure is the same in both, because it is fixed by the formula at about 16.7%. What changes is flow, dust, bulk density, dissolve rate and water pickup — and those decide whether a capsule, tablet or stick can hit its fill. In one lineThere is one potassium gluconate salt, so a grade cannot raise the potassium figure; what it changes is mesh, flow, dust and water, and those decide whether the fill weight can be hit. ## Why the grade question is a powder question The catalog material is potassium gluconate, CAS 299-27-4, with one potassium per molecule. There is no monohydrate, no chelate and no second salt to choose, so a grade cannot make the powder stronger. A granulated lot from the same batch carries the same 16.69% potassium as the standard powder. What a buyer can change is the particle. A granulation binds fine crystals into larger, more uniform particles; that usually improves flow and cuts dust, while making the powder slower to dissolve. The standard 40 mesh material keeps a faster dissolve and is the usual starting point for sticks and drink mixes. Water is the variable that behaves like a grade. The anhydrous salt is specified at ≤1.0% loss on drying, but an open liner in a humid room will let water in. A purchase order that says only “potassium gluconate powder” leaves the mesh, the density and the water open. ## Standard powder and granulation, side by side Powder options · potassium gluconate | Attribute | Powder, 40 mesh (catalog) | Granulated, on request | Mesh | 95% or more passes 40 mesh | Coarser; set by the granulation | Bulk density | Measured per lot; request the figure | Typically higher; request both figures | Flow | Works in capsules; may bridge in a hopper | Steadier on a tablet press | Dust | Noticeable at transfer | Less at transfer | Tablet compression | Binder and density check needed | The usual tablet starting point | Stick or sachet fill | Accurate fill; disperses fast | Dissolves more slowly; check the mesh | Caking risk | Greater in an open liner | Lower, though not removed | Specification status | The catalog item | Separate specification; any aid declared The catalog names the mesh but not the bulk density, so ask for the density of the lot being offered. Granulation is a separate specification: it can change the particle-size line and may introduce a granulation aid that has to be declared. It is not a packing option. ## Flow, dust and the fill Dissolution is not the differentiator at this particle size: the salt is freely soluble and the solution is neutral. The differences appear at the filling line. A finer powder can bridge in a hopper, fluidise at the weigh station and leave dust on the equipment; a granulation flows more evenly and is easier to extract. Bulk density decides how much mass fits a fixed volume. Two 40 mesh lots can differ enough in density to move a capsule fill by several percent, and a volumetric stick filler is more sensitive still. For tablets, density and flow together decide whether the press runs cleanly; a granulated grade is usually trialled first. Hygroscopy links the powder to storage. Granules cake less in an open liner, but they still take up water; the 25 kg drum also has more air space and stays open longer than a 1 kg pouch. Close the liner and note the date it was opened. ## The fill follows 16.7%, not the grade Every gram of salt carries about 167 mg of potassium whether it is powder or granulate. A 500 mg capsule therefore holds about 83 mg; a 1 g stick about 167 mg; a 2 g stick about 334 mg. To reach the 300 mg per portion that the EU source-of-potassium claim requires, the formula needs about 1.80 g of salt. That number is the reason gluconate products are often larger than citrate products. The citrate monohydrate carries about 362 mg of potassium per gram, so the same 300 mg needs only about 830 mg of salt. The grade can improve how the gluconate fills; it cannot close that gap. Tablet weight behaves the same way. A 1,000 mg tablet of this salt delivers about 167 mg of potassium, and a 1,500 mg tablet about 250 mg. A formulator can change the tablet weight, the units per serving or the salt, but not the percentage of potassium in the salt. This page recommends no intake; the arithmetic is what keeps the label and the fill consistent. ## Specification lines that close the grade - “Potassium gluconate, CAS 299-27-4, C6H11KO7.” - “Assay 99.0–101.0% by titration, with the dried or as-is basis stated.” - “Potassium 16.0–17.0% by titration; report the method and the basis.” - “Loss on drying ≤1.0%; particle size ≥95% through 40 mesh.” - “Identification by infrared and titration; heavy metals and microbiology as listed.” - “Granulated or diluted variants are separate specifications with their own release limits.” We supply the 40 mesh powder as the catalog item. A granulated or diluted grade is a different purchase with its own specification, and substituting it without a written change control and a label check would leave the certificate and the fill out of step. ## When the granulated grade is wrong For a stick that must dissolve quickly, coarse granules can leave a gritty residue and slow the dissolve. For a high-speed press, the standard powder may flow too poorly to run, and granulation is the practical answer. The grade should be chosen against the process, not against a general preference. A diluted grade is a different decision: it lowers potassium per gram, so the fill must rise, and the carrier must be declared. It cannot make a small capsule carry a large potassium claim. If the claim needs more potassium in less powder, the salt has to change. Catalog limits and the standard packs are on the product hub. The gluconate-versus-citrate comparison works through the potassium and fill arithmetic in full; the COA page shows where the assay and potassium figures sit; the MOQ page covers packs and lead time; the particle-size entry explains what a mesh result does and does not say. ### 02.1 Potassium gluconate vs potassium citrate: the potassium figure and the fill URL: https://nutrition.rainwoodbio.com/products/minerals/potassium-gluconate/grades/potassium-gluconate-vs-citrate/ Reviewed: 2026-11-19 Potassium gluconate and potassium citrate monohydrate are both potassium salts, but they are not interchangeable by weight. The gluconate is C6H11KO7 at 234.25 g/mol and carries 16.69% potassium; the citrate monohydrate is C6H5K3O7·H2O at 324.41 g/mol and carries three potassium ions, or 36.16%. The same potassium figure therefore needs about 2.2 times the gluconate mass, and that difference decides the capsule, the stick and the tablet. In one lineA gram of potassium gluconate carries about 167 mg of potassium and a gram of potassium citrate monohydrate about 362 mg, so the same potassium figure needs roughly 2.2 times the gluconate weight. ## Two salts, two identities Both materials are potassium salts of organic acids, and both are white, water-soluble powders used in supplements. The difference is the anion and the number of potassium ions it balances. Gluconic acid is monobasic, so potassium gluconate carries one potassium per molecule. Citric acid is tribasic, so the fully neutralised citrate carries three, and the commercial monohydrate also carries one molecule of water. That gives each salt its own CAS number, molecular weight, assay, water limit and label name; a purchase order that says only “potassium” has named neither, and one cannot replace the other by adjusting the scoop. Potassium gluconate against potassium citrate monohydrate | Property | Potassium gluconate | Potassium citrate monohydrate | CAS number | 299-27-4 | 6100-05-6 | Formula | C6H11KO7 | C6H5K3O7·H2O | Molecular weight | 234.25 | 324.41 | Potassium per gram | About 167 mg | About 362 mg | Catalog potassium | 16.0–17.0% | 35.0–37.0% | Catalog assay | 99.0–101.0% | 99.0–100.5% | Water | ≤1.0% | 5.0–6.5% | Solution | Close to neutral | Alkaline | Label name | Potassium gluconate | Potassium citrate (monohydrate) ## The potassium figure, worked from the formula The potassium percentage is not a label convention; it follows from the molecular weight. For the gluconate, 39.10 ÷ 234.25 = 16.69%. For the citrate monohydrate, three potassium ions give 3 × 39.10 ÷ 324.41 = 36.16%. The catalog ranges, 16.0–17.0% and 35.0–37.0%, sit around those theoretical values and absorb method variation. Read the figures as grams of potassium per gram of salt: 0.167 g/g for the gluconate and 0.362 g/g for the citrate. The ratio between them is 2.17, and it stays the same whatever portion size the formula uses. A 5 g serving of the gluconate carries about 835 mg of potassium; a 5 g serving of the citrate carries about 1,808 mg. The second is not a better material, it is a more concentrated one. The figure also has to be read against the assay basis. At 1.0% water, a 100% dried-basis gluconate assay is 99% of the salt as received, and the as-received figure is the one that reaches the balance. The citrate's wider water range makes that gap larger. ## What the difference does to the fill Start with a common capsule fill of 500 mg. It delivers about 83 mg of potassium as the gluconate and about 181 mg as the citrate monohydrate. To deliver 99 mg of potassium, the gluconate needs about 593 mg of salt and the citrate about 274 mg. Those are capsule-scale differences: one fits a single capsule comfortably, the other is close to the limit of a standard fill. The gap widens as the claim rises. A 300 mg potassium portion, which is the EU source-of-potassium threshold, needs about 1.80 g of the gluconate and about 830 mg of the citrate. A 500 mg potassium portion needs about 3.0 g and about 1.38 g respectively. The gluconate answer is a two-gram stick or several large tablets; the citrate answer is a single tablet or a small stick. The salt choice is therefore a dosage-form decision before it is a taste decision: a capsule size fixed first will fit only one of the two, and a potassium claim fixed first still has to survive the tablet weight and the stick fill. ## Solubility, pH and taste Both salts are freely soluble in water, so neither presents a dissolution problem at a normal serving. The difference is the solution pH. Potassium gluconate gives a solution close to neutral; potassium citrate monohydrate gives an alkaline solution because the citrate anion is the conjugate base of a weak acid. The taste follows the pH and the anion, and the two are not interchangeable in a flavoured drink without a taste panel. The alkaline citrate solution can also react with acidic components in a formula, which changes the pH of the finished drink and may move the flavour. The neutral gluconate solution is the easier starting point for a system that is already pH-sensitive. Neither point is a health claim; both are formulation facts that belong in the trial, not in the marketing copy. In solution, both leave the potassium as the ion and an organic anion that microorganisms can use; a liquid needs preservation and a validated hold time either way. ## What the label must declare The ingredient list names the salt that was weighed, not the mineral alone. In the EU, the nutrition declaration states potassium in milligrams and as a percentage of the 2,000 mg reference intake. A product declaring 500 mg of potassium gluconate is declaring about 83 mg of potassium, and a panel whose potassium line carries the salt weight overstates the nutrient sixfold. In the United States, the Supplement Facts panel declares potassium against the 4,700 mg Daily Value and names the source in the ingredient list, for example “Potassium (as potassium gluconate)”. The 100 mg-per-tablet threshold in 21 CFR 201.306 belongs to oral potassium salt drug products; it is not a supplement maximum, and the buyer's team confirms which framework applies. A source-of-potassium claim in the EU needs 300 mg per portion, about 1.8 g of the gluconate or 830 mg of the citrate; the salt choice decides whether that fits the dosage form, and the label follows the choice. ## When to choose which Choose the gluconate when the formula wants a neutral solution, a milder taste and a larger fill is acceptable in the capsule, stick or tablet. Choose the citrate monohydrate when the fill is tight, the alkaline solution is wanted, or the label is already built around the citrate. In both cases, the label name, the potassium figure and the market file have to match the salt that was ordered. A switch either way is a change control: it moves the molecular weight, the potassium per gram, the water limit, the pH and the label name together. The potassium gluconate hub carries the catalog specification; the grades page covers the powder options; the potassium citrate page carries the other specification; the magnesium gluconate page shows how the same gluconate anion behaves with a different cation; the analytical methods library covers the assays; and the quality page describes the release file. ### 03 Potassium gluconate stability: the dry salt and the aqueous solution URL: https://nutrition.rainwoodbio.com/products/minerals/potassium-gluconate/stability/ Reviewed: 2026-11-19 In its sealed pack, potassium gluconate is a dry, crystalline salt with a 1.0% water limit and no light sensitivity worth designing around. Open the pack in a humid room and water starts to move; dissolve the salt and the problem changes from water pickup to microbiology, because a neutral gluconate solution is a good medium for microorganisms. The pack and the matrix, not the molecule alone, set the retest period. In one lineThe dry salt is stable while the pack stays sealed; once it is dissolved, water activity and the gluconate itself make microbiology the controlling risk. ## The unopened pack and the open liner Water is the only storage variable that matters much for the solid. The salt is hygroscopic enough that a pouch left open in a warm, damp room will gain moisture over days; the as-received assay falls, the powder cakes and the fill weight becomes less reliable. The foil pouch and the drum liner are therefore part of the specification in practice. Temperature cycling adds condensation. A cold pack brought into a warm room should be allowed to equilibrate before the seal is cut, or water will form on the powder. A hot loading bay is not a warehouse, and a van roof is not a store. Appearance changes slowly. White to off-white is a wide band, and a shade difference inside it is not a failure. Hard caking, a grey cast or a yellow cast is worth a water test and a look at the batch record. ## Dissolved: water activity and microbiology The salt dissolves freely and gives a neutral solution, which is convenient for sticks and drinks and also convenient for microbes. Gluconate is a carbon source, water activity is near 1.0, and the pH is close to neutral — three conditions that favour growth. A liquid formula needs a preservative system, a validated hold time and a microbiological limit of its own. pH is the next control. An acidic matrix shifts the gluconate/gluconic acid balance and can move taste and assay over a hold; a neutral matrix is more stable but also more hospitable. Headspace and packaging matter: a clear bottle in daylight and a large air gap are avoidable exposures. Heat completes the list. Pasteurisation or hot fill adds a load the dry powder never sees. A stick pack avoids that step because the consumer adds water at use, which is why the powder is the easier format to validate. ## What moves, and what controls it What changes in storage · potassium gluconate | Factor | Effect | Control | Moisture | Water content climbs; as-received assay drops; caking follows | Sealed pouch, dry store, closed liner | Heat | Speeds moisture pickup; adds a process load in liquids | Controlled store; cool process | Water activity | Growth and pH drift in an aqueous formula | Preservative and a validated hold time | pH | Moves the gluconate/gluconic acid balance | Buffer the matrix; verify target pH | Microbial load | A neutral gluconate solution supports growth | Preservative, filtration or heat process | Seal integrity | A pinhole lets humid air in | Check seals and liners on arrival These factors combine. A warm, damp store is worse than either alone, and a neutral drink in a clear bottle combines water activity, oxygen and time. The right question is not whether potassium gluconate is stable, but in which pack, at which condition and for how long. ## A study that can be read State the pack, the condition, the time points and the tests before starting. 25 °C/60% relative humidity covers the warehouse; 30 °C/65% is the intermediate arm; 40 °C/75% stresses the pack. A liquid needs an additional arm at the process pH and heat load. Test assay, potassium, water, appearance, identity and microbiology at each point; add pH and preservative efficacy for a drink. Report the individual results and the pack tested. A 1 kg pouch and a 25 kg drum have different headspace and opening histories, so one cannot stand in for the other. ## The matrix decides the failure mode A capsule or tablet is a low-water system, but the shell and excipients can still pass moisture to the fill, so check water and appearance after storage as well as at release. A two-piece capsule can soften in a humid market; that is a pack and desiccant question first. A stick pack's barrier is its seal. A pinhole is a failure even if the powder behind it still passes, so inspect the strip as well as the powder. A drink brings water activity, pH, heat and oxygen together; the bulk powder data is a starting point, not the answer. An overage is a formulator and label decision, not a repair for a leaking pack. ## Retest period, not a universal shelf life No single shelf-life number applies to the salt, because the number belongs to a pack and a storage condition. The retest period on the specification is backed by the study for that pack. A figure quoted without the pack, the condition and the test panel is an assertion, not a shelf life. When the period ends, assay the retained sample again before extending it. Extension should not be automatic, and a drum figure does not transfer to a repacked pouch. Pack options appear on the product hub; the release tests are set out on the COA page; dispatch and pack sizes are on the MOQ page; the water test is explained in the loss-on-drying entry; microbiology has its own method note; and the quality page describes the release file. ### 04 Potassium gluconate: MOQ, pack sizes and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/potassium-gluconate/moq/ Reviewed: 2026-11-19 Orders start at 1 kg in a foil pouch. Production volumes normally move to the 25 kg fiber drum, and the standard dispatch window is 1–7 days. A quotation becomes comparable only when it names the salt and CAS number, the specification and basis, the pack and quantity, the destination and Incoterm, the documents and the intended route. In one lineOne kilogram is the minimum because it is the smallest pack that carries a lot code and a retained sample, and it holds enough salt for about two thousand 500 mg capsules. ## How the 1 kg floor is set A kilogram is a practical unit rather than a round number. It carries about 167 g of potassium, which is 2,000 capsules at a 500 mg fill or ten 100 g pilot blends. It is also small enough to ship as a parcel and to keep as a retained sample after the trial. A 10,000-capsule pilot at the same fill needs 5 kg, so the buyer either takes five pouches from one lot or splits a drum. Below 1 kg the material is usually repacked from a larger lot, which adds a handling step and a new traceability record; the salt is unchanged, but the pack's identity is not. The drum lowers the handling cost per kilogram and raises the storage commitment. For a hygroscopic salt the trade-off is real: a drum opened many times over a year is a different storage proposition from a pouch used in a week. ## Packs and what they are for Potassium gluconate pack options | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Water-vapour barrier; close it after use | Fiber drum | 25 kg | Production | Liner inside; same lot code on drum and liner | Granulated powder | On request | Tablet flow and dust control | Separate specification and lead time | Diluted grade | On request | Lower potassium per gram | Carrier and label change The catalog item is a 40 mesh powder. Granulation and dilution are separate specifications with their own minimum and lead time, because they are made to order. Ask for the minimum with the grade, not after it. ## From confirmation to dispatch The 1–7 day window covers picking, documentation and handover to the carrier. Transit, customs and the customer's quality release sit outside it. A non-standard granulation or pack adds time, and the quotation should show that separately. Ask for a dispatch date as well as a lead time. A drum travels on a pallet, a pouch travels as a parcel, and the Incoterm decides who books the freight and clears the entry. Documents should accompany the lot. ## Six details that make a quote firm - Salt and CAS. Potassium gluconate, 299-27-4, spelled out. - Specification. Assay and basis, potassium, water, mesh, contaminants. - Quantity and pack. 1 kg pouch, 25 kg drum, granulated or diluted. - Destination and Incoterm. Country, port or address, trade term. - Documents. COA, specification, SDS and any market statement. - Route and market. Supplement, additive or other use, and where it will be sold. Without the route and the market, a quotation is a price for a powder rather than an offer for a use. Commercial terms are on the quotation, not on this page. ## What the sample has to prove The 1 kg pouch is the qualification unit. Test identity, assay, potassium, water and microbiology, and keep a retained sample from the same pack. The lot code on the pouch, the COA and the quotation should agree; a sample without a lot code is a demonstration. If a bench trial needs less than a kilogram, ask first. A split is a repack with its own record, and it may not come from the same lot as the production drum. ## Quality terms worth settling early The quality schedule should cover which specification revision applies, what each lot's certificate must show, how long a sample is kept, when the retest falls due and how a change is notified. A quality agreement is easier to negotiate before the first production order than after a disputed result. Decide how a failing lot will be handled: joint re-test on the retained sample, an agreed referee laboratory, and who pays. A photograph of the powder is not a test result. Catalog limits are published on the product hub; the release tests are listed on the COA page; the market files are on the compliance page; the term is defined in the MOQ glossary entry; and shipping is covered on the logistics page. ### 05 The regulatory file for potassium gluconate URL: https://nutrition.rainwoodbio.com/products/minerals/potassium-gluconate/compliance/ Reviewed: 2026-11-19 Potassium gluconate can enter a market by more than one door. As a food additive it is E 577; as a supplement ingredient it is a potassium source with a nutrition label. The two routes have separate lists, maximums and labelling logic, and a file that cites both without choosing one is not yet a file. The destination route is confirmed by the buyer's regulatory team. In one linePotassium gluconate can travel as food additive E 577 or as a potassium source in a supplement, and the file has to name the route before it cites a limit. ## Route first, documents second Begin with the question the certificate cannot answer: what is the finished product, and under which framework will it be sold? A supplement, a fortified food and a food-additive use are different regulatory objects even when the powder in the drum is identical. Once the route is named, the list to check, the maximum to respect and the label rule follow. The document pack then has four parts: identity and specification, route evidence, contaminant results converted to the finished dose, and label and claim review. The COA, TDS and SDS support those parts but do not replace them. ## European Union For the additive route, E 577 sits inside Regulation (EC) No 1333/2008, with specifications in Regulation (EU) No 231/2012. The usable categories and maximum levels are food-specific; a supplement is not automatically covered by an additive entry, and the buyer's team checks the category rather than the name. For the supplement route, Directive 2002/46/EC is the framework, and Annex II is the list to check for the exact potassium form. The buyer's team confirms the entry in the version in force. National maximum amounts and notification rules sit alongside the directive and differ between member states. Regulation (EU) No 1169/2011 governs the label: it lists the salt by name while potassium appears in milligrams against the 2,000 mg reference intake. Regulation (EU) 2023/915 supplies the contaminant limits, and Regulations (EC) No 1924/2006 and (EU) No 432/2012 govern claims. ## United States A dietary supplement needs a documented basis for the ingredient's lawful use, and that document belongs in the supplier file. Manufacturing falls under 21 CFR 111, labelling under 21 CFR 101.36, and the Supplement Facts panel declares potassium against the 4,700 mg Daily Value while the ingredient list names the salt. The food-additive and GRAS routes are separate. 21 CFR 201.306 is separate again: it applies to oral potassium salt drug products and sets conditions at 100 mg of potassium per tablet. It is not a supplement maximum, and the buyer's team decides which framework the product is in. State rules run in parallel. California Proposition 65 works from daily exposure rather than drum concentration, so a lot that passes an EU limit can still trigger a warning at a high daily intake. ## Contaminants at the real dose The catalog figures describe the raw material. The destination figures apply to the product as sold. Because this salt is often most of the serving, there is little dilution to hide a contaminant, so the conversion should be done before the order rather than after. Contaminants · catalog raw material against the EU supplement reference | Element | Catalog raw material | EU supplement limit | Note | Lead (Pb) | ≤3 mg/kg | 3.0 mg/kg as sold | Little headroom in a salt-heavy serving | Cadmium (Cd) | ≤1 mg/kg | 1.0 mg/kg as sold | Confirm the category that applies | Mercury (Hg) | ≤0.1 mg/kg | 0.10 mg/kg as sold | The same figure on both sides | Arsenic (As) | ≤2 mg/kg | No EU-wide supplement figure | National and customer limits vary At 1.8 g of salt in a 2 g serving, a 3.0 mg/kg finished-product lead limit implies a raw-material ceiling near 3.3 mg/kg. The catalog line of 3 mg/kg fits with little margin; a cleaner lot or a smaller salt share buys the margin back. ## Claims and the label EU potassium claims are authorised wordings with conditions, including a source-of-potassium threshold of 300 mg per portion (15% of the 2,000 mg reference intake). That threshold is about 1.8 g of this salt. The brand's reviewer applies the authorised wording and checks the condition; this page does not make the claim. In the US, a structure/function statement is the brand's wording, must be truthful and substantiated, and carries the DSHEA disclaimer. No disease claim is available in either market. ## What belongs in the file - Batch certificate for the lot: identity, assay, potassium, water, contaminants and microbiology. - Specification and technical data sheet with the salt, the grade and the basis named. - Safety data sheet, 16 sections. - Allergen, GMO, origin and residual-solvent statements. - Food-additive statement for E 577, where that route applies. - A US dietary-ingredient basis document, if the buyer's route requires it. - An independent laboratory report, if the market or the customer requires one. ## Before the first order - Is the route named: food additive, supplement, or both in separate files? - Is the exact potassium form checked against the destination list, with the version in force? - Recalculated at the real dose, do the contaminant results still sit inside the finished-product limit? - Does the nutrition panel declare potassium in milligrams from this salt, not the salt weight? - Has the claim wording been checked against the authorised list, with the US disclaimer where it applies? - Are the specification, certificate and quotation on one revision? Catalog limits are on the product hub; the lot certificate is explained on the COA page; the analytical evidence is on the identity page; the instruments are collected in the EU regulatory summary; the permitted-source list is explained in the Annex II entry; and the quality page describes the release file. ### 06 How we prove a potassium gluconate lot is the named salt URL: https://nutrition.rainwoodbio.com/products/minerals/potassium-gluconate/identity/ Reviewed: 2026-11-19 Potassium gluconate can be identified with equipment most contract laboratories already have. Infrared spectroscopy shows the gluconate anion; a titration measures the salt; the potassium figure should land near 16.69%; and water explains the difference between the dried and as-received results. The four measurements together are stronger than any single assay percentage. In one lineIdentity is three agreeing measurements — the infrared spectrum, the gluconate titration and a potassium figure close to 16.7% — plus a water result that closes the mass balance. ## Four questions, four pieces of evidence A supplier can name the salt correctly and still ship a blend, and a titration can sit in range while the cation is wrong. The layers below are independent, so each row needs its own result rather than a shared “conforms”. Four layers of potassium gluconate identity | Layer | Question | Test | What it proves | Document | Is the salt named? | Name, CAS number, formula | Paperwork only | Infrared | Is the solid the gluconate? | FTIR against a reference spectrum | The anion, in the solid state | Titration | How much salt is present? | Titration for the gluconate | Quantity, not identity | Potassium | Is the cation potassium? | Titration, flame photometry or ICP-OES | The element | Water | Is the mass balance consistent? | Loss on drying | Whether the assay figures add up ## The 16.69% check The formula gives the expected potassium. C6H11KO7 weighs 234.25 g/mol, potassium contributes 39.10, and the ratio is 16.69%. A salt assay of 99.0–101.0% therefore corresponds to 16.52–16.86% potassium. If the reported figure sits far outside that band, either the assay, the potassium method or the identity of the material is wrong. Different salts move the figure in different directions. Potassium citrate monohydrate carries about 36.16% potassium and potassium chloride about 52.4%, so either would push the result up. Sodium gluconate keeps the anion but replaces the cation, so the potassium figure falls while sodium rises. A dextrose or maltodextrin dilution lowers the assay and the potassium together. Work an example. A potassium result of 15.0% implies a salt content of about 89.9% if all the potassium comes from the gluconate, which is below the assay floor. A result of 17.0% implies about 101.8%, above the ceiling. Either edge is a prompt to read the method and the water, not an automatic reject. ## Where X-ray diffraction fits X-ray diffraction sees the crystal lattice, not the potassium. It can show that a lot is crystalline, compare it with a reference pattern, or detect an amorphous carrier in a blend. It is not a release test here, and a “conforms” line without the pattern and the reference proves very little. Use XRD when the question is solid form: a suspect blend, a new source, or a lot that behaves differently on the press. Pair it with FTIR for the anion and titration for the cation. The three methods answer three different questions, and none of them is a substitute for the others. ## Signals of substitution Common potassium gluconate substitutions and the signals | Adulterant | What it does | Signal | Test | Dextrose or maltodextrin | Dilutes the salt | Assay and potassium both low; water may rise | Assay, potassium, FTIR | Sodium gluconate | Same anion, different cation | Potassium low; sodium high | Potassium and sodium by ICP-OES | Potassium citrate | Different anion, more potassium | Potassium far above 16.7%; alkaline solution | Potassium, FTIR, citrate test | Potassium chloride | Much more potassium per gram | Potassium above 20%; chloride present | Potassium, chloride test, FTIR | Water | Lowers the as-received assay | Loss on drying high; dried assay normal | Loss on drying Colour is the weakest clue: white to off-white covers too much ground. The potassium figure, the infrared spectrum and the mass balance are the useful signals. A certificate with appearance and assay but no identity has not tested the most likely substitution. ## Specification wording - “Potassium gluconate, CAS 299-27-4, C6H11KO7.” - “Assay 99.0–101.0% by titration, with the dried or as-is basis stated.” - “Potassium 16.0–17.0% by titration; report the method and the basis.” - “Identification by infrared against a reference spectrum, and by titration.” - “Loss on drying ≤1.0%; particle size ≥95% through 40 mesh.” - “No sodium gluconate, potassium citrate or potassium chloride above the stated limit.” ## Five questions for the supplier - Which salt is this lot, and which CAS number appears on the certificate? - Can you provide the infrared spectrum, not only an “identity conforms” line? - What are the assay and potassium results, and on which basis were they calculated? - What is the loss on drying for this lot, and how does it close the mass balance? - If the results are contested, will you re-test the retained sample jointly with us? Five answers of that kind make a file that can be audited; one assay number cannot. Catalog limits sit on the product hub; the certificate layout is explained on the COA page; powder options are on the grades page; the FTIR method note explains what an infrared match can and cannot prove; the XRD note covers the solid-state check; and the quality page describes the release workflow. ### 01 What the COA for potassium iodide actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/potassium-iodide/coa/ Reviewed: 2026-11-19 A potassium iodide certificate reports the assay by titration at 99.0–101.5%, the iodide content at 75.0–78.0%, loss on drying at ≤1.0%, identification by IR and titration, the heavy-metal panel and microbiology. The assay and the iodide figure describe the same salt and should agree through the 76.45% theoretical iodine fraction. The sheet should also show the reducing-agent limit named in the catalog note, because iodide that has oxidised is no longer the material the buyer ordered. In one lineThe assay, the iodide figure and the loss on drying belong on one certificate: together they show whether the lot is potassium iodide or a diluted or oxidised version of it. ## The certificate as a test report A certificate is a test report, not a statement of conformity. Each line should name the parameter, the method and the release limit, and the measured result should sit in its own column. A row that says “conforms” without the figure behind it asks the reader to trust a conclusion. The identity row decides whether the material is potassium iodide. The assay and iodide rows decide how much of it is there. The water row decides how much of the weighed powder is not the salt. Identity, assay, water and contaminants · potassium iodide | Parameter | Method | Release limit | Appearance | Visual | White crystals or powder | Identification | IR and titration | Conforms to the reference | Assay | Titration | 99.0–101.5%; state the basis | Iodide (iodine) | Titration | 75.0–78.0% | Loss on drying | Gravimetric | ≤1.0% | Heavy metals | ICP-MS, each element | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Aerobic count and yeast/mould | Plate count | Not more than 1,000 cfu/g; not more than 100 cfu/g | E. coli and Salmonella | Absence tests | Absent | Particle size | Sieve analysis | ≥95% through 40 mesh ## Assay basis, the iodide figure and the water The assay is normally reported on the dried basis, but the certificate has to say so. The two quantitative lines are linked by the formula: KI contains 126.90 g of iodine per 166.00 g of salt, or 76.45% iodine by mass. A lot that measures 100.0% assay on the dried basis therefore carries 76.45% iodide, a lot at 99.0% carries 75.69%, and a lot at 101.5% carries 77.60%. All three sit inside the 75.0–78.0% iodide window, which is why the two ranges are bought together. If the assay is reported on the as-is basis instead, the loss on drying is the bridge. A certificate that reads 99.0% as-is at 0.8% loss on drying is 99.8% on the dried basis; the iodide figure should be read against the same basis. The common mistake is to compare an as-is assay with a dried-basis iodide value and conclude that the lot is out of specification when the numbers are simply on different footings. Identification by IR and titration is a separate question. The IR spectrum should be compared with a reference, and the titration values should agree with the declared salt. Ask for the spectrum and the titration method, not only the word “conforms”. ## Release limit versus batch result The release limit is the boundary; the batch result is what the laboratory measured. Both belong on the page, in separate columns, with the method beside them. A result column filled with the specification range is a copy of the gate, not evidence that the lot passed it. What the result column should contain | Parameter | Release limit | Result column | Assay | 99.0–101.5% | A measured percentage, with the basis and method | Iodide | 75.0–78.0% | A measured percentage on the same basis | Loss on drying | ≤1.0% | A measured percentage | Free iodine and reducing agents | Limit set in the specification | The measured figure and the method | Heavy metals | Per element | A measured figure in mg/kg for each element “Passes specification” is a conclusion; the reader should be able to reach it from the numbers. A heavy-metal total hides the element that matters, and a microbiology line without the count hides the magnitude. ## What moves between batches Crystallisation and drying move the assay and the water. Milling and sieving move the particle-size result, so the 40 mesh line can change when the mill or the sieve changes without any change in the chemistry. Exposure to air and light moves the colour: free iodine is yellow to brown, and a white lot that starts to look cream is telling the reader something. Colour is not a quantitative test. A pale yellow tint can come from a small amount of free iodine, from a different drying step or from a packaging leak; the free-iodine or reducing-agent line is what separates those cases. Rejecting on colour alone can discard a lot that still meets the assay and iodide limits, and accepting on colour alone can miss oxidation that has not yet moved the assay. Watch the direction of travel rather than a single result near a limit: water rising, iodide falling, or a yellow tone appearing in the retained sample. The lot code should link the certificate, the pouch, the drum and the retained sample. ## When to order an outside test An outside test earns its place when the source is new, the destination is a regulated market, the identity is disputed or the powder has changed colour. Do not simply repeat the certificate: specify IR, titration for assay and iodide, loss on drying, ICP-MS metals, microbiology, and a dedicated free-iodine or iodate test. Add chloride and bromide by ion chromatography if a white diluent is the concern. The report should give a detection limit for every screen. A “not detected” line without one describes the method, not the sample. If a result is contested, send the referee the retained sample, the supplier's certificate and the specification, and ask for discriminating tests rather than a second run of the same assay. ## What to compare between suppliers Compare suppliers on six lines: identity and CAS; assay with its basis; iodide; water; free iodine or reducing agents; metals, microbiology and pack. If two offers agree on assay but not on the iodide basis or the water, they describe different powders. The potassium iodide product page carries the catalog specification. The identity page shows how the iodide figure is used as a check, the compliance page covers the destination file, the methods notes describe the titration and IR work, and the quality page describes the release workflow. ### 02 Potassium iodide forms: crystals, powder and dilution URL: https://nutrition.rainwoodbio.com/products/minerals/potassium-iodide/grades/ Reviewed: 2026-11-19 Potassium iodide is supplied as crystals, as a 40 mesh powder and, for some projects, as a dilution or premix. The catalog form is the powder; crystals are available on request. The choice is decided by the dosage form and by the small mass of iodide in each dose, not by the assay, which stays 99.0–101.5% across the forms. In one lineThe grade is a handling decision: crystals dissolve cleanly, a 40 mesh powder blends more evenly, and a dilution is what makes a microgram dose weighable. ## Why the form matters more than the assay There is one chemical identity here. Potassium iodide is KI, CAS 7681-11-0, and the assay window does not change with the physical form. What changes is the particle size, the flow, the dust and the way the material can be weighed into a blend. Those are handling properties, and they decide whether a production line can hit the label figure. The grade question also has a purity side. A technical-grade iodide and a food or supplement grade can share an assay while differing in the heavy-metal panel, the manufacturing controls and the documentation. A technical grade is not the supplement material even when the certificate looks familiar. The specification should name the grade and the destination use before the first order. ## The physical forms side by side Physical forms of potassium iodide and where each one fits | Form | What it is | Handling | Typical fit | Crystals | Coarse crystalline salt | Low dust; dissolves readily; can segregate in a blend | Solution preparation; a crystal form requested by the customer | 40 mesh powder | Milled powder, ≥95% through 40 mesh | Flows and blends more evenly; some dust | Capsules, tablets and dry blends | Fine powder | Milled below the standard sieve | More dust and static; needs containment | When a finer dispersion is required | Dilution or premix | KI on a carrier, with a stated assay | Lets a small dose be weighed accurately | Low-dose capsules, tablets and sachets The 40 mesh figure is a sieve result, not a purity claim. A lot that passes 40 mesh is not automatically better than a crystal for every use; it is simply the form the catalog specifies. A dilution is a different specification, with a carrier, an assay and a homogeneity check. ## Solubility, moisture and handling Potassium iodide is freely soluble in water, about 1.4 g per millilitre of water at room temperature, and the solution is neutral to slightly alkaline. The solid is hygroscopic and light-sensitive. Crystals can cake in a humid store; a powder picks up moisture faster because it has more surface, and it can dust or hold static during weighing. These properties are the reason the pack matters more than the form. A foil pouch or a lined drum is not a marketing detail; it is the barrier that keeps the water below the 1.0% loss-on-drying limit. A clear jar is the wrong container for a light-sensitive iodide, and an open scoop is the wrong way to hold a hygroscopic powder. The solution should be clear and colourless to very pale. A yellow tint points to free iodine, which is a handling and storage signal rather than a grade difference. The grade cannot repair a pack that lets light and moisture in. ## Dose arithmetic and blend uniformity The label dose is an iodine figure, not a potassium iodide figure. The conversion is fixed: 1 mg of iodine needs 1 ÷ 0.7645 = 1.31 mg of KI. A 150 µg iodine dose needs about 196 µg of KI, and a 220 µg dose needs about 288 µg. If the lot assay is 99.0% on the as-is basis, divide by the assay as well: the same 150 µg dose needs about 198 µg of the powder as weighed. Those masses are tiny against a normal capsule fill. In a 500 mg capsule, 196 µg of KI is 0.039% of the fill; a direct blend cannot distribute that evenly. A dilution or premix, or a stock solution for a liquid format, is the practical way to get the iodide into the batch. The dilution carrier and the final assay belong in the specification, and the label still declares iodine, not the premix weight. These are arithmetic examples, not dose recommendations. The formulator and the brand set the label dose; the supplier's job is to make the mass and the assay reproducible. ## What to write into the specification - “Potassium iodide, CAS 7681-11-0, KI.” - “Assay 99.0–101.5% by titration; state the basis.” - “Iodide 75.0–78.0% by titration; state the basis.” - “Loss on drying ≤1.0%; free iodine or reducing agents within the agreed limit.” - “Particle size ≥95% through 40 mesh, or crystals on request.” - “Heavy metals and microbiology as listed on the catalog specification.” - “Dilution, if used: carrier, assay, homogeneity and label name stated.” We supply the 40 mesh powder as the catalog form and crystals on request. A dilution is a project specification, not a stock pack. The product hub carries the catalog values; the COA page shows how the assay and iodide are reported; the stability page covers the moisture and light risk; the potassium gluconate page shows a different potassium salt with a very different potassium figure per gram. ### 02.1 Potassium iodide vs kelp: the iodine figure and the label URL: https://nutrition.rainwoodbio.com/products/minerals/potassium-iodide/grades/potassium-iodide-vs-kelp/ Reviewed: 2026-11-19 Potassium iodide carries 76.45% iodine by mass, and the catalog range is 75.0–78.0%, so a label dose converts by arithmetic: 150 µg of iodine needs about 196 µg of KI. Kelp is dried seaweed whose iodine content varies with species, harvest and processing, so the label has to name the source and declare a tested iodine figure. Switching between the two changes the ingredient name, the mass per dose and the evidence the file needs. In one linePotassium iodide has a fixed iodine figure; kelp has a variable one, so the label has to name the source and declare the amount that was tested. ## The iodine figure in potassium iodide Potassium iodide is a defined salt, so its iodine figure follows from the formula. Iodine is 126.90 of the 166.00 g/mol, or 76.45% by mass; potassium is the remaining 23.55%. The catalog assay window of 99.0–101.5% and the iodide window of 75.0–78.0% are the same statement seen from two directions. A 100% lot carries 76.45% iodine; the bottom of the assay window still carries 75.69%. That fixed figure is what makes the label arithmetic possible. A 150 µg iodine dose needs 150 ÷ 0.7645 = 196 µg of KI, and a 1 mg iodine dose needs 1.31 mg. If the lot assay is 99.0%, divide by the assay as well. The figure is a property of the salt, not of the supplier or the batch. ## What kelp actually contains Kelp is not one material. The word covers several brown seaweeds, including Laminaria and Ascophyllum species, and the iodine content differs by species, harvest site, season and processing. Reported values for dried brown algae commonly sit between about 0.1% and 1% of dry weight, with some species higher; kelp is one of the strongest iodine accumulators in the sea. A label that says “kelp” has named a botanical, not a concentration. The species belongs in the specification, and the label should name it so the source is unambiguous. So does the iodine figure for the lot, measured rather than assumed. Seaweed can also carry inorganic arsenic and heavy metals, so the contaminant panel is part of the source decision, not an afterthought. A kelp certificate that reports only “kelp powder” has not given the formulator a dose. ## The label arithmetic The difference in concentration is the practical point. At 0.1% iodine, 100 mg of dried kelp carries 100 µg of iodine; at 1%, the same 100 mg carries 1,000 µg. A 500 mg kelp serving therefore spans roughly 500 to 5,000 µg of iodine across that range, which is why a kelp label cannot be built on the botanical weight alone. Potassium iodide is about 765 times as concentrated as kelp at 0.1% iodine and about 76 times at 1%. The label arithmetic runs in both directions. For KI, divide the iodine target by 0.7645 to get the salt mass. For kelp, divide the iodine target by the lot's measured iodine fraction; a certificate that gives iodine in mg/kg makes that division direct. The daily portion, the number of servings and the analysed figure are the three inputs, and the label declares the iodine that results. ## What the label has to say In the EU, the ingredient list names the source: “potassium iodide” or “kelp (species)”. The nutrition declaration gives iodine in µg and as a percentage of the 150 µg reference value. If a product contains both sources, both are named and the total iodine is declared. “Iodine from kelp” is a source statement, not a quantity; the quantity belongs in the nutrition declaration. In the US, the Supplement Facts panel declares iodine in µg and as a percentage of the 150 µg Daily Value, and the ingredient list names the source. The species should be written out for a kelp ingredient. The label must match the source on the certificate: a kelp certificate does not support a potassium iodide claim, and the reverse is also true. ## Claims, limits and the source No disease-related claim is made for either source. In the EU, Regulation (EU) No 432/2012 lists iodine claims that may be used only with their conditions; they concern normal function, and the product must qualify as a source of iodine under the claim rules. The brand's reviewer confirms the wording and the market. In the US, a structure/function statement is written and substantiated by the brand and must carry the DSHEA disclaimer. The label dose also has a ceiling to respect. EFSA sets a tolerable upper intake level of 600 µg per day for adults; the US Institute of Medicine sets 1,100 µg per day. These are intakes from all sources. Kelp's variable figure makes the ceiling easier to cross without intent, which is why the lot test and the serving size have to be read together. ## What to write into the specification Write the source into the specification before the label. For potassium iodide: the name, CAS 7681-11-0, assay 99.0–101.5% with the basis, iodide 75.0–78.0%, loss on drying ≤1.0%, free iodine or reducing agents, heavy metals, microbiology and particle size. For kelp: the species, the iodine figure and its method, the contaminant panel including inorganic arsenic, the particle size and the harvest or origin record. Choose potassium iodide when the label needs a defined salt and a reproducible iodine figure. Choose kelp when the botanical is the ingredient the brand wants, but then test every lot and declare the iodine that was found. A switch in either direction is a change of source, specification, label and regulatory file, not a substitution at the weigh-up. The product hub carries the catalog specification; the grades page covers the physical forms; the compliance page covers the destination framework; the identity page covers the analytical checks; the methods notes describe the assay work; the quality page describes the release file. ### 03 Potassium iodide stability: moisture, light and the pack URL: https://nutrition.rainwoodbio.com/products/minerals/potassium-iodide/stability/ Reviewed: 2026-11-19 Potassium iodide is hygroscopic and light-sensitive, and iodide oxidises to iodine when it is exposed to air, moisture or light. The solid is most stable in a sealed, opaque pack at low humidity; an aqueous solution is the least stable format. Shelf life is assigned from stability data for the exact pack and storage condition, not from the certificate. In one lineMoisture, light and oxygen are the three variables that turn iodide into iodine; the pack and the storage condition decide how quickly that happens. ## The solid: moisture, light and colour The catalog limit is loss on drying ≤1.0%, and that number is tighter than it looks. Potassium iodide is hygroscopic; in a humid store it picks up water, cakes and can deliquesce at the surface. The water itself dilutes the as-is assay, and it also feeds the oxidation chemistry that turns iodide into iodine. The solid should stay in its original foil pouch or lined drum, closed, in a dry and dark store. Once a pouch is opened, the headspace is humid air and the seal is no longer the one the stability file was built on. For a long hold, transfer the remainder to a smaller opaque container or use it within the stated in-use period. A desiccant can help in a humid climate, but it does not replace a seal. Temperature matters through condensation. A cold drum brought into a warm room can collect water on the inner liner; let it equilibrate before opening. A hot loading bay or a vehicle in summer accelerates both moisture pickup and oxidation. ## The solution: the least stable format Potassium iodide dissolves freely, and the solution is neutral to slightly alkaline. In solution the stability question changes: oxygen, light, heat and pH act at the same time. Acid conditions favour the formation of iodine from iodide; an alkaline hold can shift the balance towards iodate. Neither extreme is a safe default, and the right pH is a property of the matrix, not a universal number. A clear bottle on a bench is the wrong container. Use an opaque or amber container, keep the headspace low, and validate the hold time before filling. A ready-to-drink process adds a heat load through pasteurisation or hot fill; a dry stick pack avoids that step because the consumer adds water at the point of use. A bulk-powder stability result does not transfer to a beverage. The matrix, the process and the pack each change the rate, and the drink's shelf life has to be measured in the drink. ## What drives degradation Factors that move potassium iodide during storage | Factor | What it does | Control | Moisture | Raises loss on drying; cakes the powder; feeds oxidation | Sealed foil or lined drum; dry store | Light | Accelerates the iodide-to-iodine change | Opaque or foil pack; dark store | Oxygen | Oxidises iodide, especially in solution | Low headspace; sealed pack; process control | Heat | Raises the rate of moisture and oxidation damage | Controlled store; cool process | pH | Moves the iodine/iodide/iodate balance in solution | Validate the matrix pH; buffer if needed | Metal ions | Catalyse iodide oxidation in solution | Avoid iron and copper contact These factors are not independent. A warm, bright, humid store is worse than the sum of three separate effects, and a clear glass bottle of solution combines all of them. The useful stability question is not “is potassium iodide stable?” but “stable in which pack, at which condition, for how long?” ## A stability protocol for the ingredient A useful protocol states the pack, the storage condition, the time points and the tests. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% relative humidity cover the warehouse; accelerated storage at 40 °C/75% relative humidity stresses the pack. A light-exposure arm covers the failure mode that a dark incubator misses. Test assay, iodide, loss on drying, appearance, free iodine or reducing agents and microbiology at each point. For a solution, add pH and a matrix-specific iodine assay. The report should show individual results, not only a pass statement, and it should identify the pack and the lot family. Ask for the stability summary for the pack you will buy. A 25 kg drum and a 1 kg pouch have different headspace and different opening histories; the data belongs to the pack. ## The finished formula changes the answer A capsule or tablet has low water activity, but the shell and the excipients can still transfer moisture. Check loss on drying at release and after storage, and check the appearance of the fill. A wet-granulation step adds water and heat; a direct-compression route avoids that, but it still needs a dry store and a moisture-barrier pack. A dry stick pack is only as good as its seal; a pinhole is a failure, and the strip should be inspected, not only the powder. A beverage combines light, pH, heat and oxygen, and the ingredient's bulk stability is the starting point rather than the answer. The declared dose is small, so a small absolute loss is a large share of the label figure. The formulator decides whether an overage is needed; that is a label and stability decision, and it does not repair a pack that lets moisture in. ## How the shelf life is set We do not publish a single shelf-life number for potassium iodide, because the pack and the storage condition set it. The assigned retest period belongs on the specification and is supported by the stability file for that pack. A number without a pack, a condition and a test panel is not a shelf life; it is a claim. After the retest period, re-assay the retained sample before extending use. Do not extend by assumption, and do not carry a bulk figure across to a repacked container. The product hub lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the methods notes describe the assay; the quality page describes the release workflow. ### 04 Potassium iodide: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/potassium-iodide/moq/ Reviewed: 2026-11-19 The MOQ for potassium iodide is 1 kg, supplied as a 1 kg foil pouch; the bulk pack is a 25 kg fiber drum. Lead time is 1–7 days for the standard pack. A firm quotation needs the identity and CAS number, the assay basis, the iodide and free-iodine limits, quantity and pack, destination and Incoterm, the documents, and the intended use. In one lineOne kilogram is the smallest pack that can be sampled, tested and traced as a lot; it is a traceability unit, not a dose count. ## Why the minimum is 1 kg The 1 kg pouch is a commercial unit with a lot code, not a scoop from a drum. It is large enough to cover a bench trial, a retained sample and an independent identity test, and small enough to ship as a parcel. That combination is why it sets the minimum. The dose count is not the reason. One kilogram of KI carries about 765 g of iodine, which is roughly 5.1 million doses at 150 µg. A small brand may never consume the pack; it still needs a traceable lot to qualify the material. Below 1 kg, the material is usually split from a larger lot and repacked, which adds handling and loses the original pack identity. The 25 kg fiber drum is the bulk unit. It reduces handling per kilogram, but it commits inventory and a longer storage period for a hygroscopic, light-sensitive salt. The MOQ is a pack decision, not a volume incentive. ## Packs and formats Standard potassium iodide packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Light and moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Dilution or premix | Agreed with the order | Low-dose blending | Carrier, assay and homogeneity are part of the specification Crystals are available on request in the same pack family, subject to the order. Granulation or dilution is a different specification, not a packing choice. If the dosage form needs a dilution, say so before the quotation, because the carrier, the assay and the homogeneity work move the lead time. ## Lead time and dispatch The standard pack is quoted at 1–7 days from order confirmation. That window covers picking, document preparation and dispatch; it does not include shipping transit, customs clearance or the customer's own quality release. A dilution, a non-standard pack or an extra analytical line adds time, and the quotation should state it separately. Potassium iodide is hygroscopic and light-sensitive, so the dispatch date matters as much as the lead time. Ask when the foil pouch (1 kg) or the drum (25 kg) will leave, and keep the COA, SDS and lot code with it. The pouch is parcel freight; the drum goes on a pallet. Freight booking and entry clearance follow the Incoterm. For crystals or a dilution, confirm the production date separately, because neither is the standard 40 mesh powder. ## What a quotation needs Six items make a quotation firm enough to compare: - Product and form. Potassium iodide, CAS 7681-11-0, with the physical form named. - Specification. Assay basis, iodide, loss on drying, free iodine or reducing agents, particle size, heavy metals and microbiology. - Quantity and pack. 1 kg pouch, 25 kg drum, crystals or a dilution. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, specification, SDS and any market-specific statement the importer needs. - Intended use and market. Supplement, food or another use, and the market where it will be sold. A quotation without the market and the physical form is incomplete. Commercial terms are on the quotation; this page does not carry them. ## The sample is a lot, not a demonstration The 1 kg pack is the qualification sample. Test identity, assay, iodide, loss on drying and microbiology before scaling, and keep a retained sample from the same pack. The lot code on the sample, the COA and the quotation should match. A sample that cannot be traced to a lot is a demonstration, not a qualification. The sample should be representative of the lot. Potassium iodide is a single salt, so segregation is not the main risk; moisture pickup and surface oxidation are. Keep the sample sealed and dark, and open it only for the sub-sample. If a smaller bench quantity is needed, discuss it before ordering: a split from a bulk lot is a repack with its own traceability, not the catalog pack. ## Terms to settle before the first order Quote potassium iodide by form and assay basis, not by name alone. The offer should name the crystals or 40 mesh powder, the 25 kg drum or the 1 kg foil pouch, the trade term and the shipping window, then add which specification version applies, the COA release lines, a retained portion, the date each lot is due for retest and the change-control route when a dilution is introduced. The iodide and free-iodine limits belong on the same sheet. Settle the quality agreement while the order is still a draft. A potassium iodide return should start from the retained sample, not a photograph. Re-test assay on the stated basis, iodide, loss on drying and free iodine, and check the powder for caking or a yellow tint that suggests oxidation. The pouch is light- and moisture-sensitive, so record how it was stored after opening. The quotation and quality agreement should name the laboratory and who covers the referee analysis. The product hub carries the catalog specification; the COA page lists the release tests; the stability page covers the storage risk; the potassium gluconate page shows a different potassium salt with a much lower potassium figure per gram; the quality page describes the release file. ### 05 The regulatory file for potassium iodide URL: https://nutrition.rainwoodbio.com/products/minerals/potassium-iodide/compliance/ Reviewed: 2026-11-19 Potassium iodide is an iodine source, and its regulatory file has to show both the material and the route: the specification version, the lot certificate, the destination market and whether the finished product takes the supplement route or the food-additive route. The buyer's regulatory team confirms that route. This page names the frameworks and the documents the file should contain; it is not a legal opinion. In one lineThe certificate proves the lot; the destination file proves the route, the iodine level and the label, and only the buyer's regulatory team can confirm it. ## What has to be in the file Four questions shape the file. What specification version, grade and form are on the order? What does the certificate say about the lot being released? Which limits and label rules govern the finished product? And what is the change route for source, process and pack? The certificate answers the lot, the technical data sheet answers the specification, and the safety data sheet answers handling. The route question needs its own answer. For a mineral salt, the supplement route and the food-additive route are different files. The same potassium iodide can be a nutrient source in a supplement, an additive in a food, or a processing aid in another application, and the documents, the limits and the label change with the route. The buyer's regulatory team names the route for the destination; this page names the checks. ## European Union Directive 2002/46/EC is the food-supplement framework. Annex I names the vitamins and minerals that may be used, and Annex II is the source list against which potassium iodide is checked. The buyer's regulatory team confirms the current entry, the purity criteria and any national condition; the annexes change, so the consolidated text current on the day of the label review is the reference. Labelling follows Regulation (EU) No 1169/2011. The ingredient list names potassium iodide, and the nutrition declaration gives iodine in µg and as a percentage of the nutrient reference value, which is 150 µg per day. Where both potassium iodide and kelp are present, both sources are named and the total iodine is declared. Contaminants are governed by Regulation (EU) 2023/915, and the claim register by Regulation (EU) No 432/2012. General food law, the food-supplement rules and any national limit sit alongside those instruments. Check the current text before the order; this summary is not a substitute for it. ## United States The US route is the dietary-supplement framework. The file names the basis the supplier relies on for the ingredient, and the buyer's team confirms that the basis covers the intended use and level. Manufacturing falls under the dietary-supplement cGMP rule in 21 CFR 111, and the label is reviewed under the supplement labelling rules. On the Supplement Facts panel, iodine is declared in µg with its percentage of the Daily Value, which is 150 µg for adults and children four years and older. The ingredient list names the source, potassium iodide or kelp, and a blend names both. A structure/function statement is written and substantiated by the brand and must carry the DSHEA disclaimer; a disease claim is outside the framework. ## Contaminants and the iodine ceiling The contaminant result on the drum is a concentration, not an intake. The file has to convert the lot figure to the daily dose of the finished product and compare it with the limit that applies there. The table is a starting point for a supplement file; the destination text and the dose settle the final number. Contaminant references for a potassium iodide supplement file | Element | Reference level in the supplement | Evidence the file needs | Lead (Pb) | 3.0 mg/kg | Measured result, method and dose calculation | Cadmium (Cd) | 1.0 mg/kg | Measured result; note any category exception | Mercury (Hg) | 0.10 mg/kg | Measured result and method | Arsenic (As) | Agreed with the customer or set by the market | The chosen limit and the method reported Iodine has its own ceiling. EFSA sets a tolerable upper intake level of 600 µg per day for adults; the US Institute of Medicine sets 1,100 µg per day. Those are intakes from all sources, not targets. The label dose, the iodide figure on the COA and any other iodine in the diet are the inputs to the check, and the buyer's team confirms the value that applies. The conversion is the same one used on the label: iodine = KI mass × 0.7645. A 1 mg KI dose carries about 765 µg of iodine, which is already above the EFSA adult upper level. That is why the dose and the salt weigh-up have to be checked together. ## Claims and label wording No disease-related claim is made for this ingredient. In the EU, Regulation (EU) No 432/2012 lists iodine claims that may be used only with their conditions; they concern normal function, and the product must qualify as a source of iodine under the claim conditions, measured on the daily portion. The brand's reviewer confirms the exact wording and the market. In the US, a structure/function statement is written and substantiated by the brand and must carry the required disclaimer. Approval of a claim is separate from approval of a specification. A certificate cannot authorise label text, and label text cannot change what was tested. ## Documents to assemble The file should hold the current specification, with the version, grade and form identified; the lot COA; the TDS; the SDS; an origin statement with allergen and GMO declarations; the heavy-metal and microbiology results; the free-iodine or reducing-agent result; the finished-product intake calculation; the label artwork and claim review; and the change-control route for source, process and pack. For an inorganic iodide, residual solvent is rarely the gap that matters. The usual gaps are the assay basis, the free-iodine or reducing-agent line, the grade and the destination route. If a document is missing, record the gap before the purchase order, not after the shipment arrives. Version numbers on the document list are more useful than a folder of undated files. ## Before the first order - The specification names potassium iodide, the CAS number and the physical form. - The grade and the destination use are stated. - COA, TDS, SDS, origin, allergen and GMO documents are present. - The heavy-metal results are converted to the finished-product dose. - The iodine intake is checked against the upper level that applies. - The label names the source and the claim has been reviewed. - Source, process and pack sit under change control. The product hub carries the catalog specification; the COA page covers the lot certificate; the identity page covers the analytical evidence; the methods notes describe the tests; the quality page describes the release file. ### 06 How we prove a potassium iodide lot is the named salt URL: https://nutrition.rainwoodbio.com/products/minerals/potassium-iodide/identity/ Reviewed: 2026-11-19 A potassium iodide lot is the named salt when four lines agree: the document names KI and CAS 7681-11-0, IR matches the reference, titration gives 99.0–101.5% assay with 75.0–78.0% iodide, and loss on drying is ≤1.0%. The iodide figure against the assay should land near the theoretical 76.45% iodine fraction. A low iodide figure with a normal assay points to a diluent or to oxidation. In one lineIdentity is the agreement between the iodide figure, the assay and the water: any one of them alone can describe a different white salt. ## Four checks, one identity Identity is not one test. It is four answers that have to agree, and each answer rules out a different mistake. The document layer rules out a naming error. IR rules out the wrong salt family. Titration measures the iodide and the assay. The water result decides how much of the weighed powder is not the salt. A supplier who supplies only the first answer has supplied a label, not evidence. Four checks that together identify potassium iodide | Check | Question it answers | Method | What it establishes | Document | Is the salt named? | Name, CAS number, formula | Paperwork only | Spectroscopy | Is the salt the reference material? | IR against a reference | The salt family | Titration | How much iodide and how much KI? | Titration for assay and iodide | The amount and the iodine fraction | Water | How much of the powder is water? | Loss on drying | The mass balance The checks are routine except for a disputed lot. What separates a good file from a thin one is not the method list but whether the figures are reported, and whether they share a basis. ## The iodide-to-assay ratio The theoretical iodine fraction is 126.90 ÷ 166.00 = 76.45%. The catalog pairs 99.0–101.5% assay with 75.0–78.0% iodide, and the ratio makes the two windows consistent: 99.0% × 0.7645 = 75.69%, and 101.5% × 0.7645 = 77.60%. A lot that reports 100.0% assay and 70.0% iodide is not a slightly low iodide lot; the two figures do not describe the same powder. A low iodide figure with a normal assay is the signature of a white diluent or of oxidation. Potassium chloride and sodium chloride are white and free-flowing, and a certificate that reports only the assay can miss them; chloride by ion chromatography, or sodium and potassium by ICP-OES, separates them. Oxidation leaves free iodine, which shows as a yellow tint, a higher free-iodine result and a pH shift in solution. The ratio is a cross-check, not a release test, and it only works when both figures share a basis. An as-is assay compared with a dried-basis iodide figure can look inconsistent when the lot is fine. State the basis before drawing a conclusion. ## X-ray diffraction and the solid state X-ray diffraction answers a different question: is the solid crystalline, and does the pattern match potassium iodide? KI crystallises in the cubic system, and its lattice spacing differs from potassium chloride, potassium bromide and sodium chloride, so a reference pattern separates the white salts that a visual check cannot. An amorphous diluent gives a broad halo instead of sharp reflections. XRD is not a routine release test for this product. A certificate that says “XRD conforms” without the pattern, the scan range and the reference has added little. Ask for those three things if the solid form is disputed. On a disputed lot, XRD, titration and water together are stronger than any one of them. ## What adulteration looks like Common potassium iodide substitutions and the signals | Material | What it does | Signal | Test | Potassium chloride | White diluent; lowers iodine | Iodide low; potassium normal or high; chloride high | Ion chromatography, titration | Sodium chloride | White diluent; lowers iodine | Iodide low; sodium high | ICP-OES, ion chromatography | Potassium bromide | White diluent; interferes with some assays | Bromide high; iodide low | Ion chromatography | Potassium iodate | Different iodine figure and oxidising behaviour | Iodate test positive; assay behaviour differs | Iodate-specific test, titration | Dextrose or maltodextrin | White diluent; raises loss on drying | Iodide low; water or organic content high | Loss on drying, IR, titration | Water | Dilutes the powder; cakes it | Loss on drying high; as-is assay low | Loss on drying Colour is the weakest signal. White covers a wide range, and a blend can reproduce it. The stronger signals are the iodide figure against the assay, the water result and the chloride or bromide figure. ## Writing identity into the specification - “Potassium iodide, CAS 7681-11-0, KI.” - “Assay 99.0–101.5% by titration; state the basis.” - “Iodide 75.0–78.0% by titration; state the basis.” - “Loss on drying ≤1.0%.” - “Identification by IR and titration, against a reference.” - “Free iodine or reducing agents within the agreed limit; report the method.” - “Heavy metals and microbiology as listed on the catalog specification.” - “No substitution of another iodide salt or a dilution without written change control.” ## Five questions for the supplier - Which salt and CAS number is this lot, and which physical form? - Can you provide the IR spectrum and the titration method, not only the assay percentage? - What is the iodide result, and is it on the same basis as the assay? - What is the loss on drying, and what is the free-iodine or reducing-agent result? - If the lot is disputed, will you accept a joint re-test on the retained sample? Five direct answers amount to an identity file. A single assay percentage does not. The product hub carries the catalog specification; the COA page shows where each figure sits on the certificate; the grades page compares the physical forms; the kelp comparison covers the source and label question; the sodium selenite page shows another inorganic salt where oxidation state is the specification; the methods notes explain the titration and IR work. ### 01 What the COA for sodium citrate dihydrate actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/sodium-citrate/coa/ Reviewed: 2026-11-19 A sodium citrate dihydrate certificate reports appearance, identification by infrared spectrum and the citrate reaction, assay by titration on the anhydrous basis, the sodium figure, water by Karl Fischer, the pH of a 5% solution, the heavy-metal panel, microbiology and particle size. The assay and the sodium figure are two views of the same salt, and neither is complete without the water result beside it. The ranges below are the catalog specification; a batch certificate is the document that confirms one pack. In one lineThe assay is reported on the dry matter and the sodium figure on the powder as weighed, so the water result is the line that ties the two numbers to one salt. ## The certificate as a test report A certificate is auditable when each line carries what was measured, the method behind the number, and the limit it was released against. A row that says “conforms” asks the reader to accept a conclusion without the evidence. Here the identity row fixes the hydrate and the salt form, the assay row fixes how much trisodium citrate is present, and the sodium row cross-checks both. Identity, assay, water and contaminants · sodium citrate dihydrate | Parameter | Method | Release limit | Appearance | Visual | White crystals or powder | Identification | Infrared spectrum; citrate reaction | Conforms to the reference | Assay, anhydrous basis | Titration | 99.0–100.5% | Sodium, as weighed | Calculated from the assay; ICP-OES on request | 22.5–24.0% | Water | Karl Fischer | 11.0–13.0% | pH, 5% solution | Potentiometric | 7.5–9.0 | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Aerobic plate count; absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh The pH row is not in every catalog, but the alkalinity is part of how the salt behaves in a formula; agree a window and report a measured value when the application depends on it. ## Anhydrous basis, as-weighed sodium and the water line Sodium citrate is assayed on the anhydrous basis: the laboratory measures the powder as received, then divides by the dry matter. A lot at 99.2% anhydrous with 12.0% water contains 99.2 × 0.88 = 87.3% sodium citrate as weighed. The gap is crystal water, and it is why an as-is percentage and an anhydrous percentage describe different powders. The sodium line is reported on the powder as weighed, and the arithmetic explains the window. Three sodium ions in a molecule of 294.10 g/mol give 23.45% sodium in the pure dihydrate and 26.72% in the anhydrous salt. The catalog range of 22.5–24.0% is therefore a hydrate figure; a sodium result read against an anhydrous assay would look low by roughly the water fraction. If the certificate does not say which basis the sodium row uses, ask before comparing two suppliers. Water by Karl Fischer should sit between 11.0% and 13.0%, against 12.25% by formula. A result near 11.0% is a drier crystal; one near 13.0% leaves less room for pickup in a humid warehouse. Loss on drying at 150–180 °C is a different test from Karl Fischer, because it also drives off any residual volatile; the certificate should name the method it used. ## Release limit versus batch result The limit is the boundary a lot has to meet; the result is the number the bench actually obtained. Put both in separate columns, with the method beside them. A result column filled with the specification range is a copy of the gate, not a result. What the result column should contain | Parameter | Release limit | Result column | Assay | 99.0–100.5% anhydrous | The percentage measured, with basis and method named | Sodium | 22.5–24.0% as weighed | The figure measured, with its basis named | Water | 11.0–13.0% | A measured percentage by Karl Fischer | Heavy metals | Per element | One result per element, in mg/kg | Microbiology | Counts and absence | The count, plus the absence statement | Particle size | ≥95% through 40 mesh | The percentage that passed the sieve “Passes specification” is a conclusion, and the reader should be able to reach it from the numbers alone. A total for heavy metals hides the element that matters; microbiology needs a count beside the absence statement; the assay needs a value, a basis and a method. ## What moves between batches Crystallisation and drying move the water result first and the anhydrous assay second. Milling and sieving move the particle-size figure without changing the chemistry, so a new mill can change the certificate while the salt is the same material. The pH of a 5% solution moves with residual acid or a trace of carbonate, and either can be visible on the certificate before it is visible in the powder. Caking is the failure a certificate cannot show. A lot released at 13.0% water and stored in a humid warehouse can arrive as a lump; the assay and the water result were inside their limits at release, and the pack and the store did the rest. Ask for the water result and the store history together. A trend across lots says more than one result at an edge: water climbing, the anhydrous assay drifting, or pH moving in the same direction. Four items carry one lot code: the certificate, the pouch, the drum and the retained sample. ## When an outside test is worth ordering An outside test earns its place on a new source, a first export shipment, a disputed hydrate or a chloride question. The panel worth ordering is narrower than a repeat of the certificate: infrared identity, titration, Karl Fischer water, sodium by ICP-OES, the metals panel by ICP-MS, chloride by ion chromatography or titration, and microbiology. A citrate figure by HPLC adds an independent view of the anion when the titration result is challenged. Add X-ray diffraction when the hydrate state is in dispute or a crystalline chloride is suspected. Every screen should carry its detection limit, because “not detected” without one describes the laboratory's sensitivity rather than the drum. Keep the sample that was tested and the sample that was retained identical, and make sure the report names the lot. If a result is contested, hand the referee the retained sample, the certificate and the specification, and ask for the discriminating tests on hydrate and chloride instead of a rerun of the same assay. ## Six points of comparison between suppliers Compare six things: the hydrate and its CAS number; the assay and the basis it is calculated on; the sodium figure and its basis; water; the contaminant and microbiology results; the pack and its lot code. If two quotations agree on assay but disagree on hydrate or basis, they describe different powders. The second layer is traceability: who manufactured the lot, which drying and milling steps were applied, and which specification revision is on file. Catalog ranges are listed on the product hub. For the tests that separate the hydrate from the anhydrous salt, see the identity page; the market file is set out on the compliance page; titration and water methods are described in the methods library; the release workflow is on the quality page. ### 02 Sodium citrate grades: the dihydrate, the anhydrous salt and the physical form URL: https://nutrition.rainwoodbio.com/products/minerals/sodium-citrate/grades/ Reviewed: 2026-11-19 Sodium citrate is bought as the trisodium salt in one of two hydrate states: the dihydrate, which is the commercial standard, and the anhydrous salt. The choice fixes the sodium per gram, the water result on the certificate and the mass that delivers a given sodium dose. The physical form — a 40 mesh powder or coarser crystals — fixes flow, dust and the tablet or stick-pack process. “Sodium citrate” on a purchase order specifies none of these. In one lineThe hydrate is the specification: the dihydrate carries 12.25% water and 23.45% sodium, and the anhydrous salt carries no crystal water and 26.72% sodium. ## Why the name covers several grades Citric acid has three carboxylic groups, so sodium can replace one, two or all three protons. Monosodium citrate, disodium citrate and trisodium citrate are three different salts with different sodium figures and different solution pH values. Each also has its own hydrate forms: trisodium citrate crystallises as a dihydrate, disodium citrate as a sesquihydrate, and monosodium citrate in both anhydrous and hydrated forms. The commercial supplement and food ingredient is almost always trisodium citrate dihydrate. A second distinction is paperwork rather than chemistry. The same dihydrate can be sold against a food-additive monograph or against a supplement specification, and the two files carry different limits, different labelling and different names on the label. The powder can be identical; the destination route is not. The third distinction is physical. A crystallised dihydrate can be milled to 40 mesh, left as crystals, or granulated to change flow. Each is a separate line on the specification, and a change of mill or sieve is a change of grade even when the chemistry is untouched. ## Dihydrate and anhydrous side by side Sodium citrate dihydrate against the anhydrous salt | Property | Dihydrate | Anhydrous | CAS number | 6132-04-3 | 68-04-2 | Formula | C6H5Na3O7·2H2O | C6H5Na3O7 | Molecular weight | 294.10 | 258.07 | Sodium by mass | About 23.45% | About 26.72% | Water of crystallisation | 11.0–13.0% | No crystal water; a low limit is agreed | Assay basis | Anhydrous, with water reported | As weighed, water is low | Behaviour in a dry blend | Stable; cakes in a humid store | Takes up water readily | Usual use | The standard commercial grade | Where water in the formula is unwanted The table is the whole decision in eight lines. The dihydrate is 12.25% water by formula, so a kilogram of it contains 877.5 g of sodium citrate and 122.5 g of water. The anhydrous salt is the same molecule without that water, which is why it carries more sodium per gram and why it is the more hygroscopic of the two. ## Solubility, alkalinity and the physical form The dihydrate dissolves freely in water and is practically insoluble in ethanol. A 5% solution reads about pH 8.3, and the pharmacopoeial window of 7.5–9.0 for a 5% solution is wide enough to cover the variation from residual acid or carbonate. That alkalinity is a property of the salt, not an additive: the citrate anion is the conjugate base of citric acid, so the solution resists a fall in pH until the buffer is exhausted. The catalog form is a 40 mesh powder, ≥95% through 40 mesh. A finer powder disperses faster and dissolves faster, but it dusts and it cakes harder under pressure. Coarser crystals flow better and dissolve more slowly, which matters in an effervescent tablet where the citrate must dissolve at the same time as the acid and the bicarbonate. Granulation is a third option when the blend needs a free-flowing particle; it changes the particle-size line and usually the lead time. Bulk density and flow are not on the catalog sheet. If the process is a direct-compression tablet or a high-speed sachet line, ask for those figures on the sample, not on a generic data sheet. ## Sodium per gram and the mass per serving The label arithmetic starts with the sodium figure. One gram of dihydrate delivers 234 mg of sodium; one gram of the anhydrous salt delivers 267 mg. To put 200 mg of sodium into a serving, the formulator weighs 200 ÷ 0.234 = 855 mg of dihydrate, or 200 ÷ 0.267 = 749 mg of anhydrous salt. A label that changes the hydrate without changing the weigh-up moves the sodium by 12–14%. The same arithmetic runs the other way. A formula that declares 500 mg of sodium citrate dihydrate delivers 117 mg of sodium; the same 500 mg of the anhydrous salt delivers 134 mg. Neither figure is a recommendation, and the finished product's status is a separate legal question; the numbers are what keep the label, the weigh-up and the certificate on one basis. The dosage form decides which physical grade is practical. A capsule takes the 40 mesh powder and a fill weight sized on the dihydrate. A stick pack takes the same powder but needs a seal that keeps humidity out, because the powder cakes once it takes up water. An effervescent tablet takes a coarser, free-flowing grade and depends on the citrate dissolving with the acid and bicarbonate. A liquid takes either hydrate, because the water is already there. ## What to write into the specification - “Trisodium citrate dihydrate, C6H5Na3O7·2H2O, CAS 6132-04-3.” - “Assay 99.0–100.5% by titration on the anhydrous basis; water 11.0–13.0% by Karl Fischer.” - “Sodium 22.5–24.0% on the powder as weighed, with the basis stated on the certificate.” - “pH of a 5% solution 7.5–9.0; identification by infrared spectrum and the citrate reaction.” - “Particle size ≥95% through 40 mesh, or the crystal or granulated grade agreed in writing.” - “Heavy metals and microbiology as listed; chloride limit stated if the route requires one.” A specification that names only “sodium citrate” and a mesh has left the hydrate, the sodium basis and the chloride question open. Those three lines are what a buyer is actually buying. ## When the other grade is the wrong choice The anhydrous salt is the wrong choice when the process is a dry blend that will sit in a humid store: it takes water back and cakes sooner than the dihydrate, and the water result on arrival may no longer match the release certificate. It is the right choice when the formula cannot accept the 12.25% crystal water, or when a higher sodium per gram shortens the tablet. The dihydrate is the wrong choice when the sodium load is the constraint. A gram of the dihydrate still carries 234 mg of sodium, and no grade of sodium citrate removes it; the answer there is a different salt. The potassium citrate page covers the potassium salt of the same anion, and potassium gluconate covers the lower-potassium-per-gram alternative. For the sodium-versus-chloride question, the level-four comparison sets out sodium per gram, taste and acid load. Catalog ranges sit on the product hub; the COA page shows how each grade is reported; packs and lead time are on the MOQ page. ### 02.1 Sodium citrate vs sodium chloride: sodium, taste and the acid load URL: https://nutrition.rainwoodbio.com/products/minerals/sodium-citrate/grades/sodium-citrate-vs-chloride/ Reviewed: 2026-11-19 Sodium citrate dihydrate and sodium chloride both deliver sodium, and they differ in three places that matter to a formula: the sodium per gram, the taste of the solution, and the acid–base accounting. One gram of sodium chloride carries 393 mg of sodium; one gram of sodium citrate dihydrate carries 234 mg. At equal sodium the citrate salt weighs 1.68 times as much, tastes salty with a tart finish, and brings a citrate anion that is metabolised as a base. The chloride brings none of that. In one lineAt equal weight sodium chloride delivers 68% more sodium than sodium citrate dihydrate; at equal sodium the citrate salt is heavier, tastes tart as well as salty, and carries a bicarbonate equivalent that the chloride does not. ## The sodium figure per gram The arithmetic is fixed by the formulas. Sodium is 22.99 of the 58.44 g/mol of sodium chloride, or 39.34%; it is three atoms, 68.97 of the 294.10 g/mol of the dihydrate, or 23.45%. The dihydrate also carries 12.25% crystal water, which is sodium-free mass and the main reason the two figures sit so far apart. Sodium chloride and sodium citrate dihydrate at equal sodium | Measure | Sodium chloride | Sodium citrate dihydrate | Sodium by mass | 39.34% | 23.45% | Sodium per gram | 393 mg | 234 mg | Salt needed for 500 mg sodium | 1.27 g | 2.13 g | Salt equivalent on the label (sodium × 2.5) | 983 mg per g | 586 mg per g | pH of a 5% solution | About 7, neutral | About 8.3, alkaline A formulator who replaces one gram of sodium chloride with one gram of the citrate salt has cut the sodium by 40%, but has also changed the mass, the taste and the pH of the serving. ## The taste of the two solutions Chloride is the anion the tongue reads as salt. Sodium chloride gives a clean, immediate saltiness with no aftertaste at usual levels; at high concentration the same ion turns bitter and metallic, which is why a strong brine tastes bitter as well as salty. Sodium citrate also tastes salty, but the salt note arrives with a tart edge and a longer, slightly alkaline finish, because the citrate anion buffers the acids on the palate instead of leaving them free. The practical consequence is that citrate is a poor direct substitute in a salted snack and a good one in a beverage. In a drink it softens a sharp acid note, rounds off a mineral aftertaste and lets a lower sodium figure read as seasoned. In a dry blend it contributes less saltiness per gram, so a one-for-one replacement tastes flat; the mass and the flavour both have to be rebuilt. Chloride also tastes of the other ions in the mix. In a formula with potassium chloride, the chloride amplifies the bitter potassium note; a citrate salt is milder in that combination. That is one reason potassium citrate and potassium gluconate are used where a chloride-free mineral blend is wanted, a point the potassium citrate and potassium gluconate pages take further. ## The acid load: citrate against chloride Citric acid has three carboxylic groups with pKa values near 3.13, 4.77 and 6.40. Sodium citrate is the fully deprotonated salt, so a solution at pH 8.3 holds the anion in its basic form and buffers any acid added to it until the citrate is used up. Sodium chloride has no such equilibrium: its solution is neutral, and the chloride ion takes no part in acid–base buffering. The difference continues after absorption. Citrate is an intermediate of the citric acid cycle; when it is metabolised, each citrate anion is associated with about three bicarbonate equivalents. Chloride is not metabolised in that way and yields no bicarbonate. Acid-load tables that score foods and salts use this accounting, together with protein, phosphate, potassium and magnesium. That is a chemical and nutritional statement, not a claim about a health effect. Acid load is a property of the whole diet, and a single salt swap changes one term in it. Whether the change matters for a finished product is a question for the buyer's nutrition and regulatory team. ## What the switch does to the label In the European Union the nutrition declaration gives sodium in mg and a salt equivalent calculated as sodium × 2.5. One gram of sodium citrate dihydrate adds 235 mg of sodium, which is 588 mg of salt equivalent and about 29% of the 800 mg reference intake for sodium. The same gram of sodium chloride adds 393 mg of sodium and 983 mg of salt equivalent. Salt on an EU label is this calculated figure, not sodium chloride, so a chloride-free product still declares salt. The ingredient list names the salt itself or, on the additive route, “sodium citrates (E331)”. In the United States the Supplement Facts panel declares sodium in mg against a 2,300 mg daily value; the same gram of citrate gives about 10% of that value, and the ingredient list names “sodium citrate”. The claim review is separate in both markets: the wording, the portion and the conditions are checked against the destination rules by the brand's reviewer. No disease-related claim is made for either salt on this page, and a change of anion does not create one. The compliance page sets out the documents and the framework questions. ## When to choose which Choose sodium chloride when the job is saltiness at the smallest mass, when the formula is a simple electrolyte system, and when the chloride has a nutritional role of its own. Choose sodium citrate when the formula needs a buffer in the acidic range, when trace metals have to be held in solution, when chloride would corrode the equipment or amplify a bitter note, or when a tart-saline taste is wanted. Citrate also sequesters calcium and magnesium, which is why it is used to control hardness and trace metals in a beverage. Neither salt is the low-sodium answer on its own. Replacing chloride with citrate lowers the sodium per gram, but a serving sized on sodium still carries the same sodium. Where the sodium figure is the constraint, the answer is a potassium salt or a smaller serving, not a different sodium salt. ## What changes when you switch Five things change together. The mass per serving rises by 68% at equal sodium. The taste moves from clean salt to salt with a tart finish. The solution pH moves from about 7 to about 8.3, which can shift an acid-sensitive colour or flavour. The certificate gains a citrate assay and loses the chloride question, or the reverse. The label changes its ingredient name, its sodium figure and its salt equivalent. Run the switch as a change control: new specification, new weigh-up, a taste panel and a stability check in the real matrix. The powder is the easy part. Catalog ranges sit on the product hub; the COA page shows the lines that move; the grades page covers the hydrate choice; the methods library describes the titration and the water test; the release file is on the quality page. ### 03 Sodium citrate stability: water, caking and the pack URL: https://nutrition.rainwoodbio.com/products/minerals/sodium-citrate/stability/ Reviewed: 2026-11-19 Sodium citrate dihydrate is a chemically quiet solid. It does not oxidise, it has no chromophore to bleach, and its crystal water is held until the powder is heated. The failures that matter are physical and microbiological: water uptake and caking in a humid store, and, once the salt is in solution, microbial growth and reaction with the minerals it chelates. The pack and the storage condition carry most of the shelf life. In one lineThe dihydrate is chemically quiet; the number that moves is water, and the pack, the store and the process decide whether it moves at all. ## The powder: water, caking and heat The dihydrate is 12.25% water by formula and the catalog window is 11.0–13.0%. That water sits in the crystal lattice and is not released at room temperature; drying at 150–180 °C is what drives it off, which is why the water line is a release test rather than a storage indicator. The anhydrous salt is the opposite case: it has no crystal water and takes water from the air readily, so it needs the tighter pack of the two. The dry failure is caking. The dihydrate is only mildly hygroscopic, but a powder held in a humid store picks up surface water, the particles stick, and the bag sets into a lump. Pressure makes it worse: a 25 kg drum stacked at the bottom of a pallet consolidates the powder even when the humidity is moderate. The assay and the water result can both be inside their limits at release while the pack arrives unusable, because neither test sees consolidation. Heat alone does not degrade the salt at warehouse temperatures. A hot loading bay or a container roof in summer accelerates the water movement and the caking, but the citrate itself is stable. Light is a minor factor: a white powder has nothing to photo-degrade, so the pack is chosen for moisture. ## The solution: alkaline, heat-stable and still vulnerable The salt dissolves freely in water, and a 5% solution reads about pH 8.3. The anion does not hydrolyse, so a citrate solution survives pasteurisation and hot fill; that is one reason it is used as a buffer in heat-processed drinks. The vulnerability is elsewhere. At pH 8.3 a sugar-containing drink is still a microbiological medium, and a preservative system designed for an acidic drink may not work. The solution also chelates calcium, magnesium and iron. In hard water the calcium can come out as calcium citrate if the ratio and the pH are wrong, and a trace of iron gives a yellow-brown tint that no amount of filtration removes. A citrate solution stored in a mild-steel tank picks up exactly that iron. The process controls are ordinary: use soft or deionised water where the formula allows, keep the solution in stainless steel or a lined tank, hold it at a validated temperature, and measure the pH after any acid or mineral is added. A buffer is not a preservative, and a clear solution is not a stable one. ## What drives change Factors that move sodium citrate dihydrate during storage | Factor | What it does | Control | Humidity | Surface water, caking, water result climbs | Sealed moisture-barrier pack; dry store | Pressure | Consolidation and hard caking in the drum | Stack height limit; rotate stock | Heat | Drives crystal water off above 150 °C | Cool process; no hot-air conveying | Acids | Buffered; pH falls; an acidic active is neutralised | Check compatibility and pH after mixing | Calcium and magnesium | Chelation; precipitation in hard water | Soft water; check the mineral ratio | Iron | Chelation and yellow-brown discolouration | Stainless steel contact; iron limit on the pack | Microbiology | Growth in solution at pH 8.3 | Preservative or heat treatment; hold time | Light | No meaningful effect on the solid | Opaque pack for moisture, not for light The table has eight rows because the salt has no dramatic chemical failure mode; a programme built for a vitamin would spend its effort on light and miss humidity and pressure. ## A stability protocol for the ingredient A protocol is only as good as its specification of pack, condition, time points and test panel. Two conditions describe the warehouse: 25 °C/60% relative humidity for the long term and 30 °C/65% for the intermediate case, with 40 °C/75% supplying the accelerated arm. Add a humidity-cycling arm and a pressure arm, because caking is the failure the standard chambers describe least well. Test assay by titration on the anhydrous basis, water by Karl Fischer, pH of a 5% solution, appearance, and the sieve result. Add microbiology at release and at the end of the study, and chloride if the route sets a limit. Weigh the powder out of the pack and inspect it for lumps as well as assaying it; a caked lot can pass the chemistry and fail the process. The report should identify the pack and the lot family and show the individual results, not a pass statement. A 1 kg foil pouch and a 25 kg fiber drum differ in headspace, in opening history and in the pressure they carry; data from one does not describe the other. If the material is repacked, run the study on the repacked container too. ## The finished formula changes the answer In a capsule or tablet the water activity is low, yet the shell and the excipients still pass moisture and the tablet is compressed. Check the water result at release and after storage, and check the hardness and the appearance of the fill. In a tablet, citrate can neutralise an acidic active and raise the local pH; that is a compatibility question, not a stability one, and it belongs in the formulation study. A stick pack depends on the foil and the seal. A pinhole lets humid air in, and the powder nearest the breach cakes first, so inspect the strip as well as the powder and state the in-use period after opening. An effervescent tablet adds a second sensitivity: the citrate and the bicarbonate are both hygroscopic, and a damp granule can start the reaction before the consumer adds water. A liquid brings the chelation and the microbiology together with the heat load. The bulk powder data only start the assessment; the hold time has to be measured in the real matrix. ## How the shelf life is set There is no single shelf-life figure for sodium citrate, because the pack and the condition are part of the answer. The retest period on the specification is tied to stability data from that pack. A figure offered with no pack, no condition and no test panel is an assertion, not a shelf life. Once the retest period ends, re-assay the retained sample before any extension. Do not extend by assumption and do not carry a bulk result across to a repacked container; a caked drum can be re-blended, but the re-blend is a new lot for traceability. Standard packs are listed on the product hub; release tests are set out on the COA page; pack sizes and lead time are on the MOQ page; the water and titration methods are described in the methods library; the release workflow is on the quality page. ### 04 Sodium citrate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/sodium-citrate/moq/ Reviewed: 2026-11-19 Sodium citrate dihydrate is sold from a 1 kg foil pouch, and that pouch is also the smallest order; production runs use the 25 kg fiber drum. Standard packs leave within 1–7 days of confirmation. A quotation becomes firm only when six details are settled: the hydrate and CAS number, the assay basis together with the sodium and water figures, the quantity and pack, the destination and Incoterm, the documents, and the route the material will take. In one lineOne kilogram is the minimum because the pouch is the smallest unit that carries its own lot code, certificate and retained sample. ## Why the floor is one kilogram A kilogram is enough for a bench trial, a retained sample and an independent test, and it travels as a parcel rather than a pallet. More usefully, it is a lot: one fill, one lot code, one certificate. Anything smaller is normally split from a larger batch and repacked, which adds handling and breaks the link to the original pack without changing the crystals. The drum is a different purchase. It cuts handling per kilogram and suits a production run, but it also commits inventory and a longer storage period, and this salt cakes under pressure and humidity. A buyer who cannot use 25 kg before the powder sets is better off with several pouches. The floor is a pack decision. ## Packs and formats Packs and formats for sodium citrate | Pack | Net weight | Where it fits | Notes | Foil pouch | 1 kg | Trials, samples, small runs | Moisture barrier; fold and clip after use | Fiber drum | 25 kg | Production runs | Lined; code on both drum and liner | 40 mesh powder | 1 kg or 25 kg | Capsules, tablets, stick packs | The catalog form; ≥95% through 40 mesh | Crystals | On request | Effervescent and coarse blends | Different flow and dissolution rate The catalog material is a 40 mesh powder. Crystals are a separate specification rather than a packing option: the sieve line, the flow and the dissolution time all move. If the process needs a coarser or granulated particle, raise it before the quotation, because the change touches the specification and often the lead time. ## Lead time, dispatch and documents Standard packs are quoted at 1–7 days from order confirmation. Picking, documents and dispatch sit inside that window; transit, customs and the customer's own release do not. A different sieve, a granulated grade or a special pack adds time, and the quotation should show it as a separate line. The dispatch date is more useful than the lead time on its own. A drum goes as pallet freight, a pouch as a parcel. The Incoterm names the party that books the freight and the party that clears customs. Documents that arrive after the lot leave it in quarantine, so they travel with the goods. ## What makes a quotation comparable Six details decide whether two offers can be compared at all: - Material and hydrate. Trisodium citrate dihydrate, CAS 6132-04-3, with the hydrate written into the name. - Specification. Assay and its basis, sodium, water, pH, particle size, heavy metals and microbiology. - Quantity and pack. Pouch, drum, or a crystal or granulated grade. - Destination and Incoterm. Country, port or address, and the trade term. - Documents. Certificate, specification, safety data sheet and the statements the importer needs. - Route and market. Supplement, additive or another use, and where it will be sold. An offer that omits the hydrate or the route cannot be compared with one that includes them, because the two may not describe the same purchase. Commercial terms are not printed on this page; they belong in the quotation. ## The sample has to be a lot The 1 kg pouch is the qualification sample. Check infrared identity, titration, Karl Fischer water, pH and microbiology before scale-up, then hold back a retained sample from the same pouch. The lot code on the pouch, the certificate and the quotation should be one string. A sample with no lot behind it is a demonstration, not a qualification. For a smaller bench quantity, agree it before ordering. A bench quantity split out of a bulk lot is a repack, with traceability of its own, and it is not the catalog pouch; the paperwork should say so. The bench sample and the production drum should not be assumed to come from the same batch. ## Terms to settle before the first order Commercial conditions, trade term, pack, delivery window and paperwork are all in the quotation. The quality terms sit alongside: the specification revision, the certificate that comes with each lot, the retained sample, the retest period and the route for a change. Settle those before the first production order rather than after the first disagreement. Returns and replacements are governed by the quotation and the quality agreement. When a lot misses the agreed specification, the retained sample and a joint re-test decide it, not a photograph of a lump. Agree who pays for the referee laboratory and which one both sides accept. For the specification itself, see the product hub; the release tests are listed on the COA page; the market file is on the compliance page; shipping and documents are covered on the logistics page; the release workflow is on the quality page. ### 05 The regulatory file for sodium citrate dihydrate URL: https://nutrition.rainwoodbio.com/products/minerals/sodium-citrate/compliance/ Reviewed: 2026-11-19 Sodium citrate dihydrate can enter a market by more than one route: as a food additive, as a source of the nutrient sodium in a food supplement, or as a general food ingredient. Each route carries its own limits, its own label wording and its own documents, and the same drum can be inside one file and outside another. The catalog specification describes the powder; the regulatory file shows the route. The buyer's regulatory team confirms that route for the destination, and this page lists what belongs in the file. In one lineThe specification describes the powder, the route decides the limits and the label, and the buyer's regulatory team confirms the route for the destination. ## The shape of the file Four questions shape the file. What exactly is the material, and which revision of the specification is on the order? Which lot is being released, and what did its certificate measure? Which limits and which label rules govern the finished product in that market? And what would force a review — a new source, a new process, a new pack? The certificate answers the second, the technical data sheet the first, the safety data sheet the handling; none of the three answers the market question. The material is named with its hydrate. Trisodium citrate dihydrate, CAS 6132-04-3, is a different article from the anhydrous salt, and a file that names only “sodium citrate” has not identified what is being placed on the market. The additive and nutrient routes may both be open to the same powder, but they use different legal instruments and different label entries. ## European Union General food law, the additives framework and the food-supplement rules sit alongside each other. Trisodium citrate is listed in the additives framework as E331(iii), within the “sodium citrates” group; the group also covers the mono- and disodium forms. Used as an additive, it carries an E-number and the maximum levels of that framework. Used as a sodium source in a food supplement, it is assessed under the food-supplement rules instead, and the form and the purpose decide which entry applies. The buyer's regulatory team confirms which route the finished product uses, checks the current consolidated text, and verifies that the sodium source is listed in the form that is bought. Labelling follows the general food-labelling rules: sodium is declared in mg, and the salt equivalent is sodium × 2.5. The reference intake for sodium is 800 mg, so one gram of the dihydrate, at 235 mg of sodium, is about 29% of that reference. Contaminants are checked against the current contaminants regulation for the food category, as of this review. ## United States Two routes are also possible. As a dietary ingredient, the material is named on the Supplement Facts panel and in the ingredient list, and the buyer confirms the basis on which the ingredient is marketed, including whether a notification is needed for the form and the use. As a food ingredient, the buyer confirms the basis it relies on for that use. The seller's file supports the material and the lot; it does not choose the route. The label arithmetic is the US version of the same sum. Sodium is declared in mg with the percentage of the 2,300 mg daily value; one gram of the dihydrate provides about 10%. The ingredient list names “sodium citrate”. A structure/function statement, if any, is the brand's wording, its disclaimer and its notification, not a property of the ingredient. ## Limits to confirm for the finished product The values below are the reference points a supplement file usually starts from. The current destination text, the category and the daily dose decide the final limit, and the additive route can set a different one. Reference limits and nutrient figures · sodium citrate dihydrate | Parameter | Reference | What the file should show | Lead | 3.0 mg/kg in the supplement | Lot result, method and limit | Cadmium | 1.0 mg/kg in the supplement | The result and any exception for the category | Mercury | 0.10 mg/kg in the supplement | Lot result and method | Arsenic | Customer or market limit | The agreed limit and the method | Sodium, EU reference intake | 800 mg/day | The sodium per portion and the salt equivalent | Chloride | Agreed limit, where the route sets one | A measured figure on the certificate The sodium row is a nutrient declaration, not a contaminant limit, and it is the row that most often changes a formulation. A product that carries a meaningful sodium dose from this salt cannot also carry a low-sodium claim without the reviewer checking the claim conditions against the portion. ## Claims and label wording Only nutrition and health claims permitted for the destination may be used, and each has a fixed wording and condition. The brand's reviewer checks the claim against the current register and the portion, and keeps the evidence with the label file. No disease-related claim is made for this ingredient, and none should be inferred from the chemistry: the alkalinity of the solution and the metabolism of citrate are material properties, not permitted claims. The label name follows the route. An additive use may appear as “sodium citrates (E331)” or as the specific salt, depending on the market and the function; a supplement use names “sodium citrate” in the ingredient list and declares the sodium in the nutrition panel. A certificate is not a claim approval, and a claim approval does not rewrite the specification. ## Documents for the file - Specification with a version number, naming the hydrate, CAS number and assay basis. - Certificate of analysis for the lot, with methods, limits and results. - Technical data sheet and safety data sheet. - Heavy-metal and microbiology results, with the method and the detection limit. - Allergen, GMO, origin and residual-solvent statements. - Chloride statement where the route or the customer sets a limit. - Change-control record for the source, the process and the pack. ## Checklist before the first order - The hydrate, the CAS number and the specification revision are named in the quotation. - The route — additive, nutrient source or food ingredient — is confirmed by the buyer's team. - Each contaminant result is expressed against the finished-product dose. - The sodium and salt figures on the label are calculated from the same assay basis as the certificate. - The claim wording and the ingredient name have been reviewed for the destination. - COA, TDS, SDS and the statements are on file and refer to the same version. Catalog ranges are published on the product hub. The COA page explains how to read the lot certificate, the identity page sets out the analytical evidence, the methods library describes the tests, and the quality page describes the release file. ### 06 How we prove a sodium citrate lot is the trisodium dihydrate URL: https://nutrition.rainwoodbio.com/products/minerals/sodium-citrate/identity/ Reviewed: 2026-11-19 A sodium citrate lot is trisodium citrate dihydrate when five measurements agree: the document names the hydrate and the CAS number, the infrared spectrum matches the reference and the citrate reaction is positive, the sodium figure sits near 23.45%, the water result sits near 12.25%, and the titration gives 99.0–100.5% on the anhydrous basis. The assay alone cannot separate the dihydrate from the anhydrous salt, from disodium citrate, or from a blend with sodium chloride. The sodium-to-citrate ratio is the measurement that can. In one lineThree sodium ions per citrate set the identity: 23.45% sodium, 64.3% citrate and 12.25% water is one salt, and a departure from that ratio points to a different cation count or an added salt. ## Five layers of identity Each layer answers a different question, and a supplier who answers only the first has described the paperwork rather than the powder. The order matters: the document says what the lot is claimed to be, the spectrum says the anion, the sodium says the cation count, the water says the hydrate, and the mass balance says whether the numbers describe one material. Five layers of sodium citrate dihydrate identity | Layer | The question it answers | Test | Evidence it gives | Document | Is the hydrate named? | Name, CAS number, formula | Paperwork only | Citrate | Is the anion citrate? | Infrared spectrum; citrate reaction | The anion, not the cation | Sodium | Is it the trisodium salt? | Sodium by ICP-OES, or calculated from the assay | The cation count | Water | Is it the dihydrate? | Karl Fischer | The hydrate state | Mass balance | Does it add up? | Assay, sodium, water, chloride | Dilution and added salts ## The sodium-to-citrate ratio Trisodium citrate has three sodium ions for one citrate anion. In the dihydrate that is 68.97 g of sodium and 189.10 g of citrate in 294.10 g of salt, or 23.45% sodium, 64.30% citrate and 12.25% water. Convert a result to moles per 100 g and the ratio should come out near 3.00. A lot at 23.3% sodium and 64.0% citrate gives 1.0135 mol of sodium and 0.3384 mol of citrate, a ratio of 2.99. The ratio is what separates the neighbouring salts. Disodium citrate carries two sodium per citrate, about 19.47% sodium in the anhydrous salt, and a ratio near 2. Monosodium citrate carries one, about 10.74%, and a ratio near 1. Both are legitimate articles with their own CAS numbers; neither is the trisodium salt, and a certificate that reports only “citrate” will not tell them apart. Added salts move the ratio in the other direction. A blend of 90% dihydrate and 10% sodium chloride reports about 25.0% sodium, 57.9% citrate and a ratio near 3.56, and the chloride line confirms it. Added citric acid reports more citrate and less sodium, a ratio below 3.0, and a lower solution pH. An inert diluent leaves the ratio at 3.0 and lowers the assay, which is why the ratio and the mass balance are read together. ## X-ray diffraction and the solid state X-ray diffraction reads the crystal rather than the solution. The dihydrate has its own pattern, the anhydrous salt has a different one, and the scan therefore settles a hydrate dispute that a water result alone can only suggest. It also shows a crystalline second phase: sodium chloride as halite gives strong reflections near 31.7° and 45.4° two-theta with copper radiation, well clear of the citrate pattern. XRD is not a release test for this product. Use it when the hydrate state is disputed, when a supplier changes its drying step, or when a crystalline chloride or carbonate is suspected. Ask for the reference pattern the lot was compared against and for the detection limit; a scan reported as “matches” without either is a statement, not a result. An amorphous spray-dried material will not give sharp reflections at all, which is itself useful information. ## What adulteration looks like Common sodium citrate substitutions and the signals | Substitute | Effect on the lot | What shows it | Test | Sodium chloride | Common sodium salt; no citrate | Ratio above 3.0; chloride present; salty taste | Chloride by titration or IC; sodium | Citric acid | Adds citrate; removes sodium | Ratio below 3.0; pH falls | Sodium and citrate; pH | Disodium or monosodium citrate | Lower cation count; lower pH | Ratio near 2 or 1 | Sodium; pH; XRD | Dextrose or maltodextrin | Dilution; assay falls | Ratio near 3.0; assay low | Assay; reducing-sugar test; XRD | Water | Dilutes the as-is assay | Karl Fischer above 13.0% | Karl Fischer; anhydrous assay | Sodium bicarbonate | Raises sodium and pH | Effervescence in acid; ratio above 3.0 | Acid test; XRD; sodium Colour and appearance are the weakest signals: a white crystalline powder is easy to match. The stronger evidence is the ratio, the chloride line and the water result, read together. A certificate that reports appearance and assay but no sodium or chloride figure leaves the likeliest substitution unexamined. ## Writing identity into the specification - “Trisodium citrate dihydrate, C6H5Na3O7·2H2O, CAS 6132-04-3.” - “Assay 99.0–100.5% by titration on the anhydrous basis; water 11.0–13.0% by Karl Fischer.” - “Sodium 22.5–24.0% as weighed; report the sodium:citrate ratio where the form is in question.” - “Identification by infrared spectrum against a reference, plus the citrate reaction.” - “Chloride limit stated, with the method, where the route or the customer sets one.” - “No added sodium chloride, citric acid or other citrate salt.” ## Questions that expose the form - Which hydrate is on the certificate, and what water result and method does it report? - What sodium figure is reported, and was it measured or calculated? - Can you send the infrared spectrum, with the reference it was matched to? - Does the sodium:citrate ratio agree with the trisodium salt, and can you show the working? - Is any chloride, other citrate salt or diluent present, and what backs that answer? Five straight answers are an identity file; a single assay figure is not. Catalog ranges are published on the product hub, and the COA page places each figure on the certificate. The grades page compares the hydrate states, the chloride comparison covers the substitution that the ratio detects, and the methods library describes the spectra and the titration. ### 01 Sodium molybdate COA: the assay, the molybdenum and the hydrate URL: https://nutrition.rainwoodbio.com/products/minerals/sodium-molybdate/coa/ Reviewed: 2026-11-19 On a sodium molybdate lot, the certificate carries two potency statements and a set of supporting checks: the HPLC assay describes the salt, the complexometric titration describes the element, and appearance, identity, moisture, contaminants, microbiology and mesh describe the rest. Each line needs its method, its release limit and the measured result in its own column. The ranges here are the catalog specification; the batch COA confirms a particular pack. In one lineThe certificate has to reconcile two numbers: the salt assay and the elemental molybdenum, with the loss on drying showing which hydrate was packed. ## The certificate as a test report A certificate earns its place when a reviewer can audit it line by line: what was measured, how, and against which limit. A row that says only “conforms” records a conclusion but withholds the evidence. Sodium molybdate makes that sharp, because salt percentage and molybdenum percentage are different measurements; printing one of them describes half the material. The identity row decides whether the powder is sodium molybdate. The molybdenum row decides how much of the element the lot carries. The loss on drying decides which hydrate was packed, and it is the line most often left to a footnote. Identity, assay, moisture and contaminants · sodium molybdate | Parameter | Method | Release limit | Appearance | Visual | White crystalline powder | Identification | Infrared and HPLC | Conforms to the reference | Assay | HPLC | 99.0–101.0% | Molybdenum (Mo) | Complexometric titration | 45.0–47.0% | Loss on drying | Gravimetric | ≤1.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh ## Assay, molybdenum and the basis The two potency rows measure different things. The assay describes the salt; the molybdenum figure describes the element. Sodium molybdate, Na2MoO4, is 46.6% molybdenum by mass, so a 99.0–101.0% assay maps onto roughly 46.1–47.1% molybdenum. The catalog range of 45.0–47.0% is close to that arithmetic but not identical; a certificate that pairs a molybdenum figure near 45.0% with an assay near 101.0% deserves a question about the basis, or about what the assay measured. The basis must be printed in the row. A result on the dried basis and a result as-is differ by the loss on drying, capped at 1.0% here. A lot at 99.2% as-is with 0.7% moisture is 99.9% on the dried basis; small, but it is the difference between a value inside the range and one at its edge, and a reviewer cannot reconstruct it unless the basis is named. The hydrate check protects the purchase. The anhydrous salt carries 46.6% molybdenum and about 22.3% sodium; the dihydrate, Na2MoO4·2H2O, carries 39.7% molybdenum and loses 14.9% on drying. A lot with a loss on drying near 15% is the dihydrate, whatever the heading says, and it cannot meet the ≤1.0% limit. The molybdenum figure and the moisture result confirm each other. ## Release limit versus batch result The limit is the boundary; the result is what the laboratory measured. The two belong in separate columns, with the method beside them. A result column filled with the specification range is a copy of the gate, not a record of the lot. What the result column should contain | Parameter | Release limit | Result column | Assay | 99.0–101.0% | A measured percentage with the basis stated | Molybdenum | 45.0–47.0% | A measured percentage by titration, with the calculation | Loss on drying | ≤1.0% | A measured percentage | Heavy metals | Per element | A figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot For heavy metals the evidence is a figure per element. A single total hides the element that matters, and a “not detected” line without the method's detection limit says more about the laboratory than about the powder. The molybdenum row should show the titration calculation or the chromatogram behind the number. ## What moves between batches Crystallisation and drying move the moisture, the crystal size and the colour. Milling and sieving move the particle-size result, which can change when the mill or the screen changes without any change in the chemistry. The 40 mesh figure is a finishing specification, not an identity test. Colour is the least quantitative line and often the most revealing. White to off-white is a wide window; a yellow tint can point to molybdenum trioxide, an iron trace or a hot drying step while the assay still reads inside the range. Ask for the batch record before rejecting a lot on colour alone, and ask whether the yellow material dissolves: molybdenum trioxide does not. A trend across lots says more than one result near an edge. If the assay holds at 100% while the molybdenum figure drifts toward 45.0%, the rows are either on different bases or describing different powders. The lot code on the certificate should match the pouch, the drum and the retained sample. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a hydrate claim the supplier's certificate does not prove, or a disputed result. The useful panel is not a repeat of the whole certificate: molybdenum by titration or ICP-OES, sodium by ICP-OES to confirm the salt, loss on drying, X-ray diffraction for the anhydrous pattern, and ICP-MS for the heavy metals, with tungsten reported separately. Recycled catalyst is a real source of molybdenum salts, and it can carry cobalt, nickel, vanadium and tungsten into a material that still meets a molybdenum assay. If the source is not stated, ask for a full metal scan and the detection limit of each element. A “not detected” statement without a limit is evidence about the method's sensitivity, not about the sample. Chain of custody matters. The sample tested should be the sample retained, and the report should name the lot. When a result is contested, give the referee the retained sample, the supplier's certificate and the specification, and ask for the tests that separate the hydrate and the salt, not a repeat of the same assay. ## What to compare between suppliers Put six lines side by side: the hydrate state and CAS number; the assay result and its basis; the molybdenum result; the loss on drying; the heavy-metal panel including tungsten; and the pack, lot code and retained sample. Two quotations that agree on assay but differ on hydrate or molybdenum are not describing the same powder. The second layer is traceability. The certificate should say who manufactured the lot, which molybdenum source was used, and which drying and milling steps were applied. The catalog specification sits on the sodium molybdate product page. The tests that separate the hydrate from the anhydrous salt are on the identity page; the market conditions are on the compliance page; the titration is described in the complexometric method note; the release workflow is on the quality page. ### 02 Sodium molybdate grades: anhydrous, dihydrate and the mesh URL: https://nutrition.rainwoodbio.com/products/minerals/sodium-molybdate/grades/ Reviewed: 2026-11-19 Sodium molybdate is supplied as the anhydrous salt or the dihydrate, and as a 40 mesh powder, a granulate or a diluted blend. The hydrate sets the molybdenum figure per gram — about 46.6% for the anhydrous salt and 39.7% for the dihydrate — so the grade choice is a dose and label decision before it is a flow decision. In one lineThe grade decision is the hydrate state and the particle form: they set the molybdenum figure per gram, the water limit and how the powder behaves in a blend. ## Why one name covers several grades The catalog form is the anhydrous salt, Na2MoO4, as a 40 mesh powder with a loss on drying of 1.0% or less. The dihydrate, Na2MoO4·2H2O, is the form most often seen in commerce, and it carries less molybdenum per gram because the water of crystallisation is part of the weighed mass. Both are called sodium molybdate. Only the CAS number and the molybdenum figure separate them. Particle form is the second decision. A fine powder blends evenly but can dust and cake; a granulate flows better and wets more slowly; a diluted blend makes a very small dose weighable. None of these changes the salt chemistry, but each changes the specification line, the label and the weighing step. ## The grades side by side Sodium molybdate grades compared | Property | Anhydrous | Dihydrate | Diluted blend | CAS number | 10141-05-6 | 10102-40-6 | Salt CAS plus a named carrier | Formula | Na2MoO4 | Na2MoO4·2H2O | Salt plus carrier | Molar mass | 205.92 | 241.95 | — | Molybdenum | 45.0–47.0% (theoretical 46.6%) | About 39.7% | By declaration | Water | Loss on drying ≤1.0% | About 14.9% water of crystallisation | Carrier-dependent | Appearance | White crystalline powder | White crystals or powder | White to off-white powder | Usual role | Capsules, tablets, dry blends | Bulk chemical use; not the catalog grade | Low-dose blending The two CAS numbers are a purchase-order issue. An order that says sodium molybdate without the hydrate and the CAS has not specified the material, and the molybdenum result is the fastest way to see which one arrived. For the same weight, the dihydrate delivers about 15% less molybdenum than the anhydrous salt, which is enough to move a label claim. ## Powder, granulate and solution behaviour The anhydrous powder is freely soluble in water and gives a solution that is neutral to slightly alkaline. It is also hygroscopic: an opened pouch takes up moisture, the loss on drying rises and the powder can cake. The dihydrate is the more hydrated form and does not pick up water in the same way, but it cannot meet the ≤1.0% loss-on-drying line of the catalog grade. At 40 mesh the powder is fine enough to blend into a dry mix and coarse enough to handle without excessive dust. A granulated grade is supplied on request for flow and dust control; it should still be specified by mesh, because granulated is a process word, not a particle-size result. A diluted blend adds a carrier, and that carrier is an ingredient on the label and a variable in the assay. Solution pH deserves a line in the specification if the material is used in a liquid. At neutral to slightly alkaline pH the molybdate ion stays in its simple form; as the pH falls, it condenses into polymolybdates, and the behaviour of the solution changes. The powder grade does not fix that risk, but the formulator should know it before choosing a matrix. ## Dose arithmetic and the fill The label declares elemental molybdenum, so the salt mass per dose is the declared figure divided by the molybdenum fraction. The table uses the theoretical figures; a batch works from its certificate result. Salt mass needed for a target molybdenum dose | Elemental molybdenum | Anhydrous salt | Dihydrate salt | 50 µg | About 107 µg | About 126 µg | 100 µg | About 215 µg | About 252 µg | 500 µg | About 1,073 µg | About 1,261 µg The EU nutrient reference value for molybdenum is 50 µg and the US Daily Value is 45 µg, so a 100 µg dose is roughly twice either reference. The EU upper level for adults is 600 µg a day, which a 500 µg supplement approaches once the diet is counted; the total intake, not the capsule alone, is the number to review. At these masses the salt is a minor part of any capsule. A 100 µg dose is about 215 µg of anhydrous salt, which is 0.04% of a 500 mg fill. Direct weighing at that ratio is not practical, so the grade that matters is often a trituration: a 1% blend puts 21.5 mg of powder in the capsule, and a 0.1% blend puts 215 mg. The carrier, the blend uniformity and the label all follow that choice. ## What to write into the specification - “Sodium molybdate, anhydrous, CAS 10141-05-6, Na2MoO4.” - “Assay 99.0–101.0% by HPLC; molybdenum 45.0–47.0% by complexometric titration.” - “Loss on drying ≤1.0%; identification by infrared and HPLC.” - “Particle size ≥95% through 40 mesh; granulated grade by agreement.” - “Heavy metals and microbiology as listed; sodium about 22.3% where the salt form is checked.” - “Hydrate state, carrier and dilution ratio named whenever the grade is not the anhydrous powder.” A specification that names only sodium molybdate leaves the hydrate, the mesh and the carrier open. Those three lines decide the molybdenum per gram, the flow and the label, so they belong in the specification rather than in an email. ## When the other grade is the wrong choice If the label declares the anhydrous salt, the dihydrate is not a drop-in: the mass changes and the declared molybdenum no longer matches the weigh-up. If the formula is a dry blend that will be stored open, the hygroscopic anhydrous powder needs a pack that keeps moisture out, and a granulate may handle better. If the market file or the label does not accept the carrier, a diluted blend is the wrong route however convenient the weighing becomes. The grade is part of the product identity, not a packing preference. The catalog specification sits on the sodium molybdate product page. The salt and the chelate are compared on the level-four page; the certificate lines are explained on the COA page; the moisture and pack questions are on the stability page; the diffraction check that separates the hydrates is described in the XRD method note. ### 02.1 Sodium molybdate vs molybdenum glycinate: the salt, the molybdenum and the fill URL: https://nutrition.rainwoodbio.com/products/minerals/sodium-molybdate/grades/sodium-molybdate-vs-glycinate/ Reviewed: 2026-11-19 Sodium molybdate is an inorganic salt that carries about 46% elemental molybdenum; molybdenum glycinate is a chelate whose molybdenum figure is declared by its supplier and usually sits in the low single digits. For the same molybdenum dose the chelate weighs roughly fifteen to twenty times more, which changes the blend step, the label and, at higher doses, the fill. In one lineThe salt carries about 46% molybdenum and the glycinate a few percent, so a switch changes the mass per dose, the blend step and the ingredient name rather than only the powder. ## Two different material classes Sodium molybdate is an ionic salt with a fixed formula, Na2MoO4, a fixed molar mass and a molybdenum figure that follows from the formula. It dissolves freely in water and is assayed as a salt. Molybdenum glycinate, often described as a bisglycinate chelate, binds molybdenum to glycine; the commercial material is a chelate on a carrier, and its molybdenum content is a declared assay rather than a formula constant. That difference decides how each material is specified. The salt can be bought against a CAS number, a stoichiometric molybdenum range and a loss-on-drying limit. The chelate has to be bought against the supplier's declared molybdenum figure, the ligand and carrier, and the method used to measure the element. The word glycinate does not fix the assay, and the word molybdate does not fix the hydrate. ## The two forms side by side Sodium molybdate against molybdenum glycinate | Property | Sodium molybdate | Molybdenum glycinate | Chemical type | Inorganic salt | Amino-acid chelate | CAS number | 10141-05-6 (anhydrous) | — (supplier-specific material) | Formula | Na2MoO4 | Not a single stoichiometric formula | Molybdenum | 45.0–47.0% | Declared; low single digits typical | Sodium | About 22.3% | None from the chelate | Water solubility | Freely soluble | Carrier- and chelate-dependent | Release assay | HPLC and complexometric titration | Supplier method, usually total molybdenum | Label name | Sodium molybdate | Molybdenum glycinate chelate The CAS row is a purchasing issue. The salt has one CAS number for the anhydrous form and another for the dihydrate, and either one can be specified. The chelate is a trade material, so its certificate, not its name, carries the molybdenum figure. An order that names molybdenum glycinate without a molybdenum specification has not fixed the material. ## The molybdenum figure and the dose The label declares elemental molybdenum, so the compound mass per dose is the declared figure divided by the molybdenum fraction. The salt's fraction is fixed at about 46.6%; the chelate's comes from its certificate. The table uses 2.5% and 5% as examples of commercial chelate figures; the certificate replaces the example. Compound mass for a target molybdenum dose | Elemental molybdenum | Sodium molybdate (46.6%) | Glycinate at 2.5% | Glycinate at 5% | 50 µg | About 107 µg | About 2.0 mg | About 1.0 mg | 100 µg | About 215 µg | About 4.0 mg | About 2.0 mg | 500 µg | About 1,073 µg | About 20 mg | About 10 mg At 100 µg the salt is 215 µg of powder and a 2.5% chelate is 4 mg: an eighteen-fold difference. At 500 µg the salt is about 1.07 mg and the same chelate is 20 mg. The elemental dose is identical, but the weighing range, the premix ratio and the label declaration are not. A formulation copied from one form to the other without redoing that arithmetic will miss the declared dose. ## The fill and the blend At these masses the molybdenum source is a minor part of a capsule. A 500 mg fill holds 215 µg of salt for a 100 µg dose, which is 0.04% of the fill, or 4 mg of a 2.5% chelate, which is 0.8%. Neither form fills the capsule, and the capsule size is normally set by the other ingredients. The switch changes the premix, not the fill weight. Blend uniformity is the real constraint. A 0.04% ingredient cannot be weighed into each capsule, so the salt is usually handled as a trituration or a granulated dilution; a 1% salt blend puts 21.5 mg in the capsule for a 100 µg dose. The chelate can be blended at 0.8% directly in some processes, but it still needs a premix for a production batch. The premix carrier, the dilution ratio and the uniformity data all change with the form. At higher doses the fill does move. A 500 µg dose is 1.07 mg of salt but 20 mg of a 2.5% chelate; at a multi-milligram dose the chelate starts to take real space in the capsule. The salt also brings sodium: 1.07 mg of salt carries about 0.24 mg of sodium, which is small against a diet but is part of the ingredient line. The same low-dose blending question appears with sodium selenite and copper gluconate, where the elemental figure, not the compound weight, sets the premix. ## The label and the permitted form The ingredient line has to name the material that was weighed. Sodium molybdate and molybdenum glycinate chelate are different declarations, and a change of source is a label change even when the elemental molybdenum figure is adjusted to match. The sodium contribution belongs on the label with the salt and not with the chelate. The destination's permitted-forms list is the second check. The salt name and the chelate name are separate entries or separate questions, and the buyer's regulatory team confirms that the form on the label appears on the current list for the market. A file written around one form does not automatically cover the other, and an assay result does not settle a labelling question. This page makes no disease-related claim for either form. The claim review is separate from the identity of the ingredient, and it is done by the brand's regulatory reviewer for the finished product and the market. ## When to choose which Choose the salt when the specification should be fixed by a formula and a CAS number, when the dose is small enough that the powder mass is irrelevant, and when the label names the inorganic salt. It is the catalog form here: anhydrous sodium molybdate, 45.0–47.0% molybdenum, freely soluble, with a defined release assay. The product hub carries that specification, and the grades page covers the hydrate and mesh choices. Choose the chelate when the formula or the label calls for a chelate and the market file covers that form. Specify the molybdenum figure, the ligand and carrier, the assay method and the particle size, and check the permitted-form list before the label is written. A switch in either direction needs a written change control, a new specification and a label review. The analytical methods that separate the forms are set out in the methods library; the release and retention workflow is on the quality page. Neither form is a drop-in for the other, and the molybdenum figure is the number that makes the difference visible. ### 03 Sodium molybdate stability: moisture, pH and the pack URL: https://nutrition.rainwoodbio.com/products/minerals/sodium-molybdate/stability/ Reviewed: 2026-11-19 Sodium molybdate is stable as a dry crystalline salt in a sealed pack. Its vulnerabilities are moisture pickup by the anhydrous powder, acidification of a solution (which forms polymolybdates) and reducing agents that change the colour and the oxidation state. The pack and the matrix set the shelf life, not the certificate. In one lineThe dry salt is stable in a sealed pack; moisture, low pH and reducing agents are what change the powder or the solution. ## The powder: moisture, caking and colour The catalog limits loss on drying to 1.0%, and that is a release gate rather than a storage allowance. The anhydrous salt is hygroscopic. Once the foil pouch is opened, moisture from the air is taken up, the loss on drying rises, the as-is assay falls and the powder can cake into lumps that no longer blend evenly. The chemistry has not changed; the weighed portion has. A sealed pack at ambient warehouse temperature is the normal condition. Heat is a secondary concern for the solid, but a hot store with a daily temperature cycle makes the pack breathe, and each cycle carries moisture through a poor seal. The pack should be allowed to equilibrate before opening after cold storage, so that condensation does not form on the powder. Light is not the primary failure mode for this salt, unlike some other trace minerals, but a white powder that yellows in a clear container is telling you something. Keep the material in its original opaque or foil pack, and investigate a colour shift rather than assuming it is cosmetic. ## The solution: pH and the reducing partner Sodium molybdate dissolves freely in water to give a neutral to slightly alkaline solution. In that range the molybdate ion is stable. As the pH falls below about 6, it condenses into polymolybdates, and the solution's behaviour changes: the species in the bottle is no longer the simple salt that was weighed. A formulator who adds an acidulant without checking the final pH can move the molybdenum into a different chemical form while the label still says sodium molybdate. Reducing agents are the second risk. Molybdenum in the salt is in the +6 state; a reducing partner can take it to +5, and the solution turns blue. Ascorbic acid, reducing sugars and some plant extracts are the usual partners in a supplement matrix. A blue tint in a molybdenum premix is not a batch variation to be accepted; it is a chemical change, and the hold time and the pH should be revalidated before the formula is scaled. Heat accelerates both reactions. A hot-fill or pasteurisation step adds a heat load that a dry blend never sees, and the hold time before filling becomes part of the stability question. The dry powder is the practical format for most products at this dose; a liquid needs its own data. ## What drives change Factors that move sodium molybdate during storage | Factor | What it does | Control | Moisture | Raises loss on drying; cakes the powder; lowers the as-is assay | Sealed foil pouch; desiccant where needed | Low pH | Forms polymolybdates; changes the solution species | Keep the matrix neutral to slightly alkaline | Reducing agents | Mo(VI) to Mo(V); blue colour; potency changes | Separate from ascorbic acid and reducing sugars, or validate the matrix | Heat | Accelerates moisture cycling and solution reactions | Controlled store; cool process; validated hold time | Light | Minor for the solid; colour and solution drift | Opaque or foil pack; dark store These factors interact. A warm, humid store with an open pouch is worse than either condition alone, and an acidic, reducing solution combines the two chemical risks at once. The useful question is not whether sodium molybdate is stable in general, but whether it is stable in this pack, in this matrix, for this period. ## A stability protocol for the ingredient A protocol states the pack, the storage condition, the time points and the tests. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% relative humidity cover the warehouse; accelerated storage at 40 °C/75% relative humidity stresses the pack. For a liquid, add an arm at the formula pH and a second arm with the reducing partner present, because the ingredient alone will not show the reaction. Test the assay by HPLC, the molybdenum figure by titration, loss on drying, appearance, pH of a standard solution and identity at each point. Report the individual results rather than a pass statement, and identify the pack and the lot family. The molybdenum figure is the more robust potency line: it does not move when the powder takes up water, while the as-is salt assay does. Reading the two together separates a moisture problem from a chemistry problem. ## The finished formula changes the answer A capsule or tablet has low water activity, but the excipients and the shell can still transfer moisture. Check loss on drying at release and after storage, and check the appearance of the fill. A stick pack depends on the seal and the foil; a pinhole is a failure, and the strip should be inspected, not only the powder. A liquid combines pH, reducing agents and heat. The ingredient's bulk stability is the starting point, not the answer. If the formula includes vitamin C or a fruit extract, test the combination rather than the molybdate alone, and decide the hold time from that result. An overage is a formulator's decision; it does not repair a matrix that changes the oxidation state. ## How the shelf life is set We do not publish a single shelf-life number for sodium molybdate, because the pack and the storage condition set it. The assigned retest period belongs on the specification and is supported by the stability file for that pack. A number without a pack, a condition and a test panel is not a shelf life. After the retest period, re-assay the retained sample before extending use. Do not extend by assumption, and do not carry a bulk figure across to a repacked pouch. The product hub lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the HPLC note describes the assay; the quality page describes the release workflow. ### 04 Sodium molybdate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/sodium-molybdate/moq/ Reviewed: 2026-11-19 The smallest order for sodium molybdate is 1 kg in a foil pouch; the production pack is a 25 kg fiber drum, and the standard lead time is 1–7 days. To turn that into a quotation, send the hydrate and CAS number, the molybdenum figure, the pack, the destination and Incoterm, the documents you need and the intended use. In one lineOne kilogram is the minimum because it is the smallest pack that carries a lot code, a retention sample and a certificate of its own. ## A kilogram is a lot, not a dose count At 46.6% molybdenum, 1 kg of the anhydrous salt holds about 466 g of the element, or 4.66 million doses at 100 µg. The minimum is not sized to a project's dose count; it is the smallest unit that can be sampled, released and traced without splitting a larger batch. Anything below that is normally a repack from a bulk lot. A repack adds a handling step and breaks the chain between the pouch, the certificate and the retained sample. The 25 kg drum goes the other way: less handling per kilogram, but it commits inventory and starts a retest clock. A microgram-dose project may not consume a drum before that clock runs out, so the pack should follow the project, not the unit size. ## Packs and formats Standard sodium molybdate packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; close it after opening | Fiber drum | 25 kg | Production | Inner liner; one lot code on drum and liner | Granulated powder | On request | Flow and dust control | Mesh to be agreed The catalog powder is 40 mesh. A granulated version changes the particle profile, so it is quoted as a specification change rather than a packing preference. A diluted blend is not a catalog pack: it is a separate development item with its own carrier, assay per gram and label. ## Lead time and dispatch Standard packs leave within 1–7 days of order confirmation. That clock covers picking, paperwork and handover to the carrier; transit, customs and the customer's own release sit outside it. A granulated or custom pack needs its own date, and the quotation should show it separately. The dispatch date is the useful commitment, not the lead-time range. A pouch and a drum do not travel the same way, and the Incoterm decides who books the parcel or the pallet and who clears the entry. The documents should be in the same consignment as the lot. ## What a quotation needs Six details make an offer firm enough to compare: - The material. Sodium molybdate, with the hydrate and CAS number: 10141-05-6 anhydrous, 10102-40-6 dihydrate. - The release specification. Assay, molybdenum, moisture, mesh and the contaminant limits. - The pack and quantity. 1 kg pouch, 25 kg drum or an agreed granulation. - The destination and trade term. Country, delivery point and Incoterm. - The document set. COA, specification, SDS and any statement the importer needs. - The use and market. Supplement, food or another use, and where the finished product will be sold. Without the hydrate and the molybdenum figure an offer cannot be compared with another. Both belong in the quotation, because both feed the label arithmetic. ## The sample is a lot, not a demonstration The 1 kg pouch doubles as the qualification sample: identity, assay, molybdenum, moisture and microbiology can all be run from it, and a retention sample can be held from the same lot. The lot code should repeat on the pouch, the COA and the quotation. A bench trial may need less than a kilogram. Ask before ordering: a split from a production lot is a repack with its own record, and it should not be presented as the catalog pack. The production drum and the bench sample are not guaranteed to be the same lot. ## Terms to settle before the first order The quotation covers commercial terms, the Incoterm, the pack, the lead time and the documents. The quality side belongs in a quality agreement: the specification revision, the COA per lot, the retention sample, the retest period and the change-notification route. Put the molybdenum figure and the hydrate in that agreement. They are the two lines that become the label, and a change in either is a change to the product. If a lot is rejected, the retained sample and a joint re-test decide the outcome, not a photograph of the powder. Agree in advance who pays for the referee laboratory and which one is acceptable to both sides. The catalog specification is on the product page; the release tests are on the COA page; the market files are on the compliance page; shipping and documents are covered by the logistics page; release and retention are described on the quality page. ### 05 The regulatory file for sodium molybdate URL: https://nutrition.rainwoodbio.com/products/minerals/sodium-molybdate/compliance/ Reviewed: 2026-11-19 Sodium molybdate reaches the market as a source of molybdenum, usually in supplements but sometimes in food. A usable file has to match the hydrate, the destination and the daily dose, and the importer's regulatory team owns the route decision. This page names the framework, the limits and the documents that belong in that file. In one lineThe specification describes the salt; the regulatory file establishes the route, the molybdenum limit and the label for the destination. ## What the file contains A usable file answers four things: the exact material and specification revision; the lot and its certificate; the limits and label rules for the finished product; and the change-control route for source, process or pack. The technical data sheet covers the first, the COA the second, the regulatory route the third, and only a written change procedure covers the fourth. Sodium molybdate can be approached as a supplement ingredient or as a substance added to food, and the two routes carry different documents and limits. The importer's team decides which one applies. This page does not assert that the material is authorised, notified or permitted in any market; it lists the framework and the evidence the file should hold. ## European Union The EU file starts from general food law and the food-supplement framework. The permitted forms of vitamins and minerals are listed for food supplements, and the salt name has to appear on the current list for the destination; the buyer's team checks the consolidated text rather than a summary. Labelling follows the EU rules, where molybdenum has a nutrient reference value of 50 µg, and the contaminant limits for food supplements are set in the contaminants regulation. Molybdenum itself is not covered by one harmonised maximum across every member state, so national limits and the upper level are checked for the destination. The Scientific Committee on Food set a tolerable upper intake level of 600 µg a day for adults, a figure that EFSA has carried forward; the file converts the product dose to elemental molybdenum before comparing it. The current texts are the reference, as of this review. ## United States The US file is built around the dietary-supplement route, the finished product and its label. Current good manufacturing practice, the Supplement Facts panel and the claim rules each apply on their own terms, and the supplier should be able to name the basis it relies on for the ingredient. If the intended use is a conventional food rather than a supplement, the additive route is a separate question and the buyer's team confirms it. The Daily Value for molybdenum used on US labels is 45 µg for adults and children four years and older, following the 2016 revision. The upper level for adults is 2,000 µg a day, from the Institute of Medicine. Those two numbers set the label percentage and the safety comparison; neither is a target dose, and the file should show the arithmetic from the salt figure to the elemental figure. ## Contaminants and the molybdenum figure The contaminant panel is a finished-product calculation, not only a drum result. The table is the usual starting point for a supplement file; the current destination text and the daily dose decide the final limit. Limits to confirm for the finished product | Parameter | Reference point | What the file shows | Molybdenum | EU upper level 600 µg/day; US upper level 2,000 µg/day | Elemental µg per serving and the total daily intake | Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method and finished-product calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception | Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result and method | Arsenic (As) | Market or customer limit | The agreed limit and the method The conversion is simple and often skipped: 1 mg of the anhydrous salt carries about 0.466 mg of molybdenum, so a 500 µg molybdenum dose is about 1.07 mg of salt. The file should carry the elemental figure, because that is the number the upper level and the label percentage refer to. A specification written only as salt weight cannot be compared with either. ## Label and claims The label names the ingredient in the form the destination requires, and the claim review is separate. In the EU, permitted health claims are listed with fixed wording and conditions, and the brand's reviewer confirms that the wording and the condition are met for the product. In the US, structure-function wording and the required disclaimer are reviewed on their own route. The certificate does not approve a claim, and a claim does not change the specification. The ingredient line has to match the material. Sodium molybdate, molybdenum glycinate and a diluted blend are different names on a label, and a switch between them is a label change even when the elemental molybdenum figure is adjusted to match. This page makes no disease-related claim for the ingredient or the finished product. ## Documents the file should hold For each lot: the certificate of analysis, the specification version it was released against, and the heavy-metal and microbiology results. For the material: the technical data sheet, the safety data sheet, the hydrate statement, the particle-size result and the molybdenum figure. For the market: the allergen, GMO, origin and residual-solvent statements, plus any customer-specific declaration. For change control: the source, the process and the pack, with a route for notifying a change. A document list with version numbers is more useful than a folder of undated files. Where a statement is not available for the lot, name the gap before the order rather than discovering it at the port. The certificate, the specification and the quotation should refer to the same version of the material. ## Checklist before the first order - Specification version, hydrate state and CAS number are named. - COA, TDS, SDS and the allergen, GMO, origin and residual-solvent statements are on file. - The molybdenum dose is converted to elemental µg and compared with the upper level. - The contaminant results are converted to the finished-product dose. - The label and the claim have been reviewed for the destination. - The source, process and pack are under change control. - The quotation, the specification and the certificate refer to the same version. The product hub carries the catalog specification; the identity page covers the analytical evidence; the COA page explains the lot certificate. The quality page describes the release file, and the EU regulatory notes and the US regulatory notes give the framework references. ### 06 How to prove a sodium molybdate lot is the anhydrous salt URL: https://nutrition.rainwoodbio.com/products/minerals/sodium-molybdate/identity/ Reviewed: 2026-11-19 A sodium molybdate lot is the anhydrous salt when the document names the hydrate and the CAS number, the molybdenum figure sits at 45–47%, sodium is near 22.3%, loss on drying is at or below 1.0% and the diffraction pattern matches the anhydrous reference. No single number proves it; the figures have to agree. In one lineIdentity is a set of agreeing figures: the molybdenum and sodium results fix the salt, the loss on drying fixes the hydrate, and the diffraction pattern fixes the solid form. ## The identity layers A certificate can carry the right name and still fail to prove the powder. The layers below are separate questions, and each one needs its own evidence. A supplier who answers the first has described the paperwork, not the material. Layers of sodium molybdate identity | Layer | Question | Test | What it proves | Document | Is the hydrate named? | Name, CAS number, formula | Paperwork only | Stoichiometry | Is the molybdenum figure right? | Complexometric titration or ICP-OES | The element, not the salt | Counter-ion | Is it the sodium salt? | Sodium by ICP-OES | The salt form | Hydrate | Anhydrous or dihydrate? | Loss on drying | The water of crystallisation | Solid form | Does the phase match? | X-ray diffraction and infrared | The crystalline reference The molybdenum figure alone cannot separate the salt from a blend or from a different molybdenum compound. The sodium figure alone cannot tell you how much molybdenum is present. The loss on drying alone cannot tell you whether the water is crystal water or surface moisture. Together they narrow the answer quickly. ## The molybdenum and sodium ratio Anhydrous sodium molybdate, Na2MoO4, is 46.6% molybdenum and 22.3% sodium by mass, a molar ratio of two sodium to one molybdenum. A certificate that reports 46.0% molybdenum should sit near 22.0% sodium; a sodium result around 20% points to a dilution, and a result above 23% points to another sodium salt or a sodium-bearing carrier. The ratio is a stronger identity check than either figure alone. It also catches a blend that the molybdenum assay would pass. A mixture of sodium molybdate and molybdenum trioxide, which is 66.7% molybdenum, can be built to land inside the 45–47% window while the sodium falls below the theoretical figure. The assay sees molybdenum; the counter-ion sees the salt. This is why the sodium test is worth ordering for a new source even though it is not a routine release line. Reconcile the two potency rows as well. A 99.0% salt assay at the theoretical 46.6% molybdenum gives 46.1% molybdenum; a 101.0% assay gives 47.1%. A lot whose assay and molybdenum sit at opposite edges of their ranges is describing two different things, and the basis is the first place to look. ## X-ray diffraction and the solid form X-ray diffraction answers the question that the chemical assays cannot: which crystalline phase is in the drum. The anhydrous salt and the dihydrate give different patterns, so a diffraction scan separates them directly, without inferring the hydrate from the moisture figure. For a disputed lot, the pattern is the cleanest evidence of what was packed. Infrared, the catalog identification method, also carries hydrate information: the O-H stretching region shows whether water of crystallisation is present, and the molybdate bands confirm the anion. Infrared is a good release identity test, but it is less direct than diffraction when the question is the phase. Ask for the reference pattern and the detection limit before accepting a match statement; a report that says only “XRD conforms” has added little. Diffraction is not a purity assay. It will not report the molybdenum percentage, the sodium percentage or a trace metal, and an amorphous impurity can sit outside the pattern. Use it with the chemical figures, not instead of them. ## What adulteration looks like Substitutions and the signals that expose them | Adulterant | What it does | Signal | Test | Dihydrate sold as anhydrous | Waters the salt; lowers molybdenum per gram | Loss on drying near 15%; molybdenum near 39.7% | Loss on drying, molybdenum, XRD | Molybdenum trioxide | Raises molybdenum above the range; insoluble | Residue in water; sodium below 22% | Solubility, sodium, XRD | Sodium tungstate | Same group; similar white salt | Tungsten by ICP-MS; mass balance off | ICP-MS with tungsten reported | Chloride or sulfate dilution | Lowers molybdenum; adds anions | Molybdenum below 45%; high ash or conductivity | Ion chromatography, ICP-OES | Recycled catalyst residue | Adds cobalt, nickel, vanadium or tungsten | Extra metals at mg/kg | Full ICP-MS scan Tungsten is the hardest substitution because it sits directly below molybdenum in the periodic table and behaves similarly in solution. A total-molybdenum titration that does not separate the two can read tungsten as molybdenum. ICP-MS reports both elements separately, which is why the full scan belongs in a source-qualification file. ## How to write identity into the specification - “Sodium molybdate, anhydrous, CAS 10141-05-6, Na2MoO4.” - “Assay 99.0–101.0% by HPLC; molybdenum 45.0–47.0% by complexometric titration.” - “Loss on drying ≤1.0%; identification by infrared and HPLC.” - “Sodium about 22.3% by ICP-OES where the salt form is confirmed analytically.” - “X-ray diffraction consistent with the anhydrous reference for a disputed lot.” - “Tungsten and other catalyst metals reported at the agreed limit.” - “Particle size ≥95% through 40 mesh.” ## Five questions for the supplier - Which hydrate is this lot, and which CAS number is on the certificate? - What is the molybdenum result, and is the assay reported on the same basis? - What is the sodium result by ICP-OES, and what method was used? - What is the loss on drying, and does the diffraction pattern match the anhydrous reference? - If the lot is disputed, will you accept a joint re-test on the retained sample with a full metal scan? Five direct answers amount to an identity file; a single assay percentage does not. The product hub carries the catalog specification; the COA page shows where each figure sits; the grades page compares the hydrates; the XRD method note explains the phase check; the ICP-MS note covers the trace-metal scan; the quality page describes the release file. ### 01 What a sodium selenite COA has to show URL: https://nutrition.rainwoodbio.com/products/minerals/sodium-selenite/coa/ Reviewed: 2026-11-19 The certificate for a sodium selenite lot reports appearance, identification by infrared and titration, assay by iodometric titration, the selenium figure from the same titration chemistry, loss on drying, the heavy-metal panel and microbiology. The assay and the selenium figure are not independent measurements, so the certificate is only readable when the method, the basis and the water content sit beside them. The limits below are the catalog specification; the batch COA is the document for a particular pack. In one lineThe assay, the selenium figure and the loss on drying are one calculation: a selenite result is only readable when the titration, the 44.0–46.0% selenium range and the water content are shown together. ## The certificate as a test report A certificate earns its place when a reviewer can check each line without a follow-up question. Every parameter should show what was measured, the method, the release limit and the result for the lot. “Conforms” is a conclusion; the evidence is the method and the figure. The release panel is short. The assay is an iodometric titration: selenite oxidises iodide to iodine in acid, and the iodine is titrated with sodium thiosulfate. The selenium figure comes from the same redox chemistry through the stoichiometric factor; infrared identification confirms the salt. Moisture, metals and microbiology complete the panel. Identity, assay, moisture and contaminants · sodium selenite | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | Infrared and titration | Conforms to the reference | Assay | Iodometric titration | 98.0–101.0% | Selenium | Iodometric titration, reported as Se | 44.0–46.0% | Loss on drying | Gravimetric | ≤2.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent The table is a specification, not a batch record. A lot certificate repeats the lines with measured results, a lot code and a release date. ## Assay, selenium figure and the water that separates them Anhydrous sodium selenite is 45.66% selenium by mass, so a 99.0% assay corresponds to about 45.2% selenium on the same basis. The selenium row is therefore not a second opinion on purity; it is the same titration expressed as the element. An assay and a selenium figure that do not move together point to a basis problem, an arithmetic error or an impurity. The basis is often missing. A result on the dried basis is higher than the same lot reported as-is, because the water has been divided out. At 2.0% loss on drying, a 45.2% dried-basis selenium figure becomes about 44.3% as-is. The certificate should state the basis in the assay row and give the loss on drying as a measured figure, not only a limit. The catalog article is the anhydrous salt, CAS 10102-18-8; the pentahydrate, CAS 26970-82-1, carries about 30.0% selenium and about 34% water and cannot meet a 44.0–46.0% selenium range or a ≤2.0% loss on drying. A certificate that does not name the hydrate leaves the reader to infer it from the numbers. ## Release limit versus batch result The release limit is the acceptance boundary. The batch result is what the laboratory measured on that lot. Both belong on the page, in separate columns, with the method beside them. A result column filled with the specification range is a copy of the gate, not a result. What the result column should contain | Parameter | Release limit | Result column | Assay | 98.0–101.0% | A measured percentage, with the basis and the method | Selenium | 44.0–46.0% | A measured percentage, with the same basis | Loss on drying | ≤2.0% | A measured percentage | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot “Passes specification” is a conclusion the reader should be able to reach from the figures. For microbiology the evidence is a count plus an absence statement; for heavy metals it is a figure per element, not a single total. A certificate that reports a sum of heavy metals has hidden the element that matters. Arsenic deserves its own line and detection limit, because the catalog limit is 2 mg/kg and a total-arsenic method says nothing about the species. ## What moves between batches Moisture is the largest mover. The powder is hygroscopic; a lot at 0.8% loss on drying and a lot at 1.9% can both pass, but they behave differently once the pouch is opened. The as-is assay moves with the water content, and the selenium figure follows. The titration moves by tenths of a percent with the standard, the end point and the analyst. That is method variation, not a quality signal; the certificate should still state the method and the basis. Appearance is the qualitative line. White to off-white is the catalog description; a pink or red tint suggests some selenite has been reduced to elemental selenium, and a damp or caked powder suggests moisture pickup. Neither is an identity failure on its own, but both deserve a retained sample and a re-test before release. Granulation can change bulk density and flow without moving the assay, so record the presentation and compare like with like. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a hydrate that the certificate does not name, or a result the buyer disputes. The useful panel is not a repeat of the certificate: total selenium by ICP-MS, ion chromatography for selenite and selenate, sodium by ICP-OES, loss on drying, the metal panel and microbiology. Add X-ray diffraction if the hydrate or the crystallinity is in question. The titration measures selenite, not total selenium. That selectivity is useful. If the ICP-MS total selenium is higher than the titration-derived figure, another selenium species is present, most likely selenate. If the total is lower, the digestion or the calibration is suspect. Ask for the detection limit and the recovery beside each result; a “not detected” line without a limit describes the method, not the sample. Chain of custody should connect the sample, the retained portion and the lot code. A report that names the product but not the lot is a demonstration of method, not evidence about the delivery. ## What to compare between suppliers Put six lines side by side: form and hydrate; CAS number; assay with its basis; selenium figure with its basis; loss on drying; metals and microbiology. Two quotations that agree on assay but differ on hydrate or basis are not describing the same powder. A quotation that names only “sodium selenite” leaves the hydrate and the basis open. The second layer is the document trail: who manufactured the lot, and whether the certificate, the specification and the pack carry the same revision and lot code. The catalog specification sits on the sodium selenite product page. The tests that separate the hydrate and the oxidation state are on the identity page; the destination file is on the compliance page; the titration and ICP-MS methods are described in the methods library; the release workflow is on the quality page. ### 02 Sodium selenite grades: anhydrous, pentahydrate and trituration URL: https://nutrition.rainwoodbio.com/products/minerals/sodium-selenite/grades/ Reviewed: 2026-11-19 Sodium selenite is sold in four presentations that are easy to confuse: the anhydrous salt, the pentahydrate, a trituration on a carrier, and a granulated powder. The catalog article is the anhydrous salt, CAS 10102-18-8, at 44.0–46.0% selenium; the pentahydrate is a different CAS with about 30% selenium, and a trituration is a different article with a declared carrier. The presentation decides the weighing step, the fill weight and the label before it decides anything else. In one lineThe hydrate and the presentation are the grade: the same salt name can describe 45.7% selenium, 30.0% selenium, or a trituration with a carrier on the label. ## Why the presentation is the grade Sodium selenite is one chemical compound, so there is no purity ladder to choose from in the way there is for a plant extract. What a buyer chooses is the hydrate and the presentation: the anhydrous salt, the pentahydrate, a dilution on a carrier, or a granulated powder. Each variation changes a number the buyer relies on — selenium content, loss on drying, flow, or the mass that carries the dose. The anhydrous salt is the catalog article. The pentahydrate is not a wetter version of the same powder; it is a different molecular weight, a different CAS number and a different selenium figure. A trituration is the salt distributed on a carrier, usually because the dose is too small to weigh into a production blend. Granulation changes the particle size and the flow without changing the chemistry. A purchase order that says “sodium selenite” and nothing else has not chosen among them. The hydrate, the carrier and the particle form are the three variables that travel from the specification to the label. ## The four presentations side by side Sodium selenite presentations · identity, selenium and what changes | Presentation | Identity | Selenium | Water | What changes | Anhydrous salt | CAS 10102-18-8; Na2SeO3 | 44.0–46.0% | Loss on drying ≤2.0% | The catalog article | Pentahydrate | CAS 26970-82-1; Na2SeO3·5H2O | About 30.0% | About 34% water | Different CAS, dose mass and label name | Trituration | Salt plus a named carrier | Declared on the blend | Carrier-dependent | The carrier is an ingredient; the label and dose change | Granulated powder | The same salt, larger particles | Same as the base salt | Same limit | Flow and dust change; the assay does not The CAS number is the fastest check. A certificate that says 10102-18-8 describes the anhydrous salt; one that says 26970-82-1 describes the pentahydrate. A certificate that names only a carrier is a certificate for a trituration, and the selenium figure belongs to the blend, not to the salt. The four rows are four different purchase orders, not four grades of one specification. ## Solubility, moisture and dust Anhydrous sodium selenite is a white to off-white powder, freely soluble in water; the solution is neutral to slightly alkaline. It is hygroscopic, so the powder picks up moisture when the pack is open, and it is an oxidant that reacts with reducing agents. Those two properties drive the handling: a sealed pack, a dry store, and a weighing step that keeps the salt away from ascorbic acid, thiols and sulfites. The pentahydrate is a different solid with a different water content and a different solubility behaviour. It is not interchangeable with the anhydrous article, and a formula written for one cannot be switched to the other without recalculating the mass. The selenium figure differs by about a third, so the error from a silent substitution is large. Granulation improves flow and reduces dust, which matters at a weighing station where the active is a small fraction of the blend. It does not change the assay, and it does not make the salt less hygroscopic. Dust control is a containment question as well as a housekeeping one: the concentrated salt is toxic by ingestion, so the SDS and the weighing controls belong in the file. ## Dose arithmetic and the dosage form The label dose is selenium, not salt. At 55 µg selenium the anhydrous salt supplies about 0.12 mg and the pentahydrate about 0.18 mg; at 200 µg the figures are about 0.44 mg and 0.67 mg. A trituration changes the mass again, because the carrier dilutes the selenium figure. The arithmetic is fixed by the formula and the hydrate, not by the brand name on the pack. Mass of salt required for a selenium dose | Selenium dose | Anhydrous salt (45.66% Se) | Pentahydrate (30.02% Se) | 55 µg | About 0.12 mg | About 0.18 mg | 100 µg | About 0.22 mg | About 0.33 mg | 200 µg | About 0.44 mg | About 0.67 mg At these masses the pure salt is a premix ingredient, not a weigh-out ingredient for a production blend. A trituration turns a sub-milligram quantity into grams: a 0.1% selenium blend needs 55 mg to deliver 55 µg. The trade is that the carrier becomes part of the article, the selenium figure falls, and the label has to declare the blend rather than the pure salt. The dosage form follows. A capsule or tablet can take the pure salt only through a premix step; a stick pack or a powder blend usually takes a trituration. A liquid uses the salt because it dissolves, but the solution needs its own stability data. The presentation is a formulation decision, and it should be made before the fill weight is fixed. ## What to write into the specification - “Sodium selenite, anhydrous, CAS 10102-18-8, Na2SeO3; the pentahydrate is excluded.” - “Assay 98.0–101.0% by iodometric titration, with the basis stated.” - “Selenium 44.0–46.0%, reported from the titration; total selenium by ICP-MS where the form is disputed.” - “Loss on drying ≤2.0%; a hydrate outside this limit is a different article.” - “Identification by infrared and titration; no selenate above the agreed limit.” - “For a trituration: carrier named, selenium figure on the diluted material, and the carrier declared on the label.” - “For granulation: particle-size range and bulk density agreed; the chemistry is unchanged.” - “Destination market and exact hydrate confirmed before the order.” A specification that names only the salt and the assay leaves the hydrate, the carrier and the presentation open. Those are the three variables that change the dose and the label, and they are cheaper to fix before the order than after it. The product hub carries the catalog specification; the selenite and selenomethionine comparison takes the source question further; the L-selenomethionine page and the selenium yeast page show the other two sources; the compliance page covers the label entries; the quality page describes the release workflow. ### 02.1 Sodium selenite vs selenomethionine: the selenium figure and the label URL: https://nutrition.rainwoodbio.com/products/minerals/sodium-selenite/grades/sodium-selenite-vs-selenomethionine/ Reviewed: 2026-11-19 Sodium selenite and L-selenomethionine deliver the same element from different molecules. The anhydrous salt is 45.66% selenium and the amino acid is 40.27%, so a 55 µg selenium dose needs about 0.12 mg of the salt or about 0.14 mg of the amino acid. The label must name the source, and the form changes the premix, the stability and the market file before it changes the dose. In one lineSelenite carries about 45.7% selenium and selenomethionine about 40.3%, so the same microgram dose is a different mass of powder and a different word on the label. ## Two forms, two chemical settings Sodium selenite is an inorganic salt: selenium sits in the selenite ion at oxidation state +4, paired with two sodium ions, and the anhydrous form has a molecular weight of about 172.95. L-Selenomethionine is an amino acid: selenium replaces the sulfur of methionine, is covalently bound to carbon, and the molecule has a molecular weight of about 196.11. They are separate articles with separate CAS numbers, certificates and label names. Sodium selenite and L-selenomethionine · specification comparison | Property | Sodium selenite | L-Selenomethionine | CAS number | 10102-18-8 (anhydrous) | 3211-76-5 | Formula | Na2SeO3 | C5H11NO2Se | Molecular weight | About 172.95 | About 196.11 | Selenium content | 44.0–46.0% (theoretical 45.66%) | 39.0–41.0% (theoretical 40.27%) | Selenium setting | Inorganic selenite, Se(IV) | Organic amino acid, selenium bound to carbon | Label ingredient | Sodium selenite | L-Selenomethionine | Water solubility | Freely soluble; solution neutral to slightly alkaline | Soluble; clear, colourless solution Neither name is a synonym for “selenium”. The element is what the nutrition panel declares; the form is what the ingredient list names. ## The selenium figure and the mass per dose The selenium figure connects the label to the weigh-out. Anhydrous selenite is 45.66% selenium, so 1 mg of selenium needs 2.19 mg of salt. Selenomethionine is 40.27% selenium, so 1 mg of selenium needs 2.48 mg of the amino acid. The amino acid needs about 13% more mass per milligram of selenium. Mass of material required for a selenium dose | Selenium dose | Sodium selenite (anhydrous) | L-Selenomethionine | 55 µg | About 0.12 mg | About 0.14 mg | 100 µg | About 0.22 mg | About 0.25 mg | 200 µg | About 0.44 mg | About 0.50 mg At these masses the pure materials are premix ingredients, not weigh-out ingredients for a production blend. A 0.1% selenium trituration would need 55 mg for a 55 µg dose, which is a weighable quantity; the carrier is part of the article and must be declared. The conversion from a label dose to a material mass is arithmetic, and the first thing to redo when a formula changes source. State the basis. A 99.0% assay on the dried basis is not 99.0% of the powder as weighed. Convert with the loss on drying first, then apply the selenium factor. A dose built on the wrong basis is off by the water content, and the error is larger with the pentahydrate. ## What the label has to declare The label declares selenium; the ingredient list declares the source. In the EU, the ingredient list uses the entry that matches the form, and the nutrition declaration gives selenium in micrograms against the 55 µg reference intake. In the US, the Supplement Facts panel declares selenium in micrograms and as a percentage of the Daily Value, and the ingredient statement names the source, for example “Selenium (as sodium selenite)”. “Selenium” alone is not enough. A pack that names the nutrient but not the source does not match a file built around one salt, and a pack that names selenomethionine while the drum is selenite is mislabelled. The certificate and the artwork must use the same form name. If the material is a trituration, the carrier is an ingredient and belongs in the list. The selenium figure on the label is calculated from the diluted material, not from the concentrate. A granulation that adds a binder changes the formulation; one without a carrier does not change the ingredient list, but it still belongs in the specification. ## Premix and process behaviour The two forms fail differently in a blend. Selenite is an oxidant and is reduced by ascorbic acid, thiols and sulfites to elemental selenium, which is insoluble and can show as a pink or red discolouration. A premix that combines selenite with a reducing agent needs evidence that the blend is stable, not an assumption carried over from the certificate of the pure salt. Selenomethionine is an amino acid and is not reduced to elemental selenium by ascorbic acid in the same way, but it is still an organic molecule in a matrix: moisture, oxidants, pH and heat belong in the stability work. The absence of the selenite discolouration is not a guarantee of stability. The salt is hygroscopic; the amino acid is crystalline with a tighter moisture limit in its catalog. Both still pick up moisture in an open pack, and both need a sealed pack and a defined in-use period. Test the blend at the inclusion level you will use; a result on the pure powder does not describe a premix. ## The form in the market file The form is a market-file question. The EU permitted-forms list is form-specific, and the buyer's team checks the entry that matches the drum; sodium selenite, L-selenomethionine and selenium-enriched yeast are not interchangeable names on the list or on the pack. The maximum selenium level in supplements is set by Member States rather than harmonised, so the destination matters. EFSA's 2023 tolerable upper intake level of 255 µg/day for adults is a hazard reference, not a permitted maximum. In the US, the ingredient needs a lawful basis for the exact form and use, and the Supplement Facts panel names the source. The Daily Value is 55 µg and the adult tolerable upper intake level is 400 µg/day. A form accepted in one market is not automatically accepted in the other, and a label written for one form does not transfer to the other. The UK has its own retained list and claims register; Northern Ireland follows the EU framework. A product sold in both parts of the UK can need two files. The sodium selenite compliance page sets out the documents the file needs. ## When each form fits Choose sodium selenite when the formula needs the higher selenium figure, a small mass per dose, an inorganic salt that dissolves freely, or a source the existing market file already names. Choose L-selenomethionine when the label and the file are built around the amino acid, when a crystalline organic source is wanted, or when the premix cannot carry a reducing-agent-sensitive salt. The choice is not a unit conversion. A formula built on one form has a label, a specification, a stability arm and a market file built around it; switching source means rebuilding those four. The two product specifications and the grade comparison are the place to compare before the switch: the sodium selenite hub, the L-selenomethionine page, the selenium yeast page and the grade page. The analytical methods are in the methods library, and the release workflow is on the quality page. ### 03 Sodium selenite stability: moisture, reducing agents and the pack URL: https://nutrition.rainwoodbio.com/products/minerals/sodium-selenite/stability/ Reviewed: 2026-11-19 The dry salt is hygroscopic and the solution is redox-active: moisture pickup raises the loss on drying and dilutes the as-is assay, while a reducing agent in a blend or a drink can convert selenite to insoluble elemental selenium. The pack, the blend and the process decide the shelf life, not the certificate. A sealed foil pouch in a dry store is the starting point; a liquid needs its own data. In one lineMoisture and a reducing agent are the two ways a selenite lot fails, and the pack is the only control that travels with the powder. ## The dry powder: moisture and the seal The catalog limit is loss on drying ≤2.0%. That is a release gate, not a storage allowance. Once the foil pouch is opened, the powder can take up moisture from the air; the loss on drying rises, the as-is assay falls and the powder can cake. A tight seal and a dry store are part of the specification in practice, even when they are not printed on the certificate. The salt is hygroscopic enough that an opened pouch should be resealed promptly and used within a defined in-use period. A desiccant helps in a humid room, but it does not replace the seal. The 25 kg drum relies on its inner liner: keep the liner closed, keep the drum off a damp floor and record the opening date. The lot code on the drum, the liner and the certificate should match. Heat accelerates moisture pickup and the redox reactions that follow. A hot loading bay, a car boot or a greenhouse is not a store. If the pack has been in a cold place, let it equilibrate before opening so that condensation does not form on the powder. The dry powder is not the fragile part of the supply chain, but the opened pack is. ## The solution: where reduction shows The salt dissolves freely in water to give a neutral to slightly alkaline solution. In solution the selenite ion is exposed to everything else in the matrix: reducing agents, light, heat and pH. Ascorbic acid is the clearest case. It reduces selenite to elemental selenium, which is insoluble and can appear as a red or pink precipitate. Thiols, sulfites and some sugars can do the same under the right conditions. A concentrate or a ready-to-drink product therefore needs its own hold-time data. The powder's stability file does not transfer to a liquid, and a clear bottle on a bench is an exposure. If a liquid is unavoidable, control the pH, keep dissolved oxygen and reducing agents out, protect the solution from light and validate the hold time before filling. Colour is the practical warning. A solution that starts clear and develops a pink or red tint has probably lost selenium to the elemental form, and the assay will confirm it. A colour change is a reason to stop the batch, not a reason to add dye. ## What drives degradation Factors that move sodium selenite during storage | Factor | What it does | Control | Moisture | Raises loss on drying; lowers the as-is assay; caking | Sealed pouch; dry store; desiccant where needed | Reducing agents | Reduce selenite to elemental selenium; colour and assay change | Exclude ascorbic acid, thiols and sulfites; test the blend | Heat | Accelerates moisture pickup and reduction | Cool store; control process temperature | Light | Solution discolouration and reduction | Opaque or foil pack; dark storage | pH | Acid conditions favour reduction and precipitation | Validate the matrix pH; buffer if needed | Metal contact | Catalyses redox reactions; corrosion | Lined or stainless contact; avoid iron and copper These factors are not independent. A warm, bright, acidic drink with ascorbic acid combines four of them; a sealed pouch in a dry store avoids all but one. The useful question is not “is sodium selenite stable?” but “stable in which pack, in which matrix, for how long?” ## A stability protocol for the ingredient A useful protocol states the pack, the condition, the time points and the tests. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% relative humidity cover the warehouse; accelerated storage at 40 °C/75% relative humidity stresses the pack. Add a light-exposure arm for the solution and a blend arm for any premix or trituration. Test assay by titration, selenium, loss on drying, appearance, identity and microbiology at each point. For a blend, test uniformity and the selenium figure in the blend, not only in the concentrate. For a liquid, test the matrix at its process pH and heat load. Report the individual results, not a pass statement, and identify the pack and the lot family. Add an opened-pack arm if the customer will hold the pouch after opening. The in-use period is a stability result, not a guess. A pouch that is opened daily in a humid room is a different storage condition from a drum that is closed between withdrawals, and the data should match the way the material is handled. ## The finished formula changes the answer A capsule or tablet has low water activity, but the shell and the excipients can still transfer moisture. Check loss on drying at release and after storage, and check the appearance of the fill. A powder blend with ascorbic acid, a thiol-rich botanical or a sulfite carrier is a redox test, not a simple blend, and the test belongs on the blend at the inclusion level you will use. A stick pack depends on the seal and the foil; a pinhole is a failure, and the strip should be inspected, not only the powder. A beverage combines water, pH, heat and light, and the selenite concentration is low, so a small amount of reduction can be visible as a colour change. The formulator decides whether an overage is needed; that is a label and stability decision, and it does not repair a pack that lets moisture in. Test the ingredient in the matrix, not only as the pure salt. A result on the pure powder at 100% is not evidence for a 0.1% trituration in a vitamin C blend, and a certificate cannot substitute for the blend study. ## How the shelf life is set We do not publish one shelf-life number for sodium selenite, because the pack and the storage condition set it. The assigned retest period belongs on the specification and is supported by the stability file for that pack. A number without a pack, a condition and a test panel is not a shelf life; it is a claim. After the retest period, re-assay the retained sample before extending use. Do not carry a bulk figure across to a repacked pouch or a trituration, because the surface-to-volume ratio, the headspace and the carrier change the rate. The product hub lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the methods library describes the titration; the quality page describes the release workflow. ### 04 Sodium selenite: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/sodium-selenite/moq/ Reviewed: 2026-11-19 Sodium selenite is supplied from 1 kg in a foil pouch and 25 kg in a fiber drum, with a catalog lead time of 1–7 days. A kilogram carries about 456 g of selenium, which is millions of 55 µg doses, so the minimum is a traceability and handling unit rather than a production quantity. A firm quotation needs the hydrate, the presentation, the quantity, the destination, the documents and the intended use. In one lineA kilogram of sodium selenite carries about 456 g of selenium, so the minimum order is a handling and traceability unit, not a dose-sized one. ## Why the minimum is 1 kg The kilogram is the smallest pack that can be drawn from a released lot, sampled and traced without splitting a batch record. That is the reason for the minimum, not a volume target. A buyer who wants 100 g is asking for a sample, and a sample is handled as a portion of a lot with its own documentation. The arithmetic shows how far a kilogram goes. At 45.66% selenium, 1 kg carries about 456.6 g of the element. At 55 µg per dose that is about 8.3 million doses; at 200 µg it is about 2.3 million. A single-SKU brand will not exhaust the pouch quickly, and a contract manufacturer moves to the drum for handling reasons, not because the pouch is short. That mismatch is why the order conversation is usually about the presentation. A pure salt cannot be weighed into a low-dose blend at production scale, so a trituration or a granulated premix is the practical purchasing unit. A trituration is a separate article with a carrier, a lower selenium figure and its own label; the 1 kg minimum applies to the catalog salt, and a trituration is quoted on its own specification. ## Packs and what they protect Standard sodium selenite packs | Pack | Net | Fits | Watch | Foil pouch | 1 kg | Trial, small batch, retained sample | Reseal after opening; the seal is the moisture barrier | Fiber drum | 25 kg | Production and contract manufacturing | Inner liner; opening date; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Particle profile; the chemistry is unchanged The pouch is the qualification pack and the drum is the production pack. The foil is the moisture and light barrier; the seal is the weak point. The drum relies on its liner, so ask for the liner specification and whether a desiccant is included. The lot code on the pack, the certificate and the retained sample has to match; that three-way match is the traceability chain. Granulation is a finishing step, not a dilution. It changes flow and bulk density and leaves the assay and the selenium figure alone. A granulated lot is a different presentation with its own particle-size range; write that range into the specification if flow matters. ## Lead time and dispatch The catalog lead time is 1–7 days for a released standard lot. That window covers picking, the document set and handover to the carrier; it does not include transport, customs clearance or the buyer's incoming inspection. Ask for the planned dispatch date and the lot code at the point of order, not at the point of dispatch. Custom work adds time. Granulation is a production step, extra testing is laboratory time, and a destination that needs legalised documents or a specific SDS language adds administrative time. A trituration is a separate blend with its own uniformity test and its own lead time, so it should not be planned against the standard pack date. Ask for the dispatch date for sodium selenite; 1–7 days is the quoted window, not a firm date. The pouch can travel as a parcel; the drum can go on a pallet. The Incoterm determines which party books carriage and clears the entry. Have the certificate, SDS and lot code travel with the lot, and inspect the seal on arrival, because the anhydrous salt is hygroscopic. ## What a quotation needs Six details turn a request into an offer that can be checked: - Product and hydrate. Sodium selenite anhydrous, CAS 10102-18-8; the pentahydrate is a different CAS and a different quotation. - Specification and basis. Assay range, selenium range, loss on drying, identity, metals and microbiology, with the assay basis stated. - Presentation and pack. Powder or granulated; 1 kg pouch or 25 kg drum; any trituration named with its carrier. - Quantity and delivery. The number of packs, the destination and the Incoterm. - Documents. COA per lot, TDS, SDS, allergen and GMO statements, origin, and any market-specific declaration. - Intended use and market. Supplement, food or another use, and the country where the product will be sold. A quotation without the hydrate and the market is incomplete. The same salt name can describe the anhydrous article, the pentahydrate or a trituration, and the documents differ. We do not publish commercial terms on this page; they are stated on the quotation. ## The sample is a lot, not a demonstration The 1 kg pouch is the qualification sample. Test identity, assay, selenium, loss on drying and microbiology before scaling, and keep a retained portion from the same pack. The lot code on the sample, the COA and the quotation should match. A sample without a lot code is a demonstration, not a qualification. Run the material through the real process: the blend, the fill, the press or the stick filler. Check uniformity at the inclusion level you will use, because a fraction of a milligram per dose is where segregation shows. If the trial raises a result the certificate does not explain, test the retained portion independently before asking for another sample. If the project needs a smaller bench quantity, discuss it before ordering. A split from a bulk lot is a repack with its own traceability, not the catalog pack, and it should be documented as such. Do not assume that a bench sample and the production drum come from the same lot. ## Terms to settle before the first order The specification revision, the remaining shelf life on arrival, the document list and the quantity tolerance belong in the order. So do the quality terms: COA per lot, retained sample, retest period and the change-control route for a new source, a new hydrate or a new presentation. Returns and replacements follow the quotation and the quality agreement. A lot that fails the agreed specification should be handled through the retained sample and a joint re-test, not through a photograph of the powder. Ask who pays for the referee test and which laboratory both sides accept. The product hub carries the catalog specification; the COA page lists the release tests; the compliance page covers the market file; the MOQ glossary entry defines the term; the quality page describes the release workflow. ### 05 The regulatory file for sodium selenite: form, dose and label URL: https://nutrition.rainwoodbio.com/products/minerals/sodium-selenite/compliance/ Reviewed: 2026-11-19 The file for sodium selenite answers four questions: what exact salt and hydrate is being bought, whether the destination allows that form in the intended use, what selenium dose and contaminant ceilings apply to the finished product, and what the label may say. The supplier provides the specification, the lot COA and the SDS; the buyer's regulatory team confirms the route for the destination. The catalog limits are the raw-material specification, not a market authorisation. In one lineThe form, the selenium dose and the label wording are three separate regulatory questions, and the destination decides all three. ## Four checks, one file A regulatory file is not a certificate with a cover letter. It is a set of consistent answers: the article on the specification, the results on the lot COA, the route the destination allows, the dose in the finished product and the wording on the pack. One weak link makes the rest unverifiable. The nutrient is selenium, but the ingredient is a specific form: sodium selenite, sodium hydrogen selenite, sodium selenate, L-selenomethionine and selenium-enriched yeast are separate names and separate entries to check. A file that says “selenium” has not named the ingredient. The supplement route and the food-additive route are also separate. A form accepted in one route is not automatically accepted in the other, and a supplement specification may not carry the documentation a food-additive file needs. The buyer's team decides the route. ## European Union The EU framework has four layers. Directive 2002/46/EC covers food supplements, with Annex I for the nutrients and Annex II for the permitted forms. Regulation (EU) No 1169/2011 covers labelling and the selenium reference intake of 55 µg/day. Regulation (EU) 2023/915 sets contaminant maxima for food, including supplements. Regulation (EC) No 1924/2006 and Regulation (EU) No 432/2012 govern claims. The maximum selenium level in supplements is not harmonised; Member States set national limits, so the destination matters. EFSA's 2023 opinion set a tolerable upper intake level of 255 µg/day, a hazard-based reference rather than a permitted maximum. The buyer's regulatory team checks the Annex II entry against the exact salt and hydrate, the national maximum and the current consolidated texts. ## United States In the US the first question is whether the exact form is a lawful dietary ingredient for the intended use. The route can be a pre-DSHEA marketing history, a GRAS conclusion, or a new dietary ingredient notification; the supplier names the basis, and the buyer confirms it covers the finished product. “Selenium is a nutrient” does not establish the basis for a particular salt. On the label, the Supplement Facts panel declares selenium in micrograms and as a percentage of the Daily Value, 55 µg; the ingredient list names the source. The adult tolerable upper intake level is 400 µg/day. Manufacturing falls under the dietary-supplement cGMP in 21 CFR 111. There is no federal heavy-metal maximum specific to supplements; California's Proposition 65 and the finished-product dose can decide whether a warning is needed. ## United Kingdom Great Britain applies a retained version of the EU food-supplement rules. The permitted-forms list and the claims register are the GB versions, and the labelling rules are UK law; check the current text rather than assuming an EU entry or an EU-authorised sentence carries over. The reference intake is 55 µg/day. Northern Ireland applies the EU regime under the Windsor Framework, so a lot for Belfast follows the EU column. A UK launch can therefore need two files, and the destination address decides which one applies. ## Contaminants and limits Heavy-metal limits · catalog specification and market ceilings | Element | Catalog limit | EU food-supplement ceiling | US federal | Lead | ≤3 mg/kg | 3.0 mg/kg | No general limit | Arsenic | ≤2 mg/kg | No harmonised limit; national rules | No general limit | Cadmium | ≤1 mg/kg | 1.0 mg/kg (3.0 for seaweed-based) | No general limit | Mercury | ≤0.1 mg/kg | 0.10 mg/kg | No general limit The catalog column is a raw-material limit; the EU column is written for the supplement as sold. They are not interchangeable. At a 55 µg selenium dose the selenite mass is about 0.12 mg, so the raw material contributes a very small share of the capsule; the excipients, the shell and the water are often larger contributors. The finished-product calculation is still required, and a raw-material result is not a label statement. Arsenic is the line to watch because there is no harmonised EU maximum for supplements; the catalog limit of 2 mg/kg is a customer specification. A total-arsenic method should state the digestion and the detection limit; a speciation result is a different test. ## Claims and label wording No disease-related claim belongs on a sodium selenite pack. In the EU, a claim must be on the authorised list and match its conditions; in the US, a structure/function statement must be truthful, substantiated and disclaimed. The ingredient name is not a claim, but it must match the certificate. “Selenium” describes the nutrient; “sodium selenite” describes the ingredient. A pack that names the nutrient but leaves the source generic does not match a file built around the salt. Conversely, a sentence written for another selenium form should not be assumed to fit this one. Nothing on this page is a claim for the ingredient. The label sentence belongs to the brand's reviewer, and the evidence belongs in the brand's file. ## The document pack Documents a brand should hold for a sodium selenite lot | Document | What it proves | Who issues it | Specification | The agreed article, hydrate and limits | Buyer and supplier | Lot COA | The results for this lot | Manufacturer | TDS | The technical description and presentation | Manufacturer | SDS | Handling and hazard information | Manufacturer | Allergen and GMO statements | Whether a declarable allergen or GMO is present | Manufacturer | Origin statement | Where the lot was made | Manufacturer | Contaminant and microbiology results | The panel against the limits | Manufacturer or laboratory | Packaging declaration | Food-contact suitability of the pack | Pack supplier Every document should carry the lot code or point to it. A generic TDS and a lot-specific COA are not a matched pair unless article, hydrate and pack agree. Two declarations are easy to forget: non-irradiation and no ethylene oxide treatment. ## Checklist before the first order Market file checklist · sodium selenite | Check | Evidence | Red flag | Form and hydrate | Specification and COA name the CAS | “Sodium selenite” with no hydrate | Destination route | The buyer's regulatory note for the market | An EU entry assumed to cover the US | Selenium dose | µg per day and the finished-product calculation | A salt mass presented as selenium | Contaminants | COA results at the daily dose | A raw-material limit pasted onto the supplement | Label source | Ingredient list names the salt | “Selenium” with no source | Claims | Authorised wording or a disclaimed structure/function statement | A disease claim | Documents and change control | Lot code on the file; a new label for a new source | Generic documents with no lot link Seven checks, seven pieces of evidence. The product hub carries the catalog specification; the COA page shows the lot results; the identity page covers the form tests; the methods library describes the analytical work; the quality page describes the release file. ### 06 How we prove a sodium selenite lot is the anhydrous salt URL: https://nutrition.rainwoodbio.com/products/minerals/sodium-selenite/identity/ Reviewed: 2026-11-19 A lot is anhydrous sodium selenite when five lines agree: the document names the anhydrous salt and CAS 10102-18-8, infrared and titration identify the salt, the iodometric assay is 98.0–101.0%, the selenium figure is 44.0–46.0%, and the loss on drying is ≤2.0% with sodium near the theoretical 26.6%. The assay alone cannot separate the salt from the pentahydrate, a dilution or a selenate mix. The hydrate and the oxidation state are the two questions that need their own evidence. In one lineIdentity is the agreement between the titration assay, the selenium figure and the water content, with the hydrate state named in the specification. ## The four identity layers A certificate can name the right salt and still describe the wrong hydrate. The four layers below are separate questions, and each one needs its own evidence. A supplier who answers only the first has described the paperwork, not the powder. Four layers of sodium selenite identity | Layer | Question | Test | What it proves | Document | Is the hydrate and CAS named? | Name, CAS number, formula | Paperwork only | Salt | Is it sodium selenite? | Infrared and iodometric titration | The selenite salt | Element | Does the selenium balance close? | Se from titration; total Se by ICP-MS | The selenium figure | Water | Is it the anhydrous salt? | Loss on drying; XRD if disputed | The hydrate state The order matters. The document layer is a purchase-order check, not an identity test. The salt layer is the first analytical evidence; the element and water layers are what turn a name into a specification. ## The selenium and sodium balance Anhydrous sodium selenite is 45.66% selenium and 26.59% sodium by mass, with two sodium ions for each selenium atom. A lot with a 99.0% assay should carry about 45.2% selenium and about 26.3% sodium on the same basis. The sodium figure is not on the catalog specification, so it is an additional test; ask for it when the salt or the hydrate is disputed. The sodium-to-selenium ratio is consistent with the disodium salt, but it does not prove the oxidation state. Sodium selenate is also a disodium salt with a similar selenium-to-sodium mass ratio, so a sodium result close to theory does not rule out selenate. The titration does: it measures selenite, and selenate does not titrate under the same conditions. If the ICP-MS total selenium is higher than the titration-derived figure, the gap is the evidence for another species. The absolute figures catch a dilution. A non-sodium carrier lowers the sodium figure and the assay together; sodium chloride or sulfate raises sodium relative to selenium. Neither pattern is proof on its own, but both tell the reviewer which second test to order. The ratio and the absolute figures answer different questions, and a certificate needs both. ## X-ray diffraction and the solid state X-ray diffraction answers the solid-state question: is the powder crystalline, and does the pattern match the anhydrous salt? It can distinguish the anhydrous pattern from the pentahydrate and from an amorphous carrier, and it can compare lots from two sources. It is not a purity assay, and it does not measure the counter-ion or the oxidation state. XRD is not a routine release test for this product. Ask for the reference pattern and the detection limit before reading a “match” statement, and read a certificate that reports only “XRD conforms” as a pointer, not as evidence. The release tests remain infrared, titration, loss on drying, metals and microbiology. The method is most useful when the question is the hydrate. A lot with a selenium figure near 44% and a loss on drying near 2.0% is consistent with the anhydrous salt; a pattern that matches the pentahydrate would explain a selenium figure near 30% and a water content near 34% without any need to invent a blend. ## What adulteration looks like Common sodium selenite substitutions and the signals | Adulterant | What it does | Signal | Test | Pentahydrate | Lowers Se to about 30%; raises water to about 34% | Se and loss on drying far outside the ranges | Loss on drying, Se, XRD | Sodium selenate | Different oxidation state; similar Se : Na ratio | Titration low against ICP-MS total Se | Ion chromatography, ICP-MS | Non-sodium diluent | Lowers assay and Se; sodium below theory | Absolute Se and Na both low | Sodium by ICP-OES, mass balance | Sodium chloride or sulfate | Raises sodium relative to Se; lowers assay | Na high; Se low | Ion chromatography, sodium | Elemental selenium | Insoluble; red or grey; low titration | Colour; residue; low assay | Visual, filtration, titration, XRD Colour is the weakest signal. A pink or red tint can be elemental selenium, but it can also be a trace impurity or a lighting artefact. The stronger signals are the water content, the selenium-to-sodium balance and the titration against total selenium. A certificate that reports appearance and assay but not the hydrate has left the most likely substitution untested. ## What to write into the specification - “Sodium selenite, anhydrous, CAS 10102-18-8, Na2SeO3; the pentahydrate is excluded.” - “Assay 98.0–101.0% by iodometric titration, with the basis stated.” - “Selenium 44.0–46.0%, reported from the titration; total selenium by ICP-MS where the form is disputed.” - “Loss on drying ≤2.0%.” - “Identification by infrared and titration; sodium about 26.6% by ICP-OES if the salt is to be confirmed analytically.” - “No selenate above the agreed limit; ion chromatography where a blend is suspected.” - “Heavy metals and microbiology as listed; destination market confirmed before the order.” The word “anhydrous” does the work that a selenium range alone cannot do. A specification that omits it admits the pentahydrate, and a specification that omits the oxidation state admits selenate. Both substitutions can land inside a broad selenium range if the rest of the specification is silent. ## Five questions for the supplier - Which hydrate is this lot, and which CAS number is on the certificate? - Can you provide the infrared spectrum and the titration method, not only the assay percentage? - What is the loss on drying for this lot, and is the assay reported as-is or on the dried basis? - What is the total selenium by ICP-MS, and does it agree with the titration-derived figure? - If the lot is disputed, will you accept a joint re-test on the retained sample? Five direct answers amount to an identity file. A single assay percentage does not. The product hub carries the catalog specification; the COA page shows where each figure sits on the certificate; the grade page compares the hydrate and the trituration; the selenite and selenomethionine comparison covers the source question; the methods library explains the separation; the quality page describes the release workflow. ### 01 What a boron bisglycinate certificate actually reports URL: https://nutrition.rainwoodbio.com/products/minerals/boron-bisglycinate/coa/ Reviewed: 2026-11-19 A boron bisglycinate certificate has two jobs: report the elemental boron, and show that the boron is held by glycine rather than sitting in boric acid or a borate. The figures in the tables below are the catalog limits for the 5% grade, not results. A batch COA carries results for one lot, and with no CAS number to fall back on, the ligand line matters as much as the boron line. In one lineThe boron figure sets the dose and the glycine figure sets the identity; a certificate that reports only the first has not shown that the lot is the complex. ## The three blocks on the page Read a certificate in three passes. Identity comes first: appearance plus an infrared spectrum that matches the glycine–boron reference. Composition comes next: boron by ICP-OES and glycine by HPLC. Release comes last: moisture, the metal panel, microbiology and mesh. A document that carries only the third block describes a white powder, and a white powder could be several things. Catalog limits, boron bisglycinate 5% grade | Test | Limit | Method | Boron | 5.0–6.0% | ICP-OES after acid digestion | Glycine | Reported for the lot | HPLC, with the basis stated | Identity | Matches the reference | Infrared spectrum | Moisture | ≤5.0% | Gravimetric loss on drying | Metal panel | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | ICP-MS | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Enumeration and absence tests | Mesh | ≥95% through 40 | Sieve The glycine line is what separates a complex from a blend. Boric acid carries about 17.5% boron, so a modest addition lifts the boron figure a long way, and a mixture of boric acid and free glycine can be built to sit inside a 5.0–6.0% window with no boron–glycine bond in it. The element alone cannot expose that, which is why the ligand result belongs on the same page. The limit reads "reported for the lot" because the complex is not one stoichiometric salt; the way the ligand figure is used is worked through on the identity page. ## As-is, dried, and what the percentage describes Boron results are usually reported on the powder as received, and the catalog limit is written the same way, so a lot at 5.2% is read straight against 5.0–6.0%. A supplier who reports on the dried basis will show a higher number for the same powder: 5.2% as-is with 4.0% moisture becomes 5.42% once the water is divided out. Nothing has changed except the arithmetic, and nothing on the page will say so unless the basis is printed beside the result. The figure a formulator can use is grams of boron per gram of powder, because that is what becomes a capsule fill. No line on the certificate measures the percentage of "complex". At 5% boron the greater part of the powder is ligand and water, so the complex share is inferred from the boron and glycine results together. That is the reason the two lines are more useful read as a pair than read alone. Grade is part of the basis as well. A 5% specification and a 10% specification are separate documents with separate windows, and a certificate for one says nothing about the other. At 10% boron the powder weight for a given dose roughly halves, and the ligand share falls in proportion. ## Limit, result and the line between them The limit is where the lot is allowed to sit; the result is where it did sit. Both belong on the page, in their own columns, with the method named. What belongs in the result column, line by line | Item | Gate | Evidence the lot should show | Boron | 5.0–6.0% | The measured figure, with its basis | Glycine | Reported for the lot | The measured figure plus the ratio to boron | Moisture | ≤5.0% | The as-received percentage | Metal panel | Per element | One figure in mg/kg for each element | Mesh | ≥95% through 40 | The share that passed the sieve A pass statement is a summary, and the reader should be able to rebuild it from the numbers. A heavy-metal line that gives a total has folded four measurements into one and hidden the element that matters. A microbiology line that says "absent" without naming the organisms and the test has hidden the method. ## What shifts from lot to lot Boron moves with the reaction ratio and with any blending step. Moisture moves with the dryer. Mesh moves with the mill, and colour moves with the drying history. Read across lots as a pair: boron flat while glycine falls suggests a carrier has been added; both falling suggests dilution; boron up while glycine falls suggests a borate or boric acid has been introduced. Because the complex is not a single crystalline salt, boron is a manufacturing target rather than a physical constant. A producer who keeps 5.0–6.0% across lots is holding the reaction and the blend; a producer whose boron drifts across the window is holding neither. The trend across several lots says more than one certificate at the edge of the range. The lot code on the page should lead back to the pouch, the drum and the sample the producer keeps. Without it, the certificate cannot be tied to any particular pack. ## When to pay for an outside laboratory An outside test earns its place when the source is new, when the lot is the first into a regulated market, when the form is contested, or when the documents hint at a blend. The panel that answers the form question is not a repeat of the certificate: boron by ICP-OES, glycine by HPLC, an infrared spectrum, moisture, sodium by ICP-OES, and a crystalline-phase check where a borate is suspected. Sodium is the cheap tell. A glycine complex carries none; sodium borate does, and it is a common way to lift a boron figure. A sodium result above the reporting limit, with boron comfortably inside the window, is a question for the supplier rather than a line to file. Ask each laboratory for its detection limit beside each screen. "Not detected" with no limit attached describes the reach of the method rather than the absence of the substance, and two laboratories can use the same words for results two orders of magnitude apart. ## Comparing two suppliers Six lines make the comparison: name and grade; boron with its basis; glycine with the calculated ratio; moisture; the metal and microbiology results; and pack, lot code and specification revision. Two offers can agree on the boron percentage while describing different grades or different bases, and in that case they are not offering the same material. The catalog figures sit on the product hub. The tests that separate the complex from a boric acid blend are on the identity page; the market questions are on the compliance page; the boron method is described in the ICP-OES note and the ligand method in the HPLC note. The quality page sets out how a lot is released. ### 02 5% or 10% boron: choosing a boron bisglycinate grade URL: https://nutrition.rainwoodbio.com/products/minerals/boron-bisglycinate/grades/ Reviewed: 2026-11-19 Boron bisglycinate is bought on its elemental boron content, and the two commercial standards are 5% and 10% boron. The higher figure is not a purer material: it is a different ratio of boron to ligand, so it halves the powder weight needed for a given boron dose. Grade, particle size and any carrier then decide the fill, the flow and the label. In one lineThe grade is a boron-per-gram decision: 10% boron halves the powder weight for the same dose and leaves less ligand in the capsule. ## Why the same product is sold in grades The glycine–boron complex has no single CAS number and no fixed molecular weight, so "boron bisglycinate" on a purchase order does not state how much boron the powder contains. Suppliers standardise the material at a boron figure and sell it against that figure. The 5% grade is the one the catalog specification describes; the 10% grade is the same chemistry pushed to a higher boron load. The two grades exist because the dosage form pulls in opposite directions. A capsule has room for a few hundred milligrams and no more; a tablet needs flow and compressibility; a powder blend needs the ingredient to disperse evenly at a low inclusion. The boron figure decides how much powder a dose costs, and the ligand share decides how much of everything else the formula has to carry. A third variable is physical, not chemical: milled powder, granulated powder and a diluted premix can all be 5% boron and still behave differently on a tableting press. The grade is therefore a specification, not a brand name, and it should be written into the order with the boron figure and the particle size. ## The grades side by side Boron bisglycinate grades and what each one changes | Grade | Boron | Powder per 1 mg boron | Fits | Watch | 5% standard | 5.0–6.0% | 17–20 mg | Capsules, tablets, blends | The catalog grade; the reference specification | 10% high-load | Around 10%; the limit is agreed | 10 mg | Small capsules, high-dose formats | Separate specification; ligand share falls | Granulated 5% | 5.0–6.0% | 17–20 mg | High-speed tableting, dusty blends | Mesh and bulk density move; assay does not | Diluted premix | Below 5% | More than 20 mg | Very low-dose blends | Carrier, label and fill weight all change The last row is a different purchase, not a repack of the parent powder. A diluted grade carries a carrier that has to be declared, and the label claim is built on the boron figure of the premix, not on the figure of the parent powder. ## What the powder is like to handle The catalog material is a white to off-white, free-flowing powder, soluble in water with a slightly acidic solution, and ≥95% passes 40 mesh. Solubility is what makes the 5% grade easy to use in a drink mix; it is also why an opened pouch needs to be resealed, because the powder takes up moisture and the loss on drying moves toward its 5.0% limit. Bulk density is not the same on every grade, and it should be measured on the lot rather than taken from a data sheet written for a different mill setting. Two powders with the same boron figure can fill a capsule at different weights, which is why the capsule fill trial uses the actual lot. Dust and static are practical issues at 40 mesh: a granulated grade flows better and generates less dust, while its dissolution in a stick pack is slower. Colour is a weak specification line on a white powder, but it is not useless. A batch that is noticeably off-white against its predecessor can point to a different drying step; the boron figure may still be in range. Record the appearance and compare it, rather than rejecting on a photograph. ## Dose arithmetic and the fill At 5% boron, one milligram of boron sits in about 20 mg of powder. At 10%, it sits in about 10 mg. A formula that declares 3 mg of boron per capsule therefore needs about 60 mg of the 5% grade or about 30 mg of the 10% grade. Neither figure is advice on intake; both are the arithmetic that links the label claim to the weigh-up. The arithmetic has a second consequence. A 500 mg capsule filled with 60 mg of the 5% grade leaves 440 mg for the carrier, the flow agent and any other ingredient, and the blend has to be uniform at a 12% inclusion. The 10% grade halves the powder weight but not the uniformity problem, and at very low inclusion a granulated or diluted premix can disperse better than a fine powder. The formulator chooses between a smaller capsule and a more even blend. Tablets add compression to the list. A powder that passes 40 mesh may still need granulation to run on a high-speed press, and granulation changes the bulk density and the mesh while leaving the boron figure alone. The label, in turn, declares boron as the element and names the form in parentheses, so the grade does not change the claim but does change the number of milligrams of ingredient behind it. ## What to write into the specification - "Boron bisglycinate, glycine complex; grade standardised at 5.0–6.0% elemental boron by ICP-OES." - "Glycine by HPLC reported with the basis; the glycine-to-boron ratio calculated and reported." - "Identification by infrared spectrum against a reference; no added boric acid or borate." - "Loss on drying ≤5.0%; appearance white to off-white, free-flowing." - "Particle size ≥95% through 40 mesh; granulated on request with the mesh stated." - "Heavy metals and microbiology as listed; pack, lot code and specification revision on the certificate." We supply the 5% grade. The 10% grade and any diluted or granulated variant are separate specifications, and the boron figure has to be agreed in writing before the order, because it changes the fill weight that the label is built on. ## When a different grade is the wrong choice If the capsule is already full, a higher boron grade does not solve the problem on its own: the dose per capsule has to be legal and sensible, and the label has to state the boron figure that the fill actually delivers. If the blend is very low dose, a fine 5% powder can segregate in the hopper, and a granulated or diluted grade is the practical answer. If the label names the glycinate complex, a diluted premix may still be the right ingredient as long as the carrier is declared and the specification says so. What is not acceptable is a switch of grade at the last minute, after the label and the capsule size have been fixed. The grade decision belongs with the formula, the fill trial and the label, in that order. The product hub carries the catalog figures. The COA page shows how boron and glycine are reported; the complex-versus-citrate comparison takes the ligand question further; the identity page gives the tests behind the form; the ICP-OES note describes the boron method. ### 02.1 Boron bisglycinate vs boron citrate: the complex, the boron and the fill URL: https://nutrition.rainwoodbio.com/products/minerals/boron-bisglycinate/grades/boron-bisglycinate-vs-boron-citrate/ Reviewed: 2026-11-19 Both materials deliver boron, but they are different complexes with different ligands. Boron citrate is traded under CAS 74231-02-0 with a published formula of C6H5BO7 and about 5.4% boron; boron bisglycinate is a glycine complex with no single CAS, standardised at 5.0–6.0% boron. Because the two are standardised at similar boron figures, the capsule fill for a given dose comes out close. The ligand decides the identity, the solution, the label name and the route, not the milligram weight. In one lineThe boron figure sets the fill and the ligand sets everything else: identity, solution, label name and the market route. ## Two complexes, two identities Boron is a metalloid, not a metal, so neither material is a chelate in the sense that a zinc or copper bisglycinate is; the word is trade usage for a boron–ligand complex. Boron citrate pairs boron with citric acid, boron bisglycinate pairs it with glycine, and neither is a simple salt with one cation and one anion. The ligand is part of the identity. The paperwork differs accordingly. The citrate has a CAS number and a formula a specification can cite; the glycinate has neither, so its specification states the boron figure and the ligand identity and proves both. A certificate for one material does not describe the other, even when the boron percentages agree. Boron bisglycinate and boron citrate compared | Property | Boron bisglycinate | Boron citrate | Ligand | Glycine | Citric acid | CAS number | None for the complex | 74231-02-0 | Formula line | Not fixed; the boron figure carries the specification | C6H5BO7, about 199.9 g/mol | Boron content | 5.0–6.0%; a 10% grade is also sold | 5.0–6.0% | Water solution | Soluble; slightly acidic | Soluble; pH set by the grade | Label name | Boron glycinate or boron bisglycinate | Boron citrate | Identity evidence | Infrared spectrum plus glycine by HPLC | Infrared spectrum plus citrate ## The boron figure is the common currency Five per cent is a trade convention, not a natural constant. The citrate formula works out at 5.4% boron, and the commercial grade is bracketed at 5.0–6.0% for hydration and excess ligand. The glycinate has no formula to calculate from, so its boron figure is set by the reaction ratio and the drying step, and the 10% grade is a deliberate move up that scale. Because the element is the same, the arithmetic that matters is the same. One milligram of boron is one milligram of boron whichever ligand carries it, and an intake assessment expressed as boron applies to the element rather than to the complex. That is convenient for the formulator and easy to misread on a label: the milligram figure in the supplement facts panel is boron, while the ingredient weight on the batch record is ten to twenty times larger. ## What each one takes in fill weight At 5% boron a 3 mg dose needs about 60 mg of either complex; at 10% the same dose needs about 30 mg of the glycinate. Those are arithmetic illustrations, not recommendations: the grade, not the ligand name, sets the powder weight. The fill weight then sets the dosage form. A 500 mg capsule carrying 60 mg of powder leaves room for carrier and flow agent, and the blend has to be even at a 12% inclusion. Halving the powder weight with a 10% grade frees space but does not fix segregation, and a granulated grade disperses better at very low inclusion. A tablet adds compression: either complex may need granulation if the press runs fast, which changes the mesh but not the boron figure. Fill weight is also where a supplier switch shows up. Two lots that both pass 5.0–6.0% boron can differ by a fifth in the powder needed for the same claim, one sitting at the bottom of the window and the other at the top. The weigh-up should use the lot result, not the midpoint of the specification. ## Solution behaviour and pH Both complexes are used in aqueous formats, and the solutions are not interchangeable. The glycinate solution is slightly acidic. The pH of a citrate solution is not fixed by the ligand name: commercial grades are specified from mildly acidic to near-neutral, because the complex is made from boric acid and citric acid and the ratio and the hydration vary. The pH of the grade in front of you belongs in the specification, not the reputation of the ligand. The boron–ligand bond in water is an equilibrium, not a fixed structure. Dilution, pH and temperature all shift how much boron stays bound, which is why a concentrated stock and a finished drink are two different stability questions. A clear solution should be tested at the actual pH rather than assumed from the solubility figure. For a capsule, solubility is a minor line: the powder is swallowed, not dissolved. For a stick pack or a drink it moves to the front of the specification, which makes it the cleanest basis for choosing a ligand. ## What the label and the file have to say A US supplement facts panel states boron in milligrams and puts the form in parentheses after the word boron, so "boron (as boron glycinate)" and "boron (as boron citrate)" are different declarations of the same element. The ingredient name on the panel has to match the material in the batch record, and a switch of ligand is a label change, not a purchasing detail. In the European Union, boron appears in Annex I of Directive 2002/46/EC and the permitted forms are listed in Annex II, so the buyer's team checks whether the exact complex is one of the named forms. That is separate from the novel-food question: a 2025 consultation concluded that boron glycinate and boron bisglycinate are novel foods under Regulation (EU) 2015/2283, and the current record and texts should be checked as of the shipping date. The citrate side follows the pattern of any other citrate mineral: the salt name, the hydrate and the elemental figure each carry part of the label, as the calcium citrate and magnesium citrate specifications show. ## When to choose which Choose the glycinate when the label names it, the file covers it, and the formula is built around an amino acid ligand. Choose the citrate when the label and the market file already name it, or when a citrate carrier suits the blend. Neither is a drop-in for the other. A switch changes the ingredient name, the identity tests, the solution pH, the regulatory reference and, if the grade changes with it, the fill weight. It needs a change-control record, a fresh specification and a label review before the first batch, not a note on the purchase order. The catalog specification is on the product hub; the grade arithmetic is on the grades page; the certificate lines are on the COA page; the tests behind the form are on the identity page; the route questions are on the compliance page. The methods library covers the ICP-OES and HPLC methods, and the quality page describes the release file. ### 03 Boron bisglycinate stability: moisture, pH and the pack URL: https://nutrition.rainwoodbio.com/products/minerals/boron-bisglycinate/stability/ Reviewed: 2026-11-19 Boron bisglycinate keeps well as a dry, sealed powder. The catalog limit on loss on drying, ≤5.0%, governs release; it is not a budget for moisture picked up in a warehouse. The two things that genuinely shorten a shelf life are an opened pouch and a solution left standing, and any retest period has to be earned in the pack that will be sold. In one lineDry and sealed the powder holds; an open pouch, a warm store and a held solution are what change the numbers. ## The powder: water is the variable that moves In a 5% boron powder, most of the mass is ligand and water, and water is the part that changes first. Once the pouch is open the powder meets room humidity, and loss on drying climbs from its release figure toward the 5.0% limit. Boron is reported on the powder as received, so two per cent of absorbed water takes about two per cent off the boron figure while the boron in the bag is unchanged. The weigh-up moves with it. Water changes behaviour as well as assay. A damp powder cakes, feeds unevenly through a dosator and can stick to a punch face; it is also the condition in which the microbiology limits stop being academic. Reseal the pouch, press the air out, and finish the remainder inside the in-use window written for the pack. A desiccant is an aid in a humid room; it is not a barrier. Colour gives a rough read on history rather than on quality. White to off-white covers a wide span, so a shade darker than the previous lot is not automatically a failure. A batch that has darkened and set into lumps deserves a repeat of moisture and boron before it goes to the line. ## The solution: an equilibrium that keeps moving The complex dissolves in water to give a slightly acidic solution. In solution the boron–ligand bond is not frozen: dilution, pH and temperature shift how much boron stays bound, and other solutes can compete for the ligand. A dissolved batch is not the powder in another form, and a stock that has stood for a day is not the solution that was made. Where a liquid format is unavoidable, make it at the point of use, give it the shortest validated hold, and measure appearance and pH across that hold. A preservative chosen for a near-neutral drink may not work at the solution's real pH, and a buffer added to correct the pH changes the complex it was meant to protect. The hold time is measured for that matrix, not borrowed. For a product that will sit on a shelf, the solid is the simpler format: a capsule or a stick pack keeps the powder dry until the consumer opens it, and the moisture question passes to the pack. ## What moves the numbers in storage Storage variables for boron bisglycinate | Variable | Effect | What to do | Water | Lifts loss on drying and dilutes the as-is boron figure | Keep the foil pouch sealed; store dry; reseal after use | Heat | Speeds up moisture pickup and any reaction in the matrix | Controlled store; cool process; never a hot loading bay | pH in solution | Moves the balance between bound and free boron | Measure the matrix pH; buffer only with data | Dilution | Pushes the complex equilibrium in a stock | Make fresh; validate the hold | Reducing sugars | React with glycine under heat, and browning follows | Check the matrix; keep the heat load low | Seal and headspace | Decide the moisture barrier and the air the powder sits in | Intact liner; controlled opening; lot kept with the pack These variables compound. Heat and humidity reinforce each other, so a warm, damp store is more than the sum of two separate effects, and a sweetened drink at a raised pH brings the ligand reaction and the solution equilibrium into the same container. The question worth asking is not whether the material is stable but in which pack, in which matrix, for how long. ## A protocol that can be defended Write the pack, the storage conditions, the sampling points and the tests into the protocol before the first sample goes in. The warehouse arm is 25 °C at 60% relative humidity; 30 °C/65% covers a hotter market; 40 °C/75% is the accelerated arm that presses on the seal and liner. For a liquid format, add an arm at the matrix pH. At each point, run boron by ICP-OES, glycine by HPLC, loss on drying, appearance, the infrared identity and microbiology. Boron and glycine together show whether the complex is intact; moisture shows whether the pack admitted water; the infrared spectrum shows whether the solid is the same material. A summary that says only "within specification" does not let a reader separate those questions. Ask for the data on the pack being bought. A 1 kg pouch and a 25 kg drum differ in headspace, in how often they are opened and in surface-to-volume ratio, so results generated in one do not describe the other. ## The matrix decides more than the powder does Water activity inside a capsule is low, yet the shell and the excipients still move moisture, and a hygroscopic filler can pull water toward the fill. Measure loss on drying at release and again after storage, and look at the fill for caking. A stick pack lives or dies on its seal: a pinhole defeats the barrier and no assay on the bulk powder will reveal it, so the strip is inspected as well as the fill. A beverage adds pH and heat. The solution equilibrium, the preservative system and any reducing sugar act at once, and a hot fill puts the mix through a heat load the bulk powder never meets. Whether an overage is justified is a formulation and label question, and no overage compensates for a pack that admits water. Blends carry a separate risk. A powder that separates in the hopper delivers a variable boron dose even when every lot is in specification, and the remedy is granulation or a more uniform carrier, not a tighter assay limit. The dose at the end of the run is not the dose at the start. ## How the retest period is assigned No single shelf-life figure is published here, because the pack and the storage condition define it. The retest period we assign is written on the specification and rests on stability data generated in that pack. A figure quoted with no pack, no storage condition and no test panel is an intention rather than a shelf life. When the retest period runs out, the retained sample is re-assayed before any extension. An extension is a data decision, and a bulk figure does not follow the powder into a container we did not pack. The product hub lists the packs we supply; the COA page lists what is tested at release; the MOQ page sets out the packs and the dispatch window; the ICP-OES note covers the boron assay; the quality page describes the release workflow. ### 04 Boron bisglycinate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/boron-bisglycinate/moq/ Reviewed: 2026-11-19 The minimum order is 1 kg in a foil pouch, the bulk pack is a 25 kg fiber drum, and the standard lead time is 1–7 days. The 5% and 10% boron grades are separate specifications, so the grade belongs in the enquiry before a pack is booked. Everything else on this page follows from those three numbers. In one lineA kilogram is the smallest quantity that carries its own lot code, certificate and retained sample; the grade has to be named before that pack is built. ## Why the run starts at one kilogram One pouch divides into three useful portions: the trial itself, a portion kept for reference, and a portion an outside laboratory can test without consuming either of the others. That is what turns a pack into a qualification unit rather than a scoop of powder, and it is also why the pouch ships as a parcel instead of a pallet. Anything smaller is normally cut from a larger lot and repacked. The material does not change, but the pack identity does, and a split has to be recorded as a repack rather than sold as a catalog pack. The 25 kg drum is the other end of the same logic: less handling per kilogram, more capital tied up in inventory, and a longer stretch between the first and last use. The floor comes from the pack, not from an attempt to push volume. ## Packs, grades and formats Packs supplied for boron bisglycinate | Pack | Grade | Net weight | Typical use | Foil pouch | 5% or 10% boron | 1 kg | Trial, retain, small batch | Fiber drum | 5% or 10% boron | 25 kg | Production | Granulated powder | Grade as agreed | On request | Tableting and dust control | Diluted premix | Boron figure as agreed | On request | Very low-dose blends The catalog material is a white to off-white powder at 5.0–6.0% boron, ≥95% through 40 mesh, packed in a pouch with a moisture barrier. Granulation and dilution are changes to the specification rather than to the bag: both move the mesh or the boron figure, and both have to be written into the specification before the certificate is issued. If the dosage form needs a coarser powder or a lower boron figure, raise it at the enquiry stage. ## Lead time, dispatch and documents Order confirmation starts a 1–7 day window that covers picking, paperwork and dispatch. Transit, customs clearance and the customer's own quality release sit outside it. A granulated or diluted grade adds preparation time, and a first shipment to a new destination usually adds document work as well, so the two are quoted separately rather than folded into the standard figure. Ask for a dispatch date rather than a lead time alone. A drum may travel on a pallet while a pouch travels as a parcel, and the trade term decides who books freight and who handles customs. The certificate and the specification should be on their way with the lot; a document set that arrives after the material has already delayed the receiving inspection. ## What makes an enquiry quotable Six points turn an enquiry into an offer that can be compared with another: - Material and grade. Boron bisglycinate at 5.0–6.0% boron, or the 10% grade, with the figure written out rather than implied by the product name. - Specification revision. Boron, glycine, moisture, mesh, metals and microbiology, and the version the certificate will be issued against. - Number of packs. Pouches or drums, and whether a granulated or diluted variant is wanted. - Destination and trade term. Country, port or address, and the Incoterm. - Documents. COA, specification, safety data sheet and any statement the importer has to hold. - Use and market. Capsule, tablet, blend or liquid, and the country where the finished product will be sold. An enquiry without the grade cannot be checked against a specification, and one without the market cannot be checked against a route. Commercial terms are given on the quotation, not on this page. ## A sample that can be defended The pouch is the qualification sample. Run boron, glycine, moisture and microbiology on it before scaling, and keep material back from the same pack. The lot code should be identical on the sample label, the certificate and the quotation; if it differs, the sample does not qualify the lot it was drawn from. A bench trial that needs less than a kilogram should be discussed before the order: material cut from a bulk lot becomes a repack with its own traceability and should be documented as one. It is also worth asking whether the trial pouch and the production drum will be drawn from the same lot family, since a successful trial on another lot is only half a qualification. ## Terms beyond the quotation The quotation sets the commercial terms, the pack, the dispatch window and the document set. The quality terms sit beside them: which specification revision applies, a certificate for every lot, material kept for reference, the retest period, and the route for a source or process change. A quality agreement is easier to settle before the first production order than after the first disagreement. Returns and replacements follow the quotation and that agreement. A lot that fails the agreed specification is settled on the retained sample with a joint re-test rather than on a photograph of the powder, and it helps to agree in advance which laboratory both sides accept and who commissions the referee test. The catalog figures sit on the product hub; the release tests are on the COA page; the grade arithmetic is on the grades page; the market questions are on the compliance page. The MOQ glossary entry defines the term, and the logistics page covers shipping and documents. ### 05 The regulatory file for boron bisglycinate URL: https://nutrition.rainwoodbio.com/products/minerals/boron-bisglycinate/compliance/ Reviewed: 2026-11-19 Boron is a mineral with a permitted-forms list, and boron bisglycinate is a complex that may not appear on that list by name. The file therefore has to answer two questions separately: whether the form can be sold as a food or supplement ingredient in the destination, and whether the label, the dose and the contaminants comply there. The specification and the certificate answer neither question on their own. In one lineThe specification says what the powder is; the route question is whether the destination permits that form at that dose, and that question belongs to the buyer's regulatory team. ## What the file is for A regulatory file has to pin down what is being bought, which lot is being shipped, which limits and label rules the finished product meets, and what happens if a source, a process or a pack changes. The certificate covers the lot, the technical data sheet covers the specification, the safety data sheet covers handling, and none of them covers the route. Two properties shape this file. The complex has no CAS number, so identity rests on the name, the boron figure and the ligand evidence. And boron has more than one permitted form in several markets, so the complex has to be matched against the list rather than inherit the status of the element. ## European Union Food supplements sit under Directive 2002/46/EC. Annex I of that Directive lists boron among the minerals that may be used, and Annex II lists the forms in which each mineral may be added; the buyer's team checks whether the glycine complex is one of the forms named for boron, because a complex does not automatically follow from the element. General food law (Regulation (EC) 178/2002), food information (Regulation (EU) 1169/2011) and the contaminant regulation (Regulation (EU) 2023/915) apply alongside. The second gate is Regulation (EU) 2015/2283. A novel-food consultation concluded in 2025 that boron glycinate and boron bisglycinate are novel foods under Article 3(2)(a)(i) and (ix), on the ground that significant consumption in the Union before 15 May 1997 had not been demonstrated. That conclusion is a route question about the ingredient, not a statement about a particular lot, and it sits with the business placing the product on the market. Check the current consultation record and the current text of both instruments as of the shipping date, because a list and a status can change. Great Britain and Northern Ireland are outside that framework and are checked on their own terms. ## United States In the United States the material would be sold as a dietary ingredient in a dietary supplement. The Supplement Facts panel declares boron in milligrams and names the form in parentheses, and the ingredient must be lawful under the Federal Food, Drug, and Cosmetic Act as amended by DSHEA: either a dietary ingredient marketed before 15 October 1994, or a new dietary ingredient supported by a notification under 21 U.S.C. 350b. The supplier can state the basis it relies on; the buyer confirms that it reaches the finished product, the dose and the form. Manufacturing is covered by the dietary-supplement cGMP rule in 21 CFR 111, and the labelling rule for the panel sits in 21 CFR 101.36. A structure/function statement needs the DSHEA disclaimer, and a statement that the product diagnoses, mitigates or prevents a disease makes it a drug rather than a supplement. That review is separate from the certificate. ## Limits and the finished-product calculation A contaminant result on the drum is not a compliance answer until it has been converted to the dose. The table gives the usual supplement references; the text in force at the destination and the daily dose settle the final figure. Contaminant references for a supplement file | Parameter | Usual supplement reference | Conversion to show in the file | Lead (Pb) | 3.0 mg/kg | Result × powder weight per daily dose | Cadmium (Cd) | 1.0 mg/kg | Result × powder weight per daily dose | Mercury (Hg) | 0.10 mg/kg | Result × powder weight per daily dose | Arsenic (As) | Set by the customer or the market | The agreed figure, stated on the certificate At 3.0 mg/kg lead, a capsule carrying 60 mg of the 5% grade contributes 0.18 µg. A higher daily powder weight multiplies the same lot into a larger figure, which is why a result that passes at one dose can fail at another. Boron itself has a tolerable upper intake level in the European risk assessment, set for the element rather than for the complex. The reader should check the current opinion for the value and the age groups, then convert the label dose into boron and compare. This page does not set a dose and does not offer one. ## Claims and the label No disease-related claim is made for this material, and none should be inferred from these pages. In the European Union a health claim has to come from the authorised list under Regulation (EC) 1924/2006 and be used under its conditions; whether any claim is available for boron is a question for that list, not something the specification can supply. In the United States a structure/function statement has to be truthful, not misleading, and accompanied by the disclaimer; the same wording that is acceptable in one market is not automatically acceptable in another. The label also carries the ingredient name, the boron figure, the form in parentheses and the dose. A claim review does not change the specification, and a certificate does not approve a claim; the two reviews are kept apart. ## Documents the file should hold Document set for a boron bisglycinate order | Document | What it answers | Specification, with revision | The boron figure, the glycine line, moisture, mesh and the contaminant limits | Certificate of analysis, per lot | The results for the pack being shipped, with methods | Technical data sheet | Solubility, appearance, packing and storage | Safety data sheet | Handling, dust and transport classification | Origin, allergen, GMO and residual-solvent statements | The declarations the importer has to hold | Source declaration | That the boron is supplied as the glycine complex, with no boric acid or borate added ## Checklist before the first shipment - The specification revision, grade and boron figure are named on the order. - The lot certificate carries boron, glycine, moisture, metals, microbiology and mesh. - The form is matched against the permitted-forms list, and the novel-food or dietary-ingredient basis is on file. - The contaminant figures are recalculated at the daily dose, and the boron dose checked against the current intake assessment. - The label and any claim are reviewed for the destination, separately from the certificate. - Source, process and pack are under change control, and quotation, specification and certificate share one version. The catalog specification is on the product hub; the analytical evidence is on the identity page; the certificate lines are on the COA page. The EU and US regulatory notes give the framework references, and the quality page describes the release file. ### 06 Proving a boron bisglycinate lot: name, spectrum, boron and glycine URL: https://nutrition.rainwoodbio.com/products/minerals/boron-bisglycinate/identity/ Reviewed: 2026-11-19 A lot is boron bisglycinate when four things agree: the document names the complex and the grade, the infrared spectrum matches the glycine–boron reference, the boron figure sits inside the declared window, and the glycine figure supports the ratio the specification states. Boron by ICP-OES on its own cannot separate the complex from boric acid, sodium borate or a glycine blend. With no CAS number to quote, those agreeing measurements are the identity. In one lineWith no CAS number to cite, identity rests on four agreeing measurements: the name, the infrared spectrum, the boron figure and the glycine figure. ## The layers of the identity Each layer answers a different question, and one result closes only one layer. A supplier who answers the first has described the paperwork; a supplier who answers all five has described the powder. Identity layers for boron bisglycinate | Layer | Question | Test | What it establishes | Document | Is the complex and the grade named? | Product name, boron figure, specification revision | What is being bought | Infrared | Is glycine bound to boron? | IR against a reference spectrum | The coordination, not the element | Boron | How much of the element is present? | ICP-OES | Quantity | Glycine | Is the ligand present in the declared proportion? | HPLC plus the calculated ratio | The ligand, not the solid form | Balance | Is anything else in the drum? | Moisture, ash where measured, impurities | Whether the numbers add up The infrared layer is the one buyers most often skip, because it is the hardest to read from a certificate that says only "conforms". A spectrum of glycine and a spectrum of boric acid are not the same as a spectrum of the complex, and a physical mixture shows the sum of its parts. Ask for the spectrum, not only the word. ## The glycine-to-boron ratio The ratio is arithmetic on two measured results: moles of glycine divided by moles of boron. Boron has an atomic mass of 10.81 and glycine a molar mass of 75.07, so 100 g of powder at 5.3% boron carries 0.49 mol of boron. If the same 100 g reports 88% glycine, that is 1.17 mol of ligand and a ratio near 2.4. Those figures are an illustration, not a specification: they show how the two results combine into a single number that a buyer can compare across lots. That number is a fingerprint rather than a molecular constant. The commercial complex is not a single stoichiometric salt, and the material typically carries ligand in excess of what a simple adduct would need, which is why the specification states a ratio to be held rather than a formula to be calculated. The catalog sets boron and asks for glycine to be reported; the ratio is calculated from the lot results and agreed with the supplier. The ratio is also the most sensitive test for a blend. Boric acid carries about 17.5% boron, so a small addition lifts the boron figure and drops the ratio sharply; free glycine lifts the ratio and pushes boron toward the bottom of the window. Either change can leave the boron percentage inside 5.0–6.0%, and only the pair reveals it. ## X-ray diffraction: what it can and cannot show X-ray diffraction is not the identity test for this material. The complex may be amorphous, partly crystalline or a mixture, and a diffraction pattern without a reference phase cannot say which. A certificate that reports "XRD conforms" without the pattern, the reference and the detection limit has added a word rather than evidence. Where XRD earns its place is on the adulterant side. Boric acid and sodium borate are crystalline and give sharp, recognisable patterns, so a scan can confirm or exclude a crystalline borate phase in a powder that also contains the complex. That is a narrower question than identity, and it is a useful one when a boron figure has moved without an explanation. Ask what the laboratory compared against, and at what limit. A phase present below the detection limit will not appear, and a report that omits the limit has told the reader nothing about how much could be there. ## What substitution looks like Signals of common substitutions in boron bisglycinate | Substitution | Why it is used | Signal | Test | Boric acid | Lifts boron at low addition; acidic | Ratio falls; solution more acidic; IR mismatch | IR, ratio, pH | Sodium borate | Lifts boron; soluble | Sodium appears where the complex has none | Sodium by ICP-OES | Free glycine | Bulks the powder; improves flow | Ratio rises; boron near the low edge | Ratio, IR | Carrier | Dilutes a strong lot or a premix | Boron and glycine both fall; moisture or ash rises | Mass balance, IR | Water | None; it is pickup, not addition | Boron falls as-is; loss on drying rises | Loss on drying Colour is the weakest signal of the five. A white powder can be the complex, a boric acid blend or a diluted premix, and no photograph separates them. The sodium figure, the ratio and the infrared spectrum are what carry the identification, which is why a certificate that reports only boron has left the most likely substitution untested. ## Writing the identity into the specification - "Boron bisglycinate, glycine complex, standardised at 5.0–6.0% elemental boron by ICP-OES; no single CAS applies." - "Identification by infrared spectrum against a glycine–boron reference." - "Glycine by HPLC, reported with the basis; the glycine-to-boron ratio calculated and reported." - "Loss on drying ≤5.0%; appearance white to off-white, free-flowing; ≥95% through 40 mesh." - "No added boric acid or borate; sodium reported where borate is suspected." - "Crystalline borate phase screened by XRD on request, with the detection limit stated." The clause about added boric acid is the one to keep in every revision. If the powder is blended after the complex is made, the blender owns the blend and issues the certificate, and the complex maker's certificate no longer describes the drum. ## Five questions for the supplier - What boron and glycine results belong to this lot, on what basis, and what ratio do they calculate to? - Can you send the infrared spectrum and the reference it was compared against? - Is the lot a single complex or a blend? If it is a blend, what else is in it and in what proportion? - What is the sodium result, and does any crystalline borate appear in an XRD scan? - If the form is contested, will you re-test the retained sample jointly with us? Those five answers, taken together, are an identity file; a boron percentage on its own is not. The product hub carries the catalog figures; the COA page shows how each result is reported; the grades page works through the boron figure; the complex-versus-citrate page covers the ligand choice. The ICP-OES note and the FTIR note describe the methods, and the quality page describes the release file. ### 01 What the chromium nicotinate certificate has to show URL: https://nutrition.rainwoodbio.com/products/minerals/chromium-nicotinate/coa/ Reviewed: 2026-11-19 A chromium nicotinate certificate reports appearance, identification by infrared and HPLC, the complex assay by HPLC, chromium by complexometric titration, loss on drying, particle size, the heavy-metal panel and microbiology. Each line needs its method and its release limit, and the batch result belongs in a column of its own. The chromium figure is 12.0–12.8% and the assay is 98.0–102.0%; they are separate gates on the same lot, not two ways of writing one number. In one lineThe certificate has to show two numbers and one ligand: chromium by titration, the complex by HPLC, and an infrared spectrum that names the nicotinate. ## The certificate as a test report A certificate is auditable when every row names the test, the method and the limit the lot was released against. A row that says only “conforms” asks the reader to accept a conclusion without the evidence behind it. Three rows carry the identity of this material: the infrared and HPLC identification, the complex assay and the chromium figure. Chromium nicotinate is a chromium(III) coordination complex with three nicotinate ligands, formula C18H12CrN3O6 and CAS 64452-96-6. Infrared and HPLC see the ligand from different directions: the spectrum is compared with a reference, while the chromatogram places the nicotinic acid at its own retention time. Neither test is a purity assay, and neither is a substitute for the chromium figure. Identity, assay and physical limits · chromium nicotinate | Parameter | Method | Release limit | Appearance | Visual | Grey-green, free-flowing powder | Identification | IR and HPLC | Conforms to reference | Assay (complex) | HPLC | 98.0–102.0% | Chromium (Cr) | Complexometric titration | 12.0–12.8% | Loss on drying | Gravimetric | ≤1.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh The limits above are the catalog specification. The lot certificate is the document that shows a particular drum met them, and the lot code on the certificate has to match the pouch, the drum and the retained sample. ## The assay basis and the chromium arithmetic The certificate should state whether the 98.0–102.0% assay is calculated on the powder as received or on the dried basis. With a 1.0% loss-on-drying ceiling the two bases differ by at most about one percentage point; it is still a different number, and the basis belongs in the assay row rather than in a footnote. The chromium line can be checked against the formula. Three nicotinate ligands and one chromium atom give a theoretical chromium content of 12.43%. A complex at 98.0% assay carries about 12.18% chromium, and one at 102.0% carries about 12.68%. The 12.0–12.8% catalog window brackets that arithmetic, which is why the two numbers are read together: a chromium result near an edge with an assay in the middle deserves a question, and a chromium result outside the window with a normal assay points to a second chromium source, a dilution or a calculation error. The methods are not interchangeable. Complexometric titration measures the metal after the sample is prepared; it does not see the ligand. The ligand evidence is the infrared spectrum and the HPLC result, so a certificate that reports chromium but no ligand line has measured a metal content, not a named complex. ## Release limit versus batch result The release limit is the boundary the lot was accepted against; the batch result is what the laboratory measured. Both belong on the page, in separate columns, with the method beside them. A result column filled with the specification range is not a result; it is the gate copied across. The lines are not all the same shape. Assay and chromium are windows, loss on drying and the heavy-metal limits are ceilings, identification is pass or fail, and the microbiological lines combine a count with an absence statement. The certificate should keep those shapes rather than turning every parameter into a range. What the result column should carry · chromium nicotinate | Parameter | Release limit | Result column | Assay | 98.0–102.0% | The measured percentage and its basis | Chromium | 12.0–12.8% | The measured percentage and the titration method | Loss on drying | ≤1.0% | The measured percentage | Heavy metals | Per element | A figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot | Particle size | ≥95% through 40 mesh | The measured percentage through the sieve ## What moves between batches The reaction, the crystallisation and the drying step move the chromium result and the colour. The specification allows a grey-green powder, which is a wide window; a batch that is noticeably darker, duller or browner can reflect a different drying end-point or a trace of unreacted ligand while the assay still passes. Colour is a reason to read the batch record, not a rejection on its own. Milling and sieving move the particle-size line without changing the chemistry. A mill change can shift the 40 mesh result while the assay and the chromium figure stay in place, and the flow on a capsule line will move with it. A trend across lots says more than one result near an edge: chromium drifting low while the assay holds, loss on drying climbing toward the ceiling, or a new peak in the chromatogram. The lot code on the certificate should match the pack, and the retained sample should come from the same lot. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a disputed result, or a ligand claim that the supplier's certificate does not prove. The useful panel is not a full repeat of the certificate: infrared for the ligand, HPLC for the complex and the nicotinic acid, chromium by ICP-OES as a cross-check on the titration, loss on drying, ICP-MS for the heavy metals, and microbiology. Ask the laboratory to report its detection limit for every screen it reports as “not detected”. A limit tells the reader what the method could have seen; a bare absence statement does not. Chain of custody matters as well: the sample tested should be the retained sample, and the report should carry the lot code. ## What to compare between suppliers Put six lines side by side: the declared ligand and CAS number; the assay result and its basis; the chromium result and the method; the identification results by infrared and HPLC; loss on drying and particle size; and the pack, the lot code and the traceability from certificate to drum. Two offers that agree on chromium but differ on the ligand are not the same material. The catalog specification sits on the chromium nicotinate product page. The tests that separate the nicotinate from another chromium source are on the identity page; the market file is on the compliance page; the titration method is described in the complexometric titration note; the release workflow is on the quality page. ### 02 Chromium nicotinate, picolinate or chloride: choosing the source URL: https://nutrition.rainwoodbio.com/products/minerals/chromium-nicotinate/grades/ Reviewed: 2026-11-19 Chromium nicotinate, chromium picolinate, chromium chloride and the niacin-bound blends sold as chromium polynicotinate are different sources of the same element, and the source is the ingredient that appears on the label. Chromium nicotinate is specified at 12.0–12.8% elemental chromium as a grey-green powder that is only slightly soluble in water; the picolinate is specified at 12.2–12.4% and is purple-red; the chloride hexahydrate carries about 19.5% and dissolves freely. The choice turns on the dosage form, the label name and the permitted-source check before it turns on the chromium percentage. In one lineThe source is a label decision before it is a specification decision: the ligand decides the name on the pack, the identity tests and the permitted-source check. ## The source is the ingredient Chromium is the nutrient on the panel; the compound is the ingredient in the ingredient list. A line that declares “chromium 200 µg” does not say which powder was weighed, and at this dose the powder weight is small enough that the dilution, not the drum, is what the capsule contains. The ligand also decides what a laboratory can prove. Chromium nicotinate is a defined complex with a CAS number, a formula and a chromium figure that can be checked against that formula. Chromium polynicotinate is a trade term used for niacin-bound chromium preparations whose chromium and niacin content is supplier-defined; it is a family, not a single article, and it is not a synonym for the nicotinate. Those are different kinds of specification. One can be written as a formula and a window; the other has to be defined article by article, with the carrier, the niacin content and the chromium figure stated on the certificate. ## Four sources side by side Chromium sources · figure, ligand, appearance and solubility | Source | Chromium | Ligand | Appearance | Solubility in water | Chromium nicotinate | 12.0–12.8% (titration) | Nicotinate, three per chromium | Grey-green powder | Slightly soluble; more in acid | Chromium picolinate | 12.2–12.4% (ICP-OES) | Picolinate, three per chromium | Purple-red to red-brown | Sparingly soluble | Chromium(III) chloride hexahydrate | About 19.5% | Chloride; no organic ligand | Green to violet crystals | Freely soluble | Chromium polynicotinate | Supplier-defined; often near 10% | Niacin-bound; carrier varies | Varies with the carrier | Depends on the complex The table is a starting point, not a ranking. The nicotinate and the picolinate are single named compounds with published formulae, which is why their chromium arithmetic can be written down. The polynicotinate is a family: two suppliers can ship two different articles under the same trade name, and only the certificate says which one arrived. ## Colour, solubility and moisture Chromium nicotinate is a grey-green, free-flowing 40 mesh powder. The colour is a useful first check against a pale chromium salt or a purple-red picolinate, but it is not an identity test; a blend with a carrier can be tinted, and the grey-green window covers a range. Solubility is the practical constraint. The complex is only slightly soluble in water and more soluble in acidic solutions, so a clear aqueous drink is a development project rather than a stirring step. In a capsule or tablet the low solubility is an advantage: the powder stays as a solid in the fill and does not need to dissolve. Moisture is the third physical line. The 1.0% loss-on-drying ceiling is looser than the picolinate's 0.5%, and the powder still cakes if a pouch is left open in a humid room. The 40 mesh specification decides flow and blend behaviour, and a granulated grade is a separate order rather than a packing choice. ## Dose arithmetic and the dosage form At the 12.43% theoretical chromium content, 200 µg of chromium is about 1.61 mg of the complex; across the 12.0–12.8% catalog window the figure runs from about 1.56 mg to 1.67 mg. That is far below a weighable capsule quantity, so the material is used as a dilution. At 1%, a 200 µg dose is about 161 mg of blend, which fits a capsule. At 0.1%, the same dose needs about 1.6 g, which does not. The dilution ratio, the carrier and the blend uniformity therefore belong in the specification, and the assay of the blend belongs on its own certificate. The format follows the same logic. A capsule or tablet takes the 40 mesh powder or a granulated grade. A powder blend takes the diluted material and needs a uniformity check. A stick pack or a drink mix needs the powder to disperse, and the acidic-solubility note means the matrix pH has to be tested rather than assumed. ## What to write into the specification - “Chromium nicotinate, chromium(III) nicotinate, CAS 64452-96-6, C18H12CrN3O6.” - “Chromium 12.0–12.8% by complexometric titration.” - “Assay 98.0–102.0% by HPLC, with the basis stated.” - “Identification by infrared and HPLC on the lot; report the spectrum and the chromatogram.” - “Loss on drying ≤1.0%; particle size ≥95% through 40 mesh.” - “Heavy metals and microbiology as listed; no chromium source other than chromium nicotinate.” - “If a dilution: the carrier, the ratio and the chromium assay of the blend.” We supply the nicotinate. The picolinate and the chloride are separate articles with their own CAS numbers and their own certificates; a purchase order that names only “chromium” has not named any of them. ## When the nicotinate is the wrong choice The nicotinate is the wrong choice when the label already names picolinate, when the destination file is built around a different source, or when a clear solution is required at a pH the complex cannot hold. It is also the wrong choice when a buyer wants a defined complex and is offered a polynicotinate blend: the blend may be a legitimate article, but it is not this one, and its certificate should define the carrier and the chromium figure. The reverse error is just as common: buying the nicotinate because the chromium figure looks convenient while the label still says picolinate. The ingredient list and the certificate would then describe different materials, and the finished product would carry a source name the file does not support. The source comparison continues on the nicotinate versus picolinate page; the catalog specification is on the chromium nicotinate hub; the permitted-source question is on the compliance page; the identity tests are indexed under methods; the release workflow is on the quality page. ### 02.1 Chromium nicotinate vs picolinate: the ligand, the chromium and the label URL: https://nutrition.rainwoodbio.com/products/minerals/chromium-nicotinate/grades/chromium-nicotinate-vs-picolinate/ Reviewed: 2026-11-19 Chromium nicotinate and chromium picolinate have the same molecular formula, C18H12CrN3O6, the same formula weight, 418.31, and the same theoretical chromium content, 12.43%. They differ in the ligand: nicotinate is the pyridine-3-carboxylate and picolinate is the pyridine-2-carboxylate. A certificate that reports only chromium cannot tell them apart, and at a 200 µg dose the powder weight is about 1.6 mg either way. The ligand, the infrared spectrum and the label name are what separate them. In one lineThe two complexes share a formula and a 12.43% chromium figure, so only the ligand and the label name tell them apart. ## One formula, two ligands Both materials are chromium(III) complexes of a pyridinecarboxylic acid, three ligands to one metal. Nicotinic acid and picolinic acid are isomers, both C6H5NO2, and the complexes built from them therefore share a molecular formula and a molecular weight. The chromium fraction follows from the formula, so it is identical in theory: 12.43%. The catalog windows are drawn differently — 12.0–12.8% for the nicotinate and 12.2–12.4% for the picolinate — but both bracket the same theoretical figure, and neither window is narrow enough to separate the two ligands. Two certificates can both report 12.4% chromium and describe different molecules. ## The two complexes side by side Chromium nicotinate and chromium picolinate compared | Parameter | Chromium nicotinate | Chromium picolinate | CAS number | 64452-96-6 | 14639-25-9 | Ligand acid | Nicotinic acid, CAS 59-67-6 | Picolinic acid, CAS 98-98-6 | Formula | C18H12CrN3O6 | C18H12CrN3O6 | Formula weight | 418.31 | 418.31 | Chromium, theoretical | 12.43% | 12.43% | Catalog chromium | 12.0–12.8% | 12.2–12.4% | Appearance | Grey-green powder | Purple-red to red-brown | Loss on drying | ≤1.0% | ≤0.5% | Label ingredient | Chromium nicotinate | Chromium picolinate The rows that agree are the trap. The rows that differ are the material: two CAS numbers, two ligand acids, two colours, two moisture limits and two label names. A comparison that starts and ends with the chromium percentage has compared nothing that matters. ## How the ligand is proved Infrared is the first test that separates them. The position of the carboxylate on the pyridine ring changes the ring and carboxylate bands, so the spectrum of the nicotinate complex does not match a picolinate reference. The comparison has to be against the right reference spectrum; a generic “IR conforms” line proves only that someone compared it with something. HPLC is the second. The complex can be assayed as the complex, and the ligand can be measured after release; nicotinic acid and picolinic acid have different retention times, so the chromatogram names the ligand. A laboratory that reports only a chromium figure has measured the metal, not the molecule. If the ligand is named on the label, ask for the chromatogram and the reference standard used. The mass figure does not help. Because the formulae coincide, a mass-spectrometric molecular ion has the same mass for both complexes; the separation has to come from chromatography, infrared or NMR, not from a molecular weight. ## What the label has to say In the EU the ingredient list names the source, and chromium is declared in µg and as a percentage of the 40 µg reference intake. In the US the Supplement Facts panel declares chromium as the element with a 35 µg Daily Value, and the ingredient list names the source. In both markets the source name is the only place a shopper can see which ligand was used, because the chromium number is identical. That makes a swap easy to miss in a specification review. A purchase order that says “chromium 12.4%” can be met by either complex; a purchase order that says “chromium nicotinate, CAS 64452-96-6” cannot. The label, the specification and the certificate should carry the same source name, and a change of source is a label change even when the chromium per serving stays the same. One name needs care. Chromium polynicotinate covers niacin-bound preparations whose composition the supplier defines; it is not another word for the defined tris-nicotinate complex. If the label says polynicotinate, this comparison does not settle the specification. ## The chromium, the dose and the fill The dose arithmetic is almost the same for both, which is the point. At 12.43% chromium, 200 µg of the element is about 1.61 mg of either complex. The nicotinate window moves that figure by only a few percent, and the picolinate window moves it less. A 100 µg dose is about 0.8 mg, and a 1 mg dose about 8 mg. Those weights are too small to weigh into a capsule, so the material is used as a dilution. At 1%, a 200 µg dose is about 161 mg of blend for either source. The fill weight does not change when the ligand changes; the label and the identity tests do. That is why a source swap can pass a weight check and still be the wrong material. The blend is also where uniformity is won or lost. At 1%, the carrier is 99% of the powder, and a segregated blend gives some capsules more chromium than others even when the drum certificate is correct. The blend study, not the drum assay, is the evidence for the fill. ## When to choose which Choose the nicotinate when the label names chromium nicotinate, when the destination file covers that source, and when a grey-green 40 mesh powder suits a capsule, tablet or blend. Choose the picolinate when the label names it and the file is built around it. Both are poorly soluble in water, so neither is the easy route to a clear drink, and a solution format needs its own development work in both cases. The chromium figure cannot be the deciding line. The deciding lines are the ligand on the label, the permitted-source check for the destination and the identity method the buyer can verify. A switch between the two needs a written change control, a new specification and a label check. The catalog specification is on the chromium nicotinate hub; the other source is described on the chromium picolinate hub. The picolinate-versus-chloride question has its own comparison page, and a second picolinate salt is described on the zinc picolinate page. The analytical methods are indexed under methods, and the release workflow is on the quality page. ### 03 Chromium nicotinate stability: the dry powder and the blend URL: https://nutrition.rainwoodbio.com/products/minerals/chromium-nicotinate/stability/ Reviewed: 2026-11-19 Dry chromium nicotinate is a crystalline coordination complex with a 1.0% moisture ceiling, and a sealed foil pouch or fiber drum keeps the assay where it was released. The risk sits in the dilution and the finished matrix: at a 1% blend the carrier is 99% of the powder, and at a 200 µg chromium dose the complex is only about 1.6 mg, too small for a visual uniformity check. Moisture, heat and light are the variables to control, and the shelf life belongs to the pack and the matrix, not to the chemical name. In one lineThe dry complex keeps its assay in a sealed pack; the 1% blend and the finished matrix decide what the shelf life really is. ## The dry powder The specification allows ≤1.0% loss on drying, and that limit is a release gate, not a storage allowance. Once a pouch is opened the powder meets the room: moisture raises the loss on drying, particles cake and flow changes. The grey-green colour is the visible marker, and a duller or darker shade is a reason to retest and read the storage history rather than a result in itself. The pack is part of the specification. A 1 kg foil pouch is the barrier for a trial, and a 25 kg fiber drum relies on its inner liner for a production lot. A drum stored on a concrete floor in a humid room, or a pouch folded over rather than heat-sealed, is a moisture route that the certificate cannot show. ## The complex in solution The powder dissolves poorly at neutral pH, and solubility rises as the solution becomes more acidic, so a solution format is a development question rather than a mixing instruction. An acidic matrix can dissolve more of the powder, and the same acidity can change the complex; a bench solution that looks clear is not evidence of a stable finished drink. Heat adds a second variable. A pasteurised or hot-filled liquid is a different environment from a dry blend, and the finished product's pH, water activity and pack have to be tested together. A cloudy dispersion has its own failure mode: sediment at the bottom of the bottle after a few weeks, which a bench check on day one will not show. ## What drives the result Factors that move chromium nicotinate during storage | Factor | Effect | Control | Water | Higher loss on drying, caking, flow loss | Sealed pouch, dry weighing room, reseal | Heat | Colour shift, moisture migration | Cooler process, controlled drying | Light | Colour fade or darkening | Opaque or foil pack, dark store | pH in solution | Complex change, haze, sediment | Buffer and test the final matrix | Carrier in a dilution | Moisture and flow follow the carrier | Specify the carrier and its own moisture limit | Pack | Moisture vapour ingress | Foil pouch, drum liner, sealed seam These factors are not independent. A warm, bright, humid store is worse than the sum of three separate effects, and a 1% blend in an open tub combines all of them. The useful question is not whether the complex is stable, but in which pack, at which condition, for how long. ## A stability protocol for the ingredient Bracket the pack rather than the molecule. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% relative humidity cover the warehouse; 40 °C/75% relative humidity is a stress condition that makes a trend visible inside the study window. A light-exposure arm covers the failure mode that a dark incubator misses. At each pull test the chromium by titration, the complex assay by HPLC, identification by infrared, loss on drying, appearance, particle size and microbiology. Pull at the start and then at 3, 6, 12 and 24 months, and keep a retained sample from each pull with the lot code. A dilution needs its own study, not a line in the parent material's report. At 1% the carrier dominates, so test the blend for chromium uniformity, carrier moisture, flow and segregation. The 1 kg pouch and the 25 kg drum have different surface-to-volume ratios and different opening histories, and the data belongs to the pack that will be sold. ## The finished formula changes the test Dosage formats · where the risk sits | Format | Main risk | What to test | Dry capsule or tablet | Moisture and excipient interaction | Loss on drying, flow, chromium, appearance | Powder stick | Seal and moisture pickup | Loss on drying, uniformity, seal integrity | Drink mix | pH, dispersion, sediment | Assay, pH, appearance, hold time | Liquid | Complex change, preservative, colour | Assay, pH, appearance, microbiology A gummy or a chew is a wet, warm matrix and needs its own data; the dry powder's stability does not transfer to it. A stick pack depends on its seal, and a liquid depends on its pH and its preservative. The common mistake is to test the powder, pass the powder and ship the format. ## How the shelf life is assigned No single shelf life is published for the chemical name, because the pack and the matrix set it. The retest period for the pack you buy should come from the supplier's study, should name the storage condition and should be supported by results rather than a pass statement. A bulk pack that is re-tested before use can carry a retest period; a consumer pack needs a date the shopper can read. The certificate releases a lot; it does not predict a shelf life. If the blend or the matrix has not been studied, the defensible answer is a shorter period or a new study, not a figure borrowed from another chromium source. The storage statement on the label should match the condition the study used. The release tests that the study follows are on the COA page; the packs a study has to cover are described on the ordering page; the quality page explains how the data are held; the catalog specification sits on the chromium nicotinate hub; the moisture test is defined in the methods index. ### 04 Chromium nicotinate: MOQ, packs and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/chromium-nicotinate/moq/ Reviewed: 2026-11-19 The minimum order for chromium nicotinate is 1 kg, packed as a 1 kg foil pouch; the standard bulk pack is a 25 kg fiber drum, and the catalog lead time is 1–7 days. One kilogram at 12.4% chromium holds about 124 g of the element, or roughly 620,000 doses at 200 µg, so the minimum is not set by the number of doses. It is the smallest unit that carries a lot code, a certificate and enough material for a blend trial and a retained sample. In one lineOne kilogram is a qualification unit: at 12.4% chromium it holds about 620,000 doses, so the minimum is set by traceability, not by dose count. ## Why the minimum is 1 kg The arithmetic shows why the minimum is not a dose-count decision. One kilogram at 12.4% is 124 g of chromium, or 124,000 mg; at 200 µg per dose that is 620,000 doses. At 1% dilution, the same kilogram holds about 10 g of the complex and roughly 6,200 doses at 200 µg. Either way the quantity is far beyond a first trial. What the kilogram buys is a released lot with a lot code, a certificate, a retained sample and enough material to run an identity check, a blend trial and the first stability pull. Below 1 kg the material is normally split from a larger lot and repacked, which adds handling and loses the original pack identity without changing the chemistry. The 25 kg drum is the bulk unit. It reduces handling per kilogram, but it commits inventory and a longer storage period, so it is a production decision rather than a qualification one. ## Packs and what each one is for Standard chromium nicotinate packs | Pack | Net content | Typical use | What to confirm | Foil pouch | 1 kg | Qualification, small batches | Seal, lot code, COA | Fiber drum | 25 kg | Production | Inner liner, lot code, COA | Granulated grade | On request | Flow-sensitive lines | Granulation and particle size | Dilution | On request | Low-dose blending | Carrier, ratio, blend chromium assay The pack is the net weight of the article as sold. A dilution is its own article: the carrier and the blend assay belong on its certificate, not only the parent complex's. A granulated grade is likewise a different specification, not a packing choice, because the particle-size line changes with it. ## Lead time and dispatch The catalog lead time is 1–7 days from order confirmation. That window covers picking, document preparation and dispatch; it does not include transit, customs clearance or the customer's own quality release. A custom dilution, a granulated grade or a document set for a new market can add time, and the quotation should state it separately. Ask for the dispatch date as well as the lead time, and ask for the lot's release date and current retest period. A short lead time on a lot that is close to its retest date is not the same offer as a short lead time on a fresh lot. ## What a quotation needs Six details that change a chromium nicotinate quotation | Detail | Why it changes the offer | Ligand and CAS number | Nicotinate, picolinate or a polynicotinate blend | Assay and chromium figure | Two gates, each with its own method | Quantity and pack | 1 kg pouch, 25 kg drum or an agreed net weight | Destination and Incoterm | Port, clearance, documents and any label work | Document set | COA, SDS, specification, allergen and identity records | Market and intended use | Supplement or another use; the route check follows A quotation without the ligand is incomplete, because the same chromium figure can describe more than one source. The six lines above are also the minimum needed to write a purchase order so that the lot arrives as specified. ## The sample is a lot The 1 kg pouch is the qualification sample. Test the identity, the assay, the chromium figure, the loss on drying and the microbiology before scaling, and keep a retained sample from the same pack. The lot code on the sample, the certificate and the quotation should agree. If a bench trial needs less, say so before ordering. A subsample drawn from a released lot is defensible when it is documented and the remainder is retained; a sample that cannot be traced to a lot is a demonstration, not a qualification. Do not assume that a bench subsample and the production drum will come from the same lot. ## Terms to settle before the first order The quotation sets the commercial terms, and the quality terms belong beside them: the specification revision, the certificate per lot, the retained sample, the retest period and the change-control route. A quality agreement is worth having before the first production order, not after the first dispute. Returns and replacements follow those documents. A lot that fails the agreed specification should be handled through the retained sample and a joint re-test, with the referee laboratory named in advance, rather than through a photograph of the powder. The certificate lines that travel with the pack are described on the COA page; the storage questions are on the stability page; the permitted-source question is on the compliance page; the release workflow is on the quality page; the catalog specification sits on the chromium nicotinate hub. ### 05 The regulatory file for chromium nicotinate URL: https://nutrition.rainwoodbio.com/products/minerals/chromium-nicotinate/compliance/ Reviewed: 2026-11-19 Chromium nicotinate is a source of chromium, and the regulatory file is built around the exact source, the destination and the finished product. Four checks decide it: whether the source is on the permitted list for that market, whether the contaminants sit under the ceiling at the daily dose, whether the label names the source and declares chromium in the required form, and whether the statement on the pack is one that may be made. The buyer's regulatory team confirms the route; this page sets out the framework and the documents the file needs. In one lineThe permitted-source list, the contaminant ceiling, the label wording and the claim are four separate checks, and the buyer's regulatory team confirms each one for the destination. ## What the file contains The four questions are often conflated. A source named on a permitted list is not automatically a permitted claim, a finished-product contaminant ceiling is not a raw-material specification, and a sentence allowed in one market can be a disease claim in another. Each answer has its own instrument and its own evidence. The file therefore holds four kinds of paper: the article (specification, CAS number, certificate), the safety and handling data (SDS, contaminant results, microbiology), the market route (the permitted-source reference for the destination), and the label and claim review. A folder of undated PDFs is not a file; a version list with lot codes is. None of the four is signed off by the supplier alone. The supplier describes the material and keeps it under change control; the brand, or its regulatory adviser, decides whether the material may be sold as intended in that market. ## European Union In the EU, vitamin and mineral sources for food supplements are governed by Directive 2002/46/EC, and the permitted forms are listed in Annex II as amended. The list is source-specific: an entry describes a particular compound, so the check is whether the exact source is named, not whether the word “chromium” appears. The buyer's regulatory team makes that check against the current consolidated text for the destination. Labelling follows Directive 2002/46/EC and Regulation (EU) No 1169/2011. Chromium is declared in µg and as a percentage of the reference intake, 40 µg/day; the pack states the recommended daily portion, the warning not to exceed it, the varied-diet statement and the keep-out-of-reach warning. Health claims fall under Regulation (EC) No 1924/2006 and the authorised list in Regulation (EU) No 432/2012, and only the authorised wording with its conditions may be used. Contaminants are governed by Regulation (EU) 2023/915, which sets maximum levels for food supplements; member states can add their own limits, so the destination matters. The current text, not this summary, decides the ceiling. ## United States In the US the dietary-supplement route applies: the brand is responsible for the ingredient's basis and for the finished product, and manufacturing follows the cGMP in 21 CFR 111. On the Supplement Facts panel chromium is declared as the element, with a Daily Value of 35 µg for adults and children four and older under 21 CFR 101.9; the ingredient list names the source. A structure/function statement is written and substantiated by the brand, carries the DSHEA disclaimer and is notified to FDA within 30 days of marketing. A disease claim is outside the framework. Federal law sets no general heavy-metal ceiling for supplements, so state rules such as Proposition 65 and voluntary standards often decide what the brand tests. ## Contaminants and limits Contaminant limits · catalog specification and EU supplement ceilings | Contaminant | Catalog limit | EU supplement ceiling | What the file shows | Lead | ≤3 mg/kg | 3.0 mg/kg | Lot result and the finished-product calculation | Cadmium | ≤1 mg/kg | 1.0 mg/kg | Lot result and any category exception | Mercury | ≤0.1 mg/kg | 0.10 mg/kg | Lot result and method | Arsenic | ≤2 mg/kg | No harmonised limit | The agreed limit and the method The catalog column is a raw-material specification; the EU column is written for the supplement as sold. They are not interchangeable, and the daily dose in the finished product is what converts one into the other. The arsenic line is the clearest case: the 2 mg/kg catalog limit is a customer specification because there is no general EU maximum for arsenic in food supplements. ## Label and claims No statement on a chromium nicotinate pack may describe a disease or claim to prevent one. In the EU, a health claim must be on the authorised list and must match its conditions; in the US, a structure/function statement has to be truthful, substantiated and disclaimed. An identity statement — that the lot is chromium nicotinate — is not a health claim, but it still has to be true on the certificate. The ingredient name should not be used to go beyond the authorised wording, and a certification mark does not replace the substantiation behind the label sentence. The label is reviewed separately from the certificate, and a claim does not change the specification. ## The document pack Documents a brand should hold for a chromium nicotinate lot | Document | What it proves | Who issues it | Specification | The agreed article and limits | Buyer and supplier | Lot COA | The results for this lot | Manufacturer | SDS | Handling and hazard information | Manufacturer | Identity records | Infrared and HPLC results | Manufacturer or laboratory | Contaminant results | Heavy metals and microbiology | Manufacturer or laboratory | Allergen and GMO statements | Whether a declarable substance is present | Manufacturer | Packaging declaration | Food-contact suitability of the pack | Pack supplier | Label artwork | Source name and chromium amount | Brand Every document should carry the lot code or point to it. A generic technical data sheet and a lot-specific certificate are not a matched pair unless the article, the grade and the pack agree. ## Checklist before the first order Market file checklist · chromium nicotinate | Check | Evidence | Red flag | Source on the list | The exact source is named in the destination list | “Chromium” with no source | Contaminants | COA results against the ceiling at the daily dose | A raw-material limit pasted onto the finished product | Label source | The ingredient list names chromium nicotinate | A generic chromium line | Chromium amount | µg and percentage of the reference intake | A powder weight presented as chromium | Claims | Authorised wording or a disclaimed structure/function statement | A disease claim | Documents | Lot code on the certificate, SDS, specification and label | Generic documents with no lot link | Change control | A new label and specification for a new source | A purchase-order switch with no label change The chromium nicotinate hub carries the catalog specification; the COA page shows where each result sits; the identity page covers the form tests; the quality page describes the release file; the methods index describes the analytical basis. ### 06 How to prove a lot is chromium nicotinate URL: https://nutrition.rainwoodbio.com/products/minerals/chromium-nicotinate/identity/ Reviewed: 2026-11-19 A chromium nicotinate lot is the nicotinate complex when four lines agree: the chromium result sits in the 12.0–12.8% window, infrared shows the nicotinate ligand, HPLC gives the complex and the ligand on the same lot, and the powder is the trivalent grey-green complex rather than another chromium salt or a dyed dilution. The chromium figure alone cannot do it, because the picolinate complex has the same formula and almost the same chromium content; the ligand is the line that names the material. In one lineChromium proves the metal, infrared proves the ligand, and the chromium-to-nicotinate ratio proves the complex; no single line does all three. ## The four identity layers A certificate can name the right article and still fail to prove the powder. The four layers below are separate questions, and each needs its own evidence. A supplier who answers only the first has described the paperwork, not the material. Four layers of chromium nicotinate identity | Layer | Question | Evidence | Article | Is the material named? | Specification, CAS 64452-96-6, lot certificate | Metal | How much chromium is present? | Complexometric titration, 12.0–12.8% | Ligand | Is the ligand the nicotinate? | Infrared spectrum, HPLC nicotinic acid | Ratio and disclosure | Is it the complex, and is anything else present? | Chromium-to-ligand ratio, carrier and dilution statement A chromium result can pass while the ligand is wrong; an infrared match can pass while the lot is diluted. A dilution can still be a legitimate article, but only when the carrier and the ratio are declared. ## The chromium-to-ligand ratio The complex has three nicotinate ligands for each chromium atom. On a mass basis, chromium is 12.43% and the three ligands are about 87.6%, a chromium-to-ligand mass ratio of about 1 : 7.0. That arithmetic is the second identity check: a lot with a normal chromium figure and too little measured ligand points to a blend with another chromium source, and a lot with too much ligand points to unreacted nicotinic acid or a dilution. The catalog reports identification by infrared and HPLC rather than a numeric ligand assay. That is enough to confirm identity; it is not enough to compute a ratio. If the ratio matters for a dispute, ask for the HPLC basis — free nicotinic acid or total nicotinic acid after the complex is released — and make sure the chromium and the ligand results belong to the same lot. The ratio is also a useful cross-check on a supplier's claim that a material is “niacin-bound”. A chromium figure with no ligand result says nothing about the binding, and a niacin figure with no chromium result says nothing about the complex. ## Why XRD is not the identity test X-ray diffraction answers a different question. It can show that the powder is crystalline, compare the pattern with a reference and detect a crystalline second phase. It cannot name the ligand: a crystalline chromium salt, a nicotinate and a picolinate can each give a pattern, and the pattern depends on the solid form as much as on the chemistry. Use XRD as a crystallinity or polymorph check, not as the proof of nicotinate. A “XRD conforms” line without the reference pattern and the detection limit adds little. The direct evidence is the infrared spectrum plus the HPLC result, with the chromium figure as the third leg. ## What adulteration looks like Substitution routes and the signals that catch them | Route | What it does | Signal and test | Chromium chloride or another chromium salt | Chromium passes; colour may be pale | Titration, infrared, HPLC, chloride check | Dilution with a carrier | Chromium low; more powder per dose | Chromium figure, loss on drying, carrier declaration | Dye to match the grey-green | Colour looks right; ligand absent | Infrared, HPLC, dye screen | Unreacted nicotinic acid | Ligand high; chromium low | Chromium-to-ligand ratio, HPLC basis | Blend with a second chromium source | Chromium on target; ligand low | Ratio, infrared, HPLC | Picolinate sold as nicotinate | Similar chromium figure; different ligand | Infrared, HPLC, CAS on the certificate The last route is the one a chromium figure cannot catch, and it is why the ligand line belongs in every specification for this material. Colour is a weak signal in both directions: a pale salt can be tinted, and a declared dilution can look faintly grey-green while still being legitimate. ## What to write into the specification - “Chromium nicotinate, chromium(III) nicotinate, CAS 64452-96-6, C18H12CrN3O6.” - “Chromium 12.0–12.8% by complexometric titration; assay 98.0–102.0% by HPLC, with the basis stated.” - “Identification by infrared and HPLC on the lot; report the spectrum and the chromatogram.” - “Loss on drying ≤1.0%; particle size ≥95% through 40 mesh.” - “No chromium source other than chromium nicotinate; no added colour.” - “If diluted: the carrier, the ratio and the chromium assay of the blend.” The clause that is often missing is the one about a second chromium source. A specification that names the complex but accepts “chromium” from any source can be met by a blend, and the certificate would still be truthful about the element. ## Five questions for the supplier - Which ligand is this lot, and which CAS number is on the certificate? - Can you provide the infrared spectrum and the HPLC chromatogram for this lot? - What is the chromium result, by which method, and does it agree with the 12.43% theoretical figure? - Is the lot the complex, or a blend with a carrier or a second chromium source? - If the lot is disputed, will you accept a joint re-test on the retained sample? Five direct answers, all tied to one lot code, amount to an identity file. A chromium percentage on its own does not. The product hub carries the catalog specification; the COA page shows where each figure sits on the certificate; the grades page compares the sources; the methods index covers the analytical basis; the quality page describes the release workflow. ### 01 What the COA for lithium orotate actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/lithium-orotate/coa/ Reviewed: 2026-11-19 A lithium orotate certificate has to hold two measurements together: the HPLC assay of the salt and the elemental lithium figure. The catalog releases a lot at 98.0–102.0% assay with lithium at 4.0–4.5%, against a theoretical 4.28% for the anhydrous salt. A certificate that reports only the assay has measured the organic part and left the counter-ion untested. In one lineTwo numbers carry the certificate: the HPLC assay says how much orotate salt is present, and the titrated lithium figure says that the salt is lithium orotate. ## The certificate as a test report A useful certificate can be audited line by line: each parameter says what was measured, how it was measured, and the limit the lot had to meet. A line that reads only “conforms” leaves the reader with the laboratory's opinion and no way to check it. For this salt the assay and the lithium values decide, together, whether the material is the right salt at all. Release panel for lithium orotate: identity, both assay figures and the limits | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | IR, plus HPLC against a reference | Conforms to the reference | Assay, lithium orotate | HPLC | 98.0–102.0% | Lithium | Titration | 4.0–4.5% | Loss on drying | Gravimetric | ≤1.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count, yeast and mould, absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh The lithium line belongs to this material alone. Orotic acid carries none of it, and lithium carbonate carries a great deal more, so the elemental figure is what separates the salt from its neighbours. Read it beside the assay, never in place of it. ## The lithium figure, the assay basis and the arithmetic The anhydrous salt is C5H3LiN2O4 with a molar mass of about 162.03 g/mol. Lithium accounts for 6.94 of those grams, which is 4.28% by mass, and the orotate part for the remaining 95.7%. That calculation anchors both assay rows: a 100% pure salt cannot report more than 4.28% lithium, and it cannot report less than about 4.24% while the loss on drying is inside 1.0%. The two rows are on different bases unless the certificate says so. Assay is usually reported on the anhydrous basis, and the lithium figure is usually reported as received. On a lot with 0.8% loss on drying, 4.283% theoretical becomes 4.249% as received: a small shift, but it is the difference between a result that looks low and one that does not. The basis belongs in the row, not in a footnote. The same arithmetic sets a floor. To pull the lithium figure down to 4.00% by water alone, the powder would have to hold about 6.6% moisture, which fails the 1.0% loss-on-drying limit by a wide margin. A credible lithium result at the bottom of the window, on a lot whose moisture passes, is therefore a question about the salt rather than about the drying. Ask for the titration volume, the sample weight and the method. ## Release limit versus batch result The limit is the gate the lot had to pass; the result is the number the bench actually produced. When the second column simply repeats the first, nothing has been reported. Reading a result beside its limit | Parameter | Limit | Result, as it should read | Assay | 98.0–102.0%, basis stated | The measured figure plus the basis it was calculated on | Lithium | 4.0–4.5% | The measured figure, as received, and the method | Loss on drying | ≤1.0% | The measured figure | Heavy metals | Per element | One figure per element, in mg/kg | Microbiology | Counts and absence | The count and the absence wording, by lot A pass statement is a conclusion, and the reader should be able to rebuild it from the figures above. A heavy-metal total hides the element that matters, so each one needs its own line. Microbiology needs a count and an absence statement, both tied to the lot code. ## What moves between batches Crystallisation and drying are what move the lithium figure and the moisture, and they move them together. A batch dried harder loses water and reads a little higher on lithium as received; a batch dried less reads lower and shows the extra water on the loss-on-drying line. That is why the two figures have to be read as a pair. A lithium result that moves while the moisture does not is a change in the salt or in the assay, not in the drying. The mill and the sieve decide the mesh, and they decide little else. Mesh is a finishing step: a new mill or a new screen moves the number while the molecule stays exactly the same. Colour is the least quantitative line and the most revealing: white to off-white is a wide window, and a batch that turns grey or yellow while the assay still passes points to a different drying step, a hold or a metal contact. Read the series, not the single lot: lithium sliding towards the floor of the window, moisture creeping up, or an extra peak that was not there before all say more than one result next to an edge. Trace the code through as well; it must agree on the certificate, the pouch or drum, and the retained sample. ## When an outside laboratory earns its fee An independent test earns its fee at a new source, at a first shipment into a market where the route is still open, where a salt claim rests only on the supplier's own certificate, or where a result is contested. The panel is not a copy of the certificate: HPLC and IR for identity, lithium by a second technique such as ICP-OES, moisture, ICP-MS and microbiology. Add X-ray diffraction if the question is whether the powder is one crystalline salt or a blend, and add a pH and effervescence check if a carbonate is suspected. Ask the laboratory to report its detection limit for each screen, because a “not detected” line without a limit says something about the method, not about the sample. Keep the chain tight: the powder that was tested should be the powder that was retained, and the report should carry the lot number. ## What to compare between suppliers Put six lines side by side: the exact salt and CAS number; assay with its basis; lithium with its basis and method; loss on drying; the heavy-metal and microbiology panels; the pack, code and retest period. If two offers agree on the assay and disagree on the lithium figure or on the basis, they are offers for two different powders. The catalog limits sit on the lithium orotate product page. The tests that separate the salt from a blend are on the identity page; the salt comparison behind the label is on the orotate versus carbonate page; the procedures are collected in the methods library; the release workflow is on the quality page. The same certificate logic applies to the magnesium salt of the same acid, where the element and the hydrate carry the risk instead. ### 02 Choosing a lithium orotate grade: particle, granulation, dilution URL: https://nutrition.rainwoodbio.com/products/minerals/lithium-orotate/grades/ Reviewed: 2026-11-19 Lithium orotate is supplied as one salt, so the grade question is narrower than it is for a mineral with several chemical forms. What a buyer can actually vary is the particle: the standard 40 mesh powder, a granulated version on request, and a diluted blend on request. Each changes the flow, the dust, the fill weight and one or two certificate lines, not the identity of the salt. The larger decision — whether to use the orotate at all rather than the carbonate — is a separate question, and it is treated on its own page. In one lineOne salt, three presentations: the mesh, the granulation and any dilution change the flow and the fill weight, not the identity of the salt. ## Why the grade range is narrow The catalog describes a single chemical item: lithium orotate, CAS 5266-20-6, assay 98.0–102.0%, lithium 4.0–4.5%, loss on drying ≤1.0%, at least 95% through 40 mesh. There is no second salt form, no coated grade and no sustained-release version in the range. A purchase order that asks for “a different grade” is therefore usually asking for one of three practical things: a coarser or finer powder, a granulated powder that flows, or a lower assay per gram so the material can be weighed into a small-dose formula. The lithium window also fixes the hydrate question. One mole of water would add about 18 g/mol and pull the lithium figure to roughly 3.9%, below the catalog floor, so 4.0–4.5% is an anhydrous window by construction. If a supplier offers a hydrated material, it is a different specification item with a different lithium figure, and the pack and the label have to say which one was bought. That is a change of material, not a grade. ## The three presentations side by side Lithium orotate presentations and what each one moves | Presentation | What changes | Usual fit | Certificate line to add | Standard powder, 40 mesh | Nothing; this is the catalog grade | Capsules, tablets, dry blends | ≥95% through 40 mesh | Granulated, on request | Flow, dust, bulk density, wetting | High-speed tableting, stick packs | Granulation method and bulk density | Diluted blend, on request | Assay per gram, carrier, label | Very small doses, premix handling | Carrier identity, assay, mesh, allergen statement A granulated lot and a milled lot are not interchangeable on a tablet press even when both pass the same assay. The press runs on the flow and the die fill, which are properties of the particle, not of the molecule. A dilution is a bigger change: it puts a second material into the powder, so the ingredient list, the allergen review and the assay arithmetic all move with it. ## Flow, dust and a slightly soluble powder The powder is white to off-white and only slightly soluble in water, so a dispersion in a liquid is a suspension and will settle. Inside a capsule or tablet nothing settles; in a stick pack the sediment is on show unless the powder is milled fine and the formula holds it in suspension. Finer milling helps the suspension and makes the dust worse, which is why the mesh line and the handling instructions belong together. The catalog does not fix a bulk density. Two lots at the same mesh can fill a capsule die differently, so ask for the lot figure before the fill weight is frozen. Flow is the second physical line worth asking for on a granulated grade: the point of granulation is a repeatable die fill, and a granulation that still bridges in the hopper has not solved the problem it was bought for. Moisture is the third. The ceiling is 1.0% loss on drying, which is tight for a powder handled in a humid room. The powder is not offered as a moisture-protected grade, and a 1.0% gate leaves little room for pickup after the pouch is opened; a damp powder also flows badly before it fails anything else. ## From the claim to the fill weight One line of the label carries the salt; the panel carries the element. They are two masses, and neither can be filled in from the other. Lithium orotate at 4.28% lithium means a 500 mg capsule carries about 21.4 mg of the element; a 250 mg capsule carries about 10.7 mg, and a 5 mg lithium claim needs about 117 mg of powder. The figure is arithmetic from the formula, not a suggested intake. Those masses decide the format. At 4.28% the salt is dilute in lithium terms, so a capsule can carry a meaningful quantity of powder without a large elemental dose, which is the opposite of the carbonate at 18.8%. A formulator who writes the elemental target first and then divides by the salt factor will get the fill weight right; one who starts from “500 mg of powder” will write a different label. Either way the certificate, the specification and the label should use the same salt name, the same basis and the same factor. For a diluted blend the arithmetic changes twice: once for the assay of the blend and once for the carrier. A 10% blend carries about 0.43% lithium, so the fill weight moves by an order of magnitude, and the carrier has to be declared. That is a formulation decision rather than a purchasing convenience, and it should be written into the specification before the first order. ## What to write into the specification - “Lithium orotate, CAS 5266-20-6, C5H3LiN2O4, anhydrous.” - “Assay 98.0–102.0% by HPLC, basis stated on the certificate.” - “Lithium 4.0–4.5% by titration, as received.” - “Loss on drying ≤1.0%; identity by IR and HPLC.” - “Particle size ≥95% through 40 mesh; bulk density reported per lot.” - “Granulation or dilution only by written agreement, with the carrier named.” We supply the standard 40 mesh powder. A granulated or diluted presentation is a quotation item, not a substitution, because it carries its own specification, its own certificate lines and, for a blend, its own label. The catalog figures are on the lithium orotate product page; the salt choice and its label consequence are on the orotate versus carbonate page; the certificate lines are on the COA page; the sieve and particle procedures are in the methods library; lot release is described on the quality page. The magnesium orotate page shows how the same acid behaves when the element and the hydrate carry the fill weight instead. ### 02.1 Lithium orotate vs lithium carbonate: salt, lithium, route URL: https://nutrition.rainwoodbio.com/products/minerals/lithium-orotate/grades/lithium-orotate-vs-carbonate/ Reviewed: 2026-11-19 Lithium orotate carries 4.28% lithium and lithium carbonate 18.78%, so the same lithium figure on a label needs about 4.4 times the orotate mass. That difference drives the fill weight, the capsule count and the label; it does not, on its own, change whether the material may be sold as a food or supplement ingredient in a given market. The salt choice and the route are two separate decisions, and this page keeps them apart. In one lineOrotate carries 4.3% lithium and carbonate 18.8%, so the same claim needs about 4.4 times the orotate mass; the salt changes the mass and the label, not the route question. ## Two salts, two identities Both materials deliver the same element, which is where the similarity ends. Lithium orotate is the lithium salt of orotic acid, a pyrimidine carboxylic acid with one acidic proton, in a 1:1 ratio. Lithium carbonate is the lithium salt of carbonic acid, two lithium ions to one carbonate, and it is a much smaller molecule with a much higher lithium fraction. Lithium orotate against lithium carbonate | Property | Lithium orotate | Lithium carbonate | CAS number | 5266-20-6 | 554-13-2 | Formula | C5H3LiN2O4 | Li2CO3 | Molar mass | About 162.03 g/mol | About 73.89 g/mol | Lithium content | 4.28% by mass | 18.78% by mass | Appearance | White to off-white powder | White powder | Water solubility | Slightly soluble; a dispersion is a suspension | Dissolves with an alkaline reaction | Behaviour with acid | No gas | Effervesces, releasing carbon dioxide | Label name | Lithium orotate | Lithium carbonate A carbonate is an alkaline solid that reacts with acid, which suits an effervescent system and complicates an acidic one; the orotate barely dissolves, which suits a capsule and complicates a drink. ## The lithium figure, dose by dose Start from the element and divide by the fraction. At 4.28%, a 5 mg lithium claim needs about 117 mg of lithium orotate; at 18.78%, the same claim needs about 27 mg of lithium carbonate. A 100 mg scoop of the orotate carries about 4.3 mg of lithium, and a 100 mg scoop of the carbonate about 18.8 mg. The 4.4 times factor is the ratio of the two fractions, so it holds at every dose. That factor moves the whole formula. A 500 mg capsule of orotate delivers about 21.4 mg lithium; the same capsule filled with carbonate would deliver about 94 mg, which is a different product with a different label. Going the other way, a formula built on 27 mg of carbonate does not become a 27 mg orotate formula by swapping the name: it becomes a 117 mg orotate formula, and the capsule, the blend and the label all change with it. The assay basis is a second conversion that is easy to miss. A 99.0% assay is the purity of the salt, and the lithium figure follows from it: 0.99 × 4.28% is about 4.24% for the orotate, and 0.99 × 18.78% about 18.6% for the carbonate. Neither number is a recommended intake; both are the arithmetic that keeps the label and the weigh-up in agreement. ## Handling, solubility and the finished form The orotate is only slightly soluble, so a stick pack, a drink or a liquid suspension has to be designed as a suspension: a milled grade, a suspending system and a redispersion step. A capsule or tablet avoids the problem: the powder is swallowed with water, and the low solubility does not matter to the fill. Granulation, where it is used, is a flow decision rather than a solubility one. The carbonate behaves differently in water: it dissolves with an alkaline reaction and releases carbon dioxide when acidified. That is the basis of effervescent tablets, and it is also why a carbonate can disturb an acidic blend, a flavoured drink or a pH-sensitive colour. A formulator who switches salts without rechecking the pH, the taste and the effervescence has changed the product, not just the ingredient. The orotate is the larger molecule and the more dilute one. In a tablet that needs a sensible weight, that dilution can be an advantage; in a capsule with a fixed size, it sets the ceiling on the lithium figure per capsule. The format decides which arithmetic is workable. ## What the label has to say The ingredient list names the salt, and the declaration gives the quantity in the form the destination requires. Those are two statements about two different masses, and they cannot both be filled in from the same number. A panel that says “lithium” without naming the salt leaves the buyer unable to check the arithmetic; a panel that names the salt without a quantity leaves the reviewer unable to check the dose. The label must match the drum. A formula written for the carbonate and filled with the orotate is mislabelled even when the powder is genuine and the certificate is clean, because the declared ingredient and the weighed ingredient no longer agree. Either direction is a change control: new specification, new fill weight, new artwork, written approval. Wording is a separate review. This page makes no disease-related claim and is not a label; the permitted wording, the permitted population and any maximum quantity are decided by the destination's rules, not by the salt. ## The route question follows the lithium In several markets, as of this review, a lithium salt is the active substance of a prescription medicine, and where that is the case a supplement presentation is reviewed against the rules for medicinal substances as well as the rules for foods. That review follows the element and the presentation: the quantity per serving, the claims, the format and the pack. The counter-ion does not settle it. Moving from the carbonate to the orotate changes the mass and the label; it does not convert the substance into an ordinary nutrient, and it does not make a route available that was not available before. We do not state a regulatory status for either salt in any market. The buyer's regulatory team confirms the route for the destination, in writing, before the salt is fixed; if the confirmed route covers only one presentation, the salt choice cannot rescue it. The route question is worked through on the compliance page, and it should be read before the formulation is frozen. ## When each salt is the question Choose the orotate when the formula needs a larger, more dilute powder mass, when the capsule or tablet format can carry the fill, and when the label is to name lithium orotate. Choose the carbonate when the formula is built around a small, dense, alkaline solid, or when an effervescent system needs it. Neither choice removes the route question, and neither one is a drop-in for the other. The catalog figures are on the lithium orotate product page; the wider grade picture is on the grades page; the tests that separate the salts are on the identity page; the procedures are in the methods library; release is described on the quality page. We supply the orotate, and the comparison above is a specification argument rather than an offer of both. ### 03 Lithium orotate: moisture, the sealed pack and the shelf life URL: https://nutrition.rainwoodbio.com/products/minerals/lithium-orotate/stability/ Reviewed: 2026-11-19 The dry salt keeps well in a sealed, opaque pack, and the catalog sets a tight moisture gate at 1.0% loss on drying. The failure modes are moisture picked up after the pack is opened, heat that accelerates it, and the small fraction that dissolves when the powder meets water. Shelf life is a property of the pack, and it comes from data on that pack. In one lineA slightly soluble salt with a 1.0% moisture ceiling: the pack and the storage condition, not the molecule, decide whether a lot still meets it after a year. ## The powder: moisture first, then heat and light The 1.0% loss-on-drying limit is a gate at release, not an allowance for storage. Once the foil pouch is open, the powder can take up water from the room, the loss on drying climbs, and the assay expressed as received falls with it. At 4.28% lithium there is very little headroom: the element is a small part of a large molecule, so a moisture gain that looks trivial on the certificate is a visible shift on the lithium line. Heat is the second variable. Ambient warehouse temperatures suit a sealed pack; a hot loading bay, a vehicle in the sun or a room next to a dryer does not. Bring a cold pack up to room temperature before opening it, or condensation will form on the powder and undo the moisture gate in one morning. Light is a precaution rather than a known failure mode. The orotate ring absorbs in the ultraviolet, so the powder is kept in an opaque or foil pack and any solution in an amber container. That is cheap insurance, and it costs nothing to specify on the pack. ## The solution: dilute, and rarely a true solution Lithium orotate is only slightly soluble in water, so a liquid formula is usually a suspension rather than a solution. That changes the stability question. A suspension fails by settling, caking and uneven dose before it fails on assay, and the powder sitting at the bottom of a bottle is exposed to the liquid for the whole shelf life. A suspension needs a validated redispersion step and a hold time, not only a preservative. Where a true solution is made, it is dilute, and the variables are pH, dissolved oxygen, light and microbial load. A dilute aqueous solution with no preservative is a growth medium; a preserved one has its own shelf-life question. If the formula can be a dry stick that the consumer dissolves at the point of use, the solution problem disappears and only the powder rules apply. The contrast with a freely soluble salt is worth keeping in mind. A salt such as sodium molybdate dissolves to a clear concentrate and can be handled as a stock solution; the orotate cannot, and a process written for one will not transfer to the other. ## What drives change during storage Factors that move lithium orotate during storage | Factor | What it does | Control | Moisture | Raises loss on drying; lowers the as-received assay and lithium figure | Sealed pouch, liner closed, dry store | Heat | Accelerates moisture movement and colour change | Controlled store, cool process | Light | Precaution for the orotate ring, in powder and in solution | Opaque or foil pack; amber glass | Oxygen | Solution and wet-surface oxidation | Low headspace, sealed pack, deaerated liquid | pH | Moves the salt and the slurry behaviour | Record slurry pH; validate the matrix | Microbial load | Grows in a dilute aqueous solution | Preservative system or dry format These factors are not independent. A warm, humid store does more damage than either condition alone, and a suspension in clear packaging combines moisture, light and microbial risk in one container. The question worth asking is not whether the salt is stable, but stable in what, at which condition, for how long. ## Designing a stability study for the powder A study is only useful if it names the pack, the condition, the time points and the tests. 25 °C at 60% relative humidity stands for the warehouse, 30 °C at 65% for a warm one, and 40 °C at 75% pushes the pack harder than any store should. A light-exposure arm covers the failure mode a dark incubator cannot see. At each point measure assay by HPLC, lithium by titration, loss on drying, appearance and IR identity, with microbiology; run the heavy-metal panel at the start and the end. Add a slurry pH reading if the material will be wet-processed; it is a cheap fingerprint and it moves when residual acid or a carbonate contaminant is present. Give the numbers rather than a verdict, and print the pack and the lot family on every page. Ask for the summary for the pack you will buy. A 1 kg pouch and a 25 kg drum differ in headspace, surface-to-volume ratio and opening history, so the data belongs to the pack and does not travel between them. ## The formula decides the rest Water activity is low inside a capsule or tablet, yet the shell and the excipients can still hand moisture to the fill. Read moisture at release and once more after storage, and look at the fill as well. A tablet compressed from a slightly soluble powder may also show a harder, slower-wetting surface as it ages, which is a physical change before it is a chemical one. On a stick pack the foil and the seal are the barrier, and a pinhole is a failure; inspect the strip, not just the powder. A liquid suspension depends on the suspending system and the preservative, and the powder's own stability is only the starting point. If the formula includes an acidic component, a carbonate contaminant would show as gas; the same test that screens for it at goods-in doubles as a process check. ## How the retest period is decided There is no single shelf-life number published here, because the pack and the store decide it. The retest period belongs on the specification, backed by a study on that pack and that condition. A number with no pack, no condition and no test panel describes nothing you can rely on. After the retest period, re-assay the retained sample before extending use, and do not carry a drum result across to a pouch that was repacked. The product page lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the methods library describes the procedures; the quality page describes the release workflow. ### 04 Lithium orotate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/lithium-orotate/moq/ Reviewed: 2026-11-19 A kilogram is the minimum, packed in foil; a 25 kg fiber drum is the production unit; 1–7 days is the standard lead time. Before the quantity, though, comes the destination: a quotation that fixes the pack without fixing the route is only half a quotation, because the same kilogram can be a supplement ingredient in one market and a different kind of purchase in another. In one lineA lot needs a pack that can be sampled, tested and traced, and this material needs the destination settled before the quantity. ## Where the one-kilogram floor comes from A kilogram is enough for a bench trial, a retained sample and a third-party identity test, and the pack keeps one lot code from fill to delivery. At 4.28% lithium the pouch holds about 42.8 g of the element, so a trial can be built on the actual lot rather than on a calculation. The 25 kg drum holds about 1.07 kg of lithium and is the production unit. It cuts handling per kilogram but ties up inventory and a longer storage period, and it needs a dry store and a liner that closes properly. Anything smaller is normally split out of a bigger lot and repacked, which costs handling, breaks the link to the original pack and weakens traceability while leaving the chemistry untouched. The floor comes from the pack and the lot record, not from a volume target. ## Packs we quote Lithium orotate packs and what each is for | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, qualification sample, small batch | Foil barrier against moisture and light; reseal once opened | Fiber drum | 25 kg | Production scale | Liner inside; code on drum and liner | Granulated powder | On request | Tableting, flow | Mesh, density and flow figures change | Diluted blend | On request | Very small doses, premix | Carrier named; label follows The catalog form is a 40 mesh powder, at least 95% through the sieve. Granulation or dilution is a different specification with its own certificate lines, not a packing choice, and it belongs on its own quotation line. If the tablet press or the stick pack needs a coarser or freer-flowing powder, say so before the quotation is built. ## Lead time, dispatch and freight The clock starts at order confirmation, and a standard pack is quoted at 1–7 days. Picking, paperwork and dispatch are inside that window. Transit, customs and the customer's own release are not. A granulation, a dilution or a non-standard pack adds time, and that belongs on a separate line rather than folded into the standard figure. Ask when it ships, not only how long the lead time is. One pack rides a pallet and the other rides as a parcel, so the Incoterm has to say who books the freight and who clears entry. Documents should travel with the lot rather than after it: a certificate that lands a week behind the drum stalls the goods-in test. ## What a usable quotation contains A quotation can be compared only when six things are on it: - The salt, written out. Lithium orotate, CAS 5266-20-6, and the word anhydrous. - The specification. Lithium figure and method, assay and its basis, moisture, mesh, heavy metals, microbiology. - Pack and quantity. Which pack: pouch, drum, or a granulated or diluted version priced separately. - Where it lands, and on which terms. Country, port or address, and the Incoterm. - Documents. Certificate, specification, safety data sheet, plus anything the importer's reviewers ask for. - Intended use and route. Supplement, food or another use, and the route the buyer's team has confirmed for that destination. The last item is the one that is easy to leave out and expensive to discover later. This material is described in more than one way across markets, and a supplier cannot confirm a route on the buyer's behalf. Commercial terms are not published here; they are set out on the quotation, pack and destination included. ## A sample is a lot, not a demo The kilogram pouch is the pack you qualify with. Before scaling, run identity, both assay figures and moisture, and keep back a sample from that same pack. One code has to travel with the powder — on the pouch label, the certificate and the quotation. A sample with no lot behind it is a demo, and a demo does not qualify anything. A bench trial that needs less than a kilogram should be raised before the order, not after. A split is a repack with its own paper trail, and it has to be recorded that way. Never assume the bench sample and the production drum share a lot, and never test one as though it were the other. ## What to fix before the first order A quotation carries the Incoterm, the pack, the lead time, the document list and the commercial terms. Quality sits beside commerce: which revision of the specification applies, a certificate for each lot, the retained sample, the retest period, and who approves a change. For a material whose market status has to be confirmed, the buyer's written confirmation of the route belongs in the file before the first production order, not after it. If something goes wrong, the quotation and the quality agreement decide what happens, not an email. When a lot misses the agreed specification, the retained sample and a joint re-test settle it; a photograph of the powder does not. Fix in advance who pays for the referee work and which laboratory both parties accept. The product page carries the catalog specification; the COA page lists the release tests; the compliance page sets out the route question; the MOQ glossary entry defines the term; the logistics page covers shipping and documents; release is described on the quality page. ### 05 The regulatory route question for lithium orotate URL: https://nutrition.rainwoodbio.com/products/minerals/lithium-orotate/compliance/ Reviewed: 2026-11-19 Lithium orotate is bought against a specification, but the specification does not answer the question a regulatory reviewer will ask first: may this material be sold as a food or supplement ingredient in the destination market, or does it fall under a different set of rules? Lithium is regulated differently from an ordinary mineral in many markets, and the answer depends on the market, the finished product and the presentation. This page sets out the documents and checks the file needs; it does not state a status for any market. In one lineThe specification describes the salt; whether lithium may be sold as a food or supplement ingredient is a question about the destination and the presentation, and the buyer's regulatory team answers it. ## Four questions, and the route is one of them A complete file answers four questions in order. What exactly is being bought, and against which revision of the specification? Which lot is in the drum, and what did its certificate measure? Which route applies to the finished product in the destination? And which parts must be re-qualified when the source, the process or the pack shifts? The lot is covered by the certificate, the specification by the technical data sheet, handling by the safety data sheet. None of the three covers the route. For most mineral salts the route question is settled by the permitted-ingredient list of the destination. For lithium it is not that simple, because the same element appears in more than one regulatory category across markets. The file should record the route the buyer's team has confirmed, in writing, with the date and the version it relied on. A route that lives only in an email chain is not a document. ## European Union and the United Kingdom The EU file starts with Regulation (EC) No 178/2002 on general food law, Directive 2002/46/EC on food supplements and Regulation (EU) No 1169/2011 on food information, and adds any product-specific route. The reviewer checks whether the mineral appears in the permitted list for the destination, whether an authorisation under Regulation (EU) 2015/2283 is engaged, and whether the member state regards the presentation as a medicinal product. Those are three separate questions, and a positive answer to one does not settle the others. The contaminant results are read against Regulation (EU) 2023/915 as it stands, and the label against the food-information rules. Great Britain is checked separately from Northern Ireland: the GB file uses the current GB rules and lists, and Northern Ireland follows the EU framework. A file built for one of the two is not automatically valid for the other, and the order documents should say which one was reviewed. ## United States The US file is built around the dietary-supplement framework: the ingredient, its intended use, the manufacturing rules in 21 CFR 111 and the labelling rules in 21 CFR 101.36. Where the ingredient was not marketed in the United States before the statutory cut-off, a notification under 21 U.S.C. 350b may be part of the route; whether one is needed, and whether the supporting safety file is adequate, is a determination for the buyer's regulatory team and the agency. There is a second layer in the US that matters for this material. As of this review, a lithium salt is the active substance of a prescription medicine there, so a supplement presentation is reviewed against the rules that keep a drug and a supplement apart as well as against the supplement rules. That is exactly why we do not describe a status: it depends on the presentation, the claims and the destination, and it can change. ## Limits that depend on the dose Contaminants have to be worked out on the finished product, not only on the drum. The catalog limits below are the ingredient gate; the destination text and the daily dose decide what the finished product may contain, and the calculation has to be shown in the file. Catalog contaminant limits and what the file should add | Parameter | Catalog limit | What the file should show | Lead (Pb) | ≤3 mg/kg | Lot result, method and the finished-product calculation | Arsenic (As) | ≤2 mg/kg | Lot result and the agreed limit for the destination | Cadmium (Cd) | ≤1 mg/kg | Lot result and any category exception that applies | Mercury (Hg) | ≤0.1 mg/kg | Lot result and method Because the salt is only 4.28% lithium, the heavy-metal intake from the ingredient scales with the powder mass, not with the lithium figure, which matters in the finished-product arithmetic. Whether any maximum applies to the element itself is a destination question, and it belongs in the same written record as the route. ## Claims and the label The label names the ingredient in the form the destination requires, declares the quantity, and carries only wording the brand's reviewer has cleared. A certificate is not an approval of a claim, and a claim cannot amend a specification. For this material the claim review is unusual, because a wording that would be a structure or function statement for a nutrient may be read differently when the same substance is a medicine in that market. We make no disease-related claim for this product, and this page is not a label or a claim of any kind. The buyer's regulatory team confirms the permitted wording, the permitted dose and the permitted population for the destination before the artwork is signed off. ## Documents in the file The technical set is the specification, a certificate per lot, the technical data sheet and the safety data sheet. Beside it sit the statements the importer needs: allergen, GMO, origin, residual solvents and any customer-specific declaration. The heavy-metal and microbiology results belong with the lot, not in a separate folder that cannot be matched to a pack. The regulatory set is the destination route confirmation, the label and claim review, and the change-control record for the source, the process and the pack. When a statement is not available for a lot, the gap should be named before the order rather than found at the port. Keep a list with versions and dates; a folder of undated PDFs is not a file. ## Checklist before the first order - The specification revision, the CAS number and the word anhydrous all appear on the order. - The destination route is confirmed in writing by the buyer's regulatory team. - The document set — certificate, specification, safety data sheet, allergen, GMO, origin, residual solvents — is complete and dated. - Heavy-metal results are converted to the finished-product dose and checked against the destination text. - Artwork and wording are cleared for the destination and for the population named on the pack. - Source, process and pack are under change control, and the quotation cites the same specification version. The catalog figures are on the lithium orotate product page; the lot certificate is explained on the COA page; the analytical evidence is on the identity page; the salt comparison is on the orotate versus carbonate page; the framework references are in the EU regulatory notes; the release file is described on the quality page. The magnesium orotate file is a useful parallel, because the same acid carries a much more ordinary route question there. ### 06 How we prove a lithium orotate lot is the anhydrous salt URL: https://nutrition.rainwoodbio.com/products/minerals/lithium-orotate/identity/ Reviewed: 2026-11-19 A lithium orotate lot is that salt when five lines agree: the document names the anhydrous salt and its CAS number, IR and HPLC match the reference, the lithium figure sits inside 4.0–4.5%, the loss on drying stays under 1.0%, and the numbers close as a mass balance. The assay alone cannot separate the salt from a blend, because a blend can be built to land inside the assay window. The lithium figure is the direct check on the counter-ion. In one lineThe lithium figure proves the counter-ion, IR and HPLC prove the orotate, and the mass balance shows whether both were measured on the same powder. ## Five layers of identity Naming the right material on paper is not the same as proving it in the drum. Each layer below answers a different question, and a supplier who answers only the first has shown you a document, not a powder. Five layers of lithium orotate identity | Layer | Question it answers | Evidence | What it settles | Document | Is the form named? | Name, CAS 5266-20-6, formula | Only the paperwork | Infrared | Which anion is it? | IR against a reference spectrum | The anion family | Chromatography | Is the anion the right one? | HPLC retention against a standard | The anion, not the cation | Counter-ion | Is the cation lithium? | Titration, or ICP-OES as a cross-check | The salt | Mass balance | Is it diluted? | Assay, lithium, loss on drying | Consistency of the numbers ## The 1:1 ratio: orotate 95.7%, lithium 4.28% Orotic acid is a pyrimidine carboxylic acid with one acidic proton, so the salt pairs one orotate anion with one lithium cation. The molar mass is about 162.03 g/mol, of which 6.94 g is lithium and 155.09 g is the orotate part: 4.28% lithium against 95.7% orotate, a mass ratio of about 1 to 22. That ratio is fixed by the formula and does not move with the assay. It is also the fastest check on a suspicious lot. A powder diluted with orotic acid loses lithium in proportion: a blend with 10% orotic acid reads about 3.9% lithium, outside the window, even though the HPLC assay would still look respectable. A powder extended with lithium carbonate moves the other way, because the carbonate carries 18.8% lithium. Both directions are visible on a single elemental result, which is why the lithium line matters more than its two-decimal appearance suggests. The window is not infinitely sensitive. A one-percent carbonate addition calculates to about 4.4% lithium and about 99% assay, inside both gates. That is the honest limit of a specification: it catches the crude substitution and leaves the small one to a different test. A slurry pH reading and a drop of acid, which would show gas from a carbonate, cost less than an instrument run and belong in the goods-in screen. ## X-ray diffraction: one crystal or two? Diffraction describes the solid: whether it is crystalline, and whether the lines match a reference. For this salt it is most useful against a physical blend, because a mixture of two crystalline solids shows the lines of both. A single-phase pattern that matches the reference, taken with a lithium figure at 4.28%, is a much stronger statement than either result alone. It measures neither purity nor the cation. An amorphous lot can be genuine material, and a crystalline pattern can belong to a diluted blend if the diluent is also crystalline. Before a “pattern matches” sentence is accepted, ask for the reference pattern, the scan range and the detection limit. For routine release, IR and HPLC carry identity; diffraction is the escalation when the solid form or a blend is in dispute. ## What substitution looks like Likely lithium orotate substitutions and the signals | Adulterant | What it does | Signal | Test | Orotic acid | No lithium; lowers the elemental figure | Lithium below 4.0%; assay still plausible | Lithium by titration or ICP-OES | Lithium carbonate | Adds a lithium-dense, alkaline solid | Lithium high; gas on acidification | Slurry pH, acid drop, XRD | Another lithium salt | Wrong anion; different solubility | IR or retention mismatch | IR, HPLC, XRD | Water | Dilutes the as-received figures | Loss on drying above 1.0% | Gravimetric drying | Blend built to pass | Hits assay and lithium windows together | Mass balance that does not close | Full balance plus XRD and pH Colour is the weakest signal: white to off-white covers a wide range and tells you almost nothing about the counter-ion. The stronger signals are the elemental figure, the IR spectrum, the mass balance and the acid test. Appearance and assay without an identity test leave the likeliest substitution untouched. ## Writing identity into the specification - “Lithium orotate, anhydrous, CAS 5266-20-6, C5H3LiN2O4.” - “Assay 98.0–102.0% by HPLC, with the basis stated on the certificate.” - “Lithium 4.0–4.5% by titration, as received; ICP-OES as an independent cross-check on request.” - “Identification by IR and HPLC against a reference; chromatogram and spectrum available on request.” - “Loss on drying ≤1.0%; heavy metals and microbiology as listed.” - “Slurry pH recorded per lot; no carbonate detected by the acid screen.” ## Five questions for the supplier - Which form is this lot, and does the certificate name CAS 5266-20-6 and the anhydrous salt? - What is the lithium result, on which basis, and by which method? - Will you send the IR spectrum and the chromatogram as well as the percentage? - What is the loss on drying for this lot, and does the mass balance close against the lithium figure? - If a lot is contested, will you re-test the retained sample jointly, with the referee lab named up front? Five straight answers make a file. A single assay figure makes a number. The catalog specification is on the product page; each figure is located on the COA page; the salt comparison is on the orotate versus carbonate page; the procedures are collected in the methods library; the release workflow is on the quality page. The sodium molybdate identity page shows the same elemental logic when the metal figure, rather than the anion, carries the proof. ### 01 The zinc sulfate heptahydrate COA, read line by line URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-sulfate/coa/ Reviewed: 2026-11-19 The certificate for a zinc sulfate heptahydrate lot reports appearance, identification, assay by complexometric titration, elemental zinc, water by Karl Fischer, the heavy-metal panel, microbiology and particle size. Each line needs its method, a release limit and a measured result. On this salt the water is not an impurity: 43–46% is the heptahydrate's crystal water, and it fixes how much zinc a gram of powder actually carries. In one lineOn a heptahydrate the water is part of the molecule, so the assay, the zinc figure and the 43–46% water line have to be read together. ## Reading the certificate as a test report A certificate is auditable when every parameter has three parts: what was measured, the method that produced the number, and the limit the lot was released against. A row that reads only “conforms” gives a verdict without the measurement. For a hydrate, the rows that decide the reading are zinc, water and assay, in that order. Identity, assay, water and contaminants · zinc sulfate heptahydrate | Parameter | Method | Release limit | Appearance | Visual | Colourless crystals or white powder | Identification | IR and titration | Conforms to the reference | Assay (as heptahydrate) | Complexometric titration (EDTA) | 99.0–101.0% | Zinc | Complexometric titration | 22.0–23.0% | Water | Karl Fischer | 43.0–46.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh The appearance line is the weakest check: a white powder can be the heptahydrate, the monohydrate, the anhydrous salt or a dilution. Colour is useful when it is wrong — a yellow or brown tint points to iron — while the assay may still pass. ## The basis: as-is, dried, or as the heptahydrate The molecular weight of ZnSO4·7H2O is 287.55, of which 65.38 is zinc, 96.06 is sulfate and 126.11 is water. That gives 22.74% zinc, 33.41% sulfate and 43.86% water, and a conversion factor of 287.55 ÷ 65.38 = 4.398 between the zinc figure and the assay expressed as heptahydrate. A 22.5% zinc result is 98.9% heptahydrate; a 100.5% assay contains 22.85% zinc. The two lines are the same measurement on two scales. The basis has to be printed in the assay row. “99.0–101.0%” on a hydrate is normally as-is: the crystal water is part of the molecule. On the dried basis the water is divided out, and a lot can read 100% while its zinc per gram is low. The certificate should state the basis and report the water result beside it. Water has a legitimate range. 43.0% means some crystal water has been lost and the zinc per gram rises; 46.0% means surface moisture has been picked up and it falls. The water line is a specification line and a storage indicator at once. ## The limit and the measured result The limit is the boundary against which the lot was accepted; the measured figure is what the laboratory found. A result column that repeats the specification range has not reported a result. The table maps each parameter to what its result column should show. What the result column should contain | Parameter | Release limit | Result column | Assay | 99.0–101.0% as heptahydrate | A measured percentage, with the basis and the method | Zinc | 22.0–23.0% | A measured percentage by titration | Water | 43.0–46.0% | A measured percentage by Karl Fischer | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot | Particle size | ≥95% through 40 mesh | The measured percentage through the sieve Two checks catch most certificate errors before a sample is opened. First, convert the zinc result to the heptahydrate scale and compare it with the assay: a gap beyond the method uncertainty means a basis or method problem. Second, add zinc, sulfate and water: on a pure heptahydrate they approach 100%, and a gap of several points suggests a different hydrate, a dilution or an unlisted impurity. ## Batch-to-batch variation Crystallisation and drying move the water first. A drier product has more zinc per gram and a higher assay on the as-is basis; a product that has taken up moisture has less. Crystal size and milling then move the particle-size result, and the 40 mesh figure can change when the mill or the sieve changes without any change in the chemistry. Iron is the impurity that shows on the appearance line. A change of zinc feed or purification can leave a yellow or brown cast that the assay does not report; the heavy-metal panel is the quantitative check, and the colour is the early signal. Moisture also moves the flow: a caked lot usually fails the sieve test as well, so read the water and particle-size results together. The certificate's lot code should tie back to the pouch or drum and to the retained sample. ## When an outside test is worth ordering An independent test is worth ordering for a new source, a first regulated-market shipment, an unproven hydrate claim or a contested result. The panel is not a full repeat: EDTA titration for zinc, Karl Fischer for water, ion chromatography or gravimetric sulfate, ICP-MS for the heavy metals, microbiology, and IR or XRD when the hydrate is in question. Require a detection limit beside every screen; “not detected” with no limit says something about the assay, not the lot. The sample tested should be the one kept for retention; the report should name the lot; a contested result should go to a joint re-test. A single summed heavy-metal figure hides the element that matters, so ask for the individual results. ## Comparing certificates between suppliers Line up six items: hydrate and CAS number, zinc and water results, assay with its basis, heavy metals and microbiology, particle size, and pack with lot code. Two quotations can agree on zinc and still describe different powders if the hydrate differs: the same 22.5% zinc means one thing as a heptahydrate and another as a blend. Traceability is the next question. The certificate should identify the manufacturer, the zinc feed and purification route, and the drying and milling steps. The zinc sulfate product page carries the catalog specification. The tests that separate the hydrates are on the identity page; the grade comparison is on the grades page; the titration and water methods are described in the analytical methods library; the release workflow is on the quality page. ### 02 Zinc sulfate grades: heptahydrate, dried and anhydrous URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-sulfate/grades/ Reviewed: 2026-11-19 Zinc sulfate is supplied as the heptahydrate (ZnSO4·7H2O), the dried monohydrate (ZnSO4·H2O) and the anhydrous salt (ZnSO4), carrying 22.7%, 36.4% and 40.5% zinc. The grade changes the zinc per gram, the water load and the fill weight before it changes anything else. A purchase order that says only “zinc sulfate” has not fixed the grade, the zinc figure or the dose. In one lineThe grade is a hydrate decision: heptahydrate, dried monohydrate and anhydrous salt carry 22.7%, 36.4% and 40.5% zinc, so the same weight is not the same dose. ## Three hydrates of one salt Zinc sulfate crystallises from water with seven molecules of water per zinc. Drying removes six of them and leaves the monohydrate; further heating removes the last. The commercial names follow the process rather than the formula: heptahydrate, dried, anhydrous. “Dried” is a process word, so the water content on the certificate is the only reliable statement of which hydrate is in the drum. The three solids are the same salt at different levels of hydration, not three purities. A dried grade is not “stronger” in the sense of being cleaner; it simply carries more zinc per gram because it carries less water. That distinction matters at the balance, where the formulator weighs a salt, and at the label, where the dose is elemental zinc. Commercial “dried zinc sulfate” is usually the monohydrate at about 35.0–36.5% zinc. An anhydrous grade is also traded, and some suppliers use “dried” for a product closer to anhydrous. The specification should name the hydrate and give a water range, or the buyer is comparing two different powders under one word. ## Three hydrates compared Zinc sulfate hydrates and the anhydrous salt | Property | Heptahydrate | Dried monohydrate | Anhydrous | Formula | ZnSO4·7H2O | ZnSO4·H2O | ZnSO4 | CAS number | 7446-20-0 | 7446-19-7 | 7733-02-0 | Molecular weight | 287.55 | 179.46 | 161.44 | Zinc content | 22.7% theoretical | 36.4% theoretical | 40.5% theoretical | Water content | 43.9% theoretical | 10.0% theoretical | None | Appearance | Colourless crystals or white powder | White powder | White powder | Water solubility | Freely soluble; acidic solution | Freely soluble; acidic solution | Freely soluble; acidic solution | Typical supplement use | Capsules, tablets, powder blends | Dry blends, tablets, low-moisture mixes | Low-moisture systems and specialist uses The last row is the practical split. A capsule or a tablet can take any of the three, but the fill weight changes. A dry blend with a moisture-sensitive active should not be built on the heptahydrate unless the water is accounted for. An aqueous system dissolves all three and the choice comes down to the zinc figure and the label. ## Crystals, powder, water and flow The heptahydrate is efflorescent: in dry air it loses crystal water, and the surface of a crystal can turn to a lower hydrate while the core stays heptahydrate. In humid air it can take up surface moisture instead. Both directions change the water result, the zinc per gram and the flow, which is why the packs need a moisture barrier rather than a plain bag. The catalog form is a 40 mesh powder, with crystals available on request. Crystal size changes the dissolution rate and the dust, not the chemistry. A coarse crystal dissolves more slowly; a fine powder disperses faster but dusts and cakes more readily. A change of particle size is a change of the material as the customer receives it. The acidity is a formulation fact: it affects the taste of a drink mix, the compatibility with carbonate salts and the corrosion of mild steel. The dried forms carry less water into a blend, but they are still soluble salts and still need a sealed pack. ## Zinc arithmetic and the label The label declares elemental zinc, so the weigh-up has to convert from zinc to salt. At the theoretical figures, 10 mg of zinc needs 44.0 mg of heptahydrate, 27.5 mg of monohydrate or 24.7 mg of anhydrous salt. At 15 mg of zinc the weights are 66.0 mg, 41.2 mg and 37.0 mg. These are arithmetic examples, not a suggested intake. Two label anchors are useful for the same calculation. In the EU the reference intake for zinc is 10 mg per day, so a product supplying 10 mg carries 100% of the nutrient reference value; in the United States the daily value used on the Supplement Facts panel is 11 mg. The finished-product dose is checked against the destination's upper limit, and the check uses elemental zinc. The salt weight also sets the dosage form. A 44 mg heptahydrate load fits a small capsule with little excipient; the same zinc as monohydrate is 27.5 mg and may leave room for a second ingredient or allow a smaller tablet. The reverse is also true: a formulator who keeps the heptahydrate fill weight and switches to the monohydrate delivers about 60% more zinc without changing the label. That is a formulation error, not a stronger product. ## Specification lines for the hydrate - “Zinc sulfate heptahydrate, CAS 7446-20-0, ZnSO4·7H2O.” - “Assay 99.0–101.0% as heptahydrate by complexometric titration; state the basis.” - “Zinc 22.0–23.0%; water 43.0–46.0% by Karl Fischer.” - “Appearance: colourless crystals or white powder; particle size ≥95% through 40 mesh.” - “Heavy metals and microbiology as listed; individual element results on the COA.” - “For a dried grade: zinc 35.5–36.5% and water 9.0–12.0%, with the hydrate named.” - “Destination market and intended dosage form confirmed before the order.” Our standard grade is the heptahydrate. The dried monohydrate and the anhydrous salt are different specifications with different zinc figures, and neither is a drop-in at the same weight. Change the hydrate only through change control, with the fill weight and label recalculated. ## When another grade is a mistake Do not switch to a dried grade to “save space” without recalculating the label. The zinc per gram rises, the fill weight falls and the tablet or capsule may miss its target weight or blend uniformity. Do not keep the heptahydrate in a moisture-sensitive blend without accounting for its crystal water either; the water can cake the blend or move into a hygroscopic active. The reverse applies too. A specification written around the heptahydrate, with its water range and crystal form, is not met by a dried lot even when the zinc figure is higher. The form is part of the identity, and a change of hydrate is a change of material. The product hub holds the catalog data for the heptahydrate. The level-four comparison takes the fill-weight arithmetic further; the COA page shows how the hydrate is reported; the zinc oxide page and the zinc citrate page show the other zinc sources, where the zinc figure per gram is different again; the analytical methods library covers the titration and water methods. ### 02.1 Zinc sulfate heptahydrate vs dried: the zinc figure and the fill weight URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-sulfate/grades/zinc-sulfate-heptahydrate-vs-dried/ Reviewed: 2026-11-19 Dried zinc sulfate, normally the monohydrate, carries about 36.4% elemental zinc; the heptahydrate carries 22.7%. To deliver the same zinc, the heptahydrate needs about 1.6 times the mass, so a switch between the two changes the fill weight, the excipient load and the label arithmetic. The zinc figure, not the salt weight, is the number the label declares. In one lineDried zinc sulfate carries about 36% zinc against 22.7% in the heptahydrate, so the same fill weight delivers roughly 60% more elemental zinc. ## What “dried” means on a zinc sulfate order “Dried zinc sulfate” is a process name, not a formula. It usually means the monohydrate, ZnSO4·H2O, CAS 7446-19-7, made by removing six of the seven water molecules from the heptahydrate. Some suppliers use the same words for a product closer to the anhydrous salt, and a few sell blends. The certificate's water result is the only reliable statement of which hydrate is in the drum. The difference is water, not purity. Both grades are zinc sulfate, both dissolve freely and both give an acidic solution. The heptahydrate carries 43.9% water by theory; the monohydrate carries 10.0%; the anhydrous salt carries none. Everything that follows — the zinc per gram, the fill weight, the flow, the caking risk — comes from that one number. The hydrate and the dried grade at a glance | Property | Heptahydrate | Dried (monohydrate) | Formula and CAS | ZnSO4·7H2O · 7446-20-0 | ZnSO4·H2O · 7446-19-7 | Molecular weight | 287.55 | 179.46 | Zinc content | 22.7% theoretical | 36.4% theoretical | Water content | 43.9% theoretical | 10.0% theoretical | Zinc per 100 g | 22.7 g | 36.4 g | Appearance | Colourless crystals or white powder | White powder ## The zinc figure per gram The conversion is fixed by the formula. For the heptahydrate, 1 g of zinc is 4.40 g of salt; for the monohydrate it is 2.75 g; for the anhydrous salt it is 2.47 g. Read the other way, 100 g of heptahydrate delivers 22.7 g of zinc, 100 g of monohydrate delivers 36.4 g, and 100 g of anhydrous salt delivers 40.5 g. The ratio between the two supplement grades is 36.4 ÷ 22.7 = 1.60. That ratio is the whole comparison. A 25 kg drum of heptahydrate contains about 5.7 kg of zinc; the same drum of monohydrate contains about 9.1 kg. The dried grade is not a better material, but it is a more concentrated one, and freight, storage and fill weight all follow the concentration rather than the net weight on the label. ## The fill weight and the capsule Work the arithmetic on a label that declares 10 mg of zinc. As heptahydrate it needs 10 ÷ 0.2274 = 44.0 mg of salt; as monohydrate it needs 10 ÷ 0.3643 = 27.5 mg. At 15 mg of zinc the weights are 66.0 mg and 41.2 mg. The difference is 16.5 mg at the 10 mg label and 24.8 mg at the 15 mg label, which is the space the formulator gains or loses in the capsule. The dangerous case is a switch without the arithmetic. Keep the 44.0 mg fill and use the monohydrate, and the same capsule now delivers 44.0 × 0.3643 = 16.0 mg of zinc against a 10 mg label — about 60% more than declared. Correct the fill to 27.5 mg and the capsule may be too small to handle, or the blend may need more excipient to reach a workable weight. Either way the change belongs in the specification, not at the balance. Low-dose blends have a second problem: 27.5 mg of salt in a 500 mg capsule is a small fraction of the fill, so blend uniformity and the choice of carrier matter more than they do at 44.0 mg. A direct-compression tablet built on the dried grade also takes a different weight and a different hardness target. ## What the label declares The label declares elemental zinc, not the hydrate. In the EU the ingredient list names the source as “zinc sulphate”, and the nutrition declaration gives the zinc mass and the percentage of the nutrient reference value, which is 10 mg per day. In the United States the Supplement Facts panel reads “Zinc (as zinc sulfate)” with the elemental mass and the percentage of the 11 mg daily value. Neither label has to spell out the hydrate, but the specification and the COA should. That split is the source of most confusion. A label that says 10 mg of zinc is satisfied by 44.0 mg of heptahydrate or 27.5 mg of monohydrate; the label is right in both cases and the capsules are different. The hydrate belongs in the purchase specification, the certificate and the change-control record, while the label carries the zinc figure the consumer reads. The label also carries the destination's rules. Zinc has a tolerable upper intake level in the markets that set one, and the finished-product dose is checked against it by the brand's regulatory team. The salt weight is a manufacturing number; the zinc mass is the number that is regulated. ## What to recheck when you switch A change from heptahydrate to dried, or back, is a change of material and should be handled as one. Recalculate the fill weight from the certificate's zinc result, not from the theoretical figure alone. Recheck the blend flow, the tablet weight and hardness, the capsule fill, and the water result of the finished blend. Re-run the stability work if the pack or the moisture environment changes. Update the specification, the bill of materials, the label artwork if the zinc mass moves, and the supplier's change-control record. Keep a retained sample of both grades so that a disputed fill can be traced. A 1:1 swap by mass is the error to avoid: it is a 60% increase in zinc, not a neutral substitution. ## How to write the choice into the specification - “Zinc sulfate heptahydrate, CAS 7446-20-0, Zn 22.0–23.0%, water 43.0–46.0%.” - “Dried zinc sulfate monohydrate, CAS 7446-19-7, Zn 35.5–36.5%, water 9.0–12.0%.” - “Assay by complexometric titration; state the basis and report the zinc result.” - “Fill weight calculated from the certificate's zinc result, not from the theoretical figure.” - “Particle size ≥95% through 40 mesh; heavy metals and microbiology as listed.” - “No substitution of hydrate without written change control and a label check.” The zinc sulfate product page carries the catalog heptahydrate specification; the grades page places this comparison in the wider range; the zinc oxide page and the zinc citrate page show how different zinc sources compare on the same elemental basis; the quality page describes the release file and the change-control route. ### 03 Zinc sulfate heptahydrate: water, caking and the pack URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-sulfate/stability/ Reviewed: 2026-11-19 Zinc sulfate heptahydrate is efflorescent: in dry air it loses crystal water, and in humid air it can pick up surface moisture and cake. The water figure, not the assay, is the first number to move, and it changes the zinc per gram. A sealed moisture barrier, a controlled store and a pack-specific retest period keep the hydrate and the fill weight where the specification put them. In one lineThe heptahydrate's 43–46% water is the stability variable: a dry store and a sealed moisture barrier keep the hydrate, the zinc figure and the flow the same. ## The powder: water in both directions The 43–46% water in the specification is crystal water, held in the lattice, and it is not fixed. A heptahydrate left in dry air loses water from the surface and forms a lower hydrate; the process is slow at ambient humidity but faster in a heated, dry warehouse or a desiccated container. The zinc per gram rises as the water leaves, and the assay on the as-is basis rises with it. In humid air the movement reverses. The salt takes up surface moisture, the powder becomes sticky and then caked, and the water result climbs toward the top of the range. Caking is not only a handling problem: a caked lot usually fails the 40 mesh sieve test, so the water and particle-size results should be read together. The pack is where the control lives. The 1 kg foil pouch and the 25 kg fiber drum rely on a liner and a seal; a folded-over pouch is not a resealed pouch. After opening, keep the remainder in a smaller moisture-barrier container and record the date; after cold storage, let the pack reach room temperature before opening so condensation does not form on the powder. ## The solution: acidic, corrosive and not preserved Zinc sulfate dissolves freely and the solution is acidic. The acidity comes from the zinc ion and the sulfate, and it is strong enough to matter in a drink mix, where it shapes the taste and the pH, and in a plant, where it attacks mild steel. Tanks, lines and pumps in contact with the solution should be selected for the duty; a carbon-steel elbow that is fine with water may not stay fine with an acidic salt solution. The solution is also a growth medium. Zinc is not a preservative, and a dilute tank with sugar or protein in it will support microorganisms. A liquid hold needs a validated hold time, pH and temperature control, and a microbiology check. A bulk-powder stability result does not transfer to a solution, because the water activity is different and the chemistry has a second phase. A concentrated stock may need warming or agitation, and a hot stock cooled too quickly can crystallise in the line. Dissolve at the lowest workable temperature and use the solution within the validated hold. ## What drives the change Factors that move zinc sulfate heptahydrate during storage | Factor | What it does | Control | Low humidity | Efflorescence; crystal water lost; zinc per gram rises | Sealed pack; avoid desiccated stores | High humidity | Surface moisture; caking; water result rises | Moisture-barrier liner; controlled store | Temperature cycling | Condensation at the liner; caking at the surface | Stable store; equilibrate before opening | Acidity in contact | Corrosion of mild steel; metal pickup | Compatible materials; rinse and dry | Compression | Caking in drums and tablet presses | Controlled load; free-flowing powder | Microbiology in solution | Growth in a dilute, nutrient-containing hold | Validated hold time; hygiene; testing Light is a minor factor for this salt: the heptahydrate is not a photolabile molecule, and a clear container is a handling question rather than a degradation route. The factors that matter are water, temperature cycling and contact materials. A warm, humid store with a steel scoop left in the drum combines two of them. ## A stability protocol for the powder and solution The protocol fixes the pack, the condition, the time points and the tests. Warehouse conditions are covered by 25 °C/60% relative humidity for the long term and 30 °C/65% relative humidity for the intermediate arm; 40 °C/75% relative humidity is the accelerated arm that stresses the pack. A low-humidity arm at 25 °C/30% relative humidity is worth adding for a heptahydrate, because efflorescence is the failure mode that a standard humid cabinet misses. Test water by Karl Fischer, assay by titration, zinc, appearance, particle size and microbiology at each point. Weigh the pouch or drum at each point: a net-weight change is the earliest signal that the pack is exchanging water with the room. For a tablet or capsule, test the finished unit too, because the excipients and the shell change the moisture equilibrium. Show every result rather than a pass statement, and name the pack and lot family. The pouch and the drum differ in headspace and in surface-to-volume ratio, so one pack's data cannot vouch for the other. ## The dosage form changes the answer A capsule or tablet runs at low water activity, yet the shell, the excipients and the room still move moisture. The heptahydrate's crystal water can migrate into a hygroscopic active or into the shell, and the tablet can soften or the capsule can become brittle. Test the finished unit at release and after storage, and check the water result of the blend as well as the salt. A dry blend with a carbonate is a specific case. Zinc sulfate is acidic, and an acidic salt in contact with sodium bicarbonate can react, release carbon dioxide and generate water inside the pack. That is a formulation decision, not a storage one, but it shows why the salt's acidity belongs in the stability review. A beverage combines acidity, water and heat. The pH, the buffering, the process temperature and the hold time all act at once, and a pasteurisation step adds a heat load that the powder never sees. The ingredient's bulk stability is the starting point; the drink's shelf life has to be measured in the drink. ## How the retest period is assigned There is no single shelf-life figure for zinc sulfate heptahydrate: the pack and the storage condition set it. The retest period is written into the specification and backed by data from the exact pack. Without a named pack, a condition and a test panel, a shelf-life figure is an assertion rather than data. At the end of the retest period, the retained sample is re-assayed before any extension. Recheck water as well as zinc: a lot can pass the assay and still have lost crystal water, which changes the zinc per gram and therefore the fill. Never extend a retest date by assumption, and never transfer a bulk result to a repacked container. The zinc sulfate product page lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the analytical methods library describes the water and titration methods; the quality page describes the release workflow and the retest record. ### 04 Ordering zinc sulfate: MOQ, packs and lead time URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-sulfate/moq/ Reviewed: 2026-11-19 The MOQ for zinc sulfate heptahydrate is 1 kg, packed in a foil pouch; the bulk pack is a 25 kg fiber drum and the standard lead time is 1–7 days. A firm quotation needs the hydrate, the zinc and water limits, the quantity and pack, the destination and Incoterm, the documents and the intended use. The pouch is for trials and qualification; the drum is for production. In one lineThe 1 kg pouch is the trial unit because a lot can be sampled, tested and traced from it, while the 25 kg drum is the pack that supplies a production batch. ## Why the first pack is 1 kg A kilogram covers a bench trial, a retained sample and an independent identity test, and it travels as a parcel. The pouch has its own lot code, so the sample, the certificate and the trial result point back to one pack. Below 1 kg the material is normally split from a larger lot and repacked, which adds handling and breaks the original pack identity without changing the chemistry. The heptahydrate makes the choice more interesting than it looks. Water is about 44% of the net weight, so a 25 kg drum holds roughly 11 kg of water and 5.7 kg of zinc; the same drum of dried monohydrate holds about 9.1 kg of zinc. Freight and warehouse space follow the net weight, while the value follows the zinc, so two grades are easier to compare per kilogram of zinc than per drum. The minimum is set by the pack, not by a volume target. A drum cuts handling per kilogram of zinc but ties up inventory and storage, and the heptahydrate needs a dry store. A project that needs 3 kg for a pilot should not buy a drum and leave the remainder in a humid room. ## Packs, formats and net weight Standard zinc sulfate packs and formats | Pack or format | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal after opening; lot code on the pouch | Fiber drum | 25 kg | Production | Inner liner; keep the liner closed; lot code on drum and liner | Crystals, on request | 1 kg or 25 kg | Coarser dissolution and lower dust | Same specification; crystal size is a separate line The catalog form is a 40 mesh powder: ≥95% through 40 mesh. Crystal size changes dissolution, dust and flow, not the assay. A coarser crystal or a narrower sieve cut must be agreed before the quotation, because it changes the particle-size line and can change the lead time. The pack is not the place to discover that the powder will not flow on the customer's line. ## Lead time, dispatch and transit From confirmation, the standard pack is dispatched within 1–7 days. Picking, documents and dispatch sit inside that window; transit, customs and the customer's quality release do not. A crystal cut, a non-standard pack or a split adds time, and the quotation should show it as a separate line. Ask when the lot will leave, not only how long the lead time is. The drum moves on a pallet and the pouch as a parcel; the Incoterm assigns freight booking and customs entry. The COA, specification and any market statement should travel with the lot rather than follow in a separate email. Zinc sulfate does not need a cold chain, but it does need a dry one. A drum left on a wet dock or in a container that sweats can arrive caked even though the certificate was correct at dispatch. For a long sea leg, agree the liner and desiccant specification and inspect the drum on arrival. ## What makes a quotation firm Six details make a quotation comparable: - Product and hydrate. Zinc sulfate heptahydrate, CAS 7446-20-0, with the hydrate written out. - Specification. Assay and basis, zinc range, water range, particle size, heavy metals and microbiology. - Quantity and pack. 1 kg pouch, 25 kg drum or a crystal cut. - Destination and Incoterm. Country, delivery point and trade term. - Documents. COA, specification, SDS and the market statements the importer requires. - Intended use and market. Supplement, food or feed, and the country of sale. A quotation that says only “zinc sulfate” is incomplete: the same words cover three hydrates with zinc figures from 22.7% to 40.5%. The hydrate and the zinc range belong in the offer. ## The sample must be a lot The 1 kg pouch is the qualification sample. Before scaling, test zinc, water, assay and microbiology, and retain a sample from that same pouch. The sample, certificate and quotation must all show one lot code. A sample with no lot link only demonstrates; it does not qualify. A bench trial that needs less than a kilogram should be agreed before the order is placed. A split from a bulk lot becomes a repack, with its own traceability and its own record. A bench sample and a production drum need not share a lot, and a specification should not be built on an unreleased sample. ## Quality schedule before the first order The quotation covers commercial terms, the Incoterm, pack size, lead time and documents. Change control, the retest period, the retention sample, a COA per lot and the specification revision form the quality schedule. Sign the quality agreement before the first production order, not during the first dispute. Returns and replacements are handled under the quality agreement and the quotation. A failed lot is settled on the retained sample and a joint re-test, not on a photograph. Agree who pays for the referee test and which laboratory both sides accept, and write it down before dispatch. The product hub carries the catalog specification; the stability page covers storage and caking; the grades page compares the hydrates; the analytical methods library covers the release tests; the quality page describes the release file and the retest record. ### 05 Building the zinc sulfate regulatory file URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-sulfate/compliance/ Reviewed: 2026-11-19 Zinc sulfate is a source of elemental zinc, so the regulatory file is built around the zinc dose and the route the destination allows, not around the salt name alone. The buyer's regulatory team confirms the route for the finished product in its market. This page names the instruments to check, the contaminant and label figures that belong in the file, and the documents that should travel with the lot. In one lineA zinc sulfate file is a route question first: which zinc source the destination allows, at what dose, and how the label declares the elemental zinc. ## What the file has to answer A complete file should settle four points. What exactly is being bought, and which specification revision applies? Which lot does the certificate cover, and what did it measure? Which route, limits and label rules govern the finished product where it will be sold? What is the change-control route if the source, process or pack changes? The COA covers the lot, the TDS the specification and the SDS the handling; none establishes the route by itself. For a mineral salt the route question has two layers. The first is the substance: whether the destination list includes zinc sulphate as a source of zinc for the intended category. The second is the finished product: the dose, the label, the claims and the contaminant calculation. The file should carry version numbers, because an undated certificate and an undated specification cannot be compared. ## European Union In the EU, zinc sulphate appears in Annex II to Directive 2002/46/EC, the list of vitamin and mineral substances permitted in food supplements, as of this review. The buyer's regulatory team confirms that the entry and its conditions cover the finished product. General food law (Regulation (EC) No 178/2002), labelling (Regulation (EU) No 1169/2011) and the contaminant regulation (Regulation (EU) 2023/915) apply alongside the supplement directive. The labelling file uses the nutrient reference value for zinc, which is 10 mg per day in Annex XIII to Regulation (EU) No 1169/2011. The nutrition declaration gives the zinc mass per portion and the percentage of that reference value. The ingredient list names the source; “zinc sulphate” is the name the buyer's reviewer checks against the destination language version. The contaminant file is a finished-product calculation. The maximum levels for lead, cadmium and mercury apply to the supplement as sold, and the calculation has to show that the daily dose stays inside them. The current text and any category exception are checked at the time of the order. ## United States In the United States, 21 CFR 182.8997 lists zinc sulfate as generally recognized as safe when used in accordance with good manufacturing practice, and it is used as a nutrient supplement, as of this review. The finished product is marketed under the dietary-supplement route, with its own labelling and GMP requirements. The buyer confirms that the ingredient, the dose and the label fit that route. The Supplement Facts panel declares “Zinc (as zinc sulfate)” in elemental zinc, with the percentage of the daily value. The daily value used on the panel is 11 mg for adults and children four years and older, as of this review. The panel is built on the elemental figure, so the hydrate belongs in the specification and the certificate, not in the supplement facts. Structure/function statements are reviewed by the brand and carry the required disclaimer; disease claims are not made. The label review is separate from the certificate, and a certificate does not approve a claim. ## Contaminants and the zinc dose Contaminant limits apply to the finished product, so a drum result is only the input. Use the table as a checklist, then apply the current text and the daily dose. Contaminant references to convert to the finished product | Parameter | Typical supplement reference | What the file should show | Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method, limit and the finished-product calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception that applies | Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result and method | Arsenic (As) | Customer or market limit | The agreed limit and the method, stated on the certificate | Zinc dose | Destination upper limit for the age group | The elemental zinc per daily portion and the check against that limit Zinc has a tolerable upper intake level in the markets that set one. In the United States the adult level is 40 mg per day from all sources, as of this review; the European Food Safety Authority set 25 mg per day for adults in its re-evaluation, with lower values for younger age groups. The figure is checked in its current form and against the age group on the label. The salt weight is not the dose; the elemental zinc is. ## Label wording and claims The label names the material, the elemental zinc mass and the source in the form the destination requires. A nutrient content claim such as “source of zinc” needs 15% of the nutrient reference value in the portion, which for a supplement is the daily dose; “high” needs 30%. At the EU reference value of 10 mg, those thresholds are 1.5 mg and 3.0 mg of zinc. The brand's reviewer checks the current annex and the conditions before the wording is used. Health claims are a separate file. The EU register of authorised claims sets the permitted wording and the conditions for zinc; the brand selects a wording that is on the register and keeps the evidence with the label. In the United States, a structure/function statement needs the disclaimer and must not be a disease claim. ## Documents that belong in the file - Specification with the hydrate, CAS number, assay basis, zinc range and water range. - COA for the lot, with individual heavy-metal results and the microbiology panel. - Technical data sheet and safety data sheet. - Allergen and GMO statements, origin record and a packaging declaration. - Contaminant calculation for the finished product and the daily dose. - Label artwork and claim review, with the destination and the date of the review. - A change-control record covering source, process and pack. Any missing statement should be named before the order rather than discovered at the port. Version numbers on the list are worth more than a folder of undated files. Catalog data is on the product hub; the COA page explains the lot certificate; the identity page covers the analytical evidence; the quality page describes the release file; the analytical methods library covers the test methods. ## Pre-order checklist - The specification revision, hydrate and CAS number are stated. - The destination route and the finished-product category are confirmed by the buyer. - The elemental zinc per daily portion is checked against the destination's upper limit. - Contaminant figures are recalculated for the daily dose of the finished product. - Label, nutrient declaration and claim wording have had a destination review. - Source, process and pack sit under change control, and every document carries a version. ### 06 Proving a zinc sulfate lot is the heptahydrate URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-sulfate/identity/ Reviewed: 2026-11-19 A zinc sulfate lot is the heptahydrate when the document names the hydrate and CAS number, complexometric titration gives 22.0–23.0% zinc, Karl Fischer gives 43.0–46.0% water, the sulfate figure closes the mass balance, and IR or X-ray diffraction matches the heptahydrate reference. The assay alone cannot separate the hydrates or a dilution. Identity is the set of figures agreeing, not one percentage on its own. In one lineIdentity is the zinc figure, the sulfate figure and the water figure agreeing on the same hydrate, not the assay percentage on its own. ## Identity evidence, layer by layer A certificate can carry the right name and still not demonstrate it. Each layer is a separate question with its own evidence. An answer that stops at the first question describes paperwork, not powder. Identity evidence for zinc sulfate heptahydrate | Layer | Question | Test | What it proves | Document | Is the hydrate named? | Name, CAS number, formula | Paperwork only | Zinc | Is the zinc figure right? | Complexometric titration (EDTA) | The zinc content, not the hydrate | Water | Is it the heptahydrate? | Karl Fischer | The hydration state | Sulfate | Is the anion sulfate? | Ion chromatography or gravimetric sulfate | The salt, and the mass balance | Solid state | Is the crystal the heptahydrate? | IR, and XRD for a dispute | The hydrate as a solid The catalog identity is “IR and titration conform”. That is a reasonable release gate, but it does not report the water or the sulfate as numbers. When the hydrate is disputed, ask for the Karl Fischer result, the sulfate result and the diffraction pattern; a conformity statement is not a measurement. ## The zinc, sulfate and water ratio The formula fixes the mass balance. In 100 g of pure ZnSO4·7H2O there are 22.74 g of zinc, 33.41 g of sulfate and 43.86 g of water. The zinc-to-sulfate mass ratio is 22.74 ÷ 33.41 = 0.681, and the molar ratio is 1:1. The zinc figure and the assay expressed as heptahydrate are related by 287.55 ÷ 65.38 = 4.398, so 22.5% zinc is 98.9% heptahydrate and 100.5% assay is 22.85% zinc. Read the three figures together and the hydrate identifies itself. Zinc high with water low points to the monohydrate or the anhydrous salt; zinc low with water normal points to a dilution or a different zinc salt; water high with zinc low points to surface moisture. A lot with 23.0% zinc and 44.0% water is not a pure heptahydrate: the zinc figure is above the stoichiometric 22.74%, so either the method reads high or another zinc species is present. A blend of hydrates is caught by the same ratio. A powder made from heptahydrate and monohydrate can be formulated to land inside the assay range, but its water figure falls in proportion to the dried fraction. The assay sees the zinc; the water sees the hydrate. That is why the water line belongs on the certificate even though it looks like an impurity line. ## IR and X-ray diffraction: the solid-state check IR is the routine identity test because it is fast and it sees both the sulfate and the water bands. It can separate the heptahydrate from the monohydrate when the spectra are compared with a reference, but the difference is subtle and a library match is only as good as the library. The release identity should name the reference material and the band region used. X-ray diffraction answers the question more directly: does the solid give the heptahydrate pattern? The three hydrates have different unit cells, so the peak positions differ, and a mixture shows both sets of peaks. XRD is not a purity assay and it does not measure the water content, but it is the strongest evidence that the crystal in the drum is the hydrate named on the certificate. A “match” claim needs the reference pattern and a stated detection limit in the report. A report that says only “XRD conforms”, without the pattern or the reference, has added little. XRD is the test to order when a supplier's hydrate claim is disputed or when two sources are being compared for a specification change. ## What substitution looks like Substitutions and the signals on a zinc sulfate certificate | Substitution | What it changes | Signal | Test | Monohydrate sold as heptahydrate | Zinc per gram up; water down | Zn above 23.0%; water below 43.0% | Karl Fischer, XRD | Sodium sulfate dilution | Zinc down; sodium up | Zn low; sodium present; assay low | ICP-OES, mass balance | Magnesium sulfate | Zinc down; magnesium up | Zn low; Mg present; different crystal | ICP-OES, XRD | Zinc oxide blend | Insoluble zinc; sulfate down | Turbid solution; sulfate below 33% | Solubility, sulfate, XRD | Technical grade | Heavy metals up | Pb, Cd or As above the agreed limit | ICP-MS | Surface moisture | Water up; zinc per gram down | Water above 46.0%; caking | Karl Fischer, sieve Zinc sulfate is a commodity salt, so the common problems are grade and hydrate rather than an elaborate fake. A technical grade that passes the zinc assay can still fail the heavy-metal panel, and a dried lot can pass the assay while failing the water line. Colour is a weak signal on its own: a white powder can be any of the three hydrates, and a yellow tint points to iron rather than to a different zinc salt. ## Identity lines for the specification - “Zinc sulfate heptahydrate, CAS 7446-20-0, ZnSO4·7H2O.” - “Assay 99.0–101.0% as heptahydrate by complexometric titration; state the basis.” - “Zinc 22.0–23.0%; water 43.0–46.0% by Karl Fischer.” - “Sulfate by ion chromatography or gravimetric method; report the result.” - “Identification by IR against a named reference; XRD on request.” - “Heavy metals by ICP-MS, individual elements; microbiology as listed.” - “No substitution of hydrate or grade without written change control.” ## Five questions before approval - Which hydrate is this lot, and which CAS number is on the certificate? - What are the zinc and water results, and what methods produced them? - What is the sulfate result, and does the mass balance close to 100%? - Can you provide the IR spectrum and, if the hydrate is disputed, the XRD pattern with its reference? - Would you agree to a joint re-test of the retention sample if the lot is challenged? Five direct answers amount to an identity file; a single assay percentage does not. The product hub carries the catalog specification; the COA page shows where each figure sits on the certificate; the grades page compares the hydrates; the analytical methods library explains the titration, water and diffraction methods; the quality page describes the release and re-test route. ### 01 Reading a GABA certificate: identity, assay and moisture URL: https://nutrition.rainwoodbio.com/products/amino-acids/gaba/coa/ Reviewed: 2026-11-19 The certificate for a GABA lot reports appearance, identification by infrared spectrum and HPLC retention, assay by HPLC, loss on drying, the pH of a 1% solution, the heavy-metal panel, microbiology and particle size. Every line should carry the method and the release limit, with the measured result in a column of its own. The ranges in the first table are the catalog specification; the batch certificate is the document that confirms a particular pack. In one lineA GABA certificate is complete when the assay names its HPLC detection, the loss on drying sits beside it, and the identity rests on a spectrum as well as a retention time. ## The certificate, line by line A certificate is auditable when every row answers three questions: what was measured, by which method, and against which limit. GABA has no chiral centre and no counter-ion, so there is no rotation line and no salt ratio to read. The identity has to come from the spectrum and the chromatogram, and those are the rows to open first. A row that says only “conforms” states a conclusion; the spectrum and the retention time are the evidence behind it. Identity, assay and purity limits · GABA | Parameter | Method | Release limit | Appearance | Visual | White crystalline powder | Identification | IR spectroscopy and HPLC retention | Spectrum and retention conform to the reference | Assay | HPLC with amine derivatisation or ninhydrin detection | 99.0–101.0% | Loss on drying | Gravimetric | ≤0.5% | pH (1% solution) | Potentiometric | 6.5–7.5 | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh The pH row is not a formality: a 1% solution of this zwitterion sits at 6.5–7.5, and a figure outside that range points to an acid residue, a different salt or a basic carrier. ## The assay needs a detection method GABA has no strong ultraviolet chromophore, so an HPLC method has to make the molecule visible. The usual routes are pre-column derivatisation of the amine, ion-exchange separation with post-column ninhydrin, or a detector that does not depend on absorbance. The certificate should name the reagent, the column and the detection mode. An assay figure without them cannot be repeated in a second laboratory and cannot be compared with a figure from another supplier. The basis is the other half of the number. The catalog range is 99.0–101.0%, and the certificate should say whether the figure is on the dried basis or on the powder as received. The loss on drying is ≤0.5%, so the gap between the two bases is small: a lot at 99.0% as-is with 0.4% moisture reads 99.40% on the dried basis (99.0 ÷ 0.996). Small, but it is exactly the gap that decides a release against a 99.0% floor. A range that reaches 101.0% also asks about the standard: which reference material was used, and whether the result is corrected for its purity. ## Release limit against batch result The release limit is the boundary for the lot; the batch result is what the laboratory measured. Both belong on the certificate, in separate columns, with the method named beside them. A result column filled with the specification range is not a result; it is a copy of the gate. What the result column should show | Parameter | Release limit | Result column | Assay | 99.0–101.0% | A measured percentage with its basis, standard and detection | Loss on drying | ≤0.5% | A measured percentage | pH (1% solution) | 6.5–7.5 | A measured pH with the concentration | Heavy metals | Per element | A figure in mg/kg for each element | Microbiology | Counts and absence | A count and an absence statement for the lot | Particle size | ≥95% through 40 mesh | The measured percentage through the sieve “Passes specification” is a conclusion the reader should be able to reach without taking it on trust: four figures for the heavy metals, because a total hides which element is present, and a count plus an absence statement with its detection limit for microbiology. ## What moves from lot to lot GABA is made by enzymatic decarboxylation of L-glutamate or by chemical synthesis, and the route leaves a different impurity fingerprint. Residual glutamate, a salt load from a neutralisation step and a residual solvent belong to one route and not necessarily to the other. None of them has to fail the assay, which is why the related-substance profile is worth asking for. Drying moves the loss on drying; milling and sieving move the particle-size result. A fine hygroscopic powder also carries static, so a sieve figure can shift with the weather in the packing room and not only with the mill. Colour and caking move with moisture, and neither is an identity failure. A trend across lots says more than one result near an edge: an assay drifting towards 99.0%, a pH edging down, a new small peak in front of the main one. The lot code on the certificate should match the pouch, the drum and the retained sample; where it does not, the document describes a different pack. ## When an outside test is worth ordering Order an independent test for a new source, a first shipment into a regulated market, a disputed result, or a lot presented as GABA when a neighbouring amino acid is possible. The useful panel is not a copy of the certificate: an infrared spectrum against the reference, an HPLC run that resolves GABA from beta-alanine and alanine, elemental carbon and nitrogen, loss on drying, ICP-MS for the four elements and the microbiological count. A chloride or ash figure is worth adding when the source is new, because the catalog carries no line for either and a salt cut would otherwise stay invisible. Ask the laboratory to report its detection limit for each screen: a “not detected” line without a limit is evidence about the method, not about the sample. Keep the chain of custody. The sample tested should be the retained sample, and the report should identify the lot. When a result is contested, give the referee the retained sample, the supplier's certificate and the specification, and ask for the tests that separate the materials rather than a repeat of the same assay. ## Six lines to compare between suppliers Put six lines side by side: the name and CAS number, the assay with its method and basis, the identity evidence, the moisture and pH, the contaminant and microbiological results, and the pack with its lot code. Two quotations that both say 99% but differ on the method or the basis are not describing the same powder. The second layer is traceability: who manufactured the lot, by which route, with which drying and milling steps, and which specification revision applies. The GABA product page carries the catalog specification. The identity page sets out the evidence that separates this amino acid from its nearest neighbours; the comparison with beta-alanine covers the substitution that is easiest to miss; the HPLC method note describes the separation, and the quality page describes the release workflow. ### 02 GABA grades: purity, particle size and route URL: https://nutrition.rainwoodbio.com/products/amino-acids/gaba/grades/ Reviewed: 2026-11-19 GABA is sold as the free amino acid. There is no salt, chelate or ester in the catalog, so a grade is not a chemical form; the molecule is C4H9NO2 at every grade. What a grade fixes is the purity envelope, the contaminant and documentation set, the particle size and the manufacturing route, and those are the lines that move when a buyer asks for something other than the catalog material. In one lineGABA has no salt to choose, so the grade decision is the purity envelope, the particle size and the manufacturing route. ## Why the grade question is not a salt question Mineral ingredients are chosen by their carrier: the same magnesium can arrive as an oxide, a citrate or a bisglycinate, with a different share of the element each time. GABA offers no such choice. The amino acid is the ingredient, the label name does not change with the grade, and there is no ratio to declare between a carrier and an active. That removes one decision and puts weight on three others. The first is the purity envelope: how wide the assay range is and which related substances are limited. The second is the contaminant and microbiological panel, which is what separates a material sold for food or supplement use from one sold for another purpose. The third is the physical form, because a 40 mesh powder and a granule behave differently on a tablet press and in a stick filler. The route sits behind all three. Enzymatic decarboxylation of L-glutamate and chemical synthesis lead to the same molecule and to different impurity fingerprints, and a specification that names the route is easier to hold to than one that does not. ## The catalog grade and what a different grade changes The catalog grade, and the questions a different grade raises | Line | Catalog grade | What to re-check on another grade | Assay | 99.0–101.0% by HPLC | Is the range wider, and is the method the same? | Identity | IR spectrum and HPLC retention | Does the certificate show a spectrum, or only a retention time? | Loss on drying | ≤0.5% | Is the moisture allowance wider? | pH (1% solution) | 6.5–7.5 | Is the pH row present at all? | Heavy metals | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Which element limits apply, and are they per element? | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Is the panel specified, or absent from the certificate? | Particle size | ≥95% through 40 mesh | Which cut, and was it measured on the lot? | Documents | COA, TDS, SDS, allergen and origin statements | Which statements are missing, and are they lot-specific? The table is not a second specification. It is the list of lines to re-read when the material offered is not the catalog grade. A wider assay range can be acceptable for a technical use and is not acceptable under a label that declares 99%; a shorter document set can be acceptable for an industrial buyer and is not enough for a supplement file. The grade has to match the use, not the other way round. ## Particle size, flow and dust The catalog form is a crystalline powder with ≥95% through 40 mesh, which is roughly 425 µm. The sieve figure is a finishing specification: it changes when the mill or the sieve changes, without any change in the chemistry. It is also the line that decides how the powder behaves in a hopper. Solubility is not the constraint here. The material is freely soluble in water and the solution is neutral. Handling is the constraint. A fine hygroscopic powder picks up moisture in an open room, cakes in a hopper and carries static through a vacuum transfer line, and the same lot can flow well on a dry day and poorly on a humid one. Granulation answers the flow and dust problem by building larger particles. It is a different particle-size specification, not a packing choice, and the granule must still meet the same assay, moisture and contaminant lines. A granulated grade also wets and dissolves at a different rate, which the formulator has to confirm in the finished mix rather than assume from the powder data. ## The dosage form decides which grade is useful A capsule or a tablet takes the 40 mesh powder when the fill or the compression is forgiving, and a granulated grade when flow or dust is the problem. A stick pack takes the powder because it dissolves quickly, and the foil is there because the powder is hygroscopic. A beverage takes the same powder into water, and the questions move to pH, heat load and preservation. A gummy brings water and heat into the same step, which is where browning becomes possible. GABA decomposes near 200 °C rather than melting cleanly, so a process temperature well below that is not the difficulty. Water, pH and reducing sugars are. The grade does not change any of them; it decides the particle size and the document set that the formula has to work with. The amount per serving is a label decision, not a grade decision. A higher assay does not license a smaller weigh-up by itself: the certificate basis, the overage decision and the finished-product test are what allow the label to declare a number. ## What to write into a purchase specification - “Gamma-aminobutyric acid, CAS 56-12-2, C4H9NO2.” - “Assay 99.0–101.0% by HPLC; the detection and the basis named in the method.” - “Identity by IR spectrum and HPLC retention; related substances limited.” - “Loss on drying ≤0.5%; pH 6.5–7.5 in a 1% solution.” - “Heavy metals Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg; the microbiological panel as listed.” - “Particle size ≥95% through 40 mesh, or the granule cut agreed in writing.” - “Route, origin, pack and destination market named on the specification.” The catalog grade is the material we supply. Two cases sit outside this page. If the brief is really for beta-alanine, GABA is not a substitute and the granule question does not arise: that is a different substance, with a different CAS number and a different label (the comparison is here). If the process needs a coarse granule, the 40 mesh powder is not the answer, and the change has to be specified and quoted rather than requested at the filling line. The product hub carries the catalog specification; the beta-alanine page covers the amino acid most often confused with this one; the glycine page shows a second small, freely soluble amino acid with its own grade logic; the methods library describes the identity tests; the quality page describes the release file. ### 02.1 GABA vs beta-alanine: structure, dose and the label URL: https://nutrition.rainwoodbio.com/products/amino-acids/gaba/grades/gaba-vs-beta-alanine/ Reviewed: 2026-11-19 GABA and beta-alanine are two different substances, not two grades of one. Gamma-aminobutyric acid is C4H9NO2, CAS 56-12-2; beta-alanine is C3H7NO2, CAS 107-95-9, one methylene shorter. Neither is the isomer of the other, and both are achiral, so neither carries a D or L prefix. The differences that matter to a buyer show up in the assay, the amount per serving and the name on the label. In one lineOne methylene separates GABA from beta-alanine, and that single carbon changes the CAS number, the assay, the amount per serving and the name on the label. ## One carbon apart: gamma against beta The names describe where the amino group sits. In GABA it is on the fourth carbon of a four-carbon acid, so the systematic name is 4-aminobutanoic acid and the letter gamma records that position. In beta-alanine it is on the third carbon of a three-carbon acid, so the systematic name is 3-aminopropanoic acid and the letter beta records that position. The pair differs by one CH2 group, which is why they are homologues rather than isomers. Both are non-proteinogenic: neither is built into proteins by the ribosome. Beta-alanine is a component of carnosine and of pantothenic acid, and GABA is an endogenous mammalian metabolite. Neither fact changes the specification, but both explain why the two materials appear in the same product categories and in the same catalogues. GABA and beta-alanine side by side | Property | GABA | Beta-alanine | Name as labelled | Gamma-aminobutyric acid | Beta-alanine | CAS number | 56-12-2 | 107-95-9 | Formula | C4H9NO2 | C3H7NO2 | Molecular weight | 103.12 | 89.09 | Systematic name | 4-aminobutanoic acid | 3-aminopropanoic acid | Stereochemistry | Achiral; no D or L form | Achiral; no D or L form | Appearance | White crystalline powder | White crystalline powder | Water solubility | Freely soluble; neutral solution | Freely soluble The table also shows why appearance and solubility cannot separate them: both are white, both dissolve freely, both give near-neutral solutions because both are zwitterions, and the one-carbon difference moves the isoelectric point only slightly. The separation has to come from the spectrum, the chromatogram or the elemental result. ## Two names, two label declarations On a US Supplement Facts panel the dietary ingredient is declared by name and amount. “Gamma-aminobutyric acid” and “Beta-alanine” are two different declarations, and “GABA” is an abbreviation, so writing the full name removes any doubt about which substance is declared. The same principle applies in the EU: the name on the pack has to be the name of the substance in the pack. A product called GABA that contains beta-alanine is not a blend with a different carrier; it is a different ingredient under the wrong name. If a formula genuinely contains both materials, both are declared, with an amount for each. The label decides which specification and which market file are needed, not the other way round. The declaration also fixes the assay basis: 500 mg of gamma-aminobutyric acid is calculated from that substance's assay and the fill weight, and a beta-alanine certificate cannot support the number at any assay. ## The amount per serving is not transferable GABA products commonly declare amounts in the tens to hundreds of milligrams per serving. Beta-alanine products commonly declare gram amounts, often split across servings. The gap is close to an order of magnitude, so swapping one for the other is not a small adjustment: the fill weight, the capsule count, the taste of the mix and the flow of the blend all change with it. Neither amount is a recommendation on this page. The declared amount is the brand's decision, taken with its regulatory team for the destination. The point here is narrower: a 500 mg capsule of GABA is not a 500 mg capsule of beta-alanine in any sense the label recognises, because the declared substance is different and the amount was chosen for a different material. The regulatory file is not transferable either: a change from one substance to the other is a new ingredient, with a new specification, a new label review and its own stability work, not a specification revision. ## Telling them apart in the laboratory Both molecules lack a strong ultraviolet chromophore, so an HPLC method has to derivatise the amine or use a detector that does not depend on absorbance. That is the first thing to check on a certificate: the method should name the reagent and the detection, and it should state a resolution requirement between the two analytes. A generic amino-acid method can put them close together, and “retention conforms” without a resolution figure proves less than it appears to. The elemental result is the simplest independent check. GABA is 13.58% nitrogen and 46.59% carbon, a carbon-to-nitrogen ratio of about 3.43 to 1. Beta-alanine is 15.72% nitrogen and 40.44% carbon, a ratio of about 2.57 to 1. Infrared spectra differ in the fingerprint region, and the two are readily distinguished by any modern library search. A non-specific titration of the amino group will not separate them: both have one carboxyl and one amino group, and a result calculated on the wrong molecular weight still looks like a plausible percentage. A blend can also be built to land inside the 99.0–101.0% range. That is why the identity evidence, not the assay number, is the test that decides which substance is in the drum. ## Where the confusion comes from The two names look alike in a catalogue, both are white freely soluble amino acids, and both are sold into sports and nutrition channels. Both are non-proteinogenic, which means neither has a familiar dietary reference point to anchor it, and both appear in blends. A purchase order written from memory can name one and quote the other without anyone noticing until the label is printed. A third name adds to the noise: the isomer of beta-alanine is L-alanine, which shares the formula C3H7NO2 but is chiral, while GABA is not an isomer of either. A fourth small amino acid, glycine, is also a white, freely soluble powder in the same blends (the glycine page covers its own specification). Four names and three formulas are enough to produce a substitution that no one intended. ## Which material the brief calls for Start from the label and the finished product, not from the list of powders on the shelf. If the label names gamma-aminobutyric acid, the specification names GABA, the certificate must show identity evidence for GABA, and the amount is calculated on C4H9NO2. If the label names beta-alanine, the order is a different purchase with a different specification (the beta-alanine page covers that material). A substitution in either direction needs written change control, a new specification, a new label check, a new stability assessment and a fresh look at the market file. The GABA product hub and the grades page carry the catalog specification and the grade questions. The HPLC method note describes the separation, and the quality page describes the release file that holds the identity evidence together. ### 03 GABA stability: moisture, heat and what the pack controls URL: https://nutrition.rainwoodbio.com/products/amino-acids/gaba/stability/ Reviewed: 2026-11-19 GABA is stable as a dry powder and much less predictable in a heated, acidic or sugar-containing matrix. The powder fails through moisture pickup, caking and browning; a solution fails through microbial growth, pH drift and cyclisation to pyrrolidin-2-one. Light is not the main driver here, which is one place where this amino acid differs from a pigment or a light-sensitive vitamin. In one lineGABA fails through water, heat and sugar rather than light, so the pack controls moisture and the matrix decides what a heated fill leaves behind. ## The powder: moisture, caking and colour The catalog sets loss on drying at ≤0.5%. That is a release gate, not a storage allowance. The powder is hygroscopic, so an opened pouch takes up moisture from the room: the loss on drying rises, the as-is assay falls, the powder cakes and its flow changes. A tight seal and a dry store are part of the specification in practice, even when they are not printed on the certificate. Caking is the visible symptom and browning is the chemical one. A white powder that turns cream or tan in the pack has usually met moisture, heat and a trace of reducing sugar at the same time. The colour shift is not an identity failure by itself, but it is a reason to re-assay and to look at the chromatogram rather than to shake the drum and ship it. Heat accelerates both moisture pickup and browning. A sealed pack at ambient warehouse temperature is usually fine; a hot loading bay, a car boot or a greenhouse is not. After cold storage, let the pack equilibrate before opening, so that condensation does not form on the powder. ## The solution: freely soluble, not automatically stable The material dissolves freely in water and a 1% solution sits at 6.5–7.5. That makes a clear drink or a stick pack easy to formulate, and it also makes the solution a growth medium. With no preservative and no chill chain, the microbial count sets the first limit on hold time, well before any chemical change is visible. The chemical risks in solution are heat, pH and sugar. Under heat at low pH, GABA can cyclise to pyrrolidin-2-one, a lactam that the assay may not see unless the method looks for it. The reaction is slow at ambient temperature and faster in a hot fill or a pasteurisation step, which is exactly where a beverage process puts the material. If the formula is acidic and heated, ask for the related-substance result in the matrix, not only on the powder. Amino acids also buffer. As the pH moves, the taste, the colour and the rate of the side reactions move with it, so the hold time has to be measured at the matrix pH rather than at the pH of a plain solution. ## What drives degradation Factors that move GABA during storage | Factor | What it does | Control | Moisture | Raises loss on drying; caking; dilutes the as-is assay | Sealed pouch; dry store; desiccant where needed | Heat | Accelerates browning and the lactam route in solution | Cool store; keep the heat load short | pH | Moves the cyclisation rate and the taste | Measure the hold time at the matrix pH | Reducing sugars | Maillard browning with the amino group | Choose a non-reducing filler; check the colour | Oxygen | Slow colour change at exposed surfaces | Low headspace; sealed pack | Light | Minor direct effect; heat from the light is worse | Opaque pack; keep out of direct sun | Microbiology | Growth in an unpreserved solution | Preservative, chill, or a validated short hold These factors are not independent. A warm, humid store with a partly opened pouch is worse than either condition alone, and an acidic drink in clear glass combines heat, light and pH. The useful stability question is not whether GABA is stable, but stable in which pack, in which matrix, at which condition and for how long. ## A protocol for the powder and for the matrix Long-term storage at 25 °C and 60% relative humidity, intermediate storage at 30 °C and 65%, and accelerated storage at 40 °C and 75% cover the warehouse and stress the pack. A light arm is worth keeping for a clear or translucent container even though light is not the primary driver, because the container, not the molecule, decides whether the arm matters. Test assay by HPLC, loss on drying, pH, appearance, related substances and microbiology at each point. For a stick pack or a beverage, repeat the work in the matrix at the process pH and heat load, and report the individual results rather than a pass statement. A powder result does not transfer to a drink: the water activity, the pH and the oxygen are different. Ask for the stability summary for the pack you will buy. A 25 kg drum and a 1 kg pouch have different headspace and different opening histories, and the data belongs to the pack. ## The formula decides which failure mode matters A capsule has low water activity, but the shell and the filler can still carry moisture, and a lactose filler is a reducing sugar that can brown at the interface. A directly compressed tablet brings lubricant and compression heat; a wet-granulated one brings water and a drying step. A stick pack depends on the foil and the seal, and a pinhole is a failure that the powder test will not show. A gummy and a beverage are the harder matrices. Both bring water, and the gummy also brings heat and a reducing-sugar syrup. The ingredient's bulk stability is the starting point, not the answer, and the formulator decides whether an overage is needed. That is a label and stability decision; it does not repair a pack that lets moisture in. ## How the retest period is set We do not publish one shelf-life number for GABA, because the pack and the storage condition set it. The assigned retest period belongs on the specification and is supported by the stability file for that pack. A number without a pack, a condition and a test panel is not a shelf life; it is a claim. After the retest period, re-assay the retained sample before extending use. Do not extend by assumption, and do not carry a bulk figure across to a repacked container. The product hub lists the standard packs; the COA page covers the release tests; the grades page covers particle size and route; the MOQ page covers pack and lead time; the methods library describes the assay, and the quality page describes the release workflow. ### 04 GABA orders: MOQ, packs and lead time URL: https://nutrition.rainwoodbio.com/products/amino-acids/gaba/moq/ Reviewed: 2026-11-19 The MOQ for GABA is 1 kg, supplied in a 1 kg foil pouch; the bulk pack is a 25 kg fiber drum. Lead time is 1–7 days for the standard pack. A firm quotation needs six things: the substance and CAS number, the specification with its assay method and basis, the quantity and pack, the destination and Incoterm, the documents, and the intended use and market. In one lineOne kilogram is the trial unit: enough for a bench batch, a retained sample and an independent identity test, and it ships as a parcel. ## Why the minimum is 1 kg A 1 kg pack covers a bench-scale trial, a retained sample and an independent identity test, which is the work a new source has to survive before a production order. It also travels as a parcel rather than a pallet, so a formulator can have material before the production plan is fixed. The pack carries a lot code of its own; it is a commercial unit, not a scoop from a drum. Below 1 kg, the material is normally split from a larger lot and repacked. That adds handling, loses the original pack identity and makes traceability harder, without changing the chemistry. The 25 kg drum is the bulk unit: it reduces handling per kilogram, but it commits inventory and a longer storage period, which matters for a hygroscopic powder that has to stay sealed. The minimum is a pack decision, not a volume incentive. A buyer who needs 200 g for a bench trial should ask for a documented split from a named lot rather than assume a small pack exists. ## Packs and formats Standard GABA packs | Pack | Net weight | Typical use | Handling note | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Particle-size line changes The catalog form is a 40 mesh powder: ≥95% through 40 mesh. Granulation is a different specification, not a packing choice. If the dosage form needs a freer-flowing granule, say so before the quotation, because the change moves the particle-size line and may move the lead time. The inner liner is part of the moisture barrier on the drum; once it has been opened, the remainder needs a container that closes, not a folded liner. ## Lead time and dispatch The standard pack is quoted at 1–7 days from order confirmation. That window covers picking, document preparation and dispatch; it does not include the shipping transit, customs clearance or the customer's own quality release. A custom granulation, a non-standard pack or a destination document set adds time, and the quotation should state it as a separate line. Ask for the dispatch date, not only the lead time. A 25 kg drum may travel on a pallet and a 1 kg pouch as a parcel; the Incoterm decides who books the freight and who clears the entry. The documents should travel with the lot, not follow it. ## What a quotation needs Six items make a quotation firm enough to compare: - Substance. Gamma-aminobutyric acid, CAS 56-12-2, free amino acid, not a salt or a blend. - Specification. Assay with its HPLC detection and basis, loss on drying, pH, heavy metals, microbiology and particle size. - Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated variant. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, specification, SDS, and any statement the importer needs. - Intended use and market. Food, supplement or another use, and the market where the finished product will be sold. A quotation that leaves out the assay method, the basis or the market is incomplete, because those three decide whether the same powder suits the destination. Commercial terms are not printed on this page; they are stated on the quotation. ## The sample is a lot, not a demonstration The 1 kg pack is the qualification sample. Test identity, assay, loss on drying and microbiology before scaling, and keep a retained sample from the same pack. The lot code on the sample, on the certificate and on the quotation should match. A sample that cannot be traced to a lot is a demonstration, not a qualification. If the project needs less than a kilogram for a bench trial, discuss it before ordering. A split from a bulk lot is a repack with its own traceability, and it should be documented as a split. Do not assume that a bench sample and the production drum will come from the same lot, and do not write the sample's assay into the production specification without checking the lot that arrives. ## Terms to settle before the first order The quotation sets the commercial terms, the Incoterm, the pack, the lead time and the documents. The quality terms belong beside them: the specification revision, the certificate per lot, the retained sample, the retest period and the change-control route. A quality agreement is worth having before the first production order rather than after the first dispute. Returns and replacements follow the quotation and the quality agreement. A lot that fails the agreed specification should be handled through the retained sample and a joint re-test, not through a photograph of the powder. Agree in advance which laboratory both sides accept and how a referee result is handled. The product hub carries the catalog specification; the COA page lists the release tests; the compliance page covers the market file; the identity page covers the tests behind a substitution claim; the glossary defines the order terms; the logistics page covers shipping and documents. ### 05 The regulatory file for GABA: route, limits and label URL: https://nutrition.rainwoodbio.com/products/amino-acids/gaba/compliance/ Reviewed: 2026-11-19 GABA is supplied as gamma-aminobutyric acid, CAS 56-12-2. The catalog specification and the lot certificate describe the material; the regulatory file is built around the destination, the finished-product route and the label. The buyer's regulatory team confirms that route. This page lists the framework, the limits and the documents that belong in the review, so the specification and the commercial pack can be checked together. In one lineThe powder is the same in every market; the route, the label name and the limits are not, so the file is built for the destination. ## What the file has to answer A complete file answers four practical questions. What is the material, and which specification revision is being bought? Which lot is being released, and what does its certificate report? Which limits and label rules apply to the finished product in the destination market? And what happens to the file if the source, the route or the pack changes? The certificate answers the lot question, the technical data sheet answers the specification question, and the safety data sheet answers the handling question. None of them answers the route question on its own. That answer depends on the destination, the dose and the finished-product category, and it is the buyer's regulatory team that confirms it against the current text. The file should also carry the allergen and GMO statements, the origin record, the residual-solvent statement and any customer-specific declaration. Where a statement is missing, the gap should be named before the order rather than discovered at the port. A document list with version numbers is more useful than a folder of undated files. ## European Union Several instruments apply at once. General food law sets the safety obligation; the food-supplements directive sets the categories and the labelling of supplements; the labelling regulation governs the name, the ingredient list and the quantitative declaration; the contaminants regulation sets maximum levels for lead, cadmium, mercury and other substances; and the novel-food regulation governs whether an ingredient needs an authorisation because it was not used for food to a significant degree before 15 May 1997. Which of those routes applies to a GABA lot is a question for the buyer's regulatory team, and the answer can depend on the member state and on the finished product. This page does not settle it and does not claim a status. The supplier's part is the specification, the lot data and the traceability; the buyer's part is the route and the label. As of this review the consolidated texts are the reference, and the file should record which version was checked. ## United States Amino acids are one of the statutory categories of dietary ingredient, so the supplement route is the usual starting point for a GABA product in the United States. That route brings the current good-manufacturing-practice rule for supplements, the Supplement Facts panel with its declared amount per serving, and the ingredient-identity and record-keeping duties that sit behind the panel. Two questions are often left until late. The first is whether the ingredient needs a notification as a new dietary ingredient for the intended use; the second is whether the wording on the pack is a structure-function claim, with the notification that the rule requires. The buyer's regulatory team confirms both. The supplier can support them with the specification, the certificate and the identity evidence, and that is the limit of the supplier's role. ## Great Britain and Northern Ireland Great Britain and Northern Ireland are checked separately. The GB file uses the current GB register and GB labelling rules, while Northern Ireland follows the EU framework. The buyer's team confirms which of the two applies to the destination and keeps the evidence with the order, because the same pack can be compliant in one and not in the other. ## Contaminants and the finished-product calculation The contaminant panel is a finished-product calculation, not only a drum result. The table below is the usual starting point for a supplement file; the destination text and the daily dose decide the final limit. Contaminant limits to confirm for the finished product | Contaminant | Typical supplement reference | What the file should show | Lead (Pb) | 3.0 mg/kg | Lot result, method, limit and the finished-product calculation | Cadmium (Cd) | 1.0 mg/kg | Lot result and any category exception that applies | Mercury (Hg) | 0.10 mg/kg | Lot result and method | Arsenic (As) | Agreed limit | The agreed figure and the method, stated on the certificate The dose makes the arithmetic concrete. A lot at 0.5 mg/kg lead, used at 500 mg per serving, contributes 0.25 µg of lead per serving; the same lot used at 5 g per serving contributes 2.5 µg. The specification is written per kilogram of powder, but the exposure is written per serving, and the two have to be joined in the file. ## Label and claims No disease-related claim is made for this material, and this page makes no health claim of any kind. The label names the substance and the amount in the form the destination requires; any structure-function or health wording is reviewed by the brand's regulatory team against the rules of the market, and the review is recorded with the artwork rather than with the certificate. The certificate does not approve a claim, and a claim does not change the specification. The label name matters here for a second reason: the substance named on the pack has to be the substance in the drum. A product named as GABA that contains a different amino acid fails at the identity step before any claim is considered. ## The document set - Certificate of analysis for the lot, with method, limit and result for each line. - Technical data sheet carrying the specification revision. - Safety data sheet for handling and transport. - Allergen statement, GMO statement and origin record. - Residual-solvent statement and, where relevant, a non-irradiation statement. - Change-control record for the source, the route and the pack. Keep the version numbers together. A certificate that cites one specification revision, a data sheet that carries another and a quotation that names a third is a file that will fail an audit even when the powder is correct. ## Checklist before the first order - The substance, the CAS number and the specification revision are named. - The certificate, data sheet and safety data sheet are on file with dates. - The contaminant results are converted to the finished-product dose. - The label name and any claim have been reviewed for the destination. - The GB and EU routes have been checked separately where both apply. - Source, route and pack are under change control. The product page carries the catalog specification; the COA page explains the lot certificate; the identity page covers the analytical evidence; the MOQ page covers the order. The quality page describes the release file, and the methods library describes the tests behind the numbers. ### 06 How we prove a GABA lot is GABA URL: https://nutrition.rainwoodbio.com/products/amino-acids/gaba/identity/ Reviewed: 2026-11-19 A GABA lot is identified by four agreeing measurements, beyond the paperwork that names it: an infrared spectrum that matches the reference, an HPLC retention that matches under a method which resolves the neighbouring amino acids, an assay and loss on drying that close the mass balance, and an elemental composition consistent with C4H9NO2. GABA has no chiral centre, so a specific rotation cannot be part of that set. A certificate that offers a rotation figure for this material is offering a test that does not apply. In one lineGABA is achiral, so identity rests on the spectrum, the chromatogram and the elemental composition, not on a rotation figure. ## The identity layers A certificate can name the right material and still fail to prove it. The layers below are separate questions, and each needs its own evidence. A supplier who answers only the first has described the paperwork, not the powder. Layers of GABA identity | Layer | Question | Test | What it proves | Document | Is the substance named? | Name, CAS number and formula | Paperwork only | Spectrum | Is the molecule GABA? | IR against a reference spectrum | The compound, not its purity | Chromatogram | Are the neighbours absent? | HPLC retention, resolution and related substances | The compound and its nearest homologues | Mass balance | Is it wet or diluted? | Assay, loss on drying and related substances | Consistency of the numbers | Elemental | Is the carbon count right? | Carbon, hydrogen and nitrogen analysis | The one-carbon difference from beta-alanine The third layer is the one a routine certificate usually leaves thin. “Retention conforms” without a resolution requirement tells the reader that a peak came out at the expected time; it does not say that beta-alanine, alanine or glycine would have come out somewhere else. ## The ratio that replaces rotation A rotation is a measure of optical activity, and it needs a stereocentre. GABA has none: the carbon chain is not substituted in a way that creates one, so the molecule is achiral and a polarimeter has nothing to measure. A rotation figure on a GABA certificate is therefore not a weak identity test; it is a test of a different property, and its presence suggests the template came from another product. The useful ratio is the elemental one. GABA is 46.59% carbon, 8.80% hydrogen, 13.58% nitrogen and 31.03% oxygen by mass, which is a carbon-to-nitrogen ratio of about 3.43 to 1, or four carbon atoms to one nitrogen. Beta-alanine, one CH2 shorter, is 40.44% carbon and 15.72% nitrogen, a ratio of about 2.57 to 1, or three carbon atoms to one nitrogen. Elemental analysis separates the two materials without an HPLC method at all. A nitrogen-only result can be converted with the theoretical factor for the named substance: 103.12 ÷ 14.01 = 7.36 for GABA. A powder that is really beta-alanine reads about 15.7% nitrogen and calculates to 115.7% apparent GABA on that factor, which is an impossible assay and a clear signal. An honest nitrogen result of 13.4% calculates to about 99% GABA, which is consistent with the specification. The ratio also closes the mass balance: assay plus loss on drying plus related substances should approach 100%, and a total well above it points to a dilution or a second nitrogen source. ## X-ray diffraction and the solid state X-ray diffraction answers a different question: is the solid crystalline, and does its pattern match a reference? The literature reports more than one crystal form of GABA, and the catalog on this page does not name a polymorph. That makes XRD a comparison tool rather than a release test: it can compare two lots or two sources, and it can show that a powder is a crystalline material rather than an amorphous carrier, but a “conforms” statement without the reference pattern adds little. XRD is not a purity assay and does not measure moisture. Ask for the reference pattern, the sample preparation and the detection limit before reading a match statement. When a solid-state question is real, XRD plus the IR spectrum plus the elemental result is a stronger file than any one of them. ## What adulteration looks like Substitutions for GABA and the signals they leave | Adulterant | Why it appears | Signal | Test | Beta-alanine | One carbon shorter, same white powder | Nitrogen 15.7% against 13.6%; close retention time | CHN analysis, HPLC resolution, IR | Glycine | Small and freely soluble | Nitrogen near 18.7%; an extra early peak | CHN analysis, HPLC | L-alanine | Isomer of beta-alanine, sold in the same channel | Nitrogen 15.7%; a peak that differs from GABA | CHN analysis, HPLC | Sodium chloride | Bulking and flow | No nitrogen; high ash and chloride; pH shift | Chloride, ash, conductivity | Water | Humidity in an opened pack | Loss on drying high; as-is assay low | Loss on drying | Maltodextrin or a carrier | Dilution to a lower assay | Assay low; loss on drying high; carbohydrate bands in the IR | Assay, IR, loss on drying The catalog carries no chloride and no residue-on-ignition line, so a salt cut is not visible on the routine certificate. That is the gap to close when a source is new: ask for ash and chloride even though they are not release parameters here. Colour is the weakest signal of all, because a white powder has no colour signature to compare. ## What the identity section of a specification should say - “Gamma-aminobutyric acid, CAS 56-12-2, C4H9NO2, molecular weight 103.12.” - “Identification by IR spectrum against the reference and by HPLC retention under a method that resolves beta-alanine and alanine.” - “Assay 99.0–101.0% by HPLC, with the detection named and the basis stated.” - “Loss on drying ≤0.5%; pH 6.5–7.5 in a 1% solution.” - “Related substances limited by the agreed method; no beta-alanine above the stated limit.” - “Elemental carbon and nitrogen on request, for source qualification.” ## Five questions for the supplier - Can you send the IR spectrum and the HPLC chromatogram for this lot, not only the assay figure? - Does the HPLC method state its resolution between GABA and beta-alanine, and what was the result? - Is the assay on the dried basis or as-is, and what is the loss on drying for this lot? - What are the carbon and nitrogen figures, and which method produced them? - If the lot is disputed, will you accept a joint re-test on the retained sample? Five direct answers amount to an identity file; a single percentage does not. The product hub carries the catalog specification; the COA page shows where each figure sits on the certificate; the grades page covers particle size and route; the level-four comparison covers the substitution in detail; the infrared method note explains the spectrum, and the quality page describes the release file. ### 01 What the COA for L-alanine actually contains URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-alanine/coa/ Reviewed: 2026-11-19 The certificate for an L-alanine lot reports appearance, identity by IR and HPLC, assay by HPLC on the dried basis, specific rotation, loss on drying, pH, heavy metals, microbiology and particle size. The assay says how much alanine is present; the rotation says it is the L-enantiomer. One figure without the other does not identify the material. In one lineThe assay and the rotation are one argument: the HPLC figure shows how much alanine the lot contains, and the specific rotation shows that it is the L-form. ## The certificate as a test report A certificate is auditable when each line carries the parameter, the method and the release limit the lot was judged against. A row that says only “conforms” records a conclusion without the evidence behind it. The molecular half is IR and HPLC against a reference; the stereochemical half is specific rotation. Alanine has one chiral centre, so a lot can be the right molecule and the wrong enantiomer. The limits in the table are the specification; the batch COA confirms a particular pack. Identity, assay, rotation and limits · L-alanine | Parameter | Method | Release limit | Appearance | Visual | White crystalline powder | Identification | IR and HPLC against a reference | Conforms | Assay | HPLC, dried basis | 98.5–101.5% | Specific rotation | Polarimetry, dry basis | +14.0° to +15.0° | Loss on drying | Gravimetric | ≤0.5% | pH (1% solution) | Potentiometric | 5.0–7.0 | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh ## Dried basis, the HPLC method and the rotation Alanine has no strong ultraviolet chromophore, so the HPLC method depends on the detection mode named in the report. Pre-column derivatisation with a fluorophore, post-column reaction or a refractive-index detector are all used for amino acids; the certificate should name the column, the mobile phase and the detector settings. The assay is reported on the dried basis: the laboratory measures the powder as received and corrects for the loss on drying. The correction is small at a 0.5% limit, but not zero. A lot at 98.2% as-is with 0.4% loss on drying calculates to 98.59% dried and passes the 98.5–101.5% window. The same 98.2% reported as-is would fail it. A lot at 98.5% as-is with the same moisture calculates to 98.90% dried. The basis is what separates the two readings. The rotation is also reported on the dried basis, and it needs its conditions: solvent, concentration, temperature, wavelength and path length. The catalogue window is +14.0° to +15.0°. A reading of +14.6° means one thing at 20 °C in the declared solvent and something else when the conditions are missing. The pH of a 1% solution, 5.0–7.0, is a supporting check: it is not specific to alanine, but a figure outside the window points to a different salt or residual acid. The appearance line is equally nonspecific. ## Release limit versus batch result The release limit is the acceptance boundary for the lot; the batch result is what the laboratory measured. Both belong on the page, in separate columns, with the method and the basis beside them. A result column filled with the specification range is not a result; it is a copy of the gate. What the result column should contain · L-alanine | Parameter | Release limit | Result line | Assay | 98.5–101.5% dried | A measured percentage, with the method and the basis named | Specific rotation | +14.0° to +15.0° dry | A measured angle with solvent, concentration and temperature | Loss on drying | ≤0.5% | A measured percentage | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot | Particle size | ≥95% through 40 mesh | The measured percentage through the sieve “Passes specification” is a conclusion the reader should reach from the numbers. For heavy metals that means a figure per element, not a single total. For microbiology it means a count plus an absence statement. For rotation it means the measured angle and the conditions; a range in the result cell is a specification in disguise. ## What moves between batches The recovery and crystallisation steps move colour, pH and the trace-metal profile. Drying moves the loss on drying. Milling and sieving move the particle-size result without any change in the chemistry, so a new mill can produce a new 40 mesh figure while the assay and the rotation stay put. Rotation is the line that should not drift. A gradual fall across lots points to a process change: a hot alkaline hold, a long residence time at high pH or a different resolution step. Racemisation is a chemistry signal, not a rounding difference, and a trend toward the lower edge deserves the chromatogram and the chiral method, not only a new certificate. Particle size is a finishing specification, and colour is the least quantitative line. A slightly off-white batch can reflect the drying history while every chemistry line passes. The lot code on the certificate should match the pouch, the drum and the retained sample; a certificate that cannot be tied to a pack describes a material, not a delivery. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a rotation result near an edge, a form or purity claim the certificate does not prove, or a disputed lot. The useful panel is IR, HPLC assay, specific rotation, loss on drying, ICP-MS for the heavy-metal panel and microbiology. Add chiral HPLC for D-alanine when enantiomeric purity matters, and XRD when the solid form is in question. Ask the laboratory to report its limit of quantification for each screen. A “D-alanine not detected” line without a limit describes the method, not the sample. Give the referee the retained sample, the supplier's certificate and the specification, and ask for the test that separates the forms. Chain of custody matters as much as the method: the sample tested should be the retained sample, the report should identify the lot, and the laboratory should state the assay basis. Those three details make an outside result usable in a supplier qualification. ## What to compare between suppliers Put six lines side by side: name and CAS number; assay result with its basis and method; specific rotation with its conditions; loss on drying and pH; heavy metals and microbiology; pack size and lot code. Two quotations that agree on assay but differ on rotation or basis are not describing the same powder. The second layer is traceability: who made the lot, which process was used, and which drying and milling steps were applied. The catalogue specification is on the L-alanine product page; the tests that separate it from other amino acids are on the identity page; the particle-size choice is on the grades page; the separation is described in the methods library; the release workflow is on the quality page. ### 02 L-alanine grades: particle size, flow and the L-form URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-alanine/grades/ Reviewed: 2026-11-19 L-alanine is sold as the L-enantiomer in a crystalline powder, so the commercial grade decision is usually about particle size and flow rather than a different molecule. The catalogue grade is a 40 mesh powder; a granulated grade is quoted on request. DL-alanine and beta-alanine are separate materials with their own CAS numbers, not grades of L-alanine. In one lineThe grade decision for L-alanine is physical first: the molecule stays the same while the particle size, the flow and the dust change with the pack and the dosage form. ## Why L-alanine has more than one grade An amino acid can differ between suppliers in three ways: the enantiomer, the assay window and the physical form. The name L-alanine fixes the first, and the catalogue window of 98.5–101.5% fixes the second. What remains is the powder itself — how fine it is, how it flows, how much dust it makes and how it behaves in the customer's process. That is why “L-alanine powder” is an incomplete purchase description. The specification has to say which mesh, whether the material is granulated, and which pack it arrives in. A change from 40 mesh to another mesh is a change in the specification even though the certificate's chemistry lines stay the same. It also helps to separate a grade from a different material. DL-alanine is the racemic mixture and has its own CAS number and rotation. Beta-alanine is a constitutional isomer with the same formula but a different structure. Neither is a grade of L-alanine, and neither should be substituted without a written change and a label review. ## The forms side by side L-alanine forms and related materials | Form | Description | CAS | Specific rotation | Typical use | L-alanine, 40 mesh | Catalogue powder; ≥95% through 40 mesh | 56-41-7 | +14.0° to +15.0° | Capsules, tablets, blends | L-alanine, granulated | Granulated on request | 56-41-7 | +14.0° to +15.0° | High-speed filling, low dust | DL-alanine | Racemic mixture; separate purchase | 302-72-7 | About 0° | Not a substitute for the L-form | Beta-alanine | Constitutional isomer; separate material | 107-95-9 | None; achiral | Has its own specification and label The first two rows are the same molecule in different physical forms. The last two are different materials, and the table is arranged to make that distinction hard to miss. A quotation that lists “alanine” without the form leaves the buyer to guess which row is being offered. ## Particle size, flow and the powder in the room The 40 mesh line means at least 95% of the powder passes a 40 mesh sieve. The remaining fraction may be coarser, and that is allowed by the specification. Milling shifts the distribution finer: the powder disperses and mixes more quickly, but it also makes more dust and can cling to the inside of a blender or a pouch. A granulated grade goes the other way. The particles are built up rather than milled down, so the powder flows more freely and generates less dust. Granulation can change the dissolution rate and the bulk density, which matters when a capsule is filled by volume or a stick pack is filled by auger. Those are process consequences, not chemistry changes, and they belong in the specification rather than in a side conversation. L-alanine is freely soluble in water and gives a 1% solution at pH 5.0–7.0. It is mildly sweet with a slight umami note, which is one reason it appears in flavour systems as well as in capsules. Fineness changes how quickly that taste is released in the mouth, but it does not change the taste itself. Moisture is the storage variable: the loss-on-drying limit is ≤0.5%, and a powder that cakes in the drum has usually picked up water rather than changed its chemistry. ## What the dosage form asks of the grade A capsule or a tablet needs flow and a consistent fill weight. A 40 mesh powder is the usual starting point, and a granulated grade is worth asking about when the filling line runs fast or the powder bridges in the hopper. For direct compression, the particle-size distribution and the bulk density affect the die fill; the formulator should see the particle-size report, not only the certificate's chemistry lines. A powder blend or a stick pack is less forgiving about segregation. A fine fraction can separate from a coarser one during transport, so the particle-size distribution should be narrow enough for the blend to stay uniform. The same fineness that helps dispersion can make the powder cling to the pouch and leave a residue that the consumer sees. A gummy or a chew brings water and heat into contact with the amino acid. L-alanine is not the fragile part of that formula, but the reducing sugars are: browning is a matrix question, and the grade cannot solve it. A beverage uses the freely soluble powder directly; the taste contribution is the reason to choose L-alanine over a neutral amino acid, and the level should be set by a taste panel rather than by the particle size. ## What to write into the specification - “L-Alanine, CAS 56-41-7, C3H7NO2, white crystalline powder.” - “Assay 98.5–101.5% by HPLC on the dried basis; loss on drying ≤0.5%.” - “Identification by IR and HPLC against a reference; specific rotation +14.0° to +15.0° on the dry basis, with the measurement conditions stated.” - “pH 5.0–7.0 in a 1% solution.” - “Particle size ≥95% through 40 mesh, or the particle-size line agreed for a granulated grade.” - “Heavy metals and microbiology as listed; pack, lot code and destination market named on the order.” The specification should name the grade in the same words as the quotation. If the order says 40 mesh and the certificate reports a granulated powder, the lot may be perfectly good material and still be the wrong purchase. ## When another form is the wrong choice Do not accept DL-alanine as “the same amino acid” when the specification calls for the L-form. The racemate has a different rotation, a different crystal pattern and a different label name, and the assay may look normal because it counts both enantiomers. The identity page sets out the tests that separate them. Do not use a finer powder to fix a flow problem that belongs to the filling line, and do not use a granulated grade to fix a taste problem that belongs to the formula. The grade changes the powder's behaviour, not the molecule's. When the intended material is beta-alanine, the comparison belongs on the L-alanine vs beta-alanine page, because the two are different molecules with different labels. The catalogue specification is on the L-alanine product page. The release tests are on the COA page, the pack and lead time on the MOQ page, and the release workflow on the quality page. ### 02.1 L-alanine vs beta-alanine: two isomers, two labels URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-alanine/grades/l-alanine-vs-beta-alanine/ Reviewed: 2026-11-19 L-alanine and beta-alanine are constitutional isomers: both have the formula C3H7NO2 and a molecular weight of 89.09, but the amino group sits on the alpha carbon in L-alanine and on the beta carbon in beta-alanine. L-alanine is chiral and has a specific rotation of +14.0° to +15.0°; beta-alanine has no stereocentre and no optical rotation. In one lineSame formula, same mass, different molecule: the amino group sits on a different carbon, so L-alanine is chiral, beta-alanine is not, and the label has to name which one is in the pack. ## Two isomers, one formula An amino acid is named by the position of its amino group relative to the carboxyl group. In L-alanine the amino group is on the carbon next to the carboxyl, the alpha carbon; the molecule is (S)-2-aminopropanoic acid. In beta-alanine the amino group is one carbon further away, on the beta carbon; the molecule is 3-aminopropanoic acid. Both are three-carbon amino acids and white crystalline powders. The structural difference is small enough to be easy to miss on a certificate and large enough to change the identity, the taste and the label. The table collects the facts that separate them; the sections below take each one in turn. L-alanine and beta-alanine side by side | Property | L-alanine | Beta-alanine | Chemical name | (2S)-2-aminopropanoic acid | 3-aminopropanoic acid | CAS number | 56-41-7 | 107-95-9 | Formula | C3H7NO2 | C3H7NO2 | Molecular weight | 89.09 | 89.09 | Amino group | Alpha carbon | Beta carbon | Chirality | One stereocentre; L-form is (S) | None | Specific rotation | +14.0° to +15.0° (dry basis) | None; achiral ## The L is a stereochemical claim L-alanine has four different groups on its alpha carbon, so it is chiral. The L-form is the (S) configuration; its mirror image, D-alanine, is (R). An equal mixture is DL-alanine, the racemate, which reads close to zero. Beta-alanine has no such centre: its alpha carbon carries two identical hydrogens, so the molecule is superimposable on its mirror image and cannot be L or D. This is the point where a generic “alanine” description breaks down. L-alanine, D-alanine, DL-alanine and beta-alanine are four different materials with different CAS numbers and different labels. The first three are stereochemical variants of one constitution; beta-alanine is a different constitution. It is not an enantiomer of L-alanine. The rotation catches the stereochemical variants but not the constitutional one on its own. A zero reading is consistent with beta-alanine and with DL-alanine, so the rotation has to be read beside IR, HPLC retention or NMR. Conversely, a rotation inside the L-alanine window shows that the material is predominantly L, but it does not show that the peak on the HPLC is alanine rather than another chiral amino acid. The two questions need two tests. ## Why the same mass defeats a mass-based assay Both molecules have a molecular weight of 89.09, so any method that measures mass, nitrogen content or amino groups reports them together. A perchloric acid titration in glacial acetic acid, a Kjeldahl nitrogen figure or a simple weigh-out cannot tell L-alanine from beta-alanine. An assay that reads 99% by titration is consistent with either molecule, and with a blend of the two. The separation has to come from chromatography or spectroscopy. HPLC retention separates the two constitutions when the method is selective; IR gives different spectra because the functional-group environments differ; NMR shows the CH3 and CH environments of L-alanine apart from the two CH2 groups of beta-alanine. A method should be challenged with a beta-alanine standard and the resolution reported, not assumed from a single peak at the expected time. The catalogue assay for L-alanine is by HPLC. Ask for the chromatogram, the column and the retention of a beta-alanine standard. If the method has not been shown to separate the two, the assay percentage is a measure of total amino acid rather than of L-alanine. A spiking experiment — adding a known amount of beta-alanine to a sample and showing two peaks — is the practical evidence that the method can find a substitution. ## Taste and the flavoured mix The two isomers do not taste the same. L-alanine is mildly sweet with a slight umami note; beta-alanine is usually described as neutral or only faintly sweet. In a capsule the difference is easy to ignore. In a stick pack, a flavoured powder or a beverage it is not, because the amino acid is a visible part of the taste and the mouthfeel. Swapping one for the other at the same milligram weight changes the flavour even though the molecular weight is identical. That is the practical trap: a formulator who regards the two as interchangeable because the mass matches will notice the change in the sensory panel, not in the assay. A taste panel should be run on the actual isomer, and the result is not an identity test. Taste is also a poor identity signal: glycine is sweet as well, and a sweet white powder could be glycine, L-alanine or a blend. The glycine page makes the same point: taste is a formulation property, and identity comes from the spectrum and the rotation. ## The label follows the identity The label has to name the material that is in the pack. In the European Union the ingredient list uses the name of the ingredient as sold; “alanine” alone does not distinguish L-alanine from beta-alanine or from the racemate. In the United States the Supplement Facts panel names the dietary ingredient, and “L-Alanine” and “Beta-Alanine” are different declarations. The specification and the certificate should carry the same name and CAS number as the label. There is no conversion factor between these two, because the molecular weight is the same. That is the opposite of a salt-versus-free-acid question, where the mass changes with the form. Here the mass is identical and the molecule is not, so the risk is substitution rather than arithmetic. A buyer who checks only the assay and the weight has checked nothing that separates them. For that reason a change from one to the other is a change of ingredient, not a change of grade. It needs a new specification, a new certificate, a label review and the destination market's file. They may share a catalogue category, but they are separate purchase items. ## What to write into the specification - “L-Alanine, CAS 56-41-7, (S)-2-aminopropanoic acid, C3H7NO2.” - “Assay 98.5–101.5% by HPLC on the dried basis, with the method shown to separate beta-alanine.” - “Specific rotation +14.0° to +15.0° on the dry basis, with solvent, concentration and temperature stated.” - “Identification by IR and HPLC retention; D-alanine by chiral HPLC on request.” - “Loss on drying ≤0.5%; pH 5.0–7.0 in a 1% solution; particle size ≥95% through 40 mesh.” - “For a beta-alanine purchase, CAS 107-95-9 and the beta-alanine specification, with its own certificate and label.” The L-alanine product page carries the L-form specification; the beta-alanine page is the separate material; the COA page shows how the assay and rotation are reported; the identity page sets out the tests; the methods library describes the chromatography; the quality page covers the release workflow. ### 03 L-alanine is stable dry; moisture, heat and the matrix decide the rest URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-alanine/stability/ Reviewed: 2026-11-19 L-alanine is a crystalline amino acid that keeps well in a sealed, dry pack at ambient temperature. The powder is not the fragile part of the file: moisture pickup, caking and, in a finished mix, browning with reducing sugars are the practical failure modes. In solution, microbial growth and an unvalidated hold time are the larger risks. In one lineL-alanine is stable as a dry solid; the shelf life is decided by the seal, the moisture and the matrix, not by the amino acid alone. ## The powder: moisture, caking and colour The catalogue limit for loss on drying is ≤0.5%, and that figure is a release gate rather than a storage allowance. A powder released at 0.4% has very little room left. Once a foil pouch is opened, the powder can pick up moisture from the air; the loss on drying rises, the as-is assay falls, and the powder may cake in the bag or the drum. Caking is the visible sign, but it is not the only one. A crystalline solid can hold surface water without looking different, and the dried-basis assay will still read correctly while the as-is material has lost value. The practical control is the pack: keep the liner closed, reseal the pouch properly, and keep the drum off a damp floor. Temperature matters less for the dry solid than for the pack. Ambient warehouse conditions are normally acceptable for a sealed pouch or drum; a hot loading bay or a car boot is not. If the pack has been stored cold, let it equilibrate before opening so that condensation does not form on the powder. Light is not a major route for L-alanine, but an opaque or foil pack is still the sensible default. Colour is a weak but useful signal. The catalogue describes a white crystalline powder, and a batch that turns noticeably yellow or brown has usually been exposed to heat and moisture, or has picked up a reducing sugar in a blend. The assay and the rotation are the measurements; the appearance is the prompt to look at them. ## The solution: microbial growth and the matrix L-alanine is freely soluble in water and gives a 1% solution at pH 5.0–7.0. A clear solution is not automatically stable. The amino acid is a nutrient for microorganisms, and an aqueous hold at ambient temperature is a microbial risk unless the formula is preserved, filtered or held cold. The hold time should be validated for the actual matrix, not borrowed from another product. Heat and pH act on the molecule as well as on the microbes. A neutral solution is comfortable for the amino acid; a strong alkaline hold combined with heat is the condition to avoid, because it can racemise the L-form and move the rotation. A pasteurised or hot-filled beverage adds a heat load that the powder never sees, and the rotation should be checked after the process when the label claims the L-form. Reducing sugars are the other solution risk. Alanine has a free amino group and participates in the Maillard reaction with reducing sugars, especially under heat. The result is browning, a change in taste and a loss of the ingredient as the reaction proceeds. A beverage or a syrup with both L-alanine and a reducing sugar needs a browning check, not only an assay. ## What drives change during storage Factors that move L-alanine during storage | Factor | What it does | Control | Moisture | Caking; loss on drying rises; the as-is assay falls | Sealed pouch or lined drum; dry store | Heat | Accelerates browning in mixes and racemisation in alkaline solution | Cool process; validated hold time | pH | Neutral solutions are comfortable; strong alkali plus heat can racemise the L-form | Keep the matrix near pH 5–7; avoid alkaline holds | Reducing sugars | Maillard browning in gummies, syrups and flavoured powders | Reduce free sugar; control water activity | Microorganisms | Growth in aqueous solution | Preservative, filtration or cold hold | Light | No strong sensitivity specified for the solid | Opaque or foil pack as normal practice These factors interact. A warm, humid store is worse than either condition alone, and a sweetened beverage at neutral pH combines microbial risk with browning. The useful stability question is not “is L-alanine stable?” but “stable in which pack, at which condition, for how long?” ## A stability protocol for the ingredient A useful protocol states the pack, the storage condition, the time points and the tests. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% relative humidity cover the warehouse; accelerated storage at 40 °C/75% relative humidity stresses the pack. A photostability arm is optional for the solid and more relevant to a clear liquid. Test assay, loss on drying, specific rotation, appearance, pH and microbiology at each point. The rotation is the line that catches racemisation, and it should be run under the same conditions as the release test so the results are comparable. For a beverage or a stick pack, repeat the work in the matrix at the process pH and heat load. The report should show individual results, not only a pass statement, and identify the pack and lot family. A 1 kg pouch and a 25 kg drum differ in headspace, opening history and surface-to-volume ratio; the data belongs to the pack you will buy. Accelerated data support a retest period; they do not replace the long-term arm. ## The finished formula changes the answer A capsule or tablet has low water activity, but the shell and the excipients can still transfer moisture. Check loss on drying at release and after storage, and check the appearance of the fill. A tablet made by wet granulation has passed through water and a drying step; the granulation is a process risk that the certificate does not describe. A gummy combines water, heat and often a reducing sugar, so browning is the main risk and the colour of the finished piece is the evidence. A stick pack depends on the seal and the foil; a pinhole is a failure, and the strip should be inspected. A beverage combines pH, preservative, heat and taste, and the bulk stability is the starting point rather than the answer. The formulator decides whether an overage is needed; that is a label and stability decision, not a repair for a pack that lets moisture in. ## How the shelf life is set No single shelf-life number is published for L-alanine, because the pack and the storage condition set it. The assigned retest period belongs on the specification and is supported by the stability file for that pack. A number without a pack, a condition and a test panel is a claim, not a shelf life. After the retest period, re-assay the retained sample before extending use. Do not extend by assumption, and do not carry a bulk figure to a repacked container. The product hub lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the identity page covers the rotation; the quality page describes the release workflow. ### 04 L-alanine: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-alanine/moq/ Reviewed: 2026-11-19 The MOQ for L-alanine is 1 kg, supplied as a 1 kg foil pouch; the standard bulk pack is a 25 kg fiber drum. The catalogue form is a 40 mesh powder, with a granulated grade quoted on request. Lead time is 1–7 days for the standard pack. In one lineOne kilogram is the smallest order because it is the smallest pack that can be sampled, tested and traced as a lot. ## Why the minimum is 1 kg A 1 kg pack covers a bench-scale trial, a retained sample and an independent identity test. It is also small enough to ship by air without a pallet, which matters when a formulator needs material before the production plan is fixed. The pack carries a lot code and a certificate, so the sample and the trial material are the same traceable unit. Below 1 kg, the material is usually split from a larger lot and repacked. That adds handling, loses the original pack identity and makes traceability harder, without changing the chemistry. The 25 kg drum is the bulk unit: it reduces handling per kilogram, but it commits inventory and a longer storage period. The MOQ is a pack decision, not a volume incentive. The same logic applies to the grade. A 1 kg pouch of the 40 mesh catalogue powder is the standard trial unit. A granulated grade is a different specification and may carry a different minimum, because the granulator is set up for the order. ## Packs and formats Standard L-alanine packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Bulk density and dissolution may change The catalogue form is a 40 mesh powder: at least 95% passes a 40 mesh sieve. A change of mesh or granulation is a different specification, not a packing choice. If the dosage form needs a freer-flowing powder, say so before the quotation, because the change moves the particle-size line and may move the lead time. Pack size and grade should be written together on the order. A 25 kg drum of a granulated grade and a 25 kg drum of the catalogue powder are not interchangeable, even though the net weight is the same. ## Lead time and dispatch The standard pack is quoted at 1–7 days from order confirmation. That window covers picking, document preparation and dispatch; it does not include the shipping transit, customs clearance or the customer's own quality release. A granulation or a non-standard pack adds time, and the quotation should state it separately. Ask for the planned dispatch date when the L-alanine order is placed. The 1 kg foil pouch leaves as a parcel; the 25 kg fiber drum is pallet freight, and who books carriage and handles entry clearance follows from the Incoterm. The COA, specification and SDS should be ready with the lot code, not sent after the material. For a granulated grade, confirm the production slot first, because the extra step can move the date. If the order is tied to a production date, say so at the quotation stage. A 1–7 day window is a dispatch commitment, and the transit time to the destination is a separate number that the forwarder can confirm. ## What a quotation needs Six items make a quotation firm enough to compare: - Product and form. L-Alanine, CAS 56-41-7, with the L-form written out. - Specification. Assay on the dried basis, specific rotation, loss on drying, pH, particle size, heavy metals and microbiology. - Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated variant. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, specification, SDS, and any market-specific statement the importer needs. - Intended use and market. Supplement, food or another use, and the market where it will be sold. A quotation without the particle size, the rotation and the market is incomplete. The same powder can be suitable for one destination and outside the file for another, and the paperwork is part of the offer. Commercial terms are stated on the quotation rather than on this page. ## The sample is a lot, not a demonstration The 1 kg pack is the qualification sample. Test identity, assay, rotation, loss on drying and microbiology before scaling, and keep a retained sample from the same pack. The lot code on the sample, the COA and the quotation should match. A sample that cannot be traced to a lot is a demonstration, not a qualification. If the project needs a smaller quantity for a bench trial, discuss it before ordering. A split from a bulk lot is a repack with its own traceability, not the catalogue pack, and it should be documented as such. Do not assume that a bench sample and the production drum will come from the same lot. The sample is also the moment to test the powder in the process, not only in the laboratory. Fill a trial capsule, run a blend or make a stick pack, and check the flow and the taste. A certificate can confirm the chemistry; only the trial confirms that the grade suits the line. ## Terms to settle before the first order For L-alanine, the quotation should carry the Incoterm, the 1 kg foil pouch or 25 kg fiber drum, the dispatch window and the document list beside the quality terms. Those terms include the specification revision, the assay and rotation results released with each lot, the retained sample and the retest period. Put the change-control path for a move from 40 mesh powder to a granulated grade in the same agreement. Settling it ahead of the first production run is easier than reconstructing it after a disputed lot. Returns on L-alanine are settled against the release specification, not the look of the powder. Keep the retained sample from the 1 kg pouch, re-test assay on the dried basis and specific rotation together, and agree the laboratory before a referee test is booked. A complaint about flow has to name the mesh and whether the lot was granulated, because that is a different specification. The quotation and the quality agreement should also state the replacement route and which party funds the referee analysis. A change of granulation or pack is a specification change, and it should go through the same agreement. The product hub carries the catalogue specification; the COA page lists the release tests; the compliance page covers the market files; the MOQ glossary entry defines the term; the logistics page covers shipping and documents. The release workflow is on the quality page. ### 05 The regulatory file for L-alanine URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-alanine/compliance/ Reviewed: 2026-11-19 L-alanine is sold as a food and supplement ingredient under the destination market's general food law and its supplement or flavouring rules. The exact route is confirmed by the buyer's regulatory team, because the same amino acid can enter a market as a food ingredient, a supplement ingredient or a flavouring substance, and those routes carry different documents and limits. This page lists the file and the checks, not a legal conclusion. In one lineThe specification describes the lot; the regulatory file shows the route, the limits and the label that apply where the finished product is sold. ## What the file has to answer L-alanine is a single amino acid, so the file is smaller: which grade and specification version, which lot and certificate, which limits and label rules, and what changes if the fermentation source or the drying step changes. The COA answers the lot, the TDS the specification and the SDS the handling; the route remains a separate question. The supplier's file is evidence for the buyer's review; it is not a substitute for the buyer's determination. That division matters for an amino acid, because the same powder can be a supplement ingredient in one product and a flavouring component in another, and the two uses do not share a single document set. The file should say which use it covers and which specification version it describes. The file should also contain the allergen and GMO statements, the origin record, the residual-solvent statement and any customer-specific declaration. Where a statement is not available for the lot, the gap should be named before the order, not discovered at the port. Keep a document list with version and date; an undated PDF is hard to tie to a specification revision. ## European Union The EU file is built from the specification, the contaminant results and the label. Regulation (EC) No 178/2002, Regulation (EU) No 1169/2011 and Directive 2002/46/EC apply alongside any product-specific route. For a flavouring use, the flavourings framework (Regulation (EC) No 1334/2008) applies instead of, or in addition to, the supplement rules. The buyer's regulatory team identifies the route for the destination member state and confirms that the specification matches the material being placed on the market. The contaminant rules sit in Regulation (EU) 2023/915, as of this review. The regulation sets maximum levels for lead, cadmium and mercury in food supplements, with exceptions and notes that depend on the category. Arsenic has no harmonised maximum for food supplements in that regulation, so a customer or market limit applies. The current consolidated text is the reference; a summary on a supplier page is not. The label review is separate from the specification review. The ingredient name on the pack has to be the name of the material that was bought, and the claims review has to be done against the authorised claims for the finished product. A certificate does not approve a claim, and a claim does not change the specification. ## United States The US file is built around the exact dietary ingredient or food substance and its intended use. The supplier should be able to name the basis it relies on and point to the supporting document; the buyer confirms that the basis covers the finished product and the claim. For a dietary supplement, the current good-manufacturing-practice rules in 21 CFR 111 apply to the finished product, and the Supplement Facts panel names the ingredient. The label and the claim are reviewed separately from the certificate. A structure or function statement needs substantiation and the required disclaimer, and no disease-related claim is permitted for a dietary supplement. The buyer's reviewer decides which category the wording falls into; the supplier's file supplies the identity and the composition, not the claim. ## Contaminants and the finished-product calculation The catalogue panel is an ingredient specification, not a finished-product limit. The lot result has to be converted to the daily dose and compared with the limit that applies to the finished product in the destination. A lot that passes the ingredient panel can still fail the finished-product calculation when the daily dose is high. Contaminant limits to confirm for the finished product | Parameter | Catalogue limit | What the file should show | Lead (Pb) | ≤3 mg/kg | Lot result, method and the finished-product calculation | Arsenic (As) | ≤2 mg/kg | Lot result and the agreed market or customer limit | Cadmium (Cd) | ≤1 mg/kg | Lot result and any category exception that applies | Mercury (Hg) | ≤0.1 mg/kg | Lot result and method The calculation is simple arithmetic but easy to skip: multiply the lot result by the ingredient mass per daily dose and divide by the finished-product mass. For a capsule the mass is the fill weight; for a powder the mass is the serving. The file should show the sum, not only the lot certificate. ## Label and claims The label names the material, the quantity and, where the destination requires it, the source. For L-alanine the name should identify the L-form; a generic “alanine” is ambiguous when beta-alanine or DL-alanine is also on the market. The ingredient list, the Supplement Facts panel and the specification should use the same name and the same CAS number. The claim review is separate. In the EU, nutrition and health claims are governed by Regulation (EC) 1924/2006, and only authorised claims can be used under the conditions attached to them. In the US, a structure or function statement is made under the dietary-supplement rules with the required disclaimer. This page makes no disease-related claim and no statement about a body function, and the supplier's file does not approve any claim. ## The documents in the file - Specification, with the version and the date, naming L-alanine, CAS 56-41-7 and the grade. - Certificate of analysis for the lot, with the assay basis and the rotation conditions. - Technical data sheet and safety data sheet. - Allergen and GMO statements, and the origin record. - Residual-solvent statement and any customer-specific declaration. - A statement of the intended use and the destination market that the file covers. The documents should agree with each other. A specification that names 40 mesh, a certificate that reports a granulated powder and a quotation that offers a different mesh describe three different purchases, even when all three carry the same product name. ## Checklist before the first order - Specification version, CAS and the exact L-form are named. - COA, TDS, SDS, allergen, GMO, origin and residual-solvent statements are on file. - The contaminant results are converted to the finished-product dose. - The label and the claim have been reviewed for the destination. - The source, process, grade and pack are under change control. - The quotation, the specification and the certificate refer to the same version. The catalogue specification is on the L-alanine product page; the certificate is explained on the COA page; the identity evidence is on the identity page; the release workflow is on the quality page; the framework notes are in the regulatory library. ### 06 How we prove a lot is L-alanine, not another amino acid URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-alanine/identity/ Reviewed: 2026-11-19 An L-alanine lot is the named material when the document, the infrared spectrum, the HPLC retention, the specific rotation and the mass balance agree. The rotation separates the L-form from a racemate; the IR and HPLC separate alanine from another amino acid. No single line does both jobs. In one lineIdentity is a set of agreeing measurements: IR and HPLC say alanine, the rotation says the L-form, and the mass balance says the powder has not been diluted. ## The five identity layers A certificate can name the right material and still fail to prove it. The layers below are separate questions, and each one needs its own evidence. A supplier who answers only the first has described the paperwork, not the powder. Five layers of L-alanine identity | Layer | Question | Test | What it proves | Document | Is the material named? | Name, CAS 56-41-7, formula | Paperwork only | Spectrum | Is it alanine? | IR against a reference; HPLC retention | The molecule, not the enantiomer | Chirality | Is it the L-form? | Specific rotation; chiral HPLC | The enantiomer | Solid state | Is the crystal form consistent? | X-ray diffraction | The solid form, not the purity | Mass balance | Is it diluted? | Assay, loss on drying, related substances | Consistency of the numbers The layers are independent by design. A racemised lot can pass the document, spectrum and mass-balance layers. A lot diluted with another amino acid can pass the document and the rotation if the diluent is also chiral and close in rotation. Only the combination catches both. ## The rotation and the enantiomer ratio Specific rotation is the routine measurement that sees chirality. L-alanine rotates polarised light to the right, the D-form rotates it to the left by the same magnitude in an achiral solvent, and a racemic mixture reads close to zero. The catalogue window is +14.0° to +15.0° on the dry basis. The arithmetic is instructive. Take the middle of the window, about +14.5°, as a working pure L value; the D-form then contributes an equal and opposite rotation. A lot reading +7.2° has roughly half the rotation of the pure L-form, which is not a small method variation but a large D fraction or a diluted L-form. A lot at +13.0° is outside the catalogue window even though it is still predominantly L. The rotation is an optical gate, not a precise enantiomeric-excess assay. Two cautions belong beside the number. First, rotation depends on solvent, concentration, temperature, wavelength and path length; a bare value cannot be reproduced or compared. Second, a low reading can be a racemate, a D-rich lot or a measurement error. Re-measure under the declared conditions before rejecting the lot, and use chiral HPLC when the D-alanine content has to be quantified. The catalogue specifies rotation, not chiral HPLC, so a quantitative D figure is an additional test rather than a routine line. The ratio also has an upper side. A reading above +15.0° is not evidence of a purer L-form, because a pure enantiomer has a fixed rotation; it more likely reflects a method difference. The window is a specification, and the certificate should show the measured value and the conditions inside it. ## X-ray diffraction and the solid state X-ray diffraction answers a different question: is the solid crystalline, and does its pattern match a reference? L-alanine and DL-alanine do not share a crystal lattice. The racemate can form a racemic compound with its own pattern, so a diffraction scan can distinguish the two solids when both are crystalline. Beta-alanine has a different pattern again, which makes XRD a useful cross-check when the identity of the solid is disputed. XRD is not a purity assay and it does not measure the enantiomeric excess in solution. A blend of two crystalline phases may show both patterns, but a small amorphous fraction or a surface coating may not appear at all. Ask for the reference pattern and the detection limit before reading a “match” statement, and use XRD as supporting evidence rather than as a release test. The method earns its place in three situations: a new source whose crystal form is unfamiliar, a disputed lot where IR and HPLC agree but the powder behaves differently, and a solid-state question about a granulated grade. In routine release, IR and HPLC remain the practical identity pair. ## What adulteration looks like Common L-alanine substitutions and the signals | Adulterant | What it does | Signal | Test | D-alanine | Same molecule, opposite rotation | Rotation below the window | Specific rotation; chiral HPLC | DL-alanine | Racemic mixture sold as the L-form | Rotation close to zero | Rotation; chiral HPLC; XRD | Beta-alanine | Same formula and mass, different molecule | IR and retention differ; no rotation | IR; HPLC; NMR; rotation | Glycine | Similar white powder and sweet taste | Assay and retention differ | IR; HPLC; assay | Maltodextrin or another diluent | Bulking that passes appearance and flow | Assay low; loss on drying may move | Assay; loss on drying; IR | Moisture | Not an adulterant, but it dilutes the as-is powder | Loss on drying high; dried assay normal | Loss on drying; assay on both bases Colour and taste are the weakest signals. A white crystalline powder with a mildly sweet taste describes L-alanine, glycine and several other amino acids. The stronger signals are the rotation, the IR spectrum and the HPLC retention, read together. A certificate that reports appearance and assay but no identity or rotation has left the most likely substitutions untested. ## How to write the identity into the specification - “L-Alanine, CAS 56-41-7, C3H7NO2, white crystalline powder.” - “Identification by IR against a reference and by HPLC retention.” - “Assay 98.5–101.5% by HPLC on the dried basis; loss on drying ≤0.5%.” - “Specific rotation +14.0° to +15.0° on the dry basis, with solvent, concentration, temperature and wavelength stated.” - “Chiral HPLC for D-alanine on request, with the limit of quantification reported.” - “pH 5.0–7.0 in a 1% solution; heavy metals, microbiology and particle size as listed.” A line that reads “alanine 99%” is a specification for an assay, not for L-alanine. The form and the rotation belong in the same document as the percentage. ## Five questions for the supplier - Which CAS number and which form are on the certificate, and does the label use the same name? - What is the specific rotation for this lot, and under which solvent, concentration and temperature was it measured? - Does the HPLC method separate L-alanine from beta-alanine and from D-alanine, or does it only measure a total amino-acid peak? - What is the loss on drying, and is the assay calculated on the dried basis? - If the rotation or the identity is disputed, will you accept a joint re-test on the retained sample? Five direct answers amount to an identity file; one assay percentage does not. The product hub carries the catalogue specification; the COA page shows where each figure sits on the certificate; the grades page compares the forms; the L-alanine vs beta-alanine page takes the isomer question further; the methods library describes the separation; the quality page covers the release workflow. ### 01 What the COA for L-aspartic acid actually contains URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-aspartic-acid/coa/ Reviewed: 2026-11-19 The certificate for an L-aspartic acid lot reports appearance, identification by infrared and HPLC, assay by HPLC, specific rotation on the dried basis, loss on drying, the pH of a 1% solution, particle size, heavy metals and microbiology. The assay says how much aspartic acid is present, the rotation says it is the L enantiomer rather than the racemate, and the pH and moisture describe the powder that will be weighed. The limits below are the catalog specification; the batch COA confirms one pack. In one lineThe assay reports how much aspartic acid is in the drum, the rotation reports which enantiomer it is, and the pH reports how the powder behaves in water. ## The certificate as a test report A certificate is auditable when every row names the analyte, the method and the acceptance window. A row that says only “conforms” asks the reader to trust a conclusion. Here infrared and HPLC identify the molecule, rotation the enantiomer, assay the quantity, and loss on drying the basis of that quantity. Identity, assay, chirality and moisture · L-aspartic acid | Parameter | Method | Release limit | Appearance | Visual | White crystalline powder | Identification | IR and HPLC | Conforms to the reference | Assay | HPLC | 98.5–101.5% | Specific rotation | Polarimetry, dried basis | +24.0° to +26.5° | Loss on drying | Gravimetric | ≤0.5% | pH (1% solution) | Potentiometry | 2.5–4.0 Physical, contaminant and microbiological limits | Parameter | Method | Release limit | Particle size | Sieve analysis | ≥95% through 40 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent The pH line is easy to misread. At roughly 5 g/L, the 1% solution named in the catalog is not fully dissolved at room temperature, so the method should state whether the reading was taken in a suspension or in a saturated solution, and at what temperature. ## The assay basis, the detector and the rotation conditions The assay is a percentage of the named molecule, but of which weight? A certificate that says 99.0% without as-is or dried has left the reader to guess. The water window is small here — loss on drying is ≤0.5% — but the two bases still describe different powders: a lot at 99.0% as-is with 0.4% water calculates to about 99.4% dried. The specification should decide which basis the release uses. HPLC supplies the assay and part of the identity. Aspartic acid has no useful ultraviolet chromophore, so the method relies on derivatisation, ion-exchange with post-column ninhydrin, or an evaporative or charged-aerosol detector. The certificate should name the detector, the standard and the preparation; “HPLC” alone does not say how the peak was seen. The HPLC method note explains why. Specific rotation is the chiral measurement. The catalog window is +24.0° to +26.5° on the dried basis; the conventional measurement uses 6 M hydrochloric acid, with the sample concentration and temperature stated. Solvent, concentration, path length and temperature all move the reading, so a certificate that omits them cannot be compared. A rotation near zero is not a weak lot; it points to the D form or a racemate. ## Release limit versus batch result The release limit is the boundary; the batch result is the measurement. They belong in separate columns, with method and basis beside each. A result column filled with the range proves only that the template was completed. What the result column should contain | Parameter | Release limit | Result column | Assay | 98.5–101.5% | A measured percentage, with basis and detector | Specific rotation | +24.0° to +26.5° dried basis | A measured angle, with solvent, concentration and temperature | Loss on drying | ≤0.5% | A measured percentage | pH | 2.5–4.0 | A measured value and the preparation used | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot Not every line tolerates a value near the edge: a rotation just inside the window leaves little room for method variation, a loss on drying at 0.5% leaves none for a humid filling room, and a pH at the top of the window is worth a look at the preparation. None is automatically a rejection, but each is worth a question before the lot is accepted. ## What moves between batches Most movement is water and finishing. Drying shifts loss on drying, the mill shifts the mesh, crystallisation shifts colour; none of those is a chemical change. The assay follows the water: a lot that has picked up moisture reads lower as-is while the dried figure holds. The rotation should not move if the material is the L form. A drift across lots, even inside the window, points to racemisation, a DL blend, a new source or a change in the polarimetry conditions. Ask for the raw angle, the solvent and the concentration before treating a rotation trend as a purity trend; chiral HPLC separates D from L and is the direct follow-up. A trend says more than one result near an edge: assay drifting with loss on drying, pH rising, a new peak in the chromatogram. The lot code on the certificate should match the pouch, the drum and the retained sample. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a disputed rotation, or a DL question the certificate does not answer. The useful panel is polarimetry with its conditions, chiral HPLC for D-aspartic acid, IR against a reference, an HPLC assay with a named detector, loss on drying, ICP-MS and microbiology. Add XRD if the solid form or a blend is in question, and a nitrogen determination if a nitrogen-rich diluent is suspected. Ask for the detection limit of each screen; “not detected” without a limit describes the method, not the drum. The sample tested should be the retained sample, and the report should carry the lot code, the specification revision and the raw data behind any disputed line. The analytical methods index lists what each panel can show. ## What to compare between suppliers Put six lines side by side: enantiomer and CAS number; assay with basis and detector; specific rotation with its conditions; loss on drying; pH with its preparation; and the contaminant and mesh results. Two certificates that agree on the assay and diverge on the rotation are not describing the same powder. Traceability is the second pass: the manufacturer, the lot and the specification revision should be on the certificate, and the lot code should appear on the pack. The catalog specification is on the L-aspartic acid product page; the form comparison is on the grades page; the tests that separate L from DL are on the identity page; the release workflow is on the quality page. ### 02 L-Aspartic acid grades: the free acid, the granulation and the salts URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-aspartic-acid/grades/ Reviewed: 2026-11-19 L-Aspartic acid is sold as the free acid in a 40 mesh powder, as a granulated grade for flow, and as mineral aspartates such as calcium aspartate. Only the first two are grades of the same ingredient; the salts are separate products with their own CAS number, assay and label. The catalog grade is the L free acid at 98.5–101.5% and ≥95% through 40 mesh, and the enantiomer is part of the specification. In one lineThe grade decision is the form first — L free acid, granulated L free acid or a mineral aspartate — and the particle size only after the label and the mass are settled. ## Why the form comes before the mesh An amino acid has no hydrate series; the commercial choices sit in the form and the finishing. Aspartic acid carries two carboxyl groups, and the free acid is the molecule with both acid protons still on those carboxyls. Granulation changes the particle, not the chemistry. A mineral aspartate replaces one or both protons with a cation, which makes it a different ingredient with a different formula, assay and label. DL-aspartic acid is a racemic mixture of the L and D forms. It is not a cheaper grade of L-aspartic acid: the label, the rotation and the specification all change. A purchase order that says “aspartic acid” without the enantiomer has not named the product, and a certificate for the racemate does not release the L form. The other acidic amino acid, L-glutamic acid, is a separate product rather than a grade of this one. The chemistry they share is set out on the aspartic versus glutamic acid page; it does not make them interchangeable in a drum. ## The materials sold around L-aspartic acid What the name can cover · grades and adjacent products | Material | What it is | Aspartic acid per gram | Label name | Typical use | L-aspartic acid, 40 mesh (catalog) | Free acid, crystalline powder | 1.00 g | L-aspartic acid | Capsules, tablets, dry blends | L-aspartic acid, granulated | Same chemistry, larger particles | 1.00 g | L-aspartic acid | High-speed presses, dust control | Calcium di-L-aspartate | Mineral salt of the acid | About 0.875 g, plus about 132 mg calcium | Calcium L-aspartate | Mineral delivery in a soluble salt | DL-aspartic acid | 1:1 mixture of L and D | About 0.50 g of the L form | DL-aspartic acid | Not a substitute where L is named The salt row is a different product, and the DL row is a different specification. A granulated lot is the same substance with a new mesh; that is the only row that can change inside this catalog without a new label. ## Solubility, pH and the powder The free acid is slightly soluble: about 5 g/L in water at 25 °C. That figure matters for the pH test as well as the formula. At 1%, the preparation used for the catalog pH is not fully dissolved at room temperature, and the measured value, 2.5–4.0, describes an acidic suspension or a saturated solution. Solubility rises away from the isoelectric point, near pH 2.8, so adding acid or alkali helps the powder into solution. The species in solution is then an ion rather than the neutral zwitterion, and if a salt is formed or added deliberately, the panel has to describe what went into the drum. A pH adjustment is a formulation decision with a labelling consequence, not a way to keep the powder unchanged. Granulation changes flow, dust and the dissolution rate, not the solubility. The catalog is ≥95% through 40 mesh; a granulated grade is quoted on its own particle-size range and bulk density. A coarser granule runs on a high-speed press, while a fine powder blends faster and dusts more. Calcium aspartate, by contrast, is soluble and near-neutral, so a switch to it changes the pH and the taste as well as the mass. ## What the form does to the label arithmetic The free acid carries no counter-ion, so the aspartic acid figure and the acid weight are the same number before the assay correction. The di-L-aspartate carries about 0.875 g of aspartate and about 132 mg of calcium per gram, so the same aspartic acid figure needs more powder and brings a mineral with it. These are label and weigh-up calculations, not a dose recommendation. Aspartic acid declared and the mass that carries it | Aspartic acid declared | Free acid (acid mass) | Calcium di-L-aspartate | Calcium delivered with the salt | 250 mg | 250 mg | 286 mg | About 38 mg | 500 mg | 500 mg | 571 mg | About 75 mg | 1,000 mg | 1,000 mg | 1,143 mg | About 151 mg The racemate makes the arithmetic worse. To deliver 500 mg of L-aspartic acid from DL-aspartic acid needs 1,000 mg of the racemate, and the panel still cannot say L-aspartic acid, because half the powder is the D form. A capsule fill sized on the free acid will not hold the same aspartic acid dose from the salt without a larger shell or fewer capsules. The free acid also tastes sour at the concentrations a powder blend reaches; a salt is closer to neutral, and the flavour system has to follow. ## Writing the grade into the specification - “L-aspartic acid, CAS 56-84-8, C4H7NO4; the L enantiomer is named in the product title.” - “Assay 98.5–101.5% by HPLC; name the detector, the standard and the assay basis.” - “Specific rotation +24.0° to +26.5° on the dried basis; state the solvent, concentration and temperature.” - “Loss on drying ≤0.5%; pH 2.5–4.0 on the stated 1% solution; state the preparation.” - “Particle size ≥95% through 40 mesh; for a granulated grade, state the range and the bulk density.” - “Limit for D-aspartic acid by chiral HPLC, with the method and the limit written into the specification.” - “Heavy metals and microbiology as listed; no added diluent or carrier.” The form belongs in the first line, not in a note. “Aspartic acid” alone does not say L or DL, free acid or salt, and a specification that leaves the form open cannot be enforced at the loading dock. ## When another form is the better fit If the label names calcium or magnesium, the salt is the ingredient and this free acid is not a drop-in, even when the aspartate content is higher. If the formula needs a neutral, soluble powder, the free acid may not fit the process; the salt dissolves without the acidulant, but it adds a mineral and changes the panel. If the buyer specifically wants the racemate, this catalog grade is the wrong material and the certificate will not support the purchase. And if the project is a beverage at neutral pH, the free acid can be dissolved with a pH adjustment, but the label and the regulatory file still have to describe what was added; that is a formulation review, not a grade choice. The product hub carries the catalog figures; the calcium aspartate page covers the salt route; the COA page shows the release tests; the identity page covers the L/D evidence. ### 02.1 L-Aspartic acid vs L-glutamic acid: two acidic amino acids URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-aspartic-acid/grades/l-aspartic-acid-vs-l-glutamic-acid/ Reviewed: 2026-11-19 L-Aspartic acid and L-glutamic acid are the two acidic amino acids: each carries a carboxylic acid side chain, but aspartic acid has one methylene between the backbone and the side carboxyl, while glutamic acid has two. That extra methylene moves the molecular weight from 133.10 to 147.13, the side-chain pKa from about 3.65 to 4.25, the solubility, the taste and the mass on a label. They are separate ingredients with separate CAS numbers and specifications. In one lineOne methylene group separates the two acidic amino acids; it moves the molecular weight, the side-chain pKa, the solubility, the taste and the mass on the label. ## One family, two ingredients Both are proteinogenic amino acids with a second carboxyl group. Aspartic acid is 2-aminobutanedioic acid; glutamic acid is 2-aminopentanedioic acid. The side chain is –CH2–CO2H in aspartate and –CH2–CH2–CO2H in glutamate. Both are dicarboxylic and both are acidic, with isoelectric points below pH 3.3. That is where the similarity ends for a buyer. Each is sold as the free acid and as salts. The salts are different ingredients: calcium aspartate and magnesium aspartate for the first, monosodium glutamate for the second. The free acid is the material this catalog supplies, and the salt is a separate purchase with its own label name and mass per gram. ## The numbers side by side L-aspartic acid and L-glutamic acid · free acids compared | Property | L-aspartic acid | L-glutamic acid | CAS number | 56-84-8 | 56-86-0 | Formula and molecular weight | C4H7NO4 · 133.10 g/mol | C5H9NO4 · 147.13 g/mol | Side chain | –CH2–CO2H | –CH2–CH2–CO2H | pKa, α-carboxyl | About 1.88 | About 2.19 | pKa, side-chain carboxyl | About 3.65 | About 4.25 | pKa, α-amino group | About 9.60 | About 9.67 | Isoelectric point | About 2.77 | About 3.22 | Water solubility at 25 °C | About 5 g/L | About 8.6 g/L The figures are for the free acids. A salt changes the molecular weight and the mass that carries a given amount of the amino acid, so the table cannot be used to compare a free acid with a salt. ## What the pKa difference does in a formula A pKa is the pH at which half of that group is deprotonated. The side chain of aspartic acid has a pKa near 3.65 and that of glutamic acid near 4.25, a gap of about 0.6 units. In a formula at pH 3, a meaningful share of the aspartate side chain is already deprotonated while the glutamate side chain is less so. At pH 6–7 both are fully ionised and the difference disappears. That is why the gap matters in acidic drinks and buffers, and not in a neutral capsule. An aspartate buffer works around pH 3.6; a glutamate buffer around pH 4.2. If a formula relies on one of them for its buffering, the other is not a drop-in, even though both are described as acidic amino acids. pH alone does not identify either acid. Both 1% solutions are acidic, and the windows overlap. The identity comes from the chromatogram and the spectrum, not from a pH meter; the release tests are set out on the COA page. ## Solubility and the dosage form At 25 °C, aspartic acid dissolves to about 5 g/L and glutamic acid to about 8.6 g/L. Both are slightly soluble, and both dissolve better away from their isoelectric points. In a 250 mL drink, 500 mg is 2 g/L and sits inside both limits; 1,000 mg is 4 g/L, close to the aspartic acid limit and still under the glutamic one. Those volumes are theoretical: dissolution rate, pH and the other solutes change the picture. The salts are far more soluble than the free acids. Calcium aspartate dissolves without an acidulant, and monosodium glutamate is the soluble form of glutamic acid. A formulator who needs a clear, neutral solution usually reaches for the salt, and the label changes with it. Switching from the free acid to a salt to fix solubility is a formulation and labelling decision, not a grade change. ## Taste: umami against sour Glutamic acid is the amino acid behind glutamate's umami taste, and monosodium glutamate is the reference ingredient for that taste. Aspartic acid is sour, and its umami contribution is weaker, so it reads as an acidulant first. At the concentrations where either acid is used in a dry blend, the difference is noticeable and it changes the flavour system and the pH. Taste is not a release test. A certificate cannot tell you how a powder tastes, and a taste panel is not a substitute for the identity tests. The practical point is narrower: the two acids are not interchangeable in a flavoured product even when the assay on the certificate is identical. ## The label and the mass On a label, the name is the ingredient. “L-aspartic acid” and “L-glutamic acid” are different declarations, and neither is a generic “acidic amino acid”. A formula that switches from one to the other needs a new panel, a new specification and a fresh check of the destination file. A route that covers one is not automatically a route for the other, even though they share a functional class. The mass arithmetic is simpler than for a salt: the free acid has no counter-ion, so the labelled acid and the weighed acid are the same figure before assay and overage. The salt is the case where a conversion is needed. Calcium di-L-aspartate carries about 0.875 g of aspartate per gram, so 500 mg of aspartic acid from the salt is about 571 mg of powder, and the panel also has to declare the calcium that comes with it. The calcium aspartate page sets out that arithmetic. The L-aspartic acid hub carries the catalog specification; the grades page places this comparison beside the salt and the racemate; the L-glutamic acid page carries the other specification. The HPLC note explains the separation, and the quality page describes the release workflow. ### 03 L-Aspartic acid: stable dry, and where the solution changes URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-aspartic-acid/stability/ Reviewed: 2026-11-19 The free acid is a crystalline solid with a water limit of ≤0.5% and, unlike a deliquescent salt, it does not pull water from the air; a sealed pouch or drum keeps it for the assigned retest period. The solution is the harder format: the acid is only slightly soluble, the pH is low, and heat, pH and reducing sugars change it. The shelf life is assigned from data for the exact pack and storage condition. In one lineThe powder fails by moisture and caking; the solution fails by heat, pH and a reducing sugar, and the pack decides which of the two you meet. ## The powder: moisture, heat and the pack The catalog loss on drying is ≤0.5%. That is a release gate, not a storage allowance: an opened pouch in a humid room picks up water, the powder cakes, and the as-is assay falls. The free acid is not a deliquescent salt, so the change is slower than it would be for a mineral salt, but a 25 kg drum liner left open for a week is enough. Keep the original pack closed, store it off a concrete floor, and let a cold pack equilibrate before opening so that condensation does not form on the powder. Light is not the main driver here. Aspartic acid has no extended chromophore, unlike a quinone or a vitamin, so the practical storage risks are moisture, heat and contamination rather than photodegradation. An opaque pack is still the sensible default for a powder that may sit in a warehouse for a year. ## The solution: solubility and pH come first At about 5 g/L at 25 °C, the free acid is slightly soluble. A 500 mg dose in 250 mL is 2 g/L and can dissolve; 1,000 mg in 250 mL is 4 g/L and sits close to the limit, so a small bottle is not a general-purpose vehicle for a gram-scale dose. Solubility rises away from the isoelectric point, near pH 2.8, but the species that forms at a higher pH is a salt, and the panel has to describe what was added. In solution the acid is a zwitterion and the pH is low, around 2.5–4.0 for a 1% solution. Heat, pH and reducing sugars are the variables that move it. With a reducing sugar, the amino group can enter a Maillard reaction during storage or a heat step, and the colour darkens. At high pH and temperature the chiral centre can racemise slowly, which shows up as a rotation change rather than an assay change. Microbial growth is the fourth risk in an unpreserved aqueous system. Trace iron and copper are worth keeping out of the contact path. The amino and carboxyl groups bind metals, and a metal-catalysed colour change can appear in a blend before the assay moves. ## What drives the change Factors that move L-aspartic acid in storage and in formula | Factor | What it does | Control | Moisture | Cakes the powder, raises loss on drying, lowers the as-is assay | Sealed pouch or lined drum; dry store | Heat | Accelerates Maillard browning and slow racemisation | Cool process; controlled warehouse | pH | Shifts ionisation and the salt form; high pH favours racemisation | Validate the matrix pH; avoid a label change | Reducing sugars | Maillard browning with the amino group | Choose the sugar; control water activity and heat | Trace metals | Complexation and colour in solution | Avoid iron and copper contact | Microbiology | Growth in an unpreserved solution | Preservative or sterile process; validated hold These factors act together. A warm, humid blend with a reducing sugar is worse than the sum of the two, and a neutral solution in clear glass combines pH, heat and microbial risk. The useful question is not whether the acid is stable, but in which pack, at which condition, for how long. ## A stability protocol for the ingredient State the pack, the condition, the time points and the tests. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% relative humidity cover the warehouse; accelerated storage at 40 °C/75% relative humidity stresses the pack. A light-exposure arm can be added for confirmation, though the solid is not the photo-sensitive part of this range. Test assay, specific rotation, loss on drying, appearance, pH and microbiology at each point. For a drink or a stick pack, repeat the work in the matrix at the process pH and heat load. The report should show the individual results, not only a pass statement, and it should identify the pack and the lot family. Ask for the stability summary for the pack you will buy. The 1 kg pouch and the 25 kg drum have different headspace and opening histories, and one pack's data does not transfer to the other. ## The finished formula changes the answer Capsules and tablets run at low water activity, but the excipients can still transfer moisture and the fill can cake, so check loss on drying at release and after storage. An effervescent tablet is the one place where the acid is meant to react: the carbonate is the base, the acid is the acidulant, and the pair has to stay dry until use. A humid blend starts that reaction in the hopper. A powder blend with a reducing sugar, a flavour system and a hygroscopic excipient is the most likely place for browning. A beverage adds pH, heat and microbial risk. The bulk stability of the ingredient is the starting point; the matrix, the process and the pack decide the rest. ## How the shelf life is set We do not publish a single shelf-life number for L-aspartic acid, because the pack and the storage condition set it. The assigned retest period belongs on the specification and is supported by the stability file for that pack. After the retest period, re-assay the retained sample before extending use, and do not carry a bulk figure across to a repacked container. The product hub lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the HPLC note describes the assay; the quality page covers the release and retest workflow. ### 04 L-Aspartic acid: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-aspartic-acid/moq/ Reviewed: 2026-11-19 The MOQ for L-aspartic acid is 1 kg, supplied as a 1 kg foil pouch; the standard bulk pack is a 25 kg fiber drum. Lead time is 1–7 days for the standard 40 mesh powder. A firm quotation needs the enantiomer, the assay basis, the mesh, the quantity and pack, the destination and Incoterm, the documents and the intended use. In one lineA one-kilogram pouch is the smallest unit that carries its own lot code, and that is why it is the minimum rather than a courtesy split. ## Why the minimum is 1 kg A 1 kg pack covers a bench trial, a retained sample and an independent identity test. It also ships as a parcel, which matters when a formulator needs material before the production plan is fixed. The pack is a commercial unit with a lot code, not a scoop from a drum. Below 1 kg, the material is usually split from a larger lot and repacked; that adds handling, loses the original pack identity and makes traceability harder without changing the chemistry. The 25 kg drum is the bulk unit: less handling per kilogram, but it commits inventory and a longer storage period. The MOQ is a pack decision, not a volume target. A first order that buys more than the trial can consume commits storage and a retest it may not need. ## Packs and formats Standard L-aspartic acid packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Particle profile and bulk density change The catalog form is a 40 mesh powder, ≥95% through 40 mesh. Granulation is a different particle-size specification, not a packing choice. Say so before the quotation, because the change moves the mesh line and may move the lead time. A granulated grade also changes the bulk density, so the fill weight on a capsule line may need a new trial. ## Lead time and dispatch The standard pack is quoted at 1–7 days from order confirmation. That window covers picking, document preparation and dispatch; it does not include the shipping transit, customs clearance or the customer's own quality release. A granulated grade or a non-standard pack adds time, and the quotation should state it separately. Confirm the dispatch date for L-aspartic acid when the order is placed; the 1–7 day figure is a window, not a date. The 1 kg pouch ships by parcel and the 25 kg drum by pallet; the trade term fixes which side arranges carriage and import clearance. Send the COA, specification and SDS alongside the lot code, and make sure the pH method and mesh are on the papers. A granulated grade may need its own production slot, so ask for that date before the order is fixed. ## What a quotation needs Six items make a quotation firm enough to compare: - Product and enantiomer. L-aspartic acid, CAS 56-84-8, with the L form written out. - Specification. Assay basis and detector, specific rotation, loss on drying, pH, mesh, heavy metals and microbiology. - Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated variant. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, specification, SDS and any market-specific statement the importer needs. - Intended use and market. Supplement, food or another use, and the market where it will be sold. A quotation without the enantiomer and the assay basis is incomplete. The same powder can suit one destination and sit outside the file for another, and the paperwork is part of the offer. We do not publish commercial terms on this page; they are stated on the quotation. ## The sample is a lot, not a demonstration The 1 kg pack is the qualification sample. Test identity by IR and HPLC, assay, specific rotation, loss on drying and microbiology before scaling, and keep a retained sample from the same pack. The lot code on the sample, the COA and the quotation should match. A sample that cannot be traced to a lot is a demonstration, not a qualification. If the project needs a smaller quantity for a bench trial, discuss it before ordering. A split from a bulk lot is a repack with its own traceability, not the catalog pack, and it should be documented as such. Do not assume that a bench sample and the production drum will come from the same lot. ## Terms to settle before the first order The quotation sets out the commercial terms, the Incoterm, the pack, the lead time and the documents. The quality terms belong beside them: the specification revision, the COA per lot, the retained sample, the retest period and the change-control route. A quality agreement is easier before the first production order than after the first dispute. Returns on L-aspartic acid should be decided from the retained sample and a joint re-test, with the commercial terms and the quality agreement as the basis. Re-test assay, specific rotation on the dried basis and loss on drying on one portion, and record whether the pH reading came from a suspension or a saturated solution, because the free acid dissolves slowly. Name the laboratory and who bears the referee cost in the agreement. A granulated lot is its own mesh specification, so a flow complaint has to say which grade was supplied. The product hub carries the catalog specification; the COA page lists the release tests; the compliance page covers the market files; the MOQ glossary entry defines the term. ### 05 The regulatory file for L-aspartic acid URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-aspartic-acid/compliance/ Reviewed: 2026-11-19 L-Aspartic acid is supplied as the free acid, CAS 56-84-8. The catalog specification describes the material; the regulatory file is built around the destination, the intended use and the finished product. The buyer's regulatory team confirms the route. This page lists the documents and checks that belong in the file, so the specification and the commercial pack can be reviewed together. In one lineThe specification describes the powder; the regulatory file shows which route, which limits and which label apply where it will be sold. ## What the file contains A complete file answers four practical questions. What is the material, and which specification revision is being bought? Which lot is being released, and what does its certificate report? Which limits and label rules apply to the finished product? And what changes if the source, the process or the pack changes? The certificate of analysis answers the lot question, the technical data sheet answers the specification question, and the safety data sheet answers the handling question. None of them answers the route question on its own. The file should also hold the allergen and GMO statements, the origin record, the residual-solvent statement and a statement that the material is the L enantiomer, supported by the specific rotation on the certificate. Where a statement is not available for the lot, the gap should be named before the order, not discovered at the port. A document list with version numbers is more useful than a folder of undated PDFs. ## European Union The EU file is built from the specification, the contaminant results and the label. General food law (Regulation (EC) No 178/2002), labelling (Regulation (EU) No 1169/2011) and the contaminants regulation (Regulation (EU) 2023/915, as amended) apply alongside the route for the intended use. For a food supplement, Directive 2002/46/EC and its national implementation set the framework. The current consolidated text is the reference, not a summary, and the buyer's regulatory team confirms the route for the destination member state. An amino acid does not have one route. Food, food supplement, flavouring and additive uses are assessed on different instruments, and a chemically similar amino acid does not inherit another's position. The additive route is written around named entries; it is not a generic permission for the amino acid family, and L-aspartic acid has to be assessed on its own intended use. The additive route is not a substitute for the supplement route. Great Britain and Northern Ireland are checked separately. The GB file uses the current GB register and GB labelling rules; Northern Ireland follows the EU framework. The buyer confirms which of the two applies and keeps the evidence with the order. ## United States The US file is built around the exact dietary ingredient or food substance and its intended use. For a supplement, the route turns on the dietary-ingredient basis, the Supplement Facts panel under 21 CFR 101.36 and the current good manufacturing practice record under 21 CFR 111. For a food use, the basis is a different one. The supplier should be able to name the basis it relies on and point to the supporting document; the buyer confirms that the basis covers the finished product and the claim. The certificate is not an authorisation. It reports the lot against a specification, and the label and the claim are reviewed separately. The US regulatory note sets out the framework; the route for a particular product remains a decision for the buyer's regulatory team. ## Contaminants and limits The contaminant panel is a finished-product calculation, not only a drum result. The table below is the usual starting point for a food-supplement file; the current destination text and the daily dose decide the final limit. Contaminant limits to confirm for the finished product | Parameter | Typical supplement reference | What the file should show | Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method and the finished-product calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception that applies | Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result and method | Arsenic (As) | Customer or market limit | The agreed limit and the method, stated on the certificate The arithmetic is simple and often left out. At a 1,000 mg daily dose of aspartic acid, a 3.0 mg/kg lead limit allows 3 µg of lead per day from this ingredient: 3 mg/kg multiplied by 0.001 kg. The result is a share of the finished product's allowance, not the whole of it, and the excipients add their own contribution. The file should show that calculation next to the lot result. ## Label and claims The label names the material in the form the destination requires. “L-aspartic acid” is the ingredient; “aspartic acid” without the enantiomer is ambiguous where the L form is the claim, and a salt has a different name again. The claim review is separate: the brand's regulatory reviewer confirms that the wording is allowed for the product, the form and the market. There is no disease-related claim on this material, and the certificate does not approve a claim. If a structure or function wording is used, it needs substantiation and the destination's own rules, and the reviewer signs it off against the finished product rather than against the drum. A claim does not change the specification, and a specification change does not carry a claim with it. ## Documents for the file The core set is the specification with its revision, the COA for the lot, the technical data sheet and the safety data sheet. The supporting set is the allergen statement, the GMO statement, the origin record, the residual-solvent statement, the enantiomer statement and the contaminant results. A packaging statement and a declaration of any irradiation treatment belong in the file where the destination asks for them. Each document should carry the product name, the form, the CAS number and a version or lot reference, so that the quotation, the specification and the certificate can be read as one set. The COA page explains the release document; the identity page covers the L/D evidence; the quality page describes the release file. ## Checklist before the first order - Specification version, CAS 56-84-8 and the L form are named. - COA, TDS, SDS, allergen, GMO, origin and residual-solvent statements are on file. - The enantiomer statement is supported by the specific rotation, not only by the product name. - The contaminant results are converted to the finished-product dose. - The label and the claim have been reviewed for the destination. - The source, process and pack are under change control. The product hub carries the catalog specification, and the EU regulatory note provides the framework references for the file. ### 06 How we prove an L-aspartic acid lot is the L form URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-aspartic-acid/identity/ Reviewed: 2026-11-19 A lot is L-aspartic acid when four lines agree: the document names the L form and CAS 56-84-8, IR and HPLC match the reference, specific rotation falls inside +24.0° to +26.5° on the dried basis, and the mass balance closes with loss on drying and the assay. The rotation is the line that separates the L form from a racemate; the assay alone cannot. In one lineIdentity is the agreement of the document, the spectrum, the rotation and the mass balance, and the rotation is the one line that separates L-aspartic acid from a racemate. ## The four identity layers A certificate can name the right material and still fail to prove it. The four layers below are separate questions, and each needs its own evidence. A supplier who answers only the first has described the paperwork, not the powder. Four layers of L-aspartic acid identity | Layer | Question | Test | What it proves | Document | Is the L form named? | Name, CAS number, formula | Paperwork only | Spectroscopy | Is the molecule aspartic acid? | IR and HPLC retention | The molecule, not the enantiomer | Chirality | Is it the L form? | Specific rotation; chiral HPLC | The enantiomer and the L/D ratio | Mass balance | Is it diluted or wet? | Assay, loss on drying, related substances | Consistency of the numbers The layers are not interchangeable. A match on IR plus a good assay is consistent with either enantiomer, and a rotation inside the window is consistent with a lot that has been diluted with a non-rotating carrier. The file needs the lines to agree, not one line to be strong. ## The L/D ratio: rotation and chiral HPLC Specific rotation is a sum of contributions. The L form rotates +24.0° to +26.5° under the stated conditions; the D form rotates the other way; a racemate sits close to zero. A blend of L and DL gives an intermediate value, so the observed rotation can be read as an approximate L fraction — but only when the solvent, concentration, path length and temperature match the reference. The conventional measurement uses 6 M hydrochloric acid, and a certificate that omits those conditions has not given a comparable number. Chiral HPLC is the direct measurement of the L/D ratio. It separates the two forms and reports the D-aspartic acid content, which is the figure a specification should limit. Rotation is the release test because it is fast and needs little sample; chiral HPLC is the confirmatory test when the rotation is disputed or a blend is suspected. Rotation is not a purity assay. A low reading can be racemisation, a DL blend, a different source or a mistake in the measurement conditions. A high assay with a near-zero rotation is the classic combination that points to a racemate or a blend, and it is the reason the two figures belong side by side on the certificate. ## X-ray diffraction: the solid-state check X-ray diffraction asks whether the solid is crystalline and whether its pattern matches a reference. It can separate a crystalline lot from an amorphous dilution, and it can compare two sources. It is not a routine chiral test, and it does not measure water or a counter-ion. The pattern of a racemic crystal can differ from that of the enantiopure solid, but whether XRD settles an L/D question depends on the reference patterns in hand; rotation or chiral HPLC is the direct test. XRD is not a routine release test for this product. It earns its place when the question is solid form, a blend or a new source, and the report should include the reference pattern and the detection limit rather than a bare “match”. ## What adulteration looks like Substitutions and blends to look for · L-aspartic acid | Adulterant | What it changes | Signal | Test | DL-aspartic acid | Rotation moves toward zero | Low rotation; a D peak | Polarimetry, chiral HPLC | L-glutamic acid | One extra methylene; similar acidic amino acid | HPLC retention differs; both L forms rotate positive | HPLC and IR, not rotation alone | Calcium aspartate | Aspartate plus calcium; less acid per gram | Calcium, ash, higher pH | Calcium by ICP-OES or titration, IR | Diluent | Lowers the assay; changes water or ash | Low assay, high loss on drying or residue | Mass balance, IR | Moisture | Lowers the as-is assay; caking | Loss on drying high; dried assay normal | Loss on drying The glutamic acid row is the one that surprises buyers. Both are L amino acids and both rotate positive, so rotation alone does not separate them; the HPLC retention and the IR spectrum do. A non-specific assay that measures total amino acid by ninhydrin can count both, which is why the identity needs a separation rather than a single titration. Colour is a weak signal for this material. The powder is specified as white crystalline, and an off-white shade can come from the drying step; it is worth a batch record, not a rejection on its own. ## How to write the identity into the specification - “L-aspartic acid, CAS 56-84-8, C4H7NO4; the L enantiomer is named.” - “Assay 98.5–101.5% by HPLC; state the detector, the standard and the basis.” - “Identification by IR and HPLC against a reference; keep the spectra with the lot file.” - “Specific rotation +24.0° to +26.5° on the dried basis, with the solvent and concentration stated.” - “Limit for D-aspartic acid by chiral HPLC, with the method and the limit written in.” - “Loss on drying ≤0.5%; pH 2.5–4.0 on the stated 1% solution.” - “No other amino acid above the stated limit; contaminants, microbiology and mesh as listed.” ## Five questions for the supplier - Which enantiomer is this lot, and which CAS number is on the certificate? - What is the specific rotation, and under which solvent, concentration and temperature was it measured? - Can you provide the HPLC chromatogram and the IR spectrum, not only the assay percentage? - What is the D-aspartic acid result by chiral HPLC, and what limit applies? - What is the loss on drying and the assay basis for this lot, and will you accept a joint re-test on the retained sample if the result is disputed? Five direct answers amount to an identity file; a single assay percentage does not. The product hub carries the catalog specification; the COA page shows where each figure sits on the certificate; the grades page separates the L form from the salt and the racemate; the aspartic versus glutamic acid page covers the nearest look-alike; the FTIR note explains the spectrum. ### 01 What the COA for L-histidine actually contains URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-histidine/coa/ Reviewed: 2026-11-19 An L-histidine certificate answers four questions: what the lot is, how much histidine it contains, which enantiomer was measured, and whether the powder is the free base or a salt. The catalog reports IR and HPLC identification, assay by HPLC on the dried basis, specific rotation, loss on drying, pH, particle size, heavy metals and microbiology. Those figures are the catalog specification; the batch COA confirms one pouch or drum. In one lineThe assay measures how much histidine is present; the rotation and the pH establish which form it is, provided the method and the solvent are named. ## The certificate as a test report A certificate is useful when it can be audited line by line. Each parameter needs the test, the method that produced the number, and the limit the lot was released against. A row that says only “conforms” asks the reader to accept a conclusion without the evidence behind it. Identity, assay, moisture and form · L-histidine free base | Parameter | Method | Release limit | Appearance | Visual | White crystalline powder | Identification | IR and HPLC against a reference | Conforms | Assay | HPLC, dried basis | 98.5–101.5% | Specific rotation | Polarimetry, dried basis | −38.0° to −41.0° | Loss on drying | Gravimetric | ≤0.5% | pH (1% solution) | Potentiometry | 7.0–9.0 Physical, contaminant and microbiological limits | Parameter | Method | Release limit | Particle size | Sieve analysis | ≥95% through 40 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent The pH line is not a formality. A 1% solution of the free base sits between 7.0 and 9.0 because the imidazole ring is only partly protonated; a solution in the acidic range points to the hydrochloride or to an acid residue. ## The HPLC assay, its basis and the rotation The catalog assay is by HPLC on the dried basis. The pharmacopoeial assay for L-histidine is a non-aqueous titration with perchloric acid, also calculated on the dried basis against a 98.5–101.5% window. Either method can be valid, but the numbers are not interchangeable: one measures a chromatographic peak, the other a titratable acid. The certificate should name the method and put the basis in the assay row rather than in a footnote. Detection deserves its own line. The imidazole ring absorbs weakly at 254 nm, so an HPLC method usually runs at a low ultraviolet wavelength, uses a derivatisation step, or separates the amino acid by ion exchange with ninhydrin or mass detection. A certificate that gives a percentage and no method leaves the reader unable to tell which of those was used. The dried basis is a correction, not a measurement. A lot at 99.0% as-is with 0.4% loss on drying calculates to 99.40% on the dried basis. The 0.5% loss-on-drying limit keeps the correction small, but it is not zero, and a humid filling room can move it. Specific rotation is the chiral measurement, and it is solvent-dependent. The catalog window is −38.0° to −41.0° on the dried basis. The free base in water reads about −39°, while the pharmacopoeial method measures the same L form in 6 N hydrochloric acid at 110 mg/mL and expects +12.6° to +14.0°. Both can describe L-histidine. A rotation printed without solvent, concentration, path length and temperature cannot be compared with another certificate, and a racemate reads near zero under the same conditions. ## Release limit versus batch result The release limit is the gate; the batch result is what the laboratory measured. They belong in separate columns, with the method beside each. A result column filled with the specification range proves only that the template was completed. What the result column should contain | Parameter | Release limit | Result column | Assay | 98.5–101.5% dried basis | A measured percentage, with method and basis | Specific rotation | −38.0° to −41.0° dried basis | A measured angle, with solvent and concentration | Loss on drying | ≤0.5% | A measured percentage | pH | 7.0–9.0 (1% solution) | A measured pH, with the concentration | Heavy metals | Per element | A measured figure in mg/kg for each element A rotation just inside the window leaves little room for method variation, and a pH at the bottom of the window is worth a check for an acid residue or a salt fraction. Neither is an automatic rejection, but each is a question before the lot is accepted. The catalog certificate does not carry a chloride line, and that is the first additional test when the form is disputed: the free-base monograph limits chloride to 0.05%, while a hydrochloride monohydrate carries about 16.9% chloride by theory. ## What moves between batches Moisture moves first. The free base is hygroscopic enough that an open pouch gains water in a humid room, and the dried-basis assay hides the gain until the as-is weight is checked. Colour moves with the drying step and with trace-metal exposure; a cream or tan tint on a white powder is worth a question about the dryer and the contact surfaces. Particle size moves with milling and sieving, so the 40 mesh figure can change without any change in the chemistry. The rotation should not move if the material is the L form and the conditions are held; a slow drift across lots suggests a change in source or purification. Histamine is one decarboxylation step from L-histidine. The catalog specification does not set a histamine limit; a buyer who needs one should write it into the specification with a method and a limit. ## When to order an outside test Use an outside laboratory for a new source, a first shipment into a regulated market, a form claim the supplier's certificate cannot prove, an enantiomer question, or a disputed result. The panel is polarimetry with the conditions stated, chloride by ion chromatography or titration, an amino-acid HPLC profile, IR against a reference, ICP-MS for the metals, loss on drying and microbiology. Add chiral HPLC when the rotation is at the edge of its window or a racemate is suspected, LC-MS/MS for histamine when a limit applies, and XRD when the question is the solid form rather than the assay. Ask for the detection limit of each screen: a “not detected” entry without a limit describes the method, not the drum. The sample tested should be the sample retained, and the report should identify the lot. ## What to compare between suppliers Put six lines side by side: the form as named; the assay with its method and basis; the specific rotation with its solvent and concentration; pH; loss on drying; and chloride. Two quotations that agree on the assay and diverge on the other five are not describing the same powder. The lot code should appear on the certificate, the pack and the retained sample, and the certificate should name the producer, not only the trader. The catalog specification sits on the L-histidine product page. The form comparison is on the grades page; the tests that separate the free base from the salt are on the identity page; the release workflow is on the quality page; the chromatographic method is described in the methods section. ### 02 L-histidine free base or hydrochloride: choosing a grade URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-histidine/grades/ Reviewed: 2026-11-19 L-histidine is sold as the free base and as the hydrochloride, and the two are different label ingredients. The free base is C6H9N3O2 at 155.15 g/mol, with the whole mass present as histidine and a 1% solution at pH 7.0–9.0. The hydrochloride monohydrate is 209.63 g/mol, carries about 74.0% histidine, 16.9% chloride and 8.6% water of crystallisation, and gives an acidic solution. The catalog form here is the free base, a crystalline powder with at least 95% passing 40 mesh. The choice between the forms is set by the label, the dose and the matrix, not by which assay figure looks higher on a quotation. In one lineThe free base and the hydrochloride are different label ingredients: the salt adds chloride and water of crystallisation, so the declared name and the dose change with the form. ## Why the form is a specification question “L-histidine” on a purchase order is ambiguous. The free base and the hydrochloride share the histidine entity but not the molecular weight, the counter-ion, the solution pH or the label name. A certificate for one does not describe the other, and a formulation weighed for one will be wrong if the other arrives. The second axis is physical form. The catalog grade is a crystalline powder with at least 95% passing 40 mesh; a milled or granulated grade is available on request. Mesh changes flow, dust and dissolution rate, not chemistry. Write both axes into the specification: the chemical form and the particle size. ## Free base and hydrochloride side by side What changes between L-histidine free base and the hydrochloride | Line | L-histidine free base | L-histidine hydrochloride monohydrate | Label name | L-histidine | L-histidine hydrochloride | CAS | 71-00-1 | 5934-29-2 | Formula and molecular weight | C6H9N3O2 · 155.15 | C6H9N3O2·HCl·H2O · 209.63 | Histidine per gram | About 1.00 g | About 0.740 g | Chloride per gram | None added; monograph limit ≤0.05% | About 0.169 g | Water of crystallisation | None; loss on drying ≤0.5% | About 8.6% by theory | pH (solution) | 7.0–9.0 at 1% | 3.0–5.0 at 5% | Solubility in water | About 42 g/L at 25 °C | Freely soluble | Assay basis | 98.5–101.5% as histidine, dried basis | 99.0–101.0% as the salt, dried basis The table is not a ranking. Each form has a job, and the job is decided by the formula and by the label the brand intends to print. The catalog form is the free base; the hydrochloride is a different purchase with its own specification. ## pH, solubility and handling The free base is a zwitterion in water, not a strongly alkaline material. Its imidazole group has a pKa near 6.0, so a 1% solution sits at pH 7.0–9.0 and buffers in the mildly acidic range. That is a different behaviour from a strongly basic amino acid: the free base can be used in a blend without the aggressive neutralisation that a guanidino or primary amine side chain produces. The hydrochloride is acidic in solution, roughly pH 3.0–5.0 at 5%, and it is freely soluble where the free base dissolves to about 42 g/L at 25 °C. That solubility difference is the practical reason to choose the salt: a concentrated stock, a cold process or a formula that needs a clear solution may not tolerate the free base. The price of that solubility is the chloride load and the water of crystallisation, both of which travel with the salt into the formula. Both forms are hygroscopic to some degree. The free base is specified at loss on drying ≤0.5%, and an open pouch gains moisture in a humid room; the monohydrate has its water built into the crystal, but it can still pick up surface moisture. Keep both in the sealed pack and let a cold pack equilibrate before opening. ## What the form does to the dose The conversion is arithmetic. One gram of the hydrochloride monohydrate delivers about 740 mg of histidine, so a label that declares 500 mg of L-histidine needs 500 ÷ 0.740 = 676 mg of the monohydrate. The same 500 mg weigh-up of the salt delivers 370 mg of histidine, a shortfall of 26% against the declaration. Going the other way, a label that says 500 mg of L-histidine hydrochloride is declaring about 370 mg of histidine, not 500 mg. The hydrate matters. The anhydrous salt, CAS 645-35-2 at 191.62 g/mol, delivers about 810 mg of histidine per gram; the monohydrate delivers about 740 mg. A specification that says only “hydrochloride” does not say which one, and the 8.6% water of crystallisation is enough to move a dose outside its tolerance. Name the hydrate in the specification and report water or loss on drying on the certificate. The fill weight follows the arithmetic. A 500 mg capsule fill cannot deliver 500 mg of histidine from the salt: the salt needed for that dose weighs about 676 mg, and the chloride that comes with it is about 114 mg. A stick pack has more room, but the mass of the salt per portion is larger. Write the declared histidine figure, the form, the assay basis and the fill weight into the same document before the purchase order is placed. ## What to write into the specification - “L-histidine free base, CAS 71-00-1, C6H9N3O2; not the hydrochloride.” - “Assay 98.5–101.5% by HPLC on the dried basis; specific rotation −38.0° to −41.0° on the dried basis, with the solvent and concentration stated.” - “Loss on drying ≤0.5%; pH (1% solution) 7.0–9.0; chloride reported where the formula is salt-sensitive.” - “Particle size ≥95% through 40 mesh, or the agreed milled or granulated distribution.” - “Heavy metals and microbiology as on the catalog specification; lot code on the pack, the certificate and the retained sample.” If the material is the hydrochloride, every line changes: the name, the CAS, the molecular weight, the assay basis, the pH range, the water and the chloride. A specification copied from the free base and applied to the salt is not a specification; it is a template with the wrong noun. ## When the other form is the wrong answer Do not choose the hydrochloride when the label has to read “L-histidine” and the dose is expressed as histidine, unless the label is changed to match the salt. Do not choose the free base for a formula that needs a concentrated clear solution at low pH and cannot tolerate the lower solubility. Do not switch forms to fix a flow problem: mesh and granulation are the tools for flow, and changing the salt to solve a hopper creates a labelling problem instead. The catalog form is the free base at 40 mesh. The product hub carries the specification; the COA page shows how each line is reported; the free-base-versus-hydrochloride page works through the dose and label arithmetic; the stability page covers moisture and the pack; the compliance page covers the label name in each market. ### 02.1 L-histidine vs L-histidine hydrochloride: the salt, the assay and the label URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-histidine/grades/l-histidine-vs-histidine-hcl/ Reviewed: 2026-11-19 L-histidine free base and L-histidine hydrochloride are the same amino acid with different counter-ions and different masses. The free base is 155.15 g/mol and carries the whole mass as histidine; the hydrochloride monohydrate is 209.63 g/mol, of which about 74.0% is histidine, 16.9% chloride and 8.6% water. The salt dissolves more freely and gives an acidic solution; the free base gives a solution at pH 7.0–9.0. The assay percentages are calculated on different bases, so a 99% figure on one certificate does not mean the same thing as a 99% figure on the other. In one lineThe hydrochloride monohydrate is 74% histidine by mass, so a label written for the free base needs about a third more salt to deliver the same dose. ## Two forms, two sets of numbers The molecular weights do the work. The free base is C6H9N3O2 at 155.15 g/mol. The monohydrochloride monohydrate adds one HCl and one water, giving C6H9N3O2·HCl·H2O at 209.63 g/mol. The anhydrous hydrochloride, CAS 645-35-2, is 191.62 g/mol and carries no water of crystallisation. L-histidine free base against the hydrochloride monohydrate | Line | Free base | Hydrochloride monohydrate | CAS | 71-00-1 | 5934-29-2 | Formula | C6H9N3O2 | C6H9N3O2·HCl·H2O | Molecular weight | 155.15 | 209.63 | Histidine per 1,000 mg | 1,000 mg | 740 mg | Chloride per 1,000 mg | None added | 169 mg | Water per 1,000 mg | None of crystallisation | 86 mg | pH | 7.0–9.0 (1% solution) | 3.0–5.0 (5% solution) | Label name | L-histidine | L-histidine hydrochloride The table is stoichiometric; a lot's assay and moisture move each figure by a percent or two, so calculate from the certificate. The numbers are not a quality ranking. ## Solubility, pH and the chloride load The free base dissolves to about 42 g/L at 25 °C, and the solution sits at pH 7.0–9.0. That is not strongly alkaline: the imidazole ring has a pKa near 6.0, so the free base buffers around the mildly acidic range and is close to neutral in water. The hydrochloride is freely soluble and acidic, around pH 3.0–5.0 at 5%. A concentrated stock, a cold process or a clear liquid that cannot carry the free base's solubility limit is where the salt earns its place. Solubility is not the same as absorption, and it is not a reason by itself to change the label. What the salt buys is process room: more grams dissolve per litre and the solution starts acidic. What it costs is the chloride load and the water of crystallisation. At a 500 mg histidine dose the monohydrate brings about 114 mg of chloride, which matters in a low-sodium or chloride-sensitive formula and in a label that declares salt rather than histidine. Neither form is a drop-in for the other in an existing formula, and solubility is not a reason to change the label by itself. ## The dose arithmetic and the hydrate The conversion factor for the monohydrate is 155.15 ÷ 209.63 = 0.740. To declare 500 mg of histidine, weigh 500 ÷ 0.740 = 676 mg of the monohydrate. To declare 1,000 mg, weigh 1,351 mg. Going the other way, 1,000 mg of the monohydrate is 740 mg of histidine, and 500 mg of the salt is 370 mg of histidine. The anhydrous salt changes the factor to 155.15 ÷ 191.62 = 0.810. A specification that says only “hydrochloride” does not say whether the water is there. If the label arithmetic is built on the anhydrous factor and the drum contains the monohydrate, the same weigh-up delivers about 8.6% less histidine. Name the hydrate, report water or loss on drying, and use the certificate's figure rather than the theoretical one. The assay basis adds a second correction: the free-base assay is calculated as histidine, the hydrochloride assay as the salt on the dried basis. A 99.0% salt assay is about 73.3% histidine after the salt factor, so the two percentages are not comparable without the conversion. ## What the assay line actually measures The free-base certificate reports 98.5–101.5% by HPLC on the dried basis. The hydrochloride certificate reports 99.0–101.0% as the salt on the dried basis, with water, chloride and pH beside it. The reference standard and the calculation differ, so the certificate should say which material the percentage refers to. The rotation is the enantiomer check, and it is solvent-dependent. The free base in water reads about −39°, while the pharmacopoeial method for the same L form in 6 N hydrochloric acid reads about +12.6° to +14.0°. A salt certificate quoting the free-base window, or a free-base certificate quoting the acid window, is mixing two methods. The pH line is the quick form check: a free-base lot at pH 4 or a hydrochloride lot at pH 8 is a finding, not a rounding error. Chloride is the direct counter-ion measurement. The free-base monograph limits chloride to 0.05%; the monohydrate carries about 16.9% by theory. A blend of the two forms lands in between, in proportion to the salt fraction. When the form is disputed, chloride plus pH plus water is stronger evidence than the assay percentage alone. ## What the label has to say In the EU, the ingredient list must name the form as it appears in the specification: “L-histidine” for the free base, “L-histidine hydrochloride” for the salt. The quantity per portion follows the form that is named. A label that says L-histidine while the drum contains the hydrochloride has two defects: the name is wrong, and the declared quantity overstates the histidine by about 26% of the salt's weight. In the United States, the Supplement Facts panel declares the amount per serving, and the ingredient list carries the source. If the source is the hydrochloride, both have to agree on what the milligram figure refers to. L-histidine has no Daily Value, so no percentage is shown. A structure or function statement needs the DSHEA disclaimer and substantiation; a disease claim is not permitted. The label ingredient is L-histidine, not a histidine-containing dipeptide such as carnosine; the claim review is separate and belongs on the compliance page. ## When to choose which Choose the free base when the label has to say “L-histidine”, the dose is expressed as histidine, and the formula can carry pH 7–9. Choose the hydrochloride when the label names the salt, the dose is expressed as the salt, the formula needs a freely soluble ingredient at acidic pH, and the chloride is acceptable. If the label names the free base but the formula needs the salt's solubility, change the label or the formula; do not swap the drum and adjust the number afterwards. The product hub carries the catalog free base; the grades page sets the form question in the wider range; the COA page shows the assay and rotation lines; the identity page explains how the base is distinguished from the salt; the methods section describes the chromatographic work, and the quality page covers release. ### 03 L-histidine stability: moisture, heat and trace metals URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-histidine/stability/ Reviewed: 2026-11-19 L-histidine is chemically stable as a dry solid in a sealed pack, but it is hygroscopic and its imidazole ring is a reactive handle. Moisture, heat and trace transition metals drive the main changes: loss on drying climbs, the white powder takes on a cream or tan tint, and related substances grow. In solution the list is longer — pH, oxygen, metal ions and reducing sugars all act at once. The pack and the storage condition decide how long the material stays inside its specification; the certificate only describes the lot at release. In one lineL-histidine is stable as a dry solid, but moisture, heat and trace metals drive its main degradation routes; the pack and the storage condition set the shelf life. ## The dry solid: moisture, colour and caking The catalog sets loss on drying at ≤0.5%. That limit is a release gate, not a storage allowance: the free base is hygroscopic enough that an open pouch gains water in a humid room, and a caked powder no longer flows or disperses evenly. Colour is the second signal. A cream or tan tint on a white crystalline powder points to oxidation or to a reaction with a reducing sugar, and it can appear while the assay is still inside its window. The drier and the contact surfaces matter: a dryer that runs hot, or a powder that sits on a mild-steel surface, can start a colour change that the certificate never sees. Microbial control belongs with moisture control. Histamine is one decarboxylation step from L-histidine, so a wet powder has a route to a related substance the assay will not show. The catalog has no histamine limit; write one into the specification if the destination or customer needs it. ## In solution: pH, oxygen and metals The free base gives a solution at pH 7.0–9.0, and the imidazole group buffers near pH 6. That makes the solution sensitive to the matrix pH and to dissolved oxygen. Histidine oxidises to 2-oxo-histidine, a reaction that trace copper or iron accelerates, and light can raise the rate when a sensitiser is present. A clear bottle on a bench is the wrong container for a hold. Reducing sugars are the other solution route. The α-amino group reacts with glucose, maltose or a reducing carrier under heat, and the result is browning and a loss of histidine that the assay will eventually show. A ready-to-drink process adds a heat load through pasteurisation or hot fill; a powder stick avoids that step because the consumer adds water at the point of use. If a liquid is unavoidable, protect it from light, control the pH, keep dissolved oxygen low, and validate the hold time before filling. A bulk-powder stability result does not transfer to a beverage: the matrix, the process and the pack each change the rate. ## What drives degradation Factors that move L-histidine during storage | Factor | Effect | Control | Moisture | Caking; raises loss on drying; enables hydrolysis and microbial growth | Sealed pouch or lined drum; low-humidity filling room | Heat | Faster oxidation, browning and colour change | Cool store; set process time and temperature on the real matrix | Trace metals | Catalyse oxidation to 2-oxo-histidine; colour shift | Avoid iron and copper contact; specify metal limits | Oxygen | Oxidation in solution and at exposed surfaces | Low headspace; sealed pack; process control | Reducing sugars | Maillard browning with the amino group | Low free-sugar carriers; check the blend at process temperature | pH | Changes solution stability, colour and the form's charge | Validate the matrix pH; buffer if needed | Microbiology | Decarboxylation to histamine in a wet powder | Moisture control; microbiology limits; histamine line if required These factors combine: a warm, humid store is worse than the sum of the individual effects, and the useful question is not “is L-histidine stable?” but “stable in which pack, at which condition, for how long?” ## A stability protocol for the packed material Run the study on the packed powder, not a laboratory jar. Use both catalog packs, add an open-pack condition to measure pickup in the filling room, and store at 25 °C/60% relative humidity, 30 °C/65% and 40 °C/75%. Add a light-exposure arm if the pack is transparent or the powder will be held in an open dish. Test assay, loss on drying, pH of a 1% solution, specific rotation, appearance and colour, related substances and microbiology at each point. The rotation should stay inside its window if the L form is intact; a drift needs a chiral check, not a second assay. Photograph the colour against a standard, because “slightly darker” is not a result. Add a stressed sample of the real blend: a reducing-sugar carrier held at process temperature will show browning before the assay moves, and a capsule or tablet will show moisture transfer through the shell. That trial is more informative than a second assay on the same powder. ## The finished formula changes the answer A capsule or tablet has low water activity, but the shell and the excipients can still transfer moisture. Check loss on drying at release and after storage, and check the appearance of the fill. A powder blend is the more demanding case: a reducing-sugar carrier, an acidic flavour or a metal-containing colourant can each start a reaction inside the sealed pouch, and the blend's pH should be checked after a week rather than only on the day of mixing. A beverage combines pH, oxygen, heat and light: the free base buffers near pH 6, while the hydrochloride shifts the starting pH down and brings chloride. A gummy or chew adds water and heat, so the reducing-sugar load and process temperature join the question. The bulk stability is the starting point, not the answer. ## How the shelf life is assigned We do not publish a single shelf-life number for L-histidine, because the pack and the storage condition set it. A 24-month retest period is common for the intact 1 kg pouch and 25 kg drum, but the number has to come from packed-product data on the same pack, liner and closure. Accelerated data supports the assignment; it does not replace real-time results at the label condition. After the retest period, re-assay the retained sample before extending use. Do not carry a bulk figure across to a repacked container. The early warnings are loss on drying climbing, lumps, a cream or tan tint, a pH that has moved, and a related-substance peak that has grown; any should trigger a retest. The catalog form and pack are on the product page; the test lines are on the COA page; the form comparison is on the grades page; the ordering options are on the MOQ page. The methods section describes the assay, and the quality page covers release, retest and retained samples. ### 04 L-histidine: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-histidine/moq/ Reviewed: 2026-11-19 L-histidine free base starts at 1 kg in a foil pouch taken from a released lot. Bulk orders use 25 kg fiber drums. Stock ships in 1–7 days, and the quotation depends on six inputs, beginning with the exact form and specification. A milled or granulated grade, a particular document pack or a quantity beyond packed stock is scheduled separately and confirmed in writing. In one lineOne kilogram drawn from a released lot is the qualification unit; the form, the pack, the destination and the documents shape the quotation. ## Why the minimum is one kilogram One kilogram covers a bench trial, a pilot batch, a laboratory sample and a retained portion without committing the buyer to a drum. It can also come from a single released lot, so trial material and production material can be traced to a common origin. A 25 kg minimum would force an inventory decision before the formula is settled; the pouch keeps qualification and scale-up apart. The pouch is a commercial unit with a lot code, not a scoop from a bulk drum. Below 1 kg, material is normally split from a larger lot and repacked, which adds handling and weakens traceability without changing the chemistry. The drum lowers handling per kilogram; it also commits storage time. ## The two packs and what goes on them Catalog packs for L-histidine free base | Pack | Construction | What it is for | 1 kg pouch | Foil pouch with an inner liner and a closure | Trial, sample, small batch, retain | 25 kg drum | Fiber drum with an inner liner | Production; the liner is the moisture barrier | Granulated grade | On request; same chemistry, different particle profile | Flow and dust control on a filling line | Label fields | Product, form, lot code, net mass, manufacture and retest dates, storage statement | Ties the pack to the certificate The pouch is the trial and retain pack; the drum is the production pack, and it depends on its liner rather than the lid alone. Once a drum is opened, fold the liner and refit the lid. If usage is slow, buy the pack size that matches the consumption rate. The standard powder passes 40 mesh at 95% or more. Granulation is a separate specification: it changes flow and dust, not chemistry. Raise it before the quotation because it can move the schedule. ## Lead time and dispatch Stock is quoted at 1–7 days from acknowledgement. The count starts once the form, specification, quantity and destination are fixed. Ask for the dispatch date as well as the lead time; the freight mode and the Incoterm decide who books the transport and who clears the entry. Custom mesh or granulation, extra documents, a specific label language or a quantity beyond packed stock each add time. The date is confirmed in writing; an enquiry does not reserve material. A 25 kg drum may travel on a pallet and a 1 kg pouch as a parcel, so the pack plan belongs in the same conversation as the delivery date. ## The six details a quotation needs - Form and CAS. L-histidine free base, CAS 71-00-1, with the specification revision and the mesh. - Quality lines. HPLC assay and basis, loss on drying, pH, specific rotation, particle size, heavy metals and microbiology. - Quantity and pack split. Total kilograms and the pouch-to-drum mix. - Destination and Incoterm. Country, delivery point and trade term. - Documents. COA, specification, SDS and any market statement the importer needs. - Use and market. Supplement, food or another use, and the country where it will be sold. Without the form, the hydrate question and the market, a reply is only a range. The same lot can fit one destination and not another, and the paperwork is part of the offer. Commercial terms are stated on the quotation, not here. ## The sample is a lot, not a demonstration The 1 kg pouch is the qualification unit. Check identity, assay, moisture, pH and microbiology, and retain a portion from that same pack; the lot code must tie the sample, the COA and the quotation together. A smaller bench quantity is a repack rather than the catalog pack, and it needs its own traceability note. Do not assume that the trial material and the production drum share a lot. Ask which lot the sample came from, and keep the retained portion under the same conditions as the production pack. If the later drum carries a different code, the trial was run on different material even when the specification is identical. ## Terms to settle before the first order Write the form, specification revision, mesh, pack, lot-code rule and per-lot documents into the purchase order. Add the receipt tests the buyer will run, the retest date and the route for an out-of-specification result. Three clauses prevent most arguments: a change-control clause covering source, site, route, mesh and pack; a certificate clause confirming that every lot has its own COA; and a non-conformance clause setting out the remedy, the return and the retained-sample responsibility. A quality agreement is easier to sign before the first production order than to negotiate after a dispute. Payment terms and the Incoterm sit in the quotation; the delivery date sits in the acknowledgement. Neither replaces the specification. The product page carries the catalog form; the COA page shows the test lines; the stability page covers storage; the compliance page lists market documents. The MOQ note, the retained-sample note and the quality page define the terms used here. ### 05 The regulatory file for L-histidine URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-histidine/compliance/ Reviewed: 2026-11-19 L-histidine is an amino acid ingredient, not a vitamin or a mineral, so the EU food-supplement directive does not place it on the harmonised vitamin and mineral lists; member states may set the level and notification rules. In the United States it is sold as a dietary ingredient, Great Britain applies the retained framework, and Northern Ireland follows the EU. This page sets out the instruments, the contaminant arithmetic, the label questions and the documents; it does not decide the route for a destination, which the buyer's regulatory team confirms against the current text. In one lineNo single amino-acid approval covers every market: the file has to show the form, the route, the contaminant margin and the label for the destination. ## Three markets, three instruments One certificate can satisfy one market and fail another; the table names the main instruments and what each settles. The current consolidated text is the reference. Which instrument controls what · L-histidine | Market | Main instruments | What they settle | European Union | Directive 2002/46/EC; Regulations 1169/2011, 1924/2006, 2015/2283 and 2023/915 | Supplement framework, labelling, claims, novel-food history and contaminants | United States | FD&C Act as amended by DSHEA; 21 CFR 111 and 101.36 | Dietary ingredient status, cGMP, Supplement Facts | United Kingdom | Retained food law and the Food Supplements Regulations 2003; Food Information Regulations 2014 | Permission and labelling in Great Britain; Northern Ireland follows the EU This is a sourcing reference, not legal advice; the destination and the finished-product route decide the file. ## The European Union: outside the vitamin and mineral lists Annexes I and II to Directive 2002/46/EC list the vitamins and minerals permitted in food supplements; L-histidine is neither. The Directive still sets the labelling particulars, but the permission and the level for an amino acid come from general food law and the member state where the product is sold. Some member states set a maximum, require a notification or restrict a form; there is no single EU answer to “how much is allowed”. The novel-food question turns on documented use before 15 May 1997; the file should carry the evidence rather than the conclusion, and the buyer's regulatory team confirms the position. Labelling follows Regulation (EU) No 1169/2011 and the supplement particulars in the Directive. L-histidine has no Nutrient Reference Value in Annex XIII, so no percentage of an NRV can be shown. Great Britain applies the retained framework and Northern Ireland the EU rules under the Windsor Framework. ## The United States: a dietary ingredient under DSHEA L-histidine is sold in the US as a dietary ingredient under section 201(ff) of the FD&C Act. For an amino acid with a pre-1994 history, the basis is normally the pre-1994 marketing route, not a new dietary ingredient notification; the supplier's file should name the basis, and the buyer confirms that it covers the finished product. Under 21 CFR 111 the manufacturer must test the identity of each component on receipt. The Supplement Facts panel is set by 21 CFR 101.36: it declares the amount of L-histidine per serving, and because the amino acid has no Daily Value, no percentage is shown. A structure or function statement needs substantiation and the DSHEA disclaimer in 21 CFR 101.93; a disease claim is not permitted, and the FDA does not approve a label before marketing. ## Contaminants: specification against law The heavy-metal lines are specification terms, and three of them coincide with a legal maximum. A limit set at the maximum leaves nothing for analytical uncertainty, so the file should show the margin. Catalog limits and the EU position for food supplements | Parameter | Catalog limit | EU legal position, as of this review | Lead (Pb) | ≤3 mg/kg | 3.0 mg/kg maximum; the catalog sits at the line | Cadmium (Cd) | ≤1 mg/kg | 1.0 mg/kg maximum; the catalog sits at the line | Mercury (Hg) | ≤0.1 mg/kg | 0.10 mg/kg maximum; the catalog sits at the line | Arsenic (As) | ≤2 mg/kg | No harmonised EU maximum for supplements; the line is contractual The limits apply to the finished supplement, not only the ingredient: a compliant powder can still exceed a limit if the daily dose is high or other ingredients add metals. In the US there is no federal lead maximum; California's Proposition 65 assesses exposure per daily dose, with a maximum allowable dose level of 0.5 µg/day for lead. Histamine is not a heavy metal, but it belongs in the file: it is one decarboxylation step from L-histidine, and a general related-substances test may not quantify it. If a histamine limit applies, write it into the specification with a method and a result. For the hydrochloride, add the chloride and water lines; the label name and dose depend on the salt form. ## Claims and the label In the EU and the UK, health claims are governed by Regulation (EC) No 1924/2006 and its retained equivalents, and a claim must appear in the register before use. As of this review the EU register carries no authorised health claim for L-histidine. A compositional statement such as “L-histidine 500 mg per capsule” describes the product, and the figure has to match the specification. In the US the structure or function route is open with the disclaimer and rests on substantiation held by the brand owner; it does not extend to a disease. The same wording cannot be carried into the EU or the UK, where the register decides. The declared quantity follows the form. If the drum contains the hydrochloride and the label says “L-histidine”, the declaration overstates the histidine by about 26% of the salt's weight. The grades page and the free-base-versus-hydrochloride page work through that arithmetic. ## What the file must contain - A batch certificate that names the method and basis for each result, with the lot code matching the pack. - The versioned specification it was released against, naming the form and the mesh. - A safety data sheet, an allergen statement and a site and country-of-origin statement. - A novel-food statement that documents the pre-1997 use, not just the conclusion. - A US dietary-ingredient statement, or a notification for a genuinely new form. - A food-contact declaration for the pouch and liner, and a histamine statement where a limit applies. - A stability summary, the assigned retest period and any halal or kosher certificate. ## A short review checklist - Name the market, and for the EU the member state of sale. - Confirm that the specification and label name the free base, not a blend or a salt. - Check the destination's level rule and notification requirement, not only the EU position. - Compare each contaminant limit with the legal maximum and write down the margin. - Test the claim wording against the EU or GB register, or the US substantiation file. - Keep the specification, the certificate and the label on the same version and lot code. The framework for each market is set out on the EU regulatory page, the US page and the UK page. The release tests are on the COA page; the identity evidence is on the identity page; the product page carries the catalog specification; the quality page describes the release file. ### 06 How we prove an L-histidine lot is the free base URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-histidine/identity/ Reviewed: 2026-11-19 Identity for L-histidine is proven in layers, not by one number. The document set ties the lot to a specification; IR establishes the functional groups; HPLC confirms the retention and the peak; the specific rotation establishes the L configuration; and pH, chloride, water and the assay establish whether the powder is the free base or a salt. The layers have to agree. A clean assay with no rotation has not shown the L form, and a rotation with no pH or chloride has not shown the free base. In one lineIdentity is a set of agreeing measurements: IR and HPLC name the molecule, rotation fixes the L form, and pH with chloride separates the free base from the salt. ## The five identity layers A certificate can name the right material and still fail to prove it. Each layer below answers a separate question and needs its own evidence; a supplier who answers only the first has described the paperwork. What each identity layer proves and misses | Layer | Test | What it proves | What it misses | Document | Specification, COA, lot code | The lot is described and traceable | Whether the drum matches the paper | Spectrum | IR against a reference; HPLC retention | The functional groups and the chromatographic peak | Purity, and a close analogue | Chiral | Specific rotation; chiral HPLC | The L configuration, and a gross excess of the D form | A small enantiomeric impurity inside the method's uncertainty | Form | pH, chloride, water | Free base or hydrochloride | Which hydrate, without the water line | Quantitative | Assay, loss on drying, related substances | How much histidine is present, and what dilutes it | A non-chromophoric organic at low level The layers are not interchangeable: IR can match while the rotation is low, and the assay can pass while the pH says hydrochloride. A useful certificate carries all five. ## Chloride, water and the salt ratio The free base and the hydrochloride differ by a counter-ion and, in the commercial salt, one molecule of water. The monohydrate is C6H9N3O2·HCl·H2O at 209.63 g/mol: about 74.0% histidine, 16.9% chloride and 8.6% water by theory. The ratio is stoichiometric, so it does not move with the assay. The free-base monograph limits chloride to 0.05%, which is the other end of the same scale. That ratio is a direct form check: a lot sold as the free base with 16% chloride is the salt, whatever the assay says, and a hydrochloride with low chloride and low water is a blend or a different hydrate. A blend lands between the endpoints in proportion to the salt fraction, and the pH moves with it: the free base sits at 7.0–9.0 in a 1% solution, the hydrochloride at 3.0–5.0 in a 5% solution. The water line also names the hydrate. The anhydrous hydrochloride, CAS 645-35-2 at 191.62 g/mol, carries no water of crystallisation and delivers about 81.0% histidine. A specification that says only “hydrochloride” leaves an 8.6% mass difference open, enough to change a dose; report water or loss on drying, and name the hydrate. ## XRD and the crystalline solid X-ray diffraction asks a different question: is the solid crystalline, which pattern is present, and does it match a reference? It can distinguish a crystalline salt from an amorphous dilution, and it can compare lots from two sources. It is not a purity assay and it does not measure the counter-ion. Ask for the reference pattern and the detection limit before reading a “match” statement. L-histidine is polymorphic: the literature describes at least two forms, A and B, and the crystallization route decides which appears. A polymorph change can alter dissolution, flow and tablet behaviour without changing the assay. If a supplier claims a specific solid form, XRD answers the question. For a disputed lot, XRD plus chloride plus HPLC is stronger than any one of them. XRD is not a routine release test, and a certificate that reports only “XRD conforms” without the pattern has added little. It is most useful when the question is the solid form rather than the amount. ## The adulterants that fit the assay Common substitutions and the lines that catch them | Adulterant | Why it can pass a rough check | What catches it | L-histidine hydrochloride | Contains histidine; the mass is higher per unit of histidine | pH; chloride; water; IR | D-histidine or a racemate | Same formula and mass; same assay | Specific rotation; chiral HPLC | Other amino acids | Similar acid–base behaviour and ninhydrin response | HPLC profile; rotation; IR | Histamine | Close structure; one decarboxylation step away | LC-MS/MS or a specific related-substances method | Water | Corrected out of a dried-basis assay | Loss on drying; as-is calculation | Mineral diluent | Adds mass without contributing to the peak | Residue on ignition; chloride; mass balance The hydrochloride is the most plausible substitution because it is a legitimate material with a legitimate certificate. Residue on ignition does not catch it: the chloride is lost on ignition, and the ash can stay low. pH and chloride separate the salt from the base, so a chloride line belongs in the specification even though the catalog certificate does not carry one. Other amino acids are caught by the chromatogram, not the percentage; proline is a useful system-suitability marker, and glycine is a common diluent. Water is the simplest diluent: a wet lot can pass a dried-basis assay while the as-is powder contains less histidine, so read loss on drying with the assay. ## How to write the identity block - “L-histidine free base, CAS 71-00-1, C6H9N3O2; not the hydrochloride.” - “Identification: IR conforms to reference, technique stated; HPLC retention conforms.” - “Assay 98.5–101.5% by HPLC on the dried basis; method, column and detection named.” - “Specific rotation −38.0° to −41.0° on the dried basis; solvent, concentration and temperature stated.” - “Loss on drying ≤0.5%; pH (1% solution) 7.0–9.0; chloride reported for each lot.” - “Related substances, including histamine, below the agreed limits; heavy metals and microbiology as on the catalog specification.” - “No added amino acids, salts or diluents; particle size ≥95% through 40 mesh or the agreed distribution.” The composition statement turns identity into a specification. Make it part of the signed specification, not a later note, and state the chloride and histamine lines. ## Five questions for the supplier - Is this the free base or the hydrochloride, and which hydrate does the specification name? - What are the specific rotation and its conditions, and what is the assay basis? - What are the pH, chloride and water results for this lot? - Can you send the HPLC chromatogram and the IR spectrum, not only the table of results? - What are the histamine result and its limit, and which lot code ties the certificate to the drum? The five replies should line up with the certificate and with each other. The product page carries the catalog specification; the COA page shows where each test sits; the grades page covers the form; the free-base-versus-hydrochloride page works through the label arithmetic; the methods section explains the chromatogram, and the quality page covers the retained-sample chain. ### 01 What the COA for L-methionine actually contains URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-methionine/coa/ Reviewed: 2026-11-19 An L-methionine certificate carries nine routine lines: appearance, identification, HPLC assay, specific rotation, loss on drying, pH, heavy metals, microbiology and particle size. The rotation is what tells the buyer that the powder is the L enantiomer and not a racemate, while the assay only says how much methionine is present. A certificate without the rotation has not established the form. In one lineThe assay says how much methionine is in the pack, and the specific rotation says which enantiomer it is; a percentage without the rotation has not identified the material. ## The certificate as a test report Every row of a release certificate needs three things: the parameter, the method behind the number, and the limit the lot had to meet. When a row says only “conforms”, the reader is left with a conclusion and no measurement. The table below lists the catalog limits; the lot certificate applies them to one pack. Parameters, methods and catalog limits · L-methionine | Parameter | Method | Release limit | Appearance | Visual | White crystalline powder | Identification | IR and HPLC against a reference | Conforms | Assay | HPLC | 98.5–101.5% | Specific rotation | Polarimetry at 589 nm | +21.0° to +23.0° (dried basis) | Loss on drying | Gravimetric | ≤0.5% | pH (1% solution) | Potentiometry | 5.0–7.0 | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh The identification row and the rotation row matter most. Identification has to name the technique, because a tick does not say whether IR was run against a reference. The rotation is the only routine test that responds to chirality. ## The dried basis, the rotation conditions and the pH The catalog assay is 98.5–101.5% and the moisture gate is ≤0.5%. With so little water, the as-is and dried results sit close together: 99.0% as-is at 0.4% moisture becomes 99.4% dried. Close is not identical, though, and the certificate must state which basis the percentage uses. Rotation is expressed on the dried basis, so the laboratory corrects the reading for moisture. That correction can only be repeated if the certificate records the measurement conditions: 589 nm, temperature, solvent, concentration and cell path. Amino acid rotations shift with solvent and pH, which means a figure without conditions cannot be compared across laboratories. The HPLC method deserves a line of its own. Methionine has no useful chromophore, so the assay either runs at low UV wavelength or adds a derivatisation step, and the certificate should say which. Neither approach separates L from D on a conventional column; both forms elute together, so the percentage is total methionine. pH is a secondary check. A 1% solution sits at 5.0–7.0, close to the isoelectric point of about 5.7 for the zwitterion. Above the window, residual base or a salt is likely; below it, residual acid. ## Release limit versus batch result A release limit is a boundary, not a measurement. The certificate needs the boundary and the measured result in separate columns, each tied to its method. Copying the range into the result column leaves nothing to audit. What belongs in the result column | Parameter | Release limit | Result entry | Assay | 98.5–101.5% by HPLC | A measured percentage, with the basis named | Specific rotation | +21.0° to +23.0° dried basis | The reading, with solvent, concentration and temperature | Loss on drying | ≤0.5% | A measured percentage | Heavy metals | Per element | One figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot The conclusion “passes” should be reachable from the numbers. Microbiology needs a count and an absence statement, heavy metals need one figure per element, and rotation needs the reading plus its conditions. A heavy-metal total hides the element that fails. ## What moves between batches Drying, neutralisation and milling each leave their mark on a different line: moisture, pH and particle size. The 40 mesh figure describes the finishing step, so a new mill can change it while the chemistry stays put. Assay drifts little; rotation should not drift at all. A reading that falls toward zero points to racemisation in a hot or alkaline process, or to blending with the racemate. A reading above the range is usually a method difference, so confirm solvent and temperature before rejecting the lot. Look for a small extra peak just before the main one. It can be methionine sulfoxide, the oxidation product that builds up in a lot dried hard or stored warm. No sulfoxide limit is set in the catalog, so a trace peak is not a rejection by itself; a rising trend across lots is the reason to request chromatograms. A colour change is the least reliable clue of all. Pouch, drum, certificate and retained sample should all carry the same lot code. Without that link, the certificate describes a material rather than a released pack. ## When to order an outside test An outside test is worth ordering for a new source, a first entry into a regulated market, a disputed rotation, or a chromatogram with an unidentified peak. A sensible panel is polarimetry with full conditions, chiral HPLC or GC for D-methionine, HPLC assay, IR, moisture, ICP-MS and microbiology. When identity is in question, add sulfur by combustion analysis or ICP-OES. The molecule contains 21.5% sulfur, so a much lower result suggests a non-sulfur diluent. Ask for detection and quantitation limits too; “not detected” means little without them. Keep the chain of custody intact. Test the sample that was retained, and make sure the report names the lot and the pack. If a result is challenged, send the referee the retained sample and ask for tests that discriminate between the forms. ## What to compare between suppliers Compare seven things across suppliers: CAS number and form; assay and basis; rotation and its conditions; moisture and pH; heavy metals and microbiology; mesh; and the document set. Agreement on assay alone does not prove the powders match. Traceability comes next: manufacturing site, process route, packing step, and a lot code that appears on the certificate, the pack and the retained sample. Catalog limits are on the L-methionine product page. The tests that distinguish L from DL are on the identity page and the L versus DL comparison. Method detail is in the methods library and the HPLC method note; release practice is on the quality page. ### 02 L-Methionine grades: enantiomer, assay and particle size URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-methionine/grades/ Reviewed: 2026-11-19 L-Methionine is sold as the enantiopure amino acid, and the grade decision has three parts: the enantiomer, the assay and the particle. The catalog grade is 98.5–101.5% by HPLC, with a specific rotation of +21.0° to +23.0° on the dried basis and ≥95% through 40 mesh. The enantiomer question is a different-substance question and is compared on its own page; the assay and the particle are handling decisions on the same substance. In one lineThe grade decision has three layers: the enantiomer decides what the substance is, and the assay and the particle decide how it handles. ## Why L-methionine has more than one grade A grade is a specification a buyer can release against, not a rank order of quality. The word “methionine” on a quotation can hide three separate decisions, and each one changes a different part of the paperwork. The first is the enantiomer. L-Methionine (CAS 63-68-3) and DL-methionine (CAS 59-51-8) are different substances with different certificates, different rotations and different label names. No assay figure or particle size turns one into a grade of the other; that comparison belongs on the L versus DL page. The second is purity: the catalog range is 98.5–101.5% by HPLC on the stated basis, with loss on drying at ≤0.5%. A narrower assay is a specification change, not a different molecule. The third is the physical grade. A 40 mesh powder, a granulated powder and a powder diluted on a carrier can carry the same assay and the same rotation, and they behave differently in a capsule line, a tablet press and a blend. ## The grades and what changes L-Methionine grades and what a buyer signs up for | Grade | What it is | Where it fits | What changes | Catalog powder | Free L-methionine, 98.5–101.5%, ≥95% through 40 mesh | Capsules, tablets and blends where a fine powder is workable | The baseline specification | Granulated | The same material, agglomerated to a coarser particle | High-speed capsule and tablet lines; blends that must not dust | Particle distribution, bulk density and flow; assay and rotation stay | Dilution | L-Methionine on a declared carrier | A lower potency per gram for a small-dose premix | Assay per gram, carrier declaration, particle size | DL-Methionine | The 1:1 racemate, CAS 59-51-8 | Feed and other markets that name the racemate | The substance, the rotation and the label The last row is not a grade of L-methionine. It is in the table because a quotation may use the same word for both, and the first question to ask is which CAS number will appear on the certificate. The first three rows are the same substance at different assay levels and particle sizes. ## Particle size, flow and the 40 mesh line Forty mesh is about 420 µm, and “≥95% through” allows up to 5% to be retained on the sieve. The catalog powder is therefore a fine crystalline solid, not a dust-free granule. It disperses well in a blend, and it also dusts, carries static and can segregate from coarser excipients in a hopper. Granulation changes the particle without changing the chemistry. The particles become larger and rounder, bulk density and flow improve, and the dust falls. The assay, the rotation and the identity tests are the same tests on the same molecule, but the particle-size line and the bulk density belong to the granulated grade and should be written for it. A certificate that carries the 40 mesh line while the drum holds a granulated powder is describing the wrong grade. Match the particle size to the blend, not only to the process. A fine amino acid in a coarse blend can separate in a hopper or a stick-pack line, and the fill weight will drift even when every component is within specification. Ask for the distribution, not only the pass figure. Comparisons with other amino acids do not transfer either: glycine is freely soluble and sweet, while methionine is less soluble and carries a sulfurous note, so a particle and taste decision made for glycine is not a decision for methionine. ## Capsules, tablets and powder blends A capsule or a tablet takes the solid powder, and the choice between the catalog powder and the granulated grade is a flow decision. Direct compression and high-speed encapsulation usually prefer the granulated grade; wet granulation can start from the fine powder because the process builds its own granules. The fill weight is set by the label: a capsule that declares 500 mg of L-methionine needs 500 ÷ 0.992 = 504 mg of a lot that assays 99.2%, and 508 mg of a lot at 98.5%. The label declares the amino acid; the balance weighs the powder. A powder blend or a stick pack takes the fine powder for dispersion, and the taste is a formula question. Methionine has a sulfurous note that is noticeable in an unflavoured drink, and granulation does not remove it. A dilution can lower the potency per gram, but it adds a carrier that the label has to declare. The dosage form does not change the specification of the molecule. A capsule, a tablet and a stick pack all need the same assay, identity and rotation; they differ in the particle, the carrier and the fill arithmetic. Write the grade into the purchase order as well as the product name, because “L-methionine” alone does not say which powder is being bought. ## What to write into the specification - “L-Methionine, CAS 63-68-3, C5H11NO2S.” - “Assay 98.5–101.5% by HPLC; the certificate states the basis.” - “Specific rotation +21.0° to +23.0° on the dried basis, with solvent and temperature named.” - “Identification by IR and HPLC against a reference.” - “Loss on drying ≤0.5%; pH (1% solution) 5.0–7.0.” - “Particle size ≥95% through 40 mesh, or the granulated grade's distribution and bulk density.” - “Heavy metals and microbiology as listed; the carrier declared if the grade is a dilution.” - “Destination market and the label form confirmed before the order.” ## When the grade is the wrong choice A dilution is the wrong choice when the label declares the pure amino acid and the carrier is not on the panel. A granulated grade is the wrong choice when the process needs a fine powder for a suspension, because the coarser particle takes longer to disperse. A finer mesh is not automatically better: it adds dust and handling, and the blend may not need it. The grade belongs in the specification before the artwork and the purchase order are fixed. The product hub carries the catalog specification; the COA page shows how each grade is released; the MOQ page covers packs and lead time; the identity page covers the tests that hold across the grades. ### 02.1 L-methionine vs DL-methionine: the enantiomer, the assay and the label URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-methionine/grades/l-methionine-vs-dl-methionine/ Reviewed: 2026-11-19 L-Methionine (CAS 63-68-3) is the single enantiomer; DL-methionine (CAS 59-51-8) is the 1:1 mixture of the L and D forms. They share the formula C5H11NO2S and the molecular weight 149.21, but the L form rotates light at +21.0° to +23.0° on the dried basis while the racemate has no net rotation. A 99% DL assay is about 49.5% L-methionine. In one lineThe two names describe different substances: the L form rotates light, the racemate does not, and a gram of the racemate carries about half a gram of L-methionine. ## Two names, two CAS numbers The constitutional formula is the same: an amino group, a carboxyl group, a methylthio ether and a five-carbon chain, C5H11NO2S, molecular weight 149.21. What differs is the arrangement at the α-carbon, which carries four different groups. L-Methionine has one arrangement, D-methionine its mirror image, and DL-methionine is the 1:1 mixture. Only two of the three are common commercial items. L-Methionine and DL-methionine side by side | Property | L-Methionine | DL-Methionine | CAS number | 63-68-3 | 59-51-8 | Formula | C5H11NO2S | C5H11NO2S | Molecular weight | 149.21 | 149.21 | Composition | The L enantiomer | 1:1 L and D | Specific rotation | +21.0° to +23.0° (dried basis) | About zero | What a 99% assay covers | 99% L-methionine | 99% total methionine, about 49.5% L | Common commercial use | Food, supplements and pharmaceutical use where the L form is named | Feed and large-volume industrial use | Label name | L-Methionine | DL-Methionine D-Methionine (CAS 348-67-4) is the third name and not a synonym for either of the others. It is the mirror image of the L form, it rotates light in the opposite direction, and it is not a common supplement ingredient. A quotation that says “methionine” without a name has not specified a material. ## The rotation that separates them Specific rotation is measured with a polarimeter at 589 nm and reported with the solvent, concentration and temperature. For a mixture of the two enantiomers the observed rotation is the weighted sum of the contributions, so the figure maps onto composition. The L form reads +21.0° to +23.0°, the D form about the same magnitude with the opposite sign, and the racemate close to zero. A low rotation is not a “half-strength” lot. A lot reading +11° on the same conditions is about 75% L and 25% D, because the D quarter cancels part of the L rotation; a lot at +16.5° is about 87.5% L. A pure L lot diluted with a non-chiral excipient would keep its rotation and lose assay. A low rotation means lost enantiomeric purity, not lost concentration. Polarimetry is a release test, not a research method. It is quick, simple and precise enough to catch a racemate, and it fails only when the conditions are not controlled. Chiral HPLC is the referee: it separates the enantiomers and reports D-methionine directly. A specification that claims the L form should carry both. ## What “99%” means for each form An assay is a statement about the material named on the certificate. For L-methionine, 99% means 99% L-methionine. For DL-methionine, 99% means 99% of the racemic compound, about 49.5% L and 49.5% D. Two certificates can both read “99%” and describe different amounts of the L form. The routine HPLC assay does not separate them. On a non-chiral column the enantiomers elute at the same retention time, so the percentage is total methionine. The assay answers “how much”, the rotation answers “which one”. A certificate that reports 99% and no rotation has not shown the enantiomer. The dose arithmetic follows. A formula that declares 500 mg of L-methionine needs about 505 mg of a 99% L lot and about 1,010 mg of a 99% DL lot to deliver the same 500 mg of L. The extra mass is the D enantiomer, which is not the declared ingredient. A blend of L and DL can be built to any rotation and any assay, which is why both figures belong in the specification. ## Why the racemate is the feed grade The racemate is the large-volume commercial form because it is made by a synthetic route that produces both enantiomers together, and because feed formulations can use both. The D form is converted to the L form in the animal, so the racemate delivers methionine activity, and the feed industry has built its specifications and register entries around DL-methionine. The L form is used where the label names L-methionine. For a feed use, the additive name in the register entry is the reference, and the entry can differ by species and condition. The buyer's nutritionist and regulatory team confirm the form and the entry. A food-grade L certificate does not establish a feed authorisation, and a feed-grade DL certificate is not a substitute for the L form in a supplement. ## What the label has to say The label names the substance that was bought. In the EU ingredient list, “L-methionine” and “DL-methionine” are different declarations, and “methionine” alone leaves the form open. In the US Supplement Facts panel the dietary ingredient is written out the same way; a panel that declares L-methionine is not supported by a DL certificate. The label arithmetic has to survive the assay and the rotation. If the panel declares 500 mg of L-methionine per serving, the weigh-up has to deliver 500 mg of the L form from the lot's assay and enantiomeric composition. A DL lot cannot fill that line without a new panel. The certificate, the specification and the label should name the same substance and amount. No disease-related claim attaches to either form. The form is a labelling and specification question, not a claim, and a claim does not authorise a form that the market file does not cover. ## When the other form is the wrong choice Choose L-methionine when the label, the market file or the formula names the L form, and when the specific rotation is part of the release specification. Choose DL-methionine when the market and the formula name the racemate, typically in feed, and the register entry covers it. The decision is not a purity ranking: a 99% DL lot is a different substance, not a lower grade. A switch in either direction needs written change control, a new specification, a label review and a dose recalculation. The D fraction is not the declared ingredient, so the label and the safety review have to cover it. If a supplier offers “methionine 99%” without the form, ask which CAS number will appear on the certificate. The product hub carries the catalog specification; the grades page places this comparison in the wider range; the identity page gives the tests that separate the forms; the COA page shows how the form is reported; the compliance page covers the market files. The sulfur chemistry that makes methionine distinctive is also why N-acetyl-L-cysteine, a thiol, is a different ingredient with its own specification. ### 03 L-Methionine stability: oxidation, racemisation and the pack URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-methionine/stability/ Reviewed: 2026-11-19 Solid L-methionine is stable in a sealed pack at ambient temperature. The chemistry that limits shelf life is oxidation of the thioether sulfur to methionine sulfoxide and, in hot alkaline solution, racemisation of the L form. Moisture, heat, light and trace metals accelerate the oxidation, and a shelf life belongs to a pack and a matrix rather than to the molecule alone. In one lineThe sulfur is the reactive site: oxidation to the sulfoxide is the first change to look for, and heat, light and trace metals are what speed it up. ## The powder: low moisture, a reactive sulfur and a sealed pack The catalog sets loss on drying at ≤0.5%, a narrow moisture window for a crystalline amino acid. L-Methionine does not pull water from the air as strongly as a hygroscopic salt, so a hard cake is not the usual failure. The risk sits on the surface instead: a thioether sulfur exposed to headspace oxygen can convert slowly to methionine sulfoxide, and the powder can stay white and free-flowing while that fraction grows. The useful signals are analytical. An extra peak ahead of the main HPLC peak, a falling assay, or an assay that sits high relative to the rotation points to oxidation rather than dilution. A yellow cast or a sharper sulfurous note is a weak hint, not a release test. Peroxide residues are a separate hazard: a pouch cleaned with a peroxide agent, or an excipient carrying peroxide impurities, can oxidise the powder before it reaches the blend. Keep the pouch sealed, dry and away from light, and let a cold pack reach room temperature before opening so condensation does not form. ## The solution: oxygen, pH and heat act together Dissolved, the sulfur is far more mobile and the reaction speeds up. Oxygen availability, temperature, pH and trace metals then act together, and the process sets the exposure. A ready-to-drink line adds a pasteurisation or hot-fill step; a stick pack or a powder blend shifts the mixing to the consumer and avoids that heat load in the factory. pH has two effects. The L configuration is lost by base-catalysed racemisation, and heat accelerates it, so a high-pH hold is a configuration risk on top of an oxidation risk. Solubility also changes around the isoelectric point, near pH 5.7, so a stock that is clear at one pH can turn hazy at another. Check the formula pH and the hold time rather than assuming that a neutral-looking solution is the safe one. Iron and copper catalyse the oxidation at trace levels. Mild steel, a rusty coupling or a copper line can leave enough metal to shorten the usable hold. Use stainless steel or a plastic contact surface for the solution, and keep it out of light; a clear vessel on a bench exposes both the sulfur and the colour. ## What drives degradation Factors that move L-methionine during storage | Factor | What it does | Control | Oxygen | Converts the thioether to methionine sulfoxide | Sealed pack; low headspace; nitrogen if agreed | Heat | Speeds oxidation and alkaline racemisation | Controlled store; cool, short holds | Light | Photo-oxidation and colour drift | Opaque or foil pack; dark store | pH | Base-catalysed racemisation; solubility | Validate formula pH; avoid alkaline holds | Metal ions | Catalyse oxidation at trace levels | Stainless steel or plastic contact; exclude iron and copper | Moisture | Raises loss on drying; mobilises the reaction | Sealed pouch; desiccant where needed These factors reinforce one another. A warm, bright, damp store does more than the sum of three separate tests, and a clear bottle of neutral solution puts oxygen, light and heat in the same place. The question to ask is not whether the molecule is stable in the abstract, but which pack, which condition and which time period the data actually covers. ## A stability protocol for the ingredient Fix the storage condition, the pack, the time points and the tests before the first sample is placed. The long-term arm is 25 °C/60% relative humidity, the intermediate arm is 30 °C/65% relative humidity, and accelerated storage at 40 °C/75% relative humidity puts pressure on the pack. For L-methionine, add an oxidation arm, using oxygen or a peroxide challenge, and a light-exposure arm under the standard photostability design. Those arms cover the failure modes a dark incubator misses. At each point, measure assay by HPLC, specific rotation, loss on drying, appearance, microbiology and methionine sulfoxide. Rotation is the direct check on racemisation, and it is the test most often missing from an amino acid protocol; the same check by chiral HPLC gives a quantitative D-methionine figure. Report the individual results, and identify the pack and the lot family, not only a pass statement. A summary without the pack named is not evidence for it. The 1 kg pouch and the 25 kg drum differ in headspace, surface-to-volume ratio and opening history. One summary does not support the other. Ask for the summary that matches the pack on the purchase order. ## The finished formula changes the answer A capsule is a low-water environment, but its excipients are not inert. A metal stearate, some binders and mineral carriers can bring peroxide impurities or traces of iron and copper into the blend. Oxidation then begins inside the capsule, where the raw-material COA cannot stop it. Review the excipient specifications for peroxide value and for the metals that catalyse the reaction. A tablet adds compression and, if the process is wet granulation, water and heat. A crystalline amino acid can tolerate both, but the drying step and the residual moisture belong in the stability file. A stick pack or a drink mix dissolves the material at the point of use, so the formula pH, the dissolved oxygen and the flavour system take over. An overage can hide loss on the label, but it does not slow the chemistry and it has to appear on the panel. The contrast with N-acetyl-L-cysteine is useful. Its sulfur is a thiol that oxidises to a disulfide; the sulfur in L-methionine is a thioether that oxidises to a sulfoxide. The two need different analytical methods and different controls, so a stability programme written for N-acetyl-L-cysteine cannot be reused for methionine. ## How the shelf life is set No single shelf-life figure is published, because the retest period is a property of the pack and the storage condition. The period is written into the specification and rests on stability data generated in that pack. A figure offered without a pack, a storage condition and a test panel is a claim, not a shelf life. Once the retest period has elapsed, test the retained sample again before using the material beyond it. Extension should rest on a fresh result, not on habit, and a figure established for a drum should not be applied to a container that was repacked later. Pack options are listed on the product hub; release testing is set out on the COA page; ordering and lead time are on the MOQ page; the assay method appears in the HPLC note; release practice is summarised on the quality page. ### 04 L-Methionine: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-methionine/moq/ Reviewed: 2026-11-19 The MOQ for L-methionine is 1 kg, packed in a 1 kg foil pouch, with a 25 kg fiber drum as the bulk pack. Lead time is 1–7 days for the catalog grade. A firm quotation needs the form and CAS number, the assay and particle specification, the quantity and pack, the destination and Incoterm, the documents, and the intended use and market. In one lineThe minimum is one pack, not one kilogram of chemistry: a 1 kg pouch is the smallest unit that carries its own lot code, sample and certificate. ## Why the minimum is 1 kg One kilogram is a commercial pack, not a rounded-down drum. The pouch is filled, labelled and released as a lot, so the powder inside can be traced to a certificate and to a sample the supplier keeps. For a formulator, that pack does three jobs at once: it supports a bench trial, it provides a counter-sample if a result is disputed, and it allows an independent check of specific rotation. It also travels as an air parcel, which keeps a first order from waiting on a pallet. A quantity below 1 kg is normally a repack from a larger lot. The powder may be the same, but the pack identity changes: a new container, an extra handling step and often no certificate tied to the split. The 25 kg fiber drum is the production unit. It reduces handling per kilogram and supports a longer campaign, in exchange for a larger inventory commitment and a longer storage period. Neither pack changes the chemistry; the choice is how much traceable material the project can absorb. ## Packs and grades Standard L-methionine packs | Pack | Net weight | Use case | Notes | Foil pouch | 1 kg | Bench trial and sample | Heat-sealed foil; keep dry after opening | Fiber drum | 25 kg | Production campaigns | Lined drum; lot code repeated on the liner | Granulated powder | On request | Dust and flow control | Particle distribution and bulk density re-specified | Dilution | On request | Lower potency per gram | Carrier declared on the label and the COA The catalog grade is a 40 mesh powder: at least 95% passes a 40 mesh sieve. That line describes the finishing step, so a granulated or diluted powder is a new specification rather than another way of filling the same drum. L-Methionine is a crystalline solid with a sulfurous note, and the particle size affects how it flows, dusts and disperses in a blend. Say which behaviour the line needs before the quotation, because a change of mesh or a carrier can move both the specification and the dispatch date. ## Lead time and dispatch The catalog pack is dispatched within 1–7 days of order confirmation. The window covers picking, the lot paperwork and handover to the carrier. Transit, import clearance and the customer's own quality release sit outside it. A granulated grade, a finer sieve cut or a dilution is made to order and needs its own date; the quotation should show that date as a separate line rather than fold it into the standard window. Book against a dispatch date, not only a lead time. A 1 kg pouch can move as a parcel and a 25 kg drum usually needs a pallet, so the Incoterm decides who arranges the movement and who clears the entry. The COA, packing list and any market statement should accompany the lot. When the drum arrives, the lot code on the pack, the liner and the certificate should be the same code, or the paperwork describes a different container. ## What a quotation needs A quotation can be compared only when it names the same six things: - Substance and form. L-Methionine, CAS 63-68-3. Write the enantiomer; if the racemate is acceptable, say so explicitly. - Specification. Assay 98.5–101.5% and its basis, specific rotation +21.0° to +23.0°, loss on drying ≤0.5%, pH 5.0–7.0, particle size, heavy metals and microbiology. - Order size and pack. Choose a 1 kg foil pouch, a 25 kg fiber drum, or a granulated or diluted grade. - Destination and Incoterm. Country, port or delivery address, and the trade term. - Documents. COA, specification or TDS, SDS, and the market-specific statements the importer needs. - Use and market. Food, supplement or feed, and the country where the finished product will be sold. A line that says only “methionine” leaves the enantiomer open, and a line that omits the rotation cannot be checked against the certificate. The same lot can suit one destination and fall outside the file for another, because the route changes the paperwork, not the powder. Commercial terms belong on the quotation; this page does not set them. ## The sample is a lot, not a demonstration Qualification starts with the 1 kg pouch. Run identity by IR and HPLC, assay, specific rotation, loss on drying and microbiology on that pack, then keep a retained sample from it. The lot code on the pouch, the COA and the quotation should agree. A sample with no lot behind it can show appearance; it cannot qualify a supply. A bench quantity below 1 kg can be arranged, but handle it as a split with its own record. It is not the catalog pouch, and it may not come from the same lot as the first production drum. Record the split, the parent lot and the tests run on the split, and do not plan a launch on the assumption that the bench powder and the drum are interchangeable. ## Terms to settle before the first order Commercial terms and quality terms should be settled in the same conversation. The quotation covers the pack, the Incoterm, the dispatch date and the document set. Beside it belong the specification revision, the COA for each lot, the retained sample, the retest period and the route for a change of source, process or pack. A quality agreement signed before the first production order is easier to use than one negotiated after a failed delivery. If a lot misses the agreed specification, the retained sample and a joint re-test are the evidence. A photograph of the powder is not. Agree in advance which laboratory will act as referee and how the sample will be split and shipped, so the process does not start from scratch during a dispute. The product hub lists the catalog values; the COA page shows the release tests; the compliance page covers the market file; the MOQ glossary entry explains the abbreviation; the logistics page covers movement and documents. ### 05 The regulatory file for L-methionine URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-methionine/compliance/ Reviewed: 2026-11-19 L-Methionine is supplied as the free amino acid, CAS 63-68-3. Its regulatory file turns on three facts: the exact material, the destination and the route the finished product takes, whether food, food supplement or feed. The buyer's regulatory team confirms that route, and this page sets out the documents and checks the file should contain. In one lineThe file has to show the material, the route and the limits: an amino acid can enter a market as a food, a supplement or a feed additive, and each route asks for a different set of papers. ## What the file contains A working file answers four questions in order. Which material and specification revision does the order cover? Which lot is up for release, and what does the corresponding COA say? Which limits and label rules attach to the finished product? What follows a change of source, process or pack? The COA covers the lot, the technical data sheet covers the specification, and the SDS covers handling. None of the three decides the regulatory route. Route is the part an amino acid cannot take for granted. The same free amino acid may be sold as a food ingredient, as a food supplement ingredient or as a feed additive, and each category has its own register, label and evidence. A lot released against a food specification is not thereby inside the feed file, and the reverse is also true. The supplier holds the specification and the lot documents; the buyer's regulatory team confirms the route for the destination. ## European Union The EU layer starts with Regulation (EC) No 178/2002, the general food law, and the food information rules in Regulation (EU) No 1169/2011. Contaminants are controlled by Regulation (EU) 2023/915 as of this review, and the current consolidated text should be checked before the file is closed. For a food supplement, Directive 2002/46/EC provides the framework, but its harmonised Annex II lists vitamins and minerals rather than amino acids. The national rules of the destination Member State therefore decide how an L-methionine supplement is handled, and the file has to be built for that market. Feed is a separate route. Regulation (EC) No 1831/2003 governs feed additives, and the register entry names the additive, the target species and the conditions of use. A food-grade certificate does not create a feed authorisation, just as a feed entry does not establish a food route. If a specific purity criterion applies to the additive, it is an additional gate beside the catalog specification. ## United States In the United States, a dietary supplement is assembled under DSHEA: the dietary ingredient is named, and the facility follows the 21 CFR 111 good-manufacturing rules. An ingredient that is new to the market may need a premarket notification before it is sold. A conventional food use follows the food-additive or GRAS route instead, and the two files are not interchangeable. The buyer confirms which basis covers the finished product, and the label and claim are reviewed on their own track. The Supplement Facts panel is part of that track. It should name the dietary ingredient in the same form as the file, so “methionine” alone is not enough; the L form should be written out. The certificate does not approve the panel, and a change to the panel does not change the specification. ## Contaminants and limits The catalog limits apply to the ingredient as supplied. The finished-product limit is a separate calculation from the lot result, the dose per serving and the contribution of the matrix. The table is a starting point for a supplement file; the current destination text decides the final limit. Contaminant limits and what the file should show | Parameter | Catalog limit (ingredient) | What the finished-product file should show | Lead (Pb) | ≤3 mg/kg | Lot result, method, limit and the dose-based calculation | Arsenic (As) | ≤2 mg/kg | Lot result, the agreed limit and the method used | Cadmium (Cd) | ≤1 mg/kg | Lot result, plus any category exemption that applies | Mercury (Hg) | ≤0.1 mg/kg | Lot result with the analytical method A lot can pass the catalog limit and still fail the finished-product limit when the daily dose is high or when another ingredient adds the same element. Keep that calculation in the file, not in a covering email. ## Claims and the label No disease-related claim attaches to L-methionine as an ingredient. Any structure or function wording is reviewed by the brand's regulatory team for the destination, and the supplier's certificate has no role in that review. A claim does not alter the specification, and a specification does not authorise a claim. The label should name the substance and the form. In an EU ingredient list, “L-methionine” is the name that matches the certificate; “methionine” leaves the enantiomer open. In a US Supplement Facts panel, the dietary ingredient should be written out in the same way. For a feed label, the name in the register entry is the reference. The label and the certificate should describe the same substance. ## Documents and change control The file should hold the specification with its version, the COA for the lot, the TDS, the SDS, the allergen and GMO statements, the origin and manufacturing-route record, and the residual-solvent statement. A fermentation-derived material also needs a non-animal and BSE/TSE statement beside the origin record; kosher and halal certificates are available on request. If a statement is missing for the lot, name the gap before the order rather than at the port. Change control keeps the file coherent. A new source, a new fermentation route, a new drying step or a new pack can alter the certificate even when the catalog specification has not moved. Tell the buyer before the changed material ships, and make the specification revision traceable to the lot. ## Checklist before the first order - The specification revision, CAS 63-68-3 and the L enantiomer are stated. - The file holds the COA and TDS, the SDS, allergen and GMO declarations, the origin record and the residual-solvent statement. - The contaminant figures are recalculated for the finished-product dose. - The food, supplement or feed route is confirmed for the destination. - The label and any claim have been reviewed for that route. - Source, process and pack are under change control. - Quotation, specification and certificate refer to the same version. Catalog values sit on the product page; the COA page explains how a lot certificate is read; the identity page covers the analytical evidence. Release documentation is described on the quality page, and the EU and US regulatory notes set out the instruments. The same route question reaches glycine with a different specification, which is why it is answered product by product and market by market. ### 06 How we prove a lot is L-methionine URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-methionine/identity/ Reviewed: 2026-11-19 An L-methionine lot is the named material when four lines agree: the document names L-methionine and CAS 63-68-3, IR and HPLC match the reference, the specific rotation is +21.0° to +23.0° on the dried basis, and the sulfur content is close to the theoretical 21.5%. The assay alone cannot separate L-methionine from the racemate, the D form or a dilution. In one lineIdentity is four agreeing measurements: IR and HPLC say the molecule, the rotation says the L form, and the sulfur figure says the powder has not been diluted. ## The four identity layers A certificate can carry the right name and still leave the powder unidentified. The four rows in the table ask four different questions, and each row needs a measured answer. A supplier who stops at the first row has shown a document, not a material. Four layers of L-methionine identity | Layer | Question | Test | What it establishes | Document | Are the form and CAS number stated? | Name, CAS 63-68-3, formula | Only what the paper says | Spectroscopy | Is the molecule methionine? | IR and HPLC retention against a reference | The molecule, not its configuration | Polarimetry | Is it the L enantiomer? | Specific rotation at 589 nm, conditions recorded | Configuration, if the method is fixed | Elemental | Has the powder been diluted? | Sulfur and nitrogen by elemental analysis | Whether the sulfur-bearing mass is intact The rows answer different things and should agree. IR responds to the carboxylate, the ammonium group and the thioether, so it separates methionine from an acetylated derivative, a salt or another amino acid, but it cannot distinguish L from D. HPLC retention adds a second view of the same molecule. The polarimeter is the routine test that responds to chirality. The elemental result shows whether the sulfur still accounts for the expected share of the mass. ## The sulfur ratio and the rotation arithmetic Methionine contains one sulfur atom in a molecule with a molar mass of 149.21 g/mol, so the theoretical sulfur content is 32.06 ÷ 149.21 = 21.49%. Nitrogen is 14.01 ÷ 149.21 = 9.39%. A diluent without sulfur lowers both figures in proportion. A different sulfur compound can hold the sulfur figure up, which is why the elemental result is a dilution check first and an identity test only when it agrees with the IR, the chromatogram and the rotation. Rotation converts a mixture into a composition when the measurement conditions are held constant. The L form reads +21.0° to +23.0°, the D form has about the same magnitude with the opposite sign, and the racemate sits near zero. A lot reading +11° under the same method is about 75% L and 25% D, not a pure L material at half strength. A reading of +16.5° corresponds to about 87.5% L. The arithmetic depends on the solvent, the concentration and the temperature, so a value from another method cannot be converted this way. The assay measures total methionine. A 99% assay with a rotation of +11° describes a material that is 99% methionine by mass and about 74% L-methionine by configuration. Both numbers belong in the specification, because one says how much and the other says which form. ## The solid state: IR, XRD and the crystal form X-ray diffraction reads the crystal lattice. L-Methionine is crystalline, so a diffractogram is a fingerprint of the solid form and a useful comparison for a milled or granulated lot. It can also expose a crystalline diluent that the certificate does not mention, or show that a blend is largely amorphous. The reference pattern and the sample preparation belong in the method. XRD is not a chirality test. The L and D crystals of methionine are isostructural, so a small D fraction inside an L crystal does not change the pattern. The racemate is a different case: DL-methionine is a racemic compound with its own crystal structures, so its pattern can differ and the method may raise a flag. It cannot exclude a small enantiomer excess or measure one. Use XRD for the solid-form question and keep polarimetry or chiral HPLC for the configuration. For routine release, IR and rotation do the identity work. XRD belongs to an investigation: a new source, a disputed solid form, or a granulated grade that behaves unlike the reference. The technique is described in the XRD method note, and the infrared test in the FTIR note. ## What adulteration looks like Substitutions and the signals that catch them | Substitution | What it does | Signal | Test | DL- or D-methionine | Lowers or reverses the rotation; less L per gram | Rotation below +21.0° or near zero | Polarimetry; chiral HPLC | Non-sulfur diluent | Lowers the assay and the sulfur together | Assay low; sulfur below 21.5% | Assay, elemental sulfur, loss on drying | Methionine sulfoxide | Oxidised sulfur; may count as methionine on a non-specific assay | Extra HPLC peak; assay too high for the rotation | HPLC against a sulfoxide standard; LC-MS | Different sulfur compound | Keeps the sulfur figure, changes the molecule | IR or retention mismatch; rotation off | IR, HPLC, rotation | Moisture | Lowers the as-is assay | Loss on drying high; dried assay normal | Loss on drying Colour is the weakest evidence. White to off-white covers a wide range, and a blend can still be white. A clear solution does not prove the enantiomer either. The strong signals are the rotation, the sulfur figure and the chromatogram. A certificate that reports only appearance and assay has left the most likely substitution untested. One confusion is worth naming. N-Acetyl-L-cysteine is also a sulfur-containing amino acid derivative, but its sulfur is a thiol and its molecule is different. It is not a substitute for methionine and it does not share the identity tests; the N-acetyl-L-cysteine page carries that material's own evidence. ## How to write the identity into the specification - “L-Methionine, CAS 63-68-3, C5H11NO2S.” - “Assay 98.5–101.5% by HPLC, with the basis stated on the certificate.” - “Identification by IR and HPLC against a reference.” - “Specific rotation +21.0° to +23.0° on the dried basis, with solvent, concentration and temperature recorded.” - “Sulfur 21.5% within the agreed tolerance where identity is to be confirmed.” - “Loss on drying ≤0.5%; pH (1% solution) 5.0–7.0; ≥95% through 40 mesh.” - “D-Methionine not above the agreed limit, measured by chiral HPLC.” ## Five questions for the supplier - Which enantiomer does this lot contain, and what CAS number appears on its certificate? - What rotation was measured, and in which solvent, concentration and temperature? - Can you supply the IR spectrum and the HPLC chromatogram, not only the assay percentage? - What is the sulfur result, and which method produced it? - Would you support a joint re-test of the retained sample if a result is disputed? Five direct answers, with the raw data, amount to an identity file; one assay percentage does not. Catalog values are listed on the product hub; the COA page maps each figure to its place on the certificate; the grades page covers the physical grades; the L versus DL comparison takes the racemate further; the methods library explains the separations. ### 01 What the COA for L-phenylalanine actually contains URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-phenylalanine/coa/ Reviewed: 2026-11-19 A certificate for an L-phenylalanine lot reports appearance, identification by infrared and HPLC retention, assay by HPLC on the dried basis, specific rotation, loss on drying, pH, the heavy-metal panel, microbiology and particle size. Each row should carry its method and its release limit, and the measured result belongs in its own column. The limits here are the catalog specification; the batch COA confirms a particular pack. In one lineThe assay states how much phenylalanine is present, the rotation states which enantiomer it is, and a certificate with only the first line has not identified the material. ## The certificate as a test report A certificate is auditable when every row answers three questions: what was measured, with which method, and against which limit. A row that says only “conforms” asks the reader to accept a conclusion without the evidence behind it. Two rows decide what the powder is. Infrared absorption and HPLC retention say the molecule is phenylalanine; specific rotation says which enantiomer. Neither replaces the other, and the assay replaces neither: a racemate and an L lot can both read 99%. Identity, assay, moisture and contaminants · L-phenylalanine | Parameter | Method | Release limit | Appearance | Visual | White crystalline powder | Identification | IR; HPLC retention | Conforms to the reference | Assay (dried basis) | HPLC, ultraviolet detection | 98.5–101.5% | Specific rotation | Polarimetry at 589 nm, dried basis | -33.0° to -35.5° | Loss on drying | Gravimetric | ≤0.5% | pH (1% solution) | Potentiometric | 5.0–7.0 | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh ## Dried basis, moisture and the rotation basis The assay is reported on the dried basis. The laboratory measures the powder as received and divides by the dry matter, so the loss on drying has to appear beside the result. A lot at 98.4% as received with 0.35% loss on drying calculates to 98.75% dried; a lot at 98.3% with 0.5% moisture calculates to 98.79% and passes, while 98.3% calculated on the dried basis does not. The correction is small, but it decides release near the floor. The rotation needs the same discipline. It is calculated on the dried basis, the basis belongs in the rotation row rather than in a footnote, and the row should name the solvent, concentration, temperature and wavelength. Specific rotation depends on all four, so a figure without them cannot be repeated elsewhere or settle a dispute. ## Release limit versus batch result The release limit is the acceptance boundary for a lot; the result is what the laboratory measured. Both belong on the certificate, in separate columns, with the method beside them. A result column filled with the specification range is a copy of the gate, not a measurement. What the result column should contain | Parameter | Release limit | Result column | Assay | 98.5–101.5% dried | A measured percentage with the basis and method | Specific rotation | -33.0° to -35.5° dried | A measured angle with solvent, concentration and temperature | Loss on drying | ≤0.5% | A measured percentage | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot | Particle size | ≥95% through 40 mesh | The measured percentage through the sieve Two rows deserve a number rather than a statement. The rotation is the enantiomer line, and “conforms” there hides the one figure that separates the L form from a racemate. The metals are per element, because a single total hides the element that matters for the destination. ## What moves between batches Most of the movement comes from the route and the finishing. Fermentation, enzymatic resolution of an N-acyl derivative and chemical synthesis followed by a classical resolution reach the same molecule with different impurity profiles and different residual solvents. The route also sets the chiral efficiency, which shows in the rotation before it shows anywhere else. Particle size and bulk density move with milling and crystallisation; the 40 mesh line is a finishing specification and can change with the mill without a change in chemistry. Colour is a weak signal for this material. Crystal habit is the better observation, because it moves with the crystallisation solvent and shows in the flow of the powder. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a disputed rotation, or a form claim the supplier's certificate does not prove. The useful panel is IR, HPLC assay with the chromatogram, rotation with its method, loss on drying, ICP-MS for the four elements, and microbiology. Add nitrogen by Kjeldahl as a mass-balance check: the theoretical figure is 8.48%, and a large deviation points to a dilution or a different substance. If the route is synthetic, add a residual-solvent screen. If the enantiomer is disputed, ask for chiral HPLC rather than a second polarimeter reading: the rotation gives the net, the chiral separation gives the composition. Each screen should state its detection limit, and the sample tested should be the sample retained. ## What to compare between suppliers Put six lines side by side: form and CAS number; assay and basis; rotation with its method and solvent; loss on drying; heavy metals and microbiology; pack size and lot code. Two offers that agree on assay but differ on rotation are not describing the same powder. The second layer is traceability: who manufactured the lot, which route was used, and which milling and packing steps followed. The catalog specification sits on the L-phenylalanine product page. The tests that separate the enantiomers are on the identity page; the HPLC method is described in the HPLC method note, the spectra in the FTIR note, and the rest in the methods library. The release workflow is on the quality page, and the moisture term is defined in the loss-on-drying entry. ### 02 L-phenylalanine grades: the enantiomer and the crystal URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-phenylalanine/grades/ Reviewed: 2026-11-19 L-Phenylalanine is supplied as the L enantiomer at 98.5–101.5% by HPLC on the dried basis, with a specific rotation of -33.0° to -35.5° and a 40 mesh crystalline powder as the standard form. The alternatives sold under the same family name are DL-phenylalanine, the D enantiomer and the methyl ester used in peptide chemistry, and each is a different specification. Within the L grade, the remaining choice is physical: 40 mesh, a finer milled powder, or granules. In one lineGrade covers two decisions in this product — which enantiomer is in the drum and how the crystal is sized — and the assay percentage settles neither of them. ## Two decisions behind the word “grade” Buyers use “grade” for two unrelated questions: which molecule is in the drum — the L enantiomer, the racemic DL mixture or a derivative such as the methyl ester — and what crystal size and flow the filling line needs. A quotation that names only “phenylalanine 99%” has answered neither, and the two answers are not interchangeable. For this product the molecule is fixed as L-phenylalanine, CAS 63-91-2, formula C9H11NO2, molecular weight 165.19. The side chain is a benzyl group, which makes the molecule aromatic, only slightly soluble in water and easy to detect in the ultraviolet. The assay is a poor guide to the chemical question, because a racemic lot and an L lot can both sit inside a 98.5–101.5% window: the method counts molecules and is blind to which hand they carry. ## The L, DL and D grades side by side The three phenylalanine grades and what each contains | Specification | L-phenylalanine | DL-phenylalanine | D-phenylalanine | CAS number | 63-91-2 | 150-30-1 | 673-06-3 | Composition | One enantiomer | Near-equal parts of both | One enantiomer, the mirror image | Specific rotation | -33.0° to -35.5° dried | Close to zero | Positive, similar magnitude | Assay by HPLC | 98.5–101.5% dried | Read the certificate; the same window is possible | Read the certificate | L form per gram | About 1.00 g | About 0.50 g | None | Label name | L-phenylalanine | DL-phenylalanine | D-phenylalanine | Usual supply | Supplement and food use | Industrial routes, including resolution | Research and peptide synthesis Two rows carry the commercial consequences. The rotation is measured, so a buyer can check it on arrival with a polarimeter and a dissolved sample. The L content is arithmetic: a gram of the racemate delivers about half a gram of the L form, so a formula written for 500 mg of L-phenylalanine needs roughly twice the mass if DL is used. Compare grams of L delivered, not kilograms of powder. Two further materials appear in the same catalogues and are not grades of this product: L-phenylalanine methyl ester hydrochloride, an intermediate in the manufacture of the sweetener aspartame, and feed-grade L-phenylalanine, which is sold against a feed specification and a feed documentation set. ## What 40 mesh, milled and granulated change The catalog form is a crystalline powder with at least 95% passing a 40 mesh sieve, about 420 µm. That is the size most capsule fillers and blender feeds are set up for. Milling to 80 mesh, about 177 µm, gives a finer powder that dissolves faster and distributes more evenly in a small blend; it also makes more dust, holds more static and separates more readily from a coarser excipient. Granulation is the other direction: better flow, less dust, an even fill, and a slightly slower dissolve. Particle size changes the rate of dissolution, not the saturation point, because about 27 g dissolves per litre of water at 20 °C whatever the mesh. Bulk density and flow are not on the catalog specification; ask for both on the lot offered and run a fill trial. The terms are defined in the particle-size note. ## Fitting the grade to the dosage form A capsule takes the 40 mesh powder directly; a 500 mg dose plus excipients fits a size 0 or 00 capsule at a normal fill density, and the granulated form feeds more easily when the fill weight is at the top of the range. A tablet at the same dose needs a larger tool and a free-flowing feed, and the compaction trial shows whether a binder is needed. A stick pack or drink mix is the harder case because the dose has to dissolve. At about 27 g per litre, 500 mg needs roughly 19 mL of water and 1 g needs about 37 mL at 20 °C, so a 200 mL stick is comfortable and a 30 mL shot leaves part of a gram undissolved. ## Writing the grade into the specification The specification should name L-phenylalanine and CAS 63-91-2, set the assay by HPLC on the dried basis at 98.5–101.5%, require the rotation with the solvent, concentration and temperature stated, cap loss on drying at 0.5%, and fix the particle size at 95% or more through 40 mesh, or the milled or granulated variant that was ordered. Three lines are often left out and should not be. The rotation proves the L form. A related-substance limit with its method stops a reworked lot entering as new material. A residual-solvent statement is needed when the route is synthetic. If the file needs a number rather than a window, set a D-enantiomer limit by chiral HPLC. The certificate for a lot is described on the COA page, and the tests that separate the forms are on the identity page. ## When a switch is the wrong move Do not switch L for DL to close a gap in the formula: the label has to name the form in the drum, the market file has to match the label, and the racemate delivers about half the L form per gram. Do not accept a feed-grade or methyl-ester lot as “the same phenylalanine” either, and do not accept a certificate without a rotation. The head-to-head comparison is on the L versus DL page; the aromatic pair with L-tyrosine is described on its own page; the rules that follow the name are on the compliance page; the catalog specification is on the product page. ### 02.1 L-phenylalanine vs DL-phenylalanine: the enantiomer, the assay and the label URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-phenylalanine/grades/l-phenylalanine-vs-dl-phenylalanine/ Reviewed: 2026-11-19 L-Phenylalanine and DL-phenylalanine share the formula C9H11NO2 and the molecular weight 165.19, and differ in what the drum contains: one enantiomer against a near-equal mixture of both. The racemate delivers about half the L form per gram, reads close to zero on a polarimeter, and cannot be separated from the L material by a conventional HPLC assay. The label has to name the form, and the specification has to carry the rotation. In one lineTwo materials with the same formula, the same assay window and opposite optical behaviour: the rotation is the line that separates them and the label is the line that has to follow it. ## One chiral centre, two molecules, one mixture Phenylalanine has a single chiral centre at the alpha carbon, so it exists as two mirror-image enantiomers. The L form is (S)-2-amino-3-phenylpropanoic acid and the D form is (R). The L form is the one found in dietary protein and the one bought for supplement use; the D form is a small-volume research and synthesis material. DL-Phenylalanine is not a third molecule: it is a mixture of the two, normally close to 1:1, which is why it is optically inactive. The identifiers are separate. L-Phenylalanine is CAS 63-91-2, DL-phenylalanine is CAS 150-30-1, and D-phenylalanine is CAS 673-06-3. The three have the same formula and the same mass, so a certificate that reports only formula, appearance and assay has said nothing about which of them is in the pack. ## The rotation, read as a number Specific rotation is the observed rotation normalised to unit concentration and path length. The catalog window for the L form is -33.0° to -35.5° on the dried basis; the racemate reads close to zero; the D form reads positive with a similar magnitude. The sign gives the direction; the size gives the distance from racemic. The value is linear in the enantiomer fraction, so it converts into an enantiomeric excess. Take a pure L reference near -34.25° and a measured -25.7°: 25.7 ÷ 34.25 = 75% excess, which is about 87.5% L and 12.5% D. At the lower edge, -33.0°, the excess is about 96%, or roughly 2% D: the lot passes and is still not fully resolved. The measurement is small and easy to spoil: at 1 g per 100 mL in a 1 dm cell, -34° gives an observed reading of about -0.34°, so temperature, dissolution and cell cleanliness matter. Specific rotation also depends on the solvent, and a certificate that omits the solvent, concentration and temperature cannot be checked. The method notes are collected in the methods library. ## Why the assay cannot answer the question The common assay is reversed-phase HPLC with ultraviolet detection against a phenylalanine standard. Both enantiomers have identical spectra and, on a conventional C18 column, identical retention, so the method counts molecules and ignores handedness. A racemic lot at 99.0% and an L lot at 99.0% produce the same certificate line. Phenylalanine has a weak chromophore, so many methods read 200–220 nm or derivatise the amino group; neither changes the chiral blindness. To separate the enantiomers, use a chiral stationary phase, a chiral derivatising reagent such as Marfey's reagent, or chiral gas chromatography after esterification. Polarimetry is the routine check and chiral HPLC the quantitative one; a DL certificate with neither has not reported the enantiomer content. ## Solubility, pH and the crystal L-Phenylalanine dissolves to about 27 g per litre of water at 20 °C, so a 1% solution is clear and a 3% stock is difficult at room temperature. Solubility is lowest near the isoelectric point, about pH 5.5, because the molecule carries almost no net charge there; acid or alkali raises it. The catalog pH of 5.0–7.0 for a 1% solution sits across that point, so the powder dissolves slowly without stirring. The racemate is a distinct solid phase rather than a physical mixture of two crystals, so its melting behaviour, crystal habit and dissolution rate can differ from the L material. For a tablet or a suspension it can change flow and dissolution, so a formulation trial is the reliable test. The hydroxylated analogue, L-tyrosine, is one oxygen heavier, much less soluble and a separate ingredient, not an alternative grade. ## What the label has to say The ingredient name is the first obligation. “L-Phenylalanine” means the L enantiomer and “DL-phenylalanine” means the mixture; the declared amount describes the named ingredient, not a calculated quantity of one enantiomer inside it. In the EU the name sits among the particulars required by Regulation (EU) No 1169/2011 and the supplement rules of Directive 2002/46/EC; in the US it is declared in the Supplement Facts panel under 21 CFR 101.36. There is no Daily Value and no Nutrient Reference Value for the amino acid, so no percentage belongs beside the amount. Phenylalanine also carries a labelling consequence that most amino acids do not. It is the amino acid that people with phenylketonuria must restrict, and food law provides a declaration for foods that are a source of it. The familiar wording is attached in the EU and the US to foods containing aspartame, so a free amino acid is not automatically covered by the same sentence. The destination's reviewer confirms whether a statement is needed and in which words; this page is not a label text. The claim wording follows the same rule. A statement written for L-phenylalanine cannot be moved onto a DL product by editing the ingredient list, because the claim would then describe a material that is not in the pack. A claim that names a disease is outside the supplement route in every market discussed here. ## Choosing between them Which phenylalanine form fits which brief | Brief | Form | Reason | Capsule or stick pack labelled L-phenylalanine | L form, 40 mesh or milled | The label, the rotation and the file all have to say L | Reformulation of a product already labelled L | L form | A change of form changes the label and the market file | Racemic reference for a method or a study | DL form | The rotation reads near zero, and the certificate should say so | Peptide synthesis or a research standard | D form or the ester | Different materials with their own certificates | Offer without a rotation or a chiral result | Neither | The enantiomer is unproven, whatever the assay says Two rules close the question. Count grams of L delivered, because a kilogram of racemate supplies about half the L of a kilogram of the L grade. Then put the rotation into the specification and check it on the first delivery; one reading settles what a page of assay data cannot. The wider grade range is on the grade page, the identity layers on the identity page, the certificate lines on the COA page, and the market rules on the compliance page. The same enantiomer question for another amino acid is worked through on the L-tryptophan page, and the catalog specification is on the product page. ### 03 L-phenylalanine is stable dry; moisture, sugar and the pack decide the rest URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-phenylalanine/stability/ Reviewed: 2026-11-19 L-Phenylalanine is a stable crystalline solid, and the failures that matter are not hydrolysis of the molecule but moisture in an open pack, reaction with reducing sugars in a warm blend, and microbial growth in an aqueous stock. The catalog limits loss on drying to 0.5% and fixes a 40 mesh powder; the shelf life is assigned from stability data for the exact pack and storage condition, not from the certificate. In one lineThe powder keeps when it stays dry and away from reducing sugars; the losses come from a warm humid blend or a clear solution, not from the amino acid itself. ## The powder: moisture, heat and the seal Loss on drying is capped at 0.5%, a tight figure for a material that does not hold much water. Phenylalanine is a neutral amino acid, not a hydrate and not a salt, so it carries no water of crystallisation and does not deliquesce in a normal warehouse. The moisture that appears is surface and interstitial water from a humid room or an open pouch, and it shows first as a rising loss on drying, then as caking and a slower dissolve. The solid is chemically robust at ambient temperature. It has no peptide bond to hydrolyse and no unsaturated centre that oxidises readily. The aromatic ring absorbs ultraviolet light, which matters for a clear solution and very little for a foil-packed powder; the solid is not photolabile in the way a vitamin such as riboflavin is. Caking is the practical dry-storage problem: a stacked drum in a humid store presses the powder into lumps that break the flow of a feeder even when the assay is unchanged. ## The solution: where the product actually fails Solubility is about 27 g per litre of water at 20 °C, so a 1% solution sits at roughly a third of saturation and a 3% stock is not practical at room temperature. Solubility is lowest near the isoelectric point, about pH 5.5, because the molecule carries almost no net charge there; acid or alkali raises it. A formulator who needs a concentrate should move the pH rather than warm the water, because heat shifts the equilibrium only slightly and adds a microbial risk. In water the molecule itself is stable; the solution is not. An aqueous stock with no preservative, no chill and a neutral pH supports microbial growth within days, and the first sign is a haze or a smell rather than a drop in assay. A liquid finished product also brings a heat load from pasteurisation or hot fill and a package that may be clear. Validate the hold time, control the pH and protect the container from light, and remember that a bulk-powder result does not transfer to a beverage. ## What drives change during storage Factors that move an L-phenylalanine powder or solution | Factor | What it does | Control | Moisture | Raises loss on drying; caking; slower dissolve | Sealed pouch; dry store; liner closed | Heat with a reducing sugar | Browning and a honey-like odour from phenylacetaldehyde | Keep glucose and maltodextrin out of the warm blend, or validate the colour | pH in solution | Changes solubility and the microbial environment | Set the pH for the formula, not at the isoelectric point | Microbial load in water | Growth, haze and off-odour | Preserve, chill, filter or use a dry format | Light | Slow change in a clear solution; negligible in a foil pack | Opaque or amber container for liquids | Compression | Caking under stacked drums | Limit stack height; rotate stock The second row is specific to this molecule. The amino group of phenylalanine reacts with the carbonyl group of a reducing sugar in the presence of heat and a little water, and the Strecker degradation that follows releases phenylacetaldehyde, which smells of honey and flowers. A sweetened powder blend can develop that odour and a colour shift while the assay still passes. The reaction is slow in a dry capsule fill and much faster in a warm, moist blend or a gummy. ## A stability protocol for the ingredient A useful protocol states the pack, the storage condition, the time points and the tests. Long-term storage at 25 °C and 60% relative humidity and intermediate storage at 30 °C and 65% cover the warehouse; accelerated storage at 40 °C and 75% stresses the seal. A photostability arm covers the liquid case, and a blend arm covers the sugar reaction. Test assay by HPLC, specific rotation, loss on drying, appearance, related substances and microbiology at each point. The rotation should not move in a stored sample; if it does, a contaminated standard or a mis-set temperature is the more likely explanation. For a blend, add colour and odour to the panel, because those are the first signs. Ask for the stability summary for the pack you will buy, not for a different pack from the same line. ## The finished formula changes the answer A capsule or tablet has low water activity and is the easiest case, but the shell and the excipients can still transfer moisture, so check loss on drying at release and after storage. A tablet that contains a reducing sugar and is stored warm is a small Maillard reactor, and the granulation step is where the heat and the water are. A gummy is the hardest case: its water activity, its glucose syrup and its warm process all favour the sugar reaction, and the colour can shift long before the phenylalanine figure does. A stick pack is easier, but only if the foil seal is intact. Whether an overage is needed is a formulation and label decision, and it does not repair a pack that lets moisture in. The COA page covers the release tests and the loss-on-drying note defines the moisture term. ## How the shelf life is set We do not publish a single shelf-life number for L-phenylalanine, because the pack and the storage condition set it. The assigned retest period belongs on the specification and is supported by the stability file for that pack. A number without a pack, a condition and a test panel is not a shelf life; it is a claim. After the retest period, re-assay the retained sample before extending use, and do not carry a bulk figure across to a repacked container. The product hub lists the standard packs; the MOQ page covers pack and lead time; the assay is described in the method note; the release and retest workflow is on the quality page. ### 04 L-phenylalanine: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-phenylalanine/moq/ Reviewed: 2026-11-19 The MOQ for L-phenylalanine is 1 kg, supplied as a 1 kg foil pouch, with a 25 kg fiber drum as the bulk pack and a lead time of 1–7 days for the standard grade. A quotation firm enough to compare needs six details: the enantiomer and CAS number, the specification including the rotation, the quantity and pack, the destination and Incoterm, the documents, and the intended use. In one lineThe minimum is set by the pack that can carry a lot code, a retained sample and a rotation check, not by the size of the trial. ## Why the minimum is 1 kg A 1 kg pack covers a bench trial, a retained sample and an independent rotation or chiral test, and it does so from a single lot. It is also small enough to travel as a parcel rather than on a pallet, which matters when a formulator needs material before the production plan is fixed. The pack is a commercial unit with a lot code, not a scoop taken from a bulk drum. Below 1 kg the material is usually split from a larger lot and repacked. That split adds handling, loses the original pack identity and makes traceability harder without changing the chemistry. The 25 kg drum is the bulk unit: it reduces handling per kilogram, but it commits inventory and a storage period, and for a material that is not hygroscopic the storage risk is mainly caking and an open liner rather than chemical change. The MOQ is a pack decision, not a volume incentive. ## Packs and formats Standard L-phenylalanine packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Particle profile changes; fill trial advised | Milled powder | On request | Faster dissolve, small blends | 80 mesh; more dust and static The catalog form is a 40 mesh crystalline powder with at least 95% passing the sieve. Granulation or milling is a different specification, not a packing choice, so it should be named before the quotation rather than after the order, because it moves the particle-size line and may move the lead time. The powder is not light-sensitive in the solid state, so the pouch is a moisture barrier first; an opaque pack is still the sensible default for a warehouse with windows. ## Lead time and dispatch The standard grade is quoted at 1–7 days from order confirmation. That window covers picking, document preparation and dispatch; it does not include the shipping transit, customs clearance or the customer's own quality release. A custom granulation, a milled grade or a non-standard pack adds time, and the quotation should state it as a separate line rather than folding it into the standard figure. Ask for the dispatch date, not only the lead time. A 25 kg drum usually travels on a pallet and a 1 kg pouch can travel as a parcel, and the Incoterm decides who books the freight and who clears the entry. The documents should travel with the lot, not after it, and the lot code on the certificate should match the pack, the packing list and the retained sample. ## What a quotation needs Six items make a quotation firm enough to compare: - Product and form. L-phenylalanine, CAS 63-91-2, with the enantiomer written out; DL and D are different materials. - Specification. Assay on the dried basis, specific rotation with its method, loss on drying, particle size, heavy metals and microbiology. - Quantity and pack. 1 kg pouch, 25 kg drum, or the granulated or milled variant. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, specification, TDS, SDS, and any market-specific statement the importer needs. - Intended use and market. Supplement, food, feed or another use, and the market where it will be sold. A quotation that leaves out the enantiomer or the intended market is incomplete. The same powder can suit one destination and sit outside the file for another, and the paperwork is part of the offer. Commercial terms are not published on this page; they are stated on the quotation. ## The sample is a lot, not a demonstration The 1 kg pack is the qualification sample. Test the rotation first, because it is fast, needs only a polarimeter and settles the enantiomer question; then the assay, loss on drying and microbiology. Keep a retained sample from the same pack, and check that the lot code on the sample, the certificate and the quotation are the same string. A sample that cannot be traced to a lot is a demonstration, not a qualification. If the project needs a smaller quantity for a bench trial, discuss it before ordering. A split from a bulk lot is a repack with its own traceability, not the catalog pack, and it should be documented as such. Do not assume that a bench sample and the production drum will come from the same lot, and do not ask a laboratory to compare a rotation on a sample whose lot number is unknown. ## Terms to settle before the first order The quotation sets out the commercial terms, the Incoterm, the pack, the lead time and the documents. The quality terms belong beside them: the specification revision, the COA per lot, the retained sample, the retest period and the change-control route. A quality agreement is worth having before the first production order, not after the first dispute, and it should name the rotation method so that a later disagreement has a defined test. Returns and replacements follow the quotation and the quality agreement. A lot that fails the agreed specification should be handled through the retained sample and a joint re-test, not through a photograph of the powder. Ask who pays for the referee test and which laboratory is acceptable to both sides. If the form is the disputed point, the referee test is a rotation or a chiral separation, not a second assay. The product hub carries the catalog specification; the COA page lists the release tests; the compliance page covers the market files; the MOQ glossary entry defines the term; the logistics page covers shipping and documents; the quality page describes the release file. ### 05 The regulatory file for L-phenylalanine URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-phenylalanine/compliance/ Reviewed: 2026-11-19 L-Phenylalanine is sold as a food and supplement ingredient, and the file behind it answers four separate questions: whether the form may be sold in the destination, what the contaminant ceiling is for the finished product, how the label names the ingredient, and whether any claim is allowed. The EU, the US and the UK answer those in different instruments, so the buyer's regulatory team confirms the route. This page lists the framework, documents and checks; it is a sourcing reference, not legal advice. In one lineThe ingredient status, the contaminant ceiling, the phenylalanine declaration and the claim are four separate checks, and each market signs them off in its own instrument. ## The four checks The first question is whether the ingredient may be placed on the market at all. The second is whether the finished product stays under the contaminant limits at the daily dose. The third is whether the label names the ingredient and the amount correctly, including any statement that the presence of phenylalanine requires. The fourth is whether a health claim attached to it is authorised and substantiated. A batch certificate supports all four and replaces none of them, and the operator placing the product on the market owns the file. ## European Union Directive 2002/46/EC harmonises food supplements, but its positive list in Annex II covers vitamins and minerals, not amino acids. L-Phenylalanine therefore sits under general food law, Regulation (EC) No 178/2002, together with any national rules the destination Member State applies; several have their own notification or composition requirements. The label follows Regulation (EU) No 1169/2011 and the supplement particulars of the Directive. The novel-food position is checked for the exact form. The amino acid has a long history of food use, so the expectation is a pre-15 May 1997 history rather than an authorisation, but the entry for the form should be confirmed in the EU Novel Food Catalogue as of the review date. The racemate and the D form are different ingredients and do not inherit that history. ## United States L-Phenylalanine is a dietary ingredient under DSHEA, and the supplier should be able to support the position that it was marketed in the US before 15 October 1994; an ingredient in that position does not need a new dietary ingredient notification. The finished product is made under 21 CFR 111 and labelled under 21 CFR 101.36, and the FDA does not approve supplements or their ingredients before sale, so the file is the evidence. A structure/function claim is allowed if it is truthful, not misleading and substantiated, with the DSHEA disclaimer and a notification to the FDA within 30 days after marketing. A claim that names a disease is outside that route, and advertising is subject to FTC substantiation as well. A food use rather than a supplement use is a different route and should be checked before the claim is written. ## United Kingdom Great Britain applies retained food law and the GB register, and Northern Ireland follows the EU framework under the Windsor Framework. The two are checked separately, and the label, the limits and the novel-food position are confirmed against the GB text rather than the EU one. ## Contaminants and limits The contaminant panel is a finished-product calculation, not only a drum result. The table is the starting point; the destination text and the daily dose decide the final figure. Contaminant limits for L-phenylalanine and the finished product | Parameter | Catalog limit, raw material | Finished-product reference | What to confirm | Lead (Pb) | ≤3 mg/kg | 3.0 mg/kg in the supplement · EU and UK | Headroom for other ingredients and method uncertainty | Cadmium (Cd) | ≤1 mg/kg | 1.0 mg/kg, with category exceptions | The category that applies to the product | Mercury (Hg) | ≤0.1 mg/kg | 0.10 mg/kg | The method and its limit of quantification | Arsenic (As) | ≤2 mg/kg | No harmonised supplement limit | The buyer's own limit and the test behind it | Microbiology | APC ≤1,000 cfu/g; E. coli and Salmonella absent | Hygiene criteria for the finished product | The finished-product test, not only the drum The EU and UK ceilings apply to the food as placed on the market, so a raw-material limit set at the ceiling leaves no room for the other ingredients in the capsule. The dose also converts the material limit into a daily intake: 500 mg at the lead ceiling of 3 mg/kg contributes 1.5 µg of lead, above the 0.5 µg per day maximum allowable dose level that California's Proposition 65 sets. A supplier limit below the ceiling is a purchasing decision, not a formality. ## The claim boundary In the EU and the UK, a health claim must be authorised and appear in the applicable Register, and Regulation (EC) No 1924/2006 also requires it to be truthful, clear and substantiated. As of this review the EU Register does not carry an authorised claim for phenylalanine as such. A protein claim belongs to the protein content, not to an added amino acid, and the conversion of phenylalanine to tyrosine is a biochemical statement rather than an authorised claim. In the US, a structure/function claim is possible under DSHEA with the disclaimer and the notification, but a disease claim is not. In all three markets a claim describes the ingredient named on the label, and the form matters: a claim written for L-phenylalanine does not transfer to a DL product by editing the ingredient list. ## The document file Documents a brand should hold for an L-phenylalanine lot | Document | What it supports | Market | Batch certificate of analysis | Release against the specification, with methods and results | All | Specification | The agreed limits, methods and the dried basis | All | Technical data sheet | Solubility, particle size, storage and pack | All | Safety data sheet | Hazard and handling information | All | Allergen and GMO statements | Composition and labelling declarations | EU, UK, US | Enantiomer and rotation statement | The L form, with method and result | All | Origin and manufacturer statement | Traceability and the production route | All | Heavy-metal and microbiology reports | The contaminant and hygiene envelope | All | Label declaration review | The phenylalanine statement and the claim wording | EU, UK, US ## Checklist before the first order - Name the enantiomer and match CAS 63-91-2; DL and D are different ingredients. - Confirm the market entry position for that form, including Member State rules and the GB register. - Set raw-material contaminant limits below the finished-product ceiling, and keep an arsenic limit because the EU and the UK do not set one. - Convert the figures to the daily dose and check the US state thresholds. - Check whether a phenylalanine statement is required, and have the wording reviewed. - Check every claim against the Register or the DSHEA route. - Collect the documents against the lot number, not the product name alone. The release tests are on the COA page, the form choice on the L versus DL page, and the identity evidence on the identity page. The adjacent aromatic amino acid is on the L-tyrosine page; the framework references are in the EU, US and UK notes; the release file is described on the quality page; the catalog specification is on the product page. ### 06 How we prove an L-phenylalanine lot is the L form URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-phenylalanine/identity/ Reviewed: 2026-11-19 An L-phenylalanine lot is identified when five lines agree: the name and CAS number on the document, the infrared spectrum, the HPLC assay on the dried basis, the specific rotation, and a mass balance of moisture, residue and nitrogen. The assay alone cannot separate the L form from the racemate, because both return the same number on a conventional column. The rotation is the line that does. In one lineIdentity is a set of agreeing measurements: the IR and the assay say phenylalanine, the rotation says which enantiomer, and the mass balance says whether the powder has been diluted. ## The five identity layers A certificate can name the right material and still fail to prove it. The layers below are separate questions, and each one needs its own evidence. A supplier who answers only the first has described the paperwork, not the powder. Five layers of L-phenylalanine identity | Layer | Question | Test | What it proves | Document | Are the enantiomer and CAS named? | Name, CAS 63-91-2, formula | Paperwork only | Spectroscopy | Is the substance phenylalanine? | Infrared spectrum against a reference | The molecule, not the enantiomer | Chromatography | How much is there? | HPLC assay on the dried basis | Quantity, not identity | Rotation | Which enantiomer is it? | Polarimetry, or chiral HPLC | The L form and the D fraction | Mass balance | Is the powder diluted? | Assay, loss on drying, residue, nitrogen | Consistency of the numbers The order matters for a dispute. Start with the document, because a certificate that does not name the enantiomer has already failed the first layer. Then read the rotation, because it is fast and decisive. The spectroscopy and the mass balance confirm what the rotation suggests. ## The enantiomeric ratio, from the rotation The rotation measures the net optical activity of the dissolved sample, and because the two enantiomers rotate in opposite directions, the net value is proportional to the difference between them. Read against a pure L reference near -34.25°, a measured -30.8° corresponds to about 90% enantiomeric excess, roughly 95% L and 5% D. That lot can still pass a 98.5–101.5% assay, and it falls outside the catalog window, so the D fraction has to be controlled by a line of its own if the label depends on it. Two methods put a number on that fraction. Polarimetry is the routine check; chiral HPLC with a chiral stationary phase, or reversed-phase HPLC after derivatisation with a chiral reagent, is the quantitative one. Chiral gas chromatography after esterification works too. A chiral result should name the column or the derivatising reagent, the mobile phase, the standard and the limit of quantification, because a chiral method that has not been validated for the D form can miss a small fraction entirely. An enantiomeric purity line in the specification closes the question: “D-phenylalanine not more than 1.0% by chiral HPLC” is a testable statement, while “L form” alone is a name. The L content per gram follows from the same number, which is what a formulator needs when the label declares an amount of the L ingredient. ## X-ray diffraction and the solid state X-ray diffraction answers a different question: is the solid crystalline, and does its pattern match a reference? It separates a crystalline amino acid from an amorphous carrier or a spray-dried dilution, and it can compare lots from two sources. For this molecule it has an extra use, because the racemate is a distinct crystal phase rather than a simple mixture of L and D crystals; its powder pattern is therefore not the sum of the two enantiomer patterns, and a DL lot can be recognised as a different solid. The limit is that XRD is not a purity assay and not a chiral assay. A physical blend of L and DL powders gives a superimposed pattern, a small D fraction inside an otherwise L crystal may not show at all, and an amorphous dilution can look like a poorly crystalline version of the same material. Ask for the reference pattern, the scan range and the detection limit before reading a “match” statement. The method is most useful when the question is solid form, and it supports the rotation rather than replacing it. The XRD method note describes the technique. ## What adulteration looks like Common L-phenylalanine substitutions and the signals | Adulterant | What it does | Signal | Test | DL-phenylalanine | Halves the L content per gram; rotation falls toward zero | Rotation inside or below the window; D fraction on a chiral run | Polarimetry, chiral HPLC | D-phenylalanine | Rotation turns positive; the L form is absent | Positive angle with a normal assay | Polarimetry, chiral HPLC | L-Tyrosine | Similar aromatic amino acid, much less soluble | Different IR and retention; UV maximum near 274 nm instead of 257 nm | IR, HPLC, solubility | Dilution with lactose or maltodextrin | Lowers the assay and the nitrogen figure | Assay low; nitrogen below 8.48%; residue high | Mass balance, IR | Moisture | Raises loss on drying; lowers the as-received assay | LOD above 0.5%; dried assay normal | Loss on drying The racemate is the substitution that a certificate is least likely to reveal, because the assay, the appearance and the infrared spectrum can all match. The signals are optical and gravimetric: a rotation that sits at the low edge of the window, or a nitrogen figure that is low for the assay, deserves a chiral test before the lot is accepted. ## How to write identity into the specification - “L-Phenylalanine, CAS 63-91-2, C9H11NO2, molecular weight 165.19.” - “Assay 98.5–101.5% by HPLC on the dried basis; loss on drying ≤0.5%.” - “Identification by infrared absorption and by HPLC retention against a reference.” - “Specific rotation -33.0° to -35.5° on the dried basis, with solvent, concentration and temperature stated.” - “D-Phenylalanine not more than 1.0% by chiral HPLC, where the label depends on the enantiomer.” - “Nitrogen 8.3–8.6% as a mass-balance check; residue on ignition ≤0.1%; heavy metals and microbiology as listed.” - “Particle size ≥95% through 40 mesh; pack, lot code and retained sample as agreed.” ## Five questions for the supplier - Which enantiomer is this lot, and does the certificate carry a rotation with its method and solvent? - Can you provide the infrared spectrum and the HPLC chromatogram, not only the assay percentage? - What is the D-phenylalanine figure by chiral HPLC, and what is the limit of quantification? - What are the loss on drying, the residue on ignition and the nitrogen result for this lot? - If the enantiomer is disputed, will you accept a joint rotation or chiral re-test on the retained sample? Five direct answers amount to an identity file; one assay percentage does not. The product hub carries the catalog specification, the COA page shows where each figure sits on the certificate, the grade page compares the forms, and the L versus DL page covers the label consequences. The spectra are described in the FTIR note, and the release workflow is on the quality page. ### 01 What the COA for L-proline actually contains URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-proline/coa/ Reviewed: 2026-11-19 An L-proline certificate reports appearance, identification by IR and HPLC, assay by HPLC, specific rotation on the dried basis, loss on drying, the pH of a 1% solution, particle size, heavy metals and microbiology. The figures below are the catalog specification; the batch certificate confirms a particular pouch or drum. Two lines carry the identity: the assay says how much proline is present, and the rotation says which proline it is. In one lineThe assay gives the amount of proline in the lot; the specific rotation gives the enantiomer, and only the two together describe the powder. ## The certificate as an auditable report A certificate is useful when each line can be checked against a method and a limit. A row that reports “conforms” without the reference, or a figure without its method, cannot be audited. Identity, assay and solution tests · L-proline | Parameter | Method | Release limit | Appearance | Visual | White crystalline powder | Identification | IR and HPLC | Conforms to reference | Assay | HPLC | 98.5–101.5% | Specific rotation | Polarimetry, dried basis | -84.0° to -86.5° | Loss on drying | Gravimetric | ≤0.5% | pH (1% solution) | Potentiometry | 5.0–7.0 Physical, contaminant and microbiological limits | Parameter | Method | Release limit | Particle size | Sieve analysis | ≥95% through 40 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent The identity line needs both tests. IR gives a pattern that can be compared with a reference spectrum, and HPLC gives a retention time and a purity profile. Neither is a chiral measurement, so neither can separate the L form from the D form; that is the rotation's job. ## The assay basis and the rotation conditions The assay percentage is a fraction of the powder, and the powder contains water. The catalog range is 98.5–101.5% by HPLC; the certificate should say whether that figure is calculated as-is or on the dried basis. At the loss-on-drying limit of 0.5% the difference is small — 98.5% as-is becomes 99.00% on the dried basis — but the basis is part of the result, not a footnote. Proline has no aromatic ring and no strong ultraviolet chromophore, so an HPLC method that depends on absorbance at a short wavelength sees very little. Practical methods derivatise the amino acid before separation, or use a detector that responds to the molecule itself. The certificate should name the derivatisation reagent, the column, the detection and the standard, because “by HPLC” on its own does not describe a method. Specific rotation is the chiral line. The catalog window is -84.0° to -86.5° on the dried basis, and the sign and size of the figure are the enantiomer evidence. Rotation depends on solvent, concentration, path length and temperature; a certificate that omits those conditions cannot be compared with the window or with a second laboratory's result. Ask for the conditions even when the number is inside the window. ## Limit and result in separate columns A limit is the boundary a lot has to meet; a result is what the laboratory measured on that lot. They belong in separate columns, with the method beside them. A result column filled with the specification range is a copy of the gate, not a result. What the result column should contain | Parameter | Release limit | Result column | Assay | 98.5–101.5% by HPLC | A measured percentage with its basis and method | Specific rotation | -84.0° to -86.5°, dried basis | A measured angle with solvent, concentration and temperature | Loss on drying | ≤0.5% | A measured percentage | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot | Particle size | ≥95% through 40 mesh | The measured percentage through the sieve A rotation just inside -84.0° is passing but close to the boundary a small amount of D form would cross; a loss on drying near 0.5% leaves little room for moisture pickup in a humid filling room. Neither is a rejection, but each deserves a question before release. ## What changes from lot to lot Moisture moves with the pack and the season. Mesh and colour move with crystallisation, drying and milling. The assay moves with moisture and with the amino-acid profile of the lot. The rotation should not move if the material is the L form; a drift toward zero is the finding that matters, because it points to the D enantiomer rather than to the water. The arithmetic is simple. If a lot were 95% L-proline and 5% D-proline, the observed rotation would be about 0.95 × (-85.25°) + 0.05 × (+85.25°) = -76.7°, outside the catalog window, while an achiral HPLC assay could still report a figure inside the assay range. A rotation that has moved from about -85° to about -77° across lots is a racemisation finding, not an analytical nuisance. The route can explain such a shift. L-proline from fermentation or from protein hydrolysis is normally the L form; a synthetic route that builds the racemate has to resolve it, and an incomplete resolution leaves the D form in the lot. The certificate, the batch record and the rotation together show which case applies. ## When an outside test is worth ordering An outside laboratory is worth using for a new source, a first shipment into a regulated market, an enantiomer claim the certificate does not support, or a disputed result. The panel is polarimetry with conditions stated, chiral HPLC for the D form, an amino-acid profile, IR against a reference, loss on drying, ICP-MS and microbiology. Add a hydroxyproline check if the material could be collagen-derived. Hydroxyproline is the hydroxylated analogue, a different label ingredient with its own CAS number, and a method that does not separate the two can hide it. The rotations of the two are both negative and not far apart, so a blend can land inside the proline window; the chromatogram is the evidence that the two peaks were separated. Every screen should come with its detection limit; a “not detected” entry without one says more about the method than the lot. Chain of custody matters: the material sent to the laboratory should be the material kept on file, and the report should identify the lot. If a result is disputed, supply the referee with the retained sample, the certificate and the specification, and specify the tests that separate the L form from the D form and the hydroxylated analogue. ## Comparing two suppliers Compare six lines: name and CAS number; assay result and basis; specific rotation with its conditions; loss on drying; heavy metals and microbiology; mesh and pack. If two offers match on assay but not on rotation, they are not offers for the same material. Traceability is the second layer: the certificate should name the producer, the lot code should match the pack and the retained sample, and the specification should carry a version. The catalog specification is on the L-proline product page. The tests that separate the L form from the D form and from hydroxyproline are on the identity page; the analytical methods are introduced in the methods library; the release workflow is described on the quality page. ### 02 L-proline, DL-proline and D-proline: choosing a grade URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-proline/grades/ Reviewed: 2026-11-19 L-Proline is sold as the L enantiomer, as the racemate DL-proline and as D-proline, and each is a separate specification with its own CAS number and rotation. The catalog item here is L-proline, CAS 147-85-3: white crystalline powder, assay 98.5–101.5% by HPLC, specific rotation -84.0° to -86.5° on the dried basis. The assay on a quotation does not say which of the three is in the drum; the name and the rotation do. In one lineL, DL and D proline are three purchase items rather than three grades of one item, and the rotation is the line that tells them apart. ## Why proline comes in three forms Proline has one chiral centre, at the carbon that carries the carboxyl group. The L form occurs in proteins, the D form is its mirror image, and the racemate contains equal amounts of both and is optically inactive. A fermentation or a protein-hydrolysis route gives the L form; a chemical synthesis that starts without a chiral pool gives the racemate, which then has to be resolved. The three materials share the same formula and the same molecular weight, so an assay that counts the amino acid cannot distinguish them. The difference is commercial as well as chemical. A label names one ingredient, a specification controls one rotation window, and a formula was built on one enantiomer. An order that says “proline” without the enantiomer has not specified the material, and a certificate that reports only an assay has not shown which enantiomer was released. ## The three forms side by side L-proline, DL-proline and D-proline as purchase items | Property | L-Proline | DL-Proline | D-Proline | CAS number | 147-85-3 | 609-36-9 | 344-25-2 | Formula | C5H9NO2 | C5H9NO2 | C5H9NO2 | Molecular weight | 115.13 | 115.13 | 115.13 | Specific rotation | -84.0° to -86.5° | About 0° (racemate) | About +84° to +86.5° | Occurs in proteins | Yes | No | Only in specific peptides | Label name | L-Proline | DL-Proline | D-Proline | Catalog item | Yes | Separate specification | Separate specification The table is a specification table, not a ranking. DL-Proline is a legitimate material for a synthesis bench or a research use; it is not a way to buy L-proline for a supplement, because half the mass is the other enantiomer and the label cannot call it L-proline. ## Solubility, mesh and handling All three are white crystalline solids, freely soluble in water, and the catalog sets loss on drying at ≤0.5% for the L form. The L form is stable as a dry solid and melts with decomposition above 200 °C; the racemate has its own crystal packing and melting behaviour, which is why an X-ray pattern is a solid-form check rather than a purity assay. The catalog L grade is milled to 40 mesh, with at least 95% passing the sieve, white and free-flowing. Granulation is available on request and changes flow, dust and bulk density, not the chemistry. A finer or a coarser mesh is a separate specification line; agree it before the order rather than at the filling line. Solubility is high. About 162 g of L-proline dissolves in 100 mL of water at 25 °C, so a 20% stock is practical and a concentrated amino-acid solution has room to work. A 1% solution sits at pH 5.0–7.0, close to neutral, which is one reason the material is easy to place in a blend. The solution is a nutrient medium, so the microbiology of a held stock is a separate question from the solubility. ## What the enantiomer does to the dose and the label The dosage form follows the enantiomer. A capsule that declares 500 mg of L-proline needs 500 mg of the L material; a racemate would need about 1,000 mg to carry the same amount of the L form, and the label would still have to name DL-proline. There is no fill-weight adjustment that converts one label ingredient into the other. In a powder blend or a stick pack, the L form dissolves readily at the usual doses. In a tablet, the 40 mesh grade flows and compresses; a granulated grade may suit a high-speed press better. In a capsule, bulk density and mesh decide the fill weight, and the fill weight has to be set on the material the certificate names. Taste is a minor factor at a capsule dose and a larger one in a stick pack, so the final blend should be tasted rather than assumed neutral. The rotation is not a dose parameter, but it is a release parameter. A source change should be accompanied by a rotation result before the first production run, because a lot that passes the assay and fails the rotation is not the material the label promises. ## Specification lines for the contract - “L-Proline, CAS 147-85-3, formula C5H9NO2, molecular weight 115.13.” - “Assay 98.5–101.5% by HPLC; state the basis and the detection.” - “Specific rotation -84.0° to -86.5° on the dried basis; state solvent, concentration, path length and temperature.” - “Identification by IR and HPLC; attach the spectrum and the chromatogram.” - “Loss on drying ≤0.5%; pH 5.0–7.0 in 1% solution.” - “Particle size: at least 95% through 40 mesh, with the metals and microbiology panel written into the specification.” - “L enantiomer; a D-proline limit can be agreed by chiral HPLC.” We supply the L form. DL-Proline and D-proline are separate purchases with their own certificates and label names; a switch to either needs a written change control and a fresh label review. The catalog specification is on the L-proline product page. The hydroxylated analogue is compared on the L-proline versus L-hydroxyproline page; the certificate lines are explained on the COA page; the chromatographic methods are introduced in the methods library. ### 02.1 L-proline vs L-hydroxyproline: the hydroxyl group and the label URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-proline/grades/l-proline-vs-l-hydroxyproline/ Reviewed: 2026-11-19 L-Proline (C5H9NO2, CAS 147-85-3) and L-hydroxyproline (C5H9NO3, CAS 51-35-4) differ by one hydroxyl group and 16 mass units: 115.13 against 131.13 g/mol. Proline is one of the standard amino acids used in protein synthesis; hydroxyproline is formed by hydroxylating proline residues in collagen and is not one of the 20 coded amino acids. Both are white crystalline solids and both are levorotatory, but they are different label ingredients and are not interchangeable. In one lineOne oxygen separates the two: 16 mass units, a different CAS number and a different name that the label has to carry. ## The hydroxyl group and where it comes from Both molecules share the pyrrolidine ring, which is why they can look alike on a certificate that reports only appearance and assay. Proline has a hydrogen at the 4-position of the ring; hydroxyproline has a hydroxyl there, in the trans configuration in the collagen-derived material. The extra oxygen raises the molecular weight by 15.999 g/mol and changes the hydrogen bonding, the crystal packing and the solubility. The biological difference is larger than the formula suggests. Proline is incorporated into proteins during translation. Hydroxyproline is not: it is made after translation, when proline residues in collagen are hydroxylated, and it is essentially confined to collagen and collagen-like sequences. That is why a collagen peptide is specified by its hydroxyproline content, and why free hydroxyproline is a different product from a collagen peptide. Glycine occupies every third position in the collagen repeat, and glycine, proline and hydroxyproline together account for roughly half of the amino-acid residues in collagen. ## The two materials side by side L-proline against L-hydroxyproline | Property | L-Proline | L-Hydroxyproline | CAS number | 147-85-3 | 51-35-4 | Formula | C5H9NO2 | C5H9NO3 | Molecular weight | 115.13 | 131.13 | Nitrogen content | 12.17% | 10.68% | Specific rotation | -84.0° to -86.5° (catalog) | About -74° to -77° (literature) | Solubility in water, 25 °C | About 162 g/100 mL | About 36 g/100 mL | Occurs in proteins | Yes, during translation | No, formed after translation in collagen | Label name | L-Proline | L-Hydroxyproline The nitrogen figures show why an elemental check can flag a substitution: a nitrogen result near 10.7% is not consistent with pure proline, whose theoretical figure is 12.17%. Nitrogen methods are not identity tests, however, and a blend can be built to land between the two. Use the figure as a flag and the chromatography as the evidence. ## The rotation: close values, different windows Both rotations are negative, so the sign does not separate the two. The catalog window for proline is -84.0° to -86.5°; literature values for trans-4-hydroxy-L-proline are around -74° to -77°. A pure hydroxyproline sample falls outside the proline window, but a blend can sit inside it: 90% proline at -85.25° and 10% hydroxyproline at -75.5° gives about -84.3°, inside the window. Rotation alone therefore cannot rule out a hydroxylated fraction. The rotation still earns its place. A racemate or a D-enriched lot moves the figure toward zero or above it, and no other line on the certificate detects that. Use the rotation as the enantiomer gate and the HPLC method as the separation: the chromatogram should show the proline peak resolved from the hydroxyproline peak, and the hydroxyproline level should be reported against an agreed limit. ## Solubility and the dosage form Proline is far more soluble: about 162 g per 100 mL of water at 25 °C against about 36 g per 100 mL for hydroxyproline. A formula that dissolves 20% proline will not dissolve 20% hydroxyproline, and a concentrated stock or a clear beverage is easier to build on proline. The difference is large enough to change the dosage form, not only the mixing time. Both are white crystalline powders, and both are handled as free-flowing solids when dry. Hydroxyproline is the more polar molecule and the less soluble one; its solution behaviour and its taste are its own. A formulator who swaps one for the other at the same weight changes the solids load, the solubility margin and the label at once. ## What the label must name In the EU and the UK, the ingredient list names the material that is in the product: “L-proline” or “L-hydroxyproline”. A collagen peptide is declared as collagen peptides or hydrolysed collagen, not as free hydroxyproline; the hydroxyproline figure on its specification is an analytical marker, not a declared ingredient. In the US, the Supplement Facts panel identifies the ingredient by name in the same way, and the amount refers to that ingredient. There is no conversion factor that makes one a legal substitute for the other. The molecular weights differ by 13.9%, so a milligram figure is not even comparable across the two labels, but the difference is not a correction the formulator may apply. A label that declares L-proline while the drum contains hydroxyproline is wrong on the name and on the amount. The buyer's regulatory team confirms the route for the free amino acid in the destination. The label check and the market file are separate from the specification, and the form named on the label has to be the form the certificate covers. ## When to choose which Choose L-proline for capsules, tablets, powder blends and any formula that needs a freely soluble, close-to-neutral amino acid with a standard label name. Choose L-hydroxyproline only when the label and the market file call for that specific ingredient, and do not accept it as a substitute for proline or for collagen peptides. If the intent is to declare collagen, use a collagen peptide with a hydroxyproline specification; if the intent is to declare free proline, use L-proline. The three are different purchases. The L-proline product page carries the catalog specification; the glycine page covers the third residue in the collagen repeat; the collagen peptide page shows how hydroxyproline is specified in a peptide; the methods library covers the chromatography and rotation; the quality page describes the release file. ### 03 L-proline keeps as a dry solid; the pack and the formula set the rest URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-proline/stability/ Reviewed: 2026-11-19 L-Proline is a stable dry solid. The pack has to keep moisture out, and the two failure modes that matter are moisture pickup in the powder and microbial growth or browning in an aqueous formula. The molecule has no sulfur, no aromatic ring and no oxidisable side chain, so the shelf life is usually set by the pack and the matrix rather than by the proline itself. In one lineL-proline is not the fragile part of the formula: the pack, the water activity and the heat process decide how long it keeps. ## The powder: moisture and the tight limit The catalog limit is ≤0.5% loss on drying, and it is tight for a reason. Proline is hygroscopic: an open pouch in a humid filling room gains water, the powder becomes sticky, and the as-is assay falls while the dried-basis assay stays inside the window. The solid is still the L form; the problem is the water, not the molecule. Store the sealed pouch or drum in a dry, cool place, and let a cold pack reach room temperature before opening, so that no condensation forms on the contents. A desiccant helps only while the container is closed; it cannot replace a good seal. The powder should stay white and free-flowing, and caking or a colour shift is a handling finding rather than a normal ageing step. Light is a secondary issue for the solid. Proline does not carry a chromophore that makes it photolabile, but a clear container still lets the label and the appearance be judged by eye, and a dark store removes one variable. The foil pouch is the standard pack for a reason: it is the moisture and light barrier, and the seal is the part that has to be closed properly. ## The solution: microbiology, heat and reducing sugars In water, proline is freely soluble and the solution is close to neutral. The chemical risks are low, but a solution is still a nutrient medium: an unpreserved aqueous stock can support microbial growth, and an open beaker on a bench is an exposure to light and air. For a stock, use water of controlled microbial quality, filter or preserve as the process allows, and set a hold time that is supported by a count rather than by appearance. Heat and reducing sugars are the second solution risk. Proline takes part in browning reactions with sugars during a heat process, and a clear amino-acid solution can turn yellow or brown in a hot fill even when the assay is unchanged. A ready-to-drink product therefore needs its own stability work at the process pH, the process heat load and the sugar level; a bulk-powder result does not transfer to the bottle. Extreme pH is the third. A neutral dry solid is not at risk of racemisation, but a hot alkaline process is a different case: base and heat can convert part of the L form to the D form. If a formula is processed at high pH, ask for the rotation on the finished material, not only on the incoming lot. ## What drives change Factors that move L-proline during storage and processing | Factor | What it does | Control | Moisture | Water uptake; caking; a lower as-is assay | Sealed pouch; dry store; desiccant while closed | Heat | Faster browning with sugars; process loss | Cool process; validate the heat load | Light | Colour drift in solution and in clear packs | Opaque pack; dark store | Microbiology | Growth in an unpreserved aqueous stock | Preservative or sterile filtration; hold time | pH | Racemisation in a hot alkaline process | Keep the formula near neutral; check rotation | Reducing sugars | Browning in a heated formula | Reduce the sugar load or shorten the heat step The factors act together. A warm, bright, humid store compounds the effects, and a sweet, hot-filled drink brings the sugar, the heat and the water together in one pack. The question is not whether proline is stable in the abstract, but which pack, which condition and which time frame the claim refers to. ## A stability protocol for the powder and the pack A protocol should name the pack, the storage condition, the sampling points and the test panel. The warehouse is covered by long-term storage at 25 °C/60% relative humidity and an intermediate condition at 30 °C/65%; an accelerated condition at 40 °C/75% puts pressure on the pack. Add a light-exposure arm if the pack is clear or the product is a liquid. Test assay, specific rotation, loss on drying, appearance, pH and microbiology at each point. The rotation belongs in the panel because it is the enantiomer check, and a programme that tests only the assay can miss a slow racemisation. Report the individual results and identify the pack and the lot family; a pass statement without the numbers cannot be reviewed. Request the summary for the pack on the order, not for a sibling pack. A drum and a pouch differ in headspace, surface area and how often they are opened; the data should belong to the pack on the purchase order. ## What the matrix adds Water activity is low inside a capsule or tablet, yet the shell and the excipients can still pass moisture to the fill. Measure loss on drying when the lot is released and again after storage, and inspect the fill; a soft or sticky fill is a moisture finding even when the assay is in range. For a stick pack the seal and the foil are the barrier; a pinhole defeats them, so inspect the strip as well as the powder. A beverage combines water, heat and, if the formula contains a reducing sugar, a browning route. A gummy adds a low-pH, high-heat process and a gelatin or pectin matrix; the amino acid is not the unstable part, but the colour and the taste can move. An overage is a decision about the label and the stability data; it cannot compensate for a pack that admits water. If a process step is hot and the formula contains a reducing sugar, the better answer is usually to shorten the heat load or to protect the colour, not to add more proline at the end. ## How the retest period is assigned A shelf life is a property of a pack and a storage condition, not of the molecule alone. The assigned retest period is stated on the specification and supported by the stability file for that pack; a figure without those three is a claim, not a result. Once the retest period has passed, assay the retained sample again before extending use. A bulk figure does not transfer to a repacked container, and an extension needs data rather than assumption. The catalog packs are the 1 kg foil pouch and the 25 kg fiber drum; both need the liner closed and the pack kept dry. The product page lists the standard packs; the COA page sets out the release tests; the MOQ page deals with pack sizes and lead time; the quality page shows how a lot is released; the methods library introduces the assays behind each result. ### 04 L-Proline: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-proline/moq/ Reviewed: 2026-11-19 L-Proline is supplied from a 1 kg foil pouch, with a 25 kg fiber drum as the bulk pack; lead time is 1–7 days for the standard pack. A firm quotation has to name the enantiomer and CAS number, the assay basis and rotation, the quantity and pack, the destination and Incoterm, the documents, and the intended use and market. In one lineOne kilogram is the smallest order because the pack, the lot code and the rotation result have to belong to the same unit. ## Why one kilogram is the minimum One kilogram is enough to run a bench trial, hold back a retained sample and send a portion to an outside laboratory for polarimetry and a chiral check. It also travels as a parcel, which helps a formulator who needs material before the production plan is signed off. The pack carries its own lot code and certificate; it is not a scoop from a bulk drum. An order below 1 kg means splitting a larger lot and repacking it. That adds handling, breaks the link to the original pack and makes traceability harder without changing the chemistry. A 25 kg drum lowers the handling per kilogram, but it ties up inventory and sits in storage longer. The minimum is set by the pack, not by a volume target. The enantiomer question arrives before the pack question. One kilogram of the wrong proline is not a small trial; it is a label problem waiting for the first production run, so the order should say L-proline and CAS 147-85-3 first. ## Pack sizes and formats Standard L-proline packs | Pack | Net weight | Use | Handling note | Foil pouch | 1 kg | Trial and small batch | Barrier to moisture and light; close after use | Fiber drum | 25 kg | Production runs | Lined; lot code on drum and liner | Granulated powder | On request | Flow and dust control | New particle profile | Custom mesh | On request | Tablet or capsule fill | Separate specification line The catalog grade is a 40 mesh powder, ≥95% through 40 mesh. Granulating it or milling to another mesh creates a different specification line, not a different packing option. Tell us before the quotation if the press needs a coarser or freer-flowing powder; the change can move both the particle-size result and the lead time. ## Lead time and shipping The standard pack ships 1–7 days after order confirmation. That covers picking, paperwork and handover to the carrier; transit, customs and the buyer's own quality release sit outside it. A granulated grade, a custom mesh or a non-standard pack adds time, and the quotation should say so on its own line. Ask for the dispatch date as well as the lead time. A drum usually moves on a pallet while a pouch moves as a parcel, and the Incoterm decides who books the freight and who clears the entry. The certificate and the other documents should be in the same shipment as the lot. ## What the quotation has to state A quotation can be compared only when it covers six points: - Product and enantiomer. L-Proline, CAS 147-85-3, with the L form written out. - Specification. Assay basis, specific rotation, loss on drying, mesh, heavy metals and microbiology. - Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated or custom-mesh variant. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, specification, safety data sheet and any market-specific statement the importer needs. - Intended use and market. Whether the use is a supplement, a food or something else, and the country of sale. An offer that leaves out the market or the enantiomer cannot be checked against the specification. The same powder can fit one destination and fall outside the file for another, so the paperwork belongs in the offer. Commercial terms appear on the quotation, not on this page. ## The sample is a released lot The kilogram you receive for qualification should be a released lot with its own certificate, not a hand-filled jar. Test identity, assay, rotation, loss on drying and microbiology before scaling, and keep a portion of the same pack as the retained sample. The lot code should run through the pack label, the certificate and the quotation. A bench quantity below 1 kg can be discussed before the order, but it is a repack from a bulk lot and has its own traceability. The production drum may come from a different lot; plan the bridging test rather than assume the two are the same. Put the rotation in the sample test even when the supplier's certificate reports it. A sample that passes the assay but sits near the edge of the rotation window is a question for the source, not a detail to settle at the first production run. ## Terms to settle before ordering The quotation covers the commercial terms, the Incoterm, the pack, the lead time and the documents. The quality terms sit beside them: which specification revision applies, a certificate per lot, the retained sample, the retest period and the route for a change. A quality agreement is easier to sign before the first production order than after the first disagreement. Returns and replacements should follow the quotation and that agreement. If a lot fails the agreed specification, work from the retained sample and a joint re-test rather than a photograph of the powder. Agree in advance who pays for the referee analysis and which laboratory both sides accept. The catalog specification is on the product page; the COA page lists the release tests; the compliance page covers the market files; the quality page describes the release workflow; the identity page explains the rotation check. ### 05 The regulatory file for L-proline URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-proline/compliance/ Reviewed: 2026-11-19 L-Proline is an amino acid, CAS 147-85-3. The regulatory file has to show the exact form, the route the buyer relies on for the destination, the contaminant calculation for the finished dose and the label wording. This page lists the instruments and documents that belong in the file; it does not decide permission for a market. The buyer's regulatory team owns that decision. In one lineAn amino acid can enter a market as a food ingredient, a supplement ingredient or an additive, and the file has to name the route the buyer relies on. ## What the regulatory file contains A usable file answers four questions: what the material is and which specification version is being bought; which lot is being released and what its certificate reports; which route and limits apply in the destination; and what happens when the source, the process or the pack changes. The certificate covers the lot, the technical data sheet the specification, and the safety data sheet the handling. None of them decides the route. For an amino acid the route question is real: the same powder can be sold as a food ingredient, a supplement ingredient, an additive or a flavouring, and the instruments differ. The file should name the route rather than leave it implicit; the specification with L-proline, CAS 147-85-3 and the rotation window is the common starting point. Instruments to check for an amino-acid ingredient | Market | Main instruments | What they settle | European Union | Regulation (EC) No 178/2002; Regulation (EU) No 1169/2011; Regulation (EU) 2023/915; Directive 2002/46/EC; Regulations (EC) No 1333/2008 and No 1334/2008 | General food law, labelling, contaminants, supplement status, and the additive and flavouring routes | United States | FD&C Act as amended by DSHEA; 21 CFR 111; 21 CFR 101.36; the food-additive or GRAS route where the use is a food ingredient | Dietary ingredient status, cGMP, Supplement Facts, and food use | Great Britain | Retained food law, GB labelling rules and the GB novel food register; Northern Ireland follows the EU framework | Permission and labelling for the destination This is a sourcing reference, not legal advice; the current text and the buyer's own review decide. ## The European Union General food law sets the safety obligation, and Regulation (EU) No 1169/2011 sets the labelling particulars. Contaminants are governed by Regulation (EU) 2023/915 as amended. Food supplements fall under Directive 2002/46/EC, whose Annexes list the vitamins and minerals permitted in supplements; an amino acid is not on those lists, so the level and notification rules come from general food law and the member state where the product is sold. The buyer's team confirms the position for the destination. Two further routes apply if the use is not a supplement. Where proline is used as an additive, Regulation (EC) No 1333/2008 and its Union list apply; where it is used as a flavouring, Regulation (EC) No 1334/2008 applies. A novel-food check under Regulation (EU) 2015/2283 belongs as a documented position. As of this review the consolidated texts are the reference, and member-state practice is part of the answer. ## The United States The supplement route runs through the FD&C Act as amended by DSHEA. The manufacturer must test the identity of each component under 21 CFR 111, and the Supplement Facts panel is set by 21 CFR 101.36. The supplier's file should support the identity of L-proline: name, CAS number, IR and HPLC identity, and the rotation. If the intended use is a conventional food rather than a supplement, the food-additive or GRAS route applies, and the buyer confirms the basis. A structure or function statement is possible on the supplement route if it is truthful, substantiated and accompanied by the DSHEA disclaimer in 21 CFR 101.93; a disease claim is not. The label and any claim are checked apart from the certificate. ## Great Britain and Northern Ireland Great Britain and Northern Ireland follow different routes. The GB file uses retained food law, GB labelling rules and the GB novel food register; Northern Ireland sits under the EU framework. Which one applies is for the buyer's regulatory team to confirm. An EU file does not automatically answer the GB question. ## Contaminant limits and the daily dose The catalog limits are specification terms, not the destination's finished-product limit. The file needs the lot result, the method, the limit and the arithmetic to the daily dose. Catalog limits and what the file should show | Parameter | Catalog limit | What the file shows | Lead (Pb) | ≤3 mg/kg | Lot result, method and the finished-product calculation | Cadmium (Cd) | ≤1 mg/kg | Lot result and any exception for the category | Mercury (Hg) | ≤0.1 mg/kg | Lot result and method | Arsenic (As) | ≤2 mg/kg | The agreed limit, the method and the destination rule A lot released at the catalog limit leaves no analytical margin: if the daily dose is high, or another ingredient adds the same metal, the supplement can exceed the destination's limit even though the powder passed. The arsenic line is contractual in many markets; check whether the destination sets a maximum. The calculation belongs to the finished product, not only to the drum. ## Claims and the label In the EU and the UK, health claims are governed by Regulation (EC) No 1924/2006 and its retained equivalents, and a claim has to be authorised before it is used. Compositional statements are a different category: “L-proline 500 mg per capsule” describes the product, and the figure must match the certificate. In the US, the structure or function route rests on the brand's substantiation and carries the disclaimer; a disease claim is not available on either route. The certificate cannot approve a claim, and a claim cannot alter the specification. The brand's reviewer checks the wording for the market, the form and the dose. This page makes no therapeutic or disease-related claim. ## Documents the file must hold - A batch certificate with the method and basis for each result, and a lot code that matches the pack. - The versioned specification, naming L-proline, the CAS number, the assay basis and the rotation window. - A safety data sheet, an allergen statement and a GMO statement for the material and the pack. - A site and country-of-origin statement naming the producer; a BSE/TSE statement for an animal-derived route and a non-animal statement for a fermentation route. - A residual-solvent statement and a food-contact declaration for the pouch and liner. - A stability summary, the assigned retest period and any halal or kosher certificate the market needs. - Any destination-specific declaration the importer requires, with its version and date. ## Checklist before the first order - Name the market and, in the EU, the member state of sale. - Name the route: food ingredient, supplement ingredient, additive or flavouring. - Confirm that the specification and the label both say L-proline, not DL-proline. - Convert the contaminant limits to the daily dose and write down the margin. - Check the destination's level, notification and novel-food position, not only the EU text. - Review the claim wording against the register or the US substantiation file. - Keep the specification, certificate and label on the same version and lot code. The catalog specification is on the product page; the COA page walks through the lot certificate; the identity page sets out the analytical evidence; the quality page describes the release file. ### 06 How we prove a lot is L-proline, not a racemate URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-proline/identity/ Reviewed: 2026-11-19 A lot is L-proline when four lines agree: the document names L-proline and CAS 147-85-3; IR and HPLC match the reference; the specific rotation falls in the -84.0° to -86.5° window; and the assay, loss on drying and impurity profile close the mass balance. The rotation is the line an achiral HPLC method cannot supply, and it is the line that a racemate or a D-enriched lot fails. In one lineIdentity is a chain of agreeing measurements: IR and HPLC name the molecule, the rotation names the enantiomer, and the mass balance shows nothing else is carrying the number. ## Five layers that must agree A certificate can carry the correct name and still leave the material unproven. Each layer below asks a different question and needs its own evidence. An answer that stops at the first has described the paperwork, not the powder. Five layers of L-proline identity | Layer | Question | Test | What it proves | Document | Is the enantiomer named? | Name, CAS number, formula | Paperwork only | IR | Is the functional-group pattern right? | FTIR against a reference | The molecule, not the enantiomer | HPLC | Is it proline, and what travels with it? | HPLC with a stated detection | Amount and impurity profile, not chirality | Polarimetry | Is it the L form? | Specific rotation, conditions stated | The enantiomer | Mass balance | Is it wet or diluted? | Assay, loss on drying, impurities | Consistency of the numbers The order matters. The document layer is a claim, the IR and HPLC layers describe the molecule, and the rotation is the only layer that reads chirality. A certificate with a name, an assay and no rotation has not tested the question that separates L-proline from the racemate. ## The rotation as an enantiomer ratio The rotation converts to an enantiomer ratio. If the pure L form reads about -85.25° and the pure D form reads about +85.25° under the same conditions, a mixture reads the weighted average. A 95:5 L:D lot reads about -76.7°, outside the window; a 99:1 lot reads about -84.4°, inside the window but close to the -84.0° edge; a lot with no D form reads about -85.25°, near the middle. The arithmetic cuts both ways. An assay of 100% with a rotation of -76.7° means about 5% D form, not a dilution. An assay of 95% with a rotation of -85.25° means a dilution but no detectable D form. Run the two together and the pattern is readable; run either alone and it is not. The same arithmetic is why a blend with a levorotatory analogue can pass the rotation. A 90:10 blend of L-proline (about -85.25°) and L-hydroxyproline (about -75.5°) reads about -84.3°, inside the catalog window. The rotation is a useful gate, not a complete identity test; the HPLC method has to separate the two peaks and report the hydroxyproline level. ## X-ray diffraction and the solid form X-ray diffraction answers a solid-state question: is the powder crystalline, and does the pattern match the reference? L-Proline and DL-proline do not share a crystal structure, so a pattern can separate the L form from the racemate even when the chemical assay agrees. It can also show an amorphous carrier or a dilution that has changed the solid form. XRD is not a routine release test here, and a certificate that reports only “XRD conforms”, with no pattern or reference, has told the reader very little. Before accepting a match statement, ask for the reference pattern and the detection limit. On a disputed lot, the three together carry more weight than any one alone; XRD by itself does not measure the water, the assay or the amount of D form. ## Signals of substitution Common L-proline substitutions and the signals | Adulterant | What it does | Signal | Test | DL-Proline | Adds the D form; the assay barely moves | Rotation moves toward 0° | Polarimetry; chiral HPLC | D-Proline | Enriches the D form | Rotation moves toward 0° or positive | Polarimetry; chiral HPLC | L-Hydroxyproline | Adds 16 mass units; a different label ingredient | Rotation shifts up; an extra HPLC peak | HPLC or MS; rotation; hydroxyproline assay | Glycine | Achiral diluent; lowers the assay | Rotation moves toward 0°; the assay falls | HPLC amino-acid profile; rotation | Moisture | Lowers the as-is assay | Loss on drying high; the dried-basis assay normal | Loss on drying Glycine deserves a line of its own because it is the simplest amino acid and an achiral one: added to a lot, it pulls the rotation toward zero while the assay falls, and both signals point the same way. Colour is not a signal here. L-Proline is white, and a white powder can be any of the materials in the table; the stronger signals are the rotation, the chromatogram and the mass balance. ## Specification lines for identity - “L-Proline, CAS 147-85-3, formula C5H9NO2, molecular weight 115.13.” - “Assay 98.5–101.5% by HPLC; state the basis and the detection.” - “Specific rotation -84.0° to -86.5° on the dried basis; state solvent, concentration, path length and temperature.” - “Identification by IR and HPLC; attach the spectrum and the chromatogram.” - “Loss on drying ≤0.5%; pH 5.0–7.0 in 1% solution.” - “No D-proline above the agreed limit by chiral HPLC.” - “No hydroxyproline above the agreed limit by HPLC.” - “Particle size: at least 95% through 40 mesh, with the metals and microbiology panel in the specification.” ## Questions to put to the supplier - Which enantiomer is this lot, and which CAS number appears on the certificate? - Under which solvent, concentration and temperature was the rotation measured, and what was the reading? - May I see the IR spectrum and the HPLC chromatogram, not just the assay figure? - Was chiral HPLC run on this lot, and what D-proline limit applies? - What is the loss on drying, and what basis was used for the assay? - If the result is disputed, would you join a re-test of the retained sample? Those six answers make an identity file; one assay percentage does not. The catalog specification is on the product page; the COA page walks through each certificate line; the grades page compares L, DL and D forms; the level-four comparison covers the hydroxylated analogue; the methods library explains the separation; the quality page describes the release file. ### 01 What the COA for L-threonine reports, and on what basis URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-threonine/coa/ Reviewed: 2026-11-19 An L-threonine certificate reports appearance, identification by infrared and HPLC, assay by HPLC on the dried basis, specific rotation, loss on drying, pH, heavy metals, microbiology and particle size. The assay measures how much threonine is present; the rotation assigns the L configuration, and the allo-threonine check covers the second stereocentre. The limits below are the catalog specification; the batch COA confirms a particular pack. In one lineThe assay measures the threonine peak; the rotation and the allo-threonine check fix the stereochemistry; the dried basis says what the percentage refers to. ## The certificate as a test report A certificate can be audited only when each line names the test, the method and the release limit. A row that says “conforms” without a method asks the reader to accept a conclusion. The identity line decides whether the material is threonine, and the rotation decides which stereoisomer. Identity, assay and physical limits · L-threonine | Parameter | Method | Release limit | Appearance | Visual | White crystalline powder | Identification | Infrared and HPLC | Conforms to the reference | Assay (dried basis) | HPLC | 98.5–101.5% | Specific rotation | Polarimetry, dried basis | -26.5° to -29.0° | Loss on drying | Gravimetric | ≤0.5% | pH (1% solution) | Potentiometry | 5.0–7.0 | Heavy metals | ICP-MS or ICP-OES | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh ## The dried basis, the HPLC method and the rotation The assay is reported on the dried basis. The laboratory measures the powder as received and divides by the dry matter; the loss on drying is the correction. The certificate should print the basis in the assay row and the loss on drying beside it, not hide either in a footnote. Threonine has no strong ultraviolet chromophore, so an HPLC assay needs a detection mode. Most methods derivatise the amino acid before the column, with ortho-phthalaldehyde, FMOC or AQC, and read ultraviolet or fluorescence; LC-MS/MS is the other route. “HPLC” without the derivatisation and detector does not say how the peak was measured. Ask for the chromatogram. Specific rotation belongs on the same dried basis, with the solvent, concentration, temperature and path length. The catalog window is -26.5° to -29.0°. The figure is consistent with L-threonine, but it is a weighted property: another stereoisomer can pull the reading while the assay still passes. Rotation is a gate, not a stereochemical proof. pH at 1% is 5.0–7.0, close to the isoelectric point of 5.60. A shift points to residual acid or alkali, a different salt or a blend. The catalog does not set an allo-threonine limit; agree one with the supplier. ## Release limit versus batch result The release limit is the boundary; the batch result is the measurement. They belong in separate columns with the method and basis. A result column filled with the range is a copy of the gate, not a record of the lot. What the result column should contain · L-threonine | Parameter | Release limit | Result column | Assay | 98.5–101.5% dried basis | A measured percentage, with the HPLC method and the basis | Specific rotation | -26.5° to -29.0° dried basis | A measured angle, with solvent, concentration and temperature | Loss on drying | ≤0.5% | A measured percentage | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot | Particle size | ≥95% through 40 mesh | The measured percentage through the sieve “Passes specification” is a conclusion the reader should be able to reach from the numbers. A heavy-metal total is not enough; the element that matters has to be visible, and a micro line needs a count and an absence statement. ## What moves between batches Fermentation and crystallisation move the assay, the colour and the trace impurities; drying moves the loss on drying; milling and sieving move the particle-size result. The 40 mesh line is a finishing specification, so it can change when the mill or the sieve changes without any change in the chemistry. Rotation is the line to watch between lots. A drift toward the edge of the window with a flat assay can mean a small D or allo fraction, a change in the polarimeter conditions or a different source. One edge result is not a rejection; a sequence is a supplier question. Colour is descriptive and easy to over-read. A white crystalline powder can pick up a grey or yellow tint from hot drying, iron contact or a dirty mill while the assay passes. Ask for the batch record before rejecting on appearance alone. The lot code on the certificate should match the pouch, the drum and the retained sample. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a rotation that does not fit, or a suspected serine or allo-threonine substitution. A targeted panel is enough: HPLC with the derivatisation and detector stated, specific rotation with the conditions, chiral HPLC for D-threonine, achiral HPLC for allo-threonine, LC-MS for the molecular weight, ICP-MS for the metals and a plate count. Ask the laboratory to report its detection and quantification limits. “Allo-threonine not detected” without a limit describes the method's sensitivity, not the sample. Keep the chain of custody: the sample tested should be the sample retained, and the report should identify the lot. When a result is contested, give the referee the retained sample and ask for tests that separate the stereoisomers. ## What to compare between suppliers Put six lines side by side: identity and CAS number; assay method and basis; rotation with conditions; allo-threonine and D-threonine results; water, pH and mesh; heavy metals and microbiology. Two quotations that agree on assay but differ on rotation or on the allo check are not describing the same specification. Six lines for a supplier comparison · L-threonine | Line | What to compare | Why it matters | Identity | L-threonine, CAS 72-19-5, C4H9NO3 | A DL or allo lot can be sold under a similar name | Assay | HPLC, 98.5–101.5% dried basis, with the detection mode | Method and basis set what the percentage means | Rotation | -26.5° to -29.0° dried basis, with solvent and temperature | Configuration is not visible in the assay | Stereochemistry | Allo-threonine result and limit; D-threonine by chiral HPLC | The second stereocentre is the threonine-specific risk | Physical | Loss on drying ≤0.5%; pH 5.0–7.0; ≥95% through 40 mesh | Water and mesh change the weigh-up and the fill | Contaminants | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg; micro panel | Release limits are part of the specification The certificate should name the manufacturer and the lot, and the lot code should match the pack and the retained sample. The catalog specification is on the L-threonine product page; the stereochemistry is taken further on the identity page; the forms are compared on the grade page; the HPLC method is described in the HPLC method note; the release workflow is on the quality page. ### 02 Food grade, feed grade or DL: choosing an L-threonine grade URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-threonine/grades/ Reviewed: 2026-11-19 L-threonine is offered as food and supplement grade, as feed grade, as the racemic DL form and as the allo diastereomer. Only the first is the material specified on this page. The grade changes the documentation, the stereochemistry and the label before it changes the assay. In one lineGrade in L-threonine is a decision about end use, stereochemistry and documentation, not a higher purity number. ## Why the form is the grade Purity and grade are separate questions. A 99% feed-grade lot and a 99% food-grade lot can share an assay and still differ in the contaminant panel, the documentation and the intended use. The DL form and the allo form are not grades of the same substance: they have different stereochemistry, different CAS numbers and different identity tests. Grade in this range means form, end use and file. The label follows the grade. A panel that says L-threonine describes the L amino acid; a panel that says DL-threonine describes the racemate; a feed label follows feed rules and does not become a supplement label because the powder is the same colour. A drum change without a label change is a labelling defect, not a grade upgrade. ## The grades and related forms side by side L-threonine grades and related forms | Form | Configuration | CAS | Assay and rotation | What it is for | Food and supplement grade | (2S,3R) | 72-19-5 | 98.5–101.5% dried basis; -26.5° to -29.0° | Capsules, tablets and powder blends | Feed grade | (2S,3R) | 72-19-5 | Feed-grade assay and feed dossier; rotation conforms | Animal nutrition | DL-threonine | Racemic: (2S,3R) and (2R,3S) | 80-68-2 | Racemic; rotation near zero | Reference and non-stereospecific work | L-allo-threonine | (2S,3S) | 28954-12-3 | Reference grade; about +8° to +10° in water | Reference standard and impurity marker The first two rows share a molecule and a CAS number; the difference is the file and the end use. The last two rows are different substances. A certificate that says “threonine” without the configuration has not named which row is being bought. ## Mesh, flow and the physical grade Food and supplement grade is a white crystalline powder, ≥95% through 40 mesh, with granulation on request. The mesh is a specification line, not a packing choice: a finer powder flows differently, dusts more and fills a capsule at a different weight. A granulated grade flows better but dissolves more slowly. Feed grade may be supplied at a different mesh or as granules; its physical specification belongs to the feed dossier and does not transfer to a supplement. Threonine dissolves in water and the solution is neutral; a 1% solution sits at pH 5.0–7.0. The dissolution rate depends on mesh and on the matrix. Test the grade in the intended process, not only in water. If threonine is one component of a powder blend, a mesh mismatch with the other components can segregate in a drum or on a stick line, so ask for the mesh and run a uniformity check. ## The label arithmetic and the assay basis A label that declares L-threonine needs the L form. A DL lot contains both enantiomers by definition, so it cannot be declared as L-threonine without naming the DL ingredient; the D fraction is not L-threonine. The same rule applies to a blend with L-serine: each amino acid is a separate ingredient and each amount is declared. The assay is on the dried basis, so convert it to as-is before weighing. Take a lot at 99.0% on the dried basis with 0.3% loss on drying: it contains 98.7% as-is, so a 500 mg label claim needs 506.6 mg of powder. That is arithmetic, not a batch result; use the lot's own figures. A feed premix follows feed labelling rules, and the food specification does not transfer to it. The grade also sets the overage question. A granulated or coarser lot may need a different fill weight to deliver the same amount, and a powder blend may lose material to dust. The weigh-up should start from the as-is assay and the mesh, not from the label claim alone. ## What to write into the specification - “L-threonine, CAS 72-19-5, C4H9NO3, (2S,3R)-2-amino-3-hydroxybutanoic acid.” - “Food and supplement grade; assay 98.5–101.5% by HPLC on the dried basis; loss on drying ≤0.5%.” - “Specific rotation -26.5° to -29.0° on the dried basis, with solvent, concentration and temperature.” - “Identification by infrared and HPLC; report the allo-threonine result and the limit agreed.” - “Particle size ≥95% through 40 mesh; granulated on request; pH 5.0–7.0 at 1%.” - “Heavy metals and microbiology as listed; food-grade documentation with the lot.” We supply the food and supplement grade. Feed grade, DL-threonine and L-allo-threonine are separate purchases and should not be substituted without a written change control and a label check. ## When the other grade is the wrong choice Feed grade is the wrong choice for a human supplement: the feed dossier is not a food file, and the contaminant and labelling questions are different. DL-threonine is the wrong choice when the label names L-threonine: half the material is the D enantiomer, and the label, the assay and the identity file no longer match. L-allo-threonine is a reference material or an impurity marker, not a substitute for the L form; a lot with a high allo content is a stereochemical failure, not a grade. Granulation is the wrong choice when the process needs a fine powder for dissolution or uniformity. The mesh is part of the specification, and a change from 40 mesh to a granulated grade is a change control, not a packing note. The catalog specification is on the L-threonine product page; the certificate lines are explained on the COA page; the stereochemistry is taken further on L-threonine vs L-serine; the tests that separate the forms are on the identity page; the market file is on the compliance page. ### 02.1 L-threonine vs L-serine: one methyl group, two stereocentres URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-threonine/grades/l-threonine-vs-l-serine/ Reviewed: 2026-11-19 L-threonine and L-serine are both neutral amino acids with a hydroxyl side chain, but they are different ingredients. Threonine is 2-amino-3-hydroxybutanoic acid (C4H9NO3, 119.12 g/mol) with two stereocentres; serine is 2-amino-3-hydroxypropanoic acid (C3H7NO3, 105.09 g/mol) with one. The extra carbon changes the molecular weight, the number of stereoisomers, the identity tests and the label. In one lineOne methyl group gives threonine a second stereocentre, a different molecular weight and identity tests that serine does not need. ## Two hydroxyl amino acids, one carbon apart Both are α-amino acids with a hydroxyl side chain. The hydroxyl is not ionisable at food pH, so both are neutral and both solutions sit near pH 5–7. Threonine's side chain is -CH(OH)CH3, a secondary alcohol; serine's is -CH2OH, a primary alcohol. That is one carbon and two hydrogens more, and it raises the molecular weight by 14.03 g/mol. L-threonine and L-serine · structure and constants | Property | L-threonine | L-serine | CAS number | 72-19-5 | 56-45-1 | Formula | C4H9NO3 | C3H7NO3 | Molecular weight | 119.12 | 105.09 | IUPAC name | (2S,3R)-2-amino-3-hydroxybutanoic acid | (2S)-2-amino-3-hydroxypropanoic acid | Side chain | -CH(OH)CH3 | -CH2OH | pKa (carboxyl / amino) | 2.09 / 9.10 | 2.19 / 9.21 | Isoelectric point | 5.60 | 5.68 | Stereocentres | 2 | 1 | Nitrogen content | 11.76% | 13.33% The isoelectric points are close, so pH is not a way to tell the two apart. Nitrogen content differs by about 1.6 percentage points, and the molecular weight differs by 14 units, which LC-MS sees at a glance. Serine sits between alanine and threonine in size: removing its hydroxyl gives L-alanine, and adding a methyl to the β-carbon gives threonine. The three are easy to confuse as white powders, which is why the certificate has to name the molecule. ## Two stereocentres against one Threonine has stereocentres at C2 and C3. L-threonine is (2S,3R); the other three isomers are D-threonine (2R,3S), L-allo-threonine (2S,3S) and D-allo-threonine (2R,3R). Serine has one stereocentre at C2: L-serine is (2S), D-serine is (2R), and there is no allo form. The allo pair are diastereomers, not enantiomers. They have different physical properties and different NMR spectra, and an achiral HPLC method can separate them. L-threonine and D-threonine are enantiomers; they behave identically on an achiral column and need rotation or chiral HPLC to separate. That is the extra identity burden that threonine carries and serine does not. Specific rotation in water is about -28° for L-threonine, +8° to +10° for L-allo-threonine and -6.8° for L-serine in water (the sign is positive in dilute HCl). A mixture's rotation is a weighted sum, so a serine or allo fraction pulls the reading toward zero. The catalog range -26.5° to -29.0° is a gate, not proof that the allo fraction is absent. ## The tests are not the same Identity questions for L-threonine and L-serine | Question | L-threonine | L-serine | Is the amino acid the named one? | Infrared, HPLC retention, LC-MS at m/z 120.1 | Infrared, HPLC retention, LC-MS at m/z 106.1 | Is it the L enantiomer? | Specific rotation and chiral HPLC | Specific rotation and chiral HPLC | Is the allo form absent? | Achiral HPLC and NMR | Not applicable; serine has no allo form | Is the assay specific? | HPLC with derivatisation; nitrogen alone is not specific | HPLC with derivatisation; nitrogen alone is not specific Infrared distinguishes the two molecules in the fingerprint region, and it can distinguish L-threonine from L-allo-threonine because diastereomers have different spectra. It cannot distinguish L-threonine from D-threonine. HPLC retention separates threonine from serine if the method is designed for it; a method that integrates one peak and calls it threonine has not shown the separation. LC-MS confirms the molecular weight: the protonated threonine ion is at m/z 120.1 and the serine ion at m/z 106.1. A titration or a Kjeldahl nitrogen result cannot tell them apart, because both have one carboxyl group and one amino group. The nitrogen figure differs, but a nitrogen result is a screen, not an identity test. ## Assay methods and the detection mode Neither amino acid has a strong ultraviolet chromophore, so an HPLC assay usually starts with derivatisation. Ortho-phthalaldehyde, FMOC or AQC chemistry with ultraviolet or fluorescence detection is the common route; LC-MS/MS is the alternative. An ion-exchange amino acid analyser with ninhydrin is another valid method. The certificate should name the reagent and the detector, not only the word “HPLC”. The assay basis matters as much as the method. A 98.5–101.5% result on the dried basis is not 98.5–101.5% as-is; the loss on drying, ≤0.5%, is the difference. The serine specification has its own range and basis, and the threonine range should not be carried across to it. A method that separates threonine from serine is also the method that can reveal a substitution. Ask for the chromatogram and the peak purity, not only the percentage. That is the evidence a buyer needs when a lot is disputed, and it is the reason the method belongs in the specification rather than in a side note. ## Two names, two ingredients L-threonine and L-serine are separate ingredients. A label that names one cannot be satisfied by the other, and a blend that contains both must declare both amounts. In the EU, the ingredient list names each amino acid; in the US, the Supplement Facts panel lists each dietary ingredient and its amount per serving. The exact format depends on the market and the product. The stereochemistry is part of the name. “L-threonine” is the ingredient; a DL-threonine lot is not a substitute, and L-allo-threonine is not a grade of either. For serine, “L-serine” is the commercial form. A specification that says only “threonine” leaves the configuration open. The dose arithmetic follows the form. If a formula uses both, the sum is not a single “hydroxyl amino acid” figure; each is weighed and declared on its own. If a claim names one, the evidence has to be for that ingredient, not for the pair. ## When to choose which Choose L-threonine when the label names threonine, the formula is built on the essential amino acid, or the specification calls for the (2S,3R) form. Choose L-serine when the label names serine and the formula is built on it. The two are not interchangeable by weight, by assay or by label. If the formula uses both, write both into the specification, test both and declare both. A supplier who offers “hydroxyl amino acids” as a category has not specified either ingredient. The decision is a label and specification decision, not a purity comparison. The certificate, the specification and the label should use the same name, the same CAS number and the same stereochemistry. The catalog specification is on the L-threonine product page; the forms are compared on the grade page; the identity tests are on the identity page; the analytical methods are indexed under methods; the release workflow is on the quality page. ### 03 L-threonine keeps dry; moisture, heat and reducing sugars set the rest URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-threonine/stability/ Reviewed: 2026-11-19 Dry L-threonine is chemically stable in a sealed pack. The failures that matter are moisture uptake and caking, heat and reducing sugars driving Maillard browning, and microbial growth in an aqueous solution. The shelf life belongs to the pack and the matrix, not to the molecule alone. In one lineA sealed dry pack keeps L-threonine stable; moisture, heat and reducing sugars are what limit the shelf life of the powder and the formula. ## The dry solid and the opened pack Threonine is a crystalline amino acid with a hydroxyl side chain, not a reactive thiol or a double bond, so the dry solid is stable when it stays dry. The practical risks are physical and chemical: water uptake at the surface, caking under load, colour change after hot drying, and Maillard browning in a blend that contains a reducing sugar. The certificate's loss on drying, ≤0.5%, is a release limit, not a storage allowance. Keep the sealed pouch or drum cool and dry, away from odours and direct sunlight. Let a cold pack reach room temperature before opening so condensation does not form on the powder. Once opened, close the liner, expel air, write the opening date and use the remainder within the site's re-test window. A desiccant helps in a humid climate but cannot repair a folded seam. Maillard browning needs water activity, heat and a reducing sugar. A dry blend at low water activity reacts more slowly than a syrup or a wet granulation, but a warm warehouse and a hygroscopic partner can still move it. The first sign is a yellow-brown tint and a loss of threonine by assay; the appearance line is not sensitive enough to catch it early. ## The solution and the wet process An aqueous threonine solution is a nutrient medium. Preservation, pH, filtration or heat treatment, and the hold time before filling decide whether it stays in specification. A clear solution at day zero is not a stability result. Chemistry adds two risks. Heat at alkaline pH can racemise the amino acid, and reducing sugars can react with the free amino group in a Maillard pathway, especially at neutral to alkaline pH and at pasteurisation or hot-fill temperatures. The effect at food pH is usually small, but it belongs in the process validation. Threonine has no special light sensitivity, but the pack still protects the matrix. If the formula contains a light-sensitive vitamin or a colour, threonine is not the limiting ingredient, and the protocol should follow the ingredient that is. ## The factors that decide the outcome What moves L-threonine in storage and in a formula | Factor | What it does | What to control | Moisture and humidity | Surface water, caking and loss on drying; enables Maillard browning in a dry blend | Sealed liner, desiccant where needed, a dry packing room | Temperature | Drives drying and colour; heat with alkaline pH can racemise the amino acid | Cool storage and short heat exposure | Reducing sugars | React with the free amino group and brown the powder or the liquid | Compatibility work and a finished-product test | pH | Moves the solution away from the 5.0–7.0 window and changes the Maillard rate | Buffer the matrix and check the final pH | Microbiology | An aqueous solution supports growth; a dry powder does not | Preservation, filtration, heat treatment and hold-time validation | Packaging | The seam and liner decide the moisture barrier; the opened pack is a different pack | Foil pouch, lined drum, sealed seam and a closed liner Moisture and temperature can be studied on the raw material; reducing sugars, pH, microbiology and packaging appear only in the finished product. A raw-material stability summary cannot replace a finished-product study. ## A protocol that answers the question A workable design has three conditions and one shared test panel. Long-term: 25 °C and 60% relative humidity. Intermediate: 30 °C and 65% relative humidity. Accelerated: 40 °C and 75% relative humidity. Test at 0, 3, 6, 12 and 24 months for long-term and at 0, 1, 2, 3 and 6 months for accelerated. ICH Q1A(R2) is a useful reference for the design; it is not a legal requirement for a food supplement, and the destination market may ask for something different. Test the parameters that can fail: appearance, assay on the dried basis, specific rotation, loss on drying, pH, allo-threonine and related substances, and microbiology. Add the finished-product checks that matter: uniformity, dispersion or dissolution, flavour and colour where relevant. Test the market pack, not a laboratory jar, because the seam and the liner are part of the result. Run the study on the worst-case matrix and pack. Bracketing across pack sizes is acceptable when the smaller and larger packs use the same materials; a different liner is a different study. Keep the raw data and the deviation record. ## Capsules, sticks, liquids and granules Capsules and tablets: water and mesh control fill weight, flow and capping. A granulated grade may run better, but it changes the dissolution and the mesh in the specification. Powder sticks and dry blends: the stick's foil is the moisture barrier, and the blend's components can segregate. Test uniformity at the start, middle and end of the run, and test the stick after accelerated humidity. A reducing sugar in the blend is the Maillard risk. Liquids and premixes: pH, preservation and heat hold are the variables. A threonine solution is a microbial substrate, and a clear liquid is not evidence of stability. Wet granulation: water and heat arrive together. Dry the granule back to the loss-on-drying limit, and re-check assay, rotation and colour after the process, because a granulation step can change all three. ## Assigning a shelf life A shelf life is assigned from data, not from a default. The supplier's stability summary should name the pack, the matrix, the conditions, the test panel and the time points behind the date. A 24-month date is common for a sealed dry powder, but it is a conclusion, not a starting assumption. Do not extend a date because a new lot passes its release tests. Extension needs stability data on the same pack and matrix, and a raw-material date does not transfer to a finished capsule or stick. The storage statement on the label should match the study: temperature range, dryness and the instruction to keep the pack closed. The release tests that feed the protocol are on the COA page; the pack sizes are on the MOQ page; the storage and labelling rules are on the compliance page. The product hub carries the catalog specification, the plate count is described in the microbiology method note, and loss on drying is defined in the glossary. ### 04 L-threonine: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-threonine/moq/ Reviewed: 2026-11-19 L-threonine starts at 1 kg in a foil pouch, with a 25 kg fiber drum for production. The published lead time is 1–7 days once the specification and the order are fixed. Form, mesh, pack and destination turn that baseline into a quotation. In one lineThe 1 kg pouch is the qualification unit: it carries a lot number, a certificate and enough material for a trial and a retained sample. ## Why the minimum is one kilogram One kilogram is the smallest pack that remains tied to a lot number. It covers a bench trial, a repeat run after a formula change and a retained sample for the project. A smaller amount is a hand sample: enough to look at, not enough to release a lot or compare two suppliers. The minimum is a pack, not a bulk threshold. A buyer who needs 500 g is better served by a sample than by a split pouch, because a split loses the sealed seam and the lot label. A buyer who needs 30 kg takes a drum plus pouches; the drum has its own liner and freight profile. Threonine is a single crystalline material, so the 1 kg unit does not change with the mesh; a milled or granulated lot still fills a 1 kg pouch. What changes is the sample and the trial run, which should use the same mesh as production. ## The packs and what each one protects Standard packs · L-threonine crystalline powder | Pack | Net weight | Construction | Typical use | Watch | Foil pouch | 1 kg | Foil laminate, heat-sealed seams | Trial batch, retained sample, small run | A folded top is not a seal | Fiber drum | 25 kg | Fiber drum with a sealed inner liner | Full-scale production | The liner is the barrier, not the drum wall | Granulated powder | On request | Granulated, same chemistry | Flow and dust control | The particle profile changes | Split sample | On request | Repacked from a bulk lot | Bench trial | Traceability is not the original pack The pack label should show the product, form, lot, net weight and pack date, and the lot string must match the certificate. A desiccant can supplement the liner in a humid climate, but it cannot repair a seam that was folded rather than sealed. Non-standard packs are quoted, not stocked. Threonine is not classified as dangerous goods, so the pack is about protection, not transport class. The pouch is the unit a lab can open without touching a drum; the drum is the unit a production run draws from. Once a drum is opened, close the liner and write the date on the label. ## Lead time The clock starts when the specification and the order are fixed. An enquiry is not a confirmation, and a PO against a different specification resets the clock. The standard 40-mesh pack moves within the published 1–7 days; a custom mesh or granulation starts when the line schedules it, not when the email arrives. Paperwork runs alongside production. A destination that asks for a certificate of origin, a local-format SDS or a third-party test will not ship on commercial documents alone, so agree the document list before the PO. A public holiday in the shipping week adds a week in practice. State the required delivery date and the delivery term at enquiry, not after the PO. The lead time is a production and packing number; freight transit is separate. ## What the quotation needs A quotation is comparable only if it answers six questions. “L-threonine 99%” plus a weight is not enough, because two suppliers can mean different forms, basis and packs. - Identity and form: L-threonine, CAS 72-19-5, the (2S,3R) form, not a DL or allo lot. - Specification: assay method and basis, rotation, allo-threonine limit, loss on drying, pH, mesh, contaminants and micro, plus the version that will be released against. - Particle size and processing: 40 mesh standard, granulated, or a custom mesh. - Quantity and pack: the number of 1 kg pouches, 25 kg drums or both, and whether a desiccant is required. - Destination and delivery term: so freight, documents and transit are quoted on one basis. - Documents and extra tests: COA, TDS, SDS, origin, allergen, GMO and animal-derived input statements, plus a third-party rotation or chiral check. A quote that omits the basis or the mesh is a number for an unspecified powder. Ask for the specification version and the lot range behind the offer. ## Samples Ask for material from the lot that will be supplied, with the same lot number on the bag and the certificate. Confirm it was drawn before sealing, not scooped from an opened drum. Order enough for the trial and a retained portion; a second request adds time. The sample is where the certificate stops and the powder starts: flow, dispersion, caking after a week on the bench, colour against the last lot. For L-threonine, check the mesh in the intended process and run a blend uniformity trial if the material will be mixed. Record the sample lot, the date and the storage conditions. A sample kept in a warm office is not representative of a drum in a cool warehouse. ## Where the terms stop Payment, delivery term, validity and the document list belong in the quotation. This page covers the minimum, the packs and the lead time; the commercial terms sit in the offer. The minimum is quoted per line, so a mixed order is broken into separate lines. Three clauses are worth spelling out in the PO. The specification governs release, so a different mesh, water limit or form means a fresh specification and a fresh quotation. The certificate belongs to the lot, so the same lot code should appear on the certificate, the pack and the invoice. And the form has to be named: a PO for L-threonine should not accept a DL or allo lot. Add the shelf life remaining at shipment if the material will be held, and the non-conformance route if a result falls outside the specification. A change of source or manufacturing route is a change to the file, not a detail to discover at the next audit. The release tests are on the COA page; the form choices are on the grade page; moisture behaviour is on the stability page; market requirements are on the compliance page. The product hub carries the catalog specification, MOQ and lead time are defined in the glossary, and the shipping terms sit on the logistics page. ### 05 The regulatory file for L-threonine, market by market URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-threonine/compliance/ Reviewed: 2026-11-19 A specification for L-threonine is not a market authorisation. The EU, the US and the UK each ask a different question about the ingredient, the contaminants, the label and the claim, and the buyer's regulatory team confirms the route for the destination. In one lineA threonine specification is not a market authorisation: the route, the contaminant calculation and the label belong to the destination. ## The four checks Four questions decide whether a lot can be sold: is the ingredient permitted in that market and form; does the finished product stay under the contaminant limits; does the label name the ingredient and amount correctly; and is any claim authorised and substantiated? A batch certificate supports all four and replaces none. The operator placing the product on the market owns the file; a supplier's certificate is an input, not a defence. This is a sourcing reference, not legal advice. The file should name the specification version, the lot, the destination and the intended use, and the documents should carry version numbers rather than undated PDFs. Great Britain applies retained law, Northern Ireland follows the EU framework, and the two are checked separately. ## European Union Directive 2002/46/EC harmonises food supplements, but its Annex I positive list covers vitamins and minerals, not amino acids. L-threonine sits under general food law, Regulation (EC) No 178/2002, and any national rules the destination Member State applies. It has a history of use in food, but the novel-food position still has to be checked for the form and the use; Regulation (EU) 2015/2283 and the EU Novel Food Catalogue are the starting points. There is no harmonised maximum level for threonine, and some Member States apply their own notification or composition rules. The supplement particulars come from Directive 2002/46/EC, and the general labelling rules from Regulation (EU) No 1169/2011. A blend of threonine and serine is two amino acids, each of which has to be permitted and declared; the pair does not create a new ingredient. Regulation (EU) 2023/915, which applies from 25 May 2023, replaced Regulation (EC) No 1881/2006. Its limits apply to the product as sold, not to the drum, so a raw-material specification needs headroom for the finished dose and method uncertainty. Check the current consolidated text before the label is fixed. ## United States L-threonine is a dietary ingredient under DSHEA. The supplier should support that it was marketed in the US before 15 October 1994; such an ingredient does not need a new dietary ingredient notification. The product is made under 21 CFR 111 and labelled under 21 CFR 101.36. The FDA does not approve supplements before sale, so the file is the evidence. A structure/function claim is allowed if truthful, accurate and substantiated, with the DSHEA disclaimer in 21 CFR 101.93 and an FDA notification within 30 days of marketing. A disease claim is outside that route, and advertising is subject to FTC substantiation. In a blend, each amino acid is a dietary ingredient; the Supplement Facts panel should identify each one and its amount. A proprietary-blend format has its own rules in 21 CFR 101.36, so check the current text. ## Contaminant limits Heavy-metal limits for a food supplement · EU, US and UK | Metal | EU · 2023/915 | US federal | UK retained | Lead | 3.0 mg/kg | No numeric federal limit | 3.0 mg/kg | Cadmium | 1.0 mg/kg (3.0 for seaweed-based) | No numeric federal limit | 1.0 mg/kg | Mercury | 0.10 mg/kg | No numeric federal limit | 0.10 mg/kg | Arsenic | No harmonised limit; buyer sets one | No numeric federal limit | No harmonised limit; the buyer sets one The catalog limits are Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg. Lead, cadmium and mercury sit at or below the EU and UK ceilings; arsenic is a buyer-set limit. The EU and UK figures apply to the food as sold. US federal law has no numeric ceiling for these metals in supplements; cGMP applies. California's Proposition 65 sets daily exposure levels, including 0.5 µg/day for lead, 4.1 µg/day for cadmium and 10 µg/day for inorganic arsenic, so a dose can require a warning even when no federal limit is broken. ## The claim boundary In the EU and UK, a health claim must be authorised and appear in the applicable Register; Regulation (EC) No 1924/2006 also requires it to be truthful, clear and substantiated. As of this review, neither Register lists an authorised claim for L-threonine as such. A composition statement such as “99% L-threonine” is not a health claim, but it must match the assay and basis. In the US, a structure/function claim is possible under DSHEA with the disclaimer and the notification, but a disease claim is not. In all three markets the claim must describe the product, not a disease, with evidence in the file. A protein claim is not a threonine claim: threonine is a free amino acid ingredient, and the protein content of the finished product is a separate calculation. A claim about a body function needs its own authorisation or substantiation, and the certificate does not approve it. ## The document file Documents a brand should hold for an L-threonine lot | Document | What it supports | Market | Batch certificate of analysis | Release against the specification, with methods and results | All | Specification | The agreed limits, methods and basis | All | Technical and safety data sheets | Solubility, mesh, handling, pack and hazard information | All | Allergen, GMO and TSE/BSE statements | Composition and labelling declarations | EU, UK, US | Origin and manufacturer statement | Traceability and the source route | All | Heavy-metal and micro reports | The contaminant and hygiene envelope | All | Packaging food-contact declaration | The pouch or drum in contact with the powder | EU, UK, US | Novel food or dietary ingredient statement | The market entry position for the form | EU, UK, US ## The checklist - Name the form and CAS 72-19-5; a DL or allo lot is a different ingredient. - Confirm the market entry position: EU Member State rules, the US pre-1994 basis, the UK retained position. - Set raw-material limits below the finished ceiling, including an arsenic limit. - Check the daily dose against the figures and, in the US, Proposition 65 levels. - Match the label name and amount to the certificate and PO. - Check every claim against the Register or the DSHEA route. - Collect documents against the lot number, not the product name. - Check the Member State notification rule and any Northern Ireland sale. The release tests behind the file are on the COA page; the form choice is on the grade page; identity evidence is on the identity page. The product hub carries the catalog specification, the market notes are in the EU and US references, and the metals are described in the ICP-MS method note. ### 06 How we prove an L-threonine lot is the right stereoisomer URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-threonine/identity/ Reviewed: 2026-11-19 An L-threonine lot is the named material only when four identity lines agree: the record names L-threonine and CAS 72-19-5, infrared and HPLC show the threonine molecule, specific rotation and chiral HPLC assign the L configuration, and an achiral HPLC or NMR check covers the allo diastereomer. The assay and the mass balance then have to close; the assay alone cannot do it, because serine, allo-threonine and D-threonine can all lift a non-specific assay. In one lineThe record names the material, the chromatogram separates it from serine and allo-threonine, the rotation fixes the L form, and the mass balance closes the assay. ## The identity layers A certificate becomes identity evidence only when the layers agree on the same lot. Work from the paper record to the instrument, then to the configuration, then to the powder. Identity layers for L-threonine and what each one misses | Layer | Question | Test | What it proves | Record | What the lot is meant to be | Name, CAS 72-19-5, formula, lot code | Paperwork only | Molecule | Is the amino acid threonine? | Infrared, HPLC retention, LC-MS | The molecule, not its stereochemistry | Configuration | Is it the L enantiomer? | Specific rotation, chiral HPLC | The L form, not the allo fraction | Diastereomer | Is allo-threonine absent? | Achiral HPLC, NMR | The second stereocentre | Mass balance | Is the powder diluted? | Assay, loss on drying, residue | Consistency of the numbers A certificate that names the material and reports 99% has proved the record and maybe the assay; it has not proved the configuration or the allo fraction. Start with the assay and you are looking at the one number compatible with several failures. ## The ratio check: nitrogen, rotation and the allo pair Two ratios are worth calculating. The first is nitrogen content: threonine is 11.76% nitrogen and serine 13.33%. A serine cut raises the nitrogen figure in proportion; a D or allo cut leaves it unchanged. Kjeldahl or CHN is a screen, not an identity test, because the 6.25 factor used for protein is not the factor for a pure amino acid. The second is the rotation, which is a mass-weighted ratio. L-threonine is about -28° in water, L-serine about -6.8°, L-allo-threonine about +8° to +10° and D-threonine about +28°. A serine, D or allo fraction pulls the reading toward zero. The catalog window -26.5° to -29.0° catches a large cut, not a small one; it does not replace the chromatogram. The ratio of allo-threonine to L-threonine is the related-substance result. The catalog does not set a limit, so agree one and report it with the detection limit. A result of “allo-threonine not detected” without a limit describes the method, not the sample. ## The solid state and X-ray diffraction X-ray diffraction reads the crystal lattice. A crystalline L-threonine lot gives a pattern that can be compared with a reference; the pattern can separate a crystalline material from an amorphous blend or a different solid form. It is not a purity assay and it does not measure the enantiomer. Enantiomers share a powder pattern, so XRD cannot tell L-threonine from D-threonine. Diastereomers have different crystal structures, so L-threonine and L-allo-threonine can give different patterns if the references are available. That makes XRD a useful solid-state check for the allo question, not a routine release test. Ask for the reference pattern and the detection limit before reading a “match” statement. ## What substitution looks like Substitution routes for L-threonine and the test that catches each | Adulterant | What it does | Signal | Test | L-serine | Lower molecular weight; higher nitrogen | Second peak; nitrogen above 11.76% | HPLC, LC-MS, IR, CHN | L-allo-threonine | Same mass and nitrogen; different configuration at C3 | Rotation shifts positive; separate peak | Achiral HPLC, NMR, rotation | D-threonine or DL | Same mass and nitrogen; opposite configuration at C2 | Rotation moves toward zero | Chiral HPLC, rotation | Glycine or alanine | Different mass and retention | Extra peak; molecular ion differs | HPLC, LC-MS, IR | Dilution or moisture | Lowers assay; raises loss on drying | Mass balance does not close | Assay, loss on drying, residue Serine is the substitution a non-specific assay misses most easily: both are white, water-soluble and have one carboxyl and one amino group. The HPLC method has to separate them, and the certificate has to show the separation. The allo form is the substitution a rotation-only screen can miss; the achiral HPLC or NMR is the direct check. ## How to write the identity into the specification - “L-threonine, CAS 72-19-5, C4H9NO3, (2S,3R)-2-amino-3-hydroxybutanoic acid.” - “Assay 98.5–101.5% by HPLC on the dried basis; loss on drying ≤0.5%.” - “Identification by infrared and HPLC; report the chromatogram, the derivatisation and the detector.” - “Specific rotation -26.5° to -29.0° on the dried basis, with solvent, concentration and temperature.” - “Allo-threonine by achiral HPLC: report the result and the limit agreed.” - “D-threonine by chiral HPLC where the risk assessment requires it.” - “Particle size ≥95% through 40 mesh; heavy metals and microbiology as listed.” Three clauses carry the weight. “L-threonine” excludes the DL and allo forms. “Dried basis” blocks a silent water correction. The allo and D lines belong in the specification because an unwritten limit disappears when the supplier changes. ## Five questions to put to a supplier - Do the certificate and the pack name L-threonine, CAS 72-19-5, and the (2S,3R) configuration? - Which HPLC method and detection mode released the lot, and can you send the chromatogram and the peak purity? - What is the allo-threonine result, and what limit applies? - What rotation did this lot give, in which solvent, at what concentration and temperature, and on which basis? - Will you accept a joint re-test on the retained sample if the lot is disputed? Five direct answers amount to an identity file. A single assay percentage does not. The certificate that should carry those answers is described on the COA page; the forms are compared on the grade page; the comparison with serine is on L-threonine vs L-serine. The product hub carries the catalog specification, the separation is explained in the HPLC method note, and assay is defined in the glossary. ### 01 What a beta-alanine COA reports, and why no rotation appears URL: https://nutrition.rainwoodbio.com/products/amino-acids/beta-alanine/coa/ Reviewed: 2026-11-19 Beta-alanine is a three-carbon β-amino acid with no stereocentre, and that one structural fact changes what a batch certificate can say. The certificate for a lot reports appearance, identification by IR and HPLC, assay by HPLC, loss on drying, pH, heavy metals, microbiology and particle size. It does not report a specific rotation, because the molecule is achiral. The catalogue assay is 99.0–101.0%, and each line should show the method and the release limit beside the measured result. In one lineBecause beta-alanine is achiral, the certificate has no rotation line: identity rests on IR and HPLC, and the 99.0–101.0% assay is read with the moisture figure. ## The certificate as a short test report A beta-alanine certificate earns its place when a reviewer can read it without asking what a line means. Each parameter needs three things: the test, the method and the limit the lot was released against. The identity pair is IR and HPLC. Infrared shows the functional groups of an amino acid; the HPLC retention shows that the peak behaves like beta-alanine rather than another amino acid. Neither line alone identifies the material, and a retention time without a chromatogram is only a claim. Beta-alanine release tests | Test | Technique | Acceptance limit | Description | Visual | White crystalline powder | Identity | IR and HPLC versus a reference | Matches | Assay | HPLC | 99.0–101.0% | Moisture | Loss on drying, gravimetric | ≤0.5% | pH | 1% solution, potentiometric | 5.0–7.0 | Elemental impurities | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbial load | Colony count plus absence tests | Aerobic plate count ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve test | ≥95% through 40 mesh The rotation row is absent by design, not by omission. Beta-alanine has two hydrogens on its alpha carbon, so it is superimposable on its mirror image and cannot be L or D. A nonzero polarimetry result would point to something else in the sample, or to a template copied from an alpha-amino acid. ## The assay, the moisture and the missing rotation The assay window is 99.0–101.0%, narrower than the range used for many amino acids. The certificate should state the basis: a result on the dried basis and the same result as-is are different numbers, and at a 0.5% moisture limit the difference can reach half a percentage point. A powder reading 99.1% as-is with 0.4% loss on drying calculates to about 99.50% dried. Both pass, but the margin differs. The HPLC method itself needs checking. Beta-alanine has no strong ultraviolet chromophore, so a method that reads UV directly is unlikely unless the amino group has been derivatised. The certificate should name the derivatisation reagent and the detector, or state that the method uses refractive index or mass spectrometry. The method should also separate beta-alanine from L-alanine: the two are constitutional isomers with the same formula and the same molecular weight of 89.09, so a non-selective separation can report a total alanine figure that still lands inside 99.0–101.0%. The pH of a 1% solution, 5.0–7.0, supports the identity but does not prove it. The specific rotation that identifies an L-form is not available here, and a zero rotation would not be decisive either: DL-alanine also reads close to zero. The evidence has to come from the spectrum, the retention and the related-substance profile. ## Release limit and measured result The release limit is the boundary the lot was judged against; the result is the number the laboratory obtained. Put them in separate columns and name the method and the basis beside each one. A column that repeats the specification range has recorded the gate, not the measurement. From acceptance boundary to evidence · beta-alanine | Check | Boundary | Evidence expected | Identity | Matches the reference | The IR spectrum and the chromatogram, on file | Assay | 99.0–101.0% | A measured value, with its basis and method | Moisture | ≤0.5% | A measured percentage | Elements | A limit per element | A result for each element, in mg/kg | Microbiology | Counts and absence | The counts plus the absence statements | Particle size | ≥95% through 40 mesh | The percentage that passed the sieve For identity, a conformity statement is acceptable only if the spectra are available. For related substances, the result should be a figure for each impurity, with the limit of quantification; a total has hidden the isomer question. The catalogue panel does not carry a related-substances line, so that test is an agreed addition. ## What changes between lots Purification and crystallisation move the related-substance profile and the colour. Drying changes the moisture result; milling and sieving change the particle-size report, while the chemistry stays put. Those are ordinary movements. The line that deserves a trend is the L-alanine content: beta-alanine and L-alanine share a formula, so a rising L-alanine peak is the signal that the purification or the resolution step has changed. Moisture is second. A lot released at 0.45% has little headroom under the 0.5% limit, and a pouch opened in a humid room will move the as-is assay down. The dried-basis figure can stay correct while the powder as weighed is no longer at declared strength. Colour is a weak signal but not noise: an off-white batch can reflect the drying history while every chemistry line passes. The certificate's lot code must be the same code printed on the pouch or drum and on the retained sample; without that link the paper describes a material, not a shipment. ## When an outside test is worth ordering An outside test makes sense for a new source, a first regulated shipment, a disputed identity, a suspected blend, or a label that says beta-alanine while the certificate says only “alanine”. The useful panel is IR, HPLC assay with a documented resolution against L-alanine, related substances, loss on drying, ICP-MS for the heavy-metal panel and microbiology. NMR is the efficient second identity test because it shows two CH2 environments. XRD can help when the solid form is in question. The report should give the limit of quantification for every screen; a “not detected” result without one describes the method's sensitivity, not the sample. Chain of custody matters as much: test the retained sample, print the lot code on the report, and state the assay basis. ## Comparing offers line by line Line up six facts: name and CAS number; assay, basis and method; identity evidence with the L-alanine resolution; moisture and pH; contaminants and microbiology; pack and lot code. A quotation that says “beta-alanine 99%” without the method or the mesh has described an assay, not a purchase. The second layer is traceability: who made the lot, and which purification and drying steps were applied. The catalogue specification sits on the beta-alanine product page. The identity page covers the isomer tests, the grades page covers the powder, the methods library explains the chromatography, and release is set out on the quality page. ### 02 Beta-alanine grades: mesh, flow and the powder in the line URL: https://nutrition.rainwoodbio.com/products/amino-acids/beta-alanine/grades/ Reviewed: 2026-11-19 Beta-alanine is one molecule — C3H7NO2, CAS 107-95-9, with no stereocentre — so the grades on offer differ in the powder, not in the chemistry. The catalogue grade is a 40 mesh crystalline powder; a granulated grade is quoted on request. L-alanine has the same formula but a different structure, and it is a separate purchase rather than another beta-alanine grade. In one lineBeta-alanine has no enantiomer, so the grade question is physical — mesh, flow and dust — and L-alanine is a different molecule, not a grade. ## Two real grade questions, not three Buying an amino acid usually means answering three questions at once: which stereoisomer, which assay window, and which powder. Beta-alanine removes the first question. The name fixes the constitution, and there is no L or D version to specify; the catalogue range of 99.0–101.0% fixes the assay. What is left is the physical powder and the identity evidence behind it. That is why “beta-alanine 99%” is not a purchase order. It names an assay and leaves the mesh, the flow and the pack open. Two suppliers can both meet 99% and deliver powders that behave differently on the same filling line. The missing stereochemistry also removes a common phrasing error. “L-beta-alanine” is a contradiction, because the molecule has no chiral centre. L-alanine, DL-alanine and carnosine are different materials with their own CAS numbers; they belong in a comparison, not in a grade list. ## The catalogue forms and the lookalikes Beta-alanine forms and related materials | Material | What it is | CAS | Optical rotation | Role in a purchase | Beta-alanine, 40 mesh | Catalogue powder; ≥95% through 40 mesh | 107-95-9 | None; achiral | The standard grade | Beta-alanine, granulated | Granulated on request | 107-95-9 | None; achiral | A handling grade | L-alanine | Constitutional isomer; chiral alpha-amino acid | 56-41-7 | +14.0° to +15.0° | A different ingredient | DL-alanine | Racemic alpha-alanine | 302-72-7 | About 0° | Not a substitute | Carnosine | Dipeptide of beta-alanine and L-histidine | 305-84-0 | +20.0° to +22.0° | A different ingredient The first two rows are the same substance in two physical states. The other three are included because a quotation that says only “alanine” leaves the buyer to guess which row is on offer. The rotation column separates the chiral lookalikes from beta-alanine, though a zero reading alone does not distinguish beta-alanine from DL-alanine. ## What the powder does in the room A 40 mesh specification means at least 95% of the powder passes a 40 mesh sieve; the rest may be coarser. The sieve cut is a finishing line, not a chemical one. Change the mill and the particle-size report changes while the assay and the identity stay where they were. Milling finer gives faster dispersion and better mixing, and it makes dust. A fine powder coats the inside of a blender, hangs in the air at the filling head and clings to a pouch. Granulation moves the other way: the particles are built up, the powder flows more freely and the dust falls. Bulk density and dispersion rate move with it, which matters when a capsule is filled by volume or a sachet by auger. Beta-alanine dissolves freely and gives a 1% solution at pH 5.0–7.0. Because the powder dissolves quickly, granulation is mainly a handling decision, not a solubility fix. A granule can still take longer to break up in a cold drink, so the dispersion should be checked in the actual liquid rather than assumed from the sieve report. Moisture is the storage variable behind caking; the loss-on-drying limit is ≤0.5%. ## Matching the grade to the dosage form A capsule or tablet needs a consistent fill weight and a powder that moves. The 40 mesh grade is the starting point; a granulated grade earns its place when the line runs fast, the powder bridges, or the hopper is open to a dusty room. For direct compression, ask for the particle-size distribution and the bulk density, not only the chemistry lines. A stick pack or a powder blend has a segregation problem: a fine fraction can separate from a coarse one in transit, so the distribution should be narrow enough to stay uniform. The same fine fraction that disperses well can leave a visible residue in the pouch. A gummy or a chew brings water and heat; beta-alanine cannot racemise, but it can take part in browning with a reducing sugar, and no sieve choice prevents that. The amount per serving is the brand's formulation decision, not a number that belongs on this page. The grade controls how the powder behaves before and during filling; the label and the regulatory file control what the finished product may say. ## What to put in the specification - “Beta-alanine, CAS 107-95-9, C3H7NO2; white crystalline powder.” - “Assay 99.0–101.0% by HPLC, with the basis and the detection mode stated.” - “Identity by IR and HPLC; related substances including L-alanine, with a limit and a method.” - “Loss on drying ≤0.5%; pH 5.0–7.0 in a 1% solution.” - “Particle size ≥95% through 40 mesh, or the line agreed for a granulated grade.” - “Achiral; no specific rotation is specified.” Use the same grade name on the specification and the quotation. An order for 40 mesh that arrives as a granulated powder may be good material and still the wrong purchase. ## When a different purchase is the right one If the label names L-alanine, buy L-alanine. The two share a formula and a molecular weight, so a total-amino-acid assay can look normal while the identity is wrong. The L-alanine page carries the other specification, and the identity page describes the tests that separate them. If the label names carnosine, buy carnosine. The dipeptide has its own CAS number, assay, rotation and label; the carnosine page and the beta-alanine vs carnosine comparison set out the difference. The mass arithmetic does not turn one into the other. If the problem is flow, dust or taste, check whether it belongs to the powder or to the line and the formula. A finer mesh will not fix a badly set filler, and a granulated grade will not fix a flavour. Catalogue values sit on the beta-alanine page; the COA page lists the release tests, the MOQ page lists the pack options, and the quality page describes the release workflow. ### 02.1 Beta-alanine vs carnosine: the precursor and the dipeptide URL: https://nutrition.rainwoodbio.com/products/amino-acids/beta-alanine/grades/beta-alanine-vs-carnosine/ Reviewed: 2026-11-19 Beta-alanine is a single amino acid: C3H7NO2, molecular weight 89.09, CAS 107-95-9. Carnosine is the dipeptide β-alanyl-L-histidine: C9H14N4O3, molecular weight 226.23, CAS 305-84-0, assembled from beta-alanine and L-histidine. The dipeptide contains a beta-alanine residue but is a different molecule with its own assay, rotation and label. One is not a grade of the other, and the mass arithmetic does not make them interchangeable. In one lineCarnosine contains a beta-alanine residue, but it is a different molecule with its own CAS number, assay, rotation and label. ## A peptide bond, not a blend Beta-alanine is a β-amino acid: its amino group sits on the beta carbon, one position further from the carboxyl group than in an alpha-amino acid. It has no stereocentre and is achiral. L-histidine is an alpha-amino acid with an imidazole side chain and one chiral centre in the L configuration. In carnosine, the carboxyl group of beta-alanine is joined to the alpha-amino group of L-histidine by an amide bond. The product is a dipeptide, not a salt and not a physical blend. There is no counter-ion to report and no free beta-alanine in a pure lot; the beta-alanine is present as a β-alanyl residue inside the larger molecule. Hydrolysis reverses the bond and returns one molecule of beta-alanine and one molecule of L-histidine. That reaction explains why a carnosine lot can develop free beta-alanine on storage; a dry beta-alanine powder has no peptide bond to break. ## The two materials side by side Beta-alanine and carnosine compared | Property | Beta-alanine | Carnosine | Chemical name | 3-aminopropanoic acid | β-Alanyl-L-histidine | CAS number | 107-95-9 | 305-84-0 | Formula | C3H7NO2 | C9H14N4O3 | Molecular weight | 89.09 | 226.23 | Composition | One β-amino acid | Dipeptide of beta-alanine and L-histidine | Chirality | Achiral; no rotation | Chiral at the histidine residue; +20.0° to +22.0° | Catalogue assay | 99.0–101.0% by HPLC | 98.0–101.0% by HPLC | Label name | Beta-alanine | L-Carnosine or carnosine The beta-alanine residue is part of carnosine, but the assay, the rotation and the label belong to the dipeptide. A buyer who needs beta-alanine has not bought carnosine, and a buyer who needs carnosine has not bought beta-alanine with a larger number on the certificate. ## The mass arithmetic, and what it does not mean One mole of carnosine (226.23 g) yields one mole of beta-alanine (89.09 g) on complete hydrolysis. One gram of carnosine therefore yields 0.394 g of beta-alanine, or about 394 mg. The reverse direction gives the stoichiometric equivalent: one gram of beta-alanine corresponds to 226.23 ÷ 89.09 = 2.54 g of carnosine. The bound β-alanyl residue is 89.09 − 18.02 = 71.08 g per mole, or 31.4% of the dipeptide mass. The dipeptide is about 31.4% β-alanyl residue, 60.6% histidyl residue and 8.0% the elements of water; hydrolysis adds that water and gives 39.4% beta-alanine and 68.6% histidine. The distinction matters when a calculation is made from the formula rather than from a certificate. None of this is a substitution factor. The arithmetic tells a formulator what one molecule contains; it does not turn a beta-alanine specification into a carnosine specification. A label that declares carnosine declares the dipeptide, and a label that declares beta-alanine declares the amino acid. If a product genuinely contains both, each is weighed and declared separately. Using the hydrolysis factor to “convert” one ingredient into the other would change the declaration and the market file, not just the number on the batch sheet. ## Two assays that do not substitute for each other Beta-alanine has no strong ultraviolet chromophore, so its HPLC method usually derivatises the amino group or relies on refractive index or mass spectrometry. Carnosine carries an imidazole ring and can be read at low ultraviolet wavelength, although a derivatisation method is also used. The two methods are not the same method with a different standard, and a certificate should name the detection mode and the column. The related-substance profile is different in each case. In a carnosine lot, free beta-alanine and free histidine are hydrolysis products and therefore degradation markers. In a beta-alanine lot, L-alanine is the isomer that a selective method has to separate. A laboratory that validates one method for both materials should show the resolution and the limit of quantification for each analyte, not a single peak at a shared retention time. The assay ranges also differ: 99.0–101.0% for beta-alanine and 98.0–101.0% for carnosine. A beta-alanine certificate at 99.5% does not describe a carnosine lot, and a carnosine certificate at 99.5% does not describe beta-alanine. The number is only meaningful with the name of the material and the method beside it. ## The label names one ingredient, not a source In the European Union the ingredient list uses the name of the ingredient as sold; in the United States the Supplement Facts panel names the dietary ingredient. “Beta-alanine” and “L-carnosine” are different declarations, and “carnosine” is not a synonym for beta-alanine. A product that wants to describe a source has to use a source claim that the destination allows, and that is a separate review from the ingredient identity. A carnosine certificate cannot support a beta-alanine declaration, and a beta-alanine certificate cannot support a carnosine declaration. Zinc-carnosine is a third material with its own specification, so it is not a substitute for either. The buyer's regulatory team confirms the route for the destination; this page makes no performance claim and no disease-related claim, and it does not assert a market status for either ingredient. ## What to write into each specification - Beta-alanine: “Beta-alanine, CAS 107-95-9, C3H7NO2; assay 99.0–101.0% by HPLC; identity by IR and HPLC; related substances including L-alanine; loss on drying ≤0.5%; pH 5.0–7.0; achiral, no rotation.” - Carnosine: “L-Carnosine, CAS 305-84-0, C9H14N4O3; assay 98.0–101.0% by HPLC; identity by IR and HPLC; specific rotation +20.0° to +22.0° on the dry basis; loss on drying ≤1.0%; free beta-alanine and histidine as related substances.” - Common line: “The material is the named ingredient, not a blend with, or a hydrolysate of, the other.” A purchase order that says “carnosine, beta-alanine source” names neither material cleanly. The specification should use one name, one CAS number and one assay, and the certificate should match all three. ## When the brief calls for one or the other Start from the label and the finished product, not from the list of powders on the shelf. If the label names beta-alanine, the specification is the free amino acid on the beta-alanine product page; if it names carnosine, the specification is the dipeptide on the carnosine product page. If both are declared, both are purchased and both have a certificate. A change from one to the other is a change of ingredient, not a change of grade. It needs a new specification, a new certificate, a label review and the destination market's file. The grades page covers the physical forms of beta-alanine; the L-alanine page covers the isomer that is most often confused with it; the methods library describes the chromatography; the quality page describes the release file that holds the evidence together. ### 03 Beta-alanine stability: the dry solid, the solution and the matrix URL: https://nutrition.rainwoodbio.com/products/amino-acids/beta-alanine/stability/ Reviewed: 2026-11-19 Beta-alanine is a crystalline solid with no stereocentre and no peptide bond, so two failure routes that matter for other ingredients — racemisation and peptide hydrolysis — do not apply to it. The storage risks are narrower: the powder can pick up moisture and cake, and an aqueous formula can support microbial growth or brown when a reducing sugar is present. The retest period is a property of the pack and the matrix. In one lineThe dry powder is the stable form; the pack, the moisture and the finished matrix set the retest period. ## The powder: water, caking and colour The release limit for loss on drying is ≤0.5%. A powder sitting at 0.42% has only 0.08 percentage points of headroom under that limit, and an opened pouch in a humid room will use it. The water is not always visible: a crystalline solid can hold surface moisture and still pour, while the as-is assay drifts down and the dried-basis figure stays correct. Caking is the later, more obvious sign. It appears first at the fold of the bag or at the bottom of the drum, where the powder has been under pressure and exposed to the headspace. Break up the caked layer and the powder may still pass the assay, but the physical grade has changed and the filling line will notice. The pack does most of the work. Keep the foil pouch sealed between uses, keep the drum liner closed, and store the drum off a concrete floor. If the pack has come from a cold container, let it reach room temperature before opening so that condensation does not form on the powder. Light is a secondary issue for this molecule, but an opaque or foil pack remains the sensible default. Colour is a weak signal. The catalogue describes a white crystalline powder; a cream or yellow tint can come from the drying step or from a trace impurity, and it is a reason to look at the assay and the related substances, not a reason to reject on sight. ## The solution: microbes and the matrix Beta-alanine dissolves freely and gives a 1% solution at pH 5.0–7.0. A clear solution is not a stable one. The amino acid feeds microorganisms, and a hold at ambient temperature needs a preservative, a filtration step or a cold chain. The hold time should be measured on the actual matrix; a figure borrowed from another beverage is not a validation. The molecule itself is less fragile in solution than an L-amino acid or a dipeptide. It cannot racemise, because it has no chiral centre, and it has no peptide bond to hydrolyse. The reaction to watch is with reducing sugars: the free amino group condenses with the sugar carbonyl, and heat pushes the mixture toward browning, a changed taste and a lower assay. Colour in a finished drink can also come from the flavour, the colourant or a trace metal. Before a beta-alanine lot is blamed for a shade change, check the matrix without it. That control sample is the difference between a stability finding and a guess. ## What moves the material during storage Storage variables for beta-alanine | Variable | Effect | Control | Water | Surface moisture, caking and a lower as-is assay | Sealed pack, dry room, closed liner | Heat | Faster browning in a sugar-containing mix | Cool process and a measured hold time | pH | Near-neutral solutions are the comfortable range | Check the matrix pH before the hold study | Reducing sugar | Maillard browning and loss of the amino acid | Lower the free sugar or the water activity | Microbes | Growth in an unpreserved aqueous hold | Preservative, filtration or cold storage | Sunlight | Not a primary degradation route for the solid | Foil or opaque pack by default The variables combine. A warm room and a humid atmosphere do more than either alone, and a sweetened drink at neutral pH brings the microbial and browning risks into the same bottle. The question to put to a stability study is therefore specific: which pack, which matrix, which condition, which time. ## Designing the stability work Start with the pack the customer will buy. Run one arm at 25 °C/60% relative humidity for the long term and a second at 30 °C/65% relative humidity for the intermediate condition; together they cover a warehouse. At 40 °C/75% relative humidity the seal and the powder come under pressure. A light-exposure arm is optional for the solid and more informative for a clear liquid. At each point, measure assay, loss on drying, appearance, pH, related substances and microbiology. Repeat the identity test as well: an identity failure is not repaired by a passing assay. There is no rotation result to trend, because beta-alanine is achiral — a specification that asks for one has imported a line from an alpha-amino acid. Report the individual results, not a single pass sentence, and tie each result to a pack and a lot family. A 1 kg pouch and a 25 kg drum differ in headspace and in how often they are opened, so data from one does not automatically support the other. Accelerated results can support a retest period; they do not replace the long-term arm. ## The finished product changes the answer A capsule or tablet keeps water activity low, though the shell and the fill's excipients can still exchange moisture. Test loss on drying after storage and inspect the fill. A wet-granulation tablet has already been through water and heat, so the granulation step is part of the stability history even though it is not on the certificate. A gummy is the harder matrix: water, heat and often a reducing sugar in one piece. The colour of the finished gummy is the first evidence, and the assay of the extracted ingredient is the confirmation. A stick pack lives or dies by its foil and seal. Inspect the strip as well as the powder, because a pinhole is a failure that the powder will not show. A beverage adds pH, preservative, heat and taste. An overage, if one is used, belongs to the label and stability review; it does not rescue a pack that admits moisture. The grade can change flow and dispersion, but it cannot change the reaction between the amino group and a sugar. ## Assigning the retest period There is no single shelf-life number for beta-alanine, because the number belongs to a pack and a storage condition. The retest period on the specification should point to a stability file for that pack, with the test panel and the time points named. A figure without that support is a claim. When the period ends, test the retained sample again before extending use. An extension needs that result; a bulk figure cannot be carried across to a repack. The beta-alanine product page lists the packs; the COA page gives the release tests; the MOQ page covers pack and lead time; the carnosine comparison explains the peptide-bond difference; the quality page sets out the release workflow. ### 04 Beta-alanine MOQ: 1 kg pouch, 25 kg drum and lead time URL: https://nutrition.rainwoodbio.com/products/amino-acids/beta-alanine/moq/ Reviewed: 2026-11-19 Beta-alanine is quoted from a 1 kg foil pouch, the minimum order, and from a 25 kg fiber drum for production. The catalogue powder is 40 mesh; a granulated grade is a separate quotation. Standard dispatch is 1–7 days after order confirmation. In one lineThe 1 kg pouch is the trial and qualification unit; the 25 kg drum is the production unit, and both carry the same lot code. ## The pack sets the minimum The 1 kg pouch is not a courtesy sample. It is the smallest unit that can be filled, sealed, given a lot code, sampled and shipped without being opened. A formulator can take a bench trial from it, keep a retained sample, and send a portion to an outside laboratory, all from the same traceable pack. Smaller quantities exist as repacks, not as catalogue packs. Once a kilo is split, the original seal and lot identity are gone, and the new container carries a new handling history. That is why the minimum is a pack decision: it protects the chain from the drum to the trial. The 25 kg drum is the other extreme: less handling per kilogram, but a larger commitment. It occupies storage, has to be opened and closed under control, and ties the buyer to a larger quantity of one lot. A first order that starts at 25 kg is a production decision, not a trial. Granulation is a third variable. The granulator is set up for the order, so the minimum for a granulated grade may differ from the 1 kg catalogue pouch. Ask for the grade and the pack in the same enquiry; a granulated offer against a 40 mesh pack is not a like-for-like comparison. ## Packs and what each one changes Beta-alanine pack options | Format | Net content | When it fits | What changes | Foil pouch | 1 kg | Trial, retained sample, small batch | Reseal after opening; lot code on the pouch | Fiber drum | 25 kg | Production | Inner liner; record the opening date | Granulated grade | On request | Dust control and fast filling | Particle-size line and bulk density move At 40 mesh, at least 95% of the powder goes through a 40 mesh sieve. A different mesh, or a granulated powder, is a different specification line, not a different bag. Write the grade and the pack together on the order; a 25 kg drum of granulated material is not the same purchase as a 25 kg drum of the catalogue powder. ## From confirmation to dispatch Dispatch is quoted at 1–7 days from confirmation. The clock covers picking, paperwork and handover to the forwarder, not air or sea transit, customs clearance, or the buyer's own quality release. A non-standard grade or pack adds time, and the quotation should show it as a separate line. A dispatch date is more useful than a lead time. Ask for it, and ask which documents travel with the lot. A drum usually travels on a pallet, a pouch as a parcel, and the Incoterm fixes who books the freight and clears the entry. If a production date depends on the material, say so before the order is placed, because transit is a separate clock. ## The six details a quotation needs A quotation can be compared only when these are on it: - The material, written out. Beta-alanine, CAS 107-95-9, with no L or D prefix. - The specification. Assay and basis, identity test, L-alanine limit, loss on drying, pH, particle size, heavy metals and microbiology. - The grade and the pack. 40 mesh or granulated; 1 kg pouch or 25 kg drum. - The destination and Incoterm. The country, the delivery point and the trade term. - The documents. COA, specification, SDS and whatever the importer needs for the market. - The intended use and market. Supplement, food or another route, and where it will be sold. If the grade or the market is missing, the quotation describes a powder but not a purchase. The same material can be suitable in one market and outside the file in another; that difference belongs in the offer, not in a later email. ## What the 1 kg pack is for The pouch is the qualification sample. Check identity, assay, loss on drying and microbiology on receipt, and keep part of it as the retained sample. The lot code on the pouch, the COA and the quotation should be the same code. A sample without that link is a demonstration. Use the rest in the process, not only on the bench: fill a trial capsule, run a blend, or make a stick pack. Flow, dust, dispersion and taste show up in the trial and not on the certificate. If a smaller bench quantity is needed, ask first; a split is a documented repack and not the catalogue pack. Do not assume that the trial pouch and the production drum come from the same lot. If continuity matters, reserve the production lot before the trial begins, or ask for the lot family in writing. ## What to settle before the drum arrives Commercial terms belong on the quotation; the quality terms belong in an agreement beside it. Name the specification revision, the COA per lot, the retained sample, the retest period, the change-control route and the referee laboratory. A change of mesh or granulation should go through the same route as a change of source. When a lot misses the agreed specification, a joint re-test on the retained sample decides the outcome; a photograph does not. Agree in advance who commissions the referee test and who pays for it. That clause settles the common dispute about a white powder. For the catalogue values, see the beta-alanine product page; for the release tests, see the COA page; for the market documents, see the compliance page. The MOQ glossary entry defines the term, the logistics page covers freight, and the quality page sets out the release workflow. ### 05 The regulatory file for beta-alanine URL: https://nutrition.rainwoodbio.com/products/amino-acids/beta-alanine/compliance/ Reviewed: 2026-11-19 Beta-alanine is the free β-amino acid, CAS 107-95-9, and the catalogue specification is the same wherever it is sold. What changes with the market is the route: a food ingredient, a food supplement and an additive are reviewed under different rules, and the buyer's regulatory team decides which one applies. This page maps the file and the documents; it does not decide the route. In one lineThe specification identifies the material; the destination file shows the route, the limits and the label that apply. ## A chain, not a folder A regulatory file works as a chain. The specification defines what is being bought; the lot certificate shows what arrived; the destination rule says whether and how it may be used; the label says what the consumer is told. Each link has an owner. The supplier owns the specification and the certificate, the buyer owns the route and the label, and the handover between them should be explicit. The name is the anchor of the chain. “Beta-alanine” is a different substance from L-alanine, DL-alanine and carnosine, and the file should use the name and the CAS number throughout. The product is the free amino acid, and there is no L or D prefix to settle, which removes one common source of paperwork; the identity risk moves to the isomer and to the dipeptide instead. The destination can split the file further. Great Britain and Northern Ireland are checked separately: the GB register and GB labelling rules apply in Great Britain, while Northern Ireland follows the EU framework. The buyer's team should say which one applies before the specification is fixed, and the file should record the answer. ## European Union The EU review starts with the general food law in Regulation (EC) No 178/2002, the labelling rules in Regulation (EU) No 1169/2011 and, for supplements, Directive 2002/46/EC. A flavouring use brings Regulation (EC) No 1334/2008 into the file instead of, or alongside, the supplement rules. The buyer's team identifies the route for the destination member state and checks that the specification matches the material being placed on the market. The novel-food question sits in Regulation (EU) 2015/2283. The team checks the history of consumption in the EU before 15 May 1997 and whether an authorisation or a notification is needed. A supplier page cannot answer that for a destination; the current Union list and the consolidated text are the references. The contaminant rules sit in Regulation (EU) 2023/915 at the time of writing. That text limits lead, cadmium and mercury in food supplements, with category notes; arsenic has no harmonised supplement maximum there, so a customer or market limit applies. Claims are reviewed under Regulation (EC) No 1924/2006. The current consolidated text governs, not a summary. ## United States For a dietary supplement, start with the dietary-ingredient definition in the Federal Food, Drug, and Cosmetic Act, as DSHEA amended it. An ingredient marketed in the United States before 15 October 1994 is not new; otherwise a premarket notification under 21 CFR 190.6 may be required. The supplier can provide identity, composition and manufacturing information; the legal determination belongs to the buyer. The finished product is made under the current good-manufacturing-practice rules in 21 CFR 111, and the Supplement Facts panel follows 21 CFR 101.36. A structure or function statement needs substantiation and the required disclaimer, and a disease-related claim is not permitted for a dietary supplement. A conventional food use is a different route with a different set of documents. Beta-alanine's name should appear on the panel exactly as the ingredient is identified in the specification. “Alanine” alone does not distinguish it from L-alanine or DL-alanine, and a panel that uses the generic word has left the identity open even when the certificate is correct. ## Contaminants and the serving calculation The catalogue limits apply to the powder, not to the finished product. The lot result is converted to the amount per serving and compared with the limit for the destination; the stricter of the two governs. A result that passes the drum can still fail the serving calculation when the amount per serving is large. Contaminant limits and the evidence a file needs · beta-alanine | Contaminant | Catalogue maximum | Evidence for the finished product | Lead (Pb) | ≤3 mg/kg | Measured result, method and serving arithmetic | Arsenic (As) | ≤2 mg/kg | Measured result and the agreed market limit | Cadmium (Cd) | ≤1 mg/kg | Measured result and any category exception | Mercury (Hg) | ≤0.1 mg/kg | Measured result and method The arithmetic is short: multiply the lot result by the ingredient mass per serving and divide by the finished-product mass. For a capsule, the mass is the fill weight; for a powder, the serving. Put the calculation in the file next to the certificate, so a reviewer can follow it without rebuilding it. ## Label and claim boundary The label names the material and the amount. For beta-alanine the name should be written out, not shortened to “alanine”, and it should not carry an L or D prefix. The ingredient list, the Supplement Facts panel, the specification and the certificate should agree on the name and the CAS number. The claim review is a separate process with its own rules: Regulation (EC) No 1924/2006 in the EU, the structure or function framework in the US, and the destination's own rules elsewhere. This page makes no performance claim and no disease-related claim, and a supplier's certificate does not approve a claim. The brand's reviewer decides what the finished product may say; the specification does not change because a claim is added. ## The document set Documents in a beta-alanine file | Document | What it must show | Specification | Name, CAS, grade, assay basis, identity tests and related-substance limits, with a version and date | Batch certificate | The measured results for the lot, the methods, the related-substance results and the lot code | Technical and safety data sheets | The specification summary and the handling information | Allergen, GMO and origin statements | The declarations the destination or the customer requires | Residual-solvent statement | The solvents used in the process and their limits | Intended-use statement | The route and the market the file is meant to support The documents should tell one story. A certificate that reports a granulated powder against a 40 mesh specification, or a label that names “alanine” against a beta-alanine certificate, is a mismatch even when each document is internally correct. Keep a version list; a folder of undated PDFs cannot be tied to a specification revision. ## Checks before the first order - The specification names beta-alanine, CAS 107-95-9, and the grade, with a version and date. - The certificate reports identity, assay with its basis, and the agreed L-alanine result. - The contaminant results are converted to the finished-product serving. - The destination route and the label have been reviewed by the buyer's team. - Allergen, GMO, origin and residual-solvent statements are on file. - Source, process, grade and pack are under change control. Start with the beta-alanine page for the catalogue values. The COA page covers the lot certificate, the identity page covers the isomer tests, and the quality page covers release. Framework notes are held in the regulatory library. ### 06 How to prove a beta-alanine lot is the named material URL: https://nutrition.rainwoodbio.com/products/amino-acids/beta-alanine/identity/ Reviewed: 2026-11-19 Identity for beta-alanine is a question about constitution, not about chirality. The molecule has no stereocentre, so there is no L form to confirm and no rotation to read; the useful evidence is the name and CAS number, the IR spectrum, the HPLC retention with the L-alanine ratio, and a mass balance. A lot that passes only the assay has not been identified. In one lineBeta-alanine has no stereocentre, so identity rests on the spectrum, the retention and the mass balance, not on a rotation. ## What each check can and cannot prove A certificate's identity section can look complete and still answer only one question. The table separates the checks by the question they answer and by the limit of what they show. Read it as a set of independent gates, not as a list of alternatives. Identity checks for beta-alanine and their limits | Check | Question | Evidence | What it cannot show | Paper | Is the material named correctly? | Name, CAS 107-95-9, formula | Anything about the powder | Infrared | Is the functional-group pattern right? | Spectrum against a reference | The isomer ratio | Chromatography | Is it separated from L-alanine? | Retention and resolution against a standard | Purity by itself | Diffraction | Is the solid form consistent? | Pattern against a reference | The amount of an impurity | Balance | Is the powder wet or diluted? | Assay, loss on drying, related substances | Which isomer is present Two or three checks together are stronger than any one. A blend of beta-alanine and L-alanine can pass the paper, the appearance and a total-amino-acid assay; it is the chromatographic ratio and the spectrum that expose it. A wet lot can pass identity and fail the balance. ## The isomer ratio on the chromatogram Beta-alanine and L-alanine are constitutional isomers with the same formula and the same molecular weight of 89.09. A titration of the amino group, a nitrogen figure or a weigh-out sees them as one material. An assay of 99% by a non-selective method is compatible with beta-alanine, with L-alanine and with a mixture of the two. The number to request is the ratio of the beta-alanine peak to any L-alanine peak, with the resolution and the limit of quantification. A method without an L-alanine standard has not shown that it can find the substitution. The practical proof is a spiking experiment: add a known amount of L-alanine to a sample and show two resolved peaks at the expected retention times. A chiral column is not the answer here. The two molecules are different constitutions, not mirror images, so the separation depends on the stationary phase, the mobile phase and the gradient, not on chirality. The certificate should report the area of each peak, not a single total. Optical rotation is a screening flag rather than an identity test. A zero reading fits beta-alanine and DL-alanine; a low reading can also come from a diluted or partly racemised L-alanine. A nonzero reading rules out pure beta-alanine and points to a chiral impurity, such as L-alanine (+14.0° to +15.0°) or carnosine (+20.0° to +22.0°). The absence of a rotation line is expected for this material, not a gap in the data. ## Diffraction and the solid An X-ray diffraction pattern is a fingerprint of the crystal lattice. Beta-alanine and L-alanine do not build the same lattice, so the patterns differ even though the molecules have the same mass. That makes diffraction useful when a supplier change or a strange powder raises a question that the certificate does not answer. It is not a routine release test and it does not quantify an impurity. A mixture of two crystalline phases may show a superposition of patterns, while an amorphous diluent or a thin coating may be invisible. Ask for the reference pattern and the detection limit before accepting a “matches” line, and use the result as supporting evidence. The strongest uses are narrow: a new source with an unfamiliar crystal habit, a disputed lot where IR and HPLC already agree, or a granulated grade whose solid state has changed. For routine release, IR and HPLC do the work. ## How a substitution hides Beta-alanine substitutions and the evidence that exposes them | Substitution | Why it can pass a quick check | What exposes it | L-alanine | Same formula, same mass, white powder | IR and retention differ; the rotation is nonzero | DL-alanine | Zero rotation looks like an achiral material | IR, retention and NMR differ from the beta isomer | Glycine | White, freely soluble, easy to confuse in a blend | Different formula, retention and assay | Maltodextrin or another diluent | Appearance and flow remain acceptable | Assay low; loss on drying and IR move | Water | Not a deliberate adulterant | Loss on drying high; dried-basis assay normal | Carnosine | Contains a beta-alanine residue | Higher nitrogen, a rotation and an extra peak Appearance and taste are poor evidence. A white, freely soluble powder with a mild taste could be beta-alanine, glycine or another amino acid. The reliable signals are the IR spectrum, the retention with the L-alanine ratio, and the mass balance. A certificate that lists appearance and assay but no identity evidence has left the most likely substitution untested. ## Writing identity into the specification - “Beta-alanine, CAS 107-95-9, 3-aminopropanoic acid, C3H7NO2.” - “Identification by IR against a reference and by HPLC retention; state the resolution against L-alanine.” - “Assay 99.0–101.0% by HPLC; name the basis and the detection mode.” - “Related substances: L-alanine at an agreed limit, with the method and the limit of quantification.” - “Loss on drying ≤0.5%; pH 5.0–7.0 in a 1% solution.” - “Achiral; no specific rotation is specified.” That last line is part of the identity, not an omission. A specification that asks for a rotation, or a certificate that reports one, is describing a different material or repeating a template. The name, the CAS number and the isomer limit belong beside the assay percentage. The L-alanine limit is an agreed addition, because the catalogue panel does not list a related-substances test. ## Questions that produce an identity file - What name and CAS number appear on the certificate, and does the label use the same name? - Can you supply the IR spectrum and the HPLC chromatogram, including the L-alanine standard and the resolution? - What is the L-alanine result for this lot, and what limit of quantification applies to that peak? - How much moisture does the lot carry, and which basis was used for the assay? - Will you accept a joint re-test on the retained sample if the identity is disputed? Five answers of this kind make a file that can be audited. One assay percentage does not. The beta-alanine page carries the catalogue values; the COA page shows where the identity lines sit; the grades page covers the powder; the L-alanine identity page gives the other side of the isomer question; the carnosine page covers the dipeptide; the methods library describes the chromatography; the quality page covers the release file. ### 01 What the COA for L-glutamic acid actually contains URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-glutamic-acid/coa/ Reviewed: 2026-11-19 Three questions decide an L-glutamic acid certificate: how much of the amino acid the lot contains, whether that amino acid is the L enantiomer, and how the powder behaves when it is weighed. The report answers them with an HPLC assay, a specific rotation on the dried basis, a loss on drying and a pH reading. Those lines sit among identification, particle size, heavy metals and microbiology. The figures below are the catalog limits; a lot is released only when its own COA reports results against them. In one lineThree numbers carry the lot: the assay for quantity, the rotation for the L form, and the loss on drying for the basis the assay is reported on. ## The certificate as a test report A useful certificate can be checked without calling the supplier. Each line should show what was tested, how, and against which limit. “Conforms” is a conclusion, and a conclusion without the method behind it is hard to audit. Identity, assay, chirality and moisture · L-glutamic acid | Parameter | Method | Catalog limit | Appearance | Visual | White crystalline powder | Identification | IR and HPLC | Conforms to the reference | Assay | HPLC | 98.5–101.5% | Specific rotation | Polarimetry, dried basis | +31.0° to +32.5° | Loss on drying | Gravimetric | ≤0.5% | pH (1% preparation) | Potentiometry | 3.0–4.0 Physical, contaminant and microbiological limits | Parameter | Method | Catalog limit | Particle size | Sieve analysis | ≥95% through 40 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent The pH row deserves a note. A 1% preparation is 10 g/L, while only about 8.6 g/L of L-glutamic acid dissolves at 25 °C. Unless the preparation is warmed, the reading comes from a saturated solution with solid still present. The method should say how the sample was prepared and at what temperature it was read. ## The assay basis, the detector and the rotation conditions An assay percentage needs a denominator. Reported “as is”, it includes the water the powder carries; reported “dried”, that water has been divided out. With loss on drying ≤0.5% the gap is small but real: 99.0% as-is on a lot with 0.4% water is about 99.4% on the dried basis. The certificate should print the basis in the assay row rather than leave it to a footnote. Glutamic acid does not absorb usefully in the ultraviolet, so the HPLC method has to make the molecule visible. Common approaches are pre-column derivatisation, ion-exchange separation with post-column ninhydrin, or an evaporative light-scattering or charged-aerosol detector. “HPLC” on its own describes none of these; the detector, the standard and the sample preparation belong in the method. The HPLC method note explains the separation. Rotation is measured on the dried basis, in 6 M hydrochloric acid by convention. The angle depends on the solvent, the concentration, the cell path and the temperature, so those details belong beside the result. A reading close to zero is not a weak batch of the L form; it indicates that the D form is present. ## Release limit versus batch result The catalog limit is the gate; the lot result is the evidence. They should sit in different columns, with the method beside them. What the result column should contain | Parameter | Catalog limit | Result column | Assay | 98.5–101.5% | A measured percentage, with basis and detector | Specific rotation | +31.0° to +32.5° dried basis | A measured angle, with solvent, concentration and temperature | Loss on drying | ≤0.5% | A measured percentage | pH | 3.0–4.0 | A measured value and the preparation used | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot Some gates are tighter in practice than their number suggests. A rotation at the bottom of the window leaves little room for method variation. A loss on drying at 0.5% leaves no margin for a humid filling room. An assay above 101.5% is worth a check of the standard and the integration before it is accepted as a high-potency lot. ## What moves between batches Water and finishing account for most lot-to-lot movement. Drying changes the loss on drying; milling changes the mesh; the crystallisation step changes colour and habit. None of these is a change in the molecule, but each changes the certificate. The rotation is the line to watch. If it drifts down across lots while the assay holds, the explanation is more likely a growing D fraction, a blended racemate or a change in the polarimetry conditions than a purity problem. Ask for the raw angle and the conditions, then confirm with chiral HPLC. The lot code ties the document to the pack. It should appear on the certificate, on the pouch or drum, and on the retained sample. ## When to order an outside test An outside test is worth ordering when the source is new, the destination is regulated, the rotation is disputed, or the supplier's certificate does not address the D form. A focused panel is polarimetry with its conditions, chiral HPLC, IR against a reference, an HPLC assay with a named detector, loss on drying, ICP-MS and microbiology. Add XRD when the solid form or a blend is at issue, and a nitrogen determination when a nitrogen-rich diluent is suspected. The report should state the detection limit for each screen; “not detected” without a limit says more about the method than about the sample. Keep the tested sample as the retained sample and record the lot code. The analytical methods index lists what each panel can show. ## What to compare between suppliers Compare suppliers on six lines: the enantiomer and CAS number, the assay with its basis and detector, the rotation with its conditions, the loss on drying, the pH with its preparation, and the contaminant and mesh results. Two lots that match on assay but differ on rotation are not the same material. Then check traceability: who made the lot, which specification revision was used, and whether the lot code on the paper matches the pack. The catalog specification is on the L-glutamic acid product page; the form comparison is on the grades page; the tests that separate L from DL are on the identity page; the release workflow is on the quality page. ### 02 L-Glutamic acid grades: the free acid, the mesh and the salts URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-glutamic-acid/grades/ Reviewed: 2026-11-19 The catalog material is the free acid, a white crystalline powder milled to 40 mesh. A granulated version of the same acid is the other grade inside this catalog; monosodium glutamate and DL-glutamic acid are separate products that are often discussed with it. The free acid carries both acid protons, the salt carries one sodium, and the racemate carries equal parts L and D. Each change moves the label, the mass or both. In one lineThe free acid is the ingredient; granulation only changes how it flows, and every glutamate salt is a different product with a different label. ## Why the form comes before the mesh The choice starts with the molecule, not the sieve. Glutamic acid has two carboxyl groups and one amino group. In the free acid both carboxyls are protonated. Replacing one proton with sodium gives monosodium glutamate; replacing both gives a different salt again. A salt is not a stronger or weaker version of the acid, it is another ingredient with its own CAS number and declaration. Chirality is the second decision. L-Glutamic acid rotates plane-polarised light; the D form rotates it the other way; an equal mix reads near zero. DL-Glutamic acid is that mix, and it cannot be released against an L specification. The assay will not reveal the difference, because it counts total glutamic acid. L-Aspartic acid is the nearest relative and still a different product. The two acids differ by one methylene group, and the comparison belongs on a separate page rather than in a grade note. ## The materials sold around L-glutamic acid Grades and adjacent products sold under a similar name | Material | Identity | Glutamic acid per gram | What the label says | Where it fits | L-Glutamic acid, 40 mesh (catalog) | Free acid, crystalline powder | 1.00 g | L-Glutamic acid | Capsules, tablets, dry blends | L-Glutamic acid, granulated | Same acid, larger particles | 1.00 g | L-Glutamic acid | High-speed presses, dust control | Monosodium L-glutamate, anhydrous | Sodium salt, one sodium per molecule | About 0.87 g, plus about 136 mg sodium | Monosodium L-glutamate | Soluble salt for food matrices | Monosodium L-glutamate monohydrate | Sodium salt with one water | About 0.79 g, plus about 123 mg sodium | Monosodium L-glutamate | Same salt, different mass | DL-Glutamic acid | 1:1 mixture of L and D | About 0.50 g of the L form | DL-Glutamic acid | Not a substitute where L is named Only the first two rows are variations of this catalog item. The salt rows are different materials and the DL row is a different specification; each brings its own paperwork, and a purchase order should say which one it means. ## Solubility, pH and the powder Solubility is modest: about 8.6 g/L at 25 °C, with a minimum near the isoelectric point at pH 3.22. A 1% slurry is therefore not a true solution at room temperature, which is why the pH specification describes a saturated preparation. Moving the pH up or down increases solubility, but it also changes the species in solution and must be declared if a salt is formed. Granulation changes bulk flow, dust and the rate at which the powder wets out. It does not change solubility or assay. The catalog's 40 mesh cut suits capsules, tablets and dry blends; a granulated grade is specified on its own size range and density. Monosodium glutamate, by contrast, dissolves freely, so a formulator reaches for it when a clear solution is required, and accepts the sodium that comes with it. The free acid also tastes sour, while the salt tastes savoury at the same glutamate concentration. That difference belongs to the form and the pH; it is a sensory property, not a release test, and this page makes no flavour or functional claim. ## What the form does to the label arithmetic The free acid has no counter-ion, so a milligram of acid is a milligram of glutamic acid before the assay correction. The anhydrous salt is about 87.0% glutamic acid and 13.6% sodium; the monohydrate is about 78.6% acid and 12.3% sodium. The label arithmetic follows those fractions. Glutamic acid declared and the mass that carries it | Glutamic acid declared | Free acid mass | Anhydrous MSG mass | Sodium from the salt | 250 mg | 250 mg | About 287 mg | About 39 mg | 500 mg | 500 mg | About 575 mg | About 78 mg | 1,000 mg | 1,000 mg | About 1,149 mg | About 156 mg For the monohydrate, 500 mg of acid is about 636 mg of powder, still carrying about 78 mg of sodium. The racemate doubles the mass again: 500 mg of L-glutamic acid needs about 1,000 mg of DL. A capsule sized on the acid will not hold the same dose from a salt without a change to the fill. ## Writing the grade into the specification - “Name the acid and the enantiomer: L-glutamic acid, CAS 56-86-0, C5H9NO4.” - “Set the assay at 98.5–101.5% by HPLC and state the detector, the standard and the basis.” - “Require a specific rotation of +31.0° to +32.5° on the dried basis, with solvent, concentration and temperature.” - “Cap D-glutamic acid by chiral HPLC; a rotation alone is a screen, not a limit.” - “Fix loss on drying at ≤0.5% and pH at 3.0–4.0 for the stated 1% preparation.” - “Specify ≥95% through 40 mesh, or the granulated range and density if that grade is bought.” - “Keep the heavy-metal and microbiology panel, and state that no diluent is added.” If the form is left out of the first line, the specification cannot be enforced at goods-in. “Glutamic acid” does not distinguish L from DL, acid from salt, or powder from granule. ## When another form is the better fit A salt is the better choice when the label names sodium glutamate, when the formula needs a clear solution at a high dose, or when the sodium load is acceptable and declared. The free acid is the better choice for a dry blend, a capsule or a tablet where no sodium is wanted and the acid is the named ingredient. The racemate is never a substitute where the L form is named. If a supplier offers DL-glutamic acid against an L specification, the certificate cannot close the gap, whatever the assay says. If a beverage needs a pH adjustment to dissolve the acid, that is a formulation change with a labelling consequence, not a grade switch. The product hub lists the catalog figures; the acid versus monosodium glutamate page takes the sodium and label question further; the COA page shows the release tests; the identity page covers the L and D evidence. ### 02.1 L-Glutamic acid vs monosodium glutamate: the acid, the sodium and the label URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-glutamic-acid/grades/l-glutamic-acid-vs-msg/ Reviewed: 2026-11-19 L-Glutamic acid and monosodium glutamate are the free acid and its monosodium salt. The acid is CAS 56-86-0, C5H9NO4, 147.13 g/mol, with no sodium; the salt is CAS 142-47-2, C5H8NNaO4, 169.11 g/mol, and about 13.6% of its mass is sodium. The two are different label ingredients, and the salt supplies roughly 87% of its mass as glutamic acid. In one lineMonosodium glutamate is the sodium salt of glutamic acid: the sodium figure, the taste and the label name change, and the free acid is not a drop-in for it. ## The acid, the salt and the water of crystallisation Glutamic acid carries two carboxyl groups. In the free acid, both acid protons are present. In monosodium glutamate, one of those protons is replaced by a sodium ion, so the molecule is a sodium salt rather than the free acid. One proton is the whole difference on paper, and it separates the two materials into different CAS numbers and different specifications. The salt is sold in two solid forms. The anhydrous salt, CAS 142-47-2, has a molecular weight of 169.11. The monohydrate, CAS 6106-04-3, carries one water of crystallisation and weighs 187.13 g/mol. A certificate that gives an assay and a sodium figure without naming the hydrate has left the reader to work out which powder is in the drum. The free acid is the material this catalog supplies. It is a white crystalline powder with a 40 mesh finishing specification, and it is the ingredient named “L-glutamic acid” on a panel. The salt is bought against a different specification and declared under a different name. ## The numbers side by side L-Glutamic acid, monosodium glutamate anhydrous and the monohydrate | Property | Free acid | MSG anhydrous | MSG monohydrate | CAS number | 56-86-0 | 142-47-2 | 6106-04-3 | Formula | C5H9NO4 | C5H8NNaO4 | C5H8NNaO4·H2O | Molecular weight | 147.13 | 169.11 | 187.13 | Glutamic acid per gram | 1.00 g | About 0.87 g | About 0.79 g | Sodium per gram | None | About 136 mg | About 123 mg | Water solubility | About 8.6 g/L at 25 °C | Freely soluble | Freely soluble | Label name | L-Glutamic acid | Monosodium L-glutamate | Monosodium L-glutamate The table is about composition, not about interchangeability. The free acid and the salt have different pH in solution, different solubility and different masses per gram of glutamic acid. A substitution across that line is a new ingredient, not a new supplier. ## What the sodium does to the arithmetic A formula that declares 500 mg of glutamic acid needs about 575 mg of the anhydrous salt, or about 636 mg of the monohydrate. Either mass brings about 78 mg of sodium, because the sodium and the glutamate travel together in a fixed ratio. The salt weight is not the glutamic acid weight, and the sodium is not a contaminant; it is part of the ingredient and has to be declared. On an EU label, the salt equivalent is calculated as sodium multiplied by 2.5. About 78 mg of sodium is therefore about 195 mg of salt equivalent, before any other sodium in the product. On a US label, the sodium appears in the Nutrition Facts panel. A switch from the free acid to the salt changes both the ingredient declaration and the sodium calculation, and the second change is easy to miss when the glutamic acid dose is held constant. The salt is also freely soluble, while the free acid dissolves to only about 8.6 g/L at 25 °C. A clear drink at a high glutamate dose may need the salt for solubility alone; that is a formulation reason, not a reason to describe the two as the same material. ## Taste is a difference, not a release test At the same glutamate concentration, the free acid reads sour and the salt reads savoury. That is a property of the form and the pH, and it is one of the reasons a formulator cannot swap one for the other without tasting the result. Other amino acids taste different again: glycine reads sweet, which is why a taste panel is not an identity test. Taste is not on the certificate and is not a specification line. This page describes it only because it differs between the two forms; it makes no flavour or functional claim, and no disease-related claim. The release tests are the assay, the rotation, the moisture and the contaminant panel, not a sensory impression. ## What the label has to say “L-Glutamic acid” and “monosodium L-glutamate” are different declarations. The first names the acid; the second names the salt, and the salt brings sodium with it. A formula that changes form needs a new ingredient declaration, a new sodium figure and a fresh check of the destination file. A specification check does not substitute for that review. In the European Union the additive entries are separate: glutamic acid is E620 and monosodium glutamate is E621 in the list under Regulation (EC) No 1333/2008. Those entries govern an additive use, not a supplement ingredient use, and the buyer's regulatory team confirms which route applies; check the current text. In the United States the ingredient is declared by its common name, and the sodium appears in the Nutrition Facts panel. The certificate is not an authorisation in either market. ## When to choose which Choose the free acid when the label names the acid, when the formula is a dry blend or a capsule, and when no sodium is wanted from this ingredient. Choose the salt when the label names monosodium glutamate, when a clear solution at a high glutamate dose is needed, or when the sodium is acceptable and declared. The choice belongs to the formula and the label, not to the assay. Whichever way the project goes, write the form, the CAS number and the hydrate into the specification, and put the change under written change control. A supplier can supply the free acid against this catalog; the salt is a different purchase with a different mass and a different regulatory file. The L-glutamic acid hub lists the catalog figures; the grades page sets the acid beside the granulated grade and the racemate; the L-aspartic acid page covers the other acidic amino acid; the quality page describes how a lot is released. ### 03 L-Glutamic acid: dry stability, heat and the solution URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-glutamic-acid/stability/ Reviewed: 2026-11-19 L-Glutamic acid stores well as a dry crystalline solid. The stability work is less about the intact crystal and more about what moisture, heat and pH can do once the powder is opened or dissolved. In a dry blend, moisture enables browning with reducing sugars; in solution, heat and pH can cyclise the acid to pyroglutamic acid or racemise part of it. The retest period is set from data for the actual pack. In one lineL-Glutamic acid is a stable crystalline solid when it stays dry; moisture, heat and pH are what move it towards racemisation or pyroglutamic acid. ## The powder: moisture, caking and browning The catalog's ≤0.5% loss on drying is a release limit, not a licence to store the powder in humid air. An opened pouch exchanges water with the room; the as-is assay falls, the powder can cake, and the conditions for browning improve. The dry solid is not fragile, but the certificate describes the powder at release, not after a month on a bench. Browning is the reaction to watch in a blend. The amino group of glutamic acid reacts with reducing sugars when water and heat are present, and a warm warehouse supplies both. A blend containing glucose, lactose or a reducing-end maltodextrin is more exposed than a pure amino acid powder. The practical controls are a tight pack, a dry store and a check of water activity in the finished blend. Light is a minor factor for this material. The crystal is not a photolabile dye, so an opaque pack is a sensible default rather than a critical control. ## The solution: heat and pH decide In water the acid sits near its isoelectric point, pH 3.22, where solubility is at its lowest. A 1% preparation is already above saturation at room temperature. Warming the water or moving the pH away from the isoelectric point dissolves more, but the change in pH also changes what is in solution. Heat is the main risk. In acidic solution, prolonged heating can convert part of the glutamic acid to pyroglutamic acid (5-oxoproline) by cyclisation. In alkaline solution, heat drives racemisation towards the D form. A hot-fill beverage or a long hold at temperature exposes the ingredient to one or both risks, depending on the matrix pH. The finished product has to be tested, not inferred from the bulk powder. ## What drives degradation Conditions that change L-glutamic acid during storage | Factor | What it does | Control | Moisture | Raises loss on drying; caking; enables browning | Sealed pack; dry store; reseal after opening | Heat | Accelerates cyclisation and racemisation in solution | Cool process; validate the hold time | Acidic pH | Cyclisation to pyroglutamic acid on prolonged heat | Limit the heat load; test the finished product | Alkaline pH | Racemisation towards the D form | Keep the matrix pH in the validated range | Reducing sugars | Maillard browning in a moist, warm blend | Control water activity; choose excipients | Light | Minor for the solid; not the primary driver | Opaque or closed pack is sufficient These factors interact. A warm, humid blend with a reducing sugar is worse than either condition alone, and a hot alkaline hold pushes the racemisation route. The useful stability question is not whether glutamic acid is stable in general, but how long it stays within specification in a named pack and a named matrix. ## A stability protocol for the ingredient The study design should state which pack is tested, at which condition, for which time points and with which tests. A typical design uses 25 °C/60% relative humidity for long-term storage, 30 °C/65% for intermediate storage and 40 °C/75% for accelerated storage. A photostability arm is optional for this solid but useful for a transparent pack. At each point, test assay, rotation or chiral HPLC, loss on drying, pH, appearance and microbiology. Add a pyroglutamic acid limit for a product that is heated in solution. Report the individual results and identify the pack and the lot family; a summary that says only “stable” does not show a trend. The analytical methods index lists the panels that can show each change. Buy the data for the pack you will use. A 25 kg drum and a 1 kg pouch differ in headspace and in how often they are opened, so a result from one does not describe the other. ## The finished formula changes the answer In a capsule or tablet the water activity is low, but the shell and the excipients can still move moisture. Measure loss on drying at release and again after storage, and inspect the fill for colour. A direct-compression blend with a reducing sugar is the one to watch. In a beverage, pH, heat and time act together. Bulk stability is the starting point, not the answer, and an overage is a label decision that cannot fix a process holding the solution hot. The acid versus monosodium glutamate page explains why the salt is the more soluble starting point for a drink. ## How the shelf life is set No single shelf-life number is published for L-glutamic acid, because the pack and the storage condition define it. The retest period on the specification is the assigned value, and it is supported by the stability file for that pack. Without a pack, a condition and a test panel, a number is only a claim. When the retest period ends, test the retained sample again before extending the date. Extension should follow data, not assumption, and a bulk result should not be carried across to a repack. The product hub lists the standard packs; the COA page covers the release tests; the quality page describes the release workflow. ### 04 L-Glutamic acid: MOQ, packs and the order file URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-glutamic-acid/moq/ Reviewed: 2026-11-19 L-Glutamic acid is sold from a 1 kg foil pouch, with a 25 kg fiber drum for production. Standard orders ship in 1–7 days from confirmation. Before a quotation can be compared, six points need to be on it: the form and CAS number, the specification with its assay basis, the pack, the destination and Incoterm, the document set, and the market where the material will be used. In one lineOne kilogram is the minimum because a lot has to be sampled, tested and traced before it is scaled, and the pouch is the smallest unit that does all three. ## Why the minimum is 1 kg One kilogram is the practical floor for a qualification. It leaves enough material for a trial batch, a retained sample and an independent check of identity or rotation, and it ships as a parcel. A smaller amount would have to be split from a larger lot, which adds a handling step and a second container without changing the chemistry. The bulk unit is a 25 kg fiber drum. It lowers handling per kilogram but ties up inventory and storage time, so it suits a production plan rather than a first trial. The minimum is set by the pack and the traceability it carries, not by a volume target. Sampling follows the same logic. One pouch can be sampled, closed and retained as a single lot. A repack from a drum is a new unit and needs its own record if it is to support the same traceability claim. ## Packs and formats Standard L-glutamic acid packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Particle profile changes | Custom mesh | On request | Matching an existing blend | Specification line changes The catalog powder passes 95% through 40 mesh. A granulated or custom-mesh grade is a new specification line, not a packing variant, and it should be quoted before the order because it can change the lead time. ## Lead time and dispatch Allow 1–7 days from confirmation for the standard pack. Picking, document preparation and dispatch sit inside that window; transit, customs and the customer's own release sit outside it. A custom granulation or a non-standard pack adds time and should be quoted and scheduled separately. Ask for a dispatch date as well as a lead time. The Incoterm decides who books the freight and clears the entry, and the documents should move with the lot rather than follow it. ## What a quotation needs Six points make two quotations comparable: - Identity. L-Glutamic acid, free acid, CAS 56-86-0. - Specification. Assay and basis, rotation, loss on drying, pH preparation, mesh, heavy metals and microbiology. - Pack. 1 kg pouch, 25 kg drum, or a granulated or custom-mesh grade. - Delivery. Destination and Incoterm. - Documents. COA, specification and SDS, plus any statement the importer needs. - Use. Supplement, food or another application, and the market of sale. Without the form and the market, two quotations may describe two different offers. Commercial terms are not published here; they are stated on the quotation. ## The sample is a lot, not a demonstration The 1 kg pouch is the qualification sample. Check identity, assay, rotation, loss on drying, pH and microbiology before scaling, and retain material from the same pack. The lot code should match on the pouch, the COA and the quotation. An untraceable sample is a demonstration, not a qualification. If a smaller bench amount is needed, raise it before ordering. A split from a drum counts as a repack: it carries its own traceability, is not the catalog pack, and may come from a different lot than the production drum. ## Terms to settle before the first order The quotation sets the commercial terms, the Incoterm, the pack, the lead time and the paperwork. Quality conditions are negotiated alongside them: specification revision, COA per lot, retained sample, retest period and change control. Put a quality agreement in place before the first production order, not after a dispute. Returns and replacements are governed by the quotation and the quality agreement. If a lot misses the agreed specification, resolve it with the retained sample and a joint re-test rather than a photograph. Agree in advance who pays for the referee test and which laboratory both sides accept. The product hub carries the catalog specification; the COA page lists the release tests; the MOQ glossary entry defines the term; the quality page describes the release file. ### 05 The regulatory file for L-glutamic acid URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-glutamic-acid/compliance/ Reviewed: 2026-11-19 The material is L-glutamic acid, free acid, CAS 56-86-0. What travels with it is a specification, a lot certificate, a safety data sheet and a set of statements; what the buyer adds is the destination route. That route is not decided by the certificate. This page sets out the documents and the questions to close before the first order. In one lineThe drum has a specification; the market has a route, and the two are checked separately before the first order. ## What the file contains A regulatory file is assembled around a sale, not around a powder. It has to identify the material precisely, show which lot is being released, translate the limits to the finished dose, and record the label and the claim. The COA covers the lot, the technical data sheet covers the specification, and the SDS covers handling. None of the three decides whether the destination allows the use. The file also needs the statements a customer or a border officer will ask for: allergens, GMO status, origin, residual solvents, and a declaration that the material is the L enantiomer. Those documents should carry a version and a lot reference. A folder of undated PDFs is not a file. ## European Union In the European Union, three layers apply to almost any sale: general food law (Regulation (EC) No 178/2002), labelling (Regulation (EU) No 1169/2011) and contaminants (Regulation (EU) 2023/915, as amended). A food supplement adds Directive 2002/46/EC and the national rules that implement it. The current consolidated text, as of this review, is the reference, and the buyer's regulatory team confirms the route for the member state where the product will be sold. Glutamic acid is also named in the EU food-additive list: E620 for the acid and E621 for monosodium glutamate under Regulation (EC) No 1333/2008. Those entries set conditions for an additive use; they do not create a supplement ingredient route, and they do not cover a different salt or a different use. The additive and supplement routes have to be assessed separately. Great Britain and Northern Ireland are checked on separate tracks: GB against the GB register and GB labelling, Northern Ireland against the EU framework. The buyer confirms which applies and keeps the evidence with the order. ## United States In the United States, the starting point is the intended use. For a supplement, amino acids are within the statutory definition of a dietary ingredient in 21 U.S.C. 321(ff)(1); the product is labelled under the Supplement Facts rules at 21 CFR 101.36 and made under 21 CFR 111. For a food use, a different basis applies. Glutamic acid is also listed among the GRAS substances at 21 CFR 182.1045, but that listing does not decide the route for a finished supplement. The supplier should be able to state its basis and produce the document behind it. The buyer checks that the basis reaches the finished product and the claim, against the current text. The US regulatory note sets out the framework. ## Contaminants and limits Contaminant limits are set for the finished product, so a drum result has to be converted to the daily dose. The table is a starting point for a supplement file; the destination text and the dose decide the final figure. Contaminant limits to confirm for the finished product | Parameter | Typical supplement reference | What the file should show | Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method and the finished-product calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception that applies | Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result and method | Arsenic (As) | Customer or market limit | The agreed limit and the method, stated on the certificate The arithmetic is easy to skip. At 1,000 mg per day, a 3.0 mg/kg lead limit allows 3 µg of lead per day from this ingredient (3 mg/kg × 0.001 kg). That is only one contribution to the finished product's allowance; the excipients bring their own. The file should show the calculation beside the lot result. ## Label and claims “L-Glutamic acid” is the ingredient name; “glutamic acid” without the enantiomer is ambiguous, and a glutamate salt is a different declaration with a sodium figure. The label review and the claim review are separate. The brand's reviewer signs the wording off for that product, that form and that market. This material carries no disease-related claim, and a certificate does not approve one. A structure or function wording needs substantiation and the destination's own rules, signed off against the finished product. Changing the specification does not change the claim, and a claim does not change the specification. ## Documents for the file The pack of core documents is the specification with its revision number, the lot COA, the technical data sheet and the SDS. The supporting set includes allergen and GMO statements, the origin record, the residual-solvent statement, the enantiomer statement and the contaminant results. Add a packaging statement, and an irradiation declaration where the destination requires one. Each document should identify the product name, the form, the CAS number and a version or lot reference, so the quotation, the specification and the certificate line up. The COA page explains the lot document; the identity page covers the L and D evidence; the quality page describes the release file. ## Checklist before the first order - The specification revision, CAS 56-86-0 and the L form are written down. - The lot COA, TDS, SDS and the allergen, GMO, origin and residual-solvent statements are on file. - The rotation on the certificate supports the enantiomer statement. - Contaminant results are converted to the finished daily dose. - The label and the claim have been reviewed for the destination. - Source, process and pack are under change control. The product hub carries the catalog specification, and the EU regulatory note provides the framework references for the file. ### 06 How we prove an L-glutamic acid lot is the L form URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-glutamic-acid/identity/ Reviewed: 2026-11-19 An L-glutamic acid lot is identified by agreement between methods, not by one number. Infrared and HPLC establish the molecule, polarimetry and chiral HPLC establish the enantiomer, and the moisture, sodium and impurity figures show whether the powder is the free acid or something else. An assay of 99% is compatible with the L form, the D form and a racemate; the other lines decide which. In one lineIdentity is proved by agreement between methods: IR and HPLC name the molecule, polarimetry proves the L form, and chiral HPLC measures the D fraction. ## The five identity layers Each row below answers a different question. A supplier who has only the first row has described the label, not the material. Five layers of L-glutamic acid identity | Layer | Question | Test | What it establishes | Document | Is the form and enantiomer named? | Name, CAS number, formula | Paperwork only | Spectroscopy | Is the molecule glutamic acid? | Infrared against a reference | Functional groups, not chirality | Chromatography | Is the main peak the acid? | HPLC retention and peak purity | Identity and purity of the peak | Chirality | Is it the L form? | Polarimetry and chiral HPLC | The enantiomer and the D fraction | Mass balance | Is it a salt or a dilution? | Assay, loss on drying, sodium, residue | Consistency of the numbers ## The enantiomer ratio: proving the L form Specific rotation for L-glutamic acid is specified at +31.0° to +32.5° on the dried basis. The classical measurement is made in 6 M hydrochloric acid; the certificate should give the concentration, cell path and temperature as well, because each one shifts the angle. The D form rotates the other way, so a racemate lands near zero. Polarimetry is a screen; chiral HPLC is the measurement. The chromatogram resolves the D and L peaks and gives their ratio, which the specification should express as a ceiling on D-glutamic acid. DL-Glutamic acid, CAS 617-65-2, is the racemate that a rotation near zero points to. A blend built to pass the assay can still fail the ratio. Adding DL-glutamic acid to L-glutamic acid lowers the rotation and raises the D peak while the total glutamic acid figure remains inside the catalog range. The assay counts both enantiomers, so it cannot see the change. ## X-ray diffraction: the solid-state check X-ray diffraction examines the solid, not the solution. It shows whether the powder is crystalline and whether the pattern matches a reference, and it can distinguish one polymorph from another. L-Glutamic acid has α and β forms with different patterns, and the pattern can also expose an amorphous dilution. It does not measure the enantiomer ratio. The reference pattern and the detection limit should accompany any “match” statement. XRD is not a routine release test here; it earns its place when the question is solid form, crystallinity or a blend rather than assay. ## Substitutions and their signals Most substitutions are chosen because the assay will not notice them. The table pairs each one with the line that does. Common L-glutamic acid substitutions and the signals | Adulterant | What it does | Signal | Test | DL-Glutamic acid | Raises the D fraction | Rotation falls towards zero; D peak appears | Polarimetry, chiral HPLC | Monosodium glutamate | Adds sodium and raises the pH | Sodium present; ash or residue high | Sodium by ICP-OES, pH, residue on ignition | Pyroglutamic acid | Heat-formed cyclic impurity | Extra peak before the main peak | HPLC, impurity standard | Glycine or another amino acid | Dilutes the powder | Extra peak; assay and rotation shift | HPLC, IR comparison | Inorganic salt or moisture | Raises the mass without the analyte | Ash high; loss on drying high; assay low | Residue on ignition, loss on drying, mass balance Appearance is the weakest check. A white powder can be cut with another white powder and look unchanged, and a blend with glycine can be hard to see in the drum. The stronger checks are the rotation, the D fraction, the sodium figure and the mass balance. A certificate that reports only appearance and assay has not tested the most likely substitution. ## How to write the identity into the specification - “L-Glutamic acid, CAS 56-86-0, C5H9NO4; name the free acid and the L enantiomer.” - “Assay 98.5–101.5% by HPLC; state the detector, the standard and the basis.” - “IR and HPLC identification against a reference; keep the spectra with the lot.” - “Specific rotation +31.0° to +32.5° on the dried basis; state solvent, concentration and temperature.” - “D-Glutamic acid limit by chiral HPLC, written into the specification.” - “Loss on drying ≤0.5%; pH 3.0–4.0 on the stated 1% preparation.” - “No glutamate salt, pyroglutamic acid or other amino acid above the agreed limit.” ## Five questions for the supplier - Which form and enantiomer is the lot, and which CAS number is on the certificate? - Can you send the IR spectrum and the HPLC chromatogram, not just the assay result? - What rotation was measured, in which solvent, at which concentration and temperature? - What is the D-glutamic acid result by chiral HPLC, against which limit? - If the lot is disputed, will you re-test the retained sample jointly? Five specific answers amount to an identity file. An assay percentage alone does not. The product hub holds the catalog specification; the COA page shows where each figure sits on the certificate; the grades page compares the free acid with the salts and the racemate; the acid versus monosodium glutamate page covers the sodium signal; the FTIR note explains the spectrum; the quality page describes the release workflow. ### 01 What the COA for L-ornithine actually contains URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-ornithine/coa/ Reviewed: 2026-11-19 An L-ornithine lot certificate has to do more than quote a percentage. It should name the form, report the HPLC assay against a stated basis, give the specific rotation with its conditions, and show the pH of a 1% solution; those four lines decide whether the powder is the free base the catalog describes. The batch result then sits beside each release limit, not in place of it. In one lineThe assay says how much ornithine the powder carries; the rotation and the pH say it is the L free base, and the form has to be named before either figure means anything. ## The certificate as a table of evidence Each parameter needs a test, a method and a release limit. A row that reads only “conforms” gives the reader a conclusion without the measurement behind it. The table below is the catalog panel; the batch certificate adds the measured result for the lot. Release panel · L-ornithine free base | Test item | Procedure | Acceptance limit | Appearance | Visual | White crystalline powder | Identification | IR plus HPLC retention | Matches the reference | Assay (basis stated) | HPLC | 98.5–101.5% | Specific rotation | Polarimetry, dried basis | +22.0° to +24.0° | Loss on drying | Gravimetric | ≤0.5% | pH (1% solution) | Potentiometry | 9.0–11.0 | Heavy metals | ICP-MS, each element | Pb ≤3, As ≤2, Cd ≤1, Hg ≤0.1 mg/kg | Microbiology | Plate count, absence tests | Total plate count ≤1,000 cfu/g; yeast/mould ≤100 cfu/g; E. coli, Salmonella: absence confirmed | Particle size | Sieve analysis | ≥95% through 40 mesh Identification and rotation answer the identity question; the assay answers quantity; loss on drying supplies the denominator; pH distinguishes the base from the salt. The remaining lines describe what else is present. ## Dried basis, entity and the form An assay is only a number once its basis is fixed. If a lot reads 98.6% as received and loses 0.4% on drying, the dried-basis figure is 99.0%. Both percentages can be correct, but they describe different powders. The basis should be printed in the assay row, not buried in a note. The second half of the basis is the entity. On the free base, the assay is the ornithine content. A hydrochloride lot calculated as ornithine would land near 78%, because the salt is only about 78.4% ornithine by mass. If the laboratory calculates the salt as the salt, the same material can read near 100%. The certificate has to say which convention it used. The rotation and the pH close the loop. Specific rotation depends on solvent, concentration and temperature, so a figure without those conditions cannot be reproduced. The 1% pH window of 9.0–11.0 is consistent with the free base; a hydrochloride solution sits well below it. A lot that passes the assay but fails the pH is not the catalog form, even if the percentage looks right. ## Release limit and measured result The limit is the acceptance boundary; the result is the measurement. Both belong on the page, with the method named. A result column filled with the specification range is not evidence that the lot was tested. What the result column should show | Test | Acceptance boundary | What the result should be | Assay | 98.5–101.5%, basis stated | A measured figure, with the entity and basis stated | Specific rotation | +22.0° to +24.0° dried basis | The measured figure and the conditions | Loss on drying | ≤0.5% | A measured percentage | pH (1% solution) | 9.0–11.0 | The measured pH at the stated strength | Heavy metals | Per element | A separate mg/kg figure for each metal | Microbiology | Counts plus absence | The plate count and an absence result for the lot A total heavy-metal figure hides which element is present. A microbiology statement needs a count and an absence result. An identity statement needs the spectrum or the retention, not a tick. ## What can differ from lot to lot Fermentation and crystallisation shift colour and residual water; drying shifts the loss on drying; milling and sieving shift the particle-size result. Those movements are normal and do not by themselves mean an identity problem, as long as the rotation and the pH remain in their windows. Rotation behaves differently from the other lines. It is controlled by the enantiomeric composition, so a normal lot repeats its value within a narrow band; an outlier points to a D-enriched or racemic source rather than to process drift. A low assay with a normal rotation points instead to moisture, a dilution or a calculation error. pH is the early indicator of exposure. An alkaline powder that has been open takes water and carbon dioxide, and the 1% solution falls within the 9.0–11.0 window before the assay moves much. A lot near the floor of the window deserves a look at the pack record. ## When an outside test is worth it Send a sample out for a new supplier, a first import into a regulated market, a disputed form or a rotation sitting at the edge of the window. The useful panel is targeted: HPLC for identity and assay, polarimetry for rotation, loss on drying, pH and ICP-MS for the metals, plus microbiology. Add chloride when the hydrochloride is possible, and chiral HPLC when the rotation suggests a mixed enantiomer. Ask each laboratory for its detection limit. A “not detected” result without a limit describes the method's sensitivity, not the sample. For a chiral check, ask for the enantiomeric ratio so the number can be compared with the certificate. Keep the chain of custody intact. The tested portion should come from the retained sample, and the report should identify the lot. If a result is contested, hand the referee the retention sample plus the certificate and specification, then request the discriminating tests instead of repeating the same assay. ## Comparing two suppliers Line up seven items: form and CAS; assay with its entity and basis; identity method; rotation with conditions; loss on drying; pH at a stated concentration; and mesh with the lot code. Two offers that agree on assay but disagree on entity or basis are not selling the same powder. The second layer is traceability. The certificate should name the producer, the process and the drying and milling steps, and the lot code should tie the pouch, the drum and the retention sample together. The catalog sheet is on the product hub; the identity tests are on the identity page; the free base and the salt are compared on the grades page; the HPLC method has its own method note; the quality page sets out the release workflow. ### 02 L-ornithine free base or hydrochloride: choosing a grade URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-ornithine/grades/ Reviewed: 2026-11-19 L-ornithine is sold as a free base or as a monohydrochloride, and the salt is not a diluted base. The base is 132.16 g/mol and is all ornithine; the hydrochloride is 168.62 g/mol, about 78.4% ornithine and about 21% chloride, and its solution is much less alkaline. The catalog material is the base at 40 mesh. Form and mesh are separate lines in the specification. In one lineThe hydrochloride carries about 78% ornithine and a chloride load, so the form changes the dose arithmetic and the label before it changes the assay. ## Two decisions under one name “L-ornithine” does not say which chemical form is in the drum. The base and the hydrochloride have their own CAS numbers, molecular weights, pH ranges and label names. A certificate written for one cannot be applied to the other, and a formula weighed for one will be over- or under-dosed if the other arrives. The second decision is physical. The catalog grade passes 40 mesh at ≥95%; a granulated grade is available on request. Mesh changes flow, dust and the way the powder disperses, but it does not change the molecule. Write the chemical form and the particle size as two separate requirements. ## Free base and hydrochloride L-ornithine free base against the monohydrochloride | Line | Free base | Hydrochloride | Label name | L-ornithine | L-ornithine hydrochloride | CAS number | 70-26-8 | 3184-13-2 | Formula and molecular weight | C5H12N2O2 · 132.16 | C5H13ClN2O2 · 168.62 | Ornithine per gram | 1.00 g | About 0.784 g | pH (1% solution) | 9.0–11.0 | Below the base; the salt's certificate states its range | Chloride | None from the counter-ion | About 21% by mass | Assay convention | 98.5–101.5% by HPLC; basis and entity stated | The salt's specification, calculated as the salt | Panel wording | L-ornithine | L-ornithine hydrochloride Neither row is a quality ranking. The form that fits the formula and the label is the correct one, and the other is a different purchase. ## Alkalinity, water and the chloride load The base is alkaline because it has two amino groups and no acid counter-ion. A 1% solution sits between pH 9.0 and 11.0. In a sealed stick with an acid, the base neutralises the acid; any carbonate the powder has picked up from the air can release carbon dioxide and swell the pack. Water is the other handling issue. The base is hygroscopic, and its alkaline surface can also take carbon dioxide from the air. The powder cakes, the pH falls and the mass gains something that is not ornithine. The hydrochloride removes most of that alkaline surface, but it is still hygroscopic and brings about 21% chloride; it is a different formulation decision, not a free pass on the pouch. Both forms dissolve readily in water, so solubility rarely decides the choice. The deciding factors are the pH the matrix can carry, the chloride the label can declare and the ingredient name the artwork already uses. ## The dose arithmetic Each gram of the hydrochloride supplies about 784 mg of ornithine. To declare 1,000 mg of ornithine from the salt, the formula needs about 1,276 mg of powder. A 500 mg capsule of the salt carries about 392 mg of ornithine, while the same fill of base carries about 500 mg. That gap changes the fill weight and the panel. A capsule designed around 500 mg of base cannot hit the same label figure with the salt unless the fill or the capsule count changes. A stick pack offers more volume, though the acid–base reaction weighs more heavily in a sealed pack; a tablet adds granulation pH to the question; a gummy adds water and heat. Decide the form before the purchase order. State the ornithine figure the label will declare and the fill weight the machine can run, then choose the salt or the base that meets both. ## What the specification should say - “L-ornithine free base only; CAS 70-26-8; C5H12N2O2. The hydrochloride is a separate purchase.” - “Assay by HPLC: 98.5–101.5%, with the basis and entity stated.” - “Specific rotation +22.0° to +24.0° on the dried basis, with solvent and concentration stated.” - “Loss on drying ≤0.5%; pH (1% solution) 9.0–11.0.” - “Particle size: at least 95% through 40 mesh, or the granulation agreed in writing.” - “Chloride: report the result on every lot where the formula is sensitive to salt.” - “Metal panel and micro counts as listed; lot code on the pack, certificate and retention sample.” For the hydrochloride, the name, CAS, molecular weight, assay convention, pH range and chloride line all change. A base specification with the noun swapped is not a salt specification. ## When the other form is the wrong choice Do not put the base into an acidic, sealed powder unless the formula can handle the gas it will release. Do not put the hydrochloride behind a label that says “L-ornithine” and declares an ornithine dose, unless the panel is rewritten for the salt. Nor should the form be changed to solve a flow problem; mesh and granulation address flow, while a salt swap creates a labelling problem. The catalog form is the free base at 40 mesh. The catalog sheet sits on the product hub; the COA page shows the reporting format; the ornithine versus arginine page covers the structural difference; the stability page covers moisture and gas; the compliance page covers the market names. ### 02.1 L-ornithine vs L-arginine: two urea-cycle amino acids URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-ornithine/grades/l-ornithine-vs-l-arginine/ Reviewed: 2026-11-19 L-ornithine and L-arginine are both basic amino acids of the urea cycle, but they are not interchangeable. Arginine is C6H14N4O2 (174.20 g/mol), carries a guanidino group and is the direct precursor of urea; ornithine is C5H12N2O2 (132.16 g/mol), carries a δ-amino group, is not proteinogenic, and is regenerated by the cycle. The difference changes the mass, the salt, the label and the quantity a formula needs. In one lineArginine carries the guanidino group and is cleaved to urea; ornithine carries the nitrogen back into the cycle, and the two are different label ingredients with different masses. ## One carbon and two nitrogens The formulas differ by CH2N2: arginine has one more carbon and two more nitrogens than ornithine. Those atoms sit in the side chain. Ornithine ends in a primary amino group; arginine ends in a guanidino group, which is the more strongly basic of the two and the part that arginase recognises. The second difference is the protein question. Arginine is one of the proteinogenic amino acids and is coded by the standard genetic code. Ornithine is not: it is made in the cell and used in the cycle, but it is not incorporated into proteins during translation. That is why a certificate for “ornithine” cannot be written from an arginine specification, even though the two molecules are neighbours in the same pathway. Both are alkaline and freely soluble, and both are sold as the free base and the hydrochloride; the similarity is why an identity file needs more than a pH reading. ## Where each one sits in the urea cycle The cyclic part begins when ornithine condenses with carbamoyl phosphate. Ornithine transcarbamylase joins the two into citrulline; argininosuccinate synthetase adds aspartate; argininosuccinate lyase releases arginine and fumarate; arginase cleaves arginine into urea and ornithine. The ornithine is regenerated, so it acts as a carrier rather than as a net input. That order matters for reading a label. Arginine is the molecule that becomes urea; ornithine is the molecule that is recycled to keep the cycle running. A formula that names one is not naming the other, and a blend that carries both has to declare both. The cycle is a description of nitrogen handling in the body, not a claim about what a supplement does. The regulatory page handles the claim question separately; the chemistry here is the reason the two ingredients are compared at all. ## The two amino acids side by side L-ornithine and L-arginine as ingredients | Property | L-ornithine | L-arginine | CAS number | 70-26-8 | 74-79-3 | Formula and molecular weight | C5H12N2O2 · 132.16 | C6H14N4O2 · 174.20 | Side chain | δ-amino group | Guanidino group | Proteinogenic | No | Yes | Catalog assay | 98.5–101.5% by HPLC | 98.5–101.5% by titration | Specific rotation | +22.0° to +24.0° | +26.3° to +27.7° | pH of the catalog solution | 9.0–11.0 (1% solution) | 10.5–12.0 (5% solution) | Common forms | Free base; hydrochloride | Free base; hydrochloride | Label name | L-ornithine | L-arginine The pH rows use different concentrations, so they are not a direct comparison of acidity; they are the conditions each catalog specification uses. The rotation windows are close but do not overlap, which is useful when a lot is disputed. ## Free base and hydrochloride, on both sides Each amino acid comes as a free base and as a monohydrochloride; the salt arithmetic differs because the molecular weights differ. L-ornithine hydrochloride is C5H13ClN2O2, 168.62 g/mol, and carries about 78.4% ornithine. L-arginine hydrochloride is 210.66 g/mol and carries about 82.7% arginine. The chloride load is about 21% for the ornithine salt and about 17% for the arginine salt. The label consequence is the same on both sides: a salt weight is not an amino-acid weight. A panel that says “L-ornithine hydrochloride 500 mg” declares about 392 mg of ornithine, while “L-ornithine 500 mg” needs about 638 mg of the salt. The same arithmetic applies to arginine with its own factor. The free base is the catalog form for ornithine. The hydrochloride is chosen when the formula cannot carry the alkalinity or when the chloride is acceptable; it is a different CAS number and label name, not a dilution. ## The conversion a formula needs For ornithine, a gram of the salt yields about 784 mg of ornithine, so a 1,000 mg ornithine label needs about 1,276 mg of the salt. The arginine salt yields about 827 mg per gram, so 1,000 mg of arginine needs about 1,209 mg. The multipliers are 1.28 and 1.21 respectively. These figures are arithmetic, not a dose recommendation. They decide the fill weight, the number of capsules and the panel figure. A combination product that declares both amino acids needs a separate line for each, with the form named for each line; a single “ornithine and arginine” figure does not tell the reader how much of either is present. If a formula is switched from one amino acid to the other at the same weight, the label figure and the alkalinity both change. The switch needs a new specification, a new panel and a new stability check, not a note in the batch record. ## What the label and the file have to say In the EU, the label names the amino acid and its form, and the amount is declared per portion. Annex XIII gives neither amino acid an NRV, so no percentage-of-NRV figure belongs on the panel. The claims register is a separate check: as of this review it carries no authorised health claim for L-ornithine, and the 2011 EFSA opinion on the urea-cycle claim found the relationship not established. The same review applies to the finished product, not only the ingredient. In the United States, the Supplement Facts panel declares each amino acid and its amount, with the form written out where the salt is used. A structure or function statement is possible with the DSHEA disclaimer; no disease-related claim is. The buyer's regulatory team confirms the route; a supplier certificate does not approve a claim or a label. ## When to choose which Choose ornithine when the formula and the label name L-ornithine; choose arginine when they name L-arginine. Do not position one as a substitute or a stronger version of the other: the masses differ, the side chains differ and the label names differ. The choice is a formulation and labelling decision, not a potency ranking. For a combination product, keep the two lines separate and name the form of each. For a single-ingredient product, match the certificate, the specification and the panel to the same molecule. The L-ornithine product page carries the catalog specification; the L-arginine page carries the comparison; the L-citrulline page completes the cycle; the grades page covers the salt forms; the methods library explains the assays and the quality page the release file. ### 03 L-ornithine: moisture, carbon dioxide and the packed shelf life URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-ornithine/stability/ Reviewed: 2026-11-19 The dry free base is the stable form, provided the pack stays closed. The powder is hygroscopic and alkaline, so water and carbon dioxide reach the surface first and move the pH before the assay shifts. Once dissolved, the same material meets heat, oxygen and any acidic partner. Shelf life belongs to the pack and the matrix, not to the certificate. In one lineThe free base is stable as a dry solid only while the pack keeps water and carbon dioxide out; the solution and the blend are where the specification moves first. ## The powder, water and carbon dioxide The catalog loss on drying is ≤0.5%. That figure is a release gate, and it also describes the material's behaviour: in a humid filling room the base takes water at the surface and then through the bulk. Caking is the visible sign, but a falling pH is the earlier one. Carbon dioxide follows water. An alkaline amino acid can hold CO2 at its surface, and the change adds mass while reducing the alkalinity the specification calls for. The 1% solution window of 9.0–11.0 is therefore a storage indicator as well as a release line. A lot near the bottom of the window after storage has probably been exposed, even if the dried-basis assay still reads inside its range. The pack does the barrier work: the 1 kg foil pouch and the 25 kg fiber drum depend on seal and liner; a folded-over pouch and a cut liner are openings. A desiccant helps only after the closure works, and it is not a substitute for one. ## The solution is the exposed format At 1% the solution sits at pH 9.0–11.0. Left open, it takes carbon dioxide from the air and drifts downward; if the powder has already taken up CO2, an acidic ingredient can liberate it again into a sealed headspace. Both directions are the same chemistry, and both change the pH the formula was built around. Warm alkaline solutions are harsher than the powder. A reducing sugar adds a browning route, and oxygen adds another; a ready-to-drink product needs its own preservation and process validation. A powder stick avoids the liquid hold because the consumer adds water at the point of use, but the stick's own headspace still matters. If a liquid is unavoidable, make it fresh or validate the hold time. Measure pH at the start, after the heat step and at the end of the intended shelf life; the pH will move before the assay does. ## What drives the change Storage factors for L-ornithine free base | Factor | Effect | Control | Water | Surface pickup, caking, faster CO2 reaction | Sealed pack, dry filling room, LOD limit | Carbon dioxide | Lower pH, added mass, reduced alkalinity | Closed pack, short exposure, liner intact | Heat | Faster browning and degradation in solution | Validate process time and temperature in the matrix | Acid | Neutralisation and gas release in a sealed pack | Check blend pH and headspace; trial the pack | Reducing sugars and metals | Browning, especially with heat | Choose low-sugar carriers; control metal contact | Oxygen | Minor in the solid; relevant in a liquid | Sealed pack; low headspace in a liquid The first three rows act before the material reaches a formula, which is why the pack and the store are part of the specification. ## A protocol for the packed ingredient Run the study on the pack that will be sold. Use the 1 kg pouch and, if it applies, the 25 kg drum; add an open-pack arm to measure pickup in the filling room. The standard conditions are 25 °C/60% RH and an accelerated 40 °C/75% RH, with 30 °C/65% RH where the destination is hot and humid. Test at release, at three and six months and at the end of the proposed shelf life, with an extra point if a result moves. The panel should cover assay, loss on drying, pH of a 1% solution, specific rotation, appearance and microbiology. Colour should be judged against a retained reference, because “slightly darker” is not a measurement. Add a stressed sample of the real blend. A stick pack containing an acid and held at the process temperature will show swelling or a pH shift before the powder assay changes, and that result is more useful than a second assay on the same material. ## How the formula changes the answer A capsule or tablet keeps water activity low, yet the shell and the excipients are still able to transfer moisture, and an alkaline fill can affect granulation. Check loss on drying and appearance at release and after storage, not only the assay. A stick pack is a sealed reactor. If an acid is present, it neutralises the base and can liberate carbon dioxide from any carbonate held by the powder; the pack can swell and the drink pH can move. An effervescent design uses that reaction deliberately, but the headspace and the fill weight still need a trial. A gummy or chew adds water and heat, and often a reducing sugar, so browning becomes part of the stability question. Granulation can improve flow, but it adds a binder and a water step; ask whether the granulated grade has its own data rather than assuming the powder data applies. ## Shelf life and the early warnings An assigned shelf life for the intact pouch or drum has to come from data on that pack, liner and closure. The retest date is a conclusion from that study, not a default; without the study, a date on the pack is only a wish. Watch pH first, then loss on drying, lumps, an off-white powder turning cream or tan, or a pouch that has pulled tight or ballooned. Each warrants a retest and a look at how the pack was handled. Extending a shelf life because the assay still passes ignores the change that the formula notices first. Pack details sit on the product page; the COA page lists the release panel; the grades page compares the forms; order sizes are on the MOQ page. Moisture testing is explained in the loss-on-drying note, and the quality page covers release and retention. ### 04 L-Ornithine: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-ornithine/moq/ Reviewed: 2026-11-19 The smallest order is the 1 kg foil pouch; the 25 kg fiber drum is the bulk pack; standard lead time is 1–7 days. A quotation can only be firm when it names the form, free base or hydrochloride, the assay basis, the pack, the trade term, the paperwork and the country of sale. In one lineThe 1 kg pouch is the smallest unit that can carry a lot code, a retained sample and a rotation result; the 25 kg drum is the production pack. ## Why the floor is 1 kg A kilogram is enough to run a bench trial, hold a retention sample and send a portion to an outside laboratory, and it is small enough to travel by air without a pallet. It also carries a single lot code, which is the property that matters when a result is questioned later. Splitting a drum into smaller bags creates a new pack and a new chain of custody without improving the material. A drum cuts handling per kilogram while tying up inventory and extending storage. The minimum is a unit of traceability, not a sales threshold, and the drum is a production decision rather than a discount tier. ## Packs and formats L-ornithine packs for trial and production | Unit | Fill | What it suits | Points to note | Foil pouch | 1 kg | Trials, samples, short runs | Moisture barrier; reseal completely | Fiber drum | 25 kg | Production | Inner liner; lot code on the drum and the liner | Granulated powder | On request | Flow and dust control | Different particle profile and lead time The catalog powder passes 40 mesh at ≥95%. Granulation is a specification change, not a packing option: it moves the particle-size line, may add a binder and can add time to the order. The free base is hygroscopic, so the pouch and the drum liner are part of the quality case rather than disposable wrapping. ## Lead time and dispatch The quoted 1–7 days includes picking, paperwork and dispatch. Transit, customs clearance and the buyer's own quality release sit outside it. A custom granulation or a non-standard pack is quoted with its own timing, and the two numbers should not be blended into one promise. Request a dispatch date, not only a lead-time figure. Pallets suit drums and parcels suit pouches; the trade term sets who arranges the freight and who handles entry, and the paperwork should move with the goods rather than follow them. ## What a quotation needs A quotation should let two suppliers be compared without a follow-up email. Six details do that: - Material and form. L-ornithine free base, CAS 70-26-8, or a separate line for the hydrochloride. - Specification. Assay entity and basis, rotation, loss on drying, pH, mesh, the metal panel and micro counts. - How much and in what. Pouch, drum, or granulated grade. - Where it goes. Country, port or delivery address, plus the trade term. - Paperwork. Certificate, specification, safety data sheet and any destination-specific declaration. - Use and market. Supplement, food or other use, and the country of sale. An offer without the form or the market is incomplete: one destination can accept the powder that another destination's file excludes. Commercial terms belong on the quotation, not on this page. ## The sample carries a lot code The 1 kg pouch is also the qualification sample. Check identity, assay, rotation, loss on drying and pH before scaling, and keep a portion from that same pack. The lot code should connect sample, certificate and quotation; without that link, it is a demonstration, not a qualification. A smaller bench quantity is a repack from a larger lot. That is a legitimate request, but it needs its own record, and it does not promise that the production drum will come from the same lot. Say so before the order rather than after the trial. ## Terms to settle before the first order Put the quality terms beside the commercial ones: the specification revision, the COA for each lot, the retention sample, the retest period and the route for changes. Settle a quality agreement early, before the first production order rather than after a disputed result. The quotation and the agreement govern returns and replacements. When a lot falls outside the agreed specification, settle the question with the retention sample and a joint re-test, not with a photograph of the powder. Agree in advance which laboratory is acceptable to both sides and who pays for the referee test. The product page holds the catalog sheet, the COA page sets out release testing and the compliance page the market documents. For the vocabulary, see the MOQ glossary entry; shipping is covered on the logistics page and release and retention on the quality page. ### 05 The regulatory file for L-ornithine URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-ornithine/compliance/ Reviewed: 2026-11-19 L-ornithine sits outside the EU's harmonised vitamin and mineral lists, so a supplement that contains it depends on general food law plus whatever the destination member state requires for amino acids. The US route is the dietary-ingredient route; Great Britain keeps its own framework and Northern Ireland follows the EU. Whether the powder may be sold is only the first question: the contaminant ceiling, the label and the claim each need separate evidence. In one lineThe specification characterises the powder; the regulatory file has to connect it to a route, a ceiling and a label for the destination, and the buyer's team signs that route off. ## The file, not the certificate A supplier can hand over a certificate, a specification and a safety data sheet without ever answering the market question. The file has to connect those documents to an instrument, a destination and a finished-product dose. Instruments that decide an L-ornithine supplement file | Market | Instruments | What they decide | European Union | Directive 2002/46/EC; Regulations 178/2002, 2015/2283, 2023/915, 1169/2011 and 1924/2006 | Supplement status, novel-food history, contaminants, labelling and claims | United States | FD&C Act section 201(ff) as amended by DSHEA; 21 CFR 111, 101.36, 101.93 and 190.6 | Dietary-ingredient basis, cGMP, Supplement Facts and structure/function statements | United Kingdom | Retained food law, including the 2003 supplement rules and the 2014 food information rules | Sale and labelling in Great Britain; Northern Ireland uses the EU regime The certificate is a lot document, not an authorisation. The specification describes the material. The safety data sheet describes handling. None of the three speaks for the destination, and the buyer's regulatory team is the party that closes that gap. ## The European Union: an amino acid, not a listed vitamin Directive 2002/46/EC harmonises the vitamins and minerals that may be used in food supplements. Annexes I and II do not include ornithine, so the member state where the product is sold decides whether a maximum level, a notification or a form restriction applies. The same capsule can be routine in one country and need a filing in another. Novel food is a separate gate. Regulation (EU) 2015/2283 turns on documented use before 15 May 1997; the file needs the evidence behind that claim, not just the conclusion. The free base, CAS 70-26-8, and the hydrochloride, CAS 3184-13-2, are separate materials, so a document written for one does not cover the other. The label rules come from Regulation (EU) No 1169/2011 and the Directive's supplement particulars. Ornithine has no Nutrient Reference Value, so a percentage of an NRV has no basis. Contaminants fall under Regulation (EU) 2023/915. Great Britain applies the retained framework, while Northern Ireland remains inside the EU regime. ## The United States: the dietary-ingredient route Section 201(ff) of the FD&C Act allows an amino acid to be sold as a dietary ingredient. The lawful basis is either marketing before 15 October 1994 or a new dietary ingredient notification under 21 CFR 190.6. The supplier should name the basis it relies on; the buyer checks that the basis covers the finished product and the intended use. Identity testing of each component is the manufacturer's duty under 21 CFR 111. The Supplement Facts panel follows 21 CFR 101.36: it declares the amount per serving, and because ornithine has no Daily Value, no percentage appears beside it. A structure or function statement needs substantiation and the disclaimer in 21 CFR 101.93; it must stop short of a disease-related claim. The FDA does not clear a label before sale, so the substantiation file is the brand's defence, not the supplier's certificate. ## Contaminants: the drum figure and the finished dose The catalog limits are specification terms. Three of them sit exactly on an EU maximum, which leaves no room for analytical uncertainty. Catalog limits and the EU position for a food supplement | Element | Catalog limit | EU ceiling at this review | Lead (Pb) | ≤3 mg/kg | 3.0 mg/kg; the catalog exactly meets it | Cadmium (Cd) | ≤1 mg/kg | 1.0 mg/kg maximum; the catalog is at the ceiling | Mercury (Hg) | ≤0.1 mg/kg | 0.10 mg/kg maximum; the catalog is at the ceiling | Arsenic (As) | ≤2 mg/kg | No EU-wide supplement maximum; contractual only A compliant powder can still fail the finished product. The daily dose, the number of servings and the other ingredients all add to the exposure, so the calculation belongs in the file. In the US, as of this review, no federal lead ceiling applies to supplements; California's Proposition 65 works from the daily dose, using a 0.5 µg/day maximum allowable dose level and a 15 µg/day no-significant-risk level for lead. ## Claims, the panel and the form trap In the EU and the UK, Regulation (EC) No 1924/2006 governs health claims, and a wording must be in the register before it is used. As of this review the register has no authorised claim for L-ornithine; the 2011 EFSA opinion on the urea-cycle claim, ID 4270, concluded that the relationship was not established. The current register is the reference, not this summary. The US allows a structure or function statement with the DSHEA disclaimer, provided the brand holds substantiation. A compositional statement such as “L-ornithine 500 mg per capsule” is a different thing: it describes the product and has to match the certificate, but it does not authorise a health claim. The form is where labels fail. A panel that says “L-ornithine” but is filled with the hydrochloride overstates the ornithine by about 21.6% of the salt weight, because the salt is only about 78.4% ornithine. The grades page sets out the conversion. ## What the file must contain - A lot certificate with the method, the calculation entity and the basis beside each result; the lot code must match the pack. - The current specification, naming the free base or the hydrochloride and the mesh. - A safety data sheet, an allergen statement and a food-contact declaration for the pouch or liner. - A manufacturer and country-of-origin statement that names the actual production site. - EU novel-food evidence for the pre-1997 use, not a one-line conclusion. - A US statement of the dietary-ingredient basis, or the notification for a new form. - A stability summary, the shelf life in force, and any halal or kosher certificate. ## Review points before the first order - Name the destination, and for the EU the member state. - Confirm the label and specification both say free base, or both say hydrochloride. - Find the destination's level and notification rule; do not assume the EU position covers it. - Convert every contaminant limit to the finished daily dose and record the margin. - Check the declared quantity against the form and the assay basis. - Search the current claims register or review the US substantiation file. - Keep one version across the specification, the certificate and the artwork. The US page, the EU regulatory page and the UK page set out the frameworks. Release tests are on the COA page, identity evidence on the identity page and the catalog specification on the product page; the quality page describes the release file. ### 06 How we prove an L-ornithine lot is the L free base URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-ornithine/identity/ Reviewed: 2026-11-19 Four lines of evidence, not one, make an L-ornithine identity file: the document names the form and CAS number, HPLC retention identifies the amino acid, polarimetry fixes the L configuration, and pH plus chloride show whether the free base or the salt is in the drum. A single assay can be met by more than one of those materials. In one lineThe rotation proves the L form, the HPLC proves the amino acid, and the pH plus the chloride line show whether the hydrochloride has replaced the free base. ## The identity layers Identity is not a single test, and a certificate that answers only the first question has described the label rather than the powder. Each layer below needs its own evidence. What each L-ornithine identity test can show | Layer | Question | Test | What it proves | Document | Which form is named? | Name, CAS number, formula | Only the paperwork | Chromatography | Is the amino acid ornithine? | HPLC retention and IR spectrum | The molecule, not its handedness | Configuration | Is it the L form? | Specific rotation; chiral HPLC if disputed | The enantiomer | Counter-ion | Base or hydrochloride? | pH of a 1% solution; chloride | The form | Mass balance | Is it diluted? | Assay, loss on drying, related substances | Whether the numbers agree ## Polarimetry and the enantiomer ratio A polarimeter reports an angle. Dividing that angle by the concentration in grams per millilitre and by the path length in decimetres converts it to specific rotation. A 1% solution that reads +0.230° in a 10 cm cell therefore corresponds to +23.0°. The conversion is why the certificate must state the solvent, the concentration, the temperature and the wavelength. The catalog window is +22.0° to +24.0° on the dried basis. A pure L lot sits inside it, a racemic mixture reads near zero, and a D-enriched lot falls below the window. The window is a tolerance, not a purity limit: a small D fraction can hide inside it, and a blend can be adjusted to land within it. When enantiomeric purity matters, ask for chiral HPLC and the enantiomeric ratio, not only the angle. Read the rotation with the assay. A low assay and a normal rotation point to water or a diluent; a normal assay and an abnormal rotation point to the other enantiomer. A rotation quoted without conditions cannot be reproduced, so it is not evidence. ## Diffraction and the solid form X-ray diffraction sees how the molecules pack in the solid. It separates a crystalline powder from an amorphous one, and it can compare a lot with a reference pattern. The free base and the hydrochloride pack differently, so a pattern match also says something about the form. Diffraction does not measure purity and does not identify the counter-ion. Request the reference pattern and the method's detection limit before accepting a “match” statement. It is not a routine release test here; its value is in a dispute or in a solid-form question such as a hydrate, a different crystal habit or an amorphous carrier. A different polymorph does not change the label, but it can change flow, dissolution and capsule behaviour. That is a process question, not an identity failure, and it belongs in the specification only if the dosage form is sensitive to it. ## What substitution looks like Signals of common L-ornithine substitutions | Substitute | What changes | Signal | Test | DL- or D-ornithine | Optical purity falls | Rotation near zero or below the window | Polarimetry, chiral HPLC | L-arginine | Different mass and retention | Rotation above the window; extra peak | HPLC, polarimetry, pH | L-citrulline or L-lysine | Similar rotation or basicity | Retention differs; assay profile changes | HPLC, related substances | Hydrochloride | Lower pH; chloride present | pH below 9.0; chloride positive | pH, chloride, assay as ornithine | Glycine or maltodextrin | Dilution | Low assay; rotation pulled down; LOD moves | Assay, polarimetry, loss on drying | Moisture | Water, not ornithine | LOD high; dried-basis assay normal | Loss on drying Colour does not help here: the base and the salt are both white to off-white, and a dilution can match the shade. The useful signals are the angle, the pH, the chloride result and the chromatogram. ## What to write into the specification - “L-ornithine free base only; CAS 70-26-8; C5H12N2O2. The hydrochloride is a separate material.” - “Assay by HPLC: 98.5–101.5%, with the basis stated.” - “Identification by IR and HPLC retention; specific rotation +22.0° to +24.0° on the dried basis, with conditions.” - “Loss on drying ≤0.5%; pH (1% solution) 9.0–11.0.” - “Chloride reported where the form is to be confirmed analytically.” - “No D-ornithine or other amino acid above the stated limit; related substances by HPLC.” - “Mesh: at least 95% through 40 mesh; metal panel and micro counts as listed.” ## Five questions for the supplier - What form does this lot carry, and what CAS number is printed on its certificate? - Can you supply the IR spectrum and HPLC chromatogram, not just the assay figure? - Which specific rotation was measured, and with what solvent, concentration and temperature? - What pH and chloride result did this lot give? - If the lot is disputed, will you re-test the retention sample jointly? A file built from those five answers is an identity case; one assay figure is not. The catalog sheet is on the product hub; the COA page shows where each figure sits; the grades page compares the forms; the ornithine versus arginine page explains the structural difference; the HPLC note describes the separation and the quality page the release file. ### 01 What the COA for L-serine reports, and on what basis URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-serine/coa/ Reviewed: 2026-11-19 An L-serine certificate reports appearance, identification by infrared and HPLC, assay by HPLC, specific rotation, loss on drying, pH, the heavy-metal panel, microbiology and particle size. The assay and the rotation answer different questions: the assay measures how much serine is present, and the rotation shows that the material is the L enantiomer. Each line needs its method and its release limit, and the measured result belongs in its own column. In one lineThe assay says how much serine is in the lot, the rotation says it is the L form, and the basis and the method say what the percentage refers to. ## Reading the certificate line by line A certificate is a set of measurements, not a verdict. For each parameter the reader should see what was tested, how it was tested and the limit it was released against. Without those three parts, “conforms” is an assertion the reader cannot check. On this product the identity line names the molecule, the rotation line names the enantiomer and the assay line gives the amount. Identity, assay, rotation and release limits · L-serine | Parameter | Method | Release limit | Appearance | Visual | White crystalline powder | Identification | Infrared and HPLC retention | Conforms to the reference | Assay | HPLC | 98.5–101.5% (dried basis) | Specific rotation | Polarimetry at 589 nm, c=10 in 1 M HCl, dry basis | +14.0° to +16.0° | Loss on drying | Gravimetric | ≤0.5% | pH (1% solution) | Potentiometric | 5.0–7.0 | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh ## Dried basis, moisture and the rotation conditions The catalog assay is 98.5–101.5% by HPLC, and the certificate has to say what that percentage is measured against. On the dried basis the laboratory weighs the powder as received, measures the water and reports the result on the dry matter. At the ≤0.5% loss-on-drying limit the correction is small but not always negligible: 98.5% as-is with 0.5% moisture becomes 98.99% dried, while 98.5% dried with 0.5% moisture is 98.01% as-is. The basis therefore changes what the figure means, and it has to travel with the result. Specific rotation is the enantiomer check. The catalog range is +14.0° to +16.0° on the dry basis, measured at c=10 in 1 M HCl. A rotation is comparable only when the certificate gives the solvent, concentration, cell length, temperature and wavelength, because the reading is normalised by concentration and path length. The range tells the reader that the lot is in the L direction; it does not quantify a small D fraction. A racemate reads near zero, and a lot with more D enantiomer reads lower. HPLC provides the assay and part of the identity. Serine has no strong ultraviolet chromophore at the usual wavelengths, so the method has to name the detector and any derivatisation. The word “HPLC” on its own is not a method description that another laboratory can repeat. ## Release limit versus measured result A specification limit and a measured result are different pieces of information. The limit is the boundary the lot had to meet; the result is what the laboratory found. A certificate that prints the specification range in the result column has told the reader nothing about the lot. What the result column should contain | Parameter | Release limit | Result column | Assay | 98.5–101.5% dried | The measured value, with method and basis | Specific rotation | +14.0° to +16.0° dry | The angle, plus solvent, concentration and temperature | Loss on drying | ≤0.5% | The measured value | Heavy metals | Per element | A result for every element, in mg/kg | Microbiology | Counts and absence | The count and the absence result | Particle size | ≥95% through 40 mesh | The measured pass-through Read each result against its own limit and method. Microbiology needs a count and an absence statement, not a general pass; heavy metals need a number for each element, because a total can hide the one that is high. A conclusion is acceptable only when the numbers behind it are on the page. ## What changes from lot to lot Between lots, fermentation, ion exchange and crystallisation shift the assay, the colour and the trace impurities. The dryer changes the loss on drying. The mill and the sieve change the particle-size result, which is why the mesh can move without any change in the molecule. Watch the rotation over time. A reading that slides toward the bottom of the range may reflect a process change or a D fraction; one certificate cannot distinguish them. Ask for the lot trend and, where the question matters, a chiral HPLC result. A value inside the range is a release decision, not a full stereochemical record. The appearance line is qualitative. “White crystalline powder” spans several shades, and a slight change is not a failed identity. A grey or yellow cast may point to drying, holding or filtration while the assay still passes. The batch record is more useful than a colour judgment, and the lot code must match the pack, the drum and the retained sample. ## When an outside test earns its place An outside test is worth ordering for a new source, a first shipment into a regulated market, a stereochemical claim that the supplier's certificate does not establish, or a disputed lot. The panel should be chosen for the question, not copied from the certificate. For serine, that usually means infrared and HPLC for identity, chiral HPLC for D-serine, loss on drying, ICP-MS for the metals, microbiology, and LC-MS for the protonated ion at m/z 106.1. XRD is useful if the solid form is in dispute, and a residual-solvent panel if the process uses solvents. The laboratory should state its detection limit for every screen; “not detected” without a limit says more about the method than about the lot. Keep the chain of custody: the sample tested should be the retained sample, and the report should carry the lot code. ## Comparing two suppliers Compare suppliers on seven lines: form and CAS; assay and basis; rotation with its conditions; the D-serine limit or chiral result; loss on drying; metals and microbiology; mesh and pack. An assay match is not a specification match if the rotation conditions or the D-serine limit differ. Traceability is the second layer. Ask who made the lot, which process and strain were used, and which drying and milling steps applied. The catalog specification is on the L-serine product page. The enantiomer tests are on the identity page; the grade choices are on the grades page; method notes sit under methods; the quality page describes release. ### 02 L-serine grades: the L form, the mesh and the file URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-serine/grades/ Reviewed: 2026-11-19 L-serine is supplied in this catalog as the L enantiomer, 98.5–101.5% by HPLC, a white crystalline powder at 40 mesh, with granulation on request. The grade question is not a purity ladder: it is the form (L, D or DL), the mesh, the document set and the end use. A higher assay does not turn a D-serine lot into L-serine, and a granulated lot is a physical variant of the same molecule. In one lineGrade in L-serine is a decision about the enantiomer, the mesh and the file, not about a higher assay number. ## Why the form is the grade “Food grade” and “supplement grade” are trade descriptions rather than a single legal status. The L form is the specification this page describes. D-serine and DL-serine are different substances with different CAS numbers, and a technical grade is made for industrial use; this catalog carries the food and supplement grade. A grade name on a quotation therefore describes a file and an end use, not a purity level. A food lot and a technical lot can both run a tight assay. What an auditor looks for is whether the contaminant panel, the microbiology and the traceability record were generated for food use, and whether those documents travel with the lot in the drum. The label has to match the form: a panel that names L-serine describes the L amino acid, while a panel that names DL-serine describes the racemate. ## The L form and the related forms side by side L-serine grades and related forms | Form | Configuration | CAS | Assay / rotation | Use | L-serine, food and supplement grade | (2S) | 56-45-1 | 98.5–101.5% by HPLC; +14.0° to +16.0° | Capsules, tablets and powder blends | L-serine, granulated | (2S) | 56-45-1 | Same assay and rotation; granulation record | Flow and dust control | D-serine | (2R) | 312-84-5 | Separate specification; opposite rotation | Reference and non-L work | DL-serine | (2S) and (2R) | 302-84-1 | Racemic; rotation near zero | Reference; not a substitute Rows one and two are the same molecule under two physical specifications; rows three and four are different substances. A certificate that gives only “serine” has left the configuration open, so the buyer cannot tell which row applies. ## Mesh, flow and the physical grade The catalog form is crystalline, and at least 95% of it passes a 40 mesh sieve, whose openings are about 425 µm. Granulation clusters fine crystals into larger particles. It cuts dust, improves flow and can make a stick pack or a tablet press run more smoothly, but it may slow dissolution. Milling produces the opposite effect: finer particles dissolve faster and can be more cohesive, which can cause trouble in a low-dose capsule or a powder blend. L-serine dissolves freely in water; a 1% solution has a pH of 5.0–7.0. The dissolution rate still depends on mesh, temperature and agitation, so the grade should be tested in the intended process rather than only in water. A granulated lot can cake in a humid store as readily as a fine one; granulation changes the flow, not the moisture sensitivity. The mesh number is a release limit rather than a description of the powder. Two powders can clear the same sieve and still flow differently in a hopper, because their size distribution and particle shape are not the same. Ask for the distribution when flow or content uniformity is critical, and handle a mesh change as a specification change. ## The label arithmetic and the assay basis The assay is written on the dried basis, with loss on drying at ≤0.5%. Convert it to as-is before weighing. A 99.0% dried result with 0.3% loss on drying corresponds to 98.7% as-is; a 500 mg declaration therefore needs 506.6 mg of powder. This is arithmetic rather than a lot result, so use the lot's own figures. The label decides the form. A label that names L-serine needs the L enantiomer. A DL lot is a mixture of both enantiomers, so it cannot be declared as L-serine; the D fraction is a different substance. A blend that contains serine and glycine declares each amino acid separately, because the two are separate ingredients with different weights and different assays. The mesh also changes the fill. A 40 mesh powder and a granulated lot have different bulk density and flow, so the fill weight on a capsule line can shift even when the assay is identical. Recheck the fill and the content uniformity after a grade change, and keep the grade name on the specification rather than only in the purchase order. ## What the specification should say - “L-serine, CAS 56-45-1, C3H7NO3, (2S)-2-amino-3-hydroxypropanoic acid.” - “Food and supplement grade. HPLC assay 98.5–101.5% (dried basis); LOD ≤0.5%.” - “Specific rotation +14.0° to +16.0° on a dried basis; state the solvent, concentration and temperature.” - “Infrared and HPLC for identification; the agreed D-serine limit reported.” - “pH 5.0–7.0 in a 1% solution; at least 95% through 40 mesh, or a granulated grade to the agreed size range.” - “Heavy metals and microbiology as listed; food-grade documents with each lot.” DL-serine is the wrong choice when the label names L-serine. D-serine is not a grade of L-serine, and a technical grade is the wrong choice for a supplement even when the assay matches. Granulation is the wrong route when the process needs a fine powder for rapid dissolution or uniformity; the mesh is part of the specification, and a move between them needs change control, not a packing note. The catalog specification is on the L-serine product page; the certificate lines are explained on the COA page; the one-hydroxymethyl difference from glycine is on L-serine vs glycine; the other hydroxyl amino acid is covered on the L-threonine page; the tests that separate the forms are on the identity page. ### 02.1 L-serine vs glycine: one hydroxymethyl group URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-serine/grades/l-serine-vs-glycine/ Reviewed: 2026-11-19 L-serine and glycine differ by one hydroxymethyl group: serine is C3H7NO3, 105.09 g/mol, and glycine is C2H5NO2, 75.07 g/mol. The 30.03 g/mol difference changes the assay method, the identity tests and the label. Glycine is achiral; L-serine has one stereocentre and a specific rotation. The two are separate ingredients and cannot be substituted by weight. In one lineOne hydroxymethyl group separates the two molecules, and it changes the molecular weight, the assay method, the identity test and the label. ## One carbon, one oxygen, two molecules Glycine is the smallest amino acid: an amino group and a carboxyl group on the same carbon, with two hydrogen atoms filling the rest of that carbon. Serine keeps the same backbone and replaces one of those hydrogen atoms with a hydroxymethyl group, -CH2OH. The change is small on paper, but it makes the two separate specification items with separate CAS numbers. L-serine and glycine · structure and constants | Property | L-serine | Glycine | CAS number | 56-45-1 | 56-40-6 | Formula | C3H7NO3 | C2H5NO2 | Molecular weight | 105.09 | 75.07 | Side chain | -CH2OH | -H | IUPAC name | (2S)-2-amino-3-hydroxypropanoic acid | 2-aminoacetic acid | Chirality | One stereocentre; L form | Achiral | pKa (carboxyl / amino) | About 2.2 / 9.2 | About 2.3 / 9.6 | Isoelectric point | 5.68 | 5.97 | Nitrogen content | 13.33% | 18.66% The isoelectric points are close, so pH is not a way to tell the two apart. Nitrogen content differs by about 5.3 percentage points, and the molecular weight differs by 30 units, which LC-MS sees at a glance. Both are white crystalline powders and both dissolve freely in water, which is why the certificate has to name the molecule and not only the appearance. ## The 30.03 g/mol difference on the balance The molecular-weight ratio is 105.09 ÷ 75.07 = 1.400. On a molar basis, 1 g of L-serine is 9.52 mmol and 1 g of glycine is 13.32 mmol. To replace 1 g of L-serine with glycine at the same molar amount, use 0.714 g; to replace 1 g of glycine with L-serine, use 1.400 g. Neither figure is a recommendation; it is the arithmetic that keeps a formula and a label in agreement. Assay correction comes on top. A 99.0% dried assay with 0.3% loss on drying is 98.7% as-is, so the weighed amount is divided by 0.987 before any molar conversion. Apply both steps or the two errors compound. The assay basis is not a rounding detail when the dose is low and the capsule fill is tight. A label that declares 1 g of L-serine is not satisfied by 1 g of glycine. At the same mass the glycine amount is 40% higher in moles, and the ingredient is different. The reverse substitution also changes the mass and the declared ingredient. The balance, the label and the certificate should use the same molecule, the same salt or free form and the same basis. ## Two assay methods, two specifications Glycine is assayed by titration on the dried basis. The catalog range is 98.5–101.5%, with loss on drying ≤0.2%, chloride ≤0.1% and residue on ignition ≤0.1%. L-serine is assayed by HPLC on the dried basis at 98.5–101.5%, with loss on drying ≤0.5% and pH 5.0–7.0. The methods are not interchangeable: a titration that counts acid and amino groups cannot distinguish glycine from serine, and an HPLC method that has not resolved the two peaks cannot prove either. Neither molecule has a strong ultraviolet chromophore at conventional wavelengths. The serine method usually needs derivatisation or a low-wavelength detector, and the certificate should name the chemistry. Glycine's titration is a total acid-base measurement: it is a good assay for a pure lot and a poor identity test. A certificate that carries a glycine titration result and calls the material serine has not measured serine. Specific rotation belongs to the serine side only. Glycine is achiral and has no rotation to report. The catalog range +14.0° to +16.0° is part of the L-serine specification, and it is not a shared amino-acid parameter that can be copied across to glycine. ## IR, HPLC and the mass that separates them Infrared spectroscopy distinguishes the two in the fingerprint region, because the hydroxyl group and the extra carbon change the spectrum. HPLC retention separates them if the method is designed for it. A single peak at one retention time is not proof unless the method was shown to resolve the other amino acid, and a method that runs one standard has not shown that. LC-MS confirms the mass. Protonated serine appears at m/z 106.1 and protonated glycine at m/z 76.1, a 30-unit gap that matches the formula difference. Serine has one stereocentre, so L-serine and D-serine are enantiomers; glycine has none. A chiral HPLC method or the specific rotation is needed for serine and is not applicable to glycine. X-ray diffraction can compare the crystal patterns, and the two are different solids. It is not a routine release test, and it does not measure the enantiomer. It is useful when the question is whether a lot is crystalline serine or an amorphous blend, not when the question is which amino acid is in the drum. ## Two names, two ingredients In the European Union, the ingredient list names each amino acid, and a blend that contains both must declare both amounts. A US Supplement Facts panel declares each dietary ingredient and its amount per serving. Format follows the market and the product; the brand's reviewer confirms it. The L is part of the name for serine, because the enantiomer is part of the identity. Glycine has no L or D form, so “glycine” is complete. A specification that says only “serine” leaves the enantiomer open, and a label that says “serine” is ambiguous where the market requires the L form. The two are not interchangeable in a formula. Glycine is not a “free-form” version of serine, and serine is not glycine with a filler. Each has its own specification, assay, identity test and label. A supplier who offers “amino acids” as a category has not specified either ingredient. ## When to choose which Use L-serine when the label and the formula are both about serine; use glycine when they are both about glycine. A blend that uses both needs both on the specification, both tested and both declared. This is a labelling and specification choice, not a ranking by purity. The wider context is on the L-serine product page, the glycine product page and the L-threonine page. The assay lines are explained on the L-serine COA page; method notes sit under methods; the quality page describes release. ### 03 L-serine keeps dry; moisture, heat and reducing sugars set the shelf life URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-serine/stability/ Reviewed: 2026-11-19 L-serine is stable as a dry solid in a sealed pack, and the catalog loss on drying of ≤0.5% is a release gate rather than a storage allowance. Moisture, heat and reducing sugars are the practical risks: the powder picks up water and cakes, the as-is assay falls, and a blend can brown. An aqueous solution is a less stable format and supports microbial growth, so a liquid needs its own preservation, process and hold-time data. In one lineThe dry crystal keeps; moisture, heat and a reducing sugar are what change the powder, and an aqueous solution needs its own shelf life. ## The powder: moisture, caking and the pack The specification allows ≤0.5% loss on drying at release. That figure is a gate, not a budget for storage. After the pouch is opened, the powder exchanges moisture with the air; the loss on drying climbs, the as-is assay drops, and the powder may cake until it no longer flows. A dry store and a closed pack are therefore part of the working specification. Foil is the moisture barrier in the 1 kg pouch, and the heat seal is the part most likely to fail. A folded-over opening is not a heat seal, and the air trapped in the pouch is a source of water. If the pack will be held for months, move the remainder into a smaller dry container or finish it within the in-use period. In the 25 kg drum, the inner liner does the same job. Keep it closed, keep the drum off a damp floor, and write the opening date on the label. A drum left open in a warm room can develop a caked surface while the centre still assays correctly; that is a storage incident and should be recorded. ## The solution: microbial and chemical risk together Serine is freely soluble, and a 1% solution is close to neutral (pH 5.0–7.0). Neutral water is also a good medium for microorganisms, so an unpreserved solution fails microbiologically before it fails chemically. A liquid needs a preservative system, a validated hold time and a microbiological test at release. The amino group can react with reducing sugars, especially with heat, in a Maillard-type reaction that browns the solution and consumes serine. Under hot alkaline conditions the hydroxyl side chain can also be lost. A cool, near-neutral, protected solution is easier to hold, but the hold time still has to be measured in the real matrix. Light matters less for the solid than moisture does. Keep the powder in its opaque pack or a closed container; a clear jar on a bench is a poor choice for a moisture-sensitive solid even when the light is indirect. ## What shortens the shelf life Factors that move L-serine during storage | Factor | What it does | Control | Moisture | Caking; raises loss on drying; lowers the as-is assay | Sealed pouch; dry store; closed liner | Heat | Accelerates browning and degradation in solution | Controlled store; cool process | Reducing sugars | Maillard browning; amino acid loss | Reformulate or control water activity and heat | pH | Alkaline elimination and colour change | Validate the matrix pH; buffer if needed | Microorganisms | Growth in an aqueous solution | Preservative, sterility and hold-time validation | Oxygen | Colour and flavour change in a liquid | Low headspace; protected process These effects reinforce one another. A warm, humid store combines moisture uptake with a faster reaction rate, and a neutral solution in an open vessel combines microbial growth with oxygen exposure. The practical question is not whether serine is stable in general, but how long it lasts in a named pack under a named condition. ## Designing a stability study Record the pack, the condition, the time points and the tests. A common design uses 25 °C/60% relative humidity for long-term, 30 °C/65% for intermediate and 40 °C/75% for accelerated storage. The report should name the pack and the lot family rather than only the product. At each point, test assay, rotation, loss on drying, pH, appearance and microbiology. Rotation belongs in the panel because a stereochemical shift would not show in the assay. For a liquid or stick pack, run the same tests in the matrix at the process pH and heat load, and add preservative efficacy where needed. Use data for the pack you will actually buy. A drum and a pouch differ in headspace, surface area and how often they are opened, so a result from one pack does not automatically describe the other. ## The finished formula changes the risk A capsule or tablet has little free water, but the shell and excipients can still carry moisture into a moisture-sensitive fill. Measure loss on drying at release and again after storage, and inspect the fill. A stick pack depends on the foil and the seal: one pinhole fails the pack, so inspect the strip as well as the powder. A drink brings pH, heat, oxygen and microorganisms together. Bulk stability is only the starting point. A gummy adds water and heat, and a reducing sugar in the recipe gives browning a route. Any overage is a label and stability decision for the formulator; it cannot compensate for a pack that admits moisture. ## How a shelf life is assigned We do not assign one shelf life to L-serine in general. The retest period belongs to a pack and a storage condition, and the stability file for that combination supports it. A number without those qualifiers is not a shelf life. When the retest period ends, re-test the retained sample before extending use. Extension is not automatic, and a bulk result does not transfer to a repacked container. Standard packs are on the product hub. Release testing is on the COA page; pack and lead time are on the MOQ page; assay methods are under methods; the quality page describes release. ### 04 L-serine: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-serine/moq/ Reviewed: 2026-11-19 The smallest L-serine order is a 1 kg foil pouch; the bulk pack holds 25 kg in a fiber drum, and the standard lead time is 1–7 days. To turn an enquiry into a quotation that can be compared, the buyer needs to state the L form and CAS number, the assay basis, the quantity and pack, the destination and Incoterm, the documents required and the intended use. In one lineA 1 kg pouch is the smallest unit we can trace as a lot: it covers a trial, a retained sample and an outside test, and it arrives with its own certificate. ## Why 1 kg is the minimum Three jobs fit inside a 1 kg pouch: a bench trial, material kept for reference and a separate identity test. It also travels by air without a pallet, which helps when material is needed before the production plan is signed off. The pouch is a lot with a code, not a scoop taken from a drum. Below 1 kg the material is normally split out of a larger batch and repacked. The chemistry does not change, but the original pack identity is lost, handling increases and traceability becomes harder. At the other end, a 25 kg drum reduces handling per kilogram while tying up inventory for longer. The minimum is set by the pack, not by a volume target. ## Packs and physical forms Standard L-serine packs | Pack | Contents | Where it fits | Handling note | Foil pouch | 1 kg | Bench trial, retained sample, short run | Water-vapour barrier; close it after use | Fiber drum | 25 kg | Full production | Liner stays closed; lot code on drum and liner | Granulated powder | 1 kg or 25 kg on request | Better flow, less dust | Size distribution changes The catalog powder passes 40 mesh at ≥95%. Granulation is a separate physical specification, not a packing decision. If the process needs better flow, raise it before the quote, because the particle-size line changes and the lead time may change with it. ## Lead time and shipping Standard packs are quoted at 1–7 days from confirmation. The window covers picking, paperwork and dispatch, not the sea or air transit, customs or the customer's own release. A granulated batch or a special pack takes longer, and that extra time should appear as a separate line in the quotation. The dispatch date is more useful than the lead time. A drum usually moves on a pallet; a pouch can move as a parcel. The Incoterm sets who arranges freight and who handles customs clearance, and the documents should travel with the lot rather than after it. ## What makes a quotation complete Six details make a quotation comparable: - Product and form. L-serine, CAS 56-45-1, with the L configuration and the grade written out. - Specification. Assay method and basis, rotation, loss on drying, pH, mesh, metals and microbiology. - Quantity and pack. Pouch, drum or granulated, with the net weight stated. - Destination and Incoterm. Country, port or address, and trade term. - Documents. COA, specification, SDS and any importer-specific statement. - Intended use and market. Supplement, food or other use, and the country of sale. A quotation that omits the market or the form is not complete. One powder can suit a destination and fall outside its file, and the paperwork is part of what is being bought. Commercial terms belong on the quotation, not on this page. ## The sample has to be a lot The 1 kg pouch is the qualification lot. Check identity, assay, rotation, loss on drying and microbiology before scaling up, and retain material from the same pouch. Sample, certificate and quotation should carry the same lot code. If the sample cannot be linked to a lot, it is a demonstration rather than a qualification. For a smaller bench trial, ask before ordering. A split from a drum carries its own traceability and is not the catalog pouch, and the record should say so. A bench sample and a production drum are not necessarily from the same batch. ## Terms to agree before ordering The quotation covers the commercial terms, Incoterm, pack, lead time and documents. The quality terms sit next to them: specification revision, COA per lot, retained sample, retest period and change control. It is easier to agree a quality agreement before the first production order than to negotiate one after a dispute. Replacement and return terms sit in the quotation and in that agreement. If a lot fails the specification, resolve it through the retained sample and a jointly agreed re-test, not a photograph of the powder. Agree in advance who pays for the referee laboratory and which laboratory both sides accept. The catalog specification is on the product hub. Release tests are on the COA page; market files are on the compliance page; the MOQ glossary entry defines the term; release is described on the quality page. ### 05 The regulatory file for L-serine, market by market URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-serine/compliance/ Reviewed: 2026-11-19 L-serine is bought as a food or supplement ingredient, so its regulatory file has to describe the material, the released lot and the destination market together. This page names the frameworks and the documents that belong in that file; it does not replace the buyer's regulatory review. The supplier's part is the specification, the batch certificate and the change-control record, and those should refer to the same version. In one lineThe specification covers the powder; the market file has to show the permitted route, the limits that apply and the label wording for the destination. ## The four questions the file answers The file has to answer four things: what the material is and which specification revision applies; which lot is being released and what its certificate says; which limits and labelling rules the finished product must meet; and what happens when the source, process or pack changes. The COA covers the lot, the TDS covers the specification and the SDS covers handling. The route question sits outside all three. Add the allergen and GMO declarations, the origin file, the residual-solvent declaration and any customer-specific document. If a statement is missing, name the gap before the order rather than finding it at customs. Keep a list with version numbers; a folder of undated PDFs is not a file. An amino acid supplied as food or a supplement ingredient does not automatically enter the food-additive route. Additive and supplement routes are separate, and the destination market's regulatory team decides which one covers the finished product. ## European Union The EU review starts with the material, the contaminant results and the label. Regulation (EC) No 178/2002 sets the general food-law framework; Directive 2002/46/EC covers food supplements; Regulation (EU) No 1169/2011 covers labelling; Regulation (EU) 2023/915 sets contaminant limits. Product-specific rules may also apply. The consolidated text in force at the time of sale is the reference. Novel-food status is a separate question under Regulation (EU) 2015/2283. The buyer's regulatory team checks whether the ingredient and the intended use fall inside that framework for the destination member state and keeps the conclusion on file. Meeting a specification does not settle the route. Great Britain and Northern Ireland are reviewed separately: GB uses the GB register and GB labelling, while Northern Ireland follows the EU framework. One shipment can require two different files. ## United States US review begins with the dietary ingredient or food substance and the use it is put to. A dietary supplement is governed by the Federal Food, Drug, and Cosmetic Act as amended by DSHEA, with the current good-manufacturing-practice rules in 21 CFR 111 and the supplement labelling rules. If the dietary-ingredient route requires a notification, the buyer's team confirms that the basis covers the ingredient and the finished product. A conventional food use follows the food-additive or GRAS route instead, and the two are not interchangeable with the supplement route. The supplier documents the material; the buyer selects the route. Label and claim review are separate from the certificate. ## Contaminant limits The contaminant numbers have to be calculated for the finished product, because a drum result does not account for the daily dose or the other ingredients. The table is a starting point for a supplement file; the current destination text and the dose decide the final limit. Contaminant reference values for a finished supplement | Parameter | Ingredient specification | Finished-product reference | Evidence the file should hold | Lead (Pb) | ≤3 mg/kg | 3.0 mg/kg in the supplement (EU) | Lot result, method and the dose calculation | Cadmium (Cd) | ≤1 mg/kg | 1.0 mg/kg in the supplement (EU) | Lot result and any category exception | Mercury (Hg) | ≤0.1 mg/kg | 0.10 mg/kg in the supplement (EU) | Lot result and method | Arsenic (As) | ≤2 mg/kg | No harmonised EU limit; customer limit | The agreed limit and the method The arithmetic is the evidence. A lot at 3 mg/kg lead can still put the finished product over its limit when the dose is high or another ingredient contributes lead. Show the calculation. Also distinguish “below the limit” from “below the detection limit”, because they mean different things. ## Claims and the label A label has to state the material, its quantity and its source in the form the destination requires. For L-serine the L form belongs in the name because the enantiomer is part of the identity. Claim review is a separate exercise: the brand's reviewer confirms the wording is permitted for the product, its form and the destination. EU health claims fall under Regulation (EC) No 1924/2006 and must be authorised for the effect claimed. In the US, a structure-function claim needs the required disclaimer and substantiation, while a disease claim is outside that route. This page makes no disease-related claim. A certificate is not a claim approval, and a claim does not alter the specification. ## Documents that belong in the file - Specification, with version, CAS number and L form. - Batch COA with methods, limits and results, including rotation. - Technical data sheet and safety data sheet. - Allergen, GMO, origin and residual-solvent declarations. - Irradiation and BSE/TSE statements where required. - Change-control record for source, process, mesh and pack. The documents must agree. If the specification names L-serine, the certificate says only “serine” and the label says neither, the file has a gap even when each page looks complete. Keep version numbers and lot codes so a later question can be answered from the file. ## Checklist before ordering - The specification revision, CAS number and L form are identified. - COA, TDS, SDS and the allergen, GMO, origin and residual-solvent declarations are present. - The contaminant figures are expressed at the finished-product dose. - The label and any claim have been reviewed for the destination. - Source, process, mesh and pack are under change control. - Quotation, specification and certificate use the same version. The catalog specification is on the L-serine product page. For the lot record, see the COA page; for the analytical case, see the identity page. The quality page sets out the release file, and the EU regulatory note gives the framework references. A related amino acid is handled on the glycine page. ### 06 How we prove an L-serine lot is the L enantiomer URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-serine/identity/ Reviewed: 2026-11-19 An L-serine lot is the named material when the record names the form and CAS number, infrared and HPLC match the reference, the specific rotation is inside +14.0° to +16.0° (c=10, 1 M HCl), and the assay with loss on drying closes the mass balance. The rotation is the line that separates the L form from D-serine and from a racemate. The assay alone cannot do it, because an achiral HPLC method sees both enantiomers as one peak. In one lineThree answers have to line up for serine: IR and HPLC for the molecule, polarimetry for the L form, and assay plus loss on drying for the amount. ## The five identity layers A certificate may name the correct material without proving that the material is correct. Identity is not one test: each layer below answers a different question, and the answer to one does not cover the next. A supplier who supplies only the first has provided paperwork rather than evidence. Five layers of L-serine identity | Layer | Question | Test | What it proves | Paperwork | Is the identity stated? | Name, CAS and formula | A declaration only | Infrared | Is it serine? | FTIR spectrum | The molecule, not its mirror image | Chromatography | Does the peak match serine? | Retention and m/z 106.1 | The molecule, not its mirror image | Polarimetry | Which enantiomer? | Rotation under stated conditions | Direction and a rough excess | Mass balance | Is it diluted? | Assay, LOD, related substances | Whether the figures agree The paperwork layer is necessary but not sufficient. The other four are what make it true. A certificate that gives an assay and no rotation has left the enantiomer untested; a certificate that gives a rotation and no assay has left the amount open. ## The rotation as a ratio Specific rotation is a ratio: [α] = α ÷ (l × c), where α is the measured angle, l is the path length in decimetres and c is the concentration in grams per millilitre. The catalog range +14.0° to +16.0° on the dried basis assumes a stated solvent, concentration, temperature and wavelength. A rotation quoted without those conditions is not comparable with another laboratory's result, even when both numbers look similar. The rotation of a mixture is the weighted sum of its components. A racemate reads near zero, and a lot with a D fraction reads below the pure L figure. The rotation can estimate the D fraction only when both endpoints and the conditions are known, and a small fraction is hard to see against the measurement uncertainty. Chiral HPLC is the quantitative test; the rotation is the release gate. Glycine has no stereocentre, so it has no specific rotation to report and no enantiomer to test. That is one difference between the two molecules, and it is why a rotation line belongs in the serine specification but not in a glycine one. The comparison is set out on L-serine vs glycine. ## X-ray diffraction: the crystal check X-ray diffraction asks whether the solid is crystalline and whether its pattern matches a reference. L-serine is crystalline, so its pattern can be compared with a reference or with an earlier lot. The method can distinguish a crystalline powder from an amorphous blend or a dilution, and it can show that two lots share a solid form. It does not measure purity or the enantiomer. Before accepting a “match”, ask to see the reference diffractogram and the detection limit. XRD is not a routine release test here; a line that says “XRD conforms” without the pattern adds little. The method earns its place when solid form is disputed or when a lot has failed a dissolution or flow check and the crystal form is suspected. ## Substitution routes and their signals Common L-serine substitutions and the signals | Substitute | Effect on the lot | Warning sign | Check | Glycine | White powder; 30.03 g/mol lighter; achiral | Assay low; rotation falls; different retention | HPLC, IR, LC-MS at m/z 76.1 | D-serine | Same mass and similar retention; opposite rotation | Rotation below the L range | Polarimetry; chiral HPLC | DL-serine | Racemic; rotation near zero | Rotation near zero | Polarimetry; chiral HPLC | Other amino acids | Similar acid-base behaviour; different mass | Extra peak; mass difference | HPLC, IR, LC-MS | Dilution or moisture | Lowers the assay; raises loss on drying | The figures do not reconcile | Assay, LOD, related substances Glycine is the nearest substitution: one hydroxymethyl group lighter, also a white crystalline powder, and achiral. A serine/glycine blend can be formulated to sit inside the assay range; the rotation falls as the serine fraction falls, and an HPLC method that resolves the two gives direct proof. A certificate with appearance and assay but no identity result has left the likeliest substitution untested. D-serine and DL-serine have the same retention as L-serine on an achiral column, so chromatography alone cannot see them. The rotation is the first screen and chiral HPLC is the confirmation. A lot at +6.5° is inside the catalog range, but the range is not a guarantee that the D fraction is zero. ## The identity clauses in the specification - “L-serine, CAS 56-45-1, C3H7NO3, (2S)-2-amino-3-hydroxypropanoic acid.” - “HPLC assay 98.5–101.5% (dried basis); LOD ≤0.5%.” - “Specific rotation +14.0° to +16.0° on the dried basis, with solvent, concentration, temperature and wavelength.” - “Infrared and HPLC identification; report the D-serine result or the agreed limit.” - “pH 5.0–7.0 at 1%; particle size ≥95% through 40 mesh.” - “Heavy metals and microbiology as listed; no other amino acid above the agreed limit.” - “Destination market and label form confirmed before the order.” ## Five questions to ask - Which enantiomer does this lot carry, and what CAS number appears on its certificate? - Will you send the infrared spectrum and the HPLC chromatogram alongside the assay figure? - What is the specific rotation for this lot, and under which solvent, concentration and temperature was it measured? - What is the D-serine result or limit, and was a chiral method used? - Would you agree to a joint re-test of the retained sample if a result is challenged? Those five answers, taken together, form an identity file; one assay figure does not. The product hub holds the catalog specification. The COA page explains where each value appears on the certificate; the grades page sets out the forms; L-serine vs glycine covers the closest substitution; the glycine page covers the other molecule; method notes sit under methods, and the quality page describes release. ### 01 What the COA for acid protease actually contains URL: https://nutrition.rainwoodbio.com/products/enzymes/acid-protease/coa/ Reviewed: 2026-11-19 An acid protease certificate is read in two halves. The first half is routine: appearance, moisture, mesh, metals and microbiology. The second half is the activity line, and that line is a measurement whose value depends on the method behind it — the substrate, the acid pH, the temperature and the standard. The limits shown here are the catalog specification for acid protease powder; a batch COA is the record for one lot. In one lineThe activity figure on an acid protease COA is a rate measured at a named acid pH, so the unit definition, the substrate and the assay conditions have to appear beside the number. ## The certificate as a test report A certificate should let a reviewer reconstruct the release without asking the supplier. Each row needs the parameter, the method and the acceptance limit; the measured result should sit in its own column. For an enzyme, the activity row needs two more things: the unit definition and the assay conditions. Catalog release limits · acid protease powder | Parameter | Method | Release limit | Appearance | Visual | White to off-white, free-flowing powder | Acid protease activity | Folin-Ciocalteu colour at acid pH; substrate and conditions printed on the COA | ≥100,000 U/g | Identification | Activity assay and infrared spectroscopy | Conforms to the reference | Loss on drying | Gravimetric | ≤8.0% | Particle size | Sieve analysis | ≥95% through 40 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent Read the identification row carefully. Infrared spectroscopy confirms that the sample is protein, not which protein; the activity assay confirms that the protein cuts a substrate under acid conditions. The organism that produced it is a specification item, not a certificate line. ## The unit is a rate, and the method defines it U is a rate. One unit is defined by the amount of product released per minute under fixed conditions, so a number without those conditions cannot be compared with anything. The common acid protease method uses casein at pH 3.0 and 40 °C, stops the digestion after a set time and quantifies the released tyrosine with Folin-Ciocalteu reagent. One U corresponds to 1 µg of tyrosine equivalent per minute. A method sheet that uses another acid pH or another protein is a different scale, even if it prints the same U/g. The activity entry · what a complete method states | Element | What it has to say | Why it moves the result | Unit | U per gram of the powder as sold | Activity per gram of protein is a different measure | Substrate | The protein used, with grade and concentration | Different proteins expose different bonds | pH | The acid pH of the assay, typically 3.0 | Rate changes sharply across the acid profile | Temperature | 40 °C in the common method, or as stated | Heat raises the rate until unfolding begins | Time | Digestion time before the reaction is stopped | The reaction is linear only for part of the curve | Detection | Folin-Ciocalteu colour, tyrosine standard | The standard curve sets the scale | Basis | As-is or dry-solids corrected | Water changes the denominator Moisture is the quiet variable. A powder at 100,000 U/g as-is with 8.0% loss on drying corresponds to about 108,700 U/g on dry solids. Both numbers are true, and a comparison that ignores the basis invents a difference. Multiply the per-gram figure by the pack weight to get the units in the pack: 1 kg carries 100 million U at the catalog floor. ## Where the limit ends and the result begins Activity has a floor, not a ceiling. A lot at 103,000 U/g and a lot at 170,000 U/g both meet ≥100,000 U/g, but the second leaves more room for losses in granulation, tableting or storage. The result column is where that difference appears; the limit column never shows it. A certificate that prints the specification range as the result has not reported a measurement. Ask for the measured value, the method used and the release date. Also ask whether the figure is release activity or end-of-shelf-life activity; those are different promises. A lot shipped late in its life arrives with less than the release figure. The methods index shows how the assay families are described. ## What moves between batches Three stages move the activity. Fermentation determines how much enzyme the broth contains; recovery and concentration determine how much survives into the concentrate; standardisation and drying determine where the powder lands per gram. Because the last stage is a blend, two lots can agree on U/g and disagree on protein, carrier and specific activity. Process temperature and moisture move the result during drying and milling. A darker or greyer shade can follow a longer hold or a hotter dryer while the activity still passes, so colour is a prompt to ask, not a release test. The pH of a 1% solution can shift with the fermentation or with the salts used in standardisation. The method can shift too: a new substrate lot or a different assay pH makes two U/g figures non-comparable, even when both certificates look identical. ## When a second laboratory earns its fee An independent laboratory is useful when the source is new, the market is regulated, the result is disputed or the customer requires its own release. The core panel is activity by the customer's method on a retained sample, protein, moisture, metals by ICP-MS, microbiology and a protein pattern by gel electrophoresis. Add a pH-activity profile when the identity of the enzyme is contested. Insist that the referee uses the same substrate and acid pH as the specification; otherwise the exercise compares methods. Each metal result should carry a reporting limit, and each microbiological absence should name the test. The sample tested and the sample retained must be the same, with the lot code on the certificate, the pack and the report. ## Six lines for a supplier comparison Compare six things: preparation and CAS, unit definition and assay pH, measured activity, protein and specific activity, moisture and mesh, organism and carrier. A quotation that matches only on the activity figure has matched one line out of six. The second question is traceability. The lot code, organism, carrier and specification version should line up across the certificate, the pack and the retained sample. The product page lists the catalog values; the identity page covers the evidence; the neutral protease page shows the other pH window; the quality page describes release. ### 02 100,000 U/g, a granulation or a dilution: choosing an acid protease grade URL: https://nutrition.rainwoodbio.com/products/enzymes/acid-protease/grades/ Reviewed: 2026-11-19 The standard acid protease grade is a 40 mesh powder at ≥100,000 U/g, packed at 1 kg and 25 kg. Granulation can be ordered for flow or dust control, and a lower-activity dilution can be agreed as its own specification. The decision is about how much powder one dose needs, how the powder behaves in the room and what the label declares. In one lineA grade changes the activity per gram, the particle and the carrier, while the enzyme and its acid behaviour stay the same. ## Concentration first, then mass Begin with the unit target. The catalog powder carries 100 U of activity in every milligram, because 100,000 U/g is 100 U/mg. A capsule that needs 10,000 U takes 0.1 g of this powder; at 50,000 U/g the same capsule would take 0.2 g, and at 25,000 U/g it would take 0.4 g. Fill weight, capsule size and blend space all follow from that division. The concentrate is the natural choice for a small inclusion. A dilution can make a low unit target easier to weigh, at the price of more carrier and a longer ingredient list. Granulation changes the particle, not the activity per gram, although the process used to make the granule can cost activity. ## Three options, one unit definition Acid protease grades · what changes in the drum | Grade | Activity | What it is | Fits | Watch | Catalog 40 mesh powder | ≥100,000 U/g | The standard preparation; carrier declared on the COA | Capsules, tablets and small inclusions | Dust, static and tiny weighings | Granulated powder | Same unit definition | Agglomerated particles, made to order | Tableting, sachets and low-dust rooms | Heat and moisture during granulation | Lower-activity dilution | Set in the specification | Standard powder plus a declared carrier | Stick packs and blends that need bulk | Carrier declaration; separation in the blender A dilution is a legitimate grade only when its carrier and its lower activity are in the specification. It is not a way to keep a 100,000 U/g label on a weaker powder. ## What the powder does in the room A 40 mesh powder passes about 425 µm openings. It pours, it dusts and it can hold static, which makes a small weighment wander on the balance. Enzyme dust is a respiratory sensitiser, so the room needs extraction or a weighing booth and the operator needs the controls in the safety data sheet. Granulation can cut dust and improve flow, but it adds variables: the binder, any liquid, the dryer setting and the final milling. Each becomes a specification line, and the activity must be re-measured on the granule rather than inferred from the base powder. For a dilution, test the particle-size distribution of the blend, not just the enzyme, because a dense carrier and a light powder can stratify in a hopper. ## Fitting the unit target into the pack Put the grade into the dosage form. A capsule with 5,000 U needs 0.05 g of the standard powder, a small charge that is hard to weigh by hand and easy to lose in a blend. A 20,000 U/g dilution would need 0.25 g, which is easier to handle but adds carrier to the formula. A tablet press rewards consistent flow; granulation may help a powder that would otherwise bridge in the hopper, though any wet step brings heat and water into the process. A stick pack rewards dispersion, and a dilution can reduce clumping. In a multi-enzyme blend, changing one component's concentration changes the ratio and the uniformity of the smallest ingredient, and the acid enzyme still needs its local pH to stay in range. ## What the specification should say - “Acid protease preparation, CAS 9025-49-4, ≥100,000 U/g, with the production organism named.” - “The U defined by the Folin-Ciocalteu assay at the stated acid pH, with substrate, temperature, time and standard on the COA.” - “Activity reported as-is; loss on drying ≤8.0%.” - “Particle size ≥95% through 40 mesh; a granulated grade to the agreed size.” - “Carrier named and quantified; a dilution specified separately from the concentrate.” - “Heavy metals and microbiology as listed; activity measured after granulation.” Changing grade changes the paperwork as well. Specification, certificate, label, blend sheet and stability summary all have to be reissued; only the unit definition is unchanged. Without those revisions, one product name covers two different materials. ## When the answer is to keep the grade Keep the catalog grade when the label already declares 100,000 U/g; a dilution would force a label change. Keep the powder when it already flows well; granulation brings heat and moisture but no extra units. Do not introduce a carrier that the customer's specification or the label excludes, and do not choose a dilution so coarse that the capsule can no longer hold the dose. The catalog numbers sit on the acid protease product page; the release lines are on the COA page; the pH comparison is on the neutral protease page; the alkaline alternative is on the alkaline protease page; and the assay families are described in the methods index. ### 02.1 Acid protease vs neutral protease: the pH, the unit and the label URL: https://nutrition.rainwoodbio.com/products/enzymes/acid-protease/grades/acid-protease-vs-neutral-protease/ Reviewed: 2026-11-19 Acid protease and neutral protease are separate enzymes with separate pH windows, assays and units. The acid preparation is specified at ≥100,000 U/g by a Folin-Ciocalteu assay at acid pH; the neutral one at ≥50,000 U/g by a casein assay near pH 7. A U/g figure belongs to its method, and a label that says only “protease” names neither enzyme. In one lineAcid protease and neutral protease work at different pH values and are measured by different units, so one cannot replace the other on a label or in a blend. ## Two mechanisms, two preparations Acid protease is an aspartic endopeptidase, EC 3.4.23, with two catalytic aspartate residues. Neutral protease is a metalloendopeptidase, EC 3.4.24.28, with a zinc ion in its active site. The class difference explains the behaviour: the aspartic enzyme works in acid, and the metallo enzyme works near neutrality. The CAS numbers differ too: 9025-49-4 against 9025-39-2. Each is a preparation with its own organism, process and carrier. A specification written for one does not describe the other, and a blend of both contains two enzymes that have to be declared separately. ## The pH window is the working difference Acid and neutral protease compared on the lines that decide a blend | Line | Acid protease | Neutral protease | Enzyme class | Aspartic endopeptidase, EC 3.4.23 | Metalloendopeptidase, EC 3.4.24.28 | CAS number | 9025-49-4 | 9025-39-2 | Catalog activity | ≥100,000 U/g | ≥50,000 U/g | Assay pH | Acid, usually about 3.0 | Near neutral, usually about 7.0 | Working pH | Acid optimum near 2.5–3.5, useful to about pH 6 | pH 6.5–7.5 in 1% solution | pH of a 1% solution | Acidic | 6.5–7.5 | Effect of a chelator | No metal cofactor, so the activity is not removed by a chelator | The zinc is essential, so EDTA and similar agents can strip it Read the working pH before the assay pH. The first describes the blend; the second describes the certificate. A formulator needs both, and the gap between them is where most of the practical failures sit. ## The unit is not transferable A protease unit is a rate. Both assays may use casein and Folin-Ciocalteu detection, but they run at different pH values, so the numbers are not comparable. The substrate lot, temperature, time and standard move the result as well. No factor converts 100,000 U/g of the acid enzyme into a neutral figure. Within one scale the arithmetic is exact: 1 kg at 100,000 U/g is 100 million units, and 2 kg at 50,000 U/g is also 100 million. That helps with ordering and blending, not with cross-enzyme conversion. If both activities are needed, each is calculated from its own certificate, and the totals are kept separate. The methods index covers the vocabulary. ## What the label and the specification must say Name each enzyme, its activity, its unit and its carrier. “Protease” alone is too broad when the specification or the label is meant to identify one enzyme, and a blend lists both. The activity figure carries its unit definition: 100,000 U/g and 50,000 U/g are different assays, not two strengths. Regulatory status follows the preparation. A food-enzyme entry or a GRAS basis for one organism does not transfer to the other, and a supplement brand still confirms its dietary-ingredient route. The destination file should name the enzyme, organism, carrier and activity basis. When the label, the certificate and the market file use different names, the gap is a compliance issue before it is a labelling one. ## What happens when both are in one formula pH is the first interaction. Acid protease loses activity as the local pH rises; neutral protease loses activity outside its window. Alkaline salts such as calcium carbonate or magnesium oxide can push the acid enzyme out of range, while citric acid or ascorbic acid can push the neutral one out. Measure the blend pH at the start and after storage. The chelator is the second. EDTA and similar agents can strip the zinc from the neutral enzyme without touching the acid one, so a blend may keep its acid activity and lose its neutral activity. Dose each enzyme against its own assay, add each at the point where it is stable, and declare both. The acid grade options are compared on the acid protease grades page. ## Choosing between them Start with the pH the enzyme will meet. An acid blend points to acid protease; a neutral blend points to neutral protease, unless a chelator rules it out. If the process crosses both windows, both may be useful, each with its own certificate. Then check the dose and the pack. At 100,000 U/g the acid powder is twice as concentrated as the 50,000 U/g neutral grade, so the same unit target weighs half as much. A line that cannot weigh small charges may prefer the lower-activity product; a tight capsule fill may prefer the concentrate. The catalog entries are on the acid protease, neutral protease and alkaline protease product pages; the release workflow is on the quality page. ### 03 Acid protease loses activity with heat and moisture; pH decides where it survives URL: https://nutrition.rainwoodbio.com/products/enzymes/acid-protease/stability/ Reviewed: 2026-11-19 Acid protease keeps its activity in a sealed, cool, dry pack and loses it when water, heat or a higher pH reaches the protein. The catalog limits — ≥100,000 U/g and loss on drying ≤8.0% — describe the powder when it is released; they say nothing about an opened pouch or a tablet. The retest period is set from data for the pack and storage condition that will actually be used. In one lineThe dry powder keeps its activity only while the pack keeps water and heat out; in solution, the pH and the hold time decide what is left. ## The dry pack is the benchmark Dry and cool, the powder ages slowly. Water is the switch that changes the rate: the ≤8.0% loss-on-drying limit is a release gate, not a storage allowance. Two powders can pass the same gate and still behave differently if one holds more free water. Water activity in the blend is the better predictor. Packaging is part of the control. The 1 kg pouch is a moisture barrier; the 25 kg drum relies on its liner. A desiccant can help, but it cannot replace a closed seal. Close the pouch between weighings, keep the drum off a damp floor and record the opening date. If the powder has already taken up water, drying it back is not a repair: the activity lost does not return. ## A liquid hold is a different material Dissolved, the enzyme is exposed to water, substrate and itself. The powder gives an acidic solution; the common working range is about pH 2.5–3.5, with useful activity toward pH 6. That range describes catalysis, not stability. Keep any liquid stage short and cool, and assay after the hold. A freeze–thaw cycle adds another loss route. Microbial growth is a separate risk in a liquid, so hold time, preservative and micro control belong to the same study. The dry powder is the storage form; a solution is a process intermediate. ## What drives the loss Stability factors · mechanism and control | Factor | What it does | Control | Temperature | The rate of unfolding rises with heat; steam is worse than dry heat | Cap dryer and granulator temperatures; assay after the step | Water | Free water lets the protein unfold and the powder cake | Sealed pack; desiccant; control water activity | pH above 6 | Takes the enzyme outside its acid working range | Check blend pH; avoid alkaline salts | Protein substrate | In a wet mix the enzyme acts on nearby protein and on itself | Keep blends dry; limit wet holds | Metal ions | Copper and iron can inhibit the enzyme in solution | Use compatible contact surfaces; validate the wet process The rows combine. A warm, wet granulation adds heat and water at once, and an alkaline salt beside the enzyme adds a pH shift together with the moisture it brings. The useful stability question is not whether acid protease is stable in general, but whether this powder in this pack holds its activity for the declared period. ## Test the powder, then the process Design the study around the pack and the matrix. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% relative humidity cover the warehouse; 40 °C/75% relative humidity is an early warning, not a shelf-life assignment. Test activity, loss on drying, appearance and microbiology at 0, 1, 3, 6, 9, 12, 18 and 24 months. Then challenge the process: granulation, drying, tableting, blending. Sample before and after, assay both, and store the finished form at the intended condition. Bracketing is acceptable when the wettest and hottest arm is included. Keep a retained sample per lot and per time point, and record the assay method beside each result so a method change cannot read as a stability change. ## Give the enzyme a dry, late place in the process Place the enzyme late in the process and keep water out of the steps before it. Dry blending and direct compression avoid water; aqueous granulation, film coating and hot drying do not. If a wet step is unavoidable, assay after drying rather than assuming a fixed loss. Watch the local pH. Calcium carbonate, magnesium oxide and sodium bicarbonate can lift the pH above the acid window; citric acid and ascorbic acid sit within it. Measure the blend pH at the start and after storage. Also measure water activity, because a hygroscopic excipient can pull moisture from the air and raise the water activity of the whole blend. An overage needs measured process loss behind it; it is not a substitute for a formula that holds the enzyme. ## How the shelf life is set There is no universal number. The retest period is a property of the pack, the storage condition and the test panel, and it belongs on the specification with the data behind it. State whether the declared activity is at release or at the end of the period. A sealed pouch in a cool store and an opened pouch in a warm room are different products after a month. Re-assay the retained sample before extending use, and do not transfer a bulk result to a repacked container. The release lines are on the COA page; the packs and order details are on the MOQ page; the pH comparison is on the neutral protease page; the assay families are described in the methods index; and the release workflow is on the quality page. ### 04 Acid protease: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/enzymes/acid-protease/moq/ Reviewed: 2026-11-19 Acid protease is sold from 1 kg: the smallest unit is a foil pouch at that weight, and the production pack is a 25 kg fiber drum. Dispatch is quoted at one to seven days after the order is confirmed. To schedule and document the order, the supplier needs the assay pH, the pack, the destination and trade term, the document set and the intended use — not only a quantity. In one lineOne kilogram is the smallest released pack; at 100,000 U/g it holds one hundred million units, which covers a trial, an assay and a retained sample. ## Why the minimum is 1 kg The figure is not a round number; it is the smallest unit that can be released as a lot. At 100,000 U/g the pouch holds at least 100 million units, enough for a bench trial, an independent assay and a retained sample. It also travels as a parcel, so a formulator can start work before the production plan is fixed. A smaller quantity would be split from a larger lot: more handling, a new label and a weaker link to the original release. The drum lowers the handling per kilogram but ties up inventory and storage time. The minimum is set by pack identity, not by a sales target. ## Packs and formats Standard acid protease packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | A separate specification; activity re-measured Three options cover most projects: the pouch, the drum and a granulated version made to order. The first two are catalog packs with their own lot code; the third is a separate specification because granulation can change particle size and activity. All packs are 40 mesh powder unless granulation is agreed. The pouch is the trial pack and the drum is the production pack. Ask for the liner type and the drum closure, and check that the lot code appears on the pack, the liner and the certificate. If the project needs a different mesh or a dilution, raise it before the quotation; it is a specification change, not a packing preference. ## Lead time and dispatch The standard pack is dispatched within one to seven days of order confirmation. That clock covers picking, document preparation and handover to the carrier. Transit, customs and the customer's own release are outside it. Give the required arrival date and the dispatch date separately. A parcel and a pallet do not move on the same schedule, and the Incoterm decides who books the freight and who clears the entry. In warm weather, ask about the route and the storage at the transhipment point; an enzyme that waits in a hot shed loses activity before it reaches the warehouse. ## What a quotation needs A comparable quotation answers six points: - Preparation. Acid protease, CAS 9025-49-4, with the production organism and carrier named. - Method and activity. The U definition, the assay pH and the declared result. - Pack and quantity. 1 kg pouch, 25 kg drum or a granulated grade. - Route. Destination, Incoterm and the required arrival date. - Documents. COA, TDS, SDS and any statement the importer must hold. - Use and market. The finished product and the country of sale. A quote that omits the method and the market cannot be compared with another. Two suppliers can both write 100,000 U/g and mean different assays, and the same pack can be acceptable in one market and outside the file in another. ## The sample is a lot, not a demonstration The 1 kg pouch is the qualification unit. Assay it on receipt, test loss on drying and microbiology, and keep part of the same pack as the retained sample. The lot code on the pouch, the certificate and the quote should be one code. A smaller bench sample can be arranged, but it is a repack from a lot and needs its own record. Do not plan a production drum on the assumption that it will match the bench sample lot; ask for the lot family. Enzyme activity also falls with time, so the sample result is a snapshot rather than a permanent value. ## Terms to settle before the first order Commercial terms — Incoterm, pack, lead time and documents — sit in the quotation. Quality terms sit beside them: the specification version, a certificate for each lot, a retained sample, the retest period and a change-control procedure. Put both in one quality agreement before the first production order. If a lot fails the agreed specification, the route is a joint re-test on the retained sample, not a photograph. Agree in advance which laboratory is acceptable and who pays for the referee. For the catalog values, see the acid protease product page; for the lot tests, the COA page; for the other pH window, the neutral protease page; for shipping, the logistics page; for the release process, the quality page. ### 05 Where acid protease is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/enzymes/acid-protease/compliance/ Reviewed: 2026-11-19 Acid protease is sold as a food enzyme preparation, so its paperwork has to describe the preparation and the market, not just the activity. The catalog specification and the lot COA are inputs to that file; neither proves that the enzyme may be used in a particular product. The destination regulatory route is confirmed by the buyer's team, and the points below are what that review has to settle. In one lineA food-enzyme file answers four separate questions — permitted use, purity, description and claim — and only the first is about the enzyme name. ## Four questions, four answers Four questions sit under the heading of compliance, and they are often answered as if they were one. Can the preparation be used in the intended process or product? Does the lot meet the purity limits? How is it named on the label? What may the brand say about the finished product? Each answer changes with the market and with the production organism. Acid protease is an activity, not an authorised substance. What is assessed and registered is a preparation: organism, strain, medium, recovery and carrier. Two powders with the same U/g can therefore have different regulatory positions. ## European Union Regulation (EC) No 1332/2008 is the EU framework. Marketing and food use depend on entry in the Union list, and transitional national provisions apply where the list does not cover a preparation. Check the current list status for this enzyme and the national rule in the Member State of sale as of this review. A supplier's statement that the product is “EU approved” is not a substitute for that check. The European Food Safety Authority evaluates the production strain and the manufacturing process. The file should cite the application or register entry for the preparation and the use, and it should name the Member State rather than treating the EU as one market. ## United States In the United States the basis may be GRAS, a prior sanction or a food additive regulation, and the supplier should name the basis and produce the document behind it. The Food Chemicals Codex monograph and current good manufacturing practice for the preparation belong in the same folder. A food-use basis does not by itself cover a dietary supplement. A supplement marketer still needs a lawful dietary ingredient and cGMP under 21 CFR 111. The Supplement Facts panel and the claims are reviewed separately, and the brand confirms that the intended use fits the basis. ## United Kingdom Great Britain applies the retained version of Regulation (EC) No 1332/2008. The Food Standards Agency and Food Standards Scotland maintain the register of regulated-product authorisations, and the entry has to be checked for the enzyme, strain and use. Northern Ireland follows the EU regime; a GB check does not answer the Northern Ireland question. ## Contaminants and limits The catalog panel is a release gate for the powder; the market limit applies to the finished product. The file has to show both, and it has to show the conversion from one to the other. Catalog limits and the finished-product calculation | Parameter | Catalog limit | What the file should show | Lead (Pb) | ≤3 mg/kg | Lot result, method and the finished-product figure | Arsenic (As) | ≤2 mg/kg | The agreed limit and the method, stated on the certificate | Cadmium (Cd) | ≤1 mg/kg | Lot result and any category exception that applies | Mercury (Hg) | ≤0.1 mg/kg | Lot result and method | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | The count and the absence statement for the lot | Loss on drying | ≤8.0% | The measured result and the activity basis it supports EU Regulation (EU) 2023/915 sets maximum levels for lead, cadmium and mercury in food supplements as sold. There is no general EU arsenic limit for this matrix, so the catalog figure or a customer limit governs. US state rules and UK limits may be tighter than the catalog, and a customer specification can be tighter still. Name the limit the file is built on. ## Claims and the label No disease-related claim is made for this material, and these pages describe the specification and the file, not an effect in the body. An activity figure is an assay result, not a health claim. The brand owns the finished-product wording and must clear it under the EU health-claims regulation, US supplement rules and the retained UK regime, as applicable. The enzyme file supports identity, activity and purity; it does not support a clinical statement. Keep that boundary visible in the label artwork and in the marketing copy. ## What ships with the lot - Specification with the preparation, CAS number, unit definition and assay pH. - Lot certificate with the result and the limit side by side. - Technical data sheet: activity, solubility, pH and pack. - Safety data sheet with dust and exposure controls. - Allergen statement covering the organism and the carrier. - GMO statement for the organism and its inputs. - Origin and strain record. - Composition statement including the carrier. - Stability summary for the pack being bought. - Residual-solvent declaration for the recovery route. ## Checks before release to a market - Destination, process and finished format are written down. - The organism and strain are recorded, and the preparation matches the regulatory entry. - Contaminant results are converted to the finished-product dose. - Carrier and allergen declarations match the label artwork. - The label names the enzyme, activity, unit, carrier and storage condition. - Claim wording is cleared for the destination, with the evidence held by the brand. The catalog entry is on the acid protease product page; the release lines are on the COA page; the assay families are described in the methods index; the frameworks are summarised in the EU, US and UK notes; the neutral enzyme comparison is on the neutral protease page; and the release workflow is on the quality page. ### 06 How we prove an acid protease lot has the declared activity URL: https://nutrition.rainwoodbio.com/products/enzymes/acid-protease/identity/ Reviewed: 2026-11-19 Four questions have to be answered before a powder can be called acid protease: what preparation is it, what rate does it show at acid pH, how much protein carries that rate, and which lot is in the pack. A certificate that answers only the rate has described one of the four. The pH-activity pair is the check that distinguishes an acid enzyme from a neutral one. In one lineAn acid protease lot is identified by its activity at acid pH, the protein behind that activity and the lot record, not by the number on the certificate alone. ## The four identity layers The layers are separate questions, and a supplier can answer the first with a name and the second with a number while leaving the third and fourth blank. Each answer belongs on the specification or the certificate, not in a covering email. Identity checks · question and evidence | Layer | Question | Evidence | Preparation | Is the name, CAS and source declared? | Specification, CAS 9025-49-4, organism and carrier | Catalytic behaviour | Is the rate acid-dependent? | U/g at pH 3 and pH 7, with the method | Protein basis | How much protein supports the rate? | Protein method and specific activity in U/mg | Traceability | Can the paper be tied to the pack? | Lot code, certificate and retained sample The preparation layer is not clerical. The organism and carrier determine which market file and which label apply, and a CAS number alone does not name the preparation. ## Specific activity and the pH ratio The protein basis is a ratio, not a separate purity claim. Divide activity by protein and the result is U/mg. A carrier reduces both numerator and denominator, so the ratio survives a dilution; heat reduces the numerator only, so the ratio falls. A stable U/g with a falling ratio is a warning that the powder contains more protein for the same activity — a different cut, an inactivated fraction or an undeclared carrier. The acid signature is a second ratio: activity at pH 3 divided by activity at pH 7. For an acid protease the first should be large and the second small; a neutral protease reverses the pattern. Dilution does not change the sign of that ratio, and a blend of the two may pass the acid assay while carrying more neutral activity than the label allows. Run both assays on one sample, with the same substrate lot and detection. ## What diffraction and infrared can and cannot say X-ray diffraction is not the right identity method for an enzyme. A dried protein powder is amorphous; the scan shows a broad halo and no sharp reflections. The halo may help spot a crystalline carrier or a mineral contaminant, but it does not identify the protein or measure activity. Infrared spectroscopy does better: the amide bands show that the sample is protein, and their shape carries some secondary-structure information. It still does not say which enzyme is present. That is why the catalog identification entry combines IR with the activity assay. Gel electrophoresis provides the missing comparison: run the lot beside a reference and read the band pattern, the main protease band and any extra bands. ## Routes that can satisfy a weak test Adulteration routes and the test that exposes each | Route | What passes | What detects it | Bulking with a carrier | The blend still reaches the declared U/g | Carrier statement, mass balance, protein and specific activity | Neutral protease substituted | A general protease assay shows activity | pH 3 against pH 7, protein pattern, strain record | Activity destroyed by heat | Protein and colour remain | Both activity and specific activity drop | Free amino acids added | Folin colour reads high | Reagent blank and sample clean-up | Carrier changed without notice | Activity remains in specification | Carrier identity and composition statement | Different production strain | The generic name still applies | Strain declaration, origin record and protein pattern The free amino acid route exploits the detection chemistry. Folin-Ciocalteu reacts with tyrosine, tryptophan and reducing substances, so a spiked sample can read high without more enzyme; a blank and a clean-up remove the illusion. A silent carrier change is less dramatic but just as real: the activity stays in specification while the powder's flow, dust and label declaration change. ## A specification that can be checked - “Acid protease preparation, CAS 9025-49-4, ≥100,000 U/g; organism and strain declared.” - “The U defined by the Folin-Ciocalteu assay at the stated acid pH; substrate, temperature, time and standard on the COA.” - “Activity at pH 3 and pH 7 on one sample, or a full pH profile.” - “Protein and specific activity, with the method named.” - “As-is result; loss on drying ≤8.0%.” - “IR compared with the reference; particle size ≥95% through 40 mesh.” - “Carrier declared; no undeclared diluent or second protease.” The carrier line is not optional. A dilution is legitimate when the carrier and the lower activity are both in the specification; it is not legitimate when the original U/g label is kept. ## Five questions before qualification - Which organism and strain were used, and where is the record held? - What is the definition of one U here — substrate, acid pH, temperature, time, detection and standard? - What are the activity, protein and specific activity of this lot? - What activity do you measure at pH 3 and at pH 7 on the same sample? - What carrier or second enzyme is present, and where is it declared? Answers in writing to all five give a buyer a file to audit. An answer to the third alone gives a number that is easy to issue and hard to check. The product page lists the catalog values; the COA page shows where each figure belongs; the neutral protease page gives the other pH window; the alkaline protease page gives the third; the methods index covers the assay families; and the quality page describes release. ### 01 What the COA for catalase actually contains URL: https://nutrition.rainwoodbio.com/products/enzymes/catalase/coa/ Reviewed: 2026-11-19 For a catalase lot the certificate reports activity in units per gram, the conditions that define the unit, identity by activity and IR, loss on drying, heavy metals, microbiology and particle size. The activity line is the one that needs the most context: a U/g figure without the temperature, the pH and the starting peroxide concentration cannot be repeated by another laboratory. The limits below describe the catalog grade; the lot certificate is what proves a specific pack. In one lineA catalase figure is a rate, not a concentration: the unit, the starting peroxide concentration and the pH have to travel with the number. ## The certificate as a test report The table is a set of questions and answers: appearance, catalytic activity, water content, contaminants and the mesh. A “conforms” with no number behind it is a conclusion, not evidence. On the activity line the method and its conditions are part of the evidence, because the value is a rate. Catalog release specification · catalase | Parameter | Method | Release limit | Appearance | Visual | White to off-white, free-flowing powder | Catalase activity | UV assay at 240 nm, hydrogen-peroxide decomposition | ≥10,000 U/g | Identification | Activity assay and IR | Conforms to the reference | Loss on drying | Gravimetric | ≤8.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh CAS 9001-05-2 identifies the enzyme, not the preparation in the drum. The certificate should also name the production organism, the carrier or granulation aid and the lot, because those three decide what was actually assayed. ## What the U/g figure is based on One unit is the amount of enzyme that decomposes one micromole of hydrogen peroxide per minute at pH 7.0 and 25 °C, followed as the fall in absorbance at 240 nm. That definition is a method, and each part of it moves the result. A rate measured at 30 °C is higher than the same powder at 25 °C; a starting concentration of 50 mM peroxide gives a different rate from 10 mM, because catalase is inhibited by its own substrate at higher concentrations. The figure is normally reported per gram of powder as sold, and moisture is part of that mass. A lot released at 10,000 U/g with 8.0% loss on drying holds about 10,870 U/g on a dry basis; the two numbers describe one powder, and a buyer comparing a dry-basis figure with an as-is figure is comparing different denominators. Ask which basis the certificate uses and keep it beside the result. Specific activity, in U per milligram of protein, is a separate line. It describes how much of the powder is active enzyme rather than carrier or inactive protein. It is a useful consistency check across lots, not an absolute purity statement, because the protein assay has its own standard. ## Release limit versus batch result A release limit is the line a lot must clear; a batch result is the number the laboratory obtained. They are different columns, and the method sits next to them. Filling the result column with the specification repeats the gate instead of reporting the measurement. What the result column should contain | Parameter | Release limit | Result column | Activity | ≥10,000 U/g | A measured U/g with the assay conditions and the moisture basis | Identification | Activity and IR conform | The activity result plus the IR comparison | Loss on drying | ≤8.0% | The percentage found in the lot | Heavy metals | Per element | A separate mg/kg figure for each metal | Microbiology | Counts and absence | Counts per gram plus the absence results Because the activity limit is one-sided, a lot at 10,400 U/g and a lot at 18,000 U/g both pass, and they behave differently where part of the activity is lost in processing. The measured value, not the tick, is the useful number. Ask for the assay's repeatability as well: a result close to the floor is a thin margin when the method varies by several per cent. ## What moves between batches The production organism, the fermentation medium, the harvest point and the recovery steps set the protein mixture that reaches the dryer. Standardisation with a food-grade carrier then fixes the activity per gram, so two lots can be made to the same U/g from concentrates that started at different strengths. That is normal practice, provided the carrier is declared and the activity is measured on the final powder. Drying and milling move the rest. A hotter dry can cost activity while the powder still assays inside the window; a mill that generates heat can do the same before the sieve is reached. Moisture moves the as-is figure without changing the enzyme. Colour is the least quantitative signal: a cream-to-tan shift can follow a longer dry or a different carrier while the activity still passes. Read the batch record before reading colour as a failure. A trend across lots is more informative than one result near an edge: activity drifting down, loss on drying climbing, or a new band on the protein pattern. The lot code should be traceable from the certificate to the pouch, the drum and the retain. ## When to order an outside test Four occasions justify an outside laboratory: a supplier that has not been used before, a first shipment into a regulated market, a contested assay, or a label figure that depends on the result. The panel can stay narrow: activity on the retained sample by the named method, protein by a stated method, loss on drying, ICP-MS metals, microbiology and a protein pattern against a reference. The laboratory must use the same temperature, pH, starting peroxide concentration and wavelength as the specification, or the exercise compares methods rather than powders. Ask what limit of detection sits behind each screen, and check the accreditation scope behind the activity method. “Not detected” says something about the method's sensitivity, not about the powder, unless the limit is stated. Traceability decides whether the test has any weight. The laboratory should receive the retained sample, and its report should quote the lot code. If a result is contested, hand the referee the retain, the supplier's certificate and the specification, and ask for the test that distinguishes inactive enzyme from a diluted powder. Repeating the same assay adds a number, not an answer. ## What to compare between suppliers Compare six rows: organism and CAS number; activity with the full unit definition; protein or specific activity; loss on drying and carrier; heavy metals and microbiology; pack, lot code and storage condition. Offers that match on U/g but not on assay conditions describe two different powders. Catalog values are listed on the catalase product page. The tests that separate catalase from a dilution or another enzyme are on the identity page; the unit definitions are compared on the catalase and SOD comparison page; the methods themselves are described in the analytical methods library; the release workflow is on the quality page. ### 02 Catalase grades: activity, source and what carries it URL: https://nutrition.rainwoodbio.com/products/enzymes/catalase/grades/ Reviewed: 2026-11-19 Catalase is sold by activity per gram, by source and in the physical form the dosage step can handle. The catalog grade is a white to off-white powder at ≥10,000 U/g by the UV hydrogen-peroxide assay; granulated and diluted versions change the flow, the bulk and the weigh-up, not the reaction the enzyme catalyses. The choice starts with the units a serving needs and the mass the dosage form can carry. In one lineA catalase grade is an activity plus whatever carries it, so the U/g figure and its assay conditions matter more than the word on the label. ## What a grade actually fixes An enzyme grade is an activity figure plus the material that carries it, plus the source. “Catalase powder” is not a specification: 10,000 U/g and 40,000 U/g are both powders, and a fourfold dilution of the stronger one is not a different enzyme. Activity per gram is not purity. Protein content and specific activity describe how much of the powder is active enzyme, and a carrier-diluted grade can show a normal specific activity while carrying half the enzyme per gram. The source is part of the grade. Fungal catalase, typically from an Aspergillus species, and catalase from bovine liver are different proteins with different molecular weights and different pH and temperature behaviour. They also sit differently on a label and in a regulatory file, so a switch between them is a new ingredient, not a new lot. The production organism and the carrier should be named in the specification before the first order. ## The catalog grade and its versions Catalase grades and the changes each one makes | Attribute | Catalog powder | Granulated | Diluted on carrier | Activity | ≥10,000 U/g | Set per order; the binder adds mass | Lower U/g, set per order | Particle size | ≥95% through 40 mesh | Coarser, fixed by the granulation | Follows the base powder | Flow and dust | Free-flowing, some fines | Better flow, less dust | Depends on the carrier | Mass for 10,000 U | 1 g | 1 g if the activity is unchanged | 2 g at half the catalog activity | Added material | None declared | Binder or granulation aid | Carrier named on the label | Typical fit | Capsules, tablets, blends | High-speed filling and blends | Low-dose capsules and premixes The last row is a starting point, not a rule. A granulated powder is still a powder; it is the particle build that changed. A dilution is a different activity per gram and a different weigh-up, and the carrier becomes a declarable ingredient. ## Powder, granule and solution behaviour The catalog powder is white to off-white and free-flowing at 40 mesh. It dissolves in water to a clear to slightly turbid solution, which is the form a stick pack or a liquid premix will use. The fine fraction makes dust and static, so a containment step matters at the weighing bench; granulation reduces both and improves flow on a high-speed filler, at the cost of a binder and a slightly slower dissolution. Carrier dilution raises the bulk volume per unit of activity. A formulator who fills a fixed capsule weight and switches to a diluted grade will lose activity per capsule unless the fill weight changes. The carrier also brings its own moisture, particle size and label name, and a lactose or maltodextrin carrier is not an inert detail in an allergen or sugar declaration. Particle size and bulk density should be agreed for the blend, because a fine enzyme and a coarse excipient separate in a tumble blender. Moisture is capped at ≤8.0% on the catalog sheet. That limit protects activity during storage more than it protects flow, and a powder held above it loses units faster. ## Dose arithmetic before the label The arithmetic is simple and easy to get wrong. At 10,000 U/g, a 500 mg capsule fill holds 5,000 U, and a 10,000 U serving needs 1 g of powder. At half the catalog activity the same serving weighs 2 g, which may no longer fit the capsule. An 800 mg tablet at 10,000 U/g carries 8,000 U before any granulation aid is counted. These are arithmetic examples, not intake recommendations. If the stability file shows activity loss over the declared shelf life, the formulator may add an overage so that the label figure holds at the end of the period. That is a stability and labelling decision, and it does not repair a grade that is wrong for the fill weight. A higher-activity concentrate reduces the mass per serving; a dilution increases it and adds carrier to the label. Both are legitimate, but the label, the fill weight and the specification have to be rebuilt together. ## What to write into the specification - “Catalase (EC 1.11.1.6), CAS 9001-05-2; production organism named.” - “Activity ≥10,000 U/g by the UV hydrogen-peroxide assay, with the unit definition, pH, temperature and starting peroxide concentration.” - “Identification by activity assay and IR; report both.” - “Loss on drying ≤8.0%; particle size ≥95% through 40 mesh.” - “Carrier, granulation aid or diluent declared; state explicitly when none is used.” - “Heavy metals and microbiology as listed; storage condition and retest period on the specification.” - “Source organism, carrier and granulation fixed under change control.” A grade that is not written this way is a description, and a description cannot be released against. The catalase product page carries the catalog values; the COA page shows how activity is reported; the catalase and SOD comparison explains why a U/g from another enzyme is not a substitute; the stability page covers the loss that drives an overage. ## When a version is the wrong choice A dilution is the wrong choice when the dosage form cannot carry the extra mass, when the label declares a fixed activity per serving, or when the customer's release method was written around a concentrate. Granulation is the wrong choice when the application needs fast dissolution from a fine powder, as a stick pack usually does. A source switch is the wrong choice whenever the label, the allergen file or the destination market names the original source; matching U/g does not make the two preparations interchangeable. ### 02.1 Catalase vs superoxide dismutase: two antioxidant enzymes, two units URL: https://nutrition.rainwoodbio.com/products/enzymes/catalase/grades/catalase-vs-superoxide-dismutase/ Reviewed: 2026-11-19 Catalase and superoxide dismutase are both enzymes that act on reactive oxygen species, but on different molecules. SOD converts superoxide into hydrogen peroxide and oxygen; catalase then decomposes that hydrogen peroxide into water and oxygen. Their activity units come from different assays and cannot be converted into one another, so a blend of the two is a formulation with two specifications, not a stronger version of either. In one lineSOD makes hydrogen peroxide and catalase removes it: two substrates, two assays and two units that cannot be exchanged. ## Two reactions in sequence, not one reaction twice Superoxide dismutase catalyses the dismutation of the superoxide radical: two superoxide molecules and two protons give one hydrogen peroxide molecule and one oxygen molecule. Catalase catalyses a different step: two hydrogen peroxide molecules give two water molecules and one oxygen molecule. The two reactions connect, because SOD produces the substrate that catalase removes, but neither enzyme performs the other's reaction. Catalase does not act on superoxide, and SOD does not remove hydrogen peroxide. The two reactions and their enzymes | Enzyme | Substrate | Products | EC number | Superoxide dismutase | Superoxide (O2•−) | Hydrogen peroxide and oxygen | 1.15.1.1 | Catalase | Hydrogen peroxide (H2O2) | Water and oxygen | 1.11.1.6 Catalase is a heme enzyme, usually a tetramer built from four subunits of roughly 60 kDa, and the heme is where the peroxide is split. SOD is a family rather than one protein: the copper-zinc, manganese and iron forms share the reaction but not the sequence or the metal at the active site. The commercial SOD is one defined protein from one source, and the metal at its active site is part of its identity. The phrase “antioxidant enzyme” describes the chemistry in the assay; it is not a claim about a finished product. ## The units are not interchangeable A catalase unit is a rate: one micromole of hydrogen peroxide decomposed per minute at pH 7.0 and 25 °C, followed at 240 nm, with a stated starting peroxide concentration. One unit is about 16.67 nkat. A superoxide dismutase unit is a relative inhibition: the amount of enzyme that inhibits the reduction of a tetrazolium dye such as NBT by 50% in the xanthine and xanthine oxidase system, under stated conditions. The original format used cytochrome c rather than NBT, and the two formats do not give the same number for the same sample. The SOD unit therefore depends on the indicator, its concentration, the pH, the temperature and the amount of xanthine oxidase used to generate superoxide. The catalase unit depends on the starting peroxide concentration, because the enzyme is inhibited by its own substrate at higher concentrations. Ten thousand catalase units per gram and ten thousand SOD units per gram are two unrelated quantities. No conversion factor exists, and a “total antioxidant units” figure that adds the two is arithmetic without a method. The same rule applies across the enzyme range: a lysozyme unit is a turbidimetric drop in a bacterial suspension, and a protease unit is a rate on a protein substrate. Every one of those numbers is defined by its assay. The lysozyme page makes the same point for a third enzyme, and the SOD product page carries the values for that material. ## Two assays with different failure modes The catalase assay is direct: the sample is diluted in buffer at pH 7.0 and the fall in absorbance at 240 nm is followed as the peroxide disappears. The sample must be clear, because turbidity adds apparent absorbance, and a blank corrects for the powder's own colour. The rate must be read over a window where the decrease is linear; a high starting concentration can slow the enzyme and bend the curve. The SOD assay is indirect. Xanthine oxidase generates superoxide, superoxide reduces NBT to a coloured formazan, and SOD competes for the superoxide and lowers the colour. The laboratory builds a standard curve and defines one unit as the amount giving 50% inhibition. The readout is a difference between two rates, so coloured extracts, reducing agents and turbidity interfere more than they would in a direct assay. A sample that scavenges the dye chemically can look like SOD without being SOD. This is why a chemical antioxidant assay is not a substitute for either enzyme method. An ORAC or DPPH result measures radical scavenging in a defined chemical system; it does not measure catalase activity or SOD activity, and it cannot be converted into units of either. The analytical methods library sets out how these assays differ, and the release logic is described on the quality page. ## What a blend does and does not add A blend of catalase and superoxide dismutase is a formulation. Each component needs its own activity, its own unit definition and its own assay, and the ratio between them is part of the specification. A certificate that gives one combined “enzyme activity” for the blend has not specified either component. The ratio should be measured on the finished blend, not calculated from the weigh-up, because each enzyme can lose activity at a different rate during blending and storage. The blend also inherits the weaker conditions of its components. The two enzymes have their own pH and temperature profiles, and a blend that is held at the optimum of one may be outside the working range of the other. If a protease is part of the same multi-enzyme blend, it can digest both. An overage applied to the blend as a whole does not protect each component in proportion, so each activity needs its own stability data. ## Naming both enzymes, and the units beside them The label should name each enzyme separately, with the source where the destination requires it, and should state the activity in a unit that the specification defines. Catalase is CAS 9001-05-2 and SOD is CAS 9054-89-1; the EC numbers belong in the specification. A proprietary blend that hides the individual activities leaves the buyer unable to verify either one, and a ratio that is not declared cannot be checked. “Antioxidant” on a label is a claim question, not a chemistry question. The enzyme names describe what the preparation does in an assay; whether the finished product may carry a claim, and in what wording, is decided by the destination rules and the buyer's regulatory review. No disease-related claim follows from an activity figure. The catalase grades page covers the single-enzyme specification; the catalase product page carries the catalog values. ## Choosing one, the other, or both Choose catalase when the target is hydrogen peroxide, and SOD when the target is superoxide. If a formula wants both reactions, specify both enzymes and assay both; do not use one as a substitute for the other on the strength of a unit number. Do not convert catalase units into SOD units, and do not use a chemical antioxidant result as evidence of either enzyme. A blend can be the right product, but only when the ratio, the two assays and the two stability files are part of the specification. ### 03 Catalase stability: heat, moisture and the pack URL: https://nutrition.rainwoodbio.com/products/enzymes/catalase/stability/ Reviewed: 2026-11-19 Catalase is a protein, and what decays on storage is activity rather than mass: heat, moisture, alkaline pH, proteases and repeated freezing remove units while the powder can still look unchanged. A sealed powder at release moisture holds its activity longer than any solution, and a dilute solution at room temperature is the fastest way to lose it. The retest period comes from data on the pack being bought, not from the certificate. In one lineThe activity is the shelf life: heat, moisture, alkaline pH and dilution remove units long before the powder looks different. ## The powder: moisture, heat and the pack The catalog sets loss on drying at ≤8.0%. That figure is a gate at release, not an allowance for storage. Once the pouch is open, the powder pulls moisture from the air, the measured loss on drying climbs and the units fall away; the powder can stay white and free-flowing while its activity is going. A heat-sealed foil pouch is a barrier only while it is intact. After the first opening, move the remainder into a smaller opaque container, or finish it inside the in-use period agreed for the material. Heat is the second driver, and it acts on the dry powder as well as on solutions. A warehouse at ambient temperature is not the same condition as a loading bay in summer, and a drum left in the sun can reach temperatures that cost activity at the surface. In the 25 kg drum the liner, not the board, is the moisture barrier: close it after sampling, mark the opening date on the label and keep the drum off a damp floor. Cold storage helps, with one practical rule: let the sealed pack equilibrate to room temperature before opening it. Otherwise condensation forms on the powder, and the water arrives exactly where the specification tried to keep it out. A desiccant absorbs what gets past the closure; it cannot stop the leak, so fix the seal first. ## The solution: dilute, warm and unprotected is the worst case Catalase dissolves in water to a clear to slightly turbid solution. In solution the enzyme is diluted, and catalase is a tetramer: at low concentration the subunits can dissociate and the activity falls, a loss that is not caused by heat and is not reversed by concentrating the sample afterwards. Albumin, glycerol or a higher ionic strength can slow that dissociation, but the practical answer is to keep the solution concentrated, cold and short-lived. Several common preservatives are the wrong choice for this enzyme. Azide and cyanide bind the heme iron and inhibit catalase, so a preservative screen has to include an activity check, not only a microbial one. Hydrogen peroxide is the substrate, but a large excess inhibits and eventually inactivates the enzyme, which is why both the assay and any process that uses peroxide need a defined concentration and contact time. Freeze-thaw cycles concentrate the protein and damage the tetramer; aliquot before freezing and thaw once. The solution pH should sit near neutral. Alkaline conditions and strongly acid conditions both cost activity, and the effect is faster at higher temperature. A clear solution in a warm room is not a stable hold, and a powder stability result does not describe it. ## What drives the loss Factors that move catalase activity during storage | Factor | What it does | Control | Heat | Unfolding and aggregation; activity falls | Cool store; control process heat | Moisture | Raises loss on drying and water activity; promotes aggregation | Sealed pouch; dry store; desiccant | pH | Activity is highest near neutral; alkaline solutions lose units | Buffer near neutral; check the matrix | Peroxide | Excess substrate inhibits and inactivates the enzyme | Define the concentration and contact time | Freeze-thaw | Concentration and ice damage the tetramer | Aliquot; freeze once | Proteases and microbes | Cleavage of the protein; growth in a wet powder or solution | Micro limits; compatible preservative Heat and moisture rarely act alone: a warm, damp store multiplies the two, and a dilute alkaline solution adds pH and dilution to the same test. The question that matters is how many units survive in this pack, under this condition, for this long. ## A stability protocol for the ingredient The protocol should fix the pack, the condition, the time points and the panel of tests. A common design keeps one lot at 25 °C/60% relative humidity as the long-term arm, a second at 30 °C/65% for intermediate coverage and a third at 40 °C/75% as the accelerated arm. If the process includes a solution hold or a freeze-thaw, add an arm for each; a dry incubator will never reveal those failures. Activity is the primary endpoint, and it has to be run with the release method and the same conditions. Loss on drying, appearance, IR identity and microbiology belong at each point too. The report should give the measured values and the assay's repeatability, not a final verdict, and it should name the pack and the production family. Data from a different pack does not support the pack in the quotation. ## The finished formula changes the answer Capsules and tablets keep water activity low, yet the excipients and the shell still hold moisture, and a wet granulation brings water and heat together. Measure activity after compression as well as after storage, not only on the bulk powder. A blend adds segregation when particle sizes differ, and a protease in the same blend can digest catalase on the shelf. A stick pack lives or dies by its seal: a pinhole is a failure, so inspect the strip as well as the powder inside it. In a liquid, pH, preservative, heat and time act together. Bulk powder data is the starting point, not the answer, and any overage is a formulation and labelling choice. An overage does not rescue a pack that leaks moisture. ## How the shelf life is set Catalase has no universal shelf-life figure. The retest period is written against a named pack and storage condition, and the stability file is the evidence behind it. A number quoted without the pack, the condition and the panel cannot be checked, and a bulk figure does not transfer to a repacked container. At the end of the period, re-assay the retained sample before extending use. Standard packs are listed on the catalase hub; the COA page sets out the release tests, and the MOQ page the pack and lead time. The methods library describes the activity assay, and the quality page covers the release file. ### 04 Catalase: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/enzymes/catalase/moq/ Reviewed: 2026-11-19 Catalase is supplied from a 1 kg foil pouch, and that pouch is the minimum order; the bulk pack is a 25 kg fiber drum. Standard dispatch is 1–7 days. A firm quotation names the production organism, the activity unit definition, the pack, the destination and the documents. In one lineA kilogram is the practical minimum: the trial, the retained sample and the referee activity test all draw from one traceable lot. ## Why the minimum is a kilogram An activity assay consumes material, and a qualification usually needs more than one. The 1 kg pouch leaves room for a bench trial, the customer's own assay and a sealed retain, all carrying the same lot code. A smaller quantity would be split from a bigger lot and repacked, and the certificate would no longer describe the pack the laboratory opened. The 25 kg fiber drum cuts the number of packs to handle and log, but it also fixes a larger quantity in inventory. Catalase is a protein, and its units decline with time; a drum bought for a year of production can outlive its peak activity. Match the pack to the campaign and the retest period, not to a volume target. ## Packs and formats Catalase packs and what each one changes | Pack | Net weight | Where it fits | Handling note | Foil pouch | 1 kg | Trial, retain, small batch | Heat-sealed; reseal or transfer after opening | Fiber drum | 25 kg | Production | Liner is the barrier; log the opening date | Granulated powder | On request | Flow and dust control | Binder declared; particle profile differs | Diluted on carrier | On request | Lower activity per gram | Carrier becomes a label ingredient The catalog material is milled to pass 40 mesh, with ≥95% through the sieve. Granulation and dilution are separate specifications, not packing options: a granule carries a binder, and a dilution carries a carrier that appears on the label. If the filler needs a coarser or less dusty powder, raise it before the quotation, because the change can add a process step to the lead time. The storage condition belongs in the specification as well; a cold-chain pack is quoted separately. ## Dispatch and transit Dispatch normally takes 1–7 days from order confirmation. Picking, document preparation and handover to the carrier fall inside that window; freight transit, customs and the customer's own release do not. A special granulation, a dilution or a non-standard pack is scheduled separately, and the quotation should show it as its own line. Ask for the dispatch date as well as the lead time, because a parcel and a pallet do not leave on the same schedule. The Incoterm decides who books the freight and who clears the entry, and the documents should travel in the same consignment as the powder, not follow it. ## Six details a quotation must carry - Identity and source. Catalase, EC 1.11.1.6, CAS 9001-05-2, production organism and carrier. - Activity. The U/g figure and the assay conditions that give it meaning. - Pack and quantity. Pouch, drum, granulated or diluted. - Delivery. Destination and Incoterm. - Paperwork. COA, specification, SDS and the declarations the destination requires. - Use and market. What the material goes into and where it is sold. A quotation that leaves out the organism or the assay conditions cannot be compared with another offer, because the U/g numbers may not share a scale. Commercial terms are not published here; they are set out in the quotation. ## The sample is a qualification lot The first pouch is a qualification lot, not a demonstration. Run the activity assay in your own laboratory, check moisture and microbiology, and keep a sealed retain. Sample, certificate and quotation should share one lot code; without that link the test says nothing about the production order. Budget the material the tests will consume, and keep the retain out of it. A bench trial that needs less than a kilogram can be arranged, but a split pack is a repack and should be documented as one. Do not assume the production drum will come from the sample lot. ## What the quality agreement settles The quotation carries the commercial terms; the quality agreement should carry the rest. Write the specification revision, the per-lot COA, the retained sample, the retest period and the change-control route into that agreement before the first production order. The production organism, carrier and granulation belong there too, because changing any of them produces a different material even at the same U/g. If a lot fails, the route is the retained sample and a joint re-test at a laboratory both sides accept; agree in advance who pays for the referee work. A photograph of the powder is not evidence, and a replacement lot is not a root-cause answer. Catalog values are on the catalase product page. The COA page lists the release tests; the stability page explains why a large drum can outlast its activity; the compliance page covers the market file; the MOQ glossary entry defines the term; the logistics page covers shipping and documents. ### 05 The regulatory file for catalase URL: https://nutrition.rainwoodbio.com/products/enzymes/catalase/compliance/ Reviewed: 2026-11-19 Catalase is an enzyme preparation, not a single chemical, so the regulatory file starts with what was fermented: the production organism, the carrier and the activity definition. It then adds the destination route, the intended use and the finished-product dose. The buyer's regulatory team confirms whether the preparation is permitted for that use and market; this page lists the frameworks, limits and documents that belong in the file. In one lineThe specification describes the enzyme preparation; the regulatory file shows the route, the carrier and the label for the destination. ## What the file has to answer A complete file answers four questions. What is the material, and which specification version is being bought? Which lot is being released, and what does its certificate report? Which route and label rules apply to the finished product in the destination? And what changes if the source organism, the carrier or the process changes? The certificate answers the lot question, the technical data sheet answers the specification question, and the safety data sheet answers the handling question. None of them answers the route question alone. One distinction runs through the whole file: an enzyme used as a processing aid and an enzyme declared as an ingredient are different regulatory objects, even when the powder in the drum is identical. The intended use should be written down before the documents are assembled, because it decides which statements matter and how the label reads. The file should also hold the allergen, GMO, origin and residual-solvent statements, plus the carrier declaration, each with a version number. ## European Union Food enzymes in the EU sit under Regulation (EC) No 1332/2008. Only food enzymes included in the Union list may be placed on the market as such and used in foods, and the entry is specific to the enzyme and its source and conditions of use. The buyer's regulatory team confirms that the entry covers the production organism and the intended use, and checks the current consolidated text rather than a summary. General food law, labelling and contaminant rules apply alongside: Regulation (EC) No 178/2002, Regulation (EU) No 1169/2011, Directive 2002/46/EC for food supplements and Regulation (EU) 2023/915 for contaminants. Great Britain and Northern Ireland are checked separately. The GB file uses the current GB rules and register; Northern Ireland follows the EU framework. The buyer confirms which applies to the destination. A processing aid is not declared in the ingredient list in the same way as an ingredient, so the label consequence depends on the use, not only on the specification. ## United States The US file is built around the exact substance and its intended use. A dietary ingredient in a supplement needs a lawful basis — a GRAS conclusion, a documented history of use, or an NDI notification — while a food enzyme used as a processing aid follows a different route. The supplier should be able to name the basis it relies on and point to the supporting document; the buyer confirms that the basis covers the finished product and the claim. Supplement manufacturing sits under the cGMP rules in 21 CFR 111, and the Supplement Facts panel names the dietary ingredient and its source where required. The label and the claim are reviewed separately from the certificate. A specification can be correct and a label still wrong for the market, and the reverse is also true. ## Contaminants and the finished-product dose The contaminant panel is a finished-product calculation, not only a drum result. The table below is the catalog gate; the destination text and the daily dose decide the final limit. Catalog limits and what the regulatory file adds | Parameter | Catalog limit | What the file adds | Lead | ≤3 mg/kg | Lot result, method and finished-product calculation | Arsenic | ≤2 mg/kg | Lot result and the agreed limit | Cadmium | ≤1 mg/kg | Lot result and any category exception | Mercury | ≤0.1 mg/kg | Lot result and method | Loss on drying | ≤8.0% | Measured result and the activity basis | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Lot counts and absence statement | Carrier | Declared | Identity and food-grade status of the carrier The carrier is part of the regulatory object, not a packing detail. A lactose carrier brings an allergen declaration; a maltodextrin carrier brings a carbohydrate that may matter to the label. If a processing aid or a solvent is used, the file should say so and the residue statement should follow. Convert the lot result to the daily dose before comparing it with a finished-product limit; a compliant drum can still produce a non-compliant supplement at a high dose. ## Claims and the activity figure An activity figure is a measurement of the preparation, not a clinical effect. No disease-related claim follows from a catalase unit, and the enzyme should not be presented as preventing, alleviating or repairing a condition. In the EU, nutrition and health claims sit under Regulation (EC) No 1924/2006 and the authorised list in Regulation (EU) No 432/2012; the word “antioxidant” is a claim with conditions, and an enzyme activity is not automatically an authorised claim. In the US, structure or function statements for supplements are made with the required disclaimer and must not be disease claims. The finished product's claim review belongs to the brand and its regulatory reviewer. ## The document set Documents in a catalase regulatory file | Document | What it answers | Specification, versioned | The activity definition, limits and form being bought | COA per lot | What the lot measured, by which method | Technical data sheet | Form, solubility, storage and handling | Safety data sheet | Hazards and safe handling | Allergen and GMO statements | The declarations the destination requires | Origin statement | Where the lot was manufactured | Carrier and processing-aid declaration | What else is in the powder | Activity method description | The unit definition and assay conditions A document list with version numbers is more useful than a folder of undated PDFs. When a statement is not available for the lot, name the gap before the order, not at the port. ## Checklist before the first order - Specification version, CAS 9001-05-2, EC 1.11.1.6 and the production organism are named. - COA, TDS, SDS, allergen, GMO, origin and carrier declarations are on file. - The activity unit definition travels with the specification. - The contaminant results are converted to the finished-product dose. - The route, the label and the claim have been reviewed for the destination. - Source organism, carrier and pack are under change control. The product page carries the catalog values; the catalase hub also links the technical pages. The COA page explains the lot certificate; the identity page covers the analytical evidence; the EU regulatory notes give the framework references; the quality page describes the release file. ### 06 How we prove a catalase lot is catalase URL: https://nutrition.rainwoodbio.com/products/enzymes/catalase/identity/ Reviewed: 2026-11-19 A catalase lot is identified by what it does and what it is made of, not by a single activity figure. The activity assay under stated conditions proves the catalytic reaction; IR and the protein pattern support the protein; the declared source organism and the carrier explain the rest of the powder. The certificate should let a reader reach those conclusions from the data rather than from a “conforms” line. In one lineIdentity is three agreements: activity for the reaction, IR and protein for the preparation, and the source with the carrier for everything else in the powder. ## The identity layers A certificate can name the right material and still fail to prove it. The layers below are separate questions, and each one needs its own evidence. A supplier who answers only the first has described the paperwork, not the powder. Four layers of catalase identity | Layer | Question | Test | What it proves | Document | Is the enzyme and source named? | Name, CAS 9001-05-2, EC 1.11.1.6, production organism | Paperwork only | Activity | Does it decompose peroxide? | UV assay at 240 nm under stated conditions | The reaction, not the protein | Protein | Is the protein consistent with catalase? | IR, SDS-PAGE, protein assay | The preparation | Mass balance | What else is in the powder? | Loss on drying, carrier, ash, activity per gram | Dilution or an inert fraction The activity layer is necessary and not sufficient. A heme protein with catalase-like activity can move the same absorbance at 240 nm, and a peroxidase can consume peroxide in the presence of a donor. That is why the activity result is read with the protein evidence, not instead of it. ## Specific activity and the dilution ratio Specific activity is the activity divided by the protein content, usually written in units per milligram of protein. It answers a different question from units per gram: U/g describes the powder as sold, while U/mg protein describes how much of the protein is active enzyme. A crude preparation and a purified one can be standardized to the same U/g and still differ in specific activity, and that difference matters when the dosage form is small. The pair also prevents a common misreading. A simple dilution with a protein-free carrier lowers U/g and protein per gram together, so specific activity stays roughly the same; specific activity is not a dilution detector. What detects an undeclared carrier is the mass balance: the declared activity, the measured activity, the loss on drying and the carrier or ash fraction have to add up to the powder in the pack. A concentrate standardized from 20,000 U/g to 10,000 U/g with a declared carrier is normal; the same drop with no declared carrier is a specification gap. A falling specific activity across lots, at a stable U/g, points to more inactive protein or a change in the recovery step. A rising one can point to a purer preparation or to a protein assay that is under-reading. Either way, the ratio is a trend to review, not a single result to accept. ## X-ray diffraction: what it can and cannot show Catalase is a protein, and a protein powder is amorphous. An X-ray diffraction scan of the catalog powder should show a broad halo, not a set of sharp reflections, and that halo cannot identify catalase. XRD is not the identity test for this material, and a certificate that reports “XRD conforms” without a pattern or a reference has added very little. The technique is still useful for the question beside identity: what else is crystalline in the powder? A sharp pattern can reveal a crystalline carrier or diluent — lactose monohydrate, sodium chloride, a crystalline sugar — or an inorganic filler that the specification did not declare. It can also compare a lot with a reference preparation that contains the same carrier. Ask for the reference pattern and the detection limit, because a crystalline phase below the method's limit will not appear. ## What adulteration looks like Common catalase substitutions and the signals | Adulterant | What it does | Signal | Test | Carrier dilution | Lowers U/g and adds mass | Declared or undeclared carrier; sugar or ash | Activity, loss on drying, HPLC or IR | Heat-inactivated enzyme | Protein remains, units fall | Low U/g with normal protein; low specific activity | Activity plus protein | Another enzyme | Wrong activity and label | No catalase activity or a mixed protein pattern | Catalase assay, SDS-PAGE, specific assays | Heme protein | Peroxidase or catalase-like activity | Peroxidase signal without matching units | Peroxidase assay, spectrum, SDS-PAGE | Undeclared source | Different protein and label | Pattern does not match the declared organism | SDS-PAGE, peptide mapping, audit The activity assay is a functional test, and function can be mimicked by a different protein. The protein pattern is the layer that separates a genuine catalase preparation from a look-alike, and the declared source is the layer that separates one catalase from another. Colour is the weakest signal: white to off-white covers a wide range, and a carrier or a drying change can move it without moving the identity. ## How to write identity into the specification - “Catalase (EC 1.11.1.6), CAS 9001-05-2; production organism named.” - “Activity ≥10,000 U/g by the UV hydrogen-peroxide assay, with the pH, temperature and starting peroxide concentration.” - “Identification by activity assay and IR; report both results.” - “Protein by a stated method; specific activity reported where identity is disputed.” - “Loss on drying ≤8.0%; carrier declared; particle size ≥95% through 40 mesh.” - “Protein pattern against a reference lot on request; lot code traceable to the pack.” ## Five questions for the supplier - Which organism produced this lot, and what carrier or granulation aid is in the powder? - What is the exact unit definition, with the pH, temperature and starting peroxide concentration? - Can you provide the IR spectrum and a protein pattern against a reference lot? - What is the specific activity in U per milligram of protein, and what explains the level? - If the lot is disputed, will you accept a joint re-test on the retained sample? Five direct answers amount to an identity file; a single activity percentage does not. The product hub carries the catalog values; the COA page shows where each figure sits on the certificate; the grades page explains what a carrier and a source change do to the material; the catalase and SOD comparison covers the unit question; the FTIR method note explains the spectral comparison; the quality page describes how the file is released. ### 01 What the COA for lysozyme hydrochloride actually contains URL: https://nutrition.rainwoodbio.com/products/enzymes/lysozyme/coa/ Reviewed: 2026-11-19 The certificate for a lysozyme hydrochloride lot reports appearance, identification, activity in U/mg, loss on drying, particle size, heavy metals and microbiology. The activity line is a kinetic measurement, so the certificate has to carry the unit definition, the Micrococcus substrate and the assay conditions next to the figure. The limits below are the catalog specification; the batch COA confirms one sealed pack of lysozyme hydrochloride powder. In one lineAn activity of 20,000 U/mg means nothing until the certificate states the unit definition, the Micrococcus substrate and the assay conditions beside it. ## The certificate as a test report A certificate can be audited only when every row answers three questions: what was measured, which method produced the number, and which release limit the lot was judged against. For the activity row there is a fourth, the conditions under which the rate was measured. A row that says “conforms” without a method and a result is a conclusion, not evidence. Catalog release specification · lysozyme hydrochloride | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | Activity assay and IR conform | Conforms to the reference | Activity | Turbidimetric assay on a Micrococcus substrate, reported in U/mg | ≥20,000 U/mg | Loss on drying | Gravimetric | ≤5.0% | Particle size | Sieve analysis | ≥95% through 40 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent CAS 9001-63-2 identifies the enzyme, not the pack in front of you. A specification should therefore also name the salt form, the source and the lot, because they define the preparation that was tested. The identification row is deliberately two tests: the activity assay shows that the powder lyses the substrate, and the infrared spectrum gives a second, independent line on the protein. ## What the U/mg figure measures One lysozyme unit is defined by a rate: the amount of enzyme that produces a decrease in absorbance at 450 nm of 0.001 per minute at pH 6.24 and 25 °C in a suspension of Micrococcus lysodeikticus. A different wavelength, cell concentration or path length gives a different number for the same powder, which is why the unit definition travels with the figure rather than sitting in a footnote. U/mg can mean per milligram of powder as sold or per milligram of protein. The catalog figure is activity per milligram of powder; specific activity, in U/mg protein, is the concentration check. Protein is read by ultraviolet absorbance with a maximum at 281 nm and a minimum at 252 nm, or by a colorimetric assay against a standard; state the method, because the two do not share a denominator. The salt form matters to the arithmetic. The hydrochloride is the commercial form and its mass includes chloride. A 20,000 U/mg figure on the hydrochloride and a 20,000 U/mg figure on a free-base preparation do not mean the same protein mass per gram. The EU additive specification for E 1105 sets lysozyme at not less than 950 mg/g on the anhydrous basis, a protein-content gate rather than an activity gate; a certificate that reports only U/mg has not shown it. ## Release limit versus batch result ≥20,000 U/mg is a floor. A result just above the floor and one far above it both pass, and the second carries more activity into a process that will consume part of it. The measured value is the useful number; the limit only says the powder passed. A result column that repeats the limit is not a result. Ask whether the figure describes release or the end of the declared shelf life. Lysozyme is a protein and its activity falls in storage, so a certificate without that statement compares a fresh powder with an aged one. The assay's relative standard deviation matters too: close to the floor, a wide spread turns a pass into a coin toss on retest. What the result column should contain | Parameter | Release limit | Result column | Activity | ≥20,000 U/mg | A measured U/mg figure, the method and the unit definition | Loss on drying | ≤5.0% | A measured percentage | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot | Particle size | ≥95% through 40 mesh | The measured percentage through the sieve ## What moves between batches The raw material is biological, so the starting activity varies before processing begins. Extraction, clarification, salt precipitation, ultrafiltration, drying and milling each move the final figure: purification raises activity per gram, drying sets the moisture, and milling sets the mesh. Chloride moves with the salt form, not the activity, so a chloride shift can point to a different salt rather than a different enzyme. Colour is the least quantitative line and often the most revealing. White to off-white is a wide window; a grey or brown shift can follow a hotter dry, a longer hold or a Maillard reaction with a reducing carrier while the activity still passes. Read the batch record before rejecting a lot on colour alone, and watch a trend across lots more closely than a single result near an edge. Method drift is the quiet one. A new substrate lot, a different cell suspension, a changed path length or a re-made standard makes two U/mg results incomparable even when both certificates use the same words. The lot code on the certificate should match the pouch, the drum and the retained sample. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a disputed result, or a label claim that rests on the activity figure. The panel can stay narrow: activity by the same turbidimetric method, protein, SDS-PAGE for the expected band (about 14.3 kDa for the hen egg white enzyme), chloride by ion chromatography, loss on drying, ICP-MS metals and microbiology. If the source is egg white and allergen labelling is at stake, an egg-protein ELISA adds a line. The referee has to run the same substrate and conditions as the specification, or the comparison measures methods rather than powders. Ask for the detection limit on each screen, and require the lot code on the sample and on the report. The sample tested should be the sample retained. ## What to compare between suppliers Put six lines side by side: enzyme name and salt form; CAS number; activity result with the unit definition; protein or specific activity; loss on drying and particle size; heavy metals, microbiology and the lot trace. Two quotations can agree on 20,000 U/mg and differ on all five of the others. The same reading applies to cellulase and amylase certificates, where the unit definition carries the same weight. The catalog specification sits on the lysozyme product page. The tests that separate a genuine lot from a diluted one are on the identity page; the laboratory vocabulary is in the analytical methods library; the release workflow behind the certificate is described on the quality page. ### 02 Lysozyme grades: activity, salt form and particle size URL: https://nutrition.rainwoodbio.com/products/enzymes/lysozyme/grades/ Reviewed: 2026-11-19 Lysozyme is supplied as a hydrochloride powder specified at ≥20,000 U/mg, with the salt form, the activity and the particle size making up the grade. A granulated form is available on request; a lower-activity dilution is a separate custom specification, not a packing variant. The salt question is larger than the other two and has its own page: lysozyme against lysozyme hydrochloride. In one lineA lysozyme grade is an activity figure plus a salt form and a particle size, and changing any one of the three changes the dose and the label. ## Why an enzyme has grades but no purity figure A crystalline additive can be sold at 98% or 99% because the assay compares the molecule with everything else in the drum; a lysozyme preparation cannot be described that way. The powder contains the enzyme, the remains of the extraction, and any carrier used to standardise the activity, so the useful description is a declared activity plus the identity of the salt, the source and the particles. That is why two suppliers can both offer “lysozyme” and mean different materials: one sells a hydrochloride concentrate at ≥20,000 U/mg, the other a diluted powder at a fraction of that figure, and the second carries several times the mass for the same number of units. Neither is wrong: they are different grades with different jobs and specifications. What a lysozyme grade fixes in a formula | Property | What it controls | Where it shows up | Activity (U/mg) | How many units a milligram delivers | Dose weight, label claim, overage | Salt form | Chloride content, mass and solution pH | Ingredient name, weigh-up, label | Carrier | What the activity is diluted on | Ingredient list, moisture, flow | Particle size | How the powder flows and dissolves | Blend uniformity, dust, mixing time | Physical form | Powder or granule | Dust control, dispersion rate | Source | Declared source and production stream | Identity file, allergen statement ## The grade options side by side The standard grade is a white to off-white 40 mesh powder at ≥20,000 U/mg, in the hydrochloride form. A granulated version is made on request. A preparation sold simply as lysozyme is a separate specification, not a packing variant of the standard grade. Lysozyme grade options and what changes when you switch | Option | Activity | Form | What changes in the formula | Standard hydrochloride powder | ≥20,000 U/mg | 40 mesh powder | Smallest dose weight; the catalog grade | Custom lower-activity dilution | Agreed in the specification | 40 mesh powder | Larger dose weight; the carrier becomes an ingredient | Granulated hydrochloride | Agreed in the specification | Granules | Less dust; slower dispersion; check the granulation loss | Free-base lysozyme | Separate specification | Powder | Different salt, mass, pH and label name The activity figure is comparable only when the unit is. A U/mg from one supplier and a unit tied to a different wavelength or cell charge from another are not the same measurement. The COA page sets out the elements the unit definition has to carry. ## Powder, mesh and dust The standard particle size is ≥95% through 40 mesh, a free-flowing powder that blends into a dry mix and dissolves readily in water. The hydrochloride gives a solution with an acidic pH: the EU additive specification for a 2% aqueous solution sets pH 3.0–3.6, which belongs in the handling notes and in any pH-sensitive formula. Fines are what make the powder dissolve quickly, and they are also what make it dust. Enzyme powders can be respiratory sensitisers, so dust is a handling question as much as a processing one: the safety data sheet carries the hazard statements, and the controls are local exhaust ventilation, closed transfer and the right mask. Granulation trades dispersion speed for dust control. A granule wets more slowly, so a stick pack that must disperse in seconds is usually built on powder, while a plant handling kilos a day may prefer granules to keep the air clean. Whichever form is chosen, the granulation step itself removes activity, and the after-step figure belongs in the specification. A granulated grade is not the same powder pressed into a different shape; it is a new lot with its own certificate. ## The arithmetic that decides the grade Units are weight multiplied by activity. For every 200,000 U a formula needs, a 20,000 U/mg powder contributes 10 mg and a 10,000 U/mg dilution contributes 20 mg. The units are identical; the mass, the carrier and the label entry are not. A twofold dilution doubles the powder weight and adds one part of carrier for every part of enzyme powder. Weighability usually settles the choice. A 10 mg charge is routine in a production batch and awkward in a 5 kg pilot, where the balance and the mixer struggle with a speck of powder. A dilution makes the same number of units weighable, while carrying the carrier through the whole formula and into the ingredient declaration. Two cautions sit beside the arithmetic. The label claim has to name the basis: activity at release or activity at the end of shelf life. And the salt form changes the mass per unit, so a switch between the free base and the hydrochloride needs a new weigh-up, a new specification and a new label, not a factor applied at the balance. ## How to write the grade into a specification A specification that cannot be tested is not a specification. Seven lines make this one testable: the enzyme name and salt form; the activity with its unit definition and assay reference; the protein or specific-activity figure; loss on drying at ≤5.0%; particle size at ≥95% through 40 mesh; the source and the allergen statement; and the form, powder or granule. Add the labelled basis and the storage statement. Write the activity as a one-sided figure (“not less than”) and keep the unit definition beside it, because a change of substrate, cell charge or assay conditions between lots makes two results incomparable even when both say U/mg. The catalog values are on the lysozyme product page; the checks that keep a diluted lot honest are on the identity page. ## When a dilution or a granule is the wrong choice If a custom dilution is on the table, three situations argue against it. A blend that is already close to its carrier limit gains nothing from more maltodextrin or glucose. A formula with a tight moisture budget gains nothing from a carrier that holds water. A label that must stay compact gains nothing from an entry that exists only to make the powder weighable. Granulation has its own limits. A drink mix that must disperse without stirring, or a dry blend that depends on fine particles for uniformity, can lose more than it gains from a granule. There is also a process reason: every extra carrier is another material that has to be dispersion-tested, declared and held in inventory, and a dilution that solves a weighing problem at pilot scale can be the wrong grade once the batch is large enough to weigh the concentrate accurately. The wider enzyme range follows the same logic, with different units: cellulase is chosen on CU/g and amylase on SKB/g, but in both cases the grade is an activity plus the material that carries it. ### 02.1 Lysozyme vs lysozyme hydrochloride: the salt, the activity and the label URL: https://nutrition.rainwoodbio.com/products/enzymes/lysozyme/grades/lysozyme-vs-lysozyme-hydrochloride/ Reviewed: 2026-11-19 Lysozyme is the enzyme; lysozyme hydrochloride is the same enzyme in its hydrochloride salt form, and the hydrochloride is the usual commercial form for food use. The two share the catalytic activity but differ in the counter-ion, the mass per unit of activity, the solution pH and the name that belongs on the label. The switch is a specification and labelling decision, not a unit conversion applied at the balance. In one lineLysozyme and lysozyme hydrochloride share the enzyme but not the salt, the mass or the label, and the activity figure has to be read with all three in view. ## One enzyme, two salt designations Hen egg white lysozyme, the common food-grade form, is a small basic protein of about 14.3 kDa. In the hydrochloride form, chloride is the counter-ion to the positively charged protein; in a preparation sold simply as lysozyme, chloride is not the declared counter-ion. The enzyme fold is the same, and the turbidimetric assay measures the same reaction, but the powder around the enzyme is not the same material. Lysozyme and lysozyme hydrochloride side by side | Property | Lysozyme | Lysozyme hydrochloride | Name | Lysozyme, muramidase | Lysozyme hydrochloride | CAS number | 9001-63-2 | 9066-59-5 in several registries | Source | Declared on the certificate | Declared on the certificate | Counter-ion | Chloride not the declared counter-ion | Chloride | Solution pH, 2% | Depends on the preparation | 3.0–3.6 in the EU additive specification | Solubility in water | Soluble | Readily soluble | Content gate | Specification-specific | Not less than 950 mg/g anhydrous for E 1105 | Label name | Lysozyme | Lysozyme hydrochloride The CAS numbers are a common source of confusion. 9001-63-2 identifies the enzyme, and it is the CAS number on the catalog page; the hydrochloride is listed separately in several registries. A purchase order that gives one CAS number and a different salt name has not specified a single material, and the certificate should carry both the enzyme name and the salt name. ## The activity figure and the salt Both forms are assayed by the same turbidimetric principle: a dilution of the powder is mixed with a Micrococcus lysodeikticus suspension, and the fall in absorbance at 450 nm is followed. One unit is defined as the amount that produces a decrease of 0.001 absorbance units per minute at pH 6.24 and 25 °C. The unit definition is the same across the two forms, but the number it produces is a property of the powder, not of the protein alone. U/mg can mean per milligram of powder as sold or per milligram of protein. The salt form changes the mass of the powder: the hydrochloride carries chloride, so a specification written on the hydrochloride is not numerically transferable to a free-base powder at the same protein content. A 20,000 U/mg figure on one form and a 20,000 U/mg figure on the other do not describe the same protein mass per gram. Divide by protein to get specific activity, and state the protein method beside it. The EU additive specification for E 1105 sets the lysozyme content at not less than 950 mg/g on the anhydrous basis, and JECFA's monograph uses the same 950 mg/g figure, expressed as lysozyme hydrochloride. That is a content gate, not an activity gate. A certificate that reports only U/mg has not shown the protein content, and a certificate that reports only mg/g has not shown what the powder does. The two figures belong together. ## What the label has to say In the European Union, the additive is listed as E 1105 lysozyme, authorised in ripened cheese at quantum satis under Regulation (EC) No 1333/2008. The additive specification's pH range for a 2% solution is consistent with the hydrochloride form, so the entry and the commercial salt are not in conflict. The entry is for cheese, not for a capsule: a food-supplement use needs its own route, which the buyer's regulatory team confirms. A supplement label should name the form that is in the powder. “Lysozyme hydrochloride” is more precise than “lysozyme” where the hydrochloride is the ingredient, and the ingredient list, the specification and the certificate should use the same name. Egg is a listed allergen in the EU and a major food allergen in the United States; where the ingredient is present, the label has to declare egg, subject to the specific rules and any derogation for the product. No disease-related claim is made for either form, and the activity figure is not a clinical result. The claim review sits with the brand's regulatory reviewer and is separate from the certificate. The label also has to state the activity in the form the destination requires, with the unit definition available in the specification. ## The market route follows the form and the use In the EU, three routes can apply to the same enzyme: the additive entry for ripened cheese, the food-enzyme framework of Regulation (EC) No 1332/2008, and the oenological practice for wine, where the OIV code sets a cumulative maximum of 500 mg/L. None of those routes authorises a supplement on its own. In the United States, egg white lysozyme appears in the FDA's food-substance inventory, and GRAS Notice 64 covers specific antimicrobial uses on casings and cooked meat and poultry; those uses do not establish every other use, and a dietary-ingredient route is confirmed separately. Great Britain checks its own register and labelling rules, while Northern Ireland follows the EU framework. The destination decides which applies, and the buyer's regulatory team confirms the route before the label is written. The compliance page lists the documents that belong in that file. ## What to write into the specification - “Lysozyme hydrochloride, enzyme name muramidase, CAS 9001-63-2 for the enzyme, source declared on the certificate.” - “Activity ≥20,000 U/mg by the turbidimetric Micrococcus assay, with the unit definition and conditions stated.” - “Protein and specific activity reported; chloride by ion chromatography where the hydrochloride is claimed.” - “If the EU E 1105 specification is the target, add the not-less-than-950 mg/g anhydrous content gate.” - “Loss on drying ≤5.0%; particle size ≥95% through 40 mesh.” - “Label name and egg allergen statement agreed with the destination before the order.” ## When to choose which Choose the hydrochloride for the commercial food and supplement route: it is the form with the established specification, the acidic solution pH that the EU additive monograph describes, and the solubility that suits a powder blend or a stick pack. This is the form we supply. Choose a preparation labelled simply as lysozyme only when the destination or the customer specification calls for it and the market file covers it. It is not a drop-in for the hydrochloride: the chloride figure changes, the mass per unit changes and the label name changes. A switch in either direction needs a written change control, a new specification and a label check, not only a new certificate. The product hub carries the catalog specification; the grades page places this comparison in the wider range; the COA page shows how the salt form is reported; the identity page gives the tests that separate the two; the methods library covers the assay vocabulary; and the quality page describes the release workflow. ### 03 Lysozyme stability: heat, moisture and the solution URL: https://nutrition.rainwoodbio.com/products/enzymes/lysozyme/stability/ Reviewed: 2026-11-19 Lysozyme hydrochloride is stable as a dry powder in a sealed pack, but it loses activity with heat, moisture and time in solution. The powder is not inert and not sterile: water raises the water activity and lets both chemical and microbial damage proceed, while heat denatures the protein. Shelf life is assigned from stability data for the exact pack and storage condition, not from the certificate. In one lineLysozyme is a protein, so heat and moisture remove activity long before the powder looks different, and the pack plus the process decide what is left at the end of shelf life. ## The powder: moisture, temperature and colour The catalog sets loss on drying at ≤5.0%. That limit is a release gate, not a storage allowance. Once the foil pouch is opened, the powder can pick up moisture from the air: the loss on drying rises, the powder cakes, and the as-is activity per gram falls as water takes the place of solids. A tight seal and a dry store are part of the specification in practice, even when they are not printed on the certificate. Heat is the second driver. Lysozyme is a globular protein of about 14.3 kDa, and its activity depends on the folded structure; sustained warmth above ambient accelerates unfolding and aggregation. A warehouse at ambient temperature is usually acceptable for a sealed pack, but a hot loading bay, a car boot or a greenhouse is not. Allow the pack to equilibrate before opening after cold storage, so that condensation does not form on the powder. Strong light and repeated freeze–thaw cycles are the less obvious exposures. Ultraviolet light can damage the protein, and a pouch that is opened and closed repeatedly gains moisture and loses activity with each cycle. The original light-resistant pack, kept closed between weighings, is the practical control. ## The solution: the least stable format The hydrochloride dissolves readily in water and gives an acidic solution; the EU additive specification sets pH 3.0–3.6 for a 2% aqueous solution. Activity is highest around pH 6.2, which is also the pH of the turbidimetric assay, but the working pH of a finished liquid is a compromise between activity, solubility and the stability of the other ingredients. A solution held at neutral pH and room temperature loses activity faster than a cold, mildly acidic stock. Water brings three risks at once. The protein can unfold at an interface, so stirring, pumping and filtration that create foam also create denaturation. Microbes can grow in a dilute solution even though lysozyme is itself antimicrobial at the right concentration. And oxygen, light and metal ions can modify the protein during a long hold. A liquid process needs a validated hold time, a microbial control and a container that excludes light; a bulk-powder result does not transfer to the beverage. If a liquid is unavoidable, keep the solution cold, control the pH, minimise foaming and dissolved oxygen, and measure activity at the end of the longest hold the process allows. Sterile filtration is preferable to a heat step for a protein that denatures near pasteurisation temperatures. ## What drives activity loss Factors that move lysozyme activity during storage | Factor | What it does | Control | Heat | Unfolds the protein; activity falls before appearance changes | Controlled store; cool process | Moisture | Raises loss on drying, caking and water activity | Sealed pouch; desiccant where needed | pH | Moves the protein away from its activity optimum | Validate the matrix pH; buffer if needed | Shear and foam | Denatures protein at air–liquid interfaces | Low-shear transfer; defoamer review | Light | Ultraviolet damage to the protein | Opaque or foil pack; dark store | Metal ions | Binding and colour changes in solution | Avoid iron and copper contact | Microbial load | Growth in a dilute solution; spoilage | Hygiene, filtration and a validated hold | Reducing sugars | Maillard browning in a moist powder blend | Low moisture; separate sugar from the enzyme These factors are not independent. A warm, humid store is worse than the sum of two separate effects, and a neutral solution in clear glass combines pH, light and oxygen. The useful question is not “is lysozyme stable?” but “stable in which pack, at which condition, for how long?” ## A stability protocol for the ingredient A useful protocol states the pack, the storage condition, the time points and the tests. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% relative humidity cover the warehouse; accelerated storage at 40 °C/75% relative humidity stresses the pack. A light-exposure arm covers the failure mode a dark incubator misses, and a freeze–thaw arm covers the shipping route. Test activity with the same unit definition as the release specification, plus protein, loss on drying, appearance, pH of a solution and microbiology. For a stick pack or a liquid, repeat the work in the matrix at the process pH and heat load. The report should show the individual results, not only a pass statement, and it should identify the pack and the lot family. Ask for the stability summary for the pack you will buy: a 25 kg drum and a 1 kg pouch have different headspace and different opening histories. ## The finished formula changes the answer A capsule or tablet has low water activity, but the shell and the excipients can still transfer moisture. Check loss on drying at release and after storage, and check the appearance of the fill. A direct-compression blend is gentler than a wet granulation, where water and drying heat are both applied to a protein; if the process uses water, the activity after drying belongs in the specification. A stick pack depends on the seal and the foil; a pinhole is a failure, and the strip should be inspected, not only the powder. A beverage combines pH, heat, oxygen and light, and the ingredient's bulk stability is the starting point rather than the answer. An overage is a label and stability decision; it does not repair a pack that lets moisture in, and it should not be used to cover an unmeasured process loss. ## How the shelf life is set We do not publish a single shelf-life number for lysozyme hydrochloride, because the pack and the storage condition set it. The assigned retest period belongs on the specification and is supported by the stability file for that pack. A number without a pack, a condition and a test panel is not a shelf life; it is a claim. After the retest period, re-assay the retained sample before extending use. Do not extend by assumption, and do not carry a bulk figure across to a repacked container. The product hub lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the analytical methods library describes the assay vocabulary; and the quality page describes the release workflow. ### 04 Lysozyme: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/enzymes/lysozyme/moq/ Reviewed: 2026-11-19 The MOQ for lysozyme hydrochloride is 1 kg, supplied as a 1 kg foil pouch; the standard bulk pack is a 25 kg fiber drum. Lead time is 1–7 days for the standard pack. A firm quotation needs six pieces of information: the salt form and CAS number, the activity with its unit definition, quantity and pack, destination and Incoterm, the documents required, and the intended use and market. In one lineOne kilogram is the minimum because it is the smallest sealed pack that can carry a lot code, a sample and a certificate for this enzyme. ## Why the minimum is 1 kg A 1 kg pack can cover a bench-scale trial, a retained sample and an independent activity test. It is also small enough to ship by air without a pallet, which matters when a formulator needs material before the production plan is fixed. The pack is a commercial unit with a lot code, not a scoop from a bulk drum. Below 1 kg, the material is usually split from a larger lot and repacked. That adds handling, loses the original pack identity and makes traceability harder, without changing the chemistry. The 25 kg drum is the bulk unit: it reduces handling per kilogram, but it commits inventory and a longer storage period. The MOQ is a pack decision, not a volume incentive. ## Packs and formats Standard lysozyme hydrochloride packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Particle profile changes; new certificate The catalog form is a 40 mesh powder: ≥95% through 40 mesh. Granulation is a different specification, not a packing choice. If the dosage form needs a coarser or freer-flowing powder, say so before the quotation, because the change moves the particle-size line, the activity basis and possibly the lead time. ## Lead time and dispatch The standard pack is quoted at 1–7 days from order confirmation. That window covers picking, document preparation and dispatch; it does not include shipping transit, customs clearance or the customer's own quality release. A custom granulation or a non-standard pack adds time, and the quotation should state it separately. Ask for the dispatch date, not only the lead time. A 25 kg drum may travel on a pallet and a 1 kg pouch as a parcel; the Incoterm decides who books the freight and who clears the entry. The documents should travel with the lot, not after it. A lysozyme powder is a protein, and enzyme powders can be respiratory sensitisers, so the safety data sheet belongs with the shipping papers and not only in the buyer's filing system. ## What a quotation needs Six items make a quotation firm enough to compare: - Product and salt form. Lysozyme hydrochloride, with the CAS number and the enzyme name written out. - Activity and unit definition. The U/mg figure, the Micrococcus substrate and the assay conditions, not only a number. - Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated variant. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, specification, SDS, allergen statement and any market-specific declaration the importer needs. - Intended use and market. Supplement, food or another use, and the market where it will be sold. A quotation without the salt form, the unit definition and the market is incomplete. The same powder can suit one destination and sit outside the file for another, and the paperwork is part of the offer. We do not publish commercial terms on this page; they are stated on the quotation. ## The sample is a lot, not a demonstration The 1 kg pack is the qualification sample. Test activity, protein, loss on drying and microbiology before scaling, and keep a retained sample from the same pack. The lot code on the sample, the COA and the quotation should match. A sample that cannot be traced to a lot is a demonstration, not a qualification. If the project needs a smaller quantity for a bench trial, discuss it before ordering. A split from a bulk lot is a repack with its own traceability, not the catalog pack, and it should be documented as such. Do not assume that a bench sample and the production drum will come from the same lot. The COA page shows which lines to test on the sample; the identity page shows the checks that separate a genuine lot from a diluted one. ## Terms to settle before the first order An enzyme offer is only comparable when it names the hydrochloride salt, the ≥20,000 U/mg activity with its unit definition and substrate, and the pack: 1 kg pouch or 25 kg drum. The quotation should put those details beside the trade term, dispatch window and documents, then name the specification version, the activity released per lot, the reference sample, when retest falls due and the change-control route. Because the assay is method-dependent, name the referee method in the quality agreement before the first order goes into production. Returns and replacements follow the quotation and the quality agreement. A lot that fails the agreed specification should be handled through the retained sample and a joint re-test, not through a photograph of the powder. Ask who pays for the referee test, and which laboratory is acceptable to both sides. The activity assay is method-dependent, so the referee method should be named in the agreement, not chosen after the result is known. The product hub carries the catalog specification; the compliance page covers the market files; the MOQ glossary entry defines the term; the logistics page covers shipping and documents; and the quality page describes the release file. ### 05 The regulatory file for lysozyme hydrochloride URL: https://nutrition.rainwoodbio.com/products/enzymes/lysozyme/compliance/ Reviewed: 2026-11-19 Lysozyme hydrochloride is a food enzyme and, in the European Union, the food additive E 1105. The same powder can be a processing aid, an additive or a dietary ingredient depending on the use and the market, and those are three different regulatory questions. This page sets out the file a buyer should assemble; the buyer's regulatory team confirms the route for the destination. In one lineThe specification describes the powder; the regulatory file shows which lysozyme form, which use and which label the destination allows. ## What the file contains A complete file answers four practical questions. What is the material, and which specification version is being bought? Which lot is being released, and what does its certificate report? Which route and label rules apply to the finished product in the destination market? And what changes if the source, the salt form or the pack changes? The certificate of analysis answers the lot question, the technical data sheet answers the specification question, and the safety data sheet answers the handling question. None of them answers the route question on its own. The file should also contain the allergen statement, the origin record, the GMO statement, the residual-solvent statement and any customer-specific declaration. For lysozyme the allergen statement is not a formality: the common food-grade material is obtained from hen egg white, and where that is the source, egg is a listed allergen in several markets. Where a statement is not available for the lot, the gap should be named before the order, not discovered at the port. ## European Union Regulation (EC) No 1333/2008 authorises lysozyme as E 1105 in ripened cheese at quantum satis. That entry is specific to the food category and to the additive function; it does not authorise a capsule or a powder blend sold as a food supplement. Lysozyme is also a food enzyme under Regulation (EC) No 1332/2008, and the current Union list and conditions decide the enzyme use. For wine, the OIV code sets a cumulative maximum of 500 mg/L when lysozyme is applied to must and wine; the EU oenological rules and the destination's implementation have to be checked in the current text. Egg is an allergen listed in Annex II of Regulation (EU) No 1169/2011. Where lysozyme from egg white is present in a food, the ingredient list has to indicate egg, subject to the specific rules and any derogation that applies to the product. A supplement label does not inherit the cheese entry, and the buyer's regulatory team confirms the route and the labelling for the finished product. ## United States Egg white lysozyme appears in the FDA's inventory of food substances with uses as an antimicrobial agent and an enzyme, and GRAS Notice 64 covers its use on casings for frankfurters and on cooked meat and poultry products. Those uses do not establish every other use. A lysozyme powder sold as a dietary ingredient needs a basis that covers the ingredient and the intended use, and the buyer's regulatory team confirms whether a notification or another route applies. Egg is a major food allergen in the United States, so a product that contains egg-white lysozyme has to declare egg in the ingredient statement where the allergen labelling rules apply. The claim review is separate: the certificate does not approve a claim, and an enzyme activity is not a clinical effect. Great Britain checks its own register and labelling rules, while Northern Ireland follows the EU framework; the destination decides which applies. ## Contaminants and limits The contaminant panel is a finished-product calculation, not only a drum result. The table below is the catalog release panel for this powder. The EU additive specification sets its own limits for arsenic, lead and mercury, and JECFA's monograph for lysozyme hydrochloride sets lead at not more than 2 mg/kg; the destination text and the daily dose decide the final gate. Catalog contaminant and microbiology limits · lysozyme hydrochloride | Parameter | Catalog limit | What the file should show | Lead (Pb) | ≤3 mg/kg | Lot result, method and the finished-product calculation | Arsenic (As) | ≤2 mg/kg | Lot result and the destination limit that applies | Cadmium (Cd) | ≤1 mg/kg | Lot result and any category exception | Mercury (Hg) | ≤0.1 mg/kg | Lot result and method | Total plate count | ≤1,000 cfu/g | The measured count for the lot | Yeast and mould | ≤100 cfu/g | The measured count for the lot | E. coli and Salmonella | Absent | The absence statement and the sample size A sum of heavy metals is not a substitute for the element that matters. Ask for a figure per element, with the method and the detection limit. A “not detected” line without a limit describes the method's sensitivity, not the sample. ## Claims and the label The label names the material, the quantity and the source in the form the destination requires. For this ingredient the name is not settled by the word “lysozyme” alone: the powder is a hydrochloride, and the destination may expect the salt name, the enzyme name or the additive name E 1105. The salt comparison sets out the naming difference. No disease-related claim is made for this material, and an activity figure in U/mg is not a clinical result. A structure/function or other permitted statement is reviewed by the brand's regulatory reviewer for the product, the form and the market; the certificate does not approve it. An antimicrobial function in a food is a technical effect, not a health claim, and it does not become one when the same powder is put in a capsule. ## Documents for the file - Specification, with the revision number, the salt form, the activity unit definition and the assay reference. - COA for the lot, with the measured results, methods, release limits and lot code. - Technical data sheet and safety data sheet, including any respiratory-sensitiser statements. - Allergen statement for the declared source (egg, where the material is egg-white lysozyme), and the source statement. - Origin, GMO and residual-solvent statements. - Regulatory support for the destination route, as agreed with the buyer. - Change-control notice for any change in source, salt form, process or pack. ## Checklist before the first order - Specification version, CAS number and the exact salt form are named. - The intended use and the destination market are written into the quotation. - COA, TDS, SDS, allergen, origin, GMO and residual-solvent documents are on file. - The contaminant results are converted to the finished-product dose. - The label name, the activity declaration and the allergen statement have been reviewed. - The source, process and pack are under change control. - The quotation, the specification and the certificate refer to the same version. The catalog specification sits on the product hub; the COA page explains the lot certificate; the identity page covers the analytical evidence; the quality page describes the release file; the EU regulatory note and the methods library provide the framework references. ### 06 How we prove a lysozyme lot is lysozyme hydrochloride URL: https://nutrition.rainwoodbio.com/products/enzymes/lysozyme/identity/ Reviewed: 2026-11-19 A lysozyme hydrochloride lot is the named material when four lines agree: the document names the enzyme and the salt form, the turbidimetric assay gives the declared activity under the stated conditions, the protein and chloride figures fit the hydrochloride, and the lot code ties the powder to the certificate. The activity alone cannot separate a genuine lot from a dilution, a free-base preparation or a different protein. Each line answers a different question, and a weakness in one leaves a gap the others cannot fill. In one lineIdentity is the agreement between the activity assay, the protein figure, the chloride content and the lot code, not the activity number alone. ## The four layers of identity The first layer is the document: the name, the CAS number, the source and the salt form. The second is the activity, measured by an assay whose substrate, temperature, pH and detection principle are written down. The third is the composition of the powder around the enzyme: how much protein it carries and whether chloride is present. The fourth is traceability, because a correct certificate attached to a different drum is still the wrong document for the delivery. Four layers of lysozyme hydrochloride identity | Layer | Question | Test | What it proves | Document | Is the enzyme and salt form named? | Name, CAS number, source | Paperwork only | Activity | Does the powder lyse the substrate at the declared rate? | Turbidimetric assay on Micrococcus | The enzyme action, under one method | Composition | Is it the hydrochloride, and is it diluted? | Protein, chloride, loss on drying | The salt form and the concentration | Traceability | Does the certificate belong to this pack? | Lot code on pack, certificate and retained sample | The link between paper and powder ## The protein and chloride ratios The activity figure becomes a concentration check when it is divided by protein. Specific activity, in U/mg protein, separates a genuine concentrate from a powder extended with maltodextrin or glucose: dilution lowers both the activity per gram of powder and the protein per gram, so the ratio holds while the absolute figures fall. Protein is read by ultraviolet absorbance with a maximum at 281 nm and a minimum at 252 nm, or by a colorimetric assay against a standard. The certificate should name the method, because the two do not give the same denominator. The salt form has its own ratio. The hydrochloride carries chloride as the counter-ion; a free-base preparation does not. Chloride by ion chromatography or titration therefore answers a question the activity assay cannot: two powders can both lyse Micrococcus at 20,000 U/mg and differ in whether the label name “hydrochloride” is true. The EU additive specification also sets a protein-content gate, not less than 950 mg/g on the anhydrous basis, which a U/mg figure alone does not demonstrate. Neither ratio is a purity figure in the mineral sense. A lysozyme preparation is a protein powder with residual source proteins and possibly a carrier; the useful question is whether the activity, the protein and the chloride are consistent with the specification, not whether the powder is 100% enzyme. ## X-ray diffraction and the solid state X-ray diffraction answers a narrow question: is the solid crystalline, and does its pattern match a reference? Lysozyme is a protein that can be crystallised, so a diffraction pattern can distinguish a crystalline preparation from an amorphous dilution, and it can compare lots from two sources. It can also identify a crystalline carrier such as sodium chloride or a sugar in a blend. It is not a routine release test for this product, and it is not a purity assay. A certificate that reports only “XRD conforms” without the pattern, the reference and the detection limit has added little. Ask for the reference diffractogram and the limit of detection before reading a match statement. For a disputed lot, XRD plus activity plus protein plus chloride is stronger than any one of them, but the activity assay remains the primary identity test for an enzyme. ## What adulteration looks like Lysozyme hydrochloride substitutions and the signals | Adulterant or mismatch | What it does | Signal | Test | Maltodextrin or glucose | Lowers activity and protein per gram | Both figures fall together | Activity, protein, loss on drying | Egg white powder | Adds other egg proteins and lowers activity per gram | Protein pattern differs; activity low | SDS-PAGE, activity, protein | Free base instead of hydrochloride | Changes the salt, mass and solution pH | Chloride absent or low | Chloride by ion chromatography | Hydrolysed lysozyme | Different ingredient; little or no enzyme activity | Activity low despite protein | Activity, peptide pattern | Different lysozyme source | Same enzyme name, different source | Source statement or pattern differs | Source-specific ELISA, protein pattern | Mislabelled lot | Certificate belongs to another pack | Lot code mismatch | Pack, certificate and retained sample Colour and appearance are the weakest signals. White to off-white covers a wide range, and a dilution can look the same as a concentrate. The stronger signals are the activity-to-protein ratio, the chloride figure and the protein pattern. A certificate that reports appearance and activity but not the composition around the enzyme has left the most likely substitution untested. ## How to write identity into the specification - “Lysozyme hydrochloride, CAS 9001-63-2, enzyme name muramidase, source declared on the certificate.” - “Activity ≥20,000 U/mg by the turbidimetric Micrococcus assay, with the unit definition and assay conditions stated.” - “Protein and specific activity reported; chloride reported where the hydrochloride form is claimed.” - “Loss on drying ≤5.0%; particle size ≥95% through 40 mesh.” - “Identity by activity assay and IR; SDS-PAGE pattern against a reference lot on request.” - “Egg allergen statement and source statement attached to the lot.” - “Destination market and salt form confirmed before the order.” ## Five questions for the supplier - Which salt form is this lot, and which CAS number and source are on the certificate? - What is the exact unit definition, and what substrate, temperature and pH produced the U/mg figure? - What are the protein and chloride results for this lot, and which methods were used? - Can you provide the activity chromatogram or assay worksheet and the SDS-PAGE pattern, not only the final number? - If the lot is disputed, will you accept a joint re-test on the retained sample? Five direct answers amount to an identity file. A single activity percentage does not. The product hub carries the catalog specification; the COA page shows where each figure sits on the certificate; the grades page compares the activity and physical options; the salt comparison covers the label consequences; the methods library explains the analytical vocabulary; and the quality page describes the release workflow. ### 01 What the COA for pancreatin actually contains URL: https://nutrition.rainwoodbio.com/products/enzymes/pancreatin/coa/ Reviewed: 2026-11-19 The certificate for a pancreatin lot reports the three USP activities — amylase, protease and lipase — each with the substrate and conditions that define its unit, the ratio between them, loss on drying, heavy metals, microbiology and particle size. The limits below are the catalog specification; the batch COA is the document that confirms a particular pack. An activity figure without its unit definition cannot be compared with any other certificate. In one lineA pancreatin certificate is complete only when each activity carries its USP unit, substrate and conditions, and the ratio to the other two is reported beside the individual results. ## The certificate as a test report A certificate is a test report before it is a commercial document. Every parameter needs what was measured, which method produced the number, and the limit the lot was released against. A line that says only “conforms” asks the reader to trust a conclusion. Pancreatin needs more evidence than most powders, because one material carries three activities. Release parameters · pancreatin 1×, catalog limits | Parameter | Method | Release limit | Identification | Infrared spectrum and the three activity assays | IR conforms; all three activities present | Amylase | USP assay; starch, pH 6.8, 25 °C | ≥25 USP U/mg | Protease | USP assay; casein, pH 7.5, 40 °C, 60 min | ≥25 USP U/mg | Lipase | USP assay; olive oil, pH 9.0, 37 °C | ≥2 USP U/mg | Loss on drying | USP general chapter 731; vacuum, 60 °C, 4 h | ≤5.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh The activity rows define the product; the identification row only means something when it includes them, because an infrared spectrum can match a reference while the lipase has been lost. ## What one USP unit means, and the basis of the number The three units are rates, not masses. One USP unit of amylase decomposes starch at 0.16 µEq of glycosidic linkage per minute; one unit of protease liberates, per minute, peptides not precipitated by trichloroacetic acid that match the absorbance of 15 nmol of tyrosine at 280 nm; one unit of lipase liberates 1.0 µEq of acid per minute at pH 9.0 and 37 °C. The substrate, pH, temperature and standard are part of each definition; a USP unit is not a FIP or house unit. The activity is reported per milligram of powder as weighed. With loss on drying up to 5.0%, an as-is and a dried-basis figure can differ by about 5%; the certificate should state the basis and print the loss-on-drying result beside it. The catalog follows the USP activity definitions, not full monograph compliance. The monograph also sets a fat limit, microbial absence and a storage condition; if the lot is bought against it, ask for those lines too. ## Release limit versus batch result The release limit is the boundary; the batch result is the measurement. Both belong in separate columns, with the method beside them. A result column that repeats the specification is a copy of the gate, not evidence that it was passed. What the batch result column should contain | Parameter | Release limit | Result column | Amylase | ≥25 USP U/mg | A measured figure, with the assay and the standard | Protease | ≥25 USP U/mg | A measured figure, with the assay and the standard | Lipase | ≥2 USP U/mg | A measured figure, with the assay and the standard | Ratio | Not fixed by the minima | The three results, and the ratio calculated from them | Loss on drying | ≤5.0% | A measured percentage | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement The activity limits are one-sided, and the minima do not fix the ratio. A lot at 200 amylase, 200 protease and 2 lipase U/mg passes every minimum but carries 100 amylase units per lipase unit, eight times the 12.5 in the 25/25/2 ratio; specify a target ratio and a tolerance, not only three floors. Near a limit, ask for the raw record: sample weight, blank, standard, replicate titres and calculation. ## What moves between batches Pancreatin is a tissue extract, so the starting material moves first. The monograph allows hog or ox pancreas, and the species can change the protein profile, the colour and the natural activity ratio. Gland quality, extraction and concentration add variation; standardisation evens out the total while the ratio, the fat content and the protein load still move. The monograph permits dilution with lactose, with sucrose containing not more than 3.25% starch, or with lower-activity pancreatin, so the carrier is part of the lot history. A lactose-diluted lot and a concentrate at the same amylase figure are not the same powder: the diluent adds mass and a milk-derived allergen that the label has to declare. Colour and odour are less quantitative and often more revealing. Residual fat can oxidise, and a rancid note points to an ageing lot even when the activities pass. Lipase drifting towards 2 U/mg while amylase stays high, loss on drying climbing or fat approaching its limit together describe a material that is changing. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a pharmacopoeial purchase, a disputed result or a method mismatch. The panel is the three USP activities on one sample, infrared identification, loss on drying, fat, heavy metals, microbiology and particle size. An outside figure is comparable only if the laboratory used the same assay; change the substrate, pH, temperature or standard and the number moves for reasons unrelated to the lot. Ask for the method, the reference standard and the reporting limits with each result; for a pharmacopoeial purchase, test the full monograph rather than the triad. The sample tested should be the sample retained, and the report should name the lot. When a result is contested, give the referee the retained sample, the certificate and the specification, and ask both laboratories for the raw titration; a second run by the same method is stronger than a second opinion on the first report. ## What to compare between suppliers Compare six lines: the three results and their ratio; the unit definitions and the monograph edition; the species and tissue record; the carrier; loss on drying, fat and microbiology; the pack and lot code. Two certificates that both read “25/25/2 USP U/mg” can describe different ratios, species and carriers. The activity lines are the first comparison, not the last. The catalog position is on the pancreatin product page; the ratio question continues on the grade page and the pancreatin versus pancrelipase comparison; the evidence that the powder matches the certificate is on the identity page; the assays are described in the methods section; the release workflow is on the quality page. ### 02 Pancreatin 1×, a multiple or a dilution: choosing a grade URL: https://nutrition.rainwoodbio.com/products/enzymes/pancreatin/grades/ Reviewed: 2026-11-19 Pancreatin is sold as a 1× powder that meets the three USP minima, as a higher-potency multiple labelled 2×, 3× or more, and as a dilution on a declared carrier. The grade changes the mass per serving, the carrier on the label and the dust in the room; it does not change the definition of the three units. The catalog here is the 1× powder. In one lineThe grade is an activity level plus the material that carries it: a 1× powder, a 3× concentrate and a lactose dilution are three different specifications. ## Why pancreatin comes as more than one grade One extract can be presented at different activity levels. The USP monograph allows a higher activity to be labelled as a whole-number multiple of the three minimum activities, so a 3× powder meets at least 75 USP U/mg amylase, 75 USP U/mg protease and 6 USP U/mg lipase. A dilution takes the same extract and adds lactose, sucrose or another declared carrier. Both are legitimate grades; neither is a different enzyme. The grade decision is a mass-balance decision. The activity target per serving is fixed, so activity per milligram sets the powder weight. That weight has to fit the capsule, disperse in the stick pack or blend without segregating, and remain weighable at production scale. ## The grades side by side Pancreatin grades · what changes in the drum | Grade | Activity per mg | What it is | Fits | Watch | 1× powder, 40 mesh | ≥25 / ≥25 / ≥2 USP U/mg | Standard tissue extract | Capsules, tablets, blends | Fill weight and the ratio target | Multiple, 2×–6× | 2–6× the minima, declared as the multiple | Concentrated extract | High target in a small fill | Dust; the ratio may differ from 1× | Dilution | Agreed; the lot still meets the 1× minima | Extract on lactose or sucrose | Large fill or a low target | Carrier allergen and blend uniformity | Granulated | Same as the base powder | Agglomerated powder | Tablets, sachets, low-dust rooms | Heat and moisture added by the step The table is deliberately short. A grade is not a different species, a different unit or a different assay; it is the same extract at a different activity per gram or on a different carrier. An offer that changes the species or the assay is a different material, not a grade. ## What changes in the drum The catalog powder passes 40 mesh, about 425 µm. It is off-white to light tan, soluble in water with a slight turbidity, and carries a glandular odour. The powder raises dust when poured, and enzyme dust is a respiratory sensitiser, so a low-dust grade can matter more to the room than a higher number matters to the formula. Granulation improves flow and reduces dust, but it adds a binder, water or solvent, a drying step and a milling step. The activity has to be measured after granulation, not assumed from the base powder. A dilution changes the particle-size distribution as well: the carrier may be finer or coarser than the extract, and the two can separate in a blender or hopper. Ask for the particle size of the blend, not only of the enzyme. A multiple keeps the particle size but raises the activity per scoop, which makes small inclusions harder to weigh accurately and raises the dust load per gram of activity. ## What changes in the finished product The arithmetic is simple and easy to get wrong. A 250 mg fill of 1× powder carries at least 6,250 USP units of amylase, 6,250 of protease and 500 of lipase, because the minima are 25, 25 and 2 U/mg. A 3× powder carries three times that in the same mass. If a formula targets a fixed number of units per serving, the powder weight is the target divided by the activity per milligram. The fill weight is the constraint. A capsule, a stick pack and a tablet each have a practical mass; a low-activity grade may need more powder than the pack can hold, and a high multiple may need a weigh-up that the plant cannot hit accurately. The carrier appears in the ingredient list, and lactose brings a milk-derived allergen into the label. For a blend, the grade has to match the other components. A pancreatin at 25/25/2 and a lipase or amylase added separately are weighed in different amounts; changing the pancreatin grade changes the blend ratio and can change the uniformity of the minor components. Specify the units of each activity per serving, not only the mass of pancreatin. ## What to write into the specification - “Pancreatin 1×, 2×, 3× or the declared multiple, from hog or ox pancreas, CAS 8049-47-6.” - “Amylase ≥25, protease ≥25 and lipase ≥2 USP U/mg, multiplied by the declared potency, with the unit definitions and assay conditions.” - “Target ratio and tolerance for the three activities, not only three minima.” - “Loss on drying ≤5.0%; fat to the monograph limit for the potency.” - “Carrier identity and inclusion; particle size ≥95% through 40 mesh.” - “Storage in a tight container at not more than 30 °C.” A line that reads only “pancreatin 25/25/2” leaves the species, the carrier and the ratio open. The specification should be written so that a second laboratory could reproduce the three assays and a second blender could reproduce the blend. ## When a different grade is the wrong choice Do not use a multiple to hit a low target: the weigh-up error grows as the inclusion shrinks. Do not choose a lactose dilution for a label that has to declare no milk. Do not switch grade without recalculating the label and the blend, because the three activities do not scale identically when the extract is standardised. And do not accept a lot whose ratio is wrong because the total activity looks high. The catalog position is on the pancreatin product page; the release tests are on the COA page; packing and minimum order are on the MOQ page; the lipase page and the amylase page show how a single-activity enzyme differs from a triad. ### 02.1 Pancreatin vs pancrelipase: the triad, the ratio and the label URL: https://nutrition.rainwoodbio.com/products/enzymes/pancreatin/grades/pancreatin-vs-pancrelipase/ Reviewed: 2026-11-19 Pancreatin and pancrelipase are both USP articles made from pancreas, and both are assayed with the same three USP units, but they are not interchangeable. Pancreatin is a minimum of 25 USP U/mg amylase, 25 protease and 2 lipase, from hog or ox pancreas; pancrelipase is a minimum of 100 amylase, 100 protease and 24 lipase, from hog pancreas, labelled by lipase activity. The ratio and the label follow from those two monographs, and so does the regulatory route. In one lineThe two monographs share three USP units but not the same ratio, source or label: pancreatin is an amylase-protease-lipase 25:25:2 triad from hog or ox pancreas, pancrelipase a 100:100:24 lipase-led article from hog pancreas. ## Two monographs, two articles Both articles are pancreas extracts, but the monographs define them differently. The minima, the permitted species, the ratio and the label basis all change together. USP pancreatin and USP pancrelipase · the article definitions | Property | Pancreatin | Pancrelipase | Source | Hog or ox pancreas | Hog pancreas only | Minima per mg (amylase : protease : lipase) | 25 : 25 : 2 USP U | 100 : 100 : 24 USP U | Ratio (amylase : protease : lipase) | 12.5 : 12.5 : 1 | 4.17 : 4.17 : 1 | Lipase per mg | 1× | 12× the pancreatin minimum | Labelling basis | A whole-number multiple of the three minima, or pancreatin | Lipase activity in USP units | Storage | Tight container, not more than 30 °C | Tight container, not more than 25 °C The table is the comparison in one view. The two articles are not the same material at different dilutions: the ratio changes, the permitted species changes, and the label basis changes. ## The ratio is the product The minima are floors, and the ratio is the part that matters. Pancreatin at its minima is 12.5 parts amylase and 12.5 parts protease to one part lipase. Pancrelipase at its minima is about 4.17 parts of each to one part lipase, with twelve times the lipase per milligram. Work the arithmetic on a 100 mg inclusion. At the minima, 100 mg of pancreatin carries 2,500 amylase, 2,500 protease and 200 lipase units. The same 100 mg of pancrelipase carries 10,000 amylase, 10,000 protease and 2,400 lipase units. Delivering 2,400 lipase units from 1× pancreatin at its minimum would take 1,200 mg of powder, twelve times the mass. That is why the lipase-rich article exists, and why a formulator cannot use the two as interchangeable weights. Pancrelipase is not a uniform concentrate of pancreatin, either. Its amylase and protease are only four times higher per milligram, not twelve. A formula built on the 12.5 : 12.5 : 1 ratio cannot be rebuilt by weighing less pancrelipase, because the balance of the three activities would change. ## The units are shared, the material is not The two monographs use the same three USP unit definitions. One USP unit of amylase decomposes starch at 0.16 µEq of glycosidic linkage per minute; one unit of protease liberates, per minute, peptides not precipitated by trichloroacetic acid that match 15 nmol of tyrosine at 280 nm; one unit of lipase liberates 1.0 µEq of acid per minute at pH 9.0 and 37 °C. A USP lipase unit from pancreatin and a USP lipase unit from pancrelipase are therefore the same unit, measured by the same assay. A shared unit is not a shared material. The unit says how fast a preparation works under one assay; it does not say how much amylase or protease sits beside it. Nor does it make the unit interchangeable with FIP, Ph. Eur. or supplier units, which use different substrates and conditions. The LU versus FIP note on the lipase page shows the same problem in another unit system. ## What the label declares Pancreatin may be labelled as a whole-number multiple of the three minimum activities when it is stronger than 1×, and a dilution has to declare its carrier. A supplement panel that declares pancreatin should state the three activities and the species, not only the mass of powder. “Pancreatin 25/25/2” describes the minimum; a 3× lot should be labelled 3× and meet 75/75/6. Pancrelipase is labelled to indicate lipase activity in USP units. The monograph requirement is the lipase figure, so a buyer should ask for the amylase and protease results on the same certificate and on the label. Calling a 12× pancreatin “pancrelipase” because the lipase numbers match is a label error: the article, the source and the ratio are different. Calling pancrelipase “pancreatin 12×” has the same problem in reverse. ## Two routes, not one In the United States, pancrelipase is the active substance of FDA-approved prescription products. A pancreatin ingredient for a supplement or a food use is reviewed on its own basis, which the brand's regulatory team confirms; the certificate does not establish it. A pharmacopoeial article supplied for a drug product is a separate route again. In the EU, a food enzyme sits under Regulation (EC) No 1332/2008, and the Union list is still pending at this review, so national provisions apply under Article 24. In the UK, Great Britain and Northern Ireland are checked separately. No page on this site asserts that either article is authorised for a named market; the destination, the finished product and the intended use decide. ## When each is the right purchase Choosing between pancreatin and pancrelipase | Situation | Article to specify | A supplement or food enzyme built on the 25:25:2 triad | Pancreatin 1×, with the species named | A high lipase activity in a small fill | Pancrelipase, with the full ratio checked | An ox-pancreas source | Pancreatin; pancrelipase is hog only | A label that already declares pancrelipase | Pancrelipase, with the regulatory route confirmed | A formula built on the pancreatin ratio | Pancreatin; pancrelipase is not a weight-for-weight substitute The choice is not made by comparing one number. Put the source, the three activities, the ratio, the label basis and the regulatory route side by side, and change the specification and the label together if the article changes. The catalog position is on the pancreatin product page; the grade options are on the pancreatin grade page; the release lines are on the COA page; the single-activity comparison is on the lipase page and the amylase page; the market files are on the compliance page; the release workflow is on the quality page. ### 03 Pancreatin activity falls with heat and moisture; the pack sets the shelf life URL: https://nutrition.rainwoodbio.com/products/enzymes/pancreatin/stability/ Reviewed: 2026-11-19 Pancreatin is a mixture of proteins with residual fat, and its three activities are lost to heat, moisture, acid pH and water. A sealed, dry powder held at or below 30 °C keeps its triad for the assigned retest period; an aqueous solution loses activity within hours and is not a storage format. Shelf life belongs to the pack and the storage condition, not to the certificate. In one lineA sealed, dry powder holds the triad; heat, moisture and any aqueous hold are what take the activity away, and the pack decides what is left at the end of shelf life. ## The dry powder: moisture, temperature and fat The dry powder is the stable format because molecular mobility is low. The catalog limit is loss on drying ≤5.0%, and the USP monograph keeps pancreatin in a tight container at not more than 30 °C. Water activity predicts stability better than the moisture percentage: a powder at 5% water can still fail if the water is mobile, and a well-bound 5% can be safe. A sealed foil pouch with a desiccant is the practical barrier. The extract carries residual fat, limited by the monograph, and that fat can oxidise. A rancid or tallowy odour is a stability signal before any activity result moves. Keep the pack cool, dry and dark, and let a cold pack reach room temperature before opening so that condensation does not form on the powder. A transparent jar is not a storage container for a protein powder with fat in it. ## The aqueous solution: the least stable format Once the powder is dissolved, the clock starts. The proteases in the mixture can attack each other and the other proteins, the lipase works at the oil-water interface, and a dilute solution is a good medium for microbial growth. Activity in water at room temperature falls within hours, faster when warm and faster at a pH away from the assay window. The solution is slightly turbid, not clear, so appearance is a weak check. If a process needs a liquid stage, make it shortly before use, keep it cold, avoid foaming and shear, buffer the pH, and measure all three activities at the start and end of the hold. A bulk-powder stability result does not transfer to a beverage or a liquid blend; the matrix and the hold time decide. ## What drives the loss Stability factors · what changes the three activities | Factor | Effect | Control | Heat | Denaturation; the loss is not recovered on cooling | Keep drying, granulation and coating cool; assay after the step | Water | Mobility, hydrolysis, caking and microbial growth | Sealed pack, desiccant, dry excipients | pH | Activity and stability fall outside the assay window; acid pH is hard on lipase | Buffer the liquid stage; check the finished matrix | Oxygen | Oxidation of protein and residual fat; odour | Low headspace, sealed pack, declared antioxidant only | Light | Oxidation and colour change | Foil or opaque pack; dark store | Metal ions | Protein oxidation and complexation | Avoid iron and copper contact | Microbial growth | Counts rise in aqueous systems | Preserve or make fresh; validate the hold The factors act together: a warm, humid granulation is worse than either condition alone, and a reducing sugar in a wet blend adds a browning path. ## A stability protocol for the ingredient Test the material in the pack and form in which it will be sold. Store the commercial pack at 25 °C/60% RH and at 30 °C/65% RH, and pull samples at 0, 1, 3, 6, 12 and 24 months. Assay amylase, protease and lipase, calculate the ratio, and test loss on drying, fat, appearance and microbiology. Accelerated storage at 40 °C/75% RH is a screening tool, not a shelf-life result: enzyme inactivation is not a simple first-order reaction across a wide temperature range, so an Arrhenius extrapolation from a hot cabinet can overstate the life. Repeat the work in the finished form: the capsule, the tablet, the stick pack or the blend. The excipients, the water activity of the mix, the compression step and the coating each change the loss rate. The acceptance criterion is the minimum activity at the end of the shelf life, not the release activity. ## The finished formula changes the answer Granulation is the step most likely to damage the extract. If pancreatin is added to the granulation water, it is in solution through the wet step and the drying step, and the loss can be large. The safer route is to granulate the other components, dry them, and add the enzyme in the final dry blend. Roller compaction avoids water but still generates heat. Tableting adds pressure and local heat; measure the three activities in the finished tablets, not only in the blend. Aqueous film coating is another water source. In a stick pack the laminate and the water activity of the powder decide the life, because a single-serve pack cannot hold a desiccant sachet. A beverage combines water, pH, heat and oxygen and is the least stable format. An overage is a formulation choice, not a stability result. If one activity survives the process better than another, the ratio at release and the ratio at end of life are different; state both. ## How the shelf life is set Shelf life is a property of the pack and the storage condition, not of the molecule. The assigned retest period belongs on the specification and is supported by real-time data for that pack and grade. A dry powder in a sealed foil pouch is commonly given a life measured in years; a granulated or diluted grade, a stick pack or a warm-market pack can be shorter. The number should be accompanied by the storage condition and the end-of-life activity. After the retest period, re-assay the retained sample before extending use. Do not extend by assumption, and do not carry a bulk figure across to a repack. The release tests are on the COA page; packing and order quantities are on the MOQ page; the grade options are on the grade page; the microbiological panel is described in the methods section; the release workflow is on the quality page. The catalog position is on the pancreatin product page. ### 04 Pancreatin: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/enzymes/pancreatin/moq/ Reviewed: 2026-11-19 The minimum order for pancreatin is 1 kg, supplied as a 1 kg foil pouch from a released lot; the scale pack is a 25 kg fiber drum. Lead time is 1–7 days for the catalog 1× powder. A quotation needs six details: species and grade, the three activities with methods and ratio, quantity and pack, destination and Incoterm, documents, and intended use. In one lineOne kilogram from a released lot is the qualification unit; the pack, the grade and the destination decide the rest of the order. ## Why the minimum is 1 kg The first kilogram is a qualification unit, not a production batch. It is enough to run the three USP assays in your own laboratory, make a small blend, fill a short trial of capsules and keep a retained sample. A smaller split would be less useful to test and would no longer represent a full pack from the lot. The pouch is drawn from a released lot and carries that lot's certificate. The 25 kg drum is the same material at production scale, not a different grade. Between the two packs there is no change in the specification; only the pack, the handling and the shipping weight change. A custom multiple, a dilution or a granulation is made to order, so its minimum is set by the smallest blend the plant can make uniformly; that figure is confirmed in the quotation rather than assumed from the 1 kg catalog pack. ## Packs and formats Standard pancreatin packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Activity measured after the step | Custom dilution | On request | Lower activity per gram | Carrier declared; blend uniformity checked The label on the pack should repeat the product name, the species, the three activities with their units, the lot code, the manufacture or release date, the storage condition and a reference to the SDS. The lot code on the pouch, the certificate and the retained sample should match. ## Lead time and dispatch The standard pack is quoted at 1–7 days from order confirmation. That window covers picking, document preparation and dispatch; it does not include shipping transit, customs clearance or the customer's own quality release. A custom multiple, a dilution or a granulation adds time, and the quotation should state it separately. Ask for the dispatch date, not only the lead time. A drum travels on a pallet and a pouch as a parcel; the Incoterm decides who books the freight and who clears the entry. The documents should travel with the lot, not after it. ## What a quotation needs Six items make a quotation firm enough to compare: - Product, species and grade. Pancreatin 1× or the declared multiple, hog or ox pancreas, CAS 8049-47-6. - Specification. The three activities with units and methods, the target ratio, loss on drying, fat, microbiology and particle size. - Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated or diluted variant. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, specification, TDS, SDS, allergen statement and species statement. - Intended use and market. Supplement, food or another use, and the market where it will be sold. A quotation without the species and the ratio is incomplete. The same three numbers from two species can describe different materials, and the paperwork is part of the offer. Commercial terms are stated on the quotation, not on this page. ## The sample is a lot, not a demonstration The 1 kg pack is the qualification sample. Test the three activities, the ratio, identity, loss on drying and microbiology before scaling, and keep a retained sample from the same pack. The lot code on the sample, the COA and the quotation should match. A sample that cannot be traced to a lot is a demonstration, not a qualification. If the project needs less material for a bench trial, discuss it before ordering. A split from a bulk lot is a repack with its own traceability, not the catalog pack, and it should be documented as such. Do not assume that a bench sample and the production drum will come from the same lot. ## Terms to settle before the first order The quotation sets out the commercial terms, the Incoterm, the pack, the lead time and the documents. The quality terms belong beside them: the specification revision, the COA per lot, the retained sample, the retest period and the change-control route. A quality agreement is worth having before the first production order. Returns and replacements follow the quotation and the quality agreement. A lot that fails the agreed specification should be handled through the retained sample and a joint re-test, not a photograph of the powder. Ask who pays for the referee test and which laboratory is acceptable to both sides. Changes to the species, the carrier or the activity target are specification changes, not packing notes; they need a written revision. The catalog position is on the pancreatin product page; the release lines are on the COA page; the grade options are on the grade page; the assay descriptions are in the methods section; the release workflow is on the quality page. ### 05 The regulatory file for pancreatin, a three-activity gland extract URL: https://nutrition.rainwoodbio.com/products/enzymes/pancreatin/compliance/ Reviewed: 2026-11-19 Pancreatin is a glandular extract with three enzyme activities, and its regulatory file is built around the species, the activities, the carrier and the intended use. In the EU a food enzyme sits under Regulation (EC) No 1332/2008; in the US the supplement route and the prescription pancrelipase route are separate; in the UK the GB and Northern Ireland positions are checked separately. The buyer's regulatory team confirms the route for the destination, and this page lists the evidence and checks that belong in the file. In one lineThe file has to show the species, the three activities, the carrier and the intended use, because a food enzyme, a supplement ingredient and a pharmacopoeial article are three different routes. ## Four checks, not one The file answers four questions: whether the material may be used in the intended food or supplement in that market; whether the lot meets the contaminant and microbiological limits; how it is described on the label, including the carrier; and what the brand says about it. Permission, purity, labelling and claims are four different checks, and a certificate of analysis answers only the second one. Pancreatin is a tissue extract, so the source belongs in the file: hog or ox pancreas, the tissue record and the species statement. The grade matters too. A product sold against a pharmacopoeial monograph is a different article from a food-grade powder with the same three activity figures, and the file should say which one is being bought. The specification, the certificate and the label should all refer to the same revision. ## European Union Food enzymes fall under Regulation (EC) No 1332/2008. The regulation requires an enzyme to be included in the Union list before it is placed on the market or used in food, but the Union list has not been adopted. Article 24 provides that, until the list applies, national provisions on the placing on the market and use of food enzymes continue to apply in the member states. As of this review the list is still pending; check the current text before a launch. The file should show the application or register entry that covers the enzyme and its intended use, and the member state of sale should be named, not only “the EU”. Labelling and the carrier statement are checked separately: a lactose dilution brings a milk-derived allergen into the declaration. Great Britain applies assimilated Regulation 1332/2008 and keeps its own register; Northern Ireland follows the EU framework, and the two are checked separately. ## United States In the United States, pancrelipase is the active substance of FDA-approved prescription products. A pancreatin ingredient for a supplement or a food use sits on a different route: the brand's regulatory team confirms whether it qualifies as an old dietary ingredient, whether a GRAS basis covers the food use, and how the Supplement Facts panel names it. The certificate does not answer that question. Labelling follows the route. For a food use, an enzyme that has no technical effect in the finished food may be exempt from ingredient declaration as a processing aid; an enzyme that remains active and functional is not. For a supplement, the panel declares the ingredient and the amount, and the three activities belong in the specification rather than in the panel. The claim is reviewed separately from both. ## Contaminants and limits Catalog limits and the market note for a supplement file | Parameter | Catalog limit | Market note | Lead | ≤3 mg/kg | EU food supplements: 3.0 mg/kg as sold | Cadmium | ≤1 mg/kg | EU food supplements: 1.0 mg/kg as sold | Mercury | ≤0.1 mg/kg | EU food supplements: 0.10 mg/kg as sold | Arsenic | ≤2 mg/kg | No general EU maximum for this matrix; the specification sets the limit | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | General food-safety duty; the customer specification may be tighter | Loss on drying | ≤5.0% | Quality parameter; it also sets the activity basis The EU ceilings apply to the supplement as sold, not to the powder. The ingredient limit has to be set so that the finished product stays under the ceiling; the brand does that calculation, and the COA is an input. For a pharmacopoeial article the monograph adds its own fat and microbial requirements. ## What the label and the claim may say No disease-related claim is made for this material, and the technical pages describe the specification and the file, not a physiological effect. “Amylase ≥25, protease ≥25, lipase ≥2 USP U/mg” is a statement about the preparation, not a health claim. A statement about what the finished product does in the body is a claim, and it belongs to the brand and to the market where it is made. The EU health-claims regulation, the US supplement rules and the retained UK regime each set their own test. The enzyme file supports identity, activity and purity; it does not support a claim. ## The document pack - Specification with the unit definitions and the assay conditions. - Batch COA with the three results, the ratio and the release limits. - Technical data sheet with activity, solubility, particle size and packing. - Safety data sheet with the dust and exposure controls. - Allergen statement covering the species and the carrier. - Species and tissue record, with the origin of the pancreas. - Carrier and composition statement. - Stability summary for the grade and the pack. - Pharmacopoeial statement if the lot is bought against the monograph. ## Compliance checklist Checks before a pancreatin lot is released to a market | Check | Evidence | Market and intended use named | Regulatory basis memo for that use | Species and tissue record | Origin statement and production record | Grade and monograph position | Specification revision and the pharmacopoeial statement where relevant | Contaminants within the destination limit | Batch COA and, where needed, a third-party report | Carrier and allergen checked | Composition statement and label artwork | Label wording checked | Three activities, units, carrier and storage statement | Claims reviewed | Claim file owned by the brand | Documents complete | The list above, in the version released with the lot The catalog position is on the pancreatin product page; the release lines are on the COA page; the source and activity evidence is on the identity page; the market frameworks are summarised in the EU and US regulatory notes; the release workflow is on the quality page. ### 06 How we prove a pancreatin lot is the declared triad URL: https://nutrition.rainwoodbio.com/products/enzymes/pancreatin/identity/ Reviewed: 2026-11-19 A pancreatin lot is identified by four agreeing measurements: the tissue and species record, the three USP activities in a declared ratio, an infrared spectrum consistent with the reference, and a mass balance that accounts for moisture, fat and carrier. No single activity identifies pancreatin, because amylase, protease and lipase can each be bought separately and added. The ratio is the part that a single-enzyme substitution cannot reproduce. In one lineIdentity for pancreatin is the three activities in the declared ratio, supported by the species record and an infrared spectrum; a single amylase number proves neither the source nor the lipase. ## The four identity layers A certificate can name the right material and still fail to prove it. The four layers below ask separate questions, and each one needs its own evidence. Identity evidence for a pancreatin lot | Layer | Question | Evidence | What it proves | Tissue and species | Is the pancreas from the named animal? | Species statement, tissue record, supplier audit | The source, not the activity | Triad | Are all three activities present, and in what ratio? | Three USP assays on one sample | A three-activity extract | Spectrum | Does the powder match the reference? | Infrared spectrum | Consistency with a reference, not purity | Mass balance | Is the powder diluted or wet? | Loss on drying, fat, carrier, activity per mg | Consistency of the numbers The layers are not alternatives. A species record without an activity result is a label, and three activities without a source record could be a blend. ## The activity ratio is the identity test The minima are 25, 25 and 2 USP U/mg, a ratio of 12.5 : 12.5 : 1 for amylase : protease : lipase. The minima are floors, not a ratio guarantee. A lot at 200, 200 and 2 passes every minimum but carries 100 amylase units per lipase unit, eight times the 25/25/2 ratio, which is a different material for any formula built on the triad. Pancrelipase makes the point from the other side: its minima are 100, 100 and 24, a ratio of about 4.17 : 4.17 : 1, so it is not a concentrated pancreatin even though it is richer in lipase. The ratio belongs in the specification with a target and a tolerance, and the certificate should print the three results beside the calculated ratio. The ratio is also the adulteration screen. Adding a single enzyme to lift the amylase or the lipase moves the ratio away from the source material. A blend of three purchased enzymes can be built to hit the triad, but it will not have the tissue record, the infrared spectrum or the fat and protein profile of a pancreas extract. ## X-ray diffraction: what it can and cannot show X-ray diffraction is not an identity test for pancreatin. The powder is a mixture of proteins and residual fat, and it is amorphous; it has no characteristic crystal pattern that a reference could match. A certificate that reports “XRD conforms” for pancreatin has not shown identity, because there is no pattern to conform to. XRD can still answer a narrow question: whether the powder is mostly crystalline carrier. A lactose or sucrose dilution shows sharp crystalline peaks, and a sample sold as pure extract that shows those peaks is a diluted material. Ask for the reference pattern, the detection limit and the sample preparation before reading a match statement. For a dilution, XRD plus the activity per milligram is more useful than either alone. ## What adulteration looks like Pancreatin substitutions and the signals | Route | What changes | Check | Dilution with lactose or sucrose | Activity per mg falls; crystalline peaks appear; loss on drying moves | Activity, XRD, carrier statement, mass balance | Single-enzyme spike | One activity rises; the ratio moves; the protein profile changes | Triad ratio, infrared spectrum, protein, source record | Another protease source | Protease passes; specificity and ratio change | Triad, infrared spectrum, side-activity panel | Water or salt | Loss on drying or ash rises; activity per mg falls | Loss on drying, ash, activity basis | Fat or spent tissue | Fat rises, odour changes, activity may fall | Fat, odour, activity, tissue record Dilution is the simplest route, and it is easy to detect when the specification asks for the ratio and the mass balance. A single-enzyme spike is harder, because the total activity can look impressive; the ratio and the infrared spectrum are the checks that expose it. The tissue record is the only layer that a blend cannot manufacture. ## How to write the identity into the specification - “Pancreatin from hog or ox pancreas, CAS 8049-47-6, with the species named.” - “Amylase ≥25, protease ≥25, lipase ≥2 USP U/mg, with the unit definitions and assay conditions.” - “A target ratio and tolerance for the three activities.” - “Identification by infrared spectrum and by the three activity assays.” - “Loss on drying ≤5.0%; fat to the monograph limit for the potency.” - “Carrier identity and inclusion; particle size ≥95% through 40 mesh.” - “Species and tissue record retained with the lot.” A specification written this way can be checked by a second laboratory and audited by a second customer. A line that reads only “pancreatin 25/25/2” cannot. ## Five questions for the supplier - Which species and tissue produced the lot, and what record ties it to the certificate? - What are the three activity results, on what basis, and by which assay and standard? - What is the ratio, and what tolerance applies to it? - What does the infrared spectrum show, and can you provide it with the reference? - What carrier is present, and what do loss on drying, fat and ash report? Five direct answers amount to an identity file. A single activity percentage does not. The catalog position is on the pancreatin product page; the certificate lines are on the COA page; the grade options are on the grade page; the methods section describes the analytical panels; the release workflow is on the quality page. ### 01 What the COA for pepsin actually contains URL: https://nutrition.rainwoodbio.com/products/enzymes/pepsin/coa/ Reviewed: 2026-11-19 A pepsin certificate reports appearance, the activity ratio or units, identification, loss on drying, the heavy-metal panel, microbiology and particle size. The activity line carries the most weight: 1:10,000 is a ratio, the haemoglobin assay produces a unit, and the two are comparable only when the method, substrate, pH and temperature travel with the number. The limits below are the catalog specification; the batch COA confirms one pack. In one lineThe 1:10,000 ratio and the haemoglobin assay are two different statements, and a certificate that shows only one of them cannot be compared with another supplier's. ## The certificate as a test report A certificate is useful when it can be audited line by line. Each row needs what was measured, the method, and the limit the lot was released against; a row that says only “conforms” asks the reader to trust a conclusion without the evidence. Pepsin is recovered from gastric mucosa, so the certificate should also name the species and tissue of origin. The activity row comes first. It should show the result, the method and the unit, and state whether the figure describes release or the end of the declared shelf life. Identification by infrared spectroscopy supports the activity measurement but does not replace it. Catalog release specification · pepsin, powder | Parameter | Method | Release limit | Appearance | Visual inspection | White to off-white, free-flowing powder | Activity (ratio) | Haemoglobin activity assay, method named on the certificate | 1:10,000 | Identification | Activity assay and infrared spectrum | Conforms to the reference | Loss on drying | Gravimetric | ≤8.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh ## The ratio, the unit and the assay conditions The 1:10,000 designation is a digestive-power ratio: one gram of the preparation digests 10,000 grams of coagulated egg albumin under the conditions of the method. That is a statement about a substrate and a procedure, not a count of catalytic events. A 1:3,000 grade and a 1:10,000 grade can be ranked on the same scale, while neither number converts into a kinetic unit. The haemoglobin assay measures something else. A diluted sample is incubated with haemoglobin at acid pH; the reaction is stopped, the undigested protein is precipitated, and the soluble products are read at 280 nm against a tyrosine standard. The result becomes a unit only after the calculation is defined. The FCC unit is the amount that releases one micromole of tyrosine equivalent per minute from a 2% haemoglobin substrate at pH 1.6 and 25 °C; the Anson unit raises the absorbance by 0.001 per minute at pH 2.0 and 37 °C. The same powder can carry different numbers under the two definitions, which is why the method, substrate, pH, temperature and calculation belong on the certificate rather than in a footnote. The moisture basis is the quiet variable: the catalog allows loss on drying up to 8.0%, so two lots at the same ratio can differ in the water they carry. Compare results on the same basis, with the measured loss on drying beside the activity. ## Release limit versus batch result The release limit is the acceptance boundary; the batch result is what the laboratory measured. Both belong on the page, in separate columns, with the method named. A result column filled with the specification wording is not a result. For a one-sided limit such as 1:10,000, a lot at 10,400 and a lot at 18,000 both pass, and they behave differently in a blend that will lose part of the activity. What the result column should contain | Parameter | Release limit | Result column | Activity | 1:10,000 by the named method | A measured ratio or unit, with conditions | Identification | Activity assay and IR conform | The spectrum and the assay report | Loss on drying | ≤8.0% | A measured percentage | Heavy metals | Per element | A figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot “Passes specification” is a conclusion. Ask for the assay's relative standard deviation where the method allows it; a result close to the floor with poor repeatability is not a comfortable margin. ## What moves between batches Pepsin starts as animal tissue, so the raw material carries more biological variation than a fermentation broth from a fixed strain. The condition of the stomachs, the extraction and precipitation steps and the drying regime all move the activity that arrives at standardisation. The final ratio is set by blending or by dilution on a carrier, which is why the carrier belongs on the certificate. Water and heat are the post-production variables. A powder dried to a higher moisture reads lower per gram, and frictional heat at the mill can destroy activity before the sieve is reached. Colour is a weak signal: an off-white shift can follow a longer dry while the assay still passes. Method drift is the quiet one. A new haemoglobin lot, a different incubation bath or a recalibrated spectrophotometer makes two results incomparable even when both certificates use the same words. The lot code on the certificate should match the pouch, the drum and the retained sample. ## When to order an outside test An independent test earns its place for a new source, a first shipment into a regulated market, a disputed result, or a label statement that rests on the activity figure. The panel can stay narrow: activity by a named haemoglobin method on a retained sample, protein or specific activity, a protein pattern by gel electrophoresis, an infrared spectrum, loss on drying, ICP-MS metals and microbiology. The laboratory must use the same substrate, pH, temperature and calculation as the specification, or the exercise compares methods rather than powders. A result in FCC units is not a second opinion on an Anson result, and neither is a second opinion on the 1:10,000 ratio. Ask for the detection limit behind each screen and the accreditation scope behind each test. Chain of custody matters: the sample tested should be the sample retained, and the report should identify the lot. The methods index lists the techniques; the quality page describes the release sequence behind the document. ## Five lines for a side-by-side review Put five lines side by side: species and tissue of origin; the activity figure with its method and conditions; protein or specific activity; loss on drying and mesh; and the heavy-metal, microbiology and carrier statements. Two quotations that agree on “1:10,000” but differ on method or moisture basis are not describing the same powder. Traceability comes next. The certificate should say who manufactured the lot and which standardisation step set the ratio. The catalog specification sits on the pepsin product page. The checks that separate a genuine lot from a diluted one are on the identity page; the ratio and form choices are on the grades page. ### 02 Pepsin 1:10,000 or 1:3,000: choosing a grade URL: https://nutrition.rainwoodbio.com/products/enzymes/pepsin/grades/ Reviewed: 2026-11-19 Grade choice for pepsin comes down to three variables: the ratio, the material that carries it and the particle form. The catalog standard is a 1:10,000 powder at 40 mesh; a granulated version is available on request, and a lower ratio such as 1:3,000 is a different specification. Each choice changes the mass needed for the same digestive power and what else enters the formula. In one lineA pepsin grade is a ratio plus the material that carries it, so the mass needed for the same digestive power moves when the ratio moves. ## No purity figure exists for an enzyme An enzyme preparation is not a pure compound. It contains the enzyme, other proteins and whatever carrier was used to set the final activity. No single percentage describes that mixture, so the trade describes a pepsin grade by its ratio, its source and its form instead. The ratio is the oldest of those descriptors. 1:10,000 means one gram digests 10,000 grams of coagulated egg albumin under the conditions of the method; 1:3,000 means 3,000 grams. The figures can be compared with each other because they come from the same kind of measurement, but they are not units and they do not convert into a haemoglobin result. What the grade controls | Choice | What it sets | Where it bites | Ratio | Digestive power per gram | Charge weight and overage | Carrier | What the enzyme is diluted on | Ingredient list, moisture pick-up, flow | Mesh | Particle size and surface | Mixing, wetting, airborne dust | Form | Powder or granule | Dust control, dispersion time, process loss | Source | Species and tissue of origin | Identity file and market documents ## The grades in the catalog The catalog standard is the 1:10,000 powder. Granulation is offered on request, and a dilution to an agreed ratio is quoted as a separate specification rather than a packing option. Catalog options and the formula consequence | Option | Activity | Form | Consequence for the formula | Standard powder | 1:10,000 | 40 mesh powder | Lightest charge for a given power; made for dry blends | Granules | 1:10,000 | Granulated | Less dust; slower wetting; check process loss | Dilution | Agreed in the specification | Powder | Heavier charge; more carrier on the label None of these figures can be compared across unit systems. The 1:10,000 ratio and an Anson or FCC unit describe different assays, as the COA page sets out. A certificate that prints one number without its method has not told the buyer which of them was measured. ## Mesh, flow and dust At ≥95% through 40 mesh, roughly 420 µm, the powder mixes evenly into a dry blend and wets quickly in water, giving the acidic solution the specification describes. The same fines that speed wetting stay airborne. Enzyme dust is a respiratory sensitiser, so extraction, closed transfer and a suitable mask belong in the handling plan, and the safety data sheet carries the hazard language. Granules trade wetting speed for a cleaner room. They are the better choice where operators handle kilos a day; they are the wrong choice for a stick pack that must disperse quickly. Granulation adds water and heat, so the activity of the granule has to be measured after the step rather than calculated from the powder that went in. Pepsin is hygroscopic. A 40 mesh powder left open in a humid room picks up water, and the loss on drying climbs toward the 8.0% limit. Keep the pouch sealed and the drum liner closed, and let a cold pack equilibrate before opening it. ## Working out the charge weight Begin with the digestive power the batch needs. If both grades are measured by the same ratio method, the mass scales inversely with the ratio: 1 kg of 1:3,000 carries the same power as 0.3 kg of 1:10,000, so replacing 1 kg of the 1:10,000 grade with the 1:3,000 grade takes 3.33 kg. The arithmetic holds only while the method is the same; confirm that before using the factor. If the specification is written in units rather than a ratio, dose from the units and set the ratio aside. A ratio cannot be converted into Anson or FCC units without the method that produced both figures, and a supplier who offers a factor should show the underlying data. Weighing decides the rest. The 1:10,000 powder is weighed in small charges, and a pilot batch may struggle with the precision. A dilution buys precision with carrier, which then has to be declared and dispersion-tested like any other ingredient. ## Turning the choice into specification lines - “Pepsin from gastric mucosa, species stated; CAS 9001-75-6; EC 3.4.23.1.” - “Activity 1:10,000 by the named ratio or haemoglobin method, with the conditions.” - “Unit result if one is reported, with the unit definition.” - “Protein or specific activity, where the buyer uses it to detect dilution.” - “Loss on drying ≤8.0%; particle size ≥95% through 40 mesh.” - “Carrier identity; heavy metals; microbiology as listed.” - “Form: powder or granulated; storage statement and labelled basis.” A line that cannot be measured at goods-in does not belong in a purchase specification. Keep the method appendix under change control, because a new haemoglobin lot or a re-made standard changes the comparison even when the specification wording stays the same. The specification glossary entry covers the vocabulary. ## When a dilution works against you A blend already near its carrier ceiling gains nothing from more diluent. A formula that has no room for more water gains nothing from a carrier that binds it. A short ingredient list gains nothing from a line that exists only to make the scoop heavier. Scale adds another case. A dilution that solves a pilot weighing problem becomes an extra material to test, declare and store once the batch is large enough to weigh the concentrate directly. Choose the grade for the batch you will run most often, not for the trial. Catalog values are on the pepsin product page; the release tests are on the COA page; how each form holds activity is on the stability page; pack sizes and lead time are on the MOQ page. ### 02.1 Pepsin vs pancreatin: one protease against a triad URL: https://nutrition.rainwoodbio.com/products/enzymes/pepsin/grades/pepsin-vs-pancreatin/ Reviewed: 2026-11-19 Pepsin is a single aspartic protease that works at acid pH; pancreatin is a pancreatic extract that carries amylase, protease and lipase and works near neutral pH. Pepsin is sold on a 1:10,000 ratio, pancreatin on three USP units per milligram, and the figures do not convert. The two are not interchangeable, and a blend that contains both has to declare each one on its own terms. In one linePepsin is one acid protease measured by a ratio, pancreatin is a three-enzyme extract measured in three USP units, and neither figure converts into the other. ## One enzyme against a triad Pepsin is an aspartic endopeptidase with two catalytic aspartate residues in a bilobal structure. It cleaves peptide bonds next to aromatic and hydrophobic residues, and it is built to work in the acid environment of the stomach. Its specificity is narrow and its pH window is low, which is what the 1:10,000 ratio and the acid haemoglobin assay describe. Pancreatin is not a single enzyme. It is an extract of pancreatic tissue that carries a protease group — trypsin, chymotrypsin and the carboxypeptidases — together with alpha-amylase and lipase. The USP specification names the three activities, and the ratio between them is the product. A pancreatin that is high in total activity but wrong in that ratio is a different material, even when the label uses the same word. Pepsin and pancreatin on the lines that matter | Line | Pepsin | Pancreatin | Composition | One aspartic protease | Protease group, amylase and lipase | CAS number | 9001-75-6 | 8049-47-6 | Enzyme class | EC 3.4.23.1, aspartic endopeptidase | Trypsin EC 3.4.21.4, chymotrypsin EC 3.4.21.1, amylase EC 3.2.1.1, lipase EC 3.1.1.3 | Activity basis | 1:10,000 ratio; haemoglobin assay | ≥25 USP U/mg amylase, ≥25 USP U/mg protease, ≥2 USP U/mg lipase | Assay substrate | Haemoglobin at acid pH | Starch, casein and olive oil at near-neutral pH | Working pH | Acid, around pH 2 | Near neutral ## A ratio, a unit and a triad The pepsin figure is a ratio of substrate to enzyme. 1:10,000 means one gram digests 10,000 grams of coagulated egg albumin under the method's conditions. The haemoglobin assay adds a second axis, in FCC or Anson units, and the two axes are not the same measurement. The pepsin COA page explains how each is reported. The pancreatin figure is a set of three unit counts. One USP unit of amylase is defined by the starch hydrolysis rate, one unit of protease by the casein hydrolysis rate, and one unit of lipase by the olive oil hydrolysis rate; each is fixed by its own substrate, pH and calculation. The specification is met only when all three floors are met and the ratio between them is in range. Nothing converts between these systems. A protease result of 25 USP U/mg for pancreatin is not 25,000 of any pepsin figure, and the 1:10,000 ratio is not a number of units. A formulator who needs both enzymes doses each one against its own certificate, from its own assay, and never adds the two into a single “protease activity” line. ## The pH decides where each one works Pepsin is active at acid pH and loses activity as the pH rises; above the acid range the loss becomes irreversible. Pancreatin works near neutral, and acid inactivates it. That single difference explains most of the formulation behaviour: an acid vehicle protects pepsin and destroys pancreatin, while a neutral vehicle does the reverse. A dry blend avoids the problem because the enzymes are not in solution. Once the product is dispersed, the local pH decides which enzyme survives. A combination product that is meant to deliver both has to deal with the acid step — usually by protecting the pancreatic enzymes through the acid environment — and the formulation work belongs to the dosage form, not to the certificate. The assay follows the same logic. A pepsin assay run at pH 2 does not measure pancreatin protease, which is inactive there, and the pancreatin protease assay at neutral does not measure pepsin. The selectivity is useful, but it also means a blended product needs a method that recovers each activity from the matrix. ## What the label and the specification must say Pepsin is declared by its name, its source and its activity. The species and tissue of origin belong on the specification, because animal-derived pepsin and a fermentation protease with a similar pH profile are different materials. “Protease” alone does not identify either one. Pancreatin is declared as pancreatin, with the three activities and their units. The ratio is part of the identity, so a label that names only a total protease figure has left out what makes pancreatin pancreatin. In a blend, list each enzyme and its activity on its own line; a combined “enzyme blend” figure cannot be checked against either specification. The label, the specification and the certificate should use the same numbers. A ratio on the label and a unit count on the certificate are not a presentation choice; they are two different claims about the same powder. ## Putting both in one product Combination products are common, and they are legitimate when each component is specified, assayed and declared. The certificate should show the pepsin activity by its method and the pancreatin triad by the USP methods, with the lot code tying both to the blend. A single activity figure for the blend is not enough. The physical form matters. A dry powder blend keeps both enzymes stable as long as moisture is controlled. An aqueous concentrate cannot hold both at their working pH, and a two-chamber pack or a coated bead is the usual way around the conflict. Each of those is a separate stability question, and the pepsin stability page sets out the acid-side behaviour. Overages are separate too. An overage on pepsin does not protect the lipase, and an overage on pancreatin does not restore the pepsin. Each activity is dosed and overaged on its own evidence. ## Choosing between them Start with the pH the enzyme will see and the activities the formula needs. An acid step points to pepsin; a neutral step with starch, protein and fat points to pancreatin. If the formula needs lipase or amylase, pepsin cannot supply them. If it needs an acid protease, pancreatin cannot replace it. The second question is the unit system the buyer can verify. A pepsin buyer needs the ratio method and the haemoglobin conditions; a pancreatin buyer needs the three USP assays and the ratio between them. A supplier who offers one number for both products has not understood either specification. The catalog entries are on the pepsin and pancreatin product pages. The neutral enzyme is a third option when the pH is near 7 but the formula needs a single protease rather than a triad: see neutral protease. The pepsin grades page covers the ratio choice, the method notes describe the assays, and the quality page describes the release file. ### 03 Pepsin loses activity to heat and moisture; the pack decides the shelf life URL: https://nutrition.rainwoodbio.com/products/enzymes/pepsin/stability/ Reviewed: 2026-11-19 Pepsin is a protein, and its activity falls when the protein unfolds. Heat and moisture drive that loss in the powder; in solution, pH is decisive, because pepsin works in acid and loses activity as the pH rises toward neutral. The retest period comes from stability data on the pack and condition that will actually be used, not from a generic figure attached to the certificate. In one linePepsin is a protein: heat and moisture denature it, acid pH protects it and alkaline pH ends its activity, so the pack and the matrix set the shelf life. ## The powder: moisture, heat and the pack Loss on drying is capped at 8.0% at release. That figure is a gate, not an allowance for storage: the powder is hygroscopic, and an opened pouch in a humid room will move toward the cap. As water rises, the activity per gram of powder as sold falls, even if the enzyme that remains is still intact. Heat is the second driver. A sealed pack in a normal warehouse is usually acceptable; a loading bay, a vehicle or a greenhouse is not. The loss rate climbs with temperature, so a lot held warm for a season can miss an assay that passed at release. The pack is part of the specification. The 1 kg foil pouch and the 25 kg fiber drum both depend on a seal and a liner; the drum's liner is the moisture barrier, and a pouch folded over is not resealed. Note the opening date and finish the remainder within the stated in-use period. ## The solution: acid keeps it, neutral ends it Pepsin dissolves in water to give an acidic solution, and the acidity is part of its working condition. The enzyme is active near pH 2 and loses activity as the pH rises; above the acid range, the unfolding becomes irreversible, so a neutral or alkaline solution does not recover when the pH is brought back down. A solution adds failure modes that a powder does not have: dilution, freeze-thaw, shear and foaming at a pump or stirrer, and autolysis at acid pH and elevated temperature. A concentrated stock holds better than a dilute one, and a clear bottle left on a bench is not where a hold belongs. If a liquid is unavoidable, keep it acid, keep it cold, limit dissolved oxygen and metal contact, and validate the hold time in the matrix. A result on the bulk powder does not carry over to a beverage. ## What drives degradation Factors that move pepsin activity during storage | Factor | What it does | Control | Heat | Unfolds the protein; activity falls | Cool store; short heat exposure in process | Moisture | Raises loss on drying; lowers as-is activity | Sealed pouch; closed drum liner | pH | Acid range keeps activity; neutral and alkaline inactivate | Acid matrix; check the reconstituted pH | Autolysis | Pepsin digests itself in acid solution | Low temperature; short hold; concentrated stock | Shear and foam | Surface denaturation at pumps and mixers | Low-shear transfer; avoid over-mixing | Time | Every rate above accumulates | Assigned retest period; retained sample These factors interact. A warm, humid store is worse than either condition alone, and an acid solution held warm combines autolysis with thermal unfolding. The useful question is not whether pepsin is stable in general, but how long it holds in this pack, in this matrix, at this temperature. ## A stability protocol for the ingredient A workable design holds the sealed pack at 25 °C/60% relative humidity for the long term, adds 30 °C/65% relative humidity as an intermediate condition, and uses 40 °C/75% relative humidity to stress the pack. A light arm can be added for transparent pack components, but heat and moisture are the priority here. At each point, measure activity, loss on drying, appearance, identity and microbiology. For a stick pack or a liquid, repeat the work in the matrix at the process pH and heat load. Report the individual results, not only a pass statement, and identify the pack and the lot family. Request the summary for the pack you will buy. A drum and a pouch differ in headspace and in how often they are opened, so the data belongs to the pack that generated it. ## The finished formula changes the answer A capsule or tablet has low water activity, but the shell and the excipients can still move moisture into the fill. Measure loss on drying at release and again after storage, and inspect the fill as well as the powder. A stick pack depends on the seal and the foil; a pinhole is a failure, so inspect the strip. Once the product is dissolved, the blend pH decides. An acidic active such as ascorbic acid or citric acid sits in pepsin's range; an alkaline component can push the local pH above the working window. Measure the pH of the reconstituted product at the start and after storage. The dosage form decides where the enzyme is released, and that is a formulation choice. An overage is a label and stability decision, and it cannot compensate for a pack that lets moisture in. ## How the shelf life is set We do not publish one shelf-life number for pepsin, because the pack and the storage condition set it. The assigned retest period is written on the specification and backed by the stability file for that pack. A figure quoted without a pack, a condition and a test panel is an assertion, not a shelf life. At the end of the retest period, re-assay the retained sample before extending use. Do not extend by assumption, and do not apply a bulk figure to a repack. The product hub lists the standard packs; the COA page covers release testing; the MOQ page covers pack and lead time; the quality page describes the release and retained-sample workflow. ### 04 Pepsin: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/enzymes/pepsin/moq/ Reviewed: 2026-11-19 The minimum order for pepsin is 1 kg, packed in a foil pouch; the bulk pack is a 25 kg fiber drum. Standard material is quoted at 1–7 days from confirmation. To turn that into a firm quotation, we need the ratio and assay method, the specification, the quantity and pack, the destination and Incoterm, the documents required, and the market where the finished product will be sold. In one lineThe 1 kg pouch is the smallest order because it is the smallest unit that can be assayed, retained and traced as one lot. ## Why the minimum is one kilogram The minimum is set by what has to happen to a lot before it can be used, not by a round number. A buyer qualifying a new source needs enough powder to run an activity assay, a moisture test and a microbiology panel, and to keep a retained sample for the life of the project. One kilogram covers that work and still leaves material for a bench trial. A smaller quantity is possible only by splitting a larger lot. Once a pack is opened and divided, the original seal, the original fill weight and the original lot identity no longer describe what the buyer holds. What the split loses is traceability, which is the part of the purchase that is hardest to replace. A 25 kg drum is the production unit. It cuts handling per kilogram and the number of containers in the warehouse, but it also commits inventory to one lot and one storage period. Buy the drum when the batch is planned, not in anticipation of one. ## Packs and formats Pepsin packs and what each one asks of the buyer | Pack | Net weight | Typical use | What to plan for | Foil pouch | 1 kg | Qualification, trial, small batch | Moisture barrier; finish within the in-use period after opening | Fiber drum | 25 kg | Production campaign | Inner liner; record the opening date | Granulated powder | On request | Dust control and flow | Activity measured after granulation; particle profile changes | Diluted powder | On request | Lower activity per gram | Carrier declared; quoted as a separate specification Every pack is a 40 mesh powder unless a granulation or dilution is agreed. Those two are specification changes: the particle-size line moves, the carrier line moves, and release testing is run on the changed material. Raise them with the enquiry rather than after the order. ## Lead time and dispatch Standard material is quoted at 1–7 days from confirmation. The clock starts when the order and the documents are agreed, and it stops at dispatch; freight transit, import clearance and the buyer's own quality release sit outside it. A granulation, a dilution or a special pack is made to order and takes longer, and the quotation should show that as a separate line. For planning, ask for the dispatch date rather than the lead time alone. A 1 kg pouch usually moves as a parcel and a 25 kg drum as a pallet; the Incoterm decides who arranges the movement and who clears it. The certificate, packing list and other documents should be ready when the goods are, so the lot is not held at the port for paperwork. ## What a quotation needs Six details make a quotation comparable: - Product and activity. Pepsin, with the ratio and the assay method written out. - Specification. Species and tissue, carrier, loss on drying, mesh, heavy metals and microbiology. - Pack. 1 kg pouch or 25 kg drum, or a granulated or diluted variant. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, specification, SDS, species and origin statement, TSE and animal by-product declarations, and any customer-specific form. - Intended use and market. Supplement, food or another use, and the country of sale. A quotation that omits the ratio or the market cannot be checked: the same powder can fit one destination and not another, and the documents are part of what is being bought. Commercial terms are given on the quotation, not on this page. ## The sample is a lot, not a demonstration The 1 kg pouch is the qualification sample. Run activity, loss on drying, identity and microbiology on it before the scale-up, and keep a portion under the same lot code. The pack, the certificate and the retained sample should carry one code; if they do not, the sample is not evidence for the delivery. If the bench trial needs less than a kilogram, ask for a split and record it as a repack. Do not use a split as the catalog pack, and do not assume it shares a lot with the production drum. Ask which lot the split came from and keep that code with the trial results. ## Terms to settle before the first order Before the first production order, put the quality terms beside the commercial ones: the specification revision, the COA per lot, the retained sample, the retest period, and the route for a change of source, carrier or process. An agreement signed before the order is easier to apply than one negotiated after a failure. If a lot does not meet the agreed specification, the retained sample and a joint re-test are the way to settle it. Agree in advance which laboratory is acceptable and who carries the referee test; a photograph of the powder is not a result. The product hub holds the catalog specification; the COA page explains the release tests; the compliance page covers the market files; the MOQ glossary entry defines the term; the quality page describes the release file. ### 05 The regulatory file for pepsin URL: https://nutrition.rainwoodbio.com/products/enzymes/pepsin/compliance/ Reviewed: 2026-11-19 Pepsin is an animal-derived food enzyme, and its regulatory file is built around the exact preparation: the species and tissue of origin, the carrier, the activity method and the use. The specification and the batch certificate describe the material. The file adds the market route, the contaminant limits and the label rules for the destination, and the buyer's regulatory team confirms that route for the finished product. In one linePepsin is an animal-derived enzyme, so the file has to show the source, the food-enzyme route and the label for the destination, not only an activity figure. ## What the file has to define The EU definition covers any product of plant, animal or microbial origin that contains one or more active enzymes and is put into food to do a technological job. A preparation adds the substances needed to store, sell, standardise, dilute or dissolve it. The unit being assessed is therefore this species, this tissue, this carrier and this use, not the word “pepsin” on its own. Because pepsin comes from gastric mucosa, the file carries an animal-origin section that a fermentation enzyme does not need. The species and tissue statement, the animal by-product declaration and the TSE statement sit beside the specification. A new species, tissue, carrier or intended use means a fresh assessment, so those four items are fixed in the specification rather than left to the certificate. ## European Union: framework and the pending list Regulation (EC) No 1332/2008 supplies the authorisation framework; Regulation (EC) No 1331/2008 sets the procedure, and Commission Regulation (EU) No 234/2011 adds the implementing detail. Work on the Union list of authorised food enzymes is still in progress, and as of this review no list has been adopted, so national provisions continue to apply during the transitional period. When the list takes effect, use will be confined to the entries it contains. That makes “pepsin is permitted in the EU” too broad a statement to put in a file. The question a reviewer can answer is which entry covers the preparation, from which species and tissue, in which food and at what level — and the answer has to come from the current text rather than a supplier's summary. Directive 2002/46/EC deals with food supplements, but its harmonised lists cover vitamins and minerals, not enzymes. The enzyme therefore needs a food-enzyme or food-ingredient basis; a supplement label is not that basis. Labelling follows Regulation (EU) No 1169/2011 and the food-enzyme rules, which call for the enzyme name, the activity and the storage conditions. ## United States: which basis is claimed There is no premarket approval list for food enzymes as such. A preparation can be marketed under a GRAS conclusion, as a processing aid, or, in a supplement, on a DSHEA basis: a history of sale before 1994, a notified new dietary ingredient, or a GRAS position. Ask the supplier which basis it claims and for the document behind it; the buyer then confirms that the basis reaches the finished product. The label follows from the basis. If the enzyme still acts in the finished food, it is an ingredient and is listed by common name under 21 CFR 101.4. If it works only during manufacture and leaves no technical effect at an insignificant level, 21 CFR 101.100(a)(3) classifies it as a processing aid. The hazard analysis under 21 CFR 117 turns on the same distinction. Two checks sit outside the activity line: whether the enzyme or its carrier raises an allergen declaration, and whether the lead figure calls for a California Proposition 65 evaluation. The certificate alone settles neither. ## Contaminants and limits The catalog sets Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg, with APC ≤1,000 cfu/g, yeast and mould ≤100 cfu/g, and E. coli and Salmonella absent. Those are limits on the powder. The limits that are enforced apply to the food as sold, and the bridge between the two is the inclusion rate. Powder limits and where the legal limit sits | Contaminant | Catalog limit | Legal reference to check | Lead (Pb) | ≤3 mg/kg | EU 2023/915 — food supplements, 3.0 mg/kg | Cadmium (Cd) | ≤1 mg/kg | EU 2023/915 — food supplements, 1.0 mg/kg | Mercury (Hg) | ≤0.1 mg/kg | EU 2023/915 — food supplements, 0.10 mg/kg | Arsenic (As) | ≤2 mg/kg | No harmonised EU supplement limit; the buyer sets one | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Finished-product specification, not a legal maximum | Activity | 1:10,000 by the named method | No legal limit; the method defines the figure A metal result that passes on the powder can still be too high in a product that uses a large percentage of it: the intake is the concentration times the amount eaten. Run that calculation for the finished dose, not just for the drum. The methods index covers the metal panel and the assay techniques. ## Where the label has to stop Enzyme activity is a process parameter. It is not a nutrient with a reference intake or a daily value, so there is no number to declare against. A label may name the enzyme, its source and its activity, and may describe the technological job it does in manufacture. It must not present that activity as an effect on the person who takes the product. The same boundary applies to these pages. No health, structure-function or disease-related claim is made for pepsin. In the EU, health claims are governed by Regulation (EC) No 1924/2006; in the United States, a structure-function statement is a DSHEA notification decision for the brand. The editorial policy records the position. ## Documents and their authors The file a pepsin buyer should hold | Document | Issuer | What it proves | Batch certificate | Manufacturer | Activity result, method, contaminants, lot | Specification sheet | Manufacturer | Release limits, ratio method, source and carrier | Safety data sheet | Manufacturer | Hazards, dust controls, transport classification | Species and tissue statement | Manufacturer | Animal origin and the starting material | TSE and animal by-product declaration | Manufacturer | Feed-ban and by-product status of the source | Allergen and carrier statement | Manufacturer | Carrier identity and allergen risk | GMO statement | Manufacturer | Whether any input is modified | Basis statement | Supplier or regulator | The route relied on in the destination market ## Six questions for the file Ask for the species and tissue; the ratio and the method that produced it; the carrier; the market route or basis, with a reference; the contaminant limits and the method behind each; and the label wording in the language of the destination. A file that answers all six can be reviewed in one pass. A file that answers three will produce a long correspondence. The source and activity answers are worked through on the identity page; the lot certificate on the COA page; packaging and document flow on the MOQ page; the catalog specification on the pepsin product page. ### 06 How we prove a pepsin lot is the named enzyme URL: https://nutrition.rainwoodbio.com/products/enzymes/pepsin/identity/ Reviewed: 2026-11-19 A pepsin lot is the named enzyme when four lines agree: the document names the species, tissue and CAS number; the activity assay gives the declared ratio under a named method; the protein pattern shows a band of the expected size; and the lot code matches the pack, the certificate and the retained sample. No single line carries the proof. The activity figure is the easiest to produce and the easiest to imitate. In one lineIdentity is the ratio plus the assay behind it, a protein band of the right size and a lot code that matches the pack. ## The four identity layers A certificate can name the right material and still fail to prove it. The layers below are separate questions, and each one needs its own evidence. A supplier who answers only the first has described the paperwork, not the powder. Four layers of pepsin identity | Layer | Question | Test | What it proves | Document | Is the source named? | Species, tissue, CAS 9001-75-6, EC 3.4.23.1 | Paperwork only | Activity | Does it digest protein at acid pH? | Haemoglobin assay with stated conditions | A functional acid protease | Protein | Is the protein the expected one? | Gel electrophoresis, specific activity, infrared spectrum | The protein, not just an activity | Trace | Is this the tested lot? | Lot code on pack, COA and retained sample | Connection to the delivery The functional assay is the strongest single check because an inactive or substituted protein usually fails it. It is not sufficient on its own: another acid protease can pass an activity assay at pH 2, and a diluted powder can be adjusted to the declared ratio. The protein and the document close those gaps. ## The ratio is not a purity figure The 1:10,000 designation states that one gram digests 10,000 grams of coagulated egg albumin under the conditions of the method. It is a digestive-power ratio, and it says nothing about how much of the powder is pepsin. A preparation can reach 1:10,000 by concentrating the enzyme or by diluting a stronger concentrate on a carrier; the ratio is the same and the powder is not. The haemoglobin assay is the other axis. It measures the release of acid-soluble products at a stated pH, temperature and time, and it becomes a unit only after the calculation is defined. The FCC unit, the Anson unit and the 1:10,000 ratio are three different statements, and none of them converts into another without the method that produced it. The COA page sets out how each is reported. pH is part of the identity, not only the assay. Pepsin is active in acid and loses activity as the pH rises toward neutral; an assay run at the wrong pH measures a different enzyme preparation. Ask for the pH, the substrate and the temperature beside the number, and compare only results produced the same way. ## X-ray diffraction: what it cannot tell you X-ray diffraction is a solid-state method for crystalline materials. A crystalline salt gives sharp reflections that act as a fingerprint; the commercial pepsin powder is amorphous, so its pattern is a broad halo rather than a set of peaks. That means XRD is not an identity test for the enzyme. A certificate that reports “XRD conforms” for pepsin has not shown the protein. The method still has a use. It can detect a crystalline carrier or adulterant, such as a sugar or a salt, and it can show that a sample described as crystalline is not. Those are useful negative checks. They do not replace the activity assay, the infrared spectrum or the protein pattern, and they should not be sold as identity evidence for the enzyme itself. For a disputed lot, ask for the actual pattern and the reference rather than a conformity statement. Then ask what the reference was: a pepsin standard, a carrier, or nothing that matches the sample. ## What adulteration looks like Failure signatures and the test that reveals each | Failure | Signature | Test | Dilution with carrier | Ratio met, protein per gram low | Paired activity and protein; specific activity | Heat-damaged lot | Normal protein, low activity | Activity against protein; infrared spectrum | Another acid protease | Plausible acid activity, different behaviour | pH profile, protein pattern, pepstatin inhibition | Species substitution | Activity similar, source different | Species-specific immunoassay; protein pattern | Moisture pickup | Loss on drying high; as-is activity low | Loss on drying beside the activity | Lot mix-up | Codes do not meet across documents | Lot code on pack, COA and sample Dilution and heat damage pull the numbers in opposite directions, so the pair of figures separates them: a low ratio with normal protein points to inactivation, while a normal ratio with low protein points to a carrier. Substitution is harder. A pH-activity profile and a protein pattern are the practical screens, and a species-specific test is the direct check when the label names the species. ## Specification lines that can be tested - “Pepsin from gastric mucosa, species and tissue stated; CAS 9001-75-6; EC 3.4.23.1.” - “Activity 1:10,000 by the named ratio or haemoglobin method, with pH, temperature and time.” - “Unit result if reported, with the unit definition.” - “Protein or specific activity, where identity against dilution is to be checked.” - “Identification by activity assay and infrared spectrum against a reference.” - “Loss on drying ≤8.0%; particle size ≥95% through 40 mesh; carrier named.” - “Heavy metals and microbiology as listed; storage statement.” Write the activity as a specification with a method appendix, and keep the appendix under change control. A new haemoglobin lot or a re-made standard can move the comparison even when the wording on the certificate stays the same. ## Five questions for the supplier - Which species and tissue is this lot from, and where is that stated? - What does 1:10,000 mean in your method, and what are the substrate, pH, temperature and time? - What are the activity, protein and specific activity of this lot? - What test shows that the powder is not a dilution, and will you run it? - Which document carries the lot code that matches the pack? Written answers to all five give a buyer something to audit. The catalog values are on the pepsin product page; the release tests are on the COA page; the assay conditions are described in the method notes; the release workflow is on the quality page. ### 01 What the COA for serratiopeptidase actually contains URL: https://nutrition.rainwoodbio.com/products/enzymes/serratiopeptidase/coa/ Reviewed: 2026-11-19 A serratiopeptidase certificate is readable only when the activity line carries its method: the casein Folin assay, the assay pH, the temperature, the incubation time and the unit definition. The catalog specification is ≥20,000 U/g, with identification, loss on drying, heavy metals, microbiology and particle size released against the limits below. The batch COA confirms those limits for a particular pack; it does not turn the catalog figure into a result. In one lineA serratiopeptidase figure in U/g is a rate on casein under named conditions, so the certificate has to carry the unit definition, the substrate and the assay pH beside the number. ## Reading the certificate line by line One row on this certificate decides the sale and several decide whether the powder can be used. Activity is the commercial parameter; identification decides whether that activity belongs to the named enzyme; moisture, metals and microbiology decide whether the lot can be released. Each row needs the method beside the limit, because “conforms” is a conclusion rather than a measurement. Release specification · serratiopeptidase powder | Parameter | Method | Release limit | Appearance | Visual | White to off-white, free-flowing powder | Identification | IR spectrum and activity assay | Conforms to the reference | Serratiopeptidase activity | Casein substrate, Folin-Ciocalteu colour | ≥20,000 U/g | Loss on drying | Gravimetric | ≤5.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh The identification row deserves a second look. An IR spectrum of a protein is dominated by the amide bands, and the activity assay responds to any protease that hydrolyses casein. Together they are a reasonable release gate, but neither one alone separates serratiopeptidase from a blend of other proteases. The identity page describes the tests that do. ## What the U/g figure measures A unit per gram is a rate, not a concentration. In the casein Folin assay the enzyme is incubated with casein, the reaction is stopped, and the soluble peptides are coloured with Folin-Ciocalteu reagent and read against a tyrosine standard. One unit is the amount of enzyme that releases 1 µg of tyrosine per minute under the conditions the method names. The pH, the temperature and the incubation time therefore sit inside the definition, not outside it. Method sheets in circulation do not all use the same conditions, so the same nominal figure can describe different amounts of activity. The table shows three definitions in circulation; none is wrong, and none converts into another by arithmetic. Three unit definitions in circulation for serratiopeptidase | Assay conditions | Unit definition | Consequence | pH 7.5, 30 °C | 1 µg tyrosine released per minute from casein | Lower temperature, slower rate | pH 7.4, 37 °C | 1 µg tyrosine released per minute from casein | A different point on the pH and temperature curve | pH 8.0, 37 °C | 1 µg tyrosine released per minute from casein | A third rate, on the same substrate The result is normally reported per gram of preparation as sold, not per gram of protein. A powder at 20,000 U/g that contains little protein is not the same material as a powder at the same figure built on more enzyme and less carrier. State whether the figure is per gram as sold or corrected for moisture, and put the loss on drying beside it so the reader can see the basis. ## Limit, method and measured result The limit is the acceptance boundary. The result is what the laboratory measured on that lot. Both belong on the page, in separate columns, and the method belongs next to them. A result column filled with the specification range is not a result; it is a copy of the gate. What the batch result column should contain | Parameter | Release limit | Result column | Activity | ≥20,000 U/g | A measured figure with the method and unit definition | Identification | Conforms | The IR spectrum reading and the activity result behind the statement | Loss on drying | ≤5.0% | A measured percentage | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot | Particle size | ≥95% through 40 mesh | The measured percentage through the sieve For an enzyme the activity result is the line that can fail while everything else passes. Moisture, metals and microbiology are contamination gates; activity is the product itself. A certificate that reports activity without the method has told the buyer the number but not what it means. ## Lot-to-lot variation Fermentation, recovery and drying move the activity. The producing organism is Serratia marcescens, and the fermentation yield depends on the strain, the medium and the run. Downstream steps concentrate or dilute the enzyme, and the final standardisation sets the units per gram. Standardisation often means blending fermentation batches to a declared activity. That is legitimate, and it makes homogeneity and sampling part of the release decision: a blend has to be uniform enough that the sample tested represents the pack. The certificate should identify the blended lot, and the retained sample should come from the same blend. Colour is a weak signal. White to off-white covers a wide range, and a slightly darker powder can still meet every chemical line. The trend across lots is more useful than one reading: activity drifting toward the floor, loss on drying climbing, or a new band on a protein gel. The lot code on the certificate should match the pouch, the drum and the retained sample. ## When an outside laboratory is warranted Order an independent test for a new source, a first shipment into a regulated market, a suspected blend, or a disputed result. The useful panel is activity by the same method the specification names, protein content, SDS-PAGE for the molecular-mass band, IR for the reference spectrum, loss on drying, the heavy-metal panel and microbiology. Protein content plus activity gives the specific activity; that ratio is the quickest check on a dilution. Ask the laboratory to state its detection limit and its recovery for each screen. A “not detected” line without a limit is evidence about the method, not about the sample. Chain of custody matters. The sample tested should be the sample retained, and the report should name the lot. ## Six lines for a supplier comparison Put six lines side by side: name, CAS number, EC number and source organism; activity with the method and unit definition; identity evidence, including the IR reading and the protein band; loss on drying; heavy metals and microbiology; pack size and lot code. Two quotations that agree on “20,000 U/g” but differ on the method are not describing the same powder. The second layer is traceability. The certificate should say who made the lot, which strain and process were used, whether a carrier was added, and which milling step produced the 40 mesh powder. The catalog specification sits on the serratiopeptidase product page; the unit definition is set out on the methods page; the release workflow is described on the quality page. The grades page explains what changes when the activity per gram changes. ### 02 Serratiopeptidase grades: units per gram and what carries them URL: https://nutrition.rainwoodbio.com/products/enzymes/serratiopeptidase/grades/ Reviewed: 2026-11-19 Serratiopeptidase is sold by declared activity, not by purity. The catalog grade is a white to off-white powder at ≥20,000 U/g by the casein Folin assay, with ≥95% through 40 mesh and a granulated form available on request. The grade decision is the activity per gram, the material that carries it and the physical form the process can handle. In one lineTwo powders can both be labelled serratiopeptidase and still differ in units per gram, carrier, mesh and the process step their activity survives. ## Why an enzyme is not sold as a percentage A mineral salt can be sold at 98% or 99% because the assay weighs the molecule against everything else in the drum. An enzyme preparation cannot be described that way. The powder contains the enzyme, the remains of the fermentation and any carrier used to standardise the activity, so the useful description is a declared number of units per gram plus the identity of what carries them. Standardisation is the step that creates a grade. The fermentation and recovery steps produce a concentrate, and the concentrate is either sold as it is or diluted to a declared activity. Two powders at the same units per gram can therefore hold different amounts of enzyme protein, and two powders with the same protein content can be sold at different activities. Both facts matter when a formula is built around a fixed fill weight. The unit definition travels with the grade. A preparation at 20,000 U/g by one method and a preparation at 20,000 U/g by a method with a different pH or temperature are not the same article, even when the certificates look alike. The assay glossary sets out why the substrate and conditions belong in the specification. ## What a grade fixes, and what moves when it changes A grade is a bundle of properties rather than a single number. The first table lists what the bundle contains; the second lists what a switch actually changes in the formula. Properties that a serratiopeptidase grade fixes | Property | What it controls | Where it shows up | Activity (U/g) | Units delivered per gram of powder | Fill weight, capsule size, label declaration | Carrier | What the activity is standardised on | Ingredient list, excipient load, flow | Particle size | Flow, dust and blend uniformity | Mixing time, capsule filling, sieving | Physical form | Powder or granule | Dust control, wetting, dissolution | Source strain | Which organism produced the enzyme | Identity file, regulatory dossier | Unit definition | What the number means | Certificate, specification, comparability What changes when the grade changes | Change | Effect on the formula | What to re-check | Higher activity per gram | Less powder for the same units | Capsule size, blend ratio, content uniformity | Lower activity per gram | More powder for the same units | Fill weight, excipient space, label | Different carrier | New ingredient on the label | Allergen and carrier statements | Granulated instead of powder | Better flow, different wetting | Blend time, dissolution, assay after granulation | Different assay method | The same number means something else | Comparability, specification, certificate A blend is not a grade. A powder that reaches 20,000 U/g by adding another protease has the activity but not the identity, and the certificate will show it only if the method and the protein pattern are examined. The identity page covers the tests that separate a standardised single enzyme from a blend. ## Appearance, solubility and the 40 mesh powder The catalog powder is white to off-white and free-flowing, and it dissolves in water to a clear to slightly turbid solution. The turbidity is normal for a protein preparation. A solution that is heavily cloudy or leaves a sediment may point to a carrier that does not dissolve or to a poorly milled lot. The particle-size line, ≥95% through 40 mesh, is a finishing specification. It matters for blend uniformity and for capsule filling, and it can move when the mill or the sieve changes without any change in the enzyme. A granulated form is available on request; granulation improves flow and reduces dust, but the wet mass and the drying step add a heat and moisture load that the activity has to survive. Ask for the activity result after granulation, not only on the ungranulated powder. Colour tells the buyer very little about activity. A whiter powder can be a dilution and a slightly darker one can be a concentrate. The number on the certificate, with its method, is the only reliable statement about strength. ## Units, fill weight and the label The arithmetic is simple and worth doing before a grade is chosen. At 20,000 U/g, one gram carries 20,000 U and one milligram carries 20 U. A 250 mg capsule of this grade carries 5,000 U. If the formula needs 20,000 U in a single capsule, that capsule needs one gram of this grade, or a smaller weight of a higher-activity grade. That is why a dilution can break a dosage form. Halving the activity per gram doubles the powder mass for the same units, and the extra mass has to fit the capsule, the stick pack or the tablet. The carrier also enters the ingredient list, and the label has to declare it. A switch in grade is therefore a change to the fill weight, the excipient load and the label at the same time. An enzyme activity is not a nutrient with a Daily Value. If the label states the activity, it should state the unit and the basis, and the destination's labelling rules decide whether the figure belongs in the supplement panel or beside it. ## Specification lines for this grade - “Serratiopeptidase, CAS 37312-62-2, EC 3.4.24.40, from Serratia marcescens.” - “Activity ≥20,000 U/g by the casein Folin assay, with the pH, temperature, incubation time and unit definition stated.” - “Identification by IR spectrum, conforming to the reference, and by the activity assay.” - “Loss on drying ≤5.0%; heavy metals and microbiology as listed.” - “Particle size ≥95% through 40 mesh; carrier and granulation declared.” - “No other protease activity declared; any blend is named as a blend.” We supply the 20,000 U/g powder and a granulated form on request. A different activity per gram is a different specification and should be quoted as such, with its own certificate and its own stability data. The catalog figures are on the product hub, and the release tests are on the COA page. ## When not to switch grade A grade switch is the wrong move when the label has already been approved around a named activity and unit definition. The new powder may meet the same number on paper and still fail the label review, because the method behind the number has changed. It is also the wrong move when the only reason for the switch is a lower powder mass. A higher-activity grade can reduce the fill weight, but it also changes the blend ratio and the content uniformity, and the process has to be revalidated. The comparison with nattokinase shows why a unit from another protease cannot be substituted for this one, and the quality page describes how a specification change is controlled. ### 02.1 Serratiopeptidase vs nattokinase: two proteases, two units URL: https://nutrition.rainwoodbio.com/products/enzymes/serratiopeptidase/grades/serratiopeptidase-vs-nattokinase/ Reviewed: 2026-11-19 Serratiopeptidase and nattokinase are both protease powders sold by activity, and that is where the similarity ends. One is a zinc metalloprotease from Serratia marcescens, measured in casein units; the other is a serine protease from Bacillus subtilis natto, measured in fibrin units. The numbers, the assays, the molecular masses and the regulatory files are different, so neither powder substitutes for the other on a label or in a blend. In one lineSerratiopeptidase is a zinc metalloprotease measured in casein units and nattokinase a serine protease measured in fibrin units, so the two numbers are not two spellings of one potency. ## Two enzyme classes, two mechanisms Serratiopeptidase, also called serrapeptase, is EC 3.4.24.40 and belongs to the M10B metallopeptidase family. Its catalytic site depends on zinc, and calcium contributes to the stability of the folded protein. Its molecular mass is reported broadly between 45 and 51 kDa. Nattokinase is a serine protease of the subtilisin type, produced by Bacillus subtilis natto. It does not depend on a zinc centre in the same way, and its molecular mass is close to 28 kDa. Serratiopeptidase and nattokinase side by side | Property | Serratiopeptidase | Nattokinase | Enzyme class | Zinc metalloprotease, family M10B | Serine protease, subtilisin type | Source organism | Serratia marcescens | Bacillus subtilis natto | Molecular mass | About 45–51 kDa | About 28 kDa | Metal dependence | Zinc in the active site; calcium for stability | No zinc centre; serine catalytic triad | Assay substrate | Casein | Fibrin | Usual activity unit | U/g on casein | FU/g on fibrin ## U/g on casein and FU/g on fibrin A serratiopeptidase unit is defined by the casein Folin assay: the enzyme acts on casein, the soluble peptides are coloured, and the colour is read against a tyrosine standard. One unit is the amount of enzyme that releases 1 µg of tyrosine per minute under the conditions the method names. The pH and temperature are part of the definition, which is why two method sheets can produce different figures for the same powder. A nattokinase FU is defined on fibrin. The common trade definition is an absorbance change at 275 nm of 0.01 per minute, and some method sheets define one FU as 1 µg of tyrosine released per minute or as a defined lysis area on a fibrin plate. The substrate and the detection principle are different from the casein assay, so the two units are separate scales. What each unit counts | Unit | Substrate | Detection | What it describes | U/g (serratiopeptidase) | Casein | Folin-Ciocalteu colour, tyrosine standard | Casein-hydrolysing rate | FU/g (nattokinase) | Fibrin | Absorbance at 275 nm, tyrosine colour or lysis area | Fibrin-directed rate | IU (nattokinase) | Synthetic chromogenic peptide | Absorbance at 405 nm | Peptide-cleavage rate A figure written as “20,000 units per gram” without the substrate is not a specification. ## Why the figures do not convert A conversion factor would require the ratio between the two assays to be constant across every preparation, and it is not. Fermentation, recovery and standardisation change the protein mixture, and the two substrates respond differently to that mixture. What does convert is arithmetic inside one unit system. One kilogram at 20,000 U/g carries 20 million U, and two kilograms at 10,000 U/g carry the same total. That calculation is useful for ordering and blending, and it says nothing about how casein units relate to fibrin units. When a customer needs a figure in a unit the supplier does not report, the answer is an assay, not a multiplication. Ask for the lot to be tested in the required unit, with the method and the raw result stated. ## Telling them apart in the laboratory SDS-PAGE is the quickest separation. Serratiopeptidase gives a band in the 45–51 kDa region, and nattokinase a band near 28 kDa. A band at an unexpected mass, or two bands, needs a declaration before use. The activity assays add a second dimension. A lot that is active on casein but not on fibrin is not nattokinase, and a lot that is active on both substrates may be a blend. The specific activity, the inhibitor pattern and the IR spectrum complete the file. XRD is not the tool here: both powders are largely amorphous, and a crystalline pattern would point to a carrier or a salt rather than to the enzyme. The serratiopeptidase identity page sets out the layers in full. ## Formulation and handling differences The metalloprotease is sensitive to chelators. EDTA and other strong chelating agents can remove the zinc the enzyme depends on, and a mineral premix can present metal ions in a form that interferes with the preparation. Calcium contributes to stability, so a formulation that strips divalent ions is a compatibility question for this enzyme in a way that it is not for a serine protease. Both enzymes are proteins and both lose activity with heat and moisture, so both need a sealed, dry pack and a process that does not overheat them. Enteric-coated capsules and granules are common for both, and the coating step adds solvent, heat and mechanical stress; the activity after coating is the number that belongs in the specification. A wet granulation can dilute the activity per gram while leaving the protein pattern intact, and the casein assay will show it. A blend with bromelain or papain, both cysteine proteases, will raise the casein activity and change the protein pattern; the bromelain page describes that material on its own terms. The methods page covers the assay side of the comparison. ## The label and the regulatory file The two names are not interchangeable on a label. Serratiopeptidase is declared as serratiopeptidase, with its activity and unit; nattokinase is declared as nattokinase or as the preparation that the market file names. The regulatory files are also separate. As of this review, a nattokinase-containing fermented soybean extract has an EU novel-food entry that names the preparation and an activity range in FU/g; that entry does not cover serratiopeptidase. Serratiopeptidase has its own route question, and the destination decides whether a food-supplement file is available. The serratiopeptidase compliance page and the nattokinase product page set out the two files. A switch from one to the other is a new specification, a new label and a new market check. It is not a substitution that can be managed by adjusting the number on the artwork. ## What to specify when either could fit Start with the market file, not with the activity figure. If the destination covers one preparation and not the other, the choice is made. If both are available, choose the unit the buyer's laboratory can run and the supplier's certificate can support, then check the dose mass and the dosage form against the activity per gram. When two quotations are compared, put the enzyme name, the source, the activity, the substrate and the method side by side. Ask each supplier for the assay method, the protein result and the protein pattern, and handle a blend as a separate product with its own specification. The serratiopeptidase hub carries the catalog figures, the nattokinase hub carries the other specification, and the quality page describes how each lot is released against its own method. ### 03 Serratiopeptidase activity is the shelf-life measure, not the appearance URL: https://nutrition.rainwoodbio.com/products/enzymes/serratiopeptidase/stability/ Reviewed: 2026-11-19 Serratiopeptidase loses activity with heat, moisture and time, and the loss is usually invisible. The catalog powder is released at ≥20,000 U/g with loss on drying ≤5.0%; the shelf life is assigned from stability data for the exact pack and storage condition, measured by the same casein assay that released the lot. A colour change is not the signal to watch; the activity result is. In one lineActivity disappears before appearance changes, so the shelf life has to rest on a validated activity assay rather than on the look of the powder. ## The powder: moisture, heat and the sealed pack The loss-on-drying limit of ≤5.0% is a release gate, not a storage allowance. Once a foil pouch is opened, the powder can pick up moisture from the air, and the activity falls as the water content rises. The process is not visible: the powder still flows, the colour is unchanged, and the certificate still describes the lot as it was packed. Heat accelerates the loss. A sealed pack held in a normal warehouse is usually acceptable; a hot loading bay, a vehicle roof or a warehouse corner next to a heater is not. Cold storage can help a long hold, but a cold pack should be allowed to reach room temperature before it is opened, so that condensation does not form on the powder. The pack is part of the stability specification. The 1 kg foil pouch and the 25 kg fiber drum with its inner liner are moisture barriers, and the seal is the weak point. A pouch that has been folded over is not resealed in the same sense as a heat-sealed pack; the headspace now holds humid air, and the activity starts to decline from that moment. ## In solution, the enzyme digests itself The powder dissolves in water to a clear to slightly turbid solution. In that solution the enzyme is a substrate for itself: a protease can hydrolyse its own peptide bonds, and the activity falls even at a favourable pH. Temperature, pH, metal ions and time all act at once, and a solution that is clear at the start can lose a large part of its activity during an overnight hold. A liquid or a ready-to-drink process adds a heat load through pasteurisation, hot fill or sterilisation. A bulk-powder stability result does not describe that process. If a liquid is unavoidable, protect it from light, hold it at the pH the stability data covers, keep dissolved oxygen low, and validate the hold time before filling. Freeze-thaw cycles are not a storage solution: they can concentrate solutes and denature the protein. The same logic applies to a wet granulation. The water, the heat of drying and the mechanical work all act on the enzyme, and the activity after granulation is the number that matters for the formula, not the activity of the ungranulated powder. ## What drives the loss Factors that move serratiopeptidase activity during storage and processing | Factor | What it does | Control | Heat | Accelerates unfolding and activity loss | Controlled store; cool process; short heat exposure | Moisture | Raises molecular mobility; activity falls | Sealed foil; liner; desiccant where justified | pH | Moves the enzyme away from its working range | Validate the matrix pH; avoid strongly acidic mixes | Chelators | Strip the zinc the enzyme depends on | Check EDTA and chelating excipients | Oxidation | Damages the protein and the required metal centre | Low oxygen; sealed pack; antioxidant review | Shear and compression | Heat and local stress during tableting | Process controls; assay after compression | Light | Slow contribution compared with heat and moisture | Opaque pack; dark store The chelator row is specific to this enzyme. Serratiopeptidase is a zinc metalloprotease, and calcium contributes to its structural stability. A formulation that removes free metal ions, or a premix that presents them in a form the enzyme cannot use, can reduce activity without any change in the certificate. The interaction is a formulation question, and it should be tested in the matrix rather than assumed from the powder data. ## A stability protocol for the ingredient A useful protocol names the pack, the storage condition, the time points and the tests. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% relative humidity cover the warehouse; accelerated storage at 40 °C/75% relative humidity stresses the pack. A light-exposure arm covers the failure mode that a dark incubator misses. Activity is the primary stability-indicating measurement, and it must be run by the same method as release. A trend built from two different assays is not a trend. Test loss on drying, appearance and microbiology at each point as well, because a lot can fail microbiologically while the activity holds. For a tablet, a capsule, a coated pellet or a stick pack, repeat the work in the finished form and at the process steps that expose the enzyme to heat or water. The report should show the individual results and identify the pack, the lot family and the method. A summary that says “stable” without the figures is not evidence. ## The dosage form decides the exposure A capsule has low water activity, but the shell and the excipients can still transfer moisture, and a hygroscopic filler can raise the water content of the fill. Check activity and loss on drying at release and after storage, not only the appearance of the capsule. A tablet adds compression heat and, if it is wet-granulated, a water and drying step; the activity after tableting is the number that belongs in the specification. Many serratiopeptidase products are presented in an enteric-coated capsule or as enteric-coated granules. The coating is there because the enzyme is a protein and is labile in the stomach; the coating process itself adds solvent, heat and mechanical stress. Measure the activity after coating, and check that the coating does not interfere with the assay's extraction step. Acidic ingredients, chelating ingredients and mineral premixes are the usual compatibility questions in a blend. A stick pack adds the seal and the foil as failure points. An overage is a formulator's decision about the label and the stability margin; it does not repair a pack that lets moisture in. ## How the shelf life is set We do not publish a single shelf-life number for serratiopeptidase, because the pack and the storage condition set it. The assigned retest period belongs on the specification and is supported by the stability file for that pack. A number without a pack, a condition and an activity method is not a shelf life; it is an assertion. After the retest period, re-assay the retained sample before extending use. Do not extend by assumption, and do not carry a bulk figure across to a repacked container. The product hub lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the methods page describes the assay; the quality page describes the release workflow. ### 04 Serratiopeptidase: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/enzymes/serratiopeptidase/moq/ Reviewed: 2026-11-19 The MOQ for serratiopeptidase is 1 kg, supplied as a 1 kg foil pouch. The bulk pack is a 25 kg fiber drum, and the standard lead time is 1–7 days from order confirmation. A firm quotation needs the exact preparation, the activity with its unit definition, the quantity and pack, the destination and Incoterm, the documents and the intended market. In one lineA kilogram is the smallest unit we can pack, sample and release as one traceable lot, which is why it is the minimum order. ## Why one kilogram is the floor A one-kilogram pack leaves enough material for a bench trial, a retained sample and an independent activity test after the pack has been opened for sampling. The casein assay, the identity checks and the microbiology panel all consume material, and a smaller pack leaves too little for a second test if the first result is disputed. Below 1 kg the material is usually split from a larger lot and repacked. That adds handling, breaks the link between the original pack and the sample, and makes traceability harder, without changing the enzyme. The 25 kg drum is the bulk unit: it reduces handling per kilogram, but it commits inventory to a longer storage period and a larger opening. The minimum is a pack decision, not a volume incentive. Because the product is sold by activity, the pack also fixes what a lot means. A lot of 1 kg can be sampled as a unit; a drum is sampled with a probe and the sample has to represent the blend. Either way the lot code on the pack, the certificate and the retained sample should match. ## Pack options Standard serratiopeptidase packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, qualification sample, small batch | Moisture barrier; reseal or transfer after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Granulation adds a heat and moisture step | Split pack | Agreed | Bench work | A repack with its own traceability, not a catalog pack The catalog form is a 40 mesh powder, ≥95% through 40 mesh. Granulation is a different physical specification, not a packing choice: it changes flow, dust, wetting and often the activity after processing. If the dosage form needs a granule, say so before the quotation, because the activity result and the lead time both move. Enzyme powder is hygroscopic, so the pack is a barrier rather than a container. Keep the foil sealed until use, close the drum liner, and record the date of opening. A desiccant can help in a humid store, but it is not a substitute for a seal. ## From confirmation to dispatch The standard pack is quoted at 1–7 days from order confirmation. That window covers picking, document preparation and dispatch; it does not include the shipping transit, customs clearance or the customer's own quality release. A custom granulation, a non-standard activity or a special pack adds time, and the quotation should state it as a separate line. Ask for the dispatch date, not only the lead time. A 25 kg drum may travel on a pallet and a 1 kg pouch as a parcel; the Incoterm decides who books the freight and who clears the entry. The certificate, the packing list and the safety data sheet should travel with the lot, not follow it. ## What makes a quotation firm Six items make an offer firm enough to compare: - Product and identity. Serratiopeptidase, CAS 37312-62-2, EC 3.4.24.40, source organism and strain. - Activity and method. Units per gram with the substrate, pH, temperature, incubation time and unit definition. - Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated variant. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, specification, safety data sheet and any market-specific statement the importer needs. - Intended use and market. Supplement, food or another use, and the country where it will be sold. A quotation without the unit definition and the destination is incomplete. The same powder can suit one market and fall outside the route for another, and the regulatory question is part of the offer. Commercial terms are stated on the quotation; they are not published on this page. ## A sample must carry a lot code The 1 kg pack is the qualification sample. Test activity by the method named in the specification, check identity by IR and protein pattern, measure loss on drying and run the microbiology panel before scaling. Keep a retained sample from the same pack, and compare the lot code on the sample, the certificate and the quotation. A sample that cannot be traced to a lot is a demonstration, not a qualification. If a bench trial needs less than a kilogram, discuss it before ordering. A split from a bulk lot is a repack with its own traceability, and it should be documented as such rather than treated as the catalog pack. ## Quality terms beside the commercial ones The quotation sets the commercial terms, the pack, the lead time and the documents. The quality terms belong beside them: the specification revision, a certificate per lot, the retained sample, the retest period, the storage statement and the change-control route. A quality agreement is worth having before the first production order rather than after the first dispute. Returns and replacements follow the quotation and the quality agreement. A lot that fails the agreed activity should be handled through the retained sample and a joint re-test, not through a photograph of the powder. Ask who pays for the referee test and which laboratory is acceptable to both sides. The product hub carries the catalog specification; the COA page lists the release tests; the stability page covers the storage case; the compliance page covers the market route; the MOQ glossary entry defines the term; the quality page describes the release file. ### 05 The regulatory file for serratiopeptidase URL: https://nutrition.rainwoodbio.com/products/enzymes/serratiopeptidase/compliance/ Reviewed: 2026-11-19 Serratiopeptidase is a protein with a history of medicinal use in some markets, which makes the food-supplement route a market-by-market question rather than a property of the name. The catalog specification and the batch certificate describe the preparation; the buyer's regulatory team confirms the route, the permitted use and the label for the destination. This page sets out the framework, the limits and the documents that belong in that file. In one lineThe specification describes a preparation; the regulatory file has to show that the same preparation is allowed in the destination, and serratiopeptidase does not have one uniform route. ## Four questions before the route A complete file answers four things. Is the preparation allowed in the destination, and under which regime? Does the specification match the preparation that was assessed? Do the contaminants sit under the ceiling for the finished dose? And what may the label and the claim say? The certificate answers none of these on its own. The first question is the hard one for this enzyme. In some markets serratiopeptidase has been authorised as a medicinal product, so a food or supplement route is a separate legal question and is not created by the name of the substance. A supplier statement that the material is “food grade” describes a specification, not a permission. The second question is preparation-specific. Activity per gram, source strain, carrier, residual fermentation medium and intended use all describe the article that was assessed. A permission or an opinion about one preparation does not automatically cover a higher-activity powder, a granulated form or a blend. Great Britain and Northern Ireland are checked separately. Great Britain applies a retained framework, with its own novel-food register and food-supplement rules; Northern Ireland follows the EU framework. The destination within the United Kingdom decides which file applies. ## European Union Four instruments frame the EU file. Regulation (EC) No 178/2002 sets the general food-law duties. Directive 2002/46/EC governs food supplements. Regulation (EU) 2015/2283 governs novel foods. Regulation (EC) No 1332/2008 applies where the enzyme is used for a technological function rather than as a nutritional ingredient, because a food enzyme needs to be covered by the Union list. Serratiopeptidase has been examined under the novel-food framework, and national authorities have taken differing views on food-supplement sales. As of this review, the Union register and the destination member state's position are the references to check, and the buyer should not rely on a general statement that the ingredient is “EU approved”. The route may also depend on the preparation and on the food category. Labelling follows Regulation (EU) No 1169/2011 and the supplement rules: the ingredient name, the carrier, the allergen statement where the source or the fermentation medium requires one, and the activity if it is declared. The EU regulatory note collects the framework references. ## United States The United States has no premarket approval list for a dietary ingredient. The route is DSHEA: a history of use before 15 October 1994, a new dietary ingredient notification at least 75 days before marketing, or a GRAS conclusion for the preparation and the use. A GRAS conclusion is company- and use-specific and does not travel with the name. The seller should be able to name the basis it relies on; the buyer confirms that the basis covers the finished product. The finished supplement is made under 21 CFR 111 and labelled under 21 CFR 101. An enzyme activity has no Daily Value, so it is a quality characteristic rather than a nutrient amount; the label names the ingredient and the unit, and the certificate proves the figure. A structure/function statement needs substantiation and the DSHEA disclaimer, and a disease-related claim is not permitted. No federal maximum applies to lead, cadmium or mercury in supplements. California Proposition 65 sets warning thresholds, and USP <2232> is a reference some buyers require. The catalog limits are release gates, not a federal ceiling. The US regulatory note gives the framework references. ## Contaminants against the ceiling The contaminant panel is a finished-product calculation as well as a drum result. The daily dose, the serving size and the destination text decide the ceiling that applies to the powder. Heavy metals · catalog limits and regulatory references | Metal | Catalog limit | EU supplement reference | US federal | Lead (Pb) | ≤3 mg/kg | 3.0 mg/kg | No maximum | Arsenic (As) | ≤2 mg/kg | No harmonised limit | No maximum | Cadmium (Cd) | ≤1 mg/kg | 1.0 mg/kg | No maximum | Mercury (Hg) | ≤0.1 mg/kg | 0.10 mg/kg | No maximum The EU ceilings come from Regulation (EU) 2023/915; Great Britain retains Regulation (EC) No 1881/2006. Compare on the same basis: a result per kilogram of powder and a limit per daily dose are different calculations. Microbiology follows the catalog lines: APC ≤1,000 cfu/g, yeast and mould ≤100 cfu/g, and E. coli and Salmonella absent. The COA page shows where each result belongs on the certificate. ## What the label may say An enzyme activity is not a disease-related claim and must not be presented as one. The number of units describes the preparation; it does not describe an effect on the body. Wording that implies an effect on a disease or a clinical outcome is outside the file, whatever the certificate says. In the EU, only authorised health claims may be used, and the register is checked for the exact wording. In the United States, a structure/function statement needs evidence and the DSHEA disclaimer. The label should use the ingredient name, the source and the activity with its unit, and it should match the specification that the market file covers. ## The file a brand should hold - Specification naming the source, the strain, the activity, the method and unit definition, the carrier and the limits. - Batch COA with the activity result, the method, the loss on drying, the metals and the microbiology. - Technical data sheet and safety data sheet, both carrying the activity and the source. - Route memo for the destination: the regime, the preparation assessed and the permitted use. - Allergen, GMO, origin, carrier and residual-solvent statements. - Contaminant results with methods, converted to the finished dose. - Stability summary for the pack, plus the storage statement and the retest period. - Approved label artwork and the claim substantiation file. - Change-control record for source, process, carrier or pack. ## Checklist before the first shipment - Is the preparation named by source, strain, activity and carrier, not only by “serratiopeptidase”? - Has the destination route been confirmed in writing, with the register or the notification cited? - Is the activity reported with the method, the conditions and the unit definition? - Do the metal results meet the destination's ceiling on the finished-dose basis? - Are the allergen, carrier and GMO statements in the file? - Does the label match the preparation and the rules of the destination? - Is every claim authorised, or absent? - Do the lot codes match on the COA, the pack and the packing list? The product hub carries the catalog specification; the identity page covers the analytical evidence; the stability page covers the storage case; the quality page describes the release file. The UK regulatory note covers the retained framework. ### 06 How to prove a powder is serratiopeptidase URL: https://nutrition.rainwoodbio.com/products/enzymes/serratiopeptidase/identity/ Reviewed: 2026-11-19 A serratiopeptidase lot is identified when several independent lines agree: the document names the preparation, the casein assay shows activity, the protein pattern shows a band at the expected molecular mass, and the specific activity is consistent with the declared units. The activity assay alone shows that the powder hydrolyses casein; it does not show which protease is doing it. In one lineThe activity assay shows that something in the powder cuts casein; identity needs the name, the protein band and a specific activity that agree. ## The identity layers A certificate can carry the right name and still fail to prove the material. The layers below ask separate questions, and each needs its own evidence. A supplier who answers only the first has described the paperwork, not the powder. Layers of serratiopeptidase identity | Layer | Question | Test | What it proves | Document | Is the article named? | Name, CAS 37312-62-2, EC 3.4.24.40, source strain | Paperwork only | Activity | Is it a casein protease? | Casein Folin assay, unit definition stated | Proteolytic activity, not identity | Protein | Which proteins are present? | SDS-PAGE against a molecular-mass marker | The band pattern, including extra proteins | Specific activity | Is the activity diluted or substituted? | Units per gram divided by protein per gram | Consistency between activity and protein | Structure | Does the solid match the reference? | IR spectrum; XRD for the solid state | Similarity to a reference, and the carrier The molecular mass reported for serratiopeptidase varies with the method and the preparation, broadly in the 45–51 kDa range. A single strong band near that region, with the activity and the specific activity beside it, is stronger evidence than a certificate that says “conforms”. ## The activity-to-protein ratio The ratio of units to protein is the quickest check on a dilution. If an inert carrier is added, both the activity per gram and the protein per gram fall, and the ratio stays roughly the same. If the activity is unchanged while the protein content changes, the material is not simply diluted; either the enzyme amount or the enzyme itself has changed. The ratio therefore reads as consistency, not as a purity figure. An example makes the arithmetic clear. A powder at 20,000 U/g with 20% protein carries 100,000 U per gram of protein. A second powder at 20,000 U/g with 10% protein carries 200,000 U per gram of protein; the same units now sit on half the protein, which points to a different preparation, a different standardisation or a more active enzyme. Neither figure is a specification by itself, and the method used for protein matters: Kjeldahl measures nitrogen, while a dye-binding method measures protein differently. State the method when the ratio is quoted. The ratio is not a routine catalog line. Ask for it when a new source is qualified, when a dilution is suspected, or when two quotations differ without a visible change in the specification. The COA page shows where activity and protein belong on the certificate. ## X-ray diffraction: what it can and cannot show An enzyme powder is largely amorphous, so its X-ray diffraction pattern is a broad halo rather than a set of sharp crystalline peaks. Sharp peaks in the pattern come from something else: a crystalline carrier, a salt, or a mineral added to the blend. XRD is therefore a solid-state and carrier test, not an identity test for the enzyme. That does not make it useless. XRD can show whether a lot contains a crystalline filler that the specification did not declare, and it can compare the carrier between two lots. It cannot confirm that the protein is serratiopeptidase, and it does not measure the activity. A certificate that reports “XRD conforms” without the pattern, the reference and the phases identified has added very little. For a disputed lot, IR plus SDS-PAGE plus the activity result is the useful combination. The methods page describes the assay side of that file. XRD belongs in the file only when a solid-state or carrier question is actually open. ## Substitutions and their signals The activity figure is the easiest number to satisfy and the easiest to fake. A powder can reach 20,000 U/g by carrying a different protease, and the certificate will look normal unless the protein pattern and the specific activity are examined. Common serratiopeptidase substitutions and the signals | Adulterant | What it does | Signal | Test | Inert carrier | Lowers units per gram; adds mass | Activity low; protein low; ratio steady | Activity, protein, IR | Other protease blend | Restores activity with another enzyme | Extra protein bands; different specificity | SDS-PAGE, specific activity, substrate panel | Different enzyme | Substitutes a protease of another class | Wrong molecular mass; inhibition pattern differs | SDS-PAGE, inhibitor study | Denatured powder | Protein present, activity lost | Band present; activity low; ratio low | Activity, specific activity | Water or humectant | Raises mass; activity per gram falls | Loss on drying high; ratio diluted | Loss on drying, activity Bromelain, papain and alkaline protease are all proteases that hydrolyse casein, so the Folin assay will count them. A blend can pass an activity specification and still be a different product with a different unit definition, a different stability profile and a different regulatory description. That is why the specification should say “single enzyme preparation”, and why a blend should be declared as a blend. ## Identity clauses for the specification - “Serratiopeptidase, CAS 37312-62-2, EC 3.4.24.40, from Serratia marcescens, strain stated.” - “Activity ≥20,000 U/g by the casein Folin assay, with the pH, temperature, incubation time and unit definition stated.” - “Identification by IR spectrum conforming to the reference, and by the activity assay.” - “Protein pattern by SDS-PAGE consistent with the reference, with the molecular-mass markers reported.” - “Specific activity reported as units per milligram of protein, with the protein method named.” - “Loss on drying ≤5.0%; heavy metals and microbiology as listed; particle size ≥95% through 40 mesh.” - “Single enzyme preparation; carrier declared; no other protease activity added.” ## Five questions before qualification - Which strain produced this lot, and which unit definition and assay conditions are on the certificate? - Can you provide the raw activity data, the standard curve and the assay worksheet, not only the final U/g? - Can you provide the SDS-PAGE image with markers and the protein load, and the protein result with its method? - What is the carrier, and is any other protease activity present in the preparation? - If the lot is disputed, will you accept a joint re-test on the retained sample? Five direct answers amount to an identity file. A single activity figure does not. The product hub carries the catalog specification; the grades page explains what the activity per gram fixes; the comparison with nattokinase shows why another protease's unit cannot stand in for this one; the bromelain page is the reference point for one of the common blend partners; the quality page describes how the evidence is kept. ### 01 What the COA for superoxide dismutase actually contains URL: https://nutrition.rainwoodbio.com/products/enzymes/superoxide-dismutase/coa/ Reviewed: 2026-11-19 On a superoxide dismutase certificate the reader should find appearance, identification, activity, moisture, heavy metals, microbiology and particle size. Identification here is the activity assay plus an infrared spectrum, and the activity is given in units per gram. Every line carries the method that produced it and the limit it was released against; the measured figure belongs in a column of its own. The limits below are the catalog specification; the lot certificate confirms one pack. In one lineAn activity figure of 10,000 U/g is only a result once the certificate names the assay system, the 50% inhibition definition and the moisture of the lot beside it. ## The certificate as a test report A certificate earns its place when every line can be audited: what was measured, by which method, against which limit. A row that offers only “conforms” gives a conclusion and withholds the measurement. The identity row is unusual here. No retention time, titration or melting point separates one SOD from another, so identification rests on the catalytic activity in a defined system plus an infrared spectrum that shows a protein. The activity row is also the quantity row, and neither one alone proves the powder is the enzyme it names. Identity, activity and contaminants · superoxide dismutase | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | Activity assay and infrared spectrum | Conforms to the reference | Activity | Xanthine oxidase and NBT, 50% inhibition | ≥10,000 U/g | Loss on drying | Gravimetric | ≤8.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh ## As-is, dry basis and units per milligram of protein The activity figure needs a basis in two senses: the mass it is divided by, and the unit definition, which for an enzyme is part of the number rather than a footnote to it. On the mass side, a certificate reports units per gram of powder as received. A lot reading 10,000 U/g as-is with 6.0% loss on drying calculates to 10,638 U/g on a dry basis. The gap matters: 10,000 U/g as-is and 10,000 U/g dry describe two different powders, and it widens toward the 8.0% limit. Four ways to express the same lot | Basis | How it is calculated | What it changes | U/g as-is | Measured activity divided by mass as received | The working number for the weigh-up | U/g dry basis | As-is figure divided by dry matter | Removes the dilution by water | U/mg protein | Activity divided by protein (Kjeldahl or colorimetric) | The specific activity, and the quality of the concentrate | U per capsule | U/g multiplied by fill mass | The arithmetic behind the label A SOD unit is the amount of enzyme that inhibits a colour reaction by 50% under stated conditions, so the substrate system, the detector, the pH, the temperature, the wavelength and the path length all sit inside the definition. A certificate that prints “≥10,000 U/g” without them has not fixed the unit, and the figure cannot be compared with another laboratory's certificate. The unit page takes the definition apart. ## Release limit versus batch result The limit marks where a lot is accepted or rejected; the result is the number the laboratory obtained on that lot. Both have a place on the sheet, in two different columns. A result column that repeats the specification range has copied the gate instead of reporting a measurement. What belongs in the result column | Parameter | Release limit | Result column | Activity | ≥10,000 U/g | The figure for the lot, with the assay system and the inhibition definition | Loss on drying | ≤8.0% | The percentage found for the lot | Heavy metals | Per element | One figure in mg/kg for each element | Microbiology | Counts and absence | The plate count plus the absence statement | Particle size | ≥95% through 40 mesh | The percentage that passed the sieve A reader should be able to reach “passes specification” from the figures alone. Microbiology is evidenced by a plate count and an absence statement; heavy metals by one figure per element rather than a single sum. ## What moves between batches At 10,000 U/g a large share of the powder is not enzyme. The lot is a blend of an activity concentrate and a carrier, so the blend is part of the product. Three things move the result: the activity of the concentrate, the blend ratio and the evenness of the mix. Samples from the top and the bottom of a drum should match, and a single result does not show that. Moisture moves with drying and with the carrier, and the 8.0% loss-on-drying limit is wider than for a crystalline ingredient because a spray-dried or lyophilised protein holds water more loosely. Milling and sieving shift the sieve result and leave the chemistry alone. A trend over several lots tells you more than a single result close to an edge: activity drifting toward the limit, loss on drying climbing, a colour that darkens, a protein band that moves on a gel. The lot code has to be the same on the certificate, the pouch, the drum and the retained sample. ## When to order an outside test An outside test is worth ordering when the source is new, when a market is being entered for the first time, when a claimed activity outruns the supplier's own certificate, or when a result is contested. The panel repeats less than the certificate: activity with the same unit definition, protein by Kjeldahl or a validated colorimetric method, SDS-PAGE, ICP-MS and microbiology. The referee must use the same unit definition as the specification: a second laboratory on a different substrate system will return a different number. Ask for the linear range, the inhibition level of the sample and a detection limit for each screen. A “not detected” without a detection limit tells you about the laboratory, not the material. Custody has to be traceable: the portion tested is the portion retained, and the report names the lot it came from. If a result is disputed, send the referee the retained sample, the certificate and the specification, and ask for a test that tells an enzyme from a blend instead of another run of the same assay. ## What to compare between suppliers Compare seven things: source and CAS number; activity and unit definition; protein content and specific activity; carrier and blend ratio; loss on drying; heavy metals and microbiology; pack size and lot code. Two quotes that match on activity but not on assay system do not describe the same powder. The second layer is the process record: who made the concentrate, from which source, with which carrier it was blended, and which drying and milling steps applied. The catalog limits are published on the superoxide dismutase product page. The tests that separate a real enzyme from a blend are on the identity page; the market file is on the compliance page; the elemental method is described in the ICP-MS note; the release workflow is on the quality page. ### 02 Superoxide dismutase grades: activity, source and carrier URL: https://nutrition.rainwoodbio.com/products/enzymes/superoxide-dismutase/grades/ Reviewed: 2026-11-19 Superoxide dismutase is sold as a formulated powder, and a grade is fixed by three things: the activity per gram, the source of the enzyme and the carrier it is blended with. The catalog grade here is ≥10,000 U/g, which means that one gram carries 10,000 units and that most of the gram is not enzyme. Changing the source or the activity changes the specification, the documentation and the label arithmetic, so the grade is a purchase decision rather than a packaging detail. In one lineA SOD grade is defined by the activity per gram, the source and the carrier together, because at 10,000 U/g the carrier is most of what the customer weighs out. ## Why a SOD powder is a blend The purified enzyme is a protein that is expensive to make and hard to handle at full strength: it is sticky, it is hygroscopic, and a gram of it would carry several million units, far more than a capsule or a stick pack needs. The commercial answer is a concentrate blended down to a stated activity with a food-grade carrier, so that a formulator can weigh a practical mass and get a predictable number of units. That is why the activity per gram is the first line of the grade and why the carrier is the second. The concentrate determines how much activity the blend can carry; the carrier determines the powder's flow, its solubility, its moisture and its label declaration. A grade quoted at 20,000 U/g is not simply twice as good as one at 10,000 U/g; it is a different blend with a different carrier load, and it may need a smaller capsule or a smaller scoop to deliver the same units. The source is the third axis. An enzyme from a plant extract, a microbial fermentation and an animal tissue is the same catalytic idea and a different material: different protein background, metal content, impurities and documentation. A change of source is a change of specification, not a supplier convenience. ## The four choices a grade fixes What each choice in a SOD grade changes | Choice | What it changes | What to ask | Activity per gram | Powder mass per serving; capsule size; carrier load | The measured U/g and the assay system behind it | Source | Protein background, metal content, documentation | Source name, and the TSE/BSE or allergen statement it needs | Carrier | Solubility, flow, moisture, label declaration | Carrier identity, blend ratio, allergen and GMO status | Single enzyme or blend | What the activity number describes | Whether any other enzyme is present, and at what activity The fourth line is the one buyers miss. A powder that contains SOD and catalase can be sold as a blend, but the SOD specification then describes only one component of it. The catalog grade on this page is the single enzyme; a blend is a separate purchase with its own specification and its own label. ## Appearance, solubility and handling The catalog describes a white to off-white, free-flowing powder that dissolves in water to a clear to slightly opalescent solution. The colour is a weak signal: a blend with more carrier is paler, and a concentrate that has been spray-dried rather than lyophilised can differ again. Solubility matters more than colour, because the carrier is often the more soluble part of the blend; a solution that stays cloudy can point to an insoluble carrier or to protein that has been heat-damaged. Loss on drying is limited to ≤8.0% and particle size to ≥95% through 40 mesh. Both are finishing specifications: the moisture reflects the dryer and the carrier, and the mesh reflects the mill and the sieve. Neither says anything about activity, and a lot can meet both while sitting at the bottom of its activity range. The powder is hygroscopic once the pack is open. A foil pouch opened for a trial and closed with a clip picks up water in a humid room, and the activity per gram falls as that water dilutes the powder. Weigh out what the trial needs, reseal with the desiccant and keep the working stock dry. ## Mass arithmetic and the label At 10,000 U/g, the arithmetic is direct: 100 mg carries 1,000 units, 250 mg carries 2,500 and 500 mg carries 5,000. The same arithmetic runs backwards from the serving: a formula that needs 3,000 units per capsule takes 300 mg of this grade, which sets the capsule size and the number of capsules per serving. The carrier load is the part that reaches the label. At 10,000 U/g the powder is very largely carrier, so the carrier has to be declared as an ingredient in the EU list and as an other ingredient in the US Supplement Facts panel, and a change of carrier is a label change. A grade at 20,000 U/g halves the mass per serving and halves the carrier load; that is the reason a higher grade is chosen, not the number itself. Declare the unit as well as the mass, and declare the basis of the activity. “SOD 250 mg (10,000 U/g)” and “SOD 2,500 U” describe the same capsule from two directions, and a label that mixes them without the denominator invites a mismatch at the weigh-up. The unit page sets out what the unit means. ## What to write into the specification - “Superoxide dismutase, CAS 9054-89-1, activity ≥10,000 U/g by the xanthine-oxidase/NBT system, with the unit definition stated.” - “Source named on the specification and the certificate; the matching documentation attached.” - “Carrier named, with its allergen and GMO status; blend ratio declared on the technical data sheet.” - “Loss on drying ≤8.0%; particle size ≥95% through 40 mesh; appearance white to off-white.” - “Heavy metals and microbiology as listed; no other enzyme declared unless specified.” - “Destination market and the source confirmed before the order.” ## When a different grade is the wrong buy A higher-activity grade is the wrong buy when the formula is built around 10,000 U/g and the capsule is large enough: it changes the carrier, the flow and the label for no gain. A lower-activity grade is the wrong buy when the serving needs more units than the capsule holds, because the answer to a fill problem is less of a stronger powder, not a bigger capsule. A blend is the wrong buy when the customer's specification names one enzyme. If a quotation offers SOD with catalase at a combined activity, ask for the SOD figure separately, because the two enzymes work in sequence and the combined number does not describe either one. A technical grade without the food documentation is the wrong buy for a supplement, however high its activity. The catalog grade sits on the product page. The certificate rows that carry the grade are on the COA page; the source and blend questions are taken further on the identity page; the pack sizes are on the ordering page; the second enzyme in a blend has its own page under catalase. ### 02.1 SOD units: what 10,000 U/g measures, and what it does not URL: https://nutrition.rainwoodbio.com/products/enzymes/superoxide-dismutase/grades/superoxide-dismutase-units/ Reviewed: 2026-11-19 A superoxide dismutase unit is not a mass. It is the amount of enzyme that inhibits a reporter reaction by 50% under stated conditions, so the unit carries the detection system, the pH, the temperature and the wavelength inside its definition. “≥10,000 U/g” says that a gram of this powder delivers 10,000 such units, and nothing about how much enzyme protein that gram contains. In one lineAn SOD unit is a 50% inhibition of a colour reaction under fixed conditions, not a mass, so U/g of powder and U/mg of protein answer two different questions. ## A unit is a rate, not a milligram Activity measures how fast a substrate is converted, so the unit states the substrate, the conditions and the readout. For SOD the substrate is the superoxide radical, which cannot be weighed or bought as a stable reagent. Every practical assay generates it in situ and measures it through a detector that changes colour. The SOD competes with that detector for the radical, and the unit is defined by how much the colour is suppressed. Three denominators are in circulation and they are not interchangeable. Units per gram of powder describe the formulated blend and are the number a customer buys. Units per milligram of protein describe the concentrate and are the number that says how pure the enzyme is. Units per capsule or per serving describe the finished product and are the number on the label. A quotation with units and no denominator has not said which it means. The prefix adds a second trap: 10 U/mg is 10,000 U/g, and a certificate that switches between them without saying so can look a thousand times stronger or weaker than it is. Read the denominator before comparing figures, and the unit definition before comparing laboratories. ## The systems a SOD unit can be built on The catalog assay for this grade is the xanthine-oxidase/NBT system: the enzyme generates the radical, nitroblue tetrazolium is the detector, and dye reduction is read at about 560 nm. Other systems are in routine use, each with its own unit definition. Common SOD assay systems and what their units rest on | System | Detector and readout | Unit definition | Xanthine oxidase / cytochrome c | Reduced cytochrome c at 550 nm | The classical 50% inhibition unit at pH 7.8 and 25 °C | Xanthine oxidase / NBT | Formazan from nitroblue tetrazolium at about 560 nm | 50% inhibition of dye reduction in the stated buffer | Pyrogallol autoxidation | Pyrogallol oxidation product, ultraviolet readout | 50% inhibition of the autoxidation rate at pH 8.2 | WST-1 tetrazolium | Water-soluble formazan at 450 nm | 50% inhibition in a plate format, often with a kit standard A figure from one system does not transfer to another by arithmetic. The detectors react with the radical at different rates, the buffers and pH differ, and the radical generated per minute differs with the xanthine oxidase lot. A laboratory can measure both systems on one sample; a supplier who divides one number by a factor has produced an estimate, not a measurement. ## Why the 50% definition is not linear The unit rests on a point of the inhibition curve, not on a rate that doubles with the enzyme. A sample inhibiting 30% of the dye reduction sits below the calibration point and one at 70% sits above it, so both are diluted and re-read until the inhibition is near 50%. The same powder read at 40% and at 60% can give two apparent activities, which is one reason two laboratories disagree on a sample that was never diluted into range. The position of 50% also depends on detector concentration, path length and temperature: a 200 µL plate well and a 1 cm cuvette do not see the same reaction, and a kit with a fixed standard defines its unit against that standard, not the classical one. “Inhibition rate %” is a raw reading, not a unit, and a certificate that reports only a percentage has not stated an activity at all. ## Converting U/g to U/mg protein The conversion needs the protein content. Activity per gram of powder divided by grams of protein per gram of powder gives units per milligram of protein, and that figure is the specific activity of what is in the blend. It is the number that separates a good concentrate from a poor one, and it is the number the powder activity hides. Worked through: a powder at 10,000 U/g carries 10 U/mg of powder. If the concentrate behind it is quoted in the low thousands of units per milligram of protein, the powder is roughly 0.2–0.3% protein by mass, and the rest is carrier. That is what a formulated grade is. It does mean that a buyer comparing two powders at the same U/g should ask for the protein figure and the specific activity, because one may be built from much less of a better concentrate. No factor converts a figure from one assay system to another. A factor in a quotation is an empirical number from one laboratory's paired measurements, and it should be presented as calculated, with both methods named. ## What the powder number does and does not describe The U/g figure describes the blend: it tells the formulator how many units a weighed mass delivers, which is what a capsule fill or stick pack needs. It does not describe the purity of the enzyme, the source, the metal content or the protein pattern, and two powders at 10,000 U/g can differ in all four. That is why activity belongs beside the identity evidence. A protein check, a metal ratio and a gel pattern say what the powder is made of; the activity says how much catalysis it delivers. The identity page sets out that second half, and the catalog figure for this grade is on the product page. ## What the label has to state The label needs the mass, the activity and the denominator, and the arithmetic has to hold together. “SOD 250 mg (10,000 U/g)” and “SOD 2,500 U per capsule” describe one capsule; a per-gram activity beside a per-capsule claim built from a different mass does not. Declare the assay system in the specification and the technical data sheet, even where the label carries only the unit. In the EU, the ingredient list and the quantitative declaration follow the general food information rules, and an activity statement has to be truthful and substantiated by the lot data. In the US, the Supplement Facts panel declares the amount per serving, and the unit should be the one the certificate states. The buyer's regulatory team confirms the wording for the destination, as of this review. Two enzyme units are not a common currency. Lysozyme is measured turbidimetrically on a bacterial substrate and catalase by the loss of hydrogen peroxide, and neither number can be added to a SOD figure or converted into one. Lysozyme units are compared on the lysozyme page; the partner enzyme is on the catalase page; method write-ups sit under methods; the release workflow is on the quality page. ### 03 Superoxide dismutase stability: what the pack and the process decide URL: https://nutrition.rainwoodbio.com/products/enzymes/superoxide-dismutase/stability/ Reviewed: 2026-11-19 Superoxide dismutase is most stable as a dry powder in a sealed pack and least stable once it is dissolved, heated or exposed to chelators and oxidants. The catalog limits of ≤8.0% loss on drying and ≥95% through 40 mesh describe the powder that goes into the pack; the shelf life is set by what happens to that powder in the pack and in the process that turns it into a capsule or a stick pack. The enzyme is a protein with a metal at its active site, so anything that removes the metal or oxidises the protein removes activity. In one lineSOD keeps in a dry, sealed, cool powder and loses activity with water, heat, chelators and peroxide, so the process step and the pack set the shelf life. ## The dry powder is the stable state A protein with low moisture is a glass: mobility is low, unfolding is slow and activity is retained for a long time at ambient temperature. The 8.0% loss-on-drying limit is wider than for a crystalline ingredient because a spray-dried or lyophilised protein holds water loosely, and the water that remains can plasticise the powder if the pack lets more in. The pack is part of the stability specification, not packaging. A 1 kg foil pouch or a lined 25 kg fiber drum keeps the powder dry while the seam, the foil and the liner are intact. A drum with a broken liner is a shipping container, not a moisture barrier, and a pouch opened and clipped shut is a different pack from the one that was tested. Refrigeration does not repair a wet pack: a cold pouch opened in a warm room condenses water on the powder. Moisture also feeds microorganisms. The micro specification of APC ≤1,000 cfu/g, yeast and mould ≤100 cfu/g and E. coli and Salmonella absent is a release gate, not a licence to store the powder damp. A lot that passes at release can fail after a humid week in an open drum. ## Once water is added, the clock runs faster In solution the protein is fully hydrated, and the reaction it catalyses also damages it: hydrogen peroxide, the product of the dismutation, oxidises the copper site and activity declines during storage. The loss is faster at higher temperature and at pH away from neutrality. A clear solution on a bench is the least stable form of the product. That is why a drink mix is a dry powder and why a liquid intermediate needs its own data. If a process uses a coating suspension, a granulation fluid or a slurry, the time and temperature of that step belong in the process record, and the activity after the step is what the capsule carries. ## What drives the loss SOD activity · factors and controls | Factor | Effect | Control | Heat | Protein unfolding and loss | Keep process temperature low and contact short | Water | Mobility, caking, microbial growth | Dry to ≤8.0% loss on drying, foil pack, desiccant | pH | Activity outside the neutral window | Check the matrix pH, not only the powder | Hydrogen peroxide | Oxidation of the active-site copper | Avoid peroxide-generating systems near the enzyme | Chelators | Strip the metal from the active site | Check EDTA and citrate in the formula | Shear and foam | Surface denaturation | Low-shear mixing, anti-foam control | Light | Slow contribution | Opaque pack or carton | Time | Background loss | Real-time data and an end-of-shelf-life limit The table is qualitative on purpose. The size of each effect depends on the matrix, the moisture and the temperature, and only a measurement on the formula shows its size. A supplier's powder stability describes the drum; it does not predict what a tablet with an acidic excipient does. ## A stability protocol that answers the question Run real-time storage at the label condition with an accelerated arm beside it. A common design is 25 °C and 60% relative humidity for real time, 40 °C and 75% for the accelerated arm and 30 °C and 65% for hot, humid destinations, with assay points at 0, 1, 3, 6, 12 and 24 months. The assay uses the same unit definition and system as the release certificate, plus loss on drying, appearance and micro at the start and the end. Test the material the customer buys: the capsule if the product is a capsule, the sealed stick if it is a stick pack. A powder study cannot stand in for the capsule, because the press adds heat and shear and the excipients bring their own pH and water. Keep a control at 4 °C to separate true instability from assay drift, and keep the raw data. Accelerated data screens a formula; it does not assign a shelf life for an enzyme. A lot that loses activity at 40 °C may be acceptable at 25 °C, and a lot that passes the accelerated arm can still fail in real time. The shelf life should rest on real-time data for the pack and matrix. ## Granulation, tableting and the pack Wet granulation adds the two factors that remove the most activity, water and heat, and the loss is invisible in the incoming certificate. Dry granulation avoids the water but adds pressure and heat; direct compression avoids the drying step but still exposes the powder to punch heat and shear. A capsule filled with powder and a tablet pressed from it are not the same stability question. Coating is a separate risk: an aqueous film coat wets the tablet and dries it with hot air. Effervescent systems are the least friendly matrix, because the tablet is designed to dissolve and the powder bed is humidity-sensitive. Stick packs are friendlier where the foil and the seal keep water out. A foil laminate, a desiccant and a nitrogen flush each change the shelf life, so a pack change is a stability change. A blend with catalase is its own case. The two enzymes have different stability profiles, so the blend's activity is limited by the less stable component, and a SOD specification does not describe the catalase in the same powder. Test the blend as a blend. ## Assigning the shelf life The label activity is an end-of-shelf-life figure. If the label declares 10,000 U/g and the real-time study shows 90% retention at the target shelf life, the release target has to sit near 11,111 U/g for the label to stay true at the end. That is arithmetic, not a batch result, and the retention figure has to come from the study on that matrix and pack. Where retention is not known, the shelf life should be short and justified, not long and assumed. The storage statement on the pack — cool, dry, sealed — is part of the claim, and a label that promises a shelf life the pack cannot deliver is a specification error. The catalog limits are on the product page; the COA page shows the activity and moisture rows the study follows; the grade page explains why the carrier load changes the matrix; the ordering page covers the packs; the method notes describe the assays, and the quality page covers the release file. ### 04 Superoxide dismutase: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/enzymes/superoxide-dismutase/moq/ Reviewed: 2026-11-19 The minimum order for superoxide dismutase is 1 kg, packed as a sealed foil pouch, with a 25 kg fiber drum for larger quantities and a lead time of 1–7 days for a released lot. One kilogram is not a round number chosen for convenience: at 10,000 U/g it carries ten million units, which is enough for trial batches at a realistic scale, and it is the smallest pack that can be filled, sampled, assayed and traced as one lot. In one lineOne kilogram is the smallest SOD order because it is the smallest pack that can be filled, assayed and traced as a single lot. ## Why the minimum is one kilogram An enzyme order is sized by activity as well as by mass. At 10,000 U/g, 1 kg delivers 10 million units, enough for a pilot batch, a stability study and a retained sample from the same lot. A smaller pack would have to be a repack of a larger lot, and a repack carries the original lot code rather than a new one; the buyer then has a pack that cannot be traced to its own certificate. The second reason is analytical. The activity assay is run on a sample drawn from the pack, and the sample has to be representative of the whole. A 1 kg pack can be sampled, sealed and shipped with the certificate for that lot; a handful of grams in a bag is a sample, not a purchase. When the trial is over, the retained sample is what a dispute is settled on. The floor also sets the trial arithmetic. A pilot batch of capsules at 250 mg of powder per capsule uses 250 g per 1,000 capsules, so 1 kg covers a pilot run with material left for a second trial and a retained sample. A larger pack is cheaper per kilogram in freight terms but turns the first order into stock, which is the wrong trade for an ingredient whose activity has to be re-checked on arrival. ## Packs and what they protect The 1 kg pack is a foil pouch: a laminate with a heat-sealed seam that acts as the moisture barrier, with the label carrying the product name, the lot code, the activity, the pack mass and the storage condition. The 25 kg pack is a fiber drum with a food-grade liner; the liner is the barrier, and the drum is the handling container. A drum with a torn liner at the rim has lost the barrier even though the drum looks intact. Both packs protect the same thing, which is moisture. The powder is hygroscopic, and the activity per gram falls as water is picked up, so the pack and the desiccant where one is used are part of the specification. A pouch that has been opened for a trial and closed with a clip is no longer the pack that was tested. For a blend or a custom activity, the pack is agreed with the order. A 10 kg pack, a drum with a nitrogen flush or a pack with a specific desiccant is a change to the packaging specification, and it should be written down rather than arranged on the telephone. ## Lead time and what moves it The 1–7 day lead time covers a released lot from stock: the lot is picked, the documents are checked against the order and the pack is labelled and dispatched. The seven-day end covers a lot that needs a fresh certificate copy, a document that has to be signed or a pack that has to be assembled from a drum. Four things extend the lead time. A custom activity or a custom blend needs a production slot. A source that is not in stock needs a purchase. A destination that requires a specific document set, such as a legalised certificate or a customer-specific declaration, adds time for the paperwork. A pack that is not the standard pouch or drum adds time for the packing run. The documents should travel with the shipment, not after it: the certificate for the lot, the technical data sheet, the safety data sheet and the statements the destination needs. A shipment that arrives before its certificate forces the receiving laboratory to hold the material, which is the same as a late delivery. ## What a quotation needs A quotation for an enzyme is only comparable when it names the material, the activity and the pack. The six details below are the minimum; a quotation missing any of them will need a second round. The six details a SOD quotation should carry | Detail | Why it changes the answer | Activity and unit definition | 10,000 U/g on one assay system is not 10,000 U/g on another | Source | Plant, microbial and animal sources are different materials | Carrier | Changes the mass per serving and the label declaration | Quantity and pack | The pouch and the drum are different handling units | Destination and documents | Sets the statement set and the language of the paperwork | Specification version | The quotation and the certificate must cite the same one Add the Incoterm, the place of delivery and the requested ship date. A quotation that gives a mass and a number of units but no assay system is not a quotation for a specification; it is a quotation for a powder. ## Samples and the trial A sample is drawn from a released lot and is accompanied by that lot's certificate, so the trial result can be compared with the release figures. The sample is not a separate production run and it is not a promise about the next lot; it is evidence about the lot it came from. Ask for the retained sample to be kept for the agreed period. If the trial fails, the first question is whether the sample and the shipment are the same material, and the lot code on the pouch, the certificate and the retained sample is the answer. A sample without a lot code cannot settle that question. ## Terms to settle before the first shipment Settle the Incoterm and the place of delivery, the payment terms, the document set and the language, the shelf life remaining at delivery and the claims window. The last two are the ones that matter most for an enzyme: a lot with a short remaining shelf life at delivery is a different purchase from one with a long one, and a claims window shorter than the receiving laboratory's turnaround leaves no room to test. Write change control into the terms. A change of source, carrier, activity or pack is a change of specification and should need written agreement, not a note on the packing list. The product page carries the catalog specification; the COA page explains the certificate that comes with the pack; the stability page covers the storage condition the pack has to hold; the compliance page lists the documents, and the quality page covers release. ### 05 The regulatory file for superoxide dismutase URL: https://nutrition.rainwoodbio.com/products/enzymes/superoxide-dismutase/compliance/ Reviewed: 2026-11-19 Superoxide dismutase is a protein with a source, an activity and a carrier, and the regulatory file has to describe all three before it describes a market. The catalog specification and the lot certificate answer the material question. The route question — whether this enzyme, from this source, at this activity, may be sold in the destination — is confirmed by the buyer's regulatory team, and this page lists the framework and the documents that file needs. In one lineA SOD file has to show which enzyme, from which source, at which activity and on which route, because the source and the process change the regulatory question. ## What the file contains A complete file answers four practical questions. What is the material, and which specification version is being bought? Which lot is being released, and what does its certificate report? Which limits and label rules apply to the finished product at the intended dose? And what changes if the source, the process or the pack changes? The certificate answers the lot question, the technical data sheet answers the specification question and the safety data sheet answers the handling question. None of them answers the route question on its own. For an enzyme the specification has to carry the activity and its unit definition as well as the identity. A file that names the material but not the assay system cannot be compared with the buyer's reference specification, and a file that names the activity but not the source cannot be reviewed for the market. ## European Union Several instruments apply at once. General food law, Regulation (EC) No 178/2002, sets the safety duty; the food supplements Directive 2002/46/EC sets the category; Regulation (EU) No 1169/2011 sets the labelling; and Regulation (EU) 2023/915 sets the contaminant limits. Enzymes used in food are dealt with under the food-enzyme Regulation (EC) No 1332/2008, and whether a supplement enzyme falls under that Regulation or is treated as an ingredient depends on how the product is presented. The Union list status, where it applies, has to be checked in the current text as of this review. Where the source or the production process falls outside what the novel-food Regulation (EU) 2015/2283 already covers, a novel-food authorisation question arises, and the buyer confirms whether the specific preparation is covered. The point is not academic for an enzyme: a plant extract and a fermentation product from the same catalytic family can sit on different sides of that question. ## United States A dietary supplement is regulated under DSHEA, and the ingredient route depends on its history. A dietary ingredient marketed in the United States before 15 October 1994 sits on the pre-DSHEA basis; an ingredient that is not has the new dietary ingredient notification route under 21 U.S.C. 350b. For a food use outside the supplement category, the GRAS route under 21 CFR 170.30 and 170.35 is the alternative. The supplier should be able to name the basis it relies on and point to the supporting document; the buyer confirms that the basis covers the finished product and the claim. The label is a separate review. The Supplement Facts panel follows 21 CFR 101.36 and declares the amount per serving. A structure or function statement is allowed only with substantiation and the required disclaimer, and the wording is reviewed by the brand, not by the certificate. ## United Kingdom Great Britain and Northern Ireland are checked separately. The GB file uses the retained law and the GB registers, while Northern Ireland follows the EU framework. The buyer's regulatory team confirms which of the two applies to the destination and keeps the evidence with the order. ## Contaminants and limits The contaminant panel is a finished-product calculation, not only a drum result. The table is the usual starting point for a food supplement; the current destination text and the daily dose decide the final limit. Contaminant limits to confirm for the finished product | Parameter | Typical supplement reference | What the file should show | Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method, limit and the finished-product calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception that applies | Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result and method | Arsenic (As) | Customer or market limit | The agreed limit and the method, stated on the certificate Microbiology for a food supplement is usually set by the specification and the customer rather than by a harmonised criterion, which is why the micro row belongs in the specification with counts and absence statements rather than a single pass mark. ## Claims and the label No disease-related claim is made for this material, and an activity figure is not a clinical statement. The label names the material, the quantity and, where required, the activity with its unit. Any wording about the finished product is reviewed by the brand's regulatory team for the destination, because the rules on health claims differ between the EU, the US and the UK. The word “antioxidant” deserves its own check. In the EU it is a nutrition claim tied to nutrients with an antioxidant property, and SOD is a protein rather than a vitamin or a mineral, so the claim does not transfer from a nutrient to an enzyme. In the US a structure or function statement needs substantiation and the disclaimer. In both markets the label wording is a separate decision from the specification, as of this review. ## Documents in the file - Specification with the activity, the unit definition, the source and the carrier named. - Certificate of analysis for the lot, with the results and the methods. - Technical data sheet and safety data sheet. - Allergen statement covering the carrier and the source, and a GMO statement. - Origin record and, for an animal-derived source, a TSE/BSE statement. - Residual-solvent statement where a solvent is used in the process. - Heavy-metal and microbiology results, and the change-control record. ## Checklist before the first order - Specification version, CAS number, source and activity are named. - The unit definition matches the customer's reference specification. - The lot certificate reports results, not only conformity. - The contaminant results are converted to the finished-product dose. - The label and any claim are reviewed for the destination. - Source, carrier, process and pack are under change control. The product page carries the catalog specification; the COA page explains the lot certificate; the identity page covers the analytical evidence; the regulatory note on the European Union gives the framework references; the quality page describes the release file. ### 06 How we prove a superoxide dismutase lot is the enzyme it names URL: https://nutrition.rainwoodbio.com/products/enzymes/superoxide-dismutase/identity/ Reviewed: 2026-11-19 A superoxide dismutase lot is identified when four measurements agree: the catalytic activity in a defined assay system, the protein content and pattern, the metal at the active site, and the lot record that ties the pack to the concentrate and the carrier. The activity alone is not enough, because a blend, a coloured plant extract or a small-molecule mimic can all produce inhibition in the assay without being the enzyme. Each layer answers a different question, and a supplier who answers only the first has described a number, not a material. In one lineIdentity is the agreement between activity, protein, metal ratio and lot record, because the assay alone can be satisfied by a blend or a mimic. ## The four identity layers None of the four layers is decorative. The document names the material; the assay shows catalysis; the protein measurements show that a protein is present and how large it is; the metal measurement shows which family of SOD the protein belongs to. A certificate that reports appearance and activity but nothing else has left the most likely substitution untested. Four layers of superoxide dismutase identity | Layer | Question | Test | What it proves | Document | Is the material and source named? | Name, CAS number, source, specification version | Paperwork only | Activity | Is there SOD catalysis? | Xanthine oxidase and NBT, 50% inhibition | Catalysis, not the protein | Protein | Is a protein present, and which? | Kjeldahl or colorimetric protein; SDS-PAGE; infrared amide bands | A protein and its size pattern | Metal | Which SOD family? | Copper, zinc, manganese and iron by ICP-MS | The active-site metal ## The copper-to-zinc ratio The common food-grade SOD is the copper-zinc enzyme. Each subunit carries one copper and one zinc, so a pure preparation shows the two metals at roughly equal molar amounts, and each is about 0.4% of the protein by mass. A lot that shows copper without zinc, or manganese alongside copper, is either a different enzyme family or a blend of two. The manganese enzyme is a tetramer with manganese at the active site and no copper or zinc; the iron enzyme carries iron. The metal panel therefore separates the families before any activity figure is discussed. A further check is available in the assay itself: the copper-zinc enzyme is inhibited by cyanide, and the manganese enzyme is not, which is a simple way to test a claim that a powder is the copper-zinc type. On a formulated powder the arithmetic is less friendly. At 10,000 U/g the protein is a small fraction of the mass, so the copper and zinc figures land in the low milligrams per kilogram, close to what a carrier can contribute on its own. Run the metal panel on the concentrate where possible, and run the carrier as a blank; a metal ratio read on a diluted powder without a blank is not evidence. ## What X-ray diffraction and infrared can show A protein powder is amorphous, so its X-ray diffraction pattern is a broad halo rather than a set of sharp reflections. That limits what the method can say about identity, but it does not make it useless: a sharp pattern in a powder that should be amorphous points to a crystalline diluent, an inorganic filler or a mineral carrier that the specification does not name. Ask for the pattern and the reference, not a line that says “XRD conforms”. Infrared spectroscopy is the more useful of the two here, and it is the method named on the catalog identification row. A protein gives amide bands, and the carrier gives its own fingerprint, so the spectrum shows whether a protein is present and which carrier it sits in. It does not tell SOD from another globular protein; that is the assay's job. Read the two together. ## What adulteration looks like Substitutions and the signals that expose them | Substitution | What it does | Signal | Carrier with a low enzyme load | Activity below the label | Low activity, low protein, low copper and zinc | Another protein | Protein present, no SOD catalysis | Activity absent; gel pattern does not match | Blend with another enzyme | A second activity in the powder | Assay the second enzyme; the SOD number describes one component | Polyphenol-rich extract | Apparent inhibition of the dye | Activity without protein or metal; matrix interferes with the assay | Small-molecule mimic | Catalysis with no protein | Protein assay and gel show nothing at the expected size The polyphenol case is the one that catches buyers. Many plant extracts reduce or inhibit the tetrazolium dye directly, so they read as SOD activity in the assay without containing the enzyme. A protein figure and a metal panel settle it, and a plant extract sold as SOD should always be accompanied by both. ## What to write into the identity specification - “Superoxide dismutase, CAS 9054-89-1, source named, activity ≥10,000 U/g with the unit definition.” - “Identification by activity assay and infrared spectrum, with the reference spectrum.” - “Protein content by a named method; SDS-PAGE pattern reported for the concentrate.” - “Copper and zinc by ICP-MS, with the carrier run as a blank.” - “No other enzyme declared unless specified; no carrier outside the declared one.” - “Lot code on the pack, the certificate and the retained sample.” ## Five questions for the supplier - Which source is this lot, and does the certificate name it? - What is the activity, on which assay system, and at what inhibition level was the sample read? - What is the protein content and the specific activity of the concentrate behind the blend? - What are the copper and zinc results, and was the carrier analysed as a blank? - Will you supply the gel image and the infrared spectrum, and accept a joint re-test on the retained sample? Five direct answers amount to an identity file. The product page carries the catalog specification; the COA page shows where each figure sits on the certificate; the unit page takes the assay definition apart; the catalase page covers the enzyme most often blended with this one; the method notes and the quality page carry the laboratory detail. ### 01 Reading a trypsin COA: activity, unit definition and the chymotrypsin limit URL: https://nutrition.rainwoodbio.com/products/enzymes/trypsin/coa/ Reviewed: 2026-11-19 A trypsin certificate reports appearance, identification, activity in USP units per milligram by the BAEE assay, the chymotrypsin figure, loss on drying, heavy metals, microbiology and particle size. The activity row is the only line that describes what the powder does, and it is a rate: it means little unless the substrate, the wavelength, the pH and the basis are printed with it. The limits in the table are the catalog specification; the lot certificate is the evidence for the pack that ships. In one lineA trypsin activity figure is a rate measured against BAEE at 253 nm, so the unit, the wavelength, the pH and the basis have to appear beside the number on the certificate. ## What each row has to establish Each line should answer three questions: what was measured, which method produced the number, and which limit the lot was released against. The activity line needs a fourth, the conditions of the assay. A certificate that prints “250 USP U/mg” under both limit and result has stated the specification twice and the measurement once. Catalog release limits · trypsin at ≥250 USP U/mg | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | BAEE activity assay and infrared spectrum | Conforms to the reference | Activity | BAEE substrate, 253 nm, pH 7.6, 25 °C | ≥250 USP U/mg | Chymotrypsin | ATEE substrate, 237 nm, pH 7.0, 25 °C | Ratio limit agreed on the specification; result in chymotrypsin units | Loss on drying | Gravimetric | ≤5.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh The chymotrypsin line is what separates a purified enzyme from a pancreas fraction. Both enzymes come out of the same tissue and co-purify, so a trypsin lot always carries some chymotrypsin activity. The limit belongs on the specification as a ratio of activities, and the result belongs on the certificate in chymotrypsin units, measured on the same lot as the trypsin figure. ## The unit is a rate, and the method defines it One USP trypsin unit is the amount of enzyme that raises absorbance at 253 nm by 0.003 per minute in the BAEE assay, at pH 7.6 and 25 °C. That is a rate, not a mass: a purer milligram produces a larger change and carries more units, and nothing in the figure says how much protein the pack contains. Two conventions sit around that definition and cause most of the confusion on a quotation. A BAEE unit is sometimes defined as a change of 0.001 per minute, one third of the USP unit, so a figure in BAEE units is three times the same figure in USP units. The “1:250” style designation used for some pancreatic powders is neither: it is a digestion designation, and suppliers apply it to different assays. Ask which unit and which method a number is in before comparing two offers. Four figures that a supplier may call trypsin activity | Figure | What it measures | What it can be compared with | USP U/mg | A253 rising 0.003/min with BAEE, pH 7.6, 25 °C | Another result from the same method | BAEE U/mg | A253 rising 0.001/min, otherwise similar conditions | Divide by three for the USP figure if the conditions match | Casein digestion ratio | A digestion designation, not a rate | Nothing in the BAEE series | U/mg protein | Specific activity on the protein fraction | Purity between lots, not strength per gram The basis is the other half of the number. Activity per gram of preparation as-is falls as moisture rises, so a result on the dried basis is about five per cent higher at the 5.0% loss-on-drying limit. The certificate should name the basis and the specification should say which one is contractual. Protein and specific activity form a third figure: units per milligram of protein tells a buyer whether the activity comes from a concentrated enzyme or a larger weight of powder, and it is rarely printed unless asked for. ## Where the limit ends and the result begins The limit is the gate; the result is the measurement. A one-sided limit such as ≥250 USP U/mg makes a lot at 251 and a lot at 900 equally compliant, and they are not equally useful: the lot near the floor has less margin for the loss between release and use. Ask two questions about the result: when the lot was released and what the retest period is, since the activity belongs to the release date; and whether the result was measured on the powder as packed or on a sample dried in the laboratory. For microbiology, the count and the absence statement need the method and the sample size beside them. ## Why two lots at 250 U/mg still differ Pancreas is a biological raw material: species, animal age and season all move the starting mixture. Activation of trypsinogen, the purification train, salt removal and drying then decide how much active enzyme reaches the powder. Autolysis is the specific risk here, because a warm or alkaline hold during processing digests the very enzyme the assay is meant to measure, and the loss shows up as low activity rather than as a visible defect. Milling and sieving add a change unrelated to the enzyme: the 40 mesh figure is a finishing specification and it moves when the mill or the sieve moves. Colour is a weak signal. White to off-white covers a wide window, and a slightly darker powder can come from a different drying step while the activity is intact. The chymotrypsin ratio varies most between sources, because it records how far the purification went rather than how the powder was dried; a shift across lots says more about the process than a small change in trypsin activity. ## When an outside laboratory is worth it Order an independent assay for a new source, a first regulated-market shipment, a disputed result, or a blend whose label depends on the activity. The panel should repeat the specification method rather than invent one: BAEE activity at 253 nm, protein and specific activity, a protein pattern by gel electrophoresis, the chymotrypsin assay, moisture, ICP-MS metals and a micro count. An outside result is comparable only when the method matches. If the laboratory changes the substrate, pH or temperature, the two numbers describe two assays. Ask for the raw rate, the enzyme weight and the calculation, and give the referee the retained sample and the specification together. ## Six lines for a supplier comparison Put these beside each other: species and tissue of origin; unit definition and method; measured activity and its basis; chymotrypsin ratio; protein and specific activity; moisture, mesh and pack. Offers that agree on 250 USP U/mg and disagree on the other five lines are not the same material. The catalog entry sits on the trypsin product page; the grades page compares activity grades, the identity page covers the evidence, the methods section holds the assay vocabulary, and the quality page describes release. ### 02 Which trypsin grade: activity, chymotrypsin content and form URL: https://nutrition.rainwoodbio.com/products/enzymes/trypsin/grades/ Reviewed: 2026-11-19 A trypsin grade is fixed by three things at once: the activity in USP units per milligram, the chymotrypsin activity that comes with it, and the physical form of the powder. The catalog grade here is a ≥250 USP U/mg, 40 mesh white powder that dissolves freely in water. A higher-activity preparation, a diluted or granulated powder, or a deliberate blend with chymotrypsin is a different purchase with its own specification and its own label. In one lineThe grade of a trypsin powder is set by its activity per milligram, its chymotrypsin content and its physical form, not by the word trypsin on the label. ## Three decisions behind one product name Trypsin is extracted from pancreas, where it sits beside chymotrypsin and a large set of other proteins. The purification train decides how much of the extract becomes active trypsin and how much chymotrypsin travels with it, and the drying and blending steps decide the activity per gram of the powder that is finally packed. “Trypsin” names the enzyme; it does not name the grade. Activity and purity are separate axes. A powder can be strong because it is pure, or strong because it has been concentrated and lightly diluted, and the two behave differently in a blend. The chymotrypsin ratio is a third axis that a single activity figure hides, and it is the one that matters when the specification is meant to describe a purified enzyme rather than a pancreas fraction. ## What changes between grades Trypsin grades and what changes for the buyer | Grade | Activity | Chymotrypsin | What changes for the buyer | Catalog powder | ≥250 USP U/mg, BAEE assay | Ratio limit agreed on the specification | The benchmark: 40 mesh, freely soluble, 1 kg and 25 kg packs | Higher-activity powder | Above the catalog figure, same method | Declared separately on the certificate | Smaller mass per unit and a tighter weighing window | Diluted powder | Lower per gram, carrier present | Follows the concentrate | A carrier on the label and a larger mass per unit | Granulated powder | Measured on the granule | Follows the concentrate | Less dust, slower dissolution, different mesh | Trypsin–chymotrypsin blend | Two figures, two units | Deliberate, not a limit | Two enzyme names and two unit systems on the label | Recombinant trypsin | Its own unit and method | Absent by construction | A fermentation source and a different file Only the first row is the catalog grade on this site. The others are separate purchases, and each has to be described by its own specification rather than as “trypsin” with a bigger or smaller number. A dilution is the clearest case: its activity per gram depends on the ratio of concentrate to carrier, so two powders at 100 USP U/mg can contain different amounts of enzyme if one carrier is heavier than the other. ## Powder, dust and solution The catalog powder is white to off-white and free-flowing, with at least 95% passing 40 mesh. It dissolves freely in water to a clear solution, which is useful for a stick pack or a liquid trial and irrelevant to a capsule, where the powder is weighed dry. Mesh matters in two places: blend uniformity, because a coarse granule segregates less, and dissolution, because a granule takes longer to wet out. The dust is a respiratory sensitiser, and the safety data sheet sets out the extraction and the protection that go with it. Granulation reduces the dust and improves flow, but it changes the particle-size line and the wetting time, so it is a specification change rather than a packing choice. The powder also picks up moisture, and a caked pouch is a handling problem before it is an assay problem. Keep the pack closed, weigh in a dry room and use the solution fresh, as the stability page sets out. ## Units per capsule, not milligrams The arithmetic is a division. Mass in milligrams equals the target units divided by the activity in units per milligram: 25,000 USP units need 100 mg of a 250 U/mg powder, 50 mg of a 500 U/mg powder, and 5 g of a blend that carries 5,000 U/g. A 500 mg capsule filled with the catalog powder carries about 125,000 units, which is why a formulator has to decide the target before the fill weight. No intake figure is implied by these numbers; they are the arithmetic that keeps the label, the weigh-up and the certificate in agreement. The blend's own assay decides the capsule mass, not the assay of the concentrate that went into it. With a high-activity powder the dose becomes small enough that homogeneity is the real problem, and a dilution or a granulation may serve the line better than a stronger concentrate. ## What to write into the purchase specification - “Trypsin, species of origin stated, CAS 9002-07-7, EC 3.4.21.4.” - “Activity ≥250 USP U/mg by the BAEE assay at 253 nm, pH 7.6, 25 °C; basis stated.” - “Chymotrypsin ratio limit in USP chymotrypsin units, measured on the same lot.” - “Identification by BAEE activity and infrared spectrum; protein and specific activity where agreed.” - “Loss on drying ≤5.0%; ≥95% through 40 mesh; heavy metals and microbiology as listed.” - “Carrier declared; no second enzyme unless named; species and TSE statement attached.” - “Pack and storage condition stated on the quotation.” ## When the catalog grade is the wrong choice If the line cannot weigh 100 mg accurately, a higher-activity grade makes the problem worse rather than better; a dilution with a declared carrier is the practical answer. If the label names two enzymes, buy the blend and ask for both assays, because a trypsin certificate does not cover the chymotrypsin that was added. If the market or the customer requires a non-animal source, the pancreas extract is not the material, whatever its activity. If the formula is a liquid that will be held for days, no grade solves the problem: the enzyme digests itself in solution, and the fix belongs to the process. The activity grades are compared with the neutral and alkaline protease ranges, which are separate enzymes with separate units, on the neutral protease and alkaline protease pages. The catalog entry sits on the trypsin product page, the release lines on the COA page, the two-enzyme question on the trypsin versus chymotrypsin page, and the packs on the MOQ page. ### 02.1 Trypsin vs chymotrypsin: two serine proteases, two units URL: https://nutrition.rainwoodbio.com/products/enzymes/trypsin/grades/trypsin-vs-chymotrypsin/ Reviewed: 2026-11-19 Trypsin and chymotrypsin are both serine proteases found in pancreatic juice, and the practical difference is where they cut. Trypsin cleaves on the carboxyl side of lysine and arginine; chymotrypsin cleaves after aromatic residues such as tyrosine, tryptophan and phenylalanine. Their activity units are defined on different substrates at different wavelengths, so a trypsin figure and a chymotrypsin figure cannot be converted, added or compared. A product that contains both is a blend with two assays, not a stronger trypsin. In one lineA trypsin unit and a chymotrypsin unit are defined by different substrates at different wavelengths, so the two numbers cannot be converted, added or compared. ## Two unit definitions, side by side Both are called USP units, and they measure different events. The trypsin unit is an absorbance change at 253 nm with BAEE as the substrate; the chymotrypsin unit is an absorbance change at 237 nm with ATEE. The conditions differ as well, including the pH. The two unit definitions that a certificate can print | Enzyme | EC number | Substrate | Wavelength | Conditions | One unit is | Trypsin | 3.4.21.4 | BAEE | 253 nm | pH 7.6, 25 °C | A rise of 0.003 absorbance per minute | Chymotrypsin | 3.4.21.1 | ATEE | 237 nm | pH 7.0, 25 °C | A change of 0.0075 absorbance per minute The chymotrypsin unit is defined on a larger absorbance change, and it is tempting to divide one figure by the other to convert them. That would be wrong. The substrate, the wavelength and the absorptivity of the product all differ, so the two numbers are not on a common scale. A supplier who offers a conversion factor between them is describing a habit, not a definition. ## What each assay has to print A kinetic assay is only reproducible when the reader can repeat it. The certificate should name the substrate and its concentration, the buffer and pH, the temperature, the path length and the reaction volume, and it should report the absorbance change per minute together with the enzyme weight that produced it. The calculation to units per milligram, and the basis on which that milligram was weighed, complete the entry. The trypsin assay is commonly run in a 3.2 mL reaction in a 1 cm cuvette at 25 °C, and the chymotrypsin assay in a comparable cell at 237 nm. Both need the initial rate rather than an endpoint: a fixed-time reading taken after the reaction has left its linear phase reports a lower rate, and the error is invisible unless the raw trace is requested. Ask for the trace when a result is disputed, not only the final figure. ## Why the cleavage site decides the use Both enzymes carry the same catalytic triad, a histidine, an aspartate and a serine, and the difference sits in the binding pocket that reads the side chain before the cut. Trypsin's pocket holds an acidic residue at its base, which attracts a basic lysine or arginine side chain. Chymotrypsin's pocket is lined with hydrophobic residues and prefers an aromatic side chain, with leucine and methionine accepted more slowly. The consequence is a different peptide profile from the same protein. A hydrolysate made with trypsin ends more of its peptides at lysine and arginine; one made with chymotrypsin ends them at aromatic residues. For a process that is designed around a peptide size or a functional property, the two enzymes are not interchangeable, and a blend produces a third profile rather than an average of the two. ## Both digest themselves, at different rates Autolysis is the failure mode that the two enzymes share, and it runs fastest near pH 8 for both, which is close to the pH at which they are assayed. A warm, alkaline hold therefore attacks the enzyme that the assay is measuring. Trypsin is stabilised by calcium, so a buffer with a calcium salt holds its activity longer, while a chelator in the same buffer removes the calcium and speeds the loss. In a two-enzyme product the ratio is the thing to watch. If one enzyme loses activity faster than the other, the blend drifts away from its declared ratio even while each figure stays inside a wide limit. Measure both activities separately at each stability time point; a total protease figure hides exactly the change that matters. Heat, water activity and pH act on both enzymes, and the pack that protects one protects the other. ## Ratios belong in units, not in milligrams Combination products are usually described by an activity ratio, such as equal trypsin and chymotrypsin units, or a multiple in favour of trypsin. The ratio is a ratio of units, and it is not a ratio of masses: each powder carries its own units per milligram, so a 1:1 unit blend weighs different amounts of the two materials. A specification written as “equal parts” has not fixed the ratio that the assay will measure. The same logic applies inside a trypsin lot. The chymotrypsin that co-purifies is limited as a ratio to the trypsin activity, because a mass percentage would say nothing about how much activity travelled with it. When a certificate gives one figure and no ratio, the reader cannot tell whether the powder is a purified enzyme or a pancreas fraction that happens to pass the trypsin limit. ## What the label and the specification must name If both enzymes are present, both are named, each with its own activity and unit. “Protease” alone hides the identity that the specification has just established, and a single combined figure cannot be checked against either assay. The species and tissue of origin belong on the specification for the same reason: the two enzymes are pancreatic, and the source is part of what the buyer is buying. A trypsin certificate may carry a chymotrypsin result as a purity limit rather than as an ingredient. That is a different statement from a blend, and the label should make the difference clear: a limit describes what was kept out, a blend describes what was put in. The carrier belongs on the label as well, because a diluted or granulated powder adds a material that the certificate does not describe as an enzyme. ## Choosing between them Start with the bond that has to be cut. A process that needs cleavage at lysine and arginine points to trypsin; one that needs cleavage at aromatic residues points to chymotrypsin. If the process needs both, buy a blend with two assays and two limits rather than a trypsin powder with an unstated chymotrypsin content. If the target is simply “proteolysis”, neither pancreatic enzyme may be the right catalyst, and the neutral and alkaline proteases work at different pH values and carry different units. The catalog entry is on the trypsin product page; the grades page covers the powder options, the identity page covers the evidence, and the COA page covers the release lines. The neutral protease and alkaline protease entries show how far the unit definitions move between enzymes, the assay vocabulary is in the methods section, and the quality page describes release. ### 03 Trypsin stability: autolysis, moisture and the pack URL: https://nutrition.rainwoodbio.com/products/enzymes/trypsin/stability/ Reviewed: 2026-11-19 Trypsin is stable as a dry powder in a sealed pack and unstable in solution, where it digests itself. Autolysis runs fastest near pH 8, the pH at which the enzyme is also most active, and heat and moisture accelerate the loss. The retest period has to be assigned from data for the exact pack, storage condition and matrix, because a bulk figure does not survive a change of pack. In one lineTrypsin loses activity to heat, moisture and its own autolysis, and the pack plus the storage temperature decide how much is left at the end of the retest period. ## The dry pack is the reference state Below a certain water activity the enzyme is essentially immobile, and the dry powder is stable enough that the loss shows up over months rather than days. The catalog limit of ≤5.0% loss on drying is a release gate, not a storage allowance: a powder at 4.8% at release can pass 6% in a humid warehouse without any change in the certificate. Water is the variable to control, and water activity predicts the behaviour better than loss on drying alone. The pack is the control. The 1 kg foil pouch is the moisture barrier, and the 25 kg fiber drum relies on its inner liner; both need closing between weighings, and a desiccant helps where the pack design allows one. A humid weighing room, an open pouch over a weekend or a drum left against a heated wall does more harm in a week than a year on a cool shelf, and resealing restores none of it. Heat is the second driver. Prolonged heat above about 50 °C starts to inactivate the enzyme, and steam is worse than dry heat because it brings water and temperature together. Light is a minor factor for a protein powder, and the foil that blocks moisture blocks light as well. ## The solution is the unstable form In water, trypsin is at work, and its own peptide bonds are part of the substrate. Autolysis is fastest near pH 8, so a solution held at the pH of the assay is a solution that is digesting itself. The clear solution that the powder gives is a solubility statement, not a stability one. Calcium slows the process by stabilising the fold, which is why a formulation buffer often carries a calcium salt. The reverse is also true: a chelator such as EDTA removes the calcium and the enzyme loses activity faster. If a liquid hold is unavoidable, keep it short and cold, make it up fresh, filter it rather than heat-sterilise it, and measure activity after the hold rather than assuming the powder figure carries through. Two more losses belong to the same step. Foam denatures protein at the air interface, so high-shear mixing costs activity, and a dilute solution can adsorb to filters and container walls. Freeze–thaw cycles add a third, and a solution that has been frozen, thawed and left standing is not the same test as one used immediately. ## What drives the loss Stability factors for trypsin and the control that belongs with each | Factor | Effect | Control | Water activity | Allows autolysis and unfolding; causes caking | Sealed pouch, liner, desiccant, dry weighing room | Temperature | Faster autolysis and denaturation | Store at 25 °C or below; 2–8 °C for a long hold; cool process steps | pH | Autolysis peaks near pH 8; extremes unfold the protein | Validate the hold pH; avoid an alkaline hold | Calcium | Stabilises the enzyme and slows autolysis | Calcium in the buffer where the process allows | Chelators | Remove calcium and speed the loss | Check EDTA and citrate in the blend and the buffer | Shear and foam | Surface denaturation | Low-shear mixing; avoid over-mixing a solution | Microbial load | The powder is a nutrient; a liquid can support growth | Micro limits, a closed pack, a validated preservative in liquids The rows interact. A warm, humid store acts on water and heat at once, and a solution at pH 8 in a warm room combines the two fastest routes to loss. The useful question is not whether trypsin is stable, but which pack and which matrix keep it inside the specification for the stated period. ## A protocol for the powder and the pack A stability programme needs real-time arms at 25 °C/60% relative humidity and 30 °C/65% relative humidity, an accelerated arm at 40 °C/75% relative humidity, and a cold arm at 2–8 °C if the pack will be sold with a cold-chain instruction. Test activity by the specification method, loss on drying, appearance and microbiology at 0, 3, 6, 9, 12 and 24 months. Accelerated heat stresses the pack and the drying step, and it does not replace real time: autolysis needs water, so a sealed dry pack at 40 °C is testing something different from a solution at 40 °C. Run a separate solution arm at the process pH and temperature, with the hold times the plant actually uses, and assay before and after each hold. Report the individual results and identify the pack and the lot family, not a single pass statement. ## The finished formula decides the rest In a capsule or a tablet the water activity is low, but the excipients and the shell can still pass moisture across. Check loss on drying at release and after storage, and check the fill's appearance; a soft or mottled capsule is a warning before the assay is run. Direct compression avoids the water of a wet granulation, and a dry binder is easier on the enzyme than an aqueous one. In a powder blend, a hygroscopic carrier raises the water activity of the whole mix, and an acidic active such as ascorbic acid or citric acid pulls the local pH down. A chelator in the blend removes the calcium. Those three effects are enough to lose activity in a pack that would protect the enzyme on its own. A blend that carries another protease also needs its own assay, because a general protease method reads the blend rather than the trypsin in it. A beverage is the hardest case: water, a pH to control and a heat step in the same process. Where a liquid is unavoidable, validate the hold and the shelf life in the drink, and let the formulator decide whether an overage is needed and how it is declared. ## How the retest period is set There is no single shelf-life number for trypsin, because the pack, the storage condition and the matrix set it. The retest period is written on the specification, and the data behind it has to come from that pack. A declaration should separate the activity at release from the activity promised at the end; they are two different commitments. After the retest period, re-assay the retained sample before extending use, and do not move a bulk figure onto a container that was filled somewhere else. The catalog entry sits on the trypsin product page; the COA page covers the release lines, the MOQ page covers packs and storage on arrival, the assay vocabulary is in the methods section, and the quality page describes the release workflow. ### 04 Trypsin MOQ, packs and the order that follows URL: https://nutrition.rainwoodbio.com/products/enzymes/trypsin/moq/ Reviewed: 2026-11-19 The trypsin MOQ is 1 kg in a single foil pouch, and the bulk pack is a 25 kg fiber drum. The standard pack ships in 1–7 days. A firm quotation needs six details: the enzyme and its species of origin, the activity and the method behind it, the chymotrypsin ratio, the quantity and pack, the destination and Incoterm, and the documents with the intended use. In one lineOne kilogram is the minimum because that pack can be sampled, assayed and traced as a lot before the first production order. ## Why the minimum is 1 kg A kilogram covers a bench trial, a retained sample and an activity assay in the buyer's own laboratory, and the BAEE method needs very little material per test. It is also small enough to travel as a parcel, which matters when a formulator needs powder before the production plan is fixed. The pack carries a lot code, so the sample, the certificate and the trial result can be tied together. Below a kilogram, powder is usually split from a larger lot and repacked. It adds a handling step, detaches the powder from its original pack identity and makes the lot harder to trace, while the chemistry stays the same. The drum is the production pack. It cuts handling per kilogram, and it also locks inventory into a material with a finite retest period. A drum bought for a small trial is activity that ages on the shelf, so the pack should follow the consumption rate. ## Packs and formats Standard trypsin packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; close it between weighings | Fiber drum | 25 kg | Production | Liner stays closed; the lot code is repeated on the liner | Granulated powder | On request | Flow and dust control | Particle profile and wetting time change | Diluted powder | On request | Lower activity per gram | Carrier and label change The catalog form is a 40 mesh powder, at least 95% through the sieve. Granulation or dilution is a different specification rather than a packing choice, because it moves the particle-size line, the carrier statement and the activity per gram. Raise the need for a coarser or freer-flowing powder before the quotation; a granulation step also adds days. ## Lead time and dispatch The catalog grade is quoted at 1–7 days from order and specification confirmation. That window covers picking, document preparation and dispatch; it does not include transit, customs clearance or the buyer's own quality release. A granulation or a dilution adds time and should be quoted separately. Pin the dispatch date in the order confirmation, not just the lead-time window. The COA, the specification, the safety data sheet and the species and TSE statement should travel with the lot rather than follow it, because a certificate that arrives after the drum delays the release. The Incoterm decides who books the freight and who clears the entry, and a hot loading bay or a truck parked in the sun is a stability event on the way in. ## What a quotation needs Six items make an offer firm enough to compare: - Product and species. Trypsin, CAS 9002-07-7, with the species and tissue of origin written out. - Activity and method. USP units per milligram by the BAEE assay, with the pH, wavelength and basis. - Chymotrypsin ratio. The limit on the specification and the result on the certificate. - Quantity and pack. 1 kg foil pouch, 25 kg fiber drum, or a granulated or diluted powder. - Destination and Incoterm. The country, the address or port, and the trade term. - Documents and use. The document list and the market in which the finished product will be sold. The quotation carries the commercial terms; this page carries the technical ones. A quotation without the species of origin or the chymotrypsin line is incomplete, because neither can be inferred from the word trypsin. ## A sample has to be a lot The qualification sample is the 1 kg pack itself. Assay it by the method the specification names, keep a retained portion, and compare the result with the certificate that came with the pack. The lot code on the sample, the COA and the quotation should match; a sample that cannot be traced to a lot is a demonstration. A smaller bench quantity is a repack, not the catalog pack, and it should be documented as one. Do not assume that a bench sample and the production drum come from the same lot, and do not qualify a supplier on a sample that was drawn from a different grade. ## Terms to settle before the first order The commercial terms, the Incoterm, the pack and the lead time sit on the quotation. Quality terms sit alongside: the specification revision, one certificate per lot, the retained sample, the retest period and the route for a change. A quality agreement before the first production order is easier than a dispute after it. Returns follow the quotation and the quality agreement. A lot that fails the agreed specification should be resolved through the retained sample and a joint re-test at a laboratory both sides accept, not through a photograph of the powder. State the storage condition on arrival as well: dry, cool and closed, with the opening date recorded on the pack. The catalog entry is on the trypsin product page; the COA page lists the release tests, the stability page covers storage and pack behaviour, the compliance page covers the source documents, the term is defined in the MOQ glossary entry, and the quality page describes release. ### 05 The regulatory file for trypsin URL: https://nutrition.rainwoodbio.com/products/enzymes/trypsin/compliance/ Reviewed: 2026-11-19 Trypsin is an enzyme preparation obtained from pancreas, and its regulatory file is built around three things: the source, the specification and the market. The source decides the species and the TSE statement, the specification decides the activity and the contaminant panel, and the market decides the route and the label. The buyer's regulatory team confirms that route for the destination; this page lists the frameworks and the documents the file will need. In one lineThe specification describes the powder; the regulatory file has to name the source species, the TSE statement and the route for the destination. ## What the file contains A usable file answers four questions, in this order. Which material is being bought, and at which specification revision? Which lot is on the dock, and what did its certificate measure? Which limits and which label rules does the destination apply to the finished product? What happens to the file if the source, the carrier or the granulation changes? The lot certificate covers the second question, the technical data sheet the first, and the safety data sheet the handling in the warehouse. The route question is answered by none of the three. Three statements are specific to an animal-derived enzyme and belong in every file: the species and tissue of origin, a TSE statement for the pancreas material, and a statement on the carrier. The carrier matters because a lactose carrier brings a milk allergen with it, and the allergen statement should name the carrier rather than the enzyme alone. ## European Union Regulation (EC) No 1332/2008 is the framework for food enzymes, including enzymes used as processing aids, and it provides that a food enzyme must be on the EU list before it is placed on the market. The list is being established in parts, and the European Food Safety Authority has published safety evaluations of trypsin preparations, including one from porcine pancreas. Whether a particular preparation and use are covered is confirmed by the buyer's regulatory team; check the current text and the current list before relying on either. Two further instruments sit beside it. Regulation (EC) No 999/2001 governs transmissible spongiform encephalopathy risk for animal material; pancreas is not on the specified-risk-material list, but the regulation still applies to the source and the process, and the file needs the species, the tissue and the source-country statement. Regulation (EU) No 1169/2011 governs labelling: an enzyme used as a processing aid that performs no technological function in the final food is not declared, while an enzyme that is an ingredient of a supplement is. The label route for a supplement is a member-state question as well, and it is checked for the destination. ## United States Title 21 of the Code of Federal Regulations, section 184.1914, affirms trypsin — an enzyme preparation obtained from purified extracts of porcine or bovine pancreas — as generally recognized as safe for direct addition to food under current good manufacturing practice. That affirmation is a food-use basis. Whether it covers a particular supplement, and which preparation, is a question for the buyer's regulatory team, and the current text of the section should be read rather than a summary. For a dietary supplement, the ingredient is declared under the framework that applies to dietary ingredients. A new dietary ingredient question turns on the marketing history of the ingredient before 15 October 1994, and the buyer's regulatory team documents that history with the supplier's support. The label panel, the other-ingredient list and the claim wording are reviewed separately from the certificate. ## Contaminants and limits The catalog limits are release gates for the powder. The file also has to show the finished-product calculation, because a limit that is comfortable per kilogram of powder can be tight once the daily dose is taken into account. Catalog limits and what the finished-product file should show | Parameter | Catalog limit | What the file should show | Lead (Pb) | ≤3 mg/kg | Lot result, method and the calculation at the daily dose | Arsenic (As) | ≤2 mg/kg | Lot result and the limit agreed for the market | Cadmium (Cd) | ≤1 mg/kg | Lot result and any category exception | Mercury (Hg) | ≤0.1 mg/kg | Lot result and method | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | The count, the absence statement and the test method | Loss on drying | ≤5.0% | The measured figure, since water dilutes the activity per gram ## Claims and the label No disease-related claim belongs on a product that contains trypsin, and the enzyme's activity is not a clinical effect. A structure or function wording is reviewed by the brand's regulatory reviewer for the market, the form and the finished product, and that review is separate from the certificate. The certificate reports what the lot measures; it does not approve a sentence on a label. Two wording habits cause trouble. One is to describe the enzyme by what it digests rather than by what it is, which slides towards a physiological claim. The other is to use “protease” on the panel when the ingredient is trypsin, which hides the identity the specification has just established. Name the enzyme and its source, and keep the claim with the reviewer. ## Documents in the file Documents to request with the first lot | Document | What it establishes | Ask for it when | Specification | The version, the activity, the method and the limits | Before the quotation is accepted | COA | The results for one lot | With every lot | Technical data sheet | Form, solubility, storage and pack | At qualification | Safety data sheet | Dust, sensitisation and handling controls | At qualification, and for the warehouse | Species and TSE statement | The animal source and the BSE/TSE position | Before the first shipment | Allergen and carrier statement | What the carrier is and what it may carry | Before the label is written | GMO and origin statement | The process and the manufacturing site | At qualification | Residual solvent statement | What was used in the purification | Where the market requires it ## Checklist before the first order - The specification names trypsin, the species of origin, the CAS number and the activity method. - The COA, the TDS and the SDS are on file with version numbers. - The TSE statement, the allergen statement and the carrier are confirmed. - The contaminant results have been converted to the daily dose of the finished product. - The label wording and the claim have had a review for the destination market. - Change control covers the source, the carrier and any granulation step. The catalog entry is on the trypsin product page; the COA page explains the lot certificate, the identity page covers the analytical evidence, and the EU and US notes summarise the frameworks. The quality page describes the release file. ### 06 How a trypsin lot is proved URL: https://nutrition.rainwoodbio.com/products/enzymes/trypsin/identity/ Reviewed: 2026-11-19 A trypsin lot is identified by four pieces of evidence that agree: the document names the enzyme and its species of origin, the BAEE activity assay shows the expected rate, the protein pattern shows a band near 23 kDa, and the chymotrypsin ratio stays inside the agreed limit. No single line proves identity, and the activity figure is the easiest one to produce. The agreement between the lines is what makes the file worth reading. In one lineA trypsin lot is proved by its activity against BAEE, its protein pattern and its chymotrypsin ratio, not by the name on the drum. ## The four identity layers A certificate can carry the right name and still describe a different powder. Each layer below answers a separate question, and a supplier who answers only the activity has described a rate, not a material. Four layers of trypsin identity | Layer | Question | Test | What it proves | Document | Is the material named, and from which species? | Name, CAS 9002-07-7, species and tissue statement | Paperwork only | Activity | Is the enzyme active against a tryptic substrate? | BAEE assay at 253 nm, pH 7.6, 25 °C | A protease with trypsin-like specificity | Protein | Is the protein the expected size? | Gel electrophoresis under reducing conditions | A band near 23 kDa, not a fungal or plant protease | Counter-activity | How much chymotrypsin travels with it? | ATEE assay at 237 nm | How far the purification went | Mass balance | Is the powder diluted, wet or partly inactive? | Protein, loss on drying, carrier check | Consistency of the other four lines ## The two ratios that matter The first is chymotrypsin activity against trypsin activity. The two enzymes are extracted from the same tissue and co-purify, so a trypsin lot always carries some chymotrypsin; the ratio records how much. A high ratio points to a pancreas fraction that was separated only roughly, and a low ratio points to a purification step that removed the companion enzyme. Either can be inside the trypsin activity limit, which is why the ratio belongs on the specification. The second is specific activity: units per milligram of protein. A high protein figure with a normal activity means inactive protein, an incompletely activated precursor or a foreign protein; a low protein figure with a normal activity means a purer preparation. Trypsinogen is the specific case to watch, because it is the inactive precursor of trypsin and it adds mass without adding BAEE activity. An activation step that was cut short shows up here, not in the activity value. Read the two ratios together and they sort the failure modes. High chymotrypsin with normal trypsin is a separation problem. Normal chymotrypsin with low specific activity is an activation or a handling problem. Both ratios low or both high across several lots says more about the supplier's process than any single certificate. ## X-ray diffraction is a weak tool here Trypsin is supplied as an amorphous powder, so an X-ray diffraction pattern is a broad halo rather than a set of sharp reflections. It cannot identify the enzyme, and a certificate that offers “XRD conforms” as identity evidence for trypsin has offered a method that is not suited to the question. The technique has one real use in this file: finding a crystalline diluent. Lactose monohydrate, dextrose and sodium chloride all give sharp patterns, so a trypsin powder that was cut with a carrier can show them even when the activity per gram has been adjusted to look normal. Before accepting a match statement, ask which reference pattern was used and how much crystalline material the method can see; a crystalline pattern in a powder sold as carrier-free is a question, not a result. The identity test in the catalog is the BAEE activity assay together with an infrared spectrum, and the infrared comparison is a similarity check on the protein's amide bands rather than a sequence. For a disputed lot, peptide mass fingerprinting by mass spectrometry or N-terminal sequencing answers the identity question that neither infrared nor diffraction can. ## What substitution looks like Common trypsin substitutions and the signal that exposes them | Substitution | What it does | Signal | Test | Chymotrypsin-rich pancreas fraction | Keeps the trypsin activity, adds a companion enzyme | Chymotrypsin ratio above the agreed limit | ATEE assay on the same lot | Another protease | Shows activity in a general protease method | No band near 23 kDa; different substrate profile | Gel electrophoresis and a substrate panel | Inert carrier | Lowers activity per gram without changing the appearance | Low activity with a high ash or a carrier pattern | Loss on drying, ash, infrared, diffraction | Autolysed or heat-damaged powder | Protein present, activity partly gone | Specific activity below the expected range | Protein and BAEE assay on the same sample | Undeclared species | Mismatch between the label and the pancreas source | Species statement inconsistent with the file | Supplier documents; species-specific test where needed Autolysis leaves a second trace. A gel of a partly autolysed lot shows the main band plus a ladder of lower-molecular-weight fragments, because the enzyme has been cutting itself. That pattern is a useful check on a powder that was held warm or at alkaline pH before drying. ## What to write into the specification - “Trypsin, species and tissue of origin stated, CAS 9002-07-7, EC 3.4.21.4.” - “Activity ≥250 USP U/mg by the BAEE assay at 253 nm, pH 7.6, 25 °C; basis stated.” - “Identification by BAEE activity and infrared spectrum compared with a reference.” - “Chymotrypsin activity limited as a ratio to the trypsin activity, measured on the same lot.” - “Protein and specific activity reported where agreed, with the method named.” - “Loss on drying ≤5.0%; carrier declared; no second enzyme unless named.” - “Species and TSE statement attached to every lot.” ## Five questions for the supplier - Which species and tissue is this lot from, and where is that stated on the certificate? - What are the trypsin and chymotrypsin results on the same lot, and in which unit systems? - Can you provide the protein figure, the specific activity and a gel image, not only the activity? - Was the trypsinogen activation step complete, and how is that shown on the record? - If the lot is disputed, will you re-test the retained sample with me, using the same method? Five written answers make an identity file. The catalog entry is on the trypsin product page; the COA page explains how each figure is reported, the grades page compares the powder with a blend, the trypsin versus chymotrypsin page takes the two-enzyme question further, the assay vocabulary is in the methods section, and the quality page describes release. ### 01 Reading a chymotrypsin COA: the ATEE unit and the trypsin limit URL: https://nutrition.rainwoodbio.com/products/enzymes/chymotrypsin/coa/ Reviewed: 2026-11-19 A lot certificate for chymotrypsin has to show what the powder is, how active it is and how clean it is: appearance and identity, ATEE activity in USP units per milligram, the trypsin result, moisture, metals, microbiology and mesh. Activity is a rate, not a mass, so the figure needs its substrate, wavelength, pH, temperature and basis to mean anything. The limits below belong to the catalog specification; the certificate for a lot is what confirms the pack that ships. In one lineA chymotrypsin figure is a rate measured on ATEE at 237 nm, so the unit definition, the assay conditions and the dried basis have to be read with the number. ## What each row has to establish A certificate earns its place when every line can be checked: what was measured, by which method, against which limit. A row that reads “conforms” without a result asks the reader to trust a conclusion. Release limits for the catalog grade (≥1,000 USP U/mg) | Parameter | Release limit | Method | Appearance | White to off-white powder | Visual check | Identification | Conforms to the reference | ATEE assay plus infrared spectrum | Activity | ≥1,000 USP U/mg | ATEE, 237 nm, pH 7.0, 25 °C; basis stated | Trypsin | Ratio limit agreed; result in trypsin units | BAEE, 253 nm, pH 7.6, 25 °C | Loss on drying | ≤5.0% | Gravimetric | Heavy metals | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | ICP-MS | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Plate count plus absence tests | Particle size | ≥95% through 40 mesh | Sieve analysis The trypsin result is the clearest sign of how far purification went. Chymotrypsin and trypsin are recovered from the same gland and tend to travel together, so a chymotrypsin lot contains some trypsin unless a separation step took it out. The specification should cap that companion activity as a ratio, and the certificate should report it in trypsin units from the same lot. ## The unit, the substrate and the dried basis Two conventions decide whether the activity number can be compared. The first is the unit. One USP chymotrypsin unit is the activity that causes a change in absorbance of 0.0075 per minute at 237 nm, with ATEE as the substrate, at pH 7.0 and 25 °C. That is a rate, not a weight, so a purer milligram produces a larger change and carries more units. The second is the basis. The USP monograph sets not less than 1,000 USP chymotrypsin units per milligram calculated on the dried basis, and it sets the labeled potency at 90.0 to 110.0 per cent. A result on the dried basis is higher than the same powder measured as-is, because the calculation divides by the dry matter; at the 5.0% loss-on-drying limit the gap is about five per cent. The certificate should carry the basis in the assay row rather than a footnote. Quotations can carry a different unit under the same word. The table sorts the four figures a buyer may see. Four figures that may be called chymotrypsin activity | Figure | What it measures | What it can be compared with | USP U/mg | A237 changing 0.0075/min with ATEE, pH 7.0, 25 °C | Another result from the same method and basis | BTEE U/mg | A256 with BTEE as the substrate | Only another BTEE result; not a USP figure | U/mg protein | Activity divided by the protein content | How pure the preparation is, not how strong it is per gram | Units per gram of blend | Activity of a diluted or blended powder | The blend's own certificate, not the concentrate The BTEE substrate and wavelength differ, so no factor converts one figure into the other. ## Where the release limit ends and the result begins The catalog limit is one-sided: at least 1,000 USP U/mg. A lot at 1,005 and a lot at 1,600 both pass, but the first has less margin for the loss between release and use. The labeled-potency window of 90.0 to 110.0 per cent is a second gate that a single activity figure does not cover. What the result column should contain | Parameter | Release limit | Result column | Activity | ≥1,000 USP U/mg | A measured figure, the basis, the method and the release date | Trypsin | Ratio limit | A measured figure in trypsin units on the same lot | Loss on drying | ≤5.0% | A measured percentage | Heavy metals | Per element | A figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot “Passes specification” is a conclusion, and the reader should be able to reach it from the numbers. Microbiology is evidenced by a count and an absence statement; heavy metals need a figure for each element, because a combined total hides which metal is present. ## Why two lots at 1,000 U/mg differ The gland is a biological raw material, and the species, the age of the animal and the season shift the starting mixture. How the zymogen is activated, how the separation is run, how salt is removed and how the powder is dried all determine the activity that survives into the pack. Self-digestion is the particular hazard: a warm or alkaline hold can consume the very enzyme being made, and the result is a low activity figure with no visible defect. Milling and sieving add a change unrelated to the enzyme. The 40 mesh line is a finishing specification, so it moves when the mill or the sieve moves. Colour says little. White to off-white is a broad window, and a darker shade may simply reflect a different drying route while the activity is unchanged. The trypsin ratio is the figure most likely to differ between suppliers, because it reflects the depth of the separation rather than the drying step. Check that one lot code appears on the certificate, the pouch or drum, and the retained sample. ## When an outside assay is worth it Commission an outside test when a source is new, when a lot is the first into a regulated market, when a result is disputed, or when a blend's label rests on both enzymes. The laboratory should run the specification method rather than improvise: ATEE activity at 237 nm, protein and specific activity, a gel pattern, the trypsin assay, moisture, ICP-MS metals and a micro count. An outside result is comparable only when the method matches: a different substrate, wavelength, pH or temperature describes a different assay. Ask for the raw rate, the weighed enzyme mass and the arithmetic, and supply the referee with both the retained sample and the specification. ## What to compare between suppliers Set six items side by side: source and species; unit definition and method; measured activity and its basis; trypsin ratio; protein and specific activity; moisture, mesh and pack. Two offers can print the same 1,000 USP U/mg and still describe different materials if the other five lines diverge. The catalog entry sits on the chymotrypsin product page; the grades page sets out activity and form, the identity page shows the supporting analyses, the methods section explains the assay terms, and the quality page describes how release is handled. ### 02 Which chymotrypsin grade: activity, trypsin content and form URL: https://nutrition.rainwoodbio.com/products/enzymes/chymotrypsin/grades/ Reviewed: 2026-11-19 The catalog grade is a purified chymotrypsin powder at ≥1,000 USP U/mg by the ATEE assay, white to off-white, at least 95% through 40 mesh and freely soluble in water. A crystallised preparation with a higher activity, a diluted or granulated powder, a trypsin–chymotrypsin blend or a fermentation-derived food enzyme is a different purchase, with its own assay, carrier statement and label. In one lineA chymotrypsin grade is fixed by three numbers and one form: activity, trypsin limit, specific activity and the physical state of the powder, not by the word chymotrypsin alone. ## Why the name does not fix the grade Chymotrypsin is extracted from pancreas, where it sits beside trypsin, carboxypeptidases, amylase and lipase. The zymogen chymotrypsinogen is activated by trypsin, and the purification train then decides how much active chymotrypsin and how much trypsin travel into the powder. Drying and blending set the activity per gram of the material that is finally packed. “Chymotrypsin” names the enzyme; it does not name any of those steps. The word “alpha” is often added, and it describes a crystallised form of the enzyme rather than a purity grade. Two alpha-chymotrypsin powders can differ in activity, in trypsin content and in salt load. Activity and purity are separate axes, and the trypsin ratio is a third axis that a single activity figure hides. ## What changes between grades Chymotrypsin grades and what changes for the buyer | Grade | Activity | Trypsin | What changes for the buyer | Purified powder, catalog | ≥1,000 USP U/mg by ATEE | A ratio cap written into the specification | The reference grade: 40 mesh, water-soluble, 1 kg and 25 kg | Higher-activity crystallised | Higher figure, same ATEE method | Shown as its own result | Less powder per dose and a narrower weighing range | Cut with a carrier | Fewer units per gram | Set by the concentrate | Carrier named on the label; more powder per dose | Granulated | Assayed on the granule | Set by the concentrate | Lower dust, slower wetting, new mesh | Chymotrypsin with trypsin | One figure per enzyme | Intended, not a cap | Both enzymes and both unit systems declared | Fermentation-derived | Defined by its own method | No animal companion | A production organism and a separate file The first row is the grade catalogued here; the rest are distinct products, each needing its own specification instead of the word “chymotrypsin” with a different number attached. Dilution shows why: the units per gram depend on how much carrier was added, so two diluted powders with the same declared strength may contain different amounts of enzyme. ## Powder, dust and dissolution The catalog material is a white to off-white, free-flowing powder; at least 95% of it passes through 40 mesh. In water it gives a clear solution, an advantage in a liquid trial or a stick pack and a minor point in a capsule, where the fill is weighed as a solid. Particle size matters twice: coarser granules segregate less in a blend, and they also take longer to wet out. Airborne powder is a respiratory sensitiser, and the safety data sheet names the extraction and protective measures. Granulation lowers dust and improves flow, but it alters the sieve result and the wetting time, so the change belongs in the specification. The solid also takes up moisture, and lumps in the pouch interfere with weighing long before they affect a certificate. ## Dose arithmetic in units, not milligrams Convert the label target into a mass by dividing the target units by the activity on the certificate. A capsule filled with 500 mg of the catalog powder contains at least 500,000 USP units; a target of 250,000 units needs 250 mg of the same powder. A blend that carries 5,000 U/g needs 100 g for 500,000 units, which is why a blend is bought on its own assay rather than on the concentrate's figure. These are arithmetic examples, not a dose recommendation; their purpose is to keep label, weigh-up and certificate aligned. As activity rises, the mass per dose falls, and uniform mixing becomes the limiting issue; a diluted or granulated grade may suit the line better than a more concentrated one. ## What to write into the purchase specification - “Chymotrypsin (CAS 9004-07-3, EC 3.4.21.1), with source and tissue declared.” - “Activity ≥1,000 USP U/mg by the ATEE assay at 237 nm, pH 7.0, 25 °C; basis stated.” - “Trypsin limit as a ratio to the chymotrypsin activity, measured on the same lot.” - “Identification by ATEE activity and infrared spectrum; protein and specific activity where agreed.” - “Moisture ≤5.0% loss on drying; ≥95% through 40 mesh; metals and microbiology per the table.” - “Any carrier identified; no other enzyme unless declared; source and TSE statement supplied.” - “The pack, and the storage condition that goes with it, written into the quotation.” ## When the catalog grade is the wrong choice When the label declares two enzymes, purchase the blend and require an assay for each; a chymotrypsin certificate says nothing about added trypsin. A customer who needs a non-animal source is not served by a pancreas extract, however high its activity. If the line cannot weigh the dose accurately, a dilution with a declared carrier is the practical answer. A liquid held for days is a process problem, not a grade problem: the enzyme attacks itself in water, and no powder choice prevents that. The catalog entry sits on the chymotrypsin product page, and the two-enzyme question is taken further on the chymotrypsin versus trypsin page. The companion enzyme is described on the trypsin product page, the three-enzyme standard on the pancreatin page, the release lines on the COA page, and the assay vocabulary in the methods section. ### 02.1 Chymotrypsin vs trypsin: two serine proteases, two units URL: https://nutrition.rainwoodbio.com/products/enzymes/chymotrypsin/grades/chymotrypsin-vs-trypsin/ Reviewed: 2026-11-19 Chymotrypsin and trypsin are both pancreatic serine proteases, and both are sold in units defined by USP methods. The shared name is the trap: the chymotrypsin unit is measured with ATEE at 237 nm, the trypsin unit with BAEE at 253 nm, and neither figure can be recalculated from the other. A product that names both enzymes needs two assays, two limits and two numbers on the label. In one lineTwo enzymes, two substrates, two wavelengths: the chymotrypsin number and the trypsin number are separate measurements, and no factor turns one into the other. ## The two definitions The table sets the two definitions side by side. What matters is not the size of the absorbance change on its own but the fact that the substrate, the wavelength and the assay pH all differ, so the two rates are not on a shared scale. How the chymotrypsin and trypsin units are defined | Enzyme | EC number | Substrate | Reading | Assay conditions | Unit definition | Chymotrypsin | 3.4.21.1 | ATEE | 237 nm | pH 7.0, 25 °C | Absorbance change of 0.0075 per minute | Trypsin | 3.4.21.4 | BAEE | 253 nm | pH 7.6, 25 °C | Absorbance rise of 0.003 per minute The chymotrypsin unit is the larger absorbance change of the two, and someone will eventually suggest dividing one number by the other. The suggestion fails because the two products absorb differently at their own wavelengths. A conversion would need a common substrate and a common detection wavelength, and this pair has neither. ## What the method has to print A certificate for either enzyme is reproducible only when the reader can repeat the measurement. That means recording the substrate and how much was used, the buffer and its pH, the temperature, the path length, the reaction volume, the raw rate per minute, the weighed enzyme mass and the basis for that mass. A result printed without these is a number, not an assay. Both methods are kinetic, and both need the initial rate. A reading taken after the reaction has slowed reports less activity than the enzyme actually has, and the mistake is invisible unless the absorbance trace is examined. The chymotrypsin method reads at 237 nm and the trypsin method at 253 nm; a laboratory that reports one wavelength for both has run a single assay and renamed it. ## Where each enzyme cuts The two enzymes recognise different side chains. Chymotrypsin binds an aromatic side chain and cuts the peptide bond on its carboxyl side, so a hydrolysate made with it ends many peptides at tyrosine, tryptophan or phenylalanine; leucine and methionine are accepted, but more slowly. Trypsin binds a basic side chain and cuts after lysine or arginine. The catalytic machinery is shared; the binding pocket is what differs. That difference is a process decision, not a detail. Two hydrolysates made from the same protein with the two enzymes have different peptide lengths, different terminal residues and often different solubility or taste. A blend produces a third peptide population, not an average of the first two. ## Why the activities travel together Chymotrypsin is made as an inactive precursor, chymotrypsinogen, which trypsin activates by cutting one bond. The two enzymes therefore start in the same tissue and remain together until a separation step removes one. That is why a chymotrypsin specification carries a trypsin limit and a trypsin specification carries a chymotrypsin limit: each certificate has to state how much of the other enzyme survived. The purification target is not the same in both directions. A chymotrypsin lot is judged on a low trypsin figure; a trypsin lot is judged on a low chymotrypsin figure. Two powders can both be called purified while one carries the companion activity that the other was meant to remove. ## Ratios are made of units, not grams A combination product is normally described by the ratio of activities, for example equal chymotrypsin and trypsin units. That ratio is not a mass ratio. Suppose the chymotrypsin is 1,000 USP U/mg and the trypsin is 250 USP U/mg: one milligram of the first supplies 1,000 chymotrypsin units, while four milligrams of the second supply 1,000 trypsin units. An equal-unit blend is therefore one part chymotrypsin to four parts trypsin by weight. Writing “equal parts” fixes the weights, not the activities, so the assay may find a ratio nobody intended. The certificate should state the activity of each enzyme, the ratio of those activities and the units in which the ratio is expressed. ## Naming both enzymes When both enzymes are ingredients, both belong on the panel and in the specification, each with its own activity. The word “protease” is not a substitute: it hides which enzyme was added and makes the two assays unverifiable. The species and tissue behind a pancreatic preparation belong in the specification as well. A trypsin figure can also appear in a chymotrypsin file as a purity limit. That is not the same as a second ingredient, and the label should distinguish the two: a limit records what was removed, an ingredient records what was added. A carrier introduced by dilution or granulation is a third material and has to be declared too. ## Choosing the right enzyme Begin with the bond that has to be broken. Aromatic side chains point to chymotrypsin, basic side chains to trypsin. If both are needed, purchase the combination and require a separate assay and limit for each enzyme, rather than accepting a single-enzyme powder with an unstated companion. If the goal is general proteolysis, neither pancreatic enzyme is necessarily right: neutral and alkaline proteases have their own pH ranges and their own units. The catalog entry is on the chymotrypsin product page; the grades page sets out the powder choices, the identity page shows the supporting tests, and the COA page covers the release lines. The companion enzyme is on the trypsin product page, the three-enzyme standard on the pancreatin page, the assay vocabulary in the methods section, and the quality page describes release. ### 03 Chymotrypsin stability: autolysis, moisture and the pack URL: https://nutrition.rainwoodbio.com/products/enzymes/chymotrypsin/stability/ Reviewed: 2026-11-19 Chymotrypsin is stable as a dry powder and unstable once water is added, because the enzyme's own peptide bonds become part of its substrate. Self-digestion runs fastest near pH 8, where the enzyme is also most active, and heat accelerates it. The retest period therefore belongs to a pack and a storage condition, not to the substance in general. In one lineWater is the switch: keep chymotrypsin dry and it holds its activity; dissolve it and the enzyme begins consuming itself. ## A dry powder is a paused enzyme Below a critical water activity the protein is immobile enough that self-digestion almost stops, and the powder holds its activity for months. The catalog limit of ≤5.0% loss on drying is a release gate, not a guarantee for the next two years: powder released at 4.8% can cross 6% in a damp store while the certificate still says 4.8%. Water activity is the more direct predictor, because it measures the water available to the enzyme rather than the total driven off in an oven. The pack has to keep that water out. A 1 kg foil pouch is the barrier for small quantities; a 25 kg fiber drum depends on its inner liner. Reclose both between weighings, keep a desiccant where the pack design allows one, and let a cold pack reach room temperature before opening it, so that condensation does not form on the powder. A humid weigh room or a pouch left open overnight can undo months of good storage. Heat is the second influence. A sealed powder tolerates ordinary warehouse temperatures, but a loading bay in summer or a drum against a heater is not ordinary. Steam is worse than dry heat because it delivers water and energy at the same time, and light matters less for the solid than for a solution, though the foil already excludes it. ## In water the enzyme is the substrate Once dissolved, chymotrypsin has access to its own chain, and the rate of self-digestion rises with pH towards 8. A solution held near the activity optimum is therefore also held near its fastest degradation. The clear solution that the powder forms says something about solubility, not about how long it will keep. Chymotrypsin is more durable on the acid side of its pH range, which is why a stock is often kept acidic and diluted only at the point of use. Calcium stabilises the folded protein and slows the loss; EDTA and citrate remove the calcium and accelerate it. Agitation creates foam, and protein at a foam interface unfolds; a dilute solution can also lose protein to filters and container walls. Repeated freezing and thawing adds another route to loss. When a liquid hold cannot be avoided, keep it short, keep it cold, and assay the solution after the hold instead of carrying the powder figure forward. A filtered, warmed and stored solution is a different test material from one made minutes earlier. ## What drives the loss Variables that change chymotrypsin during storage, and the practical control | Variable | What it changes | Practical control | Free water | Turns on self-digestion and causes caking | Sealed pouch, intact liner, desiccant, dry weighing area | Temperature | Raises the rate of self-digestion and unfolding | Store at 25 °C or below, away from heat; cool any process step | pH | Moves the enzyme towards its activity optimum and its fastest autolysis | Measure and record the hold pH; prefer the acid side | Calcium | Stabilises the folded enzyme; removing it speeds loss | Add calcium where the process allows; check chelators in the mix | Shear and foam | Unfolds protein at the air-liquid interface | Gentle mixing; avoid foaming; keep the hold volume small | Microbial growth | A wet powder or a solution can support growth | Micro release limits; closed pack; validated preservation for liquids No row acts alone. A warm, damp store combines water and heat, and a warm solution at pH 8 combines the pH effect with both. The question worth asking is therefore not whether the powder is stable in general, but which pack and matrix hold it within specification for the period claimed. ## Design the study around the pack you sell Stability data are only useful for the pack and condition they describe. A typical file runs a long-term arm at 25 °C/60% relative humidity, an intermediate arm at 30 °C/65%, an accelerated arm at 40 °C/75%, and a refrigerated arm at 2–8 °C when the product label requires cold storage. Pull samples at 0, 3, 6, 9, 12 and 24 months. At each point measure activity by the ATEE method, the trypsin ratio, loss on drying, appearance and microbiology. For a liquid or a hydrolysate process, add a separate arm at the process pH and temperature, with the real hold times, and assay before and after each hold. Report the individual values and identify the pack and the lot family; a summary that says only “within specification” cannot support a retest period. ## The matrix can be harsher than the pack A capsule or tablet keeps water activity low, but the shell and the excipients can still move moisture into the fill. Check loss on drying at release and again after storage, and look at the fill itself: a soft or mottled capsule is a warning that the assay may confirm later. Dry granulation is gentler than a wet step. A powder blend adds its own risks. A hygroscopic carrier raises the water activity of the whole mix, an alkaline excipient can lift the local pH towards the autolysis range, and a chelating ingredient can strip the calcium. A blend that contains a second protease needs an assay that distinguishes the two activities, because a general protease method reads the mixture. Liquids are the hardest case: water, a pH to control and usually a heat step. If the product is a liquid, the shelf life has to be generated in that liquid, with the process hold included. An overage is a label decision and does not repair a process that loses activity. ## The number belongs to a pack There is no single shelf life for chymotrypsin. The retest period on the specification is supported by data for one pack, one storage condition and one test panel, and it does not transfer to a repacked container or another matrix. A release activity and an end-of-period activity are two separate commitments, and both should be visible. Beyond the retest period, extension requires a fresh assay of the retained sample. Do not extend by default, and do not apply a bulk figure to a pack filled elsewhere. The catalog entry sits on the chymotrypsin product page; the COA page sets out the release tests, the MOQ page covers packs and arrival storage, the methods section explains the assay terms, and the quality page describes how release is handled. ### 04 Chymotrypsin MOQ, packs and the order that follows URL: https://nutrition.rainwoodbio.com/products/enzymes/chymotrypsin/moq/ Reviewed: 2026-11-19 The smallest chymotrypsin order is 1 kg, packed in a foil pouch; the 25 kg fiber drum is the production format, and the standard lead time is 1–7 days. A quotation only becomes firm once six details are known: the source, the activity and its method, the trypsin limit, the pack and quantity, the destination and Incoterm, and the paperwork, together with where the finished product will be sold. In one lineOne kilogram is the smallest unit we can release as a lot: it can be assayed, retained and traced before a production order is placed. ## Why the minimum is 1 kg A kilogram is enough for a bench trial, a retained portion and an ATEE assay in the buyer's laboratory, and the method is sensitive enough that a trial consumes very little. The pack travels as a parcel, which suits a project that has not yet fixed its production plan, and it carries a lot code that ties the sample, the certificate and the trial result together. Smaller quantities are cut from a larger lot and repacked. That is a legitimate way to run a bench test, but it creates a second pack identity and a traceability gap, so it should be ordered and documented as a repack. At the other end, a drum lowers handling per kilogram and also fixes inventory against a retest period; buying more than the line will use in that period is a storage decision, not a saving. ## Packs and formats Standard chymotrypsin packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Foil barrier; reseal between weighings | Fiber drum | 25 kg | Production | Keep the liner sealed; copy the lot code inside | Granulated powder | On request | Flow and dust control | Sieve result and wetting time move | Diluted powder | On request | Fewer units per gram | Carrier and label both change At least 95% of the catalog grade passes through 40 mesh. Granulation or dilution is a new specification, not another way of packing the same powder, because it changes the particle-size result, the carrier statement and the units per gram. Raise the need for a coarser or freer-flowing material before the quotation, since the extra step also moves the dispatch date. ## Lead time and dispatch The standard grade is dispatched 1–7 days after the order and the specification are confirmed. The window covers picking, document preparation and handover to the carrier; transit, customs clearance and the buyer's own quality release sit outside it. A granulation or a dilution needs its own lead time. Ask for a dispatch date, not only a number of days. Certificates and source statements should be in the same shipment as the powder, because a lot that arrives without its paperwork waits in quarantine. The Incoterm names who books the freight and who clears the entry, and it should cover the documents as well as the drum. ## What a quotation needs Six points separate a comparable offer from a vague one: - Product and source. Chymotrypsin, CAS 9004-07-3, with the tissue and species named. - Activity. USP units per milligram by ATEE at 237 nm, pH 7.0, 25 °C, and the basis of the figure. - Companion activity. The ratio written into the specification, and the figure reported on the certificate. - Pack and quantity. The 1 kg pouch or 25 kg drum, unless a granulated or diluted grade is needed. - Route. Destination country, delivery point and Incoterm. - Paperwork and use. Documents required and the market where the finished product will be sold. The quotation holds the commercial terms; the technical case is on this page. An offer that omits the source or the trypsin limit cannot be compared with one that includes them. ## A sample must be traceable to a lot Qualification starts with the 1 kg pack itself. Run the ATEE assay by the method on the specification, retain a portion, and set the result beside the certificate supplied with the pack. Sample, COA and quotation should carry the same lot code; if they do not, the exercise is a demonstration rather than a qualification. A bench quantity below 1 kg is a repack and should be labelled as one. It may not come from the same lot as the drum that follows, and a supplier should not be qualified on a sample drawn from a different grade. ## What to fix before ordering Commercial terms, delivery terms, pack size and dispatch window all live on the quotation. The quality terms belong next to them: the specification revision, a certificate for each lot, the retained sample, the retest period and the change-control route. Settling these before the first production order is cheaper than settling them after a dispute. Returns and replacements are governed by the quotation and the quality agreement. If a lot fails the agreed specification, resolve it through the retained sample and a joint re-test at a laboratory acceptable to both sides, not through a photograph. Agree the storage condition on arrival too: dry, cool, closed, with the opening date written on the pack. Start with the chymotrypsin product page for the catalog entry. Release tests are on the COA page, storage and pack behaviour on the stability page, and source documents on the compliance page; the glossary entry defines MOQ, and the quality page describes release. ### 05 The regulatory file for chymotrypsin URL: https://nutrition.rainwoodbio.com/products/enzymes/chymotrypsin/compliance/ Reviewed: 2026-11-19 Chymotrypsin is an enzyme preparation, so the regulatory file has three anchors: where the material comes from, what the specification measures, and where the finished product will be sold. Origin shapes the species and TSE documents, the specification shapes the activity method and contaminant panel, and the destination shapes the route and label. The buyer's regulatory team confirms the route; this page maps the frameworks and the documents. In one lineA chymotrypsin file is only as good as its source record and its method, and the destination market decides which route and label apply. ## What the file contains A file that can be reviewed answers four practical things. It names the material and the specification revision; it carries the certificate for the lot on the dock; it shows the limits and label rules that the destination applies to the finished product; and it records what happens when the source, the carrier or the particle size changes. The certificate covers the lot, the technical data sheet covers the specification and the safety data sheet covers handling. None of them answers the route question. For an enzyme like this, three statements carry more weight than the rest: the species and tissue of origin, the TSE position when the material is pancreas-derived, and the identity of the carrier. A lactose carrier brings a milk allergen with it, so the allergen statement should name the carrier and not only the enzyme. If the material is fermentation-derived, the production organism and its construction replace the TSE question, and the file needs a different set of documents. ## European Union In the EU, Regulation (EC) No 1332/2008 is the food-enzyme framework, and it requires a food enzyme to be on the Union list before it can be placed on the market, whether it acts as an ingredient or as a processing aid. The list is still being completed; EFSA has published safety evaluations for chymotrypsin preparations, including one produced by a genetically modified Bacillus licheniformis strain. The buyer's regulatory team checks the current list and confirms that the preparation and the use are covered, as of this review. Alongside it, Regulation (EC) No 999/2001 sets the TSE rules for animal material. Pancreas is not classified as specified risk material, but the regulation still asks for the species, the tissue and the country of origin, and those belong in the file. Regulation (EU) No 1169/2011 then decides whether the enzyme appears on the label: a processing aid that leaves no technological function in the finished food need not be declared, whereas an enzyme that stays in a supplement as an ingredient must be. Supplement labelling also depends on the member state. ## United States The US route depends on what the ingredient is doing. A food enzyme usually rests on a GRAS basis, which can come from a listing in 21 CFR Part 184, from a GRAS notice reviewed under 21 CFR Part 170, or from a self-affirmed conclusion supported by the supplier's evidence. A dietary supplement needs the dietary-ingredient framework, and a new dietary ingredient question looks at the marketing history before 15 October 1994. The buyer's regulatory team decides which basis applies to the finished product. The panel, the other ingredients and the claim are reviewed separately. An activity figure on a certificate is not a permission, and a permitted ingredient does not turn an activity figure into a claim. ## Contaminants and limits The catalog limits apply to the powder as released. The file also needs the calculation at the daily dose, since a result that looks comfortable per kilogram can be close to the limit in a capsule. The table lists the panel and what the finished-product file should show. Catalog limits and the finished-product calculation | Parameter | Catalog limit | What the file should show | Lead (Pb) | ≤3 mg/kg | The lot figure, the method and the intake calculation | Arsenic (As) | ≤2 mg/kg | The lot figure and the destination limit | Cadmium (Cd) | ≤1 mg/kg | The lot figure and any category exception | Mercury (Hg) | ≤0.1 mg/kg | The lot figure and the method | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Counts, absence statements and the methods used | Loss on drying | ≤5.0% | The measured value, because water lowers activity per gram ## Claims and the label No disease-related claim belongs on a chymotrypsin product, and enzyme activity is not a clinical effect. Any structure or function sentence is checked by the brand's reviewer against the market, the dosage form and the finished product; that check is independent of the certificate. A certificate describes a lot, not a label. Two habits cause trouble. The first is to describe the enzyme by the protein it breaks down, which turns a technical property into a physiological claim. The second is to print “protease” on the panel when the specification names chymotrypsin, which loses the identity the rest of the file establishes. Use the enzyme name and the source, and leave the wording to the reviewer. Great Britain and Northern Ireland follow separate routes. The GB file is checked against the GB register and GB labelling rules; Northern Ireland stays inside the EU framework. The buyer keeps the evidence for whichever route the destination requires. ## Documents in the file Documents to request with the first lot | Document | What it establishes | Ask for it when | Specification | Revision, activity, method and limits | Before accepting the quotation | COA | Results for the lot that ships | With every lot | Technical data sheet | Form, solubility, storage and packaging | During supplier qualification | Safety data sheet | Dust, sensitisation and safe handling | Qualification and warehouse use | Source and TSE statement | Species, tissue, country and TSE position | Before the first shipment | Allergen and carrier statement | Carrier identity and allergen risk | Before the label is designed | GMO and origin statement | Production organism and manufacturing site | At qualification | Residual solvent statement | Solvents used in purification | Where the market requires it ## Checklist before the first order - The specification identifies the enzyme, its source, CAS 9004-07-3 and the ATEE method. - Versioned copies of the COA, TDS and SDS are in the file. - Source, TSE position and carrier are all confirmed in writing. - The metals results have been recalculated for the daily dose. - A destination review covers both the label text and the claim. - Change control extends to source, carrier and particle size. The catalog entry is on the chymotrypsin product page; the COA page explains the lot certificate, the identity page covers the analytical evidence, while the EU and US regulatory notes give the framework references. Release handling is described on the quality page. ### 06 Proving a chymotrypsin lot: ATEE rate, protein and trypsin limit URL: https://nutrition.rainwoodbio.com/products/enzymes/chymotrypsin/identity/ Reviewed: 2026-11-19 A chymotrypsin lot is the named enzyme when five separate checks point the same way: the paperwork names the protein and its source, the ATEE assay gives a rate in the expected range, gel electrophoresis shows a band near 25 kDa, the trypsin figure stays inside its limit, and protein, moisture and activity add up to a coherent mass balance. No single figure proves identity; the activity alone would also fit a pancreas fraction or a partly inactivated preparation. In one lineThe proof of identity is the pattern formed by several measurements, not the activity number that a certificate prints first. ## The identity layers A supplier can put the right name on a drum and still ship a different protein. The layers below separate what is claimed from what is measured. Five layers of chymotrypsin identity | Layer | Question | Test | What it proves | Paperwork | Does the label name the enzyme and its source? | Name, CAS 9004-07-3, species and tissue | That a document exists | Rate | Does the powder hydrolyse ATEE? | ATEE assay at 237 nm, pH 7.0, 25 °C | A chymotrypsin-type protease | Size | Is the protein close to 25 kDa? | Electrophoresis under reducing conditions | A protein of the expected size | Companion | How much trypsin is present? | BAEE assay at 253 nm | How clean the separation was | Balance | Is the activity diluted or partly lost? | Protein, moisture, specific activity | Whether the numbers fit together ## The two ratios that matter Two ratios expose what the activity figure hides. The first is trypsin activity divided by chymotrypsin activity; the two enzymes are separated from the same gland, and a high ratio means the separation stopped early, while a very low ratio means the trypsin was removed deliberately. Neither case is visible in the chymotrypsin figure itself. The second is units per milligram of protein. If the protein is high but the activity is ordinary, part of the powder is inactive: unactivated chymotrypsinogen, denatured enzyme, or a foreign protein. If the protein is low and the activity is ordinary, the preparation is relatively pure. Chymotrypsinogen deserves a separate look because it is the precursor, it has a similar molecular weight, and it contributes protein without contributing ATEE activity; an incomplete activation step is therefore a protein-to-activity problem, not an activity problem. Taken together, the ratios diagnose the process. A high trypsin ratio points to the separation. A low specific activity points to activation, drying or storage. A shift across several lots is more informative than any one certificate. ## X-ray diffraction is a weak tool here Chymotrypsin is an amorphous solid, so a diffraction pattern is a diffuse band rather than a series of sharp lines, and it cannot establish that the protein is chymotrypsin. A certificate that presents “XRD conforms” as identity evidence for this product has used a method that cannot answer the question. Diffraction is still useful for one thing: crystalline carriers. Lactose monohydrate, dextrose and sodium chloride produce sharp reflections, so a powder that has been extended with one of them can show a pattern even when its activity per gram has been adjusted to look normal. Ask for the reference pattern and the detection limit before accepting a match; a sharp pattern in a material sold as carrier-free deserves an explanation. The catalog identity test is the ATEE assay together with infrared spectroscopy, and the infrared comparison is a similarity check on the amide bands, not a sequence determination. For a disputed lot, peptide mass fingerprinting or N-terminal sequencing gives the sequence-level answer that infrared and diffraction cannot. The methods section explains what each technique proves and what it leaves open. ## What substitution looks like How a chymotrypsin substitution shows up | Substitution | What it does | Signal | Test | Pancreas fraction rich in trypsin | Companion activity rises | Trypsin ratio above the limit | BAEE assay on the same lot | Different protease | General protease method is positive | Wrong band size; different substrate pattern | Electrophoresis and a substrate panel | Crystalline carrier | Activity per gram falls | Sharp diffraction; high ash | Diffraction, ash, moisture | Heat or autolysis damage | Protein remains, activity falls | Low specific activity; fragment ladder on the gel | Protein and ATEE assay | Chymotrypsinogen | Protein present, no activity | Normal protein with low activity | Specific activity and activation check | Undeclared source | Paperwork does not match the material | Inconsistent source statement | Documents; species-specific test where needed The fragment ladder is worth understanding. Active chymotrypsin that has been held warm or alkaline cuts itself and other protein chains, so a gel shows the main band plus smaller fragments. A powder can pass a protein assay and still fail an activity specification for that reason. ## What to write into the specification - “Chymotrypsin, source and tissue named, CAS 9004-07-3, EC 3.4.21.1.” - “Activity ≥1,000 USP U/mg by ATEE at 237 nm, pH 7.0, 25 °C, with the basis stated.” - “Identity by ATEE activity plus infrared comparison to a reference.” - “Trypsin limited as a ratio to the chymotrypsin activity on the same lot.” - “Protein and specific activity reported where agreed, method named.” - “Loss on drying ≤5.0%; carrier declared; no second enzyme unless named.” - “Source and TSE statement with every lot.” ## Questions to put in writing - What species and tissue does this lot come from, and which certificate line records it? - What are the chymotrypsin and trypsin figures for this lot, and in which units? - Will you send the protein value, the specific activity and the gel image? - How do you show that the chymotrypsinogen was fully activated? - If we disagree on the result, will you share the retained sample and repeat the method? Those five answers, in writing, are the identity file. The catalog entry is on the chymotrypsin product page; the COA page shows where each figure sits, the grades page contrasts the powder with a blend, the chymotrypsin versus trypsin page takes the two-enzyme question further, the companion enzyme is described on the trypsin product page, and the quality page describes release. ### 01 What the COA for lumbrokinase actually contains URL: https://nutrition.rainwoodbio.com/products/enzymes/lumbrokinase/coa/ Reviewed: 2026-11-19 A lumbrokinase COA earns its place when the activity result can be reproduced. The catalogue limit is ≥20,000 U/g on a fibrin plate, alongside appearance, identification, protein, moisture, metals, microbiology and particle size. A lot certificate records what was measured on one pack; it does not make the catalogue limit a batch result, and it cannot define the unit without the method. In one lineA lumbrokinase activity figure is a lysis-zone result on a named fibrin plate, so the unit definition, the standard and the moisture basis belong beside the number. ## Reading the certificate line by line One line carries most of the commercial value, and several others decide whether the pack can be released. Activity is what the buyer is paying for; identification asks whether that activity belongs to the named preparation; moisture, metals and microbiology ask whether the powder is fit to use. A limit without a method is only half a line, because “conforms” is a conclusion and the buyer needs the measurement underneath it. Release tests for lumbrokinase powder | Test | Method | Limit | Why it is on the sheet | Appearance | Visual | White to off-white, free-flowing powder | Quick check on colour and physical form | Identification | Fibrin-plate activity and protein pattern | Conforms to the reference | Ties the activity to the preparation | Activity | Fibrin plate with the standard and conditions named | ≥20,000 U/g | The commercial measurement | Protein content | Colorimetric or Kjeldahl | Reported, with the method | Basis for specific activity | Loss on drying | Gravimetric | ≤5.0% | Moisture basis for the as-is result | Heavy metals | ICP-MS | Pb ≤3 mg/kg; As ≤2 mg/kg; Cd ≤1 mg/kg; Hg ≤0.1 mg/kg | Contaminant release | Microbiology | Plate count plus absence tests | Yeast and mould ≤100 cfu/g; APC ≤1,000 cfu/g; E. coli and Salmonella absent | Hygiene of the lot | Particle size | Sieve analysis | ≥95% through 40 mesh | Flow and blend behaviour Identification is the line buyers tend to over-read. A fibrin plate can respond to other proteases that digest fibrin, so the activity result describes a reaction rather than a source. The protein pattern supplies the second dimension: an SDS-PAGE gel of a lumbrokinase preparation usually shows several bands, and the pattern is compared with a reference rather than read as a purity percentage. The identity page sets out the records that separate the preparation from a blend. ## How the U/g result is defined A unit per gram measures a rate, not a concentration. In the usual plate format, fibrinogen is turned into fibrin in an agarose layer, a dilution of the powder is added to a well, the plate is incubated, and the cleared zone is measured against a standard. The plate, the fibrin source, the standard, the incubation time, the temperature and the reading rule are all part of the definition. That is why two sheets can both show “20,000 U/g” and describe different amounts of activity. One may read the zone against a urokinase reference; another may use a house standard or a lysis-area rule. The method sheet has to say which, and the result has to be traceable to the standard used on that day. Results are quoted against the gram of powder as sold, not against the gram of protein and not against the gram of dry solids. A powder that takes up moisture carries fewer units in each gram at unchanged dry matter, so the loss on drying belongs beside the activity. If a sheet converts to a dry basis, it should show the moisture figure used for the conversion. Protein content completes the picture: units divided by protein gives specific activity, a ratio that is more stable across lots than either number alone. ## Release limit versus batch result A limit is a gate; a result is a measurement. Both belong on the certificate, in separate columns, with the method beside them. A result column that repeats the specification range has copied the gate instead of showing that the lot passed it. What a batch result should look like | Line | Gate | What the result should show | Activity | ≥20,000 U/g | A measured figure with plate, standard and conditions | Identification | Conforms | The activity result and the protein pattern behind it | Loss on drying | ≤5.0% | A measured percentage | Heavy metals | Per element | One measured value per element, in mg/kg | Microbiology | Counts and absence | Plate count plus absence confirmation | Particle size | ≥95% through 40 mesh | Sieve pass, reported as a percentage For this product the activity line is the one that can fail on its own. The contaminants are release gates, but the enzyme is the product. A certificate that gives the activity without the standard and conditions has supplied a number that cannot be reproduced or compared with another supplier's number. ## What moves between lots The raw material is earthworm tissue, so the starting point is biological rather than a fermentation tank. Species, tissue, origin and the feed or culture record shape the protein profile; extraction, purification, drying and blending shape the activity and the moisture. A final standardisation step may blend lots to a declared activity, which makes homogeneity and sampling part of the release decision. Colour is the least quantitative line and a weak signal. White to off-white covers a range, and a slightly darker powder can still meet every chemical limit. A falling activity, a rising loss on drying, a changed protein pattern or an extra gel band are stronger signals. The trend across lots matters more than one result near an edge. The code on the certificate has to appear on the pouch, the drum and the retention sample. Without that match, the paperwork and the goods are two separate stories. ## When an outside test is warranted Call for an independent test when the source is new, when a lot enters a regulated market for the first time, when a blend is suspected, or when a result is disputed. The useful panel is targeted rather than a full repeat: fibrin-plate activity with the method sheet, protein content, SDS-PAGE, loss on drying, the heavy-metal panel and microbiology. DNA barcoding of a retention sample can help confirm the earthworm species where the source record is thin. Ask the laboratory to state its detection limit and recovery for each screen. A “not detected” line without a limit describes the method, not the powder. The sample tested should be the one retained, and the report should carry the lot code. ## What to compare between suppliers Six lines make a useful comparison: species and source record; activity with the plate, standard and conditions; protein content and specific activity; loss on drying; contaminants and microbiology; pack format and lot identity. Two quotations that agree on the number but differ on the standard are not offering the same material. The certificate should name who manufactured the lot, which species and tissue were used, and which drying and milling steps produced the 40 mesh powder. The catalogue values are on the lumbrokinase product page. The assay framework is described on the analytical methods page, the release workflow is on the quality page, and the grade options are on the grades page. ### 02 Lumbrokinase grades: activity, carrier and particle form URL: https://nutrition.rainwoodbio.com/products/enzymes/lumbrokinase/grades/ Reviewed: 2026-11-19 The catalogue offers one activity grade — a 40 mesh powder at ≥20,000 U/g — plus a granulated version on request. The choice that matters is therefore not “which purity” but which activity, which carrier and which particle form the formula can tolerate. A switch changes the weighed mass, the label and the dust in the room. In one lineA lumbrokinase grade is an activity plus the material that carries it, so the unit, the protein content and the particle form have to be read together. ## A preparation is not described by a percentage Purity works for a single molecule. Lumbrokinase is a protein mixture extracted from earthworm tissue, and the powder also contains the other soluble proteins from that tissue and any carrier used to bring the activity to a declared figure. Calling the powder “98%” would say almost nothing about how many units it carries or what those units sit on. The practical description is a set of four facts: activity, protein content, carrier and particle form, with the source species behind them. Two suppliers can use the same product name and differ on every one of those facts. The buyer's job is to compare the facts, not the name — the COA page shows where each one appears on the certificate. What a lumbrokinase grade decision sets | Decision | What it fixes | Where it appears | Activity | Units delivered per gram | Dose weight, label, overage | Protein content | Protein load behind the activity | Specific activity, blend behaviour | Carrier | What the activity is spread on | Ingredient list, moisture, flow | Mesh | Flow, dispersion and dust | Mixing time, uniformity, air quality | Physical form | Powder or granule | Wetting rate, dust control | Species | Which earthworm material was extracted | Identity file, regulatory dossier ## The catalogue options The standard powder is the reference grade: ≥20,000 U/g, milled to pass 40 mesh, with the carrier stated in the specification. The granulated version is made to order, and a different activity is a new specification rather than a packing variant. Each option has a different effect on the formula, and each needs its own release result. Lumbrokinase grade options | Option | Activity | Form | Effect on the formula | Catalogue powder | ≥20,000 U/g | ≥95% through 40 mesh | Lowest catalogue dose weight; suited to dry blends | Granulated | Agreed in the specification | Granules | Less dust; slower wetting; activity after granulation | Other activity | Agreed in the specification | Powder or granules | New dose weight, certificate and label basis Activity figures are comparable only when the method is. A U/g read against one plate standard and a U/g read against another are different measurements, and the difference does not disappear because both sheets use the same letter. The same point applies across products: a nattokinase FU/g is a separate unit system, as the nattokinase specification shows. Neither number can be converted into the other without the method that defined it. ## Powder, mesh and air quality The 40 mesh powder flows well and disperses in water to a clear to slightly turbid solution. The fine fraction is what speeds dispersion and what puts protein into the air when the bag is opened. Enzyme powders are respiratory sensitisers, so the safety data sheet, local exhaust ventilation, closed transfer and a suitable mask are part of the grade decision, not an afterthought for the plant manager. Granulation reduces dust and slows wetting. A stick pack that must disperse quickly usually takes the powder; a facility that weighs enzyme every day may prefer granules for cleaner air. The granulation step can also reduce activity, so the granulated lot needs a release figure measured after that step. A granulated lot described only by the activity of its parent powder has no result of its own. ## The arithmetic behind the choice The mass required is the declared unit count divided by the activity. For a batch that needs 20,000 U, the weigh-up is 1.0 g of a 20,000 U/g powder, 0.5 g of a 40,000 U/g powder, or 2.0 g of a 10,000 U/g powder. The unit count is identical in all three; the powder mass, the carrier load and the label entry are not. Moving to a two-fold dilution doubles the weight and introduces one part of carrier for every part of enzyme powder. Weighing accuracy often decides the grade. A small charge is easy in a production batch and difficult in a pilot, where the balance and the mixer both struggle with a few milligrams. A dilution makes the charge weighable, but it carries the carrier into the formula and the ingredient list. The largest batch the formula will run is a better guide than the smallest. Two rules sit beside the arithmetic. The label has to state whether the declared activity is at release or at the end of the declared shelf life. And a diluted grade is a manufactured lot: its certificate should report the activity of that lot, not the activity of the concentrate behind it. The dosage form then sets the limit. A hard capsule, a stick pack and a tablet each allow a different fill, so fix the form before fixing the grade. ## Writing the grade into a specification - “Lumbrokinase preparation from earthworm, with the species and tissue named in the source record.” - “Activity ≥20,000 U/g by the fibrin-plate method, with plate, standard, incubation and reading rule on the COA.” - “Protein content and the method used; specific activity calculated from both.” - “Carrier and any additional enzyme activity declared; no undeclared diluent.” - “Loss on drying ≤5.0%; ≥95% through 40 mesh; metals and microbiology within the listed limits.” - “Label basis: activity at release or at the end of the declared shelf life.” Write the activity as a minimum, not a target, and keep the method beside it. State the carrier even when none is added; “none” is a declaration, and an unstated carrier is a common reason two quotations at the same activity behave differently. A specification that cannot be tested is not a specification, and a grade that cannot be described in these lines is not ready to quote. ## When another grade is the wrong choice Three objections surface against dilution. Adding maltodextrin cannot help a blend that is already at its carrier ceiling. A carrier that holds water is unwelcome in a formula with a tight moisture budget. And a short ingredient list does not need an entry whose only purpose is to make the powder heavy enough to weigh. There is also a scale argument: a dilution that solves a pilot weighing problem can become unnecessary once the production batch is big enough for the concentrate to be weighed accurately. Granulation has limits too. A product that must disperse in seconds, or an assay that needs a fully dissolved sample, is better served by the powder. The catalogue values are on the lumbrokinase product page; activity loss after granulation is covered on the stability page; the protein and activity checks are on the methods page and the release workflow is on the quality page. ### 02.1 Lumbrokinase vs nattokinase: two enzymes, two units URL: https://nutrition.rainwoodbio.com/products/enzymes/lumbrokinase/grades/lumbrokinase-vs-nattokinase/ Reviewed: 2026-11-19 Lumbrokinase and nattokinase are both described as fibrinolytic enzyme preparations, but they come from different sources and are measured on different assays. Lumbrokinase is an earthworm-derived mixture read on a fibrin plate in U/g; nattokinase is a fermentation protein from Bacillus subtilis natto read in FU/g. The two units are method-specific and do not convert into each other. In one lineLumbrokinase is sold in fibrin-plate units and nattokinase in FU, and neither unit converts into the other without the method that defined it. ## Two enzymes, two unit systems A unit is a defined amount of activity under a named method, not a mass of enzyme. Lumbrokinase activity is quoted in U/g, read from a lysis zone on a fibrin plate against a standard. Nattokinase activity is quoted in FU/g, a fibrin unit defined by a spectrophotometric reading of fibrin degradation under fixed conditions. The abbreviations are easy to confuse and the substrates overlap, but the measurements are different. The two activity units compared | Property | Lumbrokinase | Nattokinase | Catalog activity | ≥20,000 U/g | ≥20,000 FU/g | Unit basis | Lysis zone on a fibrin plate against a standard | A defined absorbance change during fibrin degradation | Result basis | Per gram of preparation as sold | Per gram of preparation as sold | Conversion to the other | None without the methods | None without the methods “U” is not a universal enzyme unit. A lumbrokinase U and a nattokinase FU are both defined by their assay sheets, and a third supplier may use a different standard under the same letter. Two certificates that both say 20,000 are comparable only when the plate, the substrate, the standard, the time, the temperature and the reading rule are the same. The methods page explains why a method is only useful when it names its limits. ## Fibrin plate against the spectrophotometer The lumbrokinase assay is usually run on a fibrin plate. Fibrinogen is converted to fibrin in an agarose layer, a dilution of the powder is placed in a well, the plate is incubated, and the cleared zone is measured and compared with a standard. The plate, the fibrin source, the standard, the incubation time and the reading rule define the unit. A plate assay is a comparison of zones, so it is sensitive to the reference and to the reading method. The nattokinase assay is commonly a spectrophotometric measurement of fibrin degradation, with the unit defined by a fixed absorbance change per minute at 275 nm. The result is still a rate, and it still depends on the substrate, the pH, the temperature and the detection step. The nattokinase specification can be read on the nattokinase product page. Assay differences that stop a direct comparison | Element | Lumbrokinase | Nattokinase | Format | Fibrin plate, zone measurement | Spectrophotometric fibrin degradation | Detection | Cleared zone against a standard | Absorbance change per minute | Definition | Standard and reading rule named on the sheet | Fixed absorbance change named on the sheet | Main variables | Plate, fibrin source, standard, incubation | Substrate, pH, temperature, detection Neither assay identifies the protein that produced the activity. A different protease can clear a fibrin plate or move an absorbance reading. That is why the protein pattern and the source record sit beside the activity in both files, and why the lumbrokinase identity page places the activity as one layer rather than the whole proof. ## Earthworm tissue against a fermentation Lumbrokinase is extracted from earthworm tissue, so its source record names a species, a tissue and an origin, and its batch variation starts with the raw material. Nattokinase is produced by fermentation with Bacillus subtilis natto, so its source record names a strain and a fermentation process, and soy is part of its allergen story. The difference is not a quality hierarchy; it is a difference in what the buyer has to audit. The animal origin changes the documentation. A lumbrokinase file should carry a species and tissue statement and an animal-origin questionnaire; a mammalian TSE questionnaire does not map neatly onto an invertebrate source, but the buyer's reviewer may still ask for it. The nattokinase file should carry the strain, the soy source and the allergen declaration. Each product's regulatory route is separate, and the destination review has to be done on the actual material rather than on the category “enzyme”. ## The catalog figures side by side Lumbrokinase and nattokinase at catalog specification | Parameter | Lumbrokinase | Nattokinase | CAS number | 556743-18-1 | 9014-01-1 | Source | Earthworm tissue | Bacillus subtilis natto fermentation | Activity | ≥20,000 U/g, fibrin plate | ≥20,000 FU/g, spectrophotometric | Appearance | White to off-white powder | Off-white to light tan powder | Loss on drying | ≤5.0% | ≤8.0% | pH (1% solution) | Not a catalog limit | 6.0–8.0 | Microbiology | APC ≤1,000 cfu/g | APC ≤10,000 cfu/g | Particle size | ≥95% through 40 mesh | ≥95% through 40 mesh The table compares specifications; it does not rank them. The two products carry different moisture and microbiology limits because they are different preparations, and a buyer who applies one product's limits to the other will reject conforming lots or accept non-conforming ones. ## The label and the unit The label should name the ingredient and the activity on a stated basis. “Lumbrokinase 20,000 U/g” and “nattokinase 20,000 FU/g” are not interchangeable declarations, and a blend that contains both needs each activity declared on its own basis. A combined “fibrinolytic enzyme blend” figure does not tell the buyer how much of either preparation is present. “Fibrinolytic” describes an in-vitro assay, not a benefit. Neither ingredient should be presented with a disease-related claim, and the label review belongs to the destination market. The wording rules are set out on the lumbrokinase compliance page; the nattokinase file has its own review. A certificate is not a claim approval, and no claim review moves the unit. ## When to choose which Choose lumbrokinase when the formula is built on an earthworm-derived preparation and the specification is written around a fibrin-plate unit. Choose nattokinase when the formula is built on a fermentation-derived enzyme and the specification is written around FU. The choice is a source and label decision first, and an activity comparison second, because the two numbers are not on the same scale. If the formula contains both, assay each one separately and declare each activity. A single fibrin-based assay can respond to both preparations, so a combined result cannot show that either one is present at its declared level. For a third option in the same category, the serratiopeptidase specification uses a casein unit, which is a third scale again. The catalog figures for this product are on the lumbrokinase product page; the grades page covers activity and particle form; the COA page shows how the unit is reported; the quality page describes the release workflow. ### 03 Lumbrokinase stability: activity, moisture and the pack URL: https://nutrition.rainwoodbio.com/products/enzymes/lumbrokinase/stability/ Reviewed: 2026-11-19 Lumbrokinase is a protein powder, and its shelf life is written in activity rather than in appearance. Heat and moisture drive the loss, the foil pack is the barrier that slows it, and a solution is the format where it goes fastest. The storage condition and the pack must be named before any shelf-life figure means anything. In one lineActivity is the shelf-life line for lumbrokinase, and the pack, the moisture and the storage temperature decide how fast it falls. ## The powder: moisture, heat and the barrier The ≤5.0% loss-on-drying limit belongs to release. It is not a reservoir of moisture that the powder can spend during storage. Once the pouch is open, the powder equilibrates with the room, the as-is activity falls because each gram now holds more water and less solids, and the protein itself becomes less stable in the damp. A dry store and a closed pack are part of the working specification even when the certificate says nothing about them. Heat acts on the same protein from a different direction. A sealed pack in a controlled store is not the same material as a pack that has spent a week in a hot loading bay or a glass-roofed warehouse. The loss is not linear with temperature, so a short excursion can remove more activity than a long spell at ambient. If a pack has been cold, let it reach room temperature before opening, or condensation will form on the powder. The pack is the barrier, and the seal is where it fails. A heat-sealed foil pouch protects against moisture and light; a pouch that has been torn open and folded closed is a different container, with humid air in the headspace. A long storage period calls for a smaller opaque container or for using the remainder inside the stated in-use window. The 25 kg drum depends on its liner, so keep the liner closed and keep the drum off a damp floor. ## The solution: where activity goes fastest In water, the protein meets water, oxygen, heat and microbes at once. Activity can fall faster in a few days of liquid storage than in months of sealed powder storage, and the change may not be visible. A ready-to-drink process adds a heat step through pasteurisation or hot fill; a stick pack escapes it, since water is added only when the product is used. If a liquid is required, the formulator has to control pH, dissolved oxygen, light exposure and the hold time before filling. Foaming matters too: an enzyme concentrates at the air–liquid interface, and a high-shear pump or an over-vigorous stir can denature protein there. The loss appears as a lower activity in the finished batch, not as a colour change. A powder stability study is not a beverage study; the finished drink needs its own shelf-life data. ## What moves the activity Storage and process factors for lumbrokinase | Factor | Effect on the preparation | Control | Heat | Unfolds protein and lowers activity | Controlled store; cool process | Moisture | Dilutes the as-is activity and destabilises the protein | Sealed barrier pack; desiccant if needed | pH | Moves the protein away from its stable range | Buffer and validate the matrix | Autolysis | The preparation digests its own protein over time | Low moisture, cool storage, specific-activity checks | Oxygen and light | Oxidation at the surface and in solution | Low headspace; opaque or foil pack | Metal contact | Binding and inactivation in solution | Avoid iron and copper parts | Shear | Denaturation at the air–liquid interface | Low-shear transfer; control foam These factors reinforce one another. A warm, damp store is worse than either condition alone, and a clear bottle of solution at the wrong pH combines several of them. The question to ask is never “is the powder stable?” in general; it is “stable in this pack, at this condition, for this long?” ## Designing the stability study The study is defined by four choices: the pack, the storage condition, the sampling times and the test panel. A warehouse arm at 25 °C/60% relative humidity, an intermediate arm at 30 °C/65% and an accelerated arm at 40 °C/75% cover the usual range. If the label will ask for a cool store, add a refrigerated arm; an accelerated result alone will not support a cold-chain statement. A light-exposure arm is needed because a dark incubator cannot see a photolytic failure. At every point, measure activity by the named fibrin plate, protein content, loss on drying, appearance and microbiology. Specific activity is the most useful derived figure: it tells a real activity loss apart from a powder that has simply picked up water. Report the individual numbers, not only a pass line, and identify the pack and the lot family. The study has to match the pack that will be sold; a 1 kg pouch and a 25 kg drum differ in headspace, in opening history and in the ratio of surface to volume. ## What the dosage form adds A capsule or tablet keeps water activity low, but the shell and the excipients can still pass moisture, and compression adds heat and shear. Check loss on drying and activity after tableting, not only on the powder. A stick pack lives or dies by its seal: a pinhole fails the pack, so inspect the strip as well as the powder. A liquid needs the work described above, in the matrix and at the process pH. Excipients are not neutral. A moisture-holding carrier, an acidic or alkaline component, or a metal-containing colour can each change the rate of loss. If another enzyme is present, measure each activity separately, because a fibrin-based assay can respond to more than one protein. An overage is a label and stability decision; it cannot rescue a pack that lets moisture through. ## How the retest period is assigned There is no single shelf-life number for lumbrokinase in the abstract. The assigned retest period belongs to a pack and a storage condition, and it is supported by the study for that combination. A figure quoted without the pack, the condition and the test panel is a claim, not a shelf life. When the retest period ends, test the retained sample again before extending use. Extension is a decision supported by a result, not by the calendar. A bulk figure also does not follow the material into a new container. The product hub lists the standard packs; release tests are on the COA page; pack and lead time are on the MOQ page; the assay framework is on the methods page; and the quality page describes the release workflow. ### 04 Lumbrokinase MOQ, packs and the first order URL: https://nutrition.rainwoodbio.com/products/enzymes/lumbrokinase/moq/ Reviewed: 2026-11-19 Lumbrokinase ships from a 1 kg minimum: one foil pouch, or a 25 kg fiber drum for production. Standard packs leave in 1–7 days. An enquiry becomes an order only when the activity, the pack, the destination, the documents and the intended market are all named in the quotation. In one lineOne kilogram is the minimum because that is the smallest pack that can be sampled, assayed and traced as a lot. ## Why the entry pack is 1 kg The pouch is large enough to do three jobs: run a bench trial, hold a retention sample, and supply an outside laboratory for an activity check. It is also small enough to move as a parcel, which helps when a formulator is waiting on material and the production plan is not fixed. Most importantly, it is a packed lot with a code, not a scoop taken from a drum. A request for a few hundred grams therefore asks for a repack, not a smaller catalogue item. Repacking adds a handling step, detaches the material from its original lot record and makes a later dispute harder to resolve. The drum is the other end of the range: it cuts handling per kilogram but locks up inventory and stretches the storage period. Neither pack exists to reward volume; each is a unit of traceability. ## Packs and formats Lumbrokinase packs and what each one is for | Pack | Net weight | Usual role | Practical note | Foil pouch | 1 kg | Trial, retention, small batch | Barrier pack; close it properly after use | Fiber drum | 25 kg | Production | Liner keeps moisture out; mark the opening date | Granulated | On request | Dust control and flow | Release the activity after granulation | Other activity | On request | Formula-specific unit weight | New specification, new certificate The catalogue powder is milled to ≥95% through 40 mesh. A granule, a coarser powder or a different activity is a different specification, not an alternative bag. Tell the supplier before the quote is written if the dosage form needs a particular flow, because the change can alter the activity result and the dispatch date. A granulated batch needs a release figure measured after the granulation, not the figure of the powder that went into it. ## Lead time and handover The clock starts when the order is confirmed. The 1–7 day window covers picking, the document set and handover to the carrier; transit, customs and the customer's own quality release sit outside it. A granulated batch, a different activity or a special pack takes longer, and that extra time should appear as a separate line on the quotation rather than as a surprise. A dispatch date is more useful than a lead time. The Incoterm then settles who books the freight and who clears the entry. For an animal-derived powder, the species and origin statement should travel in the same document pack as the certificate; answering an origin question before the shipment lands is much easier than answering it afterwards. ## What a quotation has to state A quotation that can be compared line for line contains six things: - Material and activity. Lumbrokinase preparation, CAS 556743-18-1, activity in U/g with the fibrin-plate method named. - Specification. Activity, protein, loss on drying, particle size, heavy metals and microbiology. - Pack and quantity. 1 kg pouch, 25 kg drum, or a granulated or other-activity variant. - Destination and Incoterm. Country, port or address, and the trade term. - Documents. COA, specification, SDS, source statement and any destination-specific declaration. - Use and market. Supplement, food or another use, and the market where the finished product will be sold. Leave out the market and the activity basis and the quotation describes a powder, not a purchase. Commercial terms are not published here; they belong on the quotation and in the quality agreement. ## Qualifying on the pack The 1 kg pouch is the qualification unit. Test activity with the named plate and standard, check protein and loss on drying, and run the microbiology panel before committing to a larger batch. Keep part of the same pack as the retention sample, and make sure the code on the pouch, the certificate and the quotation match. Activity deserves the most attention. Ask the laboratory to report the plate, the standard and the reading rule, and to put the protein result beside the activity. A sample that reaches 20,000 U/g but shows a protein pattern unlike the reference has passed one test and failed another. The identity page explains the checks that belong with the plate result. A bench quantity split from a bulk lot is a repack, not the 1 kg catalogue pack. If one is agreed, document it as a repack with its own code, and do not assume it came from the same lot as the later production drum. ## Terms to settle before the first production order Put the quality terms next to the commercial ones: the specification revision, the certificate for each lot, the retention sample, the retest period and the change-control route. Settling them at the start is easier than arguing about them after a rejected delivery. A failed lot should be handled through the retention sample and a joint re-test, not through a photograph. Agree in advance which laboratory can act as referee, who pays for that test, and which method it will use. For an activity dispute the method is the dispute: a referee plate run with a different standard will not settle anything. The product hub carries the catalogue specification; the COA page sets out the release tests; the compliance page covers the market file; the MOQ glossary entry explains the abbreviation; the logistics page covers freight and paperwork. ### 05 The regulatory file for lumbrokinase URL: https://nutrition.rainwoodbio.com/products/enzymes/lumbrokinase/compliance/ Reviewed: 2026-11-19 The regulatory file for lumbrokinase has to do more than carry an assay: it has to name the earthworm source, show the route the buyer intends to use, and line up the label with that route. This page sets out the documents and checks the buyer's regulatory team will ask for. It does not decide the route for a given market. In one lineThe specification describes the preparation; the regulatory file has to show the source, the route and the label for the destination. ## Four facts that anchor the file The file hangs on four facts: which specification revision is being bought, which lot is being released, which destination and finished product are intended, and what has changed since the last approval. The certificate belongs to the lot, the technical data sheet to the specification, and the safety data sheet to handling. The destination question is answered by the buyer's regulatory team, because it depends on the route and on the finished product, not on the powder alone. Source is the first difference between lumbrokinase and a mineral or a fermentation ingredient. The preparation comes from earthworm tissue, so the file should name the species, the tissue, the country of origin and the feed or culture record. A line that says only “animal-derived” does not identify a source. Allergen, GMO and residual-solvent statements belong beside it, along with any declaration the customer requires. Version control is part of the file. A dated list that ties the quotation, the specification and the certificate to the same revision is more useful than a folder of unnumbered PDFs. When a statement is missing for a lot, record the gap and close it before dispatch rather than after the shipment reaches the port. ## European Union In the EU, the review runs through several instruments at once. Food supplements sit under Directive 2002/46/EC, general food law under Regulation (EC) No 178/2002, labelling under Regulation (EU) No 1169/2011 and contaminants under Commission Regulation (EU) 2023/915. Health claims are a separate regime under Regulation (EC) No 1924/2006. The current consolidated text is the reference, not a summary. The route question is whether the preparation is a novel food. The test is the history of use as a food in the EU before 15 May 1997, not the word “enzyme” on the label. If that history cannot be shown, Regulation (EU) 2015/2283 applies and the buyer's regulatory team has to establish what evidence the reviewer will accept. This page does not assert that a route exists for any market. Great Britain keeps its own novel-food register and labelling rules, while Northern Ireland follows the EU framework, so the destination has to be checked market by market. ## United States In the US, the route depends on whether the material is sold as a dietary ingredient or as a food. A dietary ingredient marketed before 15 October 1994 sits under DSHEA; one that was not may need a new dietary ingredient notification under 21 CFR 190.6. A food use follows a different path, and a GRAS conclusion is a separate file with its own evidence. The buyer's regulatory team confirms which path applies and whether the evidence covers the finished product. The label is reviewed apart from the certificate. The Supplement Facts panel has to name the ingredient and the amount, and the claim review asks whether the wording is allowed for that ingredient in that product. A certificate is not a claim approval, and a claim review does not alter the specification. ## Contaminants and limits The contaminant calculation is done on the finished product, at the dose that will be consumed, not only on the drum. The table gives starting references for a supplement file; the destination's current text and the daily intake decide the operative limit. Contaminant and microbiology references for the finished product | Parameter | Starting reference | Evidence the file needs | Lead (Pb) | 3.0 mg/kg in the supplement | Measured result, method, limit and the intake calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | Measured result and any exception for the category | Mercury (Hg) | 0.10 mg/kg in the supplement | Measured result and the method used | Arsenic (As) | Customer or market limit | Agreed limit, method and measured value | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g | Lot count and absence statement for E. coli and Salmonella The US federal framework does not impose a single heavy-metal ceiling on supplements in the way the EU contaminant regulation does; the agreed specification and the applicable state rules carry more of the weight. That makes the specification the operative document and puts the method and detection limit inside the commercial agreement. ## Claims and the label No disease-related claim is made for this material, and the label review should begin there. The fibrin plate is a laboratory tool: it measures what the preparation does to a substrate in a dish, not what it does in a person. That measurement is not a health claim and must not be written as one. In the US, a structure/function statement has its own review and, where applicable, a notification and disclaimer; in the EU, a health claim needs authorisation and a place on the register. “Fibrinolytic” describes the assay, not a benefit. The ingredient name and the activity unit are label facts; the claim is a separate review. If the formula contains other enzymes, each activity needs its own declaration and its own basis, because a combined enzyme-blend figure does not show how much of either preparation is present. ## Documents to keep with the lot - Lot certificate with the fibrin-plate method, standard and measured activity. - Specification at the quoted revision, covering activity, protein, moisture, metals and microbiology. - Safety data sheet with the respiratory-sensitiser and dust statements. - Source record: earthworm species, tissue, origin, feed or culture, and the supplier declaration. - Allergen, GMO and residual-solvent statements, plus the animal-origin questionnaire. - Stability summary for the pack being bought and the assigned retest period. - Change-control procedure for source, process, carrier and pack. ## Checklist before the first order - The specification revision, CAS 556743-18-1 and the source species are named. - The activity method, standard and basis are written down, not only the U/g result. - Certificate, technical data sheet, safety data sheet and source statements are on file. - The contaminant results have been recalculated for the finished-product dose. - Label and claim wording has been reviewed for the destination market. - Source, process, carrier and pack are covered by change control. For the catalogue values, see the lumbrokinase hub. The COA page explains how the lot certificate is structured; the identity page sets out the supporting tests. The quality page describes the release file, and the EU regulatory note gives the framework references. ### 06 How a lumbrokinase lot is proved URL: https://nutrition.rainwoodbio.com/products/enzymes/lumbrokinase/identity/ Reviewed: 2026-11-19 Lumbrokinase is a mixture, so no single band, peak or activity number identifies it. A lot is accepted when four records line up: the earthworm species and tissue, the protein pattern, the fibrin-plate result and the trail from pack to certificate. Each record answers a different question. In one lineA lumbrokinase lot is proved when the source record, the protein pattern, the fibrin-plate activity and the lot trace agree, not by a single activity figure. ## Four records, not one test Paperwork can name the right material without proving that the powder in the drum is that material. The four records below are separate questions, and a supplier who answers only the first has described a label, not a lot. The four identity records for lumbrokinase | Record | Question it answers | Evidence | What it establishes | Origin | Which earthworm, which tissue? | Species and tissue declaration; DNA barcode where needed | The biological source | Protein | Does the band pattern match the reference? | SDS-PAGE against a reference preparation | The protein mixture, not one enzyme | Activity | Does it digest fibrin as declared? | Fibrin plate with the standard and conditions named | A rate under those conditions | Trace | Is this the pack that was tested? | Lot code on pack, certificate and retention sample | The link between result and goods Each record is weak on its own. Origin without activity describes an extract; activity without a protein pattern describes a reaction; a certificate without a lot code describes no particular container. The combination is what makes the identity file auditable. ## Specific activity and the substrate ratio Activity divided by protein gives specific activity, normally written as U per milligram of protein. For a fixed grade that figure should stay in a narrow band from lot to lot. If activity holds while the ratio falls, the protein load has grown without a matching gain in units: a carrier, a different cut during recovery, or a fraction that has lost activity. If the ratio rises, either the protein measurement is low or the activity standard has moved. Two ratios and the questions they open | Ratio | Calculation | What a shift suggests | Specific activity | U/g divided by protein content | A dilution, a recovery change or an inactive fraction | Substrate ratio | Fibrin-plate activity compared with a broad protease assay | A blend or a non-fibrin protease used to lift the plate result The substrate ratio is a screening comparison, not a fixed official constant. It becomes useful when the same two methods are applied to every lot and to the reference, so that a movement can be seen. If both individual results stay in range but the ratio moves, the protein pattern is the next test to run. Protein methods carry their own bias. Colorimetric assays respond differently to different proteins, and Kjeldahl measures nitrogen rather than protein. The ratio is comparable only when the protein method is held constant, and a certificate that reports protein without naming the method has given a figure that cannot enter the ratio. ## X-ray diffraction and the solid state X-ray diffraction describes the solid, not the enzyme. A protein preparation is largely amorphous, so an XRD pattern will not identify lumbrokinase in the way it identifies a crystalline mineral salt. What the method can show is whether a crystalline phase is present: a crystalline carrier, an inorganic diluent or a salt from standardisation can produce sharp reflections where the protein produces none. That makes XRD a check on the carrier and a poor identity test. A certificate that says “XRD conforms” without a reference pattern and a detection limit has said very little. Where the solid form is disputed, ask for the pattern, the reference and the interpretation, then read it alongside the protein pattern and the activity result. XRD is not a routine release test here. ## What substitution looks like Substitution routes and the checks that reveal them | Route | What can pass | Signal | Check | Dilution with carrier | A declared U/g if the blend is assayed | Heavier dose weight; specific activity flat or lower | Carrier declaration, mass balance, protein | Another protease | Fibrin-plate activity | Different band pattern; substrate ratio shifts | SDS-PAGE, comparison of substrates | Inactive powder | Protein content | Activity low; specific activity falls | Fibrin plate with protein | Wrong earthworm species | Activity and appearance | Source record gap; protein pattern differs | DNA barcoding, source audit | Overstated activity | A certificate figure | Independent result lower | Referee assay by the named method | Mislabelled lot | A certificate from another batch | Code mismatch | Pack, certificate and retention sample These are checks, not allegations. A buyer who stops at the activity result has used one of the four records. Colour is the weakest signal of all: white to off-white covers a wide range, and another powder can match it. The protein pattern, the specific activity and the source record are harder to imitate. ## Writing identity into the specification - “Lumbrokinase preparation from earthworm; species, tissue and origin stated in the source record.” - “Activity ≥20,000 U/g by the fibrin-plate method, with plate, standard, incubation and reading rule on the COA.” - “Protein content with the method named; specific activity calculated and reported.” - “SDS-PAGE pattern consistent with the reference; report the bands, not only a pass statement.” - “Carrier and any additional enzyme activity declared; no undeclared diluent.” - “Loss on drying ≤5.0%; particle size ≥95% through 40 mesh; metals and microbiology within the listed limits.” - “Lot code repeated on the pack, the certificate and the retention sample.” ## Five questions for the supplier - Which earthworm species and tissue were used for this lot, and where did the raw material come from? - What plate, standard and conditions produced the U/g result? - What is the protein content, by which method, and what specific activity follows from it? - Can you send the SDS-PAGE pattern and the reference it was compared with? - If the result is disputed, will you join a re-test on the retention sample? Written answers to those five questions make an identity file. One activity percentage does not. The product hub lists the catalogue values. The COA page explains where each result appears on the certificate; the grades page compares the physical options; the nattokinase comparison explains why the units differ; the methods page covers the assay framework and the quality page describes the release file. ### 01 What the COA for 5-MTHF actually contains URL: https://nutrition.rainwoodbio.com/products/vitamins/5-mthf/coa/ Reviewed: 2026-11-19 The certificate for a 5-MTHF lot reports appearance, identification by HPLC and UV, assay by HPLC, water by Karl Fischer, pH of a 1% solution, the heavy-metal panel, microbiology and particle size. The catalog values are assay 95.0–101.0%, water ≤5.0% and pH 6.0–8.0; the batch COA confirms a particular pack. On this material the assay is a percentage of a calcium salt, so it is read with the water, the calcium figure and the isomer ratio that identify the form. In one lineThe assay is a percentage of a salt: it means something only beside the water content, the calcium figure and the isomer ratio that identify the form. ## Reading the certificate line by line A certificate works when a reviewer can audit it line by line. Each line needs the parameter, the method that produced the number, and the limit the lot was released against. “Conforms” is a conclusion; a conclusion without the test behind it is not evidence. Identity matters before assay. HPLC retention with a UV spectrum against a reference standard says the peak is the 5-methyl folate; it does not say which salt the peak came from. That is why the certificate also needs the form in the product name, the CAS number and, where the form is disputed, a calcium result. Identity, assay and release lines · 5-MTHF calcium salt | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | HPLC retention and UV spectrum against a reference | Conforms | Assay | HPLC with UV detection | 95.0–101.0% | Water | Karl Fischer | ≤5.0% | pH (1% solution) | Potentiometric | 6.0–8.0 | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh ## The assay basis, the water and the calcium The assay is reported either on the powder as received or on the dry matter, and the difference is not cosmetic. A lot that measures 96.0% as-is with 4.0% water calculates to 100.0% on the anhydrous basis (96.0 ÷ 0.96). A certificate that prints 96.0% without a basis has printed a number that could describe either powder. The basis belongs in the assay row, not a footnote, with the water result beside it. Water sits at ≤5.0% on the catalog. The solid is often written C₂₀H₂₃CaN₇O₆·xH₂O, so water of crystallisation is part of the mass balance, not an impurity to drive to zero. A lot at 4.8% water still passes, but it has less room for pickup in a humid store than a lot at 1.0%, and the as-is assay is diluted by the difference. The calcium figure is the other half of the salt check. The anhydrous salt is 8.06% calcium by mass (40.08 ÷ 497.52), and a result near that figure with a 95–101% assay is consistent with the 1:1 calcium salt. A low figure points to the free acid, the glucosamine salt or a dilution; all three can sit inside an assay range while carrying less folate per gram. Calcium is not a routine catalog line, so request it when the form is qualified, the source is new, or the label names the salt and the certificate does not. ## Release limit and batch result The release limit is the acceptance boundary for the lot; the result is what the laboratory measured on that lot. Both belong on the page in separate columns, with the method named beside them. What the result column should contain | Parameter | Release limit | Result column | Assay | 95.0–101.0% | A measured percentage, with the basis and the method | Water | ≤5.0% | A measured percentage from Karl Fischer | pH | 6.0–8.0 at 1% | The measured pH and the solution strength | Heavy metals | Per element | A figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot | Particle size | ≥95% through 40 mesh | The measured percentage through the sieve A result column that repeats the release range has copied the gate. Heavy metals need a measured figure for each element, never one summed total. Microbiology needs a count and an absence statement, and particle size needs the measured pass-through. ## What shifts from lot to lot Water moves first, because drying and packing decide it. The assay follows the water when it is quoted as-is. The isomer ratio moves with the synthesis and the crystallisation: the (6S) and (6R) diastereomers have the same mass and the same calcium content, so the calcium check cannot see a shift between them. A method that resolves the two forms is the only way to see it, and the ratio belongs on the certificate when the grade is sold on the natural isomer. Colour is the least quantitative line and often the first warning. White to off-white is a wide window, but a yellow or brown cast suggests oxidation and light exposure. Ask for the assay and the related-substance profile rather than rejecting on colour alone. Particle size is a finishing specification. The 40 mesh figure can change when the mill or the sieve changes without a change in the chemistry; a trend across lots says more than one result near an edge. ## When an outside test is worth ordering Use an outside laboratory when the source is new, the shipment is the first into a regulated market, the certificate cannot prove a form claim, or a result is disputed. The panel to choose is HPLC with a UV spectrum against a reference for identity and assay, water by Karl Fischer, calcium by ICP-OES, ICP-MS for the heavy metals, microbiology, pH, and a method that resolves the (6S) and (6R) forms. Ask the laboratory to state its detection limit for each screen. A “not detected” entry with no limit tells you about the method's sensitivity, not about the sample. Chain of custody matters as well: the material tested and the material retained should be the same sample, and the report should carry the lot identity. A contested result should go to a referee with the retained sample, the specification and the supplier's certificate in hand, and with a request for form-specific tests rather than a second run of the same assay. ## Comparing two suppliers Put six lines side by side: name and CAS number; assay result and basis; water; calcium and isomer ratio; microbiology and heavy metals; lot code and pack size. Two quotations that match on assay but differ on the basis or the isomer are describing different powders. Traceability is the next test: the certificate should name the manufacturer and lot, and the lot code should match the pouch, the drum and the retained sample. The catalog values are listed on the 5-MTHF product page. The tests that separate the salt from the other folates are set out on the identity page; storage is covered on the stability page; the HPLC method note describes the assay; release is on the quality page. Folic acid is a different product, with its own certificate lines on the folic acid page. ### 02 5-MTHF grades: the salt, the isomer and the particle URL: https://nutrition.rainwoodbio.com/products/vitamins/5-mthf/grades/ Reviewed: 2026-11-19 The catalog grade is calcium L-5-methyltetrahydrofolate, CAS 151533-22-1, with an assay of 95.0–101.0% by HPLC, water ≤5.0%, pH 6.0–8.0 and ≥95% through 40 mesh. Within that name there are still choices: the (6S) isomer ratio, the water content, a standard or a granulated powder, and other folate salts that are different materials rather than strengths of the same one. The label and the dosage form fix the grade before the powder does. In one line5-MTHF is a family name: the calcium salt, the isomer ratio and the particle size are three separate specification lines before the powder is the same material. ## Why 5-MTHF is not one grade “5-MTHF” names the reduced 5-methyl folate, not a single powder. The methyl group sits at N5 of the pteridine ring, and the molecule carries a chiral centre at C6. The naturally occurring (6S) form and the (6R) form are diastereomers with the same mass and the same elemental analysis, so a certificate that reports only a percentage has not said which one is in the drum. Commercial material is sold as a salt, because the free acid is less convenient to handle and less soluble. The calcium salt is a 1:1 salt with a molecular weight of 497.52 and a calcium content of 8.06%. The glucosamine salt is another commercial salt with its own mass, its own assay convention and its own label name. The free acid, levomefolic acid, CAS 31690-09-2, is the parent molecule and a reference material rather than a drop-in replacement. A purchase order that says “5-MTHF” has specified none of this. The isomer question is a grade question, not a laboratory detail. A product sold on the natural isomer should state the (6S) content or the diastereomer ratio on the certificate; a powder that meets the assay range while carrying a larger (6R) fraction is not the same material per milligram. ## The grades and forms side by side 5-MTHF grades and the neighbouring folate materials | Grade or form | What it is | Assay convention | Where it fits | Calcium L-5-MTHF, 40 mesh (catalog) | 1:1 calcium salt, standard powder | HPLC 95.0–101.0%; water ≤5.0% | Capsules, tablets and stick packs | Calcium L-5-MTHF, granulated | Same salt, larger and freer-flowing particles | Same chemistry; a new particle-size line | Blends that need flow and low dust | (6S)-5-MTHF glucosamine salt | Different counter-ion and different mass | Separate salt, assay and label name | Only where the label and file name it | 5-MTHF free acid | Levomefolic acid, no counter-ion | Reference-standard grade | Standards and non-aqueous work | Folic acid | Fully oxidised pteroylmonoglutamic acid | 97.0–102.0% on the anhydrous basis | A different ingredient with its own file The first two rows describe the same material with a different particle profile. The last three do not: they are different purchases, with different label names, assay methods and market files. A quotation that presents them as interchangeable has compared words, not drums. ## Solubility, appearance and handling The calcium salt is a white to off-white, free-flowing powder. It dissolves in water to give a solution that is neutral to slightly alkaline, which matches the 6.0–8.0 pH line on the catalog. It is not a colorant and should not be judged like folic acid's yellow-orange crystal: a yellow or brown cast in a 5-MTHF lot suggests oxidation or light exposure, not a stronger grade. The standard powder passes 40 mesh at ≥95%. Granulation makes the powder freer-flowing and less dusty, but it is a specification change, not a packing choice: the particle-size line moves, the blend behaviour moves, and the stability study should cover the granular form if that is what will be bought. At a dose measured in micrograms, the ingredient is a small fraction of the blend, so flow, static and segregation decide uniformity more than the drum assay does. Both grades need a sealed, light-resistant pack. The 1 kg foil pouch and the 25 kg fiber drum are described on the MOQ page, and the storage rationale is on the stability page. ## Dose arithmetic and the dosage form The salt factor follows from the molecular weights. The 5-MTHF acid is 459.46 g/mol and the anhydrous calcium salt is 497.52 g/mol, so the folate fraction is 459.46 ÷ 497.52 = 0.9235. One milligram of the anhydrous salt carries about 0.924 mg of 5-MTHF acid. A label that declares 400 µg of folate as 5-MTHF acid needs 400 ÷ 0.9235 = 433 µg of the salt at 100% assay, or about 442 µg at 98% assay. The arithmetic is not a recommendation; it is how the label and the weigh-out are reconciled. The isomer ratio enters the same calculation. If a lot carries a larger (6R) fraction, the mass of the natural (6S) form per milligram is lower, and a formula built on the assumption of pure (6S) will under-deliver. Ask for the ratio and use it in the weigh-out, or buy a grade that states it. The dosage form narrows the choice further. A capsule or tablet takes the standard 40 mesh powder, but the fill is hygroscopic and the excipients can transfer moisture. A stick pack or drink mix suits the salt because it dissolves; a granulated grade helps flow in a blend. A gummy brings water activity and process heat into the decision, and the stability work should be run in the gummy rather than borrowed from a capsule. In every case the grade, the particle size and the isomer claim should be written into the specification before the first blend. ## Specification lines for the grade - “Calcium L-5-methyltetrahydrofolate, CAS 151533-22-1, C₂₀H₂₃CaN₇O₆·xH₂O, calcium salt (1:1).” - “Assay 95.0–101.0% by HPLC, with the basis stated on the certificate; water ≤5.0% by Karl Fischer.” - “pH 6.0–8.0 at 1% in water; appearance white to off-white.” - “Calcium about 8.06% on the anhydrous basis where the form is to be confirmed.” - “Diastereomer ratio: state the (6S) content or the (6S)/(6R) ratio.” - “Particle size ≥95% through 40 mesh, or the agreed granulated profile, with the contaminant and microbiological limits as tabulated.” - “Destination market and the label name of the salt confirmed before the order.” The catalog values are listed on the 5-MTHF product page. The folic acid comparison continues on the level-four page; the COA page explains how those lines are reported; the form tests are on the identity page; the other folate ingredient has its own folic acid page. ### 02.1 5-MTHF vs folic acid: the active folate and the salt URL: https://nutrition.rainwoodbio.com/products/vitamins/5-mthf/grades/5-mthf-vs-folic-acid/ Reviewed: 2026-11-19 Folic acid (CAS 59-30-3, C₁₉H₁₉N₇O₆, 441.40 g/mol) and 5-MTHF (the calcium salt here, CAS 151533-22-1, 497.52 g/mol) are different molecules. Folic acid is the fully oxidised pteroylmonoglutamic acid; 5-MTHF is the reduced 5-methyl form, supplied as a calcium salt. The difference changes the folate mass per milligram, the ingredient name on the label and the stability of the powder. In one lineFolic acid and 5-MTHF are different molecules with different masses and different label names, so a dose cannot be moved from one to the other without the arithmetic and the market file. ## Two folate molecules, not two strengths Folic acid is the synthetic, fully oxidised form of the vitamin. Its pteridine ring is aromatic and its glutamate tail is free; it carries no methyl group and no calcium. 5-MTHF is the reduced form with a methyl group at N5 and a hydrogen at C6, which gives it a chiral centre. In the commercial calcium salt, one calcium ion balances the molecule, and the anhydrous mass rises to 497.52 g/mol. The two are related in the body: folic acid is reduced and methylated before it joins the folate pool, and 5-MTHF is the main circulating form. That relationship is a reason to keep the names apart on a label, not a reason to use the powders interchangeably in a formulation. One is an acid, the other is a calcium salt with a different mass, solubility and stability profile. Folic acid and 5-MTHF calcium salt compared as materials | Property | Folic acid | 5-MTHF calcium salt | CAS number | 59-30-3 | 151533-22-1 | Formula | C₁₉H₁₉N₇O₆ | C₂₀H₂₃CaN₇O₆·xH₂O | Molecular weight | 441.40 | 497.52 (anhydrous) | Chemical state | Fully oxidised | Reduced, 5-methyl | Counter-ion | None | Calcium, 1:1 | Appearance | Yellow to orange crystalline powder | White to off-white powder | Water solubility | Slightly soluble; soluble in dilute alkali | Soluble; neutral to slightly alkaline solution ## The folate fraction changes the weigh-out The 5-MTHF acid has a molecular weight of 459.46; the anhydrous calcium salt is 497.52. The folate fraction of the salt is therefore 459.46 ÷ 497.52 = 0.9235, so one milligram of the salt carries about 0.924 mg of 5-MTHF acid. Folic acid does not have this step: one milligram of folic acid is one milligram of the acid, which is why a folic acid assay percentage and a 5-MTHF assay percentage have different denominators. The arithmetic is easy to get wrong. A 99.0% assay on the calcium salt carries about 91.4% folate as the acid (0.990 × 0.9235), not 99.0%. A label claim of 400 µg of folate as 5-MTHF acid needs 400 ÷ 0.9235 = 433 µg of the salt at 100% assay, about 442 µg at 98% assay, and about 460 µg if the powder also carries 4% water and the assay is anhydrous. The same 400 µg claim from folic acid needs 400 µg of the acid, subject to its assay correction. At a microgram dose the extra mass is small in absolute terms, but it is not zero in a blend: it changes the fill weight, the amount of excipient and the uniformity calculation. Build the weigh-out from the salt factor, the assay basis and the water, and say in the finished-product specification which form the number refers to. ## What the label has to declare In the EU, the ingredient list names the salt and the nutrition declaration gives folate in micrograms, with the EU nutrient reference value of 200 µg used for the percentage. The percentage is calculated from the folate in the serving, so the salt has to be converted to folate mass first. The permitted-source rules are form-specific; the buyer's regulatory team confirms the entry for the destination and the current consolidated text, as of this review. On a US label, the Supplement Facts panel gives folate in dietary folate equivalents against a Daily Value of 400 mcg DFE for adults and children aged four years and older. The ingredient list still names the salt, and the DFE factor is set by the labelling rule rather than by the molecular weight alone. A factor written for folic acid does not carry over to a methylfolate salt; the label review settles the arithmetic. Two label points follow. The upper intake level usually quoted for folate, 1,000 µg/day, is expressed for folic acid, so it is not a 5-MTHF number carried across by mass. “Methylfolate” alone is not a complete ingredient name: the counter-ion belongs in it, and the calcium salt is a different label entry from the glucosamine salt. ## Stability is not shared between the forms Folic acid is the more robust of the two as a dry powder: it is crystalline, only slightly soluble in water, and tolerates dry storage and direct compression, though it is still light-sensitive. The reduced 5-MTHF is more reactive. It oxidises, it is degraded by light, and in solution it is sensitive to pH, with acid conditions the ones to avoid. The calcium salt and the sealed foil pouch exist to manage that reactivity, not to remove it. A folic acid stability study does not cover a switch to 5-MTHF. The degradants and the assay method are different, and the loss curve in the same matrix can be steeper. If a formula moves from one to the other, the stability work, the overage and the storage statement all have to be rebuilt around the new material. The 5-MTHF stability page sets out the protocol. ## What changes when the form changes A switch is a new specification, not a substitution at the balance. It changes the ingredient name and the CAS number, the assay method and its validation, the weigh-out, the label declaration, the market file and the stability data. The HPLC method used for folic acid will not quantify the calcium salt without revalidation, and a method that does not resolve the two forms cannot prove which one is in the drum. Fix the label form and the destination route first, then calculate the mass from the salt factor and the assay basis, then confirm the particle size and the grade, then run the stability study in the finished matrix. A project that picks the powder first and adjusts the label afterwards usually repeats the work. The folic acid side of the comparison is set out on the folic acid product page and its form comparison. ## When each form is the right purchase Folic acid is the right purchase when the label and the market file name folic acid, when the dry blend wants a crystalline acid with a long storage history, and when the formulation has been built around it. 5-MTHF is the right purchase when the label declares the active folate, when the market file covers the calcium salt, and when the formula and the stability data have been built around its mass and its reactivity. This is the form we supply. Neither is a drop-in for the other; the choice is not a preference between two names for the same vitamin. Catalog values are on the 5-MTHF product page; the grades page sets this comparison among the other forms; the COA page shows how the salt is reported; the HPLC method note describes the separation; the quality page covers release. ### 03 5-MTHF stability: light, oxygen and the pack URL: https://nutrition.rainwoodbio.com/products/vitamins/5-mthf/stability/ Reviewed: 2026-11-19 5-MTHF calcium salt is sensitive to light, oxygen and moisture, and heat accelerates all three. The sealed foil pouch is the stable format; an aqueous solution is the least stable and its pH matters. The retest period should come from data on the exact pack and matrix, not from the certificate. In one line5-MTHF is degraded by light and oxygen, and the pack and the pH of the matrix decide how much of the dose survives the retest period. ## The dry powder and its two enemies The catalog sets water at ≤5.0%. That limit is a release gate, not a storage allowance. Once the foil pouch is opened, the powder can pick up moisture from the air; the water figure rises, the as-is assay falls, and the powder may become less free-flowing. A tight seal and a dry store are part of the specification in practice, even when they are not printed on the certificate. Light is the second driver. The folate ring is photolabile, and a clear container on a bench or a windowsill is an exposure. The powder should stay in its original light-resistant pouch or in an opaque container that closes properly. A glass jar on a shelf is not a storage container for this material, however tidy it looks. Heat raises the rate of both moisture and light damage. A normal warehouse temperature is usually acceptable for the sealed pack; a hot loading bay, a car boot or a greenhouse is not. After cold storage, let the sealed pack equilibrate to room temperature before opening it, so that condensation does not form on the powder. ## The solution: pH, oxygen and hold time The calcium salt dissolves in water to give a solution that is neutral to slightly alkaline; the catalog pH is 6.0–8.0 at 1%. In solution, light, oxygen, heat and pH act at the same time. Acid conditions are the ones to avoid: the 5-methyl folate is least stable when the matrix pushes the pH down, and a fruit-flavoured drink is exactly that kind of matrix unless it is buffered or the hold is short. A ready-to-drink process adds a heat load through pasteurisation or hot fill; a powder stick avoids that step because the consumer adds water at the point of use. If a liquid is unavoidable, shield it from light, hold the pH in range, keep oxygen low, and prove the hold time before filling. Bulk-powder data does not transfer to a beverage. The matrix, the process and the pack all alter the rate, so the drink has to carry its own shelf-life data. ## What moves the material during storage Factors that move 5-MTHF calcium salt during storage | Factor | Effect on the material | What keeps it in check | Light | Fades the colour and lowers the assay | Foil or opaque pack; dark store | Oxygen | Oxidises the reduced folate | Small headspace; sealed pack | Moisture | Raises water and dilutes the as-is assay | Sealed pouch; desiccant if needed | Heat | Speeds up oxidation and moisture pickup | Cool, controlled store | pH | Acid matrices destabilise the solution | Buffer the matrix; limit the hold | Metal ions | Promote oxidation in solution | No iron or copper contact The factors act together rather than one at a time. A warm, bright, humid store compounds all three, and a clear bottle of an acidic drink compounds them again. The useful stability question is not “is 5-MTHF stable?” but “stable in which pack, at which pH, for how long?” ## Designing the stability study A useful protocol fixes four things: the pack, the condition, the time points and the tests. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% relative humidity cover the warehouse; accelerated storage at 40 °C/75% relative humidity stresses the pack. A light-exposure arm covers the failure mode that a dark incubator misses, and it should be run in the same pack that will be sold. Test assay, water, pH, appearance, the isomer ratio, related substances and microbiology at each point. When the application is a beverage or a stick pack, repeat the work in the matrix at the process pH and heat load. The report should list each result rather than a single pass statement, and should name the pack and the lot family. A study run on a different pack from the same product family answers a different question. ## The finished formula changes the question A capsule or tablet keeps water activity low, though the shell and the excipients can still pass moisture. Check water at release and after storage, and check the appearance of the fill. For a stick pack, the seal and the foil are the critical points; a pinhole is a failure, so inspect the strip as well as the powder. A gummy combines water activity, process heat and a matrix that can hold the folate in solution; it needs its own study. A beverage combines light, pH, heat and oxygen. Bulk stability is where the work begins, not where it ends. Whether an overage is needed is a label and stability decision for the formulator, and it does not repair a pack that lets moisture in or a matrix at the wrong pH. ## How the retest period is assigned We do not publish a single shelf-life number for 5-MTHF; the pack and its storage history decide it. The retest period belongs on the specification and rests on the stability data for that pack. A figure quoted without a pack, a condition and a test panel is a promise, not a shelf life. After the retest period, re-assay the retained sample before extending use. Do not extend by assumption, and do not apply a bulk figure to a repacked container. The product hub lists the standard packs; release tests are on the COA page; pack and lead time on the MOQ page; the HPLC note describes the assay; the quality page describes the release workflow. ### 04 5-MTHF MOQ: 1 kg, packs and the first order URL: https://nutrition.rainwoodbio.com/products/vitamins/5-mthf/moq/ Reviewed: 2026-11-19 The MOQ for 5-MTHF is 1 kg, supplied in a foil pouch; the bulk pack is a 25 kg fiber drum, and the standard lead time is 1–7 days. A firm quotation needs the salt form, the assay basis, the isomer ratio, the quantity and pack, the destination and the intended use. In one lineOne kilogram is the minimum order, and because the dose is measured in micrograms that pack is large enough to cover the trial, the retained sample and a repack. ## Why one kilogram is the floor A 1 kg pack of 5-MTHF is a large quantity by dose. At a 400 µg folate serving it contains 2.5 million servings, so the minimum is not set by how much a formulator needs; it is set by what can be packed, sampled, tested and traced as one lot. Below 1 kg the material is usually split from a larger lot and repacked, which adds handling and loses the original pack identity without changing the chemistry. The same arithmetic makes the 25 kg drum a serious commitment. For a brand using a few kilograms a year, a drum is a multi-year supply, and the retest period matters more than the handling saving. The minimum is a pack decision, not a volume incentive; buy the pack that matches the trial, not the drum that looks efficient on paper. The 1 kg pack is also the qualification unit. It can cover a bench trial, a pilot blend, a retained sample and an independent identity test, all from the same lot code. A smaller bench quantity can be discussed, but it is a split from a bulk lot and should be documented as one. ## The pack options Standard 5-MTHF packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | First trial or small batch | Foil blocks light and moisture; close it again after use | Fiber drum | 25 kg | Production | Liner inside; lot code on both drum and liner | Granulated powder | On request | Flow and dust control | New particle profile; stability data for the granule The catalog form is a 40 mesh powder: ≥95% through 40 mesh. Granulation is a different specification, not a packing choice, because the particle-size line and the blend behaviour both move. If the dosage form needs a freer-flowing powder, say so before the quotation; the change may also move the lead time. A pre-blend with a carrier is a different product again, with a carrier to declare and a label to match. ## Lead time and the dispatch date The standard pack is offered at 1–7 days from order confirmation. The window covers picking, documents and dispatch; transit, customs and the customer's own release sit outside it. A custom granulation or a non-standard pack adds time; the quotation should carry that as a separate line. Request the dispatch date as well as the lead time. A drum usually moves on a pallet, while a pouch can go as a parcel; the Incoterm decides who books freight and who clears customs. The documents should travel with the lot, not after it. ## What makes a quotation firm Six items make a quotation firm enough to compare: - Product and form. Calcium L-5-methyltetrahydrofolate, CAS 151533-22-1, with the salt written out. - Specification. Assay and basis, water, pH, calcium where the form is to be confirmed, and the isomer ratio. - Quantity and pack. 1 kg pouch, 25 kg drum, or the granulated variant. - Destination and Incoterm. Country, port or address, plus the trade term. - Documents. COA, specification and SDS, plus any statement the importer needs. - Intended use and market. Whether the material goes into a supplement or another food, and the country of sale. A quotation that leaves out the isomer ratio or the assay basis is incomplete for this material, because those two lines decide the weigh-out and the label. The same powder may fit one market and fall outside the file for another, and the paperwork is part of the offer. Commercial terms are stated on the quotation, not on this page. ## A sample has to be a lot The 1 kg pack is the qualification sample. Test identity, assay, water, calcium and the isomer ratio before scaling, and keep a retained sample drawn from that pack, and check that the lot code on the sample, the COA and the quotation agree. Without a lot code, a sample is a demonstration rather than a qualification. Because the material is used at micrograms, one pack can support several bench trials and still leave a retained sample. That is a reason to keep the pack sealed and dry between trials, not a reason to split it into unlabelled jars. If the project needs a smaller quantity, discuss it before ordering and record the repack. ## What to settle before the first order The commercial side of the offer is the Incoterm, the pack, the lead time and the document set. The quality side belongs in the same conversation: specification revision, COA per lot, retained sample, retest period and change control. Settle the quality terms in writing before the first production order; a dispute is the wrong time to invent them. Replacements and returns are governed by the quotation and the quality agreement. A lot that fails the agreed specification should go to the retained sample and a joint re-test, not to a photograph of the powder. Agree in advance who covers the referee test and which laboratory both sides will accept. Catalog values are listed on the product hub; release tests on the COA page; the salt and isomer choices on the grades page; the MOQ glossary entry defines the term; the quality page describes the release file. ### 05 The regulatory file for 5-MTHF URL: https://nutrition.rainwoodbio.com/products/vitamins/5-mthf/compliance/ Reviewed: 2026-11-19 5-MTHF is supplied as calcium L-5-methyltetrahydrofolate, CAS 151533-22-1, and the regulatory file is built around that exact salt, the folate declaration and the destination. The catalog specification and the batch COA describe the material; the buyer's regulatory team confirms the route for the market. This page lists the framework, the limits and the documents that belong in the file, so that the specification and the pack on the purchase order can be read as one file. In one lineThe specification describes the salt; the regulatory file has to show the form, the folate declaration and the destination route behind it. ## What belongs in the file A usable file settles four questions. Which material and which specification revision are being bought? Which lot is being released, and what does its certificate show? Which contaminant limits and label rules govern the finished product? And what happens when the supplier, the route or the pack changes? The COA covers the lot, the TDS covers the specification and the SDS covers handling; none of the three settles the route. The file should also hold the allergen and GMO declarations, the origin record, the residual-solvent statement, the isomer statement and any customer-specific declaration. Where a statement is missing for the lot, name the gap before the order rather than at the port. A version-controlled document list is worth more than a folder of undated PDFs. ## European Union In the EU, the file starts from the specification, the contaminant results and the label. General food law and the food-information rules under Regulation (EU) No 1169/2011 apply, and food supplements are governed by Directive 2002/46/EC, which carries a list of vitamin and mineral substances permitted for use in supplements. Where the route relies on that list, the entries are form- and salt-specific, and the current consolidated text is the reference rather than a summary. The buyer's regulatory team confirms which entry, if any, covers the material for the destination member state. The folate declaration uses the EU nutrient reference value of 200 µg, and the label percentage is calculated from the folate content of the serving, not from the mass of the salt. A product that names one salt on the ingredient list and calculates the percentage from another will not reconcile. If the source is not covered by the permitted list, a novel-food route under Regulation (EU) 2015/2283 may be the relevant framework; the buyer confirms whether it applies and what the authorisation covers, as of this review and against the current text. ## United States The US file is built around the dietary ingredient, its source and its intended use. The Supplement Facts panel gives folate in dietary folate equivalents, with a Daily Value of 400 mcg DFE for adults and children aged four years and older; the ingredient list names the salt. The DFE factor is set by the labelling rule; a factor written for folic acid is not a factor for a methylfolate salt. The label review settles the arithmetic. Where a source relies on a new dietary ingredient notification, that notification is specific to the source and the use, and the buyer confirms that it covers the material and the finished product. The certificate does not establish the route, and a supplier's marketing statement is not a substitute for the filing. The label and any claim are reviewed separately from the certificate. ## Contaminants and the finished product The contaminant numbers have to be calculated on the finished product, not only measured in the drum. The table below is the usual starting point for a food-supplement file; the destination text and the daily dose set the final figure. Contaminant reference values for a supplement | Contaminant | Reference limit for a supplement | Evidence the file needs | Lead (Pb) | 3.0 mg/kg in the supplement | A measured lot result, the method and the finished-product calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | A measured lot result and any category exception | Mercury (Hg) | 0.10 mg/kg in the supplement | A measured lot result and the method | Arsenic (As) | Customer or market limit | The agreed limit and the method, stated on the certificate The upper intake level usually quoted for folate is 1,000 µg/day, and it is expressed for folic acid rather than for 5-MTHF. It is a folic-acid number and cannot be carried across to a 5-MTHF dose by mass arithmetic; the destination text and the form decide how the limit is applied. Check the current text before the label is signed off. ## Label wording and claims The label names the material, the amount and the source as the destination requires. The claim review is separate: the brand's regulatory reviewer confirms that the wording is permitted for the product, the form and the market. A certificate is not a claim approval, and a claim cannot alter the specification. We make no health claim on this page. Any folate claim has to be selected from the destination's permitted list, worded as the list words it, and supported by the dose in the finished product. A claim written for folic acid does not transfer to a methylfolate salt without a check, because the ingredient name and the declared folate figure both change. ## Documents to keep with each lot Documents in the 5-MTHF file | Document | What it answers | Scope | Certificate of analysis | What this lot measured, by which method, against which limit | Per lot | Technical data sheet | The catalog specification and the form | Per grade | Safety data sheet | Handling, storage and transport | Per grade | Allergen, GMO and origin statements | Source and cross-contact questions | Per lot or per site | Residual-solvent and isomer statements | Process residues and the (6S)/(6R) ratio | Per lot Each document should carry the specification version it refers to. A certificate issued against an old revision is not evidence for the current purchase, even when the numbers look the same. ## Before the first order - Specification version, CAS number and the exact calcium salt are named. - The folate declaration and the salt name on the label match the destination file. - The COA, TDS, SDS and the supporting statements (allergen, GMO, origin, residual solvents, isomer) are present. - Each contaminant result has been converted to the finished-product dose. - The claim wording has been checked against the destination's permitted list. - Source, process and pack are under change control, and the quotation, specification and certificate refer to the same version. Catalog values are listed on the product page; the COA page explains the lot certificate; analytical evidence is on the identity page. Release is handled on the quality page, and the EU and US notes give the framework references. Folic acid is a separate ingredient, with its own file on the folic acid page. ### 06 How we prove a 5-MTHF lot is the calcium salt URL: https://nutrition.rainwoodbio.com/products/vitamins/5-mthf/identity/ Reviewed: 2026-11-19 A 5-MTHF lot is the calcium salt when four lines agree: the document names calcium L-5-methyltetrahydrofolate and CAS 151533-22-1, HPLC retention and UV match the reference, calcium is close to the theoretical 8.06%, and the water and assay reconcile the mass balance. The assay alone cannot separate the salt from the free acid, the glucosamine salt or a dilution. The calcium figure and the isomer ratio are the checks that do. In one lineIdentity is four agreeing measurements: the document names the salt, HPLC and UV identify the folate, calcium confirms the counter-ion and the water closes the mass balance. ## Four measurements that must agree A certificate may carry the right name and still fail to prove it. The layers below are separate questions, and each one needs its own evidence; an answer to the first alone describes a document, not a drum. Four layers of 5-MTHF calcium identity | Layer | Question | Test | What it proves | Label and COA | Does the paperwork name calcium L-5-MTHF? | Product name, CAS number and salt ratio | Document completeness | Chromatography | Is the peak the 5-methyl folate? | HPLC retention plus UV spectrum | The folate nucleus | Counter-ion | Is calcium the counter-ion? | Calcium by ICP-OES, about 8.06% | The 1:1 salt | Stereochemistry and balance | Is it the (6S) form, and is it diluted? | (6S)/(6R) ratio, water, assay | Grade and mass balance ## The calcium ratio and the isomer ratio The calcium salt is a 1:1 salt. The anhydrous molecular weight is 497.52, of which 40.08 is calcium, so the theoretical calcium content is 8.06%. A result close to that figure, with a 95–101% assay, is consistent with the calcium salt. A low figure points to the free acid, the glucosamine salt or a dilution; a high figure points to another calcium salt or a calcium-containing carrier. Calcium by ICP-OES is the direct test, and the pH of a 1% solution is a supporting check rather than a quantitative one. The isomer ratio answers a different question. 5-MTHF has a chiral centre at C6, and the naturally occurring (6S) form and the (6R) form are diastereomers with the same mass and the same calcium content. The calcium figure cannot see the difference. Only a method that resolves the two forms can report the ratio, and the certificate should state the (6S) content or the (6S)/(6R) ratio when the grade is sold on the natural isomer. A powder that passes the assay and the calcium check can still carry more of the (6R) form than the specification intended. The two ratios together are stronger than either alone. A low calcium figure with a normal assay suggests a non-calcium salt or a dilution; a normal calcium figure with a poor isomer ratio suggests the right salt made with the wrong stereochemistry. Ask for both when the source or the process is new. ## What XRD adds, and what it does not XRD addresses a separate issue: what solid form is present, and does its pattern agree with a reference? It separates a crystalline salt from an amorphous solid, compares the hydrate form of two sources and shows when a lot has changed solid form after drying or milling. It is not a purity assay, and it does not measure the counter-ion or the isomer ratio. Before accepting a “match” statement, request the reference pattern and the detection limit. A report that says only “XRD conforms” without the pattern has added little. XRD earns its place when solid form is the question, when two suppliers claim the same grade, or when a lot behaves differently in a blend than its certificate suggests. When a lot is disputed, the solid-state pattern, the calcium figure, the HPLC/UV data and the isomer ratio reinforce one another. ## How a substitution shows up Common 5-MTHF substitutions and the signals | Adulterant | What it does | Signal | Test | Folic acid | Fully oxidised; no methyl group and no calcium | Different retention; calcium low | HPLC/UV, calcium | Calcium folinate | A different reduced folate, the 5-formyl form | Different retention; calcium normal | HPLC/UV with a resolving method | Glucosamine salt | A different counter-ion and a different mass | Calcium low; label name wrong | Calcium by ICP-OES, HPLC | (6R) diastereomer | Same mass and same calcium, wrong configuration | Isomer ratio shifts | HPLC that resolves the two forms | Dilution | Lowers the folate per gram | Assay low; calcium low | Mass balance, calcium | Moisture | Raises water and lowers the as-is assay | Water high; anhydrous assay normal | Karl Fischer Colour is the weakest signal. White to off-white is a wide range, and a yellow or brown cast is more likely to mean oxidation or light exposure than a deliberate substitution. The strong signals are the retention and the UV spectrum, the calcium figure, the isomer ratio and the mass balance. A certificate that gives colour and a percentage but no identity evidence has left the most likely substitution untested. ## Writing identity into the specification - “Calcium L-5-methyltetrahydrofolate, CAS 151533-22-1, C₂₀H₂₃CaN₇O₆·xH₂O, calcium salt (1:1).” - “Assay 95.0–101.0% by HPLC, with the basis stated; water ≤5.0% by Karl Fischer.” - “Identification by HPLC retention and UV spectrum against a reference standard.” - “Calcium about 8.06% on the anhydrous basis, by ICP-OES, where the form is to be confirmed.” - “Diastereomer ratio: state the (6S) content or the (6S)/(6R) ratio.” - “No folic acid or other folate above the stated limit, by a method that resolves the forms.” - “Particle size ≥95% through 40 mesh with the sieve method named; contaminant and microbiological limits as tabulated.” ## Five questions to put in writing - What salt is in this lot, and what CAS number does the certificate carry? - Will you release the chromatogram and the UV spectrum, not just the assay figure? - What calcium result did ICP-OES give, and by which method? - What is the (6S)/(6R) ratio for this lot, and which method resolved it? - Would you agree to a joint re-test of the retained sample if the lot were contested? Written answers to all five give a buyer something to audit; an assay percentage alone gives a number. Catalog values are listed on the product hub; the COA page explains where each figure belongs on the certificate; the grades page explains the salt and isomer choices; the methods index covers the assay families, and the HPLC and XRD notes describe the separations; the quality page covers release and the retained sample. ### 01 What the COA for beta-carotene 10% CWD actually contains URL: https://nutrition.rainwoodbio.com/products/vitamins/beta-carotene/coa/ Reviewed: 2026-11-19 The COA for a beta-carotene 10% CWD lot describes a preparation, not a pure pigment. It should carry the UV/Vis assay (10.0–11.0%), identity against a beta-carotene standard, loss on drying, the heavy-metal and microbiology panels, and the particle size. Two lines are easy to overlook and decide how the rest reads: the carrier, which is most of the powder, and the assay basis, which fixes what the percentage means. The limits below are the catalog specification; a lot certificate is the evidence for a particular pack. In one lineThe certificate has to separate the carotenoid from the powder: a 10.0–11.0% UV/Vis assay on the preparation, the carrier declared beside it, and the loss on drying that explains the rest of the mass. ## What belongs on the page Read a certificate as a lab report. Each row needs a parameter, a method, a release limit and a measured result. “Conforms” without a method is an assertion; a result without a limit cannot be judged. For a dispersion, identity and carrier are both structural. Identity establishes the chromophore; the carrier explains the other nine-tenths of the powder, and with it the label, the allergen position and the cold-water behaviour. Release tests and methods for beta-carotene 10% CWD | Parameter | Release limit | Method | Assay | 10.0–11.0% beta-carotene | UV/Vis against a beta-carotene standard | Identification | Spectrum matches the standard | UV/Vis; maxima in the 440–457 and 470–486 nm ranges | Appearance | Orange-red to red powder | Visual | Loss on drying | ≤5.0% | Gravimetric | Heavy metals | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | ICP-MS | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Plate count and absence tests | Particle size | ≥95% through 40 mesh | Sieve analysis | Carrier and antioxidant | Declared by name | Supplier declaration Assay comes first because it is the number buyers compare. Identity comes second because an assay without identity could be measuring the wrong carotenoid. Carrier comes last because it is the line most often missing. ## What the percentage is a percentage of Ten to eleven per cent means grams of beta-carotene per 100 g of powder. It is not a purity figure. A 100 mg scoop carries 10–11 mg of the carotenoid; a gram carries 100–110 mg. A 96% crystal carries 960 mg/g, so the two percentages describe different articles and cannot be lined up as if they were concentrations of the same material. The certificate also has to name the basis. Is the result on the powder as supplied, or corrected for moisture? With loss on drying at 5.0%, a lot at 10.0% as supplied calculates to about 10.5% on the dried basis. A specification written on one basis cannot be checked against a certificate written on the other. The measurement has its own variables: solvent, wavelength and standard. Beta-carotene has maxima in the 440–457 nm and 470–486 nm ranges. A degraded standard or the wrong solvent shifts the result with no change in the powder. Ask for the method and the standard's assigned value, not only the percentage. ## Limit, result and the space between A limit is a gate; a result is a measurement. A result column that repeats the range tells the reader nothing about the lot. Each row should carry a number, and the number should be traceable to a method. What a usable result column contains | Parameter | Release limit | Result column | Assay | 10.0–11.0% | A measured percentage, with solvent and basis | Identification | Spectrum matches | The maxima, or the spectrum attached to the report | Loss on drying | ≤5.0% | A measured percentage | Heavy metals | Per element | mg/kg for lead, arsenic, cadmium and mercury separately | Microbiology | Counts and absence | The count plus the absence statement | Particle size | ≥95% through 40 mesh | The measured percentage through the sieve | Carrier | Declared | Name and percentage Microbiology needs two pieces of evidence: a count and an absence statement. Heavy metals need one figure per element; a single total hides the one that is high. Identity needs a spectrum; a retention time alone is half a result. ## Why two lots of the same grade differ The spray dryer, the carrier lot and the mill move the assay, the colour, the moisture and the particle size. Encapsulation efficiency matters as well: carotenoid sitting at the particle surface is exposed to oxygen and fades before the total assay falls. Colour is a wide window. Orange-red to red tolerates a shift, and a duller cast is not automatically an identity failure. It can mean oxidation, a different carrier or a long hold at temperature. Compare the retained sample rather than a photograph. Isomerisation is the quiet variable. Heat, light and acid convert all-trans beta-carotene to cis forms, which absorb differently and colour less strongly. The total assay can stay in range while the colour performance drops. For colour-critical work, ask for the HPLC profile beside the UV/Vis assay. Read trends, not single points: assay drifting down, moisture creeping up, a new peak in the chromatogram. The lot code should run through the certificate, the pouch, the drum and the retained sample. ## When an outside laboratory earns its fee Use an independent laboratory for a new source, a first shipment to a regulated market, a disputed result, or a claim the supplier's paperwork cannot support. The panel is UV/Vis identity and assay with a certified standard, HPLC carotenoid profile, loss on drying, ICP-MS metals, microbiology and a solvent-residue screen. If the label names the carrier, add a carrier identity check. If it says natural or synthetic, add a source audit: the assay cannot tell the two apart because the molecule is the same. Origin is a documentary claim, not an analytical result. Insist on detection limits. “Not detected” without a limit describes the method, not the lot. Keep the tested sample as the retained sample, and put the lot code on the report. ## How to read two quotations side by side Compare the grade and CAS number; the assay and its basis; the carrier and antioxidant; the colour window; moisture and particle size; metals, microbiology and pack. Agreement on 10% is not agreement on the material if the carriers differ. Then check traceability: the manufacturing site, the carrier source, the antioxidant, and a lot code that runs through the pack and the retained sample. The catalog specification is on the beta-carotene product page. The difference between this dispersion and the crystal is set out on the grades page. Analytical methods are in the methods library, release practice is on the quality page, and the provitamin A conversion is on the vitamin A page. ### 02 Beta-carotene grades: 10% CWD powder, oil dispersion and crystal URL: https://nutrition.rainwoodbio.com/products/vitamins/beta-carotene/grades/ Reviewed: 2026-11-19 Beta-carotene is sold as a pure crystal and as diluted, encapsulated preparations. The catalog form is a 10% cold-water-dispersible powder specified at 10.0–11.0% by UV/Vis; 1% powders, oil dispersions and 96% crystals are different specifications with different carriers and labels. The grade decides how the carotenoid is weighed, how it disperses and how much colour one gram delivers. In one lineThe grade is the delivery system: the same carotenoid at 1%, 10% or 96% behaves differently in water, in oil and on the label. ## Why beta-carotene is sold in several grades Beta-carotene is a fat-soluble pigment with an intense colour and a low effective dose. The pure crystal is difficult to weigh accurately at milligram scale, does not disperse in water, and is exposed to air on every particle surface. A diluted, encapsulated powder solves the handling problem: the carotenoid is divided into fine particles, protected by a carrier and an antioxidant, and made wettable so that it disperses in cold water. The dilution is not a cosmetic difference. It is a formulation that changes the physical behaviour, the colour strength and the label declaration. A buyer who orders “beta-carotene” without the grade has not said which of these materials is wanted. ## The grades side by side Typical beta-carotene grades and what they are for | Grade | Beta-carotene | Carrier | Water dispersion | Typical use | 1% CWD powder | About 1% | Starch or gum plus antioxidant | Yes | Colour at low dose; dry mixes | 10% CWD powder (catalog) | 10.0–11.0% | Declared carrier plus antioxidant | Yes | Capsules, sticks, beverages | 10% oil dispersion | About 10% | Vegetable oil | No | Softgel fill; oily foods | 96% crystal | ≥96% | None | No; oil-soluble | Oil-based systems; high concentration The percentages in the first column are the carotenoid content of the preparation, not its purity. The 10% and 1% rows describe dispersions; the 96% row describes the colouring matter. Only the 10% CWD powder is the catalog form on this page; the other rows are the market grades a buyer may be offered under the same generic name. ## Colour, particle size and dispersion The catalog powder is orange-red to red and free-flowing, with at least 95% passing 40 mesh. In cold water it wets and disperses to an orange, cloudy liquid. That cloud is the point: the carotenoid is present as fine particles in a carrier, not as a dissolved molecule. A clear beverage needs a different formulation, not a longer stir. The pure crystal is a dark red to violet solid, practically insoluble in water and soluble in oils and organic solvents. It is crystalline and dense compared with a spray-dried powder, and it does not wet out in water without an emulsifier. An oil dispersion sits between the two: the carotenoid is already dissolved or suspended in oil, so it mixes into a fatty matrix but not into an aqueous one. Colour strength follows the carotenoid content, not the weight of powder. One gram of the 10% powder carries roughly one-tenth of the colour of one gram of the 96% crystal, before any difference in isomer profile or carrier colour is considered. Formulators who switch grade without recalculating the colour load usually over-colour or under-colour the batch. ## Dose arithmetic when you change grade The arithmetic is simple and easy to get wrong. To deliver 10 mg of beta-carotene, the 10% powder needs about 91–100 mg, depending on whether the lot assays 11.0% or 10.0%. The 96% crystal needs about 10.4 mg. A 1% powder would need about 1 g, which is impractical in a small capsule but normal in a dry mix or a colour application. The carrier mass matters in a capsule or a tablet. A 10 mg dose from the 10% powder brings about 90 mg of carrier and antioxidant with it, and that mass has to fit the fill weight and the excipient budget. In a stick pack or a beverage the carrier is less of a constraint; in a small capsule it can decide whether the dose is feasible at all. Overage is a separate decision. Beta-carotene loses colour and assay during storage, and the overage is set from stability data for the finished formula, not from the certificate. Adding extra powder to cover an expected loss changes the label declaration, so the overage belongs in the specification and the label review together. ## What to write into the specification - “Beta-carotene 10% cold-water-dispersible powder, CAS 7235-40-7, C40H56.” - “Assay 10.0–11.0% beta-carotene by UV/Vis; state the solvent, wavelength and basis.” - “Identification by UV/Vis spectrum against a beta-carotene standard.” - “Loss on drying ≤5.0%; particle size ≥95% through 40 mesh.” - “Carrier and antioxidant declared by name on the certificate.” - “Heavy metals and microbiology as listed; colour within the orange-red to red window.” - “Destination market and intended use — colour or nutrient — confirmed before the order.” A specification that names the grade, the carrier and the assay basis is a purchase specification. One that says only “beta-carotene powder” leaves the supplier free to choose the grade, and the first difference usually appears at the filling line. ## When another grade is the right choice The pure crystal is the right starting point for an oil-based softgel fill, a transparent oil colour or a system where the carrier mass is unwanted. It is not a drop-in for the 10% powder: it will not disperse in water, it needs an oil phase and an antioxidant, and the label no longer carries a carrier declaration. The 10% CWD powder is the practical choice for capsules, stick packs, dry mixes and beverages where a uniform orange dispersion is wanted. It is the wrong choice for a clear drink, for a purely oily matrix, or for a formula that cannot accept the carrier mass or an allergen the carrier may bring. Switching in either direction needs a new specification, a new dose calculation, a stability check in the matrix and a label review. The product hub carries the catalog specification; the level-four comparison takes the 10% versus crystal question further; the vitamin A page covers the provitamin A side; the methods library describes the assay; the quality page covers release. ### 02.1 Beta-carotene 10% powder vs pure crystal: carrier, colour and label URL: https://nutrition.rainwoodbio.com/products/vitamins/beta-carotene/grades/beta-carotene-10-percent-vs-pure/ Reviewed: 2026-11-19 A 10% cold-water-dispersible powder and a pure beta-carotene crystal are not two strengths of the same ingredient. The powder contains about 10–11 g of beta-carotene per 100 g, with the rest made up by carrier, antioxidant and moisture; the crystal is at least 96% colouring matter and does not disperse in water. The choice changes the mass on the scale, the colour in the matrix and the name on the label. In one lineThe 10% powder is a preparation and the crystal is the colouring matter: the carrier, the colour strength and the label change with the grade. ## The two materials side by side Beta-carotene 10% CWD powder against the pure crystal | Property | 10% CWD powder | Pure crystal | Beta-carotene content | 10.0–11.0% | ≥96% colouring matter | Carrier | Present and declared | None | Water dispersion | Disperses in cold water | Does not disperse | Oil solubility | Not designed as an oil concentrate | Soluble in oils and organic solvents | Appearance | Orange-red to red powder | Dark red to violet crystalline solid | Mass for 10 mg beta-carotene | About 91–100 mg | About 10.4 mg at 96% | Label declaration | Preparation with a carrier | Colouring matter without a carrier The table is a specification comparison, not a ranking. The crystal is not a stronger version of the powder; it is a different physical form with a different use. The powder is not a diluted crystal; it is an engineered dispersion that makes a lipophilic pigment behave in water. ## The carrier is most of the powder In the 10% powder, roughly nine parts of the mass are carrier, antioxidant and moisture for every one part of beta-carotene. The carrier divides the carotenoid into fine particles, keeps them from clumping, lets the powder wet out in cold water and protects the pigment surface from oxygen. The antioxidant, usually a tocopherol or ascorbyl palmitate, slows the oxidation that would otherwise fade the colour. Common carriers are modified food starch, gum arabic, gelatin and alginate. They are not interchangeable: they differ in allergen status, in whether they are acceptable to a vegetarian or halal specification, in their film-forming behaviour and in how they release the carotenoid in the mouth or the gut. A carrier change is a specification change, not a purchasing detail. The crystal has no carrier to declare, but it also has no protection built in. It needs an oil phase, an antioxidant and an opaque pack to be stable in use. The absence of a carrier is an advantage only when the formulation already supplies those things. ## The 10:1 ratio and the assay basis The 10% figure is a ratio, not a purity grade. One hundred grams of powder contains 10–11 g of beta-carotene; one gram contains 100–110 mg; one milligram of powder contains about 0.1 mg of beta-carotene. The crystal at 96% contains 960 mg per gram. Converting between the two is a division by the carotenoid content, and the result is the mass that has to be weighed. The comparison only works when both assays are on the same basis. The 10% figure is normally reported on the powder as supplied. The 96% figure is reported on the colouring matter, and the EU purity criterion is written on that basis. A 10% result on a dried basis and a 10% result as supplied are not the same powder when the loss on drying differs. There is a second ratio behind the label: the amount of beta-carotene that counts as vitamin A. In the EU, 1 µg of retinol equivalent is 6 µg of all-trans beta-carotene; in the US, 1 µg RAE is 12 µg of dietary beta-carotene, or 2 µg of beta-carotene in oil from a supplement. Those factors are applied to the carotenoid mass, not to the powder mass. Using the powder weight in the conversion overstates the vitamin A by a factor of about ten. ## Colour strength and what the matrix does The 10% powder disperses in water to an orange, cloudy liquid. The cloud is the dispersed carotenoid and carrier; it is what gives a beverage or a stick pack its colour. The crystal dissolved in oil gives a clear orange solution instead. Neither is more “natural” than the other; the difference is physical. Colour strength follows the carotenoid content. Replacing 100 mg of the 10% powder with 10.4 mg of the 96% crystal delivers the same beta-carotene, but only if the crystal is fully dissolved and the powder was fully dispersed. In practice the two are not interchangeable in a water-based matrix: the crystal will not dissolve, and the powder may not dissolve in oil. Beta-carotene fades. Light, oxygen, heat and metal ions bleach the colour, and the rate depends on the matrix and the pack. A dye can match the initial shade but not the spectrum or the fading behaviour. Colour matching should be done in the finished matrix, under the finished pack, not on a powder sample in a dish. ## What the label has to say In the EU, beta-carotene used as a colour is the additive E160a(ii), and the ingredient list declares it in the colour class, for example “colour: beta-carotene” or “colour: E160a(ii)”. Used as a source of vitamin A, it is a nutrient, and the nutrition declaration uses retinol equivalents with the 6:1 conversion. The carrier in the 10% powder is part of the preparation and has to be declared when it remains in the finished food; the crystal brings no carrier. In the United States, the colour additive route is 21 CFR 73.95 and the nutrient route is the GRAS affirmation at 21 CFR 184.1245. A dietary supplement declares beta-carotene in the Supplement Facts panel in mcg RAE, and may state the share of vitamin A that comes from beta-carotene; the conversion depends on the matrix. The same powder can be a colour in one product and a nutrient in another; the label follows the use, not the supplier's description. “Beta-carotene 10%” is a specification, not a label name. The label names beta-carotene and declares the preparation's carrier if it is present. A label that says only “10% beta-carotene” has described the concentrate, not the finished product. ## When to choose which Choose the 10% CWD powder for capsules, tablets, stick packs, dry mixes and beverages where a uniform orange colour and a water dispersion are wanted. It is the practical way to deliver a small dose of a lipophilic pigment into a water-based product, and the carrier is declared. The catalog form here is the 10% powder. Choose the pure crystal when the formulation is oil-based, when a clear oil colour is wanted, or when the carrier mass or the carrier's allergen status is unacceptable. It is not a drop-in for the powder: the dose mass falls by about a factor of ten, the dispersion step disappears, and the label loses the carrier declaration. Switching either way needs a new specification, a new dose calculation, a colour match in the matrix, a stability check and a label review. The product hub carries the catalog specification; the grades page places this comparison in the wider range; the vitamin A page covers the nutrient conversion; the methods library describes the UV/Vis assay; the quality page covers release. ### 03 Beta-carotene 10% CWD: stability, light and the pack URL: https://nutrition.rainwoodbio.com/products/vitamins/beta-carotene/stability/ Reviewed: 2026-11-19 Beta-carotene 10% CWD is sensitive to oxygen, light and heat, and moisture accelerates the loss. The sealed foil pouch, a dry store and a cool temperature are what keep the colour and the assay; an open pouch, a clear container or a warm loading bay shortens the useful life. Shelf life is assigned from stability data for the exact pack and storage condition, not from the release certificate. In one lineBeta-carotene fails by oxidation and fading; the pack has to exclude light, moisture and air, and the shelf life belongs to that pack. ## The powder: oxygen, moisture and colour The catalog sets loss on drying at ≤5.0%. That is a release gate, not a storage allowance. Once the foil pouch is opened, the powder can pick up moisture from the air; the carrier becomes sticky, the powder cakes, and the loss on drying rises. The assay on the powder as supplied falls with the moisture, even before any carotenoid is lost. Oxygen is the more direct cause of fading. Beta-carotene is a long polyene chain with many sites for oxidation, and the reaction bleaches the colour. The antioxidant in the preparation slows the process but is consumed over time; a pouch with a large headspace and a loose fold has more oxygen available than a freshly heat-sealed one. Light is the third driver. Beta-carotene absorbs strongly in the visible range, and the same absorption that makes it a colour makes it vulnerable to photodegradation. The powder should stay in its opaque or foil pack, or in a light-resistant container that closes properly. A clear jar on a bench is an exposure, however short. Heat raises the rate of all three. Ambient warehouse temperatures are usually acceptable for a sealed pack; a hot loading bay, a car boot or a greenhouse is not. After cold storage, let the sealed pack equilibrate before opening so that condensation does not form on the powder. ## The dispersion: the least stable format The 10% powder disperses in water to an orange cloud, not a true solution. In that dispersion the carotenoid particles are exposed to water, dissolved oxygen, light and heat at the same time. A beverage process adds a pasteurisation or hot-fill step, and the heat load can fade the colour before the product reaches the shelf. If a liquid is unavoidable, protect it from light, keep dissolved oxygen low, control the pH and validate the hold time before filling. A bulk-powder stability result does not transfer to a beverage: the matrix, the process and the pack each change the rate. The drink's shelf life has to be measured in the drink. The same caution applies to a gel or a gummy. Water activity, pH and the cooking temperature all act on the carotenoid, and the colour can migrate or fade while the assay on the raw powder is still in specification. ## What drives degradation Factors that move beta-carotene 10% CWD during storage | Factor | What it does | Control | Oxygen | Oxidises the polyene chain; colour fades | Sealed pack; low headspace; antioxidant | Light | Photodegradation; colour and assay fall | Opaque or foil pack; dark store | Heat | Accelerates oxidation and isomerisation | Cool store; controlled process temperature | Moisture | Caking, carrier mobility, higher loss on drying | Sealed pouch; dry store; desiccant where needed | Metal ions | Catalyse oxidation, especially iron and copper | Avoid metal contact; use compatible equipment | Acid and pH | Isomerisation and colour shift in liquids | Validate the matrix pH; buffer if needed These factors are not independent. A warm, bright, humid store is worse than the sum of three separate effects, and a beverage in clear glass combines light and oxygen with any heat in the process. The useful question is not “is beta-carotene stable?” but “stable in which pack, at which condition, for how long?” ## A stability protocol for the ingredient A useful protocol states the pack, the storage condition, the time points and the tests. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% relative humidity cover the warehouse; accelerated storage at 40 °C/75% relative humidity stresses the pack. A light-exposure arm is essential for this material, because a dark incubator misses the failure mode that a shop window creates. Test assay, loss on drying, appearance and colour, UV/Vis identity and microbiology at each point. Colour should be measured, not only described, so that a shift can be compared with the starting point. For a beverage, a stick pack or a gummy, repeat the work in the matrix and at the process temperature and pH. Ask for the summary for the pack you will buy, not for a different pack from the same product family. A 1 kg pouch and a 25 kg drum have different headspace, different opening histories and different surface-to-volume ratios; the data belongs to the pack. ## The finished formula changes the answer A capsule or tablet has low water activity, but the shell and the excipients can still transfer moisture. Check loss on drying at release and after storage, and check the appearance of the fill. A stick pack depends on the seal and the foil; a pinhole is a failure, and the strip should be inspected, not only the powder. A gummy combines heat, water and an acidic pH, and the carotenoid is dispersed in a gel that may be translucent. A beverage combines light, oxygen, pH and a heat step. In both, the ingredient's bulk stability is the starting point, not the answer. The formulator decides whether an overage is needed; that is a label and stability decision, and it does not repair a pack that lets oxygen in. ## How the shelf life is set We do not publish a single shelf-life number for beta-carotene 10% CWD, because the pack and the storage condition set it. The assigned retest period belongs on the specification and is supported by the stability file for that pack. A number without a pack, a condition and a test panel is not a shelf life; it is a claim. After the retest period, re-assay the retained sample before extending use. Do not extend by assumption, and do not carry a bulk figure across to a repacked container. The product hub lists the standard packs; the COA page covers the release tests; the methods library describes the assay; the quality page describes the release workflow; the vitamin A page covers the nutrient conversion that the label may use. ### 04 Beta-carotene 10% CWD: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/vitamins/beta-carotene/moq/ Reviewed: 2026-11-19 The MOQ for beta-carotene 10% CWD is 1 kg, supplied in a 1 kg foil pouch; the bulk pack is a 25 kg fiber drum. Lead time is 1–7 days for the standard pack. A firm quotation needs the grade, the carrier, the assay basis, the quantity and pack, the destination and Incoterm, and the documents for the market. In one lineOne kilogram is the smallest pack that can be sampled, tested and traced as a lot; the 25 kg drum is the production unit. ## Why the minimum is 1 kg A 1 kg pouch is enough for a bench trial, a retained sample and an independent test, and it is small enough to ship as a parcel. The pack carries a lot code, so the material tested, the material retained and the material used in the trial can be the same lot. That is the point of a minimum: a traceable unit, not a gesture. The 10% powder is a low-dose ingredient. One kilogram carries about 100–110 g of beta-carotene, which is a large number of trial servings at a milligram dose. The constraint on a first order is usually the trial size and the analytical work, not the carotenoid mass. A 25 kg drum is the production unit: it reduces handling per kilogram, but it also commits inventory and a longer storage period. Below 1 kg, the material is normally split from a larger lot and repacked. That adds handling, loses the original pack identity and makes traceability harder, without changing the chemistry. Ask for a documented repack if a smaller bench quantity is needed. ## Packs and formats Standard beta-carotene 10% CWD packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Light and moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Particle profile is a specification change The catalog form is a 40 mesh powder: at least 95% through 40 mesh. Granulation is not a packing choice; it changes the particle-size line, the dispersion behaviour and possibly the lead time. If the dosage form needs a coarser or freer-flowing powder, say so before the quotation. ## Lead time and dispatch The standard pack is quoted at 1–7 days from order confirmation. That window covers picking, document preparation and dispatch; it does not include shipping transit, customs clearance or the customer's own quality release. A custom granulation or a non-standard pack adds time, and the quotation should state it separately. Ask for the dispatch date, not only the lead time. A 25 kg drum may travel on a pallet and a 1 kg pouch may travel as a parcel; the Incoterm decides who books the freight and who clears the entry. The documents should travel with the lot, not after it, and the lot code on the invoice should match the pack. ## What a quotation needs Six items make a quotation firm enough to compare: - Product and grade. Beta-carotene 10% CWD powder, CAS 7235-40-7, with the grade and carrier named. - Specification. Assay and basis, carrier and antioxidant, loss on drying, particle size, heavy metals and microbiology. - Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated variant. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, specification, SDS, and any market-specific statement the importer needs. - Intended use and market. Colour or nutrient, supplement or food, and the market where it will be sold. A quotation that names only “beta-carotene” has left the grade and the carrier open. The same generic name covers a 10% dispersion, an oil suspension and a 96% crystal, and the label and the dose change with the choice. We do not publish commercial terms on this page; they are stated on the quotation. ## The sample is a lot, not a demonstration The 1 kg pack is the qualification sample. Test identity, assay, loss on drying, dispersion in cold water and microbiology before scaling, and keep a retained sample from the same pack. The lot code on the sample, the COA and the quotation should match. A sample that cannot be traced to a lot is a demonstration, not a qualification. Test the dispersion in the intended matrix, not only in water. A powder that disperses cleanly in water can still speckle or sediment in a beverage at the process pH, and a colour match on the bench can shift after pasteurisation. The methods library describes the UV/Vis assay and the supporting tests. If the project needs a smaller quantity for a bench trial, discuss it before ordering. A split from a bulk lot is a repack with its own traceability, not the catalog pack, and it should be documented as such. Do not assume that a bench sample and the production drum will come from the same lot. ## Terms to settle before the first order The quotation sets out the commercial terms, the Incoterm, the pack, the lead time and the documents. The quality terms belong beside them: the specification revision, the COA per lot, the retained sample, the retest period and the change-control route for the carrier or the antioxidant. A carrier change can move the allergen statement and the label, so it belongs under change control. Returns and replacements follow the quotation and the quality agreement. A lot that fails the agreed specification should be handled through the retained sample and a joint re-test, not through a photograph of the powder. Ask who pays for the referee test, and which laboratory is acceptable to both sides. The product hub carries the catalog specification; the COA page lists the release tests; the compliance page covers the market files; the vitamin A page covers the nutrient route; the MOQ glossary entry defines the term; the quality page describes the release file. ### 05 The regulatory file for beta-carotene 10% CWD URL: https://nutrition.rainwoodbio.com/products/vitamins/beta-carotene/compliance/ Reviewed: 2026-11-19 A beta-carotene 10% CWD powder can be regulated as a colour preparation, as a nutrient source, or as both, depending on the market and the intended use. In the EU the colour entry is E160a(ii) under Regulation (EC) No 1333/2008, with purity criteria in Regulation (EU) No 231/2012; in the US the colour route is 21 CFR 73.95 and the nutrient route is the GRAS affirmation at 21 CFR 184.1245. The buyer's regulatory team confirms the route for the destination before the label is fixed. In one lineThe specification describes the powder; the regulatory file shows the route, the limits and the label for the destination. ## What the file contains A complete file answers four practical questions. What is the material, and which specification version is being bought? Which lot is being released, and what does its certificate report? Which route and label rules apply to the finished product? And what changes if the carrier, the source or the pack changes? The certificate, the technical data sheet and the safety data sheet answer different questions; none answers the route question on its own. For beta-carotene the route question has two branches. Used for colour, the material is a food additive and the additive entry, the purity criteria and the colour declaration apply. Used for vitamin A, it is a nutrient and the nutrition labelling and supplement rules apply. The same 10% powder can sit on either branch; the use decides, not the product name. ## European Union Beta-carotene is listed as the colour E160a(ii) in Regulation (EC) No 1333/2008. The regulation sets the food categories and maximum levels; the buyer's regulatory team confirms the category that covers the finished product and the level that applies. The purity criteria are in Regulation (EU) No 231/2012, which sets the assay at not less than 96% total colouring matter expressed as beta-carotene, together with the absorbance maxima and the residual-solvent limits. The 96% criterion is written for the colouring matter, not for a 10% preparation. The preparation has its own beta-carotene content and its carrier, and the buyer confirms how the preparation is covered by the additive entry and how the carrier is declared. For a food supplement, Directive 2002/46/EC and the national implementing rules apply alongside the additive rules. Labelling follows Regulation (EU) No 1169/2011. Where beta-carotene is declared as vitamin A, the nutrition declaration uses retinol equivalents: 1 µg RE equals 6 µg of all-trans beta-carotene. That conversion is applied to the carotenoid mass, not to the powder mass. Check the current consolidated text and the claims register as of this review. ## United States The colour additive regulation for beta-carotene is 21 CFR 73.95. It permits the additive for colouring foods generally, in amounts consistent with good manufacturing practice, and batches are exempt from certification. The nutrient route is the GRAS affirmation at 21 CFR 184.1245, which covers beta-carotene as a nutrient supplement under the conditions stated there. A dietary supplement is also subject to DSHEA labelling and cGMP rules. The Supplement Facts panel declares beta-carotene in mcg RAE, and may state the share of vitamin A that comes from beta-carotene. For vitamin A activity, 1 mcg RAE equals 12 mcg of dietary beta-carotene, or 2 mcg of beta-carotene in oil from a supplement; the matrix matters, and a dry dispersion is not automatically covered by the 2:1 factor. The buyer's regulatory team confirms the conversion and the route. The colour use and the nutrient use are different declarations. Beta-carotene added only as a colour need not be presented as vitamin A; beta-carotene presented as vitamin A has to meet the nutrient labelling rules. A supplier certificate does not choose between them. ## Contaminants and purity limits The release limits below are the catalog specification for the 10% powder. They are ingredient limits; the finished-product calculation is the buyer's. The EU additive specification also sets residual-solvent limits, and those results belong in the file when the powder is sold as a colour preparation. Release limits for beta-carotene 10% CWD and what the file should show | Parameter | Catalog limit | What the file should show | Assay | 10.0–11.0% by UV/Vis | Measured result, with solvent, wavelength and basis | Loss on drying | ≤5.0% | Measured percentage for the lot | Lead, arsenic, cadmium, mercury | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | A measured figure per element, plus the finished-product calculation | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | The count and the absence statement for the lot | Particle size | ≥95% through 40 mesh | The measured percentage through the sieve | Carrier and antioxidant | Declared | The name and the percentage, or a signed declaration The 10% assay and the 96% purity criterion are not the same gate. The 10% figure describes a preparation; the 96% figure describes the colouring matter. A specification has to say which article is being bought, because a preparation cannot meet a criterion written for the colouring matter. ## Claims and label language The file makes no disease-related claim for beta-carotene. In the EU, health claims must be authorised under Regulation (EC) No 1924/2006 and listed in the EU register; a vitamin A claim also depends on the finished product meeting the nutrient threshold for a “source” claim. In the US, a structure/function claim must be truthful and not misleading, and a supplement carrying one needs the DSHEA disclaimer. The brand's regulatory reviewer confirms the wording for the product, the form and the market. The label and the certificate are separate documents. A certificate does not approve a claim, and a claim does not change the specification. A product declaring beta-carotene as vitamin A uses the destination conversion, not the powder weight. ## Documents in the file - Specification with the grade, CAS number and assay basis. - Batch COA with the UV/Vis result, carrier and antioxidant declaration, contaminants and microbiology. - Technical data sheet and safety data sheet. - Allergen, GMO and origin statements; natural versus synthetic origin if the label uses that word. - Carrier and antioxidant specifications, and residual-solvent results where the additive specification applies. - Vitamin A calculation for the finished product, if the nutrient route is used. - Change-control record for the source, carrier, antioxidant and pack. Where a statement is not available for the lot, the gap should be named before the order, not discovered at the port. A document list with version numbers is more useful than a folder of undated PDFs. The product hub carries the catalog specification; the identity page covers the analytical evidence; the vitamin A page covers the nutrient side; the methods library describes the tests; the quality page describes the release file. ## Checklist before the first order - The grade, CAS number, assay basis and carrier are named in the specification. - The intended use — colour or nutrient — and the destination market are written on the order. - The COA, TDS, SDS, allergen, GMO, origin and solvent statements are on file. - The contaminant results are converted to the finished-product dose. - The label and the claim have been reviewed for the destination, including the vitamin A conversion. - The carrier, antioxidant, source and pack are under change control. ### 06 How we prove a beta-carotene 10% lot is the named material URL: https://nutrition.rainwoodbio.com/products/vitamins/beta-carotene/identity/ Reviewed: 2026-11-19 A beta-carotene 10% lot is the named material when four lines agree: the document names beta-carotene and CAS 7235-40-7, the UV/Vis spectrum shows the carotenoid maxima, the HPLC profile is consistent with beta-carotene rather than another carotenoid, and the mass balance adds up to 10–11% carotenoid plus carrier, antioxidant and moisture. XRD answers the solid-form question, not the assay. A single percentage cannot separate a cold-water dispersion from an oil dispersion or an oxidised lot. In one lineIdentity is the agreement of the document, the spectrum, the carotenoid profile and the mass balance; a single assay percentage does not prove the grade. ## The identity layers A certificate can name the right material and still fail to prove it. The layers below are separate questions, and each one needs its own evidence. A supplier who answers only the first has described the paperwork, not the powder. Layers of beta-carotene 10% identity | Layer | Question | Test | What it proves | Document | Is the grade and CAS named? | Specification, COA, label | Paperwork only | Spectrum | Is the chromophore beta-carotene? | UV/Vis maxima and absorbance ratios | The carotenoid, not the carrier | Profile | Is the isomer pattern consistent? | Reverse-phase HPLC | All-trans and cis content | Mass balance | Is the powder 10%? | Assay, loss on drying, carrier data | Consistency of the numbers | Solid form | Is the carotenoid crystalline? | X-ray diffraction | The physical form, not the purity The spectrum is the first analytical layer because beta-carotene has a distinctive absorption pattern. A dye can match the orange colour, but it does not reproduce the two maxima and the fine structure of the carotenoid spectrum. The HPLC profile is the second layer: it separates beta-carotene from other carotenoids and from its own cis isomers. ## The ratios that carry the proof The first ratio is the dilution. The 10% figure means 10–11 g of beta-carotene per 100 g of powder, so a 100 mg sample carries about 10–11 mg. That ratio is by design, not a purity result. A 10% powder is mostly carrier by design; a crystal that assays 96% is a different grade, and the two numbers should never be compared directly. The second ratio is spectral. Beta-carotene has absorbance maxima in the 440–457 nm and 470–486 nm ranges, and the ratio of the absorbances at those maxima, together with the shape of the curve, is compared with a standard. A shifted maximum or a changed ratio points to a different carotenoid, a degraded standard or a cis-rich sample. A small peak near 330–340 nm is a further signal of cis isomers. The third ratio is the isomer profile. Heat, light and acid convert all-trans beta-carotene to cis forms, which absorb differently and colour less intensely. Two lots can report the same total beta-carotene and behave differently in a beverage because their all-trans content differs. Where colour is the function, ask for the HPLC profile, not only the UV/Vis total. ## X-ray diffraction and the solid form X-ray diffraction answers a different question: is the solid crystalline, and does its pattern match a reference? The pure crystal gives sharp reflections. A spray-dried 10% powder is largely amorphous carrier, so its pattern is often dominated by a broad halo, with weak or absent carotenoid reflections. XRD can detect crystalline carotenoid in a powder that should be fully dispersed, or a change in the carrier, but it cannot quantify the 10% content. XRD is not a routine release test for this product. It is useful when the question is solid form, when a lot behaves differently from its certificate, or when two sources are being compared. Ask for the reference pattern and the detection limit before reading a “match” statement. A certificate that reports only “XRD conforms” without the pattern has added little. ## What adulteration looks like Common beta-carotene substitutions and the signals | Adulterant | What it does | Signal | Test | Dye | Matches the orange colour | No carotenoid maxima or fine structure | UV/Vis spectrum, HPLC | Other carotenoid | Similar colour, different molecule | Different retention and spectrum | HPLC, mass spectrometry | Carrier dilution | Lowers assay and colour strength | Mass balance does not add up | Assay, loss on drying, carrier data | Oxidised or cis-rich lot | Dull colour, lower colour strength | Cis peak; changed isomer ratio | UV/Vis, HPLC | Wrong grade | Oil dispersion sold as CWD powder | Poor water dispersion; oil on water | Dispersion test, carrier identity Colour is the weakest signal. Orange-red to red covers a wide range, and a dye can reproduce it. The stronger signals are the spectrum, the HPLC profile and the mass balance. A certificate that reports appearance and assay but not identity has left the most likely substitution untested. Natural and synthetic beta-carotene are the same molecule analytically. The origin claim is documentary: source, process and supplier audit. An assay cannot tell the two apart, and a certificate that says “natural” without a source statement is a label claim, not an identity result. ## How to write identity into the specification - “Beta-carotene 10% cold-water-dispersible powder, CAS 7235-40-7, C40H56.” - “Assay 10.0–11.0% beta-carotene by UV/Vis; state the solvent, wavelength and basis.” - “Identification by UV/Vis spectrum against a beta-carotene standard; report the maxima.” - “HPLC carotenoid profile; report the all-trans and cis content, with a limit if the colour function requires it.” - “Loss on drying ≤5.0%; carrier and antioxidant declared by name.” - “Heavy metals and microbiology as listed; particle size ≥95% through 40 mesh.” - “Origin statement where the label uses natural or synthetic.” ## Five questions for the supplier - Which grade is this lot — 10% CWD powder, oil dispersion or crystal — and which CAS number is on the certificate? - Can you provide the UV/Vis spectrum and the absorbance maxima, not only the assay percentage? - What is the HPLC carotenoid profile, and what is the all-trans to cis ratio for this lot? - What is the carrier and the antioxidant, and what is the loss on drying for this lot? - If the lot is disputed, will you accept a joint re-test on the retained sample? Five direct answers amount to an identity file. A single assay percentage does not. The product hub carries the catalog specification; the COA page shows where each figure sits on the certificate; the grades page compares the forms; the vitamin A page covers the nutrient conversion; the methods library explains the UV/Vis and HPLC work; the quality page covers release. ### 01 What the COA for PABA actually contains URL: https://nutrition.rainwoodbio.com/products/vitamins/paba/coa/ Reviewed: 2026-11-19 A PABA certificate reports appearance, identification by infrared and HPLC, assay by HPLC at 99.0–101.0%, loss on drying, the pH of a 1% suspension, the heavy-metal panel, microbiology and particle size. Each line needs its method, its release limit and a measured result. The limits in the first table are the catalog specification; the certificate is the document that shows what one lot measured against them. In one lineThe assay is an HPLC percentage against a 99.0–101.0% gate, and the identity line has to carry the infrared spectrum as well as the retention time before that percentage means anything. ## The certificate as a test report A certificate is auditable when each line can be read without the supplier in the room: what was measured, which method produced the number, and which limit the lot was released against. A row that says only “conforms” records a conclusion and withholds the evidence behind it. Two rows decide whether the document describes the right material at all. The identification row separates para-aminobenzoic acid from its methyl and ethyl esters and from the ortho and meta isomers, which share the same formula. The assay row then says how much of that material is present. An assay of 99.5% on the wrong isomer is a well-measured failure. Identity, assay, acidity and contaminants · PABA free acid | Parameter | Method | Release limit | Appearance | Visual | White to off-white crystalline powder | Identification | Infrared (KBr disc) and HPLC retention | Conforms to the reference | Assay, as received | HPLC, C18, ultraviolet near 285 nm | 99.0–101.0% | Loss on drying | Gravimetric, 105 °C | ≤0.5% | pH of a 1% suspension | Potentiometric | 3.0–4.5 | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh ## Basis, the narrow assay window and the moisture line The assay is reported on the material as received. The window is narrow because PABA is a small crystalline molecule with a strong ultraviolet chromophore: the chromatographic method is precise, and the ±1% band absorbs method variation and the small volatile fraction rather than permitting a dilution. Loss on drying is capped at 0.5%, so the as-is and dried-basis figures sit close together. A lot at 99.2% as received with 0.4% loss on drying calculates to 99.6% on the dried basis. The arithmetic is short, but the certificate should still name the basis, because two suppliers who report different bases are not offering the same number. A result slightly above 100.0% is not automatically an error. The standard's own purity, the integration and the injection volume all move the figure inside the band. A result above 101.0% is a different conversation: it points to a standard that has drifted, a sample weighed wet, or a peak that was integrated with something else. Identity is where the free acid is proved. Infrared shows the carboxylic acid and the primary amine; HPLC shows the retention time and ultraviolet spectrum. Neither alone is enough. An ester gives a clean single peak and a different infrared spectrum, and an isomer can give a similar spectrum at a different retention. ## Release limit against batch result The limit is the gate and the result is the measurement, so they belong in separate columns with the method beside them. A result column filled with the specification range is a copy of the gate, not evidence about a lot. What the result column should contain | Parameter | Release limit | Result column | Assay | 99.0–101.0% as received | A measured percentage, with the basis and the method | Loss on drying | ≤0.5% | A measured percentage | pH (1% suspension) | 3.0–4.5 | The measured pH of the suspension | Heavy metals | Per element | A figure in mg/kg for each element | Particle size | ≥95% through 40 mesh | The measured percentage through the sieve pH is the line most often reported as a bare range, and for this material it is worth reading closely. A 1% suspension at pH 3.0–4.5 is the free acid's own acidity. An ester has no acidic proton and would sit much closer to neutral, so a pH of 6.5 on a PABA certificate is a question about identity rather than about a drying deviation. ## What moves between batches Crystallisation sets the habit, the colour and the filterability; drying moves the loss on drying; milling and sieving move the 40 mesh result. The mesh line is a finishing specification, so it can change with a new mill without any change in the chemistry. Colour is the least quantitative line and often the most informative. White to off-white covers a real range, and a lot that is noticeably yellow has usually seen light, heat or a longer drying hold. Ask for the batch record and the storage history before rejecting on colour, and read the assay and the infrared spectrum at the same time. A trend across lots says more than one result near a limit: assay drifting down, loss on drying climbing, or a new small peak in front of the main one. The lot code on the certificate should match the pouch, the drum and the retained sample. ## When to order an outside test Order an independent test for a new source, a first shipment, a disputed result, or a claim the certificate cannot support. The useful panel is targeted rather than a full repeat: HPLC with the ultraviolet spectrum and infrared for identity and assay, loss on drying, ICP-MS for the metals, microbiology, and a nitrogen determination to test the mass balance. Two screens belong to this material. A chromatographic run against ortho- and meta-aminobenzoic acid standards answers the isomer question, and a scan of the ultraviolet maximum answers whether the peak is the acid or an ester. If an ester is suspected, hydrolysis followed by a headspace test for methanol or ethanol turns a suspicion into a measurement. Ask the laboratory for its detection limit on each screen. “Not detected” without a limit describes the sensitivity of the method, not the sample. Keep the chain of custody tight: the sample tested should be the retained sample, and the report should name the lot. ## What to compare between suppliers Six lines side by side: name with the CAS number; assay result and basis; infrared and HPLC identity; loss on drying and pH; metals and microbiology; pack, lot code and storage condition. Two offers that agree on assay but differ on identity or pH are not describing the same powder. The second layer is traceability: who made the lot, which route was used, and which drying and milling steps were applied. The catalog specification sits on the PABA product page. The tests that separate the acid from an ester are on the identity page; the chromatographic method is described in the HPLC method note; the release workflow is on the quality page. ### 02 PABA grades: one free acid, and the request that is really an ester URL: https://nutrition.rainwoodbio.com/products/vitamins/paba/grades/ Reviewed: 2026-11-19 The catalog PABA is a single chemical grade: free para-aminobenzoic acid at 99.0–101.0% by HPLC, milled to 40 mesh. There is no marker range to choose between, the way there is for a botanical extract. What varies between offers is purity, particle size and granulation, and the largest apparent “grade” choice is really a different material: the methyl, ethyl and octyl esters. In one linePABA is one chemical grade; the real fork is between the free acid and a different molecule, the ester that trades under the same family name. ## Why there is one grade, not a range PABA is a defined molecule with a single formula, C7H7NO2, a molecular weight of 137.14 and a melting range near 187–189 °C. A supplier can offer it at a tighter assay, at a finer or coarser mesh, or as a granulated powder, but none of those is a different composition. The grade conversation in this category is therefore about the finishing specification and the paperwork, not about a marker spectrum. That matters because grade language borrowed from botanicals suggests more choice than exists. “99%” and “99.5%” are two gates on the same substance, and a buyer who pays for the tighter one should ask what the extra step actually controls: a recrystallisation removes colour and some related substances, while a sieving step changes only the particle profile. The genuine fork is elsewhere. PABA is sold as the free acid and also as methyl, ethyl and octyl esters, and those are separate substances with their own CAS numbers. A quotation for “PABA” that does not name the acid is ambiguous, and the ambiguity is expensive when it reaches the label. ## The materials that get called PABA Free acid grades and the esters that are not grades | Material | What it is | Typical use | What changes | Free acid, 40 mesh | White crystalline powder, 99.0–101.0% by HPLC | Capsules, tablets, powder blends | The catalog grade on this page | Free acid, granulated | Agglomerated powder, freer flowing, less dust | Blends and high-speed tableting | Particle profile and flow; the assay gate is unchanged | Methyl ester | C8H9NO2, CAS 619-45-4 | Chemical intermediate and specialty uses | Different CAS, different label, no acid proton | Ethyl ester | C9H11NO2, CAS 94-09-7 | Benzocaine, a substance with its own file | A different regulatory object, not a PABA grade | Octyl dimethyl PABA | C17H27NO2, CAS 21245-02-3 | Cosmetic ultraviolet filter | Also methylated on the amine: a different substance and file The last three rows are materials, not upgrades. Each has its own molecular weight, its own analytical reference and its own name on a document. A switch between them is a change control, not a grade substitution. ## Solubility, acidity and handling The free acid dissolves to about 4.7 g/L in water at 20 °C, which is why the catalog calls it slightly soluble. It dissolves readily in ethanol and in alkaline solutions, where the carboxyl group is deprotonated and the salt forms in situ. A formulator who needs a clear aqueous concentrate adds a base and accepts the pH that follows; the 1% suspension sits at pH 3.0–4.5 without one. The powder is crystalline and free-flowing at 40 mesh, with a sieving specification of ≥95% through the sieve. It is light-sensitive, so the pack is a light barrier as well as a moisture barrier, and the storage condition belongs in the specification rather than in a note at the bottom of the certificate. Dust and static are handling issues rather than quality issues. A granulated grade reduces both, and it also reduces segregation in a blend where the PABA is a small fraction against heavier excipients. Granulation is quoted on request because it is a separate finishing run, not a stock variant. ## Dosage form and the label A capsule or tablet takes the 40 mesh powder directly at most fill weights; granulation is a flow decision, not a necessity. A powder blend needs a carrier that does not add moisture and a mix order that keeps the PABA from segregating. A stick pack or a drink mix is harder, because the acid needs a base to dissolve and the resulting pH has to be acceptable in the finished drink. PABA is not an established vitamin, so it has no nutrient reference value in the European Union and no Daily Value in the United States. The colloquial “vitamin B10” is trade shorthand, not a nutrient name that supports a percentage declaration. A label that carries a % NRV or % DV figure for PABA is describing a status the substance does not have. The label therefore names the substance: para-aminobenzoic acid, or 4-aminobenzoic acid, with the quantity per portion. That name has to match the certificate, and it has to be the free acid if the free acid is what was bought. An ester name on the label is a different declaration, and the file that supports it is a different file. ## What to write into the specification - “para-Aminobenzoic acid, CAS 150-13-0, C7H7NO2.” - “Assay 99.0–101.0% by HPLC, as received; state the basis on the certificate.” - “Identification by infrared and by HPLC retention; both lines reported.” - “Loss on drying ≤0.5%; pH of a 1% suspension 3.0–4.5.” - “Particle size ≥95% through 40 mesh; granulated on request.” - “Heavy metals and microbiology as listed; light-resistant pack and storage condition.” ## When the free acid is the wrong purchase An oil-phase cosmetic needs an ester, because the free acid does not partition into the oil and its acidity is unwelcome in that formula. A system that must sit near neutral pH needs an ester or a different buffer strategy. A market whose file names an ester is not served by a free-acid lot, however clean the certificate. The reverse is just as important. An ester is not a substitute for the acid in a capsule or a blend, because the mass, the identity and the label all change. The product hub carries the catalog numbers; the COA page shows how each line is reported; the ester comparison takes the chemistry further; the infrared method note explains the spectrum that tells them apart. For contrast, the EU vitamin annexes describe a vitamin form such as niacinamide, and they do not describe PABA at all. ### 02.1 PABA vs its esters: the free acid and the cosmetic esters URL: https://nutrition.rainwoodbio.com/products/vitamins/paba/grades/paba-vs-paba-esters/ Reviewed: 2026-11-19 Free PABA and the cosmetic esters differ at one functional group: the acid keeps its carboxylic acid, and the esters replace the acidic proton with an alkyl group. That single change moves the CAS number, the molecular weight, the water solubility, the ultraviolet maximum and the name that has to appear on a document. An ester is not a purer, finer or more soluble grade of PABA. It is another material with its own file. In one lineAn ester is a different molecule rather than a better grade, because the carboxyl group becomes an ester and the CAS number, the solubility and the label name change with it. ## One acid, three esters and a naming trap Esterification reacts the carboxyl group with an alcohol and removes the acidic proton; the amine on the ring stays where it is. The methyl ester, C8H9NO2 at 151.16, has CAS 619-45-4; the ethyl ester, C9H11NO2 at 165.19, has CAS 94-09-7. The free acid is C7H7NO2 at 137.14 and CAS 150-13-0. The trade name “octyl PABA” is the trap. In commerce it usually means octyl dimethyl PABA, also called padimate O, CAS 21245-02-3, C17H27NO2 at 277.40. It carries two methyl groups on the amine as well as an ethylhexyl ester group, so it is not the simple octyl ester. A purchase order that says “octyl PABA” can be read two ways. The free acid and the esters that trade under the name | Material | Formula | CAS number | Nitrogen | PABA free acid | C7H7NO2 | 150-13-0 | 10.21% | Methyl ester | C8H9NO2 | 619-45-4 | 9.27% | Ethyl ester | C9H11NO2 | 94-09-7 | 8.48% | Octyl dimethyl PABA | C17H27NO2 | 21245-02-3 | 5.05% The nitrogen column is a quick discriminator: each alkyl group adds mass without adding nitrogen, so the figure falls from 10.2% to 5.1% across the row. An assay result alone would not show it. ## Solubility and the acid proton The free acid dissolves to about 4.7 g/L in water at 20 °C, readily in ethanol, and much more readily in alkali, where the carboxyl group is deprotonated. The catalog records the consequence as the pH of a 1% suspension, 3.0–4.5. That acidity belongs to the acid and disappears with the proton. An ester has no acidic proton, so a 1% suspension sits far closer to neutral, and the pH line in a free-acid specification has no meaning for it. The esters are also lipophilic: they partition into oils and alcohols and are essentially insoluble in water. A formulator who wants the material in an oil phase needs that lipophilicity; one who wants a clear aqueous concentrate needs the acid plus a base. Handling follows the same split. The free acid dissolves in water with a base; the esters are handled in solvent or in the oil phase. A formula cannot be switched between them without rechecking the appearance and the pH. ## Ultraviolet absorption and what it does not tell you PABA absorbs strongly in the ultraviolet B region, with a maximum near 285 nm in the usual solvents, which is why it became a sunscreen active. The dimethyl ester shifts and broadens that absorption towards 310 nm, and the esters are the forms that survived in cosmetic practice. Absorption is a property of the molecule in solution; the protection a finished product gives is measured on the formula. The cosmetic route reads the finished-product concentration, not the batch assay. Annex VI of Regulation (EC) No 1223/2009 caps 4-aminobenzoic acid at 5% of the cosmetic as this review reads it, and the dimethyl ester at 8%; in the United States, 21 CFR 352.10(a) lists aminobenzoic acid at up to 15% and padimate O at 1.4–8%. The buyer's regulatory team confirms the current text. None of these figures is a supplement dose or a specification for the ingredient; they are ceilings for a different product category. ## What the label has to say A cosmetic ingredient list uses the international nomenclature name, so free PABA appears as PABA and the dimethyl ester appears as octyl dimethyl PABA or its equivalent. A supplement label works differently: it names the ingredient for the consumer, and for this material the name is para-aminobenzoic acid. The ester name on a supplement label declares a different substance, not a different grade of the same one. The ethyl ester is also known as benzocaine, an international nonproprietary name for an anaesthetic, and that history follows the molecule into every market. The methyl ester is largely an intermediate that a finished label rarely names. “Vitamin B10” is not a nutrient name that supports a declaration, and PABA has no nutrient reference value in the European Union or Daily Value in the United States. A label built on that phrase is building on a nickname. ## Telling the acid from an ester in the laboratory Infrared is the first screen. The free acid shows a broad carboxylic acid O–H, a carbonyl near 1,670 cm−1 and the two N–H stretches of a primary amine; the esters lose the acid O–H and move the carbonyl to a higher wavenumber near 1,710–1,720 cm−1. The fingerprint region then separates the methyl, ethyl and dimethyl esters from one another. HPLC retention gives a second answer, provided the method is run against the relevant ester standards rather than only against a PABA standard. Nitrogen closes the case: 10.2% for the acid against 9.3%, 8.5% and 5.1% for the esters. A hydrolysis step followed by a headspace test for methanol, ethanol or ethylhexanol turns a suspicion into a specific alcohol. The pH of a 1% suspension is the simplest check of all. A value near 3.5 supports the free acid; a value near neutral on a lot that is supposed to be the acid is a reason to stop and test rather than to adjust the formula. ## Choosing, and what a switch costs Choose the free acid for a capsule, a tablet, a powder blend or an aqueous concentrate where the label names para-aminobenzoic acid. Choose an ester only when the formula needs an oil-soluble ultraviolet filter and the cosmetic file covers that specific ester at its own ceiling. The two choices are made in different documents and reviewed by different people. A switch in either direction is a change control: a new specification, a new analytical reference, a new label name and, for the ester, a different regulatory file. It is not a substitution at the weighing bench. The product hub carries the free-acid specification; the grade page places these materials in the range; the identity page gives the tests that separate them; the infrared method note explains the spectrum; the quality page describes the release workflow behind each lot. ### 03 PABA is light- and moisture-sensitive; the pack sets the shelf life URL: https://nutrition.rainwoodbio.com/products/vitamins/paba/stability/ Reviewed: 2026-11-19 PABA is a light-sensitive crystalline solid. Sealed in its light-resistant pack it holds its assay for the assigned retest period; opened to air and light it yellows, cakes and loses assay. The powder is the stable format, an alkaline solution the least stable, and the pack is what separates the two. In one lineLight drives the colour change and moisture drives the caking, so the shelf life is set by the pack and the storage condition rather than by the certificate. ## The powder: moisture, light and colour The catalog caps loss on drying at 0.5%, which is a release gate and not a storage allowance. PABA is not strongly hygroscopic, but the crystal surface takes up water in a humid room, the powder cakes, and the as-received assay falls as the water fraction rises. A foil pouch that has been opened and folded over is no longer the pack that was tested. Light is the second driver and the more visible one. The aromatic amine is the site that reacts, and exposure turns a white powder cream, then yellow, then brown. The change is not a coating on the surface: it is the material, and a sieved or re-milled lot does not recover the original colour. Keep the powder in its original light-resistant pouch or in an opaque container that closes properly. Heat accelerates both processes. A normal warehouse is acceptable for a sealed pack; a loading bay in summer, a car boot or a greenhouse is not. After cold storage, let the sealed pack equilibrate to room temperature before opening, so that condensation does not form on the powder. ## The solution: the least stable format The free acid dissolves to about 4.7 g/L in water at 20 °C, and much more readily once a base is added. In solution, light, oxygen, heat and pH act together, and the alkaline condition that dissolves the acid also makes the amine easier to oxidise. A clear bottle on a bench is the wrong container for a hold, whatever the pH. A process that heats the solution adds a further load. If a liquid or a stick pack is unavoidable, protect it from light, fix the pH deliberately, keep dissolved oxygen low and validate the hold time before filling. A result from the bulk powder does not transfer to a beverage: the matrix, the process and the pack each change the rate. A concentrate is not a storage form either. A stock made at the bench and kept overnight is a hold with its own assay drift, and the drift is fastest where the pH is highest. Make up what the run needs, and record the hold time. ## What drives degradation Factors that move PABA during storage | Factor | What it does | Control | Light | Yellowing and browning; assay loss | Foil or opaque pack; dark store | Moisture | Caking; rises in loss on drying; lower as-received assay | Sealed pouch; desiccant where needed | Heat | Accelerates light and moisture damage | Controlled store; cool process | Oxygen | Oxidation of the amine, mainly in solution | Low headspace; sealed pack; process control | pH | Alkaline solutions discolour and lose assay faster | Fix and validate the matrix pH | Metal ions | Iron and copper catalyse colour formation | Avoid metal contact in the wet process These factors are not independent. A warm, bright, humid store is worse than the sum of three separate effects, and an alkaline solution in clear glass combines all of them. The useful question is not whether PABA is stable, but in which pack, at which condition, for how long. ## A stability protocol for the ingredient A protocol states the pack, the condition, the time points and the tests. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% cover the warehouse; accelerated storage at 40 °C/75% stresses the pack. A light-exposure arm covers the failure mode that a dark incubator cannot see, and for this material it is the arm that matters most. Test assay, loss on drying, appearance, infrared identity, pH of the suspension and microbiology at each point. Report the individual results rather than a pass statement, and identify the pack and the lot family. Ask for the summary that belongs to the pack you will buy: a 1 kg pouch and a 25 kg drum have different headspace and different opening histories. ## The finished formula changes the answer A capsule or tablet has low water activity, but the shell and the excipients still move moisture, and the fill can darken inside an opaque shell without anyone seeing it until the product is opened. Check loss on drying at release and after storage, and check the fill appearance at the same time. A blend is the harder case, because the partners matter. A hygroscopic excipient pulls water into the mix, and an alkaline partner raises the local pH; both change the rate. A stick pack depends on the seal and the foil, so inspect the strip and not only the powder. A beverage combines light, pH, heat and oxygen, and the free acid has to be neutralised to dissolve, which sets the pH high enough to matter. The bulk stability is the starting point, not the answer. The formulator decides whether an overage is needed; that is a label and stability decision, and it does not repair a pack that lets light in. ## How the shelf life is set We do not publish a single shelf-life figure for PABA, because the pack and the storage condition set it. The assigned retest period belongs on the specification and is supported by the stability file for that pack. A number without a pack, a condition and a test panel is a claim, not a shelf life. After the retest period, re-assay the retained sample before extending use. Do not extend by assumption, and do not carry a bulk figure across to a repacked container. The product hub lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the HPLC note describes the assay; the quality page describes the release workflow. ### 04 PABA: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/vitamins/paba/moq/ Reviewed: 2026-11-19 The PABA minimum is 1 kg, supplied as a light-resistant foil pouch, with a 25 kg fiber drum as the standard bulk pack. Lead time is 1–7 days for the catalog grade, and a granulated powder adds a finishing step to that window. A firm quotation needs six inputs: the material and its CAS number, the specification, the quantity and pack, the destination and trade term, the documents, and the market where the finished product will be sold. In one lineThe kilogram is the smallest unit that can be drawn from a released lot, sampled, tested and traced, so it is the smallest order we quote. ## Why the minimum is 1 kg The floor is set by traceability rather than by packing convenience. A manufacturer releases material in lots, and a lot carries one test record, one certificate and one retained sample. Filling a 1 kg pouch from that lot keeps the chain intact; filling a jar from a bench bin does not, because the jar has no lot behind it. One kilogram also covers the work that comes before a drum: a bench batch, a small pilot run and usually a second identity test, all from a single lot number. If the trial succeeds, the order moves to the 25 kg pack on the same specification; if it fails, the buyer has used a kilogram rather than a pallet. The 25 kg drum is the bulk unit and it reduces handling per kilogram, but it commits inventory and a longer storage period for a light-sensitive powder. The minimum is a pack decision, not a volume incentive, and a buyer who needs less than a kilogram is asking for a split rather than for the catalog pack. ## Packs and what each one protects Standard PABA packs | Pack | Net weight | Typical use | What to specify | Foil pouch | 1 kg | Trial, sample, small batch | Light barrier, sealed seam, reseal after opening | Fiber drum | 25 kg | Production | Food-grade liner, closed lid, lot code on drum and liner | Granulated powder | 1 kg or 25 kg on request | Blends, tableting, dust control | Particle profile and flow, quoted separately A pack is a barrier, and for this material it is two barriers at once. The foil keeps the light out and the moisture out; the seam is the weak point on a pouch and the liner is the weak point in a drum. “25 kg fiber drum” alone says nothing about either, so the liner, the lid and the storage condition belong in the order, not in a conversation afterwards. Granulation is a different specification, not a packing choice. It changes the flow, the dust and the bulk behaviour, and it can change the sieve result; the assay gate stays where it was. Say so at enquiry, because the finishing run sits inside the lead time. ## Lead time and dispatch The 1–7 day window starts when the order is complete, not when the first message arrives. It covers picking, document preparation, release checks and dispatch; it does not cover freight transit, customs clearance or the buyer's own quality release. A granulated grade or a non-standard pack adds time, and the quotation should state it as a separate line. Ask for the dispatch date as well as the lead time. A 25 kg drum may move on a pallet and a 1 kg pouch may move as a parcel, and the trade term decides who books the freight and who clears the entry. The documents should travel with the lot rather than follow it a week later. ## What a quotation needs Six inputs make a quotation specific enough to compare: - The material: para-aminobenzoic acid, CAS 150-13-0, not the family name alone. - The specification: assay and basis, loss on drying, pH, metals, microbiology and mesh. - The quantity and pack: kilograms, pouch or drum, standard or granulated. - The destination and trade term, since both decide the documents and the freight. - The document set: COA, technical data sheet, safety data sheet and any market statement. - The intended use and market, because a cosmetic file and a supplement file are different documents. A quotation without the intended use is incomplete. The same powder can be the right material for a cosmetic formula and the wrong one for a capsule, and the paperwork follows the use. Commercial terms are not published on this page; they are stated on the quotation. ## The sample is a lot, not a demonstration The 1 kg pouch is the qualification sample. Test identity, assay, loss on drying, pH and microbiology before scaling, and keep a retained portion from the same pack. The lot code on the sample, the certificate and the quotation should match, because a sample that cannot be traced to a lot is a demonstration rather than a qualification. Store the sample in the dark as the label says. This is a light-sensitive powder, and a sample left on a windowsill for a month will not represent the drum it came from. If the project needs less than a kilogram for a bench trial, raise it before ordering: a split from a bulk lot is a repack with its own traceability and should be documented as one. ## Terms to settle before the first order The quotation sets the commercial terms, the pack, the lead time and the documents. The quality terms belong beside them: the specification revision, the certificate per lot, the retained sample, the retest period and the change-control route. A written quality agreement is worth having before the first production order rather than after the first disputed result. Returns and replacements follow the quotation and that agreement. A lot that fails the agreed specification is handled through the retained sample and a joint re-test, not through a photograph of the powder. Agree in advance which laboratory is acceptable to both sides and who carries the referee test. The product hub carries the catalog specification; the COA page lists the release tests; the MOQ glossary entry defines the term; the logistics page covers shipping and documents; the quality page describes the release file. ### 05 The regulatory file for PABA URL: https://nutrition.rainwoodbio.com/products/vitamins/paba/compliance/ Reviewed: 2026-11-19 PABA sits at the edge of three regulatory worlds: a food-supplement ingredient, a cosmetic ultraviolet filter and an industrial chemical. Which instrument applies depends on the product category and the market, not on the certificate. This page names the frameworks and the documents; the buyer's regulatory team confirms the route for the destination before the first order. In one linePABA is not a vitamin, so the vitamin annexes do not describe it, and the route, the limit and the label are confirmed per market and per product category. ## The four checks The first check is the category: is the material going into a food supplement, a cosmetic or a food, because the same powder carries a different file in each. The second is the permitted status of the substance in that category and market. The third is the contaminant limit on the product as sold. The fourth is the label and the claim, which are reviewed separately from the certificate. A supplier can support checks two and three with documents; checks one and four belong to the brand and its regulatory reviewer. A file that answers only the certificate question has not answered the market question. ## European Union Directive 2002/46/EC sets the framework for food supplements and its Annex I lists the vitamins and minerals that may be used. PABA is neither a vitamin nor a mineral, so those annexes do not describe it, and the colloquial “vitamin B10” does not change that. Whether a non-vitamin substance may be used, and at what level, is handled through national rules and the general food law, so the answer can differ between Member States; the buyer confirms the position for the destination. Regulation (EU) 2015/2283 governs novel foods, and the status of the substance is checked against that framework and its history of use before a supplement is placed on the market. Labelling follows Regulation (EU) No 1169/2011 and the supplement particulars in the Directive. For cosmetics, Regulation (EC) No 1223/2009 is the instrument. Its Annex VI lists ultraviolet filters with a maximum concentration in the finished product; 4-aminobenzoic acid appears there with a 5% ceiling as of this review, and the buyer's regulatory team confirms the current consolidated text before relying on it. A cosmetic also needs a responsible person, a product information file and a notification, none of which the ingredient certificate supplies. ## United States In a dietary supplement, PABA is used as a dietary ingredient under DSHEA. The file should state the basis the supplier relies on and the buyer confirms that it covers the finished product; identity testing of each incoming component is required under the cGMP rule in 21 CFR 111. The Supplement Facts panel follows 21 CFR 101.36, and because PABA has no Daily Value, the panel carries the amount and not a percentage. In an over-the-counter sunscreen, a different instrument applies. 21 CFR 352.10(a) lists aminobenzoic acid as a sunscreen active ingredient at up to 15%, and the monograph has been under review for several years, so the current text decides whether that listing can still be used for a new product. A supplement filing and a sunscreen filing are separate routes for the same molecule. ## Contaminants and the finished-product calculation The catalog carries its own material limits: Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg on the powder. Those are ingredient gates. The product limit applies to the supplement as sold, after the PABA is diluted by excipients and divided into portions, and the two have to be checked together. Element limits to confirm for a food supplement | Element | European Union | United States | United Kingdom | Lead (Pb) | 3.0 mg/kg in the supplement | No federal maximum specific to supplements | Retained limit; check current law | Cadmium (Cd) | 1.0 mg/kg in the supplement | No federal maximum specific to supplements | Retained limit; check current law | Mercury (Hg) | 0.10 mg/kg in the supplement | No federal maximum specific to supplements | Retained limit; check current law | Arsenic (As) | Not harmonised; national rules may apply | No federal maximum specific to supplements | No harmonised limit; set one in the specification The EU figures come from Regulation (EU) 2023/915 as this review reads it, and the annex should be re-read when the destination or the product category changes. In the United States a state framework such as California's Proposition 65 can set an exposure threshold that a mg/kg figure alone does not answer. ## Labels and claims Permission to use an ingredient is not permission to make a claim. In the EU, health claims are authorised by Regulation (EC) No 1924/2006 and appear in the register established under Regulation (EU) No 432/2012; only the authorised wording may be used, and the buyer checks whether any entry applies. In the United States, a structure or function statement is the brand's responsibility, must be substantiated and carries the DSHEA disclaimer. In Great Britain the GB register of nutrition and health claims lists the permitted wording. This site makes no health claim for PABA. It publishes the specification, the methods and the framework; the claim, if there is one, belongs to the brand and to the market that allows it. In a cosmetic, sun protection factor is measured on the finished formula and is not a property of the powder. ## The document pack - Batch certificate with assay, infrared and HPLC identity, loss on drying, pH, metals and microbiology. - Specification and technical data sheet naming the free acid, the CAS number and the assay basis. - Safety data sheet with the standard sixteen sections. - Contaminant report against the destination limits, with an arsenic limit where one is set. - Allergen, genetically modified organism, origin and residual-solvent statements. - For a cosmetic use, the ultraviolet-filter listing reference and the finished-product concentration calculation. ## Checklist before the first order - The category is fixed: supplement, cosmetic or food, and the market is named. - The substance name and CAS number match on the specification, the certificate and the label. - The non-vitamin status is understood, and no nutrient reference value is claimed. - The contaminant results are converted to the finished-product portion. - The claim, if any, has been reviewed for the destination. - The pack, the storage condition and the change-control route are agreed. The catalog specification is on the PABA product page; the certificate is explained on the COA page; the identity tests are on the identity page. The quality page describes the release file, the EU regulatory notes carry the framework references, and the niacinamide page shows what a vitamin form file looks like by comparison. ### 06 How we prove a PABA lot is the free acid URL: https://nutrition.rainwoodbio.com/products/vitamins/paba/identity/ Reviewed: 2026-11-19 A PABA lot is the free acid when five lines agree: the document names para-aminobenzoic acid and CAS 150-13-0, infrared shows the carboxylic acid and the primary amine, HPLC retention and the ultraviolet spectrum match the reference, the nitrogen figure is close to 10.2%, and assay plus loss on drying close the mass balance. No single line carries that conclusion. An assay percentage on its own cannot separate the acid from an ester, from an isomer or from a dilution. In one lineIdentity is five agreeing measurements: the acid in the infrared, the retention in the chromatogram, the nitrogen near 10.2% and a mass balance that closes. ## The identity layers A certificate can name the right material and still fail to prove it. Each layer below answers a separate question, and a supplier who answers only the first has described the paperwork rather than the powder. Five layers of PABA free-acid identity | Layer | Question | Test | What it proves | Document | Is the substance named? | Name, CAS number, formula | Paperwork only | Infrared | Are the acid and the amine present? | Infrared spectrum against a reference | The functional groups | Chromatography | Is the peak PABA and not an isomer? | HPLC retention and ultraviolet spectrum | The molecule | Nitrogen | Is the mass fraction right? | Nitrogen by Dumas or Kjeldahl | Freedom from ester and dilution | Mass balance | Do the numbers agree? | Assay, loss on drying, related substances | Consistency of the lot ## The nitrogen ratio: the stoichiometric check PABA contains one nitrogen in a molecule of 137.14, so the theoretical nitrogen content is 14.007 ÷ 137.14 = 10.21%. The methyl ester carries the same nitrogen in a heavier molecule, which gives 9.27%; the ethyl ester gives 8.48%; octyl dimethyl PABA gives about 5.05%. The figure falls as the alkyl group grows, and it also falls when the powder is cut with a nitrogen-free carrier. That is why nitrogen is a useful counter-check on an assay. A lot that reads 99.4% by HPLC but 8.9% nitrogen has a mass fraction that does not match the free acid, and a dilution with lactose or a partial substitution with an ester explains both numbers at once. Nitrogen is not on the routine catalog specification, so request it when a source is new or a result is disputed. The method matters less than the reference. Dumas combustion and Kjeldahl both work; what the report needs is the method, the sample weight and the result to two decimal places. A nitrogen figure quoted without its method is a number without a pedigree. ## X-ray diffraction: the solid-state check X-ray diffraction asks whether the solid is crystalline and whether the pattern matches a reference. PABA is a crystalline solid that melts near 187–189 °C, so a genuine lot gives sharp reflections; a solid dispersion or a heavily processed dilution gives a different pattern, and a lot from a second source can be compared without any chemical assumption. Diffraction does not measure purity and does not see the counter-ion, so it is not a release test on this specification. Ask for the reference pattern and the detection limit before reading a “match” statement, because a reported conformity without the trace or the reference adds very little. For a disputed lot, diffraction plus infrared plus nitrogen is stronger than any one of them. Diffraction speaks to the solid form, infrared to the functional groups and nitrogen to the mass fraction; a substitution has to survive all three. ## What adulteration looks like Common substitutions and the signals | Substitution | What it changes | Signal | Test | Ortho or meta isomer | Same formula, different geometry | Retention shift; different infrared fingerprint | HPLC against isomer standards, infrared | Methyl or ethyl ester | No acid proton; higher molecular weight | Nitrogen below 10.2%; pH near neutral | Nitrogen, pH, infrared, hydrolysis | Carrier dilution | Lowers the assay per gram | Assay low and nitrogen low in proportion | Mass balance, nitrogen | Moisture | Raises loss on drying; lowers the as-received assay | Loss on drying above 0.5% | Loss on drying, dried-basis assay | Dye | Copies a cream colour | Colour without a spectral match | Ultraviolet spectrum, infrared Colour is the weakest signal and the easiest to fake. White to off-white covers a wide range, and a yellow cast can come from light exposure as easily as from an adulterant. The stronger signals are the infrared fingerprint, the retention time against isomer standards and the nitrogen figure. ## How to write identity into the specification - “para-Aminobenzoic acid, CAS 150-13-0, C7H7NO2.” - “Assay 99.0–101.0% by HPLC as received; loss on drying ≤0.5%.” - “Identification by infrared and by HPLC retention and ultraviolet spectrum; both reported.” - “pH of a 1% suspension 3.0–4.5, as a supporting check on the free acid.” - “Nitrogen 10.2% ± 0.3 where the mass fraction is to be confirmed.” - “No ester and no isomer above the agreed limit; particle size ≥95% through 40 mesh.” ## Five questions for the supplier - Which substance and CAS number are on the certificate, and is it the free acid? - Can you send the infrared spectrum and the HPLC chromatogram, not only the assay percentage? - What is the pH of a 1% suspension for this lot, and what does it suggest about the form? - What is the nitrogen result, and which method produced it? - If the lot is disputed, will you accept a joint re-test on the retained sample? Five direct answers amount to an identity file. A single assay percentage does not. The product hub carries the catalog numbers; the COA page shows where each figure sits on the certificate; the grade page sets out the materials that share the name; the ester comparison covers the substitution that matters most; the infrared method note explains the spectrum, and the method library indexes the rest. ### 01 Reading a calcium pantothenate COA: assay, calcium and rotation URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-b5/coa/ Reviewed: 2026-11-19 A calcium D-pantothenate COA is a lot-level test report, not a restatement of the catalog. It should show the IR and HPLC identity, the HPLC assay calculated on the dried material, the calcium titration, the specific rotation, moisture, the elemental and microbiological screens, and the 40 mesh result. Each item needs a method and a limit, and the result has to be a number rather than the limit copied across. In one lineThe assay and the rotation are reported on the dried basis, and the calcium figure has to agree with them before the lot is released. ## The rows that make the report auditable Three fields per row are enough to audit a certificate: the test, the technique, and the acceptance limit. The result sits in a fourth column. A certificate that prints the specification range in the result column has told the reader what was required, not what was found. For this material, the identity rows do more work than the assay. IR and HPLC show the pantothenate molecule; calcium and rotation show that the molecule is present as the D-calcium salt. A report that names only “vitamin B5” leaves both questions open. Routine tests on a calcium D-pantothenate certificate | Test | Technique | Limit | Appearance | Visual | White powder | Identification | IR and HPLC against the reference | Match | Assay, dried basis | HPLC | 98.0–101.0% | Calcium | Complexometric titration | 8.0–8.6% | Specific rotation | Polarimetry after drying | +25.0° to +28.5° | Moisture | Loss on drying, gravimetric | ≤5.0% | Elemental screen | ICP-MS | Pb 3 · As 2 · Cd 1 · Hg 0.1 mg/kg | Micro screen | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh ## Dried basis and the two conversion directions The assay is a dried-basis figure. The bench result is divided by the dry matter, so the moisture result is part of the assay, not an accessory. If the powder reads 95.0% as-is and loses 3.0% on drying, the dried figure is 97.9%. A 98.0% dried result at 4.0% moisture is 94.1% of the powder the production line weighs. Rotation is measured on the dried material too. The calcium result should say whether it is as-is or dried; without that word the number cannot be compared with the assay. The ratio of calcium to assay is a quick consistency check: 100% assay corresponds to 8.41% calcium, so the ratio sits near 0.084. A certificate showing 8.6% calcium beside 98.0% assay has two numbers that do not belong to the same pure salt. That check is not a replacement for the assay. It is a way to catch a transcription error, a blend or a different salt before the lot is used. Ask for the raw values and the calculation, not only the pass statement. ## Where the limit ends and the result begins The acceptance limit is the boundary the lot had to meet. The result is the value the laboratory obtained. A report that uses the limit as the result has collapsed the two columns and removed the evidence. The reader should be able to see both and reach the release decision without guessing. What a lot-specific result should look like | Test | Limit | What a result looks like | Assay | 98.0–101.0% dried | A percentage plus the HPLC method and the loss on drying | Calcium | 8.0–8.6% | A percentage, the titration method and the basis | Rotation | +25.0° to +28.5° dry | The measured angle, temperature and cell path | Moisture | ≤5.0% | A percentage from the gravimetric test | Elemental screen | Each element | A separate mg/kg figure for Pb, As, Cd and Hg | Micro screen | Count and absence | The colony count plus the absence statement “Conforms” has its place for identity, where the result is a comparison with a reference. It has no place in the assay, calcium or moisture rows, where a number exists. For the elemental screen, a single total hides which metal was high. For micro, the count and the absence statement are two results and both belong on the page. ## What changes from lot to lot Crystallisation moves the assay, the rotation and the calcium figure together; the dryer moves the moisture result; the mill and the sieve move the 40 mesh figure. A new sieve can change that last line while the chemistry is unchanged. Bulk density and flow are not in the catalog; if the process needs them, they become additional agreed lines. Colour is a poor test. White to off-white is broad enough to cover a normal crystallisation batch, and a cream tint can still pass. A noticeably damp or dark sample should trigger a moisture test, not a rejection based on a photograph. Trends across certificates say more than one result near an edge: falling assay, rising moisture, or rotation sitting at the bottom of the window. The lot code is the link between the paper and the pack. It should appear on the certificate, the pouch or drum, and the retained sample. If the three do not agree, the certificate belongs to a different lot. ## When to use an outside laboratory An independent test earns its place for a new source, a first shipment into a regulated market, a disputed form, or a claim the supplier's certificate does not support. The panel should include IR, HPLC assay, calcium by ICP-OES or titration, specific rotation, loss on drying, the elemental screen and microbiology. Add a chiral method when the rotation is low or the material may be racemic. Residual solvents are worth adding when the route uses an alcohol or another solvent that the catalog does not cover. Ask each laboratory for its detection limit; a “not detected” line without a limit describes the method, not the sample. Keep the tested sample and the retained sample from the same lot, and name the lot on the report. ## Six lines for a supplier comparison Compare form and CAS number; assay and basis; calcium; specific rotation; loss on drying; elemental, microbiological and 40 mesh results. Two certificates that agree on assay but differ on rotation or calcium are not describing the same powder. Then look at traceability: who made the lot, which route and drying step were used, and which mill and sieve produced the powder. The catalog values are on the vitamin B5 product page. The form tests are explained on the identity page; market documents are on the compliance page; the assay technique is covered in the methods library; the release sequence is on the quality page. ### 02 Calcium pantothenate grades: powder, granulation and dilution URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-b5/grades/ Reviewed: 2026-11-19 Vitamin B5 is bought as calcium D-pantothenate powder, normally specified at 40 mesh, with granulation available on request. The grade choices that matter in a supplement line are physical — particle size, granulation and dilution — plus the salt form itself. The chemistry is fixed by the monograph; the grade changes flow, dust, blend uniformity and the label. In one lineThe grade decision is mostly physical: mesh, granulation and dilution change the flow, the blend uniformity and the label, not the chemistry. ## Why one name covers several grades “Vitamin B5” is a label name, not a specification. The commercial material is calcium D-pantothenate, a white powder with a defined assay, calcium figure and rotation. A buyer can meet the same name on a 40 mesh powder, a granulated powder, a diluted premix, the sodium salt or a liquid panthenol, and those are not interchangeable. The form and the physical grade both belong in the purchase order. This range supplies the standard 40 mesh powder and a granulated powder on request. The other lines below are forms a buyer may meet in the market; they are listed so that a quotation can be read, not because they can be substituted without a new specification. ## The grade families side by side Calcium pantothenate grade families and what changes | Grade | Form | Typical use | What changes | Standard powder | White powder, ≥95% through 40 mesh | Capsules, tablets, dry blends | Baseline flow and dust | Granulated | Agglomerated powder, on request | High-speed tableting, stick packs | Flow, bulk density, dispersion | Diluted premix | Calcium pantothenate on a carrier | Low-dose blends | Assay per gram, carrier, label | Sodium pantothenate | Sodium salt, powder | Where calcium is not wanted | Counter-ion, label, hygroscopicity | D-panthenol | Liquid alcohol | Liquid formats | Not a powder; different label name | Free acid | Viscous oil | Special handling | Not a drop-in; stability The first two rows are the grades in this range. The last four are different materials or different specifications, and each one moves a line on the certificate. A granulated powder still has to meet the same assay, calcium and rotation; a diluted premix does not, because the carrier changes the assay per gram and the label. ## Particle size, flow and dust 40 mesh is a finishing specification: at least 95% of the powder passes a 40 mesh sieve. The number tells the buyer about the coarse fraction, not the whole particle-size distribution. A powder that passes 40 mesh can still contain a lot of fines, and fines are what segregate, dust and stick to a capsule shell. Granulation binds the fines into larger particles. The result is usually better flow, less dust and a more stable bulk density, but it can slow dispersion in a stick pack and it adds a different particle-size line on the certificate. Bulk density and flow are not on the catalog specification; they can be agreed as additional lines when the dosage form needs them. The test method matters. A sieve result depends on the sieve, the shaking time and the sample size; a laser diffraction result gives a distribution that a sieve result does not. Ask which method produced the number before comparing two suppliers; the methods library describes both approaches. ## The dose decides the grade A capsule or tablet that carries 5–10 mg of pantothenic acid takes a small amount of powder in a large fill. Straight calcium pantothenate at that dose is a minor fraction of the blend, and a minor fraction is where segregation and uneven mixing show up. A diluted premix can improve uniformity, but it adds a carrier, lowers the assay per gram and changes the label. A high-dose tablet or stick pack takes the straight powder. The fill weight is dominated by the ingredient, the flow and the dust matter more than the dilution, and the calcium from the salt becomes a visible part of the calcium figure. At 500 mg pantothenic acid, the salt contributes about 46 mg calcium, which is no longer a rounding error on a label. The dosage form also sets the particle size. A direct-compression tablet wants flow and a coarse fraction; a hard capsule can take a finer powder; a stick pack wants a powder that disperses without lumps. Decide the form before the grade, not after the quotation. ## What to write into the specification - “Calcium D-pantothenate, CAS 137-08-6, C18H32CaN2O10.” - “Assay 98.0–101.0% on the dried basis by HPLC; loss on drying ≤5.0%.” - “Calcium 8.0–8.6% by complexometric titration; specific rotation +25.0° to +28.5° on the dried basis.” - “Identification by IR and HPLC; particle size ≥95% through 40 mesh.” - “Granulation, bulk density or flow only if agreed in writing.” - “Pack, retest period and destination market stated on the order.” A specification that names only “vitamin B5” has not named the form, the grade or the basis. The product page carries the catalog values; the level-four comparison covers the salt and the label; the choline page shows how a different vitamin handles its own salt form and label; the quality page describes how the grade is released. ## When a different grade is the wrong choice If the formula is a ready-to-use liquid, the calcium salt is not the only option, and a liquid panthenol may be the market form; that is a different ingredient with a different label. If the label names pantothenic acid as the ingredient rather than the salt, the calcium salt is not a drop-in without a conversion and a label review. If the process needs a very fine powder for a coating or a suspension, a 40 mesh powder may be too coarse, and the mill has to be part of the agreement. The reverse is also true: a granulated grade is not a substitute for the standard powder in every process. It is a different physical specification, and it should be chosen because the process needs flow or dust control, not because it sounds more finished. ### 02.1 Calcium pantothenate vs pantothenic acid: the salt, the calcium and the label URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-b5/grades/calcium-pantothenate-vs-pantothenic-acid/ Reviewed: 2026-11-19 Calcium pantothenate is the calcium salt of D-pantothenic acid and the solid form used in capsules, tablets and dry blends. The free acid is a viscous, hygroscopic material that is difficult to handle as a powder, while the salt is a white crystalline powder, freely soluble in water and specified at 8.0–8.6% calcium. The nutrition label declares pantothenic acid, but the ingredient list names the salt, so the conversion factor, the calcium figure and the label wording all have to agree. In one lineThe calcium salt is the practical solid, but the label declares pantothenic acid; the salt name, the calcium figure and the conversion belong in the specification. ## Two names, two identities Calcium pantothenate and pantothenic acid are related but not interchangeable. The salt carries two pantothenate anions for each calcium ion; the free acid carries the acid protons instead. That difference gives each material its own CAS number, molecular weight, certificate and label name. Calcium D-pantothenate against D-pantothenic acid | Property | Calcium D-pantothenate | D-Pantothenic acid | CAS number | 137-08-6 | 79-83-4 | Formula | C18H32CaN2O10 | C9H17NO5 | Molecular weight | 476.53 | 219.23 | Calcium | 8.0–8.6% (catalog) | None | Form | White powder | Viscous oil | Solubility | Freely soluble in water | Water-soluble, handled as a liquid | Label name | Calcium D-pantothenate | Pantothenic acid The molecular weights are the key to the arithmetic. The salt contains two pantothenic acid units, so 476.53 g of salt carries 438.46 g of pantothenic acid, or about 92.0% by mass. The free acid is the reference molecule, but it is not the practical solid for a capsule, a tablet or a dry blend. ## The conversion between the two At 100% assay, 100 mg calcium pantothenate delivers 92.0 mg pantothenic acid. The reverse factor is 1.087: 10 mg pantothenic acid needs 10.87 mg calcium pantothenate before any assay or moisture correction. A label that declares 10 mg calcium pantothenate is declaring 9.20 mg pantothenic acid, not 10 mg. The assay basis is a second correction. A lot at 99.0% on the dried basis with 3.0% loss on drying is about 96.0% of the powder as weighed, so the weigh-up for 10.87 mg of pure salt becomes 11.32 mg of powder. The two corrections are separate: the salt factor changes the molecule, the moisture factor changes the mass on the balance. A common label error is to apply one correction and not the other. Write the basis on the specification and show the conversion in the batch record, so that the label, the weigh-up and the certificate use the same number. ## Why the calcium figure matters Calcium is not a filler in this material; it is the counter-ion that makes the salt. At 100% assay the salt contains 8.41% calcium, and the catalog range of 8.0–8.6% is set around that figure. The calcium result is therefore a direct check on the form, and it should be read against the assay rather than on its own. The ratio is the useful number. Divide the calcium percentage by the assay percentage on the same basis: a pure salt sits near 0.084. A high ratio points to a calcium-rich diluent or a different calcium salt; a low ratio points to sodium pantothenate, the free acid or a dilution. Each window can be met on its own while the ratio fails. The calcium also reaches the label. A 500 mg pantothenic acid serving carries about 46 mg calcium from the salt. That is small against a daily calcium reference, but it is not zero, and a high-dose B-complex with several servings can make the calcium line worth checking. ## What the label has to say The nutrition panel declares pantothenic acid, not calcium pantothenate. In the EU, Regulation (EU) No 1169/2011 sets the reference intake at 6 mg and the declaration uses the name “pantothenic acid”; in the US, the Supplement Facts panel uses “Pantothenic Acid” with a daily value of 5 mg. “Vitamin B5” is a synonym, not the nutrient name on the panel. The ingredient list is where the salt appears. It should say “calcium D-pantothenate” or “calcium pantothenate”, not only “vitamin B5”, because the salt is what was weighed. If the formula uses the free acid, the ingredient list and the nutrition panel no longer describe the same material in the same way, and the market file has to be checked. The EU food-supplement directive, 2002/46/EC, lists the pantothenic acid forms in its Annex I; as of this review it names the calcium and sodium D-pantothenates, dexpanthenol and pantethine, and the free acid does not appear as a separate entry. That list is the reference the buyer checks, and the buyer's regulatory team confirms what it means for the destination and checks the current text. ## What to write into the specification - “Calcium D-pantothenate, CAS 137-08-6, C18H32CaN2O10.” - “Assay 98.0–101.0% on the dried basis by HPLC; loss on drying ≤5.0%.” - “Calcium 8.0–8.6% by complexometric titration; state the basis.” - “Specific rotation +25.0° to +28.5° on the dried basis.” - “Label basis: pantothenic acid, with the salt factor 0.920 and the assay basis stated.” - “Destination market and the form named in the market file confirmed before the order.” A specification that stops at “vitamin B5 99%” has not named the form, the calcium or the label basis. The product hub carries the catalog values; the COA page shows where the calcium and rotation sit on the certificate; the compliance page sets out the market documents. ## When the salt is the practical choice Choose calcium pantothenate for capsules, tablets, powder sticks and dry blends. It is a solid, it dissolves freely, it has a defined calcium figure and a rotation that can be checked, and it is the form the catalog and the certificate describe. For a liquid format, the formulator may prefer a liquid panthenol, but that is a different ingredient and a different label. Choose the free acid only when the formula or the label calls for it and the market file covers it. It is not a drop-in: the mass changes, the handling changes, the stability changes and the label citation changes. A switch in either direction needs a written change control, a new specification and a label review. The grades page places this comparison in the wider range; the identity page gives the tests that separate the forms; the choline page shows how another vitamin in the same category handles its salt and label; the quality page describes the release file behind the certificate. ### 03 Calcium pantothenate is hygroscopic: the pack and the solution set the shelf life URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-b5/stability/ Reviewed: 2026-11-19 Calcium pantothenate is hygroscopic and hydrolyses in water, so the powder and the solution fail for different reasons. The sealed foil pouch protects the powder from moisture; a solution needs a controlled pH, a low heat load and a validated hold. The shelf life is assigned from stability data for the exact pack and matrix, not from the certificate. In one lineCalcium pantothenate fails through moisture and hydrolysis, so the sealed pack and the solution pH decide the shelf life, not the certificate. ## The powder: moisture is the variable The catalog sets loss on drying at ≤5.0%. That is a release gate, not a storage allowance. Once the pouch is opened, the powder picks up moisture from the air; the loss on drying rises, the as-is assay falls and the powder can cake. A tight seal, a dry store and a short in-use period do more for the material than a desiccant added after the fact. The practical risks are humidity, a hot loading bay and a container that is opened and closed many times. Keep the powder in its original closed pack, or transfer the remainder to a smaller airtight container. Allow a cold pack to equilibrate before opening so that condensation does not form on the powder. Loss on drying is also the bridge to the assay. A powder that has picked up 2% moisture reads about 2% lower on an as-is basis while the dried-basis result may still pass. The certificate should be read with the moisture result, and the opened pack should be re-tested before a long production run. ## The solution: hydrolysis and pH Calcium pantothenate dissolves freely in water. In solution, the amide bond between pantoic acid and β-alanine can hydrolyse, and the rate rises with heat and with pH away from the near-neutral range. The stability optimum is usually quoted around pH 5.5–7; a strongly acidic or strongly alkaline matrix is the wrong place for a long hold. A ready-to-drink process adds a heat load through pasteurisation, hot fill or sterilisation. A powder stick avoids that step because the consumer adds water at the point of use. If a liquid is unavoidable, control the pH, keep the heat load short, validate the hold time and protect the solution from microbial growth. ## What drives degradation Factors that move calcium pantothenate during storage | Factor | What it does | Control | Moisture | Raises loss on drying; lowers the as-is assay; causes caking | Sealed pack; dry store; short in-use period | Heat | Accelerates hydrolysis in solution and moisture pickup in powder | Controlled store; cool process | Acidic pH | Hydrolysis of the amide bond | Buffer near the stability range; validate | Alkaline pH | Hydrolysis and colour change | Avoid; validate the matrix | Microbial load | Growth in an aqueous hold | Preservative or validated hold; hygiene | Time | All of the above accumulate | Assign a retest period from data These factors are not independent. A warm, acidic beverage held for a long time is a different risk from a sealed powder in a dry store, even though the certificate for the drum is the same. The useful stability question is not “is calcium pantothenate stable?” but “stable in which pack, at which condition, for how long?” ## A stability protocol for the ingredient A useful protocol states the pack, the storage condition, the time points and the tests. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% relative humidity cover the warehouse; accelerated storage at 40 °C/75% relative humidity stresses the pack. For a solution, add an arm at the process pH and the process heat load. Test assay, loss on drying, calcium, specific rotation, appearance and microbiology at each point. The rotation is worth keeping in the panel because degradation can move it while the assay is still inside the window. The report should show the individual results and identify the pack and the lot family. Ask for the stability summary for the pack you will buy, not for a different pack from the same product family. A 25 kg drum and a 1 kg pouch have different surface-to-volume ratios, different headspace and different opening histories; the data belongs to the pack. ## The finished formula changes the answer A capsule or tablet has low water activity, but the shell and the excipients can still transfer moisture. Check loss on drying at release and after storage, and check the fill for caking. A stick pack depends on the seal and the foil; a pinhole is a failure, and the strip should be inspected, not only the powder. A beverage combines pH, heat and time. The bulk stability result is the starting point, not the answer. A gummy adds a low-water matrix, a heat process and a pH of its own; the ingredient's powder data does not transfer. The formulator decides whether an overage is needed; that is a label and stability decision, and it does not repair a pack that lets moisture in. ## How the shelf life is set We do not publish a single shelf-life number for calcium pantothenate, because the pack, the storage condition and the matrix set it. The assigned retest period belongs on the specification and is supported by the stability file for that pack. A number without a pack, a condition and a test panel is not a shelf life; it is a claim. After the retest period, re-assay the retained sample before extending use. Do not extend by assumption, and do not carry a bulk figure across to a repacked container. The product hub lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the methods library describes the assay; the quality page describes the release workflow. ### 04 Calcium pantothenate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-b5/moq/ Reviewed: 2026-11-19 The MOQ for calcium pantothenate is 1 kg, supplied as a 1 kg foil pouch; the bulk pack is a 25 kg fiber drum. Lead time is 1–7 days for the standard pack. A firm quotation needs the form and CAS number, the specification, the quantity and pack, the destination and Incoterm, the documents and the intended use. In one lineThe 1 kg pouch is the commercial unit: it covers a trial, a retained sample and an independent test, and it keeps the lot traceable. ## Why the minimum is 1 kg One kilogram covers a bench trial, a retained sample and an independent test. It is also small enough to ship as a parcel, which matters when a formulator needs material before the production plan is fixed. The pack carries a lot code and a certificate; it is a commercial unit, not a scoop from a bulk drum. Below 1 kg, the material is usually split from a larger lot and repacked. That adds handling, loses the original pack identity and makes traceability harder without changing the chemistry. The 25 kg drum is the bulk unit: it reduces handling per kilogram, but it commits inventory and a longer storage period. The minimum is a pack decision, not a volume incentive. ## Packs and formats Standard calcium pantothenate packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Particle profile changes | Diluted premix | On request | Low-dose blends | Carrier and label change The catalog form is a 40 mesh powder: ≥95% through 40 mesh. Granulation or dilution is a different specification, not a packing choice. If the dosage form needs a coarser or freer-flowing powder, say so before the quotation, because the change moves the particle-size line and may move the lead time. ## Lead time and dispatch The standard pack is quoted at 1–7 days from order confirmation. That window covers picking, document preparation and dispatch; it does not include shipping transit, customs clearance or the customer's own quality release. A custom granulation, a dilution or a non-standard pack adds time, and the quotation should state it separately. The date the goods leave the warehouse matters as much as the quoted lead time. The 1 kg pouch ships as a parcel and the 25 kg drum as a pallet load; freight booking and customs entry follow the Incoterm. The COA, specification and SDS should accompany the lot, because a certificate that follows the pallet leaves the importer unable to release the material. ## What a quotation needs Six items make a quotation firm enough to compare: - Product and form. Calcium D-pantothenate, CAS 137-08-6, with the salt and the grade written out. - Specification. Assay basis, calcium, rotation, loss on drying, particle size, heavy metals and microbiology. - Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated or diluted variant. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, specification, SDS, and any market-specific statement the importer needs. - Intended use and market. Supplement, food or another use, and the market where it will be sold. A quotation without the market and the grade is incomplete. The same powder can suit one destination and sit outside the file for another, and the paperwork is part of the offer. Commercial terms are stated on the quotation, not on this page. ## The sample is a lot, not a demonstration The 1 kg pack is the qualification sample. Test identity, assay, calcium, rotation, loss on drying and microbiology before scaling, and keep a retained sample from the same pack. The lot code on the sample, the COA and the quotation should match. A sample that cannot be traced to a lot is a demonstration, not a qualification. Small trial quantities are split from a bulk lot and repacked, with their own traceability record and pack identity rather than the catalog 1 kg pouch; ask before ordering. Test the calcium figure, rotation and loss on drying on the trial material itself, and do not assume that the bench sample and the 25 kg drum come from the same lot. ## Terms to settle before the first order Calcium pantothenate is quoted against the 1 kg foil pouch or the 25 kg fiber drum, with the trade term, the dispatch window, the documents and the commercial conditions on one side and the quality terms on the other: assay and calcium limits, the revision being sold, a certificate for each lot, a sample held back from it, the retest interval and how a process change is approved. A quality agreement before the first production order prevents the argument that follows a disputed assay. A return or replacement for calcium pantothenate follows the commercial terms in the quotation and the route in the quality agreement. When a lot misses the agreed assay, calcium or rotation, a sample from the lot and a joint re-test decide it, not a photograph of the powder. Name the referee laboratory and who pays for it before the first shipment; for a hygroscopic salt, the sample's storage history matters as much as the result. The product hub carries the catalog specification; the COA page lists the release tests; the compliance page covers the market files; the quality page describes the release file; the logistics page covers shipping and documents. ### 05 The regulatory file for calcium pantothenate URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-b5/compliance/ Reviewed: 2026-11-19 Calcium pantothenate is bought as a named salt, and the regulatory file is built around that form, the destination and the finished-product route. The buyer's regulatory team confirms the route. This page lists the framework, the limits and the documents that belong in the file, so the specification and the commercial pack can be reviewed together. In one lineThe file has to show which pantothenic acid form is being bought, how it is declared and which limits apply where it is sold. ## What the file contains A complete file answers four questions. What is the material, and which specification version is being bought? Which lot is being released, and what does its certificate report? Which limits and label rules apply to the finished product? And what changes if the source, the process or the pack changes? The certificate answers the lot question, the technical data sheet answers the specification question, and the safety data sheet answers the handling question. None of them answers the route question alone. The file should also hold the allergen and GMO statements, the origin record, the residual-solvent statement and any customer-specific declaration. Where a statement is not available for the lot, the gap should be named before the order, not discovered at the port. A document list with version numbers is more useful than a folder of undated PDFs. ## European Union The EU framework for food supplements is Directive 2002/46/EC; its Annex I is the vitamin list the buyer checks, and Regulation (EU) No 1169/2011 sets the nutrition-labelling rules. The reference intake for pantothenic acid is 6 mg, and the nutrition declaration uses that name. As of this review, the Annex I entries for pantothenic acid name the calcium and sodium D-pantothenates, dexpanthenol and pantethine; the buyer confirms that the form and the finished product fit the destination route and checks the current text. General food law, contaminant rules and labelling rules apply alongside the supplement framework. The file should carry the specification version, the lot certificate and the label artwork for the destination, not only a generic statement that the material is food grade. ## United States In the United States, calcium pantothenate is listed as a direct food substance affirmed as GRAS at 21 CFR 184.1212. That listing is a food-use reference, not a finished-product authorisation; the dietary-supplement route is separate, and the buyer confirms the basis for the ingredient and the finished product. The Supplement Facts panel declares pantothenic acid with a daily value of 5 mg as of this review. Label claims are reviewed separately from the certificate. A structure/function statement is checked on its own terms, and no disease-related claim belongs in the file; the brand's regulatory reviewer signs off the wording. The regulatory notes provide the framework references. ## Contaminants and limits The contaminant panel is a finished-product calculation, not only a drum result. The table is a starting point for a food-supplement file; the destination text and the daily dose decide the final limit. Contaminant limits to confirm for the finished product | Parameter | Typical supplement reference | What the file should show | Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method, limit and the finished-product calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception that applies | Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result and method | Arsenic (As) | Customer or market limit | The agreed limit and the method on the certificate The catalog heavy-metal limits are release gates for the powder; they are not automatically the finished-product limits. Convert with the dose and the serving size, and keep the calculation in the file. No tolerable upper intake level for pantothenic acid has been set in the EU or the US as of this review; that does not remove the need for a contaminant and label review. ## Nutrition and health claims A nutrition claim such as “contains pantothenic acid” needs a significant amount: in the EU, 15% of the reference intake per 100 g or 100 ml, or per portion where the package contains one portion, and 15% of the daily dose for a food supplement. The claim wording, the condition and the presentation are checked against the current rules. A health claim must use an authorised wording and meet its conditions of use. No disease-related claim belongs in the food file. The raw-material certificate does not approve a claim, and a claim does not change the specification. The brand's regulatory reviewer confirms the wording for the destination, the form and the finished product. ## Documents in the file - Specification with the version number, the form, the CAS number and the assay basis. - Batch COA with the methods, limits and results. - Technical data sheet and safety data sheet. - Allergen, GMO, origin and residual-solvent statements. - Heavy-metal and microbiology results for the lot. - Packaging specification and the change-control route. Each document should identify the product and the revision it belongs to. A certificate for one lot does not replace the specification, and a specification does not replace the certificate. The two are read together, with the label artwork for the destination. ## Checklist before the first order - The specification version, CAS number and exact salt form are named. - COA, TDS, SDS, allergen, GMO, origin and residual-solvent statements are on file. - The contaminant results are converted to the finished-product dose. - The label and the claim have been reviewed for the destination. - The source, process and pack are under change control. - The quotation, the specification and the certificate refer to the same version. The product page carries the catalog specification; the COA page explains the lot certificate; the identity page covers the analytical evidence; the quality page describes the release file; the regulatory notes provide the framework references. ### 06 How we prove a vitamin B5 lot is calcium D-pantothenate URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-b5/identity/ Reviewed: 2026-11-19 A calcium D-pantothenate lot is identified by measurements that have to agree: IR and HPLC against the reference, a specific rotation inside +25.0° to +28.5°, a calcium figure of 8.0–8.6%, and an assay of 98.0–101.0% on the dried basis. The rotation separates the D form from the racemic DL material, and the calcium separates the salt from the free acid or panthenol. The assay alone cannot do either job. In one lineThe IR and HPLC name the molecule, the rotation shows the D form and the calcium figure shows the salt; a lot needs all three to agree. ## The identity layers A certificate can name the right material and still fail to prove it. The layers below are separate questions, and each one needs its own evidence. A supplier who answers only the first has described the paperwork, not the powder. Layers of calcium D-pantothenate identity | Layer | Question | Test | What it proves | Document | Is the form named? | Name, CAS number, formula | Paperwork only | IR and HPLC | Is the molecule pantothenate? | IR spectrum and HPLC retention | The molecule, not the form | Specific rotation | Is it the D form? | Polarimetry on the dried basis | The configuration | Calcium | Is it the calcium salt? | Complexometric titration or ICP-OES | The counter-ion | Mass balance | Is it diluted? | Assay, loss on drying, impurities | Consistency of the numbers The layers are not alternatives. IR and HPLC can match the reference while the rotation falls outside the window, which points to the DL or L form. The rotation can be right while the calcium is low, which points to the free acid, the sodium salt or a dilution. The calcium can be right while the assay is low, which points to a calcium-rich diluent. ## The calcium ratio: proving the salt The salt carries one calcium ion for every two pantothenate anions. At 100% assay, the theoretical calcium content is 40.08 ÷ 476.53 = 8.41% by mass. A calcium result close to that figure, with an assay inside 98.0–101.0%, is consistent with calcium pantothenate. A low calcium figure points to sodium pantothenate, the free acid or a dilution; a high figure points to a calcium-rich diluent or a different calcium salt. The ratio is the check. Divide calcium by assay on the same basis: a pure salt sits near 0.084. A powder blended from calcium pantothenate and a calcium salt can land inside both windows while the ratio is wrong; so can a blend with sodium pantothenate. The certificate should report calcium and assay on the same basis, and the reader should do the division. Calcium by complexometric titration is the catalog method; ICP-OES is the independent check and also reports sodium, which is useful when a sodium salt is suspected. ## X-ray diffraction: the solid-state check X-ray diffraction answers a different question: is the solid crystalline, and does its pattern match a reference? Calcium pantothenate is a crystalline salt, so a diffraction pattern can show whether the solid is crystalline and whether the pattern matches a reference. It is not a purity assay, it does not measure the counter-ion, and it does not prove that an amorphous carrier is absent. Ask for the reference pattern and the detection limit before reading a “match” statement. XRD is not a routine release test for this product, and a certificate that reports “XRD conforms” without the pattern has added little. The method is most useful when the question is solid form or when a new source has to be compared with an existing one. ## What adulteration looks like Calcium pantothenate substitutions and the signals | Adulterant | What it is | Signal | Test | DL-calcium pantothenate | Racemic salt, not the D form | Rotation near zero or negative | Polarimetry, chiral HPLC | Free pantothenic acid | No calcium; viscous material | Calcium absent; form differs | Calcium, IR, HPLC | Panthenol | Alcohol, not the salt | No calcium; different IR and retention | IR, HPLC, calcium | Lactose or maltodextrin | Carrier or diluent | Assay low; LOD and IR differ | Mass balance, IR | Calcium salt diluent | Raises calcium without assay | Calcium/assay ratio high | Calcium, mass balance | Sodium pantothenate | Different counter-ion | Calcium low; sodium high | Calcium, sodium by ICP-OES Colour is the weakest signal: white to off-white covers a wide range, and a blend can match it. The stronger signals are the rotation, the calcium figure and the mass balance. A certificate that reports appearance and assay but not rotation or calcium has left the most likely substitution untested. ## How to write identity into the specification - “Calcium D-pantothenate, CAS 137-08-6, C18H32CaN2O10.” - “Assay 98.0–101.0% on the dried basis by HPLC; loss on drying ≤5.0%.” - “Identification by IR and HPLC against the reference.” - “Specific rotation +25.0° to +28.5° on the dried basis.” - “Calcium 8.0–8.6% by complexometric titration; report the basis.” - “No DL form or free acid above the agreed limit; state the limit in writing.” - “Particle size ≥95% through 40 mesh; heavy metals and microbiology as listed.” The specification should also name the pack and the retest period, because identity is checked on the retained sample as well as on the release sample. The product hub carries the catalog values; the COA page shows where each result sits on the certificate. ## Five questions for the supplier - Which form is this lot, and which CAS number is on the certificate? - Can you provide the IR spectrum and the HPLC chromatogram, not only the assay percentage? - What are the specific rotation and the calcium result for this lot, and on which basis? - What is the loss on drying, and how was the dried-basis assay calculated? - If the lot is disputed, will you accept a joint re-test on the retained sample? Five direct answers amount to an identity file. A single assay percentage does not. The grades page compares the forms; the level-four comparison covers the salt and the label; the methods library explains the separation; the quality page describes the retained sample and the release file. ### 01 What the COA for vitamin D2 actually contains URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-d2/coa/ Reviewed: 2026-11-19 The certificate for a vitamin D2 lot reports appearance, identification by HPLC and ultraviolet spectrum, assay by HPLC, melting range, loss on drying, the heavy-metal panel, microbiology and particle size. The assay only means ergocalciferol when the reference standard and the identity tests point to the same molecule. The limits below describe the catalog grade; only the batch certificate speaks for a particular pack. In one lineA vitamin D2 assay is only an ergocalciferol result when the reference standard, the ultraviolet identity and the melting range agree with it. ## The certificate as a test report A certificate earns its keep when a reader can audit it line by line. Each parameter needs its measured value, the method that produced it and the limit it was judged against. A row that says only “conforms” gives a verdict without the raw observation. The identity of vitamin D2 rests on more than one line. HPLC retention against an ergocalciferol standard names the peak; the ultraviolet spectrum shows the vitamin D chromophore; the melting range shows a crystalline sterol with the expected solid form. Any one of the three can be right while another is wrong. Identity, assay, moisture and contaminants · vitamin D2 | Parameter | Method | Release limit | Appearance | Visual | White crystalline powder | Identification | HPLC retention and UV spectrum; melting range | Conforms; 115–118 °C | Assay | HPLC with UV detection | 97.0–103.0% | Loss on drying | Gravimetric | ≤0.5% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh ## The assay basis, the standard and the IU arithmetic The assay is a percentage of the powder, and the certificate should state whether that percentage is on the as-is or the dried basis. The specification here allows loss on drying up to 0.5%, so the gap between the two figures is small but not zero: a lot at 97.0% as-is with 0.4% moisture calculates to 97.39% on the dried basis. Both numbers can be correct; they describe different denominators. The reference standard matters more than the basis. Ergocalciferol and cholecalciferol have similar ultraviolet spectra, with a maximum near 265 nm, and a method that reports “vitamin D” without naming the standard has not shown which molecule it measured. The certificate should name an ergocalciferol standard and state whether a cholecalciferol screen was run. The IU figure is a conversion, not a second assay. One microgram of either vitamin D form is assigned 40 IU, so 1 mg is 40,000 IU. A 99.0% powder therefore carries 990 mg of ergocalciferol per gram, or 39,600,000 IU/g. That arithmetic is a unit check on the certificate, not a dose, and it explains why this bulk material is diluted before it reaches a capsule. The melting range is a second identity line. The catalog range is 115–118 °C for ergocalciferol. A result outside that window can point to a different sterol, a solvate or an impurity that the assay does not see. ## Release limit versus batch result The release limit marks the boundary a lot must stay inside. The result belongs to the batch in hand. The certificate needs both, in separate columns, with the method named alongside. A result column that repeats the limits has copied the gate instead of recording a measurement. What the result column should contain | Parameter | Release limit | Result column | Assay | 97.0–103.0% on the stated basis | A measured percentage, with the basis and the reference standard | Identification | HPLC/UV conform; 115–118 °C | The retention time, the spectrum and the measured melting range | Loss on drying | ≤0.5% | A measured percentage | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot “Passes specification” is a conclusion. For heavy metals the evidence is a figure per element, not a single total; for microbiology it is a count plus an absence statement; for assay it is a measured percentage with the basis and the standard. A certificate that reports one “vitamin D” figure and no chromatogram has left the form untested. ## What moves between batches Vitamin D2 is made by ultraviolet irradiation of ergosterol, and the reaction produces a family of isomers. Previtamin D2, lumisterol and tachysterol are the usual companions, and the purification step decides how much survives. A batch can sit inside the assay range while its isomer profile moves. That is why the chromatogram deserves a look even when the percentage passes. Crystallisation and drying move the melting range, the colour and the loss on drying. Milling shifts the particle-size result while the chemistry stays the same. The 40 mesh line belongs to finishing, so a new mill or sieve can move it without any change in the molecule. A drift across several lots tells you more than one value sitting near a limit: assay drifting low, a new peak in the chromatogram, or a melting range that no longer sits in the middle of the window. Check that the lot code on the certificate also appears on the pouch, the drum and the retained sample. ## When to order an outside test An independent test is worth ordering for a new source, an opening shipment into a regulated market, a contested identity, or a label that names ergocalciferol while the certificate stays vague. The useful panel is HPLC with a diode-array detector against an ergocalciferol standard, the ultraviolet spectrum, the melting range, loss on drying, ICP-MS for the heavy metals and microbiology. Add a cholecalciferol screen by retention or by mass detection when the form is in question, and residual solvents if the supplier's route uses them. The laboratory should state the detection limit it reached for the D3 screen. A “not detected” entry with no limit describes the method's reach, not the sample. Keep the chain of custody intact: test the sample that was retained, and make sure the report names the lot. ## What to compare between suppliers Compare six lines: form and CAS number; assay result, basis and reference standard; identity by HPLC/UV and melting range; isomer profile; loss on drying and particle size; contaminants, pack size and lot code. If two offers agree on the assay but not on the standard or the basis, they are not describing the same powder. Traceability is the next layer. The certificate should name the manufacturing site, the specification version and the pack. The grade and its limits are listed on the vitamin D2 product page. The tests that separate D2 from D3 are on the identity page; the label consequences are on the D2 versus D3 page; the HPLC method is described in the HPLC method note, with the wider set in the analytical methods library; the release workflow is on the quality page. ### 02 Crystalline powder, oil or dilution: choosing a vitamin D2 grade URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-d2/grades/ Reviewed: 2026-11-19 Vitamin D2 is supplied as a white crystalline powder at 97.0–103.0% by HPLC, and the catalog also offers an oil-based format on request. The choice is set by the dose weight and the dosage form, because the pure material is far too concentrated to weigh into a single capsule. A diluted or triturated grade is a new specification, not a packing option. In one lineThe grade is chosen by the dose weight and the dosage form; the 99% crystal is a bulk material, not a capsule fill. ## Why vitamin D2 is sold in more than one presentation Ergocalciferol is a crystalline sterol. It is practically insoluble in water and soluble in oils and organic solvents, so the same molecule can be presented as a dry crystal or carried in an oil. Those are not two purities of the same grade; they are two ways of putting a very small amount of a very potent material into a dosage form. The arithmetic explains the dilution. A 1,000 IU dose is 25 µg, or 0.025 mg, of ergocalciferol. A capsule that weighs 300 mg cannot carry 0.025 mg evenly without a premix. A 100,000 IU/g trituration puts the same 1,000 IU into 10 mg of powder. The catalog crystal is the concentrate from which such a trituration is made. ## The catalog formats side by side Crystalline vitamin D2 and the oil-based format | Property | Crystalline powder | Oil-based blend | Assay basis | 97.0–103.0% ergocalciferol by HPLC | Declared IU or µg per gram in the oil | Appearance | White crystalline powder | Clear to pale yellow oil | Solubility | Soluble in oils and organic solvents; insoluble in water | Miscible with oils; needs an emulsifier in water | Dose handling | Needs a premix or a diluted grade | Can be weighed and filled at low IU per gram | Usual dosage form | Capsules, tablets, dry blends | Softgels, oil drops, emulsions | Standard pack | 1 kg foil pouch; 25 kg fiber drum | On request | Main analytical risk | Isomer profile and melting range | Oil quality and extraction recovery The last row is the one that differs most in practice. A dry certificate is read for assay, melting range and related substances. An oil certificate also has to describe the carrier, the antioxidant and the peroxide value, because the oil is most of the product and it can fail before the vitamin does. ## What the powder and the oil are like to handle The crystal is white, free-flowing at 40 mesh and specified at loss on drying ≤0.5%. It melts at 115–118 °C, which is an identity line rather than a processing temperature. It is light-sensitive, so the bench work belongs under yellow or subdued light and the remainder goes back into the foil pouch, not into a clear jar. The oil format is a carrier decision. Medium-chain triglycerides, sunflower oil and olive oil behave differently in softgels and in emulsions, and each has its own oxidation profile. The vitamin is protected from moisture in oil, but it is exposed to dissolved oxygen and to the carrier's peroxides. An antioxidant may be part of the formulation; it is not part of the ergocalciferol identity. Neither format is water-soluble. An aqueous drink needs an emulsion or a water-dispersible powder, and that is a third specification with its own carrier and its own stability work. ## Dose arithmetic and the label The IU conversion is fixed: 1 µg of vitamin D2 is 40 IU. A 10 µg dose is 400 IU, 25 µg is 1,000 IU, 50 µg is 2,000 IU and 100 µg is 4,000 IU. The same figures apply to vitamin D3, which is why the IU alone does not say which molecule is in the pack. In the US the label declares vitamin D in micrograms and may add the IU in parentheses; in the EU and the UK the declaration is in micrograms and as a percentage of the reference value. The ingredient list names ergocalciferol. A label that says only “vitamin D” leaves the form to the ingredient list, and a label that says “vitamin D3” cannot be satisfied by this material. The pack arithmetic is worth doing once. One kilogram of the 99.0% crystal contains about 39.6 billion IU. A formulator therefore buys the crystal to make a premix, not to fill capsules from the drum. A diluted grade is specified by its IU per gram and its carrier, and the certificate reports the dilution as well as the assay. ## What to write into the specification - “Ergocalciferol, CAS 50-14-6, C28H44O, vitamin D2.” - “Assay 97.0–103.0% by HPLC on the stated basis, against an ergocalciferol reference standard.” - “Identification by HPLC retention and UV spectrum; melting range 115–118 °C.” - “Loss on drying ≤0.5%; particle size ≥95% through 40 mesh.” - “Heavy metals and microbiology as listed; cholecalciferol screened and reported.” - “For a diluted grade: IU or µg per gram, carrier, and the assay of the blend.” A specification for the crystal does not transfer to an oil blend or a trituration. Each format has its own assay basis, its own carrier and its own stability file. ## When the other format is the wrong choice The crystal is the wrong choice when the formula needs a direct oil fill or a low-dose aqueous system and the plant has no premix step. An oil blend is the wrong choice when the label declares a powder, when the capsule fill must stay dry, or when the customer's specification is written around the pure substance. A diluted grade is the wrong choice when the label declares 99% or when the market file describes the concentrate. The dilution is a new material with a new carrier, a new assay and a new stability question, and it should be ordered as such rather than produced informally at the bench. The product page carries the catalog specification. The D2 versus D3 comparison covers the molecule and the label; the vitamin D3 page covers the other form; the COA page shows how each figure is reported; the MOQ page covers packs and lead time; the quality page covers release. ### 02.1 Vitamin D2 vs D3: two molecules, two labels URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-d2/grades/vitamin-d2-vs-d3/ Reviewed: 2026-11-19 Vitamin D2 (ergocalciferol) and vitamin D3 (cholecalciferol) are different molecules: C28H44O at 396.65 g/mol against C27H44O at 384.64 g/mol, with different melting ranges and different starting materials. They share the labelling convention of 40 IU per microgram, not a label name. A formula switch changes the specification, the certificate, the label and the source statement. In one lineThe IU figure is shared at 40 per microgram, but the molecule, the analytical standard, the label name and the source statement are not interchangeable. ## Two molecules, two starting materials Ergocalciferol and cholecalciferol side by side | Property | Vitamin D2 | Vitamin D3 | Name | Ergocalciferol | Cholecalciferol | Formula and mass | C28H44O · 396.65 g/mol | C27H44O · 384.64 g/mol | CAS number | 50-14-6 | 67-97-0 | Usual starting material | Ergosterol from yeast or fungi, opened by UV | 7-Dehydrocholesterol from lanolin, or lichen, opened by UV | Melting range | 115–118 °C | 84.5–87 °C | Ultraviolet maximum | About 265 nm | About 265 nm The structural difference is in the side chain. Ergocalciferol carries a double bond between C22 and C23 and a methyl group at C24; cholecalciferol has neither. That is enough to change the molecular mass by 12.01 g/mol and the melting range by about 30 °C, and it is enough to make the two separate specification items. The starting material is a commercial and a labelling fact, not an identity test. Ergocalciferol comes from ergosterol, usually from yeast, which is why the D2 route is generally accepted as vegan. Cholecalciferol from lanolin is not vegan; the lichen route is the vegan D3 option. The source belongs in the file because a change of source can change the carrier and the impurity profile. ## The IU arithmetic is shared Labelling assigns 40 IU to a microgram of ergocalciferol and the same 40 IU to a microgram of cholecalciferol, so the unit says nothing about which molecule is present. Ten micrograms is 400 IU, 25 µg is 1,000 IU and 100 µg is 4,000 IU, whether the carrier is D2 or D3. The conversion is an arithmetic convention, not a statement that the two molecules behave identically in every respect. A potency figure therefore needs its form beside it. The same 40 IU per microgram applies to both, so a 25 µg capsule of either form declares 1,000 IU. Changing the form replaces the ingredient; it is not a dose rescale. Questions about the comparative effect of the two forms belong to the clinical file, not to this page. The mass per IU is the same: 1,000 IU is 25 µg of either form. A premix can use the same arithmetic, but the assay standard, the retention time and the label name still change. ## What the label has to name How each market declares vitamin D and its form | Market | Quantity and reference value | Form in the ingredient list | EU | Micrograms per portion and % of the 5 µg (200 IU) reference value | Ergocalciferol or cholecalciferol, as used | US | Micrograms against a 20 µg (800 IU) Daily Value; IU may be added in parentheses | “Vitamin D (as ergocalciferol)” | UK | Micrograms and % of the 5 µg (200 IU) reference value | Ergocalciferol or cholecalciferol, as used “Vitamin D2” is a specific name, not a synonym for vitamin D. A pack made with ergocalciferol cannot call itself D3 or cholecalciferol, and a cholecalciferol pack should not be sold as D2. The generic nutrient name may appear on the front of the pack, but the ingredient list has to name the form that is present. The source statement sits beside the form. A vegan claim is supported by the ergosterol route for D2 or the lichen route for D3; lanolin-derived D3 does not support it. The claim is the brand's, and the supplier's source statement is the evidence behind it. ## The assay has to match the molecule Both forms are determined by HPLC with ultraviolet detection near 265 nm. Their spectra are similar, so a single “vitamin D” peak does not show which molecule was measured. A defensible method runs an ergocalciferol standard for a D2 lot and a cholecalciferol standard for a D3 lot, resolves the two peaks, and reports the result against the matching standard. Retention time is the first discriminant; co-injection or a diode-array spectrum strengthens the assignment; mass detection separates the two when the peaks overlap. The certificate should identify the standard, column, mobile phase and wavelength, and say whether the other form was screened, with the detection limit. A certificate written against a D3 standard does not release a D2 lot. One potency figure fits either molecule; the chromatogram and the reference standard are what separate them. Moving from D3 to D2 therefore calls for a fresh specification and certificate, not an annotation on the old one. ## Stability follows the form and the pack Both forms are sensitive to light, heat and oxygen. Ergocalciferol has the higher melting range, but that does not make it the more stable molecule in every matrix: its extra double bond is an additional site for oxidation, and acidic matrices promote isomerisation for both forms. The pack, the carrier and the matrix decide the rate. The crystalline powder is specified at loss on drying ≤0.5% and protected by a foil pouch. An oil blend adds the carrier's oxidation to the file, and an emulsion adds light, oxygen, heat and pH at once. A stability summary written for a D3 powder does not transfer to a D2 powder, and a D2 powder summary does not transfer to a D2 oil blend. What transfers is the method: state the pack, the condition, the time points and the tests, and report the individual results. The vitamin D2 stability page sets out that protocol. ## What changes when the form changes Switching D2 for D3 replaces the ingredient; the two are not interchangeable. The specification changes (CAS number, formula, melting range, assay standard), the certificate changes, the label changes, the source statement changes and the stability file has to be repeated for the new form and the new matrix. The 40 IU per microgram arithmetic carries over, but the label and the regulatory citation have to point to the molecule in the pack. A D2 lot does not meet a D3 specification, and a D3 lot leaves a label naming ergocalciferol unsatisfied. Before a form change, request a new certificate, a chromatogram against the matching standard and stability data for the new matrix. The vitamin D2 product page covers the ergocalciferol grade; the vitamin D3 product page covers the cholecalciferol grade; the D2 grades page compares the powder and oil formats; the D2 COA page explains the assay; the D2 compliance page covers the market files; the HPLC method note describes the separation; the quality page covers the release workflow. ### 03 Vitamin D2 is light- and heat-sensitive; the pack decides the rest URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-d2/stability/ Reviewed: 2026-11-19 Ergocalciferol is sensitive to light, heat and oxygen, and the crystalline powder is stable only while the pack excludes them. The oil format adds the carrier's own oxidation to the list. Shelf life is assigned from data for the exact pack, matrix and storage condition, not from the melting range or the certificate. In one lineThe molecule fails in light and heat; the pack, the headspace and the carrier decide how long the declared IU figure stays true. ## The powder: light, heat and a tight moisture limit The catalog sets loss on drying at ≤0.5%, which is a tight limit for an organic crystal. It is a release gate rather than a storage allowance, but it matters because moisture and heat together promote hydrolysis and isomerisation at the surface of the powder. A pouch that is left open in a humid room will move the loss on drying and the as-is assay before the colour changes. Light is the dominant failure mode. Ergocalciferol absorbs ultraviolet light and rearranges; the products include previtamin D2, tachysterol and lumisterol, and the assay falls as they form. Keep the powder in its original foil pouch, or in an opaque container with a real seal. A clear jar on a windowsill is an exposure, however short. The melting range of 115–118 °C is an identity line, not a storage temperature. It does say that the crystal is not a low-melting solid that will slump in a warm warehouse, but a hot loading bay, a vehicle in summer or a shelf above a heater still adds a heat load that accelerates the other reactions. After cold storage, let the sealed pack reach room temperature first; otherwise condensation forms on the powder. ## The oil and the solution: the carrier joins the reaction Vitamin D2 is practically insoluble in water, so a liquid format is an oil, an alcohol or an emulsion. In oil, the vitamin is protected from moisture but exposed to dissolved oxygen and to the carrier's own peroxides. A refined oil with a low peroxide value and an antioxidant is a different stability proposition from a crude carrier, and the certificate for an oil blend should describe the carrier as well as the vitamin. In alcohol, the vitamin is in a clear, oxygen-containing liquid: light and oxygen both reach it, and a clear bottle is the wrong pack. In an acidic matrix, vitamin D can isomerise; the rate depends on the acid, the pH, the temperature and the time, so it has to be measured in the matrix rather than assumed from the powder. An emulsion combines all of the routes. Light, oxygen, heat and pH act at once, and the oil droplets present a large surface to the water phase. A result obtained on the bulk powder tells you little about an emulsion, a softgel or a drink. The matrix, the process and the pack each change the rate. ## What drives degradation Factors that move vitamin D2 during storage | Factor | What it does | Control | Light | Photorearrangement; assay and isomer profile change | Opaque or foil pack; dark store; subdued bench light | Heat | Accelerates oxidation and isomerisation | Controlled store; cool process; no hot hold | Oxygen | Oxidation of the side chain and the carrier | Low headspace; sealed pack; antioxidant in oil | Acid | Isomerisation in acidic matrices | Validate the matrix pH and the hold time | Moisture | Surface hydrolysis; loss on drying rises | Sealed pouch; desiccant where needed | Carrier peroxides | Oxidation of the vitamin in an oil blend | Peroxide value limit; fresh carrier; antioxidant These factors are not independent. A warm, bright, humid store is worse than the sum of three separate effects, and an oil blend in clear glass combines light, oxygen and heat. The question to ask is not whether vitamin D2 is stable in general, but how long it holds in a named pack under a named condition. ## A stability protocol for the ingredient A protocol worth reading names the pack, the condition, the time points and the test panel. The warehouse is covered by long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65%; accelerated storage at 40 °C/75% puts the pack under stress. Add a light-exposure arm designed to the standard photostability approach; a dark incubator cannot show that failure. Test assay against an ergocalciferol standard, the related-substance and isomer profile, appearance, loss on drying, melting range and microbiology at each point. For an oil blend, add the peroxide value, the carrier identity and the assay after extraction. Each result should appear in the report; a pass statement alone is not a report. Name the pack and the lot family as well. Request the stability summary for the pack you intend to buy. The drum and the pouch differ in surface-to-volume ratio, headspace and how often they are opened. A 40 °C result on a different pack is a starting point, not the file for your material. ## The finished formula changes the answer A capsule or tablet keeps water activity low, yet the shell, the fill and the excipients can still pass moisture and oxygen. Check loss on drying at release and after storage, check the appearance of the fill, and confirm that the assay still matches the label claim. A tablet with a light-coloured shell and a clear blister is more exposed than the same tablet in an opaque pack. A softgel carries the vitamin in oil, so the oil's oxidation is the stability question as much as the vitamin's. In a powder stick the seal and the foil are the product; inspect the strip for pinholes instead of looking only at the powder. A drink brings light, pH, heat and oxygen together and needs data of its own. An overage belongs to the label and stability file. It cannot rescue a pack that admits light or moisture, and it does not turn a bulk result into a matrix result. ## How the shelf life is set There is no single shelf-life figure for vitamin D2 here, because the pack and the storage condition set it. The specification carries the assigned retest period, and the stability file for that pack supports it. A figure with no pack, condition or test panel behind it is an assertion, not a shelf life. At the end of the retest period, re-assay the retained sample before any extension. An extension needs a result, and a bulk figure does not carry across to a repacked container or an oil blend. The product page lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the HPLC method note describes the assay; the methods library covers the rest; the quality page describes the release workflow. ### 04 Vitamin D2: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-d2/moq/ Reviewed: 2026-11-19 The MOQ for vitamin D2 is 1 kg, supplied as a 1 kg foil pouch, with a 25 kg fiber drum as the bulk pack. A standard order moves in 1–7 days. A firm quotation needs the form, the assay basis, the quantity and pack, the destination and Incoterm, the documents, and the intended use. In one lineOne kilogram is the smallest pack that carries its own lot code and certificate, and it is enough to qualify the material before a production order. ## Why the minimum is 1 kg Vitamin D2 is not sold by the dose at this stage. One kilogram of the 99.0% crystal contains about 39.6 billion IU, so a single pack covers an enormous number of finished doses once it has been diluted. The 1 kg minimum is not a volume incentive; it is the smallest unit that can carry its own lot code, be sampled properly and be traced from the certificate to the pack. That pack supports a bench trial, a retained sample and an independent identity test. It travels as a parcel, which helps when a formulator needs material before the production plan is settled. Anything under 1 kg is normally split from a larger lot and repacked, which adds handling and breaks the link to the original pack identity. The 25 kg fiber drum is the bulk pack; it cuts handling per kilogram but ties up inventory and storage time, and it is the wrong first purchase for a formula that has not been qualified. The minimum is about the pack, not about pushing volume. ## Packs and formats Standard vitamin D2 packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Light and moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Oil blend | On request | Softgel or oil fill | Carrier and IU per gram are part of the specification | Diluted powder | On request | Low IU per gram | Carrier, assay and label change The catalog form is a 40 mesh crystalline powder: ≥95% through 40 mesh. An oil blend or a trituration is a different specification, not a packing choice. If the dosage form needs a low IU per gram, say so before the quotation, because the change moves the assay line, the carrier declaration and the lead time. ## Lead time and dispatch A standard pack leaves in 1–7 days once the order is confirmed. The clock covers picking, paperwork and dispatch; transit, customs and the customer's own release sit outside it. An oil blend, a dilution or a special pack takes longer; quote that time as a separate line. Get the dispatch date as well as the lead time. The drum usually moves on a pallet and the pouch as a parcel; the Incoterm fixes who books freight and who clears customs. Documents travel with the lot, never behind it. ## What a quotation needs A quotation that can be compared should carry six things: - Product and form. Ergocalciferol, CAS 50-14-6, vitamin D2, with the form written out. - Specification. Assay basis and reference standard, melting range, loss on drying, particle size, heavy metals and microbiology. - Quantity and pack. 1 kg pouch, 25 kg drum, or an oil or diluted variant with its carrier. - Destination and Incoterm. Where it is going — country, port or address — and the trade term. - Documents. COA, specification, SDS and whatever market statement the importer requires. - Intended use and market. The intended use — supplement, food or other — and the selling market. Leave out the form, the assay basis or the market and the offer is not yet a quotation. One destination may accept the powder while another does not; the paperwork is part of what is being sold. Commercial terms are stated on the quotation, not on this page. ## The sample is a lot, not a demonstration The 1 kg pack is the sample that qualifies the material. Test identity by HPLC and ultraviolet spectrum, assay against an ergocalciferol standard, melting range, loss on drying and microbiology before scaling, and keep a retained sample from the same pack. Sample, certificate and quotation should share one lot code. A smaller bench quantity is a conversation to have before the order, not after. A split from a bulk lot is a repack with its own traceability; record it as a repack rather than as the catalog pack. A bench sample and a production drum are not automatically from one lot. ## Terms to settle before the first order The offer covers commercial terms, the Incoterm, the pack, the lead time and the documents. The quality terms sit alongside: which specification revision applies, the certificate for each lot, the retained sample, the retest period and the change-control path. Settle the quality agreement before the first production order, while both sides still agree on the process. The quotation and the quality agreement set the return and replacement route. When a lot fails the agreed specification, work from the retained sample and a joint re-test; a photograph of the powder proves nothing. Agree in advance who pays for the referee test and which laboratory both sides accept. The product page lists the grade and its limits; release tests are on the COA page; market files are on the compliance page; the MOQ glossary entry defines the term; the logistics page covers shipping and documents; the quality page describes the release workflow. ### 05 The regulatory file for vitamin D2 URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-d2/compliance/ Reviewed: 2026-11-19 Ergocalciferol is a named vitamin D source for food supplements in the EU, the US and the UK, but the permission is form-specific and the label rules differ by market. The file has to show that the form, the level, the label and the claim agree. Read this as sourcing guidance rather than legal advice, and read the current instruments, which can be amended. In one lineErgocalciferol is a named vitamin D source, not a generic vitamin D; the file has to show that the form, the level, the label and the claim agree. ## Four checks and one document set Four questions make up a market file: whether the form is permitted, whether the lot meets the level and contaminant limits, whether the label uses the allowed name and units, and whether the claim is allowed. All three markets answer the first check the same way; the rest diverge. A lot can pass every test and still fail at the label. The document set is the same in outline everywhere: specification, certificate, technical data sheet, safety data sheet, source statement, allergen and GMO statements, and a stability summary. The destination decides which statements need a specific wording. Version numbers on the document list beat a folder of undated files. ## European Union Directive 2002/46/EC lists the vitamins and the forms permitted in food supplements; Annex II, Part A names ergocalciferol and cholecalciferol. The food-supplement list is the route here, not the novel-food route. A fortified food takes the addition route under Regulation (EC) No 1925/2006 instead, so the buyer's regulatory team confirms which route the finished product follows. The label rule comes from Regulation (EU) No 1169/2011: vitamin D appears in micrograms per portion and as a percentage of the 5 µg (200 IU) nutrient reference value, alongside the supplement particulars and the daily-dose warning. The ingredient list names the form that is present, ergocalciferol for this material. Contaminants are governed by Regulation (EU) 2023/915, which sets lead 3.0 mg/kg, cadmium 1.0 mg/kg and mercury 0.10 mg/kg for food supplements; there is no harmonised EU maximum for total arsenic, so the specification sets one. Maximum vitamin levels are not harmonised in the EU, so a member state may set its own. EFSA puts the tolerable upper intake level for adults at 100 µg/day; that is a scientific reference, not a product ceiling. ## United States Ergocalciferol is a dietary ingredient sold under DSHEA and was marketed before 15 October 1994, so the pre-1994 route applies rather than a new dietary ingredient notification. Manufacture falls under 21 CFR 111, which requires an identity test on each component and a qualified supplier. The panel format is set by 21 CFR 101.36. It declares vitamin D in micrograms against a 20 µg (800 IU) Daily Value; the IU may follow in parentheses, and it is optional. The ingredient list identifies the source as ergocalciferol. A US structure/function statement carries the DSHEA disclaimer and stays clear of disease. Washington sets no federal lead ceiling for supplements, so US buyers write their own and watch state rules such as California's Proposition 65. The supplier's certificate supports the buyer's identity test but cannot stand in for it. ## The limits in the file Catalog limits with the market note for each | Parameter | Catalog limit | What the market file needs | Lead | ≤3 mg/kg | Result against the 3.0 mg/kg EU supplement limit; check any national or state rule | Cadmium | ≤1 mg/kg | Result against the 1.0 mg/kg EU supplement limit | Mercury | ≤0.1 mg/kg | Result against the 0.10 mg/kg EU supplement limit | Arsenic | ≤2 mg/kg | No harmonised EU supplement maximum; the buyer sets the limit | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Method and result for each test | Loss on drying | ≤0.5% | Result and basis; moisture moves the as-is assay These are catalog limits, not a statement that every market applies the same legal maximum. The melting range on the certificate is an identity line, not a contaminant limit. The certificate carries the measurement; the file relates it to the destination ceiling. ## Where the claim boundary sits EU claims are governed by Regulation (EC) No 1924/2006 and the EU Register. A claim is available only when it appears on the Register, its conditions of use are met and it stops short of a disease claim. Vitamin D has authorised claims, and this page does not repeat their wording; the brand's review decides whether one fits its product and dose. In the US, a structure/function statement carries the DSHEA disclaimer and stays clear of disease. In the UK, the GB register governs, and an EU-authorised claim is not automatically available in Great Britain; Northern Ireland follows the EU framework. The ingredient name is a specification term, not a claim: “ergocalciferol” and “vitamin D2” describe the material, not a benefit. No health claim is made here for the ingredient, and the brand owner owns every statement on the pack. ## The document set Documents a brand should hold for a vitamin D2 lot | Document | What it should establish | Certificate of analysis | Lot code, assay and standard, melting range, loss on drying, particle size, contaminants, micro | Specification | The release limits the certificate is judged against | Technical data sheet | Form, solubility, pack, storage and shelf life | Safety data sheet | Handling, storage and transport classification | Source statement | Ergosterol route, manufacturing site and carrier source | Allergen and GMO statements | The declarations the destination market requires | Stability summary | The data behind the shelf life and the storage statement The source statement also answers the vegan question. Ergocalciferol is made from ergosterol, typically from yeast, while the usual cholecalciferol route starts from lanolin. The two routes are not interchangeable in a vegan claim, and the statement belongs in the file even when the market does not require it. ## A short checklist - Does the certificate name the lot, the assay basis and the ergocalciferol standard? - Is the melting range inside 115–118 °C and the loss on drying within 0.5%? - Are the four contaminant results inside the destination limits? - Does the label use micrograms and the local reference value — 5 µg in the EU and UK, 20 µg in the US? - Does the ingredient list name ergocalciferol rather than “vitamin D” alone? - Does each claim on the pack fit this form and this market? - Do certificate, label and retained sample carry the same lot code? The grade and its limits are on the vitamin D2 product page. The certificate is explained on the COA page; the identity evidence on the identity page; the label comparison with the other form on the D2 versus D3 page. The release workflow is on the quality page, and the EU framework references are on the regulatory notes. ### 06 How we prove a vitamin D2 lot is ergocalciferol URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-d2/identity/ Reviewed: 2026-11-19 A vitamin D2 lot is ergocalciferol when the documents, the chromatogram, the ultraviolet spectrum, the melting range and the mass balance agree. The assay alone cannot separate D2 from D3, because the two molecules have similar ultraviolet spectra and the same IU convention. The form has to be proved by retention against an ergocalciferol standard and by a solid-state check. In one lineIdentity is the agreement of four measurements: retention against an ergocalciferol standard, the ultraviolet spectrum, the melting range and the mass balance. ## The four identity layers A certificate can carry the right name and still leave the material unproven. Each layer below asks a different question, and each needs its own measurement. An answer that stops at the first layer describes paperwork, not powder. How each identity layer is tested | Layer | Question | Test | What it proves | Document | Is the form named? | Name, CAS 50-14-6, formula C28H44O | Paperwork only | Chromatography | Is the peak ergocalciferol? | HPLC retention against a D2 standard, co-injection | The molecule, if the standard is the right one | Spectroscopy | Is it a vitamin D sterol? | UV spectrum near 265 nm; melting range | The chromophore and the solid form | Mass balance | Is it diluted or mixed? | Assay, loss on drying, related substances | Consistency of the numbers The spectroscopy row is where D2 and D3 are weakest to separate. Both absorb ultraviolet light around 265 nm, so a spectrum that matches “vitamin D” does not say which molecule produced it. Retention against the matching standard is the discriminating test; the melting range supports it. ## The ratio that checks the paperwork The IU is a ratio: 40 IU per microgram of either vitamin D form, or 40,000 IU per milligram. That fixed ratio turns an assay into an IU figure and back again. A 99.0% powder carries 990 mg of ergocalciferol per gram, which is 39,600,000 IU/g. An oil declared at 1,000,000 IU/g must contain 25 mg of ergocalciferol per gram, or 2.5%. If a supplier's IU figure does not reconcile with the assay and the dilution, one of the three numbers is wrong. The same arithmetic catches a unit error. A certificate that reports 2,500 µg/g and a specification that asks for 100,000 IU/g are describing the same concentration, because 2,500 × 40 = 100,000. A buyer who reads the microgram figure as an IU figure rejects a compliant lot; a buyer who reads it the other way accepts a lot at one fortieth of the grade. The second ratio is the peak-area ratio when both forms are screened. A D2 peak with a D3 shoulder is a mixed lot, even when the total “vitamin D” area is inside the assay range. The certificate should name the D2 standard and state whether a D3 screen was run and at what detection limit. ## X-ray diffraction and the solid state X-ray diffraction asks about the solid: is it crystalline, and does the pattern fit an ergocalciferol reference? It can distinguish the crystal from an amorphous dispersion or a trituration, and it can compare lots from two sources. It is not a potency assay, and it does not measure the IU. Before accepting a “match” statement, ask for the reference pattern and the detection limit. The melting range is the simpler solid-state check and is already on the catalog: 115–118 °C. A melt that begins and ends in that window is consistent with crystalline ergocalciferol; a broad or low melt points to a mixture, a solvate or a different sterol. XRD is the stronger evidence when a lot is disputed, when a new source is qualified, or when the powder is supposed to be pure but the assay is lower than the label. Neither test replaces the chromatogram. The solid-state methods say what the powder is; the chromatogram says how much of the named molecule is present. ## What adulteration looks like Substitutions and the signals that catch them | Adulterant | What it does | Signal | Test | Cholecalciferol | Same chromophore, different mass and retention | D3 peak under the D2 retention window | HPLC against a D2 standard; LC-MS at 384.64 versus 396.65 | Ergosterol | Unconverted precursor; different UV maximum | Extra peak; spectrum shift | HPLC/UV, related substances | Lumisterol or tachysterol | Irradiation by-products; lower potency | Isomer peaks; assay below the label | Related-substance method, UV | Inert dilution | Lowers the assay; removes the melt | Assay low; no sharp melting range | Assay, melting range, XRD, mass balance | Oil carrier substitution | Declared carrier is not the carrier used | Fatty-acid profile differs; peroxide value high | Carrier identity, peroxide value, assay after extraction Appearance is the least specific signal. Ergocalciferol is a white crystal, and a white diluent reproduces the look without reproducing the molecule. The stronger signals are the retention time, the melting range and the mass balance. A certificate with appearance and assay but no chromatogram has not tested the likely substitution. ## How to write the identity into the specification - “Ergocalciferol, CAS 50-14-6, C28H44O, vitamin D2.” - “Assay 97.0–103.0% by HPLC on the stated basis, against an ergocalciferol reference standard.” - “Identification by HPLC retention and UV spectrum; melting range 115–118 °C.” - “Loss on drying ≤0.5%; particle size ≥95% through 40 mesh.” - “Cholecalciferol screened and reported, with the detection limit.” - “No undeclared diluent; for a blend, the carrier and the IU per gram are stated.” A negative statement carries weight only when the method could have found the substance. Pair “no cholecalciferol added” with a D3 screen, and pair “no undeclared diluent” with the mass balance and the melting range. ## Five questions for the supplier - Which reference standard was used, and can you send the chromatogram? - How was cholecalciferol screened, and what detection limit applied? - What is the melting range for this lot, and how was it measured? - What is the loss on drying, and on which basis was the assay calculated? - If this lot is contested, will you re-test the retained sample jointly? Five straight answers make an identity file; one assay percentage does not. The product page carries the catalog specification; the COA page shows where each figure sits on the certificate; the grades page compares the formats; the D2 versus D3 page covers the other molecule, and the vitamin D3 page carries its specification; the HPLC method note explains the separation; the quality page describes the release workflow. ### 01 Reading a vitamin K1 COA: assay, refractive index and isomers URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k1/coa/ Reviewed: 2026-11-19 The certificate for a vitamin K1 lot reports appearance, identification by HPLC retention and UV spectrum, assay by HPLC, refractive index, related substances, the heavy-metal panel and microbiology. A usable line gives the method, the release limit and the figure measured on the lot. The ranges here are the catalog specification for phytonadione oil; the batch COA confirms a particular bottle. In one lineAn assay inside 97.0–103.0% says the oil is mostly phytonadione; the refractive index and the isomer figure say which oil it is. ## How to read a row A certificate earns its place when a row can be checked without a phone call: it names the measurement, the method and the limit the lot was released against. A row that offers only “conforms” moves the judgement back to the supplier and leaves nothing to audit. The refractive index is the simplest independent check that the bottle holds phytonadione and not a triglyceride oil with a convincing yellow colour. Identity, assay and physical limits · vitamin K1 (phytonadione) oil | Parameter | Method | Release limit | Appearance | Visual | Clear yellow to amber viscous oil | Identification | HPLC retention and UV spectrum against a phytonadione reference | Conforms to the reference | Assay | HPLC with UV detection | 97.0–103.0% | Refractive index | Refractometry, temperature stated | 1.525–1.528 | Related substances | HPLC, peak-area normalisation | cis-isomer and epoxide reported per lot; limit agreed on the specification | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent The identification row and the assay row answer different questions. Identification says the peak is phytonadione, by retention and by the ultraviolet spectrum of the naphthoquinone chromophore; the assay says how much is there. One peak with no spectrum has shown half of the identity. ## What the percentage is a percentage of Vitamin K1 is supplied as the substance itself, not as a diluted powder, so 97.0–103.0% by HPLC is a purity window around 100% rather than a concentration. There is no carrier to divide out and no anhydrous correction: the specification has no loss-on-drying line, and volatile matter appears as a lower assay. A “50% vitamin K1 oil” is a different product whose certificate describes a blend. The ±3% window holds the related substances from the synthesis, the residual solvent that survives purification, and the repeatability of injecting a viscous oil. It is not a licence to read 97.1% as 100%. Weigh the oil rather than dispensing it by volume: density is not a line on this specification, and a volumetric fill carries an error that is large against a three-point window. An opened bottle is also a different sample from a fresh one, because the surface has seen air and light. ## Release limit and batch result A limit defines what will be accepted; a result records what was found. The two deserve separate columns, with the method alongside, because a column that repeats the limit says nothing about the lot and conceals where inside the window it fell. Result entries that can be checked against the limit | Parameter | Release limit | Result column | Assay | 97.0–103.0% by HPLC | A measured percentage, on the oil as received, with the method | Refractive index | 1.525–1.528 | A measured value with the temperature of the measurement | Related substances | cis-isomer and epoxide, limit agreed on the specification | A peak list with retention and area percentage | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot Refractive index is the line most often reported as its own limit instead of as a measurement, and it is the one where temperature matters: the value moves with the prism, so a figure without a temperature cannot be compared with the next lot. When related substances sit near their limit, ask for the chromatogram; the integration of the cis peak is where a marginal result is decided. Microbiology for a fat-soluble oil still needs a count and an absence statement. ## What moves between batches Phytonadione is made by condensing menadione with isophytol or a phytyl halide and then purifying the product. The condensation does not fix the geometry of the double bond in the phytyl chain, so the crude carries both trans and cis, and the purification decides how much cis survives. A shift in the isomer figure between lots is a process signal, not a laboratory error. Colour is the second variable: clear yellow to amber is a wide window. A lot at the amber end after a long hold is not automatically out of specification, but a step change across lots can point at light or heat exposure before sealing. Assay and refractive index move together when residual solvent is present, and both move when the oil has taken up water, which shows as haze rather than as a lower assay. Heavy metals follow the menadione source and the equipment. One certificate proves little about a trend; three lots in a row are what turn a result into a signal. ## When to order an outside test An outside laboratory earns its fee for a new source, a first shipment into a regulated market, a disputed refractive index, or a form claim the certificate does not establish. The useful panel is HPLC with a diode-array detector and a phytonadione reference, a separate isomer calculation from the same run, refractive index at a stated temperature, ICP-MS metals and the microbiology suite. Add a fatty-acid profile by gas chromatography when a triglyceride diluent is suspected: pure phytonadione carries no fatty acids, so a profile is direct evidence of a vegetable oil. Add residual solvents by headspace gas chromatography and water by Karl Fischer where haze is the complaint. Each screen should come with its detection limit: “not detected” without a figure says more about the instrument than about the bottle. The chain of custody is part of the evidence: the retained sample and the tested sample should be one and the same, the report should carry the lot code, and the bottle should be the one that arrived. For a disputed result, give the referee the retained sample and ask for tests that separate the candidate materials rather than a repeat of the same assay. ## Supplier comparison, line by line Seven lines repay a side-by-side read: form and CAS number; assay with its method; refractive index with the temperature; trans and cis figures; heavy metals and microbiology; pack size and lot code; the filling date and the manufacturer. Agreeing on assay while differing on refractive index or isomer share means the two offers are not for the same oil. Traceability is the second layer: which synthesis and purification were used, under which atmosphere the oil was filled, and whether the lot code matches the bottle, the carton and the retained sample. The catalog specification sits on the vitamin K1 product page. The tests that separate phytonadione from a blend are on the identity page; the forms are compared on the grades page; the separation behind the assay is explained in the analytical methods library; the release workflow is on the quality page. ### 02 Vitamin K1 grades: the neat oil, the carrier powder and the diluted blend URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k1/grades/ Reviewed: 2026-11-19 Vitamin K1 is sold as phytonadione oil, a viscous concentrate specified at 97.0–103.0% by HPLC with a refractive index window of 1.525–1.528. The carrier powder and the diluted oil blend are separate specifications, and the dose arithmetic, the certificate and the label follow the form. Choose the neat oil when the next step is a blend or an oil fill; choose a carrier grade when the process needs a solid. In one lineVitamin K1 arrives as a concentrate oil; the powder on a carrier and the diluted blend are different specifications, and the dose arithmetic follows the carrier. ## Why the catalog form is an oil Phytonadione carries a phytyl chain, a saturated 20-carbon tail with one double bond, attached to a methylnaphthoquinone head. That tail is what makes the molecule fat-soluble, and it is also what keeps the material liquid at room temperature: it does not build a lattice that would flow as a powder. A solid grade therefore has to be built rather than extracted, by adsorbing the oil onto a carrier or dispersing it in a matrix, and that carrier becomes part of the specification. That is why the catalog record lists the oil first. A buyer who asks for “vitamin K1 powder” is asking for a formulated grade, with a carrier, a declared content and a particle-size line, not for phytonadione as such. The distinction matters at the quotation stage, because the two are not priced, labelled or tested in the same way. The oil is also the form the monographs describe: assay, refractive index and related substances are oil tests, while a carrier grade needs a content assay that names the carrier and a matrix-appropriate method. ## The three grades side by side Neat oil, carrier powder and diluted blend · vitamin K1 | Property | Neat oil (catalog) | Powder on carrier | Diluted oil blend | Form | Clear yellow to amber viscous oil | Free-flowing powder or granule | Oil solution in a carrier oil | Assay figure | 97.0–103.0% phytonadione by HPLC | Declared content of vitamin K1 on the carrier | Declared content of vitamin K1 in the blend | What you weigh | The oil itself; about 0.1 mg for a 100 µg dose | The declared content divisor | The declared content divisor | Typical use | Softgel and oil-blend manufacture | Tablets, capsules, stick packs | Fill-ready softgel oil | Label declaration | Vitamin K (as phytonadione) | Vitamin K (as phytonadione) plus the carrier | Vitamin K (as phytonadione) plus the carrier oil | Certificate covers | The oil | The finished powder | The finished blend Only the first column is the catalog item. The other two are built from it, each with its own specification, certificate and label consequence; a quotation that offers “K1 powder” without naming the carrier and the declared content has not described a grade. ## Refractive index, viscosity and solubility The refractive index window of 1.525–1.528 is a practical filter because a triglyceride carrier oil sits far lower, near 1.47. A value below the window is direct evidence that the neat material has been blended, and a value inside it is a consistency check across lots. The measurement is temperature-dependent, so the temperature belongs on the record. The oil is viscous at room temperature. It pours slowly, clings to glass and traps air when it is stirred, so a fill line warms it to make it flow. Warming shortens the exposure window before the oil sees light and air, and it belongs in a closed, dark vessel. Solubility follows the structure: practically insoluble in water, soluble in fats, oils and organic solvents. That profile decides the dosage form. An aqueous drink is the wrong place for the neat oil unless it is emulsified, and an emulsion is a different product with a different stability file. A dry blend needs a carrier that holds the oil without releasing it at warm warehouse temperatures. ## Dose arithmetic and the fill Vitamin K doses are labelled in micrograms. One milligram is 1,000 µg, so a 100 µg dose is 0.1 mg of phytonadione, and at the catalog assay that is about 0.1 mg of the oil. A 500 mg softgel fill therefore carries the vitamin at roughly 0.02% of its mass; the rest is carrier oil, and the fill weight, the assay and the label have to agree on the micrograms. The percentage of the reference value depends on the market. Against the EU nutrient reference value of 75 µg, 100 µg is 133%; against the US Daily Value of 120 µg it is 83%, calculated as of this review. Those figures are label arithmetic, not a dose recommendation; the finished-product dose is the brand's decision and belongs in the nutrition file. A carrier grade changes the arithmetic again, because the declared content, not 100%, is the divisor. If a grade declares 1% vitamin K1, a 100 µg dose sits in 10 mg of powder; at 5% it sits in 2 mg. Ask for the declared content and its basis before computing a fill weight, and check that the carrier is permitted and declared in the destination market. An overage is sometimes used to cover loss over shelf life. It belongs to the finished-product stability file and to the label, not to the ingredient specification; no overage compensates for a pack that lets light through. ## What to write into the specification - “Vitamin K1 (phytonadione, phylloquinone), CAS 84-80-0, C31H46O2.” - “Assay 97.0–103.0% by HPLC, on the oil as received.” - “Identification by HPLC retention plus the UV spectrum against a phytonadione standard.” - “Refractive index 1.525–1.528; report the temperature of the measurement.” - “trans-isomer share and cis-isomer limit reported per lot.” - “Heavy metals and microbiology as listed; pack 1 kg or 5 kg amber bottle.” - “For a carrier grade: carrier identity, declared content, particle size and the label name.” We supply the neat oil. A carrier grade or a blend is a separate purchase with its own specification, and it should not replace the oil without written change control and a fresh label review. ## When the oil is the wrong choice If the dosage form is a direct-compression tablet, a dry stick pack or a capsule filled by a powder dosator, the oil needs a carrier before it can run. If the plant has no oil handling, no warmed lines and no nitrogen, a fill-ready blend is the more realistic purchase than a drum of concentrate. If the formula is aqueous, the oil has to be emulsified, and the emulsion is a development project rather than a substitution. The reverse is also true: a buyer who needs the neat oil should not accept a carrier powder and adjust the number at the balance, because the carrier changes the mass, the label and the stability. The catalog specification lives on the product hub. The level-four comparison places vitamin K1 against vitamin K2; the COA page shows how the oil is tested; the identity page gives the checks that separate the oil from a blend; the vitamin K2 MK-7 page covers the other K vitamin. ### 02.1 Vitamin K1 vs vitamin K2: two molecules, two labels URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k1/grades/vitamin-k1-vs-k2/ Reviewed: 2026-11-19 Vitamin K1 is phylloquinone, CAS 84-80-0, C31H46O2, molecular weight 450.70. Vitamin K2 is not one substance but a family of menaquinones, of which MK-4 (444.66) and MK-7 (649.02) are the commercial members. The structural difference is the side chain, and it reaches the label: the two are separate ingredients with separate names, dose arithmetic and documents. A label that says only “vitamin K” has not chosen either. In one lineVitamin K1 is a single phytonadione molecule; vitamin K2 is a family of menaquinones, and a label that says only vitamin K has named neither. ## One molecule and one family Both vitamins share the same head group: a 2-methyl-1,4-naphthoquinone ring. The difference sits at position 3, where the side chain is attached. In vitamin K1 that chain is a phytyl group, 20 carbons long and saturated apart from one double bond. In vitamin K2 the chain is a polyisoprenyl group: repeating five-carbon units, each carrying a double bond, with the count written into the name. MK-4 has four units, MK-7 has seven, and the series continues upward. That single difference produces two very different materials. The phytyl chain is why vitamin K1 is a viscous oil at room temperature and why it has a cis and a trans isomer at one specific bond. The polyisoprenyl chains of vitamin K2 give a series of crystalline solids whose molecular weight and lipophilicity change with every added unit. MK-4 and MK-7 are not two grades of one substance; they are two members of a homologous series, and the label has to say which one is in the product. ## The two vitamins side by side Vitamin K1 against vitamin K2 | Property | Vitamin K1 | Vitamin K2 | Common name | Phylloquinone, phytonadione | Menaquinones, MK-n | CAS number | 84-80-0 | MK-4 863-61-6; MK-7 2124-57-4 | Formula | C31H46O2 | MK-4 C31H40O2; MK-7 C46H64O2 | Molecular weight | 450.70 | MK-4 444.66; MK-7 649.02 | Side chain | Phytyl, 20 carbons, one double bond | Polyisoprenyl, 5n carbons, n double bonds | Appearance | Clear yellow to amber viscous oil | MK-4 yellow crystalline; MK-7 pale yellow powder | Label name | Vitamin K (as phytonadione) | Vitamin K (as menaquinone-7), or menaquinone-4 | Dosage-form fit | Oil fill, oil blend, emulsion | Capsule, tablet, oil suspension The table explains why the two are rarely interchangeable in a factory: one is an oil that has to be diluted before a softgel can hold a microgram dose; the others are solids that can be weighed into a capsule or a tablet blend. The 198-unit gap between K1 and MK-7 is also the gap in the number of molecules a microgram delivers. ## Micrograms are not the same number of molecules Doses for both vitamins are declared in micrograms, and a microgram is a mass, not an amount of substance. Divide by the molecular weight and the picture changes. A 100 µg dose of vitamin K1 is 100 ÷ 450.70 = 0.222 µmol. The same 100 µg of MK-7 is 100 ÷ 649.02 = 0.154 µmol, roughly 31% fewer molecules. MK-4, at 444.66, lands close to K1 at 0.225 µmol, which shows that molar mass alone does not make two materials interchangeable. The label arithmetic runs on the same digits. A 100 µg dose is 133% of the EU nutrient reference value of 75 µg for vitamin K, and 83% of the US Daily Value of 120 µg, calculated as of this review. The percentage counts the vitamin K activity declared, whichever permitted form supplies it, so a MK-7 product and a phytonadione product can show the same percentage while carrying different molecules. Those percentages are label arithmetic, not dose recommendations. The practical consequence is that a formula cannot be switched from one vitamin to the other by keeping the microgram figure. The mass changes, the molar amount changes, the carrier changes and the label declaration changes, and each of those is a separate decision. ## Label naming and the form In the European Union, Directive 2002/46/EC sets a positive list of vitamin and mineral substances and of the forms permitted in food supplements, and the vitamin K entry is form-specific. The label names the vitamin and the form; “vitamin K2” on its own is a family name, not an ingredient name, and the menaquinone has to be identified. The percentage of the nutrient reference value is calculated against 75 µg per day, as of this review. The authorised claim wording is fixed by Regulation (EU) No 432/2012 and is tied to the product being a source of the vitamin. US labelling puts the form in brackets after the nutrient name on the Supplement Facts panel, for example “Vitamin K (as phytonadione)” or “Vitamin K (as menaquinone-7)”. The Daily Value for the percentage is 120 µg, as of this review. A panel that says only “vitamin K2” leaves the ingredient unidentified, and the buyer's reviewer will ask for the form. Great Britain keeps its own list under the Food Supplements (England) Regulations 2003 and the parallel instruments in Wales and Scotland, while Northern Ireland follows the EU framework. The form is checked against the list that applies to the destination, not the one in force when the artwork was written. ## Where each comes from Vitamin K1 is made by condensing menadione with isophytol or a phytyl halide and purifying the product. The molecule is the same as the one in green leaves, so a “natural” claim cannot rest on the structure; if the source matters to the brand, the origin of the phytol needs its own evidence and statement. The synthesis leaves a cis fraction that purification has to reduce, which is why the isomer figure belongs on the certificate. Vitamin K2 arrives by two routes. MK-4 is generally produced synthetically, while MK-7 is commonly obtained by fermentation and can also be made synthetically; the route affects the isomer profile and the residual-solvent statement, and it is the first question a buyer asks about a MK-7 lot. For both vitamins the origin statement, the solvent statement and the isomer statement belong in the file, and a supplier that cannot name the route has not described the material. ## When to choose which Choose vitamin K1 when the dosage form is an oil fill, an oil blend or an emulsion, and when the label is to declare phytonadione. It is a concentrate that a fill line dilutes, and its specification is written around the oil: assay, refractive index, isomer figure. The vitamin K1 product page carries that specification, and the grades page explains the carrier and blend options. Choose a menaquinone when the formula needs a solid at a small dose, or when the brand's positioning calls for MK-7 or MK-4. The vitamin K2 MK-7 page covers that material and its all-trans requirement. Whichever is chosen, the switch is a change of ingredient, not a change of dose: it needs a new specification, a new label and a check of the destination list. The compliance page sets out the frameworks behind the label, the identity page explains the tests that tell the forms apart, the methods library describes the chromatography, and the quality page covers the release file. ### 03 Vitamin K1 stability: light, oxygen and the amber bottle URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k1/stability/ Reviewed: 2026-11-19 Vitamin K1 is sensitive to light and oxygen, and heat accelerates both. The neat oil keeps longest in a filled, nitrogen-capped amber bottle, in the dark, at controlled room temperature; a diluted fill or an emulsion adds the carrier's own oxidation to the list of risks. The retest period comes from data on the pack actually bought, not from the assay printed on the certificate. In one lineLight and oxygen degrade phytonadione whatever the pack, so the amber bottle, the headspace and the store are part of the specification. ## The bulk oil: light, oxygen and the bottle Water is not the main enemy of an oil. Phytonadione is practically insoluble in water and does not hydrolyse, so a humid store is less damaging here than it would be for a powder. Moisture still matters at the seal: water that enters through a poor closure shows as haze in the oil, and in a later emulsion it destabilises the interface. Light is the first real driver. The naphthoquinone head absorbs ultraviolet and visible light, and exposure degrades the molecule and can disturb the geometry of the double bond in the phytyl chain. A clear bottle on a windowsill is a failing pack, and a clear sample vial on a bench is a short-term exposure that still costs assay. Amber glass filters part of the light; it does not make the bottle opaque, so the cap, the carton and the store do the rest. Oxygen is the second driver. It attacks the quinone ring and the double bond, and the epoxide is the usual product; it appears as a related-substance peak before the assay has moved much. A bottle filled with air and opened repeatedly is an oxygen reservoir. Nitrogen capping reduces the headspace oxygen at filling, but it does not make an opened bottle re-sealable, so the in-use period still has to be defined. ## In a blend, an emulsion or a softgel fill The neat oil is rarely the finished dose. It is blended into a carrier oil for a fill, and the carrier changes the stability question. A triglyceride carrier oxidises on its own, and its peroxide value is a marker that the vitamin assay will not show; a blend kept warm oxidises faster than the same blend in a cool store. A clear softgel shell also lets light reach the fill. An emulsion is the hardest format. Oil droplets, water, oxygen and light meet at an interface, and the emulsion can break before the assay falls. A fortified drink or a dairy product needs its own stability work in the matrix, at the process pH and heat load; a bulk-oil result does not transfer to it. Inside a softgel the shell is a water-containing matrix. Water and plasticiser migrate between shell and fill over time, the fill can haze, and the shell can become brittle or sticky. Test the fill assay and the shell appearance at each time point, not only the oil that went into the fill. ## What drives degradation Factors that move vitamin K1 during storage | Factor | What it does | Control | Light | Degrades the quinone and disturbs the double bond | Amber glass; opaque carton; dark store | Oxygen | Forms the epoxide and other related substances | Nitrogen cap; small headspace; sealed bottle | Heat | Raises the rate of both light and oxygen damage | Controlled store; closed, dark warming | Water | Haze at the seal; interface damage in an emulsion | Dry store; intact closure; check the liner | Trace metals | Promote oxidation in a blend or an emulsion | Avoid iron and copper contact | Carrier oil | Oxidises first and masks the vitamin loss | Peroxide value on the carrier; antioxidant review These factors act together. A warm, bright store is worse than the sum of the separate effects, and an opened bottle in a warm room combines heat, air and light in one place. The useful question is not whether vitamin K1 is stable, but for how long, in which pack, at which condition. ## A stability protocol for the ingredient A protocol names the pack, the conditions, the time points and the tests. Warehouse behaviour is covered by long-term storage at 25 °C/60% relative humidity and an intermediate condition at 30 °C/65%; the pack is stressed at 40 °C/75%. A light-exposure arm, designed to the standard photostability approach, catches what a dark incubator cannot. Test assay, refractive index, related substances, appearance, water and microbiology at each point. For a blend or a softgel, add the fill assay, the shell appearance and the carrier's peroxide value. If the oil is warmed to fill, include a warmed sample, because the filling step is a heat load the store does not reproduce. The report should show the individual results rather than a pass statement, and it should name the pack and the lot family. A 5 kg bottle and a 1 kg bottle differ in headspace-to-oil ratio and in opening history, so a summary for one pack does not answer for the other. ## The finished formula changes the answer A softgel has a low water activity, but the shell still moves water and plasticiser into the fill. An oily drop in a dropper bottle is opened every day, so the in-use period matters as much as the shelf life, and the dropper itself is an air path. A powder on a carrier can release oil at warm temperature, which shows as speckling or as a loss of flow. An emulsion combines light, oxygen, pH and heat. The overage decision belongs here, in the finished-product file; it is a label decision as much as a stability one, and no percentage compensates for a pack that admits light. A dark dropper bottle, a nitrogen flush and a smaller headspace are more reliable than a larger overage. ## How the retest period is set No single shelf-life figure is published for vitamin K1, because the pack and the store determine it. The retest period is written on the specification and backed by the stability file for the pack in question. A figure offered without a pack, a condition and a test panel is marketing, not a shelf life. Once the retest period has passed, the retained sample is re-assayed before any extension. A bulk figure does not follow the oil into a repacked bottle, and a softgel study does not vouch for an oil blend. Standard packs are listed on the product hub; the COA page covers the release tests; the MOQ page covers pack and lead time; the methods library describes the assays; the quality page sets out the release workflow. ### 04 Vitamin K1: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k1/moq/ Reviewed: 2026-11-19 The order minimum for vitamin K1 is 1 kg, filled into an amber glass bottle; production buyers usually move to the 5 kg bottle. Standard lead time is 1–7 days. A firm quotation needs six details: the form and CAS number, the assay, the quantity and pack, the destination and Incoterm, the documents required, and the market where the finished product will be sold. In one lineOne kilogram is the order minimum because it is the smallest amber bottle that can hold a lot code, a certificate and a retained sample. ## Why the minimum sits at a kilogram A kilogram covers a bench trial, a retained sample and an identity test at an outside laboratory, and it travels as a parcel rather than on a pallet. It is also a lot in its own right: the bottle carries the code shared by the certificate and the retained sample. Smaller quantities are usually decanted from a larger bottle, which adds handling and breaks the link to the original pack. The oil is concentrated, so a kilogram goes a long way. At the catalog assay it holds roughly ten million 100 µg doses before any dilution, which makes the minimum a question of qualification rather than of volume. What a buyer pays for is the lot record and the tests behind it, not the grams. The 5 kg bottle is the production pack. It cuts handling per kilogram but adds glass weight, headspace and a longer storage commitment, so it belongs on the order once the fill line is running rather than while the formula is still moving. ## Packs and formats Vitamin K1 packs and grades | Pack | Net weight | Typical use | Notes | Amber glass bottle | 1 kg | Trial, sample, small batch | Nitrogen-capped; close it and keep it dark | Amber glass bottle | 5 kg | Production fill | Heavy glass; plan the decant and the in-use period | Powder on carrier | On request | Tablets, capsules, stick packs | Carrier and declared content become the specification | Fill-ready blend | On request | Softgel fill | The certificate describes the blend, not the neat oil The catalog pack is the neat oil. A carrier grade or a blend is a separate specification with its own assay, so it should not be ordered as “the same oil in a different container”. If the dosage form needs a solid, say so at the quotation stage: the carrier changes the document set and the timing. ## Lead time and dispatch Quoted lead time is 1–7 days from order confirmation, which covers picking, paperwork and handover to the carrier. Transit, customs clearance and the customer's own quality release sit outside that window. A carrier grade, a custom blend or an unusual bottle adds time, and the extra should be shown on the quotation rather than absorbed silently. Ask for the dispatch date as well as the lead time. Amber glass ships in a divided carton, and the bottle should not wait on a sunny dock or in a hot vehicle. Where a route includes a cold leg, let the bottle come back to room temperature before it is opened, so condensation does not form on the oil. ## What a quotation needs Six details turn a reply into an offer that can be compared: - Identity. Vitamin K1, phytonadione, CAS 84-80-0, and whether the oil or a named grade. - Specification. Assay with its method, refractive index, isomer figure, heavy metals and microbiology. - Pack. 1 kg or 5 kg amber bottle, or a carrier or blended grade in its own pack. - Destination. The country and Incoterm, with the port or delivery address. - Documents. COA, specification and SDS, plus any statement the importer has to file. - Market and use. Supplement, food or technical use, and the country where it will be sold. An offer that omits the market or the form cannot be compared with another. The same oil may fit one destination and fall outside the file for another, so the paperwork is part of what is being quoted. Commercial terms are set out on the quotation and not on this page. ## The sample carries the lot The 1 kg bottle is the qualification sample. Identity, assay, refractive index and the isomer figure should be checked before scale-up, and a retained sample should stay behind from the same bottle. The lot code on the bottle, the certificate and the quotation should agree; a sample without that link is a demonstration, not a qualification. If a bench trial needs less than a kilogram, raise it before ordering. A split from a bulk bottle is a repack with its own traceability and should be recorded as one. A bench sample and the production bottle are not necessarily drawn from the same lot. ## Terms to settle before the first order Commercial terms, the Incoterm, the pack, the lead time and the documents sit in the quotation. The quality terms belong next to them: which specification revision applies, a COA with each lot, the retained sample, the retest period and how a change is notified. A quality agreement signed before the first production order costs less than a dispute afterwards. Returns and replacements follow the quotation and that agreement. A lot that misses the agreed specification goes to the retained sample and a joint re-test rather than to a photograph of the oil, and the two sides should name the referee laboratory in advance. The catalog specification is on the product hub; the COA page lists the release tests; the stability page covers the pack and the store; the compliance page covers the market files; the MOQ glossary entry defines the term; the logistics page covers shipping and documents. ### 05 The regulatory file for vitamin K1 URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k1/compliance/ Reviewed: 2026-11-19 Vitamin K1 is phytonadione, CAS 84-80-0, and the paperwork around it is built around three things: the form, the destination and the finished-product route. The buyer's regulatory team confirms that route for each market. What follows is a description of the frameworks, the limits and the evidence a file should contain, so that the specification and the pack can be read against the same rules. It is a sourcing reference, not a label and not legal advice. In one lineOn a label vitamin K is a family name; the file has to show that the form, the source and the wording are the ones the destination permits. ## What the file contains Four questions organise a regulatory file. Which material and which specification revision is being bought? Which lot is being released, and what does its certificate say? Which limits and label rules attach to the finished product? And what has to be re-checked if the source, the process or the pack changes? The certificate answers the lot question, the technical data sheet answers the specification question and the safety data sheet answers the handling question; the route question is left for the operator. Two statements belong specifically to this product. The first covers isomerism: the certificate should give the trans share and a limit for the cis isomer, because a supplier who cannot state the geometry has not fully described the material. The second covers origin: phytonadione is made by synthesis rather than extracted from a plant, so any claim about plant-derived phytol needs evidence of its own. Residual solvents, allergens, GMO status, irradiation and animal-derived inputs complete the set, and each document should carry a version and a date. ## European Union Directive 2002/46/EC sets the positive list of vitamin and mineral substances and of the forms allowed in food supplements, and the vitamin K entry is written per form. Phylloquinone, the form sold here, is the name to check against the current consolidated text of Annex II. Labelling follows Regulation (EU) No 1169/2011 and the supplement particulars: amount per portion, percentage of the nutrient reference value, and the mandatory warnings. The reference value for vitamin K is 75 µg a day, as of this review. Contaminants fall under Regulation (EU) 2023/915, and the operator placing the product on the market carries the general food law duties set by Regulation (EC) No 178/2002. Two details decide the destination. National maximum levels and notification procedures for vitamins are not harmonised, so the member state matters as much as the union. And claim wording is fixed by Regulation (EU) No 432/2012, which leaves the label no room to improvise. ## United States For a supplement, the US file turns on the dietary ingredient and the Supplement Facts panel. Vitamin K is declared under that name with its form in brackets, for example “Vitamin K (as phytonadione)”, and the percentage is calculated against a Daily Value of 120 µg, as of this review. The supplier should be able to name the basis on which it regards the ingredient as a dietary ingredient and point to the evidence; the buyer then confirms that the basis fits the finished product and the claim. Adding the vitamin to a conventional food is a different exercise, with a different basis and a different label. The intended use has to be settled before documents are collected, because the two routes do not share a paper trail. ## Limits and the finished-product calculation Contaminant limits apply to the finished product, not to the bottle alone. The oil is used in very small amounts per serving, which keeps its contribution low, but the sum still has to be worked out and kept on file. Contaminant limits to check for the finished product | Parameter | Typical supplement reference | Evidence the file should hold | Lead (Pb) | 3.0 mg/kg in the supplement | The lot figure, the method, the limit and the summed product calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | The lot figure and any category exception the product relies on | Mercury (Hg) | 0.10 mg/kg in the supplement | The lot figure and the method that produced it | Arsenic (As) | No harmonised EU limit for supplements; the buyer sets one | The agreed limit, the method and the lot figure One calculation shows the scale. A softgel carrying 100 µg of vitamin K takes about 0.1 mg of oil, and even an oil sitting at the 3.0 mg/kg lead limit would contribute roughly 0.0003 µg to that softgel. The contaminant load of the finished product comes from its other ingredients. A carrier grade changes the arithmetic, because the powder mass per serving is much larger than the oil mass. ## Label and claims Nutrition and health claims sit under Regulation (EC) No 1924/2006 and the authorised list in Regulation (EU) No 432/2012. Vitamin K has entries in that list, each tied to a condition on the amount in the product; the source-of threshold is 15% of the 75 µg reference value, or 11.25 µg in the daily portion, as of this review. The wording is fixed, and the claim is reviewed apart from the certificate. In the United States the nutrient-content thresholds are 10% of the Daily Value for “good source” and 20% for “high”, which is 12 µg and 24 µg against 120 µg. Claim file and certificate are separate documents, and a disease-related claim falls outside the framework in both markets. The brand's reviewer signs off the final words. ## The documents - Specification naming the form and CAS number, with assay and method, refractive index and isomer lines. - Lot COA with the trans and cis figures and each heavy metal reported separately. - Technical data sheet and safety data sheet for the oil. - Residual-solvent statement for the synthesis, and the isomer statement. - Allergen, GMO, irradiation and animal-derived input statements. - Nutrition worksheet showing vitamin K per portion and the % NRV or % DV. ## Checklist before the first order - Phytonadione is named on the specification, not the family name vitamin K. - The form matches the current permitted list for the destination. - The certificate carries the isomer figure and the refractive index, not only the assay. - The contaminant figures have been converted to the finished-product dose. - The label and the claim match the authorised wording for the market. - Source, process and pack sit under change control, with versioned documents. Start with the product hub for the catalog specification, then the COA page for the lot certificate and the identity page for the analytical evidence. The level-four comparison explains the label difference between the two K vitamins; the quality page covers the release file; the regulatory notes carry the framework citations. ### 06 How we prove a vitamin K1 lot is phytonadione URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k1/identity/ Reviewed: 2026-11-19 A vitamin K1 lot is phytonadione when four measurements agree: the document names the form and the CAS number, HPLC retention and the UV spectrum match a phytonadione reference, the refractive index sits inside 1.525–1.528, and the trans share of the isomer figure is the one the specification states. The assay alone cannot separate the vitamin from a vegetable-oil blend or from a cis-rich synthetic lot. In one lineThree agreeing figures identify this oil: HPLC retention with the UV spectrum, a refractive index inside 1.525–1.528, and the trans share of the phytonadione. ## The four identity layers Naming the right material on paper is not the same as demonstrating it in the bottle. The four layers below answer four separate questions, and each one needs its own evidence. A supplier who stops at the first has shown the label, not the oil. Four layers of vitamin K1 identity | Layer | Question | Test | What it shows | Document | Is the form named? | Name, CAS number and formula | Only that the paperwork agrees | Chromatography | Is the quinone phylloquinone? | HPLC retention plus the UV/DAD spectrum | The molecule itself | Physical | Is the oil undiluted? | Refractive index at a stated temperature | Whether a triglyceride has been added | Isomer | Which geometry was bought? | trans and cis by HPLC | That the specified isomer is present ## The ratio that proves the material Vitamin K1 has no counter-ion, so there is no sodium-style check to fall back on. The equivalent evidence is the ratio between the trans and cis isomers, supported by the refractive index. The double bond at C2′–C3′ of the phytyl chain can take either geometry; the natural form is trans, the synthesis produces both, and the purification decides how much cis survives. A cis-rich lot has the same UV spectrum, a retention time close to the trans peak and an assay inside the window, so the isomer ratio is the figure that shows which geometry is in the bottle. The refractive index works as a second ratio. A triglyceride carrier oil sits near 1.47, so a blend moves the measured value below 1.525 in proportion to the diluent. A value of 1.523 is not a rounding error; it is a signal that the bottle is not neat oil. Measure at a stated temperature, because the value drifts with the prism. The mass balance closes the picture: assay plus related substances plus water should account for the whole sample, and an unexplained gap points at an unmeasured component. Ask for the peak list, not only the main peak, because the small peaks are where the history of the lot is written. ## Why X-ray diffraction has no role here X-ray diffraction needs a lattice to scatter from. Phytonadione is a liquid at room temperature, so there is no pattern to collect and no reference pattern to compare against. A certificate that reports “XRD conforms” for a vitamin K1 oil has added nothing to the file. The technique does have a place one step away. On a carrier powder, diffraction describes the carrier: it separates a crystalline carrier from an amorphous matrix, and it says nothing about the vitamin dispersed in it. On a crystalline menaquinone it is a genuine solid-form test. For this oil the solid-state question does not exist, and an identity plan that relies on XRD has misread the material. ## What adulteration looks like Common vitamin K1 substitutions and the signals | Adulterant | What it does | Signal | Test | Vegetable-oil diluent | Cuts the vitamin per gram while keeping the colour | Refractive index below the window; assay low; fatty acids present | Refractive index, assay, GC fatty-acid profile | Cis-rich synthetic lot | Same UV and colour; wrong geometry | trans share below the agreed figure | HPLC peak list | Menadione substitution | A different naphthoquinone with no phytyl chain | Different retention; different UV fine structure | HPLC/UV, mass spectrometry | Menaquinone substitution | A K2 molecule with a longer chain | Different retention and molecular weight | HPLC/UV, mass spectrometry | Water or haze | Poor closure or condensation | Haze in the oil; water figure elevated | Appearance, Karl Fischer Colour is the weakest signal. A yellow to amber oil is easy to imitate, and the appearance window is wide enough to hide a blend. The stronger signals are the refractive index, the isomer ratio and the fatty-acid profile. A certificate that stops at appearance and assay has not tested the substitution most likely to occur. ## How to write identity into the specification - “Vitamin K1 (phytonadione, phylloquinone), CAS 84-80-0, C31H46O2.” - “Assay 97.0–103.0% by HPLC, on the oil as received.” - “Identification by HPLC retention plus the UV spectrum against a phytonadione standard; chromatogram on request.” - “Refractive index 1.525–1.528, with the temperature of the measurement stated.” - “trans-isomer share stated; cis-isomer limit agreed; both reported per lot.” - “No triglyceride diluent; fatty-acid profile on request.” - “Destination market and form confirmed before the order.” ## Five questions for the supplier - What form is this lot, and what CAS number is printed on the certificate? - Will you send the chromatogram and the UV spectrum, rather than the assay figure alone? - What is the trans share, and what limit applies to the cis isomer? - What refractive index was measured, and at which temperature? - In a dispute, would you test the retained sample jointly with us? Five straight answers add up to an identity file. One assay figure never will. The product hub carries the catalog specification; the COA page shows where each figure sits on the certificate; the grades page compares the oil with the carrier and blended grades; the level-four comparison covers the K2 alternative; the methods library explains the separations behind these figures. ### 01 What the COA for vitamin K2 MK-4 actually contains URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k2-mk-4/coa/ Reviewed: 2026-11-19 An MK-4 certificate reports appearance, an HPLC identification against a menaquinone-4 reference, the assay, loss on drying, the heavy-metal panel, microbiology and particle size. The catalog range is 98.0–102.0% by HPLC with loss on drying at or below 0.5%, and those are release limits; the batch COA is the document that shows what one pack measured. Two lines that matter for this molecule are often missing from a generic vitamin K certificate: the menadione limit and the other menaquinones. In one lineA menaquinone-4 assay of 98–102% proves the material is concentrated; the menadione limit and the loss on drying prove what else is in the powder. ## The certificate as a test report Each line needs a measurable subject, a named method and the limit it was judged against. For an isolated menaquinone the sheet describes one substance, so the assay window and the impurity lines carry the weight. Identity, assay and contaminants · vitamin K2 MK-4 | Parameter | Method | Release limit | Appearance | Visual | Yellow, free-flowing crystalline powder | Identification | HPLC retention and UV spectrum | Conforms to the menaquinone-4 reference | Assay | HPLC with UV detection | 98.0–102.0% | Loss on drying | Gravimetric | ≤0.5% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 40 mesh The catalog does not carry a menadione line, because release is against the assay and the contaminant panel. Menadione is the starting material in the synthetic route, so it is the first impurity a buyer should ask about; a limit can be agreed, added to the specification and reported on the lot certificate. The same is true of a total related-substances limit and of a melting range. ## The assay, its basis and what 100% means The assay is a purity figure for the isolated material. It is measured against a menaquinone-4 reference by HPLC, and 100% means the peak response matches the reference, not that the powder contains nothing else. The 98.0–102.0% window is a two-sided gate around that reference, wide enough to hold the water, the residual solvent and the minor menaquinones left after crystallisation. The basis has to be stated. The catalog range carries no basis line, so the certificate should say whether the result is on the material as sold or on the dried material. At 0.5% loss on drying, a 99.0% dried-basis result is about 98.5% as sold; both sit inside the window, but a reader comparing the two figures without the basis would see a half-point drop that never happened. Do not read 98–102% as a concentration in a blend. A 1% trituration of MK-4 on a carrier would report 1.0%, and its certificate would describe a different material with a different label and a different fill weight. The same number on two sheets can mean two products, so the grade belongs on the purchase order. ## Release limit versus batch result A release limit marks the edge of acceptance. The batch result is a measurement from one lot. The two belong in separate columns, with the method named beside them. If the result column simply repeats the range, the sheet has copied its own gate instead of reporting a measurement. What the result column should contain | Parameter | Release limit | Result column | Assay | 98.0–102.0% | A measured percentage, with the basis and the method | Loss on drying | ≤0.5% | A measured percentage | Heavy metals | Per element | A figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot | Particle size | ≥95% through 40 mesh | The measured percentage through the sieve | Menadione, if agreed | An agreed limit | The measured figure and the method “Passes specification” is the conclusion, and the numbers above it should carry the reader there: a count and an absence statement for microbiology, a figure per element for heavy metals. ## What moves between batches Synthesis, crystallisation and drying move most of the lines. Colour shifts between yellow and orange-yellow inside the same specification, the assay settles where the crystallisation put it, loss on drying follows the drying step, and particle size follows the mill and the sieve. The 40 mesh figure is a finishing control, so it can change when the mill changes without any change in the chemistry. Melting behaviour is the line that surprises people. The isolated material has a low melting range for a crystalline solid, reported around 35–38 °C, so a sample that has been warm can look waxy, glossy or caked while its assay and impurity profile are unchanged. Read a caked sample as a thermal event: warm it gently and re-test a sub-sample before rejecting the lot. The same property explains why a warm loading bay is a storage risk for this material. One result near an edge matters less than the direction across several lots: assay drifting low, loss on drying climbing, or a new peak in the chromatogram. The lot code printed on the sheet has to be the one on the pouch, the drum and the sample kept back from the lot. ## When an outside laboratory is worth it Order an independent test for a new supplier, a first shipment to a regulated market, a disputed assay, a menadione question, or a solid-form question. The useful panel is HPLC with UV spectrum and a menaquinone-4 standard, related substances including menadione, loss on drying, ICP-MS for the heavy-metal panel, and the microbiology suite. Add XRD or differential scanning calorimetry when the question is the solid form, and LC-MS when another menaquinone is suspected. Ask the laboratory for its detection limit on each screen; a “not detected” line without a limit describes the method, not the sample. The referee should test the sample that was retained, and the report should name the lot. ## What to put side by side Seven lines make the comparison: form and CAS number, assay and basis, HPLC identification with the UV spectrum, menadione and related substances, loss on drying, contaminants and microbiology, pack and lot code. Two quotations that agree on 99% but differ on the menadione line or the assay basis are not describing the same material. Traceability is the other half of the comparison. The sheet should identify the manufacturer, name the synthetic route and describe the crystallisation, drying and milling steps behind the lot. The catalog ranges are listed on the MK-4 product page, and the release workflow is described on the quality page. For the grade question see the grade page; for light and heat, the stability page; the separation itself is explained in the methods library. ### 02 Crystalline, oil or diluted: choosing a vitamin K2 MK-4 grade URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k2-mk-4/grades/ Reviewed: 2026-11-19 Vitamin K2 MK-4 is supplied as an isolated crystalline powder at 98.0–102.0%, as an oil solution, and as a diluted powder on a carrier. The catalog carries the powder and, on request, the oil; a dilution is a separate material with its own specification and label. The grade changes the weigh-up at a 5–45 mg dose, the capsule fill and the stability file, so it is a specification decision before it is a commercial one. In one lineThe MK-4 grade is a weighing decision: at a 45 mg dose the isolated powder is the only practical form, and at a microgram dose the pure material cannot be weighed. ## Why the grade is a weighing decision first An MK-4 label dose is written in milligrams, not micrograms. A 45 mg capsule carries about 46 mg of the 98% powder, which is a normal fill component; the same dose from a 1% dilution would need 4.5 g of powder and would not fit in a capsule at all. At the other end, a 100 µg dose is 0.102 mg of the pure material, a mass too small to weigh reliably and too small to spread evenly through a blend. The grade is therefore chosen from the balance and the filling line first: what mass carries the label dose, and can that mass be blended and filled evenly? The concentration on the certificate follows from that choice. An order that names only MK-4 does not say which of the three is meant. ## Three forms, one molecule Vitamin K2 MK-4 grades and where each fits | Form | MK-4 content | Matrix | Status | Usual fit | Isolated crystalline powder | 98.0–102.0% | None | Catalog | 5–45 mg capsules and tablets; oil blends | Oil solution | Agreed and declared | Food-grade carrier oil | On request | Softgels, oil drops, oily premixes | Diluted powder | Agreed and declared | Carrier | Separate specification | Microgram to 1 mg doses; dry blends The isolated powder is the reference point and the form this catalog carries as standard. It is a single substance, so the assay range describes purity rather than concentration. The oil solution is the same molecule dissolved in a declared fat; it suits a softgel or a drop and adds the oil to the label and to the stability file. A diluted powder is the mirror image: a low concentration on a carrier, built for doses where the pure material is too small to weigh. The three forms are not interchangeable by weight. A formulation written for the 98% powder cannot switch to a 1% dilution without the fill weight changing by a factor of about a hundred, and the label, the capsule size and the stability file changing with it. ## What the powder is like to handle The catalog form is a yellow, free-flowing crystalline powder at 40 mesh, with loss on drying at or below 0.5%. That low moisture limit reflects a crystalline solid rather than a spray-dried matrix. The material is practically insoluble in water and soluble in fats and organic solvents, which is why an oil solution is a natural second format. The handling property that catches people is thermal. The isolated material has a low melting range for a crystalline solid, reported around 35–38 °C, so a drum left in a warm loading bay can soften, gloss over or cake. The assay does not change, but the powder's flow does, and a caked lump is hard to disperse again. Store the pack cool and dry, and let it equilibrate before opening after cold storage. Light is the second handling fact. The material is light-sensitive, so the pack has to be opaque and the container closed between uses. A clear jar on a bench is an exposure, not a storage container. Particle size is a finishing choice: a coarser or finer powder can be agreed, and the sieve line moves with it. ## From a label dose to a weighable mass A label dose counts the menaquinone, not the powder that carries it. Divide the dose by the assay to get the pure-material weigh, or by the dilution factor to get the premix weigh. At 98% the difference is small; at 1% it is a hundredfold, and that number decides whether the grade fits. MK-4 dose converted to isolated powder and to a 1% dilution | Label dose | Isolated powder at 98% | 1% dilution | What the number means | 45 mg | 45.9 mg | 4.5 g | A capsule fill; the dilution does not fit | 15 mg | 15.3 mg | 1.5 g | A standard capsule strength | 5 mg | 5.1 mg | 510 mg | A small capsule or a tablet blend | 1 mg | 1.02 mg | 102 mg | A dilution blends more evenly | 100 µg | 0.102 mg | 10.2 mg | The pure weigh is below a production scale The figures are the stoichiometric minimum; overage and the rest of the fill sit on top. The bottom of the table is where a grade runs out of room. The isolated powder is comfortable from 5 mg upward and workable at 1 mg; below that, the weigh becomes the problem and a dilution is the practical answer. An oil solution is chosen for the dosage form rather than for the dose: a softgel or a drop needs a liquid, and the concentration is agreed with the order. ## What to write into the specification - “Menaquinone-4 (MK-4), CAS 863-61-6, C31H40O2, isolated crystalline powder.” - “Assay 98.0–102.0% by HPLC; identification by HPLC retention and UV spectrum.” - “Loss on drying ≤0.5%; heavy metals and microbiology as listed; ≥95% through 40 mesh.” - “Menadione limit and related substances, if agreed, with the method and the limit.” - “Storage below 25 °C, protected from light, in the sealed pack.” - “Grade named as the isolated powder, the oil solution or the dilution, with the concentration.” For an oil solution, add the carrier oil, the MK-4 concentration, any antioxidant and the pack. For a dilution, add the carrier, the concentration, the carrier's own specification and the blend uniformity test. The grade name on the purchase order should match the specification. ## When the other form is the wrong choice The dilution is wrong when the label declares 45 mg, because the fill becomes grams. The isolated powder is wrong for a microgram dose, because the weigh is too small to control. The oil is wrong when the label cannot declare the carrier oil or when the market expects a powder. Each of these is a change of material, not a change of supplier. A switch needs a new specification, a new label check and, for a regulated market, a fresh look at the route. The catalog ranges sit on the product page, and the certificate lines are unpacked on the COA page; the ordering unit is on the MOQ page. For the choice between the two menaquinones, read the MK-4 and MK-7 comparison; the separation is described in the methods library. ### 02.1 MK-4 vs MK-7: dose, label and the market file URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k2-mk-4/grades/mk-4-vs-mk-7/ Reviewed: 2026-11-19 MK-4 and MK-7 are the same vitamin K family with side chains of four and seven isoprene units: C31H40O2 at about 444.66 g/mol and C46H64O2 at about 649.02 g/mol. The chemistry differs by two isoprene units; the practical difference is the dose. MK-4 is used at 5–45 mg, MK-7 at 90–180 µg, a gap of 250 to 500 times, and that gap drives the grade, the label, the analytical method and the market file. In one lineMK-4 and MK-7 are the same vitamin K2 family at doses several hundredfold apart, so the form, the label and the market file change together. ## Two side chains, one ring Both molecules share the methylnaphthoquinone ring that makes them vitamin K2. What differs is the polyisoprene side chain: four units in MK-4, seven in MK-7. Each unit adds C5H8, so the longer chain raises the molecular weight by about 204 g/mol, makes the molecule more lipophilic and moves it later on a reversed-phase column. Both are fat-soluble, practically insoluble in water and sensitive to light. Menaquinone-4 and menaquinone-7 side by side | Property | MK-4 | MK-7 | Formula | C31H40O2 | C46H64O2 | Molecular weight | About 444.66 g/mol | About 649.02 g/mol | Side-chain units | Four isoprene units | Seven isoprene units | CAS number | 863-61-6 | 2124-57-4 | Identity marker | Menadione and related substances | all-trans and cis isomer ratio | Usual commercial grade | 98% crystalline powder | 1% spray-dried powder A longer chain is not a higher grade; the two are separate materials with separate specifications. A certificate written for one homologue does not release the other, and each method needs its own standard and impurity profile. ## The dose is where the difference becomes practical MK-4 doses sit in milligrams and MK-7 doses in micrograms. A 45 mg MK-4 capsule and a 90 µg MK-7 capsule both say “vitamin K2”, and the first carries 500 times the mass of the second. There is no official conversion factor that turns one into the other; the molecular-weight ratio of about 0.685 converts mass on a molar basis, not a dose. The same declaration in two menaquinones | Figure | MK-4 | MK-7 | Usual daily dose | 5–45 mg | 90–180 µg | The 45 mg dose in micrograms | 45,000 µg | 90 µg is the low end | Share of the EU reference value (75 µg) | 60,000% | 120% | Pure menaquinone needed | 45.9 mg at 98% | 0.093 mg at 97% | Weight of the usual grade | 45.9 mg of powder | 9 mg of 1% powder The last two rows explain why the grades differ. A 45 mg MK-4 dose is weighed as tens of milligrams of the isolated powder, which is a normal capsule fill. A 90 µg MK-7 dose is 0.09 mg of the pure material, which is not weighable on a production line, so MK-7 is normally supplied as a 1% powder and the dose becomes 9 mg of powder. The grade follows the dose, not the other way round. The label percentage follows the same arithmetic. At 45 mg, an MK-4 product would declare 60,000% of the EU vitamin K reference value; at 90 µg, an MK-7 product declares 120%. That is not a formatting problem. It is a signal that the two products sit at different dose levels and may sit under different regulatory routes. ## Source and the impurity that follows it The commercial MK-4 is a synthetic menaquinone. Menadione is the starting material, and the side chain is built onto it, so residual menadione and related substances are the impurities to specify. MK-7 is supplied from a synthetic route or from Bacillus subtilis fermentation, including the natto strain; its characteristic quality question is the all-trans to cis ratio, because the long chain can isomerise. That difference reaches the specification. An MK-4 specification needs a menadione limit and a related-substances limit; an MK-7 specification needs an all-trans floor, a cis ceiling and a limit for other menaquinones. A supplier who sends one certificate for “vitamin K2” has not said which of the two materials was made, and the impurity profile is the quickest way to tell. ## What the label has to say In the EU, the MK-7 ingredient is named “Menaquinone” or “Vitamin K2” under the novel-food entry, while an MK-4 ingredient is labelled under the vitamin rules for the destination; the form still has to be declared. In the US, the Supplement Facts panel carries the form in parentheses: “Vitamin K (as menaquinone-4)” or “Vitamin K (as menaquinone-7)”. In both markets the amount is a mass of the named menaquinone, in micrograms. “Vitamin K2” on its own names neither. A label that says only vitamin K2 leaves the form to the ingredient list, and a label that names MK-7 while the certificate reports MK-4 has an error on the label before it has one in the drum. The carrier or the oil belongs in the ingredient list, not in the name of the vitamin. ## The entry names MK-7, not MK-4 The EU Union list entry for vitamin K2 (menaquinone) is built on MK-7: 97–102% MK-7, at least 92% all-trans and no more than 6.0% cis isomers. Its specification describes the homologous series, but the authorised material and the limits are set for MK-7; the route for an MK-4 ingredient is a separate question for the buyer's regulatory team. In the US, the dietary-ingredient basis is ingredient-specific, and the supplier should say whether the ingredient was on the US market before 15 October 1994 or is backed by a notification. The UK checks its own retained list. Japan is the market with the longest MK-4 record: menatetrenone is dosed there at 45 mg per day as a medicinal product, and the food and supplement routes are separate. That dose level is the clearest illustration of the gap between the two menaquinones, and it is not interchangeable with an MK-7 supplement dose. ## What changes when you switch A switch changes the specification, the reference standard, the impurity profile, the dose, the label, the pack and the market file. A 1 kg pouch of 98% MK-4 carries about 980 g of the menaquinone; a 1 kg pouch of 1% MK-7 carries about 10 g. The same pack size is a different quantity of active material, and the dose count differs with it. A switch deserves a new specification and a new label review, not an amended purchase order. Write a new specification, check the label against the destination, and confirm the route before the first order. The MK-4 product page carries the specification, the MK-7 product page the sister material, and the vitamin K1 page the phylloquinone case. For the grade decision see the MK-4 grade page; the separation is described in the methods library and the release file on the quality page. ### 03 MK-4 is light- and heat-sensitive; the pack sets the shelf life URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k2-mk-4/stability/ Reviewed: 2026-11-19 Menaquinone-4 is a light-sensitive, low-melting solid. The isolated powder is most stable in a sealed, opaque pack at a cool temperature; an oil solution and an emulsion add oxidation and heat to the list. Shelf life is assigned from data for the exact pack and matrix, not from the certificate. In one lineMenaquinone-4 is a low-melting, light-sensitive solid, so the pack and the storage temperature decide more of the shelf life than the molecule does. ## The powder in the sealed pack The catalog sets loss on drying at or below 0.5%, which is a release gate rather than a storage allowance. A crystalline solid with that little water picks up moisture slowly, but the pack still has to keep it out: an opened pouch in a humid room will gain water at the surface, and the as-is assay falls as the moisture rises. The standard packs are a 1 kg foil pouch and a 25 kg fiber drum with a food-grade liner; both block light while they stay closed, and both fail at the seal or the liner. Heat is the more specific problem. The isolated material has a low melting range for a crystalline solid, reported around 35–38 °C, so a drum left in a warm loading bay or a pouch stored above a heater can soften, gloss over or cake even when the moisture is low. A cool, dry, dark store is the practical instruction, and cold storage is common for the isolated material; let the pack equilibrate to room temperature before opening so that condensation does not form on the powder. A clear jar on a bench is an exposure, not a storage container. ## Oil, softgel and emulsion MK-4 is practically insoluble in water and soluble in fats and organic solvents, so an oil solution is a natural format and a softgel is a natural pack. The oil introduces its own stability file: the carrier oil can oxidise, its peroxides can attack the menaquinone, and light passes through many oils and through a clear softgel shell. Specify the oil, its peroxide value and any antioxidant, and use an opaque shell with a controlled headspace. The low melting point also changes the process. A warm oil dissolves the material readily, and the same solution can throw crystals on cooling if the concentration is close to saturation; a fill that is clear at 40 °C is not necessarily clear at 20 °C. Check the concentration at the temperature the fill will actually see, and check the softgel seam and fill appearance after storage. An emulsion is the least stable format. Water, oil, light, oxygen, heat and pH act at once, and a pasteurisation or hot-fill step adds a heat load the bulk powder never meets. If a drink is unavoidable, protect it from light, control the dissolved oxygen and the pH, and validate the hold time in the finished matrix rather than on the bulk powder. ## What drives the loss Degradation routes for menaquinone-4 and the controls that address them | Factor | What it does | Control | Light | Photodegradation; colour and assay change | Opaque foil or drum liner; dark store | Heat | Softens and cakes the powder; accelerates oxidation | Store below 25 °C; cool process; short heat exposure | Oxygen | Oxidises the quinone ring, especially in oil | Sealed pack; low headspace; declared antioxidant | Moisture | Raises loss on drying and lowers the as-is assay | Sealed pack; dry store; reseal after opening | Alkali and metals | Attack the quinone in an emulsion or a wet matrix | Check pH; avoid iron and copper contact The routes reinforce one another. A store that is warm, bright and humid at once is worse than three separate problems, and an oil in clear glass combines light and oxygen in the same container. The question worth asking is not whether MK-4 is stable, but for how long in this pack, at this temperature. ## A stability protocol for the ingredient A protocol is useful when it fixes the pack, the condition, the time points, the tests and the acceptance limits before the first sample is charged. A warehouse is covered by a long-term condition of 25 °C and 60% relative humidity plus an intermediate condition of 30 °C and 65% relative humidity; an accelerated run at 40 °C and 75% relative humidity puts pressure on the pack. A light arm on the ICH Q1B design covers what a dark incubator cannot. Test assay, related substances including menadione, loss on drying, appearance and microbiology at each point, and add the melting range when the solid form matters. In an oil, add the peroxide value and the fill appearance; in an emulsion, add the droplet size and the pH. The report should carry the individual figures rather than a pass line, and name the pack and the lot family. The summary should describe the pack you are actually buying. The drum and the pouch differ in headspace and in how often they are opened, and a softgel is a different subject again. ## The finished formula changes the answer Capsules and tablets keep water activity low, but the excipients can still pass moisture, and a fill that contains a low-melting material can soften if the product is stored warm. Check the appearance of the fill at release and after storage, not only the assay. An opaque shell or an opaque film coating is a simple barrier that is easy to specify and easy to audit; a clear capsule gives light free access to the powder. A gummy adds the heat of cooking and a water activity that a capsule does not have. Adding the MK-4 late in the process reduces the heat exposure, but the finished matrix still has to be tested. An overage is a label and stability decision; it does not repair a pack that lets light or moisture in. ## How the shelf life is set No single shelf-life number applies to MK-4, because the pack, the temperature and the matrix set it. The assigned retest period belongs on the specification, with the stability file for that pack behind it. Without the pack, the condition and the test panel, a number is an assertion rather than a shelf life. When the retest period ends, re-test the retained sample before extending the date. An extension by assumption, or a bulk figure applied to a repacked container, is not supported. Once a 1 kg pouch is opened, the remainder sees a different environment; split it into smaller opaque units for a long campaign and reseal it properly. Pack options and the specification are on the product page. The COA page lists the release tests and the MOQ page the ordering unit; the assay is explained in the methods library and the release workflow on the quality page. ### 04 Vitamin K2 MK-4: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k2-mk-4/moq/ Reviewed: 2026-11-19 The minimum order for vitamin K2 MK-4 is a 1 kg foil pouch, with a 25 kg lined fiber drum as the production pack. The standard 98% powder is quoted at 1–7 days from a released lot; the count starts once the specification and the order match. A quotation needs the grade, the quantity and pack, the destination and Incoterm, the documents, the intended market and any additional test. In one lineThe 1 kg pouch is the smallest unit that carries its own lot code, certificate and retained sample, and at a 45 mg dose it is still a real trial quantity. ## Why the minimum is 1 kg One kilogram of the 98% powder carries about 980 g of menaquinone-4, or 980,000 mg. At a 45 mg dose that is roughly 21,700 doses before overage, at 15 mg about 65,000, and at 5 mg close to 196,000. That is a pilot batch or a first production run, not a sample tube, which is why 1 kg is a working unit for this product rather than an arbitrary threshold. The comparison with the sister product is useful. A 1 kg pouch of a 1% MK-7 powder carries about 10 g of MK-7, which is roughly 100,000 doses at 100 µg. The pack is the same and the dose count is not, because the MK-4 dose is measured in milligrams. A buyer who is used to microgram-dose materials should check the dose count before assuming that 1 kg is a large quantity. Under 1 kg, the usual practice is to split a larger lot and repack it. Repacking adds a handling step, breaks the link to the original pack and weakens traceability, while the chemistry stays the same. The minimum is a traceability unit, not a volume incentive. ## The standard packs Packs for vitamin K2 MK-4 | Pack | Net content | Typical use | Handling | Foil pouch | 1 kg | Sample, qualification, pilot batch | Reseal between uses; keep cool, dry and dark | Fiber drum with liner | 25 kg | Production batch | Keep the liner closed; store away from light and heat | Oil solution | Agreed | Softgel or drop fill | Declared concentration and carrier oil; protect from light | Custom pack | Agreed | Line trial or a specific filling line | Agreed with the order; check the seal and the closure The label on the pack belongs to the lot: product, grade, lot code, net content and storage statement. That code ties the pack to its certificate and to the retained sample; without it, the certificate describes a product rather than a lot. The pouch is not a dispensing pack for a long campaign, and the drum is not a storage silo: both should be closed after each withdrawal. ## Lead time and what moves it The standard powder is quoted at 1–7 days. The window covers release, packing and dispatch, and stops at the handover to the carrier; transit is outside it. A custom particle size, an oil solution, a non-standard pack or a market-specific document set moves the date, and the offer should say so on its own line. Get the dispatch date as well as the lead time. The drum usually moves on a pallet, the pouch as a parcel, and the Incoterm decides who books the freight and who handles clearance. Because the material is sensitive to light and heat, the transit instruction should be written into the order. ## What a quotation needs Details that make a quotation usable | Detail | Why it changes the offer | Product and grade | The isolated powder, an oil solution and a dilution are different materials | Quantity and pack | The 1 kg pouch and the 25 kg drum are different units and handling | Destination and Incoterm | Freight, documents and responsibility change with the route | Documents | COA, TDS, SDS, allergen, GMO and origin statements are separate items | Label market and dose | The market decides the name, the units and the route | Additional tests | A menadione limit or a melting range is a different release protocol With these six details an enquiry can be answered as a specific offer. An enquiry that says only “vitamin K2” will produce a range, because the supplier has to guess which menaquinone, which grade and which market file the buyer means. ## The sample is a lot, not a demonstration Qualification starts from the 1 kg pack: run identity, assay, loss on drying and microbiology before scaling up, and keep back a sample from the same pack. The lot code should read the same on the sample, the COA and the offer. A sample with no lot behind it demonstrates a product; it does not qualify a batch. Ask for the sample in the same pack material as the commercial pack, because a clear bag says nothing about how the foil pouch behaves. For MK-4, also record how the sample was stored: a pouch that spent a week in a warm vehicle may arrive caked, and that is a handling event rather than a specification failure. ## Terms to settle before the first order Commercial terms, the Incoterm, the pack, the lead time and the documents are all part of the offer. Quality terms sit next to the commercial ones: which specification revision applies, a COA for every lot, the retained sample, the retest period and the route for a change. It is easier to agree the quality terms before the first production order than after the first dispute. Replacements and returns are governed by the offer and the quality agreement. A failed lot is resolved on the retained sample with a joint re-test, not from a photograph. Settle in advance who commissions the referee test and which laboratory both sides accept. Before the first order, read the product page for the specification and the COA page for the release lines. The compliance page covers the market file, and the quality page explains how a lot is released. ### 05 Where vitamin K2 MK-4 is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k2-mk-4/compliance/ Reviewed: 2026-11-19 Permission for vitamin K2 MK-4 is not the same question as permission for MK-7. The EU novel-food entry for vitamin K2 is written around menaquinone-7; MK-4 is a different substance, sold at doses hundreds of times higher, and the food-supplement, food-additive or medicinal route for the destination has to be confirmed by the buyer's regulatory team. This page sets out the checks, the limits and the documents that belong in the file. In one lineThe vitamin K2 novel-food entry is written around menaquinone-7, so the route for an MK-4 ingredient has to be confirmed for the destination before the label is written. ## Four checks, not one A regulatory file is more than a certificate in a folder. It has to answer four separate questions. Is the substance, at this dose, allowed a route into the market? Does the lot meet the specification that route names? Does the label carry the permitted name, unit and declarations? And is each claim on the pack allowed for this ingredient and this market? Answer only the second and the file proves a lot, not a market. Any one of them can fail on its own, and for MK-4 the first carries extra weight. At a 45 mg daily dose the product is far above the microgram levels of a typical vitamin K supplement, and a destination may apply a different route to that dose. The form, the source and the dose all belong in the question, not only the name on the certificate. ## European Union Regulation (EU) 2017/2470 establishes the Union list of novel foods. The entry for vitamin K2 (menaquinone) is built on menaquinone-7: its specification sets 97–102% MK-7, with at least 92% all-trans and no more than 6.0% cis isomers, and it describes the homologous series, including the MK-4 formula. What that means for an MK-4 ingredient — whether it can rely on the entry or needs another route — is a question for the buyer's regulatory team, answered against the current consolidated text rather than this summary. The food-supplement framework is separate. Directive 2002/46/EC lists vitamin K among the vitamins that may be used and sets out the permitted forms in its annexes; the current text and the destination member state's implementing rules decide whether the form supplied can be sold as a vitamin in a supplement. The novel-food catalogue and any national position on the specific substance belong in the file as well. For a 45 mg dose, the label's percentage of the nutrient reference value is also part of the review: the EU reference value for vitamin K is 75 µg, so 45 mg is 60,000% of it. ## United States In the United States, MK-4 sits in the dietary-supplement market under DSHEA. The supplier should say whether the ingredient was on that market before 15 October 1994, or whether a new dietary ingredient notification supports it; the buyer confirms that the basis covers the finished product. Manufacturing falls under the dietary-supplement cGMPs (21 CFR 111); the panel format is set by 21 CFR 101.36. Vitamin K is declared in micrograms on that panel, so a 45 mg dose appears as 45,000 µg. That is a unit conversion, not a different dose, and it is the kind of figure a reviewer notices. A structure/function statement needs the DSHEA disclaimer and must not be a disease claim. ## United Kingdom Great Britain keeps its own retained novel-food list, held by the Food Standards Agency, and its own food-supplement and labelling rules. The GB list started from the EU list but can diverge as each side amends its text, so a GB check is a separate check. Northern Ireland applies EU rules under the Windsor Framework; a GB-only review does not cover a product sold in Belfast or shipped across the border. ## The limits in the file Catalog release limits that support the compliance file | Parameter | Catalog limit | What the file should show | Heavy metals | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Measured result per element, method, and the finished-product calculation | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Method and count for the lot | Loss on drying | ≤0.5% | Measured value and its basis | Particle size | ≥95% through 40 mesh | Sieve method and measured percentage The table lists catalog release limits; it does not claim that every market sets the same legal ceiling. Each destination sets its own ceilings, some categories are tighter than others, and the finished-product figure depends on the daily dose. The certificate carries the measurement; the file shows where that measurement sits against the limit for the finished product. ## Where the claim boundary sits In the EU, Regulation (EC) No 1924/2006 and the EU Register control nutrition and health claims. A wording may be used only when it appears on the Register, matches its conditions of use and stops short of a disease claim. The Register does carry vitamin K entries, but none is reproduced here and none is relied on; the brand's own reviewer decides whether a wording is available for its product and dose. “Menaquinone-4”, “MK-4” and the assay figure are specification terms, not claims. In the US the claim review follows the structure/function boundary, with the DSHEA disclaimer and no disease claim. Permission for a wording in one market does not travel to the next. ## The document set Documents a brand should hold for an MK-4 lot | Document | What it should establish | Certificate of analysis | Lot code, assay and basis, contaminants, microbiology | Specification | The release limits the certificate is judged against | Technical data sheet | Grade, solubility, particle size, pack and storage | Safety data sheet | Handling, transport and storage classification | Allergen and GMO statements | Carrier or oil source, and any declaration the market requires | Source statement | The synthetic route, the starting material and the manufacturing site | Regulatory position statement | How the ingredient maps to the route relied on for the destination ## A short checklist - Does the file name menaquinone-4, the CAS number and the grade? - Does the certificate meet the specification on its stated basis? - Is the route confirmed for the destination and the daily dose? - Is the label using the permitted name and unit for that market? - Is the 45 mg dose expressed correctly on the panel? - Is every claim on the pack permitted for this form and market? - Is the same lot code on the COA, the pack label and the retained sample? A file is only as good as the lot behind it, so keep the certificate, the label and the retained sample together. The specification is on the product page, the certificate on the COA page and the identity evidence on the identity page. The vitamin K1 page shows the phylloquinone case, and the quality page covers release. ### 06 How we prove a vitamin K2 MK-4 lot is menaquinone-4 URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k2-mk-4/identity/ Reviewed: 2026-11-19 A menaquinone-4 lot (CAS 863-61-6, C31H40O2) is identified by four agreeing lines: the document and lot chain, HPLC retention and UV spectrum against a menaquinone-4 standard, the menadione and related-substance profile, and the mass balance with loss on drying. The assay percentage is the headline; the menadione line is the one that separates a clean synthesis from a crude one, and a melting range is the simplest second check on the solid form. In one lineA menaquinone-4 lot is proved by the chromatogram, the menadione limit, the melting range and the mass balance, not by the assay percentage alone. ## The four identity layers Naming the material correctly is not the same as proving it. The four layers below are separate questions, and each needs its own evidence. The first layer alone describes a document; it says nothing about the solid in the drum. Four layers of menaquinone-4 identity | Layer | Question | Evidence | What it proves | Document | Is the form and grade named? | CAS number, formula, grade, lot code | Paperwork only | Chromatography | Is the peak menaquinone-4? | HPLC retention, UV spectrum, reference standard | The molecule | Impurity | What was left from the synthesis? | Menadione and related substances | The quality of the route | Thermal and mass balance | Is it the crystalline solid, and do the numbers close? | Melting range or DSC; assay, loss on drying, impurities | Solid form and consistency Colour is not one of the layers. Yellow to orange-yellow covers a wide range, and a colour can be matched by a dye or by a different menaquinone. The stronger signals are the retention time, the UV spectrum, the menadione figure and the mass balance. ## The ratios that matter: menadione, homologues and absorbance The assay window is two-sided, 98.0–102.0%, and a result above the window is as much a question as one below it. A high result can point to a different reference standard, a different menaquinone, or a peak that the method integrated as one substance when it was two. The ratio to look at first is menadione to menaquinone-4. Menadione is the starting material in the synthetic route, so a residue is the expected impurity; report it as a percentage of the material or as a peak-area ratio, but say which, because the two numbers are not interchangeable. The menaquinone series is the second ratio. MK-4 is the shortest of the commercial menaquinones, and on a reversed-phase column it elutes before MK-7 and the longer homologues. A standard mix separates them by side-chain length, and the relative retention against an internal standard is a useful check when a menaquinone-4 reference is not available. A line that reads “MK-4 ≥98%” and nothing else leaves the homologue profile open. The third ratio is in the ultraviolet. The naphthoquinone chromophore gives a spectrum with several maxima, and the ratio of absorbances at two of them is a second dimension beyond retention time. The method should name the detection wavelength and report the spectrum; a retention time without a spectrum leaves half the identification unshown. ## X-ray diffraction and the solid form X-ray diffraction asks about the solid rather than the molecule: is the powder crystalline, and does the pattern match a reference? The 98% material is a crystalline powder, so a pattern is expected; a dilution on a carrier is dominated by the carrier, which is why XRD cannot confirm MK-4 in a 1% powder without a concentration step or a different method. XRD can also compare lots from two sources and catch an amorphous or a differently crystallised material. It is not a routine release test. A melting range or a differential scanning calorimetry run is the simpler thermal check, and the isolated material's low melting range, reported around 35–38 °C, is characteristic enough to be useful. A warm sample, a mixture or a wet sample can broaden the range, so read the value with the sample history. Read a “match” statement only after seeing the reference pattern and the detection limit. ## What adulteration looks like Routes that pass a total assay, and the test that catches each | Route | What still passes | What catches it | Menadione added or left in | Assay and appearance | HPLC related substances; the menadione peak | Another menaquinone | A broad “vitamin K2” assay | Retention time, UV spectrum, LC-MS | Dilution with a carrier | A nominal grade name | Assay and mass balance; microscopy | Degraded or isomerised material | Total assay | Chromatogram, UV spectrum, impurity profile | Colourant | The yellow appearance | UV spectrum, HPLC Each route is built to land inside the assay window. The answer is to buy the window and its evidence as one package: assay, menadione, homologue profile, melting range and lot traceability. A supplier who can discuss all five is offering a specification; one who answers only the assay is offering a figure. ## How to write the identity into the specification - “Menaquinone-4 (MK-4), CAS 863-61-6, C31H40O2, isolated crystalline powder.” - “Identity confirmed by HPLC retention time plus a UV spectrum against the menaquinone-4 standard.” - “Assay 98.0–102.0% by HPLC, with the basis stated.” - “Menadione at or below an agreed limit; related substances at or below an agreed limit.” - “Loss on drying ≤0.5%; melting range reported; heavy metals and microbiology as listed.” - “No other menaquinone added; grade and concentration named on the certificate.” A negative statement carries weight only when the method could have found the substance, so name that method beside the statement. The specification should also say whether the assay is on the as-sold or the dried basis, and the menadione result should carry the method that produced it. ## Five questions for the supplier - Which menadione result belongs to this lot, and what method and limit produced it? - Can the chromatogram and the UV spectrum come with the certificate, not just the assay number? - What is the melting range for this lot, and how was it measured? - What was screened for other menaquinones, at what limit, and did the panel include menadione? - Is the material the isolated powder or a dilution, and is the carrier declared? Those five answers together make an identity file. Each figure above has a place on the certificate, and the COA page maps it. The catalog ranges are on the product page, the concentration question on the grade page, and the homologue question on the MK-4 and MK-7 comparison. The methods library describes the separation and the quality page the release file. ### 01 What the COA for bitter melon peptides actually contains URL: https://nutrition.rainwoodbio.com/products/protein-collagen/bitter-melon-peptides/coa/ Reviewed: 2026-11-19 The certificate for a bitter melon peptide lot reports appearance, identification of the protein and peptide profile, protein by Kjeldahl, peptide content by HPLC, ash, moisture, heavy metals, microbiology and particle size. Each line needs its method and release limit, with the measured result in its own column. The limits below are the catalog specification; the batch COA confirms a particular lot. In one lineA bitter melon peptide certificate is complete only when the protein figure, the peptide figure and the ash and moisture beside them carry their methods and their basis. ## The certificate as a test report A certificate is useful when it can be audited line by line: what was measured, which method produced the number, and which limit the lot was released against. A row that says only “conforms” asks the reader to accept a conclusion without the evidence. The identity line decides whether the powder is a bitter melon peptide rather than another plant hydrolysate. Identity, protein, peptide and contaminants · bitter melon peptides | Parameter | Method | Release limit | Appearance | Visual | Off-white to light yellow powder | Identification | Protein and peptide profile against reference | Conforms | Protein | Kjeldahl; factor and basis stated | ≥80.0% | Peptide content | HPLC; method and cut-off stated | ≥70.0% | Ash | Gravimetric, furnace | ≤8.0% | Moisture | Loss on drying | ≤7.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh The source is a parameter too. The certificate should name the species, Momordica charantia, and the plant part, because fruit-derived and seed-derived powders are different raw materials. The catalog fixes the species, not the plant part. ## Protein, peptide and the basis behind both Kjeldahl measures nitrogen; the protein figure is nitrogen multiplied by a conversion factor. For a plant peptide the common convention is N × 6.25, which assumes nitrogen is about 16% of the protein; at that factor an 80.0% result corresponds to 12.8% nitrogen. A certificate that prints 80.0% without the factor has not shown how the number was reached. The catalog gives protein as ≥80.0% and peptide as ≥70.0% by HPLC, but it does not print a moisture basis for the protein. The basis changes the number: 80.0% on a dry basis is about 74.4% as-is at the 7.0% moisture limit, while 80.0% as-is is about 86.0% on a dry basis. Peptide content is a separate measurement. HPLC separates the peptide fraction from free amino acids and other small nitrogenous compounds and reports it against the sample or the protein. The catalog names HPLC but not the column, mobile phase or cut-off, so those belong in the agreed method. The gap is informative. At 80.0% protein and 70.0% peptide, ten points of the protein figure are outside the peptide fraction: free amino acids, small peptides below the cut-off, or non-protein nitrogen. A wider gap is a reason to ask what the method measured, not to reject the lot. ## Release limit versus batch result The release limit is the acceptance boundary; the batch result is what the laboratory measured. Both belong on the page, in separate columns, with the method beside them. A result column filled with the specification range is a copy of the gate, not a result. What the result column should contain | Parameter | Release limit | Result column | Protein | ≥80.0% | A measured percentage with the factor and the basis | Peptide content | ≥70.0% by HPLC | A measured percentage with the method and cut-off | Ash | ≤8.0% | A measured percentage | Moisture | ≤7.0% | A measured percentage | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot For protein and peptide the result needs its basis and method, not only a percentage. For microbiology the evidence is a count plus an absence statement; a single “pass” hides which organism was tested. The lot code on the certificate should match the pouch, the drum and the retained sample. ## What moves between batches The raw material moves first. Cultivar, maturity at harvest, growing season and the plant part all change the protein load and the non-protein fraction. A late-season lot is not the same raw material as an early pick, even when the species is unchanged. The hydrolysis step moves the peptide figure. Enzyme, dose, time, temperature and pH decide how far the protein is cut, and a longer hydrolysis raises the peptide content while it can also raise the bitterness. Decolourisation changes colour, filtration changes ash and the fine fraction, and spray drying fixes moisture and particle size. Colour and taste are the least quantitative lines and often the most revealing. A green tint points to a less completely decolourised lot; a darker tan to a hotter drying step or a longer hold. Bitterness can move outside what a flavoured stick pack will mask while the protein figure still passes. Ask for the retained sample and the storage record rather than rejecting on colour alone. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a claim the certificate does not prove, or a disputed result. The panel answers the open question: protein by Kjeldahl with the factor, peptide by HPLC with the method and cut-off, the amino acid profile, ash and moisture, ICP-MS for heavy metals, and microbiology. Add a source-specific test when the botanical identity is in doubt. A PCR method for Momordica charantia can show that the declared species is present; a PCR screen for soy, pea and wheat can show that another plant source is present. For non-protein nitrogen, the amino acid sum against Kjeldahl is the first screen, and melamine by LC-MS/MS is the specific check. Ask for the detection limit of each screen. Chain of custody matters. The sample tested should be the sample retained, and the report should identify the lot. When a result is contested, give the referee the retained sample, the certificate and the specification, and ask for the tests that separate the possible explanations. ## What to compare between suppliers Put six lines side by side: species and plant part; protein result with factor and basis; peptide result with method and cut-off; ash and moisture; heavy metals and microbiology; and the allergen and cross-contact statement. Two quotations that agree on protein but differ on method or plant part are not describing the same powder. The second layer is traceability: who made the lot, which raw material and hydrolysis conditions were used, and which drying and milling steps were applied. The catalog specification sits on the bitter melon peptides product page. The source tests are on the identity page; the grade choices on the grades page; the method vocabulary in the methods section; the release workflow on the quality page. ### 02 Bitter melon peptide grades: protein, peptide and form URL: https://nutrition.rainwoodbio.com/products/protein-collagen/bitter-melon-peptides/grades/ Reviewed: 2026-11-19 Bitter melon peptides are specified on two figures and a physical form: protein at ≥80.0% by Kjeldahl and peptide content at ≥70.0% by HPLC, as an 80 mesh powder or a granulated powder. The grade decision is what changes when the peptide content, the plant part, the colour or the particle size is adjusted for a dosage form. The certificate follows the grade; it does not define it. In one lineThe grade is the peptide content and the physical form, not the protein percentage alone; granulation changes the line, and a dilution changes the label. ## Why one name covers several powders Bitter melon peptides are described by a process, not by a single molecule. The species is fixed, but the plant part, the degree of hydrolysis, the decolourisation and the drying step are process choices, and each one changes the powder that arrives. Two lots can both pass ≥80.0% protein and ≥70.0% peptide and still differ in bitterness, colour and flow. The catalog names a standard 80 mesh powder. The first grade question is therefore whether that standard powder fits the line, not whether a higher number exists. A capsule line, a stick pack and a tablet press want different flow, density and taste; the peptide chemistry can be identical while the handling is not. ## The grade choices side by side Bitter melon peptide grades · what changes | Grade | Protein / peptide | Form | Fits | Watch | Catalog powder | ≥80.0% / ≥70.0% | 80 mesh powder | Capsules, tablets, blends | The baseline for every comparison | Higher-peptide cut | ≥80.0% / above 70.0%, agreed | Powder | Lower powder weight per serving | More bitter; lower yield | Granulated | Same as the base lot | Granules on request | Sachets, tablets, filling lines | Slower wetting; density shift | Lower-protein dilution | Below 80.0%, with a carrier | Powder | A lower dose per gram | Carrier on the label; not the catalog grade The first three rows are variations of the same material. The fourth is a different specification. A dilution can look like a grade on a quotation because the protein percentage is the only line that moved, but the label now carries a carrier and the peptide content per gram is lower. If the dosage form needs a lower protein load, a dilution is legitimate; it should be ordered as one, with the carrier named. ## What changes in the drum Solubility is good: the powder dissolves in water to a clear to slightly turbid solution. That is why a stick pack or a drink mix is a natural fit, and why haze at high concentration is a formulation question rather than a grade failure. In a pale or clear drink the powder's colour and any turbidity are visible, so the appearance belongs in the bench trial. The powder is hygroscopic. A finer powder picks up moisture faster and can cake; a granulated powder has less surface and flows better, but it wets more slowly. Bitterness is intrinsic to the material. A finer powder disperses faster and can make the bitterness more immediate, while granulation delays it slightly. Neither change removes the taste. Colour runs from off-white to light yellow. A green tint points to a decolourisation issue, not to a peptide grade; it can sit inside the appearance window and still be visible in a pale drink. The grade specification should say whether the colour is measured visually or against a standard. ## What the dosage form needs Capsules and tablets take the standard 80 mesh powder. For capsules the constraint is bulk density and fill weight; for tablets it is flow and compressibility, and a granulated grade is often the practical choice. Bitterness is less exposed in a swallowed capsule, but the fill still tastes bitter if the capsule is opened or chewed. Stick packs and drink mixes are the harder case. The dose has to dissolve, the bitterness has to be carried by the flavour system, and the powder has to flow on the filling line. A flavour system and a sweetener can mask part of the bitterness, but the bench trial has to run at the label dose. A granulated grade helps flow; it does not remove the taste. Gummies and chews add water and heat. The powder is hygroscopic, and the matrix water can make the mix sticky before the chew sets. The grade choice is secondary to the process here: a granulated powder may flow better, but the water activity and the flavour system decide whether the bitterness is acceptable. ## What to write into the specification - “Bitter melon peptides, Momordica charantia; plant part stated.” - “Protein ≥80.0% by Kjeldahl; factor and moisture basis stated on the COA.” - “Peptide content ≥70.0% by HPLC; column, mobile phase and cut-off stated.” - “Ash ≤8.0%; moisture ≤7.0%; ≥95% through 80 mesh.” - “Appearance off-white to light yellow; bitterness and colour standard agreed on the retained sample.” - “Granulation or carrier, if any, named on the specification and the label.” ## When another material is the better fit If the brief is a neutral-tasting protein at a high dose, a bitter melon peptide is the wrong starting point. Soy protein isolate or pea protein isolate will carry the protein with a different taste and a different label. If the label needs ≥90% protein, an 80% peptide is not a direct swap: the powder weight per serving changes. If the formula is a clear beverage at high concentration, test the haze before the grade is fixed. A powder that dissolves cleanly at 1% can turn a 3% drink turbid, and the grade that solves the flow problem may not solve the appearance. The bitter melon versus soy comparison sets out the source, taste and label differences; the COA page shows how the figures are reported; the product page carries the catalog specification. ### 02.1 Bitter melon peptides vs soy peptides: source, taste and label URL: https://nutrition.rainwoodbio.com/products/protein-collagen/bitter-melon-peptides/grades/bitter-melon-peptides-vs-soy-peptides/ Reviewed: 2026-11-19 Bitter melon peptides and soy peptides are both plant protein hydrolysates, but they are different ingredients: different source, different allergen position, different taste and a different analytical identity. A similar protein percentage does not make them interchangeable, and a switch changes the label before it changes the formula. In one lineTwo plant peptides are not interchangeable: the source changes the label and the allergen, and the taste changes the formula before the protein figure does. ## Two plants, two raw materials Bitter melon peptides come from Momordica charantia, a cucurbit eaten as a vegetable in many markets; the fruit is the usual starting material, and the plant part belongs in the specification. Soy peptides come from the soybean, a legume and one of the major food allergens. The two raw materials sit in different botanical families, carry different protein loads and travel through different supply chains. Bitter melon fruit is mostly water and carries little protein on a fresh basis, so an 80% protein powder is necessarily a concentrate and a hydrolysate: the protein is extracted, hydrolysed and dried. Soy protein isolate is already a concentrated protein before hydrolysis, and a soy peptide is usually made from that isolate or from a concentrate. The starting point changes the process, the ash and the taste. ## The protein and peptide figures Bitter melon peptides and soy peptides · what the specification names | Property | Bitter melon peptides | Soy peptides, from soy isolate | Source | Momordica charantia; plant part specified | Soybean | Protein | ≥80.0% (Kjeldahl) | Parent isolate ≥90.0% dry basis, N × 6.25 | Peptide content | ≥70.0% (HPLC) | Depends on hydrolysis; method agreed | Ash | ≤8.0% | Parent isolate ≤5.0% | Appearance | Off-white to light yellow | Off-white to light cream | Taste | Bitter | Savoury or beany; bitterness depends on hydrolysis | Allergen | Not on the current major allergen lists | Soy is a major allergen in the EU and US | Label name | Bitter melon peptides | Hydrolysed soy protein, or soy peptides | Standard form | 80 mesh powder | Powder; agglomerated on request The soy column describes the parent isolate where the peptide grade is not fixed; a soy peptide specification has to state its own protein and peptide figures. The bitter melon column is the catalog specification. Two rows matter most in a switch: the allergen and the taste. ## Bitterness against a savoury base Bitterness is the first practical difference. Bitter melon carries the bitterness of the fruit, and the peptide powder keeps it; the product notes list it as a formula question. Soy peptides are usually described as savoury, brothy or beany, and their bitterness depends on the degree of hydrolysis. A soy peptide can turn bitter at a high degree of hydrolysis, but it does not start from the same bitter base. A bitter ingredient can be masked, but masking takes formula space: a flavour, a sweetener and sometimes a fat or a fibre to round the taste. At a high dose the mask can dominate the formula. A soy peptide usually needs less masking, but its beany note can still clash with fruit flavours. ## The allergen position Soy is one of the major food allergens in the EU and the US. A soy peptide carries the soy declaration, and the label must name soy in the form the destination requires. As of this review, bitter melon is not on the major allergen lists, but that is not the same as allergen-free: the statement still names the source and the shared lines, and a shared plant can add soy, pea, wheat or milk as cross-contact. For a brand built around a non-soy position, the allergen difference is the reason to choose bitter melon. For a brand that already declares soy, the allergen is not a new burden, and the soy peptide may be the simpler material. ## What the label has to say The label names the source. “Bitter melon peptides” and “soy peptides” are different ingredient names, and “peptides” is not a synonym for “protein”. The declaration has to match the material in the drum, not the marketing name on the front. A blend would need both names, in the order the destination requires. The protein figure on the label is a separate calculation. An 80% protein figure on a dry basis, at 7% moisture, is about 74.4% as-is; a soy isolate at 90% dry basis is about 83.7% as-is. If the label declares protein, the basis and the factor have to be consistent with the certificate. A switch from one material to the other changes the powder weight per serving even when the label claim stays the same. ## The tests that separate them Both materials need the same three methods: protein by Kjeldahl with the factor, peptide content by HPLC with the cut-off, and a source-specific test. The source test is where they diverge. Soy has well-established PCR and ELISA methods; bitter melon needs a PCR method or a marker profile that the laboratory has validated. An amino acid profile helps: soy is rich in aspartate, glutamate, arginine and lysine, while a cucurbit peptide has a different pattern. The peptide method must be the same on both sides of a comparison. A soy peptide measured by size-exclusion HPLC and a bitter melon peptide measured by reverse-phase HPLC are not two numbers on the same scale. ## When each one fits Choose bitter melon peptides when the brief needs a non-soy source, a specialty botanical position, and the bitterness can be carried by the formula. Choose soy peptides when the brief needs a high protein density, a familiar allergen declaration, a savoury base and a large supply. Choose pea protein isolate when the brief needs a pulse protein without soy; it is a protein isolate, not a peptide, and the label says so. The decision is not settled by the protein percentage. It is settled by the source claim, the allergen, the taste and the certificate. Run the bench trial with the material that will ship, at the dose the label will use. The bitter melon peptides product page carries the catalog specification; the soy protein isolate page describes the parent material; the pea protein isolate page covers the non-soy alternative; the grades page sets out the peptide and form choices; the identity page covers the source tests; the methods section explains the assays. ### 03 Bitter melon peptides are hygroscopic; the pack sets the shelf life URL: https://nutrition.rainwoodbio.com/products/protein-collagen/bitter-melon-peptides/stability/ Reviewed: 2026-11-19 Bitter melon peptide powder is hygroscopic and bitter. In a sealed, cool, dry pack it is a stable solid; once moisture gets in, caking, colour and taste move first, and the protein and peptide figures can still pass. A solution adds heat, pH and oxygen, and it needs its own shelf-life data. In one lineThe powder is hygroscopic and the taste is bitter; the pack controls the water, and the shelf life belongs to the pack, not to the peptide. ## The dry powder: water, colour and taste The catalog sets moisture at ≤7.0% by loss on drying. That is a release gate, not a storage allowance. The powder picks up water from the air after the pouch is opened, and the water plasticises the particle surface, so the powder bridges into lumps under its own weight. The same water raises the water activity enough for colour and taste reactions to run. Residual sugars from the raw material can brown in the presence of moisture and heat. The reaction shows first as a cream or tan tint, then as a cooked or caramel note that a fruit flavour may not cover. The protein figure does not move at the same rate, which is why a lot can pass the certificate and fail the taste panel. Light is a secondary factor. The pack should still be opaque if colour matters, but moisture and heat are the drivers. A clear jar on a bench is the wrong container for a hold. ## The solution: heat, pH and haze The powder dissolves in water to a clear to slightly turbid solution, and in solution the peptide is exposed to water, heat, pH and oxygen at the same time. The peptide bonds are reasonably stable at ambient temperature, so the protein figure is not usually the first thing to fall. Appearance and taste move first: the solution darkens, takes on a cooked note, and can develop haze as the longer peptides aggregate. Heat is the main accelerator. A pasteurisation or hot-fill step can add as much change in one pass as months of ambient storage. pH matters too: a low-pH drink and a neutral drink do not age the same way, and the same powder can be clear in one and hazy in the other. Microbiological stability is a separate question. The powder is specified at APC ≤1,000 cfu/g with E. coli and Salmonella absent, but a reconstituted drink is a water-based food and needs its own preservation, thermal process or water-activity control. The certificate of the powder does not carry over to the drink. ## What drives the change Factors that move bitter melon peptides during storage | Factor | What it does | Control | Moisture | Caking, colour and taste change | Sealed pouch; desiccant where needed | Heat | Accelerates browning and cooked notes | Cool store; cool process | Oxygen | Colour and flavour change in solution | Low headspace; sealed pack | pH | Haze and taste change in solution | Validate the matrix pH | Reducing sugars | Browning with moisture and heat | Specify residual sugar; test the matrix | Metal ions | Colour development in a moist powder | Avoid iron and copper contact | Light | Colour fade over time | Opaque or foil pack These factors are not independent. A warm, humid store is worse than each factor acting alone, and a solution at neutral pH in clear glass combines all of them. The useful question is not whether the peptide is stable, but stable in which pack, at which condition, for how long. ## A stability protocol for the ingredient Storage conditions and what each one answers | Condition | Duration | What it tests | 25 °C / 60% RH | Long term | Shelf life at the stated storage condition | 30 °C / 65% RH | Intermediate | Behaviour in a warm, humid market | 40 °C / 75% RH | Accelerated | Moisture uptake, caking, colour, taste | Open-pack challenge | Short term | In-use behaviour after opening Test protein by Kjeldahl with the factor stated, peptide content by HPLC with the same method at every point, moisture, ash, appearance, taste and microbiology. The peptide figure is a process fingerprint; a shift can point to hydrolysis during a hot hold or to a blend, so the method has to stay identical across the time points. The report should show the individual results, not only a pass statement, and it should identify the pack and the lot family. Ask for the data for the pack you will buy. A 1 kg pouch and a 25 kg drum have different headspace, surface-to-volume ratio and opening history; a summary from another pack is a starting point, not evidence for yours. ## The finished formula changes the answer A capsule or tablet has low water activity, but the shell and the excipients can still transfer moisture. Check loss on drying at release and after storage, and check the appearance of the fill. A stick pack depends on the seal and the foil; a pinhole is a failure, and the strip should be inspected, not only the powder. A beverage combines light, pH, heat and oxygen. The bulk stability of the ingredient is the starting point; the drink's shelf life has to be measured in the drink. A gummy adds a water activity and a flavour system of its own, and the bitterness can change as the matrix water moves. The formulator decides whether an overage is needed. That is a label and stability decision, and it does not repair a pack that lets moisture in. ## How the shelf life is set We do not publish a single shelf-life number for bitter melon peptides, because the pack and the storage condition set it. The assigned retest period belongs on the specification and is supported by the stability file for that pack. A number without a pack, a condition and a test panel is not a shelf life; it is a claim. After the retest period, re-assay the retained sample before extending use. Do not extend by assumption, and do not carry a bulk figure across to a repacked container. The product page lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the methods section describes the assays; the quality page describes how release is handled. ### 04 Bitter melon peptides: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/protein-collagen/bitter-melon-peptides/moq/ Reviewed: 2026-11-19 The MOQ for bitter melon peptides is 1 kg, supplied as a 1 kg foil pouch; the bulk pack is a 25 kg fiber drum. Lead time is 1–7 days for the standard powder. A firm quotation needs the species and plant part, the protein factor and basis, the peptide method, the quantity and pack, the destination and Incoterm, and the documents. In one lineThe minimum is one kilogram because the trial, the retained sample and the third-party test have to come from the same lot. ## Why the minimum is 1 kg A 1 kg pack covers a bench trial, a retained sample and an independent identity test. It is small enough to ship as a parcel, which matters when a formulator needs material before the production plan is fixed. The pack is a commercial unit with a lot code, not a scoop from a bulk drum. Below 1 kg the material is usually split from a larger lot and repacked. That adds handling, loses the original pack identity and makes traceability harder, without changing the chemistry. The 25 kg drum is the bulk unit: it reduces handling per kilogram, but it commits inventory and a longer storage period. The MOQ is a pack decision, not a volume incentive. ## Packs and formats Standard bitter melon peptide packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Light and moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Particle profile changes | Dilution or blend | On request | Lower protein per gram | Carrier and label change The catalog form is an 80 mesh powder: ≥95% through 80 mesh. Granulation or dilution is a different specification, not a packing choice. Say so before the quotation, because it moves the particle-size line, the label and possibly the lead time. ## Lead time and dispatch The standard pack is quoted at 1–7 days from order confirmation. That window covers picking, document preparation and dispatch; it does not include the shipping transit, customs clearance or the customer's own quality release. A custom granulation, a dilution or a non-standard pack add time, and the quotation should state it separately. Ask for the dispatch date, not only the lead time. A 25 kg drum may travel on a pallet and a 1 kg pouch as a parcel; the Incoterm decides who books the freight and who clears the entry. The documents should travel with the lot, not after it. ## What a quotation needs Six items make a quotation firm enough to compare: - Product and species. Bitter melon peptides, Momordica charantia, with the plant part written out. - Specification. Protein factor and basis, peptide method and cut-off, ash, moisture and particle size. - Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated, diluted or blended variant. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, specification, SDS, and any market-specific statement the importer needs. - Intended use and market. Supplement, food or another use, and the market where it will be sold. A quotation without the plant part, the protein basis or the market is incomplete. The same powder can fit one destination and sit outside the file for another, and the paperwork is part of the offer. Commercial terms are stated on the quotation, not on this page. ## The sample is a lot, not a demonstration The 1 kg pack is the qualification sample. Test identity, protein, peptide, ash, moisture and microbiology before scaling, and keep a retained sample from the same pack. The lot code on the sample, the COA and the quotation should match. A sample that cannot be traced to a lot is a demonstration, not a qualification. If the project needs less than 1 kg for a bench trial, discuss it before ordering. A split from a bulk lot is a repack with its own traceability, not the catalog pack. Do not assume that the bench sample and the production drum will come from the same lot. ## Terms to settle before the first order The quotation sets the commercial terms, the Incoterm, the pack, the lead time and the documents. The quality terms belong beside them: the specification revision, the COA per lot, the retained sample, the retest period and the change-control route. A quality agreement is worth having before the first production order, not after the first dispute. Returns and replacements follow the quotation and the quality agreement. A lot that fails the agreed specification should be handled through the retained sample and a joint re-test, not through a photograph of the powder. Ask who pays for the referee test, and which laboratory is acceptable to both sides. The product page carries the catalog specification; the COA page lists the release tests; the compliance page covers the market file; the MOQ glossary entry defines the term; the logistics page covers shipping and documents. ### 05 The regulatory file for bitter melon peptides URL: https://nutrition.rainwoodbio.com/products/protein-collagen/bitter-melon-peptides/compliance/ Reviewed: 2026-11-19 Bitter melon peptides are a food ingredient derived from Momordica charantia, but the regulatory question is not the vegetable; it is the peptide concentrate and the process that makes it. The buyer's regulatory team confirms the route for the destination. This page lists the framework, the documents and the checks that belong in the file. In one lineThe species and the process decide the regulatory question; the file has to show both, and the destination route is the buyer's confirmation. ## What the file contains A complete file answers four questions: what the material is and which specification version is bought; which lot is released and what its certificate reports; which limits and label rules apply to the finished product; and what changes if the source, the process or the pack changes. The certificate answers the lot question, the technical data sheet answers the specification question, and the safety data sheet answers the handling question. None of them answers the route question alone. Process matters. A vegetable with a long culinary history is not automatically the same regulatory object after hydrolysis, concentration and spray drying. The file should describe the process flow, the solvents and any carrier, because those steps decide whether the material is a traditional food or a new ingredient for the destination. ## European Union The EU file is built from the specification, the process description, the contaminant results and the label. The Novel Food Regulation (EU) 2015/2283 turns on a history of consumption before 15 May 1997; a concentrate or hydrolysate may still need a determination even when the raw vegetable has a long history. General food law (EC) 178/2002, labelling Regulation (EU) 1169/2011, the nutrition and health claims Regulation (EC) 1924/2006 and the contaminant Regulation (EU) 2023/915 apply alongside that route. The buyer confirms whether the material falls inside or outside the novel-food definition, and the supplier supplies the composition, process and use data that the determination needs. As of this review, check the current consolidated text. Northern Ireland follows the EU framework; Great Britain uses the GB register and GB labelling rules. The buyer confirms which of the two applies to the destination and keeps the evidence with the order. ## United States The US file is built around the exact dietary ingredient or food substance and its intended use. For a supplement, the route may be a new dietary ingredient notification or an ingredient marketed before 15 October 1994; for a conventional food, the food-additive or GRAS route applies. The supplier should name the basis it relies on and point to the supporting document; the buyer confirms that the basis covers the finished product and the claim. Bitter melon is not one of the major food allergens in the EU or the US as of this review, but the allergen statement still names the source and the shared lines. Cross-contact with soy, pea, wheat or milk on a shared plant is a label and control question, not a property of the peptide. ## Contaminants and limits The contaminant panel is a finished-product calculation, not only a drum result. The table is a starting point for a food-supplement file; the current destination text and the daily dose decide the final limit. Contaminant checks to confirm for the finished product | Parameter | Typical reference | What the file should show | Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method and finished-product calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception | Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result and method | Arsenic (As) | Customer or market limit | The agreed limit and the method | Pesticide residues | Destination maximum residue levels | Lot data or a risk assessment, with the method | Microbiology | Counts and absence | The count and the absence statement for the lot The pesticide line matters more for a crop-derived material than for a fermentation product. The raw material is harvested plant material, and the residue risk follows the grower and the season; a supplier should be able to say how it is controlled, not only that the finished powder passed a screen. ## Label and claims The label names the material, the quantity and the source in the form the destination requires. The claim review is separate: the brand's regulatory reviewer confirms that the wording is allowed for the product, the form and the market. A culinary history is not a health claim, and the certificate does not approve a claim. For this product, no disease-related claim is made on this page or in the specification. Structure/function wording, if used, is the brand's responsibility for the destination. The supplier's file supports the composition; it does not supply the claim wording. ## The document pack Documents that belong in the batch and market file | Document | What it answers | Check | COA | The lot result against the specification | Lot code, methods, factor and basis | Technical data sheet | The specification and the pack | Version and issue date | Safety data sheet | Handling and transport | Current revision | Allergen statement | Source and cross-contact | Shared lines named | GMO statement | Genetic modification status | Per lot or per material | Origin statement | Country of origin and harvest | Consistent with the raw-material record | Residual solvent statement | Process solvents | Named solvent; limit agreed | Process flow | Hydrolysis, concentration, drying | Carriers and aids named A document list with version numbers is more useful than a folder of undated PDFs. Where a statement is not available for the lot, the gap should be named before the order, not discovered at the port. ## Checklist before the first order - Specification version, species and plant part are named. - COA, TDS, SDS, allergen, GMO, origin and residual-solvent statements are on file. - The contaminant and pesticide results are converted to the finished-product dose. - The process flow and any carrier are described. - The label and the claim have been reviewed for the destination. - The source, process and pack are under change control. - The quotation, specification and certificate refer to the same version. The product page carries the catalog specification; the COA page explains the lot certificate; the identity page covers the analytical evidence; the EU regulatory note gives the framework; the quality page describes the release file. ### 06 How to prove a lot is bitter melon peptides URL: https://nutrition.rainwoodbio.com/products/protein-collagen/bitter-melon-peptides/identity/ Reviewed: 2026-11-19 A bitter melon peptide lot is identified by four agreeing measurements: protein by Kjeldahl, peptide content by HPLC, a source-specific test or marker profile, and an ash-and-moisture mass balance. The document names the species and plant part; the measurements test the claim. The protein figure alone can be met by another plant protein or by non-protein nitrogen; the peptide figure and the source test are what close the gap. In one lineIdentity is a set of agreeing measurements: the species and plant part, the protein and peptide figures, and a source-specific test, not one assay. ## The four identity layers The document names the species and plant part, but a name on a certificate is not evidence. The four measurements below are separate questions, and each needs its own result. A supplier who answers only the protein figure has described the paperwork, not the powder. Four layers of bitter melon peptide identity | Layer | Question | Test | What it proves | Protein | How much nitrogenous material is present? | Kjeldahl with the factor stated | Protein, not the source | Peptide | How much of it is peptide? | HPLC with the method and cut-off | The peptide fraction | Source | Is it Momordica charantia? | PCR or a marker profile | The botanical source | Mass balance | Is it diluted? | Ash, moisture, amino acid profile | Consistency of the numbers The four are independent. A lot can be genuine bitter melon and still be diluted; it can pass protein and peptide and still contain soy; it can be the right species and the wrong plant part. Each needs its own evidence, and the evidence belongs in the batch file rather than in a marketing sentence. ## The protein-to-peptide gap and the ash ratio The simplest screen is the gap between protein and peptide. At the catalog figures, 80.0% protein and 70.0% peptide leave ten points outside the peptide fraction. Free amino acids, small peptides below the cut-off and non-protein nitrogen sit in that gap. A gap of ten points is expected; a gap of twenty is a question. The ash figure is a second ratio. At ≤8.0% ash and ≥80.0% protein, the ash-to-protein ratio is at most 0.10. A lot with 80% protein and 12% ash carries either a mineral load or a neutralisation salt that the specification did not intend. Ash is not a peptide measurement, but it is simple to check and hard to hide. Non-protein nitrogen is the case that most needs the amino acid profile. Kjeldahl counts nitrogen from protein, free amino acids, urea, melamine and ammonium salts alike. The amino acid sum, expressed as protein, should sit close to the Kjeldahl figure. A shortfall of five or more points suggests nitrogen that is not protein. ## Where XRD and FTIR stop Spray-dried peptide powder is amorphous, so an X-ray diffraction scan shows a broad halo rather than sharp peaks. That halo is consistent with a spray-dried hydrolysate but does not identify the species. Sharp reflections point to a crystalline addition: an amino acid used to lift the nitrogen figure, an inorganic salt, a sugar that crystallised in storage, or a mineral carrier. FTIR gives a functional-group fingerprint. Absorbance near 1650 cm⁻¹ (amide I) and 1545 cm⁻¹ (amide II) comes from the peptide backbone; the carbohydrate region carries residual sugar and any carrier. FTIR confirms the material class quickly, but it cannot tell bitter melon from soy or pea. Use it as a screen, not as identity. The methods section sets out what each technique proves and what it leaves open. ## What adulteration looks like Substitution routes for a plant peptide and the signals | Route | What it changes | Signal | Test | Another plant protein | Raises protein with a different source | Soy, pea or wheat marker; amino acid shift | PCR; amino acid profile | Non-protein nitrogen | Raises Kjeldahl without adding protein | Protein up, amino acid sum flat | Amino acid profile; melamine by LC-MS/MS | Free amino acids | Raises protein; peptide fraction unchanged | Peptide low against protein | Peptide HPLC; amino acid profile | Maltodextrin or sugar | Lowers protein; raises carbohydrate | Protein down, carbohydrate up | Mass balance; sugar HPLC | Juice powder, not hydrolysed | Peptide low; larger molecules | Peptide below 70%; broad size curve | Peptide HPLC; molecular-weight distribution | Plant-part substitution | Protein and ash shift; source record differs | Material from a different plant part than declared | Source record; marker profile; PCR The first two routes matter most for a plant peptide at 80% protein. Another protein is easy to add and shows in the amino acid profile; non-protein nitrogen is harder to see and needs the amino acid sum plus a specific method. Colour is the weakest signal: off-white to light yellow is a wide window and does not prove anything. ## How to write identity into the specification - “Bitter melon peptides, Momordica charantia; plant part stated.” - “Protein ≥80.0% by Kjeldahl; factor and moisture basis stated on the COA.” - “Peptide content ≥70.0% by HPLC; column, mobile phase and cut-off stated.” - “Ash ≤8.0%; moisture ≤7.0%; ≥95% through 80 mesh.” - “No added plant protein, free amino acids or non-protein nitrogen.” - “Amino acid profile reported; source PCR or marker profile on request.” - “Allergen and cross-contact statement names the source and the shared lines.” ## Five questions for the supplier - Which species and plant part were used for this lot? - What conversion factor and moisture basis produced the protein figure? - Which HPLC method and cut-off produced the peptide figure? - What is the amino acid profile, and how does it compare with the Kjeldahl result? - Will you support a source-specific PCR or marker test, and a joint re-test on the retained sample? Five direct answers amount to an identity file. A single protein percentage does not. The product page carries the catalog specification; the COA page shows where each figure sits on the certificate; the grades page covers the peptide and form choices; the quality page describes the retained sample and release file. ### 01 What the COA for casein phosphopeptides actually contains URL: https://nutrition.rainwoodbio.com/products/protein-collagen/casein-phosphopeptides/coa/ Reviewed: 2026-11-19 A casein phosphopeptide (CPP) certificate reports protein by Kjeldahl, peptide content by HPLC, calcium by titration, ash, moisture and the contaminant panel. The first three lines are not interchangeable: protein includes the peptides, peptide measures the fraction the HPLC method counts, and calcium measures the mineral the phosphoserine clusters carry. The limits below are the catalog specification; a batch COA confirms a particular lot. In one lineThe CPP certificate turns on three figures that are not interchangeable: protein by Kjeldahl with its factor and basis, peptide content by HPLC, and calcium by titration, read beside the ash. ## The certificate as a test report A CPP certificate is read in two blocks. The composition block carries protein, peptide, calcium, ash and moisture; the contaminant block carries heavy metals, microbiology and particle size. Each line needs its method and release limit, and the measured result belongs in its own column. A certificate that prints only “conforms” asks the reader to accept the conclusion without the evidence. Composition, contaminants and physical parameters · casein phosphopeptides, catalog limits | Parameter | Method | Release limit | Appearance | Visual | Off-white to light tan powder | Protein | Kjeldahl | ≥80.0% | Peptide content | HPLC peptide distribution | ≥70.0% | Calcium | Complexometric titration | 2.0–4.0% | Ash | Gravimetric, furnace | ≤10.0% | Moisture | Loss on drying | ≤5.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh The method column decides whether two certificates can be compared. A calcium figure by titration and one by ICP-OES are both valid, but they are not the same measurement; the same is true of peptide by HPLC and protein by Kjeldahl. ## The protein factor, the peptide fraction and the basis Kjeldahl measures nitrogen and multiplies it by a factor. For milk protein the factor is 6.38; the general 6.25 understates a dairy protein by about 2%. The factor must be printed beside the protein figure, because 80.0% with 6.25 and 80.0% with 6.38 are different amounts of nitrogen. The basis is the second half of the figure. The catalog sets protein at ≥80.0% and moisture at ≤5.0%; a dry-basis result of 80.0% at the moisture ceiling corresponds to about 76.0% as-is. The certificate and the purchase order should both state the basis, because a four-point difference is enough to fail an agreed release limit. Peptide content is a separate measurement, not a second protein figure. The HPLC distribution separates the peptide fraction from free amino acids and salts, and the result is reported as a percentage of the powder. Protein and peptide overlap: the peptides are part of the protein, so an 80% protein figure and a 70% peptide figure do not add to 150% of the material. The gap between them is where free amino acids and non-peptide solids sit. Calcium is measured by complexometric titration and reported as the element. The ash ceiling of 10.0% is consistent with the mineral load: at 4.0% calcium the oxide alone accounts for about 5.6% of the powder, and the phosphate adds to it. Calcium, ash and phosphorus, when it is reported, belong together. ## Release limit, catalog range and lot result The catalog range is the window the grade is sold inside, the release limit is the narrower boundary agreed for a market or a customer, and the lot result is the measurement. The first two are promises; only the third is evidence. What the result column should contain | Parameter | Catalog limit | Result column | Protein | ≥80.0% | A measured percentage with the factor and the basis | Peptide | ≥70.0% | A measured percentage with the HPLC integration range | Calcium | 2.0–4.0% | A measured percentage and the titration method | Ash | ≤10.0% | A measured percentage | Moisture | ≤5.0% | A measured percentage | Heavy metals | Per element | A figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot | Particle size | ≥95% through 80 mesh | The measured percentage through the sieve A result column that repeats the catalog range is not a result. For microbiology the evidence is a count plus an absence statement; for heavy metals it is a figure per element, not a single total. ## What moves between lots The raw material is milk, and milk is seasonal. Feed, stage of lactation and herd management move the protein and the mineral load in the casein, and the hydrolysis and membrane steps can only work with what arrives. The hydrolysis time and the enzyme dose move the peptide distribution; a longer hydrolysis shifts the profile toward smaller peptides and can raise the peptide figure while the protein figure stays inside its window. A calcium adjustment, where it is used, moves calcium and ash together. The dryer moves moisture, colour and flow, and milling moves the sieve result. A hotter inlet gives a drier, free-flowing powder that wets slowly; a gentler dry holds more moisture and disperses more easily. Neither is an identity failure, but they are not interchangeable in a filling line. The lot code on the certificate should match the pouch, the drum and the retained sample. ## When an outside test earns its fee Order an independent test for a new source, a first shipment into a regulated market, a peptide claim the certificate does not prove, or a disputed result. The panel should answer the open question: protein at a second laboratory with the factor stated, peptide by HPLC, calcium by titration and phosphorus by ICP-OES, ash, moisture, heavy metals, microbiology, and a melamine and cyanuric acid screen. The melamine screen matters because Kjeldahl measures nitrogen, not protein. Melamine is about 67% nitrogen by mass, so a small addition lifts the protein figure without adding a peptide. Urea does the same on a smaller scale. Neither is caught by a protein result; both are caught by the nitrogen source and the amino acid profile. Ask the laboratory for its detection limit, because a “not detected” line without one describes the method, not the sample. ## What to compare between suppliers Put seven lines side by side: protein with its factor and basis; peptide with the HPLC method and integration range; calcium and phosphorus; ash; moisture and particle size; the allergen statement naming milk; and the traceability from the certificate to the pack. Two offers that agree on 80% protein and disagree on the peptide method or the calcium figure are not describing the same powder. The peptide figure separates CPP from a casein powder; the amino acid profile and the calcium-phosphorus pair separate it from another hydrolysate, and the calcium figure shows whether the mineral load is part of the material or an addition. The catalog specification sits on the casein phosphopeptide product page; the tests that separate CPP from casein are on the identity page; the titration and HPLC methods are described in the methods section; the release workflow is on the quality page. ### 02 Casein phosphopeptide grades: peptide, calcium and physical form URL: https://nutrition.rainwoodbio.com/products/protein-collagen/casein-phosphopeptides/grades/ Reviewed: 2026-11-19 Casein phosphopeptide (CPP) is sold as one catalog grade with a peptide minimum, a calcium range and a powder form, but several axes still move inside it: peptide content, calcium load, protein basis and particle form. The grade decision is about which axis the formula needs, because each one moves a different line: peptide content and calcium load change the ash and the mass per serving, while the physical form changes flow, dust and wetting. A higher peptide figure is not automatically the right purchase if the calcium contribution is the reason for the ingredient. In one lineThe CPP grade is set by the peptide content, the calcium load and the physical form; each axis moves a different line in the specification, not the name of the material. ## Why there is more than one grade CPP is a peptide fraction from casein, and the fraction is not a single molecule. The hydrolysis conditions set the peptide distribution; the membrane step decides how much of the smaller fraction is retained; the calcium addition, where it is used, sets the mineral load; the dryer and the mill set the physical form. Each of those is a specification decision, and a supplier can offer more than one combination. The catalog grade fixes the middle of the road: protein ≥80%, peptide ≥70%, calcium 2.0–4.0%, ash ≤10.0%, 80 mesh. The axes below describe what moves when a formula needs something else. ## The axes side by side Axes inside the casein phosphopeptide specification | Axis | Catalog position | What changes when it moves | Peptide content | ≥70.0% by HPLC | A higher peptide figure is a separate specification; less non-peptide solid per gram | Calcium load | 2.0–4.0% | The top of the range carries more calcium and more ash, and less peptide per gram | Protein basis | ≥80.0%, basis agreed | Dry basis versus as-is moves the figure by up to five points at the moisture ceiling | Physical form | 80 mesh powder | Granulation changes flow, dust and wetting; the chemistry does not change | Colour window | Off-white to light tan | A tighter window is a separate specification and can move the drying step | Mineral addition | Not specified | An added calcium salt raises calcium and ash without raising phosphorus The catalog grade is the 80 mesh powder; granulation is on request. The other columns are directions for a specification, not stock items, and each one has to be agreed in writing before the order. ## Solubility, flow and colour The powder dissolves in water to a clear to slightly turbid solution. Solubility is not unlimited: a concentrated stock may need warming or a longer dispersion time, and the calcium load can make the solution turbid as the concentration rises. Trial the concentration the formula will use rather than the one in a brochure. Flow and dust change with the particle form. An 80 mesh powder flows well enough for a capsule filler but can dust in a stick-pack line; a granulated form reduces dust and wets more slowly. Neither is a defect, but the filling line notices the difference. Colour is off-white to light tan. The window is wide because the raw milk and the drying step move it; a lot that is noticeably darker can point to a longer heat load or moisture pickup, while a lot inside the window is not an identity failure. Taste is a formula question: a peptide fraction is not tasteless, and the level that disappears in a capsule may be noticeable in a clear drink. ## The mass arithmetic The calcium figure is the first arithmetic. At 3.0% calcium, 1 g of powder carries about 30 mg calcium; at 2.0% it carries 20 mg, and at 4.0% it carries 40 mg. The same calcium target therefore needs half the powder at 4.0% as at 2.0%, which changes the capsule count or the stick weight before it changes anything else. The calcium contribution is modest against the reference values. The EU nutrient reference value for calcium is 800 mg, so 30 mg is about 3.8% of it; the US Daily Value is 1,300 mg, so the same 30 mg is about 2.3%. A 500 mg capsule at 3.0% calcium carries about 15 mg calcium. A source-of-calcium claim under Regulation (EC) No 1924/2006 needs at least 15% of the EU reference value in the daily dose, which is 120 mg, and reaching that from CPP alone at 3.0% would take about 4 g of powder. A 500 mg capsule at 80% protein carries about 0.4 g protein, so the ingredient is not a practical protein source at a capsule dose. If protein is the object, casein or collagen peptides are the ingredients to compare; CPP is bought for the peptide fraction and the mineral load. ## What to write into the specification - “Casein phosphopeptides (milk), peptide content ≥70.0% by HPLC; state the integration range.” - “Protein ≥80.0% by Kjeldahl, factor 6.38, basis stated.” - “Calcium 2.0–4.0% by complexometric titration; report phosphorus by ICP-OES.” - “Ash ≤10.0%; moisture ≤5.0%; particle size ≥95% through 80 mesh.” - “Allergen statement naming milk; lot number and site on the COA.” - “Intended use and market confirmed before the order.” A specification is only as good as the method beside each line. “Peptide 70%” without the HPLC method and the integration range is a number that two laboratories can read differently. ## When a different ingredient is the better choice If the formula needs protein, casein is the direct comparison: at ≥90% protein on a dry basis and ash ≤2.0%, it delivers more protein per gram with a neutral taste and a low mineral load. The micellar casein page sets out the form and its limits. If the formula needs a hydrolysed protein for a clear beverage and the calcium is not wanted, collagen peptides deliver ≥90% protein with a defined molecular-weight distribution. The collagen peptide page covers the profile. If the formula needs a calcium claim, a calcium salt delivers more calcium per gram than CPP at 2.0–4.0%. CPP is a peptide ingredient with a mineral load, not a calcium supplement. The reverse is also true: a protein powder does not carry the phosphopeptide fraction, and a formula built on that fraction should not be switched on a protein figure alone. The catalog specification sits on the casein phosphopeptide product page; the certificate is read on the COA page; the comparison with the parent protein is on the CPP versus casein page; the HPLC and titration methods are in the methods section. ### 02.1 Casein phosphopeptides vs casein: the peptide fraction and the protein URL: https://nutrition.rainwoodbio.com/products/protein-collagen/casein-phosphopeptides/grades/cpp-vs-casein/ Reviewed: 2026-11-19 Casein phosphopeptides (CPP) are made from casein, but they are not a stronger casein. Hydrolysis cuts the protein into smaller peptides and concentrates the phosphorylated fraction; the result has a peptide minimum, a calcium load and a solubility that the parent protein does not have. The two ingredients answer different formulation questions, and the protein figure is the worst single line for comparing them. In one lineCasein phosphopeptides are a hydrolysed, phosphorylated fraction of casein, not a stronger casein: the peptide content, the calcium figure and the solubility are different measurements. ## What hydrolysis does to casein Casein is the main protein of milk, and in micellar casein it is sold as a dispersed protein with a protein minimum of 90% on a dry basis. CPP starts from casein and uses a food-grade protease to cut the chain; the phosphoserine clusters resist further breakdown, so the fraction that survives is enriched in phosphorylated peptides. The membrane step then selects the peptide size, and the dryer turns the fraction into a powder. The parent protein is a large molecule; the CPP fraction is a mixture of much smaller peptides. That change in size is why the solubility, the taste and the calcium behaviour differ. ## The two ingredients side by side Casein phosphopeptides against micellar casein | Property | Casein phosphopeptides | Micellar casein | Protein | ≥80.0% by Kjeldahl | ≥90.0% dry basis, N × 6.38 | Peptide content | ≥70.0% by HPLC | Not a specification line | Calcium | 2.0–4.0% (specified) | Not on the specification; ash ≤2.0% | Ash | ≤10.0% | ≤2.0% | Moisture | ≤5.0% | ≤10.0% | Solubility | Soluble; clear to slightly turbid | Dispersible; swells, not a clear solution | Molecular size | Peptide fraction, much smaller than the parent protein | Intact micellar protein | Label name | Casein phosphopeptides (milk) | Micellar casein (milk) The table compares specifications, not rank. The casein column is the micellar grade on this site; caseinate is a different casein ingredient with its own ash and sodium or calcium load. ## The protein figure measures different things A 90% protein figure for casein and an 80% figure for CPP are not points on the same scale. The casein figure is protein on a dry basis with N × 6.38; the CPP figure is a minimum with the basis to be agreed, and the peptide line sits underneath it. The CPP peptides are part of the protein figure, so the two lines overlap rather than add. If the purchase is for protein, casein delivers more protein per gram and carries a low ash. If the purchase is for the phosphopeptide fraction, the protein figure says little: a casein powder can meet 80% protein and contain little of the peptide fraction the CPP specification measures, and a CPP that meets 80% protein can still miss the 70% peptide line. Read the peptide line with its method. The HPLC distribution and the integration range decide what the figure means; a peptide number without them is not comparable across suppliers. ## Calcium and ash are part of the identity Micellar casein carries colloidal calcium phosphate, but the casein specification does not state a calcium figure; it controls the mineral load through ash ≤2.0%. CPP states calcium at 2.0–4.0% and allows ash up to 10.0%, so the mineral load is a specification line rather than a background. That is why the CPP calcium figure has to be read with phosphorus. Bound calcium travels with the phosphopeptide; an added calcium salt raises calcium and ash without raising phosphorus. A CPP buyer who needs the peptide fraction should ask for the pair, not the calcium alone. The calcium load also changes the mass. At 3.0% calcium, 1 g of CPP carries about 30 mg calcium, while casein at its ash ceiling carries a smaller and unspecified amount. A formula built on CPP for its calcium is a different formula from one built on casein for its protein. ## When each ingredient belongs in the formula Choose casein when the object is protein: a powder, bar or drink that needs a high protein figure per gram, a neutral taste and a low mineral load. It disperses and thickens, which suits a bar or a shake, and it carries the milk allergen without the peptide specification. Choose CPP when the object is the phosphorylated peptide fraction and its calcium load: a capsule, a tablet or a powder where the peptide and the mineral are the reason for the ingredient. The solubility suits a drink, but the calcium equilibrium and the taste have to be trialled in the matrix. Do not substitute one for the other on a protein figure. A casein lot that meets 90% protein is not a CPP, and a CPP lot that meets 80% protein is not a protein source in the sense that a protein powder is. ## The label and the allergen Both ingredients are milk-derived, so both carry the milk allergen declaration. The names are not interchangeable: “micellar casein” describes a milk protein, while “casein phosphopeptides” describes a peptide fraction, and a label that uses one name for the other is inaccurate even when both come from milk. The regulatory route is also different. Casein has a long history of food use; a CPP is a processed fraction, and whether it is inside a novel-food framework, a GRAS basis or another route is a destination question for the buyer’s regulatory team. The parent ingredient’s history does not automatically cover the hydrolysate. Check the claim arithmetic before the label is set. A CPP at 2.0–4.0% calcium delivers 10–20 mg calcium in a 500 mg capsule, a small fraction of the EU reference value of 800 mg. The claim belongs to the finished product, not to the ingredient name. ## The purchase order decides it Write the ingredient, the source and the specification. For casein: micellar casein, protein ≥90.0% dry basis with N × 6.38, ash ≤2.0%, moisture ≤10.0%. For CPP: casein phosphopeptides (milk), peptide ≥70.0% by HPLC, protein ≥80.0% with the factor and basis, calcium 2.0–4.0%, ash ≤10.0%. Then write the use level as powder mass and show the protein and calcium it delivers. A purchase order that names only “casein” or only “CPP” has not specified either ingredient, and a switch between them is a new specification, a new label and a new allergen review. The catalog specification for CPP sits on the casein phosphopeptide product page, with the grade axes on the CPP grades page. The parent protein is specified on the micellar casein page, with the form comparison on its grade page. For a hydrolysed protein with a different amino acid profile, see collagen peptides; the HPLC and titration methods are in the methods section, and the release file is described on the quality page. ### 03 Casein phosphopeptides: moisture, heat and the pack URL: https://nutrition.rainwoodbio.com/products/protein-collagen/casein-phosphopeptides/stability/ Reviewed: 2026-11-19 Casein phosphopeptides (CPP) are hygroscopic and heat-sensitive. The powder holds its specification in a sealed, moisture-barrier pack at ambient temperature; a solution is the least stable format, because heat, pH and the calcium equilibrium act at once. Shelf life is assigned from data for the exact pack and storage condition, not from the certificate. In one lineCasein phosphopeptides are hygroscopic and heat-sensitive in solution; the sealed pack and the water activity of the finished formula decide how long the peptide and the calcium figure hold. ## The powder: moisture, caking and colour The catalog moisture ceiling is ≤5.0%. That is a release gate, not a storage allowance. Once the foil pouch is opened, the powder pulls moisture from the air; the loss on drying rises, the as-is protein and peptide figures fall, and the powder can cake. The colour window is the visible signal. A powder that moves from off-white to a darker tan in storage has seen moisture and heat, and the change is worth investigating even if the protein figure still passes. Reseal the pouch properly or transfer the remainder to a smaller moisture-barrier container. The 25 kg drum relies on its inner liner. Keep the liner closed, keep the drum off a concrete floor in a humid store, and record the date of opening. The lot code on the drum, the liner and the certificate should match. ## The solution: heat, pH and the calcium equilibrium The powder dissolves to a clear to slightly turbid solution. In solution, the calcium that the phosphopeptides carry is in equilibrium with the free calcium and phosphate around it, and that equilibrium moves with the pH. A shift in pH, a heat step or a concentration step can move that equilibrium and turn a clear solution turbid or deposit a calcium phosphate sediment. A ready-to-drink process adds a heat load that the powder never sees. A hot fill or a pasteurisation step should be validated on the finished matrix, not on a bench solution. If a clear drink is the target, trial the pH, the mineral content of the water and the hold time together, because the three interact. A protein solution is also a microbial growth medium. Preservation, pH and the hold time belong in the process validation; a preservative that works in a model system may not work at the formula’s pH. ## What drives degradation Factors that move casein phosphopeptides during storage | Factor | What it does | Control | Moisture | Caking; lower as-is protein and peptide | Sealed pouch; desiccant where needed | Heat | Darkens colour; accelerates moisture damage | Cool store; validate the heat step | pH | Shifts calcium phosphate solubility; turbidity | Validate the matrix pH; buffer if needed | Minerals | Calcium and phosphate can precipitate with other ions | Check the water and the mineral premix | Oxygen | Oxidation of the peptide fraction and colour | Low headspace; sealed pack | Microbiology | Growth in a reconstituted solution | Preserve, chill or dry-mix The factors are not independent. A warm, humid store is worse than the sum of the two, and a heated solution at the wrong pH combines all of them. The useful question is not whether CPP is stable but in which pack, matrix and condition it holds its specification for the stated period. ## A stability protocol for the ingredient A useful protocol states the pack, the condition, the time points and the tests. Long-term 25 °C/60% relative humidity and intermediate 30 °C/65% relative humidity cover the warehouse; accelerated 40 °C/75% relative humidity stresses the pack. A moisture-uptake arm, where the pouch is opened and resealed on a schedule, covers the failure mode that a sealed incubator misses. Test protein with its factor and basis, peptide by HPLC, calcium by titration, moisture, appearance, microbiology and, where the formula depends on it, phosphorus. For a beverage, repeat the work in the matrix at the process pH and heat load; for a stick pack, test the strip as well as the powder. Ask for the stability summary for the pack you will buy. A 1 kg pouch and a 25 kg drum have different headspace and different opening histories, and the data belongs to the pack. ## The finished formula changes the answer A capsule or tablet has low water activity, but a hygroscopic fill can pull moisture from the shell or the excipients. Check the moisture and the appearance of the fill after storage, not only at release. A stick pack depends on the seal and the foil. A pinhole is a failure, and the strip should be inspected on the line, not only the powder in the lab. A beverage combines heat, pH, minerals and light. A bar combines low water activity with a heat step and a long shelf life; browning can occur when moisture, heat and a reducing sugar are present. The ingredient’s bulk stability is the starting point, not the answer. ## How the shelf life is set We do not publish one shelf-life number for CPP, because the pack, the storage condition and the finished formula set it. The retest period belongs on the specification and is supported by the stability file for that pack. After the retest period, re-assay the retained sample before extending use. Do not extend by assumption and do not carry a bulk figure across to a repacked container. The product page lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the methods section describes the HPLC and titration assays; the quality page describes the release workflow. ### 04 Casein phosphopeptides: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/protein-collagen/casein-phosphopeptides/moq/ Reviewed: 2026-11-19 The MOQ for casein phosphopeptides (CPP) is 1 kg, supplied as a 1 kg foil pouch; the standard bulk pack is a 25 kg fiber drum. Lead time is 1–7 days for the standard pack. A firm quotation needs the peptide and calcium specification, the quantity and pack, the destination and Incoterm, the documents, and the intended use and market. In one lineOne kilogram is the minimum because it is the smallest standard pack that gives a trial, a retained sample and an independent test from the same lot. ## Why the minimum is 1 kg A 1 kg pack covers a bench trial, a retained sample and an independent identity test. It is small enough to ship as a parcel and large enough to carry a lot code, so the material can be traced from the certificate to the sample. Below 1 kg, the powder is usually split from a larger lot and repacked. That adds handling, loses the original pack identity and makes traceability harder without changing the chemistry. The 25 kg drum is the bulk unit: it reduces handling per kilogram but commits inventory and a longer storage period. The pack is also a barrier decision. CPP picks up moisture, so the foil pouch and the drum liner are part of the specification; a repack into a container that is not a moisture barrier loses the protection the original pack was designed to give. ## Packs and formats Standard casein phosphopeptide packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Particle profile changes The catalog form is an 80 mesh powder: ≥95% through 80 mesh. Granulation is a different physical specification, not a packing choice. If the line needs a coarser or freer-flowing powder, say so before the quotation, because the change moves the particle-size line and may move the lead time. ## Lead time and dispatch The standard pack is quoted at 1–7 days from order confirmation. That window covers picking, document preparation and dispatch; it does not include the shipping transit, customs clearance or the customer’s own quality release. A granulated or non-standard pack adds time, and the quotation should state it separately. Ask for the dispatch date, not only the lead time. A 25 kg drum may travel on a pallet and a 1 kg pouch as a parcel; the Incoterm decides who books the freight and who clears the entry. The documents should travel with the lot, not after it. ## What a quotation needs - Product and source. Casein phosphopeptides (milk), with the peptide and calcium specification. - Specification. Protein with its factor and basis, peptide by HPLC, calcium range, ash, moisture and particle size. - Quantity and pack. 1 kg pouch, 25 kg drum, or granulated on request. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, specification, SDS, allergen statement naming milk, origin statement, and any market-specific declaration. - Intended use and market. Supplement, food or another use, and the market where it will be sold. A quotation without the market and the allergen statement is incomplete. The same powder can fit one destination and need a different document set for another, and the paperwork is part of the offer. Commercial terms are stated on the quotation, not on this page. ## The sample is a lot, not a demonstration The 1 kg pack is the qualification sample. Test identity, peptide, protein with its factor, calcium, ash, moisture and microbiology before scaling, and keep a retained sample from the same pack. The lot code on the sample, the COA and the quotation should match. If the project needs less than a kilogram for a bench trial, discuss it before ordering. A split from a bulk lot is a repack with its own traceability, not the catalog pack, and it should be documented as such. ## Terms to settle before the first order The quotation sets the commercial terms, the Incoterm, the pack, the lead time and the documents. The quality terms belong beside them: the specification revision, the COA per lot, the retained sample, the retest period and the change-control route. A quality agreement is worth having before the first production order. Returns and replacements follow the quotation and the quality agreement. A lot that fails the agreed specification should be handled through the retained sample and a joint re-test, not a photograph of the powder. Ask who pays for the referee test and which laboratory both sides accept. The catalog specification sits on the casein phosphopeptide product page; the release tests are on the COA page; the market files are on the compliance page; the MOQ glossary entry defines the term; the quality page describes the retained-sample system. ### 05 The regulatory file for casein phosphopeptides URL: https://nutrition.rainwoodbio.com/products/protein-collagen/casein-phosphopeptides/compliance/ Reviewed: 2026-11-19 Casein phosphopeptides (CPP) are a milk-derived peptide, and the regulatory question is destination-specific: whether the exact CPP has a route in the market, how the milk allergen is declared, which contaminant limits apply to the product as sold, and whether the label carries any claim. The supplier keeps the specification, the allergen statement and the lot file; the buyer’s regulatory team confirms the route. This page lists the framework and the documents. In one lineThe regulatory file follows the destination: CPP is a milk-derived peptide, and the buyer’s regulatory team confirms the route, the allergen declaration and the claims before the label is set. ## What the file has to answer Four questions. What is the material, and which specification version is being bought? Which lot is being released, and what does its certificate report? Which route and limits apply in the destination? And what changes if the source, the process or the pack changes? The COA answers the lot question, the technical data sheet answers the specification question, and the safety data sheet answers the handling question. None of them answers the route question on its own. The file should also carry the allergen statement, the origin record and any customer-specific declaration, with version numbers rather than a folder of undated PDFs. ## European Union The EU file starts with the general food law, Regulation (EC) No 178/2002, and the food information rules in Regulation (EU) No 1169/2011. Milk and products thereof are on the Annex II allergen list, so a CPP-containing product has to declare milk in the ingredient list and emphasise it. A low-lactose or highly hydrolysed ingredient does not remove the declaration unless the destination provides a specific exemption. Whether the exact CPP is inside the novel-food framework, Regulation (EU) 2015/2283, depends on its history of use and its production process. A peptide fraction made by enzymatic hydrolysis is not automatically outside that regulation because the parent casein has a long history of use. The buyer’s regulatory team checks the current novel-food catalogue and the member state position before the launch. Food supplements fall under Directive 2002/46/EC, contaminants under Regulation (EU) 2023/915, and claims under Regulation (EC) No 1924/2006, as of this review. Great Britain applies the retained GB texts and Northern Ireland applies the EU framework; the two are checked separately. ## United States In the US the route depends on the basis the supplier relies on: a dietary ingredient with a documented history of use, a GRAS basis, or a new dietary ingredient notification under 21 U.S.C. 350b. The supplier names the basis and the supporting document; the buyer confirms that it covers the finished product and the intended use. The facility meets 21 CFR 111 for a supplement or 21 CFR 117 for a conventional food, and the label follows 21 CFR 101. Milk is a major food allergen under FALCPA, so the declaration follows the protein, not the lactose figure. California Proposition 65 may also apply to lead, and its threshold is daily-intake based, so a lot inside a specification can still trigger a warning at a high daily portion. ## Contaminants and limits Contaminant limits · CPP sold as a food supplement, by market | Element | EU food supplement limit | US federal limit | What the file shows | Lead | 3.0 mg/kg | No federal limit specific to supplements; state rules may apply | Lot result, method and finished-product calculation | Cadmium | 1.0 mg/kg; category exceptions apply | No federal limit specific to supplements | Lot result and the category check | Mercury | 0.10 mg/kg | No federal limit specific to supplements | Lot result and method | Arsenic | Not harmonised; member state rules may apply | No federal limit specific to supplements | The agreed limit and the method The EU figures come from Regulation (EU) 2023/915 and apply to the product as sold. An ingredient sold to a food manufacturer is assessed against the limit for the food category it enters, which can be tighter or looser. Arsenic is not harmonised at EU level, so the specification has to state the limit it is tested against. The catalog limits on this site sit inside those frameworks, with arsenic as a customer limit. ## Claims and the label No disease-related claim is permitted in the EU, the US or the UK. As of this review, we have not identified an authorised health claim for casein phosphopeptides as such; the authorised calcium claims attach to calcium, not to the peptide, and they carry conditions of use. The buyer’s reviewer checks the current register. The source-of-calcium condition is at least 15% of the nutrient reference value in the daily dose, which is 120 mg against the 800 mg reference value. At 2.0–4.0% calcium, a 500 mg capsule delivers 10–20 mg calcium, a small fraction of that figure. The protein side is a different calculation. A 500 mg capsule at 80% protein carries about 0.4 g protein, and the claim calculation belongs to the finished product, not to the ingredient name. A claim about calcium absorption is a health claim and needs its own authorisation or notification in the destination; it cannot be carried on the ingredient page or the label without that route. The label names the material as casein phosphopeptides and declares milk. “Dairy-free” and “lactose-free” are separate claims with their own basis, and neither is available for a product that contains a milk-derived peptide. The brand’s reviewer confirms the wording for the market. ## The document pack - Specification with the revision, the peptide method and the protein factor and basis. - Batch COA with results and methods, not only a conformity statement. - Allergen statement naming milk, repeated on the COA. - Origin, non-GMO and, where required, halal or kosher statements. - SDS and the site’s GMP, HACCP or ISO certificates. - Melamine and cyanuric acid statement where the buyer’s market asks for it. - Third-party report where the customer requires one. ## Checklist before the first order - Is the exact CPP and its route confirmed for the destination? - Is milk declared on the label and on the allergen statement? - Do the contaminant results meet the limit for the product as sold? - Is any claim based on the calcium or protein actually delivered, with the arithmetic shown? - Does the file carry the COA with methods, the specification revision and the site certificates? - Has the current text been checked this year, not at the last launch? The catalog specification sits on the casein phosphopeptide product page; the certificate is explained on the COA page; the analytical evidence is on the identity page; the EU and US summaries give the framework; the Annex II entry covers the allergen; the quality page describes the release file. ### 06 How to prove a lot is casein phosphopeptides URL: https://nutrition.rainwoodbio.com/products/protein-collagen/casein-phosphopeptides/identity/ Reviewed: 2026-11-19 A casein phosphopeptide (CPP) lot is identified when four measurements agree: the peptide distribution shows the phosphopeptide fraction, the protein figure carries the right factor and basis, the calcium and phosphorus pair shows the mineral load, and the ash is consistent with it. The name on the certificate is the weakest layer; the calcium figure alone is the second weakest, because an added calcium salt also titrates. In one lineA CPP lot is identified by four agreeing measurements: the peptide profile, the protein figure with its factor, the calcium and phosphorus pair, and the ash that shows the mineral load. ## The four identity layers No single line proves CPP. A protein figure can be met by casein, a calcium figure by a calcium salt, and a peptide figure by another hydrolysate. The layers below are separate questions, and each needs its own evidence. Four layers of casein phosphopeptide identity | Layer | Question | Test | What it proves | Document | Is the material named and sourced? | Name, source, lot, allergen statement | Paperwork and traceability only | Peptide | Is it the phosphopeptide fraction? | HPLC peptide distribution; amino acid profile | The fraction, not the parent protein | Mineral | Is the calcium bound or added? | Calcium by titration; phosphorus by ICP-OES; ash | The mineral load and its consistency | Provenance | Was the process the stated one? | Site, hydrolysis record, membrane step, retained sample | That the lot matches the file The first layer proves intent, not identity, because a document can describe a material that was never made. The other three are evidence, and they are read together. ## The calcium-to-phosphorus pair The phosphoserine clusters carry calcium, and the phosphate is part of the peptide. That makes calcium and phosphorus a pair: in the bound material they rise and fall together with the peptide load, while an added calcium salt raises calcium and ash without raising phosphorus. The molar ratio is the check. Convert both figures to moles (calcium ÷ 40.08, phosphorus ÷ 30.97) and compare the ratio across lots and against the specification. A lot with calcium at the top of the 2.0–4.0% range and a phosphorus figure that has not moved is a lot with added calcium, not a lot with more phosphopeptide. The ash is the third line. At 4.0% calcium the oxide alone is about 5.6% of the powder, and the phosphate adds to it; an ash figure near the 10.0% ceiling is consistent with a high mineral load, while a high calcium figure with a low ash is arithmetically odd and worth a question. Phosphorus is not on the catalog specification. Ask for it when the phosphorylation is the reason for the purchase, when a new source is being qualified, or when the calcium figure is being used to argue that the material is CPP. ## What XRD can and cannot show Casein phosphopeptides are amorphous. A diffractogram shows a broad halo and no crystalline peaks, so XRD cannot identify the peptide or separate CPP from casein, a hydrolysate or a milk protein concentrate. It can show a crystalline mineral phase. Calcium carbonate is crystalline, and a powder that shows calcite peaks has a mineral phase that the calcium figure alone would not distinguish from bound calcium. A calcium phosphate phase may be amorphous or crystalline depending on the process, so a clean diffractogram does not prove that no mineral was added. Use XRD as a screen when the calcium figure is high and the phosphorus figure is low, not as a release test. Ask for the reference pattern and the detection limit before reading a “match” statement. ## What adulteration looks like Substitution routes · what gives them away | Route | Marker | Test | Non-protein nitrogen (melamine, urea) | Protein high; amino acids low | Kjeldahl plus amino acid profile; melamine and cyanuric acid screen | Casein or milk protein added | Peptide low for the protein figure | HPLC peptide distribution | Other hydrolysate (plant, gelatin) | Amino acid pattern shifts; no phosphoserine | Amino acid profile | Calcium salt added | Calcium and ash up; phosphorus flat | Calcium, phosphorus, ash, XRD | Maltodextrin or lactose dilution | Protein, peptide and calcium down together | Protein, peptide, calcium, moisture The first route matters most for a Kjeldahl specification. Melamine is about 67% nitrogen by mass, so a small addition lifts the protein figure without adding a peptide. Urea does the same on a smaller scale. Neither is visible in a protein result; both are visible in the amino acid profile and in a targeted screen. ## How to write identity into the specification - “Casein phosphopeptides (milk); peptide ≥70.0% by HPLC with the integration range stated.” - “Protein ≥80.0% by Kjeldahl, factor 6.38, basis stated.” - “Calcium 2.0–4.0% by complexometric titration; phosphorus reported by ICP-OES.” - “Ash ≤10.0%; moisture ≤5.0%; particle size ≥95% through 80 mesh.” - “Allergen statement naming milk; lot number and site on the COA.” - “No added calcium salt; declare any carrier or mineral addition.” ## Five questions for the supplier - Which hydrolysis and membrane step made this lot, and what is the peptide distribution? - What are the calcium and phosphorus figures, and what is the molar ratio? - What is the protein factor and basis on the certificate? - Can you supply the amino acid profile and a melamine screen on this lot? - If the lot is disputed, will you accept a joint re-test on the retained sample? Five direct answers amount to an identity file. A single protein percentage does not. The product page carries the catalog specification; the COA page shows where each figure sits; the grades page covers the specification axes; the CPP versus casein page takes the parent-protein comparison further; the methods section describes the HPLC, titration and ICP methods; the quality page covers the retained sample. ### 01 What the COA for colostrum basic protein reports URL: https://nutrition.rainwoodbio.com/products/protein-collagen/colostrum-basic-protein/coa/ Reviewed: 2026-11-19 A colostrum basic protein lot is released on a certificate that reports protein by Kjeldahl, IgG by a specific immunoassay, ash, moisture, appearance, the heavy-metal panel, microbiology and particle size. Protein and IgG are not two views of one measurement: the first counts nitrogen, the second counts one class of antibody. Ash is the third figure that decides whether the powder is the fraction it claims to be, because the ion-exchange step that makes the fraction can leave salt behind. In one lineThe certificate stands on three figures that measure different things: protein by nitrogen, IgG by a specific immunoassay, and ash from the salt that the fractionation leaves behind. ## Reading the sheet line by line Read the sheet as a chain rather than a list. A result means something only when the method, the limit and the units sit beside it, because a number without its method cannot be checked. “Conforms” on its own is a verdict with the working hidden. The table below is the catalog sheet for this grade; the lot certificate is where one batch's numbers appear. Release specification · colostrum basic protein | Parameter | Method | Release limit | Appearance | Visual | Off-white to light tan powder | Identification | Protein and peptide profile | Conforms to the reference | Protein (as-is) | Kjeldahl, N × 6.38 | ≥80.0% | IgG | Single radial immunodiffusion | ≥10.0% | Ash | Gravimetric, 550 °C | ≤5.0% | Moisture | Loss on drying | ≤7.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh The identification line is deliberately a profile rather than a single peak. A basic-protein fraction contains several proteins, and a pattern that shows the expected proteins says more than one retention time copied from a reference. ## Protein basis, the nitrogen factor and IgG The protein figure is the one most often quoted without its basis. For a milk protein the Kjeldahl nitrogen is multiplied by 6.38, not by the 6.25 used for many plant proteins. A lot that measures 12.62% nitrogen is 80.5% protein with the dairy factor and 78.9% with the general factor — a 1.6-point difference that can decide a release against a ≥80.0% gate. The second basis is moisture. The catalog writes protein as-is, on the powder as received. The same 80.5% result at 5.8% loss on drying is 85.5% on the dry basis. A certificate that reports dry basis is not wrong, but it cannot be compared with an as-is figure without the moisture number beside it. Put the basis on the assay line itself; a footnote is easy to miss. IgG is reported as-is too, and it is measured by radial immunodiffusion, an antibody-specific method. It counts the IgG that reacts with the antiserum; it does not count total protein and it does not measure lactoferrin. Protein and IgG answer separate questions, which is why the specification carries both and why one cannot be substituted for the other. ## Limit and result Two columns do different jobs. The limit records what was agreed for the grade; the result records what this lot actually measured. When the two are identical on every line, the certificate has been copied from the specification rather than written at the bench, and it says nothing about the batch. What the result column should contain | Parameter | Release limit | Result column | Protein | ≥80.0% as-is, N × 6.38 | A measured percentage and the nitrogen figure behind it | IgG | ≥10.0% | A measured percentage with the standard and the dilution | Ash | ≤5.0% | A measured percentage | Moisture | ≤7.0% | A measured percentage | Heavy metals | Per element | A figure in mg/kg for each element A pass statement closes the argument; it does not replace it. Microbiology needs a count and an absence result, and the metals need one figure per element, because a single total hides which metal is high. An IgG result without its standard and dilution is hard to defend if the lot is later disputed. ## Batch-to-batch variation Colostrum is a biological raw material. The IgG load falls quickly in the days after calving, and it varies with parity, season and the pooling of the milking. A supplier controls it by collecting early, pooling to a target and testing the pooled lot; the certificate shows the result, not the collection window. Ash moves with the ion-exchange elution and the membrane step. A lot eluted with more salt, or washed less thoroughly, carries more ash and less protein in the same weight. The heat load moves IgG and colour: a hotter drying step gives a darker powder and a lower IgG figure while the protein line still passes. Milling moves the 80 mesh result without changing the chemistry. Read the lots as a series rather than one at a time. Follow the IgG-to-protein ratio, the ash figure and the colour together; a ratio that falls while ash climbs points at the fractionation, not at the raw milk. ## Outside testing Outside testing earns its place at four moments: a new supplier, a first entry into a regulated market, an IgG result the two sides read differently, and a fraction claim that the certificate does not actually support. The panel should answer the open question instead of repeating the whole sheet. For the fraction, that means protein by Kjeldahl plus an amino-acid analysis to show the nitrogen is protein nitrogen, IgG by radial immunodiffusion and, if contested, by affinity HPLC, with ash, moisture, ICP-MS and the microbiology set alongside. Add lactoferrin by HPLC when the fraction itself is in question. The catalog does not set a lactoferrin limit, so the figure is evidence about the process rather than a release gate; a powder sold as a basic-protein fraction should show the basic proteins, not only total protein. A screen without a detection limit cannot be read, so ask for the limit on every line. Keep the laboratory sample tied to the lot code so a referee can retest the same powder. ## Supplier comparison Compare six lines, not one: the declared name and species; protein with its nitrogen factor and basis; IgG with its method; ash and moisture; the metals and microbiology; and the pack, lot code and allergen statement. Two offers can agree on protein and still describe different powders if the IgG method or the nitrogen factor differs. The catalog range is on the product page. The tests that separate the fraction from a blend are on the identity page, the alternatives on the grade page, the Kjeldahl and chromatography background in the methods library, and the release route on the quality page. ### 02 Choosing a colostrum basic protein grade URL: https://nutrition.rainwoodbio.com/products/protein-collagen/colostrum-basic-protein/grades/ Reviewed: 2026-11-19 Colostrum basic protein is the 80% protein, 10% IgG fraction of bovine colostrum. The same raw material also yields whole colostrum powder at 70% protein and 20% IgG, and a single basic protein such as lactoferrin at 95% protein. The grade decides how much protein and how much IgG arrive in each gram of powder, what the ash limit is, how the powder flows, and which ingredient name goes on the label. In one lineThe grade decides whether the formula is buying protein density or IgG density: the basic-protein fraction lifts protein, while whole colostrum keeps more IgG in every gram. ## Why the fraction is a grade, not a strength “Basic protein” names a fractionation, not a strength. At the pH of the loading buffer, the basic proteins in colostrum — lactoferrin, lactoperoxidase and part of the IgG — carry a net positive charge and bind to a cation-exchange resin, while the bulk of the whey proteins and the lactose pass through. The bound fraction is eluted by raising the salt concentration, then concentrated and dried. The result is a powder with more protein and less fat and lactose than the starting material, and with a different IgG-to-protein ratio. Four variables define a grade: the raw material (colostrum or mature milk), the fractionation target, the release numbers for protein, IgG and ash, and the physical form. A certificate that matches on protein but not on the fraction describes a different product, and the label has to follow the fraction rather than the protein number. ## The grades side by side Colostrum basic protein against the neighbouring grades | Grade | Protein | IgG | Ash | What it is | Basic protein powder, 80 mesh (catalog) | ≥80.0% | ≥10.0% | ≤5.0% | The basic-protein fraction; the grade on this page | Basic protein, granulated | ≥80.0% | ≥10.0% | ≤5.0% | Same chemistry, coarser particles and less dust | Whole colostrum powder | ≥70.0% | ≥20.0% | — | First milking, separated and dried; fat ≤5.0%, lactose ≤5.0% | Lactoferrin | ≥95.0% | — | ≤1.5% | One basic protein, not the fraction; iron saturation is its grade The last two rows are not substitutes for the first. Whole colostrum carries more IgG per gram but also the fat and lactose that the fraction removes; lactoferrin is a single protein with its own specification and no IgG figure. Two quotations that both say “colostrum protein” can be describing any of these. ## Powder behaviour The catalog grade is an off-white to light tan powder at ≥95% through 80 mesh, which puts most particles below about 177 µm. Colour moves with the season and the drying step; a tan shift within the range is not an identity failure, but a dark or uneven powder is worth a batch record. The powder is hygroscopic and picks up moisture from the air, so the pouch has to be closed between weighings. It disperses in water to a slightly turbid solution, with some foam under shear. That is normal for a protein fraction and it matters in a stick pack or a drink mix: the powder wets slowly and can clump if it is dumped into water, so the formulator usually needs a dispersion step or a granulated grade. Granulation changes the flow and the dust, not the protein or IgG figures. Flow also decides the capsule and tablet line. A fine 80 mesh powder can bridge in a hopper and generate static; a granulated grade runs more evenly but dissolves more slowly. The particle size is a line item on the specification because it changes the process, not because it changes the chemistry. ## Fill weight and dosage form The arithmetic is straightforward and it is where grade mistakes show up. A 500 mg capsule of the fraction carries about 400 mg of protein and 50 mg of IgG at the specification minimums; the same fill of whole colostrum carries about 350 mg of protein and 100 mg of IgG. These are label calculations, not a dose. A formula that declares a specific IgG quantity has to size the fill weight from the grade it actually buys. The dosage form narrows the choice. A capsule or tablet takes the fraction when the fill weight is tight and the protein figure is the claim, and it takes whole colostrum when the IgG figure is the claim. A stick pack or a drink mix suits the fraction when fat and lactose would spoil the mouthfeel, and whole colostrum when a richer, milkier taste is acceptable. A tablet with a high fraction load may need a binder and a lubricant, and the compression trial belongs before the label is written. A beverage adds heat and pH to the decision. The fraction disperses more cleanly than the whole powder, but neither is a heat-stable ingredient; the process and the hold time have to be validated in the matrix, as the stability page sets out. ## Specification lines - “Colostrum basic protein (bovine), basic-protein fraction of colostrum, not whole colostrum.” - “Protein ≥80.0% as-is by Kjeldahl, N × 6.38; the basis and the factor are stated on the certificate.” - “IgG ≥10.0% by radial immunodiffusion; the standard and the dilution are reported.” - “Ash ≤5.0%; moisture ≤7.0%; particle size ≥95% through 80 mesh.” - “Milk allergen statement; species, origin and heat treatment declared.” - “Granulated form on request; granulation does not change the protein or IgG limits.” - “If fat or lactose must be declared, request the figures: the catalog sets neither.” ## When another grade is the better choice Choose whole colostrum when the IgG figure per gram is the target and the fat and lactose can be declared and tolerated; it is the simpler label when the ingredient is already “colostrum”. Choose lactoferrin when the formula needs one protein at high purity and the iron saturation is part of the story. Choose a granulated basic protein when the line cannot handle a fine, hygroscopic powder and the dissolution step can take a coarser particle. The fraction is the wrong choice when the label promises an IgG quantity that a 10.0% minimum cannot reach in the fill weight, or when the specification has to carry fat and lactose lines that this catalog does not set. In both cases the answer is a different grade or a larger fill, not an overage invented at the weigh-up. The catalog range is on the product page; the whole-powder alternative on the colostrum page; the single-protein alternative on the lactoferrin page; the fraction-versus-powder question on the level-four comparison; and the assays in the methods library. ### 02.1 Colostrum basic protein vs whole colostrum: the fraction and the powder URL: https://nutrition.rainwoodbio.com/products/protein-collagen/colostrum-basic-protein/grades/colostrum-basic-protein-vs-colostrum/ Reviewed: 2026-11-19 Colostrum basic protein and whole colostrum powder come from the same first milking and carry the same milk allergen, but they are different specifications. The fraction is specified at ≥80.0% protein, ≥10.0% IgG and ≤5.0% ash; the whole powder at ≥70.0% protein, ≥20.0% IgG, ≤5.0% fat and ≤5.0% lactose. Neither is a stronger version of the other: one buys protein density, the other buys IgG density. In one lineThe fraction and the whole powder are two specifications from one raw material: the basic-protein fraction trades IgG density for protein density, and the label has to name the one in the pack. ## The fraction and the whole powder The basic-protein fraction is made by cation exchange. At the loading pH, the basic proteins of colostrum — lactoferrin, lactoperoxidase and part of the IgG — carry a net positive charge and bind the resin, while most whey proteins, lactose and minerals pass through. The bound proteins are eluted with a salt solution, concentrated and dried. Whole colostrum powder is the first milking separated and dried, with no fractionation step; it keeps the fat and lactose that the fraction largely leaves behind. The names are not interchangeable. “Colostrum” is the whole secretion; “colostrum basic protein” is a fraction of it. A specification that says only “colostrum protein” has not said which one, and the two powders behave differently in a fill weight, a solution and a label. ## The two specifications side by side Colostrum basic protein against whole colostrum powder | Line | Colostrum basic protein | Whole colostrum | Ingredient name | Colostrum basic protein | Colostrum | Protein (as-is) | ≥80.0% | ≥70.0% | IgG | ≥10.0% | ≥20.0% | IgG per 100 g protein at the minimums | 12.5 g | 28.6 g | Ash | ≤5.0% | — | Fat | — | ≤5.0% | Lactose | — | ≤5.0% | Moisture | ≤7.0% | ≤7.0% | Particle size | ≥95% through 80 mesh | ≥95% through 80 mesh The table explains why the two cannot be swapped on the protein number alone. The fraction has the higher protein floor, but at the specification minimums it carries 12.5 g of IgG per 100 g of protein against 28.6 g for the whole powder. The missing lines matter too: the fraction caps ash and the whole powder caps fat and lactose, so each specification answers a different set of label questions. ## The arithmetic that decides the fill Per 100 g, the fraction carries 80 g of protein including 10 g of IgG; the whole powder carries 70 g of protein including 20 g of IgG. To put 5 g of IgG into a batch takes 50 g of the fraction or 25 g of the whole powder. The protein that arrives with it is 40 g in the first case and 17.5 g in the second. That is label arithmetic, not a dose. The point is that the fraction is not an IgG concentrate: it is a protein concentrate that retains IgG at a lower share. A formula that needs both a high protein figure and a high IgG figure may need a blend, a different fraction or a larger fill weight, and the label has to be built from the arithmetic rather than from the ingredient name. The ash and the absent fat and lactose lines carry the same weight as the protein. The fraction's 5.0% ash cap is the residue of the salt elution; a lot close to the cap with protein at the floor is mostly salt and protein. The whole powder has no ash line but answers the fat and lactose questions that the fraction's catalog leaves open. If the label declares either, the choice is made for you. ## What the label has to say The ingredient list has to name the material in the pack. “Colostrum basic protein” describes the fraction; “colostrum” describes the whole powder. A label that says colostrum while the pack is the fraction overstates the IgG per gram; a label that says basic protein while the pack is whole powder understates it and misnames the ingredient. The two statements are not two ways of saying the same thing. Milk is a major allergen in every market that lists it, and both products are milk-derived. The allergen statement names milk and the species is bovine. Fractionation does not remove the allergen, and “purified” or “fractionated” is not an allergen-free statement. The specification, the certificate and the label should use one ingredient name and one allergen wording. ## When to choose each Choose the fraction when the formula is protein-led: a capsule with a fixed fill weight, a tablet that needs a high protein load, a stick pack where fat and lactose would change the mouthfeel, or a blend where the protein figure is the claim. Its slightly turbid solution and low fat make it easier to disperse in water than the whole powder. Choose the whole powder when IgG per gram is the target and the fat and lactose can be declared and tolerated. It is the simpler ingredient to explain on a label that already says colostrum, and its specification carries the fat and lactose figures that the fraction's catalog leaves open. A dairy-style drink or a rich powder stick may prefer it for the mouthfeel as much as for the IgG. ## What changes when you switch A switch in either direction is a specification change, not a substitution at the weigh-up. Re-check the protein and IgG figures against the fill weight, the ash and the fat and lactose data, the allergen statement, the stability of the new powder in the pack, and the label name. Run a sensory check as well: colour, taste and solubility differ between the two powders, and a capsule or stick pack that tasted neutral with one may not with the other. The product page carries the catalog range; the grade page puts this comparison beside the other grades; the colostrum page covers the whole powder; the lactoferrin page covers the single-protein alternative; the methods library covers the assays; and the quality page covers release. ### 03 Colostrum basic protein: heat, moisture and the pack URL: https://nutrition.rainwoodbio.com/products/protein-collagen/colostrum-basic-protein/stability/ Reviewed: 2026-11-19 Colostrum basic protein is a heat-sensitive, hygroscopic powder. Moisture raises water activity and drives browning between residual lactose and protein; heat aggregates IgG and the other globular proteins. The sealed pack and a cool, dry store are what keep the IgG figure meaningful at the end of the shelf life. In one lineHeat and moisture are the two failure routes: moisture raises water activity and browning, heat aggregates IgG, and the pack decides how much of either the powder sees. ## The powder: moisture, water activity and colour The ≤7.0% moisture line is a release condition, not a budget for storage. Once the pouch is open, the powder pulls moisture from the air, the water activity rises and the powder can cake. The colour darkens as lysine on the protein reacts with residual lactose; the reaction is slow at low water activity and faster in a warm, humid store. Lactose is not on the catalog specification for this grade, so the browning risk is not visible from the certificate alone. Ask for the residual lactose or carbohydrate figure if the powder will be stored for a long period or packed in a clear container. A white to light tan powder that turns tan in the pack has picked up moisture or heat, whatever the assay says. Heat and moisture act together. A warm store raises the rate of the browning reaction, and a humid store supplies the water it needs. The combination is worse than either alone, which is why the storage condition belongs in the specification beside the moisture limit. ## The solution: a short-lived intermediate The powder disperses in water to a slightly turbid solution. That solution is not a shelf-stable format: proteins foam under shear, aggregate near their isoelectric point and lose IgG faster as the temperature rises. A ready-to-drink process adds a pasteurisation or hot-fill step that the powder never sees, and the heat load is where most of the IgG loss happens. Where a liquid cannot be avoided, hold the pH away from the isoelectric range, keep oxygen out of the mix, cap the thermal load and measure the hold time in the real matrix. Powder data does not become beverage data: the matrix, the heat step and the container each set their own rate. The solution is a process intermediate with a measured hold time, not a product that borrows the powder's shelf life. ## Failure routes Factors that move colostrum basic protein during storage | Factor | What it does | Control | Heat | Aggregates IgG and other globular proteins; darkens colour | Cool drying and filling; keep the process heat load low | Moisture | Raises water activity; caking; browning with residual lactose | Sealed foil pack; dry store; desiccant where needed | Oxygen | Oxidises protein and lipids; off-flavour | Low headspace; nitrogen flush on request | Light | Fades colour; oxidises lipids and riboflavin | Opaque pack; dark store | pH | Precipitation near the isoelectric point; aggregation in solution | Validate the matrix pH; avoid the precipitation range | Microbial load | Colostrum supports growth once moisture and warmth allow it | Release micro panel; sealed pack; dry store The list is not a set of separate causes. Warmth, light and humidity reinforce one another, and a store that combines them is worse than any single exposure. The question is therefore not whether the protein is stable but whether it is stable in this pack, at this condition, for this long. ## Designing the stability trial Start the protocol with the pack, the condition, the time points and the tests. A 25 °C/60% relative-humidity arm covers the warehouse, a 30 °C/65% arm the intermediate case and a 40 °C/75% arm stresses the pack. Add a light-exposure arm, because a dark incubator cannot see the colour and oxidation route. Test protein, IgG, moisture, appearance, solubility and microbiology at each point. Ash does not move during storage, but it belongs at time zero with the rest of the release panel. Attach the numbers rather than a tick, and name the pack and the lot family in the report. The IgG result is the one that decides the shelf life: a protein figure that holds at 80% while IgG has fallen by a third is a lot that has aged, not a lot that has passed. The summary has to belong to the pack on the order. A report written for another pack in the same family does not answer the question, because the drum and the pouch differ in headspace and in how often they are opened. ## How the formula changes it Capsules and tablets look dry, yet the shell and the excipients can still hand moisture to the fill. Measure moisture at release and again after storage, and look at the fill colour; a tan fill in a white capsule is visible to the consumer even when the assay is inside the limit. On a stick pack the foil and the seal are the barrier, and a pinhole defeats both, so the strip is inspected as well as the powder. A beverage combines heat, pH and oxygen, and a gummy adds a hot cook step. Bulk data is the first input, not the conclusion. An overage is a formulation and label decision; it cannot compensate for a barrier that leaks. ## Setting the retest period A shelf life only means something when it is tied to a pack, a storage condition and a test panel. For this powder the retest period is set for the pack on the order and supported by the file behind it; a bare number is a marketing line, not a specification. At the end of the period, the retained sample is re-assayed before any extension is granted. An assumption is not an extension, and a bulk result does not follow the powder into a new container. Pack options are on the product page; the release panel is on the COA page; pack and lead time are on the MOQ page; the counts are explained in the microbiology method note; and the release route is on the quality page. ### 04 Colostrum basic protein: MOQ, packs and ordering URL: https://nutrition.rainwoodbio.com/products/protein-collagen/colostrum-basic-protein/moq/ Reviewed: 2026-11-19 Colostrum basic protein starts at 1 kg in a foil pouch, with a 25 kg fiber drum as the bulk pack. Standard packs ship in 1–7 days. A firm quotation needs the fraction and the IgG target, the protein method, the pack, the destination and the documents, including the milk allergen statement. In one lineOne kilogram is the unit that carries a lot code, a retained sample and a certificate; the 25 kg drum is the same material with a larger handling load. ## Why the floor is one kilogram A single kilogram supports a bench trial, a retained sample and an outside identity check, and it travels as a parcel when material is needed before the production plan is signed. The pack has a lot code of its own; it is not a scoop from a drum. Smaller quantities come out of a larger lot and are repacked, which adds handling and breaks the link to the original pack without changing the powder. The 25 kg drum works the other way: less handling per kilogram, but more inventory and a longer stay in storage. The minimum is about the pack, not about pressure to buy volume. The fractionation adds a reason to buy a documented pack. A basic-protein lot is made from a pooled colostrum stream, eluted and dried as one batch; the certificate, the retained sample and the pack should all carry the same lot code, because the IgG figure is the result of that pool and that process. ## Pack formats Standard colostrum basic protein packs | Format | Fill | Where it fits | Handling | Foil pouch | 1 kg | Trials and small batches | Barrier to moisture and light; close it after weighing | Fiber drum | 25 kg | Production | Inner liner; keep the drum off a damp floor | Granulated powder | On request | Flow and dust control | Particle profile changes; protein and IgG limits do not | Split sample | 100–500 g | Bench work | Drawn from a released lot; discuss before ordering The catalog form is an 80 mesh powder. A granulated grade or a different mesh changes the specification rather than the pack, so it is agreed before the quotation; it can also move the lead time. ## Lead time and shipping We quote 1–7 days from confirmation for the standard pack. The window covers picking, documents and dispatch; transit, customs and the customer's own release sit outside it. A granulated grade or an unusual pack takes longer, and the quote should put that time on its own line. Get the dispatch date in writing as well as the lead time. Freight is booked on a pallet for a drum and as a parcel for a pouch; the Incoterm sets who pays for the carriage and who clears the entry. Documents travel with the lot, with the allergen statement in the same envelope as the certificate. The powder is shipped ambient in a sealed pack. A hot container or a humid loading bay is the exposure to avoid; if the pack has come out of a cold store, let it reach room temperature before opening, or condensation will form on the powder. ## What a quote has to state A quote is comparable only when it states six things: - Product and fraction. Colostrum basic protein, bovine, with the fraction named and not “colostrum protein”. - Specification. Protein with its nitrogen factor and basis, IgG with its method, ash, moisture and particle size. - Quantity and pack. The 1 kg pouch, the 25 kg drum, or a granulated or split option. - Destination and Incoterm. Where it is going, to a port or a door, and on which trade term. - Documents. COA, TDS, SDS, milk allergen statement, origin, TSE/BSE and any market-specific declaration. - Intended use and market. Whether the use is a supplement, a food or something else, and the country of sale. Leave out the fraction or the market and the offer cannot be checked. The same powder can fit one destination and fall outside the file for another, so the paperwork is part of the offer. Commercial terms appear on the quotation, not here. ## Qualification samples and what they carry A 1 kg pack can serve as the qualification sample. Run protein, IgG, ash, moisture and microbiology before scaling, and retain a portion of the same pack. The lot code on the pack, the COA and the quotation should be one code. Without that link the material is a demonstration, not a qualification. A bench quantity can be drawn from a released lot, but it is a repack and needs its own record. Never assume the bench sample and the production drum share a lot unless the codes match. ## What to agree before the first order The quotation carries the commercial side: Incoterm, pack, lead time and documents. The quality side belongs next to it: the revision that applies, a certificate for each lot, a retained sample, how long the material is retested for, and the route for any change. Settle those before the first production order rather than after the first disagreement. Returns and replacements are governed by the quotation and the quality agreement. When a lot misses the agreed specification, the retained sample and a joint re-test settle it; a photograph of the powder does not. Settle in advance who pays for a referee test and which laboratory both sides will accept. Because the material is milk-derived, the allergen statement and the origin declaration are version-controlled documents: a change to either changes the file, not a detail. Specification detail is on the product page, the release panel on the COA page, the market file on the compliance page, the term itself in the MOQ glossary entry, shipping in the logistics page, and release in the quality page. ### 05 The regulatory file for colostrum basic protein URL: https://nutrition.rainwoodbio.com/products/protein-collagen/colostrum-basic-protein/compliance/ Reviewed: 2026-11-19 Bovine colostrum basic protein is a milk-derived ingredient, so the milk allergen statement is required in every market that lists milk as a major allergen. The route for the fraction — food supplement, novel food or another basis — depends on the destination, and the buyer's regulatory team confirms it. This page lists the framework and the documents that belong in the file. In one lineThe file has to do two things at once: place the fraction on the right route for the destination, and declare the milk source on every label and document. ## The four questions Four questions sit behind the folder. What exactly is being bought, and under which revision of the specification? Which lot is in the drum, and what did its certificate measure? Which limits and labelling rules apply once the powder becomes a finished product? And what happens to the file if the colostrum source, the resin or the drying step changes? The COA answers the lot, the TDS the material and the SDS the handling; the route question needs its own answer. Alongside them go the statements that identify the source: species, origin, allergen, TSE/BSE, GMO, processing aids and heat treatment. Keep a versioned index; a folder of undated PDFs is not a file. ## European Union In the EU, a food supplement is made under Directive 2002/46/EC and the general food law around it. Regulation (EU) No 1169/2011 lists milk and products thereof in Annex II, so the allergen has to be emphasised in the ingredient list. Regulation (EU) 2023/915 sets the contaminant limits and Regulation (EC) No 1924/2006 governs claims. Colostrum has a food history in several member states, but a fraction obtained by ion exchange is a defined material, and its route is checked against Regulation (EU) 2015/2283 and the current novel food catalogue for the destination. As of this review, the buyer's regulatory team confirms the entry and the conditions; the current consolidated text decides, not a summary. ## United States In the United States, a dietary supplement is made under DSHEA and 21 CFR 111, and the label carries a Supplement Facts panel. Milk is a major food allergen under FALCPA, so the “Contains” statement or the ingredient-list emphasis has to name it. The ingredient basis for a colostrum fraction is a pre-1994 marketing history, a GRAS conclusion for the intended use or a new dietary ingredient notification. The supplier states the basis it relies on and the buyer confirms that it covers the finished product and the use. A claim is reviewed on its own, and a Supplement Facts entry does not by itself establish the ingredient basis. ## Contaminant limits Contaminants are judged on the finished product, not on the drum alone. The table gives the usual starting point for a supplement file; the destination text in force and the daily dose fix the final figure. Contaminant limits to confirm for the finished product | Parameter | Typical supplement reference | What the file should show | Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method and the finished-product calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception that applies | Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result and method | Arsenic (As) | Customer or destination limit | The agreed limit and the method, stated on the certificate Protein, IgG and ash are quality parameters, not safety limits. A lot can meet the protein gate and still fail the allergen or the contaminant review, and a contaminant result on the drum has to be converted to the dose before it means anything. ## Claims and the label This page makes no health claim. Any wording that links the ingredient to a body function is a claim that the brand's reviewer has to substantiate for the destination, and a disease-related claim is not available for a food or a supplement. The ingredient name, the IgG figure and the protein figure are composition facts; they are not claims, and they do not license one. The label should describe the material, not a benefit. It should name the fraction, the species and the quantity, and it should use the same wording as the specification. A label that calls the fraction “colostrum” is a naming error before it is a claim question, and a label that promises an IgG quantity has to be checked against the fill weight and the grade. ## The documents, including the allergen statement Milk allergen statement. The file must state that the material is derived from bovine milk and that milk is the allergen to declare. The wording should match the label the customer will print: “Contains: milk” in the United States, the Annex II emphasis in the European Union. A “dairy-free” or “lactose-free” statement is not compatible with this material. The rest of the pack: - Specification with a version number, the protein factor and the IgG method. - Batch COA, TDS and SDS. - Milk allergen statement, matching the label wording. - Species and origin declaration: bovine, with the country of collection or manufacture. - TSE/BSE statement for the bovine source, even though milk is not a specified risk material. - GMO statement and a processing-aid statement covering the ion-exchange resin and the filter aids. - Heat-treatment declaration, because it explains the IgG figure on the certificate. - Veterinary-residue or antibiotic statement where the destination asks for it. ## Pre-order checklist - The specification version, the ingredient name and the fraction are named. - The milk allergen statement matches the label wording for the destination. - The route for the fraction is confirmed by the buyer's regulatory team. - The COA, TDS, SDS, origin, TSE/BSE, GMO and processing-aid statements are on file. - Contaminant figures are recalculated at the finished-product dose. - The label and any claim have been reviewed for the destination. - The source, the resin and the drying step are under change control. Catalog detail is on the product page, the lot certificate on the COA page, the analytical evidence on the identity page, current EU references in the EU regulatory note, the allergen list in the Annex II glossary entry, and the release file on the quality page. ### 06 How we prove a lot is colostrum basic protein URL: https://nutrition.rainwoodbio.com/products/protein-collagen/colostrum-basic-protein/identity/ Reviewed: 2026-11-19 A powder is colostrum basic protein when the measurements describe a basic-protein fraction of bovine colostrum, not merely a powder with 80% protein. Four lines have to agree: the declared name and species, protein by Kjeldahl with the dairy factor, IgG by a specific immunoassay, and the ash and moisture that close the mass balance. A lactoferrin figure by HPLC is the marker that shows a fraction rather than a blend. In one lineIdentity here is a profile, not a single number: total protein, a specific IgG assay, the ash left by the salt step and the basic-protein markers have to describe the same powder. ## The five identity layers A name on a certificate is a claim, not a test. Each layer below asks something different and needs its own evidence; an answer at the first layer alone describes the paperwork, not the powder. Five layers of colostrum basic protein identity | Layer | What it asks | Method | Evidence | Document | Are the material, the fraction and the species named? | Name, species, fraction, origin | Paperwork only | Nitrogen | Is the protein figure real? | Kjeldahl, N × 6.38; amino-acid analysis | Protein quantity, not the fraction | IgG | Is the antibody present? | Radial immunodiffusion | One protein, not the whole fraction | Fraction markers | Is it the basic fraction? | Lactoferrin and lactoperoxidase by HPLC | The fractionation step | Mass balance | Is it diluted or salted? | Ash, moisture, protein | Consistency of the numbers ## The ratios that carry the identity Two ratios are worth calculating on every certificate. The first is IgG per 100 g of protein: at the specification minimums it is 12.5 g for the fraction and 28.6 g for whole colostrum. The second is ash against protein: the fraction caps ash at 5.0%, so an ash figure close to the cap with a protein at the floor describes a lot carrying salt from the elution rather than a lot that is mostly protein. The ratio is not a purity grade. A powder with a higher IgG share is not automatically better; it is closer to the whole powder in composition. The question is whether the ratio matches the ingredient name and the specification. A powder sold as the basic-protein fraction with a whole-colostrum ratio and no lactoferrin marker is a blend or a different fraction until the supplier shows otherwise. The nitrogen factor belongs here too. Protein equals nitrogen multiplied by 6.38 for milk proteins. A certificate that multiplies by 6.25 reports a lower figure for the same powder, and a certificate that does not state the factor has not defined its protein. Ask for the nitrogen figure as well as the protein percentage: the arithmetic should close. ## X-ray diffraction: what it can and cannot prove X-ray diffraction is the wrong primary test for this powder. A spray-dried protein is amorphous, and its diffractogram is a broad halo rather than a set of sharp reflections; the pattern cannot distinguish the basic-protein fraction from whole colostrum or from a whey blend. What XRD can do is show a crystalline diluent or a mineral salt — crystalline lactose, sodium chloride from the elution or a mineral carrier — when the level is above the detection limit. Read “XRD conforms” as a question, not an answer: request the pattern and the reference it was compared with. An unreferenced halo says something about the instrument, not about the fraction. The solid-state question that matters here is whether a crystalline diluent is present, and that belongs to the adulteration review rather than the release panel. ## How substitutions show up Common substitutions and the signals to test | Substitution | What it does | Signal | Test | Whole colostrum | Protein falls, IgG share rises | IgG per 100 g protein above the fraction's range; fat and lactose present | IgG-to-protein ratio, fat and lactose, lactoferrin HPLC | Whey or milk protein | Protein stays high, IgG falls | No IgG response at the 10% claim; lactoferrin missing | Radial immunodiffusion, lactoferrin HPLC, amino-acid profile | Lactoferrin spike | Protein and lactoferrin rise, IgG does not | Lactoferrin high, IgG low for a “fraction” claim | Lactoferrin HPLC, radial immunodiffusion | Non-protein nitrogen | Kjeldahl protein rises without protein | IgG and amino-acid protein do not match the nitrogen | Amino-acid analysis, true-protein calculation | Carbohydrate carrier | Protein and IgG are diluted | Protein below the floor; ash or moisture shifts | Mass balance, XRD for crystalline lactose The non-protein nitrogen route is the safety one: a nitrogen-rich additive inflates the Kjeldahl figure and the powder can pass the protein gate without containing the protein it claims. The other routes are substitutions rather than contaminants, and each one leaves a ratio that does not fit the declared fraction. Colour is a weak signal on its own, because the fraction varies from off-white to light tan from lot to lot. ## Identity lines for the specification - “Colostrum basic protein (bovine), the basic-protein fraction of colostrum, not whole colostrum.” - “Protein ≥80.0% as-is by Kjeldahl, N × 6.38; the factor and the basis are stated.” - “IgG ≥10.0% by radial immunodiffusion; the standard and the dilution are reported.” - “Ash ≤5.0%; moisture ≤7.0%; particle size ≥95% through 80 mesh.” - “Lactoferrin by HPLC reported where the fraction identity is to be demonstrated.” - “Milk allergen statement; species and origin declared; no added carrier and no added protein.” - “No non-protein nitrogen source; amino-acid analysis on request.” ## Six questions to put in writing - Which fraction is this lot, and which proteins does the certificate identify? - What is the nitrogen factor, and is the protein figure as-is or dry basis? - Which IgG method was used, with which standard and dilution? - What are the ash, moisture and lactoferrin figures for this lot? - Can you provide the chromatogram and the amino-acid analysis if the lot is disputed? - Would you re-test the retained sample jointly if a result is disputed? Six direct answers make an identity file; a protein percentage on its own does not. For the full picture, the product page holds the catalog spec, the COA page shows where each figure appears on the certificate, the grade page sets out the neighbouring grades, the level-four comparison puts the fraction against the whole powder, and the compliance page covers the milk allergen and the market file. ### 01 What a bovine colostrum certificate reports URL: https://nutrition.rainwoodbio.com/products/protein-collagen/colostrum/coa/ Reviewed: 2026-11-19 The certificate for a colostrum lot reports appearance, protein by Kjeldahl, IgG by radial immunodiffusion, fat, lactose, moisture, heavy metals, microbiology and particle size. Each line carries its method and its release limit, and the measured result sits in its own column. The limits in the tables below are the catalog specification; the batch COA is the document that confirms one pack. In one lineA colostrum certificate is read in two layers: the protein figure needs its nitrogen factor, and the IgG figure needs the immunodiffusion method beside it. ## The certificate as a test report A certificate is worth reading closely when it can be audited line by line. Each parameter needs the analyte, the method behind the number and the limit the lot was judged against. A row that offers only “conforms” hands the reader a verdict in place of the evidence, and this is a material where that shortcut costs money. Two rows decide the material. The protein row says how much protein is in the powder; the IgG row says how much immunoglobulin survived the process. They are measured by different techniques, and they can move in opposite directions. Identity, protein, IgG, fat, lactose and release limits · colostrum powder | Parameter | Method | Release limit | Appearance | Visual | Off-white to light tan, free-flowing powder | Protein | Kjeldahl nitrogen × 6.38 | ≥70.0% | IgG | Radial immunodiffusion | ≥20.0% | Fat | Solvent extraction | ≤5.0% | Lactose | Enzymatic or HPLC | ≤5.0% | Moisture | Loss on drying | ≤7.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh ## The protein factor, the IgG method and the moisture basis The protein figure is a nitrogen figure multiplied by a factor. For milk and milk products the convention is 6.38 rather than the 6.25 used for most plant proteins, because nitrogen is not quite 16% of the mass of milk protein. The gap matters: 70.0% on the 6.38 factor reads 68.6% on 6.25 from the same nitrogen result. The certificate should print the factor beside the protein row, and the specification should name it. The IgG figure is a percentage of the powder as received. A lot at 5.0% moisture carries 21.1% IgG on the dry basis, so a comparison between two certificates is valid only when both are on the same basis. The as-is basis is the commercial one, because it is what the capsule is filled with. Radial immunodiffusion is not a total-protein test. The sample diffuses into an agarose gel that contains antibody raised against bovine IgG, a precipitation ring grows, and the ring diameter is read against a standard curve. A partly unfolded IgG can fail to precipitate, so the result follows the drying and holding history of the lot as well as its composition. Read the two rows together. At the catalog limits, 20.0% IgG against 70.0% protein is a ratio of about 0.29, and that ratio is the quickest sanity check on a certificate. A powder that reports 70% protein and 5% IgG is not the same material at a lower assay; it is a different fraction. ## Release limit versus batch result Two numbers belong in two columns. The limit is where the lot had to sit to be released; the result is what the laboratory found in that particular pack. Collapsing them into one column turns the certificate into a copy of the specification, and the reader loses the only evidence the document exists to carry. What the result column should contain | Parameter | Release limit | Result column | Protein | ≥70.0% by Kjeldahl, factor stated | A measured percentage and the factor used | IgG | ≥20.0% by radial immunodiffusion | A measured percentage, the standard and its lot | Fat and lactose | Fat ≤5.0%; lactose ≤5.0% | A measured percentage for each | Moisture | ≤7.0% | A measured percentage | Heavy metals | Per element | A figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot “Passes specification” is a conclusion the reader should be able to reach from the numbers. For IgG that means a percentage plus the method and the standard; for microbiology a count and an absence statement; for heavy metals a figure per element rather than a single total. ## What moves between batches Colostrum is a collected raw material, and the collection varies. The season, the parity of the cow, the interval between calving and the first milking and the herd all move the IgG and the protein in the raw fluid. Manufacturers meet a fixed specification by blending lots, so the certificate describes the blend rather than the raw collection. Process steps move the other lines. Skimming sets the fat, lactose reduction or ultrafiltration sets the lactose, and the dryer sets the moisture and the colour. The 80 mesh figure is a finishing specification: it changes when the mill or the sieve changes, without any change in the chemistry. IgG deserves a trend chart. One result just above the limit is a release, but three lots drifting downward point to a drying step, a hold time or a raw-material selection worth a conversation before the next order. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a grade claim the supplier's certificate does not prove, or a disputed result. The useful panel is not a full repeat. It is IgG by radial immunodiffusion with the standard named, protein by Kjeldahl with the factor, fat, lactose, moisture, ICP-MS for the heavy-metal panel, microbiology and a species check on the protein. A second IgG method is worth the cost when the number is the claim. An ELISA and a radial immunodiffusion assay can disagree because the two antibody systems see different parts of the molecule; ask for both results and both detection limits. Chain of custody matters. The sample tested should be the sample retained, and the report should name the lot. If a result is disputed, hand the referee the retained sample, the certificate and the specification, and ask for the separation tests rather than a repeat of the same assay. ## What to compare between suppliers Six lines make the comparison: the protein value with its factor, the IgG value with its method and standard, fat and lactose, moisture, the process temperature and the allergen and origin statements. Two quotations can agree on protein and disagree on IgG, fat and lactose, and then they describe two different powders. Then check traceability: who collected the raw colostrum, how soon after calving, which drying step was used, and which lot code appears on the pouch, the drum and the retained sample. The catalog ranges are on the colostrum product page. The tests that separate colostrum from milk powder are on the identity page, the grade ranges on the grade page, the assay notes under methods, and the release workflow is set out on the quality page. ### 02 Colostrum grades: the four figures that set the powder URL: https://nutrition.rainwoodbio.com/products/protein-collagen/colostrum/grades/ Reviewed: 2026-11-19 Colostrum is sold as a whole powder, a higher-IgG powder, a basic-protein fraction and an IgG isolate. The catalog grade is protein ≥70.0% with IgG ≥20.0%, fat ≤5.0% and lactose ≤5.0%. The grade is a set of four figures rather than one, and the IgG figure is the one that decides how much powder a capsule or a stick pack needs. In one lineThe grade is set by the IgG figure and the protein basis together, and the fat and lactose limits are what separate a colostrum powder from a milk powder. ## Why the grades exist Colostrum is not a single article of commerce. The raw fluid can be skimmed, its lactose reduced, its casein and whey proteins separated, and its immunoglobulin fraction isolated. Each step changes the four figures that define the powder, and each step has a customer who wants it. The catalog grade sits in the middle: it keeps the protein complement of the secretion while removing most of the fat and the lactose. A grade that pushes IgG to 30% or beyond has been fractionated or blended with an immunoglobulin concentrate. A grade that raises protein to 80% while dropping IgG to 10% is a basic-protein fraction, not a stronger colostrum; the basic protein is a separate product for that reason. The choice is not a quality ladder. A buyer who needs a declared IgG quantity in a small capsule is not served by a higher protein figure, and a buyer who wants the whole secretion is not served by an isolate. ## The grade families side by side Colostrum grade families and the figures that define them | Grade | Protein | IgG | Fat | Lactose | Whole colostrum powder (catalog) | ≥70.0% | ≥20.0% | ≤5.0% | ≤5.0% | Higher-IgG colostrum powder | ≥70.0% | ≥30.0% | ≤5.0% | ≤5.0% | Colostrum basic protein | ≥80.0% | ≥10.0% | — | — | IgG isolate | ≥90.0% | ≥90.0% | ≤1.0% | ≤1.0% A dash means the limit belongs to the individual specification rather than to this table. The basic-protein fraction is sold on protein and ash, with ash ≤5.0% as its usual companion limit; its fat and lactose are set case by case. The higher-IgG powder is a specification that can be agreed on request, not a second catalog grade. ## Fat, lactose and how the powder behaves The fat and lactose limits are not housekeeping. Fat carries the colour and the odour, lowers the flow of the powder in a humid room and gives the product a lipase-driven off-note on storage. Lactose is the line that separates colostrum from milk powder, and it also matters in the capsule: a lactose-reduced powder is the easier starting point for a blend that has to keep its water activity low. The catalog form is ≥95% through 80 mesh. That is a fine powder, and fine colostrum powder is cohesive and dusty; granulation on request gives a freer flow on a stick-pack line, at the cost of a different particle-size specification. Both forms disperse in water to a slightly turbid liquid, because the residual fat and the protein do not give a clear solution. Colour runs from off-white to light tan and moves with the season, the skim and the dryer. A darker lot inside that window is not automatically a failure, but a colour shift paired with a fat figure at the top of the range or an odour change is worth investigating before the lot goes into a blind capsule. ## Dose arithmetic and the fill IgG is the figure a dose is built on, and the grade decides the mass. One gram of IgG needs 5 g of the 20% grade, 3.3 g of a 30% grade or 1.1 g of a 90% isolate. Those are arithmetic examples, not a recommended intake. The capsule calculation follows the same route. A 500 mg fill of the catalog grade carries about 100 mg of IgG; the same fill of a 30% grade carries 150 mg; a 500 mg fill of the isolate carries 450 mg. A formulator who writes “500 mg colostrum” on the label has declared 500 mg of powder and about 100 mg of IgG, and the two statements are not interchangeable. An excipient dilutes the IgG per gram, so the overage belongs in the fill weight rather than in the assay. Work the blend's IgG figure out from the ingredient certificates instead of assuming that the powder figure survives the fill. ## What to write into the specification - “Bovine colostrum powder, with the collection window stated.” - “Protein ≥70.0% by Kjeldahl with the factor 6.38 named.” - “IgG ≥20.0% by radial immunodiffusion, with the reference standard named.” - “Fat ≤5.0%, lactose ≤5.0%, moisture ≤7.0%.” - “Particle size ≥95% through 80 mesh; heavy metals and microbiology as listed.” - “Process temperature stated; the milk allergen and bovine origin declarations on file.” The process line is the one buyers leave out. IgG is a protein, and a drying step that runs hot is a specification change even when every chemical line still passes. ## When the whole powder is the wrong choice Whole colostrum is the wrong choice when a single capsule has to carry a high IgG dose. A 500 mg capsule cannot deliver more than the IgG the grade contains, and the answer is a stronger grade or a different format rather than a larger capsule. It is also the wrong choice when the label declares an IgG quantity as the ingredient, and when the destination classifies an immunoglobulin fraction as a different article from the whole powder. The product hub carries the catalog ranges. The level-four page compares the whole powder with the isolate, the lactoferrin page shows a single-protein milk ingredient for comparison, the whey concentrate page is the reference for a commodity milk protein, and the COA page shows where each figure comes from. ### 02.1 Colostrum vs IgG: the whole powder and the isolate URL: https://nutrition.rainwoodbio.com/products/protein-collagen/colostrum/grades/colostrum-vs-igg/ Reviewed: 2026-11-19 Whole colostrum powder and an IgG isolate are two different commercial articles. The catalog powder is ≥70.0% protein with ≥20.0% IgG, ≤5.0% fat and ≤5.0% lactose; a purified IgG fraction is ≥90.0% IgG with almost no fat or lactose. The same IgG dose therefore weighs about a fifth as much from the isolate, and the label names a different ingredient. In one lineWhole colostrum is 20% IgG and about 70% protein; an IgG isolate is over 90% IgG with almost no fat or lactose, so the same IgG dose weighs a fifth as much and the label names a different ingredient. ## The whole secretion and one protein Colostrum is the first milk after calving, and a powder made from it keeps the protein complement of that secretion: immunoglobulins, lactoferrin, growth factors and the casein and whey proteins around them. An IgG isolate starts from colostrum or from a whey stream and keeps one class of protein. The two share an origin, not a composition. That difference shows in four figures. Whole colostrum carries about 29% of its protein as IgG; an isolate carries nearly all of its protein as IgG, and almost no fat and lactose, because the process removed them. One is not a better grade than the other. They are two positions along the same separation, and a buyer is choosing a position, not a rank. ## The figures side by side Whole colostrum powder against an IgG isolate | Figure | Whole colostrum powder | IgG isolate | Protein | ≥70.0% | ≥90.0% | IgG | ≥20.0% | ≥90.0% | IgG as a share of protein | About 29% | Above 95% | Fat | ≤5.0% | ≤1.0% | Lactose | ≤5.0% | ≤1.0% | Other milk proteins | Present | Largely removed | Typical label | Colostrum | Immunoglobulin G The isolate figures are a specification that can be agreed for a fractionated grade. The point of the table is the gap between the rows, not the exact value of any single line: protein and IgG converge in an isolate and diverge in the whole powder. ## The dose arithmetic IgG is the figure that decides the mass. One gram of IgG needs 5 g of whole colostrum at 20%, or about 1.1 g of an isolate at 90%. A 500 mg capsule of the whole powder carries about 100 mg of IgG; a 500 mg capsule of the isolate carries about 450 mg. That arithmetic is what turns an IgG target into a fill weight. It also decides the format. A capsule holds roughly 500–800 mg of powder, so a high IgG dose from whole colostrum needs several capsules or a stick pack. The isolate fits the same dose into one or two capsules, and brings less fat, less lactose and less of the rest of the secretion with it. Those are arithmetic examples, not a recommended intake. ## What the label can say The label wording follows the article rather than the origin. A product labelled “colostrum” declares the whole powder and its quantity; a product labelled “immunoglobulin G” declares the fraction. Declaring 500 mg of colostrum and implying 500 mg of IgG is a labelling error, and declaring an IgG quantity while using the whole powder means the declared figure has to be calculated from the IgG result of the lot. The allergen does not change. Both articles are milk products, so the milk declaration is required in the EU and the United States, however low the lactose figure is. A low lactose number is a composition statement, not an allergen exemption. ## How a certificate tells them apart Two ratios do the work. The IgG-to-protein ratio is about 0.29 in whole colostrum and close to 1 in an isolate, and the fat and lactose figures are a few percent in the whole powder against 1% or less in the isolate. A certificate that reports 90% IgG and 70% protein is internally inconsistent and needs an explanation, because IgG is measured as protein. Both articles are measured by radial immunodiffusion for the IgG and by Kjeldahl for the protein, so the methods do not separate them. The arithmetic does. That is why a certificate should be read as a set of figures that have to agree, not as a list of passes. ## Storage and the fat question The whole powder carries up to 5.0% fat and up to 5.0% lactose, and both are storage liabilities that an isolate largely avoids. Fat oxidises and gives an off-odour in a warm store; lactose with protein browns as water activity rises. The isolate has less of each, so its storage risk is concentrated in the IgG itself, which is still heat-sensitive. Neither article is the stable one by default. The pack, the temperature and the time decide, and the retest period belongs to the article and the pack that were tested. The stability page sets out the protocol and the failure routes. ## When to choose which Choose whole colostrum when the label names colostrum, when the format carries a few grams of powder, and when the rest of the secretion is part of what the customer is buying. Choose an isolate when the label declares an IgG quantity, when the dose has to fit in a small capsule, or when fat and lactose are the constraint. Switching in either direction resets the specification, the label and the stability work. Name the article, the IgG figure and the basis in the purchase order, and confirm the destination route for the exact fraction rather than for colostrum in general. The product hub carries the catalog specification, the grade page places both articles in the wider range, the COA page shows where each figure comes from, and the lactoferrin and whey concentrate pages show the neighbouring single-protein and commodity options. ### 03 Colostrum stability: why the IgG figure falls first URL: https://nutrition.rainwoodbio.com/products/protein-collagen/colostrum/stability/ Reviewed: 2026-11-19 Bovine colostrum powder loses IgG faster than it loses protein. Moisture and heat are the two drivers, the powder picks up water from a humid room, and the immunodiffusion result falls while the Kjeldahl figure stays where it was. The powder holds its IgG longest in a sealed foil pack at ambient temperature; a solution and a hot process step are the formats that cost it. In one lineProtein survives storage better than IgG: moisture and heat lower the immunodiffusion result while the Kjeldahl figure barely moves, so the shelf life belongs to the IgG test. ## The powder: water activity, browning and fat Moisture is capped at 7.0% at release, and that figure is a gate the lot has to pass, not a budget the powder can spend in storage. Once the pouch is open, the powder equilibrates with the room. Water activity rises, the powder turns cohesive, and the reactions that cost quality begin: IgG unfolding and aggregation, browning between the lactose and the protein, and oxidation of the residual fat. Browning is the colostrum-specific route. The powder carries a reducing sugar and a high protein concentration in the same particle, and the two react faster as water activity and temperature rise. The visible sign is a darker tan powder; the analytical sign is a lower soluble protein and a changed colour. A pack that holds the water activity down slows the reaction until it is no longer the limiting factor. Fat is the other route. At the ≤5.0% limit there is still enough lipid for a lipase or an oxidation off-odour to develop in a warm store. Odour is the first signal on this material, and a trained nose is worth more than a peroxide value. Folding an opened pouch over is not the same as the heat seal it arrived with: the headspace now holds room air. Decant the remainder into a small opaque container, or use it inside the stated in-use period. ## The solution is the harder format In water the IgG meets heat, pH, shear and time at once. A pasteurisation step or a hot fill adds a heat load that the powder never sees, and the immunodiffusion result after that step can sit well below the figure on the incoming certificate. The solution is also slightly turbid, which is expected: the protein and the residual fat do not give a clear liquid. If a liquid is the target, keep the heat load as short as the process allows, hold the pH away from the extremes, fill clean and cold, and validate the hold time before the filler starts. A stability result from another matrix does not transfer. The drink has its own pH, its own process and its own pack, and its shelf life has to be measured in the drink. ## What drives the loss Factors that move colostrum powder and its solution | Factor | What it does | Control | Heat | Unfolds IgG; the immunodiffusion result falls before protein does | Low-temperature process; cool store | Moisture | Raises water activity; caking and browning | Sealed pouch; dry room; desiccant where needed | Water activity in the matrix | Drives browning in a bar or a stick blend | Formulate below the critical range | Oxygen | Oxidation of the residual fat | Low headspace; sealed pack | Shear and foam | Unfolds protein at the air interface | Low-shear transfer; avoid over-mixing | Metal ions | Colour and flavour change in solution | Stainless contact; no iron or copper | Light | Off-flavour in a clear pack | Opaque or foil pack The factors compound. A warm, humid store costs more than heat and moisture counted separately, and a clear bottle of solution left on a bench adds light to the same hour. ## A stability protocol for the ingredient Name the pack, the condition, the time points and the tests before the study starts. 25 °C/60% relative humidity is the long-term arm and 30 °C/65% relative humidity the intermediate one; 40 °C/75% relative humidity accelerates the pack and gives the earliest signal on the IgG. Test IgG by radial immunodiffusion, protein by Kjeldahl, fat, lactose, moisture, water activity, appearance and odour, and microbiology at each point. The IgG decides the retest period; the other parameters explain why it moved. Report the individual results rather than a pass statement, and identify the pack and the lot family in the report. Request the file for the pack on the order: a pouch and a drum differ in headspace, in opening history and in surface-to-volume ratio, so the data belongs to the pack rather than to the product family. ## The finished formula changes the answer A capsule or a tablet is the gentlest format: low water activity, no heat in the fill, and a shell that keeps air away from the powder. The risk is the excipient. A hygroscopic filler or a wet granulation step can raise the water activity inside the shell, so check the moisture of the blend and not only of the incoming powder. A stick pack depends on the foil and the seal. A pinhole is a failure, and a stick stored in a warm, humid place shows caking before it shows a lower IgG. A protein bar is the hardest matrix: water activity, mixer shear and ambient shelf life all work against the IgG, and a bar needs its own study. A ready-to-drink product puts the heat step back into the process. If the fill is hot, the IgG loss happens during manufacture, and the storage study measures what is left rather than what was added. ## How the shelf life is set There is no single shelf-life figure for colostrum powder: the pack and the storage condition decide the retest period, and the figure belongs on the specification with its condition beside it. A period quoted without a pack is a claim rather than a shelf life. Past the retest period, re-assay the retained sample before extending use, and extend on the IgG result. An assumption is not a basis for extension, and a bulk figure does not follow the powder into a repacked container. The product hub lists the standard packs, the COA page covers the release tests, the MOQ page covers pack and lead time, the assay notes sit under methods, and the quality page covers release and retention. ### 04 Colostrum powder: MOQ, packs and ordering URL: https://nutrition.rainwoodbio.com/products/protein-collagen/colostrum/moq/ Reviewed: 2026-11-19 Colostrum powder starts at a 1 kg foil pouch, with a 25 kg fiber drum as the bulk pack. The catalog grade leaves 1–7 days after the order is confirmed. A firm quotation needs six details: the grade and its IgG figure, the protein basis, quantity and pack, destination and Incoterm, the documents and the intended market. In one lineOne kilogram is the commercial minimum because it carries a lot code: a trial, a retained sample and an independent IgG test all come from the same sealed pack. ## Why the minimum is 1 kg A kilogram is enough for a bench trial, a retention sample and an outside IgG test, and it travels as a parcel rather than on a pallet. That is why it is the minimum: the pack carries its own lot code and certificate instead of being decanted from a drum. An order below a kilogram almost always means a repack from a larger lot, which adds a handling step and a traceability gap without improving the powder. The 25 kg drum lowers the handling per kilogram, but it commits inventory and a longer storage period for a hygroscopic material. The minimum is a pack decision, not a volume incentive. ## Packs and formats Standard colostrum powder packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial work and small batches | Moisture barrier; reseal once opened | Fiber drum | 25 kg | Production runs | Lined drum; lot code inside and out | Granulated powder | On request | Flow and dust control | Particle profile changes | Higher-IgG grade | On request | A larger IgG dose per gram | IgG figure and blend composition change The catalog form is a fine powder, ≥95% through 80 mesh. Granulation is a specification change rather than a packing option: the sieve figure moves, and the schedule can move with it. Say so before the quotation if the stick-pack line needs a freer flow. ## Lead time and dispatch The catalog grade leaves 1–7 days after the order is confirmed. That window covers picking, the documents and dispatch; transit, customs clearance and the customer's own quality release sit outside it. A granulated or higher-IgG grade is made to specification, and the quotation gives its own schedule. Colostrum is a collected raw material, so a repeat order of a specific grade depends on the raw-material selection behind it. For a seasonal project, place the repeat order before the trial stock is used up rather than after, and ask for the dispatch date as well as the lead time. Ask who books the freight and who clears the entry. The documents should travel with the lot, not after it, and the pack size decides whether the shipment moves as a parcel or on a pallet. ## What a quotation needs Six items make a quotation firm enough to compare: - Product and grade. Bovine colostrum powder, with the IgG figure and the protein figure written out. - Specification. Protein with its factor, IgG with its method, fat, lactose, moisture, particle size, heavy metals and microbiology. - Quantity and pack. 1 kg pouch, 25 kg drum, granulated or a higher-IgG grade. - Destination and Incoterm. The country, the delivery point and the trade term that applies. - Documents. COA, specification, SDS, the milk allergen statement and any market-specific declaration the importer needs. - Intended use and market. Whether the powder goes into a supplement, a food or another application, and the country of sale. A quotation that omits the grade or the destination cannot be compared with another. The same powder can suit one market and fall outside the file in another, and the documents are part of what is being offered. Commercial terms sit on the quotation. ## The sample has to carry a lot code A kilogram is enough to qualify the material. Test IgG by radial immunodiffusion, protein, fat, lactose, moisture and microbiology before scaling, and keep a retained sample from the same pack. One lot code should link the sample, the COA and the quotation. If a bench trial needs less than a kilogram, say so before ordering. A split from a bulk lot is a repack with its own traceability, and it should be documented as one. A bench sample and the production drum may come from different lots, so check the numbers. ## Terms to settle before the first order Incoterm, pack, lead time and documents are set on the quotation. The quality terms sit beside them: which revision of the specification applies, a COA with every lot, the retained sample, the retest period and the route for a change. Settle those in a quality agreement before the first production order rather than after the first argument. Returns and replacements follow those two documents. A lot that fails the agreed specification is settled on the retained sample and a joint re-test, not on a photograph of the powder. Agree on an acceptable laboratory before a result is contested. The product hub carries the catalog specification, the COA page lists the release tests, the compliance page covers the market files, and the quality page covers the release file. ### 05 The regulatory file for bovine colostrum URL: https://nutrition.rainwoodbio.com/products/protein-collagen/colostrum/compliance/ Reviewed: 2026-11-19 Bovine colostrum reaches food-supplement markets under general food law, and what decides a launch is narrower than the permission question: the milk allergen statement, the contaminant results, the label wording and the documents that name the bovine source. The buyer's regulatory team confirms the route for the destination. This page lists the framework and the papers that belong in the file, so the specification and the commercial pack can be reviewed together. In one lineThe specification describes the powder; the regulatory file names the milk allergen, the contaminant results and the route that the buyer's team confirms for the destination. ## What the file has to answer A supplier file has to close four gaps before a launch. It has to define the material and pin the revision of the specification being bought. It has to connect a released lot to its certificate. It has to show the limits and label rules that apply to the finished product in the destination. And it has to say what happens when the source, the process or the pack changes. The certificate answers the lot question, the technical data sheet answers the specification question, and the safety data sheet answers the handling question. None of the three settles the route question, which is why the file needs a written statement of the basis, matched to the market. Colostrum is a product of animal origin and an ingredient in its own right. The raw-material records, the veterinary status of the herd and the hygiene controls behind the powder are part of the supply chain, and a buyer who asks for the process description and the origin declaration is asking the right questions. ## The European Union A colostrum powder for food supplements sits under Directive 2002/46/EC and the general food law around it, with Regulation (EU) No 1169/2011 for labelling, Regulation (EC) No 1924/2006 for claims and Regulation (EU) 2023/915 for contaminants. The permission question is separate, and it is settled per material: colostrum, a defatted colostrum, a basic-protein fraction and an IgG isolate are different articles, and each has to be checked against the current novel-food catalogue rather than assumed from the history of the whole secretion. The allergen rule is the one that catches formulators. Annex II of Regulation 1169/2011 lists milk and products thereof, including lactose, so the finished supplement must name milk in the ingredient list and give it the emphasis the regulation requires. A “may contain milk” note is not a substitute for declaring an ingredient that is present. This page describes the framework as of this review. The consolidated text of each instrument, and the position for the exact material, decide. ## The United States A dietary supplement containing colostrum is made under 21 CFR 111 and labelled with a Supplement Facts panel. The ingredient basis has to be stated in writing: whether the material is a pre-1994 dietary ingredient, is covered by a GRAS conclusion for the intended use, or has a new dietary ingredient notification. Those are three different routes, and the customer's own filing depends on which one applies. Milk is a major food allergen under FALCPA, so the label carries the milk declaration through the “Contains” statement or the ingredient-list emphasis. The supplier's allergen statement should use wording that the customer's label can adopt without translation. Proposition 65 is a separate warning regime that can apply to lead even where the federal rules set no limit. ## Contaminants and microbiology A drum result is the starting figure, not the answer: the finished-product dose turns it into what the consumer takes. The table below pairs the catalog limits with the reference a supplement file usually starts from; the current destination text and the daily dose decide the final number. Catalog limits against the usual supplement reference | Parameter | Catalog limit | Reference to confirm | Lead | ≤3 mg/kg | EU supplement maximum 3.0 mg/kg; Prop 65 | Arsenic | ≤2 mg/kg | No EU supplement level; member-state rules | Cadmium | ≤1 mg/kg | EU supplement maximum 1.0 mg/kg | Mercury | ≤0.1 mg/kg | EU supplement maximum 0.10 mg/kg | Total aerobic count | ≤1,000 cfu/g | Contractual; no EU supplement count | Yeast and mould | ≤100 cfu/g | Contractual release criterion | E. coli and Salmonella | Absent | Contractual release criterion A lot released against these limits sits on the EU maxima rather than below them, which leaves the finished-product calculation no headroom to absorb; a customer who wants margin should write a tighter internal limit. Microbiology is not harmonised for supplements in the same way, which makes the counts contractual and worth writing into the specification. ## Where the claims stop An EU health claim is usable only when it appears in the authorised register under Regulation (EC) No 1924/2006 and the wording and conditions of use match the entry; a disclaimer does not turn an unauthorised wording into a permitted one. US labelling allows structure or function statements with the DSHEA disclaimer and does not allow disease claims. The UK applies retained equivalents. Each of these reviews the wording on the finished label, not the ingredient's specification, and a certificate cannot approve a claim. This site makes no physiological claim for colostrum. The pages describe identity, composition, process behaviour and documents. “IgG ≥20.0%” is a specification term, not a claim, and it should be defined so that the pack and the certificate mean the same thing. ## The documents a file needs - The specification, with protein and its factor, IgG and its method, fat, lactose, moisture, particle size, metals and microbiology. - The batch COA for the lot, with the same parameter set and the lot number. - The technical data sheet and the storage and retest statement for the pack. - The milk allergen statement, in the wording the destination label will use, including the lactose position. - The origin and species declaration: bovine, with the milk source and the country of collection. - A TSE/BSE statement covering the bovine source, even though milk is not a specified risk material. - The contaminant and microbiology reports, and a stability summary for the grade and pack sold. - A third-party report when the destination market or the customer's own procedure asks for one. Keep the versions together: a specification, a certificate and a label on different revisions will not survive a border check. ## The release checklist - Does the COA name the lot, the grade and the IgG method? - Is the protein figure accompanied by its nitrogen factor? - Does the allergen statement name milk in the wording the label will use? - Do the heavy metals sit inside the catalog limits, and does the customer want a tighter internal limit? - Is the ingredient basis for the destination stated in writing, for this exact material? - Does one lot number appear on the pack, the COA and the retained sample? - Has the claim wording been reviewed separately from the specification? The product page carries the catalog specification, the identity page shows the tests behind the source statement, the MOQ page shows how the documents attach to an order, the methods notes describe the assays, and the quality page holds the release file. ### 06 How we prove a colostrum lot is colostrum URL: https://nutrition.rainwoodbio.com/products/protein-collagen/colostrum/identity/ Reviewed: 2026-11-19 A colostrum lot is identified by measurements that have to agree: IgG by radial immunodiffusion, protein by Kjeldahl with its factor, fat and lactose, and the ratios between them. The ratios are the part that catches a substitution, because a milk powder can be pushed towards a protein figure but not towards a colostrum IgG profile. In one lineIdentity is the ratio, not a single figure: IgG at 20% of the powder and about 29% of the protein, with lactose under 5%, is a colostrum profile that milk powder cannot copy. ## The four layers The first layer is the IgG result. Radial immunodiffusion against a bovine IgG standard gives a precipitation ring whose diameter is read from a curve, and the figure is specific to the immunoglobulin rather than to protein in general. It is also the layer a blender finds hardest to fake, because a low-IgG powder can only be lifted by adding an IgG source. The second layer is the protein figure with its method and its factor. Kjeldahl nitrogen × 6.38 is the dairy convention; a certificate that omits the factor has not defined the number. The protein figure also has to be read against the IgG figure, because the two are not independent. The third layer is the fat and lactose pair. Skimming sets the fat and a lactose-reduction or ultrafiltration step sets the lactose, and the pair is what separates a colostrum powder from a milk powder at a glance: mature milk powders carry much more lactose than this specification allows. The fourth layer is the description and the source: off-white to light tan powder, a slightly turbid solution, a declared bovine origin and a collection window. None of those is a test, but each one narrows the field before the laboratory work starts. ## The ratio that has to agree At the catalog limits, IgG is 20.0% of the powder and about 29% of the protein. That ratio is the identity signature. IgG is itself a protein, so the two figures cannot both be high without the ratio holding: a certificate that reports 70% protein and 2% IgG describes a milk protein, not colostrum. Mature bovine milk carries IgG at well under 1% of its protein, and a skim milk powder dried from it stays in that range. A blend of colostrum with skim milk powder moves the ratio down and the lactose up, and the two moves are visible on the same certificate. Read the ratio and the lactose together rather than trusting the protein figure on its own. The fat figure adds a third check. Whole milk powder holds roughly a quarter of its mass as fat and about 38% as lactose; skim milk powder trades the fat for lactose and lands near 50%. Colostrum powder at fat ≤5.0% and lactose ≤5.0% is nowhere near either, so a lot that reads like a milk powder is a milk powder however the label reads. Season and parity move the raw ratio, which is why the specification is written to a floor rather than to a typical value. A blend that meets the IgG floor while the protein sits at the top of the range is a legitimate lot with a high ratio, and it should not be rejected for being better than the minimum. ## What diffraction and infrared can add Spray-dried colostrum has no crystal lattice, so an X-ray diffraction scan returns one broad hump and no reflections. The flat pattern is a sign the process did what it should: sharp peaks would mean a crystalline phase, and here the usual candidate is crystalline lactose from a permeate or a whey-derived diluent rather than the protein. Infrared spectroscopy shows the protein backbone in the amide I and amide II regions and confirms that the powder is protein-rich rather than a carbohydrate or a salt. The carbohydrate region between roughly 1,000 and 1,100 cm⁻¹ is the useful part for adulteration: a strong band there points to lactose, maltodextrin or sucrose that the fat and lactose figures should already have flagged. The FTIR note and the XRD note describe what each technique can settle, and the methods index lists the rest. ## The routes that are actually used Adulteration routes for colostrum powder · the signal and the test | Route | What it changes | Test that catches it | Skim or whole milk powder added | Lactose climbs to 35–50%, IgG falls below 1% of protein | Lactose, IgG-to-protein ratio | Whey or permeate powder | Protein drops, lactose climbs, IgG is low | Lactose, protein, IgG | Maltodextrin or starch | Protein and IgG fall together; carbohydrate bands appear | Protein, IgG, FTIR, moisture | Non-protein nitrogen | Kjeldahl rises, IgG does not | Nitrogen against IgG, melamine screen | Colostrum of another species | Chromatogram and ring may be close; origin document is the tell | Species-specific antibody, origin record | IgG from a non-colostrum source | High IgG without the colostrum fat and lactose profile | Ratio, fat, lactose, process record | Lower grade re-labelled | Certificate and pack disagree on the IgG figure | Lot trace, retained sample Most of these routes are substitutions rather than safety events: a different milk protein or a carrier sold as the declared article. The nitrogen route is the safety one, and it is the reason a protein figure without an IgG figure is weak evidence for this material. The grade page explains why the IgG figure is a grade parameter as well as an identity check. ## What to write into the specification - The name, source and species: bovine colostrum powder, with the collection window stated. - IgG ≥20.0% by radial immunodiffusion, with the standard named and the sample preparation described. - Protein ≥70.0% by Kjeldahl with the factor 6.38 printed beside it. - Fat ≤5.0% and lactose ≤5.0%, which together carry much of the identity evidence. - Moisture, particle size, heavy metals and microbiology as release limits. - The milk allergen and bovine origin declarations, and the process temperature. Strip out the IgG method and the protein factor, and the document describes a protein powder with no evidence of its source. The product page carries the catalog ranges that a specification starts from, and the COA page shows how each figure reaches the certificate. ## Five questions for a supplier - Which IgG method and which reference standard were used, and can you send the standard curve for the lot? - Which nitrogen factor is printed beside the protein figure? - How soon after calving was the raw colostrum collected, and is the window stated on the specification? - What are the fat and lactose figures for the lot, and do they match the ratio on the certificate? - Which lot number links the retained sample to the pouch, the drum and the COA? These are ordinary questions for this material; an answer that cannot be given is a powder without the evidence behind it. The quality page sets out how the retained sample and the release file are kept. ### 01 What the COA for corn protein peptides reports URL: https://nutrition.rainwoodbio.com/products/protein-collagen/corn-protein-peptides/coa/ Reviewed: 2026-11-19 A corn peptide certificate is read on two axes at once: how much nitrogen the powder carries, and how much of that nitrogen sits in short chains. The first is a Kjeldahl result with a stated factor and basis; the second is an HPLC distribution with a stated window. The table below gives the catalog limits that both results are released against, and the batch COA is what shows a specific lot meeting them. In one lineProtein by Kjeldahl and peptide by HPLC answer different questions, so the certificate only means something when both methods, the moisture and the ash are reported beside the result. ## Reading the certificate line by line A certificate is a test report, not a badge. Each line should let a reviewer reconstruct the decision: the parameter, the method and the limit, in that order. When a line says only “conforms”, the reviewer has to take the conclusion on faith. Corn peptides make that demand harder because the material is defined by a fraction, not by a single molecule. One row reports nitrogen; another reports the peptides inside a size window. They can both be correct and still describe different things. Release parameters for corn protein peptides | Parameter | Method | Release limit | Appearance | Visual | Off-white to light tan powder | Identification | Protein and peptide profile | Conforms to the reference | Protein | Kjeldahl nitrogen | ≥80.0% | Peptide content | HPLC peptide distribution | ≥70.0% | Ash | Gravimetric | ≤5.0% | Moisture | Loss on drying | ≤7.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh ## Kjeldahl protein, the nitrogen factor and the as-is basis Kjeldahl digestion converts nitrogen to ammonia and measures it; the protein figure is that nitrogen multiplied by a factor. The factor is a convention, not a measurement, and 6.25 is only the most common convention. If the factor is missing, the percentage cannot be reproduced. The basis is a second convention. A result can be expressed on the powder as received or after subtracting moisture. The catalog says ≥80.0% and leaves the basis to the specification, so the specification has to choose one and keep it. An 80.0% as-is result at 6.0% moisture works out at about 85.1% dry basis: the same powder, two numbers. Nitrogen is also carried by free amino acids, ammonia and other small molecules that are not peptides. A high protein figure is therefore a statement about nitrogen, not about chain length. That is why the certificate needs the peptide line as well. ## Release limit versus batch result Two columns are often conflated: the limit the lot must meet, and the value the laboratory found. The first is the specification; the second is the evidence. A result column that repeats the limit has told the reader nothing about the lot. The limit and the measured value are different columns | Parameter | Release limit | Result column | Protein | ≥80.0% | A measured percentage, with the factor and the basis | Peptide content | ≥70.0% | A measured percentage, with the HPLC window and the chromatogram | Ash | ≤5.0% | A measured percentage | Moisture | ≤7.0% | A measured percentage | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot Microbiology is a count plus an absence statement. Heavy metals are a figure for each element, not a total; a summed figure can hide the one element that fails. The peptide line needs the chromatogram and the integration window as well as the percentage, or the number cannot be compared across suppliers. ## What moves between lots Three process steps move the numbers. Hydrolysis sets the peptide distribution: enzyme, dose, temperature, pH and time all shift how far the protein is broken down. Neutralisation sets the ash, because the salt formed from alkali and acid stays in the powder. Drying and milling set moisture and mesh. Appearance is a coarse check. The catalog range runs from off-white to light tan, and a shade within that range does not by itself indicate a problem. A clear darkening is worth a question about the drying hold or the decolourisation step, even when protein and peptide both pass. Across lots, direction matters more than a single result. Peptide falling, ash rising or moisture climbing with the season are trends worth investigating before a limit is breached. The lot code should connect the certificate, the pack and the retained sample. ## When an outside test earns its place An outside laboratory is useful when the supplier's data is not enough: a new source, a first shipment to a regulated market, a label claim that depends on the peptide figure, or a disputed lot. The panel should target the decision, not repeat the whole certificate. Ask for Kjeldahl with the factor, HPLC peptide distribution with the chromatogram, amino acid analysis, ash, moisture, ICP-MS and microbiology. Two additional checks answer source questions: the amino acid pattern (corn is low in lysine and tryptophan, soy is not) and a soy ELISA where a soy-free statement is needed. For corn, add GMO status and a mycotoxin panel as separate items. Retain the sample that was tested and record the lot. If a result is challenged, the referee needs the retained sample and the specification, and a test that can separate corn from another source rather than a second run of the same protein method. ## What to compare between suppliers Compare suppliers on the things that change the powder, not only on the headline protein figure: the corn fraction and hydrolysis route; the nitrogen factor and basis; the peptide window; ash and moisture; contaminants and microbiology; pack and lot code. Two certificates can agree on protein and still describe different materials. The catalog values are on the corn protein peptides product page. The identity page sets out the source tests, the grades page explains the peptide and mesh choices, the HPLC method note covers the separation, and the quality page describes release. ### 02 Corn protein peptide grades: peptide, mesh and granulation URL: https://nutrition.rainwoodbio.com/products/protein-collagen/corn-protein-peptides/grades/ Reviewed: 2026-11-19 Corn protein peptides are sold here as one catalog grade: an off-white to light tan powder at ≥80.0% protein by Kjeldahl and ≥70.0% peptide by HPLC, milled to 80 mesh. The grade questions that remain are the peptide window, the mesh and whether the powder is granulated. Those three change flow, dust, solubility and the label more than a different trade name does. In one lineA grade is the protein figure, the peptide figure, the mesh and the granulation, and each one changes how the powder runs in a capsule line or a blend. ## Why a corn peptide grade is a specification “Corn peptide” describes a family, not a single powder. Two suppliers can use the same name for hydrolysates made from different corn fractions, broken down to different degrees, milled to different meshes and dried on different lines. The protein figure can agree while the peptide distribution, the ash and the flow behave differently. That is why the grade has to be written as a set of numbers rather than accepted as a name. On this page the catalog grade is fixed at five lines: protein ≥80.0%, peptide ≥70.0%, ash ≤5.0%, moisture ≤7.0% and ≥95% through 80 mesh. A change to any one of them is a new specification, not a packing choice. The source matters inside the same species as well. Zein is the corn prolamine fraction, and a peptide made from zein is not automatically the same material as one made from whole corn gluten meal; the amino acid pattern and the solubility can differ. ## The catalog grade and the variants that need a new specification Corn protein peptide forms and what changes | Form | What changes | Why a buyer asks | 80 mesh powder | The catalog grade; no change | Capsules, tablets and powder blends | Granulated, on request | Larger particles, less dust, better flow | Blending and capsule feeding | Different mesh | Dissolution rate, mouthfeel, sieve result | A tablet or a suspension needs a different particle size | Higher peptide fraction | A different hydrolysis target and distribution | A label or a formula calls for more short-chain material | Dilution or carrier | Lower peptide per gram; the label ingredient changes | A lower potency is easier to weigh The third and fourth rows are often confused. A finer or coarser mesh is a milling change; the chemistry stays the same. A higher peptide figure is a hydrolysis change; the chemistry does not. A dilution adds a carrier and changes what the label declares. If a supplier offers “corn peptide 80%” and “corn peptide 90%”, ask whether the second figure is protein, peptide or a dilution. Granulation sits between the two. It changes the particle size and the flow without changing the protein or the peptide figure, but it does change the mesh result on the certificate and the way the powder wets out. A granulated grade is a different specification line even when the chemistry is identical. ## Flow, dust, colour and solubility An 80 mesh powder passes about 177 µm. At that size the powder flows reasonably in a capsule machine but dusts when it is poured, and dust is material that can segregate in a blend or settle on the equipment. Granulation binds the fine particles into larger ones, which reduces dust and improves flow; the trade-off is a slower wetting step and a different particle-size result. The catalog appearance is off-white to light tan. The colour moves with the corn fraction, the decolourisation step and the drying temperature, and a tan shift inside the range is not a grade failure. The odour is mildly cereal. Both matter in a capsule or a plain powder blend, where no flavour system covers them. Solubility is a grade question as well as a process question. The powder is soluble in water and gives a clear to slightly turbid solution. A cloudy solution can come from undissolved fine particles, from a less hydrolysed fraction or from a high mineral load, and the cause should be identified before the grade is blamed. Test the solubility in the matrix and at the concentration the formula will use, not only in water at 1%. Hygroscopicity is the handling property that decides the pack. The 80 mesh powder has more surface area than a granulated grade and picks up moisture faster when a pouch is left open. A granulated grade is still hygroscopic; it is not a moisture barrier. ## What the grade means in a capsule, tablet or blend A capsule takes the 80 mesh powder directly. The fill weight is set by the bulk density and the target peptide amount, and the capsule shell needs a dry room because the powder pulls moisture from the air. A granulated grade can improve flow on a high-speed capsule machine, but it changes the fill weight for the same volume and the label dose has to be recalculated. A tablet needs flow and compressibility. A fine, hygroscopic peptide powder can bridge in the hopper or cap during compression, and granulation is the usual answer; it is a formulation decision, not a cosmetic one. A powder blend takes the grade that matches the other ingredients in particle size, so that the blend does not segregate. A stick pack takes the grade that disperses in the stated volume, and the cereal odour has to be acceptable in the finished drink. ## What to write into the specification - “Corn protein peptides, source Zea mays; state the corn fraction and the hydrolysis route.” - “Protein ≥80.0% by Kjeldahl; state the nitrogen factor and whether the figure is as-is or dry basis.” - “Peptide content ≥70.0% by HPLC; state the molecular-weight window and the integration method.” - “Ash ≤5.0%; moisture ≤7.0%; appearance off-white to light tan.” - “Particle size ≥95% through 80 mesh; granulated on request as a separate line.” - “Heavy metals, microbiology, allergen statement and GMO statement as agreed for the destination.” - “Pack, storage condition and retest period for the pack being bought.” A specification that lists only “corn peptide 80%” has left the peptide, the mesh and the source open. The product hub carries the catalog values; the COA page shows how each line is reported; the corn versus soy comparison covers the source question; the HPLC method note explains the peptide distribution; the quality page describes the release file. ## When a different grade is the wrong purchase A dilution is the wrong purchase when the label declares a peptide amount per serving and the finished weight is fixed; the extra carrier has to be declared and the dose changes. A higher protein figure is the wrong upgrade when the peptide figure falls, because the label is paying for nitrogen that is not in short chains. A granulated grade is the wrong choice when the process needs a fast-dissolving fine powder and has no equipment to wet the granules. The clearest wrong purchase is a different source sold under the same name. Soy peptides, wheat hydrolysates and corn peptides are separate materials with separate allergen statements, and no mesh or peptide figure turns one into the other. ### 02.1 Corn peptides vs soy peptides: source, allergen and label URL: https://nutrition.rainwoodbio.com/products/protein-collagen/corn-protein-peptides/grades/corn-peptides-vs-soy-peptides/ Reviewed: 2026-11-19 Corn peptides and soy peptides are both protein hydrolysates, but they come from different sources and carry different label obligations. Soy is a major allergen in the EU and the US, so a soy peptide must be declared; corn is not on either major-allergen list, but its GMO status and its amino acid pattern still have to be documented. The two are not interchangeable in a formula or on a label. In one lineCorn and soy peptides are both hydrolysates, but they differ in amino acid profile, allergen status and the name that goes on the label. ## Two sources, two hydrolysates Corn peptides are made by hydrolysing corn protein, usually from corn gluten meal, a by-product of wet milling; zein, the prolamine fraction, is another starting point. Soy peptides are made by hydrolysing soy protein, often from soy protein isolate or soy meal. Both routes use food-grade enzymes, then inactivate the enzyme, clarify, concentrate and dry. The result is a mixture of peptides, free amino acids, ash and moisture, not a pure peptide. Three labels are easy to confuse. Soy protein isolate is the intact protein, specified at ≥90% on a dry basis and dispersible rather than soluble. Soy peptides are the hydrolysate and are more soluble than the isolate. Corn peptides are a hydrolysate from corn. A formula that switches from the isolate to the peptide has changed the ingredient, the protein figure and the allergen statement at the same time. Pea protein isolate is the third reference point: another plant protein with its own allergen statement, and a common partner in a blend that needs a fuller amino acid profile than corn alone provides. ## Corn peptides and soy peptides side by side Two plant peptides compared | Property | Corn peptides | Soy peptides | Source | Zea mays, often corn gluten meal or zein | Glycine max, soy protein or meal | Protein figure | ≥80.0% by Kjeldahl in this catalog | Supplier-specific; confirm the method and basis | Peptide figure | ≥70.0% by HPLC in this catalog | Supplier-specific; confirm the window | Amino acid profile | Low in lysine and tryptophan | Higher in lysine; low in methionine | Allergen status | Not on the EU Annex II or US major-allergen list | A major allergen in the EU and the US | Colour and odour | Off-white to light tan; mild cereal | Cream to beige; beany | Solubility | Clear to slightly turbid solution | Soluble as a hydrolysate; the isolate is dispersible | Label name | Corn protein peptides or hydrolysed corn protein | Soy protein hydrolysate or hydrolysed soy protein | Regulatory question | History of use, GMO status, source | Allergen declaration, GMO status, source The protein row is not a like-for-like comparison. Corn peptides are specified at ≥80.0%, while soy protein isolate is specified at ≥90% on a dry basis, and a soy peptide may sit at a different figure again. Compare the two products at the same basis and the same peptide window, or the comparison is only about the source. ## Protein, peptide and the amino acid gap Corn protein is limiting in lysine and tryptophan, so a corn peptide used alone does not deliver a complete amino acid profile for a protein claim. Soy protein is higher in lysine and limiting in methionine, and a corn-soy or corn-pea blend can close both gaps. That is a formulation decision, and the amino acid profile should be on file for each component before the blend is designed. Protein and peptide are separate figures for both materials. A hydrolysate can report a high protein figure because it is rich in nitrogen, while the peptide fraction in the chosen molecular-weight window is lower. Ask both suppliers for the protein method and factor, the peptide method and window, and the amino acid profile. A comparison built on the protein figure alone will miss the difference that matters in a capsule or a drink. ## The allergen question In the EU, Regulation (EU) No 1169/2011 Annex II lists soy as an allergen; corn is not on that list. In the US, the Food Allergen Labeling and Consumer Protection Act lists soy as a major food allergen; corn is not one. A soy peptide therefore needs an allergen declaration, a control plan and a cleaning validation between runs. A corn peptide does not carry that specific obligation, but the source still has to be named in the ingredient list, and cross-contact with soy or wheat in a shared facility is a separate control. “Soy-free” and “gluten-free” are claims, not synonyms for “corn-derived”. Each needs a supplier statement, a cross-contact assessment and, where the market requires it, a test result for the lot. The current destination text and the brand's reviewer decide the wording; the certificate does not approve a claim. The methods library describes the analytical options, including the ELISA and PCR formats that a source or allergen question may need. ## Colour, odour and solubility in the formula Corn peptides are off-white to light tan with a mild cereal odour. Soy peptides are cream to beige with a beany note. Both can turn bitter as the degree of hydrolysis rises, because short hydrophobic peptides are part of what makes a hydrolysate soluble. The taste is a function of the hydrolysis route, not only the source, so a sample is the only reliable guide for a flavoured drink. Solubility separates the categories in practice. Corn peptides give a clear to slightly turbid solution, which suits a stick pack or a clear fortified water. Soy peptides are soluble as a hydrolysate, but soy protein isolate is only dispersible and gives an opaque suspension. A formulator who needs a clear drink should compare the peptide with the peptide, not the peptide with the isolate. In a capsule or a tablet, colour and odour matter more than clarity, because there is no water and no flavour system to hide them. ## When each one fits, and what changes on a switch Choose corn peptides when the label needs to avoid the soy allergen, when a cereal note is acceptable, and when the amino acid gap is covered by another protein in the blend. Choose soy peptides when the formula needs soy's higher lysine contribution and the allergen declaration is acceptable. Neither choice is a substitute for reading the certificate: the source, the protein method and the peptide window still decide what the powder is. A switch is a new specification, not a substitution at the weigh-up. It changes the allergen statement, the label name, the amino acid profile, the taste and often the stability of the blend. Run the new material through the same identity, stability and label review as a new supplier, and keep the old and new certificates apart. The corn protein peptides hub carries the catalog values; the identity page covers the source tests; the grades page covers mesh and granulation; the quality page describes the release file. ### 03 Corn protein peptides: moisture, caking and the pack URL: https://nutrition.rainwoodbio.com/products/protein-collagen/corn-protein-peptides/stability/ Reviewed: 2026-11-19 Corn protein peptides pull water from the air, and that single property drives most of the storage risk: caking, a falling as-is protein figure, colour change and microbial growth. A sealed foil pouch or a lined drum, a dry store and a short opening routine are the practical controls. In water, the powder needs a validated hold because heat, pH and oxygen act together. In one lineThe powder is hygroscopic and mildly cereal-scented; the seal, the desiccant decision and the storage temperature decide whether it stays free-flowing. ## The powder: moisture, caking and colour The release limit for moisture is ≤7.0%. That limit is measured at release and says nothing about the months that follow. Once the pouch is open, the powder moves toward the humidity of the room; the surface absorbs water first, the particles stick, and the powder can cake before the analytical result moves. An 80 mesh powder exposes a lot of surface, so it takes up moisture faster than a granulated grade. Granulation only slows the rate; it does not make the material hydrophobic. Keep the original pack, close the liner, and note the opening date. Temperature belongs in the same paragraph. A warm room speeds the movement of moisture and the browning reactions, while a cold room can leave condensation on a pack brought back into the warm. Let a cold pack reach room temperature before opening. ## The solution: clear to slightly turbid, and time-limited The powder dissolves in water to a clear to slightly turbid solution. Once dissolved, it is exposed to heat, pH, oxygen and microbes at the same time; a result on the dry powder cannot predict the hold time of the drink. A hot fill or a pasteurisation step is a heat load the powder never sees. A stick pack avoids that load because the consumer adds water at use. If a liquid is required, fix the pH, reduce dissolved oxygen, keep the solution dark and validate the hold before the filler is set. Turbidity is not automatically a failure. Fine particles, a less hydrolysed fraction and a mineral load can all cloud a solution. Find the cause before changing the specification. ## Storage conditions that move the powder How storage conditions affect corn protein peptides | Factor | Effect on the powder | Control | Moisture | Caking, microbial growth, lower as-is protein | Sealed pouch or lined drum; desiccant where needed | Heat | Browning and odour change, faster moisture movement | Cool, dry store | Oxygen | Oxidation of residual lipid; colour and odour change | Low headspace; sealed pack; nitrogen where specified | Light | Colour change at the powder surface | Opaque or foil pack; dark store | pH | Solution only; changes solubility and colour | Validate the matrix pH; buffer if needed | Reducing sugars | Maillard browning with peptides and heat | Specify the carbohydrate profile; control heat and moisture | Metal ions | Colour and complexation in solution | Avoid iron and copper contact No factor acts alone. A warm, humid store is worse than the sum of two separate effects, and a clear bottle of solution on a bench adds light, oxygen and time. The practical question is not whether the ingredient is stable in the abstract, but whether this pack at this condition holds the protein, peptide and appearance for the claimed period. ## A stability protocol for the ingredient The protocol names the pack, the condition, the time points and the tests. Long-term storage is held at 25 °C and 60% relative humidity; the intermediate condition is 30 °C and 65% relative humidity; the accelerated condition is 40 °C and 75% relative humidity. Add a light-exposure arm for the colour change that a dark chamber will not show. Analyse protein with the factor, peptide with the same window as release, plus moisture, ash, appearance, odour, solubility and microbiology. For a stick pack or a drink, repeat in the matrix at the process pH and heat load. Show the individual results, not a pass line, and identify the pack and the lot family. Buy data for the pack you will use. A pouch and a drum differ in headspace, opening history and surface area, so a summary for one does not answer for the other. ## When the powder becomes a formula Capsules and tablets keep water activity low, yet the shell and the excipients may still pass moisture to a hygroscopic fill. Check moisture and fill appearance at release and after storage. Powder blends are more exposed. A reducing sugar in the same blend can brown with the peptide under heat and moisture, even at a water activity that looks acceptable. A stick pack adds the seal to the list: a pinhole fails the pack, so inspect the strip as well as the powder. A drink adds pH, heat and oxygen. An overage is a label and stability decision; it does not fix a pack that leaks moisture. ## How the shelf life is set No single shelf-life figure is published for the ingredient. The retest period is assigned per pack and supported by the file for that pack; a number without those conditions is a marketing statement, not a shelf life. At the end of the retest period, re-test the retained sample before extending. Do not extend on assumption or move a bulk figure to a repack. Pack details sit on the product hub; the release tests are on the COA page; pack and lead time are on the MOQ page; the microbiology method note explains the count; the quality page covers release. ### 04 Corn protein peptides: MOQ, packs and quotation URL: https://nutrition.rainwoodbio.com/products/protein-collagen/corn-protein-peptides/moq/ Reviewed: 2026-11-19 The order starts at 1 kg in a foil pouch, and the production pack is a 25 kg fiber drum. Standard powder ships in 1–7 days from confirmation. A usable quotation names the peptide specification, the mesh, the pack, the destination and the documents, because those five decide what is actually sent. In one lineThe 1 kg foil pouch is the order unit: one lot code covers the trial, the retained sample and an outside test. ## Why the smallest pack is one kilogram One kilogram is enough to run a trial, keep a retained sample and send a portion to an outside laboratory, without opening a production drum. It also ships as a parcel, which helps when the trial is waiting on material. Smaller quantities come from splitting a larger lot. That is a repack: it adds handling, breaks the original pack identity and makes the lot chain harder to follow. The chemistry does not change, but the traceability does. A buyer who needs 100 g for a bench test is buying a repack, not a catalog unit, and the quotation should say so. The 25 kg drum lowers the handling per kilogram and ties up more inventory for longer. The minimum is about the pack, not about pushing volume. ## Packs and formats Corn protein peptide packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Particle profile changes; separate specification The catalog powder is milled to 80 mesh (≥95% through). Granulation is a separate specification: it changes the particle-size line and the flow, and it should be quoted as a change, not slipped into the same pack code. The foil pouch is the moisture barrier for a 1 kg order; the drum relies on its inner liner, so the liner has to be closed after sampling. Neither pack makes the powder non-hygroscopic. ## Lead time and dispatch Standard powder is quoted at 1–7 days from confirmation. Picking, paperwork and dispatch sit inside that window; transit, customs and the customer's own release do not. A granulated or otherwise custom pack needs its own date. Ask for the dispatch date. The Incoterm decides who books freight and who clears entry, and the documents should be on the same lot as the powder. ## What a quotation needs Six details make a quotation comparable: - The material and its source. Corn protein peptides, with the corn fraction and hydrolysis route named. - The specification. Nitrogen factor and basis, peptide window, ash, moisture and mesh. - The pack. 1 kg pouch, 25 kg drum or a granulated variant. - The destination and Incoterm. The delivery point and the trade term. - The document set. COA, specification, SDS, allergen statement and GMO statement. - The intended use and market. Supplement, food or another use, and where it will be sold. Without the source, the peptide figure and the market, a quotation is only a weight and a pack. Commercial terms are stated on the quotation, not on this page. ## Qualifying a sample The 1 kg pouch is the qualification unit. Test identity, protein, peptide, moisture and microbiology, then keep part of the same pack as the retained sample. The lot code should appear on the sample, the COA and the quotation. A sample with no lot code cannot support a specification decision, however good the result looks. A bench-scale split is a repack, not the catalog pack. Ask for it explicitly and record it. The trial lot and the production drum are not guaranteed to be the same lot. ## Terms to agree before ordering The quotation carries the commercial terms; the quality agreement carries the rest. Write down the revision of the specification, one COA per lot, the sample kept for reference, how long the material can be held, and how a change to the source or process is approved. Those five lines prevent most disputes. If a lot fails, use the retained sample and a joint re-test. A photograph is not evidence. Agree the referee laboratory and who pays for it before the dispute, not after. The product hub holds the catalog data; the COA page lists the release tests; the compliance page covers market files; the MOQ glossary entry defines the term; the quality page describes release. ### 05 The regulatory file for corn protein peptides URL: https://nutrition.rainwoodbio.com/products/protein-collagen/corn-protein-peptides/compliance/ Reviewed: 2026-11-19 Corn peptides sit at the intersection of three questions: whether the hydrolysate has a route in the destination, how the corn source is documented, and what the label may say about the protein. The buyer's regulatory team answers the route question; the supplier's file supplies the source, specification and lot evidence that the answer depends on. In one lineThe buyer's regulatory team confirms the route; the supplier's file has to make that review possible with the source, the specification and the lot data. ## What the file has to answer The file has four jobs. It identifies the material and the specification revision; it ties the release to a lot and a certificate; it sets out the route, limits and label for the destination; and it records what happens when the source, process or pack changes. The certificate, the technical data sheet and the safety data sheet each answer part of that, and none answers the route. Corn adds two documents that a generic protein file may not have. One is the GMO status of the corn and the identity-preserved chain. The other is the allergen position: corn is not on the EU Annex II or US major-allergen lists, but the source must be declared and soy or wheat cross-contact is a separate control. ## European Union The first EU question is novel food. Regulation (EU) 2015/2283 covers food that was not used for human consumption to a significant degree in the Union before 15 May 1997. Whether a particular corn hydrolysate falls inside that definition depends on its history, so the buyer's team checks the novel food catalogue and the evidence for the exact material. No status is asserted here. The rest of the file draws on Regulation (EU) No 1169/2011 (food information), Regulation (EC) No 1924/2006 (claims), Commission Regulation (EU) 2023/915 (contaminants) and Regulation (EC) No 1829/2003 (GM food). Soy appears in Annex II of the food-information regulation; corn does not. Great Britain has its own register and rules, and Northern Ireland follows the EU list. Verify the current text; these instruments are amended. ## United States In the US, start with the intended use and the basis for the ingredient. A dietary supplement ingredient is assessed under the Federal Food, Drug, and Cosmetic Act as amended by DSHEA. If it is a new dietary ingredient, the 21 CFR 190.6 notification is due at least 75 days before marketing; the buyer's team decides whether that applies. 21 CFR 111 covers cGMP and 21 CFR 101 covers labelling. Soy is a major food allergen under FALCPA; corn is not. A structure/function claim needs substantiation and the applicable notification, and a disease claim is not an option for a supplement. The claim review is separate from the certificate. ## Contaminants and limits The contaminant calculation belongs to the finished product, not to the drum. The destination text and the daily dose set the limit; the table below is the list of questions to ask, not a set of universal numbers. Contaminant questions for a corn peptide file | Parameter | Why it belongs in a corn file | What the file should show | Lead (Pb) | A general supplement contaminant | Lot result, method, limit and dose calculation | Cadmium (Cd) | A general supplement contaminant | Lot result and any category exception | Mercury (Hg) | A general supplement contaminant | Lot result and method | Arsenic (As) | A market or customer limit | The agreed limit and method | Mycotoxins | Corn can carry aflatoxin, fumonisin and deoxynivalenol | A risk-based panel agreed for lot and destination | Microbiology | Powder handling and water activity | Counts and absence tests Mycotoxins are the corn-specific item that a generic certificate may not cover. The catalog specification here does not list them, so the buyer should ask whether the source monitors them and whether the lot can be tested against the destination limits. Pesticides and residual solvents are separately agreed. ## Claims and the label No disease claim is made for this ingredient. In the EU, a health claim must appear in Regulation (EU) No 432/2012, and a protein nutrition claim is calculated on the finished product, not on the raw powder. “Peptide” describes a fraction; it is not an authorised health claim, and the figure behind it must be on the specification if the label uses the word. In the US, a structure/function claim needs substantiation and the notification, and the ingredient is named in the Supplement Facts panel. “Soy-free” and “gluten-free” need a supplier statement, a cross-contact assessment and, where required, a lot test. The brand's reviewer decides the wording; the certificate does not. ## The document set - Specification with the revision number, the corn source, the nitrogen factor, the peptide window and the mesh. - Certificate of analysis for the lot, with methods, limits and measured results. - Technical data sheet and safety data sheet. - Allergen statement covering the corn source and the soy and wheat cross-contact controls. - GMO statement and, where the market requires it, the identity-preserved or non-GMO certificate. - Origin record, contaminant results, microbiology and any customer-specific declaration. - Nutritional data and the supporting documents for any claim the brand intends to make. ## Checklist before the first order - The specification version, the corn source and the hydrolysis route are named. - The novel-food or dietary-ingredient route is confirmed by the buyer's regulatory team for the destination. - The GMO status and the allergen statement are on file and match the lot. - The mycotoxin and heavy-metal results are recalculated for the finished-product dose. - The label, the nutrition panel and the claim wording have been reviewed for the market. - Change control covers the source, the process and the pack, and the quotation, specification and certificate refer to the same version. Catalog values are on the product hub; the lot certificate is explained on the COA page; the source evidence is on the identity page; the framework references are in the EU and US regulatory notes; the release file is described on the quality page. ### 06 How to prove a corn protein peptide lot is corn URL: https://nutrition.rainwoodbio.com/products/protein-collagen/corn-protein-peptides/identity/ Reviewed: 2026-11-19 A corn protein peptide lot is the named material when the source, the protein figure, the peptide distribution and the amino acid pattern agree. The protein figure alone does not prove the source and does not prove the peptide fraction; a soy or wheat hydrolysate can be blended to the same nitrogen number. The certificate, the chromatogram and the amino acid data have to be read together. In one lineIdentity here is source plus fraction: the nitrogen figure, the peptide distribution, the amino acid pattern and the ash have to agree before the word corn is earned. ## The identity layers A certificate can name the right material and still fail to prove it. The layers below are separate questions, and each needs its own evidence. A supplier who answers only the first has described the paperwork, not the powder. Five layers of corn protein peptide identity | Layer | Question | Test | What it proves | Document | Is the source named? | Name, source, hydrolysis route | Paperwork only | Nitrogen | Is it protein-rich? | Kjeldahl with the factor stated | Total nitrogen, not the peptide fraction | Peptide distribution | Is the fraction in the window? | HPLC with the chromatogram | The short-chain fraction | Amino acid pattern | Is the source corn? | Amino acid analysis | A source fingerprint | Mass balance | Is it diluted? | Protein, peptide, ash and moisture together | Consistency of the numbers ## The protein-to-peptide ratio and the nitrogen factor Protein is calculated from nitrogen: the Kjeldahl result multiplied by an agreed factor, 6.25 in the usual case. The factor is an assumption, and it belongs on the certificate. Peptide content is measured by HPLC and counts the fraction that falls inside the molecular-weight window the method defines. The two figures describe different parts of the same powder, and peptide should not exceed protein: a peptide result above the protein result means the methods, the bases or the calculations do not line up. The gap between the two is informative. A powder at 85% protein and 72% peptide has a 13-point gap that can hold free amino acids, larger peptides and non-protein nitrogen. A powder at 85% protein and 45% peptide is not the same material, even though the protein line looks stronger. The gap is the first place to look when a lot is suspected of being under-hydrolysed or extended with a nitrogen source. Ash and moisture close the mass balance. At the catalog limits, ash ≤5.0% and moisture ≤7.0% leave room for the protein, the peptide and a small amount of fat and carbohydrate. A high ash points to the neutralisation salt; a high moisture dilutes the as-is protein and feeds caking. Neither is an identity test on its own, but a lot that reports 80% protein with 12% ash and 10% moisture has an arithmetic problem. The amino acid ratio is the source check. Corn protein is low in lysine and tryptophan relative to soy, and soy is low in methionine relative to corn. A hydrolysate that reports soy-like lysine under a corn label needs an explanation. Tryptophan needs its own hydrolysis method because acid hydrolysis destroys it; a certificate that reports tryptophan from a standard acid hydrolysis has reported a number it cannot defend. ## X-ray diffraction: what it can and cannot show Corn protein peptides are amorphous after spray drying, and X-ray diffraction is not a routine identity test for them. The pattern is broad, and a “conforms” statement against an amorphous reference adds little. XRD becomes useful when the question is whether the powder contains a crystalline carrier or a salt from neutralisation; a sharp pattern is a signal to ask what else is in the blend. If a supplier offers XRD as identity evidence, ask for the pattern, the reference and the detection limit. It does not measure the peptide fraction and it does not prove the corn source. It is a supporting solid-state check, not a substitute for the nitrogen, peptide and amino acid data. ## What adulteration looks like Common corn peptide substitutions and the signals | Adulterant | What it does | Signal | Test | Soy peptides | Raises protein and lysine | Lysine high for corn; soy protein detected | Amino acid profile, soy ELISA | Wheat or gluten hydrolysate | Raises protein with a non-corn source | Glutamic acid and proline pattern; gluten detected | Amino acid profile, gluten ELISA | Free amino acids | Raises the nitrogen figure | Peptide low against protein | HPLC distribution, amino acid analysis | Maltodextrin or dextrose | Dilutes the powder | Protein and peptide low; sugar present | Mass balance, sugar profile | Non-protein nitrogen | Raises Kjeldahl without peptide | Protein high, peptide low, ammonia present | Ammonia or urea test, peptide HPLC | Moisture | Lowers the as-is protein | Moisture high; dry-basis figure normal | Loss on drying The simplest substitutions are the ones that move the protein figure, because the protein figure is the number most buyers check first. The peptide figure, the amino acid pattern and the ash are the checks that make the substitution visible. Colour is the weakest signal: off-white to light tan covers a wide range of powders, including blends. ## How to write the identity into the specification - “Corn protein peptides, source Zea mays; state the corn fraction and the hydrolysis route.” - “Protein ≥80.0% by Kjeldahl; state the nitrogen factor and whether the figure is as-is or dry basis.” - “Peptide content ≥70.0% by HPLC; state the molecular-weight window and the integration method.” - “Amino acid profile on file, with lysine and tryptophan reported by a validated method.” - “Ash ≤5.0%; moisture ≤7.0%; appearance off-white to light tan; ≥95% through 80 mesh.” - “No soy or wheat protein above the agreed limit; allergen and GMO statements for the lot.” A specification built this way gives the laboratory something to test and the buyer something to compare. A single line that says “corn peptide 80%” gives neither. The product hub carries the catalog values; the COA page shows where each figure sits on the certificate; the grades page covers the peptide and mesh choices; the corn versus soy comparison covers the source question; the HPLC method note explains the separation; the quality page describes the release file. ## Five questions for the supplier - Which corn fraction and hydrolysis route produced this lot, and is the source named on the certificate? - What are the protein factor, the assay basis and the peptide molecular-weight window? - Can you provide the peptide chromatogram and the amino acid profile, not only the protein percentage? - What are the ash and moisture results, and how do they close the mass balance? - If the lot is disputed, will you accept a joint re-test on the retained sample? Five direct answers amount to an identity file. A single protein percentage does not. ### 01 What the COA for oyster protein peptides actually contains URL: https://nutrition.rainwoodbio.com/products/protein-collagen/oyster-protein-peptides/coa/ Reviewed: 2026-11-19 An oyster protein peptide certificate reports protein by Kjeldahl, peptide content by HPLC, ash, moisture, the heavy-metal panel, microbiology and particle size. Each line needs its method and its release limit, and the measured result belongs in its own column. The limits in the first table are the catalog specification; the batch COA is the document that confirms a particular pack. In one lineThe protein figure, the peptide figure and the ash figure only mean something together: each needs its method, its basis and a separate batch result on the certificate. ## The certificate as a test report A certificate is auditable when every row answers three questions: what was measured, by which method, and against which limit. A row that says only “conforms” asks the reader to accept a conclusion without the evidence. For a hydrolysate, the protein figure and the peptide figure describe different parts of the same mixture. The identification row is comparative: “protein and peptide profile conform” means something only when the certificate names the reference and shows the chromatogram. The protein and peptide rows are separate measurements, not two names for one number. Identity, protein, peptide and contaminants · oyster protein peptides | Parameter | Method | Release limit | Appearance | Visual | Off-white to light tan powder | Identification | Protein and peptide profile | Conforms to the reference | Protein | Kjeldahl, factor stated | ≥80.0% | Peptide content | HPLC distribution | ≥70.0% | Moisture | Gravimetric | ≤7.0% | Ash | Gravimetric, muffle furnace | ≤10.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh ## Protein basis, peptide cut-off and the arithmetic between them Protein by Kjeldahl is nitrogen multiplied by a factor. The factor and the basis have to be printed on the certificate, because a protein percentage without them is not comparable with another supplier's. A lot at 80.0% as-is with 6.0% moisture calculates to 85.1% on the dry basis (80.0 ÷ 0.94), so the same powder can carry two different numbers when the basis is named. The peptide figure is a distribution, not a single substance. HPLC separates the hydrolysate into size classes, and the “≥70%” line depends on the cut-off and standard used. A percentage without the cut-off and method is not comparable. Ask for the distribution, not only the total. On the same sample and basis, 70% peptide against 80% protein means 87.5% of the protein is in the peptide fraction (70 ÷ 80). The remainder is larger protein, free amino acids and non-protein nitrogen. The arithmetic is a consistency check: it shows whether the two figures could describe the same powder. Ash is the third number in this group. The ≤10.0% limit is high for a protein powder because oyster tissue carries minerals and shell contact adds calcium carbonate. An ash result that climbs while protein and peptide hold steady points to the raw material or the separation step. ## Release limit versus batch result The release limit is the acceptance boundary; the batch result is what the laboratory measured. Both belong on the page, in separate columns, with the method beside them. A result column filled with the specification range is a copy of the gate, not a result. What the result column should contain | Parameter | Release limit | Result column | Protein | ≥80.0%, basis stated | A measured percentage, with the nitrogen factor and the basis | Peptide content | ≥70.0%, cut-off stated | A measured percentage, with the HPLC cut-off and the distribution | Moisture | ≤7.0% | A measured percentage | Ash | ≤10.0% | A measured percentage | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot Two lines deserve a closer look. Heavy metals must be reported per element, not as a single total, because arsenic is the element that behaves differently in a marine material. A total-arsenic result and an inorganic-arsenic result answer different questions, and the certificate should say which one it measured. Microbiology needs a count plus an absence statement; “passes” alone hides the number. ## What moves between batches The raw material comes first. Oyster species, harvest area, season and meat versus whole soft tissue all move the protein, the ash, the colour and the odour. Shell contact is the specific risk: a little shell raises the ash and calcium without changing the protein by much. The source record and the ash trend together tell the story. The hydrolysis moves the peptide curve. Enzyme, time, temperature, pH and inactivation set the degree of hydrolysis, which changes the peptide-to-protein ratio, the bitterness, the colour after drying and the hygroscopicity. The same peptide number from a different hydrolysis route is not necessarily the same material. Drying and milling move the physical lines. Spray drying sets the bulk density and the colour; the mill and the sieve set the 80 mesh result. A granulated lot is a different particle specification, not a cosmetic variant. Colour and odour are the least quantitative lines and often the first to reveal a change in the raw material or the drying step. A trend across lots says more than one result near an edge. The lot code on the certificate should match the pouch, the drum and the retained sample. ## When to order an outside test Order an independent test for a new source, a first regulated-market shipment, a source claim the certificate does not prove, or a disputed result. The useful panel is not a full repeat of the certificate. It is Kjeldahl protein with the factor, HPLC peptide distribution, an amino acid profile, ash, moisture, ICP-MS for the heavy-metal panel, microbiology, and a species check on the raw material. Add arsenic speciation when the destination market limits inorganic arsenic. Add X-ray diffraction when shell contamination is suspected, because calcite gives a sharp pattern that an amorphous peptide does not. Ask the laboratory to report its detection limit for each screen. A “not detected” line without a limit is evidence about the method's sensitivity, not about the sample. Chain of custody matters. The sample tested should be the sample retained, and the report should identify the lot. When a result is contested, give the referee the retained sample, the certificate and the specification, and ask for tests that separate source and peptide fraction, not a repeat assay. ## What to compare between suppliers Put six lines side by side: source and species; protein method, factor and basis; peptide method and cut-off; ash; heavy metals with the arsenic basis; pack size and lot code. Two quotations that agree on protein but differ on factor or peptide cut-off are not describing the same powder. The second layer is traceability. The certificate should say who made the lot, the raw material and hydrolysis route, and the drying and milling steps. The catalog specification sits on the oyster protein peptides product page. The tests that separate oyster from fish are on the identity page; the market conditions are on the compliance page; the test methods are indexed at resources/methods; the release workflow is on the quality page. ### 02 Oyster peptide grades: protein, peptide size and ash URL: https://nutrition.rainwoodbio.com/products/protein-collagen/oyster-protein-peptides/grades/ Reviewed: 2026-11-19 Oyster protein peptides are sold against a specification, not against an official grade ladder. The commercial choices are the protein target, the peptide fraction and the degree of hydrolysis behind it, the ash limit, the particle size and the source. The catalog grade is ≥80.0% protein, ≥70.0% peptide, ≤10.0% ash and ≥95% through 80 mesh. A change in any of those lines changes the powder in the drum even when the ingredient name stays the same. In one lineThere is no official grade ladder for oyster peptides; the commercial grade is the protein and peptide target, the ash limit, the particle size and the degree of hydrolysis behind them. ## Why a hydrolysate is graded by process, not by rank “Food grade” and “supplement grade” describe the quality system, the documentation and the intended use. They do not fix the protein content, the peptide size or the ash. Two powders that both carry a food-grade certificate can sit ten points apart on protein and still be sold under the same generic name. The buyer has to read the specification, not the grade word. The composition is created upstream. Enzyme choice, hydrolysis time, temperature and pH set the peptide curve. Filtration and washing set the ash. Drying sets the colour, the bulk density and the odour, and milling sets the mesh. Those steps are the grade levers, and each one carries a yield penalty. A higher protein target usually means more separation and less yield; a tighter ash target means more washing and more waste water. The grade is a process decision before it is a commercial one. Oyster is also a source with its own variation. Species, harvest area, season and the tissue fraction change the amino acid profile and the mineral load. A plant that runs a mixed catch will produce a specification that moves with the mix, so the source record belongs beside the grade number. ## The levers that define a grade Specification levers for oyster protein peptides | Lever | Catalog position | What a tighter target changes | Protein | ≥80.0% by Kjeldahl | More concentration and yield loss; the ash becomes harder to hold | Peptide fraction | ≥70.0% by HPLC | Longer or more controlled hydrolysis; taste, colour and hygroscopicity move | Degree of hydrolysis | Set by the peptide target | Smaller peptides raise solubility and osmolality; the odour can become more noticeable | Ash | ≤10.0% | Tighter ash needs better meat–shell separation and washing; colour and mineral load fall | Particle size | ≥95% through 80 mesh | Granulation improves flow and reduces dust; it is a different particle specification | Source | Oyster; species and tissue declared | Species and tissue change the amino acid profile, the allergen record and the label The table is not a menu of stocked grades. It is the set of decisions that has to be written into the specification before a lot can be quoted. “Oyster peptides, 80% protein” leaves the peptide method, the ash and the mesh open, and those three lines decide whether the powder works in a capsule or only in a blend. ## Colour, odour, solubility and flow The catalog appearance is off-white to light tan. The colour moves with the raw material and the drying step: a hotter dryer and a longer hold push the powder toward tan through browning reactions, and shell contact adds a grey or mineral cast. The odour is marine and belongs to the material. It comes from the raw tissue, from residual lipid and from the volatile compounds released during hydrolysis. A higher degree of hydrolysis can make the odour more noticeable rather than less, because more small peptides and free amino acids are exposed. Solubility is good: the powder dissolves in water to a clear to slightly turbid solution. Turbidity rises with the larger peptide fraction, with the ash and with the concentration. The standard powder is fine: ≥95% through 80 mesh. It disperses quickly, but it is hygroscopic and it produces dust when poured. Granulation improves flow and reduces dust, and it changes the particle-size line and the bulk density. A granulated grade is a different purchase, not a packing preference. ## What the grade does in the finished product In a capsule, bulk density and fill weight set the dose per capsule, and the hygroscopic powder competes with the shell for moisture. A fine 80 mesh powder can bridge in the hopper, and a granulated lot can run faster on the same machine. The capsule shell and the fill should be checked together in a short stability trial, because a powder that picks up water can make the shell brittle or sticky. In a tablet, the same fine powder may need granulation before compression. The ash and the mineral load can affect colour and pH, and the peptide fraction is cohesive when it is very fine. The grade choice is a trial question: compression force, friability and disintegration are measured on the blend, not predicted from the certificate. In a powder blend, the marine odour and the taste are the limiting lines. A higher peptide fraction dissolves faster and can taste more savoury or more bitter, depending on the peptide sequence. The ash can also buffer the blend and change its pH. A bench trial at the target concentration is the only way to know whether the grade is acceptable in the matrix. ## What to write into the specification - “Hydrolysed oyster protein; species, harvest area and tissue declared on the certificate.” - “Protein ≥80.0% by Kjeldahl; nitrogen factor and basis printed on the COA.” - “Peptide content ≥70.0% by HPLC; cut-off and distribution reported.” - “Ash ≤10.0%; moisture ≤7.0%; appearance off-white to light tan.” - “Particle size ≥95% through 80 mesh; granulated on request.” - “Mollusc allergen statement; heavy metals and microbiology as listed.” A specification written this way gives the laboratory something to test and the label writer something to quote. One that names only the protein range does neither. ## When a higher grade is the wrong purchase If the capsule is small and the label dose is low, a protein target above the label need may add process without adding anything the consumer can see. If the matrix masks the marine note, a tighter sensory target may be unnecessary. The grade should follow the label and the dosage form, not a wish for the highest number on the page. The opposite mistake is buying on protein alone. A powder at 80% protein with a coarse peptide curve and 10% ash is a different material from a powder at the same protein with a fine curve and 5% ash. If the label declares a peptide amount, the peptide method and cut-off have to support it; the protein figure cannot carry that claim. If the finished product needs a collagen claim, oyster peptides are the wrong ingredient. Collagen peptides carry hydroxyproline and a different amino acid profile; the comparison is on the oyster peptides versus fish peptides page, the fish side is on the fish collagen peptides page, and the wider range is on the collagen peptides page. The catalog specification is on the product page; the release tests are on the COA page; the test methods are indexed at resources/methods; the release workflow is on the quality page. ### 03 Oyster peptide stability: moisture, odour and the pack URL: https://nutrition.rainwoodbio.com/products/protein-collagen/oyster-protein-peptides/stability/ Reviewed: 2026-11-19 Oyster peptide powder keeps when it stays dry, cool and sealed. Moisture, heat and oxygen are the drivers, and the marine odour and the colour are the early signals that they have moved. The shelf life is assigned from stability data for the exact pack and storage condition, not from the certificate or from a generic number on a data sheet. In one lineMoisture, heat and oxygen are the three variables that decide the shelf life of oyster peptide powder; the marine odour and the colour are the early signals that they have moved. ## The powder: moisture, colour and odour The catalog sets moisture at ≤7.0%. That is a release gate, not a storage allowance. The powder is hygroscopic, and an opened foil pouch takes up water from the air. As moisture rises, the powder can cake, the colour darkens through browning reactions, and the as-is protein figure falls because the same protein is now a smaller share of a heavier powder. The dry-basis figure may stay inside the specification while the powder in the drum has changed. Residual lipid is the second shelf-life variable. Oyster tissue carries a small amount of fat, and oxidation of that fraction produces the stale or rancid note that sits on top of the marine odour. A nitrogen flush or a low-oxygen pack slows the change, but it does not remove the need for a sealed pack and a cool store. Keep the powder in its original foil pouch or in an opaque, moisture-barrier container that closes properly. A clear jar on a bench is an exposure, not a storage container. If the pack has been in a cold store, let it equilibrate to room temperature before opening, so that condensation does not form on the powder. ## The solution: a separate stability question The powder dissolves in water to a clear to slightly turbid solution. Once dissolved, the protection of the dry state is gone: water activity is high, oxygen is in contact with the peptides, and the solution is a better medium for microbes. The marine note can also become stronger in solution, because the volatile fraction is no longer held in the powder matrix. A liquid intermediate needs its own hold-time study. The study should state the concentration, the pH, the temperature and the time, and it should test the peptide distribution, the appearance, the odour and the microbiological count at the end of the hold. A bulk-powder result does not transfer to a solution, and a solution result does not transfer to a different matrix. The catalog material is a powder, so the solution question belongs to the finished-product process, not to the ingredient specification. If a liquid step is unavoidable, keep it cold, keep it covered, control the pH and validate the hold time before the first production run. ## What drives degradation Factors that move oyster protein peptides during storage | Factor | What it does | Control | Moisture | Caking, browning, lower as-is protein; microbial risk | Sealed foil pouch; desiccant where needed | Oxygen | Lipid oxidation; stale or rancid odour | Low headspace; sealed pack; nitrogen flush if specified | Heat | Accelerates browning and odour change | Cool store; avoid hot loading bays and car boots | Light | Colour fade or shift; oxidation at the surface | Opaque or foil pack; dark store | pH | Changes solution colour, clarity and peptide charge | Validate the matrix pH; buffer if needed | Metal ions | Complexation and colour change in solution | Avoid iron and copper contact | Microbes | Counts rise in a wet or warm pack | Dry pack; hygiene; validated hold time | Residual enzyme | Peptide curve can keep moving if inactivation is incomplete | Ask for the inactivation record These factors act together. A warm, humid warehouse is worse than the sum of the separate effects, and a wet powder in a warm room combines moisture, heat and microbial risk in one pack. The useful question is not whether oyster peptides are stable in general, but whether this powder is stable in this pack, at this condition, for this period. ## A stability protocol for the ingredient A practical protocol states the pack, the storage condition, the time points and the tests. Long-term storage at 25 °C and 60% relative humidity and intermediate storage at 30 °C and 65% relative humidity cover the warehouse. Accelerated storage at 40 °C and 75% relative humidity stresses the pack, and a light-exposure arm covers the failure mode that a dark incubator misses. Test protein with the factor, peptide distribution, moisture, ash, appearance, odour and microbiology at each point. Add the heavy-metal panel at the start and the end if the pack or the process can introduce contamination. The report should show the individual results, not only a pass statement, and it should identify the pack, the lot family and the analytical methods. Ask for the stability summary for the pack you will buy. A 1 kg foil pouch and a 25 kg fiber drum have different surface-to-volume ratios, different headspace and different opening histories, so the data belongs to the pack. A summary from a different pack is a starting point, not a substitute. ## The finished formula changes the answer A capsule or tablet has low water activity, but the shell and the excipients can still transfer moisture. Check the fill weight, the appearance and the moisture at release and after storage, and check the capsule shell for brittleness or stickiness. A hygroscopic fill can pull water from a gelatin or HPMC shell and change both. A powder blend adds the other ingredients to the question. Reducing sugars and an elevated temperature can push browning; an acidic ingredient can change the colour and the odour; a mineral premix can add metal ions that complex with the peptides. The blend should be tested as a blend, at the water activity and the pack that will be sold. The formulator decides whether an overage is needed. That is a label and stability decision, and it does not repair a pack that lets moisture in. The ingredient specification and the finished-product specification are two documents; the second one is written after the trial, not before it. ## How the shelf life is set We do not publish a single shelf-life number for oyster protein peptides, because the pack and the storage condition set it. The assigned retest period belongs on the specification and is supported by the stability file for that pack. A number without a pack, a condition and a test panel is not a shelf life; it is a claim. After the retest period, re-assay the retained sample before extending use. Do not extend by assumption, and do not carry a bulk figure across to a repacked container. The product page lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the methods index describes the tests; the quality page describes the release workflow. ### 04 Oyster protein peptides: MOQ, packaging and lead time URL: https://nutrition.rainwoodbio.com/products/protein-collagen/oyster-protein-peptides/moq/ Reviewed: 2026-11-19 The MOQ for oyster protein peptides is 1 kg, supplied as a 1 kg foil pouch; the standard bulk pack is a 25 kg fiber drum. Lead time is 1–7 days for the standard pack. A firm quotation needs the source and species, the protein and peptide methods, the pack, the destination and Incoterm, the documents and the intended market. In one lineOne kilogram is the smallest order because it is the smallest pack that can be sampled, tested and traced as a lot. ## Why the minimum is 1 kg A 1 kg pack is large enough for a bench trial, a retained sample and an independent identity test, and small enough to ship as a parcel without a pallet. It is a commercial unit with a lot code, not a scoop from a bulk drum. That matters more for a hydrolysate than for a crystalline ingredient, because the source and the peptide distribution have to be checked on the lot that will be used. Below 1 kg, the material is usually split from a larger lot and repacked. The split adds handling, loses the original pack identity and makes traceability harder, without changing the chemistry. The 25 kg drum is the bulk unit: it reduces handling per kilogram, but it commits inventory and a longer storage period. The MOQ is a pack decision, not a volume incentive. The minimum is set by the pack rather than the grade, but a custom granulation or a tighter ash target may carry a higher minimum because it is produced to order. Ask for the MOQ in the same message as the specification, not after the sample has been approved. ## Packs and formats Standard oyster protein peptide packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture and light barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Particle profile and bulk density change | Split pack | On request | Bench work | A repack with its own traceability record The catalog form is a fine powder: ≥95% through 80 mesh. Granulation is a different particle specification, not a packing choice. If the capsule line needs a freer-flowing powder, say so before the quotation, because the change moves the particle-size line, the bulk density and possibly the lead time. ## Lead time and dispatch The standard pack is quoted at 1–7 days from order confirmation. That window covers picking, document preparation and dispatch; it does not include the shipping transit, customs clearance or the customer's own quality release. A custom granulation, a split pack or a non-standard document set adds time, and the quotation should state it separately. Do not stop at the lead time; confirm the dispatch date. The 1 kg pouch usually moves as a parcel, while the 25 kg fiber drum is palletised, and the Incoterm decides who books the freight and who clears entry. The COA, specification and allergen statement should travel with the lot; documents that arrive after the drum delay the importer's release. If the material is needed for a production date, work backwards from that date: quality release, transit, customs and the customer's own sampling all take time. A short lead time from the supplier does not shorten the import route. ## What a quotation needs Six items make a quotation firm enough to compare: - Product and source. Hydrolysed oyster protein, with the species and tissue written out; “oyster peptides” alone is not enough. - Specification. Protein method and factor, peptide method and cut-off, ash, moisture, mesh, heavy metals and microbiology. - Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated or split pack. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, TDS, SDS, allergen statement and any market-specific declaration the importer needs. - Intended use and market. Supplement, food or another use, and the market where it will be sold. A quotation without the source and the market is incomplete. The same powder can suit one destination and sit outside the file for another, and the paperwork is part of the offer. Commercial terms are stated on the quotation, not on this page. ## The sample is a lot, not a demonstration The 1 kg pack is the qualification sample. Test protein, peptide distribution, ash, moisture and microbiology before scaling, and keep a retained sample from the same pack. The lot code on the sample, the COA and the quotation should match. A sample that cannot be traced to a lot is a demonstration, not a qualification. Below 1 kg, a trial quantity comes out of a 25 kg fiber drum as a documented split, so ask before the order is placed. The repack carries its own pack identity and traceability record and is not the catalog pouch. Keep the lot code on both the split and the trial record; a bench sample and the production drum need not come from the same lot. Test the sample in the intended matrix as well as on the bench. The marine odour, the solubility and the flow can look different in a capsule blend or a powder mix, and a sample that passes the certificate can still fail the trial. ## Terms to settle before the first order The offer for a 1 kg pouch or 25 kg fiber drum should spell out the Incoterm, the lead time, the document set and the commercial conditions, then the quality side: which specification revision is being sold, how each lot's COA is handled, what retained sample is kept, how long the retest period runs and how a change to the source or the hydrolysis route is controlled. Settle those points before the first production order rather than after the first disagreement. A rejected oyster peptide lot is handled through the quotation and the quality agreement, not by negotiation after the fact. If it misses the agreed protein, peptide or arsenic line, the retained sample and a joint re-test settle it, not a photograph of the powder. Agree in advance which referee laboratory both sides accept and who carries that cost, so a dispute over a marine hydrolysate does not stall the next shipment. The product page carries the catalog specification; the COA page lists the release tests; the compliance page covers the market files; the MOQ glossary entry defines the term; the quality page describes the release file. ### 05 The regulatory file for oyster protein peptides URL: https://nutrition.rainwoodbio.com/products/protein-collagen/oyster-protein-peptides/compliance/ Reviewed: 2026-11-19 Oyster protein peptides are a mollusc-derived ingredient, so the regulatory file starts with the source and the allergen declaration, not with the protein figure. The specification, COA, contaminant results, label and destination route belong in the same file. The buyer's regulatory team confirms the route for the market; this page lists the documents and checks that belong in the file. In one lineOyster is a mollusc before it is a peptide, and the regulatory file has to carry the source, the allergen declaration and the destination route alongside the specification. ## What the file contains A complete file answers four practical questions. What is the material, and which specification version is being bought? Which lot is being released, and what does its certificate report? Which limits and label rules apply to the finished product? And what changes if the source, the process or the pack changes? The COA answers the lot question, the TDS the specification, the SDS the handling; none answers the route question alone. The file should also contain the allergen statement, the origin record, the GMO statement, the residual-solvent statement and any customer-specific declaration. Where a document is not available for the lot, the gap should be named before the order, not discovered at the port. A document list with version numbers is more useful than a folder of undated PDFs. Two regimes cover the UK market, and they are filed separately: Great Britain uses the current GB register and GB labelling, while Northern Ireland stays inside the EU framework. An oyster-derived powder needs its mollusc allergen declaration and source record checked against whichever text applies, and the buyer's regulatory team confirms the route and keeps that evidence with the order. ## European Union The EU file is built from the specification, the contaminant results, the allergen declaration and the label. General food law under Regulation (EC) No 178/2002, food information under Regulation (EU) No 1169/2011 and the contaminant rules under Regulation (EU) 2023/915 apply alongside any product-specific route. Annex II of Regulation (EU) No 1169/2011 lists molluscs and products thereof, so an oyster-derived ingredient carries that declaration in the ingredient list. A hydrolysate is a processed material, and the novel-food question is not answered by the history of the raw oyster alone. Regulation (EU) 2015/2283 is the framework; the buyer's regulatory team confirms whether the specific product falls inside it, and on what evidence, as of this review. The page does not assert that the ingredient is authorised, notified or exempt in any market. Hygiene, traceability and the general labelling rules apply to the finished product. Check the current consolidated text before relying on a citation for a launch. ## United States The US file is built around the exact dietary ingredient or food substance and its intended use. The supplier should name the basis it relies on and point to the supporting document; the buyer confirms that the basis covers the finished product and the label. If the intended use is a conventional food, the basis may be a GRAS conclusion or another route, and the file should say which one is relied on. For a supplement, the DSHEA framework and the new dietary ingredient notification route may be part of the file. A notification is not implied by the supply of a COA, and the buyer's regulatory team makes the determination. The label and the claim are reviewed separately from the certificate. The current US major food allergen list names fish and crustacean shellfish, not molluscs. An oyster-derived ingredient therefore does not automatically carry a major-allergen “Contains” statement, but a customer specification may still require one, and the brand should confirm the position as of this review. This is a labelling distinction, not a statement that molluscs are hypoallergenic. ## Contaminants and limits The contaminant panel is a finished-product calculation, not only a drum result. The table below gives the catalog limits for the material; the current destination text and the daily dose decide the final limit for the finished product. Contaminant limits to confirm for the finished product | Parameter | Catalog limit | What the file should show | Lead (Pb) | ≤3.0 mg/kg | Lot result, method and finished-product calculation | Arsenic (As) | ≤2.0 mg/kg | The arsenic basis (total or inorganic), the method and the result; speciation where the market requires it | Cadmium (Cd) | ≤1.0 mg/kg | Lot result and any category exception that applies | Mercury (Hg) | ≤0.10 mg/kg | Lot result and method | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | The count and the absence statement for the lot Arsenic is the line that needs the most care in a marine material. A total-arsenic result includes the organic forms that are common in seafood, while an inorganic-arsenic result measures the fraction that many markets regulate separately. The certificate should say which one was measured; a number without that label is not a compliance answer. ## Label and claims The label names the material, the quantity and the source in the form the destination requires. “Oyster protein peptides”, “hydrolysed oyster protein” and “oyster peptides” describe the same ingredient family, but the ingredient list should use one name consistently. “Marine peptides” is not a source name and does not distinguish oyster from fish. In the EU, nutrition and health claims are governed by Regulation (EC) No 1924/2006 and the associated register. A protein claim on the finished product depends on the protein contribution to the energy of the product as consumed; the ingredient's 80% figure is not the finished-product figure. In the US, a structure/function statement needs the DSHEA disclaimer and must be truthful and not misleading; a disease claim is not permitted. The claim review is separate from the certificate. The brand's regulatory reviewer confirms that the wording is allowed for the product, the form and the market. The certificate does not approve a claim, and a claim does not change the specification. No disease-related claim is made for this ingredient. ## Documents for the file - Specification with the version, the source and the analytical methods. - COA for the lot, with the protein factor, the peptide cut-off and the arsenic basis. - Technical data sheet and safety data sheet. - Mollusc allergen statement; origin and species record. - GMO and residual-solvent statements; heavy-metal and microbiology reports. - Change-control record for the source, the hydrolysis route and the pack. A BSE/TSE statement is not the controlling document for a marine source; the species and harvest record are. That does not make the BSE/TSE statement wrong to hold, only less relevant than the documents that actually describe the oyster. ## Checklist before the first order - The specification version, the species and the tissue are named. - The COA states the protein factor, the peptide cut-off and the basis. - The mollusc allergen statement and the origin record are on file. - The contaminant results have been converted to the finished-product dose, with the arsenic basis stated. - The label and the claim have been reviewed for the destination. - The source, the hydrolysis route and the pack are under change control. The product page carries the catalog specification; the COA page explains the lot certificate; the identity page covers the analytical evidence; the EU regulatory note gives the framework references; the quality page describes the release file. ### 06 How to prove an oyster peptide lot is what it says URL: https://nutrition.rainwoodbio.com/products/protein-collagen/oyster-protein-peptides/identity/ Reviewed: 2026-11-19 An oyster peptide lot is identified by agreement between four records: the source and species, the protein method, the peptide distribution and the mineral load. No single marker does the job, because a hydrolysate is a mixture rather than a molecule. A certificate can be genuine and still fail to prove the source if those lines are missing. In one lineA peptide hydrolysate has no single molecule to fingerprint, so identity is the agreement between the source record, the protein method, the peptide distribution and the mineral load. ## The identity layers A certificate can name the right material and still fail to prove it. The layers below are separate questions, and each one needs its own evidence. A supplier who answers only the first has described the paperwork, not the powder. Layers of oyster protein peptide identity | Layer | Question | Test | What it proves | Document | Is the source named? | Species, tissue and harvest record | Paperwork and traceability | Protein | How much nitrogen is present? | Kjeldahl with the factor stated | Protein content, not the source | Peptide | How much is peptide-sized? | HPLC distribution with the cut-off | The hydrolysis profile | Amino acids | Does the profile fit the source? | Amino acid analysis | A source signature, read with the record | Minerals | Is shell or salt present? | Ash, calcium, XRD where needed | The mineral load and a shell signal The document layer is necessary but weak on its own. A supplier declaration that says “oyster” is a statement about the supply chain; it does not show that the powder in the drum came from that chain. The analytical layers are the check on the declaration, and the declaration is the context for the analysis. ## The protein-to-peptide ratio and the ash The catalog sets protein at ≥80.0% and peptide at ≥70.0%. At the catalog minima, the peptide fraction accounts for 87.5% of the protein (70 ÷ 80). The remainder is larger protein, free amino acids and non-protein nitrogen. The ratio is a consistency check: a lot that reports 80% protein and 50% peptide is not the same material as one that reports 80% and 72%, even when the protein line is identical. The ratio also catches a common substitution. Free amino acids and non-protein nitrogen raise the Kjeldahl figure without raising the peptide fraction, so a powder built on them can pass a protein limit and fail the peptide-to-protein relationship. The reverse signal is a high peptide figure with a low protein figure, which can point to a dilution or to a different analytical basis. Ash is the mineral check. The catalog limit is ≤10.0%, which is high for a protein powder because oyster tissue carries minerals and shell contact adds calcium carbonate. A jump in ash with a stable protein figure is a signal about the raw material or the meat–shell separation. A low ash is not automatically better; it can also mean that the mineral-rich fraction was washed away with the soluble protein. The protein factor belongs in this section. Kjeldahl nitrogen is multiplied by a factor, and the factor has to be printed with the result. A protein percentage without the factor and the basis is not comparable with another supplier's percentage, even when both certificates say 80%. ## X-ray diffraction and the solid state A spray-dried peptide powder is largely amorphous, so its X-ray diffraction pattern is a broad halo rather than a set of sharp peaks. That is the expected result. A sharp pattern on top of the halo points to a crystalline phase: calcite from shell, a crystalline carrier, or an inorganic salt. The pattern identifies the phase; it does not quantify the peptide. XRD is most useful when shell contamination is suspected or when a supplier has changed the carrier. Ask for the reference pattern, the scan range and the detection limit before reading a “match” statement. A report that says “XRD conforms” without the pattern has added little, and XRD is not a routine release test for this product. The method answers a solid-state question, not a source question. It can show that calcite is present; it cannot show that the calcite came from oyster shell rather than from another calcium source. The source record and the ash trend answer that part. ## What adulteration looks like Substitutions to watch for in oyster protein peptides | Substitution | What it does | Signal | Test | Fish peptides | Similar protein and peptide figures | Different amino acid profile; fish allergen record | Amino acid analysis; species PCR on the raw material | Collagen or gelatin | Raises protein and adds a collagen marker | Hydroxyproline at collagen-like levels | Hydroxyproline by HPLC | Soy or wheat hydrolysate | Raises protein and peptide content | Plant amino acid pattern; allergen record | Amino acid profile; species or protein markers | Free amino acids | Raises Kjeldahl protein, not peptide | Peptide-to-protein ratio falls | HPLC distribution; free amino acid analysis | Maltodextrin or carrier | Dilutes protein and peptide | Lower protein; carbohydrate present | Mass balance; carbohydrate test | Shell powder | Raises ash and calcium | Ash and calcium climb; crystalline calcite | Ash, calcium, XRD | Salt | Raises ash and sodium | Ash high; sodium and chloride high | Ash, sodium, chloride The table is a set of signals, not an accusation. A single signal can have an innocent explanation: a mixed catch changes the amino acid profile, and a mineral-rich lot can sit near the ash limit without any shell. The case is built from several lines that agree, together with the source record and the lot history. ## How to write identity into the specification - “Hydrolysed oyster protein; species, harvest area and tissue declared on the certificate.” - “Protein ≥80.0% by Kjeldahl; nitrogen factor and basis printed on the COA.” - “Peptide content ≥70.0% by HPLC; cut-off and distribution reported.” - “Ash ≤10.0%; calcium reported where shell contamination is a risk.” - “Amino acid profile on file for the source; hydroxyproline reported where collagen addition is a risk.” - “Mollusc allergen statement; lot code and retained sample on file.” ## Five questions for the supplier - Which oyster species and tissue does this lot come from, and where was it harvested? - What nitrogen factor and basis were used for the protein result? - What is the HPLC peptide cut-off, and can you provide the distribution rather than the total? - What are the ash and calcium results, and has the lot been screened for shell contamination? - If the source is disputed, will you accept a joint re-test on the retained sample? Five direct answers amount to an identity file. A single protein percentage does not. The product page carries the catalog specification; the COA page shows where each figure sits on the certificate; the grades page explains the process levers; the oyster versus fish comparison covers the source question; the quality page describes the release file. ### 02.1 Oyster peptides vs fish peptides: two marine sources URL: https://nutrition.rainwoodbio.com/products/protein-collagen/oyster-protein-peptides/grades/oyster-peptides-vs-fish-peptides/ Reviewed: 2026-11-19 Oyster peptides and fish peptides are both marine protein hydrolysates, but they come from different animal groups: oyster is a mollusc, fish is a vertebrate. Their amino acid profiles, ash, allergen declarations and label names differ, so one is not a substitute for the other. The choice follows the source claim and the finished product, not the word “marine”. In one lineOyster peptides and fish peptides are both marine hydrolysates, but they come from a mollusc and a vertebrate, carry different allergen declarations and cannot be substituted for one another. ## Two marine sources, two materials Oyster protein peptides are made from the soft tissue of a bivalve mollusc. Fish collagen peptides are made from fish skin or fish scale, the connective tissue of a vertebrate. The raw materials differ in composition before the hydrolysis starts: fish skin and scale are rich in type I collagen, while oyster soft tissue is a mixture of muscle and other proteins with a broader amino acid pattern. The hydrolysis converts both into peptides, but it does not turn one source into the other. Shell is not part of the oyster peptide material. The soft tissue has to be separated from the shell before hydrolysis, and the ash and calcium results are the evidence that the separation worked. A fish collagen line has no comparable shell step, which is one reason its ash limit is lower. The process difference shows up in the drum as colour, odour and mineral load. The species and tissue belong in the specification for both materials. “Fish” can mean skin, scale or a mixed catch; “oyster” can mean one species or a blend, and meat or whole soft tissue. A certificate that names only the generic source has not described the raw material. ## The two materials side by side Oyster protein peptides and fish collagen peptides compared | Attribute | Oyster protein peptides | Fish collagen peptides | Source | Oyster soft tissue; bivalve mollusc | Fish skin or scale; vertebrate | Protein | ≥80.0% by Kjeldahl | ≥90.0% by Kjeldahl, N × 5.55 | Peptide marker | ≥70.0% by HPLC, cut-off stated | ≥90% below 3,000 Da by SEC | Hydroxyproline | Not an identity marker; reported to check collagen addition | 8.0–12.0% by HPLC | Ash | ≤10.0% | ≤2.0% | Colour | Off-white to light tan | White to off-white | Odour | Marine note; can be pronounced | Neutral to faint marine note | Allergen | Mollusc | Fish | Label name | Oyster protein peptides | Fish collagen peptides The table is a comparison of specifications, not a ranking. Either material can be the right choice for a project. What the table shows is that the numbers are not interchangeable: an oyster lot at 80% protein and 10% ash cannot be dropped into a fish collagen specification at 90% protein and 2% ash, and the reverse substitution would fail the collagen marker. ## The allergen declaration follows the source In the European Union and the United Kingdom, molluscs and fish are both on the 14-allergen list, so either ingredient has to be declared in the ingredient list. The declaration is not the same word: an oyster peptide carries a mollusc declaration, and a fish peptide carries a fish declaration. A pack that names the wrong group has a labelling error even when the analysis is correct. In the United States, fish and crustacean shellfish are on the current major food allergen list, while molluscs are not listed as a major allergen. That does not make an oyster ingredient allergen-free; it changes the labelling route, and a customer specification or a voluntary statement may still require a mollusc declaration. The brand's regulatory reviewer confirms the position for the destination as of this review. The allergen follows the raw material, not the hydrolysis. A peptide powder is still a mollusc or fish derivative after hydrolysis, and a “marine” label does not replace the source name. The source record and the allergen statement should be read together. ## What to write into the specification - “Source: oyster soft tissue, species and harvest area declared” or “fish skin or scale, species declared”. - “Protein: method, nitrogen factor and basis; minimum stated.” - “Peptide: HPLC cut-off and distribution for oyster; SEC distribution for fish collagen.” - “Hydroxyproline 8.0–12.0% for fish collagen; reported for oyster only as a check on collagen addition.” - “Ash limit and colour; ash is the mineral check for both materials.” - “Allergen: mollusc or fish, matching the source; no generic marine declaration.” The specification should also say what the material is not. Oyster protein peptides are not a collagen preparation and do not carry a collagen claim. Fish collagen peptides are not a substitute for oyster peptides where the label names oyster. A written “not” is clearer than a relabelled drum. ## What the label can say “Oyster protein peptides” and “fish collagen peptides” are ingredient descriptions that match the source and the process. “Oyster peptides” is an accepted short form when the ingredient list makes the source clear. “Marine peptides” is ambiguous: it does not distinguish a mollusc from a fish, and it should not be used in place of the source name where the label is making a source claim. “Collagen” is a source-and-composition claim. Fish collagen peptides can support it because the raw material is collagen and the hydroxyproline figure is reported. Oyster protein peptides do not support it on the current specification: the raw material is not a collagen preparation, and hydroxyproline is not the identity marker. A collagen claim on an oyster pack would need a collagen source that the file does not have. The allergen statement follows the ingredient list. A front-of-pack source claim has to match both, and the lot record has to support the species and the tissue. If the source changes, the label, the allergen statement and the specification all change with it. ## When to choose which Choose oyster protein peptides when the label calls for oyster, when a non-collagen marine protein is wanted, and when the formula can carry the marine odour and the higher ash. Choose fish collagen peptides when the label calls for collagen, when hydroxyproline is part of the specification, and when a neutral colour and a low ash are needed for a clear or delicate matrix. Do not use one as a drop-in for the other. The protein and peptide figures differ, the ash differs, the allergen differs and the analytical marker differs. A substitution changes the specification, the label and possibly the market file; it is a change control, not a purchasing decision. The numbers behind the oyster side are on the oyster protein peptides product page; the fish side is on the fish collagen peptides product page; the wider collagen range is on the collagen peptides page; the test methods are indexed at resources/methods; the release workflow is on the quality page. ### 01 Reading a phycocyanin COA: pigment, protein and the batch result URL: https://nutrition.rainwoodbio.com/products/protein-collagen/phycocyanin/coa/ Reviewed: 2026-11-19 A phycocyanin certificate has to do two jobs at once: show that the blue pigment is present and put a number on the protein it sits in. The lines that carry the argument are the UV/Vis identification, the pigment percentage with its wavelength pair, the Kjeldahl protein with its nitrogen factor, moisture, ash and the contaminant panel. The limits below are the catalog gates; the results that sit beside them belong to one lot. In one lineThe blue colour is the identity, the UV/Vis figure is the pigment and the Kjeldahl figure is the protein; a certificate that reports only one of them has not described the powder. ## The certificate as a test report Every line should be traceable to a method and a limit. When a reviewer cannot see how a number was produced, the certificate stops being a test report and becomes an assertion. The three columns below are the minimum: what was tested, how, and the gate the lot had to meet. Identity, pigment, protein and contaminants · phycocyanin | Test | Method | Release limit | Appearance | Visual | Blue, free-flowing powder | Identification | UV/Vis spectrum, 500–700 nm | Absorbance maximum near 620 nm; conforms to the reference | Phycocyanin | UV/Vis at 620 nm with turbidity correction | ≥25.0% | Protein | Kjeldahl, nitrogen × 6.25 | ≥50.0% | Moisture | Loss on drying, gravimetric | ≤7.0% | Ash | Gravimetric, ignition | ≤8.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh ## UV/Vis, Kjeldahl and the two bases The pigment result is a spectrophotometric reading. C-phycocyanin absorbs most strongly near 620 nm, and the laboratory reads that wavelength plus a second reading at 650 nm to subtract turbidity. Dilution, cell path length, the calibration standard and the reporting basis all move the number, so a percentage quoted without them cannot be reproduced in another laboratory. Protein is a separate measurement. Kjeldahl digestion converts the nitrogen to ammonia, and the result is multiplied by 6.25. Because phycocyanin is itself a protein, the pigment counted in the first line is part of the protein counted in the second: the 25.0% minimum sits inside the 50.0% minimum. The remainder is other soluble protein, not a separate ingredient, and the two figures are neither additive nor a cross-check on each other. Moisture connects the two lines. The 7.0% gate is measured by loss on drying, and the pigment result can be stated as-is or on the dry basis. A lot at 26.0% as-is with 6.0% moisture works out to 27.66% dry. Both numbers can be honest, but a buyer comparing certificates has to know which basis the supplier printed. ## Release limit versus batch result A specification line has a gate and a measurement, and the certificate should keep them in separate columns. If the result column simply repeats the gate, the reader learns nothing about the lot. What the result column should contain | Test | Release limit | What the result column shows | Phycocyanin | ≥25.0% by UV/Vis | A measured percentage, with the wavelength pair and the basis | Protein | ≥50.0% by Kjeldahl | A measured percentage and the nitrogen factor used | Moisture and ash | ≤7.0% and ≤8.0% | Two measured percentages | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | A count plus the absence statement for the lot Heavy metals are reported per element for a reason. A single total hides which metal is present, and the destination limits differ by element. In the same way, a microbiology line that says “absent” without the test method and the sample size is weaker than a count plus an absence statement. The evidence should let the reader reconstruct the release decision. ## What moves between batches Cultivation is the first source of variation. Light, nitrogen supply and the harvest point change how much pigment the biomass carries, and the drying step decides how much of that colour survives. A freeze-dried lot and a spray-dried lot from the same harvest can differ in shade and in the pigment percentage, even when the protein figure barely moves. Ash follows the culture medium and the wash. A result near the 8.0% gate points to residual salts rather than to a pigment problem, and it is worth asking whether the wash step changed. Milling sets the 80 mesh figure; a new mill or a new sieve can move that line without touching the chemistry. Appearance is the coarsest line on the page. Blue covers a wide range, and a greener or duller lot can mean chlorophyll carry-over, heat damage or a different dry. A photograph is not a release test. Read the measured pigment and the spectrum, and ask for the batch record when the shade moves outside its usual band. ## When to order an outside test An independent laboratory is worth the cost when the source is new, the destination is regulated, the colour is a label claim, or a result is disputed. Choose the panel to answer the doubt rather than to repeat the certificate. A full scan from 500 to 700 nm, an HPLC screen for synthetic blue dyes, Kjeldahl protein, ash and ICP-MS cover most of the arguments that arise with a blue powder. Ask for the detection limit of every screen. A “not detected” entry without a limit describes the method, not the sample. Keep the chain of custody intact: the material tested should be the material retained, and the report should name the lot. If a result is contested, send the retained sample, the supplier's certificate and the specification to the referee, and ask for the tests that separate a pigment concentrate from a dyed powder. ## What to compare between suppliers Six lines make a fair comparison: source and strain; pigment result with wavelength pair and basis; protein result with nitrogen factor; colour and appearance; moisture, ash and contaminants; pack size and lot code. Two offers that both say 25% but use different methods or bases are not the same powder. Traceability is the second layer. The certificate should identify the manufacturer, the culture and the drying step, and the milling route. The product page holds the catalogue values; the identity page explains how the spectrum and the protein figure are read; the grades page covers the format choice; the methods library has the spectrophotometric note; the quality page describes the release file. ### 02 Phycocyanin grades: colour value, pigment assay and format URL: https://nutrition.rainwoodbio.com/products/protein-collagen/phycocyanin/grades/ Reviewed: 2026-11-19 Phycocyanin is sold on two different specifications: a colour value used by the food-colour trade and a percentage of phycocyanin by UV/Vis used by supplement buyers. The catalog grade is a spray-dried blue powder at ≥25.0% phycocyanin and ≥50.0% protein; the format and the assay tier are separate decisions from the colour it produces. The grade you buy should be the one the label, the dosage form and the destination can live with. In one lineThe grade is a specification language before it is a number: colour value for a colourant buyer, pigment percentage for a supplement buyer, and the two do not convert without the method. ## Why phycocyanin grades are hard to line up A food-colour buyer describes the material by the colour it gives a solution. That figure is an absorbance of a defined dilution at 620 nm, often expressed as a colour value, and it depends on the dilution, the path length and the reference. A supplement buyer describes the same powder as a percentage of phycocyanin by UV/Vis and a percentage of protein by Kjeldahl. Both descriptions can be true of one lot, and neither one can be calculated from the other without the method and the standard. The practical result is that two quotations can both say “phycocyanin” and mean different products. One may be a colourant grade selected on hue intensity, the other a supplement grade selected on pigment and protein per gram. The first question to ask is which number the buyer will use to release the lot. ## Powder, granulated powder and liquid concentrate The catalog form is a milled powder at 80 mesh. Granulation and a liquid concentrate are different formats with different handling, not different purities. The table sets out what changes when the format changes. Phycocyanin formats and what changes | Property | Catalog powder | Granulated powder | Liquid concentrate | Phycocyanin (UV/Vis) | ≥25.0% | Same assay, granulated | Quoted per lot | Protein (Kjeldahl) | ≥50.0% | Same assay, granulated | Lower per gram, because the liquid contains water | Moisture | ≤7.0% | ≤7.0% | Water is the carrier | Appearance | Blue, free-flowing powder | Blue granules | Deep blue liquid | Handling | Dusts; needs a seal | Lower dust; better flow | Needs a chilled, dark store | Pack | 1 kg foil pouch, 25 kg drum | On request | On request | Usual use | Capsules, tablets, powder blends | Blends that need flow | Drinks made on site The liquid concentrate is the format to avoid unless the process can handle it. It carries water, needs a cold chain or a preservative decision, and its shelf life is shorter than the powder's. It is convenient for a beverage plant that dissolves the pigment the same day; it is a poor choice for a capsule line. ## Colour, solubility and pH The powder dissolves in water to a deep blue solution. The colour is pH-dependent: it is most stable in the mildly acidic to neutral range, and below about pH 4 the blue weakens and shifts toward green as the protein unfolds. That is a formulation constraint, not a defect in the lot. An acidic drink, a fruit-flavoured stick or a tablet with an acidic excipient should be checked for colour after storage, not only at mixing. Heat and light both attack the chromophore. A process that pasteurises the solution in clear glass combines two of the failure modes at once, and the colour can fade within the hold. The powder is hygroscopic; a pouch left open in a humid room takes up moisture and cakes, and the caked material is harder to weigh and slower to dissolve. ## Dose arithmetic with a 25% powder The pigment figure is the bridge between the label and the weigh-up. A formula that targets 100 mg of phycocyanin per serving needs 100 ÷ 0.25 = 400 mg of a 25.0% powder. That same 400 mg carries about 200 mg of protein at the 50.0% minimum. The arithmetic is not a dose recommendation; it is the calculation that keeps the label and the batch record consistent. For a colour application, the target is usually a shade in the finished product rather than a milligram figure, and the use level is found by trial in the matrix. The overage question belongs to the formulator: a colour that fades over shelf life can be dosed higher at the start, but the label, the use level and the destination rules have to support the number. Do not set an overage by assumption and then write it into the specification as if it were an assay. ## What to write into the specification - “Phycocyanin, CAS 11016-15-2, from Arthrospira platensis; blue, free-flowing powder.” - “Phycocyanin ≥25.0% by UV/Vis at 620 nm with turbidity correction; state the basis.” - “Protein ≥50.0% by Kjeldahl, nitrogen × 6.25; state that the pigment is part of this figure.” - “Moisture ≤7.0%; ash ≤8.0%; ≥95% through 80 mesh.” - “Heavy metals and microbiology as listed; report each element separately.” - “Format: powder, granulated or liquid, with the pack and the storage condition.” - “Destination, use level and label name confirmed before the order.” We supply the powder. Granulation is a separate specification, and the liquid concentrate is a different purchase with its own pack and shelf life. A change of format should go through a written change control rather than a line on the order. ## When a different grade is the wrong buy If the buyer's release number is a colour value, a certificate built only on the pigment percentage has not answered the question; ask for the colour value method and the reference. If the release number is the pigment percentage, a colour-grade certificate without the UV/Vis method and basis is not comparable. The two languages describe one powder, but they are not interchangeable on a specification. Whole spirulina is not a grade of phycocyanin. It is the dried alga, green rather than blue, with a much lower pigment fraction and a different label name; the comparison is on the level-four page. The product page carries the catalogue values; the COA page shows how each figure is reported; the stability page covers the colour loss; the methods library describes the spectrophotometric reading; the quality page covers the release file. ### 02.1 Phycocyanin vs spirulina: the isolate and the whole alga URL: https://nutrition.rainwoodbio.com/products/protein-collagen/phycocyanin/grades/phycocyanin-vs-spirulina/ Reviewed: 2026-11-19 Phycocyanin is the blue protein-pigment extracted from spirulina; whole spirulina is the dried cyanobacterium. The isolate delivers the pigment in a small mass and a clean blue, while the whole biomass delivers a green powder with fibre, other pigments and a characteristic taste at a much lower pigment fraction. They are not interchangeable by weight, and the label name follows the material. In one lineThe isolate is a colour and a protein figure; the whole alga is a food with a much lower pigment fraction, a green colour and a taste the isolate does not have. ## The isolate and the whole organism Spirulina is the dried biomass of Arthrospira platensis, a cyanobacterium grown in open or closed culture and harvested, washed and dried. It is a food in the everyday sense: the whole cell, with its protein, fibre, lipids, chlorophyll and phycocyanin still together. Phycocyanin is a phycobiliprotein inside that cell, a water-soluble protein carrying a blue bilin chromophore. The isolate is made by extracting the biomass with water, separating the pigment-protein from the cell debris and drying the extract. That process is the whole difference. The isolate is a fraction of the alga, not a more colourful version of the powder. It has lost most of the fibre and the chlorophyll, it carries the pigment at a higher percentage, and its taste is milder but not absent. A buyer who handles the two as one material will size the dose, the label and the regulatory file on the wrong basis. ## The numbers side by side Phycocyanin isolate against whole spirulina powder | Property | Phycocyanin isolate (catalog) | Whole spirulina | Phycocyanin | ≥25.0% by UV/Vis | A minority of the dry mass; the published range is roughly 10–20% | Protein | ≥50.0% by Kjeldahl | Commonly quoted at 55–70% on a dry basis | Colour | Blue powder; deep blue solution | Green powder; green suspension | Mass for 100 mg of pigment | 400 mg at 25.0% | About 0.5–1.0 g at the published range | Fibre and cell wall | Largely removed by the extraction | Present | Ash | ≤8.0% | Varies with the culture medium and the wash | Label name | Phycocyanin, or spirulina extract, per the market | Spirulina, Arthrospira platensis | Usual category | Colour additive or a defined ingredient | A whole food The mass row is the arithmetic that matters. A formula that needs 100 mg of phycocyanin takes 400 mg of the 25.0% isolate, or roughly half a gram to a gram of whole spirulina at the published range. The whole powder therefore brings several times the mass for the same pigment, and with that mass come the fibre, the chlorophyll and the taste. The protein figures are not the same measurement in disguise. In the isolate, the pigment is part of the protein, so the ≥25.0% pigment sits inside the ≥50.0% protein. In the whole alga, the protein figure includes phycocyanin plus the other cellular proteins, and the two are not reported as separate release lines. ## Why the whole alga cannot give a clean blue Whole spirulina looks green because chlorophyll absorbs red and blue light and dominates what the eye sees. The phycocyanin is there, but its blue is masked by the green. Adding more whole powder to a formula to push the blue therefore adds chlorophyll at the same time, and the shade drifts toward green rather than becoming more intense. The isolate removes the chlorophyll, which is why a small mass can produce a deep blue solution. The isolate has its own colour limits. The blue is pH-dependent and fades with light and heat, so a low-pH drink or a hot process can dull it. Whole spirulina carries the pigment inside a cell and a matrix, and its colour behaviour in a drink is different again. Neither material is a drop-in for a synthetic dye, and the shade should be validated in the finished matrix. ## The label names one material, not the other A product that declares “spirulina” and contains the isolate has described the source but not the ingredient; a product that declares “phycocyanin” and contains whole spirulina powder has overstated the pigment. The two names are not synonyms, and the regulatory category behind each one is different. The isolate's label name also depends on the market: a colour use and a supplement use can require different wording for the same powder. The protein claim is the other label trap. Whole spirulina can contribute grams of protein per serving because the serving is grams; the isolate is used at a few hundred milligrams for colour, which contributes a small fraction of that. A protein claim built on phycocyanin is a different proposition from one built on whole spirulina, and the label should follow the material actually weighed into the batch. ## Two regulatory routes, not one Whole spirulina has a long food history and is usually handled as a food or a food ingredient. The isolate is a concentrate with a defined specification, and the route depends on the market and the use: a colour additive, a food used for colour, or a dietary ingredient in a supplement. The route decides the permitted categories, the use level, the label wording and the documents the importer keeps. This page does not assert that either material is authorised for a particular use in a particular market. The buyer's regulatory team confirms the route for the destination, and the supplier keeps the specification, the source and the process under change control. A colour-additive file and a whole-food file are not interchangeable, even when both describe the same organism. ## When to choose which Choose the isolate when the job is colour, when the mass per serving is small, or when the formula needs a defined pigment figure that can be released against a UV/Vis method. Choose whole spirulina when the product is positioned as the whole food, when the fibre and the other cell components are part of the offer, or when a green powder is acceptable. If the job is protein rather than colour, neither is the obvious choice: a collagen peptide or a soy protein isolate is a protein purchase with its own specification. Do not mix the two to hit a label number. A blend of isolate and whole powder can be built to any pigment figure, but the label, the taste and the regulatory category then have to be rebuilt around the blend. The product hub carries the isolate specification; the grades page compares the formats; the identity page covers the tests; the methods library describes the pigment assay; the quality page describes the release file. ### 03 Phycocyanin stability: the blue fades first URL: https://nutrition.rainwoodbio.com/products/protein-collagen/phycocyanin/stability/ Reviewed: 2026-11-19 The blue chromophore is the first thing to go. Phycocyanin bleaches under light, denatures under heat and shifts away from blue as the pH falls, while the dry powder pulls moisture from the air. A sealed, dark, dry pack is the only format that keeps the colour through a normal shelf life, and the retest period has to be earned for that pack. In one lineThe blue is the vulnerable part: light and heat bleach the chromophore, moisture and pH move the protein, and the pack decides how much of that the powder sees. ## The powder: moisture, light and colour Moisture is the quiet failure. The 7.0% limit is a release measurement, not a property the drum keeps. Spray-dried phycocyanin is hygroscopic: open the pouch in a humid room and the powder starts to take up water, the loss on drying climbs, the as-is pigment figure falls and the powder begins to cake. The seal, the liner and the storage humidity matter as much as the release gate, although the certificate does not print them. Light acts faster. The chromophore exists to absorb visible light, which is exactly why the powder is blue and exactly why it is fragile. A clear jar on a bench is an exposure, and the surface can lose shade within days. Keep the material in the foil pouch or in an opaque container that actually closes. Warmth multiplies both effects. A sealed pack usually survives an ambient warehouse; it does not survive a hot loading bay, a car boot or a greenhouse. After cold storage, let the pack reach room temperature before opening, so condensation does not settle on the powder. ## The solution: the least stable format Dissolved in water, the protein is fully exposed. Light, oxygen, heat and pH act at once, and the blue can fade while the protein figure still looks acceptable. A ready-to-drink line adds a pasteurisation or hot-fill step; a powder stick avoids that heat because the consumer adds water at the point of use. pH is the variable that catches formulators out. The blue is stable in the mildly acidic to neutral range, and below about pH 4 it weakens and turns toward green as the protein unfolds. A fruit drink built at pH 3.2 can lose the shade that looked right in water at pH 6. If the matrix is acidic, validate the colour in the matrix rather than in a buffer. A liquid can be protected with an opaque pack, a pH inside the stable band, low dissolved oxygen and a validated hold time, but each of those is a process decision that has to be tested. A bulk-powder result does not transfer to a beverage: the matrix, the heat load and the pack each change the rate. ## What drives degradation Factors that move phycocyanin during storage | Factor | Effect on the powder or solution | Control | Light | Bleaches the chromophore; pigment assay falls | Opaque or foil pack; dark store | Heat | Unfolds the protein; accelerates colour loss | Cool process; controlled store | Moisture | Raises loss on drying; cakes; lowers the as-is assay | Sealed pouch; desiccant where needed | pH | Shifts the blue toward green; precipitation near the isoelectric point | Validate matrix pH; buffer if needed | Oxygen | Surface and dissolved oxidation | Low headspace; nitrogen flush where specified; sealed pack | Metal ions | Protein binding and colour change in solution | Avoid iron and copper contact These factors combine rather than add. A warm, bright, humid store is worse than three separate stresses, and an acidic drink in clear glass stacks four of them in one container. The useful question is not whether phycocyanin is stable, but for how long it stays blue in a named pack and matrix. ## A stability protocol for the ingredient Build the study around the failure modes, not only around the standard conditions. A long-term arm (25 °C, 60% relative humidity) and an intermediate arm (30 °C, 65% relative humidity) model the warehouse; an accelerated arm (40 °C, 75% relative humidity) stresses the pack. For this material, add a light-exposure arm, because a dark incubator cannot see the main failure. At each pull, measure pigment by UV/Vis, protein by Kjeldahl, moisture, ash, appearance and microbiology. Record colour as a number rather than as “blue”, so a drift is visible before it becomes a reject. Ask for the individual results, not a summary that says stable, and ask which pack and lot family the study used. Buy the study that matches the pack you will buy. A 25 kg drum and a 1 kg pouch differ in headspace and in opening history, and a result from a different format is a starting point rather than a substitute. ## The finished formula changes the answer A capsule or tablet keeps water activity low, but the shell and the excipients can still pass moisture, and an acidic excipient can move the local pH. Check moisture and colour at release and after storage, not only the fill weight. A two-piece shell that is clear exposes the fill to light even when the outer carton is opaque. A stick pack depends on the foil and the seal; a pinhole fails the pack, so inspect the strip as well as the powder. A beverage combines light, pH, heat and oxygen, so the bulk stability result is only a starting point. The formulator decides whether a colour overage is needed. That decision belongs to the label and stability file, and it cannot repair a pack that lets light or moisture in. An overage written into the batch record but not declared on the label creates a different problem from a colour that fades. ## How the shelf life is set There is no single shelf-life figure for phycocyanin, because the pack and the storage condition set it. The retest period on the specification is supported by the stability file for that pack; a number quoted without a pack, a condition and a test panel is a claim rather than a shelf life. At the end of the retest period, re-assay the retained sample before extending use. Never add time without a new assay, and never apply a bulk figure to a container that has been repacked. The product page shows the packs on offer; the COA page lists what is released; the grades page compares formats; the methods library explains the pigment assay; the quality page shows the release workflow. ### 04 Phycocyanin MOQ, packs and ordering URL: https://nutrition.rainwoodbio.com/products/protein-collagen/phycocyanin/moq/ Reviewed: 2026-11-19 Phycocyanin ships at a 1 kg minimum in a foil pouch, with a 25 kg fiber drum for production; the standard lead time is 1–7 days. A firm quotation needs the pigment basis, the pack, the destination and Incoterm, the document set and the use the powder will serve. Those six items decide whether the offer describes the material the buyer is actually qualifying. In one lineOne kilogram is the smallest unit that can be sampled, tested and traced as a lot, and the pack has to keep light out before it keeps freight cheap. ## Why the minimum is 1 kg The minimum is set by the pack, not by a sales threshold. A kilogram gives a formulator enough for a bench trial, a retained sample and an independent check, and it still travels as a parcel rather than a pallet. That matters when material is needed before the production plan is signed off. Anything smaller is usually split out of a larger lot and repacked. The repack adds handling, breaks the link to the original pack and makes the lot history harder to follow, while the powder itself is unchanged. The 25 kg drum reduces handling per kilogram but ties up stock of a pigment that ages in light, so the larger pack is a commitment as well as a saving in effort. ## Packs and formats The pouch is a light barrier as much as a container. Foil keeps the blue from the light that bleaches it, and the heat seal keeps moisture out; a fiber drum relies on its inner liner for the same job. Repacking into a clear jar removes the protection the material was packed for. Standard phycocyanin packs | Pack | Weight | Where it fits | Handling | Foil pouch | 1 kg | Trial, sample and small runs | Opaque barrier; close it tightly after use | Bulk drum | 25 kg | Production | Liner against moisture; code on drum and liner | Granules | On request | Better flow, less dust | Particle size changes | Liquid concentrate | On request | Drink plant, same-day use | Water carrier; cold, dark storage The catalog form is an 80 mesh powder: ≥95% through 80 mesh. Granulation and the liquid concentrate are separate specifications, not packing options. If the line needs a freer-flowing powder or a liquid, raise it before the quotation, because the change moves the particle-size or moisture line and can move the dispatch date. ## Lead time and dispatch The 1–7 day window runs from order confirmation to dispatch. It covers picking, document preparation and handover to the carrier; it does not include transit, customs or the customer's own quality release. A granulated lot, a liquid concentrate or a non-standard pack takes longer, and the offer should say so as a separate line. Ask for a dispatch date rather than only a lead time. A drum travels on a pallet and a pouch travels as a parcel, and the trade term decides who books the freight and who clears customs. Paperwork should move with the lot rather than follow it. ## What a quotation needs Six details make an offer comparable: - Material and source. Phycocyanin from Arthrospira platensis, CAS 11016-15-2. - Specification. Pigment result and method, protein result and factor, moisture, ash, particle size, heavy metals and microbiology. - Quantity and pack. The 1 kg pouch, the 25 kg drum, or a granular or liquid variant. - Destination and Incoterm. Country, place of delivery, and the trade term. - Documents. Certificate, specification, safety data sheet and any statement the importer needs. - Use and market. Colourant, supplement or another use, and the country where the finished product will be sold. An offer without the use and the market is incomplete. One powder can fit a destination and fall outside the file for another, and the paperwork is part of what is being sold. Commercial terms are not published on this page; they appear in the quotation. ## The sample is a lot, not a demonstration Qualify on a lot, not on a spoonful. The 1 kg pouch is the qualification sample: test pigment, protein, moisture and microbiology before scaling, and retain material from that same pouch. Pouch code, certificate and offer should agree; a sample without that trail is a demonstration, not a qualification. If a bench trial needs less than a kilogram, say so before ordering. Material split from a bulk lot has its own repack history and is not the catalog unit; record it as a repack. The bench sample and the production drum may come from different lots, so check rather than assume, and keep the sample out of daylight: a faded sample no longer represents the lot. ## Terms to settle before the first order Settle the quality terms alongside the commercial ones. Write down which specification revision applies, what each lot certificate must show, how the retained sample is kept, when the retest falls due and how a change is approved, before the first order is placed. A quality agreement signed before the first production order is worth more than one negotiated after a dispute. Returns and replacements follow the offer and that agreement. A lot that fails the agreed specification should go to the retained sample and a joint re-test, not to a photograph of the powder; colour images are a poor substitute for a measured pigment figure. Settle who pays for the referee work and which laboratory both sides will accept. The product page holds the catalogue values; the COA page sets out the release panel; the compliance page covers market files; the methods library explains the pigment assay; the quality page documents the release file. ### 05 The regulatory file for phycocyanin URL: https://nutrition.rainwoodbio.com/products/protein-collagen/phycocyanin/compliance/ Reviewed: 2026-11-19 Phycocyanin is supplied as a blue protein-pigment concentrate from Arthrospira platensis, CAS 11016-15-2. Its regulatory position is not fixed by the name: a colour use, a food use and a supplement use can fall under different rules, and the destination decides which one applies. The buyer's regulatory team confirms that route; this page lists the questions, the limits and the paperwork it will need. In one lineThe specification describes the powder; the regulatory file has to show which category the destination allows, at what level and under which ingredient name. ## What the file contains The file has to establish four things: what the material is, which lot is being released, which category the destination applies, and what the label may say. The certificate answers the lot, the technical data sheet answers the material, and the safety data sheet answers handling. None of them settles the category, and the category is what decides the rest. A blue concentrate can be treated as a colour additive, as a food used for its colouring properties, or as a dietary ingredient. Each of those routes carries its own permitted uses, use levels, specifications and label wording. The same drum can sit inside one route and outside another, so the file should record the route the buyer selected and the document that supports it. Great Britain and Northern Ireland are separate files. England, Scotland and Wales use the current GB rules and register; Northern Ireland applies the EU framework. The destination decides which one the buyer's team prepares. ## European Union In the EU, the first decision is the category. A colour additive is assessed under Regulation (EC) No 1333/2008 and appears in the Union list with its permitted food categories and conditions. A food whose colouring properties are used remains a food and follows a different route. A material that was not used for food before 15 May 1997 falls under the novel food Regulation (EU) 2015/2283 and needs an authorisation before it can be placed on the market. Labelling is governed by Regulation (EU) No 1169/2011, and the contaminant checks follow the current Regulation (EU) 2023/915. Nothing on this page asserts that phycocyanin is authorised for a particular use in the EU. The buyer's regulatory team identifies the route for the member state, the use level and the finished product, and keeps the supporting text on file. ## United States In the US, the intended use decides the route. A colour use is checked against 21 CFR 73.1530, which covers spirulina extract as a colour additive for defined food categories and conditions; the current text is the reference. A dietary supplement is assessed under the DSHEA framework, where a new dietary ingredient notification under 21 U.S.C. 350b can be part of the path. Labelling follows 21 CFR 101. Ask the supplier to state its basis in writing and to attach the document behind it. The buyer then checks whether that basis extends to the finished product and its claim. A colour-additive listing does not answer a capsule question by itself, and a supplement route does not authorise a colour use in a conventional food. ## Contaminants and limits A drum result is not a serving result. The table gives the catalog release panel; the destination text and the daily intake then decide what the finished product may carry. Contaminant limits to confirm for the finished product | Parameter | Catalog release limit | What the file should show | Lead (Pb) | ≤3 mg/kg | Lot result, method and the finished-product calculation | Arsenic (As) | ≤2 mg/kg | Lot result and the destination limit that applies | Cadmium (Cd) | ≤1 mg/kg | Lot result and any category exception | Mercury (Hg) | ≤0.1 mg/kg | Lot result and method | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Counts and absence statements for the lot Convert before comparing. Multiply the powder result by the ingredient's share of the serving, then compare with the limit for the category. At a low colour use the contribution is small; at a supplement dose of hundreds of milligrams the same drum result carries more weight. The calculation, not the certificate alone, is what the reviewer needs. ## Label and claims The label has to name the material in the form the destination expects. The regulatory name, the source and the colour function are separate decisions from the brand name, and the reviewer should see the exact wording before artwork is approved. A label that says “spirulina” while the drum holds a phycocyanin concentrate describes a different ingredient. No therapeutic, disease or curative claim is made for this material on this page, and none should reach a label without the brand's own review. A structure or function claim belongs to the brand and depends on the market, the wording and the finished product. A certificate is not a claim approval, and a claim cannot rewrite a specification. Colour wording such as “blue” or “adds colour” is a functional description, not a health claim. ## The documents in the file Keep a versioned list rather than a folder of undated PDFs. The core set is the specification, the lot certificate, the technical data sheet, the safety data sheet and the allergen and GMO statements. The origin record, the source and strain, the residual-solvent statement and any customer-specific declaration sit alongside them. A colour use needs the statement the destination expects for that category, such as the identity and specification basis for a colour-additive review. A supplement use needs the basis the brand relies on and the intake calculation. If a statement is missing for the lot, record the gap before the order rather than discovering it at the port. ## Checklist before the first order - Specification version, CAS number, source and strain are recorded. - The destination category is named, with the document that supports it. - Certificate, technical data sheet, safety data sheet, allergen, GMO, origin and residual-solvent statements are on file. - Contaminant results are converted to the finished-product dose. - Use level and label wording have been reviewed for the destination. - Source, process and pack sit under change control. - Offer, specification and certificate carry the same version. The product page carries the catalogue values; the COA page reads a lot certificate line by line; the identity page sets out the analytical argument; the methods library describes the assays; the quality page shows the release file. ### 06 How we prove a phycocyanin lot is the pigment URL: https://nutrition.rainwoodbio.com/products/protein-collagen/phycocyanin/identity/ Reviewed: 2026-11-19 A phycocyanin lot is the named material when the spectrophotometric identity, the pigment figure, the protein figure and the mass balance agree. The visible blue is a clue, not a test: a synthetic dye can match the hue, and a blue-green whole-spirulina powder can look close in colour. Identity is proved by the spectrum and by what else the powder contains. In one lineIdentity is a spectrum plus a mass balance: the absorbance maximum near 620 nm says phycocyanin, the protein and ash say what else is in the powder, and colour alone says nothing. ## The four identity layers Naming the material on paper is the easy part; proving that the powder is that material takes separate measurements. The layers below ask different questions, and each one needs its own evidence. An answer that stops at the first layer describes a document, not a drum. Four layers of evidence for phycocyanin identity | Layer | Question | Test | What it proves | Document | Is the material named? | Name, CAS number, source | Paperwork only | Spectrum | Is the pigment phycocyanin? | UV/Vis scan, 500–700 nm | The chromophore and its protein environment | Protein | Is the powder a protein concentrate? | Kjeldahl nitrogen × 6.25 | Protein mass, including the pigment | Mass balance | Is it diluted or dyed? | Moisture, ash, dye screen | Consistency of the numbers ## The 620/280 ratio and what it does not say Phycobiliprotein work often quotes a purity index: the absorbance at 620 nm divided by the absorbance at 280 nm. The 620 nm reading sits on the pigment; the 280 nm reading sits on the aromatic amino acids of the protein. A high ratio means the preparation is rich in phycocyanin relative to other proteins, and a low ratio means the powder carries more non-pigmented protein or dilution. The index is useful for comparing preparations, but the thresholds depend on the method, the buffer and the standard, so a number without those details is not a grade. The catalog specification does not set a 620/280 ratio, and we do not use one as a release gate. It is a supporting check, not an identity test: a dyed powder can be made to absorb at 620 nm, and a pure phycocyanin can lose ratio after heat damage. Read it beside the protein figure, the ash and the spectrum rather than on its own. The turbidity correction is the other ratio that matters. The 620 nm reading is corrected with a reading at 650 nm, where the pigment absorbs little, so that suspended particles do not inflate the result. A certificate that reports the pigment percentage without the wavelength pair has left the correction invisible. ## X-ray diffraction: the wrong primary tool here Phycocyanin is an amorphous protein preparation, not a crystalline small molecule. X-ray diffraction is therefore a poor identity test for it: there is no sharp pattern to match, and a “conforms” statement without a reference does not prove the pigment. A supplier who offers XRD as the identity evidence for this material has offered a method that does not answer the question. XRD still has a narrow use. It can detect a crystalline adulterant, such as a mineral filler or a crystalline dye, in a powder that should be amorphous. If a lot is suspected of carrying such a filler, ask for the pattern, the reference and the detection limit, and read the result as a screen for that contaminant rather than as proof of phycocyanin. For the identity itself, the spectrum and the protein figure carry the argument. ## What adulteration looks like Substitutions seen in blue powders and the signals they leave | Substitute | Effect on the powder | Signal | Test to run | Whole spirulina | Green powder; lower pigment per gram | Green hue; chlorophyll; low 620/280 ratio | Microscopy, spectrum, pigment figure | Synthetic blue dye | Matches the colour, not the protein | Blue without a protein spectrum; dye peak | UV/Vis scan, HPLC dye screen | Other phycobiliproteins | Similar chemistry, different spectrum | Shifted maximum; extra peak | Full spectrum, chromatography | Maltodextrin or salt | Dilutes pigment and protein | Low pigment and protein; high ash or moisture | Mass balance, ash | Chlorophyll | Green cast; masks the blue | Green hue; absorption near 660 nm | Spectrum, visual Colour is the weakest signal. A dye can reproduce the blue, and a green cast can be read as a natural variation. The stronger signals are the shape of the spectrum, the protein figure and the mass balance. A certificate that reports appearance and a pigment percentage but no spectrum has not tested the substitution most likely to occur. ## What the identity clause should say - “Phycocyanin, CAS 11016-15-2, from Arthrospira platensis.” - “Identification by UV/Vis spectrum from 500 to 700 nm; maximum near 620 nm; report the wavelength pair and the standard.” - “Phycocyanin ≥25.0% by UV/Vis with turbidity correction; state the basis.” - “Protein ≥50.0% by Kjeldahl, nitrogen × 6.25.” - “Moisture ≤7.0%; ash ≤8.0%; ≥95% through 80 mesh.” - “No synthetic colourant and no added carrier above the stated limit.” - “Destination and label name confirmed before the order.” ## Five questions for the supplier - Can you provide the full UV/Vis spectrum, not only the pigment percentage? - Which wavelength pair and standard were used for the pigment figure, and on which basis is it reported? - What is the protein result, and which nitrogen factor was applied? - What are the moisture and ash results, and do they close the mass balance with the pigment and protein? - Has the lot been screened for synthetic blue colourants, and what was the detection limit? Those five answers, taken together, are the identity file. One assay percentage is not. The product page holds the catalogue values; the COA page maps each number to its certificate line; the grades page compares the formats; the level-four page separates the isolate from the whole alga; the methods library explains the spectrophotometric reading. ### 01 Reading the sea cucumber peptide COA: protein, peptide and size URL: https://nutrition.rainwoodbio.com/products/protein-collagen/sea-cucumber-peptides/coa/ Reviewed: 2026-11-19 A sea cucumber peptide certificate reports protein by Kjeldahl, peptide content and molecular weight distribution by HPLC, moisture, ash, heavy metals, microbiology and particle size. Each line needs its method and its release limit, and the source has to be named. The figures are not interchangeable: protein is a nitrogen calculation, peptide content is an HPLC fraction, and the size distribution says how much of the material sits below 3,000 Da. In one lineProtein, peptide content and molecular weight are three different measurements, so a sea cucumber peptide COA only reads correctly when each figure carries its method, its basis and its cut-off. ## The parameters on the certificate The specification has nine release lines. The table shows what each one means and which method produces it; it is the specification, not a lot result. A number without its method cannot be compared across suppliers. COA parameter list · sea cucumber peptides, catalogue specification | Parameter | Method | Release limit | Appearance | Visual | Off-white to light tan powder | Protein | Kjeldahl, factor and basis stated on the certificate | ≥90.0% | Peptide content | HPLC | ≥80.0% | Molecular weight | HPLC size distribution | ≥80% below 3,000 Da | Moisture | Gravimetric | ≤7.0% | Ash | Gravimetric, furnace | ≤5.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh Two lines sit outside the table. The identification line, “protein and peptide profile conform”, is a conclusion drawn from the same HPLC work and should be supported by the chromatogram. The source line names the species and tissue and decides what the material can be called. The identity page sets out how that source line is supported. ## Protein, peptide content and the basis Kjeldahl measures nitrogen, not protein. The laboratory digests the sample, titrates the ammonia and multiplies the nitrogen by a conversion factor. That factor is a convention, so the certificate has to print it. A factor of 6.25 assumes 16% nitrogen; 5.55 assumes about 18%, so the same nitrogen result produces two different protein percentages. The basis matters as much. The catalogue sets protein at ≥90.0%, moisture at ≤7.0% and ash at ≤5.0%. Read as-is, those limits add to 102%, so the protein figure must be on a dry basis for them to close. At 7.0% moisture, a 90.0% dry-basis result is about 83.7% as-is, the figure a formulation must use. Peptide content is a separate measurement. The catalogue requires ≥80.0% by HPLC, and the method should define what counts as a peptide: the column, the calibration standards and the integration cut-off. A lot with 90.0% protein and 80.0% peptide has about 10 percentage points of protein that the peptide method does not count, which may be free amino acids, very small peptides or unseen nitrogen. The molecular weight line needs the distribution, not only a pass mark. “≥80% below 3,000 Da” leaves up to 20% of the mass above the cut-off, and a lot can meet the gate with a high-molecular-weight shoulder that hazes drinks. ## Release limit and batch result The release limit is the boundary; the batch result is what the laboratory measured. Both belong on the page, in separate columns, with the method named. A result column filled with the specification range is a copy of the gate, not evidence about the lot. What the result column should show | Parameter | Release limit | Result column | Protein | ≥90.0% on the stated basis | The measured percentage, the factor and the basis | Peptide content | ≥80.0% by HPLC | The measured percentage and the HPLC method | Molecular weight | ≥80% below 3,000 Da | The measured distribution, not only the pass mark | Moisture and ash | ≤7.0% and ≤5.0% | A measured percentage for each | Heavy metals and microbiology | Per element; counts and absence | A figure per element and the count or absence statement for the lot “Conforms” is a conclusion, and the reader should be able to reach it from the numbers. For heavy metals, that means a figure for each element, not a single total. For microbiology, it means the count plus the absence statement. For particle size, it means the measured percentage through the 80 mesh sieve, not the word “fine”. ## What moves between lots The raw material moves first. Sea cucumber is a group of species, not one animal, and body-wall composition changes with species, season, size and whether the material is wild-caught or farmed. A plant taking mixed species produces a peptide whose amino acid profile, colour and ash move with the mix. The hydrolysis moves next. Enzyme choice, dose, time and temperature decide how far the chains are cut and how much falls below 3,000 Da. Over-hydrolysis raises the free amino acid fraction and can lower the peptide content the HPLC method counts; under-hydrolysis leaves a high-molecular-weight shoulder. Filtration and drying then fix the moisture, the particle size and part of the colour. Ash and colour are the quiet variables. The 5.0% ash limit is wider than a fish collagen limit because the body wall carries mineral material; a lot near the limit can meet the specification and still haze a clear drink or taste saltier. Colour moving from off-white to light tan is not an identity failure, but a shift outside that window deserves the batch record. ## When an outside laboratory earns its fee Order an independent test for a new species or supplier, a first shipment into a regulated market, a species or collagen label, or a disputed result. The useful panel is not a repeat of the certificate: protein by Kjeldahl with the factor, peptide content and size distribution by HPLC, an amino acid profile, ICP-MS and microbiology on one sample. Arsenic deserves its own line in a marine material. Total and inorganic arsenic are different measurements, and a total does not say which fraction was found. Ask for the method and the destination limit. If the label names a species, ask how it was established; a highly hydrolysed powder is a difficult matrix for DNA, so the raw-material record and the process audit often carry more weight than a PCR result. Chain of custody matters. The sample tested should be the sample retained, and the report should identify the lot. When a result is contested, give the referee the retained sample, the certificate and the specification. ## Six lines to compare between suppliers Put six lines side by side: species and tissue; protein with factor and basis; peptide content and HPLC method; molecular weight distribution; moisture, ash and particle size; contaminant and allergen statements. Two quotations that agree on protein but not the rest are not describing the same powder. Traceability is the second layer: the certificate should name the manufacturer, the species and tissue, and the hydrolysis and drying steps. The specification sits on the sea cucumber peptides product page. The fish collagen COA shows how a collagen marker changes the document, and the analytical methods library explains the HPLC and ICP-MS work. The release workflow is on the quality page. ### 02 Sea cucumber peptide grades: source, peptide cut and particle size URL: https://nutrition.rainwoodbio.com/products/protein-collagen/sea-cucumber-peptides/grades/ Reviewed: 2026-11-19 The catalogue carries one sea cucumber peptide specification, but the material varies by source, by where the peptide cut sits inside the ≥80% below 3,000 Da window, and by particle size. The grade decision is the dosage form, the label and the process, not a higher protein figure. A powder that suits a capsule may be wrong for a clear drink; a granulated powder that flows well may dissolve too slowly in a stick. In one lineThe catalogue has one sea cucumber peptide specification; the grade decision is the source, the particle size and the dosage form, not a different protein percentage. ## Why one specification still leaves choices “Grade” here does not mean a ladder of protein percentages. The catalogue fixes protein at ≥90.0% by Kjeldahl, peptide at ≥80.0% by HPLC, at least 80% below 3,000 Da, ash at ≤5.0% and moisture at ≤7.0%. What remains is the raw material, the shape of the distribution and the physical form. The source is the first choice. Sea cucumber is a group of species, and one body wall is not the same raw material as another. Single-species material supports a species name and a tighter trace; mixed-species material varies more in colour, ash and amino acid profile. Tissue and wild-caught or farmed origin belong in the same record. The second choice is the peptide cut. The gate is a minimum: at least 80% below 3,000 Da. A tighter cut dissolves faster and can be clearer in a drink, but it raises the free amino acid fraction and can change taste and odour. A looser cut inside the same gate is not a different grade, but it behaves differently in a formula. ## Four practical options Four options sit behind the single specification. Only the first two are catalogue formats; the others are development briefs that must be written into the specification and label. Practical sea cucumber peptide options | Option | What changes | Catalogue status | Typical use | Standard 80 mesh powder | ≥95% through 80 mesh; fast wetting; dust when poured | Catalogue format | Capsules, sticks, drink mixes | Granulated powder | Flow, dust, bulk density and wetting rate | On request | Tablets and high-speed filling | Tighter peptide cut | More mass below 3,000 Da; faster dissolution; more free amino acids | Development brief | Clear drinks and fast-dissolving sticks | Diluted premix | Carrier lowers protein and peptide per gram; label changes | Customer-specific | Low-dose formats and flavour systems A tighter cut is not automatically better. More hydrolysis means more small peptides and free amino acids, which can taste less neutral, raise a drink's osmolality and reduce yield. The right cut is the one the dosage form and the sensory target can carry. ## Inside the drum The physical targets are narrow enough to test and wide enough for raw-material variation. Appearance is off-white to light tan; colour moves with species, season and dryer, and a shift inside that window is not an identity failure. Solubility is the more useful line: the powder gives a clear to slightly opalescent solution, and haze at the target concentration is a formula question. Physical targets and what they decide | Attribute | Target | What it decides | Appearance | Off-white to light tan powder | Colour consistency, not identity | Solubility | Clear to slightly opalescent in water | Clarity in sticks and drinks | Moisture | ≤7.0% | Caking and shelf life | Ash | ≤5.0% | Taste, haze and mineral load | Particle size | ≥95% through 80 mesh | Wetting, flow and dust Odour is not in the table because it is hard to certificate, but it belongs in the trial. The marine note strengthens with moisture and storage temperature. A capsule can mask it; a stick pack or a clear drink cannot. Ask for a sensory check on the lot. The 5.0% ash limit is wider than the 2.0% limit on fish collagen peptides. A sea cucumber lot near the limit can haze a clear beverage or taste saltier, and ash moves most when the raw material changes. For a clear drink, write a tighter internal target than the catalogue gate. ## In the finished product In a capsule or tablet, the powder is judged by flow, bulk density and compressibility. The 80 mesh powder fills well; a granulated form flows faster and makes less dust. Tablets usually need granulation, and the granulating liquid adds a moisture step the stability file has to cover. The hygroscopic powder also competes with the shell and the excipients for water. In a stick pack or drink mix, the questions are wetting, dissolution and taste. The 80 mesh powder wets quickly, but a high-molecular-weight shoulder can leave haze or sediment. The marine note is more exposed in a drink than in a capsule, so the flavour system has to be tested against the actual lot. A granulated form may dissolve more slowly, the wrong trade in a stick. In a gummy or chew, the powder competes with the base for water, and reducing sugars can brown with the peptide during processing and storage. That is a matrix question, not a grade question, but particle size and moisture change the answer. A bench trial at the real process temperature is the only way to see it. ## Writing the specification A specification that can be bought against names the choice, not only the product. The lines below are the minimum; each one has to be written into the purchase specification and, where it appears on the pack, into the label. - “Sea cucumber peptides; species, tissue and origin named on the certificate.” - “Protein ≥90.0% by Kjeldahl; nitrogen factor and basis printed on the COA.” - “Peptide content ≥80.0% by HPLC; method and integration cut-off named.” - “At least 80% of the mass below 3,000 Da; full distribution reported.” - “Moisture ≤7.0%; ash ≤5.0%; appearance off-white to light tan.” - “Particle size ≥95% through 80 mesh; granulated on request.” - “Heavy metals and microbiology as listed; allergen and source statements on file.” A purchase order that says “sea cucumber peptide 90%” has not chosen the species, the peptide cut, the particle size or the source. Those lines decide whether the powder works in the dosage form. ## When this is not the right material If the label needs collagen, this material is the wrong choice on the word alone. The sea cucumber specification does not set a hydroxyproline figure, so a “collagen peptides” claim needs separate characterisation. Fish collagen carries hydroxyproline at 8.0–12.0% and a named fish source, the cleaner route for a collagen claim, though the fish allergen comes too. If a clear beverage needs more ash margin, fish collagen at ≤2.0% ash is easier, or the sea cucumber specification has to be tightened. If the project needs a marine peptide that is not fish, sea cucumber is the candidate, but the allergen and cross-contact file still has to be checked. The sea cucumber versus fish collagen comparison sets out the marker and label differences. The product hub carries the catalogue ranges; the COA page explains how the protein and peptide figures are read; the MOQ page covers packs and lead time; the fish collagen product page and the collagen peptides page show the alternative. The analytical methods library explains the HPLC work, and the quality page describes the release file. ### 02.1 Sea cucumber peptides vs fish collagen: two marine peptides, one label decision URL: https://nutrition.rainwoodbio.com/products/protein-collagen/sea-cucumber-peptides/grades/sea-cucumber-peptides-vs-fish-collagen/ Reviewed: 2026-11-19 Both are marine peptide powders, and both can be sold for capsules, sticks or drink mixes. They are not the same ingredient: fish collagen peptides are specified by species, tissue and hydroxyproline, while sea cucumber peptides are specified by protein, peptide content and molecular weight distribution. The label, the allergen file and the analytical marker follow the source. In one lineBoth are marine peptide powders, but fish collagen is defined by hydroxyproline and a named fish source, while sea cucumber peptides are defined by protein, peptide content and the size distribution. ## Two marine sources, two animals Sea cucumber is an echinoderm, not a fish. The raw material is the body wall, and the species, the season and whether the animal is wild-caught or farmed all move the composition. A sea cucumber peptide is therefore a hydrolysate of a named marine invertebrate, and the certificate should name the species and the tissue rather than use the common name alone. Fish collagen comes from fish skin or fish scale, and both are by-products of the filleting or scaling line. The species and the tissue are part of the specification because they change the raw-material handling and the label wording. Skin is wet and fatty and needs defatting; scale is mineralised and needs demineralisation. Both are collagen-rich tissues, and both carry the fish allergen. “Marine” describes the origin, not the ingredient. It does not distinguish an echinoderm from a fish, and it does not tell the buyer which analytical marker to expect. The source has to be written out. ## What the two specifications measure The two specifications meet at protein ≥90.0%, but they measure different things after that. The table compares the catalogue ranges on this site. Sea cucumber peptides and fish collagen peptides · catalogue comparison | Parameter | Sea cucumber peptides | Fish collagen peptides | Source | Sea cucumber, echinoderm; body wall | Fish skin or scale; species named | Protein | ≥90.0% by Kjeldahl | ≥90.0% by Kjeldahl, N × 5.55 | Peptide content | ≥80.0% by HPLC | Not a catalogue line | Hydroxyproline | Not a catalogue line | 8.0–12.0% by HPLC | Molecular weight | ≥80% below 3,000 Da | ≥90% below 3,000 Da | Ash | ≤5.0% | ≤2.0% | Moisture | ≤7.0% | ≤7.0% | Particle size | ≥95% through 80 mesh | ≥95% through 40 mesh | Allergen | Source statement; echinoderm not named as fish, crustacean or mollusc | Fish declaration The fish collagen line includes hydroxyproline because collagen has a characteristic amount of it, and the fish source because the species is part of the label. The sea cucumber line includes peptide content and a size distribution because the product is sold as a peptide, not as collagen. Ash and particle size also differ: sea cucumber allows up to 5.0% ash and is milled to 80 mesh, while fish collagen allows 2.0% and is typically 40 mesh. Neither profile is a ranking. A buyer who compares only the protein figure will see 90.0% on both sides and miss the marker, the ash and the particle size. ## Writing each specification The specification has to be written for the material, not copied from the other one. For fish collagen, the lines are species and tissue, protein with N × 5.55, hydroxyproline 8.0–12.0% by HPLC, at least 90% below 3,000 Da, ash ≤2.0% and pH 5.0–7.0. For sea cucumber, the lines are species and tissue, protein with the nitrogen factor agreed and printed, peptide content ≥80.0%, at least 80% below 3,000 Da, ash ≤5.0% and 80 mesh powder. The nitrogen factor is a practical difference. Fish collagen uses the 5.55 factor; the sea cucumber catalogue does not print a factor, so it has to be agreed and stated on the certificate. A protein figure without its factor is not portable between the two materials. If the label says “collagen”, the file needs a collagen characterisation. Sea cucumber body wall contains collagen, but the sea cucumber specification does not set hydroxyproline, so a collagen claim needs a separate report. Fish collagen carries hydroxyproline as a release line, which is the cleaner basis for that claim. ## The allergen is not symmetrical Fish is a listed allergen in the EU, the United States and the United Kingdom, and fish collagen carries the declaration regardless of whether it comes from skin or scale. The tissue does not change the allergen. Sea cucumber is an echinoderm. It is not a fish, a crustacean or a mollusc, so the named entries in the EU Annex II list do not cover it as written. That does not make the allergen question disappear: the destination list, the customer's own policy and cross-contact on a shared marine line still have to be reviewed. A pack that says “fish-free” needs a cross-contact statement behind it, not only a source statement. Do not label sea cucumber peptides as fish collagen, and do not use “marine collagen” to blur the two. ## What the label can say The ingredient name is the shortest version of the specification. “Fish collagen peptides” is accurate for the fish material, and the species or tissue can be added when the record supports it. “Sea cucumber peptides” is accurate for the sea cucumber material; a species name can be added when the raw-material record supports it. “Marine peptides” is too vague for either. If the label claims collagen, the collagen characterisation has to be on file; if it names a species, the species record has to be on file; if it makes a protein claim, the claim conditions have to be met. The brand's regulatory reviewer confirms the wording for the destination, and the certificate does not approve a claim. A switch from one material to the other is a relabel, not a substitution. ## When to choose which Choose fish collagen when the formula or the positioning is collagen, when hydroxyproline is the marker the buyer wants, when the fish allergen is acceptable, and when the 40 mesh powder and the 2.0% ash limit fit the dosage form. Choose sea cucumber when the source story is sea cucumber, when a marine peptide that is not fish is wanted, when the 80 mesh powder and the wider ash limit fit, and when the protein, peptide and size specification is enough without a hydroxyproline marker. For a blend, declare both ingredients and both markers, and check the allergen statement against the fish share. Do not use one material to dilute the other without saying so on the label. The sea cucumber peptides product page carries the catalogue ranges; the fish collagen peptides page and the collagen peptides page show the alternative; the analytical methods library explains the HPLC work; the quality page describes the release file. The sibling pages cover the COA, the compliance file and the identity tests. ### 03 Sea cucumber peptides are hygroscopic; the pack decides the shelf life URL: https://nutrition.rainwoodbio.com/products/protein-collagen/sea-cucumber-peptides/stability/ Reviewed: 2026-11-19 Sea cucumber peptides are stable as a dry powder when the pack keeps moisture out; the practical failure modes are moisture uptake, caking, colour change and a stronger marine odour. In solution, heat, pH and oxygen act faster, and a beverage or stick pack has to be validated in its own matrix. The pack, the storage condition and the test panel decide the shelf life, not the certificate. In one lineThe powder is not the fragile part by itself: moisture, heat and the matrix decide whether a sea cucumber peptide keeps its colour, its odour and its peptide profile. ## The powder: moisture, colour and odour The catalogue sets moisture at ≤7.0%. That is a release gate, not a storage allowance. The powder is hygroscopic, and an opened pouch takes water from the air; loss on drying rises, the powder cakes, and the water activity can reach a level where mould and bacteria grow. A foil pouch that is heat-sealed is a barrier; one that has been opened and folded over is not. Transfer the remainder to a smaller opaque container, or keep it within a stated in-use period. Colour and odour move with moisture and heat. The powder is off-white to light tan; over time and at high humidity it can darken or take on a brown tone, especially in a blend that contains a reducing sugar. The marine note also strengthens with moisture and storage temperature. Neither change is visible on the certificate, and both are worth a sensory check on the retained sample. ## The solution: heat, pH and oxygen The powder dissolves in water to a clear to slightly opalescent solution. Clarity depends on concentration, pH and the peptide distribution: a high-molecular-weight shoulder or a lot near the ash limit can haze a drink that looked clear at the bench. Test at the formula pH and at the label concentration, not in water alone. Heat is the main driver in a liquid. Pasteurisation or hot fill adds a heat load that the powder never sees, and with a reducing sugar present it can brown the solution and shift the odour. Oxygen and trace metals, especially iron and copper, can darken the colour; avoid metal contact and keep dissolved oxygen low. A liquid also needs a microbial hurdle and a validated hold time before filling. A stick pack avoids most of this because the consumer adds water at the point of use. ## What drives change Factors that move sea cucumber peptides during storage | Factor | Effect | Control | Moisture | Caking, browning, microbial risk | Sealed foil pack; dry store | Heat | Faster colour and odour change | Controlled store; cool process | pH | Haze and solubility change in liquid | Trial at formula pH; buffer if needed | Oxygen | Lipid oxidation; marine odour | Low headspace; sealed pack | Reducing sugars | Maillard browning in blends | Choose excipients; control moisture | Metal ions | Colour and haze in solution | Avoid iron and copper contact These factors act together. A warm, humid store is worse than either condition alone, and a clear bottle of solution on a sunny bench combines light, oxygen and heat. The useful stability question is not “is the peptide stable?” but “stable in which pack, at which condition, for how long?” ## A stability protocol for the ingredient A useful protocol names the pack, the storage condition, the time points and the tests. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% relative humidity cover the warehouse; accelerated storage at 40 °C/75% relative humidity stresses the pack. A light-exposure arm belongs in the design when the pack is transparent. Test protein, peptide content and the molecular weight distribution at each point, because hydrolysis and aggregation can change the curve even when the powder still looks the same. Add moisture, ash, appearance, odour and microbiology. For a stick pack or a beverage, repeat the work in the matrix at the process pH and heat load. The report should show individual results and identify the pack and lot family; a pass statement alone hides the trend. ## The finished formula changes the answer In a capsule, water activity is low, but the shell and the excipients can still transfer moisture. Check loss on drying at release and after storage, and check the fill for caking. In a tablet, granulation adds water and heat, and the compressed tablet can pick up moisture from the air; a tighter moisture target may be needed than the powder specification. In a stick pack, the seal is the weak point. A pinhole or a poor crimp lets humid air in, and the powder cakes in the stick even when the bulk drum was fine. Inspect the strip as well as the powder. In a beverage, the matrix is the product: pH, heat, oxygen and clarity have to be validated together. In a gummy, the base competes for water and reducing sugars can brown the peptide; colour and odour are the first signs. An overage is a label and stability decision; it does not repair a pack that lets moisture in. The formula should be tested with the shipping pack, not with a laboratory sample bag. ## How the shelf life is set We do not publish a single shelf-life number, because the pack and the storage condition set it. The assigned retest period belongs on the specification and is supported by the stability file for that pack. A 1 kg foil pouch and a 25 kg fiber drum have different headspace, different opening histories and different surface-to-volume ratios; the data belongs to the pack that will ship. After the retest period, re-assay the retained sample before extending use. Do not extend by assumption, and do not carry a bulk figure across to a repacked container. The product hub lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the analytical methods library describes the HPLC work; the quality page describes the release workflow. ### 04 Sea cucumber peptides: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/protein-collagen/sea-cucumber-peptides/moq/ Reviewed: 2026-11-19 The MOQ for sea cucumber peptides is 1 kg, supplied as a 1 kg foil pouch; the standard bulk pack is a 25 kg fiber drum. Lead time is 1–7 days for the standard pack. A firm quotation needs six details: source and species, specification, quantity and pack, destination and Incoterm, documents, and the intended use and market. In one lineThe 1 kg pouch is the qualification unit: it can be tested, retained and traced to a lot before a 25 kg drum is committed. ## Why the minimum is 1 kg One kilogram covers a bench-scale trial, a retained sample and an independent identity test. It is small enough to ship by air, which matters when a formulator needs material before the production plan is fixed. The pack is a commercial unit with a lot code, not a scoop from a bulk drum. Below 1 kg, the material is usually split from a larger lot and repacked. That adds handling, loses the original pack identity and makes traceability harder without changing the chemistry. The 25 kg drum is the bulk unit: it reduces handling per kilogram, but it commits inventory and a longer storage period. The MOQ is a pack decision, not a volume incentive. ## Packs and formats The standard pack is a foil pouch; the bulk pack is a fiber drum with an inner liner. The powder is hygroscopic and carries a marine odour, so the barrier and the seal are part of the specification in practice. Standard sea cucumber peptide packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal or use within the in-use period | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Particle profile and lead time change | Split or repack | On request | Bench trial below 1 kg | New pack identity; document it The catalogue form is an 80 mesh powder: ≥95% through 80 mesh. Granulation is a different specification, not a packing choice. If the dosage form needs a coarser or freer-flowing powder, say so before the quotation, because the change moves the particle-size line. ## Lead time and dispatch The standard pack is quoted at 1–7 days from order confirmation. That window covers picking, document preparation and dispatch; it does not include shipping transit, customs clearance or the customer's own quality release. A custom granulation, a dilution or a non-standard pack adds time, and the quotation should state it separately. Set the dispatch date, not just the lead time. A parcel carries the 1 kg foil pouch; a pallet carries the 25 kg fiber drum. The Incoterm settles the freight booking and the customs entry. Send the COA, specification and species declaration with the lot, because a hygroscopic marine powder held at the port takes up moisture while it waits. ## What a quotation needs Six items make a quotation firm enough to compare: - Product and source. Sea cucumber peptides, with the species and tissue named. - Specification. Protein factor and basis, peptide method, molecular weight, moisture, ash, particle size, heavy metals and microbiology. - Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated variant. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, specification, SDS, allergen statement, species and origin declaration, and any market-specific statement the importer needs. - Intended use and market. Supplement, food or another use, the dosage form, and the market where it will be sold. A quotation without the source and the market is incomplete. The same powder can suit one destination and sit outside the file for another, and the paperwork is part of the offer. We do not publish commercial terms on this page; they are stated on the quotation. ## The sample is a lot, not a demonstration The 1 kg pack is the qualification sample. Test protein, peptide content and the molecular weight distribution, moisture, ash and microbiology before scaling, and keep a retained sample from the same pack. The lot code on the sample, the COA and the quotation should match. A sample that cannot be traced to a lot is a demonstration, not a qualification. If the project needs less than 1 kg for a bench trial, discuss it before ordering. A split from a bulk lot is a repack with its own traceability, not the catalogue pack, and it should be documented as such. Do not assume that a bench sample and the production drum will come from the same lot. ## Terms to settle before the first order Sea cucumber peptides are quoted against a written specification: the offer names the Incoterm, the 1 kg pouch or 25 kg fiber drum, the lead time and the documents, then the quality terms — the revision of the protein method and peptide cut-off, the lot certificate, the sample kept back, the retest window and how a source or hydrolysis change is approved. Sign the quality agreement before the first order, not after a result is disputed. The commercial terms for a return or replacement come from the quotation, and the quality agreement sets the route. If a lot fails the agreed protein, peptide or molecular-weight lines, the sample kept back and a joint re-test answer that question, not a photograph of the powder. Fix the referee laboratory and the cost-sharing before a dispute, because a marine hydrolysate argument is easier to resolve before the next drum is booked. The product hub carries the catalogue specification; the COA page lists the release tests; the compliance page covers the market files; the logistics page covers shipping and documents; the analytical methods library explains the HPLC work; the quality page describes the release workflow. ### 05 The regulatory file for sea cucumber peptides URL: https://nutrition.rainwoodbio.com/products/protein-collagen/sea-cucumber-peptides/compliance/ Reviewed: 2026-11-19 Sea cucumber peptides are a hydrolysate of a marine animal, and the regulatory file is built around four things: the species and tissue, the process, the destination market and the finished product. This page sets out the framework, the documents and the checks that belong in that file. It does not decide the route; the buyer's regulatory team confirms the route for the destination, and the supplier supplies the evidence. In one lineThe specification describes the powder; the regulatory file has to connect the species, the process, the destination and the label. ## What the file contains A complete file answers four practical questions. What is the material, and which species and tissue does the certificate name? Which lot is being released, and what does its COA report? Which market is the finished product sold in, and which route applies there? And what does the label say, including the source and any claim? The certificate answers the lot question, the technical data sheet answers the specification question, and the safety data sheet answers the handling question. None of them answers the route question on its own. Sea cucumber is not one species. Some species have a history of consumption in parts of Asia; others have been reviewed under the EU novel-food framework. The file names the species, and the route follows the species and the process, not the common name. The peptide is also not the whole animal: hydrolysis, enzymes and any carrier are part of the material, and a history of use for the whole body wall does not automatically cover the hydrolysate. ## European Union The EU route starts with Regulation (EU) 2015/2283 on novel foods. If the species or the process has no history of consumption before 15 May 1997, the route is an authorisation or, for a traditional food from a third country, a notification with the evidence of that history. The buyer's regulatory team confirms which route applies. General food law (EC) No 178/2002, hygiene rules (EC) No 852/2004, labelling under Regulation (EU) No 1169/2011 and the contaminant rules (Regulation (EU) 2023/915, as of this review) apply alongside it. The current consolidated texts are the reference, not a summary. Allergen labelling follows Annex II of Regulation (EU) No 1169/2011. Fish, crustaceans and molluscs are listed; sea cucumber is an echinoderm and is not named in those entries. That does not remove the need for a source statement, and it does not cover cross-contact with fish or shellfish on a shared line. Do not describe the material as fish or as fish collagen. As of this review, the list and the novel-food text are the ones to check; both can change. ## United States In the United States, the file is built around the exact dietary ingredient and its intended use. A dietary supplement falls under the FD&C Act and DSHEA; a new dietary ingredient needs a notification under 21 U.S.C. 350b unless a basis exists, and a food ingredient needs a GRAS basis or another route. The buyer confirms which basis covers the finished product, and the supplier supplies the species, process and composition data behind it. Current good manufacturing practice for supplements sits in 21 CFR 111, and the label and claims are reviewed under 21 CFR 101. A structure/function claim needs substantiation and the notification that goes with it; a disease claim is not available for a supplement. The ingredient name on the Supplement Facts panel should match the material in the file, not a marketing name. “Marine peptides” is not a regulatory category. ## United Kingdom Great Britain and Northern Ireland are checked separately. The GB file uses the GB register and GB labelling rules; Northern Ireland follows the EU framework. The buyer's regulatory team confirms which applies to the destination and keeps the evidence with the order. ## Contaminants and limits The contaminant panel is a finished-product calculation, not only a drum result. The table is the catalogue limit and the evidence the file should carry; the destination text and the daily dose decide the final limit. Contaminant and microbiology limits to confirm for the finished product | Parameter | Catalogue limit | What the file should show | Lead (Pb) | ≤3 mg/kg | Lot result, method and finished-product calculation | Arsenic (As) | ≤2 mg/kg | Total and inorganic arsenic, method and destination limit | Cadmium (Cd) | ≤1 mg/kg | Lot result and any category exception | Mercury (Hg) | ≤0.1 mg/kg | Lot result and method | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Counts, absence statements and method Arsenic is the line that needs a second look in a marine material. Total arsenic and inorganic arsenic are different measurements, and a certificate that reports only a total does not say which fraction was found. The file should name the method and the destination limit, and the finished-product calculation should use the use level, not the raw-material result alone. ## Claims and the label No disease-related claim belongs on the pack or in the file. In the EU, health claims are governed by Regulation (EC) No 1924/2006 and only authorised claims can be used; nutrient claims such as a protein claim have their own conditions. In the United States, a structure/function claim needs substantiation and the notification that goes with it, while a disease claim makes the product a drug. In the UK, the GB register and the EU framework apply on their own terms. Source and characterisation words are claims too. “Sea cucumber” should be supported by the species record; “collagen” needs a collagen characterisation, which the sea cucumber specification does not set; “marine” is too vague to carry the source. The brand's regulatory reviewer confirms the wording for the destination. The certificate does not approve a claim. ## Documents in the file - Specification with the version, species, tissue and process. - COA for the lot, with methods and results. - Technical data sheet and safety data sheet. - Allergen statement and cross-contact controls. - GMO statement and country of origin. - Species declaration and raw-material traceability. - Processing aid, enzyme and carrier statement. - Contaminant and microbiology results; nutritional data. - Stability summary for the pack. - Novel-food, NDI or GRAS dossier where the buyer's route needs it. ## Checklist before the first order - The species, tissue and process are named in the specification. - The destination route has been confirmed by the buyer's regulatory team. - The contaminant results are converted to the finished-product dose. - The allergen, source and cross-contact statements are on file. - The label and claim wording have been reviewed for the destination. - The specification, COA and quotation refer to the same version. The product hub carries the catalogue specification; the COA page explains the lot certificate; the identity page covers the analytical evidence; the EU regulatory note gives the framework references; the analytical methods library explains the tests; the quality page describes the release file. ### 06 How we prove a sea cucumber peptide lot is what it says URL: https://nutrition.rainwoodbio.com/products/protein-collagen/sea-cucumber-peptides/identity/ Reviewed: 2026-11-19 Identity for a sea cucumber peptide is built from four agreeing layers: the source record names the species and tissue, the protein and peptide figures show a protein hydrolysate, the molecular weight distribution shows how far hydrolysis went, and the amino acid profile gives a fingerprint. No single number proves the species, and a highly hydrolysed powder is a difficult matrix for a species test. The file is strongest when the layers point the same way. In one lineA sea cucumber peptide is identified by agreeing layers, not by one assay: the source record names the animal, the protein and peptide figures describe the hydrolysate, and the size curve shows how far hydrolysis went. ## The four identity layers The four layers answer different questions. The source layer is documentary; the other three are analytical. A certificate can name the right species and still describe a different powder, which is why the document and the measurements have to be read together. Four layers of sea cucumber peptide identity | Layer | Question | Evidence | What it proves | Source | Which species and tissue? | Species declaration, raw-material records, supplier audit | The animal, not the powder | Composition | Is it a protein hydrolysate? | Protein by Kjeldahl, peptide content by HPLC | Protein and peptide content | Size | How far was it hydrolysed? | Molecular weight distribution | Process consistency | Fingerprint | Does it look like sea cucumber? | Amino acid profile, peptide map | Consistency, not species proof Amino acid composition is a useful fingerprint because sea cucumber body wall is rich in glycine, proline and hydroxyproline, with a characteristic ratio of those residues. But the same amino acids occur in fish collagen and in gelatin, so the profile supports consistency and flags a substitution rather than proving the species. The species claim still rests on the raw-material record. ## The ratios worth calculating Three ratios are worth calculating from the certificate. The first is peptide content divided by protein: if both figures are on the same basis, the catalogue limits give 80.0 ÷ 90.0 = 0.89, so about 89% of the protein is counted as peptide. A peptide figure above the protein figure means the two methods disagree; a much lower ratio points to a large free amino acid fraction, non-protein nitrogen or a different integration cut-off. The second is nitrogen to protein. A 90.0% protein figure at N × 6.25 implies 14.4% nitrogen; at N × 5.55 it implies 16.2%. The certificate's nitrogen result and its factor have to multiply to the protein figure. If they do not, the basis or the factor is wrong. The third is ash to protein. The catalogue allows ash up to 5.0% and protein from 90.0%, so a high ash with a normal protein figure is possible, but it points to salt or a mineral carrier. Check sodium and chloride when ash sits near the limit. None of these ratios is a release limit unless the specification says so; they are consistency checks. ## What X-ray diffraction can and cannot show X-ray diffraction is a solid-state method, and a spray-dried peptide is largely amorphous. Its diffractogram is a broad halo rather than a sharp pattern, so XRD cannot identify sea cucumber peptides or distinguish them from fish collagen peptides. A supplier who offers “XRD conforms” as identity evidence has not shown much unless the reference pattern and the question are stated. XRD is still useful for two narrower questions. It can detect a crystalline diluent, such as sodium chloride, a crystalline amino acid or a mineral salt, in a powder that should be amorphous. It can also show a solid-state change after storage or granulation. Ask for the reference pattern and the detection limit before reading a “match” statement, and do not use XRD as a routine release test for this product. ## What adulteration looks like The likely substitutions are economic: a carrier that lowers the peptide per gram, a cheaper marine peptide, gelatin or another collagen, a plant protein that raises the Kjeldahl nitrogen, free amino acids, or salt. Colour and odour are weak signals because the material naturally varies; the stronger signals are the mass balance, the amino acid profile and the source record. Common sea cucumber peptide substitutions and the signals | Adulterant | What it does | Signal | Test | Maltodextrin or carrier | Lowers protein and peptide per gram | Protein and peptide low; ash normal | Mass balance, HPLC, label | Fish or other marine peptide | Cheaper marine nitrogen | Amino acid profile; source record | Profile, audit, PCR on tissue | Gelatin or bovine collagen | Raises protein and hydroxyproline | Hydroxyproline present; profile shift | Hydroxyproline, profile, PCR | Plant protein | Raises Kjeldahl nitrogen | Amino acid profile; peptide curve | Amino acid analysis | Free amino acids | Raises small-molecule nitrogen; taste | High free amino acids; low molecular weight | Amino acid analysis, HPLC | Salt or mineral carrier | Raises ash | Ash high; sodium or chloride | Ash, ICP-OES Hydroxyproline is not a fish marker on its own. Sea cucumber collagen contains hydroxyproline too, so a positive Hyp result does not prove fish collagen or gelatin; it only proves that collagen-like material is present. The species record and the full amino acid profile carry more weight than a single marker. ## Writing identity into the specification Write the identity into the specification as a set of lines, not as one word: - “Sea cucumber peptides; species, tissue and origin named.” - “Protein ≥90.0% by Kjeldahl; factor and basis printed.” - “Peptide content ≥80.0% by HPLC; method and cut-off named.” - “At least 80% of the mass below 3,000 Da; full distribution reported.” - “Amino acid profile reported; no carrier unless declared.” - “Moisture ≤7.0%; ash ≤5.0%; heavy metals and microbiology as listed.” - “Identification: protein and peptide profile conform, with chromatogram.” ## Five questions for the supplier - Which species and tissue is this lot, and which document supports the declaration? - What nitrogen factor and basis were used for the protein figure? - How is peptide content measured, and what cut-off defines a peptide? - Can you provide the full molecular weight distribution and the amino acid profile? - Will you accept a joint re-test on the retained sample if the identity is disputed? Five direct answers amount to an identity file. One assay percentage does not. The product hub carries the catalogue specification; the COA page shows where each figure sits; the grades page compares the practical options; the sea cucumber versus fish collagen comparison covers the marker question; the analytical methods library explains the HPLC work; the quality page describes the release file. ### 01 What the COA for donkey-hide gelatin peptides contains URL: https://nutrition.rainwoodbio.com/products/protein-collagen/donkey-hide-gelatin-peptides/coa/ Reviewed: 2026-11-19 The certificate for a donkey-hide gelatin peptide lot has to answer two different questions. The first is what the powder is: a collagen hydrolysate from donkey hide, with a protein figure and a peptide fraction that belong together. The second is what else is in the drum: moisture, ash, metals, microorganisms and the particle-size cut. A certificate that answers only the first leaves the buyer unable to release the lot. In one lineThe two numbers that define this powder are a Kjeldahl protein figure with its nitrogen factor and an HPLC peptide content; a certificate that shows only one of them has described half the material. ## What belongs on the sheet Each line should be traceable to a method and to an agreed limit. “Conforms” is the end of the argument, not the argument; the reader needs the measurement and its method. For this material the sheet carries four groups: identity (protein and peptide profile, species statement), composition (protein, peptide content, ash, moisture), contaminants (metals, microbiology) and physical form (mesh). The species statement is not covered by the identity row. A peptide profile can match a reference and still come from cattle hide; only the source record and a species test answer the animal question. The identity page explains why the two are separate lines. Release parameters · donkey-hide gelatin peptides | Parameter | Method | Release limit | Appearance | Visual | Off-white to light tan powder | Identification | Protein and peptide profile | Conforms to the reference | Protein | Kjeldahl, factor stated | ≥90.0% | Peptide content | HPLC distribution | ≥80.0% | Ash | Gravimetric, furnace | ≤3.0% | Moisture | Loss on drying | ≤7.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and enrichment | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh ## Two figures with different arithmetic Protein is calculated from nitrogen. The laboratory digests the sample, measures the nitrogen, and multiplies by a factor. For gelatin and collagen the factor is 5.55, because the nitrogen content of the protein is near 18%; for a generic food protein it is 6.25. The choice changes the result by about 12.6%. A certificate that omits the factor leaves the reader guessing which arithmetic was used. Moisture is the other half of the basis. The catalogue protein figure is dry-basis. A lot at 92.0% dry basis and 5.5% moisture is 86.9% as-is; the same lot is 92.0% only after the water is divided out. Specifications, labels and purchase orders should state the basis. The peptide figure comes from a separation, not from nitrogen. HPLC resolves the hydrolysate by size, and the peptide content is the fraction that falls inside the agreed cut-off. Because the cut-off and the calibration define the answer, both belong in the method line. The reader should also know whether the percentage is on the powder or on the protein; the two bases give different numbers. ## The gate and the measurement A specification value is a gate. A batch value is a measurement. When the two are printed in the same column the reader cannot tell whether the lot was tested or merely promised. Keep them apart, and keep the method next to the number. What the result column should contain · donkey-hide gelatin peptides | Parameter | Release limit | Result column | Protein | ≥90.0% (factor and basis stated) | A measured percentage with N × 5.55 and the basis | Peptide content | ≥80.0% by HPLC | The measured fraction, the cut-off and the calibration | Ash | ≤3.0% | A measured percentage | Moisture | ≤7.0% | A measured percentage | Heavy metals | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | A measured figure per element | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | A count plus the absence statement for the lot | Particle size | ≥95% through 80 mesh | The measured percentage through the sieve Microbiology needs a count and an absence statement; a single “pass” hides which organism was tested. Metals need a figure per element, because a total can sit inside the limit while one element is over it. The species line is different again: it is a declaration with a test behind it, not a numeric limit, and it should name the animal, tissue and origin. ## Where lots differ Hide is not a synthetic raw material. The animal's age and diet, the season, the liming and washing sequence and the extraction temperature all shift the composition before the hydrolysate is made. The hydrolysis step then sets the peptide curve; longer treatment shortens the chains and moves the HPLC distribution. Filtration removes the fine fraction; spray drying fixes colour, bulk density and moisture. Appearance is a coarse guide. The catalogue window runs from off-white to light tan, and a lot inside that window can still differ in odour or in the way it dissolves. A darker powder may reflect a longer dry or a sugar reaction. That is not proof of a fault, but it is worth a retained sample and a question. Ash is the process marker. The alkaline steps leave sodium salts, and a higher ash at steady protein points to washing or neutralisation rather than to the peptide. The mesh result moves with the mill, not with the chemistry. ## Outside testing An outside laboratory is useful when the buyer needs an answer the supplier's sheet does not give: a species claim on a new source, a first import into a regulated market, a disputed result. The panel should follow the question. For species, PCR on the hide or the gelatin intermediate, or marker peptides by LC-MS/MS when the DNA is degraded. For composition, hydroxyproline and the amino acid profile. For the process, the HPLC distribution with its cut-off. For safety, ICP-MS metals including chromium, and microbiology. Chromium deserves a line of its own. A hide that has passed through a tannery can carry it, and neither the protein figure nor the peptide profile will show it. Ask for the detection limit with every screen; “not detected” without a limit says more about the method than about the lot. If a result is disputed, the referee needs the retained sample, the specification and the supplier's certificate, and a test that discriminates between the possible causes. Repeating the same assay rarely settles the question. ## Reading two certificates together Line the two documents up by parameter, not by headline. Check the species and tissue, the factor and basis behind protein, the cut-off behind peptide, the hydroxyproline result, the metal panel (chromium included), the microbiology and the pack. Two sheets can both say 90% protein and describe different materials. Then look behind the sheet: the manufacturing site, the hide supply, the hydrolysis and drying record. A certificate is only as good as its link to the lot that ships. Catalogue ranges sit on the product hub; species tests on the identity page; the grade choice on the grades page; the market file on the compliance page. Method notes are collected in the methods library, and the release process is set out on the quality page. ### 02 Donkey-hide gelatin peptide grades: powder, mesh and peptide curve URL: https://nutrition.rainwoodbio.com/products/protein-collagen/donkey-hide-gelatin-peptides/grades/ Reviewed: 2026-11-19 “Donkey-hide gelatin peptides” names a family of powders, not one specification. The hydrolysis depth, the mesh, the colour and the species file vary between lots that all clear the same protein and peptide floor. The grade is the combination that fits the dosage form and the label; the protein percentage is only the entry ticket. In one lineThe grade is the peptide curve, the mesh and the species record; the 90% protein headline is the floor that every grade has to clear. ## A name, several powders Gelatin from donkey hide is extracted, dried and then hydrolysed. Stop the hydrolysis early and the powder still contains long chains: it dissolves slowly, thickens a solution and can gel at higher concentrations. Take it further and the chains shorten: the solution stays thin and clear, the powder disperses faster, and the taste can turn slightly bitter. The catalogue requires ≥90.0% protein and ≥80.0% peptide, but those are floors. Two compliant lots can sit at opposite ends of the peptide distribution. Gelatin itself is a different purchase. Bloom strength, gel time and clarity describe the intact protein; a peptide powder has no Bloom value to speak of because the network no longer forms. A formulator who needs a gelling agent should specify gelatin, and a formulator who needs a soluble powder should specify the hydrolysate. The two are not interchangeable by adjusting the dose. The species file is the third variable. Protein and peptide figures cannot distinguish donkey hide from another hide, so the source statement and the test behind it belong in the grade definition, not in a footnote. ## Specifications compared Specification choices within donkey-hide gelatin peptides | Grade | What changes | Fits | Watch | Standard peptide powder | Base hydrolysate, ≥95% through 80 mesh | Capsules, sticks, general powders | Moisture pickup, dust | Granulated | Agglomerated from the base, coarser particle | Sachets, tablets, spoonable powders | Granulation aids, dispersion time | Higher peptide fraction | Agreed ≥85% by HPLC with a stated cut-off | Clear drinks, concentrated formats | Yield, odour, bitterness | Finer molecular-weight curve | Agreed distribution, more mass below the cut-off | Clear beverages, rapid dissolution | Foam, haze, filtration load | Low-colour grade | Agreed colour, decolourised | Light drinks and gels | Process loss, colour drift These are alternative specifications, not a ladder. Each needs its own certificate language: the HPLC cut-off, the mesh, the colour window and the species statement. ## Particle size, colour and flow The standard powder passes 80 mesh almost completely, which makes it fine enough to disperse quickly and light enough to hang in the air when poured. Fine particles can also form lumps when they meet water, because the outer layer hydrates before the core wets. Granulation solves that by building larger, porous particles: the powder flows, dusts less and wets more evenly, though it takes a little longer to dissolve. Colour and smell track the hide and the drying step. The standard range is off-white to light tan. A decolourised grade exists for drinks where the powder must not tint the liquid, and it usually gives up some yield in exchange. Odour is the harder attribute to put in a specification and the easier one for a consumer to notice, particularly in an unflavoured stick. All of these powders attract water. The finer the powder, the faster the pick-up, so the pouch and the in-use period are part of the choice. ## Matching the dosage form A capsule is limited by bulk density: the fill weight decides how many capsules a dose needs. A tablet is limited by flow and compression; a granulated grade is usually easier to run than a fine one. A stick pack is limited by dispersion and foam, and a fine powder can foam when the consumer shakes it. A clear drink is limited by haze, which depends on the peptide curve, the pH and the minerals together. A gummy is limited by water activity and by the browning reaction between the peptide and reducing sugars. Trials should use the grade that will go into production, at the concentration the label will declare. Results from a finer or coarser grade do not transfer, and a certificate cannot predict them. ## Writing the line items - “Hydrolysed gelatin peptides, donkey hide (Equus asinus); species, tissue and origin declared.” - “Protein ≥90.0% by Kjeldahl, N × 5.55, dry basis.” - “Peptide content ≥80.0% by HPLC; the cut-off and calibration are named.” - “Ash ≤3.0%; moisture ≤7.0%.” - “≥95% through 80 mesh, or the granulated equivalent agreed in writing.” - “Species record on file; PCR available on request.” These lines give a second laboratory enough to reproduce the decision. A specification that stops at the protein range does not. ## When the standard powder is the right buy Most capsules and flavoured powders do not need a special grade. The standard 80 mesh powder disperses, mixes and fills adequately, and it carries the fullest documentation. A finer or decolourised grade is justified when the format has a real constraint: a clear drink, a high-concentration stick or a colour-sensitive gel. Granulation earns its place only when flow or dust is the problem. A gelling application needs gelatin, not a peptide. And if the label will carry the word “ejiao”, the species record and the market file must support it; another species' collagen cannot stand in. The Ejiao versus collagen comparison covers that choice. The ranges are on the product page; the analytical lines are on the COA page; the identity tests are on the identity page; the market file is on the compliance page. Method notes are in the methods library, and the release process is on the quality page. ### 02.1 Ejiao peptides or collagen peptides: what actually differs URL: https://nutrition.rainwoodbio.com/products/protein-collagen/donkey-hide-gelatin-peptides/grades/ejiao-peptides-vs-collagen-peptides/ Reviewed: 2026-11-19 Ejiao peptides and collagen peptides are both hydrolysed collagen, and their amino acid logic is the same. What differs is the species behind the hide, the documentation that proves it and the name the label carries. A buyer comparing the two is choosing a source and a file, not a protein percentage. In one lineEjiao peptides and collagen peptides are the same collagen chemistry from different species, so the label, the species file and the market route separate them, not the protein percentage. ## One process, two sources Gelatin is the protein left after collagen has been denatured and extracted; hydrolysis then cuts it into peptides. Donkey-hide gelatin is made from the hide of the donkey (Equus asinus). The collagen peptide of commerce is usually bovine hide or bone, porcine skin, or fish skin and scales, and each of those is a different label ingredient with its own file. Both materials are rich in glycine, proline and hydroxyproline, both are essentially free of tryptophan, both are calculated with N × 5.55 and both are amorphous powders. That similarity is the point: the analytical numbers overlap, so the species record is what separates them. The term “collagen peptides” names a family and often leaves the species to a separate statement; “ejiao” names the material and the animal together. ## The two materials side by side Ejiao peptides against typical collagen peptides | Property | Ejiao peptides | Collagen peptides (typical) | Source species | Donkey, Equus asinus | Bovine, porcine or fish | Tissue | Hide | Hide, bone, skin or scales | Protein and peptide | ≥90.0% and ≥80.0% (catalogue) | Agreed; often ≥90.0% and ≥80.0% | Hydroxyproline | Collagen marker present | Collagen marker present | Allergen | No major allergen from the hide; animal-derived | Fish declared where the source is fish | Label name | Donkey-hide gelatin peptides; ejiao peptides | Collagen peptides, species named separately | Documentation | Species, origin and hide source; PCR | Species and tissue; TSE file where bovine ## Why the numbers do not decide it A Kjeldahl result on either material is multiplied by 5.55, hydroxyproline is present in both, and hydrolysis, not species, decides the peptide curve. A certificate showing 92.0% protein and 80.0% peptide could describe either powder. The difference that does show up is ash: a hide hydrolysate is low in mineral, while a bone hydrolysate carries more, and a high ash figure points at the tissue rather than the species. Because the numbers overlap, a specification for one material is not a specification for the other. Writing “collagen peptides, protein ≥90%” does not buy ejiao peptides; the species line and the source record do. The arithmetic of the peptide fraction is identical on both sides, so the buyer who wants to compare them has to compare documents, not percentages. ## What the label has to say The label has to name the source. “Collagen peptides” is not a synonym for “ejiao peptides”, and a generic collagen peptide from another species cannot carry the ejiao name. In the EU ingredient list the name must be specific enough for the consumer to know what is in the product; in the US Supplement Facts panel the dietary ingredient is declared by its common or usual name; in China the label follows the applicable food standard. The brand's regulatory reviewer confirms the wording for the destination. If the brand wants the ejiao name, the species evidence and the destination file have to support it before the artwork is approved. If the brand wants a generic collagen claim, it should buy a material whose species and file match that label. The two decisions are made together, not after the packaging is printed. ## The market route follows the source Three frameworks are checked before a launch. In the EU, the novel-food status of the exact material, the food-of-animal-origin hygiene rules and the labelling rules apply. In the US, the dietary-ingredient basis and the label rules apply. In China, the food standard and the labelling standard apply. The buyer's regulatory team confirms the route for the destination; a long food record for the gelatin in one market is evidence to discuss, not a pass that travels with the powder. Nothing on this page asserts that either material is authorised in a named market as of this review. ## When to choose which Choose ejiao peptides when the label and the brand call for that material, the species documentation is available and the destination route covers it. Choose a collagen peptide when a generic collagen label and a broader supply base fit the product. Choose fish collagen when the fish source is wanted, accepting the fish allergen declaration that comes with it. Changing material means a new specification, new artwork and a fresh market check; it is not something to settle at the weighing bench. The donkey-hide gelatin peptide hub carries the catalogue range; the collagen peptide hub and the fish collagen hub carry the comparison materials. The analytical methods are described in the methods library, and the release and retained-sample workflow is on the quality page. ### 03 Donkey-hide gelatin peptides: moisture, heat and the pack URL: https://nutrition.rainwoodbio.com/products/protein-collagen/donkey-hide-gelatin-peptides/stability/ Reviewed: 2026-11-19 A peptide powder fails in storage differently from a solution. The powder cakes, darkens and loses flow; the solution hazes, changes taste and can support microbial growth. Water drives both, and the pack is the barrier the buyer controls. The shelf life belongs to the pack and the storage condition, not to the powder in the abstract. In one lineThe powder is hygroscopic and the peptide is heat-sensitive, so the seal and the storage condition decide the shelf life before any number does. ## The powder: moisture, caking and colour At release the powder carries no more than 7.0% moisture. That limit is checked at the factory, not maintained in a warehouse. Once the foil is opened, the peptide draws water from the air, the particles stick together and the powder stops flowing. The as-is protein figure falls as the water content rises, even though the dry matter has not changed. A dry store, a closed pouch and an opaque pack are therefore practical parts of the specification. Warmth makes the pick-up faster. A sealed pouch in a normal warehouse is usually fine; a loading bay in summer, a car boot or a roof space is not. After cold storage, let the pack reach room temperature before opening, or condensation will form on the powder. A desiccant can buy time in a humid climate, but it does not replace a sealed pack. Colour is the visible consequence. The off-white to light tan window can drift darker with moisture and heat, and the change is quicker in a blend that contains a reducing sugar or a fruit powder. A darker shade is not automatically a failure, but it should prompt a moisture check and a look at the storage record. ## The solution: the least stable format The peptide dissolves in water and gives a clear to slightly turbid liquid. In that liquid, heat, pH, oxygen and microorganisms act together, and a protein solution is a good medium for microbial growth. A ready-to-drink line adds heat through pasteurisation or hot fill, while a stick pack leaves the water addition to the consumer and avoids that step. Where a liquid is unavoidable, keep it dark, control the pH, limit dissolved oxygen and validate the hold time before filling. The preservative system has to be challenged in the finished matrix, not in water alone. Bulk data does not transfer: the matrix, the process and the pack each set a rate, and a drink's shelf life can only be measured on the drink. ## What drives degradation Storage factors for donkey-hide gelatin peptides | Factor | What it does | Control | Moisture | Caking, lower as-is protein, colour drift | Sealed pouch, dry store, desiccant | Heat | Accelerates moisture damage and colour change | Controlled store, cool process | Oxygen | Oxidation at exposed surfaces and in solution | Low headspace, sealed pack | Light | Colour change and odour development | Opaque or foil pack, dark store | pH | Haze, hydrolysis and taste change in solution | Validate the matrix pH; buffer if needed | Microorganisms | Growth in a protein solution | Process control, preservative, hold-time limit None of these acts alone. A warm, damp store is worse than heat or humidity by itself, and a clear bottle of neutral solution combines light, oxygen and microbial risk. The useful question is therefore specific: which pack, which condition, which duration? ## A stability protocol for the ingredient A protocol should name the pack, the condition, the time points and the tests. Model the warehouse with long-term conditions at 25 °C/60% RH and intermediate conditions at 30 °C/65% RH; stress the pack at 40 °C/75% RH. Add a light-exposure arm, because a dark incubator cannot see the colour and odour route. At each point, test protein, peptide content, moisture, appearance, microbiology and the peptide distribution. Report the individual results instead of a pass statement, and identify the pack and the lot family. The data should belong to the pack that will be sold: a 1 kg pouch and a 25 kg drum differ in headspace, surface area and how often they are opened. ## The finished formula changes the answer Capsules and tablets run at low water activity, yet the shell and the excipients can still pass moisture into the fill; check the fill at release and again after storage. In a stick pack the seal is the weak point: a pinhole will not show in the powder, so the strip needs its own inspection. A beverage combines pH, heat, oxygen and light, and a clear drink must also stay clear. Haze can appear as the pH moves toward the isoelectric region of the peptide, and an overage will not remove it. A gummy or a chew adds reducing sugars and higher water activity, and the browning reaction between sugar and peptide is a formulation issue before it is a storage issue. An overage is a label and stability decision; it does not fix a pack that lets water in. ## How the shelf life is set This material has no single shelf-life number: the pack and the storage condition define it. The retest period on the specification is drawn from stability data generated on that pack. A figure that names no pack, no storage condition and no test panel is a claim, not a shelf life. At the end of the retest period, test the retained sample again before extending use. Do not assume an extension, and do not carry a drum's figure over to a container that has been repacked. Standard packs are listed on the product hub; release testing on the COA page; pack sizes and lead time on the MOQ page. Assay notes are in the methods library, and the quality page sets out how release and retention work. ### 04 Donkey-hide gelatin peptides: MOQ, packs and ordering URL: https://nutrition.rainwoodbio.com/products/protein-collagen/donkey-hide-gelatin-peptides/moq/ Reviewed: 2026-11-19 The order minimum for donkey-hide gelatin peptides is 1 kg, supplied in a 1 kg foil pouch. The bulk unit is a 25 kg fiber drum, and a standard lead time of 1–7 days applies. The minimum is not a sales threshold: 1 kg is the smallest pack that can carry its own lot code, certificate and retained sample. A quotation needs the species, specification, pack, destination, documents and intended market. In one lineA 1 kg pouch is the smallest unit that carries its own lot code, certificate and retained sample, so that is where the minimum order sits. ## Why the minimum is 1 kg The 1 kg pouch is enough for a bench trial, a retained sample and an outside identity test. It also ships as a parcel, which helps when material is needed before the production plan is settled. Because the pouch is filled and labelled as a lot, the sample and the trial material share a traceable identity. A smaller quantity is normally taken from a larger lot and repacked. That extra handling breaks the link to the original pack and complicates species traceability, while changing nothing about the chemistry. The 25 kg drum lowers handling per kilogram, but it also commits stock and extends the storage period for a hygroscopic powder. The minimum follows the pack, not a sales target. ## Packs and formats Standard donkey-hide gelatin peptide packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture and light barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Particle profile changes; granulation aids declared | Split sample | On request | Bench trial | A repack with its own traceability The catalogue form is an 80 mesh powder: ≥95% through 80 mesh. Granulation is a separate specification rather than a packing option. If a coarser or freer-flowing powder is needed, raise it before the quotation, because the particle-size line and possibly the lead time will change. ## Lead time and dispatch The standard pack has a 1–7 day lead time from confirmation. The window covers picking, document preparation and handover to the carrier. Transit, customs clearance and the customer's own quality release are outside it. A custom granulation or a non-standard pack takes longer, and the extra time should appear as a separate line on the quotation. Confirm the dispatch date as well as the lead time. A drum moves on a pallet and a pouch as a parcel; the delivery term sets who arranges freight and who handles import clearance. The lot documents should be ready when the goods are, not sent afterwards. ## What a quotation needs Six details make an offer comparable: - Material and species. Donkey-hide gelatin peptides, with the species and tissue written out. - Specification. Protein factor and basis, peptide HPLC cut-off, ash, moisture, mesh and the contaminant panel. - Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated variant. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, specification, TDS, SDS, species and origin statement, allergen statement and any market-specific declaration. - Intended use and market. Supplement, food or another use, and the country of sale. An offer that leaves out the species or the market cannot be checked against the destination file. Commercial terms belong on the quotation; this page does not carry them. ## The sample is a lot, not a demonstration The 1 kg pouch is also the qualification pack. Test identity, protein, peptide content, moisture and microbiology before scaling, and keep part of the same pack as the retained sample. The lot code should agree across the sample, the COA and the quotation. A sample with no lot behind it cannot support a qualification. If less than 1 kg is needed for a bench trial, ask before ordering. A bench quantity taken from a bulk lot is a documented repack, not the catalogue pack, and it may not share the production drum's lot. ## Terms to settle before the first order Commercial terms, Incoterm, pack, lead time and documents sit on the quotation. The quality terms should sit beside them: the specification revision, a certificate for each lot, the retained sample, the retest interval and how changes are controlled. Negotiating a quality agreement before the first production order is easier than doing it after a dispute. Returns and replacements should follow that agreement. If a lot fails the agreed specification, the retained sample and a joint re-test are the evidence, not a photograph of the powder. Agree in advance how a referee test is paid for and which laboratory both sides accept. For the catalogue ranges see the product hub; for the release tests, the COA page; for the market files, the compliance page. The methods library holds the assay notes, and the quality page explains how a lot is released and retained. ### 05 The regulatory file for donkey-hide gelatin peptides URL: https://nutrition.rainwoodbio.com/products/protein-collagen/donkey-hide-gelatin-peptides/compliance/ Reviewed: 2026-11-19 For this peptide, provenance carries as much of the compliance file as the composition does. What has to be documented is the animal, the hide, the site and the market where the finished product will be sold. The buyer's regulatory team confirms the route for the destination, and this page lists what should be in the file. In one lineThe species, the hide as a raw material and the destination route are the three questions the regulatory file has to answer; the certificate answers none of them alone. ## Three axes of the file The file has three axes. The material axis fixes the species, the tissue and the specification version. The lot axis fixes which batch is released and what its certificate measured. The market axis fixes the permission route, the contaminant limits and the label. Suppliers can answer the first two; the third belongs to the buyer's regulatory team, who confirm it before the launch rather than after the artwork. The product category is part of the market axis. A supplement use follows the supplement rules; a food or beverage use follows the general food rules. The ingredient evidence is much the same in both cases, but the label requirements are not. ## European Union Four instruments frame the EU review: general food law (Regulation (EC) No 178/2002), food information to consumers (Regulation (EU) No 1169/2011), the contaminant regulation (Regulation (EU) 2023/915) and the novel-food regulation (Regulation (EU) 2015/2283). The novel-food point is the one to check rather than assume. The material, the process and the destination are specific, and a food history in another market is not a decision for the EU. Nothing on this page is an authorisation statement. Animal origin adds its own set. The hygiene rules for food of animal origin (Regulation (EC) No 853/2004) cover gelatin production, and the by-product rules (Regulation (EC) No 1069/2009 with Regulation (EU) No 142/2011) cover the raw material. An EU import of gelatin generally needs the establishment reference and a health certificate with the consignment. The TSE regulation (Regulation (EC) No 999/2001) is built around ruminant species, so its bovine risk-material categories do not map directly onto a donkey hide; the species, origin and site controls still have to be documented. Great Britain keeps its own register and labelling rules, while Northern Ireland follows the EU list. ## United States In the US, a supplement use is reviewed against the dietary-ingredient framework under DSHEA. Facility and label obligations sit in 21 CFR 111 and 21 CFR 101, and a new dietary ingredient notification, if one is relied on, is specific to the ingredient and its identity; the buyer's regulatory team confirms that the basis covers this material and this use. A food use brings the preventive-controls and foreign-supplier-verification rules instead. The source is donkey hide. It is not among the major food allergens in the US or on the EU Annex II list, and no fish or milk declaration follows from it. It is animal-derived and not vegetarian, which is a consumer statement and, in some markets, a religious-certification question rather than an allergen. ## Contaminants and limits The catalogue limits are the supplier's gate; the finished-product calculation is the legal one. The table pairs the two so the file can show both. Contaminant and microbiology limits to check for the finished product | Parameter | Catalogue limit | What the file should show | Lead (Pb) | ≤3 mg/kg | Lot result, method and the dose-based calculation | Arsenic (As) | ≤2 mg/kg | The agreed limit and method; no harmonised EU limit for supplements | Cadmium (Cd) | ≤1 mg/kg | Lot result and any category exception that applies | Mercury (Hg) | ≤0.1 mg/kg | Lot result and method | Chromium (Cr) | Not in the catalogue panel | A result when the hide source is new or the chain is unclear | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | The count and the absence statement for the lot Chromium is the line that belongs to this material rather than to the category. A hide that has passed through a tannery can carry it, and no protein or peptide test will reveal it. As of this review the EU sets lead, cadmium and mercury for food supplements in Regulation (EU) 2023/915; arsenic is not harmonised, so the 2 mg/kg figure is contractual. Safety is the legal baseline, and the specification is how the lot demonstrates it. ## Label and claims No label statement may claim to manage, reverse or avoid a medical condition. The permitted space is composition and, where a claim is authorised, a health claim from the EU list under Regulation (EC) No 1924/2006 or a US structure/function statement with the DSHEA disclaimer. A protein claim belongs to the finished product and its nutrient calculation, not to the ingredient. “Ejiao” is a name, and naming is not claiming. The name and the claim are separate reviews. A label that says “collagen peptides” over donkey-hide material has a naming problem before it has a claims problem. The identity page sets out the evidence behind the species line. ## The document pack Documents collected for a donkey-hide gelatin peptide lot | Document | What the file uses it for | Specification | Species and tissue, protein factor and basis, peptide cut-off, mesh, contaminants | COA | Lot results against the specification, with methods | TDS | Handling, solubility, storage and pack | SDS | Hazard classification for transport and handling | Species and tissue statement | Donkey (Equus asinus), hide, origin | Origin statement | Country of origin and manufacturing site | Allergen statement | Source declared; no major allergen from the hide | Species declaration | Equine material, origin and site controls; not a bovine TSE file | Halal or kosher certificate | Site and process specific, where the market asks Consignment documents should be filed with the lot, not kept only in the product brochure. ## Checklist before the first order - The specification version, species and tissue are written out. - COA, TDS, SDS, species, origin and allergen statements are on file. - The animal-origin route and, where relevant, the health certificate are confirmed. - Contaminants are recalculated at the finished-product dose, chromium included for a new source. - The label name and the claim have been reviewed for the destination. - Source, process and pack sit under change control. The catalogue specification is on the product hub; the lot tests are on the COA page; the analytical evidence is on the identity page. The quality page covers release documentation, the methods library holds the assay notes, and the EU, US and UK notes set out the market framework. ### 06 How to prove a lot is donkey-hide gelatin peptide URL: https://nutrition.rainwoodbio.com/products/protein-collagen/donkey-hide-gelatin-peptides/identity/ Reviewed: 2026-11-19 The easy part of identity here is showing collagen. Hydroxyproline, glycine and a peptide distribution will do that. The difficult part is showing that the collagen came from a donkey, and no protein figure can answer it. The file therefore needs one layer for the material and another for the animal, and both should be read before a lot is accepted. In one lineProtein and peptide figures show a collagen hydrolysate; only a species record and a DNA or marker-peptide test show that the hide came from a donkey. ## The five identity layers A named material on a certificate remains a claim until a test supports it. Each layer below asks something different, and an answer to the first alone describes paperwork, not powder. Five layers of donkey-hide gelatin peptide identity | Layer | Question | Test | What it proves | Document | Is the species and tissue named? | Name, species, tissue, origin | Paperwork only | Species | Is the hide from a donkey? | Species-specific PCR; LC-MS/MS marker peptides | The animal | Composition | Is the nitrogen collagenous? | Kjeldahl, hydroxyproline, amino acid profile | Collagen, not species | Peptide | How far was it hydrolysed? | HPLC distribution, cut-off stated | The process | Mass balance | Is it diluted or salted? | Protein, peptide, ash and moisture together | Consistency of the numbers ## The ratios that carry the argument Hydroxyproline is the amino acid that separates collagen from other proteins. Plant and milk proteins do not contain it in quantity, so a meaningful result is the first sign that the nitrogen is collagenous. The ratio to the protein figure says more than the number alone: a lot with high protein and low hydroxyproline is carrying nitrogen from somewhere else. Collagen also has a distinctive pattern — glycine near one third of residues, proline and hydroxyproline together near one fifth, tryptophan effectively absent — and a profile that shows tryptophan has non-collagen protein in it. The peptide-to-protein ratio is a process signature. A deep hydrolysate has most of its mass in short chains; a mild one keeps a long fraction that appears as a shoulder in the HPLC curve. Ask for the cut-off and the calibration with the percentage, because a peptide figure without them is not comparable between laboratories. Ask also whether the figure is on the powder or on the protein: at 92.0% protein, 80% of the protein is 73.6% of the powder. No combination of these ratios separates donkey from cattle. Collagen from both animals has the same amino acid logic, which is why the species test stands apart as its own layer. ## X-ray diffraction: what it can and cannot show X-ray diffraction is sometimes proposed as an identity test, but for this material it answers a narrow question. The peptide is amorphous, so the pattern is a broad halo carrying no species information. What the method can reveal is a crystalline contaminant or diluent — a salt, a sugar, a mineral — as sharp peaks against that halo. If a supplier claims a reference match, ask to see the reference and the detection limit. The technique is not a release test and does not measure protein, peptide or counter-ion. It is worth ordering when the solid form is in doubt, not when the animal is in doubt. ## What adulteration looks like Substitution routes for donkey-hide gelatin peptides | Adulterant | What moves | Signal | Test | Gelatin from cattle, horse or pig | Amino acids stay collagen-like | Species statement unsupported | Species PCR, LC-MS/MS marker peptides | Non-collagen protein | Protein up, hydroxyproline down | Tryptophan present | Amino acid profile | Free glycine or amino acids | Protein up, peptide content down | Distribution shifts to small molecules | HPLC distribution, amino acid profile | Maltodextrin or starch | Protein and peptide down | Mass balance does not close | Carbohydrate, mass balance | Tanned hide residue | Chromium up | Nothing on a protein certificate | ICP-MS chromium The likeliest substitution is another gelatin, because cattle, horse and pig hide all yield a hydrolysate with the same amino acids and a similar peptide curve. Species PCR is the direct test, but hydrolysis fragments DNA; a negative result on the finished peptide is weaker than a positive one, so the raw hide or the gelatin intermediate is the better sample. Horse and donkey are both equids, and the assay has to be validated to tell them apart. Non-collagen protein is the other common route. Whey, soy or pea protein raises the nitrogen figure while diluting the hydroxyproline, and the amino acid profile exposes it. Added free glycine raises Kjeldahl without raising the peptide fraction, and maltodextrin dilutes both protein and peptide while leaving the mass balance short. ## How to write the identity into the specification - “Hydrolysed gelatin peptides from donkey hide (Equus asinus); species, tissue and origin declared.” - “Protein: ≥90.0%, Kjeldahl, factor 5.55, dry basis.” - “Peptide content: ≥80.0% by HPLC, cut-off and calibration stated.” - “Hydroxyproline reported with the method and the ratio to protein.” - “Ash ≤3.0%; moisture ≤7.0%; ≥95% through 80 mesh.” - “Species declaration per source; PCR on request.” - “Chromium by ICP-MS for a new hide source.” ## Questions to put in writing - Which species and tissue is this lot, and where was the hide sourced? - What is the hydroxyproline result, and what is its ratio to the protein figure? - What cut-off and calibration sit behind the peptide percentage, and is it expressed on the powder or on the protein? - Which species test was run, on which sample, and can it distinguish horse from donkey? - What is the chromium result, and will you accept a joint re-test on the retained sample if the species is disputed? Five written answers build an identity file; one assay percentage cannot. Catalogue ranges are on the product hub, the certificate layout on the COA page, the specification options on the grades page and the label consequences on the Ejiao versus collagen page. Assay notes are in the methods library, and the quality page covers the retained sample. ### 01 What the COA for elastin peptides actually contains URL: https://nutrition.rainwoodbio.com/products/protein-collagen/elastin-peptides/coa/ Reviewed: 2026-11-19 An elastin peptide certificate carries three figures that are often read as one: protein by Kjeldahl, peptide content by HPLC and the desmosine crosslink that marks elastin. Around them sit ash, moisture, heavy metals, microbiology and particle size. The figures below are the gates the catalogue sets; the batch COA reports what a particular lot measured. In one lineThe protein figure, the peptide content and the desmosine marker answer three separate questions, and no one of them identifies an elastin peptide on its own. ## The lines on the sheet Each line has to carry its method. A protein percentage without the nitrogen factor, a peptide content without the chromatographic mode and a desmosine result without its hydrolysis and detection cannot be compared between suppliers. The table lists the gates; it does not report a lot. COA parameter list · elastin peptides, catalogue specification | Test | Method | Acceptance boundary | Appearance | Visual | Off-white to light tan powder | Protein | Kjeldahl, nitrogen factor stated | ≥90.0% | Peptide content | HPLC, mode stated | ≥80.0% | Desmosine | HPLC or LC-MS/MS after hydrolysis | Reported; basis stated | Ash | Gravimetric, furnace | ≤5.0% | Moisture | Gravimetric, 105 °C | ≤7.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh The protein line says how much nitrogenous material is present; the peptide line says how much of it is in peptide form. Neither proves elastin. The desmosine line does, and it is the one most often missing from a copied certificate. ## Protein, peptide and the factor between them Kjeldahl measures nitrogen, not protein, and the nitrogen is multiplied by a convention. The general food-protein factor is 6.25; collagen uses 5.55 because its nitrogen content is higher. The factor for an elastin peptide must be stated, because the same nitrogen result becomes a different protein percentage under each convention: 14.4% nitrogen reads 90.0% at N × 6.25 and 79.9% at N × 5.55. The basis deserves the same attention as the factor. Take a lot at the 7.0% moisture limit: a 90.0% dry result is only about 83.7% once the water is counted back in, and that is the figure a formulation works with. Name both the factor and the basis in the same row. Peptide content is a separate measurement. The catalogue requires ≥80.0% by HPLC, and the method should say whether the result is a size-exclusion fraction, a peak-area sum or a nitrogen-based calculation. A protein result of 90% and a peptide result of 80% are not in conflict: the gap can be free amino acids, ash, moisture and non-peptide nitrogen. The desmosine line needs its own detail. Desmosine and isodesmosine are pyridinium crosslinks formed from lysine and survive the acid hydrolysis used to release amino acids. The laboratory separates them by HPLC at 275 nm or LC-MS/MS and reports against protein or amino acid residues. Fish elastin carries less desmosine than mammalian elastin, so a figure is meaningful within a declared source, not as a universal pass mark. ## Release limit and lot result The limit is the boundary; the result is the measurement. Each needs its own column and its method. A result that echoes the range says nothing about the lot. Reading the result column against the limit | Test | Boundary | What the result must show | Protein | ≥90.0% with factor and basis | A measured percentage, the factor used and the basis | Peptide content | ≥80.0% by HPLC | The measured percentage and the HPLC mode | Desmosine | Reported | A result per gram of protein or per 1,000 residues, with the method | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot | Particle size | ≥95% through 80 mesh | The measured percentage through the sieve “Conforms” is a conclusion, and the reader should be able to reach it from the numbers. Microbiology needs a count and an absence statement; metals need one figure per element rather than a combined total. Ash is the quiet line: at up to 5.0% it can carry weight that is not protein. ## What moves between lots The raw material moves first. Elastin is purified from an elastin-rich tissue, and its amount depends on the species, the tissue, the age of the animal and the season. Where a plant runs several tissues, the desmosine level and the amino acid pattern move with the blend, even if the hydrolysis programme stays the same. Hydrolysis comes next. How far the chains are cut depends on time, temperature and enzyme dose, and that in turn sets the peptide content and the size distribution. Drying fixes the moisture, the colour and part of the flow behaviour; neutralisation and washing decide the ash. Read the sequence, not one number: protein easing down over three lots, peptide content slipping, ash rising, or a desmosine figure that no longer fits the source is a stronger signal than a single result near a limit. Pouch, drum and retained sample should carry the same code. ## When to send a sample out An outside laboratory earns its fee when the source is new, when a regulated market is being entered for the first time, when the label says elastin but the certificate stops at protein, when a blend is suspected, or when two laboratories disagree. The useful panel is the amino acid composition, desmosine and isodesmosine, the peptide distribution, ICP-MS for the heavy-metal panel and microbiology on the same sample. The amino acid composition is the practical blend test. Elastin is rich in glycine, alanine, proline and valine and low in polar residues; collagen carries hydroxyproline and hydroxylysine, which elastin does not. A hydroxyproline figure beside a low desmosine figure points to collagen or gelatin in the drum. Species identification is better done by PCR on the raw tissue than on the finished hydrolysate, where the DNA may no longer be amplifiable. Every screen should come with its detection limit; otherwise “not detected” describes the reach of the method, not the lot. Chain of custody matters. The laboratory should test the retained sample and quote the lot number in its report. ## Six lines to compare The comparison needs six items: the species and tissue; the protein result with its factor and basis; the peptide content with its HPLC mode; the desmosine result with its method and basis; ash, moisture and particle size; and the allergen, TSE and origin statements. Behind the certificate is a batch record: who ran the lot, which raw batch fed it, how it was hydrolysed and dried, and which sample was retained. The catalogue ranges are on the elastin peptides product page; the tests that support the desmosine line are on the identity page; the analytical methods are set out in the methods library; the quality page sets out the release route. ### 02 Elastin peptide grades: hydrolysis, source and form URL: https://nutrition.rainwoodbio.com/products/protein-collagen/elastin-peptides/grades/ Reviewed: 2026-11-19 Elastin is sold as an insoluble native powder and as a water-soluble hydrolysate, and a supplement formula needs the hydrolysate. Within the hydrolysate, the grade is set by the degree of hydrolysis, the tissue source and the particle form. The protein percentage on the first quotation says little about any of the three. In one lineAn elastin peptide grade is defined by how far the protein was hydrolysed and where it came from, not by the protein figure on the first page. ## Why one label covers several powders Elastin in tissue is an insoluble, crosslinked network. Desmosine and isodesmosine tie the chains together, and that structure is what gives the protein its elastic behaviour. The same crosslinks make native elastin poor material for a capsule or a drink: it does not dissolve, and it is not the material a capsule or a drink is built from. Hydrolysis cuts the network into water-soluble chains, and the degree of hydrolysis decides how small those chains become. The starting tissue matters as much as the hydrolysis. Elastin is purified from elastin-rich connective tissue, and the source can be a mammalian ligament or aorta, or fish tissue. Each source brings its own desmosine level, amino acid profile, odour, allergen position and documentation. A fish elastin and a bovine elastin are not interchangeable on a label, even when both meet the same protein range. So the grade is a combination of three decisions: how far the protein is hydrolysed, which tissue it came from, and how the powder is finished. A specification that names only “elastin peptides ≥90% protein” has left all three open. ## The grades side by side Elastin grades · what changes | Grade | What it is | Fits | Watch | Native elastin | Insoluble, crosslinked powder | Not a drink or capsule ingredient | Does not dissolve; separate specification | Standard hydrolysate, 80 mesh | ≥90% protein, ≥80% peptide | Capsules, sticks, tablets | Hygroscopic; dust | Granulated hydrolysate | Agglomerated on request | Sachets and tableting | Granulation aids; dispersion time | Tighter peptide or ash limit | Agreed peptide and ash range | Taste-sensitive and clear formats | Yield; lead time | Fish-source hydrolysate | Elastin from fish tissue | Marine positioning | Fish allergen; lower desmosine | Bovine-source hydrolysate | Elastin from ligament or aorta | Neutral odour; established supply | TSE/BSE file The rows are specification choices, not a ranking. Each one is a separate purchase with its own certificate, and the marker lines travel with it: protein, peptide content and desmosine. ## What changes in the drum Particle size is the first physical decision. The catalogue cut is ≥95% through 80 mesh, which is finer than the 40 mesh common for collagen peptides. A finer powder wets faster and disperses more evenly in a stick pack, but it also makes more dust and picks up moisture faster from the air. Granulation trades some of that dispersion speed for flow and a lower dust level, which matters on a sachet line or a tablet press. Bulk density decides how much powder fits in a capsule and how a blend behaves in a hopper. Colour runs from off-white to light tan, and a tan shift can come from the raw tissue or from the drying step rather than from a specification failure. Solubility is good: the powder dissolves in water to a clear to slightly turbid solution. The turbidity is a function of the peptide distribution, so a “clear” claim should be checked in the real matrix at the real concentration. Hygroscopicity is the property that follows every grade. The powder takes up moisture once the pouch is open, and the as-is protein figure falls as the moisture rises. The pack and the storage condition belong in the grade decision, not only in the warehouse procedure. ## What changes in the finished product Capsules are limited by bulk density and by how much powder one fill can hold. Tablets need flow and compressibility, and a granulated grade is often the practical way to feed a press. Sticks and drink mixes are judged on dispersion, taste and fill weight: a fine powder wets quickly but may foam, while a granulated one is slower to wet. The peptide content is the bridge between the label and the weigh-up. If a formula is built on peptide mass rather than powder mass, 500 mg of peptide at 80.0% content needs 625 mg of powder. That arithmetic is not a dose recommendation; it is the conversion that keeps the label and the batch record consistent. For a clear beverage, haze and heat load decide. A finer peptide distribution gives a clearer solution, but the heat of a pasteurisation step can change the colour and the odour of the finished drink. The grade trial belongs in the matrix, at the process conditions, not in water alone. ## What to put in the specification - “Hydrolysed elastin peptides; species and tissue named on the certificate.” - “Protein ≥90.0% by Kjeldahl; nitrogen factor and basis stated.” - “Peptide content ≥80.0% by HPLC; chromatographic mode stated.” - “Desmosine reported, with method and basis.” - “Ash ≤5.0%; moisture ≤7.0%; particle size ≥95% through 80 mesh.” - “Granulation aids declared where the grade is granulated.” - “Allergen statement for fish material; TSE/BSE statement for bovine material.” That list gives the laboratory something to test against and gives the buyer something to compare. A specification that names only the protein range leaves the source, the peptide content and the marker open, and those are the three lines that separate one elastin peptide from another. ## When a standard grade is enough Where elastin is one of several ingredients in a capsule or a flavoured stick, the standard 80 mesh hydrolysate is usually enough. It comes with the catalogue documentation, dissolves readily and needs no granulation aid. A tighter peptide or ash limit only earns its place when the format is clear, the taste is exposed, or the label makes a claim that depends on the peptide fraction. Granulation does not improve a blend that already flows, and a fish source does not improve a formula that has no reason to carry one. A fish source adds an allergen declaration, and that declaration travels with the product into every market that keeps a list. Equally, native elastin is the wrong choice for an oral supplement: it is a different material with a different behaviour, and it should not be bought as “the same elastin” in an insoluble form. The catalogue hydrolysate is the material described here. The ranges are on the elastin peptides product page; the certificate lines are on the COA page; the comparison with collagen is on the elastin versus collagen page; the source file is on the compliance page. ### 02.1 Elastin peptides vs collagen peptides: two structural proteins URL: https://nutrition.rainwoodbio.com/products/protein-collagen/elastin-peptides/grades/elastin-vs-collagen-peptides/ Reviewed: 2026-11-19 Elastin and collagen are both structural proteins and both are sold as hydrolysates, but they are different molecules with different amino acid compositions and different crosslinks. Elastin is marked by desmosine and isodesmosine; collagen is marked by hydroxyproline. A specification and a label have to name which one is in the drum. In one lineElastin and collagen are separate proteins with separate markers, so one cannot stand in for the other on a specification or a label. ## Two proteins, two compositions Collagen is built around a triple helix. Glycine repeats every third residue, proline and hydroxyproline stiffen the chain, and the fibrils provide tensile strength in skin, bone and tendon. Elastin is a different architecture: an amorphous, heavily crosslinked network that recoils after stretching, found in ligaments, blood vessel walls and other elastic tissue. The two proteins sit beside each other in the extracellular matrix, which is why they are often discussed together, but they are not variants of one material. The amino acid composition follows the architecture. Elastin is one of the most hydrophobic proteins known: glycine makes up about one third of its residues, alanine, proline and valine account for much of the rest, and polar amino acids are low. Collagen is richer in proline and carries hydroxyproline and hydroxylysine, which elastin does not. Those two hydroxylated amino acids are the chemical trace of collagen, and their absence is part of what defines an elastin preparation. Hydrolysis changes the structure but not the composition. A collagen peptide and an elastin peptide are both water-soluble powders made of short chains, and both can be specified at ≥90% protein. What remains different is the amino acid pattern and the crosslinks that survive hydrolysis. That is why the protein figure cannot tell the two apart, and why the marker tests are not optional extras. ## The markers that separate them Hydroxyproline is the established collagen marker. It is measured by amino acid analysis or by a colorimetric method, and it appears in a collagen peptide at a level the catalogue fixes at 8.0–12.0%. Hydroxylysine supports the same conclusion. Desmosine and isodesmosine are the elastin-specific crosslinks: pyridinium rings formed from lysine residues, stable to the acid hydrolysis used to release amino acids, and measured by HPLC at 275 nm or by LC-MS/MS. Marker tests for elastin and collagen peptides | Marker | Protein | What it shows | Method | Hydroxyproline | Collagen | Collagen or gelatin present | Amino acid analysis or colorimetric | Hydroxylysine | Collagen | Supporting collagen evidence | Amino acid analysis | Desmosine and isodesmosine | Elastin | Elastin present | HPLC at 275 nm or LC-MS/MS after hydrolysis | Glycine, alanine, proline, valine | Elastin | Composition consistent with elastin | Amino acid analysis | Peptide content | Both | Degree of hydrolysis | HPLC A high protein figure proves neither marker. A collagen peptide can reach 95% protein and carry no desmosine at all; an elastin peptide can reach the same protein figure with a hydroxyproline result near zero. The markers are what the buyer reads when the label names one protein and the quotation names the other. ## What the label has to say The ingredient name is the first decision. “Hydrolysed elastin peptides” and “hydrolysed collagen peptides” are separate declarations, and a pack that says one while the drum contains the other is mislabelled even if the protein figure is identical. A blend is a third case: if the product contains both, both names belong on the label, with the proportions or the order that the destination rules require. The source belongs beside the name. Fish-derived material carries a fish allergen declaration in the EU and the US; bovine material carries a TSE/BSE statement and a species and tissue declaration. The label should match the specification, and the specification should name the marker that supports the name. ## Why blends are common, and how to see one Collagen is the larger-volume material of the two, and it is sometimes blended into an elastin product to lift the protein figure or to extend the powder. A blend can pass a protein specification and still be mostly collagen. The markers expose it: hydroxyproline rises in proportion to the collagen fraction, and desmosine falls in proportion to the elastin fraction. A blend is not automatically a defect. Some products are designed as elastin–collagen blends, and the label may say so. The defect is a blend sold as a single protein. If a blend is intended, the specification should state the ratio and set a minimum for each marker, so that the certificate can prove the ratio rather than only the total protein. ## Choosing between them Choose the elastin peptide when the label, the source story and the specification are built around elastin, and when the buyer is prepared to ask for the desmosine result. Choose the collagen peptide when the specification calls for hydroxyproline and a collagen peptide's molecular-weight distribution, or when the finished product already uses collagen and the label does not mention elastin. Both are animal-derived, so neither fits a vegan claim. Both are sold as powders with similar handling needs, and both are hygroscopic. The decision is about composition, marker and label, not about which powder flows better. The elastin peptides page carries the elastin ranges; the collagen peptides page carries the collagen ranges; the fish collagen peptides page covers the marine source; the grades page sets out the elastin choices. ## The two specifications side by side Elastin peptide and collagen peptide specifications | Property | Elastin peptide | Collagen peptide | Ingredient name | Hydrolysed elastin peptides | Hydrolysed collagen peptides | Source | Species and tissue named | Species and tissue named | Protein | ≥90.0%, factor stated | ≥90.0%, factor stated | Marker | Desmosine reported, with basis | Hydroxyproline 8.0–12.0% | Peptide or size | Peptide content ≥80.0% by HPLC | ≥90% below 3,000 Da by SEC-HPLC | Ash | ≤5.0% | ≤2.0% | Allergen and TSE | Fish allergen; bovine TSE where relevant | Fish allergen; bovine TSE where relevant The two specifications share the protein line and the source line, and diverge on the marker, the size definition and the ash limit. A buyer who copies the collagen template and changes the name has not written an elastin specification. The analytical evidence behind each column is on the identity page, the methods are in the methods library, and the quality page describes how a lot is released. ### 03 Elastin peptides: moisture, heat and the pack that sets shelf life URL: https://nutrition.rainwoodbio.com/products/protein-collagen/elastin-peptides/stability/ Reviewed: 2026-11-19 Elastin peptides take up water and darken with heat. Moisture pushes the as-is protein figure down and turns the powder sticky; heat, especially in a blend that contains sugar, drives browning and odour. The pack is the barrier, and the shelf life is written for the pack and the storage condition. In one lineMoisture and heat are the two failure routes for elastin peptides, so the shelf life belongs to the pack and the storage condition, not to the powder alone. ## The powder: water, caking and colour The specification allows up to 7.0% moisture at release. That number is a gate for the lot, not a budget for storage. An opened pouch exchanges water with the room, the moisture figure climbs, the protein percentage as weighed falls, and the powder begins to cake. A scoop left in the bag is enough to start the process. Heat makes it worse. Short chains with free amino groups react with reducing sugars, so a fruit-flavoured stick or a maltodextrin blend can brown before the protein result moves. Record colour and odour at each stability point; they often change first. Light matters less than water here, but it still belongs in the handling note. An opaque pack or a closed container removes one variable. ## The solution: a different set of risks The peptide dissolves to a clear to slightly turbid solution. Once dissolved, it is a microbial growth medium as well as a chemical system: heat, pH and contamination all act at once, and a warm hold tank is the weakest point in a liquid process. A hot fill or a pasteurisation step adds a heat load that can darken the solution. If a drink is the target, validate the hold time, the pH and the preservative system in the drink itself; a powder study does not answer for a beverage. ## What drives change Storage factors for elastin peptides | Factor | Effect | Countermeasure | Water | Softens the powder; lowers the as-is protein; feeds microbes | Seal the pouch; keep the store dry; add desiccant if needed | Heat | Browns the powder; shifts the odour | Cool store; cool process | Reducing sugars | Browning in blends and chews | Separate the sugar phase; keep water activity low | Oxygen | Oxidation and off-odour in solution | Minimise headspace; keep the pack closed | Light | Slow colour drift | Opaque or foil pack; dark store | pH | Solution colour and stability | Validate the matrix; buffer where needed | Metal contact | Colour and complexation in solution | Use stainless or plastic wetted parts | Microbial load | Growth after reconstitution | Hygienic handling; validated hold time The factors compound. A damp pouch beside a warm wall reaches the browning stage faster than either condition alone would suggest, and a sugar-containing blend is the quickest place to see it. The question to ask is never whether elastin is stable in general, but how long it holds in a named pack under a named condition. ## A protocol written around the pack The protocol should name the pack that will ship, the storage conditions, the sampling points and the tests. A common design uses 25 °C/60% relative humidity for long-term storage, 30 °C/65% for intermediate and 40 °C/75% for accelerated, with a separate light-exposure arm. Those conditions stress different failure modes, and the report should say which one produced which change. At each point, measure protein, peptide content, moisture, appearance, desmosine and microbiology. Desmosine is a covalent crosslink and should not drift during storage; a move in that figure points to a different lot rather than to a storage effect. Report the numbers rather than a verdict, and identify the pack and the lot family in the report. Buy data for the pack you order. Headspace, surface area and the number of openings differ between a pouch and a drum, so a summary for one does not cover the other. ## The finished formula changes the answer Capsules and tablets run at low water activity, yet the shell and the excipients can still carry moisture into the fill. Measure moisture at release and after storage, and watch the fill for caking or colour. A stick pack lives or dies by its seal. Inspect the strip, not only the powder; a pinhole is a failure even when the powder still passes assay. A gummy or chew is the hardest matrix for this ingredient: sugar, water and heat together are the browning conditions. Run the grade trial in the matrix, at the process temperature, and judge the colour after storage rather than on the day of manufacture. ## How the shelf life is set No single shelf-life figure is published for elastin peptides. The retest period is assigned to a pack and a storage condition, and it rests on the stability file for that pack. A figure quoted without those three pieces is a claim, not a shelf life. At the end of the retest period, re-test the retained sample before extending use. Do not extend by default, and do not move a bulk figure onto a repacked container. The standard packs are on the product page; the release tests are on the COA page; pack sizes and lead time are on the MOQ page; the analytical methods are in the methods library; the storage and release route is set out on the quality page. ### 04 Elastin peptides: MOQ, packs and the ordering file URL: https://nutrition.rainwoodbio.com/products/protein-collagen/elastin-peptides/moq/ Reviewed: 2026-11-19 The minimum order for elastin peptides is 1 kg, packed in a foil pouch; production quantities normally move in a 25 kg fiber drum, and the quoted lead time is 1–7 days. Six details make an offer firm: the source and specification, the quantity and pack, the destination and Incoterm, the documents, the intended use and the market. In one lineOne kilogram is the minimum because a smaller split loses the lot identity that the qualification sample depends on. ## Why the smallest order is one kilogram One kilogram is the smallest unit we can call a lot. It carries a lot code, it can be sampled and tested, and it is large enough for a bench trial, a retained sample and an independent check. That combination is what a qualification needs. A kilogram also moves as a parcel. When a formulator is still choosing between two grades, a parcel-sized order keeps the trial off a pallet and out of a freight forwarder's schedule. Anything smaller is normally cut from a larger lot and repacked. The powder is unchanged, but the pack is no longer the one the certificate describes, and the traceability chain now includes a repacker. For a hygroscopic material that is a real loss: every opening exposes the powder to air. The 25 kg drum is the production pack. The drum reduces the handling behind each kilogram, but it also ties up inventory and keeps the powder in storage for longer. The minimum follows the pack, not a volume target. ## Packs and formats Packs for elastin peptides | Pack | Size | Where it fits | Handling | Foil pouch | 1 kg | Bench trial and qualification | Heat-sealed; close it after each opening | Fiber drum | 25 kg | Production runs | Keep the liner closed; note the opening date | Granulated powder | On request | Sachets and tableting | Granulation aids declared The standard powder passes 80 mesh at ≥95%. Granulation is a different specification: the particle-size line, the flow and the dispersion time all change, and the offer has to say so. Ask for it before the quotation, not after the purchase order. ## Lead time and dispatch For the standard pack we quote 1–7 days from confirmation. Picking, paperwork and dispatch sit inside that window; freight transit, customs and the buyer's own release do not. A custom granulation or a non-standard pack needs its own estimate, stated separately. Get the dispatch date in writing, not just a lead time. A drum and a pouch are different consignments, and the Incoterm fixes who books the freight and clears the entry. The lot documents should leave with the goods. ## What a firm quotation contains Six details make an offer comparable: - Product and source. Hydrolysed elastin peptides, with the species and tissue named. - Specification. Protein with its factor and basis, peptide content, desmosine, ash, moisture, particle size, heavy metals and microbiology. - Quantity and pack. The 1 kg pouch, the 25 kg drum, or a granulated version. - Destination and Incoterm. Country, delivery point and trade term. - Documents. COA, specification, SDS, allergen statement and any market-specific declaration. - Use and market. Supplement, food or another use, and where it will be sold. Ask for the specification revision on the offer. If the revision differs from the one on the COA, the comparison is not like for like, and the difference usually sits in a line such as peptide content or ash that the buyer did not notice. An offer that omits the source or the market is not yet firm. The same powder can fit one destination and fail the file for another, and the allergen or TSE statement is part of the commercial package. Commercial terms are stated on the quotation, not on this page. ## The sample is a lot The 1 kg pouch is the qualification sample, not a demonstration. Test identity, protein, peptide content, desmosine and microbiology, then keep part of the same pack as the retained sample. The lot code should be the one on the COA and on the offer. Keep the retained sample in its original pouch rather than a screw-top jar. The foil is the moisture barrier, and a jar in a drawer is not an equivalent container. A smaller bench quantity is possible, but it is a repack from a bulk lot with its own record. Regard it as a different pack with a different history, and do not assume it shares a lot with the drum that follows. ## Terms to settle before the first order Commercial terms — Incoterm, pack, lead time, documents — sit in the quotation. Quality terms sit beside them: the revision that applies, a COA for every lot, what sample is kept, how long it is kept and how a change is handled. A quality agreement signed before the first production order avoids a dispute after it. A failed lot is resolved by a joint re-test on the retained sample; a photograph settles nothing. Agree in advance who pays for the referee laboratory and which laboratory both sides accept. The catalogue ranges are on the elastin peptides product page; the release tests are on the COA page; the source file is on the compliance page; the glossary defines MOQ; the logistics page covers shipping and documents. ### 05 The regulatory file for elastin peptides URL: https://nutrition.rainwoodbio.com/products/protein-collagen/elastin-peptides/compliance/ Reviewed: 2026-11-19 Elastin peptides come from animal tissue, so the regulatory file begins with the species and the tissue rather than with the protein figure. The destination sets the route, and the buyer's regulatory team confirms it for the material, the source and the use. What follows is the document set and the checks behind it. In one lineThe specification describes the powder; the regulatory file shows the source, the route and the label for the destination. ## What the file has to settle A regulatory file has to answer four things: which material and which specification version are being bought; which lot is on the certificate; which route, contaminant limits and label rules apply where the product will be sold; and what has to be re-opened if the tissue, the plant or the pack changes. The COA speaks to the lot, the technical data sheet to the specification and the safety data sheet to handling. None of the three settles the route. Animal-derived material adds documents. Species, tissue and country of origin have to be declared, with an allergen statement for fish material, a TSE statement for bovine material and a change-control route for any source change. A new tissue is a new specification, not a purchasing detail. ## European Union The first question is whether this exact material has a documented history of consumption in the EU before 15 May 1997. If not, Regulation (EU) 2015/2283 applies and a novel-food authorisation may be required before sale. The question is material-specific: egg membrane hydrolysate, whose proteins are mainly elastin and collagen, has been assessed under that framework, which shows that the answer turns on the tissue and the process rather than on the word “elastin”. Labelling sits under Regulation (EU) No 1169/2011. Fish is an Annex II allergen, so fish-derived elastin must be declared; an egg-membrane source brings the egg allergen instead. Bovine material needs the TSE file under Regulation (EC) No 999/2001, with species and tissue stated. Contaminants are checked against Regulation (EU) 2023/915 at the finished-product dose, and claims against Regulation (EC) No 1924/2006. ## United States In the US the file follows the dietary ingredient and its intended use. The supplier states the basis it relies on and cites the document behind it; the buyer checks that the basis reaches the ingredient, the tissue and the finished product. A new dietary ingredient notification is one possible route, not a blanket requirement. Manufacturing sits under 21 CFR 111, and the Supplement Facts panel under 21 CFR 101.36. Fish is a major allergen under US labelling, so fish-derived elastin is declared; an egg source brings egg. Bovine material raises the BSE question and the origin paperwork. State rules can add thresholds; California's Proposition 65 is the one most often assessed for lead and cadmium. ## Contaminants and limits Contaminants are judged at the finished-product level, not only in the drum. The figures below are a starting point for a supplement file: the destination text in force and the daily dose fix the final limit. Contaminants to calculate at the finished-product dose | Contaminant | Common supplement limit | Evidence the file needs | Lead (Pb) | 3.0 mg/kg in the supplement | Lot figure, method, limit and the dose calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot figure and any category exception that applies | Mercury (Hg) | 0.10 mg/kg in the supplement | Lot figure and method | Arsenic (As) | Customer or market limit | The agreed limit, the method and the result The drum figure has to be carried through the serving size, so the reviewer needs the calculation, not only the raw number. A result without its method cannot be compared with a limit. Ask for each element separately; a combined metals total hides the one that matters. ## Claims and label wording The ingredient, its quantity and its source must appear on the label in the form the destination prescribes. Claim review is a separate exercise. In the EU a health claim must be authorised and used under its conditions; in the US a structure-function claim has its own wording and notification route. Neither permits a disease claim, and a certificate never approves a claim. Composition wording — protein, peptide content, source — should be supportable from the specification. Wording about an effect in the body is a claim and belongs to the brand's reviewer. Keep the two apart on the pack. ## The document set Before a first order, the file should hold the specification, the lot COA, the technical data sheet, the safety data sheet, the allergen statement, the species and tissue declaration, the country of origin and, for bovine material, the TSE/BSE statement. Add the GMO statement, the residual-solvent statement and any declaration the importer asks for. Date or version every document. The offer, the specification and the certificate should point to the same version. Undated PDFs are not a file, and a statement that cannot be tied to a lot describes a product family, not a drum. ## Checklist before the first order - The specification version, the species and the tissue are written down. - COA, TDS, SDS and the allergen, origin, TSE/BSE and GMO statements sit in the file. - Each contaminant result has been recalculated at the finished-product dose. - The buyer's regulatory team has confirmed the route for the destination. - Label and claim wording has been reviewed for that destination. - Source, process and pack sit under a change-control procedure. The catalogue ranges sit on the elastin peptides product page; the lot certificate is explained on the COA page; the analytical evidence is on the identity page; the EU framework is summarised in the regulatory notes; the quality page describes the release file. ### 06 How we prove an elastin peptide lot is elastin URL: https://nutrition.rainwoodbio.com/products/protein-collagen/elastin-peptides/identity/ Reviewed: 2026-11-19 An elastin peptide lot is the named material when the document, the amino acid profile, the peptide distribution and the desmosine crosslink agree. None of them is proved by protein alone: a collagen peptide, a gelatin hydrolysate or a whey blend can all reach 90% protein. The marker is what separates elastin from the other proteins in the drum. In one lineIdentity rests on four agreeing measurements: the document, the amino acid profile, the peptide distribution and the desmosine crosslink. ## The identity layers A certificate may name the right material without proving that the drum contains it. The layers below are separate questions, and each needs its own evidence. An answer that stops at the first layer describes paperwork, not powder. Identity layers for an elastin peptide | Layer | What it settles | Technique | Evidence produced | Document | Is the material named? | Name, species, tissue, CAS where one applies | Paperwork only | Amino acid profile | Is the composition elastin-like? | Amino acid analysis | Composition, not source | Peptide distribution | Is it a hydrolysate? | SEC-HPLC | Degree of hydrolysis | Desmosine | Is there elastin? | HPLC at 275 nm or LC-MS/MS after hydrolysis | The elastin-specific crosslink | Mass balance | Is it diluted? | Protein, ash, moisture | Consistency of the numbers ## The ratios that carry the argument Elastin is a hydrophobic protein. Glycine makes up about one third of its residues, and alanine, proline and valine account for much of the rest; polar amino acids are low. Collagen has a different pattern: glycine repeats every third residue, and it carries hydroxyproline and hydroxylysine; elastin lacks both. An amino acid analysis therefore separates the two families without needing the species. The elastin-specific ratio is desmosine per gram of protein, or per 1,000 amino acid residues. Report it against a stated basis, not as a peak area, because a peak area cannot be compared between laboratories. Desmosine and isodesmosine are pyridinium rings built from lysine; the acid hydrolysis that releases amino acids leaves them intact, which is what makes them measurable in a hydrolysate. The collagen check runs beside it: hydroxyproline per gram of protein. Elastin carries little or no hydroxyproline, so an elevated figure points to collagen or gelatin. A high hydroxyproline figure with a low desmosine figure is the classic signature of a collagen peptide sold as elastin. The ash figure is the third ratio: ash that is high while protein is normal points to salt or neutraliser rather than to a protein-rich powder. No single desmosine threshold travels across species. Fish elastin carries less desmosine than mammalian elastin, so the figure is meaningful within a declared source. The specification should fix the source first and the marker second. ## X-ray diffraction: a narrow use Elastin is amorphous, and a hydrolysate is more amorphous still. An X-ray diffraction pattern for this powder is a broad halo, not a set of sharp peaks, so the technique cannot confirm elastin identity and is not a routine release test. What it can do is show that a powder is crystalline where it should not be: sharp peaks point to a crystalline salt, a mineral carrier or an excipient. Before accepting a “match”, ask which reference pattern was used and how small a signal the method can see. XRD earns its place when the question is solid form or dilution, not when the question is whether the material is elastin. The desmosine line and the amino acid profile answer that question; XRD answers a different one. ## What adulteration looks like Substitutions seen in elastin peptide lots, and the signals | Substitute | Effect on the lot | Signal | Check | Collagen or gelatin | Adds protein from a different protein family | Hydroxyproline high; desmosine low | Amino acid profile, desmosine | Whey or soy protein | Raises the protein figure | Different amino acid pattern; no desmosine | Amino acid profile; species assay where protein is intact | Free amino acids | Protein high, peptide low | Peptide content below 80.0% | HPLC peptide content | Maltodextrin or starch | Dilutes the powder | Protein and peptide low; ash normal | Mass balance, carbohydrate test | Salt or neutraliser | Raises the ash | Ash above 5.0%; sodium high | Ash, sodium by ICP-OES | Non-elastin tissue | Protein looks normal | Desmosine low for the declared source | Desmosine, amino acid profile Colour is the weakest signal. Off-white to light tan covers a wide range, and a tan powder is not evidence of elastin. The stronger signals are the marker ratios, the peptide content and the mass balance. ## How to write identity into the specification - “Hydrolysed elastin peptides; species and tissue named on the certificate.” - “Protein ≥90.0% by Kjeldahl; nitrogen factor and basis stated.” - “Peptide content ≥80.0% by HPLC; chromatographic mode stated.” - “Desmosine reported per gram of protein or per 1,000 residues, with the method.” - “Hydroxyproline reported as a collagen check; a limit can be agreed for the source.” - “Ash ≤5.0%; moisture ≤7.0%; particle size ≥95% through 80 mesh.” - “Allergen statement for fish material; TSE/BSE statement for bovine material.” Written this way, the specification can be tested line by line and compared between suppliers. One that names only the protein range leaves the marker, the peptide content and the source open. ## Five questions for the supplier - Which species and tissue is this lot, and where was it sourced? - What is the desmosine result, by which method, and on what basis is it reported? - What is the hydroxyproline figure, and what does it say about collagen in the lot? - What is the peptide content and the chromatographic mode behind it? - If this lot were disputed, would you re-test the retained sample jointly? Those five answers, taken together, are the identity file. A single protein percentage does not. Start from the product page for the ranges; the COA page shows where each line sits on the certificate; the grades page covers the choices; the elastin versus collagen page sets out the comparison; the methods library explains the techniques. ### 01 What the COA for fish protein peptides reports URL: https://nutrition.rainwoodbio.com/products/protein-collagen/fish-protein-peptides/coa/ Reviewed: 2026-11-19 A fish protein peptide certificate reports protein with its nitrogen factor and basis, the peptide fraction with its HPLC window, ash, moisture, heavy metals, microbiology and particle size. Each line carries a method and a release limit, and the batch result belongs in its own column. The tables below hold the catalog specification; the certificate confirms a particular lot. In one lineThe protein figure is a nitrogen calculation and the peptide figure is an HPLC fraction, so the certificate means little without the factor, the basis and the window. ## What the sheet has to show A certificate is auditable when every row answers three questions: what was measured, by which method, and against which limit. A line that reports only “conforms” replaces the measurement with an assertion. Protein and peptide are the rows most often confused. Protein is a nitrogen calculation; peptide is a chromatographic fraction. They are not interchangeable, and a specification needs both. Identity, protein, peptide and contaminants · fish protein peptides | Parameter | Method | Release limit | Appearance | Visual | Off-white to light tan powder | Protein | Kjeldahl, nitrogen factor stated | ≥80.0% | Peptide content | HPLC, molecular-weight window stated | ≥70.0% | Ash | Gravimetric, furnace | ≤10.0% | Moisture | Gravimetric, 105 °C | ≤7.0% | Identification | Protein and peptide profile against the reference | Conforms | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh Read the ash line with the source in mind. The ≤10.0% window is wide, and a lot near the top is saying something about the raw material or the neutralisation step that protein does not. ## Protein basis, the nitrogen factor and the peptide window Protein is calculated: nitrogen multiplied by an agreed factor. The factor belongs beside the result. A general food-protein factor of 6.25 is usual for fish muscle; collagen is calculated at 5.55. The same nitrogen read with the two factors differs by about 13%, enough to move a lot across the 80.0% gate. The certificate should name the factor, and the specification and label should use the same one. The basis is the other half. As-is and dry-matter results describe different powders. A lot at 80.0% as-is with 7.0% moisture is 86.0% on the dry basis (80.0 ÷ 0.93). Neither figure is wrong; a quotation that compares one with the other is comparing different numbers. Peptide content has its own window and basis. The HPLC method defines a molecular-weight range, integrates that fraction and reports it. “Peptide ≥70%” without the window and integration method is a headline. Peptide should not exceed protein: at the limits and on the same basis, 70.0% against 80.0% means at least 87.5% of the protein mass is peptide. Ash and moisture close the balance. At 80.0% protein, 10.0% ash and 7.0% moisture, about 3% remains for fat, carbohydrate and other material. A lot at 80% protein, 10% ash and 10% moisture has an arithmetic problem before identity is discussed. ## The limit, the result and the evidence The limit defines what the lot had to meet; the result records what the laboratory found. Keep them in separate columns with the method alongside, because a result column that repeats the specification has recorded no measurement. What the result column should contain | Parameter | Release limit | Result column | Protein | ≥80.0%, factor and basis stated | A measured percentage, with factor and basis | Peptide | ≥70.0%, window stated | A measured percentage, with window and method | Ash | ≤10.0% | A measured percentage | Heavy metals | Per element | A separate figure in mg/kg for every metal | Microbiology | Counts and absence | The plate count plus the absence result for the lot A pass statement is only as good as the figures behind it. Each metal needs its own result, and the microbiological line needs a count plus the absence finding. ## What moves between batches The raw material moves first. Fillet trimmings, frame material and mixed by-product streams differ in species mix, season, nitrogen and ash. A lot from a new source can meet every limit and still behave differently in a blend. Hydrolysis moves the peptide curve and the taste. A longer hydrolysis raises the short-chain fraction and can make the flavour more savoury or bitter; a shorter one leaves larger peptides and different foaming. Drying moves moisture, density and colour; milling moves the 80 mesh result without changing chemistry. Colour and odour are the least quantitative lines and often the most revealing. Off-white to light tan is a wide window, and a fish note is normal. A batch that turns darker or more rancid can point to oxidised lipid while protein still passes; ask for the batch and raw-material record before rejecting on appearance alone. Look at the trend across lots rather than a single result near a limit: protein drifting low, ash climbing, moisture rising. Check that one lot code links the pouch, the drum and the retained sample. ## When to order an outside test Commission an outside test for a new source, a first regulated-market shipment, a species claim the certificate does not prove, or a disputed result. The panel should add to the certificate rather than repeat it: Kjeldahl with the factor, HPLC peptide distribution, an amino acid profile including hydroxyproline, ICP-MS, microbiology and a species check where a species is named. For a fish source, add two questions. Histamine is a risk-based test for susceptible species and a failed cold chain; total arsenic is on the catalog panel, and a marine source may warrant speciation if the destination asks. Neither replaces the protein or peptide data. Request the detection limit with every screen; a “not detected” entry means little until that limit is stated. Keep the chain of custody intact: test the retained sample, and settle a dispute by a joint re-test rather than a second run of the same method. ## Six points for a supplier comparison Compare six points: species and tissue; protein factor and basis; peptide window and method; ash and moisture; the fish allergen statement; pack and lot code. Two offers that match on protein but diverge on factor or window describe different powders. Traceability is the next layer: who made the lot, which raw material and hydrolysis route, which drying and milling steps. Start with the fish protein peptides product page for the catalog; the identity page covers the source evidence; the compliance page covers the allergen and market file; the methods library holds the assay notes; the quality page sets out the release workflow. ### 02 Fish protein peptide grades: peptide, ash and mesh URL: https://nutrition.rainwoodbio.com/products/protein-collagen/fish-protein-peptides/grades/ Reviewed: 2026-11-19 Fish protein peptides are supplied here as one catalog grade: an off-white to light tan powder at ≥80.0% protein by Kjeldahl and ≥70.0% peptide by HPLC, ash ≤10.0%, milled to 80 mesh. What remains to settle is the peptide fraction, the ash, the mesh and the granulation. Those four change flow, taste, solubility and the label more than the trade name on the drum. In one lineWhat separates one fish peptide grade from another is the peptide fraction, the ash and the mesh, not the trade name on the drum. ## Why a fish peptide grade is a specification The name covers a family of hydrolysates rather than one powder. Two suppliers can apply it to different tissues, different degrees of hydrolysis and different meshes, and the protein figure can agree while the peptide curve, the mineral load and the flow differ. The catalog fixes five grade lines: protein ≥80.0%, peptide ≥70.0%, ash ≤10.0%, moisture ≤7.0% and ≥95% through 80 mesh. Change one and you have a new specification, not a packing variant. Fillet trimmings, frame material and mixed by-product streams carry different mineral loads and species mixes. The source also separates this product from fish collagen peptides: collagen is a specific protein from skin or scale, described by hydroxyproline and molecular weight, and neither mesh nor peptide figure changes that. ## The catalog grade and the variants that need a new specification Fish protein peptide forms and what changes | Form | What changes | Why a buyer asks | 80 mesh powder | The standard grade; nothing changes | Capsules, tablets and powder blends | Granulated, on request | Coarser particles, less dust, easier flow | Blending and capsule feeding | Different mesh | Wetting, mouthfeel, sieve result | A tablet or a suspension needs another particle size | Higher peptide fraction | A new hydrolysis and filtration target | A formula or label calls for more short-chain material | Lower ash | A different raw material, washing or neutralisation regime | A high-dose drink or a formula with a mineral limit | Dilution or carrier | Less peptide per gram; the ingredient list changes | A lower potency is easier to weigh | Fish collagen peptides | A different protein and a different label ingredient | A collagen claim, not a fish peptide claim Rows three and four are easy to mix up. Mesh is a milling decision and leaves the chemistry alone. A higher peptide figure comes from the hydrolysis, not the mill. A dilution brings a carrier and rewrites the ingredient list. When a supplier quotes “fish peptide 80%” and “fish peptide 90%”, ask which figure is protein, which is peptide and which is a dilution. Granulation alters particle size and flow while the protein and peptide figures stay put, but the mesh result and the wetting behaviour move. Even with identical chemistry, the granulated form is a separate specification line. The comparison with fish collagen is taken further on the fish peptides versus fish collagen page. ## Flow, dust, colour and solubility At 80 mesh the particles pass roughly 177 µm. The powder runs in a capsule machine yet dusts on pouring, and dust can separate in a blend. Granulation binds the fines, cutting dust and easing flow, but it wets more slowly and gives a different sieve result. The catalog appearance is off-white to light tan. Raw material, decolourisation and drying temperature all shift the colour, and a tan drift inside the range is not a failure. Odour is a fish note, stronger in a less refined lot and milder after a longer wash. The powder dissolves in water and leaves a solution that is clear or only slightly turbid. Haze can come from undissolved fines, a coarser peptide fraction or a heavy mineral load; test in the matrix at the use concentration, not only at 1% in water. The 80 mesh powder takes up moisture faster than the granulated form; granulation is not a barrier. ## What the grade means in a capsule, tablet or blend Capsules take the 80 mesh powder as it arrives. The fill weight is set by bulk density and the target peptide amount, and the capsule room needs to be dry because the powder pulls moisture from the air. A granulated grade can improve flow, but it changes the fill weight for the same volume and the label dose must be recalculated. Tablets demand flow and compressibility; a hygroscopic fine powder can bridge in the hopper or cap. Granulation is the usual answer. In a blend, match the particle size of the other ingredients so the mix does not separate. Ash matters most in a high-dose format. At the 10.0% limit, 5 g of powder carries up to 0.5 g of ash. That figure is not all sodium, but it is the mineral load the formula has to accept, and it is one reason a lower-ash grade needs more processing. A stick pack also has to accept the fish note and the colour in the finished drink. ## What to write into the specification - “Fish protein peptides; name the species or species mix, the tissue and the country of origin.” - “Protein ≥80.0% by Kjeldahl; record the factor and whether the value is as-is or dry.” - “Peptide content ≥70.0% by HPLC; record the window and the integration method.” - “Ash ≤10.0%; moisture ≤7.0%; appearance off-white to light tan.” - “Particle size ≥95% through 80 mesh; granulation on request is a separate line.” - “Fish allergen statement, heavy metals, microbiology and the destination market as agreed.” - “Pack, storage condition and retest period for the pack on order.” A specification that lists only “fish peptide 80%” has left the peptide, the ash, the source and the mesh open. Catalog values are on the fish protein peptides page; the COA page shows how each line is reported; the methods library explains the peptide distribution; the release file is described on the quality page. ## When another grade is the wrong buy A diluted powder is the wrong buy when the label declares a peptide amount per serving and the finished weight is fixed; the carrier has to be declared and the dose changes. A higher protein number is a false upgrade if the peptide figure drops, because the label would then buy nitrogen that is not in short chains. A granulated form is wrong for a process that needs a fast-dissolving fine powder and cannot wet granules. The clearest wrong purchase is a different protein sold under the same name. Fish collagen peptides carry a collagen identity and a different nutrient profile, and a fish peptide label does not become a collagen label because the powder dissolves clearly. If the marketing story needs collagen, buy the fish collagen peptides product; if the formula needs a broader fish protein hydrolysate, keep the peptide grade and describe it accurately. ### 02.1 Fish protein peptides vs fish collagen peptides URL: https://nutrition.rainwoodbio.com/products/protein-collagen/fish-protein-peptides/grades/fish-peptides-vs-fish-collagen/ Reviewed: 2026-11-19 Both are water-soluble powders made by hydrolysing fish material, and both must be declared as fish. They are not interchangeable. Fish protein peptides are built on muscle or mixed by-product protein at ≥80% protein and ≥70% peptide; fish collagen peptides are built on skin or scale collagen at ≥90% protein with 8–12% hydroxyproline. The difference reaches the amino acid profile, the ash, the taste and the ingredient name. In one lineFish protein peptides and fish collagen peptides share the fish allergen but not the raw material, the amino acid profile or the ingredient name. ## Two raw materials, both fish A fish protein hydrolysate starts from muscle protein: fillet trimmings, frame material or a mixed by-product stream. The protein is mainly myofibrillar, with a broad amino acid pattern that includes the sulfur amino acids and lysine. Hydrolysis cuts it into peptides; the raw material still decides the ash, colour and fish note. A fish collagen hydrolysate starts from connective tissue, usually skin or scale. Collagen is a structural protein: glycine at roughly every third residue, hydroxyproline as its signature. Skin arrives wet and fatty; scale arrives mineralised and must be demineralised before hydrolysis, which changes the ash and colour. Neither name fixes the tissue: “fish protein peptides” can be muscle, frame or a mixed stream, and “fish collagen peptides” can be skin or scale. The specification should name both tissue and species. ## Protein, peptide and hydroxyproline Fish protein peptides and fish collagen peptides · catalog values | Parameter | Fish protein peptides | Fish collagen peptides | Protein | ≥80.0% (Kjeldahl) | ≥90.0% (Kjeldahl, N × 5.55) | Peptide measure | ≥70.0% by HPLC | ≥90% below 3,000 Da by SEC | Hydroxyproline | Low; state the expectation | 8.0–12.0% by HPLC | Ash | ≤10.0% | ≤2.0% | Appearance | Off-white to light tan | White to off-white | Allergen | Fish | Fish | Ingredient name | Fish protein peptides | Fish collagen peptides The protein and peptide figures are not two views of one number. For collagen, the second line is a molecular-weight distribution: ≥90% below 3,000 Da. For fish protein, it is an HPLC peptide fraction inside a stated window. A fraction and a size cut-off are not comparable. Hydroxyproline is the strongest discriminator. Muscle protein carries little; collagen carries 8–12%. A fish protein lot with a collagen-like figure is collagen or a blend; a collagen lot with a low figure is not collagen. The factor follows the material, 6.25 for general protein and 5.55 for collagen, and the wrong one shifts the figure by about 13%. ## Ash, colour and odour Ash separates the two most visibly: ≤10.0% for fish protein, ≤2.0% for collagen. The gap is not a quality ranking; it reflects the raw material. Muscle and frame carry more mineral, and neutralisation leaves salts in the powder; skin carries little, and scale is demineralised first. At 10% ash, 5 g of fish protein powder carries up to 0.5 g of mineral; at 2%, the same 5 g of collagen carries at most 0.1 g. The load is part of the formula and the taste, and a low-ash fish protein lot is a different specification, not a grade. Colour and odour follow the same pattern. The fish protein powder is off-white to light tan and smells of fish or broth; collagen is white to off-white and milder. The note can be reduced by washing, but it belongs to the material and should be tested in the matrix. ## Solubility, taste and the formula Both products dissolve in water. Fish protein peptides dissolve to a clear or faintly turbid solution and can carry foaming or emulsifying behaviour from the muscle protein. Collagen peptides give a clear to slightly hazy solution and are used where a neutral taste is the point. Foam and neutrality are different briefs. Taste is the practical divider. A fish protein hydrolysate brings a savoury, broth-like note and, at higher hydrolysis, some bitterness. Collagen is closer to neutral, which is why it appears in flavoured drinks and gummies. In a capsule the taste matters less; in a ready-to-mix drink it may decide the choice. The dosage form follows. A capsule takes either powder, but the fill weight differs. A tablet needs flow and compressibility, and either may need granulation. A stick pack needs a powder that disperses in the stated volume and whose taste the flavour system can carry. ## The fish declaration Fish is the allergen in both products, and the tissue does not change that. In the EU, fish is in Annex II of Regulation (EU) No 1169/2011; in the United States it is a major allergen under FALCPA; in the United Kingdom it is one of the 14. A hydrolysate is a fish product, and the narrow fish gelatin exemptions do not cover it. The statement belongs on the specification and the label: “Contains fish”, with the species named where the market expects it. A species claim needs a traceability record and, on request, a species-specific test. “Fish-free” is not available, and “hypoallergenic” is not a description this file supports. The declaration follows the source, not the process. Hydrolysis reduces peptide size; it does not make the declaration optional. A switch between the two products keeps the fish declaration and changes the ingredient name. ## The ingredient name “Fish protein peptides” and “fish collagen peptides” are different ingredient descriptions, and the label has to match the powder. Collagen is a claim supported by hydroxyproline and the collagen specification. A muscle-protein hydrolysate does not become collagen because the marketing story prefers the word. “Marine collagen” belongs to marketing, not to regulatory categories. It says nothing about which fish was used, and it should not replace the species or tissue where the label makes a source claim. A “type I collagen” claim needs a characterisation report. Species naming cuts both ways. A species name on the pack needs support in the traceability record; a mixed-species stream makes that harder. The safe label is the accurate one: fish, the species where known, and the ingredient name that matches the certificate. ## When to choose which Choose fish protein peptides for a broader protein and peptide profile, a savoury matrix, or a capsule where collagen identity is not the story. Choose fish collagen peptides when the label needs collagen, the taste and colour must stay neutral, the ash load matters in a clear drink, or the formula is built around hydroxyproline. Both are fish, both need the allergen declaration, and both need a specification that names the species and tissue. The decision belongs in the written specification, not in an email. The catalog values are on the fish protein peptides page; the collagen values are on the fish collagen peptides page; the wider range is on the collagen peptides page; assay notes are in the methods library; the release file is on the quality page. ### 03 Fish protein peptides: moisture, odour and the pack URL: https://nutrition.rainwoodbio.com/products/protein-collagen/fish-protein-peptides/stability/ Reviewed: 2026-11-19 Fish protein peptides are hygroscopic and carry a fish note, and moisture, oxygen, heat and light are the variables that move them during storage. The sealed foil pouch or drum is the barrier; the shelf life is assigned from stability data for the exact pack and storage condition. An aqueous solution is the least stable format. In one lineMoisture, oxygen and heat are the storage risks, and the seal on the pack decides how long the powder stays free-flowing. ## The powder: moisture, caking and colour The ≤7.0% limit is a release gate, not an allowance for storage. An opened pouch takes in moisture, the result climbs, the as-is protein falls and the powder begins to cake. In practice the seal and the dry store are part of the specification, whether or not the certificate mentions them. Moisture also drives browning. A protein powder with a reducing sugar present can darken through the Maillard reaction, and the rate rises with water activity and temperature. The change is visible as a tan to brown shift and a different flavour, while the protein result may still pass. Colour is therefore a storage indicator, not only a release line. Oxygen attacks the lipid fraction. A fish protein powder can develop a rancid or stale note as residual lipid oxidises, and the odour is often noticed before any chemical result moves. Nitrogen flushing or a vacuum pack helps only if the pouch is specified for it; the standard pack does not imply either. Heat accelerates both moisture pick-up and oxidation. Ambient warehouse temperatures suit the sealed pack; a hot loading bay, a parked car or a glasshouse does not. Allow a cold-stored pack to equilibrate before opening, so condensation does not form on the powder. ## The solution: the least stable format A protein solution is a microbiological medium. Once the powder is dissolved, the low water activity that protected it is gone, and the hold time, the pH and the process temperature decide what grows. Pasteurisation or hot fill applies a heat load that the powder does not meet, and the protein can foam, thicken or change colour at the same time. Where a liquid cannot be avoided, shield it from light, set the pH, limit dissolved oxygen and prove the hold time before filling. A preservative system is a formulation decision that has to be checked against the destination rules, not assumed from the ingredient specification. Data from the bulk powder cannot be read across to a beverage. ## What drives change during storage Factors that move fish protein peptides during storage | Factor | What it does | Control | Moisture | Caking; lowers the as-is protein; feeds browning | Sealed pouch; desiccant where needed; dry store | Oxygen | Oxidises residual lipid; rancid or stale odour | Low headspace; sealed pack; nitrogen on request | Heat | Accelerates moisture, browning and oxidation | Controlled store; cool process | Light | Accelerates oxidation and colour change | Foil or opaque pack; dark store | pH | Changes solution stability, colour and taste | Validate the matrix pH; buffer if needed | Metal ions | Catalyse oxidation and colour change | Avoid iron and copper contact | Microbiology | Growth in the dissolved powder | Water activity control; validated hold time The factors interact. Warmth, light and humidity reinforce one another, so a bright humid store is worse than three separate stresses, and a neutral solution in clear glass combines light, oxygen and microbial risk. The useful question is not whether the powder is stable in general, but stable in which pack, at which condition, for how long. ## Running a stability study The protocol should fix the pack, the condition, the time points and the assays. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% relative humidity cover the warehouse; accelerated storage at 40 °C/75% relative humidity stresses the pack. A light-exposure arm covers the failure mode that a dark incubator misses, and an oxygen-sensitive arm is worth adding where the pack claims a low headspace. Test protein with the factor stated, peptide distribution, moisture, ash, appearance, odour, microbiology and solubility at each point. Odour needs a defined panel or a descriptor scale; “fishy” is not a result unless the method says how it was scored. For a stick pack or beverage, repeat the work in the drink matrix, at the pH and heat load it will meet. Request the stability summary for the pack on the purchase order, not for another pack in the same family. A 25 kg drum and a 1 kg pouch have different surface-to-volume ratios, different headspace and different opening histories; the data belongs to the pack. ## The formula changes the answer Capsules and tablets run at low water activity, but shells and excipients can still move moisture into the fill. Check moisture at release and after storage, and check the fill for caking and colour. A granulated grade flows better but is still hygroscopic; granulation is not a moisture barrier. A stick pack lives or dies on its seal. A pinhole is a failure, so inspect the strip as well as the powder. A beverage combines light, pH, heat and oxygen, and the fish note can become more prominent over shelf life. Whether an overage is needed is a label and stability decision, and no overage repairs a pack that lets moisture in. ## How the shelf life is set There is no single shelf-life figure for fish protein peptides; the pack and the storage condition set it. The retest period is written into the specification and backed by the stability file for that pack. Without a pack, a condition and a test panel, a number is a claim rather than a shelf life. At the end of the retest period, assay the retained sample again before extending use. Do not extend it because the powder still looks acceptable, and do not carry a bulk figure across to a repacked container. The standard packs are listed on the fish protein peptides page; the COA page covers the release tests; pack and lead time are on the MOQ page; the methods library holds the assay notes; the release workflow is on the quality page. ### 04 Fish protein peptides: MOQ, packs and quotation URL: https://nutrition.rainwoodbio.com/products/protein-collagen/fish-protein-peptides/moq/ Reviewed: 2026-11-19 The MOQ for fish protein peptides is 1 kg, supplied as a 1 kg foil pouch; the standard bulk pack is a 25 kg fiber drum. Lead time is 1–7 days for the standard pack. A firm quotation needs six details: the source and species, the specification, the quantity and pack, the destination and Incoterm, the documents, and the intended market. In one lineOne kilogram is the order unit because it is the smallest pack that can be sampled, tested and traced back to a lot. ## Why the minimum is 1 kg A 1 kg pack covers a bench-scale trial, a retained sample and an outside species or allergen test. The pouch can also travel by air without a pallet, which matters when a formulator needs material before the production plan is fixed. It is a traced commercial unit, not a scoop taken from a drum. Below 1 kg, the material is usually split from a larger lot and repacked. That adds handling, loses the original pack identity and makes traceability harder without changing the chemistry. The 25 kg drum is the bulk unit: less handling per kilogram, but more inventory and a longer storage period. The MOQ is a pack decision, not a volume target. ## Packs and formats Standard fish protein peptide packs | Format | Net weight | Where it fits | Handling | Foil pouch | 1 kg | Trial, sample, small batch | Moisture and light barrier; close it after opening | Fiber drum | 25 kg | Bulk production | Lined drum; one lot code across drum and liner | Granulated form | On request | Dust and flow | New particle profile; separate specification | Repack below 1 kg | On request | Bench trial only | Split from a bulk lot; not the catalog pack The catalog form is an 80 mesh powder: ≥95% through 80 mesh. Granulation is a different specification, not a packing choice. If the dosage form needs a coarser or freer-flowing powder, raise it before the quotation, because it changes the particle-size line and can change the lead time. ## Lead time and dispatch The standard pack is quoted at 1–7 days from order confirmation. That window covers picking, document preparation and dispatch; it does not include shipping transit, customs clearance or the customer's own quality release. A custom granulation or a repack adds time, and the quotation should state it separately. Ask for the dispatch date, not only the lead time. A 25 kg drum may travel on a pallet and a 1 kg pouch may travel as a parcel; the Incoterm decides who books the freight and who clears the entry. The documents should travel with the lot, not after it. ## What a quotation needs Six items make a quotation firm enough to compare: - Product and source. Fish protein peptides, with the species or species mix and the tissue named. - Specification. Protein factor and basis, peptide window, ash, moisture, mesh, heavy metals and microbiology. - Quantity and pack. The 1 kg pouch, the 25 kg drum, or a granulated form. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, specification, SDS, the fish allergen statement and the species or origin record. - Use and market. The application and the country where the finished product will be sold. A quotation without the source and the market is incomplete. The same powder can suit one destination and sit outside the file for another, and the paperwork is part of the offer. Commercial terms sit on the quotation, not on this page. ## The sample is a lot, not a demonstration Use the 1 kg pouch to qualify the material. Test protein and peptide, moisture, ash, microbiology and the fish allergen statement before scaling, and retain a sample from that same pack. The lot code on the sample, the COA and the quotation should match. A sample without a lot code demonstrates the powder; it does not qualify it. If a bench trial needs less than 1 kg, raise it before ordering. A split from a bulk lot is a repack with its own traceability record, not the catalog pack, and it should be documented as such. A bench split and a production drum may not share a lot. ## Terms to settle before the first order The quotation carries the commercial terms, Incoterm, pack, lead time and documents. The quality terms belong beside them: the specification revision, the COA per lot, the retained sample, the retest period and the change-control route. Settle a quality agreement before the first production order, not after a dispute. Returns and replacements are governed by the quotation and the quality agreement. A lot that fails the agreed specification should be handled through the retained sample and a joint re-test, not through a photograph of the powder. Agree who commissions the referee test and which laboratory both sides accept. Catalog values are on the fish protein peptides page; the COA page covers the release tests; the compliance page covers the allergen and market file; assay notes are in the methods library; the release workflow is on the quality page. ### 05 The regulatory file for fish protein peptides URL: https://nutrition.rainwoodbio.com/products/protein-collagen/fish-protein-peptides/compliance/ Reviewed: 2026-11-19 Fish protein peptides are a fish-derived ingredient, so the regulatory file has to answer two questions at once: whether the hydrolysate has a route in the destination, and how the fish allergen is declared. The buyer's regulatory team confirms the route for the finished product, the dose and the market. The supplier's file supplies the source, specification, lot data and allergen statement that the review depends on. In one lineThe specification defines the powder; the market file defines the route, the fish allergen declaration and the label. ## What the file has to answer A complete file has four jobs. It identifies the material and the specification revision; it ties the release to a lot and a certificate; it sets out the route, the limits and the label for the destination; and it records what happens when the source, process or pack changes. The certificate covers the lot, the technical data sheet covers the specification and the safety data sheet covers handling. The route is a separate question, answered by the buyer's regulatory team. Two documents matter more here than in a generic protein file. One is the allergen statement, naming fish in the form the destination requires. The other is the source record, with the species or mix, the tissue and the origin. A certificate that names no species cannot support a species claim on the label. ## European Union Novel food is the first EU question. Regulation (EU) 2015/2283 covers food that was not used for human consumption to a significant degree in the Union before 15 May 1997. Whether a given fish protein hydrolysate falls inside that definition turns on its history, so the buyer's team checks the novel food catalogue and the evidence for this exact material. This page asserts no status. The remaining references are Regulation (EU) No 1169/2011 (food information), Regulation (EC) No 1924/2006 (claims) and Commission Regulation (EU) 2023/915 (contaminants). Fish is in Annex II of the food-information regulation; the entry exempts certain fish gelatin uses as a processing aid, not a fish protein ingredient. Great Britain keeps its own register and labelling rules; Northern Ireland follows the EU list. Check the consolidated text, because these instruments are amended. ## United States The US review begins with the intended use and the basis on which the ingredient is sold. For a supplement, the ingredient is assessed under the Federal Food, Drug, and Cosmetic Act, as amended by DSHEA. A new dietary ingredient needs a 21 CFR 190.6 notification at least 75 days before marketing; the buyer's team decides whether that route applies. cGMP sits in 21 CFR 111 and labelling in 21 CFR 101. FALCPA lists fish as a major food allergen, and the declaration should name the fish species where the label makes that claim. A structure/function claim still needs substantiation, with a notification within 30 days of marketing under 21 CFR 101.93; a disease claim cannot be made for a supplement. The claims review stands apart from the lot certificate. ## Contaminants, allergens and the finished dose What the fish protein peptide file should show | Parameter | Catalog limit | Question for the file | Lead (Pb) | ≤3 mg/kg | Lot result, method and finished-product calculation | Arsenic (As) | ≤2 mg/kg | Total arsenic; whether the market requires speciation | Cadmium (Cd) | ≤1 mg/kg | Lot result and any category exception | Mercury (Hg) | ≤0.1 mg/kg | Lot result and method | Histamine | Not on the catalog panel | Risk-based test for susceptible species and cold-chain control | Microbiology | APC, yeast and mould, absence tests | Count and absence statement for the lot | Fish allergen | Declared | Statement on the specification and the label, with the species Contaminant limits are calculated on the finished product, not on the drum. The destination text and the daily dose set the limit, and a result that passes at 1 g/day may fail at 10 g/day. Arsenic and mercury deserve particular attention in a marine source, and histamine is the fish-specific hazard that a generic protein file does not cover. Ask whether the source monitors it and whether the lot can meet the destination criterion. ## Claims and the label No disease-related claim is made for this ingredient. In the EU, a health claim must appear in the authorised list, and a protein nutrition claim is worked out on the finished product, not the raw powder. “Peptide” describes a fraction; it is not an authorised claim, and the number behind it belongs in the specification if the label uses the word. In the US, the Supplement Facts panel names the ingredient, and a structure/function claim needs substantiation. “Fish-free” is not available for this product, and “hypoallergenic” is not supported by the file. The fish declaration is mandatory, not a marketing choice. The brand's reviewer owns the wording; the certificate cannot approve it. ## Documents to keep on file - Specification with the revision number, the species or species mix, the tissue, the nitrogen factor and the peptide window. - Certificate of analysis for the lot, with methods, limits and measured results. - Technical data sheet and safety data sheet. - Fish allergen statement, with the species named where the market expects it. - Origin record and, where a species claim is made, the supporting traceability or species test. - Heavy-metal, microbiology and histamine results where the destination or the customer requires them. - Nutritional data and the evidence for any claim the brand plans. ## Before the first order - The specification revision names the species or mix and the tissue. - The buyer's regulatory team has confirmed the route for the destination. - The fish allergen statement is on file and matches the lot and the label. - Contaminant results have been recalculated at the finished-product dose. - Label, nutrition panel and claim wording have had a market review. - Change control names the source, the process and the pack, and the quotation, specification and certificate cite one version. Start with the fish protein peptides page for the catalog; the COA page explains the lot certificate; the identity page covers the source evidence; the methods library holds the assay notes; the release file is described on the quality page. ### 06 How to prove a fish protein peptide lot is fish URL: https://nutrition.rainwoodbio.com/products/protein-collagen/fish-protein-peptides/identity/ Reviewed: 2026-11-19 A fish protein peptide lot is the named material when four measurements agree: the nitrogen figure with its factor, the peptide distribution with its window, the amino acid pattern including hydroxyproline, and the species record. The protein percentage alone cannot prove the source and cannot prove the peptide fraction. A collagen hydrolysate or a blend can be made to show a similar protein number. In one lineIdentity is the agreement between the nitrogen figure, the peptide distribution, the amino acid pattern and the species record, not the protein percentage alone. ## The identity layers Proving identity is cumulative: the document names the material, the nitrogen shows protein, the peptide method shows size, the amino acid data show protein type, and the species record shows the fish. Stopping at the first line describes the label, not the lot. Six layers of fish protein peptide identity | Layer | Question | Test | What it proves | Document | Are the source and species named? | Name, species, tissue, origin | The label, not the powder | Nitrogen | Is it protein-rich? | Kjeldahl with the factor stated | Nitrogen alone; says nothing about peptide size | Peptide | Is the fraction in the window? | HPLC with the chromatogram | The size fraction inside the window | Amino acid pattern | Is the protein fish, and is it collagen? | Amino acid analysis, hydroxyproline | A source and protein-type fingerprint | Species | Which fish? | Species PCR or a documented species chain | The species claim, not the tissue | Mass balance | Has it been extended? | Protein, ash and moisture together | Whether the figures add up ## The peptide-to-protein ratio and hydroxyproline Protein is calculated from nitrogen, and peptide is a fraction separated by HPLC. The two numbers describe different aspects of one powder, and peptide should not exceed protein. At the catalog limits and on the same basis, 70.0% peptide against 80.0% protein means at least 87.5% of the protein mass sits in the peptide window. A lot with 80% protein and 45% peptide is a different powder, however strong the protein line looks. Hydroxyproline is the collagen check. Muscle protein carries little of it; collagen carries 8–12%. A fish protein lot with a collagen-like figure is collagen or a blend, and a collagen lot with a low figure is not collagen. The specification should state the expectation instead of leaving the amino acid pattern to a brochure. The nitrogen factor belongs to the ratio discussion as well. A general food-protein factor of 6.25 is usual for fish muscle; collagen is calculated at 5.55. Using the collagen factor on a muscle hydrolysate understates the protein figure by about 11%, and using the general factor on collagen overstates it by about 13%. The certificate should name the factor and apply it consistently. Ash and moisture close the balance. At 80.0% protein, 10.0% ash and 7.0% moisture, about 3% remains for fat, carbohydrate and other material. A certificate showing 80% protein, 12% ash and 10% moisture does not add up before any species question. ## X-ray diffraction: what it can and cannot show Fish protein peptides are amorphous after drying, so X-ray diffraction is not a routine identity test. The pattern is a broad halo, and a bare “conforms” against an amorphous reference says almost nothing. XRD earns its place when the question is a crystalline carrier or a neutralisation salt; a sharp pattern means asking what crystalline material is present. When XRD is offered as identity evidence, request the pattern, the reference and the detection limit. It measures neither the peptide fraction nor the fish source. Use it as a supporting solid-state check; the nitrogen, peptide, amino acid and species data still carry the identity. ## What adulteration looks like Common fish protein peptide substitutions and the signals | Adulterant | What it does | Signal | Test | Fish collagen | Raises protein and changes the protein type | Hydroxyproline high; ash low; peptide curve different | Amino acid profile, hydroxyproline, SEC | Other protein | Raises nitrogen with a non-fish source | Amino acid pattern; allergen cross-contact | Amino acid profile, allergen tests | Free amino acids | Raises nitrogen without peptides | Peptide fraction falls while protein holds | HPLC distribution, amino acid analysis | Non-protein nitrogen | Raises Kjeldahl without peptide mass | Nitrogen high, peptide low, ammonia detected | Ammonia or urea screen, peptide HPLC | Maltodextrin or starch | Dilutes the powder | Protein and peptide both fall; sugar present | Mass balance, sugar profile | Water | Lowers the as-is protein | Moisture high; dry basis unchanged | Loss on drying | Other fish species | Species claim, not protein identity | Species result or traceability gap | Species PCR, origin record Colour proves the least. The off-white to light tan window covers many powders, blends included, and a fish note is normal for the material. The stronger signals are the peptide-to-protein gap, the hydroxyproline figure and the species record. A certificate that reports protein and appearance but no identity data has left the likeliest substitution unexamined. ## Writing identity into the specification - “Fish protein peptides; species or species mix, tissue and country of origin named.” - “Protein ≥80.0% by Kjeldahl; record the factor used and whether the percentage is as-is or dry.” - “Peptide ≥70.0% by HPLC; record the window and how the peak area was integrated.” - “Amino acid profile on file, with hydroxyproline reported by a validated method.” - “Species supported by a declaration and, where needed, a PCR result.” - “Fish allergen declared; ash ≤10.0%; moisture ≤7.0%; ≥95% through 80 mesh.” ## Five questions for the supplier - Which species or species mix and which tissue produced this lot, and are they on the certificate? - What are the nitrogen factor, the protein basis and the peptide molecular-weight window? - Will you release the peptide chromatogram and an amino acid profile that reports hydroxyproline? - How do the ash and moisture figures close the mass balance? - If the lot is disputed, will you re-test the retained sample jointly? Those five answers, in writing, are the identity file. The catalog is on the fish protein peptides page; the COA page maps each figure to its line on the certificate; the grades page covers the peptide and ash options; the fish versus collagen comparison covers the protein-type question; the methods library explains the separation; the release file is set out on the quality page. ### 01 What the COA for pea protein peptides actually contains URL: https://nutrition.rainwoodbio.com/products/protein-collagen/pea-protein-peptides/coa/ Reviewed: 2026-11-19 The certificate for a pea peptide lot reports appearance, identification by protein and peptide profile, protein by Kjeldahl, peptide content by HPLC, ash, moisture, particle size and the contaminant panel. Each line needs its method, its basis and the release limit, with the measured result in a separate column. The limits on this page are the catalog specification; the batch certificate is the document that describes a particular pack. In one lineA pea peptide certificate holds together only when the protein result names its factor and basis, the peptide result names its cut-off, and moisture plus ash account for the rest. ## Reading the certificate line by line A certificate is only as good as its audit trail. Each parameter needs the measurement, the method that produced it and the limit the lot was released against; a bare “conforms” leaves the reader taking the conclusion on trust. The material is a hydrolysate, so two rows carry the identity: the protein and peptide profile, which shows the source pattern and the size distribution, and the peptide content, which quantifies the fraction. Both need the method beside them. The catalog record carries no CAS number, because a peptide mixture is not a defined compound; identity rests on the source and the profile, as the identity page sets out. COA parameter list · pea protein peptides, catalog specification | Parameter | Method | Release limit | Appearance | Visual | Off-white to light tan powder | Identification | Protein and peptide profile | Conforms to the reference | Protein | Kjeldahl, N × 6.25 | ≥80.0% | Peptide content | HPLC peptide distribution | ≥70.0% | Ash | Gravimetric, furnace | ≤5.0% | Moisture | Loss on drying | ≤7.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; no E. coli or Salmonella detected | Particle size | Sieve analysis | ≥95% through 80 mesh ## Protein basis and peptide cut-off The Kjeldahl result is nitrogen; 6.25 is the general food factor applied on this page. A protein floor of 80.0% therefore sits on about 12.8% nitrogen. The factor is a convention, not a measurement, and a certificate that leaves it out can be set beside one that names it only by guessing. The basis is the second half of the figure. The pea isolate on this site is specified on a dry basis at ≤8.0% moisture; the peptide line is written as ≥80.0% by Kjeldahl without that qualifier, so the certificate has to state whether the result is as-is or dry. At 7.0% moisture the difference is 5.6 points: 80.0% on a dry basis is 74.4% as-is. Convert before comparing two offers, and convert again before writing a label. Peptide content comes from the HPLC distribution. Ask which column chemistry, cut-off and standard define the peptide fraction, because a wider cut-off counts more material as peptide. Free amino acids are not peptides; a method that includes them inflates the number without changing the powder. The peptide figure is also not a degree of hydrolysis, which counts the bonds cleaved. The two answer different questions, and the grades page keeps them as separate specification levers. ## Release limit against batch result The release limit is the boundary written into the specification; the batch result is what the laboratory measured. Both need to appear, in separate columns, with the method and test date beside them. A column that simply repeats the range copies the gate instead of reporting a measurement. What the result column should contain | Parameter | Release limit | Result column | Protein | ≥80.0% (basis stated) | A measured percentage, with the nitrogen result and the factor | Peptide content | ≥70.0% | A measured percentage, with the cut-off and the method | Ash | ≤5.0% | A measured percentage, with the furnace method | Moisture | ≤7.0% | A measured percentage, with the drying condition | Heavy metals | Per element | A measured figure in mg/kg for each element | Particle size | ≥95% through 80 mesh | The measured percentage through the sieve “Passes specification” is a verdict the reader should be able to reach from the numbers: a count plus an absence statement for microbiology, a figure per element for heavy metals, a percentage through the sieve for particle size. A single total for heavy metals hides the element that matters. ## What moves between lots Four upstream steps explain most of the variation. The pea — variety, season and soil — sets the protein and the mineral load. The hydrolysis sets the peptide distribution: enzyme, pH, temperature and time move the average chain length and the share below the cut-off. Neutralisation and washing set the ash; drying and milling set the colour, moisture and the percentage through 80 mesh. Ash is often read as an impurity when it is a process marker. Salts left from pH adjustment are ash, and a lot at the 5.0% ceiling is not the same powder as one at 2.0% even when both read 80% protein. Colour moves within the off-white to light tan window, and a darker lot is a reason to look at the batch record, not to reject on appearance alone. ## When an outside test earns its place An outside laboratory earns its place for a new source, a first regulated-market shipment, an unsupported label claim or a disputed lot. The useful panel is an amino acid profile for the source and the nitrogen, peptide distribution by HPLC, ash and moisture, ICP-MS for heavy metals, and a melamine screen by LC-MS/MS. Melamine and urea inflate Kjeldahl nitrogen without appearing in the peptide or amino acid results, so a protein figure alone does not exclude them. Add PCR for pea, soy, wheat and peanut if the source is disputed or the line is shared. A hydrolysate may carry little intact DNA, so a negative PCR is read with the process record rather than as proof of absence. Ask for the detection limit of each screen; a “not detected” line without a limit describes the method, not the sample. Chain of custody matters: what was tested must be what was kept, and the report must identify the lot. If a result is disputed, hand the referee the retained sample, the certificate and the specification, and ask which tests would separate the possible explanations instead of a repeat of the same assay. The quality page and the methods library cover the rest. ## Six lines to compare Put six lines side by side: protein with its factor and basis; peptide content with its method and cut-off; ash and moisture; the heavy-metal and microbiology results; the mesh and the pack; and the source, process and lot traceability. Two offers that agree on “80% protein” but differ on the peptide cut-off are not describing the same powder. The second layer is the process record: which pea, which enzyme, which hydrolysis time, which neutralisation and which drying step. A genuine certificate can still belong to a different drum, so the lot code must match across the COA, the pack and the retained sample. The catalog ranges are on the product page; the peptide arithmetic is on the identity page; the label and market questions are on the compliance page. ### 02 Pea peptide grades: peptide content, hydrolysis and form URL: https://nutrition.rainwoodbio.com/products/protein-collagen/pea-protein-peptides/grades/ Reviewed: 2026-11-19 Pea protein peptides are sold on three things that the word “peptide” does not fix: how much of the powder is peptide, how far the protein was hydrolysed, and which pea protein went into the reactor. The catalog grade is a powder at ≥80% protein and ≥70% peptide; granulation is a format change, while a different peptide floor or a different base protein is a separate specification. In one lineThe grade of a pea peptide is set by the peptide content, the degree of hydrolysis and the base protein behind it, not by the protein percentage alone. ## Why one name covers more than one powder Hydrolysis is a process, not a fixed product. A protease cuts the pea protein at its own preferred sites, and the enzyme, the pH, the temperature and the time decide how short the chains become. Two suppliers can both sell “pea peptides” and deliver powders that differ in peptide content, average chain length, ash, colour and bitterness. The name describes the route; the specification has to describe the powder. The base protein adds a second variable. An isolate base starts near 80% protein on a dry basis with little fibre and starch; a concentrate base carries more of both into the reactor, and that shows up in the colour, the carbohydrate by difference and the flavour. Neither is wrong, but they are not interchangeable in a formula, and the certificate should name which one was used. ## The levers that define a grade Pea peptide grade levers and what each one changes | Lever | Catalog position | What it changes | Peptide content | ≥70.0% by HPLC | The share of the powder in peptide form; the rest is intact protein, free amino acids, ash and moisture | Degree of hydrolysis | Can be agreed; report the method and the value | Average chain length, solubility, bitterness and osmolality | Base protein | Named in the specification | Fibre, starch, colour and flavour carried into the hydrolysate | Ash | ≤5.0% | Salts from neutralisation and minerals from the pea; affects taste and the label | Moisture | ≤7.0% | Flow, caking and the as-is protein figure | Particle size | ≥95% through 80 mesh | Dust, wetting and the fill on a capsule line Note the two numbers that are often confused. Peptide content is a mass fraction: 70% of the powder is peptide. Degree of hydrolysis is the share of peptide bonds that were cut, usually measured by OPA or TNBS. A powder can have a high peptide content and a modest degree of hydrolysis if the starting protein was already partly broken, or a lower peptide content and a high degree of hydrolysis if much of the nitrogen ended up as free amino acids. Ask for both, and for the method behind each. ## What the powder is like to handle The catalog form is an off-white to light tan powder at 80 mesh, soluble in water to a clear to slightly turbid solution. That solubility is the main physical difference from the isolate, which disperses but stays opaque. The peptide powder is hygroscopic; an open pouch in a humid filling room takes up water, cakes and loses flow. Plan the weigh-up and the hold time around a sealed container, not around a scoop left on the bench. Taste moves with the grade. Short hydrophobic peptides are bitter, and pea brings its own green and beany notes; a higher degree of hydrolysis usually means more bitterness alongside the better solubility. Colour is lighter in a well-washed isolate-based hydrolysate and deeper when a concentrate base or a higher ash is carried through. Neither property is captured by the certificate, which is why a sample at the intended dose belongs in the qualification. ## The arithmetic at the dose Dose arithmetic starts from the as-is protein figure, not the peptide figure. At 80.0% protein as-is, 25 g of powder delivers 20.0 g of protein, of which at least 17.5 g is peptide at the 70.0% floor. If the 80.0% is on a dry basis at 7.0% moisture, the same 25 g delivers 18.6 g of protein and 17.5 g at the peptide floor. The difference between those two answers is the basis, not the powder. The peptide number is not a substitute for the protein number on a label. A nutrition panel declares protein, and a claim is calculated from the protein figure; the peptide content describes the ingredient's composition. Keep the two lines separate in the specification and in the label review, and let the peptide against isolate comparison carry the cross-product arithmetic. ## Lines the specification must fix - The material and the route: pea protein peptides, an enzymatic hydrolysate of pea protein, with the base protein named. - Protein, with the factor and basis: ≥80.0% by Kjeldahl, N × 6.25, as-is or dry basis stated. - Peptide content, with the method and the cut-off: ≥70.0% by HPLC distribution. - The degree of hydrolysis, if the formula depends on solubility or taste, with the method named. - Ash ≤5.0%, moisture ≤7.0% and ≥95% through 80 mesh, each with its method. - Heavy metals and microbiology as listed, and the allergen and cross-contact statement for pea and any shared line. Granulation is written as a format, not a grade: it changes the particle size, the flow and the dust, and it is quoted as a separate line. A diluted powder is a different specification again, because the carrier changes the protein and peptide percentages and the label. The catalog limits are on the product page; the certificate lines are on the COA page. ## When a peptide is the wrong grade Choose the isolate instead when the formula needs gelation, a mild taste or a white powder, or when the label should read “pea protein isolate” rather than a hydrolysate. Choose a concentrate when fibre and starch are wanted and the protein density can be lower. The peptide is the practical choice when solubility at high solids or near the isoelectric point matters, and when the flavour system can carry its bitterness. The switch is not a drop-in. Protein basis, ash, taste and label name all move, and the pea protein isolate page carries the other side of the comparison, while the soy protein isolate page carries the other legume. The quality page describes how the specification is released against the certificate. ### 02.1 Pea protein peptides vs pea protein isolate: what hydrolysis changes URL: https://nutrition.rainwoodbio.com/products/protein-collagen/pea-protein-peptides/grades/pea-peptides-vs-pea-protein/ Reviewed: 2026-11-19 Both products start from yellow pea. The isolate is intact protein, separated to a floor of 80% on a dry basis and spray-dried; the peptide is that protein cut by enzymes into shorter chains, specified at ≥80% protein and ≥70% peptide. The differences that decide the application are solubility, viscosity, taste, ash, the analytical method and the name on the label — not the protein number alone. In one lineHydrolysis keeps the pea and changes the molecule: the peptide powder dissolves further, tastes more bitter and carries a different name and specification from the isolate. ## Two products, side by side Pea protein peptides and pea protein isolate compared | Point | Pea protein peptides | Pea protein isolate | Protein | ≥80.0% by Kjeldahl | ≥80.0% on a dry basis, N × 6.25 | Peptide content | ≥70.0% by HPLC | Not a specification line; the protein is largely intact | Process | Extraction, hydrolysis, inactivation, clarification, drying | Alkaline extraction, isoelectric precipitation, wash, drying | Ash and moisture | Ash ≤5.0%; moisture ≤7.0% | Ash ≤5.0%; moisture ≤8.0% | Solubility | Soluble; clear to slightly turbid solution | Dispersible; opaque, no clear solution | Taste and colour | More bitter and beany; off-white to light tan | Milder; light yellow to cream | Viscosity at high solids | Usually lower at the same protein solids | Higher; thickens and can gel | Ingredient name | Hydrolysed pea protein or pea protein peptides | Pea protein isolate The table is the short version. The rest of this page takes the four differences that change a formula, and then the two that change the label and the choice. ## What hydrolysis does to the protein An isolate is made by dissolving pea protein at alkaline pH, precipitating it near its isoelectric point, washing and drying. A peptide adds a hydrolysis step: an enzyme, a controlled pH and temperature, a hold time, then inactivation and clarification before drying. The enzyme and the hold time set the degree of hydrolysis, and that sets the average chain length and the share of the powder below the peptide cut-off. Hydrolysis also changes what the powder carries. pH adjustment leaves salts, so ash is a process line rather than an impurity. A concentrate base brings fibre and starch into the reactor, and they survive into the powder. The grades page keeps peptide content, degree of hydrolysis and base protein as separate levers, because a higher peptide number can come from a longer hydrolysis or from a wider cut-off, and the two are not the same powder. ## Solubility, clarity and viscosity This is the difference most formulas are built on. The isolate disperses in water but does not dissolve to a clear solution; it is opaque, and near its isoelectric point, around pH 4.5, it is least soluble and most likely to sediment. The peptide usually dissolves across a wider pH range, including near that point, and gives a clear to slightly turbid solution at the catalog specification. For a clear or lightly coloured drink, that is the property that decides the ingredient. The same change usually lowers viscosity at a given protein solids, because shorter chains interact less and do not build the network that gels an isolate. A stick pack or a high-protein drink can therefore carry more protein solids before it turns thick. The trade is osmolality: hydrolysis raises the number of particles in solution, and a concentrated peptide drink can be more osmotic than the same protein weight as isolate. That is a formulation measurement, not a label claim. ## Bitterness, colour and the flavour system Hydrolysis exposes hydrophobic residues that were buried in the intact protein, and those peptides taste bitter. Pea also carries green and beany notes from its own lipids and volatiles. The isolate is milder, which is why it is the easier starting point for a neutral-tasting bar or a plain shake; the peptide is the harder one, and the flavour system has to carry it. Three levers move the taste: the base protein, the enzyme and the degree of hydrolysis, and the flavour system. A well-washed isolate base gives a lighter colour; a concentrate base or a high ash gives a deeper, more savoury powder. Colour runs from off-white to light tan in the peptide and from light yellow to cream in the isolate, and both darken with heat and moisture. Qualification at the intended dose, in the intended matrix, is the only reliable test of whether the bitterness is acceptable. ## Protein, peptide and the number on the label The two products are not dosed on the same arithmetic. For the isolate, the label figure is protein, and at 80.0% on a dry basis and 8.0% moisture the as-is protein is 73.6%; 25 g delivers 18.4 g of protein. For the peptide, the catalog protein is ≥80.0% by Kjeldahl without a stated basis; if that is as-is, 25 g delivers 20.0 g of protein, and at the 70.0% peptide floor 17.5 g of that is peptide. If the 80.0% is on a dry basis at 7.0% moisture, the same 25 g delivers 18.6 g of protein. The peptide figure is not added to the protein figure. It is a fraction of the same powder, and a label that declares both as if they were separate contributions overstates the serving. The arithmetic and the basis belong in the specification, and the COA page shows how the certificate reports them. ## The label and the specification The ingredient name changes with the process. The isolate is declared as pea protein isolate; the hydrolysate is declared as hydrolysed pea protein, pea protein hydrolysate or pea protein peptides, depending on the market's naming rules and the buyer's regulatory review. The two names are not interchangeable on a label, even though both start from the same pea. The source declaration is the same on both sides, because hydrolysis changes the molecular size, not the botanical source. Whether a hydrolysate is less allergenic than the intact protein is a separate question that only an allergenic risk assessment can answer; it is not settled by the peptide percentage. The compliance page sets out the documents and the claim rules. ## Choosing between them Choose the isolate when the formula needs gelation, a mild taste, a white powder or a protein-fortified bar, and when the label should carry the isolate name. Choose the peptide when solubility at high solids or near the isoelectric point matters, when a clear or lightly turbid drink is the target, or when a stick pack needs to carry more protein without thickening. The peptide's bitterness and ash are the constraints to check first. Neither is a drop-in for the other: the protein basis, the ash, the taste, the viscosity and the label name all move. Keep the specification on the same side as the label, and confirm the destination route before the first order. The product page carries the peptide limits; the pea protein isolate page carries the intact-protein limits; the soy protein isolate page is the counterpart if the source is still open; the methods library covers the tests, and the quality page the release file. ### 03 Pea protein peptides are hygroscopic; the pack sets the shelf life URL: https://nutrition.rainwoodbio.com/products/protein-collagen/pea-protein-peptides/stability/ Reviewed: 2026-11-19 Pea protein peptides are hygroscopic, and the powder browns when moisture and heat meet residual sugars. Sealed in the foil pouch at a controlled temperature, the material holds its specification; opened in a humid room, it cakes and darkens. An aqueous solution is less stable than the powder, and the pack and the storage condition decide the shelf life that can be assigned. In one linePea peptides are hygroscopic and prone to browning, so the moisture limit, the seal and the storage temperature decide the shelf life. ## The powder: moisture, caking and browning The moisture limit is ≤7.0%. That is a release gate, not a storage allowance. Peptide powders take up water quickly because the shorter chains expose more polar groups, and the water softens the particle, bridges the grains and turns a free-flowing powder into a cake. The same water feeds the browning reaction between peptides and any residual reducing sugar, which shows as a darker colour and a changed flavour before it shows on any certificate. Keep the pouch sealed, keep the store cool and dry, and let a cold pack equilibrate to room temperature before opening so that condensation does not form on the powder. A desiccant helps in a humid filling room but is not a substitute for a seal. Record the date of opening and the in-use period; a folded-over foil pouch is not a closed pack. ## The solution: soluble, and less forgiving The catalog solubility is “soluble in water; the solution is clear to slightly turbid”. That behaviour is the reason the peptide is used in stick packs and drink mixes, and it is also why the solution is the less stable format. In water, heat, oxygen, pH and light act together, and a beverage process adds a pasteurisation or hot-fill step that the powder never sees. A clear drink also shows every change: a haze, a colour shift or a sediment is visible in a way that a capsule never reveals. If a liquid is unavoidable, control the pH, keep dissolved oxygen low, protect the pack from light and prove the hold time before filling. Data from the bulk powder will not carry over to a drink: the matrix, the process and the pack each shift the rate. ## What drives the change Factors that move pea peptides during storage | Factor | What it does | Control | Moisture | Caking, loss of flow, higher water activity | Sealed pouch; dry store; desiccant where needed | Heat | Accelerates browning and moisture damage | Controlled store; cool process | Residual sugars | Browning with peptides; colour and flavour change | Specify the carbohydrate fraction; control drying | Oxygen | Oxidation of peptides and lipids; off-notes | Low headspace; sealed pack; antioxidant if the formula allows | pH | Changes solubility, clarity and browning rate | Validate the matrix pH; buffer if needed | Light | Colour fade or darkening in solution | Opaque or foil pack; dark store | Metal ions | Haze and colour in solution | Avoid iron and copper contact These factors interact. A warm, humid store is worse than the sum of moisture and heat alone, and a clear bottle on a windowsill combines light, oxygen and heat. The useful stability question is not whether pea peptides are stable, but which pack, at which condition, for how long. ## Setting up a stability protocol A useful protocol states the pack, where it is stored, when it is sampled and what is measured. Warehouse conditions are covered by 25 °C/60% relative humidity long-term and 30 °C/65% intermediate; 40 °C/75% accelerated storage puts the pack under stress. Add a light-exposure arm where colour matters, and a humidity challenge for a pouch that will be opened repeatedly. Test protein, peptide content, moisture, appearance, solubility and microbiology at each point. For a stick pack or a beverage, repeat the work in the matrix at the process pH and heat load, and measure clarity as well as assay. Ask for the individual results rather than a pass verdict, with the pack and the lot family named. The summary should belong to the pack you will buy; the headspace and opening history of a 25 kg drum differ from those of a 1 kg pouch. ## The finished formula moves the answer A tablet or capsule runs at low water activity, yet its shell and excipients can still pass moisture; check the fill for caking and colour at release and after storage. In a stick pack the seal and the foil are the barrier, and a pinhole can fail without showing up in the powder result. A beverage combines heat, pH and oxygen, and a bar adds a water activity that can drive browning even at a moderate moisture. Whether to add an overage is the formulator's call, and it is a label and stability question; it will not rescue a pack that admits moisture. Keep the peptide content and the protein figure on the specification through the shelf life, not only at release, because the two can drift with moisture. ## Where the shelf-life figure comes from We do not publish a single shelf-life number for pea protein peptides, because the pack and the way it is stored both determine it. The retest period is written into the specification and backed by stability data for that pack. A figure quoted without a pack, a storage condition and a test panel is a claim, not a shelf life. At the end of the retest period, test the retained sample again before extending use. Do not extend on assumption, and do not transfer a bulk figure to a container that was repacked. The product page lists the standard packs. Release tests sit on the COA page, pack sizes and lead time on the MOQ page, and the release workflow on the quality page. ### 04 Pea protein peptides: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/protein-collagen/pea-protein-peptides/moq/ Reviewed: 2026-11-19 Pea protein peptides ship at a 1 kg minimum in a foil pouch, with a 25 kg fiber drum as the bulk pack. Quoted lead time for the standard powder is 1–7 days, and a firm offer needs six details: the material, the specification, the pack and quantity, the destination and Incoterm, the paperwork, and the market where it will be sold. In one lineThe 1 kg pouch is the minimum because it is the smallest unit that can carry its own lot code, certificate and retained sample. ## Why one kilogram is the minimum Small enough to air-freight and large enough to test, a 1 kg pack can supply a bench trial, a retained sample and an outside laboratory from one lot. It also travels with its own code, so the certificate can be tied to the bag that arrived. Splitting below 1 kg means repacking from a larger lot: more handling, a new identity and a weaker traceability chain, with the same chemistry inside. The 25 kg drum exists for production. Handling per kilogram falls, but stock and storage time rise, and a hygroscopic powder left open in a humid room is a liability rather than a bargain. The minimum is a property of the pack, not a sales threshold. ## Packs, formats and pack identity Standard pea protein peptide packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal or transfer after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Particle profile and bulk density change The catalog powder passes ≥95% through 80 mesh. Granulation is a separate particle specification, not a different bag: flow, dust, wetting and capsule fill weight all move, and it is quoted on its own line. If the filling line cannot run the 80 mesh powder, say so before the quotation; a coarser or granulated grade changes the particle specification. ## How the lead time is built Quoted lead time for the standard pack is 1–7 days from order confirmation. Picking, paperwork and dispatch sit inside that window; freight transit, customs and the buyer's own quality release do not. A custom granulation or a non-standard pack needs extra time, listed separately on the quotation. Ask when the lot will leave, not only how long the lead time is. A drum usually moves on a pallet, a pouch as a parcel, and the Incoterm fixes who books the freight and who clears the entry. Paperwork should move with the consignment rather than follow it. ## Six items for a firm quotation Six items make a quotation firm enough to compare: - Material and source. Pea protein peptides, with the base protein and the hydrolysis route named. - Specification. Protein with its factor and basis, peptide content with its method and cut-off, ash, moisture and mesh. - Quantity and pack. One pouch, one drum, or a granulated grade. - Destination and Incoterm. The destination country, the port or address, and the agreed trade term. - Documents. COA, specification, SDS, allergen and GMO statements, and any market-specific declaration. - Intended use and market. Whether it is a supplement, a food or another use, and where it will be sold. A quotation that leaves out the market or the base protein cannot be compared properly. One powder may fit a destination while falling outside its file, and the paperwork is part of what is being bought. Commercial terms appear on the quotation, not here. ## The sample should carry a lot code Use the 1 kg pack for qualification. Test protein, peptide content, ash, moisture and microbiology before scaling up, and keep part of the same pack as the retained sample. The lot code must be identical on the sample, the certificate and the quotation; without that link the material is only a demonstration. If a bench trial needs less than a kilogram, ask before ordering. Repacked material from a larger lot carries a new traceability chain, and it should be labelled as a repack rather than presented as the catalog pack. A bench sample and the production drum are not guaranteed to share a lot. ## Terms to settle early The offer fixes the trade terms, the Incoterm, the pack size, the delivery window and the paperwork. Quality terms belong alongside: the specification revision, a certificate for each lot, the sample kept on file, the retest interval and the change-approval route. Agree a quality agreement before the first production order rather than after the first disagreement. Returns and replacements follow the offer and the quality agreement. If a lot misses the agreed specification, resolve it through the retained sample and a joint re-test rather than a photograph. Agree in advance who pays for the referee laboratory and which one both sides accept. The product page carries the catalog specification. Release tests are listed on the COA page, market files on the compliance page, and the term itself in the MOQ glossary entry. The quality page describes the release file. ### 05 The regulatory file for pea protein peptides URL: https://nutrition.rainwoodbio.com/products/protein-collagen/pea-protein-peptides/compliance/ Reviewed: 2026-11-19 Pea protein peptides are a processed plant protein ingredient, and the regulatory file is built from four things: the specification being bought, the certificate for the lot, the allergen and contaminant data, and the route the destination market allows. Pea has a long history of use as a food, but this page does not assert a novel-food, NDI or permitted-ingredient status for the hydrolysate; the buyer's regulatory team confirms the route for the destination. In one lineThe specification defines the powder; the market file shows which route, limits and label apply where it will be sold. ## The four questions a file answers A practical file answers four questions. What exactly is being bought, down to the specification revision? Which lot is in the pack, and what did the certificate measure on it? Which contaminant and labelling rules apply once the material is in a finished product? And what has to be re-checked if the source, the process or the packaging changes? The lot is covered by the certificate, the parameters by the technical data sheet, and handling by the safety data sheet. None of the three settles the market route. Allergen and GMO declarations, the origin record, a residual-solvent statement and any customer-specific declaration belong in the same folder. If a declaration is missing for the lot, name the gap before the order rather than at the port. A dated list of documents is easier to audit than a folder of undated PDFs. ## European Union In the EU, the file rests on three things: the specification, the contaminant results and the label. General food law (Regulation (EC) No 178/2002), the food information rules (Regulation (EU) No 1169/2011), the contaminant regulation (Commission Regulation (EU) 2023/915) and the nutrition and health claims regulation (Regulation (EC) No 1924/2006) apply alongside any product-specific route, and the current consolidated text is the reference rather than a summary. The buyer's regulatory team decides which route applies in the destination member state and checks that the specification fits the material actually placed on the market. Pea is not named in Annex II of the food information regulation as of this review, so the mandatory allergen list does not include it; the declaration still has to be truthful about the source and about cross-contact with the cereals, soy, peanut or other proteins on a shared line. Great Britain applies its own food information rules and register, and Northern Ireland follows the EU framework; the two are checked separately. ## United States In the US, the file turns on the identity of the dietary ingredient or food substance and on how it will be used. For a conventional food, the Federal Food, Drug, and Cosmetic Act, 21 CFR 117 and the labelling rules in 21 CFR 101 apply; for a supplement, the dietary-ingredient route under DSHEA and the 21 CFR 111 manufacturing rules apply, and the supplier should name the basis and show the document behind it. The buyer checks that this basis extends to the finished product and to the claim. Pea is not one of the major food allergens named in US law as of this review, but the label still declares the source and the shared-line controls. The ingredient name matters. A hydrolysed protein is described as such on the label rather than as the intact isolate, and the spelling and order of the words follow the destination's rules. The label and the claim get their own review, separate from the certificate. ## Contaminants in the finished dose Contaminants have to be calculated at the finished dose, not only measured in the drum. The table is a starting point for a supplement file; the destination's current text and the daily dose fix the final figure. Contaminant limits to confirm for the finished product | Parameter | Typical supplement reference | What the file should show | Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method, limit and the finished-product calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception that applies | Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result and method | Arsenic (As) | Customer or market limit | The agreed limit and the method, stated on the certificate Plant proteins carry the metals their soil carried, so a pea lot is not exempt from the panel because it is not a mineral ingredient. Arsenic is not harmonised for supplements at EU level as of this review; the buyer's own limit belongs in the specification, with the method and the detection limit. Convert the drum result to the finished dose: a lot result is judged against the supplement limit, not against the raw-material weight. ## Labels and permitted claims The protein content supports a nutrition claim only when the finished product meets the condition attached to that claim. In the EU, “source of protein” and “high protein” have energy-based conditions in Regulation (EC) No 1924/2006; in the US, “good source” and “high” or “excellent source” have daily-value conditions in 21 CFR 101.54. The peptide content is a compositional descriptor, not a nutrition claim, and it does not carry a permitted claim of its own. No disease-related claim is made for this material, and none should be built on the certificate. The claim review belongs to the brand's regulatory reviewer, who checks the wording against the product, the form and the market. A certificate does not authorise a claim, and a claim does not alter the specification. ## The document set Documents that belong in the pea peptide file | Document | What it shows | Who provides it | Specification | The parameters, methods and limits being bought | Supplier, agreed with the buyer | COA | The lot result against that specification | Supplier, per lot | SDS | Handling, dust and storage hazards | Supplier | Allergen statement | The source and the shared-line controls | Supplier, per site | GMO and origin statements | The source of the pea and the processing route | Supplier | Residual-solvent statement | What the extraction and hydrolysis used | Supplier | Nutrition and amino acid data | The protein and the profile behind it | Supplier or laboratory Version numbers and dates belong on the list. A specification without a revision, or a COA without a lot code, cannot be tied to the pack that arrives. ## Checks before the first order - The specification version, the base protein and the hydrolysis route are named. - The certificate, specification, SDS, allergen, GMO, origin and solvent declarations are on file. - The metals are recalculated at the daily dose. - The label name, the allergen declaration and the claim have been reviewed for the destination. - A change of source, process or pack goes through change control. - Offer, specification and certificate all point to one revision. The product page carries the catalog specification; the identity page covers the analytical evidence; the COA page explains the lot certificate; the EU regulatory note and the US note give the framework references; the quality page describes the release file. ### 06 How we prove a pea peptide lot is hydrolysed pea protein URL: https://nutrition.rainwoodbio.com/products/protein-collagen/pea-protein-peptides/identity/ Reviewed: 2026-11-19 A lot is pea protein peptides when four things agree: the source is pea, the nitrogen figure supports the protein claim with its factor and basis, the HPLC distribution shows the peptide fraction, and the ash and moisture close the mass balance. The peptide percentage on its own is the weakest evidence, because a blend or a non-protein nitrogen source can lift a number without making a peptide. In one lineA pea peptide lot is what it claims when the source, the peptide distribution, the nitrogen arithmetic and the mass balance agree. ## Four layers, four questions Four layers of pea peptide identity | Layer | Question | Test | What it proves | Document | Is the material and source named? | Name, base protein, process record | Paperwork only | Protein | Does the nitrogen match the claim? | Kjeldahl, N × 6.25, with the basis | The nitrogen, not the source | Peptide | How much is in peptide form? | HPLC distribution against the cut-off | The size fraction | Balance | What else is in the powder? | Ash, moisture, amino acid profile | Consistency of the numbers The first layer is necessary and never sufficient. The second measures nitrogen, and nitrogen arrives with protein, with free amino acids and with non-protein nitrogen. The third is the layer that separates a hydrolysate from an isolate. The fourth is where a dilution or a salt load shows up. ## The ratios and the nitrogen arithmetic At N × 6.25, an 80.0% protein figure sits on about 12.8% nitrogen. The peptide floor of 70.0% against that protein floor gives a peptide-to-protein ratio of 0.875: at the catalog limits, at least 87.5% of the protein is in peptide form, and the rest is intact protein, free amino acids or material counted differently by the method. If a certificate reports peptide content above protein content, the two figures are not on the same basis or one of them is wrong, and the chromatogram should be read before the lot is accepted. The ash and moisture limits close the arithmetic. At 80.0% protein, 5.0% ash and 7.0% moisture, 92% of the powder is accounted for, leaving at most about 8% for fat, fibre, sugars and other solids. A lot that reports 80% protein and 5% ash but leaves 20% unaccounted for is either carrying a large carbohydrate fraction or has a nitrogen figure that is not all protein. The protein-to-ash ratio at the limits is 16:1; a much higher ratio with a high protein figure points to a washed isolate base, and a much lower one to neutralisation salts or a dilution. Free amino acids are the other part of the ratio. Hydrolysis produces some, and they count as nitrogen but not as peptide. Ask for the free amino acid figure or the amino acid profile, and read a large free fraction as a composition fact rather than a defect; it changes the taste and the osmolality, and it belongs in the specification if the formula depends on it. ## What X-ray diffraction can and cannot settle A spray-dried peptide powder is amorphous, so its X-ray diffraction pattern is a broad halo with no sharp reflections. That is consistent with the drying route, and it is not a source test: an isolate, a hydrolysate and a blend of the two can all give the same halo. XRD is useful when a crystalline phase appears — a sugar alcohol carrier, a crystalline amino acid, an inorganic salt or, at a high enough level, a crystalline adulterant such as melamine. The detection limit matters, and a “no crystalline phase” statement without the pattern and the limit adds little. For identity, the stronger combination is the amino acid profile, the peptide distribution and the mass balance. XRD and FTIR answer the solid-state and functional-group questions, and they are supplementary. The XRD method note sets out the technique; the methods library covers the rest. ## What substitution looks like Substitution routes for pea peptides and the signals | Route | What it changes | Test that catches it | Non-protein nitrogen | Kjeldahl up; peptide and amino acid sums unchanged | Amino acid profile, melamine by LC-MS/MS | Free amino acid spike | Peptide content down; nitrogen up; taste shifts | Peptide distribution, free amino acid analysis | Whey, soy or collagen blend | Amino acid pattern moves; foreign protein present | Amino acid profile, ELISA or PCR where the matrix allows | Maltodextrin or starch | Protein and peptide down; carbohydrate by difference up | Mass balance, XRD for crystalline starch | Salt or neutralisation load | Ash high; protein and peptide diluted | Ash, conductivity, mineral panel | Excess water | Moisture above limit; caking; as-is protein down | Loss on drying, water activity The first route is the safety-critical one: melamine and urea raise the nitrogen figure without raising the peptide or amino acid result. The second and third are commercial substitutions that can pass a protein floor while failing the peptide or source claim. The last is the ordinary storage failure that a retained sample catches before a customer does. ## Lines the specification must carry - The material, the base protein and the hydrolysis route: pea protein peptides, an enzymatic hydrolysate of pea protein. - Protein, with the factor and basis: ≥80.0% by Kjeldahl, N × 6.25, as-is or dry basis stated. - Peptide content, with the method and the cut-off: ≥70.0% by HPLC distribution. - Ash ≤5.0%, moisture ≤7.0% and ≥95% through 80 mesh, each with its method. - An amino acid profile and a non-protein nitrogen or melamine screen where the risk exists. - The allergen and cross-contact statement for pea and any shared line, and the destination market. ## Five questions to put to the supplier - Which factor and basis does the certificate use, and is the raw nitrogen result printed next to the protein figure? - Which HPLC method and molecular-weight cut-off define the peptide content, and can the distribution be provided? - What is the ash result, and how much of it comes from neutralisation? - Has the lot been screened for melamine or another non-protein nitrogen source, and at what detection limit? - Does the retained sample carry the same lot code as the pack, and will the supplier accept a joint re-test? Five direct answers amount to an identity file; a single protein percentage does not. The product page carries the catalog limits; the COA page maps each figure to its certificate line; the grades page covers the peptide levers; the quality page describes the release file. ### 01 What the COA for peanut protein peptides actually contains URL: https://nutrition.rainwoodbio.com/products/protein-collagen/peanut-protein-peptides/coa/ Reviewed: 2026-11-19 A peanut protein peptide certificate reports appearance, protein by Kjeldahl, peptide by HPLC, ash, moisture, heavy metals, microbiology and particle size. Protein and peptide each need their method, the nitrogen factor and basis for protein and the HPLC cut-off for peptide, and the allergen statement belongs on the same document. In one lineA peanut peptide COA is read as agreeing measurements: protein with its nitrogen factor and basis, peptide with its HPLC cut-off, ash beside sodium, and a peanut allergen statement that matches the pack. ## The certificate as a test report A certificate earns its place when each line can be checked: the parameter, the analytical method, the release limit and the measured result. “Conforms” on its own is a verdict without the working. Composition, contaminants and physical parameters · peanut protein peptides, catalog limits | Parameter | Method | Release limit | Appearance | Visual | Off-white to light tan powder | Protein | Kjeldahl | ≥80.0% | Peptide content | HPLC peptide distribution | ≥70.0% | Ash | Gravimetric, furnace | ≤5.0% | Moisture | Loss on drying | ≤7.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh | Peanut allergen | Document review | Peanut declared; source named Comparability starts with the method column: Kjeldahl protein and HPLC peptide are not the same kind of number, and the allergen line is a document check rather than an analytical result. ## The nitrogen factor, the peptide cut-off and the basis Kjeldahl measures nitrogen and multiplies it by a factor. Peanut protein is customarily calculated with 5.46, while the general 6.25 factor is also used. On the same nitrogen result, 6.25 reports about 14% more protein than 5.46; an 80.0% figure by 6.25 is about 69.9% by 5.46. The factor must be printed beside the figure, because two certificates on different factors do not describe the same powder. The basis is the second half. The catalog sets protein at ≥80.0% and moisture at ≤7.0%; a dry-basis result of 80.0% at the moisture ceiling is about 74.4% as-is, a material difference at a release gate. The certificate should state the basis. Peptide content is a separate measurement. The HPLC distribution separates the peptide fraction from larger proteins, free amino acids and salts, and the result depends on the cut-off. The peptides are part of the protein, so 80% protein and 70% peptide do not add to 150%; at the minima the peptide fraction is at least 87.5% of the protein figure on the same basis. The gap holds free amino acids and non-peptide solids. Ash is the mineral load. pH adjustment during extraction and hydrolysis leaves salt on neutralisation; ash near 5.0% with high sodium is consistent with salt, while high ash with low sodium points to another mineral source or a carrier. Moisture at ≤7.0% is a release gate, not a storage allowance, and it moves the as-is figures. The allergen statement should name the source and the allergen, not only say “allergen: see label”. Hydrolysis changes the protein profile, not the source; the declaration follows the peanut. ## Release limit, catalog range and lot result A catalog range describes what the grade is sold to meet, a release limit is the tighter gate agreed for a customer or market, and the lot result is what the laboratory actually found. The first two are promises; the last is evidence. What the result column should contain | Parameter | Catalog limit | Result column | Protein | ≥80.0% | A measured percentage with the factor and the basis | Peptide | ≥70.0% | A measured percentage with the HPLC cut-off and integration range | Ash | ≤5.0% | A measured percentage, with sodium if the salt load is in question | Moisture | ≤7.0% | A measured percentage | Heavy metals | Per element | A figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot | Particle size | ≥95% through 80 mesh | The measured percentage through the sieve If the result column simply restates the limit, the certificate has not reported a measurement. Microbiology needs a count and an absence statement; heavy metals need one figure per element. The allergen statement is a controlled document and should carry a version and the lot. ## What moves between lots The raw material is peanut, and peanut is agricultural. Variety, region and season move the protein, ash and aflatoxin risk, and hydrolysis can only work with what arrives. A different crop year is not a process change, but it can move the colour and the peptide distribution. The hydrolysis step moves the peptide figure. Enzyme choice, dose, time, pH and temperature set the degree of hydrolysis; a longer or more active hydrolysis shifts the distribution toward smaller peptides and can raise the peptide content while the protein figure stays inside its window. The same step can raise bitterness and, where pH is adjusted, the salt load. Drying moves moisture, colour and flow, and milling moves the sieve result. Colour is the least numerical line, and it can still be informative. Off-white to light tan leaves room; a darker shade inside that range is not an identity failure. It can, however, point to a hotter dryer, a longer hold or a Maillard reaction while the protein figure passes. Check that the lot code on the certificate appears on the pouch, the drum and the retained sample. ## When an outside test earns its fee An outside test is worth ordering for a new source, a first shipment into a regulated market, or a result the supplier and buyer cannot agree. Repeat only what answers the open question: protein with its factor at a second laboratory, peptide by HPLC with the cut-off, amino acid profile, ash and sodium, heavy metals, microbiology, and aflatoxin B1 and total. Aflatoxin sampling is easy to get wrong. Contamination is not evenly distributed through a peanut lot, so a small grab sample can miss a hot spot. Ask for the sampling plan, sample size and detection limit. Ochratoxin A belongs where the destination sets a limit. For identity, add peanut-specific PCR or an ELISA for a peanut allergen. A negative ELISA after hydrolysis does not prove the material is not peanut-derived; the epitope may have been cleaved. The declaration follows the source. The laboratory should test the retained sample, and the report should name the lot. ## What to compare between suppliers Put seven lines side by side: protein with its factor and basis; peptide with the HPLC method and cut-off; ash with sodium; moisture and particle size; aflatoxin results with the sampling plan; the peanut allergen statement; and traceability from certificate to pack. Two quotations can both say 80% protein and still describe different powders if the factor or the peptide method differs. The protein and peptide figures separate the grade from intact peanut protein; ash and sodium show the salt load; aflatoxin separates a controlled lot from an uncontrolled one. The catalog specification is listed on the peanut protein peptide product page. The identity page explains the tests that separate the peptide from the parent protein; the HPLC method note covers the separation; the quality page describes release. ### 02 Peanut protein peptides: which grade to specify URL: https://nutrition.rainwoodbio.com/products/protein-collagen/peanut-protein-peptides/grades/ Reviewed: 2026-11-19 Peanut protein peptides are specified on two numbers and one physical form: protein, peptide content and particle size. The catalog grade is ≥80.0% protein by Kjeldahl, ≥70.0% peptide by HPLC, ≤5.0% ash, ≤7.0% moisture and ≥95% through 80 mesh. A different grade moves one of those lines; it does not change the source, and it does not remove the peanut allergen. In one lineThe peanut peptide grade is set by the protein figure, the peptide figure and the mesh; the source stays peanut, so the allergen declaration stays with every grade. ## Why the grade is a hydrolysis decision The grade exists because hydrolysis is adjustable. Enzyme choice, dose, time, pH and temperature set how far the peanut protein is broken down, and that moves the peptide content, the bitterness, the salt load and the colour. The buyer is not choosing a flavour; the buyer is choosing a degree of hydrolysis and a specification to match it. Protein and peptide answer different questions. Protein by Kjeldahl counts the nitrogen that the factor converts to protein, including peptides and free amino acids. Peptide by HPLC counts the fraction the method defines, usually below a stated molecular-weight cut-off. A high protein figure with a low peptide figure is closer to an intact peanut protein; a high peptide figure with a low protein figure is arithmetically limited, because the peptides are part of the protein. The source is fixed. Every grade is peanut-derived, so every grade carries the peanut allergen statement. A finer mesh, a higher peptide figure or a granulated form does not make the material allergen-free. ## The catalog grade and the axes that can change Peanut protein peptide grade axes | Parameter | Catalog grade | What can be agreed | Protein | ≥80.0% by Kjeldahl | A higher minimum, with the factor and basis named | Peptide | ≥70.0% by HPLC | A higher minimum, with the HPLC cut-off named | Ash | ≤5.0% | A lower ceiling for a low-salt process | Moisture | ≤7.0% | A lower ceiling for a hygroscopic powder | Particle size | ≥95% through 80 mesh | Granulated, or a different mesh | Form | Powder, 80 mesh | Granulated on request | Peanut allergen | Declared | Declared; not removed by grade The table is a set of axes, not a list of stock grades. Each axis is agreed before the quotation, and two axes can conflict: a higher peptide figure usually needs more hydrolysis, and a process that adjusts pH more leaves more salt, which pushes ash up. A specification that asks for a higher peptide and a lower ash has to be tested, not assumed. The catalog grade is the starting point. A granulated form changes flow and dust, not the chemistry; a dilution with a carrier changes the label and the assay per gram; a higher protein minimum is a different specification, not a sorting step. ## Colour, solubility, flow and taste The catalog powder is off-white to light tan and free-flowing at 80 mesh. The colour is a range, not a fixed point; hydrolysis and drying move it, and a darker tan can be a Maillard signal rather than a different grade. The powder dissolves in water; the solution is clear to slightly turbid. There is a limit to how much will dissolve, and pH, concentration and peptide size all affect clarity. A turbid solution is not automatically a failed lot. For a beverage, test clarity at the process pH and after the heat step. The powder is hygroscopic at 80 mesh because the surface area is high. It can cake in an open pouch, and granulation can improve flow and reduce dust while slowing dissolution. Bulk density and flow are not catalog lines; ask for them if the fill weight or the filling line depends on them. Taste follows the degree of hydrolysis. Peanut notes are part of the material, and a higher peptide figure can bring bitterness. A capsule hides the taste; a powder blend or a drink does not. ## Dose arithmetic and the label A 500 mg capsule of the catalog grade carries about 400 mg protein and about 350 mg peptide at the minima; the peptide is part of the protein, not an additional 350 mg. Two capsules carry about 800 mg protein from 1 g of powder. These are arithmetic, not a recommended dose. A 5 g stick pack at 80% protein carries about 4 g protein; a 10 g serving carries about 8 g. The label declares the protein and the peanut source; the peptide figure is a specification line, not a nutrition claim. The protein claim is calculated on the finished product. In the EU, “source of protein” is 12% of the energy from protein and “high protein” is 20%; in the US, “good source” is 10% of the daily value and “excellent source” is 20%. The brand's regulatory reviewer signs off that claim for the market. The dosage form also sets the grade question: a tablet needs flow and compression, a capsule needs a fill weight, and a powder blend needs dispersion. Granulation can help the first two and hurt the third. ## What to write into the specification - “Peanut protein peptides (peanut); source and allergen statement attached.” - “Protein ≥80.0% by Kjeldahl, factor 5.46, basis stated.” - “Peptide ≥70.0% by HPLC with the cut-off and integration range.” - “Ash ≤5.0%; moisture ≤7.0%; particle size ≥95% through 80 mesh.” - “Aflatoxin B1 and total aflatoxin limits, with the sampling plan.” - “No undeclared carrier, diluent or added amino acid.” - “Granulation or a different mesh only as an agreed revision.” A purchase order that says “peanut peptide” without the protein and peptide methods is not a specification. The allergen statement belongs in the same document, because it is the one line that no grade can change. ## When a different legume protein is the better fit If the brief cannot carry a peanut allergen, the grade is the wrong material, not the wrong mesh. Soy protein isolate and pea protein isolate are the other legume options, and each brings its own protein level, taste and allergen position. Soy is a major allergen; pea is a legume with a different profile, not an allergen-free promise. If the target is the highest protein per gram, a soy peptide or isolate can be higher: the soy peptide grade is ≥90% protein and ≥80% peptide, while the peanut grade is ≥80% and ≥70%. That difference is a reason to compare the materials, not to relabel one as the other. If the target is a neutral taste, peanut's nutty notes may not fit a delicate drink; if the target is a clear solution at low pH, the peptide may need a trial. The peanut versus soy comparison takes the decision further. The catalog specification sits on the product hub; the HPLC methods are described in the methods section; the release workflow is on the quality page. ### 02.1 Peanut peptides vs soy peptides: two legumes, two labels URL: https://nutrition.rainwoodbio.com/products/protein-collagen/peanut-protein-peptides/grades/peanut-peptides-vs-soy-peptides/ Reviewed: 2026-11-19 Peanut and soy peptides are both legume-derived hydrolysates, sold on a protein minimum and a peptide minimum. They are not interchangeable: the catalog grades differ, the amino acid profiles differ, the allergens are different proteins, and the taste and colour are different. A switch changes the label, the allergen control plan and the formula, not only the ingredient name. In one linePeanut and soy peptides are both legume hydrolysates, but the protein level, the amino acid profile, the allergen and the taste differ, so one is not a drop-in for the other. ## Two legumes, one hydrolysis logic Both typically start from a legume protein, are extracted at alkaline pH and precipitated at the isoelectric point, then hydrolysed with a food-grade protease, inactivated, clarified and dried. Both are sold as peptide powders with protein, peptide, ash, moisture and mesh lines, and both can be bitter at a high degree of hydrolysis. The similarity is the process, not the ingredient. The protein source sets the amino acid profile, the allergen and the taste, and those are the differences that decide the application. ## The specifications side by side Peanut protein peptides against soy protein peptides, catalog grades | Property | Peanut peptides | Soy peptides | Source | Peanut | Soy | Protein | ≥80.0% by Kjeldahl | ≥90.0% by Kjeldahl | Peptide | ≥70.0% by HPLC | ≥80.0% by HPLC | Ash | ≤5.0% | ≤5.0% | Allergen | Peanut | Soy | Allergen status | Major allergen in the EU and the US | Major allergen in the EU and the US | Typical label name | Peanut protein peptides | Soy protein peptides | Amino acid note | Lower in lysine than soy | Higher in lysine; sulfur amino acids limiting | Sensory note | Nutty, roasted; can be bitter | Beany, green; can be bitter The table compares catalog specifications, not rank. The soy grade carries more protein and peptide per gram; the peanut grade carries its own sensory profile and its own allergen. Neither figure tells you which is the better fit for a formula. ## The amino acid profile and the protein claim Soy protein is a complete protein, and soy protein isolate is commonly cited at PDCAAS 1.0. Peanut protein scores lower; it is lower in lysine than soy, and its amino acid profile does not match the soy isolate. Hydrolysis changes the peptide size, not the amino acid composition, so a peanut peptide does not become a complete protein by being hydrolysed. The protein claim is calculated on the finished product. In the EU, “source of protein” is 12% of the energy from protein and “high protein” is 20%; in the US, “good source” is 10% of the daily value and “excellent source” is 20%. The peptide figure is not a protein-quality measure, and it is not a claim. The arithmetic also changes. A 10 g serving of peanut peptide at 80% protein carries about 8 g protein; 10 g of soy peptide at 90% carries about 9 g. To deliver 8 g protein from the soy grade, use about 8.9 g. A 1:1 swap by weight is not a 1:1 swap by protein. ## The allergen is the decisive difference Both are major allergens, but they are different proteins. Peanut allergens include Ara h 1, Ara h 2 and Ara h 3; soy allergens include Gly m 4, Gly m 5 and Gly m 6. A peanut-allergic consumer is not necessarily soy-allergic, and the reverse is also true; the two declarations are separate. Peanut allergy is common and often persistent; soy allergy is less common and often outgrown. Hydrolysis reduces some of the proteins, but it does not remove the declaration. “Hypoallergenic” and “allergen-free” are not available for either ingredient, and a negative ELISA does not prove absence. For a manufacturer, the switch is an allergen change. Adding peanut to a line that has run soy adds a new major allergen, with its own cleaning validation, dedicated tools, label and “may contain” assessment. The EU Annex II list and the US FALCPA list both name peanut and soy, so the label names the source, not the peptide. ## Taste, colour and the matrix Peanut peptides carry nutty and roasted notes; soy peptides carry beany and green notes. Both can be bitter at a high degree of hydrolysis, and both can brown in a warm, moist matrix. The peanut grade is off-white to light tan; the soy grade has its own colour range, and the two are not visually identical. The matrix decides how much the taste matters. A capsule hides it; a powder blend or a drink does not. Masking with flavour, sweetness or pH can help, but it does not change the allergen or the protein figure. Taste is a formulation variable, not a grade defect. Clarity in a beverage is a separate test. Peanut peptides are soluble and give a clear to slightly turbid solution; the soy grade has its own solubility and turbidity, and a clear drink may need a trial with both. ## What changes when you switch A switch changes the label name, the allergen statement, the protein and peptide numbers, the dose, the taste and the supplier documents. It also changes the cleaning and changeover plan, because the allergen is new to the line. Do not swap on the protein figure alone. Match the protein and peptide delivered per serving, then check the amino acid profile, the allergen and the taste. If the market file covers soy peptides but not peanut peptides, the switch is a regulatory change too, and the buyer's regulatory team confirms the route. Run a bench trial in the finished matrix before the production order. Check the colour, the taste, the clarity, the fill weight and the label. A supplier's certificate does not answer a matrix question. ## How to choose between them Choose peanut when the brief calls for peanut, the allergen is acceptable, the sensory profile fits and the 80/70 grade is enough. Choose soy when the formula needs more protein and peptide per gram, a more neutral taste and an established supply, and the soy allergen is manageable. If neither allergen fits, a third legume protein is a different decision, not a drop-in. Pea protein isolate has its own protein level and taste; it is not an allergen-free promise. Compare the specification, not the marketing name. The peanut product hub and the soy isolate page carry the catalog specifications; the grades page covers the peanut axes; the compliance page covers the allergen file; the methods section describes the assays; the quality page describes the release workflow. ### 03 Peanut protein peptides: moisture, browning and the pack URL: https://nutrition.rainwoodbio.com/products/protein-collagen/peanut-protein-peptides/stability/ Reviewed: 2026-11-19 Peanut protein peptides are hygroscopic and carry a small residue of reducing sugars and lipid. Moisture and heat drive caking, Maillard browning and a shift in the peptide profile; residual fat can oxidise. The sealed foil pouch or lined drum at a cool, dry store is the default, and a solution is the least stable format. In one lineMoisture and heat are the two variables that shorten a peanut peptide's shelf life; the pack, the water activity and the storage temperature decide whether the colour and the peptide profile hold. ## The powder: moisture, browning and residual fat The catalog sets moisture at ≤7.0%. That is a release gate, not a storage allowance. Once the foil pouch is opened, the powder picks up moisture from the air; the moisture figure rises, the as-is protein and peptide figures fall, and the powder can cake. The Maillard reaction is the second risk. Peptides and reducing sugars react faster as moisture and temperature rise, and the result is a darker colour, a loss of lysine and a changed taste. Off-white to light tan can move to tan or brown before the protein figure leaves its window. Ask for the sugar profile if the powder will be stored warm. Residual lipid is the third. Peanut is an oilseed, and a defatted peptide can still carry a small fat residue; that fat can oxidise and give a rancid odour. Ask for the fat figure and a peroxide value if the powder is held warm or the shelf life is long. Light is secondary for an opaque pack, but a clear container on a bench is still the wrong place. Keep the powder in the original light-resistant pouch or an opaque container that closes properly. ## The solution: heat, pH and residual enzyme The powder dissolves in water to give a clear to slightly turbid solution. In solution, heat, pH and oxygen act at once, and any reducing sugar in the matrix can brown with the peptides. A ready-to-drink process adds a pasteurisation or hot-fill step that the powder never sees. The enzyme step matters here. If the protease is not fully inactivated before drying, hydrolysis can continue in a wet mix, shifting the peptide distribution and raising bitterness. Ask for the inactivation step and handle residual activity as a stability question, not only an identity question. Clarity is a separate variable. The solution can turn turbid near the isoelectric pH or at high concentration, and turbidity is not always a failure; it may be a dispersion issue. Validate the hold time and the preservative or hurdle at the process pH. Data generated on the bulk powder will not answer a beverage question: the matrix, the process and the pack each set their own rate. ## What drives degradation Factors that move peanut protein peptides during storage | Factor | What it does | Control | Moisture | Caking, Maillard, microbial risk | Sealed pack; desiccant; low humidity | Heat | Accelerates Maillard and lipid oxidation | Cool store; controlled process | Reducing sugars | Browning with peptides | Sugar profile; control moisture and heat | Oxygen and residual lipid | Rancidity; off-odour | Low headspace; nitrogen flush if specified; fat limit | pH | Solubility, colour, hydrolysis | Validate the matrix pH | Metal ions | Colour and oxidation | Avoid iron and copper contact | Light | Colour shift; secondary | Opaque pack The factors are not independent. A warm, humid store is worse than the sum of the two, and a clear bottle of solution combines light, oxygen and heat. ## A stability protocol for the ingredient A protocol is only usable when it names the pack, the condition, the time points and the test panel. The warehouse case is covered by 25 °C/60% relative humidity long-term and 30 °C/65% relative humidity intermediate; 40 °C/75% relative humidity is the accelerated arm that stresses the pack. Test protein, peptide distribution, moisture, ash, colour, microbiology, and peroxide value or free fatty acids if fat is present. Aflatoxin is a release test, not a storage test; it does not disappear with time. A light arm is optional. For an opaque foil pouch it answers a question the pack already controls; for a clear pack or a solution it belongs in the plan. Give the individual results rather than a pass statement, and tie them to the pack and the lot family. Request the summary for the pack in the purchase order: a 1 kg pouch and a 25 kg drum differ in headspace and in how often they are opened, so the data has to match the pack. ## The finished formula changes the answer Capsules and tablets keep water activity low, yet the shell and the excipients can still pass moisture to the fill. A reducing excipient such as lactose can brown with the peptides; check the fill's colour and moisture at release and after storage. A powder blend or stick pack depends on the seal and the foil. A pinhole is a failure; inspect the strip as well as the powder. Segregation and caking in a blend are formulation issues, not only ingredient issues. A beverage combines pH, heat, oxygen and taste. Bulk stability is where the work starts, not where it ends; validate the peptide profile, the colour and the bitterness in the drink. Allergen changeover belongs in the same plan: a shared line that has run peanut needs a validated cleaning step before a non-peanut product, and the pack label carries the peanut allergen statement. ## How the shelf life is set There is no single shelf-life figure for peanut protein peptides, because the pack and the storage condition set it. The assigned retest period belongs on the specification and is supported by the stability file for that pack. At the end of the retest period, assay the retained sample again before any extension. Do not assume an extension, and do not apply a bulk figure to a repacked container. A shelf-life figure that does not name the pack, the condition and the test panel is a claim, not a result. The product hub lists the packs; the COA page covers the release tests; the MOQ page covers the pack and the lead time; the methods section describes the assays; the quality page explains the release workflow. ### 04 Peanut protein peptides: MOQ, packing and ordering URL: https://nutrition.rainwoodbio.com/products/protein-collagen/peanut-protein-peptides/moq/ Reviewed: 2026-11-19 The MOQ for peanut protein peptides is 1 kg, supplied as a 1 kg foil pouch; the standard bulk pack is a 25 kg fiber drum, and the standard lead time is 1–7 days. A firm quotation needs six details: the peanut source and allergen statement, the protein and peptide methods, quantity and pack, destination and Incoterm, documents, and the intended use and market. In one lineOne kilogram is the minimum because it is the smallest pack that can be sampled, tested and traced as a peanut lot, with the allergen statement attached to the same lot code. ## Why the minimum is 1 kg A 1 kg pack covers a bench-scale trial, a retained sample and an independent identity or aflatoxin test. It is also small enough to ship by air without a pallet, which matters when a formulator needs material before the production plan is fixed. The pack is a traceable commercial unit, not a scoop taken from a drum. Below 1 kg, the material is usually split from a larger lot and repacked. That adds handling, loses the original pack identity and makes traceability harder, without changing the chemistry. A split also needs its own allergen label and lot record, because the peanut source does not change with the pack size. The 25 kg drum is the bulk unit. Handling per kilogram falls, but the buyer carries more inventory and a longer storage period. The MOQ is a pack decision, not a volume incentive. ## Packs and formats Standard peanut protein peptide packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Light and moisture barrier; reseal; allergen label | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner; allergen label | Granulated powder | On request | Flow and dust control | Particle profile changes; new specification | Dilution or carrier | On request | Lower assay per gram | Carrier and label change; must be declared The catalog form is an 80 mesh powder: ≥95% through 80 mesh. Granulation or dilution is a different specification, not a packing choice. If the dosage form needs a coarser or freer-flowing powder, say so before the quotation, because the change alters the particle-size line and can add time. Every pack carries the peanut allergen label, whatever its size. ## Lead time and dispatch The standard pack is quoted at 1–7 days from order confirmation. That window covers picking, document preparation and dispatch; it does not include the shipping transit, customs clearance or the customer's own quality release. A custom granulation, a dilution or a non-standard pack adds time, and the quotation should state it separately. Request the dispatch date as well as the lead time. A 25 kg drum may travel on a pallet and a 1 kg pouch may travel as a parcel; the Incoterm decides who books the freight and who clears the entry. The documents should travel with the lot, not after it. For a peanut-derived material, the document pack should include the allergen statement and the aflatoxin results. A quotation that promises a lead time but not those documents is not a complete offer. ## What a quotation needs A comparable quotation should carry six items: - Product and source. Peanut protein peptides, source peanut, with the allergen statement. - Specification. Protein factor and basis, peptide HPLC cut-off, ash, moisture, mesh and aflatoxin limits. - Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated or diluted variant. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, specification, SDS, allergen and aflatoxin statements, and any market-specific declaration. - Intended use and market. Supplement, food or another use, and the market where it will be sold. A quotation without the source, the allergen statement and the market is incomplete. The same powder can suit one destination and fall outside the route for another, and the documents are part of what is being sold. Commercial terms are set out in the quotation, not on this page. ## The sample is a lot, not a demonstration Qualification starts with the 1 kg pack. Test identity, protein, peptide, ash, moisture, aflatoxin and microbiology before scaling, and keep a retained sample from the same pack. The lot code on the sample, the COA and the quotation should match. A sample with no traceable lot is a demonstration, not a qualification. The sample is also an allergen control item. Label it as peanut-derived, store it away from non-peanut materials, and use dedicated tools or a validated clean-down. A bench sample that has been repacked without a label is a cross-contact risk, not only a paperwork gap. If the project needs a smaller quantity for a bench trial, discuss it before ordering. A split from a bulk lot is a repack, with its own traceability rather than the catalog pack's, and it should be documented as such. Do not assume that a bench sample and the production drum will come from the same lot. ## Terms to settle before the first order Commercial terms are in the quotation: Incoterm, pack, lead time and documents. Put the quality terms alongside them: the specification revision, the COA per lot, the retained sample, the retest period, the change-control route and the allergen changeover procedure. Settle a quality agreement before the first production order, not after a dispute. Returns and replacements are governed by the quotation and the quality agreement. If a lot fails the agreed specification, use the retained sample and a joint re-test rather than a photograph. Agree in advance who pays for the referee laboratory and which one both sides accept. The catalog specification is on the product hub; the COA page lists release tests; the compliance page covers allergen and market files; the MOQ glossary defines the term; the logistics page covers shipping and documents. ### 05 The regulatory file for peanut protein peptides URL: https://nutrition.rainwoodbio.com/products/protein-collagen/peanut-protein-peptides/compliance/ Reviewed: 2026-11-19 Peanut protein peptides are a peanut-derived hydrolysate, and the regulatory file follows the source, the process and the destination. The specification and the certificate describe the material; the allergen statement, the mycotoxin results and the route have to be confirmed for the market where the finished product is sold. The buyer's regulatory team confirms the route; this page lists the framework and the documents. In one lineThe file follows the destination and the source: a peanut-derived peptide carries the peanut allergen declaration, a mycotoxin and contaminant file, and a route that the buyer's regulatory team confirms. ## What the file has to answer The file should settle four things: the exact material and the specification revision behind it; the lot and its certificate; the route, limits and label rules for the destination; and the change-control trigger if source, process or pack moves. A COA, a TDS and an SDS each answer a different part; none of them answers the route. The file carries the allergen statement naming peanut, the origin record, the process description and the specification revision. Keep the documents versioned, and name any missing statement before the order rather than at the port. The material name matters: “peanut protein peptides” or “hydrolysed peanut protein” names the source; “plant peptide” does not. ## European Union In the EU, the file sits under Regulation (EC) No 178/2002 and the food information rules in Regulation (EU) No 1169/2011. Annex II of the food information rules lists peanut and products thereof, so the ingredient has to appear in the ingredient list and be emphasised; hydrolysis does not lift that duty. A “may contain peanut” statement is a cross-contact control, not a substitute for the ingredient declaration. The novel-food question, under Regulation (EU) 2015/2283, turns on the specific history of use and the production process. Peanut itself has a food history; that does not by itself decide the status of a peptide fraction made by a particular route. For supplements, the relevant instruments are Directive 2002/46/EC, Regulation (EU) 2023/915 on contaminants and Regulation (EC) No 1924/2006 on claims, as of this review. Great Britain and Northern Ireland are checked as two files: GB uses the retained texts, while Northern Ireland stays under the EU framework. ## United States In the US, peanut is a major food allergen under FALCPA and must be declared in the ingredient list or in a “contains” statement; 21 CFR 101 sets the label rules. A supplement facility works to 21 CFR 111, a conventional food facility to 21 CFR 117; the buyer confirms the site certificate. The dietary-ingredient route depends on the basis the supplier relies on: a documented history of use, a GRAS basis, or a new dietary ingredient notification under 21 U.S.C. 350b. The supplier should identify the basis and the document behind it; the buyer checks that both cover the finished product. State rules such as California Proposition 65 may add a lead calculation. ## Contaminants and limits A contaminant result on the drum is not the end of the calculation; the finished-product dose and category decide the exposure. The table is a starting point, not a substitute for the current text. References to confirm for peanut protein peptides, by market | Parameter | EU reference | US reference | What the file shows | Peanut allergen | Annex II: declare and emphasise | Major food allergen under FALCPA | Label, COA and allergen statement | Aflatoxin B1 | 2.0 µg/kg for peanuts used as food or an ingredient | Covered by the total action level | Lot result, method and sampling plan | Total aflatoxin | 4.0 µg/kg for the same category | 20 µg/kg action level for peanut products | Lot result and sampling plan | Lead | 3.0 mg/kg in food supplements | No federal supplement-specific limit; state rules apply | Result and finished-product calculation | Cadmium | 1.0 mg/kg in food supplements | No federal supplement-specific limit | Result and category check | Mercury | 0.10 mg/kg in food supplements | No federal supplement-specific limit | Result and method | Arsenic | Not harmonised; member state rules apply | No federal supplement-specific limit | The agreed limit and method Aflatoxin is the peanut-specific line. It is not in the catalog panel, so it belongs in the agreed specification, with a sampling plan: contamination is not evenly distributed, and a small sample can miss a hot spot. Ochratoxin A belongs where the destination sets a limit. Heavy-metal limits for a food supplement and for an ingredient destined for a food category are not the same calculation; confirm which applies. ## Claims and the label A disease claim is not available for this ingredient in the EU, the US or the UK. “Hypoallergenic” and “allergen-free” are not available for a peanut-derived peptide: hydrolysis reduces some proteins, but the source and the declaration remain. A “peptide” claim about rapid absorption is a health or structure/function claim and needs its own basis in the destination; the ingredient page does not carry it. Protein claims are nutrition claims calculated on the finished product. In the EU, “source of protein” is 12% of the energy from protein and “high protein” is 20%; in the US, “good source” is 10% of the daily value and “excellent source” is 20%. “Plant-based” is true but does not change the allergen duty. The brand's regulatory reviewer signs off the final wording for the market. ## The document pack - Specification with the revision, protein factor and basis, and peptide HPLC cut-off. - COA with results and methods, and the peanut allergen statement on the COA. - Aflatoxin results and the sampling plan. - Origin, non-GMO, residual-solvent and carrier declarations. - SDS and the site's GMP, HACCP or ISO certificates. - Halal or kosher statement where required; third-party report where the buyer asks. - Allergen changeover and cleaning validation statement for shared lines. Version numbers on the document list do more for an audit than a folder of undated PDFs. Where a statement is missing, name the gap before the order. ## Checklist before the first order - Is the exact peanut peptide and its route confirmed for the destination? - Is peanut declared on the label, the COA and the allergen statement? - Are aflatoxin and heavy-metal results converted to the finished-product dose? - Is the protein or peptide claim arithmetic shown and allowed? - Does the file carry COA methods, the specification revision and the site certificates? - Is the allergen changeover and cleaning control documented? The catalog specification is published on the peanut protein peptide product page; the COA page walks through the certificate; the identity page covers the analytical evidence; the EU and US summaries set out the framework; the quality page explains the release file. ### 06 How to prove a lot is peanut protein peptides URL: https://nutrition.rainwoodbio.com/products/protein-collagen/peanut-protein-peptides/identity/ Reviewed: 2026-11-19 A peanut protein peptide lot is identified when the protein figure, the peptide distribution, the ash and sodium, and a peanut-specific check agree. The certificate name is the weakest layer: another protein can meet a Kjeldahl figure, and another hydrolysate can meet a peptide figure. The source and the allergen statement are part of the identity, not only the label. In one lineIdentity is a set of agreeing measurements: protein with its factor, the peptide distribution, ash and sodium, and a peanut-specific check that the source is what the label says. ## The five identity layers One number cannot carry the identity on its own. Another protein can satisfy the Kjeldahl figure, another hydrolysate can satisfy the peptide figure, and a dye can imitate the colour. The layers below are separate questions, and each needs its own evidence. Five layers of peanut protein peptide identity | Layer | Question | Test | What it proves | Document | Is the material and source named? | Name, source, lot, allergen statement | Paperwork and traceability only | Protein | Is the nitrogen from peanut protein? | Kjeldahl with factor and basis; amino acid profile | The protein quantity, not the source | Peptide | Is it a hydrolysate? | HPLC peptide distribution with the cut-off | The fraction, not the parent protein | Source | Is it peanut? | Peanut-specific PCR; ELISA for Ara h 1 or Ara h 2 | A peanut marker, within the test's limits | Mass balance | Is it diluted or salted? | Ash, sodium, moisture, protein and peptide figures | Consistency of the numbers The document layer records what was intended; it cannot show what was made. The other four layers are the evidence, and they have to agree. ## The protein-to-peptide ratio and the ash pair Read protein and peptide on the same basis. At the catalog minima, 80% protein and 70% peptide mean the peptide fraction is at least 87.5% of the protein figure; the peptide is part of the protein, so the numbers overlap rather than add. A high protein figure with a low peptide figure points to intact peanut protein, a coarse hydrolysate or non-protein nitrogen. A high peptide figure with a low protein figure is arithmetically limited; check the methods and the bases before accepting it. A lot at 80% protein and 60% peptide is not the catalog grade, whatever the label says. Ash and sodium are the second pair. Ash is ≤5.0%; a high ash with high sodium is consistent with salt from pH neutralisation, while a high ash with low sodium points to another mineral or a carrier. Moisture closes the mass balance: protein, ash, moisture and fat should account for the powder, with the peptide inside the protein figure, and a gap is a question. The ratio is a consistency check, not a purity measure. ## What XRD can and cannot show Peanut peptides are amorphous. A diffractogram shows a broad halo and no crystalline peaks, so XRD cannot identify the peptide or separate it from a soy or pea peptide. It can show a crystalline salt. Sodium chloride from neutralisation is crystalline, and a powder that shows halite peaks has a salt phase that the ash figure alone would not distinguish from other minerals. It can also show a crystalline carrier such as lactose or sorbitol; amorphous maltodextrin is invisible to XRD. Use XRD as a screen when ash or sodium is high or a carrier is suspected, not as a release test. Before accepting a “match” statement, ask for the reference pattern and the limit of detection. ## What adulteration looks like Substitution routes · what gives them away | Route | Marker | Test | Other plant protein (soy, wheat, pea) | Protein and peptide may pass; amino acid profile shifts; no peanut DNA | Amino acid profile; peanut-specific PCR; allergen ELISA | Intact peanut protein or meal | Peptide low for the protein figure; large proteins in the distribution | HPLC peptide distribution | Free amino acids | Peptide low; free amino nitrogen high | Amino acid profile; HPLC | Non-protein nitrogen (melamine, urea) | Protein high; amino acids low | Kjeldahl plus amino acid profile; melamine and cyanuric acid screen | Carrier dilution (maltodextrin) | Protein and peptide down; ash may rise; XRD halo | Mass balance; declared carrier; label | Salt from neutralisation | Ash and sodium high; protein and peptide normal | Ash, sodium, XRD (halite) Melamine is about 67% nitrogen by mass, so a small addition lifts the Kjeldahl figure without adding peptide. Urea does the same on a smaller scale. Neither is caught by a protein result; both are caught by the amino acid profile and a targeted screen. For peanut, species-specific PCR and allergen ELISA are useful, but hydrolysis degrades DNA and cleaves epitopes: a negative result does not prove absence, and the declaration follows the source. ## How to write identity into the specification - “Peanut protein peptides (peanut); source and allergen statement.” - “Protein ≥80.0% by Kjeldahl, factor 5.46, basis stated.” - “Peptide ≥70.0% by HPLC, cut-off and integration range stated.” - “Ash ≤5.0%; sodium reported; moisture ≤7.0%.” - “Particle size ≥95% through 80 mesh.” - “Aflatoxin B1 and total aflatoxin limits; sampling plan stated.” - “No undeclared carrier, diluent or added amino acid.” - “Peanut-specific check on request; lot code and retained sample.” A specification that names only the material leaves the two central numbers and the source untested. ## Five questions for the supplier - Which peanut source and which allergen statement does this lot carry? - What are the protein factor and basis, and what is the HPLC cut-off for the peptide figure? - What are the ash and sodium results, and is any carrier declared? - Can you supply the aflatoxin results and the sampling plan for this lot? - If the lot is disputed, will you run a joint re-test on the retained sample? Five specific answers build an identity file; one protein percentage does not. The catalog specification is on the product hub; the COA page maps each figure; the grades page covers the specification axes; the compliance page covers the allergen file; the methods section describes the HPLC, ICP and PCR methods; the quality page covers the retained sample. ### 01 What the COA for soy protein peptides actually contains URL: https://nutrition.rainwoodbio.com/products/protein-collagen/soy-protein-peptides/coa/ Reviewed: 2026-11-19 The certificate for a soy protein peptide lot reports appearance, the protein and peptide profile, protein by Kjeldahl, peptide content by HPLC, moisture, ash, heavy metals, microbiology and particle size, with soy named as the source. Protein and peptide answer different questions, and each needs its method and basis beside it. The limits below describe the catalog grade; a batch certificate is the record for one released pack. In one lineThe protein result measures nitrogen; only the peptide result, the moisture and the soy statement show what kind of powder the lot is. ## Reading the certificate line by line A certificate is auditable when every line names the method and the limit. For a hydrolysate the identity line is not the protein percentage on its own: it is the combination of the soy source, the peptide profile and the declared hydrolysis. A row that says only “conforms” leaves the evidence out. Identity, protein, peptide and contaminants · soy protein peptides | Parameter | Method | Release limit | Appearance | Visual | Off-white to light yellow powder | Identification | Protein and peptide profile against reference | Conforms | Protein | Kjeldahl; factor and basis stated | ≥90.0% | Peptide content | HPLC; method and cut-off stated | ≥80.0% | Moisture | Loss on drying | ≤7.0% | Ash | Gravimetric, furnace | ≤5.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh The certificate should name soy, and the specification should state that the material is hydrolysed soy protein, not isolate, concentrate or flour. A certificate that says only “plant peptide” has not identified the allergen. ## Protein, peptide and the basis behind both Kjeldahl gives nitrogen, and a conversion factor turns that nitrogen into a protein figure. Soy protein is often calculated at N × 6.25, the general food factor, while a soy-specific factor of 5.71 is also used in some methods. The two give different percentages for the same nitrogen result, so the factor belongs next to the figure. The moisture basis matters as much. At the 7.0% moisture limit, a 90.0% protein result on a dry basis is 83.7% as-is. A certificate that prints 90.0% without the basis leaves the reader to guess whether the powder as weighed carries that figure. A 90.0% protein limit, 7.0% moisture and 5.0% ash cannot all sit at their limits in the same as-is powder, because they sum past 100%; in practice the protein figure is reported on a dry basis, and the certificate should say so. Peptide content is a separate measurement. HPLC separates the peptide fraction from free amino acids and other small nitrogenous compounds, and the result depends on the column, the mobile phase and the molecular-weight cut-off. The catalog names HPLC and ≥80.0%, so the agreed method supplies the rest. Reporting the peptide figure against the sample or against the protein is a third choice that belongs on the certificate. The two figures can be compared only on the same basis. At 90.0% protein and 80.0% peptide, the peptide fraction is at least 88.9% of the protein figure. The gap covers free amino acids, peptides below the cut-off and non-protein nitrogen; a wider gap is a question about the method, not automatically a reject. ## Release limit versus batch result The release limit is the gate; the batch result is the number the laboratory measured for that lot. The page needs both, in separate columns, with the method alongside. A result column that repeats the specification range has not reported a measurement. What the result column should contain | Parameter | Release limit | Result column | Protein | ≥90.0% | A measured percentage with the factor and the basis | Peptide content | ≥80.0% by HPLC | A measured percentage with the method and the cut-off | Moisture | ≤7.0% | A measured percentage | Ash | ≤5.0% | A measured percentage | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot | Particle size | ≥95% through 80 mesh | The measured percentage through the sieve “Passes specification” is a conclusion the reader should reach from the numbers. Heavy metals need a figure per element, not a total; microbiology needs a count plus an absence statement. The soy declaration is a document statement rather than a pass or fail line, and it still belongs in the batch file. ## What moves between batches The soy raw material moves first: cultivar, growing region and the protein load of the flour or concentrate that feeds the hydrolysis. Hydrolysis conditions move the peptide figure. The enzyme, its dose, the hold time, the temperature and the pH set the degree of hydrolysis; a longer cut lifts peptide content and usually lifts bitterness too. Spray drying fixes moisture and bulk behaviour; milling and sieving fix the mesh result. Colour is the least quantitative line. Off-white to light yellow covers a wide window; a darker tan can follow a hotter dry, a longer hold or a Maillard reaction with residual reducing sugar, while the protein figure still passes. A trend across lots — peptide drifting low, moisture climbing, ash rising — says more than one result near an edge. Ask for the retained sample and the process record before rejecting on appearance. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a disputed peptide figure or a label that depends on the soy statement. The useful panel is protein by Kjeldahl with the factor, peptide by HPLC with the method and cut-off, moisture, ash, ICP-MS for the heavy metals, microbiology, and a soy allergen statement that names the source. An ELISA screen for soy protein can under-read a hydrolysate because hydrolysis has cut the epitopes the antibody recognises. That does not remove the declaration: the allergen statement follows the source, not the ELISA result. If the label claims non-GMO or identity-preserved soy, ask for the supporting certificate as well. The retained sample and the tested sample should be the same material, and the report should carry the lot code. If a result is disputed, send the referee the retained sample and the agreed specification, and ask for the discriminating tests rather than a repeat assay. ## What to compare between suppliers Compare six lines: the soy source and hydrolysis; protein with its factor and basis; peptide with its method and cut-off; moisture and ash; heavy metals and microbiology; the allergen statement. If two quotations match on protein but not on the peptide method, they do not describe the same powder. The second layer is traceability: who ran the hydrolysis, which soy material went in, and which drying and milling steps followed. The catalog grade is on the product page. The tests that separate a hydrolysate from an isolate are on the identity page; the allergen and market file on the compliance page; the methods are explained in the methods section; the release workflow is set out on the quality page. ### 02 Soy protein peptide grades: peptide content and form URL: https://nutrition.rainwoodbio.com/products/protein-collagen/soy-protein-peptides/grades/ Reviewed: 2026-11-19 Soy protein peptides are hydrolysed soy protein, specified at ≥90% protein and ≥80% peptide, and the grades differ mainly in peptide content and physical form. The intact soy protein isolate is a different ingredient with a different label, even when its protein figure is also 90%. The choice is set by the matrix, the taste, the protein target and the soy declaration, not by the protein percentage alone. In one lineA soy peptide grade is fixed by how far the protein is hydrolysed and how the powder is finished; the protein percentage alone does not tell a hydrolysate from an isolate. ## Why the family has more than one member Hydrolysis cuts peptide bonds and turns intact soy protein into a mixture of shorter peptides and free amino acids. The degree of hydrolysis is the share of bonds broken, and the peptide content by HPLC is the commercial measure of how much of the powder sits in the peptide fraction. Two lots can both pass ≥90% protein and still differ in peptide content, taste and solubility because the enzyme, the time and the drying were different. The family also includes the intact material. Soy protein isolate is ≥90% protein on a dry basis, made by alkaline extraction and isoelectric precipitation; it is not hydrolysed, so it has no peptide specification and behaves as a protein rather than as a peptide. The two are separate label ingredients and separate specifications, and a purchase order that names only “soy protein” has specified neither. ## The two materials at a glance Soy protein peptides against soy protein isolate | Property | Soy protein peptides | Soy protein isolate | Protein | ≥90.0% by Kjeldahl; factor stated | ≥90.0% on a dry basis, N × 6.25 | Peptide content | ≥80.0% by HPLC | Intact protein; no peptide specification | Water behaviour | Soluble; clear to slightly turbid | Dispersible; opaque, can settle | Function in a formula | Low viscosity; little gel or emulsion | Viscosity, gel, emulsion and water binding | Taste | Savoury and beany; bitterness rises with hydrolysis | Beany and cereal; blander at the same solids | Soy allergen | Declared | Declared | Label name | Soy protein peptides | Soy protein isolate | Usual fit | Sticks, drinks and clear systems | Bars, powders and textured systems The table maps the family; it is not a ranking. The isolate is the material for a formula that needs the protein's own functional behaviour. The peptide is the material for a formula that needs solubility and a low viscosity at high solids. Both rows carry the same source and the same allergen. ## What changes in the powder The standard peptide powder is 80 mesh: ≥95% through 80 mesh. It is off-white to light yellow, free-flowing when dry and hygroscopic once the pouch is open. Granulation is available on request; it changes the bulk density, the dust and the wetting rate, not the protein or peptide figure. The isolate is also specified at 80 mesh, but it disperses rather than dissolves. An isolate dispersion is opaque and can settle; a peptide solution is clear to slightly turbid at the same solids. Colour and odour move with the raw material and the dry: both are beany, and the peptide can carry a savoury note that strengthens as the degree of hydrolysis rises. Mesh is a finishing specification. A finer cut disperses faster and makes more dust; a granulated powder flows better and fills a scoop differently. Neither is a grade in the chemical sense, and neither changes the allergen statement. ## What changes at the target dose The label arithmetic runs on the as-is figure. At 90.0% protein on a dry basis and 7.0% moisture, the powder is 83.7% protein as-is, so 5 g carries 4.19 g protein. If the peptide figure is also on a dry basis, 80.0% becomes 74.4% as-is and 5 g carries 3.72 g peptide. The peptide mass sits inside the protein mass, so the two figures do not add up to the powder weight. Peptide is a fraction of the protein, not an addition to it. At the catalog figures, peptide is at least 88.9% of protein on the same basis; the rest is free amino acids and nitrogen that the peptide method does not count. A label that adds “protein” and “peptide” as two masses double-counts the same nitrogen. A serving statement should name the ingredient and the basis. “5 g soy protein peptides” and “4 g soy peptides” are different statements; the first is the ingredient weight, the second a peptide figure that needs an analytical basis. The brand's regulatory reviewer confirms the wording for the destination, and this page makes no disease-related claim. ## What to write into the specification - “Hydrolysed soy protein, sold as soy protein peptides; the soy source is named.” - “Protein: ≥90.0% by Kjeldahl, with the factor and the moisture basis on the certificate.” - “Peptide: ≥80.0% by HPLC, with the column, mobile phase and cut-off named.” - “Moisture ≤7.0%, ash ≤5.0%, and ≥95% passing 80 mesh.” - “Where taste or clarity matters, report the degree of hydrolysis or the molecular-weight distribution.” - “Soy allergen statement; non-GMO or identity-preserved status only if the label claims it.” A specification that says only “soy peptide powder” leaves the supplier free to choose the hydrolysis and the carrier. The name on the specification, the certificate and the ingredient list has to be the same name. ## When the other material is the wrong choice The peptide is the wrong choice when the formula needs the intact protein's gel, emulsion or water-binding behaviour, as in some bars and textured systems. The isolate is the wrong choice when the serving needs a clear solution, a low viscosity at high solids or a peptide figure on the label. A switch in either direction changes the specification, the label name and the allergen statement, even though both materials come from soy. If the allergen is the deciding factor, neither soy material solves it. Soy is the source of both, and hydrolysis does not remove the declaration. A formula that must avoid soy needs a different protein, such as collagen peptides, with its own specification and its own allergen position; that is a reformulation, not a grade change. The catalog grade sits on the product hub. The level-four comparison follows the solubility, allergen and label questions; the isolate page gives the intact specification; the COA page shows how the two figures are reported; the methods section explains the assays. ### 02.1 Soy peptides vs soy isolate: solubility, allergen and label URL: https://nutrition.rainwoodbio.com/products/protein-collagen/soy-protein-peptides/grades/soy-peptides-vs-soy-isolate/ Reviewed: 2026-11-19 Soy protein peptides and soy protein isolate both come from soy and both can be specified at ≥90% protein, but they are not the same ingredient. The peptide is hydrolysed: its protein is cut into shorter chains, and the specification adds a peptide content of ≥80% by HPLC. The isolate is intact protein, sold on its protein, fat and pH figures. Hydrolysis changes the solubility, the taste and the function; it does not remove the soy allergen declaration. In one lineHydrolysis cuts the protein into peptides, which changes the solubility, the mouthfeel and the label name; the soy declaration stays. ## What hydrolysis changes A protein is a chain of amino acids joined by peptide bonds. Hydrolysis breaks some of those bonds, with an enzyme or an acid, and the product is a mixture of shorter peptides and free amino acids. The degree of hydrolysis is the share of bonds broken; the commercial specification measures the peptide fraction by HPLC and may add a molecular-weight distribution. A higher degree of hydrolysis means shorter chains, more free amino groups and a different taste. The isolate takes a different route. Soy protein is dissolved under alkaline conditions, brought to its isoelectric point near pH 4.5, washed, neutralised and dried. The protein comes through intact, which is why the isolate has functional properties — gel, emulsion, water binding — that a hydrolysate has largely lost. Both materials start from soy; the process, the specification and the label name diverge from there. ## The two materials side by side Soy protein peptides against soy protein isolate | Property | Soy protein peptides | Soy protein isolate | Protein | ≥90.0% by Kjeldahl; factor stated | ≥90.0% on a dry basis, N × 6.25 | Peptide content | ≥80.0% by HPLC | Intact protein; no peptide specification | Molecular size | Short chains and free amino acids | Intact globular protein | Water behaviour | Dissolves; clear to slightly turbid | Disperses; opaque, can settle | Viscosity at high solids | Lower | Higher | Gel and emulsion | Limited | Useful gel, emulsion and water binding | Taste | Savoury and beany; bitterness rises with hydrolysis | Beany and cereal; blander | Soy allergen | Declared | Declared | Label name | Soy protein peptides | Soy protein isolate The table is a map, not a ranking. The isolate is the material for structure; the peptide is the material for solubility and a low viscosity at high solids. A formulator who needs both can blend them rather than choosing one. ## Solubility, clarity and viscosity Hydrolysis lowers the molecular weight and exposes more polar groups, so the peptide dissolves in water and gives a clear to slightly turbid solution. The isolate does not dissolve in the same sense: it disperses as a colloid, the dispersion is opaque and it can settle on standing. Near pH 4.5 the intact protein is close to its isoelectric point and precipitates; the peptide stays soluble over a wider range, although high solids, divalent ions and a low pH can still produce haze. Viscosity follows the same difference. At a high solids load, an isolate dispersion becomes thick and can gel, which is useful in a bar and awkward in a drink. The peptide keeps a lower viscosity, so a stick pack or a ready-to-drink formula can carry more protein solids without becoming syrupy. The trade is function: the peptide builds less gel and emulsion structure, so it cannot replace the isolate where structure is the point. Taste moves with the degree of hydrolysis. Short peptides and free amino acids can taste savoury or bitter, and bitterness tends to rise as the chain length falls. The isolate is beany and cereal but less bitter. A flavoured drink can mask some of the peptide note; a plain capsule cannot. ## The soy allergen does not hydrolyse away Soy is a major food allergen in the European Union, the United States and the United Kingdom. Both materials are soy-derived, so both carry the declaration: soy must appear in the ingredient list or the “Contains” statement, and the specification should carry the allergen statement with the cross-contact controls behind it. Hydrolysis can reduce the size of the proteins that antibodies recognise, and an ELISA screen may therefore under-read a hydrolysate. That is a property of the test, not a change in the label obligation. A supplier should not offer to remove the soy declaration because the material is “hydrolysed”, and a brand should not describe the ingredient as allergen-free. The declaration follows the source. ## What the label has to say The ingredient list has to name the material. “Soy protein peptides” says both the source and the hydrolysis; “soy protein” alone hides the hydrolysis, and “soy protein isolate” is a different ingredient. The protein and peptide figures are separate: the nutrition or supplement panel declares protein in grams, while the peptide content is a specification figure that is not a permitted nutrient declaration in every market. The allergen declaration is part of the same label review. The brand's regulatory reviewer confirms the wording for the destination, and the finished product must meet any protein claim on the food as sold. No disease-related claim is made here; the pack wording belongs to the brand and its market. ## When to choose which Choose the peptide for clear or high-solid beverages, stick packs, and formulas where fast dispersion and low viscosity matter. Choose the isolate for bars, baked goods, textured systems and any formula that uses the protein's gel, emulsion or water-binding function. If the label names one and the specification buys the other, the label is wrong before the first batch. A switch in either direction needs a new specification, a new allergen review and a label change. The soy declaration does not disappear, because both materials come from soy. A formula that must avoid soy needs a different protein altogether, such as collagen peptides, which is a reformulation rather than a grade change. The soy protein peptides hub carries the catalog grade; the soy protein isolate page gives the intact-protein specification; the grades page sets this comparison inside the wider range; the identity page shows how the two are told apart; the methods section explains the assays; the quality page sets out the release file. ### 03 Soy protein peptides are hygroscopic; moisture, heat and the pack set the shelf life URL: https://nutrition.rainwoodbio.com/products/protein-collagen/soy-protein-peptides/stability/ Reviewed: 2026-11-19 Soy protein peptides are hygroscopic and protein-rich, so the powder picks up moisture and the solution supports microbial growth. Moisture, heat and reducing sugars drive caking and browning in the powder; heat, pH and microbial load drive the solution. A shelf life belongs to a named pack and a named storage condition; the certificate does not set it. In one lineThe powder fails when it takes up water; the solution fails when heat and microbes get a hold, so the pack and the process set the shelf life. ## The powder: moisture, caking and browning The catalog sets moisture at ≤7.0%. That figure is an acceptance limit, not a storage budget. Once the foil pouch is opened, the peptide picks up moisture from the air; the powder begins to clump, the flow falls and the as-is protein figure drops. A closed seam and a dry room matter as much as the printed limit, although neither appears on the certificate. Browning is the second change. Soy peptides carry free amino groups, and a reducing sugar in the powder or in a blend can react with them during a warm, humid hold. The colour moves from off-white toward tan, lysine is consumed and the taste turns more savoury or stale. The reaction is slow in a sealed, cool pack and fast in a warm warehouse or a blended powder with sugar and no moisture barrier. Heat raises the rate of both changes. Ambient temperatures are usually acceptable for the sealed pack; a hot loading bay, a car boot or a greenhouse is not. After cold storage, let the sealed pack reach room temperature before opening it, so condensate does not form on the powder. ## The solution: clear, but not sterile The peptide dissolves in water to give a clear to slightly turbid solution. That clarity is an advantage in a beverage, and it also removes the preservative effect of a dry matrix: a protein-rich solution is a microbial substrate. A pasteurisation or hot-fill step controls the load but adds a heat load, and the same heat drives browning and can gel or haze the protein. pH is a second variable. Intact soy protein precipitates near its isoelectric point around pH 4.5; a hydrolysate stays soluble over a wider range, but high solids, divalent ions and a low pH can still produce haze or sediment. Validate the appearance at the formula pH, not only in water. Keep dissolved oxygen low and protect the solution from light where the packaging allows it. A ready-to-drink process should fix the heat load, the pH, the preservative system and the hold time together. A bulk-powder stability result does not transfer to a beverage, because the matrix and the process change the rate. ## What drives degradation Factors that move soy protein peptides during storage | Factor | What it does | Control | Moisture | Caking, flow loss and a lower as-is protein figure | Sealed pouch; dry store; desiccant where needed | Heat | Accelerates browning and moisture damage | Cool store; controlled process heat | Reducing sugars | Maillard browning with free amino groups | Check the blend; keep moisture low | pH | Haze or precipitation near the isoelectric point | Validate the matrix pH; buffer if needed | Oxygen | Oxidation of residual lipid and colour change | Low headspace; sealed pack; process control | Microbial load | Growth in a protein-rich solution | Validated preservation and heat step These factors act together. A warm, humid store is worse than the sum of two separate effects, and a sweetened drink at neutral pH combines heat, sugar and microbial risk. The question that matters is not whether soy peptides are stable in general, but how long they hold in a defined pack and condition. ## A stability protocol for the ingredient A protocol is only useful when it names the pack, the condition, the time points and the panel. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% relative humidity cover the warehouse; accelerated storage at 40 °C/75% relative humidity stresses the pack. A light-exposure arm covers colour change that a dark incubator misses. Test protein, peptide content, moisture, ash, appearance, microbiology and taste at each point. Protein and peptide belong on the panel because browning and moisture change both figures, and taste belongs there because bitterness and savoury notes can move before any chemical line fails. For a beverage or a stick pack, repeat the work in the matrix and at the process pH and heat load. Request data for the pack you will actually buy, not for another pack in the same family. The drum and the pouch differ in headspace and in how often they are opened; one pack's data cannot stand in for the other. ## The finished formula changes the answer Capsules and tablets keep water activity low, yet the shell and the excipients can still pass moisture. Check moisture at release and after storage, and check the appearance of the fill. A stick pack lives or dies by its seal; a pinhole is a failure, so inspect the strip as well as the powder. A beverage combines heat, pH, oxygen and microbial risk. Bulk data is where the formula work starts, not where it ends. Whether an overage is needed is a label and stability decision for the formulator; it does not repair a pouch that leaks. A bar adds a low-water matrix but a long shelf life, so the peptide's moisture exchange with the bar has to be measured in the bar. ## How the shelf life is set We do not publish a single shelf-life number for soy protein peptides, because the pack and the storage condition set it. The assigned retest period belongs on the specification and is supported by the stability file for that pack. A figure that arrives without a pack, a storage condition and a test panel describes a hope, not a shelf life. When the retest period ends, re-assay the retained sample before extending use. Do not extend by assumption, and do not carry a bulk figure across to a repacked container. The catalog packs are on the product hub; the COA page covers the release tests; the MOQ page covers pack and lead time; the isolate stability page gives the intact-protein comparison; the quality page sets out the release workflow. ### 04 Soy protein peptides: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/protein-collagen/soy-protein-peptides/moq/ Reviewed: 2026-11-19 Soy protein peptides start at 1 kg: the catalog pack is a 1 kg foil pouch, and production runs use a 25 kg fiber drum. Standard packs are quoted at 1–7 days after order confirmation. A comparable quotation needs the protein and peptide basis, the soy allergen statement, the pack and quantity, the destination and Incoterm, the documents and the intended use. In one lineOne kilogram is the smallest pack that can be sampled, tested and traced as a lot; the 25 kg drum is the production unit. ## Why the minimum is 1 kg One pouch is enough for a bench run, a retained sample and an outside test, all drawn from the same lot. It also travels as a parcel, which helps when a formulator needs material before the production plan is fixed. The pouch is a released unit with its own lot code, not a scoop taken from a drum. Under 1 kg, material is normally split from a larger lot and repacked. The repack adds handling, breaks the original pack identity and weakens traceability, without changing the powder. The 25 kg drum cuts handling per kilogram, at the cost of inventory and a longer storage window. The minimum is set by the pack, not by a volume target. ## Packs and formats Standard soy protein peptide packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Particle profile changes; specification revision Every standard pack is an 80 mesh powder: ≥95% through 80 mesh. Granulation is a separate physical specification, not a packing option. If the line needs a freer flow or less dust, raise it before the quotation, because the change moves the particle-size line and can move the lead time. ## Lead time and dispatch Standard packs are quoted at 1–7 days after order confirmation. The window covers picking, documents and dispatch; transit, customs clearance and the customer's own quality release sit outside it. A granulation or a non-standard pack adds time, and the quotation should show that separately. Ask when the lot will leave the warehouse, not only how long the lead time is. A drum may travel on a pallet and a pouch as a parcel; the Incoterm decides who books the freight and who clears the entry. Documents should accompany the lot, not follow it. ## What a quotation needs A quotation that can be compared carries six things: - Product and source. Soy protein peptides from hydrolysed soy protein, with the soy source and hydrolysis route named. - Specification. Protein with its factor and basis; peptide with its HPLC method and cut-off; moisture, ash, mesh, heavy metals and microbiology. - Allergen statement. A soy statement covering the material and the pack, with the cross-contact controls behind it. - Quantity and pack. 1 kg pouch, 25 kg drum or a granulated variant. - Destination and Incoterm. Country, port or address, and the trade term. - Intended use and market. Supplement or food use, and the market where the finished product will be sold. Without the market and the allergen statement, a quotation is incomplete. The same powder can fit one destination and fall outside the file for another; the paperwork is part of the offer. Commercial terms are not published here; they belong in the quotation. ## The sample is a lot, not a demonstration The 1 kg pouch is the qualification sample. Before scaling, test identity, protein, peptide, moisture and microbiology, and keep a retained sample from that pouch. The lot code on the sample, the certificate and the quotation should agree. A sample with no traceable lot is a demonstration, not a qualification. If a bench trial needs less than 1 kg, raise it before ordering. A split from a bulk lot is a repack with its own traceability, not the catalog pack, and should be documented that way. Do not assume the bench sample and the production drum come from the same lot. ## Terms to settle before the first order The quotation covers commercial terms, the Incoterm, the pack, the lead time and the documents. Quality terms sit beside them: the specification revision, a certificate per lot, the retained sample, the retest period and the change-control route for the soy source and the hydrolysis. A quality agreement is easier to negotiate before the first production order than after the first dispute. The allergen statement is a controlled document as well. A change of soy source, plant or hydrolysis line should trigger a new statement and a fresh label review. Returns and replacements follow the quotation and the quality agreement; a lot that fails the agreed specification is handled through the retained sample and a joint re-test, not a photograph of the powder. The catalog packs are on the product hub; the COA page lists the release tests; the compliance page covers the allergen and market file; the stability page covers storage; the methods section defines the assays; the quality page sets out the release workflow. ### 05 The regulatory file for soy protein peptides URL: https://nutrition.rainwoodbio.com/products/protein-collagen/soy-protein-peptides/compliance/ Reviewed: 2026-11-19 Soy protein peptides are a soy-derived food ingredient, and the file has to show three things at once: that the material is the hydrolysed soy protein named on the specification, that the soy allergen is declared, and that the contaminant results meet the limit for the finished product. The buyer's regulatory team confirms the route for the destination. This page names the framework and the documents, not a market approval. In one lineThe material is hydrolysed soy protein; the allergen declaration follows the source, and the buyer's regulatory team confirms the route for the destination. ## What the file contains Four questions drive the file. First, what exactly is the material, and which version of the specification is being bought? Second, which lot is on the certificate, and what did the laboratory measure? Third, which contaminant and label rules attach to the finished product? Fourth, what has to be re-opened if the soy source, the hydrolysis or the pack changes? The certificate answers the lot question, the technical data sheet answers the specification question, and the safety data sheet answers the handling question. The route question needs its own answer from the buyer's regulatory team. The allergen statement is the thread through all four. Soy is one of the allergens that must be declared in the markets covered here, and the statement belongs in the specification, the batch file and the finished label. The file should also hold the GMO or identity-preserved statement, the origin record and any customer-specific declaration. If a statement is missing for the lot, say so before the order rather than at the port. ## European Union General food law, Regulation (EC) No 178/2002, sets the traceability and safety duties; labelling follows Regulation (EU) No 1169/2011. Soya and products thereof sit on Annex II of that regulation, so soy protein peptides must be declared in the ingredient list unless a specific exemption applies. The exemption for fully refined soybean oil and natural mixed tocopherols does not cover a soy protein or a soy peptide. Contaminants are governed by Regulation (EU) 2023/915 as of this review; the limits apply to the food as sold, so the finished-product dose and category decide the figure. Nutrition and health claims follow Regulation (EC) No 1924/2006. The buyer should check the current consolidated texts, because the versions move. The route question is separate. Soy protein has a long food history, but a hydrolysate is a different material from the isolate, and the buyer's regulatory team should check the current novel-food catalogue for the specific material and production route rather than assume that the isolate's history covers the peptide as of this review. ## United States Soy is a major food allergen under the Food Allergen Labeling and Consumer Protection Act. The label must declare it, either as “soy protein peptides (soy)” in the ingredient list or in a “Contains: soy” statement. The declaration is not optional and is not removed by hydrolysis. For a supplement, the dietary-supplement framework applies, including the current good-manufacturing-practice rules, and the supplier should put the intended-use basis in writing. For a conventional food, the ingredient and labelling rules of the FD&C Act apply. Protein claims follow 21 CFR 101.54: “good source” at 10–19% of the Daily Value and “high” at 20% or more, calculated on the food as sold. The buyer confirms that the basis covers the finished product and the claim. ## United Kingdom Great Britain and Northern Ireland are checked separately. The GB file uses the retained Food Information Regulations 2014 and their devolved equivalents, with the 14 allergens including soy; Northern Ireland follows the EU framework. The UK importer should establish which documents the destination authority expects, because retained law can drift from the EU text. The allergen declaration and the contaminant results travel with the lot in both cases. ## Contaminants and limits A contaminant result on the drum is only half the calculation; the finished product and its daily dose decide whether the figure is acceptable. The table gives the catalog starting point and what the batch file should be able to show for a supplement. Heavy-metal limits · soy protein peptides | Parameter | Catalog limit | What the file should show | Lead (Pb) | ≤3 mg/kg | Lot result, method and the finished-product calculation | Cadmium (Cd) | ≤1 mg/kg | Lot result and any category exception that applies | Mercury (Hg) | ≤0.1 mg/kg | Lot result and method | Arsenic (As) | ≤2 mg/kg | The agreed buyer limit and the method, stated on the certificate | Microbiology | APC ≤1,000 cfu/g; E. coli and Salmonella absent | The count and the absence statement for the lot The arsenic figure is a buyer requirement, not a harmonised EU limit; the EU rules do not set a single arsenic limit for this category. Lead, cadmium and mercury in the catalog match the supplement limits used in the EU file, and they still have to be converted to the finished-product dose. ## Label and claims The label has to name the ingredient, its quantity and its source in the form the destination requires. “Soy protein peptides” is the ingredient; “soy protein” alone hides the hydrolysis, and “soy peptides” alone hides the protein figure. Claims are reviewed apart from the certificate: the brand's regulatory reviewer confirms that the wording is allowed for the product, the form and the market. Protein claims are nutrient claims and are calculated on the food as sold. In the EU, “source of protein” needs 12% of the energy and “high protein” needs 20%; in the United States, “good source” is 10–19% of the Daily Value and “high” is 20% or more. A peptide figure is not a permitted nutrition claim in every market, so it belongs in the specification rather than in the claim line. No disease-related claim is made for this material. The file should also avoid describing the peptide as allergen-free or hypoallergenic because it is hydrolysed: the source is soy, and the declaration stays. ## Papers that ship with the lot - Batch COA with protein, peptide, moisture, ash, mesh, heavy metals and microbiology. - Specification and technical data sheet naming soy protein peptides, the hydrolysis route and the protein factor. - Safety data sheet in the 16-section format. - Soy allergen statement and the cross-contact controls behind it. - GMO or identity-preserved statement where the label relies on it. - Contaminant and microbiological results for the lot, with methods. - US intended-use statement for the dietary-ingredient route, where applicable. - Change-control statement covering the soy source, the hydrolysis and the pack. ## Checklist before the first order - Does the specification name soy, the hydrolysis, the protein factor and the peptide method? - Does the allergen statement cover soy and every carrier in the pack? - Are the contaminant results calculated against the destination limit for the finished product? - Does the finished product meet the protein claim conditions on the food as sold? - Do the specification, certificate and label use the same ingredient name? - Does the lot code match across the certificate, the container and the retained sample? The catalog grade is on the product hub; the identity page sets out the analytical evidence; the soy isolate compliance page gives the intact-protein comparison; the methods section explains the assays; the quality page describes the release file. ### 06 How to prove a lot is soy protein peptides URL: https://nutrition.rainwoodbio.com/products/protein-collagen/soy-protein-peptides/identity/ Reviewed: 2026-11-19 A soy protein peptide lot is identified by measurements that agree: the document names soy and the hydrolysis, protein by Kjeldahl, peptide content and distribution by HPLC, ash and moisture closing the mass balance, and a soy statement that matches the source. A protein percentage alone can be met by soy isolate, another plant protein or non-protein nitrogen, so it proves neither the hydrolysis nor the source. In one lineIdentity is the agreement of the source statement, the peptide distribution, the nitrogen figure and the mass balance; a protein percentage alone proves none of them. ## The five identity layers A name on a certificate is only a claim until a measurement backs it. Each layer below asks a different question and needs its own result; a supplier who supplies only a protein figure has not described the powder. Five layers of soy protein peptide identity | Layer | What it asks | Method | What it establishes | Document | Are soy and the hydrolysis named? | Name, source, process description | Paperwork only | Protein | How much nitrogenous material is present? | Kjeldahl with the factor stated | Quantity, not the source | Peptide | Is the protein actually hydrolysed? | HPLC distribution with the cut-off stated | The peptide fraction | Mass balance | Is the powder diluted? | Moisture, ash and amino acid profile | Consistency of the numbers | Allergen | Is soy declared? | Source-based allergen statement | The label obligation The layers are independent. A lot can be genuine soy and still be diluted; it can pass protein and peptide and still carry another plant protein; it can be the right source and the wrong hydrolysis. Each needs its own evidence, and the evidence belongs in the batch file rather than in a marketing sentence. ## The peptide-to-protein ratio and the ash ratio The simplest screen is the ratio between the two headline figures. At 90.0% protein and 80.0% peptide on the same basis, the peptide fraction is 88.9% of the protein; the remaining 11.1 points are free amino acids, peptides below the HPLC cut-off and non-protein nitrogen. A wider gap points to a different hydrolysis, a different method or an addition. The ratio also catches the common substitutions. Adding free amino acids raises the Kjeldahl figure while the peptide figure stays flat, so the ratio falls. Selling soy isolate as a peptide raises protein and leaves the peptide fraction low, so the ratio falls further. Diluting with a carrier lowers both figures, so the ratio can look normal while the absolute numbers drop. Ash is a second ratio. At ≤5.0% ash and ≥90.0% protein, the ash-to-protein ratio is at most 0.056. A lot with 90% protein and 8% ash carries either a mineral load or a neutralisation salt that the specification did not intend. Moisture and ash must be converted to the same basis before the mass balance is closed; a dry-basis protein figure added to an as-is moisture figure will not add up. ## Where XRD and FTIR stop Spray-dried soy peptide has no crystal lattice, so an X-ray diffraction scan returns a broad halo instead of sharp peaks. That is what an amorphous hydrolysate should look like, but the halo says nothing about soy and nothing about hydrolysis. Sharp reflections point to something crystalline: a free amino acid, an inorganic salt, a mineral carrier or sugar that crystallised in storage. XRD is not part of the routine release panel here. When a supplier reports “XRD conforms”, ask for the pattern, the reference and the question the test was meant to answer. FTIR is quicker: amide I near 1650 cm⁻¹ and amide II near 1545 cm⁻¹ show the peptide backbone. It confirms the material class, not the source, and cannot separate soy from pea or wheat. ## What adulteration looks like Substitution routes for soy protein peptides and the signals | Route | What it changes | Signal | Test | Soy isolate or another intact protein | Protein high, peptide low | Peptide-to-protein ratio low; opaque dispersion | Peptide HPLC; solubility | Another plant protein | Protein passes, source is not soy | Amino acid profile shift; soy marker absent | Amino acid profile; PCR for soy | Free amino acids | Protein up, peptide flat | Peptide-to-protein ratio low | Peptide HPLC; amino acid profile | Non-protein nitrogen | Kjeldahl up, peptide flat | Amino acid sum short of the protein figure | Amino acid profile; melamine by LC-MS/MS | Maltodextrin or carrier | Both headline figures down | Ash, moisture and mass balance shift | Mass balance; sugar HPLC A PCR test for soy targets DNA, and a highly purified protein can carry little of it, so a negative result supports the file rather than proving absence on its own. The allergen declaration does not depend on the PCR result. Colour proves the least. Off-white to light yellow is a wide window, and a carrier can be milled to match it. The peptide distribution, the amino acid profile and the mass balance carry the real evidence. For soy there is a second control: the allergen statement. A lot sold as soy peptide must carry the soy declaration, and an offer to remove it because the material is hydrolysed gets the obligation backwards. ## How to write identity into the specification - “Hydrolysed soy protein, sold as soy protein peptides, with the soy source named.” - “Protein: ≥90.0% by Kjeldahl; the factor and the moisture basis appear on the COA.” - “Peptide: ≥80.0% by HPLC; column, mobile phase and cut-off named.” - “Moisture ≤7.0%, ash ≤5.0%, ≥95% passing 80 mesh.” - “Amino acid profile and molecular-weight distribution available on request.” - “No added plant protein, free amino acids, non-protein nitrogen or carrier.” - “Soy allergen statement; non-GMO or identity-preserved status only where claimed.” ## Five questions for the supplier - Which soy material went into the hydrolysis, and what enzyme, time and temperature were used? - What factor and moisture basis sit behind the protein figure? - Which HPLC method and cut-off produced the peptide figure, and can you send the distribution? - What is the amino acid profile, and how does its sum compare with Kjeldahl? - What does the soy allergen statement say, and will you support a joint re-test on the retained sample? Five direct answers amount to an identity file. A single protein percentage does not. The product hub carries the catalog grade; the COA page shows where each figure sits on the certificate; the grades page compares the peptide and the isolate; the level-four comparison covers the label consequences; the methods section explains what each assay proves. ### 01 What the COA for walnut protein peptides reports URL: https://nutrition.rainwoodbio.com/products/protein-collagen/walnut-protein-peptides/coa/ Reviewed: 2026-11-19 A walnut protein peptide certificate is read on two axes: how much nitrogen the powder carries, and how much of that protein sits in short chains. The first is a Kjeldahl result with a stated factor and basis; the second is an HPLC distribution with a stated molecular-weight window. The table below gives the catalog limits both results are released against; the batch COA shows a particular pack meeting them. In one lineProtein is a nitrogen calculation and peptide is an HPLC fraction, so the certificate only means something when each figure carries its method, factor, basis and window. ## The certificate as a test report Each line should let a reviewer rebuild the release decision: parameter, method, limit and measured result. A line that says only “conforms” asks the reader to accept the conclusion without the evidence. Walnut peptides make that demand harder than a single-molecule ingredient, because the material is defined by two fractions rather than one identity. Release parameters for walnut protein peptides | Parameter | Method | Release limit | Appearance | Visual | Off-white to light tan powder | Identification | Protein and peptide profile | Conforms to the reference | Protein | Kjeldahl nitrogen | ≥80.0% | Peptide content | HPLC peptide distribution | ≥70.0% | Ash | Gravimetric | ≤5.0% | Moisture | Loss on drying | ≤7.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh ## Kjeldahl protein, the factor and the as-is basis Kjeldahl digestion turns nitrogen into ammonia and measures it; the protein figure is that nitrogen multiplied by a conversion factor. The factor is a convention, not a measurement. Walnut protein is often calculated with 5.30 in nutrition work, while 6.25 is the general food convention, and the two do not give the same percentage from the same result. A powder at 12.8% nitrogen reads 80.0% with the 6.25 factor and 67.8% with the 5.30 factor. Neither number is wrong; they answer different conventions. A certificate that omits the factor cannot be compared with another certificate, even when both describe the same powder. The basis is a second convention. A result can be expressed on the powder as received or after subtracting moisture. At 6.0% moisture, an 80.0% as-is figure works out at about 85.1% on a dry basis. The catalog limit is written as ≥80.0% and leaves the basis to the specification, so the specification has to choose one and keep it across lots. The peptide line needs the same discipline. The HPLC window defines what counts as a peptide, and the percentage should say whether it is a share of the powder or a share of the protein. Without the window, two suppliers can report 70% and mean different fractions. ## Release limit versus batch result Two columns are often conflated: the limit the lot must meet and the value the laboratory found. The first is the specification; the second is the evidence. A result column that repeats the limit has told the reader nothing about the lot. The limit and the measured value belong in different columns | Parameter | Release limit | Result column | Protein | ≥80.0% | A measured percentage, with the factor and the basis | Peptide content | ≥70.0% | A measured percentage, with the HPLC window and the chromatogram | Ash | ≤5.0% | A measured percentage | Moisture | ≤7.0% | A measured percentage | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot Microbiology is a count plus an absence statement, not a single pass word. Heavy metals are a figure for each element, not a total; a sum can hide the element that fails. The peptide line needs the chromatogram and the integration window as well as the percentage. ## What moves between lots The raw material moves first. Walnut variety, growing origin and the oil-pressing step change the meal that goes into hydrolysis, and that meal is the usual starting point for a walnut peptide. A press cake that still carries oil behaves differently from a thoroughly extracted meal, and the difference can show up in colour, odour and the fat that remains. Hydrolysis sets the peptide distribution. Enzyme, dose, temperature, pH and time all shift how far the protein is broken down, and a higher degree of hydrolysis usually means more short chains but also more bitterness. Neutralisation sets the ash, because the salt formed from alkali and acid stays in the powder. Drying and milling set moisture, colour and mesh. Appearance is a coarse check. The catalog range runs from off-white to light tan, and a shade inside that range is not an identity failure. A clear darkening is worth a question about the decolourisation step or the drying hold. Across lots, direction matters more than a single result: peptide falling, ash rising or moisture climbing with the season are trends worth investigating before a limit is breached. The lot code on the certificate should match the pouch, the drum and the retained sample. Without that link, a good result cannot be attached to the pack in the warehouse. ## When an outside test earns its place An outside laboratory is useful for a new source, a first shipment into a regulated market, a label that depends on the peptide figure, or a disputed lot. The panel should target the decision, not repeat the whole certificate. Ask for Kjeldahl with the factor, HPLC peptide distribution with the chromatogram, amino acid analysis, ash, moisture, ICP-MS and microbiology. Three walnut-specific checks are worth adding: the tree-nut allergen statement for the lot, because the declaration follows the source; a walnut protein ELISA or walnut-specific PCR when the source is in question, noting that hydrolysis can weaken both; and a risk-based aflatoxin panel, because walnut is a tree nut and the destination limit depends on the category and dose. Ask the laboratory to report its detection limit for each screen. A “not detected” line without a limit is evidence about the method's sensitivity, not about the sample. Retain the sample that was tested and record the lot; if a result is contested, the referee needs the retained sample, the supplier's certificate and the specification. ## What to compare between suppliers Put six lines side by side: the walnut source and fraction; the protein factor and basis; the peptide window and chromatogram; ash and moisture; the tree-nut allergen statement; and the pack, lot code and retained sample. Two certificates that agree on protein but differ on factor or window are not describing the same powder. The second layer is traceability. The certificate should name who manufactured the lot, which walnut material went in, and which hydrolysis, decolourisation, drying and milling steps were applied. The catalog specification sits on the walnut protein peptides product page. The tests that separate walnut from another plant protein are on the identity page; the grade choices are on the grades page; the HPLC method is described in the HPLC method note; the release workflow is on the quality page. ### 02 Walnut protein peptide grades: peptide, mesh and source URL: https://nutrition.rainwoodbio.com/products/protein-collagen/walnut-protein-peptides/grades/ Reviewed: 2026-11-19 Walnut protein peptides are sold here as one catalog grade: an off-white to light tan powder at ≥80.0% protein by Kjeldahl, ≥70.0% peptide by HPLC, ash ≤5.0%, moisture ≤7.0% and ≥95% through 80 mesh. The grade questions that remain are the walnut fraction, the peptide window, the mesh and whether the powder is granulated. Those four change flow, dust, solubility and the label more than a different trade name does. In one lineA walnut peptide grade is a set of numbers and a named source, not a trade name: the peptide window, the mesh and the walnut fraction decide how the powder runs and what the label can say. ## Why a walnut peptide grade is a specification “Walnut peptide” describes a family, not a single powder. Two suppliers can use the same name for hydrolysates made from different walnut materials, broken down to different degrees, decolourised on different lines and milled to different meshes. The protein figure can agree while the peptide distribution, the ash and the flow behave differently. The starting material is usually defatted walnut meal, the press cake left after walnut oil is extracted. That meal is not a pure protein: it carries fibre, minerals and some residual oil, and the ratio of those components depends on the pressing and extraction route. A peptide made from a lightly pressed meal is not the same powder as one made from a thoroughly defatted meal, even when both are called walnut peptide. On this page the catalog grade is fixed at five lines: protein ≥80.0%, peptide ≥70.0%, ash ≤5.0%, moisture ≤7.0% and ≥95% through 80 mesh. A change to any one is a new specification, not a packing choice. Juglans regia is the usual commercial walnut, but the fraction that goes into hydrolysis can be whole-kernel meal, a press cake or a blend, and the amino acid pattern and colour can differ. ## The catalog grade and the variants that need a new specification Walnut protein peptide forms and what changes | Form | What changes | Why a buyer asks | 80 mesh powder | The catalog grade; no change | Capsules, tablets and powder blends | Granulated, on request | Larger particles, less dust, slower wetting | Blending and capsule feeding | Different mesh | Dissolution rate, mouthfeel, sieve result | A tablet or a suspension needs a different particle size | Higher peptide fraction | A different hydrolysis target and distribution | A label or a formula calls for more short-chain material | Dilution or carrier | Lower peptide per gram; the label ingredient changes | A lower potency is easier to weigh | Walnut protein, intact | Not a hydrolysate; different solubility and label | A protein claim, not a peptide claim The third and fourth rows are often confused. A finer or coarser mesh is a milling change; the chemistry stays the same. A higher peptide figure is a hydrolysis change. A dilution adds a carrier and changes what the label declares. If a supplier offers “walnut peptide 80%” and “walnut peptide 90%”, ask whether the second figure is protein, peptide or a dilution. Granulation changes the particle size and flow without changing the protein or peptide figure, but it does change the mesh result and the way the powder wets out. A granulated grade is a different specification line even when the chemistry is identical. The last row catches label errors. Intact walnut protein is a protein ingredient; walnut peptides are a hydrolysate with different solubility, taste and peptide figure. A switch changes the ingredient, not only the grade. A dilution or a different source is not a grade; it is a different purchase. ## Flow, dust, colour and solubility An 80 mesh powder passes about 177 µm. It flows reasonably in a capsule machine but dusts when poured, and dust can segregate in a blend or settle on equipment. Granulation binds the fines into larger particles, reducing dust and improving flow; the trade-off is slower wetting and a different particle-size result. The catalog appearance is off-white to light tan. Colour moves with the walnut material, the decolourisation step and the drying temperature, and a tan shift inside the range is not a grade failure. The odour is mild and nutty; both matter in a capsule or plain blend, where no flavour system covers them. Solubility is a grade question as well as a process question. The powder is soluble in water and gives a clear to slightly turbid solution. A cloudy solution can come from undissolved fines, a less hydrolysed fraction or a high mineral load; identify the cause before blaming the grade. Test it in the matrix at the concentration the formula will use, not only in water at 1%. Hygroscopicity is the handling property that decides the pack. The 80 mesh powder has more surface area than a granulated grade and picks up moisture faster when a pouch is left open. A granulated grade is still hygroscopic, not a moisture barrier. ## What the grade means in a capsule, tablet or blend A capsule takes the 80 mesh powder directly. The fill weight is set by bulk density and the target peptide amount, and the shell needs a dry room because the powder pulls moisture from the air. A granulated grade can improve flow on a high-speed machine, but it changes the fill weight for the same volume and the label dose has to be recalculated. A tablet needs flow and compressibility. A fine, hygroscopic powder can bridge in the hopper or cap during compression, and granulation is the usual answer; it is a formulation decision, not a cosmetic one. A blend takes the grade that matches the other ingredients in particle size, so it does not segregate. A stick pack takes the grade that disperses in the stated volume, and the mild nutty odour has to be acceptable. The allergen is part of the dosage decision. A walnut peptide carries a tree-nut declaration into every format, so a capsule, a tablet and a blend all inherit the same label obligation. The grade cannot be selected to avoid that obligation; only a different source can. ## What to write into the specification - “Walnut protein peptides, source Juglans regia; state the walnut fraction and the hydrolysis route.” - “Protein ≥80.0% by Kjeldahl; state the nitrogen factor and whether the figure is as-is or dry basis.” - “Peptide content ≥70.0% by HPLC; state the molecular-weight window and the integration method.” - “Ash ≤5.0%; moisture ≤7.0%; appearance off-white to light tan.” - “Particle size ≥95% through 80 mesh; granulated on request as a separate line.” - “Tree-nut allergen statement naming walnut; heavy metals and microbiology as agreed for the destination.” A specification that lists only “walnut peptide 80%” has left the peptide, the mesh and the source open. The product hub carries the catalog values; the COA page shows how each line is reported; the walnut versus soy comparison covers the source question; the HPLC method note explains the peptide distribution; the quality page describes the release file. ### 02.1 Walnut peptides vs soy peptides: two plant proteins, two allergens URL: https://nutrition.rainwoodbio.com/products/protein-collagen/walnut-protein-peptides/grades/walnut-peptides-vs-soy-peptides/ Reviewed: 2026-11-19 Walnut protein peptides and soy protein peptides are both plant hydrolysates, but they come from different botanical families and carry different label obligations. Walnut is a tree nut and must be declared as one; soy is a legume and a major allergen in the EU and the US. The two also differ in amino acid pattern, flavour and the protein figure a buyer can expect. In one lineWalnut and soy are both plant proteins, but only walnut is a tree nut: the allergen statement, the amino acid profile and the label name change with the source. ## Two sources, two hydrolysates Walnut peptides are made from Juglans regia, usually from the defatted meal left after oil pressing. Soy peptides are made from Glycine max, often from soy protein isolate or meal. Both routes use food-grade enzymes, inactivate the enzyme, clarify, concentrate and dry; the result is peptides, free amino acids, ash and moisture, not a pure peptide. Three labels are easy to confuse. Soy protein isolate is the intact protein, ≥90.0% on a dry basis and dispersible rather than soluble. Soy peptides are the hydrolysate and more soluble than the isolate. Walnut peptides are the walnut hydrolysate. Pea protein isolate is a third reference: another plant protein with its own allergen statement and a different amino acid pattern. ## Walnut peptides and soy peptides side by side Two plant peptides compared | Property | Walnut peptides | Soy peptides | Source | Juglans regia, defatted walnut meal | Glycine max, soy protein or meal | Protein figure | ≥80.0% by Kjeldahl in this catalog | ≥90.0% in the soy peptide catalog here | Peptide figure | ≥70.0% by HPLC in this catalog | ≥80.0% in the soy peptide catalog here | Amino acid profile | High in glutamate, arginine and aspartate; lysine first limiting | Higher in lysine; low in methionine | Allergen status | Tree nut (walnut), a major allergen in the EU and the US | Legume (soy), a major allergen in the EU and the US | Colour and odour | Off-white to light tan; mild nutty | Cream to beige; beany | Solubility | Soluble; clear to slightly turbid solution | Soluble as a peptide; the isolate is dispersible and opaque | Label name | Walnut protein peptides or hydrolysed walnut protein | Soy protein hydrolysate or hydrolysed soy protein | Regulatory question | Tree-nut declaration; source and history | Soy declaration; source and history The protein row is not like-for-like. The soy peptide catalog is set at ≥90.0% protein and ≥80.0% peptide; the walnut catalog at ≥80.0% and ≥70.0%. Compare at the same factor, basis and peptide window, or the comparison is only about the source. ## Protein, peptide and the amino acid gap Protein and peptide are separate figures for both materials. A hydrolysate can report a high protein figure because it is rich in nitrogen, while the peptide fraction in the chosen window is lower. Ask for the protein method and factor, the peptide method and window, and the amino acid profile. A comparison built on protein alone misses the difference that matters. The nitrogen factor is the first trap. Walnut protein is often calculated with 5.30, soy protein with 5.71, and 6.25 is used widely for both. The same nitrogen result therefore produces different percentages, and a 90% soy figure and an 80% walnut figure may be closer than they look once factors and bases are aligned. The amino acid pattern is the second difference. Walnut protein is high in glutamic acid, arginine and aspartic acid, with lysine first limiting. Soy protein carries more lysine and is limiting in methionine; pea protein has its own pattern. A blend can close both gaps, but each profile should be on file before the blend is designed. The peptide fraction is a hydrolysis target, not a purity grade. A walnut peptide at ≥70.0% and a soy peptide at ≥80.0% were taken to different degrees of hydrolysis, and the difference shows in solubility, bitterness and the label figure. ## The allergen question In the EU, Regulation (EU) No 1169/2011 Annex II lists soy and nuts, and walnuts are named in the nut entry. In the US, FALCPA lists soy and tree nuts as major food allergens. Both materials need an allergen declaration, a control plan and a cleaning validation between runs. The declaration is not optional and hydrolysis does not remove it. Walnut allergens include the seed storage proteins Jug r 1 (2S albumin), Jug r 2 (7S vicilin) and Jug r 4 (11S globulin), plus the lipid-transfer protein Jug r 3. Some are stable, and peptides can retain IgE-binding after hydrolysis. A walnut peptide cannot carry a “tree-nut-free” claim, and a soy peptide cannot carry a “soy-free” claim. A shared line needs cross-contact control and, where risk remains, an advisory statement the cleaning validation supports. “Tree-nut free” and “soy free” are claims, not synonyms for “plant-derived”. Each needs a supplier statement, a cross-contact assessment and, where required, a lot test. The destination text and the brand's reviewer decide the wording; the certificate does not approve a claim. The methods library covers the ELISA and PCR formats a source or allergen question may need. ## Colour, odour and solubility in the formula Walnut peptides are off-white to light tan with a mild nutty odour; soy peptides are cream to beige with a beany note. Both can turn bitter as hydrolysis rises, because short hydrophobic peptides are part of what makes a hydrolysate soluble. Taste follows the hydrolysis route, not only the source, so a sample is the only reliable guide for a flavoured drink. A badly stored walnut lot can also develop a rancid note from residual oil. Solubility separates the categories. Walnut peptides give a clear to slightly turbid solution, which suits a stick pack or fortified water. Soy peptides are soluble as a hydrolysate, but soy protein isolate is only dispersible and gives an opaque suspension. For a clear drink, compare peptide with peptide, not peptide with isolate. In a capsule or tablet, colour and odour matter more than clarity, because there is no water or flavour system to hide them. ## When each one fits, and what changes on a switch Choose walnut peptides when the label can carry a tree-nut declaration, a mild nutty note is acceptable and the arginine-rich profile fits. Choose soy peptides when the formula needs soy's lysine contribution and the soy declaration is acceptable. Choose soy isolate for intact protein and a protein claim, and pea isolate when a legume other than soy is preferred. None is a drop-in for another. A switch is a new specification, not a substitution at the weigh-up. It changes the allergen statement, the label name, the amino acid profile, the taste and often the stability of the blend. Run the new material through the same identity, stability and label review as a new supplier, and keep the old and new certificates apart. The walnut protein peptides hub carries the catalog values; the identity page covers the source tests; the grades page covers mesh and granulation; the HPLC method note explains the peptide distribution; the quality page describes the release file. ### 03 Walnut protein peptides: moisture, walnut oil and the pack URL: https://nutrition.rainwoodbio.com/products/protein-collagen/walnut-protein-peptides/stability/ Reviewed: 2026-11-19 Walnut protein peptides are hygroscopic and carry a little residual walnut oil, so two things shorten the shelf life: water that cakes the powder and oxygen that turns the oil rancid. The release limits are moisture ≤7.0% and ash ≤5.0%; neither is a storage allowance. A sealed foil pouch or a lined drum, a cool dry store and a short opening routine are the practical controls, and any aqueous solution needs its own hold study. In one lineMoisture and residual walnut oil are the two shelf-life variables: the seal keeps water out, and the fat limit and the pack keep the powder from going rancid. ## The powder: moisture, caking and odour The moisture limit at release is ≤7.0%. That is a gate, not an allowance for the months that follow. Once the pouch is open, the powder moves toward the humidity of the room; the surface absorbs water first, particles stick, and the powder can cake before the analytical result moves. An 80 mesh powder exposes a large surface, so it takes up moisture faster than a granulated grade. Granulation slows the rate; it does not make the material hydrophobic. Colour and odour are the early warnings. The catalog range is off-white to light tan; a darker patch at the surface can be a moisture or heat effect, and a rancid or painty note points to oxidation of the residual walnut oil. Walnut oil is rich in polyunsaturated fatty acids, which is why even a defatted meal is not automatically fat-free. The specification should carry a fat limit or a peroxide value where the application is sensitive to odour. Temperature belongs in the same paragraph. A warm room speeds both moisture movement and lipid oxidation, while a cold room can leave condensation on a pack brought back into the warm. Let a cold pack reach room temperature before opening it. ## The solution: clear to slightly turbid, and time-limited The powder dissolves in water to a clear to slightly turbid solution. Once dissolved, it is exposed to heat, pH, oxygen and microbes at the same time; a result on the dry powder cannot predict the hold time of the drink. A hot fill or a pasteurisation step is a heat load the powder never sees. A stick pack avoids that load because the consumer adds water at use. If a liquid is required, fix the pH, reduce dissolved oxygen, keep the solution dark and validate the hold before the filler is set. Turbidity is not automatically a failure. Fine particles, a less hydrolysed fraction and a mineral load can all cloud a solution. Bitterness can also rise with the degree of hydrolysis and with storage, so taste the matrix at the end of the hold, not only at the start. ## What drives change during storage Factors that move walnut protein peptides during storage | Factor | Effect on the powder | Control | Moisture | Caking, microbial growth, lower as-is protein | Sealed pouch or lined drum; desiccant where needed | Heat | Browning, odour change, faster moisture movement | Cool, dry store | Oxygen | Oxidation of residual walnut oil; rancid odour | Low headspace; sealed pack; nitrogen where specified | Light | Colour change at the powder surface | Opaque or foil pack; dark store | pH | Solution only; changes solubility and colour | Validate the matrix pH; buffer if needed | Reducing sugars | Maillard browning with peptides and heat | Specify the carbohydrate profile; control heat and moisture | Residual lipid | Rancidity; odour and taste change | Fat limit; antioxidant strategy if the matrix needs one | Metal ions | Colour and complexation in solution | Avoid iron and copper contact No factor acts alone. A warm, humid store is worse than the sum of two separate effects, and a clear bottle of solution on a bench adds light, oxygen and time. The practical question is not whether the ingredient is stable in the abstract, but whether this pack at this condition holds the protein, peptide, colour and odour for the claimed period. ## A stability protocol for the ingredient The protocol names the pack, the condition, the time points and the tests. Long-term storage is held at 25 °C and 60% relative humidity; the intermediate condition is 30 °C and 65% relative humidity; the accelerated condition is 40 °C and 75% relative humidity. Add a light-exposure arm for the colour change that a dark chamber will not show. Analyse protein with the factor, peptide with the same window as release, plus moisture, ash, appearance, odour, solubility and microbiology. Where residual lipid is a concern, add fat and peroxide value at each point. For a stick pack or a drink, repeat the work in the matrix at the process pH and heat load. Show the individual results, not a pass line, and identify the pack and the lot family. Buy data for the pack you will use. A pouch and a drum differ in headspace, opening history and surface area, so a summary for one does not answer for the other. ## When the powder becomes a formula Capsules and tablets keep water activity low, yet the shell and the excipients may still pass moisture to a hygroscopic fill. Check moisture and fill appearance at release and after storage. Powder blends are more exposed. A reducing sugar in the same blend can brown with the peptide under heat and moisture, even at a water activity that looks acceptable. The colour change is easy to miss in a coloured blend, so keep an unflavoured control beside it. A stick pack adds the seal to the list: a pinhole fails the pack, so inspect the strip as well as the powder. A drink adds pH, heat and oxygen. An overage is a label and stability decision; it does not fix a pack that leaks moisture. ## How the shelf life is set No single shelf-life figure is published for the ingredient. The retest period is assigned per pack and supported by the file for that pack; a number without those conditions is a marketing statement, not a shelf life. At the end of the retest period, re-test the retained sample before extending. Do not extend on assumption or move a bulk figure to a repack. The pack details sit on the product hub; the release tests are on the COA page; pack and lead time are on the MOQ page; the microbiology method note explains the count; the quality page covers release. ### 04 Walnut protein peptides: MOQ, packs and quotation URL: https://nutrition.rainwoodbio.com/products/protein-collagen/walnut-protein-peptides/moq/ Reviewed: 2026-11-19 The order starts at 1 kg in a foil pouch, and the production pack is a 25 kg fiber drum. Standard powder ships in 1–7 days from confirmation. A usable quotation names the walnut source, the protein factor and basis, the peptide window, the mesh, the pack, the destination and the tree-nut allergen statement, because those details decide what is actually sent. In one lineOne kilogram is the trial unit because one lot code can cover the bench trial, the retained sample and an outside allergen or identity test. ## Why the smallest pack is one kilogram One kilogram is enough to run a trial, keep a retained sample and send a portion to an outside laboratory, without opening a production drum. It also ships as a parcel, which helps when the trial is waiting on material. Smaller quantities come from splitting a larger lot. That is a repack: it adds handling, breaks the original pack identity and makes the lot chain harder to follow. The chemistry does not change, but the traceability does. A buyer who needs 100 g for a bench test is buying a repack, not a catalog unit, and the quotation should say so. The 25 kg drum lowers the handling per kilogram and ties up more inventory for longer. The minimum is about the pack, not about pushing volume. ## Packs and formats Walnut protein peptide packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Particle profile changes; separate specification The catalog powder is milled to 80 mesh (≥95% through). Granulation is a separate specification: it changes the particle-size line and the flow, and it should be quoted as a change, not slipped into the same pack code. The foil pouch is the moisture barrier for a 1 kg order; the drum relies on its inner liner, so the liner has to be closed after sampling. Neither pack makes the powder non-hygroscopic. ## Lead time and dispatch Standard powder is quoted at 1–7 days from confirmation. Picking, paperwork and dispatch sit inside that window; transit, customs and the customer's own release do not. A granulated or otherwise custom pack needs its own date. Ask for the dispatch date. The Incoterm decides who books freight and who clears entry, and the documents should be on the same lot as the powder. ## What a quotation needs Six details make a quotation comparable: - The material and its source. Walnut protein peptides, with the walnut fraction and hydrolysis route named. - The specification. Nitrogen factor and basis, peptide window, ash, moisture and mesh. - The pack. 1 kg pouch, 25 kg drum or a granulated variant. - The destination and Incoterm. The delivery point and the trade term. - The document set. COA, specification, SDS and the tree-nut allergen statement. - The intended use and market. Supplement, food or another use, and where it will be sold. Without the source, the peptide figure and the market, a quotation is only a weight and a pack. Commercial terms are stated on the quotation, not on this page. ## Qualifying a sample The 1 kg pouch is the qualification unit. Test identity, protein, peptide, moisture, microbiology and the allergen statement, then keep part of the same pack as the retained sample. The lot code should appear on the sample, the COA and the quotation. A sample with no lot code cannot support a specification decision, however good the result looks. A bench-scale split is a repack, not the catalog pack. Ask for it explicitly and record it. The trial lot and the production drum are not guaranteed to be the same lot. ## Terms to agree before ordering The quotation carries the commercial terms; the quality agreement carries the rest. Write down the revision of the specification, one COA per lot, the sample kept for reference, how long the material can be held, and how a change to the source or process is approved. Those five lines prevent most disputes. If a lot fails, use the retained sample and a joint re-test. A photograph is not evidence. Agree the referee laboratory and who pays for it before the dispute, not after. The product hub holds the catalog data; the COA page lists the release tests; the compliance page covers the tree-nut allergen file; the MOQ glossary entry defines the term; the quality page describes release. ### 05 The regulatory file for walnut protein peptides URL: https://nutrition.rainwoodbio.com/products/protein-collagen/walnut-protein-peptides/compliance/ Reviewed: 2026-11-19 A walnut protein peptide file has to answer four questions: what the material is, which lot is being released, whether the destination allows the ingredient, and what the label must say about the tree nut. The buyer's regulatory team confirms the route for the destination; this page sets out the documents and the allergen logic that review depends on. No novel-food, NDI or permitted-ingredient status is asserted here. In one lineWalnut is both the source and the allergen: the label has to name it, the lot file has to carry the statement, and the buyer's team has to confirm the route for the destination. ## What the file has to answer The file has four jobs. It identifies the material and the specification revision; it ties the release to a lot and a certificate; it sets out the route, limits and label for the destination; and it records what happens when the source, process or pack changes. The certificate, the technical data sheet and the safety data sheet each answer part of that, and none answers the route on its own. Walnut adds one document that a generic protein file may not have: a tree-nut allergen statement that names both the source and the class. “Tree nut” without walnut is incomplete, and “walnut” without the class can be missed by a reader scanning for the class. The statement belongs in the controlled document set, with a version, not only on the certificate. Other markets maintain their own lists. Canada includes walnut among tree nuts, and Australia and New Zealand require tree-nut declarations under the Food Standards Code. The current text of each destination is the reference, and the buyer's team keeps the evidence with the order. ## European Union Regulation (EU) No 1169/2011 Annex II lists walnuts under nuts, so a walnut peptide must be declared in the ingredient list and emphasised by typography. There is no threshold below which the declaration can be dropped, and the fact that the protein has been hydrolysed does not create an exemption. The declaration follows the source. The first EU question is novel food. Regulation (EU) 2015/2283 covers food that was not used for human consumption to a significant degree in the Union before 15 May 1997. Whether a particular walnut hydrolysate falls inside that definition depends on its history and its process, so the buyer's team checks the novel food catalogue and the evidence for the exact material. No status is asserted here. The rest of the file draws on Regulation (EC) No 1924/2006 for claims, Commission Regulation (EU) 2023/915 for contaminants and the food-information rules for labelling. Great Britain has its own retained rules, and Northern Ireland follows the EU list; the buyer confirms which applies and keeps the evidence with the order. Verify the current text, because these instruments are amended. ## United States In the US, tree nuts are a major food allergen under FALCPA, and walnut is a tree nut. The label must name the source in plain language, either in the ingredient list or in a “Contains” statement. The refined-oil exemption in the statute does not reach a protein hydrolysate: it is written for highly refined oils, not for a peptide powder, and a supplier who invokes it for this material has not shown the basis. Start with the intended use and the basis for the ingredient. A dietary supplement ingredient is assessed under the Federal Food, Drug, and Cosmetic Act as amended by DSHEA. If it is a new dietary ingredient, the 21 CFR 190.6 notification is due at least 75 days before marketing; the buyer's team decides whether that applies. 21 CFR 111 covers cGMP and 21 CFR 101 covers labelling. ## Contaminants and limits The contaminant calculation belongs to the finished product, not to the drum. The destination text and the daily dose set the limit; the table below is the list of questions to ask, not a set of universal numbers. Contaminant questions for a walnut peptide file | Parameter | Why it belongs in a walnut file | What the file should show | Lead (Pb) | A general supplement contaminant | Lot result, method, limit and dose calculation | Cadmium (Cd) | Nuts can accumulate it | Lot result and any category exception | Mercury (Hg) | A general supplement contaminant | Lot result and method | Arsenic (As) | A market or customer limit | The agreed limit and method | Aflatoxin | Tree nuts can carry it | A risk-based panel and the destination limit | Microbiology | Powder handling and water activity | Counts and absence tests Aflatoxin is the walnut-specific item that a generic certificate may not cover. The catalog specification here does not list it, so the buyer should ask whether the source monitors it and whether the lot can be tested against the destination limits. Pesticides and residual solvents are separately agreed. ## Claims and the label No disease claim is made for this ingredient. In the EU, a protein claim is calculated on the finished product: “source of protein” needs at least 12% of the energy value from protein, and “high protein” needs at least 20%. In the US, “good source” is 10% or more of the daily value per reference amount, and “excellent source” or “high” is 20% or more. “Peptide” describes a fraction; it is not an authorised health claim, and the figure behind it must be on the specification if the label uses the word. The allergen wording is not a marketing choice. A walnut peptide cannot carry a “tree-nut-free” claim, and a “walnut-free” claim would be false. A “may contain” statement needs a cross-contact assessment and cleaning validation behind it; the FDA does not define the phrase, so the wording should follow the control, not habit. The brand's reviewer decides the final label; the certificate does not approve a claim. ## The document set - Specification with the revision number, the walnut source, the nitrogen factor, the peptide window and the mesh. - Certificate of analysis for the lot, with methods, limits and measured results. - Technical data sheet and safety data sheet. - Tree-nut allergen statement naming walnut, with the cross-contact controls for the line. - Origin record, contaminant results, microbiology and any customer-specific declaration. - Nutritional data for the protein and peptide figures, with the calculation basis. - Position on the destination route and the supporting documents the buyer's team needs. ## Checklist before the first order - The specification version, the walnut source and the hydrolysis route are named. - The novel-food or dietary-ingredient route is confirmed by the buyer's regulatory team for the destination. - The tree-nut allergen statement names walnut and matches the lot. - The heavy-metal and aflatoxin results are recalculated for the finished-product dose. - The label, the nutrition panel and the claim wording have been reviewed for the market. - Change control covers the source, the process and the pack, and the quotation, specification and certificate refer to the same version. Catalog values are on the product hub; the lot certificate is explained on the COA page; the source evidence is on the identity page; the framework references are in the EU and US regulatory notes; the release file is described on the quality page. ### 06 How to prove a walnut protein peptide lot is walnut URL: https://nutrition.rainwoodbio.com/products/protein-collagen/walnut-protein-peptides/identity/ Reviewed: 2026-11-19 A walnut protein peptide lot is the named material when the source record, the nitrogen figure, the peptide distribution and the amino acid pattern agree. The protein figure alone proves neither the source nor the peptide fraction; a soy or pea hydrolysate can be blended to the same nitrogen number. The tree-nut allergen statement belongs to the same lot. In one lineA walnut peptide lot is identified when the source record, the Kjeldahl figure, the HPLC peptide curve and the amino acid pattern agree, and the tree-nut allergen statement follows the same lot. ## The identity layers A certificate can name the right material and still fail to prove it. The layers below are separate questions, and each needs its own evidence. A supplier who answers only the first has described the paperwork, not the powder. Five layers of walnut protein peptide identity | Layer | Question | Test | What it proves | Document | Is the source named? | Name, walnut fraction, hydrolysis route | Paperwork only | Nitrogen | Is it protein-rich? | Kjeldahl with the factor stated | Total nitrogen, not the peptide fraction | Peptide distribution | Is the fraction in the window? | HPLC with the chromatogram | The short-chain fraction | Amino acid pattern | Is the source walnut? | Amino acid analysis | A source fingerprint | Mass balance | Is it diluted? | Protein, peptide, ash and moisture together | Consistency of the numbers ## The protein-to-peptide ratio and the nitrogen factor Protein is calculated from nitrogen: the Kjeldahl result multiplied by an agreed factor. The factor is an assumption, and it belongs on the certificate. Walnut protein is often calculated with 5.30 in nutrition work, while 6.25 is the general food convention; the same nitrogen gives a different percentage under each. Peptide content is measured by HPLC and counts the fraction that falls inside the molecular-weight window the method defines. The two figures describe different parts of the same powder, and peptide should not exceed protein: a peptide result above the protein result means the methods, the bases or the calculations do not line up. The gap between the two is informative. A powder at 85% protein and 72% peptide has a 13-point gap that can hold free amino acids, larger peptides and non-protein nitrogen. A powder at 85% protein and 50% peptide is not the same material, even though the protein line looks stronger. The gap is the first place to look when a lot is suspected of being under-hydrolysed or extended with a nitrogen source. Ash and moisture close the mass balance. At the catalog limits, ash ≤5.0% and moisture ≤7.0% leave room for the protein, the peptide and a small amount of fat and carbohydrate. A high ash points to the neutralisation salt; a high moisture dilutes the as-is protein and feeds caking. Neither is an identity test on its own, but a lot that reports 80% protein with 12% ash and 10% moisture has an arithmetic problem. The amino acid pattern is the source check. Walnut protein is high in glutamic acid, arginine and aspartic acid, and lysine is the first limiting amino acid. Soy protein carries more lysine, and pea protein has its own pattern. A hydrolysate that reports a soy-like lysine figure under a walnut label needs an explanation. Tryptophan needs its own hydrolysis method because acid hydrolysis destroys it; a certificate that reports tryptophan from a standard acid hydrolysis has reported a number it cannot defend. ## X-ray diffraction: what it can and cannot show Walnut protein peptides are amorphous after spray drying, and X-ray diffraction is not a routine identity test for them. The pattern is a broad halo, and a “conforms” statement against an amorphous reference adds little. XRD becomes useful when the question is whether the powder contains a crystalline carrier, a salt from neutralisation or a crystalline amino acid blend; a sharp pattern is a signal to ask what else is in the blend. If a supplier offers XRD as identity evidence, ask for the pattern, the reference and the detection limit. It does not measure the peptide fraction and it does not prove the walnut source. It is a supporting solid-state check, not a substitute for the nitrogen, peptide and amino acid data. ## What adulteration looks like Common walnut peptide substitutions and the signals | Adulterant | What it does | Signal | Test | Soy peptides | Raises protein and lysine | Lysine high for walnut; soy protein detected | Amino acid profile, soy ELISA | Pea peptides | Raises protein with a cheaper legume | Pea-specific protein or DNA | Amino acid profile, pea ELISA or PCR | Wheat or gluten hydrolysate | Raises protein with a non-walnut source | Glutamate and proline pattern; gluten detected | Amino acid profile, gluten ELISA | Free amino acids | Raises the nitrogen figure | Peptide low against protein | HPLC distribution, amino acid analysis | Maltodextrin or dextrose | Dilutes the powder | Protein and peptide low; sugar present | Mass balance, sugar profile | Non-protein nitrogen | Raises Kjeldahl without peptide | Protein high, peptide low, ammonia present | Ammonia or urea test, peptide HPLC | Moisture | Lowers the as-is protein | Moisture high; dry-basis figure normal | Loss on drying The simplest substitutions are the ones that move the protein figure, because the protein figure is the number most buyers check first. The peptide figure, the amino acid pattern and the ash are the checks that make the substitution visible. Colour is the weakest signal: off-white to light tan covers a wide range of powders, including blends. ## How to write the identity into the specification - “Walnut protein peptides, source Juglans regia; state the walnut fraction and the hydrolysis route.” - “Protein ≥80.0% by Kjeldahl; state the nitrogen factor and whether the figure is as-is or dry basis.” - “Peptide content ≥70.0% by HPLC; state the molecular-weight window and the integration method.” - “Amino acid profile on file, with lysine and tryptophan reported by a validated method.” - “Ash ≤5.0%; moisture ≤7.0%; appearance off-white to light tan; ≥95% through 80 mesh.” - “No soy, pea or wheat protein above the agreed limit; tree-nut allergen statement for the lot.” - “Walnut protein ELISA or PCR result where the source is in question.” A specification built this way gives the laboratory something to test and the buyer something to compare. A single line that says “walnut peptide 80%” gives neither. The product hub carries the catalog values; the COA page shows where each figure sits on the certificate; the grades page covers the peptide and mesh choices; the walnut versus soy comparison covers the source question; the HPLC method note explains the separation; the quality page describes the release file. ## Five questions for the supplier - Which walnut fraction and hydrolysis route produced this lot, and is the source named on the certificate? - What are the protein factor, the assay basis and the peptide molecular-weight window? - Can you provide the peptide chromatogram and the amino acid profile, not only the protein percentage? - What are the ash and moisture results, and how do they close the mass balance? - If the lot is disputed, will you accept a joint re-test on the retained sample? Five direct answers amount to an identity file. A single protein percentage does not. ### 01 What the COA for wheat protein peptides actually contains URL: https://nutrition.rainwoodbio.com/products/protein-collagen/wheat-protein-peptides/coa/ Reviewed: 2026-11-19 A wheat peptide COA has to answer three questions at once: how much protein the lot contains, how much of it is peptide, and whether the wheat allergen is declared. The protein and peptide figures depend on the Kjeldahl factor, the basis and the HPLC cut-off, so none of them is portable without its method. The certificate should also show moisture, ash, contaminants, microbiology and the mesh. In one lineA wheat peptide certificate only makes sense when the Kjeldahl factor, the peptide method and the wheat/gluten statement are read together; the protein percentage alone does not describe the lot. ## The certificate as a line-by-line report The release lines below are the catalogue specification. A lot certificate repeats them with measured results and names the method used for each one. A row that says only “conforms” cannot be compared with another supplier's certificate. Release specification · wheat protein peptides | Parameter | Method | Release limit | Appearance | Visual | Off-white to light tan powder | Protein | Kjeldahl; nitrogen factor stated | ≥80.0% | Peptide content | HPLC; method and cut-off stated | ≥70.0% | Moisture | Gravimetric | ≤7.0% | Ash | Gravimetric, furnace | ≤5.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh Identification is a separate conclusion. “Protein and peptide profile conform” should be backed by a chromatogram. The source is wheat, and the gluten statement sits beside it; the protein percentage cannot prove either. ## Protein, peptide and the basis behind them Kjeldahl is a nitrogen method. The laboratory digests the powder, distils the ammonia and multiplies nitrogen by a factor. Wheat commonly uses 5.70; 6.25 is also seen. Same nitrogen, different answer: 80.0% at 5.70 becomes 87.7% at 6.25. The basis is the other variable. The catalogue gives protein ≥80.0% and moisture ≤7.0% but does not state as-is or dry. At 7.0% moisture, 80.0% dry is 74.4% as-is. The certificate must print the basis and the factor, or the number cannot be compared. Peptide is measured by HPLC and needs a definition: column, standards and cut-off. At the floors, 70.0 ÷ 80.0 = 0.875, so 87.5% of the protein is counted as peptide. The gap may be larger chains, free amino acids or non-protein nitrogen. A peptide result above the protein result means the methods disagree, not that the powder is better. Gluten is a different question. It is a protein fraction of wheat, and the allergen declaration is not derived from the protein percentage. A lot can be 80% protein and still contain gluten peptides. ## Release limit versus batch result Release limits and results are different columns. The limit is the gate; the result is the measurement. A result column that repeats the specification has not reported a lot. What the result column should contain | Parameter | Release limit | Result column | Protein | ≥80.0% on the stated basis | The measured percentage, the nitrogen factor and the basis | Peptide content | ≥70.0% by HPLC | The measured percentage and the HPLC method | Moisture and ash | ≤7.0% and ≤5.0% | A measured percentage for each | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot | Particle size | ≥95% through 80 mesh | The measured percentage through the sieve | Wheat and gluten | Source declaration; gluten line where claimed | The source statement, and a gluten result in mg/kg if a claim is made The certificate should let a reader reconstruct the pass. Microbiology needs a count plus an absence statement; heavy metals need a figure per element; the wheat line needs a source statement. A gluten-free statement needs a method, a limit of quantification and the destination limit, not just the words. ## What moves between lots Wheat is a crop. Protein, gluten fraction and ash vary with class, variety, season and origin. Vital gluten and flour give different baselines, and colour and ash follow the raw material. Hydrolysis is the next variable. Enzyme, dose, time and temperature set the peptide curve. A long hydrolysis raises free amino acids and can taste bitter or savoury; a short one leaves large peptides that can haze. Neutralised deamidation adds salt and ash. Drying and milling set moisture, colour and mesh. A hot dryer can darken the powder; ash near 5.0% can taste salty or haze a drink. Colour inside off-white to light tan is not an identity failure, but a shift outside it deserves the batch record. ## When an outside test earns its place Order outside testing for a new source, a first regulated shipment, a gluten claim or a dispute. Ask for protein with factor and basis, peptide and distribution, amino acids, moisture, ash, ICP-MS, microbiology and a gluten method fit for hydrolysates. Gluten testing is method-sensitive. R5 sandwich ELISA is the Codex-aligned screen for intact gluten; a hydrolysed protein can lose the epitopes it targets, so a validated hydrolysate method or a competitive format may be needed. Ask for extraction, standard and limit of quantification. “Not detected” without a limit says nothing about absence. Wheat also carries Fusarium mycotoxins, especially deoxynivalenol. Ask for a DON result and the destination limit. Keep the tested sample as the retained sample and match the lot code. ## Six lines to compare between suppliers Six lines: source and gluten statement; protein factor and basis; peptide method; moisture, ash and mesh; contaminants and mycotoxins; traceability. A match on protein alone is not a match on material. The catalogue specification sits on the wheat protein peptides product page. The tests that support the source and the peptide figures are on the identity page; the label consequences are on the compliance page. The analytical methods library explains the HPLC and Kjeldahl work, and the quality page describes the release workflow. ### 02 Wheat protein peptides: choosing a grade and a form URL: https://nutrition.rainwoodbio.com/products/protein-collagen/wheat-protein-peptides/grades/ Reviewed: 2026-11-19 Wheat protein peptides are sold against one catalogue specification, but that does not make every lot interchangeable. The buyer still chooses the wheat starting material, the hydrolysis endpoint, the mesh and whether a carrier is used. Those four choices show up in solubility, flavour, flow and the allergen file. In one lineThe protein and peptide minimums are fixed; the real choice is the wheat starting material, the hydrolysis endpoint, the mesh and the carrier, because each one changes how the powder behaves and what the label says. ## Why one specification still leaves choices The catalogue is a floor, not a menu of grades. Protein ≥80.0%, peptide ≥70.0%, ash ≤5.0%, moisture ≤7.0% and ≥95% through 80 mesh apply to every lot. What varies is the raw material and the process window. The starting material decides the baseline. Vital wheat gluten is mostly protein; flour and a protein concentrate bring starch, fiber and ash, so more of the powder is non-protein. The choice also changes colour, flavour and the gluten story. The hydrolysis endpoint is the second lever. Within the ≥70.0% peptide gate, a shorter cut leaves larger peptides and a milder taste; a longer cut raises small peptides and free amino acids, so the powder dissolves faster but can taste bitter or savoury. The certificate should show the distribution, not only the pass mark. ## Four practical options Four options sit behind the single specification. The first two are catalogue formats; the other two are development briefs or customer-specific work that has to be written into the specification and the label. Practical wheat protein peptide options | Option | What changes | Catalogue status | Typical use | Standard 80 mesh powder | Fine powder; wets quickly; dusts when poured | Catalogue format | Capsules, sticks, powder blends | Granulated powder | Better flow, less dust, different bulk density | On request | Tablets and high-speed filling | Tighter peptide cut | More small peptides and free amino acids | Development brief | Clear drinks and fast sticks | Diluted premix | Lower protein and peptide per gram; label changes | Customer-specific | Low-dose formats and flavour systems A tighter cut is not automatically correct. Longer hydrolysis can taste less neutral, lift a drink's osmolality and lower yield; the dosage form and the sensory target should decide. ## Inside the drum The physical targets are narrow enough to test and wide enough for raw-material variation. Appearance is off-white to light tan; colour moves with the wheat source and the dryer, and a shift inside the window is not an identity failure. Physical targets and what they decide | Attribute | Target | What it decides | Appearance | Off-white to light tan powder | Colour consistency, not identity | Solubility | Clear to slightly turbid in water | Clarity in sticks and drinks | Moisture | ≤7.0% | Caking and shelf life | Ash | ≤5.0% | Taste, haze and mineral load | Particle size | ≥95% through 80 mesh | Wetting, flow and dust At 5.0%, ash is a wide gate: a lot near the edge can taste salty or cloud a clear drink, particularly after an acid or alkali step is neutralised. A clear beverage needs a tighter internal target. Flavour is not in the table because it is hard to certify, but it belongs in the trial: wheat peptides carry a mild savoury note that strengthens with hydrolysis and storage, and a capsule can mask it while a stick pack cannot. ## In the finished product Capsules and tablets are judged by flow, bulk density and compressibility. The fine powder fills a capsule well, while a granulated lot runs faster and dusts less. Tablets normally require granulation, which introduces water and heat that the stability work must include. For a stick pack or blend, wetting, dissolution and flavour matter most. The powder dissolves readily, although a high-molecular-weight shoulder or a lot near the ash limit can leave haze. Wheat flavour is more exposed than in a capsule, so test the flavour system against the actual lot. When soy or pea protein is also in the blend, declare each allergen separately. Gummies and drinks bring water, heat and often a reducing sugar, a combination that can brown the peptide and change colour before any analytical result moves. Only a bench trial at the real process temperature will show it. ## Writing the specification A useful purchase specification records the decisions, not just the product name. The lines below should appear in the specification and, where relevant, on the label. - “Wheat protein peptides; wheat source and gluten statement named.” - “Protein ≥80.0% by Kjeldahl; nitrogen factor and basis printed.” - “Peptide content ≥70.0% by HPLC; method and cut-off named.” - “Moisture ≤7.0%; ash ≤5.0%; appearance off-white to light tan.” - “Particle size ≥95% through 80 mesh; granulated on request.” - “Heavy metals and microbiology as listed; mycotoxin statement where required.” - “No carrier unless declared; wheat allergen statement on file.” An order for “wheat peptide 80%” leaves the source, the hydrolysis degree, the mesh and the allergen statement open. Those are the lines that decide whether the powder works in the dosage form. ## When this is not the right material If the label needs a gluten-free or celiac-safe claim, this material does not provide it by default. It is wheat-derived, and hydrolysis does not remove the wheat allergen or guarantee that gluten is below a claimed limit. That claim needs a validated test and the destination condition. If the formula needs a high-lysine protein, wheat is a poor fit: wheat protein is low in lysine, and soy or pea protein carries more. If the label needs collagen, this powder has no hydroxyproline marker and is not a collagen. The soy protein isolate page and the pea protein isolate page show the alternatives, each with its own allergen. The product hub carries the catalogue ranges; the COA page explains how protein and peptide are read; the stability page covers moisture and browning; the wheat peptides versus gluten page takes the allergen question further. The analytical methods library explains the HPLC work, and the quality page describes the release file. ### 02.1 Wheat peptides vs gluten: the hydrolysate and the allergen URL: https://nutrition.rainwoodbio.com/products/protein-collagen/wheat-protein-peptides/grades/wheat-peptides-vs-gluten/ Reviewed: 2026-11-19 Wheat protein peptides are hydrolysed wheat protein, usually made from wheat gluten; gluten is the intact protein complex, not another name for the peptide. Hydrolysis cuts the chains and changes solubility and function, but it does not remove the wheat allergen, and it does not make the material gluten-free by itself. The two are related materials with different specifications and different label consequences. In one lineHydrolysis cuts wheat gluten into peptides; it changes the molecular size and the function, not the wheat allergen, and it does not make the material gluten-free by itself. ## The hydrolysate and the gluten Gluten is the protein fraction of wheat that remains when starch is washed away. It is a complex of gliadins and glutenins, and its function in dough comes from the way those proteins hydrate and cross-link. Wheat protein peptides are made by treating wheat protein, usually vital wheat gluten, with enzymes that cut the chains into shorter peptides. Wheat gluten and wheat protein peptides · what changes | Property | Wheat gluten | Wheat protein peptides | What it is | Intact wheat storage protein complex | Enzymatically hydrolysed wheat protein | Composition | Gliadin and glutenin, largely intact | Shorter peptides and some free amino acids | Solubility in water | Low; hydrates into a viscoelastic mass | Soluble; clear to slightly turbid solution | Function | Dough structure, elasticity, baking | Protein enrichment, solubility, flavour | Specification | Protein and gluten content | Protein ≥80%, peptide ≥70%, ash ≤5% | Wheat allergen | Present | Present; hydrolysis does not remove it | Gluten-free | No | Only with a validated test against the claim limit Gluten is a specific protein fraction, not a synonym for wheat protein; wheat also contains albumins and globulins. A wheat peptide can be made from gluten and still be measured by protein, peptide and gluten tests that answer three different questions. ## The allergen does not hydrolyse away Wheat allergy and celiac disease are different conditions. Wheat allergy is an immune response to wheat proteins, and it can be immediate and severe; celiac disease is an autoimmune condition triggered by gluten peptides in genetically predisposed people. The label rules overlap, but one does not replace the other. A product that is low in gluten is not automatically safe for a wheat allergy, and a product that is “wheat-free” is not automatically gluten-free. In the EU, Annex II of Regulation (EU) No 1169/2011 lists cereals containing gluten, wheat among them, and the wheat declaration must appear in the ingredient list with the required emphasis. In the United States, FALCPA lists wheat as a major food allergen, and the label must declare it. The UK applies its own retained food law to the same effect. None of these declarations is optional because the protein has been hydrolysed. Hydrolysis changes the size of the peptides, but it does not reliably remove the epitopes that the immune system recognises. Some IgE-binding sites may be destroyed; others can be exposed, and the effect depends on the enzyme, the degree of hydrolysis and the individual. A wheat peptide is therefore not a hypoallergenic form of wheat, and it should not be described as one. ## Protein, peptide and gluten are three numbers The catalogue sets protein at ≥80.0% by Kjeldahl and peptide at ≥70.0% by HPLC. Those figures describe the protein content and the size fraction; they do not describe the gluten content. A powder can be 80% protein and still carry gluten peptides at a level that matters to a gluten-free claim. The gluten test is the only answer to the gluten question. The Kjeldahl factor matters here too. Wheat is usually calculated at N × 5.70, and an 80.0% result at that factor becomes 87.7% at N × 6.25 on the same nitrogen. The factor and the basis belong on the certificate, because a protein percentage without them cannot be compared with another supplier's number. Wheat protein is also low in lysine and high in glutamic acid and proline, with no hydroxyproline. That profile is useful for identity and for judging a blend: a collagen or gelatin addition brings hydroxyproline, while a soy or pea addition raises lysine. The profile does not measure gluten. ## What the label can say The ingredient name should match the material. “Wheat protein peptides” or “hydrolysed wheat protein” is accurate for the hydrolysate; “gluten” is accurate for the intact protein and not for the peptide. The wheat declaration has to appear in the form the destination requires, and it has to survive into the finished pack. “Plant protein” is true but does not replace the allergen declaration. A gluten-free claim is a separate decision. In the EU, Regulation (EU) No 828/2014 sets “gluten-free” at no more than 20 mg/kg and “very low gluten” at no more than 100 mg/kg, with conditions; in the United States, 21 CFR 101.91 requires less than 20 ppm gluten and the other conditions of the rule. The claim applies to the food as sold, not to the drum, and it needs a validated method and a result. The catalogue does not set a gluten limit, so the claim cannot be assumed from the specification. “Wheat-free” is not available for a wheat-derived material, and no disease-related claim belongs on the pack. The brand's regulatory reviewer confirms the wording for the destination; the certificate does not approve a claim. ## How the gluten question is tested The usual screen is an R5 antibody ELISA. The sandwich format is the Codex-aligned approach for intact gluten, but a hydrolysate can fragment the epitopes it relies on, so a method validated for hydrolysed material, or a competitive format, may be needed. Ask for the extraction procedure, the standard, the limit of quantification and the destination limit. A “not detected” result without a limit of quantification is not evidence of absence. DNA testing can support the wheat source in a lightly hydrolysed material, but hydrolysis degrades DNA, and a negative PCR does not prove the absence of wheat protein. The amino acid profile and the source audit support identity; the gluten ELISA answers the gluten question. Use the test that matches the question, and test the finished product as sold when the claim is on the pack. ## When to choose which Choose wheat gluten when the function is dough structure, elasticity or baking, and the label is a bakery ingredient. Choose wheat protein peptides when the formula needs a water-soluble wheat protein for a capsule, stick pack or blend, and the wheat allergen is acceptable and declared. Choose soy or pea protein when the wheat allergen is the problem, but check their allergens in turn: soy and pea each carry their own declaration and their own functional limits. If the goal is a gluten-free or celiac-safe product, neither ordinary wheat gluten nor an unverified wheat peptide qualifies. That route needs a source and a lot with a validated gluten result against the destination limit. The wheat protein peptides product page carries the catalogue ranges; the grades page covers the hydrolysis and physical choices; the compliance page sets out the allergen file; the soy protein isolate page and the pea protein isolate page show the alternatives; the analytical methods library explains the ELISA and HPLC work; the quality page describes the release file. ### 03 Wheat protein peptides: moisture, heat and shelf life URL: https://nutrition.rainwoodbio.com/products/protein-collagen/wheat-protein-peptides/stability/ Reviewed: 2026-11-19 A sealed pack of wheat protein peptides is the format the retest period is based on; once opened, moisture uptake starts and the clock changes. Moisture is the first variable, because the powder is hygroscopic and browning needs only a little water and heat. A solution is a different problem: heat, pH and microbial growth all act at once, so a liquid needs its own validation. In one lineThe dry powder is the durable format; moisture, heat and a reducing sugar are what turn it brown, and water turns the same powder into a microbial and pH problem. ## The powder: moisture, colour and taste The release limit for moisture is ≤7.0%. In storage, the more useful measure is water activity, and it climbs as the pouch takes up water. Caking, loss of flow and mould risk follow. The foil is only a barrier while the seam is intact; a folded-over opening is not a seal. Move the remainder to a smaller opaque container, or finish it within a stated in-use period. Browning is the second signal. Wheat peptides carry free amino groups, and a blend with a reducing sugar can undergo Maillard reactions at ambient temperature when moisture is high. The colour moves from off-white toward tan or brown, and the taste flattens or becomes more savoury. A certificate cannot show this; the retained sample can. Keep the pack closed, cool and off the floor, and let a cold pack reach room temperature before opening so condensation does not form on the powder. A desiccant helps only inside a container that is already sealed. ## The solution: heat, pH and microbes In water the powder gives a clear to slightly turbid solution. Turbidity can come from larger peptides that did not dissolve, from ash near the 5.0% limit, or from pH. Measure at the formula concentration and at the formula pH, not in plain water. Solubility passes through a minimum near the isoelectric region, so a drink formulated close to that pH can haze while a shift either way clears it. Heat drives both browning and microbial risk. A hot fill or pasteurisation is a process step the powder never sees in dry storage; with sugar present it can brown the drink. Protein in water is food for microbes, so the liquid needs a validated hurdle and hold time. A stick pack postpones the water until the consumer mixes it. ## What drives change Storage and matrix factors for wheat protein peptides | Factor | What changes | How to limit it | Moisture | Caking, browning, microbial growth | Sealed foil; dry store; in-use period | Heat | Faster browning and flavour drift | Cool store; lower process temperature | pH | Haze and solubility in liquid | Test at formula pH; adjust if needed | Reducing sugars | Maillard colour in blends and gummies | Pick excipients; keep moisture low | Microbes | Spoilage in a protein solution | Process hurdle; validated hold time | Time | Slow colour and flavour change | Retest period; retained sample The factors reinforce each other. A warm, damp warehouse is worse than either condition alone, and a clear bottle of solution on a sunny bench adds light and oxygen to heat. The practical question is which pack, at which condition, for how long — not whether the peptide is stable in the abstract. ## A stability protocol for the ingredient A stability file for this ingredient has three arms: the sealed pack, the opened pack, and the finished matrix. The sealed arm uses 25 °C/60% relative humidity and 30 °C/65% relative humidity, with 40 °C/75% relative humidity as the stress condition. Add a light-exposure arm if the pack is transparent. At each point, measure protein, peptide content and the HPLC distribution, then moisture, ash, appearance, taste and microbiology. The peptide curve can move through aggregation or further hydrolysis while the powder still looks the same. If a gluten claim is made, test gluten at release and at the end point with a method fit for a hydrolysate. For a stick pack or a beverage, repeat the work in the matrix at the process pH and heat load. Report the individual values; a page of pass statements hides the trend. The opened-pack arm is the one that predicts what happens in a kitchen or a dispensing area. Its moisture curve is steeper than the sealed drum's, and it is the arm that supports an in-use period. ## The finished formula changes the answer A capsule has low water activity, but the shell and the excipients can still pass moisture. Check loss on drying at release and after storage, and look for caking in the fill. A tablet adds granulation water and heat, and the compressed tablet can pick up moisture from the air; the internal moisture target may need to be tighter than the powder specification. A stick pack lives or dies by its seal. A pinhole or a poor crimp lets humid air in, and the powder cakes inside a strip that looked perfect on the outside. In a beverage, pH, heat, clarity and microbial control have to be validated together. In a gummy, the base competes for water and reducing sugars can brown the peptide; colour and taste are the early warnings. An overage is a label and stability decision. It does not repair a pack that lets moisture in, and it should be tested with the shipping pack rather than a laboratory bag. ## How the shelf life is set The retest period belongs to the pack, not to the molecule. A 1 kg foil pouch and a 25 kg fiber drum differ in headspace, opening history and surface-to-volume ratio, so a figure from one does not transfer to the other. We assign the period from the stability file for the pack that will ship. At the end of the period, re-assay the retained sample before extending use. Do not extend by assumption, and do not carry a bulk figure across to a repacked container. The product hub lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the analytical methods library describes the HPLC work; the quality page describes the release workflow. ### 04 Wheat protein peptides: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/protein-collagen/wheat-protein-peptides/moq/ Reviewed: 2026-11-19 Wheat protein peptides ship from a 1 kg foil pouch and a 25 kg fiber drum, with a 1–7 day lead time on the standard pack. The 1 kg minimum exists so a buyer can qualify a lot before committing to bulk. A quotation is only useful when it names the wheat raw material, the protein and peptide methods, the pack, the destination, the documents and the market. In one lineOne kilogram is enough to qualify a lot: it can be assayed, allergen-tested, retained and traced before a 25 kg drum is ordered. ## Why the minimum is 1 kg A 1 kg pack is a sample that carries a lot code. It supports a bench trial, a retained sample and an independent panel for protein, peptide, moisture, ash, microbiology and, if needed, gluten. It also ships as a parcel, so a formulator can start before the production plan is fixed. The pack is a commercial unit, not a scoop from a drum. Below 1 kg, the material is usually repacked from a larger lot. That is not the catalogue pack, and the link to the original lot has to be documented. The 25 kg drum is the production unit; it lowers handling but ties up stock and extends storage. The minimum is about traceability, not about pushing volume. ## Packs and formats The foil pouch is the moisture barrier; the fiber drum relies on its liner. Because the powder is hygroscopic and wheat-derived, the seal and the allergen label are part of the pack. Standard wheat protein peptide packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal and observe the in-use period | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Particle profile and schedule change | Split or repack | On request | Bench trial below 1 kg | New pack identity; record it The catalogue powder is ≥95% through 80 mesh. Granulation changes the particle-size line and the lead time; it is not a packing preference. If a coarser or freer-flowing powder is needed, raise it before the quotation. ## Lead time and dispatch Standard pack: 1–7 days from confirmation. That clock covers picking, documents and dispatch, not freight, customs or the buyer's release. Custom granulation, dilution or a non-standard pack takes longer; the quotation should show that as a separate line. Get a dispatch date. A drum usually moves on a pallet and a pouch as a parcel; the Incoterm decides who books and clears. Documents should not arrive after the lot. ## What a quotation needs A quotation should let two suppliers be compared without a follow-up call. Six details do that: - Raw material and source. Wheat protein peptides, with the starting material named: vital wheat gluten, wheat flour or a concentrate. - Specification. Protein factor and basis, peptide method, moisture, ash, particle size, heavy metals and microbiology. - Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated variant. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, specification, SDS, wheat/gluten allergen statement, GMO and origin declarations, mycotoxin statement and any market-specific paper. - Intended use and market. Supplement, food or another use, the dosage form, and whether a gluten claim is planned. Without the raw material, the gluten statement and the market, the quotation is for an unspecified powder. Commercial terms are on the quotation, not this page. ## The sample is a lot, not a demonstration Use the 1 kg pack as the qualification lot. Run protein with factor and basis, peptide and distribution, moisture, ash and microbiology; add gluten if the label will carry a gluten claim. Retain material from the same pack and match the lot code across sample, COA and quotation. A sample with no lot line is a demonstration. A bench quantity below 1 kg is a repack; document it. Do not assume the bench split and the production drum share a lot. ## Terms to settle before the first order Put the quality terms next to the commercial ones: specification revision, COA per lot, retained sample, retest period and change control. A quality agreement before the first production order is easier than a dispute after it. If a lot fails, use the retained sample and a joint retest, not a photograph. Agree who pays for the referee laboratory and which laboratory both sides accept. The product hub carries the catalogue specification; the COA page lists the release tests; the compliance page covers the market files; the logistics page covers shipping and documents; the analytical methods library explains the HPLC work; the quality page describes the release workflow. ### 05 The regulatory file for wheat protein peptides URL: https://nutrition.rainwoodbio.com/products/protein-collagen/wheat-protein-peptides/compliance/ Reviewed: 2026-11-19 Wheat protein peptides enter the regulatory file as a wheat-derived protein ingredient. The two facts that drive the file are that wheat is a named allergen in the EU, the US and the UK, and that the material is not gluten-free unless a test proves it. The buyer's regulatory team confirms the route for the destination; the supplier supplies the source, process and lot evidence. In one lineWheat protein peptides are a wheat-derived ingredient, not a gluten-free one by default; the file has to show the source, the process, the destination route and the allergen declaration. ## What the file contains The file has three layers. The material layer describes the wheat raw material, the hydrolysis, any deamidation, the drying step and any carrier. The lot layer is the COA, the retained sample and the traceability record. The market layer is the route, the limits, the label and any claim for the destination. Do not regard the peptide as a different species from wheat. The source is wheat, and the allergen declaration follows the source, not the degree of hydrolysis. A change from vital wheat gluten to flour, or from one enzyme to another, is a specification change and should trigger a label review. ## European Union Start with Regulation (EU) 2015/2283. If the material or the process lacks a history of consumption before 15 May 1997, the buyer's team checks whether an authorisation or a traditional-food notification is needed. The rest of the file sits on general food law (EC) No 178/2002, hygiene rules (EC) No 852/2004, labelling under Regulation (EU) No 1169/2011, contaminants under Regulation (EU) 2023/915 as of this review, and claims under Regulation (EC) No 1924/2006. Annex II of Regulation (EU) No 1169/2011 covers cereals containing gluten, including wheat. The wheat name must be emphasised in the ingredient list. A gluten-free or very low gluten claim is a separate rule under Regulation (EU) No 828/2014: no more than 20 mg/kg for “gluten-free” and 100 mg/kg for “very low gluten”, measured on the food as sold. Check the current consolidated text before release. ## United States The US file depends on whether the product is a supplement or a conventional food. A supplement sits under DSHEA and 21 CFR 111; a new dietary ingredient needs a 21 U.S.C. 350b notification unless a basis exists. A food ingredient needs GRAS status or another lawful basis. The buyer names the basis, and the supplier supplies the source and process data behind it. Wheat is a major food allergen under FALCPA, so the label must declare it. A gluten-free claim is governed by 21 CFR 101.91 and requires less than 20 ppm gluten plus the other conditions of the rule. This material is not gluten-free by default, and the catalogue does not set a gluten limit. ## Contaminants and limits Heavy metals and microbiology are release lines; the finished-product dose decides the final limit. The table gives the catalogue values and the evidence the file should carry. Contaminant and microbiology limits to confirm for the finished product | Parameter | Catalogue limit | What the file should show | Lead (Pb) | ≤3 mg/kg | Measured result, method and finished-product calculation | Arsenic (As) | ≤2 mg/kg | Measured result, method and destination limit | Cadmium (Cd) | ≤1 mg/kg | Measured result and any category exception | Mercury (Hg) | ≤0.1 mg/kg | Measured result and method | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Counts, absence statements and method | Moisture and ash | ≤7.0% and ≤5.0% | Measured results and the use level | Mycotoxins | — | Deoxynivalenol result, method and destination limit Wheat brings a mycotoxin question. Fusarium species can produce deoxynivalenol in the grain, and a wheat protein ingredient should carry a DON result, a method and the destination limit. If the COA has no mycotoxin line, the file has a gap. ## Claims and the label No disease-related claim belongs on the pack or in the file. EU claims sit under Regulation (EC) No 1924/2006 and only authorised wording can be used; a US structure/function claim needs substantiation and the notification that goes with it, while a disease claim turns the product into a drug. UK retained law and the GB register apply on their own terms. Protein claims have thresholds that are measured on the food as sold. The name is a claim too. “Wheat protein peptides” needs source and process support; “gluten-free” needs a validated test and the destination condition; “wheat-free” is false for this material. “Plant protein” is true but does not replace the allergen declaration. The brand's regulatory reviewer confirms the wording; the certificate does not approve it. ## Documents in the file - Specification with the version, wheat raw material and hydrolysis process. - COA for the lot, with methods and results. - Technical data sheet and safety data sheet. - Wheat allergen statement and cross-contact controls. - Gluten test result and method where a gluten claim is made. - GMO statement, country of origin and raw-material traceability. - Processing aid, enzyme and carrier statement. - Contaminant, mycotoxin and microbiology results. - Nutritional data and the stability summary for the pack. - Novel-food, NDI or GRAS dossier where the buyer's route needs it. ## Checklist before the first order - The wheat raw material and the hydrolysis process are named in the specification. - The destination route has been confirmed by the buyer's regulatory team. - The wheat allergen statement and the cross-contact controls are on file. - Any gluten claim has a validated result and the destination condition behind it. - The contaminant and mycotoxin results are converted to the finished-product dose. - The label and claim wording have been reviewed for the destination. - The specification, COA and quotation refer to the same version. The product hub carries the catalogue specification; the COA page explains the lot certificate; the identity page covers the analytical evidence; the EU regulatory note gives the framework references; the analytical methods library explains the tests; the quality page describes the release file. ### 06 How we prove a wheat protein peptide lot is what it says URL: https://nutrition.rainwoodbio.com/products/protein-collagen/wheat-protein-peptides/identity/ Reviewed: 2026-11-19 A wheat peptide is not proved by its protein percentage. The file needs the wheat source, a peptide distribution that is consistent with hydrolysis, an amino acid profile that looks like wheat and not like collagen or soy, and an allergen statement that matches the source. A highly hydrolysed powder is a poor DNA sample, so the documentary and compositional layers carry more weight than a single PCR result. In one lineA wheat peptide is identified by the source record, the nitrogen and peptide figures, the amino acid fingerprint and the allergen statement; the protein percentage alone does not name the material. ## The four identity layers Four layers answer four different questions. The source record is documentary. The protein and peptide figures say the powder is a hydrolysate. The amino acid profile says the protein looks like wheat. The allergen statement ties the powder to the source. None of them is sufficient alone. Four layers of wheat protein peptide identity | Layer | Question | Evidence | What it proves | Source | Is the raw material wheat? | Wheat declaration, raw-material records, supplier audit | The source, not the powder | Composition | Is it a protein hydrolysate? | Protein by Kjeldahl, peptide content by HPLC | Protein and peptide content | Size | How far was it hydrolysed? | HPLC peptide distribution | Process consistency | Fingerprint | Does it look like wheat? | Amino acid profile | Consistency, not source proof Wheat gluten has a distinctive amino acid shape: glutamic acid and glutamine dominate, proline is high, lysine is low, and hydroxyproline is absent. Soy and pea are higher in lysine; collagen and gelatin bring hydroxyproline. The profile does not prove wheat, but it makes several substitutions visible. ## The ratios worth calculating Start with peptide divided by protein. At the catalogue floors, 70.0 ÷ 80.0 = 0.875, so about 87.5% of the protein is counted as peptide. A result above 1.0 means the two methods are not on the same basis. A much lower figure points to intact protein, free amino acids or a different integration cut-off. Check nitrogen against protein next. At N × 5.70, an 80.0% protein figure requires about 14.0% nitrogen; at N × 6.25 it requires 12.8%. If the nitrogen result multiplied by the stated factor does not equal the protein figure, either the factor or the basis is wrong. Check ash against protein. Ash up to 5.0% with protein at 80.0% is possible, but ash near the limit with a clean protein figure suggests salt from neutralisation or a mineral carrier. Sodium and chloride are the follow-up tests. None of these ratios is a release limit unless the specification says so. ## What X-ray diffraction can and cannot show A spray-dried peptide is amorphous, so its diffractogram is a broad halo rather than a sharp pattern. XRD will not identify wheat peptides or separate them from soy or pea peptides. A “conforms” statement without a reference pattern and a detection limit is an empty comparison. XRD has a narrow use: it finds crystalline material in an amorphous powder, such as sodium chloride, a crystalline amino acid or a mineral carrier, and it can show a solid-state change after storage or granulation. Use it for that question, not as a routine release identity test for this product. ## What adulteration looks like The economic substitutions are a carrier, a substitute protein, collagen, free amino acids, salt or a non-protein nitrogen source. Colour and taste are weak evidence because the powder naturally varies; the mass balance, the amino acid profile and the source record are stronger. Common wheat protein peptide substitutions and the signals | Adulterant | What it does | Signal | Test | Maltodextrin or carrier | Lowers protein and peptide per gram | Protein and peptide low; ash normal | Mass balance, HPLC, label | Soy or pea protein | Substitute plant nitrogen | Lysine rises; profile shifts | Amino acid analysis, peptide profile | Collagen or gelatin | Raises protein and hydroxyproline | Hydroxyproline present | Hydroxyproline, amino acid profile | Free amino acids or MSG | Small-molecule nitrogen and taste | Free amino acids high; sodium rises | Amino acid analysis, HPLC, sodium | Salt or mineral carrier | Raises ash | Ash high; sodium or chloride | Ash, ICP-OES, chloride | Non-protein nitrogen | Raises Kjeldahl without peptide | Protein high, peptide low | Nitrogen/protein ratio, amino acid profile Hydroxyproline is the collagen flag, not a wheat marker. Sodium is the salt flag, and it can explain ash and taste without any protein substitution. ## Writing identity into the specification A specification that can be checked names the evidence, not just the product: - “Wheat protein peptides; wheat raw material and hydrolysis process named.” - “Protein ≥80.0% by Kjeldahl; factor and basis printed.” - “Peptide content ≥70.0% by HPLC; method and cut-off named.” - “Peptide distribution reported; amino acid profile reported.” - “No carrier unless declared; no collagen or gelatin present.” - “Moisture ≤7.0%; ash ≤5.0%; heavy metals and microbiology as listed.” - “Wheat allergen statement on file; gluten result where claimed.” ## Five questions for the supplier - Which wheat raw material and hydrolysis process produced this lot, and which document supports it? - What nitrogen factor and basis were used for the protein figure? - How is peptide content measured, and what cut-off defines a peptide? - Can you provide the peptide distribution and the full amino acid profile? - If identity is disputed, will you agree to a joint re-test on the retained sample? Those five answers make an identity file; a single assay figure does not. The product hub carries the catalogue specification; the COA page shows where each figure sits; the grades page compares the practical options; the wheat peptides versus gluten page covers the allergen question; the analytical methods library explains the HPLC work; the quality page describes the release file. ### 01 What the COA for refined coconut oil actually contains URL: https://nutrition.rainwoodbio.com/products/fatty-acids/coconut-oil/coa/ Reviewed: 2026-11-19 The certificate for a refined coconut oil lot reports the GC fatty acid profile, with lauric acid at 45.0–52.0% and myristic at 16.0–21.0%, free fatty acid at ≤0.10%, peroxide value at ≤5.0 meq O₂/kg, moisture at ≤0.1%, the heavy-metal panel and microbiology. Each line needs a method, a release limit and a separate column for what the laboratory actually measured. The limits shown are the catalog specification; only the lot certificate speaks for the material in a given bottle or drum. In one lineA coconut oil certificate is only as strong as its profile: lauric and myristic by GC, free fatty acid, peroxide value and moisture, each with a method, a limit and a measured result. ## The certificate as a test report For an oil, the certificate is a short document compared with a crystalline powder, and it is easy to read carelessly. The appearance line tells you the oil is clear when melted and pale yellow; it does not tell you the grade. The identity line is the fatty acid profile, not a single lauric number. The quality lines are free fatty acid, peroxide value and moisture. Everything else is a contaminant or a hygiene check. A useful certificate lets a reviewer audit each result without calling the supplier. The parameter, the method, the release limit and the measured result should sit in four columns, and the lot code should match the label on the pack. Identity, quality and contaminant tests · refined coconut oil | Parameter | Method | Release limit | Appearance | Visual, after melting | Clear to slightly hazy, pale yellow oil | Identification | GC fatty acid profile | Profile conforms to the reference | Lauric acid (C12:0) | GC, area normalisation | 45.0–52.0% | Myristic acid (C14:0) | GC, area normalisation | 16.0–21.0% | Free fatty acid | Titration, expressed as lauric acid | ≤0.10% | Peroxide value | Iodometric titration | ≤5.0 meq O₂/kg | Moisture | Karl Fischer | ≤0.1% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Enumeration and absence tests | Aerobic plate count ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent ## What each number is measured against The fatty acid profile is reported as a proportion of the fatty acids, usually as area normalisation of the methyl esters. Lauric acid at 50% means half of the fatty acid chains in the sample are C12; it does not mean the oil contains 50% free lauric acid. Almost all of the lauric acid is esterified in triglycerides, which is why the free fatty acid figure is a separate test and a much smaller number. Free fatty acid is titrated and expressed as lauric acid, because lauric is the dominant acid in this oil. A result of 0.05% is a percentage of the oil mass, not a share of the profile. Peroxide value is reported in milliequivalents of oxygen per kilogram and measures primary oxidation products; it says nothing about the secondary products that an anisidine value would catch. Moisture is measured by Karl Fischer and is a release gate for hydrolysis as well as for the oil itself. A GC profile should identify the column, the temperature programme, the reference standard and the integration basis. Without the method, the numbers cannot be reproduced in another laboratory. The analytical methods section explains the general approach to chromatography and wet chemistry. ## Release limit versus batch result One column holds the gate the lot had to meet; the next holds what the laboratory actually found. They are different things, and a certificate that fills the result column with the specification range has told the reader nothing about the lot. The result side of the certificate | Parameter | Release limit | Result column | Lauric acid | 45.0–52.0% | A measured percentage with the GC method | Myristic acid | 16.0–21.0% | A measured percentage from the same run | Free fatty acid | ≤0.10% | A measured percentage, expressed as lauric acid | Peroxide value | ≤5.0 meq O₂/kg | A measured value in meq O₂/kg | Moisture | ≤0.1% | A measured percentage by Karl Fischer Two results need a little more care. A peroxide value of 4.8 is inside the limit but close to it, and the oil will keep oxidising in storage; ask how old the lot is and how it has been stored. A free fatty acid result at 0.08% is also inside the limit, but it points to hydrolysis somewhere in the process. A single pass statement hides both trends. ## What moves between batches The fatty acid profile is a natural composition, so lauric and myristic move within the range from crop to crop and from one crushing lot to the next. Refining lowers free fatty acid and removes colour bodies and odour, but it does not change the profile. Peroxide value depends on the age of the copra, the temperature during extraction and the storage of the finished oil. Moisture depends on the drying and on the seal. Colour tells the least. Refined oil is pale yellow and can be slightly hazy when cool; a darker colour can point to a different grade, a process change or an older oil while the profile still passes. Read a colour shift as a question, not a rejection on its own. A trend across lots is more useful than one result near a limit: lauric drifting to the edge of the range, peroxide value climbing, or free fatty acid rising. The certificate's lot code should match the bottle, the drum and the sample kept for reference. ## When to order an outside test An outside test earns its place in four situations: qualifying a new source, sending a first consignment to a regulated market, supporting a grade claim the supplier's certificate cannot back, or resolving a result that is contested. The tests worth requesting for coconut oil are the GC fatty acid profile, free fatty acid, peroxide value, moisture and the heavy-metal panel. Add anisidine value if oxidation is the concern, and 3-MCPD and glycidyl esters if the oil is refined and the destination sets limits for them. Make the laboratory state the detection limit for every screen; “not detected” without that figure describes the method's sensitivity, not the oil. Keep the chain of custody intact as well: the material tested should be the material retained, and the report should carry the lot code. ## What to compare between suppliers Compare six things: the grade and process; the lauric and myristic results; free fatty acid; peroxide value; moisture; and the pack with its lot code. Two certificates that agree on lauric but differ on grade or peroxide value are not describing the same oil. Traceability is the second layer. The certificate should name the manufacturer, the country of origin and the refining step. The catalog limits are listed on the coconut oil product page. The grade question is on the grades page; the identity page covers the tests that separate coconut oil from a blend; the quality page explains the release workflow. ### 02 Refined, virgin or cold-pressed: choosing a coconut oil grade URL: https://nutrition.rainwoodbio.com/products/fatty-acids/coconut-oil/grades/ Reviewed: 2026-11-19 The grade is the first line of the specification. Refined coconut oil is pale and bland, with a tight free fatty acid and peroxide limit; virgin and cold-pressed oils keep more of the coconut aroma and colour and carry different quality markers; a powder on carrier is a format change, not a grade of oil. The catalog form here is refined coconut oil, lauric 45.0–52.0% and free fatty acid ≤0.10%. In one lineThe grade is a specification, not a marketing word: refined, virgin and cold-pressed oils differ in colour, odour, free fatty acid and the tests that release them. ## Why grade comes before specification “Coconut oil” describes a family of products, not one material. The oil can be pressed from fresh kernel or from copra; it can be refined, bleached and deodorised, or left closer to the fruit. Each route gives a different colour, odour, free fatty acid and peroxide value, and every route needs its own specification. A purchase order that names only the oil has not chosen any of them. Refining is the step that makes the oil consistent. It removes free fatty acid, colour bodies and volatile odour, and it gives a bland oil that suits a capsule or a neutral blend. Virgin oil skips that step, so it carries more of the coconut character and more of the variability. Cold-pressed is a process description, not a guarantee of a lower free fatty acid or a better profile. ## The grades side by side Coconut oil grades and the differences that matter | Grade | Process | Appearance and odour | Analytical effect | Typical use | Refined (RBD) | Refined, bleached, deodorised | Pale yellow, bland | Low FFA and PV; consistent colour | Softgels, neutral oil blends | Virgin | Pressed from fresh kernel, no refining | Deeper yellow, coconut aroma | Higher and more variable FFA; colour varies | Food and flavour-led products | Cold-pressed virgin | Pressed without added heat | Yellow, aromatic | Fatty acid profile close to the fruit; FFA varies by lot | Food products where the process is claimed | Powder on carrier | Oil spray-dried on a carrier | Off-white powder | Oil load and carrier enter the spec | Sticks and powder blends The table is a comparison, not a ranking. A refined oil is the right choice when the formula needs a neutral base and a tight oxidation limit. A virgin oil is the right choice when the coconut character is the point. The two are not interchangeable in a softgel or a flavoured powder, even when the lauric figure is the same. ## Melting, colour and handling Coconut oil is solid below about 24 °C and clear when melted. That phase change is reversible and is not a quality defect; a bottle that is cloudy in a cool warehouse and clear at room temperature is behaving normally. The melting behaviour still matters for handling: a drum should be warmed and mixed before sampling so that the sample represents the whole batch, and a softgel fill line needs a controlled temperature. Refined oil is pale yellow and slightly hazy when cool; virgin oil is deeper yellow and can carry fine sediment. Colour is not a grade proof on its own, because refining and storage both move it. The odour is a better guide to the grade: a bland oil has been deodorised, an aromatic one has not. ## Which grade fits which dosage form A softgel takes refined oil because the fill needs a bland, consistent material with a low peroxide value. An oil-based blend can take either grade, but the flavour and the colour of a virgin oil will carry into the finished product. A powder stick needs a powder on carrier, and that is a different specification: the oil load, the carrier and the particle size all have to be declared. The grade also changes the label. “Coconut oil” is accurate for the oil; a powder on carrier is not the same ingredient and must name the carrier. If the formula declares a specific grade, the specification and the purchase order should use the same word. ## The lines the specification needs - “Refined coconut oil, CAS 8001-31-8, from Cocos nucifera.” - “Lauric acid 45.0–52.0% and myristic acid 16.0–21.0% by GC; profile conforms to the reference.” - “Free fatty acid ≤0.10%, expressed as lauric acid.” - “Peroxide value ≤5.0 meq O₂/kg; moisture ≤0.1%.” - “Clear to slightly hazy, pale yellow oil when melted; bland odour.” - “Heavy metals and microbiology at the catalog limits; pack and lot code declared.” For a virgin or cold-pressed grade, the same lines apply with the limits agreed for that grade; do not carry the refined limits across without checking the lot data. For a powder, add the oil load, the carrier and the particle size. ## Where the other grade fails If the product makes a virgin or cold-pressed claim, refined oil is the wrong material however clean its certificate looks. If the product needs a neutral taste and a low peroxide value, a virgin oil adds flavour and variability that the formula did not ask for. If the process is a powder blend, an oil is the wrong format entirely. The product hub carries the refined specification. The comparison with MCT takes the fraction question further; the MCT powder page covers the carrier format; the stability page covers the storage limits; the compliance page covers the label and the documents. ### 02.1 Coconut oil vs MCT: the triglyceride and the fraction URL: https://nutrition.rainwoodbio.com/products/fatty-acids/coconut-oil/grades/coconut-oil-vs-mct/ Reviewed: 2026-11-19 Coconut oil and MCT are related but not interchangeable. Coconut oil is the whole triglyceride, with lauric acid at 45.0–52.0% and myristic at 16.0–21.0%; MCT is a fractionated medium-chain triglyceride, usually C8/C10, and MCT powder is that oil microencapsulated on a carrier at a declared oil load. They can share a source and a lauric story, but they differ in profile, physical state, dose arithmetic and the name on the label. In one lineCoconut oil is the whole triglyceride; MCT is the fraction cut from it, and the powder is that fraction carried on a starch matrix. ## What “MCT” is a fraction of MCT stands for medium-chain triglycerides. The name describes a family, not a single molecule. Commercial MCT oil is typically made by hydrolysing a lauric oil, fractionating the fatty acids and re-esterifying the C8 and C10 cut onto glycerol. The usual source is coconut oil or palm kernel oil, and the two can give the same C8/C10 product because the fraction is defined by chain length, not by the fruit. That is the key distinction. Coconut oil is the whole oil, with its full profile: lauric, myristic, palmitic, stearic, oleic and the rest. MCT is the part of that profile that falls in the C8/C10 window, concentrated and re-esterified. Lauric acid is a 12-carbon chain and is sometimes counted as medium-chain in food writing, but the commercial MCT fraction is usually C8/C10, which is why an MCT oil is not simply coconut oil. ## Coconut oil, MCT oil and MCT powder The whole oil against the fraction and the powder | Property | Coconut oil | MCT oil | MCT powder 50% | Identity | Whole lauric oil; CAS 8001-31-8 | C8/C10 triglycerides; CAS 73398-61-5 | MCT oil on a starch carrier | Main fatty acids | Lauric 45.0–52.0%; myristic 16.0–21.0% | C8 55.0–65.0%; C10 35.0–45.0% | The same C8/C10 profile, expressed on the oil | Physical state | Solid below about 24 °C | Liquid at room temperature | Free-flowing powder | Oil load | 100% oil | 100% oil | ≥50.0% oil | Carrier | None | None | Modified starch, declared | Label name | Coconut oil | Medium-chain triglycerides | MCT powder with the carrier named The table shows why the three are separate purchases. A softgel can take coconut oil or MCT oil, but the fill weight and the label change. A powder stick needs the powder, and the powder is only half oil, so the dose arithmetic changes again. ## Solid, liquid and dispersible Coconut oil solidifies below about 24 °C and melts back without a change in composition. That is normal, but it matters for handling: a drum needs warming and mixing before dispensing, and a softgel line needs a controlled fill temperature. The solid state is not a defect and not a sign of hydrogenation. MCT oil stays liquid at room temperature and can cloud in a cold room; it is easier to pump and to fill into a softgel, but it is still an oil and it still oxidises. MCT powder is dispersible, not soluble: the oil sits inside a starch matrix and the powder mixes into water without forming an oil layer. The matrix adds carbohydrate and bulk, and the powder's moisture limit is much higher than the oil's because the carrier holds water. The physical form decides the dosage form. An oil suits a softgel or an oil blend; a powder suits a stick pack, a shaker or a drink mix. A formulator who swaps one for the other has changed the fill weight, the mouthfeel and the label. ## What the label has to name “Coconut oil” and “medium-chain triglycerides” are different ingredient names. A product made with MCT oil does not declare coconut oil as the ingredient, and a product made with coconut oil does not declare MCT oil, even though the source may be the same fruit. MCT powder adds a carrier, and the carrier belongs in the ingredient list. The source statement follows the destination rules. Coconut is the source of both the oil and, often, the MCT; the buyer's regulatory team confirms how the source and the carrier are declared on the finished label. The grade claim, if any, belongs to the oil, not to the fraction. ## The dose arithmetic A 1 g serving of MCT powder at 50% oil load delivers about 0.5 g of MCT oil; the rest is carrier. A 1 g serving of coconut oil delivers 1 g of oil. That difference is easy to miss when a formula is copied from one ingredient to the other. The fatty acid arithmetic is separate. Coconut oil delivers lauric and myristic as part of its whole profile; MCT oil delivers mostly C8 and C10. A label that declares “MCT” is not declaring lauric acid, and a label that declares lauric acid is not declaring C8/C10. Specification, dose and label need one basis, not three. ## When to choose which Choose coconut oil for a softgel, an oil blend or a product where the whole-oil profile and the coconut identity are the point. Choose MCT oil for a liquid fill where a C8/C10 profile and a low melting point are wanted. Choose MCT powder for a stick pack, a powder blend or a beverage where an oil would separate. The coconut oil hub sets out the whole-oil specification; the MCT powder page covers the powder specification; the grades page widens the comparison to the other grades; the COA page shows where the profile is reported; the methods section explains the GC test. ### 03 Coconut oil stability: oxidation, hydrolysis and the pack URL: https://nutrition.rainwoodbio.com/products/fatty-acids/coconut-oil/stability/ Reviewed: 2026-11-19 Refined coconut oil is a highly saturated oil, so it oxidises more slowly than a polyunsaturated seed oil. It is not immune: peroxide value rises with oxygen and heat, free fatty acid rises with moisture and hydrolysis, and repeated melting adds a thermal load. The sealed pack, the headspace and the storage temperature decide how long the specification holds; the retest period is assigned from data for that pack. In one lineCoconut oil is slow to oxidise, not immune: peroxide value, free fatty acid and moisture are the numbers that move, and the pack decides how fast. ## The sealed pack: moisture and headspace The catalog sets moisture at ≤0.1%. That figure applies at release; it is not an allowance for water picked up in storage. Water in the oil, or vapour that reaches it, drives hydrolysis and raises free fatty acid. The 1 kg HDPE bottle and the 25 kg HDPE drum are good moisture barriers, but the seal and the headspace decide what happens after filling. A drum left open in a humid room is no longer the pack that was tested. Oxygen is the other half of the problem. The oil oxidises at the surface and in the headspace, and peroxide value is the first number to move. A full, well-sealed pack has little headspace; a part-used drum has a large one. Nitrogen flushing can reduce the oxygen load, but it has to be specified and verified, not assumed. Light accelerates oxidation, and a transparent bottle left on a shelf is an exposure even for a saturated oil. Keep the pack closed, in the dark, and off a warm floor. ## Melted oil, blends and emulsions Coconut oil is not normally supplied as an aqueous solution, but it is handled as a melt and as an oil phase. Melting above about 24 °C is part of normal use; holding it hot for a long time is not. Each melt-solidify cycle adds a heat load and exposes more surface to air, and a kettle kept warm all day is a different storage condition from a sealed bottle. In an oil blend, the other oils decide the oxidation rate. A small share of a polyunsaturated oil can shorten the induction period of the blend even when the coconut oil is stable on its own. In an emulsion, the oil phase is dispersed and the interfacial area is large; the process, the pH and the antioxidant system matter more than the bulk oil result. The MCT powder is a different case: the oil is carried in a starch matrix and the powder's moisture and peroxide limits apply. The MCT powder page covers that format. ## What moves the oil in storage What moves refined coconut oil in storage | Factor | Effect | Control | Oxygen | Raises peroxide value; rancid odour | Sealed pack; low headspace | Light | Accelerates oxidation | Opaque or dark store | Heat | Accelerates oxidation and hydrolysis | Controlled store; short melt holds | Moisture | Raises free fatty acid through hydrolysis | Dry store; closed pack | Metal ions | Catalyse oxidation | Avoid iron and copper contact | Repeated melting | Adds heat and air exposure | Melt once; avoid long hot holds The factors reinforce one another: a hot, brightly lit, damp store is worse than any single one of them, and a part-used drum in that store is the worst case. The useful question is not whether coconut oil is stable, but for which pack, storage condition and time frame. ## A stability protocol for the oil A protocol is only useful when it names the container, the storage condition, the sampling points and the tests. Warehouse behaviour is covered by a long-term arm at 25 °C and 60% RH, with an intermediate arm at 30 °C and 65% RH. Accelerated storage at 40 °C and 75% RH puts pressure on the pack. Add a light-exposure arm, because a dark incubator cannot show a photochemical failure. Test peroxide value, free fatty acid, moisture and appearance at each point, and repeat the fatty acid profile at the start and the end to confirm the identity has not moved. For a blend or a softgel, repeat the study in the matrix, because the shell and the other oils change the rate. The report should give individual results, not a single pass statement, and should tie the data to a pack and a lot family. ## What the finished formula does A softgel has a gelatin or plant shell that limits oxygen, but the fill is still an oil and the shell can transfer moisture. Measure peroxide value and free fatty acid at release and again after storage; inspect the fill as well. An oil blend depends on the weakest oil in it, not only on the coconut share. A powder on carrier depends on the matrix and the seal. An antioxidant can slow oxidation, but it cannot compensate for a pack that admits air, and it does not restore an oil that has already oxidised. The formulator decides whether one is needed; the specification records what was added. ## Setting the retest period No single shelf life is published for coconut oil, because the pack and its storage conditions determine it. The retest period on the specification is supported by stability data for that exact pack. A figure with no pack, no storage condition and no test panel is an assertion, not a shelf life. At the end of the retest period, the retained sample has to be re-tested before any extension. Do not assume an extension, and do not apply a bulk result to a container that has been repacked. Standard packs are listed on the coconut oil hub; the COA page covers the tests performed at release; the MOQ page gives pack sizes and lead time; the quality page explains how a lot is released. ### 04 Coconut oil: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/fatty-acids/coconut-oil/moq/ Reviewed: 2026-11-19 The MOQ for refined coconut oil is 1 kg, supplied in a 1 kg HDPE bottle; the production pack is a 25 kg HDPE drum. The standard pack ships within 1–7 days of confirmation. A firm quotation needs six details: the grade and specification, the destination and Incoterm, quantity and pack, documents, intended use, and the label or grade claim the buyer intends to make. In one lineThe minimum is one bottle, not one kilogram of loose oil: a 1 kg HDPE pack carries a lot code, a COA and a retained sample. ## Why the minimum is one bottle A 1 kg bottle is enough for a bench trial, a retained sample and a separate identity check, and it stays a single traceable unit: the bottle, the lot code and the COA describe the same material. Splitting a smaller quantity from a drum adds a repack step and breaks that link without changing the oil. The 25 kg drum serves production. It cuts handling per kilogram, but it ties up inventory and extends the storage period, and it must be warmed and mixed before dispensing because the oil sets below about 24 °C. The minimum is set by the pack, not by a volume target. ## Packs and formats Standard refined coconut oil packs | Pack | Net weight | Where it fits | Handling | HDPE bottle | 1 kg | Bench trial; qualification | Moisture barrier; keep sealed and dark | HDPE drum | 25 kg | Production | Warm and mix before dispensing; lot code on drum | Powder on carrier | On request | Sticks and powder blends | Oil load and carrier are a different specification The catalog form is the oil. A powder on carrier is a different material with its own oil load, carrier and particle size, and it should be quoted as such. Tell us before the quotation if the finished product will be a powder; it changes the specification and may change the lead time. ## Dispatch and transit The standard pack ships in 1–7 days once the order is confirmed. That window includes picking, paperwork and dispatch; freight transit, customs and the customer's release are additional. A non-standard pack or a powder on carrier needs extra time, and the quotation should show it as a separate line. Ask for a dispatch date as well as a lead time. Freight differs by pack: drums ship on pallets, bottles as parcels. The Incoterm settles who arranges transport and who handles import clearance, and the documents need to move with the lot, not trail behind it. ## What a quotation needs A quotation can be compared only when it covers six points: - What is being bought. Refined coconut oil, CAS 8001-31-8, with the grade spelled out. - The analytical gate. Lauric and myristic profile, free fatty acid, peroxide value, moisture, heavy metals and microbiology. - Volume and container. 1 kg bottle, 25 kg drum, or a powder on carrier. - Where it is going. Country and delivery point, plus the trade term that governs the shipment. - The document pack. COA, specification, SDS, and any statement the importer's market requires. - The end use. A supplement, a food or another application, and the market for the finished product. A quotation without the grade and the market is incomplete. An oil that fits one market may be outside the file for another, so the paperwork belongs in the offer. Commercial terms are stated on the quotation, not on this page. ## A sample carries the lot code A 1 kg bottle doubles as the qualification sample. Check the profile, free fatty acid, peroxide value and moisture before scaling up, and retain material from the same bottle. Sample, COA and quotation should share one lot code; if they do not, the sample is only a demonstration. A smaller bench quantity can be discussed before the order, but understand what it is: a repack from a bulk lot, with its own traceability and not the catalog pack. Keep a bench sample and a production drum as separate lots unless the codes prove otherwise. ## What to settle before ordering The quotation carries the commercial details, the trade term, the container, the lead time and the document list. The quality terms sit alongside them: which specification revision applies, the certificate for each lot, the retest period, the retained sample and the change-control route. Settle them before production begins; a quality agreement written after a dispute is worth much less. The quotation and the quality terms govern returns and replacements. If a lot misses the agreed specification, a joint re-test of the retained sample settles the question; a photograph of the oil does not. Agree in advance who pays for the referee laboratory and which laboratory both sides accept. The coconut oil hub lists the catalog; the COA page covers the tests performed at release; the compliance page holds the market files; the methods section explains the GC profile; the quality page describes how a lot is released. ### 05 The regulatory file for refined coconut oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/coconut-oil/compliance/ Reviewed: 2026-11-19 Refined coconut oil is bought against a specification and a destination, and the regulatory file connects the two. It carries the grade, the fatty acid profile, the contaminant results, the allergen and origin statements, and the label review for the market where the finished product will be sold. The buyer's regulatory team confirms the route; this page sets out the paperwork and the checks a buyer should expect. In one lineA coconut oil file has to connect three things: the grade on the specification, the results on the lot certificate and the label rules of the destination market. ## What the file contains Four questions drive the file. First, what exactly is being bought: which grade, which specification version and which CAS number? Second, which lot is on the certificate, and what did the laboratory measure on it? Third, what limits and label rules apply in the destination market and at the intended dose? Fourth, what happens to the approval when the crush, the refiner or the packaging line changes? The certificate, the technical data sheet and the safety data sheet each answer one part, and none of them settles the route by itself. The allergen statement, the GMO statement, the origin record, the refining record and any customer-specific declaration belong in the same file. If a statement cannot be supplied for a lot, raise that before the purchase order rather than at the port. Version numbers and dates on each document save more time than a pile of undated files. ## European Union For the EU, the review starts with the grade, then the contaminant data, then the label. Regulation (EC) No 178/2002 sets the general food-law frame, Regulation (EU) No 1169/2011 governs the information given to the consumer, and Regulation (EU) 2023/915 carries the contaminant limits current at this review. Refined oils also bring the process contaminants into scope: 3-MCPD, its fatty acid esters and glycidyl fatty acid esters are checked against the category and level in the current text. The label is a separate review from the specification. Ingredient name, net quantity, nutrition declaration and any grade claim are tested against the EU rules that apply to the finished product. The buyer's regulatory team decides how the oil will be positioned in the destination country and checks that the file describes the material actually placed on the market. Great Britain and Northern Ireland do not share one file. GB rules apply in Great Britain, while Northern Ireland is handled under the EU framework; the buyer decides which file the shipment needs. ## United States For the United States, the file turns on the ingredient and what it will be used for. The supplier should identify the basis it is relying on and supply the document behind it, and the buyer checks that the same basis reaches the finished product. The Federal Food, Drug, and Cosmetic Act, the labelling provisions in 21 CFR 101 and, where the product is a dietary supplement, the cGMP requirements in 21 CFR 111 are the references normally checked; a conventional food use also brings 21 CFR 117 into the review. Claims and labels are reviewed on their own track. A “virgin” or “cold-pressed” statement needs a process record that supports it, not just the wording on the purchase order. ## Contaminants and limits The limits below are measured on the drum, but the compliance question is asked at the finished-product dose. Convert each lot result to the daily intake, then compare it with the destination rule. The catalog limits in the middle column are the starting point, not the final answer. Limits to carry into the finished-product review | Parameter | Catalog limit | Evidence the file needs | Lead (Pb) | ≤3 mg/kg | Result, method and dose calculation | Arsenic (As) | ≤2 mg/kg | Lot result and the agreed limit | Cadmium (Cd) | ≤1 mg/kg | Result; note any category exception | Mercury (Hg) | ≤0.1 mg/kg | Result plus method | 3-MCPD and glycidyl esters | — | Destination limit, current text, and a lot statement | PAH4 | — | Destination limit and a drying-process statement | Free fatty acid and peroxide value | ≤0.10% and ≤5.0 meq O₂/kg | Lot results and the storage history Two of these lines matter particularly for coconut oil. Refined oil can carry 3-MCPD and glycidyl esters from the deodorisation step, and copra drying can be a source of polycyclic aromatic hydrocarbons. A heavy-metal panel catches neither, so both should be named in the file when the destination sets a limit. ## Label and claims The ingredient name on the label has to match what the destination requires: “coconut oil” for the oil, plus the grade where a grade claim is made. If the material is a powder on carrier, the carrier is part of the ingredient declaration. Allergen labelling follows the destination list and the source; the buyer's regulatory team decides whether coconut must be named on the finished label. No disease-related claim is made here. A structure or function claim is the brand's responsibility and is reviewed against the market rules; it neither changes the specification nor validates the certificate, and no certificate can approve a claim. ## Documents in the file - Version-controlled specification, with grade, profile and limits. - Lot certificate of analysis, methods and results included. - Technical data sheet; safety data sheet. - Allergen statement; GMO statement; country of origin. - Refining record covering extraction and deodorisation. - Heavy-metal, 3-MCPD, glycidyl ester and, where required, PAH statements. - Packaging declaration and lot-code traceability. ## Checklist before the first order - The grade, specification version and CAS number are fixed in writing. - COA, TDS, SDS, allergen, GMO and origin records are present and dated. - The label and claim review is complete for the destination. - Each contaminant result has been recalculated at the finished-product dose. - The extraction and deodorisation route is documented, with the process-contaminant statements. - Quotation, specification and certificate all cite the same version. The coconut oil hub holds the current catalog data. The identity page covers the tests behind identity, the COA page explains the certificate, the quality page sets out the release process, and the methods section explains the analytical methods. ### 06 How to prove a coconut oil lot is coconut oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/coconut-oil/identity/ Reviewed: 2026-11-19 A coconut oil lot is identified by its GC fatty acid profile, supported by the physical constants and the quality markers. The catalog profile is lauric acid 45.0–52.0% and myristic acid 16.0–21.0%, with free fatty acid ≤0.10%, peroxide value ≤5.0 meq O₂/kg and moisture ≤0.1%. A single lauric figure can be matched by a blend; the full profile, the C12:C14 ratio, the slip point and the oxidation markers together are harder to imitate. In one lineA coconut oil identity rests on the whole profile: lauric and myristic together, the C12:C14 ratio, the slip point and the oxidation markers have to agree. ## The four identity layers Naming the oil is not the same as proving it. The four layers below answer different questions, and a supplier who supplies only the first has sent paperwork rather than evidence. Four layers of coconut oil identity | Level | What it asks | Measurement | What it establishes | Document | Is the grade and source named? | Name, CAS 8001-31-8, origin | Paperwork only | Profile | Is the fatty acid pattern coconut oil? | GC fatty acid profile | The oil family | Physical | Does the solid behave like coconut oil? | Slip point, iodine value | The degree of saturation | Quality | Is it fresh and undiluted? | FFA, PV, moisture | Condition and consistency ## The profile and the C12:C14 ratio Coconut oil is not defined by one number. The profile normally runs lauric 45–52%, myristic 16–21%, palmitic 8–11%, stearic 2–4%, oleic 5–8% and linoleic 1–3%, with caprylic and capric acids in the middle single digits. The exact figures move with the crop and the process; the pattern is the identity. The ratio of lauric to myristic acid is a useful summary, and a typical coconut oil sits near 2.7. A ratio inside the 2.5–3.0 band is consistent with coconut oil; a ratio well outside it points to another lauric oil, a fraction or a blend. The ratio is a screen, not a proof, because palm kernel oil has a similar lauric and myristic range, and a blend can be built to land inside the window. That is why the full profile matters. Palm kernel oil tends to carry a different balance of caprylic, capric and oleic acids; an MCT fraction raises caprylic and capric and lowers lauric; a hydrogenated fat changes the saturation pattern. The chromatogram, not the lauric percentage alone, separates them. The methods section explains the GC approach. ## X-ray diffraction and the solid state X-ray diffraction looks at the solid state instead: how does the solidified fat pack? Fats crystallise in polymorphic forms, and the diffraction pattern reflects the crystal lattice rather than the fatty acid composition. For coconut oil, this is not part of routine release testing; it is a solid-state check for a disputed lot, a hydrogenated blend or a fraction with a different melting behaviour. A pattern that matches a reference at the same temperature supports the claim that the solid is the expected fat. A pattern with extra reflections can point to a high-melting fraction or a hydrogenated component. Ask for the reference diffractogram, the temperature of the run and the limit of detection; without them, “matches the reference” is a conclusion with no working shown. XRD is strongest alongside the profile and the physical constants, not instead of them. ## What adulteration looks like Common coconut oil substitutions and the signals | Substitute | Effect | Warning sign | Check | Palm kernel oil | Similar lauric profile, different C8/C10 and oleic balance | Profile shift; ratio near the edge | Full GC profile | Hydrogenated fat | Higher melting point; harder solid | Slip point high; XRD pattern differs | Slip point, XRD | Other vegetable oil | More linoleic and oleic; lower lauric | Lauric below range; linoleic high | GC profile | MCT fraction | More C8/C10; less C12 | Caprylic and capric high; lauric low | GC profile | Water | Hydrolysis; haze | Moisture or FFA high | Karl Fischer, titration | Old or oxidised oil | Off odour; poor shelf life | PV high; anisidine high | PV, anisidine value Neither colour nor odour carries much weight. Refined oil is bland by design, and a darker or more aromatic oil can be a grade difference rather than an adulteration. What carries weight is the full profile, the slip point and the oxidation numbers. ## The identity clauses the specification needs - “Refined coconut oil, CAS 8001-31-8, from Cocos nucifera, country of origin declared.” - “Lauric acid 45.0–52.0% and myristic acid 16.0–21.0% by GC; full profile conforms to the reference.” - “Free fatty acid ≤0.10%, expressed as lauric acid; peroxide value ≤5.0 meq O₂/kg.” - “Moisture ≤0.1%; slip point and iodine value reported for the lot.” - “No added MCT, hydrogenated fat or other vegetable oil.” - “Grade, pack and lot code declared on the certificate.” ## Five questions for the supplier - Can you provide the full GC profile, not only the lauric percentage? - What are the lauric and myristic results for this lot, and what is their ratio? - What is the slip point or melting range, and the iodine value? - What are the free fatty acid, peroxide value and moisture results for this lot? - If a result is contested, will you re-test the retained sample jointly? Taken together, those five answers form an identity file; one lauric percentage on its own does not. The coconut oil hub holds the catalog data; the COA page records where each result appears; the grades page compares the grades; the comparison with MCT covers the fraction; the quality page explains how a lot is released. ### 01 What the COA for lecithin actually reports URL: https://nutrition.rainwoodbio.com/products/fatty-acids/lecithin/coa/ Reviewed: 2026-11-19 A lecithin certificate has to describe a mixture, so it reports composition rather than a single potency. Acetone-insoluble matter and the phosphorus-based phospholipid figure size the phosphatide fraction; the class profile describes how that fraction is built; moisture, acid value and peroxide value record the condition of the lot. The soy source is declared separately as an allergen. In one lineThe phospholipid figure is only as good as its basis: acetone-insoluble matter, the phosphorus calculation and the class profile answer three different questions. ## Reading the certificate in four blocks Read the certificate in four blocks: what the material is, how much phosphatide it contains, what condition it is in, and what has been screened out. The identity block should name the phospholipid profile method; a bare “conforms” does not say which classes were seen. The composition block carries two numbers that are often confused, and the condition block carries the two that move first in storage. Release lines on a soy lecithin certificate | Test | Method | Limit | Appearance | Visual | Yellow to light brown powder or viscous fluid | Identification | Phospholipid profile by TLC or HPLC | Profile conforms to the reference | Acetone-insoluble matter | Gravimetric, acetone extraction | ≥60.0% | Phospholipids | Phosphorus method, as stated | ≥60.0% | Moisture | Loss on drying or Karl Fischer, as stated | ≤1.0% | Acid value | Titration, mg KOH/g | ≤30 | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent Two lines are missing from many lecithin certificates: peroxide value and residual solvent. Neither appears in this catalog specification, but both belong in a buyer's file when the material carries oil or comes from solvent extraction. ## Acetone-insoluble matter, phosphorus and the class profile Acetone is the reagent that separates the phosphatides from the oil. It dissolves triglycerides, free fatty acids and sterols, and the phosphatides stay behind as a residue. Weighing that residue gives acetone-insoluble matter. The number is useful, but it is a residue weight, not a class-specific assay: sugars, salts or protein that also resist acetone are counted with the phospholipids. In the common phosphorus-based method, the phospholipid figure is a calculation, not a second weighing. Phosphorus is measured, then multiplied by a factor derived from the average molecular weight of the phosphatides. Because the classes differ in molecular weight, the factor is a convention, and the certificate should print it. A reading of 2.4% phosphorus becomes 60.0% at a factor of 25 and 63.1% at 26.3. Neither is wrong; they answer different conventions. Moisture is a third convention. Karl Fischer titrates water; drying at 105 °C drives off water and any other volatile matter. The catalog's ≤1.0% and the E322 loss-on-drying limit of ≤2.0% are therefore not the same gate, even though both are often printed as “moisture”. ## Limit, result and the gap between them Every acceptance line needs a measured value beside it, not a restatement of the limit. A column that repeats “≥60.0%” is a blank with a number in it. Per-element metal results and a count-plus-absence microbiology statement are the minimum evidence for those lines. What the result column should contain | Parameter | Limit | What a result should show | Acetone-insoluble matter | ≥60.0% | A measured percentage and the drying condition | Phospholipids | ≥60.0% | A measured percentage, the phosphorus figure and the factor | Moisture | ≤1.0% | A measured percentage and the method | Acid value | ≤30 mg KOH/g | A measured figure | Heavy metals | Per element | A figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot Judge the lot from the numbers, not from the word “pass”. If the certificate gives a single heavy-metal total, the reader cannot see which element drove it. ## Batch-to-batch variation Four things move between lecithin lots: the oil left in the product, the phospholipid class pattern, the moisture, and the acid value. The first two start at the crush and the degumming step; the last two are influenced by drying and by storage. Colour follows all four and is the least diagnostic of them. Watch the direction across shipments. An acid value that has climbed toward 30, a moisture that sits at 0.9%, or an acetone-insoluble figure that has fallen toward 60 is more informative than any single result. Check that the lot code on the paper is the one on the pack and on the retained sample. ## When independent testing is worth it Outside testing is worth commissioning at four moments: a new source, a new market, a claim the paperwork cannot support, or an acid value or peroxide value in dispute. The panel should be built around the question, not copied from the certificate. For a source question, ask for acetone-insoluble matter, phosphorus, the phospholipid class profile, the fatty acid profile and the sterol profile. For a condition question, ask for acid value, peroxide value and moisture. For a market question, add the heavy-metal panel, microbiology and the residual-solvent statement. A GMO statement for soy is usually a chain-of-custody document, not a PCR result on the lecithin: a refined phospholipid may hold little DNA. Require a detection limit with any “not detected” line. ## Comparing two lecithin certificates Compare certificates on six lines: source, acetone-insoluble figure, phospholipid basis, class profile, acid and peroxide values, and contaminants. Then compare the packs and the lot codes. Two suppliers can both say “60% lecithin” and still be selling different materials if one figure is AI and the other is a phosphorus calculation. Ask who manufactured the lot, which soy origin it came from, and how it was degummed and dried. For the catalog specification, see the soy lecithin product page. The identity page explains the source tests; the compliance page lists the additive limits; the methods library describes the assays; the quality page sets out the release sequence. ### 02 Fluid, deoiled or modified: choosing a lecithin grade URL: https://nutrition.rainwoodbio.com/products/fatty-acids/lecithin/grades/ Reviewed: 2026-11-19 Lecithin is a family of products, and the grade is fixed by four choices: how much phospholipid the material carries, whether it is fluid or solid, which plant it came from, and whether it has been modified. The catalog grade is soy lecithin at ≥60% phospholipids and ≥60% acetone-insoluble matter, available as powder or fluid. Each choice changes the mass on the label and the allergen declaration. In one lineThe grade is the acetone-insoluble figure plus the form and the source; changing any one of them changes the dose weight and the allergen statement. ## Why the range exists Three commercial forces create the range. The first is oil: fluid lecithin retains much of the soybean oil, while a deoiled powder is mostly phosphatide. The second is handling: a capsule line wants a powder that flows, and an oil blend can take a viscous fluid. The third is function: hydrolysis or fractionation changes how the material behaves in water. Source cuts across all three. Soy lecithin is the catalog material; sunflower lecithin is a different product with a different fatty acid pattern and a different allergen statement. The two are not interchangeable under a “lecithin” label. The word “grade” should therefore be followed by at least two qualifiers — for example, “soy, 60%, powder” — before a supplier can quote it. ## Fluid, deoiled, carrier-supported and modified Lecithin forms in commercial use | Form | Acetone-insoluble matter | Physical state | Where it is used | What follows the choice | Fluid soy lecithin | About 60–65% | Viscous, oil present | Emulsifier, oil blends | More grams per gram of phospholipid | Deoiled soy powder | ≥95% | Free-flowing powder | Capsules, dry blends | Less oil; lower mass per phospholipid dose | Carrier-supported powder | Carrier plus 50–70% lecithin; AI lower | Free-flowing powder | Sticks, blends | Carrier is declared; AI is read on the powder | Hydrolysed lecithin | ≥56.0% | More hydrophilic fluid or powder | Instant powders, emulsions | Higher acid value; separate additive limits | PC-enriched fraction | Not the basis of the grade | Powder or waxy solid | Declared PC dose | Different name, assay and label The catalog sits in the 60% band and can be quoted as a fluid or a powder. A powder can be deoiled, in which case the AI figure runs far above 60%, or carrier-supported, in which case the carrier is part of the specification and the AI is read on the powder. The certificate and the carrier declaration decide which one is in the pack. Hydrolysed lecithin is a fourth form. The enzyme treatment raises the acid value and improves water dispersibility, and the EU additive specification gives it its own AI minimum of 56.0% and an acid-value limit of 45. It is not the same material as hydrolysed protein, despite the shared word. A PC-enriched product is a fifth form and a different purchase. The lecithin versus phosphatidylcholine comparison sets out the difference. ## Handling the fluid and the powder A fluid grade is dark and sticky, pours slowly when cold, and is usually warmed to move it. Warmth has a downside: it darkens the colour and accelerates hydrolysis, so the heater should be set and recorded rather than left on. A powder grade is hygroscopic, dusts, and cakes when the store is humid; it disperses in water but does not dissolve. Flow is not a cosmetic property. A deoiled powder and a carrier-supported powder can pass the same mesh and still have different bulk densities, and a hopper that feeds one will bridge on the other. Put bulk density and flow on the specification for a powder, and say whether the figure is measured on the powder or on the lecithin. Both forms dislike heat. A powder that has been stored warm can still flow and still carry a higher acid value than the certificate reported, because hydrolysis leaves no visible mark. ## Dose arithmetic for each grade Start with the label's declared ingredient. A lecithin claim is a claim on the mixture; a phospholipid claim is a claim on the phosphatide fraction; a PC claim is a claim on one class. Each needs a different divisor. Suppose the label declares 300 mg phospholipids. At a 60% phospholipid figure the powder weight is 500 mg; at 70% it is about 429 mg; at 95% deoiled powder it is about 316 mg. Suppose it declares 100 mg PC: at 20% PC the lecithin weight is 500 mg, and at 90% PC it is about 111 mg. These are illustrations; the certificate figure is the divisor. Carriers change the divisor again. A carrier-supported powder's lecithin percentage and its AI percentage are different numbers, and the label has to say which one the dose is built on. ## Writing the grade specification Write five blocks into the grade specification: identity (soy lecithin, CAS 8002-43-5, additive entry), composition (AI, phospholipids and the factor, class profile), condition (moisture, acid value, peroxide value), contaminants (metals, microbiology, residual solvent), and labelling (allergen, GMO, carrier). Add the form and the particle size for a powder. Name the method and the basis next to each number, and do not carry a fluid limit across to a powder. The COA page shows the report; the identity page shows the profile checks. ## When another grade is the wrong purchase A PC claim above what lecithin carries needs the PC fraction, not more lecithin. A soy-free claim needs a different plant, not a lower percentage. A clear solution needs a different ingredient, because lecithin disperses and clouds. A label that says lecithin cannot be filled with a PC isolate without a new label. The product page lists the catalog grade; the MOQ page lists the packs; the stability page covers storage for each form. ### 02.1 Lecithin vs phosphatidylcholine: the mixture and the isolate URL: https://nutrition.rainwoodbio.com/products/fatty-acids/lecithin/grades/lecithin-vs-phosphatidylcholine/ Reviewed: 2026-11-19 Lecithin and phosphatidylcholine are related the way a mixed fruit juice and a single-fruit concentrate are related: one is the whole mixture, the other is a fraction of it. A PC grade is standardised on one phospholipid class, while lecithin is standardised on the total phosphatide fraction. The label, the dose and the specification follow that difference. In one lineLecithin is the mixture and phosphatidylcholine is one fraction of it: the dose weight, the label name and the specification follow the name on the certificate. ## What lecithin is Lecithin is a mixture by definition. It contains phosphatidylcholine, phosphatidylethanolamine, phosphatidylinositol and phosphatidic acid, plus oil, sterols and glycolipids. The US GRAS regulation describes it as a naturally occurring mixture of phosphatides, and the EU additive entry covers lecithins and their fractions together. The mixture is the commercial product, not an intermediate on the way to one class. A 60% lecithin has about 60% phosphatide and about 40% other material. PC is one component of that 60%, so a “60% lecithin” is not a “60% PC” ingredient. The gap between those two readings is the most common source of a wrong capsule weight. ## What a phosphatidylcholine grade is To make a PC grade, the lecithin is first deoiled, then extracted with ethanol, which dissolves PC more readily than PE or PI. The soluble fraction is concentrated and, if a higher figure is needed, fractionated again or polished chromatographically. The output is sold on its PC content, with concentrates at 70% or 90%. PC is measured by a class-specific method, typically HPLC with an evaporative light-scattering or charged-aerosol detector, or TLC with densitometry. Neither acetone-insoluble matter nor a phosphorus calculation separates the classes. A PC certificate that reports only AI has not measured the grade's defining figure. Hydrogenated PC and lyso-PC are separate products. Hydrogenation saturates the fatty acids and changes the oxidation behaviour; enzymatic hydrolysis removes one fatty acid and increases water dispersibility. ## Lecithin and a PC grade compared Soy lecithin and a phosphatidylcholine grade | Property | Lecithin | Phosphatidylcholine grade | What it is | The phospholipid mixture plus oil | A fraction standardised on PC | Specification basis | AI, phospholipids, class profile | PC by HPLC or TLC | PC content | A part of the phosphatide fraction | The declared figure | Balance | PE, PI, PA, oil, sterols | Other phospholipids and residual oil | Function in a formula | Emulsifier, mixed phospholipid source | Declared PC dose; dispersed systems | Label name | Lecithin (soya) | Phosphatidylcholine (soya) | Allergen | Soy declaration if soy-derived | Soy declaration if soy-derived The allergen row is easy to overlook. A soy-derived PC is still a soy ingredient for labelling purposes, and a soy-free claim requires a different plant source. ## Dose arithmetic and the label basis Work from the declared ingredient. A lecithin claim uses the weight of the mixture. A phospholipid claim divides by the phospholipid figure, or by the AI figure where that is the declared basis. A PC claim divides by the PC figure. Using the wrong divisor is the usual error. For 100 mg PC, a lecithin with 20% PC needs 500 mg, while a 90% PC grade needs about 111 mg. For 300 mg PC, the same two products need 1,500 mg and 333 mg. The 20% and 90% are examples; the certificate supplies the real divisor. A 60% phospholipid figure is not interchangeable with a 60% PC figure. If the brief uses them as if they were the same, the capsule weight can be wrong by a factor of three. Write the declared ingredient and the basis into the specification. If the label declares choline, divide by the choline figure, not by the lecithin or PC weight. PC contains choline in its head group, and a choline claim has its own conditions in the destination market. ## What the label and the regulatory file have to say In the EU, lecithin is E322 and appears on the ingredient list as lecithin, with the soy source declared. A PC ingredient is named phosphatidylcholine; if it is soy-derived, the soy declaration remains. The E322 entry covers lecithins and fractions obtained by physical procedures; whether a particular PC grade is sold under that entry or as a separate ingredient depends on how it is made and named, so the buyer's regulatory team checks it. In the US, lecithin is the common name in 21 CFR 184.1400, while phosphatidylcholine is a different ingredient name for the Supplement Facts panel. Soy is a major allergen, so a soy-derived PC must declare soy. A certificate for one form does not support a label for the other. Match the label, the certificate and the market file to the same name. ## Which one the formula needs Choose lecithin for emulsification, for a mixed phosphatide source, or for a formula that can carry the oil and the other classes. Choose a PC grade for a declared PC dose or a system built around one class. Choose neither for a soy-free label; change the source. Changing form is a change control, not a weighing adjustment. It alters the mass, the ingredient name, the allergen statement and the regulatory citation, and it should be documented before the first batch. The catalog specification is on the soy lecithin product page; the phosphatidylcholine page is the separate product; the grades page shows where this comparison sits in the range; the COA page explains how the figures are reported; the compliance page explains the market entries, and the identity page covers the profile tests. ### 03 Lecithin stability: hydrolysis, oxidation and the pack URL: https://nutrition.rainwoodbio.com/products/fatty-acids/lecithin/stability/ Reviewed: 2026-11-19 Two reactions set the shelf life of lecithin: hydrolysis, the reaction that raises the acid value, and oxidation, which raises the peroxide value and darkens the colour. Moisture and heat drive the first; oxygen, light and trace metals drive the second. The pack controls the moisture and the oxygen, while the store controls the heat and the light; a shelf-life figure without both is only a guess. In one lineLecithin fails in two ways, hydrolysis and oxidation; the moisture, the temperature and the oxygen the pack lets through decide which one moves first. ## The dry material: moisture, caking and the drum headspace Powder and fluid fail differently. A powder takes water from the air, becomes tacky, then cakes; the moisture dilutes the acetone-insoluble figure on an as-is basis and gives hydrolysis a medium. A fluid exposes its surface at the drum headspace and at every transfer; the surface oxidises and darkens first, and repeated opening resets the exposure. Keep the foil pouch closed and the drum headspace small. Record the opening date. A desiccant can support a seal but cannot replace one, and a nitrogen blanket is a separate request rather than a standard feature. After cold storage, let the pack reach room temperature before opening, so that water does not condense on the powder or inside the drum. ## The aqueous dispersion: the least stable format Water does not dissolve lecithin. The phosphatides hydrate and swell into lamellar or vesicular structures, which is the behaviour that makes lecithin an emulsifier and also the reason a clear drink is not the right application. In that dispersion, hydrolysis and oxidation continue, and the material can support microbial growth. An emulsion adds process variables. Homogenisation energy, droplet size, pH and preservative system each alter the rate, and the functional result may fail as separation or creaming before any chemical line moves. Test the finished emulsion, not only the raw powder. ## The stresses that move a lot Factors that move lecithin during storage | Factor | Effect | Control | Moisture | Hydrolysis, caking, as-is dilution | Sealed pack; dry store; desiccant as support | Heat | Faster hydrolysis and darkening | Cool store; controlled drum heater | Oxygen | Oxidation of the oil fraction | Small headspace; sealed pack; nitrogen on request | Light | Oxidation and colour change | Opaque or foil pack; dark store | pH | Hydrolysis in aqueous systems | Validate matrix pH; avoid extremes | Metal ions | Catalysed oxidation | Avoid iron and copper contact; chelator in formula | Microorganisms | Growth in aqueous dispersion | Hurdle technology; validated hold time These factors act together. A warm, humid store with an open pouch combines moisture and heat; an emulsion in clear glass at neutral pH combines oxygen, light and water. The useful question is not whether lecithin is stable in general, but how long this pack keeps it inside the specification. ## Designing the stability study Use three storage conditions for the warehouse and the stress case: 25 °C at 60% RH, 30 °C at 65% RH and 40 °C at 75% RH. Add a light-exposure arm, because a dark chamber does not exercise the photochemical route. Test AI or phospholipids, acid value, peroxide value, moisture, appearance and microbiology at each point, and add a functional test for an emulsifier grade. Report each result with its pack and lot family. A summary that says “stable” without the numbers is not a stability file, and a result from a different pack does not describe the pack you will buy. A 1 kg pouch, a 25 kg drum and a fluid pail each have different headspace and opening histories. ## How the finished formula shifts the risk A capsule fill is protected from bulk water but not from humidity; the shell and the fill exchange moisture, and the acid value can move inside a sealed capsule. An oil blend usually needs an antioxidant and often a chelator, and its headspace is part of the design. An emulsion has the most variables: pH, heat, oxygen and shear. A dry blend depends on the carrier and on the seal of the stick or pouch. An overage is a decision supported by data on the finished matrix. It cannot compensate for a pack that leaks moisture, and it should be written into the formula, not agreed verbally with production. ## Assigning a retest period No single shelf-life number applies across the forms. The retest interval is written into the specification, supported by a stability file for the pack, and reassessed when the source, the form or the pack changes. After the period, re-test the retained sample before extending use; do not assume a bulk figure transfers to a repack. Pack sizes are listed on the soy lecithin product page. Release testing is described on the COA page, ordering units on the MOQ page, and the assays in the analytical methods library. The quality page explains the release sequence. ### 04 Lecithin MOQ, packs and what a quotation needs URL: https://nutrition.rainwoodbio.com/products/fatty-acids/lecithin/moq/ Reviewed: 2026-11-19 Orders start at 1 kg in a foil pouch; a 25 kg fiber drum is the bulk pack; the catalog lead time is 1–7 days. For a quotation to be comparable, it has to name the source, the acetone-insoluble or phospholipid figure, the form and the allergen statement. A soy fluid and a soy powder are two different lines on the same quotation sheet. In one lineThe minimum is one kilogram because a lecithin order has to be a lot with a certificate, a retained sample and a pack that can travel intact. ## Why one kilogram is the minimum One kilogram is the smallest unit that can be a lot: it can be sampled, tested, retained and shipped without repacking. It covers a bench trial and an identity test with material left over. A smaller quantity is usually cut from a larger lot, and that split breaks the link between pack and certificate. A 25 kg drum is sized for production, not for a trial. It lowers handling per kilogram but raises the inventory and the number of openings. For a hygroscopic powder or a fluid, every opening is a storage event, so the right pack is the one the line will finish in a reasonable period. The form decides the container before the quantity does. A powder can travel in a pouch; a fluid needs a rigid pack with a closable headspace, and the 1 kg foil pouch is not a universal pack. A 1 kg order can travel as a parcel with its own documents, which helps when a trial must begin before the production schedule is settled. ## Pack options for powder and fluid Standard lecithin packs | Pack | Net weight | Form | Notes | Foil pouch | 1 kg | Powder | Light and moisture barrier; reseal after opening | Fiber drum | 25 kg | Powder | Inner liner; lot code on drum and liner | Rigid drum or pail | On request | Fluid | Headspace and seal; open-date record | Carrier-supported powder | On request | Powder | Carrier declared; bulk density changes The catalog form is a powder or a fluid. A carrier-supported powder is a separate specification as well as a separate pack, because the carrier changes the dose weight and has to appear on the label. ## From order to dispatch One to seven days covers order confirmation to dispatch for the catalog pack. Transit, customs and the customer's release come after that window, and a fluid pack or a custom powder adds time before dispatch. Request the dispatch date as well as the lead time. The lot documents should leave with the lot. A certificate that arrives after the material sits in quarantine and delays the first batch. ## Building a comparable quotation A lecithin quotation is comparable when six things are on it: - The material. Soy lecithin, the AI or phospholipid figure, and the form (powder or fluid). - The release lines. Moisture, acid value, peroxide value, class profile, metals and microbiology. - The quantity and container. Pouch (1 kg), drum (25 kg), fluid pail or carrier-supported powder. - The delivery terms. Destination country, delivery point and Incoterm. - The document set. COA, specification, SDS, allergen, GMO, solvent and market declarations. - The use. Supplement or food, and the destination market for the finished product. Without the first two items, quotations cannot be compared. Commercial terms are not published here; they belong on the quotation. ## What a 1 kg sample has to prove The 1 kg pouch is the unit we qualify. Put it through AI, phospholipids, moisture, acid value, peroxide value, metals and microbiology, then retain material from that same pouch. The pouch code, the certificate and the quotation should carry the same lot identifier. A bench split is a repack. Label it as one and do not assume the production drum will match a split taken from another lot. ## What to agree before the first shipment Before the first shipment, agree the specification revision, a certificate for each lot, a retained sample, a retest interval and a change-control procedure. A change of soy source or of form belongs in that agreement because it can move the allergen statement and the phospholipid profile. A return should be settled by testing the retained sample jointly. Name the referee laboratory in advance. Start with the soy lecithin product page for the catalog specification. Release tests are described on the COA page. Market files are handled on the compliance page, and the fraction has its own phosphatidylcholine page. Testing and release are described in the methods library and on the quality page. ### 05 The regulatory file for soy lecithin URL: https://nutrition.rainwoodbio.com/products/fatty-acids/lecithin/compliance/ Reviewed: 2026-11-19 Soy lecithin sits inside two regulatory systems at once: an additive entry that fixes its purity criteria and a labelling rule that fixes how the soy source is declared. In the EU the additive is E322; in the US the ingredient is GRAS under 21 CFR 184.1400. A finished product also needs its own route check, which the buyer's regulatory team performs. In one lineThe specification covers the lot; the regulatory file shows the additive entry, the contaminant limits and the soy declaration for the destination. ## The three parts of the file A lecithin file has three parts that are often mixed together. The first is the specification: what the material is and which limits it meets. The second is the lot evidence: the certificate and the test results. The third is the market route: the additive or ingredient basis, the label and the claim rules. A folder that holds only the first two is a purchasing file, not a regulatory file. Keep the allergen statement, the GMO statement, the origin record and the residual-solvent statement in the same version-controlled set. A label review based on an old specification is a common and avoidable error. ## European Union E322 is authorised under Regulation (EC) No 1333/2008, and Commission Regulation (EU) No 231/2012 supplies the purity criteria. For lecithins the entry requires acetone-insoluble matter of at least 60.0%, an acid value no higher than 35 mg KOH/g, a peroxide value no higher than 10, loss on drying no higher than 2.0% at 105 °C for one hour, arsenic no higher than 3 mg/kg, lead no higher than 2 mg/kg and mercury no higher than 1 mg/kg. The hydrolysed form has its own AI minimum of 56.0% and an acid-value ceiling of 45. Labelling is separate. Regulation (EU) No 1169/2011 lists soy in Annex II, and the exemption for fully refined soybean oil does not cover lecithin, so the source must be declared. A GMO source raises a labelling question under Regulation (EC) No 1829/2003. Food supplements also fall under Directive 2002/46/EC. Check the consolidated texts, because these instruments are amended. ## United States 21 CFR 184.1400 affirms lecithin as GRAS for use in food under current good manufacturing practice and incorporates the Food Chemicals Codex monograph by reference. That status belongs to the ingredient; it does not clear a finished product, a dose or a claim. FALCPA lists soy among the major allergens, and soy lecithin is not exempt. The Supplement Facts panel and any structure/function claim are reviewed on their own terms. ## The catalog against the additive specification Soy lecithin: catalog limits and the EU E322 specification | Parameter | Catalog | E322 specification | Acetone-insoluble matter | ≥60.0% | ≥60.0% | Acid value | ≤30 mg KOH/g | ≤35 mg KOH/g | Moisture or loss on drying | ≤1.0% moisture | ≤2.0% loss on drying | Peroxide value | — | ≤10 | Lead | ≤3 mg/kg | ≤2 mg/kg | Arsenic | ≤2 mg/kg | ≤3 mg/kg | Mercury | ≤0.1 mg/kg | ≤1 mg/kg | Cadmium | ≤1 mg/kg | — Compare the catalog with the additive entry line by line. The catalog is stricter on acid value, moisture, arsenic and mercury; it matches on AI; it is looser on lead, where 3 mg/kg is allowed against the E322 limit of 2 mg/kg. Peroxide value is absent from the catalog and capped at 10 in E322. The moisture comparison is not exact: the catalog limit is moisture, while E322 limits loss on drying. A certificate that meets one number can miss the other, so the method must be printed beside the result. ## Claims and the label Lecithin is an emulsifier, and that is a functional description rather than a health claim. In the EU, Regulation (EC) No 1924/2006 governs health claims; a choline claim is tied to the choline content of the finished product and its own conditions, not to the lecithin weight. US structure/function wording is reviewed separately and must be truthful and not misleading. No disease-related claim is made here, and the certificate does not authorise one. A claim review is a label task, not a specification task. ## Documents to keep with the lot The lot file should contain the specification version, the certificate, the safety data sheet, the allergen statement, the GMO or non-GMO statement, the origin file, the residual-solvent declaration and, where the additive route applies, an E322 compliance statement. Add contaminant and microbiological results and any halal or kosher certificate the market needs. Name a missing document before the order. A gap discovered at the port is a delay, and an undated statement is not evidence of the current specification. ## Before the order is placed - The specification version, CAS 8002-43-5 and the soy source are written down. - The quotation, specification and certificate describe the same grade and form. - The lot file holds the certificate, technical data sheet and safety data sheet, plus the allergen, GMO, origin and solvent declarations. - Each certificate line is compared with the catalog and, where E322 applies, with the additive entry. - The finished label declares soy. - The destination route and the claim have been approved by the buyer's regulatory team. For the catalog specification, start with the soy lecithin product page. The COA page walks through a lot certificate; the identity page sets out the source and profile evidence; the methods library describes the assays. The quality page covers release, and the EU regulatory note gives the framework reference. ### 06 How to prove a lecithin lot is soy lecithin URL: https://nutrition.rainwoodbio.com/products/fatty-acids/lecithin/identity/ Reviewed: 2026-11-19 Proving a lecithin lot means proving two things at once: that the material is a phospholipid mixture of the stated strength and that it comes from the stated plant. Acetone-insoluble matter answers the first; the class, fatty acid and sterol profiles answer the second. A certificate with only the first number has described a quantity, not an identity. In one lineIdentity is the source plus the profile: acetone-insoluble matter says how much phospholipid is there, and the class and fatty acid profiles say which lecithin it is. ## Four layers of evidence Identity is built in four steps, and each step can fail on its own. The document step names the source and the grade; the composition step measures the phosphatide fraction; the profile step compares the class and fatty acid patterns with a reference; the balance step checks moisture, acid value and oil against the other figures. Four layers of soy lecithin identity | Layer | Question | Test | What it proves | Document | Are the source and grade named? | Name, CAS 8002-43-5, source, additive entry | Paperwork only | Composition | How much phospholipid is present? | Acetone-insoluble matter, phosphorus | The quantity, not the identity | Profile | Which lecithin is it? | PC, PE, PI and PA by HPLC or TLC; fatty acids and sterols by GC | The source and the class pattern | Mass balance | Is it diluted or hydrolysed? | Moisture, acid value, peroxide value, oil | Consistency of the numbers Most certificate disputes stop at the first two steps. A supplier can name soy lecithin correctly and still ship a blend, a different source or a diluted powder. The later steps are what catch that. ## The ratios that should agree Several ratios should be internally consistent. The acetone-insoluble figure and the phospholipid figure should sit close together, allowing for the different methods; phosphorus times the stated factor should reproduce the phospholipid figure; and the PC, PE, PI and PA pattern should fit the source. The fatty acid profile adds a second, independent check: soy lecithin contains a measurable alpha-linolenic fraction, while sunflower lecithin carries very little. Ratios to check on a lecithin certificate | Ratio | What it checks | What a shift means | Acetone-insoluble matter against phospholipids | Agreement within method uncertainty | A different basis, a factor error or non-phospholipid residue | Phosphorus against phospholipids | The stated factor reproduces the figure | Dilution or an inconsistent factor | PC against PE and PI | The class pattern fits the source | Another source or a PC fraction | Alpha-linolenic acid in the fatty acid profile | Soy carries a measurable fraction | A different plant source | Sterol profile | Soy sterols differ from sunflower sterols | A source statement that does not fit If AI is high and phospholipids are low, the basis or the factor is wrong, or the residue includes non-phospholipid material. If PC is high while PE and PI are low, the lot may contain a PC fraction. If alpha-linolenic acid is absent, the source is probably not soy. A sterol profile can settle a source dispute that the fatty acid profile leaves open. ## Why X-ray diffraction does not identify lecithin XRD is not an identity method for lecithin. The commercial material is amorphous, so the pattern is a broad halo rather than a set of sharp reflections, and there is no reference pattern that says “soy lecithin”. A certificate that reports “XRD conforms” without naming a phase has reported nothing that can be checked. The technique is still useful as a screen for crystalline carriers. Sharp peaks in a powder mean a crystalline diluent is present, and the peak positions can name it. That is a purity check on the carrier, not proof of the lecithin. FTIR can show the phosphate and ester bands and support the phospholipid assignment, but it does not distinguish soy from sunflower. The class and fatty acid methods do. The analytical methods library explains what each technique can and cannot prove. ## How substitution shows up Common lecithin substitutions and the signals | Adulterant | What it does | Signal | Test | Soybean oil | Raises the oil fraction and lowers AI | Low AI; high oil; fatty acid profile | AI, fatty acid profile | Sunflower lecithin | Changes the fatty acid and sterol profile and the allergen statement | Alpha-linolenic near absent; sterol mismatch | Fatty acid and sterol GC | PC isolate or synthetic PC | Raises PC without the rest of the class pattern | PC high; PE and PI low | Phospholipid profile; fatty acid profile | Water | Raises moisture and dilutes the as-is AI figure | Moisture high; AI low as-is | Moisture, AI | Residual hexane | Solvent left from extraction | Solvent odour; headspace result | Residual-solvent GC Economic substitution is the usual pattern: a cheaper oil, a different lecithin, a PC fraction sold as the whole, or water. Colour is a poor test because fresh fluid lecithin and oxidised lecithin can both be dark. The reliable signals are the AI-to-phospholipid agreement, the class pattern and the fatty acid profile. ## Writing identity into the specification - “Soy lecithin, CAS 8002-43-5, source named, E322 grade where the additive route applies.” - “Acetone-insoluble matter ≥60.0%; phospholipids ≥60.0% with the phosphorus factor stated.” - “Phospholipid class profile (PC, PE, PI, PA) reported; fatty acid and sterol profiles available.” - “Moisture ≤1.0%; acid value ≤30 mg KOH/g; peroxide value reported.” - “Heavy metals, microbiology and residual solvent as listed.” - “Soy allergen statement and GMO statement attached.” - “Form, carrier and particle size for a powder.” ## Questions to put to the supplier - Which source is this lot, and where was the soy grown? - What are the acetone-insoluble and phospholipid figures, and which factor was used? - Can you provide the phospholipid class profile and the fatty acid profile for the lot? - What are the acid value and peroxide value, and how were they measured? - If the source or the AI figure is challenged, is a joint re-test using the retained sample acceptable? The five answers together form an identity file; a single acetone-insoluble figure does not. For the catalog specification, see the soy lecithin product page. The COA page explains where each figure belongs, the grades page compares the forms, and the level-four comparison covers the PC fraction. The phosphatidylcholine page is the separate product. ### 01 What the COA for nervonic acid actually contains URL: https://nutrition.rainwoodbio.com/products/fatty-acids/nervonic-acid/coa/ Reviewed: 2026-11-19 A nervonic acid certificate reports appearance, identity by GC, the C24:1 assay, the neighbouring acids, acid value, moisture, the metals, microbiological counts and mesh size. The batch result has its own column beside the limit, and the assay has to say which basis it was measured on. The numbers in the first table are the catalog gate; the certificate is what a particular pack was released against. In one lineA C24:1 percentage is only the identity when the certificate shows the chain length, the free-acid content and the basis behind the number. ## The certificate as a test report An audit reads a certificate one line at a time. Each line should say what was measured, how, and the limit the lot had to meet. A line that says “conforms” and nothing else asks the reader to take the conclusion on trust, which is the opposite of what the document is for. Lines, methods and gates · nervonic acid | Line | Method | Catalog gate | Appearance | Visual | White to off-white waxy powder | Identification | GC retention against a C24:1 standard | Matches the reference | Assay, C24:1 | GC-FID of methyl esters | ≥90.0% | Acid value | Titration, mg KOH/g | Reported | Moisture | Loss on drying, gravimetric | ≤1.0% | Metals | ICP-MS after digestion | Pb ≤3 · Cd ≤1 · As ≤2 · Hg ≤0.1 mg/kg | Microbiology | Plate count, with absence enrichment | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · absence confirmed for E. coli and Salmonella | Mesh | Sieve, 80 mesh | ≥95% through Two of those lines carry the identity. The chromatogram shows that the main peak is C24:1; the assay says how much of the material that peak represents. A lot can satisfy the first and miss the second, and a certificate that prints only a percentage has settled neither point. ## Which basis the percentage stands on “90%” can mean three different numbers, and the certificate should say which one it means. The first is calibration: normalising peak areas to the identified total is common, and it says nothing about material that never left the column. An internal standard, by contrast, turns peak area into mass. The second is the molecule on the balance. Methyl esters are what the instrument sees, and the ester of nervonic acid weighs 380.66 g/mol where the acid weighs 366.63. Reporting 90.0% as the ester is therefore about 86.7% as the acid once the 0.963 factor is applied. Whichever number the certificate uses, the specification and the label must use the same one. The third is water. With moisture capped at ≤1.0% the correction is small, but the assay line should still say whether it is as received or dried. A chromatogram with the integration and the standard settles all three; a bare percentage settles none. ## The limit and the result are different columns Every line needs two numbers: the limit the lot was released against, and the figure the laboratory found. They are not interchangeable, and a result column that repeats the range has told the reader nothing about the drum. What the result side of the certificate should show | Line | What to look for | Why it matters | Assay | A result, a basis and an ester factor | A percentage without a basis cannot be compared | Neighbouring acids | C24:0 and C22:1 from the same injection | Shows how hard the cut was run | Acid value | mg KOH/g and the titration method | Separates a free acid from an ester | Moisture | A measured figure | Closes the mass balance | Metals | One figure per element | A sum hides the element that failed | Microbiology | A count plus the absence wording | Two different questions on one line | Mesh | Measured percentage through the sieve | Describes the mill, not the molecule The acid value earns its place on a free-acid product, and it is the simplest cross-check on the page. Pure nervonic acid calculates to about 153 mg KOH/g; a 90% acid whose balance is neutral lipid lands nearer 138, while one whose balance is other free acids stays close to 153. That one titration separates a diluted acid from a mixed acid. ## What moves between batches At 90%, nervonic acid is a fractionated material. The enrichment, usually a crystallisation from a seed oil with a urea adduction step, sets how much C24:0 and C22:1 remain beside the C24:1. A low assay lot carries more saturated C24:0, and the melting range betrays it: the catalog range is 42–44 °C, and a wider, higher or lower range points to a different distribution. Colour, moisture and mesh track the drying and milling steps, not the chemistry. The 80 mesh line describes the mill, so a new sieve can move it while the assay sits still. A finer powder also offers more surface to oxygen, and a lot milled harder can oxidise sooner at an unchanged assay. Look at the trend across lots rather than at one result near an edge: assay sliding down, acid value sliding up, or an extra peak beside C24:1. Pouch, drum and retained sample should all show the code printed on the certificate. ## When to order an outside test An outside laboratory earns its place in four situations: a source you have not used, a first entry into a regulated market, a chain-length claim the supplier's paperwork does not support, and any result you doubt. A useful panel is GC-FID on a long polar column for identity and assay, GC-MS to confirm the C24:1 peak, titration for acid value, moisture, peroxide and anisidine values, ICP-MS for the metals and a microbiology set. Ask for cis and trans to be reported on separate lines. The trans isomer has the same chain length and a subtly different retention, and not every routine column resolves the pair, so the report should state whether the separation was attempted. A “not detected” entry with no detection limit is a statement about the method rather than the sample. Keep the chain of custody intact. The referee should be able to match the jar on the bench to the code on the report. If a result is disputed, hand over that jar, the specification and the certificate, and ask for a separation rather than another run of the same percentage. ## What to compare between suppliers Six lines make a fair comparison: identity, meaning the peak and the column that resolved it; assay and its basis; the C24:0 and C22:1 figures; acid value; moisture and metals; and the pack with its code. Two quotations that agree on 90% but disagree on the ester factor or the acid value are not selling the same material. The next layer is provenance: which seed oil the lot came from, which site ran the enrichment, and which mill set the mesh. A macadamia-derived lot and an Acer truncatum-derived lot are the same molecule with different source records, and that record is what the allergen and origin statements rest on. The catalog gate is published on the nervonic acid product page. The chain-length tests are set out on the identity page; the form options are on the grades page; the chromatographic background is in the analytical methods index; the release routine is set out on the quality page. ### 02 Nervonic acid grades: assay, form and the source record URL: https://nutrition.rainwoodbio.com/products/fatty-acids/nervonic-acid/grades/ Reviewed: 2026-11-19 Nervonic acid is bought as a free acid with a C24:1 minimum, and the grade question has three parts: how high that minimum is, whether the material is a powder or an oil blend, and which seed oil it was fractionated from. The catalog minimum is ≥90.0% by GC in an 80 mesh powder, packed in a 1 kg pouch or a 25 kg drum. A higher minimum, or an oil format, is a different specification rather than another pack. In one lineThe grade is set by the C24:1 minimum, the physical form and the source record, and changing any one of them makes it a new specification rather than an upgrade. ## Why a fractionated acid comes in grades Nervonic acid is a minor component of the oils it comes from. A seed oil carries a few percent at most, so a 90% material is the product of an enrichment step, usually crystallisation, urea adduction or a combination of the two. That step is a separation, not a synthesis: it concentrates C24:1 and leaves the saturated C24:0 and the shorter C22:1 behind in proportion to how hard the cut is run. Two consequences follow. The assay minimum is a commercial choice about yield, because pushing the cut higher loses material, and the residue is not inert: C24:0 is a harder wax with a higher melting point, and C22:1 is a different monounsaturated acid. A buyer who compares only the headline percentage is comparing the yield of a cut, not the material. The physical form is the second axis. The free acid melts at 42–44 °C, so a powder only exists below that temperature; above it the material is a liquid, and on cooling it sets into a waxy solid that may not return to the same mesh. An oil blend avoids that cycle by keeping the acid dissolved in a carrier, but it carries a much lower C24:1 per gram. ## The grades side by side Nervonic acid grades and what changes between them | Property | 90% powder (catalog) | Higher-assay fraction (by agreement) | Oil blend (on request) | C24:1 minimum | ≥90.0% by GC | A higher minimum, agreed per order | Stated on the blend specification | Form at 25 °C | Waxy powder, 80 mesh | Waxy powder or flake | Liquid oil | Melting behaviour | 42–44 °C | Narrower range, closer to the pure acid | No melting point of its own | Carrier | None | None | A declared carrier oil | C24:1 per gram | About 900 mg | Higher, in proportion to the assay | Set by the blend ratio | Label name | Nervonic acid | Nervonic acid | The blend and its carrier both named | What changes on switching | Reference grade | Fill weight, assay line, yield | Fill weight, carrier, allergen statement The last row decides most projects. A higher assay changes the mass that delivers a given amount of C24:1, and an oil blend changes both the mass and the ingredient list. Neither is a drop-in for the powder. ## The powder, the melt and the warehouse At 25 °C the catalog grade is a white to off-white waxy powder, ≥95% through 80 mesh, with loss on drying ≤1.0%. It flows like a coarse flour when it is cold and dry, and it stops flowing when it is warm. The melting point is 42–44 °C, which is inside the range of a closed vehicle in summer and close to the set point of a warm warehouse. A pack that has softened and re-solidified can still be in specification on assay and out of specification on particle size: the powder has sintered into lumps, the 80 mesh figure no longer describes the pack, and a capsule filler will struggle. That is a physical failure with a chemical certificate still attached, and it is the usual reason a lot is rejected in a hot climate. The oil blend removes the melting risk and adds another: the carrier oil has its own peroxide value, shelf life and label entry. The blend is also far more dilute, so the pack size per unit of C24:1 rises. For a softgel that is acceptable; for a capsule that must stay small it usually is not. ## Dose arithmetic and the fill A 500 mg fill of the 90% powder carries about 450 mg of C24:1. The same fill of a higher-assay fraction carries more in proportion to its assay. A 10% oil blend needs 4,500 mg to deliver the same 450 mg, several large softgels rather than one capsule. None of this is a dose recommendation; it is the arithmetic that keeps the label, the fill weight and the certificate in agreement. Two conversions sit behind those numbers. The assay may be reported on the methyl ester rather than on the free acid, which moves a 90.0% figure to about 86.7% acid, and the blend ratio may be quoted on the oil rather than on the finished blend. Ask for the basis and the ratio in writing before the fill weight is fixed, because both change the mass on the label. A tablet is possible with the waxy powder, but the compression step can squeeze material to the surface and leave a patchy, waxy face. If the project needs a granule or a specific flow, that is a particle-size change and it belongs in the specification, not in the purchase order note. ## What to write into the specification - “Nervonic acid (cis-15-tetracosenoic acid), CAS 506-37-6, C24H46O2, free acid.” - “C24:1 ≥90.0% by GC-FID, with the ester factor and the calibration stated.” - “C24:0 and C22:1 reported on the same run; the agreed limits named.” - “Acid value reported; consistent with the free acid at the declared assay.” - “Melting point 42–44 °C; loss on drying ≤1.0%; ≥95% through 80 mesh.” - “Source seed oil named; allergen and origin statements attached.” - “Pack, storage condition and retest period stated on the specification.” ## When the other grade is the wrong choice A higher assay is the wrong purchase when the label does not need it. The extra percentage buys fill-weight room, and when the capsule is already comfortable there is little to gain. It is also the wrong purchase when the specification has not been rewritten, because an old assay line on a new grade is a non-conformance waiting at the goods-in gate. An oil blend is the wrong choice for a dry capsule, for a label that must list a single ingredient, and for any market where the carrier brings its own regulatory or allergen question. The powder is the wrong choice for a softgel line, for a formula that must stay liquid at room temperature, and for a warehouse that cannot hold the pack below 40 °C. The published catalog data sits on the nervonic acid product page; the release lines are on the COA page; the acid-by-acid comparison is on the nervonic versus oleic page; a different way of carrying an oil is shown on the flaxseed oil powder page; the shelf-life rules are on the stability page. ### 02.1 Nervonic acid vs oleic acid: two monounsaturated acids URL: https://nutrition.rainwoodbio.com/products/fatty-acids/nervonic-acid/grades/nervonic-acid-vs-oleic-acid/ Reviewed: 2026-11-19 Nervonic acid is C24:1 and oleic acid is C18:1. Both are cis-monounsaturated acids of the n-9 series, separated by six methylene groups, and that difference is enough to turn a liquid oil into a wax: oleic acid melts near 13–16 °C and nervonic acid at 42–44 °C. The two are not interchangeable in a formula, an assay or a label. In one lineSix carbons separate a liquid oil from a wax: C18:1 stays fluid at room temperature and C24:1 does not. ## Two names, one series, different chains Oleic acid is cis-9-octadecenoic acid: eighteen carbons with the double bond between C9 and C10, counted from the carboxyl end. Nervonic acid is cis-15-tetracosenoic acid: twenty-four carbons with the double bond between C15 and C16. Counted from the methyl end, both double bonds sit nine carbons in, which is why both are called n-9 or omega-9 acids. The six extra carbons sit between the carboxyl group and the double bond, so the bond keeps its distance from the methyl end while moving six carbons further from the carboxyl group. The extra length, not a different unsaturation pattern, is what raises the melting point and makes the longer acid a solid at room temperature. The names also carry a trap. “Omega-9” describes a family and not a material, so a supplier can call an oleic-rich oil an omega-9 product without telling the buyer which acid is inside. The chain length and the CAS number are what name the material. ## The two acids side by side Nervonic acid and oleic acid compared | Property | Nervonic acid | Oleic acid | Chain and series | C24:1, n-9 | C18:1, n-9 | Formula | C24H46O2 | C18H34O2 | Molecular weight | 366.63 | 282.46 | CAS number | 506-37-6 | 112-80-1 | Melting point | 42–44 °C | About 13–16 °C | Form at 25 °C | White to off-white waxy powder | Clear to pale yellow liquid | Iodine value, calculated | About 69 g I₂/100 g | About 90 g I₂/100 g | Acid value, calculated | About 153 mg KOH/g | About 199 mg KOH/g The calculated values are arithmetic from the formula, not batch results, but they set the range in which a measured figure is plausible: an iodine value near 90 on a material sold as nervonic acid is not a rounding difference. ## The melting point is the practical difference Oleic acid can be poured. That makes it easy to use as a carrier, a diluent or a liquid fill, and it is why formulators use it when a waxy acid has to be handled at room temperature. Nervonic acid cannot be poured below about 42 °C; it is a waxy powder that softens in a warm room and melts in a warm vehicle. A blend that contains both is a liquid only because the oleic acid is doing the dissolving. A capsule can take the powder as a fill or the oleic-rich blend as a liquid, and the two are different dosage forms with different fill weights. A tablet press can take the powder, with the compression problems that a wax brings. A warehouse at 30 °C is comfortable for both; a container at 45 °C is comfortable for oleic acid and not for nervonic acid, which will sinter and set into a lump. Solubility is the other difference in practice. Neither acid dissolves in water, and both dissolve in oils and organic solvents, so neither can go into an aqueous drink without an emulsifier. The longer chain is more lipophilic, so it partitions into the oil phase and does not act as a co-emulsifier in the way the shorter acid can. A formulator who swaps one for the other in an emulsion is changing the interfacial behaviour as well as the label. ## How the lab tells them apart On a long polar column the two methyl esters are far apart: C18:1 elutes around an equivalent chain length of 18 and C24:1 near 24, so there is no co-elution risk and no need for a special column to separate them. The risk is not analytical but commercial: a certificate that reports a total monounsaturated figure, or a fatty acid total, hides which acid is present. Three measured values separate them without a chromatogram. The iodine value is about 69 against about 90. The acid value is about 153 against about 199 mg KOH/g. And the ester factor differs, because each methyl ester has its own molecular weight: 0.963 for nervonic acid and 0.953 for oleic acid. A mixed profile cannot be converted with a single factor, a small error on a pure material and a larger one on a blend. The first place to look for a substitution is the C18:1 peak itself. Oleic acid is a commodity, liquid and easy to blend, so a diluted nervonic acid lot usually shows a C18:1 peak that the specification never mentioned. Ask for the full profile, not only the C24:1 figure. ## Label wording and the market file Both acids count as monounsaturated fat in a nutrition declaration, so the declaration alone does not distinguish them. A declaration that names nervonic acid, in milligrams, has to be met with nervonic acid: oleic acid cannot be counted toward it, even though both are monounsaturated and both are n-9. The ingredient list names what was used, and “oleic acid” is a different ingredient name from “nervonic acid”. The regulatory history is different too. Oleic acid is a long-established food and excipient material; a 90% C24:1 speciality is a fractionated product whose route in the destination market is a separate question. The buyer’s regulatory team confirms that route, and a supplier statement about the source oil is not a substitute for it. ## When the substitution is wrong Oleic acid is a legitimate carrier in an oil blend, provided the blend is declared and the C24:1 per gram is recalculated after dilution. It is the wrong material wherever the label, the specification or the claim names nervonic acid: an identity specification, a named-acid declaration, a chain-length claim and a stability file written for the waxy solid all fail once the C18:1 share rises. The reverse mistake is subtler. A buyer who needs a liquid at room temperature should not buy the powder and add oleic acid at the bench without rewriting the specification; the dilution changes the assay, the acid value, the melting behaviour and the label. Write the C24:1 minimum, the C24:0 and C22:1 limits, the acid value and the ester basis into the specification, and report the C18:1 figure even when no limit is set. The catalog specification is on the nervonic acid product page; the form options are on the grades page; a second fatty-acid comparison, between an oil and an oil powder, is on the flaxseed oil powder page; the chromatographic background is in the analytical methods index; the release routine is set out on the quality page. ### 03 Nervonic acid is a wax: heat, oxygen and the pack decide the shelf life URL: https://nutrition.rainwoodbio.com/products/fatty-acids/nervonic-acid/stability/ Reviewed: 2026-11-19 Nervonic acid melts at 42–44 °C and carries one cis double bond, so two things shorten its life: heat that softens or melts the powder, and oxygen that attacks the double bond. In a sealed, cool, dark pack the assay holds; an opened pouch in a warm store shows caking first and oxidation later. Shelf life belongs to the pack and to the storage condition, and it is established by data on that pack; the certificate has nothing to say about it. In one lineHeat softens the powder and oxygen attacks the double bond, so the pack and the store decide the shelf life before the assay does. ## The powder: melting, moisture and surface The catalog sets loss on drying at ≤1.0%, which is a release gate rather than a storage allowance. A foil pouch that is opened and folded over is no longer a sealed pack: the headspace now holds humid air, the moisture climbs, and the as-is assay falls as the dry matter is diluted. The material holds the water on the surface and in the crystal boundaries, which is where caking begins. The melting point is the handling limit. At 25 °C the material is a hard wax, and the powder is stable as long as the pack stays below about 40 °C. A loading bay, a closed vehicle or a rooftop container can exceed that. The powder then sinters, the 80 mesh figure stops describing the pack, and the lot fails on particle size while the assay is untouched. Light is the second exposure. A monounsaturated acid has no strong chromophore, so direct light matters less here than for a polyunsaturated oil, but light and oxygen act together on the double bond and the first visible sign is a yellowing of the white powder. Keep the material in the foil or an opaque container, and read a colour shift as a reason to test, not a cosmetic issue. ## The melt and the oil blend This acid does not dissolve in water, so the useful “solution” questions are the melt and the oil blend. Melting is the obvious way to disperse it, and it is also the step that does the most damage: the material is held at 50–70 °C, fully liquid, with a large surface exposed to air, and every ten degrees roughly doubles the oxidation rate. A brief melt at 45 °C and a two-hour hold at 65 °C are not the same process. An oil blend is gentler on the acid and harder on the blend. The carrier oil brings its own peroxide value and its own shelf life, and the mixture can oxidise faster than either component alone if the carrier is already oxidised. Warm the oil only as far as the acid needs, keep the headspace low, and measure the blend rather than assuming the powder's stability carries over. On cooling, the melt does not always return to the same solid. It can set as a coarse crystalline mass or develop a pale bloom on the surface, and either one changes the flow and the appearance. If a process needs a melt, the cooling step belongs in the process description, not only in the formulation. An aqueous drink is the hardest format: the acid has to be emulsified, and the emulsion brings its own risks of creaming, pH drift and heat damage. A powder stick keeps the acid dry until use. ## What drives degradation Factors that move nervonic acid during storage and processing | Factor | What it does | Control | Heat above 40 °C | Softens and sinters the powder; melts the acid above 44 °C | Cool store; controlled melt temperature | Oxygen | Oxidises the cis double bond; yellowing, off-odour | Sealed pack; low headspace; short melt hold | Light | Accelerates oxidation at the surface | Foil or opaque container; dark store | Moisture | Lifts loss on drying, cakes the powder and dilutes the as-is assay | Keep the pouch closed; add desiccant in humid stores | Metal ions | Catalyse oxidation; colour shift | Avoid iron and copper contact in process | Time at temperature | Extends every other effect during a melt or a blend | Cap the hold time; cool quickly ## A stability protocol for this material Two conditions cover the warehouse: 30 °C/65% relative humidity as the intermediate point, and 25 °C/60% for the long term. The accelerated condition needs a comment: 40 °C/75% relative humidity is only two to four degrees below the melting point, so the report should confirm that the sample stayed solid and was not a melt study. A 50 °C arm is a different experiment, useful for a process hold but not a substitute for the solid-state condition. Test assay, acid value, peroxide value, anisidine value, appearance, loss on drying and melting point at each point; test microbiology at release only. Add a light-exposure arm, because a dark incubator cannot see the failure mode that a window produces. Add an in-use arm for the 1 kg pouch: open it, take a portion, reseal it, and follow the remainder for the stated in-use period. Ask for the numbers point by point rather than a summary that says “passed”, and ask which pack and lot family the file covers; a summary for a different pack is an indication, not evidence. ## The finished formula changes the answer A hard capsule keeps water activity low, yet the shell and the fill excipients still pass moisture between them. Watch the moisture figure at release and after storage, and inspect the fill: a waxy fill that has softened and set again can pull away from the shell. A tablet adds compression, which can push waxy material to the surface and leave a mottled face; a binder and a granule may be needed, and that is a specification change. An oil blend or a softgel moves the question to the carrier: its peroxide value at release, its own antioxidant strategy and its own retest period. An emulsion adds pH, homogenisation heat and physical separation. Bulk data on the ingredient is where the formulator starts; it is never the whole answer. Whether an overage is applied is a label and stability decision for the brand. It will not fix a pack that leaks or a hold that ran long. ## Setting the retest period There is no single shelf-life number for nervonic acid. A retest period is written onto the specification for a named pack and backed by that pack's stability file. Here the physical failure can arrive before the chemical one: a lot can keep its assay and still be unusable because it caked or melted in transit. When the retest period ends, put the retained sample back through the assay before extending anything. No extension by assumption, and no bulk number carried over to a repack. Pack options appear on the nervonic acid product page; the release lines are on the COA page; pack sizes and lead time are covered on the MOQ page; the oxidation limits used for an oil carried on a carrier are described on the flaxseed oil powder page; the release workflow sits on the quality page. ### 04 Nervonic acid: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/fatty-acids/nervonic-acid/moq/ Reviewed: 2026-11-19 Nervonic acid ships from a 1 kg minimum: one foil pouch, and a 25 kg fiber drum for bulk. Standard packs dispatch in 1–7 days. A firm quotation needs the buyer to state the C24:1 minimum and its basis, the physical form, the pack, the destination, the documents required and what the material will be used for, because a 90% powder and an oil blend are quoted and specified as separate items. In one lineA kilogram is the minimum because a waxy speciality is bought as a traceable pack, not as a scoop from a drum. ## Why the smallest order is a kilogram One kilogram covers three jobs at once: a bench trial, the retained sample that the trial is judged against, and an independent GC run. It is also light enough to travel as a parcel, which matters when a formulator wants material before the production slot is booked. The pouch carries a lot code, and the certificate is written against that code, so a trial result points back to a real lot. Splitting a kilo down is possible, but it is a repack. The material leaves its original pack, takes a new lot identity and gains a fresh headspace. With a waxy solid the cut surface is also a new oxidation surface, and a small container often has to be warmed before the material will come out. Traceability is what gets lost, and it is worth more than the few hundred grams that were saved. The 25 kg drum is the production pack. It cuts handling per kilogram, but it commits inventory to a single lot and holds it through the retest period. That is the buyer's stock decision to make. ## Pack sizes and forms Standard nervonic acid packs | Pack | Net weight | When it is used | Handling note | Foil pouch | 1 kg | First trial, sample retention, small batch | Foil is the light and moisture barrier; close it properly after opening | Fiber drum | 25 kg | Production runs | The liner does the sealing; record the opening date | Oil blend | On request | Softgel or liquid fill | Carrier and ratio go on the specification and the label The catalog form is the 80 mesh powder; an oil blend is a separate specification rather than another way of packing the same powder. Mesh matters more here than it does for a free-flowing salt. A finer grind sinters faster in a warm store, and a coarser one may not blend evenly into a capsule fill. ## From order to dispatch Standard packs are quoted at 1–7 days from confirmation. The clock starts at the order and stops at dispatch; the transit, the customs entry and the customer's release all sit outside that window. A blend, a different mesh or a special pack needs its own lead time, quoted as a separate line. Ask for the dispatch date, and read the lead time as a range. A drum moves on a pallet, a pouch moves as a parcel, and the trade term says who arranges freight and who clears entry. In summer, ask about the route too: a container that stands at 45 °C will deliver a caked drum with a perfect assay. ## What has to be in a quotation Six details make a quotation firm enough to compare: - Material. Nervonic acid, CAS 506-37-6, free acid, with the seed oil it was fractionated from named. - Assay and basis. The C24:1 minimum, the GC method, how the peaks were calibrated and whether the ester factor was applied. - Form. 80 mesh powder or an oil blend, with the carrier and the ratio if blended. - Volume and pack. A single 1 kg pouch, a single 25 kg drum, or a non-standard pack agreed in writing. - Destination and trade term. The country, the port or delivery address, and the Incoterm. - Documents and use. COA, specification, SDS, any market statement, and what the material will go into. Three different readings of “90%” can sit behind one quotation, so the basis and the form are not optional detail. Commercial terms are not published on this page; they belong on the quotation. ## Qualification needs a lot code The 1 kg pouch is the qualification lot. Run GC identity, the C24:1 assay, acid value, loss on drying, peroxide value and melting point, then keep part of the same pouch as the retained sample. Sample, certificate and quotation should carry one lot code. A sample with no lot behind it cannot support a scale-up decision. If a few grams are needed for bench work, raise it before the order. A split from a drum is a repack with its own record, and it should be labelled as one. Never assume the bench sample and the production drum are the same lot, and never copy a bench result onto a drum certificate. ## What to settle before the first order The trade term, the pack, the lead time and the documents sit on the quotation. The quality side belongs next to it: which specification revision applies, a certificate with each lot, a retained sample, a retest period and the change-notification route. Settle that before the first production order rather than after the first argument. Replacement and return are governed by the quotation and the quality agreement. A disputed lot is settled on the retained jar by a joint re-test, never by a photograph. Agree in advance who commissions the referee test, and which laboratory both sides accept. Catalog data is published on the nervonic acid product page; the release lines are on the COA page; the market files sit on the compliance page; a definition of the term appears in the glossary; freight and paperwork are covered on the logistics page; the release file itself is described on the quality page. ### 05 The regulatory file for nervonic acid URL: https://nutrition.rainwoodbio.com/products/fatty-acids/nervonic-acid/compliance/ Reviewed: 2026-11-19 Nervonic acid is supplied as a free fatty acid, CAS 506-37-6, with a C24:1 minimum of ≥90.0% by GC. A specification tells a buyer what the powder is; it does not tell anyone whether that powder can be sold in a given market. The route, the limits and the label wording have to be worked out for the destination and the dose, and that work belongs to the buyer’s regulatory team. What follows is a checklist of the frameworks, the limits, the claims line and the documents to collect. In one lineA specification proves what the powder is; the regulatory file proves that this material can be sold where the buyer intends to sell it. ## What has to line up Four things have to line up before a file is complete. First, the material: which specification revision, which form, and which seed oil it was fractionated from. Second, the lot: what its certificate reports and which code it carries. Third, the market: the limits, the label and the route that apply where the product will be sold. Fourth, the change: what happens to the file when the source, the process or the pack itself moves. The certificate covers the second, the data sheet covers the first, and the safety data sheet covers handling; none of them settles the market question on its own. A high-purity fatty acid is not automatically the same regulatory object as the oil it was fractionated from. The enrichment step changes the composition, so a source oil that has a history of use does not by itself establish a route for a 90% free acid. The file should name the material as it is bought, not as the oil it came from, and every document in it should carry a version or a date. ## European Union In the EU, a food with no significant history of consumption before 15 May 1997 falls under the novel food framework, Regulation (EU) 2015/2283. The buyer’s regulatory team confirms whether the exact material needs an authorisation and whether it appears on the Union list; that question is about the material and the use level, not about the seed oil. Food supplements are otherwise governed by Directive 2002/46/EC, which harmonises vitamins and minerals, while substances outside that list remain a member-state competence. Contaminants fall under Commission Regulation (EU) 2023/915, labelling under Regulation (EU) 1169/2011 and claims under Regulation (EC) 1924/2006. Check the current consolidated text for each, as of this review. ## United States In the United States, the route is a dietary ingredient documented in use before 15 October 1994, or a notification for a new dietary ingredient filed under 21 CFR 190.6 at least 75 days before marketing; a food use is a separate question, usually answered through the GRAS route. The supplier can state which basis it holds and point to the supporting document. It is the buyer who decides whether that basis reaches the finished product and the wording on the pack. Labelling follows 21 CFR 101, and a structure or function claim carries the disclaimer required by 21 CFR 101.93. ## Great Britain and Northern Ireland Two regimes, not one. Great Britain runs its own novel food register and labelling rules, while Northern Ireland applies the EU framework. The buyer’s team records which one covers the destination, and that note stays with the order. ## Contaminants and the finished-product calculation Contaminants are judged on the supplement as eaten, so the arithmetic runs from the drum to the daily dose. The catalog limits below are release gates for the ingredient; the destination rules apply to the finished product. Ingredient limits to carry into the finished-product file | Parameter | Catalog limit | What the finished-product file needs | Lead (Pb) | ≤3 mg/kg | The lot result and the calculation to the daily dose | Arsenic (As) | ≤2 mg/kg | The method, the limit and the destination rule | Cadmium (Cd) | ≤1 mg/kg | The lot result, plus any exception that applies to the category | Mercury (Hg) | ≤0.1 mg/kg | The lot result and the method | Oxidation (PV, AV) | Agreed per order | The agreed limits and the results on the lot | C24:1 and cis/trans | ≥90.0%, profile reported | The GC result, the column and the isomer statement ## The claims boundary The page, the label and the sales material carry no disease-related claim. That includes the wording around memory, nerve tissue and myelin: nervonic acid is a normal component of the sphingolipids of nerve tissue, which is a compositional fact, but a label that uses the fact to imply a benefit is a health claim in the EU and a structure or function claim in the United States, and neither is available without the supporting authorisation or the notification route. Nervonic acid is also not an essential fatty acid. The body elongates oleic acid to C24:1, so an “essential fatty acid” line would be inaccurate as well as unavailable as a claim. The 90% figure is a specification, not a health claim, and the monounsaturated fat in the nutrition declaration refers to the food rather than to a permitted claim about this ingredient. ## Documents in the pack - A lot certificate that lists the method, the limit and the result for each line. - The data sheet, plus the revision of the specification that the order references. - A safety data sheet that names the storage condition and the melting range. - Allergen statement: if the lot came from macadamia, the source is a tree nut on the EU Annex II list, while the US major-allergen definition provides a refining exemption; the buyer applies the destination rule to the actual material. - Statements on GMO status, origin, residual solvent and the cis/trans ratio. - The fatty-acid profile, the acid value and the oxidation results for the lot. ## Checklist before the first order - The material, CAS number and free-acid form are named on every document. - The assay basis and the ester factor are written into the specification. - The buyer’s regulatory team has put the route decision in writing. - The source seed oil and the allergen statement match the lot. - Metal results have been recalculated to the daily dose. - The label wording and any claim have had a market review. - Change control covers the source, the process and the pack. The catalog gate is published on the product hub; the lot evidence is explained on the COA page; the analytical identity is on the identity page; the framework notes are in the EU, US and UK references; the release paperwork is described on the quality page. ### 06 How we prove a lot is nervonic acid URL: https://nutrition.rainwoodbio.com/products/fatty-acids/nervonic-acid/identity/ Reviewed: 2026-11-19 Four independent checks have to agree before a nervonic acid lot can be called the named material. The paperwork names the C24:1 acid and its CAS number; the chromatogram carries a main peak at the C24:1 retention with the right neighbours; the acid value reads like a free acid rather than an ester; and the mass balance closes against the moisture figure. An assay on its own cannot tell chain length, configuration or an esterified dilution apart. In one lineIdentity is four agreeing measurements: the peak says C24:1, the neighbours say the fraction, the acid value says free acid, and the balance says nothing was added. ## Four questions, four kinds of evidence A certificate can show the right name and still prove nothing. The four layers below are separate questions, each needing its own evidence, and a supplier who answers only the first of them has described paperwork rather than powder. Four layers of nervonic acid identity | Layer | What it asks | Evidence | What it establishes | Document | Are the acid and the chain named? | Name, CAS 506-37-6, formula, source | Paperwork only | Chromatogram | Is the main peak C24:1? | GC-FID retention and GC-MS confirmation | The chain length and the configuration claimed | Acid value | Is it a free acid? | Titration, mg KOH/g | Free acid against ester or glyceride | Mass balance | Is anything else in the drum? | Assay, moisture, ash and acid value together | That the numbers describe one material ## The ratios that name the material On a long polar column the methyl ester of C24:1 elutes just before C24:0, with C22:1 well before both. That order makes the ratios more revealing than the headline figure. The C24:1 to C24:0 ratio says how hard the enrichment cut was run, and a falling ratio points to a saturated fraction rather than to a synthesis error. The C22:1 peak says whether the starting oil was carried through the cut. The acid value is the second ratio. The calculated value for pure nervonic acid is about 153 mg KOH/g, and a 90% free acid with a neutral balance should read near 138. A lot that reports 90% by GC and an acid value near 153 is a mixture of free acids; a lot that reports 90% and an acid value near 138 has roughly a tenth of its mass as glyceride or ester. Both can be legitimate purchases, and only the acid value says which one is in the drum. The third check is the moisture. Loss on drying is limited at ≤1.0%, so the as-is and dried assays sit close together, but a lot that reports an assay without a moisture figure has left a small gap in the balance. A high loss on drying with a normal anhydrous assay is a wet powder, not a concentrated one. ## X-ray diffraction: what it can and cannot show A long-chain fatty acid is crystalline at room temperature, so the powder diffracts. The pattern is dominated by the chain packing, and the long spacings of C24:0 and C24:1 are almost the same. That means XRD can show that the material is crystalline and can compare the solid form of two lots, but it cannot prove the chain length or the cis double bond. It also cannot replace GC for the assay. What XRD does well is the dilution question: a powder cut with silica or maltodextrin shows an amorphous halo alongside the acid reflections, and a lot that has been melted and re-solidified can show a different reflection set from the reference. A “conforms” statement that arrives without the pattern and the detection limit is worth little. For a solid-state question the melting range of 42–44 °C is usually the simpler screen. ## What adulteration looks like Substitution routes for nervonic acid and the signal for each | Route | What it does | Signal | Test | Other monounsaturate | Oleic or erucic acid replaces C24:1 | Extra C18:1 or C22:1 peak; C24:1 share falls | Full GC profile | Saturated C24:0 cut | Raises the melting range; lowers the C24:1 ratio | Melting point above 44 °C; ratio down | GC plus melting point | Esterified material | Ethyl ester or glyceride passes an assay | Acid value below 138 at a 90% assay | Acid value, saponification value | Carrier dilution | Silica or maltodextrin adds mass | Assay low; ash or XRD halo | Mass balance, ash, XRD | Oxidised material | Double bond attacked; colour and odour | PV and anisidine up; yellowing | PV, anisidine, appearance The first route is the most likely one, because oleic and erucic acids are widely available and liquid, and neither would be visible in an appearance check. GC separates them by a wide margin, so a full profile catches it. The quiet route is the second: a saturated cut keeps the white waxy appearance and can pass a loose melting range. Names cause their own confusion. Selacholeic acid is a synonym for nervonic acid, “nervon” is a cerebroside rather than the acid, and trans-15-tetracosenoic acid is the same chain length with a different configuration. A certificate that uses one of those names without the CAS number is describing something the buyer has to check. ## How to write identity into the specification - “Nervonic acid (cis-15-tetracosenoic acid), CAS 506-37-6, C24H46O2, free acid.” - “C24:1 ≥90.0% by GC-FID; the column, the standard and the ester factor stated.” - “C24:0 and C22:1 reported; limits agreed for each.” - “Acid value reported in mg KOH/g and consistent with the free acid at the declared assay.” - “Melting point 42–44 °C; loss on drying ≤1.0%.” - “No carrier, and no ester above the agreed limit.” ## Five questions for the supplier - Which peak on the chromatogram is C24:1, and what column and standard produced it? - What are the C24:0 and C22:1 figures on this lot, and what limits apply? - What is the acid value, and does it match a free acid at this assay? - What moisture figure was recorded, and was the assay taken as received or after drying? - If we disagree about a result, will you re-test the retained sample jointly? Five answers of that kind build an identity file. One percentage does not. Catalog data is published on the product hub; the reporting format is on the COA page; the chain-length comparison is on the nervonic versus oleic page; the profile-as-fingerprint approach is shown on the flaxseed oil powder identity page; the diffraction method is described in the XRD method note. ### 01 What a perilla seed oil COA reports, line by line URL: https://nutrition.rainwoodbio.com/products/fatty-acids/perilla-seed-oil/coa/ Reviewed: 2026-11-19 A perilla seed oil certificate reports the fatty-acid profile by GC — alpha-linolenic, linoleic and oleic acid — beside free fatty acid, peroxide value, moisture, heavy metals and microbiology. Each line needs a method and a release limit, with the result in its own column. The catalog range is the gate; the batch COA records what one lot measured. In one lineThe ALA figure only means something beside the free fatty acid and the peroxide value, because a lot can clear one line and fail another. ## Reading the certificate line by line An auditable line says what was measured, by which method, and against which limit. Without the method the result cannot be repeated elsewhere; without the limit it cannot show what the lot passed. For an oil the identity line is the fatty-acid profile, so the chromatogram matters as much as the percentage. Identity, oxidation and release limits · cold-pressed perilla seed oil | Parameter | Method | Release limit | Alpha-linolenic acid (C18:3 n-3) | GC-FID of fatty-acid methyl esters | 55.0–65.0% of total fatty acids | Linoleic acid (C18:2 n-6) | Same GC run | 12.0–20.0% | Oleic acid (C18:1 n-9) | Same GC run | 12.0–20.0% | Free fatty acid | Titration as oleic acid | ≤0.50% | Peroxide value | Iodometric titration | ≤5.0 meq O2/kg | Moisture | Karl Fischer | ≤0.1% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent The percentages are normalised to total fatty acids, not to the weight of the oil, and the free fatty acid is expressed as oleic acid. A certificate that omits either basis has described a material it did not measure. ## The basis behind the ALA figure GC separates the methyl esters and reports each acid as a share of the total. That is not the same as grams of ALA per 100 g of oil, because the glycerol backbone and the unsaponifiable fraction sit outside the normalised figure. For a pure oil the gap is roughly four percent, so a 60.0% share is about 57 g per 100 g of oil. Both numbers can be correct, and the certificate should state its basis. FFA measures hydrolysis — the splitting of the triglyceride into glycerol and free acids — and rises with seed damage, moisture and careless pressing. PV measures the hydroperoxides formed by oxidation, and rises with heat, light, oxygen and trace metals. A refined lot can have low FFA and a PV near the limit; a fresh press can have a clean PV and high FFA. One number cannot stand in for the other. Acid value and FFA share the chemistry: 0.50% as oleic acid is about 1.0 mg KOH/g, so a certificate may report either if the conversion is shown. Moisture at ≤0.1% is measured by Karl Fischer, because an oil does not release its water at 105 °C like a powder. ## Release limit, batch result and the two oxidation numbers The release limit is the gate; the batch result is the measurement. Keep the two in separate columns. A result column that repeats the range is not evidence; it is the gate copied out. The useful set is the full profile rather than the ALA line alone, because the other acids make the profile a fingerprint. What the result column should hold | Parameter | Release limit | Result column | ALA | 55.0–65.0% | A measured percentage, with the GC method and the chromatogram | Free fatty acid | ≤0.50% | A measured percentage as oleic acid, or the acid value with the conversion | Peroxide value | ≤5.0 meq O2/kg | A measured figure, with the method and the test date Ask for the p-anisidine value even though this catalog does not set one. PV falls as hydroperoxides decompose while p-AV rises with the aldehydes that follow, so a lot can sit inside the PV limit and still be moving the wrong way. A PV of 4.8 with a high p-AV is a different oil from the same PV with a low one. ## What varies from lot to lot The seed moves the profile. Cultivar, latitude, harvest year and ripeness shift the ALA share, and a warm season can move it by several points. A supplier who quotes one fixed ALA figure is quoting a typical value, not a limit. Pressing moves the FFA and the colour. A cold press leaves phospholipids, waxes and pigments in the oil, so the lot can be hazier and deeper in colour, with more FFA. Refining removes the free acids and pigments and part of the tocopherols: FFA falls and the colour lightens, but the oil loses some of its own protection. Storage moves the PV. An oil can leave the press clean and arrive with a higher PV if the drum sat warm or the bottle stood in light. Colour and odour are the first signals: an oil gone duller, or smelling of paint rather than green seed, points to oxidation before the PV confirms it. ## When to send a sample outside Commission an independent test when the source is new, the destination is regulated, a release is disputed, or the ALA sits at the edge of the range. The panel is not a copy of the certificate: GC-FID with the chromatogram, FFA by titration, PV and p-AV by named methods, ICP-MS for the metals, and a sterol and tocopherol profile when the source is in question. Every “not detected” entry is only as strong as the detection limit behind it; without that figure, the line describes the method rather than the sample. The sample tested should be the one retained, and the report should name the lot. ## Six lines that separate two quotations Six lines that separate two perilla seed oil quotations with the same ALA figure | Line | What to ask for | What it separates | Grade | Cold-pressed or refined, stated on the specification | Same name, different process | Profile | All named acids from one GC run | A profile from an ALA-only report | FFA | Result as oleic acid, or acid value with conversion | A fresh press from a hydrolysed oil | Oxidation | PV and p-AV, methods and dates | A fresh oil from an aged one | Antioxidant | None added, or the name and level declared | A declared oil from an unknown one | Lot trace | Lot code quoted on COA, pack and retained sample | A genuine lot from a copied certificate Two quotations that agree on ALA and differ elsewhere are not describing the same oil. The catalog specification sits on the perilla seed oil product page; the grade question is on the grade page, the oxidation behaviour on the stability page, and the tests that separate the oil from a blend on the identity page. The analytical methods index describes the GC, titration and ICP-MS work, and the quality page sets out the release file. The other ALA oil in the range, as a 50% powder, is on the flaxseed oil powder page. ### 02 Cold-pressed or refined perilla seed oil: choosing a grade URL: https://nutrition.rainwoodbio.com/products/fatty-acids/perilla-seed-oil/grades/ Reviewed: 2026-11-19 Perilla seed oil is sold cold-pressed, refined, or as a powder on a carrier. The two oils can sit inside the same ALA window, while the powder reports ALA on the powder; all three differ in free fatty acid, peroxide value, colour, clarity, flavour and shelf life. The grade is part of the specification, not a word in front of the same oil. In one lineThe grade is a processing decision: it moves the free fatty acid, the peroxide value, the colour and the minor fraction, while the ALA window barely moves. ## Why the grade changes the oil Cold-pressed oil is obtained by pressing and filtration, under a temperature ceiling the producer states. The process leaves phospholipids, waxes, pigments and tocopherols in the oil, which is why a cold-pressed lot can be hazy, deeply coloured and full-flavoured. Refining adds degumming, neutralisation, bleaching and deodorisation. Those steps remove free fatty acids, pigments and odours, and they also remove part of the minor fraction that protects the oil. The fatty-acid profile barely moves. ALA, linoleic and oleic acid sit in the same ranges before and after refining, because the steps do not saturate or isomerise the chain under normal conditions. What moves is the FFA, the PV at release, the colour and the flavour. A buyer who compares the two oil grades on ALA alone has compared the line least likely to differ. ## Three grades compared Cold-pressed, refined and powder-on-carrier perilla oil | Grade | Process | FFA and PV | Colour and flavour | Typical use | Cold-pressed | Pressed and filtered; no solvent | ≤0.50% FFA; PV ≤5.0 | Golden, green-grassy, full | Softgels and oil blends where the flavour is part of the product | Refined | Degummed, neutralised, bleached, deodorised | FFA lower than a cold press; PV controlled at release | Pale, mild, neutral | Capsules and neutral blends with a long ambient shelf life | Powder on carrier | Oil dispersed in a declared carrier | Measured on the extracted oil | Free-flowing, colour from the carrier | Stick packs, capsules and blends that need a dry form “Cold-pressed” describes a process, not a composition. The word does not set an FFA limit, a colour or a peroxide value, so the specification still has to carry the numbers. A refined oil sold under a cold-pressed name is a grade substitution even when the ALA result is inside the range. The standard grade in this catalog is cold-pressed; refined is a separate specification with its own limits and should be quoted as such. ## What the oil is like to handle The oil is a liquid at room temperature and pours easily. Its density is below that of water, so a 1 kg bottle holds a little over a litre. Cold storage can produce a haze or a soft solid fraction as waxes and the more saturated triglycerides crystallise; that is reversible on warming and is not a defect in itself. A lot that stays cloudy at room temperature is a different question and should be checked against the clarity line. Light and oxygen are the handling variables. An amber bottle is a light barrier and a clear one is not; a drum should stay closed, dark and off a warm floor. A nitrogen blanket can be requested for a long storage period. A pump that recirculates air through the drum adds oxygen on every draw, and a half-empty drum is a larger headspace than a full one. ## The arithmetic behind a label At the catalog midpoint the oil is 60% ALA, so one gram delivers about 600 mg. A 500 mg softgel carries about 300 mg of ALA; a 1,000 mg softgel about 600 mg. These are arithmetic on the specification, not a result for a lot, and the batch COA is what confirms a particular fill. The powder is a different calculation. The ALA figure on a powder is expressed on the powder, and the oil load is the multiplier that connects it to the oil. If a powder carries 50% oil at 60% ALA, the powder is 30% ALA; a 500 mg capsule of it delivers about 150 mg, not 300 mg. Ask which basis the figure uses before comparing a powder with an oil. ## What the grade clause should say - “Perilla frutescens seed oil, cold-pressed and filtered; country of origin declared.” - “ALA 55.0–65.0% of total fatty acids by GC; linoleic and oleic 12.0–20.0% each.” - “Free fatty acid ≤0.50% as oleic acid; peroxide value ≤5.0 meq O2/kg.” - “Moisture ≤0.1%; appearance clear to slightly hazy, light yellow to golden.” - “Antioxidant: none added, or the name and level declared.” - “Pack: 1 kg amber bottle or 25 kg HDPE drum; nitrogen blanket on request.” - “Destination market and grade confirmed before the order.” ## When a grade is the wrong choice Cold-pressed is the wrong choice when the customer expects a neutral taste, when the capsule has to sit on a warm shelf for two years, or when the colour has to be consistent from lot to lot. Refined is the wrong choice when the cold-pressed character is the reason for the product, or when the label names a cold-pressed oil and the specification allows a refined one. The powder is the wrong choice when the dose needs a small capsule or when the carrier is not acceptable on the label. Name the grade in the purchase order rather than inferring it from the colour or the flavour. The catalog specification is on the perilla seed oil product page. The COA page shows where the grade appears on the certificate, and the stability page explains what the choice does to shelf life. The powder form of the other ALA oil is on the flaxseed oil powder page. The methods index covers the GC and titration work, and the quality page describes the release file. ### 02.1 Perilla seed oil vs flaxseed oil: two ALA oils compared URL: https://nutrition.rainwoodbio.com/products/fatty-acids/perilla-seed-oil/grades/perilla-oil-vs-flaxseed-oil/ Reviewed: 2026-11-19 Perilla seed oil and flaxseed oil are both pressed from seeds and both carry alpha-linolenic acid as their main fatty acid, so they look interchangeable on a specification sheet. They differ in the ALA share per gram, in the minor fraction, in the forms each is sold in, and in the oxidation margin the formula has to allow. The choice is usually made by the label and the dose form before it is made by the oil. In one lineBoth oils are ALA-first, so the choice turns on the ALA share per gram, the oxidation margin, the grade and the form the formula needs. ## Two oils with the same main fatty acid Perilla oil comes from the seed of Perilla frutescens, a plant in the mint family; flaxseed oil comes from Linum usitatissimum. Both are ALA-first. Perilla is specified here at 55.0–65.0% ALA, and flaxseed oil commonly sits in the 45–65% band, with the 50% microencapsulated powder in this range standardised at ≥22.5% ALA on the powder. Linoleic and oleic acid follow in both, at 12.0–20.0% each for perilla, and flaxseed's linoleic and oleic bands overlap those figures. Perilla seed oil and flaxseed oil side by side | Property | Perilla seed oil | Flaxseed oil | Botanical source | Perilla frutescens, seed | Linum usitatissimum, seed | ALA | 55.0–65.0% | About 45–65% in the oil; ≥22.5% on the 50% powder | Linoleic and oleic acid | 12.0–20.0% each | Overlapping bands; declared on the lot COA | Free fatty acid | ≤0.50% as oleic acid | Declared on the oil's own COA | Peroxide value | ≤5.0 meq O2/kg | ≤5.0 meq/kg on the extracted oil | Form in this range | Oil; powder on carrier on request | 50% microencapsulated powder | Flavour | Green, grassy, distinctive | Mild, nutty when fresh The fatty-acid difference is smaller than the marketing suggests. What separates them in practice is the form and the minor fraction: the tocopherols, the sterols and the pigments that come with the pressing route, and that a refinery or a spray drier changes. ## ALA per gram and per capsule At 60% ALA, a gram of perilla oil carries 600 mg. At 53% ALA, a gram of flaxseed oil carries about 530 mg, roughly a tenth less for the same weight. The gap is modest per gram and grows when the form changes. A 500 mg softgel of perilla oil carries about 300 mg of ALA. A 500 mg capsule of the 50% flaxseed powder carries 250 mg of oil and roughly 112 mg of ALA at the 45% oil minimum, because the powder's ALA is the oil's ALA scaled by the oil load. The label arithmetic follows the declaration. To declare 300 mg of ALA, the perilla oil needs about 500 mg at 60%, and the flaxseed powder needs about 1.33 g at 22.5%. Those are arithmetic on the specification, not a result for a lot. A formulator who compares the two oils per gram, and then compares a powder with an oil per gram, has changed the basis twice without noticing. ## The oxidation margin Both oils are highly unsaturated and both carry a peroxide limit of 5.0 meq O2/kg, but perilla's higher ALA floor leaves a little less room. ALA has three double bonds and two bis-allylic methylene groups, and those are where autoxidation starts; an oil with more ALA reacts faster at the same temperature and light exposure. The practical difference shows up in the pack and the retest period rather than in the release limit: perilla oil may need a smaller pack, a nitrogen flush or a shorter interval to stay inside the same PV. Flaxseed's powder form puts a wall between the oil and the air, which slows the reaction without stopping it. The peroxide value is measured on the extracted oil, so the wall buys time rather than immunity. The powder specification also sets a p-anisidine limit; the perilla oil catalog does not set one, so ask for p-AV on the oil when the shelf life is long. Neither oil should be given the other's stability data. ## Oil, powder and what the formula can take Perilla oil is supplied as an oil, with a powder on carrier on request. Flaxseed is supplied here as a 50% microencapsulated powder, so its oil figure is derived from the load. That difference decides more formulas than the fatty-acid numbers. A stick pack or a drink mix needs a powder that disperses; a softgel needs an oil; a capsule can take either, but the fill weight changes with the ALA share and the oil load. An oil blend can carry both, and then the label declares both sources. Blending also dilutes the minor fraction of each oil, which changes the flavour and the natural tocopherol level. A blend is a new specification, not a way to average two certificates. ## What has to appear on the label Both oils are declared by source in the ingredient list, and the ALA amount is declared per serving in the nutrition or supplement panel. The EU and GB registers carry an entry for ALA with its own condition of use, and the brand's reviewer confirms the wording and the daily amount. Perilla and flax are not on the EU Annex II allergen list or the US major-allergen list as of this review, so the oil itself does not trigger a declaration; the carrier, the blend and the finished product still need their own assessment. A vegetarian or vegan claim follows the source, and both oils are plant-derived. A cold-pressed claim follows the process: perilla is supplied cold-pressed, while the flaxseed product here is a powder, so the two do not carry the same process wording. ## Matching the oil to the formula Choose perilla oil when the label wants a higher ALA share per gram, when the source is part of the product story, or when a softgel or an oil blend is the dose form. Choose flaxseed when the formula needs a dispersible powder, when the 50% oil load fits the capsule or the stick, or when an established powder supply matters more than the last few points of ALA. Choose neither when the label declares EPA or DHA; these are ALA oils, and the declaration has to match. The catalog specification is on the perilla seed oil product page, and the grade and oxidation pages carry the rest of the perilla file. The flaxseed comparison continues on the flaxseed oil powder page. The methods index describes the GC and oxidation tests, the quality page the release workflow, and the grade page the cold-pressed and refined routes. ### 03 Perilla seed oil stability: oxidation, pack and shelf life URL: https://nutrition.rainwoodbio.com/products/fatty-acids/perilla-seed-oil/stability/ Reviewed: 2026-11-19 Perilla seed oil is an ALA-rich oil whose main fatty acid carries three double bonds, and it oxidises faster than an oil built on oleic or linoleic acid. Oxygen, light, heat and trace metals drive the reaction, and the pack and storage condition decide how long the oil stays inside its peroxide and free fatty acid limits. There is no single shelf life without those two facts. In one lineALA carries three double bonds, so oxygen, light and heat set the shelf life before any other line of the specification does. ## The oil in the sealed pack An unopened pack holds a fixed amount of oxygen in the headspace and takes in a slow trickle through the closure. ALA reacts with that oxygen even in the dark, so the peroxide value climbs from the day of filling. The rate depends on temperature and headspace: a drum filled with nitrogen starts lower and rises more slowly than one filled with air, and a bottle with a large headspace starts with more oxygen than a full one. An amber bottle is a light barrier; a clear bottle and an HDPE drum are not. HDPE is a good moisture barrier and a modest oxygen barrier, so a 25 kg drum is a sound shipping pack and a weaker long-term store than a lined, nitrogen-flushed one. Keep the drum closed, keep it off a warm floor, and record the date of opening. Moisture is specified at ≤0.1% and stays low in a closed pack. It matters less as a direct reactant than as a condition for hydrolysis: water in the oil lets free fatty acids grow, and in an emulsion it can support microbial growth at the interface. That is one reason the moisture line sits beside the FFA line on the certificate. ## Once the oil is in a formula An oil is not water-soluble, so the “solution” question is really the finished formula: a softgel fill, an oil blend, an emulsion or a powder. Each one changes the exposure. A softgel seals the oil in a shell and limits oxygen, but the shell can lose moisture and the fill can migrate into it. An oil blend dilutes the perilla oil with another oil and changes the balance of pro-oxidants to antioxidants. An emulsion puts the oil in contact with water, oxygen and often metal ions at an interface, which is the harshest of them. Heat is the process variable. A softgel drying step is warm, a deodorisation step is hotter, and a hot-fill beverage exposes an emulsion to heat after the oil has been dispersed. The bulk stability of the oil describes none of those steps. If the formula is an emulsion or a beverage, the stability work has to be repeated in the matrix. ## What speeds the reaction Factors that move perilla seed oil during storage | Factor | What it does | Control | Oxygen | Forms hydroperoxides at the bis-allylic carbons | Low headspace; nitrogen flush; sealed pack | Light | Speeds oxidation, especially with chlorophyll traces | Amber bottle; opaque drum; dark store | Heat | Raises the rate of every oxidation step | Cool store; controlled process temperature | Trace metals | Iron and copper catalyse hydroperoxide breakdown | Stainless contact; avoid copper and iron fittings | Antioxidants | Tocopherols slow the chain; refining removes some | Declare any added antioxidant; keep the natural fraction | Water | Supports hydrolysis and, in emulsions, microbial growth | Moisture ≤0.1%; dry store; sealed pack These factors are not independent. A warm, bright store with a half-empty drum combines three of them, and an emulsion at neutral pH in clear glass combines all six. The question is not whether the oil is stable on its own, but how long it stays inside the limits in a named pack and a named store. ## A protocol that tests the pack Long-term 25 °C/60% RH, intermediate 30 °C/65% RH and accelerated 40 °C/75% RH cover the warehouse. Add a light-exposure arm, because a dark incubator misses the failure mode that a shop window creates. Test PV, p-AV, FFA, the fatty-acid profile, appearance and tocopherols at each point; p-AV is not on the catalog, but it is the second half of the oxidation story. The report should show individual results and test dates, not a pass statement. A PV that rises from 0.8 to 4.9 over the study is inside the limit at every point and is still a warning, because the next point may cross it. Read the trend rather than the last number, and ask for the data on the pack you will buy. ## What the formula adds A softgel brings the shell, the fill weight and the drying step; check the fill's PV after drying, not only the oil as received. An oil blend brings the other oil's own PV and its tocopherol level, and a refined carrier with no tocopherols can dilute the protection. An emulsion brings pH, dissolved oxygen, homogenisation heat and metal ions; a chelator such as EDTA may be allowed in one market and not another, so the additive rules and the label both apply. A powder brings the carrier's water activity, the surface oil and the antioxidant in the matrix. An overage is a label and stability decision. It cannot rescue a pack that lets oxygen through, and it does not replace a retest period measured on the real pack. ## Fixing the retest period A retest period is a property of a pack and a storage condition; the stability file for that exact pack is what supports it. A bulk drum and a 1 kg bottle have different headspace-to-oil ratios and different opening histories, so a number measured on one is not evidence for the other. After the retest period, re-test the retained sample before extending use. Standard packs are listed on the perilla seed oil product page. Release tests are set out on the COA page, the pressing choice on the grade page, and pack and lead time on the MOQ page. The methods index covers the oxidation and GC work, the quality page the release workflow, and the flaxseed oil powder page the other ALA oil in its powder form. ### 04 Perilla seed oil: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/fatty-acids/perilla-seed-oil/moq/ Reviewed: 2026-11-19 Perilla seed oil starts at 1 kg in an amber bottle, moves to a 25 kg HDPE drum for production, and ships in 1–7 days on the standard pack. An order is only firm once the grade, the specification, the destination and the documents are named; the first two decide which oil is being bought, the last two where it can go. In one lineThe 1 kg pack is the qualification unit: large enough to test and retain, small enough to ship before the production plan is fixed. ## Where the 1 kg minimum comes from A 1 kg bottle is enough for a bench trial, a retained sample and an independent test, and it travels as a parcel rather than a pallet. It is also the smallest unit that leaves the filling line with its own lot code instead of being decanted from a drum. The reason is traceability rather than the volume of oil: a split from a larger lot adds handling and breaks the link between the certificate and the pack. The 25 kg drum is the production unit. It cuts handling and packaging per kilogram, but it commits storage space and a longer time between opening and the last draw. Size the order on the rate of use, not on the pack that lowers the handling per kilogram; oil that sits in a half-empty drum for a year is not the oil that was released. ## Packs and pack sizes Standard perilla seed oil packs | Pack | Net weight | Typical use | Notes | Amber bottle | 1 kg | Trial, sample, small batch | Light barrier; reseal after opening | HDPE drum | 25 kg | Production | Store dark; record the opening date | Powder on carrier | On request | Stick packs, capsules | Oil load and ALA declared on the powder The catalog pack is the oil. A powder on carrier is a different specification with its own COA, not a packing choice on the same product. If the dosage form needs a dry ingredient, say so before the quotation. ## From order to dispatch The standard pack is quoted at 1–7 days from order confirmation. That covers picking, the documents and dispatch; it does not include freight transit, customs clearance or the customer's own quality release. A powder on carrier or a non-standard pack takes longer, and the added time belongs on the quotation. Request the dispatch date as well as the lead time. A drum travels on a pallet and a bottle as a parcel; under the Incoterm, one side books the freight and the other clears the entry. Documents should arrive with the lot, not in a later email. ## What makes a quotation firm A quotation is firm enough to compare when it carries six things: - Product and grade. Perilla frutescens seed oil, cold-pressed or refined, named on the line. - Specification. The ALA window, FFA, PV, moisture and the contaminant panel, at a stated revision. - Quantity and pack. Bottle, drum or powder on carrier, with the quantity. - Destination and Incoterm. The delivery country, the port or address, and the trade term. - Documents. Lot COA, specification, SDS and any statement the importer has to file. - Intended use and market. Supplement, food or another use, and the country of sale. A quotation without the grade and the market is incomplete: cold-pressed and refined are different purchase orders even when both are called perilla oil, and the same lot can be acceptable in one destination and outside the file in another. The commercial terms are set out in the offer, not here. ## A sample that cannot be traced is a demonstration The 1 kg bottle is the qualification sample. Test the profile, FFA, PV and moisture before scaling, and keep a retained sample from the same bottle. The lot code on the sample, the COA and the quotation should match. A sample without that link is only a demonstration. If a trial needs less than a kilogram, ask before ordering. A split is a repack with its own traceability, not the catalog pack, and the bench sample and the production drum may not come from the same lot. ## What to agree before ordering The quotation carries the commercial terms, the Incoterm, the pack, the lead time and the documents. Set the quality terms beside them: the specification revision, a COA per lot, the retained sample, the retest period, the antioxidant declaration and the route for a change. Signing the quality agreement before the first production order is easier than arguing after it. Returns follow the quotation and the quality agreement. A failed lot is settled on the retained sample and a joint re-test, not on a photograph of the oil. Agree in advance which laboratory both sides accept and how a disputed result will be handled. The catalog specification is on the perilla seed oil product page. Release tests are listed on the COA page, the pack and retest period on the stability page, and the market files on the compliance page. The methods index describes the tests, the quality page the release workflow, and the flaxseed oil powder page the powder form of the other ALA oil. ### 05 The regulatory file for perilla seed oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/perilla-seed-oil/compliance/ Reviewed: 2026-11-19 Perilla seed oil is sold as a food oil and as a supplement ingredient, so the regulatory file is built from the material, the destination and the finished product. The specification, the contaminant results, the allergen and GMO statements and the label review are separate items, and the buyer's regulatory team confirms the route for the market where the product will be sold. This page lists what belongs in that file; it does not assert a novel-food, NDI or permitted-ingredient status for any market. In one linePerilla oil is a food ingredient; the file has to match the destination, with the specification, the contaminants and the label, and the buyer confirms the route. ## What belongs in the file The file is built to answer four practical questions, in this order: what the material is and which version of the specification is being bought; which lot is in the drum and what its certificate measured; which limits and label rules the destination applies to the finished product; and what changes if the seed source, the pressing route or the pack changes. The certificate covers the lot, the technical data sheet covers the specification, and the safety data sheet covers handling. The route question needs a fourth document: the destination's own rule, plus the buyer's confirmation that this material fits it. For an oil the file is short on chemistry and long on provenance: botanical name and plant part, country of harvest or pressing, cold-pressed or refined route, antioxidant declaration, packaging and liner, fatty-acid profile, oxidation values, contaminants, microbiology, and the allergen and GMO statements. A dated document list is worth more than a folder of undated files. ## European Union General food law (Regulation (EC) No 178/2002) applies, with the food information rules (Regulation (EU) No 1169/2011), the contaminant regulation (Regulation (EU) 2023/915) and, for supplements, Directive 2002/46/EC. The novel-food catalogue under Regulation (EU) 2015/2283 is where the status of a plant oil is recorded, and a buyer should check the entry for the exact species and the exact use before the first order. This review does not assert that status; the destination member state and the buyer's regulatory team confirm it from the current text. The oil's own file supports that check. The botanical name, the part used, the process and the history of use are the facts a reviewer needs, and a certificate that carries only a trade name does not supply them. ## United States A dietary ingredient is marketed under the FD&C Act as amended by DSHEA, and a supplement is made under the current good manufacturing practice rules in 21 CFR 111. The Supplement Facts panel declares the ingredient and the amount per serving, and the source is named in the ingredient statement. A supplier should be able to describe the basis behind the ingredient — a history of use, a GRAS position or another route — and point to the document; the buyer confirms that it covers the finished product. Perilla is not on the US major-allergen list as of this review, and an oil is not a protein-rich ingredient, but the carrier, the blend and the finished product still need their own allergen assessment. A structure/function statement, if used, is the brand's responsibility and carries the required disclaimer; it is not a disease claim. ## United Kingdom Great Britain works from retained food law and the GB nutrition and health claims register. Northern Ireland stays with the EU framework. A GB-compliant label is not automatically accepted in Northern Ireland, and the register conditions can diverge, so the destination decides which file is assembled. The buyer's team confirms it and keeps the evidence with the order. ## Contaminants and oxidation limits The catalog limits are ingredient limits. The destination rules apply to the food as sold, and a supplement is eaten in a small daily dose, so the calculation from the oil to the capsule is part of the file. The table lists the catalog figures and what each one needs before the file is complete. Catalog limits and the finished-product calculation | Parameter | Catalog limit | What the file must show | Lead (Pb) | ≤3 mg/kg | Lot result, method and the dose calculation for the capsule | Cadmium (Cd) | ≤1 mg/kg | Lot result and the category that applies in the destination | Mercury (Hg) | ≤0.1 mg/kg | Lot result and method | Arsenic (As) | ≤2 mg/kg | The agreed limit and the method, stated on the certificate | Oxidation | FFA ≤0.50%; PV ≤5.0 meq O2/kg | Result at release and the margin left at the end of the retest period Oxidation is not a contaminant, but it belongs in the same review: a high PV is a quality failure and can be a reason for rejection at the border. The release result and the stability margin are different numbers, and the file should show both. ## Claims and label wording Perilla oil is bought for its ALA, and ALA is a nutrient with an entry in the EU and GB claims registers, each with its own condition of use. The brand's reviewer confirms that the wording, the daily amount and the finished product meet that condition; a supplier's certificate does not authorise a claim. The rule also runs the other way: a claim does not change the specification. No disease, therapeutic or curative wording belongs on the label or in the file. A structure/function statement in the US needs the disclaimer and the brand's substantiation. “Omega-3” is a family name, so if the label uses it, the declaration has to say which fatty acids and how much. ## Documents to keep on file - Specification with the grade, the ALA range and the oxidation limits, version-controlled. - COA for the lot, with methods, results and a reference to the chromatogram. - Technical data sheet and safety data sheet. - Allergen statement, including the carrier or the blend. - GMO statement and origin statement, naming the country of harvest or pressing. - Residual-solvent statement if the oil is solvent-extracted. - Antioxidant declaration: none added, or the name and level. - Packaging statement, including the liner and any nitrogen flush. ## Checks before ordering - The specification names the botanical source, the plant part and the grade. - The specification revision and the lot COA agree, and the lot code is on the pack. - Each contaminant result has been recalculated for the daily dose. - The destination route is confirmed, including the novel-food catalogue check. - The label wording and any claim have been reviewed for that market. - Seed source, process and pack sit under a change-control agreement. The catalog specification is on the perilla seed oil product page; the lot certificate is explained on the COA page, the grade on the grade page, and the analytical evidence on the identity page. The quality page describes the release file, the methods index the tests, and the flaxseed oil powder page the other ALA oil in the range. ### 06 How we prove a perilla seed oil lot is perilla oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/perilla-seed-oil/identity/ Reviewed: 2026-11-19 A perilla seed oil lot is identified by its full fatty-acid profile — ALA, linoleic and oleic acid inside the catalog ranges — together with its sterol and tocopherol fractions, its source records and its oxidation values. One ALA percentage cannot do it, because flaxseed oil and a blend can sit in the same window. The identity file has to show the pattern, not one peak. In one lineIdentity is the whole fatty-acid profile plus the minor fractions, because one ALA number can be reached by more than one seed oil. ## Four layers of evidence A certificate can name the right species and still not prove the oil. The four layers below answer different questions, and each one needs its own result. A supplier who answers only the first has sent paperwork, not a sample. Four layers of perilla seed oil identity | Layer | Question | Evidence | What it proves | Document | Is the species, part and grade named? | Botanical name, origin, process statement | Paperwork only | Chromatography | Is the oil ALA-dominant with the right balance? | GC-FID of the fatty-acid methyl esters | The profile, not the source | Minor fractions | Do the sterols and tocopherols fit the oil? | GC of the sterols; HPLC of the tocopherols | A whole oil rather than a blend | Mass balance | Is it fresh and undiluted? | FFA, PV, p-AV, moisture | Consistency of the numbers ## The profile and the ratios around ALA The catalog ranges are ALA 55.0–65.0%, linoleic 12.0–20.0% and oleic 12.0–20.0%. At the midpoints the oil is roughly 60:16:16, with ALA about 3.8 times linoleic acid and 3.8 times oleic acid. The ratios are a consistency check, not a provenance test: they catch an oil diluted with sunflower or a high-oleic carrier, and they do not separate perilla from flaxseed, whose profile is close. The rest of the oil is the saturated fraction and the unsaponifiable matter. Palmitic and stearic acid account for most of the saturated part, and the sterols and tocopherols sit in the unsaponifiable fraction. A GC report that lists only ALA has not described the oil; the full table of peaks is what makes the profile a fingerprint. What a deviation in each part of the profile suggests | Part of the profile | Catalog range | A deviation suggests | ALA (C18:3 n-3) | 55.0–65.0% | Dilution with a low-ALA oil | Linoleic acid (C18:2 n-6) | 12.0–20.0% | A soybean or sunflower addition | Oleic acid (C18:1 n-9) | 12.0–20.0% | A high-oleic carrier | Saturated fraction | Balance of the profile | A partly hydrogenated or fractionated oil | Sterols and tocopherols | Reported separately | A stripped, refined or blended oil ## What XRD can and cannot do here XRD reads a crystal lattice, and perilla seed oil is a liquid at room temperature, so there is no lattice to read. The method belongs to the solid ingredients in the catalog, not to the oils. A certificate that offers “XRD conforms” for an oil has either tested the wrong material or used the word loosely. What applies instead is the chromatographic set: GC for the fatty acids, HPLC for the tocopherols, and GC after saponification for the sterols. FTIR can screen a sample against a reference spectrum, but it is a similarity check, not a proof of botanical source. If a solid deposit appears in a drum, XRD can identify the wax or the stearin, and that is a quality observation rather than an identity result. ## How a substitution shows up The obvious diluent is another ALA-rich oil, and flaxseed is the one that fits the profile most closely. A blend of perilla and flax can sit inside every catalog range, so the fatty-acid gate alone will not catch it. The commercial risk splits in two: dilution with a low-ALA oil is easy to see on the profile, and substitution with another ALA oil is not. Common perilla seed oil substitutions and the signals | Adulterant | Effect on the profile | Signal | Test | Flaxseed oil | ALA and linoleic stay close; saturates and minor fractions shift | Sterol and tocopherol pattern | GC sterols, HPLC tocopherols, isotope work | Soybean oil | Linoleic up, ALA down | Full profile | GC-FID | Rapeseed oil | Oleic up, ALA down | Full profile | GC-FID | Sunflower or high-oleic carrier | ALA down; oleic or linoleic up | Full profile | GC-FID | ALA concentrate | ALA high, minor fraction stripped | Sterols and tocopherols low | GC sterols, HPLC tocopherols | Old or oxidised oil | Profile little changed | PV and p-AV high | Peroxide and anisidine values Colour and odour are weak signals. A golden oil with a green note can be fresh perilla, and a refined blend can be made to look similar. The stronger signals are the full profile, the minor fractions and the oxidation values, read together. ## What the identity clause should say - “Perilla frutescens seed oil, cold-pressed from the seed; country of origin declared.” - “ALA 55.0–65.0% of total fatty acids by GC; linoleic and oleic 12.0–20.0% each.” - “Full fatty-acid profile reported, with the chromatogram.” - “Sterol and tocopherol profiles reported on request.” - “FFA ≤0.50% as oleic acid; PV ≤5.0 meq O2/kg; moisture ≤0.1%.” - “No added oil, antioxidant or diluent other than those declared.” - “Lot code on the certificate, the pack and the retained sample.” This catalog does not carry a CAS number for the oil. Perilla oil is a named oil rather than a single molecule, so the identity rests on the botanical source and the profile, and the specification should say so. ## Five questions to put in writing - Which species and which part is the oil pressed from, and where was the seed grown? - Please send the full GC chromatogram with the integration, not just the ALA total. - What are the sterol and tocopherol results for this lot? - Is the oil cold-pressed or refined, and is any antioxidant added? - If we disagree on a result, how is a referee test on the retained sample arranged? Those five answers make an identity file; one ALA figure does not. The catalog specification is on the perilla seed oil product page. Where each figure appears on the lot certificate is set out on the COA page, the pressing choice on the grade page, the GC and HPLC work on the methods index, and the release file on the quality page. The other ALA oil that can be confused with this one is on the flaxseed oil powder page. ### 01 What a phytosterol COA contains, line by line URL: https://nutrition.rainwoodbio.com/products/fatty-acids/phytosterols/coa/ Reviewed: 2026-11-19 A phytosterol certificate is read in two passes. The profile pass gives total sterols by GC and the individual sitosterol, campesterol and stigmasterol figures; the contaminant pass gives moisture, heavy metals, microbiology and the 80 mesh finish. A lot is released only when both passes are complete and the basis of the sterol figure is stated. In one lineThe total sterol figure says how much sterol is present; the sitosterol, campesterol and stigmasterol profile says which sterols, and a certificate needs both before the lot can be released. ## Reading the certificate line by line A certificate earns its place when a customer can audit it without calling the supplier. Every line should name the parameter, the analytical method and the acceptance limit; the measured value belongs in its own column. “Conforms” is a conclusion; the reader needs the evidence that produced it. The specification is split into two blocks. The first is identity and profile; the second is moisture, contaminants and physical finish. The limits below are catalog limits, not the results of a particular lot. Identity and sterol profile · phytosterols | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | GC sterol profile against standards | Conforms to the reference profile | Total sterols | GC, sum of identified sterols | ≥95.0% | Beta-sitosterol | GC | 40.0–60.0% | Campesterol | GC | 20.0–30.0% | Stigmasterol | GC | 15.0–25.0% Moisture, contaminants and physical finish | Parameter | Method | Release limit | Loss on drying | Gravimetric | ≤2.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh ## The GC basis: total sterols after saponification The number depends on the work-up. The usual method hydrolyses the sample with alkali, extracts the unsaponifiable matter, silylates the sterols and separates them by capillary GC with flame-ionisation detection. Retention times are matched to a standard mixture, and the total is the sum of the identified peaks. Because the hydrolysis step cleaves sterol esters, the result is total sterols rather than free sterols. That is the right figure for the free sterol powder, where the two are close. It is not enough to describe an ester: the same method measures the sterol cargo, and a separate free-sterol or ester-value test is needed to show the form. The certificate should name the work-up, not only the instrument. Moisture is the second basis. With loss on drying at ≤2.0%, a dried-basis total and an as-is total can differ by about two percentage points. A lot at 95.8% as-is with 1.7% moisture is 97.46% on the dried basis; the same 95.8% on the dried basis is 94.17% as-is. The certificate should say which one it reports, beside the result. ## Release limit versus batch result A limit is a boundary; a result is a measurement. They belong in different columns, with the method named. A result column that repeats the specification range has not reported a measurement. What the result column should show | Parameter | Release limit | Result | Total sterols | ≥95.0% | A measured percentage, with the basis and method | Individual sterols | Three ranges | A measured figure for each named sterol and the minor peaks | Loss on drying | ≤2.0% | A measured percentage | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot The profile is a set, not four separate pass or fail lines. The total must be consistent with the individual sterols, the minor peaks must be reported, and the moisture must explain the gap between the as-is and dried figures. A certificate with a total of 96% and individual figures that sum to 89% has a mass-balance question, even if every line is inside its range. The three ranges are broad because the raw material is a plant mixture. They are markers, not the whole composition. Brassicasterol, avenasterol and other minor sterols are part of the identity evidence and should appear in the peak table. ## What moves between batches Source and season move the profile more than the process does. A soy-type mixture, a sunflower-derived one and a tall-oil material have different sitosterol, campesterol and stigmasterol balances. A source change can therefore pass the total sterol limit and still fail the profile that the customer bought. Refining and crystallisation affect colour and the minor-sterol fraction; drying affects moisture; milling and sieving affect the 80 mesh result without touching the chemistry. The last point matters commercially: a new mill can change the particle-size line while the certificate's chemistry stays identical. Watch the direction of travel across lots, not just the latest number. A slow fall in total sterols, a stigmasterol result that has moved to the edge of its range, or a rising loss on drying is more informative than a single result in the middle. The certificate’s lot code should be the same code that appears on the pouch, the drum label and the sample kept for reference. ## When to order an outside test An outside laboratory is worth using when the source is new, the destination is regulated, the profile does not fit the declared source, or a result is disputed. The panel should be chosen for the question: GC with the chromatogram and peak table for identity, loss on drying for the moisture basis, ICP-MS for the metals, and a plate count plus absence tests for microbiology. If the material has been stored warm or is going into an oil blend, add the sterol oxidation products: 7α-hydroxy, 7β-hydroxy and 7-ketositosterol are the usual markers. If the extraction route is unclear, add residual solvents; if the market asks, add mineral oil hydrocarbons. A “not detected” statement needs a detection limit beside it, otherwise it describes the method rather than the sample. Keep the chain of custody short. The pack that was tested should be the pack that was retained, and the report should carry the lot code. In a dispute, give the referee the sample kept for reference, the supplier's certificate and the agreed specification, and ask for the test that tells the two possible sources or forms apart. ## What to compare between suppliers Compare seven things: form and source; total sterols and the basis; the three marker sterols and the minor peaks; loss on drying; heavy metals and microbiology; particle size; pack and lot code. Two offers that match on total sterols but differ on source or form are not the same material. Then check the paper trail: who made the lot, which raw material and process route were used, and how the material was dried and milled. The catalog specification is on the phytosterol hub; the profile tests are on the identity page; the form choice is on the grade page; the market file is on the compliance page; the GC background is in the methods index; the release route is on the quality page. ### 02 Free sterol powder or sterol ester: choosing a phytosterol grade URL: https://nutrition.rainwoodbio.com/products/fatty-acids/phytosterols/grades/ Reviewed: 2026-11-19 Phytosterols are supplied as a free sterol powder, as sterol esters and as diluted or granulated blends; the related stanols are a separate ingredient. The catalog grade here is the free sterol powder at ≥95% total sterols with a defined sitosterol, campesterol and stigmasterol profile; the ester is a different ingredient with a different sterol content per gram. In one lineThe grade is a dosage-form decision: the free sterol is a crystalline powder, the ester is an oil-soluble molecule, and the sterol mass per gram changes with the form. ## Why there is more than one phytosterol grade “Phytosterols” names a family of plant sterols, not one molecule. The family is extracted from vegetable oils or from tall oil, purified, and sold either as the free sterol or after reaction with a fatty acid to make a sterol ester. Stanols are the saturated relatives, and a diluted or granulated powder is the same sterol carried on a base or built into a coarser particle. Each choice changes something the buyer can measure: the sterol content per gram, the solubility, the melting behaviour, the label name and, in some markets, the entry that covers the material. The source matters too, because a soy-derived mixture, a sunflower-derived one and a tall-oil one do not have the same sterol profile. ## The grades side by side Free phytosterol powder and phytosterol ester | Property | Free sterol powder | Sterol ester | Total sterol content | ≥95.0% by GC | Roughly 55–65% free sterol equivalent | Form at room temperature | White to off-white powder | Oil or waxy solid | Water solubility | Insoluble | Insoluble | Fat solubility | Soluble in hot oil; recrystallises on cooling | Miscible with fats and oils | Melting behaviour | Melts around 130–140 °C | No sharp melting point as a mixture | Label name | Phytosterols or plant sterols | Plant sterol esters | Typical dosage form | Capsules, tablets, oil blends | Spreads, dressings, oil capsules | Sterol per gram | About 0.95 g | About 0.6 g The last two rows are the ones that decide a project. A capsule formula is built on the powder; a fat-based food is usually built on the ester. A label that declares a sterol quantity has to state which basis it uses, because 1 g of ester is not 1 g of sterol. ## Powder, crystal and oil Free phytosterols are crystalline. The catalog powder is ≥95% through 80 mesh, white to off-white, and insoluble in water. In an oil it dissolves only with heat and shear, and it recrystallises on cooling; that behaviour is useful in some fat systems and a nuisance in others. The powder is not hygroscopic in the way a salt is, but it cakes if moisture is trapped in the pack, and the loss on drying limit of ≤2.0% is a release condition, not a storage cushion. Sterol esters are oils or waxy solids at room temperature. They are miscible with edible fats, which is why they fit spreads, dressings and oil-filled capsules, and why they are not a drop-in for a powder capsule. A liquid or waxy ester has no 80 mesh finish; its physical specification is closer to an oil, with acid value and peroxide value beside the sterol content. Stanols are the saturated analogues. They are a separate ingredient with a separate profile and label name, not a grade of phytosterol. A stanol product should be specified as a stanol, with its own sterol and stanol composition. ## What the grade does to the dose A 500 mg capsule filled with the 95% powder delivers about 475 mg of total sterols. The same label built on an ester at 60% free sterol equivalent needs about 833 mg of ester to declare 500 mg of sterols. The arithmetic belongs in the specification review, because the fill weight, the capsule size and the label quantity all move with it. For an oil-based blend, the free sterol can be dissolved in hot oil and held in suspension or solution; the ester is easier to incorporate because it is already fat-soluble. A dry blend with MCT powder or another carrier is a third route: the carrier changes the flow, the dose per gram and the label, and the carrier's own specification has to be checked. A tablet needs flow and compressibility; an 80 mesh powder may need granulation. A capsule can take the powder directly. A stick pack or a beverage is an emulsion project, not a dissolution step, because the sterol is not water-soluble. The dosage form should be settled before the grade is ordered, not after the first stability batch. ## What to write into the specification - “Phytosterols, free sterol powder, source declared; CAS 83-46-5 for the beta-sitosterol reference.” - “Total sterols ≥95.0% by GC; beta-sitosterol 40.0–60.0%, campesterol 20.0–30.0%, stigmasterol 15.0–25.0%.” - “Loss on drying ≤2.0%; appearance white to off-white; particle size ≥95% through 80 mesh.” - “Heavy metals and microbiology as listed; the certificate states the basis of the sterol result.” - “For an ester: free sterol equivalent, acid value and peroxide value, in addition to the sterol profile.” - “Label name, source statement and destination market confirmed before the order.” The CAS number belongs to beta-sitosterol, the principal sterol, not to the mixture as a whole; the specification should say so rather than imply that one CAS number defines every sterol in the powder. ## When another grade is the wrong choice If the label declares free sterols, an ester is not a drop-in: the mass changes, the label name changes and the sterol figure needs a conversion. If the process needs a clear aqueous solution, neither the powder nor the ester provides one; that is an emulsion or dispersion project with its own data. If the formula needs a high sterol load per gram, a diluted grade moves the fill weight in the wrong direction. The catalog specification is on the product hub. The free sterol against the ester is compared in more detail on the level-four page; the release tests are on the COA page; the storage behaviour is on the stability page; the sieve terms are defined in the particle size glossary. ### 02.1 Phytosterols vs sterol esters: mass, solubility and the label URL: https://nutrition.rainwoodbio.com/products/fatty-acids/phytosterols/grades/phytosterols-vs-sterol-esters/ Reviewed: 2026-11-19 The free sterol is the crystalline sterol alcohol; the sterol ester is the same sterol with a fatty acid attached. The ester is oil-soluble, carries about 60% free sterol by mass, and appears on the label as a different ingredient, so the two are not interchangeable gram for gram. In one lineEsterification adds a fatty acid, so a gram of sterol ester carries roughly 0.6 g of free sterol and behaves like an oil, not like the crystalline powder. ## The bond that changes the ingredient Both materials share the same sterol nucleus. The difference is the hydroxyl group at position 3: in the free sterol it is open, and in the ester it is joined to a fatty acid through an ester bond. The sterol moiety is unchanged; the molecule around it is not. The mass difference is concrete. Beta-sitosterol has a molecular weight of about 414.7. A beta-sitosteryl oleate, with one oleic acid attached, is about 679.2. The fatty acid can be any food-grade acid, so the ester molecular weight and the sterol fraction move with the fatty acid profile of the batch. That is why an ester specification cannot be written by copying the free sterol specification. The free sterol is sold on total sterol content, typically ≥95% by GC. The ester is sold on free sterol equivalent, usually 55–65%, together with acid value and peroxide value. A ≥95% total sterol limit applied to an ester would fail a good lot, because the fatty acid is part of the molecule. ## The conversion and the label arithmetic The conversion is a mass fraction, not a single molecular-weight ratio, because a commercial ester is a mixture of sterols and fatty acids. The usable figure is the free sterol equivalent on the certificate, commonly around 60%. One gram of ester at 60% delivers about 0.6 g of free sterol; one gram of the 95% powder delivers about 0.95 g of total sterols. The arithmetic runs in both directions. A label that declares 500 mg of free sterols needs 500 ÷ 0.60 = 833 mg of ester at 60%. A label that declares 500 mg of ester delivers about 300 mg of free sterol equivalent. Neither figure is a dose recommendation; they are the calculations that keep the label, the fill weight and the certificate in agreement. There is a second trap in the assay. The GC method used for total sterols saponifies the sample, so it hydrolyses the ester before measurement. The result is the sterol cargo, not the ester content. A certificate that reports only “total sterols ≥95%” on an ester has not shown the form; ask for the free sterol equivalent, the ester value or a free-sterol test beside it. ## Solubility is the practical difference The free sterol is a crystalline powder. It is insoluble in water, dissolves in hot oil only with heat and shear, and recrystallises as the oil cools. That makes it the natural choice for a capsule or tablet, and a difficult choice for a clear fat-based food unless the process is built around the crystallisation. The ester is an oil or a waxy solid. It is miscible with edible fats, which is why it fits spreads, dressings, dairy analogues and oil-filled capsules. It is still not water-soluble: an ester in a beverage is an emulsion, not a solution. The formulator needs an emulsifier, a homogenisation step and a stability study in the matrix, not a stirring instruction. For a dry blend, the free sterol powder can be carried on MCT powder or another carrier to improve flow and dispersion. A liquid ester does not become a powder by simple blending; it needs a carrier with enough absorption capacity, and the resulting powder is a different specification. ## What the label and the entry have to say The label names the ingredient, not the family. “Phytosterols” or “plant sterols” describes the free sterol; “plant sterol esters” describes the ester. The quantity needs a basis: milligrams of ester, milligrams of free sterol equivalent, or milligrams of total sterols. A label that gives a number without the basis invites a comparison that the product cannot support. The source belongs on the label too, because the source sets the allergen and GMO statements. A soy-derived sterol and a sunflower-derived one are not the same declaration, even when both meet the same total sterol limit. In the EU, the novel-food entry for phytosterols and phytostanols covers material presented as free sterols or esterified with food-grade fatty acids, with conditions on use and labelling. The entry that applies, and the current wording, are confirmed by the buyer's regulatory team for the destination; the entry is not a label approval. US labelling relies on the Supplement Facts panel, which has to name the form and the source in the way the finished product's route requires. The compliance page sets out the documents. ## Stability follows the matrix The free sterol is a crystalline solid with a melting range around 130–140 °C. Its main storage risks are oxidation at the particle surface, caking from moisture, and heat that softens or melts the powder. A sealed, dry, dark pack keeps it stable; an open pouch in a warm room does not. The ester carries a fatty acid chain, which is an additional oxidation site. Peroxide value and acid value belong on its specification and in its stability protocol, and a hot hold with moisture can hydrolyse the ester. The ester is not automatically the less stable form; it fails in a different way, and the test panel has to match the failure mode. The stability page gives the protocol. ## When to choose which Choose the free sterol for capsules, tablets, dry blends and any label that declares phytosterols or plant sterols. It is the form with the ≥95% total sterol specification and the 80 mesh finish, and it is the form on the product hub. Choose the ester when the matrix is a fat-based food or an oil capsule and the label can declare plant sterol esters. The ester is easier to disperse in fat and harder to declare as free sterol, so the label and the formulation should be decided together. A switch in either direction is a reformulation: new fill weight, new label name, new specification and often new stability data. Put it through change control, and compare the certificate lines on the COA page before the first order. ### 03 Phytosterols are stable as a dry powder; oxidation is the real limit URL: https://nutrition.rainwoodbio.com/products/fatty-acids/phytosterols/stability/ Reviewed: 2026-11-19 A sealed pack of phytosterol powder is a low-risk material; the risk starts when the pack is opened, when the powder is melted into oil, or when the oil around it oxidises. Moisture, heat and oxygen are the three variables, and the test panel should follow whichever of them the product is exposed to. In one lineThe crystalline powder is not the fragile part; heat, light and oxygen at the surface, and the oil carrier in a blend, decide how long the sterol profile stays intact. ## The powder in the pack The catalog limit is loss on drying ≤2.0%. Read that as the release condition, not as a cushion for storage. Once a pouch is opened, the headspace exchanges with room air, the moisture content drifts up, and the powder can cake into lumps that no longer pass the 80 mesh sieve. The sterol assay may still be inside the range; the physical form is the first thing to go. Temperature is the second exposure. A free sterol powder softens near 130–140 °C, well above a normal warehouse, but a pallet parked beside a dryer or a drum in a hot container can approach that range. A warm pouch will not melt, but it will oxidise faster, and a powder that has been hot can be harder to disperse even when it looks unchanged. Keep the pack in a cool, dark store and let it come to room temperature before opening after cold transport, so condensation does not form inside the liner. Light is the third. Sterols oxidise at the surface, and ultraviolet light accelerates the reaction. The foil pouch is the barrier; a clear jar is an exposure. A yellow or brown cast on a white powder is a warning, not a cosmetic issue. ## Melt, oil blend and emulsion There is no water solution to worry about: the sterol is insoluble in water. The liquid formats that matter are the hot-oil melt, the oil blend and the emulsion. In a hot oil the free sterol dissolves and then crystallises as the oil cools; the cooling profile decides whether the product is smooth or grainy. That is a process variable, and it should be fixed before the stability study is designed. In an oil blend, the carrier is the first to oxidise. Its peroxide value and p-anisidine value belong in the test panel, and the sterol result alone can look clean while the oil has already turned. The hydroperoxides can then attack the sterol, so the two measurements are read together. An emulsion adds water and an interface. The sterol sits in the oil phase or at the droplet boundary, and the emulsifier, the homogenisation step and the storage temperature change the rate. A ready-to-drink product needs data in the drink; a powder result does not transfer to a beverage. ## What drives the change Exposures that move a phytosterol ingredient | Exposure | What changes | Control | Oxygen | Sterol oxidation products at the surface and in oil | Sealed pack; low headspace; nitrogen where specified | Light | Photo-oxidation and colour drift | Foil or opaque pack; dark store | Heat | Softening or melting; faster oxidation | Cool store; keep below the melting range | Water | Caking; higher loss on drying | Sealed pouch; dry store; desiccant if needed | Iron and copper | Metal-catalysed oxidation in oil or emulsion | Check contact surfaces and the carrier | Carrier oil | Oxidises first; its hydroperoxides attack the sterol | Specify PV and the carrier's own stability These exposures overlap in practice. A warm, bright, damp store multiplies the three effects rather than adding them, and an oil blend in clear glass adds light and oxygen to a carrier that is already prone to oxidation. The useful question is not whether phytosterols are stable in general, but whether this pack, this matrix and this storage condition hold the profile for the intended period. ## Designing the study Four decisions fix the study before the first sample is loaded: which pack, which condition, which time points and which tests. Hold one arm at 25 °C and 60% relative humidity, a second at 30 °C and 65% relative humidity, and a third at 40 °C and 75% relative humidity for the accelerated arm. Add a light-exposure arm, because a dark cabinet cannot show a photo-oxidation failure. The test panel follows the form. For the powder: total sterols, the individual profile, loss on drying, appearance, sterol oxidation products and microbiology. For an oil blend: add peroxide value, p-anisidine value and acid value. For an ester: add acid value and free sterol equivalent. Read the individual results, not only the pass statement, and tie the report to the pack and the lot family. The pouch and the drum do not behave identically: their headspace and surface-to-volume ratio differ. Request the study for the pack in the purchase order; a summary from another format is background, not evidence. ## The matrix decides the rest Capsules and tablets are low-water systems, yet their shells and excipients can still pass moisture. Measure moisture at release and again after storage, and inspect the fill: a soft or sticky fill is a signal even when the assay passes. Wet granulation adds water and heat; dry granulation or direct compression avoids both, and the route belongs in the stability file. An oil-filled capsule or a fat-based blend inherits the carrier's oxidation. A powder-filled capsule does not. For a stick pack, the seal and the foil are the package; a pinhole defeats both. Inspect the strip as well as the powder. An antioxidant can slow the oil, but it does not repair a poor seal or a carrier that was already oxidised. The formulator decides whether an overage or an antioxidant is needed. That decision belongs to the formula and the label, and it should be supported by data in the matrix rather than by a general rule. ## Assigning a retest period There is no single shelf-life number for phytosterols. The pack, the storage condition and the matrix set the retest period, and the number belongs on the specification only when the data behind it exists. A figure without those three details is a marketing statement, not a shelf life. At the end of the assigned period, re-test the reference sample before extending use. Do not assume an extension, and do not apply a bulk figure to a repacked container. Packs: product hub. Release tests: COA page. Ordering: MOQ page. Form: grade page. Release route: quality page. ### 04 Phytosterols: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/fatty-acids/phytosterols/moq/ Reviewed: 2026-11-19 The minimum order is 1 kg in a foil pouch, the production pack is a 25 kg fiber drum, and the standard lead time is 1–7 days. A quotation can only be compared when it names the form, the source, the total sterol and profile, the pack, the destination and the document set. In one lineThe kilogram is the qualification unit: one sealed pack, one lot code, one certificate and one reference sample; the drum is the same powder in a production format. ## Why the kilogram is the unit One kilogram is enough to run a bench trial, keep a reference pack and send a portion to a third party. It is also a quantity that can be sealed, labelled and traced as one lot; a smaller scoop taken from a drum is a repack and loses that link. The minimum is set by traceability as much as by convenience. At the other end, the 25 kg drum lowers the handling per kilogram but ties up inventory and storage time. Between the two there is no standard half-way pack; a custom granulation or dilution is a new specification, not a smaller bag. The pack decision should follow the trial result and the production plan, not precede them. ## Packs and formats Standard phytosterol packs | Pack | Weight | Typical use | Check | Foil pouch | 1 kg | Trial, sample, small batch | Reseal after opening; moisture and light barrier | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Particle profile changes; new specification line | Dilution | On request | Lower sterol content per gram | Carrier, assay and label change The catalog material is an 80 mesh powder: ≥95% through 80 mesh. A granulated or diluted version is a different purchase order line, and the quotation should say so. If the capsule or tablet process needs a coarser or freer-flowing powder, raise it before the quotation, because the change can move both the particle-size limit and the lead time. An ester is a separate order. It is an oil or a waxy solid with its own pack and specification; the pouch and drum above describe the free sterol powder. The grade page explains the difference. ## From confirmation to dispatch The standard pack ships 1–7 days after the order is confirmed. That clock covers picking, paperwork and hand-over to the carrier; it stops before transit, customs and the customer's own release. Anything outside the standard pack — a granulation, a dilution, a special liner — needs extra time, and the offer should show that time as a separate line. Ask for the dispatch date as well as the lead time. A drum usually moves on a pallet and a pouch as a parcel; the trade term sets who arranges freight and who handles entry. Documents should move with the consignment, not chase it. ## Six fields that make a quotation comparable - Material. Phytosterols, free sterol powder, source declared, CAS 83-46-5 as the beta-sitosterol reference. - Profile. Total sterols and basis, the three individual ranges, loss on drying and particle size. - Pack. The 1 kg foil pouch, the 25 kg fiber drum, or a custom granulation or dilution. - Route. Destination country, port or address, and the Incoterm. - Documents. COA, TDS, SDS, source and allergen statement, and any market declaration the importer needs. - Use. Capsule, tablet, oil blend or food, and the destination market for the finished product. Without the source and the form, two quotations can look identical and describe different materials. A soy-derived powder and a tall-oil material may both read ≥95% total sterols and still differ in profile, paperwork and market fit. Commercial terms belong on the quotation, not on this page. ## Qualification starts with the kilogram The 1 kg pouch is the pack to qualify. Test identity, the sterol profile, total sterols, moisture and microbiology before scaling up, and hold back a portion of the same pack as the reference. The lot code on the pouch, the COA and the quotation should agree; if they do not, the sample is not a qualification sample. A smaller bench quantity can be discussed, but it will be a repack from a larger lot with its own traceability. Do not assume the bench material and the production drum are from the same lot; if that matters, ask for the lot allocation in writing. ## What to settle in writing The written offer should cover the commercial terms, the delivery term, the pack, the lead time and the document list. The quality terms belong beside them: specification revision, COA per lot, reference sample, retest period and the change-control route. A source change, from soy to sunflower or to tall oil, is a specification change even when the total sterol figure stays inside its range. Decide before the first order how a failing lot will be handled. A joint re-test on the reference sample is more useful than a photograph, and the two sides should agree on the laboratory and who pays for the referee. A quality agreement signed before production is easier to use than one negotiated after a dispute. Specification: product hub. Release tests: COA page. Market file: compliance page. Release route: quality page. Order vocabulary: MOQ glossary. Shipping: logistics page. ### 05 The regulatory file for phytosterols URL: https://nutrition.rainwoodbio.com/products/fatty-acids/phytosterols/compliance/ Reviewed: 2026-11-19 A phytosterol file is assembled around the material that will actually be shipped: the free sterol or the ester, the declared source, and the market where the finished product will be sold. The buyer's regulatory team confirms the route. What follows is the document set and the checks that make that review possible; no disease-related claim is made here. In one lineA phytosterol file is specific to the form and the source: the free sterol, the ester and the stanol are not interchangeable on the label or in the market entry. ## Four folders, one file Think of the file as four folders. The first holds the specification and the technical data sheet: form, source, total sterols, profile, moisture and particle size. The second holds the lot records: certificate, methods and the basis of each result. The third holds the route: destination, finished-product category, use level and label. The fourth holds change control: what triggers a review when the source, the process or the packaging changes. Most gaps appear at the joins. A certificate that does not name the source cannot support an allergen statement; a specification that says “phytosterols” without the form cannot support a label. List document titles and version numbers rather than keeping a folder of undated files. ## European Union Phytosterols and phytostanols sit in the EU novel-food framework: Regulation (EU) 2015/2283 and the Union list in Implementing Regulation (EU) 2017/2470. The list entry covers material presented as free sterols or esterified with food-grade fatty acids, sets the food categories and a maximum level, and adds labelling conditions. At the time of this review the maximum is 3 g/day, and the entry sets ceilings for individual sterols. Read the current consolidated text before using a figure. Two forms can fall under the same entry and still need different labels and a different quantity basis. The buyer's regulatory team confirms that the entry covers the exact form, source and finished product; the catalog ranges on this site are not a substitute for that check. A lot can pass the catalog and still need a separate look against the entry. Alongside the entry: Regulation (EU) 2023/915 for contaminants, Directive 2002/46/EC for food supplements, Regulation (EU) 1169/2011 for labelling, and Regulation (EC) 1924/2006 for claims. The current text governs; a summary does not. ## United States In the US, the route turns on the form, the source, the use level and the product type. Phytosterols and sterol esters can be used as dietary ingredients; a food use may rest on a GRAS basis. The supplier needs to identify the basis and show the document that supports it; the buyer confirms that it covers the finished product and the intended use. FDA does not pre-approve a dietary ingredient, so the file is the evidence. Allergen review starts with the source. A soy-derived sterol and a sunflower-derived one do not carry the same statement, and a highly purified ingredient still needs the source reviewed. The Supplement Facts panel should name the ingredient in the form used, not just the family name. ## Contaminants and limits Contaminant limits apply to the finished product, so the drum result is only an input. The table is a starting point for a supplement file; the destination's current text and the daily dose set the final number. Contaminant limits to confirm for the finished product | Parameter | Reference level | Evidence required | Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method, limit and the finished-product calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception that applies | Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result and method | Arsenic (As) | Customer or market limit | The agreed limit and the method, stated on the certificate Sterol oxidation products, residual solvents and mineral oil hydrocarbons are outside the catalog specification. Ask for them when the lot has been stored warm, when the extraction route is unclear, or when the market requires the data. A “not detected” statement without a detection limit is not a result. ## Claims and the label This page makes no disease-related claim. Nutrition and health claims follow the destination's claims framework; the brand's reviewer confirms the wording, the form and the conditions of use. A certificate is not a claim approval, and a claim cannot be used to alter the specification. The label names the material, the source and the quantity on the right basis. For an ester that means ester mass, free sterol equivalent or total sterols, stated explicitly. For the free sterol the total sterol figure and the source statement are the minimum. ## Documents to keep on file Documents in a phytosterol regulatory file | Document | Why it is in the file | Specification (TDS) | Form, source, total sterols, profile, moisture and physical limits | Certificate of analysis | The lot results, the methods and the basis of each figure | Safety data sheet | Handling, storage and transport classification | Source and allergen statement | The plant or tall-oil source and the allergen review that follows it | GMO and origin statement | The source, the country of origin and the process route | Residual-solvent statement | The extraction and purification route | Stability summary | The pack, the storage condition and the assigned retest period | Novel-food confirmation | The entry and conditions the buyer relies on for the destination ## Checklist before the first order - The specification names the form, the source and the version. - The certificate reports the profile, the moisture basis and the contaminants for the lot. - The contaminant figures have been converted to the finished-product dose. - The label states the form and the quantity basis, and the claim review is closed. - The destination route has been confirmed for the exact material. - The source, the process and the packaging have a change-control route, and the quotation, specification and certificate share one version. Specification: product hub. Analytical evidence: identity page. Lot reporting: COA page. Release process: quality page. Market notes: EU, US, UK. ### 06 How we prove a phytosterol lot is the named mixture URL: https://nutrition.rainwoodbio.com/products/fatty-acids/phytosterols/identity/ Reviewed: 2026-11-19 A phytosterol lot is not identified by one beta-sitosterol number. The evidence is a GC profile: total sterols, the sitosterol, campesterol and stigmasterol percentages, the minor sterols and the ratios between them. The profile has to fit the declared source and close with the moisture figure. In one lineIdentity is the profile: the total sterol figure, the three marker sterols and the source markers have to agree before the lot is the material named on the label. ## Five pieces of evidence Identity is a set of measurements that agree, not a single test that passes. The useful evidence is the document, the GC peak table, the total sterol mass balance, the minor-sterol pattern and, where the solid form is in question, an X-ray diffraction pattern. Each answers a different question; none of them alone proves the material. Evidence for a phytosterol identity file | Evidence | Question it answers | What it cannot show | Document | Is the material, form and source named? | Whether the powder matches the paper | GC peak table | Which sterols are present, and in what proportion? | Whether the solid form is crystalline | Total sterol mass balance | Do the total, the individual figures and the moisture agree? | Which source the sterols came from | Minor-sterol pattern | Does the source declaration fit the fingerprint? | A quantitative total sterol result | XRD pattern | Is the solid crystalline, and does it match a reference? | The sterol ratio or the total content ## The ratios and the source The catalog ranges are beta-sitosterol 40.0–60.0%, campesterol 20.0–30.0% and stigmasterol 15.0–25.0%, with total sterols ≥95.0%. A lot must sit inside each range, but the ranges alone do not identify the source. The ratios do more work: a sitosterol to campesterol ratio near 2 and a stigmasterol level above 15% fit a soy-type mixture; a tall-oil material is mostly sitosterol with little stigmasterol; a sunflower material usually carries less stigmasterol and a delta-7-stigmastenol marker. The minor peaks are the fingerprint. Brassicasterol points to rapeseed, delta-7-stigmastenol to sunflower, avenasterol to several seed oils. A peak table that stops at the three named sterols leaves the source question open, which matters when the allergen or GMO statement depends on it. Normalisation is the other trap. A result can be a percentage of the total sterol fraction or a percentage of the powder as weighed. The two are different, and the certificate should state which. The individual figures and the total should also close with the loss on drying; if they do not, the mass balance is the first thing to investigate. ## X-ray diffraction: what it can and cannot do Free phytosterols are crystalline, so an XRD pattern can show whether the solid is crystalline and whether it matches a sterol reference. That is useful when a dilution with an amorphous carrier is suspected, or when two lots from different sources are being compared. XRD cannot quantify the sterol profile. It will not tell the buyer how much sitosterol, campesterol or stigmasterol is present, and it cannot replace the GC. A “match” statement without the reference pattern and the detection limit is not evidence. For a disputed lot, use XRD with the GC and the mass balance, not instead of them. ## Adulteration and its signals Phytosterol substitutions and the evidence that catches them | Substitution | What changes | Evidence | Silica, starch or maltodextrin | Less sterol per gram | Total sterols low; ash, loss on drying or mass balance shifts | Tall-oil sterols | Mostly sitosterol; little campesterol or stigmasterol | Stigmasterol below range; high sitosterol to campesterol ratio | Added stigmasterol | Raises the total sterol figure | Stigmasterol above range; the other sterols fall | Sterol ester in a free sterol lot | Fatty acid mass; different solubility | Free sterol low; ester value present | Water | Lower as-is sterol figure | Loss on drying high; dried-basis total normal Appearance is the weakest evidence: a white diluent looks like a white sterol. The profile, the ratios and the mass balance are stronger. A supplier who reports only appearance and total sterols has left a common substitution untested. ## Writing identity into the specification - “Phytosterols, free sterol powder, source declared; CAS 83-46-5 for the beta-sitosterol reference.” - “Total sterols ≥95.0% by GC; beta-sitosterol 40.0–60.0%, campesterol 20.0–30.0%, stigmasterol 15.0–25.0%.” - “Identification by GC retention time against a sterol standard mixture; report the full peak table.” - “Loss on drying ≤2.0%; the certificate states whether the sterol result is as-is or dried basis.” - “Report the minor sterols, including brassicasterol and avenasterol, where the source claim depends on them.” - “Particle size ≥95% through 80 mesh; heavy metals and microbiology as listed.” ## Questions that produce an identity file - Which source is this lot, and does the minor-sterol pattern support the declaration? - Can you send the full GC peak table and the chromatogram, not only the three named percentages? - What is the total sterol basis, and how do the individual figures close the mass balance? - Is the material the free sterol or an ester, and which test shows the form? - If a result is contested, would you agree to a joint re-test of the retained pack? The five answers together are the identity file; one assay percentage is not. Specification: product hub. Certificate lines: COA page. Forms: grade page. Free sterol versus ester: level-four page. GC background: methods index. ### 01 What the COA for pumpkin seed oil actually contains URL: https://nutrition.rainwoodbio.com/products/fatty-acids/pumpkin-seed-oil/coa/ Reviewed: 2026-11-19 A lot of cold-pressed pumpkin seed oil is judged on two separate questions: is the fatty acid make-up the one that was bought, and is the oil in good condition. The certificate answers both when it reports the GC profile, free fatty acid, peroxide value, moisture, colour, metals and microbiology, each with a method and a limit. The catalog values below are the release gates; the COA is the record of one lot against them. In one lineThe linoleic and oleic figures describe the oil, the free fatty acid and peroxide value describe its condition, and a certificate needs both before the lot can be released. ## Reading the certificate Each line should let a second laboratory repeat the measurement: the parameter, the method and the limit, with the result in its own column. A bare “conforms” hides which test was run and what it found. A percentage with no method is difficult to compare across suppliers. Release specification for cold-pressed pumpkin seed oil, CAS 8016-49-9 | Test | Method | Limit | Basis | Appearance | Visual | Dark green to brownish-green; clear to slightly hazy | Oil as sold | Identification | GC fatty acid profile | Conforms to the reference profile | Oil as sold | Linoleic acid (C18:2 n-6) | GC-FID of fatty-acid methyl esters | 45.0–55.0% of total fatty acids | Oil as sold | Oleic acid (C18:1 n-9) | GC-FID of fatty-acid methyl esters | 25.0–35.0% of total fatty acids | Oil as sold | Free fatty acid | Titration as oleic acid | ≤0.50% | Oil as sold | Peroxide value | AOCS Cd 8b-90 or ISO 3960 | ≤5.0 meq O₂/kg | Oil as sold | Moisture | Karl Fischer | ≤0.1% | Oil as sold | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Oil as sold | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Oil as sold The profile rows and the condition rows answer different questions. The first two percentages say what the oil is; the next three say how it has been handled. The GC row also needs the chromatogram, the column, the esterification route and the standard, because two C18 acids can be close enough to merge if the separation is poor. ## Fatty acid share versus oil mass GC results are normally normalised to the total fatty acid content, not to the weight of the bottle. That matters as soon as the figure is used for a label: 50% linoleic acid in the fatty acid fraction corresponds to about 47.5 g per 100 g of oil after the glycerol part is accounted for, because the acids are esterified to glycerol. A factor near 0.95 is usual; the certificate and the label should use the same convention. The other numbers have their own conventions. FFA is a titration expressed as oleic acid and reports the unesterified fraction, not total acidity. PV is measured per kilogram of oil and covers hydroperoxides. Moisture is measured on the oil as sold. These are not interchangeable percentages, and a certificate that does not name the basis leaves room for a conversion mistake. ## Limit, result and the condition figures A limit is the boundary for release; a result is what the lot measured. They should never share a cell. If the result column simply repeats the range, the reader has learned the specification but nothing about the lot. What the lot record should show for each test | Test | Limit | Expected record | Linoleic acid | 45.0–55.0% of total fatty acids | Measured value, basis and chromatogram | Oleic acid | 25.0–35.0% of total fatty acids | Measured value from the same run | Free fatty acid | ≤0.50% | Measured value as oleic acid | Peroxide value | ≤5.0 meq O₂/kg | Measured value, method and test date | Moisture | ≤0.1% | Measured value | Metals and microbiology | Element- and test-specific | A result per element; counts and absence statements FFA and PV are the two numbers that change most between release and use. A lot can pass the profile and still be a poor purchase if PV is close to the ceiling or FFA has risen. PV also falls as hydroperoxides decompose, so a lower figure is not automatically better; the test date and p-anisidine value give the fuller picture. p-AV is not in the catalog but is worth requesting when oxidation is the concern. ## Why two good lots can differ The fatty acid profile follows the seed. Variety, latitude and season shift the balance between linoleic and oleic acid, and a lot at the edge of one range is usually at the opposite edge of the other. The catalog window is deliberately wide enough to absorb that variation; a value near a limit is not a defect by itself. Handling changes the condition numbers. Cracked or damp seed raises FFA before the press; heat, light and air raise PV afterwards. A cold-pressed oil is not refined, so FFA and colour pass into the bottle, and filtration removes sediment without undoing oxidation. Colour is the least numerical signal; a duller or browner tone can mean oxidation, a different press batch or simply a different seed, so it should prompt a look at the batch record rather than an automatic rejection. The lot code on the COA, the pack and the retained sample should be the same. ## Using an outside laboratory Outside testing is most useful when the supplier's certificate leaves a question open: a new source, a first import, a suspected blend or a disputed result. Rather than repeating every line, target the gap. A full GC-FID run with the chromatogram, column, standard and quantification limit addresses identity and profile. Sterol and tocopherol patterns address authenticity. FFA and PV by a named method address condition, with p-AV added if oxidation is the issue. Metals and pesticides address the seed source, and a PAH screen is prudent where the seed was dried with combustion gases. Ask for the limit of quantification with any “not detected” statement; without it, the result describes the method, not the sample. Keep the sample chain intact: the laboratory should test the retained sample and identify the lot in its report. If a result is challenged, a joint retest aimed at the specific question is more useful than a second full panel. ## What to compare between suppliers Two certificates can quote the same linoleic acid and still describe different materials. Compare the basis, the condition of the oil, the authenticity evidence, the grade and the traceability, not just the headline percentage. Five comparison points for pumpkin seed oil offers | Point | Ask for | Why it matters | Profile | Full GC, basis and chromatogram | A measured oil, not a copied range | Freshness | FFA and PV with test date | An old lot can pass the profile | Authenticity | Sterol and tocopherol results | Sunflower blends can pass the profile | Grade | Cold-press record and filtration | Cold-pressed is not refined | Traceability | Lot code on COA, pack and retention sample | A certificate should belong to the lot The catalog specification is on the pumpkin seed oil product page; the grade choice is on the grade page; the authenticity tests are on the identity page. The methods index explains the GC work, the quality page covers lot release, and the flaxseed oil powder product page shows the other side of the comparison. ### 02 Pumpkin seed oil: cold-pressed or refined URL: https://nutrition.rainwoodbio.com/products/fatty-acids/pumpkin-seed-oil/grades/ Reviewed: 2026-11-19 Pumpkin seed oil is bought cold-pressed or refined. The cold-pressed grade is the dark green oil with the profile and the minor components carried through; the refined grade is a pale, neutral oil with a lower free fatty acid and a longer ambient shelf life. The catalog grade here is cold-pressed, specified at linoleic 45.0–55.0%, oleic 25.0–35.0%, free fatty acid ≤0.50% and peroxide value ≤5.0 meq O₂/kg. In one lineThe grade is a specification decision before it is a flavour decision: cold-pressed keeps the colour and the minor components, refined removes them and changes what the label can say. ## Why the grade is a specification, not a style Both grades come from the same seed. The difference is the process after pressing: a cold-pressed oil is settled and may be filtered, but not refined, so free fatty acids, phospholipids, waxes, chlorophyll, sterols and tocopherols remain in the oil; a refined oil passes degumming, neutralisation, bleaching and deodorisation, which remove most of the free fatty acids, pigments and volatiles and reduce the sterols and tocopherols. The fatty acid profile can be close on paper and the two oils are still different materials. “Cold-pressed” is a process description rather than a compositional grade. It should be backed by a process record that states the pressing temperature and confirms that no refining step was applied. A certificate cannot prove the process; the manufacturing record and a supplier audit can. ## The two grades side by side The table compares the catalog grade with a typical refined oil. The refined figures are market-typical, not catalog limits for this product; a refined grade would need its own agreed specification. Cold-pressed and refined pumpkin seed oil compared | Property | Cold-pressed (catalog grade) | Refined (typical) | Appearance | Dark green to brownish-green; clear to slightly hazy | Pale yellow to light amber; clear | Colour source | Chlorophyll and related pigments retained | Most pigments removed | Free fatty acid | ≤0.50% | Typically ≤0.10% | Peroxide value | ≤5.0 meq O₂/kg | Typically ≤2.0 meq O₂/kg after deodorisation | Flavour and odour | Strong, nutty, green | Neutral | Sterols and tocopherols | Retained | Reduced by the refining steps | Typical use | Softgels, oil blends, a labelled cold-pressed claim | Neutral blends, high-volume fill Refined is not automatically the better buy. It is more stable and more neutral, which is an advantage in a flavour-sensitive blend, but it loses the minor components and the cold-pressed description. The reverse is also true: the cold-pressed grade is not a drop-in for a neutral oil in a formula that cannot carry the colour or the taste. ## Colour, clarity and the cold-press signature The dark green colour is the first thing a buyer sees and the least reliable thing to buy on. Chlorophyll and related porphyrins give the oil its green and its red fluorescence in a thin layer; the exact hue moves with the seed, the press and the filtration. A cold-pressed oil can be clear or slightly hazy, and sediment or a fine cloud can appear after standing. A cloud at refrigerator temperature is a physical change, not spoilage; it should clear as the oil warms. Viscosity and density are unremarkable for a seed oil, and neither is a useful identity test. The physical lines that matter commercially are clarity, colour and the absence of sediment in the pack, because they decide whether the oil is acceptable in a softgel or a clear bottle. Record them against a retained sample rather than a colour chart. ## Dose arithmetic for a softgel, a blend or a powder The catalog does not set a serving; the brand does. What the catalog sets is the share of linoleic and oleic acid, and that share is what the label arithmetic uses. At 50% linoleic acid of total fatty acids, 1,000 mg of oil carries about 500 mg of linoleic acid, or about 475 mg once the triglyceride conversion is applied. A 500 mg softgel carries half of that. These are arithmetic examples, not a recommended intake. If the oil is sprayed onto a carrier, the oil load is the second factor. A powder at 50% oil load carries 0.5 g of oil and, at the same profile, about 0.24 g of linoleic acid per gram of powder. A label that declares the powder weight without the oil load says nothing about the fatty acid being bought. State the oil load, the profile basis and the conversion on the specification. The dosage form also decides the grade. A softgel or a dark bottle keeps the cold-pressed oil out of the light; a clear bottle on a shelf does not. A neutral-tasting blend may be easier to build on refined oil, but then the label cannot use the cold-pressed description. ## What to write into the specification - “Pumpkin seed oil, Cucurbita pepo, cold-pressed, CAS 8016-49-9.” - “Linoleic acid 45.0–55.0% and oleic acid 25.0–35.0% of total fatty acids by GC-FID; report the full profile.” - “Free fatty acid ≤0.50% as oleic acid; peroxide value ≤5.0 meq O₂/kg.” - “Moisture ≤0.1%; appearance dark green to brownish-green, clear to slightly hazy.” - “Heavy metals and microbiology as listed; pesticides and PAH results on request.” - “Cold-pressed process record; no refining step; pack and storage condition named.” ## When the cold-pressed grade is the wrong buy If the formula needs a neutral taste and colour, or a long ambient shelf life in a clear pack, the refined grade is the practical choice. If the label promises a cold-pressed oil, the refined grade is not a drop-in: the colour, the flavour and the minor-component content all change, and the process claim no longer matches the material. A buyer who needs the dark colour and the retained sterols and tocopherols should not accept refined oil with a note that the profile is the same. The profile is one line; the grade is the rest of the specification. Changing grade means a new specification, a fresh label review and a written change control. The catalog specification sits on the pumpkin seed oil product page; the head-to-head with the other seed oil is on the pumpkin seed oil versus flaxseed oil page; the release tests are on the COA page; the oxidation story is on the stability page. The flaxseed material is described on the flaxseed oil powder product page, and the release workflow is on the quality page. ### 02.1 Pumpkin seed oil vs flaxseed oil: two seed oils, two profiles URL: https://nutrition.rainwoodbio.com/products/fatty-acids/pumpkin-seed-oil/grades/pumpkin-seed-oil-vs-flaxseed-oil/ Reviewed: 2026-11-19 Pumpkin seed oil is the linoleic oil: the catalog sets linoleic acid at 45.0–55.0% and oleic acid at 25.0–35.0% of total fatty acids, with alpha-linolenic acid below 1%. Flaxseed oil is the alpha-linolenic oil, with ALA at roughly 45–65% and linoleic acid at 11–24%. The two oils supply different essential fatty acids, oxidise at different rates and are declared on different bases, so one is not a substitute for the other. In one linePumpkin seed oil is an omega-6 oil and flaxseed oil is an omega-3 oil; the profile, the oxidation risk and the label all follow from that difference. ## Two oils, two fatty acid profiles The table compares the oils on the oil basis. The pumpkin oleic and linoleic ranges are catalog limits; the other figures are published ranges for each oil, and the powder specification implies at least 45% ALA in the oil it carries. Fatty acid profiles of pumpkin seed oil and flaxseed oil, as a share of total fatty acids | Fatty acid | Pumpkin seed oil | Flaxseed oil | Palmitic (C16:0) | 10–15% | 4–7% | Stearic (C18:0) | 5–8% | 2–4% | Oleic (C18:1 n-9) | 25–35% (catalog) | 13–29% | Linoleic (C18:2 n-6) | 45–55% (catalog) | 11–24% | Alpha-linolenic (C18:3 n-3) | Below 1% | 45–65% | Dominant essential acid | Omega-6 (linoleic) | Omega-3 (alpha-linolenic) Pumpkin's saturated share is higher and its polyunsaturated share is concentrated in linoleic acid; flaxseed's is concentrated in ALA. The two profiles are close enough in total unsaturation to look similar on a label that only says “polyunsaturated”, and different enough that the fatty acid that matters is not the same. ## Omega-6 and omega-3 are different purchases Linoleic acid is an omega-6 fatty acid; alpha-linolenic acid is an omega-3. Both are essential, and the body cannot convert one into the other. They sit in different metabolic families, and a formula that declares ALA cannot be built from a linoleic oil, however similar the total fatty acid numbers look. ALA can be converted to longer-chain omega-3 fatty acids, but the conversion is limited; the oil is bought for the ALA it declares, not for an assumed conversion. The commercial consequence is simple. If the label declares omega-3 or ALA, the flaxseed line is the one that matches. If the formula is built around an omega-6 oil, pumpkin is the one that matches. A blend can carry both, but then both have to be declared, and the oxidation of the more unsaturated oil sets the shelf life of the blend. ## Which oil oxidises faster, and why ALA has three double bonds, linoleic acid two, and oleic acid one. The more double bonds, the faster the oil reacts with oxygen; flaxseed oil is therefore the more oxidation-sensitive of the two, and it is normally handled as a supplement oil rather than a cooking oil. Pumpkin oil is not stable by comparison: its linoleic acid is still a polyunsaturated acid, and a cold-pressed oil also carries chlorophyll, which can sensitise photo-oxidation. The pack has to match the oil. Flaxseed is supplied on this site as a 50% microencapsulated powder, which puts a wall between the oil and the air and makes the ALA easier to handle in a stick pack or a capsule. Pumpkin is supplied as the cold-pressed oil in an amber bottle. Both need a low-oxygen headspace, a light barrier and a cool store; the flaxseed powder needs the wall to stay intact, and the pumpkin oil needs the bottle to stay closed. Peroxide value and p-anisidine value are the working numbers for both. PV rises first; p-AV follows as hydroperoxides break down. A low PV with a rising p-AV is not a fresh oil, and a TOTOX calculated from the two is a better summary than either alone. ## Dose arithmetic on the oil and on the powder The two oils are declared on different bases, and the arithmetic follows the basis. At 50% linoleic acid, 1,000 mg of pumpkin oil carries about 500 mg of linoleic acid, or about 475 mg after the triglyceride conversion. At 45% ALA in the oil, 1,000 mg of flaxseed oil carries about 450 mg of ALA, or about 428 mg after the same conversion. The flaxseed powder on this site is a 50% oil powder with ALA at ≥22.5% on the powder, so 1,000 mg of powder carries at least 225 mg of ALA, and the oil inside it carries at least 45% ALA. The numbers are not additive and not interchangeable: 500 mg of linoleic acid is not 500 mg of ALA. A label that declares “500 mg of plant oil” has not said which fatty acid the consumer is getting. State the oil, the fatty acid, the amount and the basis — oil or powder — on the specification and the label. These are arithmetic examples, not a recommended intake. The serving size belongs to the brand and to the destination rule, and the label claim, if any, has to meet its own condition. ## What the label has to say The ingredient name has to match the oil: “pumpkin seed oil” or “flaxseed oil”, with the botanical source where the destination requires it. The fatty acid declaration follows the form. A liquid oil is declared as oil; the flaxseed powder is declared as the powder, with its oil load and ALA content, and the carrier if the destination requires it. A label that names the powder but declares the oil figure, or the reverse, is the commonest arithmetic error in this pair. An omega-3 or omega-6 statement is a nutrition claim only when the finished product meets the condition in the destination rule; it is not a description of the ingredient. Neither oil is on the EU Annex II allergen list or the US major-allergen list, but the finished product may carry other allergens, and the buyer's regulatory team confirms the destination position. “Cold-pressed” describes the pumpkin process and should be backed by the process record. ## When to choose which Choose pumpkin seed oil when the formula needs a linoleic-dominant oil, a dark green cold-pressed oil for a softgel or an oil blend, or a carrier oil with a characteristic colour. Choose flaxseed when the formula needs ALA, and expect the powder format on this site: the 50% oil powder is designed for capsules, sticks and blends where a liquid ALA oil would oxidise or be difficult to handle. If the project needs a liquid flaxseed oil, specify it as a separate material with its own specification and stability file. A switch in either direction is a new specification, not a substitution. The fatty acid declared, the dose arithmetic, the oxidation risk and the label all change. Write the change control before the purchase order, and check the destination rule for the claim that the label will carry. This comparison sits under the pumpkin seed grades page; the catalog specification is on the pumpkin seed oil product page; the oxidation controls are on the stability page. The flaxseed material is described on the flaxseed oil powder product page, the methods are in the methods index, and the release workflow is on the quality page. ### 03 Cold-pressed pumpkin seed oil oxidises; the pack sets the shelf life URL: https://nutrition.rainwoodbio.com/products/fatty-acids/pumpkin-seed-oil/stability/ Reviewed: 2026-11-19 Oxidation is the failure mode that sets the useful life of cold-pressed pumpkin seed oil. Linoleic acid accounts for roughly half of its fatty acids, and oxygen attacks those double bonds; daylight, warmth and traces of iron or copper speed the reaction, while the chlorophyll that colours the oil can make light damage worse. Moisture is a second route, because it lets hydrolysis raise the free fatty acid. The pack and the storage temperature decide how quickly either route advances. In one lineThe shelf life is an oxidation budget: the pack, the light and the temperature decide how fast the linoleic acid spends it. ## The sealed pack: moisture, light and headspace At release the oil must measure ≤0.1% moisture. That figure is a starting point, not a guarantee for the life of the bottle: an open cap lets humid air in, and water encourages the splitting of triglycerides that shows up as free fatty acid. The closure, the liner and the fill headspace are therefore part of the specification, not packaging detail. The amber bottle is doing real work. Chlorophyll and related pigments absorb visible light and can pass that energy to oxygen, generating a reactive form that attacks the double bonds; the green colour and the light sensitivity come from the same molecules. A decanted clear jar, a shop window or a bright bench shortens the oil's life even at a comfortable temperature. Warmth accelerates both hydrolysis and oxidation. A sealed pack can usually sit in an ordinary warehouse, but a loading bay in summer, a car boot or a radiator shelf is not an ordinary warehouse. If a pack has been kept cold, let it reach room temperature before opening so that water does not condense on the oil or under the cap. ## The bulk oil and the finished matrix An oil is already a single liquid phase, so there is no aqueous dilution step to consider. The matrices that matter are the bulk container, the softgel fill, the blend and the emulsion or carrier powder, because each changes how much oxygen reaches the oil. In a 25 kg drum the oil has little exposed surface per kilogram, but the headspace is a stored supply of oxygen and the drum may be open for weeks. A softgel encloses a small volume with little headspace, yet the shell is not a perfect barrier and can pass oxygen or moisture. A blend changes the proportion of linoleic acid: a high-oleic carrier dilutes it and slows the reaction, while a flaxseed or sunflower addition raises the polyunsaturated share. A spray-dried powder exposes a far larger surface and adds a carrier with its own moisture and metal content. Once the oil is emulsified, the droplet interface becomes the vulnerable point: oxygen, light and metal ions can meet there. A powder that feels dry may still be oxidising inside the wall, so the extracted oil is the sample to test. ## What changes the oil in storage What changes pumpkin seed oil in storage | Driver | Effect on the oil | Practical control | Oxygen | Hydroperoxides form; PV climbs | Sealed pack; small headspace; controlled filling | Daylight | Photo-oxidation; colour loss | Amber or opaque pack; dark store | Heat | Faster oxidation and hydrolysis | Cool store; avoid hot transit | Iron and copper | Catalyse hydroperoxide breakdown | Stainless contact; no metal contamination | Water | Hydrolysis; FFA rises | Dry store; tight cap; ≤0.1% at release | Chlorophyll and tocopherols | Chlorophyll can sensitise light damage; tocopherols are consumed while protecting the oil | Light barrier; check tocopherols on long shelf lives The drivers reinforce one another: a warm, bright and humid shelf is worse than any one of them alone. The practical question is therefore not whether the oil is stable in general, but how long it stays inside its limits in a defined pack and store. ## A stability protocol for the oil Define the pack, the climate, the sampling times and the tests before the first sample goes in. For warehouse conditions, 25 °C/60% relative humidity is the long-term arm and 30 °C/65% relative humidity the intermediate arm; 40 °C/75% relative humidity is the accelerated arm that puts stress on the pack. Add a light-exposure arm, because a dark oven will never reproduce the photochemical route. At each point measure FFA, PV, p-anisidine value, moisture, appearance and the fatty acid profile. p-Anisidine is outside the catalog, but it captures the aldehydes that appear after hydroperoxides break down; PV can fall while the oil is still deteriorating. Report the numbers for each time point, with the pack and lot family identified, rather than a final pass statement. Rancimat or another induction-period test is useful for ranking formulations quickly, but the result depends on the airflow and temperature of the test and says nothing about light, headspace or the actual pack. Read it as a screening tool and confirm the ranking in the pack. ## What the formula adds A softgel shell, a blend partner or a carrier powder each introduce something new. The shell can donate moisture or transmit oxygen; the blend changes the polyunsaturated fraction; the carrier brings surface area, moisture and possibly metals. The antioxidant system should be written into the specification: tocopherols occur naturally in the oil, and a refined or blended material may need an added antioxidant or a chelator, which then has to be declared. Contact with iron or copper is easy to miss. Both metals break down hydroperoxides, so pumps, fittings, tanks and drum liners belong in the stability review. A small amount of copper can do more damage than a modest rise in storage temperature. For a blend, work out the linoleic contribution instead of relying on the front-of-pack oil name. A 20% addition of an oil with 50% linoleic acid puts 10% linoleic acid into the blend, and the blend's oxidation rate follows that number. ## How the shelf life is set No single shelf life can be quoted for the oil without naming the pack and the storage condition. The retest period is a specification value supported by stability data for that pack; it is not a property of the oil in the abstract. A number that comes without a pack, a climate and a test panel should not be used for a label. At the end of the retest period, re-test the retained sample before extending use. Do not extend by assumption, and do not apply a drum result to a repacked bottle. Once a bottle is opened, it is a different pack: the headspace is air and the oil has seen light. The in-use period for the opened bottle should be stated separately. The catalog specification is on the pumpkin seed oil product page; the release tests are on the COA page; the packs are on the MOQ page; the identity checks are on the identity page. The methods index explains the analytical background, and the quality page covers lot release. ### 04 Pumpkin seed oil: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/fatty-acids/pumpkin-seed-oil/moq/ Reviewed: 2026-11-19 Orders for pumpkin seed oil start at 1 kg, which ships in an amber glass bottle; production volumes move to a 25 kg HDPE drum. Standard packs leave within 1–7 days of confirmation. To price and schedule an order accurately, we need the grade, the pack and quantity, the destination and Incoterm, the document set, and the intended use. In one lineThe 1 kg bottle is the unit that can be released as a lot, sampled and shipped as a parcel; the drum is a production commitment, not a bigger sample. ## Why 1 kg is the starting point One kilogram is enough to run a bench trial, keep a buyer's retention sample and send a portion to an outside laboratory, while still being a released lot with a lot code. It also travels as a parcel, which matters when a formulation team needs material before the production plan is signed. Smaller quantities are normally split from a larger lot and repacked. That extra handling exposes the oil to air and light, and the new container no longer carries the original pack identity. The 25 kg drum lowers the handling cost per kilogram, but it also ties up inventory and starts a longer storage clock; once the drum is open, the headspace becomes the oxygen reservoir. The minimum is set by the pack and the traceability, not by a sales target. ## Packs and formats Packs for pumpkin seed oil orders | Pack | Net weight | Typical use | Notes | Amber glass bottle | 1 kg | Trial, sample, small batch | Light barrier; close tightly after use; write the opening date on the label | HDPE drum | 25 kg | Production | Tight closure; headspace holds oxygen; lot code on drum and label | Powder on carrier | On request | Stick packs and blends | Oil load and carrier are part of the specification The amber glass is functional: it filters the light that drives photo-oxidation in a cold-pressed oil. A clear bottle would change the storage behaviour of the pack while leaving the certificate unchanged. For the drum, ask for the closure and liner specification and record the opening date; the oil above the fill line is in contact with air. ## Lead time and dispatch Standard packs are quoted at 1–7 days from order confirmation. That window covers order picking, document preparation and handover to the carrier. Transit, customs clearance and the buyer's own quality release sit outside it. A custom pack, a carrier powder or a special closure is quoted separately, with its own timing. Ask for a dispatch date as well as a lead time. The oil is shelf-stable and does not require a cold chain, but it should not sit in a hot container or in direct sun. Documents should travel with the shipment, and the Incoterm should make clear who books the freight and who clears import. ## What a quotation needs Six details turn a price into an offer that can be compared with another: - Material and grade. Cold-pressed pumpkin seed oil, Cucurbita pepo, CAS 8016-49-9. - Agreed specification. Linoleic and oleic ranges, FFA, PV, moisture, metals and microbiology. - Quantity and pack. 1 kg bottle, 25 kg drum, or a powder on carrier. - Destination and Incoterm. Country, delivery point and trade term. - Documents. COA, technical data sheet, SDS and any destination-specific statement. - Use and market. Softgel, blend or food, and the country of sale. Without the grade and the destination, two quotations cannot be compared: the same fatty acid profile can be packed as a cold-pressed oil or a refined oil, and the documents follow the grade. Commercial terms are not published on this page; they are set out in the quotation. ## A sample has to be a released lot The 1 kg bottle is the qualification sample. Before scaling, check the fatty acid profile, FFA, PV, moisture and the sterol or tocopherol pattern, and retain part of the same bottle. The lot code on the bottle, the COA and the quotation should agree; if they do not, the sample cannot be tied to the material that will ship. A bench-scale split from a drum is a repack, with its own lot identity, and should be documented that way. It is not the catalog pack, and it may not come from the same lot as the production drum. If the project needs less than 1 kg, raise it before the order rather than assuming a split will be traceable. ## Quality terms to agree before the first shipment The commercial terms sit in the quotation; the quality terms belong in a supply agreement. Name the specification revision, the lot COA, the retention sample, the retest period, the change-notification route and the pack. If the specification is revised, the agreement should say how the buyer is told and which lots are affected. Decide in advance how a failed lot is handled: a joint retest on the retained sample, an agreed referee laboratory, and who pays for it. A photograph of the oil is not a test result. The same agreement should cover the documents that travel with each shipment and the contact for a quality question. The catalog specification is on the pumpkin seed oil product page; the release tests are on the COA page; the destination file is on the compliance page; the oxidation limits are explained on the stability page. The MOQ glossary entry defines the term, the logistics page covers freight and documents, and the quality page describes how a lot is released. ### 05 The regulatory file for pumpkin seed oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/pumpkin-seed-oil/compliance/ Reviewed: 2026-11-19 Pumpkin seed oil is pressed from Cucurbita pepo seeds (CAS 8016-49-9) and enters the market as a food oil, or as an ingredient in a supplement. Whether a particular finished product may be sold, and with what wording, is a question for the destination's rules and the buyer's regulatory team. What we can supply is the material file: the grade, the lot data, the contaminant results and the process statements that a review needs. In one lineThe oil is a food ingredient; the file has to show the grade, the contaminants, the label and the route for the destination. ## What a reviewer needs to see A reviewer usually works through four things: the identity and specification of the material, the evidence for the lot, the limits and labelling rules for the market, and the change-control story if the source or process moves. Our part is the first two plus the supporting statements; the destination route is the buyer's call, made with the current text in hand. Paperwork is only useful if it is current and specific. A specification without a version, a COA without a lot code, or an allergen statement copied from another product will not survive a review. Keep the document set short, dated and tied to the material that is actually shipping. ## European Union EU practice regards pumpkin seed oil as a traditional food oil rather than a new ingredient, but the buyer should confirm that position for the material and the intended intake. Supplements are covered by Directive 2002/46/EC, which harmonises vitamins and minerals; plant oils fall outside those lists and are dealt with under national supplement rules, so the member state of sale matters. Labelling is governed by Regulation (EU) No 1169/2011. Contaminants are governed by Regulation (EU) 2023/915, which sets limits for lead, cadmium and mercury in supplements and separate limits for oils and fats. For oils intended for direct consumption, the current limits are 2 µg/kg for benzo[a]pyrene and 10 µg/kg for PAH4 as of this review; the consolidated text should be checked before release. Refined oils also carry 3-MCPD and glycidyl-ester limits, which do not apply to a cold-pressed oil that has not been deodorised. Health claims fall under Regulation (EC) No 1924/2006 and must match an entry in the register. ## United States A food use and a supplement use take different routes. As a supplement ingredient, the oil is handled under DSHEA, the manufacturing site follows the dietary-supplement cGMP in 21 CFR 111, and the label uses the Supplement Facts format in 21 CFR 101.36. As a food ingredient, the food-labelling rules apply instead. The buyer's regulatory team decides which route the finished product takes. A structure/function statement requires substantiation and a notification to the FDA within 30 days of marketing, under 21 CFR 101.93; a disease-related claim is not allowed. Federal rules do not set a heavy-metal ceiling for supplements, so state law can become the binding limit; California's Proposition 65 is the one most often encountered, and a lot that passes the EU panel may still need a Prop 65 review. ## United Kingdom Great Britain maintains its own supplement regime. The Food Supplements (England) Regulations 2003, with the Scottish and Welsh equivalents, provide the base, and the GB labelling and claims rules apply as they stand. Pumpkin seed oil is not one of the harmonised vitamins or minerals, so the national position for the product should be checked. Northern Ireland operates under the EU framework through the Windsor Framework, which means a UK-wide launch can face two sets of rules. ## Catalog limits and market limits The values in the specification are commercial release limits, not legal maxima. They are set so that a normal lot has room to meet the destination rules after the finished-product calculation. Specification limits and the evidence a market file should carry | Parameter | Specification | Evidence to hold | Free fatty acid | ≤0.50% | Lot result and method; quality parameter | Peroxide value | ≤5.0 meq O₂/kg | Lot result with test date; p-AV if requested | Moisture | ≤0.1% | Lot result; quality parameter | Lead (Pb) | ≤3 mg/kg | Lot result; finished-product calculation | Cadmium (Cd) | ≤1 mg/kg | Lot result; applicable food category | Mercury (Hg) | ≤0.1 mg/kg | Lot result and method | Arsenic (As) | ≤2 mg/kg | Lot result; agreed limit | PAH4 | Not specified | BaP and PAH4 by a named method, with LOQ | Pesticides | Not specified | Seed-source residue screen, with LOQ The heavy-metal lines follow the supplement limits used in the EU; the destination text and the daily dose can make the effective limit tighter. PAH and pesticide results are absent from the catalog because they depend on how the seed was grown and dried. A cold-pressed oil can carry PAHs from combustion gases used in drying even when the fatty acid profile and the metals are clean. ## Claims and process wording None of the markets discussed here allows a disease-related claim. A statement about omega-6 or essential fatty acids is a nutrition claim and must satisfy the authorised wording and its conditions; in the EU those conditions include amounts per 100 g and per 100 kcal, so the finished product has to be checked, not only the oil. “Cold-pressed” is a process description, not a health claim, and it needs a process record behind it. This page does not reproduce claim text and makes no claim for the oil. A draft label passes the review only when each sentence can be traced to a register entry or a notified statement, with the amount and population that the rule requires. The brand's reviewer signs the label; a COA cannot do that job. ## Documents to keep with the lot Records that support a pumpkin seed oil market file | Record | Content | Purpose | Certificate of analysis | Results, methods, limits, lot code and site | Lot release and traceability | Specification and TDS | Profile, FFA, PV, moisture, pack and storage | The agreed material | Safety data sheet | Handling, storage and hazards | Site and transport | Source statement | Species, plant part and origin | Identity and labelling | Cold-press record | Pressing temperature; no refining | Process wording | Contaminant file | Metals, PAH and pesticides, with LOQs | Market limits | Allergen and GMO positions | For the oil and the finished product | Label review ## Before the first order - The specification version, CAS number and grade are written down. - The COA matches the lot and the pack that will ship. - Source, allergen, GMO and process statements are current. - Metals, PAH and pesticides are calculated on the finished dose. - The label and any claim have been reviewed for the destination. - Change control covers the seed source, the press and the pack. - The quotation and the specification cite the same revision. The catalog specification is on the pumpkin seed oil product page; the lot certificate is explained on the COA page; the analytical evidence is on the identity page. The quality page covers lot release, the EU regulatory library holds the framework notes, and the methods index explains the tests. ### 06 How we prove a pumpkin seed oil lot is the cold-pressed oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/pumpkin-seed-oil/identity/ Reviewed: 2026-11-19 A pumpkin seed oil lot has to satisfy four separate checks before it can be called the declared material: the paperwork names Cucurbita pepo and the cold-pressed grade, the GC profile sits inside the catalog ranges, the sterol and tocopherol patterns are consistent with pumpkin, and the condition figures match the grade. Linoleic acid alone is a weak proof, because sunflower oil can land in the same range. The minor components are what make the identification specific. In one lineThe fatty acid profile narrows the field; the sterol and tocopherol patterns, read with the condition figures, are what separate pumpkin seed oil from a blend. ## Four checks that have to agree Start with the paper: species, plant part, CAS 8016-49-9, grade and lot. Then the fatty acid profile, which places the oil in a family but does not name the species. Then the unsaponifiable fraction, where the sterol and tocopherol patterns carry more specific information. Finally the condition and provenance: FFA, PV, colour, the cold-press record and the retained sample. Each check is easy on its own and harder to satisfy together. A profile can be copied from a specification; a chromatogram with the column and integration cannot. A sterol figure can be quoted; the full pattern compared with a reference oil is harder to invent. A lot code ties the documents to the physical pack. Four identity checks for pumpkin seed oil | Check | Question | Evidence | What it establishes | Paperwork | Is the material named? | Species, plant part, CAS, grade | Identity on paper | Fatty acids | Is the profile plausible? | GC-FID of methyl esters | The oil family | Sterols and tocopherols | Is it pumpkin? | Full patterns against a reference oil | Authenticity | Condition and process | Is it fresh and cold-pressed? | FFA, PV, colour, press record | Handling and grade ## The linoleic-to-oleic ratio is a screen, not a proof With linoleic acid at 45.0–55.0% and oleic at 25.0–35.0%, the ratio of the two usually lands between 1.3 and 2.2. That is a useful first filter, but it is not unique to pumpkin. Sunflower oil can fall in the same window, and a high-oleic sunflower sits well below it; soybean and rapeseed can be blended toward the window. The ratio can exclude some materials; it cannot confirm this one. Specificity comes from the unsaponifiable fraction. Pumpkin seed oil has a recognised Δ7-sterol pattern that includes spinasterol and related sterols, and its tocopherol fraction is dominated by gamma-tocopherol. Sunflower oil also contains Δ7-sterols, notably Δ7-stigmastenol, so no single sterol is decisive. The full sterol pattern, read against a reference oil, plus the tocopherol ratio, is the stronger test. Tocopherols are useful because they do not track the fatty acids. Pumpkin oil is gamma-rich; sunflower oil is alpha-rich. A blend can be tuned to the fatty acid ranges and still show an alpha-tocopherol shift. That shift is often the first sign that the oil is not what the certificate says. ## Diffraction and spectroscopy: what they can and cannot do X-ray diffraction needs a crystal lattice. A liquid oil has none, so the measurement returns a broad halo rather than a pattern that can identify the oil. Diffraction can be useful for a powder-on-carrier product, where the carrier may be crystalline or amorphous, or for detecting a crystalline contaminant. It is not a release test for the oil and cannot measure fatty acids. Infrared spectroscopy is more informative at the functional-group level. It shows the ester carbonyl and the cis double-bond bands, and an oxidised sample develops a broad hydroxyl band from hydroperoxides. That makes it a quick screen for gross oxidation, but it is not a quantitative fatty acid method and a simple scan does not distinguish pumpkin from sunflower. The GC profile and the sterol work remain the identification tools. ## Where substitutions show up Sunflower oil is the usual diluent: it is cheaper and its linoleic acid is close enough to hide inside the catalog range. The fatty acids may look acceptable; the sterols do not. The Δ5-sterol fraction rises, the Δ7-sterols fall, and the tocopherol pattern moves toward alpha. A blend can be built to pass a linoleic specification, so the profile alone is the wrong gate. Substitution routes and the test that reveals each | Route | What changes | Test | Sunflower oil | Δ5-sterols up; Δ7-sterols down; alpha-tocopherol up | Full sterol and tocopherol patterns | Soybean or rapeseed | Fatty acid balance shifts; new sterols appear | GC profile plus sterols | Refined pumpkin oil | Colour and sterols down; FFA and PV lower | Pigments, sterols, press record | Added colour | Green appears without the sterol pattern | Pigment profile, sterols, press record | Oxidised oil | PV and p-AV rise; profile holds | PV, p-AV, sensory Colour is the easiest thing to fake and the weakest evidence. A chlorophyll preparation or a dye can produce a dark green, and a refined oil can be darkened. The sterol and tocopherol patterns are harder to reproduce. Oxidation is the opposite case: the identity tests can pass while the oil is stale, so condition has to be read at the same time. ## Writing identity into the specification Put the identity clauses next to the assay, not in a separate document. Name the species and plant part, the CAS number and the cold-pressed grade. Add the fatty acid ranges with the GC method and the basis. If authenticity matters, add the sterol and tocopherol checks and say that the pattern is compared with a reference oil. Keep FFA, PV, moisture and appearance as condition lines, and require the lot code and retained sample. The same two problems recur in specifications. One is a profile window so narrow that a normal crop fails. The other is a linoleic result with no stated basis, so the buyer cannot tell whether it refers to total fatty acids or to the oil mass. The catalog ranges are wide enough for crop variation; the COA page sets out the reporting format for the basis. ## Questions that produce evidence - Can you provide the GC chromatogram for this lot, including the column, standard and integration? - What are the linoleic, oleic, palmitic and stearic results, and on what basis are they expressed? - Can you show the sterol pattern and the tocopherol result for the same lot? - What were FFA and PV at release, and what storage history does the lot have? - What record supports the cold-pressed claim, and will you agree to a joint retest of the retained sample? A supplier who answers these with documents is giving an identity file. One who answers with a certificate and a percentage is giving a summary. The catalog specification is on the pumpkin seed oil product page; the grade comparison is on the grades page; the flaxseed comparison is on the level-four page. The methods index explains the tests, and the quality page covers lot release. ### 01 What the COA for rice protein actually contains URL: https://nutrition.rainwoodbio.com/products/protein-collagen/rice-protein/coa/ Reviewed: 2026-11-19 The certificate for a rice protein lot reports protein by Kjeldahl, the nitrogen factor applied to it, moisture, ash, appearance, identification, microbiology, the heavy-metal panel and particle size. The protein line is a calculation rather than a direct measurement, so the factor and the basis have to be printed beside it. The figures in the first table belong to the catalog specification; the batch COA speaks for one pack. In one lineA rice protein certificate is only complete when the Kjeldahl figure carries its nitrogen factor and its basis, with moisture, ash and arsenic reported beside it. ## Reading the certificate line by line Work down the sheet and ask three questions of every line: what was measured, how it was measured, and which limit it was released against. A row that reads only “conforms” leaves the reader with a verdict and no evidence. Two rows carry more weight for this material than the rest. The protein row matters because the number is calculated, and the arsenic row matters because rice takes up inorganic arsenic from the paddy soil. Both should be explicit, not folded into a general contaminants line. Identity, protein, moisture and contaminants · rice protein | Parameter | Method | Release limit | Appearance | Visual | Off-white to light tan powder | Identification | Amino acid profile against a reference | Protein profile conform | Protein | Kjeldahl, with the stated factor | ≥80.0% (factor and basis stated) | Moisture | Gravimetric, vacuum oven | ≤7.0% | Ash | Gravimetric, muffle furnace | ≤3.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh ## The nitrogen factor and the basis Protein is not measured directly. The laboratory measures nitrogen, and the protein figure is nitrogen multiplied by a conversion factor. For rice, the cereal factor is 5.95; the general food-labelling factor is 6.25. The same nitrogen result therefore produces two different declarations: a nitrogen content of 12.8% reads 80.0% with 6.25 and 76.2% with 5.95. Neither number is wrong; they answer different questions. The certificate has to say which one it used. The basis is a second variable. “80.0%” without a basis is ambiguous between as-is and dry weight. A lot at 80.0% as-is with 7.0% moisture is 86.0% on the dry basis; at 5.0% moisture the same as-is figure is 84.2% dry. A buyer comparing two quotations on the dry basis and receiving one on the as-is basis will see a difference that no process change explains. Moisture and ash sit beside the protein because all three add up. A lot at 80% protein, 7% moisture and 3% ash leaves about 10% for fat, carbohydrate and fiber, and a high ash result means mineral material is taking mass that the protein figure assumes. The three lines should be read together, not one at a time. ## Release limit versus batch result A release limit is the boundary the lot had to meet; the batch result is what the laboratory actually found. Keep the two in separate columns and name the method. A results column that repeats the specification range has told the reader nothing about the lot. How a results column should read | Parameter | Limit | What the result column shows | Protein | ≥80.0% with the factor and basis named | The measured figure, plus factor and basis | Moisture | ≤7.0% | The measured percentage | Ash | ≤3.0% | The measured percentage | Heavy metals | Per element | A measured value for each element, arsenic included | Particle size | ≥95% through 80 mesh | The measured percentage through the sieve The word “passes” only means something if the reader can rebuild it from the figures printed beside it. Microbiology is evidenced by a count and an absence statement, and heavy metals by a number for each element. A certificate that reports one combined total for heavy metals has concealed the element a rice-derived material is most likely to carry. ## What moves between batches Rice protein moves with the source before it moves with the process. Brown rice, white rice and broken rice give different ash, fiber and colour, and the bran fraction carries more of the inorganic arsenic. A change of rice supply can move the arsenic result without any change in the extraction line. Starch removal moves the protein figure. A less complete starch removal leaves carbohydrate that dilutes the protein and raises the bulk for the same protein dose. Drying and spray-drying move the moisture, the bulk density and the colour; sieving moves the particle-size result. The 80 mesh figure describes the finish, not the chemistry; a new mill or sieve can move it while everything else stays put. Colour is a wide window, off-white to light tan, and a move within it does not mean the lot is a different material. A batch that is markedly darker can point to a hotter drying step or to browning between residual sugars and protein, even when the assay passes. Watch the direction across lots: a protein figure drifting down or a moisture figure drifting up is a process signal, while one result close to a limit is only one data point. The lot code should tie the certificate to the pack, the drum and the retained sample. ## When an outside test earns its place Commission an outside laboratory for a new rice supplier, a first entry into a regulated market, an organic claim or a disputed protein figure. Do not ask it to repeat the supplier's certificate; ask it to answer the open questions. The panel that does that is Kjeldahl with Dumas as a cross-check, an explicit factor, an amino acid profile by HPLC, ICP-MS with arsenic and cadmium reported separately, a starch or total-carbohydrate result, and microbiology. Add a melamine screen if the nitrogen figure looks inconsistent with the amino acid profile, and a soy or wheat ELISA where a shared line is possible. Rice DNA is partly degraded by extraction and spray drying, so a negative rice PCR result is weaker evidence than a positive one; the shared-line record and the cleaning validation carry the rest. Require a detection limit beside every screen, and keep the tested sample against the retained sample. ## What to compare between suppliers Compare six items: rice source and grade; nitrogen factor and basis; protein, moisture and ash; amino acid profile; arsenic and cadmium; mesh and pack. An 80% figure on two quotations can hide a different factor and a different rice source, which means the two powders are not equivalent. Catalog limits are published on the rice protein page. Grades are compared on the grades page, the identity tests are on the identity page, the Kjeldahl method is in the methods library, and the quality page explains how a lot is released. ### 02 Rice protein isolate, concentrate or hydrolysate: choosing a grade URL: https://nutrition.rainwoodbio.com/products/protein-collagen/rice-protein/grades/ Reviewed: 2026-11-19 Rice protein is sold under one name in three forms: a concentrate, an isolate at 80% protein or more, and a hydrolysate with a declared peptide fraction. The source adds a second choice, brown rice, white rice or broken rice, and the physical form decides how the powder runs on a line. The catalog grade is an isolate at ≥80% protein by Kjeldahl, milled to 80 mesh. In one lineThe grade is the protein level plus the source and the form — isolate, concentrate, brown or white rice, powder or granule — before it is the number on the label. ## Why rice protein comes in several grades The grades exist because rice protein is made by removing starch from milled rice. Wet extraction and separation take the protein fraction away from the starch, and how far that removal goes sets the protein level. A concentrate stops earlier; an isolate goes further and lands at 80% or above. A hydrolysate adds an enzyme step that cuts the protein into peptides, which changes the solubility and the label. The source is part of the grade because the bran carries fiber, fat, colour and a larger share of the inorganic arsenic. A brown-rice protein and a white-rice protein at the same protein figure are not the same specification. Neither is an organic isolate and a conventional one, even when the certificate reads the same on the protein line. Writing “rice protein 80%” on a purchase order leaves both the source and the physical form open. The grade is the combination of protein level, rice source and physical form. ## The grades side by side Rice protein grades and what changes between them | Grade | Protein, typical | What remains | Typical use | Watch | Concentrate | 50–65% | Starch, fiber, some fat | Bars, bakery, blended powders | Carbohydrate load; label protein | Isolate | ≥80% | Little starch; ash ≤3% | Capsules, powder blends | Factor and basis; arsenic | Hydrolysate | ≥80%, peptide fraction declared | Free amino acids, salts | Solubility-critical liquids | A different product, not a substitute | Organic isolate | ≥80% | As isolate, certified chain | Organic labels | Certificate scope and mass balance The hydrolysate row is the one that causes the most confusion. A hydrolysate is not a more refined isolate; it is a different specification with a peptide content line, a different taste and a different release specification. A buyer who needs an isolate should not accept a hydrolysate described as “the same protein, only finer”. ## Source, colour and powder behaviour The rice source moves the specification before the process does. Brown rice leaves bran residues that raise the fiber, fat and ash, darken the colour and carry more inorganic arsenic. White rice gives a lower ash and a paler powder. Broken rice is a milling stream rather than a variety, and its quality varies with the source record, so the supplier should name it rather than leave it as “rice”. Rice source and the specification line it moves | Source | What it brings | What to check | Brown rice | Bran residues: fiber, fat, colour, more arsenic | Arsenic, fat, colour | White rice | Lower ash and arsenic, paler powder | Protein, starch removal | Broken rice | A milling stream with variable quality | Source record, contamination The isolate is a fine, off-white to light tan powder at 80 mesh. It disperses in water but does not dissolve: rice protein is mostly glutelin, which is insoluble in water, so a drink made from it is a suspension that settles. That behaviour is a property of the material, not a defect in the lot, and it is why a rice protein drink needs a stabiliser, homogenisation or a hydrolysate. Granulation is a physical grade, not a chemical one. A granulated powder flows better, dusts less and wets more evenly, while the protein, moisture and ash lines stay the same. The particle-size line does change, so a granulated grade needs its own specification and its own sieve result. ## Dose arithmetic and the label Dose arithmetic starts from the protein figure. At 80% protein, 25 g of powder carries 20 g of protein and 31.25 g carries 25 g. A 500 mg capsule holds about 0.4 g of protein, so 20 g of protein would need around 50 capsules; rice protein belongs in powder blends and bars rather than in capsules at a meaningful dose. The arithmetic is a formulation guide, not a recommendation. The factor changes the arithmetic. If the certificate uses 5.95 and the label uses 6.25, the same powder declares more protein than the certificate shows: 20 g by 5.95 becomes 21.0 g by 6.25. A formulator who calculates the serving from the certificate and declares from the general factor will be inconsistent by about 5%. Check the serving size against the ash and moisture lines as well. A 25 g scoop of an 80% isolate is not 25 g of protein, and a high-ash lot delivers less protein per gram of powder. ## What to write into the specification - “Rice protein isolate, source named as brown, white or broken rice.” - “Protein ≥80.0% by Kjeldahl, with the nitrogen factor and the as-is or dry basis on the certificate.” - “Moisture ≤7.0%; ash ≤3.0%; appearance off-white to light tan.” - “Particle size ≥95% through 80 mesh; granulated on request with its own sieve result.” - “Heavy metals Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg, with arsenic and cadmium reported separately.” - “Microbiology APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent.” - “Allergen and gluten statement; organic certificate if the grade is organic.” ## When the isolate is the wrong grade An isolate is the wrong grade when the formula needs a clear solution; the glutelin will not deliver one. It is also the wrong grade when the label needs a complete protein from a single source, because rice is low in lysine and the profile has to be completed elsewhere. A hydrolysate is the wrong substitute when the specification is an isolate, because the peptide fraction is a different line and the two are not interchangeable. The same logic runs the other way. A buyer who needs a hydrolysate for a clear drink should not accept an isolate with a note that “it disperses”, because the suspension will settle and the clarity claim will fail. Catalog details are on the rice protein page; the COA page explains the protein factor; the compliance page covers the market file. Neighbouring materials are described on the pea protein isolate and soy protein isolate pages, and the rice-against-pea comparison is on the level-four page. ### 02.1 Rice protein vs pea protein: two plant proteins, two limits URL: https://nutrition.rainwoodbio.com/products/protein-collagen/rice-protein/grades/rice-protein-vs-pea-protein/ Reviewed: 2026-11-19 Rice protein and pea protein are both plant protein isolates at 80% protein or more, and they are not interchangeable. Rice is low in lysine and comparatively high in the sulfur amino acids; pea is the reverse. Rice is mild and poorly soluble, pea is more soluble and carries a stronger legume flavour. The choice is a profile decision first and a protein-number decision second. In one lineRice protein is low in lysine and mild in flavour; pea protein is rich in lysine and low in the sulfur amino acids, so the choice is a profile decision before a protein-number decision. ## Two amino acid profiles Both materials are sold as 80% protein powders, so the headline number hides the difference that matters. The amino acid profile decides what the protein contributes to a blend, and the two profiles are close to complementary. Typical published amino acid ranges per 100 g of protein | Amino acid | Rice protein | Pea protein | What it means | Lysine | About 3.5–4.0 g | About 6.5–7.5 g | Rice is the limiting amino acid | Methionine and cysteine | About 3.5–4.5 g | About 1.8–2.5 g | Pea is the limiting side | Glutamic acid and aspartic acid | About 26–30 g combined | About 25–28 g combined | Similar; not a separating factor The ranges are published profile values, not batch results, and they move with the rice source and the pea variety. The direction is stable: rice is the cereal that lacks lysine, and pea is the legume that lacks the sulfur amino acids. A blend covers both gaps, and that is the formulator's reason for pairing them. ## What the 80% figure is counting The protein figure is a calculation, and the two materials are usually declared with different factors. Rice is normally calculated with the cereal factor 5.95; pea with the general factor 6.25. A nitrogen content of 12.8% reads 80.0% with 6.25 and 76.2% with 5.95. A rice isolate at 80.0% by 5.95 carries 13.45% nitrogen, while a pea isolate at 80.0% by 6.25 carries 12.80%; the two 80% figures describe different amounts of nitrogen. The practical rule is to put the factor and the basis in the purchase specification for each component, then calculate the blend on nitrogen. The label figure follows one factor for the finished food, so the conversion has to happen before the formula is fixed. ## Allergen and gluten status Neither rice nor pea is on the EU Annex II list of 14 allergens or the US list of major food allergens, as of this review. The difference is the plant family: pea is a legume, and legume cross-reactivity with peanut, lupin and other legumes is documented, so a pea-containing line needs a legume statement and a shared-line record. Rice is a cereal, and its allergen risk is different and much less frequent, but rice allergy exists and a rice protein line still needs a rice statement. Gluten is a separate question. Rice and pea are naturally gluten-free, but neither is certified gluten-free until the lot is tested against the 20 mg/kg threshold used in the EU and the US, and the mill's shared-line record supports the result. An organic claim is a third, separate certificate. A rice protein is often chosen where a legume-free label is wanted; a pea protein is chosen where the lysine figure matters. Neither choice is an allergen-free guarantee. ## Solubility, texture and flavour In a powder blend the difference is texture. Rice protein disperses but does not dissolve, because glutelin is water-insoluble, and it settles with a sandy mouthfeel at high load. Pea protein is more soluble and emulsifies better, but it carries a beany, earthy note that a mild rice protein does not. A bar or a savoury blend can carry either; a flavoured drink usually needs the pea for solubility and the rice to soften the flavour. Both are hygroscopic and both cake, so the pack and the storage condition matter equally. Heat and shear change the texture of either, and a rice protein can thicken or gel in a hot process, while pea protein behaves differently at the same solids. The process trial, not the certificate, decides which one holds the texture. ## How a rice and pea blend is calculated A blend is built on the amino acid gap, then adjusted for flavour and texture. A 70:30 rice-to-pea blend at 80% protein each carries about 0.7 × 3.8 + 0.3 × 7.0 = 4.8 g of lysine per 100 g of protein, against 3.8 g for rice alone and 7.0 g for pea alone. The same arithmetic on the sulfur amino acids runs the other way. The exact ratio belongs to the target profile and the label. Keep the arithmetic on nitrogen, not on the label percentages, and fix the ratio in the specification. A blend that is changed at the weigh-up without a specification change is a different product, and the label, the allergen statement and the protein figure have to follow it. ## When to choose which Choose rice protein when the flavour has to stay mild, when a legume-free label is the priority, and when the lysine gap will be covered by another ingredient. Choose pea protein when lysine density and suspension matter more than the beany note, and when the formula is a drink. Choose the blend when the label needs a complete plant protein and the flavour budget allows both. Neither choice is a substitute for the other at the weigh-up. The two have different protein factors, different solubility and different allergen statements, so a switch is a specification change, not a sourcing change. ## What the label has to show The ingredient list names both materials in descending order by weight, and the protein figure is the sum of the two, calculated on a common factor. The allergen statement follows the plant family: pea is the legume, rice is not. “Plant-based” and “vegan” have no agreed legal definition; they describe the recipe rather than the allergen status or the protein quality. If the label names one of the two, the other cannot be used as a silent top-up. A blend sold as “rice protein” with pea added to lift the lysine is a mislabelled product, even when the total protein is correct. The catalog specifications are on the rice protein and pea protein isolate pages; the soy protein isolate page is the third plant option; the nitrogen-factor arithmetic is set out in the methods library; the quality page explains how a lot is released. ### 03 Rice protein is stable when dry; moisture and heat set the shelf life URL: https://nutrition.rainwoodbio.com/products/protein-collagen/rice-protein/stability/ Reviewed: 2026-11-19 Rice protein is a dry powder and is stable while the moisture stays inside the specification. The failure modes are moisture pickup, caking, heat-driven browning with the sugars left in the powder, and, in a liquid, sedimentation and microbial growth. The pack and the store decide the shelf life, not the release certificate. In one lineDry rice protein holds its protein; moisture pickup, heat and the sugars left in the powder decide whether the powder cakes, browns or fails its assay. ## The powder: moisture, caking and colour The specification allows moisture up to 7.0%, and that is a release gate rather than a storage allowance. An opened pouch takes up moisture from the air, the powder cakes, and the as-is protein figure falls because water is now part of the mass. A 25 kg drum that is opened and resealed repeatedly in a humid store behaves the same way at a slower rate. The powder is hygroscopic and dusty. Keep it in the original foil pouch or an opaque, moisture-barrier container, and close it properly. If a pack has been stored cold, bring it to room temperature before opening; otherwise condensation will form on the powder. A desiccant is useful in a humid climate, but the seal is what does the work. Heat drives browning. Rice protein carries a small residue of reducing sugars and carbohydrate, and a warm, humid store gives the Maillard reaction the conditions it needs. The colour moves from off-white toward tan and the flavour turns biscuit-like before the protein figure moves, so appearance is an early warning rather than a release test. Light is a secondary factor. It is not the photochemical risk that a pigment or a vitamin carries, but a clear container on a bench still adds an exposure and makes the colour harder to read. ## The suspension: the least stable format Rice protein does not dissolve. It disperses into a suspension, because most of the protein is glutelin, and the suspension settles on standing. In a drink, that is a physical stability problem before it is a chemical one: sedimentation, a sandy layer at the bottom and a mouthfeel that changes over the shelf life. Heat and pH change the behaviour. Near the isoelectric point the protein is least soluble, so a drink formulated near that point can throw a sediment faster than one further away; a hot-fill step can gel or thicken the suspension. A formulator can homogenise, add a stabiliser, or move to a hydrolysate, but the bulk-powder result does not predict which of those will work. Microbial growth is the other liquid risk. A protein suspension is a nutrient medium, and a hold tank at ambient temperature is an incubation. Validate the hold time, the preservative system and the process before filling, and test the drink, not only the powder. ## What drives the change Factors that move rice protein during storage | Factor | What it does | Control | Moisture | Caking, dilution of the as-is assay, browning | Sealed pouch; desiccant; dry store | Heat | Accelerates browning and moisture damage | Cool store; controlled process | Oxygen | Lipid oxidation at low fat levels; colour | Low headspace; sealed pack | pH | Lowers solubility near the isoelectric point | Formulate away from the minimum; validate | Microbial load | Growth in a suspension | Hold-time and preservative validation | Shear | Foaming and texture change | Control the mixing and homogenisation These factors are not independent. A warm and humid store causes more damage than either condition alone, and a neutral suspension in a clear bottle combines several of them. Ask instead: which pack, which storage condition and which test panel produced the number? ## A stability protocol for the ingredient The warehouse condition is covered by 25 °C/60% relative humidity over the long term and 30 °C/65% over the intermediate term; 40 °C/75% is the accelerated arm that puts pressure on the pack. A light-exposure arm is optional for this material but useful if the pack is clear. Test protein with the stated factor, moisture, ash, appearance, microbiology and, for a liquid, pH and sediment at each point. The report should print each result and name the pack. A pouch and a drum have different headspace, different opening histories and a different ratio of surface to volume, so the stability file has to match the pack on the order. A summary that says “stable for 24 months” without naming the pack and the condition is a claim, not a result. ## What the finished formula does Capsules and tablets have low water activity, yet the fill is hygroscopic and the shell can pass moisture. Check the fill's moisture and appearance after storage, and check the shell for brittleness. A powder blend adds other hygroscopic ingredients, and the blend's moisture is not the isolate's moisture. A bar is the hardest matrix: water activity, heat and pressure during forming all push browning and hardening. A rice protein bar can stiffen over the shelf life as the protein and the sugars interact, so the bar's texture belongs in the stability plan. A beverage adds pH, heat and sediment. Bulk stability only sets the baseline; the matrix and the process settle the rest, and the formulator owns the overage decision, if one is needed. ## Who sets the shelf life There is no single shelf-life number to publish for rice protein: the pack and the store decide it. The retest period assigned to a pack belongs in the specification, backed by the stability file for the same pack. Without a named pack, a storage condition and a test panel, a number is not a shelf life. When the retest period ends, the retained sample is tested again before any extension. A figure from a drum does not transfer to a repacked pouch, and an extension without a new result is a guess. For the standard packs, see the rice protein page; for pack sizes and lead time, the MOQ page; for the release tests, the COA page; for the assay, the methods library; for release itself, the quality page. ### 04 Rice protein: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/protein-collagen/rice-protein/moq/ Reviewed: 2026-11-19 Rice protein is packed from 1 kg: a foil pouch for trials and a 25 kg fiber drum for production, with a 1–7 day lead time on the standard grade. A quotation is only usable when it names the grade, the rice source, the nitrogen factor and basis, the pack, the destination and the documents. In one lineOne kilogram is the lot-tied trial pack; the 25 kg fiber drum is the production unit, and the nitrogen factor belongs in the quotation before the quantity. ## Why the minimum is 1 kg A kilogram is the smallest unit sold on its own. It covers a bench trial, a retained sample and an outside protein check, travels as a parcel, and carries a lot code that ties the trial to its certificate. Anything below 1 kg is cut from a bigger lot and repacked, which adds handling, breaks the link to the original pack and makes the protein figure harder to follow. The 25 kg drum is the production unit: fewer handling steps per kilogram, but more inventory held for longer. A rice protein order is not just a quantity. The grade and the source change the specification, and the factor changes the protein figure, so the quotation has to carry both before the pack size is agreed. ## Packs and formats Standard rice protein packs | Pack | Net | Where it fits | Handling note | Foil pouch | 1 kg | Trial work and samples | Moisture barrier; reseal the opened pack | Fiber drum | 25 kg | Production runs | Liner sealed; lot code on the drum | Granulated powder | On request | Better flow, less dust | Its own sieve result | Organic grade | On request | Certified organic labels | Certificate scope Granulation and organic certification change the specification; they are not packing options. If the line needs a freer-flowing powder, raise it before the quotation, because the sieve line and the documents change. An organic grade needs a certificate that names the product and the operator, and the mass balance has to close from the rice to the drum. ## Lead time and dispatch The standard grade carries a 1–7 day lead time from confirmation. Picking, documents and dispatch happen inside that window; transit, customs and the customer's release sit outside it. A granulated or organic grade takes longer; the quotation should say so on its own line. Get the dispatch date as well as the lead time. A drum usually moves on a pallet and a pouch as a parcel, and the Incoterm fixes who books the freight and handles entry formalities. The documents belong with the lot, not in a later email. ## What a quotation has to state A quotation is comparable only when it answers six points: - Product and grade. Rice protein isolate, with the rice source named and the protein factor and basis stated. - Specification. Protein, moisture, ash, mesh, heavy metals and microbiology. - How much, in what. Pouch, drum, granulated or organic, with the net weight stated. - Where it is going. Country, delivery point and Incoterm. - Documents. COA, TDS, SDS, allergen and gluten statements, organic certificate if claimed. - What it is for. Supplement or food, and the market where the finished product will be sold. A quotation that leaves out the factor and the rice source cannot be compared. The same 80% figure can describe two different powders. Commercial terms are not listed here; they are set out in the quotation. ## A sample has to carry its lot Qualify from the 1 kg pack: test protein with an explicit factor, moisture, ash, the amino acid profile and arsenic before scaling, then keep a retained sample from the same pack. Sample, certificate and quotation should carry one lot code. Without a lot code the sample is a demonstration, and a demonstration cannot be qualified. A smaller bench quantity is a repack cut from a drum; record it as its own lot and document the split instead of presenting it as the catalog pack. The bench sample and the production drum may not come from the same lot, so plan for two. ## Terms to settle before the first order Commercial terms, Incoterm, pack, lead time and documents are on the quotation. The quality terms belong in the same conversation: specification revision, COA per lot, retained sample, retest period, change control and the nitrogen factor used for release. Settle the quality agreement before the first production order rather than after the first dispute. Replacement and return terms sit in the quotation and the quality agreement. If a lot misses the agreed specification, the retained sample and a joint re-test settle it; a photograph does not. Put the referee laboratory, and who pays for it, into the quality agreement. For the catalog, see the rice protein page. Release tests are on the COA page, the market file on the compliance page, the assay in the methods library, and the quality page covers release. ### 05 Where rice protein is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/protein-collagen/rice-protein/compliance/ Reviewed: 2026-11-19 In the EU, the US and the UK, rice protein follows the ordinary food route as of this review: it is not a novel food, an additive or a drug, and no pre-market approval stands behind a lot. The rice-specific questions are the arsenic and cadmium results, the protein basis behind the label, and the allergen and gluten position. The buyer's regulatory team confirms the destination route; this page lists the checks. In one lineRice protein is an ordinary food ingredient in the main markets; what the file must show is the rice-specific arsenic and cadmium results, the allergen position and the protein basis. ## Three questions, three owners The file turns on three questions. Can the material be sold as food where it is going? Does the pack tell the truth about the source, the protein and the allergens? Do the contaminant results hold at the dose the consumer will take? Ownership is split: the importer carries the status question, the recipe owner carries the label, the dose calculation carries the limit, and the brand carries the claims. Rice adds a material-specific question. The plant takes up inorganic arsenic and cadmium, and both have entries in contaminant law written for rice. A generic supplement limit is not the right gate; the rice entries and the finished-product dose are. ## European Union and the United Kingdom Rice has been eaten in Europe for centuries, so it sits outside the novel-food route as of this review. A new extraction process or a new enzyme step is a different question and should be run past the current novel-food catalogue before launch. Supplements fall under Directive 2002/46/EC. Regulation (EU) No 1169/2011 governs the label. Annex II lists cereals that contain gluten; rice is a cereal but not one of those, so a rice protein does not inherit a gluten allergen label from its source. The ingredient name still has to appear. If the line also handles wheat or soy, the cross-contact position has to be written down. Contaminants are in Regulation (EU) 2023/915. Its rice entries for arsenic and cadmium are specific, and which one applies depends on the form and the use of the product. The buyer's regulatory team matches the entry; the supplier supplies the result. An organic lot also needs Regulation (EU) 2018/848 and a certificate whose scope covers the product. Great Britain keeps retained law: the Food Information Regulations 2014 for allergens, the Food Supplements (England) Regulations 2003 and their devolved counterparts for supplements, and domestic contaminant limits rather than 2023/915. Northern Ireland follows the EU rules. The two routes are checked one at a time. ## The United States Rice protein can be a food ingredient or a dietary ingredient in the US, and the route changes the paperwork. Sold as a supplement, it brings the facility under 21 CFR 111 and the label under 21 CFR 101.36, and the supplier should state its basis for sale. FALCPA's major-allergen list covers milk, egg, fish, crustacean shellfish, tree nuts, peanuts, wheat, soybeans and sesame. Rice is absent, so it appears in the ingredient statement without a major-allergen emphasis. A shared line with wheat or soy still needs a cross-contact control, and an advisory statement only where the cleaning validation supports it. The panel's protein number comes from nitrogen times a factor. The general factor is 6.25; the rice factor is 5.95. Reconcile the certificate and the panel on nitrogen before the label goes to print. ## Contaminants and limits The table below is where a supplement file begins. The dose converts a drum result into a supplement result, and the rice entries may be tighter than the catalog line. Contaminant limits and the rice-specific question | Element | Catalog limit | Rice-specific issue | Evidence required | Lead (Pb) | ≤3 mg/kg | General contaminant | Lot result, method and finished-product calculation | Arsenic (As) | ≤2 mg/kg | Inorganic arsenic is taken up by the plant; rice entries apply | Inorganic arsenic, reported apart from total arsenic | Cadmium (Cd) | ≤1 mg/kg | Cadmium is taken up by the plant; rice entries apply | Lot result and the entry that applies | Mercury (Hg) | ≤0.1 mg/kg | General contaminant | Lot result and method The catalog figures are upper bounds, not goals. A lot at 2 mg/kg arsenic leaves little room in a 30 g dose, and the rice entries can be lower again. Set the internal limit from the finished-product calculation and ask for inorganic arsenic separately from total arsenic. ## Label and claims This site makes no disease claim, and food law in these markets does not allow one for a food or a supplement. Protein claims are nutrient-content claims with thresholds. In the EU, “source of protein” means 12% of energy and “high protein” 20%, measured on the product as sold. In the US, “good source” covers 10–19% of the Daily Value and “high” or “excellent source” starts at 20%, against a 50 g Daily Value. “Plant-based” and “vegan” have no agreed legal definition here; they describe the recipe, not the allergen status or the protein quality. “Gluten-free” does have a threshold, 20 mg/kg in the EU and the US, and a rice protein is only gluten-free on test if the mill also handles wheat. “Hypoallergenic” is not a defined food-label term in the EU and needs the buyer's review before it goes on a pack. The label can state the protein quantity and the source; it cannot state an effect in the body. ## What travels with the lot - Lot COA: protein with its factor and basis, moisture, ash, mesh and the contaminant panel. - Technical data sheet naming the grade, the rice source and the nitrogen factor. - Safety data sheet, 16 sections. - Allergen statement: rice, plus any shared gluten or soy line. - Non-GMO declaration and origin record. - Organic certificate with the product and operator named, if an organic claim is made. - Gluten test result if a gluten-free claim is made. - Inorganic arsenic and cadmium results, reported separately. ## Checklist before the first order - Is the grade and rice source named, and does the label protein figure use the same factor as the certificate? - Is the arsenic result for inorganic arsenic, and does it fit the finished-product dose? - Is rice named on every pack, and is the shared-line position documented? - Is every claim a nutrient-content claim, and is a gluten-free claim supported by a test? - Is the document pack complete for the destination, including the organic certificate if claimed? Catalog limits are on the rice protein page. The COA page explains the certificate, the identity page covers the analytical evidence, the methods library holds the protein methods, and the quality page describes the release file. ### 06 How we prove a rice protein lot is rice protein URL: https://nutrition.rainwoodbio.com/products/protein-collagen/rice-protein/identity/ Reviewed: 2026-11-19 A rice protein lot earns its name from four consistent results: the document names the source and the grade, the nitrogen figure carries a stated factor, the amino acid profile matches rice, and the ash, moisture and starch results close the mass balance. A protein percentage alone cannot separate an isolate from rice flour with added nitrogen. The identity file is the set of measurements that makes the substitution visible. In one lineIdentity rests on measurements that agree: the nitrogen figure with its factor, an amino acid profile that matches rice, an ash and moisture balance, and a starch check that rules out rice flour. ## The four identity checks Naming the material on a certificate is not the same as proving it. The four checks below ask different questions and each needs its own evidence; an answer to the first alone describes the documents, not the material. Four checks for rice protein identity | Check | The question it answers | Evidence | What it establishes | Document | Is the source and grade named? | Name, rice source, factor, specification | Paperwork only | Nitrogen | Is the protein figure real? | Kjeldahl, with Dumas as a cross-check | Nitrogen, not protein | Amino acids | Is the protein rice? | Amino acid profile by HPLC | A species-consistent pattern | Mass balance | Is it diluted? | Moisture, ash, starch and fat | Consistency of the numbers ## The two ratios that carry the check The first ratio is the nitrogen factor. A lot at 80.0% protein by 6.25 contains 12.8% nitrogen; the same nitrogen reads 76.2% by 5.95. The certificate has to name the factor, and two suppliers have to be compared on the same one. A “higher protein” quote can be the same nitrogen multiplied by a larger factor. The second ratio is the amino acid pattern. Rice protein is high in glutamic acid and aspartic acid and low in lysine; soy protein is higher in lysine. A simple check is the lysine-to-glutamic-acid ratio, roughly 0.2 for rice and above 0.3 for soy. A rice lot that drifts toward the soy ratio is not necessarily adulterated, but it is a signal to look at the full profile and the source record. Both ratios are cheap to compute from a certificate that already reports the profile. Neither is a substitute for the full amino acid result, and neither is a release test on its own. ## What diffraction can and cannot show Diffraction measures order in the solid, not the species in the bag. A spray-dried rice protein is amorphous, so its pattern is a broad halo; a sharp crystalline pattern points to a crystalline diluent, a mineral filler or a salt, not to rice protein. That makes XRD a useful screen for a physical adulterant and a poor identity test for the protein itself. A laboratory can compare the halo with a reference, but the halo is not unique to rice. The species question needs the amino acid profile and, where the DNA survives processing, a rice-specific PCR. A certificate that reports only “XRD conforms” has shown that the powder is amorphous, not that it is rice protein. ## What adulteration looks like Common rice protein substitutions and their warning signs | Substitute | The effect | Warning sign | Check | Rice flour or starch | Dilutes protein; raises carbohydrate | Protein low; starch high; iodine colour | Starch or total carbohydrate, iodine | Soy protein | Raises lysine and nitrogen | Lysine-to-glutamic ratio up | Amino acid profile, soy ELISA or PCR | Wheat gluten | Raises protein; adds gluten | Gluten ELISA positive | Gluten ELISA, PCR | Nitrogen spiking | Raises Kjeldahl nitrogen without protein | Profile too low for the nitrogen | LC-MS/MS screen, nitrogen balance | Mineral filler | Raises ash | Ash above 3%; sharp XRD peaks | Ash, XRD Colour proves the least. Off-white to light tan covers a wide range, and a bleached or dyed powder can sit inside it. The stronger signals are the amino acid profile, the ash and the starch result. A certificate that reports appearance and protein but not the profile has left the most likely substitution untested. Melamine and urea are the classic nitrogen spikers, and both inflate the protein figure without adding amino acids. A profile whose total amino acids fall well short of the reported protein is the warning; a targeted LC-MS/MS screen confirms it. The screen is not a routine release test, but it belongs in the file for a new or unfamiliar source. ## What the identity clause should say - “Rice protein isolate, with the rice source named as brown, white or broken rice.” - “Protein ≥80.0% by Kjeldahl, with the nitrogen factor and the as-is or dry basis stated.” - “Amino acid profile reported against a reference; lysine and glutamic acid included.” - “Moisture ≤7.0%; ash ≤3.0%; starch or total carbohydrate reported.” - “Heavy metals Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg, with inorganic arsenic and cadmium reported separately.” - “No rice flour, soy, wheat or nitrogen-rich additive above the agreed limit.” ## Five questions for the supplier - What is the rice source, and is it brown, white or broken rice? - Which nitrogen factor and basis are printed on the certificate? - Can you provide the full amino acid profile, not only the protein percentage? - What are the moisture, ash, starch and inorganic arsenic results for this lot? - Will you re-test the retained sample jointly if a result is challenged? Five answers build an identity file; one assay percentage does not. For the catalog, see the rice protein page; for the certificate layout, the COA page; for source and form, the grades page; for the methods, the methods library; for release, the quality page. ### 01 What the COA for sea buckthorn oil actually contains URL: https://nutrition.rainwoodbio.com/products/fatty-acids/sea-buckthorn-oil/coa/ Reviewed: 2026-11-19 The certificate for a sea buckthorn fruit oil lot reports the full GC fatty-acid profile, with palmitoleic acid at 25.0–35.0%, oleic acid at 20.0–30.0% and linoleic acid at 30.0–40.0%, together with free fatty acid ≤1.00%, peroxide value ≤5.0 meq O₂/kg, moisture ≤0.1%, the heavy-metal panel and microbiology. The plant part — fruit or seed — decides what the profile should look like, so the certificate has to name it. The limits below are the catalog specification; the batch certificate confirms the pack in front of you. In one lineA sea buckthorn certificate is a fatty-acid profile plus an oxidation status: the GC profile says which oil it is, and the free fatty acid and peroxide values say how it has been kept. ## Reading the certificate line by line A certificate earns its place when each line can be checked without a phone call: the test, the method, the limit and the measured result, each in its own column. A row that says only “conforms” gives a conclusion and withholds the evidence. The profile is the identity line; the oxidation numbers are the condition line. A lot can match the palmitoleic range and still be months old, or be fresh and be the wrong oil. Identity, oxidation and contaminants · sea buckthorn fruit oil | Parameter | Method | Release limit | Appearance | Visual | Orange-red to dark red; clear to slightly hazy | Identification | GC fatty-acid profile | Conforms to the reference profile | Palmitoleic acid (C16:1) | GC of fatty acid methyl esters | 25.0–35.0% | Oleic (C18:1) and linoleic (C18:2) | GC of fatty acid methyl esters | 20.0–30.0% and 30.0–40.0% | Free fatty acid | Titration, expressed as oleic acid | ≤1.00% | Peroxide value | Iodometric titration | ≤5.0 meq O₂/kg | Moisture | Karl Fischer | ≤0.1% | Heavy metals | ICP-MS | Each element reported: lead ≤3, arsenic ≤2, cadmium ≤1, mercury ≤0.1 (mg/kg) | Microbiology | Total plate count, absence tests | Total count ≤1,000 cfu/g; yeasts and moulds ≤100 cfu/g; E. coli and Salmonella not detected ## The GC basis, the plant part and the percentage The profile comes from a gas chromatogram of the methyl esters: the oil is transesterified, the esters separate on a capillary column and the peaks are read against a standard. Laboratories normally report area percent after normalisation, which is close to mass percent but not identical; the certificate should say which basis was used. Normalisation means the reported acids add to 100%, which is convenient and slightly dangerous: a profile that lists only the three headline acids can hide the rest. Ask for every major peak, palmitic and alpha-linolenic included. Fruit oil and seed oil differ most in palmitoleic acid and in alpha-linolenic acid, and a blend of the two lands between them. The free fatty acid is expressed as oleic acid and measures how much oil has been split from its glycerol backbone by water and lipase. The peroxide value, in milliequivalents of active oxygen per kilogram, measures the first stable products of oxidation. Both are titrations, and both should be named as methods rather than printed as bare numbers. ## The limit, the result and the method The release limit is the boundary the lot was accepted against; the batch result is what the laboratory measured. Both belong in the table, in their own columns, with the method beside them. A result column filled with the specification range is a copy of the gate, not a result. The result column, line by line | Parameter | Limit | Measured result | Palmitoleic acid | 25.0–35.0% | A measured percentage with the GC basis stated | Oleic and linoleic acid | 20.0–30.0% and 30.0–40.0% | Measured percentages for each acid | Free fatty acid | ≤1.00% | A measured percentage expressed as oleic acid | Peroxide value | ≤5.0 meq O₂/kg | A measured figure, with the method named | Moisture | ≤0.1% | A measured percentage | Heavy metals | Per element | A figure in mg/kg for each element, not a total The two freshness lines deserve the closest reading. A peroxide value of 4.8 against a limit of 5.0 has passed with no headroom left for transit; a free fatty acid close to 1.00% points to damaged fruit or a wet press. A result at the edge is not a failure, but it invites a question about the next lot. ## What shifts from lot to lot Harvest year, fruit ripeness, whether the press takes pulp alone or whole berries, and the extraction temperature all move the profile. Palmitoleic acid is a trait of the pulp, so it stays steady when the raw material and the plant part are held constant and moves quickly when seed oil enters the batch. Alpha-linolenic acid is the mirror image: low in a pulp oil, higher when seed oil is present. The oxidation numbers move with time and handling rather than with the recipe. Peroxide value climbs in a warm store and faster in a part-used container; free fatty acid climbs when water is present. Colour moves with the carotenoid content, which varies with ripeness and extraction. A shift inside the orange-red window is not an identity failure, but a trend across lots is worth reading. ## When an outside laboratory is worth it An outside laboratory earns its fee in four situations: a new source, a first shipment into a regulated market, a disputed identity, or a claim that the material is fruit oil rather than seed oil or a blend. The useful panel is the full fatty-acid profile, free fatty acid, peroxide value, moisture, heavy metals and microbiology. Add the p-anisidine value when the question is an off-note: the peroxide value falls as the first products break down, while the secondary products keep climbing. For an identity dispute, add the unsaponifiable fraction; the sterol and tocopherol profiles differ between fruit and seed oil and between a fresh and a refined oil. A carotenoid scan is the direct check on the colour, because a dye can reproduce the appearance without reproducing the pattern. Keep the sample tested and the sample retained in one chain of custody. ## What to put side by side Put six lines side by side: the plant part named on the document; the full profile with its GC basis; free fatty acid and peroxide value with their methods; moisture; the contaminant and microbiology results; and the pack size, lot code and fill date. Two quotations that agree on palmitoleic acid but disagree on the plant part are not describing the same oil. Three further questions separate a food-grade offer from a cosmetic one. Is the oil refined, and which steps were used? Has any tocopherol preparation been added to slow oxidation, and is it declared? Was the pack nitrogen-flushed, and how much headspace does it carry? None of these appears in a headline figure, and each one changes the shelf life and the label. The catalog entry is on the sea buckthorn oil product page. The tests that separate fruit oil from seed oil are on the identity page, the grade choices on the grades page, the storage behaviour on the stability page, the chromatographic method in the methods section, and the release workflow on the quality page. ### 02 Fruit oil or seed oil: choosing a sea buckthorn grade URL: https://nutrition.rainwoodbio.com/products/fatty-acids/sea-buckthorn-oil/grades/ Reviewed: 2026-11-19 Sea buckthorn is sold as fruit oil, extracted from the pulp and skin, and as seed oil, from the seeds; the catalog entry here is the fruit oil, with palmitoleic acid at 25.0–35.0%. The two come from one berry and are not interchangeable: the fruit oil is orange-red and palmitoleic-rich, the seed oil is yellow and dominated by linoleic and alpha-linolenic acid. The third choice is the format — neat oil in an amber bottle or a drum, or a powder on a carrier. In one lineFruit oil and seed oil are two products from one berry: the part of the plant decides the fatty-acid profile, the colour and the ingredient name before any grade decision. ## Why one berry gives two oils The berry is processed for juice, and the oil comes out of the fractions that remain. The pulp and skin carry an orange-red oil that is rich in palmitoleic acid; the seeds carry a yellow oil in which linoleic and alpha-linolenic acid dominate. The seed is a by-product of the juice line, which is one reason the two oils have separate supply chains and separate specifications. Extraction adds a second variable. Cold pressing keeps the carotenoids and the colour but leaves more free fatty acid and sediment; supercritical carbon dioxide gives a darker, more concentrated extract; solvent extraction gives a higher yield and brings a residual-solvent question. A refined oil is paler, lower in free fatty acid and lower in colour, and it can no longer be checked by eye. The name on the purchase order is the first trap. “Sea buckthorn oil” does not say which fraction, and some suppliers sell a whole-berry oil that sits between the two. The fatty-acid profile is the most direct statement of what was extracted. ## The two oils side by side Sea buckthorn fruit oil and seed oil | Property | Fruit oil | Seed oil | Raw material | Pulp and skin after juice extraction | Seeds separated from the pomace | Colour | Orange-red to dark red | Yellow to orange | Palmitoleic acid (C16:1) | 25.0–35.0% (catalog) | A minor fraction, well below the fruit-oil range | Linoleic acid (C18:2) | 30.0–40.0% (catalog) | A major fraction | Alpha-linolenic acid (C18:3 n-3) | Low | A major fraction | Oleic acid (C18:1) | 20.0–30.0% (catalog) | Present; not the marker | Usual format | Softgel fill, oil blend | Softgel fill, cosmetic and food oil | Label name | Sea buckthorn fruit oil | Sea buckthorn seed oil The table is the argument for naming the part of the plant in the specification. A buyer who orders on palmitoleic acid alone will receive a fruit oil; a buyer who orders on alpha-linolenic acid will receive a seed oil. A blend can be made to hit a palmitoleic figure, but it will carry seed-oil alpha-linolenic acid at the same time, and the full profile shows it. ## Colour, clarity and handling The fruit oil is orange-red to dark red because of its carotenoids, and the catalog appearance is clear to slightly hazy. Haze is not automatically a defect: an unrefined oil can hold fine sediment and wax, and a cold store can crystallise part of the glycerides. Warming the container gently and mixing restores a uniform oil, but repeated warming cycles use up shelf life, so bring the whole pack to working temperature once rather than warming a scoop at a time. Both oils are insoluble in water and soluble in fats and organic solvents. Density is below that of water, near 0.9 g/mL, so a 1 kg bottle holds roughly 1.1 L and a softgel fill quoted in milligrams is not a volume. The oils are light-sensitive, and the fruit oil's colour is the visible part of that sensitivity: carotenoids are consumed as the oil oxidises, so a fading colour is one of the earliest signs that a pack has been open too long or stored too warm. ## Working out the label figure The label figure for an oil is a mass of oil, not a mass of any single fatty acid. If a softgel carries 500 mg of fruit oil and the lot profile is 30% palmitoleic acid, the capsule carries about 150 mg of palmitoleic acid; with a 25% lot it carries 125 mg. The calculation uses the measured lot figure, not the middle of the catalog range, and it is arithmetic rather than a recommended intake. Format changes the arithmetic. A powder on a carrier is declared by oil load, so 1,000 mg of a 40% powder carries 400 mg of oil; the same oil load in neat form weighs 400 mg. A blend with a neutral oil dilutes every marker in proportion: a 50:50 blend of fruit oil and sunflower oil lands near 15% palmitoleic acid, and the label has to name both oils. None of these conversions repairs a specification that did not state the plant part. ## Specification lines to agree - “Sea buckthorn (Hippophae rhamnoides L.) fruit oil” — with the botanical name and the part of the plant. - “Palmitoleic acid 25.0–35.0%, oleic 20.0–30.0%, linoleic 30.0–40.0% by GC; all major acids reported.” - “Free fatty acid ≤1.00% as oleic acid; peroxide value ≤5.0 meq O₂/kg; moisture ≤0.1%.” - “Appearance orange-red to dark red, clear to slightly hazy; no added colour.” - “Refining status stated; any added tocopherol declared with its level.” - “Pack 1 kg amber bottle or 25 kg HDPE drum; nitrogen flush and headspace agreed in writing.” We supply the fruit oil. The seed oil is a separate purchase with its own profile, and a whole-berry oil is a third specification again; neither should be swapped in without written change control and a fresh label review. ## When the fruit oil is the wrong choice The fruit oil is the wrong choice when the label is built on alpha-linolenic acid, when a pale oil is needed in a clear capsule, or when the specification was written around seed oil. It is also the wrong choice when the colour is treated as a defect rather than a property, because the carotenoids that produce it are part of what the buyer is paying for and refining them out changes the ingredient. If the label is built on GLA rather than on a sea buckthorn acid, the starting point is the evening primrose oil powder, which is specified on GLA and oil load. The catalog specification is on the sea buckthorn oil product page. The comparison with evening primrose is on the fruit oil versus evening primrose page, the analytical evidence on the identity page, the storage behaviour on the stability page, the chromatographic method in the methods section, and the release workflow on the quality page. ### 02.1 Sea buckthorn fruit oil vs evening primrose oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/sea-buckthorn-oil/grades/sea-buckthorn-oil-vs-evening-primrose-oil/ Reviewed: 2026-11-19 Sea buckthorn fruit oil is specified by palmitoleic acid, at 25.0–35.0% in the catalog, and evening primrose oil by gamma-linolenic acid (GLA), at 8.0–11.0% on the oil in the evening primrose powder here. They are different marker fatty acids from different plants, and the catalog forms differ too: the sea buckthorn entry is a neat oil, while the evening primrose entry is a 40% oil powder. A label figure or a capsule weight does not transfer between them. In one lineSea buckthorn fruit oil is a palmitoleic oil and evening primrose is a GLA oil: the marker fatty acid, the colour and the label arithmetic all differ. ## Two oils, two marker acids Sea buckthorn fruit oil comes from the pulp and skin of Hippophae rhamnoides, a berry-bearing shrub. Its marker is palmitoleic acid, a 16-carbon monounsaturated fatty acid that is concentrated in the pulp; the same oil also carries oleic and linoleic acid at meaningful levels. Evening primrose oil comes from the seed of Oenothera biennis, and its marker is GLA, an 18-carbon fatty acid with three double bonds. Linoleic acid is the largest single fraction in evening primrose oil, so a GLA figure and a linoleic figure are both expected on its certificate. The two oils cannot be checked by the same line: a certificate that reports palmitoleic acid says nothing about GLA, and the reverse is also true. The plant, the plant part and the marker acid belong together in the specification. ## The two specifications side by side Sea buckthorn fruit oil and evening primrose oil powder | Property | Sea buckthorn fruit oil | Evening primrose oil powder | Botanical source | Hippophae rhamnoides L., fruit pulp and skin | Oenothera biennis L., seed | Marker fatty acid | Palmitoleic acid 25.0–35.0% by GC | GLA 8.0–11.0% on the oil by GC | Other major acids | Oleic 20.0–30.0%; linoleic 30.0–40.0% | Linoleic acid is the largest fraction; oleic present | Catalog form | Neat oil | 40% oil powder on a modified starch carrier | Colour | Orange-red to dark red | White to pale yellow powder | Pack | 1 kg amber bottle; 25 kg HDPE drum | 1 kg foil pouch; 25 kg fiber drum | Oxidation gate | Peroxide value ≤5.0 meq O₂/kg | Peroxide value ≤8.0 meq/kg; p-anisidine ≤20.0 | Label name | Sea buckthorn fruit oil | Evening primrose oil The table also shows why a straight comparison of peroxide limits misleads. The sea buckthorn limit is written for a neat oil; the evening primrose limit is written for a powder in which the oil is dispersed in a matrix. The numbers are not interchangeable, and the basis of each result — on the oil or on the powder — has to be asked for. ## What the colour does and does not prove The orange-red colour of sea buckthorn fruit oil comes from carotenoids in the pulp. It is a useful visual marker and a weak identity test: a dye can copy it, a refined oil can lose it, and a blend with seed oil can dilute it. In an opaque capsule the colour is hidden, so the check belongs on the bulk oil. Evening primrose oil is pale yellow, and its powder is white to pale yellow; a bright orange evening primrose powder is a question, not a rejection. Colour is also a condition signal. Carotenoids are consumed as the oil oxidises, so a sea buckthorn pack that has faded from deep red to orange has lost part of its protection and part of its appearance. The colour change is not a substitute for the peroxide value, but it is visible before the certificate is opened. ## Dose and label arithmetic The label figure for either product is a mass of oil or powder, not a mass of the marker fatty acid. A softgel carrying 500 mg of sea buckthorn fruit oil at 30% palmitoleic acid carries about 150 mg of palmitoleic acid. A capsule carrying 500 mg of evening primrose oil at 10% GLA carries about 50 mg of GLA. Those are arithmetic examples, not recommended intakes, and both should use the measured lot figure rather than the middle of the range. The evening primrose entry adds a step because it is a powder: 1,000 mg of a 40% oil powder carries 400 mg of oil, and at 10% GLA on the oil that is about 40 mg of GLA. Calling 1,000 mg of powder 1,000 mg of oil overstates the oil two and a half times. The sea buckthorn entry has no such step, but a milligram figure is not a volume: at about 0.9 g/mL, 1,000 mg of oil is close to 1.1 mL. ## Oxidation behaviour and the pack Both oils are rich in unsaturated fatty acids and both fail by oxidation. Evening primrose oil is dominated by linoleic acid, which reacts quickly; sea buckthorn fruit oil carries palmitoleic acid and a substantial linoleic fraction, so it oxidises too. The sea buckthorn pack is an amber bottle or an HDPE drum, with light and headspace as the controlled variables. The evening primrose pack is a foil pouch or a fiber drum, and the starch matrix slows the access of oxygen and light to the oil without stopping it. The test panel follows the pack. For the neat oil, peroxide value, p-anisidine value, free fatty acid and colour are read on the oil; for the powder they are read on the extracted oil or on the powder, and the report should say which. A powder can pass a limit on the powder while the oil inside the matrix has oxidised. ## When to choose which Choose sea buckthorn fruit oil when the label names the fruit oil or its palmitoleic figure and an orange-red oil is acceptable in an opaque capsule. Choose evening primrose oil powder when the label names GLA and a free-flowing powder suits the capsule or stick line. The two are not substitutes: a swap changes the marker acid, the label name, the mass per dose and the method. A blend of both is possible, and it is not a way to avoid the choice. The label then names both oils, the profile is a mixture of palmitoleic and GLA, and the identity work needs the full fatty-acid profile plus the sterol data to show both sources. Each oil also brings its own oxidation load, so the blend's peroxide value is read on the blend. The sea buckthorn specification is on the sea buckthorn oil product page, and its grade choices are on the grades page. The evening primrose item is on the evening primrose oil powder page; the analytical methods are in the methods section; the release process is described on the quality page. ### 03 Sea buckthorn oil: what limits the shelf life URL: https://nutrition.rainwoodbio.com/products/fatty-acids/sea-buckthorn-oil/stability/ Reviewed: 2026-11-19 Sea buckthorn fruit oil fails by oxidation rather than by microbial spoilage: the peroxide value rises first, the p-anisidine value follows, and the free fatty acid rises when water is present. Heat, light, oxygen and trace metals drive the process, so the pack and the storage condition decide the shelf life. A sealed, dark, cool pack with little headspace is the specification that does the work. In one lineSea buckthorn oil fails by oxidation, not by spoilage: the peroxide value records the first products, the p-anisidine value the second, and the pack decides how fast both climb. ## The neat oil in the pack The catalog limits are moisture ≤0.1%, free fatty acid ≤1.00% and peroxide value ≤5.0 meq O₂/kg. The moisture limit matters because water in an oil drives hydrolysis: the triglyceride splits, free fatty acid rises and the oil begins to taste soapy. The effect is slow in a dry, sealed pack and much faster in a part-used container that has drawn damp air. A drum or bottle opened in a humid room and closed again carries that air with it. The pack is the barrier. The 1 kg amber bottle blocks visible and ultraviolet light, which protects the carotenoids that give the oil its colour; the 25 kg HDPE drum is opaque but has a higher oxygen transmission rate through the wall, so the headspace and the closure do more of the work. A nitrogen flush reduces the oxygen available at fill, and the fill height should leave as little headspace as the filling line allows; a drum filled short oxidises faster than one filled full. Cool storage slows every reaction, and it has one side effect worth planning for: part of the oil can crystallise at low temperature and the pack can look cloudy or grainy. That is reversible with gentle warming and mixing, but the warming should be done once for the whole pack. Each cycle adds heat and air contact, and a bottle that is warmed for every scoop spends its shelf life in the worst conditions. ## The oil in a matrix: softgel, blend and emulsion In a softgel the oil is protected from light and from most of the oxygen by the shell, and the blister or the bottle protects the shell. The weak points move: the shell can lose or gain moisture, gelatin can cross-link and become insoluble, and a seam can fail. The stability question becomes a question about the shell and the blister as much as about the oil, and the test has to be run on the finished capsule. In an emulsion the oil is dispersed into small droplets, and the interfacial area between oil and water is enormous compared with a bulk pack. Oxygen, metal ions and pH act at that interface, so an oil that is stable in a bottle can oxidise quickly in a drink. The emulsifier, the antioxidant partitioning between phases and the dissolved oxygen at fill all change the rate. In a blend, the marker fatty acid is diluted in proportion to the other oils. That protects the label arithmetic but not the chemistry: the sea buckthorn fraction still oxidises, and the blend's peroxide value is read on the blend. Record whether the oxidation values are reported on the oil or on the finished blend, because the two are not comparable. ## What pushes the oil toward rancidity Factors that move sea buckthorn fruit oil during storage | Factor | What it does | Control | Oxygen | Forms hydroperoxides; peroxide value rises | Nitrogen flush, low headspace, tight closure | Light | Accelerates oxidation; bleaches carotenoids | Amber glass or opaque pack; dark store | Heat | Raises the rate of oxidation and hydrolysis | Cool store; controlled process temperature | Trace metals | Iron and copper catalyse oxidation at low levels | Stainless contact; avoid metal scoops | Moisture | Hydrolysis; free fatty acid rises | Dry pack; keep the container closed | Time and headspace | More oxygen and more reaction time | First-in, first-out; small packs for trials The factors reinforce one another: a warm, bright store with a half-empty drum is worse than the sum of the separate effects. The useful question is therefore not whether the oil is stable, but stable in which pack, at which temperature and for how long. ## Designing the stability trial A stability plan for this oil is a grid: the pack, the condition, the sampling points and the tests, fixed before the first sample is placed. Warehouse conditions at 25 °C and 60% relative humidity, and an accelerated arm at 40 °C and 75%, are the usual pair; a light-exposure arm is essential here because a dark incubator cannot see the failure that light causes. For an oil, humidity matters less than oxygen and light, but it still acts on the closure and the label. Test peroxide value, p-anisidine value, free fatty acid, moisture, appearance and colour at each point, and add the fatty-acid profile at the start and the end to see whether the unsaturated acids have moved. Report the individual results, not only a pass statement, and identify the pack and the lot family. For a softgel, an emulsion or a powder, repeat the work in the finished format and at the process heat load. ## What the matrix does to the rate The matrix, the process and the pack all alter the speed of the reaction. A capsule with a dry fill holds little free water, but moisture can migrate from the shell and the excipients, and the fill takes up oxygen each time the bottle is opened. A drink brings water, pH, dissolved oxygen and often a heat step. A powder on a carrier exposes a much larger surface of oil to air, which is why an encapsulated powder needs its own oxidation data and its own peroxide and anisidine limits. An overage does not repair a pack that lets oxygen in, and a flavour does not repair an oil that has already oxidised. If the formula needs a declared tocopherol preparation to slow oxidation, that addition belongs on the label and in the specification; it is not a substitute for a sealed, dark pack. ## How a retest period is assigned No single shelf-life figure is published for sea buckthorn fruit oil, since the pack and the storage condition are what set it. A sealed pack held cool and dark is commonly assigned a retest period of 12–24 months, but the number on the specification governs and rests on stability data for that pack. Once a pack is opened, the in-use period is shorter and should be stated separately. Once the retest period is reached, re-test the retained sample before any extension, and do not carry a bulk figure across to a repacked bottle or a customer's own container. Pack sizes are on the product hub, the oxidation lines on the COA page, pack and lead time on the MOQ page; the peroxide and anisidine methods are set out in the methods section, and release handling on the quality page. ### 04 Sea buckthorn oil: MOQ, packing and ordering URL: https://nutrition.rainwoodbio.com/products/fatty-acids/sea-buckthorn-oil/moq/ Reviewed: 2026-11-19 The MOQ for sea buckthorn fruit oil is 1 kg, supplied in an amber bottle; the production pack is a 25 kg HDPE drum. Lead time is 1–7 days for the standard pack, and a powder on a carrier is quoted separately. A firm quotation needs six details: the plant part, the specification, the quantity and pack, the destination and Incoterm, the documents, and the intended market. In one lineOne kilogram is the minimum because it is the smallest pack that can be filled, sealed, sampled and traced as a lot without decanting a drum. ## Why the minimum is 1 kg A 1 kg bottle covers a bench trial, a retained sample and an independent fatty-acid test. It is small enough to ship as a parcel, which matters when a formulator needs material before the production plan is fixed, and it is a commercial unit with its own lot code rather than a scoop taken from a drum. The bottle is filled and closed at the supplier, so the headspace and the closure are known quantities. Below 1 kg the oil is usually drawn from a larger lot and repacked. Handling goes up, the oil meets air, the original pack identity is gone and tracing the lot becomes harder, while the oil itself is unchanged. The 25 kg drum is the bulk unit: fewer handling steps per kilogram, but it ties up stock and sits open for longer. The minimum is a pack decision, not a volume incentive. ## Packs and formats Standard sea buckthorn fruit oil packs | Pack | Net weight | Typical use | Notes | Amber glass bottle | 1 kg | Trial, sample, small batch | Light barrier; fill to the shoulder; screw closure | HDPE drum | 25 kg | Production | Opaque; inner liner and tamper-evident closure | Powder on carrier | On request | Tablets, stick packs | Oil load declared; own specification | Nitrogen-flushed pack | On request | Long hold | Reduced headspace oxygen; agreed in writing The glass bottle is the better oxygen and light barrier; the drum is the practical bulk container, but its wall lets a slow amount of oxygen through and its closure is only as good as the liner. Whichever pack is ordered, the fill height matters: an oil filled to the shoulder of a bottle leaves little headspace, while a drum filled short carries an air pocket that grows as the oil is drawn down. Ask for the fill weight and the headspace to be stated on the specification. ## Lead time and dispatch Dispatch for the standard pack is quoted at 1–7 days after the order is confirmed. The clock covers picking, paperwork and handover to the carrier; transit time, customs and the customer's own quality release sit outside it. A powder on a carrier, a nitrogen flush or a non-standard pack adds time, and the quotation should show that as a separate line rather than leave it to the dispatch week. Get the dispatch date in writing, not just the lead time. A drum usually moves on a pallet while a bottle goes as a parcel, and the Incoterm fixes who books the freight and who clears the entry. Send the documents with the lot rather than after it: oil that reaches the warehouse ahead of its certificate waits for release and ages while it waits. ## What a quotation has to state Six details make a quotation firm enough to compare: - Material and plant part. Fruit oil or seed oil, written with the botanical name so there is no doubt which fraction is quoted. - Specification. The fatty-acid profile, free fatty acid, peroxide value, moisture, appearance and any added preparation, with the revision number. - Volume and pack. How many 1 kg bottles or 25 kg drums, and whether a powder on a carrier or a flushed pack is needed. - Delivery and trade term. Destination country, delivery point and the Incoterm the buyer wants to work on. - Paperwork. Which certificates, data sheets and market statements have to travel with the lot. - Use and market. Supplement or food, and the country where the finished product will be sold. Without the plant part and the market, two quotations cannot be compared: the same oil may fit one market and fall outside the file in another, and the paperwork is part of what is being offered. Commercial terms appear on the quotation, not here. ## The sample is a lot, not a demonstration The 1 kg bottle is the qualification sample. Test the fatty-acid profile, free fatty acid, peroxide value, moisture and colour before scaling, and keep a retained sample from the same bottle in a cool, dark place. The lot code should be the same on the bottle, the certificate and the quotation. A sample without a traceable lot is a demonstration, not a qualification. If the project needs less than a kilogram for a bench trial, discuss it before ordering. A split from a drum is a repack with its own handling history; record it as a repack in its own right. A bench sample and a production drum are not guaranteed to come from the same lot, and a bench result should not be carried across to the drum. ## Terms to settle before the first order The commercial side of the offer — trade term, pack, dispatch window and documents — sits on the quotation. The quality side should be agreed at the same time: which specification revision applies, how the certificate is issued per lot, how the retained sample is kept, what retest period is claimed, and how a change to source or process is notified. Putting that in a quality agreement before the first production order is cheaper than arguing about it after the first delivery. If a lot misses the agreed specification, the route is the retained sample and a joint re-test, not a photograph of the bottle. Settle in advance which laboratory both sides accept and who carries the cost of the referee analysis; returns and replacements then follow the quotation and the quality agreement. The product hub carries the catalog specification; the COA page lists the release tests; the stability page covers storage; the compliance page covers the market files; the quality page describes the release workflow. ### 05 The regulatory file for sea buckthorn fruit oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/sea-buckthorn-oil/compliance/ Reviewed: 2026-11-19 Sea buckthorn (Hippophae rhamnoides) fruit oil is supplied as a food and supplement ingredient, and the buyer's regulatory team confirms the route for the destination. The file contains the specification, the lot certificate, the contaminant results, the allergen and carrier statements, and the label review. A history of use in one market is not a market authorisation in another. In one lineThe oil's history of use is not a market authorisation: the file has to show the specification, the contaminants, the carrier and the label for the destination. ## What the file contains A regulatory file has to answer four things at once: what the material is, which version of the specification is on the order, which lot the certificate covers, and which rules the finished product meets in the destination. Each of those is a different document, and a folder of undated PDFs does not answer any of them reliably. For an oil, three statements carry more weight than they do for a powder. The first is the part of the plant, because fruit oil and seed oil are different ingredients with different names. The second is the refining and extraction history, because a solvent-extracted or refined oil brings a residual-solvent and a process question. The third is the carrier, because the powder-on-carrier format is the point at which an allergen can enter a product that is otherwise a single oil. ## European Union The EU side of the file starts with the specification, the contaminant results and the label. The general food law framework in Regulation (EC) No 178/2002, the food information rules in Regulation (EU) No 1169/2011, the contaminant maximum levels in Regulation (EU) 2023/915 and the pesticide residue regime in Regulation (EC) No 396/2005 apply alongside whatever specific route the ingredient has. If the novel-food question is live, Regulation (EU) 2015/2283 and the EU novel-food catalogue are the texts the buyer's team works through; consumption history in one member state is not proof for another. Directive 2002/46/EC provides the supplement framework, but ingredients other than vitamins and minerals are mostly a member-state matter. That is why the destination belongs in the specification conversation rather than the shipping one. As of this review, use the consolidated texts and check them again before the order. ## United States In the United States the question is which dietary ingredient or food substance is being sold and what supports its use. DSHEA and the Federal Food, Drug, and Cosmetic Act set the supplement framework; 21 CFR 111 covers manufacturing practice, and 21 CFR 190.6 is the notification route a buyer evaluates when the ingredient has no listed basis. A structure or function statement for a supplement is handled under 21 CFR 101.93 and is kept separate from any disease claim. If the destination use is a conventional food rather than a supplement, 21 CFR 117 preventive controls and the labelling rules in 21 CFR 101 apply instead. The supplier should state the basis it relies on and identify the document behind it; the buyer decides whether that basis covers the finished product. ## United Kingdom Great Britain and Northern Ireland do not share one file. For Great Britain, the current GB register and GB labelling rules apply, with the Food Information Regulations 2014 among the instruments to check; Northern Ireland continues under the EU framework. The buyer's team records which regime the destination falls under and files the evidence with the order. ## Contaminants and limits A contaminant result is measured on the ingredient but judged on the finished product. The table is a starting point for the supplement file; the destination text and the daily dose give the final number. Contaminant limits to confirm for the dose | Parameter | Usual supplement reference | Evidence to keep | Lead (Pb) | 3.0 mg/kg in the finished supplement | Lot result with method, the limit and the dose calculation | Cadmium (Cd) | 1.0 mg/kg in the finished supplement | Lot result and the exception that applies, if any | Mercury (Hg) | 0.10 mg/kg in the finished supplement | The measured figure and the analytical method | Arsenic (As) | Customer or market limit | The agreed limit and method, written into the certificate | PAH4 | Market text on request | Results for the four markers where a level is set | Mineral oil hydrocarbons | Customer limit | MOSH and MOAH data where the buyer's file asks for them | Pesticide residues | Regulation (EC) No 396/2005 | Residue statement and the scope of the screen | Residual solvents | Depends on the extraction route | Solvent named and limit stated, if a solvent was used For an oil the oxidation values sit in the same file as the contaminants: a rancid lot is a quality failure even when every metal result is compliant. The peroxide and p-anisidine values are on the certificate, and the file should show how they were converted to the finished dose. ## Naming the oil and making a claim Describing the oil and quoting its fatty-acid composition is a statement about the material, not a health claim. Anything beyond that is a separate review: in the EU, Regulation (EC) No 1924/2006 and the EU Register of nutrition and health claims govern the wording; in the US, the structure or function rules do. A phrase such as an omega-7 figure or a “high in” statement is checked before printing. No claim is approved by a certificate, and no wording change alters the specification. This page makes no disease-related claim for the oil; the brand's reviewer signs off the label wording for the product, the form and the market. ## The document set - Specification with a version number and the plant part named. - Certificate of analysis for the lot, with methods and results. - Technical data sheet and safety data sheet. - Allergen statement, including the carrier for a powder format, and a GMO statement. - Origin, refining and extraction statement; residual-solvent statement where relevant. - Contaminant data, including PAH and mineral-oil results where the market file asks for them. - Packaging declaration and a stability summary for the pack being bought. ## Checklist before the first order - The specification version, the botanical name and the plant part are on the order. - The COA, TDS, SDS, allergen, GMO, origin and refining statements are filed. - Contaminant results are converted to the finished-product dose. - The label and any claim have been cleared for the destination. - The source, the extraction route and the pack sit under change control. - The quotation, the specification and the certificate carry the same version. For the catalog specification, start at the sea buckthorn oil product page. What a lot certificate should report is set out on the COA page, the analytical evidence on the identity page, the fruit-oil and seed-oil split on the grades page, and how a lot is released on the quality page. ### 06 How we prove a sea buckthorn lot is fruit oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/sea-buckthorn-oil/identity/ Reviewed: 2026-11-19 A sea buckthorn fruit oil lot is identified by its full GC fatty-acid profile, not by a single palmitoleic figure: the ratio of palmitoleic acid to the other C16 and C18 acids, the unsaponifiable fraction and the colour have to agree with the declared part of the plant. The catalog profile is palmitoleic acid 25.0–35.0%, oleic 20.0–30.0% and linoleic 30.0–40.0%. A blend can be built to land inside that range, so the profile is read as a shape rather than as one number. In one lineIdentity is the whole fatty-acid profile, not the palmitoleic figure: the sum of the major acids, the minor acids and the unsaponifiable fraction have to agree with a fruit oil. ## The identity layers Naming the right oil on the certificate is not the same as proving it. Each layer below answers a different question and needs its own result; a supplier who replies with the name and the palmitoleic figure has covered the first layer only. Layers of sea buckthorn fruit oil identity | Layer | What it asks | Analysis | What it establishes | Document | Is the plant part named? | Name, botanical name, part of plant | Only what the paper says | Chromatography | Is the fatty-acid shape right? | GC of the methyl esters, all major acids | The oil family and the fraction | Unsaponifiable | Is it a genuine fruit oil? | Sterol and tocopherol profile | Source and refining history | Colour | Is the carotenoid pattern present? | Spectrophotometry or HPLC | The pulp fraction, not a dye | Condition | Is it fresh and undiluted? | Free fatty acid, peroxide, p-anisidine, moisture | Consistency of the numbers ## The ratios that carry the identity Palmitoleic acid is a 16-carbon monounsaturated acid, and in sea buckthorn it is concentrated in the pulp. Its saturated counterpart is palmitic acid; the two are read together, so the ratio between them is more informative than either number alone. The second useful ratio is palmitoleic to linoleic acid. A fruit oil sits in a band where palmitoleic is high and linoleic is also high; a seed oil reverses that relationship, and a blend lands between the two. The ratios are read with the absolute values, never instead of them. A high-oleic oil such as macadamia carries palmitoleic acid at a meaningful level, commonly around 17–22%, below the fruit-oil range but close enough that a blend can be built to land inside it. Such a blend pulls oleic acid up and linoleic acid down, so the whole profile stops fitting even when the palmitoleic figure is in range. The same logic catches a sunflower or soy dilution: linoleic rises, palmitoleic falls and the sterol profile changes. No single ratio should be used as a pass or fail gate without a reference oil analysed in the same laboratory on the same day. The ratios are a screening tool; the release decision rests on the full profile against a reference, plus the unsaponifiable data when the source is new. ## Why X-ray diffraction does not identify an oil X-ray diffraction needs a crystalline solid: the beam is scattered by ordered planes in a lattice, and a liquid oil has no such order. A diffraction pattern from an oil therefore says nothing about which oil it is. The test belongs to the powder-on-carrier format, where it can show the crystallinity of the carrier, and to a crystallised stearin or wax fraction isolated from the oil; it does not belong on a routine release line for a liquid. If a supplier offers “XRD conforms” for a liquid oil, ask what was actually analysed and against which reference. A pattern for the carrier is not a pattern for the oil, and a pattern for a wax isolate describes a fraction, not the lot. For this product, the identity budget is better spent on the full GC profile, the unsaponifiable fraction and the carotenoid scan. ## What adulteration looks like Substitutions to watch for and their warning signs | Adulterant | How it is used | Warning sign | Check | Seed oil | Dilutes the pulp fraction | Palmitoleic down; alpha-linolenic up | Full GC profile | Macadamia or high-oleic oil | Lifts palmitoleic into range | Oleic high; linoleic very low | GC profile and ratios | Sunflower or soy oil | Cheap dilution | Linoleic up; palmitoleic down; sterols change | GC, sterol profile | Added colour | Copies the orange-red appearance | Colour without the carotenoid pattern | Carotenoid scan | Old or oxidised oil | Passes the profile, fails the condition | Peroxide and anisidine high; colour faded | PV, p-AV, appearance | Mineral oil or MCT | Cheap neutral diluent | C8 and C10 peaks for MCT; unsaponifiable matter for mineral oil | GC profile, unsaponifiable matter Colour is the weakest signal on its own. Orange-red to dark red covers a wide range, a dye can reproduce it, and a refined oil can lose it. The stronger signals are the shape of the GC profile, the sterol and tocopherol pattern, and the mass balance between the fatty-acid result, the unsaponifiable fraction and the oxidation values. ## Identity lines for the specification - “Sea buckthorn (Hippophae rhamnoides L.) fruit oil”, with the part of the plant written out. - “Palmitoleic 25.0–35.0%, oleic 20.0–30.0%, linoleic 30.0–40.0% by GC; every major acid reported.” - “Unsaponifiable matter, sterol and tocopherol profiles reported on request.” - “Free fatty acid ≤1.00%; peroxide value ≤5.0 meq O₂/kg; p-anisidine value on request; moisture ≤0.1%.” - “Carotenoid pattern consistent with a fruit oil; no added colour.” - “Any added tocopherol declared with its level; refining and extraction route stated.” ## Five questions for the supplier - Which part of the plant is this lot — fruit, seed or whole berry — and is it named on the certificate? - Can you provide the full GC profile with every major acid and the sum, not only the palmitoleic percentage? - What are the unsaponifiable, sterol and tocopherol results, and which laboratory produced them? - What are the peroxide, p-anisidine and free fatty acid results for this lot, and on what basis were they reported? - If the result is challenged, will you re-test the retained sample jointly with us? Those answers, taken together, make an identity file; any one percentage on its own does not. For the catalog specification, start at the product hub. The COA page shows where each figure sits on a lot certificate; the grades page sets out the fruit-oil and seed-oil split; the methods section explains the chromatographic separation; the quality page describes release. ### 01 What the COA for black seed oil actually contains URL: https://nutrition.rainwoodbio.com/products/fatty-acids/black-seed-oil/coa/ Reviewed: 2026-11-19 A certificate for cold-pressed black seed oil has to answer two questions that are easy to confuse: what the oil is and what condition it is in. The fatty acid profile by GC and the thymoquinone (TQ) figure by HPLC describe the material; free fatty acid, peroxide value and moisture describe how it has been handled. The limits below are the catalog specification, and each batch COA is the record of one lot against them. In one lineThe fatty acid profile says what the oil is; the thymoquinone figure, free fatty acid and peroxide value say whether it is the lot that was bought. ## The certificate as a test report A certificate is useful when a second laboratory can repeat every line: the parameter, the method, the limit and the basis. A row that says only “conforms” asks the reader to trust a conclusion without the evidence behind it. The table below is the release specification for the cold-pressed oil, not a batch result. Release specification for cold-pressed black seed oil | Parameter | Method | Limit | Basis | Appearance | Visual | Dark amber to brownish; clear to slightly hazy | Oil as sold | Linoleic acid (C18:2) | GC-FID of fatty-acid methyl esters | 50.0–60.0% of total fatty acids | Oil as sold | Oleic acid (C18:1) | GC-FID of fatty-acid methyl esters | 20.0–25.0% of total fatty acids | Oil as sold | Thymoquinone | HPLC with UV detection | 0.5–2.0% | Oil as sold | Free fatty acid | Titration as oleic acid | ≤0.50% | Oil as sold | Peroxide value | AOCS Cd 8b-90 or ISO 3960 | ≤5.0 meq O₂/kg | Oil as sold | Moisture | Karl Fischer | ≤0.1% | Oil as sold | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Oil as sold | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Oil as sold Identification is the profile, not a single percentage. The full GC trace should match the reference oil, and the chromatogram, column, esterification route and standard belong with the result. Two C18 acids can merge on a poor separation, and the two headline figures can then agree while the trace does not. ## Fatty acid share, oil mass and the thymoquinone figure Fatty acid results are normalised to total fatty acids. A linoleic figure of 55% means 55% of the fatty acid fraction, not 55 g per 100 g of oil; the glycerol that carries the acids is not part of the percentage. The conversion to oil mass is close to 0.95 for a typical triglyceride, but the certificate and the label must use the same convention. Thymoquinone is reported on the oil as sold, usually as a percentage or as mg/g. One percent is 10 mg/g. The figure depends on the HPLC standard, the extraction and the detection wavelength, so the method line matters as much as the number. A TQ result without a standard and a chromatogram is a claim, not a measurement. Free fatty acid is titrated as oleic acid and reports the unesterified fraction. Peroxide value is per kilogram of oil and covers hydroperoxides. Moisture is Karl Fischer on the oil as sold. These are three different bases, and a certificate that mixes them creates errors that survive into the label. ## Release limit versus batch result The release limit is the boundary for the lot; the batch result is what the laboratory measured on that lot. They should never share a cell. If the result column repeats the range, the reader has learned the specification but nothing about the lot. What the lot record should show for each test | Test | Release limit | Record for the lot | Linoleic and oleic acids | 50.0–60.0% and 20.0–25.0% of total fatty acids | Measured values, basis and chromatogram | Thymoquinone | 0.5–2.0% | Measured value, method, standard and chromatogram | Free fatty acid | ≤0.50% | Measured value as oleic acid | Peroxide value | ≤5.0 meq O₂/kg | Measured value, method and test date | Moisture | ≤0.1% | Measured value by Karl Fischer | Metals and microbiology | Element- and test-specific | A result per element; counts and absence statements Peroxide value is the line that needs a test date. Hydroperoxides break down into aldehydes as an oil ages, so PV can fall while the oil becomes more rancid; p-anisidine value (p-AV) shows the secondary products and is worth adding when oxidation is the question. FFA and PV close to their limits are not automatic rejects, but they leave less room for storage. ## What moves between batches Seed origin, season and pressing temperature move the profile and the TQ figure. A cold-pressed oil is unrefined, so FFA and colour pass into the bottle; filtration removes sediment but does not undo oxidation. A lot at one edge of the linoleic range is usually at the opposite edge of the oleic range, and that is normal crop variation. TQ is the most variable line. It falls with heat, light and storage time, and it is lower in a refined oil because deodorisation removes it. A TQ figure near the bottom of the range can be a fresh oil from a low-TQ seed lot or an older oil that has lost TQ; the volatile profile and the storage history separate the two. Colour is the weakest signal. Dark amber to brownish covers a wide window, and a duller tone can mean oxidation, a different press batch or a different seed. The lot code on the certificate, the bottle or drum and the retained sample should match. ## When to order an outside test Order an independent test for a new source, a first import, a claimed grade, a suspected blend or a disputed result. Target the gap rather than repeating the whole certificate: a full GC-FID run with the chromatogram for the profile, an HPLC run with the standard for TQ, sterol and tocopherol patterns for authenticity, FFA and PV with p-AV for condition, and metals, pesticides and PAH for the seed source. Ask for the limit of quantification beside every “not detected”. Without it the line describes the method, not the sample. The sample tested should be the retained sample, and the report should name the lot. ## What to compare between suppliers Two certificates can quote the same linoleic acid and describe different oils. Compare the botanical name, the grade, the TQ figure with its method, the condition figures with their test date, the authenticity evidence and the lot trace. A refined oil with a lower TQ can pass the same linoleic range as a cold-pressed oil, and the two are not the same purchase. The catalog specification is on the black seed oil product page; the grade choice is on the grades page; the authenticity tests are on the identity page. The methods index explains the GC and HPLC work, and the quality page covers lot release. ### 02 Cold-pressed, refined or standardised: choosing a black seed oil grade URL: https://nutrition.rainwoodbio.com/products/fatty-acids/black-seed-oil/grades/ Reviewed: 2026-11-19 Black seed oil is sold cold-pressed and unrefined, refined, organic and standardised to a thymoquinone (TQ) figure, and they are not interchangeable. The grade decides the TQ content, the colour, the flavour and the label, and it should be chosen before the specification is written. The catalog material is the cold-pressed, unrefined oil. In one lineCold-pressed, refined and standardised black seed oils differ in thymoquinone, colour and the label, and the grade should be chosen before the specification is written. ## Why one seed gives several grades Nigella sativa seed oil is a fixed oil pressed from the seed. The volatile oil, obtained by steam distillation, is a different product with a much higher TQ concentration, and it is not a substitute for the fixed oil in a softgel or an oil blend. Within the fixed oil, the grade is set by the pressing and finishing route: cold-pressed and unrefined, refined, organic, or standardised by blending with a high-TQ fraction or the isolate. Each route changes what the certificate can say. Cold pressing keeps the oil in contact with the seed at a moderate temperature and avoids solvent. The result is a dark, flavoursome oil that carries the seed's minor components, including TQ. Refining adds steps such as neutralisation, bleaching and deodorisation; it lowers FFA and PV and gives a paler, milder oil, but deodorisation also removes part of the TQ and the volatile fraction. The two grades can meet the same linoleic range and still be different materials. ## The grades side by side Black seed oil grades and what each one is | Grade | What it is | Thymoquinone | Colour and flavour | Typical use | Cold-pressed, unrefined | Pressed without solvent; filtered | 0.5–2.0% by HPLC (catalog) | Dark amber; strong, peppery | Softgels, oil blends | Refined | Neutralised, bleached, deodorised | Lower; deodorisation strips TQ | Pale yellow; mild | Neutral blends | Organic cold-pressed | Cold-pressed; certified organic | Follows the seed lot | As cold-pressed | Organic labels | Standardised | Oil blended to a declared TQ figure | Declared; may sit inside or above the natural range | Depends on the base oil | TQ-declared products | Volatile oil | Steam-distilled essential oil | Much higher than the fixed oil | Pale to amber; intense | Not a fixed-oil substitute | Powder on carrier | Oil on a carrier, on request | Declared as oil load | Powder | Sticks, capsules The organic grade is a certification and segregation question, not a different fatty acid profile. The standardised grade is a label question: if TQ was added, the oil is no longer simply cold-pressed and unmodified, and the specification and the label should say so. The volatile oil is a different product category, not a stronger version of the fixed oil. ## Colour, clarity and handling The cold-pressed oil is dark amber to brownish and clear to slightly hazy. A fine sediment can settle over time and is not a defect; mix the container before sampling. The oil is insoluble in water and soluble in fats and organic solvents, and its viscosity is higher than that of a light seed oil. A cold store can make it thick or cloudy, so warm the sample gently and inspect it again before rejecting it. TQ is a yellow crystalline solid at room temperature, with a melting range around 45–47 °C. In the oil it is dissolved in the triglycerides, so no crystals are visible; a few crystals in a cold bottle can be the oil's wax fraction rather than TQ. The refined grade is paler and milder and has less of the seed's aroma. The volatile oil is much less viscous and evaporates on exposure, which is one reason it is handled in a closed container. ## TQ arithmetic and the label The arithmetic is simple and often done wrong. One gram of oil at 1.0% TQ carries 10 mg; at 2.0% it carries 20 mg. A 500 mg softgel at 1.0% carries 5 mg. To deliver 50 mg from a 1.0% oil takes 5 g of oil, more than a single softgel can hold; that is why standardised oils and isolates exist. These are arithmetic examples, not a recommended dose. On the label, the oil is declared by mass, and the TQ figure may be declared as a component. If TQ is added, the label and the specification should say so; a standardised oil is not the same as a cold-pressed oil with its natural TQ. The fatty acid percentages are composition statements, not a health claim. The dosage form narrows the choice. A softgel takes the oil directly and needs a fill weight that fits the shell. A stick pack or a capsule with a powder fill needs an oil powder on a carrier, and the oil load becomes part of the specification. A beverage needs an emulsion or a powder, because the oil does not dissolve in water. ## What to write into the specification - “Nigella sativa L. seed oil, cold-pressed, unrefined; botanical name and plant part stated.” - “Linoleic acid 50.0–60.0% and oleic acid 20.0–25.0% of total fatty acids by GC.” - “Thymoquinone 0.5–2.0% by HPLC, with the method and the standard named.” - “Free fatty acid ≤0.50%; peroxide value ≤5.0 meq O₂/kg; moisture ≤0.1%.” - “Appearance: dark amber to brownish, clear to slightly hazy.” - “Grade: cold-pressed and unrefined, as named in the purchase order.” - “Pack, storage condition and retest period stated.” The grade belongs in the first line of the specification, not in a note. A purchase order that names “black seed oil” without the grade leaves the supplier free to deliver a refined oil when a cold-pressed oil was intended, and the certificate may still pass the fatty acid ranges. The catalog material is the cold-pressed, unrefined oil. The other grades in the table are separate specifications with their own labels; a switch to one of them is a new purchase, not a packing change. ## When another grade is the right purchase If the formula needs a neutral, pale oil with little taste, the refined grade fits; the cold-pressed oil will colour and flavour the fill. If the label promises a cold-pressed oil, the refined grade is the wrong purchase even though it is cleaner on FFA and PV. If the dose needs a TQ figure that the oil cannot carry at the fill weight, a standardised oil or an isolate is the route, and the label and the regulatory file change with it. If the format is a powder, the oil-on-carrier product is a different specification; the evening primrose oil powder page shows how a carrier route is described. The new specification should name the carrier, the oil load and the TQ figure, and it should not be treated as a packing change. The catalog specification is on the black seed oil product page; the tests are on the COA page; the oxidation limits are on the stability page; the oil-versus-isolate comparison is on the level-four page. ### 02.1 Black seed oil vs thymoquinone isolate: the oil and the molecule URL: https://nutrition.rainwoodbio.com/products/fatty-acids/black-seed-oil/grades/black-seed-oil-vs-thymoquinone/ Reviewed: 2026-11-19 Black seed oil and thymoquinone isolate are not two strengths of the same ingredient. The oil is a cold-pressed triglyceride matrix that carries thymoquinone (TQ) at 0.5–2.0% together with linoleic and oleic acids; the isolate is a purified crystalline compound, specified by assay and dosed in milligrams. The choice changes the dose arithmetic, the stability risks, the label and the regulatory route. In one lineBlack seed oil delivers thymoquinone inside a fatty acid matrix; the isolate delivers the single molecule, and the two are different ingredients before they are different doses. ## The oil and the molecule Nigella sativa seed oil is pressed from the seed and is a fixed oil. The isolate is thymoquinone, C10H12O2, CAS 490-91-5, a yellow crystalline solid with a melting range around 45–47 °C. The oil is liquid at room temperature because its triglycerides are liquid, and the TQ is dissolved in them; the isolate is a solid that is practically insoluble in water and soluble in ethanol and other organic solvents. The oil also contains linoleic acid at 50.0–60.0% and oleic acid at 20.0–25.0% of total fatty acids, plus palmitic and stearic acids and minor sterols and tocopherols. The isolate contains TQ and its impurities, not the fatty acid matrix. That is the first difference, and it is not a concentration difference. ## The two side by side Black seed oil and thymoquinone isolate compared | Property | Black seed oil | Thymoquinone isolate | Form | Cold-pressed oil | Crystalline solid | TQ content | 0.5–2.0% by HPLC (catalog) | Assay, often 98% or higher by HPLC | Matrix | Triglycerides, sterols, tocopherols, volatiles | The single compound and its impurities | Dose unit | Grams of oil | Milligrams of TQ | Solubility | Soluble in fats and organic solvents; insoluble in water | Practically insoluble in water; soluble in ethanol and oils | Identity tests | GC fatty acids, HPLC TQ, volatiles, sterols | HPLC assay, melting range, NMR, XRD The table also shows why the two are not interchangeable in a formula. The oil brings flavour, colour and a fatty acid load that the formulator has to accept. The isolate brings a small mass, a defined assay and a content-uniformity task, but not the oil's matrix. ## Dose arithmetic The arithmetic is the reason the two are confused. One gram of oil at 1.0% TQ carries 10 mg; at 2.0% it carries 20 mg. A 500 mg softgel at 1.0% carries 5 mg. To deliver 100 mg from a 1.0% oil takes 10 g of oil, which is not a single capsule. An isolate at 98% needs about 102 mg of powder for the same 100 mg of TQ. Neither figure is a recommended dose. They show that the oil is a matrix ingredient and the isolate is a concentrate. If the label declares TQ in milligrams, the oil route needs a large fill weight or a standardised oil; the isolate route needs an assay and a uniformity check. The dose decision belongs with the formulator and the label reviewer, not with the certificate alone. ## Stability follows the format The oil fails by oxidation: peroxide value and p-anisidine value rise, free fatty acid can rise with moisture, and TQ falls with light and heat. The oil matrix also protects the TQ to some extent, because it dilutes the compound and limits its exposure to air. The isolate is a crystalline solid that is volatile with steam, sensitive to light and heat, and can be lost from a powder blend or deposit on the packaging. A blend of the isolate needs content uniformity and a check of TQ at the end of the shelf life. The oil's stability work is done in the bottle or the softgel; the isolate's is done in the powder blend or the finished tablet. A result from one format does not transfer to the other. The stability page sets out the protocol for the oil. ## The regulatory route is per material The oil and the isolate are different materials for regulatory purposes, and the buyer's team confirms the route for each destination. The oil's file is built on the fatty acid and TQ specification and the contaminant results; the isolate's file needs its own identity, purity and use-level evidence. In the EU, the relevant instruments include the general food law, the food information rules, the contaminant regulation and the novel-food regulation; in the US, the dietary-ingredient basis and the labelling rules apply. This page does not assert that either material is authorised in a named market. Name the material on the label in the form the market file covers. “Black seed oil” and “thymoquinone” are not interchangeable names, and a formula that switches from one to the other needs a new specification, a new label and a new regulatory check. The compliance page lists the documents in the file. ## When to choose which Choose the oil when the ingredient is the oil: a softgel, an oil blend or a label that names Nigella sativa seed oil. It brings the fatty acid matrix, the natural TQ range and a taste and colour that the formulator has to accept. Choose the isolate when the formula needs a defined TQ dose in a small mass and the regulatory route for the isolate is confirmed. It brings a crystalline solid, a different solubility and a content-uniformity task. A standardised oil sits between the two: it is an oil with a declared TQ figure, and the label should say whether the figure is natural or adjusted. Do not describe a standardised oil as cold-pressed and unmodified if TQ was added. The product page carries the oil specification; the grades page places this comparison in the wider range; the COA page shows how the TQ figure is reported; the evening primrose oil powder page shows the carrier route for a powder format. ### 03 Black seed oil keeps in the dark: oxidation sets the shelf life URL: https://nutrition.rainwoodbio.com/products/fatty-acids/black-seed-oil/stability/ Reviewed: 2026-11-19 Black seed oil is a cold-pressed, unrefined oil, and its shelf life is set by oxidation. Light, heat, oxygen and trace metals raise the peroxide value and reduce the thymoquinone (TQ) figure; moisture drives hydrolysis and raises free fatty acid. The pack and the storage condition decide how long the oil keeps, so a shelf-life number without them is not a specification. In one lineBlack seed oil fails by oxidation: light, heat and oxygen raise the peroxide value and take the thymoquinone down with them, and the pack decides how fast. ## The neat oil in the pack Moisture in the oil is specified at ≤0.1%, and it matters even though the oil is not a powder. Water promotes hydrolysis of the triglycerides, which raises free fatty acid; it also feeds the reactions that lead to rancidity. A drum stored in a humid bay with a loose bung can pick up moisture at the surface and in the headspace. Headspace is the other variable. A full, sealed container has little oxygen; a part-used bottle has a large oxygen reservoir and a fresh oil surface every time it is opened. The 1 kg amber bottle is a light barrier and a convenient unit, but it is not a long-term storage vessel once opened. Blanket with nitrogen or transfer the remainder to a smaller, full container when a pack will be held. The drum adds its own questions: the liner, the bung and the date of opening. A 25 kg HDPE drum is a good barrier while it is closed, but every opening exchanges air. Record the opening date, keep the bung tight and use the oil within the in-use period that the quality agreement sets. ## The oil in a matrix: softgel, blend and emulsion In a softgel the oil is enclosed, so light and oxygen are limited by the shell and the fill. The shell can still lose moisture and become brittle, and a seam failure exposes the oil. In an oil blend, the other oils dilute the TQ and change the oxidation rate; a highly unsaturated oil can speed the whole blend, while a more saturated carrier can slow it. An emulsion puts the oil in water, where hydrolysis and oxidation run together and the interface is large. TQ can migrate to the oil–water interface, and a clear bottle is an exposure. If a beverage or a cream is the format, the stability work has to be done in that matrix, not on the neat oil. The softgel fill also has a physical side: the oil can migrate into the shell, and the shell can soften or become tacky. That is a shell-and-fill compatibility question, not a TQ question, and it belongs in the stability trial. ## What pushes the oil toward rancidity Factors that move black seed oil during storage | Factor | What it does | Control | Light | TQ loss and oxidation; colour change | Amber bottle, opaque drum, dark store | Oxygen | PV and p-anisidine value rise; rancid odour | Full pack, low headspace, nitrogen | Heat | Faster oxidation and TQ loss | Cool store; keep pressing and filling cool | Moisture | Hydrolysis; FFA rises | Sealed pack; dry store; Karl Fischer limit | Metals | Trace iron and copper catalyse oxidation | Avoid metal contact; check the drum liner | Time | All of the above accumulate | Retest period from data for the pack These factors act together. A warm, bright store with a part-full bottle is worse than the sum of the individual effects, and a trace of copper from a fitting can start an oxidation chain that no antioxidant repairs. The useful question is not whether the oil is stable in general, but how long it keeps in this pack, at this condition, with this headspace. ## Designing the stability trial A practical protocol uses long-term storage at 25 °C/60% relative humidity, intermediate storage at 30 °C/65% relative humidity and accelerated storage at 40 °C/75% relative humidity, plus a light-exposure arm. The light arm matters because a dark incubator cannot show the failure that a bright shelf produces. Test peroxide value, p-anisidine value, free fatty acid, thymoquinone, fatty acid profile, moisture, appearance and sensory at each point. The fatty acid profile should not move much in a sealed pack; if it does, the oil has oxidised or the sample has been mishandled. TQ is the more sensitive line, and it can fall before PV reaches the limit. Run the trial in the pack that will be sold. A 1 kg bottle and a 25 kg drum have different headspace and different opening histories. A bulk result does not transfer to the bottle, and a bottle result does not transfer to a softgel. ## What the finished formula does to the rate An oil blend calls for a check of the blend's own PV and TQ after mixing, not only the components. A softgel calls for shell integrity and fill appearance. A powder on a carrier calls for the carrier's moisture and the oil load, because a high-load powder can release oil and oxidise at the surface. In every case, the TQ figure is the first thing to watch: it falls before the fatty acid profile moves. An antioxidant can slow the rate, but it does not repair a pack that lets oxygen in, and it does not restore TQ that has already been lost. If an antioxidant is used, it belongs in the specification and in the stability trial, not only in the product description. ## How a retest period is assigned We do not publish one shelf life for black seed oil, because the pack and the storage condition set it. The retest period on the specification is supported by the stability file for that pack, and the file should name the tests, the conditions and the lot family. At the end of the period, re-test the retained sample rather than extending the period by assumption. A low PV at release is not a guarantee. A lot can leave the plant well inside the limit and climb past it in a warm warehouse; the release result and the storage history are both part of the answer. The product page lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the methods index explains the analytical work; the quality page describes the release file. ### 04 Black seed oil: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/fatty-acids/black-seed-oil/moq/ Reviewed: 2026-11-19 The MOQ for black seed oil is 1 kg, supplied in a 1 kg amber bottle; the bulk pack is a 25 kg HDPE drum. Lead time is 1–7 days for the standard pack. A firm quotation needs the botanical name, the grade, the thymoquinone (TQ) and fatty acid specification, the quantity and pack, the destination and Incoterm, the documents and the intended use. In one lineThe minimum is one 1 kg amber bottle: it can be sampled, tested and traced, and it is the smallest pack that carries a lot code. ## Why the minimum is one bottle One kilogram covers a bench trial, a retained sample and an independent test. It is also a parcel that can travel by air without a pallet, which matters when a formulator needs material before the production plan is fixed. The pack is a commercial unit with a lot code, not a scoop from a drum. Below 1 kg the oil is usually split from a larger lot and repacked. That adds handling, loses the original pack identity and makes traceability harder, without changing the oil. The 25 kg drum lowers handling per kilogram, but it commits inventory and a longer storage period. The MOQ is a pack decision, not a volume incentive. ## Packs and formats Standard black seed oil packs | Pack | Net weight | Typical use | Notes | Amber bottle | 1 kg | Trial, sample, small batch | Light barrier; reseal; use within the in-use period | HDPE drum | 25 kg | Production | Tight bung; liner; lot code on drum and label | Powder on carrier | On request | Sticks, capsules | Oil load and carrier are a new specification The bottle is amber to keep light off the oil; the drum is HDPE with an inner liner and a bung that must be closed after every sample. The drum's liner and bung are the moisture and oxygen barrier, and the opening date belongs on the batch record. A powder-on-carrier format is not a packing choice: the carrier, the oil load and the TQ figure are new specification lines. ## Lead time and dispatch The standard pack is quoted at 1–7 days from order confirmation. That window covers picking, document preparation and dispatch; it does not include shipping transit, customs clearance or the customer's own quality release. A custom pack, an extra segregation step or a powder-on-carrier trial adds time, and the quotation should state it separately. Ask for the dispatch date, not only the lead time. A 1 kg bottle may travel as a parcel and a 25 kg drum on a pallet; the Incoterm decides who books the freight and who clears the entry. The documents should travel with the lot, not after it. ## What a quotation needs - Botanical name and grade. Nigella sativa L. seed oil, cold-pressed and unrefined; plant part and grade named. - Specification. Linoleic and oleic ranges, the TQ figure and its method, FFA, PV, moisture and appearance. - Quantity and pack. 1 kg bottle, 25 kg drum, or a powder-on-carrier format. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, specification, SDS, allergen and GMO statements. - Intended use and market. Supplement, food or another use, and the market where it will be sold. A quotation without the grade and the market is incomplete. The same oil can suit one destination and sit outside the file for another, and the paperwork is part of the offer. Commercial terms are stated on the quotation, not on this page. ## A sample carries the lot code The 1 kg bottle is the qualification sample. Test the fatty acid profile, TQ, FFA, PV, moisture and metals before scaling, and keep a retained sample from the same bottle. The lot code on the sample, the COA and the quotation should match. A sample without a lot code is a demonstration, not a qualification. Sediment can settle; mix the sample before taking a portion, and let a cold sample warm and clear before inspection. A hazy sample is not automatically out of specification, but the haze should be explained. If the project needs a smaller quantity for a bench trial, discuss it before ordering; a split from a bulk lot is a repack with its own traceability, not the catalog pack. ## Terms to settle before the first order The quotation sets the commercial terms, the Incoterm, the pack, the lead time and the documents. The quality terms belong beside them: the specification revision, the COA per lot, the retained sample, the retest period and the change-control route. A quality agreement is worth having before the first production order, not after the first dispute. Returns and replacements follow the quotation and the quality agreement. A lot that fails the agreed specification should be handled through the retained sample and a joint re-test, not a photograph of the oil. Ask who pays for the referee test, and which laboratory is acceptable to both sides. The product page carries the catalog specification; the COA page lists the release tests; the compliance page covers the market file; the MOQ glossary entry defines the term; the logistics page covers shipping and documents. ### 05 The regulatory file for black seed oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/black-seed-oil/compliance/ Reviewed: 2026-11-19 Black seed oil is a cold-pressed oil, and its regulatory file is built around the exact material, the destination and the finished-product route. The catalog specification and the batch COA describe the oil; the file adds the route, the contaminant calculation, the label review and the change-control record. The buyer's regulatory team confirms that route for the destination. In one lineThe specification describes the oil; the regulatory file shows the route, the limits and the label for the destination, and the buyer's team confirms that route. ## What the file contains A complete file answers four questions: what the material is and which specification version is being bought; which lot is released and what its certificate reports; which limits and label rules apply to the finished product; and what changes if the source, the process or the pack changes. The COA answers the lot, the technical data sheet answers the specification and the safety data sheet answers handling. None of them answers the route question on its own. The file should also carry the allergen and GMO statements, the origin record, the pesticide and PAH statements for the seed source, and the packaging declaration. A document list with version numbers is more useful than a folder of undated PDFs. ## European Union The EU file starts with the general food law, Regulation (EC) No 178/2002, and the food information rules in Regulation (EU) No 1169/2011. Contaminants are checked against Commission Regulation (EU) 2023/915, and the novel-food question is checked under Regulation (EU) 2015/2283. The cold-pressed seed oil and a purified thymoquinone isolate are different materials for this purpose, and the buyer's team confirms which route each one takes. Check the current consolidated text: the rules can change, and this summary is as of this review. Labelling names the oil and the botanical source in the form the destination requires. A claim is reviewed separately from the composition. The certificate does not approve a claim, and a TQ figure on the certificate is not a health claim. ## United States The US file is built around the exact dietary ingredient and its intended use. The supplier should be able to name the basis it relies on and point to the supporting document; the buyer confirms that the basis covers the finished product. For a supplement, the framework includes the Dietary Supplement Health and Education Act, the labelling rules in 21 CFR 101 and the current good manufacturing practice rules in 21 CFR 111. A new dietary ingredient needs its own notification under 21 CFR 190.6, and an isolate is a different ingredient from the oil. The claim review is separate from the certificate. ## Contaminants and limits The contaminant panel is a finished-product calculation, not only a drum result. The table below gives the catalog limits for the oil as released; the destination text and the daily dose decide the finished-product limit. Catalog contaminant limits and what the file should show | Parameter | Catalog limit | What the file should show | Lead (Pb) | ≤3 mg/kg | Lot result, method and the finished-product calculation | Arsenic (As) | ≤2 mg/kg | Lot result and method | Cadmium (Cd) | ≤1 mg/kg | Lot result and any category exception that applies | Mercury (Hg) | ≤0.1 mg/kg | Lot result and method | PAH and mineral oil | — | Result for the marker set the market names, with the current destination limit For an oil, the PAH question follows the drying step, and mineral-oil hydrocarbons follow the pressing, storage and packaging chain. The destination's current text sets the marker set and the limit; a result from a different marker set is not a substitute. Where a statement is not available for the lot, name the gap before the order. ## Label and claims No disease-related claim is made for this material on this page. The fatty acid percentages and the TQ figure are composition statements; they do not become a health claim because they appear on a certificate. Structure/function wording, if used, is reviewed for the destination and the finished product, and the reviewer signs it off before the label is printed. Comparative or standardised wording needs care. A TQ figure above the natural range can mean the oil was enriched, and the label should not imply that the oil is naturally that high. “Cold-pressed” is a process description, and it should be supported by the press record, not only by the colour of the oil. ## Documents in the file - Certificate of analysis for the lot, with methods and results. - Technical data sheet and the current specification version. - Safety data sheet for handling and transport. - Allergen and GMO statements; origin record. - Pesticide multi-residue, PAH, heavy-metal and microbiology results. - Packaging declaration and the change-control statement. Each document should carry a version or a lot reference. A generic statement that is not tied to the lot is a policy, not evidence. ## Checklist before the first order - Specification version, botanical name and grade are named. - COA, TDS, SDS, allergen, GMO and origin are on file. - Contaminants are converted to the finished-product dose. - The label and the claim are reviewed for the destination. - The source, process and pack are under change control. - The quotation, specification and certificate refer to the same version. The product page carries the catalog specification; the COA page explains the lot certificate; the identity page covers the analytical evidence. The quality page describes the release file, and the EU regulatory note gives the framework reference. ### 06 How we prove a black seed oil lot is Nigella sativa URL: https://nutrition.rainwoodbio.com/products/fatty-acids/black-seed-oil/identity/ Reviewed: 2026-11-19 A black seed oil lot is the declared material when four checks agree: the paperwork names Nigella sativa and the grade, the GC fatty acid profile sits inside the catalog ranges, the thymoquinone (TQ) figure is consistent with the oil and its volatile fingerprint, and the condition figures match the grade. Linoleic acid alone is a weak proof, because several seed oils can land in the same range. The minor components are what make the identification specific. In one lineIdentity is the fatty acid profile, the thymoquinone figure and the minor components agreeing: any one of them can be copied, and only the set is hard to reproduce. ## The identity layers Start with the paper: species, plant part, grade and lot. Black seed oil and black cumin seed oil are trade names for the same material, but “black cumin” is also applied to other species, so the botanical name is the identifier that matters. The fatty acid profile places the oil in a family but does not name the species. The TQ figure and the volatile pattern carry more specific information. The condition figures show whether the lot is fresh and whether the grade claim is plausible. Four identity checks for black seed oil | Check | Question | Evidence | What it establishes | Paperwork | Is the material named? | Species, plant part, grade and lot | Identity on paper | Fatty acids | Is the profile plausible? | GC-FID of fatty-acid methyl esters | The oil family | TQ and volatiles | Is the fingerprint black seed? | HPLC for TQ plus GC-MS for volatiles | Authenticity | Condition | Is it fresh and the claimed grade? | Free fatty acid, peroxide value, p-anisidine value, colour and press record | Handling and grade Each check is easy on its own and harder to satisfy together. A profile can be copied from a specification; a chromatogram with the column, standard and integration cannot. A TQ figure can be quoted; the full volatile pattern is harder to invent. A lot code ties the documents to the physical pack. ## The ratios that carry the identity With linoleic acid at 50.0–60.0% and oleic acid at 20.0–25.0%, the ratio of the two usually lands between 2.0 and 3.0. That is a useful first filter, but it is not unique. Sunflower and soybean oils can be blended toward the window, and a high-oleic sunflower sits below it. The ratio can exclude some materials; it cannot confirm this one. The more specific pattern is the balance between TQ and the rest of the volatile fraction. Black seed oil carries TQ alongside p-cymene, α-thujene, thymol and carvacrol. An oil that has been dosed with the isolate can hit the TQ range while the rest of the volatile pattern stays thin. The TQ figure is a concentration; the fingerprint is the identity. The oil-to-TQ ratio also matters at the label, because it decides how much oil carries a given TQ mass. One gram at 1.0% carries 10 mg; the same gram at 2.0% carries 20 mg. That is arithmetic for the specification, not an identity test, and the two should not be confused. ## Why X-ray diffraction does not identify an oil X-ray diffraction needs a crystal lattice. A liquid oil has none, so the measurement returns a broad halo rather than a pattern that can identify the oil or measure its fatty acids. XRD is not a release test for black seed oil. It is useful one step away from the oil. A purified thymoquinone isolate is a crystalline solid, and its diffraction pattern, melting range and NMR spectrum are identity evidence for that material. If a supplier offers TQ as a powder, XRD and a melting point belong in the isolate file, not in the oil file. For the oil, GC and HPLC remain the tools. ## What adulteration looks like Common black seed oil substitutions and the signals | Route | What changes | Test | Sunflower, soybean or rapeseed oil | Fatty acid balance shifts; sterols and tocopherols move | GC profile plus sterol and tocopherol patterns | Added thymoquinone | TQ rises; the volatile fingerprint stays thin | HPLC for TQ plus GC-MS volatiles | Volatile oil diluted into fixed oil | TQ and p-cymene high; the fatty acid profile may not match | GC-MS volatiles plus GC fatty acids | Refined oil sold as cold-pressed | TQ and colour down; FFA and PV lower | TQ, colour, sterols and press record | Wrong species (Cuminum cyminum, Bunium persicum) | Different volatile and sterol pattern | Botanical record, GC-MS and sterols Colour is the easiest thing to fake and the weakest evidence. A dark amber tone can come from the seed, the press or an added colour. The sterol, tocopherol and volatile patterns are harder to reproduce. Oxidation is the opposite case: the identity tests can pass while the oil is stale, so condition has to be read at the same time. ## Writing identity into the specification Put the identity clauses next to the composition, not in a separate document. Name the species and plant part, the cold-pressed grade and the lot. Add the fatty acid ranges with the GC method and the basis, the TQ range with the HPLC method and standard, and the volatile fingerprint where authenticity matters. Keep FFA, PV, p-AV, moisture and appearance as condition lines, and require the lot code and retained sample. Two problems recur. One is a profile window so narrow that a normal crop fails. The other is a linoleic result with no stated basis, so the reader cannot tell whether it refers to total fatty acids or to oil mass. The catalog ranges are wide enough for crop variation; the COA page sets out the reporting format. ## Questions that produce evidence - Can you provide the GC chromatogram for this lot, with the column, standard and integration? - What are the linoleic, oleic and palmitic results, and on what basis are they expressed? - What is the TQ result, the HPLC method and the standard, and can you show the chromatogram? - Can you show the volatile fingerprint and the sterol pattern for the same lot? - What were FFA, PV and p-AV at release, and what storage history does the lot have? - What record supports the cold-pressed claim, and will you agree to a joint re-test of the retained sample? A supplier who answers these with documents is giving an identity file. One who answers with a certificate and a percentage is giving a summary. The catalog specification is on the black seed oil product page; the grade choice is on the grades page; the oil-versus-isolate comparison is on the level-four page. The methods index explains the tests, and the quality page covers lot release. ### 01 What the COA for borage oil actually contains URL: https://nutrition.rainwoodbio.com/products/fatty-acids/borage-oil/coa/ Reviewed: 2026-11-19 The certificate for a borage oil lot reports appearance, identification by gas chromatography of the fatty acid methyl esters, the GLA, linoleic and oleic figures, free fatty acid, peroxide value, moisture, the heavy-metal and microbiology panels and a pyrrolizidine-alkaloid result. Every row needs the method, the acceptance limit and the measured value in separate columns. The catalog limits are release targets; the lot certificate records the actual material in the pack. In one lineA borage oil certificate has to show the fatty-acid profile, the oxidation state and the alkaloid result for the same lot, because the GLA figure alone does not describe the oil. ## The certificate as a lot report The catalog GLA range is wide enough that two conforming lots can sit six percentage points apart. The certificate has to show where in the range the lot falls, which acids accompany the GLA and what the oxidation values were at release, not only that the lot is borage oil. A row that says only “conforms” asks the buyer to trust a conclusion without the evidence. The identity row and the GLA row are separate decisions. Identity asks whether the fatty-acid profile is consistent with Borago officinalis seed oil; the GLA figure asks how much of one acid is present. Identity and fatty-acid profile · borage oil | Parameter | Method | Release limit | Appearance | Visual | Clear to slightly hazy, pale yellow to golden | Identification | GC of fatty acid methyl esters against a reference profile | Profile conforms | Gamma-linolenic acid (C18:3 n-6) | GC-FAME | 18.0–25.0% | Linoleic acid (C18:2 n-6) | GC-FAME | 30.0–40.0% | Oleic acid (C18:1 n-9) | GC-FAME | 15.0–25.0% The profile is the part a buyer can use. A certificate that reports GLA but omits linoleic and oleic leaves the identity question open, because a blend can be built to hit a GLA figure while the rest of the profile drifts. ## The GC basis: area per cent, weight per cent and the oil basis Fatty-acid results come from transesterification to methyl esters and capillary GC with flame-ionisation detection. Percentages can be reported as area per cent or as weight per cent after response-factor correction, and the two are not identical. The certificate should state the basis, the column and the standard, and include the chromatogram when identity or the GLA figure is contested. Resolution matters at the C18:3 position. Gamma-linolenic acid (C18:3 n-6) and alpha-linolenic acid (C18:3 n-3) have the same carbon count and can co-elute on a short or non-polar column. A method that does not separate them can report a combined C18:3 figure and overstate the GLA. The method note should show the two are resolved, with the integrated peak on the chromatogram. The oil basis is a second conversion. A figure of 20.0% GLA on the oil means 200 mg of GLA in a gram of oil, before any carrier. If the oil is carried on a powder, the figure on the powder is the oil figure multiplied by the oil load, and the certificate has to say which basis it is reporting. The label arithmetic on the grades page uses the same conversion. ## Release limit, result and the oxidation pair Free fatty acid and peroxide value are release limits and the two numbers most likely to move after release. Peroxide value measures primary oxidation products and rises early; the p-anisidine value measures the secondary aldehydes that appear as the oil ages. A lot can pass the peroxide limit and still develop an off-odour in a softgel within months, which is why the anisidine value is worth agreeing even though the catalog does not fix it. Oxidation, contaminants and release tests · borage oil | Parameter | Method | Release limit | Free fatty acid (as oleic) | Titration | ≤0.50% | Moisture | Karl Fischer | ≤0.1% | Peroxide value | Iodometric titration | ≤5.0 meq O₂/kg | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Pyrrolizidine alkaloids | LC-MS/MS, sum of the regulated list | Reported against the destination limit | p-Anisidine value | Spectrophotometric | Agreed at order The result column needs a measured figure for every line: a number per element for heavy metals, not a single total; the count and the absence statement for microbiology; the sum, individual analytes and limit of quantification for pyrrolizidine alkaloids. A “not detected” entry without a limit describes the method, not the oil. ## What moves between lots The seed lot, the growing season and the pressing temperature move the GLA within the catalog range. Refining moves the free fatty acid, the colour and the alkaloid load much more than the fatty-acid profile. A cold-pressed oil can sit at 0.3% free fatty acid and a refined oil from the same seed at 0.05%, both reporting the same GLA; the grade explains the difference. Peroxide value is the most variable line because it depends on the seed condition, the pressing temperature, the headspace and the time since production. A result close to the 5.0 limit leaves little room for a warm warehouse. Colour is the least quantitative line: pale yellow to golden covers a fresh cold-pressed oil and a lightly refined one, and a darker shade prompts a storage question rather than an identity failure. A single result near an edge is less informative than a trend: GLA drifting low, peroxide climbing, or free fatty acid rising in a refined grade. The lot code on the certificate should match the bottle, the drum and the retained sample, or the trend belongs to a different material. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a disputed GLA figure, a suspected blend or an unanswered PA question. The panel is narrow: GC-FAME with the chromatogram and full profile; peroxide and p-anisidine values; free fatty acid; a sterol profile if the source is disputed; a PA screen by LC-MS/MS; heavy metals and microbiology. Ask for the limit of quantification for each screen, and choose a laboratory working to ISO/IEC 17025 for the tests in scope. Chain of custody matters: the sample tested should be the sample retained, the report should identify the lot, and the referee should receive the certificate and specification with the sample. ## What to compare between suppliers Put six lines side by side: species and process; GLA with its basis; the full fatty-acid profile; free fatty acid, peroxide and p-anisidine values; the PA statement; and pack size with lot traceability. Two certificates that agree on GLA but disagree on linoleic or oleic are not the same oil, and one without a PA statement leaves the borage-specific question unanswered. The catalog limits are on the borage oil product page. Test terms are defined in the COA glossary entry, the method library is indexed under analytical methods, the borage-versus-evening-primrose comparison is on the evening primrose oil powder page, and lot release is described on the quality page. ### 02 Borage oil grades: cold-pressed, refined and high-GLA URL: https://nutrition.rainwoodbio.com/products/fatty-acids/borage-oil/grades/ Reviewed: 2026-11-19 Borage oil is traded in three practical grades — cold-pressed, refined and a high-GLA refined cut — with organic versions of the first two. The grade decides the colour, the free fatty acid and peroxide values, the pyrrolizidine-alkaloid load and the documentation that comes with the lot, while the GLA range is agreed separately. The choice follows the label, the capsule format and the market file rather than a ranking of quality. In one lineGrade is a process decision before it is a GLA decision: cold-pressed, refined and high-GLA borage oils differ in colour, oxidation values, alkaloid load and paperwork. ## Why the grade comes before the GLA figure Two borage oils can report the same GLA and behave differently in a capsule. A cold-pressed oil carries the seed's minor components, a stronger colour and aroma, and a free fatty acid figure that reflects the pressing rather than a failure. A refined oil has been through alkali refining, bleaching and deodorisation: it is paler, milder and lower in free fatty acid, and the same steps reduce the pyrrolizidine-alkaloid load that borage seed can carry. That is the trade. Refining buys colour, taste, oxidation headroom and a lower alkaloid figure, and it removes some of the tocopherols and sterols that a cold-pressed buyer may be paying for. Neither route changes the fatty-acid backbone much, which is why the GLA range has to be specified on top of the grade rather than instead of it. For a supplement label, the grade is also a documentary choice: cold-pressed needs a pressing record and a PA statement; refined needs the refining record, the deodorisation conditions and the process-contaminant statement. ## The grades side by side Practical borage oil grades and what changes between them | Grade | Process | GLA | Character and typical use | Cold-pressed, standard | Seed pressed and filtered; no solvent | 18–23% | Fuller colour and aroma; capsules and clean-label oils | Refined, standard | Alkali refining, bleaching, deodorisation | 18–25% | Pale and mild; capsules and oil blends | High-GLA refined | Selected seed refined to the upper range | 23–25% | Less oil weight per label figure | Organic cold-pressed | Certified organic seed, pressed | 18–22% | Organic-labelled capsules and oils | Powder on carrier | Oil microencapsulated on a carrier | 18–25% on the oil | Sticks and powder blends; oil load declared The ranges are market ranges, not a second specification. The catalog range that governs an order is 18.0–25.0% GLA by GC; a grade narrows it. The powder line is a format, not a grade: the oil load and the powder's GLA figure must be stated separately, because 20% GLA on a 40% oil powder is 8% on the powder. ## Colour, clarity, odour and the cold test The catalog appearance is a clear to slightly hazy oil, pale yellow to golden. Cold-pressed borage is usually the darker and hazier of the two main grades, and a sediment or a cloud at low temperature is normal for an unrefined oil. Refined oil is lighter and should stay clear at room temperature; a haze that persists after warming is a prompt to ask about moisture, waxes or the refining step. Borage oil has a faint, mild, slightly grassy odour when fresh. A rancid, painty or cardboard note is an oxidation signal, not a grade characteristic, and it can appear while the GLA figure is still inside the range. The odour check is a screening test; the peroxide and p-anisidine values are the evidence. Viscosity, density and refractive index sit in the usual triglyceride window. They are useful for a quick check but weak for identity; the fatty-acid profile carries the identity question. The identity page sets out the full test set. ## What the GLA figure means in a capsule One gram of borage oil at 18–25% GLA carries 180–250 mg of GLA. A 500 mg softgel carries 90–125 mg, and a 1,000 mg softgel carries 180–250 mg. Read the other way, a label figure of 100 mg GLA needs 0.40–0.56 g of oil at the catalog range, before any overage or fill loss. Those figures are arithmetic, not a dose recommendation. The label figure, serving size and capsules per serving are the formulator's decisions; the certificate supplies the concentration. A label that states oil weight and one that states GLA are different claims, and both must agree with the lot's COA. For a powder on carrier, the same arithmetic runs through the oil load. At 40% oil load and 20% GLA on the oil, one gram of powder carries 80 mg GLA; at 25% GLA on the oil it carries 100 mg. A powder specification that gives only one of the two leaves the conversion unstated. The comparison with evening primrose oil, which is less concentrated, is worked through on the borage versus evening primrose page. ## Writing the grade into the specification A borage specification should open with the species and the plant part: “borage (Borago officinalis) seed oil”. It should then fix the process — cold-pressed, refined or organic — the GLA range and its basis, and the full fatty-acid profile with linoleic, oleic and the minor acids. Moisture, free fatty acid, peroxide value and the PA limit come next, followed by the antioxidant, if one is added, and the pack. If the customer buys against a monograph, add the monograph lines. The British Pharmacopoeia monograph for refined borage oil caps erucic acid at 3.0% and nervonic acid at 4.5%; a buyer who needs it should write it into the specification rather than assume it. The catalog range on this site does not carry those caps, so a monograph order is a separate specification, not a variant of the catalog one. The grade name on the certificate, the purchase order and the label review should be the same words. “Cold-pressed” is a process statement; “refined” is a process statement; neither is a synonym for a GLA figure. A lot that meets the GLA range but not the process statement is the wrong grade. ## When borage is the wrong grade or the wrong oil Borage is the wrong oil when the label names evening primrose, blackcurrant or another source. The ingredient name, the species and the INCI name are part of the product, and a GLA match does not license a substitution. It is also wrong when the formula is built around evening primrose's higher linoleic fraction, or when the customer's specification is written around an existing EPO stability file. Within borage, a cold-pressed grade is the wrong grade when the PA limit or the colour window cannot be met, and a refined grade is the wrong grade when the project needs the minor components of the unrefined oil. A high-GLA cut is wrong when the extra concentration is unused and the specification is fixed at 20%. Grade changes are change-control events, not stock swaps. The catalog limits sit on the borage oil product page. The alternative source is covered on the evening primrose oil powder page, release tests are listed on the COA page, the test methods are indexed under analytical methods, and the release process is described on the quality page. ### 02.1 Borage oil vs evening primrose oil: GLA, dose and the label URL: https://nutrition.rainwoodbio.com/products/fatty-acids/borage-oil/grades/borage-oil-vs-evening-primrose-oil/ Reviewed: 2026-11-19 Borage oil and evening primrose oil are both GLA sources, but they are not interchangeable at the same weight. Borage carries 18–25% GLA and evening primrose 8–11%, so a fixed label figure needs roughly half the oil weight from borage; the rest of the profile, the alkaloid file and the ingredient name also change. In one lineAt 18 to 25% GLA, borage oil reaches a label figure with about half the oil weight that evening primrose oil needs at 8 to 11%, and the swap changes the profile, the alkaloid file and the ingredient name. ## Two oils, two fatty-acid profiles Borage (Borago officinalis) seed oil is the more concentrated GLA source and the less linoleic one. Evening primrose (Oenothera biennis) seed oil is the reverse: a large linoleic fraction and a modest GLA fraction. That is a different composition, not a quality ranking, and it changes the oil weight, the mouthfeel, the oxidation behaviour and the label. Typical fatty-acid profiles · borage oil against evening primrose oil | Marker | Borage oil | Evening primrose oil | GLA (C18:3 n-6) | 18–25% | 8–11% | Linoleic (C18:2 n-6) | 30–40% | 70–75% | Oleic (C18:1 n-9) | 15–25% | 8–12% | Erucic (C22:1) | About 1–3% | Trace | Nervonic (C24:1) | About 1–2% | Trace | GLA : linoleic | About 0.45–0.83 | About 0.11–0.16 Borage also carries small amounts of erucic and nervonic acid, which evening primrose does not. The minor acids are identity markers and a reminder that the two oils are different materials. The ranges are typical; the certificate carries the measured profile for the lot. ## The potency difference in grams One gram of borage oil at 18–25% GLA carries 180–250 mg GLA; one gram of evening primrose at 8–11% carries 80–110 mg. The midpoints are about 215 mg against 95 mg, a little over twice as concentrated, and the ratio moves with the lot because both ranges are wide. Read the other way, 100 mg GLA needs 0.40–0.56 g of borage oil or 0.91–1.25 g of evening primrose oil. That is a label calculation, not a dose recommendation, and it explains why a 500 mg borage capsule and a 1,000 mg evening primrose capsule can carry a similar GLA figure. ## Capsules, softgels and powders A 500 mg softgel of borage oil at 20% GLA carries about 100 mg GLA; the same fill of evening primrose at 10% carries about 50 mg. A 1,000 mg softgel doubles those figures. The formulator can reach a target with fewer or smaller borage capsules, which matters when the serving size is fixed. For a powder, the oil load sits between the oil and the label. At 40% oil load, borage at 20% GLA on the oil carries about 8% on the powder, and evening primrose at 10% carries about 4%; a 100 mg GLA serving takes about 1.25 g of the borage powder or 2.5 g of the evening primrose powder. If a supplier quotes only the oil load, or only the GLA on the powder, half the calculation is missing. ## Oxidation and the alkaloid file Both oils are rich in polyunsaturated fatty acids and both oxidise; the GLA in each carries three double bonds. Borage is not automatically the more stable oil because it is more concentrated, and evening primrose is not automatically the more stable one because it is more dilute. Peroxide value, p-anisidine value, the antioxidant, the headspace and the pack decide the shelf life. Borage adds a risk that evening primrose does not: pyrrolizidine alkaloids. Borage is a PA-relevant botanical, and the seed oil can carry a load that the destination limits. The file needs a PA result by LC-MS/MS, calculated at the finished-product dose, plus the refining record where the oil is refined. A lot can pass its GLA and oxidation limits and still fail the alkaloid question. ## The label has to name the oil “Borage oil” and “Borago officinalis seed oil” are the names for one ingredient; “evening primrose oil” and “Oenothera biennis oil” are the names for another. A product named for one source cannot be made with the other, even when the GLA figure matches. If the pack contains both oils, the ingredient list has to show both, ordered by weight. The GLA figure needs a basis: oil weight or GLA figure, one follows from the other, and both should agree with the COA. Reformulating from one to the other means a fresh label, a fresh ingredient declaration and a fresh stability file. The front-of-pack name follows the source, not the GLA figure. ## The market route is similar, the file is not Both oils have a history of food use in the EU before 15 May 1997 and are sold as dietary ingredients in the United States; the buyer's regulatory team should still check the current novel-food catalogue, the dietary-ingredient basis and the destination rules for the specific oil and process. Neither carries an authorised EU or UK health claim for GLA as of this review, and a US structure or function statement needs the DSHEA disclaimer. The files diverge on the borage-specific items: the PA statement, the erucic and nervonic figures where required, and the refining record. The evening primrose file does not carry the same PA question. The contaminant and label rules apply to both, but the borage evidence is not a copy of the evening primrose evidence. ## When to choose which Borage is the practical choice when the label figure has to be met with less oil, when the borage name is acceptable, and when the customer signs off the different profile and the PA evidence. Evening primrose is the practical choice when the label itself names it, when an existing EPO specification and stability file are already in place, and when the formulation uses its higher linoleic fraction. Neither oil is a drop-in for the other. A source switch changes the ingredient name, the oil weight per GLA figure, the profile, the alkaloid file and the label, so it runs through change control: new specification, new certificate and, where needed, a new stability review. The catalog limits are on the borage oil product page. The evening primrose specification is on the evening primrose oil powder page, grade and GLA options are on the borage grades page, alkaloid and label rules are on the compliance page, test methods are indexed under methods, and release is described on the quality page. ### 03 Borage oil stability: oxidation, pack and shelf life URL: https://nutrition.rainwoodbio.com/products/fatty-acids/borage-oil/stability/ Reviewed: 2026-11-19 Borage oil is an oxidation-prone seed oil. Its GLA carries three double bonds and its linoleic acid two, so oxygen, light and warmth attack the oil before the fatty-acid assay shows anything unusual. Peroxide value rises first, p-anisidine value follows as secondary aldehydes form, and free fatty acid climbs when moisture reaches the oil. How long it holds depends on the container, the headspace and the storage temperature. In one lineBorage oil fails by oxidation before it fails by assay, so peroxide value, p-anisidine value and free fatty acid are the early signals the pack has to control. ## The neat oil in its sealed pack The release limit for moisture is ≤0.1%. That is a gate at filling, not a buffer against a humid store: residual water and water vapour both drive hydrolysis, and free fatty acid is the value that climbs. A drum left open in a damp room is no longer in the condition it was tested under. Keep the 1 kg amber bottle and the 25 kg HDPE drum sealed, lined and dry. Oxygen matters more than moisture here. Oxidation starts at the oil surface and continues in whatever air sits above it, so a full drum ages more slowly than one that has been drawn down. Nitrogen can displace that air at filling, but the flush has to be specified and checked; without a measurement it is an assumption. Once a pack is open, transfer the remainder to a smaller container that leaves little headspace. Light is the third variable. Oil in a clear bottle on a lit shelf oxidises through the glass, so amber glass or an opaque secondary pack is part of the specification. Warmth accelerates the same reactions; a store near a heater is a different condition from a temperature-controlled room. ## Blends, emulsions and softgel fills Borage oil is not water-soluble and not supplied as an aqueous solution. The systems that matter are oil blends, oil-in-water emulsions and softgel fills, and each changes the oxidation rate. In a blend, the most unsaturated oil usually governs the induction period, and a small share can pull the whole blend down. In an emulsion the oil is dispersed into small droplets, so the interfacial area is large and oxygen, light and trace metals meet the oil at the interface. Emulsifier choice, pH, homogenisation energy and antioxidant strategy outweigh the bulk oil's own result. An emulsion stable on the bench can still develop a painty note in a pack; run the shelf-life study in the emulsion, not only on the bulk oil. A softgel shell limits oxygen transfer but does not stop it, and it can carry moisture into the fill. The fill's peroxide and p-anisidine values at release and after storage are the evidence; the shell colour and the fill odour are the early warning. A powder's matrix, oil load and seal decide the rate. ## What moves the oil in storage What changes borage oil during storage | Factor | Effect | Control | Oxygen | Raises peroxide value, then p-anisidine value | Nitrogen flush; low headspace; sealed pack | Light | Accelerates oxidation at the surface | Amber glass or opaque secondary pack | Heat | Raises the rate of oxidation and hydrolysis | Cool store; short holds; no hot loading bay | Moisture | Drives hydrolysis and raises free fatty acid | Dry store; closed liner; ≤0.1% at release | Metal ions | Catalyse oxidation at trace levels | Stainless steel or glass contact; avoid iron and copper | Repeated opening | Replaces the headspace with air | Smaller packs; decant into a full container The factors reinforce one another: a warm, lit store holding a part-used drum is the hardest case. The question is not whether the oil is stable in the abstract, but for how long, in which pack and under which conditions. ## A stability protocol for borage oil A usable protocol fixes four things: the container, the climate, the sampling times and the tests. A common design uses 25 °C/60% RH long term, 30 °C/65% RH intermediate and 40 °C/75% RH accelerated. Include a light-exposure arm: an incubator kept dark cannot reveal a photochemical failure. If the oil is sold in a softgel, blend or emulsion, study that matrix as well. Test peroxide value, p-anisidine value, free fatty acid, moisture and appearance at every point, and run the full fatty-acid profile at the first and last time points to check the GLA figure and identity. Tocopherols are worth measuring if the oil is sold on its minor components or an antioxidant has been added. The report should give individual results, not a pass statement, tied to the pack, lot family and storage condition. Sampling has to be representative: a top-of-drum sample is not the same as one drawn after mixing, and a sample left open on the bench has already begun to oxidise. The protocol should say how the sample was taken, stored before the test and how long it waited. ## What the finished formula does A softgel fill is the most common format for borage oil, and the shell is a barrier rather than a seal. Gelatin and plant shells transmit some oxygen and moisture, and the seam is the weak point. Measure the fill at release and at the end of the study, and inspect the shell for discolouration, sticking and leakage. Blended with a more saturated oil, the blend may oxidise more slowly than borage alone but not as slowly as the saturated oil, and the label must declare the blend in descending order. An emulsion adds the interface and the aqueous phase, and a powder adds the carrier and the drying step. Any antioxidant is part of the specification: mixed tocopherols, rosemary extract or another system should be named with its level, and the label must reflect it. An antioxidant slows oxidation; it does not reverse it. Adding tocopherol to an oil that has already reached a high peroxide value does not restore the specification, and it can change the colour and the analytical result. Decide the antioxidant system before the stability study, not after a failing result. ## Setting the retest period No single shelf life applies to borage oil, because the pack, the headspace and the storage condition decide it. A retest period has to rest on data from the same pack; a number published without the pack and condition is only an assertion. Refined oil usually starts with a lower peroxide value and may hold its specification longer in the same pack, but that is a data question, not a rule. Before any extension, the retained sample is re-tested at the end of the retest period. A bulk result does not transfer automatically to a repacked bottle or to a softgel, and one customer's storage condition does not transfer. The delivery documents should state the lot, the production date and the retest date, and the buyer should confirm the remaining shelf life at delivery. The catalog specification is on the borage oil product page. The release tests are described on the COA page, the pack sizes and lead time are on the MOQ page, the analytical methods are indexed under methods, and the release and retained-sample workflow is on the quality page. ### 04 Borage oil: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/fatty-acids/borage-oil/moq/ Reviewed: 2026-11-19 The minimum order for borage oil is 1 kg, supplied in an amber bottle. Production quantities are packed in the 25 kg HDPE drum, and a released lot that meets the catalog specification usually ships within 1–7 days. A quotation is built from the grade, the GLA range and the tests the destination requires, not from the pack size alone. In one lineThe 1 kg amber bottle is the smallest unit we can draw from a released lot and keep traceable to a retained sample; the 25 kg drum is the same oil in a production pack. ## Why the minimum is one kilogram Borage oil is a specialty seed oil, not a commodity sold by the tanker. The 1 kg pack is large enough to run a bench trial, a softgel fill check and an independent GC or oxidation test, and small enough that a buyer can evaluate a lot without committing to a production quantity. It is also the smallest unit we can draw from a released lot and keep traceable to a retained sample. The minimum is a traceability unit, not a marketing threshold. Every pack carries a lot code that links back to the pressing or refining batch, the certificate and the retained sample. A buyer who needs a different pack size should raise it before the order is placed, because the pack is part of the specification and part of the stability file. Specialty oils also move in small volumes. A 1 kg order can be shipped by courier, while a 25 kg drum goes as a standard palletised consignment. Neither is a dangerous good under normal transport classification, but the pack has to be closed, labelled and protected from light and heat in transit. ## The two standard packs Borage oil packs and their typical use | Pack | Format | Typical use | 1 kg | Amber bottle with a closed liner | Sample, bench trial, small batch | 25 kg | HDPE drum with a food-grade liner | Production run, blending, softgel fill The amber bottle is part of the light protection, not a decoration. A clear bottle in a lit warehouse exposes the oil through the wall, and the label does not stop the oxidation. The HDPE drum is a moisture barrier and a light barrier, and its liner is the primary seal; a damaged liner or a drum that has been opened and left with a large headspace is a different storage condition. Nitrogen flushing, if required, should be written into the order and stated on the packing record. The same applies to any antioxidant: it is part of the specification, not an extra, and the label declaration follows from it. A drum that is filled to the shoulder has less headspace than a part-used drum, which is why the pack size should match the rate at which the customer uses the oil. ## Lead time and what changes it A catalog grade held in stock normally ships within 1–7 days. The clock starts when the order, the specification version and the shipping details are confirmed, not when the enquiry arrives. A released lot ships with its certificate and its pack record; a lot that has to be re-tested for a destination-specific panel adds time before dispatch. A new GLA range, a different refining route, a monograph specification or a PA limit below the standard release panel can add time, because the material may have to be selected or tested against the new requirement. The exact date is confirmed with the order; a promise made before the specification is fixed is not a lead time. Seasonal seed availability can also move the date for a grade that is not held in stock. ## The six details a quotation needs - The species and grade: borage seed oil, cold-pressed, refined, organic or a high-GLA cut. - The GLA range and its basis: percentage by GC, on the oil, with the method and the chromatogram requirement. - The full profile, free fatty acid, peroxide value and any p-anisidine limit beyond the catalog. - The pyrrolizidine-alkaloid limit, the method and whether a per-lot statement is required. - The pack size, the number of packs and the labelling and pallet requirements. - The destination, the delivery term and the documents the market file needs. A quotation that lists only “borage oil 20%” is not a quotation for a specified material. The six details turn it into one, and they also make the certificate and the purchase order agree. If a detail is not fixed, it should be marked as open and settled before the order rather than assumed from a previous purchase. ## Samples and the pre-order check A sample is drawn from the released lot and shipped with the same lot code as the production pack. A 100 g draw is enough for a GC fatty-acid profile, free fatty acid, peroxide value and a PA screen; a larger draw is useful if the customer wants to run a softgel fill trial or an accelerated storage check. The sample should be kept closed, cool and dark, and tested soon after arrival, because an oil sample on a bench is already ageing. The sample is not a separate production run. It is a draw from the lot that will ship, and the certificate for that lot should accompany it. If the sample passes and the production lot is drawn from a different batch, the buyer is relying on a different material; the lot code on the certificate is the link that has to match. For a first order, it is worth testing the sample for the two things that are easiest to assume: the full fatty-acid profile, not only the GLA, and the peroxide and p-anisidine values. The identity page explains what the profile proves, and the COA page explains how the results should be reported. ## Terms to settle before the purchase order The specification version belongs on the purchase order, together with the grade, the GLA range, the PA limit and the pack. The certificate is supplied per lot; a certificate from a previous lot is not evidence for the lot that ships. The retest date and the remaining shelf life at delivery should be stated, and any deviation from the specification should be agreed in writing before dispatch. Change control is the term that protects both sides. A change of seed source, pressing temperature, refiner, antioxidant or pack is a specification change, and it should trigger a new certificate and, where the market file depends on it, a new stability review. Delivery terms, documents and the sample retention period belong in the same agreement. The catalog data is on the borage oil product page. The alternative source is covered on the evening primrose oil powder page, the test methods are indexed under analytical methods, release is described on the quality page, and the pack and storage limits are on the stability page. ### 05 The regulatory file for borage oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/borage-oil/compliance/ Reviewed: 2026-11-19 A borage oil regulatory file ties the specification to the destination where the finished product is sold. It carries the species and grade, the GLA figure and its basis, the contaminant results, the pyrrolizidine-alkaloid statement, the allergen and origin records and the label review. The borage-specific item is the alkaloid file; the refined-oil items are the process contaminants. The buyer's regulatory team confirms the route, because the finished product, the dose and the local rules decide it. In one lineA borage oil file has to prove the species, the alkaloid load and the label name as well as the GLA figure, and the buyer's regulatory team confirms the route for the destination. ## What the file has to answer Start with identity and grade: which species, which process and which version of the specification? Then tie the paperwork to one batch: which lot does the certificate cover, and what were its results? Next, test the destination: does the intended use and daily intake fit the local route and limits? Finally, plan for change: a new seed source, refiner or pack can reopen the file. Each document answers only part of that. A certificate speaks for one lot; a data sheet describes the material in general; neither decides the market route. The label review, the intake calculation and the novel-food or dietary-ingredient check are separate tasks, and the file should carry them with dates and version numbers. ## European Union Three EU instruments anchor the review: Regulation (EC) No 178/2002 for general food law, Regulation (EU) No 1169/2011 for consumer information, and Regulation (EU) 2023/915 for contaminant limits in force at the time of writing. Borage seed oil has a history of food use in the Union before 15 May 1997, which is the starting point for the novel-food question under Regulation (EU) 2015/2283; the buyer should still check the current catalogue and the process behind the oil, because a new extraction step can change the answer. Borage is a pyrrolizidine-alkaloid-relevant botanical, and that is the line a generic seed-oil file often misses. The EU contaminant regulation sets a maximum for the sum of a defined list of alkaloids in food supplements, 400 µg/kg at this review, and the limit is assessed on the finished product. The oil result has to be converted to the dose: a lot at the limit can pass at a low inclusion and fail at a high one. Ask for the sum, the individual analytes and the limit of quantification, by LC-MS/MS. Refined borage oil also brings the process contaminants into scope. 3-MCPD and its fatty acid esters, and glycidyl fatty acid esters, form during deodorisation, and the refinery should state the deodorisation route and provide results when the destination sets a level. A cold-pressed oil has a different process profile but still needs the pesticide, PAH and alkaloid statements that the market requires. In Great Britain the retained framework applies; Northern Ireland follows the EU rules, so the two do not share one file. ## United States In the United States, borage oil is sold as a dietary ingredient, and the file turns on the basis the supplier relies on. The supplier should state that basis and supply the document behind it — a history of use before 15 October 1994 or a notification — and the buyer checks that it reaches the finished product. Reviewers normally work from three sources: the Federal Food, Drug, and Cosmetic Act; the labelling rules in 21 CFR 101; and, for supplements, the cGMPs in 21 CFR 111. The Supplement Facts panel declares the dietary ingredient by name. “Borage oil” or “Borago officinalis seed oil” is the ingredient; a blend is declared as a blend, with components listed in descending order by weight. A structure or function statement needs the DSHEA disclaimer and must not be a disease claim. The US file does not replace the EU or UK file, and a claim acceptable in one market is not automatically acceptable in another. ## Limits and the dose calculation Limits to carry into the finished-product review · borage oil | Parameter | Release target | What the file must show | Lead (Pb) | ≤3 mg/kg | Measured value, method and intake arithmetic | Arsenic (As) | ≤2 mg/kg | Lot value against the agreed target | Cadmium (Cd) | ≤1 mg/kg | Measured value; category exceptions noted | Mercury (Hg) | ≤0.1 mg/kg | Measured value with the method | Pyrrolizidine alkaloids | Destination limit | Sum, analyte list and LOQ by LC-MS/MS | 3-MCPD and glycidyl esters | Destination limit | Refining record plus results where a limit applies | Free fatty acid and peroxide value | ≤0.50% and ≤5.0 meq O₂/kg | Lot values and storage record | Pesticides and PAH | Destination list | Current-list statement and results The catalog limits are the release gates for the oil, not the compliance answer. Each result has to be converted to the daily intake of the finished product and compared with the destination rule. A heavy-metal panel catches neither the alkaloid nor the process-contaminant question, and a PA statement does not cover heavy metals. The file needs both, and the calculation needs the inclusion rate, not only the oil result. ## Label and claims The label has to name the oil. “Borage oil” and “Borago officinalis seed oil” are the food and INCI names, and evening primrose oil is a different ingredient, not a synonym. If the product is a blend, the ingredients are declared in descending order by weight, and the GLA figure needs a basis: per serving, from the oil, with the oil weight stated. A GLA figure is a composition statement; it is not a health claim. As of this review, there is no authorised EU or UK health claim for borage oil or for GLA, and a claim cannot be built by rephrasing a fatty-acid figure. In the US, a structure or function claim is the brand's responsibility, requires the DSHEA disclaimer and must not be a disease claim. No disease-related claim is made on this page, and the regulatory file does not validate a claim. ## Documents in the file - Version-controlled specification with species, grade, GLA range and profile. - Lot certificate of analysis with methods, results and the PA statement. - Technical data sheet and safety data sheet. - Allergen, GMO and country-of-origin statements. - Pressing or refining record, including the deodorisation step for a refined grade. - Heavy-metal, pesticide, PAH and process-contaminant statements as required. - Packaging declaration, lot-code traceability and retained-sample record. ## Checklist before the first order - The species, grade, specification version and GLA basis are fixed in writing. - COA, TDS, SDS, allergen, GMO and origin records are present and dated. - The PA result is reported against the destination limit and calculated at the dose. - The label and claim review is complete for the destination market. - Each contaminant result has been recalculated at the finished-product inclusion rate. - Quotation, specification and certificate all cite the same version. The catalog limits are on the borage oil product page. Market frameworks are summarised in the EU regulatory note, release tests are listed on the COA page, analytical methods are indexed under methods, the alternative source is covered on the evening primrose oil powder page, and release is described on the quality page. ### 06 How we prove a borage oil lot is borage oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/borage-oil/identity/ Reviewed: 2026-11-19 A borage oil lot is identified by its full fatty-acid profile, not by a single GLA number. Genuine borage carries 18–25% GLA with 30–40% linoleic, 15–25% oleic and small amounts of erucic and nervonic acid; evening primrose oil carries 8–11% GLA with 70–75% linoleic. A blend can be built to hit a GLA figure, so the profile, minor acids, sterol pattern and paper trail are the evidence. In one lineIdentity is the full fatty-acid profile together with the minor acids and the paper trail, because a GLA figure on its own can be blended to order. ## The evidence has to agree Identity is built from agreeing evidence, not from one test. Start with the paper: species, plant part, where the seed came from, where it was pressed or refined, and the lot code. Then look at the oil: appearance, colour, odour and clarity can separate fresh from aged but cannot name the species. The chemical layer is the GC fatty-acid profile, the minor acids and, if the source is disputed, the sterol and tocopherol patterns. The last layer is oxidation: peroxide and p-anisidine values, because a genuine oil that has oxidised is still failing. Agreement is the point. A certificate may name the right species while describing a different oil; a blend can reproduce a GC profile; a pale, clear oil can be oxidised. The layers must point the same way and belong to one lot, so the lot code on the certificate, the drum and the retained sample has to line up. ## The GLA/linoleic ratio and the minor acids Borage oil is not simply a stronger evening primrose oil: its GLA is roughly twice as concentrated, but its linoleic acid is roughly half and it carries erucic and nervonic acids that evening primrose does not. The ratio of GLA to linoleic acid is therefore a more useful marker than GLA alone: borage sits around 0.45–0.83, evening primrose around 0.11–0.16. Typical fatty-acid markers that separate borage from other GLA oils | Marker | Borage | Evening primrose | Blackcurrant | GLA (C18:3 n-6) | 18–25% | 8–11% | 14–19% | Linoleic (C18:2 n-6) | 30–40% | 70–75% | 40–45% | Oleic (C18:1 n-9) | 15–25% | 8–12% | 10–13% | Erucic (C22:1) | About 1–3% | Trace | Trace | Nervonic (C24:1) | About 1–2% | Trace | Trace | GLA : linoleic | About 0.45–0.83 | About 0.11–0.16 | About 0.31–0.48 The ranges are typical, not specifications. The certificate reports the measured profile of the lot, and the erucic and nervonic figures are worth reporting even when they are not release limits, because a dilution or substitution is most likely to disturb them. If the customer buys against a pharmacopoeial monograph, put the erucic and nervonic caps in the specification; the catalog range does not set them. ## What XRD can and cannot show for an oil X-ray diffraction identifies crystalline phases. Borage oil is a liquid triglyceride at room temperature and has no crystal lattice to diffract, so an XRD pattern of the neat oil is not an identity test for the species. The technique becomes relevant when the oil is carried on a powder: the carrier, usually a starch or a modified starch, is crystalline enough to give a pattern, and XRD can show which carrier phase is present or whether a crystalline foreign phase has appeared. Read an “XRD identity” line on a powder certificate as a carrier check. It does not prove that the oil is borage oil, and a pattern that matches a starch reference says nothing about the fatty-acid profile. The oil identity belongs to the GC section and to the sterol data where a source is disputed. A supplier offering a spectral fingerprint as the whole identity argument should be asked which phase it measures and which reference it uses. For a starch carrier, XRD is well suited; for the oil itself, it is the wrong instrument. The certificate should say what each method measures, and the buyer should match the method to the question. ## The routes that matter The first route is dilution: a lower-cost oil with little or no GLA can be blended with a GLA concentrate to reach 18–25%, and the GLA figure alone will pass. Dilution shifts the linoleic and oleic values, while the erucic and nervonic acids fall or disappear; that is why the full profile is the check. The second route is substitution with evening primrose oil: the GLA figure falls short of borage, so it is usually combined with a concentrate, and the high linoleic figure is the tell. The third route is a low-GLA borage oil sold against a high-GLA specification. The species and profile shape are right, but the concentration is at the bottom of the range; the lot is genuine and still the wrong grade for the label. The fourth route is oxidation: the profile stays correct while peroxide and p-anisidine values climb, and the oil is no longer the material the specification describes. The fifth is the alkaloid question: a lot can be genuine borage oil and still carry a PA load that fails the destination limit. The checks follow the routes: full fatty-acid profile with the chromatogram, erucic and nervonic figures, sterol and tocopherol patterns where a blend is suspected, peroxide and p-anisidine values, and a PA screen by LC-MS/MS. No single GLA result covers those five routes, and a certificate that reports only GLA and peroxide leaves the adulteration question open. ## What the identity specification should say Name the species and the plant part, not just the common name: “borage (Borago officinalis) seed oil”. Add the process — cold-pressed or refined — the GLA range and its basis, the full fatty-acid profile with linoleic, oleic, erucic and nervonic, the sterol profile if the customer requires it, and the oxidation limits. State how identity is measured: methyl esters separated by GC-FID, peaks matched to a certified standard, and a column that separates GLA from alpha-linolenic acid. A specification that says “borage oil 20%” or “GLA oil” does not give the laboratory a way to check the source or the grade. A specification that gives the species, the process and the profile does. The certificate should repeat those lines and carry the lot code that matches the pack and the retained sample; a certificate that cannot be tied to the drum is a document, not a trace. ## Five questions for a supplier - Which species and which plant part is the oil from, and is the lot single-source or a blend? - What are the GLA, linoleic, oleic, erucic and nervonic figures on the same lot, with the chromatogram? - Is the grade cold-pressed or refined, and which process steps were applied? - What are the peroxide and p-anisidine values, with methods, and what is the storage history? - What is the PA result, the method and the limit of quantification, and can you send the COA for the lot that will ship? The catalog limits are on the borage oil product page. Release tests are listed on the COA page, the alternative source is covered on the evening primrose oil powder page, analytical methods are indexed under methods, and retained samples are described on the quality page. ### 01 What the COA for phosphatidylcholine actually contains URL: https://nutrition.rainwoodbio.com/products/fatty-acids/phosphatidylcholine/coa/ Reviewed: 2026-11-19 A phosphatidylcholine certificate reports the PC figure by HPLC, the phospholipid class profile, moisture, acid value and peroxide value, plus the heavy-metal and microbiological panels. The PC figure is class-specific, so it is not interchangeable with total phospholipids or with acetone-insoluble matter. The limits in the first table are the catalog gates; the lot certificate is what proves a given pack met them. In one lineThe PC figure is a class-specific HPLC result, and it only means something beside the phospholipid profile, the moisture and the acid value. ## The certificate as a class assay A PC certificate is auditable when each line can be read on its own: the parameter, the method that produced the number, the release limit and the measured result. A bare “conforms” leaves the reader unable to see how the conclusion was reached. The defining line is the PC assay by HPLC. It is not the same line as total phospholipids, and it is not the same line as acetone-insoluble matter. A certificate that reports only the last two has described a phospholipid mixture, not the grade. Release lines on a phosphatidylcholine certificate | Test | Method | Release limit | Appearance | Visual | White to light yellow waxy solid or powder | Identification | Phospholipid profile by HPLC | Profile conforms to the reference | Phosphatidylcholine | HPLC, class separation | ≥90.0% | Moisture | Karl Fischer or loss on drying, as stated | ≤1.0% | Acid value | Titration, mg KOH/g | ≤30 | Peroxide value | Titration, meq O2/kg | ≤5.0 | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent Two figures are often confused. The PC figure answers how much of one phospholipid class is present; the total phospholipid figure answers how much phosphatide the lot carries across all classes. The first is the grade; the second is context, and it is usually reported as a separate line. ## What the PC percentage is a percentage of The HPLC method separates the phospholipid classes and measures the PC peak against a PC reference standard. The certificate should name the column and mobile phase, the detector, the standard and the integration basis. A PC result without a method is a figure without meaning. Detectors differ. Evaporative light-scattering and charged-aerosol detectors respond to the mass of the eluted phospholipid; UV detection at a low wavelength is less specific and can miss the difference between classes. If two suppliers report 90% PC by different detectors, the figures are not automatically comparable. The basis matters too. The catalog sets PC at ≥90.0% by HPLC and moisture at ≤1.0%. The certificate should say whether the PC figure is calculated on the material as received or on the dried basis. With moisture near the limit the two readings differ by about one point, which is enough to move a lot across the release line. A PC figure is also not a purity figure for a single molecule. The CAS number covers a soy-derived mixture of molecular species with different fatty acids, so there is no single molecular weight to convert from. The assay measures the class, not one compound. ## Release limit versus batch result On a well-built certificate, the limit and the measurement sit in different columns, and the method sits beside them. A column that echoes the limit has recorded no result. Fields a batch result should carry | Parameter | Release limit | Result column | PC by HPLC | ≥90.0% | A measured percentage, with the detector and the basis | Moisture | ≤1.0% | A measured percentage and the method | Acid value | ≤30 mg KOH/g | A measured figure | Peroxide value | ≤5.0 meq O2/kg | A measured figure | Heavy metals | Per element | A result for each metal, not one combined total | Microbiology | Counts and absence | Each count and each absence statement “Passes specification” should be something the reader can verify from the figures. For the oxidation lines it is worth seeing both the acid value and the peroxide value, because a lot can pass one and fail the other. ## What moves between batches Fractionation moves the PC figure and the class balance. The starting lecithin, the ethanol fractionation and the number of concentration steps decide how much PC is collected and how much PE, PI and PA remain. Drying moves the moisture; storage moves the acid value and the peroxide value; milling moves the particle size if the grade is a powder. Colour follows the process and the oxidation state. White to light yellow is a wide window, and a shift inside it is not an identity failure. A lot that has darkened, or turned duller, can point to a longer heat hold, a different drying step or an oxidation product while the PC assay still passes. Look at the direction across lots, not at one certificate. A PC figure drifting toward 90, an acid value climbing, or a peroxide value that has doubled across shipments says more than a single result at the centre of the range. The lot code printed on the certificate ought to appear on the pouch, the drum and the retained sample. ## When an outside laboratory is worth using An outside laboratory makes sense when the source is new, the market is new, the potency claim needs evidence the supplier's certificate does not carry, or a result is in dispute. The useful panel is built around the question rather than copied from the certificate. For a potency question, ask for PC by HPLC with the chromatogram, the full phospholipid class profile, total phospholipids by phosphorus and the fatty acid profile by GC. For a condition question, ask for moisture, acid value, peroxide value and appearance. For a source question, add the sterol profile and the residual-solvent panel. Each screen should come with its detection limit. “Not detected” says more about the method than about the lot unless that limit is printed. For a disputed lot, send the referee the retained sample, the supplier's certificate and the agreed specification, and ask for the discriminating tests rather than a second run of the same assay. ## Comparing two suppliers Set six items against each other: the PC figure and its method; the class profile; moisture, acid value and peroxide value; the source and the allergen statement; the heavy-metal and microbiological panels; and the pack and lot code. Agreement on the 90% headline is not agreement on the material if the detector, the basis or the source differs. Traceability is the next question. The certificate should name who manufactured the lot, which lecithin it came from and which fractionation and drying steps were applied. The catalog specification sits on the phosphatidylcholine product page. The lecithin page shows the mixture this grade is fractionated from; the methods library explains the HPLC and phosphorus assays; the quality page sets out the release sequence. The grades page compares the potency and form options, and the identity page covers the source checks. ### 02 Choosing a phosphatidylcholine grade: potency, form and source URL: https://nutrition.rainwoodbio.com/products/fatty-acids/phosphatidylcholine/grades/ Reviewed: 2026-11-19 Phosphatidylcholine is sold as a family of grades that differ in the PC figure, the physical form, the plant source and the degree of modification. The catalog grade is ≥90.0% PC by HPLC, supplied as a waxy solid or a powder, and it is the fraction that a lecithin label does not describe. The grade decides the mass per declared dose, the flow on the line and the allergen statement. In one lineA PC grade is fixed by four choices: the PC figure, the physical form, the plant source and whether the molecule has been modified. ## Why the range exists Lecithin is a mixture; a PC grade is a fraction of it. The range exists because the fraction can be concentrated to different figures, dried into different physical forms, taken from different plants and modified after fractionation. Each choice is a separate specification line, not a marketing variant. The PC figure is the first fork. A 70% grade and a 90% grade are both PC concentrates, but the mass needed for a declared dose differs by nearly 30%. The catalog sits at 90%, which leaves less room for other phospholipids and oil. Source is the second fork. The catalog material is soy-derived, CAS 97281-44-2. A sunflower-derived PC is a different source with a different fatty acid pattern and a different allergen statement; an egg-derived PC is a third. They are not interchangeable under one label, even when the PC figure on the certificate is the same. ## The grades side by side Phosphatidylcholine grades and related products | Grade | PC figure | What else is present | Form | Typical use | PC 70 | About 70% by HPLC | More PE, PI and residual oil than the 90% grade | Waxy solid or powder | Where a lower PC density is acceptable | PC 90 (catalog) | ≥90.0% by HPLC | Residual classes and a small oil fraction | Waxy solid or powder | Declared PC dose in capsules and blends | Soy lecithin (reference) | PC is part of the mixture | PE, PI, PA, oil and sterols | Fluid or powder | Emulsifier, mixed phospholipid source | Hydrogenated PC | Depends on the starting grade | Saturated fatty acids; different oxidation behaviour | Waxy solid | Where a saturated phospholipid is specified | Lyso-PC | Depends on the starting grade | One fatty acid removed; more hydrophilic | Powder or dispersion | Where water dispersibility is the point | Carrier-supported PC | The figure is read on the blend | A declared carrier | Powder | Dry blends and stick packs The table separates two things that are often conflated: the PC figure and the total phospholipid figure. A 70% PC grade can carry a total phospholipid figure above 90%, while a 60% lecithin carries PC as only part of its phosphatide fraction. The two figures answer different questions. Hydrogenated and lyso-PC are different products, not higher grades of the same material. Hydrogenation changes the fatty acid saturation and the oxidation behaviour; enzymatic hydrolysis removes one fatty acid and changes the water dispersibility. Both need their own specification and their own label name. ## Waxy solid, powder and the line The catalog form is a waxy solid or a powder. The waxy solid softens with warmth and can be weighed as a lump or a flake; the powder flows and is easier to blend but takes moisture faster. Neither is a free-flowing crystalline solid, and a hopper designed for a mineral powder may bridge on PC. PC is hygroscopic. An open pouch on a bench picks up water, the surface becomes tacky, and the moisture figure rises. The material is also heat-sensitive: a warm room softens the solid, and a hot hold accelerates hydrolysis and darkening. For a powder, put bulk density, particle size and flow on the specification. For a waxy solid, put the softening behaviour and the pack format on it. A particle-size limit written for a powder cannot be applied to a waxy solid without saying how the sample was prepared, and a flow figure measured on one form says nothing about the other. ## Dose arithmetic for each grade Start with the declared ingredient. A PC claim uses the PC figure as the divisor. A lecithin claim uses the weight of the mixture; a phospholipid claim uses the total phosphatide figure. Three claims, three divisors. For a label that declares 250 mg PC, a 90% grade needs 250 ÷ 0.90 = 278 mg of powder, while a 70% grade needs 357 mg, and a lecithin carrying 20% PC needs 1,250 mg. The figures are arithmetic, not a dose recommendation. They show why a switch of grade changes the capsule size. If the label declares choline rather than PC, the divisor changes again. Soy PC carries about 13% choline by mass, so 250 mg PC delivers roughly 32.5 mg choline; the exact figure belongs to the lot and its fatty acid composition. A choline claim has its own conditions in the destination market and should not be inferred from the PC weight. ## What to write into the grade specification - “Phosphatidylcholine, soy-derived, CAS 97281-44-2, source named.” - “PC ≥90.0% by HPLC; method, detector, standard and basis stated.” - “Phospholipid class profile reported: PE, PI, PA and lyso-PC, with the total phospholipid figure.” - “Moisture ≤1.0%; acid value ≤30 mg KOH/g; peroxide value ≤5.0 meq O2/kg.” - “Heavy metals and microbiology as listed; residual-solvent statement for the extraction route.” - “Form: powder or waxy solid; particle size and bulk density for a powder.” - “Soy allergen and GMO statements attached; destination market confirmed.” Name the basis of the PC figure, not only the number. A certificate that says 90% without saying whether it is as-is or dried, and without naming the detector, has left the grade open to interpretation. The same rule applies to the moisture line: Karl Fischer and loss on drying are different measurements. ## When another grade is the wrong purchase If the claim is on lecithin, a 90% PC grade is the wrong material even though it contains PC: the label names a mixture, and the certificate does not carry the lecithin figures. If the claim is on total phospholipids, a PC figure alone does not answer it. If the formula needs an emulsifier rather than a declared PC dose, the whole lecithin is the simpler purchase. A soy-free claim needs a different plant source, not a lower PC figure. A hydrogenated or lyso-PC claim needs the modified grade and its own specification. A change in grade is a change control: it moves the mass, the label, the allergen statement and possibly the market file. The product hub carries the catalog specification; the lecithin page covers the mixture; the level-four comparison takes the comparison further. The COA page shows how the grade is reported, the identity page covers the source checks, the methods library explains the assays and the quality page sets out release. ### 02.1 Phosphatidylcholine vs lecithin: the isolate and the mixture URL: https://nutrition.rainwoodbio.com/products/fatty-acids/phosphatidylcholine/grades/phosphatidylcholine-vs-lecithin/ Reviewed: 2026-11-19 Lecithin is the mixture; phosphatidylcholine is one phospholipid class within it, and a PC 90 grade is that class concentrated. The two are not two strengths of one ingredient: lecithin is standardised on the total phosphatide fraction, while a PC grade is standardised on a single class measured by HPLC. The 90% and 60% figures count different things, and the dose, the label and the allergen statement follow the name on the certificate. In one lineA 90% PC grade and a 60% lecithin are not the same number in different units: one counts a single phospholipid class and the other counts the whole phosphatide fraction. ## What each headline percentage counts Three numbers appear on lecithin and PC certificates, and they are not interchangeable: acetone-insoluble matter, total phospholipids and PC. Acetone-insoluble matter is a residue after acetone extraction; total phospholipids is a phosphorus calculation; PC is a class-specific HPLC result. A lecithin grade is usually standardised on the first or the second, while a PC grade is standardised on the third. That is why a 60% lecithin and a 90% PC grade cannot be compared by their headline figures. The first says that about 60% of the material resists acetone; the second says that about 90% of the material is one phospholipid class. Both percentages are read against the powder; what changes is the numerator, which is the total phosphatide fraction in one case and a single class in the other. What the headline figure on a certificate counts | Figure | Method | What it counts | Acetone-insoluble matter | Gravimetric acetone extraction | Material that resists acetone, phosphatides plus any other insoluble residue | Total phospholipids | Phosphorus multiplied by a stated factor | The phosphatide fraction across all classes | Phosphatidylcholine | HPLC class separation | One class, measured against a PC standard | Oil | Difference or extraction | Neutral lipid left in the material A certificate that prints one figure and calls it “purity” has hidden which question it answered. Name the method and the quantity the percentage refers to before comparing two materials. ## What the other 10% is A lecithin carries PC, PE, PI and PA, and often oil, sterols and glycolipids. A 90% PC grade has had most of the oil removed and most of the other classes reduced, but the remaining 10% is still a mixture: residual PE, PI and PA, some lyso-PC, a little neutral oil and moisture. The PC figure describes the class, not the whole powder. The residual profile is a specification line, not a rounding error. A grade with 90% PC and 6% PE is a different material from one with 90% PC and 1% PE, even when the headline agrees. Ask for the class profile beside the PC figure, and read the two together. The fatty acid profile adds a second dimension. Soy PC is linoleic-dominant with a measurable alpha-linolenic fraction; sunflower PC has a different pattern; egg PC differs again. The PC figure can agree while the source differs, which is why identity is a profile question and not a single assay. ## Dose arithmetic on the declared figure Dose arithmetic uses the figure the label declares. For 250 mg PC, a 90% grade needs 278 mg, while a lecithin carrying 20% PC needs 1,250 mg. For 300 mg total phospholipids, a 60% lecithin needs 500 mg, while a 90% PC grade is not the right input unless the label is rewritten to a PC claim. If the label declares choline, the divisor is the choline figure. Soy PC carries about 13% choline by mass, so 250 mg PC is roughly 32.5 mg choline. The exact value depends on the PC figure and the fatty acid composition, and it belongs on the certificate rather than in a conversion applied at the balance. These are arithmetic illustrations, not a dose recommendation. The point is that the two materials need different weights for the same label number, and a switch between them changes the capsule or the stick weight and the specification behind it. ## The soy declaration follows the source When both are soy-derived, both carry the soy allergen declaration. In the EU, soy is listed in Annex II of Regulation (EU) No 1169/2011, and the exemption for fully refined soybean oil does not extend to phospholipids. In the US, soy is a major food allergen under FALCPA. A soy-derived PC is not exempt because it is purified. A sunflower-derived PC removes the soy declaration but changes the source statement; an egg-derived PC brings egg into the file. The source is part of the identity, and a change of source is a change control. The allergen statement should name the source, not only the product name. A GMO statement is separate from the allergen statement. A soy source can raise a labelling question under Regulation (EC) No 1829/2003 in the EU, and the buyer's regulatory team confirms the route for the destination. ## Emulsifier, dose ingredient or both Lecithin is used as an emulsifier and as a mixed phospholipid source. Its value comes from the mixture: the classes sit at an oil-water interface together and stabilise a dispersion. A PC grade is used where the formula or the label calls for a declared PC figure, and its surface behaviour is different because the other classes have been reduced. A PC grade is not a drop-in emulsifier for lecithin, and lecithin is not a short route to a PC claim. A formulator who replaces one with the other has changed the ingredient, the mass and the interface behaviour at the same time. None of this makes them interchangeable. They are different purchases, and the specification should say which question the material is there to answer. ## Which one the formula needs Choose lecithin when the function is emulsification, when the label names lecithin, or when a mixed phosphatide source is wanted. Choose the PC grade when the label declares PC, when the formula is built around that class, or when the residual oil and the other classes are a problem for the dose. Choose neither for a soy-free claim; change the source. Choose a hydrogenated or lyso-PC grade only when that modified material is the specification, not as a way to raise the PC figure. The catalog specification is on the phosphatidylcholine product page; the lecithin product page is the separate mixture. The grades page places this comparison in the PC range, the COA page shows how the class figure is reported, the methods library explains the HPLC separation and the quality page covers release. ### 03 Phosphatidylcholine stability: moisture, heat and the pack URL: https://nutrition.rainwoodbio.com/products/fatty-acids/phosphatidylcholine/stability/ Reviewed: 2026-11-19 Phosphatidylcholine takes up water and reacts to heat, and it degrades along two routes at once. Hydrolysis releases free fatty acids and lifts the acid value; oxidation attacks the unsaturated fatty acids, lifts the peroxide value and dulls the colour. A sealed, cool, dark pack slows both, while a water-based dispersion exposes the material most. In one linePhosphatidylcholine fails by hydrolysis and oxidation, and the moisture, heat and oxygen that reach the solid decide which one moves first. ## The solid: water, heat and the two values The catalog limits of moisture ≤1.0%, acid value ≤30 mg KOH/g and peroxide value ≤5.0 meq O2/kg are release gates, not storage allowances. After the pouch is opened, the solid draws water from the air; the moisture rises, the surface becomes tacky, and the water starts to break the ester bonds that hold the fatty acids to the glycerol backbone. That hydrolysis releases free fatty acids, and the acid value climbs. A powder meets the air with more surface than a waxy solid, so it picks up moisture faster and cakes sooner. The waxy solid has a different problem: warmth softens it, the surface stays exposed, and every opening presents a fresh layer. Record the date of opening and the weight left in the pack, because the storage history of the remainder is part of its condition. Oxidation runs alongside hydrolysis but on its own clock. The linoleic acid and the smaller alpha-linolenic fraction in soy PC react with oxygen; the peroxide value rises first, and secondary products darken the colour later. Heat, light and trace metals such as iron and copper speed the reaction. The original foil pouch is the storage container; a clear jar on a bench is an exposure, however briefly it is used. A desiccant assists a sound closure; it does not replace one. Nitrogen flushing is not part of the catalog pack and has to be requested. ## The aqueous dispersion: the most exposed format Water does not dissolve phosphatidylcholine. The molecule hydrates and arranges itself into lamellar or vesicular structures, which is the behaviour that makes it useful at an oil-water interface and also the reason the dispersion is a reaction medium. Hydrolysis proceeds faster in water than in the dry solid, and pH extremes push it further. An emulsion adds its own variables. Homogenisation energy, droplet size, dissolved oxygen, pH and the preservative system each change the rate, and the product may separate or cream before any chemical line moves. A pasteurisation or hot-fill step adds a heat load that the powder never sees. If a liquid is required, protect it from light, hold the pH in a validated range, keep dissolved oxygen low and measure the hold time before filling. Data from the bulk powder does not describe the beverage; the matrix, the process and the pack each change the answer, and the finished product has to be tested as itself. ## What drives degradation Stresses that move phosphatidylcholine during storage | Stress | Effect on the material | Control | Water | Hydrolysis, caking and a lower as-is PC figure | Sealed foil pack; dry store; desiccant as support | Warmth | Faster hydrolysis, softening and darkening | Cool store; controlled warming only | Oxygen | Oxidation of the unsaturated fatty acids | Small headspace; sealed pack; nitrogen on request | Light | Oxidation and colour drift | Opaque or foil pack; dark store | pH | Ester hydrolysis in water | Validate the matrix pH; buffer where needed | Trace metals | Catalysed oxidation | Use chelated raw materials; avoid iron and copper contact | Microorganisms | Microbial growth in a wet dispersion | Validated preservation and hold time The stresses stack: an open pouch in a humid room adds water to heat, and a clear-glass emulsion at neutral pH brings oxygen, light and water into the same container. The practical question is how long this pack, in this store, keeps the lot inside the specification. ## A stability protocol for the ingredient Cover the warehouse with 25 °C at 60% relative humidity and 30 °C at 65% relative humidity, and stress the pack at 40 °C at 75% relative humidity. Add a light-exposure arm, because a dark cabinet does not test photostability. The exposure condition and the duration should be stated, not implied. At each point, test the PC figure by HPLC, the phospholipid class profile, moisture, acid value, peroxide value, appearance and microbiology. For a powder, add the bulk density or flow check the line depends on; for a waxy solid, record softening and surface condition. Report the individual results with the pack and the lot family. The study belongs to the pack that will be bought. A 1 kg pouch and a 25 kg drum differ in surface-to-volume ratio, headspace and opening history, and a summary from one does not describe the other. A repack needs its own data or an explicitly justified bridging study. ## How the finished formula shifts the risk A capsule or tablet keeps bulk water out, but the shell and the excipients can still pass moisture to the fill. Check the acid value and the peroxide value at release and after storage, and look at the fill for darkening or tackiness. A stick pack depends on the seal and the foil; a pinhole is a failure, and the strip should be inspected as well as the powder. An oil blend needs an oxidation strategy: an antioxidant, often a chelator, and a headspace design. The emulsion carries the longest list of variables: pH, heat, oxygen and shear. For a dry blend, the carrier and the seal of the pouch or stick are the controlling parts. An overage belongs in the formula only when the finished matrix supports it. It cannot rescue a pack that admits moisture, and a verbal agreement with production is not a specification. ## How the retest period is assigned There is no universal shelf life for the material across its forms and packs. The retest interval belongs in the specification and rests on a stability file for the exact pack; it is revisited when the source, the form or the pack changes. After the period, re-assay the retained sample before extending use; do not extend by assumption. A number quoted without the pack, the storage condition and the test panel is a claim, not a result. Ask for the stability summary that belongs to the pack on the quotation. The product hub lists the catalog packs; the lecithin page covers the mixture this grade comes from; the COA page covers the release tests. The MOQ page covers pack and lead time, the methods library describes the assays and the quality page describes the release workflow. ### 04 Phosphatidylcholine: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/fatty-acids/phosphatidylcholine/moq/ Reviewed: 2026-11-19 Orders start at 1 kg in a foil pouch; the bulk unit is a 25 kg fiber drum, and the catalog pack is quoted at 1–7 days from confirmation. A quotation is only comparable when it states the PC method and basis, the form, the plant source and the allergen and GMO statements, because those details decide whether two offers describe the same material. In one lineOne kilogram is the minimum because a PC order has to be a traceable lot, with a retained sample and a pack that keeps a hygroscopic solid dry. ## Why the minimum is 1 kg One kilogram is the size at which a purchase becomes a lot rather than a sample. The pack can be opened, assayed and retained, and the certificate that accompanies it refers to the material in that pack. Below that size, material is normally cut from a larger lot and repacked, and the link between the certificate and the bag weakens. The 25 kg fiber drum is a production unit. It lowers handling per kilogram, but it also commits inventory and adds openings. For a hygroscopic solid, every opening is a storage event: moisture enters, the surface becomes tacky, and the acid value starts to move. The right pack is the one the line can finish before the material picks up too much moisture. The MOQ follows the pack, not a volume target. A trial that needs 200 g can still be quoted against the 1 kg pouch, with the remainder retained as a sample; that is a different arrangement from a repack, and it should be written down. ## Packs and formats Standard phosphatidylcholine packs | Pack | Net weight | Form | Notes | Foil pouch | 1 kg | Powder or waxy solid | Foil barrier; close it again after each opening | Fiber drum | 25 kg | Powder or waxy solid | Liner kept closed; lot code repeated on drum and liner The 1 kg foil pouch is the standard trial pack for both the powder and the waxy solid. If a waxy solid will be stacked or shipped warm, a rigid outer pack protects the seal, because the material softens and the pouch can be stressed. If the line needs a particular particle size, bulk density or flow, put it in the enquiry. Those properties decide whether the powder will feed, and they are not implied by the pack size or by the PC figure. ## Lead time and dispatch Dispatch for the catalog pack is quoted at 1–7 days from confirmation. The window ends at dispatch; freight transit, customs clearance and the customer's own quality release sit outside it. A non-standard pack needs its own date, stated separately on the quotation. Ask when the lot will leave, not only how long the lead time is. A drum usually moves on a pallet while a pouch can travel as a parcel, and the Incoterm decides who books the freight and who clears the entry. The document set should leave with the material, not follow it. ## What a quotation needs A quotation can be compared when it lists these six items in writing: - Material and source. Phosphatidylcholine, soy-derived, CAS 97281-44-2, powder or waxy solid. - Assay and condition. PC figure with the HPLC method, detector and basis; class profile; moisture, acid value and peroxide value; metals and microbiology. - Quantity and pack. 1 kg pouch or 25 kg drum; a non-standard pack is quoted separately. - Destination and Incoterm. The country, the delivery point and the trade term. - Documents. COA, specification, SDS, soy allergen statement, GMO statement, origin and residual-solvent statement. - Use and market. Supplement or food, and the market where the finished product will be sold. A quotation that omits the method and the source is not comparable, even when the PC figure matches. Terms are confirmed per order and are not published here. ## The sample is a lot, not a demonstration Qualification is done on the 1 kg pouch. Put it through the PC assay, the class profile, moisture, acid value, peroxide value, metals and microbiology, then retain material from that same pouch. The pouch code, certificate and quotation should all point to one lot. A split for the bench is a repack: label it as one and do not expect the production drum to match a split taken from another lot. If the trial needs a smaller quantity, say so before the order so that the split and its traceability are documented rather than assumed. ## Terms to settle before the first order Before the first shipment, settle the specification revision, the COA for each lot, the retained sample, the retest interval and the change-control route. A change of source or form belongs in that agreement because it can move the allergen statement, the fatty acid profile and the PC figure. A return should be settled by a joint test on the retained sample, with the referee laboratory named in advance. The quality terms sit beside the commercial ones; a quotation that names only the pack and the trade term is incomplete. The product hub carries the catalog specification; the lecithin page covers the mixture; the COA page lists the release tests. The compliance page covers the market file, the methods library describes the assays, and the quality page describes how a lot is released. ### 05 The regulatory file for phosphatidylcholine URL: https://nutrition.rainwoodbio.com/products/fatty-acids/phosphatidylcholine/compliance/ Reviewed: 2026-11-19 Phosphatidylcholine from soy is used as a food and supplement ingredient, and its regulatory file has to connect four things: the specification, the lot certificate, the destination route and the label. The supplier can document the material and the lot; the buyer's regulatory team decides the route for the market. A soy-derived lot also needs the allergen and GMO declarations that the destination requires. In one lineThe specification covers the material; the file proves the route, the contaminant limits and the soy declaration for the market. ## What the file contains Start with the material: which specification version, which plant source and which physical form. Then the lot: the certificate and the raw results behind it. Then the route: the instrument under which the ingredient or the finished product is placed on the market. Then the label: the ingredient name, the allergen and any claim. A folder that holds only the first two is a purchasing record, not a regulatory file. The certificate describes the lot, the technical data sheet describes the specification, and the safety data sheet covers handling. None of the three settles the route. Keep the allergen, GMO, origin and residual-solvent statements in the same version-controlled set as the specification, and retire the old versions when the specification changes. ## European Union Regulation (EC) No 178/2002 provides the general food-law frame, Directive 2002/46/EC covers food supplements, Regulation (EU) No 1169/2011 governs labelling and Regulation (EC) No 1924/2006 governs claims. The buyer's regulatory team confirms the route for the destination member state and checks that the specification describes the material actually placed on the market. Soy appears in Annex II of Regulation (EU) No 1169/2011. The exemption for fully refined soybean oil does not cover phospholipids, so a soy-derived PC must declare soy. A soy source can also raise a labelling question under Regulation (EC) No 1829/2003; that is a separate assessment from the allergen declaration. If a soy-derived PC fraction is placed under the lecithin additive entry E322, authorised by Regulation (EC) No 1333/2008, Commission Regulation (EU) No 231/2012 supplies the purity criteria. That entry caps lead at 2 mg/kg, while the catalog here allows 3 mg/kg; where the additive route applies, the tighter figure governs. Whether a particular PC grade fits the E322 definition is for the buyer's regulatory team to decide. This page does not assert that the route is open for a given lot. Great Britain and Northern Ireland are assessed separately. Great Britain uses the current GB register and GB labelling rules, while Northern Ireland follows the EU framework; the destination decides which applies. ## United States The US review starts with the dietary-supplement framework and the exact ingredient and intended use. The Supplement Facts panel follows 21 CFR 101.36, and dietary-supplement current good manufacturing practice sits in 21 CFR 111. The buyer's regulatory team confirms the basis the ingredient relies on and whether any premarket notification applies to the ingredient or the finished product. Soy is a major food allergen under FALCPA, so a soy-derived PC must be declared; the highly refined oil exemption does not extend to a phospholipid ingredient. Structure/function wording is reviewed separately from the certificate and must be truthful and not misleading. ## Contaminants and limits The catalog limits are gates on the ingredient. The finished-product limit is a calculation from the daily dose, and the destination text decides it. In the EU, Regulation (EU) 2023/915, as of this review, sets maximum levels for lead, cadmium and mercury in food supplements; arsenic has no harmonised level there, so the customer or market limit governs. Check the current consolidated text before relying on a number. Catalog contaminant limits and the finished-product check | Parameter | Catalog limit | What to keep on file | Lead (Pb) | ≤3 mg/kg | Lot result, method, and the finished-product calculation | Arsenic (As) | ≤2 mg/kg | Lot result and the agreed limit for the market | Cadmium (Cd) | ≤1 mg/kg | Lot result, plus any category exception for the market | Mercury (Hg) | ≤0.1 mg/kg | Lot result and method | Microbiology | Counts and absence | The count and the absence statement for the lot Residual solvents sit outside the catalog panel. Where the extraction route uses ethanol or hexane, ask for the statement and the limit behind it, and keep it with the lot file. Ask for each metal separately. A combined “heavy metals” total hides which element drove the figure, and a “not detected” line needs its detection limit to mean anything. ## Label and claims The label states the ingredient name, the amount and the source. A PC claim is a claim on the PC figure, a lecithin claim is a claim on the mixture, and a choline claim is tied to the choline content of the finished product and its own conditions. Those are three different label calculations. No disease-related claim is made here, and a certificate does not authorise one. The brand's reviewer checks the wording against the product, the form and the market; that review is separate from the specification and from the lot release. ## Documents to keep with the lot The lot file should hold the specification version, the COA, the technical data sheet, the safety data sheet, the soy allergen statement, the GMO or non-GMO statement, the origin record and the residual-solvent declaration. Add an E322 compliance statement where that route is used, and any halal or kosher certificate the market needs. Each document should carry a date and a version, and any gap should be identified before the order rather than at the port. ## Checklist before the first order - The specification names the CAS number, the plant source and the physical form. - The PC method, detector and basis are written down. - The COA, TDS, SDS, allergen, GMO, origin and solvent statements are on file. - Each contaminant result is carried through to the finished-product dose. - The label declares soy where the material is soy-derived, and the claim has been reviewed. - The source, process and pack sit under change control. The product hub carries the catalog specification; the lecithin page covers the mixture; the COA page explains the lot certificate. The identity page covers the source evidence, the methods library describes the assays and the quality page sets out the release file. ### 06 How to prove a phosphatidylcholine lot is the named grade URL: https://nutrition.rainwoodbio.com/products/fatty-acids/phosphatidylcholine/identity/ Reviewed: 2026-11-19 A phosphatidylcholine lot is what its certificate says only when four checks agree: the HPLC class assay reaches the declared figure, the phospholipid profile fits a 90% fraction, the fatty acid and sterol patterns fit the plant source, and the moisture, acid value and peroxide value describe a sound lot. The PC percentage on its own cannot tell a 90% grade from a diluted lecithin or from a different source; the profile is what separates them. In one lineIdentity is the PC figure plus the profile: HPLC says how much of the class is present, and the phospholipid, fatty acid and sterol patterns say what the material is. ## The layers of identity Each layer answers a separate question, and one can pass while another fails. The document names the material and the source; the class assay measures the PC figure; the class profile shows how the rest of the phospholipid fraction is built; the source tests compare the fatty acid and sterol patterns with a reference; the condition tests describe hydrolysis and oxidation. Layers of phosphatidylcholine identity | Layer | Question | Test | What it proves | Document | Are the material and source named? | Name, CAS 97281-44-2, source | Paperwork only | Class assay | How much PC is present? | HPLC against a PC standard | The grade, not the source | Class profile | Is the fraction built as expected? | PE, PI, PA and lyso-PC by HPLC | The fractionation and any blend | Source | Which plant is it from? | Fatty acid and sterol profiles by GC | The source claim | Condition | Is the lot sound? | Moisture, acid value, peroxide value | Hydrolysis and oxidation state A supplier can name the material correctly and still ship a blend, a dilution or a different plant source. The later layers are the ones that catch it, and a certificate that stops at the first two has not tested them. ## The ratios that should agree The figures on a PC certificate have to fit one another. The PC result should normally sit at or below the total phospholipid figure, because PC is one class inside that total. The residual PE, PI and PA should be small in a 90% grade; a high PE or PI result points to incomplete fractionation or to added lecithin. Phosphorus should reproduce the total phospholipid figure when the stated factor is applied, and the choline result should fit the PC figure. Ratios to check on a phosphatidylcholine certificate | Ratio | What it tests | A shift suggests | PC against total phospholipids | PC sits inside the total | A different method, a blend or a calculation error | PC against PE, PI and PA | The residual pattern of a 90% grade | Incomplete fractionation or added lecithin | Phosphorus against total phospholipids | The stated factor reproduces the total | Dilution or an inconsistent factor | Choline against PC | About 13% choline in soy PC by mass | A different source, a blend or a non-PC choline salt | Alpha-linolenic acid in the fatty acid profile | Soy retains a measurable alpha-linolenic fraction | A sunflower or egg source | Sterol profile | The sterol pattern of soy against sunflower | A source claim that does not match For a 90% PC powder, the choline arithmetic lands near 12% by mass. That is a consistency check, not a label claim: the exact value depends on the lot and its fatty acid composition, and a choline claim has its own conditions in the destination market. ## Why X-ray diffraction does not identify PC The catalog material is a wax, not a crystal. Phosphatidylcholine is amorphous or semi-solid at room temperature, so an X-ray scan shows a broad hump with no sharp reflections, and no reference pattern identifies “soy PC”. A certificate that reports diffraction conformity without naming a phase has reported nothing the reader can check. The technique still has a use: sharp peaks in a powder reveal a crystalline carrier or filler, and their positions can identify it. That is a check on the carrier, not proof of the phospholipid. FTIR shows the phosphate and ester bands and supports the phospholipid assignment, but it does not separate soy from sunflower. The class, fatty acid and sterol methods do. The methods library sets out the reach and the blind spot of each technique. ## Reading a substituted lot Common phosphatidylcholine substitutions and the signals | Adulterant | What it does | Signal | Test | Lecithin or deoiled lecithin | Lowers the PC figure and lifts the other classes | PC low; PE, PI and PA high; AI out of line with the PC figure | HPLC class profile, AI | Soybean oil | Adds neutral oil and dilutes the PC | PC low; oil pattern in the fatty acids | HPLC, fatty acid GC | Sunflower lecithin or PC | Changes the source and the allergen statement | Little or no alpha-linolenic acid; sterol mismatch | Fatty acid and sterol GC | Synthetic or single-species PC | Raises the PC peak with a narrow fatty acid pattern | PC high; no alpha-linolenic fraction; one dominant fatty acid | Fatty acid GC, profile | Water | Raises moisture and lowers the as-is PC figure | Moisture high; PC low as-is | Moisture, PC | Residual solvent | Carries solvent residue from the extraction | Headspace result; odour | Residual-solvent GC Colour is the least reliable evidence. White to light yellow covers a broad range, and a blend can be made to match it. The class profile, the fatty acid pattern and the mass balance are harder to imitate. ## Writing identity into the specification - “Phosphatidylcholine, soy-derived, CAS 97281-44-2, source named.” - “PC ≥90.0% by HPLC; method, detector, standard and basis stated.” - “Phospholipid class profile (PC, PE, PI, PA and lyso-PC) reported for the lot.” - “Fatty acid profile by GC, with the alpha-linolenic fraction reported; sterol profile available.” - “Moisture ≤1.0%; acid value ≤30 mg KOH/g; peroxide value ≤5.0 meq O2/kg.” - “Heavy metals, microbiology and residual-solvent statement as agreed for the lot.” - “Soy allergen and GMO statements attached; form and particle size for a powder.” ## Five questions for the supplier - Which plant source is this lot, and which lecithin lot was it fractionated from? - Can you provide the PC chromatogram and the full phospholipid class profile, not only the percentage? - What do the fatty acid and sterol profiles show, and do they fit the declared source? - What are the moisture, acid value, peroxide value and residual-solvent results for this lot? - If the grade or the source is disputed, will you test the retained sample jointly with us? Those five answers form an identity file; one PC percentage does not. The product hub carries the catalog specification; the lecithin page covers the mixture. The COA page shows where each figure sits on the certificate, the grades page compares the potency and form, the methods library describes the separation and the quality page covers release. ### 01 What the COA for pomegranate seed oil actually contains URL: https://nutrition.rainwoodbio.com/products/fatty-acids/pomegranate-seed-oil/coa/ Reviewed: 2026-11-19 A pomegranate seed oil certificate answers two questions that are easy to confuse: what the oil is, and what condition it is in. The fatty acid profile, led by punicic acid, identifies the material; free fatty acid, peroxide value and moisture describe how the seed and the oil have been handled. Each line needs a method, a release limit and a result for the lot, not a restatement of the catalogue range. In one lineThe punicic acid figure says what the oil is, the free fatty acid and peroxide value say how it has been handled, and a certificate needs both before the lot can be released. ## The certificate as a test report A useful certificate can be read line by line. For every parameter the buyer needs the test, the method, the limit the lot was released against, and the measured result. A row that says only “conforms” moves the evidence out of the document and into a conversation. The first block is the profile: punicic acid, the conjugated C18:3 that makes the oil distinctive, with linoleic and oleic beside it and palmitic, stearic and minor acids in the balance. The second block is the condition of the oil: free fatty acid from hydrolysis, peroxide value from primary oxidation, moisture, and the contaminant and microbiology panels. Release specification for cold-pressed pomegranate seed oil | Test | Method | Limit | Appearance | Visual | Clear to slightly hazy; pale yellow to golden | Identification | GC fatty acid profile | Conforms to the reference profile | Punicic acid (C18:3, conjugated) | GC-FID of fatty acid methyl esters | 60.0–80.0% of total fatty acids | Linoleic and oleic acids | GC-FID of fatty acid methyl esters | 5.0–10.0% each of total fatty acids | Free fatty acid | Titration as oleic acid | ≤0.50% | Peroxide value | AOCS Cd 8b-90 or ISO 3960 | ≤5.0 meq O₂/kg | Moisture | Karl Fischer | ≤0.1% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent ## Percent of fatty acids, percent of oil GC results are normally reported as area percentages of the fatty acid methyl esters, normalised to the total fatty acid content. That is a share of the fatty acids, not a mass of oil. The glycerol backbone is not measured in the FAME run, so a punicic figure of 70% does not mean 70 g of punicic acid in 100 g of oil. A conversion factor near 0.95 is usual when the figure has to be expressed on the oil. The other figures have their own bases. Free fatty acid is a titration expressed as oleic acid and covers only the unesterified fraction. Peroxide value is measured per kilogram of oil and reports hydroperoxides, the first products of oxidation. Moisture is measured on the oil as sold. The certificate should name the basis in the row, not in a footnote. The punicic figure also needs its isomer named: a C18:3 peak is not proof of the conjugated acid unless the method uses a punicic standard, because alpha-linolenic acid has the same carbon count and a different retention. ## Release limit, batch result and the sum check A limit is the acceptance boundary; a result is what the laboratory measured. They should not share a cell. The result column should carry the measured value, method and test date, and the certificate should identify the lot. What the lot record should show for each test | Test | Limit | Expected record | Punicic acid | 60.0–80.0% of total fatty acids | Measured value, chromatogram and peak identification | Linoleic and oleic acids | 5.0–10.0% each | Measured values from the same run | Free fatty acid | ≤0.50% | Measured percentage as oleic acid | Peroxide value | ≤5.0 meq O₂/kg | Measured value with method and test date | Moisture | ≤0.1% | Measured value | Metals and microbiology | Per element and per test | A result per element; counts and absence statements The named fatty acids should stay below 100.0% when palmitic, stearic and the minor acids are also present. A profile that reports 80% punicic, 10% linoleic and 10% oleic has either rounded every figure to the edge or left peaks out of the integration. A full profile accounts for every peak. Peroxide value needs a date: hydroperoxides decompose, so a PV can fall while the oil becomes more oxidised. A p-anisidine value is the companion test when oxidation is the question; neither it nor the calculated TOTOX figure is in the catalogue specification. ## Why two good lots can differ Punicic acid follows the cultivar, the growing season and the seed lot. The catalogue range of 60.0–80.0% is wide enough to cover that variation, so a lot at 62% and a lot at 78% can both be within specification and still behave differently in a formula. A buyer who needs a narrower window should write it into the purchase specification rather than assume the catalogue range is the working range. The condition figures move with handling. Seed that is cracked, damp or held warm raises free fatty acid before the press. Heat, light and air raise peroxide value after it. A cold-pressed oil is not refined, so colour, flavour and some of the free fatty acid pass into the bottle; filtration removes sediment but does not undo oxidation. Colour is the least numerical signal: a darker oil may be oxidised, come from a different seed batch, or have been pressed warmer. The lot code on the certificate should match the bottle, the drum and the retained sample. A certificate that cannot be tied to a pack is a description of a product, not a release record for a lot. ## When to order an outside test Outside testing earns its place when the document leaves a specific question open: a new source, a first shipment, a punicic figure near an edge, a suspected blend or a disputed result. A GC-FID run with the chromatogram, column, standard and integration addresses identity and profile. Sterol and tocopherol results support authenticity. FFA, PV and p-anisidine address condition. Metals, pesticides and a PAH screen address the seed source and the drying or heating history. Ask for the limit of quantification with any “not detected” statement. Without it, the result describes the sensitivity of the method, not the sample. Keep the chain of custody intact: the laboratory should test the retained sample and name the lot in its report. If a result is challenged, a joint retest aimed at the disputed question is more useful than a second full panel. ## What to compare between suppliers Two offers can quote the same punicic range and describe different oils. Compare the full profile with its isomer identification, the condition figures with test dates, the authenticity data, the process record and the lot traceability. A punicic percentage without a chromatogram is a conclusion without evidence. The catalogue specification sits on the pomegranate seed oil product page. The grade choice is on the grades page; the identity tests are on the identity page; the GC and wet-chemistry methods are indexed at analytical methods; the release workflow is on the quality page. The evening primrose oil powder page shows how a carrier changes the same kind of specification. ### 02 Cold-pressed, refined or powdered: choosing a pomegranate seed oil grade URL: https://nutrition.rainwoodbio.com/products/fatty-acids/pomegranate-seed-oil/grades/ Reviewed: 2026-11-19 Pomegranate seed oil is sold as a cold-pressed oil, and the grade question is what happens after the press: whether the oil is left unrefined, refined for colour and free fatty acid, or sprayed onto a carrier as a powder. The punicic acid range remains the headline, but the condition figures, the colour and the handling change with the grade. The catalogue grade here is the cold-pressed oil. In one lineThe grade changes the colour, the free fatty acid and the peroxide value before it changes the punicic acid figure, and the powder changes the handling. ## Why the grade is a process decision Pomegranate seed oil starts as a seed and a press. The catalogue grade is cold-pressed and unrefined: the seed is cleaned, pressed without a solvent, and the oil is settled or filtered. That leaves the colour, the flavour and some of the free fatty acid in the oil. A refined grade adds neutralisation, bleaching and deodorisation; those steps lower free fatty acid and colour, remove odour, and also strip part of the tocopherol fraction. Heat in deodorisation can move the conjugated geometry, so a refined lot should be re-analysed rather than assumed to match the cold-pressed profile. A powder grade sprays the oil onto a carrier, and the oil load, the carrier and the particle size become new specification lines. The grade is a process decision with analytical consequences, not a marketing label. The same seed can produce three materials that behave differently in a softgel, a stick pack or an emulsion. ## Cold-pressed, refined and powder side by side Pomegranate seed oil grades compared | Property | Cold-pressed (catalogue) | Refined | Powder on carrier | Punicic acid | 60.0–80.0% | Re-test after refining | Set by the oil load | Free fatty acid | ≤0.50% | Usually lower | Follows the oil | Peroxide value | ≤5.0 meq O₂/kg | Controlled at release | Surface area raises risk | Colour | Pale yellow to golden | Lighter, less odour | Off-white to pale | Tocopherols | Retained | Reduced | Diluted by carrier | Label | Pomegranate seed oil | Pomegranate seed oil | Oil and carrier named | Typical use | Softgel, oil blend | Colour-sensitive formula | Stick pack, dry blend The table describes what each grade is, not what is in stock. The catalogue grade is the cold-pressed oil; a refined grade or a powder is a separate quotation and a separate specification. ## Colour, clarity and the cold-press signature Cold-pressed pomegranate seed oil is pale yellow to golden and clear to slightly hazy. The haze is usually wax or fine sediment; the catalogue allows it, so a filtered oil and a settled oil can both conform. Colour moves with the seed lot and the press temperature, and it darkens as the oil oxidises. A green tint suggests a different seed or a blend; a red-orange oil suggests rosehip, not pomegranate. “Cold-pressed” has no single legal definition, so ask for the press temperature, the filtration step and a statement that no solvent was used. A refined oil is lighter and has less odour, but colour alone does not prove the grade. Taste and smell are sensory checks, not release tests. ## What the grade does to the dose The oil is not standardised to a single punicic figure. A formula that targets a punicic acid amount has to calculate the oil mass from the certificate figure. At 70% punicic acid, 500 mg of punicic acid needs about 714 mg of oil; at 80%, about 625 mg. These are arithmetic examples, not intake recommendations. The difference matters in a softgel, where the fill weight and the capsule size are fixed: a weaker oil can push the fill beyond the shell that was qualified. In a powder, the oil load sets the scoop weight and the carrier appears on the label. In an emulsion, the oil load and the droplet size set the appearance and the oxidation rate. A change from oil to powder is a change of dosage form, not a packing choice. ## What to write into the specification - “Pomegranate (Punica granatum L.) seed oil, cold-pressed, from the seed.” - “Punicic acid 60.0–80.0% of total fatty acids by GC-FID; linoleic 5.0–10.0%; oleic 5.0–10.0%.” - “Free fatty acid ≤0.50% as oleic acid; peroxide value ≤5.0 meq O₂/kg; moisture ≤0.1%.” - “Appearance: clear to slightly hazy, pale yellow to golden.” - “Press temperature, filtration, and any added antioxidant declared.” - “Heavy metals and microbiology as listed; lot code on pack, COA and retained sample.” For a powder grade, add the oil load, carrier identity, particle size and homogeneity. For a refined grade, add the process and a re-test of the profile. The specification must say which grade it describes; one line that says “pomegranate seed oil” does not. ## When the cold-pressed grade is the wrong buy The cold-pressed grade is the wrong buy when the formula cannot tolerate its colour or flavour, when the free fatty acid ceiling is tighter than 0.50%, or when a dry mix needs a free-flowing powder. A refined grade may solve the colour and taste, but it is a new material for the label and the stability file, and the punicic profile has to be re-checked. A powder solves the dry mix, but it adds a carrier to the label and a surface area that oxidises faster. If the formula needs a narrow punicic figure, the catalogue range may be too wide. Set a purchased range or choose a different ingredient, because a concentrate is a different material with a different label. The cold-pressed oil is the right starting point for a softgel or an oil blend where the colour and the natural tocopherols are part of the product. The catalogue specification is on the pomegranate seed oil product page. The comparison with rosehip is on the pomegranate versus rosehip page; oxidation and packing are on the stability page; the release tests are on the COA page. The evening primrose oil powder page shows how a carrier changes an oil specification, and analytical methods explains the GC work behind the profile, and the quality page covers release. ### 02.1 Pomegranate seed oil vs rosehip oil: punicic acid against linoleic and ALA URL: https://nutrition.rainwoodbio.com/products/fatty-acids/pomegranate-seed-oil/grades/pomegranate-seed-oil-vs-rosehip-oil/ Reviewed: 2026-11-19 Pomegranate seed oil and rosehip oil are both cold-pressed specialty seed oils, but their fatty acid profiles point in different directions. Pomegranate seed oil is dominated by punicic acid, a conjugated C18:3 at 60–80% of total fatty acids; rosehip oil is dominated by linoleic acid at roughly 45–55%, with alpha-linolenic acid at roughly 20–35% and no significant punicic acid. A formula, a label or a specification written for one is not satisfied by the other. In one linePomegranate seed oil is built around punicic acid, a conjugated C18:3; rosehip oil is built around linoleic acid and alpha-linolenic acid, so the two are not interchangeable by name or by analysis. ## Two fatty acid profiles, one clear fork Pomegranate seed oil and rosehip oil compared by fatty acid | Fatty acid | Pomegranate seed oil | Rosehip oil | Why it matters | Punicic acid (C18:3, conjugated) | 60.0–80.0% | Not a significant component | The defining acid | Linoleic acid (C18:2) | 5.0–10.0% | About 45–55% | Rosehip is linoleic-dominant | Alpha-linolenic acid (C18:3 n-3) | Not the main C18:3 | About 20–35% | A different isomer | Oleic acid (C18:1) | 5.0–10.0% | About 15–20% | Both contain oleic acid | Palmitic and stearic acids | Low single digits, part of the balance | About 3–5% and 1–3% | Minor acids | C18:3 character | Conjugated cis-9, trans-11, cis-13 | Methylene-interrupted 9, 12, 15 | The analytical fork The pomegranate rows are the catalogue specification. The rosehip rows are typical published ranges, not a specification; rosehip composition moves with species, origin and season, so a buyer needs the certificate's own figures. Both oils are high in polyunsaturated fat, which is why both need protection from oxygen, but the similarity stops at the fatty acid class. ## The C18:3 region is where the methods part Both oils are analysed by GC of the fatty acid methyl esters, and the C18:3 region is where the methods part company. Punicic acid is a conjugated triene; alpha-linolenic acid is methylene-interrupted. They have the same carbon count and mass, so a method that reports a single “C18:3” figure cannot tell them apart. The method needs a polar capillary column, a punicic acid methyl ester standard and an alpha-linolenic standard, and the report should name the isomer behind the peak. A certificate that says “C18:3 70%” for pomegranate seed oil has not shown that the peak is punicic acid. Iodine value and refractive index are similar for the two oils and do not settle the question. Sterol and tocopherol patterns support the profile; the tocopherol fraction of pomegranate seed oil is dominated by gamma-tocopherol, which is a useful check, but the isomer-specific GC is the identity test. ## Colour helps in a bottle, not in a softgel Pomegranate seed oil is pale yellow to golden and clear to slightly hazy. Rosehip oil is reddish-orange to amber because of its carotenoids, and the colour survives a cold press. The difference is obvious in a bottle and useless in a softgel, where the shell hides it. Colour is a weak identity signal: a refined oil is lighter, a blend can be adjusted, and a pale rosehip fraction can look like pomegranate. Use colour as a first look, not a release test. “Cold-pressed” is a process description without a single legal definition, so ask for the press temperature and the filtration step on both oils. ## Both oxidise, but not in the same way Both oils are highly unsaturated and both oxidise, but the chemistry differs. Punicic acid has three conjugated double bonds, which react readily with oxygen and can polymerise; an oxidised pomegranate oil darkens and can become viscous. Rosehip oil is rich in linoleic and alpha-linolenic acid, the classic autoxidation substrates, and alpha-linolenic acid oxidises particularly quickly. For both, peroxide value measures the early hydroperoxides and p-anisidine value measures the secondary aldehydes. A low PV with a high p-AV is not a fresh oil. The release limit of PV ≤5.0 meq O₂/kg is a gate, not a shelf-life guarantee; the pack, the headspace and the storage temperature decide what happens after release. Both oils want an amber or opaque pack, a low-oxygen headspace and a cool, dark store. A blend of the two is a third material with its own oxidation rate, and it should be measured rather than calculated from the components. ## What the label and the specification must name The label has to name the plant and the part. “Pomegranate seed oil” means oil pressed from the seeds of Punica granatum; “rosehip oil” usually means Rosa canina seed oil, but some products are seed and fruit blends, so the plant part should be written out. If the label declares punicic acid, the specification must test it; if it declares alpha-linolenic acid or an omega-3 content, pomegranate seed oil cannot supply it. A nutrition claim about omega-3 fatty acids belongs to the rosehip side and only if the conditions are met. For a cosmetic, the INCI names differ; that is a different regulatory file. The brand's reviewer confirms the wording for the destination. ## When to choose which Choose pomegranate seed oil when the formula is built around punicic acid: a softgel, an oil blend or a product whose identity is the conjugated C18:3. Choose rosehip oil when the formula is built around linoleic and alpha-linolenic acid, or when the colour and the carotenoid content are part of the cosmetic concept. Do not swap one for the other to solve a supply problem: the oil mass needed to deliver a target fatty acid changes, the label changes, and the stability data belongs to the new oil. If a formula targets a punicic acid amount, rosehip oil cannot deliver it; if it targets alpha-linolenic acid, pomegranate seed oil cannot. A blend of the two is a third material with its own profile and label. The pomegranate seed oil product page carries the catalogue specification; the grades page sets out the cold-pressed, refined and powder options; the identity page explains the isomer test. The evening primrose oil powder page is a second example of a seed-oil specification, analytical methods covers the GC work, and the quality page describes release. ### 03 Pomegranate seed oil oxidises; the pack, the headspace and the light decide its shelf life URL: https://nutrition.rainwoodbio.com/products/fatty-acids/pomegranate-seed-oil/stability/ Reviewed: 2026-11-19 Pomegranate seed oil fails by oxidation rather than by microbial growth. Punicic acid carries three conjugated double bonds, and oxygen, light and heat convert it into hydroperoxides and then into secondary products that change the smell, the colour and the analysis. The pack, the headspace and the storage temperature decide how long the oil stays inside its peroxide and free fatty acid limits. In one linePunicic acid is the reason the oil is valued and the reason it fails: three conjugated double bonds react with oxygen, and the pack has to keep oxygen and light out. ## The sealed pack: oxygen, light and moisture The sealed pack is the first barrier. The oil is not a powder, but moisture still matters: the specification allows no more than 0.1%, and water at an oil interface encourages hydrolysis, which raises free fatty acid. The bigger variable is oxygen in the headspace. A bottle filled to the shoulder leaves less air than one filled halfway, and a drum with a nitrogen blanket starts with less oxygen than one sealed on air. The amber bottle and the HDPE drum keep most light out while they are closed; a bottle left open on a bench is a different storage condition. Keep the pack in the dark, below the temperature at which oxidation accelerates, and let a cold pack equilibrate before opening so that condensation does not form on the oil. ## There is no aqueous solution; the emulsion is the stress case The oil is used as a softgel fill, an oil blend or an emulsion. The emulsion is the stress case because the oil-water interface exposes a large surface to oxygen and to metal ions. Emulsifier choice, droplet size, pH, dissolved oxygen and the heat load of homogenisation all change the rate. A bulk oil stability result does not transfer to a beverage or a cream. If a liquid format is unavoidable, validate the finished matrix, not only the oil. ## What drives oxidation Factors that move pomegranate seed oil during storage | Factor | What it does | Control | Oxygen | Forms hydroperoxides; starts a chain reaction | Low headspace; nitrogen; sealed pack | Light | Photooxidation; colour change | Amber or opaque pack; dark store | Heat | Accelerates oxidation and hydrolysis | Cool store; controlled process | Metals | Iron and copper catalyse oxidation | Stainless contact; chelator in formula | Moisture | Raises free fatty acid at interfaces | Dry seed; sealed pack | Tocopherols | Natural antioxidants, consumed over time | Measure at release; do not rely on them | Time | Cumulative exposure | Short hold; first in, first out The factors interact. A warm, bright, half-empty bottle is worse than the sum of three separate effects, and a softgel shell that is clear combines light exposure with a large fill surface. ## A stability protocol for the oil A useful protocol states the pack, the storage condition, the time points and the tests. Long-term storage at 25 °C/60% relative humidity and accelerated storage at 40 °C/75% relative humidity cover the warehouse; a light-exposure arm following the standard photostability design covers the failure mode a dark incubator misses. Test appearance, peroxide value, p-anisidine value, free fatty acid, moisture, punicic acid by GC and tocopherols at each point. For a softgel, inspect the shell; for an emulsion, test the matrix at its process pH and heat load. Plot PV and p-AV rather than reading only the endpoint. PV rises and then falls as hydroperoxides decompose, so a low final PV can hide a peak. Ask for the raw results, the pack, the lot family and the test dates; a pass statement without the curve is a conclusion without the evidence. ## What the finished formula adds A softgel shell is an oxygen barrier but not an absolute one, and an opaque shell protects the fill from light. An emulsion adds an interface, an emulsifier and usually a metal chelator; the droplet size and the homogenisation heat load matter. A powder on carrier exposes oil on the particle surface, so the oil load and the carrier porosity change the rate. An oil blend dilutes the punicic acid and changes the oxidation kinetics; measure the blend rather than calculating it from the components. An overage is a formulation decision; it does not repair a pack that lets oxygen in. ## How the shelf life is set We do not publish a single shelf-life number, because the pack and the storage condition set it. The assigned retest period belongs on the specification and is supported by the stability file for that pack. After the retest period, re-assay the retained sample before extending use; do not extend by assumption, and do not carry a bulk figure across to a repacked bottle. A date mark without a pack, a condition and a test panel is not a shelf life. The catalogue specification is on the pomegranate seed oil product page; the release tests are on the COA page; packaging and lead time are on the MOQ page. The analytical methods index explains the GC work, the quality page describes the release file, and the evening primrose oil powder page shows how a carrier changes the stability question. ### 04 Pomegranate seed oil: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/fatty-acids/pomegranate-seed-oil/moq/ Reviewed: 2026-11-19 Pomegranate seed oil starts at 1 kg in an amber bottle; a 25 kg HDPE drum is the production pack. The standard lead time is 1–7 days. To turn an enquiry into a firm quotation, the supplier needs the specification, the pack, the destination and Incoterm, the document list and the intended use. In one lineThe order starts at 1 kg in an amber bottle, and the 25 kg drum is the production unit; the pack is what makes the lot traceable. ## Why the minimum is 1 kg One kilogram is enough to run a bench trial, hold a retention sample and send a portion to an outside laboratory, and the bottle can move as a parcel. Each bottle carries a lot code, so the sample, the certificate and the pack can be connected. A smaller quantity usually means decanting a drum, which adds a handling step and breaks that connection. The drum reduces handling per kilogram, but it ties up stock and sits in storage longer. The minimum follows from the pack, not from a sales target. ## Bottles, drums and powder packs Standard pomegranate seed oil packs | Container | Fill | Role | Handling | Amber glass bottle | 1 kg | Trial, sample, small batch | Light protection; close after use | HDPE drum | 25 kg | Production | Liner; lot code; store dark | Powder on carrier | On request | Dry blend, stick pack | Oil load and carrier defined | Nitrogen-flushed pack | On request | Longer hold | Lower oxygen in the headspace At about 0.92 g/mL, 1 kg occupies roughly 1.1 L and 25 kg roughly 27 L; headspace is part of the pack design. HDPE is opaque, not a guarantee against light, so the drum still belongs in a dark store. A powder is a separate specification, not a different bottle. ## Lead time and dispatch Order confirmation starts the 1–7 day clock. Picking, paperwork and dispatch sit inside that window; freight transit, customs and the buyer's own release sit outside it. A powder, a nitrogen flush or a non-standard fill adds time, and the quotation should say so. Ask for a dispatch date as well as a lead time. A bottle can ship as a parcel and a drum on a pallet; the Incoterm assigns the freight booking and the entry clearance. ## What a quotation needs Six details make two quotations comparable: - Oil and plant part. Pomegranate seed oil, cold-pressed, Punica granatum, pressed from seed. - Specification. Punicic 60.0–80.0%, linoleic and oleic 5.0–10.0%, FFA, PV, moisture, metals and microbiology. - Fill and container. 1 kg bottle, 25 kg drum, or powder on carrier. - Destination and trade term. The country, the port or address, and the Incoterm. - Documents. COA, TDS, SDS, allergen, GMO, origin, pesticide, PAH and solvent statements as needed. - Use and market. Supplement, food or cosmetic, and the country of sale. Without the plant part, the grade and the market, a quotation is only a description. Commercial terms belong on the quotation itself. ## The sample is a lot, not a demonstration The 1 kg bottle is the qualification unit. Run the GC profile with the punicic standard, plus FFA, PV, moisture and metals, before committing to a drum, and keep a retention sample from the same bottle. The lot code should appear on the sample label, the certificate and the quotation. If the code cannot be traced, the material is a demonstration, not a qualified lot. A bench-size split from a drum is a repack and needs its own record; do not assume it shares a lot with the production drum. ## Terms to settle before the first order The quotation covers the commercial side: trade term, container, lead time and documents. The quality side belongs in the same conversation: which specification revision applies, the COA per lot, the retention sample, the retest period and the change-control route. A quality agreement before the first production order is easier than a dispute afterwards. If a lot fails the agreed specification, handle it through the retention sample and a joint retest, not a photograph. A change to the specification is a new agreement, not a line on a purchase order. The catalogue specification is on the pomegranate seed oil product page; the release tests are on the COA page; the market file is on the compliance page. The MOQ glossary entry defines the term, the quality page describes the release file, the analytical methods index explains the GC profile, and the evening primrose oil powder page shows a second oil pack format. ### 05 The regulatory file for pomegranate seed oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/pomegranate-seed-oil/compliance/ Reviewed: 2026-11-19 Pomegranate seed oil is a food oil pressed from the seeds of Punica granatum, and its regulatory file is built from the specification, the lot certificate, the contaminant results and the label. The destination decides the route: a food supplement, a food ingredient and a cosmetic are three different files. The buyer's regulatory team confirms which route applies before the first order. In one lineThe specification describes the oil; the regulatory file shows the route, the contaminant limits and the label for the destination. ## What the file has to establish A complete file answers four questions. What is the material, and which specification version is being bought? Which lot is being released, and what does its certificate report? Which limits and label rules apply to the finished product? And what changes if the seed source, the process or the pack changes? The certificate answers the lot question, the technical data sheet answers the specification question, and the safety data sheet answers the handling question. None of them answers the route question on its own. The oil is not a single chemical: the file follows the plant, the part and the process. “Pomegranate seed oil” without the plant part and the press record is not a complete description, and a folder of undated documents is not a file. ## European Union The EU file starts with general food law (EC) 178/2002, the food supplements directive 2002/46/EC and the labelling regulation (EU) 1169/2011. Contaminants are checked against the current regulation, (EU) 2023/915, and pesticide residues against (EC) 396/2005. Hygiene, traceability and the nutrition and health claims regulation (EC) 1924/2006 sit alongside them. The novel-food regulation (EU) 2015/2283 is a separate question: the buyer's regulatory team confirms whether the seed oil has a history of use in the EU before the cut-off and whether a novel-food route is needed. The fruit's history is not automatically the seed oil's history, and this page does not assert that either route applies. ## United States In the United States the route depends on the intended use. A dietary supplement sits under DSHEA, with the dietary ingredient basis confirmed by the brand and the label reviewed as a Supplement Facts panel; a food use has a different basis, and a cosmetic use is a different file again. The buyer confirms the basis and the NDI notification or GRAS position where one applies; the supplier cannot decide the brand's route. Current good manufacturing practice for supplements sits in 21 CFR 111, and the allergen declaration has to cover the oil and anything added to it, including a carrier. A cosmetic safety assessment does not belong in a supplement folder. ## Contaminants to convert to the finished serving The catalogue limits below are supplier gates, not the destination limits; the stricter of the two applies. A result in mg/kg of oil is not an exposure until it is multiplied by the oil mass in the finished serving. Contaminant limits and the evidence a market file should carry | Parameter | Catalogue limit | What the file should show | Lead | ≤3 mg/kg | Lot result, method, finished-serving calculation | Arsenic | ≤2 mg/kg | Lot result and method | Cadmium | ≤1 mg/kg | Lot result and the category rule | Mercury | ≤0.1 mg/kg | Lot result and method | Pesticides | No catalogue line | Multi-residue screen, LOQ, fat-soluble residues | PAH4 | No catalogue line | Result where drying or heating raises the risk A refined grade adds 3-MCPD and glycidyl ester questions and a solvent-residue check; a cold-pressed grade should be solvent-free, but the statement still belongs on file. Mineral oil hydrocarbons and packaging migrants are worth a screen when the oil is stored in a lined drum or a printed pack. ## Claims and process wording No disease claim belongs on the label or in this file. A composition statement such as “punicic acid 60–80%” is not a health claim, but it still has to be true for the lot and consistent with the specification. “Cold-pressed” describes a process, not a benefit. “Rich in” is a nutrition claim with conditions, and “antioxidant” is a claim; the brand's reviewer checks the wording against the market's claim rules. The tocopherols naturally present in the oil are a composition fact, not a claim. This page is not label copy. ## Documents to keep with the lot Records that support a pomegranate seed oil market file | Document | What it covers | What to check | Specification | Identity, profile and limits | Revision and date | COA | Lot results | Lot code and test dates | SDS | Handling and hazards | Revision | Allergen statement | Oil and carrier | Facility and carrier | GMO statement | Inputs and process | Scope | Origin statement | Seed origin | Country or region | Pesticide, PAH, solvent | Results | Lot and LOQ | Organic, halal, kosher | If claimed | Certificate scope and id Each document should identify the lot or the specification version it supports. An undated statement is a description, not evidence. ## Before the first order - Product name, plant part, process and specification version are named. - The destination and route are confirmed by the buyer's regulatory team. - COA, TDS, SDS, allergen, GMO, origin, pesticide, PAH and solvent statements are on file. - Contaminant results are converted to the finished serving. - The label and claims are reviewed for the destination. - Pack, retest period and change control are agreed. - The quotation, specification and certificate refer to the same version. The catalogue specification is on the pomegranate seed oil product page; the lot tests are on the COA page; the identity evidence is on the identity page. The quality page describes the release file, the EU regulatory note gives the framework references, and analytical methods cover the tests behind the numbers. The evening primrose oil powder page shows how a carrier adds a label line. ### 06 How we prove a lot is pomegranate seed oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/pomegranate-seed-oil/identity/ Reviewed: 2026-11-19 A pomegranate seed oil lot is identified by its fatty acid profile: punicic acid normally makes up 60–80% of the total fatty acids, with linoleic and oleic acid each around 5–10%. The GC peak has to be confirmed as the conjugated C18:3 isomer, not merely counted as an 18:3, and the sterol and tocopherol pattern and the condition figures support the result. A single punicic percentage without the chromatogram is a claim, not an identity. In one linePomegranate seed oil is identified by the punicic acid peak in the GC profile, supported by the sterol and tocopherol pattern and the condition figures. ## Four identity layers A certificate can name the right material and still fail to prove it. The four layers below ask separate questions, and each one needs its own evidence. Four identity layers for pomegranate seed oil | Layer | Question | Evidence | What it proves | Document | Is the material named? | Plant name, plant part, process | Paperwork only | Profile | Is punicic the main C18:3? | GC-FID with a standard and chromatogram | The oil type | Minor components | Is the pattern consistent? | Sterols, tocopherols | Authenticity support | Condition | Is the oil fresh and undiluted? | FFA, PV, p-AV, moisture | Handling, not identity ## The punicic-to-linoleic ratio and the C18:3 isomer The catalogue puts punicic acid at 60–80% and linoleic acid at 5–10%, so the punicic-to-linoleic ratio is roughly 6:1 to 16:1. That ratio is a useful screen. A rosehip oil has linoleic at roughly 45–55% and alpha-linolenic at 20–35%, with no significant punicic acid, so its C18:3-to-linoleic ratio is inverted. Punicic acid and alpha-linolenic acid are isomers: the same carbon count and the same mass, with the double bonds in a different arrangement. A GC method that reports one C18:3 peak without a punicic standard can turn one oil into the other. The ratio is a screen, not a proof; a blend can be built to land inside the punicic range. ## What XRD can and cannot do for an oil X-ray diffraction is a crystallinity method. Pomegranate seed oil is a liquid at room temperature, so it has no crystal lattice to diffract and XRD cannot identify it. The method is useful for the powder-on-carrier grade, where the carrier has a crystalline phase, and for a crystallised fraction such as wax; it is not a release test for the oil. For an oil, the solid-state question is whether the oil has been hydrogenated, fractionated or winterised, and a melting or crystallisation profile answers that better than diffraction. A certificate that says “XRD conforms” for an oil has not said what was tested or what the pattern proves. ## Where substitutions show up Substitution routes and the test that reveals each | Adulterant | What it does | Signal | Test | Sunflower or safflower oil | Dilutes punicic; raises linoleic and oleic | Punicic low; linoleic high; sterol shift | GC, sterols | Soybean or rapeseed oil | Adds linoleic and alpha-linolenic | Alpha-linolenic appears; punicic down | GC with isomer standards | Rosehip oil | Adds alpha-linolenic; no punicic | The C18:3 is alpha-linolenic | GC with standard | Refined pomegranate oil | Lower FFA and lighter colour; profile may shift | FFA low; tocopherols low; colour light | Process record, GC, tocopherols | Added antioxidant | Masks oxidation | PV low but p-AV high; tocopherols high | Label, p-AV, tocopherols | Old or oxidised oil | Raises PV, p-AV and FFA | Condition figures out of line | PV, p-AV, FFA Colour is a weak signal. Pomegranate seed oil is pale yellow to golden; rosehip oil is reddish-orange from carotenoids. A red-orange oil is not pomegranate, but a pale oil can still be a blend. A blend can be tuned to 60% punicic acid; the full profile, the sterol pattern and the tocopherol pattern are harder to tune. ## Writing identity into the specification - “Pomegranate (Punica granatum L.) seed oil, cold-pressed, from the seed.” - “Punicic acid 60.0–80.0% of total fatty acids by GC-FID, confirmed against a punicic acid standard; linoleic 5.0–10.0%; oleic 5.0–10.0%.” - “Identification: the full profile conforms; the chromatogram and the C18:3 isomer identification are reported.” - “Free fatty acid ≤0.50%; peroxide value ≤5.0 meq O₂/kg; moisture ≤0.1%; appearance clear to slightly hazy, pale yellow to golden.” - “Sterol and tocopherol results on request; no added antioxidant unless declared.” - “Heavy metals and microbiology as listed; lot code on pack, COA and retained sample.” A specification that says only “pomegranate seed oil” has not specified the oil. The profile is the testable part, and the isomer is the part that separates it from other C18:3 oils. ## Questions that produce evidence - Can you send the GC chromatogram with the punicic acid standard and the integration? - What are the punicic, linoleic, oleic and total C18:3 figures, and is any of the C18:3 alpha-linolenic acid? - What is the sterol and tocopherol pattern for this lot? - What are FFA, PV, p-AV and moisture, with the test dates? - What is the plant part, origin, press temperature and filtration, and is anything added? - If the lot is disputed, will you joint-retest the retained sample? Six direct answers amount to an identity file; one punicic percentage does not. The catalogue specification is on the pomegranate seed oil product page; the certificate layout is on the COA page; the grade comparison is on the grades page; the rosehip comparison is on the pomegranate versus rosehip page. The analytical methods index covers the GC work, the XRD method note explains the solid-state test, the quality page describes the release file, and the evening primrose oil powder page shows how a carrier changes the identity file. ### 01 What the COA for safflower seed oil actually contains URL: https://nutrition.rainwoodbio.com/products/fatty-acids/safflower-seed-oil/coa/ Reviewed: 2026-11-19 A safflower seed oil certificate reports the appearance, the fatty acid profile by gas chromatography, the free fatty acid value, the peroxide value, the moisture, the heavy-metal panel and the microbiology. Each line should carry its method, its release limit and the measured result for the lot. The profile names the oil and its grade; the free fatty acid and peroxide values describe how far the oil has moved from the fresh, refined state. In one lineA safflower COA is a fatty acid profile, an acidity figure and an oxidation figure on the same lot; a certificate that reports only one of the three does not describe the oil. ## The certificate as a test report A certificate is read line by line, not as a pass stamp. For each parameter the buyer needs the method that produced the number, the release limit the lot was judged against, and the measured result. A row that says only “conforms” asks for trust without evidence. The profile row decides whether the lot is the ordered grade. Safflower is sold as a high-linoleic oil or as a high-oleic oil, and the two have different specifications. A certificate that reports “safflower oil” and a linoleic figure without the oleic, palmitic and stearic results has not shown which grade it is. Typical release lines for refined safflower seed oil | Parameter | Method | Release limit | Appearance | Visual | Clear to slightly hazy, pale yellow oil | Identification | GC of fatty acid methyl esters against reference standards | Full profile matches the declared grade | Linoleic acid (C18:2) | GC, area % of FAME | 70.0–80.0% | Oleic acid (C18:1) | GC, area % of FAME | 10.0–20.0% | Free fatty acid, as oleic acid | Titrimetric (AOCS Ca 5a-40 or ISO 660) | ≤0.50% | Peroxide value | Iodometric titration (AOCS Cd 8b-90 or ISO 3960) | ≤5.0 meq O₂/kg | Moisture | Karl Fischer titration | ≤0.1% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent ## The basis behind each number The fatty acid result is reported on the GC basis. The laboratory converts the oil to methyl esters, separates them on a capillary column and reports each peak as an area percentage of the total FAME. That is not a weight percentage of the oil, because the flame-ionisation response differs between fatty acids. The catalog range is written on the GC basis, and the certificate should say so. A label that needs a weight figure needs the calculation, not a relabelled area percentage. The free fatty acid value is expressed as oleic acid. “0.30%” without that basis is ambiguous, because the same titration would be a different number expressed as lauric or palmitic acid. Safflower is normally quoted as oleic, and the certificate should print the basis beside the value. The peroxide value is an iodometric measure of hydroperoxides, reported in milliequivalents of oxygen per kilogram of oil. It rises as the oil oxidises, but it is not a complete oxidation history: hydroperoxides break down into aldehydes, so a PV can fall again in a badly oxidised oil. The p-anisidine value measures those secondary products. It is not on this catalog specification, but it is the companion test when a lot smells old while the PV is still inside its limit. Moisture is measured by Karl Fischer titration and limited to ≤0.1%. That is tight. A result near the limit points to a wet process or a pack that has taken up water; it raises the risk of hydrolysis, which later shows as a rising free fatty acid value. ## Release limit versus batch result The release limit is the boundary for the lot; the batch result is what the laboratory measured. Both belong on the page, in separate columns, with the method beside them. A result column filled with the specification range is a copy of the gate, not a result. What the result column should contain | Parameter | Release limit | Result column | Linoleic acid | 70.0–80.0% | A measured area %, with the column and the standard named | Free fatty acid | ≤0.50% as oleic | A measured percentage, with the titration basis | Peroxide value | ≤5.0 meq O₂/kg | A measured figure for the lot | Moisture | ≤0.1% | A measured percentage by Karl Fischer | Heavy metals | Per element | A figure in mg/kg for each element, not a total | Microbiology | Counts and absence | The count and the absence statement for the lot “Passes specification” is a conclusion. The reader should reach it from the numbers. For heavy metals the evidence is a figure per element; a single “heavy metals <10 mg/kg” line hides the element and its limit. ## What moves between batches The profile moves with the cultivar, the season and the origin. A lot at 71% linoleic and a lot at 79% are both inside the catalog range and behave differently in a blend. Refining moves the free fatty acid, colour and peroxide value; storage moves the peroxide value and free fatty acid again. Colour is the least quantitative line. Refined safflower is pale yellow; a darker oil can point to a bleaching problem, a hot hold or early oxidation while the assay still passes. Ask for the peroxide and p-anisidine values rather than rejecting on colour. A grade swap is not a batch variation. If the oleic result moves from 15% to 70% and the linoleic result moves the other way, the lot is a different grade, whatever the label says. The lot code on the certificate should match the bottle, the drum and the retained sample. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a grade that the supplier's certificate does not show in full, or a disputed result. The useful panel is not a repeat of every line. It is the full FAME profile with the chromatogram, free fatty acid, peroxide and p-anisidine values, moisture, sterols and ICP-MS for heavy metals. Ask for the detection limit behind each screen; a “not detected” line without a limit describes the method, not the sample. The sample tested should be the retained sample, and the report should identify the lot. When a result is contested, give the referee the retained sample, the certificate and the specification, and ask for tests that separate grade and source rather than a repeat of the linoleic figure. ## What to compare between suppliers Compare seven lines: the grade and full profile; the GC basis; the free fatty acid basis; the peroxide method; moisture; heavy metals and microbiology; the pack, lot code and retest period. Two quotations that agree on linoleic acid but differ on oleic acid or the GC basis are not describing the same oil. The second layer is traceability. The certificate should say who refined the lot, which grade was produced and which pack was filled. The catalog specification sits on the safflower seed oil page. The tests that separate safflower from other oils are on the identity page; the grade fork is on the grades page; the GC method is described in the analytical methods section; the release workflow is on the quality page. ### 02 High-linoleic or high-oleic: choosing a safflower seed oil grade URL: https://nutrition.rainwoodbio.com/products/fatty-acids/safflower-seed-oil/grades/ Reviewed: 2026-11-19 Safflower seed oil is bought by fatty acid profile, and the profile is the grade. The refined high-linoleic grade carries linoleic acid at 70.0–80.0% and oleic acid at 10.0–20.0%; the high-oleic grade reverses those ranges. Both are safflower oil, but they are different specifications, with different oxidative stability, different dose arithmetic and different numbers on the label. In one lineThe grade is the fatty acid profile: high-linoleic and high-oleic safflower oils have different specifications, different oxidative stability and different numbers on the label. ## Why safflower comes in two grades The two grades come from different cultivars of Carthamus tinctorius, not from different refining steps. The traditional type is high in linoleic acid, the 18-carbon fatty acid with two double bonds. Plant breeders produced high-oleic types in which oleic acid, the 18-carbon fatty acid with one double bond, replaces most of the linoleic acid. The seed, the press and the refiner can be the same; the oil is a different specification because the plant makes a different profile. Refining is a second choice, separate from the grade. Crude safflower oil is degummed, neutralised, bleached and deodorised to give the refined oil in the catalog: pale yellow, low in free fatty acid, low in odour and colour. A cold-pressed oil skips some of those steps and keeps more colour and flavour, with a different free fatty acid and oxidation profile. A grade name on its own does not say whether the oil is refined or cold-pressed, so the specification has to say both. This page describes the refined high-linoleic grade we supply. The high-oleic grade is a different specification, and the two should not be substituted without a written change control. ## The two grades side by side High-linoleic and high-oleic safflower seed oil | Property | High-linoleic | High-oleic | Linoleic acid (C18:2) | 70.0–80.0% | About 10–20% | Oleic acid (C18:1) | 10.0–20.0% | About 70–80% | Dominant fatty acid | Linoleic, two double bonds | Oleic, one double bond | Saturated fraction | Low; palmitic and stearic | Low; palmitic and stearic | Oxidative stability | Lower; oxidises readily | Higher; resists oxidation better | Typical use | Softgels, oil blends, a declared linoleic figure | Blends where a longer ambient shelf life matters | Label emphasis | Linoleic acid | Oleic acid The table is a specification comparison, not a ranking. A high-oleic oil is not a better high-linoleic oil; it is a different material. The linoleic figure that a formulator wants for a softgel is not delivered by the high-oleic grade, and the stability that a long ambient shelf needs is not delivered by the high-linoleic grade without help from the pack and the antioxidant. ## What the grade changes in the bottle Both grades are clear, pale yellow liquids at room temperature, insoluble in water and soluble in fats and organic solvents. The difference is not mainly in appearance; it is in behaviour. Linoleic acid has two double bonds and a bis-allylic methylene group between them, a weak point where oxidation starts, and the high-linoleic oil therefore develops hydroperoxides faster than the high-oleic oil under the same store. The high-oleic grade has fewer of those positions and a longer induction period, but it is still an unsaturated oil and it still oxidises. Cold storage can cloud or thicken either oil. That is crystallisation of the more saturated fraction, not a defect, and warming restores the oil without changing the composition. A softgel line should control the fill temperature rather than assume the oil is always clear. Colour is a weak signal of grade: both refined grades are pale yellow, and a darker oil points to processing or oxidation rather than to the fatty acid profile. The pack is part of the grade decision. A high-linoleic oil in a 1 kg HDPE bottle with a small headspace behaves differently from the same oil in a 25 kg drum that is opened repeatedly. If the project needs a long ambient shelf, choose the grade, the antioxidant and the pack together. ## Dose arithmetic and the label The dose arithmetic starts from the oil mass. One gram of high-linoleic oil at 75% linoleic acid delivers about 750 mg of linoleic acid; at the 70% minimum it delivers 700 mg, and at the 80% maximum it delivers 800 mg. One gram of high-oleic oil at 75% oleic acid delivers about 750 mg of oleic acid. Neither figure is a recommended intake; it is the arithmetic that connects the specification to the label. The specification range matters when the label declares a quantity. To declare 750 mg of linoleic acid from an oil with a 70% minimum, the formula needs 750 ÷ 0.70 = 1.07 g of oil. At the top of the range that same 1.07 g delivers about 857 mg, so the label understates the lot. A narrower profile range, agreed with the supplier, reduces that spread; it does not remove it. A softgel fill is sized on the oil mass, and the label declares the oil and, where required, the fatty acid. An oil blend declares each oil. The grade also changes the taste and the mouthfeel: refined high-linoleic oil is bland, while a cold-pressed oil carries seed notes that may not suit a capsule. The dosage form and the grade should be chosen together. ## What to write into the specification - “Refined safflower seed oil, high-linoleic grade, CAS 8001-23-8.” - “Linoleic acid 70.0–80.0% and oleic acid 10.0–20.0% by GC of FAME, area %; report palmitic and stearic as well.” - “Free fatty acid ≤0.50% as oleic acid; peroxide value ≤5.0 meq O₂/kg; moisture ≤0.1%.” - “Identity: the full profile matches the declared grade; no linolenic acid above the agreed limit.” - “Heavy metals and microbiology as listed on the product specification.” - “Pack, storage condition and retest period; grade named on the purchase order and the COA.” The grade name alone is not a specification. “Safflower oil” on a purchase order could be either grade, and a supplier who ships the other one has not breached a term that was never written. Name the grade, the linoleic and oleic ranges and the GC basis in the same document. ## When the other grade is the wrong choice High-oleic is the wrong choice when the label declares linoleic acid at 70% or more, or when the formula is built around the linoleic figure. It is also the wrong choice when the buyer expects the traditional safflower profile and has not agreed a change. The reverse is equally true: high-linoleic is the wrong choice for a long ambient shelf where the pack and the antioxidant cannot carry the oxidation load, and a switch to high-oleic should be a documented formula change, not a silent substitution. Cold-pressed is not a drop-in for refined. It brings colour, flavour and a different free fatty acid and peroxide profile, and a specification written for the refined oil does not transfer. If the project wants a cold-pressed oil, write that specification separately. The product hub carries the catalog ranges; the COA page shows how the profile is reported; the identity page covers the tests that separate the grades; the stability page covers oxidation and the pack; the comparison with flaxseed oil places the grade in a wider choice. ### 02.1 Safflower oil vs flaxseed oil: linoleic and alpha-linolenic URL: https://nutrition.rainwoodbio.com/products/fatty-acids/safflower-seed-oil/grades/safflower-oil-vs-flaxseed-oil/ Reviewed: 2026-11-19 Safflower seed oil and flaxseed oil are both C18 polyunsaturated seed oils, but the dominant fatty acid is different. The high-linoleic safflower grade carries linoleic acid at 70.0–80.0%; flaxseed oil carries alpha-linolenic acid at roughly 45–65%. One is an omega-6 oil and the other an omega-3 oil, and that difference decides the oxidation rate, the dose arithmetic and the label. In one lineBoth are C18 polyunsaturated seed oils, but safflower is the linoleic oil and flaxseed is the alpha-linolenic oil; the dominant fatty acid decides the stability, the dose and the label. ## The two fatty acid profiles Safflower oil is pressed from the seed of Carthamus tinctorius; flaxseed oil, also sold as linseed oil, comes from Linum usitatissimum. Both oils are rich in 18-carbon polyunsaturated fatty acids, which is why they are often grouped together in a sentence. The grouping hides the one-letter difference that matters: linoleic acid (C18:2) has two double bonds, and alpha-linolenic acid (C18:3) has three. The high-linoleic safflower grade is dominated by linoleic acid, with oleic acid as the second fatty acid and only a small saturated fraction. Flaxseed oil reverses the emphasis: alpha-linolenic acid is the main component, linoleic and oleic acids share most of the rest, and the saturated fraction is small. The ranges below are typical for the refined safflower grade and for cold-pressed flaxseed oil; the certificate is the authority for a particular lot. Typical fatty acid profiles, % of total fatty acids | Fatty acid | Safflower, high-linoleic | Flaxseed oil | Palmitic (C16:0) | 5–8% | 4–7% | Stearic (C18:0) | 1–3% | 2–4% | Oleic (C18:1) | 10–20% | 15–25% | Linoleic (C18:2) | 70–80% | 12–20% | Alpha-linolenic (C18:3) | Below 1% | 45–65% The shorthand “two linoleic oils” is misleading if it is read as two oils with the same fatty acid. Only safflower is linoleic-dominant; flaxseed is linolenic-dominant. The two are alternative sources of different fatty acids, not two versions of one ingredient. ## The two oils side by side Safflower seed oil against flaxseed oil | Property | Safflower, high-linoleic | Flaxseed oil | CAS number | 8001-23-8 | 8001-26-1 | Dominant fatty acid | Linoleic, 70–80% | Alpha-linolenic, 45–65% | Second fatty acid | Oleic, 10–20% | Linoleic and oleic | Double bonds in the main chain | Two | Three | Oxidation rate | Fast | Faster | Standard commercial form | Refined oil | Oil or 50% microencapsulated powder | Label name | Safflower oil | Flaxseed oil or linseed oil The table is a specification comparison, not a ranking. Each oil has a profile that the other does not deliver, and a formulator who needs one has not solved the problem by buying the other. The pack and the dosage form follow from the profile: an oil that oxidises faster needs a tighter barrier or a powder format. ## Liquid, flavour and oxidation Both oils are liquids at room temperature and are insoluble in water. Refined safflower oil is pale yellow and bland, which suits a softgel or a neutral oil blend. Flaxseed oil is golden to yellow with a stronger seed flavour and odour, and it is usually cold-pressed and handled under nitrogen; a refined flaxseed oil exists but is less common in supplements. The flavour is a formulation variable, not a defect. The oxidation difference is the main physical difference. Alpha-linolenic acid has three double bonds and two bis-allylic methylene groups, the positions where oxidation starts, so flaxseed oil develops hydroperoxides faster than the high-linoleic safflower oil under the same store. Both oils should be kept dark, cool and closed, but flaxseed oil has less margin. A microencapsulated flaxseed powder protects the oil in a starch matrix, but it does not stop oxidation; the powder's peroxide and p-anisidine values still need a limit and a shelf-life study. Cold storage can cloud either oil, and warming restores it. That is crystallisation of the more saturated fraction, not separation or spoilage. A softgel line should control the fill temperature for both oils rather than assume they behave the same at every temperature. ## Dose arithmetic for oil and powder The dose arithmetic starts from the oil mass and the declared fatty acid. One gram of high-linoleic safflower oil at 75% linoleic acid delivers about 750 mg of linoleic acid; at the 70% minimum it delivers 700 mg, and at the 80% maximum it delivers 800 mg. One gram of flaxseed oil at 55% alpha-linolenic acid delivers about 550 mg; at 45% it delivers 450 mg. The powder changes the basis. A microencapsulated flaxseed powder at 50% oil load and ≥22.5% alpha-linolenic acid delivers about 225 mg of alpha-linolenic acid per gram of powder. To deliver 500 mg, the formula needs 500 ÷ 0.225 = 2.22 g of powder. Comparing 1 g of oil with 1 g of powder is a common error: the powder is half carrier, and the label declares the powder, not the oil. The same arithmetic works in the other direction. To declare 750 mg of linoleic acid from safflower oil with a 70% minimum, the formula needs 750 ÷ 0.70 = 1.07 g of oil. At the top of the range that 1.07 g delivers about 857 mg, so the declared figure is a floor, not a fixed value. A narrower profile range reduces the spread; it does not remove it. None of these figures is a recommended intake. ## What the label has to name “Safflower oil” and “flaxseed oil” are different ingredient names, and “linseed oil” is a synonym for flaxseed oil in some markets, not a third ingredient. A blend that contains both must declare both, and a product made with one cannot declare the other. The fatty acid that the brand wants to highlight belongs in the nutrition or composition statement, in the form the destination allows. The grade is a specification term, not automatically an ingredient name. A “high-oleic safflower oil” claim needs the oleic profile behind it, and a “high-linoleic” claim needs the linoleic profile. For the flaxseed powder, the label declares the powder and its carrier; the oil load and the alpha-linolenic acid content are the numbers that make the powder comparable with the oil. The buyer's regulatory team confirms the ingredient name and the claim for the destination. ## When to choose which Choose safflower oil when the formula needs a linoleic-dominant profile, a bland refined oil, a softgel fill or a neutral base for an oil blend. Choose the high-oleic grade instead when the ambient shelf life matters more than the linoleic figure, and write the grade into the specification. Choose flaxseed oil when the formula needs alpha-linolenic acid and the pack can carry the oxidation load; choose the microencapsulated powder when a stick pack, a powder blend or a beverage cannot take an oil. If the formula needs both fatty acids, declare both oils rather than substituting one for the other. The two have different CAS numbers, different profiles and different oxidation behaviour, and a switch in either direction is a formula change, not a unit conversion. The safflower oil hub carries the refined high-linoleic specification; the flaxseed oil powder page covers the 50% powder; the safflower grades page sets out the high-oleic fork; the methods section explains the GC profile; the quality page describes the release file. ### 03 Safflower seed oil oxidises; the pack and the blend decide the shelf life URL: https://nutrition.rainwoodbio.com/products/fatty-acids/safflower-seed-oil/stability/ Reviewed: 2026-11-19 Safflower seed oil is a polyunsaturated oil, and oxidation is its main failure mode. The catalog limits are free fatty acid ≤0.50%, peroxide value ≤5.0 meq O₂/kg and moisture ≤0.1%; those are release limits, not a storage allowance. The grade, the antioxidant, the headspace, the pack and the temperature decide how long the oil holds its release values. In one lineSafflower oil is unsaturated by design, so stability is a question of oxygen, light, heat and metal contact; the pack and the blend decide how long the release values hold. ## The neat oil: moisture, oxygen and light The bulk oil is anhydrous by specification, but it is not water-free in practice. Moisture is limited to ≤0.1% to protect against hydrolysis: water and heat split triglycerides into free fatty acids and glycerol, and the free fatty acid value rises. An opened bottle or drum takes up water at the surface, and the headspace exchanges at every opening. Keep the container closed, the headspace small, and decant only what the batch needs. Oxygen is the second driver. Linoleic acid at 70–80% has two double bonds and is susceptible to autoxidation. The reaction starts at the surface and at any oil film on the container wall. A full, closed HDPE bottle limits the oxygen; a half-empty drum with a large headspace does not. A nitrogen blanket reduces headspace oxygen, but it is a process choice written into the order, not assumed from the standard pack. Light accelerates oxidation through photo-oxidation, which can proceed by a route that does not need the same initiation as dark autoxidation. HDPE blocks some ultraviolet light but is not opaque; a bottle on a bright shelf is an exposure. For a long storage period, keep the pack in a carton or a dark store, and do not decant the oil into a clear glass bottle for convenience. Heat raises both rates. A cool, dry warehouse is suitable for the sealed pack; a hot loading bay, a car boot or a greenhouse is not. After cold storage, let the sealed pack equilibrate before opening, so condensation does not form on the oil. ## The oil in a blend, an emulsion or a softgel Safflower oil is not water-soluble, so the usual “solution” is an oil blend, an oil-in-water emulsion or a softgel fill. Each format changes the oxidation question. In a blend, the polyunsaturated oil is diluted by a more saturated or more oleic partner, but the blend still oxidises; its peroxide value is a weighted result and does not show which oil contributed. An emulsion is harder: the oil–water interface is where oxygen, metal ions and emulsifier meet, and a fine droplet size gives the reaction more surface. A stable emulsion can oxidise faster than the same oil in bulk, and a change in homogenisation pressure or emulsifier can change the rate. Control the dissolved oxygen, the metal content, the pH and the headspace, and validate the hold time before filling. A softgel protects the oil from air and light, but the shell is not an absolute barrier. Fill temperature, shell formulation and shell oxygen permeability matter, and a softgel stored warm can still develop off-notes. The capsule is a pack, not a guarantee; test the finished softgel, not only the bulk oil. ## What drives degradation Factors that move safflower seed oil during storage | Factor | What it does | Control | Oxygen | Forms hydroperoxides; the peroxide value rises | Low headspace, closed pack, nitrogen where specified | Light | Photo-oxidation; colour and odour change | Opaque or cartoned pack; dark store | Heat | Accelerates oxidation and hydrolysis | Cool store; controlled process temperature | Metals | Iron and copper catalyse oxidation at low levels | Stainless steel contact; avoid brass and copper; chelator in emulsions | Water | Hydrolysis; free fatty acid rises | Moisture ≤0.1%; dry store; sealed pack | Antioxidant | Delays oxidation; it is consumed over time | Mixed tocopherols or rosemary extract; label check These factors act together: a warm, bright, half-empty drum is worse than any one alone, and an emulsion at neutral pH in clear glass combines several. The useful question is not “is safflower oil stable?” but “stable in which pack, in which formula, at which condition, for how long?” ## A stability protocol for the oil A protocol states the pack, the storage condition, the time points and the tests. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% relative humidity cover the warehouse; accelerated storage at 40 °C/75% relative humidity stresses the pack. Add a light-exposure arm and a 60 °C oven test if the project needs a fast ranking of formulations. Test peroxide value, p-anisidine value, free fatty acid, moisture, appearance and odour at each point. The peroxide value measures hydroperoxides; the p-anisidine value measures the aldehydes that follow, and the two do not always move together. A PV that falls while the p-anisidine value rises is a sign of advanced oxidation, not of recovery. The fatty acid profile checks that the oil has not been blended or substituted, and the tocopherol result shows how much antioxidant remains. An oxidative stability index or Rancimat induction period is a useful ranking tool at an elevated temperature. It is not a shelf life. The correlation with a real pack at ambient conditions has to be established for the oil and the pack, not assumed from one number. Report individual results, identify the pack and the lot, and keep the chromatograms. ## The finished formula changes the answer A softgel has a low water activity, but the fill and the shell can still exchange oxygen and moisture. Check the peroxide value at release and after storage, and check the capsule for leakage, tackiness and odour. An oil blend needs a partner that does not shorten the shelf life; a highly unsaturated partner can make the blend worse than either oil alone. An emulsion needs a chelator, an oxygen-controlled process and a pack that blocks light. The antioxidant choice is a label decision too: mixed tocopherols and rosemary extract appear in the ingredient list, and the permitted use and declaration depend on the market. An overage is a label and stability decision, not a substitute for a pack that lets oxygen in. For a powder-on-carrier format, the carrier, oil load and encapsulation efficiency change the exposure. The powder is dispersible, not soluble, and the oil is still unsaturated inside the matrix. Test the powder in the matrix and in the pack, not only the bulk oil. ## How the shelf life is set We do not publish a single shelf-life number, because the pack and the storage condition set it. The assigned retest period belongs on the specification and is supported by stability data for that pack: the 1 kg HDPE bottle and the 25 kg HDPE drum differ in headspace, surface-to-volume ratio and opening history, so the data belongs to the pack. After the retest period, re-assay the retained sample before extending use. Do not extend by assumption, and do not carry a bulk figure across to a repacked container. The product hub lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the methods section describes the analytical tests; the quality page describes the release workflow. ### 04 Safflower seed oil: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/fatty-acids/safflower-seed-oil/moq/ Reviewed: 2026-11-19 The MOQ for refined safflower seed oil is 1 kg, supplied in an HDPE bottle; the standard bulk pack is a 25 kg HDPE drum. Lead time is 1–7 days for the standard pack. A firm quotation needs the grade, the profile specification, the quantity and pack, the destination and Incoterm, the documents and the intended market. In one lineOne kilogram is the smallest order because it is the smallest pack that can be sampled, tested and traced as a lot. ## Why the minimum is 1 kg A 1 kg bottle covers a bench trial, a retained sample and an independent identity test. It is small enough to ship as a parcel, which matters when a formulator needs material before the production plan is fixed, and it is a commercial unit with a lot code rather than a scoop from a drum. The oil in the bottle can be traced back to the refining lot, and the sample kept from it can be compared with the production pack later. Below 1 kg, the oil is usually split from a larger lot and repacked. That adds handling, loses the original pack identity and makes traceability harder, without changing the chemistry. The 25 kg drum is the bulk unit: it reduces handling per kilogram, but it commits inventory and a longer storage period once opened. The MOQ is a pack decision, not a volume target. ## Packs and formats Standard safflower seed oil packs | Pack | Net weight | Typical use | Notes | HDPE bottle | 1 kg | Trial, sample, small batch | Keep closed; small headspace; store dark and cool | HDPE drum | 25 kg | Production | Lot code on drum and label; close after each dispense | Powder on carrier | On request | Sticks and powder blends | Carrier and oil load change the specification The catalog form is the refined oil. A powder on a carrier is a different specification, not a packing choice: the carrier, the oil load and the particle size all move, and the label changes with them. If the dosage form needs a powder, say so before the quotation, because the change may move the lead time as well as the pack specification. The bottle and the drum are the standard packs; other sizes are a separate discussion, not a catalogue line. ## Lead time and dispatch The standard pack is quoted at 1–7 days from order confirmation. That window covers picking, document preparation and dispatch; it does not include the shipping transit, customs clearance or the customer's own quality release. A powder-on-carrier format or a non-standard pack adds time, and the quotation should state it separately. Ask for the dispatch date, not only the lead time. A 25 kg drum may travel on a pallet and a 1 kg bottle may travel as a parcel; the Incoterm decides who books the freight and who clears the entry. The documents should travel with the lot, not after it, so that the importer can release the material without waiting for a second envelope. ## What a quotation needs Six items make a quotation firm enough to compare: - Product and grade. Refined safflower seed oil, high-linoleic grade, CAS 8001-23-8. - Specification. Linoleic and oleic ranges, GC basis, free fatty acid, peroxide value, moisture, heavy metals and microbiology. - Quantity and pack. 1 kg bottle, 25 kg drum, or a powder-on-carrier variant. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, specification, TDS, SDS and any market-specific statement the importer needs. - Intended use and market. Supplement, food or another use, and the market where the finished product will be sold. A quotation without the grade and the market is incomplete. The same oil can suit one destination and sit outside the file for another, and the paperwork is part of the offer. Commercial terms are stated on the quotation; this page describes the pack and the inputs, not the commercial figure. ## The sample is a lot, not a demonstration The 1 kg bottle is the qualification sample. Test the fatty acid profile, free fatty acid, peroxide value, moisture and microbiology before scaling, and keep a retained sample from the same bottle. The lot code on the sample, the COA and the quotation should match. A sample that cannot be traced to a lot is a demonstration, not a qualification. If the project needs a smaller quantity for a bench trial, discuss it before ordering. A split from a bulk lot is a repack with its own traceability, not the catalog pack, and it should be documented as such. Do not assume that a bench sample and the production drum will come from the same lot; if the lot identity matters, say so on the order. ## Terms to settle before the first order The quotation pairs the commercial terms — Incoterm, 1 kg HDPE bottle or 25 kg drum, lead time and documents — with the quality terms: the high-linoleic profile revision, a lot certificate, a reserve sample kept from each lot, the retest window and how a profile or process change is approved. Put both in the same offer and sign a quality agreement before the first production order; for an oil with a peroxide limit, the storage and release terms belong together. Returns and replacements follow the quotation and the quality agreement. A lot that fails the agreed specification should be handled through the retained sample and a joint re-test, not through a photograph of the oil. Ask who pays for the referee test and which laboratory is acceptable to both sides; those two answers prevent most arguments later. The product hub carries the catalog specification; the COA page lists the release tests; the compliance page covers the market file; the MOQ glossary entry defines the term; the logistics page covers shipping and documents. ### 05 The regulatory file for safflower seed oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/safflower-seed-oil/compliance/ Reviewed: 2026-11-19 Safflower seed oil is a conventional vegetable oil with a long food use, but that history does not by itself decide the route for a finished product. The destination market, the use as a food or a food supplement, and the label determine which framework applies, and the buyer's regulatory team confirms that route. This page sets out the frameworks, the document pack and the checks that belong in the file. In one lineThe specification describes the oil; the regulatory file shows the route, the contaminant limits and the label for the destination. ## What the file has to establish Two questions come before any document. First, is the oil going into a conventional food or a food supplement? The route changes the contaminant limits, the labelling and the claim rules. Second, which oil is being placed on the market: the grade, the refining process and the pack are part of the identity, and a file for one grade does not automatically cover the other. The framework is a set of instruments, not a single approval: general food law sets safety and traceability, the contaminants regulation sets maximum levels, the labelling regulation sets pack information, the supplements directive and national rules set the supplement route, and the novel-food and claims regulations set the route and the wording. Pesticide residues and extraction solvents have their own instruments; the current consolidated text is the reference. A history of food use is evidence, not a determination; the buyer's regulatory team confirms it for the specific oil, process and use level and keeps that confirmation with the order. ## European Union The EU file starts with the route. For a conventional food, the General Food Law (EC) No 178/2002, the hygiene rules and the contaminants regulation apply. For a supplement, Directive 2002/46/EC and the member state's national rules add the supplement conditions, including any maximum daily level. The buyer's team identifies the member state and route before the label is drafted. Safflower oil has a long food history, but the novel-food status of the specific grade and process is checked against Regulation (EU) 2015/2283 rather than assumed. This matters most for a high-oleic line, whose history and process may differ. The file should carry the confirmation, not a statement that the oil “is authorised”. Refined oils also sit within the process-contaminant rules: 3-MCPD and glycidyl esters are monitored in refined vegetable oils, and Regulation (EU) 2023/915 decides the limit and the scope. Labelling follows Regulation (EU) No 1169/2011: the ingredient is declared by its legal name, and a blend declares each oil. Pesticide residues fall under Regulation (EC) No 396/2005 and extraction solvents under Directive 2009/32/EC where a solvent process is used; check the current text before the first shipment. ## United States In the United States, the file depends on whether the oil is a conventional food ingredient or a dietary ingredient. For a conventional food, the Federal Food, Drug, and Cosmetic Act applies, including the food-additive and GRAS routes. For a dietary supplement, DSHEA applies, and a new dietary ingredient needs a notification under 21 U.S.C. 350b unless it has been marketed in the food supply in a qualifying form. The supplier states the identity and specification; the buyer's team confirms the basis and keeps the evidence. Labelling follows 21 CFR 101. A supplement declares the oil in the Supplement Facts panel, and a conventional food declares it in the ingredient list. A structure/function claim needs substantiation and, for a supplement, the notification that goes with it; a disease claim is outside the framework. The label, the claim and the certificate are reviewed separately; the certificate does not approve a claim. ## Contaminants and the finished-product calculation The contaminant panel is a finished-product question, not a drum result. The oil is diluted by the dose, and the supplement limit applies to what is swallowed; an oil limit can be stricter, so the buyer needs the current text and the calculation. The table separates the product specification from the regulatory check. Contaminant checks for a safflower oil file | Parameter | Product specification | What the file should show | Lead (Pb) | ≤3 mg/kg | Lot result, method, and the destination limit applied to the finished product | Cadmium (Cd) | ≤1 mg/kg | Lot result and any category exception that applies | Mercury (Hg) | ≤0.1 mg/kg | Lot result and method | Arsenic (As) | ≤2 mg/kg | Lot result and the agreed limit | 3-MCPD and glycidyl esters | Check current text | Result if the refined oil is in scope, with the method | Pesticide residues | Check current text | Result or a documented screen, with the detection limits The product specification and the regulatory limit are different columns. A lot that meets the specification can still exceed a destination limit at a large dose, and a lot that meets the destination limit may not meet a customer's tighter specification. Do not merge the two into one “compliant” statement. ## Claims and the label No therapeutic, disease, curative or preventative claim belongs on a safflower oil page or a finished-product label. The fatty acid figure is composition, not a claim. What may be said about linoleic acid depends on the market, the product and the dose. In the EU, the authorised claim for linoleic acid is tied to a daily intake of 10 g under Regulation (EU) No 432/2012 as amended. The claim belongs to the finished product, not the oil, and the reviewer confirms the condition and the current wording. A nutrition claim about fat content follows Regulation (EC) No 1924/2006. In the United States, a structure/function claim needs substantiation and the appropriate notification; a disease claim is outside the framework. The label names the oil as sold. The grade is a specification term, not automatically an ingredient name, and “high-oleic” or “high-linoleic” needs the profile behind it. The reviewer confirms the name, the claim and the market together. ## The document pack A complete file carries the lot COA, the specification with its version, the TDS, the SDS, the origin, allergen, GMO and residual-solvent statements, the contaminant and pesticide results, the process flow, the food-safety certification and any halal or kosher certificate the market needs. Each document should carry a date and version, and the COA should identify the shipped lot. Where a statement is missing for the lot, name the gap before the order, not at the port. A document list with versions is more useful than a folder of undated PDFs, and it should say which documents travel with each shipment. ## Checklist before the first order - The route is named: conventional food or food supplement, with the destination market. - The grade, the specification version and the CAS number are on the file. - The novel-food or dietary-ingredient basis is confirmed by the buyer's regulatory team. - The contaminant results are converted to the finished-product dose and checked against the current text. - The label and the claim have been reviewed for the destination. - Source, process and pack are under change control, and the document list is complete. The product hub carries the catalog specification; the COA page explains the lot certificate; the identity page covers the analytical evidence; the quality page describes the release file; the methods section gives the analytical background. ### 06 How to prove a safflower seed oil lot is safflower oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/safflower-seed-oil/identity/ Reviewed: 2026-11-19 A safflower lot is identified by the whole fatty acid profile, not by a single linoleic figure. The profile by GC shows the grade, the linoleic-to-oleic ratio separates the two commercial types, and the sterol and tocopherol pattern adds a source check. A certificate that reports only linoleic acid has not shown identity. In one lineIdentity is the whole fatty acid profile: the linoleic-to-oleic ratio names the grade, and the minor components separate safflower from the oils that can mimic its main peak. ## The four identity layers A certificate can name the right oil and still fail to prove it. The layers below are separate questions, and each needs its own evidence. A supplier who answers only the first has described the paperwork, not the oil. Four layers of safflower seed oil identity | Layer | Question | Test | What it proves | Document | Is the grade and CAS named? | Name, CAS 8001-23-8, specification | Paperwork only | Profile | Is the fatty acid pattern safflower? | GC of FAME, full profile | The oil type and the grade | Ratio | High-linoleic or high-oleic? | C18:2 ÷ C18:1 from the same run | The grade, not the source | Minor components | Is the source consistent? | Sterols and tocopherols | A source check, not a purity assay ## The linoleic-to-oleic ratio The ratio is the linoleic result divided by the oleic result, both taken from the same GC run. For the high-linoleic grade the catalog ranges give a ratio of about 3.5 to 8: 70 ÷ 20 at the low end, 80 ÷ 10 at the high end. For the high-oleic grade the ratio is about 0.13 to 0.29. The two windows do not overlap, so a ratio near 1 is neither catalog grade and needs an explanation before the lot is accepted. The ratio is useful because it is derived, not measured: no extra test, no extra sample, and no chance that the two figures came from different lots. It catches a grade swap immediately. A high-oleic lot sold as high-linoleic shows an oleic figure near 70% and a ratio below 0.3, whatever the label says. It does not, on its own, prove the source. Sunflower oil is also linoleic-dominant, and its linoleic and oleic ranges can produce a ratio inside the safflower window. The ratio names the grade; the full profile and the minor components do the source check. A certificate that reports only the ratio, and not the palmitic, stearic and linolenic results, has compressed two questions into one number. ## X-ray diffraction and why it does not answer this question X-ray diffraction is a solid-state method. It reads the spacing of a crystal lattice, and a refined oil at room temperature is a liquid with no such lattice. A diffraction scan of the oil therefore does not give the kind of pattern that identifies a crystalline material, and a certificate line that says “XRD conforms” for a liquid oil adds very little. Chilling the oil can crystallise part of the triglyceride mixture, but the pattern then depends on the cooling rate, the polymorph and the fraction that crystallised. That is a study of crystallisation, not a routine identity test. If a supplier offers XRD as evidence for safflower oil, ask which reference pattern was used and what the method was intended to prove. The methods that do answer the question are the GC profile, the sterol and tocopherol pattern, and, for a hydrocarbon adulterant, FTIR or GC-MS. XRD belongs to solid ingredients; it is not the tool for a liquid oil. ## What adulteration looks like Common safflower oil substitutions and the signals | Adulterant | Why it fits | Signal | Test | Sunflower oil | Linoleic-dominant, similar main peak | Sterol pattern; palmitic and stearic shift | GC profile plus sterols | Soybean oil | High linoleic, widely available | Linolenic acid at 5–9%; sterols | GC profile | Canola oil | High oleic, similar to the high-oleic grade | Linolenic acid; brassicasterol | GC profile plus sterols | Flaxseed oil | Seed oil with a similar colour | Alpha-linolenic acid at 45–65% | GC profile | High-oleic safflower as high-linoleic | Same species, different grade | Linoleic-to-oleic ratio below 0.3 | GC profile | Mineral oil | Colourless diluent | No fatty acid peak; hydrocarbon bands | FTIR, GC-MS The first row is the hard one. Sunflower oil can sit inside the safflower linoleic range, so the linoleic figure alone will not separate them. The sterol pattern and the minor fatty acids carry the distinction, and a laboratory that reports only the main peak has not looked for it. The last row is a different kind of adulteration: a mineral diluent has no fatty acid profile at all, so a full FAME run shows the dilution as a mass-balance gap. ## How to write identity into the specification - “Refined safflower seed oil, high-linoleic grade, CAS 8001-23-8.” - “Full FAME profile by GC: report C16:0, C18:0, C18:1 and C18:2; linoleic 70.0–80.0% and oleic 10.0–20.0%, area %.” - “Report any C18:3 peak; the agreed limit for the grade applies.” - “Identity: retention match against reference FAME, with the chromatogram available on request.” - “Sterol and tocopherol pattern on request, for a source check.” - “Free fatty acid, peroxide value and moisture as listed; grade named on the purchase order and the COA.” The specification should ask for the full profile, not only the linoleic figure. That one change makes the grade swap visible and gives the laboratory the data it needs for a source check. It also makes two suppliers comparable, because the same four or five peaks are reported in the same way. ## Five questions for the supplier - Which grade is this lot, and what are the linoleic and oleic results? - Can you send the full FAME chromatogram with all peaks, not only the linoleic figure? - Which GC method and reference standards were used? - What are the sterol and tocopherol results, and do they match the declared source? - If the lot is disputed, will you accept a joint re-test on the retained sample? Five direct answers amount to an identity file. A single linoleic percentage does not. The product hub carries the catalog specification; the COA page shows where each figure sits on the certificate; the grades page compares the two profiles; the methods section explains the GC test; the quality page describes the release file. ### 01 What the COA for squalene actually contains URL: https://nutrition.rainwoodbio.com/products/fatty-acids/squalene/coa/ Reviewed: 2026-11-19 The certificate for a squalene lot reports appearance, identification by GC retention, assay by GC, refractive index, iodine value, moisture, the heavy-metal panel and microbiology. Each line needs three things: the method, the release limit and the measured result. The limits on this page are the catalog specification; the certificate is the record for one pack. In one lineThree figures carry a squalene certificate: the GC assay, the refractive index and the iodine value, each with a method and a measured result beside its release limit. ## The certificate as a test report A certificate is auditable when every line can be read without a second document. The parameter says what was measured, the method says how, the limit says what the lot was released against, and the result says what the laboratory found. A row that reports only “conforms” gives a conclusion without the evidence. The identity block is the one that separates squalene from squalane and from a diluted oil. The assay block says how much squalene is present. They need different lines on the page. Identity, assay and purity · squalene oil | Parameter | Method | Release limit | Appearance | Visual | Colourless to pale yellow, clear oil | Identification | GC retention and refractive index | Conforms to the reference | Assay (GC) | GC assay | ≥90.0% | Refractive index (20 °C) | Refractometry | 1.494–1.499 | Iodine value | Wijs titration | 350–380 g I₂/100 g | Moisture | Karl Fischer | ≤0.1% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent ## What the assay, the refractive index and the iodine value each measure The GC assay reports the squalene peak as a percentage of the oil, usually against an internal standard. Area normalisation without a standard assumes that every component has the same response, which is rarely true for a hydrocarbon mixture. Ask for the standard, the column and the integration basis. The catalog does not name the assay basis, so the certificate should state it. At ≤0.1% moisture the as-is and dry figures are close, but the row still needs the basis. The ≥90.0% gate also leaves up to 10% of the oil unaccounted for by the named peak, so the certificate should say what the balance contains rather than label all of it as impurity. The refractive index is a fast physical check. It is measured at 20 °C, and the temperature belongs in the result because the value moves with it. A refractive index inside 1.494–1.499 is consistent with squalene but not specific to it; the number supports the identity, it does not prove it alone. The iodine value is the unsaturation figure. It reports how many grams of iodine react with 100 g of oil, and each double bond reacts with one iodine equivalent. Squalene has six double bonds and a theoretical iodine value near 370.7; the catalog window is 350–380, which is about 94–102% of that figure. A saturated hydrocarbon contributes almost nothing, so the iodine value is also the first check against a squalane cut. What each release figure measures | Figure | What it measures | Why it matters | Assay (GC) | Squalene peak against a standard | How much of the oil is the named hydrocarbon | Refractive index | Optical property at 20 °C | A quick consistency check on identity | Iodine value | Iodine absorbed per 100 g | The number of double bonds in the oil | Moisture | Water by Karl Fischer | The assay basis and the hydrolysis risk ## Release limit versus batch result The release limit is the boundary for the lot. The batch result is what the laboratory measured on that lot. Both belong on the page, in separate columns, with the method beside them. A result column filled with the specification range is not a result; it is a copy of the gate. What the result column should contain | Parameter | Release limit | Result column | Assay | ≥90.0% by GC | A measured percentage, with the standard and the integration basis | Refractive index | 1.494–1.499 at 20 °C | The measured value and the temperature | Iodine value | 350–380 g I₂/100 g | The measured value and the method | Moisture | ≤0.1% | The measured percentage | Heavy metals | Per element | A figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot “Passes specification” is a conclusion, and the reader should be able to reach it from the numbers. For heavy metals the evidence is a figure per element, not a single total; for microbiology it is a count plus an absence statement. ## What moves between batches The olive source, the crop year and the deodoriser-distillate batch move the colour, the assay and the unsaturation. The refining and deodorisation steps can shift it; storage before packing can move the peroxide value, which is not a catalog line but is the first oxidation signal. Two lots can both meet the same window and still differ in iodine value by twenty units. Colour is the least quantitative line. Colourless to pale yellow covers a wide range, and a shift within it is not an identity failure. A batch that is noticeably darker can point to a longer hold or an oxidation product while the assay still passes; ask for the peroxide value and the batch record. A trend across lots says more than one result near an edge: assay drifting low, iodine value falling, moisture climbing. The lot code on the certificate should match the bottle, the drum and the retained sample. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a source claim the certificate does not prove, or a disputed result. The useful panel is GC with a squalene standard, GC-MS for unknown peaks, refractive index, iodine value, moisture, heavy metals and microbiology. Add peroxide value, acid value and saponification value when oxidation or a vegetable-oil dilution is suspected. The saponification value is close to zero for a hydrocarbon oil and rises when a triglyceride oil is present. Ask the laboratory to report its detection limit; a “not detected” line without a limit is evidence about the method, not about the sample. Chain of custody matters: the sample tested should be the sample retained, and a contested result should go to a joint re-test on that sample rather than a repeat of the same assay. ## What to compare between suppliers Put six lines side by side: source and CAS number, assay result and basis, refractive index with temperature, iodine value with method, moisture and contaminants, and pack size with lot code. Two quotations that agree on assay but differ on iodine value are not describing the same oil. The second layer is traceability. The certificate should say who manufactured the lot, the source, the distillation step and the pack. The catalog specification sits on the squalene product page. The tests that separate squalene from squalane are on the identity page; the market conditions are on the compliance page; the analytical methods are introduced in the methods section; the release workflow is on the quality page. ### 02 Squalene grades: source, purity and the powder format URL: https://nutrition.rainwoodbio.com/products/fatty-acids/squalene/grades/ Reviewed: 2026-11-19 Squalene is sold by source, assay and format, not as one commodity grade. The catalog material is olive-derived, ≥90% by GC, supplied as an oil in a 1 kg amber bottle or a 25 kg HDPE drum. A higher assay, a different source or a powder-on-carrier format is a different specification. Squalane is a different material, not a grade of squalene. In one lineThe grade of squalene is the source plus the assay plus the format; the catalog grade is olive-derived at ≥90% by GC, and any step away from it is a new specification. ## Why squalene has grades at all Squalene is a hydrocarbon that occurs in small amounts in olive oil and in a few seed oils, and it is concentrated from the deodoriser distillate of olive-oil refining. The source decides which minor hydrocarbons, sterols and oxidation products travel with it, and it decides the traceability story the buyer has to keep. Olive-derived material and material recovered from shark liver oil are chemically the same molecule, but they are not the same purchase. The assay is the second axis. The catalog gate is ≥90.0% by GC, which leaves room for other hydrocarbons in the oil. A tighter assay is a different specification with a different refining history, and it should be quoted as such rather than assumed from the catalog number. The third axis is the format: an oil for a softgel or an oil blend, or a powder on a carrier for a stick pack. Squalane sits outside this scheme because hydrogenation changes the molecule. None of these axes is a marketing label. Each one moves a line on the specification, a test on the certificate or a step in the process, and the buyer should be able to name which one is being bought. ## The grades side by side Squalene grades and the neighbouring material | Grade | Identity | Assay | What changes | Olive-derived oil (catalog) | Squalene, CAS 111-02-4, olive source | ≥90.0% by GC | The standard specification and the two standard packs | Higher-purity olive oil (market grade) | The same molecule, tighter assay | Above the catalog gate; a separate specification | Refining history, colour, odour and the specification lines | Powder on carrier | Squalene on a declared carrier | Expressed on the oil | Oil load, flow, dose arithmetic and pack | Squalane | C₃₀H₆₂, CAS 111-01-3 | Hydrogenated; iodine value near zero | Saturation, stability and the label name The table shows why the four are separate purchases. The powder is not a diluted grade of the oil in the commercial sense; it is an oil carried on a matrix, and the oil load has to be declared. Squalane is not a purer squalene; it is the saturated form with its own CAS number and its own market. ## Oil, powder and the handling difference Squalene is a clear, colourless to pale yellow oil. It is lighter than water, insoluble in water and miscible with many vegetable oils and non-polar solvents. The refractive index sits in a narrow window at 1.494–1.499, and the oil stays liquid at ordinary storage temperatures. Those properties make it easy to blend into an oil phase and awkward to disperse in a water-based drink without an emulsifier. The powder-on-carrier format is a free-flowing solid in which the oil is held on a declared carrier. It disperses in water rather than dissolving, and it brings the carrier into the formula. The oil load is the number that matters: a powder declared at 50% oil delivers half its mass as oil, so the dose arithmetic is not the same as for the neat oil. Both formats need protection from light, heat and air. The amber bottle and the HDPE drum are barriers, not decorations; an open container on a bench is an oxidation experiment. The powder adds surface area and a carrier that can hold moisture, so its storage and its peroxide value need their own attention. ## Dose arithmetic across the formats The dose is set by the formulator and the label, not by this page. The arithmetic is simple and easy to get wrong. One gram of a 90% oil delivers about 0.9 g of squalene; one gram of that powder delivers about 0.5 g of squalene and 0.5 g of carrier. A softgel fill weight is the oil mass plus the shell; an oil blend declares the oil as a percentage of the blend. If the label names squalene, the amount on the label should be the squalene mass, not the mass of the oil or the powder. The assay and the oil load are the two conversion factors. An overage for storage loss is a separate decision, and it belongs with the stability data rather than with the grade choice. The grade also decides the dosage form. An oil suits a softgel or an oil blend. A powder suits a stick pack, a capsule fill or a drink mix. A formulator who swaps one for the other has changed the fill weight, the mouthfeel and the label, even when the assay is unchanged. ## What to write into the specification - “Squalene, olive-derived, CAS 111-02-4, C₃₀H₅₀.” - “Assay ≥90.0% by GC; report the standard and the integration basis.” - “Refractive index 1.494–1.499 at 20 °C; iodine value 350–380 g I₂/100 g.” - “Moisture ≤0.1%; heavy metals and microbiology as listed.” - “Source and distillation step declared; no squalane substitution.” - “Pack: 1 kg amber bottle or 25 kg HDPE drum; storage condition stated.” - “Powder on carrier: carrier and oil load declared; assay expressed on the oil.” ## When another grade or another material is the right choice If the formula needs a saturated, oxidation-resistant oil, squalane is the material, not a higher grade of squalene. If the label names squalane, a squalene lot is not a drop-in, because the ingredient name, the CAS number and the unsaturation all change. If the formula is a clear aqueous drink, the neat oil will separate; an emulsion or a powder-on-carrier format is the practical route. If the application needs a tighter assay than the catalog gate, ask for it as a separate specification with its own certificate. A catalog grade cannot be tightened by a note on the purchase order. The product hub carries the catalog data; the level-four comparison sets out the saturated form; the COA page shows how each grade is reported; the MCT powder page is a useful reference for carrier-based formats; the quality page describes change control. ### 02.1 Squalene vs squalane: the unsaturated and the saturated form URL: https://nutrition.rainwoodbio.com/products/fatty-acids/squalene/grades/squalene-vs-squalane/ Reviewed: 2026-11-19 Squalene is C₃₀H₅₀ with six double bonds; squalane is C₃₀H₆₂, the same carbon skeleton fully hydrogenated. The two are close in mass — 410.72 against 422.81 g/mol — but they behave differently in air, on a gas chromatograph and on a label. Squalane is not a purer squalene; it is a different substance. In one lineSix double bonds and about twelve mass units separate squalene from squalane; that difference decides the stability, the analytical method and the name on the label. ## One skeleton, six double bonds Both materials are built on the same thirty-carbon triterpene skeleton. Squalene carries six carbon-carbon double bonds; squalane has none. Hydrogenation adds one molecule of hydrogen across each double bond, so six moles of hydrogen per mole of squalene convert it to squalane. The carbon chain does not change; the unsaturation does. The mass change is small. Six hydrogen molecules add about 12.1 mass units to a squalene molecule of 410.72, a gain of about 2.9%. That is why the two are so close in density and why appearance cannot tell them apart. Both are colourless to pale yellow oils at room temperature, and both are insoluble in water and miscible with many oils. “Fully saturated” is the whole distinction. It is not a purity grade, a filtration step or a dilution. A squalane certificate that also reports squalene is describing a residue or an incomplete reaction, not a blend of two grades. ## The numbers side by side Squalene and squalane compared | Property | Squalene | Squalane | CAS number | 111-02-4 | 111-01-3 | Formula | C₃₀H₅₀ | C₃₀H₆₂ | Molecular weight | 410.72 | 422.81 | Double bonds | Six | None | Iodine value | 350–380 g I₂/100 g | Near zero | Refractive index (20 °C) | 1.494–1.499 | About 1.450–1.452 | Density | About 0.858 g/mL | About 0.810 g/mL | Typical use | Food, supplement and personal-care oil | Personal-care oil The iodine value is the widest gap in the table: six double bonds give squalene a figure near 371, while a fully saturated oil gives almost nothing. The refractive index and the density follow the same direction. A laboratory can separate the two with a few grams of sample and two measurements, long before a chromatogram is run. ## How the two are told apart Both are hydrocarbons with no useful ultraviolet chromophore, so HPLC with UV detection is not the method of choice. GC with a flame-ionisation detector is the practical method. The method should name the column, the temperature programme and the reference standards for both materials, because the two peaks are close and a retention time without a standard proves little. The iodine value is the decisive release figure. A squalene lot at 350–380 cannot be a squalane lot, and a squalane lot with an iodine value near zero cannot be squalene. The refractive index supports the result: 1.494–1.499 against about 1.450–1.452 is a gap far wider than the method's repeatability. Density is a useful third check but is not a release line. If both materials are present, the GC profile and the iodine value together give the approximate split. A partially hydrogenated oil sits between the two, and its iodine value is the quickest way to see it. Appearance and colour are no help at all. ## Stability is the practical difference Squalene oxidises. Its six double bonds are sites for autoxidation, and the oil takes up oxygen during storage to form hydroperoxides, which then break down into aldehydes and other volatile products. The visible signs are a darker colour, a heavier odour and a rising peroxide value. The rate depends on light, heat, headspace oxygen and metal contact, not on the calendar alone. Squalane is saturated and therefore much less reactive towards oxygen. That is why the saturated form became the usual personal-care oil: it does not develop the same oxidation products on the shelf. It is not indestructible — strong heat and light still change any oil — but its failure mode is not the rapid autoxidation that governs squalene. The formulation consequence is direct. A squalene product needs an antioxidant, a low-oxygen pack and a dark container; a squalane product needs a clean pack and a sensible temperature, but not the same oxidation controls. The stability page sets out the protocol for the unsaturated material. ## The label and the regulatory file “Squalene” and “squalane” are different ingredient names. A product made with squalane does not declare squalene, and a product made with squalene does not declare squalane. The CAS number, the formula and the unsaturation all change, so a 1:1 substitution is not a labelling formality: it changes the molar amount as well as the name. The use decides the framework. Squalene is sold as a food or supplement oil in some markets; squalane is used mainly in personal care, where the cosmetic rules apply. The buyer's regulatory team confirms the route for the destination, the finished product and the intended use. A cosmetic-grade squalane certificate does not establish a food use, and a food-grade squalene certificate does not make the material a cosmetic ingredient. Source adds a second label question. Olive-derived squalene and squalane made from it can carry a source statement; the wording and the substantiation belong to the destination rules and the supplier's records. The certificate alone does not prove the botanical origin. ## When to choose which Choose squalene when the specification calls for the unsaturated material: a food or supplement oil, an oil blend, or a formula where the six double bonds are part of the identity. Choose squalane when the formula needs a saturated, oxidation-resistant oil and the label names squalane. Neither is a higher grade of the other. If a project is switching from one to the other, the switch is a new material: new specification, new certificate, new stability work and a label check. The mass factor is small, but the analytical figures, the oxidation behaviour and the regulatory file are not. The squalene hub carries the unsaturated specification; the grades page places this comparison in the wider range; the identity page gives the tests; the stability page covers oxidation; the methods section explains the analytical approach. ### 03 Squalene stability: oxidation is the failure mode URL: https://nutrition.rainwoodbio.com/products/fatty-acids/squalene/stability/ Reviewed: 2026-11-19 Squalene fails by oxidation. The oil takes up oxygen at its six double bonds, forms hydroperoxides, and then darkens and develops an odour as those hydroperoxides break down. Moisture is a release limit at ≤0.1%, but it is not the main storage risk. Light, heat, headspace oxygen and metal contact are the variables that decide how long a lot keeps. In one lineSqualene fails by oxidation, not by moisture: peroxide value, colour and odour move first, and the pack, the headspace and the antioxidant decide how fast. ## The oil in the sealed pack The catalog moisture limit is ≤0.1%, measured by Karl Fischer. That is a release gate, not a storage allowance. Squalene is hydrophobic and does not dissolve in water, but water can be entrained during processing or condense into a partly used container. A rising moisture result is a handling signal more often than a chemistry signal. The real change in the drum is oxidation. Squalene is a hydrocarbon with six double bonds and several allylic methylene groups; oxygen attacks those sites in a chain reaction. The first products are hydroperoxides, which are not volatile and are not visible. As they decompose, aldehydes and ketones appear, the colour moves from pale yellow towards a darker tone, and the odour becomes heavier. By the time the odour is obvious, the peroxide value has usually been rising for some time. The pack is the first control. The 1 kg amber bottle and the 25 kg HDPE drum both limit light and air, but neither is absolute. Keep the container closed, keep the headspace small, and keep the store cool. A modified atmosphere is not implied by the standard pack; if one is needed, it belongs in the specification. ## When the oil is blended or emulsified Squalene is insoluble in water, so an aqueous drink or a lotion carries it as an emulsion. The oil sits in the dispersed phase, and the interface between oil and water is where oxygen, metal ions and heat do their work. A stable emulsion can still oxidise faster than the neat oil because the surface area is larger and the aqueous phase can carry metal catalysts. In an oil blend the material is miscible with other triglycerides and esters. That dilutes the squalene but does not stop the reaction; the blend's own unsaturation adds to the oxygen demand. The antioxidant has to be chosen for the whole oil phase, not only for the squalene fraction, and its level has to be justified in the stability work. A hot-fill or pasteurisation step adds a heat load that the bulk oil never sees. A softgel avoids the water, but the shell and the plasticiser can transfer moisture and oxygen over time. The bulk stability result is the starting point; the finished format needs its own data. ## What drives degradation Factors that move squalene during storage | Factor | What it does | Control | Oxygen | Forms hydroperoxides; peroxide value rises | Low headspace; sealed pack; minimal opening | Light | Accelerates oxidation; colour and odour change | Amber bottle; opaque drum; dark store | Heat | Raises the oxidation rate | Cool store; cool process; no hot hold | Metal ions | Catalyse hydroperoxide breakdown | Stainless steel contact; avoid iron and copper | Moisture | Haze and hydrolysis in a blend | ≤0.1%; dry store; closed container | Antioxidant | Slows initiation and propagation | Tocopherol or rosemary extract, if the specification allows These factors are not independent. A warm, bright store with a half-empty bottle combines heat, light and a large oxygen headspace. The useful stability question is not “is squalene stable?” but “stable in which pack, at which condition, for how long?” ## A stability protocol for the ingredient A useful protocol states the pack, the storage condition, the time points and the tests. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% relative humidity cover the warehouse; accelerated storage at 40 °C/75% relative humidity stresses the pack. A light-exposure arm covers the failure mode that a dark incubator misses. Test assay, refractive index, iodine value, peroxide value, acid value, colour, moisture and microbiology at each point. Peroxide value alone can mislead, because hydroperoxides decompose and the number falls again while the oil is still deteriorating. Pair it with p-anisidine or a TOTOX calculation so that the secondary products are counted. Report the individual results, not only a pass statement, and identify the pack and the lot family. Ask for the stability summary for the pack you will buy, not for a different pack from the same product family. A 25 kg drum and a 1 kg bottle have different headspace and different opening histories; the data belongs to the pack. ## The finished formula changes the answer A softgel fill has low water activity, but the shell can transfer moisture and oxygen. Check the fill's peroxide value at release and after storage, and check the shell for brittleness or leakage. An oil blend needs a compatible antioxidant and a check that the other oils do not accelerate the reaction. An emulsion needs the oil-phase antioxidant, a metal-sequestering agent where appropriate, and a hold time validated at the process temperature. A powder on a carrier adds surface area. The oil is spread over the carrier, so more of it is exposed to air, and the carrier's moisture can move into the oil phase. Measure the peroxide value of the extracted oil, not only the powder's appearance, and keep the powder in a sealed, opaque pack. The formulator decides whether an overage is needed; that is a label and stability decision. It does not repair a pack that lets oxygen in, and it does not replace a stability arm on the finished format. ## How the shelf life is set We do not publish a single shelf-life number for squalene, because the pack and the storage condition set it. The assigned retest period belongs on the specification and is supported by the stability file for that pack. A number without a pack, a condition and a test panel is not a shelf life; it is a claim. After the retest period, re-assay the retained sample before extending use. Do not extend by assumption, and do not carry a bulk figure across to a repacked bottle or a softgel. The product hub lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the methods section explains the analytical tests; the quality page describes the release workflow. ### 04 Squalene: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/fatty-acids/squalene/moq/ Reviewed: 2026-11-19 The MOQ for squalene is 1 kg, supplied in a 1 kg amber bottle; the bulk pack is a 25 kg HDPE drum. Lead time is 1–7 days for the standard pack. A firm quotation needs the identity and assay, the pack, the destination and Incoterm, the document set and the intended use. In one lineOne kilogram is the starting order because the 1 kg amber bottle is the smallest pack that can be sampled, tested and traced as a lot. ## Why the minimum is 1 kg A 1 kg bottle covers a bench-scale trial, a retained sample and an independent identity test. It is also small enough to ship as a parcel, which matters when a formulator needs material before the production plan is fixed. The bottle is a commercial unit with a lot code, not a scoop from a bulk drum. Below 1 kg the material is usually split from a larger lot and repacked. That adds handling, loses the original pack identity and makes traceability harder, without changing the chemistry. The 25 kg drum is the bulk unit: it reduces handling per kilogram, but it commits inventory and a longer storage period. The MOQ is a pack decision, not a volume incentive. For a product that oxidises, the pack size is also a quality decision. A large drum that is opened many times accumulates headspace and moisture. A smaller bottle that is used up quickly can be the better choice even when the unit handling is higher. ## Packs and formats Standard squalene packs | Pack | Net weight | Typical use | Notes | Amber bottle | 1 kg | Trial, sample, small batch | Light barrier; keep closed; lot code on the label | HDPE drum | 25 kg | Production | Tight closure; lot code on drum and label | Powder on carrier | On request | Powder blends and stick packs | Carrier and oil load declared; different specification The catalog form is the oil. A powder on a carrier is a different specification, not a packing choice: the carrier, the oil load and the assay basis all change. If the dosage form needs a free-flowing solid, say so before the quotation, because the change moves the specification lines and may move the lead time. ## Lead time and dispatch The standard pack is quoted at 1–7 days from order confirmation. That window covers picking, document preparation and dispatch; it does not include shipping transit, customs clearance or the customer's own quality release. A powder-on-carrier batch or a non-standard fill adds time, and the quotation should state it separately. Ask for the dispatch date, not only the lead time. A 25 kg drum may travel on a pallet and a 1 kg bottle may travel as a parcel; the Incoterm decides who books the freight and who clears the entry. The documents should travel with the lot, not after it. ## What a quotation needs Six items make a quotation firm enough to compare: - Product and identity. Squalene, CAS 111-02-4, olive-derived, with the source declared. - Specification. Assay by GC, refractive index, iodine value, moisture, heavy metals and microbiology. - Quantity and pack. 1 kg amber bottle, 25 kg HDPE drum, or a powder-on-carrier variant. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, specification, SDS, source declaration and any market-specific statement the importer needs. - Intended use and market. Food, supplement, personal care or another use, and the market where it will be sold. A quotation without the intended use is incomplete, because food and personal-care uses do not share a regulatory file. The commercial terms are stated on the quotation, and the specification revision should be named in it so that the offer and the certificate refer to the same document. ## The sample is a lot, not a demonstration The 1 kg bottle is the qualification sample. Test identity, assay, refractive index, iodine value, moisture and microbiology before scaling, and keep a retained sample from the same bottle. The lot code on the sample, the COA and the quotation should match. A sample that cannot be traced to a lot is a demonstration, not a qualification. A trial smaller than 1 kg is drawn from a 25 kg HDPE drum and repacked under its own traceability record, not as the catalog amber bottle; raise the request before the order. Record the parent lot on the split; the bench oil and the next drum need not share a lot, and for an oil that oxidises the difference can matter. For an oxidation-sensitive oil, test the sample's peroxide value as well as its release lines. A sample that meets the certificate but has spent weeks in a warm parcel may not represent the next drum. ## Terms to settle before the first order The offer for a 1 kg amber bottle or 25 kg HDPE drum should fix the trade term, the dispatch window, the paperwork and the commercial conditions, then add the quality side: the GC assay revision, the refractive-index and iodine-value limits, the lot certificate, the bottle kept back for reference, the retest interval and the route for approving a source or process change. A quality agreement signed before the first drum is easier than one negotiated after a failed lot. Returns and replacements follow the quotation and the quality agreement. A lot that fails the agreed specification should be handled through the retained sample and a joint re-test, not through a photograph of the oil. Ask who pays for the referee test, and which laboratory is acceptable to both sides. The product hub carries the catalog specification; the COA page lists the release tests; the compliance page covers the market files; the methods section explains the analysis; the quality page describes the release workflow. ### 05 The regulatory file for squalene URL: https://nutrition.rainwoodbio.com/products/fatty-acids/squalene/compliance/ Reviewed: 2026-11-19 Squalene is usually bought as a food or supplement oil, and squalane as a personal-care ingredient. The regulatory file has to name the exact material, the use and the destination before it can cite a route. The buyer's regulatory team confirms that route. This page lists the documents and checks that belong in the file, so the specification and the commercial pack can be reviewed together. In one lineSqualene is usually a food or supplement material and squalane a cosmetic one; the file has to name the use, the market and the exact material before it can cite a route. ## What the file contains A complete file answers four practical questions. What is the material, and which specification version is being bought? Which lot is being released, and what does its certificate report? Which limits and labelling rules apply to the finished product? And what changes if the source, the process or the pack changes? The certificate answers the lot question, the technical data sheet answers the specification question, and the safety data sheet answers the handling question. None of them answers the route question on its own. The first decision is the use. Squalene sold as a food or supplement oil follows the food framework; squalane sold for personal care follows the cosmetic framework. The two files are not interchangeable, even when the materials come from the same olive source. A cosmetic-grade certificate does not establish a food use, and a food-grade certificate does not authorise a cosmetic claim. Allergen and GMO statements belong in the squalene file, together with the olive-origin record, the residual-solvent statement and any declaration the customer asks for. If the lot is missing one of them, name the gap before the order rather than at the port. A versioned list — specification revision, COA date, origin certificate — holds up better in an audit than a folder of undated PDFs. ## European Union The EU file is built from the specification, the contaminant results and the label. General food law, labelling and contaminant rules apply alongside any product-specific route. For a food or supplement use, the relevant instruments include Regulation (EC) No 178/2002 on general food law, Regulation (EU) No 1169/2011 on food information, Directive 2002/46/EC on food supplements and Regulation (EU) 2023/915 on contaminants. If the source or the process raises a novel-food question, Regulation (EU) 2015/2283 is the framework to check. For a personal-care use, Regulation (EC) No 1223/2009 applies instead. The buyer's regulatory team identifies the route for the destination member state and confirms that the specification matches the material being placed on the market. As of this review, the current consolidated text is the reference, not a summary. Great Britain and Northern Ireland are checked separately: GB food law and, where relevant, the GB register apply in Great Britain, while Northern Ireland follows the EU framework. ## United States The US file is built around the exact dietary ingredient or food substance and its intended use. A supplement use sits under the dietary-supplement framework, including the current good-manufacturing-practice rules in 21 CFR 111; a conventional food use needs a food-additive or GRAS basis. If the material is a new dietary ingredient, the notification route in 21 CFR 190.6 is the one to check. The label and the claim are reviewed separately from the certificate. The supplier should be able to name the basis it relies on and point to the supporting document. The buyer confirms that the basis covers the finished product, the dose and the claim, and that the source statement is adequate for the label. As of this review, the current text of the relevant regulation controls. ## Contaminants and limits The contaminant panel is a finished-product calculation, not only a drum result. The table below pairs the catalog limits with the usual supplement references; the current destination text and the daily dose decide the final limit. Contaminant limits to confirm for the finished product | Parameter | Catalog limit | Finished-product check | Lead (Pb) | ≤3 mg/kg | EU supplement reference 3.0 mg/kg; confirm the current text | Arsenic (As) | ≤2 mg/kg | No harmonised EU supplement limit; the customer or market limit applies | Cadmium (Cd) | ≤1 mg/kg | EU supplement reference 1.0 mg/kg; check the category | Mercury (Hg) | ≤0.1 mg/kg | EU supplement reference 0.10 mg/kg | Moisture | ≤0.1% | Hydrolysis and shelf-life check in the finished format | Process contaminants | — | Mineral-oil and polycyclic-aromatic-hydrocarbon statements where the market requires An oil that comes from a refining stream deserves a process-contaminant question. The answer may be a statement, a test result or a justified absence, but it should be in the file before the first shipment. The contaminant calculation uses the dose: a limit expressed per kilogram of oil is not the same as a limit per daily serving. ## Label and claims The label names the material, the quantity and the source in the form the destination requires. “Squalene” and “squalane” are different names and cannot be used interchangeably. The claim review is separate: the brand's regulatory reviewer confirms that the wording is allowed for the product, the form and the market. No disease-related claim is made for this material on this page, and the certificate does not approve a claim. A structure-function statement, a nutrient content statement and a cosmetic function statement each follow a different rule set. The same oil can be a food ingredient in one market and a cosmetic ingredient in another, and the label language changes with the use. The file should record which use the label was reviewed against. ## The document set The core set is the specification, the certificate of analysis for the lot, the technical data sheet and the safety data sheet. For a food or supplement use, add the source declaration, the allergen statement, the GMO statement, the residual-solvent statement and the process-contaminant statement where applicable. For a personal-care use, add the cosmetic product-safety information that the brand's file requires. Certificates of analysis, halal or kosher statements and customer-specific declarations are supplied where available, not assumed. The document list should carry a version and a date, and the specification revision on the certificate should match the revision on the purchase order. The product hub carries the catalog data; the COA page explains the certificate; the identity page covers the analytical evidence; the methods section explains the tests; the quality page describes the release file. ## Checklist before the first order - Specification version, CAS number and source are named. - The intended use — food, supplement or personal care — is stated. - COA, TDS, SDS, allergen, GMO, origin and residual-solvent statements are on file. - The contaminant results are converted to the finished-product dose. - The label and the claim have been reviewed for the destination. - The source, process and pack are under change control. - The quotation, the specification and the certificate refer to the same version. ### 06 How to prove a squalene lot is squalene URL: https://nutrition.rainwoodbio.com/products/fatty-acids/squalene/identity/ Reviewed: 2026-11-19 A squalene lot is squalene when the GC assay, the refractive index and the iodine value agree, and the source record matches the certificate. Appearance cannot do the job: squalane is also a colourless oil, and a vegetable-oil dilution can look the same. The three figures answer three different questions — how much, which hydrocarbon, and how many double bonds. In one lineSqualene identity is an agreement between three measurements: the GC assay, the refractive index and the iodine value, with the source record behind them. ## The identity layers A certificate can name the right material and still fail to prove it. The layers below are separate questions, and each one needs its own evidence. A supplier who answers only the first has described the paperwork, not the oil. Layers of squalene identity | Layer | Question | Test | What it proves | Document | Is the material named? | Name, CAS number, source | Paperwork only | Chromatography | Is the main peak squalene? | GC with a squalene standard | The hydrocarbon | Refraction | Does the optical property fit? | Refractometry at 20 °C | Consistency, not specificity | Unsaturation | Is the oil unsaturated? | Iodine value by Wijs | The double-bond content | Mass balance | Is it diluted? | Assay, moisture and iodine value together | Consistency of the numbers ## The unsaturation ratio Squalene has six double bonds and a theoretical iodine value of about 370.7 g I₂/100 g. The catalog window is 350–380, which is roughly 94–102% of that figure. A saturated hydrocarbon such as squalane contributes almost nothing to the iodine value, so the figure is a direct measure of how much of the oil is unsaturated. The ratio between the assay and the iodine value is the useful check. If a lot is 90% squalene and the remaining 10% were squalane, the expected iodine value would be about 0.9 × 370.7 = 334, below the 350 floor. A lot that reports 90% assay and an iodine value of 355 is therefore not a simple 10% squalane cut; the balance must contain other unsaturated hydrocarbons, or one of the two results is biased. The two lines together are stronger than either one alone. The refractive index adds a third coordinate. Squalene sits at 1.494–1.499 and squalane at about 1.450–1.452, so a result near the lower end points to a saturated or diluted oil even when the assay looks acceptable. Temperature matters: report the refractive index at 20 °C, or correct it, because the value drifts with the cell temperature. ## X-ray diffraction and the limits of the method Squalene is a liquid at room temperature, so it has no crystal lattice and no useful X-ray diffraction pattern. XRD is not a release test for the oil, and a certificate that reports “XRD conforms” for a liquid should be read with care. Asking for a diffraction pattern as proof of squalene is asking the wrong test. The technique earns its place in the powder-on-carrier format. There, XRD can show whether the carrier is crystalline or amorphous and can detect a crystalline diluent that the oil load figure does not explain. It describes the solid state of the carrier; it does not measure the squalene. Use GC, refractive index and iodine value for the oil, and keep XRD for the solid matrix. ## What adulteration looks like Squalene substitutions and the signals | Adulterant | What it does | Signal | Test | Squalane | Same skeleton, no double bonds | Iodine value near zero; refractive index near 1.451 | Iodine value, refractive index, GC | Vegetable oil | Adds triglycerides and fatty acids | Fatty acid methyl esters; saponification value rises | GC after transesterification, saponification value | Mineral oil | Adds saturated hydrocarbons | Unresolved GC hump; lower iodine value and refractive index | GC-MS, iodine value, refractive index | Partly hydrogenated squalene | Reduces unsaturation without going to zero | Iodine value between squalene and squalane | Iodine value, GC profile | Water | Raises moisture; hazes the oil | Moisture above 0.1% | Karl Fischer The most likely substitution is the one that looks identical: squalane. It is colourless, odourless and miscible with squalene, and the unsaturation figures expose it at once. A vegetable-oil dilution is easier to see on a GC run once the oil is transesterified, and the saponification value rises sharply because a triglyceride is an ester and squalene is not. Colour is the weakest signal of all. Source claims are a separate question. The certificate can prove the hydrocarbon, but it does not prove that the oil came from olives. That is a traceability question: ask for the source declaration, the supplier's batch records and, where the claim is contested, a provenance investigation agreed with the laboratory. ## How to write the identity into the specification - “Squalene, olive-derived, CAS 111-02-4, C₃₀H₅₀.” - “Assay ≥90.0% by GC; report the standard and the integration basis.” - “Refractive index 1.494–1.499 at 20 °C; report the temperature.” - “Iodine value 350–380 g I₂/100 g by Wijs.” - “Moisture ≤0.1% by Karl Fischer; heavy metals and microbiology as listed.” - “No squalane substitution; report any squalane peak above the agreed limit.” - “Source and distillation step declared; lot code matched to the retained sample.” ## Five questions for the supplier - What is the GC assay, and which standard and integration basis were used? - What are the refractive index and its measurement temperature? - What is the iodine value, and which method produced it? - Can you provide the chromatogram and the source declaration, not only the certificate summary? - If the lot is disputed, will you accept a joint re-test on the retained sample? Five direct answers amount to an identity file. A single assay percentage does not. The product hub carries the catalog specification; the COA page shows where each figure sits on the certificate; the grades page compares the source and format options; the methods section explains the analytical approach; the quality page describes the release file. ### 01 What the COA for wheat germ oil actually contains URL: https://nutrition.rainwoodbio.com/products/fatty-acids/wheat-germ-oil/coa/ Reviewed: 2026-11-19 A wheat germ oil certificate reports three measurements that are easy to confuse: the fatty-acid profile by GC, the free fatty acid expressed as oleic acid, and the peroxide value. Alongside them it carries moisture, appearance, heavy metals and microbiology, each tied to a method and a limit. The limits here are the catalog specification; the batch COA records what one lot measured. In one lineA wheat germ oil certificate is only complete when the fatty-acid profile, the free fatty acid and the peroxide value are reported together, each with its method. ## Reading the certificate as evidence A certificate can be audited only if each row names the test, the method, the basis and the limit. “Conforms” alone leaves a verdict without a trail. For an oil the basis matters as much as the number. Identity is not the linoleic line: the whole profile has to agree with the reference, including the minor acids. A lot can reach 55% linoleic and still be a blend. Identity, composition and oxidation limits · cold-pressed wheat germ oil · CAS 8006-95-9 | Parameter | Method | Release limit | Reported on | Linoleic acid (C18:2) | GC-FID of fatty-acid methyl esters | 50.0–60.0% | Share of total fatty acids | Oleic acid (C18:1) | GC-FID | 15.0–25.0% | Share of total fatty acids | Palmitic acid (C16:0) | GC-FID | 15.0–20.0% | Share of total fatty acids | Free fatty acid | Titration; expressed as oleic acid | ≤0.50% | Oil as sold | Peroxide value | AOCS Cd 8b-90 or ISO 3960 | ≤5.0 meq O₂/kg | Oil as sold | Moisture | Karl Fischer | ≤0.1% | Oil as sold | Identification | GC profile against a reference oil | Profile conforms | Total fatty-acid profile | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Oil as sold | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Oil as sold Appearance is qualitative: dark yellow to brownish, clear to slightly hazy. A wax sediment is normal in a cold-pressed oil; a duller colour or a paint-like smell points to oxidation and should be read with the peroxide value. ## The profile is a share, not a mass The GC result is a normalised share, not a weight per bottle. Area normalisation divides each peak by the total identified area; internal standardisation gives an absolute mass. For a specification written as “50.0–60.0%”, the first basis is the usual one, and the certificate should say so. A 55% figure means 55% of the fatty-acid methyl esters, not 55 g of linoleic acid in every 100 g of oil. Free fatty acid measures the acids released by hydrolysis, not the total fatty acids in the triglyceride. It is expressed as oleic acid by convention, even in an oil whose oleic share is only 15–25%. A low FFA means little hydrolysis has occurred; it says nothing about the linoleic share. The peroxide value measures hydroperoxides, the first stable products of oxidation, in milliequivalents of oxygen per kilogram. It rises before the odour and colour change. FFA and PV move for different reasons: water and heat drive hydrolysis, while oxygen, light and trace metals drive oxidation. Moisture is the third variable. The ≤0.1% limit is tight for an oil and matters because water shifts the hydrolysis equilibrium. A lot close to the limit has less headroom in a humid warehouse, and the pack seal becomes part of the specification. ## Release limit, batch result and the arithmetic The specification fixes the boundary; the certificate should show what this lot did against it. That means two columns — the limit and the measured result — with a method note for each row. A result column that simply repeats the range has not measured anything. What the result column should contain | Parameter | Release limit | Result column | Linoleic acid | 50.0–60.0% of fatty acids | Measured area percentage, with column, standard and chromatogram | Free fatty acid | ≤0.50% as oleic acid | Measured percentage and the titration method | Peroxide value | ≤5.0 meq O₂/kg | Measured value, method and test date | Moisture | ≤0.1% | Measured percentage by Karl Fischer | Heavy metals | Per element | A measured figure in mg/kg for each element “Passes specification” should be reachable from the numbers. Heavy metals need a figure per element, not one sum; microbiology a count plus an absence statement; the profile the three major acids and the chromatogram. A lot released at 4.5 meq O₂/kg is inside the catalog limit and has less shelf life than one released at 1.0. The release result and the storage history decide how the lot behaves in a softgel or an oil blend; the stability page takes that further. ## What moves between batches Wheat germ oil is an agricultural product. Variety, region, crop year and the germ fraction change the linoleic, oleic and palmitic shares, usually within the catalog ranges. A lot at the edge of the linoleic range has less room for blending or for refining losses. The process moves the minor fraction more than the profile. Cold pressing keeps tocopherols, phytosterols and waxy sediment; refining removes part of them along with colour and odour. A switch from cold-pressed to refined can leave linoleic almost unchanged and still be a different material for the label. Colour and odour are the practical early signals. Cold-pressed oil is dark and strongly nutty; refined oil is lighter and milder. A batch that turns noticeably darker or rancid should be reviewed with its PV and FFA, not rejected on appearance alone. ## When to order an outside test Outside testing is worth ordering in four situations: a source you have not used, a first shipment to a regulated market, a release that is disputed, and a wheat or gluten statement on the label. Ask for GC-FID with the chromatogram, column, standard and integration; sterol and tocopherol profiles; FFA and PV by named methods; moisture by Karl Fischer; ICP-MS for the metals; and microbiology. If a gluten-free or wheat-free statement is planned, add a protein or gluten test with a validated method and a stated limit of quantification. An oil matrix is not a flour matrix, so the extraction has to be fit for the material. “Not detected” without a detection limit tells you how far the method can see, not whether the substance was there. Keep the chain of custody: the sample tested should be the retained sample, and the report should carry the lot code on the bottle or drum. A contested result goes back to the retained sample, the certificate and the agreed specification. ## Six lines that decide whether two quotations match Compare six lines: grade and process; profile basis and chromatogram; FFA and PV with methods and test dates; moisture; allergen statement; pack and lot trace. Two offers that both say “wheat germ oil 55% linoleic” can differ on every one. The catalog specification sits on the wheat germ oil product page. The tests that separate wheat germ oil from another seed oil are on the identity page; the grade fork is on the grades page. The methods behind the numbers are described in the analytical methods index, and the release workflow is on the quality page. The carrier-borne version of the same logic is on the flaxseed oil powder page. ### 02 Cold-pressed or refined wheat germ oil: choosing a grade URL: https://nutrition.rainwoodbio.com/products/fatty-acids/wheat-germ-oil/grades/ Reviewed: 2026-11-19 Wheat germ oil is supplied cold-pressed or refined, and the two are different specifications. Cold pressing keeps the colour, the odour and a larger unsaponifiable fraction, and leaves a higher free fatty acid; refining lowers both the free fatty acid and the colour and removes part of the tocopherol and sterol fraction. The grade has to be named before the fatty-acid profile, the allergen statement and the dose form can be settled. In one lineThe grade decides how much colour, odour and unsaponifiable matter the oil carries, and the fatty-acid profile has to be re-stated for each grade. ## Why wheat germ oil comes in two grades The germ is a small part of the wheat kernel, and the oil is pressed or extracted from it. A mechanical press at low temperature is the cold-pressed route; the refined route adds degumming, neutralisation, bleaching and deodorisation, and sometimes winterisation to remove waxes. The two routes start from the same germ and end at different materials. The difference is not cosmetic. Free fatty acid, colour, odour, the unsaponifiable fraction and the sediment all move, and the label may name the process. “Cold-pressed” is a process description, not a compositional guarantee: the profile still has to be measured on the lot. ## The two grades side by side Cold-pressed and refined wheat germ oil compared | Dimension | Cold-pressed | Refined | Process | Mechanical press, low heat, no solvent | Degumming, neutralisation, bleaching, deodorisation | Free fatty acid | Higher; catalog limit ≤0.50% | Usually lower | Colour | Dark yellow to brownish | Lighter yellow | Odour and flavour | Strong, nutty, wheat-like | Mild, neutral | Tocopherols and sterols | Largely retained | Partly reduced | Peroxide value | Depends on press and storage; catalog ≤5.0 meq O₂/kg | Usually lower at release; can rise in storage | Sediment and haze | Waxes and cell debris can settle | Winterisation reduces haze | Wheat protein | Low but not zero; allergen assessment needed | Further reduced, but not assumed absent | Typical use | Softgel, oil blend, a label that names the process | Neutral blend, pale softgel, consistent flavour The table gives a direction, not a set of release values. Only the catalog limits — linoleic 50.0–60.0%, oleic 15.0–25.0%, palmitic 15.0–20.0%, FFA ≤0.50%, PV ≤5.0 meq O₂/kg, moisture ≤0.1% — are the gate for the cold-pressed grade. A refined grade needs its own specification, because the limits and the minor fraction are different. ## Colour, haze and handling Cold-pressed wheat germ oil is a dark, full-bodied oil with a strong cereal odour. It can be clear to slightly hazy, and a sediment of waxes may settle over time; the catalog allows the haze, so a hazy bottle is not automatically out of specification. Refined oil is lighter and cleaner-looking, and a customer who judges the oil by colour will read the two grades as different products even when the fatty-acid profile is close. For a softgel, colour and odour are part of the consumer experience. A dark oil shows through a clear shell and flavours the fill; a refined oil keeps the capsule pale and the taste mild. For an oil blend, the cold-pressed odour can dominate a delicate formula, while the refined grade gives the formulator a neutral base. Neither grade is the right one in the abstract; the grade has to match the product. The powder-on-carrier format is available on request. The carrier takes up part of the mass, so the linoleic figure on the powder is the oil's figure scaled by the oil load; the grade and the load both have to be declared. A powder made from cold-pressed oil carries the colour and odour of that oil, which can limit how much fits in a stick pack. ## Dose arithmetic and the label The dose form sets the mass, and the mass sets how much oil the label can claim. A 500 mg softgel of cold-pressed oil carries 250–300 mg of linoleic acid at the catalog range; a 1,000 mg softgel carries 500–600 mg. A refined oil with the same profile carries a similar fatty-acid mass, because refining does not concentrate linoleic, but the minor fraction is lower. Linoleic acid delivered at the catalog range, by fill weight | Fill | At 50.0% linoleic | At 60.0% linoleic | 250 mg | 125 mg | 150 mg | 500 mg | 250 mg | 300 mg | 1,000 mg | 500 mg | 600 mg These are arithmetic, not an intake recommendation. If the label declares vitamin E from the oil, the tocopherol figure has to be measured and declared on the label's basis; it cannot be inferred from the grade name. If the label names the cold-pressed process, the process record and the grade belong in the specification. ## What to write into the specification - “Wheat germ oil (Triticum vulgare germ oil), CAS 8006-95-9, cold-pressed or refined — state which.” - “Linoleic 50.0–60.0%, oleic 15.0–25.0%, palmitic 15.0–20.0% by GC-FID, on a stated basis.” - “Free fatty acid ≤0.50% expressed as oleic acid; peroxide value ≤5.0 meq O₂/kg; moisture ≤0.1%.” - “Appearance and colour range; sediment and haze allowed within the stated range.” - “Unsaponifiable matter or tocopherol and sterol profile where the label uses them.” - “Wheat allergen statement; a gluten statement only where a validated result supports it.” - “Pack, storage condition and retest period.” We supply the cold-pressed grade. A refined grade is a separate purchase, with its own FFA and colour limits; swapping one for the other needs a written change note and a fresh label review. ## When the other grade is the wrong choice Choose the refined grade when the product needs a light colour, a mild taste, a low free fatty acid at release, or a consistent flavour across lots. Choose the cold-pressed grade when the label names the process and the darker colour and fuller odour are part of the product. Choose neither when the formula cannot carry a wheat declaration; the allergen question is set out on the compliance page. The grade is not a substitute for the profile. A refined oil can meet the appearance and FFA expectations and still sit outside the linoleic range; a cold-pressed oil can be dark and fresh or dark and oxidised. Read the grade, the profile, the oxidation values and the allergen statement together. The catalog specification is on the product page; the release lines are on the COA page; the oxidation behaviour is on the stability page; the pack and minimum are on the MOQ page; the tests are described in the methods index, and the release workflow is on the quality page. The carrier-borne grade comparison is on the flaxseed oil powder page. ### 02.1 Wheat germ oil vs sunflower oil: two seed oils, two profiles URL: https://nutrition.rainwoodbio.com/products/fatty-acids/wheat-germ-oil/grades/wheat-germ-oil-vs-sunflower-oil/ Reviewed: 2026-11-19 Wheat germ oil and sunflower oil are both linoleic-rich seed oils, and that shared figure hides the differences. Wheat germ oil carries 50–60% linoleic, 15–25% oleic and 15–20% palmitic, with a relatively large unsaponifiable fraction; a refined high-linoleic sunflower oil typically carries 60–70% linoleic, 15–25% oleic and 5–7% palmitic, with a small unsaponifiable fraction. The wheat source also brings an allergen declaration that sunflower does not. In one lineWheat germ oil and sunflower oil are both linoleic seed oils, but the palmitic share, the unsaponifiable fraction, the colour and the wheat allergen separate them. ## Two seed oils, two profiles Wheat germ oil is pressed from the germ of wheat, Triticum aestivum. Sunflower oil is pressed from the seed of Helianthus annuus. Both are triglyceride oils dominated by linoleic acid, but the rest of the profile and the minor fraction are not the same, and the source decides the allergen position. Wheat germ oil and high-linoleic sunflower oil compared | Dimension | Wheat germ oil | Sunflower oil | Source | Germ of wheat | Seed of sunflower | Linoleic acid (C18:2) | 50.0–60.0% (catalog) | About 60–70% in the high-linoleic grade | Oleic acid (C18:1) | 15.0–25.0% | About 15–25% in the high-linoleic grade | Palmitic acid (C16:0) | 15.0–20.0% | About 5–7% | Unsaponifiable fraction | Relatively large: tocopherols, sterols, octacosanol | Small in refined oil | Colour and odour | Dark yellow to brownish; strong nutty odour | Light yellow; mild odour | Allergen | Wheat, a named allergen in the EU, the US and the UK | Not on the Annex II list The table uses the catalog range for wheat germ oil and typical refined high-linoleic sunflower values for comparison. Sunflower also forks into a high-oleic grade, which is a different oil again; the comparison below uses the high-linoleic grade unless it says otherwise. ## What the fatty-acid numbers mean per gram Per gram of oil, the linoleic mass is the percentage applied to the oil. At the catalog range, 1 g of wheat germ oil carries 500–600 mg of linoleic acid; 1 g of high-linoleic sunflower oil carries about 600–700 mg. The gap is real but smaller than the gap in palmitic acid, where wheat germ oil carries roughly three times as much. Linoleic and palmitic delivered per gram of oil | Oil | Linoleic per 1 g | Palmitic per 1 g | Wheat germ oil, catalog 50–60% linoleic | 500–600 mg | 150–200 mg | Sunflower oil, high-linoleic, typical 60–70% | 600–700 mg | 50–70 mg | Sunflower oil, high-oleic, typical | 20–100 mg | 30–50 mg The arithmetic matters for a softgel. A 1,000 mg capsule of wheat germ oil delivers 500–600 mg of linoleic; the same capsule of high-linoleic sunflower oil delivers 600–700 mg. If the label declares a linoleic amount, the oil and the fill weight have to be chosen together, and any overage for shelf life has to be set from stability data rather than assumed. High-oleic sunflower oil is a different purchase: oleic acid is typically 75–90% and linoleic is low. When the label wants a monounsaturated oil, the high-oleic grade is the one to compare, and wheat germ oil is not a substitute for it. ## The unsaponifiable fraction The unsaponifiable fraction is the part of the oil that is not a fatty acid or a triglyceride. In wheat germ oil it carries tocopherols, phytosterols and the long-chain alcohol octacosanol; cold pressing keeps more of it, and refining removes part. Sunflower oil also contains tocopherols, mainly alpha-tocopherol, but a refined sunflower oil has a small unsaponifiable fraction overall. This fraction is why the two oils behave differently in a formula even when their linoleic figures are close. It also means that a vitamin E or “unsaponifiable” claim on wheat germ oil has to be measured, not inferred. A label that declares vitamin E needs the tocopherol result and the declaration on the label's basis; the oil's reputation is not a number. The colour follows the same fraction. Cold-pressed wheat germ oil is dark because it carries pigments and minor components that refining removes. A pale wheat germ oil is likely refined, whatever the front of the pack says, and the grade belongs in the specification. ## The allergen line Wheat is the source of wheat germ oil and is a named allergen in the EU, the US and the UK. A cold-pressed oil is not a highly refined oil, and protein carry-over cannot be assumed to be zero. The working position is to declare the wheat source unless the lot has protein and gluten evidence and the destination advice supports a different reading. A “wheat-free” statement is not available for this material. Sunflower is not on the Annex II list, is not a major food allergen in the US and is not a named allergen in the UK. That does not make a sunflower oil automatically free of cross-contact, but it removes the source allergen from the label arithmetic. For a product that must avoid a wheat declaration, sunflower is the simpler oil; for a product whose label names wheat germ oil, the declaration is part of the design. ## Oxidation and the pack Both oils are high in linoleic acid, and linoleic acid oxidises readily. Wheat germ oil's tocopherols slow the reaction, but they are consumed, and a refined oil has less of them to start with. High-oleic sunflower oil is more oxidatively stable than either high-linoleic oil because oleic acid has one double bond rather than two. Read the peroxide value and the free fatty acid at release, and read them again after storage. A wheat germ oil at 4.5 meq O₂/kg has less shelf life than one at 1.0, even though both are inside the catalog limit. Protect either oil from light and headspace; the pack, not the fatty-acid table, decides how long the oil stays fresh. ## When to choose which Choose wheat germ oil when the label or the formula names it, when the darker colour and fuller odour are acceptable, and when the wheat declaration fits the product. Choose high-linoleic sunflower oil when the formula needs a light, mild, neutral oil with a higher linoleic share, or when a wheat declaration is unacceptable. Choose high-oleic sunflower oil when the label wants a monounsaturated oil and a longer shelf life. Do not read the two as interchangeable on a linoleic figure. The palmitic share, the unsaponifiable fraction, the colour, the odour and the allergen statement all move together. The catalog specification is on the wheat germ oil product page; the grade fork is on the grades page; the identity tests are on the identity page. Method background is in the methods index, release practice on the quality page, and the carrier-borne comparison on the flaxseed oil powder page. ### 03 Wheat germ oil stability: oxidation, hydrolysis and the pack URL: https://nutrition.rainwoodbio.com/products/fatty-acids/wheat-germ-oil/stability/ Reviewed: 2026-11-19 Wheat germ oil fails in two ways: it oxidises, and it hydrolyses. Oxidation raises the peroxide value and produces the off-odour and colour change; hydrolysis raises the free fatty acid. Light, heat, oxygen and trace metals drive the first; water and heat drive the second. How long a lot stays inside its limits is a property of the pack and the storage condition, not of the release certificate. In one lineThe peroxide value at release is a starting point, not a shelf life: light, heat and headspace decide how fast a wheat germ oil lot moves past it. ## The oil in the pack: oxygen, light and water In its pack the oil sees oxygen in the headspace, light through the container and heat from the store. The catalog limits — peroxide value ≤5.0 meq O₂/kg, free fatty acid ≤0.50%, moisture ≤0.1% — are release gates, not storage allowances. A lot released near a limit has less room than one released at half of it. The natural tocopherols in cold-pressed wheat germ oil slow oxidation, but they are consumed as they do so. A cold-pressed oil is not protected indefinitely by its own minor fraction, and a refined oil has less of that fraction to start with. The pack, not the oil's reputation, is the barrier. Water is the second route. An oil with moisture at the limit hydrolyses faster when it is warm, and the free fatty acid climbs without any change in the fatty-acid profile. Keep the bottle closed, keep the drum liner sealed, and do not store the oil in a humid room with the cap off. ## Blends, emulsions and softgel fills Wheat germ oil does not form an aqueous solution. The formats that matter are the oil blend, the emulsion and the softgel fill. In a blend the oil is diluted by other oils and the mixture's oxidation rate is a weighted average, not the rate of the wheat germ oil alone. In an emulsion the oil is dispersed into droplets, and the surface area exposed to oxygen and to metal ions rises sharply. A softgel is a closed system, but not a sealed one. The shell contains water and glycerol, and water can migrate between the shell and the fill; a shell that dries or cross-links changes the barrier. The fill's peroxide value and free fatty acid should be measured at release and during storage, not assumed from the bulk oil's certificate. For a beverage emulsion, heat, pH, oxygen and light act together. A bulk-oil stability result does not transfer to the emulsion; the matrix and the process change the rate. If a liquid is unavoidable, validate the hold time and the shelf life in the finished product. ## What drives degradation Factors that move wheat germ oil during storage | Factor | What it does | Control | Light | Photo-oxidation; colour fade and off-odour | Opaque or amber pack; dark store | Heat | Accelerates oxidation and hydrolysis | Cool store; controlled process | Oxygen | Headspace oxygen forms hydroperoxides | Low headspace; nitrogen if specified | Water | Hydrolysis raises free fatty acid | Sealed pack; dry store | Trace metals | Iron and copper catalyse oxidation | Avoid metal contact; check equipment | Tocopherols | Natural antioxidants are consumed over time | Protect the pack; measure if claimed These factors interact. A warm, bright store with a half-empty bottle combines light, heat and a large oxygen headspace, and the oil can move from inside the limit to a rancid note in weeks. The useful question is not whether wheat germ oil is stable, but how long it stays inside the agreed limits in this pack at this condition. ## A stability protocol for the ingredient A protocol worth reading names four things: the pack, the condition, the time points and the tests. A long-term arm at 25 °C/60% RH and an intermediate arm at 30 °C/65% RH model a warehouse; an accelerated arm at 40 °C/75% RH puts pressure on the pack. Add a light-exposure arm, because a dark incubator cannot reproduce a bottle on a bright shelf. At each point, measure peroxide value, free fatty acid, moisture, appearance and the fatty-acid profile; add tocopherols if the label declares them. Give the individual numbers, not a pass line, and name the pack, the lot family and the test dates. A summary that omits the pack is a summary for something else. ## The finished formula changes the answer A softgel combines the oil with a shell. The shell's water, the plasticiser and the fill's moisture can move across the interface, and the shell's oxygen barrier is thin. Check the fill's PV and FFA at release and after storage, and check the shell for brittleness, cross-linking and leakage. An emulsion adds water, emulsifier and air. The oil droplets are the oxidation site, and the emulsifier can carry trace metals. A powder-on-carrier adds a carrier and a larger surface area; the extracted oil's PV is the relevant number, not the powder's total fat. In each case the formulator sets any overage from measured data; an overage does not repair a pack that lets oxygen in. ## How the shelf life is set A single shelf-life figure for wheat germ oil would be misleading, because the pack and the storage condition set it. The retest period belongs on the specification and rests on the stability file for that pack. When the retest period ends, re-assay the retained sample before extending use; do not roll the date forward on assumption, and do not apply a bulk figure to a repacked bottle or a different drum. The wheat germ oil page lists the catalog packs, the COA page lists the release tests and the MOQ page the pack and lead time. The methods index explains the tests, the quality page the release workflow, and the flaxseed oil powder page the same problem in a carrier-borne oil. ### 04 Wheat germ oil: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/fatty-acids/wheat-germ-oil/moq/ Reviewed: 2026-11-19 The minimum order for wheat germ oil is 1 kg, packed in an amber bottle; bulk orders ship in a 25 kg HDPE drum. The catalog grade leaves in 1–7 days. To quote firmly, we need the grade, the fatty-acid limits, the quantity and pack, the destination and Incoterm, the documents and the intended use. In one lineOne kilogram in an amber bottle is the qualification unit, and the grade, the profile and the pack have to be named before the lot is allocated. ## Why the minimum is 1 kg One kilogram is enough to run a trial batch, hold a sample back and send a third portion for an independent test. It also travels as a parcel, which keeps a first order simple when production dates are still moving. Smaller amounts force a split from a larger batch. That repack adds handling and breaks the link between the material and the original lot record, even though the oil itself is unchanged. The 25 kg drum lowers handling per kilogram, but it ties up stock and keeps a light-sensitive oil in storage longer. The 1 kg pack is the unit we can release and trace; the drum is the same material at production scale. ## Packs and formats Standard wheat germ oil packs and on-request formats | Pack | Net weight | Typical use | What to confirm | Amber bottle | 1 kg | Trial, sample, small batch | Light barrier, cap seal and lot code | HDPE drum | 25 kg | Production | Inner liner, tamper seal and lot code | Powder on carrier | On request | Dry dose forms | Oil load and linoleic on the powder | Refined grade | On request | Neutral colour and flavour | Separate FFA and colour limits Amber bottle and drum are the catalog packs; powder on carrier and refined grade are separate specifications. The powder shifts the linoleic basis to the powder mass, and the refined grade moves FFA, colour and the minor fraction. Each has its own quote and stability file. Pack integrity is part of the specification. A bottle that has lost its seal or a drum with a torn liner has lost the light and oxygen barrier, and that is a quality event before it is a logistics one. Inspect the closure, the lot label and the liner when the goods arrive. ## Lead time and dispatch Released catalog stock ships within 1–7 days. The window opens when the order and the specification are settled; a bare enquiry does not reserve a lot. Grade, fatty-acid limits, pack, destination and documents are fixed first, because they decide which lot is picked and which papers are prepared. Non-catalog work — a powder on carrier, a refined grade, a different pack — has to be made and released, so its lead time is quoted separately. Legalisation, a named courier or a temperature-controlled leg also adds days that the warehouse cannot see. The quote gives the date for the actual order, and the order confirmation repeats it. Paperwork and picking run together. COA, TDS, SDS and source statement normally travel with the lot; a customer-specific form or a legalised certificate does not, so ask for it before the order is placed. ## What a quotation must state What two wheat germ oil quotations must state to be comparable | Detail | What to state | Why it changes the quote | Grade and process | Cold-pressed or refined | The FFA, colour and minor fraction follow | Profile and limits | Linoleic, oleic and palmitic ranges; FFA and PV limits | A tighter limit changes the lot selection | Quantity and pack | Bottle counts, drum counts or a mix | Determines how the order is handled | Destination and Incoterm | Country, delivery point and the trade term | Drives freight, paperwork and transit | Documents | COA, TDS, SDS, source and allergen statements | Extra declarations take time and review | Intended market and use | Supplement, food or another use; destination market | The route and the allergen review depend on it Six lines make two offers comparable. A single number, with no grade, limits, pack, terms, documents or market behind it, cannot be compared with anything. Two suppliers can both write “wheat germ oil 55% linoleic” and still be selling different packs, different limits and different allergen statements; the trial will show it. ## The sample is a lot, not a demonstration The 1 kg bottle is the sample we release against. Check the profile, FFA, PV, moisture and microbiology before scaling up, and keep part of the same bottle as the retained sample. Sample, COA and quotation should carry the same lot code; without that link the material is only a demonstration. A bench trial that needs less than 1 kg is a special request. The material would come from a repack, with its own record, not from the catalog bottle. Ask for it in writing and do not assume the bench portion and the production drum share a lot. ## Terms to settle before the first order The quote carries the commercial terms: Incoterm, pack, lead time and documents. The quality terms sit next to them, and they are easier to agree before the first order than after a problem: specification revision, COA per lot, retained sample, retest period and the route for a change of source or process. If a lot fails the agreed specification, the retained sample and a joint re-test decide the question, not a photograph. Agree in advance which laboratory is acceptable and who pays for the referee test. Replacements and returns follow the quote and the quality agreement. The wheat germ oil page holds the catalog specification; release lines are on the COA page; the wheat allergen and market files are on the compliance page; the MOQ glossary entry defines the term; the quality page describes the release workflow. For the carrier-borne version, see the flaxseed oil powder page, and the methods index covers the tests. ### 05 The regulatory file for wheat germ oil, wheat allergen included URL: https://nutrition.rainwoodbio.com/products/fatty-acids/wheat-germ-oil/compliance/ Reviewed: 2026-11-19 Wheat germ oil is a wheat-derived oil, and the wheat source is the first fact in the regulatory file. The oil is a food ingredient, but the allergen declaration, the contaminant limits and the destination route have to be confirmed before the label is signed. The buyer's regulatory team confirms the route; the supplier supplies the source and lot evidence. In one lineWheat germ oil is a wheat-derived ingredient before it is an oil, so the allergen declaration and the destination route are part of the specification. ## What the file has to answer A complete file answers four questions: what the material and its specification are; which lot is released and what its certificate reports; which limits and label rules apply; and what changes if the source, process or pack changes. The certificate answers the lot question, the TDS the specification and the SDS the handling; none answers the route alone. Wheat allergen statement. Wheat is the source of this oil. Wheat is a gluten-containing cereal in Annex II to Regulation (EU) No 1169/2011, a major US allergen under FALCPA, and a named UK allergen. The oil is pressed from the germ; a cold-pressed oil is not highly refined, so protein carry-over cannot be assumed to be zero. The working position is to declare the wheat source unless the lot has protein and gluten evidence and the destination advice supports another position. A “wheat-free” statement is not available for this material, and “gluten-free” needs a validated result against the destination threshold; the catalog sets no gluten limit. ## European Union Directive 2002/46/EC harmonises vitamins and minerals for food supplements; plant oils are left to national rules. The buyer's regulatory team names the route for the member state and checks that the specification describes the material actually sold there. Novel-food status is part of that check: the buyer confirms whether the destination handles the oil as a conventional ingredient with a history of use or requires a novel-food assessment, and the file carries the evidence. Labelling follows Regulation (EU) No 1169/2011. Annex II names cereals containing gluten, so the wheat source must be emphasised in the ingredient list unless a documented assessment supports another reading. Claims fall under Regulation (EC) No 1924/2006; a gluten-free or very low gluten claim is a separate rule under Regulation (EU) No 828/2014, with limits of 20 and 100 mg/kg on the food as sold. Contaminants are governed by Regulation (EU) 2023/915, which sets levels by food category; check the current text. ## United States In the United States the oil is sold as a dietary ingredient or a food ingredient. A dietary supplement must meet the cGMP in 21 CFR 111 and carry a Supplement Facts panel under 21 CFR 101.36. Wheat is a major food allergen under FALCPA, and the label must declare it unless the ingredient falls inside the statutory exception for a highly refined oil derived from a major allergen. A cold-pressed oil is not that exception by default, so plan the declaration on the wheat source and document any exception lot by lot. US federal law sets no heavy-metal maximum for supplements; in practice California's Proposition 65 governs, with a maximum allowable dose level for lead of 0.5 µg/day. An EU-compliant lot may still fail that calculation. US gluten-free labelling under 21 CFR 101.91 requires less than 20 ppm gluten, plus the rule's other conditions. ## United Kingdom In Great Britain the Food Supplements (England) Regulations 2003 and their Scottish and Welsh counterparts still apply as retained law; the allergen list is the retained Annex II, with wheat named. Northern Ireland applies EU food law under the Windsor Framework, so one UK launch can face two rule sets. GB claims follow the retained nutrition and health claims rules; read the current text. ## Contaminants and limits Contaminants are judged at the finished-product level, not at the drum. The destination text and the daily dose set the number that matters. Heavy metals: catalog panel and the usual supplement reference | Metal | Catalog limit | Usual supplement reference | Lead (Pb) | ≤3 mg/kg | 3.0 mg/kg in the supplement | Cadmium (Cd) | ≤1 mg/kg | 1.0 mg/kg in the supplement | Mercury (Hg) | ≤0.1 mg/kg | 0.1 mg/kg in the supplement | Arsenic (As) | ≤2 mg/kg | No harmonised EU supplement maximum; customer limit The catalog panel is a specification, not a statement that every destination applies the same numbers. Regulation (EU) 2023/915 sets levels by food category; an oil and a supplement can fall under different entries, so the same lot can pass one gate and fail the other. Confirm the category and convert the result to the finished-product dose. Wheat allergen is a labelling question, not a contaminant, and is handled above. ## Where the claim line sits Disease claims are not allowed in the EU, the US or the UK. EU and UK wording must match an entry in the authorised register and its conditions; a US structure/function claim needs substantiation and a 30-day FDA notification under 21 CFR 101.93. Linoleic acid is declared as a nutrient, and a nutrient figure is not a health claim. Vitamin E is the claim usually attached to wheat germ oil. If the label declares vitamin E, the tocopherol content has to be measured and the declaration made on the label's basis; it cannot be inferred from the oil's reputation. The wording must still come from the register or the notified statement. No claim wording is offered here; the brand's reviewer supplies and signs it. ## The document pack Documents that make up a wheat germ oil compliance file | Document | What it must show | Why it is needed | Certificate of analysis | Each lot's measured results, methods and limits, metals and micro included | Proves the released lot | Technical data sheet | Grade, profile, FFA, PV, moisture, pack and storage | Turns the specification into a working document | Agreed specification | The limits this lot was accepted against | Lets two suppliers be compared | Source and allergen statement | Wheat origin, germ, process and the allergen position | Supports the Annex II and FALCPA review | Gluten or protein result | Method, limit of quantification and result, where a claim is made | Backs a gluten statement | GC chromatogram | Profile, column, standard and integration | Shows the oil's identity | Origin and trace record | Site, lot code and manufacture date | Recall and audit trail A certificate is persuasive only beside the specification, the source statement and the chromatogram; alone it proves little. ## Checklist before the first order - Specification version, CAS number and grade are named. - COA, TDS, SDS, allergen, GMO, origin and process statements are on file. - The wheat allergen assessment and the label wording are reviewed for the destination. - Any gluten claim has a validated result and the destination threshold behind it. - The contaminant results are converted to the finished-product dose. - Claims are reviewed against the register or the notification. - Source, process and pack are under change control. The wheat germ oil page sets out the catalog specification, the COA page shows how the lot is released, and the identity page covers the analytical evidence. The release file itself is described on the quality page; the methods index explains the tests. The flaxseed oil powder page shows the same file for another oil. ### 06 How we prove a wheat germ oil lot is wheat germ oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/wheat-germ-oil/identity/ Reviewed: 2026-11-19 A wheat germ oil lot is identified by its fatty-acid profile, read together with the sterol and tocopherol pattern and the oxidation state. Linoleic acid at 50–60% is necessary but not sufficient, because sunflower, safflower and other seed oils can also be high in linoleic. The palmitic share, the minor acids and the unsaponifiable fraction are what separate wheat germ oil from a blend. In one lineIdentity is the fatty-acid profile, the sterol and tocopherol pattern, the colour and the oxidation state agreeing with the declaration, not one linoleic figure. ## Four questions, four kinds of evidence A certificate can use the right name and still leave the material unproven. Each layer below answers a different question and needs its own evidence; an answer to the first alone tells you about the paperwork. Four questions behind a wheat germ oil identity claim | Layer | Question | Evidence | What it proves | Document | Are the grade and source named? | Name, CAS 8006-95-9, specification, lot | Paperwork only | Chromatography | Is the fatty-acid profile wheat germ oil? | GC-FID of fatty-acid methyl esters | The oil family and the declared acids | Composition | Is it diluted, oxidised or stripped? | FFA, PV, moisture, unsaponifiable, sterols | Consistency and condition | Provenance | Where did the germ and the process come from? | Site, press, grade and lot record | Traceability ## The profile ratio as a fingerprint The profile's ratios are a fingerprint. Wheat germ oil at the catalog ranges has a linoleic-to-palmitic ratio of roughly 2.5–4.0, because linoleic is 50–60% and palmitic is 15–20%. A high-linoleic sunflower oil at 60–70% linoleic and 5–7% palmitic sits near 9–14; a high-linoleic safflower oil at 70–80% linoleic sits higher still. The ratio is a screen, not a proof: a blend can be built to land inside it. Linoleic-to-palmitic ratio as a screening check | Oil | Linoleic | Palmitic | Ratio | Wheat germ oil, catalog | 50.0–60.0% | 15.0–20.0% | About 2.5–4.0 | Sunflower oil, high-linoleic, typical | 60–70% | 5–7% | About 9–14 | Safflower oil, high-linoleic, catalog | 70.0–80.0% | 5–7% | About 10–16 The ratios move with variety and crop year, and the ranges overlap at the edges. Read the ratio with the oleic share, the minor acids and the sterol and tocopherol pattern. A single linoleic figure of 55% is compatible with several oils; the full profile is not. ## What XRD cannot do An oil has no crystal lattice, so X-ray diffraction has nothing to match. A diffractogram of the oil is not an identity test, and a “match” reported for an oil should be read with suspicion. On the powder-on-carrier format, XRD is dominated by the carrier: native starch gives sharp reflections, an amorphous carrier a broad halo. It says something about the carrier, not about the oil. Infrared spectroscopy is a better screen, though still not an identity test. The spectrum shows the ester carbonyl and the cis double-bond bands, and oxidation adds a broad hydroxyl band from hydroperoxides. FTIR can therefore flag a grossly oxidised sample or confirm that the material is an oil; it cannot separate wheat germ oil from sunflower oil or measure linoleic acid. GC remains the identity method. ## What adulteration looks like Substitution routes for wheat germ oil and the test that shows each | Route | What moves | Test that shows it | Another high-linoleic oil | Linoleic holds, palmitic falls, ratio rises | Full GC profile and sterol pattern | Added free fatty acid | FFA rises without hydrolysis | FFA and partial glycerides | Oxidised oil | PV rises; colour and odour change | PV, FFA and sensory check | Added tocopherol | Tocopherol pattern shifts | Tocopherol profile | Refined oil sold as cold-pressed | Colour lighter; unsaponifiable lower | Colour, unsaponifiable and process record The quietest route is a refined oil sold as cold-pressed. The fatty-acid profile can be almost identical, and the difference sits in the colour, the odour, the unsaponifiable fraction and the process record. If the label names the process, the process evidence belongs in the file. ## How to write identity into the specification Write identity as a set of lines, not a single assay. - “Wheat germ oil (Triticum vulgare germ oil), CAS 8006-95-9; grade named.” - “Linoleic 50.0–60.0%, oleic 15.0–25.0%, palmitic 15.0–20.0% by GC-FID, on a stated basis.” - “Identification: full profile conforms to the reference; chromatogram attached.” - “Free fatty acid ≤0.50%; peroxide value ≤5.0 meq O₂/kg; moisture ≤0.1%.” - “Unsaponifiable matter, sterol and tocopherol profile where claimed.” - “Appearance range and wheat allergen statement.” - “Pack, storage condition and retest period.” ## Five questions to put to a supplier - May I have the full GC chromatogram for this lot, including the column, the standard and the integration? - What are the linoleic, oleic and palmitic figures, and the minor acids, on the same lot? - What unsaponifiable matter, sterol and tocopherol results do you have? - What were FFA and PV at release, and how has the lot been stored? - Was this lot cold-pressed or refined, and what wheat protein or gluten statement comes with it? A supplier who answers all five with numbers and documents has supplied an identity file. The wheat germ oil page holds the catalog specification, the grades page compares the process routes, and the COA page shows where each figure belongs. The methods index explains the tests, the quality page the release workflow, and the wheat germ versus sunflower comparison puts the ratio in context. The flaxseed oil powder page shows a second oil handled the same way. ### 01 What the COA for beta-carotene pure actually contains URL: https://nutrition.rainwoodbio.com/products/vitamins/beta-carotene-pure/coa/ Reviewed: 2026-11-20 A certificate for a beta-carotene pure lot reports appearance, UV/Vis identification and assay, loss on drying, the heavy-metal panel, microbiology and particle size. The catalog assay is ≥97.0% by UV/Vis, and the certificate has to state the solvent, the wavelength and the basis beside that figure. The limits below are the catalog specification; the batch COA is the evidence for a particular pack. In one lineA 97.0% beta-carotene figure is only meaningful with its basis: the UV/Vis method, the solvent and the loss on drying beside it decide what the percentage describes. ## The certificate as a test report A certificate can be audited only when each line carries four things: the parameter, the method, the release limit and the measured result. A row that reads “conforms” without a method asks the reader to accept a conclusion; here the identity row and the assay row answer separate questions. Identity asks whether the chromophore is beta-carotene; assay asks how much colouring matter the lot contains. A lot can pass the assay and still be a diluted crystal or an oxidised material, because UV/Vis is blind to those differences. Release tests and methods for beta-carotene pure | Parameter | Method | Release limit | Appearance | Visual | Red to orange-red crystalline powder | Identification | UV/Vis spectrum against a beta-carotene standard | Conforms | Assay | UV/Vis spectrophotometry | ≥97.0% beta-carotene | Loss on drying | Gravimetric | ≤0.5% | Lead (Pb) | ICP-MS | ≤3 mg/kg | Arsenic (As) | ICP-MS | ≤2 mg/kg | Cadmium (Cd) | ICP-MS | ≤1 mg/kg | Mercury (Hg) | ICP-MS | ≤0.1 mg/kg | Aerobic plate count (APC) | Plate count | ≤1,000 cfu/g | Yeast and mould | Plate count | ≤100 cfu/g | E. coli | Absence test | Absent | Salmonella | Absence test | Absent | Particle size | Sieve analysis | ≥95% through 80 mesh The 80 mesh line is part of the grade, not a packing preference: it is finer than the 40 mesh of the 10% dispersion, and a lot that fails it handles differently even at the right assay. ## What the 97.0% is a percentage of Beta-carotene is measured by UV/Vis at a dilution against a standard of assigned content. The result depends on the solvent, the wavelength and the standard, so all three belong in the method line. The absorption has fine structure across roughly 425–480 nm, and reading at the wrong maximum, or against a degraded standard, moves the number without changing the powder. The basis is the second half of the definition. A result “as supplied” includes moisture and residual solvent in the denominator; a result “on the dried basis” removes the moisture. The catalog allows loss on drying up to 0.5%, so the two bases differ by at most about half a percentage point: 97.0% as supplied with 0.5% moisture calculates to about 97.5% on the dried basis. That is a small correction, but the certificate still has to say which basis was used. UV/Vis measures total colouring matter that absorbs at the chosen wavelength. It does not separate all-trans beta-carotene from cis isomers, and it does not see a colourless oxidation product; the balance of the 100% is other carotenoids, cis forms, oxidation products, moisture and residual solvent. If the specification or the label depends on the isomer profile, the certificate needs an HPLC line beside the UV/Vis assay. The EU E160a(ii) purity criterion is not less than 96% total colouring matter; the catalog floor of 97.0% is close, but the method and basis must be compared before the two are read as one gate. ## Release limit and batch result The release limit is the boundary a beta-carotene lot must meet; the batch result is the figure the laboratory measured on that lot. The two belong side by side, each with its method named. A result column that repeats the specification range is not evidence. What the result column should contain | Parameter | Release limit | Result column | Assay | ≥97.0% | A measured percentage, with solvent, wavelength and basis | Identification | Conforms | The maxima, or the spectrum attached to the report | Loss on drying | ≤0.5% | A measured percentage | Heavy metals | Per element | A figure in mg/kg for each of lead, arsenic, cadmium and mercury | Microbiology | Counts and absence | The count plus the absence statement for the lot | Particle size | ≥95% through 80 mesh | The measured percentage through the sieve “Passes specification” is a conclusion the reader should reach from the numbers. Heavy metals need one figure per element, not a total that hides the high one; microbiology needs a count and an absence statement, because they answer different questions. ## What moves between lots Crystallisation, drying and milling move the assay, the colour, the moisture and the particle size. The crystallisation solvent and the drying profile also move the residual-solvent result; none of these is a change in the molecule. Colour is the least quantitative line and often the first sign of a difference. Red to orange-red covers a real window, and particle size alone shifts the shade: a finer powder looks lighter and more orange, a coarser one darker and redder. Oxidation and a cis-rich lot also dull the colour while the assay stays above the floor. Read trends rather than single points: an assay drifting toward 97.0%, loss on drying climbing toward 0.5%, a new peak in the HPLC profile or a particle-size result that only just passes. The lot code on the certificate should run through the pouch, the drum and the retained sample. ## When to use an outside laboratory An independent test is worth ordering for a new source, a first shipment into a regulated market, a disputed identity or a label that names all-trans beta-carotene. The panel should not simply repeat the certificate. Ask for UV/Vis identity and assay with a certified standard, an HPLC carotenoid and isomer profile, loss on drying, ICP-MS for the metal panel, microbiology and a residual-solvent screen. Add X-ray diffraction where the question is crystallinity rather than purity, and a solvent-residue method matched to the declared route. Ask for a detection limit with every screen: a “not detected” line without one describes the method, not the sample. Keep the chain of custody with the sample. The referee should receive the retained pack, the certificate and the agreed specification, and the report should name the lot. If a result is disputed, ask for the tests that distinguish the grade rather than a second run of the same assay. ## What to compare between suppliers Six lines make the comparison: the form and CAS number; the assay and its basis; the UV/Vis method and the spectrum; the isomer profile; loss on drying and particle size; and the residual-solvent statement. Two quotations that agree on 97% but differ on basis or isomer profile are not describing the same powder. The form line matters most for this product. A supplier who ships a 10% dispersion against an order for the pure crystal will meet a “beta-carotene” description and fail the assay, the carrier declaration and the dose. The catalog specification for this grade sits on the beta-carotene pure product page; the tests that separate it from a dispersion are on the identity page; the grade comparison is on the grades page; the analytical methods are described in the methods library; and the release workflow is on the quality page. ### 02 Beta-carotene pure and the dispersion grades: what changes URL: https://nutrition.rainwoodbio.com/products/vitamins/beta-carotene-pure/grades/ Reviewed: 2026-11-20 Beta-carotene is sold as a crystalline colouring matter and as diluted, encapsulated preparations. This product is the crystalline grade, specified at ≥97.0% by UV/Vis; the 10% cold-water-dispersible powder, the 1% powders and the oil dispersions are different specifications with a carrier, a different assay basis and a different label. The grade decides the mass on the scale, the way the pigment disperses and what the finished product declares. In one lineChoosing a beta-carotene grade is choosing a physical form: the crystal, the 10% dispersion and the 1% powder differ in carrier, assay basis and the mass that carries a dose. ## Why beta-carotene is sold in several grades The crystal is the carotenoid itself: a concentrated, fat-soluble pigment with no carrier. It is the right starting point when the formula already has an oil phase, as a softgel fill or an oil blend does, because the oil becomes the carrier and the crystal dissolves into it. It is also the grade whose assay is closest to a purity figure, which matters when the specification has to stand against a colouring-matter criterion. The diluted grades solve a different problem. Beta-carotene is intensely coloured, so a dose is a few milligrams, and a few milligrams of a light, dusty crystal is awkward to weigh and almost impossible to disperse in water. A spray-dried preparation divides the pigment into fine particles, protects it with a carrier and an antioxidant, and makes it wettable. The trade is that most of the powder is no longer the carotenoid. Both approaches are legitimate, and neither is a stronger version of the other. An order that names only “beta-carotene” has not chosen between them. ## The grades side by side Typical beta-carotene grades and what they are for | Grade | Beta-carotene | Carrier | Water | Typical use | Pure crystal (catalog) | ≥97.0% | None | Not dispersible | Softgels, oil blends | 10% CWD powder | 10.0–11.0% | Declared carrier plus antioxidant | Disperses | Capsules, sticks, beverages | 10% oil dispersion | About 10% | Vegetable oil | No | Softgel fill, oily foods | 1% CWD powder | About 1% | Carrier plus antioxidant | Disperses | Low-dose colour, dry mixes The percentages are the carotenoid content of the article, not its purity. The 10% and 1% rows are preparations; the 97% row is the colouring matter, and the 96% figure in the EU additive specification is written for that article. A preparation cannot meet a criterion written for the colouring matter, and the colouring matter cannot do the job of a dispersion. ## Colour, particle size and handling The catalog crystal is a red to orange-red powder with at least 95% passing 80 mesh. It is practically insoluble in water and soluble in fats and organic solvents, so it goes into an oil phase rather than an aqueous one. In a warm oil it dissolves with agitation; in a cold oil it may only suspend, and the mixing time belongs in the process instructions. An 80 mesh crystal is finer than the 40 mesh of the 10% dispersion, which changes both the colour and the behaviour in the plant. A finer powder looks lighter and more orange because it scatters more light; a coarser crystal looks darker and redder. The finer powder also dusts more, clings to equipment and stains surfaces, and it can carry static. Weighing and transfer should be enclosed where possible. Colour strength follows the carotenoid mass, not the powder mass. One gram of the crystal carries at least 970 mg of beta-carotene; one gram of the 10% powder carries 100–110 mg. That is roughly a nine- to ten-fold difference, before any difference in isomer profile or carrier colour is counted. ## Dose arithmetic when you change grade The arithmetic is simple and easy to get wrong. To deliver 10 mg of beta-carotene, the crystal at 97.0% needs 10 ÷ 0.97 = 10.3 mg. The 10% powder needs 91–100 mg, depending on whether the lot assays 11.0% or 10.0%. A 1% powder would need about 1 g. The same declared dose therefore means very different fill weights, and a formula switched without recalculating the mass will be out by a factor of about ten. Carrier mass becomes a fill-weight question in a capsule or tablet. A 10 mg dose taken from the 10% powder arrives with roughly 80–90 mg of carrier and antioxidant, and that bulk has to fit the fill weight and the excipient budget. The crystal adds almost nothing, which is why it fits a softgel whose oil already fills the shell. Overage is decided separately. Colour and assay fall during storage, and the allowance is set from stability data on the finished formula rather than from the release certificate. Any extra crystal changes the declared amount, so the overage and the label are reviewed as one decision. ## What to write into the specification - “Beta-carotene, crystalline, CAS 7235-40-7, C40H56, all-trans form.” - “Assay ≥97.0% beta-carotene by UV/Vis; state the solvent, wavelength and basis.” - “Identification by UV/Vis spectrum against a beta-carotene standard.” - “Loss on drying ≤0.5%; particle size ≥95% through 80 mesh.” - “Heavy metals and microbiology as listed; colour within the red to orange-red window.” - “Residual-solvent statement for the declared manufacturing route.” - “Destination market and intended use — colour or nutrient — confirmed before the order.” A specification that names the grade, the assay basis and the isomer expectation is a purchase specification. One that says only “beta-carotene crystal” leaves the supplier free to choose the solid form and the residual-solvent profile, and the first difference usually appears at the filling line. ## When another grade is the right choice The 10% cold-water-dispersible powder is the practical choice for capsules, stick packs, dry mixes and beverages where a uniform orange dispersion is wanted. It is the wrong choice for a clear oil, for a softgel fill that is already oily, or for a formula that cannot accept the carrier mass or an allergen the carrier may bring. The 1% powder is for colour work at a very low dose, where even the 10% material would be difficult to distribute evenly through a dry mix. The oil dispersion sits between the crystal and the powder: it is convenient for a softgel line that would rather pump a suspension than weigh a crystal, but it is not a water-dispersible article. A change in either direction is a new specification, a new dose calculation, a matrix stability check and a label review. The product hub carries the catalog specification; the 10% CWD product page covers the dispersion grade; the level-four comparison takes the assay basis and label question further; the vitamin A page covers the provitamin A conversion; the methods library describes the assay. ### 02.1 Beta-carotene pure vs 10% CWD: assay basis, carrier and label URL: https://nutrition.rainwoodbio.com/products/vitamins/beta-carotene-pure/grades/beta-carotene-pure-vs-10-cwd/ Reviewed: 2026-11-20 The pure crystal and the 10% cold-water-dispersible powder carry the same carotenoid at different concentrations and in different physical systems. The crystal is ≥97.0% by UV/Vis, has no carrier and does not disperse in water; the 10% powder is 10.0–11.0% with a declared carrier and antioxidant that make it wettable. The assay basis, the carrier and the label are what change when a formula switches. In one lineThe 10% powder is a preparation with a carrier, the pure crystal is the colouring matter: the assay basis, the mass on the scale and the label change with the grade. ## The two articles side by side Beta-carotene pure against the 10% CWD powder | Property | Pure crystal | 10% CWD powder | Beta-carotene content | ≥97.0% | 10.0–11.0% | Carrier | None | Declared carrier plus antioxidant | Water dispersion | Not dispersible | Disperses in cold water | Oil solubility | Soluble in fats and organic solvents | Not designed as an oil concentrate | Appearance | Red to orange-red crystalline powder | Orange-red to red powder | Particle size | ≥95% through 80 mesh | ≥95% through 40 mesh | Mass for 10 mg beta-carotene | 10.3 mg at 97.0% | 91–100 mg The table is a specification comparison, not a ranking. The crystal is the colouring matter itself; the powder is an engineered dispersion that makes a fat-soluble pigment behave in water. ## The assay basis: 97.0% and 10.0% mean different things The crystal figure is close to a purity statement: 97.0% of the article is beta-carotene by UV/Vis, the balance being cis isomers, oxidation products, moisture and residual solvent. The 10% figure is a content statement: 10–11 g of beta-carotene in every 100 g of preparation, the rest deliberately added carrier and antioxidant. The ratio between them is roughly nine to ten, not exactly ten, because the crystal assays at least 97.0% and the powder at 10.0–11.0%. A formulator who replaces 100 mg of powder with 10 mg of crystal has under-dosed by a few per cent; one who replaces it with 10.3 mg has matched the carotenoid mass. The basis has to match too. The crystal has loss on drying ≤0.5%, so as-supplied and dried results differ by at most about half a percentage point; the 10% powder allows ≤5.0%, so its two figures can differ by several points. Comparing 10% as supplied with 97% on the dried basis mixes two denominators before any weighing. ## The carrier is most of the powder In the 10% powder, roughly nine parts of the mass are carrier, antioxidant and moisture for every one part of beta-carotene. The carrier divides the pigment into fine particles, keeps them from clumping, lets the powder wet out in cold water and shields the pigment surface from oxygen. The antioxidant, often a tocopherol or ascorbyl palmitate, slows the oxidation that would otherwise fade the colour. Carriers are not interchangeable. Modified food starch, gum arabic, gelatin and alginate differ in allergen status, in whether they suit a vegetarian or halal specification, in film-forming behaviour and in how they release the carotenoid. A carrier change is a specification change, not a purchasing detail, and it can move the allergen statement and the label. The crystal has no carrier to declare, but it also has no protection built in. It needs an oil phase and an antioxidant in the finished formula; the absence of a carrier is an advantage only where the formulation already supplies both. In a softgel the oil is the carrier, and the crystal dissolves into it. ## Weighing, dust and dispersion The crystal is weighed in milligrams, and a light, dusty, static-prone powder is harder to handle at that scale than a free-flowing dispersion. An 80 mesh crystal is finer than the 40 mesh powder, so it dusts more, clings to the scoop and stains the bench. Enclosed weighing, grounded equipment and a designated colour area are practical controls; the dust is a strong colorant, not a toxicity statement. In oil the crystal goes in with heat and agitation, and the dissolution step belongs in the process instructions; in water it will not disperse, however long it is stirred. The 10% powder is the reverse: it wets out in cold water but is not an oil concentrate. Each grade has a matrix where it works; the failure elsewhere is physical before it is chemical. Both articles fade. The crystal has no carrier film, so its surface is immediately available to oxygen; the powder has a carrier and an antioxidant, but the carrier takes up moisture and the antioxidant is consumed. Neither grade belongs in an open container on a bench. ## What the label has to say On an EU label, colour use is declared as E160a(ii) in the ingredient list, for example “colour: beta-carotene” or “colour: E160a(ii)”. Nutrient use moves the declaration into the nutrition panel, where retinol equivalents apply and the conversion is 6:1. A 10% powder also brings its carrier into the ingredient list when the carrier remains in the finished food; the crystal adds no carrier. US rules split the same way: 21 CFR 73.95 for colour, the GRAS affirmation at 21 CFR 184.1245 for nutrient use. In a supplement, vitamin A from beta-carotene is declared in the Supplement Facts panel in mcg RAE, with an optional statement of the share of vitamin A it provides. One mcg RAE corresponds to 12 mcg of dietary beta-carotene, or 2 mcg of beta-carotene in oil from a supplement; a crystal that has not been dissolved in oil does not automatically qualify for the 2:1 figure. “Beta-carotene 10%” and “beta-carotene pure” are specifications, not label names. The label names beta-carotene and declares the preparation's carrier when one is present; a label that says only “10% beta-carotene” has described the concentrate, not the finished product. ## When to choose which Choose the pure crystal when the formulation is oil-based, when a softgel fill or an oil blend can carry the carotenoid, or when the carrier mass and the carrier's allergen status are unacceptable. It is also the grade whose assay is closest to the colouring-matter figure in the additive specification. The catalog form here is the crystal. Choose the 10% CWD powder for capsules, tablets, stick packs, dry mixes and beverages where a uniform orange dispersion in water is wanted and milligram-scale weighing is impractical. It is wrong for a clear oil, a softgel fill that is already oily, or a formula that cannot accept the carrier mass. A switch in either direction is a new project: a fresh specification, dose calculation, colour match, stability check and label review. Start with the crystal specification on the pure product page, then compare it with the 10% CWD specification. The grades page sets both in the wider range; the vitamin A page explains the nutrient conversion; the methods library documents the UV/Vis assay; and release practice is on the quality page. ### 03 Beta-carotene pure: oxidation, light and the pack URL: https://nutrition.rainwoodbio.com/products/vitamins/beta-carotene-pure/stability/ Reviewed: 2026-11-20 Beta-carotene pure is a crystalline polyene that fails by oxidation, and light and heat accelerate the loss. The sealed pack, a cool dry store and an antioxidant in the finished formula are what protect the colour and the assay; the crystal carries no carrier to shield the pigment, so every exposed surface is a reaction site. Shelf life is assigned from stability data for the exact pack and storage condition. In one lineBeta-carotene fails by oxidation: the crystal has no carrier to shield it, so light, heat and air decide how long the colour and the assay last. ## The powder: moisture, light and oxygen The catalog sets loss on drying at ≤0.5%, which is a release gate and not a storage allowance. The crystal holds little water, but it is not sealed against the air: an opened pouch exchanges moisture with the room, and a humid store can push the loss on drying up. The change is small beside a dispersion, yet the certificate is written against a tight limit, so the pack and the store still matter. Oxygen is the direct cause of fading. Beta-carotene is a long conjugated chain with many sites for oxidation, and the reaction bleaches the colour. In the pure grade there is no carrier film and no built-in antioxidant between the pigment and the air, so the surface of each crystal is available. A pouch with a large headspace and a loose fold offers more oxygen than a freshly sealed one, and a nitrogen blanket on the bulk pack is a reasonable thing to specify. Light is the third driver. Beta-carotene absorbs strongly in the visible range, and the same absorption that makes it a colour makes it vulnerable. The powder should stay in its opaque or foil pack, or in a light-resistant container that closes properly. Heat raises the rate of all three processes, so a hot loading bay or a sunny store is a real exposure even for a sealed pack. ## The solution: oil, emulsion and the softgel fill Dissolved in oil, beta-carotene is more mobile and more exposed than it is in a crystal. The oil carries dissolved oxygen, the mixing step adds air, and the fill hold adds time and temperature. A softgel fill therefore needs a low-peroxide oil, a controlled mixing and deaeration step, and an antioxidant system chosen for the oil phase. An emulsion adds a water interface and a second route for oxygen and metal ions. The carotenoid sits at the oil–water boundary, where oxidation and colour loss can be fast, and the emulsifier and pH decide how stable that boundary is. A clear beverage is the least forgiving format: light passes through the whole volume, and the colour has nowhere to hide. Water alone is not a solvent for this grade. A formulator who wants an aqueous system starts with a dispersion grade, not with the crystal, and the stability work then belongs to that preparation and that matrix. ## What drives degradation Factors that move beta-carotene pure during storage | Factor | What it does | Control | Oxygen | Oxidises the polyene chain; colour and assay fall | Sealed pack; low headspace; antioxidant in the formula | Light | Photodegradation; fading and isomerisation | Opaque or foil pack; dark store | Heat | Accelerates oxidation, isomerisation and colour loss | Cool store; controlled process temperature | Moisture | Raises loss on drying; dilutes the as-is assay | Sealed pouch; dry store; desiccant where needed | Metal ions | Catalyse oxidation, especially iron and copper | Avoid metal contact; compatible equipment | Acid and pH | Isomerisation and colour shift in a matrix | Validate the matrix pH; buffer if needed | Isomerisation | All-trans converts to cis forms; colour strength drops | Limit heat and light exposure through the process These factors are not independent. A warm, bright, humid store is worse than the sum of three separate effects, and an oil solution in clear glass combines light and dissolved oxygen with any heat in the process. The useful question is not “is beta-carotene stable?” but “stable in which pack, at which condition, for how long?” ## A stability protocol for the ingredient A protocol is only useful when it names the pack, the condition, the time points and the tests. Warehouse coverage comes from 25 °C/60% RH long-term and 30 °C/65% RH intermediate storage; 40 °C/75% RH stresses the pack. For this material a light-exposure arm is not optional, since a dark incubator cannot reproduce a shop window. Test assay, loss on drying, appearance and colour, UV/Vis identity, the isomer profile and microbiology at each point. Colour should be measured, not only described, so that a shift can be compared with the starting point. The report should show the individual results, not only a pass statement, and it should identify the pack and the lot family. Ask for the summary for the pack you will buy. A 1 kg pouch and a 25 kg drum have different headspace, different opening histories and different surface-to-volume ratios; the data belongs to the pack, not to the product name. ## The finished formula changes the answer A softgel combines the oil solution with a shell that can transfer moisture and oxygen. Check the fill assay and colour at release and again after storage, and check the shell for brittleness or blooming. An oil blend in a bottle has a headspace that grows as the bottle is used, so the in-use period belongs in the stability plan. A gummy or chew brings heat, water and an acidic pH, and the crystal must be emulsified before it can go in. A beverage adds light and a heat step to the same list. In both, the crystal's bulk data is a starting point; the matrix decides the rest. The formulator sets any overage, which is a label and stability decision and cannot compensate for a pack that admits oxygen. ## How the shelf life is set No single shelf-life figure is published for beta-carotene pure, because the pack and the storage condition define it. The retest period on the specification is supported by the stability file for that pack. A figure quoted without a pack, a condition and a test panel is a claim, not a shelf life. Once the retest period has passed, re-assay the retained sample before extending use. Extension by assumption is not acceptable, and a bulk figure does not carry over to a repacked container. Standard packs are listed on the product hub; the COA page covers release tests; the MOQ page covers pack and lead time; the methods library describes the assay; the quality page describes the release workflow. ### 04 Beta-carotene pure: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/vitamins/beta-carotene-pure/moq/ Reviewed: 2026-11-20 Beta-carotene pure is sold from 1 kg, packed in a 1 kg foil pouch, with a 25 kg fiber drum as the bulk unit. The standard pack ships in 1–7 days. To quote firmly, the supplier needs the form and CAS number, the assay basis, the pack and quantity, the destination and Incoterm, the document set and the intended use. In one lineThe 1 kg pouch is a traceable lot before it is a quantity: it can be sampled, tested and retained, and the 25 kg drum is the production unit. ## Why the minimum is 1 kg One kilogram of the crystal carries at least 970 g of beta-carotene. At a 10 mg dose that is a very large number of servings, so the first order is almost never limited by the carotenoid itself. The constraint is the trial, the retained sample and the analytical work that has to happen before a production order, and a 1 kg pack covers all three from one lot. The pack is also small enough to ship as a parcel and to keep in a dark cabinet without a pallet. The material tested, the material retained and the material used in the trial can then be the same lot, which is the point of a minimum: a traceable unit, not a gesture. Smaller quantities are usually split out of a larger lot and repacked. The split adds handling, detaches the material from its original pack identity and weakens traceability, while the chemistry stays the same. If a bench trial needs less, ask for the repack to be documented. ## Packs and formats Standard beta-carotene pure packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Light and moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Oil suspension | On request | Oil-based blending | A different format with its own specification The catalog form is a crystalline powder with at least 95% through 80 mesh. The oil suspension is a format change, not a packing choice: it changes the carrier, the assay basis and the handling, and it needs its own specification and stability data. Say so before the quotation if the process would rather pump a suspension than weigh a crystal. ## Lead time and dispatch The standard pack is quoted at 1–7 days from confirmation. Picking, document preparation and dispatch sit inside that window; transit, customs and the customer's own release do not. A custom pack or an oil suspension needs its own lead time, stated separately on the quotation. Ask for the dispatch date, not only the range. A 1 kg pouch usually moves as a parcel while the 25 kg drum travels on a pallet, and the Incoterm decides who books the freight and who clears entry. The COA and the rest of the lot documents should travel with the pack, not arrive after it. The crystal is light-sensitive, so the pack should stay closed and out of direct sun in transit and in the warehouse. ## What a quotation needs Six items make a quotation firm enough to compare: - Product and form. Beta-carotene pure, crystalline, CAS 7235-40-7, with the all-trans expectation stated. - Specification. Assay and basis, loss on drying, particle size, heavy metals, microbiology and the residual-solvent statement. - Quantity and pack. 1 kg pouch, 25 kg drum, or an oil suspension on request. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, specification, SDS, and any market-specific statement the importer needs. - Intended use and market. Colour or nutrient, supplement or food, and the market where it will be sold. A quotation that names only “beta-carotene” has left the grade and the carrier open. The same generic name covers a 97% crystal, a 10% dispersion and an oil suspension, and the label, the dose and the analytical panel change with the choice. We do not publish commercial terms on this page; they are stated on the quotation. ## The sample is a lot, not a demonstration The 1 kg pack is the qualification lot. Before scaling, test identity, assay, loss on drying, the isomer profile, particle size and microbiology, and retain a sample from the same pack. The lot code should agree across the sample, the certificate and the quotation; a sample that cannot be tied to a lot is a demonstration, not a qualification. Test the crystal in the intended matrix as well. A lot that dissolves cleanly in warm oil on the bench can still throw a haze or a sediment in a cold fill, and a colour match in a dish can shift after the softgel is dried. The methods library describes the UV/Vis assay and the supporting tests. For a bench quantity below the pack size, raise it before the order. A split is a repack with its own traceability, not the catalog pouch, and it should be documented. The bench sample and the production drum may come from different lots even when both meet the specification. ## Terms to settle before the first order The quotation carries the commercial terms, the Incoterm, the pack, the lead time and the documents. Put the quality terms alongside: the specification revision, the certificate per lot, the retained sample, the retest period, and change control for the source, the crystallisation solvent and the pack. A source or solvent change can alter the residual-solvent statement and the identity file, so it belongs under change control. Returns and replacements follow the quotation and the quality agreement. If a lot misses the agreed specification, the route is the retained sample and a joint re-test against the named method, not a photograph of the powder. Decide in advance who pays for the referee laboratory and which laboratory both sides accept. The product hub carries the catalog specification; the COA page lists the release tests; the compliance page covers the market files; the 10% CWD product page covers the dispersion grade; the MOQ glossary entry defines the term; the quality page describes the release file. ### 05 The regulatory file for beta-carotene pure URL: https://nutrition.rainwoodbio.com/products/vitamins/beta-carotene-pure/compliance/ Reviewed: 2026-11-20 A single beta-carotene lot can enter a market on two different legal routes. If it colours the product, the additive rules apply; if it supplies vitamin A, the nutrient rules apply, and some products use both. The EU colour entry is E160a(ii) in Regulation (EC) No 1333/2008, with purity criteria in Regulation (EU) No 231/2012; in the US, colour use falls under 21 CFR 73.95 and nutrient use under the GRAS affirmation at 21 CFR 184.1245. The buyer's team records the route before the label is set. In one lineA beta-carotene specification is only half the file: the route, the limit and the label depend on the market, the use and the finished dose. ## What the file contains A complete file answers four questions: what the material is and which specification version is bought; which lot is released and what its certificate reports; which route and label rules apply to the finished product; and what changes if the source, solvent or pack changes. The certificate, data sheet and safety data sheet answer different questions; none answers the route alone. The route has two branches. Used for colour, the material is a food additive and the additive entry, purity criteria and colour declaration apply. Used for vitamin A, it is a nutrient and the nutrition labelling and supplement rules apply. The same crystal can sit on either branch; the use decides, not the product name. ## European Union Beta-carotene is the colour E160a(ii) in Regulation (EC) No 1333/2008, which sets food categories and maximum levels; the buyer's team confirms the category and level for the finished product. The purity criteria sit in Regulation (EU) No 231/2012: not less than 96% total colouring matter as beta-carotene, read at the specified absorbance maximum, with the purity limits of that entry. The 96% criterion is written for the colouring matter, the article this grade supplies. The catalog floor of 97.0% sits above it, but the comparison holds only when the method and basis are the same; the buyer confirms that before reading the certificate against the additive specification. For a food supplement, Directive 2002/46/EC and national rules apply alongside the additive rules. EU labelling sits in Regulation (EU) No 1169/2011. If the finished label presents beta-carotene as vitamin A, the declaration is in retinol equivalents, and the conversion is 6 µg of all-trans beta-carotene to 1 µg RE. The calculation uses the carotenoid content of the dose, never the weight of the crystal. Check the consolidated text and claims register at the time of review. ## United States The colour additive regulation for beta-carotene is 21 CFR 73.95: permitted for colouring foods generally, in amounts consistent with good manufacturing practice, with batches exempt from certification. The nutrient route is the GRAS affirmation at 21 CFR 184.1245, which covers beta-carotene as a nutrient supplement under the conditions stated there. DSHEA labelling and cGMP rules also apply to a US dietary supplement. Vitamin A from beta-carotene is declared in the Supplement Facts panel in mcg RAE, and the panel may state how much of the vitamin A comes from beta-carotene. The conversion is 12 mcg of dietary beta-carotene per mcg RAE, or 2 mcg when the beta-carotene is in oil in a supplement. The matrix matters: a dry crystal does not automatically take the 2:1 figure. The buyer's regulatory team confirms both the conversion and the route. Colour use and nutrient use produce different labels. Beta-carotene added purely for colour need not be declared as vitamin A; one presented as vitamin A must satisfy the nutrient rules. The supplier's certificate does not make that choice for the brand. ## Contaminants and purity limits The limits below are the catalog specification for this grade, not the finished-product limit; that calculation is the buyer's. The EU additive specification also sets residual-solvent limits, which belong in the file when the crystal is sold as a colour. Release limits for beta-carotene pure and what the file should show | Parameter | Catalog limit | What the file should show | Assay | ≥97.0% by UV/Vis | Measured result, with solvent, wavelength and basis | Loss on drying | ≤0.5% | Measured percentage for the lot | Lead, arsenic, cadmium, mercury | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | A measured figure per element, plus the finished-product calculation | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | The count and the absence statement for the lot | Particle size | ≥95% through 80 mesh | The measured percentage through the sieve | Residual solvents | Per the declared route and destination specification | The solvent list, the limits and the lot result The 97.0% assay and the 96% purity criterion are not automatically the same gate. They may agree once method and basis are aligned, but the specification must say which article and basis it describes; a number without that context cannot be checked against a legal text. ## Claims and label language No disease-related claim is made for beta-carotene on this site. EU health claims need authorisation under Regulation (EC) No 1924/2006 and a place in the EU register; a vitamin A claim also depends on the daily portion reaching the nutrient threshold for “source” or “high”. In the US, a structure/function statement must be truthful and not misleading, and a supplement that carries one needs the DSHEA disclaimer. Wording is checked by the brand's reviewer for the product and market. A certificate and a label are different instruments. The certificate supports the material, the label speaks for the finished product, and neither approves the other. When the label declares vitamin A, the destination conversion applies to the carotenoid mass, not the powder weight. ## Documents in the file - Specification with the grade, CAS number, isomer expectation and assay basis. - Batch COA with the UV/Vis result, identity spectrum, contaminants, microbiology and particle size. - Technical data sheet and safety data sheet. - Allergen, GMO and origin statements; natural versus synthetic origin if the label uses that word. - Residual-solvent results for the declared manufacturing route. - Vitamin A calculation for the finished product, if the nutrient route is used. - Change-control record for the source, solvent and pack. Name any missing lot statement before the order, not at the port. A versioned document list beats a folder of undated PDFs. The product hub carries the catalog specification; the identity page covers the analytical evidence; the vitamin A page covers the nutrient side; the EU regulatory notes collect the framework references; the quality page describes the release file. ## Checklist before the first order - The grade, CAS number, isomer expectation and assay basis are named in the specification. - The intended use — colour or nutrient — and the destination market are written on the order. - The COA, TDS, SDS, allergen, GMO, origin and solvent statements are on file. - The contaminant results are converted to the finished-product dose. - The label and the claim have been reviewed for the destination, including the vitamin A conversion. - The source, solvent and pack are under change control. The 10% CWD product page shows how the dispersion grade differs; the COA page explains the lot certificate; the methods library describes the tests behind the file. ### 06 How we prove a beta-carotene pure lot is the crystal URL: https://nutrition.rainwoodbio.com/products/vitamins/beta-carotene-pure/identity/ Reviewed: 2026-11-20 A beta-carotene pure lot is the named material when four lines agree: the document names beta-carotene and CAS 7235-40-7, the UV/Vis spectrum matches a beta-carotene standard, the HPLC profile is consistent with all-trans beta-carotene, and the mass balance closes with the assay and loss on drying. The crystal also has to show that it is crystalline, not a spray-dried dispersion. A single 97.0% figure does not prove the grade. In one lineA 97.0% assay does not identify the grade: the spectrum, the isomer profile, the crystal form and the mass balance each answer a different part of the question. ## The identity layers A named material on a certificate is a claim until the measurements behind it agree. Each layer below answers a different question and needs its own evidence; a supplier who answers only the first has described paperwork, not powder. Layers of beta-carotene pure identity | Layer | Question | Test | What it proves | Document | Is the form and CAS named? | Specification, COA, label | Paperwork only | Spectrum | Is the chromophore beta-carotene? | UV/Vis maxima and absorbance ratios | The carotenoid, not the grade | Isomer profile | Is it all-trans? | HPLC with UV detection | The isomeric composition | Mass balance | Is it diluted or oxidised? | Assay, loss on drying, impurities | Consistency of the numbers | Solid state | Is it crystalline? | X-ray diffraction | The physical form | Behaviour | Does it act like the crystal? | Solubility in oil and water | The grade in practice The spectrum and the isomer profile are often confused because both are reported at the same wavelength. The spectrum shows the shape of the absorption and the position of the maxima; the HPLC profile separates the all-trans peak from the cis peaks. A lot can have a textbook spectrum and a poor isomer profile, or the reverse. ## The ratios that identify the grade Two ratios matter on the identity file. The first is the concentration ratio between this grade and the 10% dispersion: the crystal carries at least 970 mg of beta-carotene per gram, the 10% powder carries 100–110 mg per gram, so the same dose mass differs by roughly nine to ten times. That ratio is a grade check, not a purity check. A lot whose assay sits at 10% is not a 97% crystal that reads low; it is a different article with a carrier. The second is the absorbance ratio at the spectrum's maxima. The absolute absorbance gives the assay, and the ratio of absorbances at two maxima gives the shape of the curve. That shape is compared with the standard, and a shift points to a different carotenoid, a degraded standard or a cis-rich lot even when the assay still reads 97.0%. The mass balance is the third ratio: assay plus loss on drying plus the measured impurities should approach 100%. A 97.0% result with 0.5% moisture leaves about 2.5% for cis isomers, other carotenoids and oxidation products, which is the expected balance for this grade. A larger gap suggests dilution or an unmeasured residue; a gap that is too small suggests the assay is reading something other than beta-carotene. ## X-ray diffraction and the solid state X-ray diffraction answers the question the assay cannot: is the solid crystalline, and does its pattern match a reference for this grade? The 10% cold-water-dispersible powder is a spray-dried preparation in which the carotenoid is dispersed in a carrier, and it does not give the pattern of the pure crystal. A lot sold as the crystal that shows an amorphous halo has been diluted or processed into a dispersion. Beta-carotene can crystallise in more than one solid form, so the pattern should be compared with a reference for the grade and the manufacturing route, not with a generic library entry. XRD is not a purity assay and it does not measure the isomer content. Ask for the reference pattern and the detection limit before reading a “match” statement. For a disputed lot, XRD plus HPLC/UV plus the mass balance is stronger than any one of them. XRD is not a routine release test for this product, and a certificate that reports only “XRD conforms” without the pattern has added little. ## What adulteration looks like Common beta-carotene pure substitutions and the signals | Adulterant | What it does | Signal | Test | Carrier dilution | Lowers assay; adds water and ash | Assay below 97.0%; loss on drying up | Assay, loss on drying, mass balance | Other carotenoid | Similar colour, different spectrum | Maxima shift; ratio changes | UV/Vis, HPLC, mass spectrometry | Dye | Matches colour, not the absorption curve | Colour without a spectrum match | UV/Vis spectrum, HPLC | Cis-rich or oxidised lot | Dull colour; lower colour strength | Cis peaks; changed ratio | HPLC isomer profile, UV/Vis | Wrong grade | 10% dispersion sold as crystal | Water dispersion; carrier present | Dispersion test, XRD, loss on drying | Moisture | Raises loss on drying; lowers the as-is assay | LOD above 0.5% | Loss on drying Colour is the weakest signal. Red to orange-red covers a wide range, and a dye can reproduce it. The stronger signals are the spectrum, the isomer profile and the crystal form. A certificate that reports appearance and assay but not identity has left the most likely substitution untested. Analytically, natural and synthetic beta-carotene are the same molecule. Origin is a documentary question — source, route and audit — and no assay separates the two. A “natural” claim without a source statement is label language, not an identity result. ## How to write identity into the specification - “Beta-carotene, crystalline, all-trans, CAS 7235-40-7, C40H56.” - “Assay ≥97.0% beta-carotene by UV/Vis; state the solvent, wavelength and basis.” - “Identification by UV/Vis spectrum against a beta-carotene standard; report the maxima and the absorbance ratio.” - “HPLC carotenoid profile; report the all-trans and cis content, with a limit where the colour function requires it.” - “Loss on drying ≤0.5%; particle size ≥95% through 80 mesh.” - “X-ray diffraction pattern consistent with the crystalline reference, where solid form is specified.” - “Origin statement where the label uses natural or synthetic.” An identity specification that names the isomer profile and the solid form is a purchase specification. One that says only “beta-carotene 97%” leaves the grade and the origin open, and the first difference usually shows up in the colour or the label. ## Five questions for the supplier - Which grade is this lot, and which CAS number is on the certificate? - Can you provide the UV/Vis spectrum and the absorbance maxima, not only the assay percentage? - What is the HPLC carotenoid profile, and what is the all-trans to cis ratio for this lot? - What is the loss on drying, and does the crystal give the reference X-ray pattern? - If the lot is disputed, will you accept a joint re-test on the retained sample? Five answers of this kind build an identity file; a single percentage does not. The catalog specification sits on the product hub. The COA page locates each figure on the certificate, the grades page compares the forms, the level-four comparison follows the label consequences, the methods library explains the UV/Vis and HPLC work, and the quality page covers release. ### 01 What the COA for chicken collagen peptides actually contains URL: https://nutrition.rainwoodbio.com/products/protein-collagen/chicken-collagen-peptides/coa/ Reviewed: 2026-11-20 A chicken collagen COA is a release record for a hydrolysate, and it is complete only when the nitrogen factor, the SEC method, the moisture and ash balance, and the chicken species and tissue sit together. The ranges below are the catalogue specification; the certificate reports the lot. Percentages without those anchors cannot be compared across suppliers. In one lineA chicken collagen certificate is readable only when the protein factor, the peptide distribution and the chicken source are stated together with their methods. ## Reading the sheet as a chain of evidence Read the sheet as a chain. Appearance shows what the dryer produced; protein shows the nitrogen once the factor is known; the two SEC lines show how the protein is cut; moisture and ash account for the non-protein mass; the metal and micro panels cover safety. Each row needs a method and a limit as well as a number, or the reader has a conclusion rather than a measurement. Release parameters and methods · chicken collagen peptides, catalogue specification | Parameter | Release limit | Method | Appearance | Off-white to pale yellow powder | Visual | Protein | ≥90.0%, dry basis | Kjeldahl, N × 5.55 | Peptide content | ≥80.0% | SEC-HPLC | Molecular weight | ≥80% below 3,000 Da | SEC-HPLC | Loss on drying | ≤7.0% | Gravimetric | Ash | ≤5.0% | Gravimetric, furnace | Heavy metals | Pb ≤3; As ≤2; Cd ≤1; Hg ≤0.1 mg/kg | ICP-MS | Microbiology | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent | Plate count and absence tests | Particle size | ≥95% through 80 mesh | Sieve analysis Two items belong in the file even though they are not in the table. The first is the source line: the catalogue does not fix a tissue, and skin, feet and bone each bring their own fat, mineral and odour profile. The second is hydroxyproline, the amino acid that marks collagen; with no catalogue limit, it is a supplementary test rather than a release line. Add pH only if the matrix needs it. ## The factor, the moisture and the peptide basis Kjeldahl gives a nitrogen figure. Turning it into protein needs a factor, and collagen uses 5.55 because the protein carries roughly 18% nitrogen; a general food protein uses 6.25, assuming 16%. Applied to the same digest, 6.25 lifts a 90.0% collagen result to about 101%. The powder has not changed; the arithmetic has. Print the factor beside the figure it produced. Moisture is the second half of the basis. The catalogue protein limit is on a dry basis. At 7.0% loss on drying and 90.0% protein on the dry basis, the powder as weighed carries about 83.7% protein. That as-is number is what the balance uses. A certificate that omits the basis leaves the reader to guess, and a several-point error can follow. The SEC lines have their own basis. Peptide content and the molecular-weight distribution are not the Kjeldahl percentage, and they should not be added to it or subtracted from it. One line describes how much material the column recovers as peptide; the other describes where that peptide sits by size. Ask for both, with the fraction bins, so the cut-off is visible. ## Limit, result and the gap between them The limit is the gate; the result is the measurement. A certificate that fills the result column with the specification has published the gate twice. Keep them apart, with the method beside the result. What a lot result should look like on the certificate | Parameter | Specification | Evidence expected | Protein | ≥90.0% dry basis | Measured percentage; factor and moisture basis stated | Peptide content | ≥80.0% | Measured value; SEC method named | Molecular weight | ≥80% below 3,000 Da | Fraction table or chromatogram, not only the gate | Loss on drying | ≤7.0% | Measured percentage | Ash | ≤5.0% | Measured percentage | Heavy metals | Per element | Result in mg/kg for each element separately A pass can hide a difference on the molecular-weight line. A lot that clears 80% below 3,000 Da with a heavy shoulder just above the line wets out and dissolves differently from a lot with a clean cut, though both pass. The distribution, not the pass mark, predicts behaviour in a stick pack or a drink. ## Where lot-to-lot variation enters Variation starts before the reactor. Skin, feet and bone differ in fat, mineral and collagen density, and a plant running more than one stream will produce lots that differ in ash and colour under the same recipe. Raw material held longer before processing develops a different odour that no protein figure captures. Inside the reactor, enzyme dose, temperature and time set the chain length. Downstream, filtration decides how much fine fraction survives, and the dryer fixes moisture, mesh and part of the colour. A dryer change can move particle size and bulk density while protein stays flat, so the specification should cover the physical lines too. Odour belongs in the receiving record. The powder has a mild note by nature; a stronger or different note can follow residual fat, a longer hold or a wetter raw material. A lot can pass every number and still smell unlike the previous drum, and the retained sample is the only fair comparison. The lot code should link certificate, pack and sample. ## When to use an outside laboratory Four situations justify an outside test: a source you have not run, a first commercial shipment into a regulated market, a label that names the species without evidence, and any result you cannot reconcile with the retain. The panel should answer the open question, not repeat the release sheet. A species question needs a species method or raw-tissue PCR; a collagen question needs hydroxyproline and the amino acid profile; a size question needs SEC with the fraction bins. Ask for the method’s detection limit alongside any “none detected” statement; without it, the reader knows the method found nothing at its own sensitivity, not that the sample contains nothing. Keep the sample chain tight: the material tested should be the retained sample, and the report should name the lot. For a dispute, send certificate, specification and retain to the referee and ask for the test that separates the explanations. ## Six lines for a supplier comparison A comparison should show species and tissue; protein with factor and basis; peptide content and the SEC distribution; moisture, ash and mesh; the metal and micro results; and the allergen, origin and species statements. Two quotations can match on protein and differ on the other five, in which case they describe different powders. The catalogue ranges are on the chicken collagen peptides product page. The tests that separate chicken collagen from another collagen are on the identity page; the market file is on the compliance page; the chromatographic and Kjeldahl methods are described in the methods notes; and the release file is described on the quality page. ### 02 Choosing a chicken collagen peptide grade: source, tissue and peptide curve URL: https://nutrition.rainwoodbio.com/products/protein-collagen/chicken-collagen-peptides/grades/ Reviewed: 2026-11-20 Chicken collagen peptides are a hydrolysed type I material, and this catalogue carries one powder grade at ≥90% protein with ≥80% of the peptide below 3,000 Da. The choices that change a purchase are the chicken tissue behind the lot, how far the collagen is hydrolysed, and whether the powder stays at 80 mesh or is granulated. Those choices move the label, the solution behaviour and the capsule fill before they move the certificate. In one lineThe chicken source is only the first line of the grade; the tissue, the peptide distribution and the physical form decide what the powder does in the formula. ## Why one species covers several materials “Chicken collagen” names the species and stops there. Type I collagen can be taken from skin, feet or bone; type II comes from sternum cartilage; gelatin is collagen that has been cooked but not cut into peptides. The three are sold under different names, carry different specifications and behave differently in a formula, even though all three begin with the same animal. This catalogue supplies the type I hydrolysate. It does not fix the tissue, so a buyer who needs chicken skin, chicken feet or chicken bone should write that line into the specification; the certificate can then be checked against the label and the raw-material record. The grade question is therefore not a purity ladder. The protein floor is the same; the tissue, the peptide curve and the physical form are what vary. ## The three materials side by side Chicken collagen materials that are not interchangeable | Material | Collagen type | Hydrolysis | Protein basis | Behaviour in water | Label name | Hydrolysed chicken collagen peptides | Type I | Controlled enzymatic | Kjeldahl, N × 5.55 | Dissolves; clear to slightly opalescent | Chicken collagen peptides | Chicken gelatin | Type I | Thermal denaturation only | Kjeldahl, N × 5.55 | Gels on cooling | Chicken gelatin | Chicken sternum type II collagen | Type II | None; native helix retained | Different basis; standardised by ELISA | Disperses; not a clear solution | Chicken cartilage collagen The last row is the one most often confused with this product. The type II material is standardised by an ELISA for the native epitope and uses a different protein basis, because it is a cartilage matrix rather than a purified hydrolysate. It is not a substitute for chicken collagen peptides, and the reverse is also true. ## What the powder is like in the drum The standard form is an 80 mesh powder: ≥95% through 80 mesh. Mesh governs flow, dust and wetting. A finer powder disperses quickly but throws dust; a coarser one flows better and dissolves more slowly. Bulk density is not on the catalogue sheet, so agree it if the capsule fill or the stick weight depends on it. Colour is off-white to pale yellow and moves with the raw material and the dryer. Odour is mild; a stronger note is a raw-material and storage question rather than a grade marker. The powder is hygroscopic, so the pack and the opening history belong to the grade decision in practice. Granulation is available on request. It changes the particle size, the flow and the dust, not the chemistry; the protein, peptide and molecular-weight lines stay the same. Ask for it before the quotation, because it is a different specification line and can change the lead time. ## What changes in the finished product In a capsule or tablet, the fill weight and the flow decide. At the 90% protein floor and the 7.0% moisture limit, a 500 mg fill carries about 419 mg protein and a 5 g stick about 4.19 g. Those are arithmetic on the protein line, not a recommended intake. Ash counts toward the fill, and a granulated powder can close a tablet that a fine powder will not. In a stick pack or drink mix, the powder dissolves and the solution is clear to slightly opalescent. The peptide distribution matters more than the mesh: a lot at the top of the 3,000 Da window can haze at low pH or on chilling. Trial the lot that will ship, at the concentration the label will use. In a gummy or a chew, the hygroscopic powder competes with the base for water. The grade question becomes a water-activity question, and the granulated form is usually easier to handle. ## What to write into the specification - “Hydrolysed chicken collagen peptides, type I; species chicken, tissue named.” - “Protein ≥90.0% on a dry basis by Kjeldahl with N × 5.55; factor and basis printed on the COA.” - “Peptide content ≥80.0% by SEC-HPLC; ≥80% of the peptide below 3,000 Da; distribution reported.” - “Loss on drying ≤7.0%; ash ≤5.0%; ≥95% through 80 mesh.” - “Heavy metals and microbiology as listed on the catalogue sheet.” - “Chicken species declaration, tissue, country of origin and allergen statement.” - “Granulated form, if needed, with the particle-size and bulk-density targets agreed.” The tissue line is the one most often left out. Without it, two certificates can both say “chicken collagen peptides” and describe different raw materials. ## When a different material is the right purchase If the formula needs a gel, gelatin is the material, not a peptide. If the label names the native type II structure, the sternum product is the purchase. If the label names bovine or fish collagen, a chicken lot is not a like-for-like switch even at the same protein figure; the species word changes the label and the file. If a clear drink at low pH is the target, a bench trial comes before a source change. The source comparison with bovine collagen is on the chicken versus bovine page, and the fish alternative is described on the fish collagen peptides page. The catalogue ranges are on the product page, the analytical lines are on the COA page, and the release process is described on the quality page. ### 02.1 Chicken collagen vs bovine collagen: two sources, two label positions URL: https://nutrition.rainwoodbio.com/products/protein-collagen/chicken-collagen-peptides/grades/chicken-collagen-vs-bovine-collagen/ Reviewed: 2026-11-20 Chicken and bovine collagen peptides are both type I hydrolysates, and at the same protein and peptide limits the two certificates look alike. The difference that reaches the label is the species word and the file behind it: bovine material is documented with a TSE declaration, chicken material with a poultry species and origin declaration, and neither source is on the major allergen lists. The species claim is a documentation question, not a protein figure. In one lineChicken and bovine collagen peptides are analytically close; the species word and the file behind it are what separate them on the label. ## Two species, one collagen family Both materials are type I collagen, the fibrillar collagen of skin, tendon and bone. The chicken version is typically taken from skin, feet or bone; the bovine version from hide or bone, with tendon as another route. In both cases the raw material is cleaned, hydrolysed and spray-dried, and the resulting powder is a mixture of short peptides rather than intact collagen. The chemistry is shared because the function is shared. Type I collagen is built from a triple helix with glycine in every third position and hydroxyproline through the chain, and that architecture is conserved across species. The CAS number is shared as well: 9007-34-5 is the generic collagen number and names the class, not the animal. A specification that stops at the CAS line has not chosen a species. What is not shared is the tissue supply chain and the documentation that follows it. Chicken raw material and bovine raw material come from different slaughter and processing streams, carry different records and meet different regulatory expectations at the border. Those differences are the subject of the rest of this page. ## Why the certificates look alike At the same protein floor and the same peptide target, the two certificates can be almost interchangeable. Both use Kjeldahl with the 5.55 factor for collagen, both can meet ≥80% below 3,000 Da, and both report hydroxyproline as the collagen marker. A buyer comparing two sheets line by line may find no number that separates them. Chicken and bovine collagen peptides · the comparison that matters | Point | Chicken | Bovine | Typical tissue | Skin, feet, bone | Hide, bone | Collagen type | Type I | Type I | Protein factor | Kjeldahl, N × 5.55 | Kjeldahl, N × 5.55 | Peptide target | ≥80% below 3,000 Da | Can be cut to the same target | Species test | Chicken-specific PCR on raw tissue or a validated method | Bovine-specific PCR on raw tissue or a validated method | TSE file | Poultry is outside the TSE species scope | TSE declaration required | Major allergen list | Not listed | Not listed | Label name | Chicken collagen peptides | Bovine collagen peptides The species is the line the routine certificate cannot settle. Protein, hydroxyproline and the peptide curve describe collagen, not the animal, and a bovine hydrolysate can be cut to the same distribution as a chicken one. Only a species-specific method, or a documented and audited chain, closes the question. That is why the source declaration belongs on the specification and not only in the email. ## Two label positions The first position is the ingredient name. A species-specific product should name the species: “chicken collagen peptides” and “bovine collagen peptides” are different ingredients, and “collagen peptides” alone leaves the buyer to guess. The name on the finished label has to match the source document and the COA, because the species is part of what the product is, not a marketing adjective. The second position is the statement that sits beside the name. Bovine material is expected to carry a TSE declaration covering species, tissue, origin, site and processing controls. Chicken material is expected to carry a poultry species and origin statement instead; poultry sits outside the species scope of the TSE Regulation, so a bovine-style attestation is not the document the chicken file needs. Each source has its own paper, and one does not cover the other. Neither source is on the EU major-allergen list or the US major food allergen list, so the species itself does not trigger a “contains” statement. The ingredient name still names the animal, and a customer with a religious or cultural restriction will read that name. Halal and kosher certificates, when required, are issued for the site and the process; they sit on top of the species declaration, not instead of it. ## The file behind each source The bovine file is built around the TSE Regulation (EC) No 999/2001 and the supplier declaration that follows it, plus the species, tissue and origin record from the slaughter and processing site. The chicken file does not need that declaration, but it does need a chicken species statement, the tissue, the country of origin and a site certificate under a recognised food-safety scheme. Both files need the same analytical core: specification, COA with the protein factor and basis, peptide and molecular-weight data, moisture, ash, metals, microbiology and mesh. Both need a TDS and an SDS. The difference is the source layer, and that layer is what the label reviewer and the border inspector read first. ## What changes when you switch A switch from one species to the other is a specification change, not a like-for-like substitution. The ingredient name changes, the source declaration changes, the COA is reissued against the new material, and the allergen and religious-use statements are reviewed again. If the finished label names the species, the artwork changes too. The powder also has to be re-trialled. Colour and odour differ between species and between tissues, and a formula that masks a bovine note may not mask a chicken one. Solubility and haze can differ at the same peptide cut-off, because the raw material and the hydrolysis route are not identical. The dry stability is similar, but the matrix trial belongs to the new lot. None of this is a reason to avoid a switch. It is a reason to plan it as a project rather than as a purchase-order amendment, with a new specification, a label check and a bench trial before the first production run. ## When each source fits Choose chicken when the label, the customer or the market calls for a poultry source, and when the chicken species and origin file can be issued for the lot. Choose bovine when the label already names bovine collagen, when the formula has been qualified on it, or when the customer expects the conventional source. Neither choice is a quality ranking; the protein and peptide limits can be met on either side. Fish collagen is a third source with its own allergen declaration and a lower hydroxyproline profile, and it is described on the fish collagen peptides page. The wider collagen range is on the collagen peptides page, and this product’s catalogue is on the chicken collagen peptides page. The analytical methods are in the methods notes, and the quality page describes the release process. ### 03 Chicken collagen peptides are stable dry; moisture, heat and the matrix decide the rest URL: https://nutrition.rainwoodbio.com/products/protein-collagen/chicken-collagen-peptides/stability/ Reviewed: 2026-11-20 A sealed pouch of chicken collagen peptides holds its specification for as long as the pack keeps moisture out. The peptide is not the fragile part: caking, colour drift, odour and, in a flavoured mix, browning appear before any change in the protein figure. Once the powder is dissolved, heat and pH take over, and the shelf life has to be measured in that matrix. In one lineThe dry powder is the stable format; moisture, heat and the finished matrix are what shorten the shelf life. ## The powder: water is the first variable The release limit is 7.0% loss on drying, and that number describes the powder at the factory gate. An opened pouch keeps exchanging water with the room. The peptide is hygroscopic; the water it takes up cakes the particles, raises the loss on drying and dilutes the as-is protein figure. The dry-basis figure may stay where it was while the powder in the scoop changes. The foil pouch is the barrier, and the seal is the weak point. Folding the top over is not the same as a heat seal, and the headspace has already exchanged air by the time the fold is made. For a long storage period, move the remainder into a smaller opaque container, or use it within the in-use period agreed with the supplier. A desiccant helps in a humid room; it does not close a gap in the seal. Colour and odour change before the release numbers do. Off-white to pale yellow is a broad window, and a darker or duller powder inside that window can still be within specification. The mild odour can strengthen with moisture and warmth. Both are worth writing down at receipt, because the retained sample from the same lot is the only fair comparison later. ## In solution, heat and pH take over The powder dissolves to a clear to slightly opalescent solution. In water the risks change: heat, pH, oxygen and metal ions now have direct access to the peptide. A hot fill or a pasteurisation step is a heat load the powder never sees in the pouch. A stick pack avoids that load because the consumer adds water at the point of use, which is one reason the powder format is easier to keep stable. Haze is the usual visible failure. It can come from the fraction above the 3,000 Da cut-off, from a pH near the isoelectric region, or from minerals carried in from the raw material. A lot that only just clears the molecular-weight gate can haze where a cleaner cut stays clear. The trial has to use the lot that will ship, at the target concentration and pH, because a typical curve from a brochure will not predict the drum. If a liquid is the only option, control the pH, keep dissolved oxygen low and validate the hold time before filling. Bulk data does not predict a beverage. The recipe, the heat treatment and the container all alter the rate, so the drink has to be tested as a drink. ## What drives the change Storage and matrix factors · chicken collagen peptides | Factor | Effect on the material | What to do | Water | Caking, higher loss on drying, lower as-is protein | Keep the pouch sealed; transfer the remainder | Heat | Faster colour and odour change; faster moisture damage | Ambient, dry store; cool the process | Reducing sugars | Browning in a flavoured powder or a syrup | Review the flavour system; control water activity | pH | Haze and a change in solubility near the isoelectric region | Test the matrix pH; buffer if the formula allows | Oxygen and light | Slow colour and odour drift | Opaque pack; low headspace | Iron and copper | Colour and haze in solution | Avoid metal contact in the process These factors combine. A warm, damp store is worse than either condition alone, and a flavoured sachet with a reducing sugar brings moisture and browning into the same sealed space. The useful question is not whether the peptide is stable in general, but what it does in a named pack, at a named condition, over a named period. ## Designing the study Build the study around the pack that will ship. For warehouse conditions, 25 °C/60% relative humidity and 30 °C/65% relative humidity are the usual pair; 40 °C/75% relative humidity stresses the pack for a shorter period. Add a light-exposure arm if the pack is not fully opaque. Test protein by Kjeldahl with the 5.55 factor, the SEC distribution, loss on drying, appearance, odour and microbiology at each point. Report the individual results, not a pass stamp, and name the pack and the lot family in the report. For a stick pack or a drink, run the same tests in the matrix at the process pH and heat load. A result from a 1 kg pouch should not be read across to a 25 kg drum: the headspace, the surface-to-volume ratio and the opening history are different, and the data belongs to the pack that was tested. ## The finished formula decides which failure comes first A capsule has low water activity, but the shell and excipients can still let water reach the fill, so the loss on drying is repeated after storage. A stick pack fails at its seal: a pinhole is enough, and the finished strip is checked alongside the powder. A drink combines heat, pH and oxygen. A gummy or a chew adds humectants that compete with the peptide for the same water. The bulk result is the baseline for all four, not the answer. An overage is a label and stability decision, and it will not stop a pack that leaks moisture. If the formula needs an overage, the decision belongs with the label reviewer and the stability data, not with the purchasing team. ## How the retest period is set The retest period is assigned per pack and supported by data for that pack. We do not print a single number that covers the pouch, the drum, the stick and the drink, because those are different systems. Once the retest period ends, re-test the retain before extending the date; do not extend on assumption, and do not carry a bulk figure into a repacked container. The standard packs and the opening guidance are on the MOQ page; the release tests are on the COA page; the analytical methods are described in the methods notes; and the quality page sets out the release workflow. ### 04 Chicken collagen peptides: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/protein-collagen/chicken-collagen-peptides/moq/ Reviewed: 2026-11-20 Chicken collagen peptides ship from a 1 kg foil pouch; the 25 kg fiber drum is the production pack. Standard dispatch is 1–7 days from order confirmation. To quote firmly, we need the chicken tissue, the protein factor and basis, the pack and quantity, the destination and Incoterm, the document set, and the market where the finished product will be sold. In one lineOne kilogram is a released lot in a sealed pouch; the 25 kg drum and the document pack are what turn the trial into a production order. ## Why the floor is 1 kg One kilogram is the smallest unit that can be sampled, tested, retained and traced without opening a drum. It is enough for a formulation trial plus an independent identity check, and it moves as a parcel rather than a pallet. Below that weight, the material is split from a larger lot and repacked, which adds a handling step and weakens the link between the bag on the bench and the certificate. The 25 kg drum reduces handling per kilogram, but it also locks up inventory and storage time. The minimum is therefore about traceability and a clean sample, not about pushing a buyer toward a larger order. A first purchase at 1 kg is a normal way to qualify the material; the drum follows when the formula and the label are fixed. ## Packs and physical form Standard packs · chicken collagen peptides | Pack | Net weight | Use | Pack notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; decant after opening | Fiber drum | 25 kg | Bulk production | Lined; lot code repeated on drum and liner | Granulated form | To order | Dust and flow control | Particle size and bulk density shift The catalogue material is an 80 mesh powder, ≥95% through 80 mesh. Granulation is a specification change, not a bagging option, so it has to be agreed before the order is priced. The same applies to a bulk-density target for a capsule fill: if the fill weight depends on it, put the number in the specification rather than leaving it to the packing line. ## Dispatch and transit The 1–7 day window covers picking, document preparation and handover to the carrier. It does not cover air or sea transit, customs clearance, or the customer’s own quality release. A granulated or otherwise non-standard pack can add time, and the quotation should separate that from the standard window. Ask for a dispatch date as well as a lead time. A pouch usually travels as a parcel; a drum travels on a pallet, and the Incoterm decides who books it and who clears entry. The lot documents should be sent with the goods or ahead of them, not after the pallet has arrived. ## Six points a quotation must answer - Material and source. Hydrolysed chicken collagen peptides, type I; species chicken; tissue named. The CAS number 9007-34-5 identifies collagen as a class, not the animal. - Specification. Protein factor and basis, peptide content, molecular-weight distribution, loss on drying, ash, mesh, heavy metals and microbiology. - Pack and quantity. 1 kg pouch, 25 kg drum, or granulated material to an agreed particle-size target. - Destination and Incoterm. Country, port or delivery address, and the trade term. - Documents. COA, specification, SDS, species and origin statement, allergen statement, and any declaration the importer needs for the market. - End use and market. Supplement, food or another category, and the country where the finished product will be sold. A quotation that leaves out the tissue or the market is not yet comparable with another. A powder that suits one market may sit outside the file for another, and the documents are part of the offer. Commercial terms belong on the quotation, not in this document. ## Using the 1 kg pack as a sample The pouch is a lot sample, not a demonstration. Run identity, protein, the SEC distribution, loss on drying and microbiology on it, then keep a retain from that pouch. The sample code, the certificate and the quotation should all agree. If they do not, the sample cannot support a scale-up decision. A trial that needs less than a kilogram is a repack. It leaves a bulk lot, gets a separate handling record and should not be presented as the 1 kg catalogue pouch. Request the split in writing and record its lot code alongside the trial data; the trial material and the production material may carry different lot codes even under one specification. ## Terms to settle before production Put the commercial and quality terms on one page: Incoterm, pack, dispatch window, specification revision, a certificate per lot, a retained sample, the retest period and the change-control route. A quality agreement signed before the first production order is easier than the same conversation after a dispute. If a lot falls outside the agreed specification, the first step is a joint re-test of the retained sample against the named method. The quotation and the quality agreement should name the referee laboratory and say who pays for it. A return based on appearance alone is difficult to defend on either side, and a photograph of a drum is not a test result. The catalogue ranges are on the product page; the release tests are on the COA page; the market files are on the compliance page; the MOQ glossary entry defines the term; and the logistics page covers shipping and documents. ### 05 The regulatory file for chicken collagen peptides URL: https://nutrition.rainwoodbio.com/products/protein-collagen/chicken-collagen-peptides/compliance/ Reviewed: 2026-11-20 Chicken collagen peptides enter most markets as a protein-rich food or food supplement, but the paper that lets them in is built market by market. Four questions decide the file: whether the ingredient and the product format are accepted, whether the chicken species and tissue are named consistently, whether the contaminants are inside the destination’s limits, and whether the label and claim are allowed. The buyer’s regulatory team confirms the route; this page maps the questions and the documents. In one lineThe ingredient is a protein food; the file has to show the chicken source, the label name, the contaminant results and the market route. ## The sequence of checks Compliance is a sequence, not a single certificate. The market and the category come first: a powder sold in a capsule follows supplement rules, while the same powder in a beverage or a bar follows general food rules, and the label requirements diverge even when the ingredient file is identical. The source comes next: chicken has to be named, and the tissue has to be traceable. Contaminants and microbiology follow, calculated at the finished-product dose rather than left on the drum. The claim comes last, because wording that is acceptable for an ingredient can still fail on the finished product. A positive answer at one step does not carry the next. The collagen peptides product page shows the wider range this material belongs to. ## European Union The EU file is anchored to general food law (Regulation (EC) No 178/2002), food information (Regulation (EU) No 1169/2011), food supplements (Directive 2002/46/EC), claims (Regulation (EC) No 1924/2006) and contaminants (Regulation (EU) 2023/915, as of this review). Novel-food status is checked in the EU novel-food catalogue and confirmed by the buyer’s regulatory team; this page does not decide it. For chicken, three points matter. The species should appear in the food name, because “collagen peptides” does not tell the buyer which animal. Chicken is not in Annex II of Regulation (EU) No 1169/2011, so it is not one of the allergens that must be emphasised in the ingredient list. And poultry is outside the species scope of the TSE Regulation (EC) No 999/2001, so the source paper is a chicken species and origin declaration rather than a bovine-style TSE attestation. ## United States In the US, the dietary-supplement route under DSHEA positions collagen peptides as a dietary ingredient, and the seller remains responsible for identity, purity and the label. The label follows 21 CFR 101, with the Supplement Facts panel and the ingredient name; a structure/function statement needs substantiation and the DSHEA disclaimer. The importer’s FSVP obligations sit alongside the supplier’s documents. Chicken is not on the federal major-allergen list, so the source does not by itself trigger a “contains” statement, although the ingredient name still identifies it. The buyer confirms whether an NDI notification or another pre-market route applies. Contaminant limits are not harmonised at federal level: the file uses the specification, FDA action levels where they exist, and a state layer such as Proposition 65 for California. ## United Kingdom The UK applies retained food information law: the Food Safety Act 1990 and the Food Information Regulations 2014 in England, with devolved equivalents elsewhere. The FSA handles novel-food assessment. Great Britain and Northern Ireland have diverged in several areas, so the destination belongs on the file; a label accepted in London is not automatically accepted in Belfast, or the reverse. ## Contaminants and micro Contaminants have to be calculated at the finished-product dose, not only checked on the drum. The table is a starting point for a supplement file; the destination text in force and the daily dose set the final limit. Contaminant and micro references · confirm at the finished-product dose | Parameter | Working reference | What the lot file needs | Lead (Pb) | 3.0 mg/kg | Result per lot, method, and the intake calculation | Cadmium (Cd) | 1.0 mg/kg | Result and any category-specific rule | Mercury (Hg) | 0.10 mg/kg | Result and method | Arsenic (As) | No harmonised EU limit; agreed customer limit | The agreed number, method and basis | APC | ≤1,000 cfu/g | Count and method | Yeast and mould | ≤100 cfu/g | Count | E. coli and Salmonella | Absent | Absence statement for the lot The three metal figures are common supplement references, not a substitute for the text in force. Arsenic usually comes from the customer specification because the EU has not set a harmonised supplement limit. The microbiological lines are commercial agreements in the specification, not a harmonised criterion written for collagen peptides. ## Label and claims Chicken collagen is a protein, and a protein claim is about the finished food. In the EU and the UK, “source of protein” and “high protein” depend on the share of energy from protein in the product as sold, so the calculation belongs to the brand rather than the drum. Health claims have to come from the authorised list under Regulation (EC) No 1924/2006 as retained and as of this review. The entries that mention collagen are vitamin and mineral claims about collagen formation; a collagen peptide cannot borrow them unless the vitamin is present at the required level. No disease-related claim is available in either market. In the US, a structure/function statement needs substantiation and the DSHEA disclaimer. The safer label describes the ingredient and its composition — chicken collagen peptides, protein per serving, peptide distribution — and leaves the outcome to the consumer. This site publishes specifications, not health claims. ## The document pack Documents held for a chicken collagen lot | Document | What it establishes | Specification | Species, tissue, protein factor and basis, peptide lines, mesh | COA | Lot values against the specification, with methods | TDS | Solubility, handling, storage and pack | SDS | Transport and handling classification | Species and origin statement | Chicken, tissue, country of origin and site | Allergen statement | The chicken source and any declaration the market requires | Site certificate | GMP, HACCP or an equivalent food-safety scheme | Halal or kosher certificate | Site and process specific, when the market asks A chicken lot does not need a bovine TSE declaration, and a bovine file does not replace the chicken species statement. If one finished product uses both sources, keep the two document sets apart and name the source on every lot. ## Before the first order - Market and product category route confirmed. - Species and tissue on the specification, the COA and the label. - Contaminant results calculated at the finished-product dose. - Micro limits agreed and tested per lot. - Ingredient name and allergen statement consistent. - Claim wording checked for the destination. - Document versions current and controlled. The analytical lines are on the COA page; the source decision is on the grade page; the methods behind the results are in the methods notes; the quality page covers the release file; and the catalogue ranges are on the product page. ### 06 How we prove a chicken collagen lot is chicken collagen URL: https://nutrition.rainwoodbio.com/products/protein-collagen/chicken-collagen-peptides/identity/ Reviewed: 2026-11-20 A chicken collagen lot is proved in layers: protein and hydroxyproline show the nitrogen is collagenous, SEC shows the collagen has been cut to peptides, and a species test or a documented chicken chain shows the animal. The protein figure cannot name the species, and a species test cannot show hydrolysis, so the file needs both. The catalogue fixes the protein, peptide and molecular-weight limits; the source evidence sits beside them. In one lineProtein and hydroxyproline prove collagen, SEC proves hydrolysis and only a species test proves chicken. ## The layers of identity Identity is not one test. A certificate that answers one layer and implies the others is where most identity failures begin. The layers below are cumulative: the first says the paperwork names the material, the second says the nitrogen belongs to collagen, the third says the collagen has been hydrolysed, and the fourth says the animal is chicken. Identity layers · the question, the evidence and the blind spot | Layer | Question | Evidence | What it cannot show | Document | Are the species and tissue named? | Name, CAS number, species and tissue statement | Whether the powder matches the paper | Composition | Is the nitrogen collagenous? | Kjeldahl protein; hydroxyproline; amino acid profile | Which species or tissue | Size | Has the collagen been hydrolysed? | SEC peptide content and molecular-weight distribution | Which animal | Species | Is the animal chicken? | Species-specific PCR on raw tissue; a validated method on the powder; documented chain | Which tissue; whether the tested sample matches the drum | Chain | Which plant and raw material? | Processing record; lot traceability; supplier audit | Analytical proof on its own The layers fail in different ways. A lot with the right hydroxyproline and the wrong species passes the first two and fails the product; a lot with the right species and a gelatin curve passes the species test and fails the process. ## The ratios that carry the argument The first ratio is the nitrogen factor. Collagen carries close to 18% nitrogen, so the collagen convention is N × 5.55; a general protein uses N × 6.25. The same nitrogen result reads about 12.6% higher under the general factor, which turns 90.0% into roughly 101%. That is a convention change, not a richer powder, and the certificate should print the factor beside the protein figure. The second ratio is hydroxyproline against protein. Hydroxyproline is the amino acid collagen carries and most other proteins do not, so a protein figure that rises while the hydroxyproline stays flat is the pattern to question. The catalogue here does not set a hydroxyproline limit, which makes it an additional test: ask for the result on the lot and read it against the protein figure and the amino acid profile, not as a stand-alone number. The third ratio is peptide size. The specification asks for peptide content ≥80.0% and ≥80% of the peptide below 3,000 Da, measured by SEC-HPLC. Protein, peptide content and the molecular-weight fraction are three different denominators; read each one with its method, and ask for the fraction bins rather than a single cut-off. A powder that meets the cut-off at the high end can still haze or wet out slowly. ## What X-ray diffraction does and does not add Collagen peptides are amorphous, so X-ray diffraction returns a broad halo rather than a pattern of sharp peaks. The scan adds no identity line for the protein: it cannot distinguish chicken collagen from bovine collagen, and it cannot show that the collagen has been hydrolysed. Hydroxyproline and SEC answer those questions. XRD enters on the mineral and filler side. A crystalline filler such as salt, a mineral or crystalline lactose shows peaks that an amorphous peptide does not, which is a useful check when ash or the mass balance looks wrong. It is a request item, not a routine release line, A line saying only “XRD conforms”, with no pattern or reference, tells the reader almost nothing. ## What adulteration looks like Chicken collagen substitutions and the signals | Route | What changes | Test that finds it | Bovine or porcine collagen | Species, not the collagen chemistry | Species-specific PCR on raw tissue or a validated powder method; chain of custody | Gelatin | High-molecular-weight fraction; gelling on cooling | SEC distribution; gel test | Non-collagen protein | Protein up, hydroxyproline down | Hydroxyproline-to-protein ratio; amino acid profile | Nitrogen spiking | Kjeldahl up with no peptide mass | Ratio; total nitrogen against amino acid nitrogen | Maltodextrin or starch | Protein and peptide figures down | Mass balance; carbohydrate | Mineral filler | Ash up, protein down | Ash; ICP-MS The species route is the one that matters most here, because bovine collagen is a close chemical match. Protein, hydroxyproline and the peptide curve can all look right while the species is wrong, and the label then carries a claim the powder cannot support. Only a species-specific method or a documented, audited chicken chain closes that question. ## How to write the identity into the specification - “Hydrolysed chicken collagen peptides, type I; species chicken, tissue named.” - “Protein ≥90.0% on a dry basis by Kjeldahl with N × 5.55; factor and basis on the COA.” - “Peptide content ≥80.0% by SEC-HPLC; ≥80% below 3,000 Da; distribution reported.” - “Hydroxyproline result reported, with the method.” - “Loss on drying ≤7.0%; ash ≤5.0%; ≥95% through 80 mesh.” - “Species evidence: chicken declaration and, on request, a species-specific PCR result.” - “No non-collagen protein, gelatin or filler above the agreed limit.” The CAS number, 9007-34-5, is the generic collagen number; it is identical for chicken, bovine and fish collagen and says nothing about the species. A specification that leans on the CAS line has not named the animal. ## Five questions for the supplier - Which tissue is the lot made from, and is the chicken species named on the COA? - Which nitrogen factor and basis were used for the protein figure, and what is the hydroxyproline result? - Can you send the full SEC distribution with the fraction bins, not only the percentage below 3,000 Da? - What evidence supports the chicken claim: a species-specific test, a raw-material declaration, or both? - Does the lot code on the drum match the COA, the retained sample and the species statement? The answers belong in the file next to the certificate. The analytical lines are on the COA page; the grade question is on the grade page; the chicken-versus-bovine comparison is on the level-four page; the chromatographic method is in the HPLC method note; and the quality page describes the release file. ### 01 What the COA for eggshell membrane collagen contains URL: https://nutrition.rainwoodbio.com/products/protein-collagen/eggshell-membrane-collagen/coa/ Reviewed: 2026-11-20 Eggshell membrane collagen is a peptide hydrolysate with a mineral footnote, and its certificate has to show both. The protein figure and the SEC-HPLC distribution describe the hydrolysate; the ash and calcium results describe how much shell travelled with the membrane. The table below lists the catalogue gates for an 80 mesh lot, and the lot certificate records what the laboratory found against each one. In one lineA membrane collagen certificate is read in three lines: the protein figure with its factor, the peptide distribution with its method, and the ash that shows how cleanly the membrane was separated from the shell. ## The certificate as a test report Begin with the parameter block. For each line, the certificate should show what was measured, how it was measured and the boundary the lot had to meet. A certificate that prints only “conforms” gives the reader a verdict without the working. COA parameter list · eggshell membrane collagen, 80 mesh | Parameter | Method | Release limit | Appearance | Visual | Off-white to pale yellow powder | Protein | Kjeldahl, N × 5.55 | ≥90.0% | Peptide content | SEC-HPLC | ≥80.0% | Molecular weight | SEC-HPLC, calibration reported | ≥80% below 3,000 Da | Loss on drying | Gravimetric | ≤7.0% | Ash | Gravimetric, furnace | ≤5.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and enrichment | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh Source is a line on the specification as well as a fact about the lot. Egg membrane is an egg-derived material, and the certificate and the specification should say so. The identity page shows how that claim is supported. ## What the protein and peptide figures are measured against Kjeldahl reports nitrogen, and the number becomes protein only after a divisor is chosen. Collagen uses 5.55, a convention that assumes about 18% nitrogen; a general food protein uses 6.25, which assumes 16%. The same nitrogen result divided by the smaller figure gives a protein percentage roughly 13% higher, so a certificate that omits the factor is not comparable with one that names it. Moisture determines the second half of the protein statement. A 90.0% figure on the dry basis becomes about 83.7% as-is when the loss on drying is 7.0%. Both numbers can be correct; a purchase order or label that mixes them is not. SEC-HPLC produces two different statements. One is how much of the powder behaves as peptide; the other is how the peptide mass is spread across molecular weights. A lot can clear the 80% peptide gate and still contain a tail of larger molecules that clouds a drink. Read the curve, the column and the calibration, not just the pass line. Ash is what remains after the organic fraction burns away. Calcium carbonate from the shell is the expected source in this material, so an ash result near the 5.0% ceiling points to shell carry-over. Calcium by ICP-OES tells you whether that is the cause; a second ash test does not. ## Release limit versus batch result A specification is a gate; a result is a measurement. The certificate should keep them in separate columns, because a result column copied from the specification says nothing about the lot. What the result column should contain | Parameter | Release limit | Result column | Protein | ≥90.0%, basis stated | A measured percentage, with the factor and the basis | Peptide content | ≥80.0% | The measured percentage and the SEC method | Molecular weight | ≥80% below 3,000 Da | The distribution, not only the cut-off | Ash | ≤5.0% | A measured percentage; calcium if ash is high | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot Microbiology needs a count and an absence statement; for an egg-derived powder, the absence of Salmonella carries the most weight. Metals need one figure per element. A single total hides which metal drove the number. ## What moves between lots Several physical steps move a lot. The membrane is peeled or washed off the shell at a breaking plant, and how much shell dust survives that step changes ash, calcium and colour. Hydrolysis time and temperature set the peptide curve. Drying sets moisture and colour; milling and sieving set the 80 mesh result. Odour is a useful non-numeric signal. A membrane hydrolysate can smell faintly of egg or broth, and the note grows in a warm, damp store. A lot can pass protein while its odour has moved beyond what a flavoured drink can cover, so keep a retained sample and its storage history. One result near a limit is less informative than a trend. Watch protein, ash and the high-molecular-weight tail across consecutive lots, and check that the lot code on the certificate matches the pack and the retained sample. ## When to order an outside test Use an outside laboratory when the supplier's certificate cannot close the question: a new membrane source, a first shipment to a regulated market, a disputed source claim or a contested result. A focused panel is protein with the factor, hydroxyproline, SEC-HPLC, egg-specific PCR, ICP-MS, microbiology and calcium or ash XRD. Ask for the detection limit behind every “not detected” statement, and keep the sample identity intact. If a result is challenged, send the retained sample, the specification and the supplier's certificate to the referee, and ask for the discriminating tests rather than a second run of the same assay. ## What to compare between suppliers Compare specifications, not just protein percentages. Six lines expose most of the difference: protein with factor and basis; the SEC curve and its method; ash and calcium; membrane preparation and origin; the egg allergen statement and the enzyme; pack, lot code and micro results. Traceability is the second layer. The file should name the manufacturing site, the membrane preparation, the hydrolysis conditions and the retained sample. The catalogue ranges are on the product page; the source evidence is on the identity page; the market file is on the compliance page; the SEC method sits in the methods library; the release workflow is on the quality page. ### 02 Eggshell membrane collagen: peptide cut, mesh and ash URL: https://nutrition.rainwoodbio.com/products/protein-collagen/eggshell-membrane-collagen/grades/ Reviewed: 2026-11-20 Eggshell membrane collagen is sold as a hydrolysed peptide powder, and three numbers separate the grades that matter: the peptide cut, the mesh and the ash ceiling. The catalogue standard is ≥90.0% protein, ≥80.0% peptide with ≥80% of the distribution below 3,000 Da, ≥95% through 80 mesh and ash ≤5.0%. A granulated form, a tighter ash limit or a narrower peptide cut can be agreed, and each one changes flow, clarity or label arithmetic rather than the source. In one lineThe grade of an eggshell membrane collagen is set by three numbers — the peptide cut, the mesh and the ash — while the membrane source stays the same across all three. ## Why a membrane collagen has grades at all The raw material is a membrane, not a hide. It arrives as a thin, insoluble network that lines the inside of the eggshell, and the hydrolysis step turns that network into water-soluble peptides. How far the hydrolysis is taken decides the molecular-weight distribution; how the membrane is separated from the shell decides the ash; how the dried powder is milled or granulated decides the mesh and the flow. Those are three separate levers, and a buyer usually cares about one at a time. A capsule line cares about flow and fill weight, a clear drink cares about haze and mouthfeel, and a label that declares a peptide content cares about the distribution curve. The grade conversation should start from the dosage form and the label, not from a generic “fine powder”. The product page carries the catalogue ranges that the grades are built from. ## The grade levers side by side Grade levers · hydrolysed eggshell membrane collagen | Lever | Catalogue position | Tighter option | What it moves | Protein | ≥90.0% (Kjeldahl, N × 5.55) | Higher minimum on request | Mass per declared milligram; mass balance | Peptide cut | ≥80.0% peptide; ≥80% below 3,000 Da | A narrower distribution agreed on the curve | Solubility, haze, mouthfeel, foam | Mesh | ≥95% through 80 mesh | Granulated on request | Flow, dust, blend uniformity | Ash | ≤5.0% | Lower ceiling on request | Shell carry-over, colour, mineral load The table describes specification options, not a stock list. Each tighter option has to be written into the purchase order and confirmed on the certificate; a standard grade does not silently become a tighter one because the application would prefer it. ## Solubility, colour and flow The hydrolysate dissolves in water to a clear to slightly opalescent solution. Haze usually comes from the high-molecular-weight fraction, from a pH near the isoelectric point, or from undissolved granule; it is a reason to look at the distribution curve rather than to add more mixing. The solution foams when agitated, which matters on a filling line and in a stick pack that is shaken by the consumer. Colour runs from off-white to pale yellow. A darker or greyer powder can point to shell carry-over, a hotter drying step or a Maillard reaction with residual reducing sugars; the protein figure can still pass. Odour follows the same pattern: a faint egg or broth note is normal for a membrane hydrolysate, and it strengthens with moisture and storage temperature. Granulation improves flow and reduces dust, but it also slows dissolution and changes the particle-size line. A capsule or tablet line that values flow may prefer it; a powder blend that must dissolve quickly may not. The mesh figure is a finishing specification, so it can change without any change in the chemistry. ## Dose arithmetic and the label The label mass and the protein mass are not the same number. A formula that declares 500 mg of eggshell membrane collagen per serving weighs 500 mg of the powder. At the catalogue protein minimum that powder carries at least 450 mg of protein, before the loss on drying is counted. That is arithmetic, not a dose recommendation. The peptide line is separate, and the specification has to say whether the 80.0% is expressed on the powder or on the protein. The two readings give different numbers: if the peptide minimum is on the protein, 400 mg of peptide needs about 556 mg of powder at the 90.0% protein figure; if it is on the powder, it needs 500 mg. A label that mixes the two bases is wrong before any analytical variation is counted. If the label declares protein rather than the ingredient, the calculation runs the other way: the powder mass is the declared protein divided by the protein fraction. A 90.0% minimum means 500 mg of protein needs at least 556 mg of powder. The basis has to travel with the number: a 90.0% figure on the dry basis is about 83.7% as-is at the 7.0% moisture limit, so a label built on the dry-basis figure and a weigh-up built on the as-is powder will disagree by several percent. ## What to write into the specification - “Hydrolysed eggshell membrane collagen, CAS 9007-34-5 (source-defined); source: eggshell membrane.” - “Protein ≥90.0% by Kjeldahl, N × 5.55, basis stated; loss on drying ≤7.0%.” - “Peptide content ≥80.0% by SEC-HPLC; ≥80% of the distribution below 3,000 Da, curve reported.” - “Ash ≤5.0%, with calcium reported beside the ash result.” - “Particle size ≥95% through 80 mesh; granulated on request.” - “Heavy metals, microbiology and egg allergen statement as on the COA page; hydrolysis enzyme and origin declared.” The specification should be specific enough that a second laboratory could reproduce the release decision. The COA page lists the release tests, and the membrane versus collagen peptides page explains why the source belongs in the same document as the peptide cut. ## When a grade is the wrong choice A high-ash grade is the wrong choice for a clear beverage or a pale powder blend: the mineral load can add haze and colour even when the protein passes. A granulated grade is the wrong choice when the application needs rapid dissolution and the line has no high-shear step. A narrow peptide cut is unnecessary when the label makes no peptide claim and the dosage form is an opaque capsule. The reverse error is just as common: buying a standard grade and writing a label that promises a specific peptide size or a low ash figure the certificate does not carry. The grade is part of the specification, and the label should not describe a grade that was not ordered. If the formula needs a glycosaminoglycan story as well as collagen, that is a separate ingredient decision. Hyaluronic acid is specified on its own molecular-weight and assay lines; the small GAG fraction that comes with a membrane hydrolysate is not a substitute for it. ### 02.1 Eggshell membrane collagen vs collagen peptides: source and label URL: https://nutrition.rainwoodbio.com/products/protein-collagen/eggshell-membrane-collagen/grades/eggshell-membrane-vs-collagen-peptides/ Reviewed: 2026-11-20 Eggshell membrane collagen and collagen peptides are both hydrolysed collagen, but they are not the same ingredient. The membrane material comes from the two-layer membrane inside the eggshell and carries collagen types I, V and X together with egg membrane proteins and glycosaminoglycans; the collagen peptides on this site come from bovine hide and are mainly type I. The source decides the allergen statement and the label name before the peptide distribution does. In one lineThe membrane source and the peptide cut are two separate decisions: the source sets the allergen and the label, and the peptide cut sets the solubility and the mouthfeel. ## Two sources, two raw materials Eggshell membrane is the thin, two-layer network that lines the inside of an eggshell. It is separated from the shell at a breaking plant and hydrolysed into a soluble peptide powder. The membrane is a distinct tissue: it is not the shell, and it is not the egg white or the yolk. Its protein is a mixture of collagen and other membrane and egg white proteins, which is why the source statement and the allergen statement are linked. Collagen peptides are made from a different raw material. The collagen peptides product is bovine hide type I: the hide is cleaned, hydrolysed, filtered and dried. Hide is a connective tissue with a high collagen content and little of the mineral load that comes with a shell. The two materials can be made to a similar protein figure and still be different ingredients. ## Collagen types and what else is in the powder Eggshell membrane collagen against bovine collagen peptides | Property | Eggshell membrane collagen | Bovine collagen peptides | Raw material | Eggshell membrane | Bovine hide | Collagen types | Types I, V and X | Mainly type I | Other protein | Egg membrane and egg white proteins | Low; collagen is the dominant protein | Glycosaminoglycans | Present in the membrane matrix | Low | Ash ceiling | ≤5.0% | ≤2.0% | Allergen | Egg | Not egg-derived | Label name | Hydrolysed eggshell membrane collagen | Collagen peptides (bovine) The “other protein” row is the one that changes the analysis. A membrane hydrolysate is not pure collagen, so its hydroxyproline share is lower than a hide peptide's, and a specification written around a hide collagen band would misjudge it. The membrane also brings a small glycosaminoglycan fraction, including hyaluronic acid and chondroitin sulfate, but that fraction is part of the membrane matrix, not a substitute for a specified hyaluronic acid ingredient. ## The peptide cut is a separate specification Both products are hydrolysed, and both can be specified with a large fraction below 3,000 Da. The peptide cut is therefore not what separates the sources; it is a second decision that sits on top of the source. A membrane hydrolysate can be cut coarse or fine, and so can a hide peptide. The distribution curve, the peptide content and the protein figure are the lines that describe the cut. The protein factor is the same convention on both sides: N × 5.55 for collagen. What differs is the non-collagen fraction. A membrane lot at 90.0% protein carries more non-collagen nitrogen than a hide lot at the same figure, and that is expected for the source rather than a defect. The specification should state the factor and the basis, and it should not use a hide-collagen hydroxyproline band as the release gate for a membrane material. The practical test is the one that answers the question in front of you. If the question is “is this the membrane source?”, use an egg-specific test and the ash and calcium line. If the question is “how fine is the cut?”, use SEC-HPLC. If the question is “how much protein?”, use Kjeldahl with the factor. No single number answers all three. ## What the label has to say The ingredient name follows the source. “Hydrolysed eggshell membrane collagen” names the material; “collagen peptides” alone would not tell the buyer or the consumer that the source is egg. In the EU, the ingredient list uses the name of the food, and the allergen declaration follows Regulation (EU) No 1169/2011. In the US, the Supplement Facts panel names the dietary ingredient, and the egg declaration follows the Food Allergen Labeling and Consumer Protection Act. Vegetarian and vegan positioning is a separate check. An egg-derived material is not vegan, and a “vegetarian” claim depends on the definition the certifier or the market uses. Halal and kosher status is usually about the processing aids and the hydrolysis enzyme rather than the egg itself, so a certificate has to cover the whole process, not only the raw material. The label should not imply that the two products are interchangeable. A formula that switches from bovine collagen peptides to eggshell membrane collagen changes the ingredient name, the allergen statement and the supporting file, even if the protein and peptide figures on the two certificates look similar. ## The egg statement Egg is one of the allergens that must be declared in the EU and the US, and the obligation is not removed by hydrolysis. The membrane is coated with egg white proteins, and the hydrolysate is made from the whole membrane, so the egg protein is part of the material rather than a trace from a shared line. A statement that says “collagen” without “egg” is incomplete. Three practical points follow. First, the allergen statement belongs in the specification file and on the finished label, not only in an email. Second, a shared line or a shared carrier can add egg contact that the certificate does not show, so the statement should cover the process as well as the material. Third, “egg-free” is not available for this product, and a brand that needs an egg-free claim should choose a different source rather than ask for a statement the material cannot support. The hydrolysis enzyme is part of the same review. A plant-derived protease and an animal-derived protease are not equivalent for a halal or kosher file, and the enzyme's carrier can carry its own allergen. Ask for the enzyme source and the carrier before the label is fixed. ## When to choose which Choose eggshell membrane collagen when the source is the point: a formula or a brand that wants an egg-derived membrane material, or a label that names the membrane. Accept the egg allergen declaration, the membrane note and the ash ceiling as part of the choice. The peptide cut can be agreed within the catalogue range, so the source decision does not force a particular solubility. Choose bovine collagen peptides when a neutral, high-protein collagen source with a low ash ceiling is the requirement, or when an egg-free label is needed. The bovine collagen peptides specification sets protein, hydroxyproline and molecular weight on a hide raw material, and its allergen position is different. Neither choice replaces a separate hyaluronic acid or chondroitin sulfate ingredient when the formula needs a declared dose of those materials. The membrane's native GAG fraction is part of its composition, not a way to declare a GAG dose. The grades page places this comparison in the wider range; the product page carries the catalogue specification; the compliance page covers the egg allergen and the market route; the methods library describes the assays. ### 03 Eggshell membrane collagen: moisture, heat and the pack URL: https://nutrition.rainwoodbio.com/products/protein-collagen/eggshell-membrane-collagen/stability/ Reviewed: 2026-11-20 Eggshell membrane collagen is a hygroscopic peptide powder, and its shelf life is decided by moisture, heat and the mineral load that came with the membrane. Moisture lowers the as-is protein and raises the loss on drying; heat darkens the off-white colour and strengthens the odour; a high ash load can carry alkaline shell mineral into the powder. The sealed foil pouch at ambient temperature is the standard pack, and an aqueous solution is the least stable format. In one lineThe powder keeps in a sealed, dry pack; moisture, heat and the mineral load are what shorten the shelf life, and the solution is the format that fails first. ## The powder: moisture, colour and odour The catalogue sets loss on drying at ≤7.0%. That is a release gate, not a storage allowance. Once the foil pouch is opened, the powder picks up moisture from the air; the loss on drying rises, the as-is protein falls, and the powder can cake in the bag. A tight seal and a dry store are part of the specification in practice, even when they are not printed on the certificate. Heat drives the colour and the odour. A membrane hydrolysate carries a faint egg or broth note, and the note strengthens faster in a warm store. The off-white to pale yellow colour can move toward tan or grey; a Maillard reaction with residual reducing sugars and a hotter drying step both leave a mark. The protein figure can still pass while the powder has become difficult to mask in a flavoured blend. Light is a secondary factor for this material compared with moisture and heat, but the pack is still opaque for a reason. Keep the powder in its original foil pouch or in a closed, opaque container, and let a cold pack equilibrate to room temperature before opening so that condensation does not form on the powder. ## The solution: clarity, foam and microbiology The hydrolysate dissolves in water to a clear to slightly opalescent solution. In solution, the failure modes change: a protein-rich liquid supports microbial growth, heat can haze or thicken it, and agitation produces foam that is difficult to fill. A ready-to-drink process adds a heat load that the powder never sees; a stick pack avoids that step because the consumer adds water at the point of use. Clarity is a formulation question as much as a stability one. The high-molecular-weight fraction, a pH near the isoelectric point and an undissolved granule all scatter light. A solution that is clear at one concentration can haze at a higher one, and a hold at warm temperature can push a borderline solution over the edge. Validate the concentration, the pH and the hold time together. When a liquid format cannot be avoided, shield it from light, hold the pH in a validated range, keep dissolved oxygen low and prove the hold time before filling. Data from the bulk powder does not carry over to a beverage: matrix, process and pack each set a different rate, so the drink needs its own shelf-life measurement. ## What drives degradation Factors that move eggshell membrane collagen during storage | Factor | What it does | Control | Moisture | Raises loss on drying; lowers the as-is protein; caking | Sealed pouch; dry store; desiccant if needed | Heat | Darkens colour; strengthens odour; accelerates moisture damage | Controlled store; cool drying and filling | Oxygen | Oxidation of residual lipid and protein; odour | Low headspace; sealed pack | Light | Colour shift at the surface | Opaque or foil pack; dark store | pH | Haze and solubility change in solution | Validate matrix pH; buffer if needed | Shell mineral | Ash and calcium load; colour and taste | Membrane separation; ash ceiling | Microbial load | Growth in a wet matrix or an open pack | Validated kill step; sealed pack; dry handling These factors are not independent. A warm, humid store is worse than two separate effects added together, and a neutral solution in a warm filling room brings microbial risk, haze and foam at once. The question is not whether the peptide is stable, but how long it holds in a named pack and condition. ## A stability protocol for the ingredient A protocol names its pack, storage condition, time points and test panel. The warehouse case uses long-term storage at 25 °C/60% relative humidity plus intermediate storage at 30 °C/65% relative humidity; the pack is stressed at 40 °C/75% relative humidity in the accelerated arm. If the material will be sold in a clear container or a stick pack, add a light-exposure arm and test the finished strip, not only the powder. Test protein, peptide distribution, loss on drying, ash, appearance, odour and microbiology at each point. The report should show the individual results, not only a pass statement, and it should identify the pack and the lot family. For a beverage or a stick pack, repeat the work in the matrix and at the process pH and heat load. Request the stability summary for the exact pack on the order, not one borrowed from a sibling pack in the same product family. A 25 kg drum and a 1 kg pouch differ in surface-to-volume ratio, in headspace and in how often they are opened, so the data has to match the container. ## The finished formula changes the answer A capsule or tablet starts with low water activity, but the shell and the excipients can still move moisture into the fill. The hygroscopic powder can stick to punches and pick up water from a humid dose room, so the fill weight and the appearance are checked after storage as well as at release. A tablet compressed at high humidity can show a harder, darker surface without any change in the lot. A stick pack fails at the seal: a pinhole in the foil is enough, and the strip is inspected as well as the powder. The flavour system has to mask the membrane note, and a stronger note after storage is a stability result, not a flavour problem. A powder blend with a reducing sugar can darken at the surface; the colour change is worth monitoring even when the protein figure is unchanged. Ready-to-drink formats bring heat, pH, oxygen and microbial risk together. Bulk data is where the work starts, not where it ends. Whether to add an overage is a decision for the formulator and belongs to the label and stability file; an overage cannot compensate for a pack that admits moisture. ## How the shelf life is set No single shelf-life figure is published for eggshell membrane collagen: the pack and the storage condition determine it. The retest period that applies is written on the specification and rests on the stability file for that same pack. A figure quoted without a pack, a condition and a test panel is a claim, not a shelf life. Once the retest period ends, re-assay the retained sample before extending use. Extension by assumption is not acceptable, and a bulk figure must not travel to a repacked container. The product page lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the methods library describes the assays; the quality page describes the release workflow. ### 04 Eggshell membrane collagen: MOQ, packs and lead time URL: https://nutrition.rainwoodbio.com/products/protein-collagen/eggshell-membrane-collagen/moq/ Reviewed: 2026-11-20 The MOQ for eggshell membrane collagen is 1 kg, supplied in a 1 kg foil pouch; bulk orders use a 25 kg fiber drum. Lead time is 1–7 days for the standard 80 mesh powder. A firm quotation needs the specification, the pack, the destination and the document set, because the egg allergen statement and the hydrolysis enzyme are part of the offer rather than an afterthought. In one lineThe 1 kg pouch is the qualification unit for an eggshell membrane lot: enough for a trial, a retain and a certificate check before the 25 kg drum. ## Why the minimum is 1 kg A single pouch covers a bench trial, a retained sample and an independent identity check, and it can travel as an ordinary parcel when a formulator needs material ahead of a fixed production plan. The pouch is a commercial unit with its own lot code; it is not a scoop taken from a bulk drum. Any quantity under a kilogram has to be taken out of a larger lot and put into a new container. The powder itself does not change, but the original pack identity is lost, extra handling is introduced and tracing the material back to its lot becomes harder. A 25 kg fiber drum is the bulk unit: it cuts the handling per kilogram, yet it ties up inventory and keeps the powder in storage for longer. The minimum is therefore a pack decision, not a volume incentive. ## Packs and formats Standard eggshell membrane collagen packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal the pouch once opened | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Particle profile changes; longer lead time | Repack | On request | Bench trial below 1 kg | A split lot; its own handling record The catalogue form is an 80 mesh powder: ≥95% through 80 mesh. Granulation is a different specification, not a packing choice. If the dosage form needs a freer-flowing powder or a coarser granule, say so before the quotation, because the change moves the particle-size line and may move the lead time. The 1 kg foil pouch is the moisture barrier for a hygroscopic powder; the seal is the weak point. The 25 kg fiber drum relies on its inner liner, so keep the liner closed and keep the drum off a concrete floor in a humid store. The lot code on the pouch, the drum, the liner and the certificate should match. ## Lead time and dispatch An order for the standard 80 mesh powder is quoted at 1–7 days from confirmation. Picking, preparing the documents and dispatch sit inside that window; transit, customs clearance and the buyer's own quality release do not. Granulation, a repack or a document set outside the standard file adds time, and the quotation should list that addition on its own line. Ask for the dispatch date, not just the 1–7 day range. A 1 kg pouch usually moves as a parcel, while the 25 kg drum travels on a pallet; the Incoterm says who books the freight and who clears entry. The COA and the allergen statement should travel with the pack, not arrive after it. ## What a quotation needs Six items make a quotation firm enough to compare: - Product and source. Hydrolysed eggshell membrane collagen, CAS 9007-34-5, eggshell membrane source named. - Specification. Protein with its factor and basis, peptide content, molecular-weight cut, ash, mesh and the contaminant panel. - Quantity and pack. A 1 kg foil pouch, a 25 kg fiber drum or a granulated grade. - Destination and Incoterm. Country, port or address, and the trade term. - Documents. COA, specification, SDS, the egg allergen statement, the hydrolysis enzyme and origin, and any market-specific statement. - Intended use and market. Capsule, tablet or powder blend, and the market where it will be sold. A quotation that leaves out the market, the membrane source or the allergen documents is incomplete. The same lot can fit one destination's file and sit outside another's, because the paperwork is part of the offer. Commercial terms are stated on the quotation; this page covers the pack and the specification. ## The sample is a lot, not a demonstration The pouch ordered at the minimum is the qualification sample. Before scaling, run protein, peptide distribution, loss on drying, ash, heavy metals and microbiology, and retain a portion from that same pouch. Sample, COA and quotation should carry one lot code. Material that cannot be tied to a lot is a demonstration rather than a qualification. When a bench trial calls for less than a kilogram, the material is a repack and not the catalogue pouch. It comes out of a bulk lot, carries its own handling record and must not be described as the 1 kg foil pack. Request the split in writing and file its lot code beside the trial results. The powder weighed on the bench and the powder in the production drum can come from separate lots even where the specification is the same. ## Terms to settle before the first order Commercial and quality terms belong on one quotation: Incoterm, pack, dispatch window, the specification revision, a COA per lot, the retained sample, the retest period and the route for a change. Put them into a quality agreement before the first production order, because the same discussion is far harder once a dispute has started. The change-control clause should name the source, the membrane preparation, the hydrolysis enzyme, the mesh and the pack. A change in any of them can move the allergen statement, the peptide distribution or the particle size, and the customer should hear about it before the lot ships rather than after. When a lot fails the agreed specification, the retained sample and a joint re-test against the named method decide the question; a photograph of the drum does not. The quotation and the quality agreement should name the referee laboratory, say which lab both sides accept and state who pays for it. A return argued from appearance alone is difficult to defend for either party. The product page carries the catalogue specification; the COA page lists the release tests; the compliance page covers the market files; the methods library defines the assays; the quality page describes the release file. ### 05 The regulatory file for eggshell membrane collagen URL: https://nutrition.rainwoodbio.com/products/protein-collagen/eggshell-membrane-collagen/compliance/ Reviewed: 2026-11-20 Eggshell membrane collagen is an egg-derived food ingredient, and the regulatory file turns on three points: the egg allergen declaration, the route by which the membrane hydrolysate may be sold in the destination, and the contaminant and microbiological limits for the finished product. The specification and the COA support the file; they do not decide the route. The buyer's regulatory team confirms it. In one lineThe specification describes the material; the regulatory file shows the egg allergen position, the market route and the limits that apply to the finished product. ## The four checks The first check is the ingredient route: whether the membrane hydrolysate can be sold as a food or a food supplement in the destination, and on what basis. The second is the allergen declaration, which for this material is egg. The third is the contaminant and microbiological panel against the limit for the product as sold. The fourth is the label and any claim. Each check has a different owner: the ingredient route belongs to the supplier and the importer, the allergen declaration to the recipe and the label, the contaminant limit to the food category and the dose, and the claim to the brand. A certificate can be complete and still leave all four open. Egg membrane is not hide collagen. It is an animal by-product with a shorter documented history of food use in some markets, so the novel-food or new-dietary-ingredient question is a real one. The answer is specific to the hydrolysate, the process and the use level. ## European Union In the EU, the route is checked against Regulation (EU) 2015/2283 on novel foods and the Union list in Implementing Regulation (EU) 2017/2470. Where an entry applies, it is tied to a defined material, a population and a maximum use level; a different membrane preparation, enzyme or peptide cut can fall outside it. The buyer's team confirms that the current text covers the exact material and use. Food supplements sit under Directive 2002/46/EC, labelling under Regulation (EU) No 1169/2011, and claims under Regulation (EC) No 1924/2006. Contaminant limits are in Regulation (EU) 2023/915. A product can be a permitted supplement and still fail the allergen, contaminant or claim review. Great Britain applies retained food law, while Northern Ireland follows the EU framework. The delivery address decides which applies. ## United States In the United States, the question is how the material is positioned as a dietary ingredient or a food ingredient, and whether the intended use fits that position. A new dietary ingredient needs a notification under 21 U.S.C. 350b unless it has been present in the food supply in a form in which the food has not been chemically altered. The supplier states the basis; the buyer checks that it extends to the finished product. Dietary supplement manufacturing is covered by 21 CFR 111, and the Supplement Facts panel by 21 CFR 101.36. Egg is a major food allergen under the Food Allergen Labeling and Consumer Protection Act, so the finished label has to declare it. A structure/function statement is the brand's responsibility; no disease claim is open. There is no federal maximum level for lead in dietary supplements. A customer specification, a state rule such as California Proposition 65, or USP <2232> may set the panel. The destination and the daily dose have to be checked together. ## The contaminant and microbiological table Limits to confirm for the finished product · eggshell membrane collagen | Parameter | EU supplement reference | US federal position | File should show | Lead (Pb) | 3.0 mg/kg | No federal limit specific to supplements; state rules apply | Lot result, method, limit and dose calculation | Cadmium (Cd) | 1.0 mg/kg | No federal limit specific to supplements | Lot result and any category exception | Mercury (Hg) | 0.10 mg/kg | No federal limit specific to supplements | Lot result and method | Arsenic (As) | Not harmonised; member state rules may apply | No federal limit specific to supplements | The agreed limit and the method | Microbiology | Specification and customer criteria | Current good manufacturing practice | APC, yeast and mould, E. coli and Salmonella absence The EU figures come from Regulation (EU) 2023/915 and apply to food supplements as sold; an ingredient sold to a food manufacturer is assessed against the limit for the food category it enters. The catalogue panel matches those figures for lead, cadmium and mercury, and sets arsenic at ≤2 mg/kg; the EU has no harmonised figure for this category. Salmonella absence is the line that cannot be traded away. ## Claims and label language No disease-related claim is permitted for a food or a food supplement in the EU, the US or the UK. Protein claims are regulated separately: the EU conditions in Regulation (EC) No 1924/2006 apply to the food as sold, and US protein claims follow 21 CFR 101.54 and the serving. In the EU, a health claim about eggshell membrane collagen would need an authorisation under Regulation (EC) No 1924/2006; as of this review no collagen-peptide health claim is authorised, so the label should stay with the nutrient content and the ingredient description. In the US, a structure/function statement is the brand's responsibility and must be substantiated. This site makes neither claim. The egg declaration is not a claim and cannot be left off for marketing reasons. A product described as “egg-free” while it contains a membrane hydrolysate is mislabelled. ## The document pack - Batch COA with protein and its factor, peptide content, molecular weight, loss on drying, ash, heavy metals, microbiology and mesh. - Specification and data sheet naming the membrane source, hydrolysis process and peptide distribution. - Safety data sheet in the 16-section format. - Egg allergen statement for the material and every carrier or processing aid. - Hydrolysis enzyme declaration, with source and carrier. - Origin, non-GMO, and halal or kosher statements where available. - Novel-food or new-dietary-ingredient route statement, where required, and the microbial kill-step validation. The allergen statement is a document, not a sentence on the COA. It should name egg and cover the finished product, including any carrier that carries egg or is handled on a shared line. The COA page lists the release tests, the identity page covers the source evidence, and the EU and US regulatory notes collect the framework references. ## What to check before the first order - Is the material named as hydrolysed eggshell membrane collagen, with source and CAS? - Does the allergen statement cover egg, the enzyme and every carrier? - Has the destination route been confirmed for the exact material, process and use? - Are the contaminant results converted to the finished-product dose, including state rules? - Is there a validated kill step and a Salmonella absence result for the lot? - Is every label statement a nutrient claim, a documented structure/function statement or a required allergen declaration? - Do the quotation, specification, COA and allergen statement refer to the same version? The product page carries the catalogue specification, and the quality page describes how the release file is assembled. ### 06 How to prove a lot is eggshell membrane collagen URL: https://nutrition.rainwoodbio.com/products/protein-collagen/eggshell-membrane-collagen/identity/ Reviewed: 2026-11-20 An eggshell membrane collagen lot is proved by four agreeing lines: protein by Kjeldahl with the collagen factor, a peptide distribution by SEC-HPLC, an ash and calcium figure that shows how much shell came with the membrane, and an egg-specific source check. The protein figure alone is not identity; a nitrogen-rich powder can be diluted or blended. The membrane source is part of the identity because egg is an allergen. In one lineIdentity is four agreeing measurements: protein with its factor, the peptide distribution, the ash from the shell side, and the egg source behind the declaration. ## The four layers The layers are cumulative. The first answers whether the material is a collagen hydrolysate at all, the second describes what the hydrolysis did to it, the third describes what the membrane separation left behind, and the fourth answers the label question. A certificate that stops at the protein figure has covered the first layer, and only part of the second. Four identity layers · eggshell membrane collagen | Layer | Test | Question answered | Composition | Kjeldahl protein, hydroxyproline | Is the nitrogen collagenous? | Peptide size | SEC-HPLC | How far has the membrane been cut? | Mineral load | Ash, calcium, XRD of the ash | How much shell came with the membrane? | Source | Egg-specific PCR and a source declaration | Is the material egg-derived? ## Hydroxyproline against the protein figure Hydroxyproline is the amino acid marker for collagen, and eggshell membrane collagen carries it while plant, milk and whey proteins do not carry it in significant amounts. A result above a few percent is therefore the first sign that the nitrogen is collagenous rather than added. The figure is only useful as a ratio to the protein result; neither number stands alone. The ratio has to be read against the source. Eggshell membrane carries collagen types I, V and X, but it also carries egg white proteins and other membrane proteins, so the collagen share of the total protein is lower than in a hide collagen. A membrane hydrolysate therefore sits at a lower hydroxyproline-to-protein ratio than a bovine hide peptide, and the two should not be judged against the same band. The catalogue sets protein and peptide minimums rather than a hydroxyproline range; hydroxyproline is a supporting identity test, and it is the first test to add when the protein figure is disputed. The factor and the basis are part of the ratio. The catalogue uses N × 5.55, the collagen convention, and the certificate must say whether the 90.0% is on the dry basis or as-is. At the 7.0% loss-on-drying limit, a 90.0% dry-basis figure is about 83.7% as-is. A hydroxyproline percentage without the protein figure, the factor and the basis cannot be interpreted. ## X-ray diffraction and the mineral side Collagen is amorphous, so XRD adds no identity line for the protein: the scan shows a broad halo, and the hydroxyproline marker is measured by an amino-acid method. XRD enters on the mineral side. The membrane sits against a calcium carbonate shell, and ashing a lot that carries shell fragments leaves a calcite pattern. A cleanly separated membrane leaves much less of it. Two limits keep the test in its place. It reads crystalline phases, not collagen, and a washed membrane can lose most of its calcite before the test. It will also show a crystalline filler such as calcium carbonate or a mineral excipient, which ash alone cannot name but calcium by ICP-OES and the mass balance can. On a routine certificate, XRD is a request item, not a release line. XRD cannot separate egg collagen from bovine or fish collagen. That question belongs to the source layer, and it is answered by an egg-specific PCR method or a documented source audit, not by a mineral pattern. ## The adulteration routes Adulteration routes and the test that shows them | Route | What moves | Test | Shell powder or calcite | Ash and calcium rise; protein falls | Ash, calcium by ICP-OES, XRD of the ash | Non-collagen protein | Protein holds; hydroxyproline falls | Amino acid profile, hydroxyproline ratio | Bovine or fish collagen | Protein and hydroxyproline look normal | Egg-specific PCR; source audit | Gelatin | Peptide content holds; a high-molecular-weight shoulder appears | SEC distribution curve | Maltodextrin or starch | Protein and peptide fall | Mass balance, carbohydrate The amino acid profile is the most informative single test after hydroxyproline. Egg membrane protein includes non-collagen fractions, so the profile should be compared with an egg membrane reference, not with a pure hide collagen. A profile that looks like whey or soy is carrying protein from somewhere else. Egg-specific PCR then answers the source question, and it is the test that turns a membrane claim into a document. ## What to write into the specification A second laboratory should be able to reproduce the identity decision from the specification alone. One workable set of lines: hydrolysed eggshell membrane collagen, CAS 9007-34-5 (source-defined); protein ≥90.0% by Kjeldahl with N × 5.55, basis stated; peptide content ≥80.0% by SEC-HPLC; molecular weight ≥80% below 3,000 Da with the distribution reported; hydroxyproline reported as a supporting marker; loss on drying ≤7.0%; ash ≤5.0% with calcium reported; ≥95% through 80 mesh; heavy metals and microbiology as on the COA page; source eggshell membrane; hydrolysis enzyme and origin declared; egg allergen statement attached. The source and the mineral lines are the ones most often left out. Without them, a certificate cannot distinguish a clean membrane preparation from one that carries shell, and the compliance page explains why that distinction reaches the label. ## Five questions to put to a supplier - Which membrane preparation and which separation step is the lot, and what is the ash and calcium result? - What is the protein result on this lot, with which factor, on which basis, and what is the hydroxyproline figure? - Can you send the SEC distribution curve, with the column and the calibration used? - Which egg-specific test supports the source declaration, and can the allergen statement be issued for this lot and this site? - Which enzyme carries out the hydrolysis, and what is its source and carrier? The answers belong in the specification file, not only in the email. The product page carries the catalogue ranges; the methods library describes the assays; the quality page describes the retained sample and the release file. ### 01 Reading a magnesium bisglycinate hydrate COA URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-bisglycinate-hydrate/coa/ Reviewed: 2026-11-20 A magnesium bisglycinate hydrate certificate has to be read as a pair of numbers, not one. The magnesium result says how much of the element the powder carries; the loss-on-drying result says how much of that powder is water. The catalog sets magnesium at 11.0–12.5% by complexometric titration, loss on drying at 8.0–14.0%, and the Mg : glycine ratio at 1:2 with glycine by HPLC. The basis must be stated beside the magnesium figure. In one lineOn a hydrate certificate the magnesium figure and the water figure must be read as a pair: 11.0–12.5% Mg beside 8.0–14.0% loss on drying is the grade, and either number alone is not. ## What the one-page certificate reports Every line should carry the parameter, the method, the release limit and the measured result in its own column. A certificate that reports only “conforms” asks the buyer to accept a conclusion without evidence, and the same magnesium figure can come from a chelate, a blend or a drier grade. Release tests · magnesium bisglycinate hydrate | Test | Method | Limit | Appearance | Visual | White to off-white, free-flowing powder | Identification | Glycine by HPLC and magnesium by titration | Both conform to the reference | Magnesium (Mg) | Complexometric titration | 11.0–12.5% | Glycine | HPLC | Consistent with the 1:2 molar ratio | Mg : glycine ratio | Calculated from the two assays | 1 : 2 molar | Loss on drying | Gravimetric | 8.0–14.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Aerobic plate count; absence tests | Aerobic count ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh The particle-size line is a finishing specification: changing the mill or the sieve can move it while the chemistry stays the same. Microbiology is a second block, with the count and the absence result for that lot, and the lot code should match the pouch, the drum and the retained sample. ## As-is, dried basis and the hydrate name An as-is figure takes the powder as weighed; a dried-basis figure divides by the dry matter and reports what the solids would contain without water. The catalog magnesium range here is as-is, because the water is part of the material being sold. The conversion is easy to get wrong. A lot at 11.8% magnesium as-is beside 10.0% loss on drying calculates to 11.8 ÷ 0.90 = 13.1% on the dried basis. That is arithmetic, not a batch result. The powder is still the hydrate, and the as-is figure sets the fill weight. Comparing 13.1% dried basis with the 13.5–14.2% anhydrous range makes the two materials look closer than they are. The word “hydrate” alone does not fix the water. The catalog window, 8.0–14.0% loss on drying, is wider than a single stoichiometric hydrate. The certificate should report the measured water and magnesium, and the technical data sheet should name the grade; a percentage such as “98%” without a basis is not a substitute. ## Release limit, batch result and the ratio The release limit is the boundary the lot must fall inside; the batch result is what the laboratory measured. They belong in separate columns with the method beside them. “Passes specification” is a conclusion; the numbers are the evidence. What the result column should show | Parameter | Release limit | Result column | Magnesium | 11.0–12.5% as-is | A measured percentage, with the method and the basis | Loss on drying | 8.0–14.0% | A measured percentage on the same sample | Glycine and ratio | 1 : 2 molar | The glycine result and the calculated ratio | Heavy metals | Per element | A figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence result for that lot Two released lots can still differ in magnesium per gram by about 14%, because one may sit at 12.5% magnesium with 8.0% water and the other at 11.0% with 14.0%. That is the width of the grade, not a quality failure; the fill weight comes from the certificate result, not the catalogue midpoint. The catalog does not set a free-glycine limit on this grade; it can be added as a separate line. The magnesium window limits how much oxide could be present but does not prove absence, so an oxide screen is a separate request, with its detection limit stated. ## What moves between batches The drying and hydration steps move loss on drying, and the as-is magnesium figure moves the other way. A lot that has picked up water shows higher loss on drying and lower magnesium, while the chelate itself is unchanged; a lot dried harder moves in the opposite direction. Read the two trends together. The glycine result and ratio should stay close to 1:2. A drift away from 1:2 is more serious than a small colour difference: it suggests added glycine, a second magnesium source or a different reaction product. Particle size follows milling, and bulk density follows shape and moisture. Colour is the least quantitative line; a tan tint within the off-white window should prompt a batch-record review, not an automatic rejection. A run of lots is more informative than a single result close to a limit. Magnesium drifting down while loss on drying climbs points to moisture pickup; magnesium drifting up while loss on drying falls points to over-drying or a different hydrate. Either changes the fill weight even when every lot is in specification. ## When to order an outside test An independent test is worth ordering for a new source, a first regulated shipment, a disputed hydrate state, or a label claim the certificate does not prove. The useful panel is magnesium by titration or ICP-OES, water by loss on drying or Karl Fischer, glycine by HPLC, a phase check by XRD or TGA, ICP-MS for the heavy metals and the microbiology block. Ask for the detection limit of each screen; a “not detected” line without a limit describes the method, not the sample. Keep the tested sample and the retained sample from the same pack, and make the report identify the lot. A contested result needs the retained sample, the certificate, the specification and the tests that separate the hydrate from the anhydrous grade, not a repeat of the same magnesium assay. ## Comparing quotations line by line Compare six lines across suppliers: the product name, hydrate statement and CAS number; the magnesium result and its basis; loss on drying; glycine and the calculated ratio; particle size and heavy metals; and the lot code linking certificate, pack and retained sample. Two quotations that agree on magnesium but differ on water are not the same grade. The catalog specification is on the hydrate product page. The other grade is on the anhydrous page; the water and fill arithmetic is on the anhydrous versus hydrate comparison. Analytical methods are in the methods library, and the release workflow is on the quality page. ### 02 Hydrate, anhydrous or granulated: choosing a magnesium bisglycinate grade URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-bisglycinate-hydrate/grades/ Reviewed: 2026-11-20 Magnesium bisglycinate hydrate is a grade, not a synonym for every magnesium glycinate powder. The catalog hydrate carries 11.0–12.5% magnesium and 8.0–14.0% water, while the anhydrous chelate is a separate product at 13.5–14.2% magnesium. Buffered blends, granulated powders and finer mesh are further choices within the same family. The grade is settled by the fill weight, the dosage form and the ingredient name the label has to use. In one lineThe hydrate grade is a window, not a single molecule: 11.0–12.5% magnesium with 8.0–14.0% water, specified and weighed as a pair. ## Why one name covers several powders Three variables sit behind the name magnesium bisglycinate: how much water the powder carries, how the powder is presented, and whether a second magnesium source is in the drum. The magnesium percentage reflects all three at once, so it cannot explain them. A hydrate at 12.0% magnesium and an anhydrous chelate at 14.1% are both the 1:2 chelate, but they are different products with different fill weights. The hydrate window adds a second layer. The catalog covers 8.0–14.0% water, which is wider than a single stoichiometric hydrate; two released lots can sit at different points in that window and still be the same grade. The grade is the pair of results on the certificate, not the word “hydrate” on its own. ## How the grades compare Hydrate grade family · magnesium, water and fit | Grade | Magnesium | Water | Fits | Watch | Anhydrous chelate | 13.5–14.2% | Separate moisture limit; not the hydrate window | Capsules and tablets with a tight fill | Hygroscopic; confirm the pack and the in-use period | Hydrate, catalog grade | 11.0–12.5% | 8.0–14.0% loss on drying | Capsules, tablets, sticks and blends | Fill weight follows the lot result | Monohydrate reference | About 12.8% | About 9.5% | Reference point, not a catalog grade | Magnesium above the catalog ceiling | Dihydrate reference | About 11.7% | About 17.3% | Reference point, not a catalog grade | Water above the catalog window | Buffered blend | Often above 14% | Varies with the blend | Projects that need a higher magnesium figure | Not a single chelate; the label names both sources | Granulated hydrate | Same as the base grade | Same as the base grade | Tablets and sachets that need flow | Granulation aids belong in the specification | Milled hydrate | Same as the base grade | Same as the base grade | Capsules and suspensions | Dust, caking and blend segregation The monohydrate and dihydrate rows are reference points from the formula, not products on this catalog page. They show why the hydrate window is broad: a monohydrate sits near 12.8% magnesium and 9.5% water, while a dihydrate sits near 11.7% magnesium and 17.3% water. The catalog hydrate does not promise either formula exactly; it promises a magnesium result and a water result inside the two ranges. ## What changes in the drum The hydrate is a white to off-white powder, soluble in water to a clear or slightly opalescent solution. Its catalog particle size is ≥95% through 80 mesh, finer than the 40 mesh of the anhydrous grade, so a capsule blend may flow differently and a tablet blend may need granulation. Bulk density is not set in the catalog for this grade; ask for the measured value on the lot rather than assuming it from the mesh. Water is part of the product, not an impurity to be removed. A powder at the top of the water window carries less chelate per kilogram than one at the bottom, so the same volume of powder delivers less magnesium. Drying a hydrate lot to raise its magnesium percentage is not a correction; it changes the grade and should be handled as a new specification. The powder is hygroscopic in the open, and caking is the visible result of moisture pickup. ## What changes in the finished product For capsules, fill weight is the constraint. At 11.75% magnesium, a 500 mg capsule carries about 59 mg of elemental magnesium, so a 100 mg label dose takes two capsules before excipients. At the bottom of the range, 11.0%, the same 100 mg takes 909 mg of powder; at the top, 12.5%, it takes 800 mg. The capsule count can change at the edge of the grade even though the specification has not changed. For tablets, the 80 mesh powder may need granulation to run on the press, and the granulated grade must declare any granulation aid. For sticks and drink mixes, the hydrate dissolves readily; a 200 mg magnesium dose is about 1.6–1.8 g of powder, which is a visible part of a stick's fill weight. For gummies and chews, the water the hydrate brings is part of the matrix's water activity, and the process temperature has to be checked against the glycine in the formula. None of these decisions is made by the certificate. Only a bench trial with the shipping grade shows the flow, the taste and the fill. ## What to write into the specification - “Magnesium bisglycinate hydrate, 1:2 magnesium–glycine chelate, CAS 14783-68-7.” - “Magnesium 11.0–12.5% by complexometric titration, as-is.” - “Loss on drying 8.0–14.0%; the hydrate state stated on the COA and the TDS.” - “Glycine by HPLC; Mg : glycine ratio 1 : 2 molar.” - “Appearance white to off-white; particle size ≥95% through 80 mesh.” - “Heavy metals and microbiology as listed on the product specification.” - “No undeclared magnesium source; an oxide screen on request, with its detection limit.” A line that says only “magnesium glycinate 12%” leaves the water, the ratio and the physical form open. The grade table is useful only when the certificate repeats the same definitions. ## When another grade is the better buy If the capsule fill is already tight, the anhydrous grade earns its place because it carries more magnesium per milligram of powder. If the label names the anhydrous chelate, the hydrate is not a drop-in, even when both are inside their magnesium ranges. If the project needs a higher magnesium figure than the chelate can carry, a buffered blend may be the answer, but the label then has to name the second magnesium source. Granulation is not an upgrade for a capsule blend that already flows, and milling finer will not help a tablet blend that needs density. A grade should answer a constraint that the dosage form really has. The hydrate product page carries the catalog specification; the anhydrous grade has its own page; the water and fill arithmetic is set out on the anhydrous versus hydrate page; the methods are in the methods library; the release process is on the quality page. ### 02.1 Anhydrous vs hydrate magnesium bisglycinate: water, magnesium and fill weight URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-bisglycinate-hydrate/grades/anhydrous-vs-hydrate-magnesium-bisglycinate/ Reviewed: 2026-11-20 The anhydrous and hydrate grades are the same 1:2 magnesium–glycine chelate with different amounts of water. The anhydrous grade carries 13.5–14.2% magnesium, about 14.1% at the theoretical formula; the hydrate carries 11.0–12.5% magnesium and 8.0–14.0% water. For a 100 mg elemental magnesium dose, the hydrate needs 800–909 mg of powder against about 709 mg of the anhydrous grade, so the fill weight, the capsule count and the water the formula receives all change. In one lineThe two grades differ by water: the anhydrous chelate carries about 14.1% magnesium, the hydrate 11.0–12.5%, so the same label dose needs roughly 13–28% more hydrate powder. ## Two grades, one CAS number Both catalog records carry CAS 14783-68-7, so the certificate name, the magnesium result and the water result are what separate the grades. A purchase order that names only the CAS number has not chosen a grade. Anhydrous and hydrate magnesium bisglycinate | Property | Anhydrous grade | Hydrate grade | Catalog magnesium | 13.5–14.2% | 11.0–12.5% | Water | Separate moisture limit | 8.0–14.0% loss on drying | Theoretical magnesium | About 14.1% | About 12.8% as a monohydrate, 11.7% as a dihydrate | Formula | C4H8MgN2O4 | C4H8MgN2O4·xH2O | Particle size | ≥95% through 40 mesh | ≥95% through 80 mesh | Appearance | White to off-white crystalline powder | White to off-white powder | Label name | Magnesium bisglycinate | Magnesium bisglycinate hydrate The formula row explains the chemistry and the label row the commercial decision. The hydrate is not a diluted anhydrous powder; it is a hydrate of the same chelate, sold as its own grade, and the two names are not interchangeable. ## The magnesium figure per gram Magnesium is 24.305 g/mol and the anhydrous chelate 172.42 g/mol, so the theoretical content is 14.10%. The catalog range 13.5–14.2% brackets that value, and a kilogram carries about 135–142 g of elemental magnesium. The hydrate carries less magnesium per kilogram because water adds mass without adding the element. At 11.0–12.5% magnesium, a kilogram carries 110–125 g. Against the 14.1% theoretical anhydrous figure, the same magnesium dose needs about 13% more hydrate powder at 12.5% magnesium, about 28% more at 11.0%, and about 20% more at the 11.75% midpoint. The comparison is only valid on the same basis. The hydrate's 11.0–12.5% is as-is. Convert a dried-basis result back before comparing: 11.8% as-is beside 10.0% loss on drying is 13.1% dried basis, still the hydrate. The as-is figure sets the fill. ## What the water does to the mass Water is 8.0–14.0% of the powder by the loss-on-drying limit. In a 100 mg magnesium dose that is roughly 64–127 mg of water. In a low-moisture tablet or gummy, that water is part of the matrix's water activity and drying step, even though the ingredient is sold dry. The water also widens the grade. Two released lots can differ by about 14% in magnesium per gram: one at 12.5% magnesium with 8.0% water, another at 11.0% with 14.0%. Size the fill from the certificate result for the lot that will ship, not the catalogue midpoint. The hydrate is closer to its equilibrium water content than the anhydrous grade, which has an empty hydration site and takes water readily. That does not make the hydrate safe in an open room: it is still hygroscopic, it still cakes, and the pack still has to be sealed. Loss on drying measures crystal water and surface moisture; thermogravimetric analysis separates the two when the hydrate state is disputed. ## The fill arithmetic The label declares elemental magnesium; the weigh-up uses powder. Divide the declared dose by the magnesium fraction on the certificate. The table uses the theoretical anhydrous figure and three hydrate points, before excipient. Powder needed for a declared magnesium dose · mg, before excipients | Declared magnesium | Anhydrous at 14.1% | Hydrate at 11.0% | Hydrate at 12.5% | Hydrate at 11.75% | 50 mg | 355 mg | 455 mg | 400 mg | 426 mg | 100 mg | 709 mg | 909 mg | 800 mg | 851 mg | 200 mg | 1,418 mg | 1,818 mg | 1,600 mg | 1,702 mg In a capsule, the count follows. A 500 mg capsule of hydrate at 11.75% carries about 59 mg, so a 100 mg dose takes two capsules; the anhydrous grade fits about 70 mg, so it also takes two but has more room. A one-capsule 100 mg dose needs an 800–909 mg hydrate fill, a larger capsule or another dosage form. For tablets, the extra 13–28% becomes compression weight, and the 80 mesh hydrate may need granulation. For a stick pack, the extra mass shows in net weight and scoop size; for a gummy, it brings the water discussed above. The arithmetic is the same; only the constraint changes. ## What the label and the specification must say The label has to name the grade that was weighed. For the hydrate, the declaration should identify magnesium bisglycinate hydrate, with elemental magnesium declared as the nutrient. In the US Supplement Facts the source is named in parentheses, for example “magnesium (as magnesium bisglycinate hydrate)”; in the EU ingredient list the hydrate description belongs with the ingredient name. The buyer's regulatory team confirms the wording. The specification should carry the same two figures: magnesium 11.0–12.5% as-is and loss on drying 8.0–14.0%, with the 1:2 ratio. It should state the hydrate in the product name, because the CAS does not distinguish it. A switch between grades changes fill weight, label and stability work; it is a new specification, not a substitution at the balance. ## When each grade earns its place Choose the anhydrous grade when fill is the binding constraint, the formula has no room for the extra mass, or the label names the anhydrous chelate. It carries more magnesium and no crystal water, but it is more hygroscopic and needs a dry pack. Choose the hydrate when the fill has room for 13–28% more powder, the matrix can accept the water, and the label names the hydrate. It is the grade specified on this page. Neither grade is a diluted version of the other; they are separate catalog items. The catalog specification is on the hydrate product page; the other grade on the anhydrous page; the release tests on the COA page; the analytical methods in the methods library; the release workflow on the quality page. ### 03 Magnesium bisglycinate hydrate: holding the water window URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-bisglycinate-hydrate/stability/ Reviewed: 2026-11-20 The hydrate is stable while its pack stays sealed; the change to watch after opening is water. Loss on drying can drift inside or beyond the 8.0–14.0% window, and because magnesium is reported as-is, that drift moves the magnesium figure without any change in the chelate. In a finished formula, heat with a reducing sugar, a shift in pH and the water activity of the matrix are the other variables that decide how long the material keeps. In one lineThe hydrate's stability question is water: a sealed pack holds the 8.0–14.0% window, while an open one lets loss on drying drift and the magnesium figure move with it. ## The dry powder and its water window In the unopened pack the powder is a crystalline solid at ambient temperature, and the chelate itself does not decompose on storage. The release window is 8.0–14.0% loss on drying, and the magnesium range of 11.0–12.5% is tied to that window. Water is part of the grade, not a defect that storage is meant to remove. Once the liner is opened, the powder equilibrates with the room. In a humid store it gains water: loss on drying rises, the as-is magnesium percentage falls, the particles stick together and the flow changes. In a very dry room the opposite can happen, and a lot near the top of the water window can lose surface moisture. Neither move is a chemical degradation, but both change the mass that carries the magnesium and therefore the fill weight. The practical controls are a sealed food-grade liner, a desiccant where the climate requires one, and a closing routine between weighings. Folding the top of an opened pouch is not the same as a heat-sealed closure. Do not dry a lot to force its magnesium figure into range; drying changes the hydrate and should be handled as a new specification, not as a warehouse correction. ## In solution The hydrate dissolves in water to a clear or slightly opalescent solution. In solution the chelate is exposed to heat, pH and other minerals at once. A matrix that is far from the chelate's own pH can change solubility, taste and the equilibrium between the chelate and free glycine. A soluble second mineral can compete for the ligand, and the result may show as haze or a colour shift before any assay moves. Heat drives the reaction between glycine and reducing sugars. A glucose syrup or a reducing-sugar carrier plus a hot process is the combination that browns a batch; removing the reducing sugar or lowering the process temperature takes away one side of the reaction. The effect may show in colour and taste before it appears in the magnesium result, so test the real matrix at its real pH and process temperature rather than checking solubility in water at room temperature. ## What drives the change Stability factors · magnesium bisglycinate hydrate | Factor | Effect | Control | Humidity | Loss on drying rises; as-is magnesium falls; caking | Sealed liner, desiccant, dry handling | Very dry air | Surface water lost; loss on drying falls | Keep the pack closed; do not over-dry | Heat | Speeds glycine–sugar browning | Cooler process; dry blend | pH shift | Solubility, taste and ligand exchange | Buffer and trial the final matrix | Trace metals | Colour and ligand exchange in a wet mix | Set iron and copper limits | Compaction | Caking and density change in the hopper | Controlled storage; granulate if needed These factors interact. A warm, humid store is worse than either condition alone, and a wet blend at the wrong pH combines water, heat and ligand exchange. The useful question is not whether the hydrate is stable in general, but which pack, which matrix and which storage condition the claim refers to. ## A stability protocol for the ingredient The bulk study keeps the powder in its commercial pack at 25 °C/60% relative humidity and 40 °C/75% relative humidity. Test points are 0, 3, 6, 12 and 24 months, with magnesium, water, glycine ratio, appearance, pH where relevant and microbiology at every point. The warm leg is a stress condition, not a storage instruction; it exists to make a trend visible inside the study window. The finished-product study runs alongside it. The capsule, tablet, stick or gummy goes into its own pack at 30 °C/65% and 40 °C/75% relative humidity and is tested for magnesium, moisture, colour, taste and, where relevant, dissolution. A bulk powder can pass while the finished product fails, and the finished product is what carries the date. For a gummy or a chew, water activity belongs in the panel as well as loss on drying. ## How the finished formula changes the answer In a capsule or tablet, the dosage form shields the powder, and the remaining risks are moisture and the excipients. If the blend carries a reducing sugar, keep the process cooler and watch water activity. Granulation changes the particle surface, so the lubricant may need revisiting. In a stick pack, the seal is the protection. Start with a foil laminate, a continuous seam and a low moisture-vapour transmission rate; a clear or paper format needs its own supporting data. In a gummy or chew, the result is governed by pH, water activity and the sugar system, and the water the hydrate itself brings is part of that balance. In a beverage, pH and preservation matter more than the mesh; a clear drink needs full dissolution at the final pH. ## How the shelf life is set The shelf life is a conclusion from stability data on the grade and the pack, not a fixed number attached to the name. The technical data sheet should give the storage condition and the retest or expiry period backed by the study. A bulk ingredient that is re-tested before use can carry a retest period; a consumer pack needs a date the buyer can read. Where the pack or the matrix has not been studied, the defensible answer is a shorter period or a new study. A figure borrowed from another pack proves nothing about this pouch, drum or stick. The hydrate product page lists the standard packs; the anhydrous grade has a different water profile and its own data; the COA page lists the release tests that are repeated over time; the methods library describes the assays, and the quality page explains how the data are kept. ### 04 Magnesium bisglycinate hydrate: MOQ, packs and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-bisglycinate-hydrate/moq/ Reviewed: 2026-11-20 This hydrate grade ships from a 1 kg foil pouch; the production unit is a 25 kg fiber drum, and standard dispatch is quoted at 1–7 days after the order is confirmed. The quantity question differs from the anhydrous grade's, because at 11.0–12.5% magnesium a kilogram supplies 110–125 g of the element. At a 100 mg label dose, one pouch therefore covers about 1,100–1,250 servings before excipients. In one lineOne kilogram is the trial unit, and because the hydrate carries 11.0–12.5% magnesium the same pack delivers fewer milligrams than the anhydrous grade. ## Why the first pack is one kilogram A kilogram is enough for a bench trial, a retained sample and an independent test, and it is small enough to move as a parcel. It also arrives as a released lot with its own code and certificate. Below that size the material is normally taken from a larger lot, which adds handling and weakens the link between the certificate and the powder in the bag. The yield per pack is lower than the anhydrous grade's. One kilogram of hydrate at 11.0–12.5% magnesium carries 110–125 g of the element; one kilogram of the anhydrous grade at 13.5–14.2% carries 135–142 g. A 25 kg drum follows the same arithmetic: 2.75–3.125 kg of magnesium in the hydrate drum against 3.375–3.55 kg in the anhydrous drum. The container is the same size; the number of doses is not. That is why the order quantity should be calculated from the label dose and the certificate result. If a production run needs 10 kg of the anhydrous powder, the same magnesium load needs roughly 11.3–12.8 kg of hydrate, depending on where the lot falls in the water window. The comparison belongs in the quotation, not in the first production batch. ## Packs and formats Standard packs · magnesium bisglycinate hydrate | Pack | Net weight | Typical use | Handling note | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; close it between weighings | Fiber drum | 25 kg | Production | Liner and lot code; keep the liner closed | Granulated powder | On request | Tablets and sachets | New particle profile and any granulation aid The catalog powder is specified at ≥95% through 80 mesh. A granulated version is a new specification rather than a packing choice, because the particle profile and possibly the excipients change. Both standard packs need a sealed liner: the hydrate is hygroscopic, and the pouch is a moisture barrier only while it is closed. ## Dispatch and transit The standard pack is quoted at 1–7 days after confirmation. That window covers order picking, document preparation and handover to the carrier; transit, customs clearance and the customer's own quality release sit outside it. A non-standard mesh, a granulation or a repack adds its own time, which the quotation should show as a separate line. Ask for the ship date rather than the range alone. A single pouch usually travels as a parcel and a 25 kg drum as a pallet, while the Incoterm decides who books the movement and who clears entry. The lot documents should be in the same shipment as the powder. If the material is needed for a production date, add the customer's release time to the plan as well as the transit time. ## What a quotation needs Six details make an offer comparable: - Grade and identity. Magnesium bisglycinate hydrate, CAS 14783-68-7, with the hydrate named in the description. - Release specification. Magnesium 11.0–12.5% as-is, loss on drying 8.0–14.0%, the 1:2 ratio, mesh and contaminant panel. - Order size and presentation. The 1 kg pouch, the 25 kg drum, or a granulated grade. - Delivery. Destination and Incoterm. - Paperwork. COA, specification and technical data sheet, SDS, and any destination-specific declaration. - Use and market. Supplement, food or another use, and the country of sale. An offer that omits the hydrate name and the water limit may be for the anhydrous grade, since both catalog records carry the same CAS number. The quotation should also cite the specification revision, so the certificate and the offer can be checked against one document. ## The 1 kg pack is the qualification unit Before scaling, test magnesium, loss on drying, glycine and the ratio, the heavy metals and the microbiology on the sample. Keep part of the same pack as a retained sample, and make sure the lot code on the sample, the certificate and the quotation agree. Without that link, the powder is a demonstration rather than a qualification. A bench trial that uses less than a kilogram is a repack. It comes out of a bulk lot, receives its own handling record, and should not be described as the catalog pouch. Ask for the split in writing and keep the split lot code with the trial data. Even with an identical specification, the trial powder and the production drum can come from different lots. ## Terms to settle before the first order Put the commercial and quality terms in one document: Incoterm, pack, dispatch window, specification revision, one COA per lot, the retained sample, the retest period and the change-control route. A quality agreement signed before the first production order is easier than a negotiation after a problem. If a lot falls outside the agreed specification, the first step is a joint re-test of the retained sample against the named method. The agreement should name the referee laboratory and say who carries its cost. A rejection based only on colour is difficult to support for either side, because the off-white window is wide and drying can shift the tint. The hydrate product page carries the catalog specification; the anhydrous grade is a separate purchase; the COA page lists the release tests; the methods library describes the assays; the quality page describes the release file. ### 05 The regulatory file for magnesium bisglycinate hydrate URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-bisglycinate-hydrate/compliance/ Reviewed: 2026-11-20 The compliance file for magnesium bisglycinate hydrate has to connect one specification to four destination questions: whether the form is on the permitted list, whether the contaminants fit the limit at the finished dose, whether the label names the hydrate correctly, and whether the claims are authorised. The catalog material is a 1:2 magnesium–glycine chelate at 11.0–12.5% magnesium with 8.0–14.0% water, and that hydrate description has to survive from the technical data sheet to the label. The buyer's regulatory team confirms the route for the destination; this page names the framework and the documents. In one lineThe specification describes a magnesium chelate hydrate; the destination file has to show the permitted-list entry, the contaminant calculation and the label wording that apply. ## Four checks and one file The first check is the ingredient identity: magnesium bisglycinate, 1:2 chelate, hydrate grade, CAS 14783-68-7. The second is the permitted-list route in the destination market. The third is the contaminant calculation, which starts from the lot result and ends at the finished dose. The fourth is the label and claim review, which belongs to the brand that puts the product on the market. The file that supports those checks contains the specification and technical data sheet, the batch certificate, the safety data sheet, the source and process description, the allergen, GMO, origin and residual-solvent declarations, the label artwork and the buyer's written confirmation of the destination route. None of those documents decides the route on its own; together they show that the material and the market file describe the same product. ## European Union In the EU, the route for a magnesium source in a food supplement runs through the permitted lists of Directive 2002/46/EC and the national notification procedure that sits alongside it. The buyer's regulatory team confirms which entry applies and whether the hydrate description matches the named substance. The specification should use the same name as the market file, so that the certificate and the label do not describe two different materials. On top of the permitted-list question, Regulation (EU) No 1169/2011 governs the food information and the ingredient list, Regulation (EU) 2023/915 sets the contaminant limits, and Regulation (EU) No 432/2012 governs the authorised magnesium claims. These texts can change, so the current consolidated version is the reference as of this review. The analytical methods behind the certificate are described in the methods library; the quality page explains how the lot file is assembled. ## United States In the US, the question is whether the exact form is a lawful dietary ingredient under DSHEA. Magnesium is an essential nutrient, but that fact alone does not establish the status of a particular chelate. The supplier documents the basis it relies on, whether that is a pre-DSHEA use, a GRAS conclusion for the intended use, or a new dietary ingredient notification, and the buyer checks that the basis extends to the finished product. The label follows the Supplement Facts format in 21 CFR 101. The panel declares elemental magnesium against the Daily Value, and the source is named in parentheses, for example “magnesium (as magnesium bisglycinate hydrate)”. A structure/function statement belongs to the brand, needs substantiation, and has to carry the DSHEA disclaimer. The buyer's regulatory team confirms the wording; the certificate does not approve a claim. ## Contaminants and the finished-product calculation The contaminant limit applies to the product as sold, not to the drum in isolation. The lot result has to be converted through the dose. A 100 mg elemental magnesium dose at 11.75% magnesium is about 851 mg of powder; at a lead limit of 3.0 mg/kg, that powder can contribute at most about 2.55 µg of lead before the excipients add their share. The calculation, not the certificate alone, shows whether the finished product fits. Contaminant references to confirm · food supplements | Element | EU reference | US reference | UK reference | Lead | 3.0 mg/kg | No supplement-specific federal limit; state rules may apply | Retained EU figure; verify current UK law | Cadmium | 1.0 mg/kg | No supplement-specific federal limit | Retained EU figure; verify current UK law | Mercury | 0.10 mg/kg | No supplement-specific federal limit | Retained EU figure; verify current UK law | Arsenic | Not harmonised at EU level; a Member State may set its own figure | No supplement-specific federal limit | Verify current UK law California Proposition 65 is a separate layer: a supplement inside the EU figure can still need a California warning at a low daily intake. Destination, daily dose and excipient load have to be checked together. The numbers above are a starting point for the file, not legal advice, and the current text of each instrument is the reference. ## Claims In the EU, authorised magnesium claims exist under Regulation (EU) No 432/2012, and each one carries conditions on the wording and the dose. The brand's reviewer applies the exact authorised text and checks that the product meets its conditions. In the US, a structure/function statement needs substantiation and the DSHEA disclaimer. Neither market allows a disease-related claim for the ingredient. This page makes no health claim. It describes the material, the analytical evidence and the framework; the claim sits with the brand and the destination market, not with this page. A claim revision does not reopen the specification, and a specification change does not approve a claim. ## Documents for the file - Batch COA with magnesium, loss on drying, glycine and the ratio, heavy metals and microbiology. - Specification and technical data sheet naming the hydrate grade, the magnesium range and the water range. - Safety data sheet with the standard 16 sections. - Allergen, GMO, origin and residual-solvent declarations. - Dietary-ingredient basis for the US, where that route is used. - Finished-product contaminant calculation and the label artwork. - Change-control record for the source, process, pack or grade. ## Checklist before the first order - Is the ingredient named as magnesium bisglycinate hydrate, with CAS 14783-68-7 and the specification version? - Does the destination file cover the permitted-list entry and the hydrate description? - Are the contaminant results converted to the finished dose, including the excipients? - Does the label declare elemental magnesium and name the hydrate as the source? - Is every claim authorised, or is it a substantiated structure/function statement with the required disclaimer? - Are the specification, the certificate and the quotation on the same revision? The catalog specification is on the hydrate product page; the other grade is on the anhydrous page; the release tests are on the COA page; analytical methods are in the methods library; the lot file is described on the quality page. ### 06 How to prove a magnesium bisglycinate hydrate lot URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-bisglycinate-hydrate/identity/ Reviewed: 2026-11-20 A magnesium bisglycinate hydrate lot is the named material when four results agree: magnesium inside 11.0–12.5%, loss on drying inside 8.0–14.0%, a 1:2 magnesium–glycine ratio, and a solid-state check that the water is part of the hydrate rather than a wet powder. The magnesium figure alone cannot separate the hydrate from the anhydrous grade at 13.5–14.2% or from a blend. The water result is the second half of the identity, not an extra line on the certificate. In one lineA hydrate lot is identified by four agreeing figures: the 1:2 magnesium–glycine ratio, the magnesium result, the water result and a solid-state check that the water is part of the crystal. ## The four identity layers Each layer answers a different question, and each needs its own evidence. A certificate that gives only the magnesium result has answered the metal question and left the ligand, the water and the solid form open. Identity layers · magnesium bisglycinate hydrate | Layer | Question | Test | What it proves | Document | Is the hydrate named, with the CAS number? | Certificate and specification | Paperwork only | Metal | Is the magnesium inside 11.0–12.5%? | Complexometric titration | The elemental content of the sample | Ligand | Is the ratio 1:2? | Glycine by HPLC; ratio calculated | That the glycine is consistent with the chelate | Water | Is the water inside 8.0–14.0%? | Loss on drying or Karl Fischer | The hydrate grade, not the anhydrous grade | Solid state | Is the water in the crystal? | X-ray diffraction, TGA or FTIR | Hydrate form rather than surface moisture The layers have to agree. A magnesium result inside the range with water at 3% is not the hydrate grade, however the certificate is titled. A water result inside the range with a magnesium figure near 14% is not the hydrate either; the two numbers describe different powders. ## The 1:2 ratio across the hydrates The chelate has one magnesium ion and two glycine ligands, so the molar ratio is 1:2 whether the powder is anhydrous or hydrated. The mass fractions move with the water: the anhydrous chelate is about 14.1% magnesium and 85.9% bound glycine; a monohydrate is about 12.8% magnesium and 77.8% glycine; a dihydrate is about 11.7% magnesium and 71.1% glycine. The ratio stays fixed while the percentages fall, which is why the ratio is a better identity check than either percentage alone. The ratio is calculated from the magnesium and glycine assays, so its uncertainty is the sum of both methods. The specification should give a tolerance around 1:2, not a single figure. A glycine result above the 1:2 expectation points to added glycine or a low-magnesium carrier; a glycine result below it points to a second magnesium source or a partly different reaction product. Free glycine is not in this catalog specification; if the buyer needs it, it can be added as a separate line, and it is the measurement that separates bound ligand from added ligand. ## Water in the crystal: LOD, TGA and XRD Loss on drying measures the water that leaves the powder under the stated conditions. It does not, by itself, say whether that water was in the crystal or on the surface. Thermogravimetric analysis separates the mass losses as the sample is heated, and the shape of the curve can show a hydrate step rather than a smooth surface-moisture loss. X-ray diffraction compares the solid's pattern with a reference and can show a crystalline hydrate phase; Fourier-transform infrared spectroscopy adds the metal–ligand bands that a physical blend does not reproduce. None of these methods is a routine release test for this grade, and each has a limit. A partly amorphous or mixed hydrate may not give a clean diffraction pattern, and a “not detected” statement is only meaningful with the detection limit attached. Ask for the raw curve or pattern, not only the word “conforms”, when the hydrate state is the question. A combination of loss on drying, magnesium and a solid-state check is stronger than any one of them. ## What substitution looks like Substitutions and the signals on a hydrate lot | Substitution | What moves | Test | Anhydrous grade sold as hydrate | Magnesium high; water low | Magnesium plus loss on drying | Hydrate sold as anhydrous | Magnesium low; water high | Magnesium plus loss on drying | Added glycine | Glycine high; above the 1:2 expectation | Glycine by HPLC; free glycine | Magnesium oxide blend | Magnesium above 12.5%; ratio low | XRD oxide screen; titration | Carbonate or hydroxide source | Magnesium high; pH and solubility shift | XRD, FTIR, pH of a stated suspension A common substitution is not a foreign substance; it is the other grade of the same chelate. The anhydrous powder is the same molecule with less water, so a certificate that names “magnesium bisglycinate” without the hydrate and reports 14% magnesium is not proving a hydrate. The water result and the product name are the two lines that catch it. ## Specification clauses for the hydrate grade - “Magnesium bisglycinate hydrate, 1:2 chelate, CAS 14783-68-7.” - “Magnesium 11.0–12.5% by complexometric titration, as-is.” - “Loss on drying 8.0–14.0%; the hydrate state stated on the COA and the TDS.” - “Glycine by HPLC; Mg : glycine ratio 1 : 2 molar.” - “Particle size ≥95% through 80 mesh; appearance white to off-white.” - “No undeclared magnesium source; an oxide screen on request, with its detection limit.” - “A solid-state check reported when the hydrate state is disputed.” ## Five questions for the supplier - Is the product named magnesium bisglycinate hydrate on the certificate, and what are the magnesium and water results for this lot? - What is the glycine result and the calculated Mg : glycine ratio? - Is the 11.0–12.5% magnesium figure reported as-is or on a dried basis? - Can you provide a loss-on-drying curve or a TGA/XRD report if the hydrate state is questioned? - Is any magnesium source other than the chelate present, and is an oxide screen available? Five direct answers amount to an identity file; a single magnesium percentage does not. The hydrate product page carries the catalog specification; the anhydrous grade is the nearest substitution risk; the COA page shows where each result sits; the methods library describes the assays; the quality page covers the release file. ### 01 What the COA for magnesium citrate nonahydrate contains URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-citrate-nonahydrate/coa/ Reviewed: 2026-11-20 A magnesium citrate nonahydrate certificate has to be read as a pair of numbers: the magnesium titration and the Karl Fischer water. The catalog puts magnesium at 11.0–12.5% and water at 24.0–28.0%, with citrate identity, contaminants, microbiology and an 80 mesh sieve line around them. The specification is the catalogue target; the lot certificate is the evidence for one pack. In one lineOn a nonahydrate certificate the magnesium assay and the Karl Fischer water are two halves of one composition check, and neither line identifies the hydrate on its own. ## What the sheet has to show Three facts decide whether the powder is the named grade: the magnesium figure, the water figure and the presence of citrate. Everything else on the sheet describes purity or handling. A certificate that gives a magnesium percentage but leaves water to a footnote has skipped the line that separates this hydrate from the anhydrous salt. Catalogue limits for magnesium citrate nonahydrate | Test | Procedure | Limit | Colour and form | Visual | White to off-white powder | Magnesium | EDTA titration | 11.0–12.5% | Water | Karl Fischer | 24.0–28.0% | Identity | Citrate reaction; magnesium titration | Matches reference | Metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Micro | Plate count; absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Mesh | Sieve | ≥95% through 80 mesh No pH or bulk density is fixed for this grade in the catalogue. If either matters to the matrix or the capsule line, put it in the purchase specification; it will not appear on a standard certificate unless it was asked for. ## The magnesium is reported as received An assay run on a dried sample answers a different question. Drying drives off the crystal water, the sample mass falls, and the magnesium percentage rises toward the anhydrous figure of about 16.2%. The result may be analytically correct and still be the wrong material for this specification. The certificate should say that the assay is on the powder as received, with the water result next to it. The formula gives the anchor. Mg3(C6H5O7)2·9H2O has a molar mass near 613.2 g/mol; magnesium accounts for 72.9 g/mol (11.9%) and the nine waters for 162.1 g/mol (26.4%). The catalogue windows sit around those values rather than on them, so a commercial lot has room for purity and handling differences. Two lots at opposite corners of the two windows are not the same powder. Karl Fischer is specific to water. Loss on drying sees whatever evaporates under the oven programme, and on a nonahydrate that is largely the water of crystallisation. A supplier who offers a loss-on-drying result of ≤2.0% against this grade has sent the anhydrous limit, not a better batch. ## The gate and the measurement A limit tells the reader what the lot had to meet; a result tells the reader what it measured. The certificate needs both, and the method has to sit in the same row. Repeating the specification range in the result column is not a batch result. How the result column should read | Test | Limit | Result entry | Magnesium | 11.0–12.5% as received | Measured percentage; state the titration | Water | 24.0–28.0% | Measured percentage by Karl Fischer | Identity | Matches reference | Method, reference and comparison date | Metals | Each element | mg/kg for every element | Micro | Counts and absence | Count plus absence statement | Mesh | ≥95% through 80 mesh | Measured pass percentage For identity, “matches reference” is enough only when the method and the reference are named. For magnesium and water, the reader needs a figure. For metals, a single total hides which element drove it. ## Why two lots differ Water and magnesium are linked through the mass balance. A lot that retains more water shows a lower magnesium percentage; a lot that has lost water shows a higher one. That is why the two lines should be read together and why a drift in either is a reason to open the drying record. The crystal form is the other variable, and diffraction is the test that sees it. Milling and sieving move the 80 mesh result without touching the chemistry, so a mesh change is a process event, not a purity event. Colour is a weak signal: a grey cast can come from metal contact, a hot dryer or a different magnesium source while the assay and water remain inside the limits. Bulk density is absent from the catalogue but decides capsule fill; request it when the fill weight is tight. Finally, check the identifier. The lot code on the sheet, the pouch, the drum and the retain should be one code. A correct certificate for a different lot does not release the pack in front of you. ## When an outside laboratory helps Four situations justify the cost: an unknown supplier, a first entry into a regulated market, a label that claims the nonahydrate, or a disagreement over water or magnesium. The panel should close the gaps in the supplier's sheet rather than repeat it: EDTA magnesium, Karl Fischer water, citrate identity by reaction or infrared, ICP-MS metals and a micro count. Add diffraction if the hydrate itself is disputed. It can tell a crystalline nonahydrate from an anhydrous or partly dried phase, and it can find crystalline magnesium oxide that a magnesium assay cannot distinguish. Request the reference pattern and the detection limit; without them “XRD conforms” is an opinion. Send the retain, the supplier's certificate and your specification as one package. A referee needs the method and the limit as much as the sample, and a joint test on the retain is more useful than a second certificate from another drum. ## A supplier comparison that works Compare seven entries, not one: hydrate name and CAS; magnesium result and basis; Karl Fischer water and method; citrate identity method and reference; mesh and bulk density; contaminant and micro panel; pack size and lot code. A quote that omits the hydrate has not described a grade, and two sheets that agree on magnesium but differ on water describe different solids. The catalogue line is on the nonahydrate hub. The grade page explains the hydrate trade-off, the identity page lists the tests that separate the two solids, the EDTA method note covers the magnesium assay, and the quality page shows how the release file is assembled. ### 02 Nonahydrate or anhydrous: choosing a magnesium citrate grade URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-citrate-nonahydrate/grades/ Reviewed: 2026-11-20 Magnesium citrate nonahydrate is the nine-water form of the salt: Mg3(C6H5O7)2·9H2O, CAS 153531-96-5, with 11.0–12.5% magnesium and 24.0–28.0% water in the catalogue. The anhydrous grade carries the same anion without the crystal water, at 14.5–16.4% magnesium and a loss on drying of ≤2.0%. A label dose therefore needs about a third more nonahydrate powder, and the dosage form and fill weight decide which grade fits. In one lineThe nonahydrate is a grade, not a synonym for magnesium citrate: nine water molecules set the magnesium figure, the fill weight and the name on the specification. ## Water is part of the formula Crystal water occupies defined sites in the lattice. It is not a surface film that can be dried away without changing the solid, and it is the reason the two grades have different molar masses and different magnesium per kilogram. The nonahydrate is about 613 g/mol; the anhydrous salt is about 451 g/mol. “Magnesium citrate” on a purchase order names a family. The nonahydrate has its own CAS number and its own release windows, and all of them should be written on the order, the data sheet and the certificate. The formula predicts 11.9% magnesium and 26.4% water; the catalogue windows are wider because real lots carry purity and handling variation. ## The two catalogue grades Catalogue comparison of the two grades | Item | Anhydrous | Nonahydrate | Formula | Mg3(C6H5O7)2 | Mg3(C6H5O7)2·9H2O | CAS number | 3344-18-1 | 153531-96-5 | Molar mass | About 451 g/mol | About 613 g/mol | Magnesium | 14.5–16.4% | 11.0–12.5% | Water | Loss on drying ≤2.0% | Karl Fischer 24.0–28.0% | Identity | Citrate reaction and infrared spectrum | Citrate reaction and magnesium titration | Mesh | ≥95% through 40 mesh | ≥95% through 80 mesh | Common formats | Capsules, tablets, high-dose powders | Sticks, drink mixes, capsules The mesh and identity methods are catalogue choices, not laws. A nonahydrate can be milled coarser or granulated, and citrate identity can use reaction, infrared or both. Ask for the lot's mesh and method. The magnesium windows do not meet. A certificate at 13% fits neither grade; establish whether it is a blend, a partly dried hydrate or another salt. ## Powder behaviour The catalogue powder passes 80 mesh (180 µm). That is finer than the anhydrous 40 mesh grade, which helps dispersion in a stick or drink and creates more dust and slower capsule filling. Bulk density is not fixed in the catalogue; ask for the lot value when the capsule volume or hopper flow is critical. The salt is hygroscopic. Because the nonahydrate already carries its lattice water, the main risk is surface moisture and caking rather than further hydration, but an open liner in a damp room still changes the powder. Keep it sealed, keep it dry, and let a cold pack warm to room temperature before opening so condensation does not form. Colour is white to off-white. A grey or dull cast can come from metal contact or overheating while the assay and water still pass, so it is a reason to review the batch record, not an identity test. ## Fill weight and label The powder mass for a label dose is the elemental magnesium divided by the magnesium fraction. The table uses the catalogue edges and the midpoint for planning; the lot certificate replaces the midpoint at release. Powder needed for a magnesium label | Label Mg | Nonahydrate 11.0% | Nonahydrate 12.5% | Anhydrous 15.45% | 50 mg | 455 mg | 400 mg | 324 mg | 100 mg | 909 mg | 800 mg | 647 mg | 200 mg | 1,818 mg | 1,600 mg | 1,295 mg At a fixed 500 mg fill, the nonahydrate at 11.75% gives about 59 mg magnesium and the anhydrous grade at 15.45% gives about 77 mg. A 100 mg claim may fit one capsule on the anhydrous grade and need a larger capsule or two on the nonahydrate. Sticks and sachets have more room, which is why the hydrate appears there. The label follows the powder. The EU declares magnesium in mg and as a share of 375 mg; the US uses the 420 mg Daily Value. A grade change at a fixed powder weight moves the declared magnesium by about a third, so it needs a new label. The fill-weight page shows the arithmetic. ## Specification language - “Magnesium citrate nonahydrate, CAS 153531-96-5, Mg3(C6H5O7)2·9H2O.” - “Magnesium 11.0–12.5% as received by EDTA titration.” - “Water 24.0–28.0% by Karl Fischer.” - “Citrate identity by reaction and magnesium titration, reference named.” - “80 mesh: ≥95% through 180 µm; pH and bulk density on request.” - “Metals and micro as listed; no added magnesium oxide, carbonate or citric acid.” - “Pack, storage and retest period on the technical data sheet.” A specification copied from the anhydrous grade will reject every nonahydrate lot. The magnesium range and the drying limit describe a different solid, so start from the hydrate name. ## When the other grade is the fit Anhydrous suits a fixed capsule size, a high dose, or a freight-sensitive project. Nonahydrate suits a stick, drink or gummy where mass is available and the finer powder disperses. Neither is purer; the difference is concentration and crystal form. Changing grade is a change control: new specification, new water result, new stability work and new label arithmetic. The stability page covers water and pack; the COA page shows the water line. The nonahydrate hub holds the catalogue line; the compliance page covers the label route; the methods index explains the assays; the quality page covers release. ### 02.1 Anhydrous vs nonahydrate magnesium citrate: the water and the fill URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-citrate-nonahydrate/grades/anhydrous-vs-nonahydrate-magnesium-citrate/ Reviewed: 2026-11-20 Strip the water from magnesium citrate nonahydrate and the same lattice becomes the anhydrous grade. The dry salt has a molar mass near 451 g/mol and carries 16.2% magnesium; the nonahydrate is close to 613 g/mol and carries 11.9%. The catalogue reflects that gap with 14.5–16.4% magnesium and loss on drying ≤2.0% on one side, and 11.0–12.5% magnesium with 24.0–28.0% Karl Fischer water on the other. A fixed label dose therefore needs about a third more powder on the hydrate, and the capsule, tablet or stick has to be sized for it. In one lineThe water line and the magnesium line move together, so fill weight has to be calculated from the pair of limits rather than from a single magnesium figure. ## Three numbers, one fill weight The label dose is elemental magnesium. The powder mass is that dose divided by the magnesium fraction of the grade, and the water content sets the fraction. For planning, use the catalog window; for release, use the result for the lot in hand. Powder mass for a 100 mg magnesium label, by grade and assay | Grade and assay | Magnesium used | Powder for 100 mg | Nonahydrate, low end | 11.0% | 909 mg | Nonahydrate, midpoint | 11.75% | 851 mg | Nonahydrate, high end | 12.5% | 800 mg | Anhydrous, low end | 14.5% | 690 mg | Anhydrous, high end | 16.4% | 610 mg The 109 mg spread between the two nonahydrate edges is a capsule size or a stick fill. A lot at 11.2% needs more powder than one at 12.2%, so the fill setting follows the certificate rather than the catalogue midpoint. ## The water is composition, not contamination The nine waters account for roughly 162 g of the 613 g molar mass, or 26.4%. Karl Fischer is the method because it measures water specifically. Loss on drying measures whatever leaves under the oven conditions, and on this grade that is mostly crystal water; a loss-on-drying limit of ≤2.0% is the anhydrous specification, not a tighter version of the nonahydrate's 24.0–28.0% water. A nonahydrate certificate showing ≤2.0% loss on drying is the anhydrous grade. The water window is wide. Twenty-four percent and 28% are not the same powder, and the midpoint is only a planning figure. Ask for the lot's Karl Fischer result and use it. The two windows are not independent: removing water raises the magnesium on a mass basis, and adding water lowers it. Read the pair as one composition, not as two unrelated passes. ## The fill weight in the dosage form A capsule has a fixed volume. A 500 mg fill delivers about 59 mg of magnesium at 11.75% and about 77 mg at 15.45%, so a 100 mg claim needs 851 mg of the nonahydrate or 647 mg of the anhydrous salt. On the nonahydrate that may mean a larger capsule, a denser fill or two capsules; on the anhydrous grade one capsule is realistic. A tablet has the same constraint in a different shape: 851 mg of active powder plus excipients can push the tablet weight past what most consumers will swallow, while 647 mg leaves more room. Sticks and sachets are more forgiving of mass, and the nonahydrate's 80 mesh powder disperses readily, which is why the hydrate is common in those formats. A gummy has room for mass too, but its water activity and taste decide more than the grade does. Bulk density is not in the catalog for this grade, yet the fill volume depends on it; ask for the lot figure. Granulation changes flow and density, not the magnesium fraction. Overage cannot rescue a fill weight that does not fit; it is a label and stability choice, and the capsule volume remains the first constraint. ## Which format fits which grade Format fit by grade | Format | Which grade fits | What to check | Capsule | Anhydrous for a high dose in one capsule; nonahydrate needs volume | Fill weight, bulk density and capsule size | Tablet | Anhydrous for a 100 mg claim; nonahydrate at a lower dose | Tablet weight, hardness and excipients | Stick or sachet | Nonahydrate; mass is available and the powder disperses | Seal integrity and moisture barrier | Beverage | Nonahydrate; it dissolves and the citrate taste is manageable | pH, mineral load and hold time | Gummy | Nonahydrate; mass is available | Water activity, taste and process heat The table is a starting point, not a rule. The fill trial and the label decide. The anhydrous grade is more concentrated, not more active, and the nonahydrate is heavier, not weaker. ## What the label and the specification must say The label declares elemental magnesium: the EU uses mg plus a percentage of 375 mg, the US a percentage of the 420 mg Daily Value. If the label also declares the salt weight, the hydrate has to be named and the magnesium figure recalculated. A grade switch is a new label, a new specification and new stability data, not a purchasing substitution. The purchase order should name the hydrate, the CAS number, the magnesium range, the water range and the mesh. “Magnesium citrate” without the hydrate is a family name, and a certificate that reports 11.9% magnesium against a 14.5–16.4% line is a different product, not a short delivery. The water line on the certificate is the proof that the grade ordered is the grade packed. ## Choosing between the two grades - Choose the anhydrous grade when the fill volume is fixed, the dose is high, or freight and storage volume matter. - Choose the nonahydrate when mass is available, as in a stick, a beverage or a gummy, and when the finer 80 mesh dispersion is wanted. - Compare the mass needed per dose, not the drum weight or the magnesium percentage on its own. - Handle a grade change as a project: fresh specification, fresh water result, fresh stability work and fresh label sums. The product hub carries the nonahydrate catalog line; the anhydrous product page carries the comparator; the grade comparison places both among the process variants; the COA page shows where the water is reported; the compliance page covers the label route; the quality page covers release. ### 03 Magnesium citrate nonahydrate: the water line is the stability line URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-citrate-nonahydrate/stability/ Reviewed: 2026-11-20 Magnesium citrate nonahydrate is a stable solid when the pack stays sealed and dry. The variable that matters is water: the crystal holds nine molecules, the catalogue sets 24.0–28.0% by Karl Fischer, and a move outside that window changes the powder even if the magnesium assay still passes. The matrix adds its own risks once the powder is dissolved or blended. In one lineThe nine waters are part of the crystal; the pack has to keep the powder at its specified water, because drying and moisture pickup both change the material in the drum. ## The sealed pack An unopened foil pouch or a lined fiber drum protects the salt at normal warehouse temperature. The magnesium figure has little room to move; the water figure does. An open liner in humid air collects surface moisture, and a hot, dry environment can take water from the surface. Karl Fischer is the measurement to trend because it reports the water that belongs to the grade. Caking, bridging in a hopper and a shift in bulk density are the visible consequences. Keep the liner closed, put the drum on a pallet rather than a concrete floor, and use a desiccant only where the climate calls for one. A result of 26% water is normal for this hydrate; a result below 24% or above 28% is the exception to investigate. Loss on drying is not a substitute. On a hydrate it reports a large loss that is mostly crystal water, so a 2.0% loss-on-drying limit belongs to the anhydrous grade. If a supplier sends that figure for a nonahydrate, ask which solid was tested. ## After dissolution The salt dissolves in water and gives a clear to slightly opalescent liquid. The hydrate identity ends at dissolution; what remains is a citrate solution with magnesium ions, and its behaviour depends on pH, other minerals, heat and time. Citrate binds calcium, iron and zinc, so a multi-mineral drink can throw haze or shift colour. The citrate taste is salty-sour and becomes more noticeable as the dose rises. A beverage trial should use the final pH, the final mineral load and the real process temperature. A stick pack is different: the consumer adds water at use, so the powder's water is a storage question and the solution is a use question. Data from the drum does not describe a liquid. ## What changes the powder Risk factors for the nonahydrate | Factor | What it changes | Control | Humidity | Surface water, caking, a rising Karl Fischer result | Sealed liner; dry room; desiccant if needed | Heat | Water migration; surface drying | Cool store; short heat exposure | Pack integrity | Vapour through a fold, seam or pinhole | Foil laminate; intact liner; reseal | Excipients | Water donation or pH movement in the blend | Test the blend, not just the powder | Calcium, iron, zinc | Citrate exchange; haze or colour | Check the mineral load | pH | Protonation at low pH; haze at high pH | Buffer and validate | Storage time | Slow drift in water, flow and appearance | Retest period from the pack study The factors compound. A humid room plus an open liner is worse than either alone, and a warm solution adds heat to the pH effect. The question is always which pack, which condition and which duration. ## Designing the study Put the commercial pack into 25 °C/60% RH and 30 °C/65% RH, with an accelerated arm at 40 °C/75% RH. Test at 0, 3, 6, 12 and 24 months for EDTA magnesium, Karl Fischer water, appearance, mesh and micro. Add XRD at the start and the end if the phase is part of the question. The warm arm may move water either way. Falling water with rising magnesium suggests drying; rising water with caking suggests moisture uptake. Read the water result next to the chamber condition, and use diffraction when the phase is unclear. Run the finished dosage form separately. A capsule, tablet, stick or gummy has its own water activity, excipients and process heat. Test magnesium, water, appearance and disintegration or dissolution after storage; the drum can pass while the product fails. ## The matrix decides the rest A capsule or tablet has low water activity, but the shell and excipients can still pass moisture into the fill. A sealed blister or a tight HDPE bottle with a desiccant is the safer pack for a hygroscopic fill; hardness and disintegration are checked after storage. A stick fails at the seam first, so the foil and the seal are inspected as well as the powder. A drink or a gummy brings pH, water activity, minerals and taste together. The nonahydrate dissolves, but clarity and flavour belong to the matrix. An overage does not fix a leaky pack; it is a label and stability choice, and the pack and matrix still need their own data. ## Assigning a retest period No single shelf life belongs to the molecule. The retest period is set for a pack, a storage condition and a test panel, and it belongs on the technical data sheet. A 1 kg pouch and a 25 kg drum differ in headspace, opening history and surface-to-volume ratio, so one pack's data does not automatically cover the other. At the end of the period, re-test the retain before extending use. Do not extend by assumption and do not move a bulk figure to a repacked container. The hub lists the packs; the COA page lists the release tests; the MOQ page covers pack and lead time; the loss-on-drying entry explains the method that is not used here; the quality page covers the release file. ### 04 Magnesium citrate nonahydrate: MOQ, packs and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-citrate-nonahydrate/moq/ Reviewed: 2026-11-20 Magnesium citrate nonahydrate ships from a 1 kg minimum: one foil pouch, one lot code and enough powder for a bench trial plus a retain. Production usually moves to the 25 kg fiber drum, and the standard dispatch window is 1–7 days from confirmation. A usable quotation has to name the hydrate, the magnesium and water windows, the pack and the destination, because “magnesium citrate” alone can mean either grade. In one lineA kilogram is the unit that carries a lot code, a retain and enough powder to qualify the hydrate before a production order. ## Why the floor is a kilogram A 1 kg pouch is a commercial unit, not a scoop from a drum. It is large enough for a formulation trial, a retained sample and an independent check of magnesium, water, citrate and mesh, and small enough to move as a parcel. Below that weight the material is normally split from a larger lot, which adds handling and weakens the link between the powder and its original pack record. The 25 kg drum lowers the handling per kilogram, but it also locks up stock and storage time; the minimum is about the pack, not about pressure to buy volume. For this hydrate the sample has to be tested for water as well as magnesium. A kilogram gives the laboratory room to run Karl Fischer, citrate identity, mesh and microbiology and still leave a retain; a 100 g split may not. ## Packs on the offer Pack options for magnesium citrate nonahydrate | Pack | Size | Usual purpose | Handling | Foil pouch | 1 kg | Trial, sample, small batch | Heat-sealed; fold and clip after opening | Fiber drum | 25 kg | Production | Liner tied; code on drum and liner | 80 mesh powder | Bulk | Capsules, sticks, drink mixes | Standard sieve profile | Granulated powder | Bulk, on request | Better flow, less dust | New particle specification A different mesh or a granulated grade is a new specification. Raise it before the quotation, because the sieve line, the density and the dispatch estimate can all change. ## From confirmation to dispatch Standard material is quoted at 1–7 days after the order is confirmed. The clock covers picking, the document set and handover to the carrier; it stops before transit, customs and the customer's own release. A granulated or non-standard mesh adds a production step, and the quotation should show that separately. Ask for a dispatch date rather than a range. A pouch travels as a parcel and a drum as a pallet, and the Incoterm decides who books the movement and who clears it. The COA and data sheets should be in the same shipment as the powder. ## Six details that make a quote usable - Hydrate and CAS. Magnesium citrate nonahydrate, CAS 153531-96-5, written out. - Release windows. Magnesium 11.0–12.5%, water 24.0–28.0% by Karl Fischer, mesh and the contaminant panel. - Pack. 1 kg pouch, 25 kg drum, or the granulated variant. - Delivery. Country, address or port, and Incoterm. - Paperwork. COA, TDS, SDS and any destination statement the importer needs. - Use and market. Supplement, food or another use, and where it will be sold. Without the hydrate and the market, the quote cannot be checked against the destination file. The commercial figures sit on the quotation; this page does not carry them. ## A sample with a lot code The 1 kg pouch is the qualification unit. Run magnesium, Karl Fischer water, citrate identity, mesh and microbiology, then keep part of the same pack as the retain. The lot code must connect the sample, the certificate and the quotation. A bench trial below 1 kg is a repack from a bulk lot: it has its own handling record and cannot be passed off as the catalogue pouch. Put the split in writing and keep its code with the trial. The trial powder and the production powder can come from different lots even when both meet the same specification. The certificate is issued per lot, so the lot that was qualified is the lot to repeat. ## What to agree before the first production order The quality agreement should sit on the same page as the commercial terms: Incoterm, pack, dispatch window, specification revision, certificate per lot, retain, retest period, and the change route for hydrate, source, mesh and pack. Agree the referee laboratory and who pays for it while the relationship is calm. If a lot misses the agreed limits, the evidence is the retain and a joint test against the named method. A photograph of an open drum is not a result. An appearance-based return is difficult to defend from either side. The nonahydrate hub holds the catalogue line; the grade page explains the hydrate choice; the compliance page covers destination files; the MOQ glossary entry defines the term; the logistics page covers movement; the quality page covers release. ### 05 The regulatory file for magnesium citrate nonahydrate URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-citrate-nonahydrate/compliance/ Reviewed: 2026-11-20 A magnesium citrate nonahydrate file has four working parts: the specification, the lot certificate, the destination route and the change record. The route is not settled by the certificate. The buyer's regulatory team confirms the permitted-source entry, the use level and the label for the destination, while the supplier keeps the specification and the lot evidence current. This page lists the frameworks and documents; it is not legal advice and makes no health claim. In one lineA magnesium citrate file is built from the permitted-source entry, the lot certificate and the label, and the hydrate form has to be consistent across all three. ## The file and its thread The specification names the hydrate, the CAS number and the two release windows. The certificate releases a lot against it. The destination route adds the permitted-source decision, contaminant limits, labelling and claims. The change record covers source, process, mesh and pack. Data sheets and safety sheets support the file but do not replace any part of it. The hydrate name must survive every page. If the specification says nonahydrate, the water result, the data sheet and the label discussion should describe the same solid. A file that switches to the anhydrous name halfway through has a gap before any reviewer reaches it. Great Britain's retained list and Northern Ireland's EU route are checked as separate destinations. ## European Union For a food supplement, the permitted-source list to check is Annex II of Directive 2002/46/EC; the buyer's team confirms the entry, its wording and the use level. Regulation (EC) No 178/2002 (general food law), Regulation (EU) No 1169/2011 (labelling) and Commission Regulation (EU) 2023/915 (contaminants) apply alongside it. An additive use would move the file to Regulation (EC) No 1333/2008 and its purity criteria. Member State notification is a separate step. These references are current as of this review; confirm the consolidated text. The nutrition declaration states magnesium in mg and as a percentage of the 375 mg reference intake. The grade changes the magnesium per gram: 1,000 mg of nonahydrate at 11.75% gives about 117.5 mg, while 1,000 mg of anhydrous at 15.45% gives about 154.5 mg. A label that keeps the same claim after an unannounced grade change is wrong even when the certificate is valid. The EU notes gather the references. ## United States A dietary supplement containing magnesium citrate sits under DSHEA, with cGMP in 21 CFR 111 and the Supplement Facts format in 21 CFR 101.36. The ingredient list names the salt and the panel states elemental magnesium against the 420 mg Daily Value. The supplier supplies the specification and certificate; the buyer's team confirms the dietary-ingredient basis and the label. The certificate alone does not establish that basis. Structure/function wording belongs to the brand: it must be truthful, substantiated and followed by the DSHEA disclaimer, and it is reviewed apart from identity. California Proposition 65 can also apply at a high daily dose. The US notes list the instruments. ## Contaminants at the real dose The catalogue panel is Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg. Those figures apply to the powder. A capsule where the salt is one of several ingredients can tolerate a higher raw-material result than a stick that is mostly magnesium citrate, because the rest of the serving dilutes it. Multiply the raw result by the salt's share of the serving and compare that with the finished-product limit. Finished-product limits to confirm | Element | EU supplement limit | Evidence to keep | Lead (Pb) | 3.0 mg/kg of the product as sold | Lot result, method and dilution sum | Cadmium (Cd) | 1.0 mg/kg | Lot result and any exception that applies | Mercury (Hg) | 0.10 mg/kg | Lot result and method | Arsenic (As) | No EU-wide figure; market or customer limit | Agreed limit, method and finished-product figure Put the calculated ceiling into the purchase specification and confirm the current text for the destination. The table is a starting point, not the regulation. ## Naming the material The EU ingredient list uses the source name the law provides, and the nutrition declaration carries the magnesium figure. The hydrate may not be visible on the front of the pack, so the specification and certificate are where the grade is recorded. In the US, the Supplement Facts panel names the salt; “magnesium citrate” without the hydrate is ambiguous, and a quantitative ingredient declaration must match the drum. Allergen, GMO and origin statements come from the source. A statement copied from another product is not evidence for this lot. Claims belong to the brand that prints them; this site publishes specifications, not health claims. ## Claims EU magnesium claims are authorised by Regulation (EU) No 432/2012, and each carries conditions, including that the food be a significant source. US structure/function statements need substantiation and the DSHEA disclaimer. Neither market permits a disease-related claim, and mechanism language is not an authorisation. The certificate supports the material, not the wording. The grade does not create a claim category, but it changes the quantity behind the claim. A magnesium figure on the label has to match the grade on the certificate, and a claim revision does not reopen the specification. The COA page shows where the magnesium and water sit. ## The document pack - Lot certificate: EDTA magnesium as received, Karl Fischer water, citrate identity, metals, micro and mesh. - Specification and data sheet with the hydrate, CAS and both windows. - Safety data sheet, 16 sections. - Allergen, GMO, origin and residual-solvent statements. - Destination permitted-source memo. - Change-control record for source, hydrate, mesh and pack. Each certificate should name its methods. A sheet with numbers but no methods cannot be reproduced; a specification without the hydrate cannot be matched to the drum. ## Before the order - Hydrate, CAS and specification revision on the purchase order. - Permitted-source route confirmed for the destination and use. - Contaminants converted to the finished dose. - Label magnesium matches the hydrate. - Claims reviewed, with the disclaimer where needed. - Documents and change control complete. The nonahydrate hub holds the catalogue specification; the identity page covers the analytical evidence; the methods index explains the assays; the quality page covers the release file; the EU notes provide the framework references. ### 06 How we prove a magnesium citrate lot is the nonahydrate URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-citrate-nonahydrate/identity/ Reviewed: 2026-11-20 A nonahydrate claim is supported by three agreeing results: citrate identity for the anion, an EDTA magnesium figure inside 11.0–12.5%, and a Karl Fischer water figure inside 24.0–28.0%. The water result is what separates this grade from the anhydrous salt; the magnesium result on its own cannot. The lot code should tie the certificate, the specification and the retain together. In one lineFor a hydrate, identity is a composition check: the citrate proves the anion, the magnesium proves the metal, and the water proves which hydrate was packed. ## Four checks, one material A certificate can carry the right name and still not prove the powder. The checks below ask separate questions, and each needs its own evidence. Checks used to identify the nonahydrate | Check | What it answers | Method | Evidence | Paperwork | Is the hydrate named? | Name, CAS, formula | A claim, not a measurement | Anion | Is citrate present? | Citrate reaction; infrared | The organic acid | Metal | How much magnesium? | EDTA titration | The quantity | Water | Which hydrate? | Karl Fischer | The crystal water | Phase | Is it crystalline? | XRD on request | The solid form The paperwork check is the label on the bottle; the other four are measurements. Anion plus metal plus water is the minimum set for a hydrate. Diffraction is the tie-breaker when the first three do not agree. ## The formula as a cross-check Three magnesium ions balance two citrate ions, so the anhydrous formula is Mg3(C6H5O7)2. Adding nine waters gives a molar mass near 613.2 g/mol, against about 451 g/mol for the dry salt. On the nonahydrate the theoretical split is roughly 11.9% magnesium, 61.7% citrate and 26.4% water, and those three figures account for the whole formula. The number 8.41 (613.2 ÷ 72.9) turns a magnesium result into a nonahydrate equivalent. Read it as a mass-balance check, not a purity limit. A lot at 11.9% magnesium and 26.4% water matches the formula; a lot at the edge of both catalogue windows is still within the specification but is a different solid, and the pair belongs in the identity record. Citrate is qualitative in the catalogue, so a quantitative citrate result is an extra check. A mismatch points to the next test. High magnesium with low water suggests a partly dehydrated or anhydrous fraction; low magnesium with high water suggests surface moisture or a diluent. Neither direction proves the cause, but both tell the laboratory what to run next. The hydrate entry explains the general arithmetic. ## Diffraction and the crystal X-ray diffraction sees crystalline phases. It can tell the nonahydrate from an anhydrous or partly dried phase, and it can detect crystalline magnesium oxide that the EDTA titration cannot distinguish. It does not measure purity or the counter-ion. Ask for the reference pattern and the detection limit before accepting a match. Use diffraction when the water and magnesium results disagree, when a new source is being qualified, or when the label names the nonahydrate and the sheet is silent on phase. A report that says “XRD conforms” but attaches no pattern or reference has added little. Infrared is the bond-level partner: it shows citrate and water bands but not the lattice. The XRD note and the FTIR note describe both techniques. ## Routes and their fingerprints Substitution routes for a nonahydrate lot | Route | What shifts | Warning sign | Test | Anhydrous or partly dried citrate | Water low, magnesium high | The pair falls outside the hydrate window | Karl Fischer, EDTA, XRD | Magnesium oxide | Magnesium high, no citrate | Metal passes without the anion | Citrate reaction, XRD | Magnesium carbonate | Magnesium high, carbonate present | Acid test gives carbon dioxide | Acid test, XRD | Citric acid | Magnesium low, citrate high | Anion rises without the metal | Citrate assay, pH | Diluent | Magnesium low | Mass balance leaves a gap | EDTA, Karl Fischer, balance The most common failure is documentary: an anhydrous lot supplied against a nonahydrate line. The water result exposes it. Appearance is the least useful check, because white to off-white covers both grades and many blends. ## Writing the identity into the specification - “Magnesium citrate nonahydrate; CAS 153531-96-5; Mg3(C6H5O7)2·9H2O.” - “EDTA magnesium 11.0–12.5%, measured on the powder as received.” - “Karl Fischer water 24.0–28.0%.” - “Citrate identity by reaction and infrared, with the reference named.” - “XRD available on request; state the detection limit.” - “No added magnesium oxide, magnesium carbonate or citric acid.” - “Mesh, metals, micro and lot traceability as listed.” The prohibitions carry as much weight as the numbers. A specification that sets a magnesium range but never excludes an added mineral has left the door open. ## Five questions that build a file - Which hydrate is on the certificate, and which CAS number? - Was the magnesium measured as received, or after drying? - What is the Karl Fischer water result for this lot? - Which citrate method and reference were used? - If water and magnesium disagree, will you supply an XRD pattern or a joint test on the retain? Five clear answers are an identity file. A magnesium percentage alone is a number. The hub holds the catalogue line; the COA page shows where each result sits; the grade page compares the two solids; the EDTA note explains the titration; the quality page covers release. ### 01 What the COA for D-pantothenic acid reports URL: https://nutrition.rainwoodbio.com/products/vitamins/pantothenic-acid/coa/ Reviewed: 2026-11-20 A pantothenic acid certificate is a lot-specific test report. It should list appearance, HPLC and IR identification, HPLC assay, loss on drying, the pH of a 5% solution, the heavy-metal panel, microbiology and particle size, with the method and the release limit beside each result. The figures below are the catalog specification; the certificate is what confirms a particular pack. In one lineThe free acid is identified by HPLC and IR, and its acidic 5% solution separates it from the salt; the assay needs a stated moisture basis. ## Reading the certificate line by line A certificate is only as useful as its weakest line. For every parameter the reader should be able to see what was tested, how it was tested and the boundary the lot had to meet. A bare “conforms” gives a conclusion with no route to check it. The identity block leads, because a bad identity result cannot be offset by a high assay. On this product the pH row also carries information about form: an acidic solution is consistent with the free acid, while a pantothenate salt would sit nearer neutral. Release panel for D-pantothenic acid | Test | How it is run | Limit for release | Appearance | Visual inspection | White to off-white powder | Identity | HPLC retention plus IR spectrum | Matches the reference | Assay | HPLC; basis declared | 98.0–101.0% | Water | Gravimetric loss on drying | ≤5.0% | Acidity | Potentiometric pH, 5% solution | 2.5–3.5 | Metals | ICP-MS, individual elements | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Micro | Total plate count plus absence screen | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve test at 80 mesh | ≥95% passing ## Assay basis, water and pH The catalog gives 98.0–101.0% by HPLC, but it does not say whether that number is calculated on the powder as received or on the dried solids. The certificate must settle it. Take a lot at 99.0% on the dried basis with 3.0% loss on drying: the as-is figure is 96.0%, and a weigh-up built on 99.0% overstates the active mass by three points. pH is not a purity measure here; it is a quick form check. The free acid has a carboxyl group, so its 5% solution falls in the 2.5–3.5 window. Calcium or sodium pantothenate would not. A pH value is only comparable when the concentration and temperature accompany it. Pantothenic acid absorbs weakly in the ultraviolet, which is why the HPLC method needs a declared detection wavelength and a named standard. Retention time by itself is a single data point; the IR spectrum supplies the second. ## Limit, result and what counts as evidence Two different things belong in two different columns: the boundary the lot had to meet, and the value the laboratory actually obtained. Printing the specification range in the result column does not report a measurement. What a useful result column contains | Test | Acceptance boundary | Expected entry | Assay | 98.0–101.0% by HPLC | The measured percentage, with basis and wavelength | Water | ≤5.0% | The measured loss and the drying condition | Acidity | 2.5–3.5 at 5% | The measured pH and the concentration used | Metals | Separate limit per element | A figure in mg/kg for each element | Particle size | ≥95% through 80 mesh | The measured percentage passing A conclusion such as “meets specification” is only useful if the numbers that support it are visible. Micro results need counts and absence statements; metals need one figure per element, not a sum that hides which element is high. ## What changes from lot to lot Water content follows the dryer and the pack. Colour follows the drying history and, on a hygroscopic powder, the time it spent exposed before filling. The 80 mesh result follows the mill and the sieve, so a new mill can move that line while the chemistry is unchanged. Look at the direction of travel across lots rather than one number near a limit. Rising moisture, a drifting pH or a new shoulder in the chromatogram is a pattern worth asking about. The lot code on the paper should also appear on the pouch, the drum and the retained sample. ## Bringing in an outside laboratory An outside laboratory is worth using for a new source, a first import into a regulated market, a form the supplier's certificate does not establish, or a result in dispute. The panel should be chosen for the question, not copied from the certificate: HPLC with the wavelength stated, IR against a reference, loss on drying, pH, calcium and sodium by ICP-OES, the metal panel and micro. Where the D-enantiomer is contractual, add specific rotation; IR and an achiral HPLC method cannot tell D from L. Each screen should come with its detection limit, because “not detected” means little without knowing how low the method can see. ## A supplier comparison that works Six lines make a comparison: the form and CAS number; the assay and its basis; the HPLC wavelength and the IR match; moisture and pH; metals and micro; pack and lot code. If two offers agree on the percentage but not on the form or the basis, they are not the same material. The catalog values are on the pantothenic acid product page. The calcium salt is described on the vitamin B5 page; the identity page covers the form tests; the methods library holds the HPLC and FTIR notes; the quality page explains release. ### 02 Pantothenic acid grades: free acid powder, mesh and the calcium salt URL: https://nutrition.rainwoodbio.com/products/vitamins/pantothenic-acid/grades/ Reviewed: 2026-11-20 D-Pantothenic acid is supplied here as an 80 mesh powder, with granulation available on request. The grade choice is the form first — free acid, calcium salt, sodium salt, panthenol or pantethine — and the particle second. The table lists the materials a buyer may meet under the vitamin B5 name; only the free-acid rows are this product. In one lineThe grade is the form plus the particle: a free-acid powder, a granulated free acid and a calcium salt are three different specifications, not three pack sizes. ## Why one vitamin name covers several grades “Vitamin B5” is a label name, not a specification. The nutrient is pantothenic acid; the commercial materials are the free acid, its calcium salt, its sodium salt, panthenol and pantethine. Each has its own CAS number, assay basis and label name, so a purchase order that names only vitamin B5 has left the form open. The free acid also has two enantiomers. The catalog names D-pantothenic acid, and the D-form is the one used as the vitamin. That matters because the identity lines on this product are HPLC and IR, and neither separates D from L on its own; specific rotation is the check when the enantiomer is contractual. This range supplies the D-form of the free acid as a powder. The other materials in the table are listed so that a quotation can be read, not because they can be substituted without a new specification and, in most markets, a new label review. ## The grade families side by side Pantothenic acid forms and grades, and what changes | Grade | Form | Typical use | What changes | Free acid powder | White to off-white powder, ≥95% through 80 mesh | Capsules, tablets, dry blends | Baseline; acidic solution; hygroscopic | Free acid, granulated | Agglomerated powder, on request | High-speed tableting, stick packs | Flow, dust and bulk density; same assay, pH and drying limit | Free-acid premix | Free acid on a carrier, on request | Low-dose blends | Assay per gram, carrier and label; not the same specification | Calcium D-pantothenate | White powder, 40 mesh | Capsules, tablets, dry blends | Salt factor 0.920, calcium 8.0–8.6%, near-neutral pH | Sodium D-pantothenate | Sodium salt, powder | Where calcium is not wanted | Counter-ion, label and hygroscopicity | D-Panthenol | Liquid alcohol | Liquid formats | Not a powder; a different ingredient and label | Pantethine | Dimeric form | Specialty formats | Different CAS number and label The first two rows are this product. Every other row moves at least one line on the certificate, and most move the ingredient list as well. A granulated free acid still has to meet the same assay, pH and loss on drying; the granulation changes the physical behaviour, not the chemistry. ## Mesh, flow and the hygroscopic powder 80 mesh is a finishing specification: at least 95% of the powder passes an 80 mesh sieve, which is finer than the 40 mesh figure on the calcium salt. The number describes the coarse fraction, not the whole distribution. A powder that passes 80 mesh can still hold a large share of fines, and fines are what dust, stick to a capsule shell and segregate in a blend. Pantothenic acid is hygroscopic. A fine powder exposes more surface to the air than a coarse one, so an open drum in a humid room takes up water faster at 80 mesh than at 40 mesh. Granulation binds the fines into larger particles and usually improves flow and reduces dust, but it can slow dispersion in a stick pack and it adds a different particle-size line to the certificate. Sieve results depend on the sieve, the shaking time and the sample size. A laser diffraction result is a distribution, not a sieve figure, so ask which method produced the number before comparing two suppliers. The methods library describes both approaches. ## The dose and the dosage form decide the grade A capsule carrying 5 mg of pantothenic acid needs very little powder inside a large fill. At that level the ingredient is a small part of the blend, which is exactly where segregation and uneven mixing appear. A diluted premix may even out the blend, but the carrier it brings lowers the assay per gram and forces a label change. A high-dose tablet or stick pack uses the undiluted powder instead. There the fill weight is mostly the ingredient, flow and dust count for more than dilution does, and the free acid's own acidity becomes a taste issue: its 5% solution sits at pH 2.5–3.5, sharp in a drink mix. Calcium D-pantothenate gives a solution closer to neutral, so the form decision lands on the sensory result before the grade decision does. Decide the form and the dosage form before the mesh. A direct-compression tablet wants flow and a coarse fraction; a hard capsule can take the 80 mesh powder; a stick pack wants a powder that disperses without lumps. ## What to write into the specification - “D-Pantothenic acid, CAS 79-83-4, C9H17NO5.” - “Assay 98.0–101.0% by HPLC; state the moisture basis on the certificate.” - “Identification by HPLC retention and IR spectrum; state the HPLC wavelength.” - “Loss on drying ≤5.0%; pH 2.5–3.5 in 5% solution.” - “Particle size ≥95% through 80 mesh; granulation, bulk density or flow only if agreed in writing.” - “Destination market and the form named in the market file confirmed before the order.” A specification that says only “vitamin B5 99%” has not named the form, the grade, the moisture basis or the mesh. The product page carries the catalog values; the level-four comparison covers the salt factor and the label; the vitamin B5 page describes the calcium salt; the quality page shows how the grade is released. ## When a different grade is the wrong choice If the market file or the label names calcium pantothenate, the free acid is not a drop-in. In the EU, the food-supplement directive lists the pantothenic acid forms in its Annex II; as of this review the free acid is not a separate entry, so the buyer's regulatory team has to confirm the route for the destination before the order. The compliance page sets out the framework. If the formula needs a neutral solution, the salt is the practical starting point; neutralising the free acid in the formula creates a pantothenate salt and changes the ingredient list. If the process needs a coarser or a finer powder than 80 mesh, the mill belongs in the agreement, not in a footnote. And a granulated grade is not a substitute for the standard powder in every process; it is chosen for flow or dust control, not because it sounds more finished. ### 02.1 Pantothenic acid vs calcium pantothenate: the assay, the water and the label URL: https://nutrition.rainwoodbio.com/products/vitamins/pantothenic-acid/grades/pantothenic-acid-vs-calcium-pantothenate/ Reviewed: 2026-11-20 Pantothenic acid and calcium pantothenate are two forms of the same vitamin with different CAS numbers, molecular weights, assay bases and label positions. The salt is 92.0% pantothenic acid by mass and carries 8.4% calcium at full assay; the free acid is the reference molecule and the form supplied on this page. Switching form changes the weigh-up, the water and the ingredient list. In one lineThe salt is 92.0% pantothenic acid by mass and the free acid is all of itself; the assay basis, the water and the label have to be read on the same form. ## Two forms, two identities Pantothenic acid is an amide of pantoic acid and β-alanine. The free acid carries the carboxyl proton; calcium pantothenate replaces two of those protons with one calcium ion, so the salt contains two pantothenic acid units per calcium. That difference gives each material its own CAS number, molecular weight and label name. D-Pantothenic acid against calcium D-pantothenate | Property | D-Pantothenic acid | Calcium D-pantothenate | CAS number | 79-83-4 | 137-08-6 | Formula | C9H17NO5 | C18H32CaN2O10 | Molecular weight | 219.23 | 476.53 | Pantothenic acid content | 100% of the molecule | 92.0% by mass | Calcium | None | 8.4% at full assay (catalog 8.0–8.6%) | Appearance and mesh | White to off-white powder, 80 mesh | White powder, 40 mesh | pH (5% solution) | 2.5–3.5 | Near neutral | Label name | D-Pantothenic acid | Calcium D-pantothenate | EU food-supplement list | Not a separate entry as of this review | Named in Annex II Both columns declare pantothenic acid on the nutrition panel. The difference appears in the ingredient list, in the mass on the balance and in the market file. ## The assay and the salt factor The conversion factor is fixed by the molecular weights: 438.46 ÷ 476.53 = 0.920. One milligram of calcium pantothenate at full assay carries 0.920 mg of pantothenic acid, and one milligram of pantothenic acid needs 1.087 mg of the salt. The factor belongs to the molecule, not to the certificate. Two worked examples show what that means at the balance. A label that declares 10 mg of pantothenic acid from the free acid needs 10 mg of the acid at full assay, before the moisture correction. The same label built on the calcium salt needs 10 × 1.087 = 10.87 mg of salt. If the salt lot assays 99.0% on the dried basis with 3.0% loss on drying, its as-is content is 0.99 × 0.97 = 96.0%, and the weigh-up becomes 10.87 ÷ 0.960 = 11.32 mg of powder. The free acid at the same assay and moisture needs 10 ÷ 0.960 = 10.41 mg. The two corrections are separate. The salt factor changes the molecule; the moisture factor changes the mass on the balance. Applying one and not the other is the common error. The certificate also has to say whether its assay is as-is or on the dried basis, because the catalog range alone does not settle that. ## The water in both forms Both catalogs set loss on drying at ≤5.0%, and both materials are hygroscopic. The free acid is supplied here at 80 mesh, finer than the salt at 40 mesh, so it exposes more surface and takes up moisture faster from an open pack. The water raises the loss on drying, lowers the as-is assay and can cake the powder; at the balance it is the difference between 10.0 and 10.4 mg in the example above. Moisture also changes the label arithmetic when the assay is quoted on the dried basis. The certificate should pair the assay with the measured loss on drying, and the specification should state the basis. A result close to the 5.0% limit leaves less room for pickup in a humid warehouse, and the pouch or drum has to be resealed promptly. The free acid and the salt both need a sealed, dry pack, and the solution stability depends on pH rather than on which form was weighed. The stability page sets out the conditions. ## What the label has to say The nutrition declaration uses the nutrient name “pantothenic acid”: the EU reference intake is 6 mg under Regulation (EU) No 1169/2011, and the US daily value is 5 mg in the Supplement Facts panel. “Vitamin B5” is a synonym, not the nutrient name on the panel. The ingredient list is where the form appears. It should say D-pantothenic acid or calcium D-pantothenate, because that is what was weighed. A label that declares pantothenic acid while the ingredient list names only vitamin B5 has not identified the material, and a label built on the salt but written with the free-acid name is a mismatch that the certificate cannot repair. In the EU, Directive 2002/46/EC lists the permitted pantothenic acid forms in Annex II; as of this review it names calcium D-pantothenate, sodium D-pantothenate, dexpanthenol and pantethine, and the free acid is not a separate entry. The buyer's regulatory team confirms the route for the destination and checks the current text. The compliance page lists the documents. ## Handling, taste and the dosage form The free acid gives an acidic 5% solution at pH 2.5–3.5. In a capsule that is invisible; in a stick pack or a drink mix it is a sharp taste that the formulator has to manage. The calcium salt gives a solution nearer neutral and may be the easier choice for a beverage, at the cost of the salt factor and the calcium contribution: 500 mg of pantothenic acid from the salt carries about 46 mg of calcium. The physical grades differ as well. The free acid is an 80 mesh powder and the salt a 40 mesh powder, so their flow, dust and dispersion are not the same. A direct-compression tablet may prefer the coarser salt; a hard capsule can take either; a stick pack needs a powder that disperses without lumps. Granulation is available on request for the free acid, and it changes the physical lines, not the assay. The free acid is not a drop-in for the salt: the mass, the pH, the taste and the label all change, so a switch needs a written change control, a new specification and a label review. The identity page gives the tests that separate the forms. ## When to choose which Choose the free acid when the label names it, the destination route covers it, the acidic taste fits the dosage form, and the lower mass per serving is useful. It is the form supplied here, specified at 98.0–101.0% by HPLC with loss on drying, pH and 80 mesh. Choose calcium pantothenate when the market file or the label is written around the salt, when a near-neutral solution is needed, or when the calcium contribution is acceptable. It is a different purchase with a different assay basis and a different certificate; the calcium figure and the salt factor belong in the specification. The product hub carries the free-acid specification; the vitamin B5 page carries the calcium salt; the grades page places both in the wider range; the methods library describes the assays; the quality page describes the release workflow. ### 03 Pantothenic acid stability: the dry pack and the acidic solution URL: https://nutrition.rainwoodbio.com/products/vitamins/pantothenic-acid/stability/ Reviewed: 2026-11-20 The dry powder is stable in a sealed pack; the solution is the fragile format. Pantothenic acid is hygroscopic, and in water its amide bond hydrolyses faster as the pH moves away from the 5.5–7 window. The free acid's own 5% solution sits at pH 2.5–3.5, so a solution hold has to be validated rather than assumed. In one lineWater is the powder's problem and pH is the solution's problem: the sealed pack controls the first, and a measured hold time controls the second. ## The powder: moisture, caking and colour The catalog sets loss on drying at ≤5.0%. That is a release gate, not a storage allowance. Pantothenic acid is hygroscopic, and once the pouch is opened the powder can pick up water from the air. The loss on drying rises, the as-is assay falls, and the powder can cake into lumps that no longer flow through a capsule machine. The 80 mesh grade exposes more surface than a coarse powder, so it takes up moisture faster. Keep the powder in its original sealed pouch, or in an opaque container that closes tightly, and let a cold pack equilibrate to room temperature before opening so that condensation does not form on the powder. A clear jar on a bench is not a storage container for this material, however convenient it looks. Colour is a weak signal. White to off-white covers a range, and a shift within it is not a failure by itself. A yellow or brown cast, together with a rising loss on drying or a falling assay, is a reason to look at the storage history rather than at the colour alone. ## The solution: pH, hydrolysis and heat Pantothenic acid is an amide of pantoic acid and β-alanine. In water the amide bond can hydrolyse, and the rate depends strongly on pH; published stability work puts the optimum near pH 5.5–7. The free acid's 5% solution is at pH 2.5–3.5, outside that window, so a stock solution held at its own pH is not the same stability case as a buffered formula at pH 6. If a liquid format is needed, buffer the formula into the stable window where the label and the taste allow, keep the heat load low, and measure the hold time at the process pH. Heat accelerates hydrolysis, so a pasteurisation or hot-fill step has to be part of the validation, not an afterthought. Neutralising the free acid with a base produces a pantothenate salt in the formula. That may be the right formulation decision, but it changes the ingredient that is declared; the label has to name what is actually in the bottle. Light is a secondary factor for the solid; in solution, pH and heat dominate. ## What drives degradation Factors that move pantothenic acid during storage | Factor | What it does | Control | Moisture | Raises loss on drying; lowers the as-is assay; causes caking | Sealed pouch; dry store; reseal promptly | pH | Moves the hydrolysis rate in solution | Buffer into the 5.5–7 window where possible | Heat | Accelerates hydrolysis and moisture damage | Controlled store; low process heat load | Hold time | Lets hydrolysis accumulate before filling | Validate the hold at the process pH | Matrix | Other ingredients can change pH and water activity | Test the finished formula, not only the powder | Pack | The seal and the liner decide the moisture barrier | Foil pouch; intact liner; record the opening date These factors act together. A warm, humid store is worse than either condition alone, and a solution at pH 3 held warm combines the two drivers that matter most. The useful question is not whether pantothenic acid is stable in general, but how long it holds in this pack, at this pH and at this temperature. ## A stability protocol for the ingredient The protocol has to pin down four things before it starts: pack, storage condition, time points and test panel. For the warehouse, use a long-term arm at 25 °C/60% relative humidity and an intermediate arm at 30 °C/65% relative humidity; for the pack stress, add an accelerated arm at 40 °C/75% relative humidity. The solution arm runs at the formulation pH, and the process heat load is applied before time zero. At every time point, measure assay, loss on drying, pH, appearance and microbiology. A stick pack or a beverage needs its own matrix run, because neither a solution nor a hygroscopic blend inherits the powder result. Ask for the individual figures per point rather than a single pass line, and for the pack and lot family to be named in the report. Request the summary for the exact pack on the order. A 1 kg foil pouch and a 25 kg fiber drum differ in headspace and in how often they are opened, so data from one does not describe the other. ## The finished formula changes the answer Low water activity at the start does not keep a capsule or tablet dry: the shell and the excipients can still pass moisture into the fill. Measure loss on drying at release and again after storage, alongside appearance and powder flow. A hygroscopic fill may soften the shell or stick to the punch. A stick pack fails at the seal: a pinhole in the foil is enough, and the strip has to be inspected as well as the powder. A beverage combines pH, heat and hold time; the free acid's acidity is also a taste decision. The formulator decides whether an overage is needed, but an overage does not repair a pack that lets moisture in or a process that holds the solution warm for too long. ## How the shelf life is set No single shelf-life value is published here, because it is a property of the pack and the storage condition, not of the molecule alone. The retest period that applies is written on the specification and backed by a stability file for that exact pack. A number offered without a pack, a condition and a test panel is an assertion, not a shelf life. Once the retest period ends, re-assay the retained sample before any extension; do not extend on assumption, and do not move a bulk figure onto a repacked container. The product hub shows the packs offered; the COA page explains which tests appear on the certificate; the MOQ page ties pack size to lead time; the methods library has the HPLC assay note; the vitamin B5 page covers calcium D-pantothenate; the quality page describes how the release file is assembled. ### 04 Pantothenic acid MOQ: 1 kg, packs and lead time URL: https://nutrition.rainwoodbio.com/products/vitamins/pantothenic-acid/moq/ Reviewed: 2026-11-20 The minimum order is a single 1 kg foil pouch; the bulk pack is a 25 kg fiber drum. Standard-pack lead time is 1–7 days. Six details make a quotation firm: the form and CAS number, assay basis, pack and quantity, destination and Incoterm, documents, and the intended market. In one lineOne kilogram is the qualification unit: enough material to test, retain and trace, and the smallest pack that keeps a lot code intact. ## Why the minimum is 1 kg One kilogram is enough for a bench trial, a retained sample and an independent identity check. It also ships as a parcel, so a formulator can start work before the production plan is locked. The pouch is a finished commercial unit with its own lot code; it is not a scoop taken from a drum. An order under 1 kg is normally split out of a larger batch and repacked. The chemistry does not change, but the split adds handling, discards the original pack identity and weakens the traceability chain. The 25 kg drum is the bulk unit: handling per kilogram falls, while inventory commitment rises, and because pantothenic acid is hygroscopic a big stock must stay sealed and dry for longer. The MOQ is a pack decision, not a volume incentive. A buyer who needs 300 g for a trial should ask for a documented split with its own lot code, not use the 1 kg pouch as a demonstration. ## Packs and formats Standard pantothenic acid packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal promptly after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on the drum and the liner | Granulated powder | On request | Better flow, less dust | Particle profile changes; assay and pH unchanged The catalog form is an 80 mesh powder: at least 95% passes 80 mesh. A granulated grade is a separate physical specification rather than a packing option. If the line needs better flow or less dust, raise it before the quotation: granulation shifts the particle-size line and can shift the lead time too. ## Lead time and dispatch The standard pack is quoted at 1–7 days after order confirmation. Inside that window sit picking, document preparation and dispatch; outside it sit transit, customs clearance and the customer's own quality release. A granulation run or a non-standard pack needs extra time, which the quotation should show on its own line. Get the dispatch date in writing, not only the 1–7 day range. The 1 kg pouch leaves as a parcel and the 25 kg drum as a pallet, and the Incoterm fixes who books freight and who clears entry. Lot documents — COA included — belong on the same journey as the pack, not in a later email. ## What a quotation needs Six items make a quotation firm enough to compare: - Product and form. D-Pantothenic acid, CAS 79-83-4, with the free acid written out. - Specification. Assay basis, loss on drying, pH, particle size, heavy metals and microbiology. - Quantity and pack. A 1 kg pouch, a 25 kg drum, or a granulated grade. - Destination and Incoterm. Country, the port or delivery address, and the agreed trade term. - Documents. COA, specification, SDS, plus any statement the importer's market requires. - Intended use and market. Supplement, food or another use, and the country where it will be sold. A quotation that leaves out the market or the form cannot be compared. The same free-acid powder can fit one destination and fall outside another destination's file, so the document set belongs in the offer itself. Commercial terms appear on the quotation, not here. ## The sample is a lot, not a demonstration The 1 kg pouch is the qualification sample. Before scaling, test identity, assay, loss on drying, pH and microbiology, and retain material from the same pouch. Sample, COA and quotation should all carry the same lot code; when that link is missing, the sample demonstrates a powder but does not qualify a lot. A trial below one kilogram is a repack, not the catalog pouch. It comes out of a bulk lot, carries a handling record of its own and must not be described as the 1 kg foil pack. Ask for the split in writing and file its lot code with the trial data: the bench powder and the production drum can be different lots even when the specification matches. ## Terms to settle before the first order Commercial and quality terms belong on one page: Incoterm, pack, dispatch window, specification revision, a COA per lot, the retained sample, the retest period and the change route. Put them into a quality agreement before the first production order, because the same conversation is much harder once a dispute has started. When a lot falls outside the agreed specification, the evidence route is the retained sample and a joint re-test on the method named in the specification — not a photograph of the drum. The quality agreement should name the referee laboratory, say who pays it and record that both sides accept it. A return argued from appearance alone is difficult to defend for either party. The product hub holds the catalog specification; the COA page names the release tests; the compliance page assembles the market files; the MOQ glossary entry defines the term; the vitamin B5 page follows the calcium salt; the methods library explains the assays; and the quality page describes the release file. ### 05 The regulatory file for D-pantothenic acid URL: https://nutrition.rainwoodbio.com/products/vitamins/pantothenic-acid/compliance/ Reviewed: 2026-11-20 D-Pantothenic acid is supplied as the free acid, CAS 79-83-4. The specification and the COA describe the material; the regulatory file has to show that the destination accepts that form, under which name and at what level. The buyer's regulatory team confirms the route; this page lists the framework and the documents that belong in the folder. In one lineThe specification describes the free acid; the market file has to show that the destination accepts that form, under that name and at that level. ## What the file contains A working folder for the free acid has four moving parts: the current specification sheet, the lot certificate, the destination's limits and label rules, and a written trail for any change of manufacturing site, process or pack. The COA is a lot record, the TDS repeats the specification and the SDS addresses handling; none of the three contains the market decision, so keep that decision as its own signed note. The form is part of that route. Pantothenic acid is the nutrient name, but the market file may be written around a particular salt. The free acid and calcium D-pantothenate are the same vitamin in different chemical forms, with different CAS numbers, assay bases and ingredient-list names. A file that names only “vitamin B5” has not fixed which form it covers. Keep a versioned document list at the front of the folder. When a specification revision or a pack change arrives, the list is what shows which certificate and which label review were current at the time of shipment. ## European Union For the EU, the food-supplement framework is Directive 2002/46/EC. Annex I lists the vitamins and minerals that may be used, and Annex II lists the permitted substances; as of this review, the pantothenic acid entries in Annex II name calcium D-pantothenate, sodium D-pantothenate, dexpanthenol and pantethine. The free acid is not a separate entry. Whether a free-acid grade can be placed on the market as a pantothenic acid source is therefore a question for the buyer's regulatory team, and it should be resolved before the label is written; check the current consolidated text, because the list can change. Regulation (EU) No 1169/2011 sets the reference intake for pantothenic acid at 6 mg and uses the name “pantothenic acid” in the nutrition declaration. Contaminants are governed by Regulation (EU) 2023/915, which replaced Regulation (EC) No 1881/2006. The EU regulatory notes collect the framework references. ## United States For a US shipment, the question is its status as a dietary ingredient and whether the intended use sits inside that status. The supplier should write down the legal basis and the document it rests on; the buyer then checks that the same basis reaches the finished product and the Supplement Facts panel. That panel declares pantothenic acid at a daily value of 5 mg, while the ingredient list names the form that was actually weighed. Manufacture and release sit under the dietary-supplement cGMP rule in 21 CFR 111. A structure/function statement carries its own substantiation file and the DSHEA disclaimer; the certificate does not review either the label or the claim. The US regulatory notes collect the framework references. ## Label and ingredient list The nutrition panel declares pantothenic acid; the ingredient list names D-pantothenic acid. If the formula uses the calcium salt, the list says calcium D-pantothenate, and the salt factor and calcium figure have to be consistent with the declared amount. “Vitamin B5” is a synonym, not the nutrient name on the panel. Three numbers have to agree: the declared pantothenic acid per serving, the form named in the ingredient list, and the assay basis on the certificate. A label built on the free acid but a market file written around the salt is a mismatch that no certificate can repair. The form comparison sets out the conversion. ## Contaminants and limits Read the contaminant panel as a finished-product sum, not a drum-only result. The table below is a starting reference for a supplement file; the destination's current text and the daily dose settle the number that applies. Contaminant limits to confirm for the finished product | Analyte | Supplement-level reference | Evidence to hold | Lead (Pb) | 3.0 mg/kg in the supplement | Lot result and method, with the limit recalculated for this dose | Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result, plus any category exception for the supplement | Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result with the analytical method named | Arsenic (As) | Customer or market limit | The agreed limit and its method, both printed on the certificate The catalog limits — Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg — are release gates for the ingredient. They are not automatically the finished-product limits, because the daily dose and the matrix change the calculation. Microbiology belongs in the same review: the counts and absence statements on the COA are ingredient results, and the finished product has its own specification. ## Claims No disease-related claim is made for this ingredient on this site. In the EU, authorised function claims for pantothenic acid exist and are tied to source conditions, including the 15% reference-intake threshold per portion; the exact wording, the serving and the qualification are the brand's review. In the US, a structure/function statement needs substantiation and the DSHEA disclaimer. Energy or metabolism language is mechanism language, not an authorisation, and a claim revision never reopens the specification. ## Documents for the file The buyer's folder needs the COA with the HPLC assay and its basis, the IR identity, loss on drying, pH, heavy metals and microbiology; the TDS with the same specification version; the SDS; the allergen, GMO, origin and residual-solvent statements as applicable; and a written statement that the material is the free acid, not a salt or a blend. Add the destination route and the label review. The specification must name D-pantothenic acid, CAS 79-83-4 and the assay basis; a certificate that says only “pantothenic acid 99%” has left the form and the moisture basis open. The product page carries the catalog specification, the COA page explains the lot certificate and the quality page describes the release file. ## Checklist before the first order - Specification version, CAS number and the free-acid form are named. - COA, TDS, SDS, allergen, GMO, origin and residual-solvent statements sit in the folder. - Contaminant results are recalculated against the finished-product dose. - The label declares pantothenic acid and the ingredient list names the free acid. - The destination route for the free acid has been confirmed in writing. - The quotation, the specification and the certificate refer to the same version. The vitamin B5 page shows how the calcium salt handles the same framework, and the methods library describes the tests behind the certificate. ### 06 How to prove a pantothenic acid lot is the free acid URL: https://nutrition.rainwoodbio.com/products/vitamins/pantothenic-acid/identity/ Reviewed: 2026-11-20 A pantothenic acid lot is the free acid when the document names CAS 79-83-4, the HPLC retention and IR spectrum match the reference, the 5% solution is acidic, and the moisture and assay close the mass balance. The assay alone cannot separate the free acid from the calcium salt, the sodium salt or a dilution; the pH and the counter-ion tests can. In one lineIdentity is a set of agreeing measurements: IR and retention say pantothenic acid, the acidic solution says the free acid, and the calcium or sodium figure rules out a salt. ## The identity layers A certificate can name the right material without proving that the powder is that material. The layers below answer separate questions, each with its own evidence; a supplier who answers only the first has described paperwork, not powder. Layers of D-pantothenic acid identity | Layer | Question | Test | What it establishes | Document | Is the form named? | Name, CAS number, formula | Paperwork only | Chromatography | Is the molecule pantothenic acid? | HPLC retention with the wavelength stated | The molecule | Spectroscopy | Do the functional groups match? | IR against a reference spectrum | The acid and amide bands | Form | Is it the free acid? | pH of a 5% solution; calcium and sodium by ICP-OES | The counter-ion | Mass balance | Is it diluted? | Assay, loss on drying, impurities | Consistency of the numbers The IR layer is the strongest single check for this molecule because it shows both the carboxyl group and the amide. The HPLC layer is weaker on its own: pantothenic acid has no strong chromophore, so a method at a poorly chosen wavelength can see very little. Ask for the wavelength and the standard, not only a retention time. ## The 0.920 ratio and the counter-ion The calcium salt contains two pantothenic acid units per calcium ion. At full assay, 476.53 g of calcium pantothenate carries 438.46 g of pantothenic acid, which is 92.0% by mass. The calcium figure at full assay is 8.41%, and the catalog range of 8.0–8.6% is set around it. Those two figures give a useful ratio: calcium percentage divided by assay percentage, on the same basis, sits near 0.084 for the pure salt. For the free acid the check runs the other way. There is no calcium and no sodium in the molecule, so a calcium result above the method's detection limit points to the salt, a blend or a calcium-rich diluent. A sodium result does the same for sodium pantothenate. Read the counter-ion against the assay: a blend of salt and free acid can be built to land inside the assay range, but its calcium figure falls in proportion to the salt fraction. The pH supports the same conclusion. A 5% solution of the free acid sits at pH 2.5–3.5; a pantothenate salt gives a solution nearer neutral. The pH is not a quantitative ratio, because concentration and residual acid move it, but a neutral pH on a lot sold as the free acid is a reason to test the counter-ion. Chirality is a separate question. D- and L-pantothenic acid have the same IR spectrum and the same retention on an achiral HPLC column. If the D-form is contractual, ask for specific rotation on the dried basis; the catalog identity lines do not separate the enantiomers. ## X-ray diffraction and the solid state X-ray diffraction answers a different question: is the powder crystalline, and does its pattern match a reference? It can distinguish a crystalline solid from an amorphous one and can reveal a crystalline carrier in a blended or diluted grade. It is not a purity assay and it does not measure the counter-ion. For a free-acid powder, the diffractogram earns its place when the solid form is contested or a second source is being qualified. Before accepting a “match”, ask which reference pattern was used and how low the method can detect a second phase. A certificate that states “XRD conforms” but attaches neither pattern nor reference has told the reader almost nothing; XRD is not a routine release test here. ## What adulteration looks like Common pantothenic acid substitutions and the signals | Adulterant | What it does | Signal | Test | Calcium pantothenate | Adds calcium; raises pH toward neutral | Calcium present; pH above the free-acid window | Calcium by ICP-OES, pH | Sodium pantothenate | Adds sodium; raises pH toward neutral | Sodium present; pH shift | Sodium by ICP-OES, pH | D-Panthenol | A different molecule with a similar name | Different retention and IR; no acid pH | HPLC, IR | L- or DL-pantothenic acid | Same spectra and achiral retention | Rotation differs from the D-form | Polarimetry | Crystalline diluent | Lowers the assay per gram | Assay low; sharp carrier peaks in XRD | Assay, XRD, IR | Water | Raises loss on drying; lowers the as-is assay | LOD high; anhydrous assay normal | Loss on drying Colour is the least reliable signal. White to off-white covers a wide range, and a diluent can reproduce it. The stronger signals are the IR spectrum, the acidic pH, the counter-ion figure and the mass balance. A certificate that reports appearance and assay but leaves out identity has left the most likely substitution untested. ## How to write the identity into the specification - “D-Pantothenic acid, CAS 79-83-4, C9H17NO5.” - “Assay 98.0–101.0% by HPLC; state the moisture basis and the detection wavelength.” - “Identification by HPLC retention and IR spectrum, both against a reference.” - “pH 2.5–3.5 in 5% solution; loss on drying ≤5.0%.” - “Calcium and sodium below the stated limit, or reported with the method, where the form is to be confirmed.” - “Specific rotation on the dried basis where the D-form is contractual.” - “Destination market and form confirmed before the order.” ## Five questions for the supplier - Is this lot the free acid, and what CAS number does the certificate carry? - Will you send the IR spectrum and HPLC chromatogram, with the wavelength and the standard used? - What are the calcium and sodium results, and what method produced them? - What is the pH of a 5% solution, and what is the loss on drying for this lot? - If the D-form is disputed, will you provide specific rotation and accept a joint re-test on the retained sample? Five direct answers amount to an identity file; one assay percentage does not. The product hub holds the catalog data; the COA page maps each release figure onto the certificate; the grades page puts the free acid beside the salt; the level-four comparison works through the label arithmetic; the methods library explains the HPLC and ICP-OES tests; the vitamin B5 page covers the calcium salt; and the quality page describes the release file. ### 01 What the COA for porcine collagen peptides actually contains URL: https://nutrition.rainwoodbio.com/products/protein-collagen/porcine-collagen-peptides/coa/ Reviewed: 2026-11-20 The porcine collagen certificate has to settle three things that cannot be seen in the powder: how the protein figure was calculated, how much of the material is actually peptide, and which porcine tissue the lot came from. The catalogue limits are fixed; the batch COA shows where the lot landed. A sheet that reports only a protein percentage leaves the other two questions open. In one lineA protein figure calculated with N × 5.55 and a peptide figure measured by SEC answer different questions, and both are needed before a porcine collagen lot can be released. ## The parameters on the sheet The release sheet has nine lines, and they fall into three groups: what the powder is, how much peptide it contains, and what must be absent. The table records the catalogue limits for this product; it is not a lot result. COA parameters · porcine collagen peptides, catalogue specification | Parameter | Method | Release limit | Appearance | Visual | Off-white to pale yellow powder | Protein | Kjeldahl, N × 5.55 | ≥90.0% | Peptide content | SEC-HPLC | ≥80.0% | Molecular weight | SEC-HPLC | ≥80% below 3,000 Da | Loss on drying | Gravimetric | ≤7.0% | Ash | Gravimetric, furnace | ≤5.0% | Heavy metals (Pb, As, Cd, Hg) | ICP-MS, reported element by element | Pb ≤3 mg/kg; As ≤2 mg/kg; Cd ≤1 mg/kg; Hg ≤0.1 mg/kg | Microbiology | Aerobic plate count; absence tests as listed | APC ≤1,000 cfu/g; yeast/mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% passes 80 mesh Two of the lines are words rather than numbers. The species and the tissue belong on the certificate because CAS 9007-34-5 covers collagen from any animal, and a specification that stops at the CAS number has not told the buyer what the drum contains. ## The factor and the basis behind the protein figure Kjeldahl reports nitrogen, not protein. The laboratory converts the nitrogen with a factor, and collagen takes 5.55 because its nitrogen content is close to 18%. The 6.25 factor used for many foods assumes 16% nitrogen and would turn the same titration into a figure roughly 12.6% higher. A 90.0% collagen result becomes about 101% under the general factor; nothing in the powder has changed. There is a second convention to pin down. The 90.0% limit can be read on the powder as received or after drying, and the certificate has to say which. With loss on drying at the 7.0% ceiling, 90.0% on the dried basis equals about 83.7% as-is. Two compliant certificates can therefore show different percentages for the same material, and a buyer comparing one with the other will draw the wrong conclusion unless the basis is printed. Nitrogen also arrives from non-protein sources. Urea, ammonium salts and other nitrogen compounds lift the Kjeldahl figure without adding collagen, which is why the peptide result belongs beside it rather than in a separate section. ## Release limit versus batch result A limit is a boundary; a result is a measurement. The certificate is useful only when the two are separated, the method is named, and the result is a number rather than the word “conforms”. The peptide content and the molecular-weight distribution are not the same line. The first measures how much of the powder is peptide rather than free amino acids or other solids; the second measures how far the hydrolysis has gone. A lot can reach 80.0% peptide and still carry a high-molecular-weight tail, and the tail matters for dissolution and for the mouthfeel of a drink. Ask for the measured fractions, not only the cut-off. Ash is a ceiling of 5.0% for this product. Skin-derived collagen normally sits well below it, so a result near the ceiling points to the raw material or the washing step and deserves a question before the lot is accepted. ## What moves between batches Lot-to-lot movement starts upstream. Porcine skin reaches the plant wet and fatty, and its fat, colour and microbial load depend on the animal, the chill and the delay before processing. Fat left in the material becomes an odour; colour left uncontrolled produces a pale-yellow lot next to an off-white one. The hydrolysis then sets the curve. Enzyme dose, temperature and time decide how much of the collagen falls below 3,000 Da; filtration and concentration decide how much of that fine fraction reaches the dryer. The dryer fixes moisture, colour and particle size, and the 80 mesh result can shift with a new mill or sieve while the chemistry is unchanged. Appearance is the least numerical line and often the first warning. A dull or darker powder can follow a longer heat exposure or a browning reaction with a reducing sugar, even when the assay passes. Keep the retained sample and the process record before rejecting a lot on colour, and confirm that the certificate's lot code matches the pack. ## When an outside laboratory earns its fee An outside laboratory is worth paying when the source is new, when a regulated market receives its first shipment, when the certificate does not support a species claim, or when a result is contested. The panel should close the open question rather than reproduce the whole sheet: protein with its factor and basis, the SEC curve, hydroxyproline as a collagen marker, a PCR on the raw tissue where the animal is in doubt, ICP-MS for the metals and the micro count. Hydroxyproline is not on the catalogue limit list, but it is the most direct chemical evidence that the protein is collagen. Read against the protein figure, it catches a powder that reaches the nitrogen limit with a protein that is not collagen. It cannot name the animal, because porcine, bovine and fish type I collagens all contain it. Every screen needs a detection limit. A “not detected” entry without one describes the method's sensitivity, not the lot, and a PCR that fails on a hydrolysate may reflect degraded DNA rather than a different source. ## Six lines to compare between suppliers Six lines make a supplier comparison: species and tissue; protein factor and basis; peptide content plus SEC distribution; moisture, ash and mesh; metals and microbiology; and the source documents, including the porcine declaration and the religious-use statement. A quotation that matches on protein but differs on the other five is a different material. The certificate also has to connect to the batch. The plant, the raw batch, the hydrolysis and drying record and the retained sample are what let a buyer trace a drum backwards; a correct sheet can still belong to another lot. The catalogue range is on the porcine collagen peptides product page. The tests that support the species claim are on the identity page; the source and label questions are on the compliance page; the chromatographic and nitrogen methods are described in the methods section; the quality page describes how a lot is released. ### 02 Porcine collagen peptides: the grades and what changes between them URL: https://nutrition.rainwoodbio.com/products/protein-collagen/porcine-collagen-peptides/grades/ Reviewed: 2026-11-20 Porcine collagen peptides are supplied as a standard 80 mesh powder, with a granulated powder on request. The grade question is not a different protein: every grade here carries the same porcine skin type I source and the same ≥90% protein and ≥80% peptide window. What changes is the peptide curve and the particle size, and those decide how the powder flows, wets and dissolves in the dosage form. In one lineThere is one porcine source and one protein window here; the grade decision is the peptide curve and the particle size, because those are what change in the drum. ## Why a collagen peptide still has grades “Collagen peptides” describes a family of hydrolysates, not one grade. Across the category, the source, the tissue, the peptide curve and the particle size all move, and each one changes the label or the process. On this product the source and the tissue are fixed, so the grade decision narrows to two variables: how far the collagen is hydrolysed, and how the powder is finished. Those two variables are not cosmetic. A finer peptide curve wets faster and dissolves more cleanly, and it can taste less broth-like because fewer large peptides remain. A coarser curve keeps more high-molecular-weight material, which can thicken a solution and change the mouthfeel. Granulation improves flow and cuts dust, but it makes the powder slower to wet. The grade is a formulation decision before it is a purchasing one. ## The standard powder and the granulated form The catalogue form is the 80 mesh powder; the granulated variant is made on request. Both are the same hydrolysate, and both are packed in the same 1 kg pouch and 25 kg drum. What changes between the standard powder and the granulated form | Property | Standard powder | Granulated on request | Description | Spray-dried hydrolysate, 80 mesh | Granulated hydrolysate | Particle size | ≥95% through 80 mesh | Coarser granule, stated on the specification | Flow and dust | Free-flowing, dusty when poured | Low dust, better flow | Wetting and dissolution | Wets quickly, dissolves with moderate mixing | Slower to wet, needs more mixing | Typical use | Capsules, tablets, sticks and drink mixes | Blending and tableting where dust is a problem | Documentation | Catalogue specification | Separate specification line; lead time confirmed Granulation is a specification change, not a packing choice. It shifts the particle-size line and can also change the bulk density, the wetting time and the lead time. If the dosage form needs it, say so before the quotation, and ask for the particle-size result on the granulated lot rather than assuming it matches the powder. ## What 80 mesh means in handling The 80 mesh figure means that at least 95% of the powder passes a sieve with 80 openings per linear inch, roughly 177 µm. It is a fine powder: it dusts when poured, it wets quickly, and it can bridge in a hopper. Bulk density and flow are not on the catalogue sheet, so they are worth measuring on the sample if the process is sensitive to them. The powder is off-white to pale yellow, free-flowing, and mildly odorous. It is hygroscopic, so an open bowl on the bench is a moisture pickup as well as a dust source. In water it dissolves to a clear to slightly opalescent solution; a hazy solution can come from a high-molecular-weight fraction, from undissolved powder or from the dose, and the grade alone does not explain it. The physical tests do not change the chemistry. A granulated lot should still meet the same protein, peptide and contaminant lines; if granulation introduces a carrier, that carrier is a new specification item and a new label question. ## Matching the grade to the dosage form For capsules and tablets, the 80 mesh powder blends well with excipients and sits in a fill weight measured in grams. The granulated form is easier to handle where dust is a problem or where the blend has to flow on a high-speed press, but it wets more slowly when the tablet disintegrates. Neither grade changes the declared protein per serving; the grade changes the process, not the number on the label. For sticks and drink mixes, the fine powder is the practical starting point because it wets and disperses quickly. A granulated powder can be used, but the mixing time and the clarity of the drink have to be checked at the target dose. For a ready-to-drink beverage, the peptide curve matters more than the mesh: a high-molecular-weight fraction can haze or thicken the drink over its shelf life. The grade does not set the dose. The finished product's serving size and the label are separate decisions, and the brand's reviewer checks them. This page describes the powder, not a serving recommendation. ## Writing the grade into the specification Write the grade with the source, the curve and the mesh, not with the product name alone: - “Porcine collagen peptides, type I, porcine skin; CAS 9007-34-5.” - “Protein ≥90.0% by Kjeldahl with N × 5.55; basis stated on the certificate.” - “Peptide content ≥80.0% and ≥80% below 3,000 Da by SEC-HPLC; fractions reported.” - “Loss on drying ≤7.0%; ash ≤5.0%.” - “Particle size ≥95% through 80 mesh, or the granulated variant's stated size.” - “Heavy metals and microbiology as listed; species and tissue declared.” - “Packs: 1 kg foil pouch, 25 kg fiber drum.” A specification that names “collagen peptides” and a mesh has not named the species. On a porcine lot the species is the first line, because it decides the label and the religious-use position as well as the analysis. ## When the grade cannot solve the problem No grade fixes a source problem. If the label, the market or the consumer requires a non-porcine material, the granulated form is still porcine and no certificate changes that. The alternative is a different product: bovine collagen peptides or fish collagen peptides, with their own files. The porcine versus bovine comparison sets out those positions. The standard window is also not a custom curve. If the application needs a tighter peptide target or a different mesh, the specification can be agreed at that target, but it becomes a separate grade with its own sample and lead time. Ordering the standard powder and milling it later moves the particle size without a new release file, which is the wrong way round. The catalogue entry is on the porcine collagen peptides product page; the release lines are on the COA page; the source and label questions are on the compliance page; the packs and lead time are on the MOQ page. ### 02.1 Porcine collagen vs bovine collagen: two sources, two label positions URL: https://nutrition.rainwoodbio.com/products/protein-collagen/porcine-collagen-peptides/grades/porcine-collagen-vs-bovine-collagen/ Reviewed: 2026-11-20 Porcine and bovine collagen are both type I hydrolysates built from the same amino acids, and either can be made to meet a similar peptide window. The certificate therefore rarely decides between them. The source decides two different files: porcine carries a religious-use position, bovine carries a TSE/BSE position, and the label has to name the species either way. In one lineThe chemistry is close enough that the certificate cannot choose; the species decides the religious-use file or the TSE file, and the species name on the label. ## Why the certificate cannot choose for you Both materials are type I collagen, both are rich in glycine, proline and hydroxyproline, and both are hydrolysed to a peptide powder that dissolves in water. At the level of the release sheet the two can look identical: protein ≥90% by Kjeldahl with N × 5.55, a peptide fraction, a molecular-weight distribution, moisture, ash, metals and microbiology. A specification written for one source can be met by the other. The species is not a line on the certificate. Protein chemistry does not separate porcine from bovine once the collagen has been hydrolysed, and the amino acid windows overlap. A species-specific PCR can work on the raw tissue; on a hydrolysate the DNA may be fragmented enough that a negative result says more about the sample than about the source. So the species claim rests on the chain: the raw material received, the plant that ran it, the separation from other species, and the declaration that ties the lot to the tissue. The certificate supports the chemistry. It does not choose the animal. ## The tissue is a second question The tissue is not the same decision as the species. Porcine collagen here is skin-derived. Bovine collagen can come from hide or from bone, and the two carry different ash, colour and non-technical files. Bone carries more mineral and more TSE scrutiny; hide is lower on both counts. What the tissue changes | Source | Typical tissue | In the drum | Non-technical file | Porcine | Skin | Skin-derived; pale colour | Religious-use statement | Bovine | Hide | Hide-derived; low ash | TSE/BSE statement | Bovine | Bone | Bone-derived; higher ash | TSE/BSE statement with more scrutiny A hide lot and a bone lot can both meet a bovine specification, so the tissue has to be named in the same way as the species. “Bovine collagen” on its own does not tell the buyer which file applies. ## The porcine position Porcine collagen is not halal and not kosher. The hydrolysis, the filtration and the drying do not change that, and no certificate can convert a porcine raw material into a permissible one. A pack that carries a halal or kosher mark cannot contain this material, and a supplier who offers such a certificate for a porcine lot is describing a different product. For a brand, the practical questions are the label, the market and the consumer. The ingredient list should name porcine where the source is material; some destination markets restrict or require a declaration for porcine-derived material; and a “porcine-free” claim cannot be supported on a line that handles porcine material without validated cleaning and segregation. The importer's regulatory team confirms the requirement before the order. Bovine material can be halal or kosher, but only with a certificate that covers the slaughter and the chain, not just the ingredient name. A halal certificate on the collagen is not a halal certificate on the finished product. ## The bovine position Bovine collagen brings a transmissible spongiform encephalopathy file. In the EU, Regulation (EC) No 999/2001 sets the rules for the prevention and control of TSEs, and the file has to show the country of origin, the tissue and the processing route. Bone carries more scrutiny than hide because the specified risk material rules are written around the central nervous system and the bones in contact with it. Porcine is not a ruminant species, so this material does not carry the same ruminant TSE file. That does not mean the question disappears: a customer who also handles bovine collagen may ask for a statement that the porcine line handles no ruminant material, and the answer belongs in the supplier approval file. Do not accept a generic “BSE-free” line without the country of origin and the tissue, on either source. ## What the label has to say The label names the species. In the EU, the ingredient list has to be accurate and the source is part of the identity when it is material to the consumer; in the US, the Supplement Facts panel carries the ingredient name. “Collagen peptides” alone is ambiguous where the pack also makes a source claim, and porcine collagen peptides are not a substitute for bovine collagen peptides on a pack that says bovine. “Type I” is a characterisation, not a release line. Both sources are predominantly type I, but a pack that prints it needs a characterisation report behind it. The same rule applies to “grass-fed”, “pasture-raised” or a named country of origin: each is a claim that the file has to carry. Allergen wording is a third position. Pork and beef are not on the EU list of 14 allergens or the US list of major food allergens, so neither source triggers a mandatory allergen emphasis in the way fish does. The brand's reviewer confirms whether a porcine statement is needed for its market and its consumers. ## The two source files The two files are not the same document with a different cover page. What each source file carries | Item | Porcine | Bovine | Species and tissue | Porcine skin, named | Bovine hide or bone, named | Religious use | Statement that the material is porcine and not halal or kosher | Halal or kosher certificate only if claimed, covering the chain | TSE/BSE | Statement that the line handles no ruminant material, where asked | Country of origin, tissue and TSE/BSE statement | Allergen | Pork not a listed major allergen; brand confirms | Beef not a listed major allergen; brand confirms | Release data | COA, TDS, SDS, change control | COA, TDS, SDS, change control Both files need the same release data, the same lot traceability and the same change-control record. The difference is the source-specific statement that sits on top. ## When to choose which Choose porcine when the market and the consumer accept a porcine source and when the bovine TSE file would be a burden the project does not need. Choose bovine when the product has to be halal or kosher, when the market excludes porcine material, or when the brand's existing file is already built around a bovine source. Choose fish when neither mammalian source fits, and accept the fish allergen declaration that comes with it. The choice is recorded in the specification, not in a conversation. Changing direction requires a written change control, a fresh specification, a new source declaration and a label review; the release limits may be identical while the file is not. The porcine product page carries this specification; the bovine collagen peptides page carries the other; the fish collagen peptides page is the third source. The compliance page covers the porcine file, and the grades page places the comparison in the wider range. ### 03 Porcine collagen peptides: moisture, heat and the pack that sets shelf life URL: https://nutrition.rainwoodbio.com/products/protein-collagen/porcine-collagen-peptides/stability/ Reviewed: 2026-11-20 Porcine collagen peptides take up moisture and react badly to heat. A sealed pack with a moisture barrier, kept cool and dark, is the format that holds up; once the powder is dissolved, the clock runs much faster. Shelf life is supported by stability work on the pack and condition actually used, not by the certificate or by a number borrowed from another collagen grade. In one lineMoisture is the variable that decides this powder's shelf life: it cakes, browns and feeds microbes, and the pack is the only barrier between the powder and the air. ## The powder: moisture, heat and colour Loss on drying is limited to ≤7.0% at release. That limit says nothing about how long the powder can sit open on a bench. A pouch that has been cut and folded lets humid air into the headspace; the moisture content climbs, lumps form, and the protein percentage measured as-is drops because water now counts in the weighed sample. The seal matters as much as the foil. The 1 kg pouch provides both the light and the moisture barrier, and its heat seal is the part that fails first. Once opened, either finish the pack within the in-use period or move the remainder into a smaller opaque container. The 25 kg drum depends on its inner liner: close the liner after each use, keep the drum off a damp concrete floor, and write the opening date on the label. Warmth speeds up the same processes. A normal warehouse is usually kind to a sealed pack; a loading bay in summer, a car boot or a glasshouse is not. If a pack has been stored cold, let it reach room temperature before opening so condensation does not settle on the powder. ## The solution: a different set of risks In water the powder gives a clear to slightly opalescent solution. That changes the risk profile: a protein solution supports microbial growth, so preservative choice, pH and hold time become the controlling variables, not moisture pick-up. Data from the bulk powder cannot be applied to a drink; the matrix, the heat process and the container each alter the rate. Heat is the other pressure. Pasteurisation or hot filling exposes the protein to a load the powder never meets, and a reducing sugar in the formula can drive non-enzymatic browning. The colour darkens first and the flavour follows. Prove the process temperature and hold time in the actual beverage, not in water alone. ## What drives degradation No factor acts alone. A warm, bright and damp store combines three stresses at once and can shorten the useful life far more than any one of them would. Storage factors for porcine collagen peptides | Factor | What it does | Control | Moisture | Lumps form; loss on drying climbs; as-is protein falls | Sealed pack; dry room; desiccant where humidity is high | Heat | Browning and odour develop faster | Cool storage; controlled process | Oxygen | Surface colour and smell change | Minimal headspace; sealed pack | Light | Colour shifts, particularly in solution | Foil or opaque container | Reducing sugars | Browning through the Maillard reaction | Pick excipients carefully; control water activity | pH (solution) | Clarity, colour and microbial behaviour change | Validate the pH of the matrix ## A stability protocol for the ingredient Write the protocol around the pack: storage condition, time points and tests. A long-term arm at 25 °C/60% relative humidity and an intermediate arm at 30 °C/65% relative humidity represent the warehouse; 40 °C/75% relative humidity puts stress on the pack. Add a light-exposure arm, because a dark incubator will never reveal a photolytic colour change. At each point, measure protein, the SEC distribution, loss on drying, appearance and microbiology. The distribution deserves a place because the protein figure can stay inside its range while the curve moves. For a stick pack or a drink, repeat the tests in the matrix, under the same heat load as the process. Report the individual results, not a single pass line, and name the pack and the lot family. The summary must belong to the pack you are buying. A pouch and a drum differ in surface-to-volume ratio, headspace and how often they are opened, so data from one does not describe the other. ## The finished formula changes the answer A capsule or tablet begins dry, but the shell and the excipients can still pass moisture into the fill. Measure loss on drying and appearance at release and after storage; if the fill browns easily, keep reducing sugars out of the excipient list. A stick pack usually fails at the seal, where a pinhole is enough, so the strip is checked, not only the powder. A gummy brings water, heat and sugar together, the combination that darkens collagen fastest. In a beverage, the formulator owns the pH, the preservative and the heat step, and the stability work has to happen in that drink. An overage is a labelling and stability choice; it cannot compensate for a pack that lets moisture through. The grades page explains which particle size suits which format. ## How the shelf life is set No single shelf-life figure is published for porcine collagen peptides, because the pack and the storage condition determine it. The retest period appears in the specification and rests on stability work for that pack. A figure quoted without a pack, a condition or a test panel is an assertion, not a shelf life. At the end of the retest period, re-test the retained portion before extending use. Never extend by assumption, and do not transfer a bulk figure to a container that has been repacked. The product page sets out the standard packs; the COA page explains the release tests; the MOQ page sets out the packs and dispatch; the methods section explains the analytical terms; the quality page describes release. ### 04 Porcine collagen peptides: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/protein-collagen/porcine-collagen-peptides/moq/ Reviewed: 2026-11-20 Porcine collagen peptides ship from a 1 kg minimum, packed as a 1 kg foil pouch; production volumes use the 25 kg fiber drum. Standard packs leave in 1–7 days. To convert an enquiry into a firm quotation, the supplier needs six details: the species and tissue, the specification with its nitrogen factor and peptide distribution, the quantity and pack, the destination and Incoterm, the documents, and the market where the finished product will be sold. In one lineThe 1 kg pouch is the minimum because it is the smallest unit that can be sampled, tested and traced to a lot; production scales on the 25 kg drum. ## Why the minimum is 1 kg A kilogram is enough for a bench trial, a retained sample and an independent check of identity, and it travels as a parcel before the production plan is fixed. That pack carries its own lot code; it is not a scoop taken from a drum. Smaller quantities are split from a larger lot and packed by hand. The material is the same, but the original pack identity is gone and the handling record becomes harder to follow. At the other end, the 25 kg drum lowers the handling per kilogram while tying up inventory for longer. The minimum follows the pack, not a volume target. ## Packs and formats Packs for porcine collagen peptides | Format | Pack size | Where it is used | Notes | Foil pouch | 1 kg | Trial, sampling, small batches | Foil barrier against light and moisture; close tightly after use | Fiber drum | 25 kg | Production | Liner inside the drum; lot code repeated on both | Granulated powder | On request | Better flow, less dust | Coarser granulation; separate specification and lead time The catalogue powder passes 80 mesh. Granulation changes the specification rather than the packing: it shifts the particle-size line and can also change the lead time. A dosage form that needs a coarser or freer-flowing powder should say so before the quotation is prepared. ## Lead time and dispatch Standard packs are dispatched within 1–7 days of order confirmation. The window covers picking, paperwork and handover to the carrier; transit, customs and the customer's own release sit outside it. A granulated or non-standard order adds time, which the quotation should show as a separate line. Ask for the dispatch date as well as the range. The pouch normally ships as a parcel and the drum on a pallet, and the Incoterm sets who arranges the freight and who clears customs. Lot documents should accompany the goods rather than follow them. ## What a quotation needs A quotation can be compared only when it carries six things: - Product and source. Porcine collagen peptides, type I, from porcine skin; CAS 9007-34-5. - Specification. The nitrogen factor and basis for protein, peptide content and SEC distribution, loss on drying, ash, particle size, metals and microbiology. - How much and in which pack. A 1 kg pouch, a 25 kg drum, or the granulated variant. - Destination and Incoterm. The country, the delivery point and the trade term. - Documents. COA, TDS, SDS, species and tissue declaration, and the religious-use statement. - Purpose and market. A supplement, a food, or another application, and the country where it will be sold. Species and destination are not optional details. A powder that fits one market may sit outside the file in another, and the paperwork is part of what is being offered. Commercial terms are not published here; they appear on the quotation. ## The sample has to be traceable The kilogram pouch doubles as the qualification sample. Check identity, protein, peptide distribution, moisture and microbiology before scaling up, and keep a retained portion from the same pack. Sample, COA and quotation should all carry the same lot code; without that link the material is only a demonstration. If the trial needs less than a kilogram, the material comes from a repack, not from the catalogue pouch. It leaves the bulk lot, gets a separate handling record, and should not be described as a 1 kg foil pack. Request the split in writing and file its lot code with the trial data. ## Terms to settle before the first order Put the commercial and quality terms on one page: Incoterm, pack, dispatch window, specification revision, a COA per lot, the retained sample, the retest period, and the route for a change. A quality agreement settled before the first production order is easier than the same discussion after a dispute. When a lot misses the agreed specification, the evidence is the retained sample and a joint re-test by the named method, rather than a picture of the drum. The agreement should name the referee laboratory, say who pays for it, and state the return route. Appearance alone is a weak basis for a return on either side. The catalogue is on the product page; the release lines are on the COA page; the source and label requirements are on the compliance page; the shipping documents are described on the quality page. ### 05 The regulatory file for porcine collagen peptides URL: https://nutrition.rainwoodbio.com/products/protein-collagen/porcine-collagen-peptides/compliance/ Reviewed: 2026-11-20 Porcine collagen peptides are a food ingredient of animal origin, so the regulatory file has to cover the species, the destination route, the contaminant limits, the label and the religious-use position. The catalogue specification and the COA describe the powder; the buyer's regulatory team confirms that the finished product may be placed on the destination market. The list below covers the documents and checks that belong in that folder. In one lineThe specification describes the powder; the destination file carries the source declaration, the limits, the label and the religious-use position. ## What the file contains A complete folder carries four things: the specification version for porcine collagen peptides, the lot certificate, the destination route and label rules, and the record of how changes to source, process and pack are controlled. The COA covers the lot, the TDS covers the specification, and the SDS covers handling. The destination route is a separate decision and is documented separately. The species is part of the file, not a footnote. CAS 9007-34-5 is the generic collagen number and does not name the animal, so the specification and the certificate have to say porcine skin in words. A generic “collagen peptides” description is not enough for a label review, a religious-use question or a customer's supplier approval. ## European Union For the EU, the finished product sits under the food-supplement framework (Directive 2002/46/EC), general food law (Regulation (EC) No 178/2002) and the food-information rules (Regulation (EU) No 1169/2011), with contaminant limits set by Commission Regulation (EU) 2023/915. Collagen hydrolysate has a history of use as a food ingredient; this page does not assert a novel-food or authorisation status for the material, and the buyer's regulatory team confirms the route for the member state where the product is sold. The ingredient list has to be accurate about what the consumer is buying; where the source is part of the product's identity, the species should be named. Pork is not on the Annex II list of 14 allergens, so the porcine source does not trigger a mandatory allergen emphasis in the way fish does, but the source still has to be accurate and the brand may choose to declare it for consumer transparency. As of this review, the current consolidated texts are the reference; the rules can change. ## United States In the United States, the question is how porcine collagen peptides qualify as a dietary ingredient and whether the finished product supports that positioning. The supplier states the basis for the ingredient, and the buyer verifies that it reaches the finished product and the claim. The Supplement Facts panel names the ingredient; “collagen peptides” alone is ambiguous where the source is part of the identity, so the panel should say porcine collagen peptides. A structure/function statement needs substantiation and the DSHEA disclaimer, and a disease claim is not open. Label review and claim review are separate from the certificate; no COA line approves a claim. ## Contaminants and limits The metal results have to be read against the finished product, not only against the drum. The table gives reference values to check; the current destination text and the finished-product composition set the final limit. Metal limits to confirm for the finished supplement | Metal | Reference level | Evidence to keep | Lead (Pb) | 3.0 mg/kg in the supplement | Result for the lot, method, and the calculation to the supplement weight | Cadmium (Cd) | 1.0 mg/kg in the supplement | Result for the lot, plus any category exception | Mercury (Hg) | 0.10 mg/kg in the supplement | Result for the lot and the method used | Arsenic (As) | Limit agreed with the market | The agreed figure and the method, both on the certificate If the collagen is one component of a blend, the result is calculated back to the weight of the supplement as sold, not to the collagen fraction alone. A lot that passes on the powder can still fail the calculation once the serving size and the other components are counted. ## Religious use Porcine collagen is not halal and not kosher. That is a property of the source, not a documentation gap: no certificate, filtration step or hydrolysis condition changes it. A pack that carries a halal or kosher mark cannot contain this material, and a supplier who offers a halal certificate for a porcine lot has described a different product. The label and the customer file should say porcine in words, and the ingredient list should do so where the source is material. Some destination markets restrict or require a declaration for porcine-derived material, and the importer's regulatory team confirms the requirement before the order. A “porcine-free” claim cannot be supported on a line that handles porcine material without a validated cleaning and segregation record. This is a label and market decision, not a specification defect. ## Label and claims No disease-related claim is open for this ingredient. A structure/function statement has to be substantiated and, in the US, carry the DSHEA disclaimer; in the EU, health claims are governed by Regulation (EC) No 1924/2006 and the authorised-claims register. “Porcine collagen peptides” is an ingredient name, not a health claim, and “type I” is a characterisation that needs a report behind it if it is printed. Mechanism language is not an authorisation, and a claim written for bovine or fish collagen does not transfer to the porcine source. The brand's reviewer tests the wording against the product, its form and the destination. This site sets out the specification and advances no health claim. ## Documents for the file Assemble the COA with the protein factor and basis, the peptide content and SEC distribution, loss on drying, ash, particle size, the metal panel and the micro count; the TDS and SDS; the species and tissue declaration, including porcine skin and the country of origin; the religious-use statement; the allergen statement; the GMO statement; and a statement on ruminant material, because customers who also handle bovine collagen often ask for one even though porcine is not a ruminant species. Add the change-control record for source, hydrolysis and pack. The identity page sets out the evidence for the species claim, and the COA page explains how each line is read. The EU regulatory notes hold the framework references. ## Checklist before the first order - Specification version, species and tissue are named. - COA, TDS, SDS, species declaration and religious-use statement are on file. - The metal results are calculated to the supplement as sold. - The label names porcine and has been reviewed for the destination. - The claim file is separate from the specification and has been reviewed. - Changes to source, hydrolysis and pack follow the change-control route. - The quotation, specification and certificate refer to the same version. The catalogue specification sits on the product page; the source comparison is on the porcine versus bovine page; the quality page describes the release file. ### 06 How we prove a porcine collagen lot is porcine collagen URL: https://nutrition.rainwoodbio.com/products/protein-collagen/porcine-collagen-peptides/identity/ Reviewed: 2026-11-20 The name porcine collagen peptides makes a species claim, and a lot has to earn it four times over. The paperwork must name porcine skin and type I collagen; hydroxyproline and the amino acid profile must show collagen; SEC must show a peptide curve rather than gelatin; and a species PCR or a documented pig chain must tie the powder to the animal. A Kjeldahl protein figure on its own identifies none of that. In one lineHydroxyproline proves collagen and only a species test proves porcine, so the identity file needs both the chemistry and the chain. ## The four identity layers Identity is not a single check. A sheet can print “porcine collagen peptides” and still leave the source unproven, because the paper trail, the amino acid chemistry, the peptide size and the animal itself each need their own evidence. Four layers of porcine collagen identity | Layer | Question | Evidence | What it cannot show | Document | Is the species and tissue named? | Name, CAS number, species and tissue on the COA and specification | Whether the powder matches the paper | Composition | Is the material collagen? | Hydroxyproline, with an amino acid profile dominated by glycine and proline | Which animal, which tissue | Size | Is it hydrolysed? | SEC fractions, chiefly below 3,000 Da | Animal; whether the collagen is intact | Species | Is it porcine? | PCR on the raw skin, or a validated powder method, backed by the documented pig chain | Which tissue; whether the tissue tested is the drum The layers stack. A pig-skin powder with the right hydroxyproline but an undeclared bovine blend passes the collagen tests and fails as a porcine product; a genuine porcine hydrolysate with a gelatin-like SEC curve passes the species question and fails as a process. ## The ratios that hold the sheet together Start with peptide against protein. The porcine specification sets protein at ≥90.0% and peptide at ≥80.0%, and the gap between the two is the moisture, ash, free amino acids and salts that the peptide method does not count. A peptide result above the protein result on the same basis is impossible, so one method, one basis or one calculation is wrong. The certificate should also say whether the peptide figure is a share of the powder or a share of the protein. The second ratio is hydroxyproline against protein. Hydroxyproline appears when proline in the collagen chain is hydroxylated, and a protein that did not come from collagen carries little of it. Read the result against the protein figure and the sheet has its simplest collagen check. It will not tell pig skin from cattle hide, however: porcine, bovine and fish type I all carry hydroxyproline in overlapping ranges, and no ratio separates them. The nitrogen figure adds a third ratio. Protein is nitrogen × 5.55, and the titration cannot distinguish collagen nitrogen from urea or ammonium nitrogen. A porcine lot that clears 90.0% protein and 80.0% peptide together is internally consistent; a lot that clears the protein line while the peptide sits at its 80.0% floor is the one to hold for an amino acid profile. ## What diffraction and infrared do not prove X-ray diffraction reads crystal packing, and a spray-dried porcine hydrolysate has none to read: the trace is a broad hump, and no reference pattern identifies pig skin. Infrared returns the amide bands that collagen shares with other proteins, and those bands say nothing about the animal. Neither instrument belongs in a porcine file as source evidence. Both tools earn their place on other raw materials. Diffraction separates polymorphs of mineral salts and crystalline amino acids, and infrared is a quick same-or-different check on an incoming powder. When a porcine lot is disputed, the useful panel is SEC for size, hydroxyproline and the amino acid profile for composition, and a species method plus the raw-material record behind the pig skin for the animal. ## The adulteration routes, and the test that finds each A porcine collagen powder has a defined amino acid signature, and a second protein or a diluent stirred into it usually leaves a mark on the sheet. The routes below are the ones a porcine specification and sampling plan should anticipate; each one moves a different number. Adulteration routes and the test that finds each | Route | What it changes | Test that finds it | Gelatin | Pushes mass above 3,000 Da; a cooled solution can set | SEC curve above the 3,000 Da cut; gel test | Other protein | Kjeldahl rises while hydroxyproline falls | Hydroxyproline-to-protein ratio; full amino acid profile | Nitrogen spiking | Nitrogen rises without peptide mass | Peptide against protein; total nitrogen against amino nitrogen | Bovine or fish collagen | Species changes, collagen chemistry does not | Species-specific PCR; documented species chain | Maltodextrin or other diluent | Protein and peptide down; ash or loss on drying shifts | Mass balance; SEC; ash and loss on drying No single line covers the table. Hydroxyproline, the amino acid profile, the SEC curve and a species method together give a porcine lot its defence, and the four tests are a small panel against the risk they cover. ## Writing the identity into the specification - “Porcine collagen peptides, type I, porcine skin; CAS 9007-34-5.” - “Protein ≥90.0% by Kjeldahl with N × 5.55; basis stated.” - “Peptide content ≥80.0% and ≥80% below 3,000 Da by SEC-HPLC; fractions reported.” - “Hydroxyproline reported as a supporting collagen marker, with its method, where the buyer's file requires it.” - “Loss on drying ≤7.0%; ash ≤5.0%; particle size ≥95% through 80 mesh.” - “Species proof: a signed porcine declaration, plus a species PCR on request.” - “Metals and microbiology as listed; no porcine-free claim.” The last line is the one that matters: the material is porcine, and a specification that also demands a porcine-free statement has described a different product. ## Five questions for the supplier - Is the tissue named as porcine skin on the COA, and is the species written in words rather than left to the CAS number? - Which factor — 5.55 or another — and which basis sit behind the 90.0% protein line, and is the 80.0% peptide measured on the powder or on the protein? - Will you release the full SEC curve with the column, calibration and fractions, not only the ≥80% below 3,000 Da headline? - Which evidence backs the pig claim — PCR on the raw skin, a signed porcine declaration, or both? - Does the drum's lot code agree with the COA and the retained sample, and is the religious-use position stated in the file? Those five answers make an identity file; a protein percentage on its own does not. The product page carries the catalogue specification; the COA page sets out each figure on the certificate; the grades page covers the particle size; the source comparison sets out the label positions; the methods section explains the techniques. ### 01 What the COA for vitamin K1 1% powder actually reports URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k1-powder/coa/ Reviewed: 2026-11-20 The certificate for a vitamin K1 1% powder lot reports appearance, HPLC and UV identification, assay by HPLC, loss on drying, heavy metals, microbiology and particle size. The assay is a concentration on a carrier, not a purity: 1.0–1.1% phytonadione means roughly 99% of the powder is carrier and moisture. The limits below are the catalog specification; the batch COA releases a particular pack. In one lineA 1% assay is a concentration, not a purity, so the certificate has to name the carrier, state the assay basis and show the HPLC identity that proves the vitamin is phytonadione. ## The certificate as a test report A row earns its place when a reader can check it: it names the measurement, the method and the limit the lot was released against. On a carrier powder the identity and assay rows carry more weight, because the appearance of a pale yellow powder says very little about the vitamin dispersed through it. Identity, assay, moisture and contaminants · vitamin K1 1% powder | Parameter | Method | Release limit | Appearance | Visual | Light yellow to yellow powder | Identification | HPLC retention and UV spectrum against a phytonadione reference | Conforms to the reference | Assay | HPLC with UV detection | 1.0–1.1% phytonadione | Loss on drying | Gravimetric on the blend | ≤5.0% | Heavy metals | ICP-MS, per element | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Absence tests and plate count | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; absent: E. coli, Salmonella | Particle size | Sieve analysis, 80-mesh screen | ≥95% through 80 mesh The sheet should also name the carrier and any antioxidant, with its level. Those lines are not in the catalog table, but they describe the other 99%; a certificate that omits them has identified the vitamin and left the carrier unknown. ## What 1.0–1.1% is a percentage of One kilogram of powder at 1.0% carries 10 g of phytonadione; at 1.1% it carries 11 g. That is why the figure is a content, not a purity test. The certificate should say whether the result is on the powder as received or on the dried basis. The catalog limit carries no basis note, so the basis has to be read from the certificate and agreed before release. The loss on drying line supplies the conversion. A lot that measures 1.00% as received at 4.0% moisture calculates to 1.04% dried; at 5.0% the same powder calculates to 1.05%. The window holds both, but a certificate that mixes the bases across lots is not describing a stable product. Ask for the basis in the assay row, not a footnote. The 0.1-point window is about 10% of the target, roughly ±5% around the midpoint; blending, sampling and moisture move inside it. A lot at 1.02% and one at 1.09% both pass yet differ by 7% in vitamin content per gram. The powder specification has no related-substances line. That is not an oversight to ignore: on a powder that is 99% carrier, a peak-area normalisation has little meaning. The cis isomer and menadione are better controlled on the oil before blending, or measured by a validated method against a phytonadione standard with a carrier blank. Ask which route the supplier uses. ## Release limit versus batch result A release limit defines what will be accepted; a batch result records what was found. The two belong in separate columns, with the method beside them, because a result column filled with the specification range says nothing about the lot. Entries that can be checked against the limit | Parameter | Release limit | Result column | Assay | 1.0–1.1% by HPLC | A measured percentage with its basis and method | Loss on drying | ≤5.0% | A measured percentage | Carrier | Identity agreed on the specification | The carrier name and its own specification | Heavy metals | Per element | A figure in mg/kg for each element | Microbiology | Counts and absence | The count plus the absence result for the lot | Particle size | ≥95% through 80 mesh | The percentage that passed the sieve “Conforms” is a conclusion, not evidence. For identification the evidence is a retention time and a UV spectrum against a phytonadione reference; for the carrier it is the carrier name and the supplier's own specification or certificate. A certificate that reports the assay to two decimals and leaves the carrier as a footnote has optimised the smaller line. The same test applies to the sieve result: 80 mesh is a specification, and the measured percentage through the sieve is the result. ## What moves between batches Four things move between lots. The carrier lot changes colour slightly and can change bulk density and flow. Blending decides content uniformity: a drum sampled top and bottom should give the same assay, and a spread is a mixing signal rather than an HPLC error. Drying and milling move loss on drying and particle size. Light exposure before sealing moves the colour and, at the margin, the isomer figure. Colour is the weakest line. Light yellow to yellow is a broad window, and a shift within it is not a rejection. A powder that looks darker or duller than the previous lot may reflect a longer hold, a warmer drying step or a different carrier while the assay still passes. Ask for the batch record and the carrier lot before rejecting on appearance alone. Content uniformity deserves its own sample: a 1% powder can pass a 1 g assay while a 10 mg scoop is not representative. ## When to order an outside test An outside laboratory earns its fee when a source is new, when a shipment enters a regulated market for the first time, when potency is disputed or when the certificate does not establish the carrier. The panel is HPLC with a diode-array detector and a phytonadione standard, assay with its basis, loss on drying, ICP-MS metals, microbiology and a sieve analysis. Add carrier identity by FTIR against a reference, the antioxidant identity and level if one is declared, and cis isomer or menadione if the chromatogram shows peaks the certificate does not explain. For a drum, sample more than one position and report each result; a single composite hides the segregation that matters at the weighing station. Every screen needs its detection limit beside the result; a “not detected” line with no figure describes the method. Tested and retained samples should be the same, and the report should carry the lot code from the pack. ## What to compare between suppliers Seven lines repay a side-by-side read: form and CAS number; declared content and basis; carrier identity and statements; particle size; loss on drying; metals and microbiology; pack size and lot code. Two offers that agree on 1% but differ on carrier or basis are not the same powder. The second layer is traceability: who blended the lot, which carrier lot was used and whether an antioxidant was added. The catalog numbers are on the vitamin K1 1% powder product page. The grade levers are compared on the grades page; the mass arithmetic is on the oil versus powder page; the parent oil is on the vitamin K1 page; the separation behind the assay is described in the analytical methods library; the release workflow is on the quality page. ### 02 Vitamin K1 powder grades: potency, carrier and particle form URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k1-powder/grades/ Reviewed: 2026-11-20 The catalog vitamin K1 powder is a 1% grade: phytonadione on a carrier at 1.0–1.1% by HPLC, milled to 80 mesh. Potency, carrier and particle form are three separate decisions; the catalog fixes potency at 1%, while the carrier and particle form are named on the lot. A granulated finish or the neat oil changes the mass per dose, the flow and the label, so the grade should follow the dosage form. In one lineA powder grade is defined by three things — the declared potency, the carrier and the particle form; the 1% catalog grade fixes the potency, and the other two belong on the specification. ## Why a carrier grade exists Phytonadione is a viscous oil at room temperature. The dose is measured in micrograms, and a 100 µg dose is about 0.1 mg of the oil, a quantity no capsule line can weigh. A carrier grade solves two problems at once: it turns the oil into a solid that can be blended and filled, and it dilutes the vitamin to a concentration that ordinary weighing equipment can handle. At 1%, a 100 µg dose is 10 mg of powder — still small, but within reach of a laboratory balance and a premix step. That is why the 1% grade works as a premix, not a stand-alone fill. In a 500 mg capsule blend it is 10 mg, about 2% of the fill; the rest is other actives and excipients. The carrier is what lets the vitamin be distributed evenly and weighed without a microbalance. The oil remains the parent material. A buyer who needs an oil fill, an oil blend or an emulsion buys the oil; a buyer who needs a solid buys the carrier grade. Neither is a substitute for the other, and the certificate for each describes a different product. ## The milled powder, the granulated finish and the oil Powder grade, granulated finish and the neat oil · vitamin K1 | Property | 1% powder, 80 mesh (catalog) | 1% granulated (on request) | Neat oil (sibling product) | Form | Light yellow, free-flowing powder | Coarser granule from the same blend | Clear yellow to amber viscous oil | Declared content | 1.0–1.1% phytonadione by HPLC | 1.0–1.1%, same blend, different finish | 97.0–103.0% phytonadione by HPLC | Mass for a 100 µg dose | About 10 mg | About 10 mg | About 0.1 mg | Typical use | Capsule and tablet blends, stick packs | Blends that need flow and low dust | Softgels, oil blends, emulsions | Label | Vitamin K (as phytonadione) plus carrier | Same, with the granulated carrier profile | Vitamin K (as phytonadione); carrier oil if blended The table makes the point that potency and particle form are different levers. The granulated finish is the same 1% blend with a coarser particle; it changes flow, dust and segregation, not the vitamin content. The oil is a different product with a different specification and a different certificate. A different declared content would be a new specification, not a variant of this page; the carrier, the uniformity and the label would have to be rebuilt around it. ## Particle size, flow and dispersion The catalog powder is ≥95% through 80 mesh. That figure is a finishing specification: it says the mill and the sieve were set to give a fine, free-flowing powder, not that the vitamin is evenly distributed at every scale. A finer powder disperses faster and dusts more; a coarser granule flows better and traps less air. Bulk density and flow are not on the catalog table, yet they decide whether a blend runs. Ask for both if the powder feeds a dosator or a sachet line. Granulation answers dust or segregation and does not change the declared content. Water dispersibility is a property of the powder, not of the vitamin. The catalog describes the powder as dispersible in water as supplied, while phytonadione itself is fat-soluble. A dispersion is not a solution: the vitamin stays in fine droplets or on carrier particles, and a clear drink needs an emulsion rather than a stir. ## Dose arithmetic and the blend The arithmetic is a division by the declared content. At 1.0%, a 75 µg dose is 7.5 mg of powder, a 100 µg dose is 10 mg and a 1 mg dose is 100 mg. At 1.1% the same doses are 6.8 mg, 9.1 mg and 90.9 mg. Those differences are small against a 500 mg capsule, but they matter when the powder is a minor premix and the blend is built to a tight label claim. In a 500 mg capsule, 10 mg of the 1% powder delivers 100 µg and occupies 2% of the fill. At a 1 mg claim the same capsule would need 100 mg, or 20% of the fill, and the carrier starts to compete with the other ingredients for space. That is the point at which a more concentrated grade or an oil fill becomes the better dosage-form decision. Weigh the powder, not the vitamin, and calculate from the declared content printed on the certificate. A formula built on 1.0% that receives a 1.08% lot will over-deliver by about 8%; built on 1.08% and filled with a 1.00% lot, it under-delivers by about 7%. The error sits in the premix, not in the capsule fill. ## What to write into the specification - “Vitamin K1 (phytonadione, phylloquinone), CAS 84-80-0, C31H46O2, on a carrier.” - “Declared content 1.0–1.1% by HPLC; state whether the result is as received or dried.” - “Carrier identity and its specification; antioxidant identity and level if one is used.” - “Loss on drying ≤5.0%; particle size ≥95% through 80 mesh, or the granulated profile.” - “Identification by HPLC retention and UV spectrum against a phytonadione reference.” - “Heavy metals and microbiology as listed; pack 1 kg foil pouch or 25 kg fiber drum.” - “Label name: vitamin K (as phytonadione), with the carrier in the ingredient list.” We supply the 1% milled powder; a granulated finish is a separate packing option, and the oil is a separate product. ## When the 1% powder is the wrong grade The 1% powder is a poor fit when the dose is small and the capsule is single-ingredient. A 100 µg dose needs 10 mg of powder, which is below a practical capsule fill; the oil or a more concentrated grade suits that format better. It is also the wrong choice for a clear beverage, because the vitamin is not water-soluble and the powder gives a dispersion, not a solution. An emulsion is a development project, not a scoop of powder. Where the plant has oil handling, an oil fill carries no carrier and no carrier line on the label. Where the plant has only powder handling, the carrier grade is the practical route, and granulation is the lever for flow. The catalog specification sits on the vitamin K1 1% powder product page. The oil is described on the vitamin K1 product page; the carrier arithmetic is set out on the oil versus powder page; the assay method is described in the analytical methods library; the release file is on the quality page. ### 02.1 Vitamin K1 oil vs 1% powder: mass, carrier and the label URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k1-powder/grades/vitamin-k1-oil-vs-powder/ Reviewed: 2026-11-20 The oil is phytonadione at 97.0–103.0% by HPLC; the 1% powder is phytonadione dispersed on a carrier at 1.0–1.1%. The same 100 µg dose weighs about 0.1 mg as oil and about 10 mg as powder. That hundred-fold difference in mass is the whole comparison: it decides the dosage form, the process, the overage and what the label has to declare. In one lineThe oil is the molecule; the 1% powder is about 1% molecule with the rest carrier and moisture, so the same 100 µg dose weighs roughly a hundred times more. ## The same dose, two masses The same vitamin K1 dose in oil and in 1% powder | Dose | Neat oil at about 100% | 1% powder | 75 µg (EU reference value) | About 0.075 mg | About 7.5 mg | 100 µg | About 0.1 mg | About 10 mg | 1 mg | About 1 mg | About 100 mg The oil figure is the vitamin itself; the powder figure includes the carrier. On a softgel line the oil is diluted into a carrier oil before the fill, because 0.1 mg cannot be weighed as a single dose; that dilution is a separate blend with its own specification. On a capsule or tablet line the powder is weighed as a premix: 10 mg of the 1% powder is about 2% of a 500 mg capsule, and the rest of the fill is other actives and excipients. At a 1 mg claim the powder is 100 mg, or 20% of the same capsule, and the carrier starts to take up space the formula may not have. The mass, not the potency, is what limits the format. ## The carrier is part of the product The oil is the molecule and nothing else; the powder is the molecule plus a matrix. The catalog record fixes the declared content at 1.0–1.1% and names the form as phytonadione on a carrier, but the carrier is not a formality. It is chosen by the manufacturer and written into the specification and the technical data sheet. The common families are a carbohydrate matrix such as maltodextrin, a gum such as acacia, and a mineral carrier such as silicon dioxide or calcium phosphate. Some grades add an antioxidant. Each choice changes the flow, the dispersibility, the moisture sensitivity and the label: a cereal-derived carrier can bring an allergen or gluten statement, a maize-derived one can bring a GMO statement, and an antioxidant is an ingredient whose declaration and level need checking. A carrier change is a specification change even when the assay stays at 1.0%. It needs a new technical data sheet, a label check and a stability check. The oil has no carrier line, which is one reason an oil fill is simpler on paper. ## Overage costs mass on a 1% powder An overage is a finished-product decision: the brand adds vitamin above the label claim to cover loss over shelf life. On the oil, a 10% overage adds 0.01 mg to a 100 µg dose — a quantity that disappears in the fill. On the 1% powder, the same overage adds 1 mg of powder at 100 µg and 10 mg at 1 mg, and that mass has to fit the capsule or the sachet. Overage also changes the carrier intake and the label arithmetic: the declared vitamin goes up, the carrier goes up with it, and the ingredient list does not change but the amount per serving does. The 1.0–1.1% assay window is not an overage; it is the release range of the ingredient, and the two should not be conflated. A formulator who needs an overage should check that the powder's mass still fits the dosage form before writing it into the label. The overage does not repair a pack that lets light or moisture in. ## Two forms, two processes The oil suits softgels, oil blends and emulsions. It needs warmed lines, a nitrogen blanket and an amber or opaque pack, and it is measured by mass into an oil phase. The powder suits tablets, capsule blends, stick packs and dry mixes. It needs a blending step, dust control and a content-uniformity check, and it is measured as a premix into a powder blend. An aqueous drink is the wrong place for the oil unless it is emulsified; the powder disperses in water but does not dissolve, so a clear drink is still an emulsion project. Neither form is a drop-in for the other: the process, the equipment and the quality checks change with the form. The powder also changes the failure mode. An oil lot fails on light, oxygen and the bottle seal; a powder lot can fail on moisture, caking and segregation, and a segregated blend can pass the composite assay while the capsule does not. The quality plan follows the form. ## What the label has to declare Both forms declare vitamin K as phytonadione, for example “Vitamin K (as phytonadione)”, and both calculate the percentage against the same reference value: 75 µg in the EU and 120 µg in the US, as of this review. The difference is what else appears on the label. The powder adds the carrier to the ingredient list, and the carrier may bring an allergen, gluten or GMO statement. The oil adds no carrier unless it has been blended into a carrier oil, in which case that oil is declared too. A label written for the oil is not correct for the powder, and the reverse is also true: the ingredient list, the mass per serving and the % NRV or % DV all follow the form. The label name is not a marketing choice. A panel that says only “vitamin K” has not identified the form, and a panel that says “phytonadione” has not disclosed the carrier in the powder. Both lines are needed, and they have to match the certificate and the specification revision. ## When to choose which Choose the oil when the dosage form is a softgel, an oil blend or an emulsion, and when the plant has the handling for it. Choose the powder when the line is dry, when the dose is large enough for the powder mass to fit, or when the formula is a blend in which 10–100 mg of powder is a minor component. Choose neither by habit. A 100 µg single-ingredient capsule is a poor fit for the 1% powder, because 10 mg is below a practical fill; a 1 mg tablet blend can use the powder comfortably. If the form changes, the specification, the label and the stability file change with it. The powder's catalog specification is on the vitamin K1 1% powder page, and the oil's is on the vitamin K1 page. The grades page compares the milled and granulated finishes; the COA page shows how the powder is released; the methods library describes the HPLC assay; the quality page covers the release file. ### 03 Vitamin K1 1% powder: light, moisture and the carrier surface URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k1-powder/stability/ Reviewed: 2026-11-20 A vitamin K1 1% powder is more exposed than the neat oil. The vitamin sits as a thin film on a large carrier surface, so light, oxygen and moisture reach it across a much greater area, and the carrier itself can take up water, cake and lose flow. A sealed, light-resistant pack at a controlled humidity is the storage condition; the shelf life is assigned from data for that pack. In one lineThe carrier spreads the vitamin over a large surface, so light, oxygen and moisture reach it faster than they reach the neat oil; the sealed foil pouch is what buys the shelf life. ## The powder: moisture, light and caking The catalog limit is loss on drying ≤5.0%, and that figure is a release gate rather than a storage allowance. Once the pouch is open, the powder equilibrates with the room: moisture climbs, the as-is assay slips and the powder can cake. A 1% powder is 99% carrier and moisture by mass, and many carriers are hygroscopic, so the curve is steeper than it would be for the oil. Light is the second driver. Phytonadione is photolabile, and a thin film on a carrier presents more surface to the light than a bottle of oil. Keep the powder in its original foil pouch or in an opaque container that closes properly. A clear jar on a bench is an exposure, not a storage choice. Heat raises the rate of both. Ambient warehouse temperatures are usually acceptable for the sealed pack, but a hot loading bay or a car boot is not. Let a cold pack reach room temperature before opening; otherwise water condenses on the powder and drives the local moisture up. ## The dispersion, not a solution The powder disperses in water; it does not dissolve. Phytonadione is fat-soluble, and the carrier breaks into fine particles that carry the vitamin into suspension. A drink made from the powder is a dispersion, and a dispersion is less stable than a dry blend: light, oxygen and heat act on the droplets, and the suspension can cream or settle before the consumer drinks it. If the finished product is a stick pack or a drink mix, the consumer adds water at the point of use, which avoids a liquid hold in the factory. If a ready-to-drink liquid is unavoidable, the vitamin needs an emulsion, and the emulsion has its own stability file: pH, oxygen, heat load and the pack all change the rate. Do not read a bulk-powder stability result across to a beverage. The matrix and the process each change the answer, and the drink has to be tested as a drink. ## What drives degradation Factors that move vitamin K1 1% powder during storage | Factor | What it does | Control | Light | Photodegradation; the colour fades and the assay drifts | Foil or opaque pack; dark store | Moisture | Raises loss on drying; caking; lower as-is assay | Sealed pouch; desiccant; dry store | Oxygen | Oxidation of the vitamin on the carrier surface | Low headspace; sealed pack; antioxidant if specified | Heat | Speeds up light and moisture damage | Controlled store; cool process | Carrier | A hygroscopic carrier takes up water and moves flow | Carrier fixed on the specification | Segregation | Uneven vitamin distribution inside the pack | Content-uniformity test; granulation The factors interact: a warm, bright, humid store does more damage than any one of them alone, and an open pouch in a kitchen combines all three. The useful question is not whether the powder is stable in general, but whether it is stable in this pack, at this condition, for this period. ## A stability protocol for the ingredient The protocol should name the pack, the condition, the time points and the tests before the first sample goes in. The warehouse is covered by 25 °C/60% relative humidity and 30 °C/65%; 40 °C/75% stresses the pack, and a light-exposure arm catches the failure a dark incubator misses. Test assay with its basis, loss on drying, appearance, HPLC/UV identity and microbiology at each point. Add a sieve or flow check if caking is the concern. For a blend, test the blend as well as the powder, because the excipients can move moisture into the vitamin and the compression step adds heat and pressure. Ask for the individual results rather than a pass statement, with the pack and the lot family identified. A drum and a pouch differ in headspace, surface-to-volume ratio and how often they are opened, so the data has to belong to the pack you buy. ## The finished formula changes the answer A capsule or tablet blend starts dry, but the excipients and the shell can still move moisture. The 1% powder is usually a minor component of that blend, so the vitamin's share of the water is small; the risk is local, at the particle, and it shows as a loss of assay or a darkening of the powder after storage. A stick pack fails at the seal. A pinhole in the foil is enough to let moisture in, and the strip should be inspected as well as the powder. A tablet adds compression heat and pressure; neither is severe for this vitamin at a 2% inclusion, but the stability file should test the tablet, not only the powder. An overage, if the finished-product stability file calls for one, does not repair a pack that lets moisture in. It buys time on the label; it does not change the failure mode. ## How the shelf life is set There is no single shelf-life figure for the 1% powder: the pack and the storage condition set it. The retest period assigned to the product belongs on the specification, backed by the stability file for that pack. A figure with no pack, no condition and no test panel behind it is a claim rather than a shelf life. When the retest period ends, the retained sample is re-assayed before any extension. An extension by assumption, or one carried across to a repacked container, is not supported. Standard packs are listed on the product hub; the release tests are on the COA page; pack sizes and lead time are on the MOQ page; the parent oil is on the vitamin K1 page; the assay is explained in the methods library; the release workflow is on the quality page. ### 04 Vitamin K1 1% powder: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k1-powder/moq/ Reviewed: 2026-11-20 The MOQ for vitamin K1 1% powder is 1 kg, supplied as a 1 kg foil pouch; the bulk pack is a 25 kg fiber drum, and the standard pack ships in 1–7 days. One kilogram of a 1% powder carries about 10 g of phytonadione, so the smallest order is mostly carrier; a firm quotation needs the declared content and its basis, the carrier, the particle form, the quantity and pack, the destination and the documents. In one lineOne kilogram is the smallest pack that keeps a lot identity, and at 1% it carries only about 10 g of phytonadione; the rest is carrier that still has to be shipped, stored and declared. ## Why the minimum is 1 kg A 1 kg pack covers a bench trial, a retained sample and an independent assay, and it ships as a parcel rather than on a pallet. It is also the smallest unit that can carry a lot code through the chain, which matters more for a dilution than for a neat material: the vitamin is 1% of the mass, so a sampling error at the pouch becomes a large error in the vitamin. At 1.0–1.1%, a 1 kg pouch holds 10–11 g of phytonadione. A 25 kg drum holds 250–275 g, and about 24.75 kg of carrier. The drum lowers the handling per kilogram of vitamin, but it commits inventory and a longer storage period for a moisture-sensitive powder. Below 1 kg, the material is split from a larger lot and packed again. Handling increases, the original pack identity disappears and the retained sample becomes harder to tie to the lot. The 1 kg pouch is the commercial unit; anything smaller is a repack. ## Packs and formats Standard vitamin K1 1% powder packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trials and small batches | Foil barrier; close the pouch after opening | Fiber drum | 25 kg | Production runs | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Coarser particle; same declared content The catalog form is the 80 mesh powder: ≥95% through 80 mesh. Granulation is a separate packing option with its own particle profile; it is not a cosmetic choice, because it changes the flow, the dust and the way the powder blends. Say so before the quotation if the line needs a granule. ## Lead time and dispatch The standard pack is offered at 1–7 days from order confirmation. The window covers picking, document preparation and dispatch, not transit, customs clearance or the customer's own release. A granulated finish or a non-standard pack takes longer, and the quotation should say so. Ask for the dispatch date, not only the range. A 1 kg pouch usually moves as a parcel; the 25 kg drum travels on a pallet, and the Incoterm decides who arranges freight and who clears entry. The COA and the technical data sheet should travel with the pack. ## What a quotation needs - Product and form. Vitamin K1 1% powder, phytonadione on a carrier, CAS 84-80-0. - Declared content and basis. 1.0–1.1% by HPLC, stated as received or on the dried basis. - Carrier and particle form. Carrier identity, any antioxidant, and 80 mesh or granulated. - Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated variant. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents and intended use. COA, specification, SDS, carrier statements, and the market. A quotation that names the potency but not the carrier is incomplete: the carrier is 99% of what will be shipped, and it brings its own documentation and label consequences. The same powder can suit one destination and fail the carrier check for another. Commercial terms are not published here; they appear on the quotation. ## A sample that carries a lot code The 1 kg pouch is the pack a new buyer qualifies. Test the assay in duplicate, loss on drying, the sieve result, the microbiology and the carrier identity before scaling, and keep a retained sample from the same pouch. Make sure one lot code appears on the sample, the COA and the quotation. Sample more than one position in the pouch if the powder will be used at a low inclusion. A 1% powder can pass a composite assay and still segregate in transit; a top-and-bottom check is a cheap way to see whether the blend is uniform. If the sample cannot be traced back to a lot, it is a demonstration rather than a qualification. A trial that needs less than a kilogram is split from a larger lot; it is a repack, not the catalog pouch, and it carries its own handling record rather than the 1 kg foil pack's identity. ## Terms to settle before the first order Settle the commercial and quality terms on one page: Incoterm, pack, dispatch window, specification revision, a COA for each lot, the retained sample, the retest period and the route for a change. A carrier change counts as a specification change, not a purchasing detail, and needs written approval before the next lot is blended. When a lot misses the agreed specification, the dispute goes to the retained sample and a joint re-test against the named method. The agreement should name who pays for the referee laboratory and which laboratory both sides accept. Colour alone is a weak basis for a return, because the appearance window is broad. The product hub carries the catalog specification; the COA page lists the release tests; the compliance page covers the market files; the vitamin K1 page covers the parent oil; the methods library describes the assay; the quality page carries the release file; the MOQ glossary entry defines the term; the logistics page covers shipping and documents. ### 05 The regulatory file for vitamin K1 1% powder URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k1-powder/compliance/ Reviewed: 2026-11-20 Vitamin K1 1% powder is phytonadione, CAS 84-80-0, dispersed on a carrier. Four things shape the file: the form, the carrier, the destination and the finished-product route. Vitamin K is an established vitamin, but a 1% powder puts a second ingredient into the product, and the carrier has its own permissions, statements and label entry. The buyer's regulatory team confirms the route for each market; this page lists the framework and the evidence to hold. In one lineVitamin K is an established vitamin, but a 1% powder puts a second ingredient on the label: the file has to cover the carrier as well as the phytonadione. ## What the file contains The file answers four questions: what material and revision is being bought; which lot is released and on what certificate; which limits and label rules apply to the finished product; and what is re-checked when the source, process or pack changes. The certificate covers the lot, the technical data sheet the specification and the safety data sheet the handling; the destination route stays with the operator. The powder adds a fifth document set: the carrier. Its identity, food-use status for the category, allergen and GMO statements and specification belong in the file; a certificate that names only phytonadione has left the larger ingredient undocumented. The isomer statement belongs here too: phytonadione is made by synthesis, and the cis isomer and epoxide are part of the related-substances picture. Ask for the figures on the oil before blending, or a validated method on the powder. ## European Union For food supplements, Directive 2002/46/EC provides the positive lists: Annex I names the vitamins and minerals, and Annex II the permitted forms. The vitamin K entry is form-specific, and phylloquinone is the name to check against the current consolidated text. Labelling follows Regulation (EU) No 1169/2011, including the amount per portion and the percentage of the nutrient reference value; the reference value for vitamin K is 75 µg a day, as of this review. The carrier is a food ingredient in its own right and has to be acceptable for the category and declared in the ingredient list. National maximum levels and notification procedures for vitamins are not harmonised, so the member state matters as much as the union. Contaminants fall under Regulation (EU) 2023/915, and the general food law duties sit with the operator placing the product on the market. ## United States For a supplement, the file turns on the dietary ingredient and the Supplement Facts panel. Vitamin K is declared under that name with its form in brackets, for example “Vitamin K (as phytonadione)”, and the percentage is calculated against a Daily Value of 120 µg, as of this review. The supplier should name the basis on which it regards the ingredient as a dietary ingredient; the buyer confirms that the basis covers the finished product and the claim. The carrier is declared in the ingredient list and has to be suitable for the intended use; a carrier that is acceptable in a supplement may not be acceptable in a conventional food. Adding the vitamin to a conventional food is a different exercise with a different label, and the intended use should be settled before documents are collected. ## Contaminants and limits Contaminant limits apply to the finished product. The powder is used in small amounts per serving, but it is about a hundred times the mass of the oil at the same vitamin dose, so the carrier enters the calculation. The table is a starting point; the destination text and the daily dose settle the final limit. Contaminant limits to check against the finished product | Parameter | Typical supplement reference | Evidence the file should hold | Lead (Pb) | 3.0 mg/kg in the supplement | The lot figure, the method, the limit and the dose calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | The lot figure plus any category exception | Mercury (Hg) | 0.10 mg/kg in the supplement | The lot figure and the method | Arsenic (As) | Customer or market limit | The agreed limit, the method and the lot figure One calculation shows the scale. A 10 mg portion of the 1% powder delivers 100 µg of vitamin K; at the 3.0 mg/kg lead limit the powder would contribute about 0.03 µg of lead. The same dose from the oil uses about 0.1 mg and would contribute about 0.0003 µg. Both figures are small, but the powder's contribution is a hundred times larger, and the carrier's own metals result belongs in the sum. A 100 mg portion, which a 1 mg claim needs, contributes 0.3 µg. The absolute numbers are still low against a supplement's daily intake, but the arithmetic shows why a carrier certificate is part of the contaminant file. ## Label and claims Claims are governed by Regulation (EC) No 1924/2006 and the authorised list in Regulation (EU) No 432/2012. Vitamin K has entries in that list, each conditional on the amount in the product; for a “source of” claim the threshold is 15% of 75 µg, or 11.25 µg in the daily portion, as of this review. The wording is fixed, and the claim is reviewed apart from the certificate. In the US, “good source” needs 10% of the Daily Value and “high” needs 20%; against 120 µg those thresholds are 12 µg and 24 µg. A 1% powder can meet either threshold with a small mass of powder, so the claim is easy to trigger and the label arithmetic should be checked. No disease-related claim is open in either market. The carrier does not carry a claim, and a “natural” statement about the vitamin needs evidence, because phytonadione is made by synthesis. The brand's reviewer signs off the final words. ## Documents for the file - Specification naming phytonadione, the CAS number and the declared content with its basis. - Carrier identity, specification and food-use statement for the destination category. - Lot COA with assay, loss on drying, metals, microbiology, particle size and the carrier line. - Technical data sheet and safety data sheet. - Allergen, GMO, irradiation and animal-derived input statements for the vitamin and the carrier. - Residual-solvent and isomer statements for the phytonadione. - Nutrition worksheet with vitamin K per portion and the % NRV or % DV. ## Checklist before the first order - Phytonadione is named, with the declared content and its basis. - The carrier is named and acceptable for the destination and the category. - The form is checked against the current permitted list for the destination. - The contaminant figures are converted to the finished-product dose. - The label declares the vitamin form and the carrier. - The claim wording and the % NRV or % DV are checked. - Source, carrier, process and pack sit under change control. The product hub carries the catalog specification, the COA page explains the lot certificate and the identity page covers the analytical evidence. The vitamin K1 page covers the parent oil, the methods library describes the HPLC assay, the quality page describes the release file, and the EU regulatory notes carry the framework references. ### 06 How to prove a vitamin K1 1% powder is what it says URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k1-powder/identity/ Reviewed: 2026-11-20 A vitamin K1 1% powder has two identities to prove. The first is the vitamin: HPLC retention and the UV spectrum against a phytonadione reference, with an assay inside 1.0–1.1%. The second is the carrier and the declared content: what the other 99% of the powder is, and whether the vitamin is evenly distributed through it. An assay alone proves neither the carrier nor the uniformity. In one lineOn a 1% powder, identity has two halves: HPLC and UV show the phytonadione, and the carrier plus the declared content show what the other 99% is. ## The four identity layers A certificate can name the right vitamin and still fail to describe the powder. Each layer below answers a different question, and each needs its own evidence. A supplier who answers only the first has described the label, not the material. Four layers of vitamin K1 1% powder identity | Layer | Question | Test | What it proves | Paperwork | Does the document name the form? | Name, CAS number and declared content | That the papers agree | Chromatography | Is the peak phytonadione? | HPLC retention plus the UV/DAD spectrum | The molecule | Content | Is the declared potency real? | Assay against a phytonadione standard | The concentration on the carrier | Carrier | What is the matrix? | Carrier identity by FTIR or the supplier's specification | The other 99% and its label consequences The fourth layer is the one a 1% powder adds to the usual identity file, and it is the one most often left out. The vitamin can be genuine and the lot still misdescribed if the carrier is not what the label says. ## The mass balance and the isomer ratio The ratio that matters here is the mass balance. A 1.00% assay leaves 99.00% for carrier, moisture and related substances; a 5.0% loss on drying takes 5 points of that, and the carrier accounts for the rest. If the numbers do not close, either the assay basis is wrong or an unlisted component is present. The trans and cis ratio belongs to the phytonadione, not to the carrier. The synthesis produces both geometries, and the purification decides how much cis survives; a cis-rich oil carries through to the powder. Ask for the isomer figures on the oil lot that was blended, because a peak-area normalisation on a 99% carrier powder is not a reliable isomer test. The carrier ratio is a label question as well. A powder that is 99% carrier is, in effect, a carrier product with a vitamin added; the carrier's identity, its source and its statements decide the allergen and GMO lines on the finished label. ## What X-ray diffraction can and cannot show X-ray diffraction on this powder describes the carrier, not the vitamin. A crystalline carrier gives sharp reflections; an amorphous carrier gives a broad halo; the phytonadione, dispersed at 1%, is too dilute and too disordered to contribute a useful pattern. A certificate that reports “XRD conforms” for the powder has told the reader about the matrix, not about the potency. The technique has a real use in a supplier comparison: it can show that two lots use the same carrier, or that a carrier has been changed. It is not a release test for the vitamin and it does not measure content. Ask for the reference pattern and the detection limit before accepting a match. ## What adulteration looks like What a vitamin K1 1% powder can be substituted with, and how it shows | Substitution | Effect | Signal | Test | Under-potency | More carrier, less vitamin | Assay below 1.0%; mass balance short | HPLC assay against a standard | Menadione spike | A cheaper naphthoquinone with no phytyl chain | Extra peak; different UV fine structure | HPLC/UV, mass spectrometry | K2 substitution | A menaquinone with a different chain | Different retention and molecular weight | HPLC/UV, mass spectrometry | Dye | A yellow dye copies the colour | The colour matches but the spectrum does not | UV spectrum, HPLC | Segregation | Uneven vitamin across the pack | Top and bottom assays differ | Multi-position sampling | Carrier swap | Same vitamin, different matrix | Allergen, GMO or label mismatch | Carrier FTIR, supplier specification Colour is the weakest signal on a pale yellow powder; a dye or a different carrier can reproduce it. The stronger signals are the assay against a standard, the mass balance, the multi-position sample and the carrier identity. A certificate that reports appearance and assay but leaves the carrier unnamed has not tested the substitution a 1% powder is most exposed to. ## How to write identity into the specification - “Vitamin K1 (phytonadione, phylloquinone), CAS 84-80-0, C31H46O2, on a carrier.” - “Declared content 1.0–1.1% by HPLC against a phytonadione standard; basis stated.” - “Carrier identity, specification and food-use statement; antioxidant identity and level if used.” - “Loss on drying ≤5.0%; particle size ≥95% through 80 mesh, or the granulated profile.” - “Identification by HPLC retention plus the UV spectrum against a phytonadione reference.” - “Heavy metals and microbiology as listed; no menadione or other naphthoquinone above the agreed limit.” - “Destination market, carrier and label name confirmed before the order.” ## Five questions for the supplier - Which carrier is on this lot, and what is its specification? - Can you provide the chromatogram and the UV spectrum, not only the assay percentage? - Is the assay on the powder as received or on the dried basis? - How is content uniformity verified across the pouch or the drum? - If the lot is disputed, will you test the retained sample jointly with us? Those five answers, taken together, are the identity file; a single assay figure is not. The product hub holds the catalog specification; the COA page places each figure on the certificate; the grades page compares the powder with the oil; the vitamin K1 page covers the parent oil; the methods library explains the separation; the quality page covers the release file. ### 01 What the COA for methylcobalamin actually contains URL: https://nutrition.rainwoodbio.com/products/vitamins/methylcobalamin/coa/ Reviewed: 2026-11-20 A methylcobalamin certificate covers appearance, identity by HPLC with a UV-Vis spectrum, assay, loss on drying, heavy metals, microbiology and particle size. Read it as a set of measurements rather than a verdict: every parameter needs its method, its limit and the figure the laboratory actually obtained. The table below gives the catalog specification; the lot certificate is where the results sit against it. In one lineThe assay is only meaningful with its basis: a methylcobalamin figure beside its loss on drying, and an HPLC/UV identity that distinguishes the methyl form from the other cobalamins. ## The certificate as a test report A certificate is auditable when every line answers three questions: what was measured, by which method, and against which limit. A row that says only “conforms” asks the reader to trust a conclusion without the evidence behind it. For methylcobalamin the identity lines carry more weight than usual, because a cyanocobalamin or hydroxocobalamin lot can produce a plausible assay if the number is expressed simply as vitamin B12. The form named on the certificate and the standard used for the assay are part of the result, not of the cover page. A method run against a cyanocobalamin standard with an assumed response factor describes a different molecule. Release tests for methylcobalamin · catalog specification | Parameter | Method | Release limit | Appearance | Visual | Dark red crystalline powder | Identification | HPLC retention and UV-Vis spectrum | Conforms to the methylcobalamin reference | Assay | HPLC with UV detection | 98.0–101.0% | Loss on drying | Gravimetric | ≤10.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh ## Assay basis, water and the identity standard The catalog line is 98.0–101.0% by HPLC and it does not carry a basis. Methylcobalamin holds water, and the loss-on-drying gate of ≤10.0% is wide enough that the basis can move the result beyond either end of that range. A powder measuring 94.0% as-is with 7.0% water calculates to 101.1% on the dried basis; the same analysis passes or fails depending on which basis is printed. The agreed specification should name the basis, and the certificate should repeat it in the assay row with the moisture result beside it. The arithmetic matters at this dose. A 1,000 µg label claim is weighed as a milligram of powder, so the as-is assay is the figure that sizes the fill and the overage. An anhydrous figure is the right basis for a release limit because it separates the molecule from the water, but it is not the number to use at the balance. Identity should be run against a methylcobalamin reference standard. The UV-Vis spectrum has maxima near 267, 342 and 522 nm, and the absorbance ratios at those maxima are fixed by the method; a retention time alone, without the spectrum, does not show which ligand sits on the cobalt. ## Release limit versus batch result A specification limit and a lot result answer different questions, and the certificate should keep them apart. The limit says what the lot had to meet; the result says what the laboratory found on the sample. Printing the range in both columns produces a document that looks complete and reports nothing. The result column should hold a number, a unit and a method reference for the sample actually tested. What the result column should contain | Parameter | Release limit | Result column | Assay | 98.0–101.0%, basis stated | A measured percentage with the basis and the standard named | Loss on drying | ≤10.0% | A measured percentage | Identity | Conforms to the reference | Retention time, spectrum and the ratios used | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot A pass statement is a conclusion, not a measurement. The reader should be able to rebuild it from the figures: a colony count plus an absence line for the micro tests, and a separate number for each metal. When the certificate gives one aggregated heavy-metal total, the element that drives the risk has disappeared into the sum. ## What moves between batches The colour, the moisture, the assay and the particle-size result move between lots. The final reaction step, the drying and the milling each leave a signature: drying moves the loss on drying, milling and sieving move the 80 mesh figure, and the crystallisation step moves the shade and the assay. A change of mill or sieve can move the particle-size line without any change in the chemistry, which is why that line belongs in the specification rather than in a note. Colour is the least quantitative line and the least reliable early warning. Dark red covers a wide window, and the main degradation product is also red, so a shade difference proves neither identity nor failure. A lot that has seen light can lose assay while the appearance still passes. When colour is the only concern, ask for the chromatogram and the spectrum rather than rejecting the pack on a photograph. A drift across several lots carries more information than one result near a limit: falling assay, rising moisture or an extra cobalamin peak. Traceability closes the loop, so the code printed on the certificate ought to be the same code on the pouch, the drum label and the sample kept in the retain cabinet. ## When an outside test is worth ordering An outside test earns its place at a new source, a first shipment into a regulated market, a disputed form or a light-damage concern. The panel then goes beyond the supplier's certificate: HPLC with a methylcobalamin standard plus a UV-Vis spectrum, the cobalamin profile for cyanocobalamin and hydroxocobalamin, loss on drying, ICP-MS for the metals and microbiology. Cobalt by ICP-OES lands near 4.4% for this molecule, but it cannot establish the ligand, because cyanocobalamin sits at 4.35% — too close to separate the forms on that number. Every screen should come with its detection limit, because “not detected” only means something relative to the method's reach. A report that omits the limit describes the instrument, not the powder. Keep the chain of custody intact too: the portion that was tested should be the portion that was retained, and the report should carry the lot code. ## What to compare between suppliers Put six lines side by side: form and CAS number; assay result and basis; the identity standard and the spectrum; loss on drying; the cobalamin profile; pack size and lot code. Two quotations that agree on assay but differ on the standard or basis describe different powders. Traceability comes next: who made the lot, which process and drying steps were used, and how the pack blocks light. The catalog specification sits on the methylcobalamin product page, and the cyanocobalamin 1% grade is a separate product with its own certificate. The tests that separate the methyl form from other cobalamins are on the identity page; the destination questions are on the compliance page; the HPLC method is described in the HPLC method note; the release workflow is on the quality page. ### 02 Methylcobalamin grades: crystal, granulation and the fill URL: https://nutrition.rainwoodbio.com/products/vitamins/methylcobalamin/grades/ Reviewed: 2026-11-20 Methylcobalamin is supplied as a crystalline powder at 98.0–101.0% by HPLC; the other options are a granulated form of the same powder, a dilution on a carrier for a low-dose fill, and the separate cyanocobalamin product. The grade is set by the dose per unit, the fill weight and the label, not by the assay number alone. A high assay on a powder that cannot be weighed accurately is not a better grade for a 100 µg capsule. In one lineThe grade is a dose decision: a crystalline methylcobalamin suits a milligram weigh-up, while a microgram dose needs a dilution whose carrier and uniformity are part of the specification. ## Why methylcobalamin is sold in more than one grade The catalog grade is the crystalline powder, and “grade” here does not mean a ladder of purities; it means the physical form and the dilution that the dosage form needs. Two facts drive the choice. First, the vitamins are dosed in micrograms: a 1,000 µg serving is one milligram of the active, and a 100 µg serving is a tenth of a milligram. Second, the powder is light-sensitive and hygroscopic, so every extra handling step is a chance to expose it. A formulator who can weigh a milligram accurately may use the crystal; one filling a 300 mg capsule with a 500 µg dose needs a dilution to carry the active evenly through the fill. A granulated methylcobalamin is the same molecule with a coarser, freer-flowing particle. It answers dust, static and flow problems on a high-speed line. It does not change the assay, the label or the light sensitivity, but it does change the particle-size line and may change the lead time. ## The grades side by side Methylcobalamin grades and the adjacent cyanocobalamin grade | Grade | Assay expression | Carrier | Typical use | Label effect | Crystalline powder, 80 mesh | 98.0–101.0% by HPLC | None | Milligram weigh-up, stock blends, capsules with a premix | Methylcobalamin named as the ingredient | Granulated powder | 98.0–101.0% by HPLC | None | Flow and dust control on a filling line | Same ingredient name; particle size changes | Dilution on a carrier | Declared as the nutrient per gram | Declared, food-grade | Microgram doses and small fill weights | Carrier becomes an ingredient | Cyanocobalamin 1% powder | ≥1.0% by HPLC | Starch or maltodextrin | The separate, more stable B12 grade | Different ingredient name The last row is a different product, not a grade of this one. It appears here because a buyer comparing B12 forms will meet it, and because its assay is expressed as a dilution percentage rather than as the purity of a crystal. A 98.0–101.0% methylcobalamin figure and a ≥1.0% cyanocobalamin figure describe different materials on different bases. The catalog covers the crystalline powder and the granulated form; a dilution is a separate brief, built by the customer or specified as its own project. ## The physical facts that decide handling The catalog powder is dark red and crystalline, with ≥95% through 80 mesh. It is only slightly soluble in water and gives a red solution at low concentration; a concentrated stock may need warming or a pH adjustment. The solid picks up moisture, and the loss-on-drying gate is ≤10.0%, which is wide enough that the packing and storage conditions do real work. Light is the other handling fact: the powder belongs in an opaque or foil pack, and a clear jar on a bench is an exposure, not storage. Bulk density and flow are not in the catalog specification. If the filling line is sensitive to either, ask for the figures on the lot rather than assuming them from the mesh size. Granulation changes the flow and the dust, and it can change the bulk density; it is a separate specification, not a packing note. ## Dose arithmetic and the fill A 1,000 µg label claim needs about 1.0 mg of methylcobalamin at 100% assay, or 1.02 mg at 98.0%. A 100 µg claim needs about 0.10 mg. Those masses are small against a capsule fill of several hundred milligrams, so the active is almost always carried into the fill as part of a premix or a dilution. The label declares vitamin B12 in micrograms, while the certificate describes the methylcobalamin powder; the two figures are linked by the assay and the serving weight, and they should be calculated together. A dilution is a formula, not a favour. Its carrier is declared, its assay is expressed per gram of the dilution, and its uniformity has to be demonstrated at the low dose. The crystalline grade remains the reference material behind that dilution, which is why the lot code on the crystal should be traceable through the blend. If the label names methylcobalamin, the dilution must be made from methylcobalamin and not from cyanocobalamin, however similar the two look. ## What to write into the specification - “Methylcobalamin, CAS 13422-55-4, C63H91CoN13O14P.” - “Assay 98.0–101.0% by HPLC against a methylcobalamin reference standard, with the basis stated.” - “Identification by HPLC retention and UV-Vis spectrum; report the maxima and the absorbance ratios.” - “Loss on drying ≤10.0%; heavy metals and microbiology as listed.” - “Particle size ≥95% through 80 mesh; granulated on request.” - “Pack in a light-resistant, moisture-barrier pouch or drum; state the storage condition.” - “Destination market and permitted-form route confirmed before the order.” ## When the crystalline grade is the wrong buy If the serving is a few hundred micrograms and the fill is a direct-compression capsule, the crystal is the wrong starting point: the weigh-up is too small to distribute evenly, and a dilution or a premix is the practical route. If the market file names the cyano form, the methyl crystal is outside that file even when the assay is higher. If the formula is an aqueous drink, the light and solution stability of the methyl form has to be validated before the grade question is settled. The reverse is also true. A buyer who needs a clean label with no carrier should not accept a dilution as “the same material” and adjust the number afterwards. The carrier is an ingredient, and the label has to say so. The product hub carries the catalog specification. The COA page shows how the assay is reported; the stability page covers the light and moisture margin; the level-four comparison takes the form question further; the cyanocobalamin product page describes the adjacent grade; the HPLC method note describes the assay; the quality page covers release and change control. ### 02.1 Methylcobalamin vs cyanocobalamin: form, stability and label URL: https://nutrition.rainwoodbio.com/products/vitamins/methylcobalamin/grades/methylcobalamin-vs-cyanocobalamin/ Reviewed: 2026-11-20 Methylcobalamin and cyanocobalamin share the corrin ring and the cobalt centre; the group on the cobalt is a methyl in one and a cyano in the other. That ligand changes the molecular weight, the photostability, the assay standard and the ingredient name, while the nutrition label still declares vitamin B12 in micrograms. The two are separate products with separate specifications, not two strengths of one material. In one lineOne ligand separates the two: methylcobalamin is the more photolabile form, cyanocobalamin the more stable reference form, and the label must name the form even though both declare vitamin B12. ## The ligand is the difference Cyanocobalamin carries a cyano group on the cobalt; methylcobalamin carries a methyl group. The rest of the molecule, including the corrin ring that gives the red colour, is the same. The substitution moves the molecular weight by about 11 units, from roughly 1,355 g/mol for the cyano form to roughly 1,344 g/mol for the methyl form, and it changes the CAS number and the formula. Those are the fields that should be compared on a certificate before any assay figure is read. Methylcobalamin and cyanocobalamin on the identity fields | Field | Methylcobalamin | Cyanocobalamin | CAS number | 13422-55-4 | 68-19-9 | Formula | C63H91CoN13O14P | C63H88CoN14O14P | Molecular weight | About 1,344 g/mol | About 1,355 g/mol | Cobalt ligand | Methyl | Cyano | UV-Vis maxima | About 267, 342 and 522 nm | About 361 and 550 nm | Ingredient name on the label | Methylcobalamin | Cyanocobalamin The colour is not a distinguishing test. Both are dark red, and the main degradation product of the methyl form is also red. A visual comparison of two powders tells the buyer almost nothing about which ligand is present. ## Stability separates them in practice The methyl ligand is more labile than the cyano ligand. In light, and especially in aqueous solution, methylcobalamin loses the methyl group and moves toward hydroxocobalamin; the assay falls and the spectrum changes. The solid is more forgiving than the solution, but the surface still reacts, and a clear container is an exposure whatever the ambient temperature. Cyanocobalamin is the more stable of the two forms, which is why it is the usual choice for a spray-dried 1% grade and for a process with a long light exposure. This is a margin, not a binary. Both forms need an opaque pack, a controlled process and a stability study in the finished matrix. The difference is how much room the form leaves for a normal filling room, a clear hopper or a warm hold. A methyl project should write the light-protection steps into the process description and check them on the line; a cyano project still needs the pack and the study, but it starts with a larger margin. ## What the label has to say The nutrition declaration states vitamin B12 in micrograms and as a percentage of the reference value, and that figure does not change with the form. The ingredient list is where the form appears: “methylcobalamin” or “cyanocobalamin”, named as the substance used. A product that contains both forms lists both. A label that says only “vitamin B12” in the ingredient list has left the form unnamed, and that is the point where a methyl product and a cyano product become indistinguishable on the shelf. The dilution adds a second obligation, but only on one side. The cyanocobalamin product is a 1% spray-dried powder, so its carrier, starch or maltodextrin, is an ingredient and must be declared. The methylcobalamin product is a crystalline powder with no carrier, so its ingredient list is shorter. Neither difference changes the nutrient figure, which is calculated from the assay and the serving weight rather than from the powder weight. ## The assay has to match the form Methylcobalamin is specified at 98.0–101.0% by HPLC; the cyanocobalamin 1% grade is specified at ≥1.0% by HPLC. Those figures are not two points on one scale. The first describes the purity of a crystalline material and the second describes the active content of a dilution, so a comparison needs the basis, the carrier and the serving weight before it means anything. The standard is the other half of the assay. A methyl sample should be run against a methylcobalamin reference standard, with the spectrum read at the methyl maxima and the ratios stated by the method. A cyanocobalamin standard read at 361 nm will produce a number for a methyl sample, but the number describes an assumption rather than the material. When two suppliers report the same percentage for the two forms, ask which standard and which wavelength produced it. ## What changes when the form changes A switch is a specification change, not a substitution at the balance. The table lists the fields that have to be rewritten; leaving one of them on the old form is how a label and a certificate stop matching. Fields that change with the form | Field | What changes | Specification | Name, CAS number, formula, assay expression and identity standard | Weigh-up | The mass per serving, because the assay expression and the dilution differ | Pack and process | The light-protection margin and the storage condition | Label | The ingredient name, and the carrier where a dilution is used | Stability file | The data for the new form and the new pack | Market file | The permitted-form route and the documents for the destination The dose figure needs care. Both forms are declared as vitamin B12 in micrograms, and the two molecular weights differ by under one percent — below the precision of a label claim, so the practical arithmetic is the assay and the dilution rather than a form factor. A 1,000 µg claim from the crystalline methyl powder is about a milligram of powder; the same claim from a 1% cyano powder is about a hundred milligrams of powder, and that difference in fill weight is the one that changes the capsule. ## The route is a separate question The permitted-form position is not settled by the chemistry. In the EU, Annex II of Directive 2002/46/EC is the list to check for food supplements; in the US, the dietary-ingredient basis and the finished product's compliance are separate questions; Great Britain and Northern Ireland do not share one file. The buyer's regulatory team confirms which entry or basis covers the grade for the destination, against the current text, and records the answer with the order. That answer belongs in writing before the label is approved. A form that is technically suitable and stable can still sit outside the file for a market, and a form with a clear route can be the wrong choice for a process that cannot protect it from light. The two questions are answered together, not in sequence. The methylcobalamin product page carries the crystalline specification; the vitamin B12 product page covers the cyanocobalamin 1% grade; the grades page places this comparison in the wider range; the cyano versus methyl page takes the regulatory question further; the analytical methods library covers the HPLC and UV work; the quality page describes the release file. ### 03 Methylcobalamin is photolabile: the pack decides the shelf life URL: https://nutrition.rainwoodbio.com/products/vitamins/methylcobalamin/stability/ Reviewed: 2026-11-20 Methylcobalamin is photolabile. A sealed, opaque pack at ambient temperature holds the solid within its specification; light, moisture and heat shorten the margin, and an aqueous solution is the hardest format. The shelf life is assigned from stability data for the exact pack and storage condition, not from the release assay. In one lineLight is the first failure mode: the methyl ligand is lost before the corrin ring is, so the assay falls and the spectrum changes while the powder can still look red. ## The powder: light, water and the seal The solid is crystalline, and the crystal slows the reaction, but the surface is where light and moisture act first. The catalog limits loss on drying to ≤10.0%, which is a release gate rather than a storage allowance. Once a foil pouch is opened, the powder can pick up water from the air; the as-is assay falls, the loss on drying climbs and the weigh-up changes. A dry store and a pack that closes properly are part of the specification in practice, even when they are not printed on the certificate. Light is the driver that matters most. The powder should stay in its original light-resistant pouch or in an opaque container that seals. A clear jar on a windowsill is an exposure experiment, not storage. Heat accelerates both the light reaction and the moisture pickup, so a loading bay, a car boot or a warm roof space is the wrong place for a drum, even for a short hold. Cyanocobalamin, the other common B12 form, is less photolabile; its product page covers that grade. Colour is a weak indicator. Methylcobalamin and its main photodegradation product are both red, so a shade difference does not settle the question. The assay and the UV-Vis spectrum are the evidence; the appearance line is a prompt to look, not a result. ## The solution: the least stable format In water, light, oxygen, heat and pH act at once. The methyl ligand is the reactive site, and the product of the light reaction is hydroxocobalamin, which has a different spectrum and a different retention time. A ready-to-drink process adds pasteurisation or hot fill on top of that. A powder stick avoids the aqueous hold, because the consumer adds water at the point of use and the concentrate is never stored as a liquid. If a liquid is unavoidable, protect it from light, control the pH, keep dissolved oxygen low and validate the hold time before filling. The spectrum of the cobalamin is pH-dependent, so the analytical method and the formula should use the same pH; that protects the identity test as well as the product. A bulk-powder stability result does not transfer to a beverage, and a beverage result does not transfer to a gummy. ## What drives degradation Factors that move methylcobalamin during storage | Factor | What it does | Control | Light | Loss of the methyl ligand; hydroxocobalamin forms | Opaque or foil pack; dark store; light-controlled filling | Moisture | Raises loss on drying; lowers the as-is assay | Sealed pouch; desiccant where needed | Heat | Accelerates the light and moisture reactions | Controlled store; cool process | Oxygen | Oxidation in solution and at exposed surfaces | Low headspace; sealed pack; deoxygenation | pH | Shifts the spectrum and the solution stability | Validate the matrix pH; match the method solvent | Neighbours | Ascorbic acid, iron salts and some minerals in a premix | Separate the sensitive ingredients; test the blend These factors are not independent. A warm, bright, humid store is worse than the sum of three separate effects, and a clear bottle of a low-pH drink combines all of them. The useful stability question is not “is methylcobalamin stable?” but “stable in which pack, at which condition, for how long, with which neighbours?” ## A stability protocol for the ingredient The protocol should name the pack, the condition, the time points and the panel. Warehouse conditions are covered by 25 °C/60% and 30 °C/65% relative humidity; 40 °C/75% relative humidity adds stress to the pack. A separate light-exposure arm is essential here, because a dark incubator cannot reveal the failure mode that matters most for the methyl form. Test assay, loss on drying, appearance, the UV-Vis spectrum and the cobalamin profile at every point, with microbiology at the start and the end. A stick pack or a liquid needs the work repeated in the matrix, at the process pH and under the same heat load. The report should list each result by time point and identify the pack and the batch family, not simply declare a pass. Request the summary for the container you are actually buying. Headspace, opening history and surface-to-volume ratio differ between a drum and a pouch, so results from one container do not describe the other. ## The finished formula changes the answer A capsule or tablet starts with low water activity, yet the shell and the excipients can still move moisture into the fill. Check the loss on drying at release and again after storage, and look at the cobalamin profile rather than only the assay. A stick pack fails at the seal: a pinhole in the foil is enough, so the strip is inspected as well as the powder. Neither format inherits the shelf life of the bulk pouch. A gummy is the harder case, because the cook adds heat and water and the finished piece keeps a water activity that a capsule never sees. A liquid combines light, pH, heat and oxygen. The formulator decides whether an overage is needed; that is a label and stability decision, and it does not repair a pack that lets light or moisture in. ## How the shelf life is set A single shelf-life figure would be misleading for this material, because the pack and the storage condition set the period. The retest interval is written into the specification and supported by data generated in that exact pack. Without the pack, the condition and the test panel, a period is an assertion rather than a result. When the retest interval expires, assay the retained sample again before extending use; a bulk period cannot be transferred to a container that was repacked later. The product hub lists the standard packs, the COA page sets out the release tests, the MOQ page covers pack and lead time, the HPLC note describes the assay and the quality page describes release. ### 04 Methylcobalamin: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/vitamins/methylcobalamin/moq/ Reviewed: 2026-11-20 The MOQ is 1 kg in a foil pouch, with a 25 kg fiber drum as the bulk pack and 1–7 days' lead time for the standard pack. At a microgram dose, one kilogram is a very large number of servings, so the minimum works as a lot-qualification unit rather than as a production quantity. To price and schedule the order, the supplier needs the form, the assay basis, the pack and quantity, the destination and Incoterm, the document list and the market where the material will be used. In one lineOne kilogram is the smallest unit that can be released as a lot, shipped as a parcel and retained as a sample; at this dose it is also far more material than a first trial needs. ## Why the minimum is 1 kg A 1 kg pouch covers a bench trial, a retained sample and an independent identity test, and it travels as a parcel rather than on a pallet. It is also a released lot with a single lot code, which is what a customer needs when a result is later disputed. Anything smaller is normally carved out of a larger batch and bagged again, which introduces extra handling and breaks the link between the original pack and the lot code without altering the material itself. The dose arithmetic explains why 1 kg is generous. At a 1,000 µg serving, one kilogram holds roughly a million servings before assay and overage are applied. A first production run for a small brand may use a fraction of the pouch, so the remainder becomes a storage commitment. That is a real constraint for a photolabile material: a long hold is a stability question, not only a stock question. The 25 kg drum lowers the handling per kilogram but lengthens the hold, so it belongs to a product with a confirmed plan. The cyanocobalamin 1% grade is a separate product with its own pack and stability profile; the vitamin B12 page covers it. ## Packs and formats Standard methylcobalamin packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Light and moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Separate specification; the particle-size line changes The catalog form is an 80 mesh powder: ≥95% through 80 mesh. Granulation is a different specification, not a packing choice, and it may move the lead time. If the filling line needs a coarser or freer-flowing powder, say so before the quotation, because the change is agreed against a particle-size result, not against the word “granulated”. ## Lead time and dispatch For the standard pack, allow one to seven days between order confirmation and dispatch. Picking, paperwork and handover to the carrier sit inside that window; freight transit, customs and the customer's own release sit outside it. A granulated lot or an unusual pack size takes longer, and the extra time should appear as its own line on the quotation. Ask for a dispatch date rather than a range. The pouch normally ships as a parcel and the drum as a pallet, and the Incoterm decides who books the movement and who clears entry. Documents should accompany the goods instead of trailing behind them. Because the material is photolabile, the route and the number of handling points also belong in the offer. ## What a quotation needs Six items make a quotation firm enough to compare: - Product and form. Methylcobalamin, CAS 13422-55-4, crystalline grade, with the identity standard named. - Specification. The assay figure and its basis, moisture, particle size, the metal panel and the micro tests. - Quantity and pack. A 1 kg pouch, a 25 kg drum or a granulated lot. - Delivery terms. Destination country, port or address, and the Incoterm. - Documents. Certificate per lot, technical data sheet, safety data sheet and any destination-specific statement. - Use and market. The application and the country where the finished product will be sold. A reply that omits the assay basis or the destination cannot be compared with another reply. The same powder may fit one market and fail the file for the next, so the document set is as much part of the offer as the pack. Commercial terms are not published here; they are set out in the quotation. ## The sample is a lot, not a demonstration The pouch doubles as the qualification sample. Before scaling, check identity, assay, moisture and microbiology, and retain a portion from that same pack. The lot code should agree across the sample, the certificate and the quotation; without that link the material is a demonstration rather than a qualified lot. At this dose, the qualification sample is also large enough to make a pilot blend, which creates a handling question: the portion taken for the trial is a repack, and the remainder is no longer an untouched pouch. Record the opening date, keep the pouch sealed and dark between uses, and do not regard the remainder as a fresh lot. If the trial needs less than a gram, ask for the split in writing and keep its lot code with the trial results. ## Terms to settle before the first order Commercial and quality terms belong in one document: Incoterm, pack, dispatch window, specification revision, a certificate for each lot, the retained sample, the retest period and the change route. Put them into a quality agreement before the first production order, while both sides still have room to negotiate. Two clauses matter for this material. The first is light protection: the pack, the liner and the storage condition should be written down, not left to the shipping department. The second is the assay basis: a dispute about a result is usually a dispute about the basis or the identity standard, so name both in the agreement and name the referee laboratory before a lot is rejected. The product hub carries the catalog specification; the COA page lists the release tests; the stability page covers the light and moisture margin; the compliance page covers the market files; the quality page describes the release and change-control route. ### 05 The regulatory file for methylcobalamin URL: https://nutrition.rainwoodbio.com/products/vitamins/methylcobalamin/compliance/ Reviewed: 2026-11-20 Methylcobalamin is a vitamin B12 form, and its regulatory file has to show three things at once: that the form is covered for the destination, that the lot meets the agreed specification, and that the finished label declares the nutrient and names the form. The buyer's regulatory team confirms the route; this page lists the framework and the documents that belong in the file, and it makes no disease-related claim. In one lineThe certificate describes the lot; the regulatory file shows the form, the limits and the label for the destination, and only the destination text settles the route. ## What the file contains The file holds four parts: the specification version for methylcobalamin, the certificate that released the lot, the limits and label rules for the finished product, and the change-control record for source, process and pack. The COA reports the lot, the technical data sheet states the specification and the SDS covers handling. None of them settles the destination route, which is recorded separately and owned by the brand placing the product on the market. The form is the first item because “vitamin B12” is a nutrient name, not an ingredient name. The specification and the label should both say methylcobalamin, and the file should quote the exact entry or basis relied on rather than the nutrient name alone. That is also the point where the methyl and cyano files diverge: a document written for cyanocobalamin does not automatically describe the methyl form. ## European Union For the EU, the permitted forms for food supplements sit in Annex II of Directive 2002/46/EC, so that annex is the first document to check against the grade. The labelling rules are in Regulation (EU) No 1169/2011: vitamin B12 is declared in µg per portion and per 100 g, with the percentage of the nutrient reference value, which is 2.5 µg. The ingredient list names the form used. Contaminants are governed by Commission Regulation (EU) 2023/915, which sets maximum levels for food supplements; read the consolidated text as of the review, because it is amended. Check the member-state practice as of the review, and record the version you checked in the file. The EU regulatory notes collect the framework references; they do not replace the current text. ## United States In the US, methylcobalamin is positioned as a dietary ingredient, and the supplement is made under the cGMP rule at 21 CFR 111. The Supplement Facts panel declares vitamin B12 in µg and as a percentage of the Daily Value, 2.4 µg for adults and children four years and older, and the ingredient list names methylcobalamin. Whether a particular ingredient is a dietary ingredient marketed before 1994 or rests on a notification is a supplier question; the supplier states the basis it relies on and the buyer checks that the basis extends to the finished product. The US does not set a general heavy-metal limit for dietary supplements. The practical ceilings come from the customer specification, state law and the finished-product risk assessment. Structure/function claims are permitted with the DSHEA disclaimer and substantiation; disease claims follow a different route. The raw-material data sheet carries no claim, and this page reproduces none. ## Contaminants and limits Metal limits belong to the food as consumed, so the drum result is only the first input. The table supplies a starting point for a supplement file; the destination text and the daily dose turn it into a finished-product limit. Heavy metals to confirm for the finished product | Parameter | EU supplement ceiling | Catalog specification | What the file should show | Lead (Pb) | 3.0 mg/kg | ≤3 mg/kg | Lot result, method and the finished-product calculation | Cadmium (Cd) | 1.0 mg/kg | ≤1 mg/kg | Lot result and any category exception that applies | Mercury (Hg) | 0.1 mg/kg | ≤0.1 mg/kg | Lot result and method | Arsenic (As) | No general EU ceiling | ≤2 mg/kg | The agreed limit and the method, stated on the certificate The ceilings apply to the food as sold, not to the drum. At a microgram dose the powder is a very small fraction of the tablet or capsule, so a material at the specification limit can still leave room in the finished product — or lose that room once the rest of the formula is added. The purchasing specification sits at or below the ceiling, and the finished-product calculation decides the margin. ## Claims and the label In the EU and the UK, health claims must come from the authorised list, in the authorised wording and under the stated conditions of use. The claims attach to the nutrient vitamin B12 and its conditions, not to the methyl ligand, so the form does not create a new claim and does not remove the need for one. In the US, a structure/function claim needs the disclaimer and substantiation. No disease claim is open in either market, and this site publishes no health claim. The label statement that belongs in the file is narrower: the nutrient name and amount, the form in the ingredient list, and the carrier where a dilution is used. The claim review is a separate document with its own reviewer. A certificate supports the material, not the claim, and a change of claim does not reopen the specification. ## Documents for the methylcobalamin file Documents that travel with a methylcobalamin lot | Document | What it shows | When it is needed | Batch COA | Results against the specification, with methods and basis | Every shipment | Technical data sheet | Catalog specification, pack and storage | First order and technical review | Safety data sheet | Handling, dust and disposal information | Every shipment and for EHS | Agreed specification | Customer limits, identity standard and basis | Before the first order | Allergen and non-GMO statements | Carrier and processing position | Label review and customer request | Origin and change-control record | Manufacturer, site, process and pack changes | Qualification and audit | Stability and retest data | Pack, conditions and the supported period | Quality agreement The lot code links every document to the pack. The manufacturer and site belong in the same file, and the specification version on the certificate should match the version in the quotation. The assay behind the certificate is described in the HPLC method note. ## Checklist before the first order - Specification version, CAS number and the methyl form are named. - The permitted-form route and label rules for each destination are recorded, with the text version checked. - COA, TDS, SDS, allergen, non-GMO, origin and change-control documents are on file. - The contaminant results are converted to the finished-product dose. - The label names methylcobalamin as the ingredient and vitamin B12 as the nutrient, with the carrier declared where used. - The claim wording, if any, is authorised and substantiated, and no disease claim is made. - The quotation, the specification and the certificate refer to the same version. The product hub carries the catalog specification; the identity page covers the analytical evidence; the cyanocobalamin product page describes the adjacent form; the quality page describes the release file. ### 06 How we prove a lot is methylcobalamin URL: https://nutrition.rainwoodbio.com/products/vitamins/methylcobalamin/identity/ Reviewed: 2026-11-20 A methylcobalamin lot is the methyl form when four lines agree: the document names the form and CAS number, HPLC retention against a methylcobalamin standard and the UV-Vis spectrum match, the cobalamin profile shows no other form above its limit, and the assay and moisture close the mass balance. An assay expressed only as vitamin B12 cannot separate methylcobalamin from cyanocobalamin, because both are cobalamins with a similar response. In one lineThe methyl ligand is the identity: retention and the spectrum at about 267, 342 and 522 nm separate it from cyanocobalamin, and the cobalamin profile shows what else is in the peak. ## The four identity layers Paperwork can name methylcobalamin correctly while saying nothing about the solid in the drum. Each layer in the table asks a different question, and the answer to one does not cover the next. A supplier who stops at the first layer has described a label, not a lot. Four layers of methylcobalamin identity | Layer | Question | Test | What it proves | Document | Is the form named? | Name, CAS number, formula | Paperwork only | Chromatography | Is the cobalamin methylcobalamin? | HPLC retention against a methyl standard plus UV-Vis spectrum | The ligand and the corrin ring | Profile | What else is in the peak? | HPLC for cyanocobalamin, hydroxocobalamin and other cobalamins | Purity of the form | Mass balance | Is it diluted? | Assay, loss on drying, impurities | Consistency of the numbers ## HPLC and UV-Vis: proving the methyl form The method should name the column, the mobile phase, the wavelength, the solvent and the reference standard. Identity is retention time plus spectrum. A single peak at the right time can be another cobalamin or a degraded standard, so the spectrum is the second dimension rather than a decoration. Methylcobalamin in neutral solution shows maxima near 267, 342 and 522 nm; cyanocobalamin shows maxima near 361 and 550 nm. The gap between those sets is wide enough to read, provided the method uses the right standard and the right solvent. Use a methylcobalamin reference standard for both identity and assay. Running a methyl sample against a cyanocobalamin standard with an assumed response factor produces a number that looks plausible and describes a different molecule. The standard should be traceable, within its expiry and stored as the certificate directs; a degraded standard changes the retention and the spectrum at the same time. ## The ratios that carry the identity Two ratios do the work. The first is the absorbance ratio at the three maxima. The method should state the ratios it expects, because the spectrum is pH-dependent: in dilute acid the maxima shift to about 264, 304 and 462 nm, so a spectrum measured in the wrong solvent will not match a neutral-solution reference. The second is the chromatographic ratio of the methylcobalamin peak area to the total cobalamin area. The specification should set a limit for each named cobalamin rather than one general purity figure, so that a cyanocobalamin impurity and a hydroxocobalamin impurity are both visible. Cobalt is a supporting figure, not the deciding one. The methyl form is about 4.38% cobalt by mass and cyanocobalamin about 4.35%; the difference is too small to separate the two forms on a cobalt result. A cobalt figure near the theoretical value confirms that the material is a cobalamin and helps catch a dilution, but the ligand is proved by the chromatogram and the spectrum. ## X-ray diffraction: the solid-state check X-ray diffraction answers a different question: is the solid crystalline, and does its pattern match a reference? Methylcobalamin is supplied as a crystalline powder, so a pattern is meaningful; it can distinguish the crystal from an amorphous trituration or a lyophilised powder, and it can compare lots from two sources. On a diluted grade the carrier dominates the pattern, which is itself useful evidence of what was added. XRD is not a purity assay and it does not identify the ligand. It is not a routine release test for this product, and a certificate that reports only “XRD conforms” without the pattern or the reference has added little. Ask for the reference pattern and the detection limit before reading a match statement. For a disputed lot, XRD plus HPLC/UV plus the cobalamin profile is stronger than any one of them. ## What adulteration looks like Common methylcobalamin substitutions and the signals | Adulterant | What it does | Signal | Test | Cyanocobalamin | The other common B12 form; similar colour and assay response | Retention and spectrum differ; cyano peak present | HPLC/UV against a methyl standard | Hydroxocobalamin | Light-degradation product; red, so colour still passes | Extra peak; spectrum shift | HPLC profile, UV-Vis | Dilution on a carrier | Lowers the assay; adds a carrier | Assay low; loss on drying and ash move | Mass balance, carrier identification | Dye | Matches the dark red colour, not the spectrum | Colour without a UV match | UV-Vis, HPLC | Moisture | Raises loss on drying; lowers the as-is assay | LOD high; anhydrous assay normal | Loss on drying Colour is the weakest signal, because the molecule and its main degradation product are both red and a dye can reproduce the shade. The stronger signals are the retention time, the spectrum and the cobalamin ratio. A certificate that reports appearance and assay but not identity has left the most likely substitution untested. ## How to write the identity into the specification - “Methylcobalamin, CAS 13422-55-4, C63H91CoN13O14P.” - “Assay 98.0–101.0% by HPLC against a methylcobalamin reference standard; state the basis.” - “Identification by HPLC retention and UV-Vis spectrum; report the maxima and the absorbance ratios.” - “Cobalamin profile: limits for cyanocobalamin and hydroxocobalamin, each reported separately.” - “Loss on drying ≤10.0%; heavy metals and microbiology as listed.” - “Particle size ≥95% through 80 mesh; pack in a light-resistant, moisture-barrier container.” - “The destination market, the intended use and the form are agreed in writing before release.” ## Questions to put to the supplier - What is the form and CAS number printed on this lot's certificate? - Can you provide the HPLC chromatogram and the full UV-Vis spectrum, not only the assay percentage? - Which reference standard was used, and in which solvent was the spectrum measured? - What are the cyanocobalamin and hydroxocobalamin results for this lot? - If the lot is disputed, will you accept a joint re-test on the retained sample? The five answers together make an identity file; any one alone leaves a gap. The product hub carries the catalog specification, the COA page shows where each result sits, the grades page compares the physical forms, the level-four comparison covers the label and stability consequences, the cyanocobalamin page covers the other form, the HPLC method note explains the separation, and the quality page describes release. ### 01 What a pyridoxal 5-phosphate certificate has to show URL: https://nutrition.rainwoodbio.com/products/vitamins/pyridoxal-5-phosphate/coa/ Reviewed: 2026-11-20 A P5P certificate is read for three things: which solid was released, how much pyridoxal 5-phosphate it contains on a stated basis, and what the water and impurity figures say about the rest of the mass. The catalog specification is the window; the lot certificate is the measurement. The two are comparable only when the hydrate and the assay basis are named. In one lineThe assay is only meaningful with its basis and its hydrate: a P5P figure by HPLC, the water beside it, and an identity that the hydrochloride cannot produce. ## Reading the sheet from the top A laboratory record is auditable when each parameter appears with its method and its release limit. “Conforms” on its own is a verdict without a basis, and a buyer cannot check a verdict. Two rows deserve particular attention on this product: the identity row, which says whether the phosphate is present, and the water row, which decides how the assay should be read. Release tests for pyridoxal 5-phosphate powder | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | HPLC retention and UV spectrum | Conforms to the reference | Assay | HPLC with external standard | 98.0–101.0% | Loss on drying | Gravimetric | ≤8.0% | pH (1% solution) | Potentiometry | 3.0–4.5 | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh The assay comes from a separation, not a titration. The method should specify the stationary phase and mobile phase, the detection wavelength and the reference standard, and it should separate P5P from pyridoxal, pyridoxine and pyridoxamine. A peak at the right retention time is one axis of identity; the UV spectrum is the other. ## Water, hydrate and the assay basis The molecule exists as the free acid (247.14 g/mol) and as the monohydrate (265.16 g/mol). The monohydrate is 6.8% water, and the catalog permits loss on drying up to 8.0%, so the water line cannot be treated as a trace figure. A 99.0% result on the dried solid, with 6.8% water, is about 92.3% as received. The same 99.0% read as-is becomes about 106.2% on the dried basis. Both may be written as “99%”, yet they describe different powders. The certificate should put the basis in the assay row and print the measured water beside it. The catalog window is 98.0–101.0% by HPLC; the specification has to say whether that window applies to the material as weighed or to the dried solid. An 8.0% water allowance is large enough to move the result by several points, and a purchase order that does not settle the basis cannot be checked at goods-in. The UV identity carries its own condition: pH. In acidic solution the absorption maximum is near 295–299 nm; above pH 4 it moves to about 388–390 nm, and the solution turns from colourless to yellow. A 1% solution inside the 3.0–4.5 window can therefore show either spectrum. Unless the method fixes the diluent and its pH, the UV result is not reproducible, and “UV conforms” without the preparation says little. ## The gate and the measurement The release limit and the batch result are different numbers and belong in different columns. The gate is what was agreed; the measurement is what the laboratory found in that lot. A sheet that repeats the window in both columns has told the reader nothing about the drum. How the result column should be filled | Parameter | Release limit | Result column | Assay | 98.0–101.0% by HPLC | A measured percentage with the basis and the standard | Loss on drying | ≤8.0% | A measured percentage, with the method | pH | 3.0–4.5 | A measured pH with the concentration and the solvent | Heavy metals | Per element | A figure in mg/kg for each element | Particle size | ≥95% through 80 mesh | The measured percentage through the sieve A pass statement summarises; the rows should let the reader reproduce it. Metals require one figure per element rather than a total. Microbiology requires a count and an absence statement. The assay requires a number, a basis and a method, and without all three it cannot be compared with the next lot. ## Where lots differ Water is the first number to watch between lots. Drying conditions and the pack set it, and the as-is assay follows it down even when the dried-basis figure is stable. pH tracks residual acid and the crystallisation step. Particle size depends on the mill: the catalog grade is 80 mesh, and a granulated or coarser grade is a different finishing specification. Hydrolysis shows in the related-substance profile. The phosphate ester can split off to pyridoxal, and heat and time are the usual causes. A growing peak beside the main one, or a rising total, is a warning even while the assay remains inside its window. The hydrate form can also shift with drying, which is another reason to read the water row with the assay. Trends across several lots are more informative than a single result near a limit: water creeping up, pH drifting, the as-is assay falling, or the pyridoxal peak growing. The lot code on the sheet should be the same code on the pouch, the drum and the retained sample. ## Bringing in an outside laboratory Independent testing is worth commissioning when the supplier's sheet cannot settle the question: a new source, a first shipment into a regulated market, a disputed hydrate, or a label that depends on the phosphate figure. The panel should be built around that question rather than repeat the whole certificate. HPLC with a diode array and a pH-controlled diluent covers identity and assay; loss on drying or Karl Fischer covers water; phosphorus by ICP-OES covers the phosphate; chloride by ion chromatography rules out the hydrochloride; the metal panel and microbiology complete the picture. Detection limits belong in the report. A “none found” entry without a limit describes the sensitivity of the method, not the cleanliness of the lot. Chain of custody also matters: the test should run on the retained sample, the report should carry the lot code, and any referee should receive the sample, the supplier's sheet and the agreed specification. If the form is in dispute, the referee needs the tests that separate the forms, not a second run of the same assay. ## Comparing two offers Six lines expose most of the difference: form and CAS; assay with its basis; water; pH; phosphorus, or chloride where a hydrochloride is suspected; and mesh plus pack. Two offers that both say “98%” but disagree on the hydrate or the basis are not the same material. Then check traceability. The sheet should identify the manufacturing site, the drying and milling steps, and the hydrate that was released. The catalog window is on the P5P product page; the phosphate tests are on the identity page; the hydrate comparison is on the grades page; the assay separation is described in the methods library; the release sequence is on the quality page. ### 02 Pyridoxal 5-phosphate grades: hydrate, mesh and assay basis URL: https://nutrition.rainwoodbio.com/products/vitamins/pyridoxal-5-phosphate/grades/ Reviewed: 2026-11-20 Pyridoxal 5-phosphate is sold as the free acid (CAS 54-47-7, 247.14 g/mol) or as the monohydrate (CAS 41468-25-1, 265.16 g/mol). The two differ by one water molecule, 6.8% of the monohydrate's mass, and that difference moves the assay basis, the weigh-out and the label arithmetic. Mesh and flow are the other grade variables: the catalog grade is an 80 mesh powder, with granulation on request. In one lineThe grade decision is the hydrate, the mesh and the assay basis: the monohydrate carries 6.8% water and 7.3% more mass per unit of P5P than the free acid. ## Why the hydrate is a grade question P5P is a pyridine derivative with an aldehyde group and a phosphate ester. The free acid is the anhydrous molecule; the monohydrate holds one water molecule in the crystal. Both are the same active moiety, but they are different solids with different molecular weights and different CAS numbers. A specification that names only “pyridoxal 5-phosphate” has not said which solid is in the drum. The catalog names the free acid, CAS 54-47-7 and the anhydrous formula, and it allows loss on drying up to 8.0%. That window is wide enough to admit the monohydrate and partly hydrated lots. The certificate therefore has to state the hydrate form and the water result, and the buyer has to decide whether the hydrate is acceptable before the first order rather than after the first weigh-out. ## The two P5P forms side by side Pyridoxal 5-phosphate free acid and monohydrate | Property | Free acid | Monohydrate | CAS number | 54-47-7 | 41468-25-1 | Formula | C8H10NO6P | C8H10NO6P·H2O | Molecular weight | 247.14 | 265.16 | Water of crystallisation | None | 6.8% theoretical | Phosphorus content | 12.53% | 11.68% | Vitamin B6 equivalent | 68.5% | 63.8% | Mass for 100 mg P5P | 100 mg | 107.3 mg | Typical use | Dry blends where mass is fixed | The usual commercial solid The mass row is the one that reaches the balance. A formulator who switches from the free acid to the monohydrate without changing the weigh-out has reduced the P5P in the batch by 6.8%. The reverse switch over-doses by the same fraction. Neither error shows on a certificate that reports only a percentage. ## Solubility, pH and handling P5P dissolves in water less readily than pyridoxine hydrochloride, and its solubility depends on pH. The catalog sets pH 3.0–4.5 for a 1% solution, which is the acidity the material gives in water; a more concentrated stock may need warming, a longer mix or a pH adjustment, because solubility is finite. The solution is not colourless at every pH: it is colourless in acid and turns yellow as the pH rises above about 4. That colour is a pH effect, not a purity signal. The solid is hygroscopic. The monohydrate already contains its crystal water, but an opened pouch can pick up additional surface water, and the loss on drying rises. Keep the powder in the original foil pouch or an opaque, tightly closed container. Light, especially ultraviolet, is the second handling constraint; a clear jar on a bench is the wrong container for a hold. Particle size is a finishing grade rather than a chemical one. The standard 80 mesh powder flows and disperses well in a dry blend; a granulated grade reduces dust and improves flow on a high-speed press. Changing the mesh changes the bulk density and the blend behaviour, so it belongs in the order, not in a note after the fact. ## Dose arithmetic and the label The conversion between the forms is fixed by the molecular weights: 265.16 ÷ 247.14 = 1.0729. To deliver 100 mg of P5P free acid, weigh 107.3 mg of the monohydrate. To express a monohydrate result as free acid, multiply by 0.932. These are label and weigh-up calculations, not a dose recommendation. The vitamin B6 declaration is a second conversion. The pyridoxine equivalent is 68.5% of the free acid and 63.8% of the monohydrate, so 100 mg of either solid declares about 68.5 mg or 63.8 mg of vitamin B6 respectively. The percentage on the certificate is not the vitamin B6 figure: a 99.0% P5P assay still declares the pyridoxine equivalent, and the water and the phosphate are not vitamin B6. The assay basis is the third number. A lot at 99.0% on the dried solid with 6.8% water is 92.3% as received; a lot at 99.0% as-is is 106.2% on the dried basis. The specification, the certificate and the label should use the same basis, and the water result should travel with it. ## What to write into the specification - “Pyridoxal 5-phosphate monohydrate, CAS 41468-25-1, C8H10NO6P·H2O”, or the free acid with its CAS and formula. - “Assay 98.0–101.0% by HPLC”, with the basis stated as as-is or on the dried solid. - “Loss on drying ≤8.0%, measured and reported on every lot.” - “pH 3.0–4.5 in a 1% solution, with the solvent named.” - “Identification by HPLC retention and UV spectrum, with the diluent pH fixed.” - “Particle size ≥95% through 80 mesh; granulated grade on request.” - “Hygroscopic; store in the original sealed, light-resistant pack.” We supply the powder at the catalog specification. A switch between the free acid and the monohydrate is a specification change, not a packing choice, and it should be handled through a written change control with the label arithmetic rechecked. ## When another grade is the better fit If the label and the market file are already built on pyridoxine hydrochloride, the hydrochloride is the simpler purchase: it dissolves freely, its assay is on a narrow dried basis, and its entry is a different line in the source list. P5P is not a drop-in for it, and the hydrochloride is not a drop-in for P5P. If the formula is a dry blend where the P5P mass per unit is fixed, the anhydrous free acid avoids carrying 6.8% water into the calculation. If the formula is aqueous, the monohydrate is usually acceptable once the extra mass is written into the batch record. The choice belongs to the specification, not to the supplier's stock position. The product hub carries the catalog specification; the level-four comparison sets the two B6 forms against each other; the COA page shows how the hydrate is reported; the compliance page covers the label entries; the identity page gives the tests that distinguish the forms. ### 02.1 Pyridoxal 5-phosphate vs pyridoxine HCl: form, assay and label URL: https://nutrition.rainwoodbio.com/products/vitamins/pyridoxal-5-phosphate/grades/pyridoxal-5-phosphate-vs-pyridoxine-hcl/ Reviewed: 2026-11-20 Pyridoxal 5-phosphate and pyridoxine hydrochloride are different vitamin B6 sources, not two grades of one substance. P5P is the phosphorylated aldehyde, supplied as the free acid (247.14 g/mol) or the monohydrate (265.16 g/mol); pyridoxine hydrochloride is a chloride salt (205.64 g/mol) with 82.3% pyridoxine by mass. The P5P assay is by HPLC at 98.0–101.0% with water allowed up to 8.0%; the hydrochloride assay is a titration at 99.0–101.0% on the dried basis with water limited to 0.5%. The form also changes the label entry and the ingredient name. In one lineThe form decides the assay basis and the label: P5P is measured by HPLC with its hydrate water declared, the hydrochloride by titration on the dried basis, and the two sit under different entries. ## Two substances, three solids Pyridoxal 5-phosphate and pyridoxine hydrochloride compared | Property | P5P free acid | P5P monohydrate | Pyridoxine HCl | CAS number | 54-47-7 | 41468-25-1 | 58-56-0 | Formula | C8H10NO6P | C8H10NO6P·H2O | C8H11NO3·HCl | Molecular weight | 247.14 | 265.16 | 205.64 | Counter-ion | Phosphate ester | Phosphate ester, one water | Chloride, 16.9–17.6% | Water | Anhydrous | 6.8% theoretical | ≤0.5% | Vitamin B6 equivalent | 68.5% | 63.8% | 82.3% | Assay method | HPLC | HPLC | Non-aqueous titration | Assay window | 98.0–101.0% | 98.0–101.0% | 99.0–101.0%, dried basis “P5P” without a hydrate is an incomplete name. The two P5P solids differ by 7.3% in mass; the hydrochloride is a third substance with a different counter-ion and label name. A certificate, a purchase order and a label that all say “vitamin B6” can still describe three materials. ## The assay basis is the difference that shows The P5P assay is a chromatographic separation, and the certificate has to state whether 98.0–101.0% is calculated on the material as weighed or on the dried solid. With water allowed up to 8.0%, the gap is large: a monohydrate lot at 99.0% on the dried solid and 6.8% water is about 92.3% as-is, while a 99.0% as-is figure is about 106.2% on the dried basis. The hydrochloride is different: its 99.0–101.0% window is on the dried basis and its water is capped at 0.5%, so the as-is figure moves by less than a point. A 99% result therefore does not mean the same thing on the two certificates. The methods also answer different questions. HPLC separates P5P from pyridoxal, pyridoxine and pyridoxamine, so the peak area is a measure of the phosphate form. The hydrochloride assay is a titration of the base, read with the chloride line; a low chloride with a normal titration points to free base or another B6 form, not to pure hydrochloride. Neither method substitutes for the other, and a specification cannot cross between them with a new percentage. ## What each form is called on the label In the EU, Annex II of Directive 2002/46/EC lists vitamin B6 forms at 9(a) pyridoxine hydrochloride, 9(b) pyridoxine 5′-phosphate and 9(c) pyridoxal 5′-phosphate. Entry 9(b) is a different phosphate ester; P5P is 9(c). The two materials sit under different entries, so the source name has to match the form in the drum. The monohydrate is not named separately; the buyer's regulatory team confirms the hydrate and the finished product fall within the entry for the destination, against the current consolidated text. The nutrition declaration is separate. It gives vitamin B6 in milligrams and as a percentage of the nutrient reference value, 1.4 mg in the EU and the UK and 1.7 mg as the US daily value. The vitamin B6 figure is calculated from the pyridoxine equivalent, not from the weight of the phosphate or the chloride. A product with both forms has to declare both, even though the panel shows one vitamin B6 total. In the US, the Supplement Facts panel follows 21 CFR 101.36 and the ingredient list names the form, commonly pyridoxal 5′-phosphate for P5P and pyridoxine hydrochloride for the salt. The claim boundary does not move with the form: no disease claim is available, and a structure/function statement needs its disclaimer. The claim belongs to the finished product. ## Potency per milligram and the weigh-out A label claim is a vitamin B6 claim, so the mass of powder depends on the form. A 50 mg vitamin B6 claim needs about 73 mg of P5P free acid, 78 mg of the monohydrate, or 61 mg of pyridoxine hydrochloride. Put the other way, 100 mg of each powder declares about 68.5 mg, 63.8 mg and 82.3 mg of vitamin B6 respectively. These are label arithmetic, not a dose recommendation. The hydrate adds a second step. To deliver 100 mg of P5P free acid, weigh 107.3 mg of the monohydrate, because 265.16 ÷ 247.14 = 1.0729. A switch from the free acid to the monohydrate at the same weigh-out reduces the P5P in the batch by 6.8% and the label claim with it. The assay percentage does not repair that error; it only describes the powder that was weighed. An overage is set from the loss curve of the specific form in the specific matrix. A figure carried over from the hydrochloride is not evidence for P5P, or from the free acid for the monohydrate. ## When to choose which The hydrochloride is the simpler choice for a dry blend or a tablet when the artwork and the market file are already built on it. It dissolves freely, its assay is on a narrow dried basis, and its entry is 9(a). Those are file advantages, not a ranking of the two vitamin sources. P5P fits a formula built around the phosphorylated form, and the monohydrate is the usual commercial solid. It is less soluble than the hydrochloride, its solution is acidic, and both the powder and the solution need protection from light. A liquid formula has to fix the pH in the acidic range and validate the hold; a dry blend has to account for the hydrate water in the weigh-out. Neither form is a drop-in for the other. A switch changes the identity, the assay basis, the potency per milligram and the label entry, and it needs a written change control, a new specification and a label check before the first batch. ## What to write when you switch - The chemical name, the hydrate form and the CAS number, written out in full. - The assay method and its basis: HPLC and as-is or dried for P5P; titration and dried basis for the hydrochloride. - The water limit and the measured loss on drying for the lot. - The label entry and the source name for each destination market. - The potency calculation from the pyridoxine moiety, with the weigh-out for the target claim. - The stability data for the new form in the new matrix and pack. The P5P product hub carries the catalog specification; the vitamin B6 product page carries the hydrochloride file; the grades page covers the hydrate and mesh choice; the compliance page covers the entries and claims; the methods library describes the HPLC assay; the quality page describes the release workflow. ### 03 Pyridoxal 5-phosphate stability: light, water and the pack URL: https://nutrition.rainwoodbio.com/products/vitamins/pyridoxal-5-phosphate/stability/ Reviewed: 2026-11-20 Pyridoxal 5-phosphate is sensitive to light, heat and moisture, and its solution stability depends on pH. The dry powder in a sealed, light-resistant pack is the most durable format; an aqueous stock is the least durable and should be prepared for a defined hold rather than for storage. Shelf life is assigned from data for the exact pack and storage condition, not from the certificate. In one lineLight, heat and moisture are the three variables the pack and the process control; a P5P shelf life is only as good as the data for the exact pack. ## The powder: water, light and the seal The catalog allows loss on drying up to 8.0%, and if the lot is the monohydrate, 6.8% of that is crystal water. The remaining headroom is small. An opened pouch in a humid room picks up surface water, the loss on drying rises, and the as-is assay falls even when the dried-basis assay has not moved. The 1 kg foil pouch is the barrier; a folded-over opening is not a seal, and a clear bag is not a barrier against light. Light is the second route. P5P absorbs in the ultraviolet, and exposure changes both the assay and the related-substance profile. Keep the powder in the original pouch or an opaque container that closes properly, and take out only the portion for the batch. A transparent jar on a bench is an exposure, however short the hold is meant to be. Heat accelerates both water pickup and photodegradation. A sealed pack in a cool, dry store is the default; a hot loading bay, a car boot or a greenhouse is not. If a pack has been in cold storage, let it reach room temperature before opening so that condensation does not form on the powder. ## The solution: pH decides the rate P5P dissolves in water to give an acidic solution, pH 3.0–4.5 at 1%. That acidic range is also the one in which the phosphate ester is least prone to hydrolysis. As the pH rises above about 4, the solution turns yellow and the absorption spectrum shifts; the phosphate ester also becomes more prone to hydrolysis, which splits P5P into pyridoxal and phosphate. Heat and light accelerate both changes. If a liquid is unavoidable, fix the pH in the acidic range, protect the vessel from light, keep dissolved oxygen low and validate the hold time before filling. A bulk-powder stability result does not transfer to a beverage: the matrix, the process heat load and the pack each change the rate. A stock solution should carry a preparation date and a discard time, and it should not be carried over from one shift to the next on the assumption that a refrigerator stops the reaction. ## What drives degradation Factors that move pyridoxal 5-phosphate during storage | Factor | What it does | Control | Light, especially UV | Photodegradation; assay loss and new peaks | Foil or opaque pack; dark handling | Heat | Accelerates hydrolysis and oxidation | Cool process; controlled store | Moisture | Raises loss on drying; lowers the as-is assay | Sealed pouch; desiccant where needed | pH | Shifts the spectrum; alkaline pH speeds hydrolysis | Keep solutions acidic; validate the matrix | Oxygen and metals | Oxidation, helped by trace iron and copper | Low headspace; compatible contact materials | Matrix | Water activity and process heat set the rate | Test in the finished formula and pack These factors act together. A warm, bright, humid store is worse than the sum of three separate effects, and an alkaline solution in clear glass combines pH, light and oxygen in one container. The useful question is not whether P5P is stable, but in which pack, at which condition and for how long. ## A stability protocol for the ingredient A useful protocol states the pack, the storage condition, the time points and the tests. Long-term storage at 25 °C and 60% relative humidity, intermediate storage at 30 °C and 65% where the destination climate calls for it, and accelerated storage at 40 °C and 75% cover the usual warehouse and transport range. A light-exposure arm following the standard photostability design covers the failure mode a dark incubator misses. Test assay with its basis, loss on drying, pH, appearance, identity and the related-substance profile at each point. The related-substance result is the one that shows hydrolysis before the assay falls out of the window. The report should show the individual results, not only a pass statement, and it should identify the pack and the lot family. Ask for the summary for the pack you will buy. A 1 kg pouch and a 25 kg drum have different headspace, different surface-to-volume ratios and different opening histories, so the data belongs to the pack. ## The finished formula changes the answer A two-piece capsule is the gentlest matrix: low water, no heat and no compression. A direct-compression tablet is close behind. A wet-granulated tablet adds water and a drying step, a gummy adds heat and a lasting water activity, and a drink adds pH, light and a hold before filling. The same P5P lot can pass in one matrix and fail in another. Excipients matter here more than for a stable mineral. An alkaline excipient or an alkaline buffer can raise the local pH of a wet mass, which is the condition P5P tolerates least. If the formula needs an alkaline component, keep it out of the wet phase and check the granulate for assay and related substances, not only for moisture. An overage is a label and stability decision, and it does not repair a pack that lets light or moisture in. Set it from the loss curve of the specific form in the specific matrix, and do not carry an overage across from pyridoxine hydrochloride. ## How the shelf life is set We do not publish a single shelf-life number for P5P, because the pack and the storage condition set it. The assigned retest period belongs on the specification and is supported by the stability file for that pack. A number without a pack, a condition and a test panel is a claim, not a shelf life. After the retest period, re-assay the retained sample before extending use. Do not extend by assumption, and do not carry a bulk figure across to a repacked container. A repack into a smaller opaque container is a new pack with a new opening history, even when the powder is unchanged. The product hub lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the methods library describes the HPLC assay; the quality page describes the release workflow. ### 04 Pyridoxal 5-phosphate: MOQ, packs and ordering URL: https://nutrition.rainwoodbio.com/products/vitamins/pyridoxal-5-phosphate/moq/ Reviewed: 2026-11-20 The minimum order for pyridoxal 5-phosphate is 1 kg, supplied in a foil pouch; the production pack is a 25 kg fiber drum. A released lot ships in 1–7 days. A firm quotation needs six details: the hydrate form and CAS, the assay basis, the quantity and pack, the destination and Incoterm, the documents, and the market where the finished product will be sold. In one lineOne kilogram is the smallest unit that can be sealed, sampled and traced as a lot, which matters more for a hygroscopic phosphate than the quantity itself. ## Why the minimum is 1 kg At 25 mg of P5P per portion, one kilogram is 40,000 portions; at 10 mg it is 100,000. A first trial needs a small fraction of that, so the minimum is not a volume threshold. It is the smallest pack that leaves the factory sealed, carries its own lot code and certificate, and keeps a retained sample that refers to the same material. Below a kilogram, the powder is normally split from a larger lot in a room with ordinary air. For a hygroscopic, light-sensitive phosphate that is the wrong operation: the split gains surface water, loses the original pack identity and produces a sample whose certificate belongs to a different container. The 1 kg pouch avoids the split, and it is the qualification unit for the production order that follows. ## Packs and formats Standard pyridoxal 5-phosphate packs | Pack | Net weight | Typical use | Handling | Foil pouch | 1 kg | Sample, qualification, pilot batch | Reseal after each withdrawal; keep cool, dry and dark | Fiber drum with liner | 25 kg | Production campaign | Keep the liner closed; record the opening date | Granulated powder | On request | Flow and dust control | Particle profile and bulk density change The catalog grade is an 80 mesh powder: at least 95% passes 80 mesh. A granulated grade is a different finishing specification, not a different packing unit, and it should be agreed before the quotation because it can move both the particle-size line and the lead time. The pack label should carry the product name, the hydrate form, the lot code, the net content, the storage statement and the retest date. An opened 1 kg pouch is not a dispensing pack. Each opening exposes the surface layer to light and moisture, and the remainder should be resealed and used within the period the stability data supports. The 25 kg drum is a production pack, not a storage silo; its liner is the moisture barrier, and the drum should stay off a damp floor. ## Lead time and dispatch The standard 80 mesh grade is quoted at 1–7 days from a released lot. That window covers release, packing and dispatch, not the shipping transit, customs clearance or the customer's own quality release. The clock starts when the specification, the order and the documents agree; a purchase order that says only “P5P” leaves the hydrate form, the assay basis and the pack open. Several things move the date: a granulated grade, a custom pack, a market-specific document set, or a test that is not on the standard certificate, such as phosphorus by ICP-OES. If the date is critical, state when the material has to arrive, not only when it has to be ordered, and say whether a partial shipment on the standard grade would help. The COA and the rest of the lot documents should travel with the pack, not follow it. ## What a quotation needs Six items make an offer specific enough to compare: - Product and form. Pyridoxal 5-phosphate, with the CAS number and the hydrate form written out. - Specification. Assay and its basis, loss on drying, pH, particle size, heavy metals and microbiology. - Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated grade. - Destination and Incoterm. Country of entry, delivery port or address, and the trade term. - Documents. Certificate of analysis, specification, SDS, and the market statements the importer requires. - Intended use and market. Whether the P5P goes into a supplement, a food or another application, and the country of sale. A quotation without the hydrate form and the assay basis is incomplete. The same powder can meet one specification and miss another, and the label entry depends on the form. Commercial terms are stated on the quotation, not on this page. ## The sample is a lot, not a demonstration The 1 kg pack is the qualification sample. Test identity by HPLC and UV, assay with its basis, loss on drying and pH before scaling, and keep a retained sample from the same pack. The lot code on the sample, the certificate and the quotation should match. A sample that cannot be traced to a lot is a demonstration. If a bench trial needs less than a kilogram, ask for the split in writing and keep its lot code with the trial results. A split is a repack: it has its own handling record and cannot be presented as the 1 kg foil pack. A bench sample and the drum that follows can carry different lot numbers even when both meet the same specification. ## Terms to settle before the first order The quotation and the quality agreement should show the commercial and quality terms on the same page: the Incoterm, the pack, the dispatch window, the revision of the specification, a certificate for every lot, the retained sample, the retest period and the change route. Agree them before the first production order; that conversation is harder once a dispute exists. Change notification matters for this material. A switch of manufacturing site, drying step, hydrate form or pouch laminate changes the water and light exposure, and the certificate alone will not show it. When a lot departs from the agreed specification, the evidence is the retained sample and a joint re-test by the named method; a photograph of the drum is not evidence. The agreement should name the laboratory both sides accept and say who pays for the referee. The catalog specification is on the product hub; release tests are set out on the COA page; market files are on the compliance page; shipping and documents are covered by the logistics page; the term itself is defined in the MOQ glossary entry. ### 05 The regulatory file for pyridoxal 5-phosphate URL: https://nutrition.rainwoodbio.com/products/vitamins/pyridoxal-5-phosphate/compliance/ Reviewed: 2026-11-20 Pyridoxal 5-phosphate is a vitamin B6 source, and the regulatory file is built around the exact form, the destination and the finished product. The catalog specification and the COA describe the material; they do not establish the route for a market. This page names the framework, the limits and the documents that belong in the file, and it leaves the route decision where it belongs: with the buyer's regulatory team. In one lineThe specification describes the material; the regulatory file has to show the entry, the limits and the label for the destination, and the buyer's team confirms the route. ## What the file has to answer Three questions sit under every market. What is the exact substance, and which entry names it? Do the contaminants meet the destination's limits on the product as sold? Does the label use the source name the entry gives, the right nutrient declaration and claim wording? A COA, a TDS and an SDS answer none of those on their own; they support the answer, and the file records it. The file should also show how the source, the hydrate form and the pack are kept under change control. A switch from the free acid to the monohydrate, or from one manufacturing site to another, changes the material behind the certificate even when the specification range is unchanged. ## European Union and the form entry Directive 2002/46/EC sets the framework for food supplements in the EU, and Annex II lists the vitamin forms. For vitamin B6, the current list has three entries: 9(a) pyridoxine hydrochloride, 9(b) pyridoxine 5′-phosphate and 9(c) pyridoxal 5′-phosphate. The 9(b) entry is a different phosphate ester; the 9(c) entry matches this material by name. Whether the monohydrate and the finished product fall within that entry for the destination is a question for the buyer's regulatory team, and the current consolidated text is the reference as of this review. The label has to name the source as the entry names it, so the ingredient list should say pyridoxal 5′-phosphate rather than “vitamin B6” or “P5P”. The nutrition declaration gives vitamin B6 in milligrams and as a percentage of the nutrient reference value, which is 1.4 mg under Regulation (EU) No 1169/2011. The EU has not harmonised maximum levels for vitamins in supplements; several member states set their own, so a multi-market product has to be checked market by market. Great Britain applies the Food Supplements (England) Regulations 2003, as amended and mirrored in the devolved nations, with its own retained lists; Northern Ireland follows the EU framework. The delivery address decides which file applies, and the decision should be recorded with the order. ## United States: a different route In the US, a dietary supplement is regulated under DSHEA, with current good manufacturing practice under 21 CFR 111 and the Supplement Facts panel under 21 CFR 101.36. The panel declares vitamin B6 in milligrams and as a percentage of the daily value, which is 1.7 mg, while the ingredient list names the form. The name used in the ingredient list is pyridoxal 5′-phosphate. There is no federal maximum level for lead, cadmium or mercury in dietary supplements. California's Proposition 65 sets a maximum allowable dose level of 0.5 µg per day for lead and requires a warning above it, and state rules or a customer specification can be tighter. The supplier's basis for the ingredient is recorded in the file; the buyer's regulatory team confirms that it extends to the finished product. ## Contaminants and the finished-product calculation The heavy-metal limits apply to the product as sold, not to the raw material in isolation. The table is the usual starting point for a food-supplement file; the destination text and the daily portion decide the final figure. Contaminant limits to confirm for the finished product | Contaminant | EU and UK | US | Lead (Pb) | 3.0 mg/kg in food supplements | No federal limit; California Prop 65 applies | Cadmium (Cd) | 1.0 mg/kg in food supplements | No federal limit | Mercury (Hg) | 0.10 mg/kg in food supplements | No federal limit | Arsenic (As) | No harmonised EU limit; national rules may apply | No federal limit The catalog sets Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg. The three EU figures sit at the regulatory maxima, so a lot released at the limit leaves no room for the rest of the formula. Do the arithmetic on the portion: at a 0.1 g portion, a raw material at 3.0 mg/kg lead contributes 0.3 µg of lead, before any other ingredient is counted. The file should carry that calculation and the method behind each result. ## Claims and the label boundary In the EU and the UK, nutrition and health claims are governed by Regulation (EC) No 1924/2006, and only claims on the authorised list may be used, with their conditions of use. A vitamin B6 claim belongs to the nutrient, not to the phosphate form, and the wording on the register is the only wording that can be used. Disease claims are not available for a food supplement. In the US, a structure/function statement needs substantiation and the DSHEA disclaimer, and a disease claim is not permitted. The raw material carries no claim of its own: the claim belongs to the finished product and to the nutrient. This page describes the material and makes no health claim. ## Documents for the file - Certificate of analysis with the lot code, the HPLC assay and its basis, loss on drying, pH, identity and the heavy-metal and microbiological results. - Specification and technical data sheet naming the hydrate form, the CAS number, the assay basis and the 80 mesh grade. - Safety data sheet in the current format, with the dust, light and moisture precautions. - Allergen, GMO, irradiation and residual-solvent statements for the lot. - Origin and process flow chart, including the drying and milling steps that affect water and particle size. - Food-contact declaration for the pouch and the drum liner. - The destination route and label review, held by the buyer's regulatory team. The product hub carries the catalog specification; the COA page shows where each result sits; the identity page covers the analytical evidence; the vitamin B6 product page shows the hydrochloride file for comparison; the quality page describes the release workflow. ## Checklist before the first order - The form, the hydrate and the CAS number are named in the specification. - The EU entry and the US ingredient name have been checked against the current text. - The label source name matches the entry for the destination. - The assay basis and the loss on drying are printed on the certificate. - The contaminant results are converted to the finished-product portion. - The claim wording comes from the authorised list or the notification, with its condition of use. - COA, TDS, SDS, allergen, GMO, origin and food-contact documents are on file. - Source, hydrate form and pack are under change control. - The quotation, specification and certificate refer to the same revision. ### 06 How to prove a pyridoxal 5-phosphate lot is P5P URL: https://nutrition.rainwoodbio.com/products/vitamins/pyridoxal-5-phosphate/identity/ Reviewed: 2026-11-20 A pyridoxal 5-phosphate lot is P5P when four lines agree: the document names the form and CAS number, HPLC retention and UV spectrum match the reference, the phosphorus figure is close to the theoretical value for the hydrate, and the water and assay close the mass balance. The assay alone cannot separate P5P from pyridoxine hydrochloride, from pyridoxal or from a dilution. The phosphate and the water are the direct checks. In one lineIdentity is four agreeing measurements: the document, the HPLC/UV record, the phosphorus figure and the water balance. ## The four identity layers Each layer answers a different question, and none of them covers the others. A supplier who answers only the first has described the paperwork, not the powder. Four layers of pyridoxal 5-phosphate identity | Layer | Question | Test | What it proves | Document | Is the form named? | Name, CAS number, hydrate form | Paperwork only | Chromatography | Is the molecule P5P? | HPLC retention, UV spectrum, peak purity | The molecule, not the hydrate | Phosphate | Is the phosphate present, one per molecule? | Phosphorus by ICP-OES | The phosphate ester | Mass balance | Is it diluted or partly hydrolysed? | Assay, loss on drying, related substances | Consistency of the numbers ## HPLC and UV: proving the molecule The HPLC method should name the column, the mobile phase, the wavelength and the standard, and it should resolve P5P from pyridoxal, pyridoxine and pyridoxamine. Identity is retention time plus spectrum. A single peak at the expected time can be a different B6 compound or a degraded standard, so the spectrum is the second dimension rather than a decoration. The UV spectrum has a condition that many certificates omit: it depends on pH. The absorption maximum sits near 295–299 nm in acidic solution and moves to about 388–390 nm above pH 4; the solution is colourless in acid and yellow as the pH rises. A sample prepared in water at pH 3 and a sample prepared at pH 6 do not give the same spectrum. The method has to fix the diluent and its pH, and a certificate should report the maxima or the ratios it compared, not only “UV conforms”. ## The phosphorus ratio: proving the phosphate P5P has one phosphorus atom per molecule. On the anhydrous free acid (247.14 g/mol) the theoretical phosphorus content is 30.974 ÷ 247.14 = 12.53%. On the monohydrate (265.16 g/mol) it is 11.68%, because the water adds mass without adding phosphorus. A phosphorus result close to one of those figures, read with the loss on drying, is consistent with a P5P lot. A low figure points to dilution or to a B6 form without phosphate; a high figure points to added inorganic phosphate or a different salt. The vitamin B6 equivalent is the other side of the same ratio: 68.5% for the free acid, 63.8% for the monohydrate and 82.3% for the hydrochloride. A powder that reports a high “vitamin B6” content with no phosphorus is not P5P. The phosphorus and the vitamin B6 figures should tell the same story as the assay and the water. Chloride is a useful negative check. The catalog specification has no chloride line, and P5P contains no chloride. A chloride result near 17% would point to pyridoxine hydrochloride, while a low result does not prove P5P on its own. Read it with the HPLC retention time and the phosphorus figure. ## X-ray diffraction: the solid-state check X-ray diffraction answers a different question: is the solid crystalline, and does its pattern match a reference? It can distinguish the monohydrate from an anhydrous or amorphous solid, and it can compare lots from two sources. It is not a purity assay, and it does not measure the phosphate or the water directly. Ask for the reference pattern and the detection limit before reading a “match” statement. For a disputed lot, XRD plus phosphorus plus HPLC/UV is stronger than any one of them. XRD is not a routine release test for this product, and a certificate that reports only “XRD conforms” without the pattern has added little. The method is most useful when the question is the solid form rather than the assay. ## What adulteration looks like Common pyridoxal 5-phosphate substitutions and the signals | Adulterant | What it does | Signal | Test | Pyridoxine hydrochloride | Common B6 source; no phosphate | Chloride high; phosphorus low; different retention | Chloride, phosphorus, HPLC | Pyridoxal | Hydrolysis product; no phosphate | Extra HPLC peak; phosphorus low | HPLC/UV, phosphorus | Pyridoxamine | Different B6 form | Different retention and spectrum | HPLC/UV | Inorganic phosphate | Raises phosphorus without P5P | Phosphorus high against assay | Phosphorus, HPLC | Diluent | Lowers assay and phosphorus together | Assay low; water or ash high | Mass balance | Water | Raises loss on drying; lowers as-is assay | LOD high; dried-basis assay normal | Loss on drying Colour is the weakest signal. The powder is white to off-white, and the solution colour depends on pH, so a yellow solution is not evidence of degradation by itself. The stronger signals are the phosphorus figure, the UV spectrum run at a fixed pH, and the mass balance. ## How to write the identity into the specification - “Pyridoxal 5-phosphate monohydrate, CAS 41468-25-1”, or the free acid, CAS 54-47-7, with the hydrate form named. - “Assay 98.0–101.0% by HPLC, with the basis stated.” - “Loss on drying ≤8.0%, reported on every lot.” - “Identification by HPLC retention and UV spectrum, with the diluent pH fixed.” - “Phosphorus about 11.7% for the monohydrate or 12.5% for the free acid, by ICP-OES, where the form is to be confirmed.” - “No pyridoxine hydrochloride, pyridoxal or other B6 form above the stated limit.” - “Particle size ≥95% through 80 mesh; destination market confirmed before the order.” ## Five questions for the supplier - Which hydrate form is this lot, and which CAS number is on the certificate? - Can you send the HPLC chromatogram and the UV spectrum, with the diluent and its pH? - What is the phosphorus result by ICP-OES, and what method was used? - What is the loss on drying, and is the assay calculated as-is or on the dried solid? - Is any pyridoxine hydrochloride, pyridoxal or other B6 form present, and will you accept a joint re-test on the retained sample? Five direct answers amount to an identity file. A single assay percentage does not. The product hub carries the catalog specification; the COA page shows where each figure sits; the grades page compares the hydrate forms; the level-four comparison covers the hydrochloride; the HPLC method note explains the separation; the quality page describes the release workflow. ### 01 What the COA for retinol oil actually contains URL: https://nutrition.rainwoodbio.com/products/vitamins/retinol/coa/ Reviewed: 2026-11-20 The certificate for a retinol lot reports appearance, identification by HPLC with UV detection, assay as retinol, peroxide value, heavy metals and microbiology. Each line needs its method and its release limit, and the measured result belongs in a column of its own. The limits below are the catalog specification; the batch COA is the document that releases a particular bottle. In one lineAn oil needs two gates on the certificate: the assay says how much retinol is present, and the peroxide value says how much oxidation the oil has already taken up. ## The certificate as a test report A certificate is only as useful as its least specific line. Every line should answer three questions: the quantity measured, the method that produced it, and the limit the lot was released against. A row that reads only “conforms” asks the reader to accept a conclusion with nothing behind it. The two rows that decide the material are the identity row and the assay row. Retention time plus UV spectrum says the peak is retinol rather than another retinoid; the assay says how much is present. The third decisive row is the peroxide value: an oil can pass its assay while already carrying oxidation. Identity, assay, oxidation and contaminants · retinol oil | Parameter | Method | Release limit | Appearance | Visual | Yellow to amber, clear to slightly viscous oil | Identification | HPLC retention and UV spectrum | Conforms to the retinol reference | Assay (as-is) | HPLC with UV detection | ≥95.0% | Peroxide value | Titrimetric | ≤10.0 meq O₂/kg | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent ## The as-is basis, the standard and the IU arithmetic The assay is reported on the material as supplied. That sounds trivial until a buyer compares two certificates written on different bases. The catalog sets no loss on drying for this oil, so there is no dry-matter divisor to apply: 95.0% means 95.0% of the oil in the bottle. A “dry basis” result for an oil should be questioned: ask what was dried and how. The certificate should name the standard and the wavelength. The assay is calculated against a retinol reference of declared purity, read in the ultraviolet near 325 nm. A result that does not name the reference leaves the reader unable to tell whether the standard was retinol or an ester. The same bottle can be described as a percentage or as IU/g, and the two figures are arithmetically linked. One microgram of all-trans-retinol is defined as 3.33 IU, so 95.0% retinol is 950,000 µg/g and about 3.16 million IU/g. That IU figure is calculated from the chromatogram, not measured a second time. A certificate quoting only IU/g has hidden the percentage and the conversion, and the buyer cannot check either. ## The limit and the measured value The release limit is the boundary for the lot; the batch result is what the laboratory measured. The two belong side by side, with the method named in the same row. A result column that repeats the release limit has measured nothing. What the result column should contain | Parameter | Release limit | Result column | Assay | ≥95.0% as-is | A measured percentage, with the reference and the wavelength | Peroxide value | ≤10.0 meq O₂/kg | A measured figure, with the test date | Heavy metals | Per element | A figure in mg/kg for each element, not a total | Microbiology | Counts and absence | The count and the absence statement for the lot | Appearance | Yellow to amber oil | The observed description for the lot “Passes specification” is a conclusion, and the reader should be able to reach it from the numbers. For heavy metals the evidence is a figure per element; a single summed figure has hidden the element that matters. For microbiology the evidence is a colony count together with a statement of absence. For the peroxide value it is a number and its date, because the value climbs in storage. ## What moves between batches The peroxide value is the most variable line on this certificate. A lot released quickly can sit far below the 10.0 limit; a lot held warm, or packed with a large headspace, can arrive close to it. A value of 9.0 passes the gate and still leaves almost no margin for a year in a warm warehouse, so read the number and the date together rather than the pass alone. Isomer content moves with heat, light and processing time. All-trans-retinol is the form the label assumes; light and heat push part of it towards cis isomers, which show a shifted and weaker ultraviolet band. The catalog does not set an isomer limit, so the chromatogram is where the shift becomes visible. Colour moves from pale yellow to amber across the same window, and a darker oil is a hint rather than a failure. The assay can drift with the reference standard and with the dilution used to reach the detector's linear range. A trend across lots — assay sliding low, peroxide value climbing, a new shoulder in the spectrum — says more than one result at the edge of its limit. ## When to order an outside test Order an independent test for a new source, a first shipment, a disputed result, or a form claim the certificate does not prove. The panel does not need to repeat the whole certificate. A useful one combines HPLC with diode-array detection for identity and assay, peroxide value by titration, the isomer profile from the same chromatogram, and a direct method that resolves retinol from the retinyl esters. Add ICP-MS for the metal panel, an antioxidant identification and assay if the oil is stabilised, and a residual-solvent screen if a solvent-borne dilution is suspected. Ask for the detection limit behind every screen the laboratory reports. Without a limit, “not detected” describes the method's sensitivity rather than the oil. Chain of custody matters. The portion tested should be the portion retained, and the report should carry the lot code. When a result is contested, give the referee the retained sample and the specification, and ask for tests that separate the forms rather than a repeat assay. ## What to compare between suppliers Six lines make two quotations comparable: form and CAS number; assay as-is and the IU/g derived from it; the isomer profile; the peroxide value with its date; the declared antioxidant; and the pack with its headspace. Two offers that agree on assay but differ on antioxidant or pack are not offering the same shelf life. The catalog specification sits on the retinol product page. The tests that separate the free alcohol from an ester are on the identity page; the market conditions are on the compliance page; the ester products are described on the vitamin A page; the chromatographic method is outlined in the analytical methods library; and the release workflow is on the quality page. ### 02 Retinol or a retinyl ester: choosing a vitamin A grade URL: https://nutrition.rainwoodbio.com/products/vitamins/retinol/grades/ Reviewed: 2026-11-20 Retinol is the free alcohol of vitamin A; retinyl palmitate and retinyl acetate are esters of that alcohol with a fatty acid. The catalog form here is a ≥95.0% oil, while the two esters are sold as spray-dried powders at 1.0–1.1 MIU/g and 500,000 IU/g. The choice changes the potency per gram, the physical form, the oxidation behaviour and the ingredient name on the label. In one lineThe grade decision is not a potency step: the free alcohol and the esters are different materials with different stability, physical form and label names. ## Why the form is the first line of the specification A specification that says “vitamin A” and stops there has not identified a material. Three commercial products answer to that name, and they differ in molecular mass, in stability and in the word that must appear on the label. Retinol is the parent alcohol; esterification attaches palmitic or acetic acid to the hydroxyl group, which raises the molecular mass and lowers the vitamin A content per gram. The ester is not a diluted retinol but a different molecule with its own CAS number and its own certificate. The free alcohol is the form the IU arithmetic is written around: one microgram of all-trans-retinol is 3.33 IU. The esters are converted back to retinol for that calculation, which is why an ester certificate can quote a retinol equivalent as well as its own mass. The conversion is chemistry, not a marketing allowance. ## The three materials side by side Retinol and the two retinyl esters · identity and potency | Property | Retinol | Retinyl palmitate | Retinyl acetate | CAS | 68-26-8 | 79-81-2 | 127-47-9 | Formula and mass | C20H30O · 286.45 g/mol | C36H60O2 · 524.86 g/mol | C22H32O2 · 328.49 g/mol | Retinol per gram of pure material | 1,000 mg | About 546 mg | About 872 mg | Pure material potency | About 3.33 million IU/g | About 1.82 million IU/g | About 2.90 million IU/g | Catalog presentation here | ≥95.0% oil | 1.0–1.1 MIU/g powder | 500,000 IU/g powder | Behaviour in air | The most readily oxidised of the three | More resistant, but hydrolyses to retinol | More resistant, but hydrolyses to retinol | Label name | Retinol | Retinyl palmitate | Retinyl acetate The potency column explains why a gram-for-gram swap fails. One gram of the 95% oil carries about 3.16 million IU; one gram of the 1.0 MIU/g palmitate powder carries one million IU. Replacing one with the other at the same weight changes the dose by a factor of about three. ## Oil phase against powder Retinol is insoluble in water and soluble in fats and organic solvents, so it belongs in the oil phase: a softgel fill, an oil blend, or the dispersed phase of an emulsion. It is weighed as an oil, protected from light while the batch is open, and kept under nitrogen where the process allows. The catalog appearance is a yellow to amber, clear to slightly viscous oil, and the colour deepens as the material ages. The ester powders work the other way. A spray-dried palmitate or acetate is a light yellow powder that disperses in warm water, flows in a blender and can be compressed into a tablet. It is weighed as a solid, blended with the other powders and packed in a foil pouch. The two presentations do not share a weighing room, a dosing line or a stability file. Between the two extremes sit the formulated options: an oil dilution of retinol in a carrier oil, and a retinol powder on a carrier, which the catalog lists on request. Each of those is a new specification with a declared carrier, not a packing variant of the oil. ## Dose arithmetic and the label At ≥95.0% assay, one gram of oil contains 950 mg of retinol, which is 950,000 µg and about 3.16 million IU. A 500 µg retinol-equivalent dose therefore weighs about 0.53 mg of oil. No softgel line weighs half a milligram per capsule, so the oil is diluted into a carrier oil and the dilution is specified and declared. The same arithmetic in reverse tells a buyer what a dilution must contain to deliver the label dose. The ester powders run at lower potency density. One gram of the 1.0 MIU/g palmitate powder carries 300,000 µg of retinol equivalent, so a 500 µg dose weighs about 1.67 mg of powder. That is why the powders are blended into a tablet granulation or a capsule fill rather than weighed one dose at a time. Keep the label units straight. The EU declares vitamin A in µg RE, with one microgram of retinol equal to one microgram RE. The US declares µg RAE on the same 1:1 basis for preformed retinol. Older labels and some export markets still use IU, where one IU of retinol is 0.3 µg. A label that mixes IU and µg without the conversion is a labelling error waiting for a reviewer. ## What to write into the specification - “Retinol, CAS 68-26-8, C20H30O, all-trans-retinol oil.” - “Assay ≥95.0% as-is by HPLC with UV detection; report the IU/g conversion.” - “Peroxide value ≤10.0 meq O₂/kg, with the test date.” - “Declared antioxidant and carrier, if either is present.” - “Amber bottle, nitrogen headspace, storage condition and retest period.” - “Destination market and label unit confirmed before the order.” ## When the ester is the better purchase Choose an ester when the dosage form is a tablet, a dry blend, a stick pack or a water-dispersible powder, and when the process applies heat that an oil would not survive. Choose the retinol oil when the formula is a softgel or an oil blend, when the label names retinol, and when the dose is small enough that a high-potency oil keeps the fill weight sensible. A switch in either direction is a new specification, a new certificate and a new label. The stability file from one material does not carry to the other, because the degradation route changes with the form: the free alcohol oxidises directly, while an ester first hydrolyses and then exposes retinol. The catalog specification sits on the retinol product page; the ester grades are on the vitamin A page; the detailed comparison is on the free alcohol versus ester page; the release tests are on the COA page; the handling conditions are on the stability page; and the identity checks are on the identity page. ### 02.1 Retinol vs retinyl esters: the free alcohol and the ester URL: https://nutrition.rainwoodbio.com/products/vitamins/retinol/grades/retinol-vs-retinyl-esters/ Reviewed: 2026-11-20 Retinol is vitamin A as the free alcohol; retinyl palmitate and retinyl acetate are the same alcohol with a fatty acid attached to its hydroxyl group. The ester bond adds mass without adding vitamin A activity: pure retinol is 286.45 g/mol and about 3.33 million IU/g, while pure retinyl palmitate is 524.86 g/mol and about 1.82 million IU/g. The free alcohol is more potent and more oxidation-prone, and that decides the dosage form, the pack and the label. In one lineThe ester is a different molecule, not a diluted retinol: it changes the mass per IU, the oxidation route and the name that has to appear on the label. ## The hydroxyl group is the whole difference All-trans-retinol has a primary hydroxyl at the end of its polyene chain. Esterification replaces the hydrogen of that hydroxyl with an acyl group: acetic acid gives retinyl acetate, palmitic acid gives retinyl palmitate. The conjugated ring and chain that produce the colour and the ultraviolet absorption are unchanged, which is why the two materials look similar and read at the same wavelength. What the ester bond changes | Material | Acid attached | Molecular mass | Retinol per gram | Degradation route | Retinol | None | 286.45 g/mol | 1,000 mg | Direct oxidation of the alcohol | Retinyl acetate | Acetic acid | 328.49 g/mol | About 872 mg | Hydrolysis, then oxidation of the free retinol | Retinyl palmitate | Palmitic acid | 524.86 g/mol | About 546 mg | Hydrolysis, then oxidation of the free retinol A milligram of palmitate delivers about half a milligram of retinol, so a formula built on retinol cannot be switched at the same weight; the factor is fixed by the molecular masses, not by a lot's assay. ## Potency per gram and per dose The IU figure follows the retinol content. One microgram of all-trans-retinol is defined as 3.33 IU, so pure retinol is about 3.33 million IU/g, pure retinyl acetate about 2.90 million IU/g and pure retinyl palmitate about 1.82 million IU/g. The catalog products are diluted from those figures: the ≥95.0% retinol oil carries about 3.16 million IU/g, the 1.0–1.1 MIU/g palmitate powder carries about one million IU/g, and the 500,000 IU/g acetate powder carries half of that. At the dose end the arithmetic reverses. A 500 µg retinol-equivalent dose needs about 0.53 mg of the 95% oil, about 1.67 mg of the 1.0 MIU/g palmitate powder, or about 3.33 mg of the 500,000 IU/g acetate powder. Those weights explain the commercial formats: an oil this potent is diluted into a carrier before it reaches a softgel line, while the powders are blended into a granulation or a capsule fill. Potency density also sets the fill weight: a high-potency oil keeps a softgel small; a low-potency powder needs more mass per dose. ## Two different failure routes Free retinol oxidises directly. The polyene chain reacts with oxygen, the colour fades towards pale yellow, the peroxide value climbs and the all-trans band in the ultraviolet weakens as cis isomers form. Light and heat accelerate all three, and trace metals catalyse the oxidation. There is no hydrolysis step to slow it down, which is why a retinol oil is the more fragile raw material in an open bottle. An ester is more resistant to oxidation in the dry state because the hydroxyl that would react first is blocked. That advantage is conditional. Water and acid hydrolyse the ester back to retinol and the fatty acid, and the released retinol then oxidises in the same way as the free alcohol. A palmitate powder in a dry blend is well protected; an acetate ester in a low-pH beverage is not automatically safer than retinol, because the matrix supplies the water and the acid for the hydrolysis. The pack follows the same split. The oil needs an amber bottle with a small headspace, a tight closure and nitrogen where the process allows. The powder needs a foil pouch against moisture and light, and a closure that stays sealed between uses. Neither pack fixes the other's failure mode. ## Handling in the plant The oil is handled in the oil phase: weighed into the carrier, warmed only as far as the process needs, and kept covered while the batch is open. Retinol is insoluble in water, so it cannot be added to an aqueous phase directly; it goes into the oil phase of an emulsion, or into the fill of a softgel. Equipment contact with iron or copper should be avoided, and the working area should be lit only as brightly as the task requires. The ester powders are handled in the dry phase: blended with the other powders, screened if the specification calls for it, and packed in foil. They pick up moisture when a pouch is left open, and a damp powder can hydrolyse in storage. The two materials should not share a scoop, a sieve or a weighing boat without a clean-down, because a few grams of ester in a retinol lot is an identity failure, not a rounding error. ## What the label has to say The ingredient declaration names the form that was weighed. “Retinol”, “retinyl palmitate” and “retinyl acetate” are three different declarations, and a label written for one is not correct for another. The quantity is declared in the unit the market requires: µg RE in the EU, µg RAE in the US, and IU in some export markets, where one IU of retinol is 0.3 µg. The units are linked, and the label arithmetic has to show it. For preformed retinol, one microgram of retinol is one microgram RE and one microgram RAE, so the conversion from IU is a single factor. A 500,000 IU/g acetate powder contains 150 mg of retinol equivalent per gram, or 15% by mass; the rest is the acetate's fatty-acid mass plus carrier, moisture and minor solids. A label that declares 500,000 IU/g as if it were retinol mass has confused the activity unit with the weight. The finished product also has to respect the destination's ceiling for preformed vitamin A: the EU and the US both work from a tolerable upper intake level of 3,000 µg RE or RAE per day for adults as of this review. The dose calculation is the brand's, and it belongs in the regulatory file rather than on this page. ## When to choose which Choose retinol when the dosage form is a softgel or an oil blend, when the label names retinol, and when a high-potency oil keeps the fill weight manageable. Choose an ester when the form is a tablet, a dry blend, a stick pack or a water-dispersible powder, and when the process heat would be too much for an oil. It is also the practical choice when the market file and label already describe it. A switch is a new specification, a new certificate, a new stability file and a new label; it is not a line change at the weighing station. The retinol product page carries the oil specification; the grades page places this comparison in the wider range; the vitamin A page covers the ester powders; the stability page sets out the storage conditions; the identity page gives the tests that separate the forms; and the compliance page covers the market files. ### 03 Retinol stability: light, oxygen and the pack URL: https://nutrition.rainwoodbio.com/products/vitamins/retinol/stability/ Reviewed: 2026-11-20 Retinol is the vitamin A form that oxidises most readily. It is supplied as an oil in an amber bottle, and its shelf life depends on the light, the oxygen in the headspace and the antioxidant package far more than on the warehouse thermometer. The peroxide value on the certificate is a release gate at ≤10.0 meq O₂/kg; it is not an allowance for storage. In one lineRetinol fails by oxidation and by light, so the bottle, the headspace and the antioxidant package set the shelf life before the storage temperature does. ## The neat oil: oxygen, light and the closure For a powder, “dry” means keeping moisture out. For this product the neat oil is already anhydrous, and the enemy is oxygen. Every time the bottle is opened, the headspace exchanges with room air and the oil meets a fresh supply of oxygen. A half-empty bottle therefore ages faster than a full one, which is why small packs and a nitrogen blanket matter more than a long expiry date on the label. Light drives a second reaction. Retinol absorbs in the ultraviolet near 325 nm, and the amber glass removes most of the damaging wavelengths but not all of them. A bottle left on a windowsill, or decanted into a clear container for a bench trial, is an exposure. Work under subdued light and return the bottle to the dark as soon as the portion has been weighed. Heat raises the rate of both reactions without changing their direction. A cool, dark store slows the peroxide climb; a warm loading bay, a car boot or a glass-fronted cabinet does the opposite. The exact storage band belongs in the specification, and the bottle should be allowed to reach room temperature before opening after cold storage, so that condensation does not form on the oil. ## The oil dilution and the emulsion Retinol does not dissolve in water, so “solution” here means the oil phase: a dilution in a carrier oil, a softgel fill, or the dispersed oil droplets of an emulsion. In a dilution, the carrier oil is part of the stability story. A carrier that arrives with its own peroxide load consumes the antioxidant and takes the retinol with it, so the carrier's specification matters as much as the vitamin's. An emulsion adds an interface. Retinol sits at the oil-water boundary, where dissolved oxygen and trace metals from the water or the equipment meet it. A low pH accelerates isomerisation, and the all-trans band weakens as cis isomers form. Homogenisation adds heat and air unless the process is run under vacuum or nitrogen. None of those effects can be read from a bulk-oil stability file; the matrix has to be tested as it is sold. ## What drives degradation Factors that move retinol during storage | Factor | What it does | Control | Light | Isomerisation and loss; the 325 nm band weakens | Amber glass; dark store; subdued working light | Oxygen | Peroxidation and bleaching of colour | Small headspace; nitrogen; tight closure | Heat | Raises the rate of oxidation and isomerisation | Cool store; cool process; short hold times | Trace metals | Iron and copper catalyse oxidation | Stainless equipment; avoid metal contact in the oil phase | Acid | Isomerisation and loss in low-pH emulsions | Keep retinol out of the acid phase; test the matrix | Carrier peroxides | Consume the antioxidant and oxidise the retinol | Specify the carrier oil; check its peroxide value | Antioxidant depletion | Removes the protection before the retinol is gone | Declare the antioxidant; measure it at intervals These factors combine. A warm, bright bottle with a large headspace is worse than three separate effects added together, and a low-pH emulsion in clear glass combines all of them. The useful question is not whether retinol is stable, but stable in which pack, in which matrix, for how long. ## A stability protocol for the ingredient A protocol that can be defended names the pack, the condition, the time points and the tests. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% relative humidity cover the warehouse; accelerated storage at 40 °C/75% relative humidity stresses the closure. A photostability arm, following the standard ICH Q1B design, covers the failure mode a dark incubator misses. Test assay, peroxide value, the isomer profile, appearance and the antioxidant level at each point. A sample that keeps its assay while its peroxide value doubles has still changed, and a sample whose assay holds while the all-trans band narrows has lost potency the percentage does not show. Report the individual results and the pack, not a single pass statement. Run the study on the pack that will be sold. A 5 kg amber bottle and a 1 kg amber bottle have different headspace-to-oil ratios and different opening histories, so a result from one does not automatically describe the other. ## The finished formula changes the answer A softgel fill is a dilution of the oil in a carrier, stabilised with an antioxidant and sealed inside a shell that is itself permeable to oxygen and water. The shell's glycerol and water can migrate into the fill, and the fill's oil can migrate into the shell; both change the dose and the stability. Test the finished softgel, not only the bulk oil. An emulsion or a fortified oil faces the interface and pH questions above. A retinol powder on a carrier moves the failure mode back towards surface oxidation and moisture, so the powder's own stability file is needed. In every case the overage, if any, is a label and stability decision made by the brand; it does not repair a pack that lets oxygen in. ## How the shelf life is set We do not publish one shelf-life number for retinol, because the pack and the storage condition set it. Whatever retest period is assigned appears on the specification, backed by data for that pack. A figure without a pack, a condition and a test panel is a claim rather than a shelf life. After the retest period, re-assay the retained sample before extending use, and check the peroxide value at the same time. Do not carry a bulk figure across to a repacked bottle, and the in-use period after opening is not an extension of the sealed shelf life. The product page lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the grades page sets the oil against the ester powders; the HPLC note describes the assay; and the quality page describes the release workflow. ### 04 Retinol: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/vitamins/retinol/moq/ Reviewed: 2026-11-20 The MOQ for retinol is 1 kg, supplied in a 1 kg amber bottle; the next standard pack is a 5 kg amber bottle, and the lead time is 1–7 days from order confirmation. A firm quotation needs six details: form and CAS number, assay and IU conversion, quantity and pack, destination and Incoterm, documents, and the intended market. In one lineThe 1 kg amber bottle is the smallest order because it is the smallest pack that can be filled, sealed and traced as one lot. ## Why the minimum is 1 kg One kilogram of a 95% oil carries 950 g of retinol, which is about 1.9 million doses at 500 µg. The minimum is therefore not set by the dose count; it is set by the pack. A kilogram is the smallest amber bottle that can be filled from a bulk lot, closed under nitrogen, labelled with a lot code and sampled without opening the production stock. A smaller quantity would be a repack from that bottle, with a second handling record and no better traceability. The pack size is a handling unit that keeps the headspace manageable, not a commercial threshold. A buyer who needs a few grams for a bench trial is asking for a split, not for a smaller catalogue product, and the split should be documented as such. ## Packs and formats Standard retinol packs | Pack | Net weight | Typical use | Notes | Amber glass bottle | 1 kg | Trial, sample, small batch | Light barrier; nitrogen headspace; tight closure | Amber glass bottle | 5 kg | Production | Larger headspace once opened; split into smaller bottles | Oil dilution | On request | Lower potency per gram | Carrier oil and IU/g become part of the specification | Powder on carrier | On request | Dry blends | Carrier, mesh and handling are new specification lines The catalog form is a ≥95.0% oil. A dilution in a carrier oil is a different specification, not a packing choice: it changes the IU/g, the peroxide value, the antioxidant declaration and the label. Say so before the quotation, because the dilution moves the lead time as well. ## From confirmation to dispatch A standard pack is dispatched within 1–7 days of confirmation. That window covers picking, nitrogen flushing, document preparation and dispatch; it does not include transit, customs clearance or the customer's own quality release. A custom dilution, a powder on carrier or a non-standard bottle is quoted with its own window. Ask for the dispatch date, not only the 1–7 day range. The 1 kg bottle usually moves as a parcel and the 5 kg bottle on a pallet, and the Incoterm decides who books the freight and who clears entry. The COA, the specification and the SDS should travel with the pack, not follow it by email after arrival. ## What a quotation needs Six items make an offer firm enough to compare: - Product and form. Retinol, CAS 68-26-8, all-trans-retinol oil, not “vitamin A”. - Specification. Assay as-is, the IU/g conversion, peroxide value, heavy metals and microbiology. - Quantity and pack. 1 kg or 5 kg amber bottle, or a dilution or carrier powder. - Destination and Incoterm. Destination country, the port or delivery address, and the Incoterm. - Documents. COA, TDS, SDS, antioxidant declaration and any market statement the importer needs. - Intended use and market. Softgel, oil blend or another use, and where the finished product will be sold. An offer that omits the market or the pack is incomplete. The same oil can suit one destination and fall outside the file for another, and the paperwork is part of the offer. We state commercial terms on the quotation rather than here. ## A sample with a lot code Qualification starts with the 1 kg bottle. Test identity by HPLC with UV detection, assay, peroxide value and microbiology before scaling, and keep a retained portion from the same bottle. The lot code on the sample, the COA and the quotation should match, and the retained sample should stay in the dark at the agreed storage condition. A bench trial that needs a few grams is a split from a lot, not the catalogue bottle. It leaves the bulk pack, gets its own handling record and should not be presented as the 1 kg pack. Ask for the split in writing and keep its lot code with the trial results, because the oil on the bench and the oil in the production bottle may come from different lots even when the specification is identical. ## Terms to settle before the first order The quotation and the quality agreement should sit on the same page: Incoterm, bottle size, dispatch window, specification revision, a COA per lot, the retained sample, the retest period, the in-use period after opening, and the change-control route for the antioxidant, the carrier or the pack. Agree them before the first production order, because the same conversation is harder once a dispute exists. A lot that misses the agreed specification is handled through the retained sample and a joint re-test against the named method, not a photograph of the bottle. Name the referee laboratory and who pays for it in advance. A return decided on colour alone is difficult to defend, because a yellow-to-amber window covers a wide range of normal oil. The product page carries the catalog specification; the COA page lists the release tests; the stability page covers the pack and the storage condition; the compliance page covers the market files; the MOQ glossary entry defines the term; and the logistics page covers shipping and documents. ### 05 The regulatory file for retinol URL: https://nutrition.rainwoodbio.com/products/vitamins/retinol/compliance/ Reviewed: 2026-11-20 Retinol is the preformed vitamin A alcohol, CAS 68-26-8, supplied here as a ≥95.0% oil. The regulatory file is built around that exact form, the destination and the finished-product dose. The buyer's regulatory team confirms the route for the market; this page lists the framework, the limits and the documents that the file has to hold. In one lineThe certificate proves the oil; the regulatory file proves the route, the dose ceiling and the label that the destination will accept. ## What the file contains Four things belong in the file at once: the specification version for the retinol oil, the certificate that released the lot, the limits and labelling rules for the finished product in the destination, and the record of how source, antioxidant and pack changes are controlled. The COA reports the lot, the specification states the release limits and the safety data sheet covers handling. None of those three settles the market route, which is recorded separately. The form is part of the file. A file opened for retinol does not cover retinyl palmitate or retinyl acetate; those are different ingredients with their own names, CAS numbers and declarations. When a formula changes form, the regulatory file is reopened, not amended in a footnote. ## European Union In the EU, the framework is Regulation (EC) No 1925/2006 on the addition of vitamins and minerals to foods and Directive 2002/46/EC on food supplements, read with the labelling Regulation (EU) No 1169/2011. Vitamin A has a nutrient reference value of 800 µg RE, and the label declares the amount per portion against that value. Maximum levels for vitamin A in food supplements are not harmonised across the Union: several member states set their own ceiling, so the destination decides the number. The buyer's regulatory team confirms that the retinol oil, the carrier and the proposed daily dose fit that member state's rule as of this review; the consolidated texts, not a summary, are the reference. The safety benchmark that most member states work from is the tolerable upper intake level for preformed vitamin A, 3,000 µg RE per day for adults, set by the Scientific Committee on Food in 2006. That figure applies to retinol and its esters together, not to beta-carotene. ## United States In the US, a vitamin A ingredient is used under the dietary supplement framework of the Federal Food, Drug, and Cosmetic Act as amended by DSHEA. The Supplement Facts panel declares vitamin A in µg RAE, with a daily value of 900 µg RAE; for preformed retinol, one microgram of retinol is one microgram RAE, and one IU is 0.3 µg RAE. The upper level used for adults is 3,000 µg RAE per day of preformed vitamin A, from the Institute of Medicine's 2001 report. How the ingredient is positioned, and whether the intended use and dose fit that position, is confirmed by the buyer's regulatory team. Structure/function language is reviewed on its own, with substantiation and the DSHEA disclaimer; no disease claim is open in this market. Neither the certificate nor the specification is a label review. ## Limits to confirm for the finished product The contaminant panel is a finished-product calculation. The dose matters: at 500 µg RE, a softgel carries about 0.53 mg of the 95% oil, so the trace-metal contribution of the ingredient is negligible against any supplement limit. The binding limit for this ingredient is the vitamin A dose itself. Limits to confirm for a retinol supplement | Parameter | Typical supplement reference | What the file should show | Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method, limit and the finished-product calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception that applies | Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result and method | Arsenic (As) | Customer or market limit | The agreed limit and the method, stated on the certificate | Vitamin A from retinol | 3,000 µg RE or RAE per day for adults | The daily dose calculation, including any overage The references in the table are starting points. The current destination text and the recommended daily portion decide the final figure, and the calculation should be redone when the dose or the overage changes. ## Claims and the label In the EU, health claims are governed by Regulation (EC) No 1924/2006 and its authorised-claims register. Vitamin A has authorised wording, for example “Vitamin A contributes to the maintenance of normal vision”, available only when the food contains a significant amount, defined for supplements as 15% of the nutrient reference value per daily portion. The claim must match the form and the dose that the label declares; the finished product's reviewer confirms the wording and the conditions. In the US, a structure/function statement needs substantiation and the DSHEA disclaimer, and it must not cross into a disease claim. Mechanism language about vision or cell differentiation is not an authorisation. This site publishes the specification and makes no health claim for the ingredient or for a finished product. The label also has to name the form. “Vitamin A” on a supplement panel is not the same declaration as “retinol”, “retinyl palmitate” or “retinyl acetate”, and a label written for one cannot be used for another. ## Documents for the file The lot folder needs the COA with the assay as-is, the reference standard, the peroxide value and its date, the metal panel and the microbiology. The specification must name retinol, the CAS number and the assay basis. Add the technical data sheet, the safety data sheet, the allergen and GMO statements, the country of origin, the antioxidant declaration, the residual-solvent statement where a solvent is used, and the IU/g conversion used for the label. The analytical methods library describes the assays behind those figures. Put a dated document list at the front of the folder and update it with each revision. If a statement is missing for the lot, name the gap before the order moves; it is easier to close at quotation than at the port. The product page carries the catalogue specification, and the vitamin A page covers the ester grades that a form switch would bring into the file. ## Checklist before the first order - The revision number, the CAS number and the exact form are written out. - COA, TDS, SDS, allergen, GMO, origin, antioxidant and residual-solvent statements are on file. - The daily dose, the overage and the vitamin A ceiling are calculated for the destination. - The label declares the form and the unit the market requires, with the IU conversion shown. - The claim wording and its conditions have been reviewed for the destination. - Source, antioxidant package and pack are under change control. - Quotation, specification and certificate all cite one revision number. The quality page describes the release file; the EU regulatory notes collect the framework references; the MOQ page covers pack and lead time. ### 06 How we prove a retinol lot is the free alcohol URL: https://nutrition.rainwoodbio.com/products/vitamins/retinol/identity/ Reviewed: 2026-11-20 A retinol lot is the free alcohol when four lines agree: the document names retinol and CAS 68-26-8; HPLC retention and the UV spectrum match a retinol reference with a maximum near 325 nm; a method that resolves the esters shows no ester peak; and the peroxide value and antioxidant declaration fit the release limits. The assay alone cannot separate retinol from a retinyl ester or from a carrier-oil dilution. In one lineIdentity for retinol is a set of agreeing numbers: retention and spectrum say the retinol, the absence of an ester peak says the free alcohol, and the peroxide value says how much has already oxidised. ## Four layers, four questions Naming the right material on a certificate is not the same as proving it. Each layer below answers a different question and needs its own evidence. An answer that stops at the first layer describes the paperwork and says nothing about the oil. Four layers of retinol identity | Layer | Question | Test | What it proves | Document | Is the form and CAS number named? | Name, CAS 68-26-8, formula C20H30O | Paperwork only | Chromatography | Is the peak retinol? | HPLC retention and UV spectrum near 325 nm | The molecule, not the form | Ester check | Is it the free alcohol? | Direct HPLC that resolves retinol from the esters | That no ester was substituted | Oxidation state | How much has already degraded? | Peroxide value, isomer profile, antioxidant assay | Condition, not identity ## The two ratios that matter The first is the isomer ratio. All-trans-retinol is the form the label assumes, and heat or light converts part of it to cis isomers that absorb less strongly and at slightly different wavelengths. The chromatogram shows the all-trans peak and the cis peaks beside it. The catalog requires “HPLC and UV conform” rather than a fixed number, so the certificate may report conformity; if the profile is disputed, ask for the chromatogram and read the ratio from the peak areas instead of accepting the word. The second is the free-retinol to ester ratio. It has to be measured on the sample as supplied, with a method that resolves retinol from retinyl palmitate and retinyl acetate. A method that saponifies the oil first converts any ester to retinol and reports total vitamin A, which will hide an ester substitution completely. If the certificate does not say whether the sample was saponified, ask; the difference decides whether the number can detect a substitution at all. Neither ratio is a release limit in the catalog. They are the numbers that let a buyer audit the identity when a lot is new, disputed, or from a source with no history. ## Why X-ray diffraction does not answer this question X-ray diffraction needs a crystal lattice. Retinol as supplied here is an oil, so a diffraction scan returns an amorphous halo with no pattern to match; the method cannot identify it and cannot quantify it. A “conforms” statement on an oil is not evidence, because there was nothing to compare. The method does have a place at the edges of the question. If a lot is presented as crystalline retinol, or as a retinol powder on a carrier, a diffraction pattern can separate a crystalline solid from an amorphous one and can identify the carrier. Even then it identifies the solid phase, not the retinol on it. For this catalog product, identity rests on chromatography and on the ester check, and XRD is not a release test. ## What adulteration looks like Substitutions and dilutions to watch for in a retinol oil | Adulterant | What it does | Signal | Test | Retinyl palmitate or acetate | A different molecule with lower IU density | Extra peak at the ester retention time | Direct HPLC; compare with and without saponification | Carrier-oil dilution | Lowers the assay per gram | Assay below 95.0%; carrier fatty acids present | Mass balance; fatty-acid profile by GC | Beta-carotene | Colours the oil; different chromophore | Spectrum shape differs; no retinol maximum | HPLC with diode-array detection | Cis-rich material | Lower potency at the same assay | Shifted, weaker ultraviolet band | Isomer profile from the chromatogram | Antioxidant masking | Hides an ageing oil for a short time | Peroxide value climbs quickly after release | Peroxide value at release and after stress Colour is the weakest signal. Yellow to amber covers a wide normal range, and beta-carotene can reproduce it. The strong signals are the retention time with its spectrum, the ester check and the peroxide value. A certificate that reports appearance and assay but neither the spectrum nor the ester method has left the most likely substitution untested. ## How to write identity into the specification - “Retinol, all-trans-retinol, CAS 68-26-8, C20H30O, oil.” - “Assay ≥95.0% as-is by HPLC with UV detection; state the reference standard.” - “Identification by retention time and UV spectrum; the chromatogram to be available on request.” - “Direct method that resolves retinol from retinyl palmitate and retinyl acetate; state whether the sample is saponified.” - “Peroxide value ≤10.0 meq O₂/kg, with the test date.” - “Declared antioxidant, with its identity and level.” - “Destination market and form confirmed before the order.” ## Six questions for the supplier - Which form is this lot: retinol, or an ester described as vitamin A? - Can you send the chromatogram and the UV spectrum, not only the assay percentage? - Was the sample saponified before the assay, and does the method resolve the esters? - What is the peroxide value for this lot, and when was it measured? - Which antioxidant is present, at what level, and how is it declared? - If identity is disputed, will you join a re-test on the retained portion? Together those answers form an identity file that no single assay figure can replace. The product page carries the catalogue specification; the COA page shows where each figure sits on the certificate; the grades page sets the free alcohol against the esters; the level-four comparison covers the label consequences; the analytical methods library explains the separation; and the quality page describes the release file. ### 01 What the COA for retinyl palmitate actually contains URL: https://nutrition.rainwoodbio.com/products/vitamins/retinyl-palmitate/coa/ Reviewed: 2026-11-20 A retinyl palmitate certificate reports appearance, HPLC identification with a UV spectrum, the assay in MIU/g, the retinol equivalent, the carrier, loss on drying, particle size, the heavy-metal panel and microbiology. Each line needs its method and release limit, and the measured result belongs in its own column. The limits below are the catalog specification; the batch COA confirms a particular pouch or drum. In one lineThe IU/g result is an HPLC figure on a carrier, so the certificate has to name the method, the conversion and the matrix beside it. ## The certificate as a test report A certificate is auditable when each row answers three questions: what was measured, which method produced the number, and which limit the lot was released against. For this product there is a fourth question, because the vitamin is dispersed in a carrier and the carrier is most of the powder. A row that says only “conforms” asks the reader to accept a conclusion without the evidence behind it. Identity, assay and matrix · retinyl palmitate 1.0 MIU/g powder | Parameter | Method | Release limit | Appearance | Visual | Light yellow to yellow powder | Identification | HPLC retention and UV spectrum | Conforms to a retinyl palmitate reference | Assay | HPLC with UV detection | 1.0–1.1 MIU/g | Retinol equivalent | Calculated from the assay | 300,000–330,000 µg RE/g | Carrier | Declaration | Named on the certificate | Loss on drying | Gravimetric | ≤5.0% | Particle size | Sieve analysis | ≥95% through 80 mesh The lot code, dates, pack size and specification version belong on the same sheet. A result column filled with the specification range is a copy of the gate, not a measurement. “Passes specification” is still a conclusion; the reader should be able to reach it from the numbers above. ## The IU figure and its basis The IU is not a mass unit; it counts vitamin A activity. The convention assigns 3.33 IU to one microgram of retinol, so one IU equals 0.3 µg of retinol equivalent. A 1.0 MIU/g powder therefore contains 300 mg of retinol equivalent per gram. Pure retinyl palmitate is about 1.82 MIU/g, because retinol is 54.6% of the ester by mass. At 1.0 MIU/g the powder is roughly 55% ester; at the top of the catalog range, 1.1 MIU/g, it is roughly 60%. That arithmetic is why the carrier line matters. The rest of the powder is carrier, moisture and minor solids, and its identity and ratio are part of the specification. The certificate should state whether the assay is reported as sold or on the dried basis. With loss on drying allowed up to 5.0%, a dried-basis figure reads above an as-sold figure, and the two are not interchangeable. The method also needs a basis. A direct HPLC method reports the ester; a method that saponifies the sample reports total vitamin A after hydrolysis, including any free retinol. Both are legitimate, but two results are comparable only when the method and the basis match. A figure without either is a number, not a specification result. ## Release limit versus batch result The gate and the measurement are different things. The release limit is the boundary the lot must meet; the batch result is what the laboratory found on that lot. Keep them in separate columns, with the method beside them. The table below shows what the result column should contain for each line. What the result column should contain | Parameter | Release limit | Result column | Assay | 1.0–1.1 MIU/g | A measured MIU/g with the basis and the method | Retinol equivalent | 300,000–330,000 µg RE/g | The calculated figure with the conversion shown | Loss on drying | ≤5.0% | A measured percentage | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot | Particle size | ≥95% through 80 mesh | The measured percentage through the sieve The carrier is declared, not assayed. The certificate should name it, and the buyer should ask for the ratio and the source where they affect the label. The catalog does not set a free-retinol or cis-isomer limit. When oxidation is a concern, ask for the chromatogram and the stability summary rather than reading the IU figure as the whole picture. ## What moves between batches A heavier vitamin load in the emulsion raises the IU/g; dryer losses lower it. The carrier ratio changes the rest of the powder, and a carrier lot with a different moisture content shifts the as-sold figure without any change in the vitamin input. Milling and sieving set the 80 mesh result, so a changed screen shows up there first. Colour is the least quantitative line and often the most revealing. Light yellow to yellow is a wide window, and a shift inside it is not an identity failure. A markedly deeper or duller powder can point to heat exposure, a different carotenoid load or an oxidation product while the assay still passes. The isomer profile is a finer signal: HPLC can show a growing cis region beside the all-trans peak, and that change may not move the IU/g below its limit until late. If an antioxidant is present, its identity and level can change between lots, and the certificate or the specification should say so. A trend across several lots says more than one result near an edge. The lot code should match the certificate, the pouch or drum, and the retained sample. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a label that names the ester, or a disputed result. The useful panel is HPLC with UV against a retinyl palmitate standard, saponification followed by gas chromatography of the fatty acid to show palmitate, loss on drying, ICP-MS for the metal panel, microbiology and a screen for beta-carotene. Ask the laboratory for its detection limit on each screen. A “not detected” line without a limit is evidence about the method's sensitivity, not about the sample. The report should name the column, mobile phase, wavelength and assay basis, and state whether the sample was saponified. Chain of custody matters: the sample tested should be the sample retained, and the report should identify the lot. If a result is contested, give the referee the retained sample, the certificate and the specification, and ask for the tests that separate the esters. ## What to compare between suppliers Put eight lines side by side: ester and CAS number; assay in MIU/g and its basis; method and reference standard; retinol equivalent; carrier, ratio and source; loss on drying; particle size; and the contaminant and microbiology panels. Two quotations that agree on IU/g but differ on ester, carrier or basis are not describing the same powder. Traceability is the second check. The certificate should identify the manufacturer and the carrier, and one lot code should appear on the certificate, the pack and the retained sample. The specification version belongs on the sheet as well. The catalog table is on the retinyl palmitate product page. The ester comparison sits on the vitamin A page, the separation is described in the analytical methods library, and the release workflow is on the quality page. The tests that separate the esters are on the identity page. ### 02 Potency, carrier and mesh: choosing a retinyl palmitate grade URL: https://nutrition.rainwoodbio.com/products/vitamins/retinyl-palmitate/grades/ Reviewed: 2026-11-20 Retinyl palmitate is catalogued as a 1.0–1.1 MIU/g powder on a carrier, sieved to 80 mesh, with a granulated form available on request. Within that range the grade choice is IU density, carrier system and particle form. All three remain retinyl palmitate; an acetate or the free retinol is a different product with a different label name. In one lineThe grade is the IU density, the carrier and the particle form; the ester name is the identity, not the grade. ## Why the grade is a separate decision Two powders can both read “retinyl palmitate 1.0 MIU/g” and still differ in the mass of ester they carry, the carrier that surrounds it, and the way they flow. The IU figure fixes the vitamin activity per gram, not the powder's density, its allergen profile or its behaviour in a tablet press. Those belong to the grade. The carrier is the largest single component after the ester. At 1.0 MIU/g the ester is about 55% of the powder; the rest is carrier, moisture and minor solids. A different carrier ratio changes the label, the mouthfeel of a stick pack and the way the powder picks up water. The particle form changes flow, dust and segregation. A grade is therefore a package of four decisions: ester, IU density, carrier and mesh. ## The range at its two ends The catalog range is narrow by design: 1.0 to 1.1 MIU/g, a ten percent spread. The lower end leaves more carrier and a slightly larger powder mass per IU; the upper end carries more ester and less carrier. The granulated option keeps the same chemistry and changes the physical form for handling. Retinyl palmitate grades in the catalog range | Grade | Retinol equivalent | Ester mass | Typical use | 1.0 MIU/g powder, 80 mesh | 300 mg RE/g | About 55% | Standard capsule, tablet and stick-pack blend | 1.1 MIU/g powder, 80 mesh | 330 mg RE/g | About 60% | Lower powder mass per IU; tighter fill weight | Granulated 1.0–1.1 MIU/g | 300–330 mg RE/g | About 55–60% | Flow and dust control on request The ten percent difference is small in a formula but not always negligible. A capsule that needs 3,000 IU takes 3.00 mg of the 1.0 MIU/g powder and 2.73 mg of the 1.1 MIU/g powder before any overage. On a fill weight of a few hundred milligrams, that is a rounding change; on a low-dose tablet it may decide whether the vitamin fits. ## Powder, granule and the carrier The standard form is an 80 mesh powder: at least 95% passes the sieve. A fine powder disperses quickly in a drink mix and blends evenly in a dry premix, but it also makes dust and can segregate from coarser excipients. Granulation binds the particles into a coarser, freer-flowing form; it reduces dust and improves flow, though dispersion is slower and the bulk density changes. The carrier can be gelatin, starch, sucrose, a gum or a blend. The certificate must name it, and the buyer should ask for the ratio and the source where they affect the label. Gelatin brings an allergen question and a dietary one; sucrose is a sugar for labelling; starch can raise a gluten question. These are grade facts, not marketing details, and they should be settled before the first stability batch. Colour is a weak grade signal. Light yellow to yellow covers the range, and a slightly deeper powder is not automatically a different ester. The stronger checks are the IU/g, the carrier declaration and the mass balance between them. ## Matching the grade to the dosage form For a capsule or tablet, the 80 mesh powder is the usual starting point: it blends, it fills and it can be compressed with the rest of the formula. The 1.1 MIU/g end helps when the vitamin must occupy less space. A granulated grade is worth testing when the blend is dusty, when flow in the hopper is inconsistent, or when the vitamin segregates from a coarse excipient. For a powder stick or a drink mix, dispersion matters more than flow. The fine powder wets and disperses in warm water, though the ester is fat-soluble and the drink will be an emulsion or a suspension rather than a clear solution. The carrier can affect taste, mouthfeel and the label. If the product claims no added sugar, a sucrose carrier matters; if it makes a vegan claim, a gelatin carrier matters. Dose arithmetic is shared across the range. A 3,000 IU portion needs 3.00 mg of the 1.0 MIU/g powder, or 2.73 mg at 1.1 MIU/g, before overage. An 800 µg RE portion needs 2.67 mg of the 1.0 MIU/g powder. Those figures are arithmetic, not a recommended intake, and they belong next to the label conversion rather than in a separate note. ## What to write into the specification A usable grade line has seven parts. It names the ester and the CAS number, states the IU/g and the HPLC method, gives the retinol equivalent, names the carrier and its source, fixes the loss on drying and the mesh, and adds the contaminant and microbiology panels. If an antioxidant is present, it belongs in the line too, with its identity and level. - Name retinyl palmitate, with CAS 79-81-2 and the formula. - State the IU/g, the HPLC method and whether the result is as sold or dried. - Give the retinol equivalent in µg RE/g. - Name the carrier, its source and ratio; declare any antioxidant. - Fix loss on drying at ≤5.0% and the 80 mesh particle size. - Attach the heavy-metal and microbiology panels. - Record the destination market, label name and overage policy on the order. The grade line is also a change-control line. A switch from 1.0 to 1.1 MIU/g, from powder to granule, or from one carrier to another is a new specification, a new certificate and often a new label. The old stability file does not carry over, because the powder mass, the carrier load and possibly the allergen statement have changed. ## When a different grade is the wrong choice Do not move to the upper end of the range to make a tablet smaller if the label claim and the overage have not been recalculated. Do not switch to a granulated grade to solve a flow problem without checking dispersion in the finished drink; a granule that flows well can sit at the bottom of a stick pack. Do not accept a carrier change on the certificate alone: the label, the allergen statement and the taste have to be reviewed. If the formula needs an IU density outside the 1.0–1.1 MIU/g range, or if the label and the market file already name retinyl acetate, the palmitate range is not the answer. The ester is the identity, and the grade cannot substitute for it. The retinyl palmitate product page carries the catalog table; the vitamin A page covers the acetate range; the analytical methods library describes the HPLC assay; the quality page covers release. The palmitate versus acetate page takes the ester comparison further. ### 02.1 Retinyl palmitate vs retinyl acetate: the ester, the stability and the label URL: https://nutrition.rainwoodbio.com/products/vitamins/retinyl-palmitate/grades/retinyl-palmitate-vs-retinyl-acetate/ Reviewed: 2026-11-20 Retinyl palmitate and retinyl acetate are both esters of retinol, and both are declared against the same IU convention. They are not interchangeable gram for gram: the palmitate carries a sixteen-carbon fatty acid and 54.6% retinol by mass, the acetate a two-carbon acid and 87.2%. At the same IU/g the palmitate powder contains about 1.6 times the ester mass, so a switch changes the powder weight, the carrier load, the stability file and the label. In one linePalmitate and acetate share the retinol but not the mass: at the same IU/g the palmitate powder carries about 1.6 times the ester, and the label must name the one that was used. ## Two esters, one retinol The alcohol is retinol; the difference is the acid attached to it. Acetate is the short-chain ester, a crystalline solid at room temperature. Palmitate is the long-chain ester, an oil or a waxy solid. That physical difference changes how each material is handled. Retinyl palmitate and retinyl acetate · molecular comparison | Property | Retinyl palmitate | Retinyl acetate | CAS number | 79-81-2 | 127-47-9 | Formula | C36H60O2 | C22H32O2 | Molecular mass | 524.86 g/mol | 328.49 g/mol | Fatty acid released on hydrolysis | Palmitic acid, sixteen carbons | Acetic acid, two carbons | Retinol share of the pure ester | About 54.6% by mass | About 87.2% by mass | Pure ester potency | About 1.82 MIU/g | About 2.9 MIU/g | Physical character | Oil or waxy solid | Crystalline solid | Ingredient name | Retinyl palmitate | Retinyl acetate The shared retinol keeps the IU arithmetic common; the fatty acid changes the mass, the melting behaviour and the oil solubility. A purchase order that says “vitamin A” has specified neither ester. ## Potency per gram and the powder weight One microgram of retinol is counted as 3.33 IU, so one IU is 0.3 µg of retinol equivalent. A 1.0 MIU/g powder therefore contains 300 mg of retinol equivalent per gram, whichever ester carries it. The difference appears in the mass of ester that has to be dispersed to reach that figure. At 1.0 MIU/g, the palmitate grade is about 55% ester, while an acetate grade at the same IU/g is about 34.5%. On the catalog powders, a 3,000 IU portion takes 3.00 mg of the 1.0 MIU/g palmitate powder. The same 3,000 IU from a 500,000 IU/g acetate powder takes 6.00 mg. The acetate is more potent per gram of pure ester, so it needs less ester mass for a given IU figure. Neither number is a recommendation. Convert to µg RE or mcg RAE before comparing quotations, because two powders can carry the same IU/g and different ester masses. ## Stability follows the matrix, not the ester name Both esters are sensitive to light, heat and oxygen, and both can hydrolyse to retinol and the corresponding fatty acid. The esters differ in how the matrix exposes them. The acetate is crystalline and is usually spray-dried into a free-flowing powder, where the carrier limits mobility and oxygen contact. The palmitate is oily or waxy, so it is often emulsified before drying or used in an oil phase, a softgel or an emulsion, where the carrier oil, the headspace and the shell become part of the stability system. Hydrolysis is the shared route. Water and acid split the ester, and free retinol is more exposed to oxidation than the ester. The rate depends on the matrix, the pH and the temperature, not on the ester alone. A palmitate in an acidic beverage is not automatically more stable than an acetate there, and an acetate in a dry blend is not automatically more stable than a palmitate in oil. Light protection is common to both: an opaque pack, an opaque shell and a carton are part of the formulation. An antioxidant, if used, must be declared and tested. The ester name says neither whether one is present nor which carrier is used; the carrier can change moisture pickup, flow and the allergen statement. ## Matching the ester to the dosage form Dosage forms and the ester that usually suits them | Dosage form | Usual ester | Why | Tablet or capsule, dry blend | Acetate powder | Free-flowing, sieved, easy to blend and declare | Softgel | Palmitate, or acetate in oil | Oil solubility and a simple oil fill | Oil or drops | Palmitate, or acetate | Solubility in the carrier oil; the label follows the ester | Emulsion, gummy or beverage | Either, as a dispersion | The matrix and the process decide; stability data is required | Dry stick pack | Acetate powder | Dispersion in warm water and a low-moisture matrix The table is a starting point, not a rule. A softgel can use an acetate if the oil and shell suit it; a tablet can use a palmitate powder if the carrier and compression data support it. The chosen ester still has to be tested in the finished matrix; a bulk result does not transfer from powder to beverage. ## What the label has to say In the EU and the UK, the ingredient list names the ester, “retinyl palmitate” or “retinyl acetate”, and vitamin A is declared in µg RE against the 800 µg RE nutrient reference value. US labels declare vitamin A in mcg RAE on the Supplement Facts panel, against a Daily Value of 900 mcg RAE, with the source in parentheses, for example “Vitamin A (as retinyl palmitate)”. A label that says only “vitamin A” does not tell the buyer which ester was used, and it does not match a certificate that names one. The carrier is a label fact as well. A fish-derived gelatin can trigger an allergen statement; sucrose counts as a sugar for a “no added sugar” claim; a starch source can raise a gluten question. A new ester often arrives with a new carrier, so both lines need review. The IU and the RE or RAE are two expressions of the same vitamin A content. The label should use the unit the market requires and keep the conversion consistent with the assay. A switch from one ester to the other is a new artwork cycle, not a unit conversion. ## When to choose which ester Palmitate is the natural fit for an oil, an emulsion or a softgel where oil solubility decides, or where the label and customer specification already name it. The 1.0–1.1 MIU/g powder is the catalog form, and the granulated option helps with flow. Choose the acetate when the dosage form is a dry blend, when the label and the market file already name the acetate, or when the powder must stay free-flowing in a low-moisture matrix. The IU figure alone is a poor basis for a choice. Either ester can hit the same figure with a different dilution, and the label, carrier and stability file will not match. A switch should start with five documents: the new certificate, chromatogram, hydrolysis data, carrier declaration and matrix-specific stability summary. The retinyl palmitate product page carries the palmitate specification; the vitamin A page covers the acetate range; the analytical methods library describes the separation; the quality page describes release. The grade page covers the palmitate grade choices. ### 03 Retinyl palmitate stability: light, heat and the carrier URL: https://nutrition.rainwoodbio.com/products/vitamins/retinyl-palmitate/stability/ Reviewed: 2026-11-20 Retinyl palmitate is degraded by light, heat, oxygen and water, and the powder survives because the carrier, any declared antioxidant and the sealed pack take most of the exposure. The 1.0–1.1 MIU/g powder is the more forgiving format; an oil, an emulsion or a beverage is the less forgiving one. Shelf life is assigned from stability data for the exact pack and matrix, not from the certificate. In one lineRetinyl palmitate is lost through light, heat, oxygen and hydrolysis, and the carrier and the sealed pack are what slow that loss. ## The powder in its sealed pack In the dry powder, the ester is dispersed in a carrier matrix. That matrix limits the mobility of the oil droplets and slows oxygen contact, which is why the sealed powder is the easiest format to hold. The release limits describe the matrix that does the protecting: loss on drying at or below 5.0%, a named carrier and an 80 mesh powder that does not segregate in the bag. The standard packs are a 1 kg foil pouch and a 25 kg fiber drum. Both block light while closed, and both depend on the seal and the liner. A pouch that has been opened and folded is no longer a sealed pack; the headspace now holds humid air, and the powder can cake at the fold. Keep the remainder in an opaque, moisture-barrier container, or use it within the in-use period written on the specification. After cold storage, let the closed pack reach room temperature before opening it. Condensation on a cold powder is a direct source of moisture, and the loss on drying can move before the first scoop is taken. The same rule applies to a drum that has travelled in an unheated hold. ## Oil, emulsion and the liquid matrix The ester is fat-soluble. In an oil or a softgel fill it is genuinely dissolved; in an emulsion, a gummy or a fortified drink it is dispersed, and the dispersion is the weak point. The carrier oil can oxidise, and the peroxides it forms attack the vitamin. Light passes through many oils and through a clear shell. The oil and its peroxide value are part of the stability system, not a neutral vehicle. Acid is a specific risk. Water and acid split the ester into retinol and palmitic acid, and free retinol is more exposed to oxidation than the ester. A low-pH beverage therefore needs its own data, not a projection from a neutral powder. Pasteurisation and hot fill add a heat load that the dry powder never sees; a late addition reduces that load but does not remove the need to test the finished drink. A clear solution is not the natural format for a fat-soluble ester. A formulator who needs one has to build a solubilised or emulsified system, then test the system for light, oxygen, pH and heat. The raw material's bulk stability does not transfer to that system. ## What drives the loss Degradation routes for retinyl palmitate and the controls that address them | Factor | What it does | Control | Light | Isomerises the conjugated chain and fades the powder | Foil pouch, opaque drum, amber or opaque shell, carton | Heat | Raises oxidation and isomerisation during drying, blending or cooking | Lower process temperature, shorter hold, cool before packing | Oxygen | Oxidises the chain and consumes the antioxidant | Sealed pack, low headspace, nitrogen flush where specified | Moisture | Plasticises the carrier, causes caking and enables hydrolysis | Loss on drying ≤5.0%, sealed pack, dry store | Acid | Hydrolyses the ester to retinol and palmitic acid | Keep the vitamin out of the acid phase; test the matrix | Trace metals | Catalyse oxidation at low concentration | Heavy-metal panel, source control, avoid iron and copper contact The factors act together. A warm, bright, humid store is worse than three separate exposures, and an acidic emulsion in clear glass combines light, oxygen, heat and hydrolysis. The useful question is not whether the ester is stable in general, but how long it holds in a named pack, at a named condition, with a named test panel. ## A stability protocol for the ingredient The protocol should fix the pack, the conditions, the time points, the method and the acceptance limits before the first sample enters the chamber. A typical design holds samples at 25 °C and 60% relative humidity for the long term, at 30 °C and 65% relative humidity as an intermediate condition, and at 40 °C and 75% relative humidity for acceleration. A light-exposure arm follows the standard photostability design, and an open-pack arm shows what happens after the seal is broken. Test the assay in MIU/g and the retinol equivalent, loss on drying, appearance, HPLC identity and microbiology at each point. For an oil or an emulsion, add peroxide value, pH and a physical check for separation. The report should show the individual results, not only a pass statement, and it should identify the pack and the lot family. A result from a 25 kg drum does not describe a 1 kg pouch; the headspace and the opening history are different. ## The finished formula changes the answer A capsule or tablet starts with low water activity, but the shell and the excipients can still move moisture into the fill. The carrier can pick up water from the blend, and the loss on drying should be checked after storage as well as at release. Compression heat and prolonged exposure to air during tableting are additional loads that the bulk powder did not experience. A stick pack fails at the seal before it fails in the powder: a pinhole in the foil is enough. A beverage combines light, pH, heat and dissolved oxygen, and a gummy adds a drying step and a high surface-to-volume ratio. In each case the formulator decides whether an overage is needed, and that decision belongs to the label and stability file. An overage does not repair a pack that lets moisture in, and an antioxidant does not replace a seal. ## How the shelf life is set We do not assign one shelf-life number to retinyl palmitate. The retest period is written on the specification and rests on the stability file for that exact pack, and the file has to name the storage condition and the tests. Without those three, a date is an assertion. At the end of the retest period, re-assay the retained sample before extending use. Do not extend by assumption, and do not move a bulk figure to a repacked container. A change of carrier, mesh, pack or ester is a new stability question. The retinyl palmitate product page lists the standard packs; the vitamin A page covers the acetate system; the analytical methods library describes the assay; the quality page describes release and retention. ### 04 Retinyl palmitate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/vitamins/retinyl-palmitate/moq/ Reviewed: 2026-11-20 The minimum order for retinyl palmitate is 1 kg, supplied as a 1 kg foil pouch; the bulk pack is a 25 kg fiber drum. Lead time is 1–7 days for the standard powder, and a granulated form is quoted on request. A firm quotation needs the ester and CAS number, the IU/g and its basis, the carrier, the quantity and pack, the destination and the documents. In one lineThe 1 kg pouch is the smallest traceable lot; below it the material is a repack and the chain of custody weakens. ## Why the minimum is 1 kg A 1 kg pack covers a bench trial, a retained sample and an independent identity test. It is also small enough to move as a parcel, which matters when a formulator needs material before the production plan is fixed. The pouch is a commercial unit with its own lot code and certificate; it is not material scooped out of a drum. A smaller quantity is normally split from a larger lot and repacked. The chemistry stays the same, but the original pack identity is lost, the handling record grows, and the sample may no longer represent the lot. The 25 kg drum lowers handling per kilogram, but it commits more inventory and a longer storage period. The minimum is a pack and traceability decision, not a volume incentive. ## Packs and formats Standard retinyl palmitate packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Light and moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | 80 mesh powder is the standard form The catalog form is an 80 mesh powder: at least 95% passes the sieve. Granulation is a different particle form, not a packing choice. If the blend needs a coarser or freer-flowing powder, say so before the quotation, because the change moves the particle-size line and may move the lead time. A carrier change is a new specification as well, not a packing preference. ## Lead time and dispatch The standard pack is quoted at 1–7 days after the order is confirmed. Picking, document preparation and dispatch fall inside that window; the shipping transit, customs clearance and the buyer's quality release do not. A granulated grade or a non-standard pack takes longer, and the quotation should state the additional time separately. Ask for the dispatch date, not only the range. A 1 kg pouch usually travels as a parcel; a 25 kg drum moves on a pallet. The Incoterm says who books the freight and where the risk passes, and the COA should travel with the pack rather than arrive after it. For a light-sensitive material, the shipping route and the number of transfers matter as well as the transit time. ## What a quotation needs Six details make a quotation firm enough to compare with another: - Product and ester. Retinyl palmitate, CAS 79-81-2, not “vitamin A” or an acetate. - Specification. Assay in MIU/g and its basis, retinol equivalent, carrier, loss on drying, mesh and contaminants. - Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated variant. - Destination and Incoterm. The country, the address or port, and the trade term. - Documents. COA, specification, SDS, carrier and allergen statements, and any market-specific declaration. - Intended use and market. Supplement, food or another use, and the country where the finished product will be sold. A quotation that names only the IU/g has not identified the material. The carrier and the IU basis are part of the offer, and the same powder can suit one destination and fail the file for another. Commercial terms belong on the quotation, not here. ## A qualification sample is a lot The 1 kg pack is the qualification sample. Test identity, assay, loss on drying, carrier and microbiology before scaling, and keep a retained sample from that pack. The sample, the certificate and the quotation should share one lot code. Without that link, the material is a demonstration rather than a qualification. A trial that needs less than a kilogram is a split, not the catalog pouch. The material comes from a bulk lot, carries a separate handling record, and cannot be documented as the 1 kg foil pack. Ask for the split in writing and keep its lot code with the trial results. The bench powder and the production powder may have different lot codes even when the certificates look alike. ## Terms to settle before the first order Record the commercial and quality terms together: Incoterm, pack, dispatch window, specification version, a COA per lot, the retained sample, the retest period and the change route. A quality agreement signed before the first production order is easier than the same discussion after a dispute. When a lot misses the specification, the evidence is the retained sample and a joint re-test against the named method. A photograph of the drum will not settle it. The agreement should name the referee laboratory and say which side pays for the work. The retinyl palmitate product page carries the catalog specification; the vitamin A page covers the acetate range; the analytical methods library defines the assay; the quality page describes release and retention. Pack and shipping questions sit on the stability page. ### 05 The regulatory file for retinyl palmitate URL: https://nutrition.rainwoodbio.com/products/vitamins/retinyl-palmitate/compliance/ Reviewed: 2026-11-20 Retinyl palmitate is a vitamin A ester supplied as a 1.0–1.1 MIU/g powder on a carrier. The supplier's file proves the material, the lot and the specification; the destination file proves the route, the level and the label for the finished product. The buyer's regulatory team confirms that route for the market where the product will be sold, and the brand owner owns the finished label. In one lineThe material file proves the ester and the lot; the destination file proves the route, the level and the label. ## What the file contains The file has four parts: the specification for retinyl palmitate, the certificate that releases the lot, the destination rules for the finished product, and the change-control record for source, carrier and pack. The certificate and the technical data sheet describe the material. Neither of them settles the market route, which is a separate decision recorded by the buyer. The ester is the first line of the file. Retinyl palmitate, retinyl acetate, retinol and beta-carotene are different ingredients with different CAS numbers, analytical standards and label names, even though all can contribute vitamin A activity. A file that proves “vitamin A” without naming the ester does not prove the ingredient purchased. This page does not assert that the product is authorised as a novel food, a new dietary ingredient or a permitted ingredient in any market; it lists the framework and the documents the buyer needs to confirm that route. ## European Union For the EU, the relevant framework is Directive 2002/46/EC on food supplements; Annex II, Part A sets out the vitamin A forms that may be used, and the buyer's regulatory team checks the current list against the form on the certificate. Labelling follows Regulation (EU) No 1169/2011 and the supplement-specific provisions, with vitamin A declared in µg RE per portion against an 800 µg RE nutrient reference value. The EU does not set one harmonised maximum for vitamin A in food supplements; several member states apply national rules, so the destination market has to be checked. Contaminants are governed by Commission Regulation (EU) 2023/915; the metal limits in the table below are catalog release limits, and the destination text is checked separately. Arsenic is a specification limit here, not a general EU supplement maximum. Check the current consolidated text as of this review before relying on a limit. ## United States In the US, the file has to support the dietary-ingredient status that the supplier relies on and the use the buyer intends. The supplier names that basis; the buyer checks it extends to the finished product and the label. Manufacturing sits under the dietary supplement cGMP (21 CFR 111), and the finished label uses the Supplement Facts format in 21 CFR 101.36. Vitamin A is declared in mcg RAE against a Daily Value of 900 mcg RAE, with the source in parentheses, for example “Vitamin A (as retinyl palmitate)”. The carrier and any antioxidant are listed as other ingredients. There is no federal heavy-metal maximum for dietary supplements, so the buyer sets the specification; California's Proposition 65 adds a separate lead-warning route. A disease claim would turn the product into a drug, so the label review has to police that boundary. ## United Kingdom Great Britain retains the EU supplement framework through the Food Supplements (England) Regulations 2003 and the devolved equivalents. Vitamin A is declared in µg RE against the 800 µg RE nutrient reference value, and claims follow the GB register. Northern Ireland applies the EU rules, including the EU labelling and contaminant framework, so a pack sold across the UK can face two registers. The delivery address decides which route applies; record that decision with the order and keep it beside the label and certificate. The form and the carrier do not change at the border; the label wording and the claim evidence may. ## Contaminant and microbiological limits Catalog release limits · retinyl palmitate powder | Parameter | Limit | Basis | Lead (Pb) | ≤3 mg/kg | Catalog limit; EU supplement limit to confirm | Arsenic (As) | ≤2 mg/kg | Specification limit; no general EU supplement maximum | Cadmium (Cd) | ≤1 mg/kg | Catalog limit; EU supplement limit to confirm | Mercury (Hg) | ≤0.1 mg/kg | Catalog limit; EU supplement limit to confirm | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Catalog specification These are release limits for the raw material, not a finished-product exposure calculation. The buyer converts the result to the daily dose and checks it against the destination rule. The batch COA confirms the measured figure for each lot; a limit without a result is only half of the evidence. ## Claims and the label boundary The supplier makes no claim for the ingredient. In the EU and the UK, any vitamin A claim must come from Regulation (EC) No 1924/2006, meet its conditions and hold for the finished product at the declared portion. Nutrient content claims such as “source of vitamin A” have their own thresholds, 15% of the nutrient reference value per portion, and those are a labelling calculation rather than a property of the powder. In the US, a structure/function statement is the brand owner's statement. It must be truthful, must not be misleading, must carry the DSHEA disclaimer and must not cross into a disease claim. The supplier's documents describe composition and purity only. This page does not restate claim wording; the brand owner takes the wording from the current register and keeps the evidence for the finished product. ## The document set Documents that support a retinyl palmitate ingredient file | Document | What it should show | Certificate of analysis | Lot results against the specification, with methods and basis | Technical data sheet | Identity, IU/g, carrier, solubility, mesh and storage | Safety data sheet | Handling, transport and exposure information | Specification | Agreed limits, IU basis and version | Carrier statement | Carrier identity, ratio and source | Allergen and GMO statements | The allergen risk and the GMO status of the carrier | Antioxidant declaration | Identity and level, if an antioxidant is present | Stability summary | The pack, the conditions and the assigned retest period The carrier statement deserves its own line. Gelatin brings an allergen and a dietary question, sucrose matters for a sugar claim, and starch can raise a gluten question. The certificate alone rarely answers these, so ask for the statement in writing and keep it with the specification version that governed the lot. ## Checklist before the first order - The specification names retinyl palmitate, the CAS number and the IU/g. - The COA carries the same lot code as the pack and the retained sample. - The carrier, its ratio and its source are declared. - The IU/g is converted to µg RE or mcg RAE on the label basis used in the market. - The contaminant and microbiology results are on the certificate, with methods. - The destination route and any member-state limit are recorded. - Any claim comes from the current register for the destination and is supported for the finished product. - The stability summary matches the pack and the matrix that will ship. The retinyl palmitate product page carries the catalog specification; the vitamin A page covers the acetate range; the analytical methods library describes the assays; the quality page describes release. The identity page lists the tests that prove the ester. ### 06 How to prove a lot is retinyl palmitate URL: https://nutrition.rainwoodbio.com/products/vitamins/retinyl-palmitate/identity/ Reviewed: 2026-11-20 A retinyl palmitate lot is the named ester when four lines of evidence agree: the document names the ester and CAS number, the HPLC peak matches a retinyl palmitate standard with its UV spectrum, hydrolysis releases palmitic acid, and the IU-to-mass balance fits the declared grade. At 1.0 MIU/g the ester is only about 55% of the powder, so colour and a single assay value cannot establish identity. The carrier is most of the rest, and it has to be declared. In one lineAt 1.0 MIU/g the ester is only about 55% of the powder, so identity needs the chromatogram, the hydrolysis products and the mass balance to agree. ## The four identity layers Each layer answers a different question, and each has a blind spot. A certificate can be truthful about a lot and still not prove the ester; a chromatogram can match the standard while the carrier is not the one declared. The four layers are useful only when they agree. Four layers of retinyl palmitate identity | Layer | Evidence | What it proves | What it does not prove | Documentary | Name, CAS 79-81-2, formula C36H60O2, COA, lot code, specification | The pack and the file share a lot code | That the powder is the named ester | Chromatographic | Retention time against a retinyl palmitate standard, co-injection, diode-array spectrum | The peak matches the palmitate standard | The carrier, the IU/g or the ester mass | Hydrolytic | Saponification, then identification of the fatty acid by GC | The ester carries palmitate, not acetate | The IU/g or the carrier proportion | Mass balance | IU/g converted to µg RE/g, compared with the ester mass and the carrier | The dilution matches the declared grade | Which ester the molecule is The HPLC should inject a retinyl palmitate reference beside the sample, on the same column and mobile phase, and compare the diode-array spectra near 325 nm. Without that reference and wavelength, a retention time proves little. Hydrolysis adds the second dimension: palmitic acid has sixteen carbons, and its methyl ester separates easily from the two-carbon acetate by GC. ## The IU-to-mass ratio as a check The IU is a unit of activity, not a mass. One microgram of retinol is defined as 3.33 IU, so 1.0 MIU/g is 300,000 µg of retinol equivalent per gram, or 300 mg/g. Pure retinyl palmitate is about 1.82 MIU/g, which means the 1.0 MIU/g grade contains about 55% ester by mass. At 1.1 MIU/g the ester is about 60%. The rest is the carrier, moisture and minor solids. That ratio separates the common esters. At the same IU/g, the palmitate carries about 1.6 times the ester mass of the acetate, so an acetate powder at 1.0 MIU/g is roughly 34% ester. If a lot declared as palmitate lands in the acetate range, ask for the explanation before accepting it. The ratio is a pointer, not a substitute for the chromatogram or the hydrolysis test. The numbers need one basis. A loss on drying of up to 5.0% makes a dried-basis assay read above the as-sold value. Put the IU/g, the moisture and the ester mass on the same basis, or the ratio will move for a reason unrelated to identity. ## Why a diffraction scan is not the primary test here X-ray diffraction is the identity workhorse for crystalline mineral salts, where the lattice gives a fingerprint. It is the wrong primary tool for this powder. The spray-dried matrix is largely amorphous, and the ester at roughly 55% may be dispersed rather than crystalline; crystalline sucrose, starch or a carrier salt can dominate the scan and describe the matrix rather than the vitamin. A clean diffractogram would not prove retinyl palmitate, and a noisy one would not disprove it. Diffraction still has a place as a screen for a crystalline adulterant or as a check on the carrier. It belongs beside the chromatographic and hydrolytic evidence, not in place of them. When the question is solid form rather than identity, ask for the reference pattern and the detection limit before reading a “match” statement. ## What substitution looks like Common retinyl palmitate substitutions and the tests that expose them | Substitution | What it changes | How to detect it | Retinyl acetate | Lower mass per IU; different label name | HPLC against both standards; hydrolysis and GC of the fatty acid | Beta-carotene | Different molecule and chromophore; no retinol on hydrolysis | HPLC with diode-array detection in the carotene region; hydrolysis | Dilution or low potency | IU/g below the declared grade | Assay plus mass balance against the ester and carrier | Free retinol or cis isomers | Oxidation marker; cis forms have lower activity | Chromatographic profile, retinol peak, stability data | Carrier substitution | Allergen, label and flow behaviour change | Carrier declaration, protein and carbohydrate tests, flow trial | Another fatty acid ester | Same retinol, different mass and hydrolysis product | Hydrolysis and GC of the fatty acid profile Beta-carotene is the substitution a single-wavelength assay misses most easily, because its absorption sits away from the retinoid maximum. A method that looks only at the retinoid wavelength can miss it. Ask the certificate to state the wavelength and the reference, and make the identity screen cover the carotene region too. ## Writing a specification that can be proved A line that says “vitamin A 1.0 MIU/g” is a potency target, not an identity specification. A usable line names retinyl palmitate and its CAS number, states the IU/g and the HPLC method, states whether the result is as sold or on the dried basis, names the carrier and its source, and adds loss on drying, mesh, heavy metals and microbiology. If an antioxidant is present, it belongs in the line too. - “Retinyl palmitate, CAS 79-81-2, C36H60O2.” - “Assay 1.0–1.1 MIU/g by HPLC with UV detection; state the basis.” - “Retinol equivalent 300,000–330,000 µg RE/g, calculated from the assay.” - “Identification by retention, UV spectrum and the palmitic acid released on hydrolysis.” - “Carrier named, with source and ratio; antioxidant declared if present.” - “Loss on drying ≤5.0%; ≥95% through 80 mesh; contaminants as listed.” - “No acetate, beta-carotene or other ester above the agreed limit.” ## Five questions for the supplier - Which ester is this lot, and which reference standard was used for the HPLC identity? - Was the sample saponified, and did the hydrolysis release palmitic acid? - What are the carrier identity and ratio, and is an antioxidant present? - On which IU basis was the lot released, and against which specification version? - Can you send the chromatogram, the hydrolysis data and a retained sample with the same lot code? Check the answers against the certificate, the pack label and the retained sample. The retinyl palmitate product page carries the catalog specification; the vitamin A page covers the acetate file; the analytical methods library describes the HPLC and GC work; the quality page covers release and retention. The compliance page lists the market documents. ### 01 What the COA for riboflavin 5-phosphate actually contains URL: https://nutrition.rainwoodbio.com/products/vitamins/riboflavin-5-phosphate/coa/ Reviewed: 2026-11-20 The certificate for a riboflavin 5-phosphate lot has to settle three things before the assay number means anything: which form was made, what the percentage is calculated on, and how much water the powder carries. The release panel is appearance, HPLC and UV identity, HPLC assay, loss on drying, pH, heavy metals, microbiology and particle size. The catalog sets the gates; the lot certificate reports the measured results. In one lineThe assay needs three anchors: the form on the certificate, the basis of the percentage, and the loss on drying that connects the two. ## Reading the release panel Start with the identification line. HPLC retention and the UV spectrum should match a flavin reference, and the method should separate riboflavin 5-phosphate from plain riboflavin and from the diphosphate. A certificate that says only “HPLC conforms” has not shown the separation. Then read the assay with the form and the moisture. The table lists the catalog gates; a lot certificate repeats them as limits and adds a measured result for each. Identity, assay, moisture and contaminants · riboflavin 5-phosphate | Parameter | Method | Release limit | Appearance | Visual | Yellow to orange-yellow powder | Identification | HPLC retention and UV spectrum | Conforms to the reference | Assay | HPLC with UV detection | ≥95.0%, basis and molecule stated | Loss on drying | Gravimetric | ≤8.0% | pH (1% solution) | Potentiometric | 5.0–6.5 | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh Appearance and pH are supporting lines. Yellow to orange-yellow is shared by the free acid, the sodium salt and a blend, so colour cannot carry identity. The pH of a 1% solution is a form-sensitive check, but it does not replace phosphorus or sodium. ## The percentage needs a form and a basis Riboflavin 5-phosphate can be reported as the phosphate or as riboflavin equivalent. It can be reported as-is or on the dried basis. Those are two independent choices, and the certificate should name both. The arithmetic is not small. At 95.0% as-is with 6.0% moisture, the dried basis is 101.1%; at 95.0% dried with the same moisture, the as-is figure is 89.3%. At the 8.0% moisture limit, 95.0% dried is 87.4% as-is. The assay and the loss on drying belong in adjacent columns, not at opposite ends of the page. The molecule matters too. 95.0% as riboflavin 5-phosphate is about 78.4% riboflavin equivalent. A certificate that reports 95.0% riboflavin for a phosphate lot has either converted the figure or described a different material; 95% as the phosphate and 95% as riboflavin cannot both describe the same powder. The specification should state the form, the basis and the molecule before the first lot is released. ## Limit, result and the difference Each line needs a limit and a measured result. A result column that repeats the limit is not a result; it is the gate copied into the wrong column. The table shows what belongs in each. What the result column should contain | Parameter | Release limit | Result column | Assay | ≥95.0% by HPLC, basis stated | The measured percentage, the basis and the method | Loss on drying | ≤8.0% | A measured percentage | pH | 5.0–6.5 | The measured pH and the concentration used | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot | Particle size | ≥95% through 80 mesh | The measured percentage through the sieve Microbiology needs a count plus an absence statement. Heavy metals need a figure per element, not a sum. Assay needs the measured percentage, the basis and the method. “Passes specification” is the conclusion; the numbers are the evidence. ## What changes from lot to lot Phosphorylation is the main batch-to-batch variable. The total assay can sit inside the window while the free riboflavin and diphosphate fractions move. The EU additive specification for the sodium salt (Regulation (EU) No 231/2012) puts limits on both; check the current text. If the buyer needs that profile, ask for the HPLC peak areas, not only the assay percentage. Moisture follows the drying step and the seal. Colour follows light and heat. Particle size follows the mill; 80 mesh is a finishing line, not a chemical one. The lot code should match the pouch, the drum and the retained sample. Read the lots as a series. A falling assay with a rising loss on drying is a storage signal. A new peak in the chromatogram is a process signal. ## When an outside test is worth ordering Order an outside test for a new source, a first shipment into a regulated market, a disputed form, or a label that names a grade the certificate does not support. The panel should separate the forms: HPLC with a photodiode array for the flavin and the phosphorylation profile, phosphorus by ICP-OES, sodium by ICP-OES, loss on drying, pH, ICP-MS for metals and the microbiological set. Phosphorus near 6.8% on the dried basis fits the mono-phosphate; sodium near 4.8% points to the sodium salt. Ask for the detection limit with every “not detected”. The sample tested should be the retained sample, and the report should identify the lot. When a result is contested, send the referee the retained sample, the supplier's certificate and the agreed specification, and frame the request around the tests that tell the free acid from the sodium salt — not another run of the same assay. ## What to put beside two quotations Compare the form and CAS number; the assay, its basis and the molecule; phosphorus and sodium; loss on drying; pH; and particle size. A match on “95%” with a different form or basis is not a match. Then compare traceability: manufacturer, phosphorylation route, drying and milling steps, specification revision. The catalog specification is on the riboflavin 5-phosphate product page; the parent nutrient is on the Vitamin B2 page. The tests that separate the forms are on the identity page; the market route is on the compliance page; the HPLC method is in the methods library; release is on the quality page. ### 02 Riboflavin 5-phosphate: free acid, sodium salt or plain riboflavin URL: https://nutrition.rainwoodbio.com/products/vitamins/riboflavin-5-phosphate/grades/ Reviewed: 2026-11-20 Riboflavin 5-phosphate is supplied as the free acid (CAS 146-17-8) or as the sodium salt (CAS 130-40-5), and both differ from plain riboflavin (CAS 83-88-5). The phosphate forms dissolve far more readily in water; the sodium salt carries about 4.8% sodium on a dry basis, and the free acid carries none. The grade decides the assay basis, the label name and the market file, not only the catalogue name. In one lineThe grade question is a form question first: riboflavin, the phosphate free acid and the phosphate sodium salt have different CAS numbers, solubility and label arithmetic. ## Why the phosphate form exists Plain riboflavin dissolves only sparingly, about 0.07 g/L at room temperature. Phosphorylation adds a phosphate group to the ribitol side chain and gives a molecule that dissolves readily. That is the practical reason the phosphate form appears in supplements and beverages: it can be dissolved at a concentration plain riboflavin cannot reach. The phosphate is not a different vitamin. The nutrient declared on the label is riboflavin; the phosphate is the source. The label arithmetic converts it back to riboflavin, and that conversion is where much of the confusion sits. Two phosphate forms are sold. The free acid is the parent phosphate; the sodium salt is the neutralised form. They have different CAS numbers, different molecular weights and different market entries. A purchase order that says “R5P” has named neither. ## The three forms side by side Riboflavin, riboflavin 5-phosphate free acid and the sodium salt | Property | Riboflavin | R5P free acid | R5P sodium salt | CAS number | 83-88-5 | 146-17-8 | 130-40-5 | Formula | C17H20N4O6 | C17H21N4O9P | C17H20N4NaO9P | Molecular weight | 376.37 | 456.34 | 478.33, anhydrous | Water solubility | Slightly soluble; about 0.07 g/L | Soluble in water | Soluble; about 1 g in 30 mL | Sodium content | None | None | About 4.8%, anhydrous | Riboflavin factor | 1.000 | 0.825 | 0.787, anhydrous | Label name | Riboflavin | Riboflavin 5-phosphate | Riboflavin 5-phosphate sodium The last row is the one that decides the paperwork. As of this review, the EU food-supplement Annex I (Directive 2002/46/EC) names riboflavin and riboflavin-5'-phosphate, sodium; the free acid is a different form. The USP and FCC monographs are written for the sodium salt. A free-acid lot can be a good material and still not be the grade that a pharmacopoeial or EU supplement file expects. Solubility numbers are approximate and depend on temperature and pH. The useful comparison is the order of magnitude: plain riboflavin is sparingly soluble, and both phosphate forms are much more soluble. The sodium salt is the more soluble of the two. ## Solubility, colour and handling The free acid is a yellow to orange-yellow powder, soluble in water, and the solution is yellow and slightly acidic; the catalog pH is 5.0–6.5 for a 1% solution. The sodium salt is also orange-yellow and more soluble. Both phosphate forms are hygroscopic; this catalog allows up to 8.0% loss on drying for the free acid. Light sensitivity is shared. The dry powder is more forgiving than the solution; in solution, light causes rapid deterioration. The pack has to be light-resistant and moisture-barrier for either form. A clear jar on a bench is not a storage container for this material. Particle size is a handling property. The catalog is ≥95% through 80 mesh. A granulated grade flows better and generates less dust; it is a different specification, not a different molecule. If the dosage form needs a coarser powder, say so before the order, because the sieve line changes. ## Dose arithmetic and the label The conversion factor from the free acid to riboflavin is 376.37 ÷ 456.34 = 0.8248. One milligram of riboflavin 5-phosphate free acid delivers 0.825 mg of riboflavin. The anhydrous sodium salt has a factor of 376.37 ÷ 478.33 = 0.7868; the dihydrate, which is the form in the EU additive specification, has 376.37 ÷ 514.36 = 0.7317. A label that declares 1.4 mg riboflavin, the EU NRV, needs 1.4 ÷ 0.8248 = 1.70 mg of the free acid, or 1.4 ÷ 0.7868 = 1.78 mg of the anhydrous sodium salt. A 10 mg free-acid dose delivers 8.25 mg riboflavin. The US Daily Value is 1.3 mg, so the same arithmetic applies with 1.3 in place of 1.4. None of these figures is a recommendation; they keep the label and the weigh-up consistent. The assay basis is a second conversion. A 95.0% assay on the dried basis is 87.4% of the powder as-is at 8.0% moisture. Apply the moisture first, then the molecular-weight factor, then the label. Missing a step is the usual error. ## What to write into the specification - “Riboflavin 5-phosphate free acid, CAS 146-17-8, C17H21N4O9P.” - “Assay ≥95.0% by HPLC, with the basis fixed and the molecule named.” - “Loss on drying ≤8.0%; pH 5.0–6.5 at 1% in water.” - “Identification by HPLC retention and UV spectrum; report free riboflavin and diphosphate.” - “Phosphorus about 6.8% on the dried basis, where the phosphate is to be confirmed.” - “Heavy metals, microbiology and particle size as listed; ≥95% through 80 mesh.” - “Destination market and form confirmed before the order.” If the order is for the sodium salt, the CAS number, formula, sodium line, assay and label all change. Do not carry this specification across. A written change control and a new certificate are the minimum. ## When the free acid is the wrong choice The free acid is the wrong choice when the destination file names the sodium salt, when the label declares the sodium salt, or when the formula needs the highest dissolved concentration. It is also the wrong choice when the buyer expects a USP or FCC monograph, because those monographs are written around the sodium salt. The sodium salt is the wrong choice when the sodium load matters or when the label names the free acid. The two are not interchangeable at the balance; a switch needs a new specification, a new certificate and a label check. The product hub carries the catalog specification; the riboflavin page covers the parent form; the level-four comparison takes the solubility and label questions further; the compliance page covers the market route; the methods library describes the HPLC work; the quality page covers release. ### 02.1 Riboflavin 5-phosphate vs riboflavin: solubility, assay and the label URL: https://nutrition.rainwoodbio.com/products/vitamins/riboflavin-5-phosphate/grades/riboflavin-5-phosphate-vs-riboflavin/ Reviewed: 2026-11-20 Riboflavin 5-phosphate is riboflavin with a phosphate group on the ribitol side chain. The group makes the molecule far more soluble in water and raises its molecular weight from 376.37 to 456.34, so 1 mg of the phosphate delivers about 0.825 mg of riboflavin. The two are different label ingredients even though they declare the same nutrient. In one lineThe phosphate group adds solubility and mass: 1 mg of riboflavin 5-phosphate delivers about 0.825 mg of riboflavin, and the label has to say which figure it declares. ## Two molecules, one nutrient Riboflavin is the parent molecule. Riboflavin 5-phosphate, also called flavin mononucleotide or FMN, carries a phosphate ester at the 5' position of the ribitol chain. The flavin ring is unchanged; the phosphate is the difference. That is why the two share the yellow colour and the UV spectrum but not the solubility or the molecular weight. The CAS numbers are separate: 83-88-5 for riboflavin, 146-17-8 for the free acid, 130-40-5 for the sodium salt. A specification that names one does not cover the other. The nutrient on the label is riboflavin in both cases; the ingredient statement names the source. The phosphate form is not a more concentrated riboflavin. It is heavier, so the same mass carries less riboflavin. The direction of the conversion matters: multiply the phosphate mass by 0.825 to get riboflavin, not the other way round. ## Solubility: the practical reason for the phosphate Riboflavin dissolves only sparingly, about 0.07 g/L at room temperature. That limits it in beverages and in any liquid concentrate: it can be suspended, but not dissolved at a useful concentration. The phosphate group makes the molecule soluble; the catalog describes the free acid as soluble in water, with a yellow, slightly acidic solution. The sodium salt is more soluble again. The USP/FCC description gives about 1 g in 30 mL of water. That is why the sodium salt is the common choice for liquid formats and why the free acid is often used where the sodium load or the market entry points that way. Solubility is not the same as stability. The solution is photolabile and the phosphate ester can hydrolyse; a dissolved form is the least stable format. The formulation has to protect the solution, not only dissolve it. ## Assay: the percentage needs a basis and a molecule The catalog minimum is ≥95.0% by HPLC. A percentage without a basis is not a specification. The loss on drying can be up to 8.0%, so the as-is and dried figures can differ substantially. At 95.0% as-is and 6.0% moisture, the dried basis is 101.1%; at 95.0% dried and the same moisture, the as-is figure is 89.3%. The figure also has to say which molecule it is calculated as. 95.0% as riboflavin 5-phosphate is 78.4% riboflavin equivalent. A certificate that reports 95.0% “riboflavin” on a phosphate lot has either converted the number or described a different material. The two cannot both be right. The specification should fix three things: the form, the basis and the molecule. The certificate should print all three next to the result. Without them, two suppliers can agree on “95%” and ship different powders. ## The conversion to the label The factor from the free acid to riboflavin is 376.37 ÷ 456.34 = 0.8248. The factor from the anhydrous sodium salt is 376.37 ÷ 478.33 = 0.7868; the dihydrate is 376.37 ÷ 514.36 = 0.7317. Use the factor for the form on the certificate, not a generic one. A label that declares 1.4 mg riboflavin, the EU NRV, needs 1.70 mg of the free acid or 1.78 mg of the anhydrous sodium salt. A 10 mg free-acid dose delivers 8.25 mg riboflavin. The US Daily Value is 1.3 mg; the same arithmetic applies. None of these figures is a recommendation. Apply the moisture first, then the molecular-weight factor, then the label. A 95.0% assay on the dried basis at 8.0% moisture is 87.4% as-is; the label arithmetic starts from the as-is mass. Missing the moisture step overstates the riboflavin by the moisture content. ## Stability follows the form Both molecules are photolabile, and both need a light-resistant, moisture-barrier pack. The phosphate is more hygroscopic than riboflavin; the catalog allows up to 8.0% loss on drying, against 1.5% for the riboflavin record. An opened pouch takes moisture, and the as-is assay falls. In solution, the phosphate ester can hydrolyse back to riboflavin, and light degrades the flavin at every pH. The solution is most stable near neutral pH; acid conditions speed hydrolysis. A phosphate in a beverage is not automatically more stable than riboflavin; it is more soluble, and the matrix decides the rest. Neither form should be called stable without the pack, the matrix and the time. The stability page sets out the protocol. ## What the label has to say In the EU, as of this review, the food-supplement Annex I (Directive 2002/46/EC) names riboflavin and riboflavin-5'-phosphate, sodium. The free acid is not the named sodium form. The label must match the form the market file covers, and the nutrient declaration is riboflavin in mg and %NRV; the ingredient list names the source. In the US, the Supplement Facts panel declares riboflavin, and the ingredient statement names the phosphate. The Daily Value is 1.3 mg. Structure/function language is reviewed separately, with substantiation and the DSHEA disclaimer; no disease claim is open. Write the form into the label and the specification, not only into the purchase order. A label that says “riboflavin” while the batch is a phosphate is not wrong about the nutrient, but it is incomplete about the source. A label that says “riboflavin 5-phosphate” while the market file covers only the sodium salt is a different problem. ## When to choose which Choose riboflavin when the formula is a solid with low water activity, when the label calls for plain riboflavin, or when the analytical method and the market file are built around it. It is the simpler ingredient: one molecule, no phosphate ester to hydrolyse, and a lower moisture limit. Choose riboflavin 5-phosphate when the formula needs dissolved riboflavin at a concentration plain riboflavin cannot reach, or when the label and the market file name the phosphate. Choose the sodium salt when the file names the sodium salt or when the highest solubility is needed; the sodium load and the conversion change. Switching in either direction needs a new specification, a new certificate, a new conversion and a label check. The phosphate group is not a unit conversion applied at the balance. The product hub carries the catalog specification; the grades page places this comparison in the wider range; the riboflavin page covers the parent form; the compliance page covers the market entries; the methods library describes the assay; the quality page covers release. ### 03 Riboflavin 5-phosphate stability: light, moisture and the pack URL: https://nutrition.rainwoodbio.com/products/vitamins/riboflavin-5-phosphate/stability/ Reviewed: 2026-11-20 Riboflavin 5-phosphate takes up moisture and loses colour and assay under light. A sealed, opaque pack held at controlled humidity is the stable format for the powder; a water-based solution is the least stable, since light, oxygen, heat and pH act together and the phosphate ester can hydrolyse back to riboflavin. Any shelf life has to be tied to a named pack and storage condition. In one lineThe phosphate improves solubility, not light stability: the powder needs a moisture barrier and the solution needs a dark, validated hold. ## The powder: moisture, light and colour The catalog allows up to 8.0% loss on drying. That is a release gate, not a storage allowance. The phosphate form is more hygroscopic than plain riboflavin; an opened pouch takes moisture from the air, the as-is assay falls and the powder can cake. Keep the foil pouch closed, or transfer the remainder to a smaller opaque container. The dry powder is less sensitive to light than the solution, but it is not light-proof. Yellow to orange-yellow can darken or brown at the surface after exposure. The pouch is the barrier; a clear jar on a bench is not. The USP/FCC description of the sodium salt makes the same point: the dry material is not affected by diffused light, while its solution deteriorates rapidly. Heat accelerates both moisture pickup and colour change. Ambient warehouse temperature is usually acceptable for the sealed pack; a hot loading bay or a car boot is not. Let a cold pack equilibrate before opening, so condensation does not form on the powder. ## The solution: the least stable format The free acid dissolves in water to give a yellow, slightly acidic solution; the catalog pH is 5.0–6.5 for a 1% solution. In solution the phosphate ester is most stable near neutral pH. Acid conditions hydrolyse it to riboflavin, and alkaline conditions attack the ribitol chain; light degrades the flavin at every pH. The practical window is narrow, and the catalog pH sits inside it. Light is the fastest failure mode. A clear bottle on a bench, a window display or a transparent inline sight glass is an exposure. Use amber or opaque vessels, short hold times and a validated light-protection step. The dry powder can tolerate ordinary handling light for longer than the solution can. Heat and oxygen add to the load. A hot-fill or pasteurisation step is a heat exposure the powder never sees. If a liquid is unavoidable, control dissolved oxygen, validate the hold time before filling, and measure the finished matrix rather than transferring a bulk result. ## What drives degradation Factors that move riboflavin 5-phosphate during storage | Factor | What it does | Control | Light | Photodegradation; colour and assay change | Opaque or foil pack; dark hold | Moisture | Hygroscopic pickup; the as-is assay falls | Sealed pouch; desiccant where needed | Heat | Accelerates hydrolysis and colour change | Controlled store; cool process | pH | Acid hydrolysis; alkaline ring cleavage | Buffer near neutral; validate the matrix | Oxygen | Oxidation in solution | Low headspace; deaerate | Time in solution | Hydrolysis and light exposure accumulate | Short hold; make fresh where possible These factors are not independent. A warm, bright, high-pH hold combines chemical degradation with photodegradation. The useful question is not “is riboflavin 5-phosphate stable?” but “stable in which pack, at which pH, for how long?” ## A stability protocol for the ingredient A protocol that can support a retest period names four things: the pack, the storage condition, the pull points and the tests run at each one. Warehouse behaviour needs 25 °C/60% RH long-term and 30 °C/65% RH intermediate; 40 °C/75% RH accelerated storage loads the pack beyond that. Add a light-exposure arm built on the standard photostability design, because a dark incubator cannot reproduce the colour and assay loss this molecule shows under light. Test assay, loss on drying, pH, appearance, identity and microbiology at each point. For the phosphate, add free riboflavin and diphosphate by HPLC, so the assay is not the only number. When the application is a beverage or a stick pack, run the same panel in the finished matrix at the real process pH and heat load. Report the individual results, not only a pass statement. Ask for the stability summary for the pack you will buy. A 1 kg pouch and a 25 kg drum have different headspace and different opening histories; the data belongs to the pack. ## The finished formula changes the answer A capsule or tablet runs at low water activity, yet the fill still pulls moisture and the shell can pass it. Measure loss on drying at release and again after storage, and leave the bulk pouch sealed while the batch runs. A stick pack usually fails at the seal: one pinhole is sufficient, so the strip has to be checked together with the powder. Neither format can borrow the shelf life of the bulk pack. A beverage puts pH, heat, light and dissolved oxygen on the same molecule at once. Bulk-powder data is only the baseline for that system, not a prediction of it. Whether to use an overage belongs to the formulator and to the label, and no overage compensates for a pack that still admits light or moisture. Colour is part of the product. A shift from yellow to brown is a visible signal that the light or heat load has been too high, even when the assay still passes. Read a colour change as a reason to test, not as a reason to reject on sight. ## How the shelf life is set There is no single shelf-life figure for riboflavin 5-phosphate apart from a pack and a storage condition. The retest period written on the specification should be the one the stability file supports for that exact pack. A figure quoted without pack, condition and test panel is an assertion, not a shelf life. Once the retest period ends, re-assay the retained sample before any extension; do not extend on assumption or copy a bulk figure onto a repacked container. Packs and their standard sizes are listed on the product hub; release testing is on the COA page; ordering packs and lead time on the MOQ page; the assay is described in the methods library; the release workflow is on the quality page; the parent nutrient is covered by the Vitamin B2 page. ### 04 Riboflavin 5-phosphate: MOQ, packs and ordering URL: https://nutrition.rainwoodbio.com/products/vitamins/riboflavin-5-phosphate/moq/ Reviewed: 2026-11-20 The minimum order for riboflavin 5-phosphate is 1 kg, packed as a 1 kg foil pouch; the bulk pack is a 25 kg fiber drum. Standard packs leave within 1–7 days. To turn that into a firm quotation, we need the form and CAS number, the assay basis, quantity and pack, destination and Incoterm, documents, and the intended market. In one lineOne kilogram is the minimum because it is the smallest pack that can be sampled, tested and traced as a lot. ## Why the minimum is 1 kg One kilogram is enough for a bench trial, a retained sample and an independent identity check. It also ships as a parcel, which helps when a formulator needs material before the production plan is fixed. Each pack carries a lot code; it is not a scoop from a drum. Ordering under a kilogram means someone opens a larger lot and repacks a portion. The chemistry does not change, but the pack identity does: extra handling, a new container and a traceability chain that no longer runs back to the original drum. The 25 kg fiber drum spreads handling over more material and ties up more inventory for longer. The minimum is set by what can be packed, labelled and traced as one lot, not by a volume target. ## Packs and formats Standard riboflavin 5-phosphate packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Light and moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Particle profile changes | Dilution | On request | Lower assay per gram | Carrier and label change The catalog material is milled to 80 mesh, with at least 95% passing that sieve. A granulated or diluted grade is a new specification with its own particle profile or assay, not another way to fill the same pouch. Tell us before the quotation if the tablet press or blender needs a coarser or more free-flowing powder: the sieve line, the bulk density and sometimes the lead time all move with that request. ## Lead time and dispatch A standard pack is dispatched within 1–7 days of order confirmation. That clock covers picking, paperwork and handover to the carrier, not transit, customs or the buyer's own release. A custom granulation, a dilution or an unusual pack size takes longer, and the quotation should show that extra time as a separate line. Confirm the dispatch date rather than accepting the range. A single pouch normally goes as a parcel, while a drum moves on a pallet. The Incoterm assigns freight booking and entry clearance to one side, so name it early. Lot documents should be in the same shipment as the material, not sent afterwards. ## What a quotation needs Six items make a quotation firm enough to compare: - Product and form. Riboflavin 5-phosphate, CAS 146-17-8, with the free acid or the sodium salt written out. - Specification. Assay and basis, loss on drying, pH, particle size, metals, microbiology, phosphorus and sodium where the form is to be confirmed. - Quantity and pack. A 1 kg pouch or a 25 kg drum; granulated or diluted variants are quoted separately. - Destination and Incoterm. Country plus port or delivery address, and the trade term that applies. - Documents. Lot COA, TDS, SDS, allergen and GMO declarations, origin record and any statement the importer requires. - Intended use and market. Whether the material goes into a supplement, a food or another application, and where it will be sold. A quotation without the form and the market is incomplete. The same powder can fit one destination and sit outside the file for another. Commercial terms are stated on the quotation, not on this page. ## The sample is a lot, not a demonstration Use the 1 kg pouch as the qualification lot. Before scale-up, run identity, assay, loss on drying, pH, microbiology and phosphorus on it, and keep a portion of the same pack as the retained sample. Sample, COA and quotation should all show one lot code. Material that cannot be tied back to a lot is a demonstration, not a qualification. A sub-kilogram bench trial is a repack, whatever the label on the bag says. The material comes out of a bulk lot, is handled again and gets a handling record of its own, so it is not the 1 kg foil pack from the catalog. Get the split documented and keep the resulting lot code beside the trial data. The trial powder and the powder in the production drum need not come from the same lot, even when both meet one specification. ## Terms to settle before the first order Commercial and quality terms belong on one quotation: Incoterm, pack, dispatch window, specification revision, a COA for each lot, retained sample, retest period and the change-control route. Put them into a quality agreement before the first production order; reopening the same points after a dispute costs more for both sides. When a lot falls outside the agreed specification, the evidence starts with the retained sample and a joint re-test using the method named in the specification; a photograph of the drum settles nothing. The quality agreement should name the referee laboratory both sides will accept and who carries its cost. A return argued from appearance alone is difficult to defend on either side. Catalog specifications sit on the product hub; the COA page sets out release tests; packing and storage are on the stability page; the assay is described in the methods library; release is covered by the quality page; shipping and documents are on the logistics page; the Vitamin B2 page covers the parent form. ### 05 The regulatory file for riboflavin 5-phosphate URL: https://nutrition.rainwoodbio.com/products/vitamins/riboflavin-5-phosphate/compliance/ Reviewed: 2026-11-20 Riboflavin 5-phosphate is sold as the free acid (CAS 146-17-8) or the sodium salt (CAS 130-40-5). The EU food-supplement Annex I and the E 101(ii) additive specification are written around riboflavin-5'-phosphate, sodium; a free-acid lot is a different entry question. The buyer's regulatory team confirms the route for the destination, and this page lists the documents and checks that belong in the file. In one lineThe file has to answer one question before the limits: is the material the free acid or the sodium salt, and which entry does the destination name? ## What the file contains A riboflavin 5-phosphate file holds four records: the current specification for the free acid or the sodium salt, the certificate that released the lot, the contaminant and label rules for the finished dose, and the change history for source, process and pack. The COA covers one lot, the TDS describes the specification and the SDS covers handling; none decides which market entry the destination accepts. Put the form and CAS number on the first page of the file. The free acid and the sodium salt have different CAS numbers and different molecular weights, and only the sodium salt is named in the EU supplement Annex I. A file that says only “riboflavin 5-phosphate” has left the first question open. The pack also has to carry the allergen and GMO statements, the origin record, the residual-solvent statement and any declaration the customer's market requires. When one of these is absent for the lot, identify it while the quotation is open. A missing document is far easier to obtain before dispatch than after the container reaches port. ## European Union The EU food-supplement route sits on Directive 2002/46/EC. Annex I lists the vitamin forms that may be used, and for vitamin B2 it names riboflavin and riboflavin-5'-phosphate, sodium. The free acid is not the named sodium form. That is a form question for the buyer's regulatory team, not a conclusion this page can make for a destination. The additive side is separate. The colour additive group is E 101: riboflavin is E 101(i) and riboflavin-5'-phosphate is E 101(ii) in Regulation (EC) No 1333/2008; the specifications in Regulation (EU) No 231/2012 describe the sodium salt, with the formula C17H20N4NaO9P·2H2O. The additive entry is a colour route, not a supplement vitamin route. Do not cite E 101(ii) as the supplement authorisation. Labelling follows Regulation (EU) No 1169/2011: riboflavin is declared in mg and as a percentage of the 1.4 mg NRV. Contaminants follow Regulation (EU) 2023/915. Check the current consolidated text; the entries and the limits are amended from time to time. ## United States In the US, the question is how the ingredient is positioned in a dietary supplement and whether the finished product's labeling fits that position. Riboflavin is an essential vitamin with a Daily Value of 1.3 mg; the Supplement Facts panel declares riboflavin, and the ingredient statement names the source. The phosphate form is not declared as the nutrient itself. Whoever places the ingredient in the supplement names the legal basis and the document behind it; the buyer then checks that the same basis reaches the finished product and its claim. A structure/function statement stands on its own substantiation and the DSHEA disclaimer. Certificate review stops at the material, and no label or claim sign-off is included. This page asserts no NDI status for either form. ## United Kingdom Great Britain runs a separate supplement and labelling regime, while Northern Ireland stays inside the EU framework, which includes Annex I of Directive 2002/46/EC. Which one governs depends on the delivery address. The buyer's regulatory team should record that choice on the order, so the label wording and the entry cited can be audited later. Because the EU entry names the sodium salt, a free-acid lot should not be assumed to travel under it into Northern Ireland. The same question goes to the Great Britain file, which has its own list. Confirm before the pack is labelled, not after it is shipped. ## Contaminants and limits Contaminant compliance is worked out on the finished dose, not on the drum alone. The table below gives a starting point for a food-supplement file; the destination's current text and the daily dose set the final limit. Contaminant limits to confirm for the finished product | Parameter | Reference to confirm | What the file should show | Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method, limit and the finished-product calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception that applies | Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result and method | Arsenic (As) | Customer or market limit | The agreed limit and the method, stated on the certificate Convert the lot result to the finished product before comparing it with the limit. A drum result and a capsule result are different numbers, and a limit that is met in the powder can be missed in the dose. Record the calculation in the file. ## Claims and the label In the EU, the authorised riboflavin claims are on the Register under Regulation (EC) No 1924/2006. The label may use only the authorised wording for the nutrient, and the wording is tied to the nutrient, not to the phosphate form. This page itself makes no health claim. In the US, a structure/function statement needs substantiation and the DSHEA disclaimer. No disease claim is open in either market. A certificate supports the material, not the claim; a claim revision never reopens the specification. Keep the claim file separate from the specification file. A change to the claim wording does not change the assay, and a change to the form does not automatically carry the claim. The riboflavin page covers the parent nutrient; this page covers the phosphate source. ## Documents for the file The buyer's file needs the COA with the HPLC assay and its basis, the HPLC/UV identity, loss on drying, pH, the metal panel and the micro count. Add phosphorus by ICP-OES to confirm the phosphate, and sodium by ICP-OES if the sodium salt is the form. The specification must name the form and the basis; an as-is figure and a dried figure are not interchangeable. Add the TDS, SDS, allergen and GMO statements, the origin record, the residual-solvent statement, the stability summary for the pack and the market statement for the destination. If the EU supplement route applies, the file should record why the form matches Annex I or what the buyer's team decided. The product hub carries the catalog specification. ## Checklist before the first order - The specification revision, CAS number and named form sit on one sheet. - COA, TDS, SDS, allergen and GMO declarations, origin and residual-solvent statements are on file. - Phosphorus, and sodium where the salt is claimed, back the declared form. - Metal results are converted to the finished dose before the limit check. - Destination label and claim wording have had a regulatory review. - Source, process and pack changes run through change control. - Quotation, specification and certificate cite the same revision. The quality page describes the release file; the identity page covers the analytical evidence; the methods library gives the test references. ### 06 How we prove a riboflavin 5-phosphate lot is the phosphate URL: https://nutrition.rainwoodbio.com/products/vitamins/riboflavin-5-phosphate/identity/ Reviewed: 2026-11-20 Four lines have to agree before a lot can be called riboflavin 5-phosphate: the documents name the form and CAS number, HPLC retention and the UV spectrum match a flavin reference, phosphorus sits near the theoretical 6.8% on the dried basis, and moisture plus assay close the mass balance. An assay figure by itself cannot distinguish the phosphate from plain riboflavin, or the free acid from the sodium salt; the phosphorus and sodium results do that. In one lineIdentity is the agreement of four measurements: the document, the flavin by HPLC and UV, the phosphorus that proves the phosphate, and the mass balance that proves there is no dilution. ## The four identity layers A certificate can carry the correct name and CAS number and still leave the powder unproven. Each row in the table below tests a separate claim — what the document says, which flavin the column detects, whether phosphate is present, which counter-ion sits with it, and whether the numbers balance — so each row needs its own result. A supplier who stops at the first row has sent paperwork, not evidence about the drum. Four layers of riboflavin 5-phosphate identity | Layer | Question | Test | What it proves | Document | Is the form named? | Name, CAS number, formula | Paperwork only | Chromatography | Is the flavin the right one? | HPLC retention and UV spectrum | The flavin, not the phosphate | Phosphate | Is the phosphate present? | Phosphorus by ICP-OES | The phosphate ester | Counter-ion | Free acid or sodium salt? | Sodium by ICP-OES | The salt form | Mass balance | Is it diluted? | Assay, loss on drying, impurities | Consistency of the numbers The mass-balance layer is the one buyers skip. An assay of 95.0% with 8.0% moisture and a high impurity load leaves less room for the active than the percentage suggests. The numbers have to add up to a plausible powder. ## HPLC and UV: proving the flavin A usable HPLC method for this material states the column, mobile phase, detection wavelength and reference standard, not just “HPLC”. Retention time alone is one coordinate; the UV spectrum is the other, and a peak at the expected minute can belong to riboflavin, to the diphosphate or to a degraded standard. The method should also resolve riboflavin 5-phosphate from plain riboflavin, because the two are different molecules with different retention behaviour. Ask for the chromatogram, not only the percentage. The phosphate profile matters: free riboflavin and riboflavin diphosphate are process-related forms, and a lot can meet the total assay while carrying more of one of them. The EU additive specification for the sodium salt (Regulation (EU) No 231/2012) sets limits on both; check the current text. A buyer who needs that profile should see the peaks. UV detection is standard for flavins. The certificate's “HPLC and UV conform” is a conclusion; the chromatogram and the spectrum are the evidence behind it. ## Phosphorus and sodium: proving the form The free acid has one phosphorus per molecule. The theoretical phosphorus content is 30.97 ÷ 456.34 = 6.79% on a dry basis. A result near that figure, with a 95% assay, is consistent with the mono-phosphate. A low phosphorus result points to plain riboflavin or a dilution; a high result points to riboflavin diphosphate or a different phosphate. The sodium salt has one sodium per molecule: 22.99 ÷ 478.33 = 4.81% on an anhydrous basis, or 4.47% for the dihydrate. The free acid should show no sodium beyond the method's limit. A sodium result near 4.8% points to the sodium salt, not the free acid, whatever the label says. The molecular-weight ratio is the third number: 376.37 ÷ 456.34 = 0.8248 for the free acid, and 376.37 ÷ 478.33 = 0.7868 for the anhydrous sodium salt. The ratio connects the assay to the label. It does not prove identity on its own, but a ratio that does not close is a signal. ## X-ray diffraction: the solid-state check X-ray diffraction looks at the solid, not the solution: it asks whether the powder is crystalline and whether the diffraction pattern matches a reference material. That makes it useful for spotting an amorphous dilution or comparing a new source with an established lot. It says nothing about how much phosphate or sodium the molecule carries, so it supports identity rather than replacing the wet tests. Request the reference pattern and the limit of detection before accepting a “match” statement. XRD is not a routine release test for this product. For a disputed lot, XRD plus phosphorus plus HPLC/UV is stronger than any one of them. ## What adulteration looks like A common substitution is plain riboflavin, because it shares the colour and the flavin chromophore. Another is a phosphate blend with more diphosphate, which raises the phosphorus figure while the total assay still passes. A third is the sodium salt sold as the free acid. Common riboflavin 5-phosphate substitutions and the signals | Adulterant | What it does | Signal | Test | Plain riboflavin | No phosphate; shares the colour and spectrum | Phosphorus near zero; separate HPLC peak | Phosphorus by ICP-OES; HPLC/UV | Riboflavin diphosphate | More phosphate per flavin | Phosphorus above 6.8%; extra peak | Phosphorus; HPLC | Sodium salt sold as free acid | Sodium present; the label names the free acid | Sodium near 4.8% | Sodium by ICP-OES | Dilution | Lowers assay and phosphorus | Assay low; loss on drying high | Mass balance; phosphorus | Dye | Matches colour, not the spectrum | Colour without a UV match | UV spectrum; HPLC Colour is the weakest signal. Yellow to orange-yellow covers a wide range, and a dye can reproduce it. The stronger signals are phosphorus, sodium and the chromatogram. A certificate that reports appearance and assay but not identity has left a likely substitution untested. ## How to write the identity into the specification - “Riboflavin 5-phosphate free acid, CAS 146-17-8, C17H21N4O9P.” - “Assay ≥95.0% by HPLC; the basis and the molecule are stated.” - “Loss on drying ≤8.0%; pH 5.0–6.5 at 1% in water.” - “Identification by HPLC retention and UV spectrum; report free riboflavin and diphosphate.” - “Phosphorus 6.8% within a stated range, on the dried basis.” - “Sodium not more than the stated limit for the free acid; report the result.” - “Particle size ≥95% through 80 mesh; metals and microbiology as listed.” - “Destination market and form confirmed before the order.” ## Five questions for the supplier - What form is this lot, and what CAS number appears on the certificate? - Will you send the HPLC chromatogram and the UV spectrum alongside the assay result? - What phosphorus result was obtained, and on what basis? - What sodium figure was measured, and by which method? - What are the lot's free riboflavin and diphosphate figures? Taken together, the five answers form an identity file that a single assay figure cannot replace. The product hub holds the catalog specification, while the COA page maps each figure onto the certificate. Form differences are set out on the grades page, and the riboflavin page covers the parent nutrient. Label consequences are handled in the level-four comparison, the separation is explained in the methods library, and the quality page covers release. ### 01 What the COA for sodium ascorbate actually contains URL: https://nutrition.rainwoodbio.com/products/vitamins/sodium-ascorbate/coa/ Reviewed: 2026-11-20 A sodium ascorbate certificate reports appearance, IR and titration identity, iodometric assay, pH of a 10% solution, loss on drying, heavy metals, microbiology and particle size. Each line should carry its method, limit and measured result. The catalogue assay is 99.0–101.0%, but that figure describes the salt only when pH and identification agree with it. In one lineThe assay is a titration expressed as the sodium salt on the dried basis, and the pH, loss on drying and identification are what separate this salt from ascorbic acid. ## The certificate as a test report A certificate earns its place when a reviewer can audit it line by line. Every parameter needs three things: the measurement, the method behind it, and the release limit it was judged against. A row that says only “conforms” records a conclusion and withholds the evidence. The identification line decides whether the material is the ascorbate salt; the assay line decides how much is present. A certificate that reports the assay without the pH has left the salt question partly open. Release panel · catalogue specification, sodium ascorbate | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | IR and titration | Conforms to the reference | Assay (as C6H7NaO6, dried basis) | Iodometric titration | 99.0–101.0% | pH (10% solution) | pH meter | 6.5–7.5 | Loss on drying | Gravimetric | ≤0.5% | Heavy metals | ICP-MS | Lead ≤3, arsenic ≤2, cadmium ≤1, mercury ≤0.1 mg/kg | Microbiology | Plate count and absence tests | Aerobic plate count ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella not detected | Particle size | Sieve analysis | 95% or more passes 80 mesh ## Dried basis, the titration and the HPLC result The assay is a mass fraction of C6H7NaO6, and the titration is the method behind it. Iodine oxidises the ascorbate to dehydroascorbic acid; each millilitre of 0.1 N iodine is equivalent to 9.905 mg of sodium ascorbate. The sample is dissolved in carbon-dioxide-free water with sulfuric acid and titrated at once. The result is normally calculated on the dried basis, and the certificate should say so. The catalogue sets loss on drying at ≤0.5%, so a lot that reads 99.5% dried and carries 0.4% water is 99.1% as-is. That arithmetic matters when the label or the fill weight is built on the powder as weighed. The titration measures reducing power, not the intact molecule. Dehydroascorbic acid no longer consumes iodine, and any other reducing substance in the sample is counted as if it were ascorbate. HPLC answers the other question: it separates ascorbic acid from dehydroascorbic acid and related substances. The catalogue method names titration and HPLC together, so the certificate should say which result belongs to which method. An HPLC result is expressed as ascorbic acid; multiply by 1.125 to express it as sodium ascorbate. The catalogue identification is IR against a reference plus a titration; neither counts sodium, so the salt claim rests on pH and a sodium result. ## Release limit versus batch result A release limit is the boundary; a batch result is what the laboratory measured. Both belong on the certificate, with the method beside them. A result column filled with the range is a copy of the gate, not a result. What the result column should contain | Parameter | Release limit | Result column | Assay | 99.0–101.0% dried basis | A measured percentage, with the titre, standard and basis | pH | 6.5–7.5 at 10% | The measured pH, with concentration and temperature | Loss on drying | ≤0.5% | A measured percentage | Heavy metals | Per element | One measured value per element, in mg/kg | Microbiology | Count plus absence | A plate count and the absence finding for this lot | Particle size | ≥95% through 80 mesh | The percentage that passed the sieve, as measured “Passes specification” is a conclusion. The reader should be able to reach it from the figures: the titration volume and standard, the pH concentration and temperature, the measured loss on drying, one figure per element, and a count plus an absence statement. The catalogue is not the pharmacopoeia: as of this review, the USP monograph sets pH 7.0–8.0 at 1 in 10 and loss on drying ≤0.25%; the catalogue ranges here are 6.5–7.5 and ≤0.5%. A lot can meet the catalogue and miss the monograph. A buyer releasing against the monograph should say so; the specification then carries the narrower window. ## What moves between batches The neutralisation and crystallisation steps move the pH and the loss on drying. Drying moves the water figure; milling and sieving move the particle-size result. The 80 mesh limit is a finishing cut: a new mill or a different sieve can shift that result while the chemistry stays the same. Colour is the least quantitative line. White to off-white covers a wide range, and a cream or yellow tint can be the first sign of oxidation while the assay is still inside the range. A noticeably darker batch is a reason to ask for the chromatographic result, not to reject on sight. A trend across lots says more than one result near an edge. Assay drifting low with the pH steady points to dilution; pH drifting low with the assay steady points to residual acid or a blend; loss on drying climbing points to the pack or the store. The certificate's lot code should tie the pouch, the drum and the retained sample to one another. ## When to order an outside test An outside test is worth ordering when a source is new, when the first shipment enters a regulated market, when a salt-form claim is not supported by the supplier's certificate, or when a result is disputed. The panel should go beyond a copy of the release sheet: IR, titration and HPLC, pH, loss on drying, sodium by ICP-OES, the metal panel, microbiology and, where the isomer is a risk, specific rotation. Add X-ray diffraction if solid form matters, and a chloride or ash check if another sodium salt is suspected. Ask for each screen's detection limit; a “not detected” line without one says more about the method than the sample. Keep the chain of custody intact: the material tested must be the material retained, and the report has to name the lot. If a result is contested, hand the referee the retained sample, the certificate and the specification, and ask for the discriminating tests rather than another titration. ## What to compare between suppliers Put six lines side by side: form and CAS number; assay result and basis; pH; loss on drying; sodium or rotation; metals, microbiology and particle size. Two quotations that agree on 99.5% and differ on the basis or the pH are not describing the same powder. The second layer is traceability: who made the lot, which neutralisation and drying steps were used, and whether the lot code matches the pack. The catalogue specification sits on the sodium ascorbate product page. The tests that separate the salt from the acid are on the identity page; the grade options are on the grades page; the market framework is on the compliance page; the chromatographic method is described in the HPLC method note; the release workflow is on the quality page. ### 02 Sodium ascorbate grades: mesh, granulation and release basis URL: https://nutrition.rainwoodbio.com/products/vitamins/sodium-ascorbate/grades/ Reviewed: 2026-11-20 Sodium ascorbate is supplied as an 80 mesh powder, a granulated powder and, on request, a finer powder. All three are the same salt, CAS 134-03-2, with the same 99.0–101.0% assay on the dried basis; the grade is fixed by particle size, flow, bulk density and dust. The compendial question is separate: a catalogue grade and a pharmacopoeial grade can share the chemistry and differ on pH and loss on drying. In one lineA grade is a physical specification plus an assay basis: mesh, flow, moisture limit and the release method decide whether the same salt fits a capsule, a stick pack or a blend. ## One salt, several physical grades The molecule is fixed; the powder is not. Crystallisation, drying and milling decide the particle-size distribution, and the distribution decides how the powder moves. A capsule filler wants flow and a consistent bulk density; a stick pack wants low dust and quick dissolution; a tablet wants a compressible granule; a dry blend wants particles that do not segregate away from the other actives. The assay, pH and moisture limits stay the same between those physical grades unless the buyer asks for a different release specification. What changes is the behaviour in the plant, and that is what a line trial is testing. The other axis is the release specification. The catalogue is a commercial specification; a pharmacopoeial monograph is a separate document with its own pH and loss-on-drying windows. A buyer who needs the monograph should say so before the quotation, because the two are not interchangeable at release. ## The grades side by side Sodium ascorbate grades and what changes in the plant | Grade | Particle size | Flow and dust | Typical use | What to check | Standard powder | ≥95% through 80 mesh | Free-flowing; some dust | Capsules, tablets, dry blends | Mesh, bulk density, loss on drying | Granulated | Coarser, agreed on request | Low dust; good flow | Stick packs, tableting, blends | Granule size, friability, dissolution | Fine powder | Finer cut, agreed on request | Dust and static | Liquid mixes, coatings | Dissolution, dust control | Compendial grade | Same physical options | As above | Markets requiring a monograph | pH 7.0–8.0, loss on drying ≤0.25%, method Read the table by column. The particle size decides the flow and the dust; the use column names the common fit; the last column lists the lines that change when the grade changes. A granulated grade is not a higher grade, and a fine powder is not a purer one. ## What changes in the drum Particle size is the first physical line. The standard grade passes 80 mesh, which is coarse enough to flow and fine enough to dissolve in a stick pack. A granulated grade builds those crystals into larger agglomerates; it flows better and makes less dust, but it dissolves more slowly and its bulk density is different. Bulk density and flow are not on the catalogue certificate, yet they decide whether a capsule filler runs at speed or the fill weight drifts. Ask for them when the process is sensitive. Dust is the third line: a fine powder dissolves fastest and is the hardest to handle, and static can make it cling to the blender wall. Moisture behaves the same way in every grade. Sodium ascorbate is hygroscopic, and the catalogue limit is loss on drying ≤0.5%. A granule with more surface area can pick up water faster in an open room, and caking is the visible result. The pack and the in-use period are part of the grade decision. Appearance is white to off-white. A yellow or brown tint is an oxidation signal, not a grade difference, and it should be investigated on any grade. ## Which grade fits which dosage form For a capsule or a tablet, the standard 80 mesh powder is the usual starting point: it is dense, it flows, and the dose fits a normal fill weight. A high-speed capsule filler may run better on the granulated grade, and a direct-compression tablet may need the granule for compressibility. For a stick pack or a drink mix, the granulated grade keeps the dust down and the standard grade dissolves quickly; the choice is a trial, not a rule. The salt tastes salty rather than sour, and the sodium declaration moves with the dose. For a liquid, the fine grade dissolves fastest, but the solution is the least stable format and the process has to protect it. For a dry blend with an acid-sensitive active, the salt's pH of 6.5–7.5 is the reason to use it. The same neutrality is a disadvantage in solution, where the ascorbate oxidises faster than at acid pH. The dosage form decides which effect matters. ## What to write into the specification - “Sodium ascorbate (monosodium L-ascorbate), CAS 134-03-2, C6H7NaO6.” - “Assay 99.0–101.0% on the dried basis by iodometric titration; HPLC result on request.” - “Identification by IR and titration; sodium by ICP-OES where the salt form is confirmed.” - “pH 6.5–7.5 in a 10% solution; loss on drying ≤0.5%.” - “Particle size ≥95% through 80 mesh; bulk density and flow where the filler needs them.” - “Heavy metals and microbiology as listed; pack, retest period and release specification named.” The product page carries the catalogue specification. The vitamin C hub carries the acid. The salt-versus-acid comparison is on sodium ascorbate versus ascorbic acid; the release tests are on the COA page; the market framework is on the compliance page; the sieve and particle methods are described under methods; the release workflow is on the quality page. ### 03 Sodium ascorbate is stable dry and fragile in solution URL: https://nutrition.rainwoodbio.com/products/vitamins/sodium-ascorbate/stability/ Reviewed: 2026-11-20 The dry salt is stable while the seal holds, and the same material in solution is one of the less stable vitamin C formats. Moisture, a pH near neutral, oxygen, light, heat and trace iron or copper all move sodium ascorbate along the ascorbic acid to dehydroascorbic acid to diketogulonic acid path. The pack and the matrix decide the shelf life, not the certificate. In one lineThe dry salt is stable while the seal holds; once it dissolves, pH near neutral, oxygen, light and trace metals drive the same oxidation path as ascorbic acid. ## The powder: moisture, caking and colour The catalogue sets loss on drying at ≤0.5%. That is a release gate, not a storage allowance. Sodium ascorbate is hygroscopic, and an opened pouch takes water from the air; the powder cakes, the as-is assay falls, and the dried-basis assay may stay inside the range while the material in the drum has changed. Light is the second driver. The salt is supplied as a white to off-white powder, and a yellow or brown tint is the first visible sign of oxidation. Keep the powder in its foil pouch or an opaque container that closes properly; a clear jar on a bench is an exposure, not a storage plan. Heat raises the rate of both moisture pickup and oxidation. A sealed pack in an ambient warehouse is usually acceptable; a hot loading bay, a car boot or a greenhouse is not. After cold storage, let the pack equilibrate before opening so that condensation does not form on the powder. ## The solution: neutral pH and a faster oxidation path A 10% solution sits at pH 6.5–7.5. At that pH the ascorbate anion is the dominant species, and the oxidation to dehydroascorbic acid runs faster than it does in the acid's pH 2.1–2.6 solution. The neutral pH that makes the salt useful in an acid-sensitive formula is the same property that shortens its life in water. Oxygen, light, heat and trace metals act together. A ready-to-drink process adds a heat load through pasteurisation or hot fill; a stick pack avoids that step because the consumer adds water at the point of use. If a liquid is unavoidable, deaerate, protect from light, control the pH, keep iron and copper out of contact, and validate the hold time before filling. A chelating agent can slow the metal-catalysed path, but it is a formula decision with its own label consequence. Lowering the pH moves the solution back toward the acid's stability window, and it also changes the taste and the preservative system. Neither change is a drop-in. ## What drives degradation Factors that move sodium ascorbate during storage | Factor | What it does | Control | Moisture | Raises loss on drying and lowers the as-is assay; causes caking | Sealed pouch; desiccant where needed; dry store | pH | Near-neutral solution oxidises faster than acid solution | Validate the matrix pH; shorten the hold; protect from oxygen | Oxygen | Forms dehydroascorbic acid | Low headspace; deaeration; nitrogen where specified | Light | Colour and assay change | Foil or opaque pack; dark store | Heat | Accelerates oxidation and moisture pickup | Cool process; controlled store | Iron and copper | Catalyse oxidation at parts-per-million level | Avoid contact; chelate; keep the metal limits The factors interact rather than simply add up: a hot, bright, damp store is worse than the three effects counted separately, and a neutral solution in clear glass brings all of them together. The useful question is not whether sodium ascorbate is stable, but in which pack, at what condition, for how long. ## A stability protocol for the ingredient The protocol should name the pack, the storage condition, the sampling points and the tests. Warehouse conditions are covered by long-term storage at 25 °C/60% RH and intermediate storage at 30 °C/65% RH; the accelerated arm at 40 °C/75% RH puts stress on the pack. A light-exposure arm catches the failure a dark incubator cannot. Test assay by titration, HPLC for ascorbic acid and dehydroascorbic acid, pH, loss on drying, appearance and microbiology at each point. The titration reports the reduced fraction, not the total vitamin; a lot with 99% reduced ascorbate and 1% dehydroascorbic acid passes the titration range and still carries oxidised vitamin. The HPLC result is the one that separates the two. The report should list each result rather than a bare pass statement, and it should name the pack and the lot family. A 1 kg pouch and a 25 kg drum have different headspace and different opening histories; the data belongs to the pack. ## The finished formula changes the answer A capsule or tablet starts with low water activity, but the shell and the excipients can still move moisture into the fill. Check loss on drying and appearance at release and after storage, and check the sodium declaration if the dose is high. In a stick pack the seal is the vulnerable point: one pinhole in the foil is enough, so the strip is checked along with the powder. A beverage combines pH, oxygen, heat and light, and the salt's neutral pH makes the oxidation path faster than in an acidified drink. Whether to add an overage is the formulator's decision, taken on label and stability grounds; it cannot compensate for a pack that admits moisture. A gummy or a chew adds a water-activity question and a colour question, and neither is answered by the bulk powder data. The salt is not automatically the more stable form. It is the more soluble and less acidic form, and those are different properties. ## How the shelf life is set No single shelf-life figure is published for sodium ascorbate, since the pack and the storage condition decide it. Any retest period assigned to the material has to appear on the specification and rest on stability data generated in that pack. A figure quoted without a pack, a condition and a test panel is a claim, not a shelf life. Once the retest period ends, re-assay the retained sample before extending use. An extension is never assumed, and a bulk figure does not transfer to a container repacked by someone else. Standard packs are listed on the product page; release tests are set out on the COA page; pack sizes and lead time are on the MOQ page; the HPLC method note explains the separation; the quality page sets out the release workflow. ### 04 Sodium ascorbate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/vitamins/sodium-ascorbate/moq/ Reviewed: 2026-11-20 The minimum order is 1 kg, supplied as a 1 kg foil pouch; the production pack is a 25 kg fiber drum. Lead time is 1–7 days for the standard 80 mesh powder. A firm quotation needs the form and CAS number, the assay basis, the quantity and pack, the destination and Incoterm, the document list and the intended market. In one lineThe 1 kg pouch is the smallest unit we can release with its own lot code and certificate; the 25 kg drum is the production pack for a full batch. ## Why the minimum is 1 kg The 1 kg pouch is a commercial unit with its own lot code, certificate and retained sample. It covers a bench trial, a qualification sample and an independent identity test, and it ships as a parcel without a pallet. That is why it is the minimum: it is the smallest pack that can be released and traced as a lot. Below 1 kg, the material is usually split from a larger lot and repacked. The split adds handling, loses the original pack identity and makes the lot chain harder to follow. The 25 kg drum is the production unit: it reduces handling per kilogram, but it commits inventory and a longer storage period. The minimum is a pack and traceability decision. ## Packs and formats Standard sodium ascorbate packs | Pack | Net weight | Typical use | Handling | Foil pouch | 1 kg | Trial, sample, small batch | Moisture and light barrier; reseal once opened | Fiber drum | 25 kg | Production | Inner liner; drum off the floor; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Particle profile and bulk density change | Fine powder | On request | Faster dissolution | Dust and static control The standard powder passes 80 mesh at ≥95%. A granulated or finer cut is a separate physical specification rather than a packing option; declare it before the quotation, since it shifts the particle-size line and can shift the lead time. ## Lead time and dispatch A standard pack is quoted at 1–7 days after order confirmation. Picking, document preparation and dispatch sit inside that window; sea or air transit, customs clearance and the buyer's own quality release do not. A granulated grade, a finer cut or a special pack takes longer, and the quotation should show that separately. Ask for a dispatch date, not just the range. The 1 kg pouch normally moves as a parcel; the 25 kg drum goes on a pallet, and the Incoterm decides who books the freight and who clears entry. Lot documents should accompany the pack rather than arrive after it. ## What a quotation needs Six items make a quotation firm enough to compare: - Product and form. Sodium ascorbate, CAS 134-03-2; write “monosodium L-ascorbate” if that is the label name. - Specification and release basis. Catalogue or monograph; assay basis; pH; loss on drying; mesh; heavy metals and microbiology. - Quantity and pack. 1 kg pouch, 25 kg drum, granulated or fine cut. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, specification, SDS, allergen, GMO, origin and residual-solvent statements, and any market statement the importer needs. - Intended use and market. Supplement, food or another use, and the country where it will be sold. A quotation without the release basis and the market is incomplete. The same powder can suit one destination and sit outside the file for another, and the paperwork is part of the offer. Commercial terms are stated on the quotation. ## The sample is a lot The 1 kg pouch is the unit on which a new user qualifies the material. Check identity, assay, pH, loss on drying, sodium and microbiology before scale-up, and retain material from that same pouch. Sample, COA and quotation should carry one lot code; without that link the sample is only a demonstration. A trial needing under a kilogram is a repack, not a catalogue pouch; it comes out of a bulk lot, carries its own handling record and is not the 1 kg foil pack. Get the split confirmed in writing and file its lot code with the trial data. ## Terms to settle before the first order The quotation should show the commercial terms and the quality terms on the same page: Incoterm, pack, dispatch window, specification revision, a COA for each lot, the retained sample, the retest period and the route for a change. Settle those in a quality agreement before the first production order. When a lot fails the agreed specification, the evidence is the retained sample and a joint re-test by the named method; a photograph of the drum proves nothing. The quality agreement should name the laboratory both sides accept and say who pays for the referee. A return decided on appearance alone is hard to defend on either side. The quality page describes the release file behind that agreement. The catalog specification is on the product page; release tests are set out on the COA page; market files are on the compliance page; shipping and documents are covered by the logistics page; the term itself is defined in the MOQ glossary entry. ### 05 The regulatory file for sodium ascorbate URL: https://nutrition.rainwoodbio.com/products/vitamins/sodium-ascorbate/compliance/ Reviewed: 2026-11-20 Sodium ascorbate can enter a market as the food additive E301 or as a vitamin C source in a food supplement, and the two routes carry different labels. In the EU the additive is listed in Regulation (EC) No 1333/2008 and sodium-L-ascorbate appears among the vitamin C forms in Annex II of Directive 2002/46/EC; in the US the substance is on the GRAS list at 21 CFR 182.3731. The buyer's regulatory team confirms the route, the category and the use level for the destination. In one lineThe same salt can enter as additive E301 or as a vitamin C source; the route decides the label, the limits and the documents, and the destination decides which route is open. ## The four checks Four checks decide whether the file is complete. The first is identity: the exact form, the CAS number and the specification version. The second is the route: additive, nutrient source or dietary ingredient, because the same salt can be regulated through different instruments. The third is the contaminant limit, set on the product as sold. The fourth is the label and the claim, reviewed separately from the ingredient. The category changes the label more than the chemistry does. A food that uses sodium ascorbate as an additive names E301 in the ingredient list. A supplement that uses it as a vitamin C source names the salt and declares the vitamin, with the sodium that comes with it. Both can be correct, in the right category and the right market. The file holds the specification, the lot certificate, the route, the limits, the label and the change-control record. This page names the instruments; the current text and the destination decide the conclusion. ## European Union E301 is the additive identity for sodium ascorbate. Regulation (EC) No 1333/2008 lists it by food category, with the maximum level or quantum satis for each; the category of the finished food decides whether the listing is available. That is a different question from the supplement route. For food supplements, Annex II of Directive 2002/46/EC lists sodium-L-ascorbate among the vitamin C forms. Under that route, the label declares vitamin C in mg and as a percentage of the 80 mg NRV, while the ingredient list names the salt. Sodium and salt are declared under Regulation (EU) No 1169/2011, and the salt figure is the sodium multiplied by 2.5. As of this review, there is no harmonised maximum for vitamin C in food supplements; a Member State may apply its own limit, so the destination has to be checked. The additive listing and the supplement listing are separate, and one does not substitute for the other. ## United States 21 CFR 182.3731 lists sodium ascorbate as generally recognised as safe when used in accordance with good manufacturing practice. In a dietary supplement it is used as a vitamin C source; the Supplement Facts panel declares vitamin C in mg and as a percentage of the 90 mg Daily Value, and the ingredient list names sodium ascorbate. The sodium from the salt is part of the supplement's sodium declaration, and the salt contributes about 11.6 mg of sodium per 100 mg. The FDA does not set a federal maximum for lead in dietary supplements; California Proposition 65 has its own thresholds, and the destination state and the daily dose have to be checked together. The dietary-supplement route, the structure/function wording and the label are the buyer's review. The certificate supports the material; it does not settle the route. ## Contaminants and limits Lead, cadmium, mercury and arsenic · food supplements, by market | Element | EU | US | UK | Lead (Pb) | 3.0 mg/kg | No federal maximum; state rules such as Prop 65 may apply | Retained limit; check current law | Cadmium (Cd) | 1.0 mg/kg | No federal maximum in this review | Retained limit; check current law | Mercury (Hg) | 0.10 mg/kg | No federal maximum in this review | Retained limit; check current law | Arsenic (As) | Not harmonised; Member State rules may apply | No federal maximum in this review | Check current law These are product limits, not material limits. The catalogue's powder limits are Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg; the supplement limit applies after the powder is diluted by excipients and divided into doses. Convert the two at the intended daily dose. The EU limits come from Regulation (EU) 2023/915 as of this review. Check the current consolidated text before the label is fixed. ## Labels and claims In the EU, vitamin C health claims are authorised under Regulation (EC) No 1924/2006 and the register that follows it. Each entry carries conditions of use, and the claim belongs to the brand that puts it on the label. A disease claim is not available. In the US, a structure/function statement is the brand's responsibility; it needs substantiation and the DSHEA disclaimer, and it must not be a disease claim. The form on the certificate and the form in the claim have to match: a claim written for ascorbic acid is not automatically a claim for the sodium salt. The sodium declaration is part of the label review. A switch from ascorbic acid to sodium ascorbate can move the sodium or salt figure without moving the vitamin C figure, and that is the kind of change that slips through a label check. This site publishes the specification and makes no health claim. ## Documents for the file - Batch COA with the assay basis, titration and HPLC results, pH, loss on drying, IR, metals and microbiology. - Specification and technical data sheet naming sodium ascorbate, CAS 134-03-2. - Safety data sheet in the 16-section format. - Allergen, GMO, origin and residual-solvent statements. - The E301 additive statement, or the supplement vitamin-form citation, for the destination. - A label mock-up showing the ingredient name, the vitamin C declaration and the sodium or salt figure. - The change-control record for source, process and pack. A document pack without the route is a folder of certificates. Name the market and the category on the covering sheet. ## Checklist before the first order - Form and CAS named on the specification and the COA. - Route chosen: E301 additive or vitamin C source in a supplement. - Destination contaminant limits converted to the finished dose. - Label carries the salt name, the vitamin C figure and the sodium or salt figure. - Claims reviewed for the market and the form. - Documents versioned and the change control agreed. The market notes expand the framework: EU regulatory notes, US regulatory notes and UK regulatory notes. The definition of the NRV is in the glossary, the batch file is described on the quality page, and the product itself is on the sodium ascorbate page. ### 06 How we prove a sodium ascorbate lot is the salt URL: https://nutrition.rainwoodbio.com/products/vitamins/sodium-ascorbate/identity/ Reviewed: 2026-11-20 A sodium ascorbate lot is the salt when four lines agree: the document names the monosodium salt and CAS 134-03-2, IR matches the ascorbate reference, sodium is close to the theoretical 11.6%, and pH sits in the 6.5–7.5 window rather than the acid's 2.1–2.6. The assay alone cannot separate the salt from ascorbic acid, a dilution or sodium erythorbate; sodium, pH and rotation are the tests that can. In one lineIdentity needs four agreeing lines: IR names the ascorbate, sodium proves the salt, pH separates it from the acid, and rotation excludes the erythorbate isomer. ## The four identity layers A document can name the correct salt and still leave it unproven. Each of the four layers below is a separate question with its own evidence, and a supplier who answers only the first has described paperwork rather than powder. Four layers of sodium ascorbate identity | Layer | Question | Test | What it proves | Document | Is the form named? | Name, CAS number, formula | Paperwork only | IR | Is the anion ascorbate? | FTIR against a reference | The molecule family, not the salt | Sodium | Is it the monosodium salt? | ICP-OES or flame photometry | The counter-ion | Rotation | Is it the L form? | Specific rotation | Excludes sodium erythorbate | Mass balance | Is it diluted or wet? | Assay, loss on drying, pH | Consistency of the numbers The IR spectrum is the catalogue identification. It shows the ascorbate functional groups, and it does not count the sodium. The sodium figure is the direct check on the salt, and the rotation is the check on the isomer. None of them is an assay. ## The sodium ratio: 11.6% The monosodium salt has one sodium ion per molecule. The theoretical sodium content is 22.99 ÷ 198.11 = 11.61% by mass, and the ascorbic acid equivalent is 176.12 ÷ 198.11 = 88.9%. A sodium result close to 11.6%, with an assay of 99.0–101.0% on the dried basis, is consistent with the salt. A low sodium figure points to ascorbic acid, a dilution or a different cation; a high figure points to another sodium salt, a buffer or sodium chloride. The pH supports the reading: the salt sits at 6.5–7.5 in a 10% solution, while the acid sits at 2.1–2.6 in a 5% solution. A blend moves the pH toward the acid in proportion to the acid fraction. Sodium by ICP-OES is not on the catalogue panel, so it is an additional test. Request it when the form is disputed, when a new source is qualified, or when the label names the salt and the certificate does not. Flame photometry or atomic absorption can answer the same question; name the method on the report. ## X-ray diffraction and the solid state X-ray diffraction answers the solid-state question: is the powder crystalline, and does the pattern match a reference? Sodium ascorbate is supplied as a crystalline powder, and a granulated grade is an agglomerate of the same crystals. XRD can distinguish that from an amorphous carrier or a different solid form, and it can compare lots from two sources. XRD is not a purity assay and it does not measure the counter-ion. It is not a routine release test here. If a solid-form question matters to the process, ask for the pattern, the reference and the detection limit; a report that says only “XRD conforms” has added little. For a disputed lot, XRD plus sodium plus IR is stronger than any one of them. The combination answers the solid, the salt and the molecule, and the assay closes the mass balance. ## What adulteration looks like Common sodium ascorbate substitutions and the signals | Adulterant | What it does | Signal | Test | Ascorbic acid | No sodium; pH falls | Sodium below 11.6%; pH below 6.5%; assay above 101% if calculated as the salt | Sodium, pH, titration basis | Sodium erythorbate | Same formula and sodium; cheaper isomer | Rotation +95.5° to +98° against +103° to +108° | Specific rotation, chiral HPLC | Sugar or starch | Dilutes the powder | Assay low; sodium low; loss on drying may rise | Mass balance, sodium | Other sodium salt | Raises sodium, lowers assay | Sodium high; pH or ash moves | ICP-OES, chloride, ash | Water | Raises loss on drying | As-is assay low; dried-basis assay normal | Loss on drying | Oxidation | Forms dehydroascorbic acid | Yellow or brown tint; HPLC shows the oxidation product | HPLC, appearance Colour is the weakest signal. White to off-white covers a wide range, and a yellow tint can come from oxidation or from a different drying step. The stronger signals are the sodium figure, the pH and the rotation. A certificate carrying appearance and assay but no identity evidence leaves the most likely substitution untested. ## How to write identity into the specification - “Sodium ascorbate (monosodium L-ascorbate), CAS 134-03-2, C6H7NaO6.” - “Assay 99.0–101.0% on the dried basis by iodometric titration; HPLC for ascorbic acid and dehydroascorbic acid on request.” - “Identification by IR against a reference; report the sodium result by ICP-OES where the salt form is confirmed.” - “pH 6.5–7.5 in a 10% solution; loss on drying ≤0.5%.” - “Specific rotation +103° to +108° at 10% in water, where the erythorbate substitution is a risk.” - “Particle size ≥95% through 80 mesh; heavy metals and microbiology as listed.” - “No undeclared diluent; the form and CAS appear on the COA and the label.” Write the form, the test and the expected result into the specification; a supplier cannot release against a name alone. ## Five questions for the supplier - Which form and CAS number are on the certificate? - What is the sodium result by ICP-OES or flame photometry, and what method was used? - What are the pH and loss on drying on the same lot? - Can you provide the IR spectrum and, if the isomer is a risk, the specific rotation? - If this lot is contested, would you agree to a joint re-test of the retained sample? Those five answers together form an identity file; one assay figure on its own does not. The product page carries the catalogue specification; the COA page shows where each figure sits on the certificate; the grades page covers the physical options; the level-four comparison covers the label consequences; the vitamin C hub carries the acid; the XRD method note explains the solid-state check. ### 02.1 Sodium ascorbate vs ascorbic acid: pH, sodium and the label URL: https://nutrition.rainwoodbio.com/products/vitamins/sodium-ascorbate/grades/sodium-ascorbate-vs-ascorbic-acid/ Reviewed: 2026-11-20 Sodium ascorbate and ascorbic acid deliver the same vitamin in different packages. The salt carries one sodium ion per molecule, so 100 mg of sodium ascorbate supplies 88.9 mg of ascorbic acid equivalent and 11.6 mg of sodium, and its 10% solution sits at pH 6.5–7.5 against pH 2.1–2.6 for a 5% ascorbic acid solution. The label has to carry the salt name, the vitamin C figure and the sodium that comes with it. In one lineSodium ascorbate supplies 88.9% of its mass as ascorbic acid equivalent and about 11.6% as sodium, and it moves a 10% solution from the acid's pH 2.1–2.6 to pH 6.5–7.5; the label has to carry all three facts. ## Two materials, one vitamin The two materials share the ascorbate anion and differ in the cation. Ascorbic acid, CAS 50-81-7, is the free acid; sodium ascorbate, CAS 134-03-2, is the monosodium salt. The molecular weight moves from 176.12 to 198.11, a difference of 22.0, which is one sodium atom in place of one hydrogen. Ascorbic acid against sodium ascorbate | Property | Ascorbic acid | Sodium ascorbate | CAS number | 50-81-7 | 134-03-2 | Formula | C6H8O6 | C6H7NaO6 | Molecular weight | 176.12 | 198.11 | Vitamin C per gram | 1.000 g | 0.889 g | Sodium per gram | None | 0.116 g | pH | 2.1–2.6 (5% solution) | 6.5–7.5 (10% solution) | Taste | Sharp sour | Salty, less sour | Label name | L-ascorbic acid | Sodium ascorbate (sodium L-ascorbate) The table is a comparison, not a ranking: each form is a different ingredient with its own CAS, label name and release specification. ## pH: the first thing the formula notices A 5% ascorbic acid solution sits at 2.1–2.6; a 10% sodium ascorbate solution sits at 6.5–7.5. The figures are measured at the concentrations their specifications name; the windows do not overlap, and the midpoints are more than four pH units apart. The salt is the conjugate base of the acid, so it does not donate the same protons. In an acid-sensitive matrix — a carbonate, a protein, a gel, a chew — that is the reason to use it. In a beverage that needs a tart profile, the salt leaves the acidity to another acid, and rebuilding that profile is a formula change, not a substitution. pH is also a stability variable. In solution, the neutral salt oxidises faster than the acid, so the form that is gentler on the matrix can be harder on the vitamin. The finished-product trial has to measure both effects. ## The sodium the label carries Sodium ascorbate is about 11.6% sodium by mass. The figure follows from the formula: one sodium atom at 22.99 in a molecule of 198.11. A 100 mg dose of the salt carries 11.6 mg of sodium; a 500 mg dose carries 58 mg; a 1,000 mg dose carries 116 mg. In the EU, sodium and salt are declared in the nutrition declaration, and salt is the sodium multiplied by 2.5: 58 mg of sodium is 145 mg of salt. In the US, sodium is declared in the Supplement Facts panel against a 2,300 mg Daily Value, so 58 mg is about 2.5% of the Daily Value. The sodium is also analytical evidence. A lot that returns 11.6% sodium with a 99–101% assay is consistent with the salt; a low figure points to the acid or a dilution. The label and the certificate use the same number from opposite directions. ## Dose arithmetic and fill weight The conversion between the forms is the ratio of molecular weights: 176.12 ÷ 198.11 = 0.889. One gram of sodium ascorbate supplies 0.889 g of ascorbic acid equivalent; one gram of ascorbic acid needs 1.125 g of the salt. The factor is fixed by the formula, not by the assay. Two worked examples. A label that declares 100 mg of vitamin C from sodium ascorbate needs 100 ÷ 0.889 = 112.5 mg of the salt. A label that declares 100 mg of sodium ascorbate delivers 88.9 mg of vitamin C. Neither figure is a recommendation; they are the arithmetic that keeps the label and the weigh-up in agreement. The assay basis is a second conversion. A lot at 99.5% on the dried basis with 0.4% loss on drying is 99.1% as-is; that 99.1% is the salt, so the ascorbic acid equivalent as-is is 99.1 × 0.889 = 88.1%. Apply the water correction, then the salt factor, and do not skip either step. The fill weight follows. A 500 mg vitamin C dose needs 562.5 mg of the salt against 500 mg of the acid, which can change the capsule size or the stick-pack weight. In a small capsule, the difference can decide whether the dose fits. ## What the label has to say In the EU, the ingredient list names the form, and the nutrition declaration gives vitamin C in mg and as a percentage of the 80 mg NRV. Sodium and salt appear in the same declaration. The additive identity E301 is used when the salt is added as a food additive, not when it is the vitamin source in a supplement; the category decides which convention applies. In the US, the Supplement Facts panel declares vitamin C in mg and as a percentage of the 90 mg Daily Value, with the source in parentheses: “Vitamin C (as sodium ascorbate)”. Sodium is declared separately. The ingredient list names sodium ascorbate. The declared vitamin C is 88.9% of the salt mass. A label that declares the salt mass as vitamin C overstates the vitamin by 12.5%; a label that declares the vitamin and forgets the sodium understates the sodium. A switch changes the ingredient name, the mass and the sodium figure; it does not change the vitamin C figure if the dose is recalculated. The claim is a separate review. This site makes no health claim; the brand's reviewer checks the wording against the market, the form and the product. ## When the salt is the right choice Choosing between sodium ascorbate and ascorbic acid | Situation | Sodium ascorbate | Ascorbic acid | Neutral or acid-sensitive matrix | Fits | May attack the matrix | Stick pack or drink mix | Salty, less sour | Sharp sour | Low-sodium label | Adds sodium | No sodium from the vitamin | Dry capsule, tight fill | More mass per dose | Denser | Acidic beverage | Needs another acid | Fits the profile | Chew or gummy | Less sour; hygroscopic | Sharp; may need a coating The salt is the choice when the formula cannot take the acid, when the taste has to be less sour, or when the label can carry the sodium. The acid is the choice when the formula is dry and swallowed, when the sodium is already at its limit, or when the acidity is part of the product. If neither constraint is present, the acid is the simpler material and a switch buys nothing. A switch in either direction needs a new specification, a stability trial, a label review and a written change control; it is not a weigh-up adjustment. The sodium ascorbate page carries the catalogue specification; the grades page places this comparison in the wider range; the vitamin C hub carries the acid; the stability page covers the oxidation path; the methods library explains the assays; the quality page covers release. ### 01 What the COA for thiamine mononitrate actually contains URL: https://nutrition.rainwoodbio.com/products/vitamins/thiamine-mononitrate/coa/ Reviewed: 2026-11-20 The certificate for a thiamine mononitrate lot reports appearance, identification by HPLC and infrared, assay by HPLC, loss on drying, pH, the heavy-metal panel, microbiology and particle size. The release limits below are the catalog specification; each measured result belongs in its own column beside the method that produced it. The line that separates this salt from thiamine hydrochloride is the counter-ion rather than the percentage, so identity and moisture carry as much weight as the assay. In one lineAn assay says how much thiamine is present; only the identity and the counter-ion say that the powder is the mononitrate salt. ## What the release panel reports Each row should let a reviewer check the conclusion: the test, the method that produced the number, and the limit the lot had to meet. A row that says only “conforms” cannot be checked. The panel below is what this product is released against. Identity, assay, moisture and contaminants · thiamine mononitrate | Test | Procedure | Limit for release | Appearance | Visual | White to off-white powder | Identification | HPLC retention and infrared spectrum | Conforms to the reference | Assay | HPLC with ultraviolet detection | 98.0–101.0%, basis stated on the certificate | Loss on drying | Gravimetric | ≤1.0% | pH (5% solution) | Potentiometric | 6.5–7.5 | Heavy metals | ICP-MS | Lead ≤3, arsenic ≤2, cadmium ≤1, mercury ≤0.1 mg/kg | Microbiology | Plate count and absence tests | Aerobic plate count ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella not detected | Particle size | Sieve analysis | 95% or more passes 80 mesh The identity line ties the lot to the form: HPLC retention shows a thiamine peak, and the infrared spectrum compares the whole solid with a reference, including the nitrate counter-ion. A certificate that lists only a retention time has shown the vitamin, not the version of it. ## Assay basis, moisture and the nitrate counter-ion The assay has to say what it is a percentage of, and on what basis. A result of 99.0% on the dried basis with 0.8% loss on drying is 98.2% of the powder as weighed; the two figures describe the same powder, and only one of them is the amount in the scoop. The basis belongs in the assay row, not in a footnote. The second basis question is the salt itself. Thiamine mononitrate is 81.1% thiamine by mass and 18.9% nitrate; a certificate assay is a figure for the salt, while a label often declares thiamine. A 100 mg quantity of the salt carries 81.1 mg of thiamine, and a label that declares 100 mg of thiamine needs 123 mg of the salt. Mixing the two figures is a common arithmetic error in a B1 specification. The pH line is a supporting check with a diagnostic use. A 5% solution of the mononitrate sits at 6.5–7.5, close to neutral; a hydrochloride solution is acidic. A certificate that reports an acid pH against this specification is describing a different salt, or a lot that has been acidified. The monograph storage statement also asks for a tight, light-resistant container, and the certificate should name the pack the lot was released in. ## Release limit versus batch result One column is the gate the lot had to pass; the other is what the laboratory actually found. They stay separate, with the method beside them. If the result column repeats the range, it is a copy of the gate rather than a measurement. What the result column should contain | Test | Limit | What the result column shows | Assay | 98.0–101.0% | A measured percentage with the basis and the method | Loss on drying | ≤1.0% | A measured percentage and the drying condition | pH | 6.5–7.5 at 5% | The measured pH with concentration and temperature | Heavy metals | Per element | One measured value per element, in mg/kg | Microbiology | Count plus absence | A plate count and the absence finding for this lot | Identity | Conforms | Retention time, infrared match and the reference used “Passes specification” is the reviewer's conclusion, and the page should let the reader check it. A micro result is a count and an absence finding; a heavy-metal result is a number for each element rather than one combined figure. A combined total hides the element that matters. ## What moves between batches The synthesis and crystallisation steps move the colour and the residual moisture; drying moves the loss on drying; milling and sieving move the particle-size result. The 80 mesh line is a finishing specification, so it can change with a new mill or sieve while the chemistry is unchanged. Colour is a wide window here, white to off-white, and a shift inside it is not an identity failure; a grey or yellow cast is worth a question. A single result near an edge says less than a trend across lots. Assay drifting low, loss on drying climbing, or a new peak in the chromatogram all point to a process change or a degradation route. The certificate's lot code should tie the pouch, the drum and the retained sample together, so any trend can be traced back to its source. Chloride is not a specification line, but it is a useful screen. A mononitrate lot should contain no significant chloride; a result above the method's detection limit suggests hydrochloride carry-over, a shared line or a mislabelled lot. Ask for the ion-chromatography result when the form is disputed rather than reading the assay again. ## When to order an outside test Commission an outside test when a source is new, when the first consignment enters a regulated market, when the supplier's certificate does not settle a salt-form claim, or when a result is contested. The panel to request is not a duplicate of the release sheet: HPLC for assay and related substances, infrared for identity, loss on drying, ion chromatography for nitrate and chloride, ICP-MS for the metals and a plate count. Add X-ray diffraction if the solid form is in question, and a nitrate-specific check if a nitrate salt could have been used as a diluent. Ask for the detection limit of each screen; a “not detected” line without a limit is evidence about the method, not the sample. The sample tested should be the sample retained, and the report should identify the lot. ## What to compare between suppliers Six lines make two offers comparable: salt and CAS number; assay value and basis; identity by HPLC and infrared; loss on drying; pH; and the metal and micro results. If two offers agree on the assay but not on the basis or the counter-ion, they are quoting different materials. The catalog specification is on the thiamine mononitrate product page. The tests that separate the salt from the hydrochloride are on the identity page; the same comparison for the other salt sits on the vitamin B1 hydrochloride page; the methods are described in the analytical methods library; the release workflow is on the quality page. ### 02 Thiamine mononitrate grades: powder, flow and the salt decision URL: https://nutrition.rainwoodbio.com/products/vitamins/thiamine-mononitrate/grades/ Reviewed: 2026-11-20 Thiamine mononitrate is supplied as a standard 80 mesh powder, with a granulated form on request. The grade decision that changes the most is the salt itself: the mononitrate and the hydrochloride differ in water uptake, solution pH and label name, and the vitamin content per gram differs by about three percent. Within the mononitrate, particle size and flow decide which dosage form the powder suits, not the assay percentage. In one lineThe grade is a particle and salt decision: the vitamin is the same, but the flow, the water uptake and the name on the label are not. ## Why the mononitrate has few grades Thiamine mononitrate is a synthetic vitamin made at a defined purity, so the range is narrow: one chemistry, a small number of physical forms. The differences that matter to a buyer are how the powder flows, how much dust it makes, how fast it dissolves, and how much water it takes up in a hopper. Those are finishing decisions, not a second grade of the molecule. The larger choice is the salt. The monograph of the hydrochloride allows up to 5.0% water and the salt is hygroscopic; the mononitrate allows 1.0% loss on drying and is the lower-hygroscopicity form. That is why a dry blend, a tablet or a fortified flour usually specifies the mononitrate, while an acidic beverage usually specifies the hydrochloride. The level-four comparison takes that decision apart. ## The forms side by side Thiamine mononitrate forms and the neighbouring salt | Form | Particle | Flow and dust | Fits | Standard powder | ≥95% through 80 mesh | Free-flowing; some dust in handling | Capsules, tablets, dry blends, stick packs | Granulated, on request | Coarser agglomerates | Better flow, less dust, slower to dissolve | Premixes, tablet compression, drum handling | Thiamine hydrochloride | Its own specification | Hygroscopic; dissolves readily | Acidic liquids, syrups, clear beverages Granulation is a specification change, not a packing choice. It moves the particle-size line, the bulk density, the flow and the dissolution time, and it should be written into the specification before the order. A granulated lot and a standard powder are not interchangeable in a validated tablet process even when the assay is identical. ## Flow, dust and the blend The standard powder is fine enough to disperse quickly but light enough to dust. In a low-dose premix, dust is a loss and a hygiene issue: material sticks to the mixer wall, and the assay of the finished blend depends on how much stayed in the air. A granulated grade reduces the dust and improves flow, at the cost of a slower dissolve and a coarser mouthfeel in a stick pack. Segregation is the other physical risk. A fine vitamin blended with a coarse carrier can separate in a drum or during conveying, so the samples taken from the top and the bottom of a batch may not agree. Granulation narrows the particle-size gap between the vitamin and the carrier, which is one reason a premix supplier asks for it. Ask for the particle-size distribution, not only the “≥95% through 80 mesh” line, when the blend is sensitive. For tablets, flow and compressibility decide the fill weight. For capsules, bulk density decides how much powder fits in a size. Neither property is on the certificate, so a trial on the real equipment is worth more than a second assay. ## Dose arithmetic and the label The label and the weigh-up have to use the same basis. Thiamine mononitrate is 81.1% thiamine by mass, so 1 mg of declared thiamine needs 1.23 mg of the salt, and 100 mg of the salt delivers 81.1 mg of thiamine. The hydrochloride is 78.7% thiamine, so the same 1 mg of thiamine needs 1.27 mg of that salt. Switching salt changes the weight behind the claim by about three percent. That difference is small but real, and it compounds at high doses. A 500 mg thiamine claim needs 617 mg of the mononitrate or 635 mg of the hydrochloride, which matters when the capsule size is already fixed. The assay range is a second, separate correction: a lot at the low end of the range contributes less thiamine per gram than one at the top, and an overage has to be calculated on the measured result. The dosage form follows the same logic. A tablet or capsule takes the mononitrate for its low water uptake. A stick pack blended dry takes either salt, but the mononitrate is more forgiving in the filling room. A clear acidic drink takes the hydrochloride, because the mononitrate dissolves more slowly and leaves the solution near neutral. ## What to write into the specification - “Thiamine mononitrate, CAS 532-43-4, C12H17N5O4S.” - “Assay 98.0–101.0% by HPLC; the certificate states the basis.” - “Identification by HPLC retention and infrared spectrum.” - “Loss on drying ≤1.0%; pH 6.5–7.5 in 5% solution.” - “Particle size ≥95% through 80 mesh; granulated form on request only.” - “Heavy metals and microbiology as listed; pack and lot code stated.” Add the destination market and the intended dosage form. A specification that names the salt, the assay basis and the particle profile can be quoted and tested; one that says “vitamin B1 powder” cannot. ## When the mononitrate is the wrong choice If the formula is an acidic clear beverage, a syrup or a liquid concentrate, the hydrochloride is the easier starting point: it dissolves readily and brings an acid pH that suits thiamine. The mononitrate can be used in a liquid if the pH is adjusted and the hold time is validated, but it is not the default. If the process uses a sulfiting agent, neither salt is a good carrier, because sulfite cleaves the molecule. If the label already names the hydrochloride and the stability file was built around it, a switch to the mononitrate is a new specification, a new dose calculation and a new stability question. The reverse is equally true. The salt is part of the identity of the product, not a purchasing convenience. The product hub lists the catalog specification and the packs. The mononitrate versus hydrochloride page covers the water and label consequences; the COA page shows how the grade is released; the stability page covers the matrix; the hydrochloride product page is the other salt; the methods library explains the particle-size and assay tests, and the quality page covers release. ### 02.1 Thiamine mononitrate vs hydrochloride: the salt, the water and the label URL: https://nutrition.rainwoodbio.com/products/vitamins/thiamine-mononitrate/grades/thiamine-mononitrate-vs-hydrochloride/ Reviewed: 2026-11-20 Thiamine mononitrate and thiamine hydrochloride carry the same thiamine cation with different counter-ions: one nitrate against two chlorides. The mononitrate is 327.36 g/mol and 81.1% thiamine, holds a 1.0% loss-on-drying limit and gives a near-neutral solution; the hydrochloride is 337.27 g/mol and 78.7% thiamine, allows up to 5.0% water and gives an acid solution. The choice turns on water, solubility and the name the label has to carry. In one lineSame vitamin, different counter-ion: about 3% less mass per milligram of thiamine, one fifth of the water allowance, and a label that must name the nitrate salt. ## Two salts, one vitamin The structural difference is the counter-ion. Thiamine is a thiazolium cation; the mononitrate pairs it with one nitrate ion, and the hydrochloride is the chloride salt with an additional hydrogen chloride, which is why its formula carries two chlorides. Both are pharmacopoeial articles and both appear on the EU permitted-forms list for vitamin B1. Thiamine mononitrate against thiamine hydrochloride | Property | Thiamine mononitrate | Thiamine hydrochloride | CAS number | 532-43-4 | 67-03-8 | Formula | C12H17N5O4S | C12H17ClN4OS·HCl | Molecular weight | 327.36 | 337.27 | Counter-ion | One nitrate | Two chlorides | Thiamine content | 81.1% by mass | 78.7% by mass | Water limit | Loss on drying ≤1.0% | Water ≤5.0% | 5% solution pH | 6.5–7.5 | About pH 3 | Label name | Thiamine mononitrate | Thiamine hydrochloride Neither salt is an interchangeable substitute for the other: separate specification items, separate certificates, separate label names. A purchase order that says “vitamin B1” has not chosen either. ## The water allowance The moisture limit is the clearest physical difference. The mononitrate is the low-hygroscopicity salt and is released at loss on drying ≤1.0%; the hydrochloride is hygroscopic and its specification allows up to 5.0% water. Leave the hydrochloride open in a humid room and it takes up water, cakes and loses potency on an as-is basis; the mononitrate in the same room is much less affected. That behaviour is why dry blends, tablets and capsules generally use the nitrate salt. Water also changes the weigh-up. Take two lots both at 99.2% on the dried basis: the hydrochloride with 4.0% water carries 95.2% salt as-is, while the mononitrate with 0.6% water carries 98.6%. The dried-basis results are the same; the powder on the balance is not. The tighter limit makes the as-is figure more predictable from lot to lot. Both salts still need a sealed, light-resistant pack. Low hygroscopicity is a smaller water uptake, not a licence to store the powder open. ## Solubility and the solution The hydrochloride dissolves readily in water and is the usual choice where a clear solution is wanted. The mononitrate dissolves more slowly and to a lower concentration, so a concentrated stock made from it may need warming, longer mixing or a larger volume. For a stick pack or a drink mix at a normal dose, both salts dissolve in the consumer's glass; for a manufacturing concentrate, the difference is practical. Solution pH matters as much as solubility. The mononitrate gives a near-neutral solution; the hydrochloride gives an acid one, and thiamine is most stable at acid pH. An acidic beverage therefore usually favours the hydrochloride. A mononitrate solution can be used if an acidulant brings the pH into the stable range and the hold time is validated. ## Dry and wet behave differently As a powder, the mononitrate is the tougher of the two: less water uptake, a tighter moisture limit and better behaviour in a blend. In solution the order reverses. The hydrochloride keeps the matrix acidic, where thiamine is more stable; the mononitrate sits near neutral, where heat, oxygen and light degrade it faster. A dry tablet therefore favours the mononitrate, and a beverage at pH 3–4 favours the hydrochloride. Both salts are cleaved by sulfite and bisulfite, affected by copper and iron, and lose potency under heat and light. The salt and the process belong in one trial: a solid that survives the drum can still lose thiamine once the matrix is warm and wet. ## The arithmetic between the salts Because one mole of either salt carries one mole of thiamine, the conversion is a ratio of molecular weights. One milligram of thiamine needs 1.23 mg of the mononitrate or 1.27 mg of the hydrochloride. In the other direction, 100 mg of the mononitrate delivers 81.1 mg of thiamine and 100 mg of the hydrochloride delivers 78.7 mg. Per gram, the nitrate salt carries about three percent more thiamine. The difference compounds at high doses: a 500 mg thiamine claim needs 617 mg of the mononitrate or 635 mg of the hydrochloride, which can decide a capsule size. The assay range is a second correction, so an overage is calculated on the measured result, not the label. State the basis as well as the salt. A certificate figure is a salt figure unless it says otherwise, and a label figure is usually thiamine. Mixing them is the error that makes a correct assay produce an incorrect dose. ## The label and the declared nutrient In the EU, Directive 2002/46/EC places “thiamin mononitrate” and “thiamin hydrochloride” on the Annex II list as two distinct forms, and the ingredient list must say which one is in the product. The nutrition panel declares thiamine in mg and as a share of the 1.1 mg reference value. US labels declare thiamine in the Supplement Facts panel, where the Daily Reference Value is 1.2 mg, and name the salt in the ingredient statement. The UK applies retained labelling rules and its own reference value. Switch the salt and two label facts move: the ingredient name, and the mass of salt behind the same thiamine number. The declared nutrient and the claim do not change. A pack that names the hydrochloride while holding the mononitrate is mislabelled, even if the thiamine figure is right. ## When to choose which - Tablet, capsule, dry premix or fortified flour: the mononitrate, chosen for low water uptake and the 1.0% moisture limit. - Acidic drink, syrup or liquid concentrate around pH 3–4: the hydrochloride, which dissolves easily and supplies the acid pH. - Stick pack mixed dry and made up by the consumer: either salt is workable, with the hydrochloride dissolving faster and the mononitrate easier to handle in the filling room. - Gummy or chew that goes through a cook: trial both salts in the real matrix, because pH and heat matter more than the label name. - An existing label and stability file: keep the salt already named and tested; changing it means a new specification and fresh stability work. The product hub has the mononitrate specification and pack; the grades page sets this choice beside the physical forms; the stability page follows the matrix effects; the identity page proves the nitrate salt; the hydrochloride product page is the other salt; the methods library covers the tests; the quality page describes release. ### 03 Thiamine mononitrate keeps dry; the solution is where it fails URL: https://nutrition.rainwoodbio.com/products/vitamins/thiamine-mononitrate/stability/ Reviewed: 2026-11-20 Dry thiamine mononitrate is the more stable of the two commercial B1 salts. It takes up little water, and a sealed pack at ordinary room temperature holds the assay for the retest period. The vulnerability appears once the powder is dissolved or wetted: thiamine is most stable at acid pH, and a mononitrate solution sits close to neutral, where heat, oxygen, light and sulfite act faster. In one lineThe mononitrate is the dry-matrix salt: it keeps in a sealed pack, and it loses thiamine once water, heat and a near-neutral pH arrive together. ## The powder: low water uptake, not no water uptake The catalog allows loss on drying up to 1.0%, a tight limit that reflects the salt rather than a generous specification. The mononitrate is the low-hygroscopicity form, which is why dry blends, tablets and fortified flours specify it. Low uptake is not immunity: an open pouch in a humid dispensary still gains water, the as-is assay falls and the powder can cake. The 1 kg foil pouch and the 25 kg drum with a food-grade liner are the barrier, and they work only while they are closed. Light is the second storage variable. The pharmacopoeial storage statement asks for a tight, light-resistant container, and the practical version is to keep the powder in its original pack or in an opaque container with a lid that seals. A clear jar on a bench is an exposure, however short the hold. Heat accelerates both moisture movement and light damage, so a warm hopper overnight is a worse store than a cool, dark room. After cold storage, let the sealed pack reach room temperature before opening it: condensation on a cold powder is water delivered exactly where the specification is trying to keep it out. ## The solution: near-neutral, and the least stable format A 5% solution sits at pH 6.5–7.5, and that is the first fact a beverage formulator needs: thiamine holds its potency far more reliably between about pH 2 and pH 4 than it does as the pH climbs towards neutral and alkaline. The mononitrate brings the vitamin but not the acid; a solution made from it needs an acidulant, a buffer and a measured pH before a hold time can be assigned. Heat raises the rate of every route at once. Pasteurisation, hot fill, a gummy cook or a warm holding tank each add time at temperature, and the loss grows with pH and with dissolved oxygen. Light and trace metals add to it. Sulfite and bisulfite are a separate and direct route: they split the thiamine molecule, so a formula preserved with sulfite is the wrong home for any B1 salt, whatever the drum assay says. The dissolved salt is also the form most likely to be held between shifts. A stock solution prepared at neutral pH and left in a clear tank over a weekend combines water, oxygen, light and time; the hold should be short, dark, cool and validated, or the solution should be made up fresh. ## What drives the loss Stress factors and the control for thiamine mononitrate | Stress | Consequence | Control | pH above about 4–5 | The thiazolium ring opens and activity falls | Hold the matrix acidic and check the finished pH | Heat | Faster loss in liquids and damp solids | Keep the heat step short and cool promptly | Water | More mobility for the reaction; caking | Sealed pack; low water activity; humidity control | Sulfite and bisulfite | The molecule is split at the bridge | Avoid sulfiting agents in the formula | Oxygen | Oxidative loss, mainly in liquids | De-aerate; low headspace; sealed pack | Copper and iron | Trace-metal catalysis | Control contact surfaces and the mineral partner | Light | Surface loss in powders and solutions | Opaque or foil pack; dark storage These factors combine rather than add: a warm, bright, aerated solution at pH 6.5 is worse than three separate stresses. The useful question is not whether thiamine is stable in general, but how stable this matrix is in this pack at this condition for this period. ## A stability protocol for the ingredient The design follows ICH Q1A: 25 °C/60% relative humidity for the long-term arm, 30 °C/65% for the intermediate one, 40 °C/75% for accelerated storage, and a light-exposure arm that a dark cabinet cannot replace. The samples belong in the commercial pack rather than a laboratory jar; the pack is one of the things being tested. The assay has to be stability-indicating. HPLC with ultraviolet detection follows the parent and the related substances; a titration on the pure salt cannot see a degradant that still carries the titratable group. Test assay, loss on drying, pH, appearance, related substances and microbiology at each point, and record the individual results rather than a pass statement. Time points of 0, 1, 2, 3 and 6 months cover the accelerated arm; 0, 3, 6, 9, 12, 18 and 24 months cover long-term storage. Where the ingredient goes into a finished product, run the study again in the finished matrix, at the pH and thermal load the process actually applies. A bulk-powder result does not transfer to a beverage, a gummy or a stick pack, and the finished product's shelf life belongs to the finished product. ## The finished formula changes the answer Tablets and capsules are the easiest case, but not a free one. The fill starts dry, yet excipient water, an alkaline excipient and trace metals from a mineral partner can all move the pH or catalyse loss locally. Check loss on drying and appearance at release and again after storage, and keep the mononitrate away from strongly alkaline components in the blend. Stick packs are a dry matrix with a fine powder: the seal is the weak point, because a pinhole in the laminate is enough to let humid air in. Inspect the strip as well as the powder, and control the humidity of the filling room. A beverage combines pH, heat, oxygen and light; the acidulant and the process are formulation decisions, and an overage is only defensible when the loss has been measured in that matrix. An overage chosen without data is a guess with a label attached. ## How the shelf life is set No single shelf-life figure applies to thiamine mononitrate: the pack and the way it is stored decide the period. The retest period is written into the specification and backed by data generated in that pack; a figure with no pack, condition or test panel behind it is not a shelf life. The powder receives a retest period in its original unopened pack, and the finished product gets its own date from its own data. When the retest period ends, assay the retained sample again before extending it. Never extend on assumption, and never apply a bulk number to a container filled somewhere else. The product hub has the pack list; the COA page covers the release tests; the MOQ page covers pack and lead time; the methods library includes the HPLC assay; the quality page describes the release workflow, and the hydrochloride product page covers the acid-soluble salt. ### 04 Thiamine mononitrate: MOQ, packs and ordering URL: https://nutrition.rainwoodbio.com/products/vitamins/thiamine-mononitrate/moq/ Reviewed: 2026-11-20 Thiamine mononitrate begins at 1 kg in a foil pouch; production quantities travel in a 25 kg fiber drum. The standard 80 mesh powder is quoted at 1–7 days, and a granulated form is a separate quotation. To make an offer comparable, six details have to be on it: the salt and CAS number, the assay basis, the quantity and pack, the destination and Incoterm, the documents, and the intended market. In one lineA kilogram is the smallest unit that can be sampled, tested and kept as a traceable lot, so the minimum is set by traceability, not by volume. ## Why the order starts at a kilogram A 1 kg pouch covers a bench trial, material to retain and a check by an outside laboratory, and it ships as a parcel without a pallet. It is also the smallest unit that carries its own lot code, so the powder in the pouch, the lot on the certificate and the retained sample can be tied together. That link is the reason for the minimum, not the size of the bag. Under a kilogram, the powder has to be taken from a larger lot and repacked. That adds a handling step, breaks the link to the original pack and leaves a split that is not a standard pack. The 25 kg drum is the bulk unit: less handling per kilogram, but it ties up inventory and storage time. A buyer who needs only a few grams is better served by a written split of a named lot than by treating a sample as the product. ## Packs and the products they suit Thiamine mononitrate pack formats | Pack format | Fill | Where it fits | Handling note | Foil pouch | 1 kg | Trials, small batches, samples | Foil keeps out light and moisture; close it after use | Fiber drum | 25 kg | Production runs | Food-grade liner; the lot code appears on drum and liner | Granulated powder | Quoted on request | Better flow, less dust | Sold against its own particle specification The pack is a moisture and light barrier because the material is both light-sensitive and mildly hygroscopic. The foil pouch is the practical unit for a trial; the drum relies on its inner liner, so keep the liner closed and record the opening date. Granulation is not a packing option: it changes the particle-size line, the flow and the dissolution time, and it is quoted as a separate specification. ## Lead time and dispatch We quote 1–7 days from confirmation for the standard powder. The clock covers order picking, the documents and handover to the carrier; transit, customs and the buyer's own release sit outside it. A granulated grade, a non-standard pack or a specification change takes longer, and the quotation should say so separately rather than hide it inside the same range. Ask for a dispatch date, not only a range. A 1 kg pouch normally moves as a parcel; a 25 kg drum moves on a pallet, and the Incoterm decides who books the freight and who clears entry. Send the certificate and the other lot documents with the pack: a drum held in quarantine for missing paperwork has still arrived late. ## What the quotation should state Six details make an offer comparable: - Product and salt. Thiamine mononitrate, CAS 532-43-4, with the salt written out rather than “vitamin B1”. - Specification. Assay and its basis, loss on drying, pH, particle size, the metal panel and micro limits. - Order size and pack. Foil pouch (1 kg), fiber drum (25 kg), or a granulated variant with its particle line. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, specification, SDS and any market statement the importer needs. - Intended use and market. Supplement, food or another use, and the market where it will be sold. An offer that omits the salt or the market cannot be compared. The same powder may suit one destination and fall outside the file for another, and the paperwork is part of the offer. Commercial terms belong on the quotation, not on this page. ## The sample is a lot, not a demonstration The 1 kg pouch is the qualification sample. Check identity, assay, loss on drying, pH and microbiology before scaling, and keep part of the same pack as the retained sample. Sample, certificate and quotation should carry the same lot code; without that link the powder demonstrates but does not qualify. For a trial smaller than a kilogram, ask for a written split and record its lot code beside the trial results. The split is drawn from a bulk lot, carries its own handling record and is not the 1 kg foil pack. Bench powder and production powder can come from different lots even when both meet the specification, which is why the trial report should name the lot behind it. ## Terms to settle before the first order The quotation and the quality agreement should put the commercial and quality terms on one page: Incoterm, pack, dispatch window, the specification revision, a certificate for each lot, the retained sample, the retest period, and the route for a source, process or pack change. Settle those before the first production order; the same conversation is harder after a dispute. If a lot misses the agreed specification, the evidence is the retained sample and a joint re-test using the named method, not a photograph of the drum. The agreement should name the referee laboratory and say who pays for it. A return argued from appearance alone is difficult for either party to defend, and when two laboratories disagree the assay basis is the first thing to check. The product hub lists the catalog specification and the packs; the COA page lists the release tests; the compliance page covers the market files; the methods library describes the assay; the quality page covers release and the retained sample, and the hydrochloride product page is the other salt. ### 05 The regulatory file for thiamine mononitrate URL: https://nutrition.rainwoodbio.com/products/vitamins/thiamine-mononitrate/compliance/ Reviewed: 2026-11-20 Thiamine mononitrate is a vitamin B1 source with a long food and supplement history, and the regulatory file starts with the exact salt rather than the vitamin name. The EU framework is Directive 2002/46/EC and, for fortified foods, Regulation (EC) No 1925/2006; the US framework is the GRAS listing for food use and the dietary-supplement rules for supplements. The buyer's regulatory team confirms that the route covers the finished product in the destination market. The sections below set out the paperwork and the checks that belong in that file. In one lineThe permission belongs to the salt and the market, not to “vitamin B1”: the file has to show the name, the route and the label the destination requires. ## What the file contains The file holds four things at once: the specification version for thiamine mononitrate, the certificate that released each lot, the limits and labelling rules for the finished product, and a change-control record for the source, the process and the pack. The certificate reports the lot, the technical data sheet states the specification and the safety data sheet covers handling. None of those settles the destination route, which is recorded separately. Start the folder with a document list that carries a version and a date. The specification revision on the quotation, the certificate and the label review should agree; a set that mixes revisions is a frequent audit finding, and an avoidable one. ## European Union Directive 2002/46/EC harmonises food supplements, and Annex II to that directive carries the vitamin B1 forms, with thiamin mononitrate named among them as of this review. For vitamins and minerals added to foods, Regulation (EC) No 1925/2006 sets the parallel framework and its Annex II carries the form list. Labelling follows Regulation (EU) No 1169/2011: the ingredient list names the salt, the nutrition declaration gives thiamine per portion, and the reference value for thiamine is 1.1 mg in Annex XIII. A listing is the start of the route, not the end. The member-state notification, the maximum level the destination applies, the finished-product dose and the label language all sit on top, and the buyer's regulatory team confirms them. The EU regulatory notes collect the framework references; check the consolidated text rather than a summary. ## United States For food use, 21 CFR 184.1878 affirms thiamine mononitrate as generally recognised as safe as a direct human food ingredient, used as a nutrient supplement within current good manufacturing practice. That affirmation is a food route; it does not by itself position a dietary supplement. In a supplement, the ingredient is declared under the dietary-supplement framework, with the thiamine amount in the Supplement Facts panel under 21 CFR 101.36 against a Daily Reference Value of 1.2 mg under 21 CFR 101.9. Structure/function wording needs evidence behind it and the DSHEA disclaimer; disease claims are not available. What the certificate supports is the material, not the wording on the pack. The buyer confirms which basis is being relied on and that it extends to the finished product. ## Contaminants and the nitrate contribution Contaminant limits apply to what is swallowed, so the calculation starts from the finished-product dose and works back to the drum. The table is a starting point; the destination text and the dose decide the final figure. Contaminant and nitrate levels to check against the dose | Parameter | Reference level for a supplement | Evidence to keep | Lead (Pb) | 3.0 mg/kg of the supplement as sold | The measured lot figure, its method, the limit and the dose-based calculation | Cadmium (Cd) | 1.0 mg/kg of the supplement as sold | The measured figure and any exception the destination text allows | Mercury (Hg) | 0.10 mg/kg of the supplement as sold | The measured figure and the method behind it | Arsenic (As) | Customer or market limit | The agreed limit and the method, stated on the certificate | Nitrate (NO3) | Counter-ion; ADI 3.7 mg/kg body weight per day | The salt quantity per dose and the nitrate it carries Nitrate is the line that separates this salt from the hydrochloride. The mononitrate is 18.9% nitrate by mass, so a 100 mg thiamine dose taken as the mononitrate is about 123 mg of salt and about 23 mg of nitrate. That is under a tenth of the 259 mg that the ADI corresponds to for a 70 kg adult, but it is a number the file should be able to show. Nitrate limits in Regulation (EU) 2023/915 are written for named foods such as leafy vegetables; the buyer confirms whether any entry touches the finished product. ## Claims and the label In the EU, the authorised thiamine claims in the Union Register cover energy-yielding metabolism, the normal functioning of the nervous system, normal psychological function and the normal function of the heart. The wording has to come from the register and the condition has to be met: the “source of” threshold in the Annex to Regulation (EC) No 1924/2006 is 15% of the nutrient reference value per 100 g, or 7.5% per 100 mL for liquids. A claim is not created by the certificate and not repaired by a higher assay. The label names the salt. The EU list spells the form “thiamin mononitrate”; the US ingredient statement uses the common name “thiamine mononitrate”; the UK uses retained labelling rules and its own reference value. Naming the hydrochloride on a pack filled with the mononitrate is a misdescription, even when the thiamine figure is right. This site publishes specifications only and makes no health claim. ## Documents for the file The buyer's file needs the certificate with the HPLC assay and its basis, the infrared identity, loss on drying, pH, the metal panel and the micro count. Add the specification and its revision, the technical data sheet, the safety data sheet, the allergen statement, the GMO statement, the origin and manufacturing-source record, the residual-solvent statement and a BSE/TSE statement if the destination asks for one. For the EU, add the positive-list citation and the member-state route; for the US, the basis relied on for the supplement. The product hub carries the catalog specification; the COA page explains the lot certificate; the identity page covers the analytical evidence; the quality page describes the release file; the methods library covers the tests, and the hydrochloride file is the parallel case. ## Checklist before the first order - Specification version, CAS 532-43-4 and the salt name are stated. - Certificate, technical data sheet, safety data sheet, allergen, GMO, origin and residual-solvent statements are on file. - The contaminant results are converted to the finished-product dose. - The nitrate contribution is calculated and compared with the ADI. - The label name and the claim wording are reviewed for the destination. - Change control covers the source, the process and the pack. ### 06 How to prove a thiamine mononitrate lot is the nitrate salt URL: https://nutrition.rainwoodbio.com/products/vitamins/thiamine-mononitrate/identity/ Reviewed: 2026-11-20 A lot can be called thiamine mononitrate when four checks line up: the paperwork names the form and its CAS number, HPLC retention and the infrared spectrum agree with the reference, nitrate sits near the theoretical 18.9% while chloride is below the limit of detection, and the assay with loss on drying accounts for the rest of the mass. A percentage on its own cannot separate this salt from the hydrochloride, a blend or a diluted powder. In one lineRetention and infrared say thiamine; nitrate says this salt; chloride and moisture close the case. ## Four checks, four questions A name on a certificate is a claim, not a proof. Each check below answers a different question and needs its own evidence; a supplier who replies only to the first has shown the paperwork, not the powder. Four checks of thiamine mononitrate identity | Check | What it rules out | Evidence | Paperwork | A wrong name or CAS number | Salt name, CAS 532-43-4, formula | Chromatography | A different vitamin or a missing peak | HPLC retention time and the peak spectrum | Counter-ion | The hydrochloride or a blend | Nitrate near 18.9% and chloride absent by ion chromatography | Mass balance | A dilution or excess water | Assay, loss on drying and related substances ## HPLC and infrared: the molecule and the solid A usable HPLC method states its column, mobile phase, detection wavelength and standard. Identity is retention time plus a spectrum of the peak; a single peak at the right time can still be a different thiamine salt, because the cation is the same. The infrared spectrum answers the second question: the nitrate absorption and the fingerprint region compare the whole solid with a reference, so a hydrochloride lot does not match a mononitrate reference. Ask for the chromatogram and the infrared spectrum, not only the percentage. A certificate that reports “HPLC and IR conform” without the reference or the spectrum has given a conclusion. The infrared method note explains what the comparison can and cannot show. ## The counter-ion ratio: proving the nitrate salt Thiamine mononitrate is one thiamine cation to one nitrate ion. The theoretical nitrate content is 62.00 ÷ 327.36 = 18.9% by mass, and the thiamine content is 81.1%. A nitrate result close to 18.9%, with a chloride result below the method's detection limit and an assay near 100%, is consistent with the mononitrate. A nitrate result far under 18.9%, including none detected, suggests the hydrochloride, a diluted powder or another salt; a figure above the theoretical value points to a nitrate-rich diluent or a blend. The hydrochloride is the practical alternative, and it has the opposite pattern: two chlorides, about 21.0% chloride by mass, and no nitrate. That makes ion chromatography the cleanest discriminator between the two commercial salts, better than appearance and better than the assay. Sodium is not part of either salt, so a sodium result is a dilution signal rather than an identity test. The pH line supports the counter-ion. A 5% solution at 6.5–7.5 fits the mononitrate; a hydrochloride solution is acidic. pH is not quantitative and moves with concentration, so it is a check, not the proof. ## X-ray diffraction: the solid-state check X-ray diffraction answers a different question: is the solid crystalline, and does its pattern match a reference? It can distinguish a crystalline salt from an amorphous carrier or a dilution, and it can compare lots from two sources. It is not a purity assay and it does not measure the counter-ion. Before accepting a “match”, ask which reference pattern was used and what the detection limit was. For a disputed lot, diffraction plus ion chromatography plus HPLC is stronger than any one of them. Diffraction is not a routine release test for this product; a certificate that says only “XRD conforms”, with no pattern attached, has added little. The method earns its place when the question is solid form, for example when a granulated or milled grade behaves differently from the reference. ## What adulteration looks like Substitutions and the signals that expose them | Adulterant | What it does | Signal | Test | Thiamine hydrochloride | Same vitamin, different counter-ion | Chloride present; nitrate absent; acid pH | Ion chromatography, pH, infrared | Carbohydrate diluent | Lowers the assay per gram | Assay low; strong O–H band; different LOD | Assay, infrared, loss on drying | Other B vitamin | Colour or assay shift | Yellow tint; extra HPLC peak | HPLC with ultraviolet detection | Moisture | Raises loss on drying; lowers the as-is assay | LOD above 1.0%; dried-basis assay normal | Loss on drying, assay basis | Degraded lot | Lower potency; off-colour powder | Related substances; grey or yellow cast | HPLC related substances, appearance Appearance is the weakest signal. White to off-white covers a wide range, and a grey or yellow cast can come from drying, light exposure or a contaminant. The stronger signals are the counter-ion, the infrared match and the mass balance. A certificate that reports appearance and assay but no identity has left the most likely substitution untested. ## How to write identity into the specification - “Thiamine mononitrate, CAS 532-43-4, C12H17N5O4S.” - “Assay 98.0–101.0% by HPLC; the certificate states the basis.” - “Identification by HPLC retention, ultraviolet spectrum and infrared spectrum against a reference.” - “Nitrate about 18.9% by ion chromatography; chloride below the detection limit.” - “Loss on drying ≤1.0%; pH 6.5–7.5 in 5% solution.” - “No related substance above the stated limit; particle size ≥95% through 80 mesh.” - “Destination market and salt form confirmed before the order.” ## Five questions for the supplier - Which salt form is this lot, and which CAS number is on the certificate? - Can you provide the HPLC chromatogram and the infrared spectrum, not only the assay percentage? - What are the nitrate and chloride results by ion chromatography, and what are the detection limits? - What is the loss on drying, and on which basis was the assay calculated? - If we disagree about a result, will you re-test the retained sample at a laboratory we both accept? Five straight answers make an identity file; one assay figure does not. The product hub carries the catalog specification; the COA page shows where each of those figures is reported; the grades page compares the physical forms; the level-four comparison covers the label consequences; the hydrochloride identity page is the mirror test for the other salt, the hydrochloride product page is its specification, the methods library describes the tests, and the quality page covers release. ### 01 What the COA for vitamin D3 oil actually contains URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-d3-oil/coa/ Reviewed: 2026-11-20 The certificate for a vitamin D3 oil lot reports appearance, identification by HPLC and UV, potency in IU per gram, peroxide value, the heavy-metal panel and microbiology. The method, the limit and the measured result should each have their own column. The figures below are the catalog specification for the 1.0 MIU/g oil; the batch COA confirms a particular bottle. In one linePotency on a D3 oil certificate is an as-is figure in IU per gram, and it means little without the peroxide value and the HPLC identity beside it. ## The certificate as a test report An audit reads the certificate row by row. A line is complete when it says what was measured, how, and against which limit the lot passed. “Conforms” alone is a conclusion with the working removed; the method and the measured figure are the working. The identity row and the potency row answer different questions. HPLC retention and the UV spectrum say the peak is cholecalciferol; the IU figure says how much of it sits in the oil. A certificate that prints only the IU figure has measured the second question and skipped the first. Identity, potency and contaminants · vitamin D3 oil | Parameter | Method | Release limit | Appearance | Visual | Clear, pale yellow oil | Identification | HPLC retention and UV spectrum | Conforms to the reference | Potency | HPLC with UV detection | 1.0–1.1 MIU/g | Peroxide value | Iodometric titration | ≤10.0 meq O₂/kg | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Carrier | Specification and batch record | Named on the specification and the certificate ## IU per gram, not a percentage The potency of an oil is reported in IU per gram, not as a percentage. One microgram of cholecalciferol is 40 IU, so 1.0 MIU/g is 1,000,000 IU/g, 25,000 µg/g, 25 mg/g and about 2.5% by mass. The top of the range, 1.1 MIU/g, is 27,500 µg/g, or 2.75%. The oil is measured as received. There is no anhydrous basis and no loss-on-drying line, unlike the spray-dried powder where moisture enters the assay calculation. The number on an oil certificate is IU per gram of oil as weighed, and the peroxide value sits beside it as a separate quality result. Confirm how the conversion was made. An HPLC result is usually produced as micrograms per gram against a cholecalciferol standard and multiplied by 40; the certificate should state the detection wavelength and the standard. An IU figure with no conversion note is harder to audit, and a figure copied from a supplier’s marketing sheet is not a result. ## Release limit versus batch result The limit tells the reader where acceptance stops, while the result tells them what this lot actually contained. Keep them apart: a column that repeats the range has restated the limit rather than reported a measurement. The method belongs beside both. What the result column should contain | Parameter | Release limit | Result column | Potency | 1.0–1.1 MIU/g | A measured IU/g figure with the method and the standard | Peroxide value | ≤10.0 meq O₂/kg | A measured figure in meq O₂/kg | Identification | Conforms to the reference | The retention time and the spectrum statement | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot | Appearance | Clear, pale yellow oil | A description of the lot as received ## What moves between batches Three things move between oil lots: the potency of the concentrate, the peroxide value of the carrier, and the colour of the oil. Potency moves with weighing, dilution and the standard. Peroxide value moves with the age and quality of the carrier, the antioxidant package and the headspace in the bottle. Colour moves with the carrier lot. The catalog range is 1.0–1.1 MIU/g. A lot at 1.02 MIU/g and a lot at 1.09 MIU/g are both inside it, and a formula weighed at 1.0 MIU/g receives up to 10% more IU from the second. That is a reason to record the IU/g used in the weigh-up, not a reason to reject the lot. A drift across several lots carries more weight than any single number close to its limit: peroxide climbing, potency drifting down, or colour darkening. The certificate’s lot code should be traceable to the bottle and to the sample kept in the retain room. ## When to order an outside test Independent testing earns its cost at four moments: a new source, a first export to a regulated market, a potency disagreement, or a peroxide result near the ceiling. The useful panel is HPLC with UV spectrum for identity and potency, peroxide value, ICP-MS for the metal panel, microbiology, and a fatty-acid profile by GC if the carrier oil is in question. Add a vitamin D2 screen when the label names D3 and the lot looks unusual. D2 has a different retention time and a different spectrum, and the assay alone may not separate the two. Ask the laboratory to report its detection limit and to tie the report to the lot code, not only to the product name. Chain of custody matters. The material that goes to the laboratory should be the material in the retain sample, and the report should carry the lot code. In a dispute, hand the referee the retain sample, the supplier’s certificate and the agreed specification, and ask for the discriminating tests rather than a second run of the same potency method. ## What to compare between suppliers Compare six fields: form and CAS number; IU/g and the method; carrier oil; antioxidant package; peroxide value; pack and lot code. Two offers that agree on IU/g but differ on the carrier or the antioxidant are not the same oil, even when the certificate headline matches. Traceability forms the second layer. The certificate should identify the manufacturer, the carrier batch and the pack that was filled. The product hub lists the catalog values. The spray-dried D3 page shows how the same molecule is specified on a solid carrier; the analytical methods index explains what each test proves; the quality page describes the release workflow. ### 02 Choosing a vitamin D3 oil grade: potency, carrier and form URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-d3-oil/grades/ Reviewed: 2026-11-20 Vitamin D3 oil is supplied at 1.0–1.1 MIU/g, and the grade decision is mostly about the carrier and the dosage form rather than the molecule. The same cholecalciferol is available as this oil, as a powder on carrier on request, and as the 100,000 IU/g spray-dried powder on the D3 page. Each form carries a different mass per dose, a different label and a different handling rule. In one lineThe grade is set by the carrier and the IU per gram, because those two decide the mass in the fill, the words on the label and the process the vitamin has to survive. ## Why the grade is a carrier decision Cholecalciferol is the same molecule in every grade; what changes is how much oil or powder carries it. A grade is a concentration plus a carrier plus a specification, and the three are bought together. A purchase order that names only “vitamin D3” has not chosen any of them. The oil is a concentrate. At 1.0 MIU/g, one gram carries 1,000,000 IU, so a 1,000 IU dose is one milligram of oil. That is why the oil is weighed as a concentrate into a larger fill, not dispensed by the milligram at the filling line. The powder is a formulation in the same sense. At 100,000 IU/g, one gram carries 100,000 IU, and a 1,000 IU dose is ten milligrams of powder. The carrier is declared, and at that concentration it makes up the bulk of the mass. The oil is not diluted with a solid, but its carrier is still part of the specification. Neither form is the higher grade in a quality sense. They are different tools for different dosage forms, and the IU per gram is the number that lets a buyer compare them without confusing potency with purity. ## The forms side by side Vitamin D3 forms and what one gram carries | Form | Potency | Carrier | Typical dosage form | Oil, this product | 1.0–1.1 MIU/g (1,000 IU/mg) | Food-grade oil, named on the specification | Softgels, oil blends | Spray-dried powder, 100,000 IU/g | 100,000 IU/g (100 IU/mg) | Starch, gum arabic or maltodextrin, declared | Capsules, tablets, stick packs | Spray-dried powder, 400,000 IU/g | 400,000 IU/g (400 IU/mg) | Declared on the specification | Small-dose capsules and tablets | Powder on carrier, on request | Agreed potency | Declared on the specification | Dry blends The oil is about ten times the potency of the 100,000 IU/g powder per gram. That does not make it better or worse; it makes the weighed amount smaller, so the balance, the dilution step and the mixing time carry more of the total error. Within the oil there is one catalog grade, 1.0–1.1 MIU/g. A different IU/g is a different specification, not a packing option, and it should be requested before the quotation. A formulator who needs a lower concentration in the finished fill usually dilutes the concentrate in the fill, where the carrier can be chosen for the shell, the process and the label. ## Appearance, solubility and handling The oil is clear and pale yellow. It is insoluble in water and soluble in fats and organic solvents, and it mixes with other triglyceride oils. That miscibility is what makes it usable in an oil blend or a softgel fill. It does not disperse in water without an emulsifier, so a drink mix is not its natural home. Viscosity follows the carrier. A chilled oil thickens and can cloud; warm it gently and mix before weighing, and do not read a cloud as a potency change. The amber bottle is a light barrier, not a measuring device, and the headspace above the oil is where oxidation starts once the bottle is opened. The powder is the opposite physical profile: white to cream, free-flowing and water-dispersible, with a declared carrier and, in the sibling specification, at least 95% through 40 mesh. It is the form for a dry blend or a tablet; the oil is the form for a lipid fill. That specification is published on the spray-dried D3 page. ## Dose arithmetic and the label The arithmetic is fixed: one microgram of cholecalciferol is 40 IU. The EU reference intake for vitamin D is 5 µg/day (200 IU) and the US Daily Value is 20 µg (800 IU); those are label references, not a dose recommendation. With the 1.0 MIU/g oil, 1,000 IU is 25 µg and 1 mg of oil; 5,000 IU is 125 µg and 5 mg; 10,000 IU is 250 µg and 10 mg. With the 100,000 IU/g powder, the same doses need 10, 50 and 100 mg. With a 400,000 IU/g powder they need 2.5, 12.5 and 25 mg. A softgel fill is usually much larger than the milligram of concentrate, so the rest of the fill is carrier oil chosen for the shell and the process. The label declares the vitamin, not the concentrate weight. Keep the IU/g of the concentrate in the batch record so the weigh-up can be checked at release. At 1.1 MIU/g, every milligram carries 1,100 IU. If the formula is calculated at 1.0 MIU/g and the lot assays at 1.1, the unit is 10% over the calculated IU unless the weigh-up is adjusted. Decide whether each batch is weighed on the certificate result or on a fixed 1.0 MIU/g assumption, and write that rule into the specification. ## What to write into the specification - “Cholecalciferol oil, CAS 67-97-0, C27H44O, 1.0–1.1 MIU/g by HPLC.” - “Carrier oil named; antioxidant package named; peroxide value ≤10.0 meq O₂/kg.” - “Identification by HPLC retention and UV spectrum; state the detection wavelength.” - “Heavy metals and microbiology as listed; appearance clear, pale yellow oil.” - “Pack 1 kg or 5 kg amber bottle; storage condition and retest period stated.” - “Destination market and label units agreed before the first order.” ## When the other form is the better choice The powder is the better choice for a tablet, a hard capsule, a stick pack or a dry blend, where a liquid fill would need a carrier and an extra process step. The oil is the better choice for a softgel, an oil blend or a lipid-based fill, where a powder would have to be suspended and kept in suspension. A switch between the two is not a unit conversion. The fill weight, the carrier declaration, the stability file and the label all change. The oil-versus-powder comparison takes the carrier, the overage and the label further. The product hub carries the catalog specification, the compliance page covers the market file, the methods index explains the assays and the quality page describes release. ### 02.1 Vitamin D3 oil vs spray-dried powder: carrier, overage and the label URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-d3-oil/grades/vitamin-d3-oil-vs-powder/ Reviewed: 2026-11-20 The oil and the spray-dried powder carry the same cholecalciferol but not the same mass, carrier or label. The oil is 1.0–1.1 MIU/g; the spray-dried powder on the D3 page is 100,000 IU/g, so the oil is about ten times the potency per gram. That difference decides the fill weight, the carrier declaration and how much overage the formula needs. In one lineOil and powder are the same molecule at different concentrations and in different carriers, so the switch changes the fill weight, the label and the stability risk together. ## The carrier is the difference Both forms are mostly carrier. At 1.0 MIU/g the cholecalciferol is about 2.5% of the oil, so the other 97.5% is the carrier and the antioxidant package. The 100,000 IU/g powder is 0.25% cholecalciferol; the remaining mass is carrier and a little moisture. The carrier is not an inert detail: it is what the label declares, what the process handles and what the stability file protects. The oil carrier is a food-grade lipid, usually a triglyceride oil, named on the specification. It is the fill itself in a softgel or an oil blend, and it must be miscible with the other oils in the formula. The powder carrier is a solid, declared on the sibling specification as starch, gum arabic or maltodextrin; it makes the vitamin free-flowing and water-dispersible, which is what a tablet, a hard capsule or a stick pack needs. The allergen question follows the carrier, not the vitamin. If the oil carrier is a soybean oil, the allergen declaration follows it in the EU and the US; a powder whose carrier is a starch or gum does not inherit that declaration, but it has its own source statement. Ask which carrier is in the lot and read the ingredient list against it. ## The same dose in two masses One microgram of cholecalciferol is 40 IU, so 400 IU is 10 µg and 10,000 IU is 250 µg. The concentrate is weighed by the milligram, while the powder is weighed by the tens of milligrams. The table shows what the same label dose costs in mass on each side. The same dose in oil and in the 100,000 IU/g powder | Label dose | Micrograms | Oil at 1.0 MIU/g | Powder at 100,000 IU/g | 400 IU | 10 µg | 0.4 mg | 4 mg | 1,000 IU | 25 µg | 1 mg | 10 mg | 5,000 IU | 125 µg | 5 mg | 50 mg | 10,000 IU | 250 µg | 10 mg | 100 mg A softgel fill is much larger than one milligram, so the rest of the fill is carrier oil chosen for the shell and the process. The oil is therefore a concentrate that is diluted at the filling step, not a fill on its own. The powder needs no such dilution for a 10 mg dose, but a 1,000 IU stick pack built on it is mostly carrier too, and the carrier has to be declared in the same way. ## The overage is a formula decision The catalog range of 1.0–1.1 MIU/g gives a formulator up to 10% more IU per gram at the top of the range. That is a specification tolerance, not an overage. The overage is the extra vitamin added to the finished formula so the label claim is still met at the end of the shelf life, and it is justified by the stability curve for the pack. Do not double count the two. If the master formula is calculated at 1.0 MIU/g and the lot assays at 1.1 MIU/g, the batch already carries 10% more than the calculation; a further 10% overage on top gives about 21% over the target at release. The release potency, the label claim and the stability loss have to be written into the same calculation. The failure routes differ. Oil loses potency through oxidation, and the peroxide value is the early warning; powder loses potency through light exposure and moisture pickup, and the loss on drying is the early warning. An overage taken from a powder stability file does not transfer to an oil, and the reverse is also true. The overage is a finished-product decision, and it never repairs a pack that lets light or oxygen in. ## What the label has to declare The label names the vitamin, not the concentrate. In the EU, the ingredient is declared as vitamin D3 or cholecalciferol, with the amount per daily portion in micrograms and as a percentage of the 5 µg reference intake. In the US, the Supplement Facts panel declares vitamin D3 (cholecalciferol) in micrograms and as a percentage of the 20 µg Daily Value. The carrier and the antioxidant appear in the ingredients list in both markets. Label elements for the two forms | Element | EU | US | Nutrient name | Vitamin D3 or cholecalciferol | Vitamin D3 (cholecalciferol) | Amount and reference | µg per daily portion; % of 5 µg NRV | µg per serving; % of 20 µg Daily Value | Carrier | In the ingredients list; allergen statement where required | In the ingredients list; allergen statement where required | Dispersion wording | Only if the form supports it | Only if the form supports it The oil is not water-dispersible; a “water-dispersible” claim needs the powder or an emulsified oil with its own stability data. A label written for one form does not transfer to the other, even when the IU per unit is the same. ## Handling follows the form The oil goes into an amber bottle because light and oxygen are its failure route; the powder goes into a foil pouch because moisture and light are its failure route. A softgel protects the fill with an opaque shell and a low-oxygen environment; a stick pack protects the powder with a foil barrier and a sealed seam. Neither pack can be swapped for the other without a new stability file. At the bench, the oil is warmed gently and mixed before weighing, and the bottle is closed between uses; the powder is kept dry and resealed, and the pouch is not left open in a humid room. Both are sensitive to heat, and neither should be stored in a hot loading bay. The oil stability page carries the full protocol. ## When to choose the oil and when the powder Choose the oil for a softgel, an oil blend or a lipid-based fill, where a liquid carrier is needed and the concentrate can be diluted in the fill. Choose the powder for a tablet, a hard capsule, a stick pack or a dry blend, where a free-flowing, water-dispersible solid is needed and the carrier can be declared on the label. A switch is a new specification, a new label and a new stability file, not a unit conversion. The oil product page carries the oil specification; the spray-dried powder page carries the powder; the grades page places the two in the wider range; the compliance page covers the market file; the methods index explains the assays; the quality page describes release. ### 03 Vitamin D3 oil is oxidation-sensitive; the bottle sets the shelf life URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-d3-oil/stability/ Reviewed: 2026-11-20 Vitamin D3 oil keeps only when the carrier, the antioxidant and the bottle are treated as parts of the specification. Light, heat and oxygen attack the oil, the peroxide value rises, and the cholecalciferol is lost along with the carrier. The pack and the storage condition belong in the stability file, not in a footnote. In one lineThe oil fails by oxidation before it fails by moisture: light, heat and oxygen raise the peroxide value, and the potency follows once the carrier has been attacked. ## Dry storage, the cap and the headspace An oil is hydrophobic, so moisture is not the main variable in the way it is for a powder. What matters is the seal, the headspace and the condensation that can form when a cold bottle is opened in a warm room. Store the bottle dry, sealed and upright, and let it reach room temperature before opening it. The amber glass is a light barrier, not a hermetic one. The cap liner is the seal, and a bottle that has been opened and closed repeatedly holds more oxygen in its headspace than a freshly filled one. A one-kilogram bottle that will be used over several weeks is better split into smaller amber bottles than opened and closed at the bench every day. Humidity still belongs in the record. A humid store attacks the label, the cap and the carton, and condensation on the bottle neck can enter the oil when the cap is removed. The storage condition on the specification is a real instruction, not a formality. ## The oil is already a solution Cholecalciferol is dissolved in the carrier, so the oil is a solution rather than a suspension. The concentration is fixed at 1.0–1.1 MIU/g, and dilution in the finished fill does not change the oxidation chemistry; it changes the volume, the surface area and the amount of oxygen available per unit of vitamin. In a softgel fill the oil may be blended with other triglycerides and with an antioxidant. The blend must be miscible, and the antioxidant has to be chosen for the carrier, not copied from another formula. An emulsion adds an oil–water interface and a new set of stresses, and its stability has to be measured in the emulsion rather than inferred from the bulk oil. The vitamin is sensitive to ultraviolet light, and a clear container on a bench is an exposure even when the room looks dim. The amber bottle, the opaque softgel shell and the secondary carton are layers of the same protection; removing one of them shortens the useful life of the oil. ## What drives degradation Factors that move vitamin D3 oil during storage | Factor | What it does | Control | Light | Photodegradation of the vitamin; colour and potency change | Amber bottle, opaque shell, dark store | Oxygen | Lipid oxidation; peroxide value rises | Low headspace, sealed cap, antioxidant | Heat | Accelerates oxidation and potency loss | Controlled store; cool process | Trace metals | Catalyse oxidation at low concentration | Avoid iron and copper contact; check the panel | Carrier unsaturation | A polyunsaturated oil oxidises faster than a saturated one | Choose and declare the carrier; monitor peroxide | Antioxidant | Consumed as it protects the oil | Declare the package and its level; do not assume carry-through The factors interact. A warm, bright store with a half-empty bottle adds heat, light and oxygen at once, and the peroxide value climbs faster than any single factor would suggest. The question that matters is not whether vitamin D3 is stable in general, but how long it holds in a named carrier, pack and condition. ## A stability protocol for the oil A protocol is only useful when it fixes the pack, the condition, the time points and the test panel. Warehouse behaviour is covered by 25 °C/60% RH long-term and 30 °C/65% RH intermediate storage; 40 °C/75% RH is the accelerated stress condition. A light-exposure arm is added because a dark incubator cannot see the failure mode that ultraviolet light drives. At each time point, measure potency by HPLC, peroxide value, appearance and UV identity. For a softgel, test the fill and inspect the shell; for a bulk bottle, test from the same lot and record the opening date. The report should list each result rather than a pass/fail summary, and name the pack and the lot family. Request the stability summary for the exact pack on order. A 1 kg bottle and a 5 kg bottle have different headspace-to-oil ratios and different opening histories, and the data belongs to the pack. A summary from a different pack is a starting point, not a substitute. ## The finished formula changes the answer A softgel combines the fill with a shell that controls water and oxygen transfer. The shell can lose water and become brittle, and the fill can migrate into the shell; both are shelf-life questions that the bulk oil data does not answer. Test the finished unit, not only the oil that went into it. An oil blend or a lipid-based stick pack has its own exposure: the blend may contain unsaturated oils that oxidise faster than the D3 carrier, and the pack may be more permeable than amber glass. The antioxidant package has to protect the whole blend, not only the vitamin. Overage is decided here, from the potency curve and the label claim at the end of the shelf life. It is a formulation decision supported by the stability file; it does not repair a bottle that lets light in or a fill that oxidises. The oil-versus-powder comparison covers how the overage differs between the two forms. ## How the shelf life is set No single shelf-life figure is published for vitamin D3 oil; the carrier and the pack determine it. A retest period in the specification is only as good as the stability file for that pack. A figure that lacks a pack, a condition and a test panel is a claim rather than a shelf life. Extension begins with a re-assay of the retain sample once the retest period has passed. Extension is never by assumption, and a bulk figure does not follow the oil into a repacked bottle. Pack sizes are on the product page, release tests on the COA page, pack and lead time on the MOQ page, the potency and peroxide methods in the methods index, and the release workflow on the quality page. ### 04 Vitamin D3 oil: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-d3-oil/moq/ Reviewed: 2026-11-20 The MOQ for vitamin D3 oil is 1 kg, supplied in a 1 kg amber bottle; the 5 kg amber bottle is the larger standard pack. The standard pack is quoted at 1–7 days. To price a firm offer, the supplier needs the IU/g, the carrier, the quantity and pack, the destination and Incoterm, the documents and the intended market. In one lineThe minimum is a bottle, not a batch: 1 kg is the smallest amber pack that carries its own lot code and retain sample. ## Why the minimum is 1 kg A kilogram of 1.0 MIU/g oil carries 1,000 MIU, or one billion IU. At 1,000 IU per unit that is one million units, so the minimum is not a consumption estimate; it is the smallest standard bottle that can be filled, labelled and traced. The concentrate is used by the milligram, and a kilogram is a bulk unit for a production run. An order below 1 kg has to be split out of a larger lot and repacked. Handling increases, the original bottle identity is lost, and tracing the pack becomes harder, while the molecule itself is unchanged. A bench trial that needs grams is a repack from a released lot, with its own handling record, not a catalogue bottle. The 5 kg bottle cuts handling per kilogram at the cost of inventory and a longer storage period. Choosing between them is about how the oil will be used, not about a discount. ## Packs and formats Standard vitamin D3 oil packs | Pack | Net weight | Typical use | Notes | Amber bottle | 1 kg | Trial, sample, small batch | Light barrier; cap liner is the seal; lot code on the bottle | Amber bottle | 5 kg | Production | Larger headspace; plan the in-use period after opening | Powder on carrier | On request | Dry blends | A different specification, not a packing choice The bottle is amber glass because the oil is light-sensitive. The cap liner is the seal, and once opened at the bench the bottle is no longer the sealed pack that left the fill line. The headspace contains oxygen; a smaller bottle filled to the shoulder leaves less of it. The powder-on-carrier option is a separate product with a solid carrier, a different potency and a different stability file. It is not a way to pack the oil, and it should be quoted as its own specification. ## Lead time and handover The standard pack carries a 1–7 day lead time from confirmation. The window covers picking, paperwork and dispatch. Transit, customs and the customer’s own quality release sit outside it. A non-standard pack or a powder-on-carrier order adds time, and the quotation should state it separately. Request the dispatch date in writing rather than relying on the range. A 1 kg bottle normally travels as a parcel; a 5 kg bottle may need a different outer pack and booking. The Incoterm assigns freight and entry clearance. Lot documents should leave with the bottle rather than trail behind it. ## What a quotation needs A quotation can be compared only when it states six things: - Product and form. Cholecalciferol oil, CAS 67-97-0, with the carrier named. - Specification. IU/g and method, carrier, antioxidant package, peroxide value, heavy metals and microbiology. - Quantity and pack. 1 kg amber bottle, 5 kg amber bottle, or a powder-on-carrier specification. - Destination and Incoterm. Where the pack is going: country, port or address, plus the trade term. - Documents. COA, specification, SDS, carrier and allergen statements, and any market-specific declaration the importer needs. - Intended use and market. The use (supplement, food or other), the dose, and the market of sale. Without the IU/g and the carrier, the offer cannot be compared. Two oils at the same IU/g can differ in the carrier, the antioxidant and the peroxide value, and the paperwork is part of the offer. Commercial terms are not published here; the quotation carries them. ## The sample is a lot, not a demonstration Qualification starts with a 1 kg bottle. Before scaling, check identity, potency, peroxide value and microbiology, and retain a sample from that bottle. Sample, COA and quotation should all show the same lot code. Without a lot code, the sample is only a demonstration. A trial needing grams is a repack. It comes out of a released lot, receives its own handling record, and is not the 1 kg amber bottle. Get the split confirmed in writing and file its lot code with the trial data; bench material and production material can come from different lots even under one specification. ## Terms to settle before the first order Commercial and quality terms belong on one page: Incoterm, bottle size, dispatch window, specification revision, a COA per lot, the retain sample, the retest period and the change route. A carrier change is a specification change, not a packing detail. If the oil is switched to a different carrier or a different antioxidant, the label, the allergen statement and the stability file all move, and the buyer should approve the change before the next lot. Write that into the quality agreement. A failed lot is settled on the retain sample by a joint re-test using the named method; a photograph of the bottle settles nothing. Name the referee laboratory, and say who pays for it, before a dispute arises. Neither party can defend a return based on colour alone. The catalog specification is on the product page; release tests are on the COA page; the market file is on the compliance page; the glossary defines MOQ; shipping is covered on the logistics page. ### 05 The regulatory file for vitamin D3 oil URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-d3-oil/compliance/ Reviewed: 2026-11-20 Vitamin D3 oil is cholecalciferol carried in a food-grade oil, so the regulatory file has to cover the vitamin, the carrier and the label that will declare both. The framework is set by the destination market; the buyer’s regulatory team confirms the route and the maximum level for the finished product. This page lists the documents and checks that belong in that file, not a legal opinion. In one lineThe molecule is the easy part; the file has to match the carrier, the IU declaration and the label wording to the market that will sell it. ## What the file contains Four strands make up the folder: the specification version for the oil, the lot certificate, the destination’s limits and label rules, and the change-control record for source, carrier and pack. The lot is described in the COA, the specification in the TDS, and handling in the SDS. The destination route is a separate document; none of the three establishes it. The folder also needs the carrier and antioxidant statements, allergen and GMO declarations, the origin record and any customer-specific declaration. A missing statement should be named while the order is still a quotation, because closing it at the port is expensive. Put a dated index at the front of the folder so every revision is visible. ## European Union For the EU, the route starts with Directive 2002/46/EC on food supplements and the labelling rules of Regulation (EU) No 1169/2011. Vitamin D has a reference intake of 5 µg/day in Annex XIII, and the label declares the amount per daily portion as a percentage of that reference. The member state sets the maximum level for the finished product, so the same oil can be inside the route in one market and outside it in another. Health claims sit under Regulation (EC) No 1924/2006 and the EU register, and contaminants under Regulation (EU) 2023/915 as amended. The tolerable upper intake level for adults is 100 µg/day in EFSA’s 2012 opinion; it is a safety reference the file may cite, not a labelling limit. Check the current consolidated texts as of this review, because the annexes and the contaminant limits are amended. ## United States In the US, the first question is whether the oil qualifies as a dietary ingredient for the intended use. The Supplement Facts panel declares vitamin D in micrograms and as a percentage of the Daily Value, which is 20 µg (800 IU) for adults and children four years and older. The supplier sets out the basis it relies on; the buyer then tests that the same basis reaches the finished product and the claim. For a food use rather than a supplement, vitamin D3 is addressed as a food additive in 21 CFR 172.380, and the carrier oil must itself be suitable for that use. Structure/function wording is examined separately, with substantiation on file and the DSHEA disclaimer on the label. Neither the label review nor the claim review is part of the certificate. ## United Kingdom Two regimes apply inside the UK. Great Britain uses the GB food information and food-supplement rules, with the same 5 µg reference intake; Northern Ireland applies the EU framework, including Regulation (EU) No 1169/2011, under the Windsor Framework. Which regime applies follows the delivery address; the buyer’s regulatory team should note it on the order so the label and the citation can be audited later. ## Contaminants and limits Contaminants have to be judged at the finished-product level, not merely from the bottle result. Those figures are only a starting point for a supplement file; the destination’s current text and the daily dose settle the final limit. The oil is used at milligrams per unit, so its contribution is small, but the file should still show the calculation rather than assume it. Contaminant limits to confirm for the finished product | Parameter | Catalog limit | What the file should show | Lead (Pb) | ≤3 mg/kg | Lot result, method and the finished-product contribution | Arsenic (As) | ≤2 mg/kg | Lot result, method and the agreed limit | Cadmium (Cd) | ≤1 mg/kg | Lot result and any category exception that applies | Mercury (Hg) | ≤0.1 mg/kg | Lot result and method | Peroxide value | ≤10.0 meq O₂/kg | A quality limit, not a regulatory one; report it beside the panel ## Claims for vitamin D3 In the EU, vitamin D claims are authorised only in the wording on the register and only when the conditions are met; examples as of this review are the maintenance of normal bones, normal muscle function and the normal function of the immune system. A claim written for a different form or a different nutrient does not transfer to this oil, and the daily-portion threshold has to be checked against the formula. A US structure/function statement requires substantiation and the DSHEA disclaimer; disease claims are outside the route. The carrier can raise a claim of its own, which is why the allergen and composition statements belong in the same review. This site publishes the specification and makes no health claim; the brand owner’s reviewer signs off the label for the destination. ## Documents for the file The buyer’s file needs the COA with the HPLC potency in IU/g, the UV identity, the peroxide value, the metal panel and the micro count. The specification must name the carrier, the antioxidant package and the IU/g; an oil certificate and a powder certificate are not interchangeable. The source and process description, TDS, SDS, allergen and GMO statements, origin record and the stability summary for the pack on order complete the set. The identity page shows how the form and the potency are proved, and the methods index explains the tests behind each line. ## Checklist before the first order - The specification names its revision, CAS 67-97-0 and the oil form. - The lot certificate, TDS, SDS, GMO and origin statements and the stability summary are in the folder. - Contaminant figures have been recalculated against the finished-product dose. - The units on the label and the claim wording have passed a destination review. - Any change of carrier, source or pack runs through change control. - All three documents — quotation, specification and certificate — cite one revision. The product hub carries the catalog specification; the EU regulatory notes and the US regulatory notes collect the framework references; the quality page describes the release file. ### 06 How we prove a vitamin D3 oil lot is cholecalciferol URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-d3-oil/identity/ Reviewed: 2026-11-20 A vitamin D3 oil lot is cholecalciferol when the documents, the HPLC retention and UV spectrum, the potency arithmetic and the carrier record agree. At 1.0 MIU/g the cholecalciferol is about 2.5% of the oil, so the identity evidence has to come from the chromatogram and the mass balance, not from the colour. The oil is a solution, and the carrier is part of the identity file. In one lineA D3 oil is identified when the chromatogram, the UV spectrum and the IU arithmetic agree, and when the carrier is on the record. ## The identity layers Naming the right material on paper does not prove that the material is in the bottle. Each layer asks a different question and needs evidence of its own. An answer that stops at the first layer has described a document, not a liquid. Five checks that together identify a vitamin D3 oil | Layer | Question | Evidence | What it proves | Document | Is the form and CAS named? | Cholecalciferol, CAS 67-97-0, C27H44O | Paperwork only | Chromatography | Is the peak cholecalciferol? | HPLC retention against a standard, with D2 separated | The molecule | Spectrum | Is the ultraviolet profile right? | UV maxima and absorbance ratios | The chromophore | Mass balance | Does the IU/g match the mass? | IU/g ÷ 40 = µg/g; compare with HPLC | The concentration | Carrier | What carries the vitamin? | Carrier name, fatty-acid profile, allergen statement | The full composition ## The IU ratio and the mass balance One microgram of cholecalciferol is 40 IU. The catalog oil at 1.0 MIU/g therefore contains 25,000 µg/g, which is 25 mg/g or 2.5% by mass; at 1.1 MIU/g it contains 27,500 µg/g, or 2.75%. Those figures are fixed by the definition of the IU, not by the supplier, and they are the arithmetic that ties the label to the certificate. The check runs both ways. Take the HPLC result in micrograms per gram and multiply by 40 to get IU/g; take the IU/g on the certificate and divide by 40 to get micrograms per gram. If the two do not agree, one of the numbers is wrong, and the certificate should show the conversion so the reader can repeat it. The carrier-to-vitamin ratio follows from the same figures: at 2.5%, there are about 39 parts of oil for every part of cholecalciferol. That ratio is why a small potency error is easy to make in a large batch and why the carrier record matters. It is also why a D2 substitution can pass a careless potency check while the retention time and the spectrum give it away. ## X-ray diffraction: what it can and cannot do here X-ray diffraction asks about the solid state: whether the material is crystalline and whether the pattern fits a reference. The oil is a liquid solution, so XRD is not a release test for it and a certificate that reports “XRD conforms” for an oil has added little. The technique belongs to the crystalline standard, to the spray-dried powder and to the carrier when a solid form is in question. XRD is still useful in a dispute. If a bottle throws a precipitate, isolate it and identify the solid; if the powder on carrier is the form being bought, the pattern can separate a crystalline carrier from an amorphous one. A match statement needs the reference pattern and the detection limit before it can be read. For the oil, the stronger evidence is HPLC with UV detection, the potency arithmetic and the carrier profile. The XRD method note explains what the pattern proves and what it does not. ## What adulteration looks like Common vitamin D3 oil substitutions and the signals | Adulterant | What it does | Signal | Test | Carrier dilution | Lowers IU/g; keeps the colour | Potency below the range; mass balance off | HPLC potency, IU arithmetic | Vitamin D2 | Cheaper source; similar colour | Different retention; different UV spectrum | HPLC/UV, D2 screen | Under-potency | Declared IU/g not delivered | Assay short of the label | HPLC against a standard | Oxidised carrier | Rancid oil; peroxide high | Peroxide value above the limit; odour | Peroxide value, fatty-acid profile | Undeclared carrier | Allergen or label mismatch | Fatty-acid profile differs from the declared oil | GC fatty-acid profile, allergen review Of the signals available, colour is the easiest to fake: a pale yellow oil is easy to match with a different carrier. The stronger signals are the retention time, the ultraviolet spectrum, the IU arithmetic and the peroxide value. When appearance and potency are reported without identity, the substitution most likely to occur has gone untested. ## How to write the identity into the specification - “Cholecalciferol oil, CAS 67-97-0, C27H44O, 1.0–1.1 MIU/g by HPLC.” - “Identification by HPLC retention against a cholecalciferol standard and by UV spectrum; state the wavelength.” - “Potency in IU/g with the micrograms-per-gram equivalent; the conversion factor is 40 IU per microgram.” - “Carrier oil named; antioxidant package named; peroxide value ≤10.0 meq O₂/kg.” - “A vitamin D2 screen where the form or the source is in question.” - “Heavy metals and microbiology as listed; destination market confirmed before the order.” ## Six questions for the supplier - Which carrier oil is this lot, and is it named on the certificate? - What is the IU/g, and what is the equivalent in micrograms per gram? - Will you release the chromatogram and the UV spectrum, not just the potency number? - What is the peroxide value, and which antioxidant package is present? - Has the lot been screened for vitamin D2? - In a dispute, would you join a re-test on the retain sample? Answers to those six questions are an identity file in practice. A single potency figure is not. For the catalog figures, start at the product page. The COA page maps each certificate line; the grades page compares the forms; the oil-versus-powder page follows the carrier and label; the HPLC method note explains the separation; the quality page covers release. ### 01 Reading an ascorbyl palmitate COA: assay, melting range and moisture URL: https://nutrition.rainwoodbio.com/products/vitamins/ascorbyl-palmitate/coa/ Reviewed: 2026-11-20 Ascorbyl palmitate is released against an HPLC assay of at least 95.0%, but that figure describes the ester only when the melting range, the loss on drying and the identification sit beside it. The catalogue panel adds appearance, IR identification, melting point 107–117 °C, loss on drying ≤1.0%, heavy metals, microbiology and an 80 mesh cut. The batch certificate turns those limits into results for one lot. In one lineA ≥95.0% HPLC assay describes the ester only when the melting range, the loss on drying and the identification sit beside it on the same certificate. ## The certificate as a test report Each line needs a parameter, a method and a release limit, with the measured result in its own column. A line that says only “conforms” records a judgement and withholds the measurement. Three lines carry most of the weight: the assay says how much ester is present, the melting range says the solid is the expected one, and the loss on drying says how much of the weighed powder is water. Identification matters because the catalogue names two tests. HPLC retention shows a compound that elutes where the standard does; IR shows the ester carbonyl and the long alkyl chain that ascorbic acid does not have. Neither establishes the chain length, which is the fatty-acid question on the identity page. Release panel · catalogue specification, ascorbyl palmitate | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | HPLC retention and IR | Conforms to the reference | Assay | HPLC with UV detection | ≥95.0% | Melting range | Capillary method | 107–117 °C | Loss on drying | Gravimetric | ≤1.0% | Heavy metals | ICP-MS, each element | Pb ≤3 mg/kg; As ≤2 mg/kg; Cd ≤1 mg/kg; Hg ≤0.1 mg/kg | Microbiology | Plate count and absence checks | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; Salmonella and E. coli absent | Particle size | 80 mesh sieve test | ≥95% passing the 80 mesh sieve ## The assay basis and the method behind the number The catalogue line does not print a basis, and the certificate should. A dried-basis assay divides the measured ester by the dry matter; an as-is assay does not. With loss on drying limited to ≤1.0% the gap is at most about one point, but a lot at 95.4% dried with 0.8% water is 94.6% as-is. Write the basis into the specification and make the certificate use the same words. The method matters as much. The catalogue assay is HPLC; the NF monograph assays this ester by iodometric titration, and the JECFA specification sets the result at not less than 95% on the dried basis. Titration measures reducing power, so free ascorbic acid counts; HPLC separates the ester from ascorbic acid, palmitic acid and related substances. A 96% titration result and a 96% HPLC result are not the same claim about the same powder. If the form is disputed, ask for the chromatogram. A method that does not resolve the C16 ester from the C18 ester cannot tell palmitate from stearate, and the two have different CAS numbers and different melting points. ## Release limit versus batch result One column is the boundary; the other is the measurement. A result column filled with the specification range is a copy of the gate, not a result. What the result column should contain | Parameter | Release limit | Result column | Assay | ≥95.0%, basis stated | A measured percentage, with the standard, method and basis | Melting range | 107–117 °C | The observed start and end of the melt | Loss on drying | ≤1.0% | The measured percentage, with the drying condition | Heavy metals | Per element | One measured figure per element, in mg/kg | Microbiology | Counts plus absence | The count and the absence finding for the lot | Particle size | ≥95% through 80 mesh | The measured percentage through the sieve “Passes specification” is a conclusion, and the reader should reach it from the numbers: a count plus an absence statement for microbiology, a figure per element for heavy metals. A certificate that reports “heavy metals: conforms” has hidden which element was measured. ## What moves between batches Esterification and crystallisation move the assay, colour and melting range; the wash decides how much free ascorbic acid and palmitic acid remain. Drying moves the loss on drying, and milling moves the 80 mesh result, which can change with the mill while the chemistry stays the same. The melting range is the most informative line. The ten-degree window is normal: food-grade palmitic acid carries some stearic acid, so the solid is a C16/C18 mixture rather than one sharp compound. A low-end result is not a failure, and a very sharp melt is not evidence of purity; report the observed range. Colour is the least quantitative line. A yellow tint can be the first sign of oxidation while the assay is inside the limit. Ask for the batch record and the chromatogram before rejecting on colour alone, and watch a trend rather than one result near an edge. ## When to order an outside test An outside test earns its cost when a new source is being qualified, when the first shipment enters a regulated market, when the certificate cannot back a form claim, or when two results disagree. The panel worth paying for: HPLC against a characterised standard, IR, melting range, specific rotation, fatty-acid GC after hydrolysis, loss on drying, metals and microbiology. The rotation separates the L ester from the D form; the additive specification for E 304 (i) gives +21° to +24° at 20 °C for a 5% w/v solution in methanol. The fatty-acid profile shows the chain length: palmitate gives C16, stearate gives C18, a blend gives both. Add residual solvents if the process uses ethanol or hexane, and ask for the detection limit of every screen; “not detected” without a limit describes the method. Keep the chain of custody: the sample tested should be the sample retained, and the report should name the lot. In a dispute, ask for the discriminating tests rather than a second assay. ## What to compare between suppliers Put six lines side by side: CAS number and ester identity; assay result, method and basis; melting range; loss on drying; metals, microbiology and particle size; pack and lot code. Two quotations that agree on 95% and differ on the method or the basis are not describing the same powder. The second layer is traceability: who made the lot, which steps were used, and whether the lot code on the certificate matches the pouch and the drum. The catalogue specification sits on the ascorbyl palmitate product page. The tests that separate the ester from ascorbic acid are on the identity page; the physical forms are on the grades page; the method is in the HPLC note; the release workflow is on the quality page. ### 02 Powder, fine powder or oil dispersion: choosing an ascorbyl palmitate grade URL: https://nutrition.rainwoodbio.com/products/vitamins/ascorbyl-palmitate/grades/ Reviewed: 2026-11-20 Ascorbyl palmitate is one chemical entity, CAS 137-66-6, so its grades are physical rather than chemical: the standard 80 mesh powder, a finer cut, an oil dispersion or a diluted blend. The catalogue form is the 80 mesh powder; the others are made to order and each changes the particle line, the assay per gram or the carrier. Ascorbyl stearate is not a grade at all — it is the C18 ester, a different product with its own CAS number. In one lineThe chemistry is fixed by CAS 137-66-6; the grade question is the physical form, the particle size and whether the powder is dispersed in oil before it reaches the formula. ## Why this ester has grades at all The ester melts at 107–117 °C and does not dissolve in water. In a capsule or a tablet it has to flow and fill; in an oil blend or a softgel fill it has to dissolve without a long heat step; in a dry mix it has to stay evenly distributed. Those are three different physical jobs, and one 80 mesh powder does not do all three equally well. A second reason is the dose. A formula that uses the ester as a small antioxidant addition and a formula that uses it as the vitamin C source need very different amounts per gram of finished product. A diluted blend can help the first; the pure powder suits the second. The grade is a handling decision before it is a commercial one. ## The forms side by side Physical forms of ascorbyl palmitate and the neighbouring ester | Form | What it is | Typical use | What changes | Standard powder | ≥95% through 80 mesh | Capsules, tablets, oil blends | The catalogue form; lot code on pouch and drum | Fine powder | A finer cut, agreed on request | Faster dispersion in oil | Particle profile and flow | Oil dispersion | Ester dispersed in a carrier oil | Softgel fill, oil-based blends | Assay per gram follows the carrier | Diluted blend | Ester on a carrier, agreed on request | Low-dose antioxidant use | Carrier must be declared | Ascorbyl stearate | C18 ester, CAS 25395-66-8 | Not a substitute | Different melting point and label name The first four rows are formats of the same material. The last row is a different substance: ascorbyl stearate is E 304 (ii), C24H42O7, molecular weight 442.6, and it melts around 116 °C. A supplier who ships stearate against a palmitate order has changed the ingredient, not the grade. ## Particle size, flow and the melt The catalogue cut is ≥95% through 80 mesh. That is a finishing specification: it says how the powder passes a sieve, not how it behaves in a blender. Flow, dust and segregation depend on the particle-size distribution and on the bulk density, and a change of mill can move all three while the certificate still reads 95% through 80 mesh. The melting range matters in the plant as well as on the certificate. A formulator who melts the ester to dose it as a liquid puts the material at 107–117 °C; that is a heat load the powder would not otherwise see, and the oil phase then has to be cooled. Dissolving the ester in warm oil at the process temperature is the gentler route, but the solubility at that temperature has to be measured, not assumed. The ester is insoluble in water and soluble in fats and in organic solvents such as ethanol. That property decides the dosage form: an aqueous stick pack would carry the powder as a suspension, not a solution, and a clear drink is not a format for this material. ## Dose arithmetic by format The vitamin C equivalent is 42.5% of the ester mass: 176.12 ÷ 414.53 = 0.4249. A label that declares 100 mg of vitamin C from ascorbyl palmitate therefore needs about 235 mg of the ester, and a 500 mg dose of the ester supplies about 212 mg of vitamin C equivalent. Those figures decide the format. A 100 mg vitamin C dose needs 235 mg of ester, a fill that a two-piece capsule can meet; a 500 mg vitamin C dose needs 1,177 mg of ester, which no single capsule holds, so the dose moves to a softgel fill or to a divided serving. A tablet is possible, but the dose per tablet is small and the powder is hydrophobic, so the granulation has to wet it. When the ester is used as an antioxidant rather than as the vitamin source, the amount is a fraction of the oil or fat mass, set by the recipe and by the destination text for the additive. That is a different scale from the nutrient dose, and the two uses should not be mixed in one declaration. ## What to write into the specification - “L-Ascorbyl palmitate, CAS 137-66-6, C22H38O7, molecular weight 414.53.” - “Assay ≥95.0% by HPLC, on the dried basis; loss on drying ≤1.0%.” - “Identification by HPLC retention and IR; melting range 107–117 °C.” - “Particle size ≥95% through 80 mesh; heavy metals and microbiology as listed.” - “Physical form: powder, fine powder, oil dispersion or diluted blend, as agreed.” - “Carrier and assay per gram stated for any dispersion or blend.” We supply the standard powder. A finer cut, an oil dispersion or a diluted blend is a separate specification with its own particle line and, for the blend, its own carrier declaration. ## When another form is the wrong choice If the formula is aqueous and clear, this material is the wrong choice at any grade: it does not dissolve in water, and no particle size changes that. If the label names the ester as the vitamin C source, a diluted blend makes the label arithmetic harder, because the declared vitamin C has to be calculated from the assay per gram of the blend. If the dose needs a large amount of vitamin C in a small capsule, the 42.5% conversion is the constraint, and no grade removes it. A switch between formats needs a new specification, a stability check in the new matrix and a label review. The product hub carries the catalogue specification; the level-four comparison sets the ester against ascorbic acid; the stability page covers the heat and light load; the COA page shows how the form is reported; the methods library explains the assays; the vitamin C hub covers the acid. ### 02.1 Ascorbyl palmitate vs ascorbic acid: solubility, use and the label URL: https://nutrition.rainwoodbio.com/products/vitamins/ascorbyl-palmitate/grades/ascorbyl-palmitate-vs-ascorbic-acid/ Reviewed: 2026-11-20 Ascorbyl palmitate is the fat-soluble ester of ascorbic acid: 42.5% of its mass is ascorbic acid, it does not dissolve in water, and it dissolves in oils and fats. Ascorbic acid, CAS 50-81-7, is water-soluble and acidic. The two deliver the same vitamin but not in the same phase, and the label has to name the ester and calculate the vitamin C from the ester mass. In one lineAscorbyl palmitate is 42.5% ascorbic acid by mass and dissolves in oil rather than water, so it changes the phase, the dose arithmetic and the ingredient name on the label. ## Two materials, one vitamin Ascorbic acid and ascorbyl palmitate side by side | Property | Ascorbic acid | Ascorbyl palmitate | CAS number | 50-81-7 | 137-66-6 | Formula | C6H8O6 | C22H38O7 | Molecular weight | 176.12 | 414.53 | Vitamin C per gram | 1.000 g | 0.425 g | Solubility | Water; slightly in ethanol | Fats, oils and ethanol; not water | Melting point | About 190 °C, with decomposition | 107–117 °C | EU additive identity | E 300 | E 304 (i) | Typical role | Vitamin source, acidulant, antioxidant | Oil-soluble antioxidant, vitamin C source The table is a comparison, not a ranking: each material has its own CAS, specification and label name, and a purchase order that says “vitamin C” has specified neither. ## Water or oil The ester is practically insoluble in water and soluble in fats, oils and ethanol. In a softgel fill or an oil blend it dissolves in the oil phase; in an emulsion it partitions into the oil droplets; in a dry capsule it sits as a powder in the fill. In a clear aqueous drink it does not dissolve, and a suspension is a different product with a visible cloud and its own stability study. Ascorbic acid is the opposite: it dissolves readily in water and gives an acidic solution. That is why it suits a stick pack or a drink, and why it can attack an acid-sensitive matrix. The ester does not lower the pH of a water phase the way the acid does, because it is not in that phase at the same concentration. Solubility is not stability: the ester in oil is protected from water but exposed to oxygen, light and heat, and the acid in water is exposed to all of them. Each form has its own failure route. ## What each one is used for The ester is used for two jobs. As an antioxidant, a small amount protects an oil or fat from oxidation, and the ester is consumed in the process. As a vitamin C source, a larger amount is formulated into a softgel, an oil blend or an oil-based capsule that carries the vitamin in the fat phase. The same material serves both, but the amounts and the declarations differ. Ascorbic acid is used where water is the phase: beverages, stick packs, aqueous gels and tablets, and as an acidulant and antioxidant in its own right. It is also the reference material for the vitamin C figure, which is why the conversion factor exists. The choice is a phase decision: with no oil phase, the ester has nowhere to go; in a clear water-based drink, the acid is the form that dissolves. ## The conversion and the fill weight The conversion is the ratio of molecular weights: 176.12 ÷ 414.53 = 0.4249. One gram of the ester supplies 0.425 g of ascorbic acid equivalent, and one gram of ascorbic acid needs 2.354 g of the ester. The factor is fixed by the formula and does not move with the assay. Two worked examples. A label that declares 100 mg of vitamin C from ascorbyl palmitate needs 100 ÷ 0.4249 = 235 mg of the ester. A label that declares 500 mg of the ester delivers 212 mg of vitamin C equivalent. Neither figure is a recommendation; they are the arithmetic that keeps the label and the weigh-up in agreement. The assay basis is a second correction. A lot at 95.4% on the dried basis with 0.8% loss on drying is 94.6% as-is; the vitamin C equivalent as-is is then 94.6 × 0.4249 = 40.2%. Apply the water correction first, then the ester factor, and do not skip either step. The fill weight follows. A 100 mg vitamin C dose costs 235 mg of fill as the ester against 100 mg as the acid, so the same dose needs more than twice the mass in the capsule or softgel, and that difference can decide the dosage form. ## What the label has to say In the EU, the ester has two identities. As the additive, it is E 304 (i), and the ingredient list names the additive; as the vitamin source, the supplement list in Annex II of Directive 2002/46/EC names L-ascorbyl 6-palmitate, and the nutrition declaration gives vitamin C in mg and as a percentage of the 80 mg nutrient reference value. The role decides which declaration applies, and one product should not mix them. In the US, the Supplement Facts panel declares vitamin C in mg and as a percentage of the 90 mg Daily Value, with the source in parentheses: “Vitamin C (as ascorbyl palmitate)”. The ingredient list names the ester. A food use as an antioxidant follows the additive route instead, and 21 CFR 182.3149 is the reference to read. The declared vitamin C is 42.5% of the ester mass. A label that declares the ester mass as vitamin C overstates the vitamin by 135%; a label that declares the vitamin and leaves out the ester name hides the source. The claim is a separate review; this site makes no health claim. ## When each is the right choice Choosing between ascorbyl palmitate and ascorbic acid | Situation | Ascorbyl palmitate | Ascorbic acid | Clear aqueous drink | Insoluble; not a fit | Dissolves; fits | Oil or softgel fill | Dissolves in the oil phase | Practically insoluble in oil | Dry capsule | Fits, at 2.35× the mass per vitamin dose | Fits at a lower mass | Antioxidant in oil | The oil-soluble choice | Poorly soluble in oil | Acid-sensitive matrix | No water-phase acidity | Acidic in water | Low-mass dose | Needs more mass per vitamin dose | The smaller mass Choose the ester when the phase is oil, the antioxidant has to sit in the fat, or the label is built around a softgel or oil blend. Choose the acid when the phase is water, when the dose has to be small, or when the acidity is part of the product. If the formula has both phases, the two can be used together, each with its own declaration and limit. A switch in either direction needs a new specification, a stability study in the new matrix, a label review and a written change control. It is not a weigh-up adjustment, and it is not a unit conversion applied at the balance. The ascorbyl palmitate page carries the catalogue specification; the grades page places this comparison in the range; the vitamin C hub carries the acid; the stability page covers the oil-phase risks; the compliance page covers the two regulatory roles; the methods library explains the assays; the quality page covers release. ### 03 Ascorbyl palmitate stability: light, heat and the ester bond URL: https://nutrition.rainwoodbio.com/products/vitamins/ascorbyl-palmitate/stability/ Reviewed: 2026-11-20 Ascorbyl palmitate is a dry, crystalline ester that is stable in a sealed, dark pack and degrades by two routes: oxidation of the ascorbate ring, driven by light, heat, oxygen and metal ions, and hydrolysis of the ester bond, driven by moisture and heat. In an oil matrix the first route dominates; in an emulsion with water present, the second becomes relevant. The pack and the matrix decide the shelf life, not the certificate. In one lineThe ester is stable as a dry, dark-stored powder, but light and heat drive oxidation of the ascorbate ring and moisture drives hydrolysis of the ester bond; the pack and the matrix decide the shelf life. ## The powder: light, heat and moisture The catalogue sets loss on drying at ≤1.0%. That is a release gate, not a storage allowance. Once the pouch is open, the powder can pick up moisture from the air; the loss on drying climbs and the as-is assay falls. The ester is not strongly hygroscopic, but the limit is tight enough that an open pouch in a humid room can move it. Light is the first driver. The ascorbate ring absorbs ultraviolet light, and the powder discolours towards yellow as it oxidises. Keep the material in the original foil pouch or in an opaque container that closes properly; a clear jar on a bench is an exposure, not a storage container. Heat accelerates both routes. Ambient warehouse temperatures are acceptable for the sealed pack; a hot loading bay, a car boot or a container in the sun is not. The melting range of 107–117 °C is not the temperature to watch, because the reactions that matter start well below the melt. ## The oil phase, not water This ester does not dissolve in water, so “in solution” for this material means dissolved or dispersed in an oil or in ethanol. In an oil the ester acts as an antioxidant: it is oxidised in preference to the oil, which is why it is used in oil-based formulas. That also means it is consumed, and the amount left after storage is the analytical question, not only the peroxide value of the oil. In an emulsion the ester sits in the oil droplets, with the water phase next to it. Heat and time can hydrolyse the ester at the interface, releasing ascorbic acid and palmitic acid; the HPLC assay falls and the free ascorbic acid rises. An alkaline water phase makes the hydrolysis faster, and a metal ion carried in either phase can catalyse the oxidation. A clear aqueous drink is not a format for this material. A suspension can be made, but it is a dispersion with a visible cloud, and the stability of a suspension is a different study from the stability of a solution. ## What drives degradation Factors that move ascorbyl palmitate during storage | Factor | What it does | Control | Light | Oxidation and yellowing of the powder | Foil or opaque pack; dark store | Heat | Faster oxidation and hydrolysis | Controlled store; cool process | Moisture | Hydrolysis of the ester; higher loss on drying | Sealed pack; desiccant where needed | Oxygen | Oxidation in oil and at exposed surfaces | Low headspace; sealed pack | Metal ions | Catalyse oxidation; colour shift | Avoid iron and copper contact | Alkaline water phase | Faster hydrolysis in emulsions | Control the emulsion pH The factors are not independent. Warm, humid and bright is worse than the sum of three separate effects, and an emulsion combines the oil, the water and the oxygen in one system. The useful question is not “is ascorbyl palmitate stable?” but “stable in which pack, in which matrix, for how long?” ## A stability protocol for the ingredient A protocol worth accepting names the pack, the condition, the time points and the tests. Warehouse conditions are 25 °C/60% relative humidity for the long-term arm and 30 °C/65% for the intermediate arm; 40 °C/75% stresses the pack, and a light-exposure arm covers the failure mode a dark incubator misses. Test assay, loss on drying, melting range, appearance, free ascorbic acid and microbiology at each point. In an oil matrix add peroxide value and, where the ester is the antioxidant, the residual ester figure. In an emulsion add the pH and the free ascorbic acid, because those are the two numbers that move when the ester hydrolyses. The report should give the individual results and name the pack and the lot family. Ask for the summary for the pack you will buy. A 1 kg pouch and a 25 kg drum have different headspace and different opening histories; the data belongs to the pack. ## The finished formula changes the answer A softgel fill starts as an oil solution, so the heat used to dissolve the ester is the first process risk; the fill is then enclosed and protected from light by the shell, which helps. A two-piece capsule is a dry fill, but the shell can pass moisture into the powder, so the loss on drying is checked at release and again after storage. A tablet needs a granulation that wets a hydrophobic powder, and the drying step is another heat load. An emulsion combines all the risks: heat, water at the interface, oxygen in the headspace and, often, a metal trace from the equipment. Whether an overage is warranted belongs to the label and the stability data; no overage makes up for a pack that admits moisture. ## How the shelf life is set Ascorbyl palmitate does not have one catalogue shelf life: the ester's fate depends on the pack, the carrier and the finished matrix. The retest period therefore belongs to a specific pack and is backed by that pack's stability file. Without the pack, the storage condition and the test panel, a shelf-life figure is marketing, not a specification. After the retest period, re-assay the retained sample before extending use, and do not carry a bulk figure across to a repacked container. The product page lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the compliance page covers the destination file; the HPLC note describes the assay; the quality page describes the release workflow. ### 04 Ascorbyl palmitate MOQ: packs, lead time and the quotation URL: https://nutrition.rainwoodbio.com/products/vitamins/ascorbyl-palmitate/moq/ Reviewed: 2026-11-20 The order minimum for ascorbyl palmitate is 1 kg, and the 1 kg foil pouch is the unit that carries it; the bulk unit is a 25 kg fiber drum. Standard powder is quoted at 1–7 days from confirmation. Six details make a quotation firm: the ester and CAS number, the assay basis and physical form, the quantity and pack, the destination and Incoterm, the document set, and the intended use and market. In one lineThe minimum is 1 kg because a smaller quantity would be split from a bulk lot and lose the pack, the lot code and the retained sample that make a trial repeatable. ## Why the floor is 1 kg A kilogram is enough for a bench trial, a retained sample and an outside identity check, and it moves as a parcel without a pallet. More importantly, it is a released pack with its own lot code: material used in the trial can be traced to the same release as material used in production. Anything smaller is usually split out of a bulk lot, repacked and given a fresh handling record. The chemistry is unchanged, but the pack identity is not, and a trial that cannot be tied to a released lot is difficult to defend. The drum lowers handling per kilogram at the cost of more inventory held. The floor is set by the pack, not by a volume target. ## Packs and formats What ascorbyl palmitate is packed in, and the formats made to order | Pack or format | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trials and small batches | Barrier to light and moisture; close it after opening | Fiber drum | 25 kg | Full production | Liner inside; lot code on drum and liner | Oil dispersion | Agreed | Softgel fills, oil blends | Carrier and assay per gram declared | Fine powder | Agreed | Quicker wetting in oil | Particle distribution changes | Diluted blend | Agreed | Low-dose antioxidant work | Carrier named in the specification The catalogue material is an 80 mesh powder, with at least 95% passing the sieve. A finer cut, a dispersion or a blend is a new specification rather than a packing option, because each moves the particle result or the assay per gram. Tell us which one the formula needs before the quotation, since the choice can change the schedule. ## Scheduling and handover Standard powder is scheduled at 1–7 days after the order is confirmed. The window covers picking, paperwork and handover to the carrier; transit, customs and the buyer's own release sit outside it. A made-to-order dispersion or blend needs longer, and the offer should say so. Get the dispatch date in writing, not just the window. A pouch usually moves as a parcel and a drum on a pallet; the Incoterm settles who books freight and who clears entry. Lot documents should travel with the consignment, not arrive after it. ## Six details a quotation needs - Product and form. The ester, CAS 137-66-6, and whether the pack is powder, dispersion or blend. - Specification. Assay basis, loss on drying, melting range, particle cut, metals and microbiology. - Quantity and pack. Pouch, drum, or a format made to order. - Destination and Incoterm. Country, delivery point and trade term. - Documents. COA, specification, TDS, SDS and any statement the importer needs. - Use and market. Additive or vitamin source, and where the finished product will be sold. Without the use and the market, a quotation cannot be checked against the destination file. The commercial terms belong on the offer, not on this page. ## A sample has to be traceable The 1 kg pouch is the pack you qualify on. Check identity, assay, moisture, melting range and microbiology before scaling up, and hold back material from that same pouch. The lot code should be the same on the sample, the certificate and the offer. A sample with no lot behind it says nothing about production. If a bench trial needs less than a kilogram, it is a split from a bulk lot with its own handling record, not the catalogue pouch. Put the split in writing and file its lot code with the trial results. ## What to settle before the first order The offer should carry the commercial and quality terms together: Incoterm, pack, dispatch window, specification revision, a certificate per lot, the retained sample, the retest period and the change route. A quality agreement signed before the first production order is easier than the same discussion after a dispute. When a lot fails the agreed specification, the evidence is the retained sample and a joint re-test by the named method, not a photograph of the drum. Name the referee laboratory and the party that pays for it in the agreement. A return argued from appearance alone is difficult to sustain for either party. The product page holds the catalogue specification. Release tests are on the COA page, the destination file on the compliance page and the retest period on the stability page. The glossary entry defines MOQ, and the logistics page covers freight and documents. ### 05 The regulatory file for ascorbyl palmitate URL: https://nutrition.rainwoodbio.com/products/vitamins/ascorbyl-palmitate/compliance/ Reviewed: 2026-11-20 Ascorbyl palmitate reaches a market through two different doors, and the door decides the paperwork. It is used as a fat-soluble antioxidant additive, where the EU additive entry is E 304 (i), and as a vitamin C source, where the EU supplement list names L-ascorbyl 6-palmitate. The same powder can be either, but not at the same time on the same label. The buyer's regulatory team confirms which route and which market apply. In one lineThe file has to show which role the ester plays — additive antioxidant or vitamin C source — because the role decides the entry, the label and the documents for the destination. ## The four checks The first check is the role and the identity: the additive entry, the vitamin form list, or both. The second is the limit: the additive specification, the contaminant limits on the finished product, and the daily dose. The third is the label: the ingredient name, the additive number where required, and the vitamin declaration if the ester is the source. The fourth is the claim, which is authorised separately from the ingredient. The file holds the specification version, the lot certificate, the destination route, the label review and the change record. The TDS states the specification and the SDS covers handling; neither settles the route. ## European Union For the additive role, the framework is Regulation (EC) No 1333/2008 on food additives, with the specifications for E 304 (i) in Commission Regulation (EU) No 231/2012. As of this review, the additive specification sets a melting range of 107–117 °C, a specific rotation of +21° to +24° at 20 °C for a 5% w/v solution in methanol, and a loss on drying of not more than 2.0%. The catalogue here sets loss on drying at ≤1.0%, so the tighter gate is a commercial choice, not the legal one. Whether a particular use and level are covered is for the buyer's regulatory team, against the current consolidated text. For the vitamin role, the list to read is Annex II of Directive 2002/46/EC on food supplements, which names L-ascorbyl 6-palmitate among the vitamin C forms. The label then declares vitamin C in the nutrition declaration with the percentage of the nutrient reference value, which is 80 mg for vitamin C. The ingredient list still names the form used. An additive declaration names the additive; a nutrient declaration names the vitamin and the form. A product that uses the ester at a technological level should not borrow the nutrient declaration, and a product that uses it as the vitamin source should not describe it only as an additive. ## United States For the food use, 21 CFR 182.3149 lists ascorbyl palmitate as generally recognized as safe when used in accordance with good manufacturing practice. For the supplement use, the ester is declared as a dietary ingredient: the Supplement Facts panel gives vitamin C in milligrams and as a percentage of the Daily Value, which is 90 mg for adults and children four years and older, with the source in parentheses, “Vitamin C (as ascorbyl palmitate)”. The two routes carry different obligations. A food additive use is governed by the additive provision; a dietary supplement is made under the cGMP rule, 21 CFR 111, and its labelling rules. Whether a particular ester source needs a premarket notification is the buyer's regulatory team's question; the supplier's file supports it with the specification, the certificate and the process description. ## United Kingdom The UK is not one file. Great Britain keeps its own lists for food additives and for the vitamins and minerals used in food supplements, and they resemble the EU lists without being the same instrument; Northern Ireland follows the EU framework. The delivery address decides which applies, and the buyer's regulatory team records the decision with the order. ## Contaminants and limits Heavy metals are judged on the finished product, so a drum result is only an input. Start from the table below, then apply the destination's current text and the daily dose, which set the final limit. The additive specification's own metal lines are a separate measurement, taken on the material rather than the dose. Contaminant limits to confirm for the finished product | Element | Reference level in the supplement | Evidence to hold | Lead (Pb) | 3.0 mg/kg in the supplement | Measured value, method, limit and the dose-adjusted calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | Measured value plus any category exception | Mercury (Hg) | 0.10 mg/kg in the supplement | Measured value and the method used | Arsenic (As) | Customer or market limit | Agreed limit and method, both printed on the certificate The catalogue limits on the powder are Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg. Those are material limits; the product limit applies after dilution and division into doses, and the two have to be checked together, especially when the ester is a small fraction of the formula. ## Labels and claims The role decides what may be said. A vitamin C claim is tied to the vitamin C content of the daily portion, not to the presence of the ester; the “source of” threshold is a share of the nutrient reference value, and an additive level is normally far below it. In the EU, health claims are authorised separately and only under their conditions; in the US, a structure/function statement is the brand's responsibility and carries the DSHEA disclaimer. No disease claim is available in either market. This site publishes the specification and the framework and makes no health claim. The claim, if any, belongs to the brand and to the market that authorises it. ## Documents for the file - Batch COA with assay, identification, melting range, loss on drying, metals and microbiology. - Specification and TDS naming the ester, the CAS number and the assay basis. - SDS in the 16-section format. - Allergen, GMO, origin and residual-solvent statements. - The source of the palmitic acid, where a palm-free or a source claim matters. - Statement of the route relied on for the intended market, prepared with the buyer's regulatory team. The palmitic acid source is not an allergen question, but it is a source question: if the chain is palm-derived, the file should say so, and a palm-free claim then needs its own evidence. Add a third-party certificate where required. ## Checklist before the first order - The ester, CAS number and assay basis are named on the specification. - The role — additive or vitamin source — is written down with the destination. - The additive entry or the vitamin form list has been checked against the current text. - The contaminant results are converted to the finished-product dose. - The label matches the role, the form and the market. - The documents and the change record are on file before the first shipment. The market notes in the technical library expand the framework: EU, US and UK. The definitions of NRV and Daily Value are in the glossary; the batch file is described on the quality page; the product is on the ascorbyl palmitate page; the ester's analytical identity is on the identity page; the acid is on the vitamin C hub. ### 06 How to prove a lot is ascorbyl palmitate, not another ester URL: https://nutrition.rainwoodbio.com/products/vitamins/ascorbyl-palmitate/identity/ Reviewed: 2026-11-20 Ascorbyl palmitate is confirmed by four measurements that agree: an HPLC peak with the retention of the standard, an infrared spectrum with the ester carbonyl and the long alkyl chain, a melting range of 107–117 °C, and a specific rotation of +21° to +24° at 20 °C in methanol. A fifth check, hydrolysis followed by gas chromatography of the fatty acids, shows that the chain is C16 and not C18. The assay alone cannot separate this ester from ascorbic acid, from ascorbyl stearate or from a dilution. In one lineIdentity rests on four agreeing measurements: the ester peak on HPLC, the ester carbonyl on IR, the melting range and the optical rotation, with the fatty-acid ratio closing the mass balance. ## The identity layers The four measurements sit in the middle of a longer file. The first layer is the document, the last is the mass balance, and each one answers a different question. A supplier who answers only the document has described the paperwork, not the powder. Layers of ascorbyl palmitate identity | Layer | Question | Test | What it proves | Document | Is the ester named? | Name, CAS 137-66-6, formula | Paperwork only | Chromatography | Is the ester present? | HPLC retention against a standard | The molecule, not the chain length | Spectroscopy | Is it an ester? | IR: ester carbonyl and alkyl chain | The functional groups | Solid and rotation | Is it the L-palmitate? | Melting range and specific rotation | The solid form and the enantiomer | Hydrolysis | Is the chain C16? | GC of the fatty acids after hydrolysis | The chain length and the C16/C18 ratio | Mass balance | Is it diluted? | Assay, loss on drying, ash, impurities | Consistency of the numbers No single layer covers the others. The rotation does not show the chain length, the fatty-acid profile does not show the enantiomer, and the assay shows neither. Identity is the agreement between them. ## The ester ratio and the fatty-acid profile The ester is a 1:1 product of ascorbic acid and palmitic acid. Ascorbic acid is 176.12 and palmitic acid 256.43; the ester loses one molecule of water in the reaction and weighs 414.53. The ascorbic acid share is 176.12 ÷ 414.53 = 42.5%, and the palmitic acid share is 256.43 ÷ 414.53 = 61.9%. The two shares add to more than 100% because hydrolysis puts the elements of water back: 42.5 + 61.9 = 104.4%. The ratio is the check a dilution cannot fake. A powder that is part ester and part carrier can be given an assay that looks plausible only if the carrier is counted; an honest assay falls, and the mass balance shows the gap. Hydrolysis followed by GC shows the fatty-acid profile directly: C16:0 for palmitate, C18:0 for stearate, and both when the starting palmitic acid carried stearic acid, which food-grade palmitic acid normally does. That is why the melting range is a window. A commercial ester with a small C18 fraction melts across a range rather than at a point, and the additive specification allows a 107–117 °C window wide enough to cover that mixture. A sharp melt at one temperature is not evidence of a purer material; it may be evidence of a different fatty-acid profile. ## X-ray diffraction and the solid state X-ray diffraction answers the solid-state question: is the powder crystalline, and does its pattern match the reference? It separates a crystalline ester from an amorphous carrier blend, and it compares two sources on the same footing. It is not a purity assay, and it does not measure the chain length or the fatty-acid ratio. The melting range is the cheaper solid-state check and belongs on every certificate. A sample that melts below the window is not the expected solid, whatever the assay says. Ask for the reference pattern and the detection limit before accepting a “match” statement, and use XRD as the confirmation for a disputed lot rather than a routine release test. ## What adulteration looks like Common substitutions and the signals that separate them | Adulterant | What it does | Signal | Test | Free ascorbic acid | Adds a reducing substance; lowers the ester share | Iodometric titre high, HPLC ester low | HPLC and titration side by side | Ascorbyl stearate | C18 ester sold as palmitate | Melting near 116 °C; C18 in the profile | GC after hydrolysis, melting range | Carrier dilution | Lowers the assay; changes ash or moisture | Assay low; mass-balance gap | Assay, loss on drying, ash | Oxidised material | Yellow to brown colour; lower ester | Colour shift with a falling assay | Appearance, HPLC, peroxide value in oil | Moisture | Higher loss on drying; lower as-is assay | Loss on drying high; dried assay normal | Loss on drying Colour is the weakest signal: white to off-white covers a wide range, and a yellow tint can be oxidation or a process variant. The stronger signals are the fatty-acid profile, the specific rotation and the mass balance. A certificate that reports appearance and assay but no rotation and no chain-length check has left the closest substitution untested. ## How to write the identity into the specification - “L-Ascorbyl palmitate, CAS 137-66-6, C22H38O7, molecular weight 414.53.” - “Assay ≥95.0% by HPLC, on the dried basis; loss on drying ≤1.0%.” - “Identification by HPLC retention and IR; melting range 107–117 °C.” - “Specific rotation +21° to +24° at 20 °C, 5% w/v in methanol.” - “Fatty-acid profile by GC after hydrolysis: C16:0 as the principal acid; C18:0 reported.” - “Free ascorbic acid and free palmitic acid limits, agreed with the supplier.” - “Particle size ≥95% through 80 mesh; heavy metals and microbiology as listed.” ## Five questions for the supplier - Which ester is this lot — palmitate, stearate or a mixture — and which CAS number is on the certificate? - Can you provide the HPLC chromatogram, the IR spectrum and the observed melting range? - What is the specific rotation, and in which solvent and concentration was it measured? - What does the fatty-acid profile show after hydrolysis, and what is the C16/C18 ratio? - If a result is contested, will the supplier re-test the retained sample jointly? Those five answers, taken as a set, are the identity file; one assay percentage is not. The product page carries the catalogue specification; the COA page shows where each figure sits on the certificate; the grades page compares the physical forms; the level-four comparison covers the acid; the HPLC note explains the separation; the FTIR note covers the infrared check. ### 01 Calcium ascorbate COA: assay, calcium and the release basis URL: https://nutrition.rainwoodbio.com/products/vitamins/calcium-ascorbate/coa/ Reviewed: 2026-11-20 A calcium ascorbate certificate reports the titration assay, calcium, pH, loss on drying, IR identity, metals, microbiology and mesh. Two of those lines describe the salt: the assay measures the ascorbate, and calcium measures the counter-ion. A certificate that carries only the first has described a reducing powder, not necessarily this product. The ranges in the panel are release gates; the batch COA is the record for the lot in the pack. In one lineThe certificate has to show two numbers that agree: the ascorbate assay by titration and the calcium figure that proves the salt, both tied to a stated basis. ## The release panel The table below reproduces the catalogue limits, not a batch result. Every line needs a method and a boundary before a lot can be judged against it. Calcium ascorbate release tests and limits | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | IR and titration | Conforms to the reference | Assay (as calcium ascorbate) | Iodometric titration | 99.0–101.0% | Calcium | Complexometric titration | 9.0–10.0% | pH (10% solution) | pH meter | 6.0–7.5 | Loss on drying | Gravimetric | ≤2.0% | Heavy metals (Pb, As, Cd, Hg) | ICP-MS, one result per element | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology (APC, yeast/mould, pathogens) | Plate count; absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size (80 mesh) | Sieve analysis | ≥95% through 80 mesh Identification tells the reader whether the solid is the ascorbate salt; assay and calcium tell them how much is there. A line that says only “conforms” gives a verdict and withholds the measurement. ## Assay basis, titration and the calcium figure Iodine is the titrant. It oxidises the ascorbate ion, the volume of standard is converted to calcium ascorbate, and the percentage is calculated against a stated basis. Only reduced ascorbate consumes iodine, so dehydroascorbic acid is invisible to the method. The certificate should print the basis beside the percentage: 99.0% dried and 99.0% as-is are different claims about the powder. Once the basis is known, the arithmetic is direct. A lot at 98.5% as-is with 1.5% loss on drying gives 98.5 ÷ 0.985 = 100.0% on the dried basis. The catalogue writes the formula as the dihydrate, C12H14CaO12·2H2O, and limits loss on drying to 2.0%. Water of crystallisation is part of the formula; the loss on drying is what the test drives off. The certificate should say which water the basis handles. Calcium comes from a complexometric titration with disodium edetate. Magnesium is precipitated as hydroxide at alkaline pH, so it does not consume titrant, and calcium is titrated to an indicator endpoint. That measures calcium quantity, not the calcium–ascorbate pair. When the salt form is disputed, ICP-OES is the element-specific check. HPLC is not a release test in the catalogue, but it answers a question the titration cannot. It separates ascorbic acid from dehydroascorbic acid and quantifies the oxidised fraction; ask for it when the colour has moved or when the reduced assay and the appearance disagree. ## Release limit versus batch result The limit sets the boundary for acceptance, and the result is the figure the laboratory obtained from that lot. They should sit in different columns, with the method named alongside. If the result column simply repeats the specification range, the certificate has restated the gate instead of reporting a measurement. What the result column should contain | Parameter | Release limit | Result column | Assay | 99.0–101.0% | A measured percentage, with the titre, standard and basis | Calcium | 9.0–10.0% | A measured percentage and the method, ideally with ICP-OES | pH | 6.0–7.5 at 10% | The measured pH, with concentration and temperature | Loss on drying | ≤2.0% | A measured percentage | Metals and microbiology | Per element; count plus absence | One figure per element; a count and the absence finding | Particle size | ≥95% through 80 mesh | The measured percentage through the sieve A reader should be able to reach “passes specification” from the figures themselves. The calcium line deserves a second look: near 9.0% with a high assay it may indicate a partly dried or blended lot, and near 10.0% with a low assay it may indicate an added calcium salt. ## What moves between batches The neutralisation, crystallisation and drying steps shift both pH and the water figure. Calcium follows the form and the drying history, while the assay follows the ascorbate content and the basis. Milling and sieving change the mesh result without touching the chemistry, so a new sieve can move that line while everything else holds. Appearance is the softest test on the panel. The window runs from white to off-white, and a cream or yellow cast can appear before the titration leaves its range. A darker lot calls for the HPLC result and the water figure before a rejection is decided. A drift across several lots is more informative than one result close to a limit. If the assay falls while calcium holds, dilution or oxidation is more likely; if calcium falls while the assay holds, free acid or a blend is more likely; a falling pH suggests residual acid, and a rising water figure points to the pack or the store. The same lot code should appear on pouch, drum and retained sample. ## When to order an outside test An outside test is worth ordering when the source is new, the shipment is the first into a regulated market, the salt claim is not supported by the supplier's certificate, or a result is contested. Go beyond a copy of the release sheet: IR for the ascorbate, rotation for the L-isomer, calcium by ICP-OES, HPLC for the ascorbic and dehydroascorbic fractions, water, pH, metals and microbiology. X-ray diffraction is worth adding when solid form matters, and an ash or chloride check when a different calcium salt is suspected. Each screen should come with its detection limit; “not detected” without that limit describes the method, not the sample. Keep the chain of custody intact. Test the retained material, identify the lot on the report, and when a result is contested give the referee the sample, the certificate and the specification. Ask for the tests that separate the salt from the acid and from a calcium filler, not another run of the same titration. ## What to compare between suppliers Compare six items: form and CAS number; assay and basis; calcium and method; pH and water; metals, microbiology and mesh; pack and lot code. If two quotations match on 99.5% but disagree on calcium or on the basis, they are probably not describing the same material. Traceability is the next layer: the manufacturer, the neutralisation and drying steps, and whether the lot code is consistent across pouch, drum and certificate. The product page lists the catalogue limits. The identity page sets out the tests that separate the salt from the acid; the grades page covers the particle options; the compliance page covers the market framework; the complexometric method note explains the calcium titration; the quality page covers release. ### 02 Calcium ascorbate grades: hydrate form, mesh and flow URL: https://nutrition.rainwoodbio.com/products/vitamins/calcium-ascorbate/grades/ Reviewed: 2026-11-20 Calcium ascorbate is graded on two axes: the hydrate form and the particle specification. The catalogue form is the dihydrate as an 80-mesh powder, with granulation available on request; an anhydrous grade is a separate specification rather than a drop-in. Moving between these grades changes flow, fill weight and the water figure on the certificate, not the identity of the salt. In one lineA calcium ascorbate grade is the hydrate form plus a particle specification; switching mesh or granulation changes flow and fill, not the chemistry on the label. ## Why the grade question comes before the order A capsule line and a stick-pack line ask different things of the same salt. The capsule needs a powder that flows into a dosator and compacts without sticking; the stick pack needs a powder that dissolves quickly and does not segregate in the blend. Both can be calcium ascorbate and both can meet 99.0–101.0% by titration, yet the two deliveries are not interchangeable on the line. The hydrate form is the second axis. The catalogue formula is the dihydrate, C12H14CaO12·2H2O. An anhydrous salt carries more calcium and more ascorbic acid per gram, so a form switch moves the label arithmetic even when the assay percentage stays the same. A “buffered vitamin C” product is a third thing again: it is a blend of ascorbates, sometimes with ascorbic acid, and its calcium figure depends on the blend ratio rather than on a grade of this salt. ## The grades side by side Calcium ascorbate grades and what changes | Grade | Form and mesh | Calcium | Vitamin C equivalent | Typical use | Standard powder | Dihydrate, ≥95% through 80 mesh | 9.0–10.0% | About 82.6% | Capsules, tablets, dry blends, sticks | Granulated | Dihydrate, agglomerated, coarser | 9.0–10.0% | About 82.6% | Flow and dust control; direct compression | Anhydrous (separate purchase) | Separate specification; finer | About 10.3% theoretical | About 90.2% | Only where the water load must be lower | Buffered blend | Mixture, not a grade of this salt | Depends on the ratio | Depends on the ratio | A formula decision, with its own label The vitamin C equivalent is the mass of ascorbic acid the salt supplies: two ascorbate ions per calcium ion, 352.25 g of ascorbic acid per 426.34 g of dihydrate, or 82.6%. The same calculation on the anhydrous salt gives 90.2%. The calcium figures follow the same logic: 40.08 ÷ 426.34 = 9.40% for the dihydrate and 40.08 ÷ 390.31 = 10.27% for the anhydrous form. Rainwood supplies the dihydrate; an anhydrous lot would be a separate purchase with its own specification. ## Mesh, flow and the line Eighty mesh is the finishing cut: at least 95% of the powder passes the sieve. That figure describes the upper end of the particle-size distribution, not the shape of the particles or their flow. Two lots can both pass 80 mesh and behave differently in a hopper, because flow depends on fines, agglomeration and moisture as well as on the sieve cut. Granulation builds larger, more uniform particles from the fine powder. The assay and the calcium figure do not change; the bulk density, the flow and the dust do. That is why granulation is requested for direct compression, for a blend that must not segregate, and for a plant that cannot control dust from a fine powder. It is a different particle specification and should be written as one. Dust is also a hygiene question. A fine ascorbate powder disperses easily, and a granulated grade keeps more of the material in the container. Neither grade is “better”; each is a match to the handling system. Ask for the particle-size report and a flow result, not only the mesh line. ## Dose arithmetic and the fill The label conversion starts from the vitamin C figure. One gram of the dihydrate supplies 0.826 g of ascorbic acid equivalent and 0.094 g of calcium. A 500 mg vitamin C dose therefore needs 500 ÷ 0.826 = 605 mg of the salt; the same dose carries 56.9 mg of calcium. A 1,000 mg vitamin C dose needs 1,210 mg of the salt and carries 113.8 mg of calcium. The reverse direction is the common label error. A label that declares 500 mg of calcium ascorbate delivers 413 mg of vitamin C and 47 mg of calcium. Treating the salt mass as vitamin C inflates the vitamin figure by roughly a fifth. A label that gives the vitamin but omits calcium leaves out a nutrient the customer may count. Fill weight follows the arithmetic. A capsule that holds 600 mg of a dense powder may not hold 605 mg of a lighter granulation, and a stick pack sized on 500 mg of ascorbic acid needs 605 mg of the salt before any overage. Tablets add a compression question: the dihydrate is soft and hygroscopic enough to need a careful granulation and lubricant choice, and a direct-compression grade may need a coarser particle to run at speed. ## What to write into the specification - “Calcium ascorbate dihydrate, CAS 5743-27-1, C12H14CaO12·2H2O.” - “Assay 99.0–101.0% by iodometric titration; state the basis on the certificate.” - “Calcium 9.0–10.0% by complexometric titration; ICP-OES where the form is to be confirmed.” - “pH 6.0–7.5 at 10%; loss on drying ≤2.0%.” - “Particle size ≥95% through 80 mesh, or the agreed granulation with its own particle-size report.” - “Heavy metals and microbiology as listed; pack and retest period named.” Write the hydrate form into the specification even when the catalogue default is understood. A purchase order that says only “calcium ascorbate” leaves the form, the mesh and the calcium figure open, and the supplier may fill the gap with a material that meets the assay but not the line. ## When this salt is the wrong grade If the formula needs a sharp acid taste, the calcium salt will mute it, and ascorbic acid is the simpler choice. If the label cannot carry the added calcium, or the dose already supplies enough, the salt adds a nutrient the formulator did not plan for. If the application is a clear acidic beverage, the neutral salt changes the pH and may need another acid to rebuild the profile. If the requirement is a finer powder than the standard mesh, do not assume the 80-mesh grade can be milled at the customer's site without a new particle-size specification; milling changes flow, dust and sometimes the loss on drying. If the requirement is a granulation, order it as a grade rather than as a packing note. The product hub carries the catalogue specification; the level-four comparison covers pH, calcium and the label; the vitamin C hub covers the acid; the sodium salt page covers the alternative counter-ion; the methods library explains the assays; the quality page covers release. ### 03 Calcium ascorbate stability: moisture, neutral pH and the pack URL: https://nutrition.rainwoodbio.com/products/vitamins/calcium-ascorbate/stability/ Reviewed: 2026-11-20 Sealed and dry, calcium ascorbate holds its assay for a long time; dissolved in water, it is one of the less durable vitamin C forms. Moisture, neutral pH, oxygen, light, heat and trace iron or copper all drive the ascorbate toward dehydroascorbic acid, and calcium adds interactions with phosphate, citrate and gelling agents. The pack and the finished matrix decide how long the material lasts, not the certificate. In one lineSealed and dry, the dihydrate holds its assay; dissolved at neutral pH, it oxidises faster than the acid and needs the pack and the matrix to slow it down. ## The powder: water, caking and colour The catalogue allows no more than 2.0% loss on drying. The figure is a release gate, not an allowance for storage. Once the pouch is open, the powder takes water from the air, cakes, and reports a lower assay as-is while the dried-basis figure may still sit inside 99.0–101.0%. Reading the water result beside the assay is what shows the change. The formula is written as the dihydrate, so water is also part of the crystal. The loss on drying measures what the test removes; the crystallisation water is a separate pool. A certificate that gives a dried-basis assay without saying how the basis handles that water leaves the comparison to the reader, so ask before placing two suppliers side by side. Light and heat bring the colour forward. The release window runs from white to off-white, and a cream or yellow cast can appear before the titration moves outside its range. Keep the powder in the foil pouch or another opaque container that closes tightly, and let a cold pack reach room temperature before opening so that condensation does not form on the solid. ## The solution: neutral pH and a calcium load A 10% solution reads pH 6.0–7.5. At that pH the monoanion dominates, and oxidation to dehydroascorbic acid is faster than in the acid at pH 2.1–2.6. Neutrality makes the salt gentle on an acid-sensitive matrix and shortens its life in water at the same time. Oxygen, light and heat act together, and iron or copper catalyses the reaction at parts-per-million levels. A ready-to-drink line adds heat through pasteurisation or hot fill; a stick pack leaves the water to the consumer and avoids that step. Where a liquid is unavoidable, deaerate it, shade it, control pH and metal contact, and validate the hold time before filling. Calcium adds behaviour that a sodium salt does not show. Phosphate buffers can precipitate calcium phosphate, citrate binds calcium and changes the effective concentration, and alginate, pectin or some proteins gel or cloud when calcium is present. Concentration and pH decide the outcome, so the question belongs to a matrix trial rather than to the bulk powder data. ## What moves the material Storage factors for calcium ascorbate | Factor | Effect | Control | Water | Raises the water figure, lowers the as-is assay, causes caking | Sealed pouch; dry store; desiccant if needed | Oxygen | Converts ascorbate to dehydroascorbic acid and beyond | Low headspace; deaeration; nitrogen where specified | Light | Moves colour and assay | Foil or opaque pack; dark store | Heat | Speeds oxidation and water pickup | Cool process; controlled store | Iron and copper | Catalyse oxidation at trace levels | Avoid contact; chelate; hold the metal limits | pH | Neutral solution oxidises faster than acid solution | Validate matrix pH; shorten the hold | Calcium partners | Phosphate, citrate, alginate and protein interactions | Trial in the matrix; check clarity and gel These effects reinforce one another. A warm, bright, damp store is worse than three separate problems, and a neutral solution in clear glass combines several at once. The question is not whether the salt is stable in general, but how long it holds in a named pack and condition. ## Designing the stability study The study names the pack, the storage condition, the time points and the tests. Warehouse conditions are covered by 25 °C/60% and 30 °C/65% relative humidity; the 40 °C/75% relative humidity arm stresses the pack. A light-exposure arm reveals what a dark incubator misses. At each point, test assay by titration, HPLC for the ascorbic and dehydroascorbic fractions, pH, water, appearance, calcium and microbiology. The titration sees only the reduced fraction, so a lot can pass 99.0–101.0% while carrying oxidised vitamin that iodine does not measure. HPLC separates the two, and the calcium result shows whether the salt itself has moved. Every result should appear in the report, not a bare pass statement, together with the pack and the lot family. The pouch and the drum differ in headspace and opening history, so the data must match the pack that ships. ## The matrix decides the rest A capsule or tablet begins dry, yet its shell and excipients can still pass moisture into the fill. Check water, appearance and calcium at release and again after storage. The salt is soft and can take water during compression, so a granulated grade and a dry lubricant are practical choices. A stick pack fails at the seal; one pinhole in the foil is enough, so the strip is checked alongside the powder. A beverage brings neutral pH, oxygen, heat, light and the calcium interactions together, and clarity becomes part of the trial. A gummy or chew raises water-activity and colour questions that bulk powder data cannot answer. The calcium load belongs in the formula review. A 605 mg salt dose brings about 57 mg of calcium, welcome in some products and a label problem in others. That is a formulation and labelling decision, separate from the stability result. ## How the shelf life is set No single shelf-life figure fits calcium ascorbate; the pack and the storage condition set it. A retest period belongs on the specification and must be supported by data from the same pack. A shelf-life figure without a pack, a condition and a test panel is only a claim. At the end of the retest period, re-assay the retained sample before extending use. An extension is never assumed, and a bulk figure is not carried into a repacked container. The product page lists the standard packs; the COA page lists the release tests; the MOQ page covers pack sizes and lead time; the HPLC method note explains the separation; the quality page describes release. ### 04 Calcium ascorbate MOQ: 1 kg pouch, 25 kg drum and lead time URL: https://nutrition.rainwoodbio.com/products/vitamins/calcium-ascorbate/moq/ Reviewed: 2026-11-20 Calcium ascorbate starts at 1 kg in a foil pouch, with a 25 kg fiber drum as the bulk pack; the standard pack is quoted at 1–7 days. A quotation that can be compared identifies the hydrate form, the assay basis, the calcium figure, the mesh or granulation, the quantity and pack, the destination and Incoterm, and the market documents. Those details decide which powder is being offered, not only how much of it. In one lineThe 1 kg pouch is the qualification unit and the 25 kg drum is the production unit; the minimum follows the pack, not a volume incentive. ## Why the entry pack is 1 kg One kilogram is enough to run a bench trial, hold a retained sample and send a portion to an outside laboratory. The pouch ships as a parcel, which helps when a formulator needs material before the production plan is settled. Every pouch carries a lot code and a certificate, so the powder on the bench can be traced to the lot that was released. Requests below a kilogram are normally drawn from a larger lot and repacked. Handling rises, the original pack identity is lost and traceability weakens, while the chemistry is unchanged. The 25 kg drum is the bulk unit: handling per kilogram falls, but inventory and storage time rise. The entry pack is a traceability decision rather than a volume target. ## Packs and formats Calcium ascorbate packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture and light barrier; close it after opening | Fiber drum | 25 kg | Production | Inner liner; the same lot code on drum and liner | Granulated powder | On request | Flow and dust control | A new particle specification, not a packing note | Blend or dilution | On request | A lower assay per gram | Carrier, calcium and label all change The catalogue grade is an 80-mesh powder: at least 95% passes the sieve. Granulation is a different particle specification and is quoted as one. A blend with another ascorbate or a carrier is a different product again: its assay, calcium figure and label move, and it needs its own specification and lot file. ## Dispatch and transit The standard pack is quoted at 1–7 days from confirmation of the order. That window covers picking, documents and dispatch, not transit, customs or the customer's release. Granulation, blending or a non-standard pack adds time, quoted separately. Request the dispatch date itself, not only the range. The pouch usually ships as a parcel; the drum goes on a pallet. The Incoterm assigns freight booking and entry clearance, and the COA, specification and safety data sheet should travel with the pack rather than follow it. ## Six details a quotation should carry - Material and hydrate form. Calcium ascorbate dihydrate, CAS 5743-27-1, written out rather than abbreviated. - Release specification. Assay and basis, calcium, pH, loss on drying, mesh or granulation, metals and microbiology. - Quantity and pack. A pouch, a drum, or a granulated or blended variant. - Destination and Incoterm. Destination country, port or address, and the trade term. - Market documents. A COA, specification and SDS, plus any statement the importer needs for the destination. - Intended use and market. The use, whether supplement or food, and the market of sale. “Calcium ascorbate” on its own leaves too much open. The hydrate form moves the calcium and vitamin C figures, the mesh moves the line, and the market moves the document list. Commercial terms are quoted, not published here. ## The 1 kg qualification lot The pouch that qualifies the material is the 1 kg pack. Before scaling, test identity, assay, calcium, pH, water and microbiology; retain a sample from the same pack. Sample, COA and quotation should carry the same lot code. Untraceable material is a demonstration, not a qualification sample. A trial below a kilogram has to be repacked; it is not the catalogue pouch. It is drawn from a bulk lot, carries its own handling record and is not the 1 kg foil pack. Have the split confirmed in writing, and record its lot code with the trial results. Bench material and production material can be different lots even when the specification matches. Where flow is the question, ask for the granulated grade rather than the standard powder. Test the grade that will be bought: a successful run on a different particle size does not transfer to the production pack. ## Terms to agree before the first order Commercial and quality terms belong together on the quotation: Incoterm, pack, dispatch window, specification revision, one COA per lot, retained sample, retest period and the change route. Record them in a quality agreement before the first production order; after a dispute the conversation is harder. If a lot misses the agreed specification, the evidence is the retained sample and a joint re-test by the named method, not a photograph. The quality agreement should name the referee laboratory and say who pays for it. A return based only on appearance is difficult to defend either way. The product hub carries the catalogue specification; the COA page lists the release tests; the compliance page covers the market files; the MOQ glossary entry defines the term; the logistics page covers shipping and documents. ### 05 The regulatory file for calcium ascorbate URL: https://nutrition.rainwoodbio.com/products/vitamins/calcium-ascorbate/compliance/ Reviewed: 2026-11-20 Calcium ascorbate, CAS 5743-27-1, is the calcium salt of L-ascorbic acid. The file around it has four parts: the exact form and specification, the route by which it enters the market, the limits applied to the finished product, and the label that declares both vitamin C and calcium. The buyer's regulatory team confirms the route for the destination; this page names the frameworks and the documents that belong in the folder. In one lineCalcium ascorbate can be filed as an additive or as a nutrient source, and the route chosen decides the label, the limits and the documents. ## Four checks on the file The first check is identity: calcium ascorbate dihydrate, its CAS number and the version of the specification. The second is the route, which may be an additive with a technical function, a nutrient source in a food or supplement, or a dietary ingredient in the US. The third is the contaminant limit applied to the product as sold. The fourth is the label and its claims, which are reviewed apart from the material. The route changes the paperwork and the label. As an additive, the salt has an E number and a category-based use rule. As a nutrient source, it adds vitamin C and calcium to the nutrition declaration. The same powder can be correct in one category and outside the file in another, so write the category down before the specification is agreed. The folder should contain the specification, the lot certificate, the route, the limits that apply, the label and the change-control record. The frameworks below are starting points; the current text, read for the destination, decides the answer. Great Britain has its own register and labelling; Northern Ireland follows the EU framework. ## European Union In the EU, calcium ascorbate has the additive identity E302. Regulation (EC) No 1333/2008 governs additive use, and the specifications for listed additives sit in Regulation (EU) No 231/2012. The E302 entry describes the salt and gives identity and purity tests, including pH 6.0–7.5 in 10% aqueous solution and a specific rotation window for the L-form. Whether a particular food category may use the additive, and at what level, is a separate check against the current annex. For food supplements, the vitamin forms are addressed in Annex II of Directive 2002/46/EC, and the buyer's team confirms the calcium salt as the form named for the destination. Labelling follows Regulation (EU) No 1169/2011: the ingredient list names the salt, and the nutrition declaration gives vitamin C against the 80 mg NRV and calcium against the 800 mg NRV. This review found no harmonised maximum for vitamin C in supplements; a Member State may set its own. The additive and supplement routes remain separate. A product that uses E302 for an antioxidant function is not automatically filed as a vitamin C source, and the reverse is also true. The file should state which route applies and which instrument supports it. ## United States In the US, the dietary-supplement framework is the starting point. The Supplement Facts panel follows 21 CFR 101.36: vitamin C in mg and as a percentage of the 90 mg Daily Value, calcium in mg and as a percentage of the 1,300 mg Daily Value, and the source named in parentheses, for example “Vitamin C (as calcium ascorbate)”. Calcium ascorbate appears in the ingredient list. The basis on which the ingredient is positioned is a separate question: the supplier names the material, and the buyer confirms that the intended use fits the route. A US structure/function claim must be substantiated, carry the DSHEA disclaimer and avoid disease language. Calcium from the salt forms part of the supplement's calcium declaration: a 605 mg salt dose carries about 57 mg, or 4.4% of the Daily Value. ## Contaminants and limits Contaminant references for a food-supplement file | Parameter | Typical supplement reference | What the file should show | Lead (Pb) | 3.0 mg/kg in the EU supplement, as of this review | Lot result, method, limit and the finished-product calculation | Cadmium (Cd) | 1.0 mg/kg in the EU supplement, as of this review | Lot result and any category exception that applies | Mercury (Hg) | 0.10 mg/kg in the EU supplement, as of this review | Lot result and method | Arsenic (As) | Not harmonised in the EU; customer or market limit | The agreed limit and the method, stated on the certificate The values above apply to the product, not to the drum. The powder limits are Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg; the supplement limit is calculated after dilution and division into doses. Check the current text of Regulation (EU) 2023/915 before the label is fixed. No federal lead maximum applies to US supplements in this review; state rules such as Proposition 65 may. ## Labels and claims In the EU, Regulation (EC) No 1924/2006 and its register govern health claims. Vitamin C and calcium both have authorised claims, each with conditions of use. The claim belongs to the brand, and the form on the certificate has to match the form in the claim. Neither market allows a disease claim. In the US, a structure/function statement needs substantiation and the DSHEA disclaimer. The calcium contribution can support a calcium-related statement only if the conditions for that statement are met. The label review is separate from the ingredient specification. Two label points are specific to this salt: 500 mg of calcium ascorbate supplies about 413 mg of vitamin C, and a switch from ascorbic acid adds a calcium declaration the original label did not carry. No health claim is made on this page; the file is a specification and documentation record. ## Documents for the file - A batch COA carrying the assay and its basis, calcium, pH, water, IR identity, metals and microbiology. - A specification and technical data sheet that name the dihydrate and CAS 5743-27-1. - A 16-section safety data sheet. - Declarations for allergens, GMO status, origin and residual solvents. - The E302 additive statement, or the nutrient-source citation, as the destination requires. - A label mock-up with the ingredient name and both nutrient figures. - A change-control procedure covering source, process and pack. A folder of certificates without the route is not a regulatory file. The covering sheet should name the market, the category and the route. ## Checklist before the first order - The specification and COA name the form and CAS. - The route is chosen, with the instrument cited: E302 additive or nutrient source. - Contaminant limits are converted for the destination and the dose. - The label names the salt and declares both vitamin C and calcium. - Claims have been checked against the market and the form. - The version list and the change control are agreed. Framework references are collected in the EU, US and UK regulatory notes. The glossary defines the NRVs, the quality page describes the batch file, and the calcium ascorbate page carries the catalogue specification. ### 06 How we prove a calcium ascorbate lot is the salt URL: https://nutrition.rainwoodbio.com/products/vitamins/calcium-ascorbate/identity/ Reviewed: 2026-11-20 A calcium ascorbate lot is the named salt when five signals line up: the document names the dihydrate and CAS 5743-27-1, IR shows ascorbate, calcium lands near 9.4%, the specific rotation sits in the L-form window, and assay, calcium and water reconcile. The assay figure by itself does not distinguish the salt from ascorbic acid, a calcium filler or a diluted lot. Calcium and rotation are the discriminating measurements. In one lineIdentity is the agreement of four measurements: IR for the ascorbate, calcium for the salt, rotation for the isomer and the mass balance for dilution. ## The identity layers A certificate may use the right name without proving the solid. Each layer below answers a separate question and needs separate evidence; an answer to the first question alone describes the paperwork, not the material. Five checks on a calcium ascorbate lot | Layer | Question | Test | What it proves | Document | Is the form named? | Name, CAS number, formula | Paperwork only | Spectroscopy | Is the anion ascorbate? | IR against a reference | The ascorbate, not the counter-ion | Counter-ion | Is calcium present? | Calcium by complexometric titration or ICP-OES | The calcium content | Isomer | Is it the L-form? | Specific rotation | The natural isomer, not erythorbate | Mass balance | Is it diluted or blended? | Assay, calcium, water, ash | Consistency of the figures The catalogue identity is IR plus titration. That pair is a workable release check, but it does not count calcium and does not separate the L-form from D-isoascorbate, which reduces iodine in the same way. Calcium and rotation close those gaps. ## The calcium ratio: proving the salt One calcium ion sits between two ascorbate ions. In the dihydrate, C12H14CaO12·2H2O at 426.34, calcium is 40.08 ÷ 426.34 = 9.40% of the mass. The anhydrous salt, at 390.31, carries 10.27%. A catalogue window of 9.0–10.0% therefore fits a mostly dihydrate powder whose drying history varies a little. The pair can be checked against each other. A lot with 99.5% assay and 9.4% calcium fits the dihydrate. A lot with 99.5% assay and 8.0% calcium does not: 8.0% calcium corresponds to roughly 85% of the salt, so the assay is overstated, the calcium is understated, or something else is in the powder. As a working factor, each 1% of calcium represents about 10.6% of the dihydrate. Specific rotation checks the isomer. The EU E302 specification gives +95° to +97° at 20 °C for a 5% aqueous solution, as of this review. Erythorbic acid and its salts are the D-form; they consume iodine like ascorbate but rotate differently and are not vitamin C. A titration-only certificate cannot make that distinction. Complexometric calcium is a quantity test, not a fingerprint. At alkaline pH the magnesium present precipitates, removing the main interference, but the titration still measures calcium rather than the calcium–ascorbate pair. ICP-OES is element-specific and is the result to request when the form is disputed. ## X-ray diffraction: the solid-state check XRD asks whether the solid is crystalline and whether its pattern fits the dihydrate reference. It separates the dihydrate from the anhydrous form and from an amorphous blend, and it can compare two suppliers' lots. It is neither a purity assay nor a counter-ion measurement. On a disputed lot, XRD, calcium and IR together carry more weight than any single test. XRD is not a routine release test for this material; “XRD conforms” without a pattern or reference adds little. Before accepting a match, ask for the reference pattern and the detection limit. Its main use is a solid-form dispute rather than a potency question. ## What adulteration looks like Common substitutions and their signals | Adulterant | What it does | Signal | Test | Ascorbic acid | Raises the iodometric assay; brings no calcium | Calcium under 9.0%; pH under 6.0 | Calcium, pH, IR | Erythorbate | Same reducing power, wrong isomer | Rotation outside the L-form window | Specific rotation, IR | Calcium carbonate | Lifts calcium while diluting the ascorbate | High calcium, low assay, fizzing in acid | Assay, ash, acid test | Calcium gluconate | Calcium near 9.3%, little ascorbate | Normal calcium, low assay | Assay, IR, HPLC | Dilution | Pulls assay and calcium down together | Both low; ash or water high | Mass balance, ash | Water | Raises the water figure, lowers the as-is assay | High water; normal dried-basis assay | Loss on drying Appearance is the weakest evidence. White to off-white covers a broad range, and oxidation can tint a lot that still passes the titration. Calcium, rotation and the mass balance are the stronger signals. With appearance and assay but no calcium or rotation, the likely substitutions remain untested. ## How to write identity into the specification - “Calcium ascorbate dihydrate, CAS 5743-27-1, C12H14CaO12·2H2O.” - “Assay 99.0–101.0% by iodometric titration; state the basis.” - “Calcium 9.0–10.0%; report the method, and use ICP-OES where the form is disputed.” - “Identification by IR against a reference; specific rotation within the L-form window where the isomer is a risk.” - “pH 6.0–7.5 at 10%; loss on drying ≤2.0%; mesh as agreed.” - “No ascorbic acid, erythorbate or calcium filler above the stated limit.” ## Five questions for the supplier - Which hydrate form is this lot, and which CAS number appears on the certificate? - What calcium result was obtained, by which method, and does it fit the assay and the water figure? - Will you share the IR spectrum and the specific rotation, not just the assay percentage? - Is the assay on the dried basis or as-is, and how was the basis calculated? - If this lot is challenged, will you re-test the retained sample jointly? Five clear answers build an identity file; an assay percentage alone does not. The product hub carries the catalogue specification; the COA page shows where each figure sits on the certificate; the grades page compares the forms; the FTIR method note explains the spectrum; the XRD note covers the solid-state check; the vitamin C hub covers the acid. ### 02.1 Calcium ascorbate vs ascorbic acid: pH, calcium and the label URL: https://nutrition.rainwoodbio.com/products/vitamins/calcium-ascorbate/grades/calcium-ascorbate-vs-ascorbic-acid/ Reviewed: 2026-11-20 The same vitamin arrives in two different chemical packages. The salt carries one calcium ion for every two ascorbate ions, so 1 g of the dihydrate supplies about 826 mg of ascorbic acid equivalent and 94 mg of calcium, and its 10% solution sits at pH 6.0–7.5 against pH 2.1–2.6 for a 5% ascorbic acid solution. The choice changes the pH, the calcium load, the fill weight and the label. In one lineCalcium ascorbate supplies about 83% of its mass as ascorbic acid equivalent and 9.4% as calcium, at pH 6.0–7.5 instead of the acid's 2.1–2.6; the label carries all three facts. ## Two materials, one vitamin Both contain the ascorbate anion; the cation is what changes. The acid is CAS 50-81-7, and the calcium salt is CAS 5743-27-1, normally the dihydrate. The molecular weight moves from 176.12 to 426.34: one calcium atom and two water molecules replace two acid protons. Ascorbic acid against calcium ascorbate dihydrate | Property | Ascorbic acid | Calcium ascorbate | CAS number | 50-81-7 | 5743-27-1 | Formula | C6H8O6 | C12H14CaO12·2H2O | Molecular weight | 176.12 | 426.34 | Vitamin C per gram | 1.000 g | 0.826 g | Calcium per gram | None | 0.094 g | pH | 2.1–2.6 (5% solution) | 6.0–7.5 (10% solution) | Label name | L-ascorbic acid | Calcium ascorbate (calcium L-ascorbate) The table is a comparison, not a ranking: each form has its own CAS number, label name and release specification. ## pH: the first thing the formula notices A 5% solution of the acid reads pH 2.1–2.6; a 10% solution of the salt reads 6.0–7.5. The windows are measured at different concentrations, but they do not overlap and the practical difference is several pH units. As the calcium salt of the conjugate base, it releases fewer protons. That is why it suits an acid-sensitive matrix: a carbonate, a protein, a gel or a chew. A tart beverage must get its acidity from another acid; rebuilding the profile is a formula change, not a substitution. Stability is the second pH consequence. Dissolved, the neutral salt oxidises faster than the acid: the form that is gentler on the matrix is harder on the vitamin. A dry capsule mostly avoids the issue; a drink or a gel does not. ## The calcium the label carries Calcium ascorbate is about 9.4% calcium by mass in the dihydrate: one calcium atom at 40.08 in a molecule of 426.34. A 605 mg dose carries about 57 mg of calcium; a 1,210 mg dose carries about 114 mg. The anhydrous salt, at 10.27%, carries slightly more per gram. Calcium is declared. In the EU, the nutrition declaration gives calcium as a percentage of the 800 mg NRV; 57 mg is about 7.1%. The US panel uses a 1,300 mg Daily Value, making 57 mg about 4.4%. The ingredient list names the form that was weighed. Calcium is evidence as well as a label fact. A lot with 9.4% calcium and a 99–101% assay fits the dihydrate; low calcium suggests acid or dilution, high calcium a filler. ## Dose arithmetic and fill weight The conversion follows the two ascorbate ions per calcium ion: 352.25 ÷ 426.34 = 0.826. Each gram of the dihydrate yields 0.826 g of ascorbic acid equivalent; each gram of the acid requires 1.210 g of the salt. A label declaring 500 mg of vitamin C needs 500 ÷ 0.826 = 605 mg of the salt, which brings 56.9 mg of calcium. If the label declares 605 mg of the salt, the vitamin C delivered is 500 mg. These are arithmetic, not recommendations; they keep label and weigh-up aligned. A second correction comes from the assay basis. A lot at 99.5% dried with 1.0% water is 98.5% as-is, so its vitamin C equivalent is 98.5 × 0.826 = 81.4%. Correct for water first, then apply the salt factor, and apply each only once. Fill weight follows. Where 500 mg of the acid would do, the same vitamin C needs 605 mg of the salt, which can change capsule size or stick weight. In a small capsule it can decide whether the dose fits; a tablet adds compression. ## What the label has to say In the EU, the ingredient list names the form: “calcium ascorbate” or “calcium L-ascorbate”. The nutrition declaration gives vitamin C in mg and as a percentage of the 80 mg NRV, and calcium in mg and as a percentage of the 800 mg NRV. E302 is the additive number, used on a label when the salt is an additive, not when it is the supplement's vitamin source. US labels put vitamin C in mg and as a percentage of the 90 mg Daily Value in the Supplement Facts panel, with the source in parentheses: “Vitamin C (as calcium ascorbate)”. Calcium is declared separately, and the ingredient list names the salt. By mass, the salt is 82.6% vitamin C. Calling the salt mass “vitamin C” overstates the vitamin by about 21%; omitting calcium understates a nutrient the customer may count. A switch moves the name, mass, pH and calcium figure; the vitamin C figure holds only if the dose is recalculated. Claims are reviewed separately. No health claim appears here; the brand checks claim wording against the market, the form and the product. ## When the salt is the right choice Choosing between calcium ascorbate and ascorbic acid | Situation | Calcium ascorbate | Ascorbic acid | Acid-sensitive matrix | Fits | May attack the matrix | Stick pack or drink mix | Less sour, with a mineral note | Sharp sour | Label with a calcium limit | Adds calcium | No calcium from the vitamin | Dry capsule, tight fill | More mass per dose | Denser | Acidic beverage | Needs another acid | Fits the profile | Chew or gummy | Less sour; mineral note | Sharp; may need a coating The salt fits when the formula cannot take the acid, the taste has to be less sour, or the calcium is welcome on the label. The acid fits a dry swallowed formula, a calcium limit, or a product where acidity is the point. Without either constraint, the acid is simpler and a switch gains nothing. Either direction requires a new specification, stability work, a label review and change control; the balance alone is not enough. The calcium ascorbate page carries the catalogue specification; the grades page places this comparison in the wider range; the vitamin C hub carries the acid; the sodium salt page covers the other counter-ion; the stability page covers the oxidation path; the methods library explains the assays; the quality page covers release. ### 01 What the COA for D-chiro-inositol actually contains URL: https://nutrition.rainwoodbio.com/products/vitamins/d-chiro-inositol/coa/ Reviewed: 2026-11-20 Read a D-chiro-inositol certificate from the isomer outward. The document should name the cyclitol and its CAS number, show an assay that separates D-chiro from myo, and account for moisture, the metal panel, the microbial count and the sieve result. The figures in the table are the catalog gates; the lot's own numbers belong in a separate column, with the method that produced each one. In one lineThe isomer is the audit trail: a D-chiro figure counts only when the method separates it from myo, the basis is stated and the rest of the powder is accounted for. ## Reading the certificate as evidence Each line should survive three questions: what was tested, how, and against which gate. A row that says only “conforms” closes the question instead of answering it. The identity rows and the assay row are separate evidence, and in this product one does not imply the other. Appearance is a release line — white to off-white, free-flowing powder — but a weak one, because the most likely substitute looks the same. The useful information sits in the isomer result and in the method behind it. Release lines for a D-chiro-inositol lot | Parameter | Method | Release limit | Identification | HPLC retention; infrared spectrum | Conforms to reference | Assay, D-chiro | HPLC with refractive-index or light-scattering detection | ≥98.0% | Myo-inositol | Isomer-resolving HPLC | Agreed ceiling; reported per lot | Melting point | Capillary method | 225–230 °C | Loss on drying | Gravimetric | ≤0.5% | Heavy metals | ICP-MS, element by element | Pb ≤3; As ≤2; Cd ≤1; Hg ≤0.1 mg/kg | Microbial count | Plate count | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g | Absence tests | Enrichment and isolation | E. coli absent; Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh ## Assay basis, moisture and the isomer gap The catalog asks for ≥98.0% and for loss on drying ≤0.5%, but it does not fix the assay basis in the parameter name. As-is and dried-basis figures are not interchangeable: 97.6% as received with 0.4% moisture becomes 98.0% on the dried basis, and a buyer comparing two certificates needs to know which convention each one uses. The basis belongs in the assay row, not in a footnote. At 98.0%, two percent of the powder is something else. It could be myo-inositol, another cyclitol, water, a carrier from a dilution, or material carried over from a plant extraction. An assay that sums all inositols cannot say which. The lot needs a resolving method, a standard for each isomer and a stated ceiling for myo-inositol. Inositol has no useful ultraviolet chromophore, which shapes the method. Most laboratories use refractive index, light scattering, or a derivatisation step ahead of ultraviolet or mass detection. Each has quirks: refractive index drifts with temperature, light scattering is not linear across a peak, and derivatisation adds recovery losses. The certificate should name the detector, column, mobile phase and standard, and the laboratory should show that the two isomers actually separate. Melting point is the weakest identity line here. The catalog range of 225–230 °C sits on top of the myo range, so a pass says the solid is a crystalline inositol, not which one. It is a purity check that has been asked to do an isomer's job. ## Gate and result are different columns The gate is fixed by the specification; the result is what the lot produced. When the result column simply repeats the gate, the certificate has said nothing about the batch. Keep the two apart and put the method beside them. What the result column should show | Parameter | Gate | Result evidence | D-chiro assay | ≥98.0% | Measured percentage, with the basis | Myo-inositol | Agreed ceiling | Measured percentage from a resolving run | Loss on drying | ≤0.5% | Measured percentage | Heavy metals | Per element | A figure for each element, not a total | Microbiology | Counts and absence | The lot's count and absence statement “Passes specification” is a conclusion; the numbers should lead there without help. For the isomer that means a second value with its own ceiling, not a note that the main peak looked clean. ## Where one batch differs from the next Crystallisation changes habit and colour; drying changes moisture; milling changes the sieve result. A move from one mesh to another is a finishing change rather than a chemical one, yet the certificate still has to carry the new sieve figure and the specification has to name the mesh that was bought. Source adds a second axis. An epimerised myo route and a plant extraction can both reach 98.0% while carrying different minor cyclitols and different residual sugars. Colour is a poor test but a useful hint: a batch that browns in storage points to sugar carry-over, not to an isomer failure. Watch the direction of travel across several lots: an assay sliding toward the gate, moisture climbing, a myo peak growing. One result near an edge proves little; a sequence does. Tie each certificate to the pack and the retained sample by lot code, and count a missing lot code as a documentation defect. ## When an outside laboratory earns its place Independent testing makes sense at four moments: a new source, a first entry into a regulated market, a label that declares D-chiro while the certificate reports only total inositol, and a disagreement about a specific lot. The panel should not be a photocopy of the certificate. Ask for a resolving assay with a myo standard and a spiked sample, optical rotation, moisture, ICP-MS and a plate count. Add nuclear magnetic resonance if an unidentified cyclitol appears, and ask for the detection limit behind every “not detected” statement. Without that limit the line describes the method's sensitivity, not the sample. Keep the chain intact. The sample that was tested should be the sample that was retained, and the report should carry the lot code. A referee needs the specification, the retained sample and a method capable of separating the isomers; a repeat of the same sum assay will not settle an isomer dispute. ## Six things to line up between suppliers Compare the isomer and CAS number; the assay and its basis; the myo figure and the method behind it; moisture; the metal and microbial results; and the pack with its lot code. Agreement on the assay alone can conceal a different isomer or a different basis. Start with the specification on the D-chiro-inositol product page, then read the isomer evidence on the identity page. The supply forms are set out on the grades page; the detection choices are described in the methods section; the release workflow is on the quality page. ### 02 D-chiro-inositol supply forms: powder, granulation and the blend URL: https://nutrition.rainwoodbio.com/products/vitamins/d-chiro-inositol/grades/ Reviewed: 2026-11-20 D-chiro-inositol leaves the factory as a single-isomer powder, usually milled to 80 mesh, with a granulated option and with source and assay variants that change what else travels in the drum. A 40:1 myo blend is a separate formula with two label names, not a grade of this product. Within the single isomer, the choices that matter are the source, the mesh and the ceiling placed on myo-inositol. In one lineThe isomer is fixed; the variables that change a D-chiro-inositol purchase are the source, the mesh and the ceiling on myo. ## An assay range is a gate, not a description Two certificates can both read “D-chiro-inositol ≥98.0%” while one lot carries 1.4% myo-inositol and the other 0.2%. A third can be the same molecule recovered from plant material, with a different set of minor cyclitols and sugars. The percentage is the entry ticket; it does not describe the powder behind it. The production route is the first hidden variable. D-chiro-inositol can be made by epimerising myo-inositol, or recovered from a plant source. Each route leaves its own minor profile: a plant extract can carry other cyclitols and residual sugars, while an epimerisation route has to control the isomer distribution. Neither route is inherently better, but the certificate has to match the route, and the specification has to name the source it was written around. Presentation is the second variable. The catalog material is a powder at ≥95% through 80 mesh; a granulated version is a different specification with its own certificate. They are not two descriptions of one drum. ## The forms, and the blend that is not one of them D-chiro-inositol forms against the two-ingredient blend | Option | What it is | Label name | Where it fits | What to watch | Single-isomer powder, 80 mesh | Catalog grade | D-chiro-inositol | Capsules, tablets, stick packs | Moisture pick-up; fine dust | Granulated single isomer | Agglomerated powder | D-chiro-inositol | Sachets and fast filling lines | Any binder enters the label | Tighter myo ceiling | Same isomer, narrower profile | D-chiro-inositol | Labels with an isomer claim | Depends on the source route | 40:1 pre-blend | Myo plus D-chiro, weighed together | Both names | Products that declare the ratio | The minor fraction can separate | Myo-inositol | The meso isomer | Myo-inositol | Products built on myo | A different ingredient entirely The first three are one ingredient at different presentations. The blend is a formula and myo is another molecule, so treating either as a grade of D-chiro is how a label goes wrong. ## Fineness, moisture and flow An 80 mesh opening is roughly 177 µm. At that fineness the powder wets quickly, fills a small capsule evenly and blends well with other fine excipients, but it also throws dust, holds static and cakes once the pouch has been opened. D-chiro-inositol is hygroscopic, and a fine powder puts more surface in contact with humid air than a granulated one. Granulation improves flow but adds a declaration. Agglomerated particles run more evenly on a sachet line and make less dust, but any binder used to build them joins the ingredient list. The assay and the moisture result belong to the granulated lot, not to the powder that entered the granulator. Density is not in the catalog specification. If the filler or the sachet machine is sensitive to it, request bulk and tapped density on the actual lot. A new mesh or a granulation step is a new specification, not a packing note. ## What the choice does in the finished product In a capsule, fill weight, flow and moisture pick-up during the run are the practical constraints. The 80 mesh powder is the default; a granulated grade helps when the hopper bridges or the dust is unacceptable. In a tablet, compression and room humidity matter more than the last decimal of the assay, and a hygroscopic fill needs a short hold before the press. In a stick pack, dissolution is rarely the limit because the powder dissolves to a clear solution. Wetting and clumping are the limit, and a granulated grade disperses more evenly than a very fine one. Taste and mouthfeel depend on the powder's fineness and the rest of the blend. A 40:1 blend introduces a mixing problem. D-chiro is one part in 41, about 2.44% of the inositol mass, and a fraction that small can separate in a drum or a hopper. A 4,100 mg total carries 4,000 mg myo and 100 mg D-chiro. The blend needs a pre-blend, a granulated blend or a fixed mixing order, and the certificate should give a value for each isomer. ## What the specification should say - “D-chiro-inositol, CAS 643-12-9, C6H12O6; source route declared.” - “Assay ≥98.0% by HPLC; column, mobile phase, detector and standard named.” - “Myo-inositol ceiling agreed per order and reported from a resolving method.” - “Loss on drying ≤0.5%; melting point 225–230 °C; metals and microbiology as listed.” - “Particle size ≥95% through 80 mesh; granulated on request, with the binder declared.” - “Destination market and label name confirmed before the order.” “Inositol 98%” is not an adequate line. It leaves the isomer, the source, the mesh and the myo ceiling open, and a grade name left that open can cover a powder the label cannot declare. ## When a different purchase is the right one If the label says myo-inositol and the formula was built around the bulk grade, D-chiro is the wrong material however high the assay. If the label declares a 40:1 ratio, buying the single isomer and adding myo in-house is possible, but the blend then belongs to the buyer's process, and the supplier's certificate no longer covers the ratio. A tighter myo ceiling is worth buying when a label or a customer specification depends on it. Granulation is worth buying when flow, dust or density is the real constraint. Neither is a quality upgrade on its own, and neither replaces a certificate that matches the drum. The catalog specification sits on the D-chiro-inositol product page; the release lines are on the COA page; the isomer question is taken further on the D-chiro versus myo page; the other isomer is described on the inositol product page; release practice is on the quality page. ### 02.1 D-chiro-inositol vs myo-inositol: two isomers, two labels URL: https://nutrition.rainwoodbio.com/products/vitamins/d-chiro-inositol/grades/d-chiro-inositol-vs-myo-inositol/ Reviewed: 2026-11-20 Both names refer to a compound with the formula C6H12O6 and a mass of 180.16, and both are white, water-soluble powders that melt in the same neighbourhood. The difference is spatial: myo-inositol is meso and optically inactive, while D-chiro-inositol is chiral. That one fact drives separate CAS numbers, separate specifications and two separate label names, and it is why a 40:1 product has to declare two ingredients. In one lineSame atoms, same mass, different shape: myo is the meso bulk isomer, D-chiro is the chiral one, and any blend of the two is a two-ingredient label. ## One ring, two arrangements Each molecule is a six-carbon ring carrying one hydroxyl group per carbon. What changes between the isomers is the direction those groups point. Myo-inositol has a plane of symmetry, which makes it a meso compound and leaves it optically inactive. D-chiro-inositol has no such plane, so it is chiral and rotates plane-polarised light. The atoms and the mass are identical; the shape is not. That similarity is a practical problem. A certificate that reports “inositol” without naming the isomer describes a family, not a material. The two are separate purchases with separate specifications, and neither becomes the other through drying, milling or blending. The two isomers at a glance | Property | Myo-inositol | D-chiro-inositol | CAS number | 87-89-8 | 643-12-9 | Symmetry | Plane present; meso | Plane absent; chiral | Polarised light | No rotation | Rotates | Melting range | 224–227 °C | 225–230 °C | Catalog mesh | ≥95% through 40 mesh | ≥95% through 80 mesh | Label name | Myo-inositol | D-chiro-inositol The melting ranges overlap and the powders look alike, so neither appearance nor a melting point can settle which isomer is in the drum. Those tests describe the solid; they do not name it. ## What 40:1 is counting A 40:1 product contains forty parts myo-inositol to one part D-chiro-inositol by weight. Equal molecular masses make the weight ratio and the molar ratio identical, which keeps the arithmetic simple. A 2,050 mg total holds 2,000 mg myo and 50 mg D-chiro; the D form is 50 ÷ 2,050, or roughly 2.44% by weight. A 4,100 mg total holds 4,000 mg and 100 mg. The ratio is a formula statement, not a strength. It is calculated from two measured isomer values, never by subtracting one from a total, and it only means something if the blend is uniform. One part in 41 can separate in a drum or a hopper, so the process needs a pre-blend, a granulated blend or a fixed mixing order, and the certificate should report each isomer. State the basis as well: by weight, with both quantities. A front-of-pack ratio without the two names and the two amounts asks the reader to guess what is inside. ## Two names, two label duties The ingredient list has to carry both names when both are present. In the EU, the quantity per portion goes in the nutrition declaration or the supplement particulars, and since neither isomer has a reference intake, no percentage NRV is printed. In the US, the Supplement Facts panel declares the amount per serving with “Daily Value not established”, and a separately added D-chiro ingredient should be named rather than folded into a generic inositol line. Great Britain follows the same naming logic under its retained rules, and Northern Ireland sits under the EU framework. A single-isomer pack runs the rule in reverse. A product labelled myo-inositol should not carry an undeclared D-chiro fraction, and a product labelled D-chiro-inositol should not be filled from a myo lot. The name on the pack, the value on the certificate and the specification have to agree. “Inositol” on its own is ambiguous. It can work where the ingredient is genuinely myo-inositol and the market accepts the common name, but it is not a synonym for either isomer in a purchase order or a specification. ## Proving which isomer is present The assay has to resolve the two. A single inositol peak gives the sum, and the sum cannot distinguish a pure D-chiro lot from a blend. The method needs a standard for each isomer, a demonstrated separation and a stated detection limit, and a spiked sample is the simplest evidence that the separation holds. Inositols have no useful ultraviolet chromophore, so detection usually relies on refractive index, light scattering or mass spectrometry, sometimes after derivatisation. Polarimetry is the independent chiral check. Myo is inactive, D-chiro rotates, and a lot that passes a summed assay while showing no rotation has not demonstrated the D form. Rotation also tells D from L by sign, though a racemate is inactive and needs a chiral separation to resolve. Diffraction contributes the solid-state view. It confirms the crystal form and can expose a second crystalline phase, but it cannot separate D-chiro from L-chiro because mirror lattices produce the same pattern. The strongest file reads the separation, the rotation and the pattern together, as the identity page sets out. ## Solubility and the equal-mass trap Both isomers dissolve to a clear solution and both take up moisture from the air. The D-chiro catalog grade is finer, at 80 mesh against the myo grade's 40 mesh, so it wets faster and throws more dust. Solubility is finite in both cases; a concentrated stock should be checked at the concentration actually used. Because the masses are equal, a milligram of either isomer carries the same inositol mass. A total-inositol assay therefore cannot see a substitution, and a formula's fill weight does not change when the isomer changes. Equal mass does not make the materials interchangeable: the label, the specification and the certificate all change, and a switch is a relabelling and revalidation rather than a like-for-like swap. ## Choosing, and what a switch changes Take myo-inositol alone when the label says myo or plain inositol and the formula is built on the bulk grade: one ingredient, one assay, one label entry, and a 40 mesh powder that suits most capsules and tablets. Take the single D-chiro isomer only where the pack names the D form and the specification, assay and certificate repeat that name. Take a 40:1 blend only where both isomers are declared and the line can control the minority fraction. At a fixed total, D-chiro is one part in 41 and myo is the other forty, so changing the ratio changes both quantities and the fill weight. A blend is not a way to avoid declaring D-chiro; if both isomers are present, both must be declared. A switch in either direction moves the label, the specification, the assay and the release tests. The D-chiro product page carries the single-isomer specification; the inositol page covers the myo grade; the inositol comparison takes the blend arithmetic further; the D-chiro grades page sets out the forms; the compliance page covers the market file; the methods section explains the separation; the quality page describes release. ### 03 D-chiro-inositol is stable dry; moisture and the matrix decide the shelf life URL: https://nutrition.rainwoodbio.com/products/vitamins/d-chiro-inositol/stability/ Reviewed: 2026-11-20 A D-chiro-inositol crystal has no ester, acetal or glycosidic link to hydrolyse, so heat below its melting range and ordinary light leave the molecule largely unchanged. What limits the lot is the powder's surroundings: moisture that leads to caking, and water that lets microbes grow once the material is dissolved. The retest period follows from data on the pack that will actually be stored. In one lineNothing in the molecule invites decay; the shelf life is decided by moisture, caking and, in solution, the microbial load. ## The powder: water, caking and the seal Loss on drying is capped at ≤0.5% at release. That cap is a gate for the lot, not an allowance for storage. D-chiro-inositol takes up moisture, and an 80 mesh powder offers a large surface for it; after the pouch is opened, moisture rises, the powder cakes and the as-is assay slides even though no molecule has changed. The pack is the first control. A foil pouch keeps water out only while its heat seal is intact, and a pouch rolled closed after opening is not sealed in that sense. A desiccant can help in a humid room but cannot replace the seal. The 25 kg drum depends on its liner, so the liner stays shut and the drum stays off a damp floor. Light is a secondary issue for a cyclitol, which has no chromophore to absorb it, but the pouch is opaque because it is a moisture barrier and there is no reason to move the powder into clear glass. Temperature acts through humidity and through caking: a hot bay raises the humidity around the pouch, and a cold pack opened too soon condenses water onto the powder. Let a cold pack reach room temperature before opening it. ## The solution: chemically quiet, microbiologically exposed D-chiro-inositol dissolves to a clear solution, and the molecule has no hydrolysis route and no great sensitivity to process heat, so a beverage step does not degrade it the way it might degrade an ester or a vitamin. The risks move to the water: microbial growth in an unpreserved liquid, pH-driven colour change in a plant-derived extract, and browning where residual sugars meet amino compounds. A stick pack sidesteps the solution shelf life because water is added at the point of use. A ready-to-drink product does not, and it needs a preservation and process strategy plus a stability result generated in the drink. If a liquid is unavoidable, control the pH, exclude light, keep oxygen low and validate the hold time before filling. ## What moves a lot in storage Storage factors for D-chiro-inositol | Factor | Effect on the lot | Practical control | Water | Raises loss on drying; caking; lower as-is assay | Sealed pouch or lined drum; desiccant in a humid room | Heat | Moves moisture and accelerates caking | Controlled store; cool process | Light | Small effect on the molecule; colour risk in plant extracts | Opaque pack; dark store | pH | Colour and behaviour in a liquid matrix | Validate the matrix pH | Microbes | Growth in an unpreserved solution | Preservation, process and hold-time validation | Source impurities | Sugars and other cyclitols carried through extraction | Source specification and certificate review The factors compound. A warm, humid room is worse than either condition alone, and an open pouch in a kitchen shows the result quickly: a crust at the surface, lumps in the scoop and a fill weight that no longer matches the plan. ## Designing the stability work A protocol is only useful when it names the pack, the condition, the time points and the tests. The table gives the usual structure for the ingredient; a liquid arm is added where a liquid is the intended format. Storage conditions and what they cover | Condition | What it covers | Tests at each point | 25 °C, 60% RH | Long-term warehouse storage | Assay, myo, moisture, appearance, rotation, micro | 30 °C, 65% RH | Warm warehouse and transport | The same panel | 40 °C, 75% RH | Accelerated stress on the pack | The same panel, with seal inspection | Matrix arm | The finished product at its pH and heat load | The same panel plus colour and taste Test the D-chiro assay on a resolving method, the myo figure, moisture, appearance, optical rotation and the microbial count. Report the individual results rather than a pass line, and name the pack and the lot family. A 1 kg pouch and a 25 kg drum differ in headspace and in how often they are opened, so data from one does not automatically cover the other. For a plant-derived lot, add colour and residual sugar to the panel. A material that meets the assay but darkens over time has a source issue, and the stability file is where it becomes visible. ## The formula changes the question A capsule or tablet begins with low water activity, but the shell and the excipients can still pass moisture into a hygroscopic fill, so moisture and appearance are checked at release and again after storage. A stick pack lives or dies at its seal: one pinhole in the laminate is enough, so the strip is checked as well as the powder. Neither format inherits the bulk pouch's shelf life. A gummy or chew brings a water-based matrix, a high water activity and process heat; a beverage adds pH, oxygen and microbes. The bulk result is a starting point for all of them, not the answer. An overage belongs to the label and stability decision, and it cannot repair a pack that lets water in. ## How the retest period is set No single shelf-life figure applies to D-chiro-inositol, because the pack and the storage condition determine it. The retest period sits on the specification and rests on data generated in that pack. A figure that omits the pack and the condition is marketing, not a shelf life. When the retest period ends, re-assay the retained sample before extending use. Extension by assumption is not a result, and a bulk figure does not transfer to a repacked container. The standard packs are listed on the D-chiro-inositol page; the COA page covers the release lines; the MOQ page covers pack and lead time; the methods section explains the isomer assay; and the quality page describes the release file. ### 04 D-chiro-inositol: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/vitamins/d-chiro-inositol/moq/ Reviewed: 2026-11-20 The minimum order for D-chiro-inositol is 1 kg, packed in a foil pouch; production material comes in a 25 kg fiber drum, and the catalog grade is quoted at 1–7 days from confirmation. Before two quotations can be compared, the buyer needs to fix six things: the isomer and CAS number, the assay and myo ceiling, the quantity and pack, the destination and Incoterm, the document set and the intended market. In one lineA kilogram is the smallest unit that can be sampled, tested for the isomer and traced back to one lot. ## Why the entry point is 1 kg A single kilogram can supply a bench trial, a retained sample and an independent isomer check, all from one lot. It also moves as a parcel, which helps when a trial has to start before production is scheduled. The pack carries a lot code and a certificate, so it is a commercial unit rather than a scoop from a drum. Below a kilogram, material is normally split from a larger lot and repacked. Handling increases, the original pack identity disappears and the link between certificate and powder becomes harder to defend, while the chemistry is unchanged. A 25 kg drum reduces handling per kilogram, but it ties up inventory of a hygroscopic powder for longer. The minimum is about pack identity, not about pushing volume. ## Packs and formats D-chiro-inositol packs | Pack | Fill weight | Where it is used | Points to note | Foil pouch | 1 kg | First trial and small runs | Keeps water out; close it after use | Fiber drum | 25 kg | Bulk production | Lined; the code is repeated on drum and liner | Granulated form | On request | Better flow, less dust | Any binder appears on the label | Other mesh | On request | A fill or dispersion requirement | New particle-size specification The catalog powder passes ≥95% through 80 mesh. Granulation or a different mesh creates a new specification rather than a packing variant, and it moves both the certificate and the lead time. State any flow or fill requirement before the quotation, because the change has to be built into the offer. ## Lead time and dispatch The 1–7 day window runs from order confirmation and covers picking, document preparation and dispatch. Transit, customs clearance and the buyer's own quality release sit outside it. Granulation, another mesh or a non-standard pack needs extra time, and the offer should show it separately rather than hide it in the range. Ask for a dispatch date, not just the range. A pouch usually travels as a parcel and a drum on a pallet, and the Incoterm decides who books the freight and who clears entry. The certificate and the other lot documents should travel with the goods, not arrive afterwards. ## What a quotation has to pin down The six items below are the difference between an offer that can be compared and one that has to be queried. The six details of a comparable quotation | Item | What to state | Product and isomer | D-chiro-inositol, CAS 643-12-9, not “inositol” | Specification | Assay and basis, myo ceiling, moisture, mesh, metals, microbiology | Quantity and pack | 1 kg pouch, 25 kg drum, granulated or custom mesh | Destination and Incoterm | Country, port or address, trade term | Documents | COA, specification, SDS, market-specific statements | Use and market | Supplement, food or other use, and the country of sale A quotation that omits the isomer or the destination cannot be assessed, because the same powder can fit one label and fall outside another. Commercial terms belong on the quotation, not on this page. ## A sample has to be traceable The 1 kg pouch is the qualification lot. Check identity, the D-chiro assay, the myo figure, moisture and the microbial count, and hold back a portion of that same pack before scaling. The code on the pouch, the certificate and the offer should match; without a code the material is a demonstration. A trial that needs less than a kilogram is a repack. It is drawn from a bulk lot, carries its own handling record and is not the catalog pouch. Ask for the split in writing and file its code with the trial data. The bench powder and the drum powder can come from different lots even when both meet the same specification. ## Terms to settle before the first order Put the commercial and quality terms on one page: Incoterm, pack, dispatch window, specification revision, COA for each lot, retained sample, retest period and the route for a change. Settle them in a quality agreement before the first production order, when the conversation is still easy. If a lot misses the agreed specification, the answer is a joint re-test of the retained sample on the named method, not a picture of the drum. The offer and the agreement should name the referee laboratory and say who pays for it. A return based on appearance alone is hard to defend on either side, and appearance is a particularly weak test for this isomer. The catalog entry is on the D-chiro-inositol page; the COA page covers the release lines; the compliance page holds the market file; the glossary's MOQ entry explains the abbreviation; shipping documents are on the logistics page; and the quality page covers release. ### 05 The regulatory file for D-chiro-inositol URL: https://nutrition.rainwoodbio.com/products/vitamins/d-chiro-inositol/compliance/ Reviewed: 2026-11-20 D-chiro-inositol is a defined isomer, so its file cannot borrow the status of myo-inositol or of “inositol” in general. The specification and the certificate describe the material; the regulatory file records whether that material can be sold where it is going, at what limit and under which name. The buyer's regulatory team confirms that route, and this page sets out the framework and the evidence to keep. In one lineThe file stands on the named isomer, not on the inositol family: D-chiro-inositol, its specification and its destination route are checked together. ## What the file has to hold A workable file has four parts: the current specification, with the isomer, CAS number and source; the certificate that released the lot; the destination's limits and label requirements for the finished product; and a change-control record covering source, process and pack. The technical data sheet states the specification and the safety data sheet covers handling, but neither decides the market route. Around those four sit the supporting statements: source and origin, allergens, GMO status, residual solvents, and any market-specific declaration the importer asks for. Keep an index with version numbers so a reviewer can see which documents belong to which specification. A missing statement is easier to close at quotation than after the goods have shipped. ## European Union A food supplement reaches the EU market under Directive 2002/46/EC, is labelled under Regulation (EU) No 1169/2011 and is claimed under Regulation (EC) No 1924/2006. D-chiro-inositol is a specific substance rather than a synonym for inositol, so the first question is its position under the novel-food Regulation (EU) 2015/2283. Where a documented history of significant consumption before 15 May 1997 is absent, authorisation is needed and the permitted form and conditions appear on the Union list in Regulation (EU) 2017/2470. As of this review, the status of the exact D-chiro-inositol material has to be checked in the novel-food status catalogue and the Union list, and the buyer's regulatory team confirms the member-state route and the finished product. This page does not state that the ingredient is authorised, notified or listed in any market. Save the entry that covers the material, with its specification and conditions, in the file. Contaminants fall under Commission Regulation (EU) 2023/915, and the limits apply to the product as sold, which means the calculation starts from the finished daily dose rather than from the drum. ## United States In the US, the file has to show how D-chiro-inositol is positioned as a dietary ingredient and why the intended use fits that position. A dietary ingredient with a marketing history before 15 October 1994 can rest on that history; without it, a new dietary ingredient notification under 21 CFR 190.6 is the route, and the supplier names the basis it relies on. The buyer then checks that the basis covers the finished product, the dose and the label. Manufacture sits under the dietary supplement cGMP in 21 CFR 111, the Supplement Facts panel under 21 CFR 101.36, and structure/function statements under 21 CFR 101.93 with the disclaimer. None of these is settled by the certificate or the specification. ## Contaminants and the finished dose A drum result is not yet a compliance answer. The market limit applies to what is sold, so the metal figures have to be carried through the serving size and expressed as an intake. The table gives the reference values normally used for a supplement file; the text in force in the destination, read with the daily dose, sets the figure. Reference contaminant values for a supplement file | Parameter | Reference value | Evidence to attach | Lead | 3.0 mg/kg in the supplement | Lot figure, method, limit and dose calculation | Cadmium | 1.0 mg/kg in the supplement | Lot figure and any category exception | Mercury | 0.10 mg/kg in the supplement | Lot figure and method | Arsenic | Agreed market limit | Agreed limit and the method that produced it Carry each result through the dose: a mg/kg figure becomes a daily intake in micrograms once the serving is applied, and that is what the limit is checked against. A plant-derived lot also deserves a look at the elements its extraction route can concentrate. ## The label and the claim Name the isomer on the label. “Inositol” does not declare D-chiro-inositol, and a 40:1 product needs both names and both quantities. In the EU, inositol has no reference intake, so no percentage NRV appears; in the US, the panel carries “Daily Value not established”. Claims are reviewed separately from the certificate. An EU health claim needs authorisation under Regulation (EC) No 1924/2006, and a US structure/function statement needs substantiation and the DSHEA disclaimer. Wording about a metabolic or hormonal effect belongs to a health area, not to a permitted food claim, and this site makes no such statement. A front-of-pack “40:1” is a ratio statement, not a claim, and it does not replace the ingredient list. No disease-related claim is open in either market. ## Documents for the D-chiro file The certificate should carry the D-chiro assay and its method, the myo-inositol result from a resolving run, moisture, optical rotation, the metal panel, the microbial count and the particle size. The specification should name D-chiro-inositol, CAS 643-12-9 and the source. Add the technical data sheet, the safety data sheet, the source and process description, allergen and GMO statements, the residual-solvent statement and the origin record. For a plant-derived material, add the plant part and the extraction solvent, and name any other cyclitol the route can carry. The COA page shows where each result belongs; the identity page covers the isomer evidence; the EU regulatory notes hold the framework references. ## Checks before the first order - The specification version, CAS number and isomer are named. - The novel-food or dietary-ingredient route is confirmed for the destination and recorded. - COA, TDS, SDS, source, allergen, GMO, origin and residual-solvent statements are in the file. - The metal results have been converted to the finished daily dose. - The label names the isomer and the quantity, and the claim wording has been reviewed. - Source, process and pack sit under change control. The product page carries the catalog specification, and the quality page describes the release file. ### 06 How we prove a lot is D-chiro-inositol, not myo URL: https://nutrition.rainwoodbio.com/products/vitamins/d-chiro-inositol/identity/ Reviewed: 2026-11-20 D-chiro-inositol and myo-inositol are built from the same atoms and weigh the same, so no single number on a certificate separates them. Identity comes from several agreeing measurements: a chiral signal, a chromatographic separation that reports each isomer, a crystal pattern that confirms the solid, and a mass balance that accounts for the remainder. A total-inositol assay answers none of those on its own. In one lineIdentity here is the isomer, and the isomer needs more than a percentage: rotation for chirality, a resolving separation for the two peaks, and a mass balance for everything else. ## Five checks that have to agree Each check below answers a different question, and each can fail while the others pass. A supplier who has only the first has described a document, not a drum. Checks for a D-chiro-inositol lot | Check | Question | Method | What it establishes | Name and CAS | Is the isomer specified? | Name, CAS 643-12-9 | Paperwork only | Chirality | Is the material optically active? | Polarimetry | A chiral cyclitol, not myo | Separation | How much of each isomer? | Resolving HPLC | D-chiro and myo values | Solid form | Which crystal is present? | X-ray diffraction | The phase, not the enantiomer | Balance | What else is in the drum? | Assay, moisture, metals, source | Consistency of the numbers ## The isomer ratio, not a counter-ion Myo-inositol has a plane of symmetry and is optically inactive; D-chiro-inositol does not, so its solutions rotate plane-polarised light. That is the first independent check. A powder that passes a summed inositol assay but shows no rotation has not shown the D-chiro isomer, however white and crystalline it looks. The assay must report the two isomers as separate results. One inositol peak gives the sum, and the sum cannot tell a pure D-chiro lot from a blend. The resolving method needs a standard for each isomer, a demonstrated resolution and a stated detection limit; a spiked sample is the simplest proof that the separation works. With two results in hand, the ratio is calculated from both and never by subtracting one from a total. A 40:1 formula is forty parts myo to one part D-chiro by weight, and because the masses are equal the molar ratio is the same. In a 4,100 mg total that is 4,000 mg myo plus 100 mg D-chiro, so the D form is 2.44% of the inositol mass. Polarimetry is a screen rather than a complete chiral assay. It separates the D form from the L form by sign, and a racemate is inactive like myo, so a disputed chirality question needs chiral chromatography or NMR with a chiral shift reagent to close it. ## What diffraction can and cannot prove X-ray diffraction reads the packing of the solid. It shows whether the lot is crystalline, whether the pattern matches a reference, and whether a second crystalline phase is present above the method's detection limit. It does not measure the isomer ratio and it is not a purity assay. There is a blind spot worth knowing. D-chiro and L-chiro are mirror images, and their crystals are mirror lattices that give the same powder pattern under ordinary laboratory conditions. Diffraction can therefore confirm the crystal form and expose a myo phase, but it cannot say which chiro enantiomer was weighed. Chirality has to come from rotation or a chiral separation. Request the reference diffractogram and the limit of detection before accepting a match. A report that says “XRD conforms” without either has added very little. The technique is strongest when the question is solid form, crystallinity or a second phase, and when it is read beside the resolving assay and the rotation. ## How substitution shows up Signals of substitution in a D-chiro-inositol lot | Substitute | Why it can pass a quick look | What gives it away | Confirming test | Myo-inositol | Same formula, colour and solubility | A myo peak; no optical activity | Resolving HPLC with polarimetry | 40:1 blend sold as D-chiro | White powder at the same mesh | D-chiro value far below the label | Resolving HPLC, two standards | Another cyclitol, such as pinitol | Plant-extract origin; similar behaviour | An extra peak; source does not match | LC-MS and NMR | Maltodextrin or a sugar | Dilutes without changing appearance | Assay low; moisture or ash shifts | Mass balance | L-chiro or a racemate | Same formula and the same diffraction pattern | Rotation reduced or reversed | Polarimetry, chiral separation Appearance is the weakest signal of all: both isomers are white to off-white and a blend can be milled to the same fineness. The strong signals are the separate isomer values, the rotation and the mass balance. A certificate that reports only appearance and a summed inositol figure has left the likeliest substitution untested. ## Writing identity into the specification - “D-chiro-inositol, CAS 643-12-9, C6H12O6; source declared.” - “Assay ≥98.0% by an isomer-resolving HPLC method; column, mobile phase, detector and standard named.” - “Myo-inositol ceiling agreed per order and reported as a separate value.” - “Loss on drying ≤0.5%; melting point 225–230 °C; optical rotation reported.” - “Identification by HPLC retention and infrared spectrum; diffraction available on request.” - “Particle size ≥95% through 80 mesh; metals and microbiology as listed.” ## Five questions worth asking - Which isomer is this lot, and what CAS number appears on the certificate? - How was the separation done, and what myo-inositol value did it return? - What rotation was measured, and against which reference? - What is the source, and which other cyclitols can that route bring through? - Would you accept a joint re-test of the retained sample if we disagree about the isomer? Direct answers to those five make an identity file; an assay percentage alone does not. The catalog entry is on the D-chiro-inositol page. The COA page places each result in its row; the level-four comparison follows through to the label; the methods section describes the separation; and the quality page covers release. ### 01 Reading a glucosamine sulfate COA, line by line URL: https://nutrition.rainwoodbio.com/products/specialty/glucosamine-sulfate/coa/ Reviewed: 2026-11-20 The certificate for a glucosamine sulfate 2KCl lot reports appearance, identification by HPLC and sulfate, assay by HPLC, sulfate by titration, loss on drying, the heavy-metal panel, microbiology and particle size. The assay and the sulfate figure are read together: one counts the amino sugar, the other counts the counter-ion. A certificate that reports only the assay has not shown which salt the lot contains. The limits below are catalog values; the batch certificate confirms a particular pack. In one lineThe assay and the sulfate figure are two halves of one identity: the HPLC counts glucosamine, the titration counts sulfate, and a useful certificate reports both against their limits. ## The certificate as a test report An auditable certificate gives every row the same three columns: the parameter, the analytical method behind the number, and the limit the lot had to satisfy. “Conforms” on its own is a verdict; it does not show what the laboratory measured. The identification line establishes the 2KCl sulfate complex, the assay line fixes the glucosamine content, and the sulfate line fixes the counter-ion and its stoichiometry. A certificate that rolls those three into a single percentage has removed the evidence that separates this salt from glucosamine hydrochloride. Identity, assay, sulfate and contaminants · glucosamine sulfate 2KCl | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | HPLC retention and sulfate reaction | Conforms to the reference | Assay | HPLC | 98.0–102.0% | Sulfate | Titration | 15.0–17.0% | Loss on drying | Gravimetric | ≤1.0% | Heavy metals (Pb, As, Cd, Hg) | ICP-MS, one result per element | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology (APC, yeast/mould, pathogens) | Plate count; absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size (80 mesh) | Sieve analysis | ≥95% through 80 mesh ## The assay basis and the sulfate basis Glucosamine sulfate is a 2:1 salt: two glucosamine molecules to one sulfate, and the commercial solid adds two potassium chloride units. The formula mass of the complex is about 605.5, and sulfate is 15.9% of that mass at full stoichiometry. The catalog range of 15.0–17.0% is built around that figure. A result near the middle is consistent with the complex; a result near an edge should be read with the assay beside it. The assay is reported against a glucosamine standard, and the certificate should say whether the result is calculated on the dried basis or on the powder as received. With loss on drying limited to ≤1.0%, the difference is at most about one percentage point, but it still changes the number. A 100.0% result as-is at 0.8% moisture is 100.8% on the dried basis; the two descriptions are not interchangeable. Ask whether the sample was hydrolysed before the assay: a method that measures glucosamine after hydrolysis and one that measures the intact salt against a sulfate standard do not report the same number, even when both are called HPLC. The method line should name the standard and the basis, and the sulfate result should carry its basis too. ## Release limit versus batch result On the certificate, the limit is the boundary and the result is the measurement. Keep them in separate columns and put the method beside them. If the result column simply repeats the specification range, the reader has been given the gate again, not the lot. What the result column should contain | Parameter | Release limit | Result column | Assay | 98.0–102.0% by HPLC | Measured glucosamine, with standard and dried/as-is basis | Sulfate | 15.0–17.0% by titration | Measured sulfate, with titrant and calculation | Loss on drying | ≤1.0% | Measured moisture and oven temperature | Heavy metals (Pb, As, Cd, Hg) | Four elements, each with its own limit | One ICP-MS result per element, in mg/kg | Microbiology (APC, yeast/mould, pathogens) | Counts plus absence tests | Plate count, yeast/mould count and absence findings | Particle size (80 mesh) | ≥95% through 80 mesh | Measured percentage passing the sieve “Passes specification” is a conclusion, not a measurement; the reader should be able to rebuild it from the figures. Microbiology needs a count and an absence statement, and heavy metals need a figure per element rather than a single total. ## What moves between batches Between lots the sulfate figure, the assay, the loss on drying, the colour and the particle-size result move. The first two should move together. If the complex is consistent, a glucosamine assay near the top of the range comes with a sulfate figure close to 15.9%, not with a sulfate figure at 13%. A lot that reports 101% assay and 13.5% sulfate is not a slightly better version of the same powder; it is a different composition, and the chloride line would show whether the hydrochloride has entered the lot. Potassium and chloride are not on the catalog specification, but they are the second half of the 2KCl story. The complex carries about 12.9% potassium and 11.7% chloride, or about 24.6% potassium chloride. A potassium result well below that figure points to the sodium form or a dilution; a potassium result above it points to added potassium salt. Request both when the source or the form is new. Colour is a weak signal. White to off-white covers a range, and a slightly cream batch is not necessarily out of specification; a yellow or brown cast suggests moisture, heat or a reducing sugar has acted on the powder, so read it with loss on drying and the storage record. The 80 mesh result is a finishing line: it can change with the mill or sieve without any change in the chemistry. ## When to order an outside test Order an independent test for a new source, a first shipment into a market where the allergen file matters, a form claim the supplier's certificate does not prove, or a disputed result. The panel is HPLC with the glucosamine standard and the stated basis, sulfate by titration, potassium by ICP-OES and chloride by titration, ICP-MS for the metal panel, microbiology and a sieve check. Add XRD or FTIR if the solid form is in question. Require a detection limit for every screen; a “not detected” entry without one describes the method, not the sample. Chain of custody still matters: the sample tested should be the retained sample, and the report should carry the lot code from the pouch or drum. If a result is disputed, hand the referee the retained sample, the supplier's certificate and the specification, and ask for the tests that separate the forms rather than another run of the same assay. The analytical methods library describes the tests. ## What to compare between suppliers Put seven lines side by side: form and CAS number; assay result and basis; sulfate result and method; potassium and chloride; loss on drying; heavy metals and microbiology; source and allergen statement. Two quotations that agree on assay but differ on sulfate or on source are not describing the same powder. The catalog specification is on the glucosamine sulfate product page. The tests that separate the complex from the hydrochloride are on the identity page; the salt comparison is on the grades page; the HPLC method is described in the HPLC method note; the release workflow is on the quality page. ### 02 Glucosamine sulfate 2KCl, 2NaCl or HCl: choosing the salt URL: https://nutrition.rainwoodbio.com/products/specialty/glucosamine-sulfate/grades/ Reviewed: 2026-11-20 Glucosamine sulfate is sold as the 2:1 sulfate stabilised with two potassium chloride units (2KCl) or two sodium chloride units (2NaCl); the catalog grade here is the 2KCl complex, CAS 14999-43-0. The hydrochloride is a separate product with its own CAS number, assay basis and label name. The choice changes the glucosamine base per gram, the mineral load and the ingredient name, not only the word printed on the certificate. In one lineThe sulfate form is not one powder: the 2KCl complex, the 2NaCl complex and the hydrochloride carry different masses of glucosamine per gram and different label names. ## Why the sulfate is sold as a complex Glucosamine is an amino sugar, C6H13NO5, with a formula mass of 179.17. The bare 2:1 sulfate is a hygroscopic solid that is difficult to pack and keep as a free-flowing powder, so the commercial answer is to crystallise it with an alkali chloride. Two potassium chloride units give the 2KCl complex; two sodium chloride units give the 2NaCl complex. The counter-ion is part of the solid, not a coating and not an impurity. The catalog grade is the 2KCl complex: (C6H13NO5)2·H2SO4·2KCl, CAS 14999-43-0, formula mass about 605.5 for two glucosamine units. Potassium chloride is about a quarter of that mass. That is why the glucosamine share per gram is lower than the hydrochloride's, and why a switch between the forms is a mass change as well as a name change. ## The forms side by side Glucosamine salts compared per glucosamine unit | Form | Formula mass | Glucosamine base | Sulfate | Counter-ion | Label name | Hydrochloride | 215.63 | 83.1% | None | Chloride, 16.4% | Glucosamine hydrochloride | Sulfate 2KCl | 302.8 | 59.2% | 15.9% | Potassium 12.9%, chloride 11.7% | Glucosamine sulfate 2KCl | Sulfate 2NaCl | 286.7 | 62.5% | 16.8% | Sodium 8.0%, chloride 12.4% | Glucosamine sulfate 2NaCl | Sulfate, bare 2:1 | 228.2 | 78.5% | 21.1% | None | Glucosamine sulfate The formula masses are given per glucosamine unit so that the column compares like with like. The 2KCl row is the catalog grade; the other rows are contexts for a switch, not stock items. A purchase order that says “glucosamine sulfate” without the counter-ion has not fixed the formula mass, and the mass per serving can move by 40%. ## Solubility, moisture and particle size The catalog material is a white to off-white, free-flowing powder: ≥95% through 80 mesh. It dissolves freely in water, and the solution is acidic. The potassium chloride goes into solution with the complex. Solubility is not the reason to choose the sulfate over the hydrochloride, because both forms dissolve; the reason is the label, the customer specification or the mineral load. Hygroscopicity is the handling issue. The powder picks up moisture when the pouch is open. The loss on drying limit is ≤1.0%, and a powder left in a humid room will move toward that limit and past it. Keep the pack sealed, let a cold pack equilibrate before opening, and do not leave a scoop in the drum. The 2KCl complex is the form supplied as a food-grade powder; the bare sulfate is not the usual commercial solid. Particle size is a finishing choice. The catalog is 80 mesh, and granulated material is available on request. A coarser granule flows better and makes less dust, but it dissolves more slowly and changes the mouthfeel of a stick pack. The sieve result belongs in the specification, not in the packing note. ## Dose arithmetic and the label A label declares the salt; a formula weighs the salt; the glucosamine base is the bridge between them. One gram of the 2KCl complex carries about 592 mg of glucosamine base, and one gram of the hydrochloride carries about 831 mg. A 1,500 mg label of the 2KCl complex therefore declares about 888 mg of base, while the same label weight of hydrochloride declares about 1,246 mg. Glucosamine base by form | Form | Base per gram | Base in a 1,500 mg weigh-in | Complex needed for 1,500 mg base | Hydrochloride | 831 mg | 1,246 mg | 1,805 mg | Sulfate 2KCl | 592 mg | 888 mg | 2,535 mg | Sulfate 2NaCl | 625 mg | 938 mg | 2,400 mg | Sulfate, bare 2:1 | 785 mg | 1,178 mg | 1,911 mg The mineral figure follows the same arithmetic. A 1,500 mg weigh-in of the 2KCl complex carries about 194 mg of potassium; the same weight of the 2NaCl complex carries about 120 mg of sodium. In the United States, sodium and potassium are declared in the Supplement Facts panel when they are present at a declarable level. In the EU they belong in the nutrition declaration where one is given. A capsule built on the 2KCl complex also needs about 40% more mass than the hydrochloride for the same base, which changes the fill weight and sometimes the capsule count. These figures are label arithmetic, not dose recommendations. The finished product's intake and its regulatory position are separate decisions. ## What to write into the specification - “Glucosamine sulfate 2KCl, CAS 14999-43-0, (C6H13NO5)2·H2SO4·2KCl.” - “Assay 98.0–102.0% by HPLC; state the basis on the certificate.” - “Sulfate 15.0–17.0% by titration.” - “Loss on drying ≤1.0%; particle size ≥95% through 80 mesh.” - “Potassium about 12.9% and chloride about 11.7%, where the counter-ion is to be confirmed analytically.” - “Source (shellfish or fermentation) and the matching allergen statement.” - “Heavy metals and microbiology as listed.” We supply the 2KCl complex. The 2NaCl complex and the bare sulfate are different specifications with different masses and label names; they should not be substituted at the balance without written change control. ## When another form is the better choice The hydrochloride is the better choice when the label can name it and the formula wants the most glucosamine base per gram with no potassium or sodium. It is also the simpler choice for a small capsule or a low-mineral formulation. The 2KCl complex is the choice when the label, the customer specification or the market file calls for the sulfate form and the potassium load is acceptable. Do not switch in either direction without new artwork, a new specification and a fresh allergen check. The form is part of the ingredient identity, not a unit conversion applied at the weigh-up. The product hub carries the catalog specification; the level-four comparison works through the label arithmetic; the COA page shows where the sulfate line sits; the glucosamine hydrochloride page gives the other form's specification; the chondroitin sulfate page is the usual companion material. ### 02.1 Glucosamine sulfate vs glucosamine HCl: the counter-ion and the label URL: https://nutrition.rainwoodbio.com/products/specialty/glucosamine-sulfate/grades/glucosamine-sulfate-vs-glucosamine-hcl/ Reviewed: 2026-11-20 Glucosamine sulfate 2KCl and glucosamine hydrochloride are different salts of the same amino sugar. The 2KCl complex is about 59% glucosamine base and carries potassium and chloride; the hydrochloride is about 83% base and carries chloride only. A label that says “glucosamine” but not the form has not fixed the mass, the mineral load or the ingredient name. In one lineThe counter-ion decides the formula mass, the mineral load and the ingredient name, so a glucosamine sulfate label cannot be swapped for a hydrochloride label without new arithmetic and new artwork. ## Two counter-ions, two solids Glucosamine is the free base. The hydrochloride adds one hydrochloric acid unit, giving C6H14ClNO5 and a formula mass of 215.63. The sulfate is a 2:1 salt, two glucosamine molecules to one sulfate, and the commercial solid adds two potassium chloride units. The 2KCl complex has a formula mass of about 605.5 for two glucosamine units, or about 302.8 per unit. The counter-ions are not impurities: they are part of the formula mass and part of the label. Potassium chloride is about 24.6% of the complex by mass, of which potassium is 12.9% and chloride 11.7%. The hydrochloride is 16.4% chloride and no potassium or sodium. A sulfate made with sodium chloride instead carries about 8.0% sodium and no potassium. The counter-ion is the first thing to read on the certificate. The difference per glucosamine unit is about 40%. That single ratio sits behind every dose conversion in this comparison, and it does not move when the assay moves. ## The mass behind the label Glucosamine mass by salt form | Form | Formula mass per glucosamine unit | Base per gram | Base in 1,500 mg | Mass for 1,500 mg base | Hydrochloride | 215.63 | 831 mg | 1,246 mg | 1,805 mg | Sulfate 2KCl | 302.76 | 592 mg | 888 mg | 2,535 mg | Sulfate 2NaCl | 286.65 | 625 mg | 938 mg | 2,400 mg To deliver 1,500 mg of glucosamine base, the 2KCl complex needs about 2,535 mg and the hydrochloride about 1,805 mg. Going the other way, 1 g of the 2KCl complex is worth about 0.712 g of the hydrochloride for glucosamine content. The factors are fixed by the formula, not by the assay. The assay basis adds a second correction. The hydrochloride is assayed on the dried basis; the sulfate certificate should state its basis. At 0.8% moisture, a 100.0% dried-basis result is 99.2% as received, and the base figure moves with it. Apply the moisture correction before the salt factor, not after. ## What the sulfate figure proves The sulfate figure is the sulfate counter-ion, not a sulfur impurity and not a sulfite. At full stoichiometry it is 15.9% of the 2KCl complex, and the catalog range is 15.0–17.0%. The hydrochloride has no sulfate line; its salt evidence is chloride at 16.2–17.0%. A certificate that reports chloride and no sulfate is describing the hydrochloride, whatever the product name says. Read the sulfate and the assay together. A 100% assay with 15.9% sulfate is consistent with the complex. A 100% assay with 13% sulfate is not; the missing sulfate has to be replaced by something, and the chloride or potassium line will show what. A sulfate figure above 17% with a normal assay points to an added sulfate salt, which lifts the mineral load without lifting glucosamine. ## Solubility and the solution Both salts dissolve in water, and both give an acidic solution. Solubility is often given as the reason to choose the sulfate, but the practical difference is the mass that dissolves: a gram of the 2KCl complex brings about 592 mg of glucosamine base into solution, and a gram of the hydrochloride about 831 mg. For a stick pack or a drink mix, that changes the amount of powder per serving, not the clarity of the drink. The 2KCl complex is freely soluble, and the potassium chloride dissolves with it. A concentrated stock may need warming or pH adjustment; measure the pH at the concentration and temperature used in the formula. The solution is a better medium for browning than the dry powder, so a clear liquid is not automatically the more stable format. ## What the label has to say In the EU, the ingredient list names the form. “Glucosamine sulfate” without the counter-ion is ambiguous when the powder is the 2KCl complex, so write the complex out. The crustacean allergen is emphasised when the source is shrimp or crab shell, and potassium or sodium belongs in the nutrition declaration where one is given. A label written for the hydrochloride does not cover the sulfate complex. In the United States, the Supplement Facts panel names the dietary ingredient. “Glucosamine sulfate” and “glucosamine hydrochloride” are separate declarations. The 2KCl complex should carry its counter-ion in the name, and sodium or potassium is declared when present at a declarable level. The source statement and the allergen declaration sit with the panel, not only in the supplier's file. The label arithmetic follows the form. A 1,500 mg declaration of the 2KCl complex is about 888 mg of glucosamine base and about 194 mg of potassium; the same weight of hydrochloride is about 1,246 mg of base and no potassium. A panel that keeps the number and changes the form has changed the dose. ## When to choose which Choose the hydrochloride when the label can name it and the formula wants the most base per gram with no potassium or sodium, especially in a small capsule. Choose the 2KCl complex when the label, the customer specification or the market file calls for the sulfate form and the potassium load is acceptable. Choose the 2NaCl complex only when potassium is restricted and sodium is acceptable, and write that choice into the specification. A switch in either direction needs new artwork, a new specification, a new allergen check and a new label calculation. The product hub carries the catalog specification; the grades page places the comparison in the wider range; the COA page shows where the sulfate line sits; the glucosamine hydrochloride page gives the other specification; the compliance page covers the allergen and the market file. ### 03 Glucosamine sulfate stability: moisture, browning and the pack URL: https://nutrition.rainwoodbio.com/products/specialty/glucosamine-sulfate/stability/ Reviewed: 2026-11-20 Glucosamine sulfate 2KCl is hygroscopic and browns when moisture, heat and a reducing sugar meet. The sealed foil pouch or drum liner keeps it for the assigned retest period; an open container, a warm store or a sweetened blend shortens that period. Shelf life is assigned from stability data for the exact pack, not from the certificate. In one lineThe powder keeps when it stays dry and cool; moisture, heat and a reducing sugar in the blend are what turn it brown. ## The powder: moisture, heat and colour The catalog sets loss on drying at ≤1.0%. That limit is a release gate, not a storage allowance. Once the pouch is open, the powder can pick up moisture from the air: the as-is assay falls, the powder cakes, and the colour can move. The potassium chloride in the complex is not the moisture source; the glucosamine and the physical form are. Keep the original pack closed. A 1 kg pouch that has been opened and folded over is not resealed in the same sense as a heat-sealed pack, and the headspace now holds humid air. Transfer the remainder to a smaller opaque container, or use it within the stated in-use period. A desiccant can help in a humid room, but it is not a substitute for a seal. Light is a secondary concern for this powder compared with moisture and heat. A clear jar on a bench is still a poor container: it lets the powder exchange moisture and shows every colour change without protecting against it. The store should be dry, cool and out of direct sun, and a cold pack should be allowed to equilibrate before it is opened so that condensation does not form on the powder. ## The solution: a different risk The 2KCl complex dissolves freely and gives an acidic solution. In solution the amino group is available for browning reactions, and heat and pH move the rate. A ready-to-drink process adds a pasteurisation or hot-fill step that the dry powder never sees; a stick pack avoids that step because the consumer adds water at the point of use. pH is the formulation variable. An acidic matrix slows browning compared with a neutral or alkaline one, but it also changes taste and the stability of the other ingredients. Measure the solution at the formula pH and hold time, not at the pH of a plain water solution. A clear liquid is not automatically the more stable format. If a liquid is unavoidable, protect it from light, control the pH, keep dissolved oxygen low and validate the hold time before filling. A bulk-powder result does not transfer to a beverage; the matrix, the process and the pack each change the rate. ## What drives the change Factors that move glucosamine sulfate 2KCl during storage | Factor | What it does | Control | Moisture | Raises loss on drying, lowers the as-is assay, causes caking | Sealed pouch; dry store; desiccant where needed | Heat | Accelerates moisture pickup and browning | Controlled store; cool process | Reducing sugar | Reacts with the amino sugar and browns the blend | Choose excipients and flavours with the reaction in mind | pH in solution | Moves the browning rate and the taste | Validate the matrix pH and the hold time | Metal ions | Iron and copper can catalyse browning | Avoid contact with iron and copper | Time | All of the above accumulate | Assign the retest period from data These factors are not independent. A warm, humid store is worse than the sum of two separate effects, and a sweetened stick pack stored in a warm room combines moisture, heat and a reducing sugar in one sachet. The useful question is not whether glucosamine sulfate is stable in general, but whether the chosen pack holds it at the stated condition for the stated time. ## A stability protocol for the ingredient A protocol names the pack, the condition, the time points and the tests. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% relative humidity model the warehouse; 40 °C/75% relative humidity stresses the pack. An optional light arm is cheap insurance for a clear pack. Test assay, sulfate, loss on drying, appearance, microbiology and, for a liquid, pH at each point. The report should show the individual results, not only a pass statement, and it should identify the pack and the lot family. A result table with one “conforms” column has not recorded a trend. Request the stability summary for the pack you will actually buy. A 25 kg drum and a 1 kg pouch differ in headspace and opening history, so the data belongs to the pack. ## The finished formula changes the answer A capsule or tablet starts with low water activity, but the excipients can still move moisture into the fill. Lactose, dextrose and some maltodextrins bring a reducing sugar, and wet granulation adds water and heat. A direct-compression blend with a non-reducing filler is a different stability question from a wet-granulated one with lactose. Check loss on drying and appearance after storage, not only at release. A stick pack fails at the seal: a pinhole in the foil is enough, and the strip is inspected as well as the powder. A flavoured stick with a reducing sugar and an acidic acidulant is a Maillard system, even when the powder itself is dry. A beverage combines heat, pH, oxygen and light, and the ingredient's bulk stability is the starting point, not the answer. ## How the shelf life is set We do not publish one shelf-life figure for glucosamine sulfate 2KCl, because the pack and the storage condition decide it. The retest period on the specification is supported by the stability file for that pack. A number without a pack, a condition and a test panel is a claim, not a shelf life. At the end of the retest period, re-assay the retained sample before extending use. An assumption is not an extension, and a bulk figure does not transfer to a repacked container. Pack sizes are on the product hub; the release tests are on the COA page; pack and lead time are on the MOQ page; the HPLC note covers the assay; the quality page describes the release workflow. ### 04 Glucosamine sulfate: MOQ, packs and what a quotation needs URL: https://nutrition.rainwoodbio.com/products/specialty/glucosamine-sulfate/moq/ Reviewed: 2026-11-20 The MOQ is 1 kg, supplied as a 1 kg foil pouch; the production pack is a 25 kg fiber drum. Lead time is 1–7 days for the standard pack. A firm quotation needs the form and CAS number, the source, the quantity and pack, the destination and Incoterm, the documents and the intended market. In one lineOne kilogram is the qualification pack, the 25 kg drum is the production pack, and the quotation is built from the form, the source and the destination. ## Why the minimum is 1 kg A 1 kg pack covers a bench trial, a retained sample and an independent identity test, and it is small enough to ship as a parcel. It is also a lot with a code, not a scoop from a drum. That distinction matters more for this material than for a stable mineral salt, because the sulfate figure and the moisture have to be checked on the same pack that is being qualified. Anything below 1 kg is normally taken from a larger lot and repacked. That split adds handling and weakens the link between the powder and the original pack, even though the chemistry does not change. The 25 kg drum reduces handling per kilogram but ties up inventory for longer. The minimum is a pack decision, not a volume incentive. ## Packs and formats Standard glucosamine sulfate 2KCl packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Light and moisture barrier; transfer after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Particle profile changes | Custom split | On request | Bench trial below 1 kg | Repack record and its own lot code The catalog form is 80 mesh: ≥95% through 80 mesh. Granulation changes the specification, not just the packing: it moves the particle-size line and can move the lead time. Say so before the quotation if the dosage form needs a coarser or freer-flowing powder. ## Lead time and dispatch The standard pack is quoted at 1–7 days after order confirmation. Picking, document preparation and dispatch sit inside that window; transit, customs clearance and the customer's own quality release do not. A custom granulation or a non-standard pack adds time, and the quotation should state it separately. Ask for the dispatch date, not only the 1–7 day range. A 1 kg pouch normally moves as a parcel; the 25 kg drum goes on a pallet, and the Incoterm decides who books the freight and clears entry. The lot documents should travel with the pack, not follow it. ## What a quotation needs Six items make a quotation firm enough to compare: - Product and form. Glucosamine sulfate 2KCl, CAS 14999-43-0, counter-ion written out. - Specification. Assay and basis, sulfate, moisture, mesh, metals and microbiology. - Quantity and pack. 1 kg pouch, 25 kg drum, granulated or split. - Destination and Incoterm. Country, port or address, and trade term. - Documents. COA, specification, SDS, source and allergen statements, market-specific papers. - Intended use and market. Supplement, food or another use, and the selling market. A quotation without the source and the form is incomplete. The same powder can suit one destination and sit outside the file for another, and the allergen statement depends on the source. Commercial terms are stated on the quotation, not on this page. ## The sample is a lot, not a demonstration The 1 kg pack is the qualification sample. Before scaling, test identity, assay, sulfate, loss on drying and microbiology, and keep a retained sample from the same pack. The lot code on the sample, the COA and the quotation should agree; a sample with no lot trace is a demonstration, not a qualification. A trial that needs less than a kilogram is a repack, not the catalog pouch. It comes out of a bulk lot, carries its own handling record and cannot be presented as the 1 kg foil pack. Ask for the split in writing and keep the split lot code with the trial results, because the bench powder and the production drum may come from different lots even when both meet the same specification. ## Terms to settle before the first order The quotation should put commercial and quality terms on one page: Incoterm, pack size, dispatch window, specification revision, a COA per lot, the retained sample, the retest period and the change route. Agree those in a quality agreement before the first production order; after a dispute, the same conversation is harder. When a lot fails the agreed specification, the evidence is the retained sample and a joint re-test against the named method; a photograph of the drum is not evidence. The quotation and the quality agreement should say in advance who pays for the referee laboratory and which laboratory both sides accept. Appearance alone is a weak basis for a return. The product hub carries the catalog specification; the COA page lists the release tests; the compliance page covers the source and allergen file; the MOQ glossary entry defines the term; the logistics page covers shipping and documents. ### 05 The regulatory file for glucosamine sulfate 2KCl URL: https://nutrition.rainwoodbio.com/products/specialty/glucosamine-sulfate/compliance/ Reviewed: 2026-11-20 Glucosamine sulfate 2KCl is supplied as the potassium chloride complex, CAS 14999-43-0. The specification and the certificate describe the lot; the regulatory route, the allergen declaration and the label are decided by the destination and the finished product. The buyer's regulatory team confirms that route, and this page lists the documents and checks that belong in the file. In one lineThe specification describes the powder; the regulatory file shows the route, the allergen statement and the label for the destination. ## The layers of a market file Build the file from the material outwards. Start with the 2KCl specification, the CAS number, the manufacturing source and the revision that is being bought. Add the lot certificate and the retained sample. Then record the destination's route, contaminant limits and label rules. Finally, write down how a change of source, process or pack will be handled. We can supply the first two layers; the destination layer is the buyer's call, while the change layer needs both sides because a new source can rewrite the crustacean statement. Form and source belong in the file, not in a footnote. A dossier written around glucosamine hydrochloride does not cover the 2KCl complex, because the ingredient name, the counter-ion and the mass per serving change. A shellfish-derived lot carries a crustacean declaration that a fermentation-derived lot does not. Keep the form, the source and the specification revision together with dated documents. ## European Union Four instruments frame an EU food-supplement file: Regulation (EC) No 178/2002 for general food law, Directive 2002/46/EC for food supplements, Regulation (EU) No 1169/2011 for food information and Regulation (EC) No 1924/2006 for claims. Contaminants are governed by Commission Regulation (EU) 2023/915. Use the consolidated text in force rather than a trade summary. The food-supplements directive harmonises vitamins and minerals, and leaves other substances to national rules. Whether the destination permits this ingredient, and on which basis, is a determination for the buyer's regulatory team; this page does not assert a novel-food authorisation or a permitted list. If the status is in doubt, Regulation (EU) 2015/2283 is the framework to test. ## United States In the United States, a glucosamine sulfate product is usually positioned as a dietary supplement. The relevant definition is section 201(ff) of the Federal Food, Drug, and Cosmetic Act; manufacturing falls under 21 CFR Part 111, and the Supplement Facts panel under 21 CFR 101.36. A new dietary ingredient notification under 21 U.S.C. 350b may or may not apply, and the buyer's regulatory team makes that call; this page asserts neither a notification nor a pre-DSHEA status. The panel names the ingredient as sold, so the 2KCl complex should carry its counter-ion in the name. A shellfish-derived ingredient needs the US allergen declaration, and the source statement should sit with the material the brand relies on. Claims are reviewed apart from the certificate. ## Contaminants and the finished-dose calculation The catalog limits apply to the drum; a destination limit usually applies to the finished product. The file therefore has to show the arithmetic from the ingredient result to the daily dose. At 3 mg/kg, a 1,500 mg dose carries 4.5 µg of lead, while a 500 mg dose carries 1.5 µg. A lot that passes on the drum can still fail in the finished product at a high dose, and that gap is what the calculation is for. Contaminant references to confirm for the destination | Element | Reference level | What the finished-product file shows | Lead (Pb) | 3.0 mg/kg in the EU food supplement | Lot result, method and dose calculation | Cadmium (Cd) | 1.0 mg/kg, with category exceptions to check | Lot result and the exception relied on | Mercury (Hg) | 0.10 mg/kg in the EU food supplement | Lot result and method | Arsenic (As) | Buyer or market limit | Agreed figure and method, stated on the certificate US federal law does not set a general elemental ceiling for dietary supplements in the way the EU contaminant regulation does. The controlling figure is usually the buyer's specification, supported by the testing obligation in 21 CFR Part 111 and any state rule such as California's Proposition 65. For a US shipment, read the method and the reporting limit as carefully as the result, because the specification is what the release is measured against. ## Label names and claims On the EU side, a claim is usable only if it appears in the Register under Regulation (EC) No 1924/2006 and the product meets the conditions attached to that entry; the reviewer reads the entry, not a paraphrase. In the US, a structure/function statement must carry the DSHEA disclaimer, while a disease claim would move the product into a different category. The potassium or sodium that arrives with the counter-ion is a nutrition-declaration point, separate from both reviews. Nothing here is a label or a claim for the finished product. Artwork wording is signed off by the brand's reviewer for the form and the market; a certificate does not approve a claim. ## The shellfish allergen note The source decides the allergen statement. Glucosamine is made from crustacean shell, typically shrimp or crab, or by fermentation. A shellfish-derived lot falls under the crustacean entry in Regulation (EU) No 1169/2011 Annex II and under crustacean shellfish in the US FALCPA list. The declaration follows the source, not the assay. Purification lowers the protein, but allergen labelling is source-based; a low protein figure is not a reason to drop the declaration. The supplier's allergen statement should name the source, the line's cross-contact controls and any shared equipment. A fermentation-derived lot has no crustacean source, but the statement still belongs in the file. A sulfate is not a sulfite. The sulfate figure on the certificate is the counter-ion, and it is not a sulfite declaration. If a customer asks about sulfites, answer that question separately. ## Documents for the file - Lot certificate: methods, limits and results for assay, sulfate, loss on drying, metals and microbiology. - Specification and technical data sheet at the revision being bought. - Safety data sheet for handling and transport. - Source and origin statement: shellfish or fermentation, and country of origin. - Allergen declaration, with the crustacean statement where the source requires it. - GMO, residual-solvent and non-irradiation statements; halal or kosher certificates on request. - Stability summary and retest period for the pack being bought. ## Checklist before the first order - The order names the 2KCl complex, its CAS number and the manufacturing source. - The specification revision quoted on the order is the one on the certificate. - The allergen declaration reflects the source and appears on the artwork. - Elemental results are converted to the finished daily dose. - The buyer's regulatory team has signed off the destination route and label wording. - Change control covers a source switch, a process change and a new pack. The catalog specification is on the glucosamine sulfate product page; the lot tests are on the COA page; the analytical evidence is on the identity page; the salt comparison is on the grades page. The EU regulatory note and the US regulatory note give the framework references, and the quality page describes the release file. ### 06 How to prove a glucosamine sulfate 2KCl lot URL: https://nutrition.rainwoodbio.com/products/specialty/glucosamine-sulfate/identity/ Reviewed: 2026-11-20 A glucosamine sulfate 2KCl lot is the named complex when four lines agree: the document names the form and CAS number, HPLC shows glucosamine, titration shows 15.0–17.0% sulfate, and potassium and chloride are present in the proportion the complex requires. The assay alone cannot separate the 2KCl complex from the hydrochloride, the sodium form or a dilution. In one lineA sulfate lot is proven by three agreeing numbers: the glucosamine assay, the sulfate titration and the potassium or sodium that belongs to the counter-ion. ## The four identity layers Paperwork can name the right material without proving it. The four layers below ask separate questions, and each needs its own evidence; a supplier who answers only the first has described the label, not the powder. Four layers of glucosamine sulfate 2KCl identity | Layer | Question | Test | What it proves | Document | Is the form named? | Name, CAS number, formula | Paperwork only | Chromatography | Is the amino sugar glucosamine? | HPLC retention against a glucosamine standard | The molecule | Sulfate | Is the counter-ion sulfate? | Titration, 15.0–17.0% | The 2:1 salt | Counter-ion and balance | Is the solid the 2KCl complex? | Potassium by ICP-OES, chloride by titration, loss on drying | The complex and any dilution ## The sulfate ratio and the mass balance At full stoichiometry the 2KCl complex is 15.9% sulfate, 12.9% potassium and 11.7% chloride; the glucosamine base is 59.2%. The catalog sulfate range of 15.0–17.0% brackets the theoretical value, so the ratio is a direct check on the form rather than a generic purity figure. Read the sulfate against the assay. A 100% assay with 15.9% sulfate is consistent with the complex. A 100% assay with 13% sulfate is not; the missing sulfate has to be replaced by something. A high sulfate with a normal assay points to an added sulfate salt, which lifts the mineral load without lifting glucosamine. A high potassium with a low assay points to added potassium chloride. The numbers constrain one another, and that is the point of reporting all of them. The ratio also catches a blend that the assay cannot. A blend of the 2KCl complex and the hydrochloride can be adjusted to land inside the assay range, but its sulfate falls and its chloride rises. A blend with the sodium form shows sodium where potassium should be. The assay sees the amino sugar; the counter-ion sees the form. ## X-ray diffraction and the solid state X-ray diffraction answers a different question: is the solid crystalline, and does its pattern match a reference? The 2KCl complex is a crystalline solid, and a dilution with an amorphous carrier changes the pattern. The method can compare lots from two sources and can distinguish a crystalline complex from a spray-dried solid or an amorphous carrier blend. Potassium chloride is crystalline too, so strong alkali-halide lines beside a weak glucosamine pattern deserve a question. Before accepting a “match”, ask for the reference pattern and the detection limit. XRD is not a routine release test here, and “XRD conforms” without the pattern adds little. ## What adulteration looks like Common substitutions and the signals | Substitution | What it does | Signal | Test | Hydrochloride | Raises base per gram; no sulfate | Chloride high, sulfate low | Chloride and sulfate titration | Sodium form | Replaces potassium with sodium | Sodium present, potassium low | ICP-OES for potassium and sodium | Dilution | Lowers assay and sulfate together | Assay low, sulfate low, loss on drying may rise | Mass balance, loss on drying | Added sulfate or KCl | Lifts the sulfate or potassium line | Sulfate or potassium high with a normal assay | Sulfate, potassium and assay together | Moisture | Lowers the as-is assay | Loss on drying high; dried-basis assay normal | Loss on drying, both assay bases Colour is the weakest signal. White to off-white covers a range, and a yellow cast can come from moisture or heat rather than from a different material. The stronger signals are the sulfate, the potassium and the mass balance. ## How to write identity into the specification - “Glucosamine sulfate 2KCl, CAS 14999-43-0, (C6H13NO5)2·H2SO4·2KCl.” - “Assay 98.0–102.0% by HPLC; state the basis on the certificate.” - “Sulfate 15.0–17.0% by titration.” - “Loss on drying ≤1.0%; particle size ≥95% through 80 mesh.” - “Potassium about 12.9% and chloride about 11.7%, where the counter-ion is to be confirmed.” - “No hydrochloride substitution: the sulfate figure must stay within 15.0–17.0%.” - “Source (shellfish or fermentation) and the matching allergen statement.” ## Five questions for the supplier - Which salt form is this lot, and which CAS number is on the certificate? - Can you provide the HPLC chromatogram and the standard used, not only the assay percentage? - What is the sulfate result, and which titration method produced it? - What are the potassium and chloride results for this lot? - What is the source, and what allergen statement accompanies it? Five answers of this kind make an identity file; one assay percentage does not. The product hub carries the catalog specification; the COA page shows where each figure sits; the grades page compares the forms; the compliance page covers source and allergen; the HPLC note explains the separation. ### 01 What the COA for natural tocopherol actually contains URL: https://nutrition.rainwoodbio.com/products/vitamins/natural-tocopherol/coa/ Reviewed: 2026-11-20 A natural tocopherol certificate is read in four blocks: appearance and identity, the d-alpha-tocopherol assay, the peroxide value, and the contaminant and microbiology panels. Each line needs its method, its release limit and the measured result in separate columns, and the assay needs the isomer named beside it. The limits in the first table are catalog values; the lot certificate is what applies to the bottle in front of you. In one lineThe assay, the peroxide value and the isomer name belong on the same certificate, because a d-alpha percentage without the rotation and the oxidation state does not describe the oil. ## Reading the certificate line by line An auditable certificate gives, for every parameter, the test, the method and the limit the lot was released against. A line that reads only “conforms” offers a judgement with nothing behind it. Two rows carry the identity: identification asks whether the material is alpha-tocopherol, and the assay asks how much of the d isomer is present. Neither answers the question the word natural raises, which is the optical form. Identity, assay, oxidation and contaminants · natural tocopherol oil | Parameter | Method | Release limit | Appearance | Visual | Yellow to amber oil | Identification | HPLC retention and UV spectrum | Conforms to the reference | Assay, d-alpha-tocopherol | HPLC with UV detection | ≥90.0% | Peroxide value | Iodometric titration | ≤10.0 meq O₂/kg | Specific rotation | Polarimetry, solvent stated | Reported where agreed | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent The peroxide value is the row buyers skip and then regret: it measures the condition of the oil rather than its composition, and it moves first when a lot has been stored warm or in a half-empty bottle. ## The assay basis and the ways to express one result The oil is weighed as received, so the assay is an as-is figure and the certificate should say so. There is no drying step to divide out, and a result carried to an anhydrous basis would describe a material that is not in the bottle. A 90.0% result means 900 mg of d-alpha-tocopherol in a gram of oil. At 1.49 IU per milligram the same gram carries about 1,341 IU. The percentage, the milligram figure and the IU figure are three expressions of one measurement; when a specification quotes the percentage and a label quotes IU, the factor between them belongs in writing. The assay is not an alpha-tocopherol equivalent. The α-TE conversion is a labelling convention with a form-specific factor, and it is applied to the finished product rather than to the certificate. Nor is 90.0% a statement that the other tenth is inert: the remainder is other tocopherol homologues, a carrier oil or oxidation products, and a homologue profile is how that is settled. The same HPLC run gives the assay and the first half of the identity. The method should state the column, the mobile phase, the detection wavelength, the standard and the integration; if the natural claim is contested, ask for the chromatogram and the spectrum. ## Release limits and the result column A release limit is where a lot was accepted or rejected; the batch result is what the laboratory actually measured. Both belong on the page, with the method beside them. A column that copies the specification range has certified nothing. What the result column should contain | Parameter | Release limit | Result column | Assay, d-alpha-tocopherol | ≥90.0% | A measured percentage, with the method and the isomer named | Peroxide value | ≤10.0 meq O₂/kg | The measured value and the reference method | Specific rotation | Agreed at order | A measured figure with solvent and concentration | Heavy metals | Per element | A figure in mg/kg for each element, not a total | Microbiology | Counts and absence | The count and the absence statement for the lot Two lines need a number rather than a conclusion. The peroxide value needs the measured figure, because a result near the 10.0 limit leaves little room for storage. The specific rotation needs its measured value with conditions: it separates the natural d form from the synthetic dl material, and “conforms” cannot be checked. ## What varies from lot to lot The feedstock is a vegetable-oil deodorizer distillate, usually from soy, sunflower or rapeseed, and the concentration step that raises the alpha fraction is where the assay is set. A different feedstock changes the homologue profile and the source record; a different concentration step changes where inside the 90% range the lot lands. Peroxide value moves most between lots, since it depends on how old the distillate is, how much heat the concentration step applied, what headspace the holding tank had and how long the oil waited before filling. Colour follows it: yellow to amber is a wide window, and a darker, duller oil is a storage question before it is an identity failure. Specific rotation should not move. If it does, the question is what was blended in, not what the process did. Assay drift inside the range is normal; a step change in assay with a flat rotation points to a dilution, a step change in both to a different source. ## When an outside laboratory is needed An outside laboratory earns its fee on a new source, a first shipment, a natural claim the certificate does not back, or a disputed result. The panel worth ordering is narrower than the certificate: HPLC with the chromatogram and the UV spectrum, specific rotation or a chiral separation, the peroxide value and, if the file allows it, a p-anisidine value, a homologue profile, a residual-solvent screen for the extraction and concentration steps, the metal panel and microbiology. Insist on a stated limit of quantification for each screen, and on ISO/IEC 17025 accreditation for those tests. A “not detected” entry with no limit attached describes the method, not the oil. Keep the chain of custody: test the sample that was retained, and make sure the report names the lot and the pack. ## Comparing two quotations Six lines belong side by side: the isomer and the CAS number; the assay with its basis and the IU factor; the peroxide value at release; the optical rotation with its conditions; the homologue profile and the source record; and the pack with its lot code. Two quotations that agree on 90% but differ on the isomer or on the peroxide value are not describing the same oil. The catalog limits sit on the natural tocopherol product page, and the synthetic acetate is described on the vitamin E page. The tests that separate the natural form from the synthetic one are on the identity page; the effect of storage on the peroxide value is on the stability page; the HPLC method is described in the HPLC method note; release practice is on the quality page. ### 02 Natural tocopherol grades: the concentrate, the dilution and the powder URL: https://nutrition.rainwoodbio.com/products/vitamins/natural-tocopherol/grades/ Reviewed: 2026-11-20 Natural tocopherol is sold as an oil at different strengths, and this catalogue's grade is the ≥90.0% d-alpha-tocopherol concentrate: a yellow to amber oil, available as a powder on a carrier on request. The grade sets the IU per gram, the mass per dose and what the label can declare, so a percentage on its own is not a specification. The ester forms are separate products rather than stronger or weaker versions of this oil. In one lineThe grade is a concentration and a matrix decision: the same d-alpha-tocopherol at 90% and at 50% differs in the mass per dose and in the IU the label can carry. ## Why concentration is a weighing question A dose is written in IU or in milligrams of alpha-tocopherol equivalent, while the fill in a softgel or a blend is weighed in grams. The grade is what turns one unit into the other. Natural d-alpha-tocopherol carries 1.49 IU per milligram, so the concentrate at 90.0% is about 1,341 IU per gram, while a concentrate diluted to 67% reads about 1,000 IU per gram on the same arithmetic. The industry has standardised on those IU strengths, which is why a buyer sometimes asks for “1,000 IU natural vitamin E” and receives an oil that is about two-thirds tocopherol and one-third carrier. Both are legitimate products; they are not the same grade. The catalogue grade here is the concentrate, and a lower strength is a dilution, agreed as its own specification with its own carrier. The concentrate is produced by concentrating the alpha fraction of a vegetable-oil deodorizer distillate. That step, not the plant, is what sets the assay, the colour and the homologue profile. It also explains why the same supplier can offer 90%, 67% and 50% oils from one production line. ## The grades compared Natural tocopherol grades, their calculated potency and their matrix | Grade | Assay | IU per gram | Matrix | Label name | Concentrate, this grade | ≥90.0% d-alpha-tocopherol | ≥1,341, calculated | None; the oil itself | D-alpha-tocopherol | Diluted concentrate | About 67% | About 1,000, calculated | Carrier oil, declared | D-alpha-tocopherol | Diluted concentrate | About 50% | About 745, calculated | Carrier oil, declared | D-alpha-tocopherol | Powder on carrier, on request | Set by the oil load | Depends on the load | Carrier, declared | D-alpha-tocopherol, carrier named | Mixed tocopherols | Alpha, gamma and delta together | Not an alpha concentrate | Oil | Mixed tocopherols, homologues declared The IU column is calculated, not certified: assay multiplied by 1.49. Two oils can reach the same IU per gram from different assays, because one carries more carrier than the other, and the carrier is what the label has to declare. A buyer comparing percentages is comparing concentrations; a buyer comparing IU is comparing potency. ## Viscosity, density and handling The concentrate is a viscous oil with a density near 0.95 g/mL. It is insoluble in water and soluble in fats, in ethanol and in the usual organic solvents, which is why it suits a softgel fill, an oil blend and an emulsified system. At room temperature it pours slowly; a chilled warehouse can thicken it or set it, and the oil should be brought to room temperature and mixed before a sample is drawn. Warming is gentle and brief, not a hot plate left on. Colour is the practical read-out. Yellow to amber covers a fresh concentrate, and the oil darkens as it oxidises; a darker bottle is a storage question, not automatically a grade difference. Light matters more than a clear bottle suggests, so the amber pack is part of the material. The powder grade behaves differently: the oil sits on a carrier, the powder flows and disperses, and the carrier cuts the potency per gram by roughly half. It suits a tablet or a blend that cannot take an oil. The carrier, its source and its load belong in the specification, because the label has to name it. ## Dose arithmetic and the fill weight At 1.49 IU per milligram, a 30 IU dose is 20.1 mg of d-alpha-tocopherol, which is 22.4 mg of the 90% oil. A 400 IU dose is 268.5 mg of the alcohol, which is 298 mg of the oil before any overage. A 1,000 IU dose needs 745 mg of the oil, which is a large softgel fill and a reason to consider a different presentation rather than a larger capsule. A softgel fill has a volume limit as well as a mass limit, and at a density near 0.95 g/mL the oil is bulky. A tablet or a two-piece capsule takes the powder on carrier, where the dose is spread over more mass; a stick pack takes an emulsified or powdered form, because the neat oil does not disperse in water. The dosage form picks the grade, and the grade fixes the fill weight. The label declaration is a third arithmetic step. Natural d-alpha-tocopherol converts to alpha-tocopherol equivalent at a factor of 1.0, so the milligram figure is the declared figure; the IU figure on the specification is not the label unit. Keep the three numbers (assay, IU, mg α-TE) in one line of the specification so they cannot drift apart. ## The specification lines to agree - “D-alpha-tocopherol (natural), CAS 59-02-9, C29H50O2, oil.” - “Assay ≥90.0% d-alpha-tocopherol by HPLC, as-is; specific rotation reported with conditions.” - “Peroxide value ≤10.0 meq O₂/kg; appearance yellow to amber oil.” - “Heavy metals Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg; microbiology as listed.” - “IU factor 1.49 per mg for the d form; state the IU per gram calculated from the lot assay.” - “Carrier, its source and its load, if the grade is a powder or a dilution.” - “Pack, headspace and storage condition; source record for the feedstock.” ## When this oil is the wrong grade If the product is a dry powder that will sit in a warehouse for a year, the acetate is the more practical vitamin source: the ester protects the phenol and does not react with the matrix. If the label names the acetate, this oil is a different ingredient and not a substitution. If the formula wants gamma and delta as well as alpha, a mixed tocopherol is the product, and an alpha concentrate is the wrong one however high its assay. A clear beverage is also a case for a different form. The neat oil separates, so it needs an emulsified system or a water-dispersible powder, and the emulsion has to be studied in its own pack. The grade table answers the potency question; the dosage form answers the physical one. The catalog limits are on the natural tocopherol product page. The ester comparison is on the vitamin E page and, in detail, on the natural tocopherol versus tocopheryl acetate page; the certificate lines are on the COA page; the assay method is in the HPLC method note; release practice is on the quality page. ### 02.1 Natural tocopherol vs tocopheryl acetate: IU, stability and the label URL: https://nutrition.rainwoodbio.com/products/vitamins/natural-tocopherol/grades/natural-tocopherol-vs-tocopheryl-acetate/ Reviewed: 2026-11-20 Natural tocopherol and tocopheryl acetate are the same vitamin in two different chemical states: the natural material is d-alpha-tocopherol, the free alcohol, at 1.49 IU per milligram, and the synthetic material is dl-alpha-tocopheryl acetate, the ester, at 1.00 IU per milligram. At equal mass the natural alcohol carries about 49% more IU, while the acetate is the more storage-stable material and cannot act as an antioxidant in the formula. The two also carry different ingredient names, different conversion factors to alpha-tocopherol equivalent, and therefore different label lines. In one lineThe natural alcohol carries about 49% more IU per milligram than the synthetic acetate, while the acetate is the more stable form and the two carry different label names. ## An alcohol and an ester, not two strengths The vitamin carries a phenolic hydroxyl group. In the natural material that group is free, and the molecule is a single stereoisomer, RRR. In the synthetic acetate it is acetylated, and the material is all-rac: eight stereoisomers in equal amounts. Acetylation adds 42 g/mol, which is the gap between 430.71 and 472.74. D-alpha-tocopherol and DL-alpha-tocopheryl acetate | Property | D-alpha-tocopherol | DL-alpha-tocopheryl acetate | CAS number | 59-02-9 | 7695-91-2 | Formula | C29H50O2 | C31H52O3 | Molecular weight | 430.71 | 472.74 | Phenolic group | Free; the molecule is an antioxidant | Acetylated; not an antioxidant as supplied | Appearance | Yellow to amber oil | Clear, nearly colourless to pale yellow oil | Solubility | Insoluble in water; soluble in fats and organic solvents | Insoluble in water; soluble in fats and organic solvents | IU per milligram | 1.49 | 1.00 | Label name | D-alpha-tocopherol | DL-alpha-tocopheryl acetate Both are oils that need a carrier or an emulsion before they go into water, but only the alcohol can donate a hydrogen to a peroxyl radical. The ester is a vitamin source that waits to be hydrolysed; the alcohol is a vitamin source that also works as an antioxidant and is consumed doing it. ## IU per milligram: the arithmetic that changes the fill The IU factor follows the molecule, and no supplier's certificate changes it. The IU is defined on dl-alpha-tocopheryl acetate: one milligram equals 1 IU. The natural alcohol reaches 1.49 IU per milligram because it is a single stereoisomer, and the natural acetate 1.36 because the ester adds mass without activity. IU per milligram for the vitamin E forms, and the mass for 400 IU | Form | IU per mg | Mass for 400 IU | Alpha-tocopherol equivalent factor | D-alpha-tocopherol | 1.49 | 268.5 mg | 1.00 | DL-alpha-tocopherol | 1.10 | 363.6 mg | 0.74 | D-alpha-tocopheryl acetate | 1.36 | 294.1 mg | 0.91 | DL-alpha-tocopheryl acetate | 1.00 | 400.0 mg | 0.67 A 400 IU dose is therefore 268.5 mg of the natural alcohol and 400 mg of the synthetic acetate, a difference of about 131 mg in every capsule. At the catalogue's 90.0% assay, the natural oil weighs 298 mg for that dose. Swapping one for the other at equal mass moves the dose by about a third, and no certificate would reveal it, because each material passes its own specification. A percentage on its own says little about potency. A 50% synthetic acetate powder reads 500 IU per gram, while the 90% natural oil reads about 1,341 IU per gram: the same kind of number, a different meaning, because the assay refers to a different molecule and the carrier is not the same. ## Stability: the ester protects the vitamin, the alcohol protects the formula The free phenolic group makes the natural alcohol an antioxidant, and it also makes it the less stable of the two in storage. Light, oxygen and trace metals attack that group, the peroxide value rises, the oil darkens and the assay falls. The acetate has the group blocked, so it resists oxidation longer and does not scavenge radicals; in a dry matrix it is the more forgiving material. The advantage reverses inside a formula. In a softgel fill or an oil blend, the natural alcohol protects the partner oils and is consumed doing it, so its own label claim can drift down while the fill stays fresh. That is a formulation decision, not a defect: if the tocopherol is there to protect the oil, the label should carry the overage the stability data supports. If it is there only as a vitamin, the acetate holds its declared level more easily. The acetate does not escape hydrolysis: it takes on water slowly and cleaves to tocopherol and acetic acid, which is why a wet matrix is a poor home for it and a dry powder is a good one. Both materials need a sealed, dark, cool pack, and a retest period that belongs to the pack rather than to the molecule. ## What the label has to say In the EU, the form has to appear on the list of vitamin forms for food supplements, Annex II to Directive 2002/46/EC, and the ingredient list names the one in the drum; the buyer's regulatory team confirms the entry and the current text for the destination. Vitamin E is declared in mg alpha-tocopherol equivalent against a reference value of 12 mg, and the conversion factors differ: 1.0 for the natural alcohol and 0.67 for the synthetic acetate. In the United States the Supplement Facts panel declares vitamin E in mg of alpha-tocopherol against a Daily Value of 15 mg, with the source in the ingredient list: “Vitamin E (as d-alpha-tocopherol)” or “Vitamin E (as dl-alpha-tocopheryl acetate)”. In both markets the panel works in milligrams rather than IU, and the words vitamin E alone do not identify the ingredient. The word natural belongs to the d configuration and to the source record; the word vitamin does not carry it. A pack that says natural against a dl-acetate ingredient is a labelling problem even when the IU figure is right, and a natural designation needs the rotation and the feedstock record behind it. ## When to choose which Choose the natural alcohol when the product is a softgel, an oil blend or an emulsion; when the label names d-alpha-tocopherol; when the tocopherol has an antioxidant role in the formula as well as a vitamin role; and when the natural designation is part of the brief. It is the form this catalogue supplies, as an oil at ≥90.0%. The acetate fits a dry powder, a tablet or a water-dispersible grade held for a long time, where the tocopherol is only a vitamin source. Neither fits a clear aqueous solution: both are oils, so a clear drink needs an emulsified system or a water-dispersible powder, with the stability work done in the drink itself. A switch in either direction is a new ingredient: new specification, new IU arithmetic, new label line and a new stability file. The natural tocopherol hub carries the oil specification; the vitamin E page carries the synthetic acetate; the grades page places this comparison in the wider range; the COA page shows how the assay and the rotation are reported; the methods library covers the analytical detail; release practice is on the quality page. ### 03 Natural tocopherol is oxidation-sensitive; the bottle sets the shelf life URL: https://nutrition.rainwoodbio.com/products/vitamins/natural-tocopherol/stability/ Reviewed: 2026-11-20 Natural tocopherol is an oil with a free phenolic group, so it reacts with oxygen and is consumed while it protects whatever surrounds it. Three signals show the decline: the peroxide value rises first, the oil darkens, and the d-alpha assay falls as oxidation products accumulate. The sealed amber bottle, a small headspace and a cool dark store are what the shelf life rests on. In one lineThe oil fails by oxidation before it fails by assay, and the peroxide value, the colour and the sealed pack are the evidence that it has begun. ## The oil as supplied: headspace, light and the peroxide gate The catalog sets the peroxide value at or below 10.0 meq O₂/kg. That figure is a gate at release, not an allowance for storage: once the bottle is opened, the headspace is exchanged for air, and the value climbs from the first day. A bottle kept full ages more slowly than one that has been drawn down, because less surface meets less air. Light is the other exposure that matters. The phenolic group absorbs ultraviolet light, so a clear bottle on a lit shelf is an exposure the amber pack avoids. The oil should stay in its original amber bottle, closed, or be decanted into a smaller amber container that leaves little headspace. A transparent jar is convenient and wrong for this material. Warmth increases both rates. The release value assumes a temperature-controlled store; a hot loading bay or a shelf above a heater is a different material. The oil can also thicken or set in a cold store, which is reversible: bring it to room temperature and mix before weighing, so that the sample is representative and the peroxide value is measured on a homogeneous oil. ## Oil blends, emulsions and softgel fills Natural tocopherol is not water-soluble and is not supplied as an aqueous solution. What matters downstream is the oil blend, the oil-in-water emulsion and the softgel fill, and each one changes how fast the tocopherol is used up. In a blend of seed oils, it acts as the antioxidant and is consumed in proportion to the unsaturation of the partner oils; the more double bonds it protects, the faster its own assay falls. Emulsification breaks the oil into fine droplets and multiplies the surface at which oxygen, light and trace metals can reach it. The emulsifier, the energy of homogenisation, the pH and any metal contact matter more than the bulk oil's own stability. Alkaline conditions are hostile to the free phenol, and a system above neutral pH will consume the tocopherol faster than an acidic one. An emulsion that looks right on the bench can still fall short of its declared vitamin level in the pack. The ester is the alternative where the tocopherol is present as a vitamin rather than as an antioxidant. Tocopheryl acetate has its phenolic group blocked, so it does not scavenge radicals, and it does not protect the fill; it is simply a more storage-stable source of the vitamin until it is hydrolysed. Which role the formula needs decides which material is specified. ## The variables that set the rate What changes natural tocopherol during storage | Factor | Effect | Control | Oxygen | Raises the peroxide value; consumes the tocopherol | Low headspace; sealed bottle; nitrogen if specified | Light, especially UV | Accelerates oxidation and darkening | Amber glass; dark store; opaque secondary pack | Heat | Raises the rate of oxidation | Controlled store; short holds; cool process | Iron and copper | Catalyse oxidation at trace levels | Stainless steel or glass contact; avoid brass and rust | Alkali | Ionises the phenol and speeds oxidation | Keep emulsions at or below neutral pH where possible | Repeated opening | Replaces the headspace with air | Smaller bottles; decant into a full container The factors reinforce one another. A warm, bright store holding a part-used bottle is the hardest case, and no single control answers it. Stability here is a property of a pack and a climate, not of the molecule on its own. ## A stability protocol for this oil A protocol earns its name when it fixes the container, the climate, the sampling schedule and the tests. A common design uses 25 °C/60% relative humidity long term, 30 °C/65% relative humidity intermediate and 40 °C/75% relative humidity accelerated, with a light-exposure arm, because a dark incubator cannot reveal a photochemical failure. Measure the assay, the peroxide value, the appearance and colour, the identity by HPLC and UV, and the specific rotation at the first and last points. Add a p-anisidine value if the file needs a secondary-oxidation marker, and microbiology if the pack is opened in use. Each time point should appear as a number against its pack and lot family, rather than as one overall pass. Sampling belongs in the protocol as well: draw it after mixing, close it at once, and record how long it waited before the test. A bottle that has stood open on a bench is no longer the material that was released. ## The formula and the pack together A softgel shell slows oxygen and moisture without stopping them, and the seam is the weak point. Check the fill at release and again at the end of the study, and watch the shell for discolouration, sticking and leakage. An oil blend adds the question of the partner oils, and a powder on carrier adds the carrier's moisture and surface area, which exposes more oil to air. Whatever antioxidant the formula carries belongs in the specification: ascorbyl palmitate, rosemary extract or a mixed tocopherol system, named with its level and reflected on the label. An antioxidant slows a reaction that is under way; it cannot reverse it. Tocopherol added to an oil already at a high peroxide value will not bring the specification back. Settle the system before the study begins, not after a failing result. ## Where the retest period comes from No single shelf-life figure is published for natural tocopherol, since the bottle, the headspace and the storage condition set it. The retest period appears on the specification and rests on the stability file for the pack. A number offered without a pack, a climate and a test panel is an assertion, not a shelf life. Extension is earned, not assumed: at the end of the period, the retained sample goes back to the laboratory. A result on bulk oil says nothing about a repacked bottle, and a softgel's life is not the oil's. The lot, the production date and the retest date belong on the delivery papers, so the buyer can judge the remaining life when the pallet lands. The catalog limits are on the natural tocopherol product page; the release lines are on the COA page; the packs and lead time are on the MOQ page; the assay and the oxidation tests sit in the methods library; the release workflow is described on the quality page. ### 04 Natural tocopherol: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/vitamins/natural-tocopherol/moq/ Reviewed: 2026-11-20 The MOQ for natural tocopherol is 1 kg, supplied in an amber bottle; the standard larger pack is a 5 kg amber bottle, and a powder on carrier is quoted separately because it is a different specification. The standard pack ships in 1–7 days. A firm quotation needs the isomer and the IU basis, the quantity and the pack, the destination and the Incoterm, the documents, and the intended market. In one lineOne kilogram is the smallest order because it is the smallest amber bottle that can be filled, sampled and traced as a single lot. ## Why one kilogram is the minimum A single kilogram covers a bench trial, a retained sample and an outside check of the rotation or the peroxide value. It is also the smallest unit that can be filled from one lot, capped and labelled with a lot code, which is what makes traceability possible. Anything smaller comes out of a larger lot: more handling, a lost pack identity, and the same chemistry. The 5 kg bottle is the bulk unit for a pilot or a production run. It reduces the number of containers to handle and the glass to clean, and it lowers the headspace per kilogram only if it is kept full. Neither pack is a price signal; the minimum is set by the pack, and the quotation states the commercial terms separately. The oil is dense and viscous, so a litre is not a kilogram. A 1 kg bottle is about 1.05 L at a density near 0.95 g/mL, and a formulator who plans by volume should convert before ordering. ## Packs, sizes and closures Standard natural tocopherol packs | Pack | Net weight | Typical use | Notes | Amber glass bottle | 1 kg | Trial, qualification, retained sample | Light barrier; screw cap with a liner; keep full | Amber glass bottle | 5 kg | Pilot and production | Same barrier; decant into smaller bottles for use | Powder on carrier | Agreed at quotation | Tablet or dry blend | Different specification; carrier and assay declared | Split from a bulk lot | Below 1 kg | Bench work only | A repack with its own handling record, not the catalog bottle The amber glass is not decoration. The oil is light-sensitive, and the bottle is the barrier that keeps the peroxide value where it was at release. A clear container, or a bottle left open between weighings, shortens the useful life of the material whatever the certificate says. ## Lead time, dispatch and transit Allow one to seven days from order confirmation for a standard pack. The window covers picking, any repack, the documents and dispatch; transit, customs and the buyer's own release sit outside it. A powder on carrier or a non-standard pack adds time, and the quotation should say so separately. Get a dispatch date, not just a range. A single bottle travels as a parcel; a 5 kg bottle or a pallet of them needs cushioning and a freight decision, and the Incoterm decides who books it and who clears entry. Cold weather can solidify the oil in transit, which is reversible but should be expected on arrival: warm the bottle to room temperature and mix before sampling. Lot documents should arrive with the bottle, not weeks behind it. A bottle that arrives before its COA cannot be released to production, and the hold costs more than the documents. ## Six details a quotation needs A quotation can be compared only when it states all six: - Product and isomer. D-alpha-tocopherol, CAS 59-02-9, natural, oil, with the concentrate strength stated. - Specification. Assay and its basis, peroxide value, rotation, heavy metals and microbiology, plus the IU factor used. - Quantity and pack. 1 kg or 5 kg amber bottle, or a powder on carrier with its load. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, specification, SDS, and the source and allergen statements the importer needs. - Intended use and market. Supplement, food or another use, and the market where the finished product will be sold. A quotation that names “vitamin E oil” without the isomer and the assay basis is incomplete: the same words describe the natural alcohol, the synthetic dl material and an ester. The specification is part of the offer, not an attachment to it. ## A sample that carries a lot code The 1 kg bottle is the qualification sample. Before scaling, test the identity and rotation, the assay, the peroxide value and the microbiology, and retain a sample from that same bottle. The lot code should be the same on the sample, the COA and the quotation. A sample with no lot behind it is a demonstration, not a qualification. A trial below one kilogram is a repack drawn from a bulk lot, with its own handling record, and it is not the catalogued bottle. Get the split confirmed in writing, and keep its lot code with the trial data: the bench and the production bottle need not come from the same lot, even at the same specification. The peroxide value is worth measuring on arrival, not only at release. Transit heat and a long customs hold are exactly the conditions that move it, and a result taken before dispatch is a statement about a different moment. ## Terms to settle before ordering Commercial and quality terms belong on one page: Incoterm, pack, dispatch window, the agreed specification revision, a COA per lot, a retained sample from each lot, the retest period and a route for notifying a change. Get them into a quality agreement ahead of the first production order; the same discussion is far harder once a dispute exists. Change control deserves its own line, because this product can move in three ways without changing its name: the feedstock source, the carrier in a powder grade, and any antioxidant added to the oil. Each one can change the source statement, the allergen statement or the label. The agreement should say what is notified in advance and what is only reported after the fact. A lot that misses the agreed specification is settled on the retained sample and a joint re-test against the named method, not on photographs of the bottle. The agreement should also name the referee laboratory and who bears its cost. The product hub carries the catalog limits; the COA page lists the release tests; the stability page covers the storage conditions; the MOQ glossary entry defines the term; shipping is described on the logistics page and release on the quality page. ### 05 The regulatory file for natural tocopherol URL: https://nutrition.rainwoodbio.com/products/vitamins/natural-tocopherol/compliance/ Reviewed: 2026-11-20 A natural tocopherol file has four layers: the specification and lot certificate, the destination route for a vitamin E product, the label declaration and the claim review. The material is d-alpha-tocopherol, CAS 59-02-9, supplied as an oil; the isomer and the feedstock source belong in the file because the label and the allergen statement follow them. The buyer's regulatory team confirms the destination route, and this page names the framework, the documents and the checks that go in the folder. In one lineThe isomer, the source and the dose decide the route, the label and the allergen statement, and the buyer's regulatory team confirms all three for the destination. ## The four checks, and the two routes Four questions sit behind the file: is the substance usable in this category, what contaminant ceilings apply to the product as sold, how is the vitamin declared, and is the pack wording a claim or a description? A certificate answers none of them; it describes the lot, and the route is recorded beside it. One route question is specific to this material. A tocopherol added to an oil to slow oxidation is a food additive with its own entry and conditions; the same substance declared as vitamin E in a supplement is a nutrient, with a different instrument, label line and maximum. The two routes can meet in one product, and the file should say which role the tocopherol plays in each place. The framework here reflects the position at the time of writing. The current text decides, and one destination's route is not another's. ## European Union A food supplement in the EU is governed by Directive 2002/46/EC: Annex I fixes the vitamin E reference value at 12 mg alpha-tocopherol equivalent, and Annex II lists the vitamin forms the category draws on. The buyer's regulatory team confirms that the form, the source and the daily dose sit inside the current text, and that the member-state route is settled. Great Britain uses retained lists of its own while Northern Ireland stays inside the EU framework, so the delivery address decides which file applies. The antioxidant use has a separate home in Regulation (EC) No 1333/2008, which lists tocopherols with conditions on the food category and the level. A product can therefore carry a tocopherol doing antioxidant duty in one part of the formulation and declared as vitamin E in another; the two entries are checked separately. Regulation (EU) No 1169/2011 governs the label: the vitamin appears per portion as mg alpha-tocopherol equivalent and as a share of the 12 mg reference value, with the form named in the ingredient list. The form-specific conversion factor belongs in the label file, not in a spreadsheet that predates the current guidance. ## United States In the US, vitamin E is treated as a dietary ingredient, and the tocopherol here is the nutrient rather than an isolate. 21 CFR 111 supplies the cGMPs and 21 CFR 101.36 the Supplement Facts format; vitamin E is declared in mg of alpha-tocopherol against a 15 mg Daily Value, and the source goes into the ingredient list, for example “Vitamin E (as d-alpha-tocopherol)”. The buyer's regulatory team confirms the basis; no premarket notification is claimed by this page. No federal lead maximum applies to dietary supplements, yet lead still travels: Proposition 65 in California has its own threshold and can require a warning, so a product that sits inside an EU limit may sit outside a Californian one. State and dose are read together, and arsenic follows the same logic. ## Contaminant ceilings and the material limit Contaminant limits apply to the finished product, so the bottle result is an input rather than an answer. The table is the usual starting point; the destination text, the daily dose and the inclusion rate decide the final figure. Contaminant limits and the material limit for natural tocopherol | Parameter | Usual supplement limit | Evidence the file needs | Lead (Pb) | 3.0 mg/kg in the EU supplement | Lot result, method, limit and the finished-product calculation | Cadmium (Cd) | 1.0 mg/kg in the EU supplement | Lot result and any category exception that applies | Mercury (Hg) | 0.10 mg/kg in the EU supplement | Lot result and method | Arsenic (As) | Customer or market limit | The agreed limit and the method, stated on the certificate | Peroxide value | Not a legal limit in either market | The material limit, ≤10.0 meq O₂/kg, and the trend across lots The peroxide value row is worth separating from the rest. It is a quality limit agreed in the specification, and it is the number that warns of an off-odour in a softgel months before any legal ceiling is reached. No destination limit protects a brand from a stale oil; the specification has to do that work. ## What the pack may say The EU claims register carries vitamin E entries, each with conditions on the wording and on how much the product must contain. They are not reproduced here, and none is recommended. The brand checks the register and the daily dose before any wording goes on the pack. A US structure/function statement carries the DSHEA disclaimer and needs substantiation; a disease claim is not open. “Vitamin E” and “d-alpha-tocopherol” are ingredient declarations, not claims; “natural” describes the configuration of the molecule, and whether the pack may use it depends on the source record and the destination's rules, which the brand's reviewer confirms. We publish the specification and make no health claim. ## The document pack The folder needs the lot COA with the HPLC assay, the UV identity, the peroxide value, the rotation, the metal panel and the microbiology; a specification naming the isomer, the CAS number, the IU factor and the pack; an SDS in the 16-section format; and the feedstock source record, usually a vegetable-oil deodorizer distillate. The allergen statement follows that source. Whether a soy, sunflower or rapeseed feedstock requires a statement on the pack is the brand's decision on the source and the market rules; this page does not declare the material free of any allergen. Add the GMO, origin and residual-solvent statements, any antioxidant declaration, and the retest period with its pack and condition. ## Checks before the first order - Specification version, isomer name and CAS 59-02-9 are on the file. - COA, TDS, SDS, source, allergen, GMO and residual-solvent statements are present. - The contaminant results are converted to the finished-product dose. - The pack names the form and gives the vitamin in mg alpha-tocopherol equivalent. - The claim and the natural designation have been reviewed for the destination. - The pack, the storage condition and the retest period are agreed in writing. The natural tocopherol product page carries the catalog specification; the COA page explains the lot certificate; the identity page covers the analytical evidence; the EU regulatory notes collect the framework references; the quality page describes the release file. ### 06 How we prove a natural tocopherol lot is the d form URL: https://nutrition.rainwoodbio.com/products/vitamins/natural-tocopherol/identity/ Reviewed: 2026-11-20 A natural tocopherol lot is the d form when four lines agree: the document names d-alpha-tocopherol with CAS 59-02-9 and the formula C29H50O2, HPLC retention and the UV spectrum match the reference, the specific rotation is positive in the direction of the natural isomer, and the assay, the peroxide value and the homologue profile close the mass balance. An assay on its own cannot tell the natural alcohol from the synthetic dl material or from a cut oil, since the two isomers share a retention time on an achiral column. In one lineIdentity rests on the rotation as much as on the assay: the d form turns polarised light, the all-rac material does not, and the mass balance shows whether the rest is another tocopherol or a carrier. ## Four questions, four tests A lot can carry the right name on its paperwork and still be the wrong material. Each layer is a separate question, and an answer to the first alone is a document rather than evidence. Four layers of natural tocopherol identity | Layer | The question | Evidence | What it establishes | Document | Is the isomer named? | Name, CAS number, formula, source record | Paperwork only | Chromatography | Is it alpha-tocopherol? | HPLC retention and UV spectrum | The molecule, not the isomer | Chirality | Is it the d form? | Specific rotation, or a chiral separation | The natural configuration | Mass balance | Is it diluted or oxidised? | Assay, peroxide value, homologue profile | Consistency of the numbers ## HPLC and UV: which molecule is it The method should fix the column, the mobile phase, the detection wavelength and the standard. Alpha-tocopherol has an ultraviolet maximum near 292 nm, and that spectrum is what turns a retention time into an identification. A peak at the expected time may still be another homologue or a degraded standard, which is why the spectrum is recorded. Retention also separates the homologues. Alpha-, beta-, gamma- and delta-tocopherol differ by the number and position of the methyl groups on the ring, and a method that resolves them can report the alpha figure and the others in one run. An alpha concentrate shows alpha dominant; gamma and delta above a few per cent mean a mixed tocopherol or a different cut, which is a different label ingredient. HPLC with UV detection does not see chirality. That is the limit of the chromatographic layer, and it is why the next section exists. ## The rotation and the homologue ratio Natural d-alpha-tocopherol is a single stereoisomer, described as RRR. The synthetic material is all-rac: an equal mixture of eight stereoisomers, which is optically inactive as a whole. The practical test is polarimetry on the oil, reported with the solvent and the concentration, and the reading is positive for the natural form and close to zero for the synthetic one. The polarimeter is a simple instrument, but the number is only useful with its conditions attached. A rotation quoted without solvent, concentration, path length and temperature cannot be reproduced, and a small value from a dilute solution proves very little. Where the result is close to the threshold, a chiral separation by HPLC or by gas chromatography of a suitable derivative is the stronger evidence, and it can also show a blend of the two forms. The homologue ratio is the second number to read. It separates an alpha concentrate from a mixed tocopherol, and it catches a lot that has been stretched with a cheaper gamma-rich cut. The potency ratio completes the picture: 1.49 IU per milligram for the d form against 1.00 for the synthetic acetate, which is the arithmetic behind the mass per dose and the reason a mass-for-mass substitution under-doses the product. ## What X-ray diffraction can and cannot do here X-ray diffraction answers a solid-state question, and the neat product is a liquid. An amorphous oil gives no diffraction pattern to compare, so a request for “XRD confirmation” on the oil has no useful answer. Diffraction measures neither purity nor the optical form. Where diffraction earns its place is the powder on carrier. It can show whether the carrier is the crystalline material the specification names, whether an amorphous carrier such as maltodextrin has been substituted, and whether a crystalline diluent is present alongside the oil. For a disputed powder grade, XRD plus the assay plus the rotation is a stronger file than any one of them, and the report should include the reference pattern rather than a match statement. ## Where substitutions show up Common natural tocopherol substitutions and the signals | Substitute | What it changes | Signal | Test | Synthetic dl-alpha-tocopherol | Same retention, different stereochemistry | Rotation close to zero | Polarimetry, chiral separation | Carrier oil dilution | Lowers the assay and the IU per gram | Assay below spec; paler colour; its own peroxide value | Assay, mass balance, peroxide value | Mixed tocopherols sold as alpha | Raises the total tocopherol figure | Gamma and delta present | HPLC homologue profile | Acetate sold as the alcohol | No free phenol; not an antioxidant | Ester carbonyl in the infrared spectrum | IR, HPLC retention, hydrolysis before assay | Oxidised oil | Assay falls and colour darkens | Peroxide value high; off-odour | Peroxide value, appearance, anisidine value Colour is the least specific signal here, because yellow to amber covers a wide range and a fresh concentrate can be darker than a diluted oil. The stronger signals are the rotation, the homologue profile, the peroxide value and the mass balance. A certificate with the assay and the appearance but no rotation leaves the most likely substitution untested. ## Identity clauses for the specification - “D-alpha-tocopherol (natural), CAS 59-02-9, C29H50O2, oil; feedstock source declared.” - “Assay ≥90.0% d-alpha-tocopherol by HPLC, as-is; identification by HPLC retention and UV spectrum.” - “Specific rotation reported with solvent, concentration and temperature; limit agreed at order.” - “Peroxide value ≤10.0 meq O₂/kg; appearance yellow to amber oil.” - “Homologue profile reported; no carrier and no other tocopherol above the agreed limit.” - “Heavy metals and microbiology as listed; pack and storage condition stated.” ## What to ask before qualifying a lot - Which isomer is this lot, and what rotation was measured, in which solvent and at which concentration? - Will the chromatogram and the spectrum be released, or only the percentage? - What is the homologue profile, and what is the feedstock source for this lot? - What was the peroxide value at release, and how long has the lot been in the bottle? - If a result is disputed, will you re-test the retained sample jointly with our laboratory? Those answers, taken together, are an identity file; one percentage is not. The product hub carries the catalog specification; the COA page shows where each figure sits on the certificate; the grades page compares the concentrations; the level-four comparison covers the label consequences; the HPLC method note explains the separation and the quality page describes release. ### 01 What the COA for inositol hexanicotinate actually contains URL: https://nutrition.rainwoodbio.com/products/vitamins/niacin-inositol-hexanicotinate/coa/ Reviewed: 2026-11-20 The certificate for an inositol hexanicotinate lot reports appearance, identification by HPLC and IR, assay by HPLC, loss on drying, the heavy-metal panel, microbiology and particle size. Each line should carry its method and its release limit, with the measured result in a separate column. The assay is for the ester C42H30N6O12, not for niacin, and a niacin figure is a different calculation that has to be labelled as one. In one lineThe assay describes the ester, not the niacin it carries: the certificate has to state the assay basis, the loss on drying and a separate niacin figure before the 98.0–101.0% range means anything. ## The certificate as a test report A certificate earns its place when each line can be checked against a method and a boundary. For every parameter the reader needs to know what was measured, how it was measured and which limit the lot was released against. A row that reads only “conforms” records a conclusion without the evidence behind it, and the reader cannot tell whether the laboratory tested the ester or a hydrolysis product. Identification has to show the ester, not merely a nicotinate, and the assay has to be specific to the intact molecule. Identity, assay, moisture and contaminants · inositol hexanicotinate | Parameter | Method | Release limit | Appearance | Visual | White to off-white, free-flowing powder | Identification | HPLC retention and IR spectrum | Conforms to the reference | Assay (intact ester) | HPLC with UV detection | 98.0–101.0% | Loss on drying | Gravimetric | ≤1.0% | Heavy metals (Pb, As, Cd, Hg) | ICP-MS, per element | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology (APC, yeast/mould, pathogens) | Plate count; absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size (80 mesh) | Sieve analysis | ≥95% through 80 mesh ## The assay basis and the separate niacin figure The assay range is narrow and the moisture limit is 1.0%, so the basis can decide whether a lot sits inside the gate. A powder that reads 98.0% as-is with 0.8% loss on drying calculates to 98.79% on the dried basis. Put the basis in the assay row itself; a footnote is too easy to miss. The ester carries six nicotinoyl groups on one inositol ring. At full stoichiometry the nicotinic acid released on hydrolysis is 91.1% of the ester mass: 6 × 123.11 ÷ 810.72. A certificate line headed “niacin” should say whether it is that theoretical conversion or a measured hydrolysis result. The first follows from the assay arithmetic; the second can also detect free niacin and incomplete esterification. The method behind the assay matters for the same reason. An HPLC method that separates the intact ester from nicotinic acid and inositol gives an ester assay and an impurity profile in one run. A method that hydrolyses the sample and measures total nicotinate gives a niacin figure but cannot tell the ester from added free acid. Ask which method produced the number, and ask for the chromatogram if the answer is not clear. ## Release limit versus batch result Every certificate line carries a limit and, in a real report, a measured value. The limit is the gate the lot had to clear; the value is the evidence that it did. Printing the specification range in the result column reports no measurement at all. What the result column should contain | Parameter | Release limit | Result column | Assay | 98.0–101.0% by HPLC | Measured ester content with standard and basis | Loss on drying | ≤1.0% | Measured moisture and oven temperature | Heavy metals (Pb, As, Cd, Hg) | Four elements, separate limits | One ICP-MS result per element | Microbiology (APC, yeast/mould, pathogens) | Counts plus absence tests | Plate count, yeast/mould count, absence findings | Particle size (80 mesh) | ≥95% through 80 mesh | Measured percentage passing the sieve | Free nicotinic acid | An agreed limit, where the buyer sets one | A measured percentage, with the method The word “pass” should be redundant. The figures should let the reader draw the conclusion without taking it on trust: a count and an absence statement for microbiology, a figure for each metal rather than one combined total. A single total conceals which element was present. ## What moves between batches Esterification is the first source of variation. A reaction that leaves hydroxyls unesterified produces lower esters, and a total-ester method can still land inside the range. The hydrolysis ratio is the check that catches it: a fully esterified lot releases six moles of nicotinic acid per mole of inositol. Residual free nicotinic acid is the second. It can come from incomplete reaction or from hydrolysis during drying and storage, and it raises the niacin figure without raising the ester assay. Moisture is the third: the powder is hygroscopic, and a lot that picks up water before packing starts with less headroom under the 1.0% limit. Milling and sieving change the particle-size result without changing the chemistry. Colour is the least numerical line on the sheet: the white-to-off-white range is broad, and a small shift inside it is not an identity failure. A yellow cast together with a rising free-niacin figure is a different conversation. The lot code on the paper, the pouch, the drum and the retained sample should read the same. ## When to order an outside test An outside laboratory earns its cost at four moments: qualifying a new source, entering a regulated market for the first time, testing a form claim that the supplier's paperwork does not settle, and resolving a disputed lot. Do not simply repeat the supplier's panel; target the failure modes. The useful set is HPLC with UV and IR for identity, an ester-specific assay, free nicotinic acid, loss on drying, ICP-MS for the metals and microbiology. Add a hydrolysis experiment if the identity is in doubt: measure nicotinic acid and inositol after hydrolysis and confirm the six-to-one molar ratio. A “not detected” entry is only meaningful with the limit of quantification beside it; otherwise it describes the method's sensitivity, not the sample. Traceability is part of the evidence. The material in the laboratory should be the material in the retained sample, and the report should carry the lot code. A contested result goes to a referee with the retained sample, the certificate and the specification, and the request should be for tests that separate the ester from its hydrolysis products. ## What to compare between suppliers Compare seven lines: form and CAS number; assay result and basis; the HPLC method and whether it separates the intact ester; free nicotinic acid; loss on drying; heavy metals and microbiology; mesh and pack size. An assay match can hide a difference in basis or in free-niacin content. The second layer is traceability. The certificate should say who manufactured the lot, which esterification and drying steps were used, and which mill and sieve were applied. The catalog specification sits on the product hub. The forms are compared on the grade page; the tests that separate the ester from a blend are on the identity page; the chromatographic separation is described in the HPLC method note; the release workflow is on the quality page. The compliance page sets out the form, limits and label questions beside the certificate. ### 02 Inositol hexanicotinate, niacin or niacinamide: choosing the B3 form URL: https://nutrition.rainwoodbio.com/products/vitamins/niacin-inositol-hexanicotinate/grades/ Reviewed: 2026-11-20 Inositol hexanicotinate is one chemical grade — the hexa-ester of nicotinic acid and inositol — supplied as an 80 mesh powder or a granulated powder. The choice that changes the certificate, the label and the dose is not the mesh; it is whether the formula uses this ester, plain niacin (nicotinic acid) or niacinamide, because those are three different ingredients. In one lineThe grade question is which vitamin B3 molecule the formula and the label can carry, because the ester, the acid and the amide are three different ingredients. ## Why the grade question is a molecule question “Vitamin B3” is a family name. Inositol hexanicotinate, nicotinic acid and niacinamide all count as niacin sources in at least one market, but they are separate substances with separate CAS numbers and separate label names. A brief that asks for “niacin 100 mg” has chosen a nutrient figure, not a material. The ester is not a diluted or buffered niacin. It is a molecule with six nicotinoyl groups on an inositol ring, and its specification, solubility and label name follow from that structure. The physical grades — 80 mesh powder and granulated powder — change how the powder runs, not what it is. ## The three B3 materials side by side Inositol hexanicotinate, niacin and niacinamide · identity and handling | Property | Inositol hexanicotinate | Niacin (nicotinic acid) | Niacinamide | CAS number | 6556-11-2 | 59-67-6 | 98-92-0 | Molecular formula | C42H30N6O12 | C6H5NO2 | C6H6N2O | Molecular weight | 810.72 | 123.11 | 122.12 | Assay and method | 98.0–101.0% by HPLC | 99.0–101.0% by titration, dried basis | 99.0–101.0% by HPLC | Water solubility | Slightly soluble | Sparingly soluble | Freely soluble | Niacin figure | Up to 911 mg nicotinic acid per gram after hydrolysis | 1,000 mg per gram | The amide is declared as niacinamide | Label name | Inositol hexanicotinate | Niacin (nicotinic acid) | Niacinamide | Flush response | Chosen for a different release profile; the wording is a claims question | Immediate-release nicotinic acid is associated with flushing | Flushing is not reported at supplement doses Three columns are enough to show why the certificate cannot be shared. The assay methods differ, the solubility differs sharply, and the label names are not interchangeable. The niacin figure in the table is a calculated maximum for the ester, not a measured lot result. ## The physical grades: 80 mesh and granulated The catalog powder passes 95% through 80 mesh. That is a finishing specification: it affects flow, dust and content uniformity, and it can change when the mill or the sieve changes. A finer powder distributes better at a low dose per capsule; a granulated powder flows better on a high-speed press and produces less dust in the dispensing room. The material is hygroscopic. That makes the pack part of the grade: a 1 kg foil pouch and a 25 kg fiber drum with a liner are moisture barriers, and an open container is not. The powder is slightly soluble in water and soluble in organic solvents, so it disperses rather than dissolves in an aqueous mix. Granulation on request changes the particle profile and may change the lead time; it does not change the assay or the label. ## Matching the form to the dosage form Capsules and tablets. The ester is the usual choice when the label names inositol hexanicotinate and the formula needs the solid. It is a white powder at 80 mesh, and a granulated grade helps when the press runs fast or the blend segregates. Powder blends. The ester disperses in a dry blend without dissolving, which suits sachets and two-piece capsules. It is a poor fit for a clear drink: the solubility is low, and an aqueous system adds the hydrolysis risk described on the stability page. Dose arithmetic. A formula that declares 100 mg of nicotinic acid needs 100 ÷ 0.911 = 109.8 mg of the ester. A formula that weighs 500 mg of the ester delivers at most 455.6 mg of nicotinic acid equivalent. The label should say which figure it is declaring, because the ester mass and the niacin mass are not the same number. Combination products. The ester is not the acid, so it does not bring the acid's pH or its reaction with carbonate. That matters in a blend with alkaline minerals, though the ester can still hydrolyse in a wet matrix; the formulator checks the water activity rather than assuming the ester is inert. ## What to write into the specification - “Inositol hexanicotinate, CAS 6556-11-2, C42H30N6O12.” - “Assay 98.0–101.0% by HPLC, with the basis stated.” - “Identification by HPLC retention and IR spectrum.” - “Loss on drying ≤1.0%; free nicotinic acid within the agreed limit.” - “Particle size ≥95% through 80 mesh; heavy metals and microbiology as listed.” - “Pack: 1 kg foil pouch or 25 kg fiber drum with liner; hygroscopic.” - “Label name and destination market confirmed before the order.” We supply the ester, not the acid or the amide. A switch between the three is a new specification, a new label and a new dose calculation, and it should be handled as a change control rather than a swap at the weighing bench. The product hub carries the catalog limits; the level-four comparison takes the ester-and-niacin question further; the niacin page and the niacinamide page carry the other two specifications; the HPLC method note covers the assay. ### 03 Inositol hexanicotinate is hygroscopic; moisture and heat hydrolyse the ester URL: https://nutrition.rainwoodbio.com/products/vitamins/niacin-inositol-hexanicotinate/stability/ Reviewed: 2026-11-20 Inositol hexanicotinate is a hygroscopic ester, and moisture plus heat hydrolyse it back to nicotinic acid and inositol. A sealed moisture-barrier pack at a controlled temperature keeps it longest; an aqueous solution is the least stable format. The retest period comes from data on the exact pack and condition; the certificate does not set it. In one lineMoisture and heat hydrolyse the ester, so the pack, the water activity and the storage condition decide the shelf life, not the certificate. ## The powder: moisture is the first variable The catalog sets loss on drying at ≤1.0%. That is a release gate, not a storage allowance. Once a foil pouch is opened, the powder can take water from the air, and the water does two things: it raises the loss on drying, which lowers the as-is assay, and it provides the reagent for hydrolysis. The ester bond is the weak point in the molecule, and water plus heat splits it into nicotinic acid and inositol. The visible change may be small. The powder stays white to off-white for longer than the chemistry does, so colour is a poor warning. The useful signals are the loss on drying, the assay and the free nicotinic acid figure. A lot that has been open in a humid room can show a normal appearance and a falling ester assay at the same time. The pack is therefore part of the storage specification. Keep the powder in the original foil pouch or in an opaque, moisture-barrier container that closes properly. A clear jar is not a barrier, and a folded-over pouch is not a seal. Allow a cold pack to reach room temperature before opening so that condensation does not form on the powder. ## The solution: the least stable format The ester is only slightly soluble in water and soluble in organic solvents. In an aqueous system it is present as a dispersion, and the water is already in contact with the ester bonds. Heat, an acidic pH and an alkaline pH all accelerate hydrolysis, and a long hold at ambient temperature is enough to move the free nicotinic acid figure. A clear beverage is a poor fit for this material for two reasons: the solubility is low, so the powder does not dissolve, and the aqueous matrix gives the ester a medium in which to hydrolyse. A non-aqueous system, such as an oil-based fill or an anhydrous blend, is a better starting point. If an aqueous system is unavoidable, validate the hold time and the pH in the matrix rather than transferring a bulk-powder result. Solubility is not stability. A clear organic solution can still hydrolyse if it contains water, and a dispersion can be stable enough for a short hold if the water activity is controlled. The question is always the matrix, the temperature and the time. ## What drives degradation Factors that move inositol hexanicotinate during storage | Factor | What it does | Control | Moisture | Raises loss on drying; supplies the water for hydrolysis | Sealed foil pouch; liner; desiccant where needed | Heat | Accelerates hydrolysis at any water activity | Controlled store; cool process | pH | Acid or base catalyses ester hydrolysis | Check the matrix pH; avoid wet alkaline blends | Time | Hydrolysis accumulates even at a low rate | Assign a retest period; re-assay after it | Pack seal | A pinhole or a folded pouch admits humid air | Heat-sealed pouch; intact liner; inspect the seal | Light | No strong photolysis route is documented for the ester; the pack stays opaque for moisture control | Keep the original pack; avoid a clear container The factors reinforce one another: a warm, damp store is worse than the two conditions measured separately, and a wet alkaline blend is worse than a dry neutral one. The useful stability question is not whether the ester is stable in general, but how long it holds in a named pack at a named condition. ## A stability protocol for the ingredient An auditable protocol fixes four variables: the pack, the condition, the time points and the test panel. The warehouse arm holds the sample at 25 °C and 60% relative humidity; an intermediate arm uses 30 °C and 65% relative humidity, while 40 °C and 75% relative humidity is the accelerated stress arm. Add an in-use arm with the pouch opened and resealed, because that is the condition the customer creates. Test the ester assay, free nicotinic acid, loss on drying, appearance, identity and microbiology at each point. Add the hydrolysis ratio if the method is available: nicotinic acid and inositol should stay close to six to one, and a drift in that ratio is an early sign of hydrolysis or of a different ester mixture. The report should list each result rather than a single pass line, and it should name the pack and the lot family. Ask for the stability summary for the pack you will buy. The pouch and the drum differ in headspace, in surface-to-volume ratio and in how often they are opened; a result from one does not describe the other. ## The finished formula changes the answer A capsule or tablet starts with a low water activity, which is the friendly case for this ester. The risk moves to the process: wet granulation with water puts the ester in contact with the reagent, and a drying step that does not remove the water leaves it there. Dry granulation or a direct-compression route avoids that step and is the safer starting point. Excipients matter. An alkaline ingredient such as sodium bicarbonate or magnesium hydroxide can catalyse hydrolysis in a blend that picks up moisture, and an acidic ingredient can do the same. The formulator checks the pH of the matrix and the water activity of the blend rather than treating the ester as inert. A powder blend in a sachet adds the package and the consumer's spoon to the chain, so the in-use period belongs in the data. ## How the shelf life is set There is no single shelf-life figure for this ester. The number that matters belongs to the pack and the storage condition, and it is supported by the file for that pack. A figure that does not name its pack, condition and test panel is not a shelf life. When the retest period ends, re-test the retained sample before extending it. An extension is a data decision, and a figure earned for a drum does not transfer to a pouch. Pack formats and standard units are set out on the product hub; the release limits sit on the COA page; drums, pouches and dispatch windows are on the MOQ page; the HPLC method note covers the ester assay; and the quality page describes release and retained samples. ### 04 Inositol hexanicotinate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/vitamins/niacin-inositol-hexanicotinate/moq/ Reviewed: 2026-11-20 The minimum order for inositol hexanicotinate is 1 kg, packed in a foil pouch. Production quantities go into a 25 kg fiber drum. Dispatch is quoted at 1–7 days from confirmation, and a quotation is only comparable when it names the form, the assay basis, the pack, the destination and the documents. In one lineOne kilogram is the smallest pack that can be sampled, tested and traced as a lot, and it is also the pack that fits a bench trial. ## Why the minimum is 1 kg One kilogram carries a bench trial, a retained sample and an outside identity check. It also travels as a parcel, so a formulator can start work before the production plan is signed off. The pouch has its own lot code, which is what ties the trial results to the certificate. A smaller order has to be taken from a larger lot. That repack adds a handling step and a new record, and the material can no longer be presented as the original pack. At the other end, the 25 kg drum cuts the handling per kilogram but locks up inventory and storage time. The minimum is set by the pack, not by a volume target. ## Packs and formats Standard inositol hexanicotinate packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; close it after use | Fiber drum | 25 kg | Production | Liner and lot code on the drum | Granulated powder | On request | Flow and dust control | Particle profile changes; dispatch may move | Dilution | On request | Lower assay per gram | Carrier changes the label; new specification The catalog grade is an 80 mesh powder, with at least 95% passing 80 mesh. Changing the mesh or adding a carrier creates a different specification; it is not a packing option. Tell us before the quotation if the press needs a coarser or freer powder, because the change can move the dispatch date as well as the sieve line. The powder takes up water, so the pouch and the drum liner are working parts of the pack. A pouch that has been rolled closed is not sealed; the air inside it is still humid. If the remainder will sit for months, move it to a smaller dry container or finish it inside the stated in-use period. ## Lead time and dispatch Dispatch is quoted at 1–7 days from confirmation. The count starts when the order is confirmed and stops when the carrier takes the pack; transit, customs and the buyer's own release are outside it. A granulated grade, a dilution or a special pack needs its own line in the quotation and its own date. Ask for the date the pack leaves, not just the range. A pouch usually travels as a parcel and a drum on a pallet, and the Incoterm decides who books the freight and who clears import. The certificate and the other lot papers should be in the same shipment as the goods. ## What a quotation needs A quotation can be compared when it carries six things: - The material and its form. Inositol hexanicotinate, CAS 6556-11-2, with the ester written out rather than “niacin”. - The release specification. Assay and basis, loss on drying, free nicotinic acid, mesh, heavy metals and microbiology. - The quantity and the pack. 1 kg pouch, 25 kg drum, or a granulated variant. - The destination and the trade term. The country, the port or address, and the Incoterm. - The documents. COA, specification, SDS, allergen and GMO statements, and any market-specific declaration the importer needs. - The use and the market. Supplement, food or another use, and the country where the finished product will be sold. A quote that omits the destination or the form describes a range of possibilities, not a lot that can be bought. The same material can clear one market's file and fail another's, so the papers are part of what is being sold. The commercial terms sit on the quotation, not in this document. ## The sample is a lot, not a demonstration The kilogram is the unit that gets qualified. Run identity, assay, free nicotinic acid, moisture and microbiology on it before scale-up, and retain part of the same pack. The lot code should appear on the sample, the certificate and the quotation. Without that code, the material is a demonstration, not a qualified lot. A trial needing less than a kilogram is a split. It comes out of a bulk lot, gets a handling record of its own and cannot be sold or described as the 1 kg pouch. Put the split request in writing and keep its code with the trial data. The bench sample and the production drum need not share a lot, even when both meet the specification. ## Terms to settle before the first order The quotation should put commercial and quality terms on one page: Incoterm, pack, dispatch window, specification revision, one COA per lot, the retained sample, the retest period and the change route. A quality agreement signed before the first production order is easier than one negotiated after a problem. If a lot fails the agreed specification, the retained sample is re-tested against the named method. Photographs of the drum do not settle a dispute. The agreement should name the referee laboratory both sides accept and say which side carries its fee. Appearance alone is a poor basis for a return, especially for a hygroscopic ester. The product hub carries the catalog specification; the COA page lists the release tests; the stability page covers the storage conditions; the MOQ glossary entry defines the term; the logistics page covers shipping and documents. ### 05 The regulatory file for inositol hexanicotinate URL: https://nutrition.rainwoodbio.com/products/vitamins/niacin-inositol-hexanicotinate/compliance/ Reviewed: 2026-11-20 Inositol hexanicotinate is an ester of nicotinic acid and inositol, CAS 6556-11-2. The specification describes the material; the regulatory file has to connect the form, the niacin figure, the dose, the contaminant results and the label to the destination. The buyer's regulatory team confirms that route for the market and the finished product, and this page lists the documents and checks that belong in the file. In one lineThe permitted-forms list names the ester, but the niacin figure, the dose and the label are separate checks that the buyer's regulatory team confirms for the destination. ## The four checks The first check is the identity: which substance, in which form, is being placed on the market. The second is the nutrition calculation: how much niacin the ester contributes per portion, and in which unit the market declares it. The third is the contaminant result against the limit for the product as sold. The fourth is the label and the claim, which have their own rules and cannot be inherited from the ingredient listing. Each check can fail on its own: a lot can clear every metal limit and still carry the wrong form name, and a label can name the ester correctly while the niacin figure is calculated on the wrong basis. ## European Union Directive 2002/46/EC is the food-supplement instrument. Annex II lists the permitted niacin forms, and the list includes nicotinic acid, nicotinamide and inositol hexanicotinate (inositol hexaniacinate). The label has to name the form that was used. The buyer's regulatory team confirms that the entry covers the material and the product category for the destination, and records the confirmation in the file. The European Food Safety Authority reviewed the ester as a niacin source in 2009. Its panel concluded that nicotinate from inositol hexanicotinate is bioavailable and a source of niacin, and it derived a use level of about 11 mg of the ester per day from the existing upper safe level for nicotinic acid of 10 mg/day. The panel noted that the release from the ester is slow and that the flush effect is not likely, but that the data supporting the absence of flushing were limited at the time. The derived level is far below the ester doses used in many finished products, so how a member state handles a higher dose is a question for the buyer's regulatory team, not something the certificate answers. Regulation (EU) 2023/915 sets the contaminant limits that apply to food supplements at the point of sale: 3.0 mg/kg for lead, 1.0 mg/kg for cadmium and 0.10 mg/kg for mercury. Arsenic is not harmonised at EU level, so a member state may set its own figure. The labelling rules are in Regulation (EU) No 1169/2011, read with the supplement particulars in the Directive. Niacin's EU nutrient reference value is 16 mg NE, and the label percentage is calculated from that figure. ## United States In the US, inositol hexanicotinate is marketed as a dietary ingredient for supplements. The file should state the basis on which the ingredient is marketed and keep the evidence with it; the buyer's regulatory team confirms that the basis extends to the finished product. 21 CFR 101.36 sets the Supplement Facts panel. Niacin is declared in milligrams of niacin equivalents against the 16 mg NE Daily Value for adults and children four years and older, and the source line names the form. That name has to match the certificate. The cGMP rule in 21 CFR 111 requires identity testing of each component, so the buyer's own identity test on receipt is part of the file. The US tolerable upper intake level for niacin is 35 mg/day, set on the flush response to nicotinic acid. Whether and how that level applies to the ester is a dose-review question; the certificate does not settle it. Federal law sets no lead maximum for dietary supplements, while California's Proposition 65 sets exposure thresholds that many buyers model against the daily dose. ## Contaminants and limits Heavy metals · catalog limit and market position, food supplements | Element | Catalog limit on the powder | EU supplement limit | US federal position | Lead (Pb) | ≤3 mg/kg | 3.0 mg/kg | No federal maximum for supplements; state rules may apply | Cadmium (Cd) | ≤1 mg/kg | 1.0 mg/kg | No federal maximum specific to supplements | Mercury (Hg) | ≤0.1 mg/kg | 0.10 mg/kg | No federal maximum specific to supplements | Arsenic (As) | ≤2 mg/kg | Not harmonised; member state rules may apply | No federal maximum specific to supplements Material and product limits are different numbers. The table applies to the powder as shipped; the regulation applies to the supplement as sold, after dilution by excipients and division into doses. A high-dose single-ingredient capsule barely dilutes the powder, so the calculation has to be made and kept. ## Labels and claims An ingredient listing does not authorise a health claim. In the EU, health claims are governed by Regulation (EC) No 1924/2006 and the authorised wording sits in Regulation (EU) No 432/2012; only the authorised wording may be used. In the US, a structure/function statement is the brand's responsibility, needs substantiation and carries the DSHEA disclaimer. In the UK, the GB register lists the wording that may be used. No disease claim is available in any of the three markets. This site publishes the specification; it does not publish a health claim. The flush is a label question, not a specification line. Immediate-release nicotinic acid is associated with flushing, while the ester releases nicotinic acid more slowly. Any label statement about that difference is a claim, not a measured property of the certificate, and it needs its own support and review for the destination. The form name alone is an ingredient declaration, not a claim. ## The document pack - Batch COA with HPLC assay and basis, IR identity, loss on drying, free nicotinic acid where agreed, metals, microbiology and mesh. - Specification and technical data sheet naming the ester, the CAS number and the assay basis. - Safety data sheet with the standard sixteen sections. - Contaminant report against the destination limits, including the arsenic decision. - Nutrition declaration worksheet showing the niacin contribution per portion and the percentage of the NRV or Daily Value. - Statement of manufacture and country of origin, plus allergen, GMO and residual-solvent statements where required. ## The checks before a shipment - The certificate names inositol hexanicotinate, CAS 6556-11-2, not “vitamin B3” or “niacin”. - The label ingredient line names the same form as the certificate. - The niacin figure per portion is calculated on a stated basis and checked against the NRV or Daily Value. - The contaminant results are compared with the product as sold, not only the powder. - The arsenic position is decided and documented for the destination. - The claim wording, including any flush statement, has been reviewed for the destination. - The warning texts required by the market are present and complete. - The buyer holds its own identity test on receipt. The instruments are described on the EU regulatory page, the US regulatory page and the UK regulatory page. The release tests are on the COA page, the identity checks on the identity page, and the catalog limits on the product hub. ### 06 How to prove an inositol hexanicotinate lot is the ester URL: https://nutrition.rainwoodbio.com/products/vitamins/niacin-inositol-hexanicotinate/identity/ Reviewed: 2026-11-20 A lot is inositol hexanicotinate when four measurements agree: the document names the ester and the CAS number, HPLC and IR match the reference, hydrolysis gives six moles of nicotinic acid per mole of inositol, and the assay, moisture and impurities close the mass balance. The assay alone cannot separate the ester from a blend with nicotinic acid, inositol or a lower ester. In one lineIdentity is the agreement of four measurements: the document, the HPLC and IR spectra, the 6:1 niacin-to-inositol ratio after hydrolysis, and the mass balance. ## The four identity layers Each layer answers a different question, and a supplier who answers only the first has described the paperwork rather than the powder. The layers are not alternatives; they are checks that should agree. Four layers of inositol hexanicotinate identity | Layer | Question | Test | What it proves | Document | Is the ester named? | Name, CAS number, formula | Paperwork only | Chromatography | Is the molecule the ester? | HPLC retention and UV spectrum | The intact ester, if the method separates it | Spectroscopy | Are the functional groups right? | IR spectrum against a reference | Ester carbonyl and pyridine rings; no free acid | Stoichiometry | Is the ratio six to one? | Hydrolysis, then nicotinic acid and inositol | The ester composition, not just a nicotinate | Mass balance | Is it diluted? | Assay, loss on drying, impurities | Consistency of the numbers The HPLC method has to separate the intact ester from nicotinic acid and inositol. A method that hydrolyses the sample first measures total nicotinate and cannot distinguish free acid from the ester; it is a niacin assay, not an ester identity test. Ask for the chromatogram and the retention of the reference standard. IR adds a different kind of evidence. The ester shows a carbonyl absorption and the pyridine ring, and it lacks the broad acid O–H of nicotinic acid. A spectrum that fits a nicotinate but not the ester reference is a reason to pause, not a cosmetic difference. ## The 6:1 ratio and the hydrolysis arithmetic The ester is built from one inositol and six nicotinic acid units. On complete hydrolysis it yields six moles of nicotinic acid per mole of inositol, and the masses add up with the water that is consumed: 810.72 g of ester plus 108.09 g of water gives 738.66 g of nicotinic acid and 180.16 g of inositol. That is why the two hydrolysis figures sum to about 113% of the ester mass, not to 100%. The theoretical fractions follow from the same arithmetic. Nicotinic acid is 91.1% of the ester mass and inositol is 22.2%. A laboratory report that shows about 91% nicotinic acid and about 22% inositol is consistent with the ester; a report that shows 91% nicotinic acid and no inositol has measured only half of the molecule. The ratio is also the adulteration check. A lot blended with free nicotinic acid shows a high nicotinic acid figure and a low inositol figure. A lot made with a lower ester, such as a tri-ester, shows a ratio below six and a different HPLC profile. A lot diluted with a carrier shows a low assay and a mass balance that does not close. ## X-ray diffraction: the solid-state check XRD addresses the solid state rather than the assay: is the solid crystalline, and does its pattern match a reference? A pattern can tell a crystalline ester from an amorphous carrier or a simple blend, and it can compare two suppliers' lots. The diffractogram is silent on purity and on the six-to-one ratio; those questions stay with HPLC and hydrolysis. Before accepting a “match” statement, ask for the reference pattern and the detection limit. It is not a routine release test here, and a certificate that says only “XRD conforms” has shown little without the pattern. Use it when the dispute is about solid form or a suspected blend; it will not settle an assay question. ## What adulteration looks like Common inositol hexanicotinate substitutions and the signals | Adulterant | What it does | Signal | Test | Free nicotinic acid | Raises the niacin figure; adds acidity and water solubility | Free acid peak; ratio above six; low pH | HPLC, pH, hydrolysis ratio | Free inositol | Lowers the ester assay; shifts the ratio | Inositol high relative to niacin | Hydrolysis and HPLC or IC | Lower ester | Mixture of partially esterified species | Multiple peaks; ratio below six | HPLC profile, hydrolysis ratio | Carrier dilution | Lowers the assay; changes loss on drying and ash | Assay low; mass balance fails | Assay, LOD, ash, microscopy | Another nicotinate | Similar UV, different retention or IR | Retention or spectrum mismatch | HPLC/UV, IR, XRD Of the available signals, appearance is the least specific: the white-to-off-white range is broad, and a blend can reproduce it. The stronger signals are the hydrolysis ratio, the IR spectrum and the mass balance. A certificate that reports appearance and assay but not the ratio has left the most likely substitution untested. ## How to write identity into the specification - “Inositol hexanicotinate, CAS 6556-11-2, C42H30N6O12.” - “Assay 98.0–101.0% by HPLC, with the basis stated and the method specific to the intact ester.” - “Identification by HPLC retention and IR spectrum against a reference.” - “Hydrolysis ratio: six moles nicotinic acid per mole inositol, where the test is required.” - “Free nicotinic acid within the agreed limit; loss on drying ≤1.0%.” - “Particle size: at least 95% passes 80 mesh; metals and microbiology per the release panel.” - “Destination market, label name and niacin contribution confirmed before the order.” ## Five questions for the supplier - Which ester is this lot, and which CAS number is on the certificate? - Does the HPLC method separate the intact ester from nicotinic acid and inositol? - Can you provide the IR spectrum and the reference it was compared with? - What is the free nicotinic acid result, and what is the hydrolysis ratio? - If a lot is disputed, would you join a re-test of the retained sample for the hydrolysis ratio and the IR spectrum? The five answers together are the identity file; one assay figure is not. The specification sits on the product hub; each certificate line is mapped on the COA page; the grade page separates the B3 forms; the level-four comparison follows the label consequences; and the methods library with the FTIR method note explains the spectra. ### 02.1 Inositol hexanicotinate vs niacin: the ester, the flush and the label URL: https://nutrition.rainwoodbio.com/products/vitamins/niacin-inositol-hexanicotinate/grades/niacin-inositol-hexanicotinate-vs-niacin/ Reviewed: 2026-11-20 Inositol hexanicotinate is not plain niacin. It is an ester of six nicotinic acid units and one inositol, CAS 6556-11-2, and it carries at most 91.1% niacin by mass. The label has to name the ester, the niacin figure has to be calculated on a stated basis, and a flush statement is a claim that needs support rather than a property of the certificate. In one lineThe ester is a different molecule from niacin: six nicotinic acid units on one inositol, 91.1% niacin by mass, and a label name that has to say so. ## The ester, not a diluted niacin Nicotinic acid is a single pyridine carboxylic acid, CAS 59-67-6, formula C6H5NO2, molecular weight 123.11. Inositol hexanicotinate joins six of those acids to one inositol ring through ester bonds: C42H30N6O12, molecular weight 810.72. The ester is a different molecule, with a different CAS number, a different certificate and a different label name. Inositol hexanicotinate and nicotinic acid | Property | Inositol hexanicotinate | Niacin (nicotinic acid) | CAS number | 6556-11-2 | 59-67-6 | Formula | C42H30N6O12 | C6H5NO2 | Molecular weight | 810.72 | 123.11 | Niacin content | Up to 911 mg/g after hydrolysis | 1,000 mg/g | Water solubility | Slightly soluble | Sparingly soluble | Assay | 98.0–101.0% by HPLC | 99.0–101.0% by titration, dried basis | Label name | Inositol hexanicotinate | Niacin (nicotinic acid) The mass difference is the point. A milligram of the ester is not a milligram of niacin, and a formula that substitutes one for the other at the same weight changes the niacin contribution by about 10%. ## The flush and the release profile Immediate-release nicotinic acid is associated with a transient flush in many people, and that response is the reason the ester is chosen for some formulas. The ester releases nicotinic acid slowly as it is hydrolysed, and the EFSA review in 2009 noted that the flush effect is not likely from the ester, while also noting that the data supporting the absence of flushing were limited at the time. That is a scientific and claims question, not a certificate line. A finished product described as flush-free is making a claim, and the claim has to be supported for the dose and the matrix and reviewed for the destination. The certificate reports the ester, the assay and the impurities; it does not establish how a person will respond. This page makes no flush claim for the material. The release profile also depends on the dosage form. A capsule disintegrates and releases the powder; a tablet with a modified-release coat changes the rate again. The formulator who needs a particular profile has to test it in the finished product, not infer it from the raw material. ## The niacin arithmetic The conversion factor is fixed by the formula: 6 × 123.11 ÷ 810.72 = 0.9111. A 500 mg weigh-up of the ester delivers at most 455.6 mg of nicotinic acid equivalent. A label that declares 100 mg of niacin needs 109.8 mg of the ester. These are not dose recommendations; they are the sums that keep the label and the weigh-up consistent. Two cautions follow. First, 91.1% is a theoretical maximum, reached only at complete hydrolysis and full esterification; a lot with free nicotinic acid or a lower ester delivers less. Second, the label may declare the ester mass, the nicotinic acid equivalent or the niacin equivalent, and the three are different figures. The declaration has to say which one it is using, because a reader who assumes the ester mass is niacin mass overstates the intake by about 10%. On a Supplement Facts panel, niacin is declared in milligrams of niacin equivalents against the 16 mg NE Daily Value, and the source line names the form. In the EU, the nutrient reference value is also 16 mg NE, and the percentage is calculated against it. The ester's contribution to that figure is a regulatory and analytical question, not a fixed multiplication that every market accepts. ## What the label has to say In the EU, the permitted-forms list names “inositol hexanicotinate (inositol hexaniacinate)”, and the label has to use a name that matches the form in the product. “Niacin” alone does not identify the ester, and “vitamin B3” identifies nothing at all. In the US, the Supplement Facts source line should name the ester, for example “Niacin (as inositol hexanicotinate)”, and the name has to match the certificate. Niacinamide is a third ingredient, not a synonym. It is the amide, CAS 98-92-0, freely soluble and close to neutral in solution, and it has its own label name. A switch from the ester to the amide, or to the acid, is a new specification and a new label; it is not a swap made at the weighing bench. The niacin page and the niacinamide page carry those specifications. The label also carries the quantity. State whether the number is the ester mass or the nicotinic acid equivalent, and keep the certificate, the specification and the label on the same basis. A label that gives the ester mass but the analyst's report in niacin equivalent invites a dose error that no certificate can correct. ## The market question The EU list, the EFSA opinion and the US dietary-supplement route are three different documents. The EU list names the form; the EFSA opinion describes the ester as a niacin source and derives a use level of about 11 mg/day from the 10 mg/day nicotinic acid upper safe level; the US route uses the dietary-ingredient framework and applies the Supplement Facts rules. A product at a higher ester dose sits between those positions, and the buyer's regulatory team has to confirm how the destination reads it. The UK adds a fourth file. Great Britain uses the retained lists and the GB register; Northern Ireland follows the EU framework. The delivery address decides which applies, and the label and the entry cited have to match that decision. The compliance page sets out the documents and the checks; the identity page covers the tests that prove the ester. The methods library describes the HPLC and IR work, and the quality page describes the release workflow. ## When to choose the ester Choose inositol hexanicotinate when the brief calls for the ester, the label can carry that name, and the niacin arithmetic has been done on the ester basis. Choose plain niacin when the label says niacin (nicotinic acid), the formula can carry the acid, and the immediate-release profile is acceptable. Choose niacinamide when the formula needs a freely soluble, near-neutral B3 source and the label can name the amide. The three are not interchangeable, and a late switch is a labelling event as well as a formulation one. The product hub carries the catalog specification for the ester, and the grade page places this comparison in the wider B3 range. ### 01 What a sunflower lecithin COA has to show URL: https://nutrition.rainwoodbio.com/products/fatty-acids/sunflower-lecithin/coa/ Reviewed: 2026-11-20 A sunflower lecithin certificate describes a mixture, so it reports composition rather than one potency. Acetone-insoluble matter and the phosphorus-based phospholipid figure size the phosphatide fraction, the fatty acid and sterol lines name the plant source, and moisture, acid value and peroxide value record the condition of the lot. The catalog limits below are release gates; the batch COA is the evidence for a particular pack. In one lineThe phospholipid figure only means something with its basis and its source: acetone-insoluble matter, the phosphorus factor and the sunflower profile answer three different questions. ## The certificate as a release document A useful certificate can be audited line by line. Each row should say what was measured, which method produced the number, which limit the lot was released against, and what the lot actually measured. A row that reports only “conforms” asks the reader to accept a conclusion without the evidence behind it. Read the sheet in four blocks: what the material is, how much phosphatide it carries, what condition it is in, and what has been screened out. The identity block is where the source is named; for sunflower lecithin that means the plant name and, where a claim depends on it, the seed type. Release lines on a sunflower lecithin certificate | Test | Method | Release limit | Appearance | Visual | Yellow to light brown powder or viscous fluid | Identification | Phospholipid profile by TLC or HPLC | Profile conforms to the reference | Acetone-insoluble matter | Gravimetric, acetone extraction | ≥60.0% | Phospholipids | Phosphorus method, factor stated | ≥60.0% | Moisture | Karl Fischer or loss on drying, as stated | ≤1.0% | Acid value | Titration, mg KOH/g | ≤30 | Peroxide value | Titration, meq O₂/kg | Reported; not a catalog release gate | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent Peroxide value and residual solvent sit outside the catalog gates, but both belong in a buyer's file for a material that carries oil or was solvent-extracted. ## Acetone-insoluble matter, phosphorus and the sunflower factor Acetone is the solvent that separates phosphatides from oil. Triglycerides, free fatty acids and sterols dissolve; the phosphatides stay behind as a residue. Drying and weighing that residue gives acetone-insoluble matter. It is a residue weight, not a class-specific assay, and non-phospholipid material that resists acetone is counted with it. The phospholipid figure is usually a calculation: phosphorus is measured, then multiplied by a factor derived from the average molecular weight of the phosphatides. The certificate should print the factor. Sunflower gums and soy gums do not have the same class pattern, so a factor copied from a soy specification is not automatically the right one for a sunflower lot. A lot measured at 2.45% phosphorus reads 61.3% at a factor of 25 and 64.4% at 26.3; the sheet should say which convention was used. Moisture has its own convention. Karl Fischer titrates water; drying at 105 °C also drives off other volatiles. The catalog limit is moisture at ≤1.0%, while the EU additive entry limits loss on drying at ≤2.0%, so a lot can meet one number and miss the other unless the method is printed beside the result. ## Release limit and batch result A release limit is the boundary; a result is a measurement. Both belong on the page, in separate columns, with the method next to them. A result column that repeats the catalog range is a copy of the gate, not evidence from the lot. What the result column should contain | Parameter | Release limit | Result column | Acetone-insoluble matter | ≥60.0% | A measured percentage and the drying condition | Phospholipids | ≥60.0% | A measured percentage, the phosphorus figure and the factor | Moisture | ≤1.0% | A measured percentage and the method | Acid value | ≤30 mg KOH/g | A measured figure | Heavy metals | Per element | A figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot Judge the lot from the numbers. A single heavy-metal total hides the element that drove it, and “pass” without a count and an absence statement is not a microbiology result. For the sunflower source, add the fatty acid or sterol result when the order depends on the source claim. ## What changes from lot to lot Four things move between sunflower lecithin lots: the oil left in the product, the seed type, the phospholipid class pattern, and the moisture and acid value. Oil and seed type are set at the seed and at degumming; the class pattern follows the seed and the gum process; moisture and acid value are shaped by drying and by storage. Colour follows all four and is the least diagnostic of them. Seed type is easy to overlook. Standard sunflower is linoleic-rich; a high-oleic sunflower shifts the fatty acid profile toward oleic acid and changes the oxidation behaviour of the oil fraction. If the certificate or the order refers to a seed type, the fatty acid profile should support it. Watch the direction across shipments rather than one result. An acid value that has climbed toward 30, moisture sitting at 0.9%, or an acetone-insoluble figure that has fallen toward 60 says more than a single pass. The lot code on the certificate should match the pouch, the drum and the retained sample. ## When an outside test is worth ordering Order an independent test for a new source, a first shipment into a regulated market, a soy-free claim that rests only on the name, or a disputed oxidation result. A useful outside panel adds a check that the release certificate does not make. Start with the doubt. If the source is in doubt, the useful tests are acetone-insoluble matter, phosphorus, the phospholipid class profile, and the fatty acid and sterol profiles. If the condition is in doubt, acid value, peroxide value and moisture answer it. If the allergen statement is in doubt, ask for the manufacturer's line record and, where the claim needs one, a soy-specific test with a stated detection limit. If a result is disputed, the referee should receive the retained sample together with the supplier's certificate and the written specification, and the request should name the test that separates one source from another. A repeat of the same assay rarely settles the question. ## Comparing two sunflower certificates Compare certificates on six lines: source and seed type, acetone-insoluble matter, the phospholipid figure with its factor, the class and fatty acid profiles, acid and peroxide values, and the contaminant panel. Two suppliers can both quote “60% sunflower lecithin” and still be selling different materials if one figure is AI and the other is a phosphorus calculation. Ask who manufactured the lot, which country grew the seed, how the gum was separated and dried, and whether the line is shared with soy. Those answers decide whether the allergen statement is supportable. The catalog specification sits on the sunflower lecithin product page; the source tests are on the identity page; the market file is on the compliance page; the assays are described in the methods library; release is described on the quality page. ### 02 Fluid, deoiled or high-oleic: choosing a sunflower lecithin grade URL: https://nutrition.rainwoodbio.com/products/fatty-acids/sunflower-lecithin/grades/ Reviewed: 2026-11-20 Sunflower lecithin is bought by three choices at once: the form (fluid or powder), the seed type behind the fatty acid profile, and the phospholipid figure on the certificate. The catalog grade carries ≥60.0% phospholipids and ≥60.0% acetone-insoluble matter and is supplied as a powder, with the fluid form available on request. Each choice changes the mass on the label, and the seed type also changes the source record in the buyer's file. In one lineThe grade is fixed by the phospholipid figure, the form and the seed type; a change in any one of them moves the dose weight and the handling, and a change of seed moves the source record. ## Why the range exists Three forces shape the range. Oil content comes first: a fluid lecithin keeps much of the sunflower oil, whereas a deoiled powder is mostly phosphatide. Handling comes second: a capsule line needs a free-flowing powder, and an oil blend can take a viscous fluid. The third is the seed itself, since standard sunflower is linoleic-rich and a high-oleic crop gives a different fatty acid profile and a more oxidation-resistant oil fraction. Organic certification cuts across all three. It is a chain-of-custody grade, not a chemical one: the lecithin, the carrier and the processing aids all have to sit inside the certified system. The catalog grade is the conventional 60% material in powder form; the fluid and the specialty grades are quoted as separate lines. “Lecithin” alone does not identify a grade. Write the source, the figure, the form and, where a claim depends on it, the seed type before asking for a quotation. ## Fluid, deoiled, carrier-supported and modified Sunflower lecithin forms in commercial use | Form | Acetone-insoluble matter | Physical state | Where it is used | What follows the choice | Fluid sunflower lecithin | About 60–65% | Viscous, amber | Emulsifier, oil blends | More grams per gram of phospholipid | Deoiled sunflower powder | ≥95% | Free-flowing powder | Capsules, dry blends | Less oil; more phospholipid per gram | Carrier-supported powder | Carrier plus 50–70% lecithin; AI lower | Free-flowing powder | Sticks, blends | Carrier is declared; AI is read on the powder | Hydrolysed lecithin | ≥56.0% | More hydrophilic fluid or powder | Instant powders, emulsions | Higher acid value; separate additive limits | High-oleic grade | Same AI band | Fluid or powder | Blends where oxidation matters | Different fatty acid profile; check it on the certificate | Organic grade | Same AI band | Fluid or powder | Certified products | Certified chain, carrier and processing aids The catalog grade is the 60% band, quoted as a powder or a fluid. Within that band a powder may be deoiled, which pushes the AI figure far above 60%, or built on a carrier, in which case the carrier is declared and the AI is read on the finished powder. The certificate and the carrier declaration are what tell the two apart. Hydrolysed lecithin is a separate process form: the enzyme step raises the acid value and improves water dispersibility, and the EU additive specification gives it an AI minimum of 56.0% with an acid-value ceiling of 45. High-oleic and organic are choices about the seed and the chain rather than the process, and neither is visible in the acetone-insoluble figure alone. ## Handling the powder and the fluid A fluid grade moves slowly when cold, so it is usually warmed before transfer. Heat has a cost: colour darkens and hydrolysis speeds up, which is why the heater setting and the time should be logged. A powder picks up water, dusts and cakes in a humid store; it disperses in water but never forms a clear solution. Flow is not a cosmetic property. A deoiled powder and a carrier-supported powder can pass the same mesh and still differ in bulk density, and a hopper that feeds one may bridge on the other. Put bulk density and flow on the specification for a powder, and say whether the figure is measured on the powder or on the lecithin itself. Both forms dislike heat. A powder that has sat warm may still flow freely and still show a higher acid value than the release certificate, because hydrolysis does not change the look of the powder. ## Dose arithmetic for each grade Begin with what the label actually declares. If it declares lecithin, the divisor is the mixture weight. If it declares phospholipids, the divisor is the phosphatide fraction. If it declares PC, the divisor is that one class. Three claims, three denominators. A worked example makes the arithmetic concrete. If the label claims 250 mg phospholipids, a 60% powder supplies it in about 417 mg, a 70% grade in about 357 mg and a 95% deoiled powder in about 263 mg. For a 100 mg PC claim, a lot at 25% PC needs about 400 mg of lecithin, while a 90% PC fraction needs about 111 mg. Those are worked examples, not catalog figures; the certificate supplies the divisor. A carrier changes the arithmetic once more. The lecithin share of a carrier-supported powder and its AI figure are two different percentages, and the label has to state which one the dose is built on. Nor is the AI figure a PC figure: a powder sold as “60% lecithin” is not a 60% PC ingredient. ## Writing the grade specification Write six blocks into the grade specification: identity (sunflower lecithin, Helianthus annuus, CAS 8002-43-5, E322 grade where the additive route applies); composition (AI, phospholipids with the factor, class profile); condition (moisture, acid value, peroxide value); contaminants (metals, microbiology, residual solvent); labelling (source statement, non-GMO statement, organic certificate where claimed, carrier); and the physical form with particle size and bulk density for a powder. Name the method and the basis next to each number, and do not carry a fluid limit across to a powder. The COA page shows where each result belongs; the identity page shows the source checks. ## When another material is the right purchase A soy-based formula with no allergen constraint can use soy lecithin, which is the established material for that route; the two sources are different products, not interchangeable grades. A PC claim above what lecithin carries needs a PC fraction, not more lecithin. A clear solution needs a different ingredient, because lecithin disperses and clouds. A soy-free label is not solved by a grade change on this page. It needs the source record and the line statement described on the sunflower versus soy comparison. The product page lists the catalog grade; the MOQ page lists the packs; the stability page covers storage for each form; the methods library describes the assays; release is explained on the quality page. ### 02.1 Sunflower lecithin vs soy lecithin: the source, the allergen and the label URL: https://nutrition.rainwoodbio.com/products/fatty-acids/sunflower-lecithin/grades/sunflower-lecithin-vs-soy-lecithin/ Reviewed: 2026-11-20 Sunflower lecithin and soy lecithin share the legal name lecithin, the CAS number 8002-43-5 and the E322 additive entry, but they come from different plants. The emulsifier function is similar; the fatty acid profile, the sterol pattern, the allergen declaration and the evidence behind a soy-free claim are not. One is not a grade of the other, and a switch between them is a change of source, not a change of one specification line. In one lineThe two lecithins share a name, a CAS number and an additive entry, but not a plant; the allergen declaration follows the source, and a soy-free claim follows the source record. ## One name, two plants Lecithin is a class name, not a plant name. The commercial material is a mixture of phosphatides obtained from a vegetable oil gum; soy and sunflower are the two large vegetable sources, and both are sold as lecithin, both carry CAS 8002-43-5, and both fall under E322 in the EU. The additive entry does not distinguish them, which is why the source belongs in the specification and, for clarity, on the label. The similarity ends at the name. The two gums have different fatty acid profiles, different sterol patterns and different phospholipid class ratios, and the seed behind each has its own supply chain. A purchase order that says “lecithin” without the source has not chosen either material. ## What the analysis can tell apart Sunflower lecithin and soy lecithin side by side | Property | Sunflower lecithin | Soy lecithin | Source plant | Helianthus annuus | Glycine max | CAS number | 8002-43-5 | 8002-43-5 | Dominant fatty acids | Linoleic, or oleic in high-oleic seed | Linoleic and oleic | Alpha-linolenic acid | At or below about 1% | Several percent | Sterol marker | Delta-7-stigmastenol | Higher campesterol and stigmasterol shares | Phospholipid class pattern | Commonly a higher PI share and a lower PE share | Commonly a higher PE share | EU additive entry | E322 | E322 | Allergen listing | Not named in Annex II or FALCPA | Named in both The fatty acid profile is the quickest check. Alpha-linolenic acid is present in soy lecithin at several percent and at or below about 1% in sunflower, so a profile that shows a clear alpha-linolenic peak is not a sunflower lot. The sterol pattern settles cases where the fatty acid figures have been blended toward a target, and the class pattern supports the reading without proving it on its own. A high-oleic sunflower seed shifts the profile again: oleic acid rises and linoleic falls. That is still sunflower, but it is a different seed type, and a certificate that reports only “sunflower” does not say which one was used. ## The allergen rule: soy is declared, sunflower is not The allergen rule follows the source. Soy is a major food allergen in the US under FALCPA and in the EU under Annex II of Regulation (EU) No 1169/2011. Soy lecithin is not covered by the exemption for fully refined soybean oil, so a soy-derived lecithin is declared, and in the EU the allergen is emphasised in the ingredient list in the usual way. As of this review, sunflower is not named in either list, so sunflower lecithin does not carry the same mandatory declaration. That does not make the two interchangeable for an allergic consumer. The declaration is a regulatory duty tied to the listed allergen, and the absence of a duty is not a guarantee about a particular line. The source record, not the ingredient name, is what a buyer checks. ## What a soy-free claim actually requires “Soy-free” is a claim about absence, and the plant source is only the first fact behind it. The rest is the line: whether the sunflower seed was crushed and degummed on equipment that also handles soy, whether silos and conveyors are segregated, how the line is cleaned between campaigns, and whether the seed was grown in rotation with soy. A manufacturer's allergen statement should address those points rather than repeat the botanical name. Analytical support has limits. A soy-specific protein test can be run on the finished lecithin, but the result depends on the extraction and on the detection limit, and a refined phospholipid fraction carries little protein. Ask for the method and the limit beside any “not detected” line, and take the line statement as the primary evidence. The buyer's regulatory team checks the claim wording for the destination, because “soy-free” does not have one definition across markets. ## What goes on the label In the EU, the ingredient list names the source: “sunflower lecithin” is unambiguous, and “lecithin (E322)” is the additive form. For a soy source the declaration is mandatory and the allergen is emphasised. The source name is also what the consumer uses to check the product against a dietary choice, so a generic “lecithin” is a poor label even when it is legally sufficient. In the US, the ingredient statement carries the source name. In a supplement, a lecithin used as an emulsifier can sit in the other-ingredients statement, while a lecithin marketed as a dietary ingredient belongs in the Supplement Facts panel. A soy source triggers the FALCPA declaration; a sunflower source does not. The label has to match the certificate and the market file, not the name on the purchase order. ## What changes when you switch Switching source is a change control. The emulsifier role is similar, but the class pattern differs, so the amount needed to stabilise a given emulsion can move. The fatty acid profile changes the oxidation behaviour, and the seed type adds another variable on the sunflower side. The allergen declaration, the source statement and any soy-free claim all have to be rebuilt, and the label and the customer's specification have to be reissued. Switch when the soy allergen is a constraint on the finished product, when the brand wants a non-soy source, or when the supply plan calls for it. Keep soy lecithin when the formula, the customer and the market file are already built around it and no allergen constraint applies. Do not switch to solve a grade problem: a PC claim or a clear solution needs a different material, not a different plant. The catalog specification for this source is on the sunflower lecithin product page; the soy material is on the lecithin product page; the source tests are on the identity page; the allergen and additive file is on the compliance page; the assays are described in the methods library; release is on the quality page. ### 03 Sunflower lecithin fails by hydrolysis and oxidation; the pack sets the rate URL: https://nutrition.rainwoodbio.com/products/fatty-acids/sunflower-lecithin/stability/ Reviewed: 2026-11-20 Hydrolysis and oxidation are the two reactions that age sunflower lecithin. The first lifts the acid value, and moisture plus heat accelerate it; the second lifts the peroxide value, darkens the colour, and is driven by oxygen, light and trace metals. In a standard linoleic-rich grade the oil fraction is the oxidation-prone part, so the pack and the store decide the pace. In one lineSunflower lecithin fails in two ways, hydrolysis and oxidation; moisture and heat drive the first, oxygen and light the second, and the pack decides how fast either runs. ## The dry material: moisture, caking and the headspace Powder and fluid fail differently. A powder takes water from the air, becomes tacky, then cakes; the water dilutes the acetone-insoluble figure on an as-is basis and gives hydrolysis a medium. A fluid exposes its surface at the drum headspace and at every transfer; that surface oxidises and darkens first, and each opening restarts the exposure. Moisture at ≤1.0% is a gate at release, not a promise for the months after. Close the pouch after sampling, keep the drum headspace to a minimum, and write the opening date on the label. Desiccant helps a good seal but does not replace one; a nitrogen blanket is a request, not a standard feature. A pack moved out of the cold should be allowed to warm before it is opened, so condensation does not form on the powder. ## The aqueous dispersion: the least stable format Lecithin does not dissolve in water. Its phosphatides take up water and organise into lamellar or vesicular structures; that behaviour is the emulsifier function, and it is also why a clear drink is the wrong target. Once dispersed, the material is still exposed to hydrolysis, to oxidation and to microbial growth. An emulsion adds process variables. Homogenisation energy, droplet size, pH and the preservative system each change the rate. Separation or creaming may end the product's life before any chemical number moves, so the test has to run on the finished emulsion rather than on the raw powder alone. ## The stresses that move a lot Factors that move sunflower lecithin during storage | Factor | Effect | Control | Moisture | Hydrolysis, caking, as-is dilution | Sealed pack; dry store; desiccant as support | Heat | Faster hydrolysis and darkening | Cool store; controlled drum heater | Oxygen | Oxidation of the oil fraction | Small headspace; sealed pack; nitrogen on request | Light | Oxidation and colour change | Opaque or foil pack; dark store | pH | Hydrolysis in aqueous systems | Validate the matrix pH; avoid extremes | Trace metals | Catalysed oxidation | Avoid iron and copper contact; chelator in the formula | Microorganisms | Growth in an aqueous dispersion | Hurdle technology; validated hold time | Seed type | Linoleic-rich oil oxidises faster than high-oleic oil | Match the grade to the shelf-life target The factors reinforce one another. An open pouch in a warm, damp store brings moisture and heat together; an emulsion in clear glass at neutral pH brings oxygen, light and water together. The question worth asking is not whether the material is stable in general, but how many months this pack keeps this lot inside the specification. ## Designing the stability study Use three warehouse conditions and one stress arm: 25 °C at 60% RH, 30 °C at 65% RH, 40 °C at 75% RH, and a light-exposure arm, because a dark chamber does not exercise the photochemical route. Test acetone-insoluble matter or phospholipids, acid value, peroxide value, moisture, appearance and microbiology at each point, and add a functional test for an emulsifier grade. Tie every result to a pack and a lot family. A page that says “stable” without data is not a stability file, and a result from another pack says nothing about the pack you buy. The 1 kg pouch, the 25 kg drum and a fluid pail differ in headspace and in how often they are opened. ## How the finished formula shifts the risk A capsule fill avoids bulk water but not humidity; moisture moves between shell and fill, and the acid value can drift inside a sealed capsule. A softgel holds little headspace, though its shell is not a perfect oxygen barrier. An oil blend normally needs an antioxidant and often a chelator, and its headspace is part of the design. An emulsion carries the most variables: pH, heat, oxygen and shear. An overage is a decision supported by data on the finished matrix. It cannot compensate for a pack that leaks moisture, and it belongs in the formula, not in a verbal agreement with production. ## Assigning a retest period There is no one shelf-life figure that covers every form. The retest interval is set in the specification, justified by data for the pack, and reviewed when the seed source, the form or the pack changes. Once the interval has passed, test the retained sample again before extending use; a bulk figure does not transfer automatically to a repack. Pack sizes are on the sunflower lecithin product page. The COA page covers release testing, the MOQ page covers ordering units, and the methods library describes the assays. Release itself is explained on the quality page. ### 04 Sunflower lecithin: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/fatty-acids/sunflower-lecithin/moq/ Reviewed: 2026-11-20 The MOQ for sunflower lecithin is 1 kg, supplied as a 1 kg foil pouch; the bulk pack is a 25 kg fiber drum. The catalog lead time is 1–7 days from confirmation to dispatch. A quotation is only comparable when it names the source, the acetone-insoluble or phospholipid figure, the form and the source statement, because a fluid and a powder are different lines even when both are called sunflower lecithin. In one lineOne kilogram is the minimum because the smallest order still has to be a traceable lot with a certificate, a retained sample and a pack that arrives intact. ## Why one kilogram is the minimum One kilogram is the smallest unit that can be a lot. It can be sampled, tested, retained and shipped without being split, and it leaves enough material for a bench trial and a source check. A smaller quantity is usually cut from a larger lot, and that cut weakens the link between the pack, the certificate and the retained sample. The 25 kg drum is a production unit rather than a trial unit. It cuts handling per kilogram, but it also commits inventory and invites more openings. A hygroscopic powder or a fluid suffers at every opening, so the better pack is the one the line can finish before the material drifts. The form decides the container before the quantity does. A powder travels in a pouch; a fluid needs a rigid pack that closes properly; and the 1 kg foil pouch is not a universal pack for both. ## Packs and formats Standard sunflower lecithin packs | Pack | Net weight | Form | Notes | Foil pouch | 1 kg | Powder | Light and moisture barrier; reseal after opening | Fiber drum | 25 kg | Powder | Inner liner; lot code on drum and liner | Rigid drum or pail | On request | Fluid | Headspace and seal; record the opening date | Carrier-supported powder | On request | Powder | Carrier declared; bulk density changes The catalog form is a powder; the fluid is quoted on request. A carrier-supported powder is not a packing variant but a separate specification, since the carrier moves the dose weight and must be named on the label. ## From order to dispatch One to seven days covers confirmation to dispatch for the catalog pack. Transit, customs and the customer's own release come after that window, and a fluid pack or a custom powder adds time before dispatch. Ask for the dispatch date as well as the lead time. The lot documents should travel with the lot. A certificate that arrives after the material sits in quarantine and delays the first batch. ## Building a comparable quotation A sunflower lecithin quotation is comparable when six things are on it: - The material. Sunflower lecithin, the seed type where a claim depends on it, and the AI or phospholipid figure. - The release lines. Moisture, acid value, peroxide value, class profile, metals and microbiology. - The form and pack. Powder pouch (1 kg), powder drum (25 kg), fluid pail or carrier-supported powder. - The delivery terms. Destination country, delivery point and Incoterm. - The document set. COA, specification, SDS, source statement, non-GMO statement, solvent declaration and, where claimed, the organic certificate. - The use and market. Supplement or food, and the destination market for the finished product. Without the first two items, two quotations cannot be compared. Terms are quoted per order, not printed on this page. ## What the 1 kg pouch has to prove The 1 kg pouch is the unit we qualify. Run AI matter, phospholipids, moisture, acid value, peroxide value, metals and microbiology on it, and keep a portion of that same pouch as the retained sample. The lot identifier on the pouch should also appear on the certificate and on the quotation. A bench split is a repack. Label it as one and do not assume the production drum will match a split taken from another lot, particularly where the source statement is part of the order. ## What to agree before the first shipment Four things belong in writing before the first shipment: the specification revision, the certificate that releases each lot, the retained sample, and the retest interval. Add a change-control procedure, and say what a change of seed type, form or pack requires, because each can move the fatty acid profile, the dose weight and the source statement. A return should be settled by testing the retained sample jointly. Name the referee laboratory in advance so that a disagreement does not become a delay. Start with the sunflower lecithin product page for the catalog specification. Release tests are described on the COA page; the market file is handled on the compliance page; the source comparison is on the sunflower versus soy page. Testing and release are described in the methods library and on the quality page. ### 05 The regulatory file for sunflower lecithin URL: https://nutrition.rainwoodbio.com/products/fatty-acids/sunflower-lecithin/compliance/ Reviewed: 2026-11-20 Sunflower lecithin is a lecithin under the EU additive entry E322 and a lecithin under the US GRAS regulation at 21 CFR 184.1400. The specification covers the lot; the regulatory file covers the route, the limits and the label for the destination. Because the source is not soy, the soy allergen declaration does not follow from the ingredient, but the source record and the destination route still have to be confirmed by the buyer's regulatory team. In one lineThe specification describes the lot; the regulatory file shows the additive entry, the limits and the source statement that the destination requires. ## The three parts of the file Three different records sit inside a sunflower lecithin file, and they are often filed as if they were one. The specification says what the material is and which limits apply. The certificate and the test results show what a particular lot measured. The market route — the additive or ingredient basis, the label and the claim rules — is a third record, built for the destination. A folder with only the first two supports purchasing, not a regulatory review. The source statement belongs in all three. E322 does not distinguish sunflower lecithin from soy lecithin, so the plant source is a labelling and purchasing fact rather than an additive one. Keep the source statement, the allergen or line statement, the non-GMO statement, the origin record and the residual-solvent declaration in one version-controlled set. ## European Union E322 is listed in Regulation (EC) No 1333/2008, with purity criteria in Commission Regulation (EU) No 231/2012. The lecithin entry sets the acetone-insoluble minimum, the acid-value and peroxide ceilings, a loss-on-drying limit, and the ceilings for arsenic, lead and mercury; the table below reads the catalog against those limits. The hydrolysed version has its own entry conditions, including a lower AI minimum and a higher acid-value ceiling. Labelling runs on a different instrument. Soy appears in Annex II of Regulation (EU) No 1169/2011, and the refined-oil exemption in that annex does not extend to lecithin, so a soy-derived material must be declared. Sunflower does not appear in the annex as it stands; naming it in the ingredient list is nevertheless the clearest practice. A GMO source brings Regulation (EC) No 1829/2003 into the file, and food supplements add Directive 2002/46/EC. The consolidated texts are the ones to check, since these instruments are amended. ## United States In the United States, lecithin is affirmed as GRAS at 21 CFR 184.1400, which sets current good manufacturing practice as the condition of use and incorporates the Food Chemicals Codex monograph by reference. The affirmation belongs to the ingredient; it does not clear a finished product, its dose or any claim. FALCPA lists soy among the major food allergens, and soy lecithin is not covered by the refined-oil exemption, so a soy-derived lecithin is declared. As of this review, sunflower is not on the FALCPA list. In a supplement, a lecithin used as an emulsifier can appear in the other-ingredients statement; a lecithin marketed as a dietary ingredient belongs in the Supplement Facts panel. The placement follows the role, not the name. ## The catalog against the additive specification Sunflower lecithin: catalog limits and the EU E322 specification | Parameter | Catalog | E322 specification | Acetone-insoluble matter | ≥60.0% | ≥60.0% | Acid value | ≤30 mg KOH/g | ≤35 mg KOH/g | Moisture or loss on drying | ≤1.0% moisture | ≤2.0% loss on drying | Peroxide value | — | ≤10 | Lead | ≤3 mg/kg | ≤2 mg/kg | Arsenic | ≤2 mg/kg | ≤3 mg/kg | Mercury | ≤0.1 mg/kg | ≤1 mg/kg | Cadmium | ≤1 mg/kg | — Read the table line by line. The catalog is tighter on acid value, moisture, arsenic and mercury and matches E322 on acetone-insoluble matter; it is looser on lead, where 3 mg/kg is allowed against the E322 limit of 2 mg/kg. Peroxide value is not a catalog gate and is capped at 10 in E322. The moisture comparison is not exact, because the catalog limits moisture while E322 limits loss on drying, so the method must be printed beside the result. ## Claims and the label An emulsifier is a function, not a health claim, and lecithin's description belongs on the functional side. In the EU, health claims are governed by Regulation (EC) No 1924/2006; a choline claim rests on the choline content of the finished product and its own conditions, not on the lecithin weight. In the US, structure/function wording is reviewed separately and must be truthful and not misleading. “Soy-free” is a claim about absence, so it needs evidence about the line as well as the plant. The source record and the manufacturer's line statement are the starting point, and the buyer's regulatory team checks the wording for the destination. Nothing on this page is a disease-related claim, and no certificate can authorise one; claim review belongs to the label, not to the specification. ## Documents to keep with the lot The lot file should contain the specification version, the certificate, the safety data sheet, the source statement naming Helianthus annuus and the country of origin, the allergen or line statement, the non-GMO statement, the residual-solvent declaration and, where the additive route applies, an E322 compliance statement. Add contaminant and microbiological results, the organic certificate where claimed, and any halal or kosher certificate the market needs. Missing documents should be named before the order. A gap found at the port costs time, and a statement without a date cannot show that it reflects the current specification. ## Before the order is placed - The specification revision, CAS 8002-43-5 and the sunflower source are recorded. - Quotation, specification and certificate all describe one grade and one form. - Certificate, technical data sheet and safety data sheet sit in the lot file, with the source, allergen, non-GMO, origin and solvent declarations. - Each certificate line is compared with the catalog and, where E322 applies, with the additive entry. - The label names sunflower lecithin and does not carry a soy-free claim that the source record cannot support. - The destination route and the claim have been approved by the buyer's regulatory team. For the catalog specification, start with the sunflower lecithin product page. The COA page walks through a lot certificate; the identity page sets out the source evidence; the sunflower versus soy page covers the allergen logic. The methods library describes the assays, the quality page covers release, and the EU regulatory note gives the framework reference. ### 06 How we prove a sunflower lecithin lot is the named source URL: https://nutrition.rainwoodbio.com/products/fatty-acids/sunflower-lecithin/identity/ Reviewed: 2026-11-20 Proving a sunflower lecithin lot means proving composition and source at the same time. Acetone-insoluble matter and the phospholipid figure size the phosphatide fraction, the fatty acid and sterol profiles say which plant the material came from, and the class pattern says which lecithin it is. A certificate with only the acetone-insoluble figure has described a quantity, not an identity. In one lineIdentity is composition plus source: acetone-insoluble matter says how much phosphatide is there, and the fatty acid, sterol and class profiles say which lecithin it is. ## Four layers of evidence Four checks carry the identity, and any one of them can fail alone. Paperwork establishes the plant and the grade. A residue measurement establishes how much phosphatide is present. A profile comparison establishes which lecithin it is. A balance check ties moisture, acid value and oil back to the other numbers. Four layers of sunflower lecithin identity | Layer | Question | Test | What it proves | Document | Are the source and grade named? | Name, Helianthus annuus, CAS 8002-43-5, source statement | Paperwork only | Composition | How much phospholipid is present? | Acetone-insoluble matter, phosphorus | The quantity, not the identity | Profile | Which lecithin is it? | PC, PE, PI and PA by HPLC or TLC; fatty acids and sterols by GC | The source and the class pattern | Balance | Is it diluted or oxidised? | Moisture, acid value, peroxide value, oil | Consistency of the numbers Many disputes never get past the first two checks. The name can be right while the powder is a blend, an undeclared carrier or a soy admixture. The later checks are the ones that expose that. ## The ratios that should agree Several numbers on the sheet should agree with one another. The AI figure and the phospholipid figure should be close, once method differences are allowed for; the phosphorus result multiplied by the stated factor should reproduce the phospholipid figure; and the class pattern should look like the source. Fatty acids and sterols then provide two independent checks. Ratios to check on a sunflower lecithin certificate | Ratio | What it checks | What a shift means | Acetone-insoluble matter against phospholipids | Agreement within method uncertainty | A different basis, a factor error or non-phospholipid residue | Phosphorus against phospholipids | The stated factor reproduces the figure | Dilution or an inconsistent factor | Alpha-linolenic acid in the fatty acid profile | Sunflower carries at or below about 1% | Several percent points to soy or a soy blend | Oleic against linoleic acid | Fits the declared standard or high-oleic seed | A seed type that the order did not name | Delta-7-stigmastenol in the sterol profile | Characteristic of sunflower | A sterol pattern that fits soy instead No single ratio is proof. A blend can be tuned to land inside one window, and the alpha-linolenic figure can be pushed down by dilution with a high-oleic oil. Read the ratios as a set: a soy admixture tends to raise alpha-linolenic acid and shift the sterol pattern at the same time. ## Why X-ray diffraction does not identify lecithin XRD cannot identify lecithin. The material is amorphous, so a diffractogram is a broad halo with no sharp reflections, and no reference pattern exists that would label a sample “sunflower lecithin”. A certificate that says “XRD conforms” without naming a phase has given the reader nothing to verify. The method still has a use as a carrier screen. A crystalline diluent produces sharp peaks, and their positions can identify the diluent. That is evidence about what was added to the powder, not about the lecithin itself. FTIR can show the phosphate and ester bands and support the phospholipid assignment, but it does not distinguish sunflower from soy. The class, fatty acid and sterol methods do. The analytical methods library explains what each technique can and cannot prove. ## How substitution shows up Common sunflower lecithin substitutions and the signals | Adulterant | What it does | Signal | Test | Soy lecithin | Changes the source and the allergen record | Alpha-linolenic acid appears; sterol pattern shifts | Fatty acid and sterol GC | Sunflower or soybean oil | Raises the oil fraction and lowers AI | Low AI; high oil; fatty acid profile | AI, fatty acid profile | PC isolate or synthetic PC | Raises PC without the rest of the class pattern | PC high; PE and PI low | Phospholipid profile | Water | Raises moisture and dilutes the as-is AI figure | Moisture high; AI low as-is | Moisture, AI | Undeclared carrier | Lowers the lecithin share of the powder | Ash or silica; crystalline peaks | XRD, ash, carrier declaration | Residual hexane | Solvent left from extraction | Solvent odour; headspace result | Residual-solvent GC Substitution usually follows economics: a cheaper oil, another lecithin, a PC fraction passed off as the whole, or added water. Colour proves little, because a fresh fluid and an oxidised fluid can both be dark. The dependable signals are the AI-to-phospholipid agreement, the class pattern, and the fatty acid and sterol profiles. ## Writing identity into the specification - Name Helianthus annuus as the source, and record the grade, the seed type and CAS 8002-43-5. - Set the phosphatide floor at ≥60.0% for acetone-insoluble matter and ≥60.0% for phospholipids, and print the phosphorus factor beside the second figure. - Require a full class profile (PC, PE, PI and PA) plus the fatty acid and sterol profiles for the lot. - Cap moisture at 1.0% and acid value at 30 mg KOH/g, and report peroxide value without making it a release gate. - Carry the heavy-metal, microbiology and residual-solvent lines listed in the catalog. - Attach the source statement, the non-GMO statement and the carrier declaration. - State the form, the carrier and the particle size for a powder. ## Questions to put to the supplier - Which sunflower source is this lot, which country grew the seed, and is it standard or high-oleic? - What are the acetone-insoluble and phospholipid figures, and which phosphorus factor was used? - Can you provide the phospholipid class profile and the fatty acid and sterol profiles for the lot? - What are the acid value and peroxide value, and how were they measured? - If the source is challenged, is a joint re-test using the retained sample acceptable? Taken together, those five answers make up an identity file. One acetone-insoluble figure on its own does not. For the catalog specification, see the sunflower lecithin product page. The COA page explains where each figure belongs, the grades page compares the forms, and the sunflower versus soy comparison covers the source question. The quality page covers release. ### 01 What the COA for tocopheryl succinate actually contains URL: https://nutrition.rainwoodbio.com/products/vitamins/tocopheryl-succinate/coa/ Reviewed: 2026-11-20 The certificate for a tocopheryl succinate lot reports appearance, identification by HPLC and infrared, assay at ≥95.0% by HPLC, melting point 73–76 °C, loss on drying ≤1.0%, particle size, the heavy-metal panel and microbiology. Those figures are the catalog specification; the batch COA is the document that releases a particular pouch or drum. The ester line has to name d-alpha-tocopheryl succinate, because a certificate that says only “vitamin E” does not say which ester was measured. In one lineA 95% assay is a statement about d-alpha-tocopheryl succinate, and the melting point and loss on drying are what stop that number from being read as any other vitamin E form. ## The certificate as a test report A useful certificate is auditable row by row: method, release limit and a separate column for the measured result. Identification is the row that decides the ester; the assay says only how much of the named ester is present. Identity, assay, solid form and contaminants · tocopheryl succinate | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | HPLC retention and infrared spectrum | Conforms to the d-alpha-tocopheryl succinate reference | Assay | HPLC with UV detection | ≥95.0% | Melting point | Capillary method | 73–76 °C | Loss on drying | Gravimetric | ≤1.0% | Heavy metals (Pb, As, Cd, Hg) | ICP-MS, multi-element | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence screen | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis, 80 mesh | ≥95% through 80 mesh The melting point is a form check rather than a purity assay. A crystalline succinate melts sharply inside 73–76 °C; a depressed or wide range points to moisture, a mixed crystal or a different ester. The infrared spectrum adds the functional-group evidence: the succinate shows an ester carbonyl and an acid group that the acetate does not carry. ## What the 95% measures The assay is the mass fraction of d-alpha-tocopheryl succinate, reported on the as-sold basis unless the certificate states another basis. Because loss on drying is allowed up to 1.0%, a result calculated on the dried material is at most about one percentage point above the same powder as weighed. That correction belongs in the assay row, not a footnote. Nor is 95% the same as 95% tocopherol. The succinate carries a succinic acid group, so the tocopherol fraction is 430.71 ÷ 530.78 = 81.2% of the ester by mass. A 95.0% powder therefore contains about 77.1% tocopherol. In potency terms, 1 mg of d-alpha-tocopheryl succinate is 1.21 IU, so 1 g of the 95.0% powder is 1,149.5 IU. The label conversion is 0.81 mg alpha-tocopherol equivalent per mg of succinate. The assay is run against a d-alpha-tocopheryl succinate reference. It does not measure the acetate, and on an achiral column it does not prove the natural d isomer either. If the natural form is part of the label, ask for chiral separation or specific rotation after hydrolysis. ## Release limit versus batch result The release limit is the acceptance boundary. The result is what the laboratory measured on that lot. Both should appear, in separate columns, with the method beside them. A result column filled with the specification range is a copy of the gate, not a measurement. What the result column should contain | Parameter | Release limit | Result column | Assay | ≥95.0% by HPLC | A measured percentage, with the reference standard and the basis | Melting point | 73–76 °C | The observed range, not only “conforms” | Loss on drying | ≤1.0% | A measured percentage | Heavy metals | Per element | A measured mg/kg figure per element | Microbiology | Counts and absence | A plate count and an absence statement A low assay with a normal melting range points to dilution or a different ester; a normal assay with a high loss on drying points to moisture. A result that sits exactly on a limit leaves no room for the next storage step and deserves a note in the batch record. Particle size is a finishing line: a granulated variant has its own sieve result and should not be released against the 80 mesh line. ## What moves between batches Crystallisation and drying move the melting range, loss on drying and particle size. The assay normally sits above the 95.0% floor, but a lot near that floor and a lot several points above it are both within the specification and behave slightly differently at the balance. Colour is a weak but useful signal. White to off-white covers a wide window, and a cream or tan tint can indicate heat exposure or oxidation while the assay still passes. A shift in the infrared spectrum or a new peak in the chromatogram is stronger evidence than colour. The lot code on the certificate should match the pouch, the drum and the retained sample. A granulated grade belongs on its own particle-size line, not on the 80 mesh line. ## When to order an outside test An independent test earns its place for a new source, a first shipment into a regulated market, a label claim that has to be defended or a disputed result. The useful panel is not a full repeat of the supplier's certificate. It is HPLC assay and infrared identity, melting point, loss on drying, ICP-MS for each metal, microbiology and a sieve check. When the ester is in doubt, add a saponification step: the succinate releases succinic acid, the acetate releases acetic acid, and the free tocopherol releases neither. When the isomer is in doubt, add chiral HPLC or specific rotation after hydrolysis, and add a residual-solvent screen if the process uses one. Ask the laboratory to report its detection limit for each test; a “not detected” line without a limit describes the method, not the sample. Chain of custody matters: the sample tested should be the sample retained. If a result is contested, give the referee the retained sample, the certificate and the agreed specification, and ask for the tests that separate the forms rather than a second run of the same assay. ## What to compare between suppliers Put six lines side by side: exact ester and CAS number; assay result, method and basis; melting point; loss on drying; particle size; and the contaminant and microbiological panels. Two quotations that both say 95% but describe different esters, melting ranges or sieves are not offering the same powder. The second layer is traceability. The certificate should name the manufacturer, the specification version it was released against and the pack the lot went into. A correct certificate can still belong to a different drum, so the lot code has to run through the certificate, the pack and the retained sample. The catalog ranges are on the tocopheryl succinate product page. The identity tests are set out on the identity page; the forms are compared on the grade page; the ester difference is taken further in the succinate versus acetate comparison. The methods library includes the HPLC note, and the release workflow is on the quality page. ### 02 Tocopheryl succinate, acetate or tocopherol: choosing a grade URL: https://nutrition.rainwoodbio.com/products/vitamins/tocopheryl-succinate/grades/ Reviewed: 2026-11-20 The tocopheryl succinate grade supplied here is the crystalline natural d-alpha ester, a ≥95.0% powder at 80 mesh. It is a different grade from tocopheryl acetate, which is an oil or a 50% carrier powder, and from natural tocopherol oil. The grade decision changes the physical form, the IU per gram and the label name before it changes the dose. In one lineThe succinate is the dry, crystalline ester: 95% assay, 1.21 IU per milligram and a label name that the acetate cannot fill. ## Why the grade is an identity decision Vitamin E is a family of related molecules, not one powder with several concentrations. Alpha-tocopherol is the alcohol; esterifying its phenolic hydroxyl with acetic acid gives the acetate, and esterifying it with succinic acid gives tocopheryl acid succinate. The succinate is the monoester, so one acid group stays free. That free group is why the material is a crystalline solid and only sparingly soluble in water. The acetate carries no free acid. It is a viscous oil at room temperature, and the commercial 50% grade puts that oil on a starch carrier to make a dispersible powder. Natural tocopherol is an oil as well. The three forms have different molecular weights, different potency per milligram and different names in an ingredient list. A purchase order that says “vitamin E powder” has not chosen any of them. ## The forms side by side D-alpha vitamin E forms, their identity and their potency | Property | D-alpha-tocopheryl succinate | D-alpha-tocopheryl acetate | D-alpha-tocopherol | CAS number | 4345-03-3 | 58-95-7 | 59-02-9 | Formula | C33H54O5 | C31H52O3 | C29H50O2 | Molecular weight | 530.78 | 472.74 | 430.71 | Physical form | White to off-white crystalline powder | Oil, or 50% carrier powder | Yellow to amber oil | Water solubility | Insoluble | Practically insoluble; the 50% powder disperses | Insoluble | IU per mg | 1.21 | 1.36 | 1.49 | mg alpha-tocopherol equivalent per mg | 0.81 | 0.91 | 1.00 | Label name | D-alpha-tocopheryl acid succinate | D-alpha-tocopheryl acetate | D-alpha-tocopherol The table is the natural d series. The synthetic dl-alpha-tocopheryl acetate has its own CAS number, 7695-91-2, and 1.00 IU per mg; it is a separate grade and not interchangeable with the d forms. The IU and alpha-tocopherol equivalent figures are properties of the molecule, not values a supplier can adjust. ## The powder: crystals, not a carried oil The catalogue grade is ≥95.0% by HPLC, white to off-white, with a melting point of 73–76 °C, loss on drying ≤1.0% and ≥95% through 80 mesh. The crystals are the ester itself. There is no starch carrier and no oil phase, so the assay describes the whole powder rather than the active fraction of a diluted matrix. The material is insoluble in water and soluble in fats and organic solvents. In water it forms a suspension that settles; it does not give a clear solution or a milky emulsion. That makes it a poor fit for a clear beverage, a stick pack or any aqueous system judged by mouthfeel, and a good fit for a two-piece capsule, a direct-compression tablet or a dry blend. The 80 mesh powder is fine and free-flowing; a granulated variant is available on request when a coarser particle is needed. The crystalline form also sets the handling. The powder should stay sealed and dry, because moisture raises the loss on drying and can hydrolyse the ester. Heat near the melting range softens the crystals and can cake a stored drum. Caking does not change the assay at release, but it changes how the powder behaves on the line. ## Dose arithmetic and the fill weight At 1.21 IU per mg, the 95.0% powder carries 1,149.5 IU per gram. A 100 IU serving is 87 mg of powder, a 400 IU serving is 348 mg and a 1,000 IU serving is 870 mg. Those are arithmetic, not recommendations. The alpha-tocopherol equivalent is 0.81 mg per mg of succinate, so 348 mg of the 95% powder delivers about 268 mg alpha-tocopherol equivalent. The comparison with the acetate depends on which acetate pack is on the table. The pure d-alpha acetate ester is 1.36 IU per mg, so at equal ester mass the succinate is about 11% lower in potency. But the standard acetate grade is a 50% powder at about 680 IU per gram, and that powder needs 588 mg for 400 IU. The 95% succinate needs 348 mg for the same 400 IU because it carries no starch. The succinate is less potent per milligram of ester and more concentrated per gram of commercial powder; both statements are true, and the label has to be built on the right one. If the label names the succinate, the fill weight is calculated from the succinate assay, not from a generic “vitamin E 95%” figure. A lot near the floor and a lot several points above it need slightly different weights for the same declared dose. The certificate and the batch record should use the measured assay. ## What to write into the specification - “D-alpha-tocopheryl acid succinate (d-alpha-tocopheryl succinate), CAS 4345-03-3, C33H54O5, molecular weight 530.78.” - “Assay ≥95.0% by HPLC; identification by HPLC retention and infrared spectrum.” - “Melting point 73–76 °C; loss on drying ≤1.0%.” - “Particle size ≥95% through 80 mesh; heavy metals and microbiology as listed.” - “Potency 1.21 IU/mg and 0.81 mg alpha-tocopherol equivalent per mg, to be used in the label calculation.” - “Pack: 1 kg foil pouch or 25 kg fiber drum; destination market and label name confirmed before the order.” A specification that states only the assay leaves the ester, the solid form and the potency factor open. Those are the lines a substitution would have to cross. ## When the succinate is the wrong grade Do not choose the succinate for a clear drink or a high-water-activity gel. The crystals do not dissolve, and the free acid group can shift the local pH as the ester hydrolyses. Do not choose it for a softgel fill that is meant to be an oil, and do not substitute it for an acetate when the label already names the acetate. The reverse substitution is equally unsafe: an acetate powder is not a drop-in for a label that declares the succinate. The permitted-forms list names individual tocopherol and tocopheryl forms, and a natural d-alpha succinate and a synthetic dl-succinate are not the same entry. The buyer's regulatory team confirms the entry that covers the destination before the label is fixed. The product hub carries the catalogue ranges; the vitamin E hub shows the acetate grade; the natural tocopherol page covers the oil; and the succinate versus acetate page sets out the solubility, IU and label consequences. The release tests are on the COA page. ### 02.1 Tocopheryl succinate vs tocopheryl acetate: solubility, IU and the label URL: https://nutrition.rainwoodbio.com/products/vitamins/tocopheryl-succinate/grades/tocopheryl-succinate-vs-tocopheryl-acetate/ Reviewed: 2026-11-20 Tocopheryl succinate and tocopheryl acetate are different esters with different physical forms and potencies. The succinate is a crystalline solid with a free acid group and 1.21 IU per milligram; the acetate is an oil or a 50% carrier powder at 1.36 IU per milligram. A switch changes solubility, fill weight and the label name; it is not a concentration change. In one lineThe succinate and the acetate are different label ingredients: the succinate is a crystalline acid ester at 1.21 IU/mg, the acetate an oil or 50% powder at 1.36 IU/mg, and neither is a drop-in for the other. ## Two esters, two physical identities Both molecules start from alpha-tocopherol and block its phenolic hydroxyl with an acid. Acetic acid gives the acetate; succinic acid gives the acid succinate, a monoester that keeps one carboxyl group free. That free group is the structural reason the succinate is crystalline and only sparingly soluble in water, while the acetate is a neutral oil. D-alpha-tocopheryl succinate and D-alpha-tocopheryl acetate | Property | D-alpha-tocopheryl succinate | D-alpha-tocopheryl acetate | CAS number | 4345-03-3 | 58-95-7 | Formula | C33H54O5 | C31H52O3 | Molecular weight | 530.78 | 472.74 | Physical form | White to off-white crystalline powder | Oil, or 50% carrier powder | Water solubility | Insoluble | Practically insoluble; the 50% powder disperses | IU per mg | 1.21 | 1.36 | mg alpha-tocopherol equivalent per mg | 0.81 | 0.91 | Label name | D-alpha-tocopheryl acid succinate | D-alpha-tocopheryl acetate The table is the natural d series. The synthetic dl-alpha-tocopheryl acetate has CAS 7695-91-2 and 1.00 IU per mg, and the synthetic dl-succinate is a separate material again. An ester comparison that mixes the d and dl series will produce the wrong potency and the wrong label name. ## Solubility decides the dosage form The succinate does not dissolve in water. In a drink it is a suspension that settles, and the mouthfeel is gritty; the free acid group can also shift the pH of a lightly buffered mix as the ester hydrolyses. That is why the succinate belongs in a dry tablet, a two-piece capsule or a powder blend, not in a clear beverage or a stick pack. The acetate is also practically insoluble in water as an oil, but the commercial 50% powder puts it on a starch carrier that disperses in cool water to a milky emulsion. The distinction is not “soluble versus insoluble”; it is “dispersible powder versus settling crystal”. A formulator who needs a cloudy drink can use the acetate powder. A formulator who needs an oil-free solid can use the succinate. In an oil or an organic solvent the succinate dissolves. That can suit an oil suspension or a softgel fill, but the ester is then exposed to dissolved oxygen and to any metal in the oil, so the stabiliser system and the headspace become part of the stability work. Solubility solves the physical problem, not the chemical one. ## IU, fill weight and the 50% powder trap The pure succinate is 1.21 IU per mg and the pure d-alpha acetate is 1.36 IU per mg, so at equal ester mass the succinate is about 11% lower in potency. That is the comparison on a certificate. The comparison on a production floor is different, because the standard acetate grade is a 50% powder, not the pure ester. The 95% succinate powder carries 1,149.5 IU per gram. The 50% acetate powder carries about 680 IU per gram. For a 400 IU serving, the succinate needs 348 mg of powder and the 50% acetate needs 588 mg. The succinate is less potent per milligram of ester but more concentrated per gram of commercial powder, because it has no starch carrier. A 95% acetate powder would need about 310 mg for the same 400 IU. The alpha-tocopherol equivalent closes the arithmetic. A 400 IU dose is about 268 mg alpha-tocopherol equivalent for either natural d-alpha ester, but the mass of powder that delivers it is not the same. The label, the fill weight and the certificate should carry the same ester, the same assay and the same conversion factor. ## Stability follows the form and the matrix Both esters are more resistant to oxidation than free tocopherol because the phenolic hydroxyl is blocked. The succinate is a dry crystal with a loss on drying limit of ≤1.0%; the acetate 50% powder has a starch carrier and a loss on drying limit of ≤5.0%. In a sealed pack, both are stable enough that the pack and the storage condition decide the retest period. Moisture changes the picture. The succinate can hydrolyse to tocopherol and succinic acid, and the crystals can cake. The acetate powder can also hydrolyse and its carrier can pick up water. Neither ester is automatically the more stable choice in a wet matrix: the succinate does not dissolve, but the particles sit in water, and the acetate powder disperses its carrier through the whole mix. The finished formula has to be tested in its own pack. ## What the label has to say In the EU, vitamin E is declared in mg alpha-tocopherol equivalent against a nutrient reference value of 12 mg, and the ingredient list names the form. The succinate converts at 0.81 mg alpha-tocopherol equivalent per mg; the acetate converts at 0.91. The permitted-forms framework names individual forms, and a natural d-alpha succinate and a synthetic dl-succinate are not the same entry, so the buyer's regulatory team confirms the entry for the destination. In the United States, the Supplement Facts panel declares vitamin E in mg alpha-tocopherol against a Daily Value of 15 mg, and the ingredient list names the source, for example “Vitamin E (as d-alpha-tocopheryl succinate)”. In Great Britain the GB register and GB labelling apply, and Northern Ireland follows the EU framework. IU is a potency expression used on specifications and in some markets; the EU label unit is mg alpha-tocopherol equivalent, and the US panel unit is mg alpha-tocopherol. The label name is not interchangeable. “D-alpha-tocopheryl acid succinate” and “D-alpha-tocopheryl acetate” are different ingredients, and “vitamin E” alone does not say which one is in the pack. A label that keeps the IU dose but changes the ester without changing the name is inconsistent with the drum. ## When to choose which Choose the succinate for a dry tablet, a two-piece capsule or a powder blend where an oil is unwanted and the label names the succinate. Choose the acetate 50% powder for a stick pack, a drink mix, a gummy or any process that needs a water-dispersible powder, and choose the acetate oil for a softgel fill. The dosage form usually decides before the potency does. Do not switch on a percentage-for-percentage basis. Recalculate the fill weight from the new ester, the new assay and the new conversion factor, then change the label name and check the destination framework. The tocopheryl succinate hub carries the catalogue ranges; the vitamin E hub covers the acetate grade; the natural tocopherol page covers the oil; and the grade page places the comparison in the wider range. The HPLC method note describes the assay, and the quality page describes the release file. ### 03 Tocopheryl succinate is stable dry; moisture and heat decide the rest URL: https://nutrition.rainwoodbio.com/products/vitamins/tocopheryl-succinate/stability/ Reviewed: 2026-11-20 Tocopheryl succinate is a crystalline ester that keeps longest when dry, dark and sealed. Moisture and heat hydrolyse the ester to tocopherol and succinic acid; light and oxygen attack the chromanol ring; an aqueous dispersion is the weakest format. Shelf life is assigned for the pack and the storage condition, not for the molecule in general. In one lineDry, dark and sealed is the whole strategy: moisture and heat hydrolyse the ester, light and oxygen attack the chromanol, and the pack decides how long either stays slow. ## The powder: moisture, heat and the crystal The catalogue limit is loss on drying ≤1.0%, and that is a release gate rather than a storage allowance. The 80 mesh powder has a large surface area, and an opened pouch exchanges moisture with the room. As the loss on drying rises, the powder can cake, the as-is assay falls and the ester begins to hydrolyse. The free acid group makes the local environment acidic, which is one more reason to keep the moisture out. The melting point is 73–76 °C. A normal warehouse does not approach that range, but a drum left in a hot container, a loading bay or direct sun can push the powder toward it and set a cake that no sieve will fix. The powder should stay in its original foil pouch or a sealed opaque container, off the floor, away from heat and light. A clear jar on a bench is not a storage container for this material. After cold storage, let the sealed pack reach room temperature before opening it. Otherwise condensation forms on the cold powder, and the water goes straight into the loss on drying. ## The solution: low solubility and a reactive ester The succinate is insoluble in water. Aqueous systems therefore contain a dispersion, not a solution: the particles settle, the mouthfeel is gritty and the local environment around each particle can differ from the bulk. In an oil or an organic solvent the ester dissolves, but dissolution does not stop oxidation; it only changes where the oxygen meets the molecule. Water adds hydrolysis. The ester bond between the tocopherol and the succinic acid is cleaved slowly in the presence of moisture, and heat or an alkaline pH accelerates it. The freed acid group can lower the pH of a poorly buffered mix, which changes both the taste and the rate of the next reaction. A ready-to-drink beverage, a stick pack or a high-water-activity gel is the wrong place to learn this. If a liquid format is unavoidable, protect it from light, control the pH, keep dissolved oxygen low and validate the hold time in the actual matrix. A bulk-powder result does not transfer to a beverage, because the water activity, the process heat and the pack are all different. ## What drives degradation Factors that move tocopheryl succinate during storage | Factor | What it does | Control | Moisture | Hydrolyses the ester; raises loss on drying; causes caking | Sealed foil pouch; dry store; desiccant where needed | Heat | Accelerates hydrolysis; softens crystals near the melting range | Controlled store; cool process; no hot container | Light | Oxidises the chromanol; colour and assay change | Opaque or foil pack; dark store | Oxygen | Oxidation at exposed surfaces and in oil solution | Low headspace; sealed pack; inert gas where specified | Alkali and pH | Accelerates ester hydrolysis | Buffer the matrix; avoid alkaline excipients | Trace metals | Catalyse oxidation | Avoid iron and copper contact; check the excipients The factors interact. A warm, humid, bright store is worse than the sum of three separate effects, and an alkaline wet matrix combines hydrolysis with oxidation. The useful stability question is not whether the ester is stable in the abstract, but how long it holds its assay and its appearance in a named pack at a named condition. ## A stability protocol for the ingredient Set the protocol by pack: state the pack, the storage condition, the time points and the tests. Warehouse cover needs 25 °C/60% RH long-term and 30 °C/65% RH intermediate; 40 °C/75% RH accelerates the pack. Add a light-exposure arm, because a dark incubator cannot show a photolytic failure. At every point measure assay, loss on drying, melting point, appearance and identity; microbiology at the first and last point. Where the specification limits free tocopherol or succinic acid, test both — they signal hydrolysis before the assay drops. Report the individual numbers, not a pass/fail line, and name the pack and the lot family. Ask for the stability summary for the pack you will buy. A 1 kg pouch and a 25 kg drum have different headspace, different surface-to-volume ratios and different opening histories. The data belongs to the pack, not to the product name. ## The finished formula changes the answer A tablet adds compression heat, a lubricant and excipients that may donate moisture. A two-piece capsule adds a shell that can exchange water with the fill. A powder blend adds the moisture and pH of every other ingredient. A chewable or a gummy adds water activity and a cook step. The succinate may be stable in the bulk pouch and still fail in a tablet that holds moisture at release. An oil suspension dissolves the ester and removes the gritty particle, but it exposes the molecule to dissolved oxygen and to any metal in the oil. The stabiliser system and the headspace become part of the stability file. In every format, the pack and the matrix are part of the formula, not an afterthought. ## How the shelf life is set Tocopheryl succinate has no single shelf-life figure, because the pack and the storage condition set it. The retest period on the specification applies to a named pack and rests on the stability file for that pack. A number quoted without pack, condition and test panel is a claim. Re-test the retained sample before extending use past the retest period, and never carry a bulk result into a repacked container. Pack options are listed on the product hub; release testing is on the COA page; pack and lead time are on the MOQ page; the assay is described in the HPLC note; and the release workflow is on the quality page. ### 04 Tocopheryl succinate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/vitamins/tocopheryl-succinate/moq/ Reviewed: 2026-11-20 Tocopheryl succinate is sold from 1 kg: one foil pouch is the minimum order, and the 25 kg fiber drum is the bulk pack. Standard packs dispatch in 1–7 days. To quote firmly we need the ester and CAS number (4345-03-3), the specification, quantity and pack, destination and Incoterm, the document set and the intended use. In one lineOne kilogram is the unit because it is the smallest pack that carries its own lot code, COA and retained sample; the 25 kg drum is the production pack. ## Why the minimum is 1 kg A 1 kg pouch covers a bench-scale trial, a retained sample and an independent identity test. It is also a closed commercial unit with a lot code, not a scoop taken from a bulk drum. That is the practical reason for the minimum: the material can be traced from the certificate to the pack to the sample that was tested. A split below 1 kg comes out of a larger lot and is repacked, which adds a handling step and breaks the link between the certificate and the container. The chemistry does not change; the traceability does. At the other end, the 25 kg drum lowers handling per kilogram but ties up inventory and extends the storage period. The minimum is set by the pack that can carry a lot identity, not by a volume target. ## Packs and formats Standard tocopheryl succinate packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, pilot batch | Moisture and light barrier; reseal once opened | Fiber drum | 25 kg | Production scale | Liner inside; lot code on drum and liner | Granulated powder | On request | Dust and flow control | Particle-size spec changes from 80 mesh The standard powder is ≥95% through 80 mesh. Granulation is a different particle-size specification, not a packing choice, and it may add lead time. The foil pouch is the light and moisture barrier; the seal is the weak point once the pouch has been opened, so the remainder should go into a smaller opaque container or be used within the stated in-use period. The 25 kg drum relies on its inner liner for moisture protection. Keep the liner closed, keep the drum off a damp floor and record the date of opening. The lot code on the drum, the liner and the certificate should match. ## Lead time and dispatch Standard packs leave within 1–7 days of order confirmation. The window covers picking, preparing the documents and handing the consignment to the carrier; transit, customs clearance and the buyer's own quality release sit outside it. A granulated grade or a special pack takes longer, and the quotation should list that time as a separate line. Ask for the date the goods will leave, not only the range. A pouch travels as a parcel; a drum goes on a pallet. The Incoterm decides who books the freight and who clears customs. The COA and the other lot papers belong in the same shipment as the material, not in a later envelope. ## What a quotation needs Six items make a quotation firm enough to compare: - Product and form. D-alpha-tocopheryl succinate, CAS 4345-03-3, with the ester written out. - Specification. Assay, melting point, loss on drying, particle size, heavy metals and microbiology. - Quantity and pack. One pouch, one drum, or a granulated grade. - Destination and Incoterm. Country, port or delivery address, plus the trade term. - Documents. COA, specification, SDS, and the market statements the importer requires. - Intended use and market. Supplement, food or other use, and the country of sale. A quotation without the market and the ester is incomplete. The same powder can suit one destination and sit outside the file for another, and the paperwork is part of the offer. Commercial terms are stated on the quotation, not on this page. ## The sample is a lot, not a demonstration Order the 1 kg pack when the powder has to be qualified, not merely seen. Release tests for tocopheryl succinate are identity, assay, melting point, loss on drying and microbiology; run them on the sample and retain a portion from the same pack. The sample lot code, the COA and the quotation must agree, otherwise the exercise is a demonstration rather than a qualification. A trial below 1 kg is a repack from a bulk lot, not the standard foil pouch. It carries its own handling record and lot code, so ask for the split in writing and file that code with the trial results. The powder on the bench and the powder in the production drum can come from different lots even when both meet the same specification. ## Terms to settle before the first order Set out the commercial and quality terms together on the quotation: Incoterm, pack, dispatch window, specification revision, a COA per lot, the retained sample, the retest period and the change route. A quality agreement should settle all of them before the first production order; the same discussion is far harder once a dispute has started. When a lot fails the agreed specification, the retained sample and a joint re-test against the named method decide the dispute, not a photograph of the drum. The quotation and quality agreement should name the referee laboratory, allocate its cost and record both parties' acceptance before the first order; a return based on appearance alone is difficult to defend. The product hub carries the catalogue specification; release tests are listed on the COA page; the compliance page holds the market files; the MOQ glossary entry defines the term; and the logistics page covers shipping and documents. ### 05 Tocopheryl succinate compliance: the file each market needs URL: https://nutrition.rainwoodbio.com/products/vitamins/tocopheryl-succinate/compliance/ Reviewed: 2026-11-20 The tocopheryl succinate grade supplied here is the natural d-alpha ester of vitamin E. Its regulatory file depends on the exact ester and isomer, the destination and whether the finished product is a food supplement or another food category. This page names the frameworks and the documents that belong in the file; the buyer's regulatory team confirms the route for the destination. In one lineThe file has to match the ester, the market and the label: vitamin E is the nutrient, d-alpha-tocopheryl succinate is the ingredient, and the permitted list is form-specific. ## The four checks The first check is the form and the category: which ester and isomer may be used in the product type the brand is selling. A food supplement, a fortified food and a food additive are different categories, and the same vitamin can enter them through different instruments. The second check is the contaminant limit on the product as sold. The third is the label, which has to name the ingredient and declare the vitamin in the required unit. The fourth is the claim, which is reviewed separately from the ingredient. The specification describes the material; the regulatory file shows the route. A COA, a technical data sheet and a safety data sheet do not settle the destination question, and a certificate that says “vitamin E” does not tell the regulatory reader which ester is in the drum. Keep the specification version, the market and the label in one file so the three can be checked together. ## European Union For food supplements, Directive 2002/46/EC Annex II is the framework that names permitted vitamin and mineral substances; Regulation (EC) No 1925/2006 Annex II is the parallel framework for addition to foods. Labelling follows Regulation (EU) No 1169/2011. Vitamin E is declared in mg alpha-tocopherol equivalent, against a nutrient reference value of 12 mg, and the ingredient list names the form. The permitted list is form-specific: it names individual tocopherol and tocopheryl forms, and the natural d-alpha succinate and a synthetic dl-succinate are not the same entry. A generic “vitamin E” statement does not identify either. The conversion from the succinate to alpha-tocopherol equivalent is 0.81 mg per mg, and the label calculation should use that factor with the measured assay. Whether the exact lot is covered for the intended category is confirmed by the buyer's regulatory team against the current consolidated text, as of this review. The EU contaminant framework for food supplements is Regulation (EU) 2023/915. The values below are the usual starting point; the current text and the daily dose decide the finished-product limit. ## United States In the United States, vitamin E is a dietary ingredient and the finished product is regulated as a dietary supplement. The applicable rules include the dietary supplement cGMPs in 21 CFR 111 and the Supplement Facts requirements in 21 CFR 101.36. The panel declares vitamin E in mg alpha-tocopherol against a Daily Value of 15 mg, and the ingredient list names the source, for example “Vitamin E (as d-alpha-tocopheryl succinate)”. The supplier states the basis it relies on for the ingredient, and the buyer confirms that the basis extends to the finished product and the intended use. A structure/function statement is the brand's responsibility and carries the DSHEA disclaimer; a disease claim is not available. Neither the label review nor the claim review is part of the certificate. ## Contaminants and limits Lead, cadmium, mercury and arsenic · food supplements, by market | Element | EU | US | UK | Lead (Pb) | 3.0 mg/kg | No federal maximum; state rules such as Prop 65 may apply | 3.0 mg/kg, retained | Cadmium (Cd) | 1.0 mg/kg | No federal maximum specific to supplements in this review | 1.0 mg/kg, retained | Mercury (Hg) | 0.10 mg/kg | No federal maximum specific to supplements in this review | 0.10 mg/kg, retained | Arsenic (As) | Not harmonised; Member State rules may apply | No federal maximum specific to supplements in this review | Check current UK law The catalogue limits — Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg — are material limits, not product limits. The product limit applies to the supplement as sold, after the powder has been diluted by excipients and divided into doses. Because the powder can be most of the product mass, a 3.0 mg/kg lead result at 95% inclusion contributes about 2.85 mg/kg to the finished product at that inclusion rate. ## Labels and claims Vitamin E has authorised claims in the EU register, and each carries conditions on the wording and on the amount in the product. This page does not reproduce them and does not recommend one. In the US, a structure/function statement needs the DSHEA disclaimer and must not be a disease claim. In Great Britain, the GB register governs; an EU-authorised claim is not automatically available there. The ingredient name is not a claim. “D-alpha-tocopheryl acid succinate” and “≥95.0%” are specification terms, not statements about health. This supplier makes no health claim, and the brand owner is responsible for every statement on the pack. ## The document pack - Batch COA with assay, identification, melting point, loss on drying, particle size, metals and microbiology. - Specification and technical data sheet naming the ester, the isomer and the CAS number. - Safety data sheet in the 16-section format. - Allergen statement that follows the source of the tocopherol; if the starting oil is soy, the statement has to say so, and a soy-free claim needs the source record. - GMO, origin and residual-solvent statements, if the brand's review requires them. - Statement of the regulatory basis for the intended market, and a third-party certificate where one is required. ## Checklist before the first order - Is the exact ester and isomer named in the specification and on the label? - Has the buyer's regulatory team confirmed the framework and the category for the destination? - Do the contaminant results cover the destination limit at the intended daily dose? - Is the alpha-tocopherol equivalent calculated with the 0.81 factor and the measured assay? - Is any claim on the pack authorised with its conditions met, or a structure/function statement with the disclaimer? - Does the document pack name the market it was prepared for? The product hub carries the catalogue specification; the COA page explains the lot certificate; the identity page covers the analytical evidence; the EU regulatory notes and US regulatory notes collect the framework references; and the quality page describes the release file. ### 06 How we prove a tocopheryl succinate lot is the natural succinate URL: https://nutrition.rainwoodbio.com/products/vitamins/tocopheryl-succinate/identity/ Reviewed: 2026-11-20 A lot is d-alpha-tocopheryl succinate when the documents, the HPLC and infrared identity, the melting point and the mass balance agree. The assay alone cannot separate the succinate from the acetate, from free tocopherol or from a diluted powder. The ester and the solid form each need their own evidence. In one lineIdentity is the ester plus the solid: HPLC and IR name the succinate, the melting point confirms the crystalline form, and the mass balance shows nothing else is filling the 95%. ## The five identity layers Paperwork can name the right ester and still leave the material unproven. Each layer in the table answers a different question, and none of them inherits the answer from the one above. A supplier who stops at the first layer has described a document, not a powder. What each identity layer proves, and what it leaves open | Layer | Question | Test | What it proves | Document | Is the ester named? | Name, CAS number, formula, lot code | Paperwork only | Chromatography | Is the molecule the succinate? | HPLC retention and infrared spectrum | The ester, not the solid form | Solid form | Is it the crystalline ester? | Melting point 73–76 °C; XRD where needed | The crystal phase, not the purity | Mass balance | Is it diluted or wet? | Assay, loss on drying, particle size | Consistency of the numbers | Isomer | Is it the natural d form? | Chiral HPLC or specific rotation after hydrolysis | The stereoisomer ## The 1:1 ester ratio and the IU factor Tocopheryl succinate is the monoester: one succinic acid group per tocopherol molecule. The molecular weight difference is 530.78 − 430.71 = 100.07, which is the succinic acid residue. The tocopherol fraction is therefore 430.71 ÷ 530.78 = 81.2% of the ester by mass, and a 95.0% powder contains about 77.1% tocopherol. That ratio produces the potency factors. One milligram of d-alpha-tocopheryl succinate is 1.21 IU, and one milligram is 0.81 mg alpha-tocopherol equivalent. The same powder at 95.0% is 1,149.5 IU per gram. A certificate that reports 95% and a potency far from that figure is describing a different ester, a different isomer or an arithmetic error. The IU line and the assay line have to reconcile. The mass balance catches a blend that the assay misses. If the certificate reports 95% succinate and 1% moisture, the remaining 4% needs a name: related substances, residual solvent or carrier. An unnamed fraction is a question, not a rounding difference. The ratio is not a substitute for the chromatogram, but it is a fast check on the story the certificate tells. ## X-ray diffraction, melting point and infrared The succinate is crystalline, and the melting point of 73–76 °C is a quick form check. A pure lot melts sharply inside that window. A depressed or wide range can mean moisture, a mixed crystal or a different ester. The melting point does not measure purity, and a diluted powder can still show a melting event from the succinate phase; it is one line of evidence, not the whole file. X-ray diffraction answers the solid-state question: is a crystalline phase present, and does its pattern match the reference? It can distinguish the crystalline succinate from an amorphous carrier or an oil, and it can compare lots from two sources. It is not a purity assay and it does not identify the ester or the isomer. Ask for the reference pattern and the detection limit before reading a “match” statement. Infrared spectroscopy adds the functional-group evidence. The succinate shows an ester carbonyl and an acid group; the acetate has the ester carbonyl but no acid group; free tocopherol has the phenolic hydroxyl and no ester carbonyl. A saponification step then separates the acids: succinic acid from the succinate, acetic acid from the acetate. The chromatogram, the infrared spectrum and the melting point are stronger together than any one alone. ## What substitution looks like Routes that put another material in a tocopheryl succinate drum | Route | Why it can pass a quick check | What shows it | Acetate instead of succinate | Same vitamin family, similar white powder | Different HPLC retention; acid group in IR; saponification | Free tocopherol instead of the ester | Same chromanol, similar colour | No ester carbonyl; different retention; potency factor | Dl-succinate labelled as d-alpha | Same retention on an achiral column | Chiral HPLC or specific rotation; IU factor 0.89 versus 1.21 | Dilution with carrier | Assay can still be adjusted into range | Mass balance, loss on drying, particle size | Moisture | Anhydrous assay can look normal | Loss on drying; as-is assay; caking The dl-succinate route is the one a potency check catches first. The synthetic form is about 0.89 IU per mg, while the natural form is 1.21 IU per mg. A certificate that reports the natural potency against a synthetic lot does not reconcile with the assay. The isomer still needs a chiral or rotation test, because the achiral chromatogram cannot see the difference. ## How to write the identity into the specification - “D-alpha-tocopheryl acid succinate (d-alpha-tocopheryl succinate), CAS 4345-03-3, C33H54O5, molecular weight 530.78.” - “Assay ≥95.0% by HPLC, against a d-alpha-tocopheryl succinate reference.” - “Identification by HPLC retention and infrared spectrum; report the chromatogram and the spectrum on request.” - “Melting point 73–76 °C; loss on drying ≤1.0%.” - “Potency 1.21 IU/mg and 0.81 mg alpha-tocopherol equivalent per mg.” - “Particle size ≥95% through 80 mesh; heavy metals and microbiology as listed.” - “No acetate or free tocopherol above the agreed limit; natural d isomer confirmed where claimed.” ## Five questions for the supplier - Which ester and which isomer is the lot, and which CAS number is on the certificate? - Can you provide the HPLC chromatogram and the infrared spectrum, not only the assay percentage? - What are the melting point and the loss on drying for this lot? - Does the IU figure reconcile with the assay at 1.21 IU per mg, and how was it calculated? - If the natural form is claimed, what chiral or specific-rotation data supports it? Five direct answers amount to an identity file. The product hub carries the catalogue specification; the COA page shows where each figure sits on the certificate; the grade page compares the forms; the succinate versus acetate page covers the ester difference; the HPLC note and FTIR note describe the methods. ### 01 What the COA for acetyl-L-carnitine actually contains URL: https://nutrition.rainwoodbio.com/products/amino-acids/acetyl-l-carnitine/coa/ Reviewed: 2026-11-20 An acetyl-L-carnitine certificate reports appearance, identification by HPLC and infrared, assay, specific rotation, loss on drying, heavy metals, microbiology and particle size. It must also name the form, because the catalog material is the hydrochloride and the free base is a different specification. The values below are catalog limits; the batch certificate confirms one lot. In one lineThe assay says how much ester is present; the rotation, the form line and the loss on drying say which molecule and which basis the percentage belongs to. ## The certificate as a test report A certificate is auditable when each row carries the parameter, the method and the release limit. A row that reads “conforms” without a method asks for trust rather than evidence. Read the form first: acetyl-L-carnitine hydrochloride, CAS 5080-50-2, not the free base. Identity, assay and water · acetyl-L-carnitine hydrochloride | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | HPLC retention and infrared spectrum | Conforms to the reference | Assay | HPLC | 98.0–101.0% (basis stated) | Specific rotation | Polarimetry, c=2 in water | −28.0° to −30.0° | Loss on drying | Gravimetric | ≤1.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh Appearance, identification, assay and rotation describe the molecule; loss on drying, metals, microbiology and particle size describe the powder. A high assay with no rotation has answered quantity and skipped identity. ## The assay basis, the rotation and the chloride The catalog pairs 98.0–101.0% with loss on drying ≤1.0%, but the certificate must state whether the assay is on the dried basis or as-is. A lot at 98.0% as-is with 1.0% water calculates to 98.99% dried; half a point of water can cross the lower limit. The basis belongs in the assay row. The specific rotation is the identity figure. It is read at c=2 in water, and solvent, concentration, temperature and path length all affect the result, so a value without those conditions cannot be compared. The window is −28.0° to −30.0°; a partly racemised lot moves toward zero. HPLC does not separate the enantiomers, so an edge value deserves a chiral check. The hydrochloride carries 14.79% chloride by theory, from one chloride in a molecular weight of 239.70. Chloride is not a catalog release line; ask for it when the salt form is disputed, a source is new, or the label names the hydrochloride. A form line and an infrared spectrum alone do not measure the counter-ion. ## Release limit versus batch result The release limit is the boundary; the batch result is what was measured. Both belong on the certificate, in separate columns, with the method beside them. A result column filled with the specification range is not a result. What the result column should contain · acetyl-L-carnitine | Parameter | Release limit | Result column | Assay | 98.0–101.0% on the stated basis | A measured percentage, the basis and the method | Specific rotation | −28.0° to −30.0° | A measured figure with conditions | Loss on drying | ≤1.0% | A measured percentage | Chloride, if specified | Agreed range around 14.79% | A measured percentage and the method | Heavy metals | Per element | A figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement “Passes specification” is a conclusion. The reader should reach it from the numbers: a count plus an absence statement for microbiology, a figure per element for heavy metals. A combined metal total hides the element that matters. ## What moves between batches Water moves first. The hydrochloride is hygroscopic, and loss on drying follows the drying end-point, the packing-room humidity and the liner. A lot can pass the assay and still be wetter than the last one, which appears later as caking and fill-weight variation. Hydrolysis moves second. The acetyl ester can split to carnitine and acetate, faster with water, heat and pH. If the assay method hydrolyses the ester before detection, it measures total carnitine, and a partly hydrolysed lot can still read inside the window; ask for the sample preparation and the free carnitine figure. Rotation moves little, so a full degree of change is a flag. Colour and particle size are the practical variables: an off-white tint or a shift in the 80-mesh fraction changes how the powder runs while the chemistry stays in specification. Low chloride beside a high assay points to free base or a dilution. ## When to order an outside test Order an outside test for a new source, a first regulated shipment, a form claim the certificate does not prove, an edge rotation, or suspected hydrolysis. The targeted panel is HPLC assay with the sample preparation, chiral HPLC, rotation on a fresh solution, chloride, loss on drying and ICP-MS. Ask for detection limits for the chiral method and free carnitine. “Not detected” without a limit describes the method, not the sample. The sample tested should be the retained sample, and the lot code should match the certificate, pack and report. When a result is contested, give the referee the specification and the certificate, and ask for the tests that separate the forms rather than a repeat of the same assay. ## What to compare between suppliers Put six lines side by side: form and CAS; assay with method and basis; rotation with conditions; chloride; loss on drying; particle size and related substances. Two quotations that agree on assay but differ on form or basis are not the same powder. Traceability is the second layer: manufacturing site, lot code and pack date on the certificate, and the same lot code on the pouch, the drum and the retained sample. A correct certificate can belong to another drum. The catalog specification sits on the acetyl-L-carnitine product page. The tests that separate the ester from the parent molecule are on the identity page, and the comparison with L-carnitine is on the level-four page. The parent product is specified on the L-carnitine page; the separation is explained in the methods section and the HPLC note; the release workflow is described on the quality page. ### 02 Acetyl-L-carnitine hydrochloride: form, mesh and grade URL: https://nutrition.rainwoodbio.com/products/amino-acids/acetyl-l-carnitine/grades/ Reviewed: 2026-11-20 Acetyl-L-carnitine is supplied as the hydrochloride, as the free base and in more than one particle size, and those are specification choices rather than trade names. The catalog material is the hydrochloride, CAS 5080-50-2, a white to off-white 80-mesh powder; the free base has its own CAS number, molecular weight and label name. The grade decides the carnitine content per gram, the chloride load, the acidity and how the powder runs. In one lineThe grade question is the salt form and the particle: the hydrochloride, the free base and the mesh change the label, the chloride load and the fill weight. ## Why there is more than one grade Acetyl-L-carnitine is an ester of L-carnitine. The hydrochloride is the common commercial form: a freely soluble salt that is easy to weigh and blend. The free base is the same ester without the chloride, and it is a different chemical entity on paper, with a different molecular weight and a different label name. A purchase order that says only “acetyl-L-carnitine” has not chosen between them. The second axis is physical. The catalog powder is specified at ≥95% through 80 mesh, and a granulated form is available on request. The chemistry does not change with the mesh, but the flow, the dust, the dispersion and the water uptake do. The grade is therefore a form decision and a particle decision, and both belong in the specification before the quotation. ## The hydrochloride and the free base Acetyl-L-carnitine hydrochloride and free base | Property | Hydrochloride (catalog) | Free base | CAS number | 5080-50-2 | 3040-38-8 | Formula | C9H18ClNO4 | C9H17NO4 | Molecular weight | 239.70 | 203.24 | Chloride | 14.79% by mass | None | Carnitine per gram | 0.67 g | 0.79 g | Label name | Acetyl-L-carnitine hydrochloride | Acetyl-L-carnitine | Typical use | Capsules, tablets, powder blends | Where the chloride is not wanted The carnitine figures are stoichiometry, not certificate results: 161.20 ÷ 239.70 = 0.6725 for the hydrochloride and 161.20 ÷ 203.24 = 0.7931 for the free base. A certificate should still report the assay it measured, because the powder may contain water and the assay has a basis. The two forms also differ in what the label must say. In the European Union and the United States, the ingredient declaration has to name the form that is in the pack; “acetyl-L-carnitine” does not cover the hydrochloride if the market requires the salt name, and the hydrochloride does not become the free base because the carnitine figure is close. The declaration, the specification and the certificate should use the same name. ## Particle size, flow and water The 80-mesh specification is finer than the 40 mesh common for many amino acids. A finer powder disperses quickly in a blend and gives a uniform-looking capsule fill, but it also carries more surface, so it picks up water faster and generates more dust. Granulation improves flow and reduces dust, at the cost of a slower dissolution step. The material is hygroscopic. In an open dish it gains water, and in a hopper it can bridge or stick to the dosator. The 80-mesh line is a release specification, not a promise about flow; ask for the bulk density and a flow result if the fill relies on volume. The catalog does not publish a bulk density, so it is a question rather than an assumption. The hydrochloride solution is acidic. That acidity is part of the grade: in a stick pack or a drink it affects taste and the pH of the matrix, and in a capsule it is less visible but still present if the shell or an excipient is pH-sensitive. The free base removes the chloride but not the ester, so the hydrolysis question remains. ## What the grade does to the fill A label that declares 500 mg of acetyl-L-carnitine hydrochloride is built on 500 mg of the salt; the carnitine delivered is about 336 mg, because the salt is 67.3% carnitine by mass. If the label declares 500 mg of carnitine rather than the ester, the powder weight is different: about 744 mg of the hydrochloride. Those are label arithmetic, not dose advice, and the assay and water content are applied on top. Capsules and tablets take the solid. A capsule fill is set by the bulk density and the flow of the blend, and a hygroscopic powder needs a low-humidity dose room and a sealed pack. A tablet needs compression behaviour; the catalog does not publish a compactability figure, so run a trial with the actual blend rather than assume a capsule powder will press. Powder blends and stick packs take the 80-mesh powder because it disperses. The constraint is water activity: a stick pack with a high water activity gives the powder a humid microclimate, and a hygroscopic carrier makes it worse. Granulated material is easier to fill but slower to dissolve; choose it when flow matters more than dispersion. ## What to write into the specification - “Acetyl-L-carnitine hydrochloride, CAS 5080-50-2, C9H18ClNO4, molecular weight 239.70.” - “Assay 98.0–101.0% by HPLC, with the basis stated; loss on drying ≤1.0%.” - “Specific rotation −28.0° to −30.0° at c=2 in water; report the conditions.” - “Chloride about 14.79% by titration or ion chromatography, where the salt form is to be proved.” - “Particle size ≥95% through 80 mesh; granulated on request.” - “Heavy metals, microbiology and the pack as listed on the product page.” We supply the hydrochloride. The free base is a different purchase with a different specification and label, and it should not be substituted without written change control. ## When another grade is the wrong choice Do not choose the hydrochloride when the label names L-carnitine or acetyl-L-carnitine free base; the declared ingredient and the weighed ingredient would differ. Do not choose it for an alkaline matrix where the ester will hydrolyse faster, or for a formula that cannot take the chloride load. The free base is not automatically the answer either: it has its own solubility, pH and stability, and a switch in either direction is a new specification. A granulated grade is the wrong choice when the application needs fast dissolution in a stick pack; the 80-mesh powder is the practical starting point. A finer mesh is not automatically better, because dust and water uptake rise as the particle shrinks. The catalog specification is on the acetyl-L-carnitine product page; the release tests are on the COA page; the water and hydrolysis question is followed on the stability page. The difference from L-carnitine is set out on the level-four page, the parent form is on the L-carnitine page, the analytical methods are collected under methods, and the release workflow is on the quality page. ### 02.1 Acetyl-L-carnitine vs L-carnitine: the acetyl group and the label URL: https://nutrition.rainwoodbio.com/products/amino-acids/acetyl-l-carnitine/grades/acetyl-l-carnitine-vs-l-carnitine/ Reviewed: 2026-11-20 L-carnitine and acetyl-L-carnitine are not the same ingredient at two strengths. The acetyl group adds 42.04 g/mol to the carnitine molecule, makes an ester bond that can hydrolyse, changes the CAS number and the label name, and lowers the carnitine content per gram from 1.00 g to 0.79 g as the free base or 0.67 g as the hydrochloride. A formula built on one cannot be relabelled as the other by changing the number on the panel. In one lineThe acetyl group makes acetyl-L-carnitine a different molecule with its own CAS number, assay and label; it is not an L-carnitine dose under another name. ## The acetyl group changes the molecule L-carnitine is a zwitterion with a hydroxyl group. Acetylation converts that hydroxyl into an ester, and the product is a different substance with its own identity, assay and label. The acetyl group is not a coating or a dilution; it is part of the molecule, and an assay of the ester is not an assay of carnitine. L-carnitine and the two acetyl-L-carnitine forms | Property | L-carnitine | Acetyl-L-carnitine | Acetyl-L-carnitine HCl | CAS number | 541-15-1 | 3040-38-8 | 5080-50-2 | Formula | C7H15NO3 | C9H17NO4 | C9H18ClNO4 | Molecular weight | 161.20 | 203.24 | 239.70 | Carnitine per gram | 1.00 g | 0.79 g | 0.67 g | Acetyl group | None | 42.04 g/mol | 42.04 g/mol | Chloride | None | None | 14.79% by mass | Label name | L-carnitine | Acetyl-L-carnitine | Acetyl-L-carnitine hydrochloride The carnitine figures are stoichiometry: 161.20 ÷ 203.24 = 0.793 for the free base and 161.20 ÷ 239.70 = 0.673 for the hydrochloride. They describe the pure molecule, not a certificate result, which still depends on the assay and its basis. ## The conversion between the labels The molecular weights give the conversion. One gram of carnitine equals 203.24 ÷ 161.20 = 1.26 g of acetyl-L-carnitine free base or 239.70 ÷ 161.20 = 1.49 g of the hydrochloride. A formula that declares 500 mg of carnitine therefore needs about 631 mg of the free base or 744 mg of the hydrochloride. The reverse arithmetic is the one that catches label reviews. A 500 mg dose of acetyl-L-carnitine hydrochloride delivers about 336 mg of carnitine; 500 mg of the free base delivers about 397 mg. If the panel declares the ester, the number is the salt weight and the carnitine figure is supporting information; if it declares carnitine, the powder weight is higher. The two cannot share one number. The assay basis is a second correction. A 99.0% assay on the dried basis is not 99.0% of the powder as weighed, and it is not 99.0% carnitine. Convert with the loss on drying first, then with the molecular-weight factor if the label uses the other basis. Those are label arithmetic, not dose advice. ## The ester bond changes the stability L-carnitine is chemically robust as a dry solid; its practical weakness is water uptake. Acetyl-L-carnitine has the same hygroscopic problem and a second one: hydrolysis to carnitine and acetate, faster with water, heat and alkaline pH. A beverage made with acetyl-L-carnitine is a stability study in its own right; the same beverage made with L-carnitine is mainly a preservation study. Hydrolysis also changes the label claim over time. If the panel declares 500 mg of acetyl-L-carnitine, a lot that loses part of the ester delivers less than the declared amount; the free carnitine rises and the assay of intact ester falls. An overage is a label and stability decision, not a repair for a pack that lets water in. In the dry pack, both forms need a moisture barrier. The hydrochloride is acidic in solution, while the free base has no added chloride but still carries the ester. The pack and the matrix, not the parent molecule, decide which form lasts longer in a given formula. ## What the label has to say The label name follows the molecule. In the EU the ingredient declaration and the national supplement rules require the name of the form in the pack; in the US the Supplement Facts panel names the dietary ingredient. “L-carnitine” does not cover acetyl-L-carnitine, and “acetyl-L-carnitine” does not cover the hydrochloride where the salt name is required. A formula that declares L-carnitine and uses acetyl-L-carnitine has a labelling problem even if the carnitine figure matches, because the ingredient is a different substance. A formula that declares the hydrochloride and uses the free base has the same problem in reverse. The specification, the certificate and the panel should use one name. Quantity is the second label question. The panel can declare the ester or the carnitine, but it must say which; a number without a basis is not a label. ## Two ingredients, two regulatory files The two ingredients have separate files. In the EU, L-carnitine has a documented pre-1997 history, and the novel-food catalogue entry for acetyl-L-carnitine is a separate entry; the catalogue check, the national level rule and the label review are done per ingredient. In the US, both are marketed as dietary ingredients, but the supplement file for one does not automatically cover the other. Do not carry a claim from one to the other. As of this review the EU register carries no authorised health claim for acetyl-L-carnitine; a claim written for L-carnitine is a separate entry and does not transfer. The buyer's regulatory team confirms the route for the exact form and market. Acetyl-L-carnitine is not a stronger L-carnitine; it is a different molecule. The regulatory file should say that in the same words as the label. ## When to choose which Choose L-carnitine when the label names L-carnitine, when the formula needs the highest carnitine per gram, or when the matrix is alkaline and an ester would hydrolyse. Choose acetyl-L-carnitine when the label names the acetyl form and the formula and stability work have been done on that molecule. Neither is a drop-in for the other. A switch changes the mass, the assay, the stability and the regulatory citation, and it needs a new specification, a new label and a new stability study. The catalog specification for the acetyl form is on the acetyl-L-carnitine product page; the parent form is on the L-carnitine page; the release tests are on the COA page; the identity evidence is on the identity page; the market file is on the compliance page. The analytical methods are collected under methods, and the release workflow is on the quality page. ### 03 Acetyl-L-carnitine is hygroscopic and its ester can hydrolyse URL: https://nutrition.rainwoodbio.com/products/amino-acids/acetyl-l-carnitine/stability/ Reviewed: 2026-11-20 Acetyl-L-carnitine is hygroscopic as a solid and hydrolyses as an ester in solution. The dry powder needs a sealed, moisture-barrier pack and a cool store; the solution needs a pH and a heat load that keep the ester intact. Shelf life is assigned from data for the exact pack and matrix, not from the certificate. In one lineThe powder fails on water and the ester fails in alkaline solution; the pack and the matrix decide which of the two arrives first. ## The dry powder: water is the first problem The catalog limits loss on drying to ≤1.0%, which is a release gate, not a storage allowance. The hydrochloride picks up water from the air; the powder softens, cakes and bridges, and the as-is assay falls as the water rises. The ester can also hydrolyse slowly in the solid state when water and heat are present, so a wet lot is not only a handling problem. The pack is the barrier. The 1 kg foil pouch and the 25 kg drum with an inner liner keep water out while they are sealed. An opened pouch folded over is not resealed; the headspace now holds room air, and the powder will equilibrate with it. Keep the original pack closed, use a smaller opaque container for a partial weigh-out, and record the opening date. Temperature matters through the same route: a warm store raises the rate of both water uptake and hydrolysis. A cool, dry store is the ordinary condition; a hot loading bay or a car in summer is not. The material is not specified here as light-sensitive, and the foil pack covers that question in any case. ## The solution: the ester bond is the weak point Acetyl-L-carnitine is reported stable at neutral to acidic pH and unstable above about pH 9, and the rate rises with temperature. The catalog material is the hydrochloride, so a freshly prepared solution is acidic, which is the friendlier side of that window. An alkaline matrix, a buffer at high pH, or a process that adds heat shifts the balance. Hydrolysis produces L-carnitine and acetate. The assay of intact ester falls, the free carnitine rises, and the pH can move as acetic acid is released. A beverage or a stick pack made with acetyl-L-carnitine therefore needs a stability study in the matrix, at the process pH and heat load, not only a bulk-powder result. Pasteurisation or hot fill is a heat load that a powder never sees. Hold time is part of the study. A solution held in a tank for a shift at ambient temperature is a different exposure from one filled immediately; ask for the hold time that was validated, not only the shelf life of the finished pack. ## What drives degradation Factors that move acetyl-L-carnitine during storage | Factor | What it does | Control | Water | Hygroscopic uptake; caking, loss-on-drying rise and as-is assay fall | Sealed foil or lined drum; dry dose room | Heat | Accelerates hydrolysis and water uptake | Cool store; control the process temperature | Alkaline pH | Splits the ester to carnitine and acetate | Keep the matrix acidic to neutral; validate the buffer | Time | Hydrolysis accumulates even at a moderate rate | Assign the retest period from data | Open pack | Room air and humidity enter the headspace | Reseal, use the opened pack first, record the date | Matrix water activity | Creates a humid microclimate in a stick or capsule | Dry the blend; test the finished pack These factors act together. A warm, humid store with an opened pouch is worse than either condition alone, and an alkaline drink that is also pasteurised combines pH and heat. The useful question is not whether the material is stable, but stable in which pack, at which pH, for how long. ## A stability protocol for the pack Run the study on the pack that will be sold. Long-term storage at 25 °C/60% relative humidity, intermediate storage at 30 °C/65% and accelerated storage at 40 °C/75% cover the warehouse and stress the pack. Test appearance, loss on drying, assay, specific rotation, free carnitine, the pH of a standard solution and microbiology at each point. Add two arms that a standard solid study misses: an open-pack arm, where the pouch is opened, folded and stored as a customer would, and a solution arm at the target pH and heat load. Those are the two failure modes that matter for this ester. Time points of 0, 3, 6, 12, 24 and 36 months are a practical starting set. The report should show the individual results and identify the pack and the lot family. A pass statement without numbers does not show a trend, and a trend in free carnitine is the earliest sign that the ester is going. ## Where the formula changes the answer A capsule or tablet starts dry, but the shell and the excipients can move water into the fill; check loss on drying and appearance after storage, not only at release. A stick pack fails at the seal and at the powder's water activity; a pinhole is enough. A liquid combines pH, heat and time, and an alkaline system is the worst case for this ester. An overage does not repair a pack that lets water in. If the label claim has to hold at end of shelf life, the overage is a label and stability decision, and it must be supported by the matrix data. The ingredient's bulk stability is the starting point, not the answer. ## How the shelf life is set We do not publish one shelf-life number for acetyl-L-carnitine, because the pack, the storage condition and the matrix set it. The assigned retest period belongs on the specification and is supported by the stability file for that pack. After the retest period, re-assay the retained sample before extending use; do not carry a bulk figure across to a repacked container. The catalog specification is on the acetyl-L-carnitine product page; the release tests are on the COA page; the packs that carry the barrier are described on the MOQ page. The difference from L-carnitine is set out on the level-four page, the parent molecule is on the L-carnitine page, the analytical methods are collected under methods, and the release workflow is on the quality page. ### 04 Acetyl-L-carnitine: MOQ, packs and ordering URL: https://nutrition.rainwoodbio.com/products/amino-acids/acetyl-l-carnitine/moq/ Reviewed: 2026-11-20 The MOQ for acetyl-L-carnitine is 1 kg, supplied as a 1 kg foil pouch; the standard bulk pack is a 25 kg fiber drum. Lead time is 1–7 days for the standard pack. A firm quotation needs the form and CAS number, the assay basis, the mesh, quantity and pack, destination and Incoterm, and the documents the market requires. In one lineOne kilogram is the smallest pack that keeps a lot identity, and the form, the mesh and the destination are what the quotation has to name. ## Why the minimum is 1 kg A 1 kg pack covers a bench trial, a retained sample and an independent test. It is also small enough to ship as a parcel, which matters when the formula is not fixed. The pack is a lot unit with a certificate; below that, material is split from a larger lot and the original pack identity is lost. The 25 kg drum is the production unit. It reduces handling per kilogram but commits inventory and a longer storage period; for a hygroscopic hydrochloride, the liner and the date of opening matter as much as the drum wall. ## Packs and what each one protects Standard acetyl-L-carnitine packs | Pack | Net weight | Construction | Typical use | Watch | Foil pouch | 1 kg | Foil laminate, heat-sealed | Trial, small batch, retained sample | The seal is the barrier; a folded top is not | Fiber drum | 25 kg | Fiber drum with inner liner | Production batch | The liner keeps water out; close it after weigh-out | Granulated powder | On request | Granulated | Flow and dust control | Dissolution changes; it is a new specification Particle size is part of the pack decision. The catalog powder is ≥95% through 80 mesh, and granulation is a different specification. If the fill needs a coarser or freer-flowing powder, say so before the quotation, because the change moves the lead time. ## Lead time and dispatch The 1–7 day window runs from order confirmation. It covers picking, document preparation and dispatch; it does not include transit, customs clearance or the buyer's quality release. A custom granulation or a non-standard pack adds time, and the quotation should state it separately. Ask for the dispatch date, not only the range. A 1 kg pouch moves as a parcel; the 25 kg drum travels on a pallet, and the Incoterm says who books the freight and who clears entry. The certificate and the lot documents should travel with the pack, not follow it. ## What a quotation needs Six items make a quotation firm enough to compare: - Form and CAS. Acetyl-L-carnitine hydrochloride, CAS 5080-50-2, or the free base, CAS 3040-38-8. - Specification. Assay and basis, specific rotation, loss on drying, mesh, heavy metals and microbiology. - Quantity and pack. Number of 1 kg pouches or 25 kg drums, and whether a desiccant or liner is required. - Destination and Incoterm. The country, port or address, and the trade term. - Documents. COA, specification, SDS, origin, allergen, GMO and any market-specific statement. - Intended use and market. Supplement, food or another use, and where it will be sold. A quotation that says “acetyl-L-carnitine 99%” and a quantity is not comparable with one that names the salt, the basis and the mesh, because the two may describe different powders. Commercial terms belong on the quotation, not on this page. ## The sample is a lot, not a demonstration The 1 kg pack is the qualification sample. Test identity, assay, rotation, loss on drying and chloride before scaling, and keep a retained portion from the same pack. The lot code on the sample, the certificate and the quotation should match. A sample that cannot be traced to a lot is a demonstration. Leave a portion in an open dish overnight to see how it cakes; it is the quickest handling test a buyer can run on a hygroscopic powder. A bench trial below 1 kg is a repack, not the catalog pouch; ask for the split in writing and keep its lot code. ## Terms to settle before the first order Put the commercial and quality terms on the same page: Incoterm, pack, dispatch window, specification version, COA for each lot, retained sample, retest period, change control and the referee laboratory. A change of form, mesh or water limit is a new specification and a new quotation. If a lot misses the agreed specification, the route is the retained sample and a joint re-test against the named method, not a photograph of the drum. The quality agreement should say who pays for the referee and which laboratory both sides accept. The catalog specification is on the acetyl-L-carnitine product page; the release tests are on the COA page; the water and pack question is on the stability page. The forms are compared on the grades page, the parent molecule is on the L-carnitine page, the analytical methods are collected under methods, and the release workflow is on the quality page. ### 05 The regulatory file for acetyl-L-carnitine URL: https://nutrition.rainwoodbio.com/products/amino-acids/acetyl-l-carnitine/compliance/ Reviewed: 2026-11-20 Acetyl-L-carnitine is sold as a food supplement ingredient and as a dietary ingredient, and the regulatory file is built around the exact form, the destination and the finished-product dose. The catalog material is the hydrochloride, CAS 5080-50-2, and the parent L-carnitine is a different ingredient with a different file. Permission, maximum level, label and claim are four separate questions. In one lineAcetyl-L-carnitine and L-carnitine are separate ingredients on the label and in the file; the form, the market route and the daily dose have to agree. ## The instruments behind the file One certificate can be enough in one market and incomplete in another. The table is a map, not a legal opinion; the text of each instrument and the national rule decide a specific product. Which instrument controls what · acetyl-L-carnitine | Market | Main instruments | What they settle | European Union | Directive 2002/46/EC; Regulations 1169/2011, 1924/2006, 2015/2283 and 2023/915 | Supplement status, labelling, claims, novel-food history and contaminants | United States | FD&C Act as amended by DSHEA; 21 CFR 111 and 101.36 | Dietary ingredient status, cGMP and the Supplement Facts panel | United Kingdom | Food Supplements Regulations 2003 and retained food law | Permission and labelling in Great Britain; Northern Ireland follows the EU regime Great Britain applies retained law as of this review, but it is maintained by UK law and can change on a different timetable. Northern Ireland follows EU rules, so an EU-compliant file is the starting point there and a GB-only file is not. ## The European Union Acetyl-L-carnitine is not a vitamin or a mineral, so Directive 2002/46/EC does not harmonise it as a nutrient. It sits among the substances the Directive leaves to national rules; a member state may set a maximum level, require a notification or restrict a form. There is no single EU maximum for the ingredient, and a label built on another country's level is not automatically valid. The first documentary check is the novel-food status under Regulation (EU) 2015/2283. As of this review, the EU Novel Food Catalogue records acetyl-L-carnitine as not novel in food, with a catalogue entry rather than an authorisation; keep the catalogue printout, its date and the form it covers in the file. A catalogue entry is an information tool, not a legal authorisation, and the buyer's team confirms the status for the exact form and use. Labelling follows Regulation 1169/2011 and the national supplement rules: the ingredient name, the quantity per portion and the form. Acetyl-L-carnitine has no Nutrient Reference Value, so a percentage of an NRV cannot be shown for it. ## The United States Acetyl-L-carnitine is marketed as a dietary ingredient. The supplement route runs under DSHEA and the cGMP rules in 21 CFR 111, with a Supplement Facts panel under 21 CFR 101.36. A structure or function statement is allowed with the DSHEA disclaimer in 21 CFR 101.93; a disease claim is not. A conventional food is a different route. The supplement file does not authorise a beverage, and the intended use has to match the filing the buyer relies on. The supplier names the basis it relies on and the document behind it; the buyer checks the finished product and the claim. ## Contaminants and limits The contaminant panel is a finished-product calculation, not only a drum result. The table below is the usual starting point for a food-supplement file; the current destination text and the daily dose decide the final limit. Contaminant limits to confirm for the finished product | Parameter | Typical supplement reference | What the file should show | Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method and the finished-product calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception that applies | Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result and method | Arsenic (As) | Customer or market limit | The agreed limit and the method | Microbiology | Process hygiene and the buyer's specification | Counts and absence statements for the lot EU Regulation 2023/915 sets, as of this review, the lead, cadmium and mercury maxima for food supplements; arsenic has no harmonised EU maximum, so the catalog line is contractual. The catalog sits at the legal line for lead, cadmium and mercury, which leaves no margin for analytical uncertainty or for a higher-dose serving. A lot that passes the powder limit can still fail the finished-product calculation. ## Claims and the label In the EU a health claim needs authorisation under Regulation 1924/2006 and a place on the register. As of this review the register carries no authorised claim for acetyl-L-carnitine; EFSA's 2011 opinion on the cognitive-function claim did not establish a cause-and-effect relationship. A claim written for L-carnitine is a different ingredient and does not transfer. In the US the structure or function route is open with substantiation and the disclaimer, and it does not extend to a disease. The acetyl group is chemistry, not a claim; a sentence about acetyl donation or mitochondrial transport is mechanism language, and it still needs review. This site makes no health claim for the ingredient. ## What the file must contain - A lot certificate with assay and basis, rotation conditions, chloride, loss on drying, metals and microbiology, matching the lot code on the pack. - The versioned specification it was released against, naming the hydrochloride and the mesh. - A safety data sheet, allergen and GMO statements, and a food-contact declaration for the pouch or liner. - A manufacturing site and country-of-origin statement naming the actual producer. - An EU novel-food statement with the catalogue reference and date, and a US dietary ingredient statement. - A residual-solvent statement and a stability summary for the pack, with the assigned retest period. The certificate supports the material, not the claim. A claim revision never reopens the specification, and a change of form, source or site should trigger a new specification and a new market review. ## Checklist before the first order - The form is named on the specification, the certificate and the label, and all three agree. - The destination's national level rule has been checked, not assumed from the EU position. - The contaminant results are converted to the finished-product dose. - The label and the claim have been reviewed for the destination. - The novel-food and dietary-ingredient statements cover the exact form. - The lot code runs through the certificate, the pack and the retained sample. The market instruments are summarised on the EU regulatory page, the US page and the UK page. The release tests are on the COA page, the tests that separate the forms are on the identity page, and the parent ingredient is on the L-carnitine page. The product page carries the catalog specification, the analytical methods are collected under methods, and the release workflow is on the quality page. ### 06 How we prove an acetyl-L-carnitine lot is the hydrochloride URL: https://nutrition.rainwoodbio.com/products/amino-acids/acetyl-l-carnitine/identity/ Reviewed: 2026-11-20 An acetyl-L-carnitine lot is the named material when four lines agree: the document names the hydrochloride and CAS 5080-50-2, HPLC and infrared show the acetyl ester, specific rotation and chiral HPLC assign the L configuration, and chloride and loss on drying close the mass balance. The assay alone cannot separate the ester from L-carnitine, the free base or a dilution. In one lineIdentity is four agreeing measurements: HPLC and IR say the ester, rotation says the L form, chloride says the hydrochloride, and water closes the mass balance. ## The four identity layers A certificate can name the right material and still fail to prove it. The four layers are separate questions, and each needs its own evidence. A supplier who answers only the first has described the paperwork, not the powder. Four layers of acetyl-L-carnitine identity | Layer | Question | Test | Blind spot | Document | What is this lot supposed to be? | Name, CAS number, lot code, specification | Says nothing about the powder | Substance | Is it the acetyl ester? | HPLC retention, infrared spectrum, assay | Cannot assign configuration or salt | Configuration | Is it the L form? | Specific rotation, chiral HPLC | Weak on quantity | Counter-ion and water | Is it the hydrochloride, and is it dry? | Chloride, loss on drying, mass balance | Silent on the enantiomer The order matters. The assay is compatible with several failures on the list, so it is the last question to answer, not the first. ## The chloride and carnitine ratios The hydrochloride has one chloride per molecule. The theoretical chloride is 35.45 ÷ 239.70 = 14.79%. A result near 14.8%, with an assay inside 98.0–101.0%, is consistent with the hydrochloride. A low chloride points to the free base, a dilution or a different salt; a high chloride points to residual hydrochloric acid or another chloride salt. The carnitine figure is the second ratio: 161.20 ÷ 239.70 = 67.25% of the salt is carnitine. The acetyl group adds 42.04 g/mol, about 17.5% of the salt's mass. If the label declares carnitine, that is the conversion factor; if it declares the ester, the assay is the number and the carnitine figure is supporting evidence. Chloride by titration or ion chromatography is not a catalog release line, so it is an additional test. The same is true of free carnitine: hydrolysis is the route by which an acetyl-L-carnitine lot becomes partly L-carnitine, and an assay that measures total carnitine after hydrolysis cannot see it. Ask for the free carnitine figure when the method does not separate the two. ## What X-ray diffraction can and cannot tell you X-ray diffraction reads the crystal lattice. The hydrochloride is crystalline, so a pattern is a fingerprint of the solid form; it can distinguish the crystalline salt from an amorphous dilution or a different crystal form, and it can compare lots from two sources. XRD cannot assign the L configuration. The two enantiomers are isostructural, so a physical mixture of L and D crystals gives the pattern of the L crystal. A racemic compound with both enantiomers in the unit cell can give a different pattern, so XRD may raise a flag; it cannot clear one. It is a fingerprint of the solid rather than a functional-group test: a match to an acetyl-L-carnitine reference supports the substance, but the assignment still rests on HPLC and infrared. Use XRD for the solid-form question and keep it away from the configuration question. A supplier who offers a diffraction pattern as proof of the L form has offered the wrong evidence. Ask for the reference pattern and the detection limit before reading a “match” statement. ## What adulteration looks like Common acetyl-L-carnitine substitutions and the signals | Adulterant | What it does | Signal | Test | L-carnitine base | No acetyl group and no chloride; lower molecular weight | Chloride low; free carnitine high; retention differs | Chloride, HPLC, rotation | D-acetylcarnitine | Same assay response, opposite configuration | Rotation moves toward zero | Polarimetry, chiral HPLC | Propionyl-L-carnitine | A different alkanoyl ester with similar chemistry | Retention and mass differ from the reference | HPLC with a reference, HPLC-MS | Dilution | Lowers assay, chloride and carnitine per gram | Assay and chloride low; loss on drying may shift | Mass balance, chloride | Hydrolysis | Free carnitine and acetate appear | Free carnitine high; solution pH moves | Free carnitine by HPLC, loss on drying Colour is the weakest signal. White to off-white covers many powders, including the free base and a dilution. The stronger signals are the rotation, the chloride figure and the chromatogram, and those are the lines to request when the form is disputed. ## How to write the identity into the specification - “Acetyl-L-carnitine hydrochloride, CAS 5080-50-2, C9H18ClNO4, molecular weight 239.70.” - “Assay 98.0–101.0% by HPLC on the stated basis; loss on drying ≤1.0%.” - “Identification by HPLC retention and infrared spectrum; report the spectrum.” - “Specific rotation −28.0° to −30.0° at c=2 in water; D ester not more than the agreed limit by chiral HPLC.” - “Chloride about 14.79%, with an agreed range, where the salt form is to be proved.” - “Free carnitine not more than the agreed limit; particle size ≥95% through 80 mesh.” Every test on the identity list should appear in the specification. A limit that exists only in a conversation does not survive a supplier change. ## Five questions for the supplier - Is the lot the hydrochloride or the free base, and which CAS number is on the certificate? - What is the specific rotation, with solvent, concentration, temperature and path length? - What is the chloride result, and which method produced it? - What is the free carnitine result, and does the assay measure the intact ester? - Can you provide the HPLC chromatogram, the infrared spectrum and the XRD reference? Five direct answers make an identity file. A single assay percentage does not. The product page carries the catalog specification; the COA page shows where each figure sits on the certificate; the grades page compares the hydrochloride and the free base; the level-four page covers the label consequences. The parent form is on the L-carnitine page, the separation is explained under methods, and the release workflow is on the quality page. ### 01 What the L-arginine HCl certificate reports, line by line URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-arginine-hcl/coa/ Reviewed: 2026-11-20 The certificate for an L-arginine hydrochloride lot reports appearance, identification by IR and titration, assay by titration, specific rotation, loss on drying, the heavy-metal panel, microbiology and particle size. The assay is calculated as the hydrochloride, so a 99.0–101.0% figure is a salt figure: about 82.7% of that mass is arginine. The limits in the tables below are the catalog gates; the batch COA is the document that confirms a particular pouch or drum. In one lineThe assay counts the whole hydrochloride, so a 99.0–101.0% titration result is about 83% arginine and the salt figure must not be read as a dose. ## Reading the certificate line by line A certificate can be audited when every line answers three questions: what was measured, which method produced the number, and which limit the lot was released against. A row that says only “conforms” records a conclusion and hides the evidence. For this material the identification row and the rotation row decide that the powder is the L form of the hydrochloride, and the assay row decides how much of it is present. Identity, assay and moisture · L-arginine hydrochloride | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | IR and titration | Conforms to the reference | Assay, calculated as C6H14N4O2·HCl | Titration | 99.0–101.0% | Specific rotation | Polarimetry, c=2 in 5 M HCl | +21.0° to +23.0° | Loss on drying | Gravimetric | ≤0.5% IR and titration answer different questions. The IR spectrum compares the functional groups with a reference; the titration measures the basic centres of the molecule. Neither test alone shows the L configuration or the water content, which is why the rotation and the loss on drying sit beside them. ## The percentage is a salt percentage The molecular weight of the hydrochloride is 210.66 g/mol, of which 174.20 g is the arginine entity. One gram of salt therefore contains about 827 mg of arginine, and a 100.0% assay means 82.7 g of arginine per 100 g of powder. The catalog window of 99.0–101.0% corresponds to about 81.9–83.5% arginine, before the moisture correction. Loss on drying is the second correction. At 0.5% water, the as-is salt content is 99.5% of the dried-basis figure, and the as-is arginine content falls by the same 0.5%. The certificate should say whether the assay is reported on the dried basis or as-is; the catalog pairs the titration range with a ≤0.5% loss on drying, and that pair is what lets a formulator move between the two. The free base has its own assay, 98.5–101.5% on the dried basis, calculated as the base. The two numbers look similar and mean different things: 99.5% of the hydrochloride is about 82.3% arginine, while 99.5% of the base is about 99.5% arginine. Comparing the two assay figures without the molecular weight is the commonest arithmetic error in a form change. ## The gate and the measured result The release limit defines what the lot had to meet; the batch result records what the laboratory found. Each number needs its own column, with the method named next to it. Copying the range into the result column tells the reader nothing about the lot. What the result column should contain | Parameter | Release limit | Result column | Assay | 99.0–101.0% as the salt | A measured percentage, with the basis and the titrant | Specific rotation | +21.0° to +23.0° | A measured angle, with concentration, solvent and temperature | Loss on drying | ≤0.5% | A measured percentage | Heavy metals | Per element | A measured figure in mg/kg for each element | Particle size | ≥95% through 80 mesh | A measured percentage through the sieve Some rows deserve a second look even when they pass. A rotation just above +21.0° leaves little room for temperature or concentration error. A loss on drying near 0.5% leaves little room for a humid filling room. A particle-size result close to the 80 mesh gate matters most for a capsule line that depends on flow. ## What shifts between lots Moisture is the first mover, because the salt is hygroscopic: a pouch opened in a humid room gains water quickly, and the loss on drying rises while the dried-basis assay stays flat. Colour is the second: white to off-white is a wide window, and a tan or cream tint can follow the drying step or a longer hold. Milling sets the 80 mesh result, so a change of mill or sieve can move the particle-size figure without any change in the chemistry. A genuine L-form lot keeps its rotation inside the window from batch to batch. Because the catalog value is defined at c=2 in 5 M HCl, a certificate that omits the solvent and the concentration cannot be compared with another certificate; the number is only meaningful with its conditions. A drift across lots is more informative than one result at an edge, because it points to a change of source or purification. ## When an outside test earns its place An outside test is worth ordering when the source is new, when the lot is the first into a regulated market, when the form is contested, or when a result sits on a limit. An outside panel should add what the routine certificate leaves out: chloride by ion chromatography or argentometric titration, polarimetry with its conditions, an amino-acid HPLC profile, IR against a reference, ICP-MS and a micro count, beside the titration and the loss on drying. Because arginine has no usable ultraviolet chromophore, the HPLC identity normally needs derivatisation, ion-exchange with post-column ninhydrin, or mass detection. The report should name the technique and the detection limit; a “not detected” line without a limit describes the method, not the sample. The referee should receive the retained sample, the supplier's certificate and the specification, all under one lot code. ## Six lines to compare between suppliers Put six lines side by side: the form and CAS number; the assay with its basis, calculated as the salt; the specific rotation with solvent and concentration; the chloride result; the loss on drying; and the mesh with the pack size. When two offers match on assay but part company on the other five lines, they are not offers for the same powder. Then check traceability: the lot code on the certificate, the pouch or drum, and the retained sample should be the same, and the certificate should name the producer rather than only the trader. The catalog specification is on the L-arginine HCl product page; the free-base comparison is on the L-arginine page; the release workflow is on the quality page; the chromatographic and spectroscopic methods are collected in the methods library; the form arithmetic is worked through on the grades page. ### 02 L-arginine base or L-arginine HCl: choosing the form URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-arginine-hcl/grades/ Reviewed: 2026-11-20 L-Arginine HCl is the monohydrochloride of L-arginine: one molecule of hydrochloric acid per molecule of the amino acid, CAS 1119-34-2, formula C6H14N4O2·HCl and a molecular weight of 210.66. About 82.7% of its mass is arginine and about 16.8% is chloride. The free base is 174.20 g/mol, carries no chloride and gives a pH 10.5–12.0 solution. The two forms are different label ingredients, not two grades of one material. In one lineThe hydrochloride is not a diluted base: it is a separate molecule with its own CAS number, about 83% arginine by mass and a weakly acidic solution, so the dose, the pH and the label move with the form. ## Why the salt is a separate product The hydrochloride exists because the free base is strongly alkaline and takes carbon dioxide from the air. Adding one molecule of HCl protonates the guanidino group, and the resulting salt is still freely soluble in water but gives a weakly acidic solution instead of an alkaline one. That change matters in a capsule, a tablet and a stick pack: the salt does not present the same alkaline surface to an acidic flavour or carrier, and it does not absorb carbon dioxide in the same way. The trade-off is mass. Every gram of salt carries about 168 mg of chloride, so a dose expressed as arginine needs about 1.21 g of salt. The salt is a legitimate material with its own specification; it is not the base with an impurity added, and the base is not the salt with the chloride removed. ## The two forms side by side L-arginine base and L-arginine hydrochloride | Line | L-arginine base | L-arginine hydrochloride | Label name | L-arginine | L-arginine hydrochloride | CAS number | 74-79-3 | 1119-34-2 | Formula and molecular weight | C6H14N4O2 · 174.20 | C6H14N4O2·HCl · 210.66 | Arginine per gram | 1.00 g | About 0.827 g | Chloride per gram | None | About 0.168 g | pH, 5% solution | 10.5–12.0 | Weakly acidic; a range can be agreed on the specification | Water and carbon dioxide | Hygroscopic; forms a carbonate in air | Hygroscopic; no alkaline surface for the same reaction | Assay basis | 98.5–101.5% by titration, dried basis, as the base | 99.0–101.0% by titration, calculated as the salt | Catalog mesh | ≥95% through 40 mesh | ≥95% through 80 mesh Every row changes something in a formula. The molecular weight changes the dose; the chloride changes the taste and the contact materials; the pH changes the blend and the pack; the assay basis changes what the percentage means; the mesh changes the flow. ## What the salt is like to handle The catalog grade is a white to off-white powder with at least 95% passing 80 mesh, which is finer than the 40 mesh base. The finer powder blends more evenly into a small capsule fill and disperses faster in a stick pack, but it also carries more dust and picks up moisture faster because of the larger surface area. Granulated material is available on request when flow and dust are the problem; granulation changes the particle profile, not the chemistry. The salt is freely soluble in water and the solution is weakly acidic. The base at pH 10.5–12.0 forces the formulator to buffer and flavour around an alkaline solution; the salt begins on the acidic side, which is a different formulation problem rather than no problem. The chloride load also matters to the process: a concentrated solution is aggressive to some stainless steels, so the contact materials on the line belong in the trial, not in the maintenance log. ## The dose arithmetic The conversion factor is 174.20 ÷ 210.66 = 0.8269. A label that declares 1,000 mg of arginine needs 1,000 ÷ 0.8269 = 1,209 mg of the salt. A capsule filled with 500 mg of the salt carries about 413 mg of arginine. Read the same arithmetic backwards: 1,000 mg of L-arginine hydrochloride on a label means about 827 mg of arginine in the capsule. The assay basis adds a second correction. A 99.5% assay calculated as the salt is 99.5 × 0.8269 = 82.3% arginine before the moisture correction; at 0.5% loss on drying the as-is figure is about 81.9%. The chloride follows the same mass: 1 g of salt carries about 168 mg of chloride, and 5 g carries about 840 mg, roughly the chloride in 1.4 g of sodium chloride. That is composition arithmetic, not a recommendation, and it belongs in the label and the batch record rather than in a footnote. The fill weight is where the arithmetic meets the machine. A capsule that must deliver 500 mg of arginine needs about 605 mg of salt, which may be a larger capsule size. A stick pack has more room, and the salt is the easier of the two forms to put into an acidic drink mix, but the chloride still arrives with the dose. ## Clauses for the specification - “L-arginine hydrochloride, CAS 1119-34-2, C6H14N4O2·HCl; not the free base.” - “Assay 99.0–101.0% by titration, calculated as the salt; state the basis and the titrant.” - “Specific rotation +21.0° to +23.0° at c=2 in 5 M HCl; state solvent, concentration and temperature.” - “Loss on drying ≤0.5%; chloride reported for each lot where the formula is salt-sensitive.” - “Particle size ≥95% through 80 mesh, or the agreed granulated distribution.” - “Heavy metals and microbiology as on the catalog specification; lot code on the pack, the certificate and the retained sample.” ## When the other form is the right answer Choose the base when the label has to read “L-arginine”, the dose is expressed as arginine, the formula can carry a pH of 10.5–12.0, and no chloride is wanted. The hydrochloride fits when the label names the salt, the matrix prefers a less alkaline ingredient and the chloride can be carried. Neither choice is a substitute for a trial in the real matrix: a sealed acidic pack will still react with the base, and a high-chloride drink will still taste of it. Do not switch forms to fix a flow problem. Flow problems are solved with mesh and granulation, not by swapping the salt and creating a labelling problem. The product hub carries the catalog specification; the L-arginine page carries the free-base specification; the chloride, pH and label comparison takes the narrow question further; the methods library explains the assays; the quality page covers release and retained samples. ### 02.1 L-arginine vs L-arginine HCl: chloride, pH and the label URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-arginine-hcl/grades/l-arginine-vs-l-arginine-hcl/ Reviewed: 2026-11-20 L-Arginine and L-arginine HCl are the same amino acid with and without one molecule of hydrochloric acid. The base is 174.20 g/mol and its 5% solution is strongly alkaline at pH 10.5–12.0; the hydrochloride is 210.66 g/mol, about 82.7% arginine and 16.8% chloride, and its solution is weakly acidic. The form decides the mass per gram of arginine, the pH the formula has to carry and the name the label must print. In one lineOne molecule of HCl changes the mass per gram of arginine, the solution pH and the name the label must carry, so the form has to be chosen before the dose is written. ## The numbers that separate the forms The CAS numbers are different, the molecular weights differ by 36.46 g/mol, and the label name is different. None of these rows is a ranking: each form has its own specification and its own job. The choice belongs to the formula and to the printed label, and the two must agree. L-arginine base against L-arginine hydrochloride | Line | Base | Hydrochloride | CAS | 74-79-3 | 1119-34-2 | Formula | C6H14N4O2 | C6H14N4O2·HCl | Molecular weight | 174.20 | 210.66 | Arginine per gram | 1.00 g | About 0.827 g | Chloride per gram | None | About 0.168 g | pH, 5% solution | 10.5–12.0 | Weakly acidic; a range can be agreed on the specification | Label name | L-arginine | L-arginine hydrochloride ## Dose, fill weight and the chloride The factor is 174.20 ÷ 210.66 = 0.8269. To declare 1,000 mg of arginine, weigh 1,000 ÷ 0.8269 = 1,209 mg of the salt; to declare 500 mg, weigh 605 mg. A 500 mg fill of the salt delivers about 413 mg of arginine. A label reading “1,000 mg L-arginine hydrochloride” therefore declares about 827 mg of arginine, intended or not. The assay basis adds a second correction. The catalog assay for the salt is 99.0–101.0% calculated as the hydrochloride, so a 99.5% result is about 82.3% arginine before moisture, and about 81.9% as-is at 0.5% loss on drying. The base's 98.5–101.5% is calculated as the base, so the two assay figures cannot be compared directly. Put the declared arginine figure, the form, the assay basis and the fill weight in one document. ## Why the solution pH moves The free base carries a guanidino group that is not protonated, and a 5% solution sits at pH 10.5–12.0. An acidic blend neutralises the base, and inside a sealed stick the carbon dioxide has no exit; the pack swells and the drink pH shifts. The base also takes carbon dioxide from the air, forming a carbonate on the surface. The hydrochloride has that guanidino group protonated by the HCl, so the solution is weakly acidic and the surface is not alkaline. It does not form the same carbonate in air, and it does not neutralise an acidic flavour in the same way. It is not inert: a carbonate in the blend can still release carbon dioxide when the salt solution meets it, so “hydrochloride” means less alkaline, not unreactive. Solubility is rarely the deciding factor; both forms dissolve freely. The decision rests on three things: the pH the formula tolerates, the chloride it can carry and the name the label must show. ## What the chloride load means in a formula One gram of the salt carries about 168 mg of chloride, which is the counter-ion of the hydrochloride and not an added ingredient. At a 5 g dose of the salt, the chloride is about 840 mg — roughly the chloride in 1.4 g of sodium chloride. That figure is composition arithmetic, not a recommendation, and it is the number a formulator needs when taste, osmolality or the corrosion of contact materials is being assessed. Chloride also drives the process question. A concentrated solution is aggressive to some stainless steels, so the wetted parts of the line belong in the trial. The salt contains no sodium, so its chloride load is not a sodium chloride load; the two are calculated separately. ## Naming the form on the label In the EU, the ingredient list must name the form as it appears in the specification: “L-arginine hydrochloride” for the salt, “L-arginine” for the base, and the quantity per portion follows the named form. If the drum holds the hydrochloride and the label says L-arginine, the name is wrong and the declared arginine overstates what the powder delivers by about 17%. In the US the Supplement Facts panel gives the amount per serving and the ingredient list gives the source; the two must refer to the same form. L-arginine carries no Daily Value, so the panel shows no percentage. Claims are a separate review in both markets: no authorised health claim for L-arginine appears in the EU register as of this review, and a structure or function statement in the US needs substantiation and the DSHEA disclaimer. ## Choosing the form for the label The base is the right call when the label must read “L-arginine”, the dose is written as arginine, a pH of 10.5–12.0 is workable and chloride is not wanted. The hydrochloride is the right call when the label names the salt, the dose is written as the salt, the matrix prefers a less alkaline ingredient and the chloride is acceptable. Neither form should be substituted for the other without a written change control, a new specification and a label check. The L-arginine HCl product page carries the catalog specification; the L-arginine page carries the free base; the grades page places this comparison in the wider range; the methods library explains the assays; the quality page covers the release file. ### 03 L-arginine HCl stability: moisture, the acidic solution and the pack URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-arginine-hcl/stability/ Reviewed: 2026-11-20 L-Arginine HCl is a hygroscopic powder, and the 0.5% loss-on-drying limit is the line that storage pressure pushes against. In the dry state the salt is chemically stable in a sealed pack; in solution it is weakly acidic rather than alkaline, so the carbon-dioxide reaction that limits the free base does not apply, but heat, moisture, pH and the chloride load still set the shelf life. Any shelf-life number has to come from packed-product data for the exact pack and storage condition. In one lineThe hydrochloride is hygroscopic and acidic rather than alkaline: moisture is the storage risk, heat and pH are the solution risks, and the pack decides how long either stays inside the specification. ## The powder: moisture, caking and colour A sealed 1 kg foil pouch or 25 kg drum at a cool, dry store holds the salt inside its specification for the assigned retest period. The failure mode is the open pack. The 80 mesh powder has a large surface area, so it gains water quickly in a humid filling room; the loss on drying rises, the powder begins to cake, and flow through a hopper or a capsule dosator changes before any chemical result moves. Unlike the free base, the hydrochloride does not form a carbonate from carbon dioxide in the air, because the guanidino group is already protonated. That removes one failure mode and leaves the other: water. A drum liner that is not reseated, a pouch folded rather than heat-sealed, and a desiccant left open all let moisture in without any visible spill. Packaging belongs in the specification, not only in the purchasing file. Colour is a weak but useful signal. White to off-white covers the catalog window, and a cream or tan tint after storage points to a moisture or heat history. It is not a purity result; it is a reason to look at the pack record and the loss on drying. ## The solution: acidic, not alkaline The salt dissolves freely in water to give a weakly acidic solution. That is a different environment from the base at pH 10.5–12.0: an acid–base reaction with an acidic flavour is no longer the main event, and carbon dioxide is not released from the ingredient itself. What remains is the ordinary set of solution risks — heat, pH, oxygen, light and time — plus the chloride. A ready-to-drink process adds a heat load through pasteurisation or hot fill. Arginine can react with reducing sugars under heat, so a sweetened drink is a browning route to test, and the trial should measure colour and pH as well as assay. A concentrated solution also carries a chloride load of about 16.8% of the dissolved solids, which is aggressive to some stainless steels; the contact materials belong in the process trial. ## What drives the change Factors that move L-arginine HCl during storage | Factor | Effect | Control | Moisture | Raises loss on drying; caking; lower as-is assay | Sealed pack; intact liner; low-humidity filling room | Heat | Faster colour change and degradation in solution | Set process time and temperature on the real matrix | pH and acidic ingredients | Shift the solution equilibrium; change taste and colour | Measure pH before and after the heat step | Reducing sugars | Browning with heat in a sweetened drink | Low free-sugar carriers; colour measurement in the trial | Chloride and contact materials | Corrosion of some stainless steels | Check wetted parts; rinse and dry between runs | Light and oxygen | Low direct effect on the solid; solution colour | Opaque pack; low headspace; antioxidant only if justified ## Designing the stability study Run the study on the packed powder, not on a laboratory jar. If both catalog packs will be sold, study both, and include an opened pack to capture pickup in the filling room. Store at 25 °C/60% relative humidity and at 40 °C/75% relative humidity, with a 30 °C/65% relative humidity condition if the destination is hot and humid. Test at the start, at three and six months, and at the end of the intended period. The test panel belongs to the pack: assay, loss on drying, specific rotation, pH of a 5% solution, appearance, mesh and microbiology. Give the individual figures rather than a pass statement, and name the pack and the lot family in the report. Rotation belongs in the panel because it is the chiral check; a change there is a different kind of finding from a rise in moisture. ## Where the finished formula changes the answer In a capsule or tablet, the fill is hygroscopic, so the shell and the excipients can still move moisture into the powder. Check loss on drying and appearance at release and after storage, and keep the 80 mesh flow in mind: a caked fill is a filling problem before it is an assay problem. In a stick pack, the seal is the weak point, and a pinhole is enough to let humid air in; inspect the strip as well as the powder. In a beverage, the salt starts acidic, which is easier on flavour than a pH 11 base, but the heat load, the sugar and the chloride are all part of the trial. A gummy or chew adds water and heat, and the process temperature becomes a stability variable. Every one of these formats needs its own shelf-life data; the bulk pouch does not lend its number. ## Assigning the retest period No single shelf-life figure applies to every pack and every destination. The assigned retest period is supported by the stability file for that pack, and a 24-month period is commonly assigned to the sealed 1 kg pouch and 25 kg drum on the strength of that data. Accelerated data supports the retest period; real-time data at the labelled condition still sets it. The early warnings are a rising loss on drying, lumps or caking, a cream tint, and a pH that has moved from its starting value. Each one is a reason to re-test the retained sample and to read the pack's storage record before extending use. Do not extend a period because the titration still passes: moisture moves the loss on drying and the as-is assay first, and the powder may be outside its flow specification while the chemistry still reads inside the window. The catalog packs are on the product hub; the release tests are on the COA page; the free-base storage behaviour is on the L-arginine page; the ordering options are on the MOQ page. The methods library explains the assays, and the quality page covers release, retest and retained samples. ### 04 L-arginine HCl: MOQ, packs and ordering URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-arginine-hcl/moq/ Reviewed: 2026-11-20 L-Arginine HCl has a 1 kg minimum, supplied as a 1 kg foil pouch; the bulk pack is a 25 kg fiber drum, and granulated material is available on request. Lead time is 1–7 days from order confirmation for the standard pack. A firm quotation needs the form and CAS number, the assay basis, the mesh, the quantity and pack, the destination and the documents. In one lineA kilogram is the minimum because a smaller quantity is a repack, and the lot identity, the retained sample and the certificate no longer travel as one pack. ## Why the first pack is one kilogram A 1 kg pouch covers a bench trial, a retained sample and an independent identity test, and it ships as a parcel without a pallet. It is also enough material to run a dose check: 1 kg of the salt delivers about 827 g of arginine, which is more than most pilot batches need. The pack carries a lot code, so the powder in the trial can be traced to the certificate. The 25 kg drum is the production unit. It reduces handling per kilogram, but it commits inventory and a longer storage period, and it is the pack whose liner and lid have to stay closed. Below 1 kg, a split from a larger lot and a repack are the usual route, which adds handling and breaks the original pack identity. The minimum is set by the pack that can carry a lot identity, not by a volume target. ## Packs, mesh and formats Standard L-arginine HCl packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Particle profile changes; lead time may move The catalog form is an 80 mesh powder: at least 95% through 80 mesh, which is finer than the 40 mesh free base. Granulation is a specification change, not a packing option. Tell us before the quotation if the capsule line or the blender needs a coarser, freer powder; the particle-size line moves with the request. ## From confirmation to dispatch A standard pack is quoted at 1–7 days, counted from the order confirmation. Picking, paperwork and dispatch sit inside the window; freight, customs and the customer's own release sit outside it. A granulated grade or a non-standard pack takes longer, and that extra time is quoted as its own line. Ask for the dispatch date rather than the range alone. A pouch travels as a parcel and a drum on a pallet, and the Incoterm fixes who books the freight and who clears entry. The certificate and the other lot documents should travel with the pack, not follow it. ## Six details a quotation needs A quotation can be compared only when it carries six things: - Product and form. L-arginine hydrochloride, CAS 1119-34-2, written out as the salt. - Specification. Assay calculated as the salt, specific rotation, loss on drying, mesh, heavy metals and microbiology. - Quantity and pack. 1 kg pouch, 25 kg drum, or the granulated variant. - Destination and Incoterm. Where it ships, the port or address, and the trade term the offer uses. - Documents. The lot COA, the specification, the SDS and whatever market statement the importer's file requires. - Intended use and market. Whether the use is supplement, food or other, and the market for the finished product. A quotation that says only “L-arginine” is incomplete, because the base and the hydrochloride share a name but not a specification. This page carries no commercial terms; the offer and the quality agreement carry them. ## A sample that can be traced to a lot The 1 kg pouch is the qualification sample. Before scaling, run identity, assay, rotation, loss on drying, chloride where agreed and microbiology, and retain material from that pack. Sample, certificate and quotation should all carry the same lot code. An untraceable sample is a demonstration, not a qualification lot. A bench trial that needs less than a kilogram is a repack with its own handling record; it is not the catalog pouch and should not be presented as one. Have the split confirmed in writing, and file the split lot code beside the trial data. Two packs built to the same specification can still come from different lots. ## What to settle before the first order Commercial and quality terms belong on one page: the Incoterm, the pack, the dispatch window, the specification revision, a COA per lot, the retained sample, the retest period and the change route. Agree them before the first production order, when the conversation is still commercial rather than adversarial. When a lot fails the agreed specification, the evidence is the retained sample and a joint re-test on the named method, not a photograph of the container. Name the referee laboratory, and who pays for it, before a result is ever disputed. Neither side can defend a rejection that rests only on the look of the powder. The catalog specification is on the product hub; the release tests are on the COA page; the free-base packs are on the L-arginine page. The methods library defines the assays, and the quality page describes the release file. ### 05 The regulatory file for L-arginine hydrochloride URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-arginine-hcl/compliance/ Reviewed: 2026-11-20 L-Arginine HCl is the hydrochloride of an amino acid, so the EU food-supplement directive does not list it in Annexes I and II; permission and any level come from general food law and the member state where the product is sold. In the United States it is a dietary ingredient under the pre-1994 route, and the label must name the hydrochloride rather than “L-arginine” alone. Permission is only the first check: the contaminant limit, the label wording and the claim are separate questions. In one lineThe file follows the salt: the instrument that permits the amino acid, the contaminant limit for the finished product, and a label that names the hydrochloride and its quantity. ## Three markets, three instruments Which instrument controls what · L-arginine HCl | Market | Main instruments | What they settle | European Union | Directive 2002/46/EC; Regulations 1169/2011, 1924/2006, 2015/2283 and 2023/915 | Supplement status, labelling, claims, novel-food history and contaminants | United States | FD&C Act as amended by DSHEA; 21 CFR 111, 101.36 and 101.93 | Dietary-ingredient status, cGMP, Supplement Facts and the disclaimer | United Kingdom | Retained food law, the Food Supplements Regulations 2003 and the Food Information Regulations 2014 | Permission and labelling in Great Britain; Northern Ireland follows the EU Nothing here is legal advice; the buyer's regulatory team signs off against the current text. ## The European Union Directive 2002/46/EC lists the permitted vitamins and minerals and their forms in Annexes I and II; neither list names L-arginine or its hydrochloride. The directive still governs the label particulars, but for an amino acid the permission and the level come from general food law and the selling member state. Maximum levels, notification duties and form restrictions differ by member state, so there is no single EU answer. The novel-food question is separate. The pre-15 May 1997 food history is documented, and at this review the amino acid is not a novel food; the file should show that evidence, not only the conclusion. The label follows Regulation (EU) No 1169/2011 and the supplement particulars; the amount per portion is part of it. No Nutrient Reference Value is set for L-arginine in Annex XIII, so the label cannot carry an NRV percentage. ## The United States In the US the dietary-ingredient route runs through section 201(ff) of the FD&C Act, and that is where the file starts. For an amino acid with a pre-1994 history, the basis is normally the pre-1994 marketing route rather than a new dietary ingredient notification, and the supplier's file should say which basis it relies on. The buyer's obligation is separate. 21 CFR 111 requires an identity test on each component received, and 21 CFR 101.36 sets the Supplement Facts panel. The panel states the amount of L-arginine hydrochloride per serving; with no Daily Value for the amino acid, no percentage follows. A structure or function statement is available with substantiation and the 21 CFR 101.93 disclaimer; disease claims are not. ## Contaminants: specification against law Catalog limits and the EU position for food supplements | Parameter | Catalog limit | EU legal position, as of this review | Lead (Pb) | ≤3 mg/kg | 3.0 mg/kg maximum; the catalog sits at the line | Cadmium (Cd) | ≤1 mg/kg | 1.0 mg/kg maximum; the catalog sits at the line | Mercury (Hg) | ≤0.1 mg/kg | 0.10 mg/kg maximum; the catalog sits at the line | Arsenic (As) | ≤2 mg/kg | No harmonised EU maximum for supplements; the line is contractual Compliance is judged on the finished supplement: a powder inside every limit can still exceed one at a high daily dose or through the other ingredients. The salt also adds mass to the dose, so the calculation uses the salt's contribution to the finished product, not the ingredient result alone. ## Claims and the label name Regulation (EC) No 1924/2006 and its retained UK equivalents require a health claim to be in the register before it is used. At the time of this review, no L-arginine health claim appears in the EU register. A composition statement sits in a different category: “L-arginine hydrochloride 1,000 mg per capsule” describes the product, and the figure has to match the specification and the certificate. In the US, a structure or function statement may be used with the DSHEA disclaimer; the brand owner holds the substantiation, and the route stops short of disease. The claim dossier is kept separately from the material specification. For the salt, the declared quantity is the hydrochloride figure. When the drum holds the hydrochloride but the label says L-arginine, the name fails and the arginine figure is overstated by about 17% of the salt's mass. ## What the file must contain - A certificate for the lot that names the method and basis per result and ties the number to the pack's lot code. - The dated specification version behind the release, with the hydrochloride and the mesh written out. - The SDS, the allergen statement and the food-contact declaration for the pouch and its liner. - A site and origin record that names the manufacturer rather than the trader. - A novel-food position supported by the pre-1997 use evidence. - A US dietary-ingredient statement for the basis relied on. - The stability summary, the retest period and any halal or kosher certificate. - The label artwork, checked against the form named in the specification. ## Checklist before the first order - Name the market, and for the EU the member state of sale. - Make the specification and the label say L-arginine hydrochloride, not the free base. - Check the destination's own level and notification rules, not the EU position alone. - Set every contaminant limit against the legal maximum and record the margin. - Check the declared quantity against the form and the assay basis. - Run every claim through the EU or GB register, or the US substantiation file. - Hold specification, certificate and label at one version and one lot code. The framework references are on the EU, US and UK pages. The catalog specification is on the product hub; the release tests are on the COA page; the free-base label question is on the L-arginine page. The methods library defines the assays, and the quality page covers the release file. ### 06 How we prove a lot is L-arginine hydrochloride URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-arginine-hcl/identity/ Reviewed: 2026-11-20 A lot is L-arginine hydrochloride when four measurements agree: the document names the salt and CAS 1119-34-2; IR and titration match the reference; the specific rotation reads +21.0° to +23.0° at c=2 in 5 M HCl; and the chloride result sits near the stoichiometric 16.8% of the salt. The titration alone cannot separate the salt from the base, the L form from the D form, or the material from a blend. In one lineThe rotation proves the L form, the chloride figure proves the hydrochloride, and the titration only measures how much of the salt is present. ## Four layers, four questions What each identity layer proves and misses · L-arginine HCl | Layer | Test | What it proves | What it misses | Document | Specification, COA, lot code | The lot is described and traceable | Whether the powder matches the paper | Structure | IR against a reference; titration | The functional groups and the basic centres | The counter-ion and the enantiomer | Chiral | Specific rotation at c=2 in 5 M HCl | The L configuration, and a large excess of the D form | A small enantiomeric impurity inside the method's uncertainty | Counter-ion | Chloride by ion chromatography or titration | The hydrochloride, and the chloride-to-arginine ratio | Another anion present at low level | Mass balance | Assay, loss on drying, residue and impurities | Whether the numbers are consistent with one salt | A non-titratable organic at low level Each layer answers a different question. A certificate that reports only the assay has measured the total basic content and called it identity; that is the gap the other four lines close. ## The chloride-to-arginine ratio The stoichiometry is fixed by the formula. One mole of the salt weighs 210.66 g, of which 174.20 g is arginine and 35.45 g is chloride: 82.69% and 16.83% by mass. A lot at 99.5% assay on the dried basis, with 0.3% loss on drying, contains about 99.2% salt as-is and therefore about 16.7% chloride. The expected figure moves with the assay and the moisture, so the comparison is against the lot's own mass balance, not against a fixed number on a template. The ratio catches the two substitutions that a titration cannot. Adding free base raises the arginine fraction and lowers the chloride; the titration, calculated as the salt, reads above the 101.0% ceiling because the base has a lower equivalent weight. Adding sodium chloride raises the chloride and the ash, and dilutes the assay below the floor. A chloride result alone is not proof; chloride beside the assay, the ash and the pH is. pH is the quick supporting check. A solution of the salt is weakly acidic; a blend with the free base moves it up towards alkaline. pH is not a quantitative measure of the blend, because concentration and residual acid move it too, but it tells the analyst which question to ask next. ## X-ray diffraction and the solid state XRD asks whether the solid is crystalline and whether its pattern matches a reference. If the material is a crystalline grade, a pattern that matches the reference supports the solid form; an amorphous halo points to a dilution or a different isolation route. The method can also show a crystalline diluent such as sodium chloride, although the chloride and ash results would normally raise that question first. XRD is not a routine release line here; a conformity statement with no pattern and no reference proves little. Request both when a supplier claims a particular solid form, when a granulated grade behaves unlike the powder, or when a dispute is about the solid itself. Milling changes particles, not the crystal form; settle the question before the specification is signed. ## What substitution looks like Substitutions that can pass a rough check | Substitution | What it changes | Signal | Test | L-arginine free base | More arginine per gram; no chloride; alkaline solution | Assay above 101%; chloride below 16.8%; pH up | Chloride, pH, titration | Sodium chloride | Adds chloride and ash; dilutes the salt | Assay low; chloride high; ash high | Chloride, residue on ignition, assay | Other amino acids | Similar acid–base behaviour; similar titration | HPLC profile; rotation shift | HPLC with ninhydrin or MS; polarimetry | D-arginine | Same formula and mass; same titration | Rotation outside +21.0° to +23.0° | Polarimetry; chiral HPLC | Water | Corrected out of a dried-basis assay | Loss on drying high; as-is assay low | Loss on drying; as-is calculation Colour and solubility are the weakest signals: white to off-white covers many powders, and both the base and the salt dissolve freely. The stronger signals are the chloride figure, the rotation and the mass balance, and they are the ones to ask for when the form is in doubt. ## How to write the identity block - “L-arginine hydrochloride, CAS 1119-34-2, C6H14N4O2·HCl; not the free base.” - “Identification by IR against a reference and by titration; state the technique and the titrant.” - “Assay 99.0–101.0% by titration, calculated as the salt; state the basis.” - “Specific rotation +21.0° to +23.0° at c=2 in 5 M HCl; state solvent, concentration and temperature.” - “Chloride reported for each lot, with the method and the result.” - “Loss on drying ≤0.5%; heavy metals and microbiology as on the catalog specification.” - “Particle size ≥95% through 80 mesh, or the agreed granulated distribution.” ## Five questions for the supplier - Is this the hydrochloride, and does the certificate name the salt and CAS 1119-34-2? - What is the chloride result, and by which method? - Which rotation did the lot give, under which conditions, and on what assay basis? - Will you provide the IR spectrum and the chromatogram, not just the results table? - If a result is contested, will you join a re-test on the retained sample? The five answers should reconcile with each other and with the certificate. The product hub carries the catalog specification; the COA page shows where each figure sits; the L-arginine page covers the free base; the chloride and label comparison works through the form arithmetic; the methods library explains the assays, and the quality page the release file. ### 01 What the L-carnitine tartrate COA actually contains URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-carnitine-tartrate/coa/ Reviewed: 2026-11-20 The certificate for an L-carnitine L-tartrate lot reports appearance, identification by HPLC and infrared, the salt assay, the L-carnitine content, loss on drying, the heavy-metal panel, microbiology and particle size. The two percentage figures are not interchangeable: the assay describes the tartrate salt, while the carnitine content describes the fraction that a label conversion uses. A certificate is only comparable when each line states the method, the release limit and the measured result, together with the basis of the percentage. In one lineThe tartrate certificate carries two numbers that are easy to confuse: the salt assay and the carnitine content, and the second one is the figure a label conversion needs. ## The certificate as a test report A certificate can be audited line by line when each row names what was measured, how it was measured and the limit the lot was released against. A row that reads only “conforms” records a conclusion, not evidence. The table below is the catalog specification; the batch certificate is the document that confirms one lot against it. Identity, assay and limits · L-carnitine L-tartrate | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | HPLC retention and infrared spectrum | Conforms to the reference | Assay (tartrate) | HPLC | 98.0–102.0% | L-Carnitine content | HPLC or titration | 68.0–72.0% | Loss on drying | Gravimetric | ≤1.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh Read the sheet in two blocks. The upper rows describe the material and its two percentages; the lower rows describe the powder and its contaminants. A certificate that reports the salt assay but omits the carnitine content has not told the buyer how much carnitine the drum carries. ## Two percentages and the 2:1 ratio L-carnitine tartrate is a 2:1 salt: two carnitine units of 161.20 g/mol and one L-tartaric acid unit of 150.09 g/mol give 472.49 g/mol. Carnitine is 322.40 ÷ 472.49 = 68.2% of that mass, and tartaric acid is the remaining 31.8%. The catalog sets the salt assay at 98.0–102.0% by HPLC and the carnitine content at 68.0–72.0%. The two ranges describe the same salt from different directions, and a certificate that reports one without the other leaves the buyer to guess. The basis is the second question. The salt assay should say whether it is calculated on the powder as received or on the dried basis; with loss on drying at ≤1.0%, the difference is up to one percentage point. The carnitine figure should carry the same statement. When the carnitine result sits at the top of the catalog range beside a salt assay near 100%, ask which method produced it and whether the calculation used the stoichiometric factor, because the two figures should describe the same 2:1 salt. ## Release limit, result and the line between them A certificate has two jobs on every line: it states the acceptance boundary and then reports what the laboratory found. Keep those in separate columns and put the method next to the number. When the result column simply repeats the limit, the reader learns the gate but not the lot. What the result column should contain | Parameter | Release limit | Result column | Salt assay | 98.0–102.0% by HPLC | A measured percentage, with the basis | L-Carnitine | 68.0–72.0% | A measured percentage, with the method | Loss on drying | ≤1.0% | A measured percentage | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot | Particle size | ≥95% through 80 mesh | The measured percentage through the sieve One-sided limits and two-sided limits behave differently. Water, metals and microbiology are one-sided: any result below the limit passes, and the number still matters because it shows margin. The assay and the carnitine content are two-sided windows, so a result near either edge is a conversation about method and sampling, not a pass mark. ## What moves from lot to lot Water is the first variable. The drying end-point and the packing-room humidity move the loss on drying, and that moves the as-is assay with it. Particle size is the second: the standard powder is ≥95% through 80 mesh, and a mill or sieve change can shift the fines without changing the chemistry. Colour is the third: white to off-white covers a wide window, and a cream tint can come from the dryer or from the tartaric acid lot. Two lines move less often but say more. The carnitine content should track the salt assay within the stoichiometric ratio; a gap between them points to a blend, a different salt or a calculation error. The infrared identity should be stable across lots; if the spectrum changes, the counter-ion or the solid form has changed, and the certificate needs a closer look rather than a new pass statement. ## When an outside laboratory is worth it Order an independent test for a new source, a first shipment into a regulated market, a certificate that reports one percentage without the other, or a disputed lot. The useful panel is targeted: HPLC for the salt assay, a second HPLC or titration for carnitine, infrared for identity, loss on drying, ICP-MS for the metals and a plate count for microbiology. Add chiral HPLC for D-carnitine and a tartrate-specific test if the form is in question. Ask the laboratory to report its detection limit for each screen. “Not detected” without a limit describes the method, not the sample. When a result is contested, the sample tested should be the retained sample from the lot, and the lot code on the certificate, the pack and the referee report should match. ## What to compare between suppliers Put six lines side by side: the form and CAS number, the salt assay with its method and basis, the carnitine content with its method, the loss on drying, the contaminant and micro panel, and the particle size. Two quotations that agree on the salt assay but differ on carnitine are not describing the same powder; two that agree on both but differ on water will run differently on a capsule line. The second layer is traceability. The certificate should name the manufacturing site and the pack date, and the lot code should be the same string on the pouch, the drum and the retained sample. The catalog specification sits on the L-carnitine tartrate product page; the counter-ion evidence is on the identity page; the grade and fill arithmetic is on the grades page; the test methods are described in the methods index; the release workflow is on the quality page; and the base form is on the L-carnitine product page. ### 02 L-carnitine tartrate: the grade, the mesh and the fill URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-carnitine-tartrate/grades/ Reviewed: 2026-11-20 L-carnitine tartrate is the 2:1 salt of L-carnitine and L-tartaric acid, and the grade decision starts with that ratio: 68.2% of the powder is carnitine and 31.8% is tartaric acid. The form is chosen against the base and the acetyl form, then against the mesh and the pack. This page covers the tartrate grade and what changes when a formula switches to it. In one lineThe tartrate grade is a 2:1 salt that carries 68.2% carnitine, so the decision is a trade between a 47% heavier fill and a powder that flows and holds less water than the base. ## Why the tartrate is a grade of its own The carnitine cation is the same in the base and in the tartrate; the counter-ion is what changes. In the tartrate, two carnitine cations are paired with one tartrate dianion, and the resulting crystal is less hygroscopic and freer flowing than the base. That is why a high-speed capsule line or a tablet press often starts with the tartrate rather than the base. The grade is also a label decision. A panel that says L-carnitine base and a drum that contains the tartrate describe different ingredients, even when the carnitine figure per serving is the same. The salt name, the carnitine figure and the fill weight have to be settled together. ## The carnitine forms side by side Carnitine per gram, counter-ion and handling · three forms | Property | L-carnitine base | L-carnitine L-tartrate | Acetyl-L-carnitine HCl | CAS number | 541-15-1 | 36687-82-8 | 5080-50-2 (HCl) | Carnitine per gram | 1.00 g | 0.68 g | 0.79 g free base; 0.67 g as HCl | Counter-ion | None; zwitterion | L-tartaric acid, 2:1 | None as the ester; hydrochloride common | Water uptake | High | Moderate | Moderate to high | Solution | Near neutral | Acidic | Acidic | Label name | L-carnitine | L-carnitine L-tartrate | Acetyl-L-carnitine hydrochloride The 0.68 figure is stoichiometry: two carnitine units at 161.20 g/mol plus one tartaric acid at 150.09 g/mol give 472.49 g/mol, of which 322.40 g is carnitine. The catalog range for carnitine content is 68.0–72.0%, so the lot certificate should be used for the label conversion rather than the theoretical figure alone. ## The powder: 80 mesh, flow and water The standard tartrate grade is a powder with ≥95% passing 80 mesh, and granulation is available where the line needs a coarser, freer-flowing material. The finer mesh suits a tablet blend or a stick pack that needs a uniform dispersion; the granulated grade suits a capsule line that is fighting dust or segregation. Particle size is a finishing specification, so it can change without a change in the chemistry. The tartrate is less hygroscopic than the base, but it is not a dry-room exemption. Loss on drying is specified at ≤1.0%, and an opened pouch in a humid room will move that figure. The solution is clear and acidic, which matters for taste and for any acid-sensitive partner in the blend. ## What the grade does to the fill The conversion is fixed by the ratio. A formula that declares 500 mg of carnitine needs 500 ÷ 0.682 = 733 mg of tartrate; 1,000 mg of carnitine needs 1,466 mg. The base would need 500 mg and 1,000 mg respectively, so the tartrate fill is about 47% heavier for the same carnitine figure. That difference is large enough to change the capsule shell, the tablet weight or the number of servings per pack. Use the lot's carnitine result for the final calculation, not the theoretical share. A lot at 69.5% carnitine needs 500 ÷ 0.695 = 719 mg for the same 500 mg declaration, while a lot at 68.5% needs 730 mg. The difference is small per capsule but adds up over a production run, and it belongs in the batch record rather than in a rule of thumb. ## What to write into the specification - “L-carnitine L-tartrate, CAS 36687-82-8, C18H36N2O12, 2:1 salt.” - “Assay 98.0–102.0% by HPLC; state the basis.” - “L-Carnitine content 68.0–72.0% by HPLC or titration, with the method named.” - “Identification by HPLC retention and infrared spectrum; add chiral HPLC for the L configuration where the risk assessment needs it.” - “Loss on drying ≤1.0%; heavy metals and microbiology as listed.” - “Particle size ≥95% through 80 mesh; granulated on request.” - “Label name and carnitine basis confirmed before the first order.” ## When the tartrate is the wrong grade Three cases argue against it. If the label must say L-carnitine base, the tartrate is not a substitute, because the declared ingredient and the powder would differ. If the capsule or tablet cannot take a fill about 47% heavier, the base is the smaller option. If the formula is built around a neutral solution or an acid-sensitive partner, the tartrate's acidity is a liability rather than a convenience. None of those is a defect in the grade. They are reasons to choose a different one, and the choice should be made before the label, the shell and the stability study are fixed. The direct comparison for a capsule is on the tartrate versus L-carnitine page; the release tests are on the COA page; the base specification is on the L-carnitine product page; the proof of the ratio is on the identity page; the water and pack question is on the stability page; the methods index covers the assays; and the quality page covers release. ### 02.1 L-carnitine tartrate vs L-carnitine: carnitine content, water and fill URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-carnitine-tartrate/grades/l-carnitine-tartrate-vs-l-carnitine/ Reviewed: 2026-11-20 L-carnitine tartrate and L-carnitine base deliver the same carnitine cation at different masses: the tartrate is a 2:1 salt with 68.2% carnitine, so 500 mg of carnitine needs 733 mg of tartrate or 500 mg of base. The tartrate is the easier powder to run and the base is the smaller fill. Water behaviour, fill weight and the label name decide between them. In one lineThe tartrate delivers 68.2 g of carnitine per 100 g of powder and about 47% more fill weight than the base, and it takes up water more slowly; the base is the smaller capsule with the stricter pack. ## What each powder actually contains Carnitine is a zwitterion: a quaternary ammonium group and a carboxylate on the same molecule. The base is that molecule alone. The tartrate pairs two carnitine units with one L-tartaric acid unit, and the salt is 68.2% carnitine by mass. The rest is tartaric acid, not filler. The catalog specifies the tartrate at 98.0–102.0% salt assay and 68.0–72.0% carnitine. The carnitine figure is the one that matters for a label conversion; the salt assay is the one that matters for release. A certificate that gives only the salt assay has not said how much carnitine the drum carries. ## The conversion, with the lot number attached The theoretical factor is 322.40 ÷ 472.49 = 0.682. Divide a declared carnitine mass by the lot's carnitine content to get the powder weight. For 500 mg: 500 ÷ 0.682 = 733 mg at the theoretical figure, 500 ÷ 0.695 = 719 mg at 69.5%, and 500 ÷ 0.685 = 730 mg at 68.5%. Three details keep the calculation honest. Use the carnitine result from the lot certificate, not the middle of the catalog range. Keep the assay basis consistent: a carnitine figure on the dried basis is not the same as one on the powder as received. And write the calculation into the batch record, so the fill weight can be audited against the certificate. ## Water: the tartrate is slower, not immune Both powders take up water; the difference is rate and consequence. The base is hygroscopic, with a loss-on-drying limit of ≤0.5%, and it can soften and cake in an open pack. The tartrate carries a ≤1.0% limit and a counter-ion that reduces water uptake, so it tolerates a normal dose room for longer. Neither powder is a dry-room exemption. In a capsule, water moves between the fill and the shell. A tartrate fill is less likely to pull water from the shell than a base fill, but a humid room still changes the fill weight and the flow. The pack, the liner and the time the pouch stays open decide more than the label on the drum. ## Fill weight, bulk density and the shell Fill weight is set by volume and bulk density, not by the carnitine figure alone. The tartrate needs 733 mg for 500 mg of carnitine, and that mass may not fit the shell that holds 500 mg of base. Size the shell for the tartrate first, then check the capsule count per serving and the label. Bulk density is not fixed by the catalog, so ask for the lot figure and run a fill trial on the machine that will be used. An 80-mesh powder flows differently from a granulated grade, and a high-speed line may need the granulated form even though the milled powder assays the same. A fill trial can prevent a rejected batch. ## What the label has to say If the panel says L-carnitine, the declared mass is carnitine. If it says L-carnitine L-tartrate, the declared mass is normally the salt, and a carnitine figure beside it needs its own conversion and its own basis. The two panels can describe the same carnitine dose with different milligram figures, which is why the ingredient name and the number have to be read together. A switch from base to tartrate is a label change, a fill change and possibly a capsule-count change. It is not a sourcing substitution. The brand's reviewer should see the new specification, the new certificate and the new calculation before the print run. ## When to choose which Choose the tartrate when the line needs flow, when the dose room is ordinary, when the label can name the salt, and when the heavier fill still fits the shell or the tablet. Choose the base when the smallest possible fill matters, when the label already says L-carnitine, and when the plant can hold a dry room and a sealed pack. The tartrate product page carries the catalog specification, the grades page places this comparison in the wider range, the L-carnitine product page carries the base specification, the COA page shows how the two percentages are reported, the identity page covers the 2:1 ratio, and the stability page follows the water question into the pack. The methods index describes the HPLC and titration methods, and the quality page covers release. ### 03 L-carnitine tartrate: water, heat and the pack decide the shelf life URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-carnitine-tartrate/stability/ Reviewed: 2026-11-20 L-carnitine tartrate is a stable salt in the dry state; its practical failure modes are water uptake, caking and, in a liquid, the acidity and microbial load of the matrix. The powder is less hygroscopic than the base but still carries a ≤1.0% loss-on-drying limit. Shelf life is assigned from data on the pack and the storage condition, not from the molecule. In one lineThe tartrate is the calmer carnitine powder, but the ≤1.0% water gate and the acidic solution still set the shelf life, and both belong to the pack and the formula rather than to the molecule. ## The dry powder: water is the first limit The tartrate crystal holds less surface water than the base, which is why it flows better in a normal dose room. The limit is still ≤1.0%, and a pouch that is opened, folded and left in a humid room will cross it. The first sign is not a failed assay; it is caking, bridging in the hopper and a fill weight that drifts. Colour is the second dry-state signal. White to off-white is a wide window, and a cream tint can come from the dryer, the tartaric acid lot or a longer hold. A colour shift inside the window is not an identity failure, but it should be recorded and compared with the previous lot before the next order is released. ## The solution: acidic, clear and microbially exposed The tartrate dissolves freely and gives a clear, acidic solution. The acidity is useful in some matrices and awkward in others: it can be the taste of a stick pack, it can react with a carbonate, and it can shift the pH of a finished drink. Carnitine itself has no ester bond to hydrolyse, so the solution risk is not a slow breakdown of the active; it is the matrix around it. A near-neutral or lightly acidic drink still supports microbial growth if the preservative system is weak. The finished-product study has to cover the preservative, the pH, the heat load and the hold time. A bulk-powder stability result does not predict any of those. ## What drives change in the pack Failure factors for L-carnitine tartrate in a finished pack | Factor | What it does | Control | Humidity in the dose room | Water uptake, caking, fill drift | Dehumidified weighing and filling | Open pouch between weigh-outs | The liner admits room air; loss on drying climbs | Reseal; use the opened pack first | Heat during drying or granulation | Colour shift, harder lumps | Control the drying end-point, not only the peak | Acidity in the matrix | Taste, pH drift, reaction with carbonates | Buffer and compatibility test on the blend | Metal ions in a blend | Tartrate can chelate calcium, iron or zinc | Check the mineral partner and the order of addition | Fine milling | More surface, faster water uptake | Specify the mesh the line can handle The rows are not independent. A humid room plus a fine powder plus an opened pouch is worse than any one of them, and a blend that carries a carbonate plus the tartrate plus water is a reaction waiting for a warm room. The useful question is not whether the tartrate is stable, but in which pack, at which humidity and for how long. ## A stability protocol for the pack Run the study on the pack that will be sold. The usual arms are 25 °C/60% relative humidity for the long term, 30 °C/65% for the intermediate condition and 40 °C/75% for the accelerated arm, with time points at 0, 3, 6, 12, 24 and 36 months. Add an open-pack arm that mimics the customer's pouch and a cycling arm between the conditions. Test appearance, loss on drying, salt assay, carnitine content and microbiology at each point, and add particle size or flow where the powder is filled on a machine. For a stick pack or a drink, repeat the work in the matrix at the process pH and heat load. The report should give the individual results, not a single pass statement, and it should identify the pack and the lot family. ## Where the formula changes the answer A capsule or tablet starts with low water activity, but the shell and the excipients can still move water into the fill. Check the fill's loss on drying at release and after storage, and inspect the shell for brittleness or tackiness. A tablet also adds compaction: a granulated tartrate may flow better than the 80-mesh powder and compact with fewer capping problems. A stick pack fails at the seal more often than in the powder. A pinhole in the foil is enough, and the strip should be inspected as well as the fill. A beverage adds pH, preservative and heat; the tartrate's acidity can help or hurt depending on the matrix, and the finished drink needs its own study. None of these formats inherits the shelf life of the bulk pouch. ## How the shelf life is assigned We do not publish one shelf-life number for every destination, because the pack and the storage condition set it. The assigned retest period belongs on the specification and is supported by data for the exact pack. A number without a pack, a humidity and a test panel is a claim, not a shelf life. Once the retest period ends, the retained sample has to be assayed again before any extension. An extension by assumption, or a bulk figure applied to a repacked container, is not supported by data. The product page lists the standard packs; the COA page lists the release tests; the MOQ page covers pack and lead time; the L-carnitine page covers the base; the methods index describes the assays; and the quality page describes the release workflow. ### 04 L-carnitine tartrate: MOQ, pack and ordering URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-carnitine-tartrate/moq/ Reviewed: 2026-11-20 The MOQ for L-carnitine tartrate is 1 kg, supplied as a 1 kg foil pouch; the standard production pack is a 25 kg fiber drum. The catalog lead time is 1–7 days from confirmation of the specification and the order. The powder is the 80-mesh grade unless a granulated form is agreed, and a firm quotation needs the form, the pack, the destination and the documents. In one lineOne kilogram of the 80-mesh powder is the minimum because it is the smallest pack that carries a lot code, a certificate and a retained sample. ## Why the minimum is 1 kg One kilogram is enough for a bench trial, a second trial after the formula changes and a retained sample for the project. It is also the smallest unit that keeps a lot code, a certificate and a sealed pack together. Below that, the material is usually split from a larger lot and repacked, which adds handling and weakens traceability without changing the chemistry. The minimum is a packing unit, not a volume tier. A buyer who needs 500 g should ask for a sample from the offered lot rather than a split pouch; a buyer who needs 30 kg should ask for a drum plus pouches, because the drum has a different liner and freight profile. ## Packs and what each one protects Standard L-carnitine tartrate packs | Pack | Net weight | Construction | Typical use | Foil pouch | 1 kg | Foil laminate, sealed seams | Trial, small batch, retained sample | Fiber drum | 25 kg | Fiber drum with sealed inner liner | Production batch | Granulated powder | On request | Granulated from the 80-mesh powder | Flow and dust control The 80-mesh powder is the catalog form. Granulation is a different specification, not a packing choice, because it changes the particle-size line and may change the flow and the dissolution. If the line needs a coarser powder or less dust, say so before the quotation. On a hygroscopic powder, the pack is part of the specification. The foil laminate and the sealed seam are the moisture barrier; a folded-over top is not a seal. The drum's inner liner does the same job at bulk scale, and the liner should be closed after a partial weigh-out. A desiccant can support the liner in a humid destination, but it does not replace it. ## Lead time and dispatch The 1–7 day window starts when the specification and the order are both confirmed. It covers picking, document preparation and dispatch; it does not include freight transit, customs clearance or the buyer's own release. A granulated grade or a non-standard pack adds time, and the quotation should state that separately. Ask for the dispatch date rather than the range alone. A 1 kg pouch usually moves as a parcel; a 25 kg drum moves on a pallet. The certificate and the rest of the lot documents should travel with the pack, not arrive after it. ## What a quotation needs Six items make a quotation firm enough to compare: - Product and form. L-carnitine L-tartrate, CAS 36687-82-8, 2:1 salt. - Specification. Salt assay, carnitine content, loss on drying, particle size, metals and microbiology, with the version. - Quantity and pack. 1 kg pouches, 25 kg drums, and whether the grade is the standard 80 mesh or granulated. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, specification, SDS, origin, allergen and any market statement the importer needs. - Intended use and market. Supplement, food or another use, and where it will be sold. A quotation that omits the carnitine basis or the destination cannot be compared with another. One drum may fit a market that a second drum does not, so the documents belong in the offer. The quotation carries the commercial terms; this page does not. ## The sample is a lot, not a demonstration The 1 kg pouch is the qualification sample. Before scaling, test identity, salt assay, carnitine content, loss on drying and microbiology, and keep part of that pack as the retained sample. The sample bag should carry the same lot code as the certificate and the quotation; without that link, the powder is a demonstration rather than a qualification lot. A bench trial also shows what a certificate cannot: how the 80-mesh powder flows, whether it cakes after a week in the room, and whether the colour matches the previous lot. Those observations take a week and can prevent a rejected drum. For the tartrate, leave a portion in an open dish overnight and compare it with the sealed control in the morning. ## Terms to settle before the first order Put the commercial and quality terms on the same page: Incoterm, pack, dispatch window, specification revision, a COA for each lot, the retained sample, the retest period and the change-control route. A form change, a mesh change or a new manufacturing site is a new specification, not a note on the order. If a lot misses the agreed specification, the retained sample and a joint re-test against the named method are the route. The quality agreement should name the referee laboratory and say who pays for it. A return argued from appearance alone is difficult to defend from either side. The product page carries the catalog specification; the COA page lists the release tests; the compliance page covers the market files; the stability page covers the pack and the water; the L-carnitine page covers the base; the methods index describes the assays; and the quality page describes release. ### 05 The regulatory file for L-carnitine tartrate URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-carnitine-tartrate/compliance/ Reviewed: 2026-11-20 L-carnitine is an established food ingredient in the European Union and a dietary ingredient in the United States; the tartrate is a salt form with its own specification, safety evaluation and label name. Permission is only the first question. The destination's level rule, the label wording and the contaminant calculation sit in the same file, and the buyer's regulatory team confirms them. In one lineThe tartrate is a carnitine salt with an established food history, but the form, the national level rule and the label wording are separate questions that the destination decides. ## What the file has to hold One certificate can be enough for one market and incomplete for another. The file for L-carnitine tartrate holds the specification version, the lot certificate, the destination's permission and dose rule, the label review and the change-control record for source, process and pack. The certificate supports the material; it does not settle the route. Keep the documents in one versioned list: specification, COA, TDS, SDS, allergen and GMO statements, origin record, food-contact declaration for the pouch or liner, and the market statement the importer needs. A missing line is easier to close at quotation than at the port. ## European Union L-carnitine has a documented history of use in food supplements before 15 May 1997 and is not treated as a novel food as of this review. The tartrate is a salt form of that substance, and EFSA evaluated L-carnitine-L-tartrate as a carnitine source for foods for particular nutritional uses in 2003. That evaluation supports the use; it is not a food-supplement maximum. Food supplements fall under Directive 2002/46/EC, and carnitine is not one of the harmonised vitamins and minerals, so a member state may set a maximum level, require a notification or restrict a form. There is no single EU-wide dose answer. Check the current national rule for each destination as of this review, and record the source of the rule in the file. ## United States L-carnitine was marketed as a dietary ingredient before 15 October 1994 and is not a new dietary ingredient as of this review. L-carnitine L-tartrate is used as a carnitine source, and GRAS conclusions exist for specific uses such as infant formula; a GRAS conclusion for one use is not a permission for every food. For a supplement, the manufacturing rules sit in 21 CFR 111 and the panel format in 21 CFR 101.36. The carnitine figure is declared per serving without a Daily Value percentage, because no Daily Value has been set for it. A structure or function statement is allowed with substantiation and the DSHEA disclaimer; a disease statement is not. ## United Kingdom Great Britain applies retained food law and its own novel-food register; Northern Ireland follows the EU framework under the Windsor Framework. The delivery address decides which file applies, so the buyer's regulatory team should record that decision with the order. A GB-only review is not a substitute for the EU position, and the reverse is also true. ## Contaminants and the finished-product calculation The heavy-metal lines are specification terms, and some of them sit at the legal maximum for a food supplement. Coincidence is not margin: a limit at the legal line leaves nothing for analytical uncertainty. Catalog limits and the EU position for food supplements | Parameter | Catalog limit | EU legal position, as of this review | Lead (Pb) | ≤3 mg/kg | 3.0 mg/kg maximum; the catalog sits at the line | Cadmium (Cd) | ≤1 mg/kg | 1.0 mg/kg maximum; the catalog sits at the line | Mercury (Hg) | ≤0.1 mg/kg | 0.10 mg/kg maximum; the catalog sits at the line | Arsenic (As) | ≤2 mg/kg | No harmonised EU maximum; the line is contractual | Microbiology | Counts and absence tests | Process hygiene and the buyer's specification The calculation is per daily dose, not per kilogram of powder. A lot that passes the drum limit can still exceed the finished-product limit if the serving is large, and the file should show the conversion. In the US, California's Proposition 65 adds a warning threshold for lead and cadmium assessed per dose, so a lot can satisfy the specification and still raise a label question in one state. ## Claims and the edge of the label On the EU side, Regulation 1924/2006 requires an authorised entry before a health claim can appear on the label, and the register is the place to check it. As of this review there is no authorised claim for L-carnitine, so any health wording needs a citation that can be produced. A compositional line such as “L-carnitine L-tartrate 500 mg per capsule” is not a health claim; it still has to agree with the specification and with the basis of the figure. In the US, the structure or function route is open with the disclaimer, but it rests on substantiation held by the brand owner and does not extend to a disease. This site publishes the specification and makes no health claim; the claim decision belongs to the brand with the market's rules in front of it. ## Documents for the tartrate file - A lot certificate naming the form, the salt assay, the carnitine content and the basis. - The versioned specification with the mesh, the pack and the storage condition. - The safety data sheet and an allergen statement covering the material and the pack. - A manufacturing site and country-of-origin statement naming the actual producer. - An EU statement showing the pre-1997 history, and the tartrate evaluation where the use relies on it. - A US dietary ingredient statement, or the GRAS basis for the intended use. - The food-contact statement for the pouch or liner, written for the destination. - The stability summary and the shelf life written for the actual pack, not for a different container. The COA and the specification are the core. The rest of the file answers questions the certificate cannot: where the lot was made, what the pack is, and which market route the buyer intends. A document set that is complete for a supplement may not cover a conventional food, and a beverage dossier is a separate filing. ## A short review checklist - The form is written the same way on the specification, the certificate and the label. - The level rule has been checked for the destination rather than borrowed from another market. - The carnitine figure and the salt figure are both stated, with the basis. - The contaminant results are converted to the finished-product dose. - The label and any claim have been reviewed for the destination. - The pack and the storage condition are in the specification. - A change of form, source or site triggers a new specification and a new review. The product page carries the catalog specification; the L-carnitine page covers the base form; the methods index describes the assays; the quality page describes the release file; and the EU regulatory notes collect the framework references. ### 06 How to prove a lot is L-carnitine L-tartrate URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-carnitine-tartrate/identity/ Reviewed: 2026-11-20 A lot is L-carnitine L-tartrate when the document, the chromatogram, the infrared spectrum, the chiral result and the 2:1 carnitine-to-tartrate ratio agree. The assay alone cannot prove the form: a blend of carnitine and tartaric acid can be made to weigh like the salt, and the base can carry the same carnitine figure. Identity is a set of measurements that close the same question from different sides. In one lineThe identity of the tartrate is the substance plus the counter-ion: HPLC and IR name the carnitine salt, and the 2:1 carnitine-to-tartrate ratio proves which salt it is. ## The four identity layers Identity layers for L-carnitine L-tartrate | Layer | Question | Test | What it proves | Record | Is the form named? | Name, CAS number, formula, lot code | Paperwork only | Substance | Is it carnitine? | HPLC retention and infrared spectrum | The molecule | Configuration | Is it the L form? | Chiral HPLC or polarimetry | The enantiomer | Counter-ion | Is it the tartrate? | Tartaric acid by HPLC or titration; carnitine content | The 2:1 salt The order matters. A buyer who starts with the assay is looking at the one number that is compatible with every failure mode on the list. The record is the simplest layer and the easiest to check; the counter-ion is the layer that separates the tartrate from the base and from a blend. ## The 2:1 ratio and what it catches The salt pairs two carnitine units with one L-tartaric acid unit. The theoretical mass fractions are 68.2% carnitine and 31.8% tartaric acid. A certificate that reports carnitine at 68.5% and tartaric acid at 31.5% is consistent with the salt; a certificate that reports carnitine at 68.5% but no tartaric acid figure has only told half the story. The ratio is also the blend detector. A powder made from carnitine base and tartaric acid can be formulated to the same carnitine figure, but the two components are separate solids rather than one salt. The infrared spectrum and the X-ray pattern can show the difference, and the dissolution behaviour may differ as well. The ratio check is not a purity grade; it is a form check. ## X-ray diffraction and the solid form X-ray diffraction reads the crystal lattice. It can show that a lot is the same crystalline form as the reference, and it can catch an amorphous dilution or a physical mixture that the assay does not resolve. It is not a purity assay and it does not measure the counter-ion. XRD cannot assign the configuration of either half. L-carnitine and D-carnitine are isostructural, and L-tartaric acid and D-tartaric acid are as well, so a diffraction pattern cannot prove which enantiomer is present. Use XRD for the solid form and chiral methods for the configuration; a supplier who offers a diffraction pattern as proof of the L form has offered the wrong evidence. ## The substitution routes to check Substitution routes for L-carnitine L-tartrate and their signals | Route | What it does | Signal | Test | Base plus tartaric acid | Matches the mass and the carnitine figure | IR or XRD shows two solids; the ratio may drift | IR, XRD, tartaric acid assay | D- or DL-tartaric acid | Alternative counter-ion; same mass | Chiral result differs; rotation shifts | Chiral HPLC, polarimetry | L-carnitine HCl | Different counter-ion; chloride present | Tartaric acid low; chloride high | Ion chromatography, tartrate assay | Dilution with a carrier | Lowers both fractions | Salt assay and carnitine both low | Mass balance, loss on drying | D-carnitine or a racemate | Same mass, wrong enantiomer | Chiral result; rotation toward zero | Chiral HPLC, polarimetry Each route is caught by a different line. The salt assay catches dilution; the carnitine figure catches a low carnitine load; the tartaric acid figure catches the wrong counter-ion; the chiral result catches the wrong enantiomer. A certificate that reports only the salt assay has tested one of the five. ## How to write identity into the specification - “L-carnitine L-tartrate, CAS 36687-82-8, C18H36N2O12, 2:1 salt.” - “Assay 98.0–102.0% by HPLC; state the basis.” - “L-Carnitine content 68.0–72.0% by HPLC or titration.” - “Tartaric acid content consistent with the 2:1 ratio, with the method named.” - “Identification by HPLC retention and infrared spectrum.” - “Chiral HPLC for D-carnitine, and a chiral check on the tartrate where the risk assessment needs it.” - “Loss on drying ≤1.0%; particle size ≥95% through 80 mesh.” ## Five questions for the supplier - Which form and CAS number are on the certificate, and is the carnitine figure on the same basis as the salt assay? - What is the tartaric acid result, and which method produced it? - Can you provide the HPLC chromatogram, the infrared spectrum and the chiral result, not only the assay percentage? - What is the loss on drying on this lot, and how was the carnitine figure calculated? - If this lot is challenged, which retained sample would both sides test, and at which laboratory? Five answers, each tied to a different measurement, build the identity file; one assay percentage cannot. The product page carries the catalog specification; the COA page shows where each figure sits on the certificate; the grades page compares the forms; the level-four comparison covers fill and water; the methods index explains the separations; the quality page describes the release file; and the L-carnitine page covers the base form. ### 01 What the COA for L-citrulline malate 1:1 actually contains URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-citrulline-malate/coa/ Reviewed: 2026-11-20 A certificate for L-citrulline malate 1:1 has to report two quantities, not one: the salt assay and the L-citrulline content, with the malate figure that closes the ratio. The catalog sets the assay at 98.0–101.0% by HPLC, the L-citrulline content at 55.0–60.0% and the loss on drying at ≤1.0%. A certificate that shows only the assay has not shown which ratio was released. In one lineThe assay and the L-citrulline content are two different numbers, and the ratio between citrulline and malate is what makes the name 1:1 mean something. ## Reading the certificate line by line Every row on a useful certificate answers three questions: what was measured, how, and against which limit. For a salt with two components there is a fourth: what the percentage is a percentage of. A COA that lists numbers without methods and bases cannot be audited, however clean the numbers look. Catalog tests for L-citrulline malate 1:1 | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | HPLC retention and IR spectrum | Conforms to the reference | Assay | HPLC | 98.0–101.0% | L-Citrulline content | HPLC | 55.0–60.0% | Loss on drying | Gravimetric | ≤1.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh The 80 mesh line is a finishing specification, finer than the 40 mesh used for the free amino acid. A mill or sieve change moves the result without touching the chemistry, so the result column needs the measured percentage rather than a tick. ## Two percentages and the moisture between them An assay near 99% beside a citrulline content near 56% can look contradictory until the basis is clear. The two figures describe different things: the assay describes the salt, and the citrulline result describes one component of it. The remaining mass is malate, not impurity. In a 1:1 molar salt, 175.19 g of citrulline plus 134.09 g of malic acid gives 309.28 g, so the theoretical split is 56.6% citrulline and 43.4% malate. Moisture sits between the two readings. A 97.5% as-is assay with 0.8% loss on drying calculates to 98.29% on the dried basis (97.5 ÷ 0.992). The ≤1.0% limit keeps that gap small, but it is not zero: at 1.0% water the same as-is figure becomes 98.48% dried, and at 0.3% it is 97.79%. The basis has to be printed beside the number, not left to a footnote. The ratio is a calculation, not a third measurement. Divide the citrulline percentage by 175.19 and the malate percentage by 134.09, then divide the first quotient by the second. A lot at 57.0% citrulline and 42.0% malate gives 0.3254 ÷ 0.3132 = 1.04. That quotient belongs on the certificate when the grade is part of the purchase. ## Gate, result and the distance between Each specification line has a gate and a result. The gate is the boundary; the result is what the laboratory measured. A row that repeats the limit has told the reader nothing about the lot, and it hides how much room was left before the next batch would fail. What belongs in the result column | Parameter | Release limit | Result column | Assay | 98.0–101.0% | A measured percentage, its basis and the method | L-Citrulline | 55.0–60.0% | A measured percentage on the same basis as the assay | Loss on drying | ≤1.0% | A measured percentage | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot A loose pair of component limits does not pin the grade. At 55.0% citrulline and 45.0% malate the molar ratio is about 0.94, and at 60.0% citrulline and 40.0% malate it is about 1.15. Both could pass two wide ranges while describing different powders, which is why a calculated ratio line is worth adding. ## Where lots drift The ratio is the first variable. It moves when a supplier blends citrulline and malic acid instead of drying a reacted salt, and it can drift while the assay stays comfortably inside its range. Water is the second: the drying step and the pack both set it, and the tight ≤1.0% release limit means an opened pouch can exceed it within days in a humid room. The sieve is the third, and it moves with the mill and the mesh. Malic acid source is a fourth variable that the certificate rarely shows. The synthetic route starts from maleic anhydride; the fermentation route uses a microbial process. Each carries its own impurity profile and origin statement, and a buyer who needs a non-GMO or fermentation declaration needs the route identified before the lot is booked, not after. Colour is the weakest line. White to off-white is a wide window, and a tint can follow heat during drying, a trace of reducing sugar or the malate source. One tinted lot is not an identity failure; a trend across lots is a reason to ask for the batch record. ## The independent panel Outside testing earns its place when the source is new, the destination is regulated, the supplier does not calculate the ratio, or a result is disputed. The panel does not need to repeat every row: HPLC for citrulline and assay, malate by titration, loss on drying, ICP-MS for the metals and a micro count cover the release questions. Add X-ray diffraction when the solid form, rather than the assay, is in doubt. The HPLC method has to separate citrulline from its structural neighbours. Arginine and ornithine sit close enough to co-elute on a short run, and a single peak at the right time is not proof if the resolution was never shown. Ask for the chromatogram and the system-suitability data. Keep the chain of custody short and documented. The sample tested should be the retained sample, the report should carry the lot code and the detection limit, and a referee test should use the retained sample rather than a fresh scoop from the drum. ## Six lines for a supplier comparison Compare the name and the ratio basis, the assay and its basis, the citrulline and malate results, the loss on drying, the sieve and contaminant panels, and the documents that come with the pack. Two certificates that agree on assay but differ on ratio are not describing the same powder, even when both are technically within their own specifications. The catalog specification is on the L-citrulline malate product page. The tests that separate a salt from a blend are on the identity page; the difference from the free amino acid is on the L-citrulline page; the HPLC method is described in the methods library; the release workflow is on the quality page. ### 02 Citrulline malate ratios and grades: 1:1, 2:1 or the free amino acid URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-citrulline-malate/grades/ Reviewed: 2026-11-20 The catalog material is L-citrulline malate 1:1, a molar salt that carries 56.6% citrulline and 43.4% malic acid at theory. Commercial material is also sold as 2:1, and that label can mean 72.3% citrulline on a molar basis or 66.7% on a mass basis, so the ratio and its basis belong in the name. The free amino acid is a third product, not a grade of the salt. In one lineA citrulline malate grade is defined by the ratio and its basis before it is defined by mesh or purity: the 1:1 molar salt carries about 56.6% citrulline, and a 2:1 label can mean 72.3% or 66.7%. ## The name carries the grade Citrulline malate is not one specification. The name covers a family of citrulline–malate combinations, and the ratio decides how much citrulline a gram of powder contains. A 1:1 and a 2:1 lot can both pass 98.0–101.0% assay while delivering different amino-acid loads, because the assay describes the salt and the label may describe the citrulline. The catalog sheet is written for the 1:1 molar salt: assay 98.0–101.0% by HPLC, citrulline 55.0–60.0%, loss on drying ≤1.0% and ≥95% through 80 mesh. A 2:1 powder at roughly 72% citrulline cannot meet that citrulline range, so the sheet does not transfer to it. An order that names only “citrulline malate” has left the ratio open. The free amino acid is a separate ingredient with its own assay basis and rotation, not a finer mesh of the same product. ## Four readings of the same name A ratio is only meaningful with its basis. Four readings circulate in commercial material: 1:1 molar, 1:1 by mass, 2:1 molar and 2:1 by mass. The first is the material on this sheet. Citrulline content by form and ratio | Form | Citrulline by mass | Powder for 3 g citrulline | 5% solution | Panel name | L-citrulline | 100% | 3.0 g | pH 5.0–7.0 | L-citrulline | 1:1 molar (this catalog) | 56.6% | 5.3 g | Acidic | L-citrulline malate 1:1 | 2:1 molar | 72.3% | 4.2 g | Acidic | L-citrulline malate 2:1 | 2:1 by mass | 66.7% | 4.5 g | Acidic | L-citrulline malate 2:1, basis stated | 1:1 by mass | 50.0% | 6.0 g | Acidic | Not this catalog The last row is the trap. A 1:1 blend by mass is half citrulline and half malic acid, which falls below the 55.0–60.0% catalog range. A supplier quoting “1:1” at 50% is describing a different powder, so the purchase order and the certificate should both say “molar”. 2:1 is the other commercial grade. It carries more citrulline and less malic acid per gram, so it needs less powder for a given citrulline figure and is less sour than the 1:1 material. It is still not the free amino acid: a little over a quarter of the powder is malate. ## Water, flow and sourness Both grades are white to off-white powders, and the catalog 1:1 is ≥95% through 80 mesh. Malic acid takes up water, and the 1:1 material holds more of it per gram than the 2:1, so the 1:1 cakes first in an open room and needs the tighter in-use discipline. A granulated version improves flow and reduces dust without changing the ratio, but it changes the sieve line and therefore the specification. Sourness follows the same proportion. The malate solution is acidic, while a 5% solution of the free amino acid sits at pH 5.0–7.0. Per gram of citrulline, the 1:1 powder brings about 0.77 g of malic acid and the 2:1 about 0.38 g. In a flavoured drink that is a design input; in a capsule it is a compatibility question for the shell and for any acid-sensitive partner in the blend. ## From label figure to powder weight Begin with what the panel declares. If it declares 3 g of citrulline, the weights are 5.3 g of the 1:1 salt, 4.2 g of the 72.3% grade or 3.0 g of the free amino acid. If it declares 6 g of citrulline malate 1:1, the citrulline delivered is 6 × 0.566 = 3.4 g. Fill weight follows the same arithmetic. A 500 mg capsule holds 283 mg of citrulline as the 1:1 salt; the free amino acid would put the full 500 mg in the same capsule. A stick pack or drink mix has room for a multi-gram serving, so the acid becomes a flavour decision rather than a fill constraint. These are conversions between a label figure and a powder weight, not advice about how much anyone should take. ## Clauses for a 1:1 purchase - Name the material as L-citrulline malate 1:1 (molar), CAS 54940-24-2, with the formula C6H13N3O3·C4H6O5. - Set the assay at 98.0–101.0% by HPLC and state whether it is as-is or dried. - Set citrulline at 55.0–60.0% and add a calculated molar ratio of 0.95–1.05. - Keep loss on drying at ≤1.0% and particle size at ≥95% through 80 mesh. - Carry the metal and microbiology limits from the catalog sheet. - Declare the malate source and confirm the label name and market before the order. Write “1:1 molar”. The unqualified form has a second reading, 50% citrulline, which is a different product; the same caution applies to a 2:1 order. ## When the free amino acid wins Choose L-citrulline when the panel already says L-citrulline, when the capsule is at its fill limit, when the blend contains a carbonate or another acid-sensitive component, or when the specification is built around rotation and titration. Choose the malate when the label names it, when the serving is a flavoured powder, and when the acid is part of the design. A switch is not a weigh-up substitution. It needs a new specification, a new fill weight and a new label; leaving the old panel in place while the powder changes creates a mismatch that a label check will catch, usually after the packaging has been printed. The product hub carries the catalog sheet. The level-four comparison takes the ratio, the acidity and the label further; the L-citrulline grade page describes the free amino acid's alternatives; the methods library covers the assays. ### 02.1 L-citrulline malate vs L-citrulline: the ratio, the acidity and the label URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-citrulline-malate/grades/l-citrulline-malate-vs-l-citrulline/ Reviewed: 2026-11-20 Citrulline malate 1:1 is not a synonym for L-citrulline. The salt carries about 56.6% citrulline and 43.4% malic acid, so a citrulline figure on a label needs about 1.77 g of powder per gram, and the powder brings an acid load that the free amino acid does not. The ratio, the acidity and the label move together, and this page takes them in that order. In one lineThe ratio fixes how much citrulline a gram of powder carries, the malate fixes the acidity, and the label has to name the form and the figure it declares. ## The ratio and its basis The 1:1 salt is built from one citrulline molecule (175.19 g/mol) and one malic acid molecule (134.09 g/mol), so the pair weighs 309.28 g/mol and the citrulline fraction is 175.19 ÷ 309.28 = 56.6%. The malate is the other 43.4%. Those are fixed by the formula, not by the assay, and they are the numbers behind the 55.0–60.0% catalog range. What “1:1” and “2:1” can mean | Reading | Citrulline | Malate | Status | 1:1 molar | 56.6% | 43.4% | The material on this catalog sheet | 1:1 by mass | 50.0% | 50.0% | Below the 55.0–60.0% catalog range | 2:1 molar | 72.3% | 27.7% | A different grade with a different label figure | 2:1 by mass | 66.7% | 33.3% | Another reading of the same printed name The second row is the reason “1:1” alone is not a specification. A blend at equal masses would sit at 50% citrulline and fail the catalog range, so the 1:1 sold here is molar. Ask for the word “molar” on the purchase order and on the certificate, and ask for the citrulline and malate results that calculate to it. The ratio is a property of the powder, not a serving suggestion. A certificate that reports only an assay has not defined it, because two blends can meet the same assay with different citrulline fractions. The calculation is simple: citrulline percentage divided by 175.19, malate percentage divided by 134.09, and the quotient compared with 1.00. ## The acid the malate brings Malic acid has two carboxyl groups with pKa values near 3.40 and 5.11, so a 5% solution of the malate reads acidic. The free amino acid is close to neutral: its 5% solution sits at pH 5.0–7.0. The difference is not a trace; it is the second component of the salt doing what an acid does. Per gram of citrulline, the 1:1 material delivers about 0.77 g of malic acid, and the 2:1 material about 0.38 g. That acid load is a formulation decision before it is an analytical one. It sharpens a fruit flavour in a stick pack, it reacts with a carbonate or bicarbonate in a dry blend, and it is a compatibility question for an enteric coating or an acid-sensitive active. In a capsule it is a question for the shell and for the moisture the fill can hold. The acid is not a defect and it is not removed by buying a higher assay. A formulator who wants the citrulline without the acid wants L-citrulline, not a cleaner malate. ## The powder a label figure needs If the panel declares 3 g of citrulline, the 1:1 material needs 3 ÷ 0.566 = 5.3 g of powder, the 72.3% grade needs 4.2 g, and the free amino acid needs 3.0 g. If the panel declares 6 g of citrulline malate 1:1, the citrulline delivered is 6 × 0.566 = 3.4 g. If it declares 6 g of citrulline and the powder is the malate, the weight is 10.6 g. Those figures decide the pack. A 500 mg capsule holds 283 mg of citrulline as the 1:1 salt, 362 mg as the 72.3% grade, or the full 500 mg as the free amino acid. A stick pack or a drink mix has room for a multi-gram serving; a capsule count rarely does. The arithmetic is the same in both directions, and it should be done before the fill weight is fixed, not after the artwork is approved. None of these numbers is a recommendation about how much anyone should take. They are the conversions that keep the declared figure, the powder weight and the certificate consistent. ## What the label has to say The panel has to name the ingredient that is in the pack. “L-Citrulline” and “L-citrulline malate 1:1” are different declarations, and a tub of one cannot be sold under a panel that names the other. Where the panel declares citrulline and the powder is the malate, the derivation and the ratio belong in the specification and in the label review, because the quantity on the panel is not the quantity of powder on the filling line. A ratio printed on the front of a pack needs its basis beside it. “2:1” reads as 72.3% citrulline on a molar basis and 66.7% on a mass basis, and the two are different products. A certificate may also write “L-citrulline DL-malate”, using the racemic malate name, while the label uses “citrulline malate”; the two names should be reconciled in the specification so the artwork, the certificate and the customs description agree. In the EU, the US and the UK the declared ingredient and the declared quantity have to match the product, and the destination decides the format of the panel. The compliance page sets out the documents; the label decision itself belongs to the buyer's regulatory team. ## When to choose which Choosing the form for a new formula | If the panel or the process is | Choose | Because | A panel that says L-citrulline | L-citrulline | The name and the powder have to match | A panel that says citrulline malate 1:1 | 1:1 molar malate | The declared form is the salt | A flavoured stick or drink that wants acidity | Malate, ratio stated | The acid is part of the flavour design | A blend with a carbonate or a sensitive active | L-citrulline | No added acid load | A 500 mg capsule at its fill limit | L-citrulline | All of the fill is citrulline Choose the 1:1 malate when the label names it, when the serving is measured in grams, and when the acid is wanted. Choose L-citrulline when the panel already says so, when the pack is a capsule at its fill limit, or when the blend cannot carry the acid. A switch in either direction needs a new specification, a new fill weight and a new label review; it is not a substitution at the weigh-up. The catalog specification for the salt is on the L-citrulline malate product page; the parent comparison is on the grade page; the free amino acid is described on the L-citrulline page; the assay methods are in the methods library; the release workflow is on the quality page. ### 03 Citrulline malate stability: moisture, acid and the pack URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-citrulline-malate/stability/ Reviewed: 2026-11-20 The 1:1 powder is not fragile in the way a photolabile ingredient is; its failure modes are physical and microbiological. Moisture makes the hygroscopic malate cake, raises the loss on drying and, through that figure, shifts the basis on which the assay is read. An opened pouch is the realistic worst case, and a reconstituted drink adds a growth medium. The pack, the in-use period and the matrix therefore carry more of the shelf life than the citrulline does. In one lineThe dry powder keeps when the seal keeps; moisture, not the citrulline, is what moves the loss on drying, the flow and the assay basis. ## The sealed powder and its moisture budget The release limit for loss on drying is ≤1.0%. That is tight for a powder containing about 43% malic acid, a hygroscopic solid, and it is a release limit, not a number the powder can hold once the seal is broken. A pouch left open in a humid room gains water at the surface first; the powder then sticks, cakes and reads high on the next loss-on-drying test. Water also changes what the assay percentage means. The dried-basis figure can stay flat while the as-is figure falls, because the water is diluting the weighed sample. Report both, or report one with the loss on drying beside it; a lone as-is result after storage is hard to compare with a release limit written on a dried basis. Temperature accelerates the physical change rather than driving a fast chemical one. A hot store softens the powder and promotes caking; a cool store slows it. Colour should stay white to off-white, and a cream or brown cast in a flavoured blend points to heat and moisture acting on a reducing sugar, not to a change in the citrulline. ## After the powder goes into water The material dissolves readily and the solution is acidic. Once dissolved, the salt is no longer a salt: citrulline and malate ions are separate, and the pH belongs to the mixture, not to a molecule called citrulline malate. That is why a label conversion done on the powder cannot be carried into a liquid without checking the serving volume and the acid contribution. In a ready-to-drink, the acid is both a taste and a preservative hurdle, and the micro risk is more immediate than any slow chemical loss. Pasteurisation or hot fill adds a heat step; the pH, the preservative system and the fill temperature have to be validated together. A clean bulk powder says nothing about the shelf life of the drink made from it. A stick pack sidesteps the liquid shelf life because the consumer adds water at the point of use. The strip is still a pack, with a seal to inspect and an in-use period to state. ## The variables that matter What moves L-citrulline malate in storage | Variable | Effect on the powder or drink | Practical control | Water | Caking, rising loss on drying, falling as-is assay | Foil pouch or lined drum; close the in-use pack | Heat | Softening, caking, colour in a sugar-containing blend | Cool store; controlled process temperature | Acid | Taste, reaction with carbonate, stress on a coating | Check the formula; buffer or separate the components | Micro-organisms | Growth after reconstitution | Preservative or heat step; set an in-use limit | Reducing sugars | Browning in a flavoured blend | Control water activity and storage temperature | Compression | Caking in a hopper or a capsule fill | Granulate or add a flow aid The combination is what matters. A warm, damp store, or a sweetened drink left in a warm room, is the case the trial has to include; testing each variable alone describes a laboratory, not a warehouse. ## Pouch, drum and the pack after opening The 1 kg pouch is a moisture barrier with a heat seal. Once cut open, the seal is gone; a folded top is a closure, not a barrier. Decant the remainder into a smaller dry container, or write an in-use period into the specification and keep to it. The 25 kg drum depends on the liner, not the board. Close the liner after each withdrawal, keep the drum off a damp floor and write the opening date on the label. The drum code, the liner code and the certificate should point at the same lot; if they do not, the traceability chain has a break before the powder is even used. A desiccant can lower the humidity inside a container, but it cannot compensate for a damaged seal or an open liner. Nitrogen flushing is not part of the standard pack; ask for it as a separate specification if the application needs it. ## Designing the storage trial Write the trial around the pack and the condition, then choose the time points. Long-term 25 °C/60% relative humidity and intermediate 30 °C/65% describe a warehouse; 40 °C/75% is the stress arm. Add a sample kept in the opened pouch, because the customer's pack is not the sealed pack after the first scoop. At each point measure assay and its basis, L-citrulline, malate, loss on drying, appearance and microbiology. For a stick pack, inspect the strip and test the powder; for a drink, run the trial in the matrix at the process pH and heat load. The report should give the numbers point by point and identify the pack; a summary that says only “stable” cannot support a retest period. ## Capsule, stick pack or drink A capsule or tablet starts dry, but the fill is hygroscopic and can pull water from the shell or the excipients. Watch the loss on drying, the appearance and the fill weight after storage, not only at release. A stick pack is a seal problem as much as a powder problem: a pinhole is enough to let humid air in, so the strip is part of the inspection. A drink brings the acid, the water and the micro risk into one system. The bulk result is an input, not the answer. An overage is a label decision; it cannot fix a package that leaks moisture or a process that leaves the drink unstable. ## Assigning a retest period We do not quote one shelf life for the ingredient in the abstract. The retest period is assigned to a pack, a storage condition and a test panel, and it is supported by the stability file for that combination. Without those three, a number is only an assertion. When the period is reached, re-test the retained sample before extending use. A figure from a bulk drum is not transferred to a repacked pouch, and the release loss on drying is not a storage allowance. The product hub lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the methods library covers the assays; the quality page describes the release workflow. ### 04 L-citrulline malate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-citrulline-malate/moq/ Reviewed: 2026-11-20 The minimum order for L-citrulline malate 1:1 is 1 kg, packed in a foil pouch; production volumes move in 25 kg fiber drums. Standard lead time is 1–7 days from confirmation. To quote firmly, we need the ratio and its basis, the assay and citrulline limits, the pack, the destination and Incoterm, the document set and the market where the powder will be sold. In one lineOne kilogram is the minimum because it is the smallest pack that can be sampled, tested for the ratio and traced as a lot. ## The 1 kg pack and why it exists A kilogram is a working quantity. It covers a bench trial, a retained sample and an outside check of both the citrulline and the malate figures, and it still ships as a parcel rather than a pallet. That combination is the reason the pack exists; it is not a volume threshold invented to move a drum. Anything smaller is a repack cut from a larger lot. It can be done, but the new unit carries its own handling record and its code no longer points at the original pack, so the ratio evidence becomes harder to follow. The 25 kg drum is the production unit: fewer handlings per kilogram, at the cost of committed stock and a longer storage period. ## What the pouch and the drum hold Packs offered for L-citrulline malate 1:1 | Pack | Net weight | What it is for | What to check | Foil pouch | 1 kg | Trial, retained sample, small batch | Seal, lot code, in-use closure | Fiber drum | 25 kg | Production | Inner liner, drum and liner lot codes | Granulated powder | On request | Flow and dust control | New particle-size line on the specification The catalog powder is ≥95% through 80 mesh. Granulation changes how the powder moves and how much dust it makes, but it does not change the ratio; it does change the sieve result, so the certificate needs the new line. Tell us the mesh before the quotation, because a non-standard finish can add a step to the schedule. ## From confirmation to dispatch The 1–7 day figure starts at order confirmation and ends at dispatch. Picking, document preparation and handover to the carrier sit inside it; transit, customs clearance and the customer's own quality release sit outside. A granulated grade or a non-standard pack gets its own date, and the quotation should say so in a separate line. Ask for the dispatch date rather than the range. A pouch usually travels as a parcel and a drum on a pallet, which changes the freight booking; the Incoterm then decides who arranges carriage and who clears entry. The COA and the rest of the lot file should be in the same shipment as the pack, not sent after it lands. ## The six lines a quotation must carry - Product, ratio and CAS. L-Citrulline malate 1:1 (molar), CAS 54940-24-2; a 2:1 request must state whether the ratio is molar or by mass. - Specification. Assay and basis, L-citrulline 55.0–60.0%, the ratio limit, loss on drying ≤1.0%, 80 mesh, metals and microbiology. - Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated variant. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, TDS, SDS, allergen and GMO statements, origin, residual-solvent statement and any market-specific declaration. - Use and market. Supplement, food or another use, and the country where the finished product will be sold. Two quotations cannot be compared if one names the ratio and the other leaves it out, or if one is written for a market the other has not checked. Commercial terms belong on the quotation, not in this document. ## Qualifying a lot from a 1 kg pack Use the pouch as the qualification lot. Run HPLC identity and assay, the citrulline and malate figures, loss on drying, the metal panel and microbiology before scaling up, and keep a retained sample from the same pouch. The pouch code, the COA code and the quotation reference should agree; a sample that cannot be tied to a lot is a demonstration, not a qualification. A trial that needs less than a kilogram is a repack, and it should be documented as one. Ask for the split in writing, keep the split code with the trial results, and do not present it as the catalog pouch when the production order is placed. ## What the quality agreement fixes Put the commercial and quality terms in one place: pack, dispatch window, specification revision, a COA per lot, the retained sample, the retest period, change control and the referee laboratory. These are easier to agree before the first production order than after a disagreement. If a lot falls outside the specification, the evidence is the retained sample and a joint re-test against the named method. The agreement should name the laboratory both sides accept and say who carries its fee; a return argued from a photograph of the drum is difficult for either side to settle. The product hub holds the catalog specification; release tests are listed on the COA page; market files are on the compliance page; the MOQ glossary entry defines the term; shipping documents are covered by the logistics page. ### 05 The regulatory file for L-citrulline malate 1:1 URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-citrulline-malate/compliance/ Reviewed: 2026-11-20 L-citrulline malate 1:1 is sold as a food ingredient under CAS 54940-24-2, and the ratio is part of what is being sold. A regulatory file has to tie three things together: the specification that describes the powder, the certificate that releases each lot, and the route by which the finished product may be sold in its destination. The buyer's regulatory team owns that route; this page sets out the documents and checks that belong in the folder. In one lineThe specification describes the powder; the regulatory file shows the route, the limits and the label for the destination. ## Four parts of the file The folder has a specification, a lot certificate, a destination note and a change record. The first two describe the powder; the destination note describes the market. The COA, TDS and SDS are often filed as if they were the whole folder, but none of them says whether the finished product can be sold in a given country. Put a versioned index at the front. For this material the index should include the malate source, because malic acid can come from maleic anhydride or from fermentation, and the two routes generate different impurity and origin paperwork. A missing statement is easier to obtain before the order than after the container has sailed. ## EU: the member-state question Directive 2002/46/EC harmonises vitamins and minerals in food supplements. Amino acids and other substances fall outside that harmonised list and are handled under member-state rules, so there is no single EU entry to cite for citrulline malate. The file should record the basis the buyer's team relies on in the destination country, with the date on which it was checked. Food information follows Regulation (EU) 1169/2011, and contaminant limits come from the current EU text. If the ingredient, its source or its process falls within Regulation (EU) 2015/2283, the novel-food route is a separate question and belongs in the same note. The label has to name the form and the ratio; a panel written for the free amino acid describes a different ingredient. ## US: dietary ingredient and GMP On the US market the ingredient is positioned as a dietary ingredient under DSHEA. The supplier states the basis for that position and the buyer confirms that it reaches the finished product. Manufacturing falls under the dietary-supplement GMP rules in 21 CFR 111, and the Supplement Facts panel names the form and the amount per serving. Structure/function wording is reviewed separately, with substantiation and the DSHEA disclaimer. A certificate is evidence about the powder, not about the wording on the label. ## UK: GB and Northern Ireland Great Britain and Northern Ireland do not share one route. GB uses the GB register and GB labelling; Northern Ireland continues under the EU framework described above. The delivery address determines the file, and the buyer's team should put that determination in writing with the order so the label can be checked against it later. ## Metals and microbiology at the drum The metal and micro results on the certificate are release limits for the ingredient. They are not automatically the limits for the capsule or the drink: the finished-product calculation uses the serving weight and the number of servings. The table lists the catalog gates to carry into that calculation. Catalog release gates and what the finished-product file needs | Parameter | Catalog gate | What the calculation needs | Lead (Pb) | ≤3 mg/kg | Lot result, method and contribution per serving | Arsenic (As) | ≤2 mg/kg | Lot result and method | Cadmium (Cd) | ≤1 mg/kg | Lot result and any category exception | Mercury (Hg) | ≤0.1 mg/kg | Lot result and method | Total plate count | ≤1,000 cfu/g | The count and the test portion | E. coli and Salmonella | Absent | The absence statement for the lot Keep the raw-material result, the serving size and the conversion in one place. A drum result without the dose cannot answer a finished-product question, and a finished-product calculation without the lot result cannot be audited. ## Claims, mechanism and the panel None of the markets above opens a disease-related claim for this ingredient. Citrulline is discussed as part of the arginine–nitric oxide pathway; that is a mechanism, not an authorised statement, and this site makes no health claim. Where a structure/function claim is allowed, it needs substantiation and the disclaimer the market requires, and the brand's reviewer signs it off against the destination. The ingredient declaration is separate from a health claim: the panel must name L-citrulline malate and the ratio, and the quantity must describe the powder in the pack. A claim drafted for L-citrulline cannot be moved onto the salt unchanged. ## The document set - Specification for the 1:1 molar material, with CAS 54940-24-2, the assay basis and the citrulline and ratio limits. - COA for the lot: assay, L-citrulline, malate, loss on drying, metals, microbiology and 80 mesh. - TDS and SDS. - Allergen and GMO statements. - Origin and residual-solvent statements. - Malate source declaration, including the fermentation or synthetic route. - Destination note for the EU member state, the US, GB and Northern Ireland. - Change-control record for source, process, pack and specification revision. ## Before the purchase order - The specification version and the 1:1 molar basis are on the order. - The COA, TDS, SDS and statements are in the folder. - The malate source is declared. - The metal and micro results are converted to the finished-product dose. - The label names the form and the ratio. - The destination route is written down and dated. - Source, process and pack are under change control. The product hub holds the catalog specification; the COA page explains the certificate; the identity page covers the analytical evidence; the EU regulatory notes collect the framework references; the quality page describes the release file. ### 06 How to prove a citrulline malate lot is 1:1 URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-citrulline-malate/identity/ Reviewed: 2026-11-20 A citrulline malate lot is the 1:1 material when four lines agree: the document names the ratio and CAS, HPLC and IR identify citrulline, the citrulline and malate results calculate to a 1:1 molar ratio, and the mass balance accounts for water and the counter-ion. The assay alone cannot do this, because a blend and a reacted salt can both read 99.0%. The ratio is the line that separates them. In one lineIdentity is the ratio proved from two results: citrulline by HPLC, malate by titration, and a molar quotient near 1.00, with water closing the balance. ## Five questions, five kinds of evidence Identity is not one test. Each line below answers a different question, and a supplier who stops at the document has shown intent rather than proof. The table maps the question to the evidence that settles it. The evidence behind a 1:1 claim | Layer | Question | Evidence | What it settles | Document | Are the name, ratio and CAS stated? | Name, CAS number, formula | The claim, not the powder | Chromatography | Is the amino acid citrulline? | HPLC retention and IR spectrum | The molecule | Ratio | Is the grade 1:1? | Citrulline and malate results | The grade | Mass balance | Is the powder diluted? | Assay, loss on drying, impurities | Whether the numbers add up | Solid form | Is it a salt or a blend? | X-ray diffraction | The physical state A certificate with a name and an assay has answered the first row and part of the second. The ratio and the solid form are where a blend can pass as a salt, and they are the rows a one-number COA leaves blank. ## Turning two results into a ratio The theory is fixed. One citrulline unit at 175.19 g/mol and one malic acid unit at 134.09 g/mol make 309.28 g/mol, so a 1:1 salt is 56.6% citrulline and 43.4% malate. The catalog range of 55.0–60.0% citrulline is wide enough to cover normal manufacturing variation; it is not wide enough to define the grade on its own. The calculation is short: divide the citrulline percentage by 175.19, divide the malate percentage by 134.09, then divide the first quotient by the second. At 57.0% citrulline and 42.0% malate the result is 0.3254 ÷ 0.3132 = 1.04. At 55.0% and 45.0% it is about 0.94; at 60.0% and 40.0% it is about 1.15. A ratio limit of 0.95–1.05 closes a gap that two separate ranges leave open. Basis and method belong beside the numbers. Both results should be on the same moisture basis, and the malate method should be named: a titration measures acid groups and can count other acids, while HPLC is more specific to malate. A 1:1 blend by mass would sit at 50% citrulline, below the catalog range, so the 1:1 sold here is molar. A certificate may also use the name L-citrulline DL-malate, because the malic acid is normally the racemic form; the specification and the label should agree on one name. ## What diffraction adds X-ray diffraction sees phases, not percentages. A physical blend of crystalline citrulline and crystalline malic acid can show two sets of reflections, while a reacted and dried salt may be a single phase or largely amorphous depending on the process. That is a different question from the ratio, and it can be the decisive one when a lot flows or dissolves unlike the retained sample. It is not a release test on the catalog, and it does not measure the counter-ion. Ask for the pattern, the reference and the detection limit before accepting a line that says the pattern matches. A “conforms” statement without the pattern is a conclusion without evidence. ## Substitution patterns How a citrulline malate lot can be stretched | Adulterant | What changes | Signal | Test | Added L-citrulline | Citrulline up, malate down | Ratio above 1 | Both component results | Added malic acid | Citrulline down, acidity up | Ratio below 1 and lower pH | Malate result | Dilution | Assay and citrulline down | Mass balance does not close | Assay, loss on drying, ash | Arginine or ornithine | Citrulline overstated on a short run | Extra peak or poor resolution | Chromatogram, mass spectrometry | Water | As-is assay down | Loss on drying up, dried assay normal | Loss on drying Colour is the easiest signal to fake: white to off-white is a broad target and a diluent can match it. The ratio and the mass balance are harder to reproduce, which is why a certificate that reports one assay and no ratio has not tested the most likely substitution. ## Clauses that pin the identity - “L-Citrulline malate 1:1 (molar), CAS 54940-24-2, C6H13N3O3·C4H6O5.” - “Assay 98.0–101.0% by HPLC; state whether the figure is as-is or dried.” - “L-Citrulline 55.0–60.0%; calculated citrulline:malate molar ratio 0.95–1.05.” - “Loss on drying ≤1.0%; particle size ≥95% through 80 mesh.” - “Heavy metals and microbiology as listed on the catalog sheet.” - “Malate source declared; no added citrulline or malic acid beyond the declared ratio.” - “Destination market and label name confirmed before the order.” ## Questions that produce evidence - Which ratio does the certificate describe, and is it molar or by mass? - What are the citrulline and malate results for this lot, by which methods and on which basis? - What molar ratio do those two results calculate to? - What is the loss on drying, and which basis does the assay use? - Will you provide the chromatogram, the XRD pattern where relevant, and a joint re-test on the retained sample if the lot is disputed? Five answers of this kind make an identity file; one assay percentage does not. The product hub holds the catalog specification; the COA page shows where each figure sits on the certificate; the grade page compares the ratios; the level-four comparison covers the label consequences; the methods library explains the assays; the quality page describes the release file. ### 01 What the COA for L-cysteine HCl actually contains URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-cysteine-hcl/coa/ Reviewed: 2026-11-20 The certificate for an L-cysteine hydrochloride monohydrate lot reports appearance, identification by infrared and titration, assay by titration, specific rotation, loss on drying, the heavy-metal panel, microbiology and particle size. Each line needs the method, the basis and the release limit, and the measured result belongs in its own column. The ranges below are what the catalog promises; a batch certificate records what a specific pack actually met. In one lineThe titration figure only means something with the form, the basis and the rotation beside it: the certificate has to show that the lot is the L-cysteine hydrochloride, and how much water it carries. ## The certificate as a test report A certificate is only as good as its audit trail. Each parameter needs the test, the method that produced the number and the limit that applied; “conforms” on its own is a conclusion without the working. Infrared and titration identify the hydrochloride, the rotation assigns the L configuration, and the assay measures the salt. Identity, assay and release limits · L-cysteine HCl monohydrate | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | Infrared and titration | Conforms to the reference | Assay | Titration | 99.0–101.0% | Specific rotation | Polarimetry | +6.0° to +7.5° (c=2, 5 M HCl) | Loss on drying | Gravimetric | ≤0.5% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh ## Titration, rotation and the water question The assay is a titration, and a titration is only reproducible when the certificate names the titrant, the endpoint and the basis. The hydrochloride is the amine salt of L-cysteine; the carboxyl group stays free, so solvent and electrode affect the result. Two laboratories can report different percentages for the same powder if one works as-is and the other on the dried solid. The catalog range is 99.0–101.0%; the basis has to be printed beside it. The form and the water figure belong together. The catalog names the monohydrate and sets loss on drying at ≤0.5%. A full monohydrate carries about 10.3% water of crystallisation, so a 0.5% ceiling can only describe free moisture if the crystal water is reported separately. The certificate should name the water test and the hydrate, because the chloride content and the assay basis follow that answer. Chloride is the counter-ion check the release table does not carry. The monohydrate is 20.2% chloride by mass and the anhydrous hydrochloride 22.5%; a result near 20% supports the monohydrate, and a low figure points to the free base or a dilution. Request it when the hydrate is disputed or a new source is qualified. The rotation is quoted at c=2 in 5 M HCl. Without solvent, concentration, path length and temperature it cannot be reproduced, and the L configuration is the point of the test. The method line names chiral HPLC as well; the release table does not, so the chromatogram is the enantiomer evidence when the rotation sits near its floor. ## The acceptance limit and the measured figure The acceptance limit is the gate; the measured figure is the evidence. The certificate should show both, in adjacent columns, with the method named. When the result column simply restates the range, nothing has been reported about the lot. What the result column should contain | Parameter | Release limit | Result column | Assay | 99.0–101.0% by titration | A measured percentage with the method and the basis | Specific rotation | +6.0° to +7.5° (c=2, 5 M HCl) | A measured angle with the conditions | Loss on drying | ≤0.5% | A measured percentage and the water method | Heavy metals | Per element | A figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot | Particle size | ≥95% through 80 mesh | The measured percentage through the sieve “Passes specification” is a conclusion, and it is only useful when the figures above it support it. Identification may be reported as conforms because it compares with a reference. The rotation is a number with a window, and a figure near the floor deserves a second look. ## What moves between batches The source route and the work-up move the assay and the colour. L-cysteine is made by hydrolysis, by enzymatic conversion or by fermentation, and each route leaves its own impurity profile. A pink or yellow tint is a reason to ask for the metal panel and the related-substance profile, not a rejection on appearance alone. Oxidation is the quiet variable. The thiol converts to L-cystine, a disulfide, and a small fraction may not move the titration out of range. A stronger sulfur odour, a duller colour or a low rotation is a prompt to ask for related substances, because the assay alone will not show the change. Water and particle size move with drying, milling and sieving. A partially dried lot can sit between the hydrate and the anhydrous salt while the label still says monohydrate, which is why the water method and chloride belong in the comparison. The 80 mesh result is a finishing specification and can change with the mill without any change in the chemistry. ## When to order an outside test An outside laboratory is worth the lead time when a source is new, a market is new, the hydrate is disputed or a result looks wrong. The panel should not simply repeat the certificate: titration for the assay, polarimetry with the conditions stated, chiral HPLC for the D enantiomer, chloride by titration or ion chromatography, infrared against a reference, water by Karl Fischer, ICP-MS and microbiology. Add X-ray diffraction if the solid form is in dispute, and ask for the detection limit for the D enantiomer and for cystine. A “not detected” line without a limit describes the method, not the sample. Keep the chain of custody intact: the material tested should be the material retained. When a result is contested, give the referee the retained sample, the supplier's certificate and the agreed specification, and ask for the discriminating tests, not another run of the same titration. ## What to compare between suppliers Put seven lines side by side: form and CAS number; assay with method and basis; rotation with conditions; chloride and water; mesh; metals and microbiology; pack and lot code. A quote pair that matches on assay but splits on hydrate or rotation is not offering the same powder. The catalog specification is on the L-cysteine HCl product page. The tests that separate the hydrochloride from the free base and from NAC are on the identity page; the methods behind the numbers are collected in the analytical methods index; the release workflow is described on the quality page. ### 02 L-cysteine HCl, the free base or L-cystine: choosing a form URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-cysteine-hcl/grades/ Reviewed: 2026-11-20 L-cysteine is sold as the hydrochloride monohydrate, the anhydrous hydrochloride, the free base and the disulfide L-cystine. The four differ in cysteine content, pH, solubility and label name, and the hydrochloride carries its own hydrate question. The catalog form here is the monohydrate at 80 mesh. In one lineThe hydrochloride, the free base and L-cystine are different label ingredients, and the hydrate question sits inside the hydrochloride itself. ## Why the hydrochloride is a separate ingredient L-cysteine has a thiol, an amino group and a carboxyl group. The hydrochloride forms at the amino group, so the molecule arrives as a salt with one molecule of hydrogen chloride and, in the catalog form, one molecule of water. That is a different chemical entity from the free amino acid, with a different CAS number, a different mass and a different label name. The salt is not a stronger grade of cysteine. It is 69.0% cysteine by mass in the monohydrate, so a formula that counts the salt as cysteine overstates the cysteine by 45%. The salt dissolves freely and gives a strongly acidic solution; the free base is closer to neutral, and L-cystine, the disulfide dimer, is poorly soluble. A mesh is a grade; a salt is a molecule. ## The four forms side by side L-cysteine forms · CAS, cysteine content, solution and label | Form | CAS · formula · MW | Cysteine content | Solution and label | L-cysteine HCl monohydrate | 7048-04-6 · C3H7NO2S·HCl·H2O · 175.64 | 69.0% | Freely soluble; about pH 1.5–2.0 at 5%; label: L-cysteine hydrochloride monohydrate | L-cysteine HCl anhydrous | 52-89-1 · C3H7NO2S·HCl · 157.62 | 76.9% | Freely soluble; strongly acidic; label: L-cysteine hydrochloride | L-cysteine | 52-90-4 · C3H7NO2S · 121.16 | 100% | Soluble; near-neutral; label: L-cysteine | L-cystine | 56-89-3 · C6H12N2O4S2 · 240.30 | Two cysteine units | Poorly soluble, about 0.1 g/L; label: L-cystine The percentages are not directly comparable. An assay of 99.0–101.0% for the hydrochloride describes the salt, not the cysteine in it; the free base and the cystine are assayed against their own references. Read the named form and the basis before comparing two certificate figures, because 99% of a salt and 99% of the free amino acid are different quantities of cysteine. The label follows the form, not the assay. A hydrochloride lot cannot fill a claim written for L-cysteine, and a cystine lot cannot fill either. The names are close enough to be confused in a purchase order and far enough apart to make the finished label wrong. ## Particle, water and the hydrate Within the hydrochloride, the grade is physical. The catalog is an 80 mesh powder: ≥95% through 80 mesh. A granulated lot is available on request and changes flow, dust and blend behaviour, not the chemistry. The mesh belongs on the purchase order and on the specification, because a mill or sieve change moves the result without moving the assay. The powder is hygroscopic, has an intrinsic sulfur odour and ranges from white to off-white. The monohydrate holds water of crystallisation, which is part of its identity; the anhydrous salt is a different CAS and a different specification, not a drying step added to the same order. Loss on drying is set at ≤0.5% in the catalog, and the certificate should state whether that figure is free moisture or total water. The COA page sets out the water and chloride checks that settle the question. Chloride is the other physical marker: about 20.2% in the monohydrate and 22.5% in the anhydrous salt. It is not on the release table, but it is the quickest analytical way to tell which hydrate a lot is, and a low figure is a warning that the lot is partly free base or diluted. ## The dosage form narrows the choice Capsules and tablets take the 80 mesh powder. A granulated lot flows better on a high-speed press, while the finer powder blends more evenly at low dose. The thiol odour is part of the material, so a closed capsule wall does work that a stick pack does not, and the hygroscopic powder needs a pack that keeps moisture out between filling and use. Powder blends and drink mixes put solubility and pH first. The hydrochloride dissolves freely but gives an acidic solution, which can be acceptable in a fruit-flavoured mix and awkward in a neutral formula. The free base is closer to neutral but is a different label ingredient; L-cystine is too poorly soluble for a clear drink. The matrix decides whether the salt fits, and the label decides whether it is allowed. Mass conversion is where the forms separate at the balance. A 500 mg claim for cysteine base needs 500 ÷ 0.690 = 725 mg of the monohydrate, or 650 mg of the anhydrous salt. A 500 mg claim for L-cysteine hydrochloride is a claim on the salt and is weighed as the salt. The panel and the weigh-up have to name the same form, or the formula is short or over by the water and the chloride. ## What to write into the specification - “L-cysteine hydrochloride monohydrate, CAS 7048-04-6, C3H7NO2S·HCl·H2O.” - “Assay 99.0–101.0% by titration, with the basis stated.” - “Specific rotation +6.0° to +7.5° (c=2, 5 M HCl), with temperature and path length.” - “Chloride about 20.2% and water about 10.3% where the monohydrate is to be confirmed.” - “Loss on drying ≤0.5%, with the water method named; ≥95% through 80 mesh.” - “Heavy metals and microbiology as listed; source route and label name declared.” Name the hydrate in the same line as the salt. “L-cysteine HCl” leaves the water open, and the water changes the cysteine content, the chloride figure and the mass at the balance. The specification should read as one form, one CAS and one set of numbers. ## When not to switch Do not switch forms to close an assay gap. If two certificates differ by a percentage point, check the basis, the hydrate and the method before changing the molecule. Do not move a printed label from one form to another; the ingredient declaration is part of the product. Do not use L-cystine where solubility is the limiting property, and do not use the hydrochloride where the acidity or the chloride load is the problem, whatever the assay says. The comparison with the acetylated form is on the L-cysteine HCl versus NAC page. The product hub carries the catalog specification; the N-acetyl-L-cysteine page shows the other thiol ingredient in the range; the compliance page covers the market routes. ### 02.1 L-cysteine HCl vs NAC: the salt and the acetylated form URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-cysteine-hcl/grades/l-cysteine-hcl-vs-nac/ Reviewed: 2026-11-20 L-cysteine hydrochloride monohydrate and N-acetyl-L-cysteine are both thiols, but they are not the same molecule. The first is the hydrochloride salt of the free amino acid, 175.64 g/mol and about 69.0% cysteine; the second is the N-acetylated derivative, 163.19 g/mol and declared as NAC. The salt's chloride and water, and NAC's acetyl group, change the assay, the solution, the stability and the label. In one lineL-cysteine HCl and N-acetyl-L-cysteine share a thiol but not a molecule, an assay method or a label, and the salt's chloride and water are part of the specification. ## Two molecules, one functional group L-cysteine has a thiol, an amino group and a carboxyl group. In the hydrochloride, the amino group carries the hydrochloric acid and the carboxyl group stays free; in the monohydrate, one molecule of water sits in the crystal. N-acetyl-L-cysteine keeps the thiol and the carboxyl group but acetylates the nitrogen, so the free amine is gone and an amide takes its place. That is the whole difference, and it is enough. The salt is ionic and water-soluble; NAC is a neutral molecule with an amide. The salt has a counter-ion to declare and a hydrate to name; NAC does not. The two CAS numbers, formulas and molecular weights are separate specification items, and no certificate percentage makes one a substitute for the other. ## The two forms side by side L-cysteine HCl monohydrate against N-acetyl-L-cysteine | Property | L-cysteine HCl monohydrate | N-Acetyl-L-cysteine | CAS number | 7048-04-6 | 616-91-1 | Formula · molecular weight | C3H7NO2S·HCl·H2O · 175.64 | C5H9NO3S · 163.19 | Declared content | 69.0% cysteine | Declared as NAC | Assay | Titration, 99.0–101.0% | HPLC, 98.5–101.5% on the dried basis | Specific rotation | +6.0° to +7.5° (c=2, 5 M HCl) | +21.0° to +27.0° | Solution | Freely soluble; about pH 1.5–2.0 at 5% | Freely soluble; 1% solution pH 2.0–3.0 | Sulfur content | About 18.3% | About 19.6% | Label name | L-cysteine hydrochloride monohydrate | N-acetyl-L-cysteine The table is a starting point, not a substitute for the specification. Each material has its own assay method and its own impurity profile, and the salt's numbers are reported against the salt. A 99% figure for the hydrochloride is not 99% cysteine, and an NAC figure is not a cysteine figure at all. ## Mass, chloride and the label arithmetic The salt's mass conversion is fixed by its formula. A formula that declares 500 mg of L-cysteine base needs 500 ÷ 0.690 = 725 mg of the monohydrate, or 650 mg of the anhydrous salt. A formula that declares 500 mg of L-cysteine hydrochloride is declaring the salt and weighs 500 mg of the salt. The panel and the weigh-up have to use the same form, or the formula is short by the water and the chloride. NAC is declared as NAC. A 500 mg panel figure is 500 mg of N-acetyl-L-cysteine, not 500 mg of cysteine, and the label does not convert. The cysteine skeleton is about 74% of NAC's mass, but that arithmetic is a chemistry exercise, not a label conversion. A formulator who counts NAC as a cysteine source changes the declared ingredient without changing the panel. The chloride is part of the salt's mass. The monohydrate is 20.2% chloride, so 725 mg of the salt carries about 146 mg of chloride. A formula that counts the salt as cysteine ignores both the water of crystallisation and the counter-ion, and the error lands in the ingredient declaration and in the taste. ## Solubility, acidity and the chloride load Both materials dissolve freely in water and both give acidic solutions, but the acids are different. The hydrochloride solution is acidic from the mineral acid; at 5% it is about pH 1.5–2.0. NAC's acidity comes from its carboxyl group, and a 1% solution sits at pH 2.0–3.0. The two are not interchangeable in a drink mix even when the pH looks similar on paper, because the buffering and the chloride load differ. Chloride is the practical constraint on the salt side. A formula that needs a high cysteine dose carries a proportional chloride load, which matters where the taste, the declared minerals or the corrosion of the line is sensitive. NAC carries no chloride, so it can fit a formula where the salt's acidity or chloride is the limiting factor. The matrix decision belongs to the formulator, not to the certificate. ## Stability is a thiol question on both sides Both are thiols, and both oxidise. The hydrochloride converts to L-cystine; NAC converts to its diacetyl disulfide. The rate depends on oxygen, trace metals, pH and heat, and the pack is what slows it. The salt is hygroscopic and carries water of crystallisation, so moisture control and the hydrate question sit on top of the oxidation risk. NAC is specified at loss on drying ≤0.5% and is handled as a crystalline solid. The acidic solution of the hydrochloride keeps more of the thiol protonated, which slows autoxidation relative to a neutral matrix, but it does not stop metal-catalysed oxidation. NAC in a neutral or alkaline matrix forms more thiolate and oxidises faster. Neither form is automatically the more stable choice: the pack, the pH and the metal contact decide, and the stability work has to be done in the finished matrix. The stability page sets out the protocol for the salt. ## What the label has to say The label name is the molecule. “L-cysteine hydrochloride monohydrate” and “N-acetyl-L-cysteine” are separate declarations, and “NAC” is an abbreviation rather than a label name. A product that contains both must declare each one; a panel that says “cysteine” for an NAC lot has named the wrong ingredient. The hydrate belongs in the specification and, where the market requires the full ingredient name, in the declaration. The regulatory routes are also separate. In the EU, E 920 covers L-cysteine hydrochloride and its monohydrate as a flour-treatment additive; it does not harmonise the supplement use, which stays with Member State law. NAC's EU route is its own national question. In the US, L-cysteine has a GRAS entry for dough strengthening and a supplement route, while NAC has a separate history and rulemaking status. The compliance page sets out the salt's file, and the NAC compliance page covers the other one. ## When to choose which Choose the hydrochloride when the label names L-cysteine hydrochloride, the formula can take the acidity and the chloride, and the cysteine content is the basis for the weigh-up. Choose NAC when the label names N-acetyl-L-cysteine and the formula is built on the acetylated molecule. The choice is fixed by the ingredient declaration, then by solubility, pH and stability, and only then by the certificate. Do not substitute one for the other to close an assay gap or a supply gap. A switch needs a new specification, a new label and a new market check, and the mass arithmetic changes with it. The product hub carries the salt's catalog specification; the N-acetyl-L-cysteine page carries the other; the grades page places both in the wider range; the analytical methods index explains the assays; the quality page describes the release workflow. ### 03 L-cysteine HCl is a thiol salt; moisture and oxidation set the shelf life URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-cysteine-hcl/stability/ Reviewed: 2026-11-20 L-cysteine hydrochloride monohydrate is a hygroscopic thiol salt. The dry powder keeps in a sealed, moisture-barrier pack; the solution is the least stable format, where oxygen, trace metals and pH convert the thiol to L-cystine. Heat accelerates both, and the pack and the matrix decide the shelf life. In one lineThe thiol is the shelf-life clock: moisture, oxygen, heat and trace metals convert L-cysteine to cystine, and the pack and the solution pH decide how fast. ## The powder: moisture, colour and odour The catalog sets loss on drying at ≤0.5%. That limit is a release gate, not a storage allowance. The powder is hygroscopic, and once the foil pouch is opened it takes moisture from the air; the powder can cake, the as-is assay falls and the colour dulls. A tight seal and a dry store are part of the specification in practice, even when they are not printed on the certificate. The monohydrate adds a second water question. A full monohydrate carries about 10.3% water of crystallisation, so the certificate should say whether the loss-on-drying figure is free moisture or total water. Storage does not usually remove crystal water from a sealed pack, but a partially dried lot and a fully hydrated lot behave differently in a blend and on a certificate. The COA page covers the water method and the chloride check that separate the two. Odour is a useful but coarse signal. The sulfur smell is intrinsic to the thiol and does not by itself mean a failed lot. A stronger smell, a yellow tint or a low rotation is a reason to ask for the related-substance profile, because the thiol can oxidise to L-cystine while the titration still passes. ## The solution: the least stable format In water, the thiol is the reactive group. The thiolate anion is the species that reacts with oxygen, and its concentration rises as the pH rises. The hydrochloride solution is strongly acidic — about pH 1.5–2.0 in a 5% solution — so most of the thiol is protonated and autoxidation is slower than in a neutral matrix. That is a chemical advantage, not a licence to hold the solution on a bench: trace metals, oxygen and heat still drive the reaction. Iron and copper are the metals to watch. At parts-per-million levels they catalyse thiol oxidation, and a stainless-steel line or a coloured excipient can be the source. Light adds a second route, especially in a clear container. If a liquid is unavoidable, protect it from light, keep dissolved oxygen low, control the pH and validate the hold time before filling. A bulk-powder result does not transfer to a beverage: the matrix, the process and the pack each change the rate. ## What drives degradation Factors that move L-cysteine HCl during storage | Factor | What it does | Control | Oxygen | Oxidises the thiol to L-cystine | Sealed pack; low headspace; process control | Moisture | Raises loss on drying; caking; dilutes the as-is assay | Foil pouch; dry store; liner closed | Trace metals | Catalyse thiol oxidation at low levels | Avoid iron and copper contact; check the metal panel | pH | Raises the thiolate fraction; faster oxidation as pH rises | Keep the matrix acidic; validate the pH | Heat | Accelerates oxidation and moisture damage | Controlled store; cool process | Light | Adds a photochemical oxidation route in solution | Opaque or foil pack; dark store These factors are not independent. A warm, bright, humid store is worse than the sum of three separate effects, and a neutral solution in clear glass combines all of them. The useful question is not whether L-cysteine is stable, but stable in which pack, at which pH and for how long. ## A stability protocol for the ingredient A useful protocol states the pack, the storage condition, the time points and the tests. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% relative humidity cover the warehouse; accelerated storage at 40 °C/75% relative humidity stresses the pack. A light-exposure arm covers the route that a dark incubator misses. Test assay by titration, specific rotation, water or loss on drying, appearance and the related substances at each point, with microbiology at release and at the end. The related-substance test is the one that sees the disulfide; the titration may not move enough to reveal a small fraction of L-cystine. For a solution, repeat the work at the matrix pH and the process heat load, and test the held liquid as well as the powder. Ask for the stability summary for the pack you will buy. A 25 kg fiber drum and a 1 kg foil pouch have different headspace, different opening histories and different surface-to-volume ratios; the data belongs to the pack. ## The finished formula changes the answer A capsule or tablet starts with low water activity, but the shell and the excipients can still move moisture into the fill, so loss on drying and appearance are checked at release and again after storage. The thiol odour is part of the material, and a capsule wall contains it better than a stick pack. A stick pack fails at the seal: a pinhole in the foil is enough, and the strip is inspected as well as the powder. Metal contact is easy to overlook in a powder blend. A mill, a sieve or a coloured excipient can introduce the ions that catalyse oxidation, and the effect may not appear until the finished pack has been stored. The ingredient's bulk data is the starting point, not the finished-product answer. An overage is a label and stability decision, and it does not repair a pack that lets moisture in. ## How the shelf life is set We do not publish a single shelf-life number for L-cysteine HCl, because the pack and the storage condition set it. The assigned retest period belongs on the specification and is supported by the stability file for that pack. A number without a pack, a condition and a test panel is not a shelf life. After the retest period, re-assay the retained sample before extending use. Do not extend by assumption, and do not carry a bulk figure across to a repacked container. The product hub lists the standard packs; the MOQ page covers pack and lead time; the quality page describes the release workflow. ### 04 L-Cysteine HCl: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-cysteine-hcl/moq/ Reviewed: 2026-11-20 The MOQ is 1 kg, supplied as a 1 kg foil pouch; the bulk pack is a 25 kg fiber drum. Lead time is 1–7 days for the standard 80 mesh powder, with granulated material on request. A firm quotation needs the form and hydrate, the assay basis, the pack, the destination and the documents. In one lineThe minimum is one kilogram because the pack, not the chemistry, sets the smallest unit that can be released, sampled and traced. ## Why the minimum is 1 kg A 1 kg pack covers a bench trial, a retained sample and an independent identity test. It is small enough to ship as a parcel and large enough to carry a lot code, a certificate and a sample that can be re-tested later. That combination is what makes it a qualification unit rather than a scoop from a bulk drum. Below 1 kg, the material is usually split from a larger lot and repacked. The split adds handling, loses the original pack identity and makes traceability harder without changing the chemistry. The 25 kg drum is the bulk unit: it reduces handling per kilogram but commits inventory and a longer storage period. The MOQ is a pack decision, not a volume incentive. ## Packs and formats Standard L-cysteine HCl packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal or transfer after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Particle profile changes; lead time may move The catalog form is an 80 mesh powder: ≥95% through 80 mesh. Granulation is a different particle specification, not a packing choice, and the mesh or granulation belongs on the purchase order. The powder is hygroscopic, so the pack has to stay closed in storage; a pouch that has been folded over is not the same barrier as a heat-sealed one. ## Lead time and dispatch The standard pack is quoted at 1–7 days from order confirmation. That window covers picking, document preparation and dispatch; it does not include the shipping transit, customs clearance or the customer's own quality release. A granulated lot or a non-standard pack adds time, and the quotation should state it separately. Ask for the dispatch date, not just the 1–7 day range. A 1 kg pouch usually moves as a parcel, while the 25 kg drum travels on a pallet; the Incoterm says who books the freight and who clears entry. The COA and the rest of the lot documents should travel with the pack, not follow it. ## What a quotation needs Six items make a quotation firm enough to compare: - Product, form and hydrate. L-cysteine hydrochloride monohydrate, CAS 7048-04-6, with the water of crystallisation named. - Specification. Assay and basis, specific rotation, chloride and water, mesh, heavy metals and microbiology. - Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated variant. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, specification, SDS, and any market-specific statement the importer needs. - Intended use and market. Supplement, food or another use, and the market where it will be sold. A quotation without the hydrate and the market is incomplete. The same powder can suit one destination and sit outside the file for another, and the paperwork is part of the offer. Commercial terms are stated on the quotation, not on this page. ## The sample is a lot, not a demonstration The 1 kg pack is the qualification sample. Test identity, assay, specific rotation, water, chloride and microbiology before scaling, and keep a retained sample from the same pack. The lot code on the sample, the COA and the quotation should match. A sample that cannot be traced to a lot is a demonstration, not a qualification. Cysteine hydrochloride is hygroscopic and oxidation-prone, so a sub-kilogram trial is normally a repack from a bulk lot rather than the standard foil pouch. The repack gets its own handling record and lot code; ask for the split in writing and keep that code with the trial results. The bench powder and the production drum can come from different lots even when both meet the same specification. ## Terms to settle before the first order The quotation should show the commercial terms and the quality terms on one page: Incoterm, pack, dispatch window, specification revision, a COA for each lot, the retained sample, the retest period and the route for a change of source, hydrate or mesh. Settle those in a quality agreement before the first production order; the same conversation is harder after a dispute. If a lot misses the agreed specification, the route is the retained sample and a joint re-test against the named method, not a photograph of the drum. The quotation and the quality agreement should say who pays for the referee laboratory and which laboratory both sides accept. A return decided on appearance or odour alone is hard to defend on either side. The product hub carries the catalog specification; the COA page lists the release tests; the compliance page covers the market files; the MOQ glossary entry defines the term; the quality page describes the release workflow. ### 05 Where L-cysteine HCl is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-cysteine-hcl/compliance/ Reviewed: 2026-11-20 L-cysteine hydrochloride sits on two different routes in the EU: E 920, the flour-treatment additive, and the supplement ingredient, which is not harmonised and depends on Member State law. In the US, L-cysteine has a GRAS entry for dough strengthening and a dietary-supplement route for the amino acid. The UK applies retained law in Great Britain and the EU regime in Northern Ireland. The file has to name the route and the form. In one lineThe additive entry and the supplement entry are two different routes, and the L-cysteine file has to name which one the destination market uses. ## The four checks Selling an L-cysteine HCl lot raises four questions that are often conflated: is the substance permitted, and on which route; which contaminant ceiling applies at the daily dose; does the label declare the form and the hydrate correctly; and is the statement an authorised claim, a structure/function statement, or not allowed at all? The answers do not travel together. A flour-treatment entry is not a supplement authorisation, and a supplement route in one Member State is not a route in another. The form matters twice. The additive definition covers the hydrochloride and its monohydrate; the supplement file has to name the same hydrate that the certificate reports. The buyer's regulatory team confirms the destination route, and this page lists the documents and checks that belong in the file. Check the current text before relying on any date here. ## European Union Directive 2002/46/EC harmonises food supplements for vitamins and minerals; its Annex I and Annex II list those substances, not amino acids. L-cysteine as a supplement ingredient is therefore regulated mainly through Member State law and the general food rules, including the food–medicine borderline. Member States differ on which amino acids and doses they accept, so the destination country is the first check, not the last. The additive route is separate. Regulation (EC) No 1333/2008 and its implementing list in Regulation (EU) No 1129/2011 authorise E 920, L-cysteine, as a flour-treatment agent at quantum satis in the bakery uses listed. Commission Regulation (EU) No 231/2012 defines E 920 as L-cysteine hydrochloride or hydrochloride monohydrate and states that human hair may not be used as a source. That entry covers the additive use; it does not authorise a supplement dose, and it does not settle the supplement route in a given Member State. Labelling follows Regulation (EU) No 1169/2011 and the supplement particulars in Directive 2002/46/EC; claims follow Regulation (EC) No 1924/2006. The EU regulatory note collects the framework references. ## United States In the US, 21 CFR 184.1271 lists L-cysteine as GRAS for use as a dough strengthener in yeast-leavened baked goods, at up to 0.009 part of total L-cysteine per 100 parts of flour in dough. That regulation covers a food use. A supplement relies on the amino acid as a dietary ingredient, and the label follows the Supplement Facts panel in 21 CFR 101.36. L-cysteine has no Daily Value, so the panel declares the amount per serving without a percentage. A structure/function statement must be truthful, not misleading and substantiated, and must sit beside the DSHEA disclaimer under 21 CFR 101.93. There is no federal maximum for lead in supplements; state law can add one, and California's Proposition 65 sets a maximum allowable dose level of 0.5 µg/day for lead. The US regulatory note sets out the framework. ## Contaminants and limits The contaminant panel is a finished-product calculation, not only a drum result. The table is the usual starting point for a food-supplement file; the destination text and the daily dose decide the final limit. Contaminant limits to confirm for the finished product | Parameter | Typical supplement reference | What the file should show | Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method, limit and the finished-product calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception | Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result and method | Arsenic (As) | No harmonised EU number; the buyer sets one | The agreed limit and the method on the certificate The catalog raw-material gate is Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg. Whether that gate is adequate depends on the dose and on the share of the formula; a raw-material result cannot be pasted onto the finished label. ## Claims and labelling The EU claim register under Regulation (EC) No 432/2012 authorises only the listed wording and conditions. No L-cysteine claim appears there as of this review, and L-cysteine has no EU nutrient reference value to anchor a “source of” nutrition claim. In the US, a structure/function statement is written and substantiated by the brand and carries the DSHEA disclaimer; it is not an FDA approval and cannot describe a disease or a medicinal use. In the UK, the GB nutrition and health claims register performs the same role, and no L-cysteine claim appears there as of this review. The label should name the form and the hydrate: L-cysteine hydrochloride monohydrate, not “L-cysteine” or an abbreviation alone. A product that also contains NAC or L-cystine must declare each form separately. Nothing on this page is a claim for the ingredient. ## The document pack A complete lot file usually contains: - A lot COA with assay by titration and its basis, specific rotation with conditions, infrared and titration identity, water, chloride, mesh, metals and microbiology. - A TDS, a purchase specification naming the form, hydrate and mesh, and a 16-section SDS. - Allergen, GMO, origin, residual-solvent and animal-derived input statements. - An elemental-impurity report against the destination limit at the intended dose. - Stability data for the grade and pack, and the storage condition on the TDS. - An EU market note recording the additive and supplement routes, and an independent COA where required. The source statement is not boilerplate. The E 920 definition excludes human hair as a source for the additive, and the supplement file should record whether the lot comes from hydrolysis, enzymatic synthesis or fermentation. The COA page shows the parameters the file has to support, and the identity page explains how the form is proved. ## What to check before the first order - Which market will sell the product, and which route is documented there? - Does the COA name the salt and the hydrate, and report rotation and chloride, not only the assay? - Are the metal figures below the destination ceiling at the actual daily dose? - Does the label name the form and the hydrate, and avoid an NRV it does not have? - Is every claim inside the authorised wording or a properly disclaimed structure/function statement? - Is the lot file complete and lot-coded, with the additive and supplement routes recorded separately? The product hub carries the catalog specification, the quality page describes how the lot file is assembled, and the MOQ page covers the pack and the quotation. ### 06 How we prove an L-cysteine HCl lot is the hydrochloride URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-cysteine-hcl/identity/ Reviewed: 2026-11-20 An L-cysteine hydrochloride lot is the named material when the document, the rotation, the chloride and the water agree. The rotation assigns the L configuration, the titration measures the salt, chloride shows the hydrochloride and the water figure separates the monohydrate from the anhydrous form. The assay alone cannot prove any of that. In one lineIdentity is the agreement of four measurements: rotation for the L form, titration and chloride for the hydrochloride, and water for the hydrate. ## The identity layers A certificate can name the right material and still fail to prove it. The layers below are separate questions, and each one needs its own evidence. A supplier who answers only the first has described the paperwork, not the powder. Layers of L-cysteine HCl identity | Layer | Question | Test | What it proves | Document | Is the form and hydrate named? | Name, CAS number, formula | Paperwork only | Rotation | Is it the L enantiomer? | Polarimetry at stated conditions | Configuration | Titration | Is it the hydrochloride, and how much? | Titration with method and basis | Quantity of the salt | Counter-ion | Is the counter-ion chloride? | Chloride by titration or ion chromatography | The salt stoichiometry | Water | Is it the monohydrate? | Loss on drying or Karl Fischer | The hydrate | Functional group | Is the molecule cysteine? | Infrared and thiol reaction | The amino acid skeleton ## The chloride-to-cysteine ratio Chloride and the assay are the two numbers that make the salt check. For the 1:1 hydrochloride, the mass ratio of chloride to cysteine is about 0.29 whether the salt is hydrated or not: the monohydrate is 20.2% chloride and 69.0% cysteine, and the anhydrous salt is 22.5% and 76.9%. The ratio tests the stoichiometry, while the absolute chloride figure tests the hydration. A ratio below 0.29 points to free base or a non-chloride diluent, because the cysteine fraction rises while the chloride falls. A ratio above 0.29 points to added chloride, such as sodium chloride, which raises chloride and ash and lowers the assay. The absolute figure separates the two hydrates: near 20.2% is the monohydrate, near 22.5% the anhydrous salt, and a figure between them suggests a partly dried lot. Chloride by argentometric titration or ion chromatography is not on the catalog release table, so request it when the form or the hydrate is disputed. The assay alone cannot see the counter-ion, and a blend can be built to land inside the titration range. ## X-ray diffraction and the solid state X-ray diffraction answers a different question: is the solid crystalline, and does its pattern match a reference? The monohydrate and the anhydrous salt can give different patterns, so a pattern match can support the hydrate claim. XRD can also tell a crystalline lot from an amorphous dilution. It is not a purity assay and it does not measure the counter-ion. Ask for the reference pattern and the detection limit before reading a “match” statement. For a disputed lot, XRD plus chloride plus water is stronger than any one of them. XRD is not a routine release test for this product, and a certificate that reports only “XRD conforms” without the pattern has added little. ## What adulteration looks like Substitutions in an L-cysteine HCl lot and the signals | Adulterant | What changes | Signal | Test | Free base L-cysteine | Chloride falls towards zero; pH rises | Low chloride and a low ratio | Chloride, pH | L-cystine | Disulfide form; solubility falls | Low chloride; cystine peak; poor dissolution | HPLC related substances, chloride | D-cysteine | Wrong configuration | Rotation below the window or negative | Polarimetry, chiral HPLC | Sodium chloride | Chloride and ash rise; assay falls | High chloride; sodium present | Chloride, ICP-OES, residue on ignition | Water | As-is assay falls; caking | High loss on drying or water | Loss on drying, Karl Fischer Colour and odour are the weakest signals. White to off-white and a sulfur smell cover a wide range, and both the free base and the hydrochloride can produce them. The stronger signals are the rotation, the chloride ratio and the water figure. A certificate that reports appearance and assay but not identity has left the most likely substitution untested. ## How to write the identity into the specification - “L-cysteine hydrochloride monohydrate, CAS 7048-04-6, C3H7NO2S·HCl·H2O.” - “Assay 99.0–101.0% by titration, with the basis stated.” - “Specific rotation +6.0° to +7.5° (c=2, 5 M HCl), with temperature and path length.” - “Chloride about 20.2% and water about 10.3%, where the monohydrate is to be confirmed.” - “Identification by infrared and titration; thiol reaction positive.” - “Loss on drying ≤0.5% with the water method named; ≥95% through 80 mesh.” - “No free base or L-cystine above the agreed limit; source route declared.” ## Six questions for the supplier - Which hydrate is this lot, and which CAS number is on the certificate? - What are the solvent, concentration, path length and temperature for the rotation? - What is the chloride result, and which method produced it? - Is the water figure loss on drying or total water by Karl Fischer? - Can you provide the infrared spectrum and the chiral HPLC chromatogram, not only the assay percentage? - If the lot is disputed, will you accept a joint re-test on the retained sample? Six direct answers amount to an identity file. A single assay percentage does not. The product hub carries the catalog specification; the COA page shows where each figure sits on the certificate; the grades page compares the salt with the free base and L-cystine; the level-four comparison covers NAC; the analytical methods index explains the tests; the quality page describes the release workflow. ### 01 What the COA for L-lysine free base actually contains URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-lysine/coa/ Reviewed: 2026-11-20 A free-base L-lysine certificate is shorter than the hydrochloride sheet: appearance, IR, titration, rotation, loss on drying, particle size, metals and micro, with no chloride or pH line. The catalog ranges are 98.5–101.5% for the titration and +25.0° to +27.0° for the rotation at c=2 in 5 M HCl. The ranges are release gates; the lot COA records what a named pack measured. In one lineThe titration states how much lysine is present, the rotation states which enantiomer it is, and the absent chloride line states which form was packed. ## Reading the release sheet Each row should carry the test, the method and the limit it was judged against. A tick alone asks the reader to accept a verdict. The table is the catalog gate, not a batch record. Catalog release lines · L-lysine free base | Item | How it is measured | Catalog limit | Appearance | Visual | White to off-white, free-flowing powder | Identification | IR and titration | Matches the reference | Assay, as L-lysine | Titration | 98.5–101.5% | Specific rotation | Polarimetry, c=2, 5 M HCl | +25.0° to +27.0° | Loss on drying | Gravimetric | ≤0.5% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve | ≥95% through 80 mesh No chloride row appears because there is no counter-ion to measure. A free-base sheet that reports 19.0–19.6% chloride has borrowed the hydrochloride lines, and a certificate that shows chloride and a pH of 5.0–6.0 is describing the salt. The form belongs on the certificate, not only in the product title. ## What the assay is calculated as The titration is expressed as L-lysine, not as the hydrochloride. A result of 99% as the base and a result of 99% as the salt are not the same amount of lysine: the base is the entity, while the salt carries 0.80 g of it per gram. A buyer who applies the molecular-weight factor to a base result is converting a number that is already on the lysine basis. The certificate should say as-is or dried. At a loss on drying of ≤0.5% the gap is half a point at most, but the basis is part of the result. A wet lot can pass a dried-basis gate while the drum holds less lysine than the label expects. IR identifies the amino acid; the rotation at c=2 in 5 M HCl identifies the enantiomer. The acid puts the base into solution as the hydrochloride, so solvent, concentration, temperature and wavelength all belong beside the angle. Chiral HPLC is the alternative when the ratio, not the angle, is the question. ## Limit and result are different columns The limit is what the lot had to meet; the result is what it met. Printing the specification range in the result column reports the gate twice and the lot not at all. What the lot column should carry | Test | Limit | Lot column | Assay | 98.5–101.5% as the base | A percentage, with basis and method | Specific rotation | +25.0° to +27.0° | The angle and its conditions | Loss on drying | ≤0.5% | A measured figure | Heavy metals | Per element | A figure per element, in mg/kg | Microbiology | Counts and absence | The count plus the absence line | Particle size | ≥95% through 80 mesh | The measured pass percentage “Conforms” is a verdict, not a measurement. Metals need a figure per element; a total can hide the one that matters. Micro needs a count and an absence statement. Rotation needs the angle and its conditions, or the result cannot be compared with another laboratory's report. ## Batch-to-batch drift Crystallisation and drying leave marks on the assay, the rotation and the water content. The rotation should stay inside the L window; a slide toward zero can mean racemisation or a DL blend. Loss on drying is partly production and partly storage, and the free base is hygroscopic enough that the two blur after a long warehouse stay. Milling changes the particle-size result without changing the chemistry. The catalog grade passes 80 mesh, about 180 µm; a granulated grade is a separate specification. Colour is the least numerical line and often the first warning: a tan cast can follow an overheated dryer or a trace of iron while the titration stays in range. A chloride line on a base certificate is a paperwork finding before it is a quality finding. The document should follow the material that was packed. ## Independent testing A new source, a new market, a disputed form claim or a contested result are the usual reasons to go outside. Build the panel around the form question rather than repeating the supplier's sheet. Titration on a stated basis, rotation with conditions, IR, loss on drying, chloride by ion chromatography or argentometric titration, ICP-MS for the metals and the microbiological set cover the essentials. Chiral HPLC is the add-on when the enantiomer ratio matters. Chloride is the form test: the base should show none, while 19.41% is the hydrochloride's theoretical share. Every “not detected” needs its detection limit. The laboratory should test the retained sample and quote the lot code on the report. If the result is contested, the referee needs the retained sample, the certificate and the specification, and a request for the tests that separate the forms. ## Supplier comparison Questions that separate two free-base quotations | Question | What to ask for | Why the answer matters | Form and CAS | L-lysine free base, 56-87-1 | Separates the base from the salt and from DL-lysine | Assay and basis | Titration, as-is or dried, as the base | A salt figure or a salt basis is a different number | Rotation | Angle and conditions | Confirms L and optical purity | Chloride | Result or absence, with method | Shows whether the salt is present | Water | Loss on drying and method | Shows the as-is assay and the storage risk | Particle size | 80 mesh or agreed distribution | Affects flow and fill | Contaminants | Results for the lot, against the limits | Confirms the batch met the panel | Chain | Lot code, maker and retention sample | Ties the document to the drum The product hub holds the catalog specification. The hydrochloride is a separate product on the hydrochloride page. For the analytical evidence, see the identity page; for release, the quality page; for the methods, the methods library. ### 02 L-lysine free base or hydrochloride: choosing the form URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-lysine/grades/ Reviewed: 2026-11-20 There are two L-lysine products, not two strengths of one product. The free base is the amino acid itself, CAS 56-87-1, 146.19 g/mol; the hydrochloride is the salt, CAS 657-27-2, 182.65 g/mol, of which about 80% is lysine and 19.4% is chloride. A label that names L-lysine and a fill that cannot spare 25% extra powder point to the base; a pH 5–6 solution and a crystalline blend point to the salt. The choice belongs before the artwork. In one lineThe base delivers the full lysine mass with no chloride, but it is alkaline and hygroscopic; the salt is easier to handle and adds 25% mass. ## Why there are two products L-lysine has two amino groups, and the hydrochloride is formed by adding one equivalent of hydrochloric acid to the base. That gives a crystalline salt with a counter-ion, a lower pH and a known chloride content. The base has no counter-ion mass, so it delivers more lysine per milligram, but it is more hygroscopic and its solution is alkaline. The catalog free base is a powder at ≥95% through 80 mesh; a granulated grade can be quoted on request. Mesh is a second decision, separate from the form: it changes flow and dust without changing the molecule. Write both into the specification. ## The two forms against each other L-lysine free base and L-lysine hydrochloride | What changes | Free base | Hydrochloride | Ingredient name | L-lysine | L-lysine hydrochloride | CAS number | 56-87-1 | 657-27-2 | Molecular weight | 146.19 g/mol | 182.65 g/mol | Lysine in one gram | 1.00 g | 0.800 g | Counter-ion | None | Chloride, 19.4% by mass | Solution reaction | Alkaline | pH 5.0–6.0 at 5% | Water uptake | Higher | Lower, but still hygroscopic | Assay line | 98.5–101.5% by titration, as the base | 98.5–101.5% by titration, dried basis, as the salt Read the last row before comparing two quotations. A “99%” figure on a base certificate and a “99%” figure on a salt certificate describe two different powders with two different lysine contents. The form and the basis have to match before the percentages can be compared. ## Water, alkalinity and flow Water uptake is the first practical difference. The base is more hygroscopic than the salt, so it needs a tighter seal, a faster weigh-up and a storage record. A base left open in a humid room cakes before the assay moves; the loss on drying is the early signal, and the pack is the control. The alkaline solution is the second difference. In a drink, an acid will consume part of the base and move the finished pH; in a sealed acidic powder, carbon dioxide taken up by the base can be released and change the pack. The salt is specified at pH 5.0–6.0 for a 5% solution, which is easier to place in a mildly acidic formula but is not neutral either. Flow is the third. An 80 mesh base powder flows well for capsule filling and blending; a granulated grade reduces dust and changes the dissolution profile. Neither change alters the form or the label. ## The dose and the fill The base delivers lysine one-for-one. The salt delivers 0.800 g of lysine per gram, so the salt weight is 1.25 times the lysine figure. A label that declares 600 mg of lysine needs 600 mg of the base or 750 mg of the hydrochloride. A 600 mg capsule of the salt delivers about 480 mg of lysine. Lysine declared and the mass to weigh | Lysine on the label | Free base | Hydrochloride | 300 mg | 300 mg | About 375 mg | 600 mg | 600 mg | About 750 mg | 900 mg | 900 mg | About 1,125 mg The extra 25% of salt has to fit the dosage form. A tight capsule may not have the space; a sachet or a beverage powder usually has more. In a tablet, the alkaline base can change the granulation pH and the excipient choice, while a conventional wet granulation is more straightforward with the salt but still needs a moisture limit. Gummies and chews are decided by their water activity and heat process as much as by the form. ## What the specification should say - “L-lysine free base, CAS 56-87-1, C6H14N2O2; not the hydrochloride.” - “Assay 98.5–101.5% by titration, as the free base; state as-is or dried.” - “Specific rotation +25.0° to +27.0° at c=2 in 5 M HCl, with temperature and wavelength.” - “IR identification, loss on drying ≤0.5%, metals and microbiology as listed.” - “Particle size ≥95% through 80 mesh, or the agreed granulated grade.” - “Label to name L-lysine and to state whether the quantity is the base or the lysine.” A specification copied from the hydrochloride is not a base specification. The rotation conditions, the chloride line and the pH range belong to the salt; the base has its own set. ## When the other form is the better fit Do not pick the base for an acidic, sealed powder with no headspace, or for a formula that cannot tolerate an alkaline surface. Do not pick the salt when the label reads “L-lysine” and the dose is declared as lysine, unless the artwork is changed to name the salt. Do not change form to solve flow: mesh and granulation are the right levers, and switching the form creates a labelling problem in place of a hopper problem. The catalog product is the free base at 80 mesh. The product hub carries the specification; the hydrochloride page covers the other form; the level-four comparison covers chloride, pH and the label in detail; the COA page shows how the lines are reported; the stability page covers water and packaging; the methods library describes the tests; the quality page covers release. ### 02.1 L-lysine free base vs L-lysine HCl: chloride, pH and the label URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-lysine/grades/l-lysine-vs-l-lysine-hcl/ Reviewed: 2026-11-20 The hydrochloride is the free base plus one equivalent of hydrochloric acid. The addition changes three things that matter commercially: the powder is 19.4% chloride by mass, its 5% solution sits at pH 5.0–6.0 instead of being alkaline, and the ingredient name on the label must say “hydrochloride”. The lysine itself is the same; the weight, the acidity and the name are not. In one lineChloride adds mass and acidity, so the same lysine dose is heavier as the salt, and the label must name the form in the drum. ## Chloride: the extra mass Chloride accounts for 35.45 of the salt's 182.65 g/mol, or 19.41%; the specification range is 19.0–19.6%. The free base has no counter-ion, so its release sheet has no chloride line at all. A base lot that shows 19% chloride is the salt, or a blend containing it. A salt lot that shows little or no chloride is not the salt, whatever the titration says. The measurement is ion chromatography or argentometric titration. Chloride is both a form check and a mass check: it is the fraction of the powder that carries no lysine. The result should be read beside the assay, not in a separate file, because the two together describe what the powder is made of. Chloride is not a purity measure. A chloride-free result says only that the HCl counter-ion is absent; it does not say the powder is pure, dry or the right enantiomer. Those questions belong to the rotation, the loss on drying and the titration. ## pH: alkaline base, acidic salt The salt is specified at pH 5.0–6.0 for a 5% solution. The base is alkaline, well outside that window. In a drink, an acid will consume part of the base and lower the finished pH; in a sealed acidic powder, the base can take up carbon dioxide and release it later, changing the pack; in a wet granulation, the alkaline surface can shift the binder and excipient choice. The salt pulls a formula toward its own pH window, which is why it is the easier starting point for an acidic drink or a conventional granulation. That does not make it neutral: pH 5–6 is still acidic enough to matter in a delicate matrix, so measure the finished product pH rather than inferring it from the ingredient sheet. pH is supporting evidence, not an assay. It moves with concentration, residual acid or base and carbon dioxide uptake, so one reading cannot prove the form. Use it with chloride, rotation and titration. ## The mass: 1.25 and 0.800 One gram of free base delivers one gram of lysine. One gram of the salt delivers 146.19 ÷ 182.65 = 0.800 g of lysine, so the salt weight is 1.25 times the lysine figure. A label that declares 500 mg of lysine needs 500 mg of the base or 625 mg of the hydrochloride. A 500 mg capsule of the salt delivers about 400 mg of lysine. Lysine declared and the mass of each form | Lysine declared | Free base to weigh | Hydrochloride to weigh | 400 mg | 400 mg | About 500 mg | 800 mg | 800 mg | About 1,000 mg | 1,000 mg | 1,000 mg | About 1,250 mg The extra 25% has to fit the dosage form. A tight capsule may not have the space; a sachet or a beverage powder usually does. The label arithmetic and the fill weight should be signed off together, because a change in form moves both. ## The label: naming the form In the EU, the ingredient list names the ingredient used: “L-lysine” for the base and “L-lysine hydrochloride” for the salt. A quantitative statement should say whether the number refers to the base, the salt or the lysine entity, or the reader cannot reproduce the dose. Great Britain's retained food-information rules apply the same naming principle, while Northern Ireland uses the EU text. In the US, Supplement Facts lists “L-lysine”; if the salt is used, it appears in parentheses after the lysine entry, and the declared quantity is lysine. Lysine has no Daily Value, so the panel carries no percentage. A label that names L-lysine while the drum is the salt would declare 500 mg of lysine from 500 mg of salt, which delivers about 400 mg. Claims are separate from the name. In the EU, no authorised health claim for lysine is listed as of this review. In the US, structure/function language needs substantiation and the DSHEA disclaimer. A compositional statement is not a health claim, yet it still needs to agree with the certificate and the form. ## Which formula fits which Where a capsule or tablet has little room, the base has the advantage: a given dose occupies about a fifth less powder than the salt. The trade-off is the alkaline surface, faster water uptake and the ingredient name. A wet granulation usually runs more easily on the salt, whose crystals are less alkaline and flow well, but it still requires a moisture limit and a drying stage. A sachet or a drink mix usually starts from the salt, because it dissolves readily, the solution sits near pH 5–6, and chloride is included in the weighed mass. A base in an acidic drink consumes acid and can change the flavour balance. Gummies and chews need a trial in the actual matrix, where water activity, heat and reducing sugars can matter more than the form. ## Switching form is a change control A switch is not a substitution at the balance. It needs a new specification with the other CAS number, a dose recalculation, a finished-product pH check, a stability review and new artwork. The COA lines change too: the salt has chloride and a pH line, while the base is read through its rotation and titration. Do not switch to repair a flow or fill-weight problem without checking the label. Mesh and granulation are the tools for flow; the form is a labelling and formulation decision. If the label names L-lysine, the base is the matching material; if it names the hydrochloride, the salt is. The free base hub and the hydrochloride hub carry the two specifications. The grades page sets the comparison in context; the COA page shows how the form appears on the certificate; the quality page covers change control; the methods library describes the tests. ### 03 L-lysine free base: water, carbon dioxide and the pack URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-lysine/stability/ Reviewed: 2026-11-20 L-lysine free base is hygroscopic and alkaline, and those two properties set its storage behaviour. The dry powder is stable in a closed, dry pack; water, carbon dioxide, heat and reducing sugars are the things that change it. A solution is the more demanding format because pH, heat and sugar act at once, and the finished matrix decides how long the product keeps. In one lineThe powder's enemies are water, carbon dioxide and heat; the formula's sugar and pH decide how quickly the shelf life is used up. ## The powder in storage A sealed pack is the first control. The free base takes up water more readily than the salt, so the loss on drying climbs after opening, the as-is assay drops and lumps begin to form. The 0.5% limit is a release gate, not a budget for storage: a lot released near the limit has less room before it exceeds the limit. Carbon dioxide is the second ingress. The alkaline powder can absorb it from the air, and a sealed acidic blend can later release gas and change the pack. Keep the material closed, dry and away from acids, and let a cold pack reach room temperature before opening so condensation does not form on the powder. A desiccant can help in a humid room, but it does not repair a broken seal. Light is not the main risk for this material; the pack is there for water and carbon dioxide. ## In solution The base dissolves freely and leaves an alkaline solution. Lysine's side-chain amino group reacts with reducing sugars under heat in the Maillard reaction, so a sweet drink or a sugar-containing stick pack browns and loses lysine. The rate rises with temperature, with pH and with the amount of reducing sugar available. An alkaline solution also supports microbial growth unless the formula and the process control it. Validate the hold time in the real matrix, measure the finished pH, and keep the vessel closed to limit carbon dioxide pickup. A preservative system designed for an acidic drink may not behave the same way at alkaline pH, and a bulk-powder result does not predict a beverage. ## What moves the material Storage and formula factors · L-lysine free base | Factor | Effect | Control | Water | Loss on drying up; caking; lower as-is assay | Sealed pack; dry room; desiccant if needed | Carbon dioxide | Carbonate formation; pH drift; gas in a sealed pack | Keep closed and separate from acids | Heat | Faster water uptake and faster browning | Cool store; controlled process temperature | Reducing sugar | Maillard reaction; colour and lysine loss | Sugar choice; water activity; heat control | pH | Alkaline solutions react faster | Measure and buffer the matrix | Iron and copper | Catalyse browning at trace levels | Avoid contact; keep the metal panel in view These factors compound. A warm, humid room with an open pouch combines water and heat; a sweet, alkaline drink in a hot fill combines sugar, pH and heat. The question is not whether L-lysine is stable in general, but how long it lasts in a defined pack, at a defined condition, in a defined matrix. ## A stability protocol Test the pack that will be sold. Three conditions are conventional: 25 °C with 60% RH for long-term storage, 30 °C with 65% RH as the intermediate arm, and 40 °C with 75% RH for acceleration. At each time point, measure assay, specific rotation, loss on drying, appearance and microbiology. For a stick pack or a drink, run the work in the real matrix, using the process pH and the heat load, with a sugar-containing and a sugar-free variant where a reducing sugar is present. Report individual numbers rather than a pass mark, and name the pack and the lot family. Light exposure is not the priority here; water and heat are. The summary has to belong to the pack you will buy. A drum and a pouch are not interchangeable in a stability file: their surface-to-volume ratio, headspace and opening history differ, and those differences belong in the data, not in a footnote. ## How the formula changes the answer Capsules and tablets keep water activity low, but the shell and the excipients can still transfer moisture to the fill, so loss on drying is measured at release and repeated after storage. The alkaline base can also affect a wet granulation, which makes the process pH and the drying step part of the trial. A stick pack is only as good as its seal. One pinhole in the foil is enough, so the strip is checked too, not just the powder. If the stick is sweetened with a reducing sugar, the Maillard combination sits in a small package with a large surface area. A drink adds pH, heat and a preservative system; a gummy adds high water activity and a heat step. In each case the bulk result is a starting point, not the answer. ## Setting the retest period We do not quote one shelf life for all packs. The retest period depends on the container and the store, and it is supported by the file for that combination. Without those two details and the test list, a figure cannot be used. Once the retest period ends, test the retained sample again before extending use. Extension needs data, not assumption; a bulk figure cannot simply be copied to a repacked container. Standard packs are listed on the product hub. Release tests are on the COA page; pack sizes and lead time are on the MOQ page; the form choice is on the grades page; the other form is on the hydrochloride page; the methods library explains the tests; the quality page describes release and retest. ### 04 L-lysine free base: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-lysine/moq/ Reviewed: 2026-11-20 L-lysine free base ships from a 1 kg foil pouch, with a 25 kg fiber drum for production, and the standard dispatch window is 1–7 days. Because the powder is hygroscopic and alkaline, the liner and the opening record are part of what you buy. A usable quotation names the free base and its CAS, the assay basis, the pack, the destination, the documents and the intended use. In one lineOne kilogram is the minimum because a smaller split loses the lot identity before the material reaches the bench. ## Where the 1 kg minimum comes from A kilogram covers a bench trial, a retained sample and an independent check, and it moves as a parcel rather than a pallet. It is also a lot with its own code; a smaller amount is a repack from someone else's lot. Repacking adds a handling step, breaks the link between the original pack and the trial, and does not change the chemistry. The 25 kg drum lowers the handling per kilogram but locks up inventory and storage time. The minimum follows from traceability, not from a sales target. ## Packs and formats Standard L-lysine free base packs | Pack | Net weight | Use | Note | Foil pouch | 1 kg | Trial and small batch | Moisture barrier; close after use | Fiber drum | 25 kg | Production | Liner and lot code | Granulated | On request | Flow and dust control | New mesh specification | Split | On request | Trial under 1 kg | Own handling record The catalog powder passes 80 mesh. A granulated or finer-milled grade is a new specification rather than a packing option; it changes the particle-size line and can change the lead time. If the fill needs a coarser powder, say so before the quotation so the sample and the production pack are the same material. Because the base takes up water more readily than the salt, the pouch is functional packaging. Keep the liner closed, store the drum on a pallet in a dry room, and write the opening date on the pack. A clear jar loses both the moisture barrier and the lot identity. ## Lead time and dispatch The standard pack dispatches in 1–7 days after confirmation. That covers picking, documents and handover to the carrier, not the transit, the customs clearance or the customer's release. Custom granulation, a repack or a non-standard pack add their own time, quoted separately. Ask for the dispatch date, not only the range. A pouch normally moves as a parcel and a drum on a pallet; the Incoterm settles who books the freight and who clears customs. Lot papers should accompany the goods, not follow them. ## What a quotation needs Six details make two quotations comparable: - The material. L-lysine free base, CAS 56-87-1, named in full. - The specification. Assay with its basis, rotation, loss on drying, mesh, metals and micro. - The pack and amount. Pouch, drum, granulated grade or split. - The destination and Incoterm. Country, delivery point and trade term. - The paperwork. COA, specification, SDS and any importer statement. - The application. Supplement, food or another use, and the country where it will be sold. Without the form, “L-lysine” could mean the base or the salt, and the two have different CAS numbers and different lysine per gram. Commercial terms belong on the quotation, not on this page. ## Qualifying with a real lot The pouch that arrives for qualification is the lot that matters. Before scaling, check identity, assay, rotation, water and micro, and hold back a retained sample from the same pouch. If the sample, the COA and the quotation do not share a lot code, the material is a demonstration, not a qualification. A trial under 1 kg is a split; request it in writing and keep its code with the results. The bench sample and the production drum can carry different lot numbers even when both meet the same specification. A split is a legitimate way to start, but it is a different pack with a different history, and the trial report should say so. ## Terms to settle before the first order Put the commercial and quality terms on one page: Incoterm, pack, dispatch window, specification revision, a COA for each lot, the reference sample, how long it can be used, and the change route. A quality agreement signed before the first production order is easier than the same discussion after a problem. When a lot misses the agreed specification, the first step is a joint retest of the retained sample using the named method. The quality agreement should name the referee laboratory and settle who pays. A return decided from a photograph is not a result. The product hub holds the catalog specification and packs. The hydrochloride page describes the other form. Test lines are on the COA page; market documents are on the compliance page; the methods library explains the methods; the quality page covers release. ### 05 The regulatory file for L-lysine free base URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-lysine/compliance/ Reviewed: 2026-11-20 L-lysine free base is the amino acid CAS 56-87-1, sold as a food ingredient. The specification and COA describe the material; the market route, the ingredient name and the claim review are separate. In the EU, amino acids do not follow the harmonised vitamin-and-mineral route; in the US, L-lysine is a dietary ingredient. The buyer's regulatory team confirms the finished-product position. In one lineThe file has to show the free base by name and CAS, and the label has to name the same form the specification describes. ## What the file holds The file has four parts: the current specification, the lot certificate, the destination rules and the change record. The COA covers the lot, the TDS states the specification, the SDS covers handling, and none of them decides the market route. The form is the first checkpoint: the base has no chloride and an alkaline solution, while the salt has 19.0–19.6% chloride and a 5% solution at pH 5.0–6.0. A file that mixes the two is inconsistent before any regulator sees it. Name the form and CAS in the specification, the COA, the label text and the quotation. ## European Union L-lysine has a long history in food, but the novel-food status of the exact form and use should still be checked against the Commission's catalogue as of this review. Directive 2002/46/EC harmonises vitamins and minerals, not amino acids, so member-state rules and mutual recognition generally decide the route. The buyer's team fixes the member-state position and checks the material as placed on the market. Labelling follows Regulation (EU) No 1169/2011: the ingredient list names the ingredient used. The free base is “L-lysine”; the salt is “L-lysine hydrochloride”. A quantitative statement should say whether the number refers to the base, the salt or the lysine entity. Claims are separate under Regulation (EC) No 1924/2006, and the current consolidated text is the reference. ## United States L-lysine is a dietary ingredient under DSHEA. Supplement Facts lists “L-lysine”; when the salt is used, the lysine entry carries “(as L-lysine hydrochloride)” and the quantity declared is lysine. Lysine has no Daily Value, so the panel shows no percentage. A structure/function statement rests on substantiation and the DSHEA disclaimer; label and claim review sit outside the COA. ## Contaminants and limits Contaminant limits are calculated for the finished product, not only measured on the drum. The table is a starting point for a supplement file; the current text for the destination and the daily dose fix the final figure. In the EU, Regulation (EU) 2023/915 sets maximum levels for lead, cadmium and mercury in food supplements; arsenic is not harmonised at EU level as of this review. Contaminant levels to check against the finished dose | Metal | Reference level | Evidence to hold | Lead (Pb) | 3.0 mg/kg in the finished supplement | Result, method and the dose calculation | Cadmium (Cd) | 1.0 mg/kg in the finished supplement | Result plus any category exception | Mercury (Hg) | 0.10 mg/kg in the finished supplement | Result and method | Arsenic (As) | Market or customer limit | Agreed limit and method, on the certificate The catalog limits are Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg. They apply to the ingredient; the finished-product calculation has to account for the dose and for the other ingredients in the formula. ## Claims and the label boundary In the EU, no authorised health claim for lysine is listed in the Register as of this review. A claim written for another amino acid does not transfer, and a disease-related claim is outside the regulation. In the US, a structure/function statement needs supporting evidence and the DSHEA disclaimer, and it cannot be a disease claim. No health claim is made here. The form is part of the claim file. A label that says “L-lysine” while the drum is the hydrochloride would declare 500 mg of lysine from 500 mg of salt, which delivers about 400 mg. A label that names the salt has to be consistent with the chloride and pH data behind it. Review the label and the specification together, not in two separate rounds. ## Documents for the free-base file The buyer should hold a COA showing the titration, the rotation and its conditions, IR identification, loss on drying, particle size, the metal panel and the micro count. Add the specification version, the TDS, the SDS, the allergen and GMO statements, the origin record, the residual-solvent statement and the novel-food status. Chloride is not routine for the base, but it is the test that separates the form when the certificate is silent. The COA should name the free base and the assay basis. An as-is figure, a dried-basis figure and a salt figure are three different numbers. The buyer owns the market route, the finished dose and the label review; the supplier owns the source, the process and the pack record. ## Checklist before the first order - The specification version, CAS 56-87-1 and the free-base name are on the sheet. - COA, TDS, SDS, allergen, GMO, origin and solvent statements sit in the folder. - Contaminant figures are recalculated for the daily dose. - Label, quantity statement and claim have been checked for the destination. - Source, process and pack changes have an owner and a record. - Quotation, specification and certificate share one version. The catalog specification is on the product hub. The other form is on the hydrochloride page. The lot certificate is explained on the COA page; the evidence is on the identity page; release is described on the quality page; the tests are in the methods library. ### 06 How we prove an L-lysine lot is the free base URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-lysine/identity/ Reviewed: 2026-11-20 A free-base L-lysine lot has to satisfy four checks at once: the paper names L-lysine and CAS 56-87-1, IR matches the reference, the rotation at c=2 in 5 M HCl is +25.0° to +27.0°, and the titration is 98.5–101.5% with loss on drying ≤0.5%. A chloride result near 19% would point to the hydrochloride. None of these lines is sufficient alone. In one lineIR identifies the amino acid, rotation identifies the L enantiomer, titration measures the content, and the absence of chloride supports the free-base form. ## Four checks, four questions Each check answers a separate question, and none of them can be skipped. A supplier who answers only the first has sent a description, not evidence. What each identity check establishes | Check | Question | Method | What it establishes | Paper trail | Is the form stated? | Name, CAS number, formula | Only what the documents say | IR | Is it the right amino acid? | Spectrum against a reference | The functional groups | Rotation | Which enantiomer is it? | Polarimetry or chiral HPLC | L or D | Mass balance | Is it cut, or salted? | Titration, water, chloride | Content and form agree ## The molecular-weight ratio and the chloride check The ratio between the forms is fixed by their formulas. The free base is 146.19 g/mol and delivers 1.00 g of lysine per gram. The hydrochloride is 182.65 g/mol and delivers 146.19 ÷ 182.65 = 0.800 g of lysine per gram; chloride makes up the other 19.41%. The ratio does not move with the assay or with the batch. Lysine and chloride in one gram of each form | Line | L-lysine free base | L-lysine hydrochloride | Molecular weight | 146.19 g/mol | 182.65 g/mol | Lysine per gram | 1.00 g | 0.800 g | Chloride per gram | None as the counter-ion | 0.194 g A lot sold as the base with chloride near 19% is the salt, or a blend containing it. A lot sold as the salt with little chloride is not the salt, however high the titration reads. A blend sits between the figures in proportion to its salt fraction. The solution pH is a supporting signal: the salt is specified at 5.0–6.0, while the base is alkaline. ## XRD and the solid state XRD looks at the crystal, not at the content. It can show whether the solid is crystalline, whether the pattern matches a reference, and whether two sources have the same solid form. It cannot measure the counter-ion or the assay, and it does not distinguish L from D. The method is useful after a new crystallisation step, a granulation, or a supplier change that might have altered the solid form. Request the reference diffractogram and the limit of detection before accepting a “match”. A clean diffractogram is supporting evidence, not a replacement for IR, rotation and titration, and a missing pattern does not prove the lot is wrong. ## Where substitutions show up Substitutions and the lines that expose them | Substitution | Why it can pass a quick check | Signal | Test | Hydrochloride | Same lysine entity; the titration still reads lysine | Chloride near 19%; pH 5–6 | Chloride; pH | D-lysine | Same formula and mass | Rotation of the wrong sign or size | Rotation; chiral HPLC | DL-lysine | Same formula and mass | Rotation near zero | Rotation; chiral HPLC | Other amino acid | Similar acid–base behaviour and mass | IR or chromatographic mismatch | IR; amino-acid profile | Diluent | Lowers the titration without a matching impurity | Assay low; water or residue may rise | Titration; mass balance | Water | The assay can be corrected to dry matter | Loss on drying high; as-is assay low | Loss on drying The salt is the most plausible substitute: it is a legitimate lysine material with a similar titration. It fails the chloride and pH checks, not the lysine check. D- and DL-lysine keep the formula and the mass and fail the rotation. Another amino acid is exposed by IR and the chromatographic profile, and a diluent by the mass balance. No single assay catches all of them. ## Writing identity into the specification - “L-lysine free base, CAS 56-87-1, C6H14N2O2, white to off-white powder.” - “Identification by IR against a reference and by titration; state the technique and the reference.” - “Assay 98.5–101.5% by titration, calculated as the free base; state the as-is or dried basis.” - “Specific rotation +25.0° to +27.0° at c=2 in 5 M HCl, with temperature and wavelength.” - “Loss on drying ≤0.5%; particle size ≥95% through 80 mesh; heavy metals and microbiology as listed.” - “No added L-lysine hydrochloride, D-lysine, other amino acids or diluent.” - “Chloride reported on request, with the method and the detection limit.” ## What to ask the supplier - What IR reference and sample preparation did you use, and can you share the spectrum? - What are the specific rotation and its conditions for this lot? - What is the assay basis, and which titration method was used? - What is the chloride result, or the detection limit if chloride was not detected? - Which lot code ties the certificate, the drum and the retention sample together? Read together, five answers make an identity file; one assay percentage does not. The catalog specification is on the product hub. The other form is on the hydrochloride page. Release figures and their certificate positions are on the COA page; the grades page sets out the form comparison; the narrow chloride and label question is on the level-four page; methods are in the methods library; the release file is described on the quality page. ### 01 What the COA for L-ornithine hydrochloride actually contains URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-ornithine-hcl/coa/ Reviewed: 2026-11-20 The certificate for an L-ornithine hydrochloride lot reports appearance, identification by IR and titration, assay by titration calculated as the salt, specific rotation in 5 M hydrochloric acid, loss on drying, the heavy-metal panel, microbiology and an 80 mesh sieve result. Two lines decide whether the numbers mean anything: the entity the assay is calculated as, and the solvent used for the rotation. The limits below are the catalog specification; the batch COA carries the measured result for the lot. In one lineThe assay is a titration figure calculated as the hydrochloride, the rotation is read in 5 M acid, and both need the loss on drying beside them to describe the same powder. ## The certificate as a test report A usable certificate is auditable. For each line the reader needs the parameter, the method and the release limit, and then a result column that carries the measurement for that lot. A row that says only "conforms" states a conclusion and withholds the evidence behind it. The form is the first question. L-Ornithine hydrochloride, CAS 3184-13-2, is a different material from the free base, CAS 70-26-8. The catalog method is titration for the assay, with IR and titration for identity and polarimetry for the L configuration. Release panel · L-ornithine hydrochloride | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | IR and titration | Conforms to the reference | Assay, as the hydrochloride | Titration | 99.0–101.0% | Specific rotation | Polarimetry, c=2, 5 M HCl | +22.0° to +24.0° | Loss on drying | Gravimetric | ≤0.5% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh ## The entity, the basis and the rotation solvent The assay is reported as the hydrochloride. The titration gives an equivalent count for the weighed powder, and the method's calculation factor converts it to a percentage of C5H13ClN2O2. If the same titration were calculated as ornithine, the figure would land near 78.4%, because that is the ornithine fraction of the salt. Both calculations can be correct and they describe different quantities, so the certificate has to say which one it used. The basis is the second half of the statement. Loss on drying is ≤0.5%, so the as-is and dried figures are close, but close is not identical: a lot at 0.4% moisture reads 99.4% as-is where it reads 99.8% on the dried basis. The assay row should print the basis rather than leave the reader to infer it. The rotation has its own condition. The catalog reads +22.0° to +24.0° at c=2 in 5 M hydrochloric acid. Strong acid protonates the amino groups, so the measured species is the ornithine cation whether the starting material was the salt or the base; the acid suppresses the ionisation difference that the counter-ion would otherwise create. The solvent, concentration and temperature therefore belong in the rotation row. ## Release limit and measured result The limit is the boundary; the result is what the laboratory found. A result column filled with the specification range is a copy of the gate, not evidence that the lot passed it. The table below sets out what belongs in that column. What the result column should contain | Parameter | Release limit | Result column | Assay | 99.0–101.0% as the hydrochloride | A measured percentage, with the entity and basis stated | Specific rotation | +22.0° to +24.0° at c=2, 5 M HCl | The measured angle and the specific rotation, with temperature | Loss on drying | ≤0.5% | A measured percentage | Heavy metals | Per element | A separate mg/kg figure for each element | Microbiology | Counts and absence | The plate count and an absence statement for the lot | Particle size | ≥95% through 80 mesh | The measured percentage through the sieve The catalog does not print a chloride line; the assay entity and the rotation already describe the salt. When the buyer needs the counter-ion on the certificate, add chloride by argentometric titration or ion chromatography and compare it with the theoretical 21.0%. A chloride result near that figure is a direct confirmation of the monohydrochloride; a result near zero says the lot is the free base. ## What moves between lots Salt formation and crystallisation move the colour and the residual water; drying moves the loss on drying; milling moves the sieve result. Those are process movements, not identity failures, provided the rotation and the assay stay in their windows. Rotation is the least forgiving line. It is set by the enantiomeric composition, so a normal lot repeats within a narrow band and an outlier points to a D-enriched or racemic source rather than to process drift. A low assay with a normal rotation suggests moisture, a dilution or a calculation error. A normal assay with a low rotation suggests the other enantiomer. Colour is a weak signal. White to off-white covers a wide range, and a slightly cream batch can still be the same salt. A batch that turns noticeably yellow or brown deserves the chromatogram and the batch record, not a rejection based on shade alone. The lot code on the certificate should match the pouch, the drum and the retained sample. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a disputed form or a rotation at the edge of the window. The useful panel is targeted: titration for assay with the calculation entity stated, polarimetry with solvent and concentration, IR for identity, loss on drying, chloride, ICP-MS for the metals and a micro count. Add chiral HPLC when the rotation is low or the source is new, and ask for the enantiomeric ratio rather than a pass statement. A rotation inside the window can still hide a small D fraction; the chromatogram shows the size of it. Ask each laboratory for its detection limit, because a "not detected" line without a limit describes the method, not the sample. The portion tested should come from the retained sample, and the report should identify the lot. When a result is contested, give the referee the retained sample, the supplier's certificate and the specification, and ask for the discriminating tests rather than a second run of the same titration. ## What to compare between suppliers Put seven lines side by side: form and CAS; assay with its entity and basis; rotation with solvent and concentration; loss on drying; chloride, if the certificate carries it; mesh and lot code; and the identity method. Two quotations that agree on the assay but disagree on the entity are not selling the same powder. The second layer is traceability: who manufactured the lot, which route was used, and which drying and milling steps were applied. The catalog specification sits on the L-ornithine HCl product page. The tests that separate the salt from the base are on the identity page; the free-base comparison is on the L-ornithine page; the IR method is described in the FTIR method note; the release workflow is on the quality page. ### 02 L-ornithine hydrochloride grades: the salt, the mesh and the fill URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-ornithine-hcl/grades/ Reviewed: 2026-11-20 L-Ornithine hydrochloride is the salt form of the amino acid: one equivalent of hydrochloride per ornithine molecule, CAS 3184-13-2, 168.62 g/mol, and a white to off-white powder. The catalog grade is 99.0–101.0% by titration and at least 95% through 80 mesh; a granulated version is available on request. The grade decision is therefore two decisions: which form, and which particle size. In one lineThe grade is two decisions, the hydrochloride rather than the free base and an 80 mesh powder or a granulation, and neither is a quality ranking. ## Why the hydrochloride is the commercial form The free base is alkaline and takes carbon dioxide from the air; the hydrochloride is the crystalline salt made by adding hydrochloric acid to the base and crystallising. The salt has a defined counter-ion, a much less alkaline solution and a form that handles well as a dry powder. Those are the reasons most capsules and blends are built on the salt rather than on the base. The salt is not a free upgrade. One hydrochloride adds 36.46 g/mol, so a gram of powder carries about 784 mg of ornithine and about 210 mg of chloride. The formula has to accept that mass and that chloride, and the label has to name the salt. The free base remains the right choice when the formula wants the alkalinity or when the chloride is not wanted. The second decision is physical. The catalog grade is an 80 mesh powder: at least 95% passes an 80 mesh sieve. That is finer than the 40 mesh free-base grade, which helps content uniformity in a capsule but makes dust and caking more visible in the filling room. A granulated grade is quoted on request and has its own particle-size line. ## The hydrochloride against the free base L-ornithine hydrochloride and L-ornithine free base | Line | Hydrochloride | Free base | Label name | L-ornithine hydrochloride | L-ornithine | CAS number | 3184-13-2 | 70-26-8 | Formula and molecular weight | C5H13ClN2O2 · 168.62 | C5H12N2O2 · 132.16 | Ornithine per gram | About 784 mg | 1,000 mg | Chloride | About 210 mg/g | None from a counter-ion | Solution pH | Acidic; the catalog states no number | 9.0–11.0 at 1% | Catalog assay | 99.0–101.0% by titration, as the salt | 98.5–101.5% by HPLC | Catalog mesh | ≥95% through 80 mesh | ≥95% through 40 mesh The pH row is qualitative for the salt on purpose. The catalog does not print a pH window for the hydrochloride, so the buyer who needs one should agree a value and a concentration in the specification rather than copy the free-base window across. The salt-versus-base page takes the chloride, the pH and the label further. ## Mesh, flow and the chloride surface An 80 mesh powder is fine enough to disperse quickly and to mix evenly into a capsule fill, and fine enough to hang in the air when a scoop is poured. In a filling room that means dust extraction, a closed transfer and a settling time before the area is cleaned. The same fineness makes the powder prone to caking once moisture reaches it, because the particles have more surface per gram. A granulation is the usual answer when flow is the problem. It builds larger particles with a binder, which reduces dust and segregation, but it adds a water step and a binder to the specification. The granulated grade does not automatically inherit the powder's stability data or its mesh line; ask for both, and keep the chemical form and the physical form as two separate lines on the purchase order. The chloride load has a handling consequence. In a dry room the powder is a normal solid; when moisture is present, chloride solutions attack mild steel. Contact parts, scoops and storage containers should be specified for chloride service, and a spill should be cleaned rather than left damp on a mild-steel surface. ## Dosage forms and the fill weight A capsule or tablet takes the 80 mesh powder directly. The fill weight is set by the label: 500 mg of the salt delivers about 392 mg of ornithine, and 500 mg of ornithine needs about 638 mg of the salt. A tablet adds granulation and compression to the question, so the granulated grade may be the better physical match even though the chemistry is unchanged. A powder blend or stick pack takes the salt because it dissolves freely, but the blend has to be checked for the acidic pH it creates and for segregation between a fine amino acid and a coarser carrier. A liquid is the most demanding format: the salt is soluble, yet the solution is acidic and an unpreserved aqueous system is a microbial risk, and the chloride raises the corrosion question on the plant side. The dosage form should be chosen with the pH and the chloride in view, not only with the assay. ## What to write into the specification - "L-ornithine hydrochloride, CAS 3184-13-2, C5H13ClN2O2; the free base is a separate purchase." - "Assay 99.0–101.0% by titration, calculated as the hydrochloride, with the basis stated." - "Identification by IR and titration; specific rotation +22.0° to +24.0° at c=2 in 5 M HCl." - "Loss on drying ≤0.5%; chloride about 21.0% where the counter-ion is to be confirmed." - "Particle size ≥95% through 80 mesh, or the granulation agreed in writing." - "Heavy metals and microbiology as listed; lot code on the pack, certificate and retained sample." ## When the free base is the better choice Choose the free base when the label names L-ornithine, when the formula needs the higher ornithine per gram, or when the chloride is not acceptable in the matrix. Choose the hydrochloride when the formula wants a less alkaline powder, when the label names the salt, or when the chloride is already part of the product. Neither choice is a potency ranking; the two materials differ in mass, pH and label name. Do not switch forms to fix a flow problem. Mesh and granulation are the tools for flow; a form change rewrites the assay, the fill weight and the panel. The catalog sheet for the salt is on the product hub; the free-base sheet is on the L-ornithine page; the COA page shows how the salt is reported; the stability page covers moisture and the pack; the particle-size note explains the mesh figure. ### 02.1 L-ornithine vs L-ornithine HCl: chloride, pH and the label URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-ornithine-hcl/grades/l-ornithine-vs-l-ornithine-hcl/ Reviewed: 2026-11-20 The hydrochloride is the free base plus one equivalent of hydrochloric acid. It is 168.62 g/mol against 132.16, carries about 78.4% ornithine and 21.0% chloride, and dissolves to an acidic solution rather than an alkaline one. The label has to name the salt, and the quantity has to say whether it refers to the salt or to the ornithine. In one lineOne hydrochloride adds 36.46 g/mol, and with it an acidic solution, 21.0% chloride and a different name and number for the label. ## One proton and one counter-ion Ornithine has a carboxyl group and two amino groups. The free base is the neutral molecule, C5H12N2O2, 132.16 g/mol. The monohydrochloride adds one HCl across the molecule: C5H13ClN2O2, 168.62 g/mol, CAS 3184-13-2. The two are separate specification items with separate CAS numbers, and a purchase order that names only "L-ornithine" has not chosen either. L-ornithine hydrochloride and L-ornithine free base | Property | Hydrochloride | Free base | CAS number | 3184-13-2 | 70-26-8 | Formula | C5H13ClN2O2 | C5H12N2O2 | Molecular weight | 168.62 | 132.16 | Ornithine per gram | About 784 mg | 1,000 mg | Chloride per gram | About 210 mg | None from a counter-ion | Solution pH | Acidic | 9.0–11.0 at 1% | Label name | L-ornithine hydrochloride | L-ornithine ## The chloride load and the label arithmetic At 21.0% chloride, the salt brings a real quantity of a nutrient that a label may have to account for. One gram of powder carries about 210 mg of chloride; 500 mg carries about 105 mg; a 1,000 mg ornithine dose, which needs about 1,276 mg of salt, carries about 268 mg of chloride. These figures are arithmetic, not a dose recommendation. If the label declares chloride, the EU reference intake is 800 mg/day in Annex XIII of Regulation (EU) No 1169/2011, as of this review. One gram of the salt is about 26% of that reference. The nutrition declaration's "salt" figure is a different calculation: it is sodium × 2.5 under Annex I of the same Regulation, and the salt contains no sodium, so its chloride does not raise the declared salt figure. That distinction matters when a panel already carries a salt line from another ingredient. In the US, the Supplement Facts panel names the dietary ingredient and its amount; a chloride line is a separate labelling decision, not something that appears because the ingredient name ends in "hydrochloride". The buyer's regulatory team records that decision with the label file. ## Why the solution turns acidic The free base solution is alkaline because the amino groups are largely unprotonated; the catalog window is 9.0–11.0 at 1%. The hydrochloride is the salt of that weak base with a strong acid. In water the ammonium group releases a proton, so the solution is acidic, and the pH moves with concentration because the equilibrium depends on how dilute the solution is. The catalog does not print a pH number for the salt, so a formulator who needs one should agree a value at a stated concentration and have it measured on the lot. The pH change is not cosmetic. An acidic ingredient can shift the pH of a drink, change the colour of a sensitive pigment, alter the gel strength of a protein system or move the taste. It can also change the rate of a reaction with a reducing sugar. The free base moves the same matrix in the opposite direction, so a formula built on one form cannot be switched to the other without rechecking the pH and the hold time. ## The conversion a formula needs The conversion factor is the ratio of molecular weights: 168.62 ÷ 132.16 = 1.276. To declare 1,000 mg of ornithine, weigh 1,276 mg of the salt. To declare 500 mg of ornithine, weigh 638 mg. In the other direction, 500 mg of the salt delivers 392 mg of ornithine, and 1,000 mg of the salt delivers 784 mg. The factor is fixed by the formula, not by the assay. The assay is a second, smaller correction: a lot at 99.5% as the salt needs slightly more powder than the theoretical conversion, and the loss on drying is a third. The steps are small for this salt because the moisture limit is 0.5%, but they should be applied in the same order and recorded. A capsule fill designed on the raw salt weight and a label written on ornithine are two different numbers. ## What the label has to say Name the form. In the EU, the ingredient is "L-ornithine hydrochloride"; the free-base name does not describe the salt, and the novel-food and member-state review runs on the exact material. In the US, the Supplement Facts panel should write the salt out rather than use "L-ornithine" as a short name for it. The panel and the certificate must name the same substance. The quantity needs a convention. A panel that says "L-ornithine hydrochloride 500 mg" declares 500 mg of the salt, which is about 392 mg of ornithine. A panel that says "L-ornithine 500 mg (as L-ornithine hydrochloride)" declares 500 mg of ornithine, which needs about 638 mg of the salt. Both conventions can be made consistent, but a bare "L-ornithine 500 mg" filled with the salt overstates the ornithine: 500 mg of the salt carries only about 392 mg, so the panel is short by about 108 mg. Write the form and the reference quantity into the artwork and the specification together. Ornithine has no EU Nutrient Reference Value and no US Daily Value, so no percentage belongs beside it. The chloride line, if the label carries one, follows the reference intake for chloride. No disease-related claim is open in either market, and the form does not create one. ## When to use which form Use the hydrochloride when the formula wants a less alkaline powder, when the label names the salt, or when the chloride is acceptable or already declared. Use the free base when the label names L-ornithine, when the formula needs the alkalinity, or when the chloride is not acceptable. The salt is not a stronger version of the base and the base is not a purer version of the salt; they are different materials with different masses. A switch in either direction needs a new specification, a new fill weight, a new label and a stability check. The hydrochloride product page carries the catalog specification; the free-base page carries the other sheet; the grades page places this comparison in the range; the methods library explains the assays; the quality page describes the release file. ### 03 L-Ornithine HCl: moisture, the pack and the shelf life URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-ornithine-hcl/stability/ Reviewed: 2026-11-20 L-Ornithine hydrochloride is a hygroscopic, acidic salt. The dry powder stores well in a sealed, moisture-barrier pack; once water reaches it, the powder cakes, the loss on drying rises and the as-is assay falls. In solution the same material meets heat, pH and microbial risk, and the shelf life has to be measured in the pack and the matrix that will be sold. In one lineMoisture is the first failure mode for the dry salt; the solution adds heat and pH, and the shelf life belongs to the pack and the matrix. ## The powder: moisture, caking and chloride The catalog loss on drying is ≤0.5%. That is a release gate, not a storage allowance: an opened pouch in a humid room will move past it. The salt is hygroscopic, so water collects at the particle surface first, the fine 80 mesh powder bridges into lumps, and the as-is assay falls even while the dried-basis figure holds. The chloride load makes the wet powder mildly corrosive. A damp spill left on mild steel, a scoop stored wet or a damaged liner is a handling and maintenance problem as well as a quality one. Keep the powder in the original foil pouch or an opaque, moisture-barrier container, keep the closure dry, and clean spills before they dry into the surface. Heat accelerates the movement of moisture but is not the primary driver in a sealed pack. A hot loading bay or a car boot is still the wrong place for a hygroscopic salt; let a cold pack equilibrate before opening so that condensation does not form on the powder. ## The solution is the exposed format The salt dissolves freely and gives an acidic solution. The pH depends on concentration because the ammonium group is a weak acid; the catalog does not print a pH number for the salt, so a formulator who needs one should agree a value and a concentration in the specification and measure it on the lot. In solution the risks are different from the powder: heat drives browning with reducing sugars, pH changes the ionisation and the taste, and an unpreserved aqueous system is a microbial risk. The chloride is still present, so a metal contact surface that was acceptable for a neutral syrup may not be acceptable here. A ready-to-drink process adds a pasteurisation or hot-fill step that the powder never sees. If a liquid is unavoidable, fix the pH, control the heat load, preserve the system and validate the hold time in the real matrix. A bulk-powder result does not transfer to a drink. ## What drives the change What moves L-ornithine hydrochloride during storage | Factor | Effect | Control | Moisture | Caking, higher loss on drying, lower as-is assay | Sealed foil pouch; dry filling room | Heat | Faster browning and degradation in solution | Cool process; validate the heat load | pH | Changes ionisation, taste and solution stability | Agree the pH; buffer or adjust the matrix | Reducing sugars | Browning with heat in a liquid or a wet blend | Choose low-sugar carriers; trial the matrix | Metal contact | Chloride corrosion; colour and metal pickup | Specify chloride-service contact surfaces | Microbiology | Growth in an unpreserved aqueous system | Preservation and process validation ## A protocol for the packed ingredient Run the study on the pack that will be sold. The standard long-term condition is 25 °C/60% relative humidity, with 30 °C/65% relative humidity for a hot, humid destination and 40 °C/75% relative humidity as the accelerated arm. Add an open-pack arm if the powder will be weighed in a humid filling room; that arm measures the pickup the closed pack is meant to prevent. Test assay, specific rotation, loss on drying, appearance, chloride if it is a specification line, and microbiology at each point. The rotation should be stable; a change in it is a signal about the molecule, not about the water. Photostability is a smaller question for this salt than for a chromophore, but a clear container is still not the right pack. Add a stressed sample of the real blend. A capsule shell, a tablet granulation and a stick pack each transfer moisture differently, and the blend can show caking or a pH shift before the powder assay moves. ## The finished formula changes the answer A capsule or tablet keeps water activity low, but the shell and the excipients can still move moisture into the fill. Check loss on drying, appearance and assay after storage, not only at release. A tablet granulation adds water and a binder; the granulated grade needs its own data. A stick pack is a small, sealed environment. The acidic salt can change the drink pH, and any moisture that reaches the powder can cake it before the consumer opens the pack. The seal and the strip are part of the stability question, not only the powder. A liquid combines pH, heat, preservation and chloride corrosion. The ingredient's bulk stability is the starting point; the shelf life of the drink has to be measured in the drink. ## How the shelf life is set We do not publish one shelf-life number for L-ornithine hydrochloride, because the pack and the storage condition set it. The assigned retest period belongs in the specification and is supported by the stability file for that pack, liner and closure. A number without those details is a claim, not a shelf life. After the retest period, re-assay the retained sample before extending use. Do not carry a bulk figure across to a repack, and do not extend on the strength of the assay alone if the powder has caked or changed colour. The product hub lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the loss-on-drying note explains the moisture test; the quality page describes the release file. ### 04 L-Ornithine HCl: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-ornithine-hcl/moq/ Reviewed: 2026-11-20 L-Ornithine hydrochloride is supplied from 1 kg: the foil pouch is the smallest pack and the 25 kg fiber drum is the bulk unit. Standard dispatch is 1–7 days from confirmation. A quotation can only be firm once it names the salt and CAS number, the assay entity, the pack, the destination, the document set and the market. In one lineA kilogram is the practical minimum: it is enough for a trial, a retained sample and an independent chloride check, and it still ships as one parcel. ## Why the minimum is 1 kg One kilogram is a working quantity, not a token sample. It covers a bench trial, a retained portion and an outside test for the salt form, and it travels as a single parcel. The two tests most often sent out are the rotation and the chloride check, and both need enough powder to be representative. Repacking below that size splits a lot from its original pack record. The chemistry does not change, but traceability does. At the other end, a 25 kg drum cuts handling per kilogram while tying up inventory for longer; the minimum is set by the pack, not by a volume incentive. A kilogram also leaves room for a referee sample if a result is challenged, which a 100 g split may not. ## Packs and formats Standard L-ornithine hydrochloride packs | Pack | Net weight | Use | What to note | Foil pouch | 1 kg | Trial or small batch | Heat-sealed moisture barrier | Fiber drum | 25 kg | Production | Inner liner protects the powder | Granulated powder | On request | Flow and dust control | New mesh and stability file | Custom mesh | On request | Match an existing fill | Sieve line changes The catalog powder passes 80 mesh at 95% or better. A granulation or another mesh is a specification change: the quotation, the certificate and the stability summary all have to carry the new line. Both packs are moisture barriers, not moisture-proof guarantees. The pouch depends on its seal and the drum on its liner, so a cut liner or a folded-over pouch is an opening. ## Lead time and dispatch Standard dispatch is 1–7 days after confirmation. The clock covers picking, documents and handover to the carrier; transit, customs and the buyer's own release sit outside it. A custom mesh or a granulation needs extra time, stated separately. Ask for a dispatch date, not just a range. The pouch goes as a parcel and the drum as a pallet; the Incoterm fixes who books and who clears. Lot papers should be in the same shipment as the powder. A pre-shipment sample can be drawn from the lot before dispatch; ask for the draw date and the lot code together. ## What a quotation needs Six details turn an enquiry into a quotation that can be compared: - The salt. L-ornithine hydrochloride, CAS 3184-13-2. - The specification. Assay entity and basis, rotation conditions, loss on drying, mesh, metals and micro. - The pack. Pouch, drum, granulation or custom mesh. - The destination and Incoterm. Country, port or address, trade term. - The document set. COA, specification, SDS and any market statement the importer needs. - The use and market. Supplement, food or another use, and where it will be sold. Missing either the destination or the assay entity leaves the offer ambiguous. The powder may be right for one label and wrong for another, and the document set is part of what is being bought. Prices and terms are on the quotation. ## A sample needs a lot code The 1 kg pouch is the qualification lot. Run assay, rotation, loss on drying, chloride and micro before scaling, and retain a portion from that same pack. Sample, COA and quotation should carry one lot code; without it the sample is only a demonstration. Anything smaller is a repack from a bulk lot. It gets its own handling record and cannot stand in for the catalog pouch. Record the split in the batch file and keep that code beside the trial results. ## Terms to settle before the first order The quotation and the quality agreement should travel together: Incoterm, pack, dispatch, specification revision, lot COA, retained sample, retest period and change route. Agree them before the first production order. If a lot fails the specification, the retained sample and a joint test against the named method settle it; a photograph of the drum does not. Name the referee laboratory and who pays before a dispute, not during one. Any change to the source, mesh or granulation should trigger a new specification revision and a fresh COA, not a note on the old one. The catalog sheet is on the product hub; the release tests are on the COA page; the market file is on the compliance page; the MOQ glossary entry defines the term; the quality page describes release. ### 05 The regulatory file for L-ornithine hydrochloride URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-ornithine-hcl/compliance/ Reviewed: 2026-11-20 L-Ornithine hydrochloride is a food ingredient whose regulatory file depends on the destination and the finished product, not only on the certificate. The file has to name the exact form, CAS 3184-13-2, connect it to a route, convert the contaminant limits to the daily dose, and match the label to the salt. The buyer's regulatory team confirms the route; this page lists the documents and checks that belong in the folder. In one lineThe certificate describes the lot; the regulatory file has to connect the hydrochloride, the destination and the label, and the buyer's team signs that route. ## The file, not the certificate A supplier can hand over a COA, a specification and a safety data sheet without answering the market question. The file has to connect those documents to an instrument, a destination and a finished-product dose. The form is the first line of that connection: a document written for L-ornithine free base (CAS 70-26-8) does not describe the hydrochloride (CAS 3184-13-2), and the reverse is also true. Instruments that decide an L-ornithine hydrochloride file | Market | Instruments | What they decide | European Union | Directive 2002/46/EC; Regulations 178/2002, 2015/2283, 2023/915, 1169/2011 and 1924/2006 | Supplement status, novel-food history, contaminants, labelling and claims | United States | FD&C Act section 201(ff) as amended by DSHEA; 21 CFR 111, 101.36, 101.93 and 190.6 | Dietary-ingredient basis, cGMP, Supplement Facts and structure/function statements | United Kingdom | Retained food law, including the 2003 supplement rules and the 2014 food information rules | Sale and labelling in Great Britain; Northern Ireland uses the EU regime The certificate is a lot document, not an authorisation. The specification describes the material, the SDS describes handling, and neither speaks for the destination. Keep a versioned document list at the front of the folder. ## European Union Directive 2002/46/EC harmonises the vitamins and minerals permitted in food supplements; ornithine is not in Annexes I or II, so the member state where the product is sold decides whether a maximum level, a notification or a form restriction applies. The same capsule can be routine in one member state and need a filing in another, and the hydrochloride is a separate material from the free base for that review. Novel food is a separate gate. Regulation (EU) 2015/2283 turns on documented use before 15 May 1997, and the file needs the evidence behind that claim for the exact form, not a conclusion carried over from another salt. Labelling follows Regulation (EU) No 1169/2011 and the supplement particulars; contaminants fall under Regulation (EU) 2023/915. The current consolidated texts are the reference, and the EU regulatory notes collect the framework. ## United States In the US, section 201(ff) of the FD&C Act allows an amino acid to be sold as a dietary ingredient. The lawful basis is either marketing before 15 October 1994 or a new dietary ingredient notification under 21 CFR 190.6; the supplier should name the basis it relies on, and the buyer checks that it covers the salt and the finished product. Identity testing of each component is the manufacturer's duty under 21 CFR 111. The Supplement Facts panel follows 21 CFR 101.36 and declares the amount per serving; ornithine has no Daily Value, so no percentage appears beside it. A structure or function statement needs substantiation and the disclaimer in 21 CFR 101.93, and it must stop short of a disease-related claim. The FDA does not clear a label before sale, so the substantiation file is the brand's defence. ## Contaminants and the finished dose The catalog limits are specification terms; the regulatory question is the exposure from the finished product. The table below pairs the catalog limit with the calculation the file should show. Catalog limits and the finished-product calculation | Element | Catalog limit | What the file should show | Lead (Pb) | ≤3 mg/kg | Lot result, method and the daily-dose calculation | Cadmium (Cd) | ≤1 mg/kg | Lot result and any category exception | Mercury (Hg) | ≤0.1 mg/kg | Lot result and method | Arsenic (As) | ≤2 mg/kg | The agreed limit and the method A powder that meets the catalog can still fail the finished product, because the daily dose and the other ingredients add to the exposure. Convert each result to the daily dose, keep the margin, and record the calculation in the file. In the US, as of this review, no federal lead ceiling applies to supplements; state rules such as Proposition 65 work from the daily dose and have to be checked separately. ## Claims and the form In the EU and the UK, Regulation (EC) No 1924/2006 governs health claims, and a wording must be in the register before it is used. As of this review the register has no authorised claim for L-ornithine; the 2011 EFSA opinion on the urea-cycle claim did not establish the relationship. The current register is the reference, not this summary, and the salt form does not create a claim that the free base lacks. The US allows a structure or function statement with the DSHEA disclaimer, provided the brand holds substantiation. A compositional statement such as "L-ornithine hydrochloride 500 mg per capsule" is a different thing: it describes the product and has to match the certificate, but it does not authorise a health claim. No disease-related claim is open in either market, and this site publishes the specification only. ## Documents for the file - A lot COA with the titration assay calculated as the hydrochloride, the basis, the rotation conditions and the mesh result; the lot code must match the pack. - The current specification, naming L-ornithine hydrochloride, CAS 3184-13-2 and the particle size. - A safety data sheet, an allergen statement and a food-contact declaration for the pouch or liner. - A manufacturer and country-of-origin statement that names the production site. - Novel-food evidence for the exact form, and a US statement of the dietary-ingredient basis. - A chloride result where the form is to be confirmed analytically, and a stability summary for the pack sold. - Halal or kosher certificates where the market requires them, and a residual-solvent statement if the route uses one. ## Checklist before the first order - Name the destination, and for the EU the member state. - Confirm the specification and the label both say hydrochloride, not the free base. - Find the destination's level, notification and novel-food position for the exact form. - Convert each contaminant limit to the finished daily dose and record the margin. - Check the declared quantity against the assay entity and the salt-to-ornithine conversion. - Search the current claims register, or review the US substantiation file. - Keep one version across the specification, the certificate and the artwork. The product hub carries the catalog specification; the COA page shows the lot certificate; the identity page covers the analytical evidence; the US regulatory page and the quality page complete the folder. ### 06 How we prove a lot is L-ornithine hydrochloride URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-ornithine-hcl/identity/ Reviewed: 2026-11-20 A lot is L-ornithine hydrochloride when five lines agree: the document names the salt and CAS 3184-13-2, IR and titration identify the amino acid, the specific rotation in 5 M hydrochloric acid fixes the L form, chloride sits near 21.0%, and the assay and loss on drying close the mass balance. The assay alone cannot separate the salt from the free base or a racemate. In one lineIdentity is a set of agreeing measurements: IR and titration name the salt, rotation fixes the L form, and chloride near 21% proves the counter-ion. ## The identity layers Paperwork is the weakest layer: printing the right CAS number costs nothing and says nothing about the drum. The table separates the five questions an identity file has to answer, and each needs its own measurement. Five layers of L-ornithine hydrochloride identity | Layer | Question | Test | What it proves | Document | Does the certificate name the salt? | Name, CAS number, formula | The label on the paper | Spectroscopy | Is the skeleton ornithine? | IR plus titration | The amino acid and its acid–base behaviour | Configuration | Is the natural enantiomer present? | Specific rotation; chiral HPLC if disputed | The L form | Counter-ion | Which salt is it? | Chloride by titration or ion chromatography | The monohydrochloride | Mass balance | Is the powder diluted? | Assay, loss on drying, related substances | Whether the figures agree ## The chloride ratio: proving the salt The monohydrochloride carries one chloride for each ornithine molecule. The theoretical figures are 35.45 ÷ 168.62 = 21.02% chloride and 132.16 ÷ 168.62 = 78.39% ornithine. A lot with chloride near 21.0% and an assay near 100% calculated as the salt fits that structure. Chloride near zero means the free base or a heavy dilution; a figure well above 21% means a more heavily hydrochlorinated salt, an added chloride or a blend. Argentometric titration and ion chromatography both measure the counter-ion. The catalog does not include a chloride line, so the test is extra: use it for a disputed form, a new source, or a label that names the salt while the certificate stays vague. Solution pH supports the result, because the salt solution is acidic and a free-base solution is alkaline. A blend is the case the ratio catches. Salt and free base can be mixed to sit inside the assay window, yet the chloride result falls below 21.0% in step with the free-base fraction. The assay counts ornithine; the chloride counts the counter-ion. ## X-ray diffraction and the solid form Diffraction asks how the solid is packed, not how much ornithine is present. It can tell a crystalline salt from an amorphous carrier and it can compare a lot with a reference pattern. The hydrochloride and the free base do not share a pattern, so a match carries some information about the form. It is not a purity assay and it cannot identify the counter-ion. Before accepting a "match", ask for the reference pattern and the detection limit. A different polymorph leaves the label unchanged but may alter flow, dissolution or capsule fill; read that as a process question. Diffraction is not a routine release test here, and a certificate that says only "XRD conforms" without the pattern adds little. ## What substitution looks like Substitutions seen with L-ornithine hydrochloride and what they move | Substitute | What changes | Signal | Test | Free base | No counter-ion; alkaline solution; more ornithine per gram | Chloride near zero; pH high | Chloride, pH, assay entity | D- or DL-ornithine | The L fraction falls | Rotation low or near zero | Polarimetry, chiral HPLC | Another amino acid | Different mass and retention | IR or titration differs; extra peak | IR, HPLC, titration | Dilution | Assay and chloride both fall | The two figures move down together | Assay, chloride, mass balance | Extra hydrochloride | More chloride per gram | Chloride above 21.0% | Chloride, titration | Moisture | Water rather than ornithine | Loss on drying high; dried-basis assay normal | Loss on drying Shade is the weakest clue; the salt and the base are both white to off-white, and a diluted lot can match either. The rotation, the chloride figure and the mass balance carry the case. ## What to write into the specification - "L-ornithine hydrochloride only; CAS 3184-13-2; C5H13ClN2O2." - "Assay by titration 99.0–101.0%, calculated as the salt, with the basis stated." - "IR and titration for identity; rotation +22.0° to +24.0° at c=2 in 5 M HCl." - "Chloride about 21.0% by titration or ion chromatography when the form is questioned." - "Loss on drying ≤0.5%; ≥95% through 80 mesh." - "No D-ornithine or other amino acid above the agreed limit." - "Metals, microbiology and destination market confirmed before the order." ## Five questions for the supplier - Which form is in this drum, and does the certificate carry CAS 3184-13-2? - Is the assay expressed as the salt or as ornithine, and on which basis? - Which solvent and concentration were used for the rotation? - What chloride figure did the lot give, and by what method? - Will you re-test the retained sample jointly if the result is contested? Those five answers make a file; one assay percentage does not. The catalog sheet sits on the product hub; the COA page shows where each figure sits; the grades page compares forms; the salt-versus-base page follows the label consequence; the FTIR note explains the spectrum; the quality page describes release. ### 01 What the L-theanine COA reports, line by line URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-theanine/coa/ Reviewed: 2026-11-20 An L-theanine certificate reports appearance, identity by HPLC retention and infrared spectrum, assay by HPLC at 98.0–101.0%, specific rotation at +7.5° to +9.0°, loss on drying at ≤0.5%, the heavy-metal panel, microbiology and particle size. The assay and the rotation answer different questions: the first measures how much theanine is present, the second confirms that it is the L-enantiomer. The limits below are the catalog specification; the batch certificate is the record for one particular pack. In one lineThe assay measures the amount of theanine; the specific rotation measures which enantiomer it is, and a certificate needs both. ## The certificate, row by row A certificate earns its place when each row states the parameter, the method and the release limit, and leaves a separate column for the measured result. For L-theanine the two rows that decide identity are the chromatographic identification and the specific rotation. A certificate that reports only an assay percentage has measured the quantity and left the enantiomer untested. The infrared spectrum and the HPLC retention time identify the molecule; the rotation identifies the enantiomer; the assay measures the content. Those are three questions, and one number cannot answer all three. Identity, assay and purity limits · L-theanine | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | HPLC retention and infrared spectrum | Both conform to the reference | Assay | HPLC | 98.0–101.0% | Specific rotation | Polarimetry, c=2 in water | +7.5° to +9.0° | Loss on drying | Gravimetric | ≤0.5% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh ## Assay basis, the rotation and the L/D question The assay needs a basis. The laboratory measures the powder as received; the result is then expressed either as-is or on the dried basis. The specification should say which, and the loss on drying should sit beside the assay as a measured figure. The arithmetic is small but not zero: a lot at 99.0% as-is with 0.5% loss on drying is 99.5% on the dried basis (99.0 ÷ 0.995). A result and a limit stated on different bases are not directly comparable. Specific rotation is concentration-normalised, so it does not fall when the sample is cut with a non-optical carrier. A low rotation means the D-enantiomer or another optically active impurity is present, not that the powder is weak. The catalog window is +7.5° to +9.0° at c=2 in water; a value inside it is consistent with the L form, and a value outside it is a reason to ask for chiral HPLC rather than to repeat the polarimeter. Chiral HPLC is not on the catalog specification, but it is the quantitative enantiomer test. Ask for the L and D area percentages when the label, the market file or a previous lot makes enantiomer purity part of the agreement. The rotation and the chiral result should agree; if they do not, the sample preparation or the concentration is the first thing to check. ## The limit and the measured result A release limit is the boundary; the batch result is the measurement. They need separate columns, and the method has to be named beside them. When the result column simply repeats the specification range, the reader has been given the boundary twice and the measurement not at all. What the result column should contain | Parameter | Release limit | Result column | Assay | 98.0–101.0% | A measured percentage, with the basis stated | Specific rotation | +7.5° to +9.0° | The measured angle, the concentration and the solvent | Loss on drying | ≤0.5% | A measured percentage | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot | Particle size | ≥95% through 80 mesh | The measured percentage through the sieve Read the identity row the same way. “Conforms” is the reviewer's conclusion; the spectrum and the retention time are what the conclusion rests on. A certificate that shows a retention time but no spectrum has tested one dimension of identity and left the other to trust. ## Lot-to-lot variation The source route sets the impurity fingerprint. A tea-derived lot starts from an extract that also contains caffeine and polyphenols, so the purification record and the caffeine question belong with the certificate. A fermentation or enzymatic lot starts from a broth, so residual media, related amino acids and the enantiomer ratio are the lines to watch. The assay can pass in both cases while the trace profile differs. Drying moves the loss on drying and the as-is assay. Milling moves the particle-size result: 80 mesh is a finishing specification and can change when the mill or the sieve changes, without any change in the chemistry. Colour is a weak signal, because white to off-white covers a wide window, but a batch that is noticeably darker or duller is worth a question. The rotation should be stable across lots of the same enantiomer grade. A drift towards the low end of the window is the one variation that points at identity rather than at finishing, and it should be investigated with chiral HPLC before the lot is released against a label that names the L form. ## When an outside test earns its place Order an independent test for a new source, a first shipment into a regulated market, a disputed rotation, or a label that depends on the enantiomer. The useful panel is not a full repeat of the certificate: HPLC assay with the chromatogram, infrared spectrum, specific rotation, chiral HPLC for the L/D ratio, loss on drying, ICP-MS for the metals and the microbiology set. Add a caffeine screen when the lot is tea-derived and the specification does not already limit it. Make the laboratory state its detection limit for every screen. Without that figure, a “not detected” entry says more about the method than about the powder. Chain of custody matters as well: the sample tested should be the retained sample, and the report should carry the lot code that appears on the pouch or drum. ## Comparing two offers Put seven lines side by side: name and CAS number; source route; assay result and basis; specific rotation with concentration and solvent; chiral HPLC result if available; loss on drying and particle size; heavy metals, microbiology and documents. An offer that matches on assay but differs on rotation or source route describes a different powder. Traceability is the second layer: the manufacturer, the route, the drying and milling steps, and the revision of the specification under which the lot was made. The product hub carries the catalog specification; the identity page sets out the evidence behind the rotation; the grades page covers the source route; the HPLC method note describes the separation, and the quality page describes the release workflow. ### 02 Which L-theanine grade: source route, enantiomer and mesh URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-theanine/grades/ Reviewed: 2026-11-20 L-theanine has no salt, chelate or ester in the catalog: every grade is the same molecule, C7H14N2O3, CAS 3081-61-6. What changes between grades is the source route (tea-derived or fermentation), the enantiomer purity (L against D or DL), the assay envelope and the particle size. Those four lines decide the certificate, the label and, in the EU, the regulatory file, so the grade is a specification decision rather than a packing choice. In one lineL-theanine has no salt to choose; the grade is the source route, the enantiomer purity, the assay envelope and the particle size. ## Why there is no salt to choose The label names the molecule, not a carrier. There is no theanine oxide, citrate or chelate to choose between, and no ratio between an active and a mineral to declare. The commercial product is the L-enantiomer, and every grade in the catalog is that same molecule at the same CAS number. That removes one decision and puts weight on three. The source route decides whether the material is extracted from tea leaves or produced by fermentation or enzymatic synthesis; the molecule is identical, but the impurity fingerprint, the traceability record and the EU regulatory position are not. The enantiomer purity decides whether the powder is the L form or a mixture with the D form, which the rotation and chiral HPLC can show. The particle size decides how the powder flows, dusts and dissolves. A grade is therefore a bundle of those three choices plus the assay envelope. Two suppliers can both sell “L-theanine 99%” and still be offering different documents, different trace profiles and different market files. ## The catalog grade and the lines that move Grade lines for L-theanine, and what to re-check on a different grade | Line | Catalog grade | What to re-check on another grade | Source route | Tea-derived or fermentation | Is the route declared, and which carry-overs are limited? | Enantiomer | L-theanine | Is a D-theanine limit agreed, and is chiral HPLC reported? | Assay | 98.0–101.0% by HPLC | Is the basis stated, as-is or dried? | Specific rotation | +7.5° to +9.0° (c=2, water) | Are the concentration and solvent on the certificate? | Loss on drying | ≤0.5% | Is the limit wider, and does the pack control it? | Particle size | ≥95% through 80 mesh | Which cut, and was it measured on the lot? | Carry-over profile | Caffeine and polyphenols for tea; media and related amino acids for fermentation | Which screen appears on the certificate? | Regulatory file | Route-dependent in the EU | Does the file match the route and the destination? Read the table as a checklist for a material that is not the catalog grade, not as a second specification. A wider assay can suit a technical application and still fail a label that declares 98.0%; a tea-derived lot without a caffeine screen is not the same offer as a fermentation lot without a media screen. The use decides which grade is acceptable. ## Mesh, flow and caking The catalog form is an 80 mesh powder, meaning at least 95% passes a sieve with 80 openings per inch, roughly 180 µm. That is a fine powder: it dissolves quickly and disperses well in a stick pack, and it also dusts, carries static and cakes when it picks up moisture. The material is hygroscopic, so the sieve figure and the moisture limit belong together. A granule is built from the same powder by agglomeration, so the chemistry does not change, but the flow, the dust and the wetting rate do. That makes it a new particle-size specification, not a packing variant. A press that struggles with the 80 mesh powder may run cleanly on the granule, which still has to meet the same assay, rotation and moisture limits. Colour is a weak grade marker. White to off-white covers both the tea-derived and the fermentation material, and a slightly cream tone is not by itself a route indicator. ## Matching the grade to the dosage form A capsule or tablet takes the powder at its declared fill weight; the 80 mesh material flows well enough for many fills, and a granule is the answer when the press or the hopper needs it. The fill weight is fixed by the capsule size and the bulk density, so the declared dose and the particle form are linked decisions, not independent ones. A stick pack or drink mix takes the fine powder because it dissolves readily; the solution is clear and slightly sweet, which is useful in a flavoured format. The same hygroscopicity that makes the powder dissolve quickly makes an open stick line a moisture risk, so the seal and the in-process hold belong in the specification. One label distinction matters more than the mesh. A tea-derived L-theanine is an isolated ingredient, not the same as a green tea extract: the extract is standardised on tea polyphenols or caffeine, while the isolated material is standardised on theanine. If the label names a tea extract, an L-theanine certificate does not support that claim, and the reverse is also true. The comparison with GABA makes the same point about a second ingredient in the same category. ## Specification lines for the grade - “L-theanine, CAS 3081-61-6, C7H14N2O3, with the source route declared.” - “Assay 98.0–101.0% by HPLC, with the basis stated.” - “Specific rotation +7.5° to +9.0° (c=2, water); chiral HPLC L/D result where the enantiomer is part of the agreement.” - “Loss on drying ≤0.5%; particle size ≥95% through 80 mesh.” - “Heavy metals and microbiology as listed; a caffeine screen for a tea-derived lot.” - “Destination market and source route checked against the regulatory file before the order.” We supply the L-enantiomer; the source route is declared on the quotation and fixed in the specification. A change of route is a new specification and, in the EU, potentially a new regulatory file, so it should not be treated as a supply detail. The product hub carries the catalog specification; the COA page shows how the assay and rotation are reported; the compliance page covers the market file; the HPLC method note describes the separation; the quality page describes the release workflow. ### 02.1 L-theanine vs GABA: two molecules, two labels URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-theanine/grades/l-theanine-vs-gaba/ Reviewed: 2026-11-20 L-theanine (C7H14N2O3, CAS 3081-61-6) and GABA (C4H9NO2, CAS 56-12-2) are different molecules with different molecular weights, different certificate lines and different label names. L-theanine is chiral and needs a rotation or a chiral HPLC result; GABA is achiral, so a rotation says nothing about it. They are often sold in the same relaxation category, but there is no conversion factor and no substitution route between them. In one lineL-theanine and GABA are two different molecules with two different labels and two different certificates; neither is a substitute for the other. ## Two molecules, two identities The names sit next to each other on a supplement shelf, and that is where the similarity ends. The two materials have different formulas, different molecular weights and different functional groups: L-theanine is a γ-glutamyl amide of ethylamine, while GABA is a four-carbon amino acid. Neither is an isomer of the other, and neither can be converted into the other by adjusting a weigh-up. L-theanine and GABA side by side | Property | L-theanine | GABA | Common name | L-theanine | GABA | Chemical name | N-ethyl-L-glutamine | γ-aminobutyric acid | Formula | C7H14N2O3 | C4H9NO2 | CAS number | 3081-61-6 | 56-12-2 | Molecular weight | 174.20 | 103.12 | Chirality | One chiral centre; the L form is the product | Achiral; no L or D form | Appearance | White to off-white powder | White crystalline powder | Label name | L-theanine | Gamma-aminobutyric acid (GABA) That chirality row is the practical divide. It gives L-theanine a specific rotation and a chiral HPLC test, and it gives GABA neither. A specification written for one material cannot be copied onto the other and expected to release it. ## The label has to name both, precisely “Theanine” without the L is incomplete. The ingredient is L-theanine; D-theanine and DL-theanine are different materials, and a label that does not name the enantiomer has left the identity open. The abbreviation “GABA” is widely used, but the full name gamma-aminobutyric acid is the ingredient name, and the market's format decides how the two appear together. A blend name does not replace the ingredient list. “Relaxation blend” or “calm complex” can be a marketing heading, but each active and its quantity still have to be declared in the form the destination requires. A label that writes “GABA (as L-theanine)” is wrong twice: the two are different ingredients, and one is not a source of the other. The same error in reverse is just as serious. For the label reviewer, the test is simple: can each declared name be matched to its own specification, certificate and quantity? If one certificate is being used to support two declared ingredients, the file has a gap. ## The arithmetic has no shared factor Each ingredient is weighed on its own molecular weight and declared on its own line. There is no conversion factor between them: 200 mg of L-theanine is 1.148 mmol, while 200 mg of GABA is 1.939 mmol (200 ÷ 174.20 and 200 ÷ 103.12). Those figures are arithmetic, not a dose recommendation. The point is that equal milligrams are not equal molar amounts, and neither figure can be derived from the other. Fill weight is the second constraint. A capsule holds a fixed volume; two actives at their declared doses, plus excipients and any flow aid, have to fit. A label that declares 100 mg of each needs 200 mg of actives before the first excipient, and a smaller capsule may not accommodate the blend. The formulator chooses the doses and the dosage form; the supplier cannot swap one active for the other to make the fill work. ## Two certificate lines, not one L-theanine is released on assay by HPLC, identity by HPLC retention and infrared spectrum, and specific rotation; chiral HPLC is the quantitative enantiomer test when the agreement calls for it. GABA is released on assay by HPLC and identity by infrared spectrum and retention, with no rotation line, because the molecule has no chiral centre. The two methods may share an HPLC platform, but the sample preparation, the standard and the identity evidence are different. A certificate for L-theanine says nothing about the GABA content of a blend, and a GABA certificate says nothing about theanine. A blend needs an assay for each active, or a validated method that separates both peaks, plus the identity evidence for each. A single “total amino acids” figure is not an assay for either ingredient. ## Two files, not one In the EU, the two ingredients do not share a route. L-theanine's position depends on the source route: tea-derived material has a history of use in tea, while fermentation-derived or synthesised material has been treated as a novel food, and an application for isolated L-theanine has been under assessment. GABA has its own novel-food history and its own assessment. As of this review, the buyer's regulatory team checks the current novel-food catalogue, any authorisation and its specification, and the claims register for each ingredient separately. A file that covers one does not cover the other. In the US, both are sold as dietary ingredients, and each needs its own basis for the intended use. Structure/function language needs substantiation and the DSHEA disclaimer, and no disease claim is open for either. A GRAS basis for a food use is ingredient-specific and use-specific, so it does not transfer from one to the other. The L-theanine compliance page sets out the documents for that file; the GABA compliance page does the same for GABA. ## When the brief calls for one or the other Start from the label and the finished product, not from the list of powders. If the label names L-theanine, the specification is L-theanine, the certificate needs the rotation and the assay, and the source route is part of the file. If the label names GABA, the specification is GABA and the identity evidence is the spectrum and the retention, with no rotation. If the brief is a blend, both certificates and a blend assay are needed. A substitution in either direction is a change of ingredient: it needs a new specification, a new label, a new stability check and a new look at the market file. It is not a unit conversion at the balance. The L-theanine hub and the GABA hub carry the two catalog specifications; the L-theanine grades page covers the source route and the enantiomer; the methods library describes the HPLC and rotation tests; the quality page describes the release file. ### 03 L-theanine stability: the dry powder, the solution and the pack URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-theanine/stability/ Reviewed: 2026-11-20 The solid is the easier format to store: dry, sealed and away from strong heat, L-theanine is followed through its assay and rotation in the stability study for the pack. The solution is the weaker format, because the amide bond can hydrolyse under strong acid or prolonged heat, and the enantiomer ratio is worth re-checking after a harsh process. Moisture is the everyday risk: the powder is hygroscopic, and caking is the first visible sign. In one lineThe dry, sealed powder is the easier format; moisture and a hot, extreme-pH solution are what move the assay and the rotation. ## The powder: moisture and caking Loss on drying is limited to 0.5% at release, a narrow window that describes the lot at the factory rather than the powder after a week on a bench. An opened pouch exchanges moisture with the room, the as-is assay drops as the water content rises, and the fine powder starts to cake. With that little headroom, the closure and the store humidity matter as much as the release result. At 80 mesh the powder is both fine and hygroscopic: it dusts, holds a static charge and pulls moisture from humid air. Store it in the original pouch or a dry container that closes tightly, and bring a cold pack up to room temperature before opening it so that water does not condense on the powder. A desiccant is useful in a damp room but cannot replace a proper closure. Colour is a slow indicator. White to off-white is the catalog window, and a cream tone is not automatically a failure; a darker or uneven colour after storage is a reason to check the loss on drying and the assay together. The powder should not be left in an open tray on a bench between weighing steps. ## The solution: clear, sweet and not indefinitely stable L-theanine dissolves readily in water to a clear solution with a slightly sweet taste, which is one reason it suits sticks and drink mixes. The same chemistry that makes the amide bond useful is the weak point in solution: under strong acid or prolonged heat, the γ-glutamyl amide can hydrolyse to glutamic acid and ethylamine. A short pasteurisation is not the same stress as acid hydrolysis, but the process has to be validated rather than assumed. Amino acids can also racemise under strong heat and alkali. Theanine is no exception, so a process with a high pH and a long heat load is a reason to measure the specific rotation again after the hold. The catalog window is +7.5° to +9.0°; a shift towards the low end is the signal to run chiral HPLC. A flavoured mix adds a second route. The amino group can react with a reducing sugar under heat and produce browning, so a stick pack with a glucose syrup or a reactive flavour is a different stability question from the plain powder. The matrix, the water activity and the process each change the rate. ## What drives change during storage Factors that move L-theanine during storage | Factor | What it does | Control | Moisture | Raises loss on drying; caking; lowers the as-is assay | Sealed pouch; dry store; desiccant where needed | Heat | Accelerates hydrolysis and browning in a matrix | Controlled store; validate the process heat load | pH | Extreme pH drives amide hydrolysis | Keep the matrix near neutral; validate the hold | Reducing sugars | Browning with the amino group under heat | Check the flavour and carrier; lower the water activity | Metal ions | Can catalyse colour reactions in a flavoured matrix | Avoid iron and copper contact | Pack integrity | A pinhole or a folded-over pouch lets moisture in | Heat-seal; inspect the strip; reseal properly The routes reinforce each other: a warm, damp store is worse than either condition on its own, and a hot, high-pH drink puts two of them together. The answer has to be tied to a pack, a condition and a time, not stated for the ingredient in general. ## Designing the stability study The protocol fixes four things: the pack, the condition, the time points and the test panel. Warehouse behaviour is covered by 25 °C/60% relative humidity and 30 °C/65%, while 40 °C/75% is the stress condition. A separate solution arm, run at the process pH and heat load for the intended hold, covers what the powder data cannot. At every point, measure assay, rotation or chiral purity, loss on drying, appearance, related substances and micro. For a stick or a drink, repeat the panel in the matrix and add seal integrity and colour. The report should give the numbers point by point and name the pack and lot family. Request the data for the exact pack on the order. Headspace and opening history differ between a pouch and a drum, and a repacked container inherits neither the original seal nor the original study. ## The finished format is a new study A capsule or tablet starts with a low water activity, but the shell and the excipients can still move moisture into the fill. The hygroscopic powder may cake in the capsule, and the loss on drying is checked at release and again after storage. A tablet also needs a granule or a flow aid that survives the press, which is a particle-size decision as much as a stability one. In a stick, the seal is the first thing to fail: one pinhole in the laminate is enough, so the strip is checked as well as the fill. A drink adds pH, heat and holding time, and the theanine sits in solution where hydrolysis and racemisation can occur. None of these formats borrows the bulk pouch's shelf life. ## Where the retest period comes from There is no single shelf-life figure for the ingredient in isolation: the pack and the storage condition decide it. The retest period is written on the specification and backed by the study for that pack. A figure quoted without a pack, a condition and a test panel is a claim rather than a shelf life. At the end of the retest period, assay the retained sample again before extending use, and repeat the rotation if the lot has been through a process. A bulk figure does not travel to a repacked container. The product hub shows the packs, the COA page the release tests and the MOQ page the order details; the methods library covers the assay and rotation, and the quality page the release workflow. ### 04 L-theanine MOQ: 1 kg, packaging and the order file URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-theanine/moq/ Reviewed: 2026-11-20 The MOQ for L-theanine is 1 kg, supplied as a 1 kg foil pouch, with a 25 kg fiber drum as the bulk pack and a 1–7 day lead time for the standard material. A firm quotation needs the source route, the assay basis, the enantiomer specification, the pack, the destination and the intended market. What ships is a traced lot with its own certificate, supplied in a pack sized for a first trial. In one lineThe 1 kg pouch is the smallest unit that keeps the sample, the certificate and the production material on one lot code. ## What one kilogram covers One kilogram covers the three jobs a first order usually has: a bench trial, a retained sample and an outside test. For L-theanine the outside test often includes polarimetry or chiral HPLC, and both need enough material to run a duplicate. The pouch also moves as a parcel, which lets a formulator start before the production plan is signed. A smaller amount is normally split from a larger lot and repacked, which adds a handling step and breaks the link between the pack and the original lot without improving the material. At the other end, the 25 kg drum lowers the handling per kilogram but ties up inventory and storage time. The minimum is set by the smallest pack that stays traceable, not by a volume discount. ## Pack sizes and formats Standard L-theanine packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Different particle-size specification The standard material is milled to pass 80 mesh at 95% or better. A granule is a separate specification and cannot be handled as an alternative fill of the same product. If the press or the stick line needs a coarser particle, raise it before the quote, since the sieve change affects the specification line and possibly the schedule. The powder is hygroscopic, so the pack is part of the specification. A pouch that has been opened and folded over is not resealed in the same sense as a heat-sealed pack. For a long storage period, transfer the remainder to a smaller dry container or use it within the stated in-use period. ## From order to dispatch For the standard pack, the quoted window is 1–7 days after the order is confirmed. Picking, paperwork and handover to the carrier happen inside that window; transit, customs and the buyer's own release happen outside it. A granulated or non-standard pack needs its own estimate, which the quotation should show as a separate line. Get a dispatch date rather than only a range. The pouch normally ships as a parcel and the drum as a pallet, and the Incoterm decides who books the freight and who clears import. The lot documents should be issued with the goods, not sent after them. ## What the quotation must state Six items make a quotation firm enough to compare: - Product and enantiomer. L-theanine, CAS 3081-61-6, with the L form and the source route written out. - Specification. Assay and basis, specific rotation, chiral HPLC result where agreed, loss on drying, particle size, heavy metals and microbiology. - Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated variant. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, specification, SDS, and any market-specific statement the importer needs. - Intended use and market. Supplement, food or another use, and the market where it will be sold. A quotation without the source route and the enantiomer is incomplete. The same assay can come from a tea-derived lot or a fermentation lot, and in the EU those routes do not lead to the same regulatory file. The commercial terms are stated on the quotation, not on this page. ## The sample carries a lot code The 1 kg pack is the qualification sample. Test identity, assay, specific rotation, loss on drying and microbiology before scaling, and keep a retained sample from the same pack. If the enantiomer is part of the label, add chiral HPLC. The lot code on the sample, the COA and the quotation should match. If the trial needs only a few hundred grams, that material is a split from a bulk lot and not the catalog pouch. It carries a handling record of its own and should not be described as the 1 kg pack. Request the split in writing and file its lot code with the trial data. The bench sample and the production drum can come from different lots even when the certificate reads the same. ## What the quality agreement should cover Set out the trade term, the pack, the dispatch window, the revision of the specification, one certificate per lot, the retained sample, the retest period and the change route in a single document. A quality agreement in place before the first production order saves the same conversation later, when a problem has already appeared. The change-control clause deserves particular attention for this product. A change of source route, from tea-derived to fermentation or the reverse, is not a supply detail: it can change the impurity profile, the EU regulatory position and the documents. Handle it as a specification change that needs the buyer's written approval, not as a substitution the supplier can make when stock is short. When a lot falls outside the agreed specification, the evidence is the retained sample and a joint re-test by the named method, not a picture of the drum. The agreement should name the referee laboratory, say who pays for it and set the turnaround. Start with the product hub for the catalog specification, then the COA page for the release tests and the compliance page for the market file. The MOQ glossary entry defines the term, the logistics page covers shipping and documents, and the quality page describes the release file. ### 05 The regulatory file for L-theanine URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-theanine/compliance/ Reviewed: 2026-11-20 L-theanine is supplied as the isolated L-enantiomer, CAS 3081-61-6, and its regulatory file turns on two things that a generic “theanine” order does not fix: the source route and the destination market. The specification and the COA describe the powder; the file adds the route, the limits and the label. The buyer's team owns that call; this page lists the documents and checks that belong in the file. In one lineThe specification describes the powder; the regulatory file shows the source route, the limits and the label for the destination. ## What belongs in the file The file for an L-theanine lot has to carry the version of the specification that was bought, the certificate for the released lot, the destination's rules on contaminants and labelling, and a record of what happens when the source or the process changes. The COA is a lot document, the TDS is the specification and the SDS is about handling; none of those three decides the market route, which is written down separately. Beyond the certificate, the pack should carry the allergen and GMO statements, the origin record for the manufacturing source, the residual-solvent statement, the source-route declaration and any market-specific declaration the importer needs. A versioned document list at the front of the folder makes the gaps visible before the order moves. ## European Union For the EU, the source route is the first question. L-theanine occurs naturally in tea, and material extracted from tea leaves relies on that history of use. Fermentation-derived or synthesised L-theanine has been treated as a novel food, and an application for the isolated material has been under assessment. As of this review, check the current novel-food catalogue, whether an authorisation has been adopted, and the specification attached to it. A tea-derived lot and a fermentation lot do not automatically share a regulatory route. General food law, labelling and contaminant limits sit alongside that route, and the current consolidated text is the reference. The EU regulatory notes collect the framework references. The finished product's dose and the member-state route are the buyer's decisions; the supplier's file supports them with the specification, the certificate and the source record. ## United States In the US, L-theanine is sold as a dietary ingredient, and the Supplement Facts panel names it. A structure/function statement needs substantiation and the DSHEA disclaimer, and no disease claim is open. If the intended use is a conventional food rather than a supplement, the basis is a GRAS determination or a prior sanction for that use; GRAS notices exist for defined L-theanine uses, but they are use-specific and do not cover every food category. The source route is part of the identity and the supplier's documentation, not a separate ingredient name. The buyer checks that the certificate and the specification match the material the label declares, and that any claim is reviewed on its own terms rather than inferred from the certificate. ## Contaminant limits for the dose Contaminant limits are set by what the consumer takes, not by the drum alone, so the lot result has to be converted through the daily dose. The figures below are a starting point for a food-supplement file; the destination's current text and the amount per serving decide the final number. Contaminant limits to confirm for the finished product | Parameter | Typical supplement reference | What the file should show | Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method, limit and the finished-product calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception that applies | Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result and method | Arsenic (As) | Customer or market limit | The agreed limit and the method, stated on the certificate The enantiomer is a specification line, not a contaminant. A D-theanine limit, if the buyer needs one, belongs in the identity section of the specification and on the certificate as a chiral HPLC result; it is not covered by the heavy-metal panel. The same applies to any caffeine limit for a tea-derived lot. ## Claims, label and the register The label carries L-theanine as the ingredient name, with the amount per serving and whatever source wording the market demands. Claim review is a separate exercise, done by the brand against the finished product, the ingredient form and the destination. The certificate is evidence about the powder; it is not evidence for a claim, and changing the claim does not change the specification. In the EU, the claims assessed for L-theanine in 2011 were not substantiated, and the register carries no authorised claim for the ingredient as of this review. “Relaxation” is a positioning word, not an authorised health claim, and no disease-related claim is open in either market. In the US, a structure/function statement needs substantiation and the DSHEA disclaimer. This site publishes the specification and makes no health claim. ## The document set The buyer's file needs the COA with the assay and its basis, the specific rotation, the infrared and HPLC identity, the chiral HPLC result where agreed, loss on drying, the metal panel and the micro count. The specification must name L-theanine, the L form and the source route; an assay without the rotation leaves the enantiomer open, and a certificate without the route leaves the EU question open. Add the TDS, the SDS, the allergen and GMO statements, the origin and residual-solvent records, and the source-route declaration. The product hub carries the catalog specification. ## Pre-order checklist - Specification version, CAS, L form and source route are named. - COA, TDS, SDS, allergen, GMO, origin and residual-solvent statements are on file. - The specific rotation and any chiral HPLC result are on the certificate. - The contaminant results are converted to the finished-product dose. - The EU novel-food status is checked against the declared route; the US basis is checked against the intended use. - The label and the claim have been reviewed for the destination. - The source, process and pack are under change control, and the quotation, specification and certificate refer to the same version. The identity page covers the analytical evidence, the MOQ page covers the order, and the quality page describes the release file. The methods library explains the tests behind the numbers. ### 06 How we prove a lot is L-theanine, not D- or DL-theanine URL: https://nutrition.rainwoodbio.com/products/amino-acids/l-theanine/identity/ Reviewed: 2026-11-20 A lot is L-theanine when four lines agree: the document names the L-enantiomer and CAS 3081-61-6, HPLC retention and the infrared spectrum match the reference, the specific rotation falls in the +7.5° to +9.0° window, and the assay, loss on drying and related substances close the mass balance. The assay alone cannot separate L-theanine from D-theanine or from a DL mixture. The rotation is the direct enantiomer check, and chiral HPLC is the quantitative one. In one lineIdentity is a set of agreeing measurements: HPLC and IR name the molecule, the rotation names the enantiomer, and the mass balance shows whether it has been diluted. ## Layers of evidence A certificate can carry the correct name and still leave the material unproven. Each layer below answers a separate question and needs its own evidence; for a chiral ingredient the first two are not the whole file. Layers of L-theanine identity | Layer | Question | Test | What it proves | Document | Is the L form named? | Name, CAS number, formula | Paperwork only | Chromatography | Is the molecule theanine? | HPLC retention against a standard | The molecule, not the enantiomer | Spectroscopy | Is the functional-group pattern consistent? | Infrared spectrum against a reference | The molecule, not the enantiomer | Optical | Is it the L form? | Specific rotation; chiral HPLC | The enantiomer | Mass balance | Is it diluted? | Assay, loss on drying, related substances | Consistency of the numbers An achiral HPLC column and an infrared spectrum see the same thing in L-theanine and D-theanine. They are enantiomers, with identical spectra and identical retention on an achiral phase. Only an optical method or a chiral separation can tell them apart, which is why the rotation row is not a formality. ## Specific rotation and the L/D ratio Specific rotation is the measured angle normalised by the path length and the concentration, so it is a property of the dissolved substance rather than of the sample size. The catalog states +7.5° to +9.0° at c=2 in water. A pure L-theanine standard sits near +8.5°; a racemic DL mixture sits near 0°, and a D-enriched sample rotates in the opposite direction. The enantiomeric excess connects the rotation to the ratio. A 95:5 L:D mixture has an excess of 90%, and its rotation is roughly 90% of the pure-L value, or about +7.65°. An 80:20 mixture has 60% excess and rotates at about +5.1°, outside the catalog window. The linear relation is an approximation, not a replacement for the chiral assay, but it shows why a rotation at the low end deserves a second test. Chiral HPLC gives the L and D area percentages directly, and the two results should agree. If the rotation is low while the chiral HPLC reports a high L percentage, check the concentration, the solvent and the temperature before concluding that the lot is wrong. If both point the same way, the lot is not the L grade. ## What XRD can and cannot show X-ray diffraction asks about the solid, not the solution: whether the material is crystalline and whether the pattern matches a reference. A crystalline lot gives sharp reflections; a blend with an amorphous carrier gives a weaker pattern or a halo. The test can compare two sources and can catch a solid that has been changed by processing, but it is not a purity assay and it does not measure the enantiomer. For L-theanine, XRD is a supporting test rather than a release line. Before accepting a “match” statement, ask for the reference pattern and the detection limit. A certificate that says only “XRD conforms” without the pattern has added little, and an XRD result cannot substitute for the rotation when the question is D-theanine. ## Substitution patterns Substitutions to look for in an L-theanine lot | Adulterant | What it does | Signal | Test | D-theanine or DL-theanine | Same molecule, wrong enantiomer | Rotation below +7.5° or near 0° | Polarimetry, chiral HPLC | Glycine | Cheap, sweet, white powder | Assay or rotation low; different spectrum | HPLC, IR, rotation | L-glutamine | Structurally related amino acid | Extra peak or wrong retention | HPLC, related substances | Maltodextrin or sugar | Dilution with a carrier | Assay low; mass balance fails | Assay, loss on drying, IR | Caffeine | Tea-derived carry-over, not a diluent | A peak the theanine method may not see | Caffeine screen by HPLC Appearance is the least useful clue: white to off-white covers a wide range and a bland carrier can match it. The rotation, the chromatogram and the mass balance carry the evidence. A certificate that gives appearance and assay but omits the rotation has not tested the substitution most likely to be attempted. ## Identity lines for the specification - “L-theanine, CAS 3081-61-6, C7H14N2O3, with the source route declared.” - “Assay 98.0–101.0% by HPLC, with the basis stated.” - “Identification by HPLC retention and infrared spectrum, both against a reference.” - “Specific rotation +7.5° to +9.0° (c=2, water); chiral HPLC L/D result where the enantiomer is part of the agreement.” - “Loss on drying ≤0.5%; particle size ≥95% through 80 mesh.” - “No D-theanine above the agreed limit; caffeine screened where the lot is tea-derived.” ## Questions to put to the supplier - Which enantiomer is this lot, and what specific rotation is reported, at which concentration and in which solvent? - Can you provide the HPLC chromatogram and the infrared spectrum, not only the assay percentage? - What is the L/D result by chiral HPLC, and what method was used? - Which source route produced the lot, and what carry-over screen accompanies it? - If the lot is disputed, will you accept a joint re-test on the retained sample? When those five answers are on the table, the identity file is complete; a certificate with only an assay figure is not. The product hub carries the catalog specification; the COA page shows where each figure sits on the certificate; the grades page covers the source route and the enantiomer; the comparison with GABA covers a second ingredient in the same category; the HPLC method note explains the separation; the quality page describes the release file. ### 01 What the COA for algal DHA oil actually contains URL: https://nutrition.rainwoodbio.com/products/fatty-acids/algal-dha-oil/coa/ Reviewed: 2026-11-20 An algal DHA oil certificate reports the DHA content of the oil by gas chromatography, the free fatty acid and peroxide values that describe its condition, and the moisture, heavy-metal and microbiological limits for the lot. The catalog specification is DHA 35.0–45.0% by GC with EPA ≤3.0%, free fatty acid ≤0.50%, peroxide value ≤5.0 meq O₂/kg and moisture ≤0.1%. The certificate confirms one lot against those limits; the specification is the gate, not the measurement. In one lineA DHA figure is only half the certificate: the GC profile fixes what the oil is, and free fatty acid, peroxide value and moisture say how well it has been kept. ## How to read the sheet A certificate is readable only when each line carries the parameter, the method and the limit. On an oil the release decision is made across three groups: the fatty-acid composition, the damage markers and the contaminants. A sheet that lists only the DHA percentage has left the other two groups out. Release tests for algal DHA oil | Parameter | Method | Release limit | Appearance | Visual | Clear to slightly hazy oil | DHA (C22:6) | GC-FID of methyl esters; peak against a DHA standard | 35.0–45.0% | EPA (C20:5) | GC-FID, same run | ≤3.0% | Free fatty acid | Titration as oleic acid | ≤0.50% | Peroxide value | Titrimetric; AOCS Cd 8b-90 or ISO 3960 | ≤5.0 meq O₂/kg | Moisture | Karl Fischer | ≤0.1% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Pour plate and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent Appearance is a weak limit but a useful early signal: a clear, pale yellow to golden oil can still be oxidised, and a hazy oil can be cold rather than damaged. The lot code, the manufacture date and the expiry date belong on the same sheet. An analysis without a lot code cannot be tied to the bottle or drum in front of you. ## What the DHA percentage is a percentage of The DHA figure is a mass fraction of the oil, produced by transesterifying the triglycerides to methyl esters and quantifying the C22:6 peak. Two GC setups can give different numbers from the same oil. An internal-standard calibration reports grams of DHA per 100 g of oil; an area-normalised run reports the composition of the fatty-acid fraction. The certificate should say which one it used, and whether the figure is on the oil as sold or on a dried basis. The usual convention on a supplement oil is the fatty-acid content after methylation, expressed on the oil as sold. That is not the same as the triglyceride content, because the glycerol backbone is removed in the analysis and is not part of the reported mass. A certificate that mixes the two conventions is not comparable with one that does not, even when both print “DHA 40%”. DHA is one fatty acid, not a synonym for omega-3. Algal oil is DHA-dominant with a small EPA fraction and a measurable DPA fraction, so a certificate that reports only “total omega-3” has not stated the DHA content that the label and the specification use. CAS 6217-54-5 identifies DHA as a substance; it does not identify the oil, its source or its concentration. ## Release limit versus batch result A limit is the boundary for release. A result is what the laboratory measured. The two belong in separate columns, with the method beside them. A result column that repeats the range is the gate copied out, not evidence that a measurement was made. The result side of the certificate | Test | Release limit | What the result must show | DHA | 35.0–45.0% | A measured percentage, with the GC setup and standard named | EPA | ≤3.0% | A measured percentage from the same run | Free fatty acid | ≤0.50% | A measured percentage, expressed as oleic acid | Peroxide value | ≤5.0 meq O₂/kg | A measured value, with the method and the test date | Moisture | ≤0.1% | A measured percentage by Karl Fischer The three damage markers answer different questions. Free fatty acid measures hydrolysis, the splitting of the triglyceride that moisture and heat accelerate. Peroxide value measures hydroperoxides, the first products of oxidation, and it can fall again as those hydroperoxides decompose. p-Anisidine value measures the aldehydes that follow, so it rises later and stays; it is not in the catalog specification for this oil, but it can be agreed as an additional line when oxidation is the question. Reading peroxide value alone can make an advanced sample look fresher than it is. ## What moves between batches Fermentation moves the fatty-acid profile: strain, carbon source, harvest time and the refining sequence all shift the DHA and EPA figures. A lot at the bottom of the 35.0–45.0% range is inside the specification, not a defect, but a run of lots at the same edge is a trend worth asking about. Refining also moves colour and the minor components; deodorisation reduces volatile odour compounds and can strip tocopherols, which leaves the oil with less protection after packing. Peroxide value, free fatty acid and moisture move after the oil leaves the reactor. A warm hold, a wet drum, an open headspace or a long transit can raise all three without any change in the DHA figure. The lot that arrives is not necessarily the lot that was released, which is why the certificate's test date and the pack's seal both matter. Retained samples turn single results into a trend. Compared with a limit, a result says pass or fail; compared with the previous five lots, it says which way the process and the handling are going. ## When an outside test earns its fee An outside laboratory earns its place for a new source, a first regulated-market shipment, a disputed identity or a fish-free claim that the file must support. The useful panel is not a repeat of the certificate: a full GC-FID profile with DHA, EPA and DPA, the sterol pattern, peroxide and p-anisidine values, free fatty acid, moisture, ICP-MS for the metal panel and a plate count with absence tests. Two details decide what the report is worth. A “not detected” line needs a limit of quantification, otherwise it describes the method rather than the sample. And the sample tested should be the sample retained, with the lot code on the report, so a contested result can be re-tested rather than argued about. ## What to compare between suppliers Compare six lines: the algal source and strain, the DHA result with the GC setup, the EPA and DPA figures from the same run, the oxidation pair with test dates, free fatty acid and moisture, and the pack and lot traceability. Two quotations that agree on DHA and differ on the other five are not describing the same oil. The catalog specification sits on the algal DHA oil product page. The spray-dried form is a different product with a carrier and its own certificate, covered on the algal DHA powder page. The GC and wet-chemistry methods are described in the methods section, and the release and retention workflow is on the quality page. ### 02 Algal DHA oil grades: DHA content, form and fill weight URL: https://nutrition.rainwoodbio.com/products/fatty-acids/algal-dha-oil/grades/ Reviewed: 2026-11-20 Algal DHA oil is standardised on its DHA content, and the catalog range is 35.0–45.0% by GC with EPA ≤3.0%. Within that range a 45% oil carries 450 mg of DHA per gram and a 35% oil carries 350 mg, so a 200 mg DHA declaration needs 0.44 g or 0.57 g of oil. The physical form is the second decision: the catalog product is a neat oil, and an oil supplied on a carrier is a separate specification with its own DHA basis. In one lineThe grade of an algal DHA oil is its DHA content and its physical form; a 35% oil and a 45% oil are the same material at different standardisations, not different products. ## Why the DHA figure is the grade The oil comes out of the algal fermentation with a natural DHA content, and the supplier standardises it to a target by selecting lots, blending them or concentrating the fatty acids. The 35.0–45.0% window is wide enough that two compliant lots can differ by nearly 30% in DHA per gram, which is why the target figure belongs in the order and not only in the specification range. The grade is a concentration, not a purity statement: a 45% oil is not “purer” than a 35% oil, it carries more DHA and less of the other fatty acids per gram. Two things are sometimes sold under the same name. A diluted oil has a carrier oil added to bring the DHA down to a lower figure; that is a formulated blend, not the catalog oil, and its ingredient list has to name the carrier oil. An oil on a carrier is the oil absorbed into a powder matrix, so its DHA is expressed on the powder and its handling is dry. Both are legitimate purchases, but neither is a different grade of the same neat oil. ## The catalog oil and the forms it is confused with Oil grades and forms at a glance | Form | DHA basis | DHA per gram | What changes | Catalog oil, 45.0% result | GC, oil as sold | 450 mg | Less oil mass per declared dose | Catalog oil, 35.0% result | GC, oil as sold | 350 mg | More oil mass for the same dose | Catalog oil, 40% result | GC, oil as sold | 400 mg | Same specification, different fill weight | Oil on a carrier, on request | Set by the oil load | Below the neat oil | Powder handling, carrier on the label | Oil diluted with a carrier oil | Declared blend | Set by the blend | Not the catalog grade; ingredient list changes The table is arithmetic, not a product list. A 40% result is an example inside the range, not a separate grade. A diluted oil is outside the catalog specification whatever its DHA figure, because the catalog oil has no added carrier. The first three rows describe the same product at different points in its range; the last two describe different products. ## What the oil is like to handle The catalog oil is clear to slightly hazy and pale yellow to golden. It is insoluble in water and soluble in fats and organic solvents, so it suits a softgel fill or an oil blend and does not suit a clear aqueous drink without an emulsifier. Cloudiness at low temperature is normal for a highly unsaturated oil and reverses on warming; it is not an identity failure, but the oil should be warmed and mixed before dispensing so that the fill is uniform. The 1 kg amber bottle is the trial and small-batch pack, and the amber wall is part of the protection against light. The 25 kg HDPE drum is the production pack; the inner liner and the headspace decide how much oxygen the oil meets in storage. Neither pack is a reason to leave the oil open: an oil that is pumped from an open drum in a warm room picks up oxygen and moisture at the surface, and the pump and the line should be closed where the process allows. ## The dose arithmetic The label declares a mass of DHA, and the oil weight follows from the DHA content of the lot. The calculations below are before any overage the brand decides to add, and they assume the label figure is DHA as fatty acid, the convention used on the certificate. Oil weight for a declared DHA amount, before overage | DHA declared | Oil at 35.0% DHA | Oil at 45.0% DHA | 100 mg | 0.29 g | 0.22 g | 200 mg | 0.57 g | 0.44 g | 250 mg | 0.71 g | 0.56 g | 500 mg | 1.43 g | 1.11 g A 500 mg softgel fill therefore carries 175–225 mg of DHA, depending on the lot, and a 1,000 mg fill carries 350–450 mg. That is the practical ceiling of the oil: a declaration above about 450 mg DHA per capsule needs a fill over 1 g, a divided dose or a more concentrated specification. The lot result, not the range midpoint, is what the fill calculation should use, because a 35% lot and a 45% lot differ by 100 mg of DHA in every gram. ## What to write into the specification - “Algal DHA oil, DHA 35.0–45.0% by GC (AOCS Ce 1b-89 or ISO 12966), EPA ≤3.0%, DPA reported.” - “Free fatty acid ≤0.50% as oleic acid; peroxide value ≤5.0 meq O₂/kg; moisture ≤0.1%.” - “Source: algal oil from the named strain; not fish oil; fish-free statement on file.” - “Appearance: clear to slightly hazy oil; no added carrier oil; antioxidants declared if present.” - “Heavy metals and microbiology as listed; pack and storage condition named.” - “Target DHA figure and destination market confirmed before the order.” The CAS number 6217-54-5 belongs beside the DHA line as the marker for the fatty acid, not as an identifier for the oil. The specification also needs the target DHA figure, because “35.0–45.0%” alone leaves the fill weight and the label declaration to be settled after the lot is chosen. ## When the oil is the wrong form A stick pack, a dry blend, a tablet or a clear beverage is a powder project: the oil separates, hazes or floats, and the powder on a carrier gives the formulator a dry ingredient with a declared DHA load. A very high single-capsule dose is also a different project, because the oil's concentration sets how much fill is needed, and the answer may be a divided dose rather than a larger softgel. The algal DHA oil product page carries the catalog specification. The algal DHA powder page covers the spray-dried alternative, and the oil versus powder comparison takes the carrier and label questions further. The GC methods are in the methods section, and the release workflow is on the quality page. ### 02.1 Algal DHA oil vs powder: the carrier, the dose and the label URL: https://nutrition.rainwoodbio.com/products/fatty-acids/algal-dha-oil/grades/algal-dha-oil-vs-algal-dha-powder/ Reviewed: 2026-11-20 Algal DHA oil and algal DHA powder carry the same fatty acid in different physical packages. The oil is a triglyceride oil at 35.0–45.0% DHA with no carrier; the standard powder is that oil microencapsulated on a modified-starch wall at ≥10.0% DHA. A 200 mg DHA declaration therefore needs 0.44–0.57 g of oil or 2.0 g of the 10% powder, and the ingredient list has to name the carrier in the powder. In one lineThe oil is the neat triglyceride and the powder is that oil carried on a starch wall, so the same DHA declaration needs different weights, different packs and a different ingredient list. ## What carries the DHA In the oil, nothing carries the DHA but the oil itself. The triglyceride is the delivery form, the DHA is esterified to glycerol, and the only other things in the bottle should be an antioxidant if one has been declared. “Carrier” in this product means what it does not have: there is no starch, no maltodextrin and no dilution oil in the catalog grade. In the powder, the carrier is the wall. The oil is emulsified into a starch matrix and spray-dried, so the particle is a shell of modified starch around droplets of oil. At 10% DHA from a 35–45% oil, the oil load is roughly 22–29% by mass and the rest is the wall and a little moisture. That wall is why the powder flows, disperses and can go into a stick pack, and it is also why the powder's ingredient list is longer than the oil's. The word is used for a third thing as well: a carrier oil added to dilute a high-DHA oil to a lower figure. That is a formulated blend, not the powder's starch wall and not the neat oil, and it must be declared. When a quotation says “carrier”, ask which of the three it means. ## The dose arithmetic The percentage converts a label declaration into a weigh-up. The table uses the catalog limits for the oil and the catalog minimum for the powder, before any overage. The oil's two columns are the ends of its specification range, not two products. Material weight for a declared DHA amount, before overage | DHA declared | Oil at 35.0% DHA | Oil at 45.0% DHA | Powder at 10.0% DHA | 100 mg | 0.29 g | 0.22 g | 1.0 g | 200 mg | 0.57 g | 0.44 g | 2.0 g | 250 mg | 0.71 g | 0.56 g | 2.5 g | 500 mg | 1.43 g | 1.11 g | 5.0 g The powder needs 3.5–4.5 times the oil's weight, depending on the oil's DHA result; at 40% DHA the factor is four. A 500 mg softgel filled with oil carries 175–225 mg of DHA; a 500 mg capsule filled with the 10% powder carries about 50 mg. A 200 mg declaration from the powder is therefore four capsules, or a larger capsule, or a different form — which is a design decision, not a quality difference between the two products. ## What the label has to say The oil's ingredient list is short: algal oil, with the source named. The powder's list adds the carrier, and modified starch belongs there because it is a substantial part of the particle, not a processing aid. A label that names only “algal DHA” on a powder has hidden the wall that makes the powder a powder. Both forms declare DHA per serving, and the figure has to match the form and the lot. In the EU, a supplement must state the amount of the substance with a nutritional effect, so the DHA figure belongs on the label as well as on the COA; in the US it belongs in the Supplement Facts panel. The source statement follows the destination rules, and the fish-free or vegan position depends on the line and on every carrier, not only on the algal oil. A specification figure such as “40% DHA” is not a label claim. It is the concentration the fill calculation uses, and the label declares the mass of DHA per serving that the finished product delivers. The two numbers are related by the arithmetic above, and they are not interchangeable. ## What each form does in a dosage form The oil suits a softgel, an oil blend, a liquid-filled capsule or an emulsion. It is insoluble in water, so a clear drink needs an emulsifier and a process, and a powder stick cannot take it without a carrier. A softgel is the compact option: one fill carries more DHA than any practical amount of the 10% powder, which is why a high-dose omega-3 product is usually an oil project. The powder suits a two-piece capsule, a tablet, a stick pack, a shaker, a gummy or a functional beverage. It disperses in water rather than dissolving — the oil is inside the wall, so the drink is a suspension — and it brings the carrier's mouthfeel and the wall's moisture sensitivity with it. A gummy or a beverage adds heat and water, so the powder's matrix trial is part of the development, not a formality. ## When to choose which Choose the oil when the dose is high, the package is a softgel or an oil blend, and a short ingredient list matters. Choose the powder when the package is dry, when a stick pack or a tablet is the target, or when the formula cannot take an oil. Choose neither by habit: the two are separate products with separate certificates, and a switch changes the fill weight, the label and often the market file. If the brief says only “algal DHA”, it has not chosen. The oil at 40% and the powder at 10% both answer to that phrase, and they deliver different amounts of DHA per gram, carry different carriers and need different packs. ## What to rewrite when you switch A switch is a change control, not a line edit. The specification has to name the form and the DHA basis, the carrier or its absence, the oxidation limits, the moisture limit, the pack and the fill weight. On the oil, moisture is ≤0.1% and the carrier line says none; on the powder, moisture is ≤5.0%, the carrier is modified starch and the particle size is ≥95% through 40 mesh. The peroxide limit can be the same number on both, but the powder also carries a p-anisidine limit because the wall does not stop oxidation. The algal DHA oil page carries the oil specification; the algal DHA powder page carries the powder specification; the oil grades page sets out the DHA range; the oil COA page shows the release tests; the methods section explains the GC work behind both. ### 03 Algal DHA oil stability: oxidation, light and the pack URL: https://nutrition.rainwoodbio.com/products/fatty-acids/algal-dha-oil/stability/ Reviewed: 2026-11-20 Algal DHA oil carries its DHA as a triglyceride with six double bonds, and those bonds react with oxygen long before the DHA assay shows a change. Peroxide value is the first marker, p-anisidine value follows as the hydroperoxides break down, and free fatty acid rises when water reaches the oil. The catalog limits are peroxide value ≤5.0 meq O₂/kg, free fatty acid ≤0.50% and moisture ≤0.1%; the shelf life comes from data on the actual pack. In one lineAlgal DHA oil fails by oxidation before the DHA figure moves, so peroxide value, p-anisidine value and free fatty acid are the numbers the pack has to hold. ## The oil in the bottle or the drum An amber bottle and an HDPE drum protect the oil in different ways. The bottle's wall limits light, the drum's wall limits light and impact, and both closures limit air exchange. Neither is an absolute barrier: HDPE lets a little oxygen through, and the headspace above the oil holds enough to start the reaction. A nitrogen flush lowers that reserve and is worth agreeing when the pack will wait in a warm store or travel a long route. Water is the quieter problem. At ≤0.1% moisture the oil has little room to absorb more, and any water that gets in drives hydrolysis and lifts free fatty acid. A drum stood on a damp floor, a bottle left uncapped between dispensing runs or a sample poured into a wet beaker can all move the moisture result without a visible change. Keep the pack closed and off the floor, and let a cold pack reach room temperature before opening so that condensation does not form on the oil. Light and heat act together. An amber bottle filters some light but is not a darkroom; a sample jar on a bench is the wrong container for a hold. A sealed pack in a cool, dark store is the normal condition, and a loading bay, a vehicle or a south-facing window is not. ## The oil in a fill, a blend or an emulsion A softgel carries the oil directly, and the shell slows oxygen transfer without stopping it. The fill can also take moisture from the shell, and the shell colour and the fill odour often show a problem before the peroxide value does. A two-piece capsule is a looser barrier and generally a shorter hold. An oil blend adds another fatty-acid profile to the fill, so the blend's oxidation behaviour is not the algal oil's behaviour. An emulsion is the hardest matrix. The oil is broken into small droplets, the interfacial area is large, and oxygen dissolved in the water or sitting in the headspace has only a short distance to travel. Heat from blending, homogenisation or a pasteurisation step adds to the load. A process that keeps the oil cool and excludes air does more for the shelf life than an antioxidant added at the end, though the two are usually used together. If an antioxidant is added, it belongs in the specification and on the label, and its depletion is part of the storage story. ## What drives degradation What moves algal DHA oil during storage | Factor | Effect on the oil | Practical control | Oxygen | Hydroperoxides form; PV rises, then p-AV | Nitrogen flush; small headspace; closed pack | Light | Faster oxidation; colour and odour drift | Amber bottle; opaque drum; dark store | Heat | Speeds oxidation and hydrolysis | Cool store; cool process; no hot hold | Iron and copper | Catalyse oxidation at trace levels | Stainless contact; no copper or iron fittings | Water | Hydrolysis; free fatty acid climbs | Dry store; closed liner; check the seal | Time | Antioxidant runs down; damage accumulates | Retest period; retained samples; trend review None of these acts alone. A warm, bright room with a damp floor is worse than three separate effects added together, and a clear bottle in a warm window combines light, heat and oxygen in one place. The useful question is not whether the oil is stable but how long it holds in a named pack at a named condition. ## Designing the study around the pack Start with the pack that will be sold, then choose the conditions. A long-term arm at 25 °C/60% relative humidity and an intermediate arm at 30 °C/65% relative humidity describe a warehouse; an accelerated arm at 40 °C/75% relative humidity stresses the pack. Add a light-exposure arm, because a dark incubator cannot show a photo-oxidation failure, and add a matrix arm when the oil goes into a softgel, a blend or an emulsion. At each point, measure DHA by GC, peroxide value, p-anisidine value, free fatty acid, moisture, appearance and odour. Report TOTOX as twice the peroxide value plus the p-anisidine value, and report the individual results rather than a pass statement. A peroxide value that rises and then falls while the p-anisidine value climbs is advanced oxidation, not recovery. The report should identify the pack, the lot family and the test dates, or the data cannot be tied to the material on the shelf. ## What the finished product adds A softgel, a capsule, a blend, an emulsion and a gummy each change the rate. The softgel shell is a barrier and a moisture source at once; the two-piece capsule is more permeable; the blend inherits its weakest oil; the emulsion adds water, shear and interfacial area; the gummy adds heat and a long drying step. What the bulk oil does over two years in a drum does not predict what the finished unit does over one year in a bottle. The overage is a brand decision. Extra DHA at manufacture can cover a loss over shelf life, but it does not fix a pack that admits oxygen, and it changes the label declaration. The pack, the process and the overage are one decision, and the study is what connects them. ## The number belongs to the pack We do not publish a single shelf-life number for algal DHA oil, because the pack and the storage regime set it. The retest period on the specification is the number that counts, and it rests on data for the exact pack. A figure that names no pack, no condition and no test panel describes nothing. At the end of the retest period, re-test the retained sample before extending use; never extend by assumption, and never carry a bulk figure into a repacked bottle. The product page shows the standard packs, the COA page shows the release panel, the MOQ page shows pack and lead time, the methods section shows the GC and wet-chemistry work, and the quality page shows the release and retention workflow. ### 04 Algal DHA oil: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/fatty-acids/algal-dha-oil/moq/ Reviewed: 2026-11-20 Algal DHA oil begins at 1 kg in an amber bottle, with a 25 kg HDPE drum for production, and the standard lead time is 1–7 days. A quotation can only be compared once the DHA target, the oxidation limits, the pack, the destination, the documents and the intended market are fixed. Those six items decide whether two offers describe the same oil. In one lineThe 1 kg order is a pack decision: the amber bottle is the smallest unit that carries a lot code, a sample and a certificate of its own. ## Why the minimum is 1 kg The 1 kg bottle is a working unit. It holds enough oil for a softgel or blend trial, a retained sample and an independent oxidation test, and it travels as a parcel, so a formulator can start before the production plan is signed. The bottle carries a lot code and a certificate; it is not a scoop taken from a drum. An order below 1 kg is a repack. The oil is drawn from a larger lot and put into another container, which adds a handling step, a new headspace and a second label, and the link to the original pack is only as good as the record kept. The 25 kg drum is the production unit: it cuts handling per kilogram but commits inventory and storage time, and every opening exposes the oil to air. The minimum is set by the pack, not by a sales target. ## Packs and what each one is for Packs for algal DHA oil | Pack | Net weight | Where it fits | What to watch | Amber bottle | 1 kg | Trial, sample, small batch | Light path through the shoulder; keep capped and upright | HDPE drum | 25 kg | Production | Liner, headspace and date of opening | Written split | Below 1 kg | Bench work only | A repack, not the catalog unit; carry the lot code The bottle and the drum hold the same oil and the same specification. What differs is the ratio of surface to volume, the headspace and the number of times the closure is opened. If a nitrogen flush is agreed, it works in either pack and belongs in the quotation; it is not part of the standard pack unless it is written there. A move to a customer-specific container is a change of pack, and the stability file has to follow it. ## Lead time and dispatch The 1–7 day window runs from order confirmation to dispatch. Picking, packing and the document set sit inside it; the sea or air transit, customs and the customer's own release sit outside. A customer-specific pack or an added handling step takes longer, and the extra time should be a separate line, not a surprise. Get the dispatch date as well as the range. A bottle usually moves as a parcel and a drum on a pallet, and the Incoterm fixes which side books the freight and clears entry. Send the COA in the same shipment as the oil. Heat is the transit hazard that matters most: a drum left on a hot dock or in a closed van can arrive with a higher peroxide value than it left with, and that is a storage event, not a manufacturing one. ## What a quotation has to state A quotation is comparable when these six lines are filled in: Six lines that make an algal DHA oil quotation comparable | What to state | Detail | Why it matters | Oil and source | Algal oil, strain, carrier position | The source drives the market file | DHA and limits | Range and target, EPA, FFA, PV, moisture | The fill weight and label arithmetic | Quantity and pack | Bottle, drum or written split | Dispatch, storage and openings | Destination and Incoterm | Country, address, trade term | Freight, clearance and duty | Documents | COA, specification, SDS, statements | Release at the border and in the plant | Use and market | Supplement or food, country | Which route applies A quotation that leaves out the DHA target has not priced the same oil as one that states it. The market matters for the same reason: the same lot can be inside the file for one destination and outside it for another. Commercial terms are not published here; they belong on the quotation. ## A sample has to be traceable The first bottle is the qualification lot. Run DHA by GC, peroxide and p-anisidine values, free fatty acid and moisture on it, and keep part of the same bottle as the retained sample. The lot code has to appear on the sample label, the COA and the quotation; if it does not, the sample is a demonstration rather than a qualification. Bench work under 1 kg is a split, not the catalog bottle. It is drawn from a bulk lot, logged as a separate handling step and cannot stand in for the 1 kg amber pack. Request the split in writing, and file its lot code with the trial data; the oil on the bench and the oil in the production drum can come from different lots even when both meet the same specification. ## Terms to settle before the first order Put the commercial terms and the quality terms on one page before the first production order: Incoterm, pack, dispatch window, specification revision, COA per lot, retained sample, retest period and the change-control route. A quality agreement signed before the order is easier than a negotiation after a complaint. Most oil complaints are about oxidation, so the agreement should name the tests and the method: peroxide value, p-anisidine value, free fatty acid and moisture on the retained sample, in a laboratory both sides accept. A photograph of a drum cannot show a peroxide value. If a lot misses the specification, the route is a joint re-test on the retained sample, and the agreement should say who pays for the referee. Start with the product page for the catalog figures, then read the COA page for the release panel and the stability page for the oxidation limits. The MOQ glossary entry defines the minimum, the lead-time entry covers the dispatch window, the methods section describes the GC test, and the quality page describes the release file. ### 05 The regulatory file for algal DHA oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/algal-dha-oil/compliance/ Reviewed: 2026-11-20 Algal DHA oil is a food-supplement ingredient with a route into each market, and the route depends on the source, the use level and the label. In the EU the oil is a novel food listed in the Union list; in the US it is a dietary ingredient with a GRAS history; in the UK the retained novel-food framework and the GB register apply. The buyer's regulatory team confirms the route, and this page lists the file that supports it. In one linePermission for algal DHA oil is a route, not a property of the oil: the source, the use level and the label have to line up in each market. ## Four checks, not one An omega-3 oil is checked at four levels: the route that makes it lawful, the food category and use level, the contaminants, and the label with any claim on it. The four fail on their own. A lot can sit inside every metal limit and still be outside the route; a route can be right while the label omits the source. “EU compliant” answers at most one of the four. The file therefore holds the specification, the lot certificate, the source and process record, the destination route and the label review. A certificate proves a lot, not a market permission. ## The European Union Food supplements sit under Directive 2002/46/EC, which harmonises the vitamin and mineral forms and leaves other substances to national law. Above that sits Regulation (EU) 2015/2283 on novel foods: a food not eaten significantly in the EU before 15 May 1997 needs an authorisation, and authorised items are listed in the Union list in Implementing Regulation (EU) 2017/2470. The list carries entries for DHA-rich oil from Schizochytrium sp. and for oil from Ulkenia sp., each with conditions and a maximum intake. The strain decides which entry is relevant, so the source statement belongs in the regulatory file. The entry authorises the oil, not every blend that contains it. A diluted oil or an added antioxidant brings its own status and label position. Labelling follows Regulation (EU) 1169/2011, and a supplement has to state the amount of the substance with a nutritional effect, so the DHA figure belongs on the label as well as on the COA. Confirm the current entry, maximum and designation before the label is set; this summary is as of this review. ## The United States In the US the oil is a dietary supplement ingredient under DSHEA. Nothing is approved before marketing, so the framework is safety, GMP and labelling: the facility follows 21 CFR 111, the label 21 CFR 101, and the ingredient needs a lawful basis, which for DHA-rich algal oil has usually been a GRAS position or a new dietary ingredient notification. GRAS status belongs to a substance, source and use, so the supplier should name the notice or notification it relies on. Algae is not a major allergen, and the oil is not a fish ingredient, but a fish-free claim depends on the line and on every carrier in the formula, not only on the oil. A structure/function statement is allowed for a supplement with the required disclaimer; a disease claim is not. The supplier provides the specification and the numbers, and the brand owns the wording. ## The United Kingdom Great Britain applies retained food law: the novel-food Regulation as retained, the GB register kept by the FSA, the food-supplement regulations and the retained labelling rules. The EU Union list does not apply in GB, so an EU entry is evidence about the oil, not the GB authorisation; the register is what to check. Northern Ireland follows the EU regime, so a product sold across the UK can face two routes. The ship-to address settles which regime applies, and the buyer's team records the choice with the order. ## Contaminants and the specification The metal panel is calculated on the finished product, not only measured on the drum. The limits below are the catalog panel and the EU supplement ceilings at this review; the text in force at the destination and the daily dose decide the final figure. Metal limits for algal DHA oil and the EU supplement ceilings at this review | Parameter | Catalog limit | EU supplement ceiling | Note | Lead (Pb) | ≤3 mg/kg | 3.0 mg/kg | Regulation (EU) 2023/915 | Cadmium (Cd) | ≤1 mg/kg | 1.0 mg/kg | Category exceptions exist | Mercury (Hg) | ≤0.1 mg/kg | 0.10 mg/kg | Regulation (EU) 2023/915 | Arsenic (As) | ≤2 mg/kg | No harmonised maximum | National or buyer limits apply | Peroxide value | ≤5.0 meq O₂/kg | Not a regulatory maximum | A lipid-quality parameter, not a contaminant | Free fatty acid | ≤0.50% | Not a regulatory maximum | Agreed in the specification Peroxide value and free fatty acid belong in the specification and the stability file, not in the contaminant table of a regulation. Moisture at ≤0.1% is also a quality limit. ## Where the claim stops In the EU and the UK, Regulation 1924/2006 and its GB mirror set the claim rules. Claims must be authorised: the Annex has a nutrition claim for omega-3 fatty acids, with a minimum per 100 g and per 100 kcal, and the DHA health claims carry a fixed wording and a minimum daily intake, 250 mg of DHA at this review. A 40% oil delivers 400 mg of DHA per gram, so the distance between that intake and the serving weight is arithmetic, not a claim. In the US a structure/function statement is allowed for a supplement with the required disclaimer; a disease claim is not, unless it is an authorised qualified health claim. The supplier publishes the specification and makes no health claim; the brand's reviewer owns the wording and the substantiation. ## Documents for the file Documents in an algal DHA oil supplement file | Document | What it establishes | Common gap | Specification | Source, DHA range, oxidation limits and methods | No strain or target DHA figure | Batch COA | The lot passed its release tests | Results that repeat the range | Source and allergen statement | Algal oil, strain, fish-free position | “Fish-free” without a line check | Novel-food reference | The entry the oil relies on | A generic algal-oil statement with no entry | Oxidation data | Peroxide, anisidine and free fatty acid over storage | Release figures only | Change-control record | Source, process, antioxidant or pack changes | Silent substitution of a carrier oil ## Checklist before the first order - The specification names the algal source, the DHA range and the target figure. - The COA, TDS, SDS, allergen, GMO, origin and residual-solvent papers are in the folder. - The novel-food or dietary-ingredient route is confirmed for the destination. - The metal results are carried through to the finished-product dose. - The label names the oil and declares the DHA amount; any claim has been reviewed. - Source, process, antioxidant and pack are under change control. The catalog specification sits on the algal DHA oil product page; the spray-dried form has its own file on the algal DHA powder page. The methods section covers the analytical evidence, the quality page sets out the release file, and the EU regulatory notes collect the framework references. ### 06 How we prove an algal DHA oil lot is DHA URL: https://nutrition.rainwoodbio.com/products/fatty-acids/algal-dha-oil/identity/ Reviewed: 2026-11-20 An algal DHA oil lot is identified by its whole fatty-acid profile, not by a single DHA percentage. The GC run should show DHA at 35.0–45.0%, EPA at or below 3.0%, a measurable DPA fraction and the saturated and monounsaturated acids that belong to the algal oil; a sterol pattern and the oxidation figures then separate a genuine algal oil from a blend. The DHA figure alone can be reached by adding DHA to another oil. In one lineDHA can be added to an oil; only the whole fatty-acid profile, the sterol pattern and the oxidation figures show that the oil is algal and has been kept. ## The four identity layers A certificate can carry the right name and still leave the oil unproven. Each layer below answers a different question, and each needs its own measurement. A supplier who stops at the first has shown paperwork, not a sample. Four layers of algal DHA oil identity | Stage | Question it answers | Measurement | What it shows | Document | Is the material named? | Product name, algal source, CAS 6217-54-5 | Paperwork only | Chromatography | Is the fatty-acid profile algal? | GC-FID of methyl esters, full profile | The oil's composition, not its source | Sterols | Is another oil present? | Sterol profile by GC | Vegetable-oil dilution | Condition | Has the oil been kept? | PV, p-AV, FFA, moisture, appearance | Oxidation and hydrolysis ## The ratios inside the profile The profile is a set of ratios, and the ratios are what a single DHA result hides. At the lowest DHA figure and the highest EPA figure the catalog allows, 35.0% and 3.0%, the ratio is about 12:1; at 45.0% DHA with EPA at 3.0% it is about 15:1. An algal oil is DHA-dominant in that way. A fish oil is not: it carries a larger EPA share, so a DHA/EPA ratio far below the algal range is a signal that the source or the blend has changed. The rest of the profile matters as much. Algal oil carries palmitic and myristic acids and a low level of oleic acid; a large linoleic acid peak points to a vegetable oil such as sunflower or soy, which is a common diluent. DPA is reported in the same run, and its presence at a low level is consistent with algal oil; it is not a release limit in the catalog. None of these ratios is a purity assay on its own. They are a screen that says whether the DHA figure is plausible for the oil, and they become evidence when the chromatogram is supplied with the result. Check the basis before comparing ratios. A profile normalised to peak area describes the composition of the fatty-acid fraction, while an internal-standard result describes grams per 100 g of oil. The two are close when the oil is pure and diverge when it is diluted or when the injection is off. The certificate should name the basis, and the ratios should be calculated from the same run. ## X-ray diffraction and the solid-state question An oil has no crystal lattice at room temperature, so X-ray diffraction is not an identity test for algal DHA oil as sold. The technique answers a solid-state question: is a powder crystalline, and does its pattern match a reference? It belongs to the spray-dried form, where it can distinguish a crystalline carrier or a crystalline fraction from an amorphous matrix, and it can compare lots from two sources. It does not measure the fatty-acid profile and it does not prove the algal source. For the oil, the practical physical checks are different. FTIR confirms the ester and unsaturation bands, a cold test describes how the oil crystallises when chilled, and viscosity and appearance describe handling. None of them replaces the GC profile. If a supplier offers an XRD “match” for an oil, ask what was actually tested; the answer is usually the carrier or a crystallised fraction, not the oil in the bottle. ## Substitutions and their signals Signals of a substitution in algal DHA oil | Adulterant | What it does | Signal | Test | Vegetable oil | Dilutes DHA; adds linoleic and oleic acids | Large C18:2 peak; sterol pattern changes | Full GC profile; sterols | Fish oil | Raises EPA; changes the DPA pattern | DHA/EPA ratio falls below the algal range | GC profile against the EPA limit | DHA concentrate | Keeps the DHA figure; changes the rest of the profile | DHA passes, minor acids do not fit | Full profile; source traceability | Oxidised oil | Fresh oil blended to hit PV or FFA | p-Anisidine value and TOTOX stay high | PV, p-AV, FFA and TOTOX | Water | Raises moisture and hydrolysis | Moisture above 0.1%; FFA rising | Karl Fischer; FFA titration Colour is the weakest signal. A pale yellow to golden oil covers a wide range, and a blend can be matched to it. The stronger signals are the linoleic acid level, the DHA/EPA ratio, the sterol pattern and the oxidation pair. A certificate that reports appearance and DHA but not the full profile has not tested the substitution that matters most. ## How to write identity into the specification - “Algal DHA oil from the named strain; DHA 35.0–45.0% by GC; EPA ≤3.0%; DPA reported.” - “Full fatty-acid profile reported with the chromatogram; GC setup and basis stated.” - “Free fatty acid ≤0.50%; peroxide value ≤5.0 meq O₂/kg; moisture ≤0.1%.” - “No added carrier oil; antioxidants declared if present.” - “Sterol profile available on request; source statement and fish-free statement on file.” - “Lot code, manufacture date and pack on the certificate and the retained sample.” ## Five questions for the supplier - Which algal strain and process produced this lot, and is that on the source statement? - Can you provide the full GC-FID profile and chromatogram, not only the DHA percentage? - What are the EPA and DPA figures from the same run, and what is the DHA/EPA ratio? - What are the peroxide, p-anisidine, free fatty acid and moisture results for this lot, with test dates? - If identity is contested, will you re-test the retained sample jointly? Five direct answers make an identity file; one DHA percentage does not. The product hub holds the catalog specification; the COA page places each figure on the certificate; the powder page covers the carrier-based form; the methods section explains the GC work; the quality page describes the retained sample. ### 01 What the COA for CLA oil actually contains URL: https://nutrition.rainwoodbio.com/products/fatty-acids/cla-oil/coa/ Reviewed: 2026-11-20 A CLA oil certificate reports the CLA figure by gas chromatography, the share taken by the two main isomers, free fatty acid, peroxide value, moisture, heavy metals and microbiology, each line beside its method. The CLA result needs a stated basis, because a percentage of total fatty acids and a percentage by weight of oil are not the same number, and the certificate should also name the esterified form. The limits below are the catalog specification; the batch COA confirms a pack. In one lineThe CLA percentage only compares across lots when the certificate states its basis, the isomer pair and the esterified form beside it. ## What the certificate reports Every line needs the measured quantity, the method that produced it, and the limit the lot was released against. The identity row and the CLA row answer different questions — whether the oil is conjugated, and how much CLA it carries. Release lines on a CLA oil certificate | Parameter | Method | Release limit | Appearance | Visual | Clear to slightly hazy oil | Identification | GC profile against a reference | Profile conforms | CLA content | GC of fatty acid methyl esters | 70.0–80.0% | cis-9,trans-11 + trans-10,cis-12 | GC with isomer resolution | ≥90.0% of CLA | Free fatty acid | Titrimetric | ≤0.50% | Peroxide value | Iodometric | ≤5.0 meq O₂/kg | Moisture | Karl Fischer | ≤0.1% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent A CLA concentrate is a family of positional and geometric isomers, and the two named here are the ones specifications list. A certificate with the total and no split has left the rest open. ## The three bases behind one figure The commercial CLA figure is a percentage of total fatty acids. The laboratory transesterifies the oil, separates the methyl esters on a capillary column and normalises the peak areas, so the result describes the fatty-acid pool rather than the oil as weighed. In a triglyceride the glycerol backbone is roughly 5% of the mass, so an 80.0% fatty-acid figure is about 0.76 g of CLA per gram of oil. If the material is free fatty acids the glycerol is absent and the two figures converge, which is one more reason the form belongs on the certificate. “≥90.0% of CLA” has a basis of its own: it is a share of the CLA pool, not of the oil. At the top of the range the two isomers together are at least 72 percentage points of the oil's fatty acids; at the bottom, the same 90% is 63 points. A certificate that reports the pair against the oil and one that reports it against CLA describe different quantities and read alike. Free fatty acid is the third basis. The ≤0.50% limit describes the unesterified fraction, and it is a clue to the form rather than a substitute for naming it: a CLA supplied as free fatty acids carries an acid value of a different order. Ask which form the lot is in and write the answer beside the CLA range. The label calculation uses all three: take the CLA figure, identify its basis, apply the glycerol correction if the oil is a triglyceride, multiply by the fill weight. Written down once, that arithmetic stops a label declaring 80% from sitting on a fill that delivers 76%. ## The limit and the result A release limit is the boundary a lot must sit inside; the batch result is the figure the bench produced. Both belong on the page, in separate columns. The result column, line by line | Parameter | Release limit | What the result should show | CLA content | 70.0–80.0% | The percentage with its basis and column | Isomer pair | ≥90.0% of CLA | The two isomers, their sum and the split | Free fatty acid | ≤0.50% | The percentage and its expression basis | Peroxide value | ≤5.0 meq O₂/kg | The number, which measures oxidation already taken up | Moisture | ≤0.1% | The percentage by Karl Fischer | Heavy metals | Per element | A figure in mg/kg for each element, never a sum “Passes specification” is a conclusion the reader should reach from the numbers. With peroxide value the distance from the limit is the useful part: a lot at 4.8 meq O₂/kg is inside a ≤5.0 limit and has already spent most of its oxidation allowance. A sum of heavy metals hides the element that matters. ## What moves between lots The CLA figure is a reaction yield, not a constant. Alkali isomerisation of a linoleic-rich oil converts linoleic acid into the conjugated isomers, and the conversion, the catalyst and the hold time decide where in the window a lot lands. Two released lots can be more than 14% apart in CLA per gram, a fill-weight question for a softgel line even when both meet the specification. The isomer split moves too. A process run hotter or longer returns a different pair, and the two named isomers do not behave identically in a formula. A shift inside the 90% gate is not a release failure, but it is worth a question when the formula was built on one distribution. Oxidation values move with refining and storage. Deodorisation lowers peroxide value, then the pack decides how fast it climbs back; free fatty acid follows moisture. Colour and clarity follow that history, so a duller batch can be older or differently refined. ## When an outside test earns its place An outside test pays on a new source, a first consignment into a regulated market, an unnamed form, or a contested result. Do not repeat the whole certificate: the panel worth ordering is gas chromatography with the chromatogram for the profile and the isomer split, peroxide value, free fatty acid, moisture, ICP-MS for the metals and microbiology. The isomer separation needs a long bis-cyanopropyl polysiloxane column and a report that shows the two isomers resolved. Add the process-contaminant panel for a refined oil — 3-MCPD and its fatty acid esters, glycidyl fatty acid esters, polycyclic aromatic hydrocarbons and pesticides — plus a mineral-oil hydrocarbon screen where the destination asks. If a blend is suspected, a sterol and tocopherol pattern describes the feedstock. Request the limit of quantification for each screen: an undetected result without that number describes the method, not the oil. ## Comparing two suppliers Six lines make the comparison: form and CAS number; CLA figure and its basis; isomer sum and split; free fatty acid and peroxide value; metal panel and microbiology; pack and lot code. Two quotations that agree on the CLA figure but differ on the basis or the isomers are not describing the same oil. Traceability is the second layer: who ran the lot, on which feedstock, through which isomerisation and refining steps, because those steps explain the numbers. The catalog specification is on the CLA oil product page; the powder is a separate product with its own limits, listed on the CLA powder page. The methods behind the panel are indexed under methods, and the release and retained-sample workflow is on the quality page. ### 02 CLA oil grades: concentration, form and isomer split URL: https://nutrition.rainwoodbio.com/products/fatty-acids/cla-oil/grades/ Reviewed: 2026-11-20 CLA oil is quoted as a concentration inside a 70–80% window and in one of two esterified forms, so a grade is that pair of decisions plus the isomer distribution behind it. An 80% oil carries about 14% more CLA per gram than a 70% oil, and a triglyceride oil and a free-acid oil with the same CLA figure behave differently at the balance. The ≥10% powder is a separate product rather than a lower grade of the same oil. In one lineGrade is a concentration and a form decision before it is a brand name: an 80% oil carries about 14% more CLA per gram than a 70% oil, and the triglyceride and free-acid forms differ in acid value and in the label. ## Why CLA oil comes in grades Commercial CLA is made by conjugating the linoleic acid of a high-linoleic feedstock, usually safflower or sunflower oil, and then concentrating the conjugated fatty acids. The concentration step decides whether the lot sits near 70% or near 80%, and the route decides what the rest of the oil is: unreacted linoleic and oleic acid, palmitic and stearic acid, and a small share of other conjugated isomers. Two variables travel with the concentration. The first is the esterified form. A triglyceride retains the glycerol backbone, so the oil is a fat with a low free-acid value; a free-acid product has been hydrolysed, carries a high acid value and behaves as a fatty acid mixture rather than as a fat. The second is the isomer distribution: the catalog fixes the two named isomers at ≥90.0% of CLA but not the split between them, so two lots can meet the same line and still differ. ## The grades side by side What changes across CLA oil grades | Property | 70% grade | 80% grade | Why it matters | CLA as fatty acids | 70.0% | 80.0% | Fill weight per label figure | CLA per gram of triglyceride oil | About 0.67 g | About 0.76 g | Glycerol takes about 5% of the mass | Residual linoleic and oleic acid | Higher | Lower | Profile shape and oxidation behaviour | Free fatty acid | ≤0.50% for an esterified oil | ≤0.50% for an esterified oil | A free-acid grade is a different purchase | Isomer pair | ≥90.0% of CLA | ≥90.0% of CLA | The split is agreed separately | Peroxide value | ≤5.0 meq O₂/kg | ≤5.0 meq O₂/kg | Oxidation gate, not a grade marker The two columns are not a ranking: a 70% oil is not a defective 80% oil. What changes is how much oil the formula needs and how much residual fatty acid arrives with it. A buyer who specifies “CLA 80%” and accepts 70% at the intake has taken a different product without redoing the fill weight. The form deserves its own line on the purchase order. A triglyceride and a free-acid CLA are both described as “CLA oil”, and the certificate looks similar until the acid value is read. Ask for the form in writing, and put the acid value or the free fatty acid limit beside it. ## Appearance, clarity and handling The catalog appearance is a clear to slightly hazy oil, pale yellow in the usual refined grade. Colour is a weak quality signal: refining and storage both move it, and a darker oil can still meet the CLA and oxidation limits while a pale one can be part-way through oxidation. Clarity is more useful as a handling note than as a specification. CLA is insoluble in water and soluble in fats and organic solvents, so it mixes into oil blends and softgel fills without an emulsifier. Some CLA isomer mixtures thicken or cloud at refrigerator temperature; the change reverses on gentle warming and is not an identity failure, but a customer who stores the oil cold should agree how it is handled. Warm the container gently and mix before weighing, and keep it closed between draws. ## Dose arithmetic on the grade The label declares a mass of CLA, so the grade sets the oil mass that carries it. The table works the arithmetic at both ends of the catalog range, before the glycerol correction. Oil mass needed for a declared CLA figure | CLA declared | At 70% CLA | At 80% CLA | Note | 350 mg | 500 mg | 438 mg | Small softgel range | 700 mg | 1,000 mg | 875 mg | Single 1 g fill | 1,000 mg | 1,429 mg | 1,250 mg | Above a standard 1 g fill These are label figures, not intake recommendations. Two corrections sit behind them. The glycerol correction applies when the oil is a triglyceride: the fatty-acid figure is not the oil mass, so 875 mg of an 80% triglyceride oil delivers about 665 mg of CLA, and the fill has to rise to about 921 mg to reach the declared 700 mg. The isomer correction applies when the label names one isomer: a c9,t11 declaration needs the measured split, because the catalog fixes only the sum of the two. An overage is a third, separate decision. It is the extra material added so the label claim still holds at the end of the shelf life, and it is justified by the stability curve for the pack, not by the grade. Do not fold an overage into the grade conversion; a lot at the top of the range is not an overage. ## What to write into the specification - “Conjugated linoleic acid oil, CAS 2420-56-6, CLA 70.0–80.0% by GC.” - “Esterified form: triglyceride or free fatty acid, stated on the certificate.” - “cis-9,trans-11 and trans-10,cis-12 ≥90.0% of CLA, with the split reported.” - “Free fatty acid ≤0.50%; peroxide value ≤5.0 meq O₂/kg; moisture ≤0.1%.” - “Appearance clear to slightly hazy; heavy metals and microbiology as listed.” - “Grade, pack and destination market confirmed before the order.” A specification that names only “CLA 80%” has fixed one of the three axes. The form and the isomer split are the other two, and they are the ones a substitute lot will differ on. ## When the oil is the wrong grade A dry blend, a tablet or a stick pack cannot take an oil at the inclusion the label needs, which is why the microencapsulated powder exists at ≥10% CLA on a starch carrier. Choosing the powder is a change of product, not a change of grade: the carrier is declared, the dose arithmetic moves by a factor of about eight and the oxidation route changes. The comparison is set out on the oil against powder page. Within the oil, the wrong grade is usually a concentration mismatch. A formula built on 80% and supplied at 70% underdelivers unless the fill weight is recalculated, and a formula built on 70% and supplied at 80% overdelivers. If the market file or the customer specification names one concentration, the catalog range is not a licence to ship any point inside it. The catalog specification is on the CLA oil product page. The release lines are on the COA page, the oxidation behaviour is on the stability page, the powder is specified on the CLA powder page, the methods are indexed under methods, and the release workflow is on the quality page. ### 02.1 CLA oil vs CLA powder: the carrier, the dose and the label URL: https://nutrition.rainwoodbio.com/products/fatty-acids/cla-oil/grades/cla-oil-vs-cla-powder/ Reviewed: 2026-11-20 The oil carries 70–80% CLA as fatty acids; the microencapsulated powder carries ≥10% CLA on a starch carrier. The same label figure therefore needs about seven to eight times the powder mass, and the powder brings a carrier that has to be declared. The oil is a fat a formulator can blend into a softgel fill; the powder is a dispersible solid for sticks, dry blends and high-mass formats. In one lineAt 80% CLA the oil carries eight times the CLA of the 10% powder per gram, so the choice is a fill-weight and carrier decision before it is a label decision. ## The carrier is the real difference The oil has no carrier to declare. It is CLA with a small antioxidant package, and everything else in the certificate is the fatty-acid balance. The powder is the opposite: the CLA arrives inside an oil that has been emulsified into a starch matrix and dried, so most of the powder is carrier and moisture rather than CLA. At 10% CLA from an 80% oil, the oil load is about 12.5%, which leaves roughly 87% of the powder as starch, antioxidant and water. That arithmetic decides what the label says and what the process handles. A modified starch carrier must be declared, and it carries its own allergen and source statement; the oil's antioxidant system is declared too, but there is no bulking agent behind it. The powder specification also carries lines the oil does not: p-anisidine value ≤20.0, a particle size of ≥95% through 40 mesh, and moisture at ≤5.0% against the oil's ≤0.1%. Read the peroxide value carefully on the powder. The oil limit of ≤5.0 meq O₂/kg is stated on the oil; the powder's limit is stated on the powder, and the units are not interchangeable if one is measured on the powder and the other on the extracted oil. At a 12.5% oil load, a result of 4 meq/kg on the powder corresponds to about 32 meq/kg on the oil inside it. Ask which basis the certificate uses before comparing the two numbers. ## The same label figure in two masses The label declares a mass of CLA. The table converts that figure into product mass at both ends of the oil range and at the powder's catalog minimum. Product mass needed for a declared CLA figure | CLA declared | Oil at 80% | Oil at 70% | Powder at 10% | 300 mg | 375 mg | 429 mg | 3,000 mg | 600 mg | 750 mg | 857 mg | 6,000 mg | 800 mg | 1,000 mg | 1,143 mg | 8,000 mg A 1,000 mg softgel filled with the 80% oil delivers about 800 mg of CLA as fatty acids, before the glycerol correction. The same 1,000 mg capsule filled with the 10% powder delivers about 100 mg, so reaching 800 mg from the powder takes about 8,000 mg — roughly seven 1,200 mg capsules. The powder is not a weaker version of the oil; it is a format for products that can carry grams rather than milligrams, such as a stick pack or a dry blend. Neither column is an intake recommendation. The fill weight, the number of units per serving and the overage are the formulator's decisions, and the arithmetic above is only the conversion between a CLA figure and the mass that carries it. ## The isomer pair crosses both products The oil's catalog line fixes cis-9,trans-11 and trans-10,cis-12 at ≥90.0% of CLA and leaves the split to the certificate. The powder's catalog table lists the total CLA at ≥10.0% and does not carry the isomer line, so a buyer who needs the pair declared has to ask for it and put it in the powder specification. Ten per cent CLA with a 90% pair is at least 9% of the powder mass as the two named isomers. Both products should report the split, because the arithmetic for a label that names one isomer depends on it, and because a change of feedstock shows up in the split before it shows up in the total. A powder made from an oil with a different isomer distribution is a different label ingredient even when the 10% figure is identical. ## What the label has to declare In the EU the ingredient list carries the oil or the powder with its carrier, the nutrition declaration carries fat and saturates, and the CLA amount is stated per portion from the product mass and the CLA figure. In the US the Supplement Facts panel names conjugated linoleic acid per serving, and the carrier appears in the ingredients list. The CLA figure needs its basis on both sides: per serving, from the declared product, and on the fatty-acid basis the certificate uses. A “water-dispersible” or “mixes clear” statement belongs to the powder, not to the oil. One point of US nutrition labelling deserves the reviewer's attention rather than an assumption: the trans fat definition covers trans double bonds in isolated, non-conjugated positions, so a conjugated CLA is treated differently from a partially hydrogenated fat. The reviewer confirms the current text before the panel is set. ## Handling follows the form The oil goes into an amber bottle or a nitrogen-flushed drum because oxygen and light are its failure route, and a softgel protects the fill with an opaque shell and a low-oxygen headspace. The powder goes into a foil pouch because moisture and light are its failure route, and the pouch seam is the weak point. Neither pack can be swapped for the other without a new stability file. At the bench the oil is warmed gently and mixed before weighing, and the bottle is closed between draws; the powder is kept dry, resealed, and trialled in the matrix for taste and for ringing in a beverage. The powder is dispersible rather than soluble, so a clear drink needs an emulsified oil with its own stability data, not a starch powder stirred in. ## When to choose the oil and when the powder Choose the oil for a softgel, an oil blend or a lipid-based fill, where a liquid carrier is wanted and the CLA figure is reached in about a gram of fill. Choose the powder for a hard capsule, a tablet, a stick pack or a dry blend, where a free-flowing solid is needed and a few grams per serving are acceptable. A switch is a new specification, a new label and a new stability file, not a unit conversion. The oil is specified on the CLA oil product page; the powder is specified on the CLA powder page; the grades page places the two in the wider range; the analytical methods are indexed under methods; and the release workflow is described on the quality page. ### 03 CLA oil stability: oxidation, pack and retest period URL: https://nutrition.rainwoodbio.com/products/fatty-acids/cla-oil/stability/ Reviewed: 2026-11-20 CLA oil fails by oxidation before the CLA assay moves. The conjugated diene that defines the material is a ready target for oxygen, so peroxide value rises first, p-anisidine value follows as secondary aldehydes form, and free fatty acid climbs when moisture reaches the oil. The pack, the headspace and the storage temperature set the rate, and light passes straight through a clear bottle. In one lineCLA oil fails at the peroxide value first: the conjugated diene takes up oxygen before the CLA figure moves, so the headspace and the pack decide the shelf life. ## The neat oil in its sealed pack The release limits are peroxide value ≤5.0 meq O₂/kg, free fatty acid ≤0.50% and moisture ≤0.1%. Those are gates at filling, not buffers for storage. Residual water and water vapour both drive hydrolysis, and free fatty acid is the value that climbs; a drum left open in a damp room is no longer in the condition it was tested under. Oxygen matters more. Oxidation starts at the oil surface and continues in whatever air sits above it, so a full drum ages more slowly than one that has been drawn down. The 1 kg amber bottle and the 25 kg HDPE drum both limit light, and the bottle is the pack that gets opened most often. Nitrogen can displace the headspace at filling, but the flush has to be specified and checked; without a measurement it is an assumption. Once a pack is open, decant the remainder into a smaller container that leaves little air. Heat raises the rate of every one of those reactions, and a store beside a heater or a drum in a hot loading bay is a different condition from a temperature-controlled room. A winter delivery that arrives cold should be allowed to equilibrate before the pack is opened, so that condensation does not form on the oil. ## There is no aqueous solution, but there are dispersions CLA oil is insoluble in water and is supplied as an oil, so the systems that matter are the ones it is built into: oil blends, oil-in-water emulsions and softgel fills. Each changes the oxidation rate, and none inherits the bulk oil's result. In a blend the most unsaturated oil usually governs the induction period, so a modest share of CLA can pull a whole blend down. In an emulsion the oil sits in small droplets, the interfacial area is large, and oxygen, light and trace metals meet the oil at the interface; the emulsifier, the pH and the homogenisation energy can matter more than the bulk oil's own peroxide value. In a softgel the shell limits oxygen transfer without stopping it, and it can carry moisture into the fill. The sibling CLA powder is a different system again: the oil is held in a starch matrix, so the drying step, the oil load and the seal on the pouch decide the rate. A bulk-oil stability file does not transfer to it, and its file does not transfer back. ## What moves the oil in storage What changes CLA oil during storage | Factor | Effect | Control | Oxygen | Raises peroxide value, then p-anisidine value | Nitrogen flush; low headspace; sealed pack | Light | Accelerates oxidation through clear glass or film | Amber bottle or opaque secondary pack | Heat | Raises the rate of oxidation and of hydrolysis | Cool store; short holds; no hot loading bay | Moisture | Drives hydrolysis and raises free fatty acid | Dry store; closed liner; ≤0.1% at release | Metal ions | Catalyse oxidation at trace levels | Stainless steel or glass contact; avoid iron and copper | Repeated opening | Replaces the headspace with air | Smaller packs; decant into a full container The factors reinforce one another. A warm, lit store holding a part-used drum is the hard case, and the useful question is not whether CLA oil is stable in the abstract but for how long, in which pack, under which condition. ## A stability protocol for the oil A usable protocol fixes four things: container, climate, sampling times and tests. A common design uses long-term storage at 25 °C/60% relative humidity, intermediate storage at 30 °C/65% relative humidity and accelerated storage at 40 °C/75% relative humidity. Add a light-exposure arm, because a dark incubator cannot reveal a photochemical failure. Test peroxide value, p-anisidine value, free fatty acid, moisture and appearance at every point, and run the full fatty-acid profile and the isomer split at the first and last points. The catalog sets no anisidine limit for the oil even though the powder specification carries one, so agree the line you want before the study starts rather than after the numbers arrive. If the oil goes into a softgel, a blend or an emulsion, study that matrix as well. Sampling has to be representative. A top-of-drum sample is not the same as one drawn after mixing, and a sample left open on the bench has already started to oxidise. Record how the sample was drawn, how it was held before the test, and how long it waited. ## What the finished formula does A softgel is the usual home for CLA oil. The shell is a barrier rather than a seal: gelatin and plant shells transmit some oxygen and moisture, and the seam is the weak point. Measure the fill at release and at the end of the study, and inspect the shell for discolouration, sticking and leakage. Blended with a more saturated oil the fill may oxidise more slowly than CLA alone, but not as slowly as the saturated oil, and the label declares the blend in descending order by weight. Any antioxidant is part of the specification. Mixed tocopherols, rosemary extract or another system should be named with its level, because it changes the label and the analytical result. An antioxidant slows oxidation; it does not reverse it. Adding tocopherol to an oil that already sits near the peroxide limit does not restore the specification, and deciding the antioxidant system after a failing result means another stability study. ## How the retest period is set No single shelf life applies to CLA oil, because the pack, the headspace and the storage condition decide it. A retest period has to rest on data from the same pack, and a number published without the pack and the condition is an assertion rather than a shelf life. Before any extension, the retained sample is re-tested at the end of the period. A bulk result does not transfer to a softgel or to a repacked bottle, and one customer's storage condition does not transfer to another's. The delivery documents should state the lot, the production date and the retest date, and the buyer should confirm the remaining life at delivery. The catalog specification is on the CLA oil product page, the release tests are described on the COA page, packs and lead time are on the MOQ page, the analytical methods are indexed under methods, and the retained-sample and release workflow is on the quality page. ### 04 CLA oil: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/fatty-acids/cla-oil/moq/ Reviewed: 2026-11-20 CLA oil starts at 1 kg in an amber bottle, and the production pack is a 25 kg HDPE drum; lead time for the standard pack is 1–7 days from order confirmation. A quotation becomes comparable only when it names the esterified form and the CAS number, the CLA range and isomer split, the pack and quantity, the destination and trade term, the papers, and the country where the finished product will be sold. In one lineOne kilogram in an amber bottle is the smallest unit we can draw from a released lot and keep traceable to a retained sample; the 25 kg drum is the same oil in a production pack. ## Why the floor is one kilogram The bottle is sized for three jobs at once: a bench trial, a retained sample and a check by an outside laboratory, all drawn from a single lot. A smaller quantity would have to be split out of a larger pack, and that split breaks the link between the oil, its lot code and the sample kept beside it. Nothing about the material improves in the process. Choosing between the bottle and the drum is a consumption-rate question as much as a volume one. CLA oil takes up oxygen at its surface, and every opening replaces part of the headspace with air. A drum drawn from weekly for a year is exposed far more than a bottle emptied in a month, so a slow line is often better served by bottles even though the drum means less handling per kilogram. The floor is a pack decision, not a volume target. ## Packs, headspace and the form CLA oil packs and what each one suits | Pack | Net weight | Barrier | What it suits | Amber glass bottle | 1 kg | Light-blocking glass; screw closure | Trial, sample, short production run | HDPE drum | 25 kg | Closed inner liner | Production with regular draws | Nitrogen-flushed drum | 25 kg | Inert headspace by agreement | Long hold before use | Powder on carrier | On request | Foil pouch | Dry blends and sticks; a different product The esterified form belongs in the same conversation. A triglyceride and a free-acid grade do not share a handling note, and a closure agreed for one is not automatically right for the other. If the line needs a particular liner, a nitrogen blanket or a defined headspace, raise it before the offer is written, because those requests move both the pack description and the dispatch window. ## Dispatch and the clock Order confirmation starts a 1–7 day clock for the standard pack: picking, paperwork and dispatch happen inside it. Transit, customs and the buyer's own release are not part of it, which is why a delivery date and a dispatch date are different promises. A non-standard pack, a nitrogen flush or an unusual quantity adds time, and the offer should carry that as its own line rather than hiding it inside the range. Ask for the dispatch date in writing. The bottle ships as a parcel, the drum as a pallet, and the trade term fixes which side arranges carriage and which side clears customs. The lot papers should travel in the same consignment as the oil: a drum that lands before its certificate cannot be released by the buyer's quality team, and the delay lands on the wrong party. ## What makes a quotation usable A quotation is comparable when it answers six questions: - What is the material? Conjugated linoleic acid oil, CAS 2420-56-6, with the esterified form written out. - Which limits apply? CLA range, isomer pair and split, free fatty acid, peroxide value and moisture. - How is it packed? 1 kg amber bottle, 25 kg HDPE drum, or a nitrogen-flushed or custom pack. - Where is it going? The country, the delivery point and the trade term. - Which papers come with it? The certificate, the specification, the safety data sheet and any declaration the importer needs. - What is it for? A supplement, a food or something else, and the country of sale. An offer that leaves out the form or the destination is not yet an offer. The same CLA figure can sit inside one market's file and outside another's, so the paperwork is part of what is being compared. Commercial terms are stated on the quotation rather than on this page. ## The bottle is a lot, not a demonstration Qualification starts with the bottle: run the fatty-acid profile and the isomer split, the CLA figure, peroxide value and free fatty acid, then keep back a retained sample from that bottle. The lot code on the oil, the certificate and the quotation should agree, and if nobody can tie the pack to a lot then the exercise was a demonstration. A trial below a kilogram is split out of a bulk lot. It gets its own handling record and its own lot code, and it cannot be presented later as the catalog bottle. Put the split in writing and keep the code with the trial results: the oil in the trial and the oil in the drum can be different lots even when the limits match. ## What to settle before the first order Four things belong in the quality agreement, next to the commercial terms: the specification revision and the pack, a certificate for every lot, the retained sample and its retest period, and the route for a change to feedstock, refinery step or pack. Agreeing those before production is easier than negotiating them once a consignment is on the water. A dispute is settled on the retained sample by a re-test both sides witness, run to the named method; a photograph of the drum proves nothing. Name the referee laboratory both sides will accept and say who pays for it in advance. A return argued from appearance alone is hard to defend, particularly in an oil where colour moves with refining and age. The catalog specification is on the CLA oil product page; the release lines are on the COA page; storage and oxidation are covered on the stability page; the powder pack is described on the CLA powder page; the methods are indexed under methods; and the release and retained-sample workflow is on the quality page. ### 05 The regulatory file for CLA oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/cla-oil/compliance/ Reviewed: 2026-11-20 A CLA oil regulatory file ties one specification to one destination. It carries the CLA figure and its basis, the isomer profile, the free fatty acid and peroxide values, the contaminant results, the intake arithmetic and the label name. The buyer's regulatory team confirms that route — the finished product, the dose and the local rules decide it — and this page sets out the papers and checks the folder should hold. In one lineThe regulatory file ties one lot of CLA oil to one destination: the CLA figure and its basis, the isomer profile, the oxidation values, the label name and the intake arithmetic all have to agree. ## What the file has to answer Four questions run through the file. Which material is it — the CLA range, the esterified form and the isomer split? Which lot does the certificate cover, and what did it measure? Does the intended use and daily intake fit the destination's route and limits? And how are a new feedstock, a new refinery step or a new pack handled when they arrive? Each document answers only part of that. A certificate speaks for one lot, a data sheet describes the material in general, and neither decides the market route. The intake calculation, the label review and the novel-food or dietary-ingredient check are separate tasks, each dated and versioned in the folder. ## European Union and the United Kingdom The EU review rests on three instruments: Regulation (EC) No 178/2002 for general food law, Regulation (EU) No 1169/2011 for consumer information, and Regulation (EU) 2023/915 for contaminant limits in force at the time of writing. A CLA-rich oil also raises the novel-food question under Regulation (EU) 2015/2283, and the answer depends on the use and the process. CLA-rich oils have been sold in food supplements in the Union since the 1990s, which is a starting point rather than an answer: an entry can be tied to a defined specification and to a maximum intake, and a food use outside supplements is a separate question. Check the current Union list and the novel-food catalogue against the material you buy, as of this review. Great Britain applies the retained framework with its own register and labelling, while Northern Ireland follows the EU rules, so the two do not share one file. The delivery address decides which set applies, and the buyer records that call with the order. Refined CLA oil brings the process contaminants into scope. 3-MCPD and its fatty acid esters, and glycidyl fatty acid esters, form during deodorisation, and the refinery should state its deodorisation route and supply results where the destination sets a level. A cold-pressed or unrefined route has a different profile but still needs the pesticide, PAH and mineral-oil statements the market requires. ## United States In the United States, CLA oil goes to market as a dietary ingredient, so the file depends on the basis the supplier asserts. The supplier states that basis and supplies the document behind it; the buyer checks that it reaches the finished product. The Federal Food, Drug, and Cosmetic Act, the labelling rules in 21 CFR 101 and the supplement cGMPs in 21 CFR 111 are the working references. The Supplement Facts panel declares conjugated linoleic acid by name with the amount per serving, and the ingredient statement lists the oil and any antioxidant. A structure or function statement needs the DSHEA disclaimer and must not be a disease claim. If the oil is used as a food ingredient rather than in a supplement, a different basis applies and it is checked separately; a supplement file does not carry across. ## Limits and the intake calculation The table is the starting point for the finished-product review. The current destination text and the daily intake decide the final limit, not the catalog specification alone. Limits to carry into the finished-product review · CLA oil | Parameter | Release target | What the file must show | Lead (Pb) | ≤3 mg/kg | Measured value, method and intake arithmetic | Arsenic (As) | ≤2 mg/kg | Lot value against the agreed target | Cadmium (Cd) | ≤1 mg/kg | Measured value; category exceptions noted | Mercury (Hg) | ≤0.1 mg/kg | Measured value with the method | Free fatty acid and peroxide value | ≤0.50% and ≤5.0 meq O₂/kg | Lot values plus the storage record | 3-MCPD and glycidyl esters | Destination limit | Refining record and results where a limit applies | Polycyclic aromatic hydrocarbons | Destination limit | Results against the current list | Mineral oil hydrocarbons | Customer specification | Screen result and limit of quantification Every result has to be converted to the daily intake of the finished product and compared with the destination rule. A heavy-metal panel catches neither the process-contaminant nor the oxidation question, and an oxidation result does not cover metals. The file needs both, and the calculation needs the inclusion rate, not the oil result alone. ## Label and claims The label names the material and the amount. In the EU the ingredient appears in the ingredients list, the nutrition declaration carries fat and saturates, and the CLA amount is stated per portion from the oil weight and the CLA figure. In the US the Supplement Facts panel names conjugated linoleic acid per serving. In both markets the CLA figure needs its basis: mass per serving, from the oil, on the fatty-acid basis the certificate uses. A claim is a separate review. In the EU, nutrition and health claims must be permitted under Regulation (EC) No 1924/2006 and, for health claims, must appear on the Register of authorised claims; the reviewer checks the current entry before the wording is used. A composition figure such as the CLA content is not by itself a claim. In the US a structure or function statement is the brand's responsibility, needs substantiation and the DSHEA disclaimer, and must not be a disease claim. No disease-related claim is made on this page. ## Documents in the file - Version-controlled specification with the CLA range, the esterified form and the isomer split. - Lot certificate with the methods, the results and the basis of the CLA figure. - Technical data sheet and safety data sheet. - Allergen, GMO and country-of-origin statements. - Isomerisation and refining record, including the deodorisation step. - Heavy-metal, process-contaminant, pesticide, PAH and mineral-oil statements as required. - Pack declaration, lot-code traceability and retained-sample record. ## Checklist before the first order - The CLA range, the esterified form, the isomer split and the specification version are fixed in writing. - COA, TDS, SDS, allergen, GMO and origin records are present and dated. - Each contaminant result has been recalculated at the finished-product inclusion rate. - The label name, the CLA basis and the claim wording have been reviewed for the destination. - The novel-food or dietary-ingredient route is recorded with the date it was checked. - Quotation, specification and certificate cite the same version. The catalog limits are on the CLA oil product page, the release lines are on the COA page, the identity tests are on the identity page, the powder is specified on the CLA powder page, market frameworks are summarised in the EU regulatory note, the analytical methods are indexed under methods, and release is described on the quality page. ### 06 How we prove a CLA oil lot is conjugated linoleic acid URL: https://nutrition.rainwoodbio.com/products/fatty-acids/cla-oil/identity/ Reviewed: 2026-11-20 A CLA oil lot is identified by the whole fatty-acid profile, the isomer pair and the esterified form together, not by the CLA figure alone. A concentrate can be diluted to hit a total, an incomplete reaction leaves the total in range with the wrong balance, and a free-acid oil reads like a triglyceride until the acid value is seen. The profile, the split, the form and the paper trail are the evidence, and they have to agree. In one lineIdentity is the whole fatty-acid profile plus the isomer pair and the form, because a CLA figure on its own can be assembled from a different isomer mix or a different feedstock. ## The four layers of identity The right name on a certificate does not prove the material. Each layer below settles something the others cannot; a supplier who stops at the first has described a document. Four layers of CLA oil identity | Layer | What it settles | Measurement | What it establishes | Paper | Is anything named, and at which range? | Product name, CAS 2420-56-6, CLA 70.0–80.0% | That a document exists, nothing more | Profile | Is this a conjugated C18:2 oil from a linoleic feedstock? | GC of fatty acid methyl esters | The family and the residual acids | Isomers | Which conjugated isomers, in what share? | GC with isomer resolution; silver-ion HPLC where needed | The isomer distribution | Form and balance | Esterified or free acid, diluted or not? | Acid value or free fatty acid, glycerol and sterol pattern | The form and the mass balance The order matters. The profile can be right while the isomer split is different, and the isomer split can be right while the oil has been extended with a cheaper fat. Only the fourth layer catches a change of form. ## The isomer ratio and the residual acids The catalog fixes the two named isomers at ≥90.0% of CLA and leaves the split between them to the certificate. A commercial concentrate made by alkali isomerisation usually returns the two in roughly equal share, while a more selective route can favour one of them. Neither is a defect, but a label that declares one isomer needs the measured split, because “90% of CLA” says nothing about which isomer the serving carries. The rest of the profile is the second marker. A CLA concentrate is not pure CLA: the balance is other fatty acids, mainly palmitic, stearic and oleic acid together with unreacted linoleic acid. Linoleic is the one to read closely, because it is the substrate. A high residual figure can mean an incomplete conversion, and a figure well below the rest of the profile can mean the concentrate has been blended with a cheaper oil and re-standardised. Markers to read together on a CLA oil certificate | Marker | What the catalog fixes | What a deviation suggests | CLA as fatty acids | 70.0–80.0% | Below range: dilution or incomplete conversion | cis-9,trans-11 + trans-10,cis-12 | ≥90.0% of CLA | Below range: other conjugated isomers present | Split between the two isomers | Reported, not fixed | A shift within range: different process or feedstock | Residual linoleic acid | Not fixed | High: incomplete reaction; very low: a blend | Palmitic, stearic, oleic acid | Not fixed | A profile that no longer matches the feedstock | Free fatty acid or acid value | ≤0.50% | High: the free-acid form, or hydrolysis The table is a reading aid, not a second specification: two lines are release limits and four are context, and the context is what makes a substitution visible. ## What X-ray diffraction can and cannot show X-ray diffraction identifies crystalline phases, and CLA oil is a liquid at room temperature with no lattice to diffract. A pattern run on the neat oil is therefore not an identity test: it says the sample was not crystalline, which is already known. The technique earns its place on the powder, where the starch carrier is crystalline enough to give a pattern, and there it describes the carrier rather than the oil. There is one troubleshooting use. A lot that throws a solid at low temperature can be examined to see what crystallised, which helps to separate a cold-storage effect from a foreign fat. That is an investigation, not a release test, and it does not measure the isomer ratio. Read an “XRD identity” line on an oil certificate as a statement about the wrong instrument unless it says which phase was measured. The XRD method note sets out the limits of the technique. ## The routes that matter CLA oil substitutions and the signals | Route | What it does | Signal | Check | Dilution with a cheaper oil | Lowers CLA per gram | CLA at the bottom of the range; profile reshaped | Full profile; sterol pattern | Different isomer mix | Total unchanged, distribution moved | Split shifts; label no longer matches | GC resolution; silver-ion HPLC | Incomplete conversion | CLA in range, linoleic high | Residual linoleic above the usual balance | Full profile | Free acid sold as triglyceride | Same CLA figure, different material | Free fatty acid or acid value high | Acid value; glycerol | Oxidised oil | CLA figure intact, quality gone | Peroxide value high; p-anisidine value rising | Oxidation panel The first three routes share a feature: the CLA figure can stay within the release range while the oil changes. That is why the profile and the split belong beside the total: a certificate with one number leaves the likely substitution untested. Oxidation is the opposite case: the identity is unchanged and the oil is still failing. ## What the identity specification should say - “Conjugated linoleic acid oil, CAS 2420-56-6, CLA 70.0–80.0% by GC of fatty acid methyl esters.” - “Esterified form stated: triglyceride or free fatty acid, with the acid value or free fatty acid limit.” - “cis-9,trans-11 and trans-10,cis-12 ≥90.0% of CLA, with the measured split reported.” - “Full fatty-acid profile reported, including residual linoleic, oleic, palmitic and stearic acid.” - “Peroxide value ≤5.0 meq O₂/kg; moisture ≤0.1%; appearance clear to slightly hazy.” - “No other vegetable oil added; feedstock and process named.” A specification that says only “CLA 80%” leaves the laboratory no way to check the isomers, the residual profile or the form. The certificate should repeat those lines and carry the lot code that matches the pack and the retained sample. ## Five questions for a supplier - Is the CLA esterified as a triglyceride or supplied as free fatty acids, and what is the acid value or free fatty acid result? - What are the cis-9,trans-11 and trans-10,cis-12 figures separately, and can you send the chromatogram? - What are the residual linoleic, oleic, palmitic and stearic figures on the same lot? - Which feedstock and which isomerisation and refining steps were used for this lot? - If the lot is disputed, who attends the re-test, and on which retained sample? Those five answers build an identity file. One CLA percentage does not. The catalog limits are on the CLA oil product page, the release lines are on the COA page, the grade axes are on the grades page, the powder is specified on the CLA powder page, the methods are indexed under methods, and the retained-sample workflow is on the quality page. ### 01 What the COA for evening primrose oil actually contains URL: https://nutrition.rainwoodbio.com/products/fatty-acids/evening-primrose-oil/coa/ Reviewed: 2026-11-20 The certificate for an evening primrose oil lot reports the fatty-acid profile by gas chromatography, the GLA, linoleic and oleic figures, free fatty acid, peroxide value, moisture and the heavy-metal and microbiology panels. Every line needs its method and its release limit, with the measured result in a separate column. The catalog ranges are the gate; the lot certificate shows where inside them the oil actually sits. In one lineA GLA figure alone does not describe the oil: the certificate has to place it inside the full fatty-acid profile and beside the free fatty acid and peroxide values for the same lot. ## The certificate as a lot report Evening primrose oil is a crop product, and the 8.0–11.0% GLA window is wide enough for two conforming lots to sit three percentage points apart. The certificate should report the whole profile, not only the headline acid, and tie the numbers to one lot code. Identity and the GLA figure answer different questions. Identity asks whether the fatty-acid pattern is consistent with Oenothera biennis seed oil; the GLA figure asks how much of one acid is present. A certificate that reports only GLA leaves the identity question open, because another GLA oil or a blend can be built to land inside the same range. Identity and fatty-acid profile · evening primrose oil | Parameter | Method | Release limit | Appearance | Visual | Clear to slightly hazy, pale yellow to golden | Identification | GC of fatty-acid methyl esters against a reference profile | Profile conforms | Gamma-linolenic acid (C18:3 n-6) | GC-FAME | 8.0–11.0% | Linoleic acid (C18:2 n-6) | GC-FAME | 65.0–75.0% | Oleic acid (C18:1 n-9) | GC-FAME | 8.0–15.0% The profile is the part a buyer can use. A blend can be pushed to the GLA figure while the linoleic and oleic fractions drift; matching two acids at once is harder than matching one. ## The GC basis: profile, GLA and the oil basis Fatty-acid results come from transesterification to methyl esters and capillary gas chromatography with flame-ionisation detection. The certificate should say whether the percentages are area per cent or weight per cent after response-factor correction, which column was used and which standard identified the peaks. The two bases diverge as the minor-peak load grows. The C18:3 position needs care. Gamma-linolenic acid (C18:3 n-6) and alpha-linolenic acid (C18:3 n-3) differ only in the position of one double bond, so a short or non-polar column can merge them into one peak. If the method cannot resolve the pair, the reported C18:3 figure may include alpha-linolenic acid and the GLA result will read high. Ask for the chromatogram, not just the integrated percentage. The oil basis is the second conversion. The catalog figure is 8.0–11.0% GLA on the oil itself. If the oil is later carried on a starch matrix, the figure on the powder is the oil figure multiplied by the oil load, and the certificate has to say which basis it reports. The evening primrose oil powder page sets out that arithmetic for the powder format. ## Release limit, result and the oxidation pair Free fatty acid and peroxide value are the lines most likely to move after release. Free fatty acid measures hydrolysis of the triglycerides, which rises with water and heat; peroxide value measures the primary products of oxidation, which rise early and can fall again as those products break down. The catalog sets free fatty acid at ≤0.50% and peroxide value at ≤5.0 meq O₂/kg. p-Anisidine value measures the secondary aldehydes that appear later; the catalog does not fix one for the oil, so agree it at order if the customer's shelf life is long. Oxidation, contaminants and release tests · evening primrose oil | Parameter | Method | Release limit | Free fatty acid (as oleic) | Titration | ≤0.50% | Peroxide value | Iodometric titration | ≤5.0 meq O₂/kg | p-Anisidine value | Spectrophotometric | Agreed at order | Moisture | Karl Fischer | ≤0.1% | Microbiology | Plate count and absence tests | Aerobic plate count ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg The result column needs a measured figure for each line: a number per element for heavy metals, not a total, and a count plus an absence statement for microbiology. A lot released near 5.0 meq O₂/kg is inside the gate and still different from one released near 1.0 for a softgel that will sit warm for two years. ## What moves between lots The seed lot, the growing season and the pressing temperature move the GLA inside the catalog range. Refining moves free fatty acid and colour much more than the fatty-acid profile, so a cold-pressed oil can sit near 0.4% free fatty acid and a refined oil from the same seed near 0.05%, both reporting a GLA figure inside the same window. The certificate records the values; the grade explains why they differ. Peroxide value varies most because it depends on seed condition, pressing temperature, pack headspace and time since production. A lot released near the limit leaves little room for a warm loading bay or a clear bottle on a lab bench. Colour tells the least. A fresh cold-pressed oil and a lightly refined one can both fall inside the pale yellow to golden window, so a darker sample should prompt a storage question instead of an automatic rejection. A trend says more than one result near an edge: GLA drifting low, peroxide value climbing, or free fatty acid rising in a grade that should be stable. The lot code on the certificate should match the bottle, the drum and the retained sample, or the trend belongs to another material. ## When to order an outside test An independent test is worth ordering when the source is new, when the lot is the first into a regulated market, when the GLA figure is disputed, when a blend is suspected, or when the oil has been held past its retest date. The panel is targeted rather than a full repeat: GC-FAME with the chromatogram and the complete profile, free fatty acid, peroxide and p-anisidine values, a sterol profile where a blend is suspected, heavy metals and microbiology. Request the quantification limit behind each screen, and use a laboratory whose ISO/IEC 17025 scope covers the tests. Keep the chain of custody intact: the referee should test the retained sample, the report should carry the lot code, and the supplier's certificate and specification should travel with the sample so the methods can be compared. ## What to compare between suppliers Six lines make two offers comparable: the species and pressing route; the GLA figure with its basis; the complete fatty-acid profile; free fatty acid, peroxide and p-anisidine values; the sterol statement where a blend is suspected; and the pack with its lot traceability. An offer that matches the GLA but not the linoleic or oleic figure describes a different oil. The catalog limits are on the evening primrose oil product page. The test terms are defined in the COA glossary entry, the method library is indexed under analytical methods, the grade differences are on the grades page, the source evidence is on the identity page, and lot release is described on the quality page. ### 02 Evening primrose oil grades: cold-pressed, refined and concentrated URL: https://nutrition.rainwoodbio.com/products/fatty-acids/evening-primrose-oil/grades/ Reviewed: 2026-11-20 Evening primrose oil is graded by the process it has been through, not only by its GLA figure. Cold-pressed oil keeps the seed's colour, odour and native tocopherols; refined oil is lighter, lower in free fatty acid and more consistent in appearance; a concentrated oil lifts the GLA above the 8–11% range by a physical separation step. The catalog item here is the cold-pressed oil, and the other grades are separate specifications rather than upgrades. In one lineThe grade of an evening primrose oil is set by how the seed was pressed and how the crude oil was finished, so colour, free fatty acid and the certificate change even when the GLA range does not. ## Why the process is the grade GLA comes from the seed, but the oil around it is changed by the way the seed is pressed and the way the crude oil is finished. A cold-pressed oil is produced by mechanical pressing at a controlled temperature, without a solvent extraction step. It keeps more of the seed's minor components, so the colour is deeper and the odour stronger than a refined oil's. Refining is a sequence: degumming, neutralisation, bleaching and deodorisation. Each step removes something. Free fatty acid falls, colour and odour are reduced, and the waxes and gums that make a cold-pressed oil hazy are taken out. Some tocopherols and sterols go with them, so a refined oil is not automatically the more stable one; it is the more consistent one. A concentrated oil is a different operation again. The GLA fraction is raised by a physical separation step, and the resulting oil is specified on its own GLA figure rather than on the 8–11% range. It is a different raw material with a different label calculation. ## The grades side by side Process grades of evening primrose oil, with the catalog item in the first column | Property | Cold-pressed | Refined | Concentrated | Process | Mechanical pressing, no solvent | Degumming, neutralisation, bleaching, deodorisation | Physical separation to raise the GLA fraction | GLA on the oil | 8.0–11.0% (catalog) | 8.0–11.0% | Above the catalog range; stated in the specification | Free fatty acid | Up to 0.50% (catalog) | Usually below 0.10% | Set by the specification | Colour and odour | Pale yellow to golden; characteristic seed odour | Lighter and milder | Follows the feedstock and the separation | Native tocopherols | Largely retained | Partly reduced by deodorisation | Depends on the process | Typical use | Softgels and oil blends that name a cold-pressed oil | Softgels where colour and taste are tight | Formulas that need a smaller oil weight per GLA figure | Label name | Oenothera biennis oil | Oenothera biennis oil | The concentrate's own name and specification The table is a comparison of process routes, not a ranking. A refined oil suits a softgel fill that has to be pale and mild; a cold-pressed oil suits a label and a customer specification that name that route. The concentrated oil is a separate purchase with its own GLA figure and label arithmetic. ## Colour, haze, flow and the softgel The catalog appearance is clear to slightly hazy, pale yellow to golden. A cold-pressed oil can throw a sediment on standing, and a haze can appear when the bottle is stored cool; both are physical. The fill line still has to deal with them: a softgel fill is usually filtered, and a hazy oil can blind a filter or leave a deposit in the holding tank. Viscosity is low at room temperature, and the oil flows readily. That makes it easy to pump and fill, and a leak in a softgel seam shows up quickly. The oil is insoluble in water and soluble in fats and organic solvents, so a water-based cleanup is the wrong approach on the fill line. Colour is a weak specification line. Two cold-pressed lots can differ visibly and both be inside the catalog window; a refined lot is expected to be lighter. ## The GLA figure behind the label At 8.0–11.0% GLA on the oil, one gram of oil carries 80–110 mg of GLA. A 500 mg softgel therefore carries 40–55 mg and a 1,000 mg softgel carries 80–110 mg, before any overage or filler. To declare 100 mg of GLA per serving, the formulator needs 0.9–1.25 g of oil, which sets the capsule size or the number of capsules per serving. A concentrated oil changes that arithmetic in proportion: the oil weight for a fixed GLA figure falls as the GLA fraction rises. The label logic does not change: the declared GLA per serving is still the oil weight multiplied by the GLA on the oil, and the certificate still has to state the basis. The ingredient name and the specification do change. A refined oil keeps the same GLA range, so the capsule weight for a given GLA figure does not move when a cold-pressed oil is replaced by a refined one. The free fatty acid, colour and odour move instead. ## Writing the grade into the specification Start with the species and the process: “Evening primrose (Oenothera biennis) seed oil, cold-pressed.” Then set the GLA range and state the basis: on the oil. Add the linoleic and oleic ranges, free fatty acid, peroxide value, the heavy-metal and microbiology panels, moisture and the pack. Add the p-anisidine value if the customer's shelf life is long, and state the sterol profile if a blend is a concern. A specification that says “evening primrose oil 10% GLA” names a figure without a process, and a specification that says “cold-pressed” without the profile names a process without a measurement. The grade belongs in the product name and in the specification revision, not only in a marketing line. For the concentrated grade, the GLA range, the process and the label name all change together. Handle it as a new specification with a new certificate, not as the same oil at a higher figure. ## When not to switch grade Do not switch from cold-pressed to refined if the label, the customer specification or the market file names a cold-pressed oil. The GLA figure may be identical and the ingredient declaration may look the same, but the process claim on the pack is no longer supported. Do not switch to solve an oxidation problem either: refining lowers free fatty acid and some colour, but the peroxide value is set by the seed, the pressing, the storage and the pack, and a refined oil in a clear bottle can still fail. Do not switch to a concentrate to fit a smaller capsule without rebuilding the label and the specification. The GLA per gram changes, the oil weight per serving changes and the ingredient name may change. A concentrate is the right answer when the formula genuinely needs it, not when a smaller oil load could solve a capsule-size problem. The cold-pressed specification is on the evening primrose oil product page; the COA page explains the certificate lines, the stability page covers oxidation, the level-four comparison takes the oil-versus-powder question, the powder page covers the powder format, the methods are indexed under analytical methods, and lot release is on the quality page. ### 03 Evening primrose oil stability: oxygen, light and the pack URL: https://nutrition.rainwoodbio.com/products/fatty-acids/evening-primrose-oil/stability/ Reviewed: 2026-11-20 Evening primrose oil is a highly unsaturated oil: linoleic acid carries two double bonds and GLA carries three, and oxygen attacks those bonds before the GLA figure moves. The sealed amber bottle or HDPE drum, the headspace above the oil and the storage temperature set the rate. Peroxide value is the line that shows the change first, and free fatty acid follows when water and heat are present. In one lineEvening primrose oil fails through oxidation rather than through a loss of GLA, so the peroxide value, the free fatty acid and the pack decide how long the oil stays inside its specification. ## The oil in its sealed pack The standard pack is a 1 kg amber bottle and a 25 kg HDPE drum. The amber glass is the light barrier; the closure and the headspace are the variables that matter once the bottle is open. A full, sealed bottle has little oxygen above the oil. A half-used bottle has a large air space and an oil film on the glass, and both speed the reaction. Moisture is a smaller line for an oil than for a powder, but it is not irrelevant. The catalog limit is ≤0.1%, and water in the oil supports hydrolysis, which raises free fatty acid and can make the oil cloudy. Keep the pack closed and dry, and do not store it next to a steam line or in a room where the temperature swings through the dew point. Ask whether the drum is nitrogen-flushed and what the headspace is. A nitrogen blanket is not implied by the standard pack, and it changes the oxidation history of the lot without changing the certificate. If the oil will be held for a long period, a smaller pack or a blanketed drum is a better storage decision than a large drum opened repeatedly. ## Emulsion, blend and the softgel fill Evening primrose oil does not dissolve in water. In a softgel it is the fill, with no water phase and no emulsifier; the shell is the barrier. In an oil blend it is diluted by other oils, which lowers the GLA per gram and changes the oxidation mix. In a beverage it has to be emulsified, and the oil–water interface, the dissolved oxygen and the process heat are added stresses that the neat oil never sees. The softgel is the more protected format, not a guarantee. A clear shell passes light; an opaque or coloured shell reduces it. The seam is the weak point, and a leaker exposes the fill to air. For an emulsion, the droplet size, the emulsifier and the homogenisation step decide how much oil surface is exposed, and the finished drink has to be tested as a drink. The powder format sits between the two: the oil is dispersed in a starch matrix, which slows the contact with oxygen but does not seal the oil away. The principles are the same, and the evening primrose oil powder page covers the matrix-specific limits. ## What drives oxidation Factors that move evening primrose oil during storage | Factor | What it does | Control | Oxygen | Hydroperoxides form at the double bonds | Low headspace; sealed pack; nitrogen where specified | Light | Photo-oxidation; colour and odour change | Amber bottle; opaque drum; dark store | Heat | Faster oxidation and hydrolysis | Cool store; controlled process temperature | Water | Hydrolysis raises free fatty acid | ≤0.1% moisture; dry store; closed pack | Trace metals | Iron and copper ions accelerate the reaction | Metal limits; equipment control | Antioxidant depletion | Tocopherols are consumed as the oil ages | Fresh oil; antioxidant declared where used These factors act together. A warm, bright store with a half-empty bottle is worse than any one of them, and an oil that passes the release limit can fail within months in that combination. The useful question is not whether evening primrose oil is stable, but how long it stays inside its limits in a named pack at a named condition. ## A stability protocol for the oil A stability file usually has two arms. The accelerated arm holds the pack at 40 °C and 75% relative humidity for six months and samples it at 0, 1, 2, 3 and 6 months. The real-time arm follows the market storage condition, often 25 °C and 60% relative humidity, and samples at 0, 3, 6, 12, 18 and 24 months. A light-exposure arm covers the failure mode that a dark incubator misses. At each point, test peroxide value, p-anisidine value, free fatty acid, GLA, appearance and moisture. Peroxide and p-anisidine values move first; GLA is usually the last line to change. Add microbiology where the pack or the process allows water in, and add the sterol profile only if a blend is suspected. Test the market pack, not a laboratory beaker. A 1 kg amber bottle and a 25 kg HDPE drum have different headspace-to-volume ratios and different opening histories, so the data belongs to the pack that will ship. If the oil is filled into softgels, test the softgel as well; the shell, the seam and the fill weight are part of the system. ## The finished formula changes the answer A softgel shell is a barrier against oxygen and, if it is opaque, against light. The plasticiser and the shell thickness change the transmission rate, and a clear shell in a transparent blister is a different exposure from an opaque bottle. A chewable or a fortified food brings the oil into contact with other ingredients, heat and air during processing, and an emulsified drink adds water, pH and shear. An antioxidant slows the reaction without stopping it, and it never substitutes for a proper barrier. If the oil carries tocopherols, ascorbyl palmitate or rosemary extract, the specification should name the substance and its level, and the ingredient list must disclose it. An overage does not repair an oxidised lot either: blending fresh oil into an aged one lifts the GLA figure but leaves the peroxides in place. The formula also decides which line fails first. In a softgel, a seam leak shows as a peroxide rise; in an emulsion, a painty or cardboard note is an early signal; in a blend, the dilution can hide a rising peroxide value per gram of oil. Test the finished format against its own limits, not only the bulk oil against the catalog. ## How the shelf life is set Evening primrose oil does not have one shelf life. The figure written into the specification is a retest period for a named pack, and it rests on stability data generated in that pack; a bottle and a drum cannot share a number just because they hold the same oil. When the retest period ends, the retained sample is re-assayed before any extension. An extension is a data decision, not a calendar decision, and a bulk result does not follow the oil into a repacked bottle or a softgel. The catalog limits are on the evening primrose oil product page; the certificate lines are on the COA page; the pack and lead time are on the MOQ page; the chromatographic and elemental methods are indexed under analytical methods; lot release is described on the quality page. ### 04 Evening primrose oil: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/fatty-acids/evening-primrose-oil/moq/ Reviewed: 2026-11-20 Evening primrose oil is stocked from 1 kg in an amber bottle, with a 25 kg HDPE drum as the bulk pack. Orders for the standard pack ship in 1–7 days. To quote firmly, we need six details: species and process, the GLA range and its basis, quantity and pack, destination and Incoterm, documents, and the use and market. In one lineOne kilogram is the trial unit because it can be sampled, tested and traced to a lot; the 25 kg HDPE drum is the production pack, and the offer is written against the specification. ## Why the minimum is 1 kg A kilogram covers a bench trial, a retained sample and an independent identity test, and it is small enough to ship as a parcel. It is also a pack with a lot code, a certificate and a retained sample, so the material on the bench and the material in the drum can be traced to the same lot. A smaller quantity would be a repack from a larger pack, with a second handling record and no original pack identity. The 25 kg drum is the production unit. It reduces handling per kilogram, but it commits inventory and a longer storage period, and it is opened repeatedly once production starts. The MOQ is a pack decision, not a volume incentive: the right pack is the one the project can use inside the oil's retest period. The two packs hold the same oil against the same specification. The difference is the barrier, the headspace and the opening history, which is why a stability file for one pack does not automatically support the other. ## Packs and formats Standard evening primrose oil packs | Pack | Net weight | Typical use | Notes | Amber glass bottle | 1 kg | Trial, sample, small batch | Light barrier; keep the closure tight and the headspace low | HDPE drum | 25 kg | Production | Ask about the inner liner and whether the drum is nitrogen-flushed The pack is part of the specification, not a detail after it. The amber bottle protects the oil from light, but a clear bottle would not, and the HDPE drum relies on its wall, its closure and its liner for the same job. A drum that is opened every week is a different storage case from one that is emptied in a single production run. If the oil is to be repacked, use a light-resistant, food-grade container that closes tightly, keep the lot identity and record the opening date. A repack is a new pack with a new headspace, and the stability data behind the original pack does not transfer automatically. ## Lead time and dispatch Orders for the standard pack are quoted at 1–7 days after confirmation. The clock covers the warehouse steps — picking, packing and preparing the lot documents — and stops at dispatch; freight transit, customs and the customer's own release sit outside it. A custom pack, a blend or a specification change runs on its own schedule, which the quotation should show as a separate line. Ask for the dispatch date, not only the range. A 1 kg bottle usually moves as a parcel and a 25 kg drum on a pallet; the Incoterm decides who books the freight and who clears entry. Lot documents should be in the same shipment as the pack, not sent after it. ## What a quotation needs Six items make a quotation firm enough to compare: - Product and process. Evening primrose (Oenothera biennis) seed oil, cold-pressed, with the grade named. - Specification. GLA range and basis, linoleic and oleic ranges, free fatty acid, peroxide value, moisture, heavy metals and microbiology. - Quantity and pack. 1 kg amber bottle, 25 kg HDPE drum, or a named alternative. - Destination and Incoterm. Country, delivery point and the trade term that governs freight and risk. - Documents. The lot COA, the specification, the SDS and any declaration the importer must file. - Intended use and market. Softgel, oil blend or another application, plus the country of sale. An inquiry that says only “evening primrose oil” will produce offers that cannot be compared, because the GLA basis, the process and the pack are all open. State the six items and the offer can be checked against the specification line by line. Commercial terms are stated on the quotation, not on this page. ## The sample is a lot, not a demonstration The 1 kg bottle is the qualification sample. Test identity, the full fatty-acid profile, free fatty acid, peroxide value and microbiology before scaling, and keep a retained sample from the same bottle. The sample lot code, the COA and the quotation should refer to one lot; material that cannot be tied to a lot is a demonstration, not a qualification. Check the things the certificate cannot show: colour, odour, haze and how the oil behaves in the intended fill. A cold-pressed oil can carry a sediment that settles in the bottle; a softgel line may need a filter, and the sample should show whether that is a problem. An approval given on one lot does not transfer to the next shipment; a different lot starts its own COA review. ## Terms to settle before the first order One page should carry both the commercial offer and the quality terms: Incoterm, pack, dispatch window, specification revision, lot COA, retained sample, retest period and change control. Settle those before the first production order; the same conversation is harder after a dispute. Acceptance terms should fix the remedy for a failed lot: a joint re-test against the named method, replacement or return. Allow enough time after delivery to complete the receiving tests before the claim window closes, and check that the shelf life at shipment leaves room for the customer's own. A change of species, process, GLA range or pack is a change-control event, not a purchasing substitution. The catalog limits are on the evening primrose oil product page. The release tests are on the COA page, the oxidation rules are on the stability page, the powder format is on the evening primrose oil powder page, the chromatographic methods are indexed under analytical methods, the glossary defines MOQ and lead time, and the release workflow is described on the quality page. ### 05 The regulatory file for evening primrose oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/evening-primrose-oil/compliance/ Reviewed: 2026-11-20 Evening primrose oil is an established food-supplement ingredient in the EU, the United States and the United Kingdom, and the oil itself is the simple part of the file. What each market still has to prove is the route, the contaminant result at the finished dose, the label and the claim. The buyer's regulatory team confirms the route for the destination; this page lists the parts of the file that belong beside the specification. In one lineThe oil has a history of use, but each market still asks four separate questions: permission, contaminant limits, label wording and claim support. ## Four checks, not one A regulatory file answers four questions that are independent of each other. Is the ingredient permitted in the category? Do the contaminants meet the limit at the finished dose? Does the label name the oil and every other ingredient in the product? Is the claim authorised, or at least defensible, in that market? The ingredient question is usually the easy one for this oil. The other three still need work: the contaminant limit applies to the softgel or blend as sold, the label declares the oil and the shell ingredients, and the claim must sit inside the authorised list. The specification describes the material; the regulatory file shows how it reaches the market. ## The European Union Directive 2002/46/EC sets the framework for food supplements. It harmonises the vitamin and mineral lists only; other substances, including evening primrose oil, are left to national rules, so the member state of sale matters. Evening primrose oil was in food-supplement use before 15 May 1997 and is not a novel food on that basis. Check the current novel-food catalogue for any new extraction or concentration step, because a process change can alter the answer. Safety rests on Regulation (EC) No 178/2002. The label is governed by Regulation (EU) No 1169/2011, which covers the ingredient list and the allergen statement, while contaminant limits come from Regulation (EU) 2023/915 and claim wording from Regulation (EC) No 1924/2006. For a softgel, the shell ingredients are part of the finished product and must be permitted and declared alongside the oil. The United Kingdom is not one file. Great Britain applies the retained framework and the GB novel-foods register; Northern Ireland follows the EU regime. The delivery address decides which set applies; record that decision with the order. ## The United States In the United States, evening primrose oil is sold as a dietary ingredient under DSHEA. The finished product is made under the supplement GMPs of 21 CFR 111 and labelled under 21 CFR 101; the firm, not the supplier, is answerable for both. A dietary ingredient introduced after 15 October 1994 carries a 75-day notification duty unless its pre-1994 history takes it out of that class; evening primrose oil has a long US supplement record, and the supplier should name its basis. FALCPA's major-allergen list — milk, egg, fish, crustacean shellfish, tree nuts, wheat, peanuts, soybeans and sesame — does not include evening primrose. The oil is still a botanical ingredient and the shell a food ingredient, so the label names both. California's Proposition 65 is a warning law rather than a specification limit; a lead result near the ceiling is a reason to check it. ## Contaminants and the finished dose The contaminant limits apply to the product as sold, not to the drum. The oil's contribution is the limit multiplied by its use level, and the rest of the formula adds to it, so calculate on the finished softgel or blend. The table places the catalog limits beside the EU ceilings in force at this review. Release limits and EU supplement ceilings · evening primrose oil | Parameter | EU supplement ceiling | Release limit | Lead (Pb) | 3.0 mg/kg | ≤3 mg/kg | Cadmium (Cd) | 1.0 mg/kg | ≤1 mg/kg | Mercury (Hg) | 0.10 mg/kg | ≤0.1 mg/kg | Arsenic (As) | No harmonised maximum | ≤2 mg/kg | Peroxide value | Not a regulatory maximum | ≤5.0 meq O₂/kg | Free fatty acid | Not a regulatory maximum | ≤0.50% | Microbiology | Set by the specification | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent The EU ceilings are those of Regulation (EU) 2023/915; arsenic has no harmonised maximum for supplements, so a national or customer limit applies. Peroxide value and free fatty acid describe oil quality, not contamination. They have no EU ceiling, so they sit on the certificate and in the stability file as agreed limits; a customer is free to set a tighter number. The microbial criteria are usually the customer's or the member state's, so confirm them. ## The claim boundary Health claims in the EU and the UK fall under Regulation 1924/2006 and, in Great Britain, the GB register. Only permitted wording may appear, and a footnote cannot make an unlisted statement acceptable. As of this review, no authorised claim covers evening primrose oil or GLA; because GLA has no NRV, even a “source of GLA” line needs a legal opinion. In the US, a dietary supplement may make a structure/function statement when the DSHEA disclaimer accompanies it. Anything that names a disease or a disease-related condition moves the product into drug territory unless a qualified health claim is authorised. The test is the wording on the finished label, not the specification or the certificate. Across all three markets, the safe ground is the material: how it is made, tested and certified. Disease copy stays out. This site publishes the specification and makes no health claim. ## The file a buyer should hold Documents behind an evening primrose oil food-supplement file | Document | What it proves | Common gap | Specification | Species, process, GLA basis, limits, methods | GLA with no basis | Batch COA | The measured results against the release gates | A result column that copies the specification | Source and allergen statement | The botanical source and the allergen status | A generic statement with no lot | EU route note | The pre-1997 use or novel-food position | A generic “EU compliant” line | US ingredient note | The dietary-ingredient and NDI position | No evidence of pre-1994 use | Contaminant and micro data | The lot meets the agreed limits | Numbers without methods or limits of quantification | SDS and stability data | Handling, storage and retest period | A shelf life without data ## The compliance checklist - Name the species and the process; confirm the GLA basis. - Fix the route for the destination: EU history-of-use or novel-food position, US dietary-ingredient basis, or UK retained rules. - Run the lead, cadmium, mercury, arsenic and microbiology results against the finished-product limits. - Tie the allergen statement to the botanical source and the softgel shell. - Check the label: ingredient names, net quantity, storage condition and the full ingredient list. - Keep claims to the authorised list and out of disease language. - Keep the specification, COA, SDS, stability file and route notes together and dated. The catalog limits are on the evening primrose oil product page. The certificate lines are on the COA page, the source evidence is on the identity page, the powder route is on the evening primrose oil powder page, and the market frameworks are set out on the EU, US and UK regulatory pages. The analytical methods are indexed under analytical methods, and the release file is described on the quality page. ### 06 How we prove a lot is evening primrose oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/evening-primrose-oil/identity/ Reviewed: 2026-11-20 Evening primrose oil is identified by the shape of its fatty-acid profile, not by the GLA figure on its own. The oil is linoleic-rich, with linoleic at 65.0–75.0% and GLA at 8.0–11.0%, a ratio near seven to one; borage and blackcurrant oils sit at different ratios and carry different minor acids. A lot is the named oil when the profile, the sterol pattern and the oxidation values agree with the source and belong to the same lot. In one lineIdentity is the full fatty-acid profile agreeing with the source, the linoleic-to-GLA ratio sitting where evening primrose puts it, and the oxidation values belonging to the same lot. ## The identity layers Identity is a chain of agreeing measurements, and each layer answers a different question. The document names the species and the process; the physical check covers colour, odour and clarity; the chromatogram shows the fatty-acid pattern; the sterol profile catches a blend that the fatty acids alone might miss; the oxidation values show whether the oil is fresh. No single layer is sufficient, and a certificate that reports one of them has not proved the oil. Identity layers for evening primrose oil | Layer | Question | Test | What it proves | Document | Is the species and process named? | Name, CAS number, specification | Paperwork only | Physical | Does it look and smell like the oil? | Appearance, colour, odour, clarity | A first screen, not a proof | Fatty acids | Is the profile evening primrose? | GC-FAME with the full profile | The oil type, not the species alone | Sterols | Is it a blend or a single oil? | Sterol profile by GC | Consistency with the source | Oxidation | Is it fresh? | Peroxide and p-anisidine values | The state of the lot ## The linoleic-to-GLA ratio and the full profile Evening primrose oil is about seven parts linoleic to one part GLA: at the catalog midpoints, roughly 70% linoleic against 9.5% GLA. Borage sits nearer two to one and blackcurrant nearer two and a half to one; blackcurrant also brings alpha-linolenic and stearidonic acids that evening primrose carries only at trace level. The ratio is harder to reproduce than the GLA figure, because a diluent moves the other acids at the same time. Fatty-acid markers for evening primrose, borage and blackcurrant oils | Marker | Evening primrose | Borage | Blackcurrant | GLA | 8.0–11.0% (catalog) | 18–23% | 14–19% | Linoleic | 65.0–75.0% (catalog) | 35–40% | 40–45% | Alpha-linolenic | Low | Low | 12–14% | Stearidonic | Trace | Trace | 2–4% | Oleic | 8.0–15.0% (catalog) | 15–20% | 10–13% The borage and blackcurrant figures are typical ranges, not catalog specifications; the certificate should carry the measured profile for the lot. For evening primrose, the catalog ranges are the gate, and a result near either end of the linoleic window is still the same oil. The profile is read as a pattern, not as a single line. ## What X-ray diffraction cannot do for an oil An oil is a liquid at room temperature. It has no crystal lattice to diffract, so an X-ray diffraction pattern cannot identify evening primrose oil and cannot measure its GLA. The method belongs to the solid state: it can show that a crystalline phase is present or absent, and it can compare a powder's carrier with a reference, but it cannot answer the oil's source question. This matters when a certificate offers “XRD identity” for an oil. Ask which phase the method measured and which reference it used. If the answer is the carrier or the capsule shell, the line is a solid-state check, not an oil identity check. If the answer is the oil, the method is being asked to do something it cannot do. The oil identity belongs in the GC section, where the fatty-acid profile is measured. ## What adulteration looks like Four routes are worth testing. A different GLA oil or a blend can be used to hit the GLA range; the oil can be cut with sunflower or soy; a GLA concentrate can be added to a low-GLA base; and an aged oil can pass the fatty-acid assay while its oxidation values climb. The checks follow the routes, and no single one covers them all. Routes of substitution and how they show up | Route | Effect on the oil | Signal | Test | Borage or blackcurrant oil | Lifts GLA and changes the surrounding acids | Ratio shift; new minor acids | Full GC profile | Sunflower or soy dilution | Lowers GLA and changes linoleic or oleic | Profile drift; sterol change | GC profile; sterols | Added GLA concentrate | Hits the GLA figure from a cheaper base | Minor acids and sterols of the base oil | Sterol profile; full GC | Oxidised oil | GLA stays in range while quality falls | PV and p-AV rise; odour change | Peroxide and p-anisidine values Colour and odour are the weakest signals, because a fresh cold-pressed oil and a lightly refined one can both be pale yellow, and a strong seed odour is normal. The stronger evidence is the profile plus the sterols plus the oxidation values. A certificate that reports appearance, GLA and nothing else has left the likely substitutions untested. ## Writing identity into the specification - “Evening primrose (Oenothera biennis) seed oil, CAS 90028-66-3, cold-pressed.” - “GLA 8.0–11.0% and linoleic 65.0–75.0% by GC-FAME, with the full profile reported.” - “Oleic 8.0–15.0%; the C18:3 peak resolved from alpha-linolenic acid.” - “Free fatty acid ≤0.50%; peroxide value ≤5.0 meq O₂/kg; moisture ≤0.1%.” - “Sterol profile on request; lot code on the certificate, the pack and the retained sample.” - “Species and process named; no substitution without written change control.” A specification that says “evening primrose oil 10% GLA” names neither the species nor the profile, and a specification that names the species without the profile gives the laboratory no way to check it. The two belong together, and the certificate should repeat both for the lot. ## Five questions for a supplier - Is the oil single-source Oenothera biennis, and which plant part and process are named? - What are the GLA, linoleic and oleic figures on the same lot, and what is the GC basis? - Can you send the chromatogram, with the GLA peak resolved from alpha-linolenic acid? - What are the peroxide and p-anisidine values, with methods, and how was the oil stored before packing? - Can you provide a sterol profile and the COA for the lot that will ship, not only a specification sheet? Five direct answers amount to an identity file; one GLA percentage does not. Catalog limits sit on the evening primrose oil product page; certificate lines are on the COA page, process grades on the grades page, the powder format on the evening primrose oil powder page, the analytical methods under analytical methods, and the release workflow on the quality page. ### 02.1 Evening primrose oil vs powder: carrier, GLA dose and label URL: https://nutrition.rainwoodbio.com/products/fatty-acids/evening-primrose-oil/grades/evening-primrose-oil-vs-evening-primrose-oil-powder/ Reviewed: 2026-11-20 Evening primrose oil is the oil itself, with 8.0–11.0% GLA on the oil. Evening primrose oil powder is that oil carried on a starch matrix, typically at a 40% oil load, so one gram of powder carries 0.4 g of oil, or 3.2–4.4% GLA by weight. The oil is the same; the carrier changes the weight behind the label, the flow on the line and the ingredient list. In one lineThe oil and the powder carry the same GLA in the oil; the carrier changes the weight behind the label, the flow in the line and the words on the ingredient list. ## What the carrier adds, and what it does not The oil format is 100% oil. The powder is an emulsion of the oil in a carrier, usually modified starch, that is dried and milled. At a 40% oil load, 60% of the powder is carrier, which is why the two formats cannot be substituted gram for gram. The carrier is a food ingredient in its own right and must be permitted and declared in the destination market. It does not change the oil inside. GLA is still measured on the extracted oil, and the powder's GLA is that figure multiplied by the oil load. A supplier who quotes “10% GLA powder” without saying whether the figure is on the oil or on the powder leaves the reader to guess; at a 40% load the two readings differ by a factor of 2.5. The powder is dispersible in water, not soluble: the starch hydrates and releases oil droplets, while the oil itself stays hydrophobic. ## The GLA dose arithmetic Label arithmetic is a multiplication, not a recommendation. One gram of oil at 8.0–11.0% GLA carries 80–110 mg; one gram of 40% powder from the same oil carries 32–44 mg. To declare 100 mg of GLA per serving, the formulator needs 0.9–1.25 g of oil or 2.3–3.1 g of powder. Material weight for a 100 mg GLA serving | Format | GLA per gram | Material for 100 mg GLA | Typical unit | Evening primrose oil | 80–110 mg | 0.9–1.25 g | A 1,000 mg softgel carries 80–110 mg GLA | 40% oil powder | 32–44 mg | 2.3–3.1 g | A 3 g stick carries 96–132 mg GLA The unit column is where the decision becomes practical. A softgel can hold a gram of oil; a capsule cannot hold 3 g of powder, so a 100 mg GLA figure in a capsule points to the oil, a higher oil load or a different serving size. A stick can hold 3 g of powder, which is why the powder is the usual choice for a dry mix. ## What the label must say The oil is declared as Oenothera biennis oil, or “evening primrose oil”, in the ingredient list. The powder adds the carrier: modified starch is declared in the ingredient list, and any antioxidant is declared as well. The capsule shell is a separate set of ingredients. None of these is optional because the format changed. “40% oil powder” is an oil load, not a GLA figure. The label states the GLA per serving, and the panel makes clear what the serving weight refers to. A claim that the powder is “evening primrose oil” without naming the carrier describes half the product. In the EU, GLA has no NRV, so a “source of GLA” statement needs a legal check; in the US, the Supplement Facts panel names the ingredient and the amount per serving. ## Flow, taste and the line The oil is a low-viscosity liquid: pumped, filtered and filled into softgels or blended with other oils, with no carrier and no dust. The powder is free-flowing and metered by weight into sticks, sachets, capsules or tablets; it disperses in water and can be flavoured, which helps with the oil's characteristic taste. The powder can segregate in a dry blend if its particle size differs from the other ingredients, and it can cake if moisture enters the pack. The oil can separate in an emulsion and can migrate into a capsule shell. Both need a process trial on the format that will be sold, not on the bulk material alone. ## Oxidation is measured differently in each format The oil's catalog limits are peroxide value ≤5.0 meq O₂/kg and free fatty acid ≤0.50%. The powder's limits are peroxide value ≤8.0 meq/kg and p-anisidine value ≤20.0, with moisture ≤4.5%. The numbers differ because the materials differ: the powder's oxidation values are measured on the extracted oil, and the matrix adds a moisture specification the oil does not need. The carrier slows the oil's contact with oxygen and light; it does not seal it away. The powder has a large, porous surface area, while the oil has a small surface-to-volume ratio in a sealed bottle but a large one once it is spread on a fill line. Ask for oxidation data on the format you will buy: a bulk oil file does not transfer to a powder, and a powder file does not transfer to a softgel. ## Writing each format into the specification For the oil, write the species and process, the GLA and linoleic ranges on the oil, free fatty acid, peroxide value, moisture, heavy metals, microbiology and the pack. For the powder, write the oil source, the oil load, the GLA on the oil, the carrier, moisture, peroxide and p-anisidine values, particle size, heavy metals, microbiology and the pack. The two share the oil identity and differ in everything the carrier touches. Do not copy the oil's oxidation limits onto the powder or the powder's mesh onto the oil. Do not accept a certificate that reports the powder's GLA without its basis, or the oil's identity without the full profile. A switch between formats goes through change control; it is not a purchasing substitution. Both are supplied here: the evening primrose oil page and the evening primrose oil powder page. Certificate lines sit on the COA page, stability rules on the stability page, process grades on the grades page, analytical methods under analytical methods, and lot release on the quality page. ## When to choose which Choose the oil for softgels, oil blends and any formula where the ingredient list should stay short. It carries the most GLA per gram, needs no carrier declaration and fits a capsule that cannot hold a large powder weight. Choose the powder for sticks, sachets, tablets, drink mixes and dry blends, where a free-flowing, dispersible material is required and the larger weight per serving is acceptable. If the target is a small capsule with a high GLA figure, the oil is the simpler route. If the target is a dry mix that has to mask the oil's taste, the powder is the practical route even though it carries less GLA per gram. The format decision comes before the grade: the oil's process grade is a separate choice on the grades page. ### 01 What the COA for fish oil actually contains URL: https://nutrition.rainwoodbio.com/products/fatty-acids/fish-oil/coa/ Reviewed: 2026-11-20 The certificate for a refined fish oil lot reports appearance, identification by the fatty-acid profile, EPA and DHA by GC, free fatty acid, peroxide value, p-anisidine value, moisture, heavy metals and microbiology. Each line needs its method, its release limit and a measured result in a separate column; the limits here are the catalog specification, not a batch result. In one lineA fish oil certificate is read as a set: the EPA and DHA figures need their GC basis, the peroxide and anisidine values need each other, and the contaminant panel belongs to the same lot. ## The certificate as a lot report A certificate is auditable when the reader can see what was measured, how, and against which limit. For fish oil the identity line is a profile, not one peak: the oil is a triglyceride mixture. The header should carry the lot code, species or mix, origin, production date and CAS 8002-50-4. That entry covers fish oil as a class, so it cannot replace the species line. Identity and composition · refined fish oil 18/12 | Parameter | Method | Acceptance limit | Appearance | Visual | Clear to slightly hazy; pale yellow to golden | Identification | GC-FAME, full profile against a reference | Profile conforms | EPA (C20:5 n-3) | GC-FAME | 18.0–22.0% | DHA (C22:6 n-3) | GC-FAME | 12.0–16.0% | Free fatty acid, as oleic | Acid–base titration | ≤0.50% | Moisture | Karl Fischer titration | ≤0.1% EPA and DHA are separate lines because a total hides the split: 30% can be 20% EPA with 10% DHA, or 15% with 15%, and the ratio differs. DPA (C22:5 n-3) sits outside both figures. ## The GC basis and the oil basis The method transesterifies the oil to methyl esters, separates them on a capillary column and measures them with a flame-ionisation detector. Results are usually area per cent of the total fatty-acid peak area, sometimes weight per cent after response-factor correction; the certificate should state the basis, column and standard. An area percentage is not milligrams per gram of oil. The glycerol backbone and the unsaponifiable fraction sit outside the fatty-acid total, so 20% EPA by area is not 200 mg of EPA in every gram without a conversion. A label dose in milligrams needs an internal standard or a validated factor, not the area per cent multiplied by the fill. Free fatty acid is titrated as oleic acid. It measures hydrolysis, not EPA, and a low FFA does not prove freshness: an oil can be barely hydrolysed and still oxidised. Moisture by Karl Fischer is small, but it belongs on the certificate because water drives hydrolysis and a wet oil oxidises faster. ## Release limit, result and the oxidation pair The release limit is the boundary; the result is what the laboratory measured. Both belong on the page in separate columns, with the method beside them. A result column that repeats the specification range is a copy of the gate, not a measurement. Oxidation is read as a pair. Peroxide value counts hydroperoxides, the first products; p-anisidine value counts the aldehydes that follow. PV can fall as hydroperoxides decompose while p-AV climbs, so a low PV on an older lot is not proof of freshness. TOTOX is twice PV plus p-AV; the catalog limits allow a TOTOX of 30, while the GOED voluntary monograph uses a ceiling of 26. A buyer who wants 26 writes it into the purchase specification; it is a benchmark, not a statutory limit. Release limits and the evidence expected for each line | Parameter | Release limit | Evidence on the certificate | Free fatty acid | ≤0.50% as oleic | Measured percentage, with the titration method | Peroxide value | ≤5.0 meq O₂/kg | Measured value, method and test date | p-Anisidine value | ≤20.0 | Measured value; TOTOX if agreed | Moisture | ≤0.1% | Measured percentage by Karl Fischer | Heavy metals | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | One measured value per metal, in mg/kg | Microbiology | Plate count and absence tests | The plate count and the absence result for the lot Report heavy metals per element; a single sum hides the element that matters. Microbiology needs a count plus an absence statement, not a tick. “Conforms” is a conclusion the reader should reach from the numbers. ## What moves between lots Species, fishing ground, season and refining move the profile. Anchovy, sardine and menhaden do not deliver the same EPA to DHA ratio, so a species change without a specification change is a material change. Refining moves free fatty acid, colour, moisture and oxidation more than it moves the fatty-acid ratio, but each step adds heat and oxygen contact. An 18/12 designation is a commercial target, not a species. Two conforming lots can sit at 18/12 and 22/16, about 300 mg and about 380 mg of EPA+DHA per gram. That difference is visible to the formulator and invisible to a label that says only “fish oil”. Colour runs from pale yellow to golden; a greenish or brown cast can point to oxidation or a different source. Haze at a cool temperature can be a wax fraction, not an adulteration signal. Odour is the least quantitative release check and one of the most useful: a fresh oil smells mild, an oxidised one is fishy or paint-like. ## When an independent test earns its place An outside laboratory is worth using when the source is new, a market is being entered for the first time, an oxidation result is disputed, or the certificate does not prove a form or species claim. The panel should close the gaps rather than repeat the certificate: GC-FAME with the chromatogram and EPA, DHA and DPA separately; PV, p-AV and TOTOX by named methods; free fatty acid; moisture; ICP-MS for the metals; dioxins and PCBs by GC-HRMS where the market requires them; intact-lipid analysis for triglyceride against ethyl ester; and sterols or cholesterol where a vegetable-oil dilution is suspected. Every screen should come with its limit of quantification: “not detected” without a limit describes the method, not the oil. Keep the chain of custody intact, test the retained sample, and put the lot code on the report. In a dispute, send the referee the retained sample, the supplier certificate and the agreed specification, and ask for the discriminating test rather than another run of the same assay. ## Supplier comparison Compare six lines: species and source; form and concentration; EPA and DHA with their basis; FFA, PV, p-AV and TOTOX; the contaminant panel; and pack size with the lot code. Two offers that agree on “30% omega-3” but differ on species, form or oxidation describe different oils. Traceability: who refined the lot, which steps were applied, whether an antioxidant was added and whether the pack was nitrogen-blanked. The catalog specification sits on the fish oil product page. The identity tests are set out on the identity page; the oxidation story is on the stability page; the separation method is indexed under methods; the release workflow is described on the quality page. ### 02 Refined, concentrated or powder: choosing a fish oil grade URL: https://nutrition.rainwoodbio.com/products/fatty-acids/fish-oil/grades/ Reviewed: 2026-11-20 Fish oil is bought by concentration and form before it is bought by brand. The refined triglyceride oil in this catalog carries 18.0–22.0% EPA and 12.0–16.0% DHA, a roughly 30% omega-3 oil usually written 18/12; a concentrated oil, a re-esterified triglyceride and a spray-dried powder are different ingredients with different labels, oil loads and capsule sizes. The grade question is therefore what the dosage form and the label can carry. In one lineThe grade is the oil's concentration and form before it is a brand: a refined 18/12 triglyceride, a concentrated ester and a spray-dried powder are three different ingredients. ## Why fish oil is a family, not one specification The same fishery can yield a refined oil at 18/12, a concentrate at 50–90% EPA+DHA, and a powder at 10% on a starch carrier. The first is the oil as refined; the second has been transesterified and distilled; the third is an emulsion dried onto a carrier. Each step changes the ingredient name, the mass per serving and the evidence the certificate has to carry. The 18/12 designation is a convention: 18% EPA and 12% DHA by GC, not 18 g of oil. It is a natural triglyceride profile, usually from anchovy, sardine or a blend. A concentrate can reach 30% with a different ratio and a different chemical form; the number alone does not describe it. Grade is not a quality ladder. A 10% powder is not a worse oil than an 18/12 oil; it is a different delivery format. A 50% concentrate is not automatically better for a softgel if the label and the dose are built around the oil. The grade is a fit question, not a ranking. ## The grades side by side Fish oil grades and what each one changes | Grade | Typical EPA+DHA | Form | What changes | Refined triglyceride 18/12 (this product) | About 30% | Triglyceride | The baseline oil for softgels and oil blends | Concentrated ethyl ester | About 50–90% | Ethyl ester | Smaller capsule; ester ingredient name and intact-lipid test | Re-esterified triglyceride | About 50–80% | Triglyceride | Concentrate on a glycerol backbone; a second process step | Microencapsulated powder | About 10% | Oil on a starch carrier | Flow, stick packs and a carrier declaration | Cod liver oil | Natural and variable | Triglyceride | Fish liver oil with vitamins A and D; a different ingredient This page supplies the first row: a refined triglyceride oil at 18/12. The concentrate and the powder are separate purchases with their own specifications, even when the EPA+DHA total looks similar. The powder is compared with the oil on the oil versus powder page, and its own catalog sits on the fish oil powder product page. ## What the oil is like to handle Refined fish oil is a clear to slightly hazy, pale yellow to golden liquid at room temperature. It is insoluble in water and soluble in fats and organic solvents. Density is around 0.92 g/mL, so 1 kg is about 1.09 L; a 1,000 mg softgel is not 1,000 mg of EPA+DHA. Viscosity rises as the oil cools and as saturation rises; a refrigerator test can cloud the oil, and that cloud is not a defect by itself. Odour and flavour are the practical oxidation senses. A mild marine odour is normal; a sharp, fishy or paint-like note points to aldehydes. Colour is a weak signal, because bleaching removes pigments and a pale oil can still be oxidised. Haze can come from waxes, stearins or moisture, so identify the cause before rejecting a lot. Handle the oil in stainless steel or glass. Copper and iron catalyse oxidation at low levels, so contact materials belong in the process description and in the vendor audit. Keep the bottle closed and the drum sealed; the headspace is the oxidation reservoir, and a half-full drum is a larger one. ## The dose arithmetic behind the grade On the label arithmetic, one gram of an 18/12 oil is treated as about 180 mg EPA and 120 mg DHA, or 300 mg EPA+DHA. At the top of the catalog range, 22/16, the same gram is about 380 mg. A 1,000 mg softgel filled with 18/12 oil therefore carries about 300 mg EPA+DHA, not 1,000 mg; the certificate's GC basis governs the actual milligrams. Work backwards from the label. A product that declares 300 mg EPA+DHA per serving needs about 1.0 g of 18/12 oil, about 0.6 g of a 50% concentrate, or about 3.0 g of a 10% powder. Those are arithmetic examples, not recommendations. The serving size, the capsule shell and any overage are the formulator's decisions; the oil figure is the input. Density matters for volume dosing. At about 0.92 g/mL, 1 g of oil is about 1.09 mL, and a 500 mg softgel holds about 0.54 mL. A dropper or a stick pack measured by volume needs the density on the specification, not an assumed 1.0 g/mL. ## Writing the grade into the specification Specification lines that fix the fish oil grade | Line | What to write | Why it matters | Identity | Refined fish oil, triglyceride, species declared, CAS 8002-50-4 | Sets the ingredient name and the source | EPA | 18.0–22.0% by GC-FAME | Fixes the concentration and the basis | DHA | 12.0–16.0% by GC-FAME | Separates the profile from a total | Oxidation | FFA ≤0.50% as oleic; PV ≤5.0 meq O₂/kg; p-AV ≤20.0 | Sets the release state of the oil | Moisture | ≤0.1% by Karl Fischer | Limits hydrolysis | Allergen | Fish declaration and species statement | Follows the source, not the grade | Pack | 1 kg amber bottle or 25 kg HDPE drum; antioxidant declared | Fixes the barrier and the label Write the form and the concentration, not only “fish oil”. Name the species or the mix; name the antioxidant if one is added; state the GC basis. A specification that says “omega-3 30%” leaves the EPA/DHA split, the form and the oxidation state open, and three suppliers can meet it with three different oils. ## When another grade is the right choice Choose a powder when the dosage form is a stick pack, a tablet or a drink and flow matters more than mass per gram. Choose a concentrate when capsule size is the constraint and the label can carry the concentrated form. Choose cod liver oil only when the formula is built on fish liver oil and its vitamin A and D contribution is declared; it is not interchangeable with body oil. Do not switch grade to solve an oxidation problem. A concentrate oxidises too, and a powder can mask oxidised oil behind a carrier. The grade is a formulation decision; oxidation control is a separate one, set out on the stability page. The catalog specification is on the fish oil product page. The certificate lines are on the COA page; the tests that separate one oil from another are on the identity page; the allergen and market rules are on the compliance page; the separation method is indexed under methods. ### 03 Fish oil oxidises; the pack and the headspace decide the shelf life URL: https://nutrition.rainwoodbio.com/products/fatty-acids/fish-oil/stability/ Reviewed: 2026-11-20 Fish oil does not spoil like a wet ingredient; it oxidises. Oxygen attacks the double bonds, hydroperoxides appear first and aldehydes follow, while heat, light and trace metals speed the sequence. Shelf life is a property of the pack and the storage condition, not of the oil alone. In one lineFish oil fails by oxidation, not by spoilage: oxygen, light and heat raise the peroxide and anisidine values, and the pack is the only barrier between them and the oil. ## The bulk oil: moisture, headspace and the seal The bulk oil has a moisture limit of ≤0.1%, so water is a minor component. It is still relevant: hydrolysis raises free fatty acid, and water droplets can seed oxidation. The larger risk is the air above the oil. Every opening of a bottle replaces part of the headspace, and a half-used drum holds a large oxygen reservoir. Keep caps tight, transfer a part-used drum into a smaller closed container, and specify a nitrogen blanket if the buyer wants one; it is not implied by the standard pack. Amber glass and opaque HDPE block light, but a clear transfer line or an open lid defeats the barrier. Store the oil in the dark. Copper and iron catalyse the reaction at low levels, so pumps, lines and fittings should be stainless steel or glass. A warm loading bay is an exposure even when the warehouse is cool. ## Oil in a liquid matrix: the interface Fish oil does not dissolve in water. A drink or a liquid supplement is an emulsion, and the oil-water boundary is where oxygen meets the oil. Smaller droplets mean more boundary; emulsifier, homogenisation, pH and heat all change the rate. A bulk oil test cannot predict the emulsion. In a softgel the fill is enclosed, not dissolved. The shell's oxygen and moisture permeability and the quality of the seam decide the protection, and a clear shell on a lit shelf is still an exposure. For a liquid, test the finished emulsion: PV and p-AV at fill and through storage. A nitrogen flush, low dissolved oxygen and an opaque pack help; an antioxidant slows the chain but does not undo existing damage. ## What drives the reaction Factors that move refined fish oil during storage | Factor | What it does | Control | Oxygen | Adds hydroperoxides; aldehydes follow | Small headspace, nitrogen, sealed pack | Light | Starts photochemical oxidation; colour fades | Amber bottle, opaque drum, dark store | Heat | Speeds every step of the chain | Cool store and low process temperature | Copper and iron | Break down hydroperoxides | Stainless steel and glass; avoid contact | Water | Hydrolysis; free fatty acid rises | Dry oil, sealed pack, low humidity | Antioxidant | Delays the chain; does not reverse it | Declare the type and the level The factors interact. A warm, bright store with a half-empty bottle is worse than three separate effects, and a softgel on a sunlit shelf combines light and heat in one pack. The useful question is which pack, at which condition, for how long. ## A stability protocol for the oil A storage study should name the pack, the condition, the time points and the tests. Typical conditions are 25 °C/60% relative humidity for long term, 30 °C/65% for intermediate and 40 °C/75% for accelerated, with a light-exposure arm added. For bulk oil, a 60 °C oven test ranks formulations but does not substitute for ambient data. At each point measure PV, p-AV, TOTOX, free fatty acid, moisture, appearance and odour. Run EPA and DHA at the start and the end to confirm the profile. Report the numbers rather than a pass tick, and identify the pack and the lot family. Data from a 1 kg bottle does not cover a 25 kg drum, because headspace and opening history differ. Rancimat gives an induction time under heated air. Use it to screen antioxidants or lots, then confirm the result in the pack. ## How the finished formula changes it A softgel, an emulsion and a powder expose the oil differently. The softgel shell is a barrier, but the seam is a weak point. An emulsion adds an interface and often a heat step. A powder coats the oil in a starch wall; the surface oil remains exposed, and the powder's moisture limit is 5.0% rather than 0.1%. A blend with vegetable oil lowers EPA+DHA per gram and changes the sterol profile. An antioxidant or an overage cannot restore an oil that has already oxidised; the aldehydes remain, and the odour returns. ## Setting the retest period There is no single shelf-life figure for fish oil. The retest period is assigned to a pack and a storage condition, and it rests on the stability file for that pack. Without the pack, the condition and the test panel, a number is only a claim. At the end of the retest period, re-test the retained sample before extending use. Do not assume an extension, and do not apply a bulk result to a repacked bottle or a softgel. The finished product needs its own study, in its own matrix. The standard packs are listed on the MOQ page; the release tests are on the COA page; the identity tests are on the identity page; the powder format is covered on the fish oil powder stability page; the oxidation methods are indexed under methods; the release workflow is on the quality page. ### 04 Fish oil: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/fatty-acids/fish-oil/moq/ Reviewed: 2026-11-20 Refined fish oil starts at 1 kg in an amber bottle, with a 25 kg HDPE drum as the bulk pack; standard dispatch is 1–7 days from confirmation. To quote firmly, we need the oil's form and concentration, its species or source, the agreed specification, the pack and quantity, the destination and Incoterm, and the documents the buyer's market requires. In one lineThe 1 kg amber bottle is the smallest unit we release as a lot; it is enough to trial, retain and retest without splitting a drum. ## Why the floor is one kilogram One kilogram is enough for a bench trial, a retained sample and an outside test, and the bottle can carry the lot code from release through the trial. The pack is a traceable commercial unit, not a scoop from a drum. Below that size, oil is split and repacked: handling goes up, the original pack identity is lost, and the chemistry has not changed. A 25 kg drum cuts handling per kilogram but ties up inventory. If the retest period will expire before the oil is used, the drum is the wrong pack, however convenient the unit size looks on paper. At about 0.92 g/mL, 1 kg is roughly 1.09 L and 25 kg roughly 27 L, so the minimum is a volume decision as well as a weight one. ## The bottle and the drum Standard refined fish oil packs | Pack | Net weight | Typical use | Notes | Amber glass bottle | 1 kg | Trial, sample, small batch | Light barrier; cap gasket is the seal | HDPE drum | 25 kg | Production | Opaque and robust; closure and liner seal it Glass keeps light off the small pack; the cap gasket keeps air out. HDPE is opaque and hard-wearing, but the closure and liner do the sealing, so a damaged liner is a real defect. Record the date a drum is opened, keep it off a damp floor, and do not leave a part-used bottle in sunlight. If you need a nitrogen blanket, write it into the purchase specification: it is not part of the standard pack. The lot code on the bottle, the drum and the certificate should agree. ## From confirmation to dispatch Confirmed orders for the standard pack ship in 1–7 days. That covers picking, paperwork and handover to the carrier; transit, customs and the buyer's own release sit outside it. A concentrate, a powder or a special pack carries its own lead time and should be quoted separately. Ask for a dispatch date as well as the range, and confirm whether the consignment moves as a parcel or a pallet. The Incoterm decides who books freight and who clears entry. Documents should travel in the same consignment as the oil; a COA that arrives after the drum has been opened is harder to tie to the lot. ## Six details a quote needs A useful quotation is built from six entries: - Oil and form. Refined fish oil, triglyceride, 18/12, CAS 8002-50-4. - Species and origin. Anchovy, sardine or a declared blend, with the source named. - Specification. EPA and DHA with the GC basis, FFA, PV, p-AV, moisture, metals and the fish allergen statement. - Pack and quantity. 1 kg amber bottle or 25 kg HDPE drum. - Destination and Incoterm. Country, port or address, and trade term. - File and market. COA, TDS, SDS, species and origin record, GMO statement, and any destination-specific document. Without species, form and destination, two offers cannot be compared: the same oil may be right for one market and need extra paperwork for another. Commercial terms are stated on the quotation, not on this page. ## A lot you can test Qualification starts with the 1 kg bottle: test the fatty-acid profile, FFA, PV, p-AV and the metal panel, and retain part of the same bottle. The lot code must link the sample, the COA and the quotation. If it does not, the material is a demonstration rather than a qualified lot. For a bench request below 1 kg, oil is drawn from a bulk lot and repacked. It carries its own handling record and is not the catalog bottle; document the split and file its lot code with the trial data. The oil on the bench and the oil in the production drum may come from different lots even when both meet the specification. ## Terms before the first purchase order Before the first production order, put the commercial and quality terms in one document: Incoterm, pack, dispatch, specification revision, lot COA, retained sample, retest period, change control and the fish allergen statement. A quality agreement is easier to negotiate before there is a dispute than after one. If a lot fails the agreed limits, compare the retained sample at a referee laboratory using the named method. A photograph of the drum is not a result. Name the referee laboratory and who pays in the agreement, and settle PV, p-AV and TOTOX before the first delivery, because oxidation is the most likely disagreement. The catalog specification is on the fish oil product page; the release tests are on the COA page; the market files are on the compliance page; the MOQ term is defined in the glossary; shipping documents are covered on the logistics page. ### 05 The regulatory file for fish oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/fish-oil/compliance/ Reviewed: 2026-11-20 Fish oil is a food and food-supplement ingredient with a long history of use, so the question in the main markets is not whether it is permitted but what the file must show. Four checks decide a launch: the ingredient status for the market, the fish allergen, the contaminant panel for the product as sold, and the label and claim wording. The buyer's regulatory team confirms the route; this page lists the documents and the questions. In one lineFish oil is a food ingredient with a long history; the fish allergen, the contaminant panel and the label wording are what the file has to prove for the destination. ## The four parts of the file A fish oil file is assembled in four parts: the specification for the exact oil and form, the lot certificate, the destination's limits and label rules, and a change record for source, process and pack. The certificate is lot evidence, the TDS is the agreed specification and the SDS covers handling. None of them chooses the destination route; the buyer's team records that separately. Fish oil is not one regulatory object. A refined triglyceride oil, an ethyl ester concentrate and a microencapsulated powder are different ingredients for labelling and for the file, even when the EPA+DHA total is the same. State the form and the concentration before citing a rule. ## European Union Refined fish oil has a long food history and is not a novel food in the EU. Food supplements are governed by Directive 2002/46/EC and labelling by Regulation (EU) No 1169/2011. Annex II of that regulation lists fish and products, and the entry has no carve-out for refined oil, so a fish oil supplement needs the allergen declaration. Name the species in the supplier file even when the label does not. Contaminants are governed by Regulation (EU) 2023/915, the successor to Regulation (EC) No 1881/2006. Fish oil sits within the dioxin and PCB limits for oils and fats, and food supplements have their own lead, cadmium and mercury limits; the finished-product dose decides the calculation. Health claims fall under Regulation (EC) No 1924/2006, where only the authorised omega-3 claims with their conditions may be used. This page makes no claim. Check the current consolidated text as of this review. ## United States In a US supplement, fish oil is a dietary ingredient under DSHEA; 21 CFR 111 applies to the finished product and the Supplement Facts panel declares the amount per serving. Fish is a major food allergen under FALCPA. The statute excludes highly refined oils, but the supplier must document the refinement and the protein control, and the exclusion is not assumed. A conventional food needs a lawful-use basis, whether GRAS or another route. Structure/function language is reviewed separately, with substantiation and the DSHEA disclaimer. No disease claim is available. The certificate supports the material, not the wording on the pack. ## United Kingdom Great Britain applies retained food law. Fish remains on the 14-allergen list, and a prepacked item sold direct to the consumer must carry the allergen information under the Food Information Regulations 2014. GB contaminant limits are set separately from the EU text, so check the current GB rule rather than the EU column. Northern Ireland follows the EU framework. The delivery address decides which regime applies. ## Contaminants and the oxidation limits The table separates catalog quality limits from destination contaminant limits; they are different kinds of number and should not be read as one gate. Limits to confirm for the fish oil and the finished product | Parameter | Catalog or benchmark | What the file should show | Lead | ≤3 mg/kg | Lot result, method and finished-product calculation | Cadmium | ≤1 mg/kg | Lot result and any category exception | Mercury | ≤0.1 mg/kg | Lot result and method | Arsenic | ≤2 mg/kg | The agreed limit and the method | Dioxins and PCBs | Destination limit as WHO-TEQ | GC-HRMS result for the lot, where required | Peroxide value | ≤5.0 meq O₂/kg catalog | A quality limit, not a statutory contaminant limit | p-Anisidine value | ≤20.0 catalog; TOTOX 26 benchmark | The measured pair and TOTOX | Fish allergen | Declaration required in the EU; US rule depends on refinement | Species, allergen statement and label review PV and p-AV are quality limits, not statutory contaminant limits. They still belong in the file, because a product can be legally compliant and organoleptically spoiled. The reverse is also true: a fresh oil can fail a contaminant limit. Keep both sets of evidence. ## Claims and the label This site makes no disease claim for fish oil. In the EU, omega-3 claims are limited to the authorised list and their conditions of use; a heart, brain or vision claim belongs to the brand's review of the finished product. In the US, a structure/function statement needs substantiation and the DSHEA disclaimer. The label must declare the fish allergen in the form the market requires and must not imply a disease benefit. Species and form are not claims in themselves, but they change the ingredient name and the file. “Fish oil” on a label does not say triglyceride or ethyl ester, or which fish was used; the specification and the supplier file do. ## Documents for the fish oil file The folder should contain the COA with the GC profile, EPA and DHA, FFA, PV, p-AV, moisture, heavy metals and microbiology; the TDS; the SDS; the fish allergen statement with the species; the origin and species record; the GMO statement; the antioxidant declaration; the form statement; and, where required, dioxins and PCBs by WHO-TEQ. Add a residual-solvent or processing-aid statement if the refining route uses one, and the quality certificates the buyer requests. Keep a versioned index at the front of the folder. A missing document should be flagged before the shipment leaves, not after the container arrives; it is easier to close at quotation than at the port. ## Checks before the first order - Specification version, form, concentration and species are named. - The COA, TDS and SDS sit beside the allergen, species, GMO and antioxidant declarations. - Contaminant results are recalculated at the finished serving. - The fish allergen statement supports the label in every destination market. - Label and claim wording have been checked for the destination. - Source, process and pack sit under a documented change control. The catalog specification is on the fish oil product page; the certificate lines are on the COA page; the identity tests are on the identity page; market summaries sit under regulatory notes; the release workflow is on the quality page. ### 06 How we prove a fish oil lot is the declared oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/fish-oil/identity/ Reviewed: 2026-11-20 A fish oil lot is identified by four things that have to agree: the species and source, the lipid form, the full fatty-acid profile and the oxidation state. The EPA+DHA total alone is not identity, because a blend, a lower-grade oil or an oxidised oil can hit the same total. CAS 8002-50-4 covers fish oil as a class and does not name the species. In one lineIdentity is the full fatty-acid profile, the EPA and DHA ratio, the intact lipid form and the species record, because an EPA+DHA total can be blended to order. ## Four layers that have to agree Identity is a set of agreeing measurements, not one certificate line. Each layer answers a different question, and a supplier who answers only the assay has described the concentration, not the oil. Four layers of fish oil identity | Layer | Question | Evidence | Source | Which fish, from where, refined by whom? | Species statement and traceability record | Form | Triglyceride, ethyl ester or re-esterified? | Intact-lipid analysis by HPLC or GC | Profile | Is the fatty-acid pattern consistent with the source? | GC-FAME with the chromatogram | Oxidation | Is the oil fresh? | PV, p-AV, TOTOX, free fatty acid The certificate answers the profile and the oxidation state. The source lives in the supplier file, and the form is a declaration until someone analyses the intact lipid. All four layers must describe the same lot, with one code tying the certificate, the pack and the retained sample together. ## The EPA to DHA ratio and the minor acids Natural fish oil has more EPA than DHA, usually at an EPA to DHA ratio around 1.2–1.8 for anchovy and sardine. The catalog 18/12 designation sits at 1.5 nominal; the full range of 18–22% EPA and 12–16% DHA spans about 1.13–1.83. A ratio outside the source's normal range can be a blend, a concentrate or a different species. The ratio is a consistency check, not a specification unless the buyer writes one. Fatty-acid markers and what a shift suggests | Marker | Typical in fish oil | What a shift suggests | EPA (C20:5 n-3) | 18–22% in this grade | Dilution or a different source | DHA (C22:6 n-3) | 12–16% in this grade | Dilution, algal oil or a concentrate | DPA (C22:5 n-3) | Present, minor | Source change; it is not EPA or DHA | Palmitic (C16:0) | Present, major saturate | Vegetable or animal fat dilution | Linoleic (C18:2 n-6) | Low | Seed-oil dilution | Cholesterol | Present | Falls as vegetable oil rises | Phytosterols | Low | Rise with vegetable oil The minor acids are the useful part. A blend built to hit 18% EPA and 12% DHA can still show a linoleic figure and a phytosterol pattern that a marine oil does not have. A concentrate can hit almost any ratio, so the ratio alone does not prove a natural oil; the form and the sterol pattern sit beside it. ## Why XRD does not identify a liquid oil XRD reads the spacing of planes in a crystal lattice. Refined fish oil is a liquid at room temperature and has no lattice, so a diffraction pattern from the neat oil says nothing about the species. The technique belongs to the powder: the starch carrier is crystalline enough to diffract, and the pattern can show the carrier phase or a crystalline foreign phase. On a powder certificate, an XRD line is a check on the carrier, not on the oil. It says nothing about the fatty-acid profile or the species. For the oil, the identity instruments are GC-FAME for the profile and, where the form is disputed, intact-lipid analysis by HPLC or GC. FTIR can give a fingerprint for a quick comparison but does not quantify EPA and DHA. ## Where substitutions show up Common fish oil substitutions and the signals | Route | Signal | Test | Vegetable oil dilution | Linoleic and phytosterols up; cholesterol down | GC profile, sterol and cholesterol panel | Lower-grade fish oil | Ratio and DPA drift | GC against a retained reference | Oxidised oil | PV and p-AV up; fishy odour | Oxidation panel with TOTOX | Ethyl ester sold as triglyceride | Form mismatch; label ingredient wrong | Intact-lipid analysis by HPLC or GC | Fish liver oil sold as body oil | Vitamin A and D high | Vitamin assay and label review | Species substitution | Profile differs from the declared source | Species record and GC profile Each route has a test, and no single test covers all of them. A certificate that reports only EPA, DHA and PV leaves the first, fourth and fifth routes open. Colour is the weakest signal: bleaching removes pigments, and a pale oil can still be oxidised or diluted. ## Writing identity into the specification Name the species and the source, not only “fish oil”: for example, “refined anchovy oil” or a declared blend, with the origin and the refiner. Add the form (triglyceride), the EPA and DHA ranges with the GC basis, the full profile with the minor acids that matter, free fatty acid, PV, p-AV, moisture, the contaminant panel and the fish allergen statement. State how identity is measured: GC-FAME against a certified standard, with the chromatogram on request and an intact-lipid method where the form is disputed. A specification that says only “fish oil 30%” gives the laboratory no way to check the source, the form or the oxidation state. A specification that names the species, the form and the profile does. Those lines should appear on the certificate, with a lot code that ties the pack to the retained sample. ## Five questions to put to a supplier - What species and origin is the oil, and is the lot single-source or blended? - Is the oil triglyceride, ethyl ester or re-esterified, and which method proves it? - What are the EPA, DHA and DPA figures on the same lot, with the chromatogram and the GC basis? - What are the PV, p-AV, TOTOX and free fatty acid values, with methods and production date? - How is the fish allergen declared, and will you send the COA for the shipping lot? The catalog specification is on the fish oil product page; the certificate lines are on the COA page; the grades are compared on the grades page; the oil and powder are compared on the oil versus powder page; the separation method is indexed under methods. ### 02.1 Fish oil vs fish oil powder: the carrier, the dose and the label URL: https://nutrition.rainwoodbio.com/products/fatty-acids/fish-oil/grades/fish-oil-vs-fish-oil-powder/ Reviewed: 2026-11-20 Fish oil and fish oil powder are not two grades of one ingredient. The oil is a liquid triglyceride; the powder is that oil emulsified and dried onto a carrier, usually modified starch, with an antioxidant. On the 18/12 designation, a gram of oil carries about 300 mg EPA+DHA; a gram of a 10% powder carries about 100 mg. The choice changes the carrier, the mass per serving and the ingredient list. In one lineThe oil and the powder deliver the same omega-3 only after the carrier is counted: a gram of oil at 18/12 carries about 300 mg EPA+DHA, while a 10% powder carries 100 mg. ## The two products side by side Refined fish oil and microencapsulated fish oil powder | Property | Refined fish oil | Fish oil powder 10% | Form | Liquid oil | Free-flowing powder | EPA+DHA per gram | About 300 mg at 18/12 | About 100 mg | Carrier | None | Modified starch and antioxidant | Appearance | Clear to slightly hazy oil | White to light yellow powder | Typical use | Softgels and oil blends | Capsules, tablets, sticks and drinks | Fish allergen | Present from the oil | Present from the oil, not the carrier The powder is a different product, not a bench dilution. It has its own specification, its own certificate and its own catalog page. The oil's catalog is on the fish oil product page; the powder's is on the fish oil powder product page. ## The carrier is the difference the label must show A 10% powder built on a 30% oil needs roughly one third oil and two thirds carrier, moisture and antioxidant; a concentrate needs less oil and more carrier to reach the same 10%. The oil load belongs on the technical data sheet, not inferred from the assay. The carrier is usually a modified starch, and the antioxidant is named because both are ingredients in the finished label. The carrier changes the physics: flow, density, dispersibility and surface oil. Surface oil is the fraction exposed to oxygen, so the wall protects the bulk of the oil but not the droplet surface. A powder can pass a 10% assay and still fail on oxidation or on flow. Those are process and specification questions, not marketing ones. The carrier also changes the mass. Three grams of a 10% powder carry the same EPA+DHA as one gram of 18/12 oil, so a capsule or a stick built on the powder is larger for the same dose. That is the trade for flow and for a dry blend. ## The dose arithmetic To deliver 300 mg EPA+DHA, a formula needs about 1.0 g of 18/12 oil, about 3.0 g of a 10% powder, or about 0.6 g of a 50% concentrate. The powder therefore takes three times the mass of the oil for the same omega-3, which decides capsule size, stick weight and the number of servings per pack. Mass needed to deliver 300 mg EPA+DHA | Ingredient | EPA+DHA per gram | Mass needed | Refined oil 18/12 | About 300 mg | About 1.0 g | Concentrated oil 50% | About 500 mg | About 0.6 g | Fish oil powder 10% | About 100 mg | About 3.0 g These are arithmetic examples, not recommendations. The label dose is the brand's decision; the oil or powder figure is the input. A 500 mg capsule holds about 150 mg EPA+DHA from 18/12 oil, but only about 50 mg from a 10% powder, before any overage. ## What the label has to say The ingredient list names what is sold. The oil is declared as fish oil; the powder is declared as fish oil powder, with the carrier and antioxidant in the ingredient list. The nutrition or Supplement Facts panel quantifies EPA+DHA per serving, not the powder weight. A label that declares 3 g of powder and 300 mg EPA+DHA is consistent; one that declares 300 mg EPA+DHA and 1 g of powder is not, unless the powder is 30%. Fish is a major allergen in both formats. In the EU, Annex II of Regulation (EU) No 1169/2011 covers fish and products, with no refined-oil exemption; the powder's carrier does not change the source. In the US, fish is a major food allergen under FALCPA, and the highly refined oil exclusion is not automatic. The allergen statement belongs on the specification for both products, and the species belongs in the supplier file even when the label omits it. The form is a label fact as well. “Fish oil” does not say triglyceride or ethyl ester, and the two are different ingredients. If the powder is built on an ethyl ester concentrate, the specification should say so, because the label and the identity test follow the oil, not the carrier. ## Oxidation in the two formats Both formats oxidise, but the failure mode differs. The oil has a small surface and a large headspace; the powder has a large surface and a protective wall. The powder's moisture limit is ≤5.0% against ≤0.1% for the oil, so the powder carries more water and more matrix. PV and p-AV are measured on the oil or on the powder, and the basis must be stated; a powder result cannot be compared with an oil result without the oil load. Neither format is automatically more stable. The powder's wall slows oxygen ingress, but the surface oil is exposed; the oil's pack can be nitrogen-blanked, but the headspace is a reservoir. The pack, the storage condition and the test panel decide the shelf life, and the data belongs to the exact pack. The oil protocol is on the fish oil stability page, and the powder protocol on the powder stability page. ## When to choose which Choose the oil for softgels, oil blends and any formula where mass per serving and a short ingredient list matter. Choose the powder for sticks, tablets, drink mixes and capsules where flow and a dry blend matter more than mass. The powder is not a drop-in at the same weight: the dose arithmetic, the carrier declaration and the oxidation basis all change. Both carry the fish allergen, and neither format is a way to avoid it. The oil's identity is proved by its fatty-acid profile and form; the powder's identity adds the carrier and the oil load. The release tests are on the COA page, the market rules on the compliance page, the analytical methods under methods, and the release workflow on the quality page. ### 01 What the COA for flaxseed oil actually contains URL: https://nutrition.rainwoodbio.com/products/fatty-acids/flaxseed-oil/coa/ Reviewed: 2026-11-20 A certificate for a flaxseed oil lot reports appearance, identification by gas chromatography of the fatty acid methyl esters, the alpha-linolenic acid (ALA) figure with linoleic and oleic beside it, free fatty acid, peroxide value, moisture, the heavy-metal panel and microbiology. Every line needs a method, a release limit and the measured result in its own column. The limits on this page are the catalog specification; the lot certificate is the record of the oil inside a particular bottle or drum. In one lineA flaxseed oil certificate is read from the fatty-acid profile and the oxidation pair together: ALA by GC, free fatty acid and peroxide value on the same lot, each with its method and its basis. ## The certificate as a lot report The catalog range for ALA is wide, so two conforming lots can sit twenty points apart. The certificate has to show where this lot falls, which acids accompany the ALA and what the oxidation values were at release. A row that says only “conforms” asks for trust without evidence. Identity and concentration are separate rows. Identity asks whether the whole fatty-acid profile is consistent with cold-pressed Linum usitatissimum seed oil. The ALA figure asks how much of that one acid is present. Identity and composition · cold-pressed flaxseed oil · CAS 8001-26-1 | Parameter | Method | Release limit | Appearance | Visual | Clear to slightly hazy oil, light yellow to golden | Identification | GC of fatty acid methyl esters against a reference profile | Profile conforms | Alpha-linolenic acid (C18:3 n-3) | GC-FAME | 45.0–65.0% | Linoleic acid (C18:2 n-6) | GC-FAME | 12.0–20.0% | Oleic acid (C18:1 n-9) | GC-FAME | 12.0–20.0% | Free fatty acid (as oleic) | Titration | ≤0.50% | Peroxide value | Iodometric titration | ≤5.0 meq O₂/kg | Moisture | Karl Fischer | ≤0.1% A certificate that prints ALA but omits linoleic and oleic leaves the identity question open, because a blend can be built to hit one acid figure while the rest of the profile drifts. ## The GC basis: area per cent, weight per cent and the oil basis Fatty-acid results come from transesterification to methyl esters and capillary gas chromatography with flame-ionisation detection. Percentages are reported as area per cent or as weight per cent after response-factor correction, and the two differ. The certificate should state the basis, the column and the standard, and carry the chromatogram when identity is contested. The C18:3 position is where resolution matters. Alpha-linolenic acid (C18:3 n-3) and gamma-linolenic acid (C18:3 n-6) share a carbon count and can co-elute on a short or weakly polar column, so a method that does not separate them can report a combined peak. The method note should show both peaks resolved. The chromatogram also shows any trans C18:3 created during refining, which is not the ALA the label declares. The oil basis is a second conversion. A figure of 55.0% on the oil means 550 mg of ALA per gram, before any carrier. On a microencapsulated powder the number is the oil figure times the oil load, and the certificate has to say which basis it reports; the conversion is worked through on the flaxseed oil powder page and in the grade comparison. ## Release limit versus batch result The release limit is the gate; the batch result is what the laboratory measured. Both belong on the page, in separate columns, with the method beside them. A result column filled with the range is a copy of the gate, not a result. Free fatty acid and peroxide value measure different failure routes. Free fatty acid reflects hydrolysis, which needs water; peroxide value reflects the first stage of oxidation, which needs oxygen and is accelerated by light and heat. A lot can sit inside both limits at release and still arrive with a painty odour if the pack was warm and half empty. What the result column should contain | Parameter | Release limit | Result column | Free fatty acid | ≤0.50% as oleic | A measured percentage, with the titration method | Peroxide value | ≤5.0 meq O₂/kg | A measured figure in the stated units | p-Anisidine value | Not fixed in the catalog; agree at order | A measured figure for the agreed limit | Moisture | ≤0.1% | A measured percentage by Karl Fischer | Heavy metals | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | A figure per element, not a single total | Microbiology | Counts and absence tests | The count and the absence statement for the lot The anisidine value measures the secondary aldehydes that appear as an oil ages, and it moves after the peroxide value has peaked and fallen. An oil can pass the peroxide gate while the anisidine figure shows it is stale. The catalog does not set that limit for the oil, so if the customer needs it, it belongs in the specification for every lot. ## What moves between lots The seed lot, the growing season and the pressing temperature move ALA inside the catalog window. Refining moves free fatty acid, colour and peroxide value much more than it moves the profile, so a refined oil can report the same ALA as a cold-pressed oil and behave differently in a softgel. Peroxide value is the most variable line: it depends on the seed condition, the press temperature, the headspace and the time since production. A result close to 5.0 leaves little room for a warm warehouse. Colour is the least quantitative line, and a darker shade prompts a storage question rather than an identity failure. A trend across lots says more than one result near an edge: ALA drifting low, peroxide climbing, or free fatty acid rising in a grade that should be low. The lot code should tie the certificate to the bottle, the drum and the retained sample; without that link the trend may describe another material. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a disputed ALA figure, a suspected blend or an oil that smells stale on arrival. The panel is narrow: GC-FAME with the full profile and chromatogram, peroxide and anisidine values, free fatty acid, sterols and tocopherols if the source is disputed, heavy metals and microbiology. Ask the laboratory to report its limit of quantification for each screen, and choose one working to ISO/IEC 17025. A “not detected” line without a limit describes the method, not the oil. Chain of custody matters: the sample tested should be the sample retained, and the report should name the lot and the pack. ## What to compare between suppliers Put six lines side by side: species and process; ALA with its basis; the full fatty-acid profile; free fatty acid, peroxide and anisidine values; the heavy-metal and microbiology results; and pack size with lot traceability. Two certificates that agree on ALA but disagree on linoleic or oleic are not describing the same oil. The catalog specification sits on the flaxseed oil product page. The tests that separate flaxseed oil from the oils that can copy its profile are on the identity page; the process grades are on the grades page; the methods are indexed under analytical methods; and lot release is described on the quality page. ### 02 Cold-pressed or refined: choosing a flaxseed oil grade URL: https://nutrition.rainwoodbio.com/products/fatty-acids/flaxseed-oil/grades/ Reviewed: 2026-11-20 Flaxseed oil is bought by process grade, not by a single assay number. The catalog form is cold-pressed, unrefined oil with the seed's own colour, flavour and minor components; a refined grade is the usual alternative when a neutral taste and a longer ambient shelf life matter. Within either grade the ALA window is agreed at order, and the microencapsulated powder is a separate delivery form rather than a grade of the oil. In one lineThe grade is a process decision: cold-pressed oil keeps the minor components and the flavour, while a refined oil trades them for a neutral taste and a slower start to oxidation. ## Why flaxseed oil has grades at all Flaxseed oil is a drying oil in the painter's sense: its ALA carries three double bonds, and those bonds react with oxygen until the oil thickens and sets. In a bottle the same chemistry is called rancidity. Everything that happens between the seed and the pack either slows that reaction or removes the evidence of it, and the process grade is the name for the choice. Refining is a sequence: neutralisation lowers free fatty acid, bleaching lowers colour and trace metals, and deodorisation strips volatile odour compounds under vacuum and heat. The result is a pale, mild oil with a low peroxide value at release. The same steps remove part of the tocopherol and sterol fraction, and the heat of deodorisation can create trans isomers if it is pushed. Cold pressing skips the sequence, so the oil keeps its colour, its green note and its minor components, along with a higher free fatty acid figure and a shorter tolerance for warmth. Neither route is a quality ladder. The grade has to fit the dosage form, the taste brief, the shelf life and the label wording, and the ALA figure is only one line in that decision. ## The two oil grades side by side Cold-pressed and refined flaxseed oil | Dimension | Cold-pressed | Refined | Process | Pressed and filtered; no solvent, no deodorisation | Neutralised, bleached and deodorised | Free fatty acid | Higher; catalog limit ≤0.50% | Lower, typically well inside the limit | Colour and odour | Golden to amber; seed and green notes | Pale yellow; mild, close to neutral | Minor components | Tocopherols and sterols retained | Partly reduced by bleaching and deodorisation | Oxidation at release | Peroxide value depends on the press and the pack | Usually lower at release; still rises in storage | Label fit | Supports a cold-pressed or unrefined description | Fits a neutral-taste or clear-oil brief The table explains why two quotations can differ by more than the ALA figure. A refined oil and a cold-pressed oil from the same seed lot land in the same ALA window and behave differently in a softgel, an emulsion and a taste panel. ## Colour, clarity and handling The catalog appearance is a clear to slightly hazy oil, light yellow to golden. Haze is normal in an unrefined oil: fine seed particles and waxes pass a coarse filter and settle slowly. An oil that is bright at filling can throw a sediment ring after a few weeks, which is a presentation problem rather than a specification failure. Filtration to a finer grade reduces it and also strips a little colour. Cold storage clouds a cold-pressed oil because the wax fraction crystallises. The cloud clears on warming, and the oil should be warmed gently and mixed before use rather than filtered cold, which would remove the waxes and part of the minor fraction with them. Viscosity is low at room temperature and rises in a cold room, so a drum should be conditioned before pumping. Handling is part of the grade. Oxygen, light and warmth are the three variables, and a nitrogen blanket, an amber bottle and a cool store are not optional extras for an oil with this profile. A pump that whips air into the oil at transfer is a quality risk, whatever the certificate says. ## Dose arithmetic and the dosage form The label arithmetic starts from the ALA floor. At 45.0% ALA, a gram of oil carries at least 450 mg; at 65.0% it carries 650 mg. A 500 mg softgel of the same oil carries 225–325 mg, and a 1,000 mg fill carries 450–650 mg. Those are the numbers that decide the fill weight and the number of capsules per serving, and they should be calculated from the release figure for the lot, not from the middle of the range. Rounding on the label goes one way. If the certificate reports 47.2% for the lot, the declared amount per capsule is based on 47.2%, with any overage decided by the brand's stability data rather than by the specification. Declaring the top of the range against a lot near the bottom is a labelling error that a comparison of certificate and panel exposes immediately. The dosage form follows the grade. A softgel fill or an oil blend takes the cold-pressed oil and accepts its colour and flavour; a clear beverage emulsion or a taste-sensitive chew needs the refined grade. Dry formats are not an oil question at all: a stick pack, tablet or dry blend requires the microencapsulated powder, which is a separate product with its own oil load and ALA basis. The comparison is on the oil versus powder page. ## What to write into the specification - “Cold-pressed flaxseed oil, Linum usitatissimum seed, CAS 8001-26-1.” - “ALA 45.0–65.0% by GC-FAME, with linoleic 12.0–20.0% and oleic 12.0–20.0%.” - “Free fatty acid ≤0.50% as oleic; peroxide value ≤5.0 meq O₂/kg; moisture ≤0.1%.” - “p-Anisidine value at the limit agreed at order, if the buyer's specification includes it.” - “Pack: 1 kg amber bottle or 25 kg HDPE drum, sealed and nitrogen-flushed where agreed.” - “Lot number, production date and retest date on the pack and the certificate.” Write the process grade and the ALA window as separate clauses. A specification that names only “flaxseed oil” leaves the supplier free to ship a refined oil to a cold-pressed brief, and one that fixes only the ALA figure leaves the oxidation question to chance. We supply the cold-pressed grade; a refined oil is a separate purchase with its own specification. ## When the other grade is the wrong choice Cold-pressed is the wrong choice when the oil has to be clear, mild and stable on a warm shelf, or when the formula cannot tolerate the green note and the colour. A taste panel will find it in a flavoured beverage. It is also the wrong choice when the label does not say cold-pressed and the buyer is specifying a property the formula never uses. Refined is the wrong choice when the label leans on the unrefined story, when the tocopherol and sterol fraction is part of the nutritional case, or when a deodorisation step has pushed the trans isomer figure up. The process record is the evidence either way, and it should travel with the lot. The catalog specification is on the flaxseed oil product page. The release tests are on the COA page, the oxidation behaviour is on the stability page, the analytical methods are indexed under methods, and the release workflow is described on the quality page. ### 02.1 Flaxseed oil vs flaxseed oil powder: the carrier, the dose and the label URL: https://nutrition.rainwoodbio.com/products/fatty-acids/flaxseed-oil/grades/flaxseed-oil-vs-flaxseed-oil-powder/ Reviewed: 2026-11-20 Flaxseed oil and flaxseed oil powder carry the same oil, but not the same dose per gram. The powder is a spray-dried emulsion of the oil in a starch matrix, at a 50% oil load and at least 22.5% alpha-linolenic acid (ALA); the oil is 100% oil and at least 45.0% ALA. The choice changes the carrier on the ingredient list, the mass per serving and the way the oil meets oxygen. In one lineThe powder is the same oil in a starch carrier: at a 50% oil load a gram carries half the oil, so the carrier, the dose and the oxidation exposure all differ from the bulk oil. ## The carrier is the difference Microencapsulation disperses the oil into droplets inside an emulsion and dries it into a powder. The wall material — here a modified starch — becomes the continuous phase, and the oil sits inside it as discrete droplets. The powder flows and blends like a powder because the carrier is what the scoop touches. That has three consequences. The ingredient list gains a carrier the oil does not have. The carrier must be assessed for its own allergen, GMO and origin status, a question about the starch source rather than about flax. And the powder is dispersible rather than soluble: it suspends in water, but the oil does not dissolve, and the drink separates if it stands. The carrier is not a filler. It is the structure that turns a liquid oil into a dry ingredient, and its level is set by the oil load the process can hold without surface oil dominating. ## Oil load and the ALA basis At a 50.0% oil load, half of the powder mass is oil and half is carrier. The powder's ALA figure is the oil figure multiplied by the load: 45.0% ALA oil gives 22.5% powder, and 55.0% gives 27.5%. The catalog floor of 22.5% on the powder is the same material as the 45.0% floor on the oil, expressed on the basis the customer weighs. Two numbers belong on the specification: the oil load and the ALA content, each with its method. A “50% ALA” powder would be a different product from a 50% oil powder, so print both figures on adjacent lines. A higher oil load is possible on request, and it moves both numbers and the free oil at the surface. The rest of the powder specification follows the matrix: moisture ≤5.0%, peroxide value ≤5.0 meq/kg and p-anisidine value ≤20.0 on the extracted oil, and particle size ≥95% through 40 mesh. ## The dose arithmetic The label declares ALA per serving, so the comparison has to use the same basis. At the catalog floors, the table shows what a gram and a 500 mg capsule deliver, and the mass needed for 450 mg of ALA. ALA delivered by the oil and by the 50% powder, at the catalog minimum | Material | ALA per 1 g | ALA per 500 mg | Mass for 450 mg ALA | Flaxseed oil, ALA ≥45.0% | ≥450 mg | ≥225 mg | 1.0 g | Flaxseed oil powder 50%, ALA ≥22.5% | ≥225 mg | ≥112 mg | 2.0 g The powder needs twice the mass for the same ALA, because half of what is weighed is carrier. That is not a defect; it is what a dry ingredient is. It becomes a problem when a capsule is sized on the oil figure and then filled with the powder: 500 mg holds 112 mg of ALA as the 50% powder and 225 mg as the oil, and no label wording changes that. The release result, not the floor, sets the declared amount. A lot at 24.0% ALA supports a higher declared amount than one at 22.6%, while declaring the floor against a lot near the top leaves material undeclared. ## What the label has to say The ingredient list is where the carrier appears. The oil is declared as flaxseed oil; the powder is declared with its carrier, and the carrier's source belongs in the allergen and GMO assessment. A starch from wheat and a starch from maize are not the same declaration even when both are called modified starch. The nutrition declaration states ALA per serving, on the powder basis for the powder and the oil basis for the oil. Neither market sets a Daily Value for ALA, so the panel carries an amount rather than a percentage. The amount is the figure the buyer's reviewer checks against the certificate and the oil load. Flaxseed is not on the EU Annex II allergen list or the US major-allergen list, so the oil itself does not trigger a declaration; the carrier and the other ingredients still have to be assessed. A vegetarian or vegan claim survives the switch either way, and a cold-pressed descriptor travels to the powder only if the oil inside it was cold-pressed and the record says so. ## Oxidation and the physical form Bulk oil exposes one large surface to the headspace, and every opening replaces part of that headspace with air. The powder exposes many droplets, but most sit behind the carrier; the vulnerable fraction is the free oil at the particle surface. That is why the powder carries an anisidine limit that the oil does not, and why the extracted-oil peroxide value is measured rather than assumed. The matrix is a barrier, not a seal. A powder stored warm and humid picks up moisture, the carrier softens, droplets coalesce and free oil rises; caking and a painty note follow. Sealed oil has the opposite risk profile: no caking, but a large headspace and a liquid that mixes oxygen through the mass when poured. Neither form is stable without its pack. The oil needs an oxygen barrier and a small headspace; the powder needs a moisture barrier and a sealed pouch. Neither inherits the other's stability data. ## When to choose which Choose the oil for a softgel fill, an oil blend or any format where the full mass can be oil and the taste and colour are acceptable. It is the shorter route to a given ALA dose per capsule, and it has no carrier to declare. Choose the powder for a stick pack, tablet, dry blend or beverage, where a liquid oil cannot be handled. Accept the carrier, size the dose on the powder basis and specify the oil load, the ALA figure and the anisidine limit together. The catalog specifications are on the flaxseed oil product page and the flaxseed oil powder page. The grade question for the oil itself is on the grades page; the analytical methods are indexed under methods; the release workflow is on the quality page. ### 03 Flaxseed oil oxidises; the pack and the headspace set the retest period URL: https://nutrition.rainwoodbio.com/products/fatty-acids/flaxseed-oil/stability/ Reviewed: 2026-11-20 Flaxseed oil is among the most unsaturated of the common seed oils: ALA is 18 carbons with three double bonds, and linoleic acid adds two more. Oxygen attacks those bonds, light and warmth accelerate the attack, and the fatty-acid assay can still read inside its range while the oil turns. Stability is therefore read from peroxide value, anisidine value and free fatty acid over time, in the pack and at the temperature the customer will use. In one lineThe oil's double bonds are the whole stability story: oxygen, light and warmth shorten the induction period, and the pack can slow the reaction but cannot stop it. ## The neat oil in its sealed pack The catalog moisture limit is ≤0.1%. That is a gate at filling, not a buffer for a humid store: water drives hydrolysis, hydrolysis raises free fatty acid, and an open drum in a damp room is no longer in the condition it was tested in. The 1 kg amber bottle and the 25 kg HDPE drum both need a closed liner and a dry store. Oxygen is the larger variable. Oxidation starts at the oil surface and continues in whatever air sits above it, so a full drum ages more slowly than one drawn down. A nitrogen blanket at filling displaces that air, but the flush has to be specified and checked. Once a pack is open, decant the remainder into a smaller container and use it within the agreed in-use period. Light is the third variable, and amber glass is not decoration: an oil in a clear bottle on a lit shelf oxidises through the glass. Warmth accelerates the same reactions, so a store next to a heater is a different condition from a temperature-controlled room. The three factors compound, and a warm, bright, part-used bottle is the hardest case. ## Blends, emulsions and softgel fills Flaxseed oil is not water-soluble and is not supplied as an aqueous solution. The systems that matter are oil blends, oil-in-water emulsions and softgel fills, and each changes the rate at which oxygen reaches the oil. In a blend, the least stable oil usually governs the induction period, so a small share of flaxseed oil can pull a mostly saturated blend down; measure the blend, not its components. In an emulsion the oil is dispersed into droplets, the interfacial area is large, and oxygen, light and trace metals meet the oil at the interface; the emulsifier, the pH and the antioxidant strategy outweigh the bulk oil's release result. A softgel shell limits oxygen transfer without stopping it, and it can carry moisture into the fill. Measure the fill at release and at the end of the study, and watch the shell for discolouration and leakage. A powder is a different system: the starch wall protects most of the oil, but free oil at the surface is exposed and moisture is a failure route. ## What moves the oil in storage What changes flaxseed oil during storage | Factor | Effect | Control | Oxygen | Raises peroxide value, then the anisidine value | Nitrogen blanket; low headspace; sealed pack | Light | Accelerates oxidation at the oil surface | Amber glass or an opaque secondary pack | Heat | Shortens the induction period; speeds hydrolysis | Cool store; short holds; no hot loading bay | Moisture | Drives hydrolysis and raises free fatty acid | Dry store; closed liner; ≤0.1% at release | Trace metals | Catalyse oxidation at very low levels | Stainless steel or glass contact; avoid iron and copper | Repeated opening | Replaces the headspace with air | Smaller packs; decant into a full container The factors reinforce one another: a part-used drum in a warm room combines heat, oxygen and a large headspace, and the result is worse than the effects measured separately. The useful question is not whether the oil is stable in the abstract, but for how long, in which pack and condition. ## A stability protocol for the oil A usable protocol fixes four things: the container, the climate, the sampling times and the tests. A common design uses 25 °C/60% relative humidity for long-term storage, 30 °C/65% RH as an intermediate condition and 40 °C/75% RH for accelerated storage. Add a light-exposure arm, because a dark incubator cannot reveal a photochemical failure, and include the customer's pack. Test peroxide value, anisidine value, free fatty acid, moisture and appearance at every point, and run the full fatty-acid profile at the first and last points to confirm that ALA and identity are unchanged. Tocopherols are worth measuring if the oil is sold on its minor fraction or if an antioxidant has been added. An induction period on a Rancimat or Oxipres instrument is a useful screen, but it ranks oils; it does not replace a storage study in the pack. Sampling has to be representative. A top-of-drum sample is not the same as one drawn after mixing, and a sample left open on a bench has started to oxidise before it reaches the laboratory. The protocol should say how the sample was taken, stored and how long it waited. ## What the finished formula does A softgel is the usual format, and the fill is the part that fails. Shell thickness, the plasticiser and the seam decide how much oxygen and moisture reach the oil, and a fill can turn before the shell shows anything. Measure the fill's peroxide and anisidine values, not only the capsule's appearance. An antioxidant can slow the reaction but cannot undo it. Mixed tocopherols, rosemary extract or another system should be named with its level in the specification, and adding tocopherol to an oil with a high peroxide value does not restore the specification. Decide the system before the stability study, not after a failing result, and check that the label reflects it. An emulsion adds the aqueous phase, the interface and a pH to control, and a dry blend adds the carrier and the risk of moisture migration. A stick pack needs its own study; the bulk oil's data does not transfer to a powder or a beverage, and neither does the softgel's. ## How the retest period is set We do not publish one shelf-life number for flaxseed oil, because the pack, the headspace and the storage condition set it. The retest period is supported by data for the pack the customer buys; a figure quoted without that pack and condition is an assertion. Before an extension, the retained sample is re-tested at the end of the period against the same limits: peroxide value, anisidine value, free fatty acid, moisture and appearance, with the profile checked at the end point. A bulk result does not transfer to a repacked bottle, a softgel or an emulsion. The documents should carry the lot, the production date and the retest date, and the buyer should confirm the remaining life on arrival. The catalog specification is on the flaxseed oil product page. The release tests are set out on the COA page, the packs and lead time are on the MOQ page, the test methods are indexed under analytical methods, and the release and retained-sample workflow is on the quality page. ### 04 Flaxseed oil: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/fatty-acids/flaxseed-oil/moq/ Reviewed: 2026-11-20 The MOQ for flaxseed oil is 1 kg, supplied in a 1 kg amber bottle; the bulk pack is a 25 kg HDPE drum. Lead time is 1–7 days on the standard pack. A firm quotation needs six pieces of information: grade and CAS number, the ALA window and oxidation limits, quantity and pack, destination and Incoterm, documents, and the intended market and use. In one lineOne kilogram is the smallest order because the amber bottle is the smallest pack that can be filled under nitrogen, sampled and traced as a single lot. ## Why the minimum is 1 kg A 1 kg bottle covers a bench-scale softgel or blend trial, a retained sample and an independent identity test, and it is small enough to ship as a parcel without a pallet. It is a commercial unit with a lot code, not a scoop from a drum, so the material in the trial and the material in the production order can be compared on paper. Below 1 kg the oil is normally split from a larger lot and repacked. That adds handling, replaces the original pack identity with a secondary one and makes traceability harder, while changing nothing about the chemistry. The 25 kg drum is the bulk unit: it reduces handling per kilogram but commits inventory and a longer storage period, and a part-used drum is a larger oxidation exposure than a part-used bottle. The minimum is set by the pack, not by a volume target. A buyer who needs 500 g for a trial is asking for a repack, and should say so rather than assume the catalog pack can be halved. ## Packs and handling Standard flaxseed oil packs | Pack | Net weight | Typical use | Notes | Amber glass bottle | 1 kg | Trial, sample, small batch | Light barrier; nitrogen flush on request; reseal after opening | HDPE drum | 25 kg | Production | Closed liner; lot code on drum, liner and certificate | Split lot | On request | Sub-kilogram trial | Repacked from a bulk lot; secondary pack identity The pack is an oxygen barrier as much as a container. An amber bottle protects the oil from light but holds a headspace that grows as the bottle is used; a drum holds more oil but a much larger headspace once it is drawn down. The nitrogen flush, if specified, belongs on the quotation and on the certificate rather than in a verbal assurance, because an unflushed bottle and a flushed one look identical. The microencapsulated powder is a separate product with its own pack sizes and minimum, described on the flaxseed oil powder page. A drum should be conditioned before pumping if it has been stored cold, and it should not be rolled or dropped, because the liner is the moisture barrier and a damaged liner is a slow leak rather than a visible failure. ## Lead time and dispatch The standard pack is quoted at 1–7 days after the order is confirmed. That window covers picking, nitrogen flushing where agreed, document preparation and dispatch; it does not include shipping transit, customs clearance or the customer's own quality release. A split lot, a non-standard pack or a batch-specific ALA window adds time, and the quotation should state it separately rather than folding it into the range. Ask for the dispatch date, not only the lead-time range. A 1 kg bottle usually moves as a parcel, while the 25 kg drum travels on a pallet; the Incoterm says who books the freight and who clears entry. The certificate and the rest of the lot documents should travel with the pack, not follow it, because an oil that arrives without its release record cannot be quarantined against a limit. ## What a quotation needs Six items make a quotation firm enough to compare: - Product and grade. Cold-pressed flaxseed oil, Linum usitatissimum seed, CAS 8001-26-1, with the process grade named. - Specification. The ALA window, linoleic and oleic ranges, free fatty acid, peroxide value, moisture and the anisidine limit if one is agreed. - Quantity and pack. 1 kg amber bottle, 25 kg HDPE drum, or a split lot. - Destination and Incoterm. The country and port or address, plus the trade term. - Documents. COA, specification, SDS and any market statement the importer needs. - Intended use and market. Softgel, blend, food or another use, and the market where it will be sold. A quotation that names “flaxseed oil” without the grade and the ALA window is incomplete, because two suppliers can meet it with oils that behave differently in the same softgel. Commercial terms are stated on the quotation; this page does not publish them. ## The sample is a lot, not a demonstration The 1 kg bottle is the qualification sample. Test identity, the full fatty-acid profile, free fatty acid and peroxide value before scaling, and keep a retained sample from the same pack. The lot code on the sample, the certificate and the quotation should match. An untraceable sample is a demonstration, not a qualification. Use the sample for a stability screen in the customer's own pack as well: fill a softgel or prepare the blend, and hold it at the intended storage condition. The bulk oil's release result says nothing about the shell, the headspace or the antioxidant in the finished formula. A sample that performs on the bench and fails in the pack has done its job if the failure was measured before the production order. A sub-kilogram trial is a split lot with its own handling record. Ask for the split in writing, keep its secondary lot code with the trial results, and do not present it later as the 1 kg catalog bottle. ## Terms to settle before the first order The quotation and the quality agreement should sit on the same page: Incoterm, pack, dispatch window, the specification revision, a COA for each lot, the retained sample, the retest period and the route for a change of grade or pack. Settle those before the first production order; the same conversation is harder after a dispute. If a lot misses the agreed specification, the route is the retained sample and a joint re-test against the named method, not a photograph of the bottle. The agreement should name the referee laboratory both sides accept and how a result is handled. Because flaxseed oil moves on storage, the agreement should also state the remaining shelf life expected at delivery and what happens if the anisidine value has moved by then. The catalog specification is on the flaxseed oil product page. The release tests are on the COA page, the grade choice is on the grades page, the market documents are on the compliance page, the test methods are indexed under methods, the release workflow is on the quality page, the term is defined in the MOQ glossary entry, and shipping is covered on the logistics page. ### 05 The regulatory file for flaxseed oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/flaxseed-oil/compliance/ Reviewed: 2026-11-20 Flaxseed oil is an ordinary food ingredient with a long history of use, so the regulatory question is not whether the oil is permitted but how the finished product is positioned in the destination market. The buyer's regulatory team confirms that route; this page lists the documents, limits and label points that belong in the file, so the specification and the commercial pack can be reviewed together. In one lineThe oil is a traditional food ingredient; the destination decides the contaminant limits, the claim wording and the documents that must sit behind the label. ## What the file contains The file has to hold four things at once: the specification version for the oil, the certificate that releases the lot, the limits and label rules for the finished product, and the record of how source, process and pack changes are handled. The COA reports the lot, the specification states the grade and the release limits, and the SDS covers handling. None of them settles the destination route, which is recorded separately. The file also needs the statements a buyer's quality team asks for at supplier approval: allergen, GMO, country of origin, residual solvent, trans fat and, where relevant, organic certification. If one is missing for the lot, name the gap before the order moves. A versioned document list at the front of the folder saves a week later. ## European Union Cold-pressed flaxseed oil has a documented history of use before 1997 and is not a novel food, so the file starts from ordinary food law rather than from an authorisation. Labelling follows Regulation (EU) No 1169/2011, and a food supplement follows Directive 2002/46/EC, which requires a nutrition declaration on the finished product. The ALA amount per serving is declared on that basis, and the source appears in the ingredient list. Contaminants are governed by Regulation (EU) 2023/915, as of this review, and the applicable maximum depends on the food category and on the daily dose. The “cold-pressed” description is a process statement rather than a defined legal category, so it is supported by the press record rather than by a certificate line. Organic is a separate certification and is not implied by cold pressing. ## United States In the United States, flaxseed oil is sold as a conventional food or as a dietary supplement ingredient, and it was on the market before 1994, so it is not a new dietary ingredient. The finished product is the brand's responsibility: current good manufacturing practice under 21 CFR 111, the Supplement Facts panel for a supplement, and the labelling rules in 21 CFR 101 for a food. Structure/function statements are reviewed on their own, with substantiation and the DSHEA disclaimer, and no disease claim is open. Flaxseed is not on the US major-allergen list, so the oil itself does not trigger a declaration; the carrier of a powder and the other ingredients of the finished product still have to be assessed. State-level requirements, such as California's Proposition 65, sit on top of the federal position and are confirmed for each product. ## Contaminants and limits The panel has to be calculated for the finished product, not just read from the drum. The table below is the usual starting point for a supplement file; the current destination text and the daily dose decide the final limit. Contaminant limits to confirm for the finished product | Parameter | Typical supplement reference | What the file should show | Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method, limit and the finished-product calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception that applies | Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result and method | Arsenic (As) | Customer or market limit | The agreed limit and the method, stated on the certificate The oxidation limits are specifications, not regulatory maxima, but they belong in the same review: a product that meets the metal panel and carries a stale oil is a quality failure even when it is legally compliant. Free fatty acid, peroxide value and the anisidine limit should be visible in the file, because the finished-product shelf life depends on them. ## Claims and the label Claims sit in a review of their own. In the EU, as of this review, a health claim may be used only if it is authorised, and the register entry for alpha-linolenic acid sets the exact wording and a minimum intake of 2 g per day; a product below that intake cannot carry it, and the wording is not paraphrased. Nutrition claims for omega-3 have their own thresholds per 100 g and per 100 kcal, which a small softgel often does not reach, so the label states the ALA amount per serving instead of claiming the nutrient. In the US, a structure/function statement needs substantiation and the DSHEA disclaimer, and it must not describe a disease. In both markets, no disease-related claim is made for this material, and this site publishes the specification rather than a claim. The label must match the form that was ordered: an unrefined oil cannot be labelled refined, and a powder must declare its carrier. ## Documents for the file The buyer's file needs the COA with the GC fatty-acid profile and its basis, free fatty acid, peroxide value, moisture, the metal panel and the microbiology count; the specification with the grade, the ALA window and the pack; the TDS and SDS; the allergen and GMO statements; the country of origin; the residual-solvent statement; and the trans fat figure where the market asks for it. For the powder, add the carrier identity and its source, and the oil load. The flaxseed oil product page carries the catalog specification, and the identity page sets out the analytical evidence behind it, with the tests indexed under methods. The EU, US and UK notes collect the framework references, and the quality page describes the release file. ## Checklist before the first order - Specification version, grade, CAS number and ALA window are named. - The COA, TDS, SDS, allergen, GMO, origin and residual-solvent statements are all present. - Each result is converted to the finished-product dose. - Oxidation limits and the anisidine decision are in the specification, not only in the email. - The label, the nutrition declaration and the claim have been reviewed for the destination. - The quote, the specification and the certificate all carry the same version. A file built this way answers the questions a distributor or an authority reviewer will ask, and it keeps the grade, the pack and the label tied to the lot actually shipped. ### 06 How we prove a lot is flaxseed oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/flaxseed-oil/identity/ Reviewed: 2026-11-20 A flaxseed oil lot is the declared material when four lines agree: the paperwork names the species, plant part and grade, the GC fatty-acid profile sits inside the catalog ranges, the sterol and tocopherol pattern is consistent with flaxseed, and the condition figures show a fresh oil. ALA alone is a weak proof, because perilla and chia oils can land in the same window. The minor components carry the specific information. In one lineIdentity is the profile plus the minor components: ALA and linoleic acid place the oil in a family, and the sterols and tocopherols separate it from the oils that can copy that family. ## The identity layers Start with the paper: species, plant part, process grade and lot. “Linseed oil” and “flaxseed oil” are two trade names for the same material, so the botanical name is the identifier that survives a translation. The fatty-acid profile then places the oil in a family, and the minor components carry the specific information. Condition figures test freshness and the grade claim. Four identity checks for flaxseed oil | Check | Question | Evidence | What it establishes | Paperwork | Is the material named? | Species, plant part, process grade and lot | Paperwork match | Fatty acids | Does the profile fit? | GC-FAME of the full profile | The oil family | Minor components | Is the fingerprint flaxseed? | Sterol and tocopherol patterns | Authenticity | Condition | Is it fresh and the claimed grade? | Free fatty acid, peroxide value, anisidine value, colour and press record | Handling and grade Each check is easy on its own and harder to satisfy together. A profile can be copied from a specification; a chromatogram with the column, the standard and the integration cannot. A sterol table can be quoted from a textbook; the same table on the same lot as the fatty-acid result is much harder to produce. ## The ratios that carry the identity With ALA at 45.0–65.0% and linoleic acid at 12.0–20.0%, the ALA-to-linoleic ratio usually falls between 2.3 and 5.4. That is a useful first filter: sunflower, soybean and rapeseed oils sit far below it, so a blend built from them has to add a concentrated n-3 source before it can reach the flaxseed window, and the addition is what the ratio exposes. The ratio cannot confirm the oil. Perilla seed oil carries ALA in the same range and linoleic acid close to it, and chia oil is similar; both can pass an ALA check. The ratios also move with the crop, so a narrow band will fail a normal season. Use the ratio to exclude, then use the minor components to confirm. Flaxseed oil is rich in γ-tocopherol rather than α-tocopherol, and its sterol fraction is dominated by β-sitosterol with campesterol, stigmasterol and Δ5-avenasterol alongside. Those patterns are not unique on their own either, but together with the fatty-acid profile and the botanical record they are a specific fingerprint. A blend that matches the ALA figure usually fails one of them. ## Why X-ray diffraction does not identify an oil A crystal lattice is what X-ray diffraction measures. A liquid oil has none, so the measurement returns a broad amorphous halo rather than a pattern that can name the oil or measure its fatty acids. XRD is not a release test for flaxseed oil. It is useful one step away from the oil. In a microencapsulated powder, diffraction can characterise the carrier — how crystalline the starch is, and whether the wall is the material the supplier declared. For a solid isolate sold alongside the oil, a diffraction pattern, a melting range and an NMR spectrum are the identity evidence. For the oil itself, GC and the minor-component assays remain the tools; the XRD method note explains where the technique fits. ## What adulteration looks like Common flaxseed oil substitutions and the signals | Route | What changes | Test | Sunflower, soybean or rapeseed blend | ALA falls, linoleic and oleic rise; sterols shift | GC profile plus sterol pattern | Perilla or chia oil substitution | ALA stays in range; the sterol pattern and the species record differ | GC profile plus sterols plus botanical record | Refined oil sold as cold-pressed | Colour paler; tocopherols reduced; free fatty acid and peroxide lower | Tocopherols, colour and press record | Oxidised oil blended with fresh | Peroxide and anisidine values high; odour stale | Peroxide value, anisidine value, sensory check | Added free ALA or an ester | Free fatty acid rises; the lipid class profile changes | Free fatty acid, lipid class analysis Colour is the easiest thing to fake and the weakest evidence. A golden tone can come from the seed, the press, a blend or an added colour. The sterol and tocopherol patterns are harder to reproduce, and the oxidation pair is the one adulteration route that the identity tests miss entirely: an oil can be the right species and still be stale, so condition is read at the same time as identity. ## Writing identity into the specification Keep the identity clauses beside the composition rather than in a separate document. Name the species and plant part, the process grade and the lot. Add the ALA, linoleic and oleic ranges with the GC method and the basis, and require the full profile rather than one peak. Where authenticity matters, add the sterol and tocopherol patterns and the press record. Keep free fatty acid, peroxide value, anisidine value, moisture and appearance as condition lines, and require the lot code and retained sample. Two problems recur. One is a window so tight that an ordinary crop cannot meet it. The other is an ALA figure with no stated basis, so the reader cannot tell whether it refers to total fatty acids or to oil mass. The catalog ranges are wide enough for crop variation, and the COA page sets out the reporting format. ## Questions that produce evidence - Will you send the GC chromatogram for this lot, with the column, standard and integration? - What are the ALA, linoleic and oleic results, and on what basis are they expressed? - Can you show the sterol and tocopherol patterns for the same lot? - What were free fatty acid, peroxide value and anisidine value at release, and what storage history does the lot have? - What record supports the cold-pressed claim, and which species and plant part were pressed? - If the lot is disputed, will you accept a joint re-test of the retained sample? Documents behind each answer make an identity file; a certificate and a percentage on their own make a summary. The catalog specification is on the flaxseed oil product page; the grade choice is on the grades page; the oil-versus-powder comparison is on the level-four page; the methods index explains the tests; and lot release is described on the quality page. ### 01 What the COA for MCT oil actually contains URL: https://nutrition.rainwoodbio.com/products/fatty-acids/mct-oil/coa/ Reviewed: 2026-11-20 The certificate for an MCT oil lot reports the GC fatty-acid profile, with caprylic acid (C8:0) at 55.0–65.0% and capric acid (C10:0) at 35.0–45.0%, free fatty acid at ≤0.10%, peroxide value at ≤1.0 meq O₂/kg and moisture at ≤0.1%, beside the heavy-metal panel and microbiology. Each line needs a method, a release limit and a separate column for what the laboratory measured. The limits below are the catalog specification; only the lot certificate speaks for the oil in a particular bottle or drum. In one lineAn MCT certificate is a fatty-acid profile plus a condition: C8 and C10 say what the oil is, while free fatty acid, peroxide value and moisture say how it has been kept. ## The certificate as a test report An oil certificate is short, and easy to read too quickly. The appearance line is a handling check, not an identity test; the identity line is the profile, not a single C8 number. The quality lines are free fatty acid, peroxide value and moisture; everything else is contaminant or hygiene data. Identity, quality and contaminant tests · MCT oil | Parameter | Method | Release limit | Identification | GC fatty-acid profile | Profile conforms to the reference | Caprylic acid (C8:0) | GC of the methyl esters | 55.0–65.0% of fatty acids | Capric acid (C10:0) | GC of the methyl esters | 35.0–45.0% of fatty acids | Free fatty acid | Titration, reference acid named | ≤0.10% | Peroxide value | Iodometric titration | ≤1.0 meq O₂/kg | Moisture | Karl Fischer | ≤0.1% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Enumeration and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent ## What each number is measured against The fatty-acid profile is reported as a proportion of the fatty acids, usually by area normalisation of the methyl esters. C8 at 60% means that 60% of the fatty-acid chains are caprylic; it does not mean the oil contains 60% free caprylic acid. Almost all of the acid is esterified to glycerol, so the free fatty acid figure is a separate, much smaller test. The two ranges do not have to sum to 100%. 65% and 45% together make 110%, so a lot near the top of both ranges has almost no balance left for other chains. The lot still sums to 100% of its fatty acids, with the shortfall met by C6, C12, C14 and C18. A certificate should show the full scan so the balance is visible. Free fatty acid needs its reference acid. Titration reports acidity as a named fatty acid, and MCT contracts use more than one. The same acidity reads about half as high when expressed as caprylic acid rather than oleic, because the calculation carries the molecular weight of the reference acid: 144.21 against 282.46. A limit of 0.10% as caprylic therefore allows about twice the acidity of 0.10% as oleic. Write the reference acid beside the limit. Peroxide value is iodometric and reported as milliequivalents of active oxygen per kilogram. It measures primary oxidation products, not the secondary aldehydes a sensory panel detects. Moisture is Karl Fischer and is the gate for hydrolysis: water plus heat splits the triglyceride and raises the free fatty acid. ## Release limit versus batch result One column holds the gate the lot had to meet; the next holds what the laboratory found. A column that simply repeats the gate tells the reader nothing about the lot. The result side of the certificate | Parameter | Release limit | Result column | Caprylic acid | 55.0–65.0% | A measured percentage with the GC method | Capric acid | 35.0–45.0% | A measured percentage from the same run | Free fatty acid | ≤0.10% | A measured percentage, with the reference acid | Peroxide value | ≤1.0 meq O₂/kg | A measured value in meq O₂/kg | Moisture | ≤0.1% | A measured percentage by Karl Fischer Two results deserve a second look even when they pass. A peroxide value of 0.8 meq O₂/kg is inside the 1.0 limit and leaves little headroom for a slow sea freight; ask the age and the storage history of the lot. A free fatty acid result of 0.09% also passes, and points to a hydrolysis step somewhere in the process. ## What moves between batches Source and cut move the profile. Coconut oil and palm kernel oil are the usual raw materials; the fractionation cut decides how much C8 and C10 is taken, and a different cut moves both figures inside the range. Re-esterification with glycerol then rebuilds the triglyceride, and the completeness of that step shows in the carbon-number distribution. Free fatty acid moves with moisture and heat: a wet drum, a warm warehouse or a long hold. Peroxide value moves with oxygen, light, trace metals and time; a drum with a large headspace and repeated openings has a different storage history from a sealed one. Moisture moves with the seal and with condensation after a cold journey. Colour tells the least and often reveals the most. A darker oil can be an older lot, a different bleaching step or an oxidation product while the profile still passes, so read a colour shift as a question, not a rejection. A trend across lots is more useful than one result near an edge: C8 drifting to the boundary, peroxide value climbing, or free fatty acid rising. The lot code should trace from the bottle to the drum to the file sample. ## When to order an outside test An outside laboratory earns its place when qualifying a new supplier, clearing a first consignment into a regulated market, testing a claim the certificate cannot support, or resolving a dispute. The panel: GC fatty-acid profile, triglyceride carbon-number distribution, free fatty acid with its reference acid, peroxide value, moisture and heavy metals by ICP-MS. For a refined lauric oil, add 3-MCPD and glycidyl esters, and the PAH panel where relevant. Add anisidine value if secondary oxidation is the concern. Ask for the detection limit on every screen; a “not detected” entry without one describes the method, not the oil. Chain of custody matters as much as the panel: the material tested should be the material retained, and the report should quote the lot code. If a finding is disputed, send the referee laboratory the retained sample, the certificate and the agreed specification, and ask which cause the result supports rather than repeat the same assay. ## A side-by-side comparison Six lines belong in a comparison table: source and cut; the C8 and C10 results plus the full scan; free fatty acid with its reference acid; peroxide value with the date of analysis; moisture; and the pack, its headspace and its lot code. Two quotations that agree on C8 but differ on the reference acid or the age of the lot are not describing the same oil. The certificate should name who refined and re-esterified the lot, the fractionation cut, the nitrogen status of the drum and what the shelf-life statement covers. The catalog specification sits on the MCT oil product page. The carrier form is specified on the MCT powder page; the analytical methods are described in the methods section; the quality page sets out how a lot is released. ### 02 MCT 60/40 or a C8-enriched cut: choosing a profile URL: https://nutrition.rainwoodbio.com/products/fatty-acids/mct-oil/grades/ Reviewed: 2026-11-20 MCT oil is sold by its C8/C10 cut, not by a single purity figure. The catalog grade is a 60:40 oil with caprylic acid at 55.0–65.0% and capric acid at 35.0–45.0% of the fatty acids; a C8-enriched cut shifts the ratio toward caprylic and changes the viscosity, the cloud point and the mass of each acid that a gram of oil delivers. The oil-versus-powder question is a carrier decision rather than a grade, and it is handled on its own page. In one lineThe C8/C10 ratio is the grade: it changes the oil's viscosity, its cloud point and the mass of each fatty acid that a declared dose delivers. ## Why an MCT is a cut, not a molecule Medium-chain triglycerides are a family, not a single substance. The commercial oil is made by hydrolysing a lauric oil, fractionating the fatty acids to take the C8 and C10 fraction, and re-esterifying that fraction with glycerol. The cut is the real specification: how tightly the fractionation holds to C8 and C10, and how much C6, C12 or C14 is allowed to pass through with them. Coconut oil and palm kernel oil are the usual sources. Neither fixes the ratio by itself, because the fractionation decides it, and the same source can yield a 60:40 oil or a C8-dominant one. That is why a purchase order that names “MCT oil” without ranges has named a category, not a material. Chain length then drives the physical behaviour. Caprylic acid has eight carbons and capric has ten, and the shorter chain gives a less viscous triglyceride that stays fluid at a lower temperature. A C8-rich cut pours more freely and resists clouding; a C10-rich cut is thicker and clouds sooner. Neither is purer than the other, and neither is automatically the better choice. ## The cuts side by side MCT cuts · the catalog 60:40 grade against two C8-enriched options | Line | Catalog 60:40 | C8-enriched, about 70:30 | C8-dominant, ≥90% C8 | Caprylic acid (C8:0) | 55.0–65.0% | About 70% | ≥90% | Capric acid (C10:0) | 35.0–45.0% | About 30% | ≤10% | C8:C10 ratio | 1.2–1.9 : 1 | About 2.3 : 1 | 9 : 1 or higher | C8 per gram of oil | 550–650 mg | About 700 mg | ≥900 mg | C10 per gram of oil | 350–450 mg | About 300 mg | ≤100 mg | Viscosity at 20 °C | About 25–33 mPa·s | Lower | Lowest of the three | Cold behaviour | Clouds in a cold store | More cold-tolerant | Stays clear longest | Typical use | General softgel and blend work | Thinner oil, higher C8 per gram | Maximum C8 per gram The enriched columns are indicative profiles quoted against their own specification. The grade supplied here is the 60:40 oil; the other cuts are made on request and carry their own COA. ## Viscosity, density and cold behaviour Viscosity is the property formulators notice first. The catalog oil runs at roughly 25–33 mPa·s at 20 °C, thinner than most seed oils, which is why it fills a softgel easily and disperses into an emulsion with less energy. Density is about 0.93–0.96 g/mL at 20 °C, so a 1 g fill is a little over 1 mL. MCT oil is insoluble in water and miscible with most fats and oils; it is soluble in ethanol and in the usual organic solvents. In water it does not dissolve, it disperses as droplets once emulsified. That distinction decides the format: a clear drink needs an emulsion or a powder, and an oil layer on the surface is not a solution. Cold behaviour is physical and reversible. A cold warehouse or a winter journey can cloud the oil or set a fraction; warming it to about 20 °C and mixing restores a clear oil, and the change is not a quality failure. The pack should not be opened while cold, because condensation on the oil is water, and water is the hydrolysis route to free fatty acid. Mouthfeel follows the chain length too. The shorter chains give a lighter, less coating sensation than a long-chain oil, which is why the 60:40 oil is used in beverages and fillings where a heavy fat layer is unwanted. ## The ratio as label arithmetic The profile is also the label arithmetic. At the floor of the catalog range, 1 g of oil delivers 550 mg of C8 and 350 mg of C10, a total of 900 mg of the two declared acids. At the top of the range it delivers 650 mg and 450 mg. A label that declares 5 g of MCT oil therefore declares between 2.75 g and 3.25 g of C8 and between 1.75 g and 2.25 g of C10. When the label declares an individual acid rather than the oil, the calculation runs the other way: divide the declared mass by the release floor, not by the midpoint. A 3 g C8 declaration needs at least 3 ÷ 0.55 = 5.45 g of oil at the floor; at the top of the range the same declaration needs 4.62 g. Using the floor keeps the label true across lots. A softgel fill is set by volume and density. A 1 g fill is about 1.06 mL at 0.94 g/mL; a capsule that holds 0.9 mL holds about 0.85 g of oil. Check the fill against the density of the lot rather than a generic figure, and remember that these are composition figures, not an intake recommendation. ## What to write into the specification The cut has to be written as testable lines. A line that says “MCT oil” without a ratio and without the full scan leaves the dilution question open. - “Medium-chain triglycerides, CAS 73398-61-5, source declared.” - “Caprylic acid 55.0–65.0% and capric acid 35.0–45.0% of total fatty acids by GC; report the full scan.” - “Free fatty acid ≤0.10%, with the reference acid named.” - “Peroxide value ≤1.0 meq O₂/kg; moisture ≤0.1%.” - “Lauric acid limit, where a coconut-oil dilution has to be excluded, agreed as a separate line.” - “Source, fractionation cut and nitrogen status of the pack.” The last line is not decoration. A C8-enriched oil made by adding pure C8 is a different specification rather than an adulteration, but it is not the catalog cut, and the certificate should say what was done instead of only the final percentage. ## When a different cut is the wrong choice If the formula was built on the 60:40 oil, a C8-dominant cut is not a drop-in. It is thinner, it delivers more C8 per gram, and it moves the fill weight and the label arithmetic. If the label names a ratio, check that the specification delivers the ratio as a range and not only as two separate acid ranges that can both drift. If the product is a powder, the C8/C10 question stays with the oil inside the powder, but the carrier and the oil load decide the dose. That comparison is on the MCT oil vs MCT powder page. The catalog limits sit on the MCT oil product page; the powder is specified on its own page; the GC method is described in the methods section; the release file is on the quality page. ### 02.1 MCT oil vs MCT powder: the carrier, the flow and the label URL: https://nutrition.rainwoodbio.com/products/fatty-acids/mct-oil/grades/mct-oil-vs-mct-powder/ Reviewed: 2026-11-20 MCT oil and MCT powder carry the same triglyceride at different concentrations in different matrices. The oil is all lipid; the powder is typically half oil dispersed in a modified starch carrier. A softgel or an oil blend takes the oil directly, while a stick pack, a dry blend or a beverage takes the powder for its flow and its dispersion. The carrier, the flow and the label arithmetic follow from that difference. In one lineMCT oil is all lipid; a 50% MCT powder is half oil on a starch carrier, so the same gram delivers a different dose and a different label. ## Two forms of the same oil The oil is a clear liquid at room temperature, specified by its C8/C10 profile, with free-fatty-acid and peroxide limits. The powder is a free-flowing solid at a declared oil load, usually 50%, with the same C8/C10 ranges expressed on the oil. Both are food ingredients, and neither is a diluted grade of the other in the sense that a lower assay would be. The powder is dispersible, not soluble. In water the starch wall hydrates and releases the oil as droplets; the oil itself does not dissolve. That is the physical difference a formulator sees in the glass, and it is the reason a clear drink needs an emulsion while a cloudy one can take the powder. The oil carries no carrier and no carbohydrate. The powder carries both, and the carrier is part of the specification, the ingredient list and the allergen review. ## The carrier is the difference The powder's wall is usually a modified starch. Its type, its inclusion rate and its regulatory status belong in the file, not in a footnote. A carrier that is an authorised additive in one market may need a different justification in another, and a change of carrier is a material change even when the oil inside is identical. The carrier is also why a powder can be declared with carbohydrate. The oil contributes fat and saturates; the starch contributes carbohydrate, and the two lines move together with the oil load. At 50%, 2 g of powder carries about 1 g of oil and about 1 g of carrier, so both the nutrition panel and the ingredient list reflect the matrix. The oil has none of that. Its label is shorter, its fat declaration is simpler, and a formula that has no room for starch can use the oil without reformulating around a carrier. ## How each form moves through a line Handling and flow · MCT oil against 50% MCT powder | Property | MCT oil | 50% MCT powder | Physical form | Clear liquid | Free-flowing powder | Dosing line | Softgel, liquid fill, emulsion | Stick pack, capsule fill, dry blend | Mixing | Pourable; needs an emulsion for water | Blends dry; disperses in water | Mouthfeel | Light oil layer | Starch body; less oiliness | Oxidation exposure | Surface and headspace | Surface oil on the particle | Standard pack | 1 kg bottle, 25 kg drum | 1 kg pouch, 25 kg drum Flow is the reason many projects choose the powder. A dry blend line can weigh and fill a powder with the same equipment it uses for the rest of the formula; the oil needs a different line, a different fill and a different cleaning regime. The powder also travels through a stick pack, where a liquid fill would need a sealed sachet and a different machine. The oil's advantage is the opposite one: it needs no carrier, it disperses into an oil phase without a drying step, and a softgel line can fill it directly. It also has the higher dose per gram, which matters when the capsule or the sachet has a fixed fill weight. ## The dose arithmetic changes with the form One gram of oil is one gram of lipid; 2 g of a 50% powder is 1 g of oil and 1 g of carrier. A 500 mg softgel holds 500 mg of oil, while a 1 g stick of the 50% powder holds 500 mg. The C8 content then follows the profile: 500 mg of oil carries 275–325 mg of C8 at the catalog range. MCT delivered per serving · oil against 50% powder | Declared MCT | As oil | As 50% powder | 1 g | 1 g | 2 g | 5 g | 5 g | 10 g | 500 mg of C8 at the 55% floor | 0.91 g | 1.82 g The error to avoid is comparing the two by weight. Two grams of powder is not two grams of oil, and a label that declares 5 g of MCT as the powder needs 10 g of the 50% grade. That extra mass has to fit the capsule, the stick or the serving, and it brings the carrier with it. ## What the label has to say The oil is declared by its name and its fat. The powder is declared as the powder, with the oil and the carrier in the ingredient list, and it adds carbohydrate. In the EU the nutrition declaration carries fat and saturates at 9 kcal/g and the carbohydrate from the carrier; in the US the panel is Nutrition Facts or Supplement Facts depending on the product type. The C8/C10 split is not a nutrition line in either market; it belongs in the ingredient description or the specification. The source is part of the label review. A coconut-derived oil raises the US tree-nut question, and the refined-oil exemption has to be documented rather than assumed; the EU list does not include coconut, but the source statement still belongs in the file. The powder adds the carrier's own status and, where relevant, its allergen or GMO position. A claim does not become easier in either form. The oil is a fat, and the powder is a fat plus a carbohydrate; neither carries a disease claim, and a structure/function statement needs the evidence and the wording the market allows. ## Choosing the form Choose the oil when the format is a softgel, an oil blend, a liquid fill or an emulsion, and when the label has no room for a carrier. It is the simpler declaration and the higher dose per gram. Choose the powder when the format is a stick pack, a dry blend or a beverage, when the line cannot handle a liquid, or when the mouthfeel of an oil layer is unwanted. Neither form is better in general. The dose, the pack and the process decide, and the two specifications should be compared on the oil they deliver, not on the weight of the material. The oil is specified on the MCT oil product page; the powder on the MCT powder page; the GC profile is described in the methods section; the quality page sets out how a lot is released. The grades page covers the C8/C10 cut, and the COA page shows how each figure is reported. ### 03 MCT oil is slow to oxidise, so the pack sets the shelf life URL: https://nutrition.rainwoodbio.com/products/fatty-acids/mct-oil/stability/ Reviewed: 2026-11-20 MCT oil is a saturated lipid and oxidises far more slowly than a seed oil, so the usual failure is not fast rancidity. It is a slow drift in peroxide value and free fatty acid, driven by heat, light, moist headspace and repeated opening of the pack. A sealed HDPE bottle or drum at ambient temperature is the practical format; the retest period comes from data generated in that pack, not from the certificate. In one lineMCT oil is saturated and slow to oxidise, so the shelf life is decided less by rancidity than by hydrolysis, headspace and the seal on the pack. ## The oil in the pack: moisture, headspace and light The catalog moisture limit is ≤0.1%, and that is a release gate as well as a storage condition. Triglycerides hydrolyse when water is present, and heat drives the reaction; every tenth of a percent of free fatty acid that appears in storage has been split off the glycerol backbone. A drum opened in a humid room and closed without a dry headspace has a different storage history from a sealed one. Condensation is the trap. A cold drum brought into a warm room forms water on the inside of the closure and on the oil surface, so let the pack equilibrate before opening it. HDPE is a good moisture barrier and a poor light barrier, so the pack also belongs in the dark. The 1 kg bottle and the 25 kg drum share the closure problem; the drum has more oil and more headspace, while the bottle is opened more often. Nitrogen blanketing on request replaces the air in the headspace with an inert gas. It slows the peroxide value at the surface, but it does not replace a tight closure, and it does not survive a drum that is opened every week. ## When the oil becomes an emulsion The oil does not dissolve in water, so a beverage or a liquid supplement carries it as an emulsion. That changes the failure modes. The oil phase can oxidise at the droplet surface, the interface is exposed to oxygen and to metal ions, and the emulsion itself can cream or separate. A bulk oil stability result is the starting point, not the answer. Heat is the process variable to watch. Pasteurisation and hot fill add a heat load that a softgel fill never sees; the same oil can pass a 24-month ambient study and still fail in a hot-filled drink. Validate the process and the hold time in the matrix, with the emulsifier and the pH that the formula actually uses. The powder is a different matrix again. There the oil is dispersed in a starch wall, and the wall rather than the oil controls moisture and surface oxidation. That case is covered on the MCT powder stability page. ## What drives the change Factors that move MCT oil during storage | Factor | What it does | Control | Oxygen | Raises peroxide value; secondary aldehydes follow | Low headspace; sealed pack; nitrogen where agreed | Light | Accelerates oxidation at the oil surface | Dark store; opaque or light-resistant outer pack | Heat | Accelerates oxidation and hydrolysis | Cool store; controlled process temperature | Moisture | Hydrolysis; free fatty acid rises | Dry headspace; sealed closure; equilibrate before opening | Trace metals | Iron and copper catalyse oxidation | Stainless or lined contact; avoid copper fittings | Antioxidant | Slows oxidation until it is depleted | Declared tocopherol, if the formula uses one The factors reinforce one another. A warm, bright store and a half-empty drum bring heat, light and a wide oxygen surface together, and the damage is greater than any single one would cause. The useful question is not whether MCT oil is stable in general, but how long it stays inside specification in a named pack and a named store. ## A stability protocol for the oil Name the pack, the chamber condition, the sampling times and the test panel before the first sample goes in. The warehouse is covered by 25 °C/60% relative humidity with an intermediate arm at 30 °C/65% relative humidity; 40 °C/75% relative humidity is the stress condition for the pack. Add a light-exposure arm, because a dark incubator will never show the failure that a bright shelf produces. At each point measure peroxide value, free fatty acid, moisture, appearance and the fatty-acid profile. A profile that moves is a contaminated sample or an analytical error, not a storage effect. For a formula, add the matrix tests - emulsion stability, colour, flavour and the active the oil carries - and report each result instead of a pass line, with the pack, the lot family and the analysis date named. Ask for the summary that matches the pack you will buy. The drum and the bottle differ in headspace, in how often they are opened and in surface-to-volume ratio, so one does not describe the other. ## The finished formula changes the answer A softgel is a closed system with a shell, a plasticiser and a fill. The shell can lose or gain water with the store, and the fill can migrate into the shell; the oil itself is rarely the limiting component. A stick pack or a sachet of an oil blend fails at the seal, where a pinhole is enough. When the oil is a carrier for a fat-soluble active, the active may set the shelf life. A vitamin or a carotenoid can degrade faster than the oil, and the specification should say that the oil is the carrier, not the subject of the study. Adding tocopherol to protect the oil is a formula change: it needs a line on the specification and, in some markets, a declaration on the label. Emulsions add a physical shelf life on top of the chemical one. Creaming, flocculation and separation can end a product's life while the peroxide value is still well inside its limit, so the two have to be measured together. ## How the shelf life is set No single shelf-life figure is published for MCT oil, because the pack and the store set it. The retest period on the specification is the number that counts, and it rests on stability data generated in that pack. A figure that names no container, no storage condition and no test panel asserts rather than supports. Test the retained sample again before extending use beyond the retest period. Do not assume an extension, and do not transfer a bulk figure to a repacked bottle: the new container brings a new headspace and a new opening history, even when the oil is the same lot. Standard packs are listed on the MCT oil product page; the release tests are described on the COA page; the MCT powder page covers the carrier form; the methods section describes the peroxide and free-fatty-acid tests; the quality page sets out how a lot is released. ### 04 MCT oil: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/fatty-acids/mct-oil/moq/ Reviewed: 2026-11-20 MCT oil is packed in a 1 kg HDPE bottle and a 25 kg HDPE drum, and the minimum order is one bottle. Standard packs leave within 1–7 days of order confirmation. A firm quotation needs the C8/C10 ranges, the free-fatty-acid basis, the quantity and pack, the destination and Incoterm, the document set and where the oil will be used. In one lineOne kilogram is the smallest unit that can be sealed, sampled and traced as a single lot; the drum changes the handling and the headspace, not the specification. ## Why the minimum is 1 kg The bottle is the qualification unit. One kilogram covers a bench trial, a retained sample and an independent test, and it flies without a pallet. It is filled and sealed as a lot, so the code on the label belongs to that oil rather than to a drum someone scooped from. Below a kilogram the oil is decanted from a larger lot, which adds handling and breaks the link between the pack and the original lot. The drum is the production unit: fewer containers per tonne, but a bigger headspace and a longer open life. A buyer who needs 2 kg is better served by two bottles and one unopened reserve than by a drum that stays half empty. The minimum is therefore a packing fact. It is not a volume incentive, and it is not a statement about the commercial terms of the oil. ## Packs and formats Standard MCT oil packs | Pack | Net weight | Typical use | Notes | HDPE bottle | 1 kg | Trial, sample, small batch | Induction seal; close after pouring; keep in the dark | HDPE drum | 25 kg | Production | Larger headspace; note the date of first opening | Nitrogen-blanketed drum | 25 kg | Long storage | On request; protection ends when the drum is opened | Split pack | 1–5 kg | Bench work | Decanted from a bulk lot; carries its own code Both standard packs are food-grade HDPE. The plastic keeps water out and lets light through, so the drum belongs in a dark store, and the closure is the part that fails first. Check the liner and the seal on arrival: an oil pack opened in transit is no longer a sealed lot. The catalog form is oil. A carrier-borne powder has its own specification and is not a packing option; the carrier form is specified on the MCT powder page. ## Lead time and dispatch Standard packs are dispatched 1–7 days after order confirmation. The clock covers picking, paperwork and handover to the carrier, not the transit, the customs entry or the customer's own release. A nitrogen-blanketed drum or a split pack is scheduled separately. Ask for a dispatch date rather than the range. The bottle usually travels as a parcel and the drum on a pallet, and the Incoterm decides who books the freight and who handles customs entry. Send the COA and the other lot documents with the consignment rather than after it. ## What a quotation needs Six details turn a quotation into something two suppliers can be compared on: - The cut. Medium-chain triglycerides, CAS 73398-61-5, with C8 and C10 written as ranges. - The test basis. Free fatty acid with its reference acid, peroxide value, moisture, metals and microbiology. - The pack. 1 kg bottle, 25 kg drum, nitrogen-blanketed drum or split. - The route. Destination country, port or address, and the trade term. - The paperwork. COA, specification, SDS, source and allergen statement, and any market-specific document. - The use. Supplement, food or another application, and the country where the finished product will be sold. A quote that leaves out the reference acid or the market cannot be compared with another. Commercial terms belong on the quotation itself, not on this page. ## The sample is a packed lot The bottle is the sample. Run the GC profile, free fatty acid, peroxide value and moisture on it before committing to a scale-up, and keep part of the same pack as the retained sample. The lot code should follow the sample, the COA and the quotation; a sample without a code is a demonstration. A trial that needs only 200 g will be decanted from a bulk lot. That is a legitimate service, but it is a repack: ask for it in writing and keep the split's lot code with the trial data, because the bench oil and the production oil may not share a lot even when the specification reads the same. ## Terms to settle before the first order Settle the commercial and the quality terms in one document: Incoterm, pack, dispatch window, specification revision, a COA for every lot, a retained sample, the retest period and the notice required for a source or fractionation change. If a lot fails the agreed specification, the evidence is a re-test of the retained sample against the named method; a photograph of the drum is not evidence. Name the referee laboratory and say who pays for it before the first order, because a dispute is the wrong moment to negotiate either. Specifications are listed on the MCT oil product page; the release tests are described on the COA page; the carrier form is on the MCT powder page; the glossary explains what MOQ means; the quality page sets out how a lot is released; the methods section describes the analytical tests. ### 05 Where MCT oil is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/fatty-acids/mct-oil/compliance/ Reviewed: 2026-11-20 MCT oil is a food ingredient with a history of use, and it can be supplied as an ingredient for food supplements in the EU, the US and the UK. Permission is rarely the obstacle. The file is: the source oil and its allergen position, the process-contaminant data for a refined lauric oil, the label declaration and the claim wording decide whether the file supports the label. The buyer's regulatory team confirms the route for the destination. In one lineMCT oil is a food ingredient in all three markets; the source statement, the process-contaminant data and the claim wording are what decide whether the file supports the label. ## Three markets, three instruments The EU regulates the oil under general food law and, in dose form, under the food supplements directive. The US regulates a supplement under DSHEA and the cGMP rules for dietary supplements, and a conventional food under the food rules. The UK applies retained law in Great Britain, with Northern Ireland following the EU regime. In every market the ingredient status and the finished-product status are separate questions, and the label rules follow the finished product. These statements are a summary as of this review. Contaminant limits, labelling guidance and claim lists change; check the current text before a launch. ## European Union In the EU, the oil is used as a food ingredient and as a carrier for fat-soluble nutrients; the exact source and process are part of the file the buyer's team reviews. Directive 2002/46/EC sets the supplement framework, Regulation 1169/2011 the label, Regulation 1924/2006 the claims and Regulation 2023/915 the contaminant limits. The nutrition declaration carries fat and saturates, using the 9 kcal/g conversion factor for fat; the C8/C10 split is not a nutrition line. The source matters for the allergen file. Coconut and palm kernel are not on the EU Annex II list, which does not remove the need for a source statement and does not cover a carrier or a processing aid. A coconut-derived MCT is not automatically an allergen issue in the EU, but the label still has to name the ingredient accurately, and the source statement is what a customer audit asks for. If the oil is supplied as a carrier in a supplement, the finished product's status is the question, not the oil's. The specification and the source statement belong in the file either way. ## United States In the US, the first question is whether the oil is used in a dietary supplement or in a conventional food. A supplement sits under DSHEA, with cGMP in 21 CFR 111 and labelling in 21 CFR 101; a conventional food follows the food rules. The Supplement Facts panel carries fat and saturated fat, and the ingredient statement names the oil. The C8/C10 split is a specification and ingredient-description point, not a nutrition line. Coconut is classified as a tree nut for US labelling. A highly refined oil derived from coconut may fall within the refined-oil exemption, but the supplier has to document the basis rather than leave the buyer to assume it. If the source is palm kernel, the tree-nut question does not arise, but the source statement still belongs in the file. Structure/function statements are permitted for a supplement with the required disclaimer, and they must be truthful and not misleading. A disease claim is not permitted. The line between the two is a labelling question, and it is reviewed before the artwork is final. ## Contaminants and the limits that matter The catalog panel is a release gate, not a statement of every legal limit. The limit that applies depends on whether the oil is sold as a supplement or used in a conventional food, and on the market. Catalog limits and what the buyer still has to check | Parameter | Catalog limit | What to check | Lead | ≤3 mg/kg | Finished-product limit for the market and category | Arsenic | ≤2 mg/kg | Market limit or customer specification | Cadmium | ≤1 mg/kg | Finished-product limit for the market and category | Mercury | ≤0.1 mg/kg | Finished-product limit for the market and category | Peroxide value | ≤1.0 meq O₂/kg | Shelf-life headroom, not only release | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Finished-product specification and market guidance A refined lauric oil also has process contaminants: 3-MCPD and its esters, glycidyl esters, and the PAH panel where the source makes it relevant. These are not routine lines on the catalog COA; they are questions for the supplier's food-safety file, and the current text of Regulation 2023/915 is the EU reference. ## Where the claim line sits The defensible statements about the oil are compositional: the C8/C10 ratio, the source, the fat content and the physical form. Each can be checked against the COA and the specification. A statement about what the oil does in the body is a different category, and it needs the evidence and the wording that the market allows. In the EU, a claim must be on the permitted list and must not be a disease claim. In the US, a structure/function statement needs substantiation and the DSHEA disclaimer, and a disease claim is not permitted. “Keto” is a diet description, not an authorised claim, and a statement that MCT burns fat is a health promise the file will not support. This site publishes specifications only; it offers no health claim. ## The file a buyer should hold A market-ready file usually contains the specification, the batch COA, the technical data sheet, the safety data sheet, the source and allergen statement, the heavy-metal and microbiology results, the process-contaminant data, the shelf-life statement and the storage condition, a process flow chart and the lot traceability record. Add a GMO statement, a halal or kosher certificate or a country-of-origin declaration where the market or the customer asks for it. The file should be internally consistent. The C8 and C10 ranges on the COA, the TDS and the label should be the same. The source named on the TDS should be the source in the allergen review. The lot code should match the drum, the bottle and the retained sample. Inconsistency is a common reason a file fails a customer audit, not a missing document. ## A launch checklist - Confirm the market and whether the product is a supplement or a conventional food. - Name the oil source and check the allergen position for that source. - Check the contaminant limits against the finished product, not only the oil. - Ask for the 3-MCPD, glycidyl ester and PAH data where the oil is refined. - Match the nutrition declaration to the fat content and the serving size. - Review every claim against the permitted list and the evidence. - Match the lot code across COA, pack and retained sample. - File the TDS, SDS, COA, allergen statement and shelf-life data together. The catalog specification is on the MCT oil product page, and the carrier form is on the MCT powder page. The COA page explains the certificate lines; the MOQ page covers the order file; the identity page covers the C8/C10 evidence. The market summaries are on the EU, US and UK pages; the quality page describes the release route; the methods section covers the analytical tests. ### 06 How we prove an MCT lot is the declared C8/C10 cut URL: https://nutrition.rainwoodbio.com/products/fatty-acids/mct-oil/identity/ Reviewed: 2026-11-20 An MCT lot is the declared material when the GC fatty-acid profile lands inside the C8 and C10 ranges, the full scan shows the balance a fractionated lauric oil should have, and the free fatty acid, peroxide value and moisture show the oil has not been hydrolysed or oxidised. The profile is the centre of the case, but it does not separate a re-esterified MCT from a physical blend or a diluted oil on its own. The triglyceride distribution and the source complete it. In one lineIdentity is the C8/C10 profile, the full fatty-acid scan and the oxidation state read together; a single MCT figure proves none of them. ## Four questions that prove the oil Naming the material on a certificate is the easy part; proving it is the work. Each layer below answers a different question and stands on its own test, so an answer to the first alone describes a document rather than a drum of oil. Four layers of MCT oil identity | Layer | Test or document | What it proves | Document | Name, CAS 73398-61-5, source statement | A medium-chain triglyceride of the declared source | Fatty-acid profile | GC of the methyl esters, C8 and C10 plus the full scan | The cut, and the absence of a lauric-oil dilution | Triglyceride distribution | GC or HPLC by carbon number | A re-esterified oil, not a blend of two triglycerides | Condition | Free fatty acid, peroxide value, moisture, appearance | Not hydrolysed and not oxidised The order matters. A profile without a condition describes a fresh oil that may not be in the drum; a condition without a profile describes a well-kept oil of unknown identity. The same logic applies to the powder, where the oil load and the carrier sit on top of the profile; that case is on the MCT powder identity page. ## The C8/C10 ratio and the full scan The catalog ranges are C8 55.0–65.0% and C10 35.0–45.0% of the fatty acids. At the edges the ratio runs from about 1.2:1 to about 1.9:1; the midpoint is 60:40. Both edges are inside the specification, so the ratio is a window rather than a single number, and a buyer who needs a tighter window writes it as a separate line. The rest of the scan is the evidence. A fractionated lauric oil carries small amounts of C6, C12, C14, C16 and C18, and the exact balance depends on the cut. Coconut oil is roughly half lauric acid, so a C12 figure above the agreed limit is the marker of a coconut-oil addition. A C16 or C18 figure that climbs points to a different vegetable oil. Neither is visible on a certificate that reports only C8 and C10. An oil with added pure C8 sits at the top of the C8 range and the bottom of the C10 range. It can be a legitimate product with its own specification, but it is not the catalog cut, and the certificate should state the cut rather than only the final percentage. ## Why X-ray diffraction is not the identity test here X-ray diffraction identifies crystalline phases, and MCT oil is a liquid at room temperature. A liquid has no long-range lattice to diffract, so a pattern on the oil as supplied says nothing about its identity. Cooling the sample crystallises the triglycerides into polymorphs, and the pattern then depends on the cooling rate and on the polymorph rather than on the C8/C10 cut. XRD has two uses around this product, and neither is oil identity. It can detect a crystalline mineral filler or a solid adulterant in a suspect sample, and it can check the crystallinity of a starch carrier in the powder. For the oil, the identity tests are GC and the carbon-number distribution; for a solid form, ask what the pattern is being used to prove. ## What adulteration looks like Adulteration patterns in MCT oil and the test that exposes them | Pattern | What it looks like | Test or check | Coconut or palm kernel oil | C12 and C14 up; C8 and C10 diluted | Full GC scan; lauric-acid line | Another vegetable oil | C16 and C18 up; profile outside the cut | Full GC scan; sterol or triglyceride pattern | Added C8 | Ratio pushed to the top of the range | C8 and C10 separately; ratio; carbon-number distribution | Older oil | Clean profile with a high peroxide value or free fatty acid | PV, FFA, date of analysis, sensory check | Water or an emulsion | Cloudy oil; moisture high | Karl Fischer; appearance after warming Colour is the weakest signal. A darker oil can be older, differently bleached or oxidised, and a blend can be adjusted to match the expected shade. The stronger signals are the full scan, the ratio, the free fatty acid and the peroxide value. A certificate that reports appearance and a single C8 figure has not tested the substitution most likely to occur. ## How to write identity into the specification The specification should define the cut, the source and the condition in lines that can be tested together. - “Medium-chain triglycerides, CAS 73398-61-5, source declared.” - “Caprylic acid 55.0–65.0% and capric acid 35.0–45.0% of total fatty acids by GC; report the full scan.” - “Triglyceride carbon-number distribution reported, where the cut has to be distinguished from a blend.” - “Free fatty acid ≤0.10%, with the reference acid named.” - “Peroxide value ≤1.0 meq O₂/kg; moisture ≤0.1%.” - “Lauric acid limit agreed as a separate line where a coconut-oil dilution must be excluded.” The lines work as a set. If the source changes, the full scan and the allergen file move with it. If the cut changes, the ratio, the dose arithmetic and the label move. A specification that controls only the C8 and C10 ranges leaves the dilution and the condition open. ## Five questions for the supplier - What are the C8 and C10 results on this lot, and can you send the full chromatogram rather than the two headline figures? - Which fractionation cut and which source oil were used, and has either changed since the last lot? - What is the free fatty acid result, and which reference acid was used for the calculation? - What are the peroxide value, the moisture and the date of analysis, and how has the lot been stored since? - If a result is challenged, would you join a re-test of the retained sample using the agreed method? Those five answers, taken together, are an identity file; one C8 figure on its own is not. The catalog specification sits on the MCT oil product page; the carrier form is on the MCT powder page; the certificate lines are explained on the COA page; the chromatographic methods are described in the methods section; the quality page sets out how a lot is released. ### 01 What the COA for phytosterol esters actually contains URL: https://nutrition.rainwoodbio.com/products/fatty-acids/phytosterol-esters/coa/ Reviewed: 2026-11-20 A phytosterol ester certificate reports two different quantities: the ester content, which says how much of the sterol is esterified, and the total sterols, which says how much sterol the lot carries after hydrolysis. Acid value and peroxide value describe the fatty acid part of the molecule, and the heavy-metal and microbiology panels cover the rest of the release decision. The limits below are the catalog specification; the batch certificate reports a result for a particular lot. In one lineEster content and total sterols are separate release gates: the first shows how much sterol is esterified, the second shows how much sterol the lot carries, and a certificate needs both before the lot is released. ## The certificate as a test report A certificate is auditable when each line names the parameter, the method and the release limit, and leaves a separate column for the measured result. A row that says only “conforms” offers a verdict, not the evidence for it. The identity row and the ester content row answer different questions. The identity row asks whether the sterol profile matches the agreed reference; the ester content row asks how much of that sterol is in the ester form. A lot can pass the profile and still be under-esterified. Identity, ester content and fatty-acid quality · phytosterol esters | Test | Technique | Limit | Appearance | Visual | White to off-white paste or powder | Identification | GC sterol and ester assay against standards | Sterol profile conforms | Ester content | GC, ester fraction | ≥90.0% | Total sterols | GC after saponification | ≥55.0% | Acid value | Titrimetric | ≤1.0 mg KOH/g | Peroxide value | Iodometric | ≤5.0 meq O₂/kg The ester content and the total sterol result are two views of the same molecule; neither replaces the other. ## Ester content, total sterols and the work-up The two numbers come from different work-ups. Total sterols are measured after alkaline hydrolysis: the ester bond is cleaved, the unsaponifiable matter is extracted, and the sterols are separated by GC and summed. The result is the sterol cargo, not the intact ester. Ester content is read from the ester fraction, either directly by GC or by combining the sterol and fatty-acid results; the certificate should name the route, because ester figures from different methods are not automatically comparable. At the catalog floor, 90.0% ester content and 55.0% total sterols imply that the ester itself is about 61% sterol by mass (55 ÷ 90). The rest is fatty acid. A lot with 92% ester and 57% total sterols is coherent; a lot with 92% ester and 50% total sterols needs an explanation in the fatty-acid or free-sterol balance. The fatty acid is the other half of the molecule. It can come from a food-grade vegetable oil, and the source is agreed in the specification because it sets the allergen statement, the melting behaviour and the oxidation profile. The catalog does not fix one fatty acid, so the source belongs in the purchase specification rather than in a default assumption. Acid value and peroxide value, tested on release and again in storage, are the quality lines for that fatty acid. ## Release limit versus batch result The limit is the acceptance boundary; the result is what the laboratory measured. Keep them in separate columns and name the method beside each. If the result column simply repeats the limit, no measurement has been reported. What the result column should show | Test | Limit | Result | Ester content | ≥90.0% | A measured percentage, with the ester method | Total sterols | ≥55.0% | A measured percentage, with the hydrolysis and GC method and the basis | Acid value | ≤1.0 mg KOH/g | A measured value in mg KOH/g | Peroxide value | ≤5.0 meq O₂/kg | A measured value in meq O₂/kg | Heavy metals | Per element | Each metal reported separately, in mg/kg | Microbiology | Counts and absence | Plate count plus the absence result for the lot “Passes specification” is a verdict, and the numbers on the page should support it. Microbiology needs a count and an absence result; the metal panel needs one line per element rather than a combined total. The catalog has no loss on drying line and no separate free-sterol limit for this product. The total sterol and ester results should still state whether they are as-is or dried, with the moisture result beside them, and free sterol is the additional test when the form is critical. ## What moves between batches Between lots, the fatty acid source and the degree of esterification move the ester content and the total sterols together. A source change can keep both inside the catalog limits and still change the melting behaviour, the colour and the oxidation rate. The source is part of the specification, not a purchasing detail. Hydrolysis moves the pair in the other direction: ester content falls, free sterol rises, and acid value rises as fatty acids are released. Total sterols can stay close to the same value because the sterol is still in the sample; the form has changed, not the sterol mass. Oxidation moves peroxide value first and colour later, and colour is the weaker signal. The physical form moves with temperature. A paste that has been through a warm-cold cycle can look grainy or show a surface film; warming the closed pack gently and mixing before sampling is the practical response. The certificate's lot code should be traceable to the pouch, the drum label and the sample kept on file. Watch the trend across lots, not only the latest result. ## When to order an outside test An outside laboratory earns its place with a new source, a first shipment, a disputed form, a warm-stored lot or a new market. The useful panel is the GC ester and total sterol assay with the chromatogram, free sterol, the fatty acid profile, acid value, peroxide value, ICP-MS for the heavy metals and a plate count with absence tests. Add p-anisidine value when the lot has seen heat or the application is a fat blend, because peroxide value alone misses secondary oxidation. Add sterol oxidation products, such as 7-keto and 7-hydroxy derivatives, when the storage history is unknown, and residual solvents if the extraction route is unclear. Ask for the detection limit behind any “not detected” line. ## What to compare between suppliers Put seven lines side by side: form, ester content, total sterols and the basis, free sterol, acid value and peroxide value, fatty acid source and carrier, pack and lot code. Two offers that agree on ester content but differ on form or carrier are not the same material. The second layer is traceability: who manufactured the lot, which fatty acid source was used, and how the material was finished and packed. Specification: the ester hub. Form: the grade page. Identity tests: the identity page. Free-sterol reference: the phytosterol hub. GC background: the methods index. Release: the quality page. ### 02 Paste, powder or carrier: choosing a phytosterol ester grade URL: https://nutrition.rainwoodbio.com/products/fatty-acids/phytosterol-esters/grades/ Reviewed: 2026-11-20 The catalog grade is a neat ester paste with ≥90.0% ester content and ≥55.0% total sterols; a powder on carrier is a second grade because the carrier changes the ester content per gram and adds a label declaration. The fatty acid source and the free-sterol level are part of the grade as well, so a purchase order that names only “phytosterol esters” has not chosen one. In one lineThe grade is fixed by the physical form, the carrier and the ester-to-sterol arithmetic, and a switch in any of the three changes the fill weight and the label. ## Why an ester is a family, not one grade Esterification produces a family, not a single molecule. The sterol mixture, the fatty acid, the degree of conversion and the finishing step all vary, and each moves a property the formulator can feel: melting, flow, colour, solubility and the mass of sterol per gram. The catalog narrows the family to a paste with ≥90.0% ester content and ≥55.0% total sterols. A powder on carrier is not the same grade in a different bag; the carrier is a formulation ingredient, and the powder's specification has to state its own ester and sterol figures. The grade decision is a dosage-form decision before it is a purchasing decision. A softgel fill, an oil blend and a dry capsule each want a different physical behaviour, and the label that follows is different too. ## Paste and powder on carrier side by side Two presentations of phytosterol esters | Property | Neat ester paste | Powder on carrier | Ester content | ≥90.0% on the paste | Lower by the carrier fraction; the powder's own figure applies | Total sterols | ≥55.0% on the paste | Lower in proportion to the carrier | Physical behaviour | Soft paste or waxy solid; flows when warmed | Free-flowing powder | Carrier | None | Named food-grade carrier; declared on the TDS and the label | Typical use | Oil blends, fat-based spreads, softgel fill | Dry blends, capsule fill, powder mixes | Handling | Warm gently to dispense; avoid repeated heat cycles | Keep dry; watch caking and segregation The table compares presentations, not quality. The powder is useful when the process cannot handle a paste; the paste is useful when the carrier is unwanted mass. The powder's ester content should be stated on its own specification, not inferred from the paste. A powder that is half carrier delivers half the ester per gram, and the fill weight has to be recalculated. ## What the form does in the plant The neat ester is a white to off-white paste or waxy solid at ambient temperature. It softens as it warms and flows when melted, which is convenient for a softgel fill or an oil blend and awkward for a dry blend. Dispense it by warming the closed container, not by adding water or solvent, and avoid repeated warm-cold cycles that can make the paste grainy. The ester is insoluble in water and soluble in fats and organic solvents. It disperses in oil, melts into a fat phase and forms an emulsion when the formula supplies an emulsifier and the process supplies shear. A powder on carrier improves handling, not solubility; the ester is still an oil phase when the powder meets water. The powder's risks are the carrier's risks: moisture pickup, caking, segregation in a blend and dust. The carrier is named in the specification, and the powder's ester and sterol figures are measured on the powder. Both presentations are heat-sensitive and need a sealed, cool, dry, dark pack; the 1 kg foil pouch and the 25 kg fiber drum are the standard packs. ## Dose arithmetic when the grade changes The label arithmetic starts with the total sterol figure, not the ester content. At the catalog floor of 55.0% total sterols, 1 g of neat ester delivers 0.55 g of sterol. At 60.0%, the same gram delivers 0.60 g. A label that declares 500 mg of total sterols therefore needs 500 ÷ 0.55 = 909 mg of ester at the floor, or 833 mg at 60.0%. The ester content is a separate number. A 500 mg portion of ester is not 500 mg of sterol; at the floor, 90.0% ester content and 55.0% total sterols mean the ester itself is about 61% sterol, with the rest as fatty acid. A label that says “500 mg plant sterol esters” and one that says “500 mg phytosterols” declare different quantities. For a powder on carrier, use the powder's measured total sterols. If the powder carries 40.0% total sterols, 500 mg of sterols needs 1,250 mg of powder. The carrier is part of the mass, and the fill weight has to include it. Certificate, specification and label need one shared basis: ester mass, total sterols or free sterol equivalent. None of these figures is a dose recommendation. ## What to write into the specification - “Phytosterol esters, CAS 68441-68-9; form: neat paste or powder on carrier; carrier named for the powder.” - “Ester content ≥90.0% by GC; total sterols ≥55.0%; state the basis for each.” - “Free sterol: report the result and agree a limit for the application.” - “Fatty acid source or profile; the ester is a mixture, not a single fatty acid.” - “Acid value ≤1.0 mg KOH/g; peroxide value ≤5.0 meq O₂/kg.” - “Appearance; heavy metals and microbiology as listed; pack and storage condition.” - “Destination market and label basis confirmed before the order.” ## When the ester is the wrong grade The ester is the wrong choice when the label declares free phytosterols. The two names are not interchangeable, and a label that says “phytosterols” cannot be supported by an ester certificate. It is also the wrong choice for a clear aqueous beverage with no emulsification step, because the ester is not water-soluble. The free sterol is the better starting point for a capsule or tablet that declares phytosterols, and for a dry blend that needs a crystalline powder. The free-sterol product has its own specification and arithmetic; it is not a substitute for the ester in a fat-based formula, and the reverse is also true. Changing form means rewriting the formula, not just the purchase order: the fill weight, the label name, the specification and usually the stability package all move. Handle it as a change control, not a balance adjustment. The catalog specification is on the phytosterol ester hub; the certificate lines are on the COA page; the shelf-life consequences are on the stability page; the free-sterol alternative is on the phytosterol hub; the methods index explains the GC; the quality page sets out release. ### 02.1 Phytosterol esters vs phytosterols: solubility, dose and the label URL: https://nutrition.rainwoodbio.com/products/fatty-acids/phytosterol-esters/grades/phytosterol-esters-vs-phytosterols/ Reviewed: 2026-11-20 Free phytosterols and phytosterol esters are not two grades of one ingredient. The free form is a crystalline sterol; the ester form has a fatty acid joined to it, which turns the powder into a fat-soluble paste and changes the mass that carries a given sterol dose. A formulator who swaps one for the other has to rewrite the fill weight and the label, not just the purchase order. In one lineThe ester adds a fatty acid, so a gram carries roughly 0.55 g of sterol at the catalog floor, dissolves in fat rather than water, and must be declared as plant sterol esters rather than phytosterols. ## The bond that changes the ingredient The shared part is the sterol ring system; the difference sits at the 3-hydroxyl. In the free sterol that hydroxyl is open. In the ester it has been reacted with a fatty acid, so the molecule now has a lipophilic tail and a higher mass. The sterol analysis still recognises the same sterol, but the ingredient is no longer the same substance. Take beta-sitosterol as an example. Its molecular weight is about 415, while the oleate ester is about 679. Because the fatty acid can differ, a commercial ester is a mixture with a range of masses, and the sterol share falls as the fatty-acid chain gets heavier. This is why the certificate reports total sterols or ester content, not a single molecular weight. Free phytosterols and phytosterol esters | Item | Free phytosterols | Phytosterol esters | CAS in the catalog | 83-46-5, beta-sitosterol reference | 68441-68-9 | Physical form | Off-white crystalline powder, 80 mesh | Off-white paste, or a carrier powder | Sterol figure | ≥95.0% total sterols | ≥55.0% total sterols; ≥90.0% ester content | Water solubility | Insoluble | Insoluble | Fat solubility | Limited without heat | Miscible with edible fats | Declared ingredient | Phytosterols or plant sterols | Plant sterol esters | Typical use | Tablets, capsules, dry mixes | Softgels, spreads, oil blends The CAS numbers settle which material is on the order; a certificate for one form does not cover the other. ## Solubility is the practical difference Water is the dividing line in practice. Neither form dissolves in water, but the free sterol is a solid that needs heat and shear to enter an oil, and it can crystallise again on cooling. That behaviour suits a tablet or a capsule, where the powder is swallowed rather than dissolved, and it complicates a clear fat-based drink. The ester, by contrast, is already a fat-like material. It mixes into spreads, dressings and oil fills without a melting step, and it can be filled warm into softgels. It still will not make a clear aqueous drink: in water it is an emulsion, and an emulsion needs an emulsifier, a homogeniser and a stability study. A carrier powder is a handling aid, not a solubility fix. It lets the ester be weighed and blended as a solid, but the ester remains an oil phase once the powder is dispersed. Pick the form from the matrix, then choose the pack. ## Dose arithmetic and the label basis The dose arithmetic follows the sterol figure. The free powder at ≥95.0% delivers about 0.95 g of sterol per gram; the ester at ≥55.0% delivers about 0.55 g. For a 500 mg sterol declaration, that is 526 mg of free powder or 909 mg of ester at the floor. At 60.0% total sterols, the ester figure drops to 833 mg. The ester content adds a second layer. If a lot is 90.0% ester and 55.0% total sterols, the ester portion is roughly 61% sterol. A 500 mg portion of that ester carries about 305 mg of sterol; 500 mg of the 95% free powder carries about 475 mg. The two labels say 500 mg, but they promise different amounts of sterol. Every number on the label needs a basis: ester mass, total sterols or free sterol equivalent. The certificate, the fill weight and the label must use the same one. The figures here are arithmetic, not a dose recommendation. ## What the label and the market file have to say The ingredient name on the label is not a marketing choice. “Phytosterols” and “plant sterols” belong to the free form; “plant sterol esters” belongs to the ester. The quantity should name its basis as well, because 500 mg of ester and 500 mg of sterol are not the same declaration. Source is the second label question. A soy-derived sterol and a sunflower-derived sterol trigger different allergen and GMO statements, and the ester's fatty acid source is a third variable. The label and the source statement have to match the certificate, not the sales sheet. The EU novel-food list covers both free sterols and their food-grade fatty-acid esters, but the conditions attach to the category, the level and the label wording. The entry is a route, not an approval of the artwork; the buyer's regulatory team confirms the final text. In the US, the Supplement Facts panel names the form the product actually contains. No disease-related claim is made here. ## Stability follows the form and the matrix The free sterol is a crystalline solid that melts around 130–140 °C. Its storage risks are surface oxidation, moisture caking and heat that softens the crystal. A sealed, dark, dry pack is the default. The ester has a fatty acid tail, so oxidation can start on the chain and hydrolysis can split the ester. Peroxide value and acid value are the relevant indicators, and a warm, moist hold is the condition to avoid. The ester is not inherently less stable; it simply fails by a different route, so the stability panel has to test the right things. A carrier powder brings the carrier's own moisture and flow risks, and it needs its own pack data. ## When to choose which Use the free sterol when the product is a tablet, capsule or dry blend and the label names phytosterols. Use the ester when the fat phase is the point: softgels, oil blends, spreads and dressings, with a label that names plant sterol esters. If the formula is aqueous and clear, neither form is a drop-in; the ester needs an emulsion, and the free sterol needs a solubilisation or suspension step. Changing form is a reformulation. The fill weight, the ingredient name, the specification and the stability package all move, and the market file may need a new review. Put the change through control and check the certificate lines on the COA page before ordering. The catalog specification is on the ester hub; the form choice is on the grade page; the free-sterol reference is the phytosterol hub; the methods index explains the analytics; the quality page sets out release. ### 03 Phytosterol esters: oxidation, heat and the pack URL: https://nutrition.rainwoodbio.com/products/fatty-acids/phytosterol-esters/stability/ Reviewed: 2026-11-20 Phytosterol esters are stable as a sealed, cool, dark paste; the failure modes are oxidation of the fatty acid, hydrolysis of the ester and heat that softens the paste and speeds both. Peroxide value and acid value are the early indicators, and the retest period comes from stability work on the exact pack, not from the release certificate. In one lineThe fatty acid is the fragile part: peroxide value rises first, acid value follows hydrolysis, and heat and light accelerate both, so the pack and the storage condition set the retest period. ## The paste and the powder in storage The neat ester is low in water, but dry is not inert. The surface of the paste is exposed to oxygen, and the fatty acid chain is the first part to oxidise. Peroxide value rises before the ester content moves; a lot can still report ≥90.0% ester content while its peroxide value has climbed toward the limit. That is why the release panel carries both the composition lines and the fatty-acid quality lines. Moisture is the second route. The paste can pick up water at the surface, and moisture plus heat can hydrolyse the ester, releasing free fatty acids and free sterol. Acid value rises, ester content falls and the free-sterol result moves. The chain is slower than oxidation at ambient temperature, but a warm, humid store accelerates it. Colour is a weak but useful signal. White to off-white is the catalog appearance; a yellow or darker tone can follow oxidation, a process change or a long warm hold. Read it beside peroxide value, acid value and a fresh sensory check rather than as a release test. Temperature cycling is a physical risk of its own: a paste that warms and cools repeatedly can become grainy or show a surface film. For the powder on carrier, add moisture, flow and bulk density to the panel; the carrier raises the surface area and can absorb or release water. The powder is diluted, but it is not automatically the more stable presentation. Test the pack you will buy. ## Oil, emulsion and melted fat There is no aqueous stock solution of a phytosterol ester. The material is insoluble in water; the relevant matrices are edible oils, melted fats and emulsions. In an oil blend, the ester is miscible with the fat phase, but the blend's oxidation is not the ester's oxidation. The other oils bring their own unsaturation and their own peroxide value, and the blend has to be tested as a blend. In an emulsion, the oil-water interface is the oxidation site. Heat during homogenisation, metal ions from equipment, and the aqueous-phase pH and oxygen all act at that interface. The ester can also hydrolyse over time, so acid value is a useful marker in an emulsion even when the peroxide value is quiet. A bulk-paste result cannot be read across to an emulsion, because the oil-water boundary, the heat treatment and the container all alter the speed of change. In a fat-based spread, the fat phase limits oxygen access to some extent, but the surface and the water interface remain exposed. Water activity, salt, emulsifier choice and storage temperature belong in the stability design. The practical rule is to name the matrix, the process and the time before saying anything about stability. ## What drives degradation Factors that move phytosterol esters during storage | Factor | What it does | Control | Oxygen | Oxidises the fatty acid; peroxide value rises | Sealed pack; low headspace; review the antioxidant system | Heat | Softens the paste; accelerates oxidation and hydrolysis | Cool store; controlled process temperature | Light | Photo-oxidation; colour change | Foil or opaque pack; dark store | Moisture | Hydrolysis at elevated temperature; acid value rises | Sealed pack; dry store | Metal ions | Catalyse oxidation | Avoid iron and copper contact; check equipment | Fatty-acid unsaturation | More double bonds oxidise faster | Agree the source and profile; test peroxide value The factors reinforce one another: warmth speeds the oxidation that light and oxygen start, and a metal contact adds a catalyst. A result only means something when it names the pack, the condition and the time, because those three define the test. ## A stability protocol for the ingredient The design should fix four things before the first sample goes in: the pack, the storage condition, the sampling points and the test panel. A warehouse arm at 25 °C/60% relative humidity, an intermediate arm at 30 °C/65% and an accelerated arm at 40 °C/75% are the usual frame. Add a light-exposure arm, because a dark incubator will not reproduce photo-oxidation. Use the actual pack: a pouch and a drum differ in headspace and in how often they are opened. Test ester content, total sterols, free sterol, acid value, peroxide value, appearance and microbiology at each point. For the powder on carrier, add moisture, flow and bulk density. Add p-anisidine value and sterol oxidation products where the application is sensitive or the lot has a warm storage history. A typical long-term series runs 0, 3, 6, 12 and 24 months, with 0, 1, 2, 3 and 6 months under accelerated conditions. The report should show the individual results and identify the pack and the lot family, not only a pass statement. ## The finished formula changes the answer A softgel fill is an oil phase inside a shell. The shell can transfer moisture and oxygen, and the fill's peroxide and acid values can move after encapsulation even when the bulk paste was quiet. Check the fill and the shell; the bulk pack's retest period does not automatically apply after encapsulation. An oil blend is a dilution, not a protection. The other oils can raise or lower the blend's oxidation rate depending on their own unsaturation and antioxidant content. A spread is an emulsion, with the interface risks described above. A powder stick or a dry capsule can fail at the seal as easily as at the chemistry. An overage belongs to the formulation and the label, not to the pack. If more ester is needed to hold the declared sterol figure at the end of shelf life, that is a formulation choice supported by data; more ester does not fix a container that lets moisture through. ## How the shelf life is set There is no universal shelf-life figure for this material. The retest period is written into the specification after the stability work on the exact pack, and it is that pack's data, not a product-family average, that supports it. When the retest period ends, the retained sample is re-tested before any extension is granted. An extension is a documented decision; a bulk figure cannot simply be copied to a repack, a carrier powder or a softgel. Standard packs are listed on the product hub; release tests are on the COA page; pack and lead time are on the MOQ page; the free-sterol hub gives the comparison; the methods index explains the analytics; the quality page sets out release. ### 04 Phytosterol esters: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/fatty-acids/phytosterol-esters/moq/ Reviewed: 2026-11-20 The minimum order is one 1 kg foil pouch; production quantities ship in 25 kg fiber drums; the standard dispatch window is 1–7 days. A firm quotation has to name the form (neat paste or powder on carrier), the ester and total sterol figures, the quantity and pack, the destination and Incoterm, the documents, and the intended use. In one lineOne kilogram is the smallest pack that can be sealed, sampled and traced as a lot, and because the paste and the powder on carrier are different specifications, the grade and the pack are ordered together. ## Why the minimum is 1 kg A kilo is enough to run a bench trial, hold a reference portion and send a sample to an outside laboratory. It is a sealed pack with a lot code, not a portion spooned out of a drum. If a buyer asks for less, the material has to be split and repacked, which adds handling and weakens the link to the original lot. A 25 kg drum cuts the handling per kilogram, but it ties up inventory for longer and a paste in a drum is slower to warm evenly than a pouch. The minimum is about the pack, not a volume incentive; choose the pack that the trial or the filling line can finish before the retest date. ## Packs and formats Standard phytosterol ester packs | Format | Fill | Where it fits | Handling note | Foil pouch | 1 kg | Trials and small batches | Barrier pack; close it after use; warm gently | Fiber drum | 25 kg | Production | Liner keeps moisture out; note the drum code and opening date | Carrier powder | On request | Dry blending or capsules | Carrier and powder assay on its own specification | Custom pack | On request | Filling line or repack | Agree liner, headspace and label Foil blocks light and moisture, but the closure is where the pack usually fails. Once a pouch is opened, folding the top over does not restore a heat-sealed closure. The fiber drum relies on its inner liner, so keep the liner closed and keep the drum off a damp floor. The carrier powder is not a packing choice; it is a different specification, and the carrier and the powder's own ester and sterol figures have to be on the quotation. ## Lead time and dispatch Standard packs leave within 1–7 days of order confirmation. Picking, paperwork and dispatch happen inside that window; freight, customs and the buyer's own release do not. A special carrier, a special pack or a new specification takes longer, and the extra time should appear as a separate line on the quotation. Ask for a dispatch date rather than a range. A kilo pouch normally travels as a parcel; a 25 kg drum goes on a pallet. The Incoterm decides who books the freight and who clears customs, and the lot documents should be in the same shipment as the material. If the route is hot, mention it before dispatch so the journey can be planned. A paste left in a warm vehicle or on a sunny dock can soften, develop a surface film or turn grainy; the receiving store needs a cool, dry place ready. ## What a quotation needs Six details turn a quotation into an offer that can be compared: - Material and form. Phytosterol esters, CAS 68441-68-9; paste or carrier powder; carrier named. - Specification. Ester content, total sterols, free sterol, acid value, peroxide value, fatty acid source, heavy metals, micro panel. - Quantity and pack. One-kilo pouch, 25 kg drum, carrier powder or a custom pack. - Destination and Incoterm. Country, port or address, and the trade term. - Documents. COA, TDS, SDS, source and allergen statement, carrier statement and any market declaration. - Where it goes. Supplement, food or industrial use, plus the country of sale. An offer that omits the form or the market cannot be compared with another. The same ester as a paste and as a carrier powder has two fill weights and two label declarations. Commercial terms are not published here; they belong on the quotation. ## Qualifying a lot with a sample A 1 kg pack is the qualification lot. Check identity, ester content, total sterols, free sterol, acid value, peroxide value and microbiology before scaling, and keep a portion from that same pack. The sample, the COA and the quotation should all carry the same lot code; without one, the sample is a demo rather than a qualification. Paste sampling takes care. Warm the closed pack until it can be mixed, then take the portion; a plug from a cold paste may not represent the lot. Powder sampling means taking increments across the pack, because a carrier blend can separate. Write down the date and the condition of the pack. A trial needing less than a kilo is a repack, not the catalog pouch: it comes out of a bulk lot, needs its own handling record and is not the 1 kg catalog pack. Ask for the split to be documented, and file its lot code with the trial data. ## Terms to settle before the first order Put the commercial and quality terms on one page: Incoterm, pack, dispatch window, specification revision, a COA per lot, the retained sample, the retest period and the change route. Agree them before the first production order; after a dispute, the same conversation is much harder. Name what counts as a change. A new fatty acid source, a new carrier, a new finishing step or a new pack can all alter the material the customer qualified. The agreement should say which changes need notice and which need a fresh sample, and it should name the referee laboratory and who pays for a joint re-test. If a lot fails the agreed specification, the retained pack and a shared re-test using the method named in the specification are the route, not a photograph of the drum. A return based on appearance alone is difficult to defend for either side. Product hub: specification. COA page: release tests. Compliance page: market file. Phytosterol hub: free-sterol comparison. Methods index: analytics. Quality page: release. ### 05 The regulatory file for phytosterol esters URL: https://nutrition.rainwoodbio.com/products/fatty-acids/phytosterol-esters/compliance/ Reviewed: 2026-11-20 Three questions shape the regulatory file for a phytosterol ester: which form is being sold, where the fatty acid comes from, and which market will see the finished product. The certificate answers the first two only in part; the route and the label are separate work. The buyer's regulatory team signs off that route, and no disease-related claim is made on this page. In one lineThe ester is a different file from the free sterol: it has to name the form, the fatty acid source and the finished product, and the buyer's team confirms the route for the destination. ## The four layers of the dossier The dossier has four layers. Layer one is the specification: ester content, total sterols, free sterol, fatty acid source and carrier. Layer two is the lot evidence: the COA, the methods and the basis of each figure. Layer three is the market route: destination, product category, use level and label. Layer four is change control: what triggers a review when the source, carrier, process or pack moves. Gaps usually appear where two layers meet. If the COA omits the source, the allergen statement has no support; if the specification does not say paste or carrier powder, the fill weight and the label cannot be fixed. A dated index at the front of the dossier makes those joins visible. ## European Union EU novel-food law is the starting point. Regulation (EU) 2015/2283 is the parent rule, and Implementing Regulation (EU) 2017/2470 carries the Union list. That entry applies to free phytosterols and to their esters with food-grade fatty acids; it sets categories, maximum levels and label conditions. As of this review the ceiling is 3 g/day on a phytosterol basis, but the current text is the authority. An ester label declares ester mass, while the ceiling is expressed as sterol. The two must be reconciled before the daily portion is compared. Meeting the catalog specification does not prove the category or the portion is inside the entry; that is a market-specific check. The contaminant limits in Regulation (EU) 2023/915, the supplement rules in Directive 2002/46/EC, the labelling rules in Regulation (EU) No 1169/2011 and the claims rules in Regulation (EC) No 1924/2006 sit alongside the entry. Read the current texts, not a summary. ## United States For the US, four variables decide the route: form, source, use level and product type. Phytosterol esters can be dietary ingredients, and a food use can be supported by a GRAS conclusion. The supplier names the basis and the supporting document; the buyer checks that it reaches the finished product and the intended use. The FDA gives no pre-market approval for a dietary ingredient; the dossier is the evidence. Allergen review begins with the plant source. Soy- and sunflower-derived sterols do not generate the same statement, and even a purified ester needs a source review. The Supplement Facts panel should state the form actually used, such as plant sterol esters. For a carrier powder, the carrier is a label ingredient as well. ## United Kingdom Two regimes apply in the UK. Great Britain works to the GB register and GB label rules; Northern Ireland follows the EU novel-food route. The ship-to address selects the regime, and the buyer's team should record that choice on the order so the artwork and the citation can be checked against it. ## Contaminants and ester-specific limits Metal limits apply to what the consumer eats, not to the drum. Convert the lot result through the daily dose and the finished-product mass before comparing it with the limit. The table is a starting point; the destination text and the dose decide the final figure. Metal limits for the finished product | Metal | Reference level | Evidence for the file | Lead (Pb) | 3.0 mg/kg | Batch figure, test method, agreed limit, dose conversion | Cadmium (Cd) | 1.0 mg/kg | Batch figure plus any category exception | Mercury (Hg) | 0.10 mg/kg | Batch figure and the method used | Arsenic (As) | Set by customer or market | Agreed limit and method on the certificate The ester also has quality limits that are not contaminants: acid value ≤1.0 mg KOH/g and peroxide value ≤5.0 meq O₂/kg. They describe the fatty acid's condition and belong in the same review. Tests for residual solvents, mineral oil hydrocarbons and sterol oxidation products are not catalog lines; ask when storage has been warm, the extraction route is unclear or the market requires them. For a carrier powder, request the carrier's own certificate. ## Claims and the label No disease-related claim appears on this page. Any nutrition or health claim is reviewed against the destination's claims framework, and the brand's reviewer checks the claim text, the form and the conditions of use. The certificate supports the material, not the claim. The label should identify the material, its source and the quantity basis. For an ester, that basis is ester mass, total sterols or free sterol equivalent, and it must be stated. “500 mg plant sterol esters” and “500 mg phytosterols” describe different amounts even when the packs weigh the same. ## Documents to keep on file Documents in a phytosterol ester dossier | Paper | Purpose in the dossier | Specification (TDS) | Form, ester content, sterol figure, free sterol, fatty acid source and carrier | Certificate of analysis | Lot results, test methods, basis of each figure | Safety data sheet | Handling, storage, transport class | Source and allergen statement | Plant source and allergen conclusion | GMO and origin statement | Source, country of origin and process route | Carrier statement | Identity, level and certificate for a carrier powder | Stability summary | Pack, condition and retest period | Novel-food confirmation | Entry, conditions and destination relied on Add a residual-solvent statement where the extraction or purification route makes it relevant, and a declaration for any processing aid the market requires. If the dossier lacks one of them, flag it before dispatch rather than after arrival. ## Checklist before the first order - The specification names the ester, CAS number, form and carrier. - The COA carries ester content, total sterols, free sterol, acid value, peroxide value, metals and microbiology. - Metal results have been converted to the finished dose. - The artwork names the form and the basis of the quantity; claims are closed. - The route is confirmed for the exact form and source. - Source, fatty acid, carrier and pack sit under change control, and quotation, specification and COA share a version. The catalog specification is on the phytosterol ester hub; the lot certificate is explained on the COA page; the free-sterol comparison is on the phytosterol hub; the methods index explains the analytics; the quality page sets out release. ### 06 How we prove a phytosterol ester lot is the ester URL: https://nutrition.rainwoodbio.com/products/fatty-acids/phytosterol-esters/identity/ Reviewed: 2026-11-20 An ester lot is identified by five agreeing measurements: the document names the ester and its CAS number, the GC assay gives the ester content and the sterol profile, a free-sterol test shows how much sterol is not esterified, a fatty acid profile shows what the sterol is esterified with, and the mass balance closes the numbers. The sterol profile alone proves the sterol source, not the ester form. In one lineThe sterol profile says which sterols, the ester content and free sterol say whether they are esterified, and the fatty acid profile says what they are esterified with. ## Five pieces of evidence A convincing identity file is built from measurements that point the same way. The document, the GC ester and sterol result, the free-sterol result, the fatty acid profile and the mass balance each answer a separate question; XRD is a sixth check when the solid form matters. Evidence for a phytosterol ester identity file | Evidence | Question it answers | What it proves | Document | Is the form, CAS number and source named? | Paperwork only | GC ester and sterol assay | How much is esterified, and which sterols are present? | Ester content and sterol profile | Free sterol | How much sterol is not esterified? | The extent of esterification | Fatty acid profile | Which fatty acid is attached? | The fatty acid source and the ester type | Mass balance | Do ester, sterol, free sterol and acid value agree? | Consistency of the numbers | XRD, where needed | Is the solid crystalline, and does the pattern match? | Solid form, not the sterol ratio A supplier who answers only the document question has described the paperwork. A supplier who gives a sterol profile and no ester content has shown the cargo, not the form. The file is complete when the answers point at the same material. ## The sterol-to-ester ratio and the fatty acid The catalog sets ester content at ≥90.0% and total sterols at ≥55.0%. At the floor, 55 ÷ 90 = 0.61, so the ester itself is about 61% sterol by mass and the rest is fatty acid. A lot with 92% ester content and 57% total sterols is coherent; a lot with 92% ester content and 50% total sterols needs an explanation, because the two lines no longer describe the same molecule. Free sterol is the direct check on esterification. If free sterol rises, ester content falls while total sterols can stay close to the same value: the sterol is still in the sample, but it is no longer esterified. Acid value may rise if hydrolysis released fatty acids. The catalog does not set a separate free-sterol limit, so ask for the result when the form matters and agree a limit for the application. The sterol profile is the source fingerprint. The catalog requires the profile to conform to the agreed reference rather than fixing three ranges, so the specification has to carry the reference. Sitosterol, campesterol, stigmasterol and the minor sterols keep their pattern through esterification; a source change moves that pattern even when the ester content and total sterols stay inside the catalog. A profile that fits the source but an ester content below the floor points to a blend or a partly esterified lot. The fatty acid profile is the second fingerprint. A phytosterol ester is a mixture of steryl esters, and the fatty acid distribution differs between sunflower-type, rapeseed-type and other food-grade sources. The specification should name the source or the profile. The melting behaviour, the flow and the oxidation rate follow the fatty acid, so a source change is a specification change, not a purchasing detail. Normalisation is the quiet trap. Ester content, total sterols and free sterol must be reported on the same basis, as-is or dried, and the certificate should give the moisture result needed to convert between them. The catalog has no loss on drying line, so the basis has to be stated explicitly. ## X-ray diffraction: what it can and cannot do XRD answers solid-state questions. The neat ester is a paste or a waxy solid at ambient temperature, so a sharp crystalline pattern is not the routine expectation, and the absence of crystallinity does not mean the ester is absent. The pattern is more useful for the powder on carrier: it can show whether the carrier is crystalline or amorphous, whether crystalline free sterol is present, and whether two powders differ in solid form. XRD cannot quantify ester content, total sterols or the fatty acid profile. A “match” claim that omits the reference pattern and the detection limit proves very little. For a disputed lot, use XRD alongside the GC, the free-sterol result and the mass balance. ## What adulteration looks like Phytosterol ester substitutions and their analytical signals | Adulterant | Effect | Signal | Test | Free sterol added | Ester content falls; free sterol rises | Ester low; total sterols may hold | GC ester and sterol; free sterol | Vegetable oil dilution | Ester and sterol per gram fall; fatty acid profile shifts | Low ester and total sterols; profile mismatch | GC; fatty acid profile; mass balance | Excess carrier | Ester and sterol per gram fall; powder mass rises | Low assay; carrier markers | Carrier statement; ash; mass balance | Different fatty acid source | Sterol profile fits; fatty acid profile differs | Melting and flow change; profile mismatch | Fatty acid profile | Water | Hydrolysis; acid value and free sterol rise | Acid value high; free sterol high | Acid value; free sterol; moisture Appearance is the weakest signal. A white paste looks like a white paste, and a powder on carrier looks like a powder. The stronger signals are the ester content, the free-sterol result, the fatty acid profile and the mass balance. ## Writing identity into the specification - “Phytosterol esters, CAS 68441-68-9; form: neat paste or powder on carrier; carrier named.” - “Ester content ≥90.0% by GC; total sterols ≥55.0%; state the basis for each.” - “Free sterol: report the result and agree a limit for the application.” - “Fatty acid source or profile; the ester is a mixture, not a single fatty acid.” - “Acid value ≤1.0 mg KOH/g; peroxide value ≤5.0 meq O₂/kg.” - “Sterol profile conforms to the agreed reference; report the peak table.” - “Heavy metals and microbiology as listed; pack and storage condition.” ## Five questions for the supplier - Is the lot the neat ester or a powder on carrier, and what is the carrier level? - What is the ester content, and was it read from the intact ester or calculated from the sterol and fatty-acid results? - What is the total sterol result and its basis, and what is the free-sterol result? - Which fatty acid source and profile does the lot carry, and does it match the declaration? - If a result is challenged, is a shared re-test of the retained pack acceptable? Those five replies form the identity file; a lone ester figure does not. The catalog specification is on the phytosterol ester hub; the certificate lines are on the COA page; the free-sterol comparison is on the phytosterol hub; the methods index explains the analytics; the quality page sets out release. ### 01 What the COA for squalane actually contains URL: https://nutrition.rainwoodbio.com/products/fatty-acids/squalane/coa/ Reviewed: 2026-11-20 A squalane certificate has to settle three questions in one document: that the oil is the saturated hydrocarbon, how much of it the lot contains, and whether the hydrogenation ran to completion. The panel that does this is appearance, GC identification and assay, refractive index, iodine value, moisture, heavy metals and microbiology. The limits below are the catalog specification; the certificate itself records one lot against them. In one lineThe GC assay states how much squalane is present, the refractive index supports the identity, and an iodine value at or below 1.0 is the line that shows the double bonds are gone. ## Reading the certificate line by line A useful certificate is one a reviewer can audit without a telephone call. Each row should name the test, the method, the acceptance limit and the measured value, and the method should be specific enough to repeat: “GC” alone does not say which column, which detector or which standard was used. The identity rows and the quantity rows are not interchangeable. Retention on the GC and the refractive index place the material in the right family; the iodine value says whether the double bonds were removed; the assay says what fraction of the oil the main peak represents. Leave the iodine value out and the certificate can still describe a partly hydrogenated oil as squalane. Squalane release panel: test, method and limit | Parameter | Method | Release limit | Appearance | Visual | Colourless to pale yellow, clear oil | Identification | GC retention and refractive index | Conforms to the reference | Assay (GC) | GC with flame-ionisation detection | ≥95.0% | Refractive index (20 °C) | Refractometry | 1.450–1.455 | Iodine value | Wijs titration | ≤1.0 g I₂/100 g | Moisture | Karl Fischer | ≤0.1% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent ## Which numbers need a stated basis Two rows on this panel need a stated basis, and neither is the moisture row. The assay needs to say whether it was calculated by area normalisation or against an internal standard, and whether the percentage refers to the oil as received. The iodine value needs the titration method named, because Wijs and Hanus do not return identical numbers on the same oil. Area normalisation is the common shortcut. It divides the squalane peak area by the total area of all peaks, which assumes that every component responds like squalane. In a hydrocarbon oil that assumption is approximate: isomers and residual squalene can have different response factors. An internal standard, added before injection, removes the assumption and makes the figure comparable between laboratories. Another basis question is what the balance contains. The ≥95.0% floor allows up to 5% outside the named peak, and calling all of it impurity is not an analysis. The certificate should identify residual squalene, hydrogenation isomers or feedstock hydrocarbons. The iodine value is the independent check: squalene titrates near 371 g I₂/100 g and squalane near zero, so a value of 1.0 caps unsaturated material at about 0.3%. ## Release limit, result and the difference A limit is a boundary; a result is a measurement. When the result column repeats the limit, the reader has no evidence that a measurement happened. The table below sets out what a measured column looks like for each test. What a measured result should look like | Parameter | Release limit | Result column | Assay | ≥95.0% by GC | Value, calibration mode and integration basis | Refractive index | 1.450–1.455 at 20 °C | Value and cell temperature | Iodine value | ≤1.0 g I₂/100 g | Value and titration method | Moisture | ≤0.1% | Value by Karl Fischer | Heavy metals | Per element | mg/kg for each element, with the method For the metal panel, a single summed figure is not enough, because the element that matters is hidden in the total. For microbiology, the certificate needs a count and an absence statement, not the word “pass”. ## Where lot-to-lot variation comes from The feedstock is the first source. The catalog route starts from olive deodoriser distillate, a refining stream whose composition follows the crop, the refinery and the season. Hydrogenation then introduces its own variables: catalyst activity, hydrogen pressure, temperature and residence time. A complete reaction drives the iodine value towards zero; a run that ends early leaves a measurable squalene fraction. Finishing steps account for much of the rest. Catalyst removal and deodorisation affect colour and odour, and a batch that is slightly darker than the previous one may simply have seen a longer heat hold. The colour window is wide, so the batch record and an instrument colour reading are better evidence than appearance alone. Handling explains the moisture and microbiological results. A drum opened in a humid room, a filter that stayed wet, a bottle left uncapped: each shows up as water or as a count. Matching the certificate's lot code to the bottle, the drum and the retained sample is the simplest check that the document describes the material in hand. ## When an outside laboratory earns its fee Independent testing makes sense at four moments: a new source, a first shipment to a regulated market, a marketing claim the supplier's certificate does not cover, and any disputed result. The panel should target the question rather than duplicate the release certificate: GC with standards for squalane and squalene, refractive index with the temperature recorded, iodine value, Karl Fischer moisture, ICP-MS metals and microbiology. Two additions cover specific worries. FTIR will show a carbonyl or a silicon-oxygen band that a pure hydrocarbon should not have, and GC-MS will identify an unexpected peak. A source claim needs different evidence: the molecular tests prove the hydrocarbon, but only the origin record and the traceability chain support the word “olive”. Chain of custody decides whether the result is usable. The portion tested should come from the same pack as the retained sample, and the report should carry the lot code. In a dispute, the referee needs the retained sample, the certificate and the specification, and a test designed to distinguish saturation from dilution is more informative than a second run of the same assay. ## Six lines for a supplier comparison Line up the name and CAS number, the assay with its calibration mode, the refractive index with temperature, the iodine value with method, moisture and metals, and the pack with its lot code. An offer that matches on assay but not on iodine value is a different material. Traceability is the second layer: who hydrogenated the lot, where the feedstock came from, how the catalyst was removed, and which filtration and deodorisation steps were applied. Start from the squalane product page for the catalog specification, then read the identity page for the tests that separate the saturated form from the unsaturated one and the compliance page for the market documents. The unsaturated material has its own squalene page; the analytical methods are introduced in the methods section; the release workflow is described on the quality page. ### 02 Squalane grades: source, hydrogenation and use URL: https://nutrition.rainwoodbio.com/products/fatty-acids/squalane/grades/ Reviewed: 2026-11-20 Squalane is not a single commodity: the market offers it by feedstock, by how completely it was hydrogenated, and by the use it is documented for. The catalog grade is olive-derived, ≥95.0% by GC, with an iodine value ≤1.0 g I₂/100 g. A different feedstock, a higher assay or a partly hydrogenated lot is a separate specification, and there is no powder grade in this catalog. In one lineThe grade of squalane is the source plus the hydrogenation endpoint plus the use grade; the catalog material is olive-derived, at least 95% by GC, with an iodine value at or below 1.0. ## Three decisions behind the word grade The first decision is the feedstock. Squalane is produced by hydrogenating squalene, and the squalene may come from olive-oil refining, from a synthetic route or from other plant and marine sources. All routes give C30H62, but the minor hydrocarbons that survive refining and the traceability documents behind them differ. “Olive-derived” is therefore a supply-chain statement as much as a chemical one. The second decision is the reaction endpoint. Hydrogenation is a catalytic process, and how far it runs is measured by the iodine value. A lot at or below 1.0 is fully saturated; a lot above it retains double bonds and behaves more like squalene on the shelf. A result of 0.9 passes the catalog gate without much margin, and a lot at 0.2 is a different proposition. The third decision is the use. The same oil can be documented as a cosmetic ingredient or as a food or supplement ingredient; the molecule does not change, but the safety file, the source statement and the label position do. A grade name that does not state the use leaves the buyer to guess which file applies. ## The grades side by side Squalane grades and the neighbouring material | Grade | Identity and source | Iodine value | Assay | What changes | Catalog oil | Squalane, CAS 111-01-3, olive route | ≤1.0 g I₂/100 g | ≥95.0% by GC | The standard specification and the two standard packs | Tighter assay | The same molecule, a narrower peak | ≤1.0 g I₂/100 g | Above the catalog gate | A separate specification, refining history and certificate | Partly hydrogenated | Residual double bonds remain | Above 1.0 | May still pass the assay gate | A different shelf behaviour; outside the catalog gate | Synthetic feedstock | Same formula, non-olive route | ≤1.0 g I₂/100 g | — | Feedstock traceability and impurity profile | Topical-use separation | The same oil, separated for topical use | ≤1.0 g I₂/100 g | ≥95.0% by GC | The document set and the grade name, on request | Squalene | CAS 111-02-4, unsaturated | 350–380 g I₂/100 g | ≥90.0% by GC | Unsaturation, stability, analysis and the label name The partly hydrogenated row is the one that trips buyers: it can carry a 95% assay and still fail the iodine-value line, because the assay counts the main peak while the titration counts the double bonds. The synthetic row is a legitimate source with its own traceability chain, not a dilution. Squalene is a separate substance rather than a purer grade of the same oil. ## One oil, one set of handling rules Squalane is a clear, colourless to pale yellow oil with almost no odour. It is lighter than water, insoluble in it, and freely miscible with vegetable oils, esters and many non-polar solvents. The refractive index sits at 1.450–1.455, the density at about 0.81 g/mL, and the oil remains liquid at ordinary storage temperatures. Those properties suit an oil phase, a softgel fill or a topical base, and they make an unemulsified addition to a water-based drink impractical. Not needing an antioxidant package is not the same as needing no care. Keep the oil in the amber bottle or the closed drum, keep the headspace small and the store cool, and protect the neck and closure from dust. A drum that is opened repeatedly in a humid room will pick up water, and the moisture line is a release gate at ≤0.1%. There is no powder grade in this catalog. A formulator who needs a free-flowing solid is asking for a carrier-based format, a different product with a carrier, an oil load and its own specification. That request belongs in the quotation conversation, not in an assumption at the bench. ## Dose arithmetic and the label Squalane is a single oil, so the arithmetic is simpler than for a salt or a chelate: there is no counter-ion and no conversion factor between two forms. The factors that matter are the assay, the fill weight and the oil load of any blend. One gram of a 95% oil delivers about 0.95 g of squalane; a 500 mg softgel fill at the same assay carries about 475 mg. In a blend, a 10% inclusion in a 5 g serving delivers 0.5 g of squalane, and the rest of the serving is the other oils. The label should declare the squalane mass, not the mass of the blend. A softgel fill weight is the oil mass; the shell is weighed separately. For a topical product the use level is set by the formulator and the safety assessment, and the grade's document set has to match the use. None of these figures is a recommended intake; they are the arithmetic that keeps the label, the fill weight and the weigh-up in agreement. An overage for storage loss is a separate decision. It belongs with the stability data for the finished format, and it does not repair a pack that lets moisture in. The stability page sets out the protocol. ## What to write into the specification - “Squalane, olive-derived, CAS 111-01-3, C30H62.” - “Assay ≥95.0% by GC, with the calibration mode stated.” - “GC retention and refractive index 1.450–1.455 at 20 °C for identification.” - “Iodine value ≤1.0 g I₂/100 g by Wijs, reported as a measured figure.” - “Moisture ≤0.1% by Karl Fischer; metals and microbiology as listed.” - “Residual squalene reported, with a limit agreed for the grade.” - “Use grade named: cosmetic or food and supplement, with the matching document set.” - “Pack: 1 kg amber bottle or 25 kg HDPE drum; storage condition stated.” ## When another grade or another material is right If the brief calls for the unsaturated oil, squalene is the material, not a higher grade of squalane. A squalene lot cannot stand in for squalane when the label names squalane, because the ingredient name, the CAS number and the unsaturation all change. If the application needs a free-flowing solid, no grade of this oil supplies it; a carrier-based product with its own certificate is the answer. If the use is a food or a supplement, the grade question is not settled by the assay. The document set, the source statement and the route for the destination have to be confirmed before the order, and a cosmetic-grade certificate does not establish a food use. Catalog data is on the product hub; the saturated and unsaturated forms are set out in the level-four comparison; each reported line is explained on the COA page; the unsaturated material has its own squalene page; change control is described on the quality page. ### 02.1 Squalane vs squalene: the saturated and unsaturated forms URL: https://nutrition.rainwoodbio.com/products/fatty-acids/squalane/grades/squalane-vs-squalene/ Reviewed: 2026-11-20 Squalane is the hydrogenated form of squalene: the same thirty-carbon skeleton, with the six double bonds converted to single bonds. The formula changes from C30H50 to C30H62, the molar mass from 410.72 to 422.81, and the iodine value from a window around 371 to a limit of 1.0. Those numbers, not the appearance of the oil, define which material is in the drum. In one lineHydrogenating six double bonds turns squalene into squalane, and that single change moves the iodine value from about 371 to below 1.0, the refractive index down, and the label name to a different ingredient. ## The reaction that separates the two Hydrogenation is a catalytic addition. Squalene is treated with hydrogen over a metal catalyst, usually nickel, at elevated temperature and pressure; each double bond takes up one molecule of hydrogen, and six are needed for a complete conversion. The product is filtered to remove the catalyst and deodorised, and the saturation is what remains. The reaction does not change the carbon skeleton, only its unsaturation. That is why the two oils are so close in density and feel, and why a buyer cannot tell them apart by looking. It also means the difference is quantitative: iodine value, refractive index and chromatographic retention carry the identification that appearance cannot. An incomplete reaction leaves a mixture. The iodine value sits between the squalane limit and the squalene window, the chromatogram shows two peaks, and the oil keeps some of the oxidation sensitivity of the unsaturated material. A certificate that reports only an assay and an appearance can hide that state. ## The numbers that move Squalane and squalene: the defining figures | Property | Squalane | Squalene | CAS registry number | 111-01-3 | 111-02-4 | Molecular formula | C30H62 | C30H50 | Molar mass | 422.81 g/mol | 410.72 g/mol | Carbon-carbon double bonds | None | Six | Iodine value | ≤1.0 g I₂/100 g | 350–380 g I₂/100 g | Refractive index at 20 °C | 1.450–1.455 | 1.494–1.499 | Density | About 0.81 g/mL | About 0.86 g/mL | Catalog assay | ≥95.0% by GC | ≥90.0% by GC The iodine value separates the two by a factor of more than 300. The refractive index and the density follow the same direction, and the assay gates differ because the two products are refined to different targets, not because one is purer in any absolute sense. ## Reading the difference in a laboratory A hydrocarbon has no useful ultraviolet chromophore, so an HPLC method with UV detection is the wrong tool. GC with flame ionisation is the practical separation, and the method should name the column, the oven programme and standards for both oils; the peaks are close enough that a retention time alone is weak evidence. The iodine value is the release figure that decides the question. A squalane lot at or below 1.0 cannot be squalene, and a squalene lot in the 350–380 window cannot be squalane. Refractometry supports it, because the gap between 1.450–1.455 and 1.494–1.499 is far larger than the repeatability of the instrument. Infrared spectroscopy shows the carbon-carbon double-bond absorption in squalene that is absent from squalane, and an ester carbonyl would point to a different adulterant. When both are present, GC and the iodine value give an approximate split. A partly hydrogenated oil sits between the endpoints, and the iodine value is the quickest way to place it. Colour tells nothing here. ## Why saturation changes the shelf Autoxidation needs a site to start, and squalene supplies six double bonds plus the allylic positions around them. Oxygen attacks those sites and the first products are hydroperoxides, which are neither volatile nor visible; as they decompose, aldehydes and ketones appear, the odour turns heavier and the peroxide value climbs. Squalane has no such sites, so the chain reaction has nowhere to begin. It still responds to heat and light — any oil does — and a blend containing an unsaturated oil can oxidise around it, but its own shelf behaviour is far less eventful. That is why the saturated oil is used where a long, unrefrigerated shelf matters. The formulation consequence follows. A squalene formula needs an antioxidant, a pack that excludes oxygen and a container that excludes light. For squalane, a clean pack, a sensible temperature and a moisture check are the practical controls, and the stability work concentrates on colour, odour and the pack rather than on peroxide value. The squalene stability page sets out the oxidation protocol. ## Two names, two files Squalane and squalene are different ingredient names and cannot be swapped on a label. The CAS number, formula and degree of unsaturation all change, so swapping one for the other at the same weight changes the declared ingredient and the evidence behind it, even though the mass difference is only about 2.9%. The use then decides the framework. Squalane is mainly a cosmetic ingredient, where the INCI name is Squalane and the cosmetic rules apply; squalene is sold in some markets as a food or supplement oil. The route for the destination and the intended use is confirmed by the buyer's regulatory team. A cosmetic certificate does not establish a food use, and a food certificate does not make the material cosmetic. Source statements are a third label question. Olive-derived material can carry a source claim where the destination allows it, but the certificate alone does not prove botanical origin; the origin record and the traceability chain do. No disease-related claim is made for either oil on this page. ## Choosing between them Take squalane when the brief asks for a saturated, shelf-stable oil and the label names squalane: a cosmetic base, an emollient, a softgel fill, or an oil blend where resistance to oxidation is the point. Take squalene when the specification and the market file call for the unsaturated oil. Neither is a higher grade of the other. A switch between them is a new material, not a substitution: new specification, new certificate, new stability work and a new label review. The oils may look the same in the bottle, yet the analytical figures, the way each behaves in air and the regulatory file all move. The squalane hub carries the saturated specification; the squalene hub carries the unsaturated one; the grades page places this comparison in the wider range; the COA page shows how each line is reported; the identity page gives the tests; the methods section explains the analytical approach; the quality page describes the release file. ### 03 Squalane stability: a saturated oil still has limits URL: https://nutrition.rainwoodbio.com/products/fatty-acids/squalane/stability/ Reviewed: 2026-11-20 Squalane's saturated backbone removes squalene's main failure route — there are no double bonds to take up oxygen — but it does not make the oil immune to storage. Heat, light, moisture and contamination still move colour, odour and the moisture result, and a blend that contains an unsaturated oil can oxidise around it. The shelf life assigned to a lot comes from stability data on the pack and the storage condition actually sold. In one lineSaturation removes the oxidation chemistry that governs squalene, but heat, light, moisture and a poor seal still decide how long a squalane lot keeps its colour and odour. ## The sealed pack is the first barrier The moisture limit of ≤0.1% is checked at release, and it can move afterwards. Squalane does not dissolve water; water enters as droplets or films during filling, or condenses into a part-used container. The result is haze, a cloudy meniscus or a Karl Fischer figure above the limit, and none of those shows up in the assay. The amber bottle and the HDPE drum are light and moisture barriers, not guarantees. Keep the closure and the neck clean, keep the headspace small, and write the opening date on the drum. A drum moved out of a cold store should be allowed to equilibrate before it is opened, so that condensation does not form on the oil surface. Colour and odour are the early indicators. The catalog window runs from colourless to pale yellow, which is wide; a distinct yellow cast or a new odour is worth investigating while the assay and the iodine value still pass. Those two lines describe the molecule, not the freshness of the pack, and they will not report a change that has happened at the surface. ## Blends and emulsions, where the oil is dispersed There is no aqueous solution of squalane to stabilise. The oil is insoluble in water and is used neat, as the oil phase of an emulsion, or as one component of an oil blend, and each of those formats adds a failure route that the neat oil does not have. In an emulsion the oil is divided into droplets. The interface is where oxygen, metal ions and heat meet the oil, and a metal-sequestering agent can matter as much as the antioxidant. In a blend, the other oils bring their own unsaturation; an oil with a high peroxide value can pull the mixture into oxidation while the squalane itself stays unchanged. The antioxidant, where one is used, should be chosen for the whole oil phase. Heat is the third factor. A hot-fill step or a pasteurisation hold exposes the oil to temperatures the warehouse never reaches, and a softgel shell can transfer moisture over months even though the fill is anhydrous. Bulk data does not answer a question about a finished format. ## What changes in storage Storage factors for squalane and the control for each | Factor | Effect on the oil | Control | Heat | Colour darkens; odour can shift | Cool store; short heat exposure | Light | Accelerates colour change in clear packs | Amber bottle; opaque drum; dark store | Oxygen | Slow for the saturated oil; faster in an unsaturated blend | Small headspace; sealed pack | Metal ions | Catalyse breakdown at an interface | Stainless-steel contact; avoid iron and copper | Moisture | Haze and a rising Karl Fischer figure | ≤0.1%; dry store; closed pack | Contamination | Dust, fibres and odour | Clean filling; closed pack The factors interact. A half-empty bottle in a warm, bright room has heat, light and a large oxygen headspace at once, and the colour will move before any instrument result does. ## Designing the study around the pack The pack comes first, then the conditions. A common design uses 25 °C/60% relative humidity for warehouse storage, 30 °C/65% relative humidity for a warmer market, and 40 °C/75% relative humidity as the stress arm, with a light-exposure arm alongside. The stress arm is there to find the failure mode quickly; it does not set the shelf life by itself. The test panel should cover appearance, colour and odour, assay, refractive index, iodine value, moisture and microbiology. Peroxide value is worth keeping even for a saturated oil: a rising figure is evidence that an unsaturated oil has entered the lot or the blend. Report each result at each time point rather than a single pass statement, and state which pack and which lot family were studied. Study the pack the customer will receive. A 25 kg drum and a 1 kg bottle differ in headspace, in surface-to-volume ratio and in how often they are opened, and those differences belong in the data rather than in an assumption. ## What the finished product adds A softgel brings the shell into contact with the fill, and the shell can donate or take up moisture. Check the fill's colour, odour and moisture at release and after storage, and inspect the shell for brittleness or leakage. An oil blend needs a compatibility check and an antioxidant plan covering every oil in the phase. A topical emulsion adds emulsifiers, preservatives and an aqueous phase with its own pH. The oil's own stability is the starting point; the emulsion has to be tested as a product. The formulator decides whether an overage is needed, and that decision belongs with the product's stability data rather than with the ingredient certificate. ## How the retest period is assigned No single shelf-life number is published here. The figure depends on the container, the storage condition and the test panel, so it is assigned pack by pack and recorded in the specification, traceable to the stability file. A number quoted without those three is not a shelf life. When the retest period ends, re-test the retained sample before extending use. Do not extend by assumption, and do not apply a bulk figure to a repacked bottle or a finished softgel. For the standard packs, see the product hub. The COA page covers release testing, the MOQ page covers pack sizes and lead time, the methods section introduces the analytical tests, and the quality page describes the release workflow. ### 04 Ordering squalane: MOQ, packs and lead time URL: https://nutrition.rainwoodbio.com/products/fatty-acids/squalane/moq/ Reviewed: 2026-11-20 Squalane is sold from 1 kg in an amber bottle; the production pack is a 25 kg HDPE drum, about 31 L at the oil's density of roughly 0.81 g/mL. Standard dispatch is quoted at 1–7 days from order confirmation. A quotation can be compared only when it names the material and assay, the pack, the destination and Incoterm, the documents and the intended use. In one lineThe minimum order is one kilogram because that bottle is a traceable lot: it can be sampled, tested and held back, which a decanted quantity cannot. ## Why the entry pack is 1 kg A kilogram of squalane is about 1.2 L. That is enough for a bench trial, a retained sample and an independent test, and it travels as a parcel rather than on a pallet. It is also a lot with a code, which is the property that matters: material decanted from a drum has a parent lot but not its own pack identity. The 25 kg drum is the production unit. It reduces handling per kilogram but commits inventory and a longer storage period, and every opening adds moisture and headspace. For a buyer who uses a few kilograms a month, a smaller pack used up quickly can be better quality practice than a drum that stands open. ## Packs and the format question Squalane packs and what each is for | Pack | Net weight | Approximate volume | Where it fits | Handling | Amber bottle | 1 kg | 1.2 L | Trial, sample, small batch | Light barrier; keep closed; label carries the lot code | HDPE drum | 25 kg | 31 L | Production | Tight closure; record the opening date; lot code on drum and label | Split from a drum | Below 1 kg | — | Bench work only | Not a catalog pack; parent lot on the split record The catalog form is the oil. A powder is not available as a packing option because there is no powder grade; a carrier-based solid would be a new specification with its own carrier, oil load and certificate. A topical-use separation is a grade decision rather than a pack decision, and it is quoted on request. ## Dispatch, and what lead time does not cover The 1–7 day window covers picking, documentation and dispatch. Transit, customs and the customer's own release sit outside it. A split pack or a topical-use separation adds time, and the quotation should show that separately rather than fold it into the standard window. Ask for a dispatch date rather than a range. The bottle usually ships as a parcel and the drum on a pallet, so the Incoterm decides who books what. The documents should travel with the goods. ## Six things a quotation should state A quotation that omits any of these is not comparable with another: - Material and identity. Squalane, CAS 111-01-3, with the feedstock declared. - Specification. GC assay, refractive index, iodine value, moisture, metals and microbiology, with the revision number. - Pack. 1 kg bottle, 25 kg drum, or a split that is described as a split. - Destination and Incoterm. Country, port or address, and the trade term. - Documents. COA, TDS, SDS, source statement and any market declaration required. - Intended use and market. Cosmetic, food, supplement or another use, and the market where it will be sold. The intended use is not small talk. A cosmetic file and a food or supplement file ask for different documents, and the quotation should be written against the one that applies. Commercial terms belong on the quotation itself. ## Qualifying with a sample Use the first bottle as a qualification lot. Test identity, assay, refractive index, iodine value, moisture and microbiology, and keep a portion from the same bottle. The lot code should link the sample, the certificate and the quotation; a sample without a lot code is a demonstration. A trial that needs less than a kilogram comes from a drum and is repacked under its own record. Ask for the split in writing and keep the parent lot number with the trial results. The oil on the bench and the oil in the next drum need not share a lot, and colour and moisture can differ between them. Check the sample on arrival as well. A bottle that has spent a fortnight in a warm parcel is the same lot, but it may no longer represent the next drum. ## What to settle before the first order The offer should carry the commercial terms and the quality terms on one page: trade term, dispatch window, specification revision, a certificate per lot, the retained sample, the retest period and the change-control route for feedstock, catalyst or pack. Agreeing that list before the first drum is easier than negotiating it after a failed lot. Decide in advance how a failed lot is handled. The route should be the retained sample and a joint re-test against the named method, with the referee laboratory and the cost allocation agreed in the quality agreement rather than after the dispute. A judgement based on a photograph of the oil is not a test. The catalog specification is on the product hub, the release tests on the COA page, and the market documents on the compliance page. The MOQ glossary entry defines the term, and the quality page describes the release workflow. ### 05 The regulatory file for squalane URL: https://nutrition.rainwoodbio.com/products/fatty-acids/squalane/compliance/ Reviewed: 2026-11-20 Squalane is usually placed on the market as a cosmetic ingredient, and that route supplies the default file; a food or supplement use is a different route that must be established for the material, the dose and the market. The specification describes the oil, but it does not choose the route. This page sets out the documents and checks that belong in the file, and the buyer's regulatory team confirms the route. In one lineThe specification describes the oil, but the use decides the file: a cosmetic route and a food or supplement route do not share the same evidence, and the destination decides which one applies. ## Four questions before a document is filed The file has to answer which material and specification version is being bought, which lot and certificate are being released, which limits and labelling rules apply to the finished product, and how changes to feedstock, process or pack are controlled. The certificate answers the lot question, the data sheet the specification, and the safety data sheet the handling. None of them answers the route question. The use comes first. A cosmetic ingredient is documented through a safety assessment and a product information file; a food or supplement ingredient is documented through food law and its own labelling rules. The same batch can serve either, but the files are built differently, and a certificate does not move from one to the other without review. The name is part of the file. Squalane and squalene are distinct substances with distinct CAS numbers, and a document that uses the names as synonyms has not identified the material. Keep the source statement, the allergen and GMO declarations, the residual-solvent statement and a versioned document list at the front of the folder. ## European Union For cosmetic use, Regulation (EC) No 1223/2009 sets the frame: a responsible person, a product information file with a safety report, labelling under the regulation, and notification in the CPNP before the product is placed on the market. The ingredient is assessed in the safety report, and the annexes should be checked for any current restriction. As of this review, the consolidated text is the reference. For food or supplement use, the framework starts from Regulation (EC) No 178/2002, Regulation (EU) No 1169/2011, Directive 2002/46/EC and Regulation (EU) 2023/915. Hydrogenation does not automatically remove a material from the novel-food framework: its status under Regulation (EU) 2015/2283 has to be checked against the current catalogue and any authorisation for the intended use before the specification is treated as market-ready. Great Britain applies its own cosmetic and food rules; Northern Ireland follows the EU framework. The delivery address decides which file is needed, and the label should match that decision. ## United States A cosmetic use is governed by the Federal Food, Drug, and Cosmetic Act and the cosmetic labelling rules in 21 CFR 700. No pre-market approval applies to a cosmetic as such, but the brand owns the safety of the product and its ingredients, and a claim that turns the product into a drug changes the analysis. A supplement use brings the dietary-supplement framework, including 21 CFR 111, while a conventional food use needs a food-additive or GRAS basis. The supplier should state the basis it relies on and identify the supporting document. The buyer checks that the basis reaches the finished product, the dose and the claim, and that the label's source statement is supported. As of this review, the current text governs. ## Contaminants and the finished-product calculation A drum result is not a finished-product result. The table pairs the catalog limits with the checks that a supplement file usually needs; the destination text and the daily dose set the final figure, while a cosmetic route relies on the safety assessment rather than a food limit. Contaminant limits and what the finished-product file must show | Parameter | Catalog limit | What the file should add | Lead (Pb) | ≤3 mg/kg | Lot result, method and the dose calculation | Arsenic (As) | ≤2 mg/kg | The agreed market or customer limit | Cadmium (Cd) | ≤1 mg/kg | Lot result; check the category in the current text | Mercury (Hg) | ≤0.1 mg/kg | Lot result and method | Moisture | ≤0.1% | Haze and shelf-life check on the finished product | Process contaminants | — | Mineral-oil and PAH statements where required Because the feedstock is a refining stream, process contaminants deserve a direct question. A statement, a result or a justified absence is acceptable, but it should be in the file before shipment. Ask about mineral-oil hydrocarbons and about 3-MCPD esters where the feedstock is a refined oil; those belong to the feedstock and the refining step, not to the hydrogenation. Convert with the dose. A limit per kilogram of oil and a limit per daily serving are different numbers, and a low inclusion rate can keep a finished product inside a limit that the neat oil would exceed. ## Label and claims The label names the material and the quantity in the form the market requires. For a cosmetic, the INCI name is Squalane and the function is described under the common criteria for cosmetic claims; for a supplement, the claim rules are their own review with their own substantiation. No disease-related claim is made for this material here, and a certificate does not approve a claim. Squalane and squalene are separate names and are not interchangeable on a label; changing from one to the other requires a new label review. The reviewer confirms the wording against the product, the use and the market. ## The document set Core: specification, lot certificate, technical data sheet and safety data sheet. Cosmetic use adds the ingredient safety assessment and the product information file held by the responsible person. Food or supplement use adds the source declaration, allergen and GMO statements, the residual-solvent statement and any process-contaminant statement the market requires. The specification should name the source, the assay basis, the iodine-value limit and the pack, and the certificate should match its revision. Halal, kosher and customer-specific declarations are supplied where available rather than assumed. Catalog data sits on the product hub, the certificate is explained on the COA page, the analytical evidence is on the identity page, the unsaturated material has its own squalene page, the tests are introduced in the methods section, and the release file is described on the quality page. None of this replaces the route decision. The file is complete only when the use, the market and the material are named together. ## Checklist before the first order - Material, CAS number, source and specification revision are stated. - The use — cosmetic, food or supplement — is written into the file. - The lot certificate, TDS and SDS are present and current. - Source, allergen, GMO and residual-solvent statements are attached. - The contaminant figures are recalculated for the daily dose. - The label and claim review is recorded against the destination. - Feedstock, process and pack changes have a written route. - The quotation, specification and certificate cite the same revision. ### 06 How to prove a squalane lot is squalane URL: https://nutrition.rainwoodbio.com/products/fatty-acids/squalane/identity/ Reviewed: 2026-11-20 A squalane lot can be called squalane only when three results agree: the GC assay, the refractive index and the iodine value. Appearance and colour cannot separate it from squalene. The iodine value is the decisive line: it measures the double bonds that hydrogenation was supposed to remove. The other two lines say which hydrocarbon is present and how much of it the oil contains. In one lineIdentity here is an agreement, not a single peak: GC names the hydrocarbon, the refractive index supports it, and an iodine value at or below 1.0 is what distinguishes the saturated form from squalene. ## The identity layers Each layer below is a separate question with its own evidence. A supplier who answers the first and stops has described a label, not a lot. Layers of squalane identity | Layer | Question | Evidence | What it establishes | Document | Is the material named? | Name, CAS number, formula, source | Paperwork, not the oil | Chromatography | Is the main peak squalane? | Retention against a squalane standard | The hydrocarbon | Refractometry | Does the optical value fit? | Refractive index at 20 °C | Consistency with the identity | Iodimetry | Is any unsaturation left? | Iodine value by Wijs | Whether hydrogenation completed | Mass balance | Is the oil diluted? | Assay, moisture and iodine value together | Whether the figures agree | Origin | Is the feedstock as claimed? | Source record and traceability | The supply chain, not the molecule ## The arithmetic behind the iodine value Squalane is saturated, so its theoretical iodine value is zero and the catalog allows ≤1.0 g I₂/100 g. Squalene has six double bonds and titrates near 371. That gap turns the gate into a composition limit: 1.0 ÷ 371 ≈ 0.0027, so a passing lot can contain no more than about 0.3% unsaturated material measured as squalene. The ratio runs the other way as well. A certificate with a 95.0% assay and an iodine value of 0.4 cannot have 5% squalene in the balance, because that would titrate near 18.5 and fail. The 5% must be saturated material — hydrogenation isomers, another hydrocarbon, or a residue that does not react with iodine. That is consistent with a complete reaction and inconsistent with a cut. The physical figures move with the chemistry. Hydrogenating six double bonds raises the molar mass from 410.72 to 422.81, a gain of about 2.9%, and lowers the refractive index into the 1.450–1.455 window. A result near 1.494 would point back towards squalene however good the assay looked. ## Why diffraction is the wrong test for this oil Squalane is liquid at ordinary temperatures, so it has no lattice to diffract. A scan of the neat oil gives an amorphous halo, and a report that says “XRD conforms” without a reference phase says very little. The method answers questions about solids. It becomes useful when the material is not the neat oil: a carrier-based solid, a blend with a crystalline excipient, or a suspicion that a solid diluent has been added. In those cases the pattern describes the matrix, while the squalane itself is still measured by GC, refractometry and iodimetry. A disputed lot is better served by a GC run with both standards, a refractive index with the temperature recorded, and an iodine value than by a diffraction scan of a liquid. ## What adulteration looks like Squalane substitutions and the signals | Adulterant | Effect on the figures | What exposes it | Squalene or partial hydrogenation | Iodine value rises; a squalene peak appears | Iodine value and GC | Mineral oil | The chromatogram shows a series of peaks instead of one | GC-MS, refractive index, UV absorbance | Vegetable oil | Esters appear; the saponification value rises | FTIR, GC after transesterification | Ester or silicone oil | Carbonyl or silicon-oxygen bands appear | FTIR, GC-MS | Water | Moisture above the limit; the oil hazes | Karl Fischer The likely substitution is the one that looks the same in the bottle. A partly hydrogenated oil can pass a 95% assay and still carry enough unsaturation to fail the iodine value, which is why that line belongs on the release panel. A mineral-oil cut is subtler. The physical figures can sit close to squalane, but the chromatogram shows a boiling-range series instead of a single peak, and the ultraviolet absorbance can rise where a pure hydrocarbon oil is transparent. Source claims are separate again: the certificate proves the molecule, while the origin record proves the feedstock. ## How to write the identity into the specification - “Squalane, olive-derived, CAS 111-01-3, C30H62.” - “Assay ≥95.0% by GC, with the calibration mode and the standard stated.” - “GC retention and refractive index 1.450–1.455 at 20 °C for identification.” - “Iodine value ≤1.0 g I₂/100 g by Wijs, reported as a measured figure.” - “Moisture ≤0.1% by Karl Fischer; metals and microbiology as listed.” - “Residual squalene reported, with a limit agreed for the grade.” - “Source and hydrogenation step declared; lot code traceable to the retained sample.” ## Five questions for the supplier - Which standard calibrated the GC assay, and how was the peak integrated? - At what temperature was the refractive index measured? - What iodine value did the lot return, and by which titration method? - How much residual squalene is present, and how does that figure compare with the iodine value? - If we dispute a result, will you re-test the retained sample jointly? The answers, not the headings, make the identity file. A single assay percentage is the weakest version of that file. The catalog specification is on the product hub; each figure is placed on the certificate by the COA page; source and use options are compared on the grades page; the saturated and unsaturated forms are set out in the level-four comparison; the unsaturated material has its own squalene page; the analytical approach is introduced in the methods section; the release file is described on the quality page. ### 01 What the COA for calcium caseinate actually contains URL: https://nutrition.rainwoodbio.com/products/protein-collagen/calcium-caseinate/coa/ Reviewed: 2026-11-20 A certificate for a calcium caseinate lot reports appearance, identification, protein by Kjeldahl with N × 6.38 on a dry basis, calcium by ICP-OES or titration, fat, ash, moisture, the heavy-metal panel, microbiology and particle size. The protein figure says how much casein is present; the calcium figure says which caseinate it is. Both need their method, and the protein needs its basis: the specification describes the grade, and the result belongs to the drum. In one lineRead the certificate on the protein with its nitrogen factor and dry basis, the calcium with its method, and the moisture that converts the dry-basis protein to the as-is powder. ## What the sheet has to list The parameter list follows the agreed specification, not a certificate template. Composition and physical lines answer what the powder is and how it handles; contaminants and microbiology answer what came with it. For calcium caseinate, two lines carry more weight than the rest: the protein with its factor and basis, and the calcium that separates this salt from sodium caseinate and from a micellar grade. Composition and physical parameters · calcium caseinate, catalogue limits | Parameter | Method | Release limit | Appearance | Visual | Off-white to cream powder | Protein (dry basis) | Kjeldahl, N × 6.38 | ≥90.0% | Calcium | ICP-OES or complexometric titration | 1.0–1.5% | Ash | Gravimetric, furnace | ≤4.0% | Fat | Solvent extraction | ≤1.5% | Moisture | Loss on drying | ≤6.0% | Identification | Protein profile | Conforms to the reference | Particle size | Sieve | ≥95% through 80 mesh An identification line that says only “conforms” is weak on its own: the protein profile shows casein, and the calcium line shows the salt. Contaminants and microbiology · calcium caseinate, catalogue limits | Parameter | Method | Release limit | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Total plate count | Plate count | ≤1,000 cfu/g | Yeast and mould | Plate count | ≤100 cfu/g | E. coli | Enrichment | Absent | Salmonella | Enrichment | Absent The method column is part of the evidence. A calcium result without its technique cannot be compared across laboratories, and a plate count depends on medium, temperature and time. ## Dry basis, the nitrogen factor and the calcium figure Kjeldahl measures nitrogen and converts it to protein with a factor. For milk protein the factor is 6.38, which assumes nitrogen at about 15.7% of protein mass; the general 6.25 assumes 16%. A 90.0% result calculated with 6.38 becomes about 88.2% if the same nitrogen is multiplied by 6.25. The factor belongs beside the number, not in a method footnote. The basis moves the figure further. This specification is on a dry basis, so the 6.0% moisture ceiling is outside the protein calculation. At that ceiling, 90.0% dry basis corresponds to 84.6% as-is (90.0 × 0.94), and a 20 g serving supplies about 16.9 g of protein. A purchase order that drops the basis is out by more than five percentage points before any analytical variation is counted. Calcium is a separate measurement, not a conversion of the protein. The catalogue range is 1.0–1.5% measured as elemental calcium, and the certificate should state the method: ICP-OES, or complexometric titration with EDTA. A calcium oxide figure is not the same number. At 1.2% calcium, a 20 g serving carries about 240 mg of calcium, which belongs in the label calculation. ## Catalogue limit, release limit and lot result Three statements get confused. The catalogue limit is the window this grade is offered inside; the release limit is the narrower window agreed for a customer or a market; the lot result is what the laboratory measured. The first two are commitments, and only the third is evidence. What the result column should contain | Parameter | Catalogue limit | Result column | Protein | ≥90.0% dry basis | A measured percentage with the factor, basis and moisture | Calcium | 1.0–1.5% | A measured percentage by ICP-OES or titration | Ash | ≤4.0% | A measured percentage, read beside the calcium figure | Moisture | ≤6.0% | A measured percentage | Heavy metals | Per element | A measured figure in mg/kg for each element | Particle size | ≥95% through 80 mesh | The measured percentage through the sieve “Conforms” is a conclusion, not a measurement; the reader should be able to reach it from the numbers on the page. ## What moves between lots Calcium caseinate starts with acid casein, and the casein starts with skim milk. Feed, stage of lactation and season move the protein and mineral content of the milk, and precipitation and washing only narrow that variation. The neutralisation sets the calcium: more calcium hydroxide bound to the protein lifts the calcium figure, and an under-neutralised lot can read low on calcium while the protein stays inside its window. Drying shifts moisture, colour and dispersibility. A hotter dry gives free flow but slow wetting; a gentler dry holds more moisture and disperses more easily. Milling and sieving move the particle-size result, so the 80 mesh figure can change without any change in the protein chemistry. Trends matter more than one result near an edge. Protein drifting low while ash climbs can point to a different casein wash; calcium climbing while protein stays steady can point to a neutralisation change. The calcium-to-protein ratio is the useful trend line: at 1.0–1.5% calcium and 90.0% protein, the powder carries about 12–18 mg of calcium per gram of protein. ## When an outside laboratory earns its fee Independent testing is worth it for a new source, a first shipment into a regulated market, a salt form the certificate does not prove, or a disputed result. The panel should answer the open question rather than repeat the sheet: protein by Kjeldahl, calcium, sodium and phosphorus by ICP-OES, ash, moisture, an amino acid profile, and the microbiological set. The mineral panel separates the forms. Calcium at 1.0–1.5% with low sodium is consistent with calcium caseinate; a sodium figure near 1.0–1.5% points to sodium caseinate; a higher ash with native calcium and phosphorus points to a micellar grade. A milk-protein ELISA confirms that the powder is milk-derived, but it cannot separate the three, because all three are milk protein. Add a melamine and cyanuric acid screen when the protein figure is the commercial driver, because a nitrogen-rich adulterant lifts Kjeldahl without adding protein. Chain of custody matters as much as the panel: the sample tested should be the sample retained, and the report should name the lot. The methods section explains what each technique proves; the quality page describes how the sample and lot record are kept. ## Putting two offers side by side Put six lines side by side: protein with its factor and basis; calcium and ash with the methods; fat and moisture; particle size and a dispersion result; the allergen statement; and the site and lot traceability. Two offers that agree on 90% protein and disagree on calcium, ash or moisture are not the same powder. The second layer is the record: who made the lot, which casein batch went in, and what retained sample exists. The catalogue specification is on the calcium caseinate product page; the tests that separate the salt forms are on the identity page; the market rules are on the compliance page; the other salt is described on the sodium caseinate page; and the native-micelle alternative is on the micellar casein page. ### 02 Calcium caseinate, sodium caseinate or micellar casein: choosing the form URL: https://nutrition.rainwoodbio.com/products/protein-collagen/calcium-caseinate/grades/ Reviewed: 2026-11-20 Calcium caseinate is one of three casein materials sold for supplements and foods. The two caseinates, calcium and sodium, read 90% protein on a dry basis; micellar casein reads 80%. The protein line alone cannot identify the material, so the grade decision turns on the cation, the process and the label name. In one lineThe grade is the form of the casein: calcium caseinate, sodium caseinate and micellar casein differ in the cation, the process and the label, so the powder cannot be substituted on protein percentage alone. ## Why the process is the grade Casein is a family name. CAS 9000-71-9 identifies casein rather than a physical form, and the caseinate salts are listed separately: calcium caseinate is 9005-43-0 and sodium caseinate 9005-46-3. The process creates the form, so the grade is a route and the properties that come with it. Both caseinates start with acid casein. Skim milk is acidified to about pH 4.6, where the casein precipitates; the curd is washed, which removes lactose and much of the colloidal calcium phosphate, and dried. The intermediate is neutralised with calcium hydroxide or sodium hydroxide and spray-dried. The acid step destroys the micelle, and the cation used to neutralise the casein remains in the powder. Micellar casein takes the other route. Milk is filtered through a membrane that holds back the casein micelle and lets lactose, whey protein and part of the minerals pass; the retentate is washed, concentrated and spray-dried. The micelle, with its native colloidal calcium phosphate, is still there. A certificate that says only “casein” has not named the material. ## The three casein forms side by side Casein forms · what changes with the grade | Point | Calcium caseinate | Sodium caseinate | Micellar casein | CAS number | 9005-43-0 | 9005-46-3 | 9000-71-9 | Process | Acid casein, calcium hydroxide | Acid casein, sodium hydroxide | Microfiltration of skim milk | Protein, dry basis | ≥90.0% | ≥90.0% | ≥80.0% | Cation | Calcium 1.0–1.5% | Sodium 1.0–1.5% | Native micellar calcium; not specified as a range here | Ash | ≤4.0% | ≤4.0% | ≤7.0% | In water | Dispersible; opaque, slightly viscous | Freely soluble; slightly turbid | Dispersible; opaque, micellar | Label name | Calcium caseinate; milk declared | Sodium caseinate; milk declared | Micellar casein; milk declared Two cautions follow. A similar protein figure does not mean a similar ash or mineral load: the cation moves the nutrition panel, and the ash ceiling is the quickest sign of a caseinate. The calcium figures are also not directly comparable. Calcium caseinate carries the calcium added at neutralisation; micellar casein carries the native calcium of the micelle, which the micellar sheet does not state as a range. ## The powder, the mixer and the dispersion The catalogue form is a spray-dried powder at 80 mesh, with at least 95% passing, and it can be instantized on request. Agglomeration builds larger, porous particles that wet faster and throw less dust; it also lowers bulk density, which changes fill weight and scoop volume. A standard grade is simpler to make and harder to disperse without lumps. Calcium caseinate disperses rather than dissolving. The dispersion is opaque and slightly viscous, and it is not a clear solution at any ordinary solids load. A formulator who expects the clarity of sodium caseinate should start with the sodium salt; in a bar or a shake, the colloidal body can be the point. pH decides as much as the powder. At about pH 4.6 the casein reaches its isoelectric point and aggregates; an acidified drink needs a stabiliser and a trial with any casein form. At neutral pH the dispersion is stable but viscous, and heat can raise the viscosity further. Test the mixer, the solids load and the heat process together; a result in water does not predict the finished drink. The methods section explains the dispersion and mineral tests. ## How much protein and calcium the formula carries At 90.0% protein on a dry basis and 6.0% moisture, the powder is about 84.6% protein as weighed. The calcium range of 1.0–1.5% makes the same serving a calcium source as well as a protein source. Protein and calcium per serving · calcium caseinate at catalogue limits | Powder | Protein as weighed | Calcium | 5 g | 4.2 g | 50–75 mg | 10 g | 8.5 g | 100–150 mg | 20 g | 16.9 g | 200–300 mg | 30 g | 25.4 g | 300–450 mg A 20 g serving supplies 200–300 mg of calcium, which is 25–38% of the EU nutrient reference value of 800 mg and 15–23% of the US Daily Value of 1,300 mg. A 30 g serving supplies 300–450 mg. The calcium is real and belongs on the nutrition panel. It is not a calcium premix. At 1.0–1.5% calcium the powder is mostly protein, while a mineral ingredient delivers calcium at tens of percent. A formulator who needs 500 mg of calcium from this powder would need 33–50 g of it. Use the caseinate for protein and body, and calculate the calcium it brings. ## Specification lines for the grade - Form and process: calcium caseinate, acid casein neutralised with calcium hydroxide, spray-dried. - Protein ≥90.0% dry basis, Kjeldahl N × 6.38; calcium 1.0–1.5% as elemental calcium, method named. - Moisture ≤6.0%, ash ≤4.0%, fat ≤1.5%; ≥95% through 80 mesh or the instantized equivalent. - Dispersion test agreed with grams per 100 mL, water temperature, shear and standing time. - Milk allergen statement and the contaminant limits on the COA page. Dispersion is the line most often left vague. Agree the test and the result format; without them, two suppliers can both claim good dispersibility and mean different things. ## When another casein form is the better choice Choose sodium caseinate when the formula needs a true solution, a high solids load in a neutral drink, or the emulsifying behaviour of the sodium salt, and the label can carry the sodium. Choose micellar casein when the label has to say micellar, when the native micelle is wanted, and when the plant can hydrate it. Choose calcium caseinate when a colloidal body is wanted, when the calcium fits the label, or when the sodium load has to come down. None of these choices should be made on the protein percentage alone, because the two caseinates read the same 90%. The decision is four lines side by side: form and process, cation and ash, dispersion in the real mixer, and ingredient name on the label. The calcium caseinate versus micellar casein page takes the solubility, mineral and label questions further; the product hub carries the catalogue specification; the sodium caseinate page and the micellar casein page give the other two sides. The quality page describes release. ### 02.1 Calcium caseinate vs micellar casein: solubility, mineral load and the label URL: https://nutrition.rainwoodbio.com/products/protein-collagen/calcium-caseinate/grades/calcium-caseinate-vs-micellar-casein/ Reviewed: 2026-11-20 Calcium caseinate and micellar casein both disperse in water rather than dissolving, so solubility is not the dividing line most buyers expect. The line is the process: calcium caseinate is acid-precipitated casein neutralised with calcium hydroxide, while micellar casein is separated from skim milk by microfiltration with the micelle intact. That changes the protein level, the calcium and the name the label must carry. In one lineBoth forms disperse rather than dissolve, so the real difference is the process behind the powder, the role of the calcium and the ingredient name the label must use. ## Two routes, two materials Calcium caseinate starts with acid casein. Skim milk is acidified to about pH 4.6, where the casein precipitates; the curd is washed, which removes lactose and much of the colloidal calcium phosphate, and dried. The acid casein is then neutralised with calcium hydroxide, which dissolves the protein, and spray-dried. The micelle does not survive the acid step, and the calcium added at neutralisation stays in the powder. Micellar casein takes the membrane route. Skim milk is passed through a microfiltration membrane that holds back the casein micelle and lets lactose, whey protein and part of the minerals pass into the permeate. The retentate is washed with diafiltration, concentrated and spray-dried. The micelle, with its native colloidal calcium phosphate, is still there, and the protein is concentrated without dissolving the structure. The catalogue grade is ≥80.0% protein on a dry basis, with lactose ≤1.0% and ash ≤7.0%; calcium caseinate is ≥90.0% protein, ash ≤4.0%, and carries calcium at 1.0–1.5%. The process is the ingredient name; a certificate that says only “casein” has not named the powder. ## Solubility: both disperse, neither dissolves Calcium caseinate disperses to an opaque, slightly viscous colloid. Micellar casein also disperses to an opaque colloid, but it swells and hydrates more slowly and needs more shear and time to reach its final viscosity. Neither gives a clear solution at an ordinary solids load; a formulator who wants clarity should start with sodium caseinate, which is freely soluble and only slightly turbid. pH decides as much as the powder. Near pH 4.6 both forms approach the isoelectric point and aggregate, so an acidified drink needs a stabiliser and a trial whichever form is used. At neutral pH the calcium caseinate dispersion is stable and comparatively thin, while the micellar dispersion is thicker and builds body as it hydrates. Heat raises the viscosity of both, so a ready-to-drink process needs a matrix trial. In the mixer, calcium caseinate wets faster at lower shear; micellar casein needs the high-shear mixer and the hydration time. The methods section explains how a dispersion test is specified and run. ## The mineral load is not a ranking Calcium caseinate and micellar casein · what differs | Point | Calcium caseinate | Micellar casein | Process | Acid casein, calcium hydroxide | Microfiltration of skim milk | Protein, dry basis | ≥90.0% | ≥80.0% | Calcium | 1.0–1.5%, added at neutralisation | Native micellar calcium; not specified as a range here | Ash | ≤4.0% | ≤7.0% | Lactose | Not specified on this sheet; the acid wash removes most of it | ≤1.0% | In water | Opaque, slightly viscous dispersion | Opaque, micellar dispersion that swells | Label name | Calcium caseinate | Micellar casein The calcium figures are the part most often misread. Calcium caseinate carries the calcium added at neutralisation, which is why the catalogue can state a range. Micellar casein carries the calcium that stayed with the micelle, and the micellar sheet does not state a calcium range at all. A micellar lot can therefore carry more total calcium per 100 g than a calcium caseinate lot, even though only the caseinate has calcium added as the neutralising cation. The names describe the route, not a ranking of mineral content. The ash ceilings point the same way. The micellar grade allows up to 7.0% ash because it keeps the native minerals of the micelle; the caseinate allows 4.0% because the acid wash removes much of that load before the calcium is added back. A buyer who reads “calcium” as the higher figure has the comparison backwards; measure the element, not the word. ## The label: name, milk and calcium The ingredient declaration names the form: “calcium caseinate” or “micellar casein”. The two are different ingredients, and a pack cannot use one name while the drum contains the other. Milk is the allergen for both, so it has to be emphasised in the EU and the UK and declared as a major allergen in the US, whatever the lactose figure. “Dairy-free” is not available for either material. Calcium is where the label diverges. Calcium caseinate carries a stated range, so the calcium contribution can be calculated from the specification and confirmed on the lot: a 20 g serving at 1.0–1.5% supplies 200–300 mg, which is 25–38% of the EU reference value of 800 mg and 15–23% of the US Daily Value of 1,300 mg. Micellar casein's calcium is not on the catalogue sheet, so it has to be measured before it is declared. A micellar product may still carry a useful calcium figure — it just cannot be read from the specification. A product that uses either form as a major protein source is a milk product for allergen purposes, and a calcium claim has to meet the market's threshold on the finished product. The compliance page sets out the EU, US and UK rules, and the micellar casein page carries that grade's catalogue specification. ## Which format each form fits A bar is a moisture-migration problem. Both forms add body and firm the texture over shelf life, and both can brown when a reducing sugar and moisture are present; calcium caseinate disperses faster into a syrup, while micellar casein brings a thicker body at the same protein load. A stick pack is a dispersion problem: calcium caseinate wets faster and needs less shear in a shaker, while micellar casein can leave lumps unless it is agglomerated. A neutral ready-to-drink product is a heat and mineral problem. Calcium caseinate gives a thinner dispersion and a stated calcium load; micellar casein gives more body but needs high-shear hydration and a heat trial. ## Choosing between the two forms Choose calcium caseinate when the formula needs a stated calcium contribution, a faster dispersion at lower shear, or a thinner colloidal body, and when the label can name the calcium salt. Choose micellar casein when the label has to say micellar, when the native micelle and its mineral pattern are wanted, and when the plant has the shear and the time to hydrate it. Choose sodium caseinate when true solubility or a high solids load matters more than either. Make the decision on four lines: process and protein level, calcium and ash, dispersion in the real mixer, and the ingredient name on the label. A switch between the two forms is a new specification, a new dispersion trial and a new label, not a substitution at the same weight. The grades page places this comparison in the wider casein range; the sodium caseinate page gives the soluble alternative; the product hub and the quality page carry the catalogue and release detail. ### 03 Calcium caseinate stays dry; the dispersion is the fragile format URL: https://nutrition.rainwoodbio.com/products/protein-collagen/calcium-caseinate/stability/ Reviewed: 2026-11-20 Calcium caseinate is a spray-dried milk protein powder and is stable when dry, sealed and cool. The powder is hygroscopic; the dispersion is the fragile format, because water, heat and pH act on it together. The shelf life is assigned from stability data for the exact pack and storage condition, not from the certificate. In one lineCalcium caseinate stays dry in a sealed pack; the dispersion is the fragile format, where water, heat and pH act together. ## Moisture, caking and colour The catalogue sets moisture at ≤6.0%. The figure is a release limit, not an allowance for storage. Once the foil pouch is opened, the powder picks up moisture from the air; the loss on drying rises, the as-is protein and calcium figures fall, and the powder begins to cake. A closed pack and a dry store matter as much as the printed limit, even though neither appears on the certificate. Heat accelerates the change. A sealed pack in an ambient warehouse is usually fine; a hot loading bay, a car boot or a roof space is not. After cold storage, let the pack reach room temperature before opening it, or condensation will form on the powder. A drum that has been opened and closed repeatedly is a different storage case from a sealed pouch. Colour is the visible signal. A cream powder that darkens, or develops a cooked or malty note, is showing the early stage of a browning reaction between the protein and a reducing sugar. The reaction needs moisture and heat, so a dry, cool store slows it. In a bar, where the protein sits beside glucose or fructose syrup, the same reaction can continue after the pack is sealed and is a shelf-life question for the bar rather than for the powder alone. ## The dispersion is not a solution Calcium caseinate disperses in water to give an opaque, slightly viscous colloid. It is not a true solution, and the difference matters for stability: the protein is present as particles and aggregates, so the physical state can change with heat, pH and time even when the chemistry does not. A dispersion that is thin at filling can thicken in the tank or in the bottle. pH is the first control. Near pH 4.6 the casein approaches its isoelectric point and aggregates; an acidified drink needs a stabiliser and a trial whatever the casein form. At neutral pH the dispersion is stable but viscous, and a heat step raises the viscosity further. A ready-to-drink process adds a heat load that the powder never sees, so a bulk-powder result does not transfer to a beverage. Water activity is the second control. A high-protein dispersion is a good medium for microorganisms, and a hold tank at ambient temperature is a microbial risk as much as a chemical one. Validate the hold time, keep the process cold where the formula allows, and test the microbiological set on the finished product as well as on the powder. ## What drives change during storage Factors that move calcium caseinate during storage | Factor | What it does | Control | Moisture | Raises loss on drying; caking; lowers as-is protein and calcium | Sealed pouch or lined drum; dry store | Heat | Accelerates browning and viscosity change | Controlled store; cool process | pH | Aggregation near pH 4.6; viscosity shifts | Buffer and trial the matrix pH | Reducing sugars | Browning with the protein at raised moisture | Control water activity and storage temperature | Mineral salts | Calcium-phosphate or calcium-citrate precipitation | Trial the salt system; check sediment | Microorganisms | Growth in a wet dispersion or a wet blend | Process control; hold-time validation | Shear and time | Thickening or thinning of the dispersion | Fix the mixer and the hold time These factors are not independent. A warm, humid store plus a reducing sugar in the bar is worse than either alone, and a neutral dispersion held warm combines the microbial and the viscosity risks. The useful stability question is not “is calcium caseinate stable?” but “stable in which pack, at which condition, for how long?” ## Running a stability study A useful protocol states the pack, the storage condition, the time points and the tests. A warehouse study uses 25 °C/60% relative humidity for the long term and 30 °C/65% for the intermediate condition; 40 °C/75% is the accelerated arm that stresses the pack. For a bar or a beverage, repeat the work in the matrix at the process pH and heat load, because the powder is only the starting point. Test protein and calcium at each point, with moisture, appearance, dispersibility or viscosity, and the microbiological set. Each result should appear in the report, not just a pass line, and the pack and lot family should be identified. A 1 kg pouch and a 25 kg drum have different surface-to-volume ratios, different headspace and different opening histories; the data belongs to the pack. ## The matrix changes the answer A bar is a moisture-migration problem over months. The protein can firm up, the colour can darken and the texture can move as water redistributes between the syrup and the protein. A stick pack is a barrier problem: the powder has to stay free-flowing after the pack is opened, and a pinhole in the foil is enough to start caking. A neutral ready-to-drink product is a heat and mineral problem: the dispersion has to survive homogenisation and the heat step without gelling, and the calcium has to stay in suspension. Ingredient interactions belong in the trial. Phosphate and citrate salts can change the calcium balance and cause sedimentation; an acidulant can move the pH toward the isoelectric point. Neither is a reason to avoid the ingredient, but neither is visible in a certificate. The COA page covers the release tests, and the MOQ page covers the packs that carry the barrier. ## How the retest period is assigned We do not publish a single shelf-life number for calcium caseinate, because the pack and the storage condition set it. The specification carries the retest period, and the stability file for that pack supports it. Without a pack, a condition and a test panel, a shelf-life figure is only a claim. Before extending the date, assay the retained sample again at the end of the retest period. Do not assume an extension, and do not apply a bulk figure to a container that has been repacked. The product hub lists the standard packs; the calcium versus micellar page covers the form choice; the sodium caseinate page gives the soluble alternative and the micellar casein page the native-micelle one; the methods section describes the analytical tests, and the quality page describes the release workflow. ### 04 Calcium caseinate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/protein-collagen/calcium-caseinate/moq/ Reviewed: 2026-11-20 Calcium caseinate is sold from a 1 kg foil pouch, with a 25 kg fiber drum for production. The standard dispatch window is 1–7 days. A quotation is only comparable when it names the salt and CAS number, the protein basis, the calcium figure, the pack, the destination and Incoterm, and the documents the importer will need. In one lineThe 1 kg pouch is the trial pack and the 25 kg drum is the production unit; the lead time and the documents belong to the same quotation as the powder. ## Why 1 kg is the floor One kilogram is enough for a bench trial, a retained sample and an independent check of the salt. It also travels as a parcel, which helps a formulator who needs powder before the production plan is fixed. The pouch has its own lot code, so the trial material can be traced to the batch it came from. Repacking below 1 kg breaks that chain. The powder is divided from a larger lot, handled again and given a new record, and the pack the buyer receives is no longer the pack that was made. A 25 kg drum cuts the handling per kilogram but ties up inventory for longer. The minimum follows the smallest traceable pack, not a volume target. ## Packs and powder forms Standard calcium caseinate packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Instantized powder | 1 kg or 25 kg | Faster wetting, less dust | Same chemistry; new particle profile Calcium caseinate is milled to 80 mesh, with at least 95% passing. Instantizing changes the powder, not the pack: the agglomerates wet faster and dust less, and the particle-size line moves. Order that form before the quotation, because it can add a production step to the schedule. ## Dispatch and transit The standard pack leaves 1–7 days after the order is confirmed. Picking, documents and handover to the carrier are inside that window; transit, customs and the customer's own release are outside it. A custom instantized lot gets its own date. Put the dispatch date in the order confirmation; a range is not a date. A pouch normally ships as a parcel and a drum as a pallet, and the Incoterm sets who books the freight and who clears entry. The COA and the other lot papers should be in the same shipment as the powder. ## What the quotation must state Six details make two offers comparable: - Salt and CAS number. Calcium caseinate, 9005-43-0. - Protein and calcium. The nitrogen factor, the dry basis, and the calcium method and result. - Amount and pack. 1 kg pouch, 25 kg drum, or an instantized form. - Delivery and Incoterm. Where it ships and on which trade term. - Paperwork. COA, specification, SDS, allergen statement, and any declaration the importer needs. - Use and market. The intended category and the country where it will be sold. A quotation that omits the market or the salt cannot be compared with another. The same powder can be inside the file for one destination and outside it for another. Commercial terms belong on the quotation. ## A sample with a lot code The 1 kg pouch is the lot a customer qualifies. Check the salt, protein, calcium, moisture and microbiology before scaling, and keep part of the same pack. The lot code should run from the pouch through the COA to the quotation. A trial below 1 kg is a split, not the catalogue pack. It comes from a larger lot, gets its own handling record and should not be called the 1 kg foil pouch. Keep the split's lot code with the trial report; the bench powder and the production drum may be different lots. ## Terms for the first order Put the commercial and quality terms on one page: Incoterm, pack, dispatch window, specification revision, one COA per lot, the retained sample, the retest period and the change-control route. A quality agreement signed before the first production order is easier than a conversation after a shortfall. If a lot falls outside the agreed specification, the evidence is the retained sample and a joint test against the named method. A photograph of the drum does not settle a calcium or protein result. The agreement should name the referee laboratory, say who pays for it, and set the return route before the first order. The catalogue ranges are on the product hub; the release tests are on the COA page; the pack and store question is on the stability page; the destination rules are on the compliance page; the micellar casein page and the sodium caseinate page show the other casein forms; the methods section explains the assays, and the quality page describes release. ### 05 The regulatory file for calcium caseinate URL: https://nutrition.rainwoodbio.com/products/protein-collagen/calcium-caseinate/compliance/ Reviewed: 2026-11-20 Calcium caseinate is a milk protein food ingredient with a long history of use, so permission is rarely the obstacle. The file has to carry the edible-caseinate standard, the milk allergen, the calcium the powder brings to the nutrition panel, and the wording of any protein or calcium claim. The buyer's regulatory team confirms the destination route. In one lineThe regulatory file turns on three things: the edible-caseinate standard, the milk allergen and the calcium the powder brings to the nutrition panel. ## The four checks in the file Four checks make up the file. Is the material a permitted ingredient in the destination? Is the milk allergen declared? Are the contaminant results inside the limit for the product as sold? Does the label and claim wording match the form, the dose and the market? Each has a different owner; a file that answers three is incomplete. Keep the specification, COA, allergen statement and artwork on one revision. The COA page shows the lot document, and the identity page covers the analytical evidence. ## European Union Edible caseinates have their own standard. Directive (EU) 2015/2203 sets a minimum of 88% milk protein on the dried extract, of which at least 95% is casein, and a maximum moisture of 10%; the name must indicate the cation. The catalogue here specifies ≥90.0% protein on a dry basis and ≤6.0% moisture, so it sits above the protein floor and below the moisture ceiling, as of this review. Calcium caseinate is a food ingredient, not an additive, and carries no E number. Caseinates have a long history of use and are not, as far as this review can establish, a novel food; check the current novel-food catalogue for a new source. Supplements fall under Directive 2002/46/EC, which leaves protein ingredients to national rules. Allergen labelling follows Regulation (EU) No 1169/2011: milk is on Annex II and has to be emphasised. The nutrition declaration must include calcium when it is present in a significant amount — 15% of the nutrient reference value per 100 g or 100 mL, or per single-portion package. The calcium reference value is 800 mg, so 100 g of this powder at 1.0–1.5% calcium carries 125–188% of it. Regulation (EU) 2023/915 carries the contaminant limits; Regulation (EC) No 1924/2006 carries the claim rules. The EU regulatory notes gather the references. ## United States Calcium caseinate has a long history of use, but the GRAS affirmation at 21 CFR 182.1748 is written for sodium caseinate, not the calcium salt. The supplier should name the basis it relies on — a self-affirmed GRAS position, a GRAS notice covering the use, or the history of use supported by the FCC monograph — and the buyer keeps that statement on file. Milk is a major allergen under FALCPA, so the product must declare it in the ingredient list, a “Contains” statement, or both; a low lactose figure does not change that. Calcium is a dietary ingredient with a Daily Value of 1,300 mg, and it must be declared in the Supplement Facts panel when it supplies 2% or more of that value per serving; below that, a mineral may be declared as zero. A 5 g serving at 1.0–1.5% calcium supplies 50–75 mg, so the declaration is triggered at a small use level. Protein is declared against a 50 g Daily Value. The US regulatory note covers the framework. ## Contaminants and the finished-product calculation The contaminant panel is a finished-product calculation, not only a drum result; the destination text and the daily dose decide the limit. Contaminant limits to confirm for a calcium caseinate supplement | Element | EU supplement reference | US position | UK position | Lead (Pb) | 3.0 mg/kg | No federal supplement limit; state rules apply | Retained GB limit; check the current text | Cadmium (Cd) | 1.0 mg/kg | No federal supplement limit | Retained GB limit; check the current text | Mercury (Hg) | 0.10 mg/kg | No federal supplement limit | Retained GB limit; check the current text | Arsenic (As) | Not harmonised; member-state rules may apply | No federal supplement limit | Check the current GB text The EU figures come from Regulation (EU) 2023/915 and apply to supplements as sold; an ingredient sold to a food manufacturer is assessed against the limit for the food category it enters. Arsenic is not harmonised at EU level, so the specification has to state the limit it is tested against; the catalogue applies it as a customer limit. ## The label: the salt name, milk and calcium The ingredient name has to be the salt in the drum: “calcium caseinate”, with the cation named; “casein” alone does not identify it. Milk must be emphasised in the EU and the UK and declared as a major allergen in the US, whatever the lactose figure. The calcium follows the powder into the serving. At 1.0–1.5%, a 20 g serving carries 200–300 mg — 25–38% of the EU reference value of 800 mg and 15–23% of the US Daily Value of 1,300 mg — and a 30 g serving carries 300–450 mg. Those figures belong on the panel, calculated from the measured lot, not the catalogue midpoint. “Dairy-free” is not available for a milk protein, and “lactose-free” is a separate claim with its own basis. The sodium caseinate page and the micellar casein page show how the label questions change with the cation. ## Claims and wording No disease-related claim is permitted, and this site publishes the specification without a health claim. Protein claims: in the EU, “source of protein” requires 12% of the energy from protein and “high protein” 20%; in the US, 10% and 20% of the Daily Value. Calcium claims: in the EU, “source of calcium” requires 15% of the nutrient reference value per 100 g, or 7.5% per 100 mL for a liquid, and “high calcium” twice those values; in the US, “good source” is 10% of the Daily Value and “high” 20%. Confirm with the market whether a supplement is assessed per daily portion or per 100 g. A claim revision never reopens the specification; the certificate supports the material, not the claim. ## Documents to keep - Specification with the revision, the salt form, the protein factor and dry basis, and the calcium method. - Batch COA with results and methods, including calcium and the allergen statement. - SDS, TDS, animal-origin and BSE/TSE statement for a milk-derived material. - GMP, HACCP or ISO certificates for the site; origin, non-GMO, halal or kosher statements where required. - Third-party report and the label artwork, where the market asks. The product hub carries the catalogue specification; the methods section explains the assays; the quality page describes the release file. ## Pre-order checklist - Is the salt named on the specification and matched to the ingredient list? - Is milk declared, with no dairy-free wording? - Is calcium calculated from the measured lot and converted to the destination label? - Are the contaminant results inside the limit for the product as sold? - Is the supplier's regulatory basis for calcium caseinate on file? COA, specification and artwork should be the same revision. The market notes for the EU, the US and the UK sit beside the file, and the form comparison is on the calcium versus micellar page. ### 06 How we prove a calcium caseinate lot is the calcium salt URL: https://nutrition.rainwoodbio.com/products/protein-collagen/calcium-caseinate/identity/ Reviewed: 2026-11-20 A calcium caseinate lot is the calcium salt when four lines agree: the document names the form and CAS number, the protein figure fits casein, the calcium figure is in range with sodium low, and the solid state and dispersion match the process. Protein alone cannot separate calcium caseinate from sodium caseinate or from micellar casein, because all three are milk proteins with a similar protein figure. In one lineNo single number proves the calcium salt: the protein figure, the calcium and sodium panel and the process record have to agree. ## Four layers of evidence Naming the right material on a certificate is not the same as proving it. Each layer below asks a separate question and needs its own evidence. An answer that stops at the first layer describes the paperwork, not the drum. Four layers of calcium caseinate identity | Layer | Question | Test | What it proves | Document | Is the form and salt named? | Name, CAS number, process statement | Paperwork only | Protein | Is it casein? | Kjeldahl with N × 6.38, protein profile | The protein family | Cation | Is it the calcium salt? | Calcium and sodium by ICP-OES | The salt form | Solid state and performance | Is it a caseinate or a blend? | XRD, FTIR, ash, dispersion | Consistency of the powder The layers are cumulative. A protein figure near 90% on a dry basis is consistent with either caseinate; the calcium and sodium figures decide which one. The process statement explains why the cation is there, and the solid-state work catches a powder that was blended rather than neutralised. ## The calcium-to-protein ratio Calcium caseinate is a neutralised polymer, not a molecule with a fixed formula. The calcium load depends on the neutralisation and the washing, so there is no theoretical percentage to calculate from a molecular weight, the way there is for a simple salt. The catalogue sets the calcium at 1.0–1.5% and the protein at ≥90.0% on a dry basis, which puts the calcium-to-protein ratio at roughly 12–18 mg of calcium per gram of protein. That ratio is a consistency check, not an identity proof. A lot that reads 90% protein and 0.3% calcium is not the calcium salt at the declared load; a lot that reads 1.3% calcium and 75% protein has been diluted or carries extra calcium salt. Sodium is the second half of the check: a sodium figure near 1.0–1.5% beside a low calcium figure points to sodium caseinate, and a calcium figure with a higher ash and a native phosphorus level points toward a micellar grade. Read the figures on the same basis. Protein is on a dry basis; ash and calcium are usually reported on the powder as weighed. At 6.0% moisture, 90.0% dry-basis protein is 84.6% as-is, so the calcium-to-protein ratio calculated from an as-is protein figure will be higher than the ratio calculated from the dry-basis figure. The certificate should state both bases, or the comparison is out by the moisture. ## What XRD can and cannot prove X-ray diffraction asks whether the solid is crystalline and whether its pattern matches a reference. Spray-dried calcium caseinate is amorphous, so its diffractogram is a broad halo rather than a set of sharp peaks. That is useful, because a crystalline calcium salt added to lift the calcium figure — calcium carbonate, calcium citrate or a crystalline calcium phosphate — produces sharp lines that the protein does not. XRD neither assays purity nor measures the counter-ion. It cannot separate calcium caseinate from sodium caseinate, and it cannot quantify the protein. Ask for the reference pattern and the detection limit before reading a “match” statement, and read the result beside the calcium and sodium figures rather than instead of them. FTIR adds the protein amide bands and can show the difference between a protein powder and an inorganic blend; neither technique is a routine release test for this product. ## Where substitutions show up Common calcium caseinate substitutions and the signals | Adulterant | What it does | Signal | Test | Sodium caseinate | Same protein, different cation | Sodium 1.0–1.5%; calcium low | Calcium and sodium by ICP-OES | Micellar casein | Lower protein, native minerals | Protein near 80%; ash higher | Protein, ash, calcium and phosphorus | Calcium carbonate or citrate | Lifts calcium without protein | Sharp XRD lines; ash high; carbonate effervesces with acid | XRD, ash, acid test | Whey protein | Cheaper milk protein | Protein profile differs; amino acid pattern shifts | SDS-PAGE, amino acid profile | Starch or maltodextrin | Dilutes protein and calcium | Protein low; carbohydrate by difference | Protein, mass balance, iodine for starch | Melamine or other non-protein nitrogen | Lifts Kjeldahl without protein | Protein high; amino acid profile low | LC-MS/MS screen, amino acid profile Appearance is the weakest signal. The colour window is wide, and a blend can be made to match it. The stronger signals are the calcium and sodium figures, the ash, the XRD pattern and the amino acid profile. A certificate that reports appearance and protein but not the cation has left the most likely substitution untested. ## Specification lines for identity - “Calcium caseinate, CAS 9005-43-0, produced by neutralising acid casein with calcium hydroxide and spray-drying.” - “Protein ≥90.0% on a dry basis by Kjeldahl with N × 6.38; state the factor and the basis.” - “Calcium 1.0–1.5% as elemental calcium by ICP-OES or titration; report the method.” - “Sodium by ICP-OES as an identity check; agree a limit if the salt form is disputed.” - “Moisture ≤6.0%, ash ≤4.0%, fat ≤1.5%; ≥95% through 80 mesh or the instantized equivalent.” - “No crystalline calcium salt above the agreed limit; milk allergen declared.” ## Five questions to ask - Which salt is this lot, and which CAS number is on the certificate? - What are the protein result, the nitrogen factor and the basis? - What are the calcium and sodium results, and which method produced them? - Was the lot made from acid casein neutralised with calcium hydroxide, and can the process record be shown? - If the lot is disputed, will you accept a joint re-test on the retained sample, including XRD and the mineral panel? Those five answers, taken together, make an identity file. A protein percentage alone does not. The product hub carries the catalogue specification; the COA page shows where each figure sits on the certificate; the grades page compares the three casein forms; the calcium versus micellar page covers the label consequences; the sodium caseinate page gives the other salt; the micellar casein page gives the native-micelle alternative; the methods section explains the techniques, and the quality page describes release. ### 01 What the COA for corn zein actually contains URL: https://nutrition.rainwoodbio.com/products/protein-collagen/corn-zein/coa/ Reviewed: 2026-11-20 A corn zein certificate reports the protein figure with its nitrogen factor and basis, the fat and ash ceilings that separate food-grade zein from corn gluten meal, the moisture, the protein-profile identification and the contaminant and microbiology panels. Each line needs a method, a release limit and a measured result. The limits below are the catalog specification; the batch COA is the document that confirms a particular pack. In one lineThe protein figure on a zein certificate is a nitrogen calculation on a stated basis, and the fat, ash and moisture beside it decide whether the powder is the grade that was ordered. ## The certificate as a test report A certificate is useful when a reviewer can reconstruct the release decision from the page: what was measured, which method produced the number, and which limit the lot was released against. Zein is defined by a protein fraction and by what is not there — fat, ash, fibre and moisture — so a single protein percentage leaves the other axes open. Release parameters for corn zein | Parameter | Method | Release limit | Appearance | Visual | Off-white to cream powder | Identification | Protein profile | Conforms to the reference | Protein | Kjeldahl nitrogen, N × 6.25, dry basis | ≥90.0% | Fat | Solvent extraction | ≤2.0% | Ash | Gravimetric | ≤1.0% | Moisture | Loss on drying | ≤8.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh ## Dry basis, the nitrogen factor and the mass balance The catalog protein limit is ≥90.0% on the dry basis, calculated from Kjeldahl nitrogen multiplied by 6.25. The factor is a convention: it assumes 16% nitrogen in the protein, and it belongs on the certificate. A result without the factor cannot be reproduced. The basis is the second convention. A result on the dry basis is the protein divided by the dry matter. A powder at 92.0% dry-basis protein and 6.0% moisture carries 92.0 × 0.94 = 86.5% protein as received. The same powder can be reported as 92.0% or 86.5% depending on the column heading. Neither is wrong; mixing them is. The mass balance is the third check. Convert the protein to the as-is basis before adding fat, ash and moisture: 86.5% protein + 2.0% fat + 1.0% ash + 6.0% moisture = 95.5%, leaving about 4.5% for carbohydrate and other matter. If the as-is figures add up to more than 100%, one of the lines has been reported on the wrong basis. That is the most common arithmetic error on a zein certificate. The FCC monograph for zein sets protein at 88.0–96.0% on the dry basis, fat at ≤2.0% and loss on drying at ≤8.0%. The catalog is tighter on protein (≥90.0%) and adds ash ≤1.0%. A lot can meet the monograph and miss the catalog, so the specification revision belongs beside the certificate. ## Release limit versus batch result Two columns are often conflated: the limit the lot must meet, and the value the laboratory found. The first is the specification; the second is the evidence. A result column that repeats the limit has told the reader nothing about the lot. The limit and the measured value are different columns | Parameter | Release limit | Result column | Protein | ≥90.0% dry basis (N × 6.25) | A measured percentage, with the factor and the basis | Fat | ≤2.0% | A measured percentage and the extraction method | Ash | ≤1.0% | A measured percentage | Moisture | ≤8.0% | A measured percentage | Heavy metals | Per element | A figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot “Passes specification” is a conclusion the reader should be able to reach from the numbers. For microbiology the evidence is a count plus an absence statement; for heavy metals it is a figure per element, not a total that hides the element that matters. “Protein profile conforms” is only useful when the certificate names the reference pattern or the gel image; otherwise the line is an opinion. Ask for the profile when the source is new. ## What moves between lots Four process steps move the numbers. The corn source sets the protein and the colour. The extraction with alkaline aqueous isopropyl alcohol sets the fat and the ash: a longer or hotter extraction can raise the protein and shift the colour, while a carry-over of sodium hydroxide raises the ash. Precipitation and drying set the moisture and the solvent residue. Milling sets the mesh and the dust. Fat is the line that separates zein from corn gluten meal. A zein grade at ≤2.0% fat is a different material from a gluten meal at several times that figure. The protein figures can look similar while the fat, fibre and colour are not. That is why the fat ceiling belongs in the first table, not in a footnote. Colour is a weak signal: a shade inside the off-white to cream range is not a failure, and the batch record is more useful than a photograph. Across lots, look at direction: protein drifting down, fat or ash climbing, moisture rising with the season, or a solvent result approaching the agreed limit. The lot code should match the pouch, the drum and the retained sample. ## When to order an outside test Order an independent test for a new source, a regulated market, a film claim the certificate does not support, or a disputed lot. Target the decision rather than repeat the whole certificate. The core panel is Kjeldahl protein with the factor and basis, fat, ash, moisture, protein profile by SDS-PAGE or the agreed method, amino acid analysis, ICP-MS for the heavy metals, and microbiology. Two zein-specific checks are worth adding: solubility in aqueous ethanol, where the powder is insoluble in water and soluble in the alcohol, and a mycotoxin panel, because corn can carry aflatoxin and fumonisin. If the specification carries a residual-solvent limit, test for the solvent named in the process; the route described in 21 CFR 184.1984 uses isopropanol. A “not detected” line without a detection limit is evidence about the method, not about the sample. Ask for the limit with the result. Keep the tested sample and the lot record; a referee test needs both. ## What to compare between suppliers Put six lines side by side: CAS number and source fraction; protein result with the factor and basis; fat, ash and moisture; protein profile and solubility; contaminants and microbiology; pack and lot code. Two certificates that agree on protein but differ on fat or basis are not describing the same powder. The second layer is traceability: who manufactured the lot, which corn fraction and solvent were used, and which drying and milling steps were applied. The catalog values sit on the corn zein product page. The identity page covers the tests that separate zein from corn gluten meal and peptides; the grades page covers mesh and granulation; the methods library explains the panels; the quality page describes release. ### 02 Corn zein grades: protein, fat, mesh and the film URL: https://nutrition.rainwoodbio.com/products/protein-collagen/corn-zein/grades/ Reviewed: 2026-11-20 The catalog grade is one powder: ≥90.0% protein on the dry basis, fat ≤2.0%, ash ≤1.0%, moisture ≤8.0%, milled to 80 mesh, insoluble in water and soluble in aqueous alcohol. The grade questions that remain are granulation, mesh, the protein-to-fat balance and whether the material is zein at all. Corn protein peptides are a separate product, not a coarser or finer zein. In one lineA zein grade is a protein figure with a basis, a fat ceiling, a mesh and a granulation, and each one changes how the powder films, flows or disperses. ## Why a zein grade is a specification “Corn zein” describes a protein family, not a single powder. Two suppliers can use the name for material from different corn fractions, dried on different lines and milled to different meshes. The protein figure can agree while the fat, the colour and the film behaviour do not. That is why the grade has to be a set of numbers. The catalog grade fixes five lines: protein ≥90.0% on the dry basis by Kjeldahl with N × 6.25, fat ≤2.0%, ash ≤1.0%, moisture ≤8.0% and ≥95% through 80 mesh. A change to any one of them is a new specification, not a packing choice. The source matters too: zein is the prolamine fraction, and a corn protein peptide is a hydrolysate of a different material. Zein is not a nutritional protein in the way a whey or soy isolate is: it is low in lysine and tryptophan, and its value is functional. Choose the grade for the function, not the protein percentage alone. ## The catalog grade and the variants that need a new specification Corn zein forms and what changes | Form | What changes | Why a buyer asks | 80 mesh powder | The catalog grade; no change | Capsules, tablets and powder blends | Granulated, on request | Larger particles, less dust, better flow | Blending and capsule feeding | Different mesh | Sieving, dust, wetting and film levelling | A coating line or a suspension needs another particle size | Tighter protein or fat limit | A different extraction target and yield | A film or a label needs a narrower window | Corn protein peptides | A hydrolysate; water-soluble, not a zein form | A clear drink or a soluble powder blend The third row is a milling change: the chemistry stays the same, while the sieve result, the dust and the wetting change. The fourth row is a process change: a higher protein floor or a lower fat ceiling comes from the extraction and the wash, not from a sieve. The fifth row is a different product. Granulation is a separate specification even when the chemistry is identical. ## Solubility, film, colour and flow Zein is insoluble in water and soluble in aqueous ethanol or aqueous isopropanol. That property explains most of the grade choice: a film is cast from an alcohol solution, a coating is applied from an alcohol system, and a powder blend that meets water will not dissolve. The film is the reason the material is bought. Zein films are hydrophobic, grease-resistant and a good oxygen barrier. They are also brittle without a plasticiser, so glycerol or propylene glycol is added; the plasticiser level changes the film more than the mesh does. A film grade should be qualified on the film, not only on the powder certificate. An 80 mesh powder passes about 177 µm. At that size it flows reasonably but dusts when poured, and dust is material that can segregate in a blend or settle on a coating line. Granulation reduces the dust and improves flow; the trade-off is a slower wetting step and a different sieve result. The powder is hygroscopic, and a fine grade takes up moisture faster than a granulated one. The catalog appearance is off-white to cream. The colour moves with the corn source, the extraction and the drying step, and a shade inside the range is not a grade failure. Colour and odour still matter in a capsule or a plain powder blend, where no flavour system covers them. ## What the grade means in a capsule, tablet or coating A capsule takes the 80 mesh powder directly. The fill weight is set by the bulk density and the target zein amount, and the capsule shell needs a dry room because the powder is hygroscopic. A granulated grade can improve flow, but it changes the fill weight for the same volume, so the label dose has to be recalculated. A tablet coating is a different calculation. The zein is applied as a film from an alcohol or aqueous-alcohol system, and the add-on is a small percentage of the tablet weight. The grade question is the film's adhesion, gloss and barrier. A coating trial should measure the add-on, the film appearance and the disintegration time, because a hydrophobic film can slow the latter. A film on confectionery or nuts is a surface-finishing application, and the add-on is chosen for gloss, grease resistance and moisture transfer. A powder blend takes the grade that matches the other ingredients in particle size, so the blend does not segregate. A stick pack is the wrong format for zein unless the powder is dispersed in an alcohol-containing system or used as a coating rather than a drink ingredient. Zein is low in lysine and tryptophan, so it is not a complete protein. A label that presents it as a protein source is making a claim the amino acid profile does not support; the function is the film, and the label should say so. ## What to write into the specification - “Corn zein, CAS 9010-66-6, source Zea mays; state the corn fraction and the extraction route.” - “Protein ≥90.0% by Kjeldahl, N × 6.25, dry basis; state the factor and the basis.” - “Fat ≤2.0%; ash ≤1.0%; moisture ≤8.0%; appearance off-white to cream.” - “Identification by protein profile; state the reference pattern or method.” - “Particle size ≥95% through 80 mesh; granulated on request as a separate line.” - “Solubility: insoluble in water, soluble in aqueous alcohol; name the test solvent.” - “Residual solvent, heavy metals, microbiology and allergen statement as agreed for the destination.” A specification that lists only “corn zein 90%” has left the basis, the fat, the mesh and the solvent open. The product hub carries the catalog values; the COA page shows how each line is reported; the zein versus corn peptide comparison covers the material choice; the methods library explains the analytical options; the quality page describes the release file. ## When a different grade is the wrong purchase A granulated grade is the wrong choice when the process needs a fine powder to suspend or to coat evenly. A finer mesh is the wrong choice when dust and flow are the problem. A tighter protein limit is the wrong upgrade when the fat rises with it and the film loses its barrier. The clearest wrong purchase is a different material under the same name. Corn gluten meal carries more fat and fibre and does not film in the same way; corn protein peptides are water-soluble and are not a zein. Neither becomes zein because the certificate says “corn protein”. ### 02.1 Corn zein vs corn protein peptides: solubility, function and the label URL: https://nutrition.rainwoodbio.com/products/protein-collagen/corn-zein/grades/corn-zein-vs-corn-protein-peptides/ Reviewed: 2026-11-20 Both are corn proteins, but they are different materials. Zein is the intact prolamine fraction, CAS 9010-66-6, insoluble in water and soluble in aqueous alcohol; it is bought for films, coatings and barriers. Corn protein peptides are a hydrolysate, specified here at ≥80.0% protein and ≥70.0% peptide, soluble in water and bought for capsules, blends and drinks. The switch changes the solubility, the function and the label name. In one lineZein is the water-insoluble, film-forming prolamine; corn protein peptides are the water-soluble hydrolysate, and the two cannot be swapped at the weigh-up or on the label. ## Two materials, one source Zein is the alcohol-soluble storage protein of corn, separated from corn gluten meal and purified as a powder. Corn protein peptides are made by hydrolysing corn protein with food-grade enzymes, then inactivating and drying the hydrolysate. The processes produce different materials: one is an intact protein with a film-forming structure, the other a mixture of short chains, free amino acids, ash and moisture. Corn zein and corn protein peptides compared | Property | Corn zein | Corn protein peptides | Material | Intact prolamine fraction | Enzymatic hydrolysate | CAS number | 9010-66-6 | Not a single CAS; the product is defined by its specification | Protein | ≥90.0% by Kjeldahl, N × 6.25, dry basis | ≥80.0% by Kjeldahl | Peptide content | Not a peptide specification | ≥70.0% by HPLC | Solubility | Insoluble in water; soluble in aqueous alcohol | Soluble in water | Function | Film, coating, barrier, binder | Soluble protein and peptide for capsules, blends and drinks | Appearance | Off-white to cream powder | Off-white to light yellow powder | Label name | Corn zein | Corn protein peptides or hydrolysed corn protein The protein rows are not like-for-like: zein has a higher floor on the dry basis, while the peptide adds a peptide fraction. Comparing the two on protein alone misses the property that decides the use: one dissolves in water, the other does not. ## Solubility is the first difference Zein is insoluble in water. It dissolves in aqueous ethanol or aqueous isopropanol, and that solution is the basis of every film and coating application. A formulator who adds zein to water gets a dispersion that settles; a formulator who adds it to an alcohol-water system gets a film-forming solution. The solvent choice, the ratio and the temperature are part of the process, and the residual solvent is part of the specification. Corn protein peptides dissolve in water and give a clear to slightly turbid solution. That is why they fit a stick pack, a fortified water or a capsule fill that must disperse quickly. The peptide is also easier to handle in a plant that has no solvent recovery, because the process is aqueous. The difference has a label consequence: a “corn protein” in a clear drink has to be the peptide, because a zein would need an alcohol-containing base. ## Film former against soluble protein Zein's commercial value is its film. The protein is hydrophobic, so a cast film resists grease and moisture, and it is a good oxygen barrier. It is used as a surface-finishing agent, a coating on confectionery and nuts, a tablet film and a binder. The film is brittle without a plasticiser, and the plasticiser level, the solvent and the drying profile decide its performance. Corn protein peptides are bought for solubility and for the peptide fraction, not for a film. They go into capsules, powder blends and drinks where the material has to dissolve or disperse and where the protein or peptide figure is part of the label. The peptide is not a complete protein either, so a blend with another protein is usually needed if the amino acid profile matters. The difference is not a quality ranking: each is the right material for a different job, and a specification for one does not describe the other. ## How to tell them apart on paper and in the lab The first check is the specification itself: a zein specification has a dry-basis protein floor, a fat ceiling, a moisture limit and a solubility line that says insoluble in water. A peptide specification has a protein figure and a peptide figure with an HPLC window. The second check is solubility. A small sample stirred in water and in 70% aqueous ethanol separates the two materials quickly: zein disperses but does not dissolve in water and clears in the alcohol; the peptide dissolves in water. The test is a screening check, not a release assay. The third check is the protein profile. Zein shows a characteristic pattern of prolamine bands, and the amino acid profile is high in glutamic acid, proline, leucine and alanine and low in lysine and tryptophan. A peptide has a different profile and a peptide distribution by HPLC. Fat and ash help as well: a zein grade is low in fat, while a corn gluten meal or a poorly purified peptide can carry more. ## What the label has to say The ingredient name follows the material. “Corn zein” is the name for the prolamine; “corn protein peptides” or “hydrolysed corn protein” is the name for the hydrolysate. “Corn protein” alone is ambiguous. Corn is not on the EU Annex II allergen list or the US major-allergen list, so neither material carries the soy or wheat allergen declaration. The source still has to be named in the ingredient list, and cross-contact with soy or wheat is a separate control. A “gluten-free” claim needs its own check: corn is not one of the cereals named in the Codex gluten-free standard, but the finished product and the test method still decide the claim. Neither material supports a disease claim. A protein claim is calculated on the finished product, and zein's amino acid profile makes a protein-source claim difficult to support on its own. The brand's reviewer decides the wording; the certificate supports the material, not the claim. ## When each one fits, and what changes on a switch Choose zein when the job is a film, a coating, a barrier or a binder, and when an alcohol process is available. Choose corn protein peptides when the job is a water-soluble powder for a capsule, a blend or a drink. If the formula needs both a film and a soluble protein, they are two ingredients, not one at a different dose. A switch is a new specification, not a substitution at the weigh-up. It changes the solubility, the process, the protein basis, the allergen statement and the label name. Run the new material through the same identity, stability and label review as a new supplier, and keep the two certificates apart. The corn zein hub carries the catalog values; the corn protein peptides hub carries the hydrolysate specification; the zein grades page covers mesh and granulation; the zein identity page covers the source tests; the methods library explains the analytical options; the quality page describes the release file. ### 03 Corn zein stability: moisture, heat and the film URL: https://nutrition.rainwoodbio.com/products/protein-collagen/corn-zein/stability/ Reviewed: 2026-11-20 The zein powder is hygroscopic and should stay sealed, dry and cool. The film is plasticiser-dependent and moisture-sensitive, and a zein solution in aqueous alcohol is a process stream rather than a storage format. Shelf life belongs to the pack and to the condition the material is held in; the certificate alone does not establish it. In one lineZein is a dry powder that picks up moisture and a film whose flexibility depends on plasticiser, so the pack and the storage condition decide whether it stays free-flowing and colour-stable. ## The powder: moisture, caking and colour The catalog moisture limit is ≤8.0%. That figure governs release testing; it is not an allowance for the open pack. Break the seal on the foil pouch and the powder starts to equilibrate with the room: water collects on the particle surfaces, bridges form between particles, and caking can appear while the assay remains within specification. An 80 mesh powder exposes more surface than a granulated grade, so it gains moisture faster. Residual fat is the second storage variable. The catalog allows ≤2.0% fat, and a small amount of lipid at the surface can oxidise over time. The first sign is usually an odour or a colour shift rather than a change in the protein figure. A nitrogen-flushed pack and a low headspace slow the change; they do not stop it once the pack is open. Light is the third variable. Zein is less photolabile than a pigment, yet a clear jar left on a bench still exposes the surface, and the powder can yellow there. Leave the material in the foil pouch it arrived in, or decant it into an opaque, close-fitting container. Heat quickens all three changes, and a warm loading bay is not a store. ## The solution: aqueous alcohol, not water Zein does not dissolve in water. It dissolves in aqueous ethanol or aqueous isopropanol, and the solution is the intermediate for a film or a coating. In solution, the solvent ratio, the concentration, the temperature and the time decide the viscosity. A solution that is left to stand can thicken or gel, and a loss of solvent changes the solids content and the film thickness. The solution is also a microbial and fire-safety question, not only a chemical one. An alcohol-rich stream needs the solvent handling and the ventilation that the solvent requires, and a diluted stream is more susceptible to microbial growth. The hold time should be validated for the actual solvent ratio and temperature, not borrowed from a water-based protein. For a film, the drying step is part of the stability question. A film that is dried too fast can be brittle or hazy; a film that retains solvent can smell and can fail a residual-solvent check. The film should be qualified on appearance, flexibility, barrier and residual solvent, and the qualification belongs to the film, not to the powder certificate. ## What drives change during storage Factors that move corn zein during storage | Factor | What it does | Control | Moisture | Caking, lower as-is protein, microbial risk | Sealed pouch or lined drum; dry store | Heat | Faster moisture movement; colour and odour change | Cool store; controlled drying | Light | Surface yellowing | Opaque or foil pack; dark store | Oxygen | Oxidation of residual fat; odour change | Low headspace; nitrogen where specified | Solvent | Viscosity and film thickness change as the alcohol evaporates | Closed vessel; validated hold time | Reducing sugars | Browning with amino groups under heat and moisture | Specify the carbohydrate profile of the blend | Compression | Film cracking or tablet-coat defects | Plasticiser level; process trial No factor acts alone. A warm, humid store is worse than either condition separately, and a clear solution on a bench combines light, oxygen, solvent loss and time. The useful question is not whether zein is stable in the abstract, but whether this pack at this condition holds the protein, the fat, the moisture and the film performance for the claimed period. ## A stability protocol for the ingredient A stability protocol fixes four things before any chamber is loaded: the pack, the condition, the time points and the tests. Warehouse storage runs at 25 °C and 60% relative humidity; a warm-climate arm sits at 30 °C and 65% relative humidity; an accelerated arm at 40 °C and 75% relative humidity puts stress on the pack. Add a light-exposure arm for the colour change that a dark chamber will not show. Test protein with the factor and basis, fat, moisture, ash, appearance, odour, solubility in the named aqueous alcohol and microbiology at each point. If the material is sold for a film, add a film cast from the stored powder and test its appearance, flexibility and barrier. The film result is the one that matters for the application, and it can fail while the powder certificate still passes. The stability summary must match the pack on the purchase order. Headspace, opening history and surface-to-volume ratio differ between a 1 kg pouch and a 25 kg drum, so data from one pack does not answer for the other. ## When the powder becomes a formula A capsule or a tablet keeps water activity low, but the shell and the excipients can still pass moisture to the fill. Check the fill's moisture and appearance at release and after storage, and check the capsule shell for brittleness. A tablet coating is a film application: the coating formulation, the plasticiser and the drying conditions decide the result, and a hydrophobic zein film can slow disintegration. A powder blend is more exposed. A reducing sugar in the same blend can brown with the protein under heat and moisture, and a fine zein can segregate from a coarser ingredient. Match the particle sizes and specify the carbohydrate profile. A film on confectionery or nuts is a surface application, and the storage test should follow the coated product, not the powder alone. An overage belongs to the label and to the stability plan; it cannot compensate for a pack with a poor moisture barrier, and it cannot put plasticiser back into a film that has lost it. ## How the shelf life is set Corn zein has no single shelf-life figure that applies across packs. Each pack carries its own retest period, and that period rests on the stability file generated for the pack. A figure that does not name the pack, the storage condition and the test panel is a claim rather than a shelf life. When the retest period ends, re-test the retained sample before granting an extension. An extension rests on data from that sample, not on the age of the lot, and a bulk figure does not follow the material into a repacked container. Pack options sit on the product hub; release testing is set out on the COA page; pack and lead time are on the MOQ page; the analytical panels are explained in the methods library; and the release workflow is described on the quality page. ### 04 Corn zein: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/protein-collagen/corn-zein/moq/ Reviewed: 2026-11-20 The MOQ for corn zein is 1 kg, supplied as a 1 kg foil pouch; the standard bulk pack is a 25 kg fiber drum. Standard powder is quoted at 1–7 days from order confirmation. A firm quotation needs the material and CAS number, the protein basis and fat ceiling, the pack, the destination and Incoterm, the documents and the intended use. In one lineOne kilogram is the order unit because it is the smallest pack that can be sampled, tested and traced as a single lot. ## Why the minimum is 1 kg A 1 kg pack can cover a bench trial, a retained sample and an independent identity test. It is also small enough to ship as a parcel, which matters when a formulator needs material before the production plan is fixed. The pack carries a lot code and a certificate, so the trial is tied to a traceable unit rather than to a scoop from a drum. Below 1 kg, the material is usually split from a larger lot and repacked. That is a repack: it adds handling, loses the original pack identity and makes the lot chain harder to follow, without changing the chemistry. The 25 kg drum lowers the handling per kilogram and ties up more inventory for longer. The minimum is a pack decision, not a volume incentive. Zein is hygroscopic, so every opening is an exposure. A 1 kg pack that is opened for a trial and then closed is a smaller exposure than a 25 kg drum opened for the same trial. That is one reason the small pack is the qualification unit and the drum is the production unit. ## Packs and formats Standard corn zein packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Particle profile changes; separate specification The catalog powder is milled to 80 mesh, with ≥95% passing. Granulation is a separate specification: it changes the particle-size line and the flow, and it should be quoted as a change, not slipped into the same pack code. The foil pouch is the moisture barrier for a 1 kg order; the drum relies on its inner liner, so the liner has to be closed after sampling. Neither pack makes the powder non-hygroscopic. ## Lead time and dispatch Standard powder is quoted at 1–7 days from confirmation. Picking, document preparation and dispatch sit inside that window; transit, customs clearance and the customer's own quality release do not. A granulated or otherwise custom pack needs its own date, and the quotation should state it separately. Ask for the dispatch date, not only the range. The Incoterm decides who books freight and who clears entry, and the documents should travel with the same lot as the powder. A certificate that arrives after the drum has been sampled is a certificate for a lot the customer cannot identify. ## What a quotation needs Six details make a quotation comparable: - The material and its identity. Corn zein, CAS 9010-66-6, with the corn fraction and extraction route named. - The specification. Protein factor and basis, fat ceiling, ash, moisture and mesh. - The pack. 1 kg pouch, 25 kg drum or a granulated variant. - The destination and Incoterm. The delivery point and the trade term. - The document set. COA, specification, SDS, allergen statement, GMO statement and any residual-solvent or mycotoxin statement. - The intended use and market. Coating, capsule, film or another use, and where the finished product will be sold. Without the protein basis, the fat ceiling and the market, a quotation is only a weight and a pack. Commercial terms are stated on the quotation, not on this page. ## Qualifying a sample The 1 kg pouch is the qualification unit. Test identity, protein with the factor and basis, fat, moisture and microbiology, and keep part of the same pack as the retained sample. If the material is bought for a film, cast a film from the sample and test its appearance and flexibility. The lot code should appear on the sample, the COA and the quotation; a sample without a lot code cannot support a specification decision. A bench-scale split is a repack, not the catalog pack. Ask for it explicitly and record it. The trial lot and the production drum are not guaranteed to be the same lot, even when the specification is identical. ## Terms to agree before ordering The quotation carries the commercial terms; the quality agreement carries the rest. Write down the specification revision, one COA per lot, the retained sample, the retest period and the route for approving a change to the source, the solvent or the pack. Those five lines prevent most disputes. If a lot fails, use the retained sample and a joint re-test against the named method. A photograph is not evidence. Agree the referee laboratory and who pays for it before the dispute, not after. The product hub holds the catalog data; the COA page lists the release tests; the compliance page covers market files; the MOQ glossary entry defines the term; the quality page describes release. ### 05 The regulatory file for corn zein URL: https://nutrition.rainwoodbio.com/products/protein-collagen/corn-zein/compliance/ Reviewed: 2026-11-20 Corn zein is a corn-derived prolamine with a long history as a coating and film former. In the United States it is affirmed GRAS as a surface-finishing agent at 21 CFR 184.1984; in the European Union the route depends on whether the use is an ingredient or a technical additive, and the buyer's regulatory team confirms it. The file needs the source, the GMO and allergen statements, the mycotoxin and residual-solvent positions, the label and the lot data. In one lineThe specification describes the zein; the regulatory file shows the route, the source controls and the label for the destination. ## What the file has to answer The file has four jobs. It identifies the material and the specification revision; it ties the release to a lot and a certificate; it sets out the route, the limits and the label for the destination; and it records what happens when the corn source, the extraction solvent or the pack changes. The certificate, the technical data sheet and the safety data sheet each answer part of that, and none answers the route. Corn zein is not a mineral with a positive list of permitted forms. It is a food protein with a functional use, and the route depends on how the finished product positions it. That makes the file use-specific: the same powder can be a surface-finishing agent in one product and an ingredient in another. ## European Union The first EU question is novel food. Regulation (EU) 2015/2283 covers food that was not used for human consumption to a significant degree in the Union before 15 May 1997. Zein has a long history in coatings, but the buyer's team still checks the novel-food catalogue and the evidence for the exact material and use. No status is asserted here. The second question is the additive classification. Regulation (EC) No 1333/2008 governs food additives, and zein is not one of the E-numbered waxes or glazing agents in Annex II as of this review. If the intended use depends on a technical function such as glazing or film-forming, the buyer's team has to settle whether that use is an additive use that needs authorisation or an ingredient use that does not. The label follows that decision. The rest of the file draws on Regulation (EU) No 1169/2011 for food information, Regulation (EC) No 1924/2006 for claims, Regulation (EU) 2023/915 for contaminants and Regulation (EC) No 1829/2003 for GM food. Great Britain has its own register and labelling rules, and Northern Ireland follows the EU framework. Check the current text; these instruments are amended. ## United States In the US, zein is affirmed as GRAS for use as a surface-finishing agent, with no limitation other than current good manufacturing practice, at 21 CFR 184.1984. The regulation also describes the commercial route: extraction from corn gluten with alkaline aqueous isopropyl alcohol containing sodium hydroxide, followed by cooling to precipitate the zein. That description names the solvent the residual-solvent statement should cover. A supplement use is a separate positioning question. A dietary ingredient is assessed under the Federal Food, Drug, and Cosmetic Act as amended by DSHEA, and 21 CFR 111 covers cGMP while 21 CFR 101 covers labelling. Corn is not a major food allergen under FALCPA, so the allergen declaration does not arise from the source; the ingredient still has to be named, and cross-contact with a major allergen is a separate control. ## Contaminants and limits The contaminant calculation belongs to the finished product, not to the drum. The destination text and the daily dose set the limit; the table below is the list of questions to ask, not a set of universal numbers. Contaminant questions for a corn zein file | Parameter | Why it belongs in a corn file | What the file should show | Lead (Pb) | A general contaminant of plant proteins | Lot result, method, limit and dose calculation | Cadmium (Cd) | A general contaminant of plant proteins | Lot result and any category exception | Mercury (Hg) | A general contaminant | Lot result and method | Arsenic (As) | A market or customer limit | The agreed limit and method | Mycotoxins | Corn can carry aflatoxin, fumonisin, deoxynivalenol and zearalenone | A risk-based panel agreed for the lot and destination | Residual solvent | The extraction uses isopropanol in the 21 CFR route | The solvent, the limit, the method and the lot result | Microbiology | Powder handling and water activity | Counts and absence tests Mycotoxins are the corn-specific item that a generic certificate may not cover. The catalog specification here does not list them, so the buyer should ask whether the source monitors them and whether the lot can be tested against the destination limits. ## Claims and the label No disease claim is made for this ingredient. In the EU, a health claim must appear in Regulation (EU) No 432/2012, and a protein nutrition claim is calculated on the finished product, not on the raw powder. Zein is low in lysine and tryptophan, so a claim that presents it as a protein source is difficult to support on the amino acid profile alone. The brand's reviewer decides the wording; the certificate does not approve a claim. In the US, a structure/function claim needs substantiation and the applicable notification, and the ingredient is named in the Supplement Facts panel if the product is a supplement. “Plant-based” and “corn-derived” are descriptions of the source, not authorised health claims. A “gluten-free” claim needs its own check: corn is not one of the cereals named in the Codex gluten-free standard, but the finished product and the test method still decide the claim. ## The document set - Specification with the revision number, the corn source, the protein factor and basis, the fat ceiling and the mesh. - Certificate of analysis for the lot, with methods, limits and measured results. - Technical data sheet and safety data sheet. - Allergen statement covering the corn source and the soy and wheat cross-contact controls. - GMO statement for the corn source, and any identity-preserved or non-GMO certificate the market requires. - Mycotoxin and residual-solvent statements, with the method and the limit. - Origin record, heavy-metal and microbiology results, and any customer-specific declaration. ## Checklist before the first order - The specification version, the corn source and the extraction route are named. - The novel-food or additive route is confirmed by the buyer's regulatory team for the destination and the use. - The GMO and allergen statements are on file and match the lot. - The mycotoxin and heavy-metal results are recalculated for the finished-product dose. - The residual-solvent statement names the solvent used and the limit applied. - The label, the nutrition panel and the claim wording have been reviewed for the market. - Change control covers the source, the solvent and the pack, and the quotation, specification and certificate refer to the same version. Catalog values are on the product hub; the lot certificate is explained on the COA page; the source evidence is on the identity page; the framework references are in the EU and US regulatory notes; the release file is described on the quality page. ### 06 How we prove a corn zein lot is zein URL: https://nutrition.rainwoodbio.com/products/protein-collagen/corn-zein/identity/ Reviewed: 2026-11-20 A corn zein lot is the named material when four measurements agree with the document: the protein figure is on the dry basis with N × 6.25, the protein profile shows the zein pattern, the powder is insoluble in water but soluble in aqueous alcohol, and the amino acid pattern is corn-like. The document must name the prolamine and CAS 9010-66-6, and the protein figure alone cannot separate zein from corn gluten meal or a corn peptide. In one lineIdentity is the agreement of four measurements: the nitrogen figure on its basis, the protein profile, the aqueous-alcohol solubility and the amino acid pattern. ## The identity layers A certificate can name the right material and still fail to prove it. The layers below are separate questions, and each needs its own evidence. A supplier who answers only the first has described the paperwork, not the powder. Layers of corn zein identity | Layer | Question | Test | What it proves | Document | Is the material named? | Name, CAS 9010-66-6, source | Paperwork only | Nitrogen | Is the protein figure real? | Kjeldahl with the factor and basis | Total nitrogen, not the fraction | Profile | Is the protein zein? | SDS-PAGE or the agreed profile | The prolamine pattern | Solubility | Is it the prolamine? | Water and aqueous alcohol | The characteristic solubility | Amino acids | Is the source corn? | Amino acid analysis | A source fingerprint | Mass balance | Is it diluted? | Protein, fat, ash and moisture together | Consistency of the numbers ## The nitrogen factor, the dry basis and the mass balance Protein is calculated from nitrogen: the Kjeldahl result multiplied by an agreed factor, 6.25 in the usual case. That factor is a ratio, and it belongs on the certificate. A result of 15.0% nitrogen becomes 93.75% protein at 6.25, but a different factor would give a different number from the same powder. The factor is a convention, not a measurement. The basis is the second ratio. Protein on the dry basis is the as-is protein divided by the dry matter. A powder at 92.0% dry-basis protein and 6.0% moisture carries 92.0 × 0.94 = 86.5% protein as received. The same powder can be reported as 92.0% or 86.5% depending on the column heading; mixing the two is the common error. The mass balance is the third check. Add the as-is protein to the fat, ash and moisture: 86.5% protein + 2.0% fat + 1.0% ash + 6.0% moisture = 95.5%, leaving about 4.5% for carbohydrate and other matter. A certificate that adds 92.0 + 2.0 + 1.0 + 6.0 = 101.0 has put the protein on the dry basis and the other lines on the as-is basis. The total is the tell. The amino acid pattern is the source ratio. Zein is high in glutamic acid, proline, leucine and alanine and low in lysine and tryptophan. Corn gluten meal shares the corn source but carries more fat and fibre; soy protein is much higher in lysine; wheat gluten has its own pattern and a gluten ELISA signal. Tryptophan needs its own hydrolysis method because acid hydrolysis destroys it, so a certificate that reports tryptophan from a standard acid hydrolysis has reported a number it cannot defend. ## X-ray diffraction: the solid-state check Zein is an amorphous protein, and its X-ray diffraction pattern is a broad halo rather than a set of sharp peaks. XRD is therefore not a routine release test for zein, and a “conforms” statement against an amorphous reference adds little on its own. It becomes useful when the question is whether the powder contains a crystalline carrier or a salt: a sharp pattern is a signal to ask what else is in the blend. If a supplier offers XRD as identity evidence, ask for the pattern, the reference and the detection limit. It does not measure the protein fraction, and it does not prove the corn source. It is a supporting solid-state check, not a substitute for the nitrogen, profile, solubility and amino acid data. ## What adulteration looks like Common corn zein substitutions and the signals | Adulterant | What it does | Signal | Test | Corn gluten meal | Raises yield; adds fat and fibre | Fat high; colour darker; protein lower | Fat, fibre, protein profile | Corn protein peptides | Adds water-soluble protein | Dissolves in water; peptide present | Solubility, peptide HPLC | Wheat gluten | Adds a similar prolamine | Gluten detected; profile differs | Gluten ELISA, SDS-PAGE | Soy protein | Raises protein and lysine | Lysine high for corn; soy detected | Amino acid profile, soy ELISA | Starch or maltodextrin | Dilutes the powder | Protein low; iodine or sugar signal | Mass balance, iodine test | Moisture | Lowers the as-is protein | Moisture high; dry-basis figure normal | Loss on drying The simplest substitutions are the ones that move the protein figure, because the protein figure is the number most buyers check first. The fat, the solubility and the amino acid pattern are the checks that make the substitution visible. Colour is the weakest signal: off-white to cream covers a wide range of powders, including blends. ## How to write the identity into the specification - “Corn zein, CAS 9010-66-6, source Zea mays; state the corn fraction and the extraction route.” - “Protein ≥90.0% by Kjeldahl, N × 6.25, dry basis; state the factor and the basis.” - “Fat ≤2.0%; ash ≤1.0%; moisture ≤8.0%; appearance off-white to cream.” - “Identification by protein profile; state the reference pattern or method.” - “Solubility: insoluble in water, soluble in aqueous alcohol; name the test solvent.” - “Amino acid profile on file, with lysine and tryptophan reported by a validated method.” - “No corn gluten meal, corn peptide or other protein above the agreed limit; allergen and GMO statements for the lot.” A specification built this way gives the laboratory something to test and the buyer something to compare. A single line that says “corn zein 90%” gives neither. The product hub carries the catalog values; the COA page shows where each figure sits on the certificate; the grades page covers mesh and granulation; the zein versus corn peptide comparison covers the material choice; the methods library explains the analytical options; the quality page describes the release file. ## Five questions for the supplier - Which corn fraction and extraction route produced this lot, and is the CAS number on the certificate? - What are the protein factor and basis, and what are the fat, ash and moisture results? - Can you provide the protein profile and the amino acid analysis, not only the protein percentage? - What is the solubility in water and in the named aqueous alcohol? - If the lot is disputed, will you accept a joint re-test on the retained sample? Five direct answers amount to an identity file. A single protein percentage does not. ### 01 What an 80% micellar casein COA contains URL: https://nutrition.rainwoodbio.com/products/protein-collagen/micellar-casein/coa/ Reviewed: 2026-11-20 A micellar casein certificate is short enough to read line by line. It should show the protein result with the Kjeldahl factor and the dry basis stated, the moisture that converts that result to the powder as weighed, the ash and lactose that describe the milk solids left beside the protein, and the usual contaminant and micro panels. A protein figure without its basis is the one error that survives every other check. In one lineProtein on a dry basis, ash, lactose and moisture describe four different things about the same powder, and a certificate that prints them without their methods and limits has not described the lot. ## What the sheet lists Two blocks do the work. The first covers composition and physical form: appearance, protein, moisture, fat, lactose, ash and the sieve pass. The second covers contaminants and microbiology. They are separated because a formulation team reads the first and a quality team signs the second, and because the tests come from different benches. Everything in the two tables is a catalog limit for the grade. A lot certificate repeats each limit and adds the value measured on that lot; the value, not the limit, is what the buyer is accepting. Micellar casein · composition and physical limits | Test | Method | Catalog limit | Appearance | Visual | Off-white to cream, free-flowing powder | Protein, dry basis | Kjeldahl, N × 6.38 | ≥80.0% | Moisture | Loss on drying | ≤6.0% | Fat | Solvent extraction | ≤2.0% | Lactose | HPLC | ≤1.0% | Ash | Gravimetric, furnace | ≤7.0% | Particle size | Sieve analysis | ≥95% through 80 mesh Micellar casein · contaminants and microbiology | Test | Method | Catalog limit | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Total plate count | Plate count | ≤1,000 cfu/g | Yeast and mould | Plate count | ≤100 cfu/g | E. coli | Enrichment | Absent | Salmonella | Enrichment | Absent ## The nitrogen factor and the dry basis Kjeldahl digests the sample and titrates the ammonia; the number it returns is nitrogen, not protein. Milk protein is taken to contain 15.7% nitrogen, so the dairy conversion is 6.38. The general food conversion of 6.25 assumes 16% and returns a smaller figure from the same titration: at 80% protein the gap is about 1.6 percentage points. Both factors can be defended; only one can be used for a given specification, and the certificate has to say which. The dry basis is the second multiplier. Moisture is measured separately and excluded, so 80.0% on a dry basis at 6.0% moisture is 75.2% of the powder in the bag. Use the dry-basis number to compare suppliers, and the as-is number to calculate a serving. Nitrogen can also arrive from something that is not protein. Micellar casein has little non-protein nitrogen of its own, but urea or melamine would raise the titration. The factor and the basis make the arithmetic transparent; they do not establish the source. The identity checks cover that question. ## Release limit, batch result and what “conforms” hides The limit is the acceptance boundary; the lot column is what the laboratory found. When a certificate prints the boundary twice, the reader learns nothing about the lot. Ask for a result column that carries a value and a method for every line, including the ones that passed comfortably. What a lot result column should carry | Test | Limit | Lot column | Protein | ≥80.0% dry basis | Result with factor and basis beside it | Moisture | ≤6.0% | Result and the drying method | Ash | ≤7.0% | Result and furnace temperature | Lactose | ≤1.0% | Result by HPLC | Heavy metals | Per element | Per-element figure in mg/kg | Micro panel | Counts; pathogens absent | Plate count plus absence statement Microbiology needs two kinds of entry: a count for the total plate, yeast and mould, and a statement of absence for the pathogens. Metals need one figure per element — a summed heavy-metals result cannot be checked against a lead limit. Ash is a single number by nature, but its meaning depends on the mineral panel behind it: the same 6% ash can be milk salts or a neutralising agent. ## What moves between batches Season and feed move the raw milk before the plant sees it. Protein, fat and lactose rise and fall through the year, and a membrane plant that targets a fixed retentate protein still passes the variation into ash and lactose. Two lots can sit inside the same specification and behave slightly differently in a mixer. The plant adds a second layer. Fouling changes what passes the membrane; the amount of diafiltration water sets how much lactose and soluble mineral leaves; dryer temperature sets moisture and colour; the mill sets the sieve result. These are process variables, and the certificate shows only their outcome. Colour deserves a comment because it is easy to over-read. The grade is off-white to cream, which covers a broad band. A darker powder may reflect a hotter dryer or a reaction between lactose and lysine, but it may also be normal variation. Compare it with the retained sample and the process record before drawing a conclusion; a drift over several lots is more informative than one dark drum. ## When to order an outside test Independent testing earns its cost at four moments: a new milk source, a first entry into a regulated market, a claim the supplier’s certificate cannot support, and a disputed result. The useful panel is targeted rather than a duplicate: protein with the factor stated, ash and the calcium/phosphorus pair by ICP-OES, lactose, moisture, the metal panel and the micro set. Two additions are worth considering on a new source. Melamine is two-thirds nitrogen by mass, so it inflates Kjeldahl while leaving the amino acid profile unchanged; a melamine and cyanuric acid screen closes that route. An amino acid profile plus SDS-PAGE shows whether the protein pattern is milk and whether the casein share is consistent with a micellar grade. The sample chain is as important as the method. A result is only useful if the laboratory received a sample that can be tied to the lot, and if the retained sample from the same lot is still available for a referee. Ask for the lot number on the report. ## What to compare between suppliers Six or seven lines will separate most suppliers: protein with factor and basis; ash with calcium and phosphorus; lactose; moisture; dispersion in your own equipment; the allergen statement; and the lot trace. Agreement on protein alone is weak evidence, because two powders can reach 80% with different amounts of milk solid beside it. Traceability completes the picture. The certificate should identify the manufacturing site, the membrane route and the dryer, and the same lot code should appear on the pouch, the drum, the certificate and the retained sample. The catalog range is on the product page; the analytical separation is on the identity page; the regulatory file is on the compliance page; the Kjeldahl method is in the methods library; release practice is on the quality page; the 90% grade is on the casein page. ### 02 80% or 90%, standard or instantized: choosing a micellar casein grade URL: https://nutrition.rainwoodbio.com/products/protein-collagen/micellar-casein/grades/ Reviewed: 2026-11-20 Micellar casein reaches the market at more than one protein level and in more than one physical form. The grade on this page is specified at 80% protein on a dry basis; the casein page carries a 90% grade, and the caseinate pages carry the salts. Protein per gram, ash and mineral load, dispersion and the label name all move with the choice. The standard powder passes 80 mesh, and an instantized option is available when wetting speed matters. In one lineThe grade decision is protein level and physical form before it is brand: 80% or 90%, standard or instantized, micellar or caseinate, and each choice moves the label and the mixer. ## Why the grades exist Casein is a family, not a single specification. Micellar grades come from skim milk that is passed across a membrane; the micelle and its calcium phosphate stay in the retentate, while whey protein, lactose and soluble salts leave with the permeate. Caseinates start from acid-precipitated curd that is neutralised with sodium or calcium hydroxide. The protein level within the micellar family depends on how much diafiltration the retentate receives: more water washes out more lactose and soluble mineral. Headline protein is therefore not enough to identify a grade. An 80% micellar powder, a 90% micellar powder and a 90% sodium caseinate can all be called casein by a careless purchase order, and they behave differently in water and carry different labels. ## The grades side by side Micellar casein, the 90% casein grade and sodium caseinate | Point | Micellar casein 80% | Casein grade 90% | Sodium caseinate | Protein, dry basis | ≥80.0% | ≥90.0% | ≥90.0% | Ash | ≤7.0% | ≤2.0% | ≤4.0% | Mineral marker | Milk calcium phosphate retained | Ash ≤2.0%; lower mineral load | Sodium 1.0–1.5% | Fat | ≤2.0% | ≤1.5% | ≤1.5% | Moisture | ≤6.0% | ≤10.0% | ≤6.0% | In water | Disperses; opaque; thickens | Disperses; opaque | Freely soluble; slightly turbid | Heat step | Thickens; trial the process | Thickens; trial the process | Less thickening on heating; still trial | Label name | Micellar casein; milk declared | Casein; milk declared | Sodium caseinate; milk declared The ash figure is a mineral load, not a family label. The 80% grade keeps more of the milk’s calcium phosphate and is allowed up to 7.0% ash; a caseinate carries the hydroxide cation; the 90% grade is held to a tighter ceiling. Read ash together with protein and with the sodium or calcium result before treating it as a form check. ## Particle size, density and wetting The catalog powder is a spray-dried 80 mesh cut: at least 95% passes a sieve of about 180 µm. Sieving is the last step in the plant and the first thing a filling line notices. It sets flow, dust and the mass that fills a scoop or a sachet, but it does not predict how the powder behaves once water is added. An instantized grade is built from the same fines, agglomerated into porous clusters. It sinks and wets faster and produces less dust. Bulk density falls, so a volumetric fill will overfill unless the target weight is reset. Colour is not a grade marker; both forms are off-white to cream. ## Load, viscosity and the dosage form In a drink, viscosity usually arrives before any other limit. As the micelle hydrates, the dispersion thickens; the effect increases with protein concentration, mixing time and shear. Ten grams of protein in a stick pack and 25 g in a ready-to-drink are different mixing problems even with identical powder, and a bench blender is not a production tank. Bars are governed by water activity and texture through shelf life, not by dispersion. Capsules and tablets need flow and density at 80 mesh, and the dose is capped by fill weight. Whatever the format, trial the grade in the finished matrix at the intended load before the specification is signed. The stability page covers what happens to the powder and the matrix over time. ## What to write into the specification - Form and process: micellar casein separated from skim milk by microfiltration, not a caseinate. - Protein ≥80.0% on a dry basis, Kjeldahl with N × 6.38; factor and basis printed. - Moisture ≤6.0%, fat ≤2.0%, lactose ≤1.0%, ash ≤7.0%. - Physical: ≥95% through 80 mesh; instantized on request; bulk density stated. - Dispersion test: grams per 100 mL, water temperature, shear, time and sediment limit. - Allergen: milk declared on the specification and on the COA. - Contaminants, microbiology, pack, lot code and manufacturing site as on the COA page. ## When another grade is the better choice The 90% grade earns its place when protein per gram is the constraint and the formula can live with a lower ash ceiling and a wider moisture window. A caseinate is the right starting point for a near-clear drink, a fast-dissolving mix or a process with a heat step. Acid casein fits neither role: at its isoelectric point it does not disperse, and it exists as an intermediate on the way to caseinate. A single grade across a product line usually costs less to manage than several. Each additional form brings its own specification, allergen statement, dispersion trial and label line. The compliance page follows the label consequences; the glossary entry explains the sieve convention. The product page holds the catalog range, and the casein page holds the 90% grade. ### 02.1 Micellar casein vs casein: solubility, processing and the label URL: https://nutrition.rainwoodbio.com/products/protein-collagen/micellar-casein/grades/micellar-casein-vs-casein/ Reviewed: 2026-11-20 Micellar casein is casein that has kept the micelle it had in milk: the skim milk is filtered rather than acidified, so the calcium phosphate and the casein proteins stay together and the powder disperses without dissolving. “Casein” on its own is a family name — on this site the casein page carries a 90% micellar grade, this product is the 80% grade, and the caseinates are separate salts. The two micellar grades differ in protein per gram, ash and mineral load, dispersion behaviour and the ingredient name the label can carry. In one lineFiltered, not precipitated: micellar casein keeps the micelle, disperses instead of dissolving, and carries more milk minerals than the 90% grade — the label has to name the form, not just “casein”. ## Two micellar grades, and the family name around them Casein is about 80% of the protein in cow’s milk and the fraction that curdles at pH 4.6. As a purchase order, “casein” can mean three different materials: micellar casein, acid casein and a caseinate. Micellar casein is made by microfiltration; acid casein is precipitated by lowering the pH; a caseinate is acid casein redissolved with sodium or calcium hydroxide. The three share a protein, not a powder. This site lists two micellar grades. The 80% grade on this page keeps more of the milk’s mineral load and is specified with ash ≤7.0%; the 90% grade on the casein page carries ash ≤2.0%. Both are micellar casein, and neither is a caseinate. A buyer comparing them is comparing protein per gram and mineral load, not two chemical forms. ## Filtration, precipitation and what the membrane leaves behind The micellar route starts with skim milk and passes it across a membrane with pores around 0.1 µm. Casein micelles are between roughly 50 and 500 nm, so they are retained; whey proteins, lactose and soluble salts pass with the permeate. Diafiltration — adding water and repeating the concentration — washes more lactose and soluble mineral out and lifts the protein on a dry basis. The retentate is then spray-dried. The acid route is different. Skim milk is acidified to pH 4.6, the casein curd is separated, washed and dried, and the result is acid casein: a material that does not disperse in water at its isoelectric point. A caseinate is made by redissolving that curd with sodium or calcium hydroxide and drying the solution. The salt dissolves because the protein has been taken apart and neutralised, not because the micelle survived. The two micellar grades sit at different points on the same membrane route. The 90% grade has a lower ash ceiling and a higher moisture ceiling; the 80% grade keeps more of the milk minerals and is dried to ≤6.0% moisture. The two are separate specifications rather than one powder at two dilutions. Confirm the membrane and drying route on the certificate rather than inferring it from the protein number. ## Dispersion is not solution “Soluble” does not apply to micellar casein. In water the micelle hydrates and swells, the dispersion turns opaque and the viscosity rises; left standing, it settles. That behaviour gives body and mouthfeel, and it is why the powder needs shear and time rather than a brief stir. Heat and acid both change the picture. A heat step thickens the dispersion and can gel it, so the process needs a trial at the real solids, pH and holding time. Near pH 4.6 the micelle loses its charge and the protein precipitates; an acidic drink is not a simple base for this material. A sodium caseinate is freely soluble and gives a slightly turbid solution; a calcium caseinate disperses more readily than the micelle and carries its own calcium load. Acid casein does not disperse at all at its isoelectric point. Those differences are the practical reason the four names are not interchangeable in a mixer. ## The numbers that change with the grade Micellar casein 80% against the 90% casein grade | Property | Micellar casein 80% | Casein grade 90% | What it changes | Protein, dry basis | ≥80.0% | ≥90.0% | Protein per gram of powder | Ash | ≤7.0% | ≤2.0% | Mineral load in the formula | Fat | ≤2.0% | ≤1.5% | Energy and mouthfeel | Lactose | ≤1.0% | ≤1.0% | Browning and sugar declaration | Moisture | ≤6.0% | ≤10.0% | As-is protein and caking risk | Particle size | ≥95% through 80 mesh | ≥95% through 80 mesh | Flow, dust and fill weight | In water | Disperses; opaque; thickens | Disperses; opaque | Mixer, time and viscosity The protein line is on a dry basis in both grades, with N × 6.38. At 6.0% moisture the 80% figure is about 75.2% as weighed; the 90% grade at its 10.0% ceiling is about 81.0% as weighed. Comparing an as-is result from one with a dry-basis result from the other is the most common arithmetic error in a grade switch. ## What the label and the allergen file have to say The ingredient name follows the process. A micellar grade is declared as micellar casein or milk protein concentrate, depending on the market; a caseinate must be declared as sodium caseinate or calcium caseinate. A label that says “casein” for a caseinate has named the family, not the ingredient. Milk is a major allergen in the EU and the US, and every one of these materials is a milk protein. The declaration is required whichever grade is used, and the lactose ceiling on this grade — ≤1.0% — does not make the powder dairy-free or non-allergenic. The specification and the COA carry the allergen statement; the finished-product label must carry the milk declaration, and the compliance page covers the market wording. The protein declaration has its own basis problem. A label that declares the dry-basis protein per 100 g overstates what is in the powder as weighed. Use the as-is figure for the nutrition panel and keep the dry-basis figure for the specification. ## Choosing between them Choose the 80% micellar grade when the formula wants the milk minerals and the fuller body, and when the protein per gram can be lower. Choose the 90% grade when the protein per gram matters more and the lower ash ceiling fits the formula. Choose a caseinate when the powder has to dissolve, when the drink has to be near-clear, or when the process needs a heat-tolerant protein. Do not switch grades to solve a supply problem without a trial: the dispersion, the viscosity, the fill weight and the label all move together. A grade change is a specification change, and it needs a new certificate, a new allergen statement and a fresh label review. The product hub carries the catalog range; the grades page compares all three forms; the identity page shows how the micelle is proved; the methods library describes the assays; the quality page describes the release file. ### 03 Micellar casein stability: moisture, heat and the pack URL: https://nutrition.rainwoodbio.com/products/protein-collagen/micellar-casein/stability/ Reviewed: 2026-11-20 Micellar casein is a spray-dried milk protein with a 6.0% moisture ceiling and no more than 1.0% lactose. In a sealed pack it is a stable powder; opened, it takes water from the air and begins to cake and darken. A hydrated dispersion is a different material with hours, not months, of working life. Shelf life is a property of the pack and the storage condition, not of the powder alone. In one lineThe powder fails through moisture and heat, the dispersion fails through time and temperature, and the pack and process behind it set the shelf life. ## The powder: moisture, lactose and colour The 6.0% moisture limit is a release test, not a budget for storage. An opened pouch exchanges water with the room, and the powder’s large surface area speeds the exchange; a fine 80 mesh grade is more exposed than an agglomerate. As moisture rises, the as-is protein falls and the powder cakes. Lactose is present at no more than 1.0%, but it is a reducing sugar and can take part in browning when water and heat are available. The reaction binds lysine and changes colour and flavour before the protein result moves enough to notice. A brown cast on a stored sample calls for a test, not a cosmetic judgement. Light matters less, but the 2.0% fat fraction can oxidise and the colour can shift. The foil pouch blocks light; a clear jar left on a bench does not. ## The dispersion is not a solution Micellar casein does not form a solution. The micelle hydrates, swells and raises viscosity, producing an opaque suspension that settles if left alone. That is expected behaviour and it changes the stability question: what matters is how long the dispersion can be held and what the process does to it. Heat thickens it and can set a gel, so any heat step needs a trial at the actual solids, pH and hold time. Acid destabilises it near pH 4.6, the isoelectric point, where the protein precipitates; an acidic beverage is not a neutral shake with a different flavour. In a hold tank, the third risk is microbial, because a hydrated milk protein supports growth. Chilled holding and a defined hold time are process controls, not specification lines. ## What drives the change Factors that move micellar casein during storage | Factor | Effect | Control | Moisture | Higher moisture figure; lower as-is protein; caking | Sealed pouch; dry store; desiccant where needed | Heat | Faster browning and caking; gels a dispersion | Cool store; controlled process temperature | Oxygen and light | Fat oxidation; colour shift | Opaque pack; low headspace; dark store | pH | Precipitation near pH 4.6; viscosity change | Validate the matrix pH before filling | Shear and time | Hydration and viscosity climb; sediment on standing | Define mixing and hold times | Microbiology | Growth in a hydrated dispersion | Chilled hold; clean line; validated hold time None of these acts alone. Warm and humid is worse than either condition separately; a warm, neutral dispersion adds microbial risk to the viscosity problem. The practical question is always the same: which pack, which condition, how long, and measured by which tests. ## A stability protocol for the ingredient Write the pack, the condition, the time points and the test list into the protocol. The usual warehouse conditions are 25 °C/60% relative humidity for long-term and 30 °C/65% for intermediate; 40 °C/75% is the accelerated condition. Add a humidity arm if the pouch will be opened repeatedly in use. At each point measure protein with the factor and basis, moisture, fat, lactose, ash, appearance, dispersibility and microbiology. Dispersibility is easy to omit and often the first property to change: record grams per 100 mL, water temperature, shear and settled residue, not a pass/fail word. A table of “conforms” at every interval cannot show a trend. A stick pack, bar or beverage needs its own trial in the matrix. Water activity, the seal and the heat load change the rate enough that bulk data cannot be borrowed. ## The finished formula changes the answer A bar is a water-activity problem: the protein competes with humectants for water and the texture firms or softens as water moves. A stick pack is a seal problem plus a caking problem; a pinhole admits humid air and the fines set at the fold. A capsule or tablet starts dry, but the shell can still pass moisture into the fill, so moisture and appearance are checked at release and again later. A beverage adds heat, pH and time. A neutral drink needs a heat process the dispersion survives; an acidic drink needs a protein that remains dispersed at low pH, and micellar casein needs a stabiliser system to do that. Trial in the real matrix at the real pH. ## How the shelf life is set No single shelf-life number is published here, because the pack and the storage condition decide it. The retest period is written on the specification and rests on the stability file for that pack. A figure that names no pack, no condition and no test panel describes nothing that can be verified. At the end of the retest period, re-test the retained sample before extending use, and do not assume an extension. A bulk figure does not transfer to a container that was repacked later. The product hub lists the packs; the COA page sets out the release tests; the MOQ page explains packs and lead time; the methods library describes the assays; the quality page covers the release file and retained samples. ### 04 Ordering 80% micellar casein: MOQ, packs and lead time URL: https://nutrition.rainwoodbio.com/products/protein-collagen/micellar-casein/moq/ Reviewed: 2026-11-20 Micellar casein starts at 1 kg, packed in a foil pouch; the production unit is a 25 kg fiber drum. Standard 80 mesh powder is quoted at 1–7 days. To compare quotations, a buyer needs the form and protein basis, the full specification, the pack and quantity, the destination and Incoterm, the document set and the market where the product will be sold. In one lineA kilogram is the smallest unit that can carry a lot code, a certificate and a retained sample; the 25 kg drum is the same powder at production scale. ## Why the minimum is 1 kg One kilogram does several jobs at once: it is enough for a bench trial, a retained sample and an independent check, and it can travel by courier without a pallet. Because it is filled as a lot, the pouch has a code that ties it to a certificate and a manufacturing record. Anything smaller is split out of a larger lot. The split adds handling, breaks the link to the original pack and gives the buyer a sample with a new history. At the other end, a 25 kg drum cuts handling per kilogram but ties up inventory and storage. The minimum is set by what can be packed and traced, not by a discount ladder. ## Packs and formats Packs for micellar casein | Pack | Net weight | Use | Handling | Foil pouch | 1 kg | Trial work, samples, small batches | Foil keeps out moisture and light; close it after use | Fiber drum | 25 kg | Production runs | Lined drum; codes on drum and liner | Instantized powder | 1 kg or 25 kg | Faster wetting, less dust | Lower bulk density; fill weight changes | Custom sieve cut | On request | Flow or mouthfeel target | Particle-size line changes; lead time moves The catalog physical form is an 80 mesh powder, at least 95% through the sieve. Instantizing changes density, flow and wetting and is therefore a different form, not a different bag. A custom sieve cut changes the particle-size line and can add time. Tell the supplier which form is required before the quotation, not after. ## Lead time and dispatch Standard material is dispatched 1–7 days after order confirmation. That covers picking, documents and handover to the carrier; transit, customs and the buyer’s own release are outside it. An instantized lot or a custom sieve cut needs its own lead time, which should be a separate line on the quotation. Ask for a dispatch date rather than a range. A pouch travels as a parcel; a drum travels on a pallet, and the Incoterm decides who books and clears it. The COA, allergen statement and other lot papers should be in the same consignment. ## What a quotation needs A quotation can be compared when it covers six points: - Ingredient and form. Micellar casein, CAS 9000-71-9, produced by microfiltration. - Specification. Protein with factor and basis, moisture, fat, lactose, ash, particle size, metals and micro. - Pack and quantity. A 1 kg pouch, a 25 kg drum, instantized powder or a custom sieve. - Destination and Incoterm. Country, address or port, and the trade term. - Documents. COA, TDS, SDS, allergen statement and any market declaration. - Use and market. Supplement, food or other, and the country of sale. Without the market and the protein basis, the quotation cannot be compared with another. The same powder may fit one destination and fall outside the file in another, and the documents are part of what is being bought. Commercial terms appear on the quotation, not on this page. ## A sample without a lot code is a demonstration The 1 kg pouch is the qualification unit. Check identity, protein with its basis, ash, lactose, moisture and micro before scale-up, and retain material from the same pouch. The lot code on the pouch and certificate should match the one named in the quotation. A trial that needs 200 g is a repack from a bulk lot, with a new handling record; it is not the catalog pouch. Get the split in writing and keep its code with the trial. The bench powder and the production powder can come from different lots even when both meet the specification. ## Terms to settle before the first order Put commercial and quality terms on one page: Incoterm, pack, dispatch window, specification revision, a certificate per lot, allergen statement, retained sample, retest period and the change route. A quality agreement signed before the first production order is easier than the same discussion after a problem. If a lot misses the specification, the evidence is the retained sample and a re-test, run jointly, by the named method. The agreement should name the referee laboratory, say who pays, and state that a return is not decided on a photograph. Appearance alone is a weak basis for a claim in either direction. The product hub holds the 80% catalog specification; the COA page sets out the protein, ash and lactose release tests; the compliance page covers the milk-allergen file; the MOQ glossary entry explains the term; shipping and documents are on the logistics page. ### 05 The regulatory file for micellar casein URL: https://nutrition.rainwoodbio.com/products/protein-collagen/micellar-casein/compliance/ Reviewed: 2026-11-20 Micellar casein is a milk protein that has been eaten for as long as milk has; the regulatory work is not about permission for the ingredient but about the finished product’s category, the limits it must meet, the claims it may carry and the milk declaration it must show. Milk is a major allergen in the EU and the US, and the ≤1.0% lactose ceiling on this grade does not change that. The buyer’s regulatory team decides the destination route. In one lineThe material is a milk protein with a long food history; the file has to show the specification, the lot certificate, the destination route and the milk allergen declaration together. ## What the file contains Four pieces make up the file: the current specification for the grade, the certificate for the lot, the rules that apply to the finished product in its market, and a change-control record for source, process and pack. The COA belongs to the lot, the TDS carries the specification and the SDS addresses handling; none of the three settles the market route, which is recorded on its own. Milk is a major allergen in both markets discussed here. Every form of this material — micellar casein, a caseinate, acid casein — is a milk protein, so the declaration is required whatever the grade, and a lactose ceiling of 1.0% does not make the powder dairy-free. The allergen statement should be in the specification and on the certificate, and the finished label must declare milk in the form the market requires. This is the one line that never changes with grade, pack or customer. The folder should also hold the origin record, a GMO statement for the milk source, a melamine screen when a new source is qualified, and any customer-specific declaration. A versioned contents page at the front saves time in an audit. ## European Union Micellar casein is a milk protein with a documented history of consumption before 1997 and is not a novel food as of this review. In the EU the finished product is usually a food supplement under Directive 2002/46/EC, or a food; the buyer’s team sets the category and the member-state route. Milk appears in Annex II to Regulation (EU) No 1169/2011, so it must be emphasised in the ingredient list. Contaminants are governed by Regulation (EU) 2023/915, and any nutrition claim by Regulation (EC) No 1924/2006. Sports nutrition has no dedicated EU-wide category, so a sports-positioned product is checked against general food law, national rules and the claim regulation together. Great Britain has its own retained labelling rules; Northern Ireland follows the EU text. The delivery address determines which is cited. The EU regulatory notes collect the references. ## United States Under FALCPA, milk is a major food allergen, and dietary supplements are covered by the same allergen declaration. The label must name milk in the ingredient list or in a “Contains” statement. In a supplement, protein is declared in the Supplement Facts panel under 21 CFR 101.36, with the quantity and % Daily Value calculated on the 50 g protein reference for adults and children four years and older. The positioning question is separate. The supplier describes the material and the basis of sale; the buyer confirms that the ingredient and the intended use fit the dietary-supplement framework, and the brand’s reviewer checks any structure/function wording and keeps the substantiation file and the DSHEA disclaimer with it. A disease claim is not available in this framework, and this site makes no health claim. The US regulatory notes collect the references. ## Contaminants and limits Contaminant limits apply to the finished product, so a drum result is only the starting figure. The table gives the EU supplement references as of this review; the destination text and the daily dose settle the actual limit. Contaminant limits to check at the finished-product stage | Parameter | EU supplement reference | Evidence in the file | Lead (Pb) | 3.0 mg/kg | Lot result, method, limit and the dose calculation | Cadmium (Cd) | 1.0 mg/kg | Lot result and any category exception | Mercury (Hg) | 0.10 mg/kg | Lot result and method | Arsenic (As) | Set by the customer or the market | The agreed figure and the method used The figures are EU references; for the US, confirm each element against the customer specification and the state rules that apply. A result that passes on the drum can still fail when the daily dose is large, and a lot that fails one market may pass another. Convert the lot figure to the finished-product concentration and record the arithmetic in the file. That calculation is what an auditor will ask for, not the raw drum number. ## Label and claims Protein claims have thresholds. In the EU, “source of protein” requires protein to provide at least 12% of the food’s energy and “high protein” at least 20%; the energy of the finished product is the denominator, not the protein content of the powder. In the US, a protein claim is a nutrient-content claim, and the serving size and Daily Value decide whether it is met. A certificate supports none of this on its own. Statements about digestion speed, amino acid release or muscle are claims for the brand’s reviewer, not properties the specification establishes. The label should name micellar casein as the ingredient and declare milk beside it. No disease claim, no “dairy-free”, and no wording that implies milk is absent. ## Documents for the file The folder needs the COA (protein with factor and basis, ash, lactose, moisture, metals, micro), the TDS, the SDS, the allergen statement, the GMO statement, the origin record and the current specification revision. When a new source is qualified, add the melamine and cyanuric acid screen, the amino acid profile and the SDS-PAGE pattern. For the EU, add the food-history note; for the US, the supplement labelling check. Every document should cite the same specification revision. A set that quotes two versions is a common audit finding and an easy one to prevent. ## Checklist before the first order - The specification names the micellar form, the CAS number and its revision. - COA, TDS, SDS, allergen, GMO, origin and melamine documents are present. - Milk is declared in the specification, the COA and the finished label. - The metals results are expressed at the finished-product dose. - The label and any protein claim have been reviewed for the market of sale. - Any change to the source, the membrane route or the pack follows the agreed procedure. The catalog specification is on the product page; the identity page covers the analytical evidence; the quality page describes the release file. The 90% casein grade is specified on the casein page. ### 06 How we prove a micellar casein lot is micellar casein URL: https://nutrition.rainwoodbio.com/products/protein-collagen/micellar-casein/identity/ Reviewed: 2026-11-20 Four independent questions decide whether a micellar casein lot is what the certificate calls it: whether the paper file names the process and the form, whether the protein and mineral results fit a micellar grade, whether the powder disperses like a micelle rather than dissolve like a caseinate, and whether the lot can be traced to the membrane and dryer that produced it. Protein alone answers none of them, because a caseinate or a blended milk powder can reach the same percentage. The four checks below are separate for that reason. In one lineIdentity is the agreement between the nitrogen figure, the mineral pattern, the way the powder disperses and the process that made it; no single line on the certificate carries that on its own. ## The four identity layers Each layer answers a different question and needs its own evidence. A supplier who provides only the first has documented an intention, not a powder. Layers of evidence for micellar casein | Layer | Question | Evidence | What it shows | Document | Are the form and process named? | Specification, CAS, site, lot | Intent and traceability only | Protein | Is the nitrogen a milk protein? | Kjeldahl with N × 6.38; amino acid profile | Protein quantity and pattern | Mineral | Is the milk mineral still there? | Ash, calcium and phosphorus by ICP-OES | The micellar mineral load | Behaviour | Does it disperse like a micelle? | Dispersion test at fixed shear and time | The form in the drum | Provenance | Can the lot be traced to the route? | Site and membrane record; retained sample | A process trail ## The ratios that carry the identity Kjeldahl returns nitrogen, and the protein result is nitrogen multiplied by 6.38, expressed on a dry basis. The same powder reads differently at 6.0% and 9.0% moisture, and the same titration reads about 1.6 percentage points lower at 80% protein with the general factor of 6.25 than with 6.38. Both the factor and the basis therefore belong to the identity of the number. The minerals are the second check. This grade allows up to 7.0% ash, part of which is the calcium phosphate associated with the micelle. Ask for calcium and phosphorus by ICP-OES beside the ash: a micellar grade carries both, sodium caseinate carries added sodium, calcium caseinate carries added calcium. Ash without the mineral panel cannot name a form. The third check is the protein pattern. Milk contains roughly 80% casein and 20% whey protein; membrane processing removes much of the whey, so a micellar grade has a higher casein share. SDS-PAGE shows the casein and residual whey bands, and an amino acid profile distinguishes milk protein from plant protein. A powder at 80% protein with a strong whey band does not match the description. ## X-ray diffraction: a screen, not an identity test X-ray diffraction cannot prove the micelle. Casein is amorphous, so the pattern is a broad halo without crystalline peaks, and micellar casein and caseinate look alike. A supplier offering XRD as the identity test for casein is offering a test that cannot distinguish the forms. It can still answer a different question. Sharp crystalline peaks indicate a crystalline ingredient — lactose, a mineral salt or crystalline dextrose — and therefore a blend or a diluted powder rather than a pure protein. That is a useful screen for dilution, not proof of the micelle. The methods library covers the technique, and the XRD note explains what a pattern can support. ## What substitution looks like Substitution routes for micellar casein and the signals | Route | Signal | Test | Caseinate substituted | Ash and sodium or calcium move; dispersion is faster | Ash, ICP-OES, dispersion test | Whey protein added | More whey bands; casein share drops; lactose can rise | SDS-PAGE, lactose by HPLC | Plant protein present | Amino profile not typical of milk; extra bands on the gel | Amino acid profile, SDS-PAGE | Nitrogen booster added | Kjeldahl high; the amino acid sum low | Kjeldahl, amino acid profile, melamine/cyanuric acid screen | Lower-protein milk solid | Lactose and ash both climb | Lactose, ash, protein on a dry basis | Crystalline carrier added | XRD shows crystalline peaks; ash or sugar rises | XRD, lactose, ash, mass balance Appearance is the weakest evidence. Off-white to cream covers many blends, and a formulator can match it. The mineral panel, the protein pattern and the dispersion test are harder to fake. A certificate that lists appearance and protein but no identity data leaves the most likely substitution unexamined. ## How to write identity into the specification - “Micellar casein, CAS 9000-71-9, separated from skim milk by microfiltration.” - “Protein ≥80.0% on a dry basis by Kjeldahl, N × 6.38; factor and basis printed.” - “Moisture ≤6.0%, fat ≤2.0%, lactose ≤1.0%, ash ≤7.0%.” - “Calcium and phosphorus reported by ICP-OES; ash beside them.” - “Dispersion test reporting grams per 100 mL, water temperature, shear, time and sediment limit.” - “Allergen: milk declared; statement on the specification and the COA.” - “Site, membrane route, lot code and retained sample named for every lot.” ## Five questions for the supplier - How was this lot made: microfiltration of skim milk, acid precipitation, or neutralisation of acid casein? - What are the ash, calcium and phosphorus values, and what limits apply? - Can you send the amino acid profile and the SDS-PAGE pattern for the lot? - Which dispersion method do you use, and what result did this lot give? - Which site produced the lot, and do the bag, COA and retained sample share a lot code? Five answers of this kind amount to an identity file; a protein percentage on its own does not. The product hub lists the catalog specification, the COA page places each figure on the certificate, the grades page compares the forms, the casein page covers the 90% grade, and the quality page explains the retained-sample system. ### 01 What the COA for rice protein peptides actually contains URL: https://nutrition.rainwoodbio.com/products/protein-collagen/rice-protein-peptides/coa/ Reviewed: 2026-11-20 The certificate for a rice protein peptide lot reports appearance, identification against a rice protein reference, protein by Kjeldahl with the nitrogen factor printed beside it, peptide content by size-exclusion HPLC, moisture, ash, the heavy-metal panel, microbiology and particle size. Two of those lines explain little on their own: protein is arithmetic done on nitrogen, and peptide content is a size distribution read from a chromatogram. The first table carries the catalog limits; the certificate speaks for one pack. In one lineA rice peptide certificate is only complete when the protein figure carries its nitrogen factor and basis and the peptide figure carries its chromatographic cut-off and denominator. ## Reading the sheet in order Ask three questions of every row: what was measured, how, and against which limit. A row that says only “conforms” leaves a verdict without evidence. Two rows carry more weight: the protein row, because it is calculated from nitrogen, and the peptide row, because it depends on the method. Identity, protein, peptide and composition · rice protein peptides | Parameter | Method | Release limit | Appearance | Visual | Off-white to cream powder | Identification | Amino acid profile against a rice protein reference | Protein profile conform | Protein | Kjeldahl, N × 5.95, dry basis | ≥80.0% | Peptide content | SEC-HPLC, cut-off stated | ≥70.0% | Moisture | Gravimetric, vacuum oven | ≤7.0% | Ash | Gravimetric, muffle furnace | ≤3.0% The ash row is not housekeeping here. Hydrolysis is stopped or neutralised with a base, and the salt that remains reports as ash. The 3.0% ceiling keeps a peptide powder from carrying a large neutralisation load, and it is the first line to read when a peptide figure is high but the powder tastes salty. ## Two calculations, two bases Protein here is nitrogen multiplied by 5.95, the cereal factor, on the dry basis. The number is not a direct protein measurement: the laboratory measures nitrogen and applies the factor. The general labelling factor of 6.25 gives a different figure for the same nitrogen. A lot at 80.0% by 5.95 holds about 13.4% nitrogen, which reads 84.0% under 6.25. Both figures can be true; only one belongs on the certificate you agreed. The dry basis is the other half of that statement. At the 7.0% moisture ceiling, 80.0% on the dry basis is about 74.4% on the powder as weighed. A buyer who compares that as-is figure with a dry-basis limit will reject a lot that conforms, and a supplier who presents the dry figure as if it were as-is is overstating the powder. The factor and the basis belong inside the protein row; a footnote does not carry them. Peptide content is a different measurement. SEC-HPLC separates the soluble fraction by size and reports the share below a stated cut-off, usually somewhere between 5 and 10 kDa. The cut-off and the denominator both matter. A peptide figure expressed on the protein and one expressed on the powder differ by the protein content: at 80.0% protein, 70.0% on the protein is 56.0% on the powder. The certificate should name the denominator, and the specification should fix the method with it. The two lines come from different instruments and do not have to add up: nitrogen counts free amino acids, which a peptide cut-off may exclude. ## Release limit versus batch result Keep parameter, method, limit and result in separate columns; a result column filled with the specification range is a copy of the gate. The table shows the shape it should take. Limit and the result the certificate should print | Parameter | Limit | What the result reads | Protein | ≥80.0% with factor and basis | The measured figure, with the factor and basis repeated | Peptide content | ≥70.0% by SEC-HPLC | The percentage, the cut-off and the denominator | Moisture and ash | ≤7.0% and ≤3.0% | Measured percentages, read together with the protein | Heavy metals | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | A figure for each element, inorganic arsenic included | Microbiology | A plate count plus absence tests | The count and the absence result for the lot | Particle size | ≥95% through 80 mesh | The sieve result, as a percentage passing Arsenic earns its own line rather than a place in a combined total. Rice takes inorganic arsenic from the paddy soil, and the bran fraction carries more than the polished grain. A certificate that reports one combined metal total hides the element this crop is most likely to carry. Microbiology is evidenced the same way: a count plus an absence statement, not the word “pass”. ## What moves between batches The rice source moves the specification before the enzyme does. Brown rice carries bran residues that raise ash, fiber and arsenic; white rice gives a paler, lower-ash powder; broken rice is a milling stream whose quality follows its own record. A change of rice supply can move the ash and the arsenic result without any change in the hydrolysis line. Hydrolysis moves the peptide distribution. Enzyme dose, temperature and time decide where the curve sits; a longer hold pushes more of the protein below the cut-off, raises the free amino acid fraction and shifts the taste. The peptide result is a process fingerprint, not a fixed property of the source. Neutralisation and drying move the rest. The base used to stop the enzyme leaves salt, which reports as ash; the dryer moves moisture, colour and bulk density; the sieve moves the 80 mesh figure. None of those changes the protein, and all of them appear on the certificate. Read the direction across lots — peptide drifting toward its floor, ash climbing, moisture creeping up — rather than one result near an edge, and make sure the lot code follows the pouch, the drum and the sample held back. ## When to commission an outside test Commission an independent laboratory for a new rice source, a first shipment into a regulated market, a peptide claim the supplier's certificate does not demonstrate, or a disputed result. The aim is to answer what the sheet leaves open, not to reproduce the sheet. The panel is Kjeldahl with Dumas as a cross-check, the full amino acid profile, SEC-HPLC with the cut-off named, moisture and ash, ICP-MS with inorganic arsenic reported separately, and microbiology. Add a melamine and urea screen if the nitrogen will not reconcile with the amino acids, and a soy or wheat ELISA if the line is shared. Ask for the detection limit beside every screen; “not detected” without a limit describes the method, not the powder. Hold the tested powder beside the retained sample. ## How two offers should be compared Set six lines side by side: rice source and process; nitrogen factor and basis; protein and peptide figures with the cut-off and the denominator; moisture and ash; inorganic arsenic and cadmium; mesh and pack. Two quotations that agree on protein but differ on the peptide method or the factor are not describing the same powder. The catalog specification is on the rice protein peptides page. The tests that separate a peptide from a diluted isolate are on the identity page; the intact isolate is compared on the level-four page; the separation is described in the HPLC method note; release is on the quality page. ### 02 Rice protein peptides, isolate or concentrate: choosing the grade URL: https://nutrition.rainwoodbio.com/products/protein-collagen/rice-protein-peptides/grades/ Reviewed: 2026-11-20 The grade of a rice protein peptide is four decisions at once: how far the base protein has been hydrolysed, whether that base was an isolate or a concentrate, which rice it came from, and what physical form the powder takes. The catalog grade is a peptide at ≥80.0% protein by Kjeldahl on the dry basis and ≥70.0% peptide by SEC-HPLC, milled to 80 mesh. A purchase order that names only “rice protein peptides” has left the peptide fraction and the base open. In one lineFor a peptide the grade is the peptide fraction plus the base protein and the physical form; the protein percentage alone does not name the product. ## Why rice peptides come in several grades A rice peptide is made by taking a rice protein isolate and cutting it with a protease. The degree of hydrolysis sets how much of the protein ends up below the peptide cut-off, and that single variable moves the dispersion, the taste, the osmolality and the ash. A lightly hydrolysed powder still behaves much like the isolate; a heavily hydrolysed one disperses readily but carries more free amino acids and a stronger savoury note. The base protein is the second variable. A peptide made from an 80% isolate starts with little starch and a low ash; one made from a concentrate carries more fiber, carbohydrate and mineral through the process, and the certificate shows it on the protein and ash lines. The rice source is the third: brown rice brings bran residues and more inorganic arsenic, white rice gives a paler and lower-ash base, and broken rice is a milling stream that has to be named rather than assumed. The physical form is the fourth. The catalog powder runs at 80 mesh; a granulated version flows better and makes less dust, and a diluted version delivers less peptide per gram. Those are different specifications, not packing choices. ## The grades side by side Rice peptide grades compared | Grade | Protein | Peptide | What changes | Watch | Intact isolate | ≥80% | No peptide line | No hydrolysis; the powder settles in water | Dispersion; label name | Catalog peptide | ≥80.0%, N × 5.95, dry basis | ≥70.0% by SEC-HPLC | Shorter chains; dispersible, slightly turbid | Method, cut-off, denominator | Higher-hydrolysis peptide | ≥80% | Above the catalog floor, quoted on request | More free amino acids; stronger taste; higher osmolality | Taste; ash; agreed specification | Peptide from a concentrate | 60–70% | Declared | Starch and fiber carried through | Protein; ash; carbohydrate | Granulated peptide | As the base | As the base | Flow and dust; slower wetting | Particle size; dispersion time | Peptide on a carrier | Diluted | Diluted | Less peptide per gram | Carrier on the label The second row is the catalog grade and the third is the one most often quoted against it. Both may be described as “rice peptide”, yet a higher peptide figure bought without a stated cut-off can be a different measurement rather than a better powder. Fix the method before comparing the number. ## Colour, bulk and powder behaviour The catalog powder is off-white to cream, free-flowing at 80 mesh, and it disperses in water to a slightly turbid liquid rather than a clear solution. That is how the material behaves, not a defect in the lot: the peptide fraction is soluble enough to stay suspended, and the remaining intact protein and fiber scatter light. A peptide is more hygroscopic than the isolate it came from. Free amino acids and the salt left by neutralisation both take up moisture, so an open pouch in a humid room will cake faster than the isolate would. The 7.0% moisture limit is a release gate; the in-use period after opening is a separate promise and belongs in the specification. Granulation changes the powder without changing the chemistry. A granulated peptide wets more slowly and disperses with less dust, which matters on a filling line; the sieve result moves from the 80 mesh line to the granule's own distribution, so the specification has to be rewritten rather than annotated. ## Dose arithmetic by dosage form At 80.0% protein and 70.0% peptide on the powder, a 1 g serving carries 800 mg protein and 700 mg peptide, leaving about 100 mg of the protein outside the peptide fraction. A 500 mg capsule holds 400 mg protein and 350 mg peptide, so a two-capsule serving delivers 800 mg protein. Read the denominators before doing the arithmetic: a 70.0% peptide figure expressed on the protein rather than the powder gives 560 mg per gram, not 700 mg. A stick pack is the natural format for the peptide because the consumer mixes it fresh. The load per stick is limited by taste and osmolality as much as by protein: a heavily hydrolysed powder at 5 g per stick carries 4 g protein and enough free amino acids to be tasted. A capsule or tablet format wants the 80 mesh powder, or a granulate where the fill weight and the flow rate need it. Tablets are the hardest format for this material. The peptide is compressible only up to a point, and a high load needs a granulation step and a binder; the tablet then carries the granulation's particle size, not the catalog 80 mesh. ## What the specification has to say - “Rice protein peptides, also labelled hydrolysed rice protein, with the rice source named.” - “Protein ≥80.0% by Kjeldahl, N × 5.95, dry basis; the basis printed on the certificate.” - “Peptide content ≥70.0% by SEC-HPLC, with the cut-off and the denominator stated.” - “Moisture ≤7.0%; ash ≤3.0%; appearance off-white to cream powder.” - “Inorganic arsenic reported separately; Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg.” - “Particle size ≥95% through 80 mesh; microbiology as listed.” - “Enzyme used in hydrolysis and the neutralisation route recorded in the process description.” We supply the catalog peptide. A different degree of hydrolysis is a different purchase with its own specification and its own sample; a substitution needs a written change control and a new specification. ## When the intact isolate is the right buy If the label names rice protein and the finished product is a bar, a bakery item or a powder blend where dispersion does not decide the quality, the hydrolysis step buys little. The isolate carries the same protein figure and a simpler file, and its taste is neutral in a matrix that already has flavour. If the requirement is a clear drink, neither material answers it. A rice peptide disperses but stays slightly turbid; a clear beverage needs a different protein or a clarification step, and accepting a peptide as “the clear one” leads to a sediment complaint later. The product hub carries the catalog specification, and the rice protein page carries the intact isolate. The level-four comparison takes peptide size, dispersion and the label further; the COA page shows how the peptide line is reported; the HPLC method note describes the separation. ### 03 Rice protein peptides are stable when dry; the pack sets the shelf life URL: https://nutrition.rainwoodbio.com/products/protein-collagen/rice-protein-peptides/stability/ Reviewed: 2026-11-20 Rice protein peptides are stable as a dry powder as long as the pack keeps moisture out. What goes wrong is moisture pickup, caking, browning where heat meets a residual sugar, and, once water is added, sediment and microbial growth. Water and heat drive the chemistry; light matters far less for an off-white powder in an opaque pack. Shelf life is assigned from data for the exact pack, not from the certificate. In one lineThe powder holds its peptide profile behind a moisture barrier, so the shelf life is set by the pack, the seal and the storage humidity rather than by the certificate. ## The powder: moisture, caking and colour The catalog limit is ≤7.0% moisture, and that figure is a test at release; it says nothing about how much water the powder will take up in a store. Hydrolysis leaves free amino acids and a salt load from neutralisation, and both attract water. Once the foil is open, the powder can move from free-flowing to caked within days in a humid room. Caking is the visible symptom; browning is the one that changes the certificate. Peptides and free amino acids react with residual reducing sugars in the presence of heat and water, and the powder darkens from off-white toward tan. The reaction consumes lysine, so a long, warm, humid storage can move the amino acid profile as well as the colour. A cool, dry store slows both. There is no light-sensitivity story to tell about this material, but there is a pack story. The 1 kg foil pouch and the 25 kg fiber drum are both moisture barriers, and the seal is the weak point. A pouch folded over after opening is not resealed; the headspace now holds humid air, and the in-use period should be written for that condition rather than for the intact pack. ## The solution: turbidity first, then sediment In water the peptide forms a slightly turbid dispersion. Turbidity is expected and is not a sign of failure: the fraction above the cut-off and any residual fiber scatter light. What changes with time is the sediment. The intact protein left in the powder is insoluble, and gravity brings it down; the rate depends on the concentration, the pH and whether the process homogenised the mix. Heat is the second variable. A pasteurisation step or a hot fill adds a heat load the dry powder never meets, and the remaining intact protein can coagulate, which shows up as haze and a heavier sediment. A short, validated heat step is easier on the dispersion than a long hold at the same temperature. pH decides how much of the protein stays dispersed. Near its isoelectric point the intact fraction is least soluble, so a formula acidified into that region will throw more sediment than one held away from it. A protein dispersion also supports microbial growth, which is a different risk from a low-pH or a high-sugar beverage; the preservative system and the heat treatment belong in the validation, not in the ingredient specification. ## What drives change Factors that move rice protein peptides during storage | Factor | Effect on the powder | Control | Moisture | Caking, and a lower protein figure on the as-weighed powder | Sealed pouch; low-humidity store | Heat | Browning with residual sugars; coagulates protein in solution | Cool store; short validated heat step | Reducing sugars | Maillard reaction with peptides and free amino acids | Low-sugar matrix; specification limit | pH | Least solubility near the isoelectric point; more sediment | Formulate away from the isoelectric region | Microbiology | Growth in a protein solution; spoilage and gas | Heat treatment; preservative; low water activity | Oxygen | Slow oxidation of the small lipid fraction; off-note | Low headspace; sealed pack These factors compound. A warm, humid store and a reducing-sugar excipient in the same blend are worse together than either is alone, and a solution at its isoelectric point in a warm tank combines the two failure modes that matter most. The useful question is not whether the peptide is stable but in which pack, matrix and condition, for how long. ## A stability protocol for the ingredient A stability plan fixes four things before it starts: which pack, which store, which time points and which tests. Keep a lot at 25 °C/60% relative humidity for the long term and at 30 °C/65% relative humidity as an intermediate condition; 40 °C/75% relative humidity is the accelerated arm, chosen to test the pack and the seal. Add a solution arm if the customer will hold the peptide in water before filling. Test protein with its factor, peptide content by SEC-HPLC, moisture, ash, appearance and microbiology at each point. The peptide line belongs in the panel because the distribution is the specification that can move: aggregation, further hydrolysis or a change in solubility all show there first. Report each result rather than a summary verdict, and tie the report to a pack and a lot family. Ask for data on the pack you will actually buy. A drum and a pouch hold different headspace, present a different surface area per kilogram and are opened a different number of times, so one pack's figures do not transfer to the other. ## The finished formula changes the answer A stick pack usually fails at the seal. A pinhole in the laminate lets humid air into a hygroscopic powder, and the stick cakes before the assay moves, so the strip is checked as well as the powder. A capsule format starts dry, but the shell can pass moisture into the fill, so the powder is re-checked for moisture and caking after storage, not only at release. A tablet carries the granulation's moisture and its particle size, and a high peptide load leaves little room for a binder. A ready-to-drink product is the hardest case: heat, pH, sediment and microbiology act at once, and the ingredient's bulk stability is only a starting point. None of those formats inherits the bulk pouch's shelf life. ## How the shelf life is set There is no single shelf-life figure for rice protein peptides, because the pack and the storage conditions decide it. The retest period that goes onto the specification has to come from a stability file for that pack. Quoted alone, without a pack, a condition and a test panel, a number is a marketing line rather than a shelf life. Once the retest period has passed, re-test the retained sample before extending use; a figure earned by the bulk powder does not follow it into a repacked drum or a granulated lot. Standard packs are listed on the product hub; the release tests are set out on the COA page; pack sizes and lead time are on the MOQ page; the assay is described in the HPLC note; and the release workflow sits on the quality page. ### 04 Rice protein peptides: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/protein-collagen/rice-protein-peptides/moq/ Reviewed: 2026-11-20 Rice protein peptides ship from 1 kg: a foil pouch for trials, a 25 kg fiber drum for production, and 1–7 days for the catalog grade. A quotation only works if it fixes six things: the hydrolysis grade, the factor and basis, the peptide method and cut-off, the pack, where it lands, and the paperwork. In one lineOne kilogram is the first pack size that is sealed, coded and traceable on its own, which is what a hygroscopic peptide needs before a trial. ## Why one kilogram is the floor A kilogram is the smallest quantity sold as a pack in its own right. It is enough for a bench mix, a retained sample and an outside check on the protein and peptide figures, and it flies as a parcel with a lot code attached. At a 5% inclusion in a blend it yields 20 kg of finished powder, which covers a pilot and a taste panel. Anything under a kilogram is cut from a larger lot and repacked: more handling, a broken link to the original pack, and a protein figure that is harder to follow back. The drum suits production: less handling per kilogram, but more stock held for longer. The minimum is a pack decision, not pressure to buy volume. ## Packs and formats Rice protein peptide packs and what each is for | Pack | Net weight | Where it fits | Handling note | Foil pouch | 1 kg | Trials and samples | Moisture barrier; close it again after weighing | Fiber drum | 25 kg | Production | Sealed liner; lot code on drum and liner | Granulated peptide | On request | Flow and dust control | New sieve result, new specification | Peptide on a carrier | On request | Lower peptide per gram | Carrier named on the label The catalog powder passes 80 mesh. A granulate or a diluted powder is a different specification rather than a packing option; raise it before the quote: the sieve line and the paperwork change with it. ## Lead time and dispatch The catalog grade is quoted at 1–7 days after the order is confirmed. Picking, documents and dispatch sit inside that window; freight, customs and the customer's own release sit outside it. A different degree of hydrolysis, a granulate or a non-standard pack is quoted on its own line, with its own timing. Ask for the dispatch date rather than the range. The drum goes on a pallet, the pouch as a parcel, and the Incoterm decides who books the freight and who handles entry. The lot documents should leave with the pack. ## What a quotation has to state Six details make two quotations comparable: - Product and grade. Rice protein peptides, with the degree of hydrolysis and the rice source named. - Specification. Protein with its factor and basis, peptide with its method and cut-off, moisture, ash, the metal panel including inorganic arsenic, microbiology and mesh. - Quantity and pack. Pouch, drum, granulate or carrier, with the net weight stated. - Where it lands. Country, delivery point and trade term. - Paperwork. COA, TDS, SDS, allergen and non-GMO statements, plus the enzyme source. - What it is for. Supplement or food, and the country where the finished product will be sold. A quote that omits the peptide method and the destination cannot be compared with another. The same 80% protein figure can describe two different powders, and the paperwork travels with the offer. Commercial terms are not published on this page. ## A sample without a lot code is a demonstration Qualify from the 1 kg pack: protein with its factor, peptide with the cut-off, moisture, ash, inorganic arsenic and the micro count. Hold back a retained sample from that pack, and make the sample, the certificate and the quote agree on one lot code. Without that code, the trial has nothing to point back to. A bench quantity under a kilogram is split off a drum. Give it its own lot record and write the split down; the bench sample and the drum need not share a lot. Because the peptide is hygroscopic, weigh quickly and reseal: a caked sample describes the bench, not the lot. ## Terms to settle before the first order Put the commercial and quality terms into one conversation: Incoterm, pack, dispatch window, specification revision, COA per lot, retained sample, retest period and the route for a change. A quality agreement signed before the first production order is easier than one negotiated after a dispute. If a lot fails the agreed specification, the retained sample decides it: a joint re-test against the named method, with the referee laboratory and the cost of it agreed in advance. A return argued from a photograph is hard to settle for either side. The catalog specification sits on the product hub; the release tests are listed on the COA page; the market files are on the compliance page; the MOQ glossary entry defines the term; the quality page describes the release file. ### 05 The regulatory file for rice protein peptides URL: https://nutrition.rainwoodbio.com/products/protein-collagen/rice-protein-peptides/compliance/ Reviewed: 2026-11-20 Rice protein peptides are a food derived from rice, so the regulatory file is built around the food, the process and the destination rather than around a novel ingredient. Rice has a long history of consumption in the EU and is not one of the fourteen allergens that must be emphasised on an EU label; the hydrolysis step, the enzyme and the arsenic result are the parts that need their own evidence. The route for the destination is a decision for the buyer's regulatory team. This page lists what belongs in the file. In one lineA specification says what the powder is; a regulatory file says where it may be sold, at what contaminant limits and under what label. ## What the file contains Four documents answer four different questions: which specification version applies, which certificate released the lot, which limits and label rules the finished product has to meet, and how a change of rice source, enzyme or pack would be handled. The COA reports the lot; the TDS carries the specification; the SDS covers handling. None of the three speaks for the destination market. Beyond the certificate, the pack should carry the allergen statement, the non-GMO statement, the origin of the rice, the enzyme source and a description of the hydrolysis and neutralisation. Those records are what let a buyer answer a questionnaire without going back to the plant. Put a dated document index at the front of the folder. ## European Union Rice protein is not a novel food in the EU on the basis of its history of use before 15 May 1997, and the hydrolysis step does not by itself change that position; the buyer's team confirms the status of the specific preparation against the current Union list as of this review. Rice is not among the allergens in Annex II of Regulation (EU) No 1169/2011, so a rice peptide does not trigger an allergen emphasis of its own — the shared-line statement is a separate matter. Two other instruments sit alongside. Maximum levels for inorganic arsenic in rice and rice-based products are set in Regulation (EU) 2023/915, and whether a rice protein hydrolysate falls under one of those categories, and at what level, is a question for the buyer's team; the answer decides what the certificate has to demonstrate. Protein claims are governed by Regulation (EC) No 1924/2006, which allows “source of protein” where at least 12% of the energy value comes from protein and “high protein” at 20%. Check the current consolidated text. ## United States In the US the route depends on the product, not the powder. A supplement use sits under the dietary-ingredient provisions; a conventional food use needs the ingredient to be GRAS or prior-sanctioned, and the supplier supports that file rather than making the determination for the customer. Rice is not a major food allergen under the US labelling rules, so no allergen statement is triggered by the rice itself; sesame, milk, egg, wheat and soy on a shared line still are. The protein declaration is the practical difference. Nutrition labelling calculates protein as nitrogen × 6.25 under 21 CFR 101.9(c)(7), while this specification states the protein as N × 5.95 on the dry basis. The same powder therefore reads about 84.0% under the labelling factor and 80.0% on the certificate, and both figures are correct for their purpose. A protein content claim must also satisfy the protein-quality provision before it can be made, and rice protein is low in lysine — the reason a rice-only product is often blended. ## Contaminants and limits A contaminant result has to be read at the finished-product level, not only on the drum. The table is where a supplement file usually starts; the destination text and the daily dose set the final figure. Contaminants to confirm for a rice peptide file | Parameter | Why it matters for rice | What the file should show | Inorganic arsenic | Taken up from paddy soil; bran carries more | A separate result, not a combined metal total | Cadmium | Rice takes cadmium up from the soil | Lot result and the finished-product calculation | Lead | General contaminant; soil and equipment | Lot result, method and limit | Mercury | General contaminant | Lot result and method | Microbiology | A protein powder supports growth once wetted | Counts and absence statements for the lot ## Claims and the label On the label the ingredient is named as rice protein or hydrolysed rice protein, with the quantity per serving, in the form the market requires. A “plant protein” or “vegan” claim is a composition claim, not a health claim, and it depends on the enzyme: a protease from an animal source would contradict it, so the enzyme source belongs in the file before the claim is printed. Protein claims have conditions. In the EU the energy-share thresholds above apply; in the US the protein-quality provision applies. The certificate does not settle either question. No disease-related claim is offered for this material in any market, and the site publishes the specification without a health claim. A structure/function statement is reviewed by the brand against the finished product, with substantiation and the disclaimer the market requires. ## Documents for the file Start the buyer's pack with the COA: the protein factor and basis, the peptide result with its SEC cut-off, moisture, ash, inorganic arsenic and the rest of the metal panel, and the micro count. Add the specification, the TDS, the SDS, the allergen statement, the non-GMO statement, the rice origin, the enzyme source, the process description and, where claimed, the organic certificate. A nutritional analysis with the amino acid profile supports the label declaration. Keep the documents versioned against the specification. A change of rice source, enzyme or neutralisation route is a change to the file, and the customer should hear about it before the next lot ships rather than after a label has been printed. ## Checklist before the first order - The specification revision names the product, the rice source and the peptide method. - The COA, TDS, SDS, allergen, non-GMO, origin and enzyme documents are present and current. - Inorganic arsenic and cadmium are reported separately and calculated into the finished-product intake. - The label and its wording have been reviewed against the destination rules. - The protein declaration basis matches the factor used on the label. - Rice source, enzyme and pack are covered by change control. The catalog specification lives on the product page; the identity page sets out the analytical evidence; the EU regulatory notes collect the framework references; the Annex II glossary entry explains the allergen list; the quality page describes the release file. ### 06 How we show a rice peptide lot is what it says URL: https://nutrition.rainwoodbio.com/products/protein-collagen/rice-protein-peptides/identity/ Reviewed: 2026-11-20 Rice protein peptides have no CAS number and no single molecular weight, so a lot is what the measurements say it is. Five have to agree: the rice source and the hydrolysis record are named; the nitrogen arithmetic backs the protein claim; the size-exclusion curve backs the peptide claim; the amino acid pattern is consistent with rice; and ash and moisture account for the rest of the mass. A peptide figure alone is weak evidence, because the method and the cut-off can be chosen to produce it. In one lineIdentity for a hydrolysate is a set of agreeing measurements, because the material has no CAS number and no single molecular weight to check against. ## The five identity layers A certificate can carry the right name and still prove very little. Each layer below answers a different question, and a supplier who stops at the first has shown the paperwork rather than the powder. Five layers of rice peptide identity | Layer | Question it answers | Evidence | What it establishes | Document | Are the source and the process named? | Rice source, enzyme, process record | Paperwork only | Nitrogen | Does the nitrogen support the protein claim? | Kjeldahl, N × 5.95, dry basis | Nitrogen, not protein | Peptide | How much sits below the cut-off? | SEC-HPLC with the cut-off stated | A size distribution, not a species | Species | Is the protein rice? | Amino acid profile against a rice reference | A rice-consistent pattern | Balance | Is the powder diluted or salted? | Ash, moisture, free amino acids | Consistency of the numbers The third layer is the one that separates a peptide from an isolate, and it is also the one most easily quoted without a method. The fourth layer is the only one that speaks to the source; a peptide figure says nothing about which plant the protein came from. ## The ratios that carry the check The first is peptide against protein. At the catalog limits, 70.0% peptide and 80.0% protein on the powder give a ratio of 0.875, and the two numbers must satisfy the same denominator. A peptide figure above the protein figure means the two sit on different bases or one is wrong, and the chromatogram deserves a look before the lot is booked in. At 80.0% protein, 70.0% taken on the protein is 56.0% when taken on the powder, so the same words describe two different powders. The second is protein against ash. At the protein floor with ash at its ceiling the ratio is about 26.7:1. A lot at the same protein with a much lower ratio is carrying neutralisation salt or a carrier, and the taste agrees with the ash. A much higher ratio alongside a high protein figure suggests a washed base. Neither ratio releases a lot, but both can be read off a certificate that already prints the two lines. The third check is the factor. The same nitrogen reads differently under 5.95 and 6.25 — about four points apart at this protein level — so two certificates can disagree without either laboratory being wrong. Ask which factor each supplier applied before the two are compared. ## What diffraction can and cannot show A spray-dried peptide is amorphous, so its diffraction pattern is a broad halo rather than a set of sharp reflections. That makes XRD a useful screen for a crystalline adulterant — salt from neutralisation, a mineral filler, a sugar alcohol — and a poor identity test for the peptide itself. A sharp pattern in a powder that should be amorphous is a question, not an answer. The halo can be compared with a reference pattern, but no halo is a fingerprint of rice. The species question calls for the amino acid profile and, if the DNA has survived the process, a rice-specific PCR. A line reading only “XRD conforms” establishes an amorphous powder; it says nothing about the species. ## What adulteration looks like Rice peptide substitutions and what they leave behind | Substitute | Effect on the powder | Warning sign | Check | Rice flour or starch | Adds starch and water-binding solids | Protein and peptide fall, starch rises | Starch, iodine, mass balance | Soy or wheat protein | Raises protein and lysine; adds gluten | Lysine ratio up; gluten ELISA positive | Amino acid profile, ELISA, PCR | Free amino acids | Lifts nitrogen and flavour without peptide | Free amino acid fraction high | Free amino acid panel, SEC | Neutralisation salt | Raises ash; salty taste | Ash above 3.0% | Ash, sodium by ICP-OES | Nitrogen spiking | Lifts the nitrogen figure without adding protein | Nitrogen out of step with the profile | LC-MS/MS screen, nitrogen balance | Water | Raises moisture; caking | Moisture above 7.0% | Moisture, loss on drying Appearance is the weakest of the signals. Off-white to cream covers a wide range, and a bleached powder sits inside it. The amino acid pattern, the ash figure and the peptide distribution, read with its method, are the ones to weigh. ## What the identity clause should say - “Hydrolysed rice protein, with the rice source named and the enzyme recorded.” - “Protein ≥80.0% by Kjeldahl, N × 5.95, dry basis; factor and basis on the certificate.” - “Peptide content ≥70.0% by SEC-HPLC, with the cut-off and the denominator stated.” - “Amino acid pattern checked against a rice reference, with lysine and glutamic acid reported.” - “Moisture ≤7.0%; ash ≤3.0%; no carrier unless declared.” - “Inorganic arsenic and cadmium reported separately from the metal total.” ## Five questions for the supplier - Which rice source was hydrolysed, and which enzyme was used? - Which SEC cut-off and which denominator produced the peptide figure? - What ash, moisture and free amino acid figures accompany the peptide result? - What is the inorganic arsenic result, and was it measured separately? - If a result is challenged, will you re-test the retained sample with us? An identity file can be built from five answers like these; a single peptide percentage cannot. The catalog specification sits on the product hub; the COA page shows which certificate line carries each figure; the grades page compares the peptide with the intact isolate; the level-four comparison works through dispersion and the label; the methods library covers the separation and the detection limits. ### 02.1 Rice protein peptides vs rice protein: peptide size, dispersion and the label URL: https://nutrition.rainwoodbio.com/products/protein-collagen/rice-protein-peptides/grades/rice-protein-peptides-vs-rice-protein/ Reviewed: 2026-11-20 The two products start from the same rice and differ by one process step. Rice protein is the intact isolate: a protein at ≥80% by Kjeldahl, mostly glutelin, which disperses in water as a suspension and settles. Rice protein peptides are that isolate cut with a protease until the peptide figure reaches 70.0% by SEC-HPLC; the powder disperses to a slightly turbid liquid instead of a settling one. The hydrolysis changes dispersion, taste and the label, and it does not change the rice source or the protein figure. In one lineThe hydrolysis step shortens the protein into peptides, which changes how the powder disperses and what the label can say, but not the source or the protein figure. ## The same source at two stages An isolate is made by separating rice protein from starch. The product is a large, multi-subunit glutelin complex, insoluble in water, that has to be suspended rather than dissolved. A peptide is made by adding a protease to that isolate, holding it until the chains are short enough, stopping the enzyme and drying the result. The protein figure stays near the same level; what changes is the size of the molecules and the salt left by the neutralisation. Rice protein isolate and rice protein peptides | Property | Rice protein | Rice protein peptides | Protein | ≥80% by Kjeldahl | ≥80.0%, N × 5.95, dry basis | Peptide content | No peptide line | ≥70.0% by SEC-HPLC | Process step | Extraction and separation | Extraction, hydrolysis, neutralisation, drying | Water behaviour | Suspension; settles | Disperses; slightly turbid; sediments slowly | Ash | ≤3.0% | ≤3.0% | Moisture | ≤7.0% | ≤7.0% | Mesh | ≥95% through 80 mesh | ≥95% through 80 mesh | Label name | Rice protein | Hydrolysed rice protein or rice protein peptides The two protein figures are not directly comparable until both are on the same basis. The isolate is specified by Kjeldahl without a factor on the page; the peptide states 5.95 and the dry basis. A buyer comparing 80% with 80% may be comparing two factors and two moisture corrections. ## What peptide size means, and what the cut-off hides Hydrolysis cuts peptide bonds, and the degree of hydrolysis (DH) is the share of those bonds that were cleaved. DH is measured from the free amino nitrogen against the total nitrogen, and it is not the same number as the peptide content reported by SEC-HPLC. A powder can have a high DH and still fail a peptide figure if the cut-off is set small; a low DH can pass a generous cut-off. That is why the certificate has to name both the method and the cut-off. Size matters for behaviour. Large fragments still scatter light and settle; short peptides and free amino acids stay in solution, taste of the broth and raise the osmolality of a drink. The catalog floor of 70.0% peptide leaves room for a mixed distribution, and two lots that both read 72.0% can behave differently in a stick pack if their distributions differ. ## Dispersion is not solubility The isolate disperses but does not dissolve. Rice protein is largely glutelin, a fraction that stays insoluble, so a drink built on the isolate needs a stabiliser or homogenisation to keep the powder up. The peptide behaves better because the short chains and free amino acids hold the powder in suspension, but the liquid is still slightly turbid. Neither material gives a clear drink. That difference decides a format. A stick pack that the consumer shakes and drinks within minutes tolerates the isolate; a ready-to-drink bottle that stands for months needs the peptide and, even then, a process that controls sediment. A clear beverage needs a different protein altogether, and choosing the peptide as “the soluble one” leads to a sediment complaint after the first pallet. ## Taste and osmolality move together The isolate is bland and slightly chalky, which is why it works in a bar or a flavoured blend. Hydrolysis releases peptides and free amino acids that carry a savoury, broth-like note, and the longer the hydrolysis the stronger it gets. Rice is milder than soy or pea at the same DH, but a high-hydrolysis rice peptide is not tasteless. Osmolality is the second consequence. A gram of peptide is more particles in solution than a gram of intact protein, and free amino acids add more; a drink built on peptides therefore carries more dissolved particles, tastes more savoury and feels heavier in the mouth than the same protein load from the isolate. The load per serving is a formulation decision, and it belongs in the trial rather than in the specification. ## What the label has to say The ingredient name changes with the process. “Hydrolysed rice protein” and “rice protein peptides” describe the peptide; “rice protein” describes the isolate, and using the shorter name for the hydrolysed powder is a labelling error. In the EU, the protein claim thresholds of 12% and 20% of energy value apply to the finished product, not to the powder, and they are checked on the nutrition declaration. In the US the panel declares protein as nitrogen × 6.25 (21 CFR 101.9(c)(7)), while the specification states 5.95 on a dry basis. That powder can read 80.0% on the certificate and about 84.0% on the panel. A protein content claim also has to clear the protein-quality provision, and rice protein is low in lysine, so a rice-only product often carries a blend or a supplementary amino acid. No disease-related claim is open in either market. ## When to choose which Choose the isolate when the label names rice protein, the matrix tolerates a suspension, and the hydrolysis step would buy nothing. Choose the peptide when dispersion, a shorter time to hydrate or a savoury note is the point, and accept the taste and the osmolality that come with it. A blend of the two is a common answer: the peptide carries the dispersion, the isolate carries the protein load and the neutral taste. The switch is a change control, not a substitution at the balance. Protein basis, peptide method, ash and label name all move, and the finished product has to be re-tasted and re-labelled. The rice protein peptides page carries the peptide specification and the rice protein page carries the isolate; the grades page sets this pair among the other rice grades; the COA page shows where the peptide figure sits on the certificate; the HPLC method note covers the separation. ### 01 What the COA for sodium caseinate actually contains URL: https://nutrition.rainwoodbio.com/products/protein-collagen/sodium-caseinate/coa/ Reviewed: 2026-11-20 A sodium caseinate certificate reports protein by Kjeldahl on a dry basis with N × 6.38, the sodium figure that identifies the salt, and the remaining composition, physical and microbiological lines. The protein says how much casein is present, the sodium and ash say which caseinate it is, and the moisture converts the dry-basis figure to the powder as weighed. Release limits belong to the specification; results belong to the lot, in separate columns. In one lineA sodium caseinate certificate is read on a dry protein basis with the sodium and ash beside it: the protein says how much casein, the sodium says which salt, and the moisture converts both to the powder as weighed. ## What the sheet has to list The parameter list follows the specification rather than a template. Composition and physical lines describe the powder and its handling; contaminants and microbiology describe what came with it. A sodium caseinate sheet is not complete without the protein basis and the sodium figure, because those two lines separate this salt from calcium caseinate and from micellar casein. Composition and physical parameters · sodium caseinate, catalogue limits | Parameter | Method | Release limit | Appearance | Visual | Off-white to cream powder | Protein (dry basis) | Kjeldahl, N × 6.38 | ≥90.0% | Sodium | ICP-OES | 1.0–1.5% | Ash | Gravimetric, furnace | ≤4.0% | Fat | Solvent extraction | ≤1.5% | Moisture | Loss on drying | ≤6.0% | Identification | Protein pattern | Conforms to the reference | Particle size | Sieve | ≥95% through 80 mesh The sodium line is often left off a generic protein certificate, yet it is what shows the powder is the sodium salt rather than the calcium salt or a micellar grade. Contaminants and microbiology · sodium caseinate, catalogue limits | Parameter | Method | Release limit | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Total plate count | Plate count | ≤1,000 cfu/g | Yeast and mould | Plate count | ≤100 cfu/g | E. coli | Enrichment | Absent | Salmonella | Enrichment | Absent The method column is not decoration: a sodium result without ICP-OES beside it cannot be compared with one from another technique, and a plate count depends on the medium, the temperature and the time. A result without its method is a summary. ## Dry basis, the nitrogen factor and the sodium line Kjeldahl measures nitrogen and multiplies it by a factor. Milk protein uses 6.38, a factor that assumes nitrogen is about 15.7% of protein mass; the general factor of 6.25 assumes 16%. The gap looks small and is not: a 90.0% result calculated with 6.38 becomes about 88.2% if the same nitrogen is multiplied by 6.25. The factor belongs beside the figure, not in a method footnote. The basis moves the number further. This specification is on a dry basis, so the 6.0% moisture ceiling is excluded from the protein calculation. At that ceiling, 90.0% dry basis corresponds to 84.6% as-is (90.0 × 0.94), and a 20 g serving of the powder supplies about 16.9 g of protein. Dropping the basis puts a purchase order out by more than five points before analytical variation. Sodium is a separate line, not a conversion of the protein. The catalogue range is 1.0–1.5%, measured by ICP-OES, and it is the figure that proves the salt. At 1.2% sodium, a 20 g serving carries about 240 mg of sodium; at the top of the range it carries 300 mg. ## Catalogue limit, release limit and lot result Three statements are easy to mix up. The catalogue limit is the window this grade is sold inside; the release limit is the narrower one agreed for a customer or a market; the lot result is the measurement. The first two are promises, and only the third is evidence. What the result column should contain | Parameter | Catalogue limit | Result column | Protein | ≥90.0% dry basis | A measured percentage with the factor, basis and moisture | Sodium | 1.0–1.5% | A measured percentage by ICP-OES | Ash | ≤4.0% | A measured percentage, read beside the sodium figure | Moisture | ≤6.0% | A measured percentage | Microbiology | Counts and absence | The count and the absence statement for the lot | Particle size | ≥95% through 80 mesh | The measured percentage through the sieve “Conforms” is a conclusion, not a measurement. The reader should be able to reach it from the numbers and their methods. A certificate that repeats the specification in the result column has told the buyer nothing about the lot. ## What moves between lots Sodium caseinate starts with acid casein, and the casein starts with skim milk. Feed, stage of lactation and season move the protein and the mineral content of the milk, and the neutralisation and washing steps can only narrow that variation. A lot that drifts to the top of the sodium range usually does so because more alkali was bound, not because sodium was added as salt. Drying decides the moisture, the colour and the way the powder wets. A hot inlet produces a free-flowing powder that wets slowly; a gentler dry leaves more moisture and disperses more easily. The mill and the sieve then set the particle-size result, so the 80 mesh figure can move while the protein chemistry stays put. Trends matter more than a single result near an edge. Protein drifting low while ash climbs can point to a different casein wash; sodium climbing while protein stays steady can point to a neutralisation change. The lot code on the certificate should be the one printed on the pouch, the drum and the retained-sample label. ## When an outside laboratory earns its fee Independent testing is worth it for a new source, a first shipment into a regulated market, a form the certificate does not prove, or a disputed result. The panel should answer the open question rather than repeat the sheet: protein by Kjeldahl at a second laboratory, sodium, calcium and phosphorus by ICP-OES, an amino acid profile, SDS-PAGE for the protein pattern, lactose by HPLC, a melamine and cyanuric acid screen, and the microbiological set on the same sample. A milk-protein ELISA confirms that the material is milk-derived; it does not separate sodium caseinate from calcium caseinate or from micellar casein, because all three are milk protein. The salt question is answered by the mineral panel. The methods section explains what each technique proves, and the quality page describes how the sample and the lot record are kept. ## What to compare between suppliers Compare six lines: protein with its factor and basis; sodium and ash with methods; fat and moisture; particle size plus a dispersion result; the allergen statement; and the site and lot traceability. Offers that match at 90% protein but differ on sodium, ash or moisture are not the same powder. The record is the second test. Ask which site ran the lot, which casein batch went in, which neutralisation and drying steps were used, and which retained sample is held. A certificate can be accurate and still describe a lot other than the one that arrives. The catalogue specification is on the sodium caseinate product page; the tests that separate the salt forms are on the identity page; the market rules are on the compliance page; and the calcium caseinate page gives the other side of the salt comparison. ### 02 Sodium caseinate grades: powder form, protein and sodium URL: https://nutrition.rainwoodbio.com/products/protein-collagen/sodium-caseinate/grades/ Reviewed: 2026-11-20 Sodium caseinate is sold as one ingredient name but in more than one powder form. The protein window is similar across the range — at least 90.0% on a dry basis — and the choice is usually the physical form, the flow and the way the powder wets and disperses. The grade decision is therefore made on the mixer and the pack, not only on the certificate. In one lineThe grade is the powder form plus the protein-and-sodium window, not the protein figure alone; form, flow and dispersion decide how the same 90% caseinate behaves in a mixer. ## Why sodium caseinate comes in grades Sodium caseinate is made by neutralising acid casein with sodium hydroxide and spray-drying the solution. The chemistry is the same across the range; what changes is the drying and the finishing. A standard spray-dried powder is milled to 80 mesh. An instantized or agglomerated version is built from larger, porous particles that wet faster and throw less dust. Both are sodium caseinate, and both read the same protein on a dry basis. The grade matters because the powder is often the limiting step in a filling line. A fine 80 mesh powder disperses well once it is in the mixer, but it can dust, bridge in a hopper and float on the surface of water. An agglomerated powder wets more evenly and fills a sachet at a different bulk density. Neither is a better material in the abstract; each suits a different plant. ## The two powder forms side by side Sodium caseinate powder forms · what changes | Point | Standard 80 mesh | Instantized / agglomerated | Particle size | ≥95% through 80 mesh | Larger agglomerates; sieve profile agreed | Bulk density | Higher | Lower; more air between particles | Dust | More fines | Less dust | Wetting | Slower; can float | Faster; sinks and wets | Dispersion | Good with shear | Good with less shear | Filling | Less volume per gram | More volume per gram | Typical use | General powder and bar use | Stick packs and hand-mixed drinks The table gives directions, not a specification. Agglomeration changes the particle size, the bulk density and the wettability; it does not change the protein, the sodium or the allergen. If the filling line is already set for an 80 mesh powder, an instantized grade can need a new fill weight and a new line trial. ## What changes in the drum and in the mixer Sodium caseinate is freely soluble in water and gives a slightly turbid solution. That solubility is the reason it is chosen over micellar casein in a drink: it hydrates without the swelling and thickening that a micellar powder brings. The solution is still not clear, and a formulation that needs a transparent drink has to test the powder in the real matrix rather than assume clarity from the word “soluble”. Viscosity is the practical limit. A higher solids load thickens the mix, and the effect depends on the protein concentration, the temperature and the shear. A powder that disperses easily at 5% can still be difficult at 15%, and the grade does not change that curve. Trial the load that will be sold, at the process temperature, before the specification is fixed. The 80 mesh figure is a sieve pass, not a mean particle size. Two lots can both pass 80 mesh and behave differently because one carries more fines. When flow or dust is the problem, ask for the sieve profile and the bulk density, not only the pass statement. The particle-size glossary entry explains the convention. ## How much the formula can carry A 90.0% dry-basis figure at the 6.0% moisture ceiling works out to about 84.6% protein as weighed. A 20 g serving supplies about 16.9 g of protein and, at 1.0–1.5% sodium, between 200 and 300 mg of sodium. A 30 g serving supplies about 25.4 g of protein and 300–450 mg of sodium. Those figures are arithmetic, not a recommendation, and they belong on the label before the dosage form is fixed. A powder stick is the simplest format: the consumer adds water, so the ingredient sees no heat process and no long hold in solution. A ready-to-drink product is harder. The caseinate has to survive homogenisation and the heat step, and the viscosity has to stay inside the filling window. A bar is a third case: water activity rather than solubility decides the texture, and the protein can firm over shelf life. A capsule or tablet takes the powder at 80 mesh with a fill weight sized on the protein and the sodium. Tableting can be difficult at high caseinate loads because the powder is cohesive; a granulated or instantized grade may flow better, but it changes the fill weight. Trial the dosage form before the specification is agreed. ## What to write into the specification The form belongs in the first line, and the protein basis belongs beside the protein figure. A specification that says only “sodium caseinate” leaves the powder form, the mesh and the sodium window open. - Product: sodium caseinate, CAS 9005-46-3, made by neutralising acid casein with sodium hydroxide. - Protein: ≥90.0% on a dry basis, Kjeldahl with N × 6.38, factor and basis printed. - Mineral: sodium 1.0–1.5% by ICP-OES; ash ≤4.0%. - Composition: fat ≤1.5%; moisture ≤6.0%. - Physical: ≥95% through 80 mesh, or the agreed agglomerated profile; bulk density stated. - Allergen: milk declared on the specification and the COA. - Contaminants and microbiology: the limits on the COA page. ## When a different casein is the better choice Calcium caseinate is the alternative when the formula can take calcium instead of sodium, or when a colloidal dispersion and a different heat behaviour suit the process. It is a different salt, not a drop-in: the mineral line, the solubility and the label name all change. The comparison is set out on the sodium versus calcium caseinate page. Micellar casein is the choice when the formula wants body and a lower mineral load, and when the plant has the shear and the time to hydrate it. Whey protein is a different protein with a different amino acid pattern and a different label. None of these should be selected on the protein percentage alone; the form, the cation and the process all move together. One grade across a product line is usually worth more than a separate optimisation for each SKU. A second powder form means a second specification, a second fill trial and a second line on the label. The catalogue specification is on the sodium caseinate product page; the release tests are on the COA page; the market rules for the label are on the compliance page; the other salt is on the calcium caseinate page; the methods section explains the protein and mineral tests; and the quality page describes release. ### 02.1 Sodium caseinate vs calcium caseinate: the mineral load and the label URL: https://nutrition.rainwoodbio.com/products/protein-collagen/sodium-caseinate/grades/sodium-caseinate-vs-calcium-caseinate/ Reviewed: 2026-11-20 Sodium caseinate and calcium caseinate are the same casein neutralised with a different base. The protein is the same, at least 90.0% on a dry basis, but the cation changes the ash, the solubility, the behaviour in acid and heat, and the mineral the label has to declare. The switch is a formulation and label decision, not a like-for-like substitution. In one lineSodium and calcium caseinate carry the same casein with a different cation, so the switch moves the mineral load, the solubility and the label declaration together. ## One protein, two salts Both products start with acid casein. Skim milk is acidified to about pH 4.6, where the casein precipitates; the curd is washed and dried to acid casein. That intermediate is then neutralised — with sodium hydroxide for sodium caseinate, calcium hydroxide for calcium caseinate — and spray-dried. The cation used in the neutralisation is the cation that stays in the powder. The two are separate materials with separate CAS numbers: sodium caseinate 9005-46-3 and calcium caseinate 9005-43-0. A certificate that says only “caseinate” has not named the salt, and a purchase order that says only “caseinate” has not specified one. The process is the ingredient name, and the label has to follow it. ## The mineral load side by side Sodium caseinate and calcium caseinate · what the cation changes | Point | Sodium caseinate | Calcium caseinate | CAS number | 9005-46-3 | 9005-43-0 | Neutralising base | Sodium hydroxide | Calcium hydroxide | Protein (dry basis) | ≥90.0% | ≥90.0% | Cation in the powder | Sodium 1.0–1.5% | Calcium 1.0–1.5% | Ash | ≤4.0% | ≤4.0% | In water | Freely soluble; slightly turbid | Dispersible; opaque, slightly viscous | Label contribution | Sodium, then salt in the EU | Calcium The ash ceilings are the same, but the composition behind them differs. The cation is the part that moves the nutrition panel, and it is the first line to check when a form is in doubt. The two salts are compared from the specification side on the grades page. ## The protein figure does not separate them Both salts are specified at 90.0% protein on a dry basis by Kjeldahl with N × 6.38. At the 6.0% moisture ceiling, that is about 84.6% protein as weighed, and a 20 g serving supplies about 16.9 g of protein. The cation does not change the protein calculation; it changes the ash and the mineral line beside it. The mass balance makes the point. A 20 g serving of sodium caseinate at 1.2% sodium carries about 240 mg of sodium; the same serving of calcium caseinate at 1.2% calcium carries about 240 mg of calcium. The protein is identical, the mineral is not. A buyer who compares only the protein percentage is comparing the part that the two products share. Nor is calcium caseinate a calcium supplement. At 1.0–1.5% calcium, a 20 g serving supplies 200–300 mg, which is 15–23% of the US Daily Value of 1,300 mg. That is a real contribution to the label and to the formula, but it is not a stand-alone mineral dose and should not be presented as one. ## Solubility is the visible difference Sodium caseinate dissolves in water and gives a slightly turbid solution. It is the salt to start with when the formula needs a high solids load in a neutral drink, when the protein has to hydrate without a long hold, or when the caseinate is acting as an emulsifier. The solution is not clear, so a transparent drink still needs a trial rather than an assumption. Calcium caseinate disperses rather than dissolving. The dispersion is opaque and slightly viscous, and it behaves differently from the sodium salt in a mixer and in a heat process. It is used where a colloidal body is wanted, where the calcium contribution is useful, or where the sodium load has to come down. The two are not interchangeable at the same solids load without a trial. Both salts are casein, and both aggregate near pH 4.6, the isoelectric point. An acidified drink needs a stabiliser and a trial whichever salt is used. The cation changes the rate and the texture, not the fundamental pH behaviour. The methods section explains the dispersion and mineral tests that separate the two in a dispute. ## What the label has to say The ingredient declaration names the salt: sodium caseinate or calcium caseinate. The two names are not interchangeable, and a pack cannot use one while the drum contains the other. Milk has to be emphasised as the allergen in the EU and the UK and declared as a major allergen in the US, whichever salt is used; the cation does not change the milk status. The mineral declaration is where the switch shows. In the EU, the mandatory nutrient is salt, calculated as sodium × 2.5: a 20 g serving at 1.0–1.5% sodium carries 500–750 mg of salt. In the US, sodium appears in mg and as a percentage of the 2,300 mg Daily Value, which is 9–13% for that serving. Calcium caseinate shifts the contribution to calcium: 200–300 mg per 20 g, or 15–23% of the 1,300 mg Daily Value. “Dairy-free” is not available for either salt, because both are milk protein. A low lactose figure does not change that. Protein claims are assessed on the finished product: in the EU, “source of protein” needs 12% of the energy from protein and “high protein” 20%; in the US, the thresholds are 10% and 20% of the Daily Value. The compliance page sets out the market rules. ## When to choose which Choose sodium caseinate when solubility and a high solids load matter, when the formula can carry the sodium, and when the label names the sodium salt. Choose calcium caseinate when the calcium contribution is useful, when the sodium load has to come down, or when a colloidal dispersion suits the texture. Neither choice should be made on the protein percentage, because that line is the same. A switch needs four checks before the order: the specification and CAS number, the mineral line, the trial in the real matrix, and the label artwork. The powder form, the particle size and the allergen statement should be confirmed at the same time. The catalogue specification for this salt is on the sodium caseinate product page; the other salt is on the calcium caseinate page; the release tests are on the COA page; the identity tests are on the identity page; and the quality page describes release. ### 03 Sodium caseinate stability: moisture, heat and the pack URL: https://nutrition.rainwoodbio.com/products/protein-collagen/sodium-caseinate/stability/ Reviewed: 2026-11-20 Sodium caseinate is a spray-dried milk protein and it keeps well when the powder stays sealed and dry. Moisture is the main storage variable: it causes caking, lifts the moisture figure and drives browning when reducing sugars are present. Heat accelerates those changes, and a solution adds acid, heat and microbial risk that the powder does not have. In one lineMoisture and heat are the storage variables that matter for sodium caseinate; the pack and the matrix decide the shelf life, and the protein figure alone will not show the damage. ## The powder: moisture, caking and colour The catalogue sets moisture at ≤6.0%. That figure is a release gate, not a storage allowance. Once a foil pouch is opened, the powder picks up moisture from the air, the particles stick and the flow drops. A caked powder can still pass the protein figure while failing the filling line, which is why moisture is checked at release and again after storage. Browning is the second signal. Residual lactose and other reducing sugars in the powder can react with the protein when moisture and heat are present. A cream powder that turns tan in a warm store has started to react; the protein result may barely move, but the colour, the flavour and the solubility have. A cool, dry store and a sealed pack slow the reaction. Light is a lesser factor for the dry powder than for a sensitive vitamin, but it is not irrelevant. An opaque or foil pack is the standard, and a clear jar on a bench is not a storage container. The pack should be closed after each use and the remainder used within the stated in-use period. ## The solution: pH, heat and holding time Sodium caseinate dissolves in water and gives a slightly turbid solution. At neutral pH the solution is stable enough for a normal process, but the protein is still sensitive to the conditions around it. Near pH 4.6, the isoelectric point of casein, the protein aggregates and the drink separates. An acidified formula needs a stabiliser and a trial, whatever the grade. Heat is the second variable. A pasteurisation or hot-fill step raises the viscosity and can push a marginal mix out of its filling window. Holding a caseinate solution warm for hours adds microbial risk and gives any reducing sugar time to react. The hold time should be validated, not assumed, and the validation belongs to the matrix rather than to the powder. Dissolved oxygen and metal ions matter less than in a fat-rich system, because the fat ceiling is 1.5%, but they are not absent. Iron and copper contact can discolour a dairy solution, and a long hold in a bright tank can change the colour. A sealed, stainless, dark process is easier to defend than a clear vessel on a warm day. ## What drives degradation Factors that move sodium caseinate during storage | Factor | What it does | Control | Moisture | Caking; higher moisture; Maillard browning | Sealed pack; dry store; desiccant where needed | Heat | Accelerates browning and viscosity change | Cool store; controlled process temperature | Reducing sugars | Maillard reaction with the protein | Keep the matrix low in reducing sugars; check the colour | pH | Aggregation near pH 4.6 in solution | Buffer or stabilise; trial the acid step | Oxygen | Colour and flavour change over long storage | Low headspace; sealed pack; avoid long holds | Metal ions | Discolouration in solution | Avoid iron and copper contact These factors interact. A warm, humid store with an open pouch is worse than either condition alone, and a sweetened drink held warm combines moisture, heat and reducing sugar in one vessel. ## A stability protocol for the ingredient Set the protocol around the pack: define the storage condition, the time points and the test panel. Warehouse conditions are covered by 25 °C/60% relative humidity long-term and 30 °C/65% relative humidity intermediate; 40 °C/75% relative humidity is the accelerated arm. A light-exposure arm is optional for this powder but useful when the pack is clear. Test protein, moisture, fat, ash, sodium, appearance, colour and dispersion at each point, with the microbiological set. For a drink or a stick pack, repeat the work in the matrix and at the process pH and heat load. The report should give the individual results for the pack and lot family, not a single pass statement. Request the summary for the exact pack on the order. Headspace and opening history differ between the 25 kg drum and the 1 kg pouch, so data from one does not describe the other. ## The finished formula changes the answer A stick pack usually fails at the seal. A pinhole in the foil lets moisture in, and the powder cakes at the top of the stick while the rest of the strip looks sound. The seal is inspected as well as the powder, and the pack is stored flat rather than folded. A bar is a moisture-migration problem. The caseinate can firm as water moves between phases, and the colour can drift if reducing sugars are present. A ready-to-drink product combines pH, heat and a long hold, so its shelf life has to be measured in the drink. A capsule or tablet is drier, but the shell and the excipients can still move moisture into the fill. ## How the shelf life is set No single shelf-life figure is published for sodium caseinate, because storage condition and pack set it. The retest period is written on the specification and backed by the stability file for that pack. A number quoted without pack, condition and test panel is not a shelf life. Re-assay the retained sample at the end of the retest period before any extension. Do not assume an extension, and do not apply a bulk result to a repacked container. The product hub lists the standard packs; release tests are on the COA page; pack and lead time are on the MOQ page; the methods section explains the tests; and the quality page covers the retained-sample system. ### 04 Sodium caseinate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/protein-collagen/sodium-caseinate/moq/ Reviewed: 2026-11-20 The minimum order for sodium caseinate is 1 kg, packed as a 1 kg foil pouch, and the production pack is a 25 kg fiber drum. Standard packs are quoted at 1–7 days from confirmation. To quote and schedule an order, we need the salt form, the specification, the quantity and pack, the destination and Incoterm, the document set, and the intended use and market. In one lineThe 1 kg pouch is the qualification unit: it carries a lot code, supports a bench trial and an independent check, and the 25 kg drum is the production unit. ## Why the minimum is 1 kg One kilogram covers a bench trial, a retained sample and an independent mineral check. It also travels as a parcel, so a formulator can test the powder before a production slot is booked. The pouch is a traceable commercial unit, not a scoop from a drum. A smaller trial quantity has to be split from a larger lot and repacked, which adds handling and breaks the original pack identity. The 25 kg drum lowers handling per kilogram but ties up inventory for longer. The minimum is set by the pack, not by order size. ## Packs and formats Standard sodium caseinate packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Instantized / agglomerated | On request | Stick packs, hand-mixed drinks | Particle profile and bulk density change | Split pack | On request | Bench trial below 1 kg | Repacked from a bulk lot; own handling record The catalogue form is an 80 mesh powder: ≥95% through 80 mesh. Agglomeration changes the particle size and bulk density, so it is a specification change, not a packing option. If the line needs faster wetting or less dust, ask before the quotation; the change moves the particle-size line and may move the lead time. ## Lead time and dispatch Standard packs are quoted at 1–7 days from order confirmation, which covers picking, documents and dispatch. Transit, customs and the customer's own release sit outside that window. An instantized grade or a split pack needs its own lead time, stated separately on the quotation. Get the dispatch date in writing rather than relying on the range. The pouch usually ships as a parcel and the drum on a pallet, and the Incoterm decides who books freight and clears entry. Lot documents should travel with the consignment, not follow it. ## What a quotation needs Six details make quotations comparable: - Product and salt. Sodium caseinate, CAS 9005-46-3, not “caseinate” or “casein”. - Specification. Protein factor and basis, sodium, ash, fat, moisture, particle size, heavy metals and microbiology. - Quantity and pack. 1 kg pouch, 25 kg drum, or an instantized or split variant. - Destination and Incoterm. The country and the port or delivery address, plus the trade term. - Documents. COA, specification, SDS, allergen statement, plus any declaration the importer needs for the market. - Intended use and market. Whether the use is a supplement, a food or something else, and the country of sale. Without the market and the salt form, the quotation is incomplete. The same powder can fit one destination and sit outside the file for another, and the paperwork is part of the offer. Commercial terms stay on the quotation, not on this page. ## The sample is a lot, not a demonstration The 1 kg pouch is the qualification lot. Test identity, protein, sodium, ash, moisture and microbiology before scaling, and retain a sample from that pack. The lot code should agree across the sample, the COA and the quotation; without that link it is only a demonstration. A sub-kilogram bench trial comes from a repack, not from the catalogue pouch. It leaves its bulk lot, carries its own handling record and should not be described as the 1 kg foil pack. Request the split in writing and file the lot code with the trial data. Bench material and production material can come from different lots even when both meet the same specification. ## Terms to settle before the first order Put the commercial and quality terms on one page: Incoterm, pack, dispatch window, specification revision, one COA per lot, retained sample, retest period and the change route. A quality agreement signed before the first production order is easier than the same conversation after a dispute. When a lot misses the agreed specification, the evidence is the retained sample and a joint re-test on the named method, not a photograph. The quality agreement should name the referee laboratory and the party responsible for it. Appearance alone is a weak basis for a return, on either side. The catalogue ranges are on the sodium caseinate product page, with the release lines on the COA page and the market files on the compliance page. The MOQ glossary entry defines the term, the logistics page covers freight and documents, and the quality page describes the release file. ### 05 The regulatory file for sodium caseinate URL: https://nutrition.rainwoodbio.com/products/protein-collagen/sodium-caseinate/compliance/ Reviewed: 2026-11-20 Sodium caseinate is a milk protein with a long history of food use, so the permission to sell it is rarely the hard part. The file has to carry the milk allergen declaration, the sodium figure on the nutrition panel, the contaminant results for the product as sold, and the wording of any protein claim. The destination route and the finished-product status are confirmed by the buyer's regulatory team. In one lineThe permission is rarely the question for sodium caseinate; the milk allergen, the sodium declaration, the contaminant limits and the claim wording are what the file has to carry. ## The four checks in the file First, the material must be a permitted food ingredient in the destination. Second, any caseinate is a milk protein and triggers an allergen declaration. Third, the contaminant result is converted from powder to finished product. Fourth, the label and claim wording must match the form, dose and market. Ownership is split as well. Ingredient status sits with the supplier and importer, the allergen with the recipe and label, the limit with the food category, and the claim with the brand. Three answers out of four leave a hole, usually the allergen because the powder is “just protein”. The specification revision, COA, allergen statement and label artwork should also be dated and cross-referenced. ## European Union Caseinates have a long history of food use in the EU and are not, as far as this review can establish, a novel food; the current novel food catalogue should still be checked before a new source is launched. Sodium caseinate is a food ingredient rather than a food additive, and it carries no E number. Regulation (EU) No 1169/2011 governs allergen labelling. Milk and products thereof, including lactose, are on Annex II, so “milk” has to appear in the ingredient list and be emphasised. The nutrition declaration is mandatory and includes salt, calculated as sodium × 2.5; a sodium figure of 1.0–1.5% becomes 2.5–3.75% salt on a powder basis. Directive 2002/46/EC harmonises the vitamin and mineral lists for food supplements but leaves other ingredients, proteins included, to national rules. Contaminant limits sit in Regulation (EU) 2023/915, and claims in Regulation (EC) No 1924/2006. Framework references are collected in the EU regulatory notes. ## United States Sodium caseinate is generally recognised as safe as a multiple-purpose food substance under 21 CFR 182.1748, used in accordance with good manufacturing practice. A dietary supplement facility has to meet 21 CFR 111, and the label has to meet the supplement labelling rules. The supplier states the basis for the intended use; the buyer files it. Milk is a major food allergen under FALCPA, so the product must declare it in the ingredient list, in a “Contains” statement, or both. The declaration follows the protein, not the lactose figure, so a low-lactose caseinate is still a milk-containing ingredient. The sodium line appears in the Nutrition Facts or Supplement Facts panel, in mg and as a percentage of the 2,300 mg Daily Value. A protein claim is a nutrient content claim: 21 CFR 101.54 sets “good source” at 10% or more of the Daily Value per serving and “excellent source” at 20% or more, against a 50 g protein Daily Value. Lead may also bring California Proposition 65 into play on a daily-intake basis. ## Contaminants and the finished-product calculation Contaminants are a finished-product calculation, not only a drum result; the destination text and daily dose decide the final limit. Contaminant limits to confirm for a sodium caseinate supplement | Element | EU supplement reference | US position | UK position | Lead (Pb) | 3.0 mg/kg | No federal supplement limit; state rules apply | Retained GB limit; check the current text | Cadmium (Cd) | 1.0 mg/kg | No federal supplement limit | Retained GB limit; check the current text | Mercury (Hg) | 0.10 mg/kg | No federal supplement limit | Retained GB limit; check the current text | Arsenic (As) | Not harmonised; member-state rules may apply | No federal supplement limit | Check the current GB text Those EU values are set by Regulation (EU) 2023/915 for supplements as sold, as of this review. A caseinate sold as an ingredient is assessed against the limit for the food category it enters. Arsenic is not harmonised at EU level, so the specification states the limit it is tested against; the catalogue sets it as a customer limit. ## The label: the salt name, milk and sodium The ingredient name has to be the salt in the drum. “Sodium caseinate” is this product; “caseinate” or “casein” does not identify the cation. Milk must be emphasised as the allergen in the EU and the UK and declared as a major allergen in the US. The sodium follows the powder into the serving. At 1.0–1.5% sodium, a 20 g serving carries 200–300 mg of sodium, which is 500–750 mg of salt in the EU calculation and 9–13% of the US Daily Value; a 30 g serving carries 300–450 mg. Calculate from the measured lot, not from the catalogue midpoint. “Dairy-free” and “lactose-free” are separate claims with their own basis; neither is available automatically for a milk protein. The finished product's wording belongs to the brand and the market. ## Claims and wording A disease claim is not available in any market this site supplies. Protein claims are a separate regime: the EU requires 12% of energy from protein for “source of protein” and 20% for “high protein”; the US uses 10% and 20% of the Daily Value; the UK applies the retained EU conditions. Confirm whether the destination assesses a supplement per daily portion or per 100 g before the label is set. Sodium claims are a separate review. A “low sodium” claim has its own threshold in each market, and a protein powder at 1.0–1.5% sodium is unlikely to meet it at a normal serving, though the finished product decides. ## Documents for the file - Specification with the revision, the salt form, the protein factor and the dry basis. - Batch COA with results and methods, including sodium by ICP-OES and the allergen statement. - SDS, TDS and the animal-origin and BSE/TSE statement. - Site certificates — GMP, HACCP or ISO — for the plant that made the lot. - Origin declaration, non-GMO statement and halal or kosher certificates where the market asks. - Label artwork and claim substantiation for the finished product. The COA structure is set out on the COA page; the mineral tests are described in the ICP-OES method note; the catalogue specification is on the sodium caseinate product page; and the quality page describes how the release file is kept. ## Checklist before the first order - Is the salt named on the specification and on the ingredient list? - Is milk declared, with no dairy-free wording on the pack? - Is sodium converted to salt for the EU and to mg and %DV for the US? - Are the contaminant results inside the destination limit for the product as sold? - Does the protein claim use the protein as consumed, with the factor and basis declared? - Do the COA, specification and label artwork carry one revision? The US and UK market notes sit beside the EU summary; the other salt is on the calcium caseinate page. ### 06 How to prove a lot is sodium caseinate URL: https://nutrition.rainwoodbio.com/products/protein-collagen/sodium-caseinate/identity/ Reviewed: 2026-11-20 Four measurements, read together, identify a sodium caseinate lot: the document names the salt and the CAS number, the protein pattern shows casein, the sodium figure shows the sodium salt, and the ash and moisture close the mass balance. No single line does it. A protein figure of 90% is consistent with sodium caseinate, calcium caseinate and micellar casein, so the cation is the deciding measurement. In one lineA sodium caseinate lot is the sodium salt when the protein pattern, the sodium figure and the ash agree: the protein says casein, the sodium says which caseinate, and the ash shows the mineral load. ## The four identity layers A certificate can carry the right name and still leave the powder unproven. The four layers below ask separate questions and each needs its own evidence. A supplier who answers only the first has described the paperwork, not the drum. Four layers of sodium caseinate identity | Layer | Question | Test | What it proves | Document | Is the salt named? | Name, CAS number, specification | Paperwork and traceability | Protein | Is the protein casein? | SDS-PAGE and amino acid profile | The protein family | Counter-ion | Is it the sodium salt? | Sodium and calcium by ICP-OES | The cation | Mass balance | Is it diluted or boosted? | Protein, ash, moisture, lactose | Consistency of the numbers The fourth layer is the one that catches a blend. A powder made from sodium caseinate and a nitrogen-rich filler can be formulated to land inside the protein range, but the ash, the sodium or the amino acid profile moves. The numbers have to be read together. ## The sodium ratio: proving the salt The catalogue range is 1.0–1.5% sodium, which is 0.43–0.65 mmol of sodium per gram of powder. Calcium caseinate at 1.0–1.5% calcium carries 0.25–0.37 mmol of calcium per gram, or 0.50–0.75 meq, because calcium is divalent. The two salts neutralise a similar charge with a different mass of cation, which is why the sodium and calcium figures separate them while the protein figure does not. Sodium by ICP-OES is the direct test. A result inside 1.0–1.5%, with protein at 90.0% dry basis and ash at 4.0% or below, is consistent with the sodium salt. A sodium result near zero with a normal ash points to calcium caseinate or micellar casein; a sodium result above 1.5% with ash above 4.0% points to added sodium salt or a different neutralisation. A high sodium with low protein points to a diluent. The protein-to-sodium ratio is a useful screen, not a specification: at 90% protein and 1.2% sodium the ratio is about 75 to one, and it falls as sodium rises. It catches a blend that has been balanced on protein alone. The ICP-OES method note explains the digestion and the reporting limits. ## X-ray diffraction and the solid state X-ray diffraction is the wrong tool for proving the salt form of caseinate, and it is worth saying so. Casein is amorphous: a diffractogram shows a broad halo and no crystalline peaks, so XRD cannot separate sodium caseinate from calcium caseinate or from micellar casein. A laboratory that offers an XRD identity test for caseinate is selling a pattern that will look the same for all three. XRD is still useful for a different question: whether a crystalline solid has been added. Lactose, melamine, a mineral salt or a crystalline diluent can produce peaks in an otherwise amorphous powder. That makes XRD a screen for adulteration rather than a release test for identity. FTIR is more informative about the protein but still not form-specific: the amide bands show that the material is protein, not which cation is bound. The practical analytical set is the mineral panel plus the protein pattern plus the mass balance. The XRD method note sets out what a pattern can and cannot support. ## What adulteration looks like Substitution routes for sodium caseinate and their signals | Route | What moves | Signal | Test | Calcium caseinate | Sodium down; calcium up | Sodium below 1.0%; calcium present | ICP-OES, ash | Micellar casein | Sodium down; ash lower; thicker dispersion | Sodium low; dispersion swells | Mineral panel, dispersion test | Whey protein | Amino acid pattern; lactose may rise | Protein passes; pattern differs | SDS-PAGE, amino acid profile, lactose | Plant protein | Foreign protein bands | Amino acid pattern differs | SDS-PAGE, amino acid profile | Nitrogen booster | Protein high; amino acids low | Kjeldahl and amino acid disagree | Amino acid profile, melamine screen | Sodium chloride or diluent | Sodium and ash up; protein down | Ash above 4.0%; sodium above 1.5% | ICP-OES, ash, protein mass balance The last route is the one that a sodium figure alone can miss. Sodium chloride lifts the sodium result without adding casein, and the ash rises with it. The protein figure and the amino acid profile are the check. A milk-protein ELISA confirms that the material is milk-derived, but it does not separate the caseinates, because all of them are milk protein. ## How to write identity into the specification - “Sodium caseinate, CAS 9005-46-3, made by neutralising acid casein with sodium hydroxide.” - “Protein ≥90.0% on a dry basis, Kjeldahl with N × 6.38; report the factor and the moisture.” - “Sodium 1.0–1.5% by ICP-OES; ash ≤4.0%; calcium reported beside the sodium.” - “Protein pattern by SDS-PAGE conforms to the casein reference; amino acid profile on request.” - “Moisture ≤6.0%; fat ≤1.5%; particle size ≥95% through 80 mesh.” - “Milk declared; lot number, site and retained sample identified on the COA.” The specification makes identity testable only if the methods are named. A line that says “identity conforms” without the protein pattern, the mineral method and the reference has left the form untested. ## Five questions for the supplier - Which salt is this lot, and which CAS number is on the certificate? - What are the sodium, calcium and ash figures, and by which method were they measured? - Can you supply the SDS-PAGE pattern and the amino acid profile, not only the protein percentage? - What is the moisture, and how was the dry-basis protein calculated? - On a disputed lot, would you accept a joint re-test against the retained sample? Those five answers make an identity file; one protein percentage does not. The catalogue specification is on the sodium caseinate product page; the release tests are on the COA page; the powder forms are compared on the grades page; the other salt is on the calcium caseinate page; the methods section explains the techniques; and the quality page describes the release file. ### 01 What the COA for wheat gluten actually contains URL: https://nutrition.rainwoodbio.com/products/protein-collagen/wheat-gluten/coa/ Reviewed: 2026-11-20 A wheat gluten certificate reports appearance, protein by Kjeldahl with its nitrogen factor and basis, gluten content with the method used, moisture, ash, the protein-profile identification, particle size, heavy metals and microbiology. The catalog limits are in the table below; the lot COA is the evidence that a particular pack met them. Protein and gluten are separate lines, and a certificate that prints the same number twice has not shown two measurements. In one lineProtein and gluten are two lines, not one: the nitrogen factor, the moisture correction and the gluten method decide what the percentage on the certificate actually describes. ## What the certificate has to show A certificate earns its place when a reviewer can rebuild the release decision from the page. Every line should carry the parameter, the method behind the number and the limit used for release. A row that gives only “conforms” offers a verdict with no evidence. The identification line and the protein line answer different questions. Identification says the powder has the protein profile of wheat gluten; the protein figure says how much nitrogen-rich material is present. Release parameters for wheat gluten | Parameter | Method | Release limit | Appearance | Visual | Off-white to cream powder | Identification | Protein profile by SDS-PAGE or HPLC | Conforms to the reference | Protein | Kjeldahl, N × 5.7, dry basis | ≥75.0% | Gluten content | Named washing or protein-based method | ≥75.0% | Moisture | Loss on drying | ≤8.0% | Ash | Gravimetric | ≤1.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh ## Dry basis, the nitrogen factor and the gluten method Kjeldahl digestion converts nitrogen to ammonia and measures it; the protein figure is that nitrogen multiplied by a factor. The catalog uses 5.7 and states the dry basis, so both conventions are fixed on the certificate. Codex Standard 163-1987, the reference for wheat protein products including wheat gluten, uses a factor of 6.25 and a minimum of 80% for wheat gluten. The same catalog figure restated with the Codex factor is 75.0 × 6.25 ÷ 5.7 = about 82.2%, which is the number to quote when a customer's specification follows that standard. The moisture correction is the second arithmetic step. A lot measured at 78.0% protein as received, with 7.0% moisture, is 78.0 ÷ 0.93 = 83.9% on the dry basis. Run the other way, 75.0% dry basis at the 8.0% moisture limit is 75.0 × 0.92 = 69.0% as received. A 75.0% figure without its basis could describe either powder. The gluten line needs its own method. A washing method recovers the water-insoluble gluten mass; a gluten-index test adds a centrifugation step; a protein-based calculation derives gluten from nitrogen. The three are not interchangeable, and the catalog's ≥75.0% has to say which one it means and whether the result is dry or as received. ## The limit and the measured result The release limit is the acceptance boundary; the result is what the laboratory found on the lot. They belong in separate columns, with the method beside them. If the result column simply repeats the specification range, it is a copy of the limit, not evidence about the powder. What belongs in the result column | Parameter | Release limit | Result column | Protein | ≥75.0% (N × 5.7, dry basis) | A measured percentage, with the factor and the moisture result | Gluten content | ≥75.0% | A measured percentage, with the method and the basis | Moisture | ≤8.0% | A measured percentage | Ash | ≤1.0% | A measured percentage | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot “Passes specification” should be a conclusion the reader can reach from the numbers. For heavy metals that means a figure per element, not a total that hides the one element close to its limit. For microbiology it means a count plus an absence statement. For gluten it means the method, because a percentage without a method cannot be compared with another supplier's certificate. ## What changes from lot to lot Wheat source and crop year set the starting protein, the gluten strength and the ash. Milling and air classification move the particle size and can concentrate protein; drying moves the moisture and, if the heat is excessive, the vitality of the gluten. A new crop year is a change of raw material even when the specification is unchanged, and it belongs in the supplier's change-control record. Colour is a coarse signal. Off-white to cream covers a wide window, and a shade within it is not an identity failure. A clear darkening or a grey cast is worth a question about the drying step or the wheat source, even when protein and gluten both pass. Particle size moves with the mill and the sieve, so the 80 mesh result can change without any change in the chemistry. Across lots, direction matters more than a single result: protein drifting toward the floor, moisture climbing with the season, or ash rising after a source change. The lot code on the certificate should match the pouch, the drum and the retained sample. ## When an outside laboratory helps An independent test is worth ordering for a new source or crop year, a first shipment into a regulated market, a disputed vitality result or a gluten-free claim that depends on the finished product. The panel should target the decision rather than repeat the whole certificate. For identity, ask for Kjeldahl with the factor and the moisture, a named gluten method, a protein profile by SDS-PAGE or HPLC, ash and an ICP-MS metal panel. For a wheat-free or gluten-free statement, add a validated gliadin ELISA and report its limit of detection; a “not detected” line without a limit says more about the method than about the sample. Heat-treated and hydrolysed wheat proteins can read low in a sandwich ELISA, so the method has to be fit for the matrix. If a result is challenged, send the referee the retained sample, the certificate and the specification, and ask for the test that separates the disputed property rather than a repeat of the same assay. ## Comparing suppliers line by line Seven items belong in a side-by-side comparison: wheat source and crop year; grade, meaning vital or devitalized; protein result with factor and basis; gluten result with method; moisture and ash; particle size; and the allergen statement. The catalog specification is on the wheat gluten product page. The tests that separate gluten from starch and from other proteins are on the identity page; the grade and vitality question is on the grades page; the hydrolysed alternative is compared on the wheat protein peptides page; the protein methods are described in the methods library; and the release workflow is on the quality page. ### 02 Vital or devitalized wheat gluten: what changes when you switch URL: https://nutrition.rainwoodbio.com/products/protein-collagen/wheat-gluten/grades/ Reviewed: 2026-11-20 Wheat gluten is sold in two functional grades, vital and devitalized, and the hydrolysed product sold as wheat protein peptides is a third material. Vital gluten is dried gently enough to keep its elasticity; devitalized gluten has lost it; the peptides are soluble chains rather than an intact protein complex. The catalog material here is a wheat gluten powder at 80 mesh; the product page describes an opaque, elastic dispersion, but the catalog does not include a vitality test. The grade changes dough strength, water absorption, solubility and the label, not only the protein figure. In one lineVitality is the grade decision: drying that preserves elasticity gives a dough-functional gluten, while heat that removes it gives a protein powder with a different job. ## Why wheat gluten comes in more than one grade Wheat gluten is the protein complex left after starch and soluble material are washed out of a wheat flour dough. Its commercial value is functional as well as nutritional: when rehydrated it forms a cohesive, extensible mass that strengthens a dough and holds a bar together. That behaviour is what “vital” means, and it is a property of the drying step, not of the protein percentage. Codex Standard 163-1987 covers wheat protein products including wheat gluten. It separates vital wheat gluten, characterised by high viscoelasticity when hydrated, from devitalized wheat gluten, characterised by reduced viscoelasticity, and it sets a crude protein minimum of 80% (N × 6.25) for both. It also covers soluble wheat protein as a separate category with a lower protein minimum. The catalog line here is 75.0% by Kjeldahl with N × 5.7 on the dry basis, which restates to about 82.2% with the Codex factor. Devitalized gluten is not a failed batch. It is deliberately heat-treated to remove the elasticity that a protein-fortified snack, a blend or a system where a strong dough is not wanted does not need. The buyer who orders “wheat gluten” without naming the grade has left the most consequential property open. ## The three materials side by side Vital wheat gluten, devitalized wheat gluten and wheat protein peptides | Property | Vital wheat gluten | Devitalized wheat gluten | Wheat protein peptides | Protein (typical) | ≥75.0% (N × 5.7, dry) | ≥75.0% (N × 5.7, dry) | ≥80.0% (Kjeldahl) | Peptide content | Not specified | Not specified | ≥70.0% by HPLC | Water behaviour | Hydrates to a cohesive, elastic mass | Binds water without an elastic network | Soluble; clear to slightly turbid solution | Function in a formula | Dough strength, chew, binding | Protein fortification without dough development | Soluble protein fortification | Allergen statement | Wheat; gluten | Wheat; gluten | Wheat; gluten | Label name | Wheat gluten | Wheat gluten | Hydrolysed wheat protein | Typical use | Bakery, protein bars, blends | Fortified snacks and blends | Capsules, tablets, powder blends The table is a starting point, not a substitute for a specification. Vitality is not a single number, and two vital lots with the same protein can behave differently in a dough. A buyer who needs a functional gluten should ask for a vitality or wet-gluten test in addition to the certificate lines. ## Powder, granulation and handling The standard form is a powder with ≥95% through 80 mesh. It is a light, dusty solid that wets slowly and tends to form lumps if it is dumped into water. A granulated form is available on request: it flows better, produces less dust and disperses more evenly, at the cost of a different particle-size profile and a longer lead time. Bulk density is not on the catalog specification, so ask for it if silo, hopper or sachet-fill design depends on the figure. Colour runs from off-white to cream, and a darker or greyer shade is a question for the supplier rather than an automatic rejection. The powder is hygroscopic; a pack that is opened and folded over is not a sealed pack. ## Use level, protein contribution and the label There is no therapeutic dose for wheat gluten. The use level is a formulation decision: enough to strengthen a dough, bind a bar or reach a protein target, without making the texture rubbery or the mix too viscous. The arithmetic is what has to be right, because the label and the weigh-up must agree. A 75.0% dry-basis protein at 8.0% moisture is 69.0% protein as received. Ten grams of that powder contributes 6.9 g of protein, and 5 g contributes 3.45 g. In a 40 g bar, 10 g of gluten is a quarter of the mass; in a 1 kg flour batch, a 5% addition is 50 g. Those are arithmetic examples, not recommendations, and the formulator sets the final level in the matrix. Two label points follow. The protein contribution is calculated from the as-received figure, not from the dry-basis figure. The allergen statement is required because the source is wheat, whatever the grade and whatever the protein percentage. ## What belongs in the specification - “Wheat gluten, grade named as vital or devitalized, CAS 8002-80-0; source wheat and crop year declared.” - “Protein ≥75.0% by Kjeldahl, N × 5.7, on the dry basis; state the moisture result.” - “Gluten content ≥75.0% by the named method, with the basis.” - “Moisture ≤8.0%; ash ≤1.0%; particle size ≥95% through 80 mesh.” - “Vitality test by the agreed method, where dough function matters.” - “Allergen statement: contains wheat and gluten; gluten-free status not claimed.” - “Heavy metals and microbiology as listed; pack and lot code declared.” ## When another grade is the better choice If the formula must be gluten-free, no wheat gluten grade is suitable; the allergen and the gluten threshold are not negotiable, and the product has to be built on another protein. If the formula needs a clear solution or a high-protein drink with low viscosity, the insoluble gluten is the wrong starting point and the peptides are the practical route. If dough strength is not wanted, devitalized gluten does the protein job without the elasticity. If dough strength is the whole point, the vital grade is the one to specify. The product hub carries the catalog values; the level-four comparison takes the peptide route further; the wheat protein peptides page gives the hydrolysed specification; the COA page shows how the grade is reported; the identity page gives the tests; the methods library covers the protein work; the quality page covers release. ### 02.1 Wheat gluten vs wheat protein peptides: peptide size, function and the allergen URL: https://nutrition.rainwoodbio.com/products/protein-collagen/wheat-gluten/grades/wheat-gluten-vs-wheat-protein-peptides/ Reviewed: 2026-11-20 Wheat gluten and wheat protein peptides start from the same grain but are different ingredients. The gluten is an intact protein complex that hydrates into an elastic network; the peptides are shorter chains produced by hydrolysis, and they dissolve rather than swell. The differences that matter are peptide size, what the powder does in water and in a formula, and the allergen statement, which stays attached to the wheat source in both cases. In one lineHydrolysis shortens the peptide chain and changes what the powder does in water and in a formula, but it does not remove the wheat allergen statement. ## Peptide size: intact protein against hydrolysate Wheat gluten is a mixture of gliadin and glutenin. The gliadins are single chains of roughly 30–50 kDa; the glutenins are subunits of a wider size range linked into polymers that can be far larger. Those polymers give hydrated gluten its elasticity and gas-holding. Hydrolysis cuts peptide bonds and shortens the chains. The result is a distribution, not one molecular weight: enzyme, dose, pH, temperature and time decide how far the reaction goes, and the distribution can run from a few hundred daltons to several kilodaltons. The catalog line for wheat protein peptides is ≥70.0% peptide content by HPLC, with ≥80.0% protein by Kjeldahl. Peptide content is an operational measure of the fraction that behaves as peptide in the assay; it is not the same as a molecular-weight window. That distinction is the first question to ask. Two hydrolysates with the same peptide content can behave differently, so ask for the distribution and the method, not only the percentage. ## Function: elastic network against soluble protein Wheat gluten is dispersible in water but not soluble. It wets, hydrates and forms an opaque, cohesive mass; mixed into a dough, it adds strength, extensibility and gas-holding. In a bar or a powder blend it binds water and contributes chew. Those effects depend on the intact, high-molecular-weight fraction, which is why a devitalized gluten or a hydrolysate cannot replace it at the same weight. Wheat protein peptides dissolve in water to a clear to slightly turbid solution. They add protein without the elastic network, stay low in viscosity at useful solids and are suited to capsules, tablets and powder blends where a clear or easy-to-mix liquid is wanted. Some hydrolysates also foam or emulsify, but that depends on the specific distribution and should be measured in the matrix. The process follows the function: gluten needs hydration and mixing time, and over-mixing can toughen a bar; peptides need dispersion and a validated hold time in liquid. A swap changes the mixing step and the texture, not only the protein number. ## The allergen: the source, not the peptide size Both materials come from wheat, and wheat is a regulated allergen. In the EU, Regulation (EU) No 1169/2011 lists “cereals containing gluten” in Annex II, with wheat named, and the allergen has to be emphasised in the ingredient list. In the US, wheat is a major food allergen under FALCPA, and the label must carry a “Contains: wheat” statement or an equivalent parenthetical. Neither rule exempts a hydrolysate. Hydrolysis can reduce the size of IgE-binding epitopes, but it does not reliably remove them, and the allergen declaration is based on the source ingredient. A wheat protein peptide is still a wheat ingredient. Analytical methods add a second caution: sandwich ELISA kits can under-report hydrolysed or heavily heat-treated wheat protein, so a low result needs a method that has been validated for the matrix, not a number read across from an intact-gluten sample. Gluten-free labelling is a separate gate. In the EU, Regulation (EU) No 828/2014 allows “gluten-free” at no more than 20 mg/kg and “very low gluten” at no more than 100 mg/kg; the US rule at 21 CFR 101.91 uses a threshold below 20 ppm and excludes wheat ingredients unless they have been processed to remove gluten. A wheat gluten or wheat peptide ingredient does not meet either gate as supplied, and the finished product has to be assessed on its own. ## Telling the two materials apart analytically Protein content alone will not separate them. Both are wheat proteins with a high nitrogen figure, and a blend can be built to hit a protein target. The tests below answer different questions and belong together in a qualification file. Analytical questions for wheat gluten and wheat protein peptides | Question | Test | What it shows | Is it wheat protein? | Protein profile by SDS-PAGE or HPLC; amino acid pattern | The source family, not the degree of hydrolysis | Is it hydrolysed? | Peptide content and molecular-weight distribution by HPLC | How much of the protein is in short chains | Is it still vital? | Wet-gluten or vitality test by an agreed method | Whether the elastic network survives hydration | Is it gluten-free? | Validated gliadin ELISA with a stated detection limit | Whether the lot meets the 20 mg/kg gate | Is it diluted? | Moisture, ash, starch and mass balance | How much of the powder is not protein The catalog specification is the starting point. A peptide lot can meet the protein line and miss the peptide line; a gluten lot can meet both and still be devitalized. The certificate should report the method beside each result. ## Switching from one to the other Replacing gluten with peptides is not a weight-for-weight substitution. The protein figure changes from ≥75.0% to ≥80.0%, the powder becomes soluble, the viscosity and texture change, and the dough-strength function disappears. A bakery or bar formula built on gluten needs a new trial, not a line edit. Replacing peptides with gluten is the same problem in reverse: the dispersion becomes opaque, the gluten hydrates and settles, and the clear liquid the formulator designed is no longer clear. The allergen statement does not change in either direction; the label name does, and it must match the ingredient used. A specification revision, a trial in the real matrix and a written change control are the minimum before a switch; the compliance page covers the label side and the stability page covers the pack. ## What the label must say In the EU, the ingredient list names the material as “wheat gluten” or “hydrolysed wheat protein”, with the wheat emphasised as an allergen. In the US, the same source appears in the “Contains” statement. A protein claim on the finished food follows the nutrition-claims conditions for the market; it is a calculation on the final recipe, not a property of the ingredient. The label must not describe either material as gluten-free or wheat-free; that claim needs the finished product to meet the threshold, supported by a validated test and a review of every other ingredient and contact surface. No disease-related claim is made for either ingredient. The catalog values for the intact material are on the wheat gluten product page; the hydrolysed material is specified on the wheat protein peptides page; the grade question is set out on the grades page; the analytical methods are in the methods library; and the release workflow is on the quality page. ### 03 Wheat gluten stability: moisture, vitality and the pack URL: https://nutrition.rainwoodbio.com/products/protein-collagen/wheat-gluten/stability/ Reviewed: 2026-11-20 Wheat gluten is a hygroscopic protein powder. Moisture pick-up is the main storage risk: it cakes the powder, feeds microbial growth and can cost vitality before the protein figure moves. The catalog moisture limit is ≤8.0%, and that is a release gate rather than a storage allowance. A sealed pack, a cool dry store and a defined in-use period are part of the shelf life. In one lineMoisture is the variable that decides wheat gluten's shelf life: it cakes the powder, feeds microbial growth and, with heat, costs vitality before the protein figure moves. ## The powder: moisture, caking and vitality The powder leaves the dryer at or below the 8.0% moisture limit, and it will move toward equilibrium with the air around it. In a humid store the moisture rises; the particles stick, the bulk density changes and the powder can cake into lumps that no longer disperse. The as-received protein percentage falls as water is added, even though the dry-basis figure is unchanged. Vitality is the second loss. The elastic network depends on the protein's native structure, and a long exposure to warm, humid conditions can reduce it before any chemical test flags a problem. A lot that still passes protein and moisture but behaves short and less extensible in a dough has lost the property the grade was bought for. The pack is the barrier. The 1 kg foil pouch is the small unit; the 25 kg fiber drum depends on its inner liner. Close the liner after each use, store the drum away from a damp floor and write the opening date on the label. Once a pouch is opened and folded over, it is no longer a heat-sealed barrier, and humid air is now in the headspace. ## The dispersion: not a solution Wheat gluten does not dissolve. It wets, hydrates and forms an opaque, elastic dispersion; the viscosity rises as the protein takes up water. That is useful in a dough or a bar, but it makes a liquid format harder to hold: a slurry is a microbial growth medium, and its viscosity changes with time, temperature and mixing. If a liquid mix is unavoidable, validate the hold time, the temperature and the preservation hurdle before filling, and measure the viscosity at the start and the end of the hold. Stability data from the bulk powder cannot be read across to a slurry. Heat treatment, high shear and freeze-thaw can all change the texture, and a thawed dispersion is not the same material that was frozen. ## What moves the powder in storage Factors that move wheat gluten during storage | Factor | What it does | Control | Moisture | Caking, mould, lower as-received protein | Sealed pack; dry store; liner closed | Heat | Reduces vitality; accelerates moisture damage | Cool store; cool process | Oxygen and lipids | Residual lipids can oxidise; off-colour and off-odour | Sealed pack; stock rotation | Light | Colour fade or shift in a clear container | Opaque or foil pack; dark store | Pests | Infestation of a flour-based powder | Sealed pack; pest control; stock rotation | Compression | Hard caking in a stacked drum | Pallet stacking limits; rotate stock The factors reinforce each other: warm air holds more moisture, a damp powder cakes harder, and an open bag invites pests. The question is not whether the powder is stable, but for how long, in which pack and at which condition. ## Designing the stability protocol The protocol should fix the pack, the condition, the time points and the panel. Warehouse coverage uses 25 °C/60% RH long term and 30 °C/65% RH intermediate; 40 °C/75% RH is the accelerated arm that challenges the pack. A real-time ambient arm is what supports the actual retest period. At each point, test protein, gluten and vitality, moisture, ash, appearance and micro. For a bar or a bakery application, repeat the work in the matrix: the flour, the humectants and the process decide the rate. The report should show each result, not a single pass statement, and it should name the pack and the lot family. Ask for the summary for the pack you will buy. Headspace, opening history and surface-to-volume ratio differ between the pouch and the drum, so the data is pack-specific. ## The finished formula changes the result A protein bar is a moisture-management system. The gluten binds water and contributes chew, but the bar's water activity, its humectants and its other proteins decide whether that texture survives months on a shelf. Measure hardness and moisture at intervals, not only at release; a bar that hardens is a formula problem even when the gluten lot was released correctly. In bakery, the added gluten works alongside the flour proteins. The test bake is the evidence: water absorption, dough handling and loaf volume belong in the trial, and the same lot can behave differently in two flour streams. In a powder blend, moisture migration from other ingredients and segregation during filling are the risks; a granulated gluten reduces dust and segregation but changes the particle-size specification. ## How the retest period is assigned Wheat gluten has no single catalog shelf life: the pack and the storage condition decide it. The retest period set on the specification is backed by stability data run in that pack. A figure quoted without a pack, a condition and a panel is not a shelf life. At the end of the retest period, re-test the retained sample before adding time. Never extend on assumption, and never transfer a bulk figure to a container you have repacked. The product hub lists packs; release tests are on the COA page; pack and lead time are on the MOQ page; the wheat protein peptides page covers the soluble alternative; the grades page explains vitality; the methods library and the quality page describe the work. ### 04 Wheat gluten: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/protein-collagen/wheat-gluten/moq/ Reviewed: 2026-11-20 Wheat gluten is sold from 1 kg: the smallest unit is a foil pouch, and production runs use a 25 kg fiber drum. Standard packs are dispatched in 1–7 days. A usable quote has to name the grade and wheat source, the protein and gluten methods, the quantity and pack, the destination and Incoterm, the documents including the allergen statement, and the intended use and market. In one lineThe 1 kg pouch is the qualification unit: it carries a lot code, a COA and enough material for a bench trial and a retained sample. ## Why the smallest pack is 1 kg A kilogram is enough for a bakery or bar trial, a retained sample and an outside check of protein, gluten and moisture. Trials often take only a few hundred grams, so the rest of the pouch stays available for a repeat or a referee laboratory. The pouch carries its own lot code; it is not a scoop from a drum. Smaller quantities mean splitting a larger lot, which adds handling and breaks the link between the pack, the lot code and the certificate. The chemistry does not change; the traceability does. A 25 kg drum cuts handling per kilogram and commits more inventory. The 1 kg minimum is a pack decision, not a volume target. The material matters more than the pack size. Wheat gluten and wheat protein peptides are separate products with separate specifications, and a 1 kg pouch of one is not a substitute for the other. The order and the quotation should both say which material and grade. ## Packs and physical forms Standard wheat gluten packs | Pack | Net weight or form | Typical use | Notes | Foil pouch | 1 kg | Trial and small runs | Moisture barrier; close tightly after use | Fiber drum | 25 kg | Production | Liner inside; lot code on drum and liner | Powder, 80 mesh | Standard form | General use | ≥95% through 80 mesh | Granulated | On request | Flow and dust control | Different particle profile; longer lead time The catalog form is an 80 mesh powder. Granulation is a specification change rather than a packing option: it alters the particle-size line and the way the powder flows and disperses. A free-flowing granule has to be requested before the quotation, not added at dispatch. ## Dispatch window and transit Standard packs are quoted at 1–7 days from confirmation. The clock covers picking, documents and handover to the carrier; it does not cover transit, customs or the customer's release. An extra test or a granulated lot needs its own time, stated separately. Ask for the dispatch date as well as the window. The pouch generally ships as a parcel and the drum as a pallet; the Incoterm decides who books and clears. The COA and allergen statement should be in the same shipment as the pack. ## What a firm quotation contains Six details make a quote comparable: - Product and grade. Wheat gluten with the grade named (vital or devitalized), CAS 8002-80-0; or the hydrolysed product if that is the material required. - Specification. Protein factor and basis, gluten method, moisture, ash, mesh, metals and micro. - Quantity and pack. 1 kg pouch, 25 kg drum or granulated. - Destination and Incoterm. Country, port or address, and trade term. - Documents. COA, TDS, SDS, allergen and gluten statements, plus any destination declaration. - Use and market. Bakery, bar, blend or supplement, and the country of sale. A quote that omits the grade or the market is not comparable with another. The same powder can fit one destination and fall outside the file for another, and the allergen statement is part of the offer. Commercial terms are not published here; they are stated on the quotation. ## A sample has to be a traceable lot The 1 kg pouch is the lot you qualify. Check protein with its factor and basis, gluten by the named method, moisture, ash and micro, then retain a sample from the same pouch. A vitality test or a test bake belongs in the trial if dough function is the reason for the purchase. The lot code should connect pouch, COA and quotation. A trial needing less than a kilogram is a split, not the catalog pack. It comes out of a bulk lot, carries a separate handling record and should not be presented as the 1 kg foil pouch. Request the split in writing and file its lot code alongside the trial data. ## Terms to agree before ordering Put the commercial and quality terms on one page: Incoterm, pack, dispatch, specification revision, lot COA, allergen statement version, retained sample, retest period and the change route. A quality agreement before the first production order is easier than a dispute afterwards. Wheat is a crop, so source and crop year belong in the change record. A new crop, a different mill or a change of grade is a notification and, where function matters, a new trial. If a lot misses the specification, the retained sample and a joint re-test on the named method are the route, not a photograph of the drum. The catalog values are on the wheat gluten product page; release tests are on the COA page; the allergen file is on the compliance page; the wheat protein peptides page covers the hydrolysed alternative; the methods library describes the protein work; the quality page covers release. ### 05 The regulatory file for wheat gluten URL: https://nutrition.rainwoodbio.com/products/protein-collagen/wheat-gluten/compliance/ Reviewed: 2026-11-20 Wheat gluten has a long history of use as a food ingredient, so it is not a novel food in the EU, and in the US it is used as a conventional food ingredient. The compliance work sits in the allergen declaration, the rules for gluten-free claims, the contaminant limits for wheat and the claims made for the finished product. Wheat is a regulated allergen in both markets, and “gluten” on a label is a claim with its own thresholds. The buyer's regulatory team confirms the route for the destination. In one lineWheat gluten is a food ingredient with a long history of use, but wheat is a regulated allergen and gluten is a labelling question in every market. ## What belongs in the file The file has four parts: the specification version for the material and grade, the certificate that released the lot, the allergen and gluten statements, and the destination route for the finished product. The certificate describes the powder, not the finished product's route or label. Wheat gluten is used as a food ingredient, and the same material can appear in a bakery product, a protein bar, a powder blend or a food supplement. Each route brings its own rules, and the buyer's regulatory team records which one applies before the label is written. The supplier keeps the source, the grade, the process and the pack under change control. ## European Union Regulation (EU) No 1169/2011 governs food information to consumers. Annex II lists “cereals containing gluten”, with wheat named, among the substances that must be declared, and the allergen has to be emphasised in the ingredient list. The exemptions in that annex cover the listed wheat-based glucose syrups and wheat-based maltodextrins; they do not cover wheat gluten or a wheat protein hydrolysate. Gluten claims have their own regulation. Regulation (EU) No 828/2014 permits “gluten-free” only where the food contains no more than 20 mg/kg of gluten, and “very low gluten” only where it contains no more than 100 mg/kg. A product made with wheat gluten does not meet the gluten-free condition as supplied. If the finished product is a food supplement, Directive 2002/46/EC and the national implementing rules sit alongside the labelling and contaminant rules; Regulation (EU) 2023/915, as amended, sets the contaminant limits. This is the position as of this review, and the consolidated texts are the reference. ## United States Wheat is a major food allergen under FALCPA, and the label must declare it, either in the ingredient list with “wheat” named or in a “Contains: wheat” statement. The FDA gluten-free labelling rule at 21 CFR 101.91 allows that claim only where the food contains less than 20 ppm of gluten and does not contain a wheat ingredient unless the wheat has been processed to remove gluten. Wheat gluten is used as a food ingredient in the US. If the finished product is positioned as a dietary supplement, the buyer's team confirms the dietary-ingredient basis, the Supplement Facts panel and the allergen statement, and checks the structure/function language separately. The certificate supports the material, not the market route. ## The allergen statement The allergen statement should name both the source and the fraction: “contains wheat; contains gluten.” The first part names the source that the EU and US allergen lists name; the second names the protein fraction that the gluten-free rules address. The label itself follows the market format, with the wheat emphasised in the EU ingredient list and a “Contains: wheat” statement in the US. The grade does not change the statement: vital gluten, devitalized gluten and wheat protein peptides are all wheat ingredients. Hydrolysis is not an exemption. A wheat protein peptide can retain IgE-binding epitopes, and the legal declaration is based on the source. Analytical support for a gluten-free claim needs a validated method with a stated detection limit; sandwich ELISA kits can under-report hydrolysed or heat-treated wheat protein, so the method has to be fit for the matrix. Neither material may be described as wheat-free, and the finished product cannot be described as gluten-free without meeting the threshold. ## Contaminants and the finished-product limit The catalog panel is a release gate. The legal limit depends on the destination, the food category and the daily dose, and the finished-product calculation is what the file has to show. Contaminants to confirm for wheat gluten and the finished product | Parameter | Catalog release limit | What the file should show | Lead (Pb) | ≤3 mg/kg | Lot result, method, legal limit and finished-product calculation | Arsenic (As) | ≤2 mg/kg | Lot result and the agreed limit | Cadmium (Cd) | ≤1 mg/kg | Lot result and any category exception | Mercury (Hg) | ≤0.1 mg/kg | Lot result and method | Mycotoxins | Not in the catalog panel | Deoxynivalenol result against the destination limit for wheat | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Lot count and absence statement Mycotoxins deserve a separate request because wheat is a susceptible crop. Deoxynivalenol is the relevant Fusarium toxin for wheat, and the destination regulation sets the level by product category. A certificate that reports only heavy metals has not covered this risk. ## Claims on the finished product In the EU, nutrition and health claims follow Regulation (EC) No 1924/2006. A “source of protein” claim requires protein to provide at least 12% of the energy, and “high protein” at least 20%; the calculation uses the final recipe, not the ingredient. A health claim needs an authorised wording, and no disease claim is available for a food. In the US, a “good source” or “high” protein claim follows the daily-value conditions in 21 CFR 101.54, and a structure/function statement needs substantiation and the DSHEA disclaimer when the product is a supplement. “Gluten-free” is a claim with its own threshold in both markets. No health claim for wheat gluten appears on this site. ## Documents for the wheat gluten file The buyer's file needs the COA with protein, its factor and basis, the gluten method, moisture, ash, the metal panel and microbiology; the specification naming the grade and the source; the TDS and SDS; the allergen and gluten statements with their version date; the GMO, origin, irradiation and processing-aid statements; and a mycotoxin result where the destination requires one. Add the crop year and the source record, because both can change the functional behaviour of the lot. The wheat gluten product page holds the catalog specification; the COA page walks through the certificate; the identity page collects the analytical evidence; the wheat protein peptides page covers the hydrolysed alternative; the methods library covers the protein work; the EU regulatory notes and the US regulatory notes collect the framework references; the quality page describes the release file. ## Checks before the first order - Specification version, CAS, grade and wheat source are named. - COA, TDS, SDS, allergen and gluten statements are on file. - The GMO, origin, irradiation and processing-aid statements are current. - The metal and mycotoxin results are converted to the finished-product dose. - The label, the protein claim and any gluten claim have been reviewed for the destination. - The source, grade and pack are under change control, and the quotation matches the specification revision. ### 06 How we prove a wheat gluten lot is wheat gluten URL: https://nutrition.rainwoodbio.com/products/protein-collagen/wheat-gluten/identity/ Reviewed: 2026-11-20 A wheat gluten lot is identified by a chain of agreeing measurements. The document names the material, the grade and the source; Kjeldahl nitrogen with the factor and basis gives the protein; a named gluten method gives the gluten figure; a protein profile shows the wheat storage proteins; and the mass balance leaves no room for starch or mineral filler. No single number proves identity, because a blend can be built to meet a protein target. The catalog specification is wheat gluten at ≥75.0% protein by N × 5.7 on the dry basis. In one lineIdentity is a chain of agreeing measurements: nitrogen by the stated factor, a gluten method that names its basis, a protein profile and a mass balance that leaves no room for starch. ## The five identity layers A certificate may name the right material without proving it. The layers below ask separate questions, and each needs its own evidence. A supplier who answers only the first has described paperwork, not powder. Five layers of wheat gluten identity | Layer | Question | Test | What it proves | Document | Are the material and grade named? | Name, CAS 8002-80-0, wheat source, vital or devitalized | Paperwork only | Nitrogen | How much protein is present? | Kjeldahl, N × 5.7, dry basis | The protein figure, not the source | Gluten | How much gluten, and is it vital? | Named washing or gluten-index method; vitality test | The gluten fraction and its function | Profile | Is it wheat? | SDS-PAGE or HPLC protein profile; amino acid pattern | The wheat storage-protein family | Balance | Is it diluted? | Moisture, ash, starch, mass balance | Consistency of the numbers ## The nitrogen factor and the ratios that expose a blend The nitrogen factor is a convention. This catalog uses 5.7; Codex Standard 163-1987 uses 6.25 for wheat gluten. The same result restated with the other factor is 75.0 × 6.25 ÷ 5.7 = about 82.2%. A supplier who reports 82% with the Codex factor and a supplier who reports 75% with the catalog factor may be describing the same powder, so the factor has to travel with the number. The protein-to-gluten ratio is a second check. At 75.0% protein and 75.0% gluten the ratio is 1.0, which is what an intact wheat gluten should show when both lines use the same basis and a comparable method. A gluten figure well below the protein figure can mean a different method, a non-gluten protein fraction or a blend. The two lines should be read together, and neither should be copied from the other. The dry-basis correction is the third ratio. A lot at 78.0% protein as received with 7.0% moisture is 83.9% dry basis; 75.0% dry basis at 8.0% moisture is 69.0% as received. A blend with 20% wheat starch would pull a 75.0% protein down to 60.0%, and the starch would also show in the mass balance and in the iodine test. The arithmetic is simple, and it catches the common dilution before a laboratory is booked. ## X-ray diffraction: a filler screen, not an identity test Wheat gluten is largely amorphous, so X-ray diffraction does not produce a fingerprint pattern that proves the protein. A diffractogram with sharp crystalline peaks is telling the reader about something else in the powder: crystalline starch, a mineral filler or a salt. That makes XRD a useful screen for adulteration and a poor release test for identity. If a supplier offers “XRD conforms”, ask for the reference pattern and the detection limit. For wheat starch, the crystalline A-type pattern is a recognisable signal; for an amorphous protein, the absence of peaks is the expected result. XRD plus microscopy and an iodine test is a stronger check on starch than XRD alone. It is not a substitute for the protein profile. ## How a substitution shows up Common wheat gluten substitutions and the signals | Adulterant | What it does | Signal | Test | Wheat starch | Lowers protein; changes texture | Protein and gluten low; starch high | Mass balance, iodine, XRD, microscopy | Lower-protein flour | Dilutes protein; adds starch and ash | Protein near the floor; ash up | Protein, ash, starch | Devitalized gluten sold as vital | Protein passes; dough function fails | Weak or short hydrated mass | Vitality or wet-gluten test, test bake | Soy or pea protein | Raises protein; changes amino acids | Lysine up; profile differs | Amino acid analysis, SDS-PAGE, ELISA | Moisture | Lowers the as-received protein | Moisture above the limit | Loss on drying | Mineral filler | Raises ash; adds crystalline peaks | Ash above 1.0% | Ash, XRD, ICP-MS Colour is the weakest signal. Off-white to cream covers a wide range, and a blend can match it. The stronger signals are the protein-to-gluten relationship, the amino acid pattern, the vitality test and the mass balance. A certificate that reports appearance and protein but no profile has left the most likely substitution untested. ## Writing identity into the specification - “Wheat gluten, grade named as vital or devitalized, CAS 8002-80-0; wheat source and crop year declared.” - “Protein ≥75.0% by Kjeldahl, N × 5.7, on the dry basis; report moisture beside it.” - “Gluten content ≥75.0% by the named method, with the basis.” - “Identification by protein profile (SDS-PAGE or HPLC) against a reference.” - “Moisture ≤8.0%; ash ≤1.0%; particle size ≥95% through 80 mesh.” - “Vitality test by the agreed method where dough function is claimed.” - “Allergen statement: contains wheat and gluten; no gluten-free claim.” ## Five questions to ask the supplier - Is this lot vital or devitalized, and which wheat source and crop year does it come from? - What nitrogen factor and basis were used, and what is the moisture result? - Which gluten method was used, and what is the gluten result on the same basis? - Can you provide the protein profile and the amino acid pattern, not only the protein percentage? - If dough function is claimed, what vitality result supports it, and will you accept a joint re-test on the retained sample? Those answers, taken together, form the identity file; one protein percentage cannot. The catalog values are on the wheat gluten product page; the COA page shows where each figure belongs; the grades page explains vitality; the wheat protein peptides page covers the hydrolysed alternative; the methods library and the quality page describe the analytical and release work. ### 01 What the COA for whey protein hydrolysate actually contains URL: https://nutrition.rainwoodbio.com/products/protein-collagen/whey-protein-hydrolysate/coa/ Reviewed: 2026-11-20 A certificate for a whey protein hydrolysate carries the composition panel of any whey powder and one parameter that no isolate or concentrate has: the degree of hydrolysis. The protein figure is a Kjeldahl nitrogen result expressed against a dry basis, while the degree of hydrolysis says how much of that protein was cleaved into shorter chains. The catalogue limits are in the tables below; the batch COA confirms the lot being shipped. In one lineA hydrolysate certificate has to carry two figures that define the product: the protein on a named nitrogen factor and dry basis, and the degree of hydrolysis that says how far the breakdown went. ## The parameter list “Whey protein hydrolysate” is a family name. It covers powders from a light partial hydrolysis to a product where most of the protein sits in short peptides; the degree of hydrolysis separates them. The certificate therefore reads as a composition panel plus a process figure, not a single assay. Catalogue parameter list · whey protein hydrolysate 80 | Parameter | Method | Catalogue limit | Appearance | Visual | Off-white to cream powder | Identification | Protein profile against a reference | Conforms | Protein, dry basis | Kjeldahl, N × 6.38 | ≥80.0% | Degree of hydrolysis | OPA or equivalent, named on the certificate | 15.0–25.0% | Moisture | Loss on drying | ≤5.0% | Fat | Solvent extraction | ≤2.0% | Lactose | HPLC | ≤2.0% | Particle size | Sieve analysis | ≥95% through 80 mesh Contaminant panel · whey protein hydrolysate 80 | Parameter | Method | Catalogue limit | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and pathogen screen | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent Three things are deliberately absent from this panel: ash, sodium and the peptide size distribution. Hydrolysis runs at a controlled pH; the acid or alkali used to hold it leaves a mineral residue, so ash and sodium can move without the protein figure moving. They are agreed separately when a formula or a market file needs them. The peptide distribution is the property the degree of hydrolysis only approximates. ## Protein basis, nitrogen factor and degree of hydrolysis The protein figure hides two conversion steps. The first is the nitrogen factor: milk protein is calculated as nitrogen × 6.38, and the same powder read with the general food factor of 6.25 would report 78.4% instead of 80.0%, because 80.0 ÷ 6.38 = 12.5% nitrogen and 12.5 × 6.25 = 78.4%. The second is the moisture basis: 80.0% on a dry basis at the 5.0% moisture limit is 76.0% as the powder is weighed. A certificate that reports a bare percentage has hidden both steps. The degree of hydrolysis is a different kind of number. It is the share of peptide bonds that the enzyme has cleaved, expressed against the total, and it is measured by a colorimetric or titration method such as OPA, TNBS or pH-stat. Each method gives a slightly different answer on the same lot, so the method should be named. A degree of hydrolysis of 20% means roughly one bond in five has been cut; the protein is not converted into free amino acids, and much of the mass remains in peptides long enough to behave like protein. The figure is an average. Two lots can both report 20% and still differ in how the peptides are distributed, so a distribution by size-exclusion HPLC or electrophoresis is the second measurement worth asking for. The HPLC method note describes how a size-based separation is set up, and the identity page sets out where the distribution sits in the identity file. ## The accepted limit and the measured result Each line carries two numbers that are not interchangeable: the limit the lot had to meet, and the figure the laboratory actually measured. Print them in separate columns, with the method beside them. A column that repeats the limit is a copy of the specification, not a result. How each release line should read | Parameter | Accepted limit | What the result states | Protein | ≥80.0% dry basis, N × 6.38 | A measured percentage with the nitrogen figure and the moisture | Degree of hydrolysis | 15.0–25.0% | A measured percentage and the method | Moisture | ≤5.0% | A measured percentage | Fat and lactose | ≤2.0% each | A measured percentage for each | Heavy metals | Per element | A figure in mg/kg for each element, not a total | Microbiology | Counts and absence | A plate count plus the absence statement for the lot The degree of hydrolysis is often reported as “conforms” with no figure, yet that is the line a buyer most needs: a lot at 16% and a lot at 24% are both inside the window and taste different. Ask for the number and the method, and match them to the sample that was tasted; the grades page explains why the band is wide. ## What moves between batches The enzyme preparation, the hydrolysis time, the temperature and the point of inactivation set the degree of hydrolysis. The neutralisation step sets the ash and the sodium. The dryer sets the moisture, the particle size and the colour, and a long warm hold before drying darkens a powder that still passes every limit. Bitterness moves with the peptide profile rather than with the protein figure. A change of enzyme or a longer hydrolysis can raise the bitterness while the protein and the moisture stay inside the specification, so a taste check on the retained sample belongs in the change control. Colour is the weakest line: off-white to cream covers a wide band, and a shift inside it is not an identity failure. Particle size is a finishing specification: a change of mill or sieve changes the result without touching the chemistry, and it changes how the powder flows at a stick-pack filler. ## Bringing in a referee laboratory Commission an outside test when the source is new, when the first shipment enters a regulated market, when the hydrolysate claim is contested, or when a result is disputed. A targeted panel is enough: protein by Kjeldahl, degree of hydrolysis by a named method, peptide distribution by size-exclusion HPLC, lactose and fat, the heavy-metal panel by ICP-MS, microbiology, and a milk-protein check if the allergen declaration is in question. Ask the laboratory to report its limit of detection for each screen: a “not detected” line without a limit describes the method, not the sample. The laboratory should test the retained sample and name the lot on its report. ## Reading two quotations side by side Line up six items: the protein result with its nitrogen factor and basis; the degree of hydrolysis with its method; the peptide distribution; fat, lactose and moisture; the allergen and origin statements; and the pack size with the lot code. Two quotations that agree on protein but differ on the hydrolysis method are not offering the same powder. The catalogue specification sits on the product page. The comparison with the isolate covers taste and the label; the release file is described on the quality page; the methods index lists the test notes behind these lines. ### 02 Choosing a whey protein hydrolysate grade URL: https://nutrition.rainwoodbio.com/products/protein-collagen/whey-protein-hydrolysate/grades/ Reviewed: 2026-11-20 A whey protein hydrolysate is chosen for its degree of hydrolysis and its powder form, not for its protein percentage: the catalogue floor is 80.0% on a dry basis, the same as a concentrate, while the hydrolysis band runs from 15.0% to 25.0%. Inside that band the peptide profile, the bitterness and the mineral residue move, and those are what a formula depends on. The grade name has to carry the hydrolysis figure for the same reason. In one lineThe grade of a whey hydrolysate is set by its degree of hydrolysis, not by its protein percentage, because the protein floor is the same across the family. ## Why the family is graded by hydrolysis A hydrolysate is made by treating whey protein — usually a concentrate or an isolate — with a food-grade protease at a controlled pH and temperature, then inactivating the enzyme and drying the liquor. The protein is not concentrated by that step; it is cut. That is why a hydrolysate and a concentrate can both sit at 80.0% protein on a dry basis and still behave differently in water and on the tongue. The degree of hydrolysis is the figure that names the grade. A powder at the lower end of the band keeps more intact protein, tastes milder and behaves more like an isolate. A powder at the upper end has more short peptides, a stronger savoury or bitter note and a higher osmolality at the same protein dose. Both are inside the catalogue specification, and a buyer who orders “hydrolysate” without a hydrolysis figure has not chosen between them. Two further choices ride on the same grade name. The enzyme selection changes which peptides are produced, so two powders at the same degree of hydrolysis can differ in bitterness. The neutralisation step leaves a mineral salt and moves ash and sodium. Neither appears in the protein figure. ## Where the hydrolysate sits in the whey family Whey protein hydrolysate, isolate and concentrate · catalogue limits | Property | Hydrolysate 80 | Isolate 90 | Concentrate 80 | Protein, dry basis | ≥80.0% | ≥90.0% | ≥80.0% | Degree of hydrolysis | 15.0–25.0% | Not applicable | Not applicable | Fat | ≤2.0% | ≤1.0% | ≤6.0% | Lactose | ≤2.0% | ≤1.0% | ≤5.0% | Ash | Agreed separately | ≤3.0% | ≤4.0% | Taste in water | Mild to savoury, bitter at higher hydrolysis | Bland, milky | Milky, slightly cooked | Clarity in water | Clear to slightly opalescent | Slightly opalescent | Opaque | Main use | Clear drinks, sticks, acidified systems | Clear drinks, bars, high-protein claims | Opaque shakes, bars, bakery The ash line is the one to watch when the grade is switched. The isolate and the concentrate carry a catalogue ash ceiling; the hydrolysate here does not, because neutralisation makes the figure process-specific. If the formula has a mineral budget, agree the ash and sodium limits in writing rather than assuming the isolate figure carries over. ## Standard powder and instantized powder The catalogue form is an 80 mesh powder, ≥95% through the sieve. It disperses freely in water and gives a clear to slightly opalescent solution, which is the practical reason a hydrolysate is chosen for a clear or acidified drink. The powder is hygroscopic: an open pouch takes up moisture, the particles stick and the bag sets, and the moisture figure on the certificate stops describing what is in the drum. An instantized version is available on request. Agglomeration makes the powder wet faster and produce less dust on a filling line, but it changes the particle-size line, so it is a different specification rather than a packing option. If the instantizing aid is lecithin, the powder may carry a soy-derived carrier, and the allergen statement has to be checked. That is a label change, not only a line change. Foaming is the other physical behaviour to test: whey proteins foam when mixed or pumped, and the peptide profile changes how much. A powder that foams heavily in a pilot mixer can leave the filler short of volume, so the trial should measure foam. ## What the grade does to the dose Protein per serving is the same arithmetic across the family: the as-is protein is the dry-basis figure minus the moisture. At the 5.0% moisture limit the hydrolysate is 76.0% protein as weighed, so a 20 g protein serving needs 26.3 g of powder. The isolate at its 90.0% floor and the same moisture needs 23.4 g. What 20 g of protein carries at the catalogue limits | Per 20 g protein | Hydrolysate 80 | Isolate 90 | Concentrate 80 | Powder needed | 26.3 g | 23.4 g | 26.3 g | Fat at the limit | 0.53 g | 0.23 g | 1.58 g | Lactose at the limit | 0.53 g | 0.23 g | 1.32 g The hydrolysis figure does not change that arithmetic, but it changes the osmolality of the drink. Hydrolysis multiplies the number of dissolved particles per gram of protein, so a hydrolysate drink at 20 g protein carries a higher osmotic load than the same drink built on an isolate. The formulator feels it as taste and mouthfeel; the comparison with the isolate takes the point further. A capsule or tablet carries a small dose, so it suits a product where the hydrolysate is one ingredient among several rather than the protein source. For a protein dose the stick pack and the drink mix are the practical formats, and both need the powder to disperse without lumps. ## What to write into the specification - “Whey protein hydrolysate, protein ≥80.0% on a dry basis, Kjeldahl N × 6.38.” - “Degree of hydrolysis 15.0–25.0%, method named on the certificate.” - “Peptide distribution by size-exclusion HPLC reported; bitterness checked against the approved sample.” - “Moisture ≤5.0%; fat ≤2.0%; lactose ≤2.0%; particle size ≥95% through 80 mesh.” - “Ash and sodium agreed separately if the formula or the label needs them.” - “Milk allergen statement, origin and pack, and whether the grade is standard or instantized.” The degree of hydrolysis and the bitterness belong in the same clause. A specification that fixes the number but not the taste can be met by two lots a consumer would not accept as the same product. ## When the hydrolysate does not fit If the formula is a neutral, opaque shake and nothing on the label depends on hydrolysis, an isolate or a concentrate is simpler: the taste is blander, the ash is capped and the specification is shorter. If the bitterness cannot be masked at the dose, a lower degree of hydrolysis or a different enzyme is the fix, and that is a grade change rather than a flavour change. If the finished product is an infant formula, the category is regulated separately and this food-grade specification does not cover it. If the label names an isolate, a hydrolysate is not a drop-in, even though both are whey protein. And if the hope is that hydrolysis removes the milk declaration, the grade cannot deliver that; the compliance page explains why. The product page carries the catalogue specification; the COA page shows how the two figures are reported; the stability page covers the moisture and heat risk; the quality page describes the release workflow. ### 02.1 Whey hydrolysate vs whey isolate: peptide size, taste and the label URL: https://nutrition.rainwoodbio.com/products/protein-collagen/whey-protein-hydrolysate/grades/whey-hydrolysate-vs-whey-isolate/ Reviewed: 2026-11-20 A whey protein isolate and a whey protein hydrolysate start from the same protein, and the difference is how much of it has been cut. The isolate is largely intact β-lactoglobulin and α-lactalbumin; the hydrolysate has a measured share of its peptide bonds cleaved, so the powder contains shorter chains, more particles per gram and a taste that the isolate does not have. The protein figure moves by ten points between the two catalogue grades, and that is the least important of the changes. In one lineThe isolate is the whole protein and the hydrolysate is the same protein cut into shorter chains; the peptide size changes the taste and the label, while the protein figure stays close. ## What the peptide size actually is Whey protein is a mixture, and the isolate keeps it largely intact: β-lactoglobulin at about 18.4 kDa, α-lactalbumin at about 14.2 kDa, bovine serum albumin at about 66 kDa and the immunoglobulins above that, with a small peptide fraction. A hydrolysate at 15–25% degree of hydrolysis has cut roughly one bond in four to one in seven, so it is not a collection of dipeptides but a range from free amino acids to fragments that are still large. That range is why the degree of hydrolysis is not a peptide size. It is an average over all the bonds in the protein, and two powders at the same figure can sit at different points on the distribution. The enzyme, the pH and the point of inactivation decide which bonds are cut, so the profile is a property of the process. Ask for a size-exclusion HPLC distribution with stated cut-offs and the method behind it, rather than a single average molecular weight. Intact isolate and hydrolysate at the catalogue limits | Property | Whey protein isolate 90 | Whey protein hydrolysate 80 | Protein, dry basis | ≥90.0% | ≥80.0% | Degree of hydrolysis | None; intact protein | 15.0–25.0% | Characteristic species | β-lactoglobulin, α-lactalbumin, albumin, immunoglobulins | Peptides from free amino acids to large fragments | Particles per gram of protein | Lower | Higher, because chains are shorter | Fat and lactose | ≤1.0% each | ≤2.0% each | Taste in water | Bland, milky | Savoury to bitter, rising with hydrolysis ## The protein arithmetic Both products carry protein on the same basis: Kjeldahl nitrogen × 6.38, expressed on a dry basis. At the 5.0% moisture limit the isolate's 90.0% becomes 85.5% as weighed and the hydrolysate's 80.0% becomes 76.0%, so a 20 g protein serving needs 23.4 g of isolate or 26.3 g of hydrolysate. The hydrolysate therefore brings about 3 g more powder per serving, and that powder carries its own fat, lactose and minerals. The label arithmetic runs the same way for both. The protein claim is set by the protein in the serving, not by the form: 20 g is 40% of the US Daily Value and, at 4 kcal per gram, 80 kcal of the serving's energy. The form changes the ingredient name and the taste, not the number of grams of protein that the panel declares. ## Where the bitterness comes from Proteolysis exposes hydrophobic amino acids — leucine, phenylalanine, tyrosine, tryptophan and proline — at the ends of the peptides, and those residues are what the tongue reads as bitter. Bitterness generally rises with the degree of hydrolysis, then flattens or shifts as peptides become short and free amino acids add their own tastes. The isolate, still folded, tastes bland and milky. The hydrolysate also changes the mouthfeel through osmolality. Shorter chains mean more dissolved particles for the same grams of protein, and osmolality is a colligative property, so a drink built on the hydrolysate carries a higher osmotic load than the same drink built on the isolate. The difference is felt as a sharper, saltier or thinner taste and it belongs in the formulation, not in the quality complaint. Masking is possible but it is formulation work: a flavour system, a sweetener, a hydrocolloid for body, and the right acid level. The first check is a taste test at the real dose in the matrix: acceptable at 5 g of powder can be sharp at 26 g. The enzyme choice is the second lever, and it is a grade decision rather than a flavour decision. ## The label names the form In the EU the ingredient list names the material and the milk, with the allergen emphasised: “whey protein isolate (milk)” or “whey protein hydrolysate (milk)”. In the US the ingredient statement reads “whey protein isolate (milk)” or “hydrolysed whey protein (milk)”, with the FALCPA declaration following. The two names are not interchangeable on a label, and a product named as a hydrolysate on the front and declared as an isolate in the list has a labelling problem that no certificate fixes. “Hydrolysed” is a description of the process. Neither market has an authorised claim that a hydrolysed protein is easier to digest, and “predigested” is marketing language rather than a permitted claim. “Hypoallergenic” sits in the infant-formula and medical-food framework and is not available for a general food or supplement. The milk declaration stays on both products, because hydrolysis reduces the protein size but does not remove the allergen. ## What changes on the line The hydrolysate is the more hygroscopic powder, so the pack, the in-use period and the store matter more. It tends to hold clarity better than the isolate in an acidified drink, because less intact protein is available to aggregate near the isoelectric region, which is why a clear acidic beverage is often built on it. Foaming differs with the peptide profile and should be measured in the pilot mixer rather than assumed from the certificate. Both are made as an 80 mesh powder and both can be instantized; agglomeration is a different particle-size specification. A switch between the two products is a change of ingredient: it moves the taste, the osmolality, the pack behaviour and the label, so it belongs in change control with a new taste panel and a new shelf-life check. ## When to choose each Choose the isolate for a neutral, opaque or mildly acidic product where a bland taste and the highest protein per gram matter, and where the lower fat and lactose limits help the label. Choose the hydrolysate for a clear acidified drink, for a liquid that receives a heat load, or where the product concept and the label call for hydrolysed protein and the taste budget can carry the bitterness. Neither is a drop-in for the other. The protein figures are close enough to adjust a formula on paper, and that is the trap: the taste, the osmolality and the ingredient name are what a consumer and a regulator see. The hydrolysate product page carries the catalogue specification; the isolate product page carries the comparison; the grades page places both in the whey family; the identity page covers the hydrolysis evidence; the methods index and the quality page describe the tests and the release file behind both. ### 03 Whey protein hydrolysate: moisture, heat and shelf life URL: https://nutrition.rainwoodbio.com/products/protein-collagen/whey-protein-hydrolysate/stability/ Reviewed: 2026-11-20 A whey protein hydrolysate is a hygroscopic powder with residual lactose and a partly cleaved protein, and both facts drive its storage behaviour. Moisture makes it cake and, with heat, browns it through the reaction between lactose and lysine; the solution adds a microbial load and a heat step of its own. The powder keeps well in a sealed pack in a cool, dry store, and the shelf life that can be defended is the one measured in that pack. In one lineThe shelf life of a hydrolysate is set by moisture and heat: the powder picks up water, cakes and browns, and only the pack and the store decide how long it keeps. ## The powder: moisture, caking and colour The catalogue limit is moisture ≤5.0%. That figure is where the lot is accepted, not what storage will preserve. A hydrolysate is more hygroscopic than an intact whey protein because the hydrolysis has exposed more polar groups, so an opened pouch takes water from the air faster than a concentrate would. The powder picks up moisture, the particles stick, the bag sets into lumps and the as-is protein figure falls because water is now part of the weight. Heat turns that moisture into a colour problem. The powder carries up to 2.0% lactose, and lactose reacts with the lysine of the protein in the Maillard reaction, which browns the product and reduces the lysine that the protein can deliver. A pallet stored under a roof in summer can show the effect in a few weeks while every release figure stays inside its limit. The colour standard on a hydrolysate is therefore a storage indicator as well as a release line. Fat is limited to 2.0%, but it is still enough to oxidise. The hydrolysate's fat fraction can pick up oxygen and develop a stale, cardboard note, which the bitterness of the peptides can hide in a taste test. Keep the pack sealed, keep the headspace small and keep the store cool. A desiccant helps in a humid climate, but it is not a substitute for an intact seal. ## The solution: clarity, heat and microbes The catalogue solubility is “freely dispersible, clear to slightly opalescent”. That clarity is one reason a hydrolysate is chosen over a concentrate for a clear drink, and it is also a stability measurement: a solution that clouds on standing has changed, whether the cause is a pH shift, a mineral interaction or microbial growth. In solution, the product is a dilute protein and peptide broth. It supports microbial growth unless the process controls it, and the heat step that controls it also drives browning and bitterness. A ready-to-drink process adds pasteurisation, hot fill or a retort; a stick pack sidesteps the heat load: the consumer adds the water. A bulk-powder result does not transfer to either format. The hydrolysis reaction is stopped before drying, and the enzyme is inactivated in the process, so the solution does not usually continue to hydrolyse. The changes that matter are physical and chemical: colour darkening, a bitterness that increases as peptides and free amino acids react, and, in a clear drink, a haze that appears over the shelf. Validate the hold time before the filler and the heat load in the process, not only the bulk powder. ## What drives degradation Factors that move a whey protein hydrolysate during storage | Factor | What it does | Control | Moisture | Caking, higher as-is weight, faster browning | Sealed foil pouch; dry store; in-use period | Heat | Accelerates browning and fat oxidation; darkens colour | Cool store; controlled process heat load | Oxygen | Fat oxidation; stale off-note | Low headspace; sealed pack; nitrogen flush if agreed | Light | Riboflavin-driven off-flavour and colour change | Opaque or foil pack; dark store | pH | Haze and solubility loss near the isoelectric region | Validate matrix pH; check clarity over shelf life | Metal ions | Colour and oxidation in solution | Stainless or glass contact; no iron or copper These factors interact. A warm, humid, bright store compounds the three effects rather than adding them, and a clear bottle of a neutral drink combines light, oxygen and heat. The question worth asking is not whether the powder is stable but how long it stays stable in a named pack under a named condition. ## A stability protocol for the ingredient An auditable protocol fixes the pack, the condition, the time points and the test panel. Hold samples at 25 °C/60% relative humidity for the long term and at 30 °C/65% for the intermediate condition; 40 °C/75% is the accelerated arm that stresses the pack. A light-exposure arm covers the riboflavin-driven route that a dark incubator misses. Test protein, moisture, colour, fat oxidation, microbiology and a sensory bitterness score at each point. Re-assay the degree of hydrolysis if residual enzyme activity is a concern, because a rising figure would mean the powder is still changing. The report should list each result rather than a pass statement, and it should name the pack and the lot family. The methods index lists the test notes behind the panel. Ask for the summary for the pack you will buy. A 25 kg fiber drum and a 1 kg foil pouch have different headspace, different opening histories and different surface-to-volume ratios, so the file has to match the pack. ## The finished format changes the answer A stick pack usually fails at its seal: one pinhole in the laminate lets moisture through, so both the strip and the powder are checked. A bar brings humectants and a water activity that can move moisture into the protein particles, so the browning risk rises even though the bar is not a liquid. A capsule or tablet holds a small dose and starts at low water activity, but a hygroscopic fill can still pull water from the shell. A ready-to-drink product combines the heat load, the pH and the oxygen in one pack, and it needs its own shelf life. Bulk stability is where the development work starts, not where it ends. Whether an overage is needed is the formulator's call, and it is a label and stability decision; it cannot rescue a pack that lets moisture through. ## How the shelf life is set There is no single shelf-life figure for the hydrolysate: the pack and the storage condition decide it. The retest period is stated on the specification and backed by the stability file for the pack in question. A figure with no pack, no condition and no test panel behind it is a claim, not a shelf life. When the retest period ends, re-assay the retained sample before extending anything. Extension needs a new assay, not an assumption, and a bulk figure does not transfer to a repacked container. The product page lists the standard packs; the COA page explains the release tests; the MOQ page covers the pack and the lead time; the quality page describes the release workflow. ### 04 Whey protein hydrolysate: MOQ, packs and lead time URL: https://nutrition.rainwoodbio.com/products/protein-collagen/whey-protein-hydrolysate/moq/ Reviewed: 2026-11-20 Orders start at 1 kg in a sealed foil pouch, with a 25 kg fiber drum as the bulk unit. Standard powder dispatches in 1–7 days, and an instantized grade is made to order. A firm quotation needs the degree of hydrolysis, the protein basis, the pack, the destination and Incoterm, the documents and the intended use, because the same powder can fit one market and not another. In one lineA kilogram is the smallest order because a hydrolysate has to be tasted and assayed as a lot before anyone commits to a drum. ## Why the minimum is 1 kg A hydrolysate is bought on two properties that a specification sheet alone cannot confirm: the degree of hydrolysis and the taste. One kilogram is enough to run a protein assay, a hydrolysis check and a small sensory panel, and to keep a retained sample for the file. It is also a sealed, labelled unit with its own lot code, which is what makes the trial traceable. Below a kilogram the powder is typically split out of a larger lot and repacked. The split loses the original pack identity, adds a handling record and makes a dispute harder to settle, without changing the powder. The 25 kg drum is the production unit: it reduces handling per kilogram and commits inventory to a single lot. The minimum is a pack decision, not a sales threshold. ## Packs and formats Standard whey protein hydrolysate packs | Pack | Weight | Where it fits | Handling | Foil pouch | 1 kg | Bench trial and small batch | Moisture barrier; reseal or finish within the in-use period | Fiber drum | 25 kg | Production | Inner liner; keep the liner closed in a humid store | Instantized powder | On request | Faster wetting, less dust | Different particle size; check any carrier and its allergen | Custom sieve cut | On request | Fill flow or blend uniformity | Particle size is a specification line, not a pack choice The powder is hygroscopic, so the pack is part of the specification. Once a pouch has been opened and rolled down, it no longer seals like the heat-sealed original, and the headspace holds damp air. For a long storage period, move the remainder into a smaller dry container or finish the pack within the in-use period. ## Lead time and dispatch Standard powder is quoted at 1–7 days after the order is confirmed. Inside that window sit picking, documents and handover to the carrier; transit, customs and the customer's own release are outside it. Instantizing, a custom sieve cut or another pack format adds time, and the quotation should show that separately instead of folding it into the range. Ask for a dispatch date, not only a range. A 1 kg pouch usually moves as a parcel, while a 25 kg drum travels on a pallet; the Incoterm allocates the freight booking and the entry clearance. The certificate and the specification should travel with the pack, not follow it, because a goods-in check without the matching lot document stops at the door. ## What a usable quotation states A quotation is comparable when it names six things: - Product and grade. Whey protein hydrolysate, with the degree of hydrolysis band and the powder form named. - Specification. Protein basis and nitrogen factor, hydrolysis method, fat, lactose, moisture, ash if required, microbiological limits and particle size. - Quantity and pack. How many kilos, and whether the pouch, the drum or an instantized variant. - Destination and Incoterm. Country, delivery point and trade term. - Documents. COA, specification, SDS, allergen statement and any dairy health certificate the destination requires. - Application and market. The use category, and the country where the finished product will be sold. A quotation that leaves out the hydrolysis figure or the destination is incomplete. The grade is a process property and the allergen declaration is a labelling one; neither can be settled after the order. Commercial terms are not given here; they appear on the quotation itself. ## A sample has to be traceable to its lot The 1 kg pouch is the unit released for qualification. Run the protein and hydrolysis assays, check the moisture, taste the powder at the intended dose in the intended matrix, and hold back a retained sample from that pack. Sample, certificate and quotation should all carry the same lot code. A sample without that thread back to a lot demonstrates a powder; it does not qualify one. Bitterness is the property most likely to be missed in a paper review. Taste it at the dose the label will declare, in water and in the finished matrix if there is one, because a hydrolysate that is acceptable at 5 g of powder can be sharp at 26 g. If the trial needs less than a kilogram, ask for a documented split and keep its lot code with the results. ## Terms to settle before the first order Put the commercial and quality terms on one page: Incoterm, pack, dispatch window, the specification revision, a certificate per lot, the retest period, a retained sample and the change route. The hydrolysis step deserves its own change-control clause, because a new enzyme or a longer hydrolysis changes the taste and the peptide profile while the protein figure stays inside the specification. When a lot misses the agreed specification, the answer is a joint re-test of the retained sample against the named method, rather than a photograph of the drum. The quality agreement should name the laboratory both sides accept and say who pays for the referee. A return decided on colour alone is hard to defend, because off-white to cream covers a wide band. The product page carries the catalogue specification; the COA page shows the release tests; the compliance page carries the allergen statement and the market file; the stability page covers storage and retest; the quality page describes the release workflow; the methods index lists the test notes. ### 05 The regulatory file for whey protein hydrolysate URL: https://nutrition.rainwoodbio.com/products/protein-collagen/whey-protein-hydrolysate/compliance/ Reviewed: 2026-11-20 Whey protein hydrolysate is a dairy ingredient, so the milk allergen declaration follows every pack into every market that keeps an allergen list. In the European Union the declaration sits under Regulation (EU) No 1169/2011 Annex II; in the United States it sits under FALCPA. Hydrolysis shortens the peptides but does not make the powder milk-free, and the finished product's route and claims remain the buyer's regulatory decision, so this page lists the documents and checks rather than promising a market. In one lineHydrolysis shortens the peptides but does not remove the allergen: every whey hydrolysate lot carries the milk declaration, and a hydrolysate cannot be declared milk-free on a food or supplement label. ## What the file contains The file holds four things: the specification version with the degree of hydrolysis, the certificate that releases the lot, the allergen and origin statements, and the record of how source, enzyme, process and pack changes are handled. The certificate describes the lot, the TDS carries the specification and the safety data sheet covers handling. None of the three settles the finished product's category, which is recorded separately. Whey protein is a traditional dairy ingredient — not a novel food in the EU and not a food additive in either market — as of this review. That does not make every finished product suitable: a supplement, a beverage, a bar and an infant formula sit in different categories, and the category sets the limits, the labelling and the claims. The ingredient paperwork supports the category decision; it does not replace it. Great Britain keeps its own labelling rules, while Northern Ireland follows the EU text. Which set applies turns on the delivery address, and the buyer's regulatory team notes that decision on the order. ## European Union Regulation (EU) No 1169/2011 requires the milk declaration in the ingredient list, emphasised by typography so that it stands out from the other ingredients. “Whey protein hydrolysate (milk)” is the form a reader expects; a declaration in a footnote, or an allergen statement separated from the ingredient list, is not the same thing. Framework references are gathered in the EU regulatory notes. General food law, Regulation (EC) No 178/2002, sets the traceability duty; Regulation (EU) 2023/915, which replaced 1881/2006, sets contaminant limits; Regulation (EC) No 1924/2006 governs nutrition and health claims; Directive 2002/46/EC covers food supplements. An infant formula made with a hydrolysate sits under its own delegated regulation and is not covered by a general food-grade specification. Check the consolidated text in force at the time of sale, because all of these instruments are amended. ## United States Milk is a major food allergen under FALCPA, so the label carries either “Contains: milk” or the milk in parentheses after the ingredient. A hydrolysed whey protein is still milk protein for that purpose. The ingredient statement, the Nutrition Facts panel and any structure/function statement are reviewed together, and the DSHEA disclaimer belongs with the claim, not in a separate document. The protein declaration uses the 50 g Daily Value, so 20 g is 40% of it. A “good source” claim covers 10–19% and “high” or “excellent source” 20% or more. A protein claim also brings the protein-quality calculation into the label review, and the serving size decides the arithmetic. The US regulatory notes set out the framework. ## Contaminants and limits The contaminant panel on the ingredient is per element. The limits for the finished product follow from the dose, so a drum result and a label claim are two different checks. Limits to check against the finished product | Parameter | Reference for a supplement | Evidence the file should hold | Lead (Pb) | 3.0 mg/kg in the supplement | The lot figure, the method and the dose calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | The lot figure and any category exception | Mercury (Hg) | 0.10 mg/kg in the supplement | The lot figure and the method | Arsenic (As) | Limit set by the buyer or the market | The agreed limit and method, printed on the certificate The catalogue micro panel — APC ≤1,000 cfu/g, yeast and mould ≤100 cfu/g, E. coli and Salmonella absent — is the release gate for the powder, not the food-safety criterion for the finished product, which depends on the process and the pack. The heavy-metal results are measured by ICP-MS and should be reported per element, not as a sum. ## Claims and the label A protein claim is arithmetic. EU nutrition claims set the bar at 12% of energy for “source of protein” and 20% for “high protein”; 20 g of protein is 80 kcal, so “high protein” needs a serving of no more than 400 kcal. In the US the same 20 g is 40% of the Daily Value. The NRV glossary entry and the Daily Value entry give the reference numbers behind those percentages. “Hydrolysed” describes the process, not a benefit. No authorised claim in either market says that a hydrolysed protein is easier to digest, and “predigested” is marketing language rather than a permitted claim. “Hypoallergenic” belongs to the infant-formula and medical-food framework, not to a general food or supplement, and it cannot be used for this powder. Neither market leaves room for a disease claim, and this site publishes specifications rather than health claims. The milk declaration is the one label element that no formulation change removes. A brand that wants to present the product as suitable for people avoiding dairy has to reformulate, not reword. Lactose is a separate point: the catalogue limit is ≤2.0%, which is not a lactose-free product, and the “lactose-free” thresholds in the destination market are far lower than that. ## Documents for the file The file needs a certificate with the protein figure on a dry basis and the degree of hydrolysis with its method, plus the specification version, the TDS and the SDS. Add the allergen statement for the material and the pack, the origin and manufacturing site, the dairy health certificate where the destination requires one, a GMO statement, and Kosher or Halal papers if asked for. The identity page lists the analytical evidence behind the claim that the powder is a hydrolysate. The supplier keeps the source, the enzyme, the process and the pack under change control; the buyer keeps the market route, the dose as sold and the label review. Both sides should be able to point to the same specification revision when a label is signed off. ## Checklist before the first order - Specification version, protein basis and degree of hydrolysis are named. - COA, TDS, SDS, allergen, origin and GMO statements are on file. - The milk declaration and the lactose position have been checked against the destination text. - Contaminant figures are converted to the dose as sold. - The claim and the label have been reviewed for the market, with no hydrolysed-protein benefit implied. - Source, enzyme and process are under change control, and the certificate matches the pack. The product page carries the catalogue specification, and the quality page describes the release file that supports these documents. ### 06 How we prove a lot is whey protein hydrolysate URL: https://nutrition.rainwoodbio.com/products/protein-collagen/whey-protein-hydrolysate/identity/ Reviewed: 2026-11-20 A whey protein hydrolysate lot is the named material when four things agree: the documents name the grade and the degree of hydrolysis, the protein profile matches a reference, the hydrolysis figure sits inside the agreed band, and the nitrogen result supports the protein figure on its dry basis. The assay alone cannot separate a hydrolysate from an isolate, because both are whey protein and both pass a Kjeldahl test. The hydrolysis evidence is what makes the claim. In one lineA hydrolysate is proven by three measurements that agree: the protein profile, the degree of hydrolysis, and the nitrogen figure the protein was calculated from. ## Four questions an identity file has to answer A certificate can name the correct material and still prove nothing about the powder. The four below are separate questions, each needing its own evidence. The CAS number on the record, 84082-51-9, names the whey protein mixture rather than a single molecule, so it identifies the ingredient family and never the lot. Four pieces of evidence for whey protein hydrolysate identity | Evidence | Question it answers | Test | What it establishes | Paperwork | Are the grade and the hydrolysis named? | Name, CAS, degree of hydrolysis | Paperwork only | Protein profile | Is the protein whey? | Electrophoresis or HPLC against a reference | The protein source | Hydrolysis | Is it a hydrolysate, and how far gone? | Degree of hydrolysis and peptide distribution | The process, not the source | Mass balance | Is it diluted or spiked? | Protein, moisture, fat, lactose, ash, nitrogen | Consistency of the numbers The second and third rows answer different questions, and a supplier who provides only one has answered only half of the page. An isolate can match the protein profile exactly; a hydrolysate made from soy would fail it. ## The ratios that carry the evidence The protein figure is a ratio: nitrogen × 6.38 for milk protein. At 80.0% protein on a dry basis the powder should report about 12.5% nitrogen, and at 5.0% moisture the as-is protein is 76.0%. A certificate that reports protein without the nitrogen figure leaves the reader unable to repeat the calculation, and a nitrogen figure far above 12.5% for a declared 80.0% protein points to nitrogen that the amino acids do not account for. The second ratio is the hydrolysis itself. The degree of hydrolysis is the share of peptide bonds cleaved, so it is a ratio by definition, and the peptide distribution adds the share of the protein mass below a stated molecular-weight cut-off. The two belong together: a degree of hydrolysis near 20% describes an average, and a size-exclusion profile shows whether the mass sits in short peptides or in a long tail. The HPLC method note covers the separation. A third ratio is worth asking for when the numbers look too good: non-protein nitrogen as a share of total nitrogen. Whey carries some non-protein nitrogen naturally, but free amino acids and other nitrogen sources inflate the Kjeldahl figure without adding protein. The amino-acid profile is the check, because a nitrogen total that the profile cannot account for is the signature of a spike. ## X-ray diffraction: what it can and cannot show A spray-dried protein powder is amorphous, so X-ray diffraction cannot identify the protein and is not a release test for it. What it can show is a crystalline phase that should not be there: crystalline lactose from a dilution, or a crystalline amino acid such as glycine or taurine added to raise the nitrogen figure. The XRD method note describes the measurement. Read a diffraction statement with care. “XRD conforms” without the reference pattern and the detection limit says little, and a mostly amorphous halo is the expected result for a hydrolysate, not a finding. Ask what the laboratory was looking for before accepting that it found nothing. For a disputed lot, XRD plus a peptide distribution plus the nitrogen balance is stronger than any one of the three. ## What adulteration looks like Substitutions to test for in a whey protein hydrolysate | Adulterant | What it does | Signal | Test | Whey isolate sold as hydrolysate | Same protein, no hydrolysis | Low degree of hydrolysis; no bitterness | DH assay, peptide distribution | Free amino acids | Raises the nitrogen figure without whey protein | Non-protein nitrogen high; free amino acid peaks | Amino-acid profile, NPN | Non-protein nitrogen | Inflates Kjeldahl without protein | Nitrogen above what the profile explains | Kjeldahl plus amino-acid profile | Lactose or maltodextrin | Dilutes the protein | Protein low; lactose or sugar high; ash low | HPLC sugars, mass balance | Soy or pea protein | Cheaper protein source | Protein profile differs; amino-acid pattern shifts | Electrophoresis, ELISA | A different hydrolysis band | Passes the name, not the behaviour | DH outside the agreed band; taste differs | DH assay against the agreed method Bitterness is a weak signal on its own, because a bitter note can come from the enzyme or the matrix, and a bland hydrolysate is not automatically an isolate. The stronger signals are the hydrolysis figure, the peptide distribution and the nitrogen balance. A certificate that reports protein and appearance but no hydrolysis has not tested the substitution that matters most here. ## Identity clauses for the specification - “Whey protein hydrolysate, protein ≥80.0% on a dry basis, Kjeldahl N × 6.38; report the nitrogen figure.” - “Degree of hydrolysis 15.0–25.0% by a named method; report the result, not only conformity.” - “Peptide distribution by size-exclusion HPLC against the approved sample.” - “Protein profile against a reference; no foreign protein detected.” - “Moisture ≤5.0%; fat ≤2.0%; lactose ≤2.0%; ash and sodium as agreed.” - “Lot code and pack recorded; retained sample kept for the agreed period.” The hydrolysis clause and the taste clause belong together, because a specification that fixes the number and not the flavour can be met by a lot nobody wants to use. ## Five questions for the supplier - What is the degree of hydrolysis for this lot, by which method, and what is the result? - Can you provide the peptide distribution, not only the hydrolysis percentage? - What is the nitrogen figure behind the protein result, and was any non-protein nitrogen measured? - Does the protein profile match the reference, and which method produced it? - Would you accept a joint re-test of the reserve sample if a result is disputed? Those five answers together make the identity file; a protein percentage on its own does not. The product page carries the catalogue specification; the COA page marks where each figure appears; the grades page explains the hydrolysis band; the comparison with the isolate covers what the name does not tell you; the quality page describes the release file. ### 01 What the COA for whey protein isolate actually contains URL: https://nutrition.rainwoodbio.com/products/protein-collagen/whey-protein-isolate/coa/ Reviewed: 2026-11-20 A whey protein isolate certificate reports protein by Kjeldahl with the 6.38 nitrogen factor on a dry basis, and the moisture figure that converts it to the powder as weighed; fat, lactose, ash, the metal panel, microbiology and particle size follow. Each line has to carry the method and the release limit the lot was passed against, with the measured result in its own column. The catalog limits are the gate; the COA shows a particular pack went through it. In one lineThe protein figure only means something with its nitrogen factor, its basis and the moisture beside it; the fat, lactose and ash then describe the powder behind the number. ## The certificate as a set of gates For each row the reader needs three things: what was measured, the method that produced the number, and the limit the lot was released against. A row that says only “conforms” asks the reader to accept a conclusion without evidence. On a whey isolate the protein row is the commercial one, the identity row is the one that says the powder is whey, and the fat and lactose rows are the ones the label will quote. Two rows are often merged and should not be. Protein by Kjeldahl is a nitrogen measurement; identification is a comparison against a reference. A certificate can report 91.5% protein and still fail to show that the protein is whey protein rather than a blend with another nitrogen source. Protein, composition and release tests · whey protein isolate | Parameter | Method | Release limit | Identification | HPLC protein profile against a reference | Conforms | Protein (dry basis) | Kjeldahl, N × 6.38 | ≥90.0% | Fat | Soxhlet or Weibull–Stoldt extraction | ≤1.0% | Lactose | HPLC or enzymatic | ≤1.0% | Ash | Gravimetric, muffle furnace | ≤3.0% | Moisture | Loss on drying, vacuum oven | ≤5.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh ## Dry basis, the nitrogen factor and the as-is figure The protein result is reported on a dry basis: the laboratory measures the nitrogen in the powder as received, multiplies by 6.38, and divides by the dry matter. At the 5.0% moisture limit a 90.0% dry-basis figure is 85.5% as-is, because the water is part of the mass the label weighs. A lot at 92.0% dry basis with 3.5% moisture is 88.8% as-is, and that is the figure a serving calculation has to use. The factor matters as much as the basis. Milk protein is conventionally calculated at 6.38, which reflects its nitrogen content; the general food factor is 6.25. The same nitrogen result read with the two factors differs by 2.1%, so the certificate should print the factor in the protein row rather than leave it to a note. Kjeldahl measures total nitrogen, not protein, so the figure includes the non-protein nitrogen in the powder. That is why the maxima on a whey isolate certificate do not sum to 100: 85.5% protein as-is at the moisture limit, plus 1.0% fat, 1.0% lactose, 3.0% ash and 5.0% moisture, reaches 95.5%. The remainder is the gap between a nitrogen calculation and a weighed mass. A “true protein” result comes from a precipitation or an amino-acid sum and is not interchangeable with the Kjeldahl figure. ## Release limit and batch result What the result column should contain · whey protein isolate | Parameter | Release limit | Result column | Protein | ≥90.0% dry basis | A measured percentage, with the factor and the moisture | Fat and lactose | ≤1.0% each | Two measured percentages, not one combined figure | Moisture | ≤5.0% | The measured loss on drying for the lot | Heavy metals | Per element | A figure in mg/kg for each of the four elements | Microbiology | Counts and absence | The count and the absence statement for the lot “Passes specification” is a conclusion. The reader should be able to reach it from the numbers: a measured protein with its basis, a measured fat and lactose, the moisture that converts them, a figure per metal, a count plus an absence statement, and the percentage through the sieve. A result column that repeats the limit is a copy of the gate, not evidence about the lot. ## What moves from lot to lot Whey isolate is made by separating protein from whey with ion exchange or microfiltration, then washing, concentrating, pasteurising and spray-drying. Each step leaves a signature. The diafiltration volume moves the lactose and the ash; the separation and the fat removal move the fat; the dryer outlet moves the moisture and the colour; the mill and the sieve move the particle size. Colour is the least quantitative line and the most revealing. Off-white to cream is a wide window, and a shift inside it is not a failure; a powder that darkens noticeably points to a heat load or a Maillard reaction with the lactose, and the protein figure can still pass. Solubility is the second functional line: a lot that disperses more slowly or leaves a haze may have been heated longer than the one before it. An instantized lot is not comparable on bulk density or flow with a plain 80 mesh lot. Both can meet the same protein, fat and lactose limits and still fill a sachet differently, so the fill weight should be checked against the form that was ordered. ## When an outside laboratory is worth it Order an independent test for a new source, a first shipment into a regulated market, a disputed result, or a form the supplier's certificate does not prove. The useful panel is not a copy of the certificate: it is the protein profile by HPLC, the amino-acid profile, lactose by HPLC, melamine by LC-MS/MS, the metal panel by ICP-MS and the micro count. Two screens are worth naming. An ELISA for casein or for β-lactoglobulin shows whether the whey source is what it claims, and an amino-acid profile exposes a nitrogen spike that a Kjeldahl figure alone would report as protein. Ask for the detection limit of each screen: “not detected” without a limit is a statement about the method, not about the sample. The sample tested should be the retained sample, and the report should identify the lot. When a result is contested, give the referee the retained sample, the certificate and the specification, and ask for the tests that separate the possibilities rather than a repeat of the same assay. ## What to compare between suppliers Put seven lines side by side: protein with its factor and basis; fat; lactose; ash; moisture; particle size and form; and the pack with its lot code. Two quotations that agree on protein but differ on basis, factor or form are not describing the same powder. Then ask who made the lot and by which route. The catalog limits for this product sit on the whey protein isolate product page; the grade and form differences are on the grade comparison; the concentrate it is often quoted against is on the whey protein concentrate page; the separation is described in the HPLC method note; and the release workflow is on the quality page. ### 02 Whey protein isolate: 90%, 95% and the instantized form URL: https://nutrition.rainwoodbio.com/products/protein-collagen/whey-protein-isolate/grades/ Reviewed: 2026-11-20 Whey protein isolate is sold on two decisions: the protein floor it is released against, and the physical form it arrives in. This catalog releases it at ≥90.0% protein on a dry basis as a plain 80 mesh powder, with instantizing on request; a 95% fraction exists as a separate specification with a tighter protein floor. The floor sets the lactose, fat and ash that come with the protein; the form sets how the powder wets, flows, fills and what the ingredient list has to say. The isolate against the concentrate is a separate question, covered on whey isolate versus whey concentrate. In one lineA whey isolate grade is the protein floor plus the form it is sold in: the 90% and 95% fractions are different specifications, and an instantized powder is a different particle with a lecithin declaration attached. ## Why one name covers several powders Whey is the liquid left after milk is coagulated. The protein is separated from the lactose and minerals by ion exchange, which binds and then elutes it, or by microfiltration and diafiltration, which washes the small molecules through a membrane; both routes end in a pasteurised concentrate that is spray-dried. Where the separation stops decides the protein floor. The floor is not the same as an assay. A release limit of ≥90.0% protein on a dry basis accepts a lot at 90.2% and a lot at 93.5%, and both are legitimately the same grade. What separates suppliers is not the headline but the fat, lactose and ash behind it, the moisture, the particle size and whether the powder was instantized. A purchase order that names “whey protein isolate” without those lines has named a family, not a material. The form adds a second variable. Instantizing is an agglomeration step: fine particles are wetted, gathered into larger porous clusters and dried again, usually with a small amount of lecithin on the surface. The protein does not change. The particle does, and so does the list of what the powder contains. ## The forms side by side Whey protein isolate forms · catalog limits and what a higher-protein fraction changes | Point | Plain isolate, 80 mesh | Instantized isolate | 95% fraction | Protein, dry basis | ≥90.0% (N × 6.38) | ≥90.0% (N × 6.38) | ≥95.0% (N × 6.38) | Protein, as-is at 5.0% moisture | 85.5% | 85.5% | 90.25% | Lactose | ≤1.0% | ≤1.0% | Lower than the 90% floor | Fat | ≤1.0% | ≤1.0% plus the lecithin | Lower than the 90% floor | Ash | ≤3.0% | ≤3.0% | Lower than the 90% floor | Particle size | ≥95% through 80 mesh | Agglomerated, coarser | Agreed per lot | Flow and dust | Free-flowing, dusts on transfer | Less dust, lower bulk density | As for the plain form | Ingredient list | Whey protein isolate (milk) | Plus the lecithin and its source | Whey protein isolate (milk) The last row is the one that reaches the consumer. The lecithin used to agglomerate the particles has to be accounted for in the ingredient list, either as an ingredient or as an emulsifier, and where that lecithin is soy the soy declaration follows it. A label that names an instantized isolate and stops there is incomplete. ## Particle, bulk density and behaviour in water An 80 mesh isolate is a fine powder: at least 95% of it passes a 0.177 mm sieve. It pours well, but it makes dust on a filling line and it wets slowly when it is dumped into water, forming lumps that need shear to break. An instantized powder is built from clusters several times larger, with air inside them. The clusters wet through and sink before the protein hydrates, which is why an instantized shake mixes with a spoon. The same agglomeration lowers the bulk density. A kilogram of instantized powder occupies more volume than a kilogram of the plain form, so a 25 kg drum may be filled by volume before it reaches 25 kg, and a scoop sized on the plain product will under-dose the instantized one. Neither point is visible on a certificate. In water the plain isolate disperses to a slightly opalescent solution, and it is least soluble between pH 4.5 and 5.0, near the isoelectric points of the whey proteins. Above about 70 °C the globular proteins begin to unfold, and a long hold near 90 °C can haze or gel the solution. Foam is the third property a filler notices: an isolate foams less than a concentrate, but an instantized powder that wets fast can still entrain air. ## What the form does to the dose Dose arithmetic starts from the as-is protein. At the moisture limit the 90% isolate carries 85.5% protein as-is, so 25 g of protein needs 25 ÷ 0.855 = 29.2 g of powder. The 95% fraction at the same moisture carries 90.25% as-is and needs 25 ÷ 0.9025 = 27.7 g. The difference is 1.5 g of powder per serving, and most of it is the ash and lactose the tighter fraction has already removed. That arithmetic also explains which format suits which grade. A 25 g protein dose is 29.2 g of isolate, or 59 capsules at a 500 mg fill before any excipient, which is why an isolate belongs in a stick, a drink or a bar. ## What to write into the specification - “Whey protein isolate, spray-dried, bovine milk source, CAS 84082-51-9.” - “Protein ≥90.0% on a dry basis by Kjeldahl, N × 6.38; moisture ≤5.0% by loss on drying.” - “Fat ≤1.0%; lactose ≤1.0%; ash ≤3.0%, each as a release limit rather than a typical value.” - “Form: 80 mesh powder, ≥95% through 80 mesh by sieve; or instantized, with the lecithin and its source named.” - “Heavy metals and microbiology as listed on the product page.” - “Milk allergen statement, and the country of origin of the milk.” The COA page shows how these lines appear on a certificate, and the HPLC method note describes the protein profile behind the identity line. ## When a different grade is the right one The 95% fraction is the wrong purchase when the formula does not need the extra five points: it is a tighter separation, quoted as its own specification, and a 90% lot is not a substitute for it. The instantized form is the wrong purchase when the product is a clear ready-to-drink and foam is a problem, when the drum is filled by volume on a line that was set up for the plain powder, or when the label cannot carry a soy declaration. The plain 80 mesh powder is the wrong purchase when the customer mixes in a shaker without shear, or when dust in the filling room is a safety issue. The hydrolysate is a different product, not a grade: the protein is partly broken into peptides, which changes the taste and the osmolality, and the certificate carries a degree of hydrolysis. None of the three is settled by the protein percentage alone. The product page carries the catalog limits, the whey protein concentrate page carries the other grade of the family, and the quality page describes how a lot is released against either specification. ### 02.1 Whey isolate vs whey concentrate: protein, fat, lactose and the label URL: https://nutrition.rainwoodbio.com/products/protein-collagen/whey-protein-isolate/grades/whey-isolate-vs-whey-concentrate/ Reviewed: 2026-11-20 The isolate and the concentrate start from the same whey and stop at different points, and the difference reaches the label before it reaches the glass. This catalog releases whey protein isolate at ≥90.0% protein on a dry basis with ≤1.0% fat and ≤1.0% lactose, and whey protein concentrate 80 at ≥80.0% protein with ≤6.0% fat and ≤5.0% lactose. At a serving that delivers 25 g of protein those ceilings become 0.29 g or 1.97 g of fat and 0.29 g or 1.64 g of lactose, and the ingredient name, the panel and the serving weight follow from that. In one lineThe isolate and the concentrate differ by ten points of protein, five of fat and four of lactose on the same dry basis, and those gaps reach the label as a different ingredient name, a different panel and a different serving weight. ## The four numbers on one basis Every figure below is a release limit on a dry basis, apart from the moisture and the as-is protein. Two suppliers can only be compared on the same basis; the commonest error is to set an as-is isolate figure against a dry-basis concentrate figure. Whey protein isolate and whey protein concentrate 80 · catalog limits | Point | Whey protein isolate | Whey protein concentrate 80 | Protein, dry basis (N × 6.38) | ≥90.0% | ≥80.0% | Protein, as-is at 5.0% moisture | 85.5% | 76.0% | Fat | ≤1.0% | ≤6.0% | Lactose | ≤1.0% | ≤5.0% | Ash | ≤3.0% | ≤4.0% | Moisture | ≤5.0% | ≤5.0% | Protein-to-lactose ratio at the limits | 90 : 1 | 16 : 1 The last row is the most useful line in the table. It holds whatever the lot, and it collapses at once when a powder is diluted with whey powder, permeate or lactose — which is why the ratio belongs in a specification. ## What the fat and the lactose do in the product The concentrate's extra fat and lactose are not impurities; they are what the powder is. In water they make an opaque, milky dispersion that carries flavour and body and foams when pumped or poured. The isolate disperses to a slightly opalescent solution with less foam, which is why a clear ready-to-drink product is built on it. Lactose is the reactive half of the pair. It is a reducing sugar, and in a moist, warm matrix — a bar above all — it reacts with the lysine on the protein and browns and hardens the product over the shelf life. The isolate's 1.0% ceiling removes most of that substrate but not all of it, and the bar's own sugars are still there, so the isolate lowers the rate rather than stopping the reaction. In a dry powder, lactose also takes up water, crystallises and sets the powder into lumps. The fat brings the other half: mouthfeel and flavour carry-over, but also a faster loss of freshness, because a fat at ≤6.0% can oxidise where an isolate at ≤1.0% has little to oxidise. Ash follows the separation route, so two isolates at the same protein can differ on ash. ## The serving arithmetic A label promise is made in grams of protein, so the powder mass is where the calculation starts. At the moisture limit the isolate carries 85.5% protein as-is and the concentrate 76.0%, so 25 g of protein needs 25 ÷ 0.855 = 29.2 g of one and 25 ÷ 0.76 = 32.9 g of the other. The extra 3.7 g carries every other line in the table with it. What 25 g of protein carries at the catalog limits | Per 25 g protein | Isolate | Concentrate 80 | Powder needed | 29.2 g | 32.9 g | Fat, at the limit | 0.29 g | 1.97 g | Lactose, at the limit | 0.29 g | 1.64 g | Ash, at the limit | 0.88 g | 1.32 g | Protein share of the powder's energy | About 96% | About 80% For a bar or a flavoured shake those numbers are small. For a clear drink, a tight carbohydrate declaration or a serving weight with no room left, they decide the grade. The energy row is what a claim review reads: both powders clear a high-protein threshold on their own, and the difference appears once the powder is one ingredient among several. ## What the label has to say The ingredient list names the grade, not the family. In the EU, “whey protein isolate (milk)” or “whey protein concentrate (milk)” is the form Regulation (EU) No 1169/2011 calls for, with milk emphasised as an allergen. In the US the same names go into the ingredient statement with the FALCPA milk declaration beside them. A product name that says isolate while the ingredient list says concentrate is a labelling problem that no certificate repairs. The nutrition panel works from the as-is figure, because the panel describes the powder as sold, not dried. At 5.0% moisture the isolate's 90.0% dry-basis protein is 85.5% on the panel, and that is the number a serving or a 100 g column has to show. The nitrogen factor belongs to the same calculation: 6.38 for milk protein, 6.25 as the general default, and a panel that mixes the two with the certificate will disagree by about 2% on the same powder. If the form is instantized, the lecithin that agglomerated the particles is declared with its source, and where that source is soy the soy declaration follows. Instantizing does not change the protein, fat or lactose, but it changes the ingredient list, the bulk density and the scoop. ## The milk allergen does not change Whey protein isolate is a milk-derived ingredient and carries a milk allergen statement on every lot. That statement belongs on the certificate file and on the finished pack, and moving from a concentrate to an isolate does not remove it: an isolate at ≤1.0% lactose still contains milk protein, and the protein is the allergen. Lactose is a different matter: it is a sugar, and a consumer avoiding it is usually avoiding the sugar rather than the protein. “Lactose-free” has no harmonised definition in the EU or the US, so the claim needs a threshold and a method agreed before it is printed, and “dairy-free” cannot sit on a pack that declares milk. Neither the isolate nor a hydrolysate is an allergen-free ingredient. ## What changes when the grade changes Switching from concentrate to isolate means less powder for the same protein, less fat and lactose, a clearer solution and less browning substrate. It also means re-checking the water added for thickness, the scoop volume, the foam on the line and the panel values, all of which were built on the concentrate's mass. The allergen statement is the one line that does not change. Switching the other way brings the fat, lactose and opacity back, and it can be right for a bar that needs mouthfeel or a drink that is meant to be milky. What it must not be is an unannounced substitution: the ingredient name, the panel and the specification move together. The isolate product page carries the catalog limits, the concentrate page carries the other grade, the grade comparison covers the forms within the isolate, the concentrate's own comparison takes the same question from the other side, and the quality page describes how either lot is released. ### 03 Whey protein isolate in the pack, in solution and in the finished product URL: https://nutrition.rainwoodbio.com/products/protein-collagen/whey-protein-isolate/stability/ Reviewed: 2026-11-20 Dry whey protein isolate is one of the more forgiving powders in a warehouse. At ≤5.0% moisture and ≤1.0% lactose there is little free water and little reducing sugar for the protein to react with, so a sealed pack at room temperature holds its protein figure for a long time. The failure modes are moisture uptake and caking, a heat load that denatures the protein, and solution — where pH, heat and time act together. The pack decides how fast each one acts. In one lineA sealed whey isolate pack keeps its protein figure; moisture uptake, heat and the pH of the solution are what shorten its life, and the pack decides how fast they act. ## The powder: moisture, caking and colour The catalog sets moisture at ≤5.0%. That is a release gate, not a storage plateau. Protein binds water, and above roughly 8% moisture the particles begin to stick; a pouch opened in a humid room and folded shut will reach that before its retest date. The lactose matters here even at ≤1.0%, because spray-dried lactose is amorphous: it takes up water, then crystallises, releasing the water it held and setting the powder into lumps. An isolate with less lactose is slower to do this, not immune to it. Colour is the visible indicator. Off-white to cream is the release window, and a cream that darkens in store points to a Maillard reaction between the lactose and the lysine on the protein. The available lysine falls before the Kjeldahl figure does, which is why a browning risk is tracked with appearance and, where the matrix is warm or moist, a lysine or furosine result rather than protein alone. Heat accelerates both processes but rarely damages the dry powder at warehouse temperatures. What heat does to a sealed pack is small; what it does to a pack that is also damp is not. A pallet stored against a sunlit wall, or a drum left in a loading bay, combines the two. ## The solution: heat, pH and time In water the isolate disperses to a slightly opalescent solution. Once dissolved, the protein is exposed to heat, pH and oxygen at the same time. Above about 70 °C the globular proteins unfold; a short pasteurisation is tolerable, while a long hold near 90 °C can gel the solution or leave a sediment that no homogeniser will remove. The least soluble window is pH 4.5 to 5.0, close to the isoelectric points of β-lactoglobulin and α-lactalbumin, so an acidic drink avoids that range or is stabilised through it with a hydrocolloid or a buffer. A whey solution's shelf life is settled by microbiology as much as chemistry. Dissolved protein feeds bacteria readily, and a hold tank at room temperature carries a risk absent from the dry bag. If a liquid cannot be avoided, fix the hold period, the temperature and the kill step or preservative, then validate the drink. Powder data cannot stand in for beverage data: the formula, the thermal process and the container each shift the rate. ## What drives the change Factors that move whey protein isolate during storage | Factor | What it does | Control | Moisture | Caking, lactose crystallisation, loss of flow | Sealed moisture-barrier pack; dry store | Heat | Denaturation and gelation in solution | Controlled process temperature and hold | pH | Haze and sediment near pH 4.5–5.0 | Formulate away from the window or stabilise | Oxygen | Oxidation of the residual fat; off-flavour | Low headspace; sealed pack; antioxidant where allowed | Light | Off-flavour and colour drift in a clear liquid | Opaque pack; amber or foil container | Metal ions | Oxidation catalysis and discoloration | Avoid iron and copper contact | Shear and foam | Air entrainment; surface denaturation | Low-shear transfer; defoamer where allowed | Microbiology | Growth in a reconstituted solution | Hold-time and temperature control These act together rather than one at a time. Moisture and warmth reinforce each other, and a clear bottle of near-neutral whey drink adds light, oxygen and time to both. The useful question is not whether the isolate survives but under what pack, what condition and what duration — three answers that belong together. ## A stability protocol for the ingredient Every study worth citing states four things up front: the pack, the condition, the sampling points and the tests. The warehouse case for a whey isolate is normally 25 °C/60% RH, with 30 °C/65% RH as the intermediate arm; 40 °C/75% RH stresses the pack. Add a light-exposure arm wherever clear packaging is planned, since a dark incubator can never reveal that failure mode. At each pull point, measure protein by Kjeldahl with the nitrogen factor recorded, moisture by loss on drying, fat, lactose, ash, appearance, dispersibility and the microbiological set. Bars need water activity and texture added; drinks need pH, clarity and a sensory panel; stick packs need the seal examined, not only the powder. Report the individual values rather than a bare pass line, and tie each table to a named pack and lot family. Request the study run on the container you actually intend to order. A 25 kg fibre drum and a 1 kg foil pouch differ in headspace, opening frequency and surface-to-volume ratio, so no single data set answers for both. If the only file offered is a bulk figure, use it as a starting point, not an assigned shelf life. ## The finished formula changes the answer A bar is the hardest matrix for this ingredient because it is moist and warm for months. The powder, the syrup and the humectants compete for water, and the lactose and lysine that meet in that water brown the bar and harden it. An isolate with ≤1.0% lactose brings less substrate than a concentrate does, but the sugars in the bar itself remain, so the isolate slows the reaction rather than removing it. A ready-to-drink line stacks heat, pH and light on one another. The isolate is picked for clarity and low lactose, then the process sets the shelf life: hot filling imposes a thermal load the powder never meets, while aseptic filling avoids it but needs a different handling chain. A stick pack gives way at the seal, where one pinhole suffices, so the strip is examined along with the powder. A capsule starts dry, yet its shell and excipients pass water inward to the fill, so moisture and appearance are re-checked after storage. ## How the shelf life is set No single shelf-life figure can be published for whey protein isolate; the container and the way it is stored decide the answer. The assigned retest period appears on the specification and rests on a stability file generated with that same pack. A figure with no container, no storage condition and no test panel behind it is a marketing line, not a shelf life. Once the retest period ends, pull the retained sample and assay it again before any extension. Extension by assumption is not acceptable, and a bulk result cannot be copied to a container repacked elsewhere. Our product hub shows which packs are standard; the COA page sets out release testing; the MOQ page covers pack choices and lead time; the concentrate stability page shows how the sister grade behaves; and the quality page describes the release workflow. ### 04 Whey protein isolate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/protein-collagen/whey-protein-isolate/moq/ Reviewed: 2026-11-20 The MOQ for whey protein isolate is 1 kg, supplied as a 1 kg foil pouch; the bulk pack is a 25 kg fibre drum, and lead time is 1–7 days from order confirmation for the standard form. A firm quotation needs six things: the grade and form, the protein basis, quantity and pack, destination and Incoterm, the documents, and the intended use. We do not publish commercial terms on this page; they are stated on the quotation. In one lineOne kilogram is the smallest order because a trial, a retained sample and an independent test all fit inside it, and the 25 kg drum is the unit a production run is planned on. ## Why the minimum is 1 kg A kilogram of isolate is enough for a bench trial at a realistic protein dose, a retained sample held for the lot's life, and a set of independent tests at a contract laboratory. It also ships as a parcel, which matters when a formulator needs material before a production slot is fixed. The pouch carries a lot code, so the sample and the qualification sit inside one traceable unit rather than at the end of a repack. Below 1 kg the material is split from a larger lot and repacked. That adds handling, replaces the original pack identity with a new one and makes traceability harder, without changing the powder. The 25 kg drum is the bulk unit: it reduces handling per kilogram but commits inventory and a longer storage period. The minimum is a pack decision, not a volume incentive. ## Packs and forms Standard whey protein isolate packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, retained sample, small batch | Moisture barrier; reseal after opening | Fibre drum | 25 kg | Production | Inner liner; lot code on drum and liner | Instantized powder | 1 kg or 25 kg | Shaker and stick-pack filling | Lower bulk density; confirm the fill by volume | Split from a drum | On request | Bench trial under 1 kg | New pack identity; record the lot The catalog form is an 80 mesh powder: ≥95% through 80 mesh. Instantizing or agglomeration is a different physical specification, not a packing choice. It changes the bulk density, so a drum that holds 25 kg of the plain powder may fill by volume before it reaches the weight with the instantized form. Say which form the line will run before the quotation is written, and the pack and the fill weight can be checked together. ## Lead time and dispatch The standard form is quoted at 1–7 days from order confirmation. That window covers picking, document preparation and dispatch; it does not include the shipping transit, customs clearance or the customer's own quality release. An instantized lot, a non-standard pack or a split from a drum adds time, and the quotation should state it as a separate line rather than fold it into the range. Ask for the dispatch date, not only the range. A 1 kg pouch usually moves as a parcel while a 25 kg drum travels on a pallet, and the Incoterm decides who books the freight and who clears entry. The COA, the specification and the rest of the lot documents belong on the same journey as the pack, not in an email after it lands. ## What a quotation needs Six items make a quotation firm enough to compare: - Product and form. Whey protein isolate, CAS 84082-51-9, plain 80 mesh or instantized. - Specification. Protein with its factor and basis, fat, lactose, ash, moisture, particle size, heavy metals and microbiology. - Quantity and pack. 1 kg pouch or 25 kg drum, and the form the line will run. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, specification, SDS, allergen statement and any market-specific declaration the importer needs. - Intended use and market. Supplement, food or another use, and the market where it will be sold. A quotation that names “whey protein isolate” without the form and the basis is incomplete. The same powder can suit one destination and sit outside the file for another, and the documents are part of the offer. ## The sample is a lot, not a demonstration The 1 kg pouch is the qualification sample. Test protein with its factor, fat, lactose, moisture, the metal panel and microbiology before scaling, and keep a retained sample from the same pack. The lot code on the sample, the certificate and the quotation should match. A sample that cannot be traced to a lot is a demonstration. A bench trial that needs 200 g is a repack, not the catalog pouch. It leaves a bulk lot, gets its own handling record and cannot be presented as the 1 kg foil pack. Ask for the split in writing and keep its lot code with the trial results, because the powder on the bench and the powder in the production drum may come from different lots even when the specification is identical. ## Terms to settle before the first order Put the commercial terms and the quality terms on the same page: Incoterm, pack, dispatch window, specification revision, a COA for each lot, the retained sample, the retest period, the allergen statement and the route for a change. Settle those in a quality agreement before the first production order; the same conversation is harder after a dispute. If a lot misses the agreed specification, the route is the retained sample and a joint re-test against the named method, not a photograph of the drum. The agreement should say who pays for the referee laboratory and which laboratory both sides accept. A return decided on appearance alone is hard to defend on either side, and colour is the weakest line to argue from on this product. The product page carries the catalog specification; the COA page lists the release tests; the grade comparison explains the form and the pack; the methods library describes the analytical basis behind each line; and the quality page describes the release file. ### 05 The regulatory file for whey protein isolate URL: https://nutrition.rainwoodbio.com/products/protein-collagen/whey-protein-isolate/compliance/ Reviewed: 2026-11-20 Whey protein isolate is an ordinary food ingredient in the European Union, the United States and the United Kingdom. It is not a novel food, not a regulated additive and not a drug, and no pre-market approval is needed to place it on the market as an ingredient. What decides whether a lot can be used is narrower: the milk allergen declaration, the protein basis behind the panel, and the contaminant limits applied to the product as sold. The buyer's regulatory team confirms the route for the destination. In one lineWhey protein isolate is an ordinary food ingredient; the file turns on the milk allergen declaration, the protein basis behind the panel and the contaminants, not on permission. ## The three checks in the file Check one is status: whether the material may be sold as a food ingredient where it is going, and for whey protein the answer is yes in all three markets. Check two is declaration: milk is an allergen, the ingredient name has to be understood, and the panel figures have to be on the label's basis. Check three is contamination: the heavy-metal and microbiological results have to be converted to the product as sold at the dose taken. Each check has a different owner: status sits with the supplier and the importer, the allergen with the recipe and the label, the contaminant calculation with the food category and the daily dose, and any claim with the brand. The catalog specification and the COA support all three; neither settles a route alone. ## European Union Whey protein isolate is a milk-derived food ingredient. Labelling follows Regulation (EU) No 1169/2011, and milk is on the Annex II allergen list, so the ingredient list must emphasise it — “whey protein isolate (milk)” with milk in bold or capitals is the usual form. The declaration follows the ingredient into every product that contains it, including a capsule or a stick pack; there is no exemption for a supplement. Food supplements fall under Directive 2002/46/EC and the national measures that implement it, which set the notification and labelling route in each member state. Protein on the nutrition declaration is normally calculated as total nitrogen × 6.25 unless a specific factor is used; this specification reports 6.38, the milk-protein factor, and the two readings of the same nitrogen result differ by about 2.1%. The buyer's team confirms which factor the label uses. ## United States In the United States, whey protein isolate is used as a food ingredient and as a dietary ingredient in supplements. The milk declaration is mandatory under FALCPA: the label must state milk, either as “Contains: milk” or in a parenthetical in the ingredient statement. It applies to an isolate with ≤1.0% lactose exactly as to a concentrate, because the allergen is protein, not sugar. A supplement is made under the cGMP rule in 21 CFR 111, which puts the identity, purity, strength and composition of the ingredient under the finished product's quality system. The panel uses 6.25 by default while a specific 6.38 factor exists for milk protein, so the certificate and the panel can differ by about 2% on the same powder; the gap should be understood rather than discovered at label review. ## Contaminants and limits Contaminant limits apply to the finished product as sold, not to the drum. In the EU, lead, cadmium and mercury in food supplements are set by Commission Regulation (EU) 2023/915 as of this review; for a supplement the lot result is scaled to the ingredient's share of the daily portion. Contaminant and microbiology limits to confirm for the finished product | Parameter | Usual supplement reference | What the file should show | Lead (Pb) | 3.0 mg/kg in the product as sold | Lot result, method and the finished-product calculation | Cadmium (Cd) | 1.0 mg/kg in the product as sold | Lot result and any category exception | Mercury (Hg) | 0.10 mg/kg in the product as sold | Lot result and method | Arsenic (As) | Customer or market limit | The agreed limit and the method, stated on the certificate | Melamine | Market-specific, where required | A statement and the limit it was screened against | Microbiology | APC and absence tests | Count, absence statement and the sampling plan Melamine is not part of the catalog release panel: it is a nitrogen-rich adulterant that a Kjeldahl figure reads as protein, so where the market requires a statement the lot is screened separately. The catalog microbiology limits are APC ≤1,000 cfu/g, yeast and mould ≤100 cfu/g, and E. coli and Salmonella absent; a finished product can be tighter and often is. ## Label and claims The allergen declaration is not optional and not a claim. It sits on the pack whatever the marketing says, and no formulation change removes it while the protein is milk-derived. Claims sit in a different review: the brand's reviewer checks the wording against the product, the dose and the market, and a statement about what the protein does in the body is a health claim, not a property of the ingredient. Protein claims are nutrition claims under Regulation (EC) No 1924/2006. In the EU, “source of protein” requires protein to supply at least 12% of the energy value and “high protein” at least 20%; for a supplement the basis is normally the daily portion, which the buyer's team confirms. In the US, “good source” means 10–19% of the Daily Value and “high” at least 20%, against a protein Daily Value of 50 g. No EU health claim is authorised for whey protein as such, and an Article 13 or 14 submission is a separate exercise. Two words deserve care. “Lactose-free” has no harmonised definition in the EU or the US, so a claim needs a threshold and a method agreed in advance, and “dairy-free” should not appear on a pack that declares milk. This site publishes the specification and makes no health claim. ## Documents for the file The file needs the COA with protein on its stated basis, fat, lactose, ash, moisture, the metal panel and microbiology; the specification with its revision number; the TDS and the SDS; and the milk allergen statement, which belongs with every lot. It also needs the origin of the milk and the country of manufacture, a GMO statement, an antibiotic-residue statement for the dairy source, a melamine statement where required, and the lecithin source if the form is instantized. Where a statement is missing, name the gap before the order moves. The product page carries the catalog specification, the COA page shows how each line is reported, and the methods library describes the tests behind them. ## Checklist before the first order - Specification version, CAS and the exact form are named. - The milk allergen statement is on file for the lot, and milk is declared in every finished pack. - Protein is stated with its factor and basis, and the panel's factor is confirmed. - Fat, lactose and ash limits are on the specification, not only in a sales email. - The contaminant results are converted to the finished-product dose. - Claims and the ingredient name have been reviewed for the destination. The quality page describes the release file, and the concentrate compliance page covers the same framework for the other grade of the family. ### 06 How we prove a whey protein isolate lot is the isolate URL: https://nutrition.rainwoodbio.com/products/protein-collagen/whey-protein-isolate/identity/ Reviewed: 2026-11-20 A whey protein isolate lot is what the certificate says when four independent lines agree: the protein profile by HPLC shows β-lactoglobulin and α-lactalbumin in the expected proportion, the protein-to-lactose ratio is the isolate's rather than a concentrate's, the nitrogen comes from protein rather than from an added nitrogen source, and the ash and moisture close the mass balance. The protein percentage alone cannot separate an isolate from a concentrate, a blend or a nitrogen spike. In one lineIdentity is proved by agreement: the protein profile names the whey proteins, the protein-to-lactose ratio separates isolate from concentrate, and the nitrogen has to come from protein rather than from an additive. ## The four identity layers A certificate can name the right material and still fail to prove it. The four layers below are separate questions, and each needs its own evidence. A supplier who answers only the first has described the paperwork, not the powder. Four layers of whey protein isolate identity | Layer | Question | Test | What it proves | Document | Is the material named, with its CAS number? | Name, CAS 84082-51-9, form and grade | Paperwork only | Protein profile | Are these the whey proteins? | HPLC, usually size-exclusion or reversed-phase | The protein family, not the grade | Composition | Is it the isolate and not a concentrate or a blend? | Protein, lactose, fat and ash on one basis | The grade and the ratio | Nitrogen source | Is the protein figure real? | Amino-acid profile; melamine screen | That the nitrogen is protein nitrogen The first layer is where most disputes start, because “whey protein” is a family name. The grade, the form and the protein basis belong on the certificate in the same block as the CAS number, and the lot code has to match the pack, the drum and the retained sample. ## The ratios that separate the grades Bovine whey protein has a characteristic composition: β-lactoglobulin is the largest fraction at roughly half the protein, α-lactalbumin follows at about a fifth, and bovine serum albumin, immunoglobulins and the glycomacropeptide from rennet whey make up the rest. The β-lactoglobulin to α-lactalbumin ratio of about 3:1 is stable across authentic whey isolates, and a profile that departs from it points to a different source, a blend or a fractionation step that was not declared. The second ratio is the commercial one. At its limits this isolate carries ≥90.0% protein and ≤1.0% lactose on a dry basis, a ratio of at least 90 to 1. A concentrate at ≥80.0% protein and ≤5.0% lactose sits at about 16 to 1. Diluting an isolate with whey powder, whey permeate or lactose moves the protein down and the lactose up together, and the ratio collapses long before the protein figure leaves the specification. The protein-to-ash ratio works the same way against a mineral or a salt addition. The third is the mass balance. Protein, fat, lactose, ash and moisture on one basis should leave a remainder of a few points, not a large gap. A certificate where the five lines sum to 88% has 12% of the powder unexplained, and the explanation is usually carbohydrate that was not tested. ## X-ray diffraction and the solid state Spray-dried whey protein is amorphous, so its X-ray diffraction pattern is a broad halo rather than a set of sharp peaks. That makes XRD a useful negative test: a crystalline pattern in a powder sold as an isolate means crystalline lactose, a mineral salt or another crystalline diluent is present, and the pattern identifies which. It is not a protein assay and it does not measure the grade. XRD is not a routine release test for this product, and a certificate that reports only “XRD conforms” without the pattern or the reference has added little. Ask for the reference pattern and the detection limit before reading a match statement, and read the method as the solid-state check that supports the composition data rather than the identity proof on its own. Infrared spectroscopy is the quicker companion: the amide I band near 1650 cm⁻¹ and the amide II band near 1545 cm⁻¹ come from the protein backbone, and the carbohydrate region shows lactose, which is why FTIR and XRD are read together. ## What adulteration looks like Common whey protein isolate substitutions and their signals | Adulterant | What it does | Signal | Test | Whey powder or permeate | Lowers protein, raises lactose | Protein-to-lactose ratio collapses | Protein and lactose on one basis | Lactose or maltodextrin | Bulks the powder; lowers protein | Lactose or total carbohydrate high; ash low | Lactose by HPLC; mass balance | Soy or pea protein | Raises protein from a plant source | Protein profile lacks β-lactoglobulin | HPLC profile; amino-acid profile | Casein or caseinate | Raises protein; changes the source | Casein peak; ELISA positive | HPLC; casein ELISA | Melamine or urea | Inflates the Kjeldahl figure | Protein high, amino acids low | LC-MS/MS; amino-acid sum | Excess moisture | Dilutes every figure as-is | Loss on drying high; dry-basis figure normal | Loss on drying Colour is the weakest signal on this list. Off-white to cream covers a wide range, and a blend can be milled and matched to it. The stronger signals are the protein profile, the ratio and the amino-acid sum, because they depend on what the powder is made of rather than on how it looks. ## How to write identity into the specification - “Whey protein isolate, bovine milk source, CAS 84082-51-9, spray-dried.” - “Protein ≥90.0% on a dry basis by Kjeldahl, N × 6.38; moisture ≤5.0%.” - “Identification by HPLC protein profile against a reference; report the chromatogram.” - “Lactose ≤1.0%, fat ≤1.0%, ash ≤3.0%, each on the certificate with its method.” - “No added lactose, whey permeate, casein or non-protein nitrogen source.” - “Particle size ≥95% through 80 mesh; heavy metals and microbiology as listed.” - “Milk allergen statement and the country of origin of the milk.” ## Five questions for the supplier - Can you send the HPLC protein profile for this lot, not only the protein percentage? - What are the protein, lactose, fat and ash results on the same basis, and what is the remainder? - Is an amino-acid profile available, and does the nitrogen figure reconcile with it? - Which whey was used — cheese whey or acid whey — and was any casein or permeate in the stream? - If the lot is disputed, will you accept a joint re-test on the retained sample? Five direct answers amount to an identity file. A single assay percentage does not. The product page carries the catalog specification, the COA page shows where each figure sits on the certificate, the grade comparison explains the forms, the concentrate page carries the grade this one is most often confused with, and the HPLC method note describes the separation. ### 01 What the COA for creatine HCl actually contains URL: https://nutrition.rainwoodbio.com/products/specialty/creatine-hcl/coa/ Reviewed: 2026-11-20 Creatine hydrochloride is a salt, not a diluted monohydrate, so its certificate has to report two different quantities: the assay of the salt and the creatine content of the powder. A working COA also carries the chloride, loss on drying, identity by HPLC and IR, the 80 mesh result, heavy metals and microbiology. The limits below are the catalog specification; the batch certificate is the record for the pack in hand. In one lineThe assay describes the hydrochloride salt, while the creatine content describes the active fraction; a COA needs both, with chloride and moisture beside them. ## The certificate as a salt report A creatine hydrochloride certificate is read in a different order from a monohydrate certificate. The identity line has to show the hydrochloride, the assay line has to state that it is calculated as the salt, and a separate line has to report the creatine content. If one of those three is missing, the reader cannot tell whether the powder is the declared salt or a blend. The table below is the test panel for this product. Each line needs its method beside the limit; a result column that repeats the limit has recorded the gate, not the measurement. Identity, assay and release tests · creatine hydrochloride | Parameter | Method | Release limit | Appearance | Visual | White to off-white, free-flowing powder | Identification | HPLC retention and IR against a reference | Conforms | Assay, calculated as C4H9N3O2·HCl | HPLC | 99.0–101.0% | Creatine content | HPLC | 74.0–78.0% | Chloride (identity check) | Titration | About 21.2% expected for the 1:1 salt; report the result | Loss on drying | Gravimetric | ≤1.0% | Particle size | Sieve test | ≥95% through 80 mesh | Elemental impurities | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbial load | Colony count with absence checks | Aerobic plate count ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent The IR row supports the form claim that HPLC retention cannot settle: the hydrochloride spectrum differs from the monohydrate and from free creatine. Ask for the spectrum, not only the word “conforms”. ## Assay, creatine content and the chloride arithmetic The molecular weight of creatine hydrochloride is 167.59 g/mol. Creatine accounts for 131.13 g of that mass, or 78.2%, and chloride for about 21.2%. The catalog assay is a salt assay: a 100.0% result means 100 g of hydrochloride in 100 g of powder, not 100 g of creatine. The separate 74.0–78.0% creatine line is what a formulator uses for the active mass. The windows overlap but are not interchangeable. A lot at the top of the assay window and the bottom of the creatine window is worth querying: 100.0% salt should sit near 78% creatine before moisture. Ask whether the creatine figure is on the as-is or dried basis, and use the same basis for both lines. Loss on drying is small here, at ≤1.0%, because this is not a hydrate. The salt is hygroscopic, though, and a result close to 1.0% leaves little room for a humid filling room or an opened pouch. A dried-basis assay without the loss on drying cannot be recalculated as-is. ## Release limit and measured result The limit is the acceptance boundary; the result is what the laboratory obtained. Separate columns, the method and the basis make a certificate auditable. A sheet that reports only “passes” removes the evidence a buyer needs to compare two lots. What the result column should contain · creatine hydrochloride | Parameter | Release limit | Result column | Assay as the salt | 99.0–101.0% | A measured percentage, with the HPLC method and the basis | Creatine content | 74.0–78.0% | A measured percentage, with the calculation shown | Chloride (identity) | About 21.2% expected | A measured percentage and the titrant | Loss on drying | ≤1.0% | A measured percentage | Elemental impurities | Per element | A figure in mg/kg for each element | Particle size | ≥95% through 80 mesh | The measured percentage through the sieve Chloride deserves its own result, not a figure copied from the assay. It is an identity check rather than a catalog limit: 21.2% is the expected value for the 1:1 salt, and the measured result should be read beside the assay. Low chloride with normal creatine points to free creatine or monohydrate, and high chloride to added salt. It is a form check, not a purity score. ## What moves between batches Moisture moves first because the salt is hygroscopic. A pouch opened in a humid room gains water, the loss on drying rises, and the as-is assay falls while the dried-basis figure stays flat. Colour is second: white to off-white is a wide window, and a cream tint can follow drying or a longer hold. Milling and sieving set the 80 mesh result without changing the chemistry. Chloride and pH move together when the salt stoichiometry changes: partial free base reads low chloride and a higher pH, while added chloride reads high chloride and a lower pH. Neither is visible in a nitrogen-based assay, which is why the certificate should name HPLC and titration rather than a generic “assay”. The catalog panel does not carry creatinine or dicyandiamide. That is a statement about the specification, not proof of absence. A buyer whose formula will see heat or water should add both lines, with methods and limits, because neither is inferred from the salt assay. ## When a referee laboratory earns its place Bring in a referee laboratory for an unfamiliar source, a first shipment into a regulated market, a contested form claim, or a result that sits on a limit. The useful panel adds what the routine certificate leaves open: chloride by titration or ion chromatography, pH of a defined solution, IR, HPLC assay and creatine content with peak purity, loss on drying, ICP-MS and micro. Add creatinine, dicyandiamide or XRD only if the specification or the form claim needs them. Request each screen's detection limit: a “not detected” entry without one says more about the method than about the powder. Preserve chain of custody by testing the retained material, and make sure the report carries the same lot code as the pouch or drum. ## Six lines for a supplier comparison Lay out six lines: form and CAS; assay as the salt and its basis; creatine content; chloride; loss on drying; mesh and pack size. Two quotations that agree on a 99% assay but differ on creatine or chloride are not the same powder. Add the metal method and the micro panel; a method-free “conforms” cannot be compared. The second layer is traceability: the certificate should identify the manufacturer, the lot, the pack and the process route, and the code should be the same on the pouch, the drum and the retained sample. The catalog specification sits on the creatine HCl product page. The monohydrate is a different salt with its own product page and its own release lines. The HPLC and titration methods are described in the methods section, and the quality page sets out how a lot is released. The identity page takes the chloride and pH checks further. ### 02 Creatine HCl powder or granulated: choosing a physical grade URL: https://nutrition.rainwoodbio.com/products/specialty/creatine-hcl/grades/ Reviewed: 2026-11-20 Creatine hydrochloride is supplied as an 80 mesh powder, with a granulated version on request. Both carry the same chemical specification — assay 99.0–101.0% as the salt, creatine 74.0–78.0%, chloride near 21.2% and loss on drying ≤1.0% — while the particle-size line changes with the grade. The decision is about flow, dust, bulk density and fill, not a second purity level. In one lineThe grade changes how the powder flows and fills; the hydrochloride identity, assay and creatine content stay the same. ## Why a single salt still has a grade decision Creatine hydrochloride has one identity: the 1:1 salt of creatine with hydrogen chloride, CAS 17050-09-8. There is no hydrate choice to make, as there is with creatine monohydrate. What the buyer can choose is the physical form: the standard 80 mesh powder or a granulated material made from it. That is a processing choice. Milling and sieving set the particle-size distribution; granulation builds larger, denser particles from the fine powder. Neither step changes the assay, the creatine content, the chloride or the loss-on-drying limit. A specification that describes “granulated” as a purity grade has confused the powder with the chemistry. The form question is separate. Creatine monohydrate is a different product with a different CAS number, molecular weight and creatine content; the monohydrate page covers that choice. This page covers the physical grade; the level-four comparison covers the form. ## The two catalogued grades Physical grades of creatine hydrochloride | Property | 80 mesh powder | Granulated, on request | Description | White to off-white, free-flowing powder | Agglomerated or compacted granules from the same powder | Particle size | ≥95% through 80 mesh | Granule cut agreed with the buyer; fines content stated | Flow | Good for a fine powder; can bridge in a narrow hopper | Usually freer and more uniform in a hopper or feeder | Dust | Higher; needs extraction at the filling head | Lower; less powder on seals and surfaces | Wetting | Fast; disperses with stirring | Slower; granules must break down before they dissolve | Bulk density | Lower and more variable with fines | Higher and more consistent | Typical fit | Stick packs, drink mixes, dry blends, small capsule runs | High-speed capsules, tablets, blends that segregate | What to confirm | Sieve standard and percentage passing | Granule cut, fines, binder or water-only process The granulated grade is not automatically the better one. It buys flow and dust control at the cost of a slower wetting step, and it adds a processing operation that has to be specified and sampled. The powder is the simpler choice when the line can handle a fine, static-prone material. ## Flow, bulk density and the moisture barrier Flow is the first property the line notices. An 80 mesh hydrochloride powder is fine and slightly hygroscopic; in a humid room it can pick up water, cake at the surface and bridge in a hopper. Granulation reduces the surface area per gram and usually improves flow, but it does not make the salt non-hygroscopic. The pack and the room still decide how much water the powder meets. Bulk density follows the same pattern. A fine powder traps more air and fills a capsule by volume with less mass; a granulated powder packs more densely and gives a more consistent fill. That matters more for the hydrochloride than for the monohydrate, because a gram of hydrochloride carries less creatine. A low bulk density and a low creatine fraction compound the fill problem. The acid is a separate handling point. The powder dissolves to an acidic solution, and the dry dust is irritating to the eyes and airways in the same way as other fine acidic salts. Local exhaust, eye protection and a clean filling head belong in the handling plan. Granulation lowers the dust but does not remove the acidity from the solution. ## What the grade does in a capsule, tablet or stick A capsule fills by volume, so bulk density and powder volume decide the fill before the label does. A 500 mg fill of hydrochloride at 78% creatine delivers about 390 mg of creatine; the same fill of monohydrate delivers about 440 mg. A formulator matching a creatine dose therefore needs more hydrochloride mass, and a granulated grade can help fit that mass into a consistent fill without weight variation. In a tablet, the granulated grade is usually the easier starting point: it flows into the die, resists segregation from fine excipients and compacts more evenly. The acidic salt can also interact with acid-sensitive excipients or coatings, so the formulation check is not only a flow check. Direct compression is the simpler route; a wet granulation step adds water and heat, which is the condition the salt is least suited to. For a stick pack or drink mix, the 80 mesh powder is the usual choice because it wets quickly. The granulated grade may need more stirring and can leave a gritter mouthfeel if the granules do not break down. Test the actual drink at the target pH and temperature, not only the powder in a beaker. A grade that disperses well in water can still fail in an acidic, warm matrix. ## What to write into a grade specification - “Creatine hydrochloride, CAS 17050-09-8, C4H9N3O2·HCl; single salt, no monohydrate or diluent.” - “Assay 99.0–101.0% as the salt by HPLC; creatine content 74.0–78.0%; chloride by titration.” - “Loss on drying ≤1.0%; heavy metals and microbiology as catalogued.” - “80 mesh powder: ≥95% through 80 mesh, sieve standard named.” - “Granulated: granule cut and fines content agreed; method (water-only or binder) declared.” - “Bulk density target and flow test agreed where the filling line depends on them.” The chemical block should not change when the grade changes. If a granulated offer carries a different assay, creatine content or loss-on-drying limit, it is a different specification, not the same product in a coarser form. Ask for the granulation method and any processing aid, because a binder is an added ingredient and belongs on the documentation. ## When not to change grade If the powder runs on the line, meets the fill target and disperses as the finished product needs, a grade change adds a processing step and a new qualification without improving the product. A finer or granulated powder does not raise the creatine content, make the solution less acidic or turn the salt into the monohydrate. If the problem is caking, creatinine or a pH shift, the answer is in the pack, the storage or the formula, not the sieve. The catalog specification sits on the creatine HCl product page. The level-four comparison sets the hydrochloride against the monohydrate; the COA page shows where the grade sits on the certificate; the stability page covers moisture and acid. The methods section explains the sieve and titration work, and the quality page describes release. ### 02.1 Creatine HCl vs creatine monohydrate: solubility, creatine content and fill URL: https://nutrition.rainwoodbio.com/products/specialty/creatine-hcl/grades/creatine-hcl-vs-creatine-monohydrate/ Reviewed: 2026-11-20 Creatine hydrochloride and creatine monohydrate are different solids: the hydrochloride is the 1:1 salt, CAS 17050-09-8, 167.59 g/mol, with about 78% creatine; the monohydrate is the hydrate, CAS 6020-87-7, 149.15 g/mol, with about 88% creatine. The hydrochloride is freely soluble and acidic; the monohydrate is sparingly soluble and closer to neutral. For the same creatine dose, the hydrochloride needs more powder, so the fill and the capsule count change. In one lineThe hydrochloride carries about 78% creatine and dissolves freely; the monohydrate carries about 88% and dissolves sparingly, so the same creatine dose is a different weight and a different fill. ## Two names, two identities The hydrochloride is creatine with one equivalent of hydrogen chloride; the monohydrate is creatine with one molecule of water in the crystal. Neither is a diluted or “purer” version of the other: they are different solids with different molecular weights, counter-ions and label names. Creatine hydrochloride and creatine monohydrate | Property | Creatine hydrochloride | Creatine monohydrate | CAS number | 17050-09-8 | 6020-87-7 | Formula | C4H9N3O2·HCl | C4H9N3O2·H2O | Molecular weight | 167.59 g/mol | 149.15 g/mol | Creatine content | About 78.2% theoretical; catalog 74.0–78.0% | About 87.9% theoretical | Counter-ion or water | Chloride, about 21.2% | Water of crystallisation, about 12.1% | Water solubility | Freely soluble | Sparingly soluble, about 13 g/L at room temperature | Solution pH | Acidic | Closer to neutral | Loss on drying | ≤1.0% | ≤12.0% | Label name | Creatine hydrochloride | Creatine monohydrate The loss-on-drying row is not a purity ranking: the monohydrate's water is part of its identity, while the hydrochloride's low LOD reflects the absence of water of crystallisation. ## Solubility: the real separation The hydrochloride dissolves readily in water. The monohydrate is sparingly soluble, roughly 13 g/L at room temperature, a limit that shapes the dosage form: a 5 g creatine dose as monohydrate is about 5.7 g, a large fraction of what a litre can dissolve, let alone a 300 mL bottle. The hydrochloride reaches the same dose in a much smaller volume. Solubility is not absorption. A salt that dissolves faster in a beaker does not automatically deliver more creatine to muscle, and a claim of better absorption needs its own evidence. What the difference does establish is a formulation choice: a clear, concentrated drink is easier with the hydrochloride, while a capsule or tablet can use either form. The acid is the trade-off. The hydrochloride solution is acidic, which affects flavour, acid-sensitive ingredients and the rate at which creatine cyclises to creatinine. The monohydrate is closer to neutral but cannot reach the same concentration. The choice is between a solubility constraint and an acid constraint, not between a good and a bad powder. ## Creatine content and the dose arithmetic The label dose is usually written as creatine, not as the salt, so the conversion is part of the formulation. At 78% creatine, 1 g of hydrochloride carries 780 mg; at 74%, 740 mg. The monohydrate at about 88% carries 880 mg per gram. The 99.0–101.0% catalog assay is a salt figure and must not be used as the creatine content. For a 5 g creatine dose, the hydrochloride needs about 6.4 g at 78% or 6.8 g at 74%; the monohydrate needs about 5.7 g. The same label dose means a different powder mass, scoop volume and capsule count. Powder mass for the same creatine dose · label arithmetic, not a dose recommendation | Creatine dose | Creatine HCl at 78% | Creatine HCl at 74% | Creatine monohydrate at 88% | 3 g | 3.85 g | 4.05 g | 3.41 g | 5 g | 6.41 g | 6.76 g | 5.68 g The range across the hydrochloride window is real: a lot at 74.0% needs about 5% more powder than one at 78.0% for the same dose. That is why the certificate's creatine line matters to the fill, and why a supplier's “99%” assay does not answer the question. ## What changes in the capsule, tablet or stick Because a capsule fills by volume, both bulk density and creatine content set how much creatine fits. A 500 mg fill of hydrochloride at 78% delivers about 390 mg of creatine; the same fill of monohydrate delivers about 440 mg. For 1 g of creatine, the hydrochloride needs roughly 1.28 g at 78%, or 1.35 g at 74%, against about 1.14 g of monohydrate. That can change the capsule size or how many capsules make a serving. It also makes flow and bulk density more important: a fine hydrochloride powder may need a larger capsule or a granulated grade for a consistent fill. The monohydrate's higher creatine fraction gives it more room in a small capsule, despite its lower solubility. For a stick pack or drink mix, the hydrochloride's solubility usually outweighs its lower creatine fraction: the powder dissolves in a smaller volume and the drink can be clear. The cost is the acid and the need to validate the matrix: measure creatine and creatinine in the finished drink at the target pH and heat load, because a bulk-powder result does not transfer. In a tablet, either form can work, but the hydrochloride's acidity and hygroscopicity belong in the excipient and coating check. The grades page covers the powder and granulated options within the hydrochloride. ## What the label has to say The label must name the form. “Creatine” alone is ambiguous when the powder is a salt; the ingredient list should say creatine hydrochloride, and the declared mass should tie to the creatine content the form carries. A 6.4 g hydrochloride dose at 78% delivers 5 g of creatine, and the label arithmetic should show which number is declared. The regulatory route is form-specific. The EU novel-food consultation that records creatine monohydrate as consumed before 1997 is attached to the monohydrate; the hydrochloride has its own CAS and counter-ion, and its status must be confirmed. In the US, the monohydrate's history and any GRAS conclusion do not automatically cover the hydrochloride, and a new form can raise an NDI question. The compliance page sets out the file. Claims are separate. “More soluble” is a physical property; “absorbs better” is a claim and needs evidence. No disease claim is available in either market. This page describes the specification and the arithmetic, not a health claim. ## When to choose which Choose the hydrochloride for a concentrated solution, a clear drink or a small volume where the formula can tolerate acidity. Choose the monohydrate for a capsule, tablet or dry blend, a neutral solution, or the higher creatine fraction. Do not switch forms on a certificate alone. A change moves the molecular weight, creatine content, solubility, pH, label name and regulatory file. Run the fill or dispersion trial, check finished-product stability, and update the specification and label together. The catalog specification is on the creatine HCl product page; the monohydrate is on the creatine monohydrate page. The COA page shows the salt and creatine figures, and the identity page gives the separating tests. The methods section explains the HPLC and titration, and the quality page describes release. ### 03 Creatine HCl stability: moisture, acid and the creatinine route URL: https://nutrition.rainwoodbio.com/products/specialty/creatine-hcl/stability/ Reviewed: 2026-11-20 Creatine hydrochloride is hygroscopic and acidic. A sealed, dry powder is stable, but moisture plus heat, or a solution, gives creatine a route to creatinine. The retest period therefore follows the pack and the matrix; the certificate alone cannot supply it. In one lineThe hydrochloride is stable as a sealed dry solid; once moisture and acid meet, creatine moves to creatinine and the pack can no longer hold the specification. ## The dry powder and its moisture barrier The ≤1.0% loss-on-drying limit is a release gate, not an allowance for storage. This salt attracts water, so an opened pouch in a humid room takes moisture at the surface: lumps appear, the LOD climbs and the as-is assay drops while the dried-basis result barely moves. The foil is the barrier and the heat seal is where it fails. Once a pouch has been opened and folded, it is no longer the sealed pack that was tested. If the remainder will be held, move it to a smaller dry, opaque container, or keep it in the original pouch only for the defined in-use period. A desiccant helps in a damp store but cannot compensate for a leak. The fiber drum depends on its liner. Close the liner, keep the drum off a wet floor and record when it was opened. A drum sampled repeatedly has a different headspace history from a sealed pouch, and its retest period should reflect that. ## The solution is the harder format The salt dissolves readily, which is why it suits a stick pack or a drink mix. The resulting solution is acidic, and acidity is one of the factors that changes creatine into creatinine. Heat accelerates the change, so a hot-filled liquid can lose more creatine than a powder mixed just before use. A clear drink at a useful creatine dose is easier with the hydrochloride than with the sparingly soluble monohydrate, but solubility is not stability. Matrix pH, process heat and storage temperature all act on the molecule, and the creatinine figure has to be measured in the drink itself. Data from the bulk powder does not answer the beverage question. The acid also reaches the rest of the formula: a low-pH drink can shift flavour, change the colour of acid-sensitive ingredients and alter the behaviour of a coating or buffer. If the formula cannot accept that acidity, the monohydrate is the more neutral starting point, with its own solubility ceiling. ## What drives the change Factors that move creatine hydrochloride during storage | Factor | Effect | Control | Moisture | Adds a water phase and raises loss on drying | Sealed pouch; dry room; intact liner | Temperature | Speeds the change, particularly in solution | Cool storage; challenge the heat step | pH | Acidity is one variable in the cyclisation rate | Measure the matrix pH; validate hold time | Time | Conversion accumulates at ambient temperature | Set retest and shelf-life dates | Opening | Each opening exchanges humid air | Single-use packs; reseal and date The factors interact: a warm, damp store is worse than either alone, and a warm acidic drink combines them. The useful question is not general stability, but stability in a defined pack, at a defined pH and temperature, over a defined time. ## A stability protocol for the ingredient and the formula Use three released lots in the commercial pack. Hold one at 25 °C/60% relative humidity and one at 40 °C/75%, adding 30 °C/65% if the market asks for it. At 0, 3, 6 and 12 months test salt assay, creatine content, chloride, LOD, appearance, pH, microbiology and, if specified, creatinine. Keep a real-time arm at the labelled condition; accelerated data screens a pack, it does not grant a shelf life. For a finished formula, test the matrix. A beverage arm should cover target pH, heat process and pack, from zero to the claimed shelf life. Measure creatine and creatinine together and record pH at each point, because a pH shift can matter as much as a temperature shift. A stick pack, capsule or tablet needs a unit-level test, since moisture ingress and local water activity are the failure modes the consumer sees. The report should give individual results, identify the pack and lot family, and name the methods. A summary that says “stable” without numbers is not a stability file. ## What the finished formula does to the salt A capsule or tablet starts dry, yet moisture can still migrate from the shell or the excipients into the fill. The hydrochloride is hygroscopic enough to take it, and an acidic fill can react with an acid-sensitive excipient or coating. Check the fill's LOD and appearance after storage, not only the bulk powder. Direct compression avoids the water and heat of wet granulation. A stick pack usually fails at the seal: a pinhole lets humid air in and the powder cakes before the assay moves. Inspect the strip as well as the powder, and test the finished unit at the same points as the bulk. A drink adds pH, heat and time; bulk stability is only the starting point. The pack is part of the formula: a good foil seal protects the powder, while a poor stick seal or an opened liner does not. The MOQ page describes the standard packs and opening discipline. ## Assigning the retest period There is no universal shelf life for creatine hydrochloride; pack and storage condition determine it. The specification states a retest period, and the stability file for the pack supports it. Without those three inputs — pack, condition and test panel — a figure is just a number. A pouch and a drum do not inherit each other's data, and a repacked container inherits neither. Opening a pack ends the original retest period. Close it again, protect it from moisture and finish it inside the defined in-use window. After the retest date, re-assay the retained sample before extending use. A creatinine result at the end matters as much as the salt assay, because the assay can hold while the active creatine fraction falls. Catalog figures are on the creatine HCl product page; the COA page covers release and the MOQ page the packs. The monohydrate page and its stability page give the contrast. The methods section explains the HPLC and titration, and the quality page describes release. ### 04 Creatine HCl: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/specialty/creatine-hcl/moq/ Reviewed: 2026-11-20 Creatine hydrochloride starts at 1 kg in a foil pouch, moves to 25 kg fiber drums for production, and the standard 80 mesh powder carries a 1–7 day lead time. Because the salt is hygroscopic, the seal matters as much as the shipping label. A comparable quotation needs six pieces of information. In one lineThe kilogram pouch is a released-lot sample and the 25 kg drum is the production unit; both rely on a seal that keeps moisture out. ## Why the minimum is 1 kg One kilogram supports a bench trial, an in-house identity check, a small batch and a retained sample. It ships as a parcel, which is useful when a formulator needs material before the production date is fixed. The pouch comes from a released lot and carries its own code; it is not a retail pack or a scoop from a drum. Test the kilogram for the hydrochloride-specific lines: salt assay, creatine content, chloride, loss on drying and the pH of a defined solution. Add a fill trial for capsules or a stick pack. A sample that passes the COA but fails the fill target has still paid for itself, because the problem appears before a drum is ordered. The 25 kg drum is the production unit. Handling per kilogram falls, but inventory and storage time rise, and the barrier is an inner liner rather than a heat-sealed foil. A granulated grade can carry a higher minimum because the run has to be set and the cut verified; confirm that before assuming 1 kg. ## Packs and the moisture barrier Standard packs · creatine hydrochloride | Pack | Net weight | Use | Checks | Foil pouch | 1 kg | Trial, sample, small batch | Foil build, heat seal, lot label, desiccant if any | Fiber drum | 25 kg | Production, blending, repack | Liner, closure, lot code, pallet pattern | Granulated powder | On request | Flow and dust control | Granule cut, fines, binder or water-only process The pouch is the moisture barrier, while the drum is the handling unit. A drum is not a scaled-up pouch: its liner, lid and headspace determine how the powder survives stacking and a humid warehouse. Ask for the liner specification and a seal check before the first drum is dispatched. Once a pouch or drum is opened for sampling, it no longer matches the pack that generated the stability data. In production, close the drum between uses, reseal the liner and write down the opening date. For a small batch, use the pouch within its in-use period instead of leaving it open. ## Lead time and dispatch The standard 80 mesh powder is quoted at 1–7 days from confirmation. Picking, labelling, batch documents and dispatch sit inside that window; freight, customs and the customer's quality release do not. Granulation adds a processing step and a size check, and a new specification adds a review, so neither is automatically inside the range. Ask for a dispatch date as well as the range. A pouch moves as a parcel, a drum as a pallet, and the Incoterm allocates freight and entry clearance. The COA and the rest of the lot pack should move with the material, not arrive later. The clock starts when the order, specification and documents are agreed. An inquiry does not reserve stock, and a purchase order issued before the specification is signed can push the dispatch date. ## What a quotation needs Six fields make offers comparable: - Product and form. Creatine hydrochloride, CAS 17050-09-8, with the salt written out rather than “creatine”. - Specification. Salt assay, creatine figure, chloride, moisture, mesh, elemental panel and micro. - Quantity and pack. Pouch and drum counts (1 kg or 25 kg), or a granulated variant with its cut and fines. - Destination and Incoterm. The country, the port or delivery address, and the Incoterm. - Documents. Lot COA, agreed specification, SDS, allergen and GMO declarations, plus any record the market requires. - Intended use and market. The category — supplement, food or other — and the country of sale. An offer that omits the market or the salt form is incomplete. A powder that suits one market can be outside the file for another; the documents are part of the purchase. Commercial terms sit in the quotation; this page does not carry them. ## A qualification sample, not a demo The kilogram is the qualification sample. Ask for its lot code, COA and draw date; check identity, assay, creatine content, chloride and loss on drying, then run a fill or dispersion trial on your own equipment. Keep part of it sealed in case the production lot is disputed. A sample with no lot code is a demonstration, not a qualification. A bench trial below 1 kg is a repack from a bulk lot, with its own handling record, and it should not be presented as the catalogued pouch. Get the split in writing and keep its code with the trial results. Bench material and production material can be different lots, each within specification. ## What to settle before the first order Put commercial and quality terms on a single page: Incoterm, pack, dispatch window, specification version, a COA per lot, retained sample, retest period, storage wording and change route. Put them into a quality agreement before the first production order; negotiating after a dispute is harder. When a lot misses the agreed specification, the retained sample goes to a joint re-test by the named method; a drum photograph proves nothing. The agreement should allocate the referee laboratory's fee and name the laboratory that both parties accept. A return based on appearance alone is hard to defend when the colour window is wide. Catalog figures are on the creatine HCl product page; the COA page lists the release tests; the stability page covers the moisture barrier; the creatine monohydrate page shows the other form. The methods section explains the chloride titration and HPLC, and the quality page describes release. ### 05 The regulatory file for creatine HCl URL: https://nutrition.rainwoodbio.com/products/specialty/creatine-hcl/compliance/ Reviewed: 2026-11-20 Creatine hydrochloride is a separate salt, not a variant name for creatine monohydrate. Its CAS number, counter-ion and creatine fraction differ, and the monohydrate's novel-food consultation and US history cannot simply be carried across. The destination route belongs to the buyer's regulatory team; this page sets out the evidence and checks that support it. In one lineThe hydrochloride is a separate salt with its own CAS number, counter-ion and regulatory file; the monohydrate's history does not automatically travel with it. ## Four layers, one folder A hydrochloride folder has four parts: the agreed specification, the lot release certificate, the destination's limits and labelling rules, and a change record for source, process and pack. The COA describes the lot, the technical data sheet carries the specification, and the SDS addresses handling. None of those settles the market route, which is recorded separately. “Permitted” is not “approved”. Food-supplement ingredients do not receive a medicine-style pre-market authorisation in any of the markets below; the brand owner remains responsible for the finished product, and the supplier supplies evidence rather than permission. The notes reflect this review, and the current legal text governs. ## European Union: the salt needs its own route Directive 2002/46/EC sets the EU food-supplement framework, but Annexes I and II list vitamins, minerals and permitted forms; creatine is outside both. It therefore follows the national “other substance” route, where a member state may permit it under general food law and notification rules. The hydrochloride is a distinct salt, so the route must be checked for the form and the country. The UK is not one file either: Great Britain has its own supplement rules and claims register, while Northern Ireland applies the EU regime; the delivery address decides. The Commission's novel-food consultation records the monohydrate as consumed before 15 May 1997, so that form is not novel. The conclusion belongs to the monohydrate, not to every creatine salt. Because the hydrochloride has a different CAS number and counter-ion, the EU novel-food catalogue must be searched for that exact form; if no entry covers it, the buyer's team must establish the route before launch. Four instruments surround the route: Regulation (EC) No 178/2002 (general food law), Regulation (EU) 2023/915 (contaminants), Regulation (EU) No 1169/2011 (food information) and Regulation (EC) No 1924/2006 (claims). The annexes and the claims register are amended, so use the current consolidated text. ## United States: a dietary supplement with a form question Under DSHEA, creatine hydrochloride is sold as a dietary supplement. Manufacturing is subject to the cGMP regulation in 21 CFR 111, and the Supplement Facts panel declares the amount per serving with the other ingredients. Write the form out as creatine hydrochloride rather than “creatine”; the salt and the monohydrate are different label ingredients. The monohydrate's long US marketing history does not settle the hydrochloride's position. A different form, source or process can raise a new-dietary-ingredient question, and a GRAS conclusion for the monohydrate covers that substance only. The supplier names the basis and its supporting document; the buyer checks that both reach the finished product and the claim. Structure/function wording is allowed when it is truthful, not misleading and carries the disclaimer. Disease statements are outside that route. FDA does not clear the supplement or its label before sale; the firm that markets it does. ## Contaminants, moisture and the counter-ion The figures below are catalog release limits, not a replacement for the destination's legal limits. Where both exist, the lower one governs; where the law is silent, the specification supplies the number. The lot COA should give a result and a method for every line, not simply “conforms”. Catalog release limits · creatine hydrochloride | Line | Catalog gate | Basis | Lead | ≤3 mg/kg | Measured per element on the lot COA | Arsenic | ≤2 mg/kg | No harmonised EU maximum; the catalog figure governs | Cadmium | ≤1 mg/kg | Measured per element on the lot COA | Mercury | ≤0.1 mg/kg | Measured per element on the lot COA | Loss on drying | ≤1.0% | Hygroscopic salt; release line and storage indicator | Microbial load | Aerobic plate count ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Counts plus absence statements Chloride is not a contaminant here: it is the counter-ion, expected at about 21.2% for the 1:1 salt, and belongs with identity. Sodium is not part of the salt, so a sodium limit written for a sodium salt does not apply. The label arithmetic applies: a declared creatine mass is not the hydrochloride mass. ## What the pack may say The ingredient name is not a claim. “Creatine hydrochloride” describes the material; “more soluble” describes a physical property. “Absorbs better” or “works at a lower dose” is a claim and needs its own evidence and review. Solubility in a beaker does not establish absorption in a person. In the EU and the UK, a claim must be authorised and used under its conditions, or it is unauthorised. For the US, structure/function wording requires substantiation and the DSHEA disclaimer; disease-related wording is not an option. No health claim is made on this page; the content is specification and documentation guidance. ## Documents for the hydrochloride file The folder should contain the records in the table. Each one should be in date and scoped to this product; a monohydrate certificate or a certificate for another grade cannot support the lot. Records that support a creatine hydrochloride lot | Record | Evidence it carries | Source | Lot COA | Hydrochloride identity, salt and creatine figures, chloride, moisture, mesh, metals and micro | QC laboratory | Technical data sheet | Catalog limits, solubility, uses and pack | Supplier | Safety data sheet | Hazard, handling and transport information | Supplier | Agreed specification | Release limits and methods signed by both sides | Supplier and buyer | Allergen declaration | Allergen status and the basis for it | Manufacturer | GMO and BSE/TSE declarations | Raw-material and process status | Manufacturer | Origin and process flow | Site, route and lot traceability | Manufacturer | Audit and certification pack | Scope of the food-safety system | Certifier A collection of logos is not a document pack. Every record should be current, cover the site and name this product. ## Six checks before the file is signed - Does the specification name creatine hydrochloride, CAS 17050-09-8 and C4H9N3O2·HCl, and does the COA report the salt assay, creatine content, chloride, LOD and mesh? - Are the contaminant results inside the destination's current limits, with methods stated? - Does the file identify the manufacturing site, country of origin and process route? - Are all certificates current and in scope, and does the label declare the hydrochloride with the creatine mass derived from the salt mass? - Is every claim permitted for the destination and used within its terms, or a structure/function statement carrying the disclaimer? - Does a retained sample exist, and is there a written procedure for a lot that fails? Catalog figures are on the creatine HCl product page. The monohydrate's own file appears on its product page and compliance page. For the analytical work, see the methods section; for release, the quality page; for framework references, the EU regulatory notes. ### 06 How we prove a creatine lot is the hydrochloride URL: https://nutrition.rainwoodbio.com/products/specialty/creatine-hcl/identity/ Reviewed: 2026-11-20 Four independent checks make a creatine hydrochloride lot: HPLC and IR show the creatine molecule, titration measures chloride, the creatine content should land between 74.0% and 78.0%, and loss on drying should stay at or below 1.0%. A salt assay by itself cannot distinguish the hydrochloride from the monohydrate or from free creatine. Chloride and the acidic solution are what make the form visible. In one lineA creatine HCl lot is proved by the chloride and the acidic solution as much as by the creatine peak: HPLC and IR name the molecule, titration names the counter-ion. ## The four identity layers Every test answers a separate question and leaves a separate blind spot. A certificate can name the right product and still say nothing about the powder in the drum; the layers below only work when read together. Four layers of creatine hydrochloride identity | Layer | Question | Test | What it proves | Document | Are the form, CAS and pack named? | Name, CAS 17050-09-8, formula, lot code | Traceability only | Molecular | Is the molecule creatine? | HPLC retention plus IR against a reference | The creatine skeleton, not the salt | Counter-ion | Is chloride the counter-ion? | Chloride titration and pH of a defined solution | The hydrochloride form | Mass balance | Is the powder diluted or partly another form? | Creatine content, LOD, chloride ratio | Whether the numbers agree Paperwork is the first layer, and it is the easiest to get wrong: a valid certificate can belong to a different drum or grade. The lot code should be identical on the certificate, the pouch, the drum and the retained sample. ## The creatine-to-chloride ratio The 1:1 salt has fixed arithmetic. Creatine hydrochloride is 167.59 g/mol; creatine contributes 131.13 g, or 78.2%, and chloride about 21.2%. That gives a creatine-to-chloride mass ratio near 3.70:1. A chloride result close to 21.2% alongside a creatine content near 78% is what a single salt should produce. The paired numbers catch more than either one alone. Low chloride with high creatine suggests free creatine or monohydrate, since both carry more creatine and no chloride. High chloride with a low assay suggests sodium chloride or another chloride source. A correct chloride figure with creatine outside the window suggests a measurement problem, a blend or a different salt. Loss on drying settles the hydrate question. This salt is not a hydrate and is released at ≤1.0%; the monohydrate contains about 12% water of crystallisation and is released at ≤12.0%. No chloride, a high LOD and a creatine content near 88% describe the monohydrate, not a damp hydrochloride. Read the three lines together. ## X-ray diffraction and the solid state X-ray diffraction tests the solid state: is the powder crystalline, and does the pattern match a reference? The hydrochloride, monohydrate and free creatine can differ in pattern, so a match can support the form when titration alone cannot separate a single salt from a physical mixture. It can also distinguish a crystal from an amorphous dilution. Diffraction is not a purity assay and says nothing about the counter-ion. Before accepting a match, ask for the reference pattern and the method's detection limit. On a disputed lot, XRD alongside chloride and HPLC is stronger than either test alone. This is not a routine release test for the salt, and “XRD conforms” without the pattern tells the reader almost nothing. ## What substitution looks like Creatine forms and diluents that can pass a creatine assay | Material | What changes | Signal | Test | Creatine monohydrate | No chloride; about 12% water; creatine near 88% | Low chloride; LOD above 1.0%; pH nearer neutral | Chloride, LOD, pH, IR | Free creatine | No chloride; creatine near 100% | Low chloride; higher pH; high creatine | Chloride, pH, IR, XRD | Creatine nitrate | Different counter-ion; nitrate load | Little or no chloride; nitrate peak; acidic pH | Ion chromatography, chloride, IR | Sodium chloride | Salt raises chloride and ash; active assay drops | Chloride high; sodium detected | Chloride, sodium by ICP-OES, assay | Diluent or water | Assay and creatine fall; LOD may rise | Low creatine; mass balance does not close | HPLC, LOD, IR Creatine nitrate and the monohydrate are legitimate when declared and labelled. The problem is a form that was not declared, not the existence of an alternative. Colour proves very little: the white-to-off-white window is broad, and a blend can reproduce it. Chloride, loss on drying and creatine content are the stronger signals. ## How to write the identity into the specification - “Creatine hydrochloride, CAS 17050-09-8, C4H9N3O2·HCl; one salt, no monohydrate or diluent.” - “Assay 99.0–101.0% as the salt by HPLC; creatine content 74.0–78.0%.” - “HPLC retention and IR against a reference; spectra available on request.” - “Chloride about 21.2% by titration, where the form needs analytical confirmation.” - “Loss on drying ≤1.0%; pH of a defined solution reported.” - “Heavy metals and microbiology as catalogued; ≥95% through 80 mesh.” - “No other creatine form or diluent above the agreed limit.” ## Five questions for the supplier - Which form is this lot, and what CAS number appears on the certificate? - May we see the HPLC chromatogram and the IR spectrum, not just the assay? - What chloride result did titration give, and what is the pH of a defined solution? - What are the creatine content and LOD, and how were both calculated? - If a result is challenged, would you share a re-test of the retained sample? Together those answers form an identity file; a single assay figure does not. Catalog figures are on the creatine HCl product page; the COA page shows where each figure sits; the grades page covers the physical choices; the level-four comparison sets the salt against the monohydrate. The monohydrate page shows the other form, the methods section explains the titration and HPLC, and the quality page describes release. ### 01 What the COA for egg white protein actually contains URL: https://nutrition.rainwoodbio.com/products/protein-collagen/egg-white-protein/coa/ Reviewed: 2026-11-20 An egg white protein certificate is a protein report with a moisture correction. It carries protein by Kjeldahl with the 6.25 nitrogen factor, the moisture that converts that figure to an as-is basis, fat, ash and the physical and microbiological tests of a spray-dried powder. The identity line should describe the protein profile, not only the words “egg white”; the limits in the first table are the catalogue specification, while the batch COA confirms one lot. In one lineThe protein figure is only half the certificate: it needs the 6.25 nitrogen factor, the dry basis and the moisture beside it, and the egg allergen statement belongs in the same file. ## Reading the certificate Read a certificate as a set of claims that have to be checked one at a time. Every parameter should show the measurement, the technique behind it and the boundary it had to meet. When a line gives only a verdict, the buyer has no way to test it. Protein and moisture are a pair. Neither stands alone: protein is reported on a dry basis, moisture says how much of the powder is not protein, and the as-is value used in a formula is the product of the two. The identity row is the other anchor, because “egg white protein” is a source and a process, not a single molecule. Identity, composition and contaminants · egg white protein | Parameter | Method | Release limit | Appearance | Visual | Off-white to light tan powder | Protein, dry basis | Kjeldahl, N × 6.25 | ≥80.0% | Moisture | Gravimetric, vacuum oven | ≤8.0% | Fat | Solvent extraction | ≤1.0% | Ash | Gravimetric, 550 °C | ≤5.0% | Identification | Protein profile against a reference | Conforms | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh The allergen statement is not a test line, but it travels with the certificate: the material is egg-derived by definition. ## Dry basis, moisture and the nitrogen factor Protein is calculated from nitrogen, and the calculation is only as good as the factor. Egg protein uses 6.25. The same nitrogen result with the milk factor, 6.38, reads about 2.1% higher; with the collagen factor, 5.55, about 11% lower. A certificate that gives a percentage without the factor leaves the reader to guess. The basis matters as much. At the 8.0% moisture limit, a lot at 80.0% protein on a dry basis contains 73.6% protein as weighed. A formula that needs 20 g of protein takes 27.2 g of that powder, not 25.0 g. The certificate should state “dry basis” in the protein row and report moisture as a measured figure, so the buyer can repeat the calculation for the lot in hand. Kjeldahl measures nitrogen, not protein. Non-protein nitrogen is counted as protein by the factor. That is why the identity profile, and on suspicion a nitrogen-source screen, belong in the same review. A high protein figure from an unknown source is a question, not a result. ## Limit, result and what separates them A specification number and a lot result are two different things, and a certificate should never let one stand in for the other. The limit defines the window; the measured value says where inside it the lot fell. Printing the window again in the result column tells the buyer nothing about the powder. What belongs in the result column | Test | Limit | What the result should show | Protein | ≥80.0% dry basis, N × 6.25 | A measured percentage and the nitrogen result behind it | Moisture | ≤8.0% | A measured percentage | Fat and ash | Fat ≤1.0%; ash ≤5.0% | A measured percentage for each | Heavy metals | Per element | One figure in mg/kg for each element | Microbiology | Counts and absence | The measured count plus the absence result The verdict should be reproducible from the figures beside it. Microbiology needs a colony count and an absence result; the metal panel needs a number for each element rather than one summed figure; protein needs the measured percentage together with its factor and basis. ## What varies from lot to lot Hen age, feed and the season shift the solids a little; the spray dryer shifts moisture, colour and particle size; the heat step shifts how the powder disperses. A floor of 80.0% is met by a lot at 82% and by one at 80.5%, so a buyer who wants a narrower band must state it. Colour is a weak but useful signal. Off-white to light tan covers a wide range, and a shift inside it is not an identity failure. A powder that browns in the bag is a different matter: egg white contains a small amount of glucose, which reacts with lysine during warm storage, darkening the powder and lowering the available lysine. Some processors remove the glucose with an enzyme step before drying; the certificate rarely says so, and the stability file is the place to ask. A trend can matter more than a single result near an edge: protein drifting low, moisture climbing, or a new colour. The certificate's lot code must be the code on the bag, the drum and the sample kept back. ## When an outside test earns its cost Outside testing earns its cost at a new source, at the first shipment into a regulated market, when the allergen statement is challenged, when the nitrogen looks too high, or when one lot breaks the pattern of the previous ones. The panel is narrower than a full certificate: protein with the nitrogen figure, an amino acid profile against an egg white reference, moisture, fat and ash, ICP-MS for the metals, and the microbiological count. If the protein looks too good for the amino acid profile, add a screen for non-protein nitrogen, including urea and melamine by LC-MS/MS. If the source is disputed, an ovalbumin-specific immunoassay or an electrophoretic protein pattern answers a different question from total protein. Ask what each screen can detect; “not detected” without a detection limit says more about the laboratory than about the powder. Keep the chain of custody intact. The referee should test the sample that was retained, and the report should carry the lot code. In a dispute, hand over that sample, the certificate and the specification, then ask for the test that tells the candidate materials apart rather than a second run of the same assay. ## Comparing two suppliers Compare six things: the protein result with its factor and basis; moisture; fat and ash; the amino acid or protein profile; the egg allergen statement; and the pack with its lot code. If two offers match on protein but not on factor, basis or form, they are offers for different materials. Traceability is the next layer: the manufacturer, the heat treatment, the drying step, and whether the powder is milled or instantized. The catalogue specification sits on the egg white protein product page. The grade choice is set out on the grades page, the identity tests on the identity page, the method limits in the analytical methods library, and the release workflow on the quality page. ### 02 Egg white protein grades: protein floor and powder form URL: https://nutrition.rainwoodbio.com/products/protein-collagen/egg-white-protein/grades/ Reviewed: 2026-11-20 Egg white protein is sold as a spray-dried powder against a protein floor, and the grade is that floor plus the physical form. The catalogue specification is ≥80.0% protein on a dry basis, ≤8.0% moisture and ≥95% through 80 mesh, with an instantized version on request. The switch that matters is not the name on the bag but the protein per gram and the way the powder disperses. In one lineThe grade is the protein floor and the powder form behind it; instantizing changes how the powder wets and flows, not the protein the label declares. ## Why one name covers several powders Egg white protein, dried egg white and egg albumin are three names for the same family. The material is made by separating egg white from the yolk, pasteurising it, removing part of the water and spray-drying the rest. What leaves the dryer is a powder whose protein, moisture, colour and particle size all depend on the raw eggs, the heat treatment and the finishing step. None of those names is a controlled grade. “Egg white protein” can describe a powder at 80% protein on a dry basis and one at 85%, a fine milled powder and a coarse agglomerate, a product with no carrier and one with a processing aid. “Egg white protein isolate” is a trade name rather than a regulated category, so the buyer has to read the protein basis and the ingredient list instead of trusting the noun. The grade therefore has three parts: the protein floor, the physical form and the heat history. The first is arithmetic, the second changes the filling line, and the third changes how the proteins behave in water. ## The two catalogue forms side by side Standard milled and instantized egg white protein · catalogue limits | Point | Standard 80 mesh | Instantized, on request | Protein, dry basis | ≥80.0% (N × 6.25) | ≥80.0% (N × 6.25) | Protein, as-is at 8.0% moisture | 73.6% | 73.6% | Moisture | ≤8.0% | ≤8.0% | Fat and ash | ≤1.0% and ≤5.0% | ≤1.0% and ≤5.0% | Particle size | ≥95% through 80 mesh | Agglomerated; profile agreed | Bulk density | Higher | Lower | In water | Dusts, wets slowly, can lump | Wets faster, less dust | Usual fit | Capsules, bars, blends | Stick packs, drink mixes The table describes two forms of one specification, not two products. A tighter protein floor is a separate agreement: the catalogue says ≥80.0%, and a buyer who needs 85.0% has to put that number into the specification rather than infer it from a grade name. Whatever the floor, the factor stays 6.25 and the basis stays dry. ## What changes in the drum and on the line The standard powder is milled to pass 80 mesh. It is fine, it carries static, and it tends to float on water before it wets. On a filling line that means dust, bridging in the hopper and a risk of lumps in the sachet if the powder is packed warm or in humid air. Instantizing builds larger, porous particles that sink and disperse more quickly, which shortens the mixing step and reduces dust. The trade is bulk density. An agglomerated powder fills a scoop with less mass, so a 25 mL scoop that held 15 g of the standard powder may hold 11 g of the instantized one. A label built on a scoop volume is wrong the moment the form changes; the fill weight should be set on a balance, and the scoop should be sized to the powder actually bought. Heat history is the third difference. Egg white is pasteurised before drying, and the dryer temperature and the residence time affect how much of the protein stays soluble. A powder dried harder can still pass the protein floor and lose some of its dispersion and foaming behaviour. If the application depends on foam or gel, that is a functional specification, and it belongs in the trial rather than in the protein number. ## Dose arithmetic and the label Dosing uses the as-is protein, not the dry-basis floor. At 8.0% moisture, 80.0% dry-basis protein is 73.6% of the powder as weighed. To deliver 20 g of protein the formula needs 20 ÷ 0.736 = 27.2 g of powder. A 25 g scoop delivers 18.4 g; a 30 g scoop delivers 22.1 g. Those are the numbers that belong on the panel and in the weigh-up. The grade changes the arithmetic only if the floor changes. A powder at 85.0% dry basis with 8.0% moisture carries 78.2% as-is, and 20 g of protein then needs 25.6 g rather than 27.2 g. The 1.6 g difference is the whole benefit of the tighter floor, and it has to be paid for in the specification and the certificate. Protein claims are calculated on the finished product, not on the powder. EU rules put “source of protein” at 12% of energy and “high protein” at 20%; US rules put “good source” at 10–19% of the Daily Value and “high” at 20% or more, with the Daily Value fixed at 50 g. A 200 kcal sachet with 20 g of protein clears the high-protein threshold whichever grade supplied it. ## What to write into the specification - “Egg white protein (dried egg white), spray-dried, standard milled 80 mesh or instantized.” - “Protein ≥80.0% on a dry basis by Kjeldahl, N × 6.25.” - “Moisture ≤8.0%; fat ≤1.0%; ash ≤5.0%.” - “Particle size: ≥95% through 80 mesh, or the agreed agglomerated profile.” - “Identification by protein profile against an egg white reference.” - “Allergen statement: contains egg.” - “Heat treatment and any processing aid named; no undeclared carrier.” The grade name alone does not settle any of these lines. A specification that says only “egg white protein 80%” has left the form, the factor and the allergen statement open, and those are the three points where two quotations usually differ. ## When this grade is the wrong choice Egg white protein is not a vegan material and it is not suitable for a consumer with an egg allergy, whatever the grade. It is milk-free, which is the reason many formulas use it, but “milk-free” is not “allergen-free”. A brief that asks for both a dairy-free and an allergen-free protein has no answer in this family. It is also a poor fit where the formula needs a clear, neutral-tasting drink at a high dose, because egg white brings its own flavour and foam. The comparison with whey is set out on the egg white versus whey page, and the whey protein concentrate page carries the other specification; the certificate tests are on the COA page; the catalogue specification is on the product page; the release process is described on the quality page. ### 02.1 Egg white protein vs whey protein: amino acids, allergens and the label URL: https://nutrition.rainwoodbio.com/products/protein-collagen/egg-white-protein/grades/egg-white-protein-vs-whey-protein/ Reviewed: 2026-11-20 Egg white protein and whey protein are both complete protein powders with a PDCAAS of 1.0. The differences that decide a formula are the amino acid pattern, the allergen and the declaration: whey carries more leucine, egg white more sulfur amino acids, and one declares egg while the other declares milk. The label follows the allergen and the dose, not the protein number alone. In one lineEgg white protein and whey protein are close on protein quality; they are not interchangeable on the allergen, the amino acid pattern or the declaration. ## The amino acid profiles side by side Both supply all nine essential amino acids and are complete proteins. The differences are in the proportions, not in the presence or absence of an amino acid. The table below uses typical published values per 100 g of protein; the lot's amino acid profile, not the table, is the release document. Approximate typical amino-acid values · g per 100 g protein | Amino acid | Egg white protein | Whey protein | Leucine | 8.6 | 10.5 | Isoleucine | 5.4 | 5.9 | Valine | 6.6 | 5.7 | Lysine | 7.0 | 9.4 | Methionine and cysteine | 6.0 | 4.3 | Arginine | 5.8 | 2.3 | Tryptophan | 1.5 | 1.8 The largest gaps are leucine, lysine and arginine, with a smaller but consistent lead for egg white in the sulfur amino acids. Those differences are large enough to matter when a formula is built around one amino acid target and small enough that the two proteins behave alike in most other respects. The arginine-to-lysine ratio is the most useful single discriminator: near 0.8 for egg white, near 0.25 for whey. ## Leucine, BCAAs and what the number means Leucine is the amino acid most often quoted in a protein comparison. Whey protein carries about 10.5 g per 100 g of protein and egg white about 8.6 g, so a 20 g protein dose supplies roughly 2.1 g of leucine from whey and 1.7 g from egg white. The total branched-chain amino acids are closer, because egg white is higher in valine. These are composition figures, not claims about what the protein does in the body. The practical consequence is arithmetic. A formula built to a leucine target reaches it with slightly less whey protein; a formula built to a sulfur amino acid target reaches it more easily with egg white. Most supplements are not built to either target, and the amino acid choice then comes down to the label, the allergen and the taste. Blending does not remove the arithmetic. A 50/50 blend of the two proteins lands between the rows of the table, and the label still has to declare both sources and both allergens. A blend can be useful when the formula wants a particular amino acid pattern and a particular mouthfeel, but it is a new specification rather than a way to avoid the decision. ## The allergen: egg against milk This is the difference that cannot be argued with. Egg white protein is egg-derived, and egg is on the EU Annex II list, a US major food allergen under FALCPA, and one of the 14 allergens declared in the UK. Whey protein is milk-derived, and milk sits on the same three lists. A product can avoid one of the two allergens by choosing the other protein, and it cannot avoid both with either material. Egg white protein is therefore milk-free but not egg-free. It suits a dairy-free brief for a consumer who tolerates egg, and it is not a substitute for whey in a product intended for someone with an egg allergy. Whey protein is egg-free but not milk-free, and a whey isolate with very little lactose still carries the milk declaration. Neither material is hypoallergenic. Shared lines need their own assessment. An egg white powder packed on a line that also handles milk may need a cross-contact statement, and the decision belongs to the risk assessment, not to the certificate. The statement should never contradict the ingredient list: a product that contains egg cannot say “may contain egg” as its only egg reference. ## What the label has to say The ingredient name and the allergen declaration are the two lines that change when the protein changes. The table below compares the usual wording in the EU and the US; the exact form is set by the destination and the brand's reviewer. Label and declaration · egg white protein against whey protein concentrate | Point | Egg white protein | Whey protein concentrate | Ingredient name | Egg white protein (egg) | Whey protein concentrate (milk) | EU allergen emphasis | Egg | Milk | US “Contains” statement | Egg | Milk | Protein factor | N × 6.25 | N × 6.38 | “Free-from” position | Not egg-free; milk-free claim needs a definition | Not milk-free; lactose-free is not milk-free The protein factors differ by about 2.1% on the same nitrogen result, so a panel built with the wrong factor is slightly out even when the certificate is right. The panel figure is the as-is protein at the declared serving weight, not the dry-basis floor. And the “free-from” column is a warning: “dairy-free” has no harmonised definition in either market, and no wording makes an egg-derived powder egg-free. ## The dose and the powder weight At 8.0% moisture, egg white protein at 80.0% dry basis carries 73.6% protein as weighed, so 20 g of protein needs 27.2 g of powder. A whey protein concentrate 80 at 5.0% moisture carries 76.0% as-is and needs 26.3 g. The egg white serving is about a gram heavier, and that gram is the price of the different protein, not a defect. Over a 25 g scoop the gap is smaller than the rounding on most labels: 18.4 g of protein from the egg white powder against 19.0 g from the concentrate. The decision rests on the allergen, the amino acid target and the sensory result; the dose arithmetic only confirms that both proteins can reach the label claim. Protein claims work the same way for both. A 200 kcal serving with 20 g of protein draws 40% of its energy from protein, which clears the EU “high protein” threshold of 20% and the US “high” threshold of 20% of the Daily Value. The source of the protein does not change the claim arithmetic, and it does not create a health claim. ## When to choose each Choose egg white protein when the brief is milk-free, when the formula can carry the egg declaration, and when the sulfur amino acid or arginine pattern is the reason for the choice. It also avoids the dairy association, if the egg declaration is acceptable. The egg white protein product page carries the catalogue specification. Choose whey protein when the brief is egg-free, when the formula is built to a leucine target, or when a clear drink and a low lactose load matter more than the milk declaration. The whey protein concentrate page sets out the WPC 80 specification. A blend declares both allergens and needs both statements. The decision order is allergen first, amino acid target second and label third; the protein percentage is the last question, not the first. The egg white grades page covers the powder forms, the analytical methods library covers the tests behind the profile, and the quality page describes the release workflow. ### 03 Egg white protein stability: moisture, heat and the pack URL: https://nutrition.rainwoodbio.com/products/protein-collagen/egg-white-protein/stability/ Reviewed: 2026-11-20 Spray-dried egg white protein keeps well when it stays dry and cool. Moisture uptake causes caking and browning, heat denatures the protein and lowers its solubility, and a warm, humid store shortens the usable period. The pack and the storage condition set the retest period; the certificate does not. In one lineDry and cool are the two conditions the powder needs; moisture and heat are what turn a soluble egg white protein into a caked, browned powder. ## The powder: moisture is the first limit The catalogue sets moisture at ≤8.0%. That is a release limit, not a storage allowance. Egg white protein is hygroscopic, and an opened pouch equilibrates with the room: the moisture figure climbs, the powder picks up water at the particle surface, and the particles stick together. Once the lumps form, they do not break up on shaking, and the powder no longer disperses cleanly. Water also drives chemistry. Egg white contains a small amount of glucose, and glucose reacts with the lysine in the protein during warm or moist storage. The result is a darker powder, a changed flavour and less available lysine. The reaction is slow in a sealed pack at ambient temperature and much faster in a warm, humid filling room or a pouch left open on a bench. A desiccant is useful in a humid climate but cannot replace a proper closure. The foil pouch is the barrier; a clear jar is not, however convenient it looks. If the pack is cold when it arrives, let it reach room temperature before opening, so that no condensation forms on the powder. ## The solution: heat, pH and microbial load Egg white protein disperses in water to a clear to slightly opalescent liquid. That liquid is also a good medium for microorganisms, and it is sensitive to heat: egg white proteins begin to denature around 60 °C and are substantially changed by 80 °C, so a process hot enough to pasteurise a drink is hot enough to change its protein. A ready-to-drink product therefore needs a validated heat process, a pH hurdle or another preservation step, and the validation has to be done in the drink. pH matters as well. Near the isoelectric point of the egg white proteins, around pH 4.5–5.5, solubility is at its lowest and a drink can turn hazy or sediment. A neutral or mildly acidic shake is easier to hold than an acidic one, and the formulator should check the appearance at the intended pH before fixing the process. Foam is a physical behaviour rather than a stability failure. Egg white foams when shaken or pumped, and a filling line that needs a still surface will see it. A powder stick avoids the problem until the consumer adds water; a ready-to-drink line has to manage it with the process and the equipment. ## What moves the powder What moves the powder in storage | Variable | Effect | Control | Moisture | Caking, browning, loss of dispersibility | Sealed foil pouch; dry store; desiccant where needed | Heat | Denatures protein; lowers solubility; accelerates browning | Cool store; controlled process temperature | Oxygen | Oxidises the small fat fraction; off-flavour | Low headspace; sealed pack | Light | Colour fade or shift at the surface | Opaque or foil pack; dark store | pH, in solution | Haze and sediment near the isoelectric point | Validate the matrix pH; buffer if needed | Microorganisms | Growth in a reconstituted liquid | Validated heat process or another hurdle These factors act together. A warm, humid store combines moisture and heat, and a clear bottle of reconstituted drink on a sunny bench combines light, heat and microbial growth. The useful question is not whether egg white protein is stable, but under which pack, at which condition and for how long. ## Designing the stability trial Write the protocol around four decisions: which pack, which storage condition, which time points and which tests. For the warehouse, run a long-term arm at 25 °C/60% relative humidity and an intermediate arm at 30 °C/65%; for the pack, add an accelerated arm at 40 °C/75%. A light-exposure arm covers the surface colour change that a dark incubator misses. Test protein by Kjeldahl with the 6.25 factor, moisture, appearance, dispersibility and the microbiological count at each point. For an instantized grade add bulk density and wetting time, because the agglomerate can lose its advantage before the protein figure moves. For a stick pack, test the seal as well as the powder: a pinhole is enough to let moisture in. Request the stability summary that was generated for the pack in your purchase order. A 25 kg fiber drum and a 1 kg foil pouch differ in headspace, surface-to-volume ratio and how often they are opened, and the data belongs to the pack rather than to the product family. ## How the finished format changes it A protein bar is the hardest common format. The bar has a water activity that allows moisture to move between phases, and the sugars and the protein are in contact for months. Egg white protein can contribute to hardening as the proteins rearrange and the water redistributes, and the bar has to be tested as a bar, not as a powder. A capsule or tablet starts dry, but the fill is hygroscopic and the shell or the excipients can move moisture into it. Compression adds heat and pressure, and a tablet that was stable as a powder can pick up moisture from the air after packing. A stick pack fails at the seal; a ready-to-drink fails at the heat step or at the pH. None of these formats simply takes the bulk pouch's shelf life with it. ## Where the retest period comes from There is no single shelf-life figure for egg white protein: it depends on the pack and on how the pack is stored. The retest period on the specification is the number that counts, and it should point to the stability file for that pack. A figure that names neither the pack nor the storage condition nor the test panel is not a shelf life. At the end of the retest period, assay the retained sample again before extending use. Never extend on assumption, and never apply a drum figure to a pouch that was repacked from it. The product page sets out the standard packs; the COA page describes the release tests; the MOQ page gives the pack sizes and lead time; the microbiology method note describes the counts; the quality page describes the release workflow. ### 04 Egg white protein: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/protein-collagen/egg-white-protein/moq/ Reviewed: 2026-11-20 The MOQ for egg white protein is 1 kg in a foil pouch, and the bulk pack is a 25 kg fiber drum. Standard packs ship in 1–7 days. A firm quotation needs the protein basis and factor, the powder form, the pack, the Incoterm and destination, the paperwork and the market of sale. In one lineOne kilogram is the floor because the foil pouch is the smallest unit with its own lot code, sample and test record. ## Why the floor is one kilogram One kilogram is enough for a bench trial, a retained sample and an independent check of the protein and the allergen statement. It is also light enough for a parcel carrier, which helps when a formulator needs powder before the production plan is settled. The pouch is lot-coded, so a trial result can be traced to one manufacturing lot. Anything under a kilogram is normally carved out of a bigger lot and packed down. The extra handling breaks the link to the original pack and makes the lot harder to trace, while the powder itself is unchanged. The 25 kg drum cuts handling per kilogram but ties up stock for longer, and every time a drum is opened in a damp room the powder takes on moisture. ## Pack options Standard egg white protein packs | Format | Net weight | Where it fits | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; close tightly after use | Fiber drum | 25 kg | Routine production | Inner bag; lot code on drum and bag | Instantized powder | 1 kg or 25 kg | Stick packs and drink mixes | Bulk density and wetting change | Split pack | On request | Small bench work | Repack record; lot code retained The catalogue powder is milled to pass 80 mesh. Instantizing is a different physical form rather than a packing choice: it changes bulk density, dust and wetting time, so it should be named before the quotation. Any split below the standard pack is a repack with its own record, not the catalogue pouch. ## Dispatch and transit Orders for the standard pack are quoted at 1–7 days from confirmation. That covers picking, paperwork and hand-over to the carrier, not the transit, the customs step or the customer's own release. Instantizing or a non-standard pack changes the schedule, and the quotation should give that separately. Ask for a dispatch date, not only the range. The pouch normally goes by parcel carrier; the drum goes on a pallet. The Incoterm fixes who arranges the freight and who handles entry. The certificate and the other lot papers should travel with the pack, not follow it. ## Six points for a usable quotation An offer becomes comparable when it answers six points: - What the material is. Egg white protein, spray-dried, standard milled or instantized. - The release specification. Protein floor on a dry basis with the 6.25 factor, moisture, fat, ash, particle size and microbiology. - How much, in what. 1 kg pouch, 25 kg drum, or an instantized or split variant. - Where it is going, and on what terms. Which country, which port or address, and which Incoterm. - The paperwork. COA, specification, SDS, allergen statement and any market-specific declaration. - The use and the market. Whether the use is a supplement, a food or something else, and the market of sale. An offer that omits the market or the form cannot be compared with another. The same powder may fit one destination and fall outside the file for the next, and the egg statement belongs in the offer because the material is egg-derived. Commercial terms are given on the quotation, not here. ## Why the sample has to be a lot Use the 1 kg pouch as the qualification unit. Test protein by Kjeldahl with the factor stated, moisture, fat, ash, the microbiological count and the allergen statement before scaling. Keep a retained sample from the same pouch, and check that the lot code on the pouch, the certificate and the quotation agree. A sample with no traceable lot is a demonstration, not a qualification batch. A trial smaller than a kilogram comes from a repack, not from the catalogue pouch. It is drawn from a bulk lot, carries its own handling record and is not the same thing as the 1 kg foil pack. Get the split confirmed in writing and file its lot code with the trial data; the bench sample and the production drum need not come from the same lot, even when both meet the same specification. ## Terms worth fixing before the first order Commercial and quality terms belong in one place: Incoterm, pack, dispatch date, specification revision, a certificate for every lot, the sample kept back, the retest period and the change route. Put them in a quality agreement before the first production order; reopening them after a dispute is harder. When a lot falls outside the agreed specification, the evidence is the retained sample and a joint test against the named method — not a photograph of the drum. The agreement should say who pays the referee laboratory and which one both parties will accept. A rejection based on appearance alone is difficult to defend from either side. The product page carries the catalogue specification; the COA page sets out the release tests; the compliance page covers the allergen and market file; the MOQ glossary entry explains the term; the logistics page sets out shipping and documentation. ### 05 The regulatory file for egg white protein URL: https://nutrition.rainwoodbio.com/products/protein-collagen/egg-white-protein/compliance/ Reviewed: 2026-11-20 Egg white protein has a long history of food use in the EU, the US and the UK, and it is not a novel food. No pre-market approval is needed. The practical questions are different: does the pack declare egg, does the label protein match the powder, and do the metals stay inside the limit for the product as sold? In one lineThe egg declaration is the centre of the file: the material is an ordinary food ingredient, but every pack that contains it must say egg, in every market reviewed here. ## The three checks The first question is status: may the material be sold as food where it is going? Here the answer is yes in all three markets. The second is the label: the ingredient name, the egg declaration and the protein the panel promises. The third is contamination: do the lot results leave the product inside the limit at the dose taken? Different people own each answer. Status belongs to the supplier and the importer, the allergen to the recipe and the label, the metal limit to the category and the dose, and any claim to the brand. A COA supports the material; it settles none of these. ## European Union Dried egg white is a traditional food in the EU and does not appear on the novel-food list, as far as this review can establish; a new source or process still deserves a check against the current catalogue before launch. Food supplements are governed, as of this review, by Directive 2002/46/EC, which sets the permitted ingredient categories and the labelling rules. Labelling is governed by Regulation (EU) No 1169/2011. Egg appears on the Annex II list, so the word must be emphasised in the ingredient list — “egg white protein (egg)” is the usual pattern — and the duty follows the ingredient into capsules, sticks and bars. Metals fall under Regulation (EU) 2023/915, whose limits apply to the supplement as sold rather than to the drum. ## United States In the US, the material is used as a food ingredient and as a dietary ingredient. A supplement version brings the facility and records under 21 CFR 111, and the finished label carries a Supplement Facts panel. Under FALCPA, egg is a major food allergen. The label must say so — “Contains: egg” or a parenthetical after the ingredient — and the duty applies to egg white protein exactly as it does to a whole egg. The panel protein also needs a nitrogen factor: US rules default to 6.25 where no specific factor applies, which is the factor used here, so certificate and panel agree. ## United Kingdom The UK runs on retained food law. Egg is still one of the 14 allergens that must be declared, under the Food Information Regulations 2014, and supplements fall under the Food Supplements (England) Regulations 2003 and the parallel rules in Scotland, Wales and Northern Ireland. Great Britain and Northern Ireland do not share one route: GB has its own register and labels, while NI follows the EU framework, so the delivery address decides and the buyer records which applies. ## Metals and the finished-product limit Metals are judged on the product as consumed, not on the drum alone. The figures below are a starting point for a supplement file; the current text for the destination and the daily dose set the limit that has to be met. Heavy-metal limits · egg white protein used as a supplement, by market | Element | EU | US | UK | Lead | 3.0 mg/kg (as sold) | No federal limit for supplements; state law applies | Retained limit; check the current text | Cadmium | 1.0 mg/kg (as sold) | No federal limit for supplements | Retained limit; check the current text | Mercury | 0.10 mg/kg (as sold) | No federal limit for supplements | Retained limit; check the current text | Arsenic | Not harmonised; member-state rules may apply | No federal limit for supplements | Retained limit; check the current text The catalogue specification sets Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg, mirroring the EU ceilings. Those are limits, not targets: a raw material at the ceiling leaves no headroom for the rest of the formula, and a buyer dosing 30 g a day should contract a lower internal limit. Arsenic at ≤2 mg/kg is a specification term. ## The egg declaration on the label The allergen statement is not optional. Egg white protein is egg-derived, so a product that contains it cannot be described as egg-free; a “may contain egg” statement on a product that does contain egg is also wrong. The declaration should name egg in the ingredient list and, in the US, in the “Contains” statement; cross-contact wording for a shared line is a separate, assessed decision. “Dairy-free” is a different question. Egg white protein is milk-free, which is why many formulas use it, but neither the EU nor the US has a harmonised definition, so the claim needs a threshold and a method. It does not remove the egg declaration. ## Claims No disease claim is open to a food or a supplement in these markets, and this site makes none. Protein wording is a nutrient content claim with conditions: the EU sets “source of protein” at 12% of energy and “high protein” at 20%, while the US sets “good source” at 10–19% of the Daily Value and “high” at 20% or more, against a Daily Value of 50 g. Any statement about an effect in the body is a health claim and sits outside this file. EU health claims for protein are authorised at nutrient level and carry conditions; US structure/function wording needs substantiation and the DSHEA disclaimer. In both cases the brand owns the wording. ## Documents for the file - Batch COA with protein on a dry basis, the 6.25 factor, moisture, fat, ash, particle size and the contaminant and microbiological results. - Specification and technical data sheet naming the form, the heat treatment and the protein basis. - Safety data sheet in the 16-section format. - Allergen statement declaring egg, plus a statement covering any processing aid or carrier. - Statement of the basis for sale as a food or dietary ingredient in the destination. - Non-GMO statement, origin record, and halal or kosher certificates where the market requires them. The product page carries the catalogue specification. The identity page covers the egg-specific evidence, the EU and US regulatory notes collect the framework references, and the quality page describes how the release file is assembled. ## Checks before the order - Does the specification name the material and the protein factor, and is the basis dry? - Does egg appear on every pack and in every finished product, capsules and stick packs included? - Do the contaminant results leave headroom under the limit at the intended dose? - Is every claim a permitted nutrient content claim, and is any “dairy-free” wording defined? - Do the certificate, specification, SDS and allergen statement match the quotation's version? - Is the destination route recorded, with the UK decision separated from the EU one? ### 06 How we prove an egg white protein lot is egg white URL: https://nutrition.rainwoodbio.com/products/protein-collagen/egg-white-protein/identity/ Reviewed: 2026-11-20 An egg white protein lot is identified by four agreeing measurements: the source and ingredient name, protein by Kjeldahl with N × 6.25, an amino acid profile that matches egg white, and a mass balance of moisture, fat and ash. The egg allergen statement is part of the identity file, because the material is egg-derived by definition. In one lineA lot is egg white protein when the nitrogen, the amino acid pattern and the mass balance all agree, and none of them leaves room for a carrier. ## Four layers of evidence A certificate can carry the right name and still leave the material unproved. Each layer below settles a separate question, and a supplier who stops at the first has described a document rather than a powder. Four layers of egg white protein identity | Level | What it asks | Technique | What it establishes | Document | Is the source and form named? | Name, source, specification | Paperwork only | Protein | How much nitrogen is present? | Kjeldahl, N × 6.25 | Total nitrogen, not which protein | Profile | Is the protein egg white? | Amino acid profile or electrophoresis | The protein pattern | Mass balance | Is the powder diluted? | Moisture, fat, ash, carbohydrate | Consistency of the numbers The order matters. The document check is cheap and necessary; the protein check is the headline; the profile is the layer that separates egg white from whey, soy or collagen; and the mass balance catches a powder that is mostly protein plus a carrier. A lot can pass the first two and fail the last two. ## The nitrogen factor and the amino acid ratios Egg white protein is calculated as nitrogen × 6.25. That factor is the arithmetic that turns the Kjeldahl result into a protein figure, and it is fixed by the specification rather than by the certificate layout. At 80.0% protein on a dry basis with 8.0% moisture, the powder is 73.6% protein as weighed; the other 26.4% is water, fat, ash and carbohydrate, not a second protein. The amino acid profile is the fingerprint. Egg white protein has an arginine-to-lysine ratio near 0.8, while whey sits near 0.25 and soy is higher still; its sulfur amino acids, methionine and cysteine together, run at about 6 g per 100 g of protein against about 4 g for whey. Hydroxyproline should be absent, because its presence points to collagen or gelatin. These are typical published ratios, not release limits, and the lot profile is what the specification should require. The ratio is a fingerprint, not a purity assay. A blend can be built to land near the egg white pattern on the main amino acids, and the mass balance is what catches the rest. Read the profile with the protein, moisture and ash together, and ask for the full table rather than a summary of “protein profile conform”. ## X-ray diffraction and the solid state Spray-dried egg white protein is amorphous. Its X-ray diffraction pattern is a broad halo with no sharp crystalline peaks, and that is the expected result for the pure powder. Sharp peaks mean a crystalline component: lactose, maltodextrin, a salt or another carrier added as a diluent. For a product sold as pure egg white protein, that is a finding worth explaining. XRD is not a protein assay and cannot tell egg white from whey. It answers the solid-state question, and its value is in catching a crystalline diluent that the protein figure alone would not reveal. Pair it with Fourier-transform infrared spectroscopy, where the amide I band around 1650 cm⁻¹ and the amide II band around 1545 cm⁻¹ confirm the protein backbone and the carbohydrate region shows a sugar carrier. Before accepting a “conforms” note, ask to see the reference pattern and the detection limit. A diffractogram with nothing to compare it against is a picture, not an analysis. The XRD method page and the FTIR method page set out what each technique can and cannot settle. ## How substitutions show up Common egg white protein substitutions and the signals | Substitute | Effect on the powder | Warning sign | Test | Whey or milk protein | Cheaper protein with a similar figure | Amino acid pattern shifts; arginine low | Profile, milk ELISA | Soy protein | Cheaper protein; changes the profile | Arginine high; soy markers | Profile, soy ELISA | Collagen or gelatin | Raises the nitrogen figure cheaply | Hydroxyproline present | Hydroxyproline by HPLC | Maltodextrin | Dilutes the powder | Protein low; crystalline peaks | Mass balance, XRD | Urea or melamine | Inflates Kjeldahl nitrogen | Protein high against the profile | LC-MS/MS nitrogen screen The non-protein nitrogen route is the one that catches buyers most often, because it defeats the protein test without adding any protein. The amino acid profile is the first check: if the nitrogen says 85% and the summed amino acids say 70%, the gap is the question. The second check is a direct screen for urea and melamine. Colour and taste are weak signals. Off-white to light tan covers a wide range, and a fine powder looks like another fine powder. The stronger evidence is the profile, the mass balance and the nitrogen screen. ## What the specification should say about identity - “Egg white protein (dried egg white), source: hen egg white.” - “Protein ≥80.0% on a dry basis by Kjeldahl, N × 6.25.” - “Moisture ≤8.0%; fat ≤1.0%; ash ≤5.0%.” - “Identification by amino acid profile against an egg white reference.” - “Allergen statement: contains egg.” - “No added protein, carrier or non-protein nitrogen source.” - “Particle size ≥95% through 80 mesh.” The allergen line is not decoration. A specification that names egg white protein but leaves the allergen statement to the invoice has left the most consequential label fact to a document that is not controlled with the specification. ## Five questions worth asking - Which egg source and which drying process produced this lot? - What is the nitrogen result, and which factor was applied? - Can you provide the full amino acid profile, not only the protein percentage? - Is any carrier, added protein or nitrogen source present, and how is it declared? - In a dispute, would you test the retained sample jointly with us? Those answers, taken together, are an identity file; a protein percentage on its own is not. The product page carries the catalogue specification, the COA page explains how each result is reported, the grades page compares the powder forms, and the quality page describes the release file. ### 01 What the COA for hemp protein actually contains URL: https://nutrition.rainwoodbio.com/products/protein-collagen/hemp-protein/coa/ Reviewed: 2026-11-20 A hemp protein certificate has to be read from the protein line outward. The figure means nothing without its nitrogen factor and dry basis, and the moisture, fat, fibre and ash lines explain the rest of the powder. The contaminant and microbiology results then decide release for the intended market. In one lineA hemp protein certificate is only complete when the protein figure carries N × 5.7 and a dry basis, with moisture, fat and fibre beside it to explain the rest of the powder. ## Reading the certificate as a test report Hemp protein is a concentrate made from defatted hemp seed, so the certificate describes a mixture, not a single molecule. Fat, fibre, ash and moisture make the protein figure usable, and each row should carry the method and the limit beside the result. A certificate that reports only “protein 50%” has not said whether the powder is a lean concentrate or a partly defatted meal with a similar nitrogen count. The identity row matters too, because a protein profile can be satisfied by a different seed protein. Identity and proximate limits · hemp protein, 50% grade | Test | Method | Limit | Appearance | Visual | Off-white to light tan powder | Identification | Protein profile against reference (SDS-PAGE and amino acid profile) | Conforms | Protein | Kjeldahl, N × 5.7, dry basis | ≥50.0% | Fat | Solvent extraction | ≤10.0% | Fibre | Total dietary fibre, enzymatic-gravimetric | ≤10.0% | Ash | Gravimetric, muffle furnace | ≤6.0% | Moisture | Oven drying | ≤7.0% | Particle size | Sieve analysis | ≥95% through 80 mesh The catalogue limits above are the specification. The batch certificate repeats them beside the measured result for the lot; a result column that repeats the limit has not reported a measurement. Contaminant, microbiology and hemp-specific checks | Parameter | Method | Release limit or statement | Heavy metals | ICP-MS | Pb max 3 · As max 2 · Cd max 1 · Hg max 0.1 mg/kg | Microbiology | Plate count and absence tests | APC max 1,000 cfu/g; yeast and mould max 100 cfu/g; E. coli and Salmonella absent | THC and THCA | LC-MS/MS | Destination limit; 3.0 mg/kg as Δ9-THC equivalents in the EU for seed-derived products THC is not a catalogue line for this grade, but it is a lot statement for any hemp-derived food ingredient. In the EU the limit for processed seed products is 3.0 mg/kg as Δ9-THC equivalents, as of this review; a certificate that omits the THC result leaves the destination question open. ## Dry basis, moisture and the protein factor The protein result is reported on a dry basis. Nitrogen is measured on the powder as received, converted with the 5.7 factor, and then corrected for dry matter. At the catalogue moisture limit of 7.0%, a 50.0% dry-basis result is 46.5% as-is. A lot at 52.0% dry basis and 5.0% moisture would be 49.4% as-is. The dry-basis and as-is figures describe the same powder at different points, and only the as-is figure matches the weigh-up. The factor is a convention, not a measure of protein quality. Hemp is specified here at N × 5.7; the general food factor is N × 6.25, and the same nitrogen reports about 9.6% more protein under it. A 50.0% hemp result becomes 54.8% under N × 6.25 without a gram of powder changing. A certificate that does not name the factor cannot be compared with another one. ## Release limit and batch result The limit defines pass or fail; the result is the value the laboratory measured. Each needs its own column, and the method has to sit next to it. The table below sets out what the result column should contain, not a set of batch figures. What the result column should show | Test | Limit | Result | Protein | ≥50.0% dry basis, N × 5.7 | A measured percentage, with the factor and basis | Fat | ≤10.0% | A measured percentage and the extraction method | Fibre | ≤10.0% | A measured percentage and the fibre method | Ash | ≤6.0% | A measured percentage | Moisture | ≤7.0% | A measured percentage and the drying method | Heavy metals | Per element | A separate mg/kg figure for each metal | Microbiology | Counts and absence | The lot count and its absence statement | Particle size | ≥95% through 80 mesh | The measured percentage through the sieve Two method choices change the number more than the lot does. Fat by Soxhlet leaves bound lipid behind, while acid hydrolysis recovers more; crude fibre is not total dietary fibre, and the enzymatic-gravimetric method reads higher. State the method, or the limits are not comparable. ## What changes from lot to lot Hemp is a small-acreage crop, and the powder moves with the seed and the press. Variety, season and soil change the protein and the mineral load; dehulling changes the fibre, pressing changes the fat, and the mill changes the particle size. A lot at 50.5% protein with 9.5% fat and 9.5% fibre would be inside the limits but would be a different powder from one at 55% protein, 5% fat and 4% fibre. The limits do not describe the lot; the results do. Appearance is the least quantitative line. Hemp protein carries chlorophyll, so the powder ranges from off-white to light tan with a green cast; pressing and storage move it. A darker batch is not automatically out of specification, but a colour shift with a rising peroxide value points to oxidation. Watch the direction across lots rather than a single result at the edge: protein drifting down, fat drifting up, or fibre climbing as more hull travels with the meal. Certificate, pack and retained sample should all carry the same lot code. ## When an outside test is worth ordering An outside test is worth ordering for a new source, a first regulated-market shipment, an organic or non-GMO claim, a disputed protein figure, or an open THC or cadmium question. The panel is Kjeldahl protein with the factor and dry basis, an amino acid profile, fat, total dietary fibre, moisture, ash, ICP-MS metals, microbiology, and THC and THCA by LC-MS/MS. Add a Cannabis sativa specific PCR or SDS-PAGE when the source is disputed, and a pesticide screen when the destination requires one. Each screen should come with its detection limit; a “not detected” result without one describes the method, not the powder. Keep the chain of custody tight: test the retained sample, and put the lot number on the report. A dispute goes to a referee with the retained sample, the certificate and the specification, and a request for tests that tell hemp protein from another seed protein. ## Comparing two suppliers Put seven lines side by side: the plant part and variety, the grade, the protein factor and basis, the fat and fibre results, the THC and cadmium results, the contaminant panel, and the pack and lot code. Agreement on “50% protein” means little if the factor, the fat or the fibre still differ; those offers describe different powders. The second layer is traceability: who manufactured the lot, whether the seed was hulled, how the oil was removed, and which mill finished the powder. The catalogue specification sits on the hemp protein product page; the grade comparison covers the options; the identity page covers the tests; methods covers the methods; the quality page covers release. ### 02 Hemp protein 50%, 65% or isolate: choosing a grade URL: https://nutrition.rainwoodbio.com/products/protein-collagen/hemp-protein/grades/ Reviewed: 2026-11-20 Hemp protein is sold as a family of powders, not one grade. The catalogue material is a 50% protein concentrate with fat and fibre caps; a higher-protein concentrate, an isolate and a granulated version are different specifications. The grade has to be chosen from the dosage form and the label, not from the protein number alone. In one lineThe grade is the protein floor plus the fat and fibre left beside it; the number on the front of the pack does not say which powder is inside. ## Why hemp protein comes in grades Hemp seed is about a quarter to a third protein, with oil and fibre making up most of the rest. The protein is separated by removing the oil and part of the hull, then milling the cake. How far that separation goes decides the grade: a seed powder, a concentrate, a higher-protein concentrate or an isolate. The grade is a process endpoint, not a variety. The same seed can become a 50% concentrate or an 85% isolate depending on the extraction and drying route, and the two powders behave differently in a formula even when both are called hemp protein. ## The grades side by side Hemp protein grades and what each one carries | Grade | Protein, dry basis | Fat | Fibre | Process | Typical use | Full-fat seed powder | About 25–30% | 25–35% | 20–30% | Milling whole seed | Flavour and texture; not a protein concentrate | 50% concentrate (catalogue) | ≥50.0% | ≤10.0% | ≤10.0% | Pressing, dehulling, milling | Powder sticks, bars, blends | 60–65% concentrate | ≥60.0% | ≤8.0% | ≤6.0% | Further defatting and classification | Higher-protein bars, compact servings | 85–90% isolate | ≥85.0% | ≤2.0% | ≤2.0% | Alkaline extraction, precipitation, drying | High-protein powders and beverages The first three rows are concentrates or seed powders; only the fourth is an isolate. The catalogue grade is the second row: a 50% concentrate with the fat and fibre caps in the product record. A 60–65% concentrate is a different purchase, and an isolate is a different process with a different ash and fibre profile. Values outside the catalogue row are typical published ranges, not limits we release against. ## Particle size, colour and flow The catalogue powder is ≥95% through 80 mesh. That fineness disperses well in a shaker but carries dust and wets slowly; granulation gives a coarser particle that flows and disperses faster at the same protein and fat limits. Milling and sieving set the particle size, so it can move with a new mill or screen while the chemistry stays the same. Hemp protein is opaque and slightly grainy in water; it disperses rather than dissolves. Colour runs from off-white to light tan with a green cast from chlorophyll, and the flavour is earthy and green. Fat makes the powder more prone to oxidation and gives a heavier mouthfeel; fibre binds water and can thicken a bar or a drink. A granulated grade changes the flow, not the nutrition panel. ## Dose arithmetic and the serving Start from as-is protein, not the dry-basis figure. At 50.0% dry basis and 7.0% moisture, the powder is 46.5% protein as-is. A 20 g protein serving needs 43.0 g of powder; a 30 g scoop delivers 14.0 g. At 55.0% dry basis and 5.0% moisture the as-is figure is 52.3%, so 20 g of protein needs 38.3 g. At 88.0% dry basis and 5.0% moisture an isolate is 83.6% as-is, and 20 g needs 23.9 g. The serving has to carry the rest: fat, fibre, ash and carbohydrate. A 30 g stick cannot hold 43 g of a 50% powder, so a 20 g protein claim from this grade needs a larger serving or a higher grade. The same arithmetic explains why a bar built on 50% hemp protein carries more fibre and fat per gram of protein than one built on an isolate. Neither is wrong; the label and the matrix have to agree. ## Specification lines for a hemp grade - Source: Cannabis sativa L. seed, hulled and defatted; name the variety or supply region where known. - Grade: 50% concentrate, 80 mesh powder or granulated. - Protein: ≥50.0% on a dry basis by Kjeldahl, N × 5.7. - Fat ≤10.0%; total dietary fibre ≤10.0% with the method named; ash ≤6.0%; moisture ≤7.0%. - Identification: protein profile conform by SDS-PAGE and amino acid profile. - Heavy metals, microbiology and particle size as on the product record. - THC and THCA statement against the destination limit; allergen, GMO and origin statements. ## When the 50% grade is the wrong choice The 50% grade is the wrong choice when a single serving has to deliver 20 g or more of protein in a small pack, when the formula cannot carry 10% fat or 10% fibre, or when the powder has to be light in colour and mild in flavour. A higher-protein concentrate or an isolate reduces the non-protein load, but it is a different specification and a different process. It is also the wrong choice when the protein claim is calculated on a tight energy budget: the fat and fibre in the concentrate add energy and mass that the claim has to absorb. The grade decision belongs before the nutrition panel is fixed, not after. The numbers are published on the hemp protein product page. The certificate lines are on the COA page; the market and label rules are on the compliance page; the comparison with pea protein is on the level-four page; the method notes are at methods. ### 02.1 Hemp protein vs pea protein: amino acids, fibre and the label URL: https://nutrition.rainwoodbio.com/products/protein-collagen/hemp-protein/grades/hemp-protein-vs-pea-protein/ Reviewed: 2026-11-20 Hemp protein and pea protein are both plant proteins, but the catalogue materials sit at different densities: hemp is a 50% concentrate with up to 10% fat and 10% fibre, while pea is an 80% isolate with most fibre and fat removed. Hemp is high in arginine and low in lysine; pea is the reverse. The label has to state the source and the fibre, the specification has to state the protein factor, and the two are not interchangeable gram for gram. In one lineHemp and pea protein are both plant proteins, but they sit at different protein densities, carry different fibre loads and use different nitrogen factors, and those three facts decide the label. ## Protein density and what comes with it The catalogue materials are not the same grade. Hemp is a 50% concentrate at ≥50.0% protein on a dry basis, N × 5.7, fat ≤10.0% and fibre ≤10.0%. Pea is an 80% isolate at ≥80.0%, N × 6.25, fat ≤2.0% and ash ≤5.0%, with most of the fibre and starch removed. The comparison is a concentrate against an isolate, which is how the two appear on a specification. Hemp protein and pea protein isolate · catalogue limits side by side | Point | Hemp protein | Pea protein isolate | Protein, dry basis | ≥50.0% (N × 5.7) | ≥80.0% (N × 6.25) | Protein, as-is at the moisture limit | 46.5% at 7.0% | 73.6% at 8.0% | Powder for 20 g protein | 43.0 g | 27.2 g | Fat | ≤10.0% | ≤2.0% | Fibre | ≤10.0% | Largely removed; no fibre line in the catalogue | Ash | ≤6.0% | ≤5.0% | Major allergen | No; hemp is not on the lists | No; pea is a legume but not on the lists | Hemp-specific limit | THC 3.0 mg/kg in the EU for seed-derived products | None The protein gap is 15.8 g of powder per 20 g of protein. In a 30 g stick, the hemp concentrate cannot deliver 20 g of protein at all; the pea isolate can. That is a serving-size fact, not a quality judgement, and it decides which grade fits the format. ## Amino acids: two different limiting points Both contain all the indispensable amino acids and both have a limiting one. Hemp is high in arginine and low in lysine; a published hemp protein isolate reports about 15 g arginine and 2.5 g lysine per 100 g protein, with tryptophan also low. Pea is high in lysine and low in methionine and cysteine. The published PDCAAS for hemp seed products is around 0.5–0.6, commonly limited by lysine; pea scores higher because its lysine is strong, though its sulfur amino acids remain limiting. Amino acid markers · hemp against pea | Amino acid marker | Hemp | Pea | Consequence | Arginine | High, about 15 g/100 g protein | Lower | Hemp carries more of the arginine | Lysine | Low, about 2.5 g/100 g protein | High | Hemp is the limiting side for lysine | Methionine + cysteine | Moderate, about 5.5 g/100 g protein | Low | Pea is the limiting side for sulfur amino acids | Tryptophan | Low in some isolates | Moderate | Check the profile, not the headline | PDCAAS | About 0.5–0.6 | Higher | A blend can complement the two The profiles are complementary, which is why blends exist. A blend is a new specification: the amino acid profile, the protein factor and the ingredient statement all change. A “complete protein” claim needs a substantiated basis; the word has no defined legal meaning, and hemp alone is not the strongest basis for it. ## Fibre and the carbohydrate panel Hemp carries up to 10.0% total dietary fibre; the pea isolate has removed most of it, and its carbohydrate by difference is largely residual starch, sugar and ash. In the EU, fibre is declared separately from carbohydrate, so hemp fibre is a line of its own; in the US, fibre sits inside total carbohydrate, with dietary fibre as a sub-line. The same powder produces a different carbohydrate panel in the two markets. Fibre is also functional: it binds water, adds body to a bar, slows dispersion and can make a drink grainy. At 43 g of hemp powder per 20 g of protein, the serving can carry up to 4.3 g of fibre; at 27.2 g of pea isolate, it is a small fraction of that. If the product wants a fibre claim, hemp contributes; if it wants a clean carbohydrate line, pea is easier. ## Allergens and the source statement Neither hemp nor pea is on the EU, US or UK major-allergen lists. That means no mandatory emphasis and no “Contains” statement, but the source cannot be left out: the ingredient list has to name the protein, and “plant protein” alone is incomplete. Pea is a legume, and legume allergy is real; cross-reactivity with peanut and lupin has been reported, so a pea product needs a pea statement and a cross-contact record. Hemp allergy is less common but possible, and hemp pollen allergy is a different question. Hemp's regulatory marker is THC, not an allergen; pea's is the legume statement. A shared line with soy, wheat, milk, egg or peanut needs cleaning validation and, where risk remains, an advisory statement. ## Label wording for either source In the EU, the ingredient list names the source and the form: “hemp seed protein” or “pea protein isolate”. The nutrition declaration shows protein, fat, carbohydrate and salt, with fibre where a fibre claim is made; the protein figure is as-is, consistent with the factor and the moisture. The claim thresholds are 12% of energy for “source of protein” and 20% for “high protein”; fibre is 3 g/100 g for “source of fibre” and 6 g/100 g for “high fibre”. In the US, the Supplement Facts panel declares protein and dietary fibre in grams with the Daily Value percentages; “good source” starts at 10% of the Daily Value and “excellent source” at 20%, on a protein Daily Value of 50 g and a fibre Daily Value of 28 g. The DSHEA disclaimer and supporting evidence are needed for structure/function wording. In both markets the protein factor belongs in the specification: a 50% hemp figure and an 80% pea figure are not comparable without it. ## Which one fits Choose hemp protein when the formula can carry the fat and fibre, when the earthy flavour suits the matrix, when 43 g of powder per 20 g of protein fits the serving, and when the THC file is in place for the destination. Choose pea isolate when the serving needs a high protein density, when the fibre and fat have to stay low, when a neutral flavour matters, or when the hemp THC file is not available for the market. A blend can use the amino acid complement and the fibre together, but it is a new specification with two sources and one nutrition panel. Neither choice is a health statement; it is a statement about protein density, fibre, flavour and the documents the market requires. The hemp product page and the pea product page carry the catalogue limits; the hemp compliance page covers the THC file; the pea compliance page covers the legume statement; the methods index covers the tests; the quality page describes the release workflow. ### 03 Hemp protein: what limits shelf life in the drum and in the bar URL: https://nutrition.rainwoodbio.com/products/protein-collagen/hemp-protein/stability/ Reviewed: 2026-11-20 Hemp protein is a dry powder, but the powder is not uniform: it carries fat and fibre beside the protein. The fat oxidises, moisture causes caking and browning, and light and heat accelerate both. The pack and the storage condition define shelf life; the protein figure on the certificate does not. In one lineThe protein is not the fragile part; the fat, the moisture and the pack decide how long a hemp protein lot keeps. ## The powder: fat, moisture and light The catalogue allows 10.0% fat and 7.0% moisture. Both are release limits, not storage headroom. The fat in hemp protein contains polyunsaturated fatty acids, which react with oxygen; the first sign is usually a rancid or paint-like smell, followed by a rising peroxide value. The protein result can stay flat while the flavour is already failing. Moisture moves the other way. A sealed pack at 7.0% is stable; an opened pouch in humid air gains water, cakes and disperses poorly. Water also lets lysine and reducing sugars react, so browning and a loss of available lysine can follow. Chlorophyll responds to light, and the green cast can fade or darken before the protein moves. Store the powder sealed in its foil pouch or an opaque moisture-barrier container, in a cool dry place. A clear jar is an exposure. Let a cold pack warm to room temperature before opening, to keep condensation off the powder. ## The dispersion: opaque, not a solution In water, hemp protein forms an opaque, slightly grainy dispersion; it does not dissolve. The dispersion sediments, and the fat can separate and oxidise at the surface. Heat adds aggregation and, in a concentrated mix, gelation, so a pasteurisation step has to be designed with the protein in mind rather than added at the end. Solubility is lowest near the isoelectric point, where sedimentation is fastest. A stable drink needs the pH, homogenisation pressure, stabiliser system and heat load set together, followed by a hold-time study. Bulk-powder data does not carry over to a drink: the matrix, the process and the pack all change the rate. ## What drives change Factors that move hemp protein during storage | Factor | Effect | Control | Oxygen | Fat oxidation; rancid odour; colour change | Nitrogen flush; low headspace; sealed pack | Light | Chlorophyll fading; fat oxidation | Opaque or foil pack; dark store | Moisture | Caking; browning; mould risk | Moisture-barrier pack; desiccant; dry store | Heat | Faster oxidation; protein aggregation | Cool store; controlled process temperature | pH and metal ions | Low solubility near the isoelectric point; colour and oxidation | Formulate pH; avoid iron and copper contact | Time | All of the above accumulate | Assign a retest period from data These factors reinforce each other. Warmth, light and humidity together do more damage than three separate stresses; a clear-glass dispersion at the wrong pH adds them all. The question is never whether hemp protein is stable in general; it is which pack, which condition and which time. ## Designing a stability protocol Name the pack, the condition, the time points and the tests, or the protocol cannot be audited. Long-term 25 °C/60% RH and intermediate 30 °C/65% RH model the warehouse; 40 °C/75% RH stresses the pack. A light-exposure arm is needed because a dark incubator cannot see the chlorophyll and fat damage. At each point, test protein (with factor and basis), moisture, fat, peroxide value, free fatty acids, colour, dispersibility and microbiology. Add a sensory check: a peroxide value can pass while the flavour has gone. A bar needs water activity and texture; a drink needs pH, sedimentation and the heat process. Request data for the exact pack on the order, not for a sister pack. The 25 kg drum and the 1 kg pouch differ in headspace, surface-to-volume ratio and how often they are opened. ## The finished formula changes the shelf life A bar has low water activity, but its sugars, fat and humectants still redistribute moisture and can brown the protein. Hemp fat can oxidise inside the bar, and the fibre can harden the texture. On a stick pack the seal is the weak point: a single pinhole is enough, so the strip is checked as well as the powder. Neither format can borrow the bulk pouch's shelf life. A drink combines oxygen, light, heat and pH, and hemp protein adds sedimentation and fat separation. Whether an overage or an antioxidant is needed is a formulation call; it belongs in the label and stability file, and it cannot compensate for a pack that admits moisture. A capsule or tablet is dry but hygroscopic, so the shell and excipients need their own moisture check. ## How the retest period is assigned There is no single shelf-life figure for hemp protein. The pack and the storage condition are what set it, and the specification states the retest period that the stability file supports. A figure that names no pack, condition or test panel is a claim, not data. Before extending use beyond the retest period, re-test the retained sample. Extension is never automatic, and a bulk figure does not follow the powder into a repacked container. Pack details are on the product hub; release tests on the COA page; pack and lead time on the MOQ page; test methods in the methods index; the release workflow on the quality page. ### 04 Hemp protein: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/protein-collagen/hemp-protein/moq/ Reviewed: 2026-11-20 Hemp protein ships from a 1 kg foil pouch and a 25 kg fiber drum. The minimum order is 1 kg, and a standard pack is dispatched in 1–7 days. Before a quotation can be compared, the buyer needs to fix six points: the grade and hemp source, the protein factor and basis, the quantity and pack, the destination and Incoterm, the document set, and the finished product and market. In one lineThe 1 kg pouch is the smallest lot-tied pack; the 25 kg drum is the production unit, and the specification, source and THC statement settle before the quantity. ## Why the minimum order is 1 kg One kilogram is a lot-tied commercial pack. It is large enough for a bench trial, a retained sample and an independent check of protein, fat, fibre, THC and microbiology, and small enough to move by air parcel. The lot code is the point: the powder in the pack can be traced to a certificate. Smaller quantities are split from a larger lot. Repacking adds handling, destroys the original pack identity and weakens traceability; the powder itself is unchanged. The 25 kg drum cuts work per kilogram while tying up stock and storage time. The minimum is set by the pack, not by a volume target. ## Packs and pack formats Standard hemp protein packs | Format | Net weight | Use | Notes | Foil pouch | 1 kg | Bench trial, sample, small batch | Foil laminate; close the pouch after use | Fiber drum | 25 kg | Production | Lined board; the liner carries the lot code | Granulated 50% | On request | Flow and dust control | Coarser particle; same protein and fat caps | Higher-protein grade | On request | Compact servings | New specification and lead time The catalogue powder is milled to 80 mesh, with ≥95% passing. A granulated 50% grade or a higher-protein concentrate is a new specification, not another bag size. A coarser particle, or a grade with less fat and fibre, has to be raised before the quotation; it changes the particle-size line and may change the lead time. Each pack carries the product name, grade, lot number, net weight, storage condition and the hemp and THC statements the destination needs. Light and moisture protection comes from the foil pouch; in the drum it comes from the liner. Once the liner is opened, the liner is the barrier, not the board. ## Dispatch and transit Dispatch takes 1–7 days from confirmation. The window covers picking, paperwork and dispatch. Freight, customs and the customer's release are outside it. A custom granulation or a different grade takes longer, and the quotation should say how much longer. Get a dispatch date as well as the range. The pouch is small enough for a parcel; the drum is pallet freight. The Incoterm decides who books the freight and who handles customs clearance. Send the COA and the lot documents with the powder, not after it. ## What a quotation has to answer Six points let two offers be compared: - Product and source. Hemp seed protein, Cannabis sativa L., with the grade and plant part named. - Specification. Protein factor and basis, fat, fibre, moisture, ash, particle size, metals and micro. - Quantity and pack. Pouch (1 kg) or drum (25 kg), granulated grade or higher-protein grade. - Destination and Incoterm. Country and delivery address. - Documents. COA, specification, SDS, allergen and GMO statements, THC and cadmium results, and any organic certificate. - Intended use and market. Food or supplement, the finished product, and the country of sale. A quotation that omits the grade, the factor or the THC statement cannot be compared. One destination may accept the powder while another rejects it; the paperwork is part of the purchase. Commercial terms are on the quotation, not on this page. ## A sample has to be traceable to a lot The 1 kg pack is the lot used for qualification. Check protein, fat, fibre, moisture, THC and THCA, cadmium, heavy metals and microbiology before scale-up, and retain a sample from that pack. Pack, certificate and quotation should carry the same lot code. Without that link, the sample is a demonstration. A trial below 1 kg is a repack. It comes out of a bulk lot, has its own handling record, and is not the 1 kg catalogue pouch. Any split needs written confirmation, and its lot code belongs with the trial data. Bench powder and production powder can come from different lots and still meet the same specification. ## Terms to settle before ordering The quotation should carry the commercial and quality terms together: Incoterm, pack, dispatch window, specification revision, one COA per lot, a retained sample, a retest period and a change route. Record them in a quality agreement before production begins; a dispute is a bad moment to design the process. For hemp protein, add the THC statement and limit, the cadmium result, the allergen and GMO statements, the pesticide screen if required, and the organic certificate if claimed. A failed lot is decided by a joint re-test on the named method, using the retained sample; a photograph of the drum decides nothing. Name the referee laboratory and who pays for it in the quality agreement. Pack details are on the product hub; release tests on the COA page; market files on the compliance page; the term itself in the MOQ glossary; and the release process on the quality page. ### 05 Where hemp protein is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/protein-collagen/hemp-protein/compliance/ Reviewed: 2026-11-20 Hemp protein is a food ingredient from the seed of Cannabis sativa L., not a drug or a cannabinoid extract. The regulatory question is narrower than the plant: whether the seed-derived material is permitted in the destination, what THC limit applies, how protein and fibre are declared, and which claims the finished product can carry. That decision sits with the buyer's regulatory team. In one lineHemp seed protein is a food ingredient, not a drug; the file has to show the seed-only source, the THC result, the protein basis and the destination route. ## What the file contains Four elements sit at the centre of the file: the specification version for the grade, the lot certificate, the destination rules for the ingredient and the finished product, and the change record for source, process and pack. The COA, TDS and SDS cover the lot, the specification and handling; the destination route is separate. The first distinction is the plant part. This material is seed protein, made from hulled, defatted hemp seed, not an extract of the leaf or flower. The file should show the seed-only source and process, because the regulatory treatment of leaf and resin is different. ## European Union In the EU, hemp seed and seed-derived products with a history of consumption before 1997 are not novel foods. The Novel Food Catalogue and member-state assessments cover ground seeds, defatted seeds, seed cake, seed oil and hemp seed protein, provided the material comes from varieties listed in the EU Catalogue. That is the route for a seed protein, not for leaf or resin; check the current entry for the exact product and variety. The hemp-specific limit is THC. Regulation (EU) 2023/915, Section 2.6, sets 3.0 mg/kg for ground hemp seeds, (partially) defatted hemp seed and other processed seed products, expressed as Δ9-THC equivalents (THC + 0.877 × THCA); hemp seed oil has a separate limit of 7.5 mg/kg. Hygiene, labelling, contaminant and general food-law rules apply in addition to those entries. Framework texts are gathered in the EU regulatory notes. ## United States In the US, the 2018 Farm Bill defines hemp as Cannabis sativa L. with no more than 0.3% Δ9-THC on a dry-weight basis and removes it from the Controlled Substances Act. FDA evaluated GRN 771 for hemp seed protein and raised no questions, alongside GRN 765 for hulled hemp seed and GRN 778 for hemp seed oil, for general food use excluding USDA/FSIS products and infant formula. For a supplement, the DSHEA framework and the Supplement Facts panel apply, and the supplier should state the basis on which the ingredient is offered. Hemp is not a major food allergen under FALCPA, and it is not on the EU or UK allergen lists. It still has to be named in the ingredient statement, and a shared line with soy, wheat, milk, egg or peanut needs a cross-contact control. Structure/function wording needs evidence and the DSHEA disclaimer; a disease claim is not available. ## United Kingdom Great Britain applies its own novel-food framework. Hemp seed and seed-derived products with a pre-1997 history are treated as non-novel, subject to the current GB Novel Food Catalogue and the variety conditions; check the current GB text. Northern Ireland follows the EU rules, including the THC limits in Regulation (EU) 2023/915 as they apply there. Which file applies follows the delivery address, so record that choice with the order. Labelling follows the Food Information Regulations 2014 and the same 14-allergen list; hemp is not on it. Hemp cultivation is licensed separately, but that licence concerns growing the plant, not a seed-derived food ingredient. ## Contaminants and limits Contaminant limits belong to the finished product, not to the drum. Hemp takes up cadmium and lead from the soil, and the powder can concentrate them, so cadmium belongs on every lot. The current destination text and the daily intake set the final figure. Limits to check against the finished-product dose | Parameter | Typical reference | What to put in the file | THC and THCA | 3.0 mg/kg as Δ9-THC equivalents in the EU for seed-derived products | Lot result, method, limit and the dose calculation | Cadmium (Cd) | 1.0 mg/kg catalogue limit; the destination entry may be lower | Lot result and the processing factor that applies | Lead (Pb) | 3.0 mg/kg | Lot result and method | Mercury (Hg) | 0.10 mg/kg | Lot result and method | Arsenic (As) | 2.0 mg/kg in the catalogue; not harmonised in the EU | The agreed limit and the method | Microbiology | APC, yeast and mould, E. coli, Salmonella | The lot count and its absence result The catalogue cadmium limit is not automatically the food limit. EU oilseed entries can be lower, and a processing factor may apply to a derived product; confirm the current entry rather than assume the catalogue number clears it. ## Label and claims As of this review, the EU protein claim thresholds are 12% of energy for “source of protein” and 20% for “high protein”; fibre is 3 g/100 g or 1.5 g/100 kcal for “source of fibre” and 6 g/100 g or 3 g/100 kcal for “high fibre”. The nutrition declaration shows protein and fibre; the percentages are calculated on the finished product, not the powder. In the US, “good source” starts at 10% of the Daily Value per serving and “excellent source” at 20%, with a protein Daily Value of 50 g and a fibre Daily Value of 28 g. Evidence and the DSHEA disclaimer are needed for structure/function wording. “Plant-based” and “complete protein” are not defined categories; a “complete protein” statement needs an amino acid basis, and hemp is commonly limited in lysine. “THC-free” is a statement about a limit of detection, not a synonym for “hemp”; if it is used, the limit and method should be on file. Language that implies a cannabinoid effect is a claim about the finished product, outside the specification. The certificate stands behind the material; it does not stand behind the claim. ## Documents for the file The file should contain a COA with protein by Kjeldahl (factor and basis), fat, total dietary fibre (method stated), moisture, ash, heavy metals, microbiology and particle size. Add the amino acid profile, the THC and THCA result by LC-MS/MS, the cadmium result, the pesticide screen where required, and the source and process description. Add the TDS, SDS, allergen and GMO statements, the origin record, the residual-solvent statement if a solvent was used, the organic certificate if claimed, and the specification revision. The product page carries the catalogue specification; the methods index covers the test methods; the quality page describes the release file. ## Checklist before the first order - The plant part is named: hemp seed, hulled and defatted, not leaf or resin. - The grade, protein factor and dry basis are on the specification. - The THC and cadmium results are on file against the destination limit. - Allergen, GMO, origin and pesticide paperwork is in place. - Label and claim wording has had a destination review. - Change control covers the source, the process and the pack. - One version should run through quotation, specification and certificate. Framework references are in the EU, US and UK notes. ### 06 How we prove a hemp protein lot is hemp seed protein URL: https://nutrition.rainwoodbio.com/products/protein-collagen/hemp-protein/identity/ Reviewed: 2026-11-20 A hemp protein lot is the named material when four lines agree: the protein figure carries the hemp nitrogen factor and dry basis, the amino acid profile has the shape of hemp seed protein, the source DNA is Cannabis sativa, and the mass balance around fat, fibre, ash and moisture adds up. The protein percentage alone cannot separate hemp protein from pea, soy or a nitrogen-spiked blend. In one lineA hemp protein lot is proved by four agreeing measurements: the nitrogen factor, the amino acid profile, the source DNA and the mass balance around fat, fibre and ash. ## Four checks on the powder Naming the right material on paper does not prove that the powder is that material. The four checks below test the powder itself, and each needs its own evidence. An answer that stops at the name is a paperwork answer. Four checks on a hemp protein lot | Check | Question | Test | What it establishes | Protein basis | Is the factor and dry basis stated? | Kjeldahl, N × 5.7, dry basis | The protein figure | Amino acid profile | Does the protein look like hemp? | Amino acid profile and SDS-PAGE | The protein family | Source DNA | Is the plant Cannabis sativa? | PCR or DNA barcoding | The species | Mass balance | Is the powder diluted? | Protein, fat, fibre, ash, moisture | Consistency of the numbers DNA survives processing unevenly, so a PCR result needs a positive control and a sample that still amplifies. A negative PCR on a heavily processed powder is not proof that hemp is absent. ## The nitrogen factor and the amino acid ratios The protein figure is nitrogen multiplied by a factor. Hemp is specified here at N × 5.7; the general food factor is N × 6.25. The same nitrogen multiplied by 6.25 reports about 9.6% more protein, so a 50.0% hemp result under N × 5.7 becomes 54.8% under N × 6.25. The factor is a convention, not a purity measure, and it must be on the certificate and the quotation. The amino acid profile is the second ratio. Hemp seed protein is high in arginine and low in lysine; a published hemp protein isolate reports about 15 g arginine and 2.5 g lysine per 100 g protein, with tryptophan also low. Pea protein runs the other way: high lysine, low methionine and cysteine. A blend moves the ratios toward the middle, and a nitrogen spike moves the crude protein without moving the amino acid sum. Amino acid markers · hemp seed protein against pea protein | Marker | Hemp seed protein | Pea protein | What a shift means | Nitrogen factor | N × 5.7 (catalogue) | N × 6.25 (catalogue) | A different factor changes the declared protein | Arginine | High, about 15 g/100 g protein | Lower | A drop suggests dilution or another source | Lysine | Low, about 2.5 g/100 g protein | High | A rise suggests pea or another legume | Methionine + cysteine | Moderate, about 5.5 g/100 g protein | Low | A rise suggests a cereal or a blend | Tryptophan | Low in some isolates | Moderate | A very low value fits hemp The table is a fingerprint, not a specification. The absolute values move with variety, dehulling and processing, so the laboratory should compare the lot with a reference profile and with the declared source, not with a single number copied from a paper. ## What X-ray diffraction can and cannot show XRD tests the solid state: whether the powder is crystalline and whether the pattern matches a reference. A protein powder is largely amorphous, so the expected pattern is a broad halo rather than sharp peaks. A crystalline spike can point to an adulterant such as lactose, melamine, urea or a salt, or to a crystalline fibre fraction. It does not measure protein and it does not distinguish hemp from pea. Before accepting a “match” statement, request the reference diffractogram and the detection limit. On a disputed lot, XRD, the amino acid profile and the DNA test together outweigh any single result. Hemp protein does not need XRD at release; a “conforms” line without the pattern adds little. ## How adulteration shows up The likely substitutions are other seed proteins, a fibre or starch filler, a nitrogen source that is not protein, or a leaf and resin fraction that changes the cannabinoid profile. Each has a different signal. The table below is a starting point, not a complete screen. Common hemp protein substitutions and the signals | Substitute | Effect | Signal | Test | Pea, soy, rice or wheat protein | Raises the protein figure; changes the amino acid pattern | Lysine or methionine shift; foreign bands on SDS-PAGE | Amino acid profile, SDS-PAGE, PCR | Maltodextrin or starch | Dilutes protein; adds carbohydrate | Protein and ash low; crystalline or starch peaks | Mass balance, XRD, microscopy | Fibre or hull powder | Raises fibre; lowers protein | Fibre high; colour greener; ash up | Fibre, ash, microscopy | Melamine or urea | Raises Kjeldahl nitrogen without protein | Amino acid sum far below crude protein | Amino acid profile, HPLC, NMR | Leaf or resin fraction | Adds cannabinoids and chlorophyll | THC or THCA above the limit; colour dark | LC-MS/MS, THC statement | Colourant | Matches the green tint | Colour without a chlorophyll spectrum | UV-Vis, HPLC Appearance is the weakest evidence. Hemp protein ranges from off-white to light tan with a green cast, and a dye can reproduce it. What carries weight is the amino acid ratio, the DNA result, the THC profile and the mass balance. Appearance and protein alone leave the obvious substitution untested. ## Identity lines for the specification - “Hemp seed protein, Cannabis sativa L., from hulled, defatted seed; 50% concentrate.” - “Protein ≥50.0% on a dry basis by Kjeldahl, N × 5.7.” - “Identification: protein profile conform by SDS-PAGE and amino acid profile.” - “Fat ≤10.0%; total dietary fibre ≤10.0%; ash ≤6.0%; moisture ≤7.0%.” - “THC and THCA within the destination limit; cadmium and the heavy-metal panel as listed.” - “No foreign protein, no added nitrogen source and no leaf or resin fraction.” - “Cannabis sativa specific PCR on request; retained sample per lot.” ## Questions to put to the supplier - Which plant part and variety is this lot, and was the seed hulled and defatted? - What protein factor and basis are on the certificate, and what is the as-is figure? - Will you send the amino acid profile and the SDS-PAGE, not just the protein percentage? - What are the THC, THCA and cadmium results for this lot, and which methods were used? - Would you agree to a joint re-test of the retained sample if the lot were disputed? Five answers of that kind make an identity file; a protein percentage alone does not. The product hub carries the catalogue specification; the COA page maps each figure on the lot certificate; the grades page sets out the powder grades; the compliance page covers the THC limits; the XRD method note explains the solid-state test. ### 01 What the COA for milk protein concentrate actually contains URL: https://nutrition.rainwoodbio.com/products/protein-collagen/milk-protein-concentrate/coa/ Reviewed: 2026-11-20 The certificate for a milk protein concentrate lot lists the protein figure by Kjeldahl with its factor and its basis, the moisture that converts it to the powder as weighed, then fat, lactose, ash, the contaminant panel, microbiology and particle size. Each line carries the method and the release limit, and the grade belongs on the certificate too: the 70 and the 85 grades do not share a protein floor. In one lineThe protein figure is a nitrogen measurement: the grade, the N × 6.38 factor and the dry basis decide the number, and fat, lactose and ash describe what else is in the drum. ## The parameter list Milk protein concentrate has no CAS number, because it is not a single substance. It is the protein of skim milk — casein and whey — dried with the lactose, fat and minerals the separation left behind. The certificate is a composition sheet, and protein is only the first line. Composition and physical parameters · milk protein concentrate 80 | Parameter | Method | Release limit | Appearance | Visual | Off-white to light tan powder | Protein, dry basis | Kjeldahl, N × 6.38 | ≥80.0% | Moisture | Loss on drying | ≤6.0% | Fat | Solvent extraction | ≤2.0% | Lactose | HPLC | ≤5.0% | Ash | Gravimetric, furnace | ≤7.0% | Particle size | Sieve analysis | ≥95% through 80 mesh Contaminants and microbiology · milk protein concentrate 80 | Parameter | Method | Release limit | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and enrichment | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent The grade sits above the sheet. The catalogue line here is the 80 grade: protein ≥80.0% dry basis, fat ≤2.0%, lactose ≤5.0%, ash ≤7.0%. A 70 grade has a lower protein floor and more lactose and ash; an 85 grade has less. The grade comparison sets out what moves, and a certificate without the grade number cannot be matched to the purchase order. ## Dry basis, as-is and the nitrogen factor Kjeldahl digests the sample, traps the nitrogen released and multiplies by 6.38, the dairy convention that assumes nitrogen is about 15.7% of milk protein. The protein percentage is a calculation from that nitrogen, and the calculation has two variables that must be printed. The first is the basis. An 80.0% dry-basis result on a lot with 6.0% moisture is 75.2% of the powder as weighed; the same 80.0% at 4.0% moisture is 76.8%. Both lots can be released against the same catalogue line and they deliver different amounts of protein per kilogram, so the moisture belongs beside the protein. The second is the factor. 6.38 is the dairy convention and 6.25 the general food convention; the same nitrogen read through 6.25 returns a figure about 2% lower. A certificate without the factor cannot be compared with one built on a different factor, and the gap is wider than the batch spread a buyer is trying to control. Fat, lactose and ash are reported as-is; a page that carries a dry-basis protein beside an unlabelled fat has invited the reader to subtract one from the other. ## Release limit versus batch result A release limit is the acceptance boundary for the lot; a batch result is what the laboratory measured. Both belong on the page, in separate columns, with the method named. A result column that repeats the limit is not a result. What the result column should contain | Parameter | Release limit | Result column | Protein | ≥80.0% dry basis, N × 6.38 | A measured percentage, with the nitrogen result and the factor | Moisture | ≤6.0% | A measured percentage, from which the as-is protein is calculated | Fat and lactose | ≤2.0% and ≤5.0% | A measured percentage for each, as-is | Ash | ≤7.0% | A measured percentage, as-is | Heavy metals | Per element | A figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot “Passes specification” is a conclusion the reader should be able to reach from the numbers. For a dairy protein the result that matters most is not always a metal: melamine or urea raises the Kjeldahl result without raising the protein, so a certificate that reports only the percentage has shown that the powder contains nitrogen. The identity page covers the amino-acid check that closes that gap. ## What moves between batches Milk is a seasonal raw material. Fat and lactose follow the lactation curve and the feed, ash follows the mineral balance, and a winter lot and a summer lot from one plant can differ enough in lactose and fat to change a bar or a drink. The supplier’s own range allows for this, which is why a comparison should use results rather than the range. The process adds variation: ultrafiltration and diafiltration decide how much lactose and ash are removed, the heat step decides how much whey protein is denatured, and the dryer and the sieve set the particle result. None of that changes the grade name, and each can change how the powder behaves in the customer’s mixer. Read the trend across lots rather than one result: ash climbing, lactose climbing or moisture creeping says more than a lot at the edge of the range, and a markedly darker lot can point to a harder heat step or to browning while protein, fat and lactose all pass. ## When to order an outside test Order an independent test for a new source, a first shipment, a grade claim the certificate does not prove, or a disputed result. The useful panel is protein by Kjeldahl with the factor stated, moisture, fat, lactose, ash, the metal panel, microbiology and a total amino-acid profile. The amino-acid sum is the direct check on the protein figure: a nitrogen-rich adulterant lifts the nitrogen without lifting the amino acids. Add a casein-to-whey separation when the material is claimed to be milk protein concentrate rather than a whey or casein product; caseins precipitate at pH 4.6 while the whey proteins stay in solution, so the fractions can be weighed separately. Add melamine and cyanuric acid screens for a dairy lot from a source with no history. Ask the laboratory to report its detection limit for every screen; a “not detected” line without a limit is evidence about the method, not the sample. Keep the tested pack as the retained sample and put the lot code on the report. ## What to compare between suppliers Put seven points side by side: grade and protein with the basis and the factor; moisture; fat, lactose and ash as separate results; the heat treatment; particle size and whether the grade is instantized; the metal and microbiology results; the pack and the lot code. Two quotations that agree on “80% protein” and differ on lactose, ash or heat treatment are not the same ingredient. The second layer is traceability: the plant, the milk source, the heat step and the dryer. The specification is on the milk protein concentrate product page. The grade options are on the grades page, the ratio against whey protein on the level-four comparison, and the lactose method in the HPLC method note. The release workflow is on the quality page. ### 02 Milk protein concentrate grades: 70, 80, 85 and what changes URL: https://nutrition.rainwoodbio.com/products/protein-collagen/milk-protein-concentrate/grades/ Reviewed: 2026-11-20 Milk protein concentrate is sold by grade — 70, 80 and 85 are the usual protein floors on a dry basis, and milk protein isolate sits above them — and the grade fixes the lactose, ash and fat that come with the protein. It also fixes the physical form: standard or instantized, low-heat or high-heat. The catalogue line on this site is the 80 grade; this page covers what changes across the family, and when another ingredient is the right one. In one lineThe grade is the protein floor plus everything the separation leaves behind: raising the protein lowers the lactose and the ash, and the physical form decides how the powder behaves. ## Why one name covers several materials Skim milk is passed through an ultrafiltration membrane. The membrane retains the casein and the whey proteins and lets water, lactose and soluble minerals through; diafiltration — washing the retentate with water — removes more of them. The retentate is then heat-treated and spray-dried. The protein floor is set by how far the concentration is taken, and the grade number is that floor. Because both protein classes are retained, the casein-to-whey ratio of a milk protein concentrate stays close to the ratio in milk, about 80:20. That is the feature that separates it from whey protein concentrate, where the casein has been removed, and from caseinate, where the whey has. The difference is compositional, not a matter of degree, and it is the subject of the comparison against whey protein concentrate. The grade family exists because the same process run to different endpoints gives powders with different jobs. A 70 grade keeps more lactose and ash and suits a dairy blend; an 85 grade or a milk protein isolate carries more protein per gram and suits a high-protein formula where the lactose and the mineral load have to stay low. ## The grades side by side Milk protein concentrate 80 and what changes across the family | Point | MPC 80 (catalogue) | What changes at 70 or 85 | Protein, dry basis | ≥80.0%, N × 6.38 | Lower floor at 70, higher floor at 85 | Fat | ≤2.0% | Agreed per grade; the milk source sets the starting level | Lactose | ≤5.0% | More at 70, less at 85, because the wash removes it | Ash | ≤7.0% | More at 70, less at 85; the wash removes soluble minerals with the lactose | Casein to whey | About 80:20 of the protein | Unchanged: every grade keeps both classes | Separation | Ultrafiltration and diafiltration | More diafiltration at the higher grades | Usual fit | Bars, drinks, dairy blends | 70 for a dairy base; 85 or isolate where protein per gram rules | Label name | Milk protein concentrate | The grade number belongs in the specification, not on the label Milk protein isolate is the top of the family, at 90% protein or above. It is not a different kind of ingredient: it is the same separation taken further, so the casein and whey are still both present and the lactose and ash are lower again. A buyer who needs the protein without the minerals is choosing the isolate; a buyer who needs the dairy body is usually choosing a lower grade. ## Standard, instantized, and the heat class The catalogue form is a spray-dried powder with ≥95% through 80 mesh. That is a finishing specification, and it decides dust, flow and how quickly the powder wets. An instantized grade is agglomerated so that the particles sink and disperse without lumps; the agglomeration changes the particle-size distribution and the bulk density, and it usually adds lecithin as a processing aid. Lecithin is an ingredient on the finished label, and when it is soy-derived it brings a second allergen question with it. Heat treatment is the other hidden variable. A low-heat process leaves more whey protein in its native state, which matters for gelation and foaming; a high-heat process denatures more of it, changing the flavour, the heat stability and the behaviour in a retort or a bake. The classes are defined through the whey protein nitrogen index, and the numeric boundaries belong to the method agreed. Name the class in the specification rather than assuming it from the grade number. Bulk density, dispersibility and colour are not on the catalogue sheet as release limits, but they are the lines a production trial notices first. Ask for them when the powder has to run on an existing filling line. ## The protein arithmetic per serving A label that declares 20 g of protein needs the as-is protein content of the grade, not the dry-basis figure. At 5.0% moisture, 80.0% dry basis is 76.0% as-is, so 20 ÷ 0.76 = 26.3 g of powder. At 6.0% moisture the same grade gives 75.2% as-is and the weight becomes 26.6 g. The difference looks small on one serving and is not small across a production batch. The rest of the powder is not protein. A 26.3 g scoop of the 80 grade can carry up to about 1.3 g of lactose, 1.8 g of ash, 0.5 g of fat and 1.6 g of moisture at their limits. The lactose is carbohydrate on the nutrition panel and the ash is mineral matter a calcium declaration has to account for, so formulating on protein alone leaves those lines to be found at label review. If the finished product carries a protein claim, the claim is calculated on the whole serving and its energy, not on the ingredient. That calculation is set out on the compliance page, because the threshold belongs to the market and the finished product rather than to the drum. ## What to write into the specification - “Milk protein concentrate, grade 80, protein ≥80.0% on a dry basis by Kjeldahl, N × 6.38.” - “Moisture ≤6.0%; fat ≤2.0%; lactose ≤5.0%; ash ≤7.0%, each reported as-is.” - “Particle size ≥95% through 80 mesh; instantized or standard, stated explicitly.” - “Heat class named, with the whey protein nitrogen method agreed.” - “Lecithin declared if the grade is instantized, with the source named.” - “Milk declared as a major allergen on the specification and on the label.” A quotation that answers “MPC 80” without the physical form and the heat class has answered one of three questions. The COA page shows where each of these lines appears on the certificate. ## When another ingredient is the right one Milk protein concentrate is the wrong choice for a clear acidic drink. The casein coagulates near pH 4.6, so a beverage acidified below that point will sediment or turn gritty however well the powder was dispersed. Whey protein concentrate stays soluble through that range, and it is the ingredient built for it; the whey protein concentrate page carries that specification. It is also the wrong choice when the label has to say whey, when a lactose-free claim has to be supported, or when the formula cannot carry the extra calcium and phosphate that come with the casein. Each is a different ingredient requirement, not a defect in the grade. The stability page covers storage behaviour, and the product page carries the catalogue specification. ### 02.1 Milk protein concentrate vs whey protein concentrate: casein, lactose and the label URL: https://nutrition.rainwoodbio.com/products/protein-collagen/milk-protein-concentrate/grades/milk-protein-concentrate-vs-whey-protein/ Reviewed: 2026-11-20 Milk protein concentrate and whey protein concentrate are different ingredients, not two grades of one. Milk protein concentrate keeps the casein and the whey protein together in roughly the 80:20 ratio found in milk; whey protein concentrate is the whey fraction alone, with the casein removed at the cheese vat. That single difference drives the amino-acid profile, the behaviour at acid pH, the mineral load, the lactose arithmetic and the name that has to appear on the label — and both carry milk as a major allergen. In one lineMilk protein concentrate and whey protein concentrate are not two grades of one ingredient: one keeps the casein, the other has removed it, and the label, the lactose and the acid stability follow from that. ## The casein-to-whey ratio, and what it does to the protein Milk contains about 80% casein and 20% whey protein. Ultrafiltration run on skim milk retains both classes, so a milk protein concentrate carries that ratio at every grade. Whey protein concentrate starts from the liquid left after casein has been precipitated, so its protein is whey protein and nothing else; a caseinate is the mirror image, casein with the whey removed. The ratio changes the amino-acid pattern. The whey fraction is richer in leucine, lysine and cysteine; the caseins carry more glutamic acid and proline and are phosphorylated, which is why they bind calcium and phosphate. A milk protein concentrate therefore sits between the two extremes, and a formula built to a specific amino-acid target cannot be moved from one ingredient to the other without recalculating. Milk protein concentrate 80 and whey protein concentrate 80 · catalogue lines | Point | Milk protein concentrate 80 | Whey protein concentrate 80 | Protein, dry basis | ≥80.0%, N × 6.38 | ≥80.0%, N × 6.38 | Protein classes | Casein and whey, about 80:20 | Whey protein only | Fat | ≤2.0% | ≤6.0% | Lactose | ≤5.0% | ≤5.0% | Ash | ≤7.0% | ≤4.0% | Moisture | ≤6.0% | ≤5.0% | At pH 4.6 | Casein coagulates | Protein stays in solution | Label name | Milk protein concentrate | Whey protein concentrate | Milk allergen | Declared | Declared ## Lactose: the same ceiling, a different arithmetic Both catalogue lines carry a lactose limit of 5.0%, so the ceiling does not separate them; what separates them is where the lactose sits. In a milk protein concentrate it is what the membrane did not wash out; in a whey protein concentrate it is the residual sugar of the whey stream. At the limit, a 26 g serving of either can carry about 1.3 g of lactose, which is carbohydrate on the label. Neither ingredient is lactose-free, and a lactose-free claim is not inherited from a specification: it has its own threshold in the destination market and is measured on the finished product. Where the lactose has to be very low, the usual move is to a whey protein isolate or a lactose-removed ingredient, each a different purchase with a different label. For a low-carbohydrate claim, the comparison uses the lot results for lactose and the serving weight, not the catalogue ceilings; two powders inside the limit can differ by a gram per serving. ## Minerals and the ash figure The ash limit is where the two catalogues diverge most: ≤7.0% for the milk protein concentrate and ≤4.0% for the whey protein concentrate. The difference is the colloidal calcium phosphate that belongs to the casein micelle, plus the minerals that the membrane retained. On a 26 g serving at the limits, that is roughly 1.8 g of ash against about 1.0 g — arithmetic from the specifications, not a batch result. The mineral load matters in three places. A calcium declaration on the label has to include it. A buffering formula feels it, because the casein-bound phosphate resists pH change. And a high-mineral load can be a problem in a clear drink, where the minerals contribute to haze as well as to taste. A whey protein concentrate carries less of this load because the casein, and the minerals bound to it, were left behind. ## What the label has to say The ingredient names are not interchangeable: “milk protein concentrate” and “whey protein concentrate” are two different declarations, and a label written for one cannot be used for the other. Both must declare milk, because milk is a major allergen in the EU and the US; a “dairy-free” claim cannot be supported for either. The compliance page sets out the framework. The protein declaration is calculated the same way on both sides: the as-is protein multiplied by the weight used. At 5.0% moisture, an 80.0% dry-basis protein is 76.0% as-is, so a 20 g declaration needs 26.3 g of either powder. The arithmetic is identical; the ingredient name, the fat, the ash and the protein classes are not. An instantized grade adds a line: agglomeration usually brings lecithin, which has to appear in the ingredient list and, when soy-derived, brings a second allergen consideration. Ask which grade and which lecithin are in the pack before the label is signed off. ## Swapping one for the other in a formula An acidified drink is the clearest case. Below about pH 4.6 the casein in a milk protein concentrate coagulates, so the drink sediments or turns gritty; a whey protein concentrate stays in solution and is the ingredient built for that pH range. Moving a clear acidic beverage from whey to milk protein is a reformulation, not a substitution. Heat and texture behave differently too: a whey protein dispersion foams readily, while a casein-containing dispersion is more viscous, less foaming and gives the dairy body associated with milk. In a bar, the casein fraction contributes structure that can harden over shelf life, so a swap changes the texture panel as well as the nutrition panel. The reverse move has the same character: replacing a whey protein concentrate with a milk protein concentrate in a neutral drink is often straightforward, but it raises the mineral load and changes the ingredient declaration, the fat figure and the amino-acid pattern. It is a new formula with a new label. ## What to write when comparing them - “Ingredient name, grade and protein floor, with the nitrogen factor stated.” - “Casein-to-whey ratio, or a statement that the protein is whey only.” - “Moisture, fat, lactose and ash as separate as-is results.” - “Ash and calcium, when a mineral declaration or a clear drink is involved.” - “Heat class and physical form, including any lecithin.” - “Milk allergen statement and the destination market.” The two catalogue specifications sit on the milk protein concentrate page and the whey protein concentrate page. The grade families are compared on the grades page, the analytical methods are collected under analytical methods, and the release workflow is described on the quality page. ### 03 Milk protein concentrate keeps only while the powder stays dry URL: https://nutrition.rainwoodbio.com/products/protein-collagen/milk-protein-concentrate/stability/ Reviewed: 2026-11-20 Milk protein concentrate keeps when the powder stays dry and the pack stays sealed. The failure modes are physical and chemical rather than microbial: amorphous lactose takes up water and crystallises, the powder cakes, and lysine reacts with lactose through the Maillard reaction until the colour darkens and the solubility falls. A reconstituted dispersion is a different material with a short, validated hold and no shelf life of its own. In one lineMilk protein concentrate fails through water rather than through time: lactose takes it up, the powder cakes, and the lysine reacts with the sugar until colour and solubility change. ## The powder: moisture, lactose and caking The specification stops moisture at ≤6.0%, but that is a release gate, not a licence to store the powder warm and damp. Spray drying leaves part of the lactose glassy and amorphous, and that lactose is eager for water: as humidity reaches it, the sugar crystallises, releases the moisture it had held, and welds neighbouring particles into a cake. A bag that set solid after a summer in a warm warehouse has followed that path; the protein result can still read on specification while the powder is unusable. None of the countermeasures is complicated. Close the liner after every opening, keep the store under 25 °C and below about 65% relative humidity, stand pallets on racks instead of a concrete floor, and keep them off an outside wall. Let a cold pack reach room temperature before the seal is broken, or water condenses onto the powder. A desiccant helps in humid climates but cannot replace an intact sealed liner. Browning is the second change. Lactose is a reducing sugar and the protein carries lysine; with moisture and heat the two react, the colour moves toward tan and brown, and the lysine that has reacted is no longer available. The reaction is slow in a dry powder and quick in a warm, damp one, and a darker lot after storage is evidence of it even when the protein, fat and lactose results are unchanged. ## The dispersion: heat, pH and hold time In water the powder disperses to an opaque, milky liquid, because the casein is present as micelles rather than as a solution. That structure is sensitive to pH: near pH 4.6 the casein reaches its isoelectric point and coagulates, so an acidified drink made with milk protein concentrate will sediment or turn gritty. Heat adds a second limit — a hot hold, a hot fill or a retort step denatures whey protein and can foul a heat exchanger with a protein film. A reconstituted tank is also a microbiological medium. The powder is not sterile, and once water is added the count can rise quickly at ambient temperature. A hold time has to be validated for the plant and the temperature, and a tank left over a weekend is not a stock solution. The microbiology tests on release cover the powder, not the dispersion. When a liquid cannot be avoided, hold the pH away from 4.6, keep heat load modest, deaerate to suppress foam and fat oxidation, and prove the hold time before filling. A powder result cannot be copied into a beverage: the liquid's matrix, its process and its pack all move the rate. ## What drives the change Factors that move milk protein concentrate during storage | Factor | What it does | Control | Moisture | Lactose crystallises; the powder cakes; browning accelerates | Sealed liner; dry store; desiccant where needed | Heat | Raises the browning rate; can reduce solubility | Cool store; controlled process heat | pH | Casein coagulates near pH 4.6 | Formulate away from the isoelectric point | Shear and air | Foam, density change, fat oxidation | Controlled mixing; deaeration | Light | Fat oxidation and off-flavour in a clear pack | Opaque or foil pack; dark store | Time at temperature | Browning accumulates; lysine is lost | Retest period from data for the pack These forces compound. A hot, damp store does more damage than either condition alone, and a clear-glass drink brings pH, heat, light and oxygen together in one container. So the question worth asking is not whether the powder is stable in the abstract, but which pack, under which conditions, for how many months. ## A stability protocol for the ingredient A protocol names the pack, the conditions, the sampling times and the test panel. Run a long-term arm at 25 °C/60% relative humidity (RH), an intermediate arm at 30 °C/65% RH and an accelerated arm at 40 °C/75% RH; the first two model a warehouse, the third stresses the pack and seal. At each point, test protein, moisture, fat, lactose and ash, plus appearance, dispersibility and microbiology. Add a browning marker for a product that will sit for a year. Colour measurement is simple and comparative; free lysine or furosine is the more direct measure of the early Maillard reaction, and it moves before the colour does. Whichever is chosen, the method and the instrument should be fixed at the start so that the points can be compared. Request the stability summary for the exact pack you are buying. A 25 kg fiber drum and a 1 kg foil pouch are opened differently, hold different headspace and expose different surface area per gram, so evidence gathered on one says little about the other. ## The finished formula changes the answer A bar is the hardest common matrix for this ingredient. The bar has a low but not zero water activity, the lactose and the protein are in intimate contact, and the product may spend months at ambient temperature. Browning shows as a colour change and a flavour change; the protein network can also harden with time, so a texture panel at release says little about month nine. A stick pack usually fails at a seam or a pinhole, not across the strip. Moisture enters at that defect, and the powder lumps at the puncture while the rest still looks acceptable. Check the seals and film as well as the powder, and do not leave sticks in a humid filling room beyond the validated hold. A drink brings pH, heat, light and oxygen into play, so the ingredient’s bulk data is only a starting point. Whether to add an overage is the formulator’s call, a label and stability decision; an overage will not rescue a process that keeps the dispersion warm for hours. ## How the shelf life is set No single shelf-life figure is published for this ingredient, because the pack and the storage condition decide it. The retest period assigned to your specification depends on the stability file for the pack you buy. A figure offered without naming the pack, the storage condition and the test panel is a claim, not a shelf life. Once the retest period has passed, re-test the retained sample before any extension, and check moisture and appearance too. A bulk result should not be carried over to a repacked pouch, and an extension should never rest on assumption. The product page carries the pack list; the COA page sets out the batch tests; the MOQ page lists pack sizes and lead time; the microbiology method note explains the count; the quality page maps the release route. ### 04 Milk protein concentrate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/protein-collagen/milk-protein-concentrate/moq/ Reviewed: 2026-11-20 The MOQ for milk protein concentrate is 1 kg, supplied as a 1 kg foil pouch; the bulk pack is a 25 kg fiber drum, and lead time is 1–7 days for the standard 80 grade. A firm quotation needs the grade and the protein basis, the moisture limit, the physical form, the quantity and pack, the destination and Incoterm, and the intended market. In one lineOne kilogram is the smallest order because it is the smallest pack that can carry a lot code, a retained sample and a COA through a trial. ## Why the minimum is 1 kg A 1 kg pack covers a bench trial, a retained sample and an independent check of protein, lactose and ash. It is small enough to ship as a parcel, which matters when a formulator needs material before the production plan is fixed, and it is a commercial unit with its own lot code rather than a scoop from a drum. Below 1 kg the material is split from a larger lot and repacked. That adds handling, breaks the link to the original pack and makes traceability harder without changing the powder. The 25 kg drum is the bulk unit: it reduces handling per kilogram, and it commits inventory and, if it is drawn down slowly, a longer storage period. The MOQ is a pack decision, not a volume incentive. ## Packs and formats Standard milk protein concentrate packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Instantized grade | 1 kg or 25 kg | Drink mixes, dispensers | Lecithin is added; particle profile changes | Custom blend | On request | Dilution or carrier | Different specification and label The catalogue form is a spray-dried powder with ≥95% through 80 mesh. An instantized grade is a different finishing step, not a packing choice: the particles are agglomerated and lecithin is usually added, so the particle-size line, the bulk density and the label all move. Say which form is needed before the quotation, because the answer changes the lead time, the documents and the label. ## Lead time and dispatch The standard pack is quoted at 1–7 days from order confirmation. That window covers picking, document preparation and dispatch; it does not include transit, customs clearance or the customer’s own quality release. An instantized grade, a custom blend or a non-standard pack adds time, and the quotation should state that separately rather than folding it into the standard window. Ask for a dispatch date, not only the range. A 1 kg pouch usually moves as a parcel while a 25 kg drum travels on a pallet, and the Incoterm decides who books the freight and who clears entry. The COA and the rest of the lot documents should travel with the pack, not follow it. ## What a quotation needs Six items make a quotation firm enough to compare: - Product and grade. Milk protein concentrate 80, with the protein floor and the nitrogen factor written out. - Specification. Moisture, fat, lactose, ash, particle size, heat class and the contaminant panel. - Physical form. Standard or instantized, and whether lecithin is present. - Quantity and pack. 1 kg pouch, 25 kg drum, or a custom blend. - Destination and Incoterm. The country, the port or address, and the trade term. - Intended use and market. Food, supplement or another use, and where the finished product will be sold. A quotation that names the product without the form, the heat class and the market is incomplete, because the same powder can fit one destination and sit outside the file for another. Commercial terms are stated on the quotation, not on this page. ## The sample is a lot, not a demonstration The 1 kg pack is the qualification sample. Test protein with the factor, moisture, lactose, ash, fat and microbiology before scaling, and keep a retained sample from the same pack. The lot code on the sample, the COA and the quotation should match; a sample that cannot be traced to a lot is a demonstration, not a qualification. A trial that needs less than a kilogram is a repack, not the catalogue pouch. It leaves a bulk lot, gets its own handling record and cannot be presented later as the 1 kg foil pack. Ask for the split in writing and keep its lot code beside the trial results, because the powder on the bench and the powder in the drum may come from different lots even when the specification is identical. ## Terms to settle before the first order Put the commercial terms and the quality terms on one page: Incoterm, pack, dispatch window, the specification revision, a COA for every lot, the retained sample, the retest period and the route for a change of milk source or heat treatment. Settle those in a quality agreement before the first production order; the same conversation is harder after a dispute. A change of source is not a formality for a dairy protein. A different milk supply or a different heat step can move the lactose, the ash and the behaviour of the powder while the protein result stays inside the range. The agreement should say that such a change is notified before it ships, not after. If a lot misses the agreed specification, the route is the retained sample and a joint re-test against the named method, not a photograph of the drum. The agreement should already name the referee laboratory and say who engages it. A return decided on appearance alone is hard to defend on either side. The product page carries the catalogue specification; the COA page lists the release tests; the grades page covers the forms; the MOQ glossary entry defines the term; the logistics page covers shipping documents; the quality page covers release. ### 05 The regulatory file for milk protein concentrate URL: https://nutrition.rainwoodbio.com/products/protein-collagen/milk-protein-concentrate/compliance/ Reviewed: 2026-11-20 Milk protein concentrate is a dairy ingredient, so its regulatory file is built around three questions: whether the ingredient is permitted in the destination, which limits apply to its composition and contaminants, and how it must be declared on the finished label. Milk is a major allergen in both the EU and the US, and that declaration is mandatory wherever the ingredient is used. The buyer’s regulatory team confirms the route; this page lists the documents and checks that belong in the file. In one lineThe specification describes the powder; the regulatory file shows the route, the limits and the label for the destination, and milk is an allergen that has to be declared in the markets covered here. ## What the file contains The file holds four things at once: the specification revision for the grade, the certificate that releases the lot, the limits and label rules for the finished product, and the record of how source, process and pack changes are handled. The COA reports the lot; the TDS states the specification; the SDS covers handling. None of them settles the destination route, which is recorded separately. Beyond the certificate, the pack should carry the allergen statement, the GMO statement, the origin of the milk, the heat-treatment class and — for an instantized grade — the lecithin declaration. If one of those is missing for the lot, name the gap before the order moves. Keep a versioned document list at the front of the folder. ## European Union In the EU, milk and products thereof, including lactose, are on the allergen list in Annex II of Regulation (EU) No 1169/2011. The declaration has to be emphasised in the ingredient list, and the ingredient name has to reflect what was used: “milk protein concentrate” is the name, not “milk protein” or “dairy protein”. The same regulation fixes the nutrition declaration, where the protein, carbohydrate — including lactose — and fat have to be accounted for. Protein claims are set by Regulation (EC) No 1924/2006. A “source of protein” claim requires protein to contribute at least 12% of the energy value of the food; a “high protein” claim requires at least 20%. The calculation is made on the finished product, using the as-is protein of the ingredient, not the dry-basis figure on the certificate. As of this review those thresholds are the reference; check the current consolidated text. Contaminants sit in Regulation (EU) 2023/915, which replaced Regulation (EC) No 1881/2006 in May 2023; the limits are set per food category and per element. Northern Ireland follows the EU framework, while Great Britain has its own arrangement and labelling rules, so the delivery address decides which file applies. ## United States In the US, milk is one of the major food allergens, and the finished product must declare it — in the ingredient list with the term “milk”, or in a “Contains: milk” statement, under the Food Allergen Labeling and Consumer Protection Act. The declaration is required even when the lactose has been reduced, because the protein is the allergen and it is still present. Protein content is declared on the Nutrition Facts or Supplement Facts panel in grams per serving, calculated from the as-is protein of the ingredient. A “good source” claim needs 10% of the Daily Value per serving and a “high” claim 20%, against a protein Daily Value of 50 g. Structure/function language needs substantiation and the DSHEA disclaimer, and no disease claim is open in either market. ## Contaminants and limits The contaminant panel is a finished-product calculation, not only a drum result. The table below is the starting point for a dairy protein file; the destination text and the daily dose decide the final limit. Contaminants to confirm for a milk protein file | Parameter | Reference | What the file should show | Lead (Pb) | 3.0 mg/kg in the finished supplement | Lot result, method and the conversion to the daily dose | Cadmium (Cd) | 1.0 mg/kg in the finished supplement | Lot result and any category exception | Mercury (Hg) | 0.10 mg/kg in the finished supplement | Lot result and method | Arsenic (As) | Customer or market limit | The agreed limit and the method, stated on the certificate | Melamine | 2.5 mg/kg in food, EU general level | A lot result and the limit cited for the destination | Aflatoxin M1 | Destination limit for dairy | A lot result or a documented exemption Melamine and aflatoxin M1 are the two lines a dairy-specific review adds to the usual metal panel: melamine because the protein figure is a nitrogen measurement, aflatoxin M1 because it is a milk-borne contaminant that a plant-protein specification never mentions. Both belong in the file with the method and the limit. ## Label and claims On the label the ingredient is named “milk protein concentrate”, with the grade in the specification rather than in the ingredient list. The milk allergen statement is mandatory in both markets covered here, and a “dairy-free” or “milk-free” claim cannot be supported for a product that contains this ingredient, whatever the lactose figure. Lactose is a separate question from the allergen. A lactose-free claim has its own threshold in the destination market, and it is measured on the finished product, not inferred from the ingredient specification. The comparison against whey protein concentrate sets out where the lactose and the label name diverge. Protein claims carry their own arithmetic, and the arithmetic has to include every ingredient that contributes protein. A claim written for the finished product is reviewed against the finished product; a certificate supports the material, not the claim. This site publishes the specification and makes no health claim. ## Documents for the file The buyer’s file needs the COA with protein, moisture, fat, lactose and ash, the metal panel and the micro count; the specification revision; the TDS and the SDS; the allergen statement naming milk; the GMO statement; the country of origin of the milk; the heat-treatment class; and the lecithin declaration for an instantized grade. Add the melamine and aflatoxin M1 results where the destination expects them. The specification must name the grade, the nitrogen factor and the dry basis. An 80.0% dry-basis figure and an 80.0% as-is figure are not the same powder, and a file that mixes them will fail a label review. The product page carries the catalogue specification; the EU and US notes collect the framework references. ## Checklist before the first order - Specification version, grade and nitrogen factor are named. - COA, TDS, SDS, allergen, GMO, origin, heat class and lecithin statements are on file. - The milk allergen declaration is written into the finished label. - The contaminant results, including melamine, are converted to the finished-product dose. - The protein claim has been calculated on the finished product and its energy. - Source, process and pack are under change control. - The quotation, the specification and the certificate refer to the same version. The identity page covers the analytical evidence, and the quality page describes the release file behind the certificate. ### 06 How we prove a milk protein concentrate lot is milk protein URL: https://nutrition.rainwoodbio.com/products/protein-collagen/milk-protein-concentrate/identity/ Reviewed: 2026-11-20 A milk protein concentrate lot is the named material when four lines agree: the document names the grade and the nitrogen factor, the nitrogen result fits that grade, the casein-to-whey ratio sits near the ratio of milk, and the lactose and ash are consistent with the separation. No single figure does the job. The protein percentage alone cannot separate this ingredient from skim milk powder, from a whey and caseinate blend, or from a powder that has been diluted. In one lineIdentity is four measurements that agree: the grade and the factor on the paper, the nitrogen in the powder, the casein-to-whey ratio, and the lactose and ash that the separation left behind. ## The layers of identity A certificate can name the right material and still fail to prove it. The four layers below are separate questions, and each needs its own evidence. A supplier who answers only the first has described the paperwork, not the powder. Four layers of milk protein concentrate identity | Layer | Question | Test | What it proves | Document | Is the grade named? | Product name, protein floor, factor | Paperwork only | Protein | Is the nitrogen protein nitrogen? | Kjeldahl and a total amino-acid profile | The protein figure | Composition | Is it milk protein, with both classes? | Casein and whey separation | The ingredient, not a cousin | Mass balance | Is it diluted or spiked? | Lactose, ash, moisture, minerals | Consistency of the numbers ## The casein-to-whey ratio Milk protein is roughly 80% casein and 20% whey protein, and a milk protein concentrate keeps both classes because the membrane retains them together. That ratio is the compositional signature of the ingredient. Whey protein concentrate sits at the other end — its casein has been removed — and a caseinate is casein with the whey removed. A powder that reads 80% protein but carries only one of the two classes is a different ingredient with the same number. The ratio can be measured without specialised equipment. Caseins precipitate at their isoelectric point, near pH 4.6, while the whey proteins stay in solution; the two fractions are separated, each is measured for nitrogen, and the ratio follows. A chromatographic method can also measure the individual proteins — the caseins as a group, and β-lactoglobulin and α-lactalbumin for the whey side — which is more specific and is the better choice when a blend is suspected. A blend of caseinate and whey protein can be built to land on the same ratio and the same protein figure. What it cannot easily match is the rest of the composition: the lactose, the mineral profile and the colloidal calcium phosphate that belongs to an intact casein micelle. That is why the ratio is read together with the ash and the lactose rather than alone. ## X-ray diffraction: what it can and cannot show X-ray diffraction answers a question about the solid state: is the material crystalline, and does the pattern match a reference? A spray-dried milk protein powder is largely amorphous, so its diffractogram is a broad halo rather than a set of sharp peaks. That halo is expected, and it is not an identity test for the protein. Where diffraction earns its place is in the minor components. Crystalline α-lactose monohydrate gives sharp reflections, and its presence shows that the lactose in the powder has crystallised — a quality and stability signal rather than a compositional one. Mineral phases can also be identified, which is useful when a mineral fortification or a lactose crystallisation problem is suspected. For the protein itself, the useful tools are an amino-acid profile and a spectroscopic fingerprint; the XRD method note sets out the sample preparation, and the FTIR note covers the spectroscopic side. A certificate that says only “XRD conforms”, without a pattern or a reference, has added little. Ask what the pattern was compared against before reading the word conforms. ## What substitution looks like Common milk protein concentrate substitutions and the signals | Substitution | What it changes | Signal | Test | Skim milk powder | Lower protein, more lactose | Protein below the grade floor; lactose high | Kjeldahl and lactose | Whey powder or permeate | Removes casein; raises lactose | Casein share falls; ash profile shifts | Casein and whey separation | Caseinate | Removes whey protein | Whey share near zero; sodium rises | Protein separation and sodium | Maltodextrin or starch | Dilutes protein and ash | Amino-acid sum low; carbohydrate high | Amino-acid profile and lactose | Melamine or urea | Raises nitrogen without protein | Kjeldahl high; amino-acid sum normal | Amino-acid profile and specific screens | Plant protein | Changes the amino-acid pattern | No casein or whey proteins detected | Protein separation and profile The strongest single signal is the gap between the Kjeldahl protein and the sum of the amino acids. Protein is made of amino acids; a nitrogen-rich additive is not. A lot whose amino-acid sum recovers markedly less than its crude protein deserves a specific screen before it is released. ## How to write identity into the specification - “Milk protein concentrate, grade 80, protein ≥80.0% dry basis, Kjeldahl N × 6.38.” - “Moisture ≤6.0%; fat ≤2.0%; lactose ≤5.0%; ash ≤7.0%, reported as-is.” - “Casein-to-whey ratio consistent with milk protein; method stated.” - “Amino-acid profile on request, with the sum reported beside the crude protein.” - “Melamine and cyanuric acid screened against the destination limit.” - “Milk declared as a major allergen on the specification.” - “Grade, heat class and physical form named on the certificate.” ## Five questions for the supplier - Which grade is this lot, and what protein floor and nitrogen factor are on the certificate? - What are the moisture, lactose and ash results for this lot, and are they reported as-is? - Can you provide a casein-to-whey separation, and by which method? - Is there an amino-acid profile for the lot, and how does its sum compare with the crude protein? - If the lot is disputed, will you accept a joint re-test on the retained sample? Five direct answers amount to an identity file; a single protein percentage does not. The product page carries the catalogue specification; the COA page shows where each figure sits on the certificate; the grades page explains the protein floors; the whey protein concentrate page is the comparison for a casein-free ingredient; the quality page describes the release file. ### 01 What an NADH disodium COA reports, and what it leaves out URL: https://nutrition.rainwoodbio.com/products/specialty/nadh/coa/ Reviewed: 2026-11-20 An NADH disodium certificate reports appearance, identification by HPLC and UV, assay by HPLC, loss on drying, the heavy-metal panel, microbiology and particle size. The assay is a reduced-form measurement, so it needs both its detection wavelength and its basis on the same line. Loss on drying explains how the as-is figure relates to the anhydrous one, and a sodium result is the line that shows the disodium salt rather than the free acid. In one lineAn NADH certificate is only complete when the assay carries its wavelength and basis, the loss on drying sits beside it, and the sodium figure confirms the disodium salt. ## The certificate as a test report A reader should be able to rebuild the release decision from the page: the parameter, the method, the limit and the result the lot gave. “Conforms” on its own records a verdict with no evidence beside it. Identification and assay answer different questions; one establishes that the peak is the reduced dinucleotide, the other measures how much the lot contains. Identity, assay, moisture and contaminants · NADH disodium | Parameter | Method | Release limit | Appearance | Visual | White to pale yellow powder | Identification | HPLC retention and UV spectrum, 259 and 340 nm | Conforms to the reference | Assay | HPLC with UV detection at 340 nm | ≥95.0% | Loss on drying | Gravimetric | ≤8.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh The wavelength column is not decoration. At 340 nm only the reduced nicotinamide ring absorbs; at 260 nm the adenine ring absorbs in NADH, in NAD+ and in related nucleotides. An assay reported at 260 nm without a separation is closer to a total dinucleotide figure than to an NADH figure. ## Anhydrous basis, loss on drying and the 340 nm assay The catalog limit is ≥95.0% by HPLC, and the certificate has to say on which basis that percentage is reported. On the anhydrous basis the laboratory divides by the dry matter; as-is it reports the powder as weighed. With loss on drying at the 8.0% limit, a lot at 95.0% anhydrous calculates to 87.4% as-is (95.0 × 0.92). The reverse arithmetic shows why the basis cannot be left out: 95.0% as-is with 8.0% water would demand 103.3% anhydrous, which no lot can give. Loss on drying is a gravimetric measure, and it counts all volatile matter rather than water alone. The reduced disodium salt is commonly supplied as a hydrate, so part of the loss belongs to the form itself rather than to a damp warehouse. That is why an 8.0% limit here is not a looser version of the 5.0% water limit used for the oxidised form; it is a different measurement on a different solid. Keep the wavelength and the basis together. A certificate that prints “assay 95.2%” without either cannot be compared with another lot. The 340 nm reading is also the first warning of oxidation, because a lot that has been oxidised back to NAD+ loses absorbance at that wavelength. ## Release limit versus batch result A limit defines acceptance; a result records what the laboratory found. The two belong in separate columns, under a named method. A result column filled with the specification range has restated the gate rather than described the lot. What the result column should contain · NADH disodium | Parameter | Release limit | Result column | Assay | ≥95.0% by HPLC at 340 nm | A measured percentage, with the basis stated | Loss on drying | ≤8.0% | A measured percentage | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Plate count and absence | The count and the absence finding for the lot | Particle size | ≥95% through 80 mesh | The measured percentage through the sieve | Sodium, if measured | About 6.5% on the anhydrous basis | The measured percentage and the method “Passes specification” should be a conclusion the reader can reach from the figures, not a substitute for them. A total heavy-metal figure conceals which element drove it, and a micro statement without a count says nothing about the lot. Sodium is not routine on this catalog sheet, but it is the measurement that separates the disodium salt from the free acid when the form is disputed. ## What moves between batches The production route, the purification, the drying step and the sieving each affect different certificate lines. The route and the purification change colour and assay; drying changes loss on drying; the mill and the 80 mesh sieve change the particle-size result. The mesh figure is a finishing specification, so it can move without any change in the chemistry. Colour is the least quantitative line. White to pale yellow covers a real range, and a batch that is slightly darker is not automatically out of specification. A yellow-brown cast, dark specks or a colour that changes during storage should send the batch to re-test rather than to a discussion about a photograph. Water is the line most exposed to the warehouse. A pouch left open takes up moisture, loss on drying rises and the as-is assay falls even when the anhydrous figure is unchanged. Watch the direction of travel rather than a single point near a limit: assay falling while loss on drying rises points to the pack or the store, not to the molecule. ## When to order an outside test An outside test is worth ordering when a source is new, a regulated shipment is the first, the oxidation state is disputed or the supplier certificate does not prove a salt-form claim. The panel is focused rather than a full repeat: HPLC with dual detection at 340 and 260 nm, loss on drying, sodium by ICP-OES, ICP-MS for the metals and the micro set. The method library describes the separation and the elemental techniques. Add an enzymatic assay when the question is coenzyme activity rather than peak area. A dehydrogenase reaction that consumes NADH, followed as the fall in absorbance at 340 nm, answers a different question from a chromatographic purity result, and it does not replace identity evidence. Ask the laboratory to report its detection limit for every screen. A “not detected” line without a limit describes the method's sensitivity, not the sample. Keep the chain of custody tight: the material tested should be the material kept, and the report should identify the lot. ## What to compare between suppliers Put six lines beside each other: form and CAS number; assay with wavelength and basis; loss on drying; sodium on the anhydrous basis; the 260 nm related-substance profile; and pack, lot code and storage condition. Two offers that both say 95% may still be offering different powders. Catalog values are on the NADH product page. The salt-versus-acid tests are on the identity page, the light, heat and moisture risks on the stability page, the separation in the HPLC method note, and the release workflow on the quality page. ### 02 NADH grades: one salt, two presentations and the oxidised form URL: https://nutrition.rainwoodbio.com/products/specialty/nadh/grades/ Reviewed: 2026-11-20 NADH is supplied as one chemical grade, the reduced disodium salt, in an 80 mesh powder and, on request, a granulate. The grade is fixed by the assay ≥95.0% by HPLC and the loss on drying ≤8.0%; the presentation changes flow, dust and fill behaviour, not identity. The oxidised form, NAD+, is a different product rather than a higher or lower grade. In one lineThe grade is the reduced disodium salt; the presentation changes how the powder flows, and the oxidised form changes the product. ## Why NADH has one grade, not a range NADH has no strength ladder. A buyer chooses a purity specification, a salt form and a particle size, and this catalog fixes all three: the reduced disodium salt, assay ≥95.0% by HPLC, loss on drying ≤8.0%, and ≥95% through 80 mesh. The word “grade” is often used for food, cosmetic or reagent qualities; those labels do not replace a specification, and they do not tell a laboratory what to measure. The form question comes first. NADH is the reduced coenzyme; the commercial ingredient is its disodium salt, which carries two sodium ions and about 6.5% sodium on the anhydrous basis. The free acid is the parent molecule and a different purchase. The oxidised form, NAD+, is a different material again, with its own CAS number and its own assay. An order that says only “NAD” leaves the choice open. ## The catalog powder, a granulate and the oxidised form The first two columns settle the presentation; the third settles the molecule. NADH 80 mesh powder, granulated NADH and NAD+ | Property | NADH powder (catalog) | NADH granulated | NAD+ (different product) | CAS number | 606-68-8 | 606-68-8 | 53-84-9 | Oxidation state | Reduced | Reduced | Oxidised | Assay | ≥95.0% by HPLC at 340 nm | Same limit | ≥95.0% by its own method | Loss on drying | ≤8.0% | Same limit | Water ≤5.0% by Karl Fischer | Particle size | ≥95% through 80 mesh | Coarser; own mesh line | No mesh line in catalog | Flow and dust | Fine and dusty | Freer flow, less dust | Fine powder | Typical format | Capsules, tablets, blends | High-speed filling | Separate project | Sodium | About 6.5% anhydrous | About 6.5% anhydrous | None, free acid The third column is a separate material, not a third grade. Its certificate carries its own methods and limits, and none of its numbers transfer. The two NADH columns share one specification; only mesh and flow differ. ## Powder, water and the granulate The standard powder is white to pale yellow and free-flowing, with ≥95% passing 80 mesh; it dissolves in water to a clear, slightly yellow solution. It is hygroscopic and oxidation-sensitive, so the foil pack and the storage condition are part of how the grade is used, not an afterthought. Granulation buys flow and less dust for a high-speed line, and it can reduce caking in a hopper. It does not buy protection from oxygen or moisture. A granulate has a different particle-size distribution and a different surface, and it needs its own dispersion and mesh lines in the specification. Do not assume that a coarser particle is automatically more stable. Milling and sieving are the steps that set the mesh result. A change of mill or sieve can move the 80 mesh figure without touching the chemistry, which is why the presentation belongs in the specification and on the purchase order. ## Matching the presentation to the dosage form Capsules and tablets use the 80 mesh powder as supplied. A powder blend can use it when the other components are similarly fine and the mix will not segregate. A granulate suits a filling line that has been qualified for larger particles and a room where dust is a problem. A stick pack or drink mix takes the powder because it dissolves, but the water in the finished drink changes the stability question. The fill calculation starts from the assay basis. At 95.0% on the anhydrous basis with 8.0% loss on drying, the powder is 87.4% as-is, so a 100 mg declared amount needs 114.4 mg of powder. If the certificate reports the assay as-is, the water is already in the number and the calculation stops there. The batch record should show which basis was used. An overage is a formulation and label decision, not a grade. Buying a higher assay to absorb an overage is not a substitute for a fill calculation, and a granulate does not change the amount of NADH in a capsule. ## What to write into the specification - “Reduced nicotinamide adenine dinucleotide disodium salt (NADH), CAS 606-68-8, C21H27N7Na2O14P2, molecular weight 709.40.” - “Assay ≥95.0% by HPLC with UV detection at 340 nm; state as-is or anhydrous.” - “Loss on drying ≤8.0% by gravimetry; report the measured figure.” - “Identification by HPLC retention and UV spectrum, with bands at 259 and 340 nm.” - “Sodium about 6.5% on the anhydrous basis by ICP-OES, where the form is to be confirmed.” - “Particle size ≥95% through 80 mesh; heavy metals and microbiology as listed.” - “Presentation: 80 mesh powder, or granulated on request with its own mesh line.” - “Destination market and finished-product form written into the order.” We supply the reduced disodium salt. The oxidised form is a separate purchase with its own specification and certificate, and it should not replace NADH without written change control. ## When the other option is the wrong choice Granulate is a poor fit for a formula that needs a fine, fast-dispersing powder, or for a filling line not qualified for the coarser fraction. The 80 mesh powder is a poor fit when dust or hopper flow is the limiting problem. NAD+ does not fit a label, specification or market file that names the reduced form. The reverse holds as well. The two forms are not interchangeable at the balance, and a switch changes the CAS number, the assay wavelength and the label name at once. Catalog values sit on the NADH product page. The level-four comparison examines the redox difference, the COA page records the form at release, the NAD+ page covers the oxidised material, the identity page sets out the tests, and the quality page describes the release file. ### 02.1 NADH vs NAD+: the reduced and oxidised forms URL: https://nutrition.rainwoodbio.com/products/specialty/nadh/grades/nadh-vs-nad/ Reviewed: 2026-11-20 NADH is the reduced member of the NAD redox pair and NAD+ the oxidised one; the difference is two electrons and a proton on the nicotinamide ring. Buyers meet them as different specifications: CAS 606-68-8 against 53-84-9, a 340 nm assay against a 260 nm assay, and a solid that loses reduced content in air against one that hydrolyses in water. A label, a certificate and a formulation cannot swap one for the other. In one lineNADH and NAD+ are one redox step apart, and that step decides the CAS number, the wavelength the assay reads, the way each powder fails and the name on the label. ## The nicotinamide ring carries the change NAD+ presents a pyridinium cation on that ring; reduction converts it to a 1,4-dihydropyridine. Two electrons arrive with one proton, the hydride shift that dehydrogenases run in reverse. The rest of the coenzyme, the adenine, the two riboses and the pyrophosphate link, is common to both, which explains why the two powders look alike and behave unlike each other. Compare like with like. The free acids are C21H27N7O14P2 at 663.43 for NAD+ and C21H29N7O14P2 at 665.45 for NADH: two hydrogen atoms, 2.02 mass units. The catalog materials are not matched that way. NADH is sold here as the disodium salt, C21H27N7Na2O14P2 at 709.40, while NAD+ is the free acid. Setting the two catalog numbers side by side mixes a salt with an acid and adds 45.97 mass units, of which 43.96 come from replacing two protons with two sodium ions. The pair is not a ladder. NADH is not a stronger or purer NAD+, and NAD+ is not an earlier version of NADH. Each has its own certificate, assay and specification, and each is bought for the form it names. ## The two catalog materials side by side NADH disodium (reduced) and NAD+ free acid (oxidised) | Property | NADH (reduced) | NAD+ (oxidised) | CAS number | 606-68-8 | 53-84-9 | Redox state | Reduced | Oxidised | Nicotinamide ring | 1,4-Dihydropyridine | Pyridinium | Catalog form | Disodium salt, 709.40 | Free acid, 663.43 | Ultraviolet maxima | About 259 nm and 340 nm | About 259 nm; no 340 nm band | Assay channel | 340 nm | About 260 nm | Dominant solution reaction | Oxidation back to NAD+ | Hydrolysis | pH window | Acid-labile; handled alkaline | More stable mildly acidic | Ingredient name | Reduced nicotinamide adenine dinucleotide disodium salt | β-Nicotinamide adenine dinucleotide The table separates two materials that share a name stem, a biological role and most of their structure. It is not a conversion chart. ## Detection wavelength is the practical separator The reduced ring absorbs at 340 nm; the oxidised ring does not. A 340 nm HPLC method therefore reports NADH and is blind to NAD+. A 260 nm method sees the adenine ring in both forms, plus AMP, ADP and other nucleotides, so without chromatographic separation it reports a family rather than a compound. A certificate that gives only a 340 nm percentage has not bounded the oxidised fraction. Ask for the 260 nm related-substance chromatogram and the NAD+ limit alongside it. In the other direction, a 260 nm assay presented as an NADH figure overstates the reduced content whenever NAD+ is present. Activity is a third measurement. An enzymatic assay follows the 340 nm decrease as a dehydrogenase consumes NADH; that is a measure of coenzyme function, not of peak purity, and it sits beside the chromatogram rather than replacing it. ## Each form has its own decomposition route Oxygen takes NADH back to NAD+, a reaction that light, heat and trace metals speed up. The dry solid reacts at exposed surfaces, and a solution reacts throughout. NAD+ has no such return path without a reductant, but water attacks it hydrolytically, faster as temperature rises and as pH leaves the mildly acidic range. pH is where the two profiles cross. The NAD+ catalog gives a 1% solution at pH 2.0–4.0, where the oxidised form is comparatively comfortable; NADH is acid-labile and is normally handled at alkaline pH. A low-pH drink therefore favours the oxidised form, while a high-pH drink is no long-term home for either. Reformulating from one to the other means repeating the pH, hold-time and appearance work, not editing a number. Both solids are hygroscopic. The pack has to exclude water and light for either one, and a stability file written for one form says nothing about the other. ## Converting mass is not converting the ingredient The ingredient name has to identify the redox state and, for NADH, the salt as well. “Reduced nicotinamide adenine dinucleotide disodium salt” is not the same declaration as “β-nicotinamide adenine dinucleotide”, and “NAD” on its own is ambiguous. The declared quantity and the assay basis should use the same form and the same units as the specification. Ten milligrams of NADH disodium contains 9.38 mg of the free-acid moiety (10 × 665.45 ÷ 709.40); the remainder is the two sodium ions less the two protons they replace. On a pure free-acid comparison, 10 mg of NADH is 10.03 mg of NAD+ equivalent, because the reduced molecule carries two extra hydrogen atoms. Those factors describe mass, not interchangeability. Whether a market file covers the label is a separate question. A file written for one form is not automatically valid for the other, and the buyer's regulatory team has to confirm the route for the destination. No authorisation is asserted here for either form. ## Which form the project should buy Pick NADH when the label, specification and market file all name the reduced form; buy the disodium salt with a 340 nm assay, a loss on drying limit and a sodium check. Pick NAD+ when the oxidised form is named and the product is dry. An assay figure alone does not settle the choice. Switching to fit a supplier quotation, an old specification or a label translation is still a formulation change. It moves the CAS number, the detection wavelength, the stability risks and the regulatory citation together, so it needs a change control, a new certificate and a fresh label review. NADH is not NMN or nicotinamide riboside either; those are separate molecules with their own specifications. Catalog data is on the NADH product page, the oxidised material has its own NAD+ page, the separation is covered in the HPLC method note, and the release file is described on the quality page. ### 03 NADH stability: oxidation, water and the pack URL: https://nutrition.rainwoodbio.com/products/specialty/nadh/stability/ Reviewed: 2026-11-20 NADH has two ways to fail: the powder absorbs water, and the reduced ring is oxidised back to NAD+ wherever oxygen reaches it. Light, heat and trace metals speed the second route, and a solution is the most exposed format of all. The useful shelf life is therefore a property of the pack and the storage condition attached to it. In one lineNADH fails by water uptake and by oxidation, and a pack that excludes both is the only basis for a retest period. ## The solid: water first, then oxidation The certificate limit for loss on drying is ≤8.0%, and storage adds to it. NADH is hygroscopic: a pouch that has been opened and folded closed still exchanges air with the room, so the next loss-on-drying result is likely to be higher. Caking, lumps and slower flow follow, and an 80 mesh powder has plenty of surface for the change. Oxidation runs alongside. Oxygen at the particle surface converts NADH to NAD+, and the reaction is fastest where the powder is spread thin or left exposed. A 260 nm total-dinucleotide assay can miss this because it counts both forms; the 340 nm result is the one that falls. Keep light and heat out as well. Published handling data for the pure solid often call for −20 °C, a desiccant and protection from light; a commercial pack needs its own agreed condition, backed by data. Let a cold pack equilibrate before opening it, or condensation will form on the powder. ## The solution: oxygen, light and pH Dissolved NADH reacts with dissolved oxygen. Light, heat and trace metal ions increase the rate, and the matrix pH changes it; NADH is acid-labile, which is the opposite of the oxidised form's preference for mildly acidic solutions. A low-pH drink is a difficult home for the reduced coenzyme before any heat process is added. Hot fill and pasteurisation add heat, and often oxygen exposure. A stick pack keeps the powder dry until the consumer adds water, so it avoids the problem at the cost of a seal that has to stay intact. Where a liquid is unavoidable, deoxygenate, control pH, use an opaque bottle and measure the hold time in the finished matrix. Appearance is a poor guide. A pale yellow solution can already have lost reduced content, and a darker one may contain only a little oxidised material. Measure at 340 nm rather than judging by eye. ## What drives the loss Factors that move NADH during storage | Factor | What it does | Control | Oxygen | Converts NADH back to NAD+ | Low headspace; sealed pack; deoxygenated process | Water | Raises loss on drying; lowers the as-is assay | Foil pack; desiccant; reseal after opening | Light | Speeds oxidation and colour change | Opaque pack; dark store | Heat | Speeds oxidation and hydrolysis | Cool store; cool process | pH | NADH is acid-labile; pH changes the rates | Validate the matrix pH; buffer if needed | Trace metals | Catalyse the oxidation | Avoid iron and copper contact The factors combine. A warm, bright, humid store is worse than three separate effects added together, and an aerated acidic drink brings most of them into one bottle. The question is not whether NADH is stable, but how long it stays within specification in a named pack and condition. ## Designing the study Match the study to the pack and the matrix. A warehouse arm at 25 °C/60% RH, an intermediate arm at 30 °C/65% RH and an accelerated arm at 40 °C/75% RH cover the usual bulk-storage question. Add a light-exposure arm, because a dark chamber cannot expose a photolytic route. Test assay at 340 nm, related substances at 260 nm, loss on drying, appearance, sodium where the form is claimed and microbiology at every point. The 260 nm profile is the only one that sees NAD+ and the related nucleotides. The report should give individual results, name the pack, the lot family and the condition, and not reduce everything to a pass statement. Data from a different pack is not a substitute for the pack on order. ## How the finished formula changes the answer Capsules and tablets have low water activity, but the shell and the excipients can still pass moisture into the fill; test loss on drying and appearance at release and after storage. A stick pack lives or dies by its seal, so inspect the strip for pinholes as well as testing the powder. A beverage brings water, oxygen, heat, light and pH together. Bulk powder data is the starting point, not the answer. An overage is a formulation and label choice; it cannot compensate for a pack that admits oxygen. No finished format inherits the bulk pack's retest period. Headspace, opening history and the barrier in front of the powder all differ. ## How the shelf life is set There is no single shelf-life figure for NADH. The retest period belongs to a named pack, a named storage condition and a named test panel, and it should appear in the specification with the supporting data. A bare number is a claim. At the end of the period, re-test the retained sample at 340 nm and re-check loss on drying before extending use. Do not extend on assumption and do not apply a drum result to a pouch. The two packs differ in headspace, surface-to-volume ratio and how often they are opened. Standard packs are listed on the NADH product page; release tests are on the COA page; pack and lead time are on the MOQ page; the assay is described in the HPLC method note; and the release workflow is on the quality page. ### 04 NADH: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/specialty/nadh/moq/ Reviewed: 2026-11-20 NADH is quoted from a 1 kg foil pouch, with the 25 kg fiber drum reserved for production volumes. The standard pack is dispatched 1–7 days after order confirmation. A firm offer needs the reduced disodium salt named with CAS 606-68-8, the assay basis and its 340 nm wavelength, the pack and quantity, the destination and Incoterm, the document set, and the market where the powder will be sold. In one lineA kilogram is the smallest sealed unit that can carry its own lot code; the drum is a production pack, not a different material. ## Why the minimum is 1 kg The pouch is the unit of traceability. Its kilogram covers a bench trial, a retained sample and an identity check by an outside laboratory, and it moves as a parcel without a pallet. Filling and labelling happen under one lot code, so the certificate, the pack and the retained portion can be matched. Anything smaller is a split from a larger lot, carrying extra handling and a thinner link to the original pack. The drum answers a different problem. It cuts handling per kilogram but asks the buyer to hold an oxidation-sensitive powder for longer. Order against consumption: a drum opened repeatedly over months exposes the material to air each time, and the handling saving can be lost in re-testing. The pack decision is a storage decision as much as a commercial one. ## Packs and formats Standard NADH packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, samples, small runs | Foil barrier; close it again after use | Fiber drum | 25 kg | Production | Liner inside; lot code on both | Granulated powder | On request | Dust and flow control | New mesh line; quoted separately The standard material is milled to 80 mesh (≥95% passing). Granulation is a separate presentation with a new particle-size line; it is quoted as a change, not selected from a packing list. Tell the supplier before the quotation if the fill line needs a coarser or freer powder, because the extra step can extend the dispatch window. ## Lead time and dispatch Order confirmation starts a 1–7 day dispatch window for the standard pack. Picking, documentation and hand-over to the carrier sit inside that window; transport, customs and the customer's own release sit outside it. A granulated lot or a special pack is quoted with its own timing. Ask for the dispatch date in writing rather than relying on the range. The pouch moves as a parcel and the drum as a pallet, and the Incoterm fixes who books and pays for each leg. Send the lot documents with the material, not after it, so the receiving laboratory can release the pack without chasing paperwork. Prepare the store before delivery. The pack needs a dry, dark, cool position, and a drum needs room to keep the liner closed between withdrawals. ## What a quotation needs A comparable quotation answers six questions: which form (reduced disodium salt, CAS 606-68-8); which specification revision, with the assay basis and 340 nm wavelength; which quantity and pack; which destination and Incoterm; which documents (COA, specification, SDS and market statements); and which intended use and market. When one of the six is missing, the offers are not yet comparable. The market answer matters because the same lot can be acceptable in one destination and outside the file in another. The form answer matters because an offer for NAD+ is not an offer for NADH. Commercial terms are not published on this page; they belong on the quotation. ## The sample is a lot, not a demonstration The pouch doubles as the qualification sample. Run identity (HPLC retention and UV at 259 and 340 nm), assay, loss on drying, sodium and microbiology on it, then keep a retained portion from the same pack. Record the lot code on the sample, the certificate and the quotation; if the three do not match, the exercise has tested a different material from the one on order. A sub-kilogram bench request is a repack. It leaves the original lot, acquires a handling record of its own and should not be described as the catalog pouch. Ask for the split in writing and file its code with the trial data. Store the sample under the same conditions intended for production. A clear jar on a windowsill is not a fair proxy for a foil pouch in a dark store. ## Terms to settle before the first order Put the commercial and quality terms on one page before the first production order: Incoterm, pack, dispatch window, specification revision, one COA per lot, retained sample, retest period and the change-notification route. A quality agreement signed at this stage is easier than a dispute later. If a lot is disputed, the case rests on the retained sample and a joint re-test by the named method. Name the referee laboratory and the party who pays for it before the first order, not after a disagreement. A return argued from a photograph of the drum is hard to settle for either side. Catalog values are on the NADH product page; release tests on the COA page; the market file on the compliance page; the term itself in the MOQ glossary; and shipping documents on the logistics page. ### 05 The regulatory file for NADH disodium URL: https://nutrition.rainwoodbio.com/products/specialty/nadh/compliance/ Reviewed: 2026-11-20 NADH disodium is supplied to a catalog specification; permission to use it is a separate question that turns on the destination. In the EU, as of this review, the novel food catalogue classifies NAD+ and NADH as not novel in food supplements and does not extend that position to other foods, so a drink or a fortified food is not covered by that listing. In the US, the DSHEA route and, for a newer ingredient, an NDI notification apply. The buyer's regulatory team owns the route, the dose and the label. In one lineThe specification covers the powder; the market entry, the dose and the label are destination questions that the buyer's regulatory team confirms. ## The supplier-side file Before any route can be chosen, the supplier side has to be in order. That means a versioned specification, a lot COA, a TDS and an SDS, plus dated allergen, GMO, origin and residual-solvent statements and a change-control record. Undated scans collected in a folder do not make a file. The specification should identify the reduced disodium salt, CAS 606-68-8 and the assay basis; the certificate and the quotation should cite the same revision. If a statement is absent for the lot, surface it at quotation rather than at the port. ## European Union The EU file rests on five instruments: general food law (Regulation (EC) No 178/2002), food information and labelling (Regulation (EU) No 1169/2011), food supplements (Directive 2002/46/EC), contaminants (Regulation (EU) 2023/915) and, where the substance is not established, the novel food Regulation (EU) 2015/2283. The novel food catalogue is the first place to check for NADH. As of this review it lists NAD+ and NADH as not novel in food supplements, and it does not extend that position to other foods. A supplement is therefore the category to match; a beverage, a bar or a fortified food needs its own route. The catalogue and the consolidated texts can change, so verify both before relying on this paragraph. Any novel-food position is specific to a substance, a form, a use level and a food category. The buyer's team should record which entry it relies on and keep the evidence with the order. Framework references are collected in the EU regulatory notes. ## United States In the US, the frame is the Federal Food, Drug, and Cosmetic Act as amended by DSHEA. A dietary ingredient with a market history before 15 October 1994 can use the pre-DSHEA provision; a newer one normally needs an NDI notification under 21 CFR Part 190. Manufacturing and the Supplement Facts panel sit under 21 CFR Part 111 and 21 CFR 101.36. Nothing on this page asserts that an NADH notification exists, or that any notification covers this salt, this dose and this market. The buyer confirms the basis and keeps the evidence on file. ## United Kingdom The UK does not run a single file. As of this review, Great Britain keeps its own novel food register and guidance, while Northern Ireland follows the EU framework described above. Which one applies depends on the delivery address; the buyer's team should record the decision with the order so that the label and the entry cited can be checked later. ## Ingredient limits and the finished product The metal limits in the catalog are written for the ingredient. The finished product needs its own calculation: the lot result multiplied by the dose, set against the destination limit. Catalog limits and what the finished-product file shows | Parameter | Catalog limit | What the file confirms | Lead (Pb) | ≤3 mg/kg | Lot figure, method and the dose calculation | Arsenic (As) | ≤2 mg/kg | Lot figure and the destination limit | Cadmium (Cd) | ≤1 mg/kg | Lot figure and any category exception | Mercury (Hg) | ≤0.1 mg/kg | Lot figure and method | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | The plate count and the absence finding A micro result releases the lot; it does not make the powder sterile. Keep the retained sample so a contested result can be re-examined against the named method. ## Naming the ingredient and reviewing claims This page makes no disease-related claim. The label has to name the reduced form and its salt, and any structure/function wording needs substantiation, the DSHEA disclaimer where it applies, and a market check. Energy, fatigue or cellular wording is claim language; it is not a property of the certificate. Claim review runs beside the specification, not inside it. A certificate cannot authorise wording, and rewording a claim does not reopen the specification. The reviewer needs the finished dose, the form and the destination to hand. ## Documents for the NADH file - Versioned specification naming the reduced disodium salt and CAS 606-68-8. - Lot COA with the assay wavelength and basis, loss on drying, sodium where measured, metals and micro. - Current TDS and SDS. - Allergen, GMO and origin statements. - Residual-solvent statement for the route used. - Stability summary for the pack on order. - Change-control record covering source, process and pack. - Dated regulatory position for the destination. Every document should carry a date and a revision. Find the gaps before the order, not when the container is already booked. ## Checklist before the first order - Form, CAS number and specification revision are named. - The destination route has been confirmed in writing by the buyer's regulatory team. - The use level and the finished dose sit inside that route. - The COA carries the assay wavelength, the basis and the loss on drying. - TDS and SDS are current. - Allergen, GMO, origin and residual-solvent declarations carry dates. - The metal results are converted to the finished-product dose. - The label and claims have been reviewed for the destination rules. The NADH product page carries the catalog specification. The COA page explains the lot certificate, and the identity page covers the analytical evidence. The release file is described on the quality page, and the NAD+ page holds the oxidised form for comparison. ### 06 How we prove an NADH lot is the reduced disodium salt URL: https://nutrition.rainwoodbio.com/products/specialty/nadh/identity/ Reviewed: 2026-11-20 An NADH lot is the reduced disodium salt when four observations agree: the document names CAS 606-68-8 and the disodium salt; HPLC retention and the UV spectrum show the 259 nm adenine band and the 340 nm reduced-ring band; sodium by ICP-OES is close to the theoretical 6.48% on the anhydrous basis; and loss on drying closes the mass balance. No single assay figure can tell NADH apart from NAD+, the free acid or a diluted powder. In one lineIdentity is the agreement of four measurements: the 340 nm band says reduced, the sodium figure says disodium, and the water closes the balance. ## Four questions, four kinds of evidence A reviewer can audit identity by splitting it into separate questions, because each one needs its own evidence. An answer to the first question alone describes the paperwork, not the powder. Four questions behind an NADH identity claim | Layer | Question | Test | What it proves | Document | Does the paperwork name the form? | Name, CAS 606-68-8, formula, molecular weight | Paperwork only | Chromatography | Is the dinucleotide reduced? | HPLC retention and UV spectrum at 259 and 340 nm | The molecule and its oxidation state | Counter-ion | Is the counter-ion sodium? | Sodium by ICP-OES | The salt form | Mass balance | Do the numbers add up? | Assay, loss on drying, related substances | Consistency of the numbers ## The sodium ratio and the 340/260 ratio Two sodium ions sit on each NADH molecule, so the anhydrous salt should contain 2 × 22.99 ÷ 709.40 = 6.48% sodium by mass. A result close to that, with an assay in the high nineties, is consistent with the disodium salt. A low figure points to the free acid, a dilution or another salt; a high figure points to a different sodium salt or a buffer. Report sodium on the same basis as the assay. With 8.0% loss on drying on the as-is powder, the same 6.48% becomes about 5.96% of the powder as weighed (6.48 × 0.92). A sodium result compared without its water can look like a form failure when it is only a basis mismatch. The second ratio is spectrophotometric. NADH has two bands, the adenine band near 259 nm and the reduced-ring band at 340 nm; NAD+ has the 259 nm band and no 340 nm band. A 340/260 ratio well below the reference can mean oxidation, and a 340 nm assay on its own cannot see NAD+ because the oxidised form does not absorb there. Ask for the 260 nm related-substance profile beside the 340 nm assay. A ratio is not a purity measurement. An impurity that absorbs at 340 nm raises it, and dilution can leave it unchanged, so read it with the chromatogram, the sodium figure and the water. ## X-ray diffraction as a solid-state check X-ray diffraction asks about the solid: is the powder crystalline, and does the pattern match a reference? NADH is often freeze-dried, and the result can be partly or fully amorphous, so the pattern is a process fingerprint rather than a purity assay. It can distinguish a crystalline solid from an amorphous one and compare lots from two sources. Before accepting a match statement, ask for the reference pattern, the preparation and the detection limit. The method cannot measure sodium or water, and it cannot distinguish two amorphous solids. It is not a routine release test here, and “XRD conforms” without a pattern adds little. In a dispute, diffraction alongside sodium and HPLC/UV carries more weight than any one alone. It earns its place when the solid form is the question, because a drying change can alter the pattern without touching the assay. ## What adulteration looks like Common NADH substitutions and the signals | Adulterant | What it does | Signal | Test | NAD+ (oxidised) | Replaces reduced with oxidised material | 340 nm low; 260 nm peak; sodium low if the free acid | Dual-wavelength HPLC, sodium | NADH free acid | Replaces the disodium salt | Sodium below 6.48%; lower pH | ICP-OES, pH | Related nucleotides | AMP, ADP, NMN or nicotinamide added | Extra peaks at 260 nm; shifted assay | HPLC at 260 nm, mass spectrometry | Diluent | Lowers the amount of NADH | Low assay; mass balance off; sodium low | Assay, loss on drying, sodium | Water | Raises loss on drying | LOD high; as-is assay low; anhydrous normal | Gravimetry | Dye | Matches the pale yellow colour | Colour without the UV bands | UV spectrum Colour proves the least. White to pale yellow spans a wide range that a dye can imitate, while the 340 nm band, the sodium figure and the mass balance are harder to reproduce. A certificate limited to appearance and assay has not tested the substitution most likely to occur. ## Identity clauses for the specification - “Reduced nicotinamide adenine dinucleotide disodium salt (NADH), CAS 606-68-8, C21H27N7Na2O14P2, molecular weight 709.40.” - “Assay ≥95.0% by HPLC at 340 nm; state as-is or anhydrous.” - “Identification by HPLC retention and UV spectrum, with bands at 259 and 340 nm; report the spectrum.” - “Sodium about 6.48% on the anhydrous basis by ICP-OES, with an agreed tolerance.” - “Loss on drying ≤8.0%; report the measured figure.” - “Related substances at 260 nm; no unspecified peak above the agreed limit.” - “Particle size ≥95% through 80 mesh; heavy metals and microbiology as listed.” - “Confirm the form, the destination market and the pack before the order is placed.” ## Six questions for the supplier - Which salt form and CAS number appear on the certificate? - Can the chromatogram and the UV spectrum at 259 and 340 nm come with the assay? - What is the sodium result by ICP-OES, and is it reported on the anhydrous basis? - What is the loss on drying, and does the assay use the as-is or the anhydrous basis? - What does the 260 nm related-substance profile show, and what is the limit for NAD+? - If we disagree about a result, will you test the retained sample again with us? Those six answers together form an identity file; one assay number does not. The product hub carries the catalog specification; the NAD+ page holds the oxidised material; the COA page maps each result to its place on the lot certificate; the grades page compares the presentations; the level-four comparison covers the redox pair; the HPLC method note and the ICP-OES note explain the measurements; and the quality page describes the release file. ### 01 What the COA for oat protein actually contains URL: https://nutrition.rainwoodbio.com/products/protein-collagen/oat-protein/coa/ Reviewed: 2026-11-20 An oat protein COA is a report on a specific lot, not a restatement of the catalog range. It carries the nitrogen method and the 5.83 factor, the dry-matter basis, the fat, fibre, ash and moisture that fill out the powder, and the identity, metal, micro and mesh lines. The limits below are the catalog gates; the measured results belong in their own column on the lot certificate. In one lineThe protein figure is a calculation: the nitrogen, the oat factor and the dry basis have to be stated together before the percentage means anything. ## The certificate as a test report The useful test of a certificate is whether a stranger could audit a row. Three elements make that possible: the parameter, the method behind the value, and the release limit. A row that stops at “conforms” withholds the evidence and asks for trust instead. The identity line should distinguish oat protein from any other protein. A protein profile — an amino acid pattern by ion-exchange chromatography, or an electrophoretic band pattern — compared against an oat reference does that. The certificate should identify the reference and the method, not only the conclusion. Oat protein: identity, composition and release limits | Test | Method | Limit | Identification | Protein profile against an oat reference | Conforms | Protein, dry basis | Kjeldahl nitrogen × 5.83 | ≥70.0% | Fat | Solvent extraction | ≤8.0% | Fibre | Enzymatic-gravimetric | ≤5.0% | Ash | Gravimetric, ashed | ≤3.0% | Moisture | Loss on drying | ≤7.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh ## Dry basis, nitrogen and the oat factor Oat protein is quoted on a dry basis with nitrogen multiplied by 5.83. Nitrogen is measured on the sample as received and converted to dry matter. Twelve per cent nitrogen gives 69.96%, reported as 70.0%, and the same nitrogen at 6.25 gives 75.0%. With 7.0% moisture, that dry-basis 70.0% is 65.1% in the powder as weighed. Demand the factor, the moisture and the basis together. A percentage on its own cannot be recalculated, and a label calculated at 6.25 will disagree with a certificate calculated at 5.83 even when both describe the same drum. Kjeldahl and Dumas are both nitrogen methods; which one was used is part of the method line. The rest of the powder is not protein. Fat, fibre, ash and water make up the balance, and two 70% concentrates from different oat streams can carry very different amounts of each. The protein number is the headline, not the whole specification. ## Release limit versus batch result On a lot certificate, each limit needs a measured value next to it. A result column that repeats the specification has measured nothing, and a single “pass” cannot be audited. The table sets out what the result column should show. The result column on a lot certificate | Parameter | Limit | Expected result | Protein | ≥70.0% dry basis, N × 5.83 | The measured percentage, with the factor and the moisture | Fat | ≤8.0% | A measured percentage | Fibre | ≤5.0% | A measured percentage | Moisture | ≤7.0% | A measured percentage | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot Microbiology needs a count plus an absence statement. Metals need one figure per element; a total hides cadmium, the element that matters most in an oat-derived powder. Where a result sits close to the gate, the method and its detection limit should appear beside it. ## What moves between batches Four variables explain most lot-to-lot movement: the oat source, how much starch and fibre were removed, the heat treatment and the milling. Protein, fat and fibre follow the source and the separation; moisture and mesh follow drying and milling. A different oat variety can move the fibre line without any change in the plant. Colour should not decide a rejection by itself. The window runs from off-white to light tan, and heat treatment or a finer grind can darken the powder within it. A colour shift is a reason to ask about the process, not proof of a substitution. Read the trend across lots rather than one certificate: protein near the 70.0% gate, fat or fibre climbing, moisture close to 7.0%. Keep the lot code consistent from certificate to pouch, drum and retain. ## When to order an outside test Outside testing is worth ordering for a new source, a regulated destination, a gluten-free or protein claim, or a disputed result. A focused panel beats a full repeat: nitrogen by Kjeldahl or Dumas, an amino acid profile, an R5 gluten ELISA, light microscopy for starch and fibre, ICP-MS for the metals, and a micro count. Every “not detected” needs a detection limit. For gluten, a method that cannot see below 10 mg/kg leaves little margin under a 20 mg/kg claim. For cadmium, the quantification limit should sit well under the catalog gate. Keep the chain short. Testing should use the retain, and the report should name the lot. In a dispute, give the referee the retain, the supplier’s COA and the specification, and ask for tests that separate oat protein from another protein or a dilution, not another nitrogen result. ## Comparing two suppliers Six lines carry the comparison: protein with factor and basis; fat, fibre and ash; moisture; gluten and allergen statement; metals and microbiology; pack and lot code. Two quotations that both say 70% but differ on fibre or factor describe different powders. Then look at the process record: who made the lot, which oat stream, whether the flour was heat-treated, and which mill and sieve were used. The catalog range sits on the oat protein page. The identity page shows how oat is separated from another protein; the compliance page sets out the gluten and allergen position; the methods library covers the protein tests; the quality page follows a lot from release to dispatch. The whey protein concentrate page is the animal-protein reference. ### 02 Concentrate, isolate or instantized: choosing an oat protein grade URL: https://nutrition.rainwoodbio.com/products/protein-collagen/oat-protein/grades/ Reviewed: 2026-11-20 Oat protein is sold as a concentrate around 70% protein, as an isolate above 80%, and as an instantized or granulated version of either. The grade is the protein level plus the fibre, fat and physical form, not the percentage alone. The catalog grade here is a 70% concentrate milled to 80 mesh, with an instantized powder available on request; an isolate or a hydrolysate is a separate purchase. In one lineThe grade is the protein level plus the fibre, fat and physical form, not the percentage printed at the top of the quotation. ## Why oat protein comes in several grades Oat flour carries roughly 10–15% protein; the rest is starch, fibre and fat. Making a protein ingredient means removing starch and part of the fibre, and how far that removal goes sets the protein level and the fibre and fat that remain. A concentrate stops earlier and keeps more fibre and fat. An isolate removes more and reaches 80% or higher with less of both. The physical form is a second decision. Instantizing or agglomerating changes how the powder wets and flows without changing the protein, fat or fibre lines. Organic certification is a third decision about the chain, not the chemistry: the same powder can come from an organic or a conventional oat stream, and the certificate scope is what separates them. A purchase order that says “oat protein 70%” leaves the fibre, fat and physical form open. Those are the lines that decide whether the powder works in a bar, a stick pack or a capsule, and they belong in the specification before the first quotation is compared. ## Grade options Oat protein grade options compared | Grade | Protein range | What comes with it | Where it fits | Check | Concentrate | 50–70% | Starch, fibre, some fat | Bars, blends, bakery | Fibre and fat load | Isolate | 80–90% | Little starch; lower fibre | High-protein powders | Factor and basis | Instantized | Same as base | Agglomerated particles | Stick packs, drink mixes | Wetting, not solubility | Organic | Same as base | Certified chain | Organic labels | Certificate scope | Hydrolysate | 80%+, peptide fraction declared | Peptides, free amino acids | Solubility-critical liquids | A different product The table describes the market grades. The grade in this catalog is the concentrate at ≥70.0% protein, fat ≤8.0% and fibre ≤5.0%. An instantized version of the same powder is available on request; the isolate and the hydrolysate are different specifications and different purchases. A hydrolysate is a different product rather than a cleaner isolate; it has a peptide specification, its own taste and its own release tests. ## Source, colour and powder behaviour Oat protein is off-white to light tan and free-flowing, with ≥95% through 80 mesh, but it is not a clear-solution protein. In water it disperses to an opaque, slightly gritty suspension that settles; that is the fibre and the globular protein, not a defect. A drink needs homogenisation, a stabiliser or an instantized grade, and even then it will not be clear. Flavour is another physical line. Oat protein carries a mild cereal, slightly bitter note that whey does not, and the note strengthens with the fibre and fat that remain in a concentrate. Heat treatment of the flour can reduce lipase activity and slow rancidity, but it also darkens the colour and changes the flavour. The process description should say whether the flour was heat-treated. Instantizing improves wetting and dispersion, not solubility. The protein, fat, fibre and moisture limits stay the same, while the particle-size result and the bulk density change, so an instantized grade needs its own sieve line and its own specification. A coarser granule flows better and dusts less; a finer powder mixes faster but cakes more readily. ## Powder weight and label arithmetic The arithmetic starts with the protein figure. At 70% protein, 25 g of powder carries 17.5 g of protein, and 20 g of protein needs 28.6 g of powder. At 80% isolate, 25 g carries 20 g. The difference is about 3.6 g of powder per 20 g of protein, which is a fill-weight and label question before it is a nutrition question. At 70% protein, a 500 mg capsule carries about 0.35 g, so 20 g of protein needs about 57 capsules. Powders, bars and stick packs are the practical formats; capsules cannot deliver a meaningful protein dose. The other lines travel with the protein. At 28.6 g of powder, fat at ≤8.0% adds up to 2.3 g and fibre at ≤5.0% adds up to 1.4 g per serving. Those figures belong in the nutrition declaration and in the bar’s texture calculation, and they are the reason a 70% concentrate is not simply a weaker 80% isolate. The factor moves the declared number. A lot at 12.0% nitrogen is 70.0% protein by 5.83 and 75.0% by 6.25. If the certificate uses the oat factor and the label uses the general factor, the panel will overstate the protein by about 7%. Reconcile the two on nitrogen before the label goes to print. ## What to write into the specification - “Oat protein concentrate, Avena sativa, with the source and the grade named.” - “Protein ≥70.0% by Kjeldahl, nitrogen × 5.83, on a dry basis; state the factor and the moisture on the certificate.” - “Fat ≤8.0%; fibre ≤5.0%; ash ≤3.0%; moisture ≤7.0%.” - “Appearance off-white to light tan; particle size ≥95% through 80 mesh.” - “Identification by protein profile; amino acid profile on request.” - “Gluten statement and test result where a gluten-free claim is made.” - “Heavy metals and microbiology as listed; lot code on the pouch, the drum and the certificate.” ## When a concentrate is the wrong choice An isolate is the right grade when the formula needs more than 80% protein or a lower fibre load. A concentrate is the wrong grade when the label claims a high-protein serving from a small scoop, or when the fibre and fat interfere with the texture. An instantized grade is not a substitute for an isolate, because it changes the powder behaviour, not the protein level. Oat protein is also the wrong choice when the label needs a complete protein from a single source: lysine is limiting, and the profile has to be completed elsewhere or the claim removed. It is not automatically gluten-free either; a gluten-free claim needs a test and a shared-line record, whatever the grade. The catalog range is on the oat protein page. The COA page explains the factor; the compliance page covers gluten and allergens; the whey protein concentrate page is the animal-protein alternative; the methods library holds the protein methods; the quality page describes release. ### 02.1 Oat protein vs whey protein: amino acids, allergens and the label URL: https://nutrition.rainwoodbio.com/products/protein-collagen/oat-protein/grades/oat-protein-vs-whey-protein/ Reviewed: 2026-11-20 A protein powder can come from oat or from milk, and the two are not interchangeable. Oat is a plant protein with fibre and fat, lysine is limiting, and it carries no milk allergen; whey is a complete milk protein with more leucine, no declared fibre, residual lactose and a mandatory milk allergen statement. The label has to name the source and match the analysis. In one lineOat protein is a fibre-bearing plant protein with lysine as its limiting amino acid; whey is a complete milk protein with more leucine and a milk allergen, so the label changes with the source. ## The two powders side by side The headline protein figure is the first difference, and it is not the most important one. The two powders differ in essential amino acids, fibre, fat, lactose and allergen position, and those lines decide what the label can say. Oat protein concentrate against whey protein concentrate 80 | Measure | Oat protein concentrate | Whey protein concentrate 80 | Protein in the powder, dry basis | ≥70.0% | ≥80.0% | Essential amino acids, per 100 g protein | About 36 g | About 52 g | Leucine, per 100 g protein | About 7–8 g | About 10–11 g | Lysine, per 100 g protein | About 4.2 g | About 10.6 g | Fat | ≤8.0% | ≤6.0% | Fibre | ≤5.0% | Not declared | Lactose | None declared | ≤5.0% | Allergen position | Oats; on the EU gluten-cereal list | Milk The amino acid values are published profile ranges, not batch results, and they move with the oat variety, the whey source and the process. ## Two protein numbers, two calculations Seventy per cent and eighty per cent are different powders before any amino acid is counted. At 25 g, the oat concentrate carries 17.5 g of protein and the whey concentrate carries 20 g. To deliver 20 g of protein, use 28.6 g of the oat powder or 25 g of the whey powder. The oat powder at that weight also brings up to 2.3 g of fat and 1.4 g of fibre; the whey brings up to 1.5 g of fat and 1.25 g of lactose. The factors differ as well. Oat protein is calculated with 5.83 and whey with 6.38, and the general 6.25 is used on many labels. The same nitrogen therefore reads as a different protein percentage on each certificate. Put the factor and the basis on the specification, and reconcile the label and the certificate on nitrogen rather than on the finished percentage. The label arithmetic follows the powder, not the ingredient name. A 30 g scoop of the oat concentrate is about 21 g of protein, and the same scoop of the whey concentrate is 24 g. ## Amino acids: the gap is lysine and leucine Whey is a complete protein and scores 1.0 on the PDCAAS scale. Oat protein scores lower, and lysine is the first limiting amino acid: about 4.2 g per 100 g of protein against about 10.6 g for whey. Leucine shows the same direction, about 7–8 g against about 10–11 g, and the essential amino acid total is about 36 g against about 52 g. Oat is not a poor ingredient because of that gap. It is higher in arginine and glutamic acid, it brings fibre, and it blends well with a protein that is rich in lysine. Oat and whey are complementary, and so are oat and pea or rice. A blend can reach a complete pattern that neither component reaches alone, but the blend is a two-ingredient formula and the label has to say so. “Complete protein” is a profile statement, not a marketing word. A single-source oat protein does not support it unless the profile has been supplemented, and a blend that hits the pattern should show the arithmetic rather than the phrase. ## Allergens: milk against oats In the EU, milk is on Annex II of Regulation (EU) No 1169/2011, and so are oats, as one of the cereals containing gluten. An oat protein therefore needs an allergen declaration even when the lot tests gluten-free. The gluten-free claim is a separate statement: the oats must have been specially produced to avoid contamination, and the food must meet the 20 mg/kg threshold in Regulation (EU) No 828/2014. Whey needs a milk declaration; the residual lactose is a label and tolerance question, not an allergen. In the US, milk is a major food allergen under FALCPA and a whey product carries “Contains milk”. Oat is not on the major-allergen list, and oat is not wheat, so an oat protein carries no major-allergen statement. Wheat cross-contact is still a control, and a “gluten-free” claim has to meet 21 CFR 101.91 and be supported by a shared-line record. Shared lines matter in both directions. A whey line can cross-contact an oat line with milk, and an oat line can cross-contact a whey line with oats. The allergen statement should match the line record, not only the recipe, and “dairy-free” is not a defined term in EU law; the milk statement is what carries the legal weight. ## What the label has to say The ingredient list names the source: “oat protein concentrate” or “whey protein concentrate”. The protein quantity is declared per serving, with the factor and the basis behind it. The allergen statement follows the source, and a gluten-free claim on an oat product needs the test and the special-processing condition. Protein claims have thresholds in both markets. “High protein” is 20% of energy in the EU and 20% of the Daily Value in the US; “source of protein” is 12% of energy in the EU and “good source” 10% of the DV in the US. The numbers depend on the whole recipe, not on the ingredient alone, and a fibre-bearing oat powder changes the energy calculation. There is no legal definition of “plant-based” or “vegan”; the words describe a recipe, not an allergen status or a protein quality. If whey is added to oat protein to lift the leucine, the pack cannot be sold as oat protein alone, even when the total protein is correct. No disease claim is open in either market, and this site makes none. ## When to choose which Choose oat protein for a dairy-free or plant-based label, a bar or a powder where fibre and a mild cereal note are acceptable, and a formula that does not need a clear solution. Choose whey for a high-protein claim at a small serving, a neutral-tasting drink, and a leucine-dense profile. A blend is the answer when the label needs a complete profile and the recipe can take both. A switch is a specification change: the protein factor, the allergen statement, the fibre and fat lines and the label arithmetic all move. At the weigh-up, neither is a drop-in for the other. The catalog ranges are on the oat protein and whey protein concentrate pages; the grades page compares the oat forms; the compliance page covers gluten and allergens; the nitrogen-factor arithmetic is in the methods library; the quality page explains release. ### 03 Oat protein is hygroscopic and fat-bearing; the pack decides the shelf life URL: https://nutrition.rainwoodbio.com/products/protein-collagen/oat-protein/stability/ Reviewed: 2026-11-20 Oat protein ages through water, fat and heat, not through a loss of protein. A sealed pack keeps it for the retest period on the specification; an opened pouch, a warm store or a wet mix changes the powder faster than the protein figure suggests. The shelf life belongs to the pack and the storage condition. In one lineThe protein survives storage; moisture, fat oxidation and heat are what change an oat protein powder, so the pack and the storage condition set the shelf life. ## The powder: water, fat and colour The moisture limit is 7.0% at release, not a licence to store the powder damp. Oat protein takes up water after the pack is opened; the powder cakes, the as-is protein falls as water adds mass, and flow suffers. Fat, up to 8.0%, is the second exposure: oat oil contains unsaturated fatty acids, and residual lipase or lipoxygenase can raise the peroxide value and give the powder a stale odour. Colour can move from off-white to tan with heat and time, and a reducing sugar in a blend can brown the powder through Maillard chemistry. The protein result may stay in specification while the powder fails on odour or colour. Keep the closed pack below 25 °C, off the floor, and bring a cold pack to room temperature before opening so condensation does not form on the powder. The pouch and the drum have different headspace; both depend on a sound seal or liner. ## The dispersion is the less stable format Oat protein does not dissolve. In water it makes an opaque suspension that settles, turns gritty at high load and thickens or gels when heated. A ready-to-drink line adds heat and hold time; a stick pack skips both because water is added at the point of use. Once water is added, the dispersion can support microbial growth. A liquid needs a validated hold, a preservative system or a thermal step, and none of those can be borrowed from the bulk powder data. The matrix, the process and the pack each change the rate. pH is a secondary variable. It moves viscosity and flavour more than it moves the protein, but a high-load neutral dispersion can foam during mixing. Defoaming and homogenisation are process choices, not certificate lines. ## What drives the change Storage factors for oat protein powder | Factor | Effect | Control | Water | Caking; higher as-is mass; lower as-is protein | Sealed barrier; dry store | Oxygen | Fat oxidation; stale odour; peroxide rise | Low headspace; sealed pack | Heat | Faster browning and oxidation | Cool store; cool process | Light | Surface colour loss and oxidation | Opaque pack; dark store | Fat level | More substrate for oxidation | Cap the fat; test peroxide | Fines and seal | Fines cake; a weak seal leaks | Instantized grade; seal check These factors combine. A warm, bright, humid store is worse than any one of them alone, and an opened pouch in a kitchen is the common example. The question is not whether the material is stable in general, but which pack, at which condition and for how long. ## Protocol for the powder Write down the pack, the condition, the time points and the tests. Use 25 °C/60% RH for long-term, 30 °C/65% RH for intermediate and 40 °C/75% RH for accelerated, and add a light-exposure arm. Test protein with factor and basis, moisture, fat and peroxide, colour, dispersibility, micro and sensory at each point. Show the individual results and the pack identity, not a single conclusion. Ask for the pack you will buy: the 1 kg pouch and the 25 kg drum differ in surface-to-volume ratio, headspace and opening history, so one data set does not cover the other. ## The finished formula changes the answer A bar is the hardest format. The syrup and the protein exchange water after the bar is made, free water rises, and Maillard chemistry darkens and hardens the bar. The fibre and fat in a 70% concentrate change the texture, sometimes softening and sometimes drying it. A drink is a suspension. It needs a stabiliser or homogenisation, a heat step that does not gel the protein, and a flavour that covers the cereal note. A stick pack is simpler, but the seal is the weak point: even one pinhole admits moisture, so the finished strip is checked as well as the powder. A capsule fill is dry, but the shell and the excipients can still move water into the fill. None of these formats inherits the bulk shelf life, and an overage does not repair a pack that leaks. ## Where the shelf life comes from No single shelf-life figure is attached to oat protein, because the pack and the storage condition decide it. Data for that pack is what supports the retest period printed on the specification; without the pack, the condition and the test panel, a number is only a claim. Re-assay the retain before extending use beyond the retest period. Never extend by assumption, and never copy a bulk figure onto a repack. The oat protein page lists the packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the whey protein concentrate page is the comparison; the methods library covers the protein and fat methods; the quality page describes the release workflow. ### 04 Oat protein: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/protein-collagen/oat-protein/moq/ Reviewed: 2026-11-20 The MOQ for oat protein is 1 kg, packed as a foil pouch from a released lot and sent with that lot’s COA; production orders normally use the 25 kg fiber drum. Standard lead time is 1–7 days. To quote accurately, we need the grade, quantity and pack, destination and Incoterm, the document set and the intended use. In one lineOne kilogram from a released lot is the qualification unit; the 25 kg drum is the production pack and the quotation is built from grade, quantity and destination. ## Why the minimum is 1 kg The minimum is not a marketing threshold. It is the smallest pack that can be sampled, tried and retained while staying tied to one lot code. One kilogram covers a bench trial, a retain and a check by an outside laboratory, and it is large enough to be drawn without splitting another pack. Below that, the material becomes a repack and the lot link weakens. The 25 kg drum is the production pack. It cuts handling per kilogram but ties up inventory and storage time, and it only makes sense once the trial has passed. The choice between pouch and drum is a trial-size and scheduling decision, not a volume incentive. ## Packs and formats Oat protein pack options | Pack | Net weight | Where it fits | Handling note | Foil pouch | 1 kg | Trial, sample, small batch | Reseal or decant after opening | Fiber drum | 25 kg | Production | Inner liner; write the opening date | Instantized powder | 1 kg or 25 kg | Stick packs, drink mixes | Same chemistry; new mesh line | Split pack | On request | Trial under 1 kg | New handling record; weaker lot link The pouch is the moisture and light barrier, and it is only a barrier while it is closed. Once opened, the remainder needs an airtight container or a quick use. The drum depends on its inner liner; the liner, not the fibreboard, keeps water out. An instantized grade travels in the same outer packs but needs a separate particle-size result. ## Lead time and dispatch A standard pack leaves 1–7 days after order confirmation. The window covers picking, documents and handover to the carrier; transit, customs and the customer’s release are outside it. A different mesh, an instantized batch or a split pack adds time, and the quotation should show the extra time rather than leave it to a later message. Ask for the dispatch date, not only the range. A pouch normally travels as a parcel; a drum goes on a pallet; the Incoterm assigns the freight booking and the customs entry. The COA and the other lot papers should travel with the goods, not follow them. ## What a quotation needs A comparable quotation answers six questions: - Grade. Oat protein concentrate 70%, standard or instantized, with the oat source named. - Specification. Protein factor and basis, fat, fibre, moisture, mesh, metals and micro. - Quantity and pack. 1 kg pouch, 25 kg drum, or a split agreed in writing. - Destination and Incoterm. Country, port or address, and the trade term. - Documents. COA, TDS, SDS, and the allergen and gluten statements the destination needs. - Use and market. Food, supplement or another use, and the country of sale. A quotation that omits the grade or the market cannot be lined up against another. A drum that fits one destination may fall outside another country’s file, so the documents belong in the offer. Commercial terms are not published on this page; they appear in the quotation. ## A sample needs a traceable lot The 1 kg pack is the pack we qualify with. Test protein with its factor, fat, fibre, moisture, mesh, gluten and micro, keep a retain from the same pack, and check that the lot code on the sample, the COA and the quotation agree. If it cannot be traced back to a lot, it is only a demonstration. If the bench needs less than a kilogram, request a split in writing. A split gets a new handling record and a weaker lot link; it is acceptable for a trial but should not be presented as the catalog pouch. A trial lot and a production lot can differ even when both pass the same specification. ## Terms to settle before the first order Agree the commercial and quality terms in one document before the first production order: Incoterm, pack, dispatch window, specification revision, COA per lot, retain, retest period and the change-control route. These are easier to settle before a problem than after it. A lot that misses the agreed specification is handled on the retain, by a joint re-test against the named method; a photograph of the drum is not evidence. Name the referee laboratory and the party that pays for it in advance. Appearance alone is a weak basis for a return. The catalog range is on the oat protein page; the COA page sets out the release tests; the grades page compares the powder forms; the compliance page covers the market file; the whey protein concentrate page is the animal-protein comparison; the methods library defines the protein methods; the quality page covers the release file. ### 05 Where oat protein is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/protein-collagen/oat-protein/compliance/ Reviewed: 2026-11-20 Oat protein is an ordinary food ingredient in the EU, the US and the UK as of this review. The file still has to settle four oat-specific points: the EU listing of oats with the gluten cereals, the conditions for a gluten-free claim, cadmium against the finished dose, and the nitrogen factor behind the protein figure. The buyer’s regulatory team confirms the final route. In one lineOat protein is an ordinary food ingredient in the main markets, but oats sit on the EU gluten-cereal list and every gluten-free or protein claim needs its own evidence. ## Who owns which question The file answers three questions: is the material permitted where it is sold; is the label accurate about source, protein and allergens; and do the contaminants hold at the finished dose? The importer owns the first, the recipe owner the second, the dose calculation the third, and the brand the claims. Oat adds a label-specific point. The grain belongs to the cereal group that EU law classifies as containing gluten, and that is a declaration duty even when the lot is gluten-free. ## European Union and the United Kingdom Oat has a long food history in Europe. The grain and a protein concentrate made from it are not novel foods as of this review; a new extraction route or a new fraction should be checked against the current novel-food catalogue. The supplement route is Directive 2002/46/EC. The label is set by Regulation (EU) No 1169/2011. Annex II includes oats in the cereals containing gluten, so the ingredient must be named and emphasised. A gluten-free claim has its own conditions: the oats must be specially produced to avoid contamination, and the food must be at or below 20 mg/kg under Regulation (EU) No 828/2014. The allergen declaration survives the claim. Regulation (EU) 2023/915 supplies the contaminant limits. Cadmium is the element to follow in an oat ingredient because the plant takes it up, and the cereal entry can be stricter than the supplement reference; match the entry to the product form and the dose. For an organic claim, Regulation (EU) 2018/848 applies and the certificate must name the product. In Great Britain the applicable law is retained: the Food Information Regulations 2014, the Food Supplements (England) Regulations 2003 and their devolved equivalents, and domestic contaminant limits. Northern Ireland applies the EU rules, including the gluten-free conditions. ## The United States The US route depends on whether the material is sold as food or as a supplement, and the paperwork changes with it. A supplement brings the facility under 21 CFR 111 and the panel under 21 CFR 101.36; the supplier should state the basis for sale and the buyer should confirm it reaches the finished product. The major allergens named by FALCPA are milk, egg, fish, crustacean shellfish, tree nuts, peanuts, wheat, soybeans and sesame. Oats are absent, and oats are not wheat, so an oat protein has no major-allergen statement in the US. Wheat cross-contact remains a control, and a gluten-free claim has to meet 21 CFR 101.91 and be supported by a shared-line record. Protein on the panel is nitrogen times a factor. The general factor is 6.25 and the oat factor is 5.83. Reconcile the two before the panel is printed, and write the factor into the specification. ## Limits and the oat factor The catalog panel is a release gate written to a supplement reference. The destination entry and the daily dose can be tighter, and cadmium is the element that makes the difference for an oat ingredient. Elements to check, and why oats change the answer | Element | Catalog gate | Why oats differ | What the file needs | Lead (Pb) | ≤3 mg/kg | General soil and handling contaminant | Lot result, method and dose calculation | Arsenic (As) | ≤2 mg/kg | Lower than rice, but still report it | Lot result and method | Cadmium (Cd) | ≤1 mg/kg | Plant uptake; the cereal entry can be tighter | Lot result and the entry that applies | Mercury (Hg) | ≤0.1 mg/kg | General contaminant | Lot result and method These are release gates, not targets. The catalog limits are written to a supplement reference; the destination entry and the daily dose can be tighter. Cadmium is the one to recalculate on every oat lot, because a drum result that passes at 1 mg/kg may still be too high in a 30 g serving. Set an internal limit from the dose rather than from the catalog. ## Claims and label wording Protein claims sit in the nutrient-content category. In the EU, a “source of protein” claim needs 12% of energy from protein, and “high protein” needs 20%, measured as sold. The US thresholds are 10–19% of the Daily Value for “good source” and 20% or more for “high” or “excellent source”, against a 50 g Daily Value. “Gluten-free” is capped at 20 mg/kg in both markets, and the EU adds the special-processing condition for oats. There is no legal definition of “plant-based” or “vegan” in either market; the words describe a recipe. “Complete protein” is not a safe description of oat protein on its own, because lysine is limiting. No disease claim is available in either market, and this site makes none. ## The lot document pack - COA with protein, factor and basis, fat, fibre, ash, moisture, mesh and the metal panel. - TDS naming the grade, oat source, nitrogen factor and heat treatment. - SDS, 16 sections. - Allergen statement covering oats and any shared wheat, barley or rye line. - Gluten result if the label claims gluten-free. - Non-GMO statement and origin record. - Organic certificate with the product and operator in scope, if claimed. - Cadmium and lead results, plus the micro count and absence statement. ## Checklist before the first order - Is the grade and oat source named, and does the label use the certificate’s factor and basis? - Is oats declared as a cereal containing gluten in the EU, with the shared-line position documented? - If gluten-free is claimed, is the oat stream specially processed and the lot under 20 mg/kg? - Is cadmium inside the finished-dose calculation, not only inside the catalog gate? - Is every claim a nutrient-content claim, and is “complete protein” avoided or supported? - Is the document pack complete for the destination, including organic if claimed? Start at the oat protein page for the catalog range. The COA and identity pages show how a lot is released and checked; the whey protein concentrate page compares the animal protein; the methods library explains the tests; the quality page follows the release file. ### 06 How we prove an oat protein lot is oat, not a blend URL: https://nutrition.rainwoodbio.com/products/protein-collagen/oat-protein/identity/ Reviewed: 2026-11-20 An oat protein lot stands on four measurements that agree: nitrogen with its factor and basis, an amino acid pattern that matches oat, a fibre and ash balance that fits the grade, and a gluten result that shows cross-contact is controlled. A protein percentage by itself can be produced by a blend or a dilution, so it cannot be the whole proof. In one lineIdentity is the nitrogen, the oat amino acid pattern and the fibre fraction agreeing on the same lot, not a single protein percentage. ## Four layers of evidence The name on the certificate is a claim; the measurements are the evidence. Each layer below answers a separate question, and a supplier who answers only the nitrogen line has told us how much protein is claimed, not what the protein is. Four layers of oat protein identity | Layer | Question | Method | What it shows | Nitrogen | How much protein is claimed? | Kjeldahl or Dumas, with factor and basis | The quantity, not the source | Amino acids | Is the pattern oat? | Ion-exchange chromatography | The source family | Fibre and ash | Does the grade fit? | Enzymatic-gravimetric fibre, ash, microscopy | The grade and the absence of a dilution | Gluten | Is cross-contact controlled? | R5 ELISA; PCR for wheat, barley and rye | Line control, not the protein source Traceability is the fifth layer, behind the other four: the lot code, the oat stream, the mill and the certificate should point to the same pack. A result without a lot has no subject. ## The ratios that tie nitrogen to protein Oats use a nitrogen factor of 5.83. Twelve per cent nitrogen is 70.0% protein on that factor and 75.0% on the general 6.25. The factor is a convention and belongs on the specification, because changing it changes the declared protein without changing the powder. The amino acid pattern is the second ratio. Oat protein is high in glutamic acid and arginine and low in lysine next to whey; published figures are near 4 g lysine and 7–8 g leucine per 100 g protein. Rice, pea and soy have different patterns, and a blend sits between two of them. The third ratio is fibre and ash against protein. A 70% concentrate with 5% fibre and 3% ash leaves little room for starch; a lot at 70% with 10% fibre and 8% ash is a different grade or a diluted powder. The balance is free to check and catches the simplest substitution. ## What X-ray diffraction can and cannot prove XRD cannot identify a protein. Oat protein is amorphous, so the pattern is a broad halo, and a clean diffractogram does not prove the source. XRD can detect crystalline material that should not be there: added lactose, crystalline glycine or taurine, mineral salts, or a crystalline starch fraction. Before accepting a match, request the reference pattern and its detection limit. A one-line “XRD conforms” adds little. Use XRD with the amino acid pattern and the fibre figure, not instead of them. ## Substitutions and their signals Oat protein substitutions and the signals they leave | Substitution | What it does | Signal | Test | Maltodextrin or starch | Lowers protein and raises carbohydrate | Protein low; fibre or ash shift; crystalline starch on XRD | Mass balance, microscopy, XRD | Rice, pea or soy protein | Lifts protein with a foreign pattern | Amino acid profile shifts | Amino acid profile, electrophoresis | Wheat gluten | Adds protein and gluten | Positive gluten result; profile shift | R5 ELISA, PCR, amino acid profile | Free amino acids | Raises nitrogen without intact protein | One amino acid dominates | Amino acid profile, XRD | Melamine or urea | Adds nitrogen without protein | Protein high, profile does not follow | Nitrogen by two methods, HPLC or LC-MS | Wrong factor | Reports more protein from the same nitrogen | Factor unstated; label and certificate disagree | Recalculate from nitrogen The easiest number to lift is nitrogen. Melamine and urea are nitrogen-rich and add no oat protein, and a Kjeldahl result on its own cannot tell the difference. The amino acid pattern can, because the added nitrogen does not bring the oat profile. Wheat gluten also lifts nitrogen and is caught by an R5 ELISA or a gluten result; rice, pea or soy protein shifts the pattern without necessarily breaking the protein figure. ## How to write the identity into the specification - “Oat protein concentrate, Avena sativa, with the source and grade named.” - “Protein ≥70.0% by Kjeldahl, nitrogen × 5.83, dry basis; print the factor and the moisture.” - “Identification by protein profile; amino acid profile on request.” - “Fat ≤8.0%; fibre ≤5.0%; ash ≤3.0%; moisture ≤7.0%.” - “Gluten statement and result; shared-line declaration for wheat, barley and rye.” - “No added protein, amino acid, starch or maltodextrin.” - “Particle size ≥95% through 80 mesh; metals and micro as listed.” ## Five questions to put in writing - Which oat stream and mill produced the lot, and was the flour heat-treated? - Which nitrogen factor and basis are on the certificate, and what is the moisture? - Is the amino acid profile lot-specific or a typical profile? - What is the gluten result, by which method, and what is the shared-line position? - If the lot is disputed, will you accept a joint re-test on the retain? Five direct answers amount to an identity file; a single percentage does not. The oat protein page holds the catalog range; the COA page locates each figure on the certificate; the grades page compares the forms; the whey protein concentrate page is the animal-protein comparison; the methods library explains the protein methods; the quality page describes the release file. ### 01 What the COA for PQQ free acid actually contains URL: https://nutrition.rainwoodbio.com/products/specialty/pqq-free-acid/coa/ Reviewed: 2026-11-20 A PQQ free-acid lot is released on an HPLC assay of at least 98.0%, a loss on drying of no more than 1.0%, an HPLC/UV identification and an 80 mesh particle size. The certificate is the document that shows those results for the pack in hand. It should also carry a sodium result, because the form named on the label is only a claim until the counter-ion is shown to be absent. In one lineA free-acid certificate is complete only when the assay carries its basis, the moisture result sits beside it, and the sodium figure is reported at or near zero. ## Reading the certificate line by line Each line of the certificate should stand on its own: the parameter, the analytical method, the acceptance limit and the result for the lot. A report that prints “conforms” beside a method name but omits the number cannot be compared with a second supplier's report, and it cannot be audited later. The four fields are the minimum unit of evidence. HPLC retention and UV absorbance establish the PQQ skeleton. They do not establish the salt form, because the free acid and the disodium salt share the same chromophore. A sodium determination is what turns the named form into a demonstrated one, and the catalog does not include it as a routine release test, so it has to be requested. Release tests and the additional form check | Parameter | Method | Limit or note | Appearance | Visual | Red-orange to brown powder | Identification | HPLC retention and UV spectrum | Conforms to the reference | Assay | HPLC | ≥98.0%; the basis is stated | Loss on drying | Gravimetric | ≤1.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh | Sodium (form check) | ICP-OES | Reported; the free acid carries no counter-ion ## The assay basis and the moisture beside it The HPLC assay is quoted as ≥98.0%, and the figure needs a declared basis. If the laboratory reports on the material as received, moisture is already inside the number; if it reports on the dried material, the loss on drying has been removed. At a 1.0% moisture ceiling the gap is small, but a certificate that omits the basis can make a passing lot look failing: 98.0% on the dried basis at 0.9% moisture is 97.1% as received. The moisture result is a line of its own. A lot released at 0.9% has almost no room before the 1.0% ceiling, so the storage condition and the seal become part of the release decision in practice. The certificate should print the measured value, not a statement that the limit was met. UV identification carries conditions too. The spectrum of PQQ can shift with pH and solvent, so the certificate should say where the spectrum was obtained. A trace recorded on the sodium salt in water is not a valid comparison for the free acid dissolved in an organic solvent. ## The limit column and the result column The acceptance limit and the measured result answer different questions, so they belong in different columns. A result column that repeats the specification range has told the reader nothing about the lot. The page below is the minimum that makes a release decision possible from the certificate alone. How each release result should be written | Test | What the limit says | What the lot result looks like | HPLC assay | ≥98.0%, with the calculation basis named | A number, its basis and the method | Moisture | ≤1.0% by gravimetry | A measured percentage | Metal panel | A limit for each element | One figure per element, in mg/kg | Microbiology | Counts plus absence | The count and the absence call for the lot | Mesh | ≥95% through 80 mesh | The percentage that passed the sieve | Sodium | No catalog limit; report it | A percentage and the method For the metal panel, one figure per element is the only usable form; a combined total can conceal the element that is closest to its ceiling. The micro line should carry a count and a separate absence call. Sodium needs a number and a named method, because “absent” is not something a laboratory can sign. A certificate that offers only “passes specification” has left the reader to trust a conclusion instead of checking the numbers. ## What shifts from lot to lot Colour, assay and impurity profile track the fermentation and the isolation. Moisture tracks the dryer. The 80 mesh value tracks the mill and the sieve, and it can move without any change to the chemistry. A shade inside the red-orange to brown range is not, by itself, a reason to reject a lot. Sodium is the most informative trend line on this product. If the route acidifies a sodium salt, the wash step decides how much sodium remains; a direct isolation route has a different control point but the same measurement. Small upward steps across lots deserve a process question even when each lot is inside its other limits. Look at the direction of travel: assay falling toward 98.0%, moisture rising toward 1.0%, an extra peak in the chromatogram, or sodium creeping up. Keep the certificate lot code tied to the pack and to the retained sample, so the trend can be reconstructed. ## When a third party should test An outside laboratory is worth the time for a new source, an unfamiliar process, a first shipment to a regulated market, a disputed form, or a result that does not fit the trend. The panel should be chosen to answer the open question rather than to repeat the whole certificate. For a free-acid lot, the minimum is HPLC with the UV spectrum, moisture, ICP-MS metals, microbiology and sodium by ICP-OES. Add XRD if the solid form is disputed and a solvent screen if the process uses one. The report should state the detection limit behind every “not detected” entry, because a method with a high limit can miss the contaminant that matters. Retain the sample that was tested and identify the lot on the report. If a result is contested, the referee should receive the retained sample, the original certificate and the specification, and should be asked for the discriminating test, not another run of the same assay. ## Comparing two suppliers Seven fields are enough to expose a difference between two offers: form and CAS; assay and basis; HPLC/UV identity; moisture; sodium; contaminants and microbiology; pack and lot code. An apparent match on assay can hide a different form, a different basis or a different moisture ceiling. The catalog specification sits on the PQQ free acid product page. The grades page compares the free acid with the disodium salt, and the identity page sets out the tests that separate the forms. The methods library describes the HPLC and ICP-OES work, the quality page covers release, and the disodium specification is on the PQQ salt page. ### 02 PQQ free acid grades: mesh, granulation and the salt question URL: https://nutrition.rainwoodbio.com/products/specialty/pqq-free-acid/grades/ Reviewed: 2026-11-20 PQQ free acid is supplied as a red-orange to brown powder at ≥98.0% by HPLC, loss on drying ≤1.0% and ≥95% through 80 mesh, with granulation available on request. Those options do not change the molecule. The choice is the particle size and flow the dosage form needs, and whether the formula should use the free acid at all instead of the disodium salt. In one lineThe free acid has one chemistry; the grade is the particle size, the granulation and the purity written into the specification. ## Why a single form still has grades PQQ free acid is one chemical entity, so a grade cannot mean a different salt or a different hydrate. What changes between the standard powder and a granulated lot is the particle-size distribution, the flow and the dust. What changes between suppliers is the assay floor, the moisture limit and the impurity profile. The 80 mesh specification is a finishing decision. A fine powder fills a capsule evenly but can bridge in a hopper and hang in the air; a granulated powder flows better and dusts less, at the cost of a slower dissolution. The catalog offers the 80 mesh powder as standard and granulation on request; the particle-size line moves with the choice. Assay and moisture are release gates, not grades. A 98.0% lot and a 99.0% lot are the same grade; the second gives the formulator more room in the fill weight, and that is a specification decision rather than a new material. ## The free acid against the disodium salt The comparison that matters most is not between two free-acid powders. It is between the free acid and the disodium salt, because the two are different label ingredients and the names are often used interchangeably in a request. Free-acid options and the disodium salt they are often confused with | Property | Free acid, standard | Free acid, granulated | Disodium salt | CAS number | 72909-34-3 | 72909-34-3 | 122628-50-6 | Assay | ≥98.0% (HPLC) | ≥98.0% (HPLC) | 98.0–102.0% (HPLC, anhydrous) | Loss on drying | ≤1.0% | ≤1.0% | ≤5.0% | Particle size | ≥95% through 80 mesh | Set by the granulation | ≥95% through 40 mesh | Sodium | None in the molecule | None in the molecule | About 12.3% by mass | Water solubility | Slight; soluble in alkaline solutions | Slight; soluble in alkaline solutions | Soluble | Label name | Pyrroloquinoline quinone | Pyrroloquinoline quinone | Pyrroloquinoline quinone disodium salt Granulation changes the particle size, not the assay or the solubility. The disodium salt changes the identity, the sodium load and the market file. A request that says only “PQQ powder” has not chosen between them. ## Solubility, colour and handling The free acid is slightly soluble in water. It dissolves in alkaline solutions because the acid protons are lost and the molecule becomes the anion; the solution is reddish-brown, and its pH is set by the base used, not by the powder alone. A formulator who raises the pH to dissolve the free acid is making the salt in the vessel, and the sodium or potassium from that base is now part of the formula. In the dry state the powder is a red-orange to brown solid. The colour window is wide and covers fermentation and drying variation; it is not an assay. The 80 mesh powder is fine enough to dust, so handling needs containment and the pack stays closed between uses. Light is a second handling issue: the powder belongs in the foil pouch or an opaque container, not a clear jar. Bulk density and flow are not on the catalog certificate. If the capsule machine or the blend line needs a number, ask for it as a separate measurement taken on the lot you will use; a value from another lot is a starting point, not a release result. ## Dose arithmetic and the dosage form When the label declares the free acid, the weigh-up uses the free acid and the assay correction only: 20 mg declared at 98.0% assay needs 20 ÷ 0.98 = 20.41 mg of powder. When the label declares the disodium salt but the formula uses the free acid, the label and the powder no longer describe the same ingredient, and the conversion factor 0.8825 cannot repair that. Going the other way, 20 mg of disodium salt carries 17.65 mg of free-acid equivalent. A formula built on 22.66 mg of disodium salt for a 20 mg free-acid declaration needs 20 mg of the free acid, not 22.66 mg, because the sodium has been removed from the mass. The dosage form decides the grade. A capsule or tablet takes the 80 mesh powder, or the granulated form if flow is the constraint. A dry blend takes either, but a granulated powder segregates less. A clear drink is a poor fit for the free acid: the low water solubility and the alkaline pH needed to dissolve it both become formulation problems. ## Specification lines to fix before ordering - “Pyrroloquinoline quinone, free acid, CAS 72909-34-3, C14H6N2O8.” - “Assay ≥98.0% by HPLC; the basis, as-is or dried, is stated on the certificate.” - “Loss on drying ≤1.0%.” - “Sodium reported; the free acid carries no counter-ion.” - “Particle size ≥95% through 80 mesh; granulation only by written agreement.” - “Heavy metals and microbiology as listed; residual solvent where the process uses one.” - “Light-resistant pack; storage condition and retest period stated.” - “Destination market and label name confirmed before the order.” The product page carries the catalog figures. The free acid against disodium comparison takes the solubility and sodium questions further, the identity page covers the tests that separate the forms, and the PQQ disodium page is the other product, not another grade. ### 02.1 PQQ free acid vs disodium: solubility, sodium and the label URL: https://nutrition.rainwoodbio.com/products/specialty/pqq-free-acid/grades/pqq-free-acid-vs-disodium/ Reviewed: 2026-11-20 Two sodium ions separate the free acid from the disodium salt: the formula weight rises from 330.21 to 374.17 g/mol, the salt contains about 12.3% sodium, and its water solubility is far higher. Those changes reach the label as a different ingredient name, a different mass per serving and a different regulatory citation. In one lineAdding two sodium ions raises the formula weight by 43.96 g/mol, puts about 12.3% sodium into the powder, makes it water-soluble, and changes the label name and the market file. ## What the two sodium ions change Free acid and disodium salt: the same quinone, a different salt | Property | Free acid | Disodium salt | CAS number | 72909-34-3 | 122628-50-6 | Formula | C14H6N2O8 | C14H4N2Na2O8 | Molecular weight | 330.21 | 374.17 | Sodium content | None | About 12.3% | Catalog assay | ≥98.0% (HPLC) | 98.0–102.0% (HPLC, anhydrous) | Loss on drying | ≤1.0% | ≤5.0% | Water solubility | Slight; soluble in alkaline solutions | Soluble | Label name | Pyrroloquinoline quinone | Pyrroloquinoline quinone disodium salt | EU novel-food entry | Not covered by the entry | The form the entry names The only structural change is the replacement of two acid protons by two sodium ions. The third carboxylic acid group stays as it is, which is why the free acid is still an acid and why it can be dissolved by adding base. The 43.96 g/mol difference is the two sodium atoms less the two protons they replace. ## Solubility and what it does to the formula The free acid dissolves poorly in water on its own. A base removes the acidic protons and the molecule becomes an anion, which is soluble; the liquid turns reddish-brown. The base is a formulation choice with consequences: it introduces sodium or potassium and fixes a pH, and both belong in the label calculation. The salt needs no base. It dissolves directly and gives the same reddish-brown colour, which is why it dominates aqueous formats such as stick packs and ready-to-drink mixes, and why the commercial specification and the main regulatory entry are built around it. Colour is not a form test, because both forms can produce it. Solid dosage forms can use either, but the fill weight differs. In a dry blend, the free acid's poor water solubility becomes relevant if the blend is dispersed in water by the consumer. Decide the dosage form first; the form follows. ## Sodium and the label arithmetic The salt is about 12.3% sodium by mass, so 20 mg of it contributes 2.46 mg sodium and 100 mg contributes 12.29 mg. The free acid contributes none from the molecule. That difference can matter in a product where the sodium total is under scrutiny, but it is not the only source: a base used to dissolve the free acid adds sodium or potassium and must be counted. A sodium-free claim is a separate label decision. It depends on the measured sodium in the finished product, the serving size and the threshold in the market, and it cannot be inferred from the ingredient name. The certificate supplies a number; the claim is a review. ## Dose conversion between the salts Convert with the molecular-weight ratio: 330.21 ÷ 374.17 = 0.8825. To express a disodium quantity as free-acid equivalent, multiply by 0.8825; to go the other way, divide. The ratio comes from the formula and does not change with assay. Two examples show where the factor is used. If the target is 20 mg of PQQ expressed as free acid and the salt is the source, the weigh-up is 20 ÷ 0.8825 = 22.66 mg of disodium salt. If the label declares 20 mg of disodium salt, the free-acid equivalent is 20 × 0.8825 = 17.65 mg. If the label and the powder are both the free acid, no form factor applies; only the assay and moisture corrections do. These are arithmetic examples, not intake recommendations. Assay and moisture are a second correction, independent of the form. A dried-basis assay has to be converted to the as-received basis before weighing, and the form factor is applied after that if the label uses the other form. Doing the two steps in the wrong order is a common source of a label that does not match the batch. ## Naming the form on the panel In the EU, the novel-food entry is written for the disodium salt, and that is the position at this review; the entry's authorisation is tied to the salt and its specification. A free-acid ingredient is a different article, and the entry's daily maximum cannot be read across to the acid without a regulatory decision. The buyer's team should confirm the position, and check the current text, before the label is designed. In the US, the Supplement Facts box carries the ingredient declaration and has to name the dietary ingredient; “PQQ” is not specific enough to distinguish the forms. In GB the register has its own conditions, and Northern Ireland follows the EU list. The panel should carry the form named in the market file, not whichever form the buyer happened to order. ## Choosing a form The free acid is the right starting point when the label names it, when the formulation is non-aqueous or when sodium from the ingredient is unwanted, and when the destination file covers it. The disodium salt is the practical choice for water-based formats and for markets whose file is written around the salt. Changing from one to the other is a change of specification, not a unit conversion at the balance. It requires a change protocol, a revised specification and a fresh label review. The free-acid product page carries the catalog figures; the grades page places the form in the range; the identity page covers the analytical check; the PQQ disodium page is the other product; the disodium comparison gives the salt-side view; the quality page covers release. ### 03 PQQ free acid stability: light, moisture and the alkaline solution URL: https://nutrition.rainwoodbio.com/products/specialty/pqq-free-acid/stability/ Reviewed: 2026-11-20 The free acid is a light-sensitive solid with a tight moisture limit of 1.0%, and it is only slightly soluble in water. Those two facts set the storage format: a sealed, opaque pack and a dry store. An alkaline solution will dissolve it, but the dissolved form brings pH, oxygen and light into play, so a liquid needs its own data. In one lineThe dry powder is the stable format; light, moisture and an alkaline solution are what shorten the shelf life. ## The dry powder: light, water and colour The 1.0% moisture ceiling is not generous. Once the pouch is open, the powder can take water from the air, the as-received assay drops and the colour may darken. The pack should be closed between weighings, and the material should stay in the original foil or in an opaque container that seals properly. A clear jar is not a storage vessel for this powder. PQQ absorbs ultraviolet and visible light, and a bench, a window or a laboratory lamp will expose it. The foil pouch is the barrier; an opened pouch that has been rolled down is a temporary closure, not a seal. Temperature acts on both moisture and light damage. A normal warehouse is acceptable for a sealed pack; a hot loading area or a vehicle is not. If the pack has been cold, let it warm to room temperature before opening it, so water does not condense on the powder. ## The solution: alkaline, and less forgiving Water alone dissolves very little of the free acid. Adding base removes the acid protons and the molecule goes into solution as the anion, giving a reddish-brown liquid. The base is now part of the formula: it contributes a counter-ion, usually sodium or potassium, and it sets a pH that has to be controlled and declared. Once dissolved, the material is exposed to light, oxygen, heat and trace metals at the same time. PQQ is a quinone and takes part in redox reactions, so dissolved oxygen and iron or copper contamination are relevant, not theoretical. A clear bottle with a metal closure combines several of these exposures. A liquid route is possible, but it needs its own work: light protection, a recorded pH, low dissolved oxygen, compatible contact materials and a validated hold time. Data from the powder does not describe the drink, because the matrix, the process and the pack all change the rate. ## The variables that age the powder What ages the free acid in storage | Variable | Effect | Control | Light | Colour and assay drift | Foil or opaque pack; dark store | Moisture | Higher moisture; lower as-received assay | Sealed pouch; closed liner | Heat | Faster change on both fronts | Controlled store; cool process | Oxygen | Oxidation, mainly after dissolution | Low headspace; low dissolved oxygen | pH | Solubility, colour and solution stability | Set, record and validate the pH | Metal ions | Complexation and colour change | Stainless or plastic contact; keep iron and copper out The factors reinforce one another. A warm, bright and damp store is not three independent penalties, and an alkaline solution in clear glass is not one variable but three. The question to ask is always the same: which pack, which matrix, how long. ## Designing the stability study A study should record the pack, the storage condition, the sampling points and the tests. 25 °C/60% RH and 30 °C/65% RH are the usual warehouse conditions; 40 °C/75% RH is the stress condition for the pack. A light-exposure arm is essential here, because a dark chamber will not reveal the dominant failure mode. At each point, measure assay with its basis, moisture, appearance and UV identity; add microbiology at the end points. A capsule or tablet should be tested in its matrix, and a liquid at its process pH and heat load. Individual results, not a summary verdict, are what let a reviewer see a trend. Buy data for the pack you will use. A pouch and a drum differ in headspace, in the surface exposed to the liner and in how often they are opened, so a result from one does not describe the other. ## The matrix changes the result A capsule or tablet has low water activity, but the shell and the excipients can still transfer moisture into the fill, so moisture and appearance should be checked after storage as well as at release. A powder blend is more exposed: an alkaline excipient plus a little water can neutralise the acid at the particle surface, and that should be looked for in a stress test rather than discovered in a market complaint. In a stick pack, the seal is the likely failure point; a pinhole is enough. In a beverage, pH, heat and oxygen all act on the ingredient, and the bulk data is only a starting point. An overage belongs to the label and stability review and cannot compensate for a pack that is not tight. ## Where the shelf-life figure comes from A single shelf-life figure would be misleading for this product, because the pack and the storage condition determine the result. The retest period on the specification should be tied to a pack and supported by data for that pack. Without those two pieces, a number is only an assertion. At the end of the retest period, re-test the retained sample before extending use, and do not transfer a bulk value to a repacked container. The product page carries the pack list; the COA page explains the release tests; the MOQ page gives pack sizes and dispatch; the methods library covers the assays; the quality page describes the release file. ### 04 PQQ free acid: MOQ, packs and what a quote needs URL: https://nutrition.rainwoodbio.com/products/specialty/pqq-free-acid/moq/ Reviewed: 2026-11-20 PQQ free acid starts at 1 kg, packed in a foil pouch; a 25 kg fiber drum is the bulk option, and standard dispatch is quoted at 1–7 days. To turn that into a firm quotation, the request has to name the free acid and CAS 72909-34-3, the assay basis, the pack, the destination and the documents required. In one lineA one-kilogram pouch is the first orderable pack because it is a lot in its own right, with a code, a test file and a sample held back; everything else is settled in the quotation. ## The 1 kg starting point The 1 kg pouch is a practical unit for qualification: it supplies a bench trial, a sample to retain and enough material for an independent check, and it can travel as a parcel. It is also the smallest unit that keeps a single lot code from filling through delivery. A smaller quantity is normally taken from a larger lot and repacked, which adds a handling step and breaks the link between the sample and its original pack. The 25 kg drum is the production unit. It cuts the handling per kilogram, but it ties up more inventory and keeps a light-sensitive powder in storage for longer, so the order size should follow the campaign rather than the other way round. The minimum is about packaging, not about persuading a buyer to take more. ## Pack options Packs offered for PQQ free acid | Pack | Fill | Where it fits | Handling | Foil pouch | 1 kg | Small batch, trial and sample | Opaque barrier; keep closed between uses | Fiber drum | 25 kg | Production | Liner closed; lot code on drum and liner | Granulated | On request | Dust and flow control | Particle profile fixed in writing The standard powder passes 80 mesh at ≥95%. Granulation is a specification change, not a packing variant: it alters the particle-size result and can alter the schedule. Mention it in the enquiry so the quotation reflects it. ## Dispatch and transit Standard dispatch is quoted at 1–7 days after the order is confirmed. That covers preparation of the pack and its documents, not transit, customs or the customer's inbound release. A granulated or otherwise non-standard lot needs its own date. Ask for the date the pack leaves, not just the range. A 1 kg pouch usually travels as a parcel and a 25 kg drum as a pallet; the Incoterm then decides who arranges the movement and who clears it. The COA and the other lot papers should be in the same shipment as the powder, not sent separately. ## Building a comparable quotation Six details make an offer comparable: - The material. Pyrroloquinoline quinone free acid, CAS 72909-34-3. “PQQ” by itself does not identify a form. - The release specification. Assay and basis, moisture, sodium, mesh, metals and micro. - The pack and quantity. 1 kg pouch, 25 kg drum, or granulation by agreement. - The destination and Incoterm. Country, delivery point and trade term. - The document set. COA, specification, SDS and any statement the importer needs. - The application and market. Dosage form and the country of sale. Leave out the form, the sodium line or the destination and the offer cannot be compared with another. The documents are part of what is being bought, and commercial terms belong on the quotation rather than on a web page. ## Qualification, not a demonstration Qualification starts with the 1 kg pouch. Before scaling, check identity by HPLC/UV, assay with its basis, moisture, sodium and microbiology, and retain material from the same pack. The sample's lot code, the certificate's lot code and the quotation should be the same code. A sub-kilogram trial is drawn from a bulk lot and repacked. It carries its own handling record and is not the catalog pouch. Put the split in writing and keep the repack lot code with the trial data; the trial powder and the production powder can be different lots even when the specification is the same. ## Agreeing terms before ordering Put the commercial and quality terms in one agreement: Incoterm, pack, dispatch window, specification revision, a certificate for every lot, the sample kept on file, the retest date and the change route. It is easier to agree before the first production order than after a disagreement. If a lot falls outside the agreed specification, the evidence is the retained sample and a joint test against the named method. A photograph of the drum is not a result. The agreement should also name the referee laboratory and say who pays for it, so a return does not turn on appearance alone. Catalog figures sit on the product page. Release testing is explained on the COA page; the compliance page deals with market files; the glossary entry defines MOQ; the logistics page covers freight and paperwork. ### 05 The regulatory file for PQQ free acid URL: https://nutrition.rainwoodbio.com/products/specialty/pqq-free-acid/compliance/ Reviewed: 2026-11-20 PQQ free acid is the material with CAS 72909-34-3, and every document in the file should say so. The EU novel-food entry, as of this review, describes the disodium salt rather than the free acid, so the disodium citation should not be assumed to cover the free acid. The destination route for the free acid is for the buyer's regulatory team to confirm. In one lineThe disodium entry does not travel with the free acid: the file names the form, the destination and the basis for the finished product. ## What the file has to hold The folder has four parts: the specification version that applies to the free acid, the lot certificate, the destination requirements for limits and labelling, and the change-control record for source, process and pack. The certificate speaks for one lot, the TDS defines the specification and the SDS is about handling; none of the three establishes the market route. The importer will also want statements on allergens, GMO status, origin, residual solvents where relevant and sodium. A missing statement is easier to obtain before the order than after the container arrives. Put a dated contents list at the front of the folder so a reviewer can see what is present and which version is current. ## European Union In the EU, the PQQ novel-food entry names the disodium salt, limits its use to adult food supplements and attaches a specification and a daily maximum. The free acid is a different form, and a higher assay or a similar colour does not bring it inside that entry. Whether any route is available for the free acid is a question for the buyer's regulatory team, and the current consolidated text should be read before the label is set. Labelling, general food law and contaminant rules apply in addition to the novel-food route. The EU notes gather the reference texts. ## United States In the US, the file turns on the dietary-ingredient status of the exact form and on the basis the supplier cites. A basis that was developed for the disodium salt does not automatically describe the free acid, and the buyer should check that it reaches the finished product and the intended claim. A structure/function statement needs substantiation and the DSHEA disclaimer; a disease claim is not available. ## United Kingdom Great Britain and Northern Ireland do not share one route. GB uses its own register and labelling rules; Northern Ireland remains under the EU framework, including the disodium entry. The delivery address determines which one applies, and the buyer should record the decision with the order. ## Limits and contaminants The figures below are the catalog release limits for the material. They are not automatically the finished-product limits: the destination text and the daily dose determine that, and the lot result has to be carried through the dose calculation. Catalog limits and the evidence to keep | Parameter | Catalog limit | Evidence to keep | Lead (Pb) | ≤3 mg/kg | Result, method and the finished-product calculation | Arsenic (As) | ≤2 mg/kg | Result and method | Cadmium (Cd) | ≤1 mg/kg | Result and any category exception | Mercury (Hg) | ≤0.1 mg/kg | Result and method | Sodium | Reported, not a catalog limit | The measured figure and its method Each metal needs a separate result. A combined figure is not usable for a finished-product calculation, and it can hide the element closest to its limit. Sodium is not a catalog limit, but the file should carry the measured value because it is the evidence for the form. ## Claims and the label name The name on the panel is part of the compliance question. “PQQ” does not distinguish the free acid from the disodium salt, and the market file applies to a specific form. The EU entry designates the disodium salt; the US Supplement Facts box carries the dietary-ingredient declaration. Either way, the name should match the form the file covers. No disease claim is available in either market. Mechanism language is not an authorisation, and US structure/function text needs substantiation and the DSHEA disclaimer. A sodium-free statement is a separate decision based on the measured sodium, the serving size and the local threshold; the words “free acid” do not establish it. ## The document set The folder should contain the COA with the HPLC assay and its basis, the UV identity, moisture, metals and micro, plus sodium by ICP-OES where the form is in question. Add the specification, TDS, SDS, allergen and GMO statements, origin and residual-solvent statements. The product page publishes the catalog specification; the disodium page is a different material with a different file. ## Pre-order checklist - The specification, CAS number and form agree across the file. - The certificate gives the assay basis and a sodium result. - COA, TDS, SDS, allergen, GMO, origin and solvent statements are present. - Label wording and claims have a destination review on file. - Metal results are expressed against the finished-product dose. - Source, process and pack are covered by change control. - Quotation, specification and certificate are the same revision. The quality page describes the release file, the EU notes provide the framework references, and the identity page covers the analytical evidence. ### 06 How we prove a PQQ lot is the free acid URL: https://nutrition.rainwoodbio.com/products/specialty/pqq-free-acid/identity/ Reviewed: 2026-11-20 The free acid is proved by a document that names the form, an HPLC/UV match to a PQQ reference, a sodium result that is low or not detected, and a mass balance that reconciles assay, moisture and impurities. None of those checks is sufficient alone. In particular, an assay percentage cannot tell the free acid from the disodium salt, because both contain the same quinone. In one lineIdentity is the agreement between the named form, the HPLC/UV match, a sodium figure at or near zero and a mass balance that closes. ## Four separate checks Identity is built from independent measurements, and each one answers a different question. Paperwork establishes what the supplier says the lot is; chromatography establishes the molecule; the counter-ion establishes the form; the mass balance establishes whether the numbers are consistent with an undiluted solid. An answer that stops at the first layer restates the label rather than testing the powder. Four checks that establish the free acid | Layer | Question | Test | What it proves | Paper | What does the supplier declare? | Name, CAS number, formula | A starting claim | HPLC/UV | Is the molecule PQQ? | Retention time and spectrum | The quinone, not the form | Sodium | Is a counter-ion present? | ICP-OES | Free acid versus salt | Balance | Is the solid diluted? | Assay, moisture, impurities | Arithmetic consistency ## The sodium ratio and the mass balance The free acid has no sodium in its formula, so no sodium is expected from the molecule itself. In the disodium salt, two sodium atoms contribute 45.98 of the 374.17 g/mol formula weight, which is 12.29%. A certificate that shows about 12.3% sodium is describing the salt, not the free acid; an intermediate figure is what a blend of the two forms looks like. That is why the sodium result is a form test and not a purity test. Mass balance is the second arithmetic check. On a dried basis the assay plus impurities should approach 100%, and the as-received assay should reflect the moisture: a solid at 99.0% dried with 0.5% moisture is 98.5% as received. A gap that is larger than the measured impurities suggests something unaccounted for, whether water, a carrier or a counter-ion. Because sodium is outside the catalog release panel, it is ordered as an additional test. It is most useful for a new source, a disputed form, or a label that names the free acid while the certificate says only “PQQ”. Solution pH can support the picture but should not be treated as a quantitative check: concentration and residual acid move it. ## X-ray diffraction and the solid form Diffraction looks at the packing of the solid, not at the molecule in solution. A crystalline free-acid lot gives a pattern that can be compared with a reference; an amorphous diluent gives a broad halo instead. The technique can support a form claim or compare two sources, but it neither measures sodium nor replaces an assay. A “matches reference” statement is only as useful as the reference and the detection limit behind it. Ask for the pattern, the reference material and the limit of detection. XRD is not a routine release test here; a certificate that mentions it without data has added a word, not evidence. ## How a substitution shows up Substitutions and how they show up | Substitution | What it does | Signal | Test | Disodium salt | Brings sodium; dissolves more readily | Sodium around 12.3% | ICP-OES, pH, solubility | Inert dilution | Pulls the assay below the floor | Assay low; balance gap | Assay, moisture | Related quinone | Similar colour, different retention | Extra peak; spectrum shift | HPLC/UV, high-resolution MS | Colourant | Imitates the visible colour | Visible colour, no spectral match | UV scan and HPLC | Water | Lowers the as-received assay | Moisture above the lot trend | Loss on drying Colour is easy to fake and hard to quantify. The red-orange to brown range is broad, and a dye can sit inside it. The sodium figure, the spectrum and the mass balance are the checks that are difficult to reproduce with a substitute. Appearance and assay alone would not catch the most likely substitution, because the counter-ion is what changes. ## Specification lines that prove the form - “Pyrroloquinoline quinone free acid, CAS 72909-34-3, C14H6N2O8.” - “HPLC assay ≥98.0%, with the calculation basis stated.” - “Loss on drying ≤1.0%, reported as a measured value.” - “HPLC retention plus UV spectrum, with solvent and wavelength recorded.” - “Sodium by ICP-OES reported; no counter-ion is expected.” - “≥95% through 80 mesh, with the metal and micro panels as listed.” - “Disodium salt and unrelated quinones below the agreed limits.” ## Questions to put to the supplier - What form does the certificate name, and which CAS number does it carry? - Will you send the chromatogram and the UV spectrum, including the solvent and wavelength? - What sodium figure did ICP-OES return, and which method was used? - What is the measured moisture, and was the assay calculated as received or dried? - If we disagree, will you re-test the retained sample jointly? Those five answers, taken together, are an identity file; a percentage on its own is not. The product page carries the catalog figures, the COA page maps each figure to its certificate line, the grades page compares the free acid with the salt, and the disodium grades page describes the other side. The XRD method note explains the solid-state test. ### 01 What the COA for R-alpha-lipoic acid actually contains URL: https://nutrition.rainwoodbio.com/products/specialty/r-alpha-lipoic-acid/coa/ Reviewed: 2026-11-20 An R-alpha-lipoic acid certificate carries appearance, infrared and HPLC identification, assay by HPLC at 99.0–101.0%, specific rotation, melting point at 46–50 °C, loss on drying at ≤0.5%, heavy metals, microbiology and an 80 mesh sieve result. Read alone, the assay fits both optical grades, so the certificate proves the R form only when the rotation and the melting range are read beside it. The table below is the catalog specification; the batch certificate fills the result column for one pack. In one lineA lipoic acid assay without a rotation and a melting range does not identify the R grade, and a percentage without its moisture basis does not identify the powder. ## The certificate as a test report For each parameter the reader needs the measurement, the method behind it and the limit the lot was released against. “Conforms” on its own records a decision and hides the number. The identity line should name infrared and HPLC together: the infrared spectrum carries the carboxyl band and the disulfide region, and the HPLC retention carries the whole molecule. Identity, assay and release limits · R-alpha-lipoic acid | Parameter | Method | Release limit | Appearance | Visual | Yellow to pale yellow powder | Identification | Infrared and HPLC | Conforms to the reference | Assay | HPLC against an external standard | 99.0–101.0% | Specific rotation | Polarimetry, c = 1, ethanol | +110° to +125° | Melting point | Capillary method | 46–50 °C | Loss on drying | Gravimetric | ≤0.5% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh ## Assay, basis and the mass balance The assay is read against an external standard, which is why the window runs to 101.0% rather than stopping at 100%. A figure above 100% is a ratio to that standard, not permission to accept 103%. The certificate should also name the basis. At ≤0.5% loss on drying the two bases differ by at most about half a point, which is enough to cross the 99.0% limit. A lot read at 99.0% as-is with 0.5% water calculates to about 99.5% dried, and those two numbers describe different powders. The rest of the mass balance sits in the other lines. Pure lipoic acid is 31.1% sulfur, so a sulfur figure well under that points to dilution rather than to weak material. The melting range and the rotation are the third and fourth checks, and both belong to the R grade rather than to lipoic acid in general. An achiral HPLC peak cannot separate enantiomers; rotation or a chiral column does that work, as the identity page sets out. ## Release limit versus batch result A limit is the boundary a lot was released against; a result is what the bench measured. Keep them in separate columns with the method beside each line. Copying the range into the result column answers nothing. What the result column should contain | Parameter | Release limit | Result column | Assay | 99.0–101.0% by HPLC | Measured percentage plus its basis | Specific rotation | +110° to +125° (c = 1, ethanol) | Measured value with solvent and concentration | Melting point | 46–50 °C | Start and end of the measured range | Loss on drying | ≤0.5% | Measured percentage | Heavy metals | Per element | mg/kg for each element | Particle size | ≥95% through 80 mesh | Percentage passing the sieve The reader should be able to reach “passes” from the numbers without taking it on trust. Metals need a figure per element: one summed value hides which element failed. Rotation needs its solvent and concentration, and the melting result needs both ends of the range rather than a midpoint. ## What moves between batches Lot to lot, the assay, colour, moisture and sieve result follow the resolution step, the crystallisation and the milling. Rotation is the tightest line on the sheet and the one that carries the optical claim: material that has lost optical purity can still pass 99.0–101.0% by HPLC, because the achiral method sees both enantiomers as one peak. The melting range is the second tell. A solid that melts at 46–50 °C sits close to summer warehouse temperatures, and a lot that has melted and set again is no longer the same powder: it can arrive as a glassy mass with a shifted range. A soft or caked drum is a handling question, not a cosmetic one, so read the batch record before rejecting on appearance. A direction across several lots carries more weight than one result at an edge: rotation moving toward zero, assay drifting low, moisture climbing, or a melting range stuck at the bottom of the window. Pouch, drum and retained sample should all carry the code printed on the sheet. ## When to order an outside test An outside test earns its place with a new source, a first shipment into a regulated market, an optical claim the supplier's certificate does not support, or a disputed lot. The panel is not a copy of the certificate: chiral HPLC or polarimetry in ethanol for the form, infrared, melting point, loss on drying, ICP-MS and micro. Where dilution is suspected, add elemental sulfur. Insist on the detection limit for every screen. “Not detected” without a limit says something about the method, not about the sample. The portion tested should be the retained portion, the report should name the lot, and a dispute should go to a referee laboratory both sides accept rather than to a second run of the same in-house method. ## What to compare between suppliers Six lines make two suppliers comparable: optical form and CAS number; assay and basis; rotation with solvent and concentration, plus the chiral result if one is offered; melting point; moisture, metals and micro; pack and lot code. Quotations that match on assay but not on form are describing different powders. The specification is published on the R-alpha-lipoic acid page. The form comparison is on the grades page and at more length on the R form against racemic page; the assay method is described in the HPLC method note; the release workflow is on the quality page. ### 02 R-alpha-lipoic acid grades: optical form, mesh and blend URL: https://nutrition.rainwoodbio.com/products/specialty/r-alpha-lipoic-acid/grades/ Reviewed: 2026-11-20 R-alpha-lipoic acid is the single R enantiomer, CAS 1200-22-2, specified at 99.0–101.0% by HPLC, melting at 46–50 °C and milled to ≥95% through 80 mesh. The racemic grade, CAS 1077-28-7, is a roughly 1:1 mixture of the R and S forms and melts at 60–62 °C; it shares the formula but not the optical composition, so it carries a different specification, a different label name and about half the R content per milligram. The grade decision is an optical decision before it is a particle-size one. In one lineThe two grades share a formula but not a specification: the optical form sets the assay, the rotation, the melting point and the R content of every milligram. ## Why the same molecule is sold as two grades Alpha-lipoic acid has one stereocentre, at the ring carbon that carries the pentanoic acid chain, so the molecule exists as two mirror-image enantiomers. Where the centre is left uncontrolled, both enantiomers appear in equal amount; controlling it, or resolving the mixture afterwards, gives the R grade. The connectivity is identical, so the formula, the molecular weight of 206.33 and the 31.1% sulfur figure describe both grades equally well. The racemic grade is the simpler manufacture and the form the wider category has used; the R grade needs the unwanted S enantiomer separated or never formed, which is why its specification carries an optical line the racemic grade does not need. Neither grade is a diluted or coated version of the other. They are two purchase items with two CAS numbers, and a purchase order that names “alpha-lipoic acid” without the optical form has specified neither. Switching grade changes four things at once: the CAS number, the melting point, the optical evidence on the certificate and the name that goes on the label. It also changes the mass that delivers a declared R amount, which is the arithmetic that catches most label errors. ## The two grades side by side R-alpha-lipoic acid against racemic alpha-lipoic acid | Property | R grade | Racemic grade | CAS number | 1200-22-2 | 1077-28-7 | Formula and molecular weight | C8H14O2S2, 206.33 | C8H14O2S2, 206.33 | Optical composition | The R enantiomer; the (+)-form | R and S, about 1:1 | Assay by HPLC | 99.0–101.0% | 99.0–101.0% | Specific rotation | +110° to +125° (c = 1, ethanol) | No net rotation | Melting point | 46–50 °C | 60–62 °C | Particle size | ≥95% through 80 mesh | ≥95% through 40 mesh | Label name | R-alpha-lipoic acid | Alpha-lipoic acid | R content per 100 mg | About 99.5 mg at 99% ee | About 50 mg ## Melting point, mesh and handling The melting point is the most practical difference in the warehouse. A solid that melts at 46–50 °C is soft on a hot day, and a drum that has been through a warm loading bay can arrive caked or sintered while the assay still passes. The racemic grade, melting at 60–62 °C, has more headroom but is not immune. Storage conditions belong in the specification for both grades, and the R grade is the one that needs the conversation first. Particle size is a separate line. The R grade is milled to ≥95% through 80 mesh, which gives a finer powder than the racemic grade at 40 mesh: better for a small capsule fill or an even blend, more dust and more static in handling. Granulation is available on request and changes the flow and the sieve result, not the chemistry. Neither the mesh nor the granulation tells the reader anything about the optical form. Solubility is common to both: slightly soluble in water, soluble in ethanol and in fats. That profile suits a capsule, a tablet or an oil-based blend and it does not suit a clear aqueous drink without a solubiliser. Colour is the weakest signal on either sheet. Yellow to pale yellow covers a visible range, and a darker lot can reflect light or heat exposure with an unchanged assay. ## Dose arithmetic across the grades Enantiomeric excess compares the two enantiomers as a share of their total. At 99% ee a lot is roughly 99.5% R with 0.5% S, and a label that declares an R amount depends on that exact figure rather than on the round 99%. The delivered R in a serving is the powder mass multiplied by the assay and by the R share; leaving out either factor overstates the label. Delivered R enantiomer at a declared label amount | Weighed material | Assay | R share | Delivered R | 100 mg racemic alpha-lipoic acid | 99.0–101.0% | About 50% | About 50 mg | 100 mg R-alpha-lipoic acid at 99% ee | 99.0–101.0% | About 99.5% | About 99 mg | 100 mg R-alpha-lipoic acid at 100% ee | 99.0–101.0% | 100% | About 100 mg | 50 mg of R to be declared | 99.0–101.0% | About 50% racemic | Needs about 100 mg racemic The arithmetic is not a dose recommendation. It keeps the panel, the weigh-up and the certificate in agreement, and it explains why a formula converted from racemic to R without a new label check ends up declaring twice the R it used to deliver. An overage is a separate decision for the formulator, supported by the stability file for the finished product. ## What to write into the specification - “R-alpha-lipoic acid, CAS 1200-22-2, C8H14O2S2, molecular weight 206.33.” - “Assay 99.0–101.0% by HPLC, with the basis stated; loss on drying ≤0.5%.” - “Specific rotation +110° to +125° at c = 1 in ethanol, and the chiral result if an ee limit is written.” - “Melting point 46–50 °C; identification by infrared and HPLC.” - “Particle size ≥95% through 80 mesh; heavy metals and microbiology as listed.” - “Optical form and destination market confirmed before the order.” ## When the other grade is the right choice The racemic grade is the right purchase when the label says “alpha-lipoic acid”, the market file covers the racemic ingredient, and no optical claim is being made. It is also the simpler blend component where a fine 80 mesh powder is not needed. It is not a substitute for the R grade behind an R label, because the declared ingredient and the weighed ingredient would differ by roughly half. The R grade is the right purchase when the label names it, when the formula is built on a declared R amount, or when the optical form is part of the product story the brand has chosen. Moving in either direction needs a written change control — a new specification line, a label review, a stability check and a market check — because the two grades carry different CAS numbers. The product hub carries the catalog specification; the racemic grade is on the alpha-lipoic acid product page; the optical evidence is on the identity page; the release lines are on the COA page; the full comparison is on the level-four page. ### 02.1 R-alpha-lipoic acid vs alpha-lipoic acid: the enantiomer, the dose and the label URL: https://nutrition.rainwoodbio.com/products/specialty/r-alpha-lipoic-acid/grades/r-alpha-lipoic-acid-vs-ala/ Reviewed: 2026-11-20 R-alpha-lipoic acid and alpha-lipoic acid are the same molecule in different optical composition: the R grade is a single enantiomer, CAS 1200-22-2, while the racemic grade is a roughly 1:1 mixture of the R and S forms, CAS 1077-28-7. Both have the formula C8H14O2S2 and a molecular weight of 206.33, so an assay, an infrared spectrum or a sulfur figure will not tell the two grades apart. What separates them is the rotation, the melting point, the R content of every milligram and the ingredient name on the label. In one lineThe two names describe one molecule in two optical compositions, so the difference lands on the R content of each milligram and on the ingredient name in the panel, not on the assay. ## One stereocentre, two solids Alpha-lipoic acid has a single stereocentre at the ring carbon that carries the pentanoic acid chain. The R configuration is the (+)-form, with a positive rotation in ethanol, and it is the configuration found in nature; a synthesis that does not control the centre gives both enantiomers in equal amount. The racemic mixture is not a blend of two separate powders in the bag; it is a racemic compound with its own crystal packing, which is why it melts at 60–62 °C while the R grade melts at 46–50 °C. That melting difference is the quickest evidence of the optical form and the easiest to overlook. Infrared and achiral HPLC cannot separate the enantiomers in a solid or in solution, because the connectivity and the functional groups are identical. Only a chiral measurement or a physical property that depends on packing, such as rotation or melting, answers the question. ## Optical purity is a separate line Enantiomeric excess is (R − S) ÷ (R + S) × 100. A lot at 99% ee is about 99.5% R and 0.5% S, not 99% R; a racemic lot is 50:50 and has no net rotation. The R grade therefore needs a positive optical statement on the certificate, while the racemic grade is defined by the absence of one, because both enantiomers are in scope. A grade name without an optical value is a label, not proof. Polarimetry and chiral HPLC answer the same question from different directions: polarimetry reads the net rotation of the sample, and chiral HPLC resolves the two peaks and reports the ratio. The catalog sets the specific rotation at +110° to +125° at c = 1 in ethanol, and the solvent and concentration belong beside the figure. Optical purity and assay move independently, and a lot can pass the assay while the optical line falls, which is the failure mode an R label has to guard against. ## The dose arithmetic that follows A label declares an amount of an ingredient, and the balance has to deliver it. For the racemic grade, only about half of the weighed mass is the R enantiomer; for the R grade at 99% ee, about 99.5% is. The table below makes the arithmetic concrete without recommending any intake. Delivered R enantiomer for a declared label amount | Weighed material | Assay | R share | Delivered R | 100 mg racemic alpha-lipoic acid | 99.0–101.0% | About 50% | About 50 mg | 100 mg R-alpha-lipoic acid at 99% ee | 99.0–101.0% | About 99.5% | About 99 mg | 100 mg R-alpha-lipoic acid at 100% ee | 99.0–101.0% | 100% | About 100 mg | 100 mg of a 50:50 blend sold as R | 99.0–101.0% | About 50% | About 50 mg A formula converted from the racemic grade to the R grade without a new label check delivers roughly twice the R it used to, because the same mass now carries one enantiomer instead of two. The reverse conversion halves it. Neither direction is a unit conversion applied at the balance; it is a label change, and the panel, the weigh-up and the certificate have to move together. ## What the panel has to say On a US label the Supplement Facts panel declares the dietary ingredient, and “R-alpha-lipoic acid” and “alpha-lipoic acid” are two declarations rather than two spellings of one. The seller states the basis it relies on for the R name, and the buyer checks that it reaches the finished product. In the EU and Great Britain the position is not one harmonised entry that covers every member state, and a national file written around the racemic ingredient may not name the R grade. The buyer's regulatory team confirms the route for the destination, as of this review and against the current text. Whatever the market, the rule is the same: the label names the form that was weighed and the form the file covers. A racemic certificate behind an R label leaves the declared ingredient unsupported even when the assay is correct, and an R certificate behind an “alpha-lipoic acid” label overstates the R content by about half. ## Why the category offers both The two grades exist because they answer different product briefs. The racemic grade is the simpler manufacture and the ingredient the wider category has used, and it remains the right purchase where the label and the market file say alpha-lipoic acid. The R grade is the single enantiomer, made by a chiral route or a resolution step, and it is chosen where the label names R, where the declared R amount is the formulation target, or where the product story is built on the optical form. That is a positioning decision, not a health claim, and no disease-related claim is made here for either grade. ## When to choose which Choose the racemic grade when the panel and the market file name alpha-lipoic acid and no optical claim is made. Choose the R grade when the panel names R-alpha-lipoic acid, when the formula is built on a declared R amount, or when the optical form is part of the specification the brand has committed to. A switch in either direction needs a written change control, a new specification line, a label review, a stability check that includes the optical result, and a market check, because the two grades do not share a CAS number. The R-alpha-lipoic acid product page carries the catalog specification; the alpha-lipoic acid product page carries the racemic grade; the grades page places this comparison in the wider range; the identity page gives the tests that separate the forms; the compliance page covers the market file; the COA page shows how the optical line is reported. ### 03 R-alpha-lipoic acid: light, heat and the optical risk URL: https://nutrition.rainwoodbio.com/products/specialty/r-alpha-lipoic-acid/stability/ Reviewed: 2026-11-20 R-alpha-lipoic acid is a low-melting, light- and heat-sensitive solid, and the melting point is what makes its handling unusual: at 46–50 °C the powder is already within reach of warehouse and delivery temperatures, so a warm store can change the physical form before the assay moves. It keeps longest sealed, dark and dry; an alkaline or brightly lit solution is the weakest format. Shelf life is assigned from data for the exact pack and condition. In one lineLight and heat are the two failures the pack controls, and a melting point of 46–50 °C turns a warm store into a chemistry event rather than a housekeeping one. ## The powder: light, heat and moisture Loss on drying is limited to ≤0.5%, a release gate rather than a storage allowance. Open a pouch and the powder starts to take up moisture: the as-is assay drops, the loss on drying climbs and the powder can cake. In practice the storage condition is part of the specification, whether or not the certificate names it. Light comes next. The dithiolane ring is the reactive part of the molecule, and light with oxygen darkens the powder and pulls the assay down. Yellow to pale yellow covers a visible range, so colour is not a test, but a lot that turns brown in the drum has seen light. Keep the material in its original light-resistant pouch or in an opaque container; do not decant it into a clear jar. Heat acts on the physical form before it acts on the chemistry. A solid that melts at 46–50 °C can sinter in a warm warehouse, and a melted lot that sets again may form a glassy mass with a different melting range and different behaviour in a blend. An ambient store is fine for a sealed pack; a loading bay in the sun is not. After cold storage, let the pack come to room temperature before opening it. ## The solution: light, oxygen and pH The material is slightly soluble in water and soluble in ethanol. A solution is the weakest format because light, oxygen, heat and pH act together. In alkaline conditions the dithiolane ring opens, and the R grade can lose optical purity while the assay still reads close to label: the enantiomeric excess falls first, and a product that declares an R amount has a second failure mode to watch. Where a liquid cannot be avoided, shade it, keep the pH on the acid side, hold dissolved oxygen down and prove the hold time before filling. Data on the bulk powder does not transfer to a drink. The matrix, the heat load and the pack each change the rate, and the finished drink has to be measured as a drink. ## What drives degradation Factors that move R-alpha-lipoic acid during storage | Factor | What it does | Control | Light | Darkens the powder; assay falls | Foil or opaque pack; store dark | Heat | Softens, sinters or melts the solid | Controlled store; cool loading | Moisture | Raises loss on drying; caking | Sealed pouch; desiccant if needed | Oxygen | Oxidation at surfaces and in solution | Low headspace; closed pack | Alkaline pH | Ring opening; loss of optical purity | Acid-side matrix; pH check | Metal contact | Colour and degradation in solution | Avoid iron and copper These factors combine. A warm, bright, humid store is worse than any one of them alone, and an alkaline solution in clear glass brings all four together. The question worth asking is in which pack, at which condition, for how long. ## A stability protocol for the ingredient A protocol fixes four things before the first sample goes into the chamber: the pack, the conditions, the time points and the test list. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% cover a warehouse; 40 °C/75% stresses the pack and, for this material, also crosses the melting range, which makes the accelerated arm a physical test as well as a chemical one. A photostability arm covers what a dark cabinet misses. Test assay, rotation or chiral purity, melting point, loss on drying, appearance and micro at every point. The chiral test is the one most often omitted and the one an R label depends on. Ask for the individual results and for a report that names the pack and the lot family. ## The finished formula changes the answer A capsule or tablet starts dry, but the fill sits against excipients that hold moisture, and an alkaline excipient raises the pH at the particle surface. For the R grade, that is a combination to test for optical purity as well as assay. A fine 80 mesh powder also flows differently from a granulated one, and a soft powder can slow a press. A powder blend or an oil-based system takes the material as it is, and the risk moves to mixing heat and to how the finished pack is stored. A stick pack fails at the seal, where one pinhole is enough. None of these formats inherits the shelf life of the bulk pouch, and any overage is the formulator's decision, supported by data on the finished product. ## How the shelf life is set There is no single shelf-life figure for R-alpha-lipoic acid: the pack and the storage condition are what decide it. The retest period on the specification is the number that matters, and behind it sits a stability file for that pack. At the retest period, re-assay the retained sample, optical line included, before extending use. Extending by assumption, or carrying a bulk figure over to a repacked container, is not supported by data. A figure quoted without a pack, a condition and a test panel is not a shelf life. The standard packs are listed on the R-alpha-lipoic acid page; release tests are on the COA page; pack and lead time are on the MOQ page; the assays are described in the methods library; the release workflow is described on the quality page. ### 04 R-alpha-lipoic acid: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/specialty/r-alpha-lipoic-acid/moq/ Reviewed: 2026-11-20 R-alpha-lipoic acid ships from a 1 kg foil pouch, with a 25 kg fiber drum as the production pack, and standard lead time runs 1–7 days. A quotation can be compared only when six details are on it: the optical form and CAS number, the specification with its rotation line, quantity and pack, destination and Incoterm, the document set, and the market and use. In one lineThe minimum is one kilogram because the R grade has to be qualified on three lines at once, assay, rotation and melting point, and a smaller split loses the lot identity that makes those results meaningful. ## Why the minimum is 1 kg One kilogram covers three jobs that cannot be separated: a bench trial, a retained sample and an independent optical test. The optical test is the reason the pack cannot be smaller. A chiral run needs a duplicate preparation, and the retained portion has to come from the same pack as the trial material, so a hundred-gram split would leave the qualification half-finished. Anything below a kilogram is normally taken from a larger lot and repacked. That adds a handling step, breaks the link between the certificate and the powder on the bench, and makes the lot code harder to defend in a dispute. The drum is the production pack: fewer handlings per kilogram, but it ties up inventory for a solid that softens at 46–50 °C. The minimum follows the pack, not a sales target. ## Packs and formats Standard R-alpha-lipoic acid packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial and small batches | Barrier against light and moisture; close it again after use | Fiber drum | 25 kg | Production runs | Lined drum; lot code repeated on the liner | Granulated | On request | Better flow, less dust | The sieve result moves; the molecule does not | Split pack | On request | Bench work only | Repacked from bulk; carries its own handling record The catalog form is an 80 mesh powder, ≥95% through 80 mesh. That is finer than the racemic grade's 40 mesh: an advantage in a small capsule or an even blend, a nuisance in a draughty room. Granulation is a specification line, not a packing preference, so it belongs in the enquiry rather than in a shipping note. ## Lead time and dispatch Dispatch is quoted at 1–7 days after the order is confirmed. Picking, documents and handover to the carrier sit inside that window; transit, customs and the customer's quality release do not. A custom granulation or a non-standard pack moves the date, and the quotation should say by how much. Ask for a dispatch date rather than a range. A pouch usually travels as a parcel and a drum on a pallet, and the Incoterm decides who books the freight and who clears entry. In summer, ask what the route does to a solid that melts at 46–50 °C; a cab in the sun or an apron without shade is a handling event that no certificate will show. Documents should be in the same shipment as the pack. ## What a quotation needs Six details make two quotations comparable: - Product and optical form. R-alpha-lipoic acid, CAS 1200-22-2, spelled out rather than “alpha-lipoic acid”. - Specification. Assay and basis, rotation with solvent and concentration, melting point, loss on drying, mesh, metals and micro. - Quantity and pack. Pouch, drum, granulated or split. - Destination and Incoterm. Country, delivery point and trade term. - Documents. COA, specification, SDS plus the statements the importer needs for its market. - Use and market. Supplement, food or other, and the country of sale. A quotation that omits the optical form is not comparable, because the same order could be filled with racemic powder at the same assay figure. Commercial terms appear on the quotation; this page is not an offer. ## The sample carries a lot code Qualification starts with the 1 kg pouch. Run infrared and HPLC identity, assay, rotation, melting point, loss on drying and micro on it before scaling, and keep part of the same pack as the retained sample. The code on the pouch, the certificate and the quotation should be one code. Without that link the material is a demonstration, not a qualification. A trial that needs less than a kilogram takes a split from a bulk lot. It gets its own handling record, it is not the catalog pouch, and it cannot be presented as one. Ask for the split in writing and keep its code with the trial results; the bench powder and the production drum may come from different lots even when the paper specification is identical. ## Terms to settle before the first order Put the commercial and quality terms on one page: Incoterm, pack, dispatch window, specification revision, a certificate per lot, the retained sample, the retest period and the route for a change. A quality agreement signed before the first production order is easier than the same conversation after a dispute. A failure against the agreed specification is resolved on the retained sample, through a joint re-test against the named method; a photograph of the drum is not evidence. Name the referee laboratory and say who instructs and pays it. A change between the R grade and the racemic grade is a change control in either direction: new CAS number, new label, new market check. The specification is published on the R-alpha-lipoic acid page; the release lines are on the COA page; the market file is on the compliance page; the definition of the term is in the MOQ glossary entry; shipping and documents are covered on the logistics page. ### 05 The regulatory file for R-alpha-lipoic acid URL: https://nutrition.rainwoodbio.com/products/specialty/r-alpha-lipoic-acid/compliance/ Reviewed: 2026-11-20 A compliance file for R-alpha-lipoic acid turns on three facts the certificate cannot supply: which optical form the file covers, where the product will be sold, and the dose in the finished product. The substance has a long record of use in supplements, but the R grade has its own CAS number and its own ingredient name, so a file written for the racemic ingredient does not automatically cover it. The buyer's regulatory team settles the route; this page lists the documents, limits and label questions that belong in the folder. In one lineThe regulatory question for the R grade is not only what the substance is but which optical form the file covers, and that answer belongs to the destination market. ## What the file contains The folder holds four things at once: the specification version for the R grade, the certificate that released the lot, the limits and label rules for the destination, and the record of how source, process and pack changes are handled. The lot certificate covers the batch, the technical data sheet carries the agreed specification and the safety data sheet covers handling; the market route is a separate record. The folder also needs the allergen and GMO statements, the origin record for the manufacturing site, a residual-solvent statement and any customer-specific declaration. A versioned document list at the front saves a search later, and the optical form should appear in the specification title, the certificate and the label rather than only in an email. ## European Union and the United Kingdom No single EU entry can be cited for alpha-lipoic acid in every member state. Food-supplement use sits inside the general framework, while several member states draw their own line between a supplement and a medicinal product by dose, presentation or both, and national practice can diverge from the general labelling rules. As of this review the buyer's regulatory team confirms the member-state position for the exact dose and presentation against the text in force. The EU regulatory notes gather the texts to check. The optical form belongs in that review. A national file written around “alpha-lipoic acid” may not name the R grade, and a label declaring R-alpha-lipoic acid needs a file that names the same ingredient. Great Britain uses its own register and labelling rules; Northern Ireland follows the EU framework. The delivery address decides which applies, and the buyer records that decision with the order. ## United States In the United States the question is how the ingredient is declared in the Supplement Facts panel and whether the basis the seller relies on reaches the R name. Alpha-lipoic acid has a long history of use as a dietary ingredient; R-alpha-lipoic acid is a separate ingredient name, and the supplier states the basis it relies on and the document behind it. The buyer checks that the basis covers the finished product and the claim, and the panel names the form that was weighed. Structure/function wording is reviewed separately, with substantiation and the DSHEA disclaimer. Neither label review nor claim review is part of the certificate, and a claim revision never reopens the specification. ## Contaminants and limits Metals are judged on the finished product, not only on the drum. The figures below are a starting point; the text in force at the destination and the daily dose fix the final limit. Contaminant limits to confirm for the finished product | Parameter | Typical supplement reference | What the file should show | Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method, limit and the calculation at the finished dose | Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception | Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result with its method | Arsenic (As) | Customer or market limit | Agreed limit and method, stated on the certificate ## Label and claims On the label the ingredient appears under the name the file covers: R-alpha-lipoic acid, with the quantity per serving. “Alpha-lipoic acid” is not a summary of the R grade; it names the racemic ingredient, and a panel that swaps the two has changed the product. The certificate supports the material, not the claim, and no disease-related claim is made for this ingredient on this site. Claims are a separate review. The brand's reviewer checks the wording against the product, the optical form and the market, and mechanism language is not an authorisation in the EU or the US. A claim written for the racemic ingredient does not transfer to the R grade, and the reverse holds too. ## Documents for the file The folder needs the certificate with the HPLC assay and its basis, the rotation with solvent and concentration, the melting point, the chiral result where an optical limit is written, loss on drying, the metal panel and the micro count. The specification should name the R grade and the CAS number, and as-is and dried figures are not interchangeable. Add the source and process description, the data sheet, the safety data sheet, allergen and GMO statements, the residual-solvent statement and the origin record. The catalogue specification is on the product page; the analytical evidence for the optical form is on the identity page; the comparison with the racemic grade is on the grades page. ## Checklist before the first order - Specification version, CAS number and optical form are named in one document. - The COA, TDS and SDS sit with the allergen, GMO, origin and residual-solvent statements. - Metals are recalculated to the finished-product dose. - The label names the R grade, not the racemic ingredient. - The destination route and any national classification question are recorded. - Any change of source, process or pack goes through change control. - Quotation, specification and certificate all cite one revision. The quality page describes the release file that sits behind these documents. ### 06 How we prove a lot is R-alpha-lipoic acid URL: https://nutrition.rainwoodbio.com/products/specialty/r-alpha-lipoic-acid/identity/ Reviewed: 2026-11-20 A lot can be called R-alpha-lipoic acid when four results agree: the paper names the R form and CAS 1200-22-2, infrared and HPLC match the reference, the rotation or chiral result shows the R enantiomer, and the melting range with the moisture closes the balance. An assay of 99.0–101.0% cannot do that work alone; it fits the racemic grade, the R grade and every mixture in between. In one lineIdentity here is optical as well as chemical: the chromatogram shows lipoic acid, the rotation shows which enantiomer, and the melting point shows which solid. ## The four identity layers Paperwork can name the right material and still leave the powder unproved. The four layers are separate questions with separate evidence, and an answer to the first alone describes a document rather than a lot. Four layers of R-alpha-lipoic acid identity | Layer | Question | Measurement | Evidence | Document | Which form is declared? | Name, CAS number, formula | Paperwork | Chemistry | Is the molecule lipoic acid? | Infrared and HPLC retention | The molecule, not the enantiomer | Optical form | Is it the R enantiomer? | Polarimetry or chiral HPLC | Enantiomer and purity | Mass balance | Diluted or degraded? | Assay, melting range, moisture, sulfur | Consistency of the numbers ## The rotation and the enantiomer ratio Enantiomeric excess is the difference between the two enantiomers divided by their sum, expressed as a percentage. A lot at 99% ee holds about 99.5% R and 0.5% S; a racemic lot is 50:50. Polarimetry measures the net rotation of the sample, so partial racemisation lowers the reading while the assay stays put; chiral HPLC resolves two peaks and reports the ratio. Either method answers the optical question, and a certificate carrying neither has not addressed it. The catalog sets rotation at +110° to +125° at c = 1 in ethanol. Solvent and concentration belong with the number, because rotation is a property of the solution as measured. A reading near zero is a signal for racemisation or for racemic substitution, and a reading below the window can mean S enrichment. The melting range supports the same conclusion from the solid side. ## X-ray diffraction and the solid state X-ray diffraction asks whether the solid is crystalline and whether the pattern matches a reference. The R enantiomer and the racemic compound pack differently, which is why they melt at 46–50 °C and 60–62 °C, and their patterns differ for the same reason. A pattern that matches the racemic reference is evidence of the racemic grade even when assay and infrared agree. XRD is neither a chiral method nor a purity assay. It answers two useful questions: whether a lot is crystalline or an amorphous dilution, and whether two samples claiming one grade are the same solid form. Before accepting a “match”, ask for the reference pattern and the limit of detection. In a dispute, diffraction plus rotation plus HPLC outranks any one of them alone. ## What adulteration looks like Common R-alpha-lipoic acid substitutions and the signals | Adulterant | What it does | Signal | Test | Racemic grade | Half the R content per milligram | Rotation near zero; melting point 60–62 °C | Polarimetry, chiral HPLC, melting point | S-enriched material | Lowers the R share | Rotation below the window; ee low | Chiral HPLC | Dilution | Lowers the assay and the sulfur figure | Assay low; sulfur below 31.1% | Mass balance, elemental sulfur | Moisture | Raises loss on drying; lowers the as-is assay | Loss on drying above 0.5% | Loss on drying | Other disulfide | Similar colour and retention | Extra peak; spectrum mismatch | HPLC, infrared, high-resolution MS Colour is the weakest evidence. Yellow to pale yellow spans a wide range, and heat or light can darken a genuine lot. The stronger signals are rotation, chiral ratio and melting range, and they are quick to obtain next to the consequences of a rejected production batch. ## How to write the identity into the specification - “R-alpha-lipoic acid, CAS 1200-22-2, C8H14O2S2, molecular weight 206.33.” - “Identification by infrared and HPLC; assay 99.0–101.0% by HPLC with the basis stated.” - “Specific rotation +110° to +125° at c = 1 in ethanol, with the chiral result if an ee limit is written.” - “Melting point 46–50 °C; loss on drying ≤0.5%.” - “Particle size ≥95% through 80 mesh; heavy metals and microbiology as listed.” - “No racemic substitution or dilution above the stated limit; optical form and destination confirmed before the order.” ## Five questions for the supplier - Which optical form is this lot, and which CAS number appears on the certificate? - What rotation was measured, in which solvent and at which concentration? - Will you send the chiral chromatogram or the polarimetry report, not just the assay figure? - What melting range and moisture result were found, and how was the assay basis calculated? - If the lot is challenged, will you join a re-test on the retained sample? Those five answers, in writing, are an identity file. The specification is on the product page; the certificate layout is on the COA page; the racemic comparison is on the racemic product page; the label consequences are on the level-four page; the separations are described in the methods library. ### 01 Reading the COA for oat beta-glucan URL: https://nutrition.rainwoodbio.com/products/specialty/beta-glucan-oat/coa/ Reviewed: 2026-11-20 An oat beta-glucan COA is a chain of three answers: how much beta-glucan the lot contains, on which basis that figure is expressed, and by which enzymatic procedure it was obtained. Around those answers sit the moisture, protein and ash results that make the mass balance readable, and the contaminant and microbiology panels that decide release. The specification in this catalog is the gate; the certificate is the record for one lot. In one lineThe beta-glucan percentage is only the first answer: the cereal enzyme procedure and the as-is or dry basis decide what the number means, and the moisture line decides whether the arithmetic closes. ## The certificate as a test report Begin with the material block. The certificate should name oat beta-glucan, the oat source or fraction and CAS 9012-72-0, because “beta-glucan” alone could be yeast, barley or a blend. The test rows come next, and each row should be readable without a phone call: what was measured, how, and against which limit. Release tests for oat beta-glucan | Test | Procedure | Limit | Appearance | Visual examination | Off-white to light tan powder | Identification | Enzymatic beta-glucan profile against the reference | Conforms | Beta-glucan | Enzymatic cereal method; procedure named | ≥70.0% | Moisture | Gravimetric drying | ≤7.0% | Protein | Nitrogen determination, Kjeldahl or Dumas | ≤5.0% | Ash | Residue after ashing | ≤3.0% | Heavy metals | ICP-MS, element by element | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate counts and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh Two rows deserve a second look. The identification row should say what the identification compared against; “conforms” without a reference is a word. The particle-size row should give the sieve and the percentage through it, because 80 mesh is a handling property that a buyer will notice in the hopper before the laboratory does. ## The enzyme sequence and the assay basis The cereal assay is a sequence, not a single reagent. Lichenase hydrolyses the mixed 1,3/1,4 chain at the 1,4 bond next to a 1,3 link, beta-glucosidase releases glucose from the fragments, and the glucose is measured and multiplied by 0.9 to express the anhydroglucose backbone. The certificate should name the procedure or kit: a cereal method and a yeast cell-wall method use different enzymes, and their percentages are not the same measurement. Then the basis. A result on the powder as received includes the water; a result on the dried solids excludes it. At 6.2% moisture, a 68.0% as-is result becomes 72.5% on the dry basis (68.0 ÷ 0.938). The same powder can be reported as 68.0% or 72.5% depending on the convention, and the catalog's ≥70.0% only has a meaning once the convention is fixed. The mass balance is the sanity check. With 70.0% beta-glucan, 5.0% protein, 5.0% moisture and 2.0% ash, roughly 18% is left for other carbohydrate, lipid and minor fractions. A gap much wider than that asks for an explanation; a gap much narrower asks whether the beta-glucan and moisture were run on the same sample. ## Release limit versus batch result The specification column is a decision rule. The result column is a measurement. When a certificate prints the same range in both, it has restated the rule and told the reader nothing about the lot. The result should carry a unit, the method beside it and, for the beta-glucan line, the basis. What the result column should contain | Test | Limit | Result expected on the COA | Beta-glucan | ≥70.0% by the named enzymatic method | A measured percentage, with the method and the basis | Moisture | ≤7.0% | A measured percentage | Protein | ≤5.0% | A measured percentage and the nitrogen factor | Ash | ≤3.0% | A measured percentage | Heavy metals | Element-specific limits | One figure per element, in mg/kg | Microbiology | Counts and absence statements | The count and the absence finding for the lot Contaminants and microbiology are the rows where a summary is least acceptable. A “metals pass” line does not show which element was near its limit, and a “micro pass” line does not show whether the aerobic count was 100 cfu/g or 900 cfu/g. The numbers are the evidence; the conclusion is the reader's. ## What moves between batches Three parts of the chain move the certificate. The grain moves the starting beta-glucan content, the fractionation and blending move it toward the catalog range, and the dryer and mill move moisture and particle size. A concentrate is designed to absorb the first two, so the lot-to-lot spread is usually narrower than the raw-material spread. Protein and ash are the bran markers: a lot with more bran fraction carries more of both and usually a darker colour. Colour is a weak test but a useful prompt. A darker-than-usual powder should send the reader back to the protein, ash and moisture rows before anyone decides the lot is out of specification. Look at direction over several lots. A beta-glucan figure that creeps toward 70.0%, a moisture figure that creeps toward 7.0% or a particle-size result that drifts below 95% is a process signal, not a single bad day. The lot code links the sheet, the pack and the reference sample; if those three codes disagree, stop there. ## When to order an outside test Outside testing is worth paying for when the supplier's sheet cannot answer the question: a new oat source, a first import, a method that is named but not described, or a result that both sides read differently. The second laboratory should not simply repeat the same panel. Ask for a second enzymatic result with its procedure, moisture, protein and ash, the metals by ICP-MS, microbiology and, where the market requires it, a gluten screen. If the dispute is about the source rather than the amount, add a linkage test. The lichenase digest read by HPAEC-PAD, or a methylation analysis by GC-MS, shows the 1,3/1,4 pattern and the DP3/DP4 ratio that a percentage cannot. Neither belongs in routine release. A detection limit belongs with every “not detected”. Without it, the reader knows the method's sensitivity, not the sample's content. Keep the tested sample sealed and identified by lot; a report without a sample trail is hard to defend. ## What to compare between suppliers Compare six rows: oat source and concentration; beta-glucan result, method and basis; moisture, protein and ash; particle size; gluten and allergen statement; pack and lot code. A pair of 70.0% certificates built on different methods is not a pair of equivalent offers. Then compare the traceability behind the rows: who manufactured the lot, which oat fraction and process were used, and which drying and milling steps followed. The oat beta-glucan product page holds the catalog figures; the identity page covers the linkage evidence; the compliance page covers the market file; the yeast beta-glucan page documents the other source; the methods library and the quality page cover the procedures and release. ### 02 Oat beta-glucan grades: concentration, particle size and the fill URL: https://nutrition.rainwoodbio.com/products/specialty/beta-glucan-oat/grades/ Reviewed: 2026-11-20 Oat beta-glucan is sold as a concentration ladder rather than a single grade: a lower-concentration oat fibre, the ≥70.0% concentrate specified here, and higher-purity fractions. The percentage decides how much powder carries a given beta-glucan mass, and the physical form decides how that powder flows, disperses and fills. The catalog grade on this page is the ≥70.0% powder at 80 mesh. In one lineThe grade is two decisions, not one: the beta-glucan concentration sets the mass per serving, and the particle form sets how the powder behaves in the mixer. ## Why oat beta-glucan has grades Oat grain contains beta-glucan at a few percent, mixed with starch, protein, lipid and bran. A concentrate is made by separating the soluble fibre from the rest, and how far that separation goes is the grade. A 25% oat fibre and a 70% concentrate can both be sold as oat beta-glucan, and they are not interchangeable in a capsule or a drink. The non-beta-glucan fraction is not inert filler. It brings its own protein, starch, colour and water-binding, so a lower grade changes the taste, the flow and the moisture behaviour as well as the mass. A higher grade reduces the carrier per gram of beta-glucan, which matters when the serving is a single capsule or a small stick. ## The concentration bands side by side Oat beta-glucan grades and what changes between them | Grade | Beta-glucan | What the powder carries | Typical use | Oat fibre | About 20–30% | Starch, protein and bran alongside the fibre | Bakery, cereal, bulk fibre | Concentrate | ≥70.0% (catalog) | Protein ≤5.0%, ash ≤3.0%, moisture ≤7.0% | Capsules, sticks, drink mixes | High-purity fraction | Above 80% | A narrower fraction with less carrier per gram | Small capsules, concentrated formats | Granulated concentrate | ≥70.0% on request | The same chemistry at a coarser particle size | Flow and dust control The bands are market descriptions, not a ranking. This catalog specifies the ≥70.0% concentrate; the other rows are here so that a quotation naming them can be read against the same questions. Whatever the band, the specification needs the method, the basis and the particle size beside the percentage. ## Particle size, colour and viscosity The catalog powder is ≥95% through 80 mesh, which is a fine powder of about 177 µm and below. It hydrates quickly, dusts easily and can bridge in a hopper; granulation coarsens it and improves flow without changing the beta-glucan figure. The colour is off-white to light tan, and a concentrate with more bran fraction is usually darker. In water the powder disperses and thickens. Viscosity depends on concentration, molecular weight, particle size, shear and temperature, so a viscosity figure is only meaningful with the solids level and the method stated. A fine powder hydrates faster than a granule, which helps a stick pack and can slow a tablet press. The powder is hygroscopic, and a humid filling room turns a free-flowing lot into a sticky one before the pack is sealed. ## Sizing a serving and a fill Grade arithmetic starts from the beta-glucan figure. At 70.0%, one gram of powder carries 0.70 g of beta-glucan; a 500 mg capsule fill carries 350 mg; to declare 500 mg, the formulator weighs 714 mg of powder. If a formula targets 3 g of beta-glucan, it needs 4.29 g of the 70% powder. None of these figures is a dose recommendation; they are the conversions that keep the label, the fill weight and the assay in agreement. Check the basis before using the factor. If 70.0% is on the dried basis and the powder carries 5.0% moisture, the as-is figure is 66.5%, and the same label claim needs more powder. The certificate, the specification and the label should share one basis, and the conversion should be written into the batch record rather than applied from memory. A lower grade is not wrong for every application. In a bakery or a cereal, the carrier fraction is part of the food and a larger mass may be acceptable; in a small capsule, the carrier mass is the constraint and a higher grade earns its place. The choice is a fit between the serving and the powder, not a preference for a bigger number. ## What to write into the specification - “Oat beta-glucan concentrate, CAS 9012-72-0, (C6H10O5)n, from Avena sativa.” - “Beta-glucan ≥70.0% by the named cereal enzymatic method; state the basis.” - “Protein ≤5.0%; moisture ≤7.0%; ash ≤3.0%.” - “Particle size ≥95% through 80 mesh; granulated on request.” - “Identification by enzymatic beta-glucan profile; heavy metals and microbiology as listed.” - “Oat source, gluten statement and any carrier declared.” Write the grade as a concentration plus a form. “70% powder, 80 mesh” and “70% granulated” are two packs of one chemistry, and the specification should say which one is being bought. The oat versus yeast comparison takes the source question further. ## When a different grade or source fits better When the beta-glucan target is modest and the carrier fraction is acceptable, a lower grade can meet the brief with less processing. When the serving is a single capsule or a small stick, the carrier may not fit and a higher grade is the practical choice. When the label or the market file names yeast beta-glucan, none of these oat grades is a substitute: the source is a different product, with a different linkage and a different claim position. The oat beta-glucan product page carries the catalog specification; the COA page shows how the beta-glucan figure is reported; the compliance page covers the market file; the yeast product is described on the beta-glucan page; the methods library describes the assays; the quality page covers release. ### 02.1 Oat beta-glucan vs yeast beta-glucan: source, structure and the label URL: https://nutrition.rainwoodbio.com/products/specialty/beta-glucan-oat/grades/beta-glucan-oat-vs-yeast/ Reviewed: 2026-11-20 Oat and yeast beta-glucan are both glucose polymers, and that is where the useful similarity ends. Oat is a linear mixed 1,3/1,4 chain from the cereal endosperm; yeast is a branched 1,3/1,6 chain from the cell wall. The difference decides how each behaves in water, which assay measures it, what the label must disclose and which claim entry, if any, can be used. In one lineThe source is the specification: oat gives a soluble mixed 1,3/1,4 fibre that thickens water, yeast gives a branched 1,3/1,6 cell-wall powder that disperses, and the assay, the allergen statement and the claim all follow that difference. ## Where each beta-glucan comes from The two materials begin in different industries. Oat beta-glucan is recovered from the endosperm cell wall of Avena sativa; the oat is milled and fractionated, and the soluble fibre is separated from starch, protein and bran. Yeast beta-glucan is recovered from the cell wall of Saccharomyces cerevisiae; fermentation makes the biomass, and separation, washing and drying make the extract. Neither process is a purification of the other material. The catalog identifiers follow the source: CAS 9012-72-0 for the oat grade and CAS 9041-22-9 for the yeast grade. A specification that gives a percentage but not a source has not identified the product. The oat page and the yeast page hold the two catalog entries. ## The linkage difference Oat beta-glucan is unbranched, with about 30% 1,3 linkages and about 70% 1,4 linkages. The 1,3 links interrupt the 1,4 runs, so the chain does not pack like cellulose and instead dissolves in water. Yeast beta-glucan has a 1,3 backbone with 1,6 branches; the branches make a compact, branched particle rather than a linear chain. The two are different shapes at the molecular level, and the shape is what the formulator feels. What the source changes | Question | Oat beta-glucan | Yeast beta-glucan | Where it comes from | Oat endosperm cell wall | Yeast cell wall | Chain shape | Linear, mixed 1,3/1,4 | Branched 1,3/1,6 | In water | Dissolves and thickens | Disperses and settles | Release assay | Cereal beta-glucan method | Yeast cell-wall method | Label name | Oat beta-glucan | Yeast beta-glucan | Claim position | Oat and barley entries | No inherited oat entry The table is a set of consequences, not a ranking. Each row follows from the linkage and the source; none of them is a quality difference. ## The method decides the number The release assay has to match the polymer. The cereal method uses lichenase, which recognises the 1,4 bond next to a 1,3 link and releases the DP3 and DP4 fragments that characterise the mixed-linkage chain. The yeast method uses a different extraction and enzyme sequence because the branched cell-wall polymer is a different substrate. A 70% oat result and a 70% yeast result are therefore two different measurements, even when both laboratories are competent. Chromatography does not resolve the source on its own. A sugar profile after hydrolysis shows glucose for either material, and a molecular-weight distribution describes size rather than origin. Linkage analysis, by methylation and GC-MS or by NMR, is the test that separates 1,3/1,4 from 1,3/1,6. It is a qualification and dispute tool, not a routine release line. ## Why oat thickens and yeast disperses Oat beta-glucan is the soluble, thickening material. A small concentration raises viscosity, and that viscosity is why it appears in drinks, stick packs and bakery formulas. Yeast beta-glucan is a dispersion: the cell-wall particles absorb water, swell and settle, and a drink needs a dispersion step and often a suspending agent. The mouthfeel and the processing are different, so a direct swap is not a formulation change; it is a new trial. Viscosity is not a purity number. It moves with concentration, molecular weight, particle size, shear and temperature, and it can fall during pumping or heating. A viscosity target belongs in the trial with its solids level and method attached. ## What the label has to say The label has to name the source, because the source is the ingredient. “Oat beta-glucan” and “yeast beta-glucan” are distinct names with distinct specifications; “beta-glucan” alone leaves the buyer and the consumer guessing. In the EU, the claim entries are tied to oat and barley beta-glucan: Regulation (EU) No 1160/2011 uses at least 1 g of oat beta-glucan per quantified portion and a consumer statement tied to 3 g per day, and Regulation (EU) No 432/2012 uses 4 g of beta-glucans from oats or barley per 30 g of available carbohydrate. A yeast 1,3/1,6 ingredient does not inherit either entry. Allergen and gluten disclosure follow the source as well. Oats are listed in Annex II of Regulation (EU) No 1169/2011 as a cereal containing gluten, so an oat ingredient needs the allergen statement and, if a gluten-free claim is made, the controls in Regulation (EU) No 828/2014. Yeast is not a cereal and carries a different source statement. In the US, the soluble-fibre claim at 21 CFR 101.81 is written for a finished food that provides 0.75 g of beta-glucan soluble fibre per reference amount, and the Supplement Facts panel names the ingredient as sold. This site makes no health claim. ## When to choose oat and when to choose yeast Choose oat when the formula needs soluble fibre with viscosity, when the application is a drink, a stick pack or a bakery item, or when the market file is built on the oat entries. Choose yeast when the formula needs a cell-wall powder for a capsule or tablet and the oat claim is not part of the brief. The decision belongs before the label is written, not after the first production run. We supply the oat grade on the oat page; the yeast grade is a separate product on the beta-glucan page. A switch in either direction needs a new specification, a new label and a fresh claim review. The oat grades page covers concentration; the compliance page covers the market file; the methods library and the quality page cover the analytical and release routes. ### 03 Oat beta-glucan stability: moisture, viscosity and the pack URL: https://nutrition.rainwoodbio.com/products/specialty/beta-glucan-oat/stability/ Reviewed: 2026-11-20 Oat beta-glucan has two storage environments to survive: the sealed pack, where the enemy is water vapour, and the finished batch, where the enemies are water, heat, shear and microbes. The powder itself is not fragile; the specification is. Moisture and viscosity are the two numbers that move first, and both belong to the system around the powder as much as to the polymer. In one lineOat beta-glucan is stable as a dry solid; in a formula, its viscosity is the first property to move, so the pack, the water and the process have to be designed as one system. ## In the bag: moisture, lumps and colour A sealed pouch at ≤7.0% moisture is a stable product. An open pouch in a humid room becomes a different product within hours. The powder is hygroscopic, and the first sign is physical rather than chemical: particles stick, bulk density rises, and a powder that flowed through a hopper begins to bridge. The analytical consequence is dilution of the as-is beta-glucan figure and a moisture result that can leave the release gate. Colour is a slower indicator. A concentrate can sit anywhere from off-white to light tan depending on the bran fraction and the dryer, so a small shift is not evidence of a problem. A darker cast after storage usually follows moisture and heat, not light; oat beta-glucan has no strong chromophore and does not need the amber bottle that a photolabile ingredient needs. The store should be dry and steady. A sealed pack tolerates a normal warehouse; it does not tolerate a leaking roof, a concrete floor in a humid climate or a hot vehicle. A pack that has been in a cold store should reach room temperature before it is opened, or the powder will collect condensation. ## In water: viscosity is the specification Oat beta-glucan is a soluble fibre, and in water it thickens. That is the property most formulas want and the property most easily damaged. Heat, shear and time all reduce the viscosity of a hydrated solution, and the loss is not always visible: the liquid may look the same and feel thinner. If viscosity is a functional attribute of the finished product, it belongs in the trial as a measured value, not as an assumption carried over from the powder. Water also changes the microbial picture. A hydrated powder is a food for bacteria, yeasts and moulds, and a pasteurisation step reduces the count while adding heat that affects viscosity. Preservative, pH and hold time have to be validated in the real matrix, because a clean certificate for the powder says nothing about a tank of slurry. ## What moves first Failure modes in oat beta-glucan storage and processing | Variable | First effect | Control | Water | Caking, dilution of the as-is result, microbial growth | Sealed pack; dry store; closed liner | Heat | Colour drift, moisture migration, viscosity loss in a batch | Ambient storage; controlled process temperature | Shear | Lower viscosity after pumping or homogenisation | Fix the process conditions and measure the result | Microbes | Growth in a wet powder or an unpreserved liquid | Dry pack; validated preservation and heat step | pH | Polymer instability at the extremes | Validate the matrix pH and the hold time | Pack damage | A pinhole admits vapour and air | Inspect seams; store off the floor Ranking helps. In the bag, water is first and heat second; in a batch, heat and shear usually beat water. Microbes are a consequence of water and time rather than an independent variable, which is why a dry pack and a validated preservation step solve two different problems. The question to ask is not whether the polymer is stable, but how long this pack or this batch holds this specification. ## The pack is the barrier The 1 kg foil pouch is the trial and small-batch pack. The foil keeps water vapour out; the seal is where it gets in. A pouch that has been opened and rolled over is not resealed in the way a heat-sealed pack is, and the headspace now holds humid air. For a long hold, decant the remainder into a smaller dry container and keep the lot code with it. The 25 kg fiber drum is the bulk pack, and its liner is the moisture barrier rather than the fibre wall. Keep the liner closed, keep the drum off a damp floor and write the opening date on the label. The drum, liner and certificate should carry the same lot code. ## Questions a stability study has to answer A study is a set of questions asked at fixed times. Which pack is being tested, what condition represents the route, when the pulls happen and which tests decide the answer. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% relative humidity represent the warehouse; 40 °C/75% relative humidity stresses the pack. A humidity challenge and a real-process arm are more useful for this material than a light-exposure arm. At each pull, measure beta-glucan by the named procedure, moisture, protein, ash, appearance and microbiology. Add viscosity at a fixed solids level if the material is sold into a liquid. Report the values, not a verdict; a trend across three pulls is more useful than one pass statement, and the report should name the pack and the lot family. Run the study in the pack that will be sold. A pouch and a drum differ in headspace, exposed surface and how often they are opened, so a result from one does not transfer to the other. ## Capsules, sticks, bakery and drinks A capsule shell and a tablet excipient are not dry in the absolute sense, and water can migrate into the fill. Check moisture and caking at release and at the end of storage, and watch tablet hardness if the powder is compressed. A stick pack adds a seal as a failure point: inspect the strip for pinholes, not only the powder. A bakery formula is the most demanding use. The beta-glucan competes with starch and protein for water, and the bake sets the crumb, the colour and the volume. A bakery trial has to measure those attributes, not only the beta-glucan result after baking; a bulk-powder stability study cannot predict them. A drink adds water, pH, heat and microbial risk. Bulk stability is only the starting point; an overage does not repair a leaking pack or an unpreserved batch. ## Where the retest period comes from A shelf-life number without a pack, a condition and a test panel is a marketing statement, not a result. The retest period belongs to a specific pack and a specific storage condition; the supporting file shows the time points and measured values. Change either and the period is re-established, not adjusted by opinion. When the period ends, re-test the retained sample before extending it. A drum's history does not transfer to a pouch repacked later. The oat beta-glucan product page lists the packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the methods library describes the assays; the quality page describes the release workflow. ### 04 Oat beta-glucan: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/specialty/beta-glucan-oat/moq/ Reviewed: 2026-11-20 Oat beta-glucan is quoted from a 1 kg foil pouch; the bulk unit is a 25 kg fiber drum, and the normal dispatch window is 1–7 days from order confirmation. A quotation can only be firm when it names the beta-glucan result with its procedure and basis, the pack, the destination and trade term, the document set and the application. In one lineOne kilogram is the smallest pack that can be certified as a lot: below it, an oat concentrate is repacked, and the COA no longer describes the bag in the buyer's hand. ## Why 1 kg is the floor An order for a new ingredient is usually an order for evidence: enough powder to run a trial, keep a reference sample and send a portion to a second laboratory. A kilogram covers all three and still travels as a parcel. The pack has a lot code and a certificate that belong to it, which is the part a split from a drum cannot offer. Repacking below a kilogram is possible, but it creates a new handling step and a new container with no original identity. The material may be identical; the paperwork is not. At the other end, the 25 kg drum lowers the handling per kilogram and raises the commitment: more inventory, a longer storage period and a larger opening event. The minimum is set by traceability, not by a sales target. ## Packs and formats Two packs are standard, and a third format is a specification change rather than a packing option. Oat beta-glucan packs and what each is for | Pack | Contents | Typical use | Practical note | Foil pouch | 1 kg | Trials, reference samples, small batches | Moisture barrier; close it properly or decant after opening | Fiber drum | 25 kg | Production runs | Liner is the barrier; lot code on drum and liner | Granulated powder | On request | Dust control and flow | Coarser particles; the specification and lead time change The catalog powder passes 80 mesh at ≥95%. That fineness is good for hydration and less good for dust, which is why granulation exists. Ask for it before the quotation, not after the purchase order: a granulated lot is a different particle-size specification and may need a separate run. ## Dispatch, transit and the date that matters The 1–7 day figure covers order confirmation to dispatch. It does not cover the flight or vessel, the customs entry or the buyer's own release. A granulated or otherwise special pack sits outside the standard window, and the quotation should say so in its own line rather than fold it into a range. Ask for the dispatch date and the document date. A parcel with a pouch and a pallet with a drum do not move the same way, and the Incoterm decides who books the movement and who clears it. The certificate, the packing list and the rest of the lot file should be ready when the pack leaves, not emailed after it lands. ## The six details a quotation needs A quotation that omits any of these is a starting point, not an offer: - Material and source. Oat beta-glucan, CAS 9012-72-0, and the oat fraction it comes from. - Result and method. The beta-glucan figure, the enzymatic procedure and the as-is or dry basis. - Pack and quantity. 1 kg pouch, 25 kg drum, or a granulated format. - Destination and trade term. Country, delivery point and Incoterm. - Documents. COA, specification, SDS, allergen and gluten statements, GMO and origin statements. - Application and market. Capsule, stick pack, bakery or drink, and the country where it will be sold. Two quotations for “70% oat beta-glucan” can describe different powders if one states a dry basis and the other an as-is basis. The method and the basis are part of the specification, not a footnote. ## A sample has to be a lot The qualification sample is the 1 kg pouch, not a spoonful from a bulk bag. Test the beta-glucan result, moisture, protein, ash and microbiology, and add a gluten screen where the destination asks for one. Keep part of the same pack sealed as the reference. The lot code on the pouch, the certificate and the quotation should be the same code. If the trial needs less than a kilogram, the remainder is a repack with its own handling record. That is acceptable for a bench experiment, but it is not the catalog pack and should not be presented as one. Record the split, keep its code, and expect the production lot to be a different lot even when the specification reads the same. ## What to agree before the first production order Put the commercial and quality terms in one document: pack, dispatch window, specification revision, certificate per lot, reference sample, retest period and the change-control route. A quality agreement signed before the first order is easier to use than a conversation held after a deviation. Agree the referee route in advance as well. If a result is disputed, the reference sample and a joint test against the named procedure settle more than a photograph of the drum. Name the laboratory both sides accept and the party that carries the test. Appearance alone is a weak basis for a return, because the colour range is broad and a photograph does not measure moisture. Start with the oat beta-glucan product page for the catalog figures, the COA page for the release tests, the compliance page for the market file, the yeast beta-glucan page for the other source, the methods library and the quality page for the analytical and release routes. ### 05 The regulatory file for oat beta-glucan URL: https://nutrition.rainwoodbio.com/products/specialty/beta-glucan-oat/compliance/ Reviewed: 2026-11-20 Oat beta-glucan reaches a market as a cereal-derived food ingredient, so its regulatory file answers two questions: whether the powder is the oat material the specification describes, and whether the destination allows that material and the label the brand wants to use. The first question is analytical and documentary; the second is legal and belongs to the buyer's regulatory team. This page sets out the evidence that has to be in the file before either question can be answered. In one lineOat beta-glucan is regulated as a cereal food ingredient, so the source record, the gluten statement and the oat claim entry have to travel together; a yeast beta-glucan file cannot stand in for any of them. ## Two dossiers, one file The material dossier is the supplier's half: the specification revision, the oat source and fraction, the lot certificate, the method description, the technical and safety data sheets, and the statements on allergens, gluten, GMO, origin and residual solvent. The market dossier is the buyer's half: the destination route, the contaminant calculation, the label and the claim review. The certificate belongs to the first dossier and cannot close the second. The oat source is the hinge between them. A 70% beta-glucan figure does not say whether the powder is a 25% oat fibre or a 70% concentrate, and the source record does. That record should name the oat fraction and the process, because the same percentage can come from different fractions with different protein, ash and gluten profiles. ## European Union In the EU the material is a food ingredient, and the general food law in Regulation (EC) No 178/2002, the labelling rules in Regulation (EU) No 1169/2011 and the contaminant limits in Regulation (EU) 2023/915 form the base. The version of the contaminant regulation in force on the shipment date is the one to use; an older consolidated copy is not a defence. Oats are a traditional cereal with a pre-1997 history, so the grain is not a novel food. A concentrate is a different question: it is assessed on its process and composition, and the novel-food catalogue should be checked for the exact material rather than assumed from the grain. ## United States On the US side the material is sold as a food or a dietary ingredient. A supplement is manufactured under the cGMP rules in 21 CFR 111, and its Supplement Facts panel names the ingredient as sold, including source and quantity. Structure/function statements and health claims are reviewed on separate tracks, and neither review is a certificate function. Oat beta-glucan also sits inside the soluble-fibre health claim at 21 CFR 101.81. That route is for a finished food that supplies 0.75 g of beta-glucan soluble fibre per reference amount and meets the nutrient-profile conditions; it does not attach to a drum of powder. Whether a concentrate sold as a dietary ingredient can use the route is a finished-product question for the buyer's reviewer. ## United Kingdom Great Britain keeps its own register and labelling rules, with the retained versions of Regulation (EU) No 1160/2011 and No 432/2012 as assimilated law. Northern Ireland follows the EU framework. The delivery address, not the buyer's headquarters, decides which register applies, and the decision should be written into the order file. ## Contaminants, fibre and gluten The table below sets the catalog gate against the evidence the dossier should hold. The final limit is a finished-product calculation: the daily dose and the destination text decide it, and the drum result is only an input. Contaminant and quality limits for the finished-product review | Item | Reference | What to keep | Lead (Pb) | ≤3 mg/kg | Lot result, method and dose calculation | Arsenic (As) | ≤2 mg/kg | Lot result and the market or customer limit | Cadmium (Cd) | ≤1 mg/kg | Lot result and the source record | Mercury (Hg) | ≤0.1 mg/kg | Lot result and method | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Counts and absence findings for the lot | Moisture and ash | Moisture ≤7.0%; ash ≤3.0% | Measured figures beside the beta-glucan result | Gluten | ≤20 mg/kg for a gluten-free claim | R5 ELISA result and the oat supply-chain statement Under Regulation (EU) 2023/915 the food-supplement limits are 3.0 mg/kg lead, 1.0 mg/kg cadmium and 0.10 mg/kg mercury. Arsenic is not harmonised for food supplements in the same way, so the market or the customer supplies that figure. A gluten-free claim brings Regulation (EU) No 828/2014 into play: no more than 20 mg/kg gluten, and oats used in the food must be specially produced or processed to avoid contamination by wheat, rye and barley. ## Label and claims Claims are the most source-sensitive part of the file. The EU entries named above are written for oat beta-glucan or for beta-glucans from oats and barley, and a yeast 1,3/1,6 product cannot borrow them by relabelling. The conditions are quantitative and sit on the finished product, so the reviewer needs the recipe, the serving size and the beta-glucan result, not only the specification. Nutrition claims follow a different rule set. “Source of fibre” and “high fibre” depend on the fibre content of the finished food, and the beta-glucan line is one contributor. The ingredient name on the label should be “oat beta-glucan”, because the source is part of what the consumer is buying. Oats appear in Annex II of Regulation (EU) No 1169/2011 as a cereal containing gluten, so the allergen statement and any gluten-free claim are linked decisions. This site publishes specifications and makes no health claim. ## Documents the file needs The minimum dossier is: lot COA with the beta-glucan procedure and basis; moisture, protein, ash and particle size; the metal and microbiology results; the current technical data sheet with its specification revision; the safety data sheet; the oat source record; the allergen and gluten statement; the GMO, origin and residual-solvent statements; and a method description another laboratory could repeat. If a claim is used, add the substantiation and the label review for the destination. Keep the versions in one list at the front of the file, because a certificate that cites an old specification revision is a document-control problem, not a quality result. ## Checklist before the first order - The specification revision, CAS 9012-72-0, oat source and mixed-linkage description are recorded. - The beta-glucan procedure and basis agree across the specification, the COA and the label. - The metal results are converted to the daily dose of the finished product. - The gluten and allergen position is documented for the oat supply chain. - The claim entry and the label have been reviewed for the destination. - The oat source, process and pack are under change control. The oat beta-glucan product page carries the catalog specification; the COA page explains the lot certificate; the identity page covers the analytical evidence; the yeast beta-glucan page is the other source; the EU regulatory notes collect the framework references; the methods library sets out the procedures; the quality page covers release. ### 06 How we prove an oat beta-glucan lot is the mixed-linkage cereal polymer URL: https://nutrition.rainwoodbio.com/products/specialty/beta-glucan-oat/identity/ Reviewed: 2026-11-20 A beta-glucan assay returns glucose, and glucose is the one thing oat, barley, yeast and cellulose share. That is why an oat beta-glucan identity file cannot rest on the percentage alone. It needs four agreeing checks: the oat source and fraction, the named cereal assay, the mixed 1,3/1,4 linkage pattern, and a mass balance that leaves no room for a carrier. In one lineA beta-glucan assay measures glucose, and glucose is the one thing oat, barley, yeast and cellulose have in common; identity needs the source record and the 1,3/1,4 fingerprint beside the percentage. ## Four checks, four different questions Oat beta-glucan identity checks | Check | Question it answers | Evidence | Limit of the evidence | Source | Is the material from oats? | Name, CAS 9012-72-0, oat fraction, supplier audit | Paperwork and process, not the powder | Assay | How much beta-glucan is present? | Cereal enzymatic method with a stated basis | A glucose-based figure, not a source test | Linkage | Is it the mixed 1,3/1,4 polymer? | Lichenase digest or methylation analysis | Structural family, not quantity | Balance | Is it diluted or extended? | Moisture, protein, ash, starch, sugar profile | Consistency, not identity by itself The four are complementary, and none is sufficient alone. A source record without an assay describes a purchase; an assay without a linkage check describes glucose; a linkage check without a mass balance can still miss a blend that carries the right polymer at a lower level. ## The 1,3 to 1,4 linkage ratio The mixed-linkage pattern is the most useful structural fact about oat beta-glucan. The chain is unbranched, and roughly three of every ten linkages are 1,3 while seven are 1,4. That is not a random copolymer: the 1,3 links break up the cellulose-like 1,4 runs, which is why the polymer dissolves and thickens water instead of behaving like cellulose. Lichenase reads that pattern directly. The enzyme cuts the chain where a 1,4 bond follows a 1,3 link and releases two characteristic fragments, one with three sugars and one with four. The ratio of the DP3 fragment to the DP4 fragment is about 1.5–1.7 in oat and about 2.3–2.7 in barley, so the digest is a cereal fingerprint, not just a glucose count. HPAEC-PAD can read the fragments; methylation followed by GC-MS gives the linkage proportions independently. None of this is a routine release test. The catalog states the linkage family; a lot-specific ratio is a qualification tool used when a source is new or a result is contested. Ask for the chromatogram or the linkage table, not for the word “conforms”. ## X-ray diffraction: what it can and cannot show X-ray diffraction is the wrong instrument for the source question, and it is worth knowing that before paying for it. XRD sees crystalline order. A dried oat beta-glucan powder is amorphous, so the expected result is a broad halo with no sharp reflections; the halo says the powder is not crystalline, not that it is oat. The method has one narrow use in this file: detecting a crystalline carrier or filler in a blend. Dextrose, sucrose, lactose or a mineral salt would produce sharp peaks, and that is a formulation question. XRD cannot measure beta-glucan, cannot separate oat from barley, and does not belong in a release specification. If a supplier offers “XRD conforms”, ask what reference was used and what the detection limit was. ## What adulteration looks like Common oat beta-glucan substitutions and the signals | Substitute | What it changes | Signal | Check | Maltodextrin or glucose syrup | Adds soluble solids without beta-glucan | Beta-glucan low; free glucose high | Enzymatic assay and sugar profile | Oat flour or starch | Dilutes the concentrate with alpha-glucan | Starch high; protein and ash shift | Alpha-glucan digestion and iodine test | Barley beta-glucan | Same linkage family, different source | DP3 to DP4 ratio above the oat range | Lichenase digest by HPAEC-PAD | Cellulose | Adds beta-1,4 bulk that the assay may not count | Insoluble residue; recovery changes | Linkage analysis and microscopy | Yeast beta-glucan | Supplies glucose under the same name | Source record inconsistent; 1,6 branches present | Linkage analysis and source audit | Protein or ash filler | Adds mass; shifts the balance | Protein or ash over the limit | Nitrogen determination and ashing | Water | Lowers the as-is result | Moisture high; dry-basis figure normal | Loss on drying Appearance is the least useful check. Off-white to light tan covers a wide range, and a blend can reproduce it. The checks that see structure or the mass balance are the ones worth trusting: the DP3 to DP4 pattern, the starch figure, the sugar profile and the moisture-protein-ash triangle. ## How to write the identity into the specification - “Oat beta-glucan concentrate, CAS 9012-72-0, (C6H10O5)n, from Avena sativa.” - “Beta-glucan ≥70.0% by the named cereal enzymatic method; state the basis.” - “Moisture ≤7.0%; protein ≤5.0%; ash ≤3.0%.” - “Identification by enzymatic beta-glucan profile; mixed 1,3/1,4 linkage stated.” - “Particle size ≥95% through 80 mesh; heavy metals and microbiology as listed.” - “No added maltodextrin, glucose, starch or other carrier unless declared and quantified.” The linkage statement is the line that separates oat from a generic beta-glucan. The COA page shows where each result sits on the certificate. ## Six questions for the supplier - Which oat fraction and which fractionation process produced this lot? - What procedure and kit did the laboratory use, and was the figure calculated on the powder as received or on the dried solids? - Can you provide the lichenase digest or the linkage analysis behind the mixed 1,3/1,4 claim? - What are the moisture, protein and ash results, and how do they close the mass balance? - What is the gluten and allergen position for the oat supply chain? - If the source or linkage is contested, would you join a re-test of the sealed reference sample? Six answers amount to an identity file; one assay percentage does not. The oat beta-glucan product page carries the catalog specification; the grades page compares the concentration bands; the level-four comparison takes the source question further; the yeast product is on the beta-glucan page; the methods library describes the procedures; the quality page covers release. ### 01 What the COA for porcine chondroitin sulfate contains URL: https://nutrition.rainwoodbio.com/products/specialty/chondroitin-sulfate-porcine/coa/ Reviewed: 2026-11-20 The certificate for a porcine chondroitin sulfate lot reports appearance, identification by CPC reaction and HPLC, assay by CPC titration on the dried basis, sulfate, protein, loss on drying, particle size, heavy metals and microbiology. The ranges in the tables below form the catalog specification; the batch COA is the document that confirms a particular drum. The species and tissue statement belongs to the same lot file. In one lineThe porcine source is not an assay line: the certificate has to name the tissue, report the CPC assay on the dried basis, and show the HPLC identity beside the sulfate and protein figures. ## The certificate as a test report A certificate is auditable when each row can be read three ways: what was measured, which method produced the number, and which limit released the lot. A row that says only “conforms” asks the reader to accept a conclusion without the evidence. Identity, assay and composition · porcine chondroitin sulfate | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | CPC reaction and HPLC against a reference | Conforms | Assay, dried basis | CPC titration against a declared standard | 90.0–105.0% | Sulfate | Hydrolysis followed by sulfate determination | 15.0–20.0% | Protein | Colorimetric or nitrogen determination | ≤5.0% | Loss on drying | Gravimetric | ≤10.0% Physical, contaminant and microbiological limits · porcine chondroitin sulfate | Test | Method | Limit | Particle size | Sieve analysis | ≥95% through 80 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent The CPC reaction binds the anionic groups of the glycosaminoglycan and shows that the material behaves as a sulfated polysaccharide; the HPLC result compares the chain profile with a reference. The assay then reports how much of that material the titration finds against the declared standard. ## The dried basis, the sulfate line and the protein The assay is reported on the dried basis. The laboratory measures the powder as received and divides by the dry matter, so a lot at 90.5% as-is with 8.0% loss on drying calculates to 98.4% on the dried basis. A certificate that omits the basis cannot be compared with another supplier's sheet. The 90.0–105.0% window follows from the method. CPC titration converts a charge response into a chondroitin equivalent against a standard, so a lot whose sulfation pattern or chain length differs from the standard can report above 100% without containing 105% chondroitin by mass. The certificate should name the standard and the titration mode. Sulfate and protein are composition lines, not alternative assays. The sulfate result, 15.0–20.0% for this grade, moves with the sulfation pattern of the chains. Protein, ≤5.0%, is residual cartilage protein that survived purification. Neither is chondroitin, and neither can be inferred from the assay percentage. ## Release limit versus batch result The limit is the gate the lot had to pass; the result is what the laboratory found. Both belong on the sheet, in separate columns, with the method named beside them. What the result column should contain · porcine chondroitin sulfate | Parameter | Release limit | Result column | Assay | 90.0–105.0% dried basis | A measured percentage, with the basis and the standard | Sulfate | 15.0–20.0% | A measured percentage and the method | Protein | ≤5.0% | A measured percentage | Loss on drying | ≤10.0% | A measured percentage | Identification | CPC and HPLC conform | The chromatogram and the reference used | Heavy metals | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | A figure per element in mg/kg | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | The count and the absence statement for the lot “Conforms” is a conclusion, and the reader should be able to reach it from the numbers. For heavy metals that means a figure per element, not a sum; for microbiology, a count plus an absence statement. The margin matters too: a lot at 90.3% is inside the window, but three lots at 90.1–90.4% read differently from three lots at 98–101%. ## What moves between batches The starting tissue is the first variable. Cartilage from the trachea and from the nasal septum does not give an identical chain population, and the age and condition of the animals add a second layer. A supplier that buys from more than one abattoir will see the sulfate figure and the protein result move before the assay does. Extraction decides residual protein and low-molecular-weight material; drying decides the loss on drying and can move the colour; milling decides the 80 mesh figure. A change of mill can move the particle-size result without any change in the chemistry. Colour and odour are the least quantitative lines and often the most revealing: a lot that is noticeably darker or carries an odour can point to incomplete washing while the assay still passes. ## When to order an outside test An outside test earns its place with a new source, a first shipment into a regulated market, a certificate that does not trace to a lot, or a contested result. The panel should not simply repeat the certificate: CPC assay against a declared standard, HPLC identity with the chromatogram, sulfate, protein, moisture, ICP-MS metals and the micro counts. Add a species-specific test on the raw material when the species claim is material to the label or to a religious-use review. On a purified polysaccharide the DNA may be too fragmented for a reliable result, so the raw cartilage or the retained in-process sample is the better matrix. Ask for the detection limit with each screen; a “not detected” line without a limit describes the method, not the sample. ## What to compare between suppliers Six lines to compare before two porcine certificates are read as equivalent | Line | Why it changes the reading | What to ask for | Species and tissue | The CAS number is generic and does not name the animal | Porcine trachea or nasal septum, stated in words | Assay standard and mode | The CPC response depends on the reference | Method text, standard, titration mode | HPLC identity | A percentage does not show the chain profile | Chromatogram, column, mobile phase, reference | Sulfate and protein | Composition lines, not assay alternatives | Results and methods, not only limits | Moisture and mesh | Both move with drying and milling | Loss-on-drying result and the sieve cut | Source documents | The assay cannot show species or religious status | Species declaration, religious-use statement, origin The catalog specification sits on the porcine chondroitin sulfate product page. The bovine chondroitin sulfate page carries the other source's specification. The identity page covers the tests that separate chondroitin from other glycosaminoglycans; the market and religious-use file is on the compliance page; the panels are described in the methods index; the release workflow is on the quality page. ### 02 Porcine chondroitin sulfate: choosing the source and the grade URL: https://nutrition.rainwoodbio.com/products/specialty/chondroitin-sulfate-porcine/grades/ Reviewed: 2026-11-20 The catalog grade is porcine chondroitin sulfate: assay 90.0–105.0% by CPC titration on the dried basis, sulfate 15.0–20.0%, protein ≤5.0%, loss on drying ≤10.0% and ≥95% through 80 mesh. Bovine and shark material can meet the same assay window, so the certificate does not choose the source for the buyer. The species, the tissue and the documents that travel with the lot are the grade decision, and they come before the specification lines. In one lineThe species, not the assay, separates this grade from bovine and shark material: porcine carries its own declaration, its own label name and a religious-use position before any specification line is agreed. ## Why the source is the grade Chondroitin sulfate is a family of sulfated glycosaminoglycan chains rather than one molecule with a fixed formula. The chains are extracted from cartilage, and the species and tissue shape the mix of chain lengths and sulfation patterns that reach the powder. Two suppliers can report 96% against the same standard while their powders differ in chain length, residual protein and colour. The species is not visible in the assay. CAS 9007-28-7 covers the family, so a passing CPC result says nothing about whether the cartilage came from a pig, a cow or a shark. The species and tissue have to be written into the specification, the COA review and the source declaration before the lot is approved. The label is the other reason. A brand that names a porcine source cannot move to bovine material without changing the artwork and the customer approval, and in some markets without reopening the religious-use position. The source is a commercial and documentary decision as much as a chemical one. ## Porcine, bovine and shark side by side Three chondroitin sulfate sources · tissue, limits and documents | Attribute | Porcine (this grade) | Bovine | Shark | Starting tissue | Trachea or nasal septum | Tracheal or nasal cartilage | Cartilage from fin or back | Assay window | 90.0–105.0% dried basis | 90.0–105.0% dried basis | 90.0–105.0% dried basis | Protein limit | ≤5.0% | ≤6.0% | ≤5.0% | Animal-source file | Species and tissue declaration; pigs are not a TSE-relevant species | BSE/TSE declaration with origin and SRM-free statement | Species statement; CITES check where the species is listed | Religious use | Not halal and not kosher | Halal or kosher only with a certificate that covers the chain | Fish-derived; the certifier confirms the position | Label name | Porcine chondroitin sulfate | Bovine chondroitin sulfate sodium | Shark chondroitin sulfate The table reports the limits and names carried by the three catalog specifications, not a universal rule. The molecular-weight profile is the line that is easiest to over-read: reported ranges for bovine tracheal material sit around 20–25 kDa and for shark material around 50–80 kDa, while porcine material overlaps the bovine range. A molecular-weight claim should come with the method and the lot value. The salt name needs a check too. The catalog sheet for this grade does not print a sodium line, so the exact label name follows the salt form and the brand's wording and should be agreed in the specification, where the certificate can support it. ## What the powder handles like This grade is a white to off-white, free-flowing powder, ≥95% through 80 mesh. It dissolves in water to a viscous solution, and the viscosity is a handling property rather than a release line. Bulk density and flow vary with milling and moisture, so one source can behave quite differently from another depending on the drying and sieving route. The powder is hygroscopic. A drum opened in a humid room picks up moisture at the surface first, and the loss on drying rises before the assay moves. Colour and odour are useful purification signals: a lot that is noticeably darker or carries a smell usually points to residual protein or a hot drying step, not to a different grade. Granulation is available on request. It changes the particle profile and the flow, so it is a separate specification line rather than a packing choice, and it should be agreed before the capsule or tablet trial. ## Capsules, tablets and powder blends Chondroitin is dosed in grams, so the dosage form sets the fill weight and the number of units per serving. A capsule line needs a free-flowing 80 mesh powder of steady bulk density; a tablet line needs a powder that compacts without picking or sticking, which may call for granulation rather than a finer cut. A powder blend needs a particle size and density close enough to the other components that the blend does not segregate in the hopper. The hygroscopic behaviour belongs in the formula review. A capsule shell and the excipients can move moisture into the fill, and a blend that sits in a hopper picks up moisture from the room. The specification should state the loss-on-drying limit and the storage condition, and the trial should check the powder after storage rather than only at release. A stick pack or a drink mix adds a viscosity constraint: the powder disperses but the mix thickens, so the serving size and the mixing instructions have to be tested together. This grade's catalog applications are capsules, tablets and powder blends; a beverage is a separate development question. ## Writing the source into the specification - “Porcine chondroitin sulfate, CAS 9007-28-7, from porcine cartilage (trachea or nasal septum), country of origin stated.” - “Assay 90.0–105.0%, dried basis, by CPC titration against a declared standard; state the standard and the titration mode.” - “Identification by CPC reaction and HPLC against a reference; keep the chromatogram with the lot file.” - “Sulfate 15.0–20.0%; protein ≤5.0%; loss on drying ≤10.0%.” - “≥95% through 80 mesh; heavy metals and microbiology to the listed limits.” - “Species and tissue declaration, religious-use statement and allergen statement on file for every lot.” ## When porcine is the wrong source Porcine material is not halal and not kosher. A product that has to carry either mark cannot use it, and no certificate converts the source. That is the first exclusion, and it is decided by the market and the customer rather than by the assay. Other exclusions are commercial and documentary. Do not choose porcine when the label or the notified formula names another species, when the customer's supplier approval is built around a bovine or shark file, or when the brand's positioning is animal-free. Even with the same CAS number and assay window, changing source creates a new ingredient file. The product page carries the catalog specification. The porcine versus bovine comparison takes the religious-use and label questions further; the bovine hub carries the other source; the compliance page sets out the file; the quality page describes the release workflow. ### 02.1 Porcine vs bovine chondroitin sulfate: source, label and religious use URL: https://nutrition.rainwoodbio.com/products/specialty/chondroitin-sulfate-porcine/grades/chondroitin-sulfate-porcine-vs-bovine/ Reviewed: 2026-11-20 Porcine and bovine chondroitin sulfate share CAS 9007-28-7 and the same 90.0–105.0% CPC window, so a certificate alone cannot choose between them. The differences are the species and tissue declaration, the BSE/TSE file, the religious-use position and the label. Porcine material is not halal or kosher, and no certificate changes that. In one lineThe assay cannot separate the two species; the porcine declaration, the bovine TSE file and the religious-use position are what a source switch actually changes. ## Two species, one chemical family Chondroitin sulfate is extracted from cartilage. Porcine material comes from the trachea or the nasal septum; bovine material comes from tracheal or nasal cartilage. The chains are built from the same disaccharide units, and the two sources overlap in molecular weight, which is why the same CAS number, the same CPC method and the same assay window can describe both. The species is not a line on the certificate. A CPC assay measures anionic charge, and an HPLC profile compares a chain population with a reference; neither names the animal. The species enters through the source file: the raw material records, the plant, the segregation from other species and the declaration that ties the lot to the tissue. ## Porcine and bovine side by side Porcine and bovine chondroitin sulfate · what a source switch changes | Attribute | Porcine | Bovine | Starting tissue | Trachea or nasal septum | Tracheal or nasal cartilage | Assay window | 90.0–105.0% dried basis | 90.0–105.0% dried basis | Protein limit | ≤5.0% | ≤6.0% | Animal-source file | Species and tissue declaration; pigs are not a TSE-relevant species | BSE/TSE declaration with origin and SRM-free statement | Religious use | Not halal and not kosher | Halal or kosher only with a certificate covering the chain | Label name | Porcine chondroitin sulfate | Bovine chondroitin sulfate sodium The table reports the two catalog specifications. The salt name and any molecular-weight claim should be confirmed in the specification, because the label and the certificate have to describe the same material. ## What the certificate can and cannot show The certificate can show the assay, the HPLC profile, sulfate, protein, moisture and contaminants. It can show that the lot is chondroitin sulfate to the agreed window. It cannot show the species, and a certificate that prints a species line without a source file behind it has printed an assertion. A species-specific test is the direct check. On purified chondroitin the DNA can be fragmented, so the raw cartilage or an in-process sample is the better matrix, and a negative result from the finished powder proves less than it appears to. The practical file combines the declaration, the raw-material traceability and, where the claim is contested, a test on the material where the species signal is still readable. ## The religious-use position Porcine chondroitin sulfate is not halal and not kosher. That is a property of the source. Filtration, precipitation, drying and milling do not change it, and a halal or kosher certificate cannot convert a porcine raw material into a permissible one. A pack that carries either mark cannot contain this material, and a supplier who offers such a certificate for a porcine lot is describing a different product. Bovine material can be halal or kosher, but only with a certificate that covers the slaughter and the whole chain, not just the ingredient name. A certificate on the chondroitin is not a certificate on the finished capsule, and the brand's certifier decides what the pack may say. The practical questions are the label, the market and the consumer. Some destination markets restrict or require a declaration for porcine-derived material, and some customers exclude it by policy. A “porcine-free” claim needs validated cleaning and segregation on the line, not only a statement. The importer's regulatory team and the religious authority confirm the position before the order; this page records it, it does not rule on it. ## What the label has to say Where the source matters to the buyer, the ingredient name should carry the species. In the US the Supplement Facts panel lists the dietary ingredient and the amount per serving; in the EU and the UK the ingredient list carries the name, with the source declaration set by the brand's wording and the destination rules. “Chondroitin sulfate” alone is ambiguous on a pack that makes a source claim. Pork is not on the EU list of 14 allergens or the US list of major food allergens, so the species does not trigger a mandatory allergen emphasis in the way fish does. The material is animal-derived, so a vegan or vegetarian claim is wrong, and a porcine statement may still be needed for the market or the customer. ## What a source switch changes Even with the same CAS number and assay, a source switch creates a new ingredient file. - The species and tissue line on the specification and in the COA review. - The BSE/TSE declaration for bovine material, or the species, origin and ruminant cross-contact statement for porcine material. - The religious-use statement and the customer's acceptance record. - The allergen assessment and the ingredient name on the label. - The stability review, because the chain population and the moisture behaviour can differ. - The retained sample and the change-control record. ## When to choose which Choose porcine when the market and the customer accept a porcine source, when the religious-use position is not a barrier, and when the porcine supply route is the one the project can document. Choose bovine when the product has to be halal or kosher, when the destination excludes porcine material, or when the customer's approval is already built around a bovine file. Choose neither when the label has to be free of animal-derived material, or when the destination cannot document the source. In those cases the answer is a different ingredient, not a certificate with the species left blank. The porcine product page carries this specification; the bovine chondroitin sulfate page carries the other; the grades page sets the comparison in the wider range; the compliance page holds the file; the methods index covers the assay and identity panels; the quality page describes the release workflow. ### 03 Porcine chondroitin sulfate stability: moisture and the pack URL: https://nutrition.rainwoodbio.com/products/specialty/chondroitin-sulfate-porcine/stability/ Reviewed: 2026-11-20 Porcine chondroitin sulfate is hygroscopic, and moisture is the failure mode that matters most for the powder: loss on drying rises, the powder clumps and cakes, and the as-is assay falls while the dried-basis figure holds. A solution adds heat, pH and microbial risk, and its viscosity is part of the quality. The retest period comes from stability data for the exact pack and store, not from the release certificate. In one lineThe powder fails on moisture and the solution fails on heat, pH and microbes; the certificate cannot show either, so the pack and the storage condition set the retest period. ## The powder: moisture, clumping and colour The catalog limit is loss on drying ≤10.0%. That figure is a release gate, not a storage allowance. The powder is hygroscopic, and once the foil pouch or the drum liner is open it draws moisture from the room. The water shows up first at the surface, where it forms clumps and then a cake; the loss on drying rises, and the assay as-is falls even though the chondroitin content has not changed. A lot released at 9.6% has less margin than one at 6.0%. In a humid filling room the difference between those lots is visible within a shift, so the specification and the batch record should carry the storage condition and the filling room should be controlled rather than corrected after the fact. Colour is a second signal. White to off-white covers a wide window, and a shift inside it is not a failure. A lot that darkens or develops a smell after storage is telling you about moisture, residual protein or a warm store, and the answer is the batch record and the retained sample rather than a photograph. After cold storage, let the sealed pack equilibrate to room temperature before opening; otherwise water condenses on the powder and stays inside the pack. ## The solution: viscosity, heat and microbes The powder dissolves in water to a viscous solution. Viscosity is the property that makes the solution useful, and it is also the property that falls first when the chains are degraded by heat, acid or microbial action. A thin solution that was thick at make-up is evidence that something moved. Water activity is the second change. A chondroitin solution is a favourable medium for microorganisms, and a preservative system has to be validated in the matrix rather than borrowed from another product. Hot fill or pasteurisation puts the solution through a heat load the powder never meets, and the hold time before filling is part of the process. pH belongs in the same review. The solution pH moves with residual acid or alkali from the raw material, with the other components of the formula and with any acidulant. A matrix at the edge of the ingredient's comfortable range can lose viscosity and develop an off-note during storage, and the effect is measured in the matrix, not in water. ## What drives the change Factors that move porcine chondroitin sulfate during storage | Factor | What it does | Control | Moisture | Raises loss on drying; clumps and cakes the powder | Sealed foil pouch or lined drum; dry filling room | Heat | Degrades the chains; lowers solution viscosity | Controlled store; cool process; validated hold time | pH | Moves the solution away from its stable range | Validate the matrix pH; buffer or reformulate | Microorganisms | Grow in the aqueous solution; spoil the batch | Preservative challenge; hygiene; water activity control | Compaction | Cakes the powder under load in a warm store | Stack height; pallet position; stock rotation | Oxygen and light | Slow colour change at the surface of an open pack | Keep the pack closed; opaque or foil pack These factors act together. A warm, humid store is worse than the sum of two separate effects, and a solution that is warm, near the edge of its pH range and lightly preserved combines all three. The useful question is not whether the ingredient is stable in general, but whether it is stable in this pack, in this matrix, for this period. ## A stability protocol for the ingredient A protocol fixes the pack, the condition, the time points and the test panel. Warehouse behaviour is covered by long-term storage at 25 °C/60% relative humidity and an intermediate arm at 30 °C/65%; the pack is stressed at 40 °C/75% relative humidity. A solution or a stick pack needs a further arm in the matrix, at the process pH and heat load. At every point, measure assay on the dried basis, loss on drying, appearance, sulfate, protein, HPLC identity and microbiology. Report the numbers rather than a verdict, and identify the pack and the lot family. A final result with no intermediate points cannot show a trend. Request the summary for the pack on the order. A drum and a pouch differ in headspace, surface area and how often they are opened, so one set of data does not describe the other. ## The finished formula changes the answer A capsule or tablet starts with low water activity, but the shell and the excipients can still pass moisture into the fill. Check the loss on drying at release and again after storage, and look at the powder as well as the assay. A tablet that picks up moisture can soften or stick, and the problem appears at the press before it appears on a certificate. A powder blend adds a segregation question. If the chondroitin particles differ in size or density from the other components, the blend separates in the hopper and the serving weight of chondroitin varies. The blend should be tested for content uniformity, not only for the assay of a grab sample. A stick pack fails at the seal as often as at the powder: a pinhole in the foil lets moisture in, and the strip is inspected as well as the fill. A beverage combines heat, pH and microbial risk, and it needs its own shelf life. The ingredient's bulk data is the starting point, not the answer. ## How the shelf life is set No single shelf-life figure is published for this grade, because the pack and the store decide it. The retest period is written on the specification and backed by the stability file for that pack; a figure quoted without a pack, a condition and a test panel is a claim, not a shelf life. Once the retest period ends, re-assay the retained sample before extending use. Extending by assumption, or carrying a bulk figure over to a repack, is not support. The product page lists the standard packs; release tests are on the COA page; pack and lead time are on the MOQ page; the methods index covers assay and micro; the quality page describes the release file. ### 04 Porcine chondroitin sulfate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/specialty/chondroitin-sulfate-porcine/moq/ Reviewed: 2026-11-20 Porcine chondroitin sulfate is supplied from a 1 kg foil pouch, with a 25 kg fiber drum as the bulk pack, and a standard order is dispatched 1–7 days after confirmation. Six details make a quotation firm enough to compare: the species and tissue, the assay basis, the quantity and pack, the destination and Incoterm, the documents, and the market. In one lineOne kilogram is the smallest pack that can be sampled, tested and traced as a porcine lot, and the species declaration travels with it from the first quotation. ## Why the minimum is 1 kg One kilogram is enough for a bench trial, a retained sample and an outside identity test, and it travels as a parcel rather than a pallet. The pack carries a lot code, a COA and a species declaration, so a trial and a production drum can be tied to the same source. A smaller quantity is normally split from a bulk lot and repacked. That adds handling, breaks the original pack identity and makes the lot chain harder to document. At the other end, the 25 kg drum cuts handling per kilogram but ties up inventory in a hygroscopic powder that will sit in storage. The minimum is a packaging limit rather than a sales threshold. A trial that needs 200 g should be drawn as a documented split from a named lot, not bought as a smaller catalogue pack; the split is a repack and needs its own record. ## Packs and formats Standard porcine chondroitin sulfate packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trials and small runs | Heat-sealed; keep closed between uses | Fiber drum | 25 kg | Bulk production | Lined; drum and liner share the lot code | Granulated powder | On request | Dust and flow control | Changes the flow and sieve profile | Custom mesh | On request | Capsule or tablet line | Agreed cut, stated on the COA This grade is an 80 mesh powder: ≥95% through 80 mesh. Granulation or a different mesh is a new specification line, not a packing choice, and it can move the lead time. State the requirement before the quotation so the sieve cut and the flow behaviour are agreed. The pouch's foil does the barrier work, but the seam is where it fails; folding an opened pouch is not the same as the factory heat seal. In the drum, the inner liner is the barrier, and it should be closed again after every withdrawal. ## Lead time and dispatch A standard pack is dispatched 1–7 days after confirmation. The clock covers picking, the document set and handover to the carrier, not the transit, the customs entry or the customer's own release. A granulated or custom-mesh lot needs extra time, which belongs on the quotation as a separate line. Ask for the dispatch date rather than the range. The pouch normally travels as a parcel and the drum on a pallet, and the Incoterm decides who books the freight and clears entry. The COA, the species declaration and the religious-use statement belong in the same shipment as the powder. ## What a quotation needs - Product and source. Porcine chondroitin sulfate, CAS 9007-28-7, with the tissue named: trachea or nasal septum. - Specification. Assay on the dried basis, CPC standard, HPLC identity, sulfate, protein, loss on drying, mesh and contaminants. - Quantity and pack. Pouch, drum, granulated form or a custom sieve cut. - Destination and Incoterm. The delivery country and address, and the trade term that applies. - Documents. COA, TDS, SDS, species and tissue declaration, religious-use statement, allergen and GMO statements. - Intended use and market. Whether the powder goes into a supplement or another application, and the country of sale. A quotation that leaves out the species and the destination is not complete. The same powder can be acceptable in one market and excluded from another, and the religious-use position is part of the offer, not a paper added afterwards. ## The sample is a lot, not a demonstration The 1 kg pack is what a customer qualifies. Run identity, assay on the dried basis, sulfate, protein, moisture and microbiology before scaling up, and retain a portion of that same pack. Sample, COA and quotation should carry one lot code; without it the sample is only a demonstration. A trial needing less than a kilogram is drawn from a bulk lot and repacked. That split carries its own handling record and cannot be documented as the standard pouch, so ask for it in writing and file its lot code with the trial results. The bench powder and the production drum may be different lots even when both meet the specification. ## Terms to settle before the first order Put the commercial and quality terms in one document: Incoterm, pack format, dispatch window, the specification revision, a COA per lot, the retained sample, the retest period, the species declaration, the religious-use statement and the change route. Agree them before the first production order; the same conversation is much harder once a dispute exists. When a lot fails the specification, the evidence is the retained sample and a joint re-test by the named method, not a photograph of the drum. Name the referee laboratory in the agreement. The product page holds the specification; release tests are listed on the COA page; the compliance page covers the market and religious-use file; the MOQ glossary entry explains the term; shipping and documents are on the logistics page. ### 05 The regulatory file for porcine chondroitin sulfate URL: https://nutrition.rainwoodbio.com/products/specialty/chondroitin-sulfate-porcine/compliance/ Reviewed: 2026-11-20 Porcine chondroitin sulfate is an animal-derived food ingredient, and the file has to show the species and tissue, the destination route, the contaminant results, the label and the religious-use position. The catalog specification and the COA describe the powder; the buyer's regulatory team confirms that the finished product may be sold in the destination market. This page lists the checks and the documents that belong in the folder. In one lineThe specification describes the powder; the porcine file has to show the species and tissue, the destination route, the limits, the label and the religious-use position. ## Four checks, one file The file answers four questions: is the ingredient permitted, is the animal source documented, do the contaminants comply, and are the label and claim acceptable. The certificate supports each check, yet the operator that places the product on the market still owns the assessment. The species is part of the first check, not a footnote: CAS 9007-28-7 is the family number and does not name the animal, so “porcine cartilage” belongs in the specification and on the certificate in words. The religious-use position is not a regulation. Halal and kosher are private certification schemes, and a certificate covers a site and a process. That distinction matters here: a porcine source is outside both schemes, and no certificate changes it. The buyer's customer decides whether the ingredient is acceptable; the file records the position. ## European Union Food supplements are harmonised by Directive 2002/46/EC, whose Annex II lists the permitted vitamins, minerals and their forms. Chondroitin sulfate is not on that list, so it sits under general food law and the supplement labelling rules; the operator must still show a lawful and safe use. Regulation (EC) No 999/2001 applies to the animal source. Pigs are not TSE-relevant, so the porcine dossier is smaller than the bovine one, but it still needs the species, the tissue, the origin, a statement that the animals were fit for human consumption, and a ruminant cross-contact statement for the plant. If the line also runs bovine material, add the cleaning and segregation record. As of this review, imports of highly refined chondroitin sulfate are checked against the third-country listing in Regulation (EU) 2021/405. The contaminant ceilings come from Regulation (EU) 2023/915, which for food supplements sets lead at 3.0 mg/kg, cadmium at 1.0 mg/kg and mercury at 0.10 mg/kg; arsenic has no harmonised EU maximum, so it belongs in the buyer's specification. Labelling is governed by Regulation (EU) No 1169/2011 and the supplement particulars. ## United States In the US, chondroitin sulfate sits on the market as a dietary ingredient under DSHEA. There is no pre-market approval of a supplement or its ingredients, but manufacture must follow the dietary supplement cGMP in 21 CFR 111, the label needs a Supplement Facts panel, and the firm is subject to serious adverse-event reporting. The species and source still belong in the supplier file, whether or not the label displays them. A structure/function statement is permitted when it is truthful, substantiated and carries the DSHEA disclaimer; wording that names a disease becomes a drug claim and is outside the route. Proposition 65 adds a state lead threshold in California. Imports add prior notice and foreign supplier verification, and the species declaration is one of the documents most often missing from the first shipment. ## The contaminant and source limits Contaminant and source checks · food supplements | Check | EU | US | UK | Lead | 3.0 mg/kg | No federal maximum; state law may apply | 3.0 mg/kg | Mercury | 0.10 mg/kg | No federal maximum | 0.10 mg/kg | Cadmium | 1.0 mg/kg | No federal maximum | 1.0 mg/kg | Arsenic | Buyer's limit; no harmonised EU maximum | No federal maximum | Buyer's limit; no harmonised maximum | Microbiology | Set by the buyer; HACCP controls | cGMP; buyer's own limit | Buyer's limit; food safety controls | Animal source | Declaration of species, tissue and origin | Species and source records | Retained rules; Northern Ireland follows the EU framework This grade is released against Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg. Lead, cadmium and mercury sit at the EU and UK ceilings; arsenic is a buyer-set figure with no harmonised EU level. A certificate that says only “conforms” cannot be checked against the regulation, so require the per-element results. ## Where the claim boundary sits A disease or symptom claim, or any claim about the course of a disease, is outside every market covered here. The EU and UK admit only claims on the authorised register, and as of this review chondroitin sulfate has no entry. The US allows a substantiated structure/function statement with the DSHEA disclaimer, but not a disease claim. “Porcine chondroitin sulfate” is an ingredient name, not a claim. Wording written for bovine or shark material does not carry over, and neither does a claim assessed for another ingredient. The brand's reviewer checks it against the product, the form and the market; this site publishes the specification and advances no health claim. ## Documents for the file Papers to keep in a porcine chondroitin sulfate file | Document | What it records | When it is required | Batch COA | Results for assay, identity, composition and contaminants | Each lot | Specification and TDS | The agreed ranges and the methods behind them | Before any lot is approved | Species and tissue declaration | Porcine cartilage, trachea or nasal septum, plus origin | Each lot, every market | Religious-use statement | Records that the material is porcine and not halal or kosher | When the customer or market asks | Allergen assessment | Pork is not a listed major allergen; state the animal origin | EU and UK label review | GMO and residual-solvent statements | Process aids and any carrier | New source or customer request | Manufacturing flow and origin | Extraction, purification, drying and milling; export country | New source, audit or import The species and tissue line is the one document that no analytical result can replace. Keep it tied to the lot code, the certificate and the drum, and keep the religious-use statement separate from the specification so that a change in the customer's position does not reopen the release data. ## Before the first shipment - Confirm that COA, label and species declaration all name the same tissue. - Confirm the origin and the fit-for-human-consumption statement, plus the ruminant cross-contact statement if the line also handles bovine material. - Confirm the EU import route for highly refined chondroitin sulfate. - Compare each heavy-metal result with the destination limit, not only with “conforms”. - Confirm the label names porcine where the source matters, and that the religious-use position is recorded. - Test the claim wording against the EU register or the US structure/function rules. - Tie the retained sample to the certificate and the drum by lot code. The catalog specification is on the porcine product page; the lot certificate is explained on the COA page; the analytical evidence is on the identity page; the release file is described on the quality page; the framework references sit in the EU regulatory notes. ### 06 How we prove a lot is porcine chondroitin sulfate URL: https://nutrition.rainwoodbio.com/products/specialty/chondroitin-sulfate-porcine/identity/ Reviewed: 2026-11-20 A porcine chondroitin sulfate lot is identified from four agreeing lines: the species and tissue declaration, the CPC assay on the dried basis, the HPLC profile against a reference, and the sulfate, protein and moisture figures. The assay measures charge-bearing material; it does not name the species. The species claim rests on the source file and, where it is disputed, on a species-specific test of the raw material. In one lineThe CPC assay says how much sulfate-bound material is present; the species declaration, the HPLC profile and the sulfate-to-protein balance say whether it is porcine chondroitin. ## The four identity layers Identity is a conclusion from independent evidence, and each layer answers a different question. Four identity layers · porcine chondroitin sulfate | Layer | Evidence | Question it answers | Source | Species, tissue, origin and lot trail | Does the paperwork name the animal and the tissue? | Assay | CPC titration, dried basis, declared standard | How much charge-bearing material is in the powder? | Chromatography | HPLC profile versus a reference | Does the chain profile match the standard? | Composition | Sulfate, protein, moisture and contaminants | Is the powder wet, diluted or under-purified? Each layer is independent. A true source statement does not stop a diluted powder. A passing assay does not stop a different chromatogram. A clean chromatogram does not stop moisture at the ceiling. Only four agreeing answers close the file. ## Sulfate, protein and the balance between them The sulfate figure for this grade is 15.0–20.0%, and protein is ≤5.0%. Both are composition lines that sit beside the assay, and the pair is a useful consistency check. CPC binds both sulfate and carboxylate groups, so a powder made largely of a less-sulfated glycosaminoglycan can still consume CPC and read inside the assay window while the sulfate figure falls. Protein points the other way. A high protein result at a normal sulfate figure suggests incomplete digestion or washing rather than a different polysaccharide; a low protein result at a normal sulfate figure is one sign that purification did its job. Neither figure is a purity statement, and the balance is not a release calculation. It is a check that the three numbers tell one story. The salt form deserves the same attention. The catalog does not print a sodium line for this grade, so where the label declares a sodium salt, the specification should say so and the certificate should support it. The CPC assay cannot answer that question on its own. ## X-ray diffraction and the solid state Chondroitin sulfate is a hygroscopic polymer, and its powder pattern is a broad halo rather than a set of sharp peaks. XRD therefore cannot identify the material in the way it identifies a crystalline salt, cannot separate chondroitin from dermatan or heparan sulfate, and cannot name the species. A report that says “XRD conforms” without a reference pattern has added little. The method has a narrow role as a screen for crystalline adulterants. Sodium chloride, sugar or a mineral filler shows sharp peaks against the halo, which is useful when dilution is suspected. A low level of an adulterant can sit below the detection limit, so a clean scan is not a clean lot. Ask for the reference and the detection limit before reading a match statement. ## What adulteration looks like Ways a porcine lot can clear one test and still fail identity | Route | Effect on the sheet | Test that exposes it | Other glycosaminoglycans | Dermatan, heparan or hyaluronic material also binds CPC and can stain | HPLC profile plus the sulfate figure against a reference | Low-molecular-weight fraction | The charge response changes with chain length | Declared molecular weight; standard matched to the lot | Salt or sodium chloride | Mass without chondroitin | Dried-basis assay; pH and conductivity | Maltodextrin or sugar | Dilutes the powder and raises moisture | Assay, protein and HPLC; carbohydrate profile | Protein filler | Mass and a raised protein figure | Protein result plus the chromatographic profile | Undeclared species | Same assay, different animal and paperwork | Species-specific raw-material test; source records No single test catches every route. The screen that works combines the assay against a declared standard, the HPLC profile, sulfate and protein, moisture, and a source statement that agrees with the label. Apply it before acceptance, independent of the commercial terms. ## Writing identity into the specification - “Porcine chondroitin sulfate, CAS 9007-28-7, from porcine cartilage (trachea or nasal septum), country of origin stated.” - “Assay 90.0–105.0%, dried basis, by CPC titration against a declared standard.” - “Identify by CPC reaction and HPLC against a reference, and file the chromatogram with the lot.” - “Sulfate 15.0–20.0%; protein ≤5.0%; loss on drying ≤10.0%.” - “≥95% through 80 mesh; heavy metals and microbiology to the listed limits.” - “Species and tissue declaration on file; a species-specific test on the raw material where the source is disputed.” ## Five questions for a supplier - What species and tissue does the lot come from, and where was the raw material sourced? - Which reference standard and titration mode underpin the CPC result, and what chain-length range does that standard represent? - Can the HPLC chromatogram and its reference be released, not just the assay figure? - What are the lot's sulfate, protein and loss-on-drying results, and by which methods were they obtained? - If the species is challenged, will you open the raw-material records and release a retained sample for a species-specific test? The product page holds the specification; the COA page shows where each figure sits; the source page compares the three sources; the bovine hub holds the other source; the methods index covers the chromatographic, contaminant and microbiology panels. ### 01 What the COA for shark chondroitin sulfate actually contains URL: https://nutrition.rainwoodbio.com/products/specialty/chondroitin-sulfate-shark/coa/ Reviewed: 2026-11-20 On a shark chondroitin sulfate lot, the certificate covers appearance, identification by CPC and HPLC, assay by CPC titration on the dried basis, sulfate and protein, loss on drying, heavy metals, microbiology, particle size and the species behind the cartilage. Each line should name its method and release limit, with the measured result in a separate column. The ranges are the catalog specification; the lot COA confirms the drum. In one lineA shark chondroitin certificate is a source document as much as an assay document: the CPC standard, the dried basis, the sulfate and protein figures and the species name have to agree before the percentage means anything. ## What each certificate row should show A certificate can be audited only when each row states the measurement, the method and the limit. “Conforms” on its own asks for trust instead of evidence. The shark grade adds a line a terrestrial grade does not carry: the species. Identity, assay and composition · shark chondroitin sulfate | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | CPC reaction against a reference | Conforms | Identification | HPLC against a reference | Principal peak matches | Assay, dried basis | CPC titration | 90.0–105.0% | Sulfate | Method named on the certificate | 15.0–20.0% | Protein | Colorimetric or nitrogen determination | ≤5.0% | Loss on drying | Gravimetric | ≤10.0% | Particle size | Sieve analysis | ≥95% through 80 mesh The two identification lines ask different questions: the CPC reaction shows a sulfated glycosaminoglycan, and the HPLC comparison shows that the peak pattern matches the chondroitin reference. “Shark” is a category, not a species, so the statement should name the animal. ## The dried basis, the CPC standard and the composition figures Chondroitin sulfate is a mixture of sulfated chains rather than a single molecule, and the assay is reported on the dried basis. The powder holds water, and an as-is figure falls as moisture rises. A lot at 88.0% as-is with 8.0% loss on drying works out at 95.7% dried. CPC titration uses cetylpyridinium chloride, which binds the anionic sulfate and carboxylate groups. The CPC consumed is converted to chondroitin sulfate against a standard, so the number is a charge equivalent, not a mass purity; the standard and titration mode belong beside it. The 90.0–105.0% window is wide because a charge assay responds to sulfation pattern and chain length, and a lot can read above 100% without containing more than 100% chondroitin by mass. Sulfate is specified at 15.0–20.0%, the range expected for a sulfated chondroitin chain, and protein is capped at 5.0% as residual cartilage protein. The protein cap is also not an allergen limit: a low protein result does not settle the fish allergen question, which is a separate assessment. The HPLC line belongs with a chromatogram. A peak at the reference retention time is a start; the spectrum or full peak pattern is the second dimension. If the certificate says only “HPLC conforms”, ask for the column, mobile phase, detection wavelength and standard. A disaccharide-composition run after enzymatic digestion is the stronger test, because it reports the sulfation pattern rather than one retention time. ## The limit and the measured result The limit is the line the lot had to meet; the batch result is the number the laboratory obtained. The two sit in separate columns with the method named. When the result column repeats the specification range, it records the gate rather than the measurement. What the result column should carry · shark chondroitin sulfate | Parameter | Release limit | Result column | Assay | 90.0–105.0% dried basis | The measured value, basis and standard | Sulfate | 15.0–20.0% | The measured figure and the method | Protein | ≤5.0% | The measured figure and the method | Loss on drying | ≤10.0% | The measured value | Heavy metals | Per element | A figure per element in mg/kg | Microbiology | Counts and absence | The count and the absence line Microbiology needs a count and an absence statement, and metals need a figure per element; one combined metals total conceals which element was high. An assay of 90.3% passes, but five lots at 90.2% tell a different story from five lots at 99%. Read the margin, not only the verdict. ## Batch-to-batch variation Species and tissue come first. Cartilage from the fin and from the back need not give the same chain population, and a multi-species supply will show a wider spread in molecular weight, colour and odour. Extraction, purification and drying then move protein, moisture and colour; milling and sieving move particle size without touching the chemistry. Colour and odour are the least quantitative lines and often the most revealing. White to off-white is a wide window, and a lot that arrives grey or yellow, or smells strongly of fish, usually points to residual protein, a warm drying step or a long hold. None is an identity failure alone, but each is a reason to open the batch record before accepting the drum. Watch the direction of travel across lots, not just one value near a limit: assay easing down, sulfate easing down, protein rising, or moisture stuck at the top. The certificate, the pouch, the drum and the retained sample should all show one lot code, and the species statement should be specific to that lot. ## Bringing in an outside laboratory An outside test is worth ordering for a new supplier, an initial shipment, a disputed result or a certificate with no traceable lot. The useful panel is CPC assay against a declared standard, HPLC identity with the chromatogram, sulfate and protein, loss on drying, ICP-MS for the metal panel and the micro absence tests. Add a species test when the paper file does not convince you; DNA barcoding or species-specific PCR answers a question the chemical panel cannot. The report should state the detection limit and the reference standard behind each number. A “not detected” without a limit, or a species call without a reference, tells you about the method rather than the powder. The methods index explains what the contaminant and microbiology panels do and do not prove. ## Comparing two suppliers A like-for-like comparison needs six lines to agree. Assay alone is not enough: a passing percentage can hide a different species, standard, moisture or mesh. Six lines that decide whether two shark chondroitin certificates describe the same powder | Line | What it changes | What to request | Species and tissue | Chain length and sulfation track the species | Species, tissue, origin, lot statement | CPC method | The reference sets the response | Method text, standard, mode of titration | Moisture basis | As-is and dried figures are different numbers | The basis printed on the COA | HPLC identity | Shows whether the pattern is chondroitin | Chromatogram, column, standard | Sulfate and protein | Describe the chain and the cleanup | Results and methods, not limits alone | Species and fisheries file | The assay cannot show species or listing status | Species statement, allergen assessment, permit where listed Put the species line first, because no chemical test on the certificate proves it. Catalog data are on the shark hub; the identity page sets out the species evidence; the compliance page covers the fish allergen and fisheries paperwork; the bovine grade page is the comparison; the quality page explains the release file. ### 02 Shark chondroitin grades: purified powder, granulation and mesh URL: https://nutrition.rainwoodbio.com/products/specialty/chondroitin-sulfate-shark/grades/ Reviewed: 2026-11-20 Shark chondroitin sulfate is supplied as a purified powder specified at 90.0–105.0% by CPC titration on the dried basis, with sulfate at 15.0–20.0%, protein at ≤5.0% and a particle size of ≥95% through 80 mesh; granulated material is available on request. Those figures define the grade. The mesh and the granulation are finishing choices made for the filling line, not a different chemical specification. A milled shark cartilage powder is a separate product and should not be ordered against this description. In one lineThe grade is fixed by three numbers — the CPC assay on the dried basis, the sulfate figure and the protein — before the mesh or the granulation is chosen. ## Why the shark grade is defined by three figures The chondroitin sulfates are a family of sulfated glycosaminoglycan chains, and a shark grade is defined by how much of that family the powder carries and how much cartilage protein is left beside it. The catalog ties three figures together: assay 90.0–105.0% by CPC on the dried basis, sulfate 15.0–20.0%, protein ≤5.0%. They move together. Protein and water can be removed to push the assay up, and a carrier can dilute the powder back below the window. Reading one figure without the other two is how a grade gets misdescribed. Shark cartilage is also sold as a milled cartilage powder. That material contains chondroitin sulfate among other cartilage components and its chondroitin figure is far lower. It has food uses, but it cannot stand in for the purified grade on a capsule label that declares a chondroitin sulfate amount. The word “shark” on an inquiry does not say which of the two is meant. ## The forms and what changes between them Shark chondroitin forms and what changes between them | Form | Chondroitin figure | Composition | Typical use | Purified powder, 80 mesh | 90.0–105.0% CPC, dried basis | Protein ≤5.0%; sulfate 15.0–20.0% | Capsules, tablets, blends | Purified powder, granulated | Same assay window | Same limits; flow and bulk density change | High-speed capsule and tablet lines | Milled shark cartilage | Not this specification; chondroitin is a fraction | Protein and ash much higher | Food uses, not a gram-dose chondroitin | Blend with a carrier | Assay stated on the blend | Carrier changes the label | Low-dose formats The first two rows are the same ingredient at two finishing cuts. The third is a different product and the fourth is a dilution; neither is a grade of the purified powder. A supplier who quotes a “shark chondroitin 90%” should say which row applies. ## Powder, flow and the 80 mesh cut The catalog powder is white to off-white and free-flowing, with ≥95% passing 80 mesh, and it dissolves in water to a viscous solution. The 80 mesh cut is a finishing step: a new mill or sieve can move it with no change to the chemistry. A finer cut disperses faster in a blend but can dust and cake; a coarser cut flows better but may leave a gritty mouthfeel in a stick pack. Bulk density and flow also depend on moisture and on granulation. A powder stored in a humid room before filling will bridge in the hopper even though the certificate is unchanged. Colour and odour are practical checks: a grey or yellow tinge, or a strong fishy smell, points to residual protein or a warm drying step. The catalog has no odour limit, so a sensory check belongs in the incoming inspection. ## Dosage forms and fill Chondroitin is dosed in grams, so the assay determines how much powder goes into each unit. A 90% powder and a 100% powder do not fill the same capsule at the same declared amount, and the difference shows up in capsule size, count per bottle and the cost of the format. Choose the capsule size only after the assay window and the mesh are set, not after the first filling trial. A tablet line needs a powder that compacts without sticking; granulation may be the answer, and it is a separate specification line. A powder blend or stick pack wants a powder that wets out without lumps; residual protein can make the drink foam when it is shaken. None of these choices changes the assay, but each changes the material the line receives. ## What to write into the specification - “Chondroitin sulfate from shark cartilage, CAS 9007-28-7; species and tissue stated on the lot file.” - “CPC assay 90.0–105.0%, measured on the dried basis, with the standard declared.” - “Sulfate 15.0–20.0%; protein ≤5.0%; loss on drying ≤10.0%.” - “Identification by CPC and HPLC conforming to the reference; chromatogram available.” - “Particle size ≥95% through 80 mesh; granulated on request.” - “Heavy metals and microbiology as listed; fish allergen assessment and species statement on file.” We supply the purified shark grade at 80 mesh, granulated on request, with the species statement and the fish allergen assessment issued for the lot. The shark hub lists the catalog data; the COA page shows how the figures are reported; the shark versus bovine comparison covers the source decision; the bovine product page is the terrestrial alternative. ## When a different grade is the wrong purchase If the label names a terrestrial source, or the customer's allergen policy excludes fish, this grade is the wrong purchase even when the assay is higher than the bovine alternative. If the formula needs a cartilage powder rather than a purified chondroitin, the 90% specification is the wrong specification. If the label declares a specific salt form, the certificate has to name that salt, not only “chondroitin sulfate”. A change of source or form starts a new ingredient file. The artwork, the customer's sign-off, the specification, the species statement and the allergen assessment travel as one package. The compliance page sets out the fish allergen and fisheries documents; the identity page covers the tests that separate shark material from another source; the quality page covers release and retention; the methods index explains the assay and contaminant panels. ### 02.1 Shark or bovine chondroitin: source, supply and the label URL: https://nutrition.rainwoodbio.com/products/specialty/chondroitin-sulfate-shark/grades/chondroitin-sulfate-shark-vs-bovine/ Reviewed: 2026-11-20 Both shark and bovine material carry CAS 9007-28-7 and are often written into the same 90.0–105.0% CPC window, but they are separate label ingredients with separate supplier files. Shark material is fish-derived, carries a fish allergen assessment and comes from a fishery by-product stream; bovine material carries a BSE/TSE declaration and a terrestrial supply chain. The source decision comes before the assay comparison, because a certificate that matches on percentage can still fail the label or the customer's policy. In one lineShark and bovine chondroitin share a CAS number and an assay window, so the choice is made on the allergen, the species file, the supply chain and the label, not on the percentage. ## One CAS number, two species The chondroitin sulfates are a family of sulfated glycosaminoglycan chains drawn from cartilage, and the animal and tissue shape the mix of chain lengths that ends up in the powder. Shark material comes from cartilage taken from the fin or the back; bovine material comes from tracheal or nasal cartilage. The extraction and purification steps are similar, which is why the chemical specification can look identical, while the raw tissue and the chain mix differ. Reported average molecular weights differ: shark cartilage chondroitin is often described in the 50–80 kDa range and bovine tracheal material around 20–25 kDa. Those are reported ranges, not constants. Extraction and drying shift the average, and any molecular-weight claim should arrive with the measured figure and the method used to get it. The figure alone does not name the species, since the ranges can overlap. ## Shark and bovine side by side Shark and bovine chondroitin sulfate · what changes with the source | Attribute | Shark | Bovine | Starting tissue | Cartilage from fin or back | Tracheal or nasal cartilage | Reported average molecular weight | Reported around 50–80 kDa | Reported around 20–25 kDa | BSE/TSE file | Not applicable to fish; no BSE/TSE declaration | Species, tissue, origin and an SRM-free statement | Allergen position | Fish-derived; fish allergen assessment and label entry | Animal-derived; not a dairy ingredient | Species and fisheries file | Species and origin statement; CITES and IUU checks where they apply | Species declaration and origin record | Label name | Shark chondroitin sulfate (salt form stated) | Bovine chondroitin sulfate (salt form stated) | Supply base | Fishery by-product; species mix and seasonality matter | Meat-industry by-product; established cartilage stream The two columns can meet the same assay window, the same sulfate window and a similar protein limit. What cannot be copied across is the document pack: the TSE declaration has no meaning for fish, and the fish allergen assessment has no meaning for cattle. ## The supply chain behind the cartilage Shark cartilage is a by-product of a fishery, so the supply depends on what is landed, which species are landed and where. A lot drawn from mixed species will vary more in chain length, colour and smell than a single-species line, and the species statement has to name what is actually in the lot. Some shark species are CITES-listed, and the permit route runs on the exporting authority's timetable rather than the supplier's; an EU import may also need an IUU catch certificate. Both checks belong in the quotation, not in the week before dispatch. Bovine cartilage is a by-product of the meat industry and the supply is generally steadier, but it carries the heavier document file: species, tissue, country of origin, establishment and an SRM-free declaration tied to the lot. Neither source is automatically more available. A buyer who needs a single species, a specific origin or a permit should confirm it before the label is written, because those conditions shrink the pool of lots that can be offered. ## Wording on the label The ingredient name should identify the material and, if the brand chooses to declare it, the animal source. “Chondroitin sulfate” is the chemical name; “shark chondroitin sulfate” or “bovine chondroitin sulfate” is the source-specific name, and the salt form belongs on the label, not only on the certificate. The US panel lists the ingredient and the amount in a serving; in Europe the ingredient list carries the name and whatever source declaration the brand has chosen. The fish entry is the line a shark lot cannot avoid. Regulation (EU) No 1169/2011 requires a declaration for fish and products made from it, and chondroitin sulfate is not one of the exempted derivatives. In the US, fish is a major food allergen under FALCPA and has to be declared by its common name. A label that names the species but omits the allergen is incomplete, and a label that carries the allergen but not the species may not match the customer's specification. ## The fish allergen question The protein limit is not an allergen limit. A lot at ≤5.0% protein has less cartilage protein than a poorly purified lot, but the specification does not establish that the fish allergen risk is absent, and the certificate does not carry an allergen result. The assessment belongs to the finished product and the market: the operator documents the risk, decides whether the label entry is required, and checks the wording with the brand's reviewer. Cross-contact on the line is part of the same assessment. For a customer whose allergen policy excludes fish, the answer is the bovine source, not a shark lot with a low protein figure. For a customer who wants shark material, the allergen entry is a labelling fact to be managed, not a reason to avoid the source. The two positions are commercial and regulatory, and they should be settled before the specification is written. ## What changes with the source Changing the source starts a new ingredient file, even where the CAS number and the assay have not moved. The specification, the COA review, the species statement, the allergen assessment, the artwork and the customer's sign-off are one package, and the stability file needs a fresh look because chain length and moisture behaviour can shift with the source. The assay certificate alone does not authorise the switch. Choose shark when the label or the customer calls for a fish-derived ingredient, when the species and fisheries file can be completed for the destination, and when the allergen entry fits the product. Choose bovine when a terrestrial source is required, when the TSE paperwork can be traced to the lot, or when the customer's allergen policy excludes fish. The assay percentage does not make either choice. The shark hub holds the catalog data; the bovine product page is the alternative; the grades page shows where this comparison sits among the shark forms; the compliance page covers the market file; the identity page covers the species evidence; the methods index covers the assays; the quality page covers release. ### 03 Shark chondroitin sulfate: moisture, odour and the pack URL: https://nutrition.rainwoodbio.com/products/specialty/chondroitin-sulfate-shark/stability/ Reviewed: 2026-11-20 Shark chondroitin sulfate is hygroscopic: it takes water from the air, its loss on drying climbs towards the 10.0% ceiling, and the powder begins to clump and bridge before the dried-basis assay moves. Heat and light add colour and odour drift. Moisture is the variable that opens the door, and the pack, the liner and the closing procedure decide how long a lot stays inside its specification. In one lineWater is the variable that matters: a shark chondroitin lot stays in specification only while the liner, the pouch and the closing procedure keep moisture out. ## The dry powder: moisture, clumping and odour The chains carry sulfate and carboxylate groups with a counter-ion, and water binds across the surface and between particles. Left open, the powder settles into equilibrium with the room, and a humid room can push it past the 10.0% loss-on-drying limit even though the lot was released below it. The limit is a boundary, not a goal: at 6.0% the powder carries more dry matter and more headroom than at 9.5%. Flow is the first visible sign. Powder that poured freely on release begins to arch in the hopper and then to form lumps that will not break up in a blend. The dried-basis assay may still pass while each kilogram of as-is material carries less chondroitin, because water is not chondroitin. Moisture is stopped by the drum's inner liner rather than the fiber; a liner that tears or a pouch left open is how a lot that passed release ends up out of specification. Odour is the second signal. A clean, low-odour powder that turns fishy in storage has probably taken up moisture and held it warm, and the residual protein is the part that changes first. The catalog sets no odour limit, so the sensory check belongs in the incoming inspection and in the stability protocol. ## The solution and the liquid format Dissolved in water, the powder gives a viscous liquid, and a liquid format raises two questions the solid does not: whether the chains hold up through heat and pH over the shelf life, and whether the water lets microbes grow. This catalog does not set a pH specification for the shark grade, so a liquid project has to establish its own pH window and hold time rather than borrow one from another grade. A ready-to-drink line adds heat through pasteurisation or hot fill, while a stick pack dodges that step because the water is added by the consumer. If a liquid or gel is unavoidable, the study has to be run in the finished matrix, preservative and package included. Data from the powder does not describe a liquid, and data from a liquid does not describe a capsule. ## What drives the change What moves a shark chondroitin lot in storage | Factor | Effect | Control | Moisture | Clumping; more water; less dry matter per kilogram | Lined pack, desiccant, closed transfer | Heat | Colour and odour drift; faster moisture damage | Cool store; short heat exposure | Light | Surface colour change in an open pack | Opaque pack; keep it closed | Oxygen | Odour and colour change where moisture is present | Small headspace; reseal at once | Metal ions | Complexes and shifts colour | Stainless steel contact; metals panel | Compaction | Hard caking under weight in a drum | Agreed stack height; liner in place The factors work together: damp powder in a warm room is where colour, odour and flow fail at once, and a humid filling room can undo a good pack in a shift. Keep the pack dry first, then control temperature, then light and oxygen. ## A stability protocol for the shark grade Begin with at least three lots, one of them released close to the top of the moisture range, and put each into the commercial pack rather than a laboratory bag. A pouch and a lined drum are different barriers and have to be studied as sold. Hold the packs at 25 °C/60% relative humidity for long-term data, 30 °C/65% for an intermediate set and 40 °C/75% for accelerated data, with points at 0, 3, 6, 9, 12 and 24 months long term and 0, 3 and 6 months accelerated. At every point test appearance, odour, assay on the dried basis, sulfate, protein, loss on drying, HPLC identity and the microbiological panel, and note pack integrity and net weight. Fix the acceptance criteria before the first result arrives; a value outside them says something about the pack or the process; it is not a cue to redraw the limits. ## Formula and pack together In a capsule the fill and the shell exchange water: a gelatin shell can give or take moisture, and a hygroscopic fill can leave the capsule brittle or tacky, while an HPMC shell behaves differently. Study the intended shell and fill weight. In a tablet, binders, disintegrants and lubricants bring their own moisture and compaction behaviour, and a granulated grade may flow better than a milled powder but adds a process step. In a stick pack the laminate and the seal are the barrier, and a pinhole fails sooner than the same powder in a pouch. The 1 kg pouch is the trial and small-batch pack; the 25 kg drum with its liner is the production pack. Desiccant and nitrogen flushing are options to be ordered and studied, not assumed at the filling line, and the humidity of the filling room belongs in the handling instructions. ## How the shelf life is assigned No single shelf-life figure applies across the packs. The retest period sits in the specification and rests on data generated in that pack. Without the pack, the storage condition and the test panel, a number is not a shelf life, just an assertion the data has not earned. When the retest period ends, re-assay the retained sample before extending the period, and do not transfer a bulk figure to a repacked container. Once a 25 kg drum has been opened, it is no longer the pack the data describes. The shark hub lists the packs; the COA page sets out the moisture and assay lines the study follows; the ordering page covers pack sizes; the bovine page is the other source; the methods index covers the assay; the quality page sets out the release file. ### 04 Shark chondroitin sulfate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/specialty/chondroitin-sulfate-shark/moq/ Reviewed: 2026-11-20 The minimum order for shark chondroitin sulfate is 1 kg in a foil pouch, and the bulk pack is a 25 kg fiber drum; the catalog lead time is 1–7 days from order confirmation. The shark source makes the small pack more than a convenience. The 1 kg unit is what carries the species statement, the COA and the retained sample through a buyer's qualification, so the trial and the production drum can be compared on paper and on the bench. In one lineOne kilogram is the smallest shark chondroitin order because the species statement, the COA and the retained sample have to travel with the material. ## Why the floor is one kilogram A kilogram covers the identity and assay work, the sulfate and protein checks, an independent species test if the buyer wants one, a trial batch and a retained portion. It is also light enough to travel as a parcel, which helps when the production plan is still open and only a small quantity is needed. The pouch is a traced pack with its own lot code, not a hand-filled bag. A smaller quantity has to be cut from a bigger lot and put into a fresh container. Handling goes up, the original pack identity is lost, and tracing the species statement back to the source lot gets harder, while the powder itself is unchanged. The 25 kg drum cuts handling per kilogram but ties up inventory for longer. The minimum is about how the pack is traced, not about pushing a buyer to order more. ## Pack formats and labelling Standard packs for shark chondroitin sulfate | Pack | Build | Net weight | Use | Foil pouch | Foil laminate, heat-sealed | 1 kg | Trial, qualification sample, retention | Fiber drum | Fiber drum, lined | 25 kg | Production and repeat ordering | Granulated powder | Same packs, different finishing cut | 1 kg or 25 kg | Flow and dust control on the line Moisture is held back by the inner liner rather than the fiber wall. The pack label should name the product, the shark source, the lot code, the net weight and storage advice, and that lot code must match the certificate. A desiccant, a nitrogen flush or a particular liner is an option to be ordered and studied, not something the filling line can assume. ## Lead time and the dispatch date A released lot in the standard pack is quoted at 1–7 days. The window opens once the order, the specification and the document set are agreed, not when the first message lands. An inquiry that states the grade, mesh, quantity and destination can be priced and scheduled in one pass; one that leaves them open has to wait. Two things can stretch the window. A non-standard mesh, granulation or customer pack has to be made or re-packed, and a fresh COA has to be written against the new specification. A CITES permit, where the species is listed, comes from the exporting authority on its own timetable, and the standard lead time should not be assumed until that route is confirmed. Quote the dispatch date and the expected arrival date separately. ## Six details for a quotation An offer can be compared only if it describes the same powder. The six details below are the minimum for a like-for-like check. Six details for a shark chondroitin quotation | Detail | What to specify | Why it matters | Product and source | Chondroitin sulfate, shark cartilage; species and tissue if fixed | The source drives the file, the label and the allergen assessment | Grade and mesh | 90.0–105.0% CPC, 80 mesh; granulated if needed | Capsule fill and tablet flow follow from it | Quantity and pack | 1 kg pouch or 25 kg drum; how many of each | The pack is what the stability data covers | Destination and Incoterm | Country, port or door, plus the trade term | The destination decides the documents and who books freight | Documents | COA, TDS, species statement, fish allergen assessment, permit where listed | The file has to satisfy the market and the customer's audit | Handling | Desiccant, nitrogen, liner, own label | Pack options move the specification and the schedule An offer that skips these questions is an offer for a powder nobody has defined. Commercial terms are not published on this page; they are stated in the quotation. ## The sample carries a lot code The 1 kg pouch is the qualification sample. Before scaling, check identity, assay, sulfate, protein, moisture and microbiology, and hold back a portion from that pack under the production storage condition. If the species matters, send the retained sample for DNA barcoding or species-specific PCR and compare the result with the species statement. The sample, the COA and the offer have to carry the same lot code. A bench trial that needs only a few hundred grams is a split, not the catalog pouch. The material comes out of a bulk lot, gets a separate handling record and cannot be shown as the 1 kg foil pouch. Get the split confirmed in writing and record its lot code alongside the trial results; the bench powder and the production drum need not share a lot even though the specification matches. ## Order terms to fix in advance The offer and the order confirmation should carry the commercial and quality terms together: Incoterm, pack, quantity, dispatch window, specification revision, a COA per lot, a retained sample, a retest period, the species statement, the fish allergen assessment and the change route. Wrap them into a quality agreement ahead of the first production order; the conversation is harder once a dispute exists. When a lot misses the agreed specification, the evidence comes from the retained sample and a joint re-test by the named method, not from a photograph of the drum. The agreement should name the referee laboratory, say who pays for it, and set out what happens if the species statement and the lot do not agree. The shark hub has the catalog data; the COA page lists what was released; the compliance page covers the market file; the bovine page is the terrestrial alternative; the methods index describes the assays; the quality page covers the release workflow. ### 05 The regulatory file for shark chondroitin sulfate URL: https://nutrition.rainwoodbio.com/products/specialty/chondroitin-sulfate-shark/compliance/ Reviewed: 2026-11-20 Shark chondroitin sulfate reaches the market as a food supplement ingredient in Europe and as a dietary ingredient in the United States, and the shark source adds two questions to the chondroitin file: the species and fisheries paperwork behind the cartilage, and the fish allergen entry on the label. The chemical specification, the contaminant results, the label wording and the claim are separate checks. The operator putting the finished product on the market owns the assessment; this page lists the material that belongs in the file. In one lineThe shark source adds two checks to the chondroitin file — the species and fisheries paperwork, and the fish allergen entry on the label. ## The checks behind the file The file has to answer five questions: whether the ingredient is permitted in the market, whether the cartilage came from a lawful and declared species, whether the contaminant results meet the limit at the finished-product dose, whether the label declares what the rules require, and whether the claim is allowed. A supplier certificate feeds those answers; it does not make the decision. Chondroitin sulfate is neither a vitamin nor a mineral, so the EU list of permitted vitamin and mineral forms is not the route. General food law and the supplement rules apply, and the buyer's regulatory team confirms the position for the finished product. ## European Union Directive 2002/46/EC sets the EU food-supplement framework, and its Annex II lists the permitted vitamin and mineral forms. Chondroitin sulfate is not on that list, so the product is placed under general food law with the supplement labelling rules. Regulation (EC) No 1169/2011, Annex II, names fish and fish products among the allergens to be declared. Chondroitin sulfate from shark cartilage is not an exempted fish derivative, so the fish entry applies, and the operator confirms how it appears in the ingredient list. Animal by-product and TSE rules sit in Regulation (EC) No 999/2001, which is written around ruminant material; fish are not a TSE-relevant species, so the shark lot does not carry a BSE/TSE declaration. It does carry a species and origin statement. Imports of fishery material may also need a catch certificate under the IUU Regulation (EC) No 1005/2008, and a permit under Regulation (EC) No 338/97 where the species is CITES-listed; the importer checks both routes as of this review. Contaminants follow Regulation (EU) 2023/915. Claims sit under Regulation (EC) No 1924/2006, with the permitted wordings collected in Regulation (EU) No 432/2012. At the time of this review the EU register has no entry for chondroitin sulfate, so a generic joint wording is not available for this ingredient. ## United States In the US, shark chondroitin sulfate is marketed as a dietary ingredient under DSHEA. FDA does not clear the ingredient before sale, but the finished product has to follow the dietary supplement cGMP in 21 CFR 111, carry a Supplement Facts panel and meet the serious adverse-event reporting duties that apply to the firm. The supplier file has to name the species and the source, whether or not the panel does. Fish is a major food allergen under FALCPA, and the label has to declare it by its common name. Shark is a fish, so a shark-derived chondroitin is in scope; the operator confirms the wording with the brand's label reviewer. A structure/function statement needs substantiation and the DSHEA disclaimer, and a statement that names a disease is a drug claim. Imports add prior notice and foreign supplier verification, and the Seafood Import Monitoring Program covers sharks among its species groups as of this review, so the importer checks whether the entry is in scope. ## United Kingdom Great Britain uses its own supplement and labelling rules and the GB register; Northern Ireland follows the EU framework, including the fish allergen entry. Which of the two applies follows the delivery address, and that decision is filed with the order. The retained EU contaminants and TSE rules are checked on their own terms rather than assumed to match the EU text. ## Limits to confirm Contaminant and source checks · food supplements | Check | EU | US | UK | Lead | 3.0 mg/kg | No federal limit; state law may apply | 3.0 mg/kg | Cadmium | 1.0 mg/kg | No federal limit | 1.0 mg/kg | Mercury | 0.10 mg/kg | No federal limit | 0.10 mg/kg | Arsenic | No harmonised limit; buyer specification | No federal limit | No harmonised limit; buyer specification | Fish allergen | Mandatory declaration, Annex II | Major allergen, FALCPA | Mandatory declaration | Species and fisheries file | Species statement; IUU and CITES check | Species file; SIMP check | Species statement; import check This grade is catalogued at Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg, within the EU and UK ceilings; arsenic has no harmonised EU limit here and stays a buyer-set line. The contaminant result is a drum figure, so the file should show the calculation at the finished-product dose: a compliant powder can still exceed a limit when the daily portion is large. ## Where the claim boundary sits A disease claim is closed in every market covered here. In the EU and UK only register claims are open, and the register has no chondroitin entry at the time of this review; the US allows a structure/function statement with substantiation and the disclaimer, but not a disease claim. A statement about how the body works is still a claim and needs support of its own, and wording assessed for a different source or salt does not transfer to shark chondroitin. The label needs the ingredient, the amount per portion, the salt form, the source and the fish allergen declaration. This site publishes specifications, not health claims; the fish entry is a labelling fact. ## Documents in the file Documents a shark chondroitin file should contain | Document | What it shows | When it is needed | Batch COA | Assay, identity, sulfate, protein, moisture, contaminants, micro | Every lot | Specification / TDS | Release ranges and their methods | Every supplier qualification | Species and origin statement | Shark species, tissue, country of origin, lot link | Every lot | Fish allergen assessment | Protein-derived allergen risk and label wording | Every shark lot; label review | CITES permit | Legal movement where the species is listed | Listed species; import | IUU catch certificate | Lawful fishery origin, where the route requires it | EU import check | Manufacturing flow and solvents | Extraction, purification, drying, milling | New source; audit ## Before the first order ships - Make sure the COA, the label and the species statement name the same species and tissue. - Complete the fish allergen assessment and reflect it in the ingredient list. - Check the CITES status of the species and the IUU catch-certificate route for the destination. - Compare the individual heavy-metal results with the limit at the finished-product dose. - Confirm that the claim wording is supported by the EU register or by US structure/function rules. - Hold back a retained sample whose lot code matches the certificate and the drum. Catalog data sit on the shark hub; the COA page works through the lot certificate; the source comparison sets out the label consequences. The EU regulatory notes list the framework texts; the bovine page is the other source; the methods index covers the assays; the quality page covers the release file. ### 06 How we prove a chondroitin lot came from shark URL: https://nutrition.rainwoodbio.com/products/specialty/chondroitin-sulfate-shark/identity/ Reviewed: 2026-11-20 A shark chondroitin lot is identified in two directions at once. The chemical side asks whether the powder is chondroitin sulfate: a CPC assay against a declared standard, an HPLC identity against a reference, and the sulfate, protein and moisture figures that describe the chain population. The source side asks whether the cartilage came from shark. Neither question is answered by the assay percentage, and a certificate that reports only that percentage has answered neither fully. In one lineIdentity has two questions here: whether the powder is chondroitin sulfate, and whether the cartilage came from shark; the assay answers neither on its own. ## The identity layers Each layer answers a different question and needs its own evidence. An answer that stops at the source document describes a file, not a bag of powder. Identity layers for shark chondroitin sulfate | Layer | Question | Evidence | What it proves | Source document | Is the species named and traceable? | Species, tissue, origin and lot statement | Documentation only | Charge assay | How much sulfated material is present? | CPC titration on the dried basis | A charge equivalent, not a purity | Chromatography | Is the peak pattern chondroitin? | HPLC against a reference standard | The molecular family | Composition | Is the powder diluted or protein-rich? | Sulfate, protein and loss on drying | Consistency of the numbers | Species test | Did the cartilage come from shark? | DNA barcoding or species-specific PCR | The animal source The species test is the layer most often missing. A species statement is a declaration by the supplier; a DNA result on the retained sample is evidence about the lot. The two are complementary, and a buyer who needs the label to say shark should ask for both. ## Reading the charge and composition figures together CPC titration is a charge measurement. Cetylpyridinium chloride binds the anionic sulfate and carboxylate groups, and the amount consumed is converted to chondroitin sulfate against a standard. The response moves with the number of anionic sites on each chain and with chain length, which is why the standard and the titration mode belong on the certificate. Two laboratories can report different percentages for the same powder if the references differ. The sulfate figure is the other half of the charge picture. At 15.0–20.0%, it sits where a sulfated chondroitin chain is expected, and it moves with the sulfation pattern of the source. A lot that passes the CPC assay while sulfate sits at the bottom of the window, or below it, deserves a second look: the assay counts charge, and the sulfate figure says how much of that charge is sulfate. Protein is the third figure. It is capped at 5.0%, and a result near the cap with a high assay points to a powder that was concentrated on chondroitin but not fully cleaned up. A low protein result with a normal sulfate figure is the pattern of a clean lot. Taken as a set, assay, sulfate and protein are harder to fake than any one of them, because a dilution or a substitution moves at least one of the others. ## What XRD can and cannot show The polymer is hygroscopic and does not form a sharp crystalline pattern, so an X-ray diffraction scan shows a broad halo instead of reference peaks. XRD cannot tell chondroitin apart from dermatan or heparan sulfate, cannot read the sulfation pattern that the CPC assay responds to, and cannot reveal a low-molecular-weight fraction. Its only useful job here is spotting a crystalline filler such as sodium chloride, whose sharp reflections stand out from the halo; at a low level the filler can still escape detection. Ask for the pattern and the reference before accepting a “match” statement. In a disputed lot, the useful combination is the CPC assay, the HPLC chromatogram, the sulfate and protein results and a species test, not an XRD line on its own. ## Routes of substitution Common shark chondroitin substitutions and the signals | Route | What it does to the certificate | Signal and test | Other glycosaminoglycans | Dermatan or heparan material titrates and stains | HPLC pattern; sulfate figure; electrophoresis | Low-molecular-weight fraction | The response changes with chain length | Stated molecular weight; a matched standard | Salt or sodium chloride | Adds weight, not chondroitin | Dried-basis assay; ash; conductivity | Maltodextrin or sugar | Dilutes the powder; moisture rises | Assay, protein, HPLC; sugar profile | Protein filler | Adds bulk; the protein figure rises | Protein result; HPLC pattern | Undeclared species | Passing assay, wrong animal and file | Species statement; DNA barcoding or PCR | Unpurified shark cartilage | Lower chondroitin content per gram | Assay, protein, ash; solubility None of these is caught by a single measurement. Screen with the CPC assay against a declared standard, the HPLC pattern, sulfate, protein and moisture, then add a species check against the label. Colour is the weakest signal: white to off-white covers a wide range, and a powder can be the right colour and still be the wrong material. ## The identity block in the specification - “Shark-cartilage chondroitin sulfate, CAS 9007-28-7; species, tissue and origin named on the lot file.” - “Assay target 90.0–105.0% by CPC, on the dried basis; standard and mode named.” - “Composition targets: sulfate 15.0–20.0%, protein ≤5.0%, moisture ≤10.0%.” - “Identification by CPC and HPLC against a reference; chromatogram and spectrum available.” - “Species confirmed by DNA barcoding or species-specific PCR where the label names shark.” - “No other glycosaminoglycan above the agreed limit; ash and conductivity as agreed.” ## Questions to put to the supplier - Which shark species and which tissue does this lot come from, and is the statement issued for the lot? - What standard and titration mode did the CPC assay use, and what molecular-weight range does that standard cover? - Please send the HPLC chromatogram with the sulfate and protein results, not just the assay figure. - Has the lot been tested for species, and which method and reference database were used? - If we dispute the lot, will you join a re-test on the retained sample? Those five answers, taken together, are the identity file; a single assay figure is not. The shark hub holds the catalog data; the COA page maps each figure; the grades page compares the forms; the compliance page covers the fish allergen file; the methods index explains the assay and chromatographic methods; the bovine page is the other source; the quality page covers release. ### 01 What a coenzyme Q10 certificate reports, and what it leaves to the method URL: https://nutrition.rainwoodbio.com/products/specialty/coenzyme-q10/coa/ Reviewed: 2026-11-20 The certificate for a coenzyme Q10 lot reports appearance, identification by HPLC and UV, assay by HPLC at 275 nm on the anhydrous basis, melting point, loss on drying, the heavy-metal panel, microbiology and particle size. The catalog limits are the release gates; the batch results are what the laboratory measured on that lot. The certificate becomes auditable only when each row carries its method, its basis and its own result. In one lineA CoQ10 assay is a percentage of ubiquinone on the anhydrous basis; the melting point, the loss on drying and the related-substance profile are what make that percentage auditable. ## The certificate as a test report A certificate answers several questions at once. Appearance describes the powder, identification says the peak is the right quinone, assay says how much is there, and melting point and loss on drying describe the solid. A row that reduces any of this to “conforms” has replaced evidence with a conclusion. The catalog sets 98.0–101.0% by HPLC on the anhydrous basis, with a melting point of 48–52 °C and loss on drying at ≤1.0%. Those are limits, not results; the lot certificate reports the measured value against each gate. Identity, assay and release limits · coenzyme Q10 | Parameter | Method | Catalog limit | Appearance | Visual | Yellow to orange-yellow powder | Identification | HPLC retention and UV spectrum | Conforms to the reference | Assay (anhydrous basis) | HPLC with UV detection at 275 nm | 98.0–101.0% | Melting point | Capillary or equivalent | 48–52 °C | Loss on drying | Gravimetric | ≤1.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh Identification and assay are separate questions. The identification row decides whether the material is ubiquinone rather than ubiquinol, a different quinone or a diluted powder; the assay row decides how much is present. A percentage cannot answer the first one. ## Anhydrous basis, water and the melting point Coenzyme Q10 is assayed on the anhydrous basis. The laboratory weighs the powder as received, measures the loss on drying, and calculates on the dry matter. A lot that reads 98.6% as weighed with 0.6% loss on drying calculates to 99.2% anhydrous; the same powder can look different on two certificates, and neither is wrong. The basis belongs in the assay row, not a footnote, and the loss on drying belongs beside it as a measured figure. A result close to the 1.0% limit leaves less room for moisture pickup, and it lowers the as-is assay even when the anhydrous figure is unchanged. Loss on drying and water by Karl Fischer are not the same test. A pharmacopoeial monograph for ubidecarenone can set a water limit tighter than the catalog's loss-on-drying limit, because the methods capture different material; a lot that meets the catalog can still miss the monograph. If the destination file cites a pharmacopoeia, put the method and the limit side by side. The assay method should name the column, mobile phase, wavelength and standard. A typical pharmacopoeial separation uses a C18 column, a methanol and alcohol mobile phase, about 35 °C and UV detection at 275 nm. The catalog method is HPLC; the certificate should show a defined method, not a generic “HPLC” label. Identification has more than one accepted form. HPLC retention plus the UV spectrum is the catalog requirement; a pharmacopoeial file may also ask for infrared absorption and the blue colour reaction with dimethyl malonate and alkali. Those tests support the same identity from different angles, but the reader should know which one was run. ## Release limit versus batch result A release limit is the boundary the lot must meet; a batch result is the measurement on that lot. The certificate needs both, in separate columns, with the method named. A result column filled with the specification range is not a result; it is a second copy of the gate. What the result column should contain for a coenzyme Q10 lot | Parameter | Release limit | Result column | Assay | 98.0–101.0% anhydrous | A measured percentage, with the basis and the method | Melting point | 48–52 °C | The measured range or onset | Loss on drying | ≤1.0% | A measured percentage | Related substances | Agreed individual and total limits | The named peaks, their relative retention and the total | Heavy metals | Per element | A measured figure in mg/kg for each element For related substances, name what was bounded. Coenzymes Q7, Q8, Q9 and Q11 are homologues with different side-chain lengths; the (2Z)-isomer is a geometric isomer. A total-impurity figure without individual peaks hides which one is present, and the peaks are what separate a fermentation change from a light-exposure event. ## What moves between batches Fermentation and crystallisation move the colour, assay and trace-homologue profile; drying moves the loss on drying; milling and sieving move the particle-size result without changing the chemistry. The melting point can shift within 48–52 °C with crystal form and purity, so a value at the edge deserves a look rather than automatic rejection. Light and heat can change a lot after release. Exposure can raise the (2Z)-isomer and other related substances while the assay falls only slightly, so a chromatogram that was clean at release and shows a new shoulder after storage is telling a story about the pack. A trend across lots is more informative than one result near a limit: assay drifting low, loss on drying climbing or a growing Q9 peak. The lot code on the certificate should match the pouch, the drum and the retained sample. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a disputed form, or a lot stored in uncertain conditions. The useful panel is HPLC assay with the related-substance chromatogram, UV and infrared identity, melting point, loss on drying or water by Karl Fischer, ICP-MS and microbiology. Add a redox check when the question is ubiquinone versus ubiquinol. A single 275 nm assay calibrated for ubiquinone does not report the reduced form, and a “total CoQ10” result after oxidation measures the sum rather than the form. Name the standard, wavelength and sample preparation. Ask for the detection limit behind every “not detected” line; a screen that cannot see 0.1% cannot support an absence claim. The report should identify the lot and the pack. ## What to compare between suppliers Put seven lines side by side: form and CAS; assay result and basis; identification tests run; melting point and loss on drying; related substances with named peaks; heavy metals and microbiology; pack size and lot code. Two quotes that agree on assay but differ on form or basis are not describing the same powder. The second layer is traceability: who manufactured the lot, which fermentation or isolation route was used, and which drying and milling steps were applied. The catalog specification sits on the coenzyme Q10 product page. The tests that separate ubiquinone from ubiquinol are on the identity page; the presentation options are on the grades page; the method notes are collected under methods; the release workflow is described on the quality page. ### 02 CoQ10 grades: the powder, the oil suspension and the form question URL: https://nutrition.rainwoodbio.com/products/specialty/coenzyme-q10/grades/ Reviewed: 2026-11-20 Coenzyme Q10 is supplied as ubiquinone in several physical presentations: a crystalline powder milled to 80 mesh, a granulated powder and an oil suspension. The grade changes particle size, flow and carrier; it does not change the molecule, the CAS number or the assay basis. Ubiquinol is a different product, not a grade of this one. In one lineThe grade of coenzyme Q10 is a presentation decision — particle size, carrier and flow — while the form decision is ubiquinone or ubiquinol, a different product. ## Why one molecule arrives in several presentations Ubiquinone is a lipophilic crystalline solid with a melting range of 48–52 °C. The native powder has a low bulk density, is prone to static and is not especially free-flowing, which matters on a tableting line or in a premix. Milling controls the particle size, but it cannot fix flow on its own; granulation can. A softgel fill needs the material dispersed in oil rather than as a dry powder. A stick pack or a beverage concentrate needs a dispersion that behaves in water, which the native powder does not provide. Those are presentation decisions, and each one changes the specification in a different place. Granulation moves particle size and bulk density. An oil suspension adds a carrier, a concentration and a carrier specification. A water-dispersible grade adds an emulsifier or a carrier and changes the assay per gram of the finished powder. None of them changes the identity of the ubiquinone. “Grade” is also used loosely to mean assay. In this catalog the assay range is fixed at 98.0–101.0% by HPLC on the anhydrous basis. A 50% dilution is not a lower grade of the same product; it is a different specification with a carrier, a different assay per gram and a different label declaration. ## The presentations side by side Coenzyme Q10 presentations and what each one changes | Presentation | What it is | What changes | Typical use | Native powder, 80 mesh | Crystalline ubiquinone, milled | Baseline particle size; dust and static remain | Capsules, tablets, dry premix | Granulated powder | Agglomerated ubiquinone | Flow, bulk density, dust and dispersion | High-speed tableting, premix | Oil suspension | Ubiquinone dispersed in a vegetable oil | Carrier, concentration, viscosity and settling | Softgel fill, oil-based blend | Water-dispersible powder | Ubiquinone on a carrier with an emulsifier | Dispersion in water, assay per gram, label | Stick packs, beverage mixes The catalog supplies the 80 mesh powder as standard and an oil suspension on request. Granulation and water-dispersible forms are separate specifications: they need their own carrier, assay per gram, particle-size method and stability data. A quotation that says only “granulated” has not yet said what the granule is made of. The table deliberately leaves ubiquinol out. Ubiquinol is the reduced form, with its own CAS number, assay, colour and stability profile. It is compared with ubiquinone on the level-four page, not on a grade list. ## Melting point, flow and the process The melting range of 48–52 °C is not a remote laboratory number. A process that brings the powder surface to 50 °C is at the melting range, not merely warm. Softgel drying, tablet compression and any warming step used to disperse the powder in oil should be reviewed against that range. Melting and re-solidifying can change the crystal form, the bulk density and the flow, even when the assay is unchanged. Particle size is specified as ≥95% through 80 mesh. That is a ceiling, not a target: a powder can meet it and still flow poorly if the fines dominate. Granulation is the usual answer when flow is the problem. An oil suspension replaces flow with viscosity and settling, so the specification moves to the carrier, the solids load and the resuspension test. All presentations are light-sensitive. A clear jar on a bench is the wrong container, and a transparent softgel still needs an opaque pack for storage. ## Assay arithmetic and the dosage form The label dose and the weigh-up have to agree. At 99.0% assay on the anhydrous basis and 0.6% loss on drying, the powder as weighed is 98.4% ubiquinone. A label that declares 100 mg of coenzyme Q10 therefore needs 101.6 mg of powder. The arithmetic is not a recommended intake; it is the conversion that keeps the label and the batch record consistent. An oil suspension adds a second conversion. If the suspension contains 20% ubiquinone by mass, a 100 mg label dose needs 500 mg of suspension. The carrier is not inert for the label: it has to be declared, and its own specification, peroxide value and storage condition belong in the file. A suspension that settles in the drum needs a resuspension step before filling, and that step belongs in the process description. A water-dispersible powder is specified by the assay of the premix, not by the assay of the ubiquinone inside it. A 20% premix delivers 20 mg of ubiquinone per 100 mg of powder; the label, the weigh-up and the COA all have to use the premix figure. The dosage form decides which presentation is practical. A hard capsule takes the native or granulated powder. A softgel takes the oil suspension. A stick pack takes a water-dispersible grade or a carefully stabilised emulsion. A tablet takes a granulated powder with a particle size and flow that suit the press. ## What to write into the specification - “Ubiquinone (coenzyme Q10), CAS 303-98-0, C59H90O4, oxidised form.” - “Assay 98.0–101.0% by HPLC on the anhydrous basis; loss on drying ≤1.0%.” - “Melting point 48–52 °C; identification by HPLC retention and UV spectrum.” - “Particle size ≥95% through 80 mesh; appearance yellow to orange-yellow powder.” - “Oil suspension: carrier, ubiquinone concentration, viscosity and resuspension test.” - “Granulated or water-dispersible grade: carrier, assay per gram, particle size and dispersion test.” - “Light-resistant pack, lot code and a COA for each lot.” Write the presentation into the product name as well as the specification. “Coenzyme Q10 98%” does not say whether the buyer is receiving a powder, a granule or an oil suspension, and the three do not substitute for one another at the weighing step. ## When this grade is the wrong choice If the label names ubiquinol, ubiquinone is the wrong product, whatever the assay says. If the formula needs a transparent aqueous drink, the native powder will not deliver it; a water-dispersible grade or an emulsion is a separate development project. If the capsule is small and the label dose is large, the low bulk density of the native powder may not fit, and granulation changes the volume without changing the dose. The reverse is also true. A granulated or water-dispersible grade should not be ordered as a substitute for the native powder without checking the carrier, the assay per gram and the label. The carrier is part of the product, and it brings its own allergen, GMO and stability questions. Catalog data is on the coenzyme Q10 product page; the comparison with the reduced form is on the ubiquinol product page and the level-four page; the release tests are on the COA page; the pack and lead time are on the MOQ page. ### 02.1 Coenzyme Q10 vs ubiquinol: the oxidised and reduced forms URL: https://nutrition.rainwoodbio.com/products/specialty/coenzyme-q10/grades/coenzyme-q10-vs-ubiquinol/ Reviewed: 2026-11-20 Ubiquinone and ubiquinol are the oxidised and reduced forms of coenzyme Q10. They differ by two electrons and two protons — C59H90O4 at 863.34 against C59H92O4 at 865.36 — so the mass difference is 2.02 units, about 0.23%. The practical difference is not the mass: it is the colour, the stability in air and light, the assay and the name on the label. In one lineThe two forms are one redox step apart — two electrons and two protons, 2.02 mass units — and that step decides the colour, the stability and the name on the label. ## One redox step, two materials Coenzyme Q10 has a benzoquinone head and a side chain of ten isoprene units. In ubiquinone the head carries two carbonyl groups; reduction turns them into two hydroxyl groups and gives ubiquinol. The side chain is unchanged, which is why the two materials are both lipophilic, both insoluble in water and both easy to confuse on a bench. The pair is not a grade ladder. Ubiquinol is not a purer or stronger version of ubiquinone, and ubiquinone is not an earlier stage of the same specification. Each has its own CAS number, assay, stability profile and label name. A purchase order that says “CoQ10” has not chosen between them. The mass difference is small enough to be ignored in a weighing room and large enough to matter on a label that declares the form. Two hydrogen atoms are 2.02 mass units, 0.23% of the molecule. That is a rounding difference, not a licence to substitute one form for the other. ## The two catalog materials side by side Ubiquinone (oxidised) and ubiquinol (reduced) | Property | Ubiquinone (coenzyme Q10) | Ubiquinol | CAS number | 303-98-0 | 992-78-9 | Formula | C59H90O4 | C59H92O4 | Molecular weight | 863.34 | 865.36 | Redox state | Oxidised | Reduced | Appearance | Yellow to orange-yellow powder | White to pale yellow powder or oil | Catalog assay | 98.0–101.0% by HPLC | ≥95.0% by HPLC | Counter-form limit | No numeric limit in the catalog; ubiquinol by an agreed redox method | Ubiquinone ≤2.0% | Solubility | Insoluble in water; soluble in fats and organic solvents | Insoluble in water; soluble in fats and organic solvents | Label name | Coenzyme Q10, ubiquinone or ubidecarenone | Ubiquinol or reduced coenzyme Q10 The table separates two materials that share a name stem and most of their structure. It is not a conversion chart, and the two rows for the counter-form limit are not symmetrical: the ubiquinol specification carries a numeric ubiquinone ceiling because oxidation is its main failure route, while a ubiquinone lot has no numeric ubiquinol limit in the catalog and needs an agreed redox method if the form is in question. ## The assay has to name the form and the wavelength Ubiquinone is read by HPLC with UV detection at 275 nm and assayed on the anhydrous basis against a ubidecarenone standard. The catalog range is 98.0–101.0%. The same chromatographic run can carry the related-substance method, which bounds coenzymes Q7, Q8, Q9 and Q11 and the (2Z)-isomer. Ubiquinol is a different assay. The reduced form absorbs at a different wavelength and has its own standard, and the specification sets ≥95.0% with ubiquinone ≤2.0%. Sample preparation matters: the material oxidises in air and light, so a sample left open on a bench can lose reduced content before it reaches the injector. A 275 nm assay calibrated for ubiquinone will not report ubiquinol correctly without its own standard and method. “Total CoQ10” is a third figure. It is obtained by oxidising the sample and measuring the sum, which is useful for a total-content check but destroys the information about the form. A buyer who needs to know whether the powder is ubiquinone or ubiquinol needs the two-form method, not the total. ## The reduced form is the one that changes in storage Ubiquinone is already fully oxidised, so it does not convert to ubiquinol in storage. Its failure routes are light-driven isomerisation and related-substance formation, plus heat near its 48–52 °C melting range. The powder is stable enough for a sealed, light-resistant pack, but a clear jar and a warm shelf are still the wrong environment. Ubiquinol has the opposite problem: oxygen takes it back to ubiquinone. Light and heat accelerate the reaction, and the ubiquinone limit of ≤2.0% is the specification's way of bounding it. That is why ubiquinol is supplied as a powder or an oil and why the pack needs an oxygen barrier; a nitrogen-flushed, opaque container is not the same starting point as a clear bottle. Both forms need a light-resistant, sealed pack and a cool store. The difference is that ubiquinone's pack is mainly a light and moisture barrier, while ubiquinol's pack is also an oxygen barrier. A stability file written for one form does not describe the other. ## The label and the mass arithmetic The label has to name the form. In the EU and the US, “coenzyme Q10” is usually read as ubiquinone, but “usually” is not a specification. Write “ubiquinone” or “ubidecarenone” when that is the material, and “ubiquinol” or “reduced coenzyme Q10” when the reduced form is intended. A label that says only “CoQ10” leaves the form to the reader. The mass conversion is nearly one to one. Multiply a ubiquinol quantity by 863.34 ÷ 865.36 = 0.9977 to express it as ubiquinone equivalent. A 100 mg ubiquinol label dose is 99.77 mg of ubiquinone equivalent; a 100 mg ubiquinone dose is 100.23 mg of ubiquinol. The numbers are close because the redox change is two hydrogen atoms, not a salt or an ester. That arithmetic keeps a label and a weigh-up consistent; it does not make the forms interchangeable. The regulatory file, the stability data and the label name all follow the form, and a switch in either direction needs a change control, a new certificate and a fresh label review. The reduced form's market status is its own question and should not be inferred from the ubiquinone history. ## When to choose which Choose ubiquinone when the label, the specification and the market file name the oxidised form. It is the catalog powder, it has the defined 98.0–101.0% assay range and the long supplement history, and it suits capsules, tablets and oil suspensions. This is the form the coenzyme Q10 page supplies. Choose ubiquinol when the label names the reduced form and the pack, the process and the market file are built around it. It is not a drop-in for the powder: the colour, the assay, the oxidation limit and the oxygen barrier all change. A formulator who wants to switch should approach it as a new ingredient rather than a new supplier. Neither form is defined by a health claim on this site. The chemistry, the specification and the label are the subject here. Catalog data is on the coenzyme Q10 product page and the ubiquinol product page; the presentation choices are on the grades page; the separation is described in the HPLC method note; the release file is on the quality page. ### 03 CoQ10 stability: light, heat and the pack that keeps the quinone intact URL: https://nutrition.rainwoodbio.com/products/specialty/coenzyme-q10/stability/ Reviewed: 2026-11-20 Coenzyme Q10 is a lipophilic crystalline solid with a melting range of 48–52 °C. In a sealed, light-resistant pack the ubiquinone is chemically robust, but light, heat and oxygen at exposed surfaces degrade it and can raise the related-substance content. The pack and the matrix, not the certificate, set the retest period. In one lineCoenzyme Q10 is already fully oxidised, so its shelf life turns on light, heat and the pack rather than on a slow conversion to ubiquinol. ## The powder: light, heat and moisture The catalog sets loss on drying at ≤1.0%. That is a release gate, not a storage allowance. The powder is not strongly hygroscopic, but a damp pack still raises the loss on drying, changes the flow and lowers the as-is assay. An open pouch gives the material a new storage history. Light is the more important driver. Coenzyme Q10 absorbs in the ultraviolet, and exposure can raise the (2Z)-isomer and other related substances. The change may be small enough to leave the assay inside its range while the chromatogram acquires a shoulder. An opaque or foil pack is the control, and a clear jar on a windowsill is the exposure. Heat matters twice. It accelerates the light-driven reactions, and the melting range sits at 48–52 °C, close enough to a hot loading bay, a metal container in the sun or a drying tunnel to soften the powder. A material that has melted and re-solidified may still pass the assay while its crystal form, bulk density and flow have changed. Keep the sealed pack below that range. ## The solution and the oil phase Ubiquinone is insoluble in water. A clear aqueous drink is therefore not a solution of coenzyme Q10; it is an emulsion or a dispersion, and its stability belongs to that system. In an oil, the material dissolves and the carrier becomes part of the stability question: a vegetable oil can oxidise, and its peroxide value can rise before the ubiquinone result moves. Dissolving ubiquinone in oil usually needs warming, and warming above the melting range adds a heat load that the dry powder never sees. A softgel fill is a dispersion of the solid or a solution in oil, depending on the concentration and the process; either way, light and oxygen reach the fill through the shell and the pack. In an emulsion, light, oxygen, metal ions and shear act together, and the emulsion can fail physically before the assay falls. A bulk-powder stability result does not transfer to a beverage or a softgel. ## What drives degradation Factors that move coenzyme Q10 during storage | Factor | What it does | Control | Light | Photodegradation; (2Z)-isomer and related substances | Opaque or foil pack; dark store | Heat | Melting, recrystallisation and faster degradation | Keep below the melting range; cool process | Oxygen | Oxidises the oil carrier and exposed surfaces | Low headspace; nitrogen where specified | Moisture | Raises loss on drying; changes flow and as-is assay | Sealed pack; dry store | Metal ions | Catalyse oxidation in oils and emulsions | Avoid iron and copper contact | Shear and interface | Emulsion instability; local overheating | Validated mixing and homogenisation These factors combine. A warm, bright, humid store is worse than three separate effects, and an oil suspension in clear glass combines light, oxygen and heat. The useful question is how stable it is in a given pack, matrix and time frame. ## The pack is the barrier The standard pack is a 1 kg foil pouch. The foil blocks light and moisture; the seal is the weak point. A folded-over pouch is not resealed like a heat-sealed pack, and its headspace now holds humid air. Transfer a long-held remainder to a smaller opaque container, or keep it within a stated in-use period. The 25 kg fiber drum is the bulk pack. The inner liner is the moisture barrier, so keep it closed, keep the drum off a damp floor and record the opening date. The lot code on the drum, the liner and the certificate should agree. A drum that has been opened for sampling and left open is no longer the pack that the stability data describes. For an oil suspension, the pack also has to exclude oxygen. Nitrogen flushing is not implied by the standard pack; if the format needs it, write it into the specification. For a water-dispersible grade, the carrier can be the moisture-sensitive part, so set the pack and in-use period for the premix. ## A stability protocol for the ingredient A useful protocol states the pack, the storage condition, the time points and the tests. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% relative humidity cover the warehouse; accelerated storage at 40 °C/75% relative humidity stresses the pack. Because light is a primary failure mode, add a photostability arm rather than relying on a dark incubator. Test assay, related substances, loss on drying, appearance and microbiology at each point. Add melting point and identity at the start and the end, because a change in crystal form can pass an assay. For an oil suspension, add the carrier's peroxide value and fatty-acid profile. The report should show individual results and identify the pack and the lot family. Ask for the stability summary for the pack you will buy. A 1 kg pouch and a 25 kg drum differ in headspace, surface-to-volume ratio and opening history, and a result from one does not automatically describe the other. ## The finished formula changes the answer A hard capsule or tablet starts with low water activity, but the excipients and the shell can still move moisture into the fill. Check loss on drying at release and after storage, and watch the appearance of the powder. A granulated grade adds a carrier and a binder, and those materials bring their own moisture and compatibility questions. A softgel combines an oil carrier, a shell and an oxygen barrier. The fill can be a suspension or a solution, and the shell can lose or gain water during storage. A stick pack fails at the seal; a pinhole in the foil is enough. A beverage emulsion combines light, oxygen, heat and shear, and its shelf life has to be measured in the finished drink. An overage is a label and formulation decision, not a repair for a pack that lets light or moisture in. The ingredient's bulk data is the starting point; the finished-product data is the answer. ## How the shelf life is set We do not publish one shelf-life number for coenzyme Q10, because the pack and the storage condition set it. The assigned retest period belongs on the specification and is supported by stability data for that pack. A number without a pack, a condition and a test panel is not a shelf life; it is a claim. After the retest period, re-assay the retained sample before extending use. Do not extend by assumption, and do not carry a bulk figure across to a repacked container. The product hub lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the HPLC method note describes the assay; the quality page describes the release workflow. ### 04 CoQ10: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/specialty/coenzyme-q10/moq/ Reviewed: 2026-11-20 The MOQ for coenzyme Q10 is 1 kg, supplied as a 1 kg foil pouch; the standard bulk pack is a 25 kg fiber drum. Lead time is 1–7 days for the standard pack. A firm quotation needs the form, the assay basis, the quantity and pack, the destination and Incoterm, the documents and the intended market. In one lineOne kilogram is the smallest pack that can be sealed, sampled and traced as a CoQ10 lot; the 25 kg drum is the production unit. ## Why the minimum is 1 kg A kilogram covers a bench trial, a retained sample and an independent identity test, and it is small enough to move as a parcel before the production plan is fixed. It is also a sealed commercial unit with its own lot code, not a scoop taken from a drum. That matters for a material whose identity depends on the form, the melting point and the related-substance profile as much as on the assay. Below 1 kg, the material is usually split from a larger lot and repacked. The split adds handling, breaks the original pack identity and makes traceability harder without changing the chemistry. The 25 kg drum is the production unit. It reduces handling per kilogram, but it also commits inventory and a storage period. Coenzyme Q10 powder has a low bulk density, so a 25 kg drum is a larger package than the weight suggests; check the storage volume before ordering. The MOQ is a pack decision, not a volume target. ## Packs and formats Standard coenzyme Q10 packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Light and moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Oil suspension | On request | Softgel fill | Carrier and concentration agreed in the specification | Granulated powder | On request | Flow and tableting | Particle profile and carrier change The catalog form is an 80 mesh powder: ≥95% through 80 mesh. Granulation or an oil suspension is a different specification, not merely a packing choice. If the dosage form needs a coarser, freer-flowing powder or a carrier, say so before the quotation, because the change moves the particle-size line, the assay per gram and possibly the lead time. A water-dispersible grade is a further specification with an emulsifier or carrier. It is not a pack option for the native powder. Ask for the assay of the premix and the dispersion test, not only the ubiquinone assay. ## Lead time and dispatch The standard pack is quoted at 1–7 days from order confirmation. That window covers picking, document preparation and dispatch; it does not include the shipping transit, customs clearance or the customer's own quality release. A custom granulation, an oil suspension or a non-standard pack adds time, and the quotation should state it separately. Ask for the dispatch date, not only the range. A 1 kg pouch usually moves as a parcel, while a 25 kg drum travels on a pallet; the Incoterm says who books the freight and who clears entry. The COA and the rest of the lot documents should travel with the pack, not follow it after arrival. If the material is going into a softgel or a tableting run, order against the production date rather than against the arrival date. A dispatch window is not a quality-release window, and the customer's own testing takes time after the drum arrives. ## What a quotation needs Six items make a quotation firm enough to compare: - Product and form. Ubiquinone (coenzyme Q10), CAS 303-98-0, with the oxidised form written out. “CoQ10” alone does not distinguish it from ubiquinol. - Specification. Assay basis, loss on drying, melting point, particle size, heavy metals and microbiology. - Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated, oil-suspension or water-dispersible variant. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, specification, SDS, and any market-specific statement the importer needs. - Intended use and market. Supplement, food or another use, and the market where the finished product will be sold. A quotation without the form and the market is incomplete. The same powder can be suitable for one destination and outside the file for another, and the paperwork is part of the offer. Commercial terms are stated on the quotation, not on this page. ## The sample is a lot, not a demonstration The 1 kg pack is the qualification sample. Test identity, assay, loss on drying, melting point and microbiology before scaling, and keep a retained sample from the same pack. The lot code on the sample, the COA and the quotation should match. A sample that cannot be traced to a lot is a demonstration, not a qualification. A bench trial that needs less than a kilogram is a repack. It leaves a bulk lot, gets its own handling record and cannot be presented as the 1 kg foil pack. Ask for the split in writing and keep its lot code with the trial results. The powder on the bench and the powder in the production drum may come from different lots even when the specification is identical. For a softgel trial, the oil suspension sample should carry the carrier and the concentration, not only the ubiquinone weight. A suspension made at a different solids load will behave differently in the filling machine, and the trial result will not transfer. ## Terms to settle before the first order The quotation should show the commercial terms and the quality terms on the same page: Incoterm, 1 kg pouch or 25 kg drum, dispatch window, specification revision, a COA for each lot, the retained sample, the retest period and the route for any change. Settle those in a quality agreement before the first production order; the same conversation is harder after a dispute. If a lot misses the agreed specification, the route is the retained sample and a joint re-test against the named method, not a photograph of the drum. The quotation and the quality agreement should say who pays for the referee laboratory and which laboratory both sides accept. A return decided on appearance alone is hard to defend on either side. The product hub carries the catalog specification; the COA page lists the release tests; the compliance page covers the market files; the MOQ glossary entry defines the term; the logistics page covers shipping and documents. ### 05 The regulatory file for coenzyme Q10 URL: https://nutrition.rainwoodbio.com/products/specialty/coenzyme-q10/compliance/ Reviewed: 2026-11-20 Coenzyme Q10 is sold as ubiquinone, CAS 303-98-0, a substance with a long supplement history rather than a vitamin or a mineral. The regulatory file is built from the specification, the lot certificate, the destination's supplement rules, the contaminant limits, the label and the claim review. The buyer's regulatory team confirms the route for the finished product. In one lineCoenzyme Q10 is not a vitamin or a mineral: the EU file rests on national supplement rules, a novel-food check and a claim register with no authorised CoQ10 claim. ## What the file contains The file has four parts: the specification for ubiquinone, the certificate that released the lot, the rules that apply to the finished product in the destination, and the record of how source, process and pack changes are handled. The COA reports the lot, the TDS states the specification and the SDS covers handling. None of them authorises a market entry. Beyond the certificate, the pack should carry the allergen and GMO statements, the origin record for the manufacturing source, the residual-solvent statement and any declaration the customer needs. If one of those is missing for the lot, name the gap before the order moves. A versioned document list at the front of the folder prevents the quotation, the specification and the certificate from drifting apart. ## European Union Coenzyme Q10 is not a vitamin or a mineral, so it is not one of the substances listed in Annex I of Directive 2002/46/EC for food supplements. It is used as an “other substance with a nutritional or physiological effect”, and that places the detailed conditions in member-state law. Notification duties, maximum levels and the line between a food supplement and a medicinal product have differed between member states, and they can change. A single EU-wide maximum level does not exist for this ingredient. The novel-food question is separate. Ubiquinone has a history of use in food supplements in the EU, and the Commission's Novel Food Catalogue is a non-binding orientation rather than an authorisation. The catalogue entry, the process and the form have to be checked for the specific material as of the review date. The reduced form, ubiquinol, is a different case: do not assume that the ubiquinone history extends to it, and check the current entry for the exact ubiquinol derivative and its process. The claim position is clearer than the entry position. As of this review, the EU Register of nutrition and health claims contains no authorised claim for coenzyme Q10. Mechanism language about energy or mitochondria is not an authorised claim, and a claim written for one form does not transfer to the other. ## United States In the United States, coenzyme Q10 is sold as a dietary ingredient under DSHEA. The ingredient has a long supplement history, and the supplier should name the basis it relies on and the document behind it; the buyer then checks that the basis extends to the finished product and the intended use. A USP monograph for ubidecarenone exists, which is useful for a specification but is not a market authorisation. The Supplement Facts panel names the dietary ingredient and its quantity per serving. A structure/function statement needs substantiation and the DSHEA disclaimer, and it must not be a disease claim. The FDA does not approve dietary supplements or their labels before marketing, so the label review is the brand's responsibility, not a step in the certificate. ## United Kingdom The UK is not one file. Great Britain uses the GB register and GB labelling; Northern Ireland remains under the EU framework, including the EU novel-food and claims position. The delivery address decides which applies, and the buyer's regulatory team should record that decision with the order so the label and the citation can be checked later. ## Contaminants and limits The contaminant panel is a finished-product calculation, not only a drum result. The table below is a starting point for a food-supplement file; the current destination text and the daily dose decide the final limit. Contaminant limits to confirm for the finished product | Parameter | Typical supplement reference | What the file should show | Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method, limit and the finished-product calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception that applies | Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result and method | Arsenic (As) | Customer or market limit | The agreed limit and the method, stated on the certificate For the EU, the contaminant limits sit in Regulation (EU) 2023/915 and its amendments, and the food-supplement category has its own entries. Convert the lot result to the finished-product dose before comparing it with the limit: a powder result that passes at one gram a day can fail at a much higher intake. The calculation belongs in the file, not in a covering email. ## Claims for coenzyme Q10 The form is part of the claim file. In the EU, as of this review, there is no authorised health claim for coenzyme Q10, and the absence is not repaired by citing a mechanism or a study. In the US, a structure/function statement needs substantiation and the DSHEA disclaimer, and no disease claim is open in either market. This site publishes the specification and makes no health claim. A label that names ubiquinone and a label that names ubiquinol are making different ingredient declarations. The claim review has to start from the form on the certificate, not from the marketing name. If the claim was written for one form and the order is placed for the other, the file and the label no longer match. ## Documents for the file The buyer's file needs the COA with the HPLC assay on the anhydrous basis, the related-substance chromatogram, the identity tests, loss on drying, the metal panel and the microbiology count. The specification must name ubiquinone and the assay basis; an as-is figure and an anhydrous figure are not interchangeable. Add the source and process description, the TDS, the SDS, allergen and GMO statements, the residual-solvent statement, the stability summary and the novel-food status for the form. For an oil suspension, add the carrier specification, its peroxide value and the concentration. For a water-dispersible grade, add the carrier, the assay of the premix and the dispersion test. The coenzyme Q10 product page carries the catalog specification, and the identity page explains the analytical evidence. ## Checklist before the first order - Specification version, CAS 303-98-0 and the oxidised form are named. - COA, TDS, SDS, allergen, GMO, origin and residual-solvent statements are on file. - The contaminant results are converted to the finished-product dose. - The label and the claim have been reviewed for the destination. - The novel-food status of the exact form has been checked as of the review date. - The source, process and pack are under change control. - The quotation, the specification and the certificate refer to the same version. The quality page describes the release file, and the EU regulatory notes collect the framework references. A certificate supports the material; it does not replace the destination route. ### 06 How we prove a coenzyme Q10 lot is ubiquinone URL: https://nutrition.rainwoodbio.com/products/specialty/coenzyme-q10/identity/ Reviewed: 2026-11-20 A coenzyme Q10 lot is ubiquinone when four lines agree: the document names CAS 303-98-0 and the oxidised form, HPLC retention and UV at 275 nm match the reference, the melting point and infrared spectrum match the solid, and the mass balance closes with the loss on drying and the related-substance profile. An assay percentage alone does not separate ubiquinone from ubiquinol, a Q9-rich mixture or a dilution. In one lineIdentity is the agreement of four measurements: HPLC retention and UV say the quinone, the melting point and IR say the solid, and the redox ratio says the form. ## The four identity layers A certificate can name the right material and still fail to prove it. The four layers below are separate questions, and each one needs its own evidence. A supplier who answers only the first has described the paperwork, not the powder. Four layers of coenzyme Q10 identity | Layer | Question | Test | What it proves | Document | Is the form and CAS named? | Name, CAS 303-98-0, formula | Paperwork only | Chromatography | Is the quinone coenzyme Q10? | HPLC retention, UV at 275 nm, related substances | The molecule, not the form | Solid | Is it crystalline ubiquinone? | Melting point, infrared spectrum | The solid form | Mass balance | Is it diluted or partly reduced? | Assay, loss on drying, redox ratio, impurities | Consistency of the numbers The document layer is necessary but weak: a certificate can carry the right name and the wrong powder. The chromatography layer is the strongest single test, but a 275 nm assay calibrated for ubiquinone is blind to ubiquinol unless the method is set up to see both. The solid layer catches a different failure, such as an amorphous or melted material. The mass balance catches dilution and moisture. ## The redox ratio and the homologue ratio Ubiquinone and ubiquinol absorb differently and elute differently. A dual-wavelength HPLC method can read ubiquinone at 275 nm and ubiquinol at 290 nm, and report the two as a ratio. That ratio is the form check. A single peak reported as “total CoQ10” after an oxidation step measures the sum and destroys the information about which form was present. For a ubiquinone lot, the useful question is how much ubiquinol is present, not whether the reduced form is the main component. For a ubiquinol lot, the catalog sets ubiquinone at ≤2.0%, because the reduced form oxidises back to ubiquinone in air and light. In both directions, the ratio is a form check rather than a potency check. The second ratio is the homologue profile. Coenzymes Q7, Q8, Q9 and Q11 share the quinone head and differ in the number of isoprene units. Coenzyme Q9 is the pharmacopoeial related compound A, and a Q9-rich side fraction can pass a total quinone assay while failing the Q10 identity. The chromatogram should name the homologues it bounded and the relative retention of each. ## X-ray diffraction and the solid state X-ray diffraction answers a question the assay cannot: is the solid crystalline, and does its pattern match a reference? Ubiquinone can be crystalline, and its melting range of 48–52 °C is consistent with a crystalline solid that softens at a modest temperature. A melted and re-solidified lot may retain the same assay while its diffraction pattern and bulk density change. XRD is not a routine release test for this product, and a certificate that says only “XRD conforms” without the pattern, the reference and the detection limit has added little. Ask for those three items when solid form is the dispute. XRD is not a form-specific assay: it describes the packing of the solid and needs a reference pattern for each form. For a disputed lot, XRD plus melting point plus HPLC/UV is stronger than any one of them. The combination separates a crystal-form problem from a purity problem and from a form problem. ## What adulteration looks like Coenzyme Q10 substitutions and the signals that expose them | Adulterant | What it does | Signal | Test | Ubiquinol | Reduced form; different colour and stability | Response at 290 nm; ratio shift | Dual-wavelength HPLC | Coenzyme Q9 | Shorter side chain; related compound A | Extra peak at relative retention about 0.75 | HPLC related substances | Dilution | Lowers assay; changes loss on drying | Assay low; ash or carrier present | Mass balance, infrared | Oil or carrier | Lowers assay per gram | Greasy feel; extractable matter | Assay, infrared, extraction | Dye | Matches the yellow-orange colour | Colour without a UV or IR match | UV spectrum, infrared, HPLC | (2Z)-Isomer | Light- or heat-formed geometric isomer | Extra peak near the main peak | HPLC isomer method Colour is the weakest signal. Yellow to orange-yellow covers a wide range, and a dye can reproduce it. The stronger signals are the chromatographic profile, the melting point and the infrared spectrum. A certificate that reports appearance and assay but not identity has left the most likely substitution untested. ## How to write identity into the specification - “Ubiquinone (coenzyme Q10), CAS 303-98-0, C59H90O4, oxidised form.” - “Assay 98.0–101.0% by HPLC on the anhydrous basis; loss on drying ≤1.0%.” - “Identification by HPLC retention and UV spectrum at 275 nm; report the chromatogram.” - “Melting point 48–52 °C; add infrared identity where the pharmacopoeial file requires it.” - “Related substances: coenzymes Q7, Q8, Q9 and Q11 and the (2Z)-isomer within the agreed limits.” - “Redox ratio: ubiquinol bounded by the agreed limit; report the method.” - “Particle size ≥95% through 80 mesh; heavy metals and microbiology as listed.” Identity is not a single line on a certificate. It is the set of lines that agree, and the specification should ask for all of them when the form matters. ## Five questions for the supplier - Which form is this lot, and which CAS number is on the certificate? - Can you provide the HPLC chromatogram with the related-substance peaks, not only the assay percentage? - What are the melting point and the infrared spectrum for this lot? - What is the ubiquinol result, and which method and wavelength were used? - If the lot is disputed, will you accept a joint re-test on the retained sample? Five direct answers amount to an identity file. A single assay percentage does not. The product hub carries the catalog specification; the COA page shows where each figure sits on the certificate; the grades page covers the presentations; the level-four comparison covers the reduced form; the HPLC method note explains the separation. ### 01 What the COA for calcium HMB actually contains URL: https://nutrition.rainwoodbio.com/products/specialty/hmb/coa/ Reviewed: 2026-11-20 A calcium HMB certificate reports appearance, identification by HPLC and infrared, assay by HPLC, calcium by titration, loss on drying, particle size, the heavy-metal panel and microbiology. The assay and the calcium figure are separate measurements: the first quantifies the hydroxy acid, the second the counter-ion that makes it the calcium salt. The limits below are the catalog gates; the certificate records what one lot measured against them. In one lineAssay and calcium answer different questions: the HPLC percentage measures the acid, the titration measures the counter-ion, and the loss on drying decides how the two are read. ## The certificate as a line-by-line report A certificate is usable when a reviewer can follow every line. Four fields do that work: the analyte, the method, the release limit and the measured result. A “conforms” line without a method records a judgement, not an observation. Calcium HMB needs two identification techniques. The molecule has no ultraviolet chromophore, so an HPLC retention time is thin evidence; an infrared spectrum supplies the functional-group evidence, and the two together are the identification. Release tests and limits · calcium HMB | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | HPLC retention and IR spectrum | Conforms to the reference | Assay | HPLC | 98.0–102.0% | Calcium | Complexometric titration | 12.0–14.0% | Loss on drying | Gravimetric | ≤5.0% | Heavy metals | ICP-MS | Pb ≤3; As ≤2; Cd ≤1; Hg ≤0.1 mg/kg | Microbiology | Plate count with a pathogen screen | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli, Salmonella not detected | Particle size | Sieve analysis | ≥95% through 80 mesh ## Assay basis, detector and the calcium calculation “98.0–102.0%” is incomplete until the certificate says two more things: whether the percentage refers to HMB or to calcium HMB, and whether it is calculated on the powder as received or on the dried solids. Two HMB molecules sit in one calcium salt, so 236.26 g of acid is carried by 274.32 g of the anhydrous salt; a lot that reads 100% as the salt reads 86.1% as HMB, so two quotations can describe one powder with two numbers. Ask which detector the HPLC uses. An aliphatic hydroxy acid has no strong ultraviolet absorption, so the method relies on refractive-index detection, ion-exclusion separation or a derivatisation step that installs a chromophore. Each choice carries a different limit of quantification, which the certificate should name rather than print “HPLC”. Calcium is measured separately, usually by complexometric titration with EDTA, and calculated back to the salt. The stoichiometric calcium in C10H18CaO6 is 14.6% by mass. The catalog window here is 12.0–14.0%, so a top-of-range result is close to theory and a bottom-of-range result needs an explanation. Moisture inside the 5.0% limit accounts for about 0.7 percentage points; anything beyond that points to the hydrate state, a different stoichiometry or a diluent. ## Release limit against batch result The release limit is the boundary a lot is accepted against; the batch result is the figure the laboratory obtained from that lot. The two belong on the page together, in separate columns, with the method beside them. A column that repeats the specification range has recorded the gate, not the measurement. What each release line must carry | Parameter | Release limit | Batch result | Assay | 98.0–102.0% | The measured figure with its reference (HMB or salt) and its basis | Calcium | 12.0–14.0% | The measured figure, the titration method and the factor applied | Loss on drying | ≤5.0% | The measured percentage and the drying condition | Identification | Conforms | The retention time and the infrared bands compared | Heavy metals | Per element | A figure in mg/kg for each element, not a total | Particle size | ≥95% through 80 mesh | The measured percentage passing the sieve “Passes specification” is a conclusion the reader should be able to reach from the page. Assay and calcium are independent checks on one identity: a high assay beside a low calcium describes a blend, not a salt. The microbiology line needs a count and an absence statement; “satisfactory” alone hides which was tested. ## What moves between batches Crystallisation and drying move the loss on drying and, with it, the calcium figure when the result is calculated on the powder as received. Milling and sieving move the particle-size result without touching the chemistry, so the 80 mesh line can shift when the mill or the sieve changes. The titration adds a small band: indicator choice, endpoint and EDTA standardisation can move calcium by a few tenths between laboratories. Calcium HMB is hygroscopic, and that property shows up in the numbers before it shows up in the drum. A pouch left open in a humid room gains moisture, the loss on drying climbs, the as-is assay falls and the powder begins to cake. None of those changes is a synthesis failure, so the storage condition belongs in the specification. White to off-white is a wide window; a lot at one edge is not automatically out. What matters is a trend across lots: assay drifting low while calcium holds, calcium drifting low while the assay holds, or loss on drying climbing with each delivery. The code printed on the certificate has to be the code on the pouch, on the drum and on the sample kept back. ## When an outside laboratory is warranted Commission an outside test for a new source, a first lot entering a regulated market, a disputed form, or a label that says calcium HMB while the certificate says only “HMB”. The useful panel confirms the two weakest points: identity by HPLC with the detector named, and calcium by ICP-OES, independent of the titration and able to catch a calculation error or a dilution. Add loss on drying, the ICP-MS metal panel, microbiology and a sieve result. If the salt is disputed, add a nitrogen determination: HMB contains no nitrogen, so a nitrogen figure above the method limit points to an amino acid such as leucine rather than to the declared material. Ask for the limit of detection beside every screen; a “not detected” line without a limit describes the method, not the sample. Chain of custody decides whether the result can be used: the sample tested should be the retained sample, the report names the lot, and a dispute goes to a referee laboratory agreed in advance. ## Comparing two offers Compare six attributes: form and CAS number; assay together with its reference and basis; calcium and the method behind it; loss on drying; the metal and microbiology results; the pack and its lot code. When two offers agree on the assay but not on its reference, or on calcium but not on the method, they are describing different powders. Traceability is the second layer: who made the lot, by which route the calcium salt was produced, and which drying and milling steps followed should all appear on the certificate. The catalog specification is on the HMB product page. The identity page explains which measurements tell the salt apart from the free acid; the titration is described in the complexometric method note, the detector question in the HPLC note, and the release workflow on the quality page. ### 02 Calcium HMB and HMB free acid: choosing the form URL: https://nutrition.rainwoodbio.com/products/specialty/hmb/grades/ Reviewed: 2026-11-20 HMB is sold as the calcium salt, a white powder, or as the free acid, a pale yellow liquid. The salt is the form used in capsules, tablets and stick packs; the free acid puts more HMB into every gram and suits ready-to-drink formats. The two forms do not share a CAS number, a molecular weight or a label declaration, so the form has to be fixed before the specification is written. In one lineThe calcium salt and the free acid carry different CAS numbers, different HMB mass per gram and different label names, so the form is a specification decision before it is a formulation one. ## Why HMB is offered in two forms HMB is 3-hydroxy-3-methylbutyric acid, a small branched-chain hydroxy acid. Its single carboxyl group can stay protonated, which gives the free acid, or it can be neutralised by calcium, which gives a salt with two acid molecules for each calcium ion. That is the whole difference, and it is enough to produce two products with separate identities. Suppliers sell the calcium salt as the supplement form because it is a stable, free-flowing solid that can be weighed, blended and filled on ordinary equipment. The free acid is a liquid at room temperature, which makes it convenient for a beverage line and awkward for a capsule line. Neither form is a diluted or coated version of the other; a purchase order that says only “HMB” has not specified either. ## The two forms side by side Calcium HMB and HMB free acid | Property | Calcium HMB | HMB free acid | CAS number | 135236-72-5 | 625-08-1 | Formula | C10H18CaO6 | C5H10O3 | Molecular weight | 274.32 (anhydrous) | 118.13 | Appearance | White to off-white powder | Colourless to pale yellow liquid | HMB per gram | About 0.81–0.86 g | 1.00 g | Calcium | 12.0–14.0% by titration | None | Typical dosage form | Capsule, tablet, stick pack | Ready-to-drink, liquid concentrate | Label name | Calcium β-hydroxy-β-methylbutyrate | β-Hydroxy-β-methylbutyric acid The mass difference is the commercial consequence. Every gram of calcium salt carries the calcium, so a formula written around a gram of HMB needs more salt than free acid. The next two sections work through the arithmetic and the handling. ## Solubility, flow and handling The salt dissolves in water to give a clear solution, and that is why it works in stick packs and drink mixes. It is also hygroscopic: an open pouch takes up moisture, the powder cakes and the loss on drying climbs. The catalog specification therefore pairs the 80 mesh particle size with a loss on drying limit of 5.0%, and the pack has to be closed between weighings. A granulated grade is available on request when a line needs better flow and less dust. The free acid is a liquid that mixes with water and ethanol, and its solutions are acidic. That acidity has to be buffered in a ready-to-drink formula, and the buffer has to be checked against the calcium in any other ingredient. The free acid is normally dispensed by weight or volume into the aqueous phase; it is not a powder that can be scooped into a capsule. Solubility is not the same as stability. The salt solution is close to neutral and can cloud when it meets phosphate or citrate salts, because calcium phosphate and calcium citrate are much less soluble than calcium HMB. The free acid solution has a different pH and a different set of interactions, so a formula cannot be moved from one form to the other without checking the look of the solution, its pH and the hold time. ## Dose arithmetic and the label The conversion follows the molecular weights. The anhydrous salt is 274.32 g/mol and carries two HMB molecules at 118.13 g/mol each, so 236.26 ÷ 274.32 gives 86.1% HMB by mass; the monohydrate, at 292.34 g/mol, gives 80.8%. A label that declares 3 g of calcium HMB is therefore declaring about 2.5 g of HMB, and the same 2.5 g from the free acid weighs 2.5 g. The 3 g figure is the quantity used in published research on the calcium salt, not a recommendation for a finished product. The salt also puts calcium on the label. At 12.0–14.0% calcium, a 3 g serving carries 360–420 mg of the mineral, which is a material fraction of the daily reference intake in both the EU and the US. That calcium line belongs in the nutrition declaration, and it is one reason the two forms are not label-equivalent even when the HMB figure is matched. Declare the form as well as the quantity. “HMB 2.5 g” does not say whether the panel means the acid or the salt, and a reader cannot convert it without the form. The certificate, the specification and the panel should use the same name and the same basis. ## What to write into the specification - “Calcium β-hydroxy-β-methylbutyrate, CAS 135236-72-5, C10H18CaO6.” - “Assay 98.0–102.0% by HPLC, with the assay reference and the basis stated.” - “Calcium 12.0–14.0% by complexometric titration; report the method.” - “Loss on drying ≤5.0%; particle size ≥95% through 80 mesh.” - “Heavy metals and microbiology as listed on the specification.” - “Destination market and dosage form confirmed before the order.” We supply the calcium salt. The free acid is a separate purchase with its own specification, pack and label, and it should not be substituted without written change control. The product hub carries the catalog values; the level-four comparison sets HMB against creatine monohydrate; the compliance page covers the market route; the methods section explains the assays; the quality page describes release. ## When a form is the wrong choice If the dosage form is a capsule or a dry stick, the free acid is the wrong starting point: it is a liquid, and adsorbing it onto a carrier produces a different specification with a different assay and a different label. If the formula is a clear ready-to-drink and the calcium load is already high, the salt may add more mineral than the label wants, and the free acid becomes the practical option. The market file can also decide. A buyer who has cleared the calcium salt for a market should not assume the free acid inherits that clearance, because the two are separate entries with separate names. The reverse is equally true, and a form switch in either direction needs a new specification, a new label check and a written change control. ### 02.1 HMB vs creatine monohydrate: two ingredients, two labels URL: https://nutrition.rainwoodbio.com/products/specialty/hmb/grades/hmb-vs-creatine/ Reviewed: 2026-11-20 HMB and creatine monohydrate are different molecules with different assays, different serving arithmetic and different label lines. Calcium HMB is the calcium salt of a leucine metabolite, specified at 98.0–102.0% by HPLC with 12.0–14.0% calcium; creatine monohydrate is specified at 99.0–101.0% by HPLC with limits on creatinine and dicyandiamide. A formula can carry both, but neither can replace the other at the balance or on the panel. In one lineTwo ingredients, two identities: the HMB assay turns on calcium and the creatine assay turns on creatinine, so neither number can stand in for the other on the label. ## Two molecules, two chemistries HMB is 3-hydroxy-3-methylbutyric acid, a small hydroxy acid produced from leucine. The commercial powder is the calcium salt, C10H18CaO6, with two acid molecules for each calcium ion and a molecular weight of 274.32. Creatine is a guanidine compound, methylguanidine acetic acid, supplied as the monohydrate C4H9N3O2·H2O at 149.15 g/mol. One is a hydroxy acid salt; the other is a nitrogen-rich organic acid hydrate. The elemental difference is analytically useful. Calcium HMB contains no nitrogen, while creatine monohydrate is about 28% nitrogen by mass. A nitrogen determination therefore tells the two apart in a blend, and a certificate that reports nitrogen or a protein factor for an HMB lot has described something other than calcium HMB. ## The specification side by side Calcium HMB and creatine monohydrate | Parameter | Calcium HMB | Creatine monohydrate | CAS number | 135236-72-5 | 6020-87-7 | Formula | C10H18CaO6 | C4H9N3O2·H2O | Molecular weight | 274.32 (anhydrous) | 149.15 | Assay | 98.0–102.0% by HPLC, as the salt | 99.0–101.0% by HPLC | Second identity line | Calcium 12.0–14.0% | Creatinine ≤100 ppm | Process impurity | Free acid | Dicyandiamide ≤50 ppm | Nitrogen | None | About 28% by mass | Loss on drying | ≤5.0% | ≤12.0%, by design for the hydrate | Particle size | ≥95% through 80 mesh | 80 or 200 mesh The two assay figures look similar and mean different things. HMB's 98.0–102.0% is only complete with the calcium line beside it, because the calcium proves the salt. Creatine's 99.0–101.0% is only complete with creatinine and dicyandiamide beside it, because those are what a poor synthesis or a hot drying step leaves behind. A buyer who compares only the headline percentages has compared the least informative line on each certificate. ## Serving arithmetic and the label dose A 3 g serving of calcium HMB carries about 2.5 g of HMB, because the salt is 80.8–86.1% acid by mass depending on the hydrate. The same 3 g also carries 360–420 mg of calcium. A 5 g serving of creatine monohydrate carries about 4.4 g of creatine, because the monohydrate is 87.9% creatine by mass. Those are the quantities used in published research on each ingredient, not recommendations for a finished product. The serving sizes do not fit the same dosage form. Three grams of HMB salt plus five grams of creatine is eight grams of powder before any excipient, which is a stick pack or a scoop, not a capsule. A capsule product usually carries one of the two, and the label then has a single ingredient to declare. ## What each label has to say The panel names differ: calcium β-hydroxy-β-methylbutyrate for the HMB powder, creatine monohydrate for the other. Writing “HMB” alone leaves the form open, and writing “creatine” alone leaves the form open in a market where hydrochloride, nitrate and other creatine forms are sold. The declared name should match the certificate, not the marketing shorthand. The calcium line is the label consequence that buyers miss. In the US, 360–420 mg of calcium from a 3 g HMB serving is a material share of the 1,300 mg daily value and must appear in the mineral declaration. In the EU, the same calcium is roughly half of the 800 mg reference intake. Creatine monohydrate contributes no mineral, so a formula that switches between the two changes the nutrition panel even when the active grams are matched. Claims are reviewed separately from both panels. Words such as recovery, strength and lean mass are claim language in either market, and the substantiation for one ingredient does not transfer to the other. ## Using both in one formula The two powders are physically compatible: both are white, both dissolve in water, and neither is a strong acid or base that would attack the other in a dry blend. The formulation questions sit elsewhere. Calcium HMB is hygroscopic and the calcium can haze a beverage that contains phosphate or citrate; creatine in solution converts to creatinine over time, and heat accelerates the change, so a ready-to-drink has to be validated in its own matrix rather than inferred from powder data. A dry blend avoids most of that. Both ingredients are milled powders, and a stick pack or a scoop can carry the eight-gram combination with a flow agent if the line can handle the fill weight. Premix uniformity has to be demonstrated for each ingredient, because the two have different particle-size distributions and different bulk behaviour. Analytically, a combined product needs both panels: HPLC for HMB with the detector named, calcium by titration, HPLC for creatine with creatinine and dicyandiamide. A laboratory set up for one of those methods may not run the other, and a certificate that reports one ingredient has said nothing about the second. ## Substituting one for the other There is no conversion between the two. HMB and creatine are separate dietary ingredients with separate specifications, separate serving sizes and separate label declarations; a formula that swaps one for the other is a new product, not a reformulation of the same one. The change needs a new specification, a new nutrition panel, a new stability study and a new claim review, and the market file for one ingredient does not cover the other. The HMB product hub carries the calcium salt specification, and the creatine monohydrate page carries its own. The COA page explains how the HMB lines are read, the grades page compares HMB with its free acid, the methods section covers the assays, and the quality page describes release. ### 03 Calcium HMB stability: moisture, heat and the pack URL: https://nutrition.rainwoodbio.com/products/specialty/hmb/stability/ Reviewed: 2026-11-20 Calcium HMB is a hygroscopic powder. The solid keeps its assay while the pack stays sealed and dry; moisture, heat and, in a drink, the calcium ion are what change it. The retest period is fixed by data on the actual pack and storage condition, and no certificate can supply it. In one lineMoisture decides calcium HMB: the sealed pack holds the loss on drying, and the retest period belongs to the pack rather than to the molecule. ## The powder: moisture, caking and the seal The catalog puts loss on drying at 5.0%. That figure is a release gate, not an allowance for storage. Open a pouch and the powder starts to exchange water with the room: loss on drying climbs, the as-is assay slips, and the material that was free-flowing begins to cake. The change is physical before it is chemical, but it still takes a lot outside its specification, and a caked drum cannot be sampled fairly. Storage therefore belongs in the specification in practice. Keep the original pack shut, keep the store dry, and let a cold pack come to room temperature before opening so condensation does not settle on the powder. A desiccant is useful in a humid warehouse but cannot replace an intact liner. Once a pouch is open, move the remainder into a smaller moisture-barrier container instead of folding the top over. Heat accelerates the same exchange. Ordinary warehouse temperatures are tolerable for a sealed pack; a summer loading bay, a car boot or a roof space is not. The crystals do not melt at those temperatures, but the moisture gradient across the pack grows, and the cake that forms on cooling is harder to break up. ## The solution: calcium, pH and heat The salt dissolves to a clear, nearly neutral solution, which is why stick packs and ready-to-drink formats use it. In water the calcium ion becomes the new variable. Phosphate, citrate, carbonate and sulfate each form a calcium salt far less soluble than calcium HMB, so a drink containing those anions can haze or precipitate while the HMB assay stays where it was. Calcium and HMB leave solution together, so the analysis that reveals the problem is the analysis of the drink, not of the powder. Heat is the second variable. A hot fill, a pasteurisation step or a long warm hold imposes a load the dry powder never sees, and the drink has to be tested after that load rather than before it. The free-acid form lowers the pH and shifts the same interactions, so a formula cannot be carried from one form to the other without new data. Light matters less here than it does for a coloured active, because HMB has no chromophore in the visible range. The pack still earns its place, but for moisture rather than for photodegradation. A beverage may need light protection for other ingredients; that requirement should not be read as an HMB weakness. ## What drives change during storage Storage factors for calcium HMB | Factor | Effect | Control | Moisture | Loss on drying climbs, the as-is assay drops, caking follows | Sealed pouch, dry store, desiccant where needed | Heat | Faster moisture movement and faster solution reactions | Controlled store, cool process, validated hold time | Calcium-complexing anions | Haze or precipitate in a beverage | Check phosphate, citrate, carbonate and sulfate in the matrix | pH | Shifts solubility and the free-acid fraction in solution | Buffer and validate the matrix pH | Compression and shear | Tablet hardness, capping, local moisture | Validate the compression step on the 80 mesh powder | Pack integrity | A pinhole or a weak seal admits moisture | Seal inspection, liner check, lot code on pack and certificate The rows act together. A hot, damp store is worse than either condition on its own, and a drink that pairs calcium with phosphate at a hot fill combines two rows at once. The useful question is not whether calcium HMB is stable, but in which pack, under which condition and for how long. ## A stability protocol for the ingredient A protocol worth defending names the pack, the condition, the time points and the test panel. Long-term storage at 25 °C and 60% relative humidity covers a controlled warehouse; 30 °C and 65% relative humidity covers a warmer one; 40 °C and 75% relative humidity puts pressure on the pack. Add a light-exposure arm if the pack is clear, and a humidity challenge if the destination is tropical. At each point, measure assay with its reference and basis, calcium, loss on drying, appearance and microbiology. In a genuine degradation the assay and the calcium move together. If the assay holds while calcium falls, the likely causes are a change in hydrate state, precipitation in a liquid sample or a calculation error, not a loss of the molecule. The report should give individual results rather than one line saying “passes”, and it should state the pack studied and the lot family. Request the summary for the pack you intend to buy: a pouch and a drum differ in headspace, in how often they are opened and in surface-to-volume ratio. ## The finished formula changes the answer A capsule or tablet begins dry, but the capsule shell and the excipients can still pass water into the fill, so loss on drying and appearance are checked after storage as well as at release. Direct compression of the 80 mesh powder is the shorter route. A water granulation dissolves the salt and adds a drying step that has to be validated, or the tablet carries that water into storage. A stick pack usually fails at the seal rather than in the fill: one pinhole lets humid air in, so both the strip and the powder are inspected. A ready-to-drink adds pH, calcium and heat to the list, and a gummy adds water activity and a cook step. None of those formats inherits the bulk pouch's retest period. ## Where the retest period comes from There is no single shelf-life number for calcium HMB, because the pack and the storage condition produce the number. The period on the specification rests on the stability file for that pack, and it is a retest period rather than a promise. A figure offered without naming the pack, the storage condition and the tests carries no evidence. At the end of the period, re-assay the retained sample before extending use, and never move a bulk figure onto a repack. The product hub lists the standard packs, the COA page covers the release tests, the MOQ page covers pack and lead time, the methods section explains the assays, and the quality page describes the release workflow. ### 04 Calcium HMB: MOQ, packs and ordering URL: https://nutrition.rainwoodbio.com/products/specialty/hmb/moq/ Reviewed: 2026-11-20 Calcium HMB is packed in a 1 kg foil pouch, and bulk volume moves in a 25 kg fiber drum. Standard packs leave in 1 to 7 days. A quotation becomes an order once six things are fixed: the form, the assay reference, the quantity and pack, the destination and Incoterm, the documents and the market where the material will be used. In one lineA kilogram is the minimum because a smaller split loses the single lot code that sampling, testing and traceability all depend on. ## Why the order starts at 1 kg One pouch covers a bench trial, a retained sample and an independent check of identity and calcium, with material left over for a second run. It also fits a parcel slot, so a formulator can start before the production plan is fixed. Each pouch is filled from a lot and carries that lot's code; anything smaller is a repack, not a pack. Repacking is where traceability thins. The material is handled again, the original pouch is opened, and the link between the sample and the lot now rests on a local record. The 25 kg drum avoids that at the other end: less handling per kilogram, but more inventory and a longer dwell time for a powder that takes up moisture. ## Packs and what each is for Calcium HMB pack sizes | Pack | Net weight | Typical use | Handling note | Foil pouch | 1 kg | Trials, samples, small runs | Heat-sealed; close it between weighings | Fiber drum | 25 kg | Production runs | Liner inside the drum; both carry the lot code | Granulated powder | On request | Better flow, less dust | The sieve profile changes with the granulation The catalog powder passes 80 mesh at 95% or better. A granulated grade is a new specification line rather than a packing option, and it can move both the particle-size result and the dispatch date. Tell us the mesh and the flow the line needs before the quotation is issued, so both can be quoted together. ## Dispatch and transit The standard pack is dispatched 1 to 7 days after the order is confirmed. That covers picking, the documents and the handover to the carrier; transit, customs and the customer's own release come after it. A granulated grade, a special pack or a split below 1 kg adds time and should be quoted as a separate line. Ask for a dispatch date, not only a window. A pouch usually flies as a parcel and a drum goes on a pallet, and the Incoterm decides who books the move and who clears it. The lot documents should be in the same consignment as the goods. The pack also meets its first humidity test on the way. A pouch that waits on a wet dock over a weekend can take up moisture before anyone opens it, so the carton should stay shut until the goods are indoors. A tropical destination is worth mentioning at quotation, when the liner and the desiccant can still be chosen. ## Six things a quotation must state - Form and CAS number. Calcium β-hydroxy-β-methylbutyrate, CAS 135236-72-5. - Specification. Assay together with its reference and basis, calcium, loss on drying, mesh, metals and micro count. - Quantity and pack. The 1 kg pouch, the 25 kg drum, or the granulated grade. - Destination and Incoterm. Country, the destination port or address, plus the trade term. - Documents. COA, TDS and SDS, plus the statements the importer's market requires. - Use and market. Capsule, powder, ready-to-drink or another use, and where it will be sold. Without the form and the market the offer cannot be checked against the file. The same lot can be right for one destination and wrong for another, so the paperwork belongs in the offer rather than in a follow-up email. Commercial terms sit on the quotation, not on this page. ## What the sample has to prove The 1 kg pouch is the qualification unit: identity, assay, calcium, loss on drying and microbiology are tested on it, and a retained portion stays with the same lot code. If the sample, the certificate and the quotation do not share that code, the exercise has not qualified a supply. A trial that needs 200 g is a split, not a catalogue pack. It comes out of a bulk lot, is handled separately and cannot be presented as the sealed 1 kg pouch. Record the split and its lot code with the trial results, because a bench sample and a production drum can come from different lots while both meet the specification. ## Quality terms to fix early Write the commercial and the quality terms into one agreement: Incoterm, pack, dispatch window, specification revision, a certificate with every lot, a sample kept back, the retest period and the procedure for a change. Settling that before the first production order is easier than settling it after a complaint. If a lot fails the agreed specification, the evidence is the retained sample and a re-test by a method both sides named, not a photograph of the drum. Decide in advance which laboratory arbitrates and who pays for it. A return based on appearance alone is difficult to defend from either side. Catalog values sit on the product hub, the COA page sets out what a lot certificate reports, the stability page covers storage, the glossary entry defines the minimum order, and the logistics page covers movement and paperwork. ### 05 The regulatory file for calcium HMB URL: https://nutrition.rainwoodbio.com/products/specialty/hmb/compliance/ Reviewed: 2026-11-20 Calcium HMB is supplied as the calcium salt, CAS 135236-72-5. Three documents answer three different questions: the specification defines the material, the certificate releases a lot against it, and the regulatory file records how the destination market allows it to be sold. The buyer's team confirms that last route, and this page lists what belongs in the folder so the specification and the commercial paperwork can be checked as a set. In one lineOne document cannot answer three questions: the specification defines the material, the certificate releases the lot, and the file records what the destination allows. ## Four parts of the folder The folder holds the current specification for the calcium salt, the certificate for the lot on offer, the limits and labelling rules that apply where the finished product will be sold, and a record of how changes to source, process or pack are approved. The COA speaks for one lot, the TDS for the grade and the SDS for handling. None of them decides the destination route, which is a separate sheet in the same folder. Two HMB-specific lines are easy to lose. The calcium figure is not only an assay check; in the finished product it becomes part of the nutrient declaration, so the file needs the calcium method as well as the number. The assay reference is the other: a certificate that says 99% without saying “as calcium HMB” cannot be matched to a spec or a label. Add the origin record, the allergen and GMO positions, a residual-solvent statement and any declaration the customer's market requires, and list the gaps before the order moves rather than after the ship sails. ## European Union The first EU question is the status of the exact material. Regulation (EU) 2015/2283 governs foods that were not consumed to a significant degree before 15 May 1997, and the novel-food catalogue records how a given substance is classified. Suppliers describe calcium HMB in several ways — long-established ingredient, novel food authorised under the earlier framework, or simply “approved” — and those descriptions are not equivalent. The catalogue entry for the calcium salt is what the buyer's team checks, and the free acid is a separate entry. Around that status sit the general rules: Regulation (EC) 178/2002 for food law, Regulation (EU) 1169/2011 for labelling, and Regulation (EU) 2023/915 for contaminants as of this review. Meeting the catalogue entry does not by itself meet those texts for the finished product. The EU regulatory notes gather the references. ## United States In the US the question is the basis on which calcium HMB enters a dietary supplement. A GRAS conclusion covers a named use and level, not an ingredient in the abstract, so the supplier's statement should say which use it addresses. For a supplement the route is normally a GRAS basis that reaches the finished product or an accepted new dietary ingredient notification; the buyer's team confirms which one the file relies on and that it covers the article being sold. Labelling follows the Supplement Facts format, and calcium from the salt appears in the mineral line as well as in the HMB line. Structure/function wording gets its own review, with substantiation and the DSHEA disclaimer. Neither the label review nor the claim review is something a certificate can supply. ## United Kingdom Two regimes share the UK. Great Britain keeps its own register and labelling rules, while Northern Ireland stays inside the EU framework, including the EU position on calcium HMB. The delivery address, not the customer's head office, selects the regime, and the buyer's team should minute that choice alongside the order, so that label and entry can be checked later. ## Contaminants and the finished dose Contaminant limits apply to the supplement as sold, not to the drum. The ingredient result has to be carried through the dose and through the ingredient's share of the formula. A material that is a small fraction of the serving contributes a small fraction of the limit; a material that is most of the serving contributes nearly all of it. Contaminant reference points for a supplement file | Element | Usual supplement limit | Evidence the file needs | Lead (Pb) | 3.0 mg/kg | Lot result, method, limit and the dose calculation | Cadmium (Cd) | 1.0 mg/kg | Lot result and any category exception | Mercury (Hg) | 0.10 mg/kg | Lot result and method | Arsenic (As) | Agreed with the customer or market | The agreed figure and method, printed on the certificate These are starting points, not a substitute for the current text. A category exception, a lower national figure or a customer specification can tighten any of them, and the daily dose decides how the ingredient result converts into the finished product. ## Claims In the EU a health claim must appear on the Register of nutrition and health claims; wording that is absent from the Register cannot be used, whatever the ingredient's history. In the US a structure/function statement needs substantiation and the disclaimer. Neither market has room for a disease-related claim, and the vocabulary sports marketing reaches for — recovery, strength, lean mass — is claim language that the brand's reviewer tests against the product, its form and the destination market. The certificate supports the material, not the wording. A claim revision does not reopen the specification, and a specification change does not authorise a new claim. Keeping the two files apart lets each be reviewed on its own terms. ## What the buyer's file should hold On the analytical side: the certificate with the HPLC assay, its reference and its basis; calcium by titration; loss on drying; the metal panel; the micro count. On the specification side: the version that names the calcium salt and the assay basis, plus the TDS and SDS. On the trade side: origin, allergen and GMO positions, the residual-solvent statement, the stability summary for the pack, the packaging statement and the supplier's statement of market status. Every one of those documents should carry the same lot code as the pack. The HMB product page carries the catalog specification and the quality page describes how the release file is assembled. The supplier keeps source, process and pack under change control; the buyer adds the destination route, the finished dose and the label review. ## Checklist before the first order - The specification version, CAS number and calcium salt are written out in full. - Certificate, TDS, SDS, origin, allergen, GMO and residual-solvent papers are in the folder. - Metal results have been converted to the finished dose. - The status of the exact salt is recorded, with the free acid recorded separately. - Label and claim wording have been reviewed for the destination. - Quotation, specification and certificate cite the same version. The certificate answers for the lot, the specification answers for the material, and the folder answers for the market. Keeping those roles distinct is what makes an audit survivable. ### 06 How to prove a lot is calcium HMB URL: https://nutrition.rainwoodbio.com/products/specialty/hmb/identity/ Reviewed: 2026-11-20 A calcium HMB lot is the calcium salt only when four checks agree. The paperwork must give the form and the CAS number; HPLC with infrared must identify the acid; calcium must match the stoichiometry; assay and loss on drying must account for the whole mass. No single line does that work. The calcium figure is the one most certificates print without the arithmetic behind it. In one lineIdentity is proved by agreement: HPLC and infrared name the acid, calcium names the salt, and the moisture figure closes the mass balance. ## Four questions, four kinds of evidence A datasheet can name the right material and still say nothing about the powder in the drum. The rows below are separate questions, and each needs its own measurement. Most disputes start because only the first row was answered. Calcium HMB identity, layer by layer | Layer | Question | Measurement | What it establishes | Paperwork | Which form is claimed? | Name, CAS number, formula | Nothing about the powder itself | Chromatography and infrared | Is the acid HMB? | HPLC retention time; IR bands | The molecule, not its salt | Calcium | Is the counter-ion calcium? | Complexometric titration or ICP-OES | The salt form | Mass balance | Is the powder diluted or wet? | Assay, loss on drying, ash | Whether one material explains all the numbers ## The calcium ratio: proving the salt One calcium ion balances two HMB molecules. In the anhydrous salt, C10H18CaO6, calcium is 14.6% by mass, and the mass ratio of HMB to calcium is 236.26 to 40.08, or about 5.9 to 1. Both figures follow from the formula, so either can be turned into a check on a certificate. The first consequence concerns the assay reference. The acid cannot exceed 86.1% of the salt's mass, so a figure of 98.0–102.0% can only be expressed as calcium HMB. A certificate that prints “HMB 99%” and leaves the reference open has produced an ambiguous number, and comparing it with another supplier's figure is meaningless until the reference is fixed. The second consequence concerns a low calcium result. The catalog window is 12.0–14.0%, and its top is close to theory. At its bottom the figure is 2.6 points under the stoichiometric value. Water inside the 5.0% loss-on-drying limit accounts for at most about 0.7 of a point, so moisture alone does not explain the gap. What remains points to a free-acid fraction, a carrier, a hydrated form or a different calcium stoichiometry, and calcium plus loss on drying plus ash is what tells those apart. A blend of salt and free acid is the case the assay misses. The HPLC measures the acid from both components, so the total can be built to sit inside the range while calcium falls in proportion to the free-acid share. Calcium sees the counter-ion, which is why it belongs in the identity file even where the specification lists it as an assay line. ## Diffraction and the solid state Diffraction looks at the crystal, not at the percentage. A diffractogram records the crystalline phases present and compares their spacing with a reference pattern, so it can separate the anhydrous salt from a hydrate, and either from an amorphous carrier used to dilute a powder. It measures neither purity nor the counter-ion; it identifies the solid form. Before accepting a “match” statement, ask which reference pattern was used and what the detection limit is. On a disputed lot, diffraction alongside calcium, HPLC and infrared is worth more than any of them alone, because each answers a different row of the table above. Diffraction is not a release test here, and a certificate that says only “XRD conforms” without the pattern has told the buyer almost nothing. ## What substitution looks like Calcium HMB substitutions and the signals | Substitute | What changes | Signal | Test | HMB free acid | Calcium absent; acidic liquid or an adsorbed powder | Calcium low; pH low; poor flow | Calcium, pH, appearance | Leucine | Low-cost amino acid with a similar name | Nitrogen present where HMB has none | Nitrogen determination, HPLC | Carrier diluent | Active mass reduced | Assay low, calcium low, ash or moisture shifted | Mass balance, calcium | Another calcium salt | Calcium without HMB | Calcium high against the assay | HPLC and infrared, calcium | Moisture | Loss on drying raised | As-is assay low; dried-basis assay normal | Loss on drying Appearance is the weakest signal of the set. White to off-white covers a wide range, and a blend can be milled to look the same. The strong signals are calcium, nitrogen and the mass balance. A certificate that gives appearance and assay but no identity line has left the most likely substitution untested. ## Identity clauses for the specification - “Calcium β-hydroxy-β-methylbutyrate, CAS 135236-72-5, C10H18CaO6.” - “Assay 98.0–102.0% by HPLC, expressed as calcium HMB, with the basis stated.” - “Calcium 12.0–14.0% by complexometric titration; report the method.” - “Identification by HPLC retention and infrared spectrum; report the reference used.” - “Loss on drying ≤5.0%; particle size ≥95% through 80 mesh.” - “No free acid or diluent above the agreed limit; no nitrogen above the method limit.” Two clauses carry the identity work: the assay reference and the calcium method. Take them out and a certificate can still be internally consistent without ever describing a salt. ## Questions to put to the supplier - What form is this lot, and what CAS number does the certificate carry? - Does the assay refer to HMB or to calcium HMB, and on what basis is it calculated? - What is the calcium figure, by which method, and what loss on drying sits beside it? - Will you send the HPLC chromatogram with the detector named, and the infrared spectrum? - On a disputed lot, will you join a re-test of the retained sample? Answered directly, those five give a buyer an identity file; an assay percentage alone does not. Catalog values are on the product hub, each figure is placed on the COA page, the grades page sets the salt against the free acid, the diffraction note explains the solid-state test, and the quality page describes the release file. ### 01 What the COA for selenium glycinate actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/selenium-glycinate/coa/ Reviewed: 2026-11-20 Selenium glycinate is released on total selenium by ICP-MS, glycine by HPLC with the chelate ratio, appearance, loss on drying, heavy metals, microbiology and particle size. The catalog sets selenium at 1.0–2.0%, a conforming glycine ratio, loss on drying ≤5.0% and ≥95% through 80 mesh. A useful certificate pairs every parameter with the method that produced it, the limit it was released against and the result for that pack. In one lineThe selenium figure shows how much of the element is in the lot; the glycine ratio and the speciation show whether it is a chelate, and a certificate needs all three. ## What the certificate reports A certificate is only as good as its weakest line. Each entry should identify the test, the method behind the number and the limit that applied, so a reviewer can follow the reasoning without calling the supplier. A row that reads “conforms” gives a verdict and withholds the basis for it. The selenium line measures the element. The glycine line measures the ligand, and even a good glycine figure is a count rather than a species test. The identification line refers to whatever reference method the specification names; it does not, by itself, show that this lot matches it. Identity, selenium, ligand and contaminants · selenium glycinate | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | Selenium and glycine against the reference | Conforms | Selenium | ICP-MS | 1.0–2.0% | Glycine (chelate ratio) | HPLC | Conforms to the agreed ratio | Loss on drying | Gravimetric | ≤5.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh Two rows often carry less than they promise: “identification: conforms” without the reference, and “glycine: conforms” without the number behind the ratio. ## Selenium basis, glycine basis and the ratio The selenium result can be reported as received or after drying, and the certificate must say which. A 1.5% figure with 3.0% loss on drying becomes 1.546% on the dried basis. That is only 0.046 points, but it is 3% of the value, and the glycine ratio moves with it. Mixing an as-is selenium figure with a dried-basis glycine figure produces a number that means nothing. Before the ratio can be checked, three things must be fixed: the selenium basis, the glycine basis, and whether the glycine is total or free. Total glycine covers the ligand plus anything the carrier contributes; free glycine is the uncomplexed part. The ratio is a molar calculation on the bound fraction, so total glycine alone does not supply it. On the selenium side, the digestion and the isotope belong in the method note; neither tells you whether the element is chelated. ## The gate and the measured value Each specification line has a limit set in advance and a result measured afterwards. They answer different questions, and they belong in separate columns. A result column that simply repeats the catalog range has said nothing about the lot. What the result column should contain | Parameter | Release limit | Result column | Selenium | 1.0–2.0% | A measured percentage, with the basis and the digestion stated | Glycine ratio | Conforms | The measured glycine figure and the calculated molar ratio | Loss on drying | ≤5.0% | A measured percentage | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot | Particle size | ≥95% through 80 mesh | The measured percentage through the sieve The conclusion “passes specification” should be visible in the numbers: one figure per metal, a count plus an absence statement for microbiology, a measured percentage through the sieve. A single “heavy metals: conforms” entry conceals which element was high. ## Batch-to-batch variation The selenium window is deliberately broad. 1.0–2.0% is a two-fold range, so two compliant lots can differ by 100% in selenium per gram. That follows from a chelate whose load depends on the reaction and the carrier rather than on one formula. The weigh-up must use the lot value; a formula built on the midpoint is exposed at both ends. Moisture follows the pack and the season. A drum opened in a humid room takes up water, the as-is selenium figure falls, and the powder starts to cake. Sieving and milling shift the particle-size line while the chemistry stays put. Colour is the least quantitative row: white to off-white is a wide window, and a pink or grey cast points to a different problem rather than a slightly different shade. Look at the direction of travel across lots rather than one value near a limit: selenium falling, moisture rising, or a new peak in the glycine run. The lot code should follow the material into the pouch, the drum and the retained portion. ## Independent testing An outside laboratory is worth engaging at four moments: a new source, a first shipment into a regulated market, a label that depends on the chelate, or a contested result. The panel should cover total selenium by ICP-MS, speciation by IC-ICP-MS or HPLC-ICP-MS for selenite and selenate, glycine with the free fraction, loss on drying, metals and microbiology. Speciation is the gap in a routine certificate. Total selenium cannot separate a chelate from a physical blend of sodium selenite and glycine, and a blend is a direct way to hit the same figure. Ask for the extraction, the species calibrated and the limit of quantification; “selenite not detected” without a limit describes the method, not the lot. Keep the chain of custody intact: test the portion that was retained, and make sure the report names the lot. If a result is disputed, send the referee the retained portion, the certificate and the specification, and ask for the tests that separate bound from inorganic selenium rather than another total-selenium figure. ## Choosing between suppliers Six lines are enough to compare two offers: the selenium value and its basis; glycine total, free and the calculated ratio; whether speciation was run; the carrier and how it is declared; loss on drying; and the pack with its lot code. If two offers match on selenium but not on carrier or speciation, they are not the same material. Traceability is the second layer: who made the lot, which selenium source and ligand were used, and what carrier and drying step followed. The catalog specification is published on the selenium glycinate page; the speciation tests are explained on the identity page; the carrier and presentation choices on the grade page; the ICP-MS method in the ICP-MS note; and the release route on the quality page. ### 02 Selenium glycinate grades: selenium load, carrier and mesh URL: https://nutrition.rainwoodbio.com/products/minerals/selenium-glycinate/grades/ Reviewed: 2026-11-20 Selenium glycinate is supplied as a white to off-white powder at 1.0–2.0% selenium, ≥95% through 80 mesh, with granulation on request. The grade decision is the selenium load, the carrier and the mesh; the load is what changes the weigh-up, the blend uniformity and the number on the label. In one lineThe grade is the selenium load and the carrier: at 1.0–2.0% selenium the powder is mostly ligand matrix and carrier, and the label follows the declaration. ## Why the load is low and the window is wide The commercial material is a low-load chelate, not a single crystalline molecule with a formula that fixes the selenium percentage. The selenium figure depends on how much of the complex was formed and how much carrier was used to make a powder that flows, weighs and disperses. That is why the catalog window is 1.0–2.0%: two conforming lots can differ by a factor of two in selenium per gram. The window is a specification, not a quality grade. A lot at 1.0% is not a lower grade than a lot at 2.0%; it is a different load of the same chemistry, and the formula has to be built on the value in the certificate. A buyer who takes 1.5% as “the” figure and ignores the lot value will be wrong at both edges. ## Presentations and the sources beside them Selenium glycinate presentations | Presentation | Selenium | Particle size | Typical use | What changes | Standard powder | 1.0–2.0% | ≥95% through 80 mesh | Capsules, tablets, powder blends | The catalog presentation | Granulated | 1.0–2.0% | On request | Flow and dust control | Particle profile and bulk behaviour Granulation is a physical change: the chemistry and the selenium figure stay, while the particle profile and the flow move. It is not a drop-in for the standard powder without a specification revision, and the sieve result on the certificate belongs to the granulated article, not to the powder. The source decision sits beside the presentation decision. L-Selenomethionine is a single amino acid at 39.0–41.0% selenium, selenium yeast is a matrix at 1,800–2,200 mg/kg, and sodium selenite is an inorganic salt at 44.0–46.0%. Those are different ingredients, not grades of this one; the chelate comparison is worked through on the selenium glycinate and selenomethionine page. ## Powder, solution and handling The powder is white to off-white and free-flowing at 80 mesh. It dissolves in water to a clear solution, which is a useful observation but not a release test: a haze can mean an insoluble carrier, and a pink or grey tint can mean elemental selenium rather than a shade of white. The material is hygroscopic, so the 5.0% loss-on-drying limit is a release gate and an in-use warning at the same time. Granulation improves flow and reduces dust, which matters on a capsule line and in a low-dose blend. It does not change the selenium figure, but it changes the bulk behaviour and may change the uniformity result. The 1.0–2.0% window is already a low selenium per gram, so the powder is normally used as a premix rather than diluted further. ## The dose arithmetic and the label The selenium figure connects the label to the weigh-out. At 1.0% selenium, a 55 µg dose is 5.5 mg of material; at 1.5% it is 3.67 mg; at 2.0% it is 2.75 mg. The same arithmetic at 200 µg gives 20 mg, 13.3 mg and 10 mg. These are small masses, which is why the material is usually handled as a premix rather than weighed into a capsule blend directly. One check is worth doing before any trial: a 500 mg capsule filled with the powder at 1.5% selenium would carry 7.5 mg of selenium, about 29 times the EFSA tolerable upper intake level of 255 µg/day for adults. The figure is a hazard reference, not a permitted maximum, and the arithmetic is the point: this is a premix ingredient, not a capsule fill on its own. The label declares selenium in micrograms against the 55 µg reference intake, and the ingredient list names the source. The carrier is an ingredient, and the selenium figure on the label is calculated from the article as supplied. The weigh-up uses the lot value, and the overage, if any, belongs to the brand's formulation and stability work. ## What to write into the specification - “Selenium glycinate, white to off-white powder; carrier and presentation declared.” - “Selenium 1.0–2.0% by ICP-MS, with the basis, the isotope and the digestion stated.” - “Glycine by HPLC with the free fraction; the chelate ratio and its calculation reported.” - “Loss on drying ≤5.0%; particle size ≥95% through 80 mesh.” - “Heavy metals and microbiology as listed; speciation on request.” - “The presentation — powder or granulated — and the pack named.” ## When this grade is the wrong choice If the label needs a single defined molecule, a specific rotation and a named entry on the EU permitted-forms list, the amino acid is the better fit: L-selenomethionine is listed and this chelate is not, as of this review. If the formula needs a higher selenium density to keep the premix mass down, the same applies. If the market file already names selenium yeast or sodium selenite, changing source is a relabelling project, not a grade change. The chelate is the right choice when the label and the market route are built around it, when a water-soluble organic selenium source is wanted, and when the carrier and the presentation are declared. The catalog specification is on the product hub; the certificate lines are on the COA page; the market question is on the compliance page; the identity tests are on the identity page; the amino acid's specification is on the L-selenomethionine page; the release workflow is on the quality page. ### 02.1 Selenium glycinate vs selenomethionine: the form and the label URL: https://nutrition.rainwoodbio.com/products/minerals/selenium-glycinate/grades/selenium-glycinate-vs-selenomethionine/ Reviewed: 2026-11-20 Selenium glycinate is a chelate specified at 1.0–2.0% selenium, with glycine as the ligand and a carrier that makes up most of the powder. L-Selenomethionine is a single amino acid at 39.0–41.0% selenium, CAS 3211-76-5, with a specific rotation and a named entry on the EU permitted-forms list. The two deliver the same element, but the material per dose, the identity tests and the label are different. In one lineSelenium glycinate is a chelate specified at 1.0–2.0% selenium; L-selenomethionine is a single amino acid at 39.0–41.0% selenium, and the difference reaches the label, the weigh-up and the market file. ## A chelate and a molecule L-Selenomethionine is a defined compound: selenium replaces the sulfur of methionine, the formula is C5H11NO2Se, and the L form rotates polarised light. Selenium glycinate is a complex of selenium with glycine on a carrier; the catalog lists no CAS number or formula for it, because the selenium load and the carrier are set by the specification rather than by one structure. That is the first difference, and it drives the rest. Selenium glycinate and L-selenomethionine · specification comparison | Property | Selenium glycinate | L-Selenomethionine | Article | Chelate of selenium with glycine on a carrier | Single seleno-amino acid | CAS number | — (not assigned in the catalog) | 3211-76-5 | Formula | — (no formula in the catalog) | C5H11NO2Se | Selenium | 1.0–2.0% by ICP-MS | 39.0–41.0% by ICP-MS | Identity basis | Glycine ratio and speciation | Assay, IR, specific rotation | Appearance | White to off-white powder | White to off-white crystalline powder | Specific rotation | Not applicable | +17.0° to +19.5° | EU permitted-forms list | Not named, as of this review | Named in Annex II The last row is the one that decides markets for a supplement. The EU list is form-specific, and a chelate is not covered by the amino acid's entry. The US route is a lawful basis for the exact dietary ingredient, and that basis has to be established for each form rather than inferred from “selenium”. ## The same element at a different concentration The concentration gap is the practical difference. One gram of selenium needs 50–100 g of the 1.0–2.0% chelate, but only about 2.44 g of L-selenomethionine at 41.0%. Put the other way, a gram of the chelate carries 10–20 mg of selenium, while a gram of the amino acid carries about 400 mg. Material mass required for a selenium dose | Selenium dose | Glycinate 1.0% | Glycinate 1.5% | Glycinate 2.0% | L-Selenomethionine (40% Se) | 55 µg | 5.5 mg | 3.67 mg | 2.75 mg | 0.14 mg | 100 µg | 10 mg | 6.67 mg | 5 mg | 0.25 mg | 200 µg | 20 mg | 13.3 mg | 10 mg | 0.50 mg Both materials are premix ingredients at these masses, not capsule fills on their own. A 500 mg capsule of the chelate at 1.5% would carry 7.5 mg of selenium, about 29 times the EFSA tolerable upper intake level of 255 µg/day for adults. The amino acid carries more selenium per gram still. The dose arithmetic is the first thing to redo when a formula changes source. ## The identity tests are not interchangeable L-Selenomethionine is proven by its assay, its infrared spectrum, its specific rotation and its selenium figure against the stoichiometry. The rotation separates the L form from the D form and a racemate; the selenium figure, at 40.27% of the molecule's mass, catches a dilution or a sulfur analogue. None of those tests says anything useful about a chelate, which has no single enantiomer and no fixed selenium fraction. The chelate is proven the other way: total selenium, glycine with the free fraction, the calculated ratio, and speciation for the inorganic fraction. A “selenium 1.5%” certificate can describe a blend of sodium selenite and glycine; a “selenium 40%” certificate can describe a racemic amino acid. One number is not an identity for either product, and a certificate written for one form cannot be read as if it were the other. The methods are described in the methods library; the chelate's tests are worked through on the selenium glycinate identity page, and the amino acid's on the L-selenomethionine identity page. ## What the label has to name The nutrition panel declares selenium in micrograms; the ingredient statement names the source. In the EU, a food supplement must use a form named in Annex II to Directive 2002/46/EC. L-Selenomethionine is named; selenium glycinate is not, as of this review, so the chelate is not covered by the amino acid's entry. In the US, the Supplement Facts panel declares selenium and the ingredient statement names the form, and each form needs its own lawful basis as a dietary ingredient. The UK applies the GB list in Great Britain and the EU list in Northern Ireland. The brand name is not the ingredient name. “Selenium” alone describes the nutrient, and a pack that leaves the source generic does not match a file built around one form. A claim written for the amino acid does not transfer to the chelate, and the reverse is also true. ## The market file decides before the formula does For an EU food supplement, the permitted-forms list is the gate, and it currently favours L-selenomethionine. For a market where the chelate is accepted, the file has to carry the carrier declaration, the selenium basis, the glycine ratio and the speciation, because those are the points a reviewer will test. The US asks a different question: whether the exact form has a lawful basis for the intended use, and the buyer's team confirms it for the finished product. If the same SKU is sold in several markets, the source has to satisfy the strictest file, or the label has to differ by market. A single artwork with one ingredient name is not always possible, and the difference is easier to find before the print run than after it. ## When to choose which Choose L-selenomethionine when the market is the EU supplement market, when the label needs a defined molecule with a rotation, when the formula needs a high selenium density, or when the existing file already names the amino acid. Choose selenium glycinate when the market route is confirmed for the chelate, when a water-soluble organic source with a declared carrier is wanted, and when the label, the stability arm and the dossier are built around it. A switch is a new product, not a substitution. The weigh-up changes by a factor of about 20–40, the identity tests change, the label changes and the market file is rebuilt. The selenium glycinate hub carries the catalog specification; the grade page covers the carrier and the presentation; the compliance page sets out the source question; the L-selenomethionine page gives the amino acid's specification; the quality page covers the release workflow. ### 03 Selenium glycinate is hygroscopic; the pack decides the shelf life URL: https://nutrition.rainwoodbio.com/products/minerals/selenium-glycinate/stability/ Reviewed: 2026-11-20 Selenium glycinate is hygroscopic: the powder keeps its selenium figure while it stays dry and sealed, and it loses that condition quickly in an open pack. The clear solution is a use format, not a storage format. Light, heat and moisture decide the shelf life of the powder, and the pack decides how well those three are controlled. In one lineThe powder keeps while it stays dry and sealed; the clear solution is a use format, not a storage format. ## The powder: moisture first, light and heat second Loss on drying is capped at 5.0% in the catalog, which is both a release gate and a warning about storage. A 1.5% selenium powder that takes up 3% water reads about 1.455% as-is while the dried-basis figure stays at 1.5%; the selenium has not gone anywhere, but every weigh-up built on the as-is value is now low. The same water makes the powder cake, slows flow on a capsule line and can leave a film on the punch. Light matters less for a white powder, but white reflects visible light rather than ultraviolet, and an opaque pack is a simple precaution. Heat speeds moisture migration inside the pack and the caking that follows. A pallet parked in a hot loading bay is not the same storage condition as a cool warehouse, even when the certificate is identical. ## The solution: clear, but not a stock format The powder dissolves in water to a clear solution, which suits a stick pack or a beverage. Once dissolved, the complex loses the protection of the solid state: the ligand can exchange, the complex can dissociate, and pH and heat act on the species. A total-selenium result on the solution does not show whether the selenium is still bound. When a liquid is the only route, keep it in the dark, hold it at a pH validated for the complex, keep oxygen low and prove the hold time before the fill. Speciate the selenium at the beginning and at the end of that hold rather than testing total selenium alone. Nothing measured on the powder transfers into a beverage: the drink's matrix, its process and its container each set a different rate of loss. ## What moves the material in storage Factors that move selenium glycinate during storage | Factor | What it does | Control | Moisture | Water uptake; caking; lower as-is selenium | Sealed pouch; dry store; desiccant where needed | Heat | Faster moisture movement and ligand breakdown | Controlled store; cool process | Light | UV exposure of the ligand and the selenium centre | Opaque or foil pack; dark store | pH in solution | Ligand exchange; the complex can split | Buffer and validate the hold time | Oxygen and oxidants | Ligand oxidation; species shift | Low headspace; sealed pack; process control | Metal ions | Competing ligands in solution | Avoid iron and copper contact | Microbial load in solution | Growth during an aqueous hold | Preservative or validated chill and hold The factors reinforce one another. A hot, damp, bright store is worse than three separate stresses, and a neutral solution in clear glass brings most of them together. The real question is not whether the material is stable in the abstract, but how long it holds in a named pack under a named condition. ## Designing the stability study A study is only useful if it names the pack, the condition, the time points and the tests. For warehouse coverage, use 25 °C/60% relative humidity for the long term and 30 °C/65% for the intermediate arm; stress the pack at 40 °C/75%. Add a light-exposure arm, because a dark incubator cannot see that failure. At each point, measure selenium by ICP-MS, glycine total and free, loss on drying, appearance and microbiology. Where the claim depends on the chelate, add speciation at the first and last points; a total-selenium figure will not reveal a complex that has split. Report the individual values, and name the pack and the lot family. Buy the pack the study describes. A drum and a pouch differ in surface-to-volume ratio, headspace and how often they are opened, so a result from one does not describe the other. ## How the dosage form changes it A capsule or tablet begins dry, but the shell and the excipients can still pass moisture into the fill; check loss on drying at release and again after storage. A hygroscopic fill may stick to the punch and slow the line, and granulation can help the flow without altering the chemistry. A stick pack fails at the seal first: a pinhole is enough, so inspect the strip as well as the powder. A beverage brings pH, heat, oxygen and light together, and a chelate can come apart in the can. Bulk stability is the beginning of the answer, not the answer. An overage is a label and stability decision; it cannot fix a leaky pack or restore a species that has separated. ## Setting the retest period No single shelf-life value applies to selenium glycinate, because the container and the storage condition are part of the answer. A retest period is written onto the specification only where a stability file exists for that exact presentation. A duration quoted without the pack, the condition and the test panel is a marketing statement, not a shelf life. Once the retest period ends, re-assay the retained portion before extending use. Do not extend by default, and do not apply a bulk result to a container that has been repacked. The product hub shows the standard packs; the COA page sets out the release tests; pack sizes and lead times sit on the MOQ page; the ICP-MS note explains the selenium assay; the quality page describes the release work. ### 04 Selenium glycinate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/selenium-glycinate/moq/ Reviewed: 2026-11-20 Selenium glycinate starts at 1 kg, packed in a foil pouch; production quantities go into a 25 kg fiber drum. Standard powder ships in 1–7 days. To quote firmly, we need six things: the presentation and carrier, the selenium specification, the quantity and pack, the destination and Incoterm, the documents, and the market. In one lineOne kilogram is the smallest pack we can sample, test and trace as a lot, and at 1.0–2.0% selenium it is a qualification unit rather than a production quantity. ## Why 1 kg is the minimum A kilogram is enough for a bench trial, a retained portion and an independent identity run, and it travels as a parcel rather than a pallet. It also carries a single lot code, so the pouch, the certificate and the retained portion stay linked without a repack. Splitting below 1 kg usually means taking material from a larger lot, which adds handling and breaks that link. The amount behind the pack is easy to underestimate. At 1.5% selenium, 1 kg carries about 15 g of the element, or roughly 272,000 doses at 55 µg and 75,000 at 200 µg. At 1.0% it carries 10 g; at 2.0%, 20 g. One kilogram is a qualification and trial quantity, not a production order, even though it is the smallest unit we sell. ## Packs and presentations Packs for selenium glycinate | Pack | Fill | First use | Handling | Heat-sealed foil pouch | 1 kg | Trial and retained portion | Keep sealed; reseal tightly after opening | Fiber drum with liner | 25 kg | Production | Record the opening date; keep the liner closed The catalog article is a powder passing 80 mesh. A granulated version is a separate specification rather than a different bag: it changes the sieve line, the flow and the dust, and it may add time to the quotation. Ask for it before the order is fixed, because the change can move both the specification and the dispatch date. ## Dispatch and lead time A standard pack is quoted at 1–7 days after the order is confirmed. The clock covers picking, the documents and dispatch, not the freight, the customs clearance or the customer's own release. A granulated or non-standard pack takes longer, and the extra time should appear as a separate line on the quotation. Ask for a dispatch date, not just the range. A pouch leaves as a parcel; a drum leaves on a pallet. The Incoterm decides who books the movement and who clears it, and the lot documents should travel with the goods rather than follow them. ## What the quotation must state A quotation can be compared only if it states six things: - Product and presentation. Selenium glycinate, with the carrier and the particle size named. - Specification. Selenium range and basis, glycine ratio and free glycine, loss on drying, metals and microbiology. - Quantity and pack. A 1 kg pouch, a 25 kg drum, or the granulated form. - Destination and Incoterm. The delivery country or port, the address, and the trade term. - Documents. The COA, the specification, the SDS and any statement the importer needs for the destination. - Intended use and market. Whether the material goes into a supplement, a food or another application, and where that product will be sold. A quotation that says only “selenium 1.5%” is incomplete, because it leaves the carrier, the basis and the market open. The same selenium figure can describe a different powder when the carrier changes, and the paperwork is part of the offer. Commercial terms are not published here; they belong on the quotation. ## The qualification sample The 1 kg pack is the qualification unit. Run selenium, glycine with the free fraction, loss on drying, microbiology and speciation before scaling, and hold back a portion from the same pack. The lot code should connect the sample, the COA and the quotation; without that link the material is a demonstration, not a qualified source. A trial needing less than a kilogram is a repack of a larger lot, not the catalog pouch. It acquires its own handling record, and it cannot be presented as the 1 kg foil pack. Put the split in writing and keep the repack's lot code beside the trial results: the bench powder and the production drum may come from different lots even when both meet the same specification. ## Terms to settle first Put the commercial and quality terms on one page: the Incoterm, the pack, the dispatch window, the specification revision, a COA per lot, the retained portion, the retest period and the change route. Agree them in a quality agreement before the first production order; the same discussion is much harder once a dispute exists. If a lot fails the agreed specification, the evidence is the retained portion and a joint re-test by the named method, not a photograph of the drum. Name the referee laboratory, and say who pays for it, before it is needed. A return based on appearance alone is difficult to defend at either end. The catalog specification is on the product hub. The COA page lists the release tests, the compliance page covers the market files, the MOQ entry defines the term, the logistics page covers movement and documents, and the quality page describes release. ### 05 The regulatory file for selenium glycinate URL: https://nutrition.rainwoodbio.com/products/minerals/selenium-glycinate/compliance/ Reviewed: 2026-11-20 Selenium is a permitted nutrient in the EU and the US, but a permitted nutrient is not a permitted source. The specification and the lot certificate describe the material; the destination decides whether the chelate may be used, at what dose, and under which label. This page sets out the four checks and the documents behind them. The buyer's regulatory team confirms the route for the market on the pack. In one lineSelenium is a permitted nutrient, but a permitted nutrient is not a permitted source: the form must appear on the destination's list before the label names it. ## Four checks, one file A regulatory file is not a certificate with a cover letter. It is a set of consistent answers: the article on the specification, the results on the lot COA, the route the destination allows, the dose in the finished product and the wording on the pack. One weak link makes the rest unverifiable. The nutrient, the source and the label are three separate questions. A file that says “selenium” has named the nutrient but not the ingredient; a file that names selenium glycinate has named the ingredient but not established that the market accepts it. ## The EU route Directive 2002/46/EC lists the vitamins and minerals permitted in food supplements in Annex I and the permitted forms in Annex II. Selenium is in Annex I. Annex II names L-selenomethionine alongside selenium-enriched yeast, selenious acid, sodium selenate, sodium hydrogen selenite and sodium selenite. As of this review, selenium glycinate is not one of those entries, so a food supplement sold in the EU cannot rely on this chelate as a listed source. The route has to be established before the label is written, and the buyer's team owns that decision. Other routes are separate. A fortified food falls under Regulation (EC) No 1925/2006 and its own list of permitted forms; a form not used in the EU before 15 May 1997 also raises the novel-food question. Neither route is created by the certificate. The maximum selenium level in supplements is not harmonised: Member States set national limits, so the destination matters even when the source is accepted. The labelling rules are in Regulation (EU) No 1169/2011, with a selenium reference intake of 55 µg/day. EFSA's 2023 opinion set a tolerable upper intake level of 255 µg/day for adults; that is a hazard reference, not a permitted maximum. Contaminants fall under Regulation (EU) 2023/915, and claims under Regulation (EC) No 1924/2006 and Regulation (EU) No 432/2012. Check the current consolidated texts, because all of these can move. ## The US route In the US the first question is whether the exact form is a lawful dietary ingredient for the intended use. The route can be a pre-DSHEA marketing history, a GRAS conclusion or a new dietary ingredient notification under 21 CFR 190.6, and the supplier names the basis it relies on. “Selenium is a nutrient” does not establish the basis for a particular chelate. On the label, the Supplement Facts panel declares selenium in micrograms and as a percentage of the Daily Value, 55 µg; the ingredient statement names the source. The adult tolerable upper intake level used in the US is 400 µg/day. Manufacturing falls under the dietary-supplement cGMP in 21 CFR 111. There is no federal heavy-metal maximum specific to supplements; California's Proposition 65 and the finished-product dose can decide whether a warning is needed. ## Great Britain and Northern Ireland Great Britain applies a retained version of the EU food-supplement rules, with its own permitted-forms list and claims register. Northern Ireland applies the EU regime under the Windsor Framework, so a lot for Belfast follows the EU column. A UK launch can need two files, and the delivery address decides which one applies. ## Contaminant ceilings Heavy-metal limits · catalog specification and market ceilings | Element | Catalog limit | EU food-supplement ceiling | US federal | Lead | ≤3 mg/kg | 3.0 mg/kg | No general limit | Arsenic | ≤2 mg/kg | No harmonised limit; national rules | No general limit | Cadmium | ≤1 mg/kg | 1.0 mg/kg (3.0 for seaweed-based) | No general limit | Mercury | ≤0.1 mg/kg | 0.10 mg/kg | No general limit The catalog column is a raw-material limit; the EU column is written for the supplement as sold. They are not interchangeable. At a 200 µg selenium dose from a 1.5% powder, the material mass is about 13.3 mg, so a lead result at 3 mg/kg contributes about 0.04 µg of lead to the capsule. The excipients, the shell and the water are often larger contributors, and the finished-product calculation is still required. ## Claims and label wording No disease-related claim belongs on a selenium glycinate pack. In the EU, a claim must be on the authorised list and meet its conditions; the selenium claims attach to the amount of the nutrient in the finished product, not to the source. In the US, a structure/function statement must be truthful, substantiated and carry the DSHEA disclaimer. A claim written for L-selenomethionine does not transfer to the chelate. “Selenium” describes the nutrient; “selenium glycinate” describes the ingredient. A pack that names the nutrient but leaves the source generic does not match a file built around one form. Nothing on this page is a claim for the ingredient; the label sentence belongs to the brand's reviewer. ## The document pack The buyer's file needs the specification, a lot COA with selenium by ICP-MS, glycine and the free fraction, loss on drying, the metal panel and microbiology, plus the speciation result when the label relies on the chelate. Add the TDS, the SDS, allergen and GMO statements, the origin record, the carrier declaration and a residual-solvent statement. A statement of the regulatory status for the destination, and the change-control record for source, carrier and pack, complete the file. Every document should carry the lot code or point to it. A generic TDS and a lot-specific COA are not a matched pair unless article, carrier and pack agree. ## Pre-order checklist - The destination's permitted-sources list has been checked against the exact article. - The selenium dose per day, and the national maximum where one exists, are recorded. - Contaminant results are converted to the finished-product dose. - The label names the ingredient, and the claim wording has been reviewed for the market. - COA, TDS, SDS, allergen, GMO, origin and carrier statements are on file. - Source, carrier and pack are under change control, and the quotation matches the specification version. The product hub carries the catalog specification; the COA page explains the lot certificate; the identity page covers the analytical evidence; the L-selenomethionine page shows a listed source for comparison; the methods library describes the tests; the quality page describes the release file. ### 06 How we prove a selenium glycinate lot is the chelate URL: https://nutrition.rainwoodbio.com/products/minerals/selenium-glycinate/identity/ Reviewed: 2026-11-20 A selenium glycinate lot is the chelate when four measurements agree: the documentation names the article and the carrier, total selenium by ICP-MS gives the element, glycine by HPLC with the free fraction gives the ligand, and speciation shows whether the two are bound together. The mass balance then has to add up. At 1.0–2.0% selenium most of the powder is carrier, so the glycine ratio only becomes meaningful when the carrier is declared and the free glycine is subtracted. In one lineAt one to two percent selenium the element figure is the easy part; identity is the glycine ratio and the speciation that show the selenium is bound to the ligand rather than blended beside it. ## The identity layers Identity layers · what each proves and what it misses | Layer | Evidence | Proves | Misses | Document | Name, carrier, presentation, specification | What the lot is called | Everything about the drum | Element | Selenium by ICP-MS | How much selenium is present | Whether it is bound or inorganic | Ligand | Glycine by HPLC; free glycine | That the ligand is present and in what amount | Whether the ligand is bound to selenium | Speciation | IC-ICP-MS or HPLC-ICP-MS after a defined extraction | The fraction that is inorganic | The exact structure of the bound species | Mass balance | Selenium, glycine, loss on drying, carrier | Whether the numbers add up | Which carrier fraction is which The layers are independent by design. A blend of sodium selenite and glycine passes the document, element and ligand layers; only speciation separates it from the chelate. A chelate with free glycine added passes the document and element layers; the free-glycine figure catches it. ## The glycine ratio is a calculation, not a measurement The catalog line reads “glycine (HPLC): chelate ratio conform”, and that phrase hides two operations. HPLC measures a glycine figure; the ratio is calculated from it. A certificate that reports only “conforms” has not shown the figure, the basis or the arithmetic, and the reader cannot check any of them. The arithmetic is simple once the basis is fixed. Selenium is 78.97 g/mol and glycine is 75.07 g/mol. If the complex were 1:1, each gram of selenium would carry about 0.95 g of glycine; at 1:2 it would carry about 1.90 g. For a 1.5% selenium material, a 1:1 complex accounts for about 1.4% glycine and a 1:2 complex for about 2.9%. A total glycine figure far above that range is not evidence of more chelate; it is evidence of free glycine or a glycine-rich carrier. Total glycine and free glycine have to be reported separately. Subtract the free fraction, convert the bound glycine to moles, divide by the moles of selenium, and report the result with the calculation. If the carrier itself contains glycine, the total figure is uninformative without a blank run on the carrier alone. That is why the carrier belongs in the specification, not in a footnote. ## What XRD can and cannot add X-ray diffraction is a solid-state test, and at this selenium load the diffractogram is dominated by the carrier. An amorphous carrier gives a broad halo; a crystalline carrier gives its own pattern. XRD can show a carrier change, a crystalline phase and, above its detection limit, crystalline free glycine in a blend. It cannot show that selenium is coordinated to glycine, because the selenium is a minor component and the pattern belongs to the bulk. Infrared spectroscopy is the better ligand-side support: the carboxylate bands of a coordinated glycine shift against those of the free amino acid. The same matrix problem applies, and a carrier with strong bands can swamp the region of interest. Use FTIR as supporting evidence, not as the identity test. For XRD, ask for the reference pattern, the detection limit and the sample preparation; “XRD conforms” without them has added little. ## The routes that produce a false positive Adulteration routes and the test that catches each | Route | Why it appears | Caught by | Selenite or selenate blended with glycine | A readily available inorganic source that lifts the element figure | Speciation; inorganic selenium fraction | Selenomethionine diluted and renamed | A high-selenium organic source cut to 1–2% | Speciation; the selenomethionine peak | Selenium yeast blended in | An organic matrix with its own selenium | Protein and yeast markers; speciation | Free glycine added | Lifts the glycine figure without adding chelate | Free glycine; a blank on the carrier | Elemental selenium | A red or grey tint; an insoluble fraction | Appearance; a hazy solution; speciation | Carrier substitution | Changes selenium per gram and the label | Carrier declaration; loss on drying; mass balance The strongest single screen is speciation, because it is the only test that separates bound selenium from the inorganic salt. The second is the free-glycine figure with a carrier blank. A certificate that reports total selenium and total glycine but neither speciation nor free glycine has left the most likely substitutions untested. ## Writing the identity into the specification - “Selenium glycinate; carrier and presentation declared.” - “Selenium 1.0–2.0% by ICP-MS, with the basis, the isotope and the digestion stated.” - “Glycine by HPLC, total and free, with the chelate ratio and the calculation reported.” - “Inorganic selenium fraction by speciation, with the extraction and the limit of quantification.” - “Loss on drying ≤5.0%; particle size ≥95% through 80 mesh.” - “No added selenium source other than the declared one; change control for carrier and source.” ## Five questions to ask - What is the glycine figure, total and free, and what ratio does it calculate to? - What carrier is present, and was a blank run on that carrier? - Has speciation been run, and what fraction of the selenium is inorganic? - Which selenium source and ligand were used, and on what basis is the selenium result reported? - Does the XRD or FTIR report name a reference and a detection limit? Five direct answers amount to an identity file; one selenium percentage does not. The product hub carries the catalog specification; the COA page shows where each figure sits on the certificate; the grade page covers the carrier and the presentation; the comparison with selenomethionine shows how the identity tests differ; the methods library describes the separation; the quality page covers the release workflow. ### 01 What the COA for fermentation spermidine contains URL: https://nutrition.rainwoodbio.com/products/specialty/spermidine-fermentation/coa/ Reviewed: 2026-11-20 A fermentation spermidine COA needs to show appearance, HPLC and IR identity, assay, putrescine, loss on drying, the heavy-metal panel, microbiology and particle size. Each line needs a method, a limit and the value measured on that lot. The values on this page are the catalog specification; the certificate is what confirms a specific pouch or drum. In one lineA 98.0% HPLC assay is only half the story: the certificate also has to name the trihydrochloride salt, the detector behind the HPLC result and the putrescine figure measured on the same lot. ## What the certificate has to show A certificate is auditable when every row stands on its own. The reader should be able to see what was measured, how, against which limit, and what the laboratory found. This product is the trihydrochloride, so the salt name and CAS belong at the top; without them the assay percentage is ambiguous. The catalog form is a white to off-white powder at 80 mesh, assay ≥98.0% by HPLC, putrescine ≤0.5%. The putrescine line is what makes this a profile specification rather than a single-number assay. Putrescine is a neighbouring diamine, not another name for spermidine; the limit describes what the fermentation and purification left behind. Identity, assay and purity · fermentation spermidine trihydrochloride | Check | How it is measured | Release limit | Colour and form | Visual | White to off-white powder | Identity | HPLC retention plus IR | Matches the reference | Spermidine assay | HPLC | ≥98.0% | Putrescine | HPLC, related substances | ≤0.5% | Moisture | Loss on drying | ≤1.0% | Metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Micro | Plate count; absence tests | APC ≤1,000 cfu/g; yeast/mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve | ≥95% through 80 mesh The table is a specification, not a result sheet. The metal and micro rows are pass-or-fail at release, but the individual numbers still belong on the COA. A row that says only “conforms” gives a conclusion without the evidence. ## The salt, the detector and the assay basis The assay is a percentage of the salt as weighed unless the certificate says otherwise. Spermidine trihydrochloride is 57.0% spermidine by mass, so a 98.0% lot is about 55.9% spermidine. What remains is the chloride counter-ion and its proton, not a contaminant. At loss on drying ≤1.0%, an as-sold and a dried basis differ by at most about one point. That is small, but the certificate should still name the basis, and the purchase order should use the same convention as the specification. The HPLC method needs a detector that responds to an amine. Spermidine has no useful ultraviolet chromophore: a UV method implies derivatisation before injection, while a method without derivatisation needs mass spectrometry, evaporative light scattering or charged aerosol detection. A percentage without the detector cannot be judged. Identity is a pair: HPLC retention against a reference and an infrared spectrum, with the reference material named. ## Limit versus measured result One column states the boundary the lot had to meet; the other states what the laboratory found. Keeping them apart, with the method alongside, is what makes a certificate auditable. If the result column repeats the range, the reader has been given the gate again rather than a measurement. What the result column should contain | Check | Limit | What the result should state | Spermidine assay | ≥98.0% by HPLC | The measured value, the basis and the detector | Putrescine | ≤0.5% | The measured value, the method and the quantification limit | Moisture | ≤1.0% | The measured value | Metals | Per element | The measured mg/kg for each element | Micro | Counts and absence | The count and the absence result for the lot | Particle size | ≥95% through 80 mesh | The measured percentage passing the sieve Putrescine should be reported as a number. Results of 0.1% and 0.45% would both meet the 0.5% limit, but they describe different powders to a customer watching the profile. The result should carry the method and the limit of quantification; a “less than” value with no limit says more about the method than the sample. Loss on drying works the same way: results of 0.2% and 0.9% both pass, but the second is closer to the caking an opened pouch will show. ## What changes between fermentation lots Fermentation is a biological process, so the profile shifts between campaigns even when the specification does not. Assay and putrescine track the strain, the medium and the purification; loss on drying tracks the drying and packing room; the 80 mesh result tracks milling and sieving. Colour is the least quantitative line. White to off-white is a wide window, and a lot inside it is not an identity failure. A darker lot can point to a longer hold, a different drying step or moisture pickup while the assay still passes. Look at the batch record and the trend before rejecting on colour. Watch the direction across lots rather than a single value near an edge: putrescine moving toward 0.5%, loss on drying rising, or an extra peak in the related-substance window. The code on the COA, the pouch, the drum and the retained sample should be one code. ## When to order an outside test Order an outside test when the source is new, when the first delivery enters a regulated market, when the fermentation claim is disputed, or when putrescine sits close to 0.5%. The panel can be narrow: related substances by HPLC, IR, loss on drying, chloride, ICP-MS and a micro count. Chloride is the direct check on the salt. The trihydrochloride is about 41.8% chloride by mass; a low figure points to the free base, a blend or a different salt. Chloride is not a routine line in this catalog specification, so it is an additional test. The source claim does not come from the assay. A fermentation-derived lot and a lot made by another route can give the same peak, so the source rests on the manufacturing description, the fermentation declaration and the supply-chain record. Ask for those papers with the sample, and keep the retained sample under the same lot code. ## What to compare between suppliers Compare six items side by side: both CAS numbers (trihydrochloride 334-50-9, free base 124-20-9), the assay with detector and basis, putrescine with its quantification limit, moisture, the 80 mesh result, and the metal and micro panels. If two quotations match on 98% but not on the salt form or the putrescine figure, they are different powders. Traceability comes next. The certificate should name the manufacturer, the fermentation source and the packing site, and the code should run from the pouch to the retained sample. A valid certificate for the wrong drum is still the wrong certificate for the shipment. The catalog specification is on the fermentation spermidine product page. The grade differences are on the grades page, the identity tests on the identity page, the analytical methods in the methods library, and the release workflow on the quality page. The pure free base is a separate article, described on the spermidine product page. ### 02 Fermentation spermidine, free base or wheat germ: choosing the article URL: https://nutrition.rainwoodbio.com/products/specialty/spermidine-fermentation/grades/ Reviewed: 2026-11-20 Fermentation spermidine is supplied as the trihydrochloride at ≥98.0% by HPLC, with putrescine ≤0.5% and an 80 mesh powder. Two other articles share the name: the free base and the spermidine-rich wheat-germ extract. They differ in salt fraction, spermidine per gram, allergen status and regulatory file, so the article has to be chosen before the label is written. In one lineThe grade fixes how much spermidine one gram of powder carries: about 559 mg for the 98.0% trihydrochloride, about 985 mg for a 98.5% free base, and 0.8–2.4 mg for the authorised wheat-germ extract. ## Three articles under one name The fermentation route makes spermidine and converts it to the trihydrochloride, a crystalline salt that is easy to dry, mill and blend. The free base is the same molecule without the chloride, a low-melting solid with its own specification. The wheat-germ extract is made from non-fermented wheat germ and sold on its spermidine content in milligrams per gram, not on a percentage of the molecule. The source belongs in the grade. This specification has no wheat-derived carrier, while the extract route is built on wheat germ and brings the cereal allergen question with it. A quotation that says only “spermidine 98%” has not named the article, the salt or the source. None of the three is a purer version of another. The salt is a different chemical entity from the free base, and the extract is a food-derived mixture with its own authorised description. ## How the articles compare Spermidine articles compared by the gram | Article | Claim on the pack | Spermidine in 1 g | What the claim describes | Fermentation trihydrochloride | ≥98.0% HPLC | About 559 mg | The salt, 57.0% of which is free base | Free base | ≥98.5% GC or HPLC | About 985 mg | The molecule as sold | Wheat-germ extract | 0.8–2.4 mg/g | 0.8–2.4 mg | Content of the authorised extract The table is arithmetic, not a ranking. The fermentation salt gives about 559 mg of spermidine per gram, the 98.5% free base about 985 mg, and the extract at most 2.4 mg. The salt carries more than two hundred times the spermidine of the extract at the top of its range, which is why the same milligram claim produces very different packs. The salt figure is not a purity failure. A 98.0% trihydrochloride is a high-purity salt, and the rest of its mass is chloride and proton. Calling it 98% pure and 55.9% spermidine are both correct; using one number without the other is where a label or a weigh-up goes wrong. ## What the powder is like to handle Fermentation spermidine trihydrochloride is a white to off-white powder, freely soluble in water, and the solution is acidic. It is hygroscopic, so the pack and the storage condition belong in the specification rather than in a note added later. The catalog powder is 80 mesh: ≥95% through 80 mesh, finer than the 40 mesh often used for the free base. The finer powder disperses quickly, but it carries more dust and a larger surface for moisture pickup. A granulated form is available on request when the line needs flow or less dust; that is a new particle-size specification, not a packing choice, and it should be quoted as one. The free base can arrive crystalline or as a melt and needs a defined handling temperature; a warm journey can change its physical form without changing the assay. The extract is a larger mass of powder with its own carrier, colour and water content. Content uniformity, not solubility, is the practical issue for the extract, because the active sits at a low level in a large powder mass. ## What the grade does to the dose The article decides the mass per serving. For a label that declares 5 mg of spermidine, the 98.0% trihydrochloride needs 5 ÷ 0.559 = 8.94 mg of powder; the 98.5% free base needs 5.08 mg; the extract needs 2.08 g at 2.4 mg/g or 6.25 g at 0.8 mg/g. Those are arithmetic examples, not a dose recommendation. At 8.94 mg the salt disappears into a capsule fill, and the excipients dominate the formulation. At two to six grams the extract becomes the dosage form: it fits a stick pack, a powder for dispersion or a multi-capsule serving, but not a single small capsule. A dilution or granulation of the salt can make a small dose weighable on a production line, but it changes the specification and the label has to declare it. The salt is the practical choice for a capsule, tablet or aqueous mix where the label declares spermidine. The free base is a different order, not a drop-in, and the extract is a different product concept rather than a stronger or weaker version of the salt. ## What to write into the specification - “Spermidine trihydrochloride, CAS 334-50-9 (free base CAS 124-20-9), fermentation-derived, ≥98.0% by HPLC with the detector named.” - “Putrescine ≤0.5% by HPLC, with the method and the limit of quantification stated.” - “Loss on drying ≤1.0%; particle size ≥95% through 80 mesh.” - “Identification by HPLC retention and IR against a reference.” - “Heavy metals and microbiology as listed; 1 kg foil pouch or 25 kg fiber drum.” - “Source declaration: fermentation-derived, with the manufacturing description and the allergen statement.” A specification that names the salt but not the source is incomplete for this product, because the source is part of the claim. A specification that names the source but omits the putrescine limit is incomplete too, because the profile is part of the grade. The certificate, label and purchase order should name the same form and use the same source wording. The fermentation spermidine product page holds the catalog specification. The source and label comparison with wheat germ is on the level-four comparison, the certificate lines on the COA page, the market route on the compliance page, and the pure free base on the spermidine product page. Analytical methods are in the methods library. The release workflow is on the quality page. ### 02.1 Fermentation spermidine vs wheat germ: source, profile and label URL: https://nutrition.rainwoodbio.com/products/specialty/spermidine-fermentation/grades/spermidine-fermentation-vs-wheat-germ/ Reviewed: 2026-11-20 Fermentation spermidine and wheat-germ spermidine are separate articles. The fermentation product is a trihydrochloride salt at ≥98.0% by HPLC, putrescine ≤0.5%, 80 mesh; the wheat-germ product is an extract at 0.8–2.4 mg spermidine per gram. One gram of the salt carries about 559 mg of spermidine, one gram of the extract at most 2.4 mg, so the dose mass, the allergen statement and the regulatory file all change with the source. In one lineThe source decides the article: a fermentation salt carries about 559 mg of spermidine per gram, the authorised wheat-germ extract 0.8–2.4 mg, and the label has to describe the one in the pack. ## Two sources, two articles Fermentation spermidine is produced by microbial fermentation, purified and converted to the trihydrochloride. The source is a process, not a molecule: the same spermidine can be made another way, and the assay cannot tell the routes apart. The source claim rests on the manufacturing description, the fermentation declaration and the supply-chain record. The wheat-germ route starts from wheat germ and makes an extract. It is a mixture sold on its spermidine content, and the Union list in Implementing Regulation (EU) 2017/2470 describes an extract of non-fermented wheat germ at 0.8–2.4 mg/g. The wheat germ is where the cereal allergen statement comes from, and the extract matrix is part of the article rather than an impurity to be minimised. Neither route is a purified version of the other. One is a salt of a single molecule; the other is a food-derived extract with its own authorised description. A purchase order that names only “spermidine” has not chosen either. ## The profile behind the percentage What one gram of each article carries | Article | Spermidine per gram | Source and profile | Fermentation trihydrochloride, ≥98.0% HPLC | About 559 mg | Putrescine ≤0.5%; no wheat-derived carrier in this specification | Wheat-germ extract, 0.8–2.4 mg/g | 0.8–2.4 mg | Extract matrix; wheat allergen statement; EU authorised range | Pure free base, ≥98.5% | About 985 mg | Different article, shown for comparison The profile is more than the assay. The fermentation specification caps putrescine at 0.5%, a neighbouring diamine that can co-elute on an HPLC method not built to resolve it; the extract carries spermidine at a low level alongside spermine and the rest of the matrix. Comparing a 98% salt with a 0.2% extract on one scale would describe neither article. The salt figure is not a purity failure. The trihydrochloride is 57.0% spermidine by mass, so a high-purity salt reads about 56% spermidine. The extract figure is already a content in milligrams per gram. Converting one into the other without the form and the source is where the dose arithmetic goes wrong. ## What the source does to the dose For a label that declares 5 mg of spermidine, the fermentation salt needs 5 ÷ 0.559 = 8.94 mg of powder; the extract needs 2.08 g at 2.4 mg/g or 6.25 g at 0.8 mg/g. Those are arithmetic examples, not a dose recommendation. The dosage form follows. A few milligrams fit a small capsule, and the excipients dominate the fill. Grams change the format: the extract suits a stick pack, a powder for dispersion or a multi-capsule serving, not a single small capsule. A dilution of the salt can make a small dose weighable on a line, but it is a declared specification and the label has to say so. The same arithmetic explains why the two articles are not interchangeable at one milligram claim. A formula built on 5 mg of extract delivers a fraction of the spermidine in a formula built on 5 mg of the salt, and a switch either way is a reformulation. ## What the label has to say In the EU, the Union entry gives the extract its own designation: it must be labelled as a spermidine-rich wheat germ extract, and the entry also carries the adult condition and the daily intake. The fermentation salt is a different article and cannot use that designation. Where it is lawfully used, it is named as the substance in the ingredient list, with the quantity per serving in the supplement panel. Annex II to Regulation (EU) No 1169/2011 lists wheat among the cereals containing gluten, so the extract route brings an allergen review. This fermentation specification has no wheat-derived carrier, so that declaration does not arise from the source; the source statement and the specification still belong on the label and in the file. In the US, the Supplement Facts panel gives the amount per serving and the ingredient list names the source. The label describes the article in the pack, not the article considered during development. A source change is an artwork change, not a purchasing detail. ## The regulatory file follows the source The EU entry for the extract is not a generic spermidine entry. It fixes the article, the 0.8–2.4 mg/g range and the conditions; a fermentation-derived trihydrochloride does not inherit it. The fermentation article needs its own route, confirmed by the buyer's regulatory team against the current consolidated text for the destination market. The UK does not have one file either. Great Britain applies the GB register and GB labelling; Northern Ireland follows the EU framework. The delivery address decides, and the file should record the route and the article together so that a later source change is visible as a regulatory change. A specification written for one article does not support a label written for the other. ## When to choose which Choose the fermentation salt for a capsule or tablet with a small declared dose, a market where the fermentation article has a route, a label that should not carry a wheat allergen, and a specification built on the salt, the putrescine limit and the 80 mesh powder. Choose the extract when the serving mass is already measured in grams, the label can carry the wheat statement, and the file is built around the authorised extract. A switch after the label is written is a change of product: content, allergen status, authorised designation and regulatory file all move. The fermentation product page holds the catalog specification. The grades page sets this comparison in the wider range, the compliance page covers the market route, and the identity page lists the tests that separate the articles. The methods library explains the techniques, the spermidine product page covers the free base, and the quality page the release workflow. ### 03 Fermentation spermidine: moisture, solution and shelf life URL: https://nutrition.rainwoodbio.com/products/specialty/spermidine-fermentation/stability/ Reviewed: 2026-11-20 Fermentation spermidine trihydrochloride takes up water, so an opened pouch can cake and lose flow. The sealed pack holds at ambient warehouse temperature; the acidic solution needs protection from oxygen, light and trace metals. Shelf life comes from data on the exact pack and matrix, not from the certificate. In one lineThe pack keeps the powder dry; the formula and the solution decide everything else, and the retest date belongs to the pack that was studied. ## The dry powder and the closed pack Loss on drying ≤1.0% sets the release limit; it is not a storage allowance. After the foil is cut, the powder draws moisture from the room: the loss on drying climbs and the as-is assay drops, and an 80 mesh powder can bridge in the hopper after a damp week. The trihydrochloride is crystalline and does not soften like the free base, so caking and flow loss are the physical risks rather than fusion. Keep the pouch sealed, in a dry room and off the floor. A desiccant can help in a humid climate; it cannot replace a closed seal. Allow a cold pack to reach room temperature before opening, so condensation does not form on the powder. A folded-over pouch is not a heat-sealed pouch, and its headspace now holds humid air. Colour can move from white toward off-white with moisture and heat. That is a signal to check loss on drying and assay, not a release test by itself. The original pack, or an opaque container that closes properly, is the storage container; a clear jar on a bench is an exposure. ## The solution and the acidic matrix The salt dissolves freely in water and gives an acidic solution. The acidity is part of the article: the powder is a salt, and the solution keeps the protonated form. It does not remove the other risks. Oxygen, light, heat and trace iron or copper can drive oxidation, and the related-polyamine profile can move before the assay does. Take the pH from the finished formula rather than from water. A buffer that lifts the pH toward neutral changes the form in solution and can change taste and stability. A ready-to-drink process adds a heat load at pasteurisation or hot fill; a stick pack avoids that step because the consumer adds water at use. Microbiology is a separate question. Yeasts and moulds can grow in an acidic drink with no preservative, so the preservation study and the water-activity check belong beside the chemical tests. A clear bottle under display light deserves its own study. ## What drives degradation What moves fermentation spermidine on storage | Factor | Effect | Control | Moisture | Loss on drying rises; caking; flow loss | Sealed pouch; dry room; desiccant if needed | Heat | Faster moisture and colour change; caking | Ambient store; cool process | Oxygen in solution | Oxidation; colour drift; related peaks | Deaerated water; low headspace; closed process | Light | Colour drift in solution | Opaque or amber pack; dark store | pH | Form and stability in solution | Buffer and test the final matrix | Iron and copper | Faster oxidation | Metal limits; avoid contact | Reducing sugars | Browning through an amine–carbonyl reaction | Check the matrix; choose excipients The factors interact. A warm, bright, humid store compounds the effects, and a neutral solution in clear glass combines several. The useful question is not whether spermidine is stable, but stable in which pack, at which condition, for how long. ## A stability protocol for the ingredient Bulk work keeps the powder in the sales pack at 25 °C/60% relative humidity and 40 °C/75% relative humidity, with pulls at release and at three, six, twelve and twenty-four months. Each pull covers assay, putrescine, loss on drying, appearance, IR identity, particle size and microbiology. Add a cycling leg: a warm spell can cake a hygroscopic powder without moving the assay. The finished product needs its own study. A capsule or tablet, a stick pack and a drink are stored in their own packs at 30 °C/65% relative humidity and at 40 °C/75% relative humidity, and tested for assay, loss on drying or water, appearance, pH and taste where relevant. Bulk data is the starting point, not a substitute for the matrix. Ask for the study report, not a summary. It should name the pack, the lot family, the condition, the time points and the individual results. A pass statement without those details cannot support a retest period. ## The finished formula changes the answer Capsules and tablets. Water is the main risk. A damp excipient can pass water to the hygroscopic fill even while the shell stays intact, so the excipient's water content belongs in the formulation review. Direct compression adds no water; wet granulation brings water and heat together. Stick packs. The seam is where a stick pack usually fails. A single pinhole in a foil laminate defeats a good barrier, so the strip and the powder are both inspected. A desiccant may be added for a humid destination. Drinks and dispersion powders. Preservation, pH, oxygen and light decide the outcome. A nitrogen flush or deaerated water can go into the process. A clear bottle under display light needs its own data rather than an assumption carried over from a dark pack. Powder blends. A reducing sugar or an aldehyde flavour can react with the amine and brown the blend. Check the matrix, not only the active, and follow colour through the study as well as at release. ## How the shelf life is set No single shelf-life number is published for fermentation spermidine, because the pack and the matrix set it. The specification carries the retest period supported by the study on that pack. Without a named pack, a storage condition and a test panel, a shelf-life figure is only an assertion. Once the retest period ends, re-assay the retained sample before extending use. A bulk figure should not be carried across to a repacked container: the surface-to-volume ratio and the opening history differ, and so does the supporting data. Check the shelf life left at shipment, not only the total: a lot stored for a year leaves less time than the headline figure suggests. The parameters followed over time are listed on the COA page. The packs are described on the MOQ page, the assay method in the methods library, and the release and study records on the quality page. The pure free base is a separate article, described on the spermidine page. The product hub lists the catalog specification. ### 04 Fermentation spermidine: MOQ, packs and lead time URL: https://nutrition.rainwoodbio.com/products/specialty/spermidine-fermentation/moq/ Reviewed: 2026-11-20 An order for fermentation spermidine can start at 1 kg, supplied in a foil pouch; production uses the 25 kg fiber drum. Dispatch is quoted at 1–7 days. A firm quotation needs the salt form and CAS, the assay and putrescine limits, the pack, the destination, the documents and the intended market. In one lineThe 1 kg pouch is a released lot in a trial-sized pack, so the powder on the bench and the certificate in the file share one code. ## Why the minimum is 1 kg The first order is a qualification step, not a stock build. A bench trial, a pilot encapsulation or tableting run, an independent identity check and a retained sample all fit inside one kilogram, and the material comes from a released lot, so the trial and the certificate share a batch. If the request is below 1 kg, the material is split from a larger pack. The split adds handling, breaks the original pack identity and weakens traceability; the chemistry is unchanged. The 25 kg drum is the production pack: less handling per kilogram, but more inventory and a longer storage period. The powder is hygroscopic, so the pack is part of the logic. A pouch that can be closed properly is easier to keep dry than a drum opened across a production week. The minimum is a pack and traceability choice, not a volume incentive. ## Packs and formats Standard fermentation spermidine packs | Format | Where it fits | Net mass | Points to note | Foil pouch | Trial and pilot batches | 1 kg | Moisture barrier; close it properly after weighing | Fiber drum | Full production | 25 kg | Lined; lot code on drum and liner | Granulated powder | Better flow, less dust | On request | Particle profile changes; new specification line | Dilution | Lower potency per gram | On request | Adds a carrier; label changes Granulation and dilution are specification changes, not packing options. Tell us before the quotation if the line needs a coarser or freer-flowing powder; the particle-size line, the label and possibly the lead time move with it. Each pack should carry the product name, the source (fermentation-derived), the form (trihydrochloride), the net mass, the lot and the storage condition. Details that cannot be tied to a certificate are a traceability gap before the powder is used. ## Lead time and dispatch Dispatch for the standard pack is quoted at 1–7 days after the order is confirmed. The window covers picking, documents and handover to the carrier. Transit, customs and the buyer's own release sit outside it. A granulation, a dilution, a non-standard pack or an outside test adds time, and the quotation should show it as a separate line. Ask for the dispatch date, not only the range. The pouch normally travels as a parcel and the drum as a pallet; the Incoterm decides who books the freight and who clears entry. The lot documents should reach the buyer with the pack, not after it. Three things move the date: a specification changed after confirmation, a document requested late, and a destination rule that requires another test. Settle them before the order, not after. ## What a quotation needs A quotation can be compared when it answers six questions: - Product and source. Spermidine trihydrochloride, CAS 334-50-9 (free base 124-20-9), fermentation-derived. - Specification. Assay ≥98.0% by HPLC, putrescine ≤0.5%, loss on drying ≤1.0%, 80 mesh, metals and microbiology. - Quantity and pack. A 1 kg pouch, a 25 kg drum, or a granulated or diluted form. - Destination and Incoterm. Country, port or address, and trade term. - Documents. COA, TDS, SDS, allergen and GMO statements, origin record, fermentation declaration. - Intended use and market. The use (supplement, food or other) and the country of sale. A quotation that says “spermidine 98%” without the salt form and the putrescine limit has not quoted this product. The same percentage on the free base is a different article, and a quotation without the destination market cannot say whether the article fits the file. ## The sample is a lot, not a demonstration The first 1 kg pouch is the qualification unit. Test identity, assay, putrescine, moisture and microbiology before scaling, and retain a sample from the same pack. The codes on the sample, the COA and the quotation should match. A trial that needs less than a kilogram is a split from a bulk lot. It carries its own handling record and cannot pass as the 1 kg foil pouch; request the split in writing and file its code with the trial results. Bench material and production material can differ in lot even when the specification is identical. A sample without a certificate is a demonstration. A sample from a different lot than the production pack is a different material for qualification, however close the assay. ## Terms to settle before the first order Set the commercial and quality terms on one page: Incoterm, pack, dispatch window, specification revision, COA per lot, retained sample, retest period, change control and the route for a disputed result. Fix them before the first production order; reopening them after a dispute is harder. A change of fermentation source, strain, medium or salt step is a change of article until the specification and the label are rechecked. Write that into the quality agreement. When a lot misses the agreed specification, the route is a joint re-test of the retained sample against the named method; a photograph of the drum is not evidence. The agreement should name the referee laboratory and say who pays for it. The product hub lists the catalog specification. The release tests are on the COA page, the market files on the compliance page, the release record on the quality page, and the term itself in the MOQ glossary entry. Analytical methods are in the methods library, and the pure free base is described on the spermidine page. ### 05 The regulatory file for fermentation spermidine URL: https://nutrition.rainwoodbio.com/products/specialty/spermidine-fermentation/compliance/ Reviewed: 2026-11-20 The fermentation spermidine file is built around the trihydrochloride salt: the free base is CAS 124-20-9, the salt is CAS 334-50-9, and the source is fermentation. The destination and the finished-product use decide which route applies. The buyer's regulatory team signs off that route; this page sets out the documents and checks the folder should hold. In one lineA source change is a regulatory change: the fermentation salt and the wheat-germ extract are different articles, and each needs its own file. ## What the file contains The folder has four jobs. It fixes the specification version, it holds the certificate for the released lot, it records the limits and label rules for the destination, and it shows how a change of source, process or pack is controlled. The COA, TDS and SDS fill parts of that structure, but none of them chooses the market route. That decision is written down separately and owned by the buyer's regulatory team. Fermentation is a source claim as well as a process. No assay can show that a lot was made by fermentation, so the folder carries the manufacturing description, the fermentation declaration and the origin record next to the analytical papers. Put a versioned contents list at the front, and record any missing document before the order is placed. ## European Union Inside the EU, the starting point is the Union list in Commission Implementing Regulation (EU) 2017/2470. As of this review it describes a spermidine-rich extract of non-fermented wheat germ, fixes its content at 0.8–2.4 mg/g, restricts it to adult food supplements and ties the daily intake to 6 mg of spermidine. That is a description of the extract. A fermentation-derived trihydrochloride is a different article, so it is checked on its own route against the current consolidated text, and the member-state decision is filed with the order. Contaminant limits, labelling rules and general food law sit around that route. The file should show the article actually placed on the market and the route that covers it. Citing the extract entry on a fermentation-salt label would leave the two out of step. ## United States On the US side, the file has to show the basis on which the fermentation trihydrochloride is sold as a dietary ingredient, and why that basis reaches the finished product. The supplier provides the document; the buyer confirms the fit. A structure/function claim is reviewed separately: it needs substantiation, and the DSHEA disclaimer has to appear with it. A “fermentation-derived” label statement is a source statement. It should match the manufacturing description in the folder, not stand alone as a marketing line. ## United Kingdom The UK is not a single market for this file. Great Britain works to the GB register and its labelling rules; Northern Ireland follows the EU list. The ship-to address decides which set applies, and the file records the choice so that a later label check can find it. ## Contaminants and limits Contaminant results are checked at the finished-product level, not only in the drum. The references below are a starting point; the destination text and the daily dose settle the final limit. Contaminant references to check for the finished product | Metal | What the folder needs | Level to check | Lead (Pb) | Lot value, method, limit and dose calculation | 3.0 mg/kg in the supplement | Cadmium (Cd) | Lot value and any category exception | 1.0 mg/kg in the supplement | Mercury (Hg) | Lot value and method | 0.10 mg/kg in the supplement | Arsenic (As) | Limit and method on the COA | Agreed customer or market limit The metal figures have to be converted through the dose before they can be compared with a supplement limit. Putrescine is a different line: it is a specified related amine at ≤0.5%, so the file carries the measured result and the method. If a customer asks about cadaverine, answer with a measured figure and a stated limit of quantification, not with a general statement. ## Claims for fermentation spermidine The claim file follows the source. The EU extract entry has its own designation and conditions, and the fermentation salt cannot cite them. Wording about cellular renewal or autophagy describes a mechanism; it is not an authorised claim. No market named here permits a disease claim for this material, and this site makes no health claim. A US structure/function claim carries its own substantiation file and the DSHEA disclaimer. ## Documents for the fermentation spermidine file The COA for this article should show the HPLC assay with detector and basis, putrescine with the limit of quantification, IR identity, loss on drying, the metals and the micro count. The specification names the trihydrochloride, both CAS numbers and the fermentation source. The folder also needs the TDS, SDS, origin and GMO statements, an allergen statement, a residual-solvent statement and a fermentation declaration. The allergen statement and the manufacturing description do different jobs. One lists what is absent; the other describes what the source is. This specification has no wheat-derived carrier, while the extract route is built on wheat germ. Keep both documents in the folder rather than letting one stand in for the other. For this article the folder begins with the catalog specification and the certificate for the lot. The buyer supplies the destination route, the dose in the finished product and the label review. The supplier holds source, process and pack in change control. ## Checklist before the first order - The version, salt form, both CAS numbers and fermentation source are written down. - The COA, TDS, SDS, allergen, GMO, origin, residual-solvent and fermentation papers are present. - Metal values are converted to the finished-product dose. - The putrescine value and its method are filed. - The label and claim have been reviewed for the destination. - Any change of source, process or pack would open a documented review. The product hub holds the catalog specification. The COA page describes the lot certificate, the identity page the analytical evidence, the methods library the test methods, the quality page the release file, and the EU regulatory notes the framework references. The spermidine product page covers the pure free base, which is a separate article. ### 06 How we prove a fermentation spermidine lot URL: https://nutrition.rainwoodbio.com/products/specialty/spermidine-fermentation/identity/ Reviewed: 2026-11-20 A fermentation spermidine lot can be called the trihydrochloride only when four records agree: the specification names the salt and CAS 334-50-9, HPLC retention and IR match the reference, the free-base and chloride figures fit the salt, and putrescine is at or below 0.5%. No single assay separates the salt from the free base, an extract or a blend. In one lineIdentity is a set of agreeing numbers: HPLC and IR name the molecule, the free-base and chloride figures name the salt, and putrescine describes the profile. ## The four identity layers A certificate can carry the correct name and still leave the identity unproven. The four records below answer different questions, and each one leaves a gap that another closes. Four records that establish fermentation spermidine trihydrochloride | Record | What it settles | Evidence | Limit of the evidence | Specification | Which article is being sold | Name, CAS, source and version | Paperwork only | Chromatography | Whether the peak is spermidine | HPLC retention against a reference; IR spectrum | The molecule, not the salt | Counter-ion | Whether the salt is the trihydrochloride | Free-base calculation; chloride by titration or ion chromatography | The salt form | Profile | What else is in the drum | Putrescine, cadaverine, loss on drying, mass balance | Consistency of the lot An answer to the first question alone describes the paperwork, not the powder. A retention time can be matched by a close homologue when the method fails to resolve the neighbouring amines. A carrier can dominate an IR spectrum, and a mass balance can be met by water. The records are read together because each one closes a different gap. ## The salt-to-base ratio and the chloride figure The free base is CAS 124-20-9 at about 145.25 g/mol. The salt, CAS 334-50-9, is about 254.63 g/mol, so 145.25 ÷ 254.63 = 57.0% of the salt's mass is spermidine. What remains is the chloride counter-ion and its proton, not a contaminant. Chloride is about 41.8% of the salt by mass. Those figures are the arithmetic check on an assay. A 98.0% trihydrochloride is 55.9% spermidine, while a 98.0% free base is 98.0% spermidine. If a quotation or a label uses the two figures as if they were the same, the mass per serving is wrong by more than 40%. A percentage without the form has not said which figure applies. Water is the other part of the balance. At loss on drying ≤1.0%, a salt at 98.0% leaves little room for related amines and water; assay plus loss on drying plus putrescine should roughly close the mass balance. A gap of several points is a question about what else is in the drum, not a rounding error. ## X-ray diffraction and the solid state X-ray diffraction asks whether the solid is crystalline and whether its pattern matches a reference. The trihydrochloride is crystalline; a spray-dried powder with a carrier, or a blend with maltodextrin, will not match the reference pattern. That makes diffraction useful when the question is solid form or a carrier, not when the question is assay. Before accepting a “match” statement, request the reference pattern and the detection limit. A report that says “XRD conforms” without the pattern has added little. Diffraction is not a routine release test here; HPLC and IR carry the routine identity, and XRD is for a disputed lot, a new source or a solid-form question. Fermentation and the salt step can change the crystal habit through drying and milling, so a pattern difference is not automatically adulteration. Read it with the chloride figure, the IR spectrum and the profile before drawing a conclusion. ## What adulteration looks like Substitutions to look for and the signal that catches each | Substitution | What it does | Signal | Test | Free base sold as salt | Assay passes; free-base fraction and pH differ | Chloride low; free-base figure high | Chloride, pH, free-base calculation | Wheat-germ extract blended in | Lowers spermidine per gram; adds extract solids | Content per gram low; IR and LOD shift | Assay, IR, loss on drying, related peaks | Putrescine-rich lot | Main peak passes; profile does not | Putrescine at or above 0.5% | HPLC related substances with a stated LOQ | Dilution with maltodextrin or salt | Lowers assay; leaves a mass-balance gap | Assay low; chloride or LOD odd | Assay, LOD, chloride, IR | Non-fermentation source | Same molecule; different source claim | Nothing in the assay | Process record and audit The last row is the one analytics cannot close. A fermentation-derived lot and a lot made by another route can share the HPLC peak, the IR spectrum and the assay. The source is a document and supply-chain question: ask for the manufacturing description, the fermentation declaration and the production site, and keep them with the lot record. Putrescine and cadaverine sit closest to spermidine: small diamines sharing the same reactive amine groups, and close enough to co-elute when the method was not built to separate them. The method should state the column, how the amine is detected or derivatised, and the quantification limit for each neighbour. A single main peak, with no related-substance section, does not describe the profile. ## How to write identity into the specification - “Spermidine trihydrochloride, CAS 334-50-9, fermentation-derived, ≥98.0% by HPLC with the detector and basis named.” - “Putrescine ≤0.5%, with the method and the limit of quantification; cadaverine reported on request.” - “Identification by HPLC retention and IR against a reference.” - “Loss on drying ≤1.0%; particle size ≥95% through 80 mesh.” - “Chloride about 41.8%, where the salt form is to be confirmed analytically.” - “No carrier; if granulated or diluted, declare the carrier and the spermidine content by mass.” ## Five questions for the supplier - Which form and CAS are on the certificate, and does the documentation name fermentation as the source? - Which HPLC detector and which basis produced the 98.0%, and is the chromatogram available? - What is the putrescine result and the limit of quantification, and does the method resolve cadaverine? - Is there an IR spectrum against a reference, and a chloride result for the salt? - On a disputed lot, would you join a re-test of the retained sample? Five clear answers make an identity file; a single percentage does not. The product hub holds the catalog specification, the COA page maps each figure to its line on the certificate, the grades page compares the salt with the other articles, and the level-four comparison covers the source and label consequences. The methods library explains the analytical techniques, and the spermidine product page describes the free base. The release workflow is on the quality page. ### 01 What the COA for ubiquinol actually contains URL: https://nutrition.rainwoodbio.com/products/specialty/ubiquinol/coa/ Reviewed: 2026-11-20 A ubiquinol certificate normally carries appearance, HPLC/UV identification, two assay lines for ubiquinol and ubiquinone, loss on drying, heavy metals, microbiology and the particle-size result. The two assay lines belong together: ubiquinol is the reduced form and ubiquinone is what it becomes when it oxidises. A certificate that reports only a “CoQ10” total has not said which form the lot contains. In one lineThe ubiquinol figure is only half the certificate: the ubiquinone result beside it, the assay basis and a method that sees both forms decide what the lot actually is. ## What each row should carry A row earns its place on the page when it says what was measured, how, and against which gate. The measured value belongs in a column of its own; a bare “conforms” states an outcome and leaves the reader unable to check it. The identification row separates ubiquinol from ubiquinone. The two assay rows carry the quantities. Ubiquinol release tests: method and limit | Parameter | Method | Release limit | Appearance | Visual | White to pale yellow powder or oil | Identification | HPLC retention and UV spectrum | Conforms to the reference | Assay, ubiquinol | HPLC with UV detection | ≥95.0% | Ubiquinone | HPLC with UV detection | ≤2.0% | Loss on drying | Gravimetric | ≤5.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh ## The assay basis and the water beside it The assay needs a basis. The catalog sets ≥95.0%, but the catalog line does not state whether that figure is as-is or on the anhydrous basis. The basis belongs in the assay row itself, not in a note at the bottom. Moisture is what separates the two bases. Take a powder that measures 95.0% as-is and carries 3.0% loss on drying: the anhydrous figure is 97.9%. Express the same 95.0% on the anhydrous basis and the as-is figure falls to 92.2%. The label on both could read “95% ubiquinol”; the powders behind the two numbers are not the same. The USP monograph for ubiquinol sets 96.0–102.0% on the anhydrous basis. A result of 95.5% on that basis is above the catalog's 95.0% number but below the monograph's 96.0% floor. Decide which gate the destination needs before the certificate is written, and put the loss on drying beside the assay as a measured figure rather than a limit. ## The gate and the measured result One column is the gate the lot had to pass; the other is the number the laboratory obtained. They should not contain the same figures. Release gates and measured results · ubiquinol | Parameter | Release limit | Result column | Ubiquinol | ≥95.0% | A measured percentage, with the basis and the wavelength | Ubiquinone | ≤2.0% | A measured percentage, separate from the ubiquinol figure | Loss on drying | ≤5.0% | A measured percentage | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot Do not replace the two assay lines with a single “total CoQ10” figure. If a total is reported, the ubiquinol and ubiquinone results should still appear, because the split is the oxidation state. The sum of ubiquinol, ubiquinone, moisture and impurities is the mass balance; the two assay limits are independent gates, not a recipe that adds to 100%. ## What shifts from lot to lot Ubiquinol is not a passive powder. It oxidises to ubiquinone on exposure to air, light and heat, so the ubiquinone line moves with the age of the lot, the sampling technique and the time between opening the pack and preparing the sample. The same drum can read differently in two laboratories when the sample handling and the delay before injection differ. The certificate should say how the sample was handled: amber glass, a nitrogen or inert headspace, and analysis without a long hold. A method that reads only the ubiquinone wavelength can under-report the reduced form, so the wavelength and the standard belong on the page. Colour is the weakest quantitative evidence. White to pale yellow is the reduced form; a shift towards orange suggests oxidation, but a batch can darken for other reasons. Use colour as a prompt to check the ubiquinone figure, not as a release test. ## When an outside laboratory is warranted An outside laboratory earns its place for a new source, a first shipment, a disputed oxidation figure, or a certificate that gives only a total CoQ10 result. The useful panel is HPLC with dual-wavelength UV detection or electrochemical detection, ubiquinol and ubiquinone reported separately, loss on drying, ICP-MS for the heavy metals, microbiology, and a check of the sample handling. Require the method's detection limit and a short description of how the sample was protected before injection. “Ubiquinone not detected” means little unless the report states the limit it was tested against. If an unknown peak appears, high-resolution mass spectrometry or NMR can identify it; a second HPLC run at the same wavelength cannot. Chain of custody matters. The referee should test the retained sample, and the report should carry the lot code. A re-test is only useful when both sides agree on the sample, the method and the basis. ## Six lines for a supplier comparison Compare six lines: form and CAS number; ubiquinol result and basis; ubiquinone result; the HPLC wavelength or detector; loss on drying; and the pack with its lot code. Two quotations that agree on “CoQ10 98%” can still describe different redox forms and different analytical methods. The second layer is traceability: who manufactured the lot, which process and carrier were used, and how the pack was sealed. Catalog data for this material is on the ubiquinol product page. Analytical separation is explained under methods; the identity page covers the form tests; the compliance page covers the market file; quality covers release. ### 02 Ubiquinol grades: powder, oil and the oxidation limit URL: https://nutrition.rainwoodbio.com/products/specialty/ubiquinol/grades/ Reviewed: 2026-11-20 Ubiquinol is offered as a powder or an oil; a carrier-based grade is a separate purchase. The catalog form is a powder at ≥95.0% ubiquinol with ubiquinone ≤2.0% and ≥95% through 80 mesh, and the oil is quoted on request. The grade decision is about the dosage form, the oxidation headroom and the label, not about a higher number on a certificate. In one lineThe grade is the presentation and the oxidation headroom: a powder, an oil or a diluted form each carries its own ubiquinone limit and handling rule. ## Why ubiquinol needs more than one grade Ubiquinol is a low-melting, fat-soluble solid that oxidises to ubiquinone. A powder is easy to weigh into a capsule or a tablet; an oil is easy to fill into a softgel or to blend into an oil-based formula. The same active at the same assay behaves differently in those two presentations, because the surface exposed to air and the carrier around it are different. The grade also fixes the specification. A powder at 80 mesh has a particle-size line; an oil has no mesh line but has a carrier and a peroxide value. A carrier-based dilution has a different assay per gram and a label that must declare the carrier. None of those is a packing choice. ## The grades side by side Ubiquinol presentations and what changes with each | Grade | Form | Catalog position | Fits | What changes | Powder, 80 mesh | White to pale yellow powder | Catalog | Capsules, tablets, dry blends | Particle size, dust, loss on drying | Oil | Oil solution or suspension | On request | Softgels, oil blends | Carrier, fill weight, peroxide value | Tighter specification | Powder or oil | Agreed in the specification | Long shelf life or a sensitive label | Assay and ubiquinone limits, method | Carrier-based powder | Active on a carrier | Not a catalog form | Low-dose units, dispersible systems | Assay per gram, carrier declaration, label The first two rows are the catalog. The third is a tighter version of the same material, not a different substance. The fourth is a different purchase: if a formula needs a carrier-based grade, it has to be specified and quoted separately, because the assay per gram and the label both change. ## Powder, oil and the handling difference The powder is white to pale yellow and is specified at ≥95% through 80 mesh. It is insoluble in water and belongs in an oil phase, an emulsion or a dry blend. The oil is a solution or suspension in a carrier; its ubiquinol content is expressed per gram, and its oxidation state depends on the carrier, the headspace and the fill temperature. Both forms are oxygen-sensitive. The powder has a larger surface area per gram and picks up oxygen at the surface; the oil dissolves oxygen, and a warm hold speeds the reaction. Light accelerates both. A clear bottle, a warm bench and an open drum are the three common exposures. Melting behaviour matters in processing. Ubiquinol melts at about 49 °C, so a hot fill or a heated blend can melt the powder and change its solid state. If the process relies on the crystalline powder, check the solid state after cooling; a melted and re-solidified lot can retain the assay while its bulk density and flow change. ## The dosage form decides the grade A two-piece capsule or a tablet takes the powder; a softgel takes an oil suspension or a powder dispersed in oil; an oil blend takes the oil. A tablet also adds compression heat and pressure, which the powder sees and the oil does not. Dose is a label decision, not a grade decision. The label should name ubiquinol and declare the amount per serving in the form the market requires. The certificate's assay is not the label dose: a 100 mg fill of a 95.0% powder carries 95 mg of ubiquinol before any overage or loss. That is arithmetic, not a recommended intake. If the formula needs a lower active weight per unit, a carrier-based grade is the usual route, but it is a separate specification with its own assay per gram and its own label declaration. Do not regard a dilution as the same grade at a lower number. ## The lines that belong in the specification - “Ubiquinol, CAS 992-78-9, C59H92O4, powder or oil as stated.” - “Assay ≥95.0% by HPLC; state the basis; ubiquinone ≤2.0% by HPLC.” - “Identification by HPLC retention and UV spectrum; name the wavelength or detector.” - “Loss on drying ≤5.0%; heavy metals and microbiology as listed.” - “Powder: ≥95% through 80 mesh. Oil: carrier, fill weight and peroxide value stated.” - “Pack, storage condition and retest period stated; oxidation-sensitive handling noted.” A specification that names only “ubiquinol powder” has left the grade, the mesh and the oxidation limit to the supplier. Name the presentation, the assay basis and the ubiquinone ceiling before the quotation. ## When another grade is the wrong choice Ubiquinol is the wrong choice when the label names ubiquinone, when the process cannot exclude oxygen, or when the market file covers only the oxidised form. It is also the wrong choice when the formula is aqueous and has no oil phase: the material is fat-soluble, and a suspension in water is not the same as a solution. If the buyer needs the more oxidation-stable form, ubiquinone is the starting point; the comparison is on the level-four page. The catalog specification is on the product page; the release tests are on the COA page; the pack and lead time are on the MOQ page; the storage rules are on the stability page. ### 02.1 Ubiquinol vs ubiquinone: the reduced and oxidised forms URL: https://nutrition.rainwoodbio.com/products/specialty/ubiquinol/grades/ubiquinol-vs-ubiquinone/ Reviewed: 2026-11-20 Ubiquinol is coenzyme Q10 with its quinone ring reduced; ubiquinone is the same molecule with the ring oxidised. The difference is two hydrogen atoms and two electrons: ubiquinol is C59H92O4, CAS 992-78-9, and ubiquinone is C59H90O4, CAS 303-98-0. They are a redox pair, not a salt and a free acid, so the choice is not a conversion at the balance; it is a choice about oxidation state, stability and the label. In one lineUbiquinol and ubiquinone differ by two hydrogen atoms and one redox step, not by a salt; the reduced form is the harder one to keep reduced. ## One redox step, two materials The quinone ring is the switch. Ubiquinone carries a quinone; ubiquinol carries the same ring as a hydroquinone, with two hydroxyl groups where the quinone had carbonyls. The isoprenoid tail is unchanged. That is why the two forms have almost the same molecular weight and the same fat solubility, and why a mass-based conversion between them is trivial compared with the analytical problem of telling them apart. Ubiquinol and ubiquinone side by side | Property | Ubiquinol | Ubiquinone | Redox state | Reduced (hydroquinone) | Oxidised (quinone) | CAS number | 992-78-9 | 303-98-0 | Formula | C59H92O4 | C59H90O4 | Molecular weight | 865.36 | 863.34 | Appearance | White to pale yellow powder or oil | Yellow to orange-yellow powder | Catalog assay | ≥95.0% by HPLC | 98.0–101.0% by HPLC | Counter-form limit | Ubiquinone ≤2.0% | Ubiquinol bounded by the related-substance method ## The two certificates do not read the same way Ubiquinol is specified at ≥95.0% by HPLC with ubiquinone ≤2.0%; ubiquinone is specified at 98.0–101.0% with a melting point of 48–52 °C. The ubiquinol figure needs its oxidation partner beside it, because the reduced form is defined partly by how much has not oxidised. The mass difference is only 2.02 g/mol, about 0.23%. A 100 mg label of ubiquinol and a 100 mg label of ubiquinone describe almost the same mass; what differs is the redox state. A “CoQ10” assay that does not name the form and the wavelength can be read as either. The USP monograph for ubiquinol sets 96.0–102.0% on the anhydrous basis, while the catalog floor here is 95.0%. The two gates are close but not identical; a 95.5% result on the anhydrous basis clears the catalog number and misses the monograph. A “total CoQ10” result after an oxidation step measures the sum and destroys the information about the form. ## Why storage moves the reduced form Ubiquinol oxidises to ubiquinone in air, and light, heat and trace metal ions accelerate the reaction. The oxidised form is the more stable one, which is the practical asymmetry: ubiquinone can be stored with less protection, while ubiquinol has to be packed and handled to keep it reduced. The rate depends on the surface, the oxygen available and the temperature. A powder has a large surface; an oil dissolves oxygen; a warm hold speeds both. A softgel fill protects the material from air after filling but adds a heat step before it. The pack and the headspace are part of the specification, not a logistics detail. This is why the word “ubiquinol” alone is not a specification. The form has to be still reduced at release and through shelf life, and that is a measured result. How the pack is tested is set out under stability. ## The label has to name the form A label that carries only the stem “CoQ10” does not say which form is inside. US practice has generally read “coenzyme Q10” as ubiquinone, while ubiquinol is a separate dietary ingredient with its own new-dietary-ingredient notification; a Supplement Facts panel should name the form the finished product contains. In the EU, the novel-food status and the permitted form have to be checked for the exact material and the member state; a supplier statement about “CoQ10” does not automatically cover the reduced form. In Great Britain, the FSA register of novel food authorisations is the reference; Northern Ireland follows the EU list. The destination address decides which applies. The label, the specification and the market file should all name the same form, and the buyer's regulatory team confirms the route; this page does not. ## When each form fits Choose ubiquinol when the label calls for the reduced form and the dosage form can protect it: a softgel fill, an oil blend, or a sealed powder pack with a controlled headspace. Choose ubiquinone when the label calls for the oxidised form, when the process and the pack cannot exclude oxygen, or when the market file covers only that form. Do not choose by a conversion factor. The molecular weights differ by 0.23%, so the mass is not the issue; the oxidation state, the analytical method, the stability data and the label are. A switch in either direction needs a new specification, a new certificate, a stability check for the pack and a label review. Ubiquinone is described on the coenzyme Q10 product page; the ubiquinol catalog is on the ubiquinol product page; the release tests are on the COA page; the analytical methods are collected under methods; the release workflow is on the quality page. ## Specification lines for each form - “Name the redox form, the CAS number and the formula.” - “Ubiquinol: assay ≥95.0% by HPLC, ubiquinone ≤2.0%, with the basis and the wavelength.” - “Ubiquinone: assay 98.0–101.0% by HPLC, melting point 48–52 °C.” - “State the pack and the storage condition; the reduced form needs the oxygen and light barrier.” - “Match the label name to the form the market file covers.” No disease-related claim is made on this page. The specification describes the powder; whether it can be sold is a separate question for the destination. ### 03 Ubiquinol oxidises back to ubiquinone; the pack sets the shelf life URL: https://nutrition.rainwoodbio.com/products/specialty/ubiquinol/stability/ Reviewed: 2026-11-20 Ubiquinol is the reduced form of coenzyme Q10 and it oxidises back to ubiquinone. The powder and the oil therefore fail in the same direction: the ubiquinol assay falls, the ubiquinone figure rises, and the colour moves towards yellow-orange. The pack, the headspace and the storage temperature decide how fast that happens; the certificate only describes the lot at release. In one lineUbiquinol fails by oxidising to ubiquinone, so the pack, the headspace and the storage temperature are the shelf life. ## The sealed powder and its exposures Loss on drying is capped at ≤5.0% in the catalog. It is a gate at release, not an allowance for storage. An opened foil pouch takes up moisture from the air, and the powder's surface is also exposed to oxygen; the two together move the assay. Store the powder in the light-resistant pouch supplied, or in another sealed opaque container; write the opening date on the pack. Light is the second driver. A clear jar on a bench is an exposure even when the lid is on. Heat raises the rate of oxidation and can soften or melt the powder at the top of a warm store; ubiquinol melts at about 49 °C, so a loading bay or a car boot in summer is a real risk. Colour is a useful early signal: white to pale yellow is the reduced form, and a shift towards orange suggests oxidation. It is not a release test, because a batch can darken without a matching change in the ubiquinone figure. ## The oil, the softgel and the process heat Ubiquinol is not used as an aqueous solution; it is fat-soluble and practically insoluble in water. The practical “solution” is an oil: a softgel fill, an oil blend or an emulsion. In oil, oxygen is dissolved in the carrier, and the oil's own oxidation products can consume the ubiquinol. The carrier, the headspace and the fill temperature all belong to the stability question. Heat arrives with the process, not only with the store. A warm blend or a hot fill puts the oil through a thermal load that the bulk powder never meets, and the hold time before filling belongs to that same exposure. Light and metal ions, iron and copper above all, speed the oxidation; clean stainless steel is not the same as a corroding fitting. A softgel protects the fill from air after sealing, but the shell is not an absolute barrier to oxygen and moisture. The finished-product stability belongs to the softgel, not to the bulk oil, and the two should not be conflated. ## The variables that move the assay What moves ubiquinol in storage | Factor | What it does | Control | Oxygen | Oxidises ubiquinol to ubiquinone | Sealed pack; low headspace; nitrogen where specified | Light | Accelerates oxidation; colour shift | Foil or opaque pack; dark store | Heat | Raises the reaction rate; melts powder near 49 °C | Controlled store; cool process | Moisture | Raises loss on drying; exposes fresh surface | Sealed pouch; desiccant where needed | Metal ions | Catalyse oxidation, especially iron and copper | Avoid contact; check equipment and colourants | Oil quality | Peroxides in the carrier consume ubiquinol | Carrier specification; peroxide value | pH in emulsion | Alkaline conditions destabilise the reduced form | Validate the emulsion pH and hold time None of those factors acts alone. A store that is simultaneously warm, bright and damp is worse than three separate stresses; a carrier with a high peroxide value consumes the ubiquinol from within. The useful question is not whether ubiquinol is stable as a material, but how long it remains reduced in a specified pack under a specified condition. ## Designing the stability run A protocol is usable when it fixes the pack, the condition, the time points and the test panel. Warehouse conditions are represented by 25 °C/60% relative humidity, with 30 °C/65% relative humidity as the intermediate case; 40 °C/75% relative humidity is the accelerated arm that stresses the pack. Add a light-exposure arm, because a dark incubator misses the failure mode that matters most. Test ubiquinol, ubiquinone, appearance and loss on drying at each point, plus microbiology where the pack is opened. For an oil or a softgel, add the carrier's peroxide value and acid value, and test the finished fill rather than the bulk oil. Report the individual figures, not a single pass note. Request the stability summary for the pack on the purchase order. A 1 kg pouch and a 25 kg drum have different headspace and different opening histories; a softgel has a shell that the drum does not. The data belongs to the pack, not to the product family. ## What the finished format adds Capsules and tablets begin dry, but capsule shells and tablet excipients can still pass moisture into the fill, and compression adds both heat and pressure. Check the ubiquinone figure at release and again after storage, along with the appearance of the powder. A tablet that carries a metal-containing colourant adds a contact that the bulk powder did not have. An oil blend or a softgel adds the carrier's oxidation state. A highly unsaturated carrier oxidises, and its peroxides can consume the ubiquinol; a saturated or monounsaturated carrier is less reactive but not inert. Any overage is the formulator's call, and it is a label and stability decision; it cannot compensate for a pack that admits oxygen. An emulsion adds pH and interfacial area. Alkaline conditions destabilise the reduced form, and a high-shear step adds oxygen. Bulk data is a starting point; the answer comes from the finished matrix. ## Where the retest period comes from No single shelf-life figure is published for ubiquinol; the pack and the storage condition determine it. The specification states the retest period, and the stability file for that pack supports it. A shelf-life figure without a named pack, a defined condition and a stated test panel is only an assertion. Extending use beyond the retest period requires a fresh assay of the retained sample. Never assume an extension, and never move a bulk figure onto a repacked container. The standard packs appear on the product hub; the release tests are set out on the COA page; pack sizes and lead time are on the MOQ page; the analytical methods are collected under methods; the release workflow is described on quality. ### 04 Ubiquinol: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/specialty/ubiquinol/moq/ Reviewed: 2026-11-20 Ubiquinol orders start at 1 kg, packed in a foil pouch; production material travels in a 25 kg fiber drum. The powder pack is quoted at 1–7 days, while the oil format is quoted on request. A firm quotation needs the redox form, the assay basis, the ubiquinone limit, the pack, the destination and the documents. In one lineOne kilogram is the qualification unit: enough to test identity, the ubiquinone limit and a bench batch from a lot that can be traced. ## Why the first pack is 1 kg One kilogram is enough for a bench batch, a retention sample and an outside test. It ships as a parcel and carries a lot code that can be matched to the certificate. Smaller quantities are normally taken from a larger lot and repacked; the chemistry is unchanged, but the pack identity and the handling record are not the original ones. Production runs use the 25 kg drum. Handling per kilogram falls, but inventory and storage time rise, which matters more for ubiquinol than for a stable powder: every month in store is another month of oxidation. The minimum follows the pack, not a sales target. ## Standard packs Packs for ubiquinol orders | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Light and moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Oil | On request | Softgel fill, oil blend | Carrier and fill weight stated; protect from light The catalog powder is ≥95% through 80 mesh. A coarser or finer powder, a carrier-based dilution or a different oil carrier is a different specification, not a packing choice; it moves the particle-size line, the assay per gram or the label. Say so before the quotation. Ask whether the pack is nitrogen-flushed. The foil and the liner are the barrier; the headspace is the oxygen reserve. A modified atmosphere is a separate instruction; the standard pack does not include it, so put it in the purchase specification. ## From order to dispatch The powder pack carries a 1–7 day lead time from order confirmation. That estimate runs from picking and paperwork to handover; transit, customs and the buyer's own release sit outside it. Get a dispatch date as well as the range. The oil format is quoted on request, so its window is stated in the quotation. A non-standard pack or a tighter specification can add time. The COA and the lot documents should travel with the pack, not arrive after it. ## Six details a quotation should carry A quotation can be compared only when it states six things: - Product and form. Ubiquinol, CAS 992-78-9, with the redox form written out. - Specification. Assay basis, the ubiquinone ceiling, moisture, mesh, the metal panel and micro. - Quantity and pack. 1 kg pouch, 25 kg drum, or the oil format. - Destination and Incoterm. The destination country and trade term, including the port or delivery address. - Documents. The documents the importer will need: COA, specification, SDS and any market-specific declaration. - Intended use and market. The intended use and the market where the finished product will be sold. A quotation that omits the redox form or the destination is not yet a quotation. The same powder can fit one market and sit outside the file for another. Commercial terms are not published here; they belong on the quotation. ## A sample that carries a lot code Qualification starts with the 1 kg pack. Before scaling, check ubiquinol, ubiquinone, moisture and micro, and retain material from the same pouch. Sample, certificate and quotation should carry the same lot code. Without a lot code, a sample is a demonstration rather than a qualification. Small trials are drawn from a split pack rather than the catalog pouch. The split is drawn from a bulk lot and carries its own record; it is not the 1 kg foil pack. Document the split and keep its lot code with the trial data; bench powder and production powder can come from different lots even when both meet the same specification. ## What the quality agreement should cover Put the commercial and quality terms in one document: Incoterm, pack, dispatch date, specification version, lot COA, retained sample, retest period and the change route. A quality agreement should close those points before the first production order. Ubiquinol adds one term that a stable powder does not need: the oxidation condition at receipt. Agree how the lot will be sampled on arrival, how quickly the ubiquinone figure will be checked, and what happens if it has moved beyond the agreed limit. A return decided on colour alone is hard to defend on either side; the ubiquinone result and the retained sample are the evidence. Catalog data is on the product hub; the COA page lists what is released; the compliance page covers the market file; storage is on the stability page; release is described on quality. ### 05 The regulatory file for ubiquinol URL: https://nutrition.rainwoodbio.com/products/specialty/ubiquinol/compliance/ Reviewed: 2026-11-20 Ubiquinol is the reduced form of coenzyme Q10, CAS 992-78-9, supplied as a powder or an oil. The specification and the lot certificate describe the material; the regulatory file has to show that the exact form is permitted for the destination, that the limits are met at the finished-product dose, and that the label names the form the file covers. The buyer's regulatory team owns the route; the list below is what the file should contain. In one lineThe ubiquinol file has to prove the reduced form, not just the CoQ10 name, before the destination route and the label can be settled. ## The four parts of the file Four things have to agree in the file: the specification for ubiquinol, the certificate for the lot, the status of the exact form in the destination, and the record of changes to source, process and pack. The lot certificate, the technical data sheet and the safety data sheet each answer a different question about the same pack. What none of them decides is whether the material may be sold in the destination, which is a separate entry in the file. The first check is identity, not paperwork. A file built on a “CoQ10” certificate that does not name ubiquinol and does not report ubiquinone has not established the form. The second check is the destination: the same material can be a food supplement in one market and a different question in another. ## European Union In the European Union, the route depends on the novel-food status of the exact material and on food-supplement law. Regulation (EU) 2015/2283 governs novel foods, and the Union list in Implementing Regulation (EU) 2017/2470 sets the authorised uses and conditions. The Commission's Novel Food Catalogue is orientation, not an authorisation; an entry for a related form does not automatically cover ubiquinol, and a supplier statement about “CoQ10” does not either. Food supplements sit under Directive 2002/46/EC, labelling under Regulation (EU) 1169/2011, contaminants under Regulation (EU) 2023/915 and health claims under Regulation (EC) 1924/2006. National enforcement and notification practice can differ, so the member state of first sale belongs in the file. Check the current consolidated texts as of this review; the buyer's regulatory team confirms the route for the exact form and dose. ## United States In the United States, ubiquinol is positioned as a dietary ingredient under DSHEA. A ubiquinol ingredient was the subject of a new dietary ingredient notification accepted by the FDA in 2005; that acceptance covers the ingredient described in that notification, not every ubiquinol material on the market. The supplier should identify the legal basis and the notification or letter that supports it; the buyer then checks that this basis reaches the finished product. The Supplement Facts panel names the dietary ingredient and the amount per serving. Any structure/function wording on a US label needs a substantiation file and the DSHEA disclaimer; a disease-related claim is not available. Label review and claim review are separate from the certificate; a COA supports the material, not the claim. ## United Kingdom Great Britain uses its own novel-food register, maintained by the Food Standards Agency, and GB labelling rules. Northern Ireland follows the EU list under the Windsor Framework. Which regime applies follows the delivery address; the buyer's regulatory team should write that decision into the order so a later label check can see the entry it relied on. ## Contaminants at the finished dose Contaminants have to be judged at the finished-product dose, not only on the drum. Use the figures below as a first reference; the destination text and the daily dose fix the real limit. Contaminant limits checked at the finished-product dose | Parameter | Usual supplement reference | Evidence for the file | Lead (Pb) | 3.0 mg/kg in the supplement | The measured lot figure, method, limit and dose calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | The measured lot figure and any category exception | Mercury (Hg) | 0.10 mg/kg in the supplement | The measured lot figure and the method | Arsenic (As) | Customer or market limit | The agreed limit and the method named on the certificate The oxidation state is not a contaminant, but it belongs in the same review: a ubiquinol lot that has oxidised in store can meet the metal panel and still miss the ubiquinone limit. The finished-product specification should carry both the ubiquinol and the ubiquinone figures. ## The label and the claim file As of this review, there is no authorised EU health claim for coenzyme Q10 or ubiquinol. “Mitochondrial”, “energy” and “antioxidant” are mechanism or nutrient words, not an authorisation; a claim written for ubiquinone does not transfer to ubiquinol, and the reverse is also true. In the United States, structure/function wording carries a substantiation obligation and the DSHEA disclaimer. No disease-related claim is open in either market, and this site publishes the specification without making a health claim. The label has to name the form. A panel that says only “CoQ10” leaves the reader to guess, and a market file written for the oxidised form does not cover the reduced one. The coenzyme Q10 page describes the oxidised material; this ubiquinol page describes the reduced form. ## What the buyer's folder needs The buyer's file needs the COA with the ubiquinol assay, its basis, the ubiquinone result and the HPLC wavelength or detector; loss on drying; the metal panel and the micro count; the TDS and SDS; the source and process description; allergen, GMO and residual-solvent statements; the stability summary for the pack; and the regulatory status statement for the exact form in the destination. If the material is a carrier-based or oil grade, add the carrier specification and its peroxide value. If the label names ubiquinol, the certificate should name ubiquinol too; a “total CoQ10” line is not a substitute. The product page holds the catalog; certificate layout is explained on the COA page; the identity page carries the analytical evidence. ## Checks before the first order - Specification version, CAS 992-78-9, redox form and assay basis are named. - The certificate, technical sheet, safety sheet and the allergen, GMO, origin and solvent statements are present. - The ubiquinone result and the HPLC method are on the certificate. - Contaminant figures have been worked through to the daily finished-product intake. - The destination reviewer has signed off the label wording and the claim. - Source, process, pack and carrier changes run through change control. Release is described on the quality page; framework references are collected in the EU regulatory notes. A certificate is evidence about the powder, not a permission to sell it. ### 06 How we prove a ubiquinol lot is the reduced form URL: https://nutrition.rainwoodbio.com/products/specialty/ubiquinol/identity/ Reviewed: 2026-11-20 A ubiquinol lot is the reduced form when four lines agree: the document names ubiquinol and CAS 992-78-9, the HPLC retention and UV spectrum match the ubiquinol reference, the ubiquinone fraction is inside the ≤2.0% limit, and the assay, moisture and impurities close the mass balance. A “CoQ10” assay alone cannot separate ubiquinol from ubiquinone; the redox pair has almost the same mass. In one lineIdentity is the ubiquinol peak, the ubiquinone ratio and the mass balance agreeing; a CoQ10 assay alone cannot tell which form is in the drum. ## Four checks that must agree Each check answers a different question, and an answer that stops at the document layer describes the paperwork, not the drum. What each identity check on ubiquinol can prove | Check | Question | Evidence | What it establishes | Paper trail | Does the paperwork name the redox form? | Name, CAS 992-78-9, formula | Only that the documents agree | HPLC and UV | Is the peak ubiquinol? | Retention time and spectrum against a ubiquinol standard | The molecule and its redox state, when both forms are resolved | Oxidation | How much ubiquinone is present? | Separate ubiquinone peak | The reduced fraction | Mass balance | Is the material diluted or wet? | Assay, loss on drying, impurity profile | Whether the numbers fit together ## The ubiquinone ratio The ubiquinone figure is the ratio that matters. At the two limits — 95.0% ubiquinol and 2.0% ubiquinone — the ubiquinone/ubiquinol ratio is about 0.021; at 99.0% and 0.5% it is about 0.005. Both can pass an assay floor, but they are not the same powder. The ratio also separates oxidation from dilution. Oxidation raises ubiquinone while the total CoQ10 stays roughly constant; dilution lowers both ubiquinol and ubiquinone and leaves the ratio roughly normal. A low ubiquinol figure with a low ubiquinone figure is more likely a carrier or a moisture problem than an oxidation problem. Report the two figures separately and state the basis. A single “total CoQ10” number hides the ratio, which is the specification that defines the reduced form. The same logic explains why a 275 nm assay calibrated for ubiquinone needs its own standard and wavelength before it can report ubiquinol. ## What XRD can and cannot show XRD asks whether the powder has a crystal lattice and whether that lattice matches a ubiquinol reference. The reduced form is a low-melting solid, and a carrier-based powder will show the carrier's peaks alongside or instead of the ubiquinol pattern. A claim of a match is thin without the pattern, the reference and the detection limit. XRD is not a release test for this product, and it does not measure the ubiquinone fraction. It is useful when the question is whether the material is crystalline ubiquinol, an amorphous dispersion or an oil-filled powder, and when two sources are being compared. In a dispute, the diffraction pattern, the chromatogram and the ubiquinone ratio together carry more weight than any single result. ## The substitutions to watch for Ubiquinol substitutions and their signals | Substitution | What it does | Signal | Test | Ubiquinone | Oxidised form; more stable, same tail | Ubiquinone above 2.0%; assay split shifts | Dual-wavelength HPLC; ratio | Dilution | Lowers active per gram | Ubiquinol low; ubiquinone low; ash or carrier present | Mass balance; loss on drying | Oxidised lot | Passed at release, aged in store | Ubiquinone high; colour orange | HPLC; retained sample | Derivative | Different molecule, such as an acetate | Extra peak; no free ubiquinol | HPLC; NMR or high-resolution MS | Carrier oil | Changes assay per gram | Assay low; oil present | Extraction; carrier specification Colour is the weakest signal: white to pale yellow covers a range, and an orange tint can come from oxidation or from a carrier. The evidence that counts is the ubiquinone ratio, the chromatogram and the mass balance. A certificate with appearance and a total CoQ10 number has not tested the substitution most likely to occur. ## Identity lines for the specification - “Ubiquinol, CAS 992-78-9, C59H92O4, reduced form.” - “Assay ≥95.0% by HPLC, with the basis stated; ubiquinone ≤2.0% by HPLC.” - “Identification by HPLC retention and UV spectrum; name the wavelength or detector.” - “Loss on drying ≤5.0%; heavy metals and microbiology as listed.” - “Powder ≥95% through 80 mesh; oil grade: carrier and fill weight stated.” - “No ubiquinone above the stated limit; no carrier or derivative not declared.” ## What the supplier should be able to answer - Which redox form is this lot, and which CAS number is on the certificate? - May I see the chromatogram used for the ubiquinol result, not just the percentage? - What is the ubiquinone result for this lot, and how was the sample protected from air and light? - What is the loss on drying, and is the assay reported as-is or on the anhydrous basis? - Would you agree to a joint re-test of the retained sample if the result is challenged? Those five answers together make an identity file; one assay figure does not. Catalog data is on the product hub; the COA page shows where each result sits; the grades page compares the presentations; the level-four page covers the redox choice; the analytical methods are under methods. ### 01 What a calcium chloride dihydrate COA reports, line by line URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-chloride/coa/ Reviewed: 2026-11-20 The certificate for a calcium chloride dihydrate lot reports appearance, identification of calcium and chloride, assay by titration, elemental calcium, water by Karl Fischer, the heavy-metal panel, microbiology and particle size. Each line needs the method, the release limit and the measured result; the catalog range is a specification, and the batch COA confirms one pack. The form and the water figure belong on the same page as the assay: without them the percentage cannot be read. In one lineThe assay is only half the figure: a 99.0–101.0% titration belongs beside the 20.0–25.0% water result, because the dihydrate and the anhydrous salt are different products. ## What the sheet has to show A COA works as a set of claims that can be checked. For every parameter the reader wants the test, the acceptance boundary and the number obtained for the lot. When a line gives only a verdict, the evidence has disappeared; when it gives a number without a method, the number cannot be reproduced. Here the identity evidence is split between two ions. Calcium is shown by the flame test and confirmed by the EDTA titration; chloride is shown by precipitation with silver nitrate. A certificate that reports calcium alone has not excluded carbonate, sulfate or a sodium chloride blend, which is why the chloride line belongs on the sheet. Release tests and methods · calcium chloride dihydrate | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | Calcium flame test and chloride precipitation | Calcium and chloride conform | Assay | Complexometric calcium and argentometric chloride titration | 99.0–101.0% | Calcium | Complexometric titration (EDTA) | 27.0–29.0% | Water | Karl Fischer | 20.0–25.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh ## The hydrate basis, water and the calcium figure Calcium chloride dihydrate is a defined compound, not a powder with a variable water load. Its formula gives 27.26% calcium, 48.23% chloride and 24.51% water, and the catalog ranges are drawn around those figures. A 100.0% result expressed as the dihydrate therefore contains about 75.5% calcium chloride; the other 24.5% is water of crystallisation, not filler. Expressed as CaCl₂ instead, a 99.0–101.0% figure would point to a largely anhydrous powder, which is a different product. The certificate should state the basis in the assay row and print the Karl Fischer result alongside it. If a buyer needs the calcium chloride content, multiply the dihydrate assay by 0.755, or divide the calcium result by 36.11%. Karl Fischer is the right water method for a hydrate. Heat-based loss on drying can drive off part of the water of crystallisation and leave a figure that is neither free moisture nor total water. The water result and the assay are a pair; reading one without the other is how a hydrate gets mistaken for an anhydrous salt. ## The limit column and the result column Two numbers sit behind every line: the limit the lot had to meet and the result the laboratory measured. They should never share a column. A result that repeats the range has not told the buyer what the lot contained, and a certificate that reports only “passes” has removed the data needed for a deviation or a trend. Limit and result columns for the release tests | Parameter | Release limit | Result column | Assay | 99.0–101.0% | A measured figure, with the hydrate basis named | Calcium | 27.0–29.0% | A measured figure by the named titration | Water | 20.0–25.0% | A measured figure by Karl Fischer | Identification | Calcium and chloride conform | The two tests and what was observed | Heavy metals | Per element | One figure per element in mg/kg | Microbiology | Counts and absence | A count plus the absence statement | Particle size | ≥95% through 80 mesh | The measured percentage through the sieve A single total for heavy metals hides which element drove it; the file needs lead, arsenic, cadmium and mercury separately. Microbiology needs a count and an absence statement, because a count alone does not say whether Salmonella was tested. For identity, the test names are the evidence: “conforms” without the method is a conclusion, not a result. ## What moves between batches Water is the first variable. A sample left open in a humid room gains moisture within hours, and the water figure rises while the as-is assay falls. Powder taken from the top of a drum may not match the retained sample at the bottom. Crystallisation and drying move water and assay together; milling and sieving change the particle-size number without changing the chemistry. The calcium and chloride results should move as a pair. A lot at the top of the calcium range and the bottom of the chloride range is not the dihydrate; it is a blend or another salt. Colour can drift from white to off-white with moisture and trace iron, a shift the catalog window allows, so appearance alone should not reject a lot. Raw material source drives the trace metals. The limestone route and the brine route carry different impurity profiles, and lead is the usual watch item. A series of lots is more informative than a single certificate: water creeping upward, calcium drifting, or the calcium-to-chloride ratio shifting all point to a process change. The lot code on the paper should be the same one printed on the pouch and the drum. ## When an outside laboratory earns its place Outside testing is worth ordering at a new source, a first regulated shipment, a hydrate dispute or a result that does not reconcile with the batch record. The panel should be built for the question, not copied from the release sheet. For a hydrate dispute, calcium by EDTA, chloride by silver nitrate, water by Karl Fischer and XRD for the phase are the core; add ICP-MS and microbiology when the lot is new to the buyer. Two details make the report usable. First, the detection limit: a statement that something was not found means little without the level at which the laboratory looked. Second, the sample identity: the report should name the lot, the pack and the retained sample so the result can be tied back to the material in the warehouse. ## What to compare between suppliers Compare the form before the assay: hydrate and CAS number, then assay with its basis, calcium and chloride, water, the metal and micro panels, particle size and pack. Two lots can match on assay and still differ on hydrate form, and the mass per dose then differs too. Ask for the manufacturing source and the drying and milling route as well. Those records explain why two certificates with the same specification can behave differently in a capsule filler or a beverage line. The catalog figures are on the calcium chloride product page; the grades page sets out the dihydrate and anhydrous forms; the identity page describes the tests that distinguish the salt from carbonate; the methods index covers the titration and water methods; the quality page explains how a lot is released. ### 02 Calcium chloride dihydrate or anhydrous: choosing the form URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-chloride/grades/ Reviewed: 2026-11-20 Calcium chloride is sold as the dihydrate powder, the anhydrous salt, and granulated or solution forms. The catalog grade is the dihydrate at 99.0–101.0% by titration with 27.0–29.0% calcium and 20.0–25.0% water; the anhydrous salt carries about 36% calcium and much less water. The form changes the mass that carries a dose, the hygroscopicity and the label before it changes the assay. In one lineThe dihydrate and the anhydrous salt are different products: the form fixes the calcium content, the water figure and the mass that carries a given calcium dose. ## Why one name covers several products Calcium chloride is a hydrate in its ordinary food and supplement form. The dihydrate, CaCl₂·2H₂O, holds two water molecules per calcium ion; the anhydrous salt, CaCl₂, holds none. Both are called calcium chloride on a purchase order, and both can titrate near 100% against their own formula, so the assay alone does not tell the buyer which powder is in the drum. The commercial forms follow the water. A 74–80% flake is the dihydrate or a partly dried form of it, a 94–97% powder or granule is the anhydrous salt with some residual water, and a 30–40% solution is the salt in water. The catalog powder is the dihydrate at 80 mesh; the flake, the anhydrous granule and the solution are separate specifications, even though the chemistry is the same. The choice is not a purity hierarchy. The anhydrous salt is not “stronger” in a useful sense; it is the same calcium in a smaller mass, with a greater affinity for water. The dihydrate is easier to weigh and less aggressive in the drum, but it brings 24.5% water with every gram. The form has to match the dosage form and the pack. ## The dihydrate and the anhydrous salt side by side Calcium chloride dihydrate and the anhydrous salt | Property | Dihydrate powder | Anhydrous powder or granule | CAS number | 10035-04-8 | 10043-52-4 | Formula | CaCl₂·2H₂O | CaCl₂ | Assay | 99.0–101.0% as the dihydrate | Usually 94.0–97.0% as CaCl₂ | Calcium | 27.0–29.0% | About 34.0–35.0% | Water | 20.0–25.0% by Karl Fischer | A few percent or less | Hygroscopicity | Deliquescent in humid air | More aggressive; keep sealed | Typical use | Capsules, blends, beverage concentrates | Concentrates and moisture-tolerant systems | Label name | Calcium chloride | Calcium chloride The last row is the same for both, which is why the form has to be written into the specification rather than inferred from the ingredient name. The assay figures are not directly comparable either: 99.0–101.0% as the dihydrate is about 75% calcium chloride, while 96.0% as CaCl₂ is about 96% calcium chloride. A buyer who compares the two percentages without the basis will draw the wrong conclusion about which powder is richer. ## Deliquescence, dissolution and the powder The catalog fixes ≥95% through 80 mesh. The dihydrate is a free-flowing powder when dry, but it is deliquescent: in humid air it absorbs water, cakes and eventually dissolves in the water it has taken up. The anhydrous salt is more aggressive, and it releases more heat when it dissolves. A spill on a damp bench or on skin needs water and care, not a dry brush. Dissolution is exothermic. A concentrated stock warms as the salt goes in, so make it in a plastic or stainless-steel vessel, add the salt to the water rather than the water to the salt, and let the solution cool before it meets a heat-sensitive ingredient. The solution is neutral to slightly acidic as supplied; it does not buffer the formula. Bulk density, flow and particle distribution are not on the catalog list, and they are what decide how the powder fills a capsule or a sachet. A granulated grade can run faster on a filler and generate less dust, while a fine powder disperses faster in a beverage concentrate. Ask for the particle profile and a sample from the production pack, not only the mesh line. ## Dose arithmetic and the label The arithmetic follows the calcium figure. A 500 mg elemental calcium dose needs 500 ÷ 0.2726 = 1.83 g of the dihydrate, or about 1.38 g of the anhydrous salt at 36.1% calcium. A 200 mg dose needs 734 mg of the dihydrate; 1,000 mg needs 3.67 g. The dihydrate mass is larger because a quarter of it is water. The chloride comes with the calcium. About 1.83 g of the dihydrate carries 0.88 g of chloride, and the same 500 mg of calcium from the anhydrous salt carries about the same chloride, because the calcium-to-chloride ratio is fixed by the formula. A form change does not reduce the chloride load for the same calcium dose; it changes the mass, the water and the handling. Taste is the other constraint. Calcium chloride is salty and slightly bitter at high concentration, and a stick pack carrying 500 mg of calcium is a strong taste. A capsule avoids the taste but needs a fill weight that can hold 1.83 g, which is two large capsules or a tablet. A beverage concentrate can carry the salt when the dilution and the flavour mask are designed for it. The label should state the salt and the elemental calcium, and the two figures should agree with the weigh-up. ## What to write into the specification - “Calcium chloride dihydrate, CAS 10035-04-8, CaCl₂·2H₂O.” - “Assay 99.0–101.0% by titration, expressed as the dihydrate; calcium 27.0–29.0%; water 20.0–25.0% by Karl Fischer.” - “Identification: calcium and chloride conform.” - “Particle size ≥95% through 80 mesh; state the particle profile if the powder is to be filled.” - “Heavy metals Pb ≤3, As ≤2, Cd ≤1, Hg ≤0.1 mg/kg; microbiology as listed.” - “No carbonate, sulfate or sodium chloride added; hydrate form and water under change control.” - “Destination and intended use confirmed before the order; the label names the salt.” The negative clause is part of the form decision. A dihydrate specification that does not exclude the carbonate, the sulfate and the sodium chloride leaves the cheaper substitutions inside the calcium window, and the chloride figure is the line that catches them. ## When the other form is the wrong choice If the formula needs a non-hygroscopic powder, neither form is a good answer: the dihydrate still picks up water, and the anhydrous salt is worse. A sealed sachet, a foil-lined pack or a granulated grade with a proper moisture barrier is the practical fix. If the process adds the salt to an acidic, water-rich mix and the powder must stay free-flowing on the line, the dihydrate is easier to handle but still needs a controlled room. If the label names calcium carbonate, the chloride cannot be substituted. The carbonate carries more calcium per gram, behaves differently in acid and changes the pH, so the switch is a new formula and a new label. The chloride versus carbonate comparison takes the solubility, the pH and the label further. The product hub carries the catalog figures; the COA page shows how the hydrate is reported; the calcium carbonate page is the other side of the salt choice; the methods index covers the titration and water tests; the quality page describes the release workflow. ### 02.1 Calcium chloride vs calcium carbonate: solubility, pH and the label URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-chloride/grades/calcium-chloride-vs-calcium-carbonate/ Reviewed: 2026-11-20 Calcium chloride dihydrate dissolves freely in water and gives a solution that is neutral to slightly acidic; calcium carbonate is practically insoluble, reacts with acid and releases carbon dioxide, and its slurry is alkaline. The choice follows the dosage form and the formula pH before it follows the calcium figure, and the label has to name the salt that is actually used. In one lineOne dissolves and one reacts: the chloride gives a clear, near-neutral solution, the carbonate needs acid and leaves an alkaline suspension, and the label has to name the salt the formula actually uses. ## Two salts at opposite ends of the solubility scale Calcium chloride is freely soluble: roughly 75 g of CaCl₂ per 100 g of water at 20 °C, and the dihydrate dissolves to a clear, colourless solution. Calcium carbonate is practically insoluble, on the order of milligrams per litre at neutral pH, so it sits in a suspension rather than a solution. The difference is not a matter of degree; it decides which dosage forms are possible. A clear beverage concentrate, a brine or a firming bath can carry calcium chloride; a carbonate in the same formula settles unless the acid dissolves it. Acid dissolution is a reaction, not a solubility: CaCO₃ + 2H⁺ gives Ca²⁺ + CO₂ + H₂O, and one gram of carbonate releases about 0.44 g of carbon dioxide. That gas is useful in an effervescent tablet and a problem in a sealed bottle or a clear drink. The chloride does not effervesce and leaves the acidulant balance to the rest of the formula. The carbonate is practical only when the gas and the acid consumption are part of the design. ## What each salt does to the pH Calcium chloride is the salt of a strong acid and a strong base; its solution is neutral to slightly acidic as supplied, and the exact pH depends on concentration and dissolved carbon dioxide. It does not buffer the formula, so the pH is set by the other ingredients. Calcium carbonate is a base. A slurry is alkaline, and in an acidic formula it neutralises acid until the carbonate is consumed. That changes the pH, the taste and the stability of every acid-sensitive ingredient in the mix. An acidulant, a vitamin C system or a fruit-flavoured drink built on carbonate will drift upward in pH and release gas; the same formula built on the chloride leaves the pH to its own buffer and acidulant. The chloride has its own formula effect. Calcium ions crosslink alginate and pectin, so a hydrocolloid system can gel when the salt is added. The chloride ion raises the ionic strength, which changes the behaviour of proteins and some colours. Those are formulation checks rather than label questions, but they decide whether a switch works in the matrix. ## The calcium and chloride arithmetic Calcium chloride dihydrate against calcium carbonate | Property | Calcium chloride dihydrate | Calcium carbonate | Formula | CaCl₂·2H₂O | CaCO₃ | Calcium | 27.0–29.0% | 39.0–41.0% | Salt for 500 mg calcium | About 1.83 g | About 1.25 g | Water solubility | Freely soluble | Practically insoluble | Solution or slurry pH | Neutral to slightly acidic | Alkaline | Acid reaction | None | Carbon dioxide released | Chloride load | About 0.88 g per 500 mg calcium | None | Label name | Calcium chloride | Calcium carbonate At the same calcium dose, the carbonate is the smaller mass because it is about 40% calcium against about 27% for the dihydrate. The chloride is the larger mass, and it brings about 0.88 g of chloride with every 500 mg of calcium. That chloride is not an impurity; it is the counter-ion, and the formula has to carry it. The calcium figure is not the only number that matters. A 500 mg calcium claim is 1.83 g of the dihydrate or 1.25 g of the carbonate. The two salts meet the same claim with different masses, different tastes and different effects on the mix. ## What the label has to say Both salts have an additive identity in the EU: calcium chloride is E 509 and calcium carbonate is E 170. In the ingredient list, the name that appears has to be the salt that was used, and a source claim on the front of the pack has to match the ingredient list on the back. In the nutrition declaration, calcium is declared as the nutrient, not as the salt. In the US, the Supplement Facts panel declares calcium, and the ingredient list names the salt. 21 CFR 184.1193 and 21 CFR 184.1191 affirm the two substances as GRAS for direct food use, but a supplement use has its own dietary-ingredient positioning. The buyer's regulatory team confirms the route for the destination. A switch from carbonate to chloride changes the ingredient name, the mass per serving and the taste, even when the elemental calcium stays the same. The chloride also adds a counter-ion, so the nutrition and the formula arithmetic have to be rebuilt rather than edited. ## When to choose the chloride and when the carbonate Choose the chloride for a clear liquid, a concentrate, a brine, a firming application or a formula that must stay near neutral. It is also the practical salt when the dose has to dissolve quickly and the chloride load is acceptable. Its limits are taste and hygroscopicity: the powder picks up water, and a high dose tastes salty. Choose the carbonate for a tablet, a capsule or a dry blend where the mass matters and the chalky mouthfeel is acceptable. It is the compact source of calcium for a high claim, and the acid reaction is useful in an effervescent format. It is the wrong salt for a clear acidic drink and for a formula where the pH must not rise. Neither salt is a drop-in for the other. A switch changes the mass per dose, the pH, the gas, the chloride load and the label. Run the trial on the salt that will be bought, not on a sample of the other. The grades page covers the hydrate forms within the chloride; the compliance page covers the market file; the quality page describes the release workflow. ## What to write into the specification when switching - “Calcium chloride dihydrate, CAS 10035-04-8, or calcium carbonate, CAS 471-34-1; the salt is named in full.” - “Calcium, the assay basis and water for the chloride; assay, calcium and acid-insoluble matter for the carbonate.” - “The intended matrix, the target pH and the acidulant or buffer, with a compatibility check.” - “The chloride load at the dose if the chloride is chosen.” - “The label name and the additive number, written into the specification, not left to the artwork.” - “The destination and the route confirmed before the first order.” The calcium chloride product hub carries the catalog figures; the calcium carbonate page is the other side of the choice; the methods index explains the titration and water tests used on both salts; the COA page shows how the chloride is reported on the certificate. ### 03 Calcium chloride stability: deliquescence, solution and the pack URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-chloride/stability/ Reviewed: 2026-11-20 Calcium chloride dihydrate is stable in a sealed, dry pack, but it is deliquescent: it takes water from humid air, cakes, and can dissolve in the water it absorbs. In solution the salt is chemically stable, yet water loss, pH drift, chloride corrosion and microbial growth decide the shelf life of the finished product. The pack and the storage condition are part of the specification, not an afterthought. In one lineWater decides the powder and the solution: the dihydrate picks up moisture until it deliquesces, while a calcium chloride solution loses water, drifts in pH and attacks the wrong container. ## The powder: water, caking and the seal Calcium chloride dihydrate holds two water molecules in its crystal, and the certificate records 20.0–25.0% water against a theoretical 24.5%. The range is a release window, not a reserve for storage. A powder that sits in humid air will take up more water, cake and eventually become a solution; one that has been over-dried carries less water of crystallisation than the name implies. Both directions matter, and the water result is what distinguishes them. A sealed foil pouch or a closed drum liner is the barrier. Once the pouch is opened and folded, the headspace exchanges with the room, and the moisture barrier is gone. For a long hold, move the remainder into a smaller container that closes properly and write the opening date on it. Desiccant helps in a humid climate, but it cannot replace a seal. Because the material is hygroscopic, a receipt check should include water as well as appearance. A pack that crossed a humid port can arrive with a different water figure from the release certificate, and that is a transport issue rather than a manufacturing one. ## The solution: a different set of failure modes Calcium chloride dissolves with heat. A concentrated stock warms as the salt is added, so use a plastic or stainless-steel vessel, add the salt to the water and let the solution cool before it meets anything heat-sensitive. The solution is neutral to slightly acidic as supplied; it does not buffer, and its pH can drift as it takes carbon dioxide from the air. The chloride is the materials problem. Mild steel and aluminium are attacked, and some stainless steels pit at higher temperature and chloride concentration. Plastic, FRP or a compatible stainless grade is the safe choice. A dilute solution with no preservative can also grow microorganisms, so the hold time needs data rather than an assumption. Calcium also reacts with the formula. Phosphate, sulfate and carbonate can precipitate it; alginate and pectin can gel as the calcium crosslinks them. Test those interactions in the matrix at the process pH, because they can look like a stability failure when the salt is behaving normally. ## What drives change during storage Storage and formula factors for calcium chloride dihydrate | Factor | Effect on the material | What controls it | Humidity | Water uptake, caking, deliquescence | Sealed pouch, drum liner, desiccant | Heat | Faster moisture movement; warm solution | Controlled store; cool the stock | Carbon dioxide | pH drift in an unbuffered solution | Closed vessel; validated hold time | Phosphate, sulfate, carbonate | Calcium precipitation | Check the formula for incompatible anions | Metal contact | Chloride corrosion and metal pickup | Plastic, FRP or compatible stainless | Microorganisms | Growth in a dilute solution | Validated hold time or preservative The factors compound. A warm, humid store does more than the sum of warmth and humidity, and a dilute solution in a steel tank adds corrosion and microbial risk to the pH drift. The useful question is not whether the salt is stable, but in which pack, at which condition and in which matrix. ## Building a stability protocol Write the protocol around the pack and the question. Long-term 25 °C/60% RH and intermediate 30 °C/65% RH describe a warehouse; 40 °C/75% RH accelerates the pack. For the powder, add a high-humidity arm, because a dry incubator will not show deliquescence. Light is a minor factor for this salt, so the moisture barrier deserves the extra arm. At each point, test assay, calcium, water, appearance, solution pH and microbiology. For a liquid, include the container and the headspace, and record the fill volume so evaporation is visible in the concentration. The report should give the individual results and identify the pack and lot family; a summary that says “stable” is not enough to assign a retest period. Use the pack that will be purchased. A pouch and a drum differ in surface-to-volume ratio, headspace and how often they are opened, so a result from one does not automatically describe the other. ## The finished formula changes the answer A capsule or tablet fill exchanges water with the shell and the excipients. Check water and appearance at release and again after storage. A stick pack is limited by its seal: a pinhole admits humid air and the powder cakes at the fold. Neither format inherits the bulk pouch's shelf life. A beverage concentrate brings the chloride load, the pH and the container together. A clear concentrate can be fine in a plastic bottle and fail in a lined steel tank; a dilute ready-to-drink version adds a microbiological question. The bulk stability result is the starting point, not the answer. Water uptake often shows up as flow loss and caking before any analytical result moves. Inspect the powder, not only the certificate. ## How the shelf life is set No single shelf life is published for calcium chloride dihydrate, because the pack and the storage condition define it. The retest period belongs on the specification and rests on the stability file for that pack. A number without a pack, a condition and a test panel is not a shelf life. At the end of the retest period, re-assay the retained sample before extending use. Do not extend by default, and do not apply a bulk figure to a repacked container. For a deliquescent salt, the seal on the repack is part of the result. The product hub lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the methods index covers the water and titration methods; the quality page describes the release workflow. ### 04 Calcium chloride MOQ, packs and lead time URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-chloride/moq/ Reviewed: 2026-11-20 The minimum order is a single 1 kg foil pouch of calcium chloride dihydrate; production volume ships in a 25 kg fiber drum, and the standard pack is quoted at 1–7 days. A deliquescent salt makes the pouch and its seal part of the quotation rather than a dispatch detail. A granulated form or a different particle profile is a separate specification, with its own particle-size line and lead time. In one lineOne kilogram is the smallest pack that can be sampled, tested and traced as a lot, and for a deliquescent salt the seal on that pack is part of the specification. ## Why the minimum is 1 kg One kilogram covers a bench trial, a retained sample and an independent identity test, and it fits a courier parcel. That matters when a formulator needs powder before the production plan is fixed. Each pouch is a commercial unit with its own lot code and certificate, not a scoop taken from a drum. Below 1 kg the material is normally split from a production lot and repacked. For calcium chloride dihydrate that costs more than the handling: the split exposes the powder to room air, the replacement pouch may not have the same moisture barrier, and the original lot trail becomes harder to follow. The 25 kg drum cuts handling per kilogram, but it ties up inventory and storage time. The minimum follows the pack, not a volume target. ## Packs and formats Calcium chloride dihydrate pack options | Format | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal, or transfer the remainder after opening | Fiber drum | 25 kg | Production | Liner; lot code stamped on drum and liner | Granulated powder | On request | Dust control and flow | Particle size changes; chemistry unchanged Catalog calcium chloride dihydrate is milled to ≥95% through 80 mesh. Granulation changes that sieve profile, so it is a new physical specification rather than another bag size. If a capsule filler or sachet line needs a coarser, freer-flowing granule, raise it before the quotation: the sieve line changes and the lead time may move with it. ## Lead time and dispatch An order confirmed on the standard pouch or drum is quoted at 1–7 days. Those days cover picking, the lot file and handover to the forwarder; transit, customs and the buyer's own release sit outside them. A special granulation, a split pack or a non-standard pack gets its own date in the quotation instead of being folded into the standard window. Put the dispatch date in the order, not just the 1–7 day range. The pouch usually leaves as a courier parcel; the drum is palletised, and the Incoterm decides who books the freight and who clears entry. Send the COA and the lot file with the material rather than after it, because a quality team may have to release a hygroscopic powder before the pack is opened. ## What a quotation needs Six details make two quotations comparable: - Product and form. Calcium chloride dihydrate, CAS 10035-04-8, written as CaCl₂·2H₂O with its water range. - Specification. Assay and its hydrate basis, calcium, Karl Fischer water, heavy metals, microbiology and the 80 mesh particle size. - Amount and pack. A 1 kg pouch or a 25 kg drum; a granulated form is quoted separately. - Delivery point and Incoterm. The country, port or street address, and the trade term that applies. - Documents. COA, TDS, SDS, food-grade statement, allergen and GMO statements, and any market-specific declaration the importer needs. - Intended use and market. Whether the destination file counts it as a food additive, a mineral source or a processing aid, and where the finished product will be sold. Leave out the hydrate form or the water range and the offer cannot be compared: the dihydrate and the anhydrous salt share a name but not a mass per dose. Commercial terms are not printed on this page; they belong in the quotation. ## The sample is a lot, not a demonstration Use the 1 kg pouch as the qualification lot, not as a demonstration. Before scale-up, run identity, assay, calcium, Karl Fischer water and microbiology, and retain a portion from that same pouch. Repeat the water test when the parcel arrives as well as at release: powder that has stood open on a bench no longer represents what was shipped. Pouch label, COA and quotation should all carry one lot code. A bench trial that needs less than a kilogram is normally a repack from a production lot, not the catalog pouch. Request the split in writing, and file its lot code beside the trial data. The bench sample and the drum that follows can be different lots even when every certificate line reads the same. ## Terms to settle before the first order The quotation and the quality agreement should read as one document: spec revision, pouch or drum, Incoterm, the dispatch window, a COA for every lot, the retained sample, the retest period and how a change is handled. Settle all of it before the first production order; once a dispute exists, the same conversation is much harder. When a lot misses the agreed specification, the evidence is the retained sample and a joint re-test by the named method — not a photograph of the drum. Caking is the awkward case: a pouch that has set solid can still pass the assay and yet jam the filler. The agreement should say whether caking is a defect, how it is judged and what remedy follows. Catalog figures are on the product hub; the release tests are on the COA page; market files are on the compliance page; moisture and pack behaviour are on the stability page; the release workflow is on the quality page. ### 05 The regulatory file for calcium chloride URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-chloride/compliance/ Reviewed: 2026-11-20 Calcium chloride can enter a market as a food additive, as a source of calcium in a supplement, or as a processing aid, and each route carries its own limits, label rules and documents. In the EU the additive is E 509, with purity criteria in Commission Regulation (EU) No 231/2012; in the US, 21 CFR 184.1193 affirms it as GRAS for direct food use. The buyer's regulatory team confirms the route for the finished product and the destination; this page lists what the file should hold. In one lineThe same salt can enter a market as a food additive, a mineral source or a processing aid, and the route decides the limits, the label and the documents. ## What the file contains The file has four parts: the specification for the exact form, the certificate that releases the lot, the route and limits for the destination, and the change-control record for source, process and pack. The COA reports the lot, the TDS states the specification and the SDS covers handling. None of them decides the route, which is recorded separately. Start with the form. The dihydrate, CAS 10035-04-8, is the catalog material; the anhydrous salt, CAS 10043-52-4, is a different product with a different mass per dose. A file that names “calcium chloride” without the hydrate has left the identity open, and the label cannot be checked against an open identity. ## European Union In the EU, calcium chloride is authorised as the food additive E 509 under Regulation (EC) No 1333/2008, and its purity criteria sit in Commission Regulation (EU) No 231/2012. For a food supplement, Directive 2002/46/EC Annex II lists calcium chloride among the permitted calcium sources, as amended; the buyer checks the current annex and the member-state route, as of this review. General food law, labelling under Regulation (EU) No 1169/2011 and the contaminant limits apply alongside those entries. The additive use and the supplement use are not the same file. An additive entry has a functional class and conditions of use in the additive annexes; a supplement source is a nutrient form. A product can rely on both, but the file and the label should say which basis is being used for which purpose. ## United States In the US, 21 CFR 184.1193 affirms calcium chloride as GRAS for direct food use in accordance with good manufacturing practice. For a dietary supplement, the ingredient has to be positioned as a dietary ingredient, and the Supplement Facts panel declares the calcium; 21 CFR 101.36 sets the panel format. The supplier names the basis it relies on, and the buyer checks that the basis covers the finished product and the claim. State rules are separate. California Proposition 65 has its own lead threshold, and a pharmacopoeial claim brings USP and into the file. Neither question is settled by the COA, and both should be asked before the formula is fixed. ## Contaminants and the finished dose The contaminant limits are a finished-product calculation. At the catalog limits, a 500 mg calcium dose from the dihydrate is about 1.83 g of powder, so a lead result of 3 mg/kg contributes about 5.5 µg of lead to that dose. The calculation has to be repeated for the actual dose and the actual lot result. Contaminant limits to confirm for the finished product | Parameter | Ingredient limit | What the file should show | Lead (Pb) | ≤3 mg/kg | Lot result, method and the finished-dose calculation | Arsenic (As) | ≤2 mg/kg | Lot result and method | Cadmium (Cd) | ≤1 mg/kg | Lot result and the EU supplement level | Mercury (Hg) | ≤0.1 mg/kg | Lot result and method In the EU, Regulation (EU) 2023/915 sets maximum levels for food supplements: lead 3.0 mg/kg, cadmium 1.0 mg/kg with limited exceptions, and mercury 0.10 mg/kg, as of this review. The finished-product level applies to the supplement as sold, not to the drum, and a highly soluble salt is easy to distribute unevenly in a small batch if the premix is not validated. ## Label and claims Claims are a separate review. In the EU, a calcium claim has to come from the authorised list in Regulation (EU) No 432/2012 and be used under Regulation (EC) No 1924/2006; the claim is about calcium, not about the salt. In the US, a structure/function statement needs substantiation and the DSHEA disclaimer. A disease-related claim is a separate route in both markets, and a certificate does not support a claim. The label names the salt. In the EU ingredient list, calcium chloride is declared by name, and where it functions as an additive the E number and the functional class are added in the form the destination requires. In the Supplement Facts or the nutrition declaration, calcium is declared as the nutrient, not as the salt. If the brand claims a source, the source in the file has to match the pack. The chloride side needs its own check. The salt contributes chloride as well as calcium, and the destination's rules decide whether that contribution is declared or only counted in the formula. A label that declares calcium but not the counter-ion is not necessarily wrong, but the omission should be a decision rather than an oversight. ## Documents for the file The file needs the COA with the titration assay, calcium, water by Karl Fischer, the identity tests and the metal panel; the TDS with the specification version; the SDS; the food-additive compliance statement for E 509 and the purity criteria; the GRAS citation for the US; the allergen statement, which for this mineral salt declares no allergen; the GMO statement; the country of origin; and any halal or kosher certificate the customer requires. The specification must name the dihydrate and the assay basis, because a 99.0–101.0% figure expressed as the dihydrate is not the same number as an anhydrous assay. Add the pack and the storage condition: for a deliquescent salt, the barrier is part of the material's identity in use, and a certificate for a pouch does not automatically cover a repacked container. ## Checklist before the first order - Specification version, CAS number and hydrate form are named. - COA, TDS, SDS, additive and GRAS statements are on file. - The contaminant results are converted to the finished-product dose. - The label and the claim have been reviewed for the destination. - Source, process and pack are under change control. - The quotation, the specification and the certificate refer to the same version. The product hub carries the catalog specification; the COA page explains the lot certificate; the identity page covers the analytical evidence; the grades page covers the form; the quality page describes the release file. ### 06 How to prove a lot is calcium chloride dihydrate URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-chloride/identity/ Reviewed: 2026-11-20 A calcium chloride dihydrate lot is proved when four measurements agree: the document names the dihydrate and CAS 10035-04-8, the calcium titration gives 27.0–29.0%, the chloride titration gives the proportion the formula predicts, and the Karl Fischer water sits near 24.5%. Calcium alone cannot separate the chloride from the carbonate, the sulfate or a sodium chloride blend. The ratio and the water are what close the case. In one lineCalcium proves the element is present; the chloride figure, the water figure and the calcium-to-chloride ratio prove which salt it is. ## The four identity layers A certificate can name the right material and still fail to prove it. The four layers below are separate questions, and each one needs its own evidence. A supplier who answers only the first has described the paperwork, not the powder. Four layers of calcium chloride dihydrate identity | Layer | Question | Test | What it proves | Document | Is the hydrate named? | Name, CAS number, formula | Paperwork only | Calcium | Is the element present? | Flame test and EDTA titration | Calcium, not the salt | Chloride | Is the anion chloride? | Silver nitrate titration | The chloride anion | Water and balance | Is it the dihydrate? | Karl Fischer water; calcium, chloride and water mass balance | The hydrate form The assay sits across the last three layers. A titration that reports 100% against the dihydrate formula is consistent with the calcium and water figures, but it can also be met by a blend that has been built to the same percentage. The ratio is the check that a single assay cannot provide. ## The calcium-to-chloride ratio and the water balance Pure calcium chloride dihydrate is 27.26% calcium, 48.23% chloride and 24.51% water by mass. That is a calcium-to-chloride mass ratio of 1:1.77 and a molar ratio of 1:2, with two water molecules for every calcium ion. The numbers are fixed by the formula, so a measured set that departs from them is describing a different material. If calcium is high and chloride is low, the powder is likely a carbonate, an oxide or a sulfate. If chloride is high and calcium is low, sodium chloride is the likely blend. If both are near the formula but the water is low, the lot is partly anhydrous; if the water is high, it has picked up moisture or carries a diluent. The three figures should be read together, not one at a time. The assay has its own basis trap. A 99.0–101.0% result expressed as the dihydrate is about 75% calcium chloride by mass; the same 99–101% read as CaCl₂ would describe a partly anhydrous powder, not this hydrate. A certificate that gives an assay without the form or the water has not said which number it reports, and two suppliers can quote the same percentage for different powders. ## X-ray diffraction and the hydrate phase X-ray diffraction answers the solid-state question: is the powder the dihydrate, the anhydrous salt, or a carbonate phase? The diffraction pattern of the dihydrate differs from the anhydrous salt and from calcite, so a pattern match can confirm the hydrate and expose a blend. XRD is not a purity assay and it does not measure the counter-ion; it is a phase check. Sample preparation matters for a deliquescent salt. A sample left open can pick up water and change phase before the scan, so the powder should be loaded from a sealed container and scanned promptly. Ask for the reference pattern, the scan range and the detection limit before accepting a “match” statement. XRD is not a routine release test here; it is a qualification and dispute tool, and it is most useful when the question is the hydrate or a second crystalline phase. ## What substitution looks like Substitutions and the signals that expose them | Substitute | What it does | Signal | Test | Calcium carbonate | Raises calcium, adds no chloride; alkaline | Calcium high, chloride low, acid effervescence | Chloride titration, acid test, XRD | Sodium chloride | Adds chloride, dilutes calcium; salty | Chloride high, calcium low, sodium detected | Calcium titration, sodium by ICP-OES | Calcium sulfate | Calcium can sit near the right figure; no chloride | Chloride low, sulfate detected | Chloride titration, sulfate test, XRD | Anhydrous salt sold as dihydrate | Lowers water, raises calcium | Water low, calcium high, assay above range | Karl Fischer, calcium, XRD | Water or brine addition | Raises water, lowers the assay | Water high, calcium and chloride low together | Karl Fischer, mass balance Colour is the weakest signal: white to off-white covers the dihydrate, the anhydrous salt and a carbonate. The stronger signals are the chloride figure, the water figure and the ratio. A certificate that reports appearance and calcium but no chloride has left the most likely substitution untested. The carbonate case is common enough to check first. The calcium carbonate page shows what the other salt's specification looks like; the acid test and the chloride titration separate the two quickly. The comparison page covers the solubility and pH consequences of that substitution. ## How to write identity into the specification - “Calcium chloride dihydrate, CAS 10035-04-8, CaCl₂·2H₂O.” - “Assay 99.0–101.0% by titration, with the basis stated; calcium 27.0–29.0%; water 20.0–25.0% by Karl Fischer.” - “Chloride by silver nitrate titration, reported as a percentage where the form is in dispute.” - “Identification by calcium flame test, chloride precipitation and, where agreed, X-ray diffraction.” - “Particle size ≥95% through 80 mesh; heavy metals and microbiology as listed.” - “No carbonate, sulfate or sodium chloride added; hydrate form and water under change control.” The negative clause gives the laboratory a line to test. A specification that does not exclude the carbonate and the sodium chloride leaves a blend inside the calcium window, and the chloride ratio is the only routine line that catches it. ## Five questions for the supplier - Which hydrate is this lot, and which CAS number is on the certificate? - What are the calcium, chloride and water results, and how do they compare with the formula? - Was the assay expressed as the dihydrate or as CaCl₂, and on which basis? - Can you provide the XRD pattern and the reference, and was the sample protected from humidity? - If the lot is disputed, will you accept a joint re-test on the retained sample? Five direct answers amount to an identity file; a calcium percentage does not. The product hub carries the catalog specification; the COA page shows where each figure sits on the certificate; the grades page compares the hydrate forms; the methods index explains the titration and diffraction tests; the quality page describes the release workflow. ### 01 What the COA for magnesium acetate actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-acetate/coa/ Reviewed: 2026-11-20 A magnesium acetate certificate reports appearance, identification of magnesium and acetate, the titration assay, elemental magnesium, water by Karl Fischer, the heavy-metal panel, microbiology and particle size. The two figures that decide how the rest is read are the assay basis and the water, because the catalog material is a hydrate with 25.0–30.0% water. The sheet is useful only when each line carries its method and its release limit. In one lineThe assay, the magnesium figure and the water are one statement: a 99.0–101.0% titration result means little until the certificate says whether it is on the dried basis and which water figure sits beside it. ## The certificate as a single sheet A release certificate is written against a specification, so each row has three parts: parameter, method and release limit. A result that stands alone cannot be repeated by a second laboratory, and a limit without a result is a promise rather than a measurement. The table below is the catalog specification for the tetrahydrate powder; the batch COA is the record for one lot. Release lines · magnesium acetate tetrahydrate | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | Magnesium reaction and acetate reaction | Conforms to reference | Assay (dried basis) | Complexometric magnesium titration with acetate titration | 99.0–101.0% | Magnesium (Mg) | Complexometric titration or ICP-OES | 11.0–12.5% | Water | Karl Fischer | 25.0–30.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh ## What the assay is measured against The assay is reported on the dried basis. The laboratory measures the powder, determines the water separately, and expresses the salt as a percentage of the dry matter. With water at 27.0% and an assay of 99.5% dried, the powder as weighed is about 72.6% magnesium acetate. The elemental magnesium then follows at about 12.4%, because the anhydrous salt is 17.1% magnesium by mass. A 99.5% figure read as an as-is result would imply more salt than the powder can contain, so the basis is not a footnote; it is the meaning of the number. The water line is measured by Karl Fischer, not by loss on drying alone, because a hydrate releases water differently from surface moisture. The catalog sets 25.0–30.0%. A result at the top of that band carries less salt per kilogram, and a result at the bottom carries more; the magnesium figure moves in the opposite direction. Read assay, water and magnesium as a set, not as three independent passes. The identification line has two halves. The magnesium reaction shows the cation, and the acetate reaction shows the anion; neither alone proves the salt. The assay method should name both titrations, the complexometric magnesium step and the acetate step. If the certificate reports one assay figure with no method, ask which titration produced it and whether the acetate was measured or calculated. ## Release limit, batch result and the word “conforms” A release limit is the gate; a batch result is the measurement. The sheet needs both, in the same row as the method. “Passes specification” is a conclusion, and the reader should be able to reach it from the numbers on the page. What the result column should contain | Parameter | Release limit | Result column | Assay | 99.0–101.0% dried | A measured percentage, with water beside it | Magnesium | 11.0–12.5% | A measured percentage and the method | Water | 25.0–30.0% | A measured percentage by Karl Fischer | Heavy metals | Per element | A figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot | Particle size | ≥95% through 80 mesh | The measured percentage through the sieve “Conforms” is acceptable for identity when the reference and the method are named. It is not acceptable for assay, water or magnesium, which are numbers inside ranges. A certificate that reports a single heavy-metal total has hidden the element that matters; the panel is read element by element. ## What moves between batches Water is the largest moving line. Drying time and the humidity at packing move it within the band, and an opened pouch moves it after release. The assay on the dried basis should stay close to 100%; the as-is mass of salt falls as water rises. A lot with a low magnesium figure and a high water figure is internally consistent, not necessarily out of specification. The acetate-to-magnesium ratio is the second check. A genuine salt holds about two moles of acetate per mole of magnesium. A figure that drifts away from that ratio points to residual acetic acid, a different magnesium source or a blend. Particle size follows the 80 mesh sieve and the mill; colour follows the drying step and the source. A faint acetic odour is normal for the salt and is not a defect on its own. ## When to send a lot to a second laboratory Order an independent test for a new source, a first shipment into a regulated market, or a disputed lot. The useful panel is magnesium by ICP-OES, acetate by ion chromatography, water by Karl Fischer, the heavy-metal panel by ICP-MS, microbiology, and an XRD or FTIR scan for the solid form. Magnesium and acetate together prove the salt; the water closes the mass balance; the certificate’s titration alone does not. Add a sulfate and chloride screen if another magnesium salt is suspected, and ask for the detection limit of each screen. “Not detected” without a limit says something about the method, not the sample. Keep the retained sample with the lot code and send the same sample to the referee. ## What to compare between suppliers Compare six lines: form and CAS number; assay and its basis; magnesium figure and method; water by Karl Fischer; acetate identity and ratio; contaminants, mesh and pack. Two certificates that agree on assay but differ on water are describing different powders. The catalog line sits on the magnesium acetate product page. The tests that separate the salt from sulfate, chloride or citrate are on the identity page; the hydrate arithmetic is on the grades page; the titration is described in the complexometric method note; the release workflow is on the quality page. ### 02 Magnesium acetate tetrahydrate or anhydrous: choosing a grade URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-acetate/grades/ Reviewed: 2026-11-20 Magnesium acetate is supplied as the tetrahydrate powder specified here and as the anhydrous salt. The tetrahydrate carries 25.0–30.0% water and 11.0–12.5% magnesium; the anhydrous form carries about 17.1% magnesium and no water of crystallisation. The choice changes the mass per dose, the way the powder behaves on the filling line and the specification the lot is released against. Granulated and milled versions are process variants of one of those two forms, not a third chemistry. In one lineThe grade is a water decision first: the tetrahydrate carries 25.0–30.0% water and 11.0–12.5% magnesium, while the anhydrous salt carries about 17.1% magnesium and a much stronger pull on moisture. ## The hydrate is part of the identity The catalog form is the tetrahydrate, CAS 16674-78-5, formula C₄H₆MgO₄·4H₂O. The anhydrous salt is the same magnesium acetate without the water of crystallisation, CAS 142-72-3. The two are not interchangeable by weight: a kilogram of the tetrahydrate contains about 110–125 g of magnesium, while a kilogram of the anhydrous salt contains about 171 g. A formula written for one and weighed with the other misses the label claim by a wide margin. Water of crystallisation is part of the lattice, not surface moisture that a dryer can remove at will. The 25.0–30.0% band is the release window for the catalog grade; the lot’s own water figure is what sets its magnesium content. The hydrate name alone does not fix the mass, which is why the certificate and the specification both carry the water line. ## The grades side by side Magnesium acetate grades · what changes between them | Grade | Water | Magnesium | Fits | Watch | Tetrahydrate powder, 80 mesh | 25.0–30.0% (Karl Fischer) | 11.0–12.5% | Capsules, tablets, powder blends | Hygroscopic; water sets the mass | Anhydrous powder | None in the lattice; picks up moisture | About 17.1% | Dry blends, non-aqueous systems | Deliquescent; needs a tight pack | Granulated tetrahydrate | As the base grade | As the base grade | Tablets, sachets | Granulation aids must be declared | Milled tetrahydrate, finer mesh | As the base grade | As the base grade | Capsules, suspensions | Dust, flow, blend segregation The last two rows are process variants, not different chemistry. Milling and granulation change the particle size, the flow and the dust; they do not change the magnesium figure, and they should not be used to explain one. If a supplier offers a “granular grade” with a different assay, ask which base salt it was made from. ## Solubility, flow and the dry room The tetrahydrate is freely soluble in water and gives a solution that is neutral to slightly acidic. It is also deliquescent: left in a humid room, it draws water, cakes and can turn from a free-flowing powder into a sticky mass. The 80 mesh line (≥95% through 80 mesh) describes the standard powder. A granulated form flows differently and is chosen for a tablet or a sachet line, not for a higher assay. The anhydrous salt dissolves readily as well, but it has a stronger driving force to pick up water because it can move toward a hydrate. In a dry blend this is a handling problem; in a tablet it can show up as sticking or as a slow drift in weight. The catalog does not set a bulk density for magnesium acetate; if the fill weight depends on it, ask for the figure on the lot rather than assuming a range. pH is a supporting check, not a grade marker. The solution is neutral to slightly acidic at the concentrations used in a drink mix; a low pH with a normal assay can point to residual acetic acid, and a high pH to a different magnesium source. Measure the solution as it will be used, not only the powder. ## What the grade does to the fill weight The fill weight follows the magnesium figure. To deliver 100 mg of elemental magnesium, the tetrahydrate at 11.0–12.5% needs about 800–909 mg of powder; the anhydrous salt at 17.1% needs about 585 mg. In a 500 mg capsule, the tetrahydrate delivers about 55–62.5 mg of magnesium, while the anhydrous salt delivers about 85 mg. Those are arithmetic estimates; the capsule trial and the lot certificate decide the final fill. The hydrate also changes the powder mass at a fixed magnesium dose, and with it the amount of acetate carried per milligram of magnesium. A stick pack built on the tetrahydrate carries more powder than one built on the anhydrous salt. That is a formulation decision, not a purity difference. The acetate versus citrate comparison takes the taste and label questions further. On the label, the ingredient is “magnesium acetate”; the hydrate state belongs in the specification and on the certificate. A switch from tetrahydrate to anhydrous is a change of mass per dose even when the label name stays the same, so it needs a new fill weight, a new nutrition calculation and a stability check. ## How to write the specification - “Magnesium acetate tetrahydrate, CAS 16674-78-5, C₄H₆MgO₄·4H₂O.” - “Assay 99.0–101.0% on the dried basis by titration; magnesium 11.0–12.5%.” - “Water 25.0–30.0% by Karl Fischer.” - “Identification: magnesium and acetate reactions conform to reference.” - “≥95% through 80 mesh; heavy metals and microbiology as listed.” - “Hydrate state and water range confirmed before the order.” For the anhydrous grade, replace the name, the CAS number, the magnesium range and the water line with the figures for that salt. A specification copied from the tetrahydrate and applied to the anhydrous lot will fail every time, and the supplier will be right. ## When not to switch Do not move to the anhydrous salt only to save mass. If the formula is aqueous or the label claim is fixed, the tetrahydrate is the simpler choice; if the blend must stay dry, the anhydrous form may be worth the handling work, but it needs its own stability data and pack. A switch in either direction is a change control, not a substitution at the balance. Do not accept magnesium citrate as a substitute for magnesium acetate either. It is a different salt with a different taste, solubility and label name; the level-four page sets out the comparison. The product hub carries the catalog specification, the COA page shows where the water and magnesium are reported, the MOQ page covers the packs, the hydrate glossary entry defines the terms, and the quality page describes the release file. ### 02.1 Magnesium acetate vs magnesium citrate: taste, solubility and the label URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-acetate/grades/magnesium-acetate-vs-magnesium-citrate/ Reviewed: 2026-11-20 Magnesium acetate and magnesium citrate are different salts, not two grades of one material. The acetate is freely soluble and carries a salty, vinegar-like note; the citrate is soluble, reads tart and lemony, and buffers over a wider pH range. At the same elemental magnesium dose the acetate needs more powder, and the label must name the salt that is actually in the formula. In one lineThe two salts deliver the same mineral with different counter-ions: acetate dissolves faster and tastes of vinegar, citrate is tart and buffers better, and the label must name the one that is actually in the powder. ## Two salts, two identities The catalog acetate is the tetrahydrate, C₄H₆MgO₄·4H₂O, CAS 16674-78-5. The catalog citrate is the anhydrous salt, C₁₂H₁₀Mg₃O₁₄, CAS 3344-18-1. The formulas explain the first practical difference: two acetate ions balance one magnesium ion, while two citrate ions balance three magnesium ions. The citrate salt therefore carries more magnesium per gram of salt, and the acetate carries more water per gram of powder. Magnesium acetate and magnesium citrate · the catalog forms | Property | Magnesium acetate | Magnesium citrate | Formula | C₄H₆MgO₄·4H₂O | C₁₂H₁₀Mg₃O₁₄ | CAS number | 16674-78-5 | 3344-18-1 | Magnesium | 11.0–12.5% | 14.5–16.4% | Water | 25.0–30.0% by Karl Fischer | ≤2.0% loss on drying | Counter-ion | Two acetate ions per magnesium | Two citrate ions per three magnesium | Taste | Salty, with a vinegar note | Tart and lemony | Label name | Magnesium acetate | Magnesium citrate | Typical format | Capsules, tablets, powder blends | Capsules, sticks, drink mixes The table is a starting point, not a ranking: both are legitimate magnesium sources, and the choice turns on dosage form, taste and label. ## Solubility and the solution Both salts dissolve in water, but not in the same way. Magnesium acetate is freely soluble; it goes into solution quickly and stays there at the concentrations used in a concentrate or a stick pack. Magnesium citrate is soluble as well, but its solubility and its taste depend on the hydrate grade and on the pH. The anhydrous grade is the one specified on this site; the nonahydrate is a different mass per dose. Acetate is the conjugate base of a monoprotic weak acid with a pKa near 4.76, so it buffers in a narrow window around that pH. Citrate has three acid constants and buffers across a wider range, which is why a citrate drink can hold its pH through a fruit system more easily. That buffering is a formulation property, not a reason to switch; it changes the acid, the sweetness and the flavour balance around the salt. At high load, the acetate solution is the easier one to keep clear. The citrate solution can become cloudy or slow to dissolve when the concentration rises or the pH moves; trial the intended concentration rather than the powder’s solubility in water alone. For a clear, high-load concentrate the acetate is simpler; for wider pH stability the citrate brings buffer capacity. ## Taste at the dose, not in a beaker The taste difference starts with the counter-ion. Acetate has a vinegar note, strongest when the pH is low enough for a meaningful fraction of acetic acid to be present; at neutral pH it is milder but still there. Citrate reads tart and lemony, and becomes more sour as the pH falls. Both salts carry the bitterness of the magnesium ion, which grows with dose and is not removed by either counter-ion. In a capsule or a tablet, taste is irrelevant. In a stick pack, a chew or a drink, the matrix decides. A fruit flavour can carry the citrate’s acidity; a milder or savoury system may carry the acetate better. Sweeteners change the balance: a high-intensity sweetener can make the vinegar note more obvious by removing the sugar that would round it off. Trial the finished matrix at the label dose, not a 1% solution. The dose is the other half of the taste question. A 50 mg magnesium stick may taste clean with either salt; at 200 mg the counter-ion becomes a flavour of its own. If the label dose is high and the flavour system is delicate, the choice of salt belongs in the sensory trial, not in a later reformulation. ## Mass per dose and the capsule The magnesium figure sets the mass. At 11.0–12.5% magnesium, 100 mg of the element needs roughly 800–909 mg of acetate powder; at 14.5–16.4%, the citrate needs roughly 610–690 mg. The acetate dose therefore carries more powder and more counter-ion per milligram of magnesium. In a 500 mg capsule, the acetate delivers about 55–62.5 mg of magnesium, and the citrate about 72.5–82 mg. That difference decides the dosage form. A high-dose capsule or a small tablet is easier with the citrate, which packs more magnesium per milligram. A stick pack or a drink can afford the larger acetate mass and gains from its solubility. The acetate grades page sets out the hydrate arithmetic, and the citrate grades page does the same for the anhydrous and nonahydrate forms. Both figures are estimates. The capsule trial, the bulk density of the lot and the certificate decide the final fill, and a change of salt needs a new fill weight rather than a note in the batch file. ## What the label has to say The label names the salt, not the mineral alone. In the EU, the ingredient list uses the permitted name for the magnesium source, and the nutrition declaration reports magnesium in mg and as a percentage of the 375 mg NRV. In the US, the Supplement Facts panel reads “magnesium (as magnesium acetate)” or “magnesium (as magnesium citrate)”, and the magnesium daily value is 420 mg. A formula that switches salt without changing the panel is mislabelled even when the magnesium number is unchanged. The hydrate state is a specification term rather than a label term for the acetate, but it changes the mass per dose and therefore the nutrition calculation. For the citrate, the anhydrous and nonahydrate grades carry different magnesium percentages, so the grade belongs in the specification and the label review. The compliance page covers the permitted-source and claim checks in more detail. A flavour name is not a salt name. “Lemon” on the front does not make the product citrate, and “vinegar” does not make it acetate. The ingredient list is the record, and it has to match the certificate the buyer keeps on file. ## When to choose which Choose the acetate for a clear, fast-dissolving solution where the vinegar note fits the flavour, and for a capsule or tablet where the larger mass is acceptable. Choose the citrate for a smaller capsule, a tart drink or a system that needs buffer capacity across a wider pH range. If the label already names one salt, the other is a change control, not a substitution. Both salts are legitimate magnesium sources; the choice is a taste, mass and label decision. Trial the matrix, check the certificate for the hydrate and the magnesium figure, and write the salt name into the specification before the first order. The magnesium acetate hub and the magnesium citrate hub carry the two specifications; the analytical methods library and the complexometric method note explain the magnesium assay; the quality page describes the release file. ### 03 Magnesium acetate is hygroscopic; the pack decides the shelf life URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-acetate/stability/ Reviewed: 2026-11-20 Magnesium acetate tetrahydrate is hygroscopic and deliquescent. The powder keeps well in a sealed foil pouch or a lined fiber drum in a cool, dry store; an opened pack gains water, cakes and shows a lower magnesium percentage on a mass basis. In solution the salt is stable enough for a drink mix, but water activity, pH and microbial load become the limiting factors. Shelf life is assigned from data for the exact pack and storage condition, not from the certificate. In one lineMoisture is the variable that moves magnesium acetate: the powder is deliquescent, the water line is already 25.0–30.0%, and an open pack can gain water faster than the assay changes. ## The powder: moisture, caking and colour The catalog water range is 25.0–30.0%, measured by Karl Fischer. That is a release window, not a storage allowance. Once the pouch is opened, the powder sees the room’s humidity; the water figure rises, the as-is salt content falls, and the magnesium percentage moves with it. The change can be large enough to matter before the powder looks wet. Deliquescence is the practical failure mode. A scoop left on a bench, a pouch folded over rather than heat-sealed, or a drum liner left open in a humid filling room all give the same result: caking, poor flow and a sticky film on the equipment. The 80 mesh powder has a high surface area, so it responds quickly. Keep the original pack closed, use a desiccant where the store is humid, and let a cold pack equilibrate before opening so that condensation does not form on the powder. Colour is a weak signal. White to off-white covers the normal range; a yellow or brown tint can point to a different magnesium source, iron pickup or a heat step. It is a reason to pull the batch record, not a release test on its own. ## The solution: pH, acetate and the hold time Magnesium acetate is freely soluble, and the solution is neutral to slightly acidic. The acetate ion is the conjugate base of a weak acid with a pKa near 4.76, so the pH of a concentrate depends on how much free acetic acid is present. At low pH, more of the acetate is protonated and the vinegar note becomes stronger; at neutral pH, the note is milder. The solution is not light-sensitive in the way a vitamin or a polyphenol is. Its risks are microbial growth, pH drift and, in a closed pack, the loss of acetic acid to the headspace over a long hold. A ready-to-drink process adds a heat step and a shelf life of its own; validate the hold time and the preservative system in the drink, not only in water. The compliance page covers the label side of a liquid format. ## What drives change during storage Factors that move magnesium acetate during storage | Factor | What it does | Control | Moisture | Raises water; lowers as-is salt and magnesium | Sealed pouch; desiccant; dry store | Heat | Accelerates caking and moisture pickup | Controlled store; cool process | pH in solution | Shifts acetate to acetic acid; changes taste | Buffer and taste trial at target pH | Microbiology | An acetate solution can support growth | Preservative, hygiene, hold-time validation | Metal contact | Can discolour or catalyse change | Stainless or lined contact; avoid iron | Pack seal | A pinhole admits humid air | Seal inspection; liner check These factors overlap. A warm, humid filling room combines heat and moisture, and a tablet made from a powder that has already picked up water will show sticking sooner. The useful question is not whether magnesium acetate is stable, but stable in which pack, at which condition, for how long. ## A stability protocol for the ingredient A pack-specific protocol states the pack, the condition, the time points and the tests. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% relative humidity cover the warehouse; accelerated storage at 40 °C/75% relative humidity stresses the seal. An open-pack in-use arm is more useful than a fourth closed-pack condition for this material, because the failure mode is moisture pickup after opening. Test water by Karl Fischer, assay, magnesium, appearance, mesh and microbiology at each point. For a stick pack or a drink mix, repeat the work in the matrix and at the process pH. The report should show the individual results and identify the pack and the lot family. Light exposure is a secondary arm here; moisture and temperature deserve the attention. ## The finished formula changes the answer A capsule or tablet starts with a low water activity, but the fill can still pick up water from the shell or from a hygroscopic excipient. Check water and appearance after storage, and check the tablet for sticking and capping. A powder blend in a stick pack fails at the seal as often as in the powder; a pinhole is enough to let humid air in. A drink mix combines the salt’s solubility with the taste of the acetate. The pH, the sweetener and the flavour system decide how much vinegar note is perceived. Trial the matrix at the intended dose; a solution that tastes acceptable at 50 mg of magnesium may not at 200 mg. The grades page covers the mass per dose, and the MOQ page covers the pack. ## How the shelf life is set We do not publish one shelf-life number for magnesium acetate, because the pack and the storage condition set it. The assigned retest period belongs on the specification and is supported by the stability file for that pack. A number without a pack, a condition and a test panel is not a shelf life. After the retest period, re-assay the retained sample before extending use. Do not carry a bulk figure across to a repacked pouch, and do not assume the anhydrous grade inherits the tetrahydrate data. The product hub lists the standard packs; the COA page covers the release tests; the microbiology method note describes the counts; the quality page describes the release workflow. ### 04 Magnesium acetate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-acetate/moq/ Reviewed: 2026-11-20 Magnesium acetate ships from a 1 kg foil pouch, and that pouch is the minimum order. The production unit is a 25 kg fiber drum. Standard packs leave within 1–7 days of order confirmation. To turn an enquiry into a firm offer, we need the salt form and hydrate state, the release specification, the pack, the delivery route, the paperwork and the end use. In one lineThe 1 kg pouch is the smallest unit we can seal, label and sample as one lot; the 25 kg drum is the production pack, and the lead time is 1–7 days for either standard pack. ## Why the minimum is 1 kg The 1 kg pouch is a commercial unit, not a sample scoop. It can be heat-sealed, given a lot code and opened for testing without disturbing a production drum. For a formulator, that covers a bench run, a retained sample and an independent identity test. A smaller quantity would have to be split from a larger lot; the split gains a handling record and loses the original pack identity. The drum is the other unit. It cuts the number of times the powder is exposed and the handling per kilogram, but it also locks inventory into a hygroscopic material. A drum held for months in a humid store is a different risk from a pouch used in a week. The right pack is the one that matches the batch size and the storage plan. ## Packs and formats Standard magnesium acetate packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Bench trial, sample, small batch | Heat-sealed; use or reseal promptly | Fiber drum | 25 kg | Production | Liner is the moisture barrier; lot code inside and out | Granulated | On request | Tablets, sachets | Flow changes; declare any granulation aid | Finer mesh | On request | Finer-mesh applications | Dust and segregation; mesh on the COA The catalog powder is ≥95% through 80 mesh. A granulated or finer-milled lot is a new specification line, not a different bag. The pouch and the drum liner are the barriers; the closure is where moisture gets in. A pouch rolled shut is not sealed, and an open liner turns the drum into a humid chamber. ## Lead time and dispatch Standard packs are dispatched 1–7 days after order confirmation. The clock covers picking, the lot documents and handover to the carrier; it stops before transit, import clearance and the customer’s own release. A granulated lot or a special mesh is made to order and needs its own date. Ask for a dispatch date rather than a range. The pouch usually travels as a parcel and the drum as pallet freight. The COA, TDS and SDS should be in the same shipment as the lot, and the pouch should arrive with its seal and lot code intact. ## What a quotation needs Six details turn a request into an offer that can be compared: - Identity. Magnesium acetate tetrahydrate, CAS 16674-78-5, with the hydrate named. - Release specification. Assay and basis, magnesium, water, mesh, heavy metals and microbiology. - Quantity and pack. 1 kg pouch, 25 kg drum, granulated or finer mesh. - Route. Destination country and Incoterm. - Paperwork. COA, TDS, SDS and any importer statement. - End use. Supplement, food or another application, and the market. Without the hydrate state and the water range, the offer describes a family rather than a drum. Commercial terms stay on the quotation and are not published here. ## The sample is a lot, not a demonstration The 1 kg pack is the lot sample. Check identity, assay, water and microbiology before scaling, and retain a sample from the same pack. The lot code must connect the sample, the COA and the offer. A sample with no lot code is a demonstration. A bench quantity below a kilogram is a repack. It comes from a larger lot, gets a new handling record and cannot be presented as the standard pouch. Ask for the split in writing and keep its code with the trial results; the bench powder and the production drum need not be the same lot. ## Terms to settle before the first order Put the commercial and quality terms in one place before the first production order: Incoterm, pack, dispatch window, specification revision, per-lot COA, retained sample, retest period and the route for a change. A quality agreement is easier to negotiate now than after a disagreement. If a lot fails the agreed specification, the evidence is the retained sample and a joint test against the named method. The agreement should name the referee laboratory both sides accept. A photograph of a drum is not a result. The magnesium acetate hub holds the catalog specification; the COA page lists the release tests; the stability page covers moisture, the pack and the retest period; the MOQ glossary entry defines the term; the quality page describes the release file. ### 05 The regulatory file for magnesium acetate URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-acetate/compliance/ Reviewed: 2026-11-20 Magnesium acetate is a magnesium source, and the regulatory file has to show that the form is permitted, the specification and certificate match, the contaminant limits are met at the finished-product dose and the label names the salt correctly. The supplier file supports those checks; the buyer’s regulatory team confirms the route for the destination market. This page sets out the documents and the questions, not a legal opinion. In one lineThe specification describes the salt; the regulatory file shows whether the source is permitted, what the label must say and which limits apply in the destination market. ## What the file contains Four things sit in the file: the specification version for magnesium acetate tetrahydrate, the lot certificate, the destination’s permitted-source and labelling rules, and the change-control record for source, process and pack. The COA reports the lot; the TDS states the specification; the SDS covers handling. None of them decides the legal route. The form matters at the first check. “Magnesium acetate” is a named salt; a generic “magnesium” ingredient, a blend or a different hydrate is not the same entry. Keep the CAS number, the formula and the water range on the same document, so that the material the buyer registers is the material the supplier ships. ## European Union and the United Kingdom In the EU, magnesium acetate is listed among the permitted magnesium forms for food supplements in Part B of Annex II to Directive 2002/46/EC, and among the mineral substances that may be added to foods in Annex II to Regulation (EC) No 1925/2006. That listing is the start, not the whole file: the label, the nutrition declaration and any claim are separate checks. Regulation (EU) No 1169/2011 sets the general labelling rules, and the magnesium nutrient reference value is 375 mg, so the % NRV is calculated against that figure. Contaminants are set by Regulation (EU) 2023/915, which replaced Regulation (EC) No 1881/2006. The health-claim register is Regulation (EU) No 432/2012; the authorised magnesium claims are tied to conditions, including the amount per daily portion. The current consolidated text is the reference, as of this review. For the UK, Great Britain uses the GB register and Northern Ireland follows the EU list; the delivery address decides which applies. ## United States In the United States, the question is how the salt is positioned: a magnesium source in a dietary supplement, or an ingredient in a conventional food. The buyer’s regulatory team confirms the basis for the intended use. On a supplement label, the Supplement Facts panel names magnesium and the source in the form “magnesium (as magnesium acetate)”, and the percentage daily value is calculated against 420 mg for adults and children four years and older. A structure/function statement needs substantiation and the DSHEA disclaimer, and no disease claim is open. The certificate supports the material; it does not support the claim or the label wording. If the finished product is a food rather than a supplement, the route and the labelling are different again, and the buyer confirms them before the artwork is finalised. ## Contaminants and limits The catalog panel is Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg, with APC ≤1,000 cfu/g, yeast and mould ≤100 cfu/g, and E. coli and Salmonella absent. The EU supplement limits for lead, cadmium and mercury are 3.0, 1.0 and 0.10 mg/kg; arsenic has no harmonised EU limit for supplements, so the buyer sets one. Those are limits on the material; the finished-product calculation uses the daily dose and the amount of magnesium acetate per portion. Contaminant limits to confirm for the finished product | Parameter | Typical reference | What the file shows | Lead | 3.0 mg/kg in the supplement (EU) | Lot result, method and finished-product calculation | Cadmium | 1.0 mg/kg in the supplement (EU) | Lot result and any category exception | Mercury | 0.10 mg/kg in the supplement (EU) | Lot result and method | Arsenic | Buyer or market limit | Agreed limit, method and result | Microbiology | Counts and absence | Lot count and absence statement ## Claims and the label Magnesium claims are condition-bound. In the EU, the authorised wording in Regulation (EU) No 432/2012 applies only when the daily portion meets the source condition, and the claim must be used as listed. In the US, a structure/function statement needs substantiation and the disclaimer. The supplier does not write the claim, and this page makes no claim. The brand’s reviewer checks the wording against the form, the dose and the market. Do not use the acetate or citrate name as a claim. The counter-ion is part of the ingredient identity, not a health benefit. No disease-related claim is made for this material on this site. If the artwork names magnesium acetate, the specification and the certificate must name the same salt; a label written for the citrate is not corrected by a footnote. ## Documents for the file The file needs the COA with the assay, magnesium, water and acetate identity; the specification with the hydrate and water range; the SDS; the TDS; allergen, GMO and origin statements where the customer requires them; and a residual-acetic-acid or acidity statement if the specification sets one. Add the destination’s permitted-source check and the label review. The identity page covers the tests behind the certificate, and the magnesium citrate page is the comparison for a different salt. Keep the documents versioned. A specification revision, a new source or a pack change should reopen the file, not sit beside it. The EU regulatory notes collect the framework references, and the quality page describes how the release file is assembled. ## Checklist before the first order - Specification version, CAS number, hydrate state and water range are named. - COA, TDS, SDS, allergen, GMO and origin statements are on file. - The permitted-source listing is checked for the destination and the finished-product category. - The contaminant results are converted to the finished-product dose. - The label and any claim have been reviewed for the destination. - The source, process and pack are under change control. The product hub carries the catalog specification; the COA page explains the lot certificate; the identity page covers the analytical evidence; the compliance file is the bridge between them and the market. ### 06 How we prove a lot is magnesium acetate URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-acetate/identity/ Reviewed: 2026-11-20 A lot is magnesium acetate when five checks agree: the document names the tetrahydrate and CAS 16674-78-5, the magnesium reaction and the acetate reaction both conform, the magnesium-to-acetate molar ratio is about 2:1 with the water figure closing the mass balance, and the XRD or FTIR trace matches the reference. A titration for magnesium alone cannot separate the acetate from a sulfate, chloride, citrate or oxide. In one lineMagnesium and acetate have to agree: a 2:1 molar ratio, a water figure that closes the mass balance and a solid-state pattern that is not sulfate, chloride or citrate. ## The identity layers A certificate can name the right material and still fail to prove it. The layers below are separate questions, and each one needs its own evidence. A supplier who answers only the first has described the paperwork, not the powder. Layers of magnesium acetate identity | Layer | Question | Test | What it proves | Document | Is the salt named? | Name, CAS number, formula, hydrate | Paperwork only | Cation | Is the magnesium there? | Complexometric titration or ICP-OES | The metal, not the salt | Anion | Is the acetate there? | Acetate reaction; ion chromatography | The counter-ion | Ratio | Is it the 2:1 salt? | Magnesium and acetate by moles | The salt, not a blend | Solid state | Is it the right crystal? | XRD; FTIR | The form and the hydrate ## The magnesium-to-acetate ratio The formula is Mg(CH₃COO)₂·4H₂O. Each magnesium carries two acetate ions. The molar masses are 24.305 for magnesium and 59.04 for acetate, and the ratio is the check. A lot with 12.0% magnesium and 57.0% acetate gives 0.494 mol of magnesium and 0.965 mol of acetate per 100 g, a ratio of 1.95. That is consistent with the salt. A ratio below 1.9 points to a blend with a non-acetate magnesium salt, while a ratio above 2.1 points to residual acetic acid or an acetate salt of another cation. The theoretical magnesium content of the tetrahydrate is about 11.3%, and the catalog range 11.0–12.5% brackets it. The anhydrous salt is about 17.1% magnesium. Water is the third term: the catalog sets 25.0–30.0% by Karl Fischer, and the lot’s water figure is what converts the dried assay to the powder as weighed. Do not calculate the hydrate from the name alone; the water and magnesium figures on the lot certificate define the material you received. The ratio is also a useful screen for a blend. Magnesium oxide and magnesium sulfate both raise the magnesium figure, but neither brings acetate with it, so the acetate-to-magnesium ratio falls below 2. A blend of magnesium acetate with magnesium oxide can land inside the magnesium range while failing the ratio. That is why the anion belongs on the certificate. ## X-ray diffraction and the solid state X-ray diffraction answers the solid-state question. The tetrahydrate has a crystalline pattern that differs from the anhydrous salt, and the pattern can show crystalline magnesium oxide, sulfate or citrate if one is present above the detection limit. Ask for the reference pattern and the detection limit before reading a “match” statement; a conformity with no reference has added little. Infrared spectroscopy supports the acetate identity through the carboxylate bands near 1550–1600 and 1400 cm⁻¹ and the water band near 3400 cm⁻¹. It is a quick check, not a purity assay. XRD and FTIR together are stronger than either alone when the question is which solid form is in the drum. Neither method replaces the ratio. XRD tells you which crystal is present; the ratio tells you whether the anions and cations are present in the right proportion. A crystalline sulfate can give a clean pattern and still be the wrong salt. ## What adulteration looks like Likely substitutions and the signals that expose them | Adulterant | What it does | Signal | Test | Magnesium sulfate | Common magnesium source; no acetate | Sulfate reaction; low acetate ratio | Barium chloride; ion chromatography | Magnesium chloride | Common source; very hygroscopic | Chloride reaction; no acetate | Silver nitrate; ion chromatography | Magnesium citrate | Same mineral; different salt | Citrate reaction; ratio shift | Citrate reaction; FTIR; XRD | Magnesium oxide | High magnesium; insoluble | High magnesium; low acetate; XRD peak | XRD; acid-insoluble matter | Maltodextrin or sugar | Dilutes the salt | Low magnesium and acetate; water normal | Mass balance; assay | Sodium acetate | Acetate without magnesium | High sodium; low magnesium | Sodium by ICP-OES Appearance is the weakest signal. White to off-white covers the normal range and a diluted or blended powder can match it. The stronger signals are the anion, the ratio and the water. A certificate that reports appearance and magnesium but not acetate has left the most likely substitution untested. ## How to write identity into the specification - “Name the hydrate, CAS 16674-78-5 and C₄H₆MgO₄·4H₂O on the specification and the certificate.” - “Report magnesium by complexometric titration or ICP-OES and acetate by ion chromatography, not one combined figure.” - “State the acetate-to-magnesium molar ratio and its acceptance window of 1.9–2.1.” - “Report water by Karl Fischer and state whether the assay is on the dried or the as-is basis.” - “Require an XRD or FTIR trace against a named reference when the form is in dispute.” - “Set limits for sulfate, chloride and citrate, and name the method for each.” - “Keep the mesh, heavy-metal and microbiology lines from the release specification.” ## Five questions for the supplier - Which hydrate is this lot, and what are the water and magnesium figures on the certificate? - Was the acetate measured, or calculated from the magnesium titration? Which method was used? - What is the acetate-to-magnesium molar ratio for the lot? - Can you provide the XRD or FTIR trace and the reference it was compared with? - If the lot is disputed, will you accept a joint re-test on the retained sample? Five direct answers amount to an identity file; one assay percentage does not. The product hub carries the catalog specification; the COA page shows where each figure sits on the certificate; the grades page compares the hydrates; the acetate versus citrate page covers the different salt; the XRD method note explains the solid-state check; the quality page describes the release workflow. ### 01 What the COA for potassium chloride actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/potassium-chloride/coa/ Reviewed: 2026-11-20 The certificate for a potassium chloride lot reports appearance, identification of potassium and chloride, assay by titration, potassium by flame photometry, loss on drying, the heavy-metal panel, microbiology and particle size. The assay and the potassium figure answer different questions: the assay measures the salt against a titrimetric standard, while the potassium line measures the element itself. The limits below are the catalog specification, not a batch result; the lot certificate confirms a particular pack. In one lineThe assay and the potassium figure describe the same lot from two directions, and neither is complete without its method, its basis and the loss on drying beside it. ## The certificate as a test report A certificate is only as useful as its weakest line. Each row needs the parameter, the method and the release limit; a row that says “conforms” with no method asks the reader to trust a conclusion. The table below is the catalog gate, not a batch record, and the measured result belongs beside the limit rather than in place of it. The identity pair is potassium and chloride: a lilac flame and flame photometry for potassium, a white silver chloride precipitate for chloride. Neither test rules out sodium chloride, which is why the potassium figure is read against the assay. Release tests · potassium chloride | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | Potassium flame test; chloride precipitation | Conforms to the reference | Assay | Titration | 99.0–101.0% | Potassium | Flame photometry | 52.0–55.0% | Loss on drying | Gravimetric | ≤0.5% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh ## Dried basis, the titration and the potassium line Potassium chloride has no water of crystallisation. The loss on drying is surface moisture, not a hydrate, and the limit is small at ≤0.5%. Small is not zero: at 0.5% water, a 100.0% assay on the dried basis is 99.5% of the powder as weighed. The certificate should print the basis and the measured loss on drying beside it. The assay is commonly argentometric. Chloride is precipitated with silver nitrate and the result is calculated as potassium chloride, which means the number follows the chloride, not the potassium. A trace of sodium chloride adds chloride without adding potassium, so it can lift the calculated assay while the potassium figure stays low. The flame-photometry line is the independent check. Pure potassium chloride is 52.45% potassium, so a 99.5% assay corresponds to about 52.19% potassium. The potassium range here is 52.0–55.0%, which is wider than the assay range can explain. Even a 101.0% assay only supports about 52.97% potassium; a result near 55.0% is a reason to ask how the flame photometry was calibrated, diluted and standardised, not evidence of a richer salt. A 101.0% result is a method allowance, not a purity above 100%. Ask which titration, which end-point and which potassium standard. ## Release limit versus batch result The release limit is the boundary for the lot; the batch result is what the laboratory measured on that lot. A result column filled with the specification range is a copy of the gate, not evidence about the powder. The identity row is qualitative: say what was observed, not only that the sample passed. What the result column should contain | Parameter | Release limit | Result column | Assay | 99.0–101.0%, dried basis | A measured percentage and the basis | Potassium | 52.0–55.0% | A measured percentage by flame photometry or ICP-OES | Loss on drying | ≤0.5% | A measured percentage | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot | Particle size | ≥95% through 80 mesh | The measured percentage through the sieve “Conforms” is a conclusion the reader should be able to reach from the numbers. For heavy metals the evidence is a figure per element, not one combined total; for microbiology it is a count plus an absence statement. A certificate that reports a sum has hidden the element that matters. ## What moves between batches The source moves the trace chemistry. Potassium chloride is recovered from sylvinite or from brine, and both routes can leave sodium, sulfate and bromide in the finished salt. Sodium is the common companion because the two chlorides crystallise together. A low potassium figure with a high sodium result points to sodium chloride; a brine source is a reason to ask for sulfate and bromide by ion chromatography, neither of which is in the catalog. Drying and milling move the rest. The 80 mesh figure is a finishing specification, so it changes when the mill, the sieve or the granulation step changes. Moisture pickup in a humid filling room can cake the powder and alter its flow before the pack is sealed. Colour is the weakest line: white to off-white is a wide window, and a grey or yellow tint is a question about the source and the filters, not an identity failure by itself. The lot code on the certificate should match the pouch, the drum and the retained sample. A certificate that cannot be tied to a pack describes a sample, not a delivery. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a potassium figure that does not fit the assay, or a disputed identity. The useful panel is not a full repeat of the certificate: assay by argentometric titration, potassium by flame photometry or ICP-OES, chloride by ion chromatography, loss on drying, ICP-MS for the metal panel, microbiology, and the pH of a 5% solution. Add X-ray diffraction when sodium chloride is suspected, and sulfate and bromide when the source is brine. Ask the laboratory to state its detection limit for each screen. A “not detected” line without a limit is evidence about the method's sensitivity, not about the sample. The sample tested should be the retained sample, the report should name the lot, and a disputed result should be settled on the sealed pack rather than on an open scoop. The methods index describes the titration and photometry techniques; the quality page covers the release and retained-sample workflow. ## What to compare between suppliers Put six lines side by side: the salt and CAS number, the assay with its basis, potassium and chloride on the same lot, the loss on drying, the contaminant and micro panels, and the mesh with the pack and lot code. The second layer is traceability: the certificate should name the source and the process steps. The catalog specification sits on the potassium chloride product page. The tests that separate the salt from sodium chloride are on the identity page; the mesh and granulation choices are on the grades page; the difference from the citrate is set out on the chloride versus citrate page. ### 02 Potassium chloride grades: mesh, granulation and the fill URL: https://nutrition.rainwoodbio.com/products/minerals/potassium-chloride/grades/ Reviewed: 2026-11-20 Potassium chloride has one salt form and no hydrate, so a grade is a particle size and a purity route, not a different potassium content. The catalog material is a white powder at ≥95% through 80 mesh; a granulated form is available on request for flow. Both carry the same theoretical 52.45% potassium, so the choice turns on dust, flow, dissolution and the dosage form rather than on potency. In one linePotassium chloride has no hydrate to choose, so the grade is the mesh and the granulation: the potassium figure stays at 52.45% while the flow, the dust and the fill change. ## Why the grade question looks different here Many mineral salts reach the buyer as a hydrate, and the hydrate then becomes the first grade decision. Potassium chloride does not: it crystallises as the anhydrous salt, KCl, CAS 7447-40-7, with a formula mass of 74.55. There is no hydrate to specify and no water of crystallisation to shift the figure. The salt name is complete; what remains is the physical form and the purity route. Because the chemistry is fixed, a buyer may assume any white potassium chloride powder is interchangeable. It is not. An 80 mesh powder, a granulated product and a technical-grade salt can share the same formula and still behave differently in a hopper, a capsule or a stick pack, and only one of them belongs in a food or supplement. The grade is the finishing specification plus the purity standard, not a second salt. Potassium citrate is sold as a monohydrate or an anhydrous salt, and that choice moves the potassium per gram; the chloride has no such choice, so its mesh question matters more. The potassium citrate page shows the hydrate arithmetic on the other side. ## Powder, granulation and the purity route The catalog offers the 80 mesh powder as the standard line and granulation on request. Both are potassium chloride; the particle-size distribution changes the dust, the flow and the dissolution time. A granulated product is not a diluted one. Potassium chloride formats in the catalog | Format | Particle size | Flow and dust | Typical use | Pack | Powder | ≥95% through 80 mesh | Free-flowing; some dust in handling | Capsules, dry blends, stick packs | 1 kg pouch; 25 kg drum | Granulated | Coarser, on request | Better flow; less dust; slower to dissolve | Tablets, blends, shaker and salt applications | 25 kg drum The mesh is a release line, so it belongs in the purchase order and on the certificate. “Potassium chloride, powder” without a mesh lets the supplier ship a coarse or a fine lot, and the fill trial may fail for a reason unrelated to the assay. If the process needs a specific cut, write the sieve and the percentage through it. ## Solubility, caking and the chloride solution Potassium chloride is freely soluble in water, about 34 g per 100 mL at 20 °C, and the solution is neutral. The neutral solution suits a stick pack or an electrolyte blend because the salt does not shift the pH. The same chloride makes the solution aggressive to ordinary 304 stainless steel, so a plant that holds a concentrated brine needs 316L contact parts and a cleaning regime that removes the residue. The solid is hygroscopic at high humidity. Above roughly 85% relative humidity at room temperature it draws water, and a powder at 80 mesh has enough surface area to cake before a granulated product does. Caking is physical, not a chemical change, but it costs the flow the filling line depends on. An opened pouch in a humid room is the usual route: the top layer gains water and the next scoop is a lump. Light is not a degradation driver for this salt. A clear container is still a poor choice for moisture. The pack should be a moisture barrier, and the store should be dry and stable in temperature; a cold pouch brought into a warm room can collect condensation on the powder before it is opened. ## The potassium arithmetic and the dosage form The label dose is elemental potassium, not salt weight. One gram of potassium chloride carries 524.5 mg of potassium, so a 99 mg potassium serving needs 189 mg of the salt and a 500 mg serving needs 953 mg. A 500 mg capsule fill carries about 262 mg of potassium as the chloride; the same 500 mg as potassium citrate monohydrate would carry only about 181 mg. The dosage form decides the grade. A capsule or a direct-compression tablet wants a free-flowing powder with a consistent bulk density, and a granulated product can feed a tablet press better. A stick pack or a dry blend usually wants the 80 mesh powder, because it disperses quickly when the consumer adds water. A granulated product in a stick can leave a gritty residue and take longer to clear. Taste is part of the fill decision. Potassium chloride is salty with a bitter, metallic note that grows with the dose; at 953 mg per stick it is hard to hide behind a fruit flavour. The chloride load and the pH consequences are set out on the chloride versus citrate page. In an electrolyte blend, the potassium chloride may sit beside potassium citrate, sodium chloride and magnesium salts. Each contributes potassium or sodium, the label has to name each source, and the blend's flow belongs to the blend, not the chloride alone. ## What to write into the specification - “Potassium chloride, CAS 7447-40-7, KCl, food or supplement grade.” - “Assay 99.0–101.0% by titration, with the basis stated on the certificate.” - “Potassium 52.0–55.0% by flame photometry; report the method and the standard.” - “Loss on drying ≤0.5%; heavy metals and microbiology as listed.” - “Particle size ≥95% through 80 mesh, or the agreed granulation cut.” - “Pack: 1 kg foil pouch or 25 kg fiber drum with a closed liner.” - “Store sealed and dry; the pack and the storage condition are part of the specification.” ## When another grade or salt is the wrong choice A technical grade is the wrong choice for any food or supplement use; its contaminant and trace-metal profile was not set for that route. A granulated product is the wrong choice where the powder must dissolve quickly in a stick or a dry mix, unless a trial shows the granulation clears in the intended time. And a coarse cut is the wrong choice for a capsule fill that was sized on an 80 mesh powder. Potassium chloride itself is the wrong salt where the formula cannot carry chloride or needs an alkaline buffer. In that case the citrate is the starting point, not a chloride with a pH adjuster added afterwards. A switch in either direction changes the mass, the taste, the pH and the label, and it belongs in change control. The catalog line is on the potassium chloride product page; the release tests are on the COA page; the pack and the moisture question are on the stability page; the release workflow is described on the quality page. ### 02.1 Potassium chloride vs potassium citrate: the chloride load, pH and the label URL: https://nutrition.rainwoodbio.com/products/minerals/potassium-chloride/grades/potassium-chloride-vs-potassium-citrate/ Reviewed: 2026-11-20 Potassium chloride is 47.55% chloride and gives a neutral solution; potassium citrate monohydrate carries no chloride and gives an alkaline, buffered solution. At the same potassium dose the chloride is the smaller fill, 189 mg against 274 mg for 99 mg of potassium, but it adds about 90 mg of chloride and does not buffer the formula. The label names the salt, declares potassium as the element and handles chloride separately; the EU “salt” figure is not a chloride figure. In one linePotassium chloride delivers the same potassium in a smaller, chloride-bearing, pH-neutral fill, while the citrate delivers it in a larger, chloride-free, alkaline one; the label has to name which salt was used. ## The chloride load, counted per serving The chloride figure follows from the formula. Potassium chloride is 74.55 g/mol, 52.45% potassium and 47.55% chloride; one gram delivers about 475 mg of chloride. A 99 mg potassium serving weighs 189 mg and carries 90 mg, and a 500 mg serving weighs 953 mg and carries 453 mg. The citrate delivers none. At 36.16% potassium, the same 99 mg serving needs 274 mg of the citrate and carries no chloride. The salts can be matched on potassium, but not on potassium and chloride together: if chloride is wanted, the citrate cannot supply it; if it is unwanted, the chloride cannot avoid it. Chloride is an essential nutrient with reference figures worth knowing if the panel declares it: the EU reference intake is 800 mg and the US Daily Value is 2,300 mg, as of this review. A 90 mg serving is about 11% of the EU figure and 4% of the US one. Table salt is 60.66% chloride, about 607 mg per gram, so potassium chloride at 475 mg is not far behind. ## Potassium per gram and the size of the fill Potassium chloride is the more concentrated salt: 524.5 mg of potassium per gram against 361.6 mg for the citrate monohydrate. The ratio is 1.45, so the same dose needs about 45% more citrate mass: 99 mg of potassium is 189 mg of the chloride or 274 mg of the citrate, and 500 mg is 953 mg or 1,383 mg. Potassium chloride and potassium citrate monohydrate at equal potassium | Property | Potassium chloride | Potassium citrate monohydrate | Formula | KCl | C6H5K3O7·H2O | Potassium | 52.45% | 36.16% | Chloride | 47.55% | None | Salt for 99 mg potassium | 189 mg | 274 mg | Chloride at that serving | 90 mg | 0 mg | Solution | Neutral, no buffer | Alkaline, buffered That difference decides the dosage form. A 500 mg capsule holds 262 mg of potassium as the chloride but only 181 mg as the citrate, so a 250 mg capsule target may fit the chloride and not the citrate. A stick pack has more room, but the mass still moves the flavour and the fill time. The EU source-of-potassium claim needs 300 mg per portion, or 572 mg of the chloride or 830 mg of the citrate. That is claim arithmetic, not a health claim; the wording is reviewed separately. ## pH: a neutral salt against an alkaline buffer Potassium chloride is the salt of a strong acid and a strong base. Its solution sits near pH 7 and has no buffering capacity. Potassium citrate is the salt of a weak acid; the citrate anion takes up protons, so the solution is alkaline and resists a fall in pH. In an acidified drink the difference is immediate. The citrate neutralises part of the acid and holds the pH up; replacing it with the chloride removes that reserve, so the same acid addition lands lower. Taste, colour and preservative performance can move with it. In a neutral or alkaline matrix the chloride is close to inert, while the citrate can push the pH higher. This is a formulation property, not a health claim; no urinary or renal effect is asserted. The chloride also pits 304 stainless steel, so a brine line needs 316L contact parts, short holds and a cleaning regime. ## What the label has to say The ingredient list names the salt that was weighed; “potassium” alone is not a salt name. The panel declares elemental potassium: in the EU against the 2,000 mg reference intake, in the US against the 4,700 mg Daily Value. The salt weight is not the potassium weight, and a panel that carries the salt weight on the potassium line overstates the nutrient by about 1.9 times for the chloride. Chloride is a separate line. If declared, the EU reference intake is 800 mg and the US Daily Value is 2,300 mg. Chloride is not “salt”: in the EU salt is sodium × 2.5, so potassium chloride contributes no salt figure while the chloride load stays. That is a labelling fact, not a licence to call the product salt-free without checking the conditions. The route changes the label too. In the EU, potassium chloride is E 508 as a food additive and one of the potassium forms for supplements under Annex II of Directive 2002/46/EC; the two files are separate. ## What the switch does in a formula Electrolyte blends often use both salts: the citrate adds potassium and a buffer, the chloride adds potassium and a salty note without moving the pH. If both are present, the label names both, the potassium lines add and the chloride line reflects only the chloride salt. Taste is the second consequence. Potassium chloride is salty with a bitter, metallic edge that grows with the dose; at 953 mg per stick it is hard to mask. The citrate is saline and alkaline, easier in a fruit drink but heavier. Only a trial at the real dose settles it. Both dissolve freely at a normal serving, the chloride at about 34 g per 100 mL and the citrate much higher. A concentrated chloride stock is the more corrosive one, and neither salt preserves a drink. ## When to choose which Choose the chloride when the fill must be small, the form is a tablet or dry blend, a salty note is acceptable and chloride is allowed. Choose the citrate when the formula is aqueous, chloride-free or needs an alkaline buffer, and the extra mass can be carried. The switch is change control: it moves the molecular weight, potassium per gram, chloride load, pH, taste and label together. A product built on one salt should not be moved to the other without a new specification, a new fill calculation and a label check. The catalog specification is on the potassium chloride product page; the citrate is on the potassium citrate page; the mesh and granulation choices are on the grades page; the analytical methods are collected in the methods index; the release workflow is on the quality page. ### 03 Potassium chloride stability: moisture, caking and the pack URL: https://nutrition.rainwoodbio.com/products/minerals/potassium-chloride/stability/ Reviewed: 2026-11-20 Potassium chloride is chemically stable: it does not hydrolyse, it has no hydrate to lose, and light does not degrade it. What changes is the water content and the physical state. The powder takes up moisture at high humidity, cakes and loses flow, and in solution the chloride attacks ordinary steel while the neutral liquid supports microbial growth. The pack and the storage condition, not the chemistry, set the shelf life. In one linePotassium chloride does not degrade on the shelf; it takes up water, cakes and loses flow, and in solution the chloride attacks steel while the neutral liquid supports microbes. ## The powder: moisture, caking and flow The catalog limits loss on drying to ≤0.5%. The salt is anhydrous, so the water is surface moisture, not a hydrate; there is no crystal water to drive off. A lot at the limit has half a percent of water, enough to make an 80 mesh powder sticky in a humid room. Potassium chloride is hygroscopic at high humidity. Above roughly 85% relative humidity at room temperature it draws water, and the particle surface starts to dissolve in the film it has absorbed. The particles stick, the bulk density changes and the powder bridges in the hopper. A granulated product has less surface and cakes more slowly, but it is not immune. The pack is the barrier. The 1 kg foil pouch holds only while the seal is intact; a pouch opened and folded over is not resealed, and the headspace holds humid air. The 25 kg fiber drum relies on its liner, and the liner has to be closed between uses. A desiccant can dry a small headspace but cannot rescue a pinhole. Cold storage is not needed: a cold pouch brought into a warm room collects condensation. ## The solution: chloride, steel and microbes Potassium chloride dissolves freely and gives a neutral solution. There is no hydrolysis and no pH drift from the salt, so the solution offers no chemical hurdle to microorganisms. A neutral mineral solution is a growth medium, not a preservative; validate the preservative system, the hold time and the fill temperature. Chloride solutions pit ordinary 304 stainless steel, especially in a crevice or a pump seal. A brine line should use 316L contact parts, short hold times and a cleaning regime that removes the residue. The corrosion product can put iron or chromium into the batch. Light is not a degradation driver for this salt, so the pack choice is about moisture. In a formula, other ingredients can move the pH, and the chloride remains the counter-ion; a matrix change can still haze the drink. ## What drives change Factors that move potassium chloride in storage and in formula | Factor | Effect | Control | Humidity above about 85% | Water uptake, caking, weight gain | Foil pouch, closed liner, dry store | Temperature cycling | Condensation on the powder | Stable store; equilibrate before opening | Open pack | Humid headspace at every scoop | Reseal; single-use pouches; desiccant | Chloride on 304 steel | Pitting, metal pick-up in solution | 316L contact parts; short hold; cleaning | Neutral solution | Microbial growth | Preservative; validated hold; fill control | Compaction in the bag | Lumps; flow loss; mesh change | Do not stack high; control humidity The factors reinforce one another. A warm, humid store raises the uptake rate, an opened pouch adds a fresh humid headspace at every scoop, and a caked powder needs more handling. The useful question is not whether potassium chloride is stable, but how much water the pack lets in over the shelf life. ## A stability protocol for the ingredient A useful protocol states the pack, the storage condition, the time points and the tests. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% relative humidity cover the warehouse; accelerated storage at 40 °C/75% relative humidity stresses the pack. Add a humidity challenge above 85%, and run the same protocol on the granulation. Weigh the pouch as well as testing the powder; a weight-gain curve is the most sensitive line for a hygroscopic salt. Test assay, potassium, chloride, loss on drying, appearance and mesh or flow at each point, plus microbiology for a liquid. For a solution, add pH, chloride and a corrosion check. Report the individual results and identify the pack. Time points at 0, 3, 6, 12 and 24 months suit a bulk ingredient; the pack and the climate set the schedule. Say whether the sample came from a sealed pack or an opened one. ## The finished formula changes the answer A capsule or tablet protects the powder from the room, but not from the excipients. The shell and filler can carry water, and a hygroscopic fill can pull water through the shell over months. Check the fill's water, the capsule's appearance and the tablet's hardness after storage. A tight HDPE pack with a desiccant, or a blister, is usually needed. A stick pack lives or dies on its seal. A pinhole in the foil lets humid air into a small headspace, and the powder has nowhere to shed the water. Inspect the strip and test the seal strength. In a drink mix, the neutral solution needs a preservative and a validated hold time, and the chloride can attack the filler and the pump seals. An electrolyte blend is its own case. A mixture of potassium chloride with potassium citrate or sodium chloride can take up water at a lower humidity than either salt alone, so test the blend. A salt substitute is the same at a higher dose: the shaker exposes a large surface, and caking is the first failure the consumer sees. ## How the shelf life is set We do not publish a single shelf-life number for potassium chloride, because the pack and the storage condition set it. The assigned retest period belongs on the specification and is supported by the stability file for that pack, with water gain, flow and mesh as the trend lines. After the retest period, re-assay the retained sample before extending use, and check the loss on drying against 0.5%. Do not carry a bulk figure across to a repacked pouch. The product hub lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the methods index describes the assays; the quality page describes the release and retest workflow. ### 04 Potassium chloride: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/potassium-chloride/moq/ Reviewed: 2026-11-20 Potassium chloride ships from a 1 kg foil pouch, and that pouch is the minimum order; bulk orders use the 25 kg fiber drum. We quote 1–7 days for dispatch of the standard pack. A quotation becomes firm enough to compare once six details are fixed: the mesh cut, the assay basis, the quantity and pack, the destination and Incoterm, the document set and the end market. In one lineOne kilogram is the minimum because it is the smallest pack that can be sampled, tested and traced as a lot, and the mesh has to be named with it. ## Why the minimum is 1 kg One pouch is enough for a bench trial, a reserve sample and an independent check of identity. It is light enough to travel as a parcel, which helps a formulator who needs material before the production plan is signed off. Each pouch carries a lot code and its certificate, so the trial powder and the later production powder can be traced back to the same release. That is what separates a qualification sample from a scoop taken out of a drum. Below a kilogram the material is normally split out of a larger lot, which adds a handling step, breaks the original pack identity and complicates traceability without altering the salt itself. Bulk moves in the 25 kg fiber drum: handling cost per kilogram falls, but inventory and storage time rise. The minimum is therefore set by the pack, not by a volume target. KCl has no hydrate form to choose, but it does have a mesh choice. An 80 mesh powder and a granulated grade are separate purchase items even when both carry the same CAS number, so the minimum order should name the cut as well as the pack. A 1 kg pouch of the wrong cut is still the wrong lot for the trial. ## Packs and formats Standard potassium chloride packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal the pouch after opening | Fiber drum | 25 kg | Production | Lined; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Different particle profile The catalog cut is an 80 mesh powder, with ≥95% passing 80 mesh. Granulation is a separate finishing specification rather than a packing option. If the dosage form calls for a coarser or freer-flowing powder, raise it before the quotation, because changing the particle-size line can also change the lead time. A sieve cut outside the standard band is another purchase item, with its own release test. The pack has to suit the storage conditions. A foil pouch provides the moisture barrier for a small quantity, while the fiber drum depends on its liner for bulk. Once a drum is opened and the liner is folded back, the pack is no longer sealed, and powder in a humid filling room can take up water. The quotation should describe pouch, drum and liner, not just the net weight. ## Lead time and dispatch For dispatch, we quote 1–7 days from confirmation of the order. That window runs through picking and document preparation to handover with the carrier. It stops before transit, customs clearance and the buyer's own quality release. A made-to-order granulation, a non-standard sieve or a special pack adds time, which the quotation should show as a separate line. Ask for a dispatch date rather than a range. A 1 kg pouch usually moves as a parcel; the 25 kg drum is palletised. The Incoterm sets which side books the freight and which side clears entry. Certificates and the rest of the lot paperwork should travel with the consignment, not follow it to the port. If the material feeds a production run, the receiving laboratory needs the certificate before the drum is opened, not after the first batch is weighed. ## What a quotation needs A quotation is usable for comparison once six items are on it: - Product and salt. Potassium chloride, CAS 7447-40-7, KCl. - Specification. Assay and its basis, potassium, mesh, loss on drying, heavy metals and microbiology. - Quantity and pack. A 1 kg pouch, a 25 kg drum, or a granulation agreed for the trial. - Destination and Incoterm. Country, delivery point and the named trade term. - Documents. COA and specification, SDS, plus any statement the importer's market requires. - Intended use and market. Whether the material goes into a supplement, a food or another application, and the country where it will be sold. A quotation that leaves out the mesh or the assay basis cannot be compared. The same potassium chloride can be offered as an 80 mesh powder or as a granulation, and an assay result can be reported on the dried basis or on the material as weighed. Those are specification differences, not presentation details, and they belong in the offer rather than in a later email. Commercial terms sit in the quotation, not on this page. ## The sample is a lot, not a demonstration The 1 kg pouch is the qualification sample. Check assay, potassium, loss on drying, mesh and microbiology before scaling up, and retain material from that same pouch as the reserve. The lot code on the sample, the certificate and the quotation should agree. A sample with no traceable lot is a demonstration, not a qualification. Anything under a kilogram is a repack rather than the catalog pouch. It is drawn from a bulk lot, logged on a separate handling record and cannot be sold as the 1 kg foil pack. Put the split request in writing and file its lot code alongside the trial data. Bench powder and production-drum powder may come from different lots even when both meet the same specification. For a granulated trial, take the sample from the granulation run rather than from the powder, since the particle-size distribution is the variable under test. A powder that was sieved in the laboratory is not the same as a production granulation. ## Terms to settle before the first order Keep the trading terms and the quality terms on one quotation: Incoterm, pack size, dispatch window, specification revision, a certificate for every lot, retained sample, retest period and a change-control route. Settle them in a quality agreement ahead of the first production order; the same discussion is much harder once a dispute is open. If a lot falls outside the agreed specification, the case rests on the retained sample and a re-test both sides run to the named method; a photograph of the drum proves nothing. The quotation and the quality agreement should name the referee laboratory, say which laboratory is acceptable to both parties and state who pays for it. A return based only on appearance is difficult to defend either way. For the catalog specification, see the potassium chloride product hub. Release tests sit on the COA page, the market file is on the compliance page, the assays are described in the methods index, and the quality page explains the release workflow. ### 05 The regulatory file for potassium chloride URL: https://nutrition.rainwoodbio.com/products/minerals/potassium-chloride/compliance/ Reviewed: 2026-11-20 Potassium chloride can reach a market as a food additive, E 508 in the European Union, or as a mineral source in a food supplement, and the two routes carry different lists, limits and labels. The catalog specification and the lot certificate describe the material; they do not choose the route. The buyer's regulatory team confirms the route for the destination, and this page lists the file that route needs. In one lineThe specification describes the salt; the route, the limits and the label are decided by the destination, and the buyer's regulatory team confirms them. ## The four checks A complete file answers four questions: is the salt permitted on the route the finished product uses, are the contaminants inside the limit at the real dose, does the label name the material the market requires, and is the claim allowed. The four are separate tests; one certificate does not settle them. Potassium chloride sits on two roads. As a food additive it is E 508; as a food supplement it is a potassium source under the supplement rules. The lists, purity criteria and labels differ, so the first decision is the route, not the assay. An additive-compliant drum is not automatically a supplement file, and the reverse. The file should also carry the statements the importer will ask for: allergen and GMO positions, origin, contaminant results and packaging. Name a missing statement before the order, not at the port. A versioned document list is easier to audit than undated PDFs. ## European Union For the supplement route, Directive 2002/46/EC sets the framework, and Annex II lists the permitted mineral forms; potassium chloride is one of the potassium forms named there, as of this review. The current consolidated text decides the detail, and the buyer's team checks the grade. The additive route runs through Regulation (EC) No 1333/2008, where potassium chloride is E 508, with specifications in Regulation (EU) No 231/2012. Labelling follows Regulation (EU) No 1169/2011: the ingredient list names the salt, and the nutrition declaration states potassium in milligrams and as a share of the 2,000 mg reference intake. If chloride is declared, the reference intake is 800 mg. The salt figure is sodium × 2.5, so potassium chloride contributes no sodium and no salt figure even though it carries chloride. Contaminants fall under Regulation (EU) 2023/915, and claims under Regulation (EU) No 432/2012. Each instrument can change; check the current text as of this review. The EU regulatory notes collect the references. ## United States In the United States, potassium chloride is affirmed as generally recognized as safe for its listed food uses under 21 CFR 184.1622. A dietary supplement is a separate route: the seller has to show that the material is a lawful dietary ingredient for the intended use, and that basis belongs in the supplier file. The Supplement Facts panel declares elemental potassium against the 4,700 mg Daily Value, and the ingredient list names the salt, for example “Potassium (as potassium chloride)”. The 21 CFR 111 current good manufacturing practice expectations apply. A structure/function statement is the brand's, not the supplier's, and it carries the DSHEA disclaimer; a disease claim is not open. California Proposition 65 is triggered by the daily dose, and a lot inside a raw-material limit can still need a warning at a high intake. The Proposition 65 entry explains the exposure calculation. ## Contaminants and limits The contaminant panel is a finished-product calculation. The table below is the usual starting point for a supplement file, as of this review; the destination text and the daily dose decide the final limit. Contaminant limits to confirm for the finished product | Element | EU supplement reference | US reference | What the file should show | Lead (Pb) | 3.0 mg/kg in the supplement as sold | No federal supplement limit; state rules apply | Lot result, method, limit and the finished-dose calculation | Cadmium (Cd) | 1.0 mg/kg | No federal supplement limit | Lot result and any category exception | Mercury (Hg) | 0.10 mg/kg | No federal supplement limit | Lot result and method | Arsenic (As) | No EU-wide supplement figure; national rules vary | No federal supplement limit | The agreed limit, method and finished-dose calculation The dilution factor decides whether the drum result is enough. Potassium chloride is often a large share of a capsule or stick pack, so little other mass absorbs its contribution; a comfortable drum ceiling can be close to the finished limit in a high-dose sachet. Multiply the lot result by the salt's share of the serving and compare. Chloride is not a contaminant here; it is the counter-ion and part of the identity. Sodium is a normal trace companion in a salt from sylvinite, and a high sodium result lowers the potassium figure per gram. Sulfate and bromide are plausible companions in brine; ask for results and write the ceiling. ## Claims The EU authorises potassium claims in Regulation (EU) No 432/2012, each with conditions. A “source of potassium” claim needs 15% of the 2,000 mg reference intake per portion, or 300 mg of potassium; that is 572 mg of potassium chloride or 830 mg of the citrate monohydrate. The wording is about a contribution to normal function, never a disease outcome, and the brand's reviewer checks it. A sodium-reduction claim is judged on the finished product's sodium figure, not on the presence of potassium chloride. Replacing sodium chloride lowers sodium and may lower the declared salt figure, but the chloride load stays; the claim conditions belong to the brand's reviewer. In the US, a structure/function statement needs substantiation and the DSHEA disclaimer. This page makes no health claim for potassium chloride. It describes the material and the framework; the claim belongs to the brand that prints it. ## The document pack - Batch certificate covering assay and its basis, potassium, loss on drying, contaminants and microbiology. - Specification and technical data sheet naming the salt, the mesh and the pack. - A safety data sheet, allergen, GMO and origin statements. - Sodium, sulfate and bromide results where the source is sylvinite or brine. - The route basis for the supplement or additive use, where the buyer needs it. - Specification revision and change-control record. ## Checklist before the first order - The salt, CAS number and specification version are named. - COA, TDS, SDS, allergen, GMO and origin statements are on file. - The contaminant results are converted to the finished-product dose. - The label names the salt and declares potassium on the right basis. - The claim and the route have been reviewed for the destination. - The pack and the storage condition are written into the specification. - The source, process and specification are under change control. The product hub carries the catalog specification; the COA page explains the lot certificate; the identity page covers the analytical evidence; the methods index describes the assays; the quality page describes the release file. ### 06 How we prove a lot is potassium chloride URL: https://nutrition.rainwoodbio.com/products/minerals/potassium-chloride/identity/ Reviewed: 2026-11-20 A potassium chloride lot is the named material when the document, the potassium figure, the chloride figure and the solid-state pattern agree. The theoretical composition is 52.45% potassium and 47.55% chloride, a 1:1 molar ratio; the potassium line by flame photometry and the chloride line by titration or ion chromatography should land on that ratio. Sodium is the substitution to screen for, because sodium chloride is white, salty and cheap. One assay percentage cannot separate the salt from a sodium chloride blend. In one lineIdentity is the potassium and the chloride agreeing on the same lot, with the 1:1 ratio and the diffraction pattern separating potassium chloride from sodium chloride. ## The identity layers A certificate can name the right material and still fail to prove it. The layers below are separate questions, and each one needs its own evidence. A supplier who answers only the first has described the paperwork, not the powder. Layers of potassium chloride identity | Layer | Question | Test | What it proves | Document | Is the salt named? | Name, CAS number, formula | Paperwork only | Potassium | How much potassium? | Flame photometry or ICP-OES | The element, not the salt | Chloride | Is the counter-ion chloride? | Argentometric titration or ion chromatography | The anion | Ratio | Do the two figures agree? | Potassium and chloride on the same lot | Consistency of the salt | Solid state | Which crystalline phases are present? | X-ray diffraction | Potassium chloride against sodium chloride The first layer is necessary and quick. The next four are analytical, and they have to be run on the same lot. A potassium figure from one batch and a chloride figure from another describe a hypothetical material, not a drum. ## The 1:1 ratio and the mass balance Potassium chloride is KCl: one potassium and one chloride. On the theoretical formula that is 52.45% potassium and 47.55% chloride, a mass ratio of 1.103. Those two figures are the identity arithmetic, and they should be consistent on the same certificate. The two lines are the identity arithmetic; the ratio says whether they belong together. The ratio catches the common substitutions. If sodium chloride is blended in, potassium falls and chloride stays high relative to it, and sodium appears. A 10% sodium chloride addition moves potassium down by about five points and leaves chloride near 49%, so the potassium-to-chloride ratio falls from 1.10 to about 0.97. If potassium sulfate or carbonate is added, chloride falls against potassium and the ratio rises. Neither substitution is visible in a single assay percentage, which is why the two lines have to be read together. The assay basis is a separate question. Potassium chloride has no water of crystallisation, so the loss on drying is surface moisture and the dried-basis correction is small, but it is not zero. A 100.0% result on the dried basis at 0.5% water is 99.5% of the powder as weighed. The certificate should state the basis and the loss on drying, and the identity arithmetic should use the same basis for both elements. The COA page sets out that correction. The ratio also catches a physical blend that was built to pass the assay. A powder made from potassium chloride and a little sodium chloride can be adjusted to land inside the assay range, but its potassium figure falls and its sodium figure rises. The chloride titration sees total chloride; the potassium line sees the element. ## X-ray diffraction: the solid-state check Potassium chloride crystallises in the rock-salt structure, the same cubic arrangement as sodium chloride, but the two have different lattice spacings. The diffraction peaks therefore sit at different angles, and a pattern can show sodium chloride as a second crystalline phase beside the potassium chloride. That is a different question from the wet chemistry: the ratio infers a blend from two numbers, while diffraction looks at the phases in the powder. XRD is not a purity assay. It sees crystalline phases above its detection limit, not amorphous material, not a thin coating and not an organic adulterant that is present in small amounts. The sample preparation changes what the pattern represents, and a “match” statement without the reference pattern and the detection limit adds little. Ask for the reference, the limit and the preparation method before reading the conclusion. The methods index explains what the technique can and cannot see. For a disputed lot, XRD plus potassium plus chloride plus sodium is stronger than any one of them. XRD is not a routine release test for this salt, and a certificate that reports only “XRD conforms” has not shown the pattern. ## What adulteration looks like Common potassium chloride substitutions and the signals | Adulterant | What it does | Signal | Test | Sodium chloride | Cheap, white and salty; lowers potassium per gram | Potassium low; chloride high against it; sodium present | Potassium, chloride, sodium by ICP-OES, XRD | Potassium sulfate | White; adds potassium and sulfate, no chloride | Chloride low against potassium; sulfate present | Ion chromatography, XRD | Potassium carbonate | White; alkaline solution; no chloride | Chloride low; pH high; carbonate present | pH, titrimetric carbonate, XRD | Potassium citrate | White; adds potassium and organic anion | Chloride low; citrate reaction; pH high | Citrate test, ion chromatography, pH | Water | Surface moisture; caking and weight gain | Loss on drying above 0.5%; pouch weight gain | Loss on drying, weight gain Colour is the weakest signal on a white salt, and a small addition of sodium chloride changes nothing visible. The stronger signals are the potassium-to-chloride ratio, the sodium result, the pH and the diffraction pattern. A certificate that reports appearance and assay but not potassium and chloride has left the most likely substitution untested. ## How to write the identity into the specification - “Potassium chloride, CAS 7447-40-7, KCl, food or supplement grade.” - “Assay 99.0–101.0% by titration, with the basis stated.” - “Potassium 52.0–55.0% by flame photometry; report the method and the standard.” - “Chloride reported against the theoretical 47.55%.” - “Identification by potassium flame test and chloride precipitation.” - “Sodium reported where the source is sylvinite; no added sodium chloride.” - “XRD reference pattern and detection limit stated where the solid form is tested.” - “Particle size ≥95% through 80 mesh; heavy metals and microbiology as listed.” ## Five questions for the supplier - What are the potassium and chloride figures on this lot, by which methods, and on which basis? - What is the sodium result, and was it measured by flame photometry or ICP-OES? - Can you provide the titration record and the flame-photometry calibration, not only the assay percentage? - Is there an XRD pattern, and what reference and detection limit does it state? - If the lot is disputed, will you accept a joint re-test on the retained sample? Five answers make an identity file; one assay percentage does not. The product hub carries the catalog specification; the COA page shows where each figure sits on the certificate; the grades page compares the mesh and the granulation; the potassium citrate page shows a different anion with its own ratio; the quality page describes the retained-sample workflow. ### 01 What a tricalcium phosphate COA reports, line by line URL: https://nutrition.rainwoodbio.com/products/minerals/tricalcium-phosphate/coa/ Reviewed: 2026-11-20 A tricalcium phosphate certificate is read on four lines: calcium, phosphorus, the ratio between them, and loss on drying. The catalog range is 34.0–40.0% calcium and 18.0–20.0% phosphorus, each released against a named method. The certificate records one lot; the specification records the window it had to meet. In one lineA tricalcium phosphate certificate is read on two elements and their ratio: calcium and phosphorus, each with its method and its basis, because the ratio is what separates this salt from dicalcium phosphate. ## What the certificate has to carry Every line should name the analyte, the method and the gate the lot had to pass. A line that says only “conforms” cannot be checked against the specification or trended across lots. Identification is a pair of wet reactions: calcium gives a white oxalate precipitate, and phosphate gives a yellow phosphomolybdate precipitate in nitric acid. Both have to match before the elemental figures are read. Release parameters for tricalcium phosphate | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | Calcium and phosphate reactions | Conforms to the reference | Calcium | Complexometric titration with EDTA | 34.0–40.0% | Phosphorus | Titration after acid digestion | 18.0–20.0% | Loss on drying | Gravimetric, oven | ≤2.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh Calcium and phosphorus are separate determinations: calcium by EDTA, phosphorus by titration after acid digestion, with spectrophotometry as the usual cross-check. ## The oxide basis, the drying basis and the ratio Calcium is reported here as the element, not the oxide. The factor is 56.077 ÷ 40.078 = 1.399, so 38.0% calcium is 53.2% CaO. Phosphorus is reported as the element, not as P₂O₅: 141.944 ÷ 61.948 = 2.291, so 19.0% phosphorus is 43.5% P₂O₅. A technical data sheet that quotes 53% CaO and 43% P₂O₅ may describe the same powder as 38% Ca and 19% P; convert to one basis before comparing. Loss on drying is the second basis. The catalog limit is ≤2.0%, and a dried-basis result is larger than the as-received figure by the moisture fraction: 38.0% calcium as received with 1.5% loss on drying reads 38.58% dried. The basis belongs in the row, not in a footnote. The ratio is the third derived figure. Pure Ca₃(PO₄)₂ is 38.76% calcium and 19.97% phosphorus: 1.94 by mass, 1.50 by mole. The catalog windows are independent, so a lot at 34% calcium and 20% phosphorus passes both with a molar ratio near 1.31, which is not the TCP stoichiometry. Calculate the ratio and report it beside the two results. If a supplier also reports an assay calculated as Ca₃(PO₄)₂, ask which element produced it: 36.0% calcium calculates to 92.9%, while 19.0% phosphorus calculates to 95.1% on the same lot. An assay without its calculation is a third number, not a check on the first two. ## Release limit versus batch result A limit is the gate; a result is what the laboratory found. The two belong in separate columns, with the method beside them. If the result column repeats the range, the lot has not been reported. What the result column should contain | Parameter | Release limit | Result column | Calcium | 34.0–40.0% | A measured percentage, with the basis and the titration method | Phosphorus | 18.0–20.0% | A measured percentage, with the digestion and determination method | Ca : P molar ratio | No catalog gate; agree a window | The calculated figure, from results on one basis | Loss on drying | ≤2.0% | A measured percentage, with oven temperature and time | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot | Particle size | ≥95% through 80 mesh | The measured percentage through the sieve The ratio line is calculated, not measured. The catalog sets no ratio gate, and the elemental windows do not pin the stoichiometry on their own. Agree a ratio window when the phase matters, and report the calculated figure on every lot. ## What moves between batches Phosphate source, precipitation pH and calcination temperature move calcium and phosphorus together or apart. A change that raises calcium without raising phosphorus pushes the ratio toward apatite; a change that raises phosphorus without calcium pushes it toward dicalcium phosphate. Both can stay inside the catalog windows, which is why the ratio is read as a trend. Drying moves loss on drying. Milling moves the 80 mesh result and nothing else in the chemistry. Fluoride is the contaminant to watch when the phosphate comes from rock; it is not on the catalog panel, and a destination specification may set a limit. Colour is descriptive. White to off-white covers a range, and a grey or cream tone is not a purity figure. A lot visibly darker than the retained sample is worth a source question, not a rejection on appearance. ## When to order an outside test Order an outside test for a new source, a first shipment into a regulated market, a disputed ratio or an open phase question. The panel is not a copy of the certificate: calcium by EDTA with the indicator named, phosphorus by spectrophotometry with the digestion described, loss on drying with the oven temperature and time, ICP-MS for the metals, microbiology and the sieve result. Add X-ray diffraction when the phase is disputed, fluoride when the destination sets a limit, and acid-insoluble matter when a silica dilution is suspected. Ask for the detection limit beside every “not detected” entry; without it, the entry does not say how much could have been present. Keep the chain of custody. The sample tested should be the retained sample, the report should carry the lot code and the specification revision, and a contested result should go to a joint re-test on the retained powder. ## What to compare between suppliers Six lines show whether two offers describe the same powder: name and CAS number; calcium and phosphorus with methods and basis; loss on drying; the calculated ratio; heavy metals and microbiology; particle size, plus bulk density and flow if the powder will be compressed. Two offers that agree on calcium but differ on phosphorus are not the same salt, and an offer that reports calcium as CaO without saying so is not comparable until converted. The lot code on the certificate should match the pouch, the drum and the retained sample. The catalog figures sit on the tricalcium phosphate product page. The dicalcium phosphate page carries the neighbouring salt and its ratio; the methods index describes the assays; the quality page sets out the release workflow. ### 02 Tricalcium phosphate grades: powder, granulation and phase URL: https://nutrition.rainwoodbio.com/products/minerals/tricalcium-phosphate/grades/ Reviewed: 2026-11-20 Tricalcium phosphate is a family name, not a single grade. The catalog powder is 80 mesh with 34.0–40.0% calcium and 18.0–20.0% phosphorus; the solid behind those figures can be stoichiometric tricalcium phosphate or a calcium-deficient apatite, and granulation or a toothpaste-grade selection changes the physical powder without changing the formula. The grade decision is the ratio and the phase first, then the particle form. In one lineThe grade of tricalcium phosphate is set by its calcium-to-phosphorus ratio, its crystal phase and its particle size, not by the name on the drum. ## Why one name covers several powders The pure formula Ca₃(PO₄)₂ is 38.76% calcium and 19.97% phosphorus, a molar Ca : P ratio of 1.5. Food-grade material is often made by neutralising phosphoric acid with a calcium source, then drying or calcining the precipitate. The temperature and the calcium dose decide how much of the product is crystalline tricalcium phosphate and how much is a calcium-deficient apatitic phase with a ratio below the 1.67 of hydroxyapatite. The current EU additive definition for E 341(iii) describes the material as a variable mixture of calcium phosphates for this reason. The catalog window is wide enough to cover that variation: 34.0–40.0% calcium and 18.0–20.0% phosphorus. The purchase specification therefore has to say more than “tricalcium phosphate”; it has to name the ratio window and the physical grade. ## The grades side by side Tricalcium phosphate grades and the neighbouring salt | Grade | Calcium and phosphorus | Form | Usual fit | Catalog powder | 34.0–40.0% Ca; 18.0–20.0% P | Powder, ≥95% through 80 mesh | Capsules, tablets, powder blends | Granulated | Same chemistry as the base | Agglomerated, on request | Flow and dust control on a press | Toothpaste-grade selection | Same chemistry; physical lines agreed | Powder, on request | Oral-care abrasive and calcium source | Dicalcium phosphate | 29.0–30.0% Ca; 22.0–23.5% P | Anhydrous powder, 40 mesh | A different salt with a 1 : 1 molar ratio The first row is the catalog grade. The second and third are physical selections of the same chemistry, and each one needs its own specification lines: a granulated lot is judged on flow and bulk density, while a toothpaste selection is judged on particle distribution, whiteness and abrasivity as agreed with the buyer. The fourth row is not a grade of tricalcium phosphate at all; it is the neighbouring salt, and the dicalcium phosphate page covers it. Feed-grade and technical-grade material sit outside this specification: the contaminant panel, the documentation and the intended use are different, even when the calcium figure looks similar. ## Particle, flow and the acid reaction Tricalcium phosphate is practically insoluble in water and dissolves in dilute acid. In a dry blend or a capsule it is a dense, free-flowing powder; in water it is a suspension that settles, and no amount of mixing turns it into a clear solution. A formulator who needs clarity has to change the salt, not the mesh. The catalog fixes ≥95% through 80 mesh. Bulk density, flow and compressibility are not on the catalog list, and they decide whether the powder runs on a press. Granulation improves flow and reduces dust, but it also changes the fill weight for the same volume, so the tablet or capsule trial has to run on the granulated grade that will be bought. The acid reaction is the other physical difference. A finer powder presents more surface to the acid and reacts faster; a coarse or calcined powder reacts more slowly. In a tablet this affects disintegration and mouthfeel, and in a suspension it affects how much grit the consumer notices. ## Dose arithmetic and the dosage form Calcium is the figure the label declares, so the salt weight follows from the calcium content. At the theoretical 38.76% calcium, one gram of tricalcium phosphate carries about 388 mg of calcium and about 200 mg of phosphorus. A 600 mg calcium claim therefore needs about 1.55 g of the salt and brings about 309 mg of phosphorus with it. At 34.0% calcium the same claim needs about 1.76 g. The dosage form follows the mass. A 1.55 g fill is two or three large capsules, or one large tablet; the powder compacts well and is also used as a tablet diluent, so a tablet can carry tricalcium phosphate as the calcium source and as part of the filler at the same time. The calcium on the label is then the sum of both uses, and the diluent has to be counted as an active ingredient. A powder blend or a stick pack takes the 80 mesh powder and disperses it; the consumer sees a white suspension, not a clear drink. A toothpaste takes a selected grade where the particle size and the abrasivity are agreed with the buyer. In every format, the dose is a calcium decision and a phosphorus decision at once. ## What to write into the specification - “Tricalcium phosphate, CAS 7758-87-4, Ca₃(PO₄)₂; food grade.” - “Calcium 34.0–40.0% by complexometric titration; phosphorus 18.0–20.0% by titration after digestion.” - “Calculated Ca : P molar ratio reported; the agreed window stated.” - “Loss on drying ≤2.0%; particle size ≥95% through 80 mesh.” - “Heavy metals Pb ≤3, As ≤2, Cd ≤1, Hg ≤0.1 mg/kg; microbiology as listed.” - “Crystal phase and source declared; no dicalcium phosphate, calcium carbonate or silica added.” - “Granulated or toothpaste-grade selection named, with its own physical lines, if either is ordered.” The negative clause matters. The two elemental windows are wide and independent, so a blend of two calcium phosphates with different ratios can be built to pass both lines: a calcium-rich apatitic powder diluted with dicalcium phosphate is one example. The calculated ratio and the diffraction pattern are what expose the blend, so both belong in the specification. ## When another salt is the better choice If the product has to be a clear solution, tricalcium phosphate is the wrong salt: it is insoluble in water and dissolves only by reacting with acid. If the matrix is acidic and must stay clear, a soluble calcium salt such as calcium citrate or calcium lactate is the practical starting point. If the formula needs more calcium per gram, calcium carbonate carries about 40% and is the compact alternative when its acid reaction is acceptable. If the label names dicalcium phosphate, tricalcium phosphate is not a gram-for-gram substitute: the calcium rises, the phosphorus falls and the tablet mass changes. The tricalcium versus dicalcium page sets out that arithmetic and the label consequence. The product hub carries the catalog figures; the COA page shows how the two elemental lines are reported; the identity page covers the ratio and the diffraction check; the methods index describes the assays. ### 02.1 Tricalcium phosphate vs dicalcium phosphate: the Ca/P ratio and the label URL: https://nutrition.rainwoodbio.com/products/minerals/tricalcium-phosphate/grades/tricalcium-phosphate-vs-dicalcium-phosphate/ Reviewed: 2026-11-20 Tricalcium phosphate and dicalcium phosphate differ in the calcium-to-phosphorus ratio before anything else: 1.5 mol Ca per mol P against 1.0, and 1.94 against 1.29 by mass. That ratio sets how much calcium and phosphorus arrives per gram, how large the tablet or capsule has to be, and which name and E-number the label carries. The two are separate salts with separate specifications, not two grades of one product. In one lineThe molar calcium-to-phosphorus ratio is 1.5 for tricalcium phosphate and 1.0 for dicalcium phosphate, and that difference sets the elemental calcium, the phosphorus load and the name on the label. ## Two formulas, two ratios The formula sets the ratio; the supplier and the certificate only report it. One mole of Ca₃(PO₄)₂ carries three moles of calcium and two of phosphorus, which is 1.5 to one. One mole of CaHPO₄ carries one of each, which is 1.0 to one. Expressed by mass the figures are 1.94 and 1.29, because calcium and phosphorus have different atomic weights. The theoretical contents follow from the same arithmetic. Tricalcium phosphate is 38.76% calcium and 19.97% phosphorus; dicalcium phosphate is 29.46% calcium and 22.76% phosphorus. The catalog windows sit around those figures: 34.0–40.0% calcium and 18.0–20.0% phosphorus for tricalcium phosphate, and 29.0–30.0% calcium and 22.0–23.5% phosphorus for the anhydrous dicalcium salt. The ratio is the fastest check on a certificate. The tricalcium window is wide, and its independent lines allow a molar ratio anywhere from about 1.31 to about 1.72; a stoichiometric lot sits at 1.50. The dicalcium window is narrow, and its ratio stays at about 1.0. A certificate that reports 38% calcium and 15% phosphorus has put the calcium of one salt against the phosphorus of another. ## The salts behind the names Tricalcium phosphate is CAS 7758-87-4, Ca₃(PO₄)₂, molecular weight 310.18. Dicalcium phosphate is CAS 7757-93-9, CaHPO₄, molecular weight 136.06. The dicalcium salt also exists as a dihydrate, CAS 7789-77-7, which carries about 21% water and drops to 23.29% calcium and 18.00% phosphorus per gram; its molar ratio is still 1.0. A label that says only “dicalcium phosphate” leaves the hydrate, and therefore the calcium per gram, unspecified. The generic name “calcium phosphate” is ambiguous in both markets. In the EU the additive entries are split into E 341(i) monocalcium, E 341(ii) dicalcium and E 341(iii) tricalcium phosphate. In the US, 21 CFR 182.1217 lists calcium phosphate for the mono-, di- and tribasic forms as one GRAS family, so the ingredient statement still has to name the salt in the pack. ## What the ratio does to the dose Tricalcium and dicalcium phosphate per gram, and at a 600 mg calcium dose | Measure | Tricalcium phosphate | Dicalcium phosphate | Calcium per gram | About 388 mg | About 295 mg | Phosphorus per gram | About 200 mg | About 228 mg | Ca : P by mass | 1.94 | 1.29 | Ca : P by mole | 1.5 | 1.0 | Powder for 600 mg calcium | About 1.55 g | About 2.04 g | Phosphorus at that dose | About 309 mg | About 463 mg The calcium figure is what the label declares, so the compactness argument belongs to tricalcium phosphate. A 600 mg calcium claim needs about 1.55 g of it, against about 2.04 g of the dicalcium salt, which is roughly a quarter less powder for the same element. At 1.55 g the fill is two or three large capsules or one large tablet; at 2.04 g it is three or four capsules. The phosphorus moves the other way. For the same calcium claim, tricalcium phosphate brings about two-thirds of the phosphorus that dicalcium phosphate brings. If the formula already carries phosphorus from another source, or if the panel declares a phosphorus figure, that gap is a formulation constraint and not a rounding difference. ## What the label has to say Label consequences of the two salts | Label question | Tricalcium phosphate | Dicalcium phosphate | EU additive entry | E 341(iii) | E 341(ii) | US ingredient statement | Tricalcium phosphate | Dicalcium phosphate, hydrate stated | Salt for 600 mg calcium | About 1.55 g | About 2.04 g | Phosphorus at 600 mg calcium | About 309 mg: 44% EU NRV, 25% US DV | About 463 mg: 66% EU NRV, 37% US DV | Calcium declaration | Elemental calcium | Elemental calcium The panel declares elemental calcium, not the weight of the salt; the ingredient statement names the salt. Confusing the two is a large error, because the salt-to-element factor is about 2.58 for tricalcium phosphate and about 3.39 for the anhydrous dicalcium salt. The reference figures behind the percentages are 800 mg calcium and 700 mg phosphorus in the EU, and 1,300 mg calcium and 1,250 mg phosphorus in the US. The salt name is also the market entry. The EU additive specification for E 341(iii) describes a variable mixture of calcium phosphates, and the E 341(ii) entry is a separate specification; the two are not interchangeable on a label or in a customer's file. In the US, the GRAS family listing covers the forms, but the specific ingredient name is still what the reviewer and the consumer read. ## What changes when the salt changes A switch is not a gram-for-gram substitution. To keep a 600 mg calcium claim, replace about 2.04 g of dicalcium phosphate with about 1.55 g of tricalcium phosphate. The phosphorus falls from about 463 mg to about 309 mg, the tablet or capsule count falls, the acid solubility and the mouthfeel change, and the ingredient statement and the E-number change with them. Three documents reopen at the same time: the specification, because the calcium and phosphorus lines and the ratio window are different; the label, because the ingredient name and possibly the phosphorus declaration change; and the stability file, because the tablet hardness, the disintegration and the taste are properties of the new salt. A formula that has already been through a press trial should not be switched on a certificate alone. ## When to choose which Choose tricalcium phosphate when the claim needs more calcium per gram, when the phosphorus load has to be lower for the same calcium, or when the powder is also acting as a diluent in a compact tablet. Choose dicalcium phosphate when the formula wants a 1 : 1 calcium-to-phosphorus ratio, a direct-compression diluent, or a salt that reacts more readily in an acidic matrix, and when the label already names it. Choose neither for a clear solution: both are practically insoluble in water and dissolve only by reacting with acid. Calcium citrate or calcium lactate is the practical starting point for a clear drink, and calcium carbonate is the compact alternative when its acid reaction is acceptable. The tricalcium phosphate product page carries the catalog figures; the dicalcium phosphate page carries the neighbouring salt; the tricalcium grade page covers the phase and the particle form; the methods index describes the assays; the quality page sets out the release workflow. ### 03 Tricalcium phosphate stability: dry, insoluble and pack-led URL: https://nutrition.rainwoodbio.com/products/minerals/tricalcium-phosphate/stability/ Reviewed: 2026-11-20 Tricalcium phosphate is a dry, insoluble mineral salt with no oxidation or photochemical route to failure. Its practical limits are moisture pickup, caking and the behaviour of the powder in suspension. The pack and the storage condition set the retest period, not the certificate. In one lineTricalcium phosphate does not oxidise or photodegrade; moisture, caking and the pack decide how long the powder stays within specification. ## The powder: moisture, caking and colour As a dry solid, tricalcium phosphate is stable. It is a phosphate salt with no oxidisable organic fraction, so oxygen and light have no reaction to drive. The catalog limit of ≤2.0% loss on drying is a release gate and a storage marker: the powder picks up surface moisture from humid air, and an open pouch drifts toward the limit. As the water fraction rises, the as-received calcium and phosphorus percentages fall, even though the dry matter has not changed. Caking is the second dry risk. A drum that has sat under pressure in a humid store can form lumps that break down only slowly in a blender. The chemistry is unchanged, but the flow and the fill weight are not. Keep the sealed pack on a pallet rather than a concrete floor, and let a cold pack reach room temperature before opening so that condensation does not form on the powder. Light is not a driver for the assay. A clear container is a presentation issue rather than a photostability one, but an opaque pack is still the better default: it keeps the powder in the dark and it hides the colour shifts that invite a rejection. ## The suspension: insoluble in water, soluble in acid Tricalcium phosphate is practically insoluble in water, so the aqueous question is about a suspension, not a solution. In water the powder wets, settles and forms a white layer; a suspending agent and a controlled particle size keep it dispersed, and no amount of mixing makes it clear. A beverage that carries the powder settles in the bottle, and the dose becomes uneven unless the formulation is designed for it. In acid the salt dissolves. That is why an acidic matrix changes the physical state: the powder that was a suspension at neutral pH becomes soluble calcium and phosphate as the pH falls. This page makes no claim about absorption; the point is that the physical form in the finished product depends on the matrix, and the formulator has to test the matrix rather than the powder alone. An aqueous suspension is also a microbial environment. An unpreserved slurry held for several days is a different risk from a dry powder, and the microbiology specification applies to the powder, not to the slurry. Validate the hold time and the preservative in the finished product. ## What drives change during storage Factors that move tricalcium phosphate during storage | Factor | What it does | Control | Moisture | Raises loss on drying; lowers the as-received calcium and phosphorus | Sealed pouch; dry store; liner closed | Caking and pressure | Forms lumps; changes flow and fill weight | Pallet storage; avoid stacking; granulated grade | Acid pH | Dissolves the salt and changes the physical form | Validate the matrix; do not assume the powder behaviour | Microbial load in water | Grows in an unpreserved slurry | Preservative and hold-time validation | Heat | Dries the powder; drives off surface moisture | Ambient store; avoid hot bays | Light | No assay pathway; appearance only | Opaque pack for presentation These factors act together. A warm, humid store softens the lumps and raises the moisture at the same time, and a suspension in an acidic drink combines the acid reaction with the microbial question. The useful stability question is not whether the salt is stable, but which pack, which matrix and which time are being claimed. ## A stability protocol for the ingredient Set the protocol around the pack and the matrix. A sealed sample goes into 25 °C/60% relative humidity, 30 °C/65% relative humidity and 40 °C/75% relative humidity chambers, with time points that cover the claimed retest period plus a margin. At each point, measure calcium, phosphorus, the ratio, loss on drying, appearance, microbiology and the sieve result. A suspension arm is separate: prepare the slurry at the formula pH, hold it in the proposed container, and check settling, resuspendability and the micro count alongside the chemistry. A tablet arm adds hardness, disintegration and the loss on drying of the blend. Report the individual results and the pack, not a single pass line. Ask for the data file for the pack you will buy, not for the product family in general. Headspace, opening history and surface area differ between the pouch and the drum. ## The finished formula changes the answer A tablet can carry tricalcium phosphate as the calcium source and as a diluent at the same time. The relevant stability is then the tablet's: the loss on drying of the blend, the hardness and the disintegration, and the acid reaction in the mouth. A capsule is simpler, but the fill weight still depends on the flow of the powder, and a caked lot fills short. A powder blend or a stick pack fails at the seal and at the suspension. A pinhole in the foil lets moisture in, and a powder that settles hard in the glass is a consumer complaint even when the assay is intact. A toothpaste is a water-based paste, so the stability work belongs to the paste and the abrasive system, not to the drum. ## How the shelf life is set The retest period is assigned per pack and per storage condition, so there is no single number to publish for the material. The period on the specification is the one supported by the stability file, and it should be read with the pack and the condition beside it. At the end of the period, re-assay the retained sample before extending use. A bulk figure does not transfer to a repack, and a new pack needs its own data. The product hub lists the packs; the COA page covers release tests; the MOQ page covers pack and lead time; the quality page describes the release workflow. ### 04 Tricalcium phosphate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/tricalcium-phosphate/moq/ Reviewed: 2026-11-20 The minimum order for tricalcium phosphate is 1 kg, packed in a foil pouch; a 25 kg fiber drum is the bulk unit, and the catalog powder ships in 1–7 days. A useful quotation names the grade, the ratio window, the pack, the destination and the documents, because a dense mineral powder is bought on its specification and its freight as much as on its weight. In one lineThe 1 kg pouch is the minimum order because a lot has to be sampled, tested and traced before it is worth buying. ## Why the minimum is 1 kg One kilogram is enough to run a bench trial, retain a sample and send a portion to an outside laboratory. It is also a single lot with a single certificate, which is the property that matters: a trial result is only useful if the powder behind it can be traced to the pack. Below 1 kg, the material is split from a larger lot, and the split has its own handling record but not its own manufacturing lot. The 25 kg drum is the production unit. It lowers the handling per kilogram, but it also means a longer storage period and a larger commitment before the formula is fixed. The minimum is a pack size, not a discount threshold. ## Packs and formats Standard tricalcium phosphate packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Physical grade; particle profile changes | Toothpaste-grade selection | On request | Oral-care use | Physical lines agreed with the buyer Tricalcium phosphate is a dense powder, so a 25 kg drum is a compact pallet load and the freight is driven by the pallet and the destination rather than by the volume. The 1 kg pouch travels as a parcel. The catalog grade is ≥95% through 80 mesh; a granulated lot or a toothpaste-grade selection is a different physical specification, and the mill setting and the lead time change with it. ## Lead time and dispatch The catalog powder is quoted at 1–7 days from confirmation. That window covers picking, packing and document preparation; it does not cover the transit, the customs clearance or the customer's own quality release. A custom granulation or a toothpaste-grade selection adds a production step and should be quoted with its own date. Ask for the dispatch date, not only the range. The pouch and the drum leave on different routes, and the Incoterm decides who books the freight and who clears entry. The certificate, the packing list and the rest of the lot documents belong in the same shipment as the pack. ## What a quotation needs Six items make a quotation comparable: - Salt and grade. Tricalcium phosphate, CAS 7758-87-4, 80 mesh powder or a named physical grade. - Two elements and the ratio. Calcium 34.0–40.0%, phosphorus 18.0–20.0%, and the agreed molar window. - Quantity and pack. 1 kg pouch, 25 kg drum, or the granulated or toothpaste-grade selection. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, specification, SDS, and a fluoride statement where the destination requires one. - Intended use and market. Supplement, food or oral care, and the market where it will be sold. A quotation that gives only a calcium figure is not a quotation for a specification. The ratio window and the grade belong in the offer, because two lots inside the calcium and phosphorus windows can still differ in phase and in behaviour on a press. ## The sample is a lot, not a demonstration Order the 1 kg pouch as the qualification unit. Test calcium, phosphorus, the calculated ratio, loss on drying, microbiology and the mesh result, keep a retained portion, and record the lot code against the trial. The pack is small enough to store and large enough to repeat the test if a result is questioned. A bench split below 1 kg is a repack. Ask for the parent lot code and keep it with the trial record, because the powder on the bench and the powder in the production drum may come from different manufacturing lots even when both meet the specification. ## Terms to settle before the first order The quality agreement should carry the pack, the dispatch window, the specification revision, a COA per lot, the retained sample, the retest period and the change-control route. Tricalcium phosphate has one extra term: the ratio window. Write it into the agreement, because the calcium and phosphorus limits alone do not fix the stoichiometry. If a lot is disputed, the retained sample and a joint test are the route, not a photograph of the drum. Agree the laboratory and who pays for it before the first production order, and make sure the return decision rests on the named method rather than on appearance. The product hub carries the catalog figures; the COA page lists the release tests; the grade page covers the physical forms; the methods index describes the assays; the quality page describes the release file. ### 05 The regulatory file for tricalcium phosphate URL: https://nutrition.rainwoodbio.com/products/minerals/tricalcium-phosphate/compliance/ Reviewed: 2026-11-20 Tricalcium phosphate is used as a calcium and phosphate source in food and supplements, and the file has to name the salt, the ratio and the route. The catalog specification and the batch COA describe the material; the destination rules and the finished-product label decide whether it can be sold. The buyer's regulatory team confirms that route. In one lineThe file has to show which calcium phosphate is in the pack, at what calcium and phosphorus content, and which market route the finished product takes. ## What the file contains The file holds four things: the specification version for tricalcium phosphate, the certificate for the lot, the destination rules and label requirements, and the change record for source, phase and pack. The certificate, the technical data sheet and the safety data sheet each answer a different question, and none of them states the market route. That is recorded separately by the buyer's team. Keep a versioned document list at the front. The specification revision on the quotation, the certificate and the label should be the same revision; a label written against an older calcium window is a recall risk, not a paperwork detail. ## European Union In the EU, the food-additive route runs through E 341(iii), one of the three calcium phosphate entries in Regulation (EC) No 1333/2008: E 341(i) monocalcium, E 341(ii) dicalcium and E 341(iii) tricalcium. The additive specification sits in Regulation (EU) No 231/2012, as amended. That specification defines E 341(iii) as a variable mixture of calcium phosphates obtained by neutralising phosphoric acid with calcium hydroxide or calcium carbonate. The permitted food categories and maximum levels are in Annex II to Regulation 1333/2008, and the buyer's team checks the category for the finished product. Food supplements add Directive 2002/46/EC and its permitted-source list; labelling follows Regulation (EU) No 1169/2011, including the calcium and phosphorus entries in the nutrition declaration and their reference intakes; contaminants follow Regulation (EU) 2023/915. This is as of this review, and the current consolidated texts govern. For the United Kingdom, Great Britain uses assimilated law and Northern Ireland follows the EU framework. The delivery address decides which file applies, and the buyer records that decision with the order. ## United States In the United States, calcium phosphate is listed as GRAS for the mono-, di- and tribasic forms at 21 CFR 182.1217, for use in accordance with good manufacturing practice. That listing covers the family, not a specific ratio, so the ingredient statement still has to name tricalcium phosphate and the specification still has to fix the calcium and phosphorus figures. A supplement is also a dietary supplement under DSHEA, made under the cGMP rule at 21 CFR 111, with a Supplement Facts panel under 21 CFR 101.36. Calcium is a mandatory panel nutrient; phosphorus is not in the mandatory list, so the phosphorus that arrives with the salt may not appear unless the label declares it. State requirements can add a warning or a limit. ## Contaminants and limits The catalog limits are release gates for the powder. The finished-product limit is a calculation: the daily dose of the powder divided into the daily intake of the supplement. A lot that meets the powder gate can still exceed a finished-product limit at a high daily dose. Contaminant limits to carry into the finished-product file | Parameter | Catalog limit | What the file should show | Lead (Pb) | ≤3 mg/kg | Lot result, method and the finished-product calculation | Arsenic (As) | ≤2 mg/kg | Lot result and the destination limit, where one is set | Cadmium (Cd) | ≤1 mg/kg | Lot result and any category exception that applies | Mercury (Hg) | ≤0.1 mg/kg | Lot result and method | Fluoride | Not in the catalog panel | The destination limit and the method, when one applies | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g | The count and the absence statement for the lot Fluoride is the line most often missing from a calcium phosphate file and most often asked for by a buyer who knows the phosphate source. Ask for it when the destination sets a limit, and record the method and the result with the rest of the panel. ## Claims and the label name The claims file is separate from the specification. In the EU, calcium and phosphorus have authorised claims under Regulation (EC) No 1924/2006, each with a condition of use, usually that the product is a source of the nutrient. The brand's reviewer selects the wording and checks the condition against the daily dose. In the US, a structure/function statement needs substantiation and the DSHEA disclaimer. No disease claim is open in either market, and this page makes no health claim. On the label, the ingredient name should be the specific salt, “tricalcium phosphate”, not “calcium phosphate” alone, because the generic name leaves the reader unable to tell which ratio was used. ## Documents for the file The file needs the COA with calcium and phosphorus on a stated basis, the calculated ratio, loss on drying, the metal panel and the microbiology; the specification with CAS 7758-87-4, the grade and the ratio window; the TDS and the SDS; allergen and GMO statements; the origin and the manufacturing source; the particle-size and pack declaration; and the change-control record for source, phase and pack. Add the fluoride statement when the destination requires it, and the additive or nutrient route the buyer relies on. An allergen statement for a mineral salt is short, but the file should still carry it rather than leave the question open. ## Checklist before the first order - Specification version, CAS number and grade are named. - COA, TDS, SDS, allergen, GMO, origin and particle-size documents are on file. - Calcium and phosphorus are reported on the same basis, with the ratio calculated. - The contaminant results are converted to the finished-product dose. - The label name, the additive entry and the claims have been reviewed for the destination. - Source, phase and pack are under change control. The product hub carries the catalog figures; the COA page shows where each figure sits; the identity page covers the ratio and the phase; the methods index describes the assays; the quality page describes the release file. ### 06 How to prove a lot is tricalcium phosphate URL: https://nutrition.rainwoodbio.com/products/minerals/tricalcium-phosphate/identity/ Reviewed: 2026-11-20 A lot is tricalcium phosphate when the document, the calcium result, the phosphorus result and the calculated molar ratio agree, and the diffraction pattern matches the phase named. The ratio is the discriminator: pure tricalcium phosphate is 1.5 mol Ca per mol P, dicalcium phosphate is 1.0, and hydroxyapatite is 1.67. Calcium alone cannot tell them apart. In one lineIdentity is the calcium figure, the phosphorus figure and their molar ratio agreeing, with a solid-state pattern that matches the phase named on the certificate. ## Five layers, five questions A certificate can carry the right name and still leave the powder unproven. Each layer below asks a different question and needs its own evidence; an answer to the first alone describes the paperwork, not the material. Layers of tricalcium phosphate identity | Layer | Question | Test | What it proves | Document | Are the name, CAS and grade named? | Specification and label | Paperwork only | Calcium | Is the calcium figure right? | Complexometric titration with EDTA | The element, not the salt | Phosphorus | Is the anion phosphate? | Titration or spectrophotometry after digestion | The phosphate anion | Ratio | Is the Ca : P balance that of tricalcium phosphate? | Calculation from the two results | Which calcium phosphate | Solid state | Which phase is present? | X-ray diffraction | Tricalcium phosphate against apatite or a second phase Acid-insoluble matter is a useful negative check beside these: it measures what the acid did not dissolve, so a high residue caps how much of the powder can be silica or a silicate. It does not identify the salt. ## The calcium-to-phosphorus ratio Pure Ca₃(PO₄)₂ is 38.76% calcium and 19.97% phosphorus. The mass ratio is 1.94; the molar ratio is (38.76 ÷ 40.078) ÷ (19.97 ÷ 30.974) = 1.50. The conversion between the two is constant: multiply the mass ratio by 0.773 to get the molar ratio. The calculation is portable because it needs only the two results the certificate already carries. A lot at 38.0% calcium and 19.0% phosphorus has a molar ratio of 1.55; a lot at 36.0% calcium and 19.0% phosphorus has 1.46; a lot at 35.0% calcium and 19.5% phosphorus has 1.39. The last lot passes both catalog windows and is still not stoichiometric tricalcium phosphate. The catalog windows are independent, so they allow molar ratios from about 1.31, at 34% calcium and 20% phosphorus, to about 1.72, at 40% calcium and 18% phosphorus. A stoichiometric product sits at 1.50; an apatitic product sits higher, toward the 1.67 of hydroxyapatite. The agreed ratio window is therefore a real specification line, not a derived curiosity. Neighbouring salts sit outside the window. Dicalcium phosphate is 1.0; monocalcium phosphate is 0.5; hydroxyapatite is 1.67. Calcium carbonate and calcium sulfate carry no phosphorus at all, so their phosphorus result is near zero and the ratio is undefined. Each of those is visible in the pair of figures, and none is visible in the calcium figure alone. ## X-ray diffraction and the solid phase X-ray diffraction asks which solid is present. β-tricalcium phosphate, the whitlockite-type phase, gives one pattern; α-tricalcium phosphate, the high-temperature phase, gives another; hydroxyapatite gives a third. A commercial lot can be a mixture, and a broad or apatitic pattern is a phase result rather than a purity failure. The scan separates a physical blend from a single phase, and it shows a dicalcium phosphate or calcium carbonate line when either is present above the detection limit. It cannot quantify an amorphous fraction, and it cannot see a substitution that leaves the lattice unchanged. Before accepting a “match” statement, ask for the reference pattern, the scan range, the sample preparation and the detection limit. For a disputed lot, diffraction plus calcium plus phosphorus plus the ratio is stronger than any one of them. Diffraction is not a routine release test for this product, and a certificate that says only “XRD conforms” without the pattern has added little. ## What substitution looks like Substitutions and the signals that expose them | Substitute | What it does | Signal | Test | Dicalcium phosphate | Raises phosphorus; lowers the ratio toward 1.0 | Phosphorus above 20%; calcium below 34% | Ratio, XRD | Calcium carbonate | Raises calcium; adds no phosphorus | Effervescence in acid; phosphorus near zero | Acid reaction, phosphorus, XRD | Calcium sulfate | Matches some calcium figures; adds no phosphorus | Phosphorus near zero; sulfate test positive | Phosphorus, sulfate test | Hydroxyapatite | Raises the ratio toward 1.67 | Calcium high against phosphorus | Ratio, XRD | Silica or silicate | Dilutes both figures; adds residue | Acid-insoluble matter high | Acid-insoluble matter, XRD | Feed-grade material | Same chemistry, different contaminant panel | Fluoride or metals outside the food limit | Fluoride, ICP-MS, documents Colour is the weakest signal. All of these can be white, and the strongest evidence is the phosphorus figure, the ratio and the acid-insoluble residue. A certificate that reports calcium and appearance but not phosphorus has not tested the substitution that matters most. ## Identity clauses for the specification - “Tricalcium phosphate, CAS 7758-87-4, Ca₃(PO₄)₂; grade and phase declared.” - “Calcium 34.0–40.0% and phosphorus 18.0–20.0%, both on the same stated basis.” - “Calculated Ca : P molar ratio reported; agreed window stated.” - “Loss on drying ≤2.0%; acid-insoluble matter reported.” - “X-ray diffraction on request, with the reference pattern and the detection limit.” - “No dicalcium phosphate, calcium carbonate, calcium sulfate or silica added.” ## Five questions for the supplier - What are the calcium and phosphorus results, and were both measured on the same lot and basis? - What is the calculated molar Ca : P ratio, and what window does the specification set? - Which phase does X-ray diffraction show, and against which reference pattern? - What is the acid-insoluble matter, and what does it rule out? - What is the fluoride figure, and will you re-test the retained sample jointly if a result is disputed? Five direct answers amount to an identity file; a calcium percentage does not. The product hub carries the catalog figures; the COA page shows where each figure sits; the grade page covers the phase and the particle form; the tricalcium versus dicalcium page takes the ratio arithmetic further; the methods index describes the tests. ### 01 What the COA for vitamin D2 oil actually contains URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-d2-oil/coa/ Reviewed: 2026-11-20 The certificate for a vitamin D2 oil lot reports appearance, identification by HPLC and ultraviolet spectrum, potency in IU per gram, peroxide value, the heavy-metal panel and microbiology, and it should name the carrier oil. The figures below are the catalog specification for the 1.0–1.1 MIU/g oil; the batch certificate is the document that speaks for the bottle in hand. In one lineAn oil certificate has to put IU per gram, peroxide value and HPLC/UV identity on the same page, because a potency figure alone cannot separate fresh oil from oxidized oil. ## The certificate as a test report A certificate is auditable when each row carries the measurement, the method and the limit it was judged against. The identity line and the potency line answer different questions: HPLC retention and the UV spectrum say the peak is ergocalciferol, while the IU figure says how much of it sits in the carrier. A certificate that prints only the potency has measured the second question and skipped the first. For an oil, the carrier and the antioxidant belong on the same page as the vitamin. They are most of the mass and they decide how the oil behaves in a softgel or a blend; if the carrier is not named, the certificate does not fully describe the bottle. Identity, potency and contaminants · vitamin D2 oil | Parameter | Method | Release limit | Appearance | Visual | Clear, pale yellow oil | Identification | HPLC retention and UV spectrum | Conforms to an ergocalciferol reference | Potency | HPLC with UV detection | 1.0–1.1 MIU/g | Peroxide value | Iodometric titration | ≤10.0 meq O₂/kg | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Carrier | Specification and batch record | Named on the specification and the certificate ## IU per gram, not a percentage Oil potency is quoted in IU per gram, not as a percentage. The IU is fixed at 40 per microgram, so a 1.0 MIU/g oil contains 25 grams of ergocalciferol in a kilogram, which is 2.5% by mass; the 1.1 MIU/g top of the range works out at 27.5 g/kg, or 2.75%. Those conversions are fixed by the unit, not by the supplier. The oil is measured as received. There is no anhydrous basis and no loss-on-drying line, because the carrier is a liquid and the potency is already an as-is figure. The certificate should show how the HPLC result in micrograms per gram became an IU figure, name the reference standard and state the detection wavelength. A potency number without that note is harder to audit, and a number copied from a marketing sheet is not a result. The reference standard matters. Ergocalciferol and cholecalciferol both absorb ultraviolet light near 265 nm and both use the same 40 IU per microgram convention, so an assay reported against a generic “vitamin D” standard does not establish which molecule was measured. The certificate should name an ergocalciferol standard and say whether a cholecalciferol screen was run. ## Release limit versus batch result The limit marks where acceptance stops; the result records what this lot actually contained. Keep them in separate columns and put the method beside both. A result column filled with the specification range has copied the gate instead of reporting a measurement. What the result column should contain | Parameter | Release limit | Result column | Potency | 1.0–1.1 MIU/g | A measured IU/g figure with the conversion and the standard | Peroxide value | ≤10.0 meq O₂/kg | A measured figure in meq O₂/kg | Identification | Conforms to an ergocalciferol reference | The retention time and the spectrum statement | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot | Appearance | Clear, pale yellow oil | A description of the lot as received Peroxide value is the line that tends to fail first. A lot can sit inside the potency range and still be unusable if the carrier has begun to oxidize. Peroxide value is a quality limit rather than a regulatory one, and it belongs beside the potency rather than in a footnote. ## What moves between batches Four things move between oil lots: the potency of the concentrate, the quality of the carrier, the antioxidant package and the colour of the oil. Potency moves with weighing, dilution and the standard. Peroxide value moves with the age of the carrier, the antioxidant and the headspace in the bottle. Colour moves with the carrier lot and with exposure. The catalog window is 1.0–1.1 MIU/g. Two compliant lots can sit at 1.02 and 1.09 MIU/g; if the formula assumes the lower figure, the second lot supplies roughly a tenth more vitamin per unit. Record the potency actually used in the weigh-up rather than rejecting a lot that is inside the agreed range. One result near a limit carries less information than a trend across lots. Peroxide value climbing, potency drifting down or colour darkening over several deliveries points to a change in carrier supply, antioxidant or storage. The lot code on the certificate should match the bottle, the carton and the retained sample. ## When to order an outside test Independent testing is worth its cost for a new source, a first shipment into a regulated market, a disputed potency result, a peroxide value near the ceiling or a label that names D2 while the certificate stays vague. The useful panel is HPLC with a diode-array detector against an ergocalciferol standard, the ultraviolet spectrum, peroxide value, ICP-MS for the metal panel and microbiology. Add a cholecalciferol screen when the form is in question, a fatty-acid profile by GC when the carrier is disputed, and residual solvents if the manufacturing route uses them. Ask the laboratory to state its detection limit for each screen. A “not detected” line without a limit describes the reach of the method, not the sample. Chain of custody belongs in the same conversation. The material sent to the laboratory should be the material in the retain room, and the report should name the lot. In a dispute, give the referee those three items and ask for tests that discriminate between forms, not a second run of the same potency method. ## What to compare between suppliers Compare six fields: form and CAS number; IU/g with the method and the reference standard; carrier oil; antioxidant package; peroxide value; pack size and lot code. Two offers that agree on potency but differ on the carrier or the antioxidant are not the same oil, even when the headline number matches. Traceability is the second layer: the certificate should identify the manufacturing site, the carrier batch and the pack that was filled. The catalog values are listed on the product hub; the solid form is on the vitamin D2 page; the oxidation route is on the stability page; the tests are explained in the methods library; release is described on the quality page. ### 02 Vitamin D2 oil grades: potency, carrier and dosage form URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-d2-oil/grades/ Reviewed: 2026-11-20 Vitamin D2 oil is supplied at 1.0–1.1 MIU/g in a food-grade carrier oil, packed in 1 kg and 5 kg amber bottles. That is one grade in the catalog, not a range of purities: the carrier and the potency are the grade. The crystalline powder and the powder-on-carrier format are separate specifications with their own assay, pack and stability file. In one lineThe grade is the carrier plus the IU per gram: change either one and the fill weight, the label and the stability file move with it. ## Why the oil grade exists Ergocalciferol is a crystalline sterol that dissolves in oil. The oil grade exists because a 1,000 IU dose is only 25 µg of the vitamin. At 1.0 MIU/g, one gram of oil carries one million IU, so 1,000 IU is one milligram of oil. That is small enough to weigh but far too small to fill a softgel on its own; the concentrate is diluted into the rest of the fill. The powder side works at a different scale. Crystalline ergocalciferol is specified at 97.0–103.0% and is about 40 MIU/g, so it is bought to make a premix or a trituration rather than to fill a capsule directly. A powder on a solid carrier is diluted to an agreed IU/g and declared as its own product. Three concentrations, three carriers, three specifications. ## The formats side by side Vitamin D2 formats and what one gram carries | Format | Potency | Carrier | Typical use | Oil, this product | 1.0–1.1 MIU/g (1,000–1,100 IU/mg) | Food-grade oil, named on the specification | Softgels, oil blends | Crystalline powder | 97.0–103.0% (about 38.8–41.2 MIU/g) | None | Premix, capsules and tablets after dilution | Powder on carrier | Agreed IU/g | Solid carrier, declared | Dry blends, stick packs The oil is roughly forty times less potent per gram than the pure crystal. That does not make it a lower grade. It makes the weighed amount larger, so the balance and the mixing step carry less of the total error. The crystal is the concentrate from which the other formats are built. ## What the oil is like to handle Appearance is a clear, pale yellow liquid. The oil does not dissolve in water; it mixes with fats and organic solvents and with other triglyceride oils, which is why it suits an oil blend or a softgel fill. Without an emulsifier it will not disperse in water, so a drink mix is not its natural home. Thickness depends on the carrier and on temperature. Chilling makes the oil viscous and sometimes cloudy; warm it gently and stir before weighing, and read cloudiness as a handling effect rather than a potency result. Amber glass blocks light but does not measure, and the air space above the oil feeds oxidation after opening. The crystalline powder has the opposite profile: white, free-flowing and specified at 40 mesh, with a melting range of 115–118 °C and a loss on drying limit of ≤0.5%. It is light-sensitive, so bench work belongs under subdued light and the remainder goes back into the foil pouch. The oil keeps the vitamin away from moisture but exposes it to dissolved oxygen and to the carrier's own peroxides. ## Dose arithmetic and the label The conversion is fixed: one microgram of vitamin D2 is 40 IU. With the 1.0 MIU/g oil, 400 IU is 10 µg and 0.4 mg of oil; 1,000 IU is 25 µg and 1 mg; 5,000 IU is 125 µg and 5 mg; 10,000 IU is 250 µg and 10 mg. The same doses in 99.0% crystalline ergocalciferol weigh about 0.010, 0.025, 0.126 and 0.253 mg. The same label dose in oil and in crystalline ergocalciferol | Label dose | Micrograms | Oil at 1.0 MIU/g | Crystal at 99.0% | 400 IU | 10 µg | 0.4 mg | 0.010 mg | 1,000 IU | 25 µg | 1 mg | 0.025 mg | 5,000 IU | 125 µg | 5 mg | 0.126 mg | 10,000 IU | 250 µg | 10 mg | 0.253 mg A softgel holds far more than the milligram of concentrate, so the balance of the fill is carrier oil selected for the shell and the process. The label declares vitamin activity, not the weight of concentrate. Keep the concentrate's IU/g in the batch record so release can check the weigh-up. Each milligram of a 1.1 MIU/g lot contains 1,100 IU. If the formula is built on 1.0 MIU/g, a unit made from that lot is 10% above the calculated activity unless the weigh-up is changed. Decide whether batches are weighed on the certificate result or on a fixed 1.0 MIU/g assumption, and write the rule into the specification. In the EU and the UK the label declares vitamin D in micrograms per daily portion and as a percentage of the 5 µg reference intake. In the US the Supplement Facts panel uses micrograms and the 20 µg Daily Value, with the IU optional in parentheses. The ingredient list names ergocalciferol; “vitamin D” alone does not say which form is in the bottle. ## What to write into the specification - “Ergocalciferol oil, CAS 50-14-6, C28H44O, 1.0–1.1 MIU/g by HPLC.” - “Carrier oil named; antioxidant package named where used; peroxide value ≤10.0 meq O₂/kg.” - “Identification by HPLC retention and UV spectrum against an ergocalciferol standard; state the wavelength.” - “Appearance clear, pale yellow oil; heavy metals and microbiology as listed.” - “Pack 1 kg or 5 kg amber bottle; storage condition and retest period stated.” - “Destination market and label units agreed before the first order.” ## When the oil is the wrong choice The oil is the wrong choice for a tablet, a hard capsule, a stick pack or a dry blend, where a liquid fill would need a carrier and an extra process step. It is also the wrong choice when the label declares a powder or when the plant has no way to weigh and dilute a milligram-scale concentrate accurately. The crystal is the wrong choice when the formula needs a direct oil fill, and a powder on carrier is the wrong choice when the label declares the oil. A switch in either direction is a new specification, a new carrier declaration and a new stability file, not a unit conversion. The catalog values are on the product hub; the level-four comparison takes the oil and powder forms further; the solid grade is on the vitamin D2 page; the oxidation route is on the stability page; the market file is on the compliance page; the assays are in the methods library; release is described on the quality page. ### 02.1 Vitamin D2 oil vs powder: carrier, overage and the label URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-d2-oil/grades/vitamin-d2-oil-vs-powder/ Reviewed: 2026-11-20 Vitamin D2 oil at 1.0–1.1 MIU/g and the powder forms carry the same ergocalciferol at very different concentrations. The oil is a liquid concentrate in a food-grade carrier; the catalog powder is 97.0–103.0% crystalline ergocalciferol, and a powder on carrier is diluted to an agreed IU/g. The switch changes the mass per dose, the carrier declaration, the overage calculation and the label. In one lineThe oil and the powder carry the same ergocalciferol, but the carrier changes the fill weight, the overage arithmetic and the words on the label. ## What the carrier is Both forms are mostly carrier, but the carrier is not the same material. At 1.0 MIU/g the ergocalciferol is about 2.5% of the oil, so the other 97.5% is the carrier oil and, where used, the antioxidant. The crystalline powder has no carrier at all: it is the concentrate. A powder on carrier is mostly solid carrier, with the vitamin diluted to an agreed potency. The oil carrier is a food-grade lipid named on the specification. It is the fill itself in a softgel or an oil blend, and it has to be miscible with the other oils in the formula. The powder carrier is a solid such as a starch, gum or maltodextrin, declared on its own specification; it makes the vitamin free-flowing and water-dispersible, which is what a tablet, a hard capsule or a stick pack needs. Allergens travel with the carrier rather than the vitamin. A soy-derived oil carrier brings its own declaration; a starch- or gum-based powder does not inherit that one, though it may carry a different source statement. Confirm the carrier for the lot and match the ingredient list to it. ## Two concentrations, two masses The IU convention is shared: one microgram of either form is 40 IU. The oil at 1.0 MIU/g carries 1,000 IU per milligram. The crystalline powder at 97.0–103.0% carries about 38.8–41.2 MIU/g, or roughly 40,000 IU per milligram. A carrier powder is diluted to the IU/g agreed for the order, so its mass per dose depends on that agreement. The same dose in oil and in the powder forms | Form | Potency | 1,000 IU weighs | Carrier | Oil, this product | 1.0–1.1 MIU/g | About 1 mg | Food-grade oil, named | Crystalline powder | 97.0–103.0% (about 40 MIU/g) | About 0.025 mg | None | Powder on carrier | Agreed IU/g | Depends on the agreed potency | Solid carrier, declared The oil is roughly forty times less potent per gram than the pure crystal and about ten times more potent than a 100,000 IU/g carrier powder. The smaller the weighed mass, the more the balance, the dilution step and the mixing time contribute to the error. The oil is a practical concentrate because a milligram can be weighed and dispersed; the crystal is a premix material, not a capsule fill. ## Where the overage comes from The 1.0–1.1 MIU/g window is a release tolerance, not an overage. A formulator adds extra vitamin so that the label claim survives to the end of shelf life, and the size of that addition comes from the stability curve for the chosen pack. The two numbers are often confused because both are expressed as a percentage. The tolerance and the overage can compound. Suppose the master formula assumes 1.0 MIU/g and the released lot assays at 1.1; the batch already contains a tenth more than the calculation. Add another tenth as overage and release sits about 21% above target. Put release potency, label claim and stability loss into one calculation. Oil and powder do not fail the same way. In oil, oxidation shows up first in the peroxide value and potency follows; in powder, light exposure and moisture pickup lead, with loss on drying as the early indicator. An overage derived from one stability file cannot be transplanted to the other, and no overage compensates for a pack that admits light or oxygen. ## What the label has to declare The label names the vitamin, not the concentrate. In the EU and the UK, the ingredient is declared as vitamin D2 or ergocalciferol, with the amount per daily portion in micrograms and as a percentage of the 5 µg reference intake. In the US, the Supplement Facts panel declares vitamin D2 (ergocalciferol) in micrograms and as a percentage of the 20 µg Daily Value; the IU may follow in parentheses. The carrier and the antioxidant appear in the ingredients list in both markets. Label elements for the two forms | Element | EU and UK | US | Nutrient name | Vitamin D2 or ergocalciferol | Vitamin D2 (ergocalciferol) | Amount and reference | µg per daily portion; % of 5 µg NRV | µg per serving; % of 20 µg Daily Value | Carrier | In the ingredients list; allergen statement where required | In the ingredients list; allergen statement where required | Dispersion wording | Only if the form supports it | Only if the form supports it The oil does not mix with water on its own. A water-dispersible claim requires the powder, or an emulsion backed by its own stability work. Labels do not transfer between forms just because the IU per unit matches. ## Handling follows the form Packaging follows the failure route. Oil needs an amber bottle against light and oxygen; powder needs a foil pouch against moisture and light. A softgel gives the fill an opaque shell and a low-oxygen interior, while a stick pack gives the powder a foil barrier and a sealed seam. Changing pack means generating new stability data. At the bench, the oil is warmed gently and mixed before weighing, and the bottle is closed between uses. The powder is kept dry and resealed, and the pouch is not left open in a humid room. Both are sensitive to heat, and neither belongs in a hot loading bay. The oil stability page carries the full protocol. ## When to choose the oil and when the powder Pick the oil for softgels, oil blends and lipid fills where a liquid carrier is wanted and the concentrate can be diluted into the batch. Pick the powder for tablets, hard capsules, stick packs and dry blends where a free-flowing solid is needed. Pick the crystal when the plant makes its own premix. A switch is a new specification, label and stability file, not a conversion factor. A switch is a new specification, a new label and a new stability file, not a unit conversion. The oil product page carries the oil specification; the vitamin D2 page carries the crystalline powder; the grades page places the forms in the catalog range; the compliance page covers the market file; the methods index explains the assays; release is described on the quality page. ### 03 Vitamin D2 oil stability: oxidation, light and the bottle URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-d2-oil/stability/ Reviewed: 2026-11-20 Vitamin D2 oil is a fat before it is a vitamin, and it spoils like one. Oxygen, light and heat attack the carrier and the dissolved ergocalciferol; the peroxide value rises before the IU figure falls. The amber bottle, the cap liner and the storage condition are part of the specification, and the shelf life is assigned from data for the exact pack. In one lineA vitamin D2 oil is a fat before it is a vitamin: keep oxygen and light away from the carrier, and the declared IU figure has a chance to hold. ## The bulk oil: headspace, water and the cap The oil is hydrophobic, so moisture is not the release line that loss on drying is for the crystalline powder. The water-related risks are different: condensation on a cold bottle, a damp cap and a humid store that attacks the label and the carton. Store the bottle dry, sealed and upright, and let it reach room temperature before opening it after cold transport. Amber glass is a light barrier, not a hermetic seal. The cap liner is the seal, and a bottle that has been opened and closed at the bench holds more oxygen in its headspace than one that left the fill line sealed. A one-kilogram bottle used over several weeks is better worked from a smaller amber aliquot than opened every day, provided the aliquot keeps the lot identity. Humidity still belongs in the record. Condensation on the neck can enter the oil when the cap comes off, and a damp carton is a sign that the storage condition has not held. The condition printed on the specification is an instruction, not a formality. ## The oil is already a solution Ergocalciferol is dissolved in the carrier, so the oil is a solution rather than a suspension. The concentration is fixed at 1.0–1.1 MIU/g, and dilution in the finished fill changes the volume, the surface area and the oxygen available per unit of vitamin rather than the chemistry. In a softgel fill the oil may be blended with other triglycerides and with an antioxidant. The blend has to be miscible, and the antioxidant has to be chosen for the carrier rather than copied from another formula. An emulsion adds an oil–water interface and a new set of stresses, and its stability has to be measured in the emulsion. Ultraviolet light rearranges ergocalciferol, and a clear bottle on a bench is an exposure even in a dim room. Amber glass, an opaque softgel shell and a secondary carton each block part of that light; dropping one layer shortens the oil's useful life. ## What drives degradation Factors that move vitamin D2 oil during storage | Factor | What it does | Control | Oxygen | Lipid oxidation; peroxide value rises | Low headspace, sealed cap, antioxidant | Light | Photorearrangement of the vitamin; potency and colour change | Amber bottle, opaque shell, dark store | Heat | Accelerates oxidation and potency loss | Controlled store, cool process | Trace metals | Catalyse oxidation at low concentration | Avoid iron and copper contact; check the panel | Carrier unsaturation | A polyunsaturated oil oxidises faster than a saturated one | Choose and declare the carrier; monitor peroxide | Antioxidant | Consumed while it protects the oil | Declare the package and its level; do not assume carry-through The factors interact. A warm, bright store with a half-empty bottle adds heat, light and oxygen at once, and the peroxide value climbs faster than any one factor would suggest. The useful question is not whether vitamin D2 is stable in general, but how long it holds in a named carrier, pack and condition. ## A stability protocol for the oil A protocol is useful only when it fixes the pack, the condition, the time points and the test panel. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% cover the warehouse; 40 °C/75% is the accelerated stress condition. A light-exposure arm is added because a dark incubator cannot see the failure that ultraviolet light drives. At each point, measure potency by HPLC against an ergocalciferol standard, peroxide value, appearance and UV identity. For a softgel, test the fill and inspect the shell; for a bulk bottle, sample from the same lot and record the opening date. The report should list each result rather than a pass statement, and it should name the pack and the lot family. Ask for the summary that matches the pack you will buy. Headspace-to-oil ratio and opening history differ between the 1 kg and 5 kg bottles, and the data belongs to the pack it was generated on. A summary from another pack is a starting point only. ## The finished formula changes the question A softgel is more than its fill. The shell regulates water and oxygen transfer, can turn brittle as it loses water, and can absorb material from the fill; bulk oil data answers none of that. Test the finished unit. An oil blend brings its own risks: other oils may oxidise faster than the D2 carrier, and the pack may let more oxygen through than amber glass. The antioxidant has to protect the whole blend, not just the vitamin. Overage is set here from the potency curve and the end-of-life label claim; it cannot compensate for a light-permeable pack. ## How the shelf life is set No single shelf-life figure is published for vitamin D2 oil, because the carrier and the pack set it. The retest period in the specification is only as good as the stability file for that pack. A number without a pack, a condition and a test panel is a claim rather than a shelf life. Once the retest period has passed, re-assay the retained sample before any extension. Extension is never by assumption, and a bulk figure does not follow the oil into a repacked bottle or an oil blend. The product hub lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the solid grade is on the vitamin D2 page; the potency and peroxide methods are in the methods index; the release workflow is on the quality page. ### 04 Vitamin D2 oil: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-d2-oil/moq/ Reviewed: 2026-11-20 The MOQ for vitamin D2 oil is 1 kg, supplied in a 1 kg amber bottle; the 5 kg amber bottle is the larger standard pack. The standard pack is quoted at 1–7 days from confirmation. A firm quotation needs the potency and carrier, the quantity and pack, the destination and Incoterm, the documents and the intended market. In one lineOne kilogram is the smallest amber bottle that carries its own lot code, COA and retain sample, so it is the unit we quote as the minimum. ## Why the minimum is 1 kg A kilogram of 1.0 MIU/g oil carries 1,000 MIU, or one billion IU. At 1,000 IU per unit that is a million units. The minimum is not a consumption estimate; it is the smallest standard bottle that can be filled, labelled and traced. The oil is used by the milligram, so a kilogram is a bulk unit for a production run. Smaller orders are split from a larger lot and repacked. That adds handling, breaks the link to the original bottle and makes tracing harder, without changing the molecule. A gram-scale bench trial is therefore a documented repack from a released lot, not a standard catalog bottle. The 5 kg bottle reduces handling but ties up inventory and sits in storage longer. The choice is operational, not a volume incentive. ## Packs and formats Standard vitamin D2 oil packs | Pack | Net weight | Typical use | Notes | Amber bottle | 1 kg | Trial, sample, small batch | Light barrier; cap liner is the seal; lot code on the bottle | Amber bottle | 5 kg | Production | Larger headspace; plan the in-use period after opening | Powder on carrier | On request | Dry blends | A different specification, not a packing choice Amber glass shields the oil from light. The cap liner provides the seal, so an opened bottle no longer matches the sealed pack that left the fill line. Oxygen sits in the headspace, and filling closer to the shoulder leaves less of it. Powder on carrier is a separate product: solid carrier, different potency, different stability file. It cannot be ordered as a packing variant of the oil and needs its own specification and quotation. ## Lead time and handover The standard pack carries a 1–7 day lead time from confirmation. The window covers picking, paperwork and dispatch; transit, customs and the customer's own quality release sit outside it. A non-standard pack or a powder-on-carrier order adds time, and the quotation should state it separately. Ask for a dispatch date rather than relying on the range. The 1 kg bottle usually moves as a parcel; the 5 kg bottle may need an outer pack and a freight booking. The Incoterm says who pays freight and clears entry, and the lot documents should travel with the bottle. ## What a quotation needs A quotation can be compared only when it states six things: - Product and form. Ergocalciferol oil, CAS 50-14-6, with the carrier named. - Specification. Potency and assay method, carrier, antioxidant, peroxide value, metals and microbiology. - Quantity and pack. A 1 kg or 5 kg amber bottle, or a powder-on-carrier specification quoted separately. - Destination and Incoterm. The country, port or address, and the trade term. - Documents. COA, specification, SDS, carrier and allergen statements, and any market-specific declaration the importer needs. - Intended use and market. Supplement, food or another use, the dose, and the market of sale. Without the IU/g and the carrier, the offer cannot be compared. Two oils with the same potency can still differ in carrier, antioxidant and peroxide value, so the documents are part of what is being compared. Commercial terms stay off this page and appear on the quotation. ## The sample is a lot, not a demonstration Qualify from a 1 kg bottle. Test identity, potency, peroxide value and microbiology before scaling, and keep a retain from the same bottle. The sample, COA and quotation should carry one lot code; without that link the sample is only a demonstration. A trial that needs grams is a repack from a released lot, with its own handling record. It is not the 1 kg amber bottle. Confirm the split in writing and file the lot code with the trial results, since bench material and production material may come from different lots under the same specification. ## Terms to settle before the first order Settle these before the first order: Incoterm, bottle size, dispatch window, the current specification revision, a COA for every lot, a retain sample, the retest period and the route for change. Changing the carrier is a specification change, not a packing detail. A new carrier or antioxidant moves the label, the allergen statement and the stability file, so the buyer should approve it before the next lot. Put that approval step in the quality agreement. Settle a failed lot on the retain sample with a joint re-test against the named method; a photograph of the bottle proves nothing. Name the referee laboratory and who pays before a dispute starts. A return based on colour alone is hard to defend on either side. The catalog values are on the product page; release tests are on the COA page; the market file is on the compliance page; the solid grade is on the vitamin D2 page; the glossary defines MOQ; the assays are in the methods library; shipping is covered on the logistics page; release is on the quality page. ### 05 The regulatory file for vitamin D2 oil URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-d2-oil/compliance/ Reviewed: 2026-11-20 Vitamin D2 oil is ergocalciferol in a food-grade carrier, so the regulatory file has to cover the vitamin, the carrier and the label that declares both. The vitamin is permitted in supplements in the EU, the US and the UK, but the label rules, contaminant limits and claim conditions differ. The buyer's team confirms the route; this page lists the documents and checks. In one lineThe file has to connect the oil's carrier and IU declaration to the market: the vitamin may be permitted while the label or the carrier statement still fails. ## What the file contains The folder has four parts: the current specification for the oil, the certificate for the lot, the rules on limits and labels in the destination, and a record of how source, carrier and pack changes are controlled. The certificate describes the lot, the TDS describes the specification and the SDS covers handling; none of them proves the market route, which is a separate document. Carrier and antioxidant declarations, allergen and GMO statements, the origin record and any customer-specific paperwork belong in the same folder. Name a missing document while the order is still a quotation, because closing it after shipment costs more. A dated index at the front keeps every revision visible. ## European Union Directive 2002/46/EC lists the vitamins and forms permitted in food supplements; Annex II, Part A names ergocalciferol. The food-supplement list is the route here, not the novel-food route. A fortified food takes the addition route under Regulation (EC) No 1925/2006 instead, so the buyer settles which route applies. Labelling is governed by Regulation (EU) No 1169/2011: the label states vitamin D in micrograms per portion and as a percentage of the 5 µg (200 IU) nutrient reference value, together with the supplement particulars and the daily-dose warning. The ingredient list names ergocalciferol. If the carrier is a soy oil or another allergen, the allergen declaration follows the carrier and must be checked in the ingredient list, not added to the vitamin name. Under Regulation (EU) 2023/915, food supplements carry limits of 3.0 mg/kg for lead, 1.0 mg/kg for cadmium and 0.10 mg/kg for mercury. Total arsenic has no harmonised EU maximum, so the specification sets its own. Vitamin maxima are also unharmonised and may be set nationally. EFSA's adult tolerable upper intake level of 100 µg/day is a safety reference, not a product ceiling, as of this review. ## United States In the US, ergocalciferol sits in the dietary-ingredient route under DSHEA; its pre-15 October 1994 marketing history means no new dietary ingredient notification is needed. 21 CFR 111 applies to manufacture, including an identity test for each component and supplier qualification. The Supplement Facts format is set by 21 CFR 101.36: vitamin D in micrograms against a 20 µg (800 IU) Daily Value, with the IU optional in parentheses. The ingredient list identifies ergocalciferol. A structure/function statement carries the DSHEA disclaimer and stays clear of disease. A food use rather than a supplement is a different route, which the buyer confirms before the label is written. ## United Kingdom Great Britain and Northern Ireland do not share one rulebook. GB has its own food-supplement and labelling regime with a 5 µg reference intake; NI follows the EU framework, including Regulation (EU) No 1169/2011, under the Windsor Framework. The delivery address decides, and the choice should be noted on the order so the label citation can be checked later. ## Contaminants and limits A contaminant result on the drum is not the end of the calculation: the finished product and its daily dose decide the exposure. The table gives the catalog limits as a starting point; the destination text current at the time of sale settles the final figure. The oil is used in milligrams per unit, so its contribution is small, but show the arithmetic rather than assume it. Catalog limits and what the market file needs | Parameter | Catalog limit | What the file should show | Lead (Pb) | ≤3 mg/kg | Lot result, method and the finished-product contribution | Cadmium (Cd) | ≤1 mg/kg | Lot result and any category exception that applies | Mercury (Hg) | ≤0.1 mg/kg | Lot result and method | Arsenic (As) | ≤2 mg/kg | Result and the agreed limit, since the EU has no harmonised supplement maximum | Peroxide value | ≤10.0 meq O₂/kg | A quality limit, not a regulatory one; report it beside the panel | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Method and result for each test ## Claims for vitamin D2 EU claim law is Regulation (EC) No 1924/2006, read with the EU Register. A statement may be used only if it is on the Register, its conditions are satisfied and it does not cross into disease. Vitamin D entries exist, but this page does not reproduce them; the brand's reviewer decides whether one fits the product and dose. In the US, a structure/function statement needs substantiation and the DSHEA disclaimer. In the UK, the GB register governs Great Britain and the EU framework applies in Northern Ireland. The ingredient name is a specification term, not a claim: “ergocalciferol” and “vitamin D2” describe the material, not a benefit. No health claim is made here, and the brand owner owns every statement on the pack. ## Documents for the file Documents a brand should hold for a vitamin D2 oil lot | Document | What it should establish | Certificate of analysis | Lot code, IU/g and standard, UV identity, peroxide value, metals and microbiology | Specification | The release limits the certificate is judged against | Technical data sheet | Form, carrier, solubility, pack, storage and retest period | Safety data sheet | Handling, storage and transport classification | Source statement | Ergosterol route, manufacturing site and carrier source | Allergen and GMO statements | The declarations the destination market requires | Stability summary | The data behind the shelf life and the storage statement Origin is also a vegan question. D2 is produced by irradiating ergosterol, usually from yeast; the common D3 route begins with lanolin. A vegan claim needs the source statement to support the route actually used, and the statement is worth keeping in the file even where the market does not demand it. ## A short checklist - Does the certificate name the lot, the IU/g, the conversion and the ergocalciferol standard? - Is the carrier named, and are the carrier and antioxidant permitted for the intended use? - Are the four contaminant results inside the destination limits, and is the calculation shown? - Does the label use micrograms and the local reference value — 5 µg in the EU and UK, 20 µg in the US? - Does the ingredient list name ergocalciferol and carry the allergen statement for the carrier? - Does each claim on the pack fit this form, this dose and this market? - Do certificate, label and retained sample carry the same lot code? The catalog values are on the oil product page; the solid form is on the vitamin D2 page; the certificate is explained on the COA page; identity evidence is on the identity page; release is on the quality page; framework references are in the methods library. ### 06 How we prove a vitamin D2 oil lot is ergocalciferol URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-d2-oil/identity/ Reviewed: 2026-11-20 A vitamin D2 oil lot is ergocalciferol when the specification names the form and CAS 50-14-6, HPLC retention and the ultraviolet spectrum match an ergocalciferol standard, the IU arithmetic reconciles with the concentration, and the carrier and antioxidant are declared. At 1.0 MIU/g the vitamin is only about 2.5% of the oil, so colour proves nothing; the chromatogram carries the identity. In one lineIdentity in an oil is the chromatogram, the UV spectrum and the IU arithmetic agreeing, with the carrier and the D3 screen written into the record. ## The identity layers Naming the right material on paper does not prove that the material is in the bottle. The layers are separate questions, each with its own proof. Stopping at the first one proves only that the paperwork exists. Five checks that together identify a vitamin D2 oil | Layer | Question | Evidence | What it proves | Document | Is the form and CAS named? | Ergocalciferol, CAS 50-14-6, C28H44O | Paperwork only | Chromatography | Is the peak ergocalciferol? | HPLC retention against a D2 standard, with D3 separated | The molecule | Spectrum | Is the ultraviolet profile right? | UV maxima near 265 nm and the absorbance ratios | The chromophore | Mass balance | Does the IU/g match the mass? | IU/g ÷ 40 = µg/g, compared with the HPLC result | The concentration | Carrier | What carries the vitamin? | Carrier name, fatty-acid profile, allergen statement | The full composition ## The IU ratio and the mass balance Because 1 µg of ergocalciferol equals 40 IU, a 1.0 MIU/g oil holds 25,000 µg of the vitamin in every gram. That is 25 mg/g, or 2.5% by mass; the 1.1 MIU/g grade reaches 27,500 µg/g and 2.75%. These values come from the IU definition and are independent of the supplier. Audit the arithmetic in both directions: micrograms per gram from HPLC multiplied by 40 should equal the certificate's IU/g, and dividing IU/g by 40 should return the same micrograms. A mismatch means one figure is wrong. The certificate should show its conversion so a reader can reproduce it. At 2.5%, the carrier outweighs the vitamin by about thirty-nine to one, which is why the carrier record matters. A second ratio matters when both forms are screened. Ergocalciferol and cholecalciferol share the 40 IU per microgram convention and a similar ultraviolet spectrum, so the IU figure cannot separate them; retention time and the peak-area ratio can. A D2 peak with a D3 shoulder is a mixed lot even when the total vitamin D area sits inside the potency range. The certificate should name the D2 standard and give the D3 detection limit. Ergocalciferol is made by ultraviolet irradiation of ergosterol, and the reaction leaves a family of isomers. Previtamin D2, lumisterol and tachysterol can survive purification, and a related-substance method is what shows them. A lot can pass its potency range while the isomer profile moves, so the chromatogram deserves a look even when the IU number is comfortable. ## X-ray diffraction: what it can and cannot do here X-ray diffraction is a solid-state method: it asks whether a material is crystalline and whether its pattern matches a reference. An oil is a liquid solution, so XRD has no release role for it; a certificate claiming “XRD conforms” for oil says very little. Use the method on the crystalline raw material, on a powder on carrier, or on a solid that separates from the bottle. For the crystal, the melting range of 115–118 °C is the simpler solid-state check, and XRD is the stronger evidence when a lot is disputed or a new source is qualified. For the oil, the stronger evidence is HPLC with UV detection, the IU arithmetic and the carrier profile. A match statement needs the reference pattern and the detection limit before it can be read. ## What adulteration looks like Common vitamin D2 oil substitutions and the signals | Adulterant | What it does | Signal | Test | Vitamin D3 | Lower-cost source with the same IU convention | Different retention; D3 peak where D2 should be | HPLC/UV with both standards; LC-MS | Carrier dilution | Lowers IU/g while keeping the colour | Potency below the range; mass balance off | HPLC potency, IU arithmetic | Oxidised carrier | Rancid oil; vitamin loss follows | Peroxide value above the limit; odour | Peroxide value, fatty-acid profile | Undeclared carrier | Allergen or label mismatch | Fatty-acid profile differs from the declared oil | GC fatty-acid profile, allergen review | Isomer-rich D2 | Lower potency; extra related substances | Additional peaks; assay short of the label | Related-substance method, UV Appearance is the weakest evidence, because a pale yellow colour is easy to reproduce with another carrier. Retention time, UV spectrum, IU arithmetic and peroxide value are harder to fake. If a certificate reports colour and potency but no identity test, the most plausible substitution remains unchecked. ## How to write the identity into the specification - “Ergocalciferol oil, CAS 50-14-6, C28H44O, 1.0–1.1 MIU/g by HPLC.” - “Identification by HPLC retention against an ergocalciferol standard and by UV spectrum; state the wavelength.” - “Potency in IU/g with the micrograms-per-gram equivalent; the conversion is 40 IU per microgram.” - “Carrier oil named; antioxidant package named; peroxide value ≤10.0 meq O₂/kg.” - “A vitamin D3 screen where the form or the source is in question, with the detection limit.” - “Heavy metals and microbiology as listed; destination market confirmed before the order.” ## Six questions for the supplier - Who supplied the carrier oil, and where is it declared? - What potency did the lot release at, in both IU and micrograms? - Can we see the chromatogram and the spectrum, not just the final number? - Which antioxidant is present, and what peroxide value did the lot return? - Was a D3 screen run, and what limit of detection applies? - If we dispute the result, is a joint re-test on the retain sample available? Answers to those six questions amount to an identity file in practice; a single potency figure does not. The catalog values are on the product page; the COA page maps each certificate line; the grades page compares the formats; the oil-versus-powder page follows the carrier and label; the vitamin D2 page covers the solid grade; the methods library explains the tests; release is described on the quality page. ### 01 What the COA for vitamin K2 MK-7 oil actually contains URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k2-mk7-oil/coa/ Reviewed: 2026-11-20 A 1% MK-7 oil certificate has to answer four questions at once: how much menaquinone-7 the oil contains, which geometry that MK-7 has, whether the carrier is still sound, and what the other 99% of the product is. The catalog release lines cover the first and part of the third; the isomer figures and the carrier name are the lines a buyer has to ask for by name. In one lineThe assay on a 1% MK-7 oil is an as-is figure, and it means little without the all-trans ratio and the peroxide value beside it. ## Reading the lot certificate A certificate is only as useful as its least auditable line. Each row needs the parameter, the method and the limit the lot was released against; a bare “conforms” is a conclusion with the working removed. On this product the working includes a chromatogram, a titration for the peroxide value and a named carrier. The assay is the line that travels furthest in a quotation. Read it as the MK-7 content of the oil in the bottle, not as the purity of the concentrate used in the blend. At 1.05%, one gram of oil carries 10.5 mg of MK-7; the remaining mass is the carrier and any antioxidant the specification declares. Catalog release lines · vitamin K2 MK-7 1% oil | Test | Technique | Acceptance limit | Appearance | Visual | Yellow to amber, clear oil | Identity | HPLC retention time plus UV spectrum | Matches the reference standard | Assay (as-is, on the oil) | HPLC with UV detection | 1.0–1.1% MK-7 | Peroxide value | Iodometric titration | ≤10.0 meq O₂/kg | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate counts, yeast and mould, pathogen absence | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent Two things are absent from the catalog table: the all-trans and cis figures and the carrier oil. Neither is a release limit here, but both decide whether the lot is the product that was ordered. An assay without them describes a concentration, not a material. ## The as-is basis, the dose and the isomer line The figure is as-is on the oil. No anhydrous correction applies, because the lipid is the product and this catalog sets no loss-on-drying limit for it. The conversion is simple: 1.0% = 10 mg/g, 1.1% = 11 mg/g, so a 100 µg dose is 10 mg of oil at the low end and 9.1 mg at the high end. The powder's certificate works differently: MK-7 on a solid matrix, a loss-on-drying line, a particle-size line. The oil's matrix is a liquid, and its own quality gate is the peroxide value. A certificate issued for the concentrate before blending is a certificate for a different material. Isomerism is the second half of the assay. MK-7 is an all-trans molecule, and light or heat can rotate part of the chain into cis forms. The EU synthetic-route specification asks for at least 92% all-trans and no more than 6.0% cis. This catalog's release table does not print an all-trans limit, so the lot certificate should carry both figures and the purchase specification should state the limit the buyer needs. A 1.05% total can conceal a cis fraction above that limit. Peroxide value measures the first products of lipid oxidation, in milliequivalents of oxygen per kilogram. A lot at 9.5 is inside the 10.0 limit but has less room left than a lot at 2.0; read the number as a remaining-life indicator, not only as a pass mark. ## Release limit versus batch result Release limit and batch result answer different questions. The limit is the gate the lot had to pass; the result is the measurement on that lot. They belong in separate columns, with the method named beside each. Reading a result against its release limit | Line | Gate | Measured value | Assay | 1.0–1.1% as-is | The measured percentage and the basis used | Peroxide value | ≤10.0 meq O₂/kg | The measured value and the titration used | All-trans / cis | Agreed in the specification | Two measured shares of MK-7, not one total | Heavy metals | Per element | A number per element in mg/kg | Microbiology | Counts and absence | The count and the absence result for the lot A pass statement should be reconstructable from the figures. Heavy metals need a value per element, not a sum; microbiology needs a count and an absence statement; the isomer line needs the all-trans and cis figures, not an adjective. ## How lots differ An oil is a blend, so the assay follows the weigh-up: concentrate in, carrier in, and the percentage that results. Peroxide value follows the carrier lot, the antioxidant, the heat history and the days since filling. The all-trans share follows light and heat. Colour follows all of these and is the least specific of the signals. Look for direction across lots rather than a single result at an edge: peroxide rising, all-trans falling, assay drifting. Match the lot code on the certificate to the bottle, the carton and the retained sample before drawing a conclusion about a batch. ## Bringing in a referee laboratory An outside test is worth ordering when the source is new, the market is regulated, the peroxide result is disputed, the isomer profile is claimed but not shown, or the carrier is unclear. A useful panel is not a copy of the certificate: HPLC with UV spectrum for identity and assay, a dedicated isomer separation, peroxide value by titration, ICP-MS for metals, plate counts and absence tests, and a fatty-acid profile when the carrier oil itself is in question. Name the detection limit for every screen. A “not detected” result with no limit tells you about the method, not the sample. Keep the chain of custody tight: the tested sample should be the retained one, the report should name the lot, and a dispute should go to a referee with the retained sample, the certificate and the agreed specification in hand. ## Comparing two offers Six lines make a useful comparison: the form and carrier; the assay and its basis; the all-trans and cis figures; the peroxide value; the contaminant and micro panel; the pack and lot code. Two offers can match on assay and still describe different oils if the carrier or the isomer profile differs. The catalog ranges are on the vitamin K2 MK-7 oil product page. The tests that separate MK-7 from MK-4 and from the cis isomers are on the identity page; the powder alternative is on the MK-7 powder product page; the HPLC method is described in the methods index; the release procedure is described on the quality page. ### 02 Choosing a vitamin K2 MK-7 oil grade: carrier, concentration and form URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k2-mk7-oil/grades/ Reviewed: 2026-11-20 Vitamin K2 MK-7 oil is sold here at one concentration, 1.0–1.1% in a carrier oil, so the grade conversation is not about picking a stronger or weaker oil. It is about choosing a matrix: an oil for a lipid fill, a 1% spray-dried powder for a dry dosage form, or an isolated concentrate when the dose is large and the fill is small. The carrier and the production line decide, and the label follows. In one lineThe 1% concentration makes the dose weighable; the carrier and the dosage form decide whether the oil or the powder is the right grade. ## Start with the microgram on the label Start with the size of the dose on the label. A daily MK-7 claim is written in micrograms; a capsule fill, a tablet blend or the fill of a softgel is handled in milligrams. A 100 µg claim is 0.1 mg of pure menaquinone-7, a quantity that is awkward to weigh and awkward to spread evenly through a batch. Diluting the molecule to 1% turns that claim into roughly 10 mg of a material the line can actually handle. That dilution is the reason the 1% forms exist. It is not a comment on potency. The oil and the powder reach almost the same concentration, so the choice between them is about how the material behaves in the process and what the label has to declare. ## One molecule, three matrices The three MK-7 forms side by side | Form | MK-7 concentration | Matrix | Mass for 100 µg | Typical fit | MK-7 oil (this product) | 1.0–1.1% | Carrier oil, named on the specification | 9.1–10 mg | Softgels, oil blends, lipid fills | Spray-dried powder, 1% | 0.9–1.1% MK-7 | Starch or gum arabic matrix | 9.1–11.1 mg | Capsules, tablets, stick packs, dry blends | Isolated MK-7 | 97–102% (EU synthetic spec) | None | About 0.1 mg | Oil-filled capsules, concentrates, premixes The isolated grade is a reference point rather than a drop-in: at 97–102% it is the pure material described in the EU synthetic-route specification, and a 100 µg dose is 0.1 mg. The two 1% forms put the same molecule on different matrices. The oil is a liquid solution in a carrier oil; the powder is a solid dispersion on starch or gum arabic. The table keeps the concentration, the matrix and the dose mass in one view. ## How the matrix behaves An oil has no particle size and no flow to specify. It is a clear yellow to amber liquid that does not dissolve in water but mixes with fats and organic solvents. Those properties are the reason it belongs in a softgel or an oil blend and the reason it does not belong in a dry mix or a drink powder that has to disperse. The carrier oil is part of the specification and appears in the ingredient list; change the carrier and the allergen statement, the mouthfeel and the stability work all change. The powder brings the opposite set of properties: a solid that flows, blends and, with gum arabic, disperses in water. It carries a loss-on-drying limit and a particle-size limit. The oil's own release check is the peroxide value, which reports on the carrier's condition rather than on the MK-7 content. ## From micrograms to milligrams The label dose is MK-7, so the oil mass is the dose divided by the concentration. At 1.0%, 100 µg needs 10 mg; at 1.1%, 9.1 mg. The table also shows the powder's edges so a formulator can see how little the mass actually differs between the two 1% forms. MK-7 dose converted to oil and to 1% powder | Label dose (µg MK-7) | Oil at 1.0% (mg) | Oil at 1.1% (mg) | Powder at 0.9% (mg) | Powder at 1.1% (mg) | 50 | 5.0 | 4.5 | 5.6 | 4.5 | 100 | 10.0 | 9.1 | 11.1 | 9.1 | 200 | 20.0 | 18.2 | 22.2 | 18.2 | 500 | 50.0 | 45.5 | 55.6 | 45.5 | 1,000 | 100.0 | 90.9 | 111.1 | 90.9 These are minimum masses at release, before overage and before the remainder of the fill. A softgel fill is much larger than 10 mg; the oil is a concentrate that is diluted into it. A capsule built on the powder uses 10–11 mg as one component of a larger fill and carries the powder's carrier into the capsule as well. ## The clauses a purchase specification needs - “Menaquinone-7 1% oil, CAS 2124-57-4, C46H64O2; carrier oil named.” - “MK-7 1.0–1.1% by HPLC, as-is on the oil; identity by HPLC retention and UV spectrum.” - “All-trans and cis reported separately; the all-trans limit is written into the purchase specification.” - “Peroxide value ≤10.0 meq O₂/kg; antioxidant declared if used.” - “Heavy metals and microbiology as listed; 1 kg or 5 kg amber bottle.” - “Storage sealed, upright, dark and cool; destination market confirmed before the order.” ## When the oil is the wrong input Tablets, hard capsules, stick packs and dry blends are powder territory. A liquid oil adds a step to a dry process and cannot be made water-dispersible without an emulsion, so the 1% powder is the practical input. At the other end, a large dose in a small fill is a job for the isolated concentrate: at 1%, the oil would be mostly carrier. The oil wins when the fill is already a lipid: a softgel, an oil blend, a lipid-based delivery system. The powder wins when the fill is dry. A change in either direction is a new specification and a new label, not a mathematical conversion. The oil-versus-powder comparison takes the carrier, overage and label questions further. The catalog oil is on the product page; the powder is on the MK-7 powder page; the COA page sets out the certificate lines; the stability questions are on the stability page. ### 02.1 Vitamin K2 MK-7 oil vs powder: carrier, overage and the label URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k2-mk7-oil/grades/vitamin-k2-mk7-oil-vs-powder/ Reviewed: 2026-11-20 At 1% MK-7 the oil and the spray-dried powder are close to the same strength, so a switch between them is not a potency upgrade or downgrade. What changes is the body of the product: a lipid that mixes with oils versus a solid that disperses in water, and with it the overage calculation, the ingredient list and the pack. In one lineThe oil and the powder carry the same 1% MK-7, so the switch changes the carrier, the overage arithmetic and the label, not the strength. ## The carrier is the product The carrier is the larger part of both products. At 1% MK-7, roughly 99 g of every 100 g is carrier, and that carrier is what the process actually handles. In the oil it is a food-grade lipid named on the specification; in the powder it is starch or gum arabic, named on the powder certificate. Neither is a neutral filler: each one decides the allergen statement, the way the product mixes and the pack that protects it. The oil's lipid carrier is miscible with other oils, which is what a softgel fill or an oil blend needs. It is not water-dispersible, and a claim to the contrary needs an emulsified oil with its own data. The powder's solid carrier gives flow, blendability and, with gum arabic, water dispersibility, which is what a tablet, hard capsule or stick pack needs. The allergen question follows the carrier, so the oil and the powder can carry different declarations even when the MK-7 is identical. ## Both are 1%, so the fill weight barely moves The two forms are unusually close in concentration: oil 1.0–1.1%, powder 0.9–1.1%. A 100 µg dose is about 9–11 mg of either, so the fill weight does not change much. The table shows the edges. The same MK-7 dose in oil and in 1% powder | Label dose (µg MK-7) | Oil at 1.0% (mg) | Oil at 1.1% (mg) | Powder at 0.9% (mg) | Powder at 1.1% (mg) | 50 | 5.0 | 4.5 | 5.6 | 4.5 | 100 | 10.0 | 9.1 | 11.1 | 9.1 | 200 | 20.0 | 18.2 | 22.2 | 18.2 | 500 | 50.0 | 45.5 | 55.6 | 45.5 These are release minimums, before overage and before the rest of the fill. A softgel fill is far larger than 10 mg, so the oil is diluted into the fill. A capsule built on the powder uses 10–11 mg as one part of a larger fill and brings the solid carrier with it. Same dose, same order of mass, different handling. ## The overage is a formula decision The assay range is not an overage. A formula written at 1.0% and a lot that assays at 1.1% already carry about 10% more MK-7 than the calculation. If the formulator then adds 10% overage for shelf-life loss, the batch leaves with roughly 21% above the label target. The two effects are separate and both belong in the same calculation. The overage itself is set from the stability curve for the finished form. Oil and powder fail by different routes: the oil's carrier oxidises and its all-trans share can fall, while the powder picks up moisture and loses potency under light. A number taken from the other form's stability file is not transferable. Process loss is a third input: oil clings to tanks and lines, powder dusts and blends unevenly, and the overage has to cover the route that actually applies. None of this repairs a bad pack. An overage cannot compensate for a bottle that admits light or a pouch that admits moisture. ## What the label has to declare The label declares the vitamin, not the 1% figure. In the EU, the novel-food designation is “Menaquinone” or “Vitamin K2”; the ingredient list names what is present, and the amount is stated per daily portion in micrograms against the 75 µg reference intake. In the US, the Supplement Facts panel reports vitamin K (as menaquinone-7) in micrograms and as a percentage of the 120 µg Daily Value. The carrier and any antioxidant go in the ingredients list in both markets. Label elements for the two forms | Element | EU | US | Nutrient name | Menaquinone or vitamin K2 | Vitamin K (as menaquinone-7) | Amount and reference | µg per daily portion; % of 75 µg NRV | µg per serving; % of 120 µg Daily Value | Carrier | Ingredient list; allergen declaration if the carrier requires one | Ingredient list; allergen declaration if the carrier requires one | Dispersion wording | A water-dispersible claim needs supporting data | A water-dispersible claim needs supporting data The oil cannot support a water-dispersible statement; the powder can, within the limits of its carrier. A label written for one form is not valid for the other even when the microgram figure matches. The concentration stays on the specification, and “all-trans” stays a specification term rather than a claim. ## The pack and the failure route change Pack follows failure route. The oil goes into amber glass because light and oxygen are what attack it; the powder goes into a foil pouch because moisture and light are what attack it. A softgel adds an opaque shell and a low-oxygen fill space; a stick pack adds a foil barrier and a sealed seam. Changing the pack means generating new stability data, not just buying a different container. At the bench, handle them differently. The oil is mixed before weighing and warmed only gently if it is viscous, and the bottle is closed between uses. The powder is kept dry, resealed and out of humid air. Both dislike heat, and neither belongs in a hot loading bay. The oil stability page carries the protocol. ## When to choose the oil and when the powder Pick the oil when the fill is a lipid: a softgel, an oil blend, a lipid-based delivery system. Pick the powder when the fill is dry: a tablet, a hard capsule, a stick pack, a dry blend. Pick neither when the dose is large and the fill is small; an isolated concentrate is the better physical fit. The switch is a reformulation. It needs a new specification, a new label and a new stability file, and it belongs in the change-control process. The oil product page carries the oil specification; the spray-dried powder page covers the solid grade; the grades page compares them with the other MK-7 forms; the compliance page covers the market file; the methods index explains the assays; the quality page describes release. ### 03 MK-7 oil is light- and heat-sensitive; the carrier and the bottle set the shelf life URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k2-mk7-oil/stability/ Reviewed: 2026-11-20 MK-7 oil does not fail for lack of moisture. It fails on two clocks: the carrier oxidises, which the peroxide value records, and the all-trans side chain isomerises, which the all-trans figure records. Potency is the last number to move, so a shelf life built only on assay is built on the slowest signal. In one lineThe oil protects MK-7 from moisture but not from light, heat or oxygen: the peroxide value and the all-trans ratio are the early warnings before the assay moves. ## Dry storage, the cap and the headspace An oil is not a dry powder, but the dry-storage instruction still has a job. The lipid does not pick up water the way a powder does; what it picks up is oxygen every time the bottle is opened. A dry, sealed, upright bottle in the dark is the starting condition, and the cap liner is the part that keeps it. Glass is a light barrier, not a gas barrier. The headspace in a part-used bottle is the oxygen reservoir, and a 1 kg bottle opened daily for a month has a different history from one opened twice. Split a working stock into smaller amber bottles if the bench will be in and out of the container; keep the bulk bottle closed. Condensation on a cold neck is a small but real route for water into the oil, and humidity also attacks the label, cap and carton. ## The oil is already a solution The oil is a solution of MK-7 in a carrier, not a suspension, so there are no particles to settle. The 1.0–1.1% figure is the concentration of that solution, and diluting it into a softgel fill changes the volume and the oxygen exposure per unit of MK-7, not the chemistry of the molecule. A fill blend adds its own risks. Other triglycerides can be more unsaturated than the MK-7 carrier, and the antioxidant has to protect the whole blend; an antioxidant chosen for one carrier is not automatically right for another. An emulsion introduces an interface and mechanical stress, and its stability has to be tested as an emulsion. Water is not a solvent for MK-7, and a water-dispersible claim requires an emulsified system with data behind it. Light exposure is cumulative. Amber glass, an opaque softgel shell and a carton are three barriers doing the same job; each one removed shortens the oil's useful life. ## What drives degradation Stressors that shorten the oil's useful life | Stress | Effect | Practical control | Light | Cis formation and photodegradation | Amber glass, opaque shell, dark storage | Oxygen | Carrier oxidation; peroxide value climbs | Sealed closure, small headspace, antioxidant | Heat | Speeds both oxidation and isomerisation | Cool storage and a cool process | Trace metals | Catalyse oxidation at very low levels | No iron or copper contact | Carrier unsaturation | More double bonds means faster oxidation | Declare the carrier; monitor peroxide | Antioxidant | Its protection is used up over time | Declare type and level; verify carry-through | Isomerisation | All-trans turns toward cis | Limit light and heat; trend the ratio None of these factors acts alone. A warm, bright, half-empty bottle combines heat, light and oxygen, and the peroxide value can move faster than any one factor would predict. The useful question is not whether MK-7 is stable, but how long this oil holds in this pack under this condition. ## A stability protocol for the oil Write the protocol around four fixed variables: which pack is tested, where it is stored, when it is sampled and what is measured. A typical design uses 25 °C/60% RH for long-term, 30 °C/65% RH as an intermediate condition and 40 °C/75% RH as the accelerated arm; a light-exposure arm is added because a dark chamber cannot reveal a photochemical failure. At each point, test MK-7 by HPLC, the all-trans and cis figures, peroxide value, appearance and UV identity. Bulk oil and softgel are different samples: test the fill and the shell for the softgel, and record the opening date for a bulk bottle. Report the individual results; a pass/fail summary hides the trend. Ask for data on the exact pack on order. Headspace-to-oil ratio differs between a 1 kg and a 5 kg bottle, and so does the opening history. Data from a different pack is a starting point, not a substitute. ## The finished formula changes the answer A softgel is a package, not just a fill. The shell controls water and oxygen transfer, can become brittle as it loses water, and can absorb material from the fill. Those are shelf-life questions for the finished unit, and bulk oil data cannot answer them. An oil blend has its own exposure. The other oils may oxidise faster than the MK-7 carrier, and the pack may be more permeable than amber glass; the antioxidant has to protect the blend, not only the vitamin. A dry blend carrying the oil on a solid is a third matrix with its own test. Overage belongs here. It is set from the potency curve and the label claim at the end of the shelf life, and it is a finished-formula decision. It does not compensate for a pack that admits light or a fill that oxidises. The oil-versus-powder comparison sets out how the overage differs between the two forms. ## How the shelf life is set MK-7 oil does not carry a single shelf-life number in this catalog. The carrier, the antioxidant package and the pack set it, and the number has to come with the conditions and the test panel that support it. A figure without those is a sales statement, not a shelf life. Extending a retest period starts with re-testing the retained sample. It is not an assumption, and a bulk figure does not transfer to a repacked bottle. Pack sizes are on the product page, release tests on the COA page, pack and lead time on the MOQ page, the assay methods in the methods index, and the release workflow on the quality page. ### 04 Vitamin K2 MK-7 oil: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k2-mk7-oil/moq/ Reviewed: 2026-11-20 The minimum order is a 1 kg amber bottle, with a 5 kg amber bottle as the bulk pack; the standard lead time is 1–7 days from confirmation. The bottle is the unit of sale because it is the unit of filling, sealing, sampling and lot identification, and the quotation should be built around it. In one lineOne kilogram is the smallest pack that can be filled, sealed, sampled and traced as a lot; the amber bottle, not a drum, is the unit. ## Why the minimum is 1 kg One bottle is enough for a bench trial, a retained sample and an independent test, and it still travels as a parcel rather than a pallet. That combination is why the pack is the minimum: the buyer gets a sealed, labelled unit with a lot code, not a scoop from a drum. Smaller quantities are split from a larger lot and repacked. The split adds handling, separates the material from its original bottle and lot code, and makes a later dispute harder to resolve. The 5 kg bottle lowers the handling per kilogram but ties up inventory and leaves a larger headspace once opened. The minimum is a pack decision, not a volume discount. ## Packs and formats Standard vitamin K2 MK-7 oil packs | Pack | Net weight | Typical use | Notes | Amber bottle | 1 kg | Trial, sample, small batch | Light barrier; reseal after opening; lot code on bottle and carton | Amber bottle | 5 kg | Production | Larger headspace to manage after opening; lot code on bottle and carton Two amber bottles are the catalog packs. The closure, the headspace and any inert-gas flush are pack details to agree in writing, and a different bottle size is a new pack specification because the headspace-to-oil ratio changes. The oil does not ship in a foil pouch or a fiber drum here; those are the formats used for the spray-dried powder. ## Lead time and dispatch The quoted lead time is 1–7 days from confirmation. The clock covers picking, paperwork and handover to the carrier; transit, customs and the customer's own release are outside it. A non-standard pack or a market-specific document set adds time and should be scheduled separately. Ask for a dispatch date rather than a range. A 1 kg bottle normally moves as a parcel and a 5 kg bottle as a heavier parcel or a pallet; the Incoterm decides who books the freight and who clears entry. The COA and the other lot documents should travel with the pack, not follow it. ## What a quotation needs A quotation that can be compared needs six things: - Product and form. Vitamin K2 MK-7 1% oil, CAS 2124-57-4, with the oil form written out. - Specification. Assay, all-trans and cis figures, peroxide value, carrier oil and antioxidant, heavy metals and microbiology. - Quantity and pack. 1 kg or 5 kg amber bottle, and the number of bottles. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. Certificate, specification, safety data sheet and any statement the importer needs for the market. - Intended use and market. Softgel, oil blend or another use, and the market where it will be sold. Leave out the carrier or the market and the offer cannot be checked against the specification. The same oil can fit one destination and fall outside the file for another. Commercial terms are not published here; they belong on the quotation. ## The sample is a lot, not a demonstration The 1 kg bottle is also the qualification unit. Test assay, all-trans and cis, peroxide value and microbiology before scaling, and keep a retained sample from the same bottle. The lot code on the sample, the certificate and the quotation should agree; without that link the sample is a demonstration, not a qualification. A trial that needs less than a kilogram is a repack, not the catalog bottle. It comes out of a bulk lot, gets its own handling record and cannot be presented as the 1 kg pack. Ask for the split in writing and keep its lot code with the trial results; the oil on the bench and the oil in the production bottle may not share a lot even when the specification is identical. ## Terms to settle before the first order Settle the commercial and quality terms together: trade term, bottle size, dispatch window, the specification revision, a certificate per lot, the retained sample, the retest period and the change-control route. A quality agreement signed before the first production order is easier than the same conversation after a dispute. If a lot misses the agreed specification, the evidence is the retained sample and a joint re-test against the named method, not a photograph of the bottle. The quotation and the agreement should name the referee laboratory and say who pays for it. A return based on appearance alone is difficult to defend on either side. The product hub lists the catalog ranges; the COA page lists the release tests; the compliance page covers the market files; the MK-7 powder page shows the other pack format; the logistics page covers shipping and documents. ### 05 The regulatory file for vitamin K2 MK-7 oil URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k2-mk7-oil/compliance/ Reviewed: 2026-11-20 The permission for an MK-7 oil is not a property of the oil as a whole. It is a property of the menaquinone-7 in it — its form, source and specification — while the carrier oil and any antioxidant are food ingredients with their own permitted status and their own place on the label. That split is the first thing a market file has to show. In one lineThe oil does not have its own permission: the MK-7 in it must meet the entry and the carrier oil must be a permitted, declared food ingredient. ## Five checks, not one An oil file can be checked in five passes: the MK-7 form and source are permitted; the MK-7 in the lot meets the specification the permission cites; every non-MK-7 component is a permitted food ingredient at its level; the label uses the permitted name and units; and each claim is allowed for this ingredient and this market. A single certificate answers only the second pass. The five can fail separately. A lot can comply while its label does not, and a permitted claim can be attached to the wrong form or source. The rest of this page takes them in order. ## The EU novel-food entry and the oil matrix The Union list of novel foods sits in Regulation (EU) 2017/2470. Its vitamin K2 (menaquinone) entry covers material from a synthetic or a microbiological process. For the synthetic route the entry specifies 97–102% menaquinone-7, at least 92% all-trans, no more than 6.0% cis and no more than 2.0% other impurities; the microbiological route names a Bacillus source, including Bacillus subtilis ssp. natto, and has its own specification. The entry fixes the label designation as “Menaquinone” or “Vitamin K2”. Food-supplement use runs through Directive 2002/46/EC, Regulation (EU) No 609/2013 and Regulation (EC) No 1925/2006, subject to the entry's conditions. Check the current consolidated text rather than a summary: the annex is amended, and the source route can change which specification applies. Read the oil as a formulation of the authorised MK-7, not as a new menaquinone. The MK-7 must meet the entry; the carrier oil must be permitted and declared; the antioxidant, if present, must be permitted at its level. Diluting the MK-7 into a lipid does not relax the specification it has to meet. ## The US dietary-ingredient route US marketing of MK-7 as a dietary ingredient rests on DSHEA. The supplier should state whether the ingredient was on the market before 15 October 1994 or is supported by a new dietary ingredient notification. A GRAS notice for a conventional food use is not a substitute for that dietary-ingredient basis. Manufacture falls under the dietary-supplement cGMPs in 21 CFR 111, and the Supplement Facts panel under 21 CFR 101.36. Vitamin K is declared in micrograms with the source in parentheses. A structure/function statement carries the DSHEA disclaimer and cannot be a disease claim. The file needs the ingredient basis, the specification and the lot certificate, plus supplier documentation for the carrier and any antioxidant. ## The limits in the file Release limits that the market file can be built on | Parameter | Catalog limit | What the file should show | Heavy metals | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | ICP-MS results against the market's contaminant ceilings | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Method and result for each test | Peroxide value | ≤10.0 meq O₂/kg | A measured result and the titration method; a quality limit, not a legal maximum | All-trans / cis | Agreed in the specification | Measured figures against the entry's specification The table lists catalog release limits. It is not a statement that every destination applies the same legal maximum: contaminant ceilings are set by the market and can be tighter for a category. The certificate supplies the measured result; the file maps that result to the ceiling for the product being sold. The peroxide value is a quality gate, not a legal limit. ## Where the claim boundary sits EU nutrition and health claims fall under Regulation (EC) No 1924/2006 and the EU Register. A claim is usable only when it is on the Register, the conditions of use are met and the statement is not a disease claim. Vitamin K has authorised claims, but none is reproduced or relied on here; the brand's own review decides what is available for its product and dose. “MK-7”, “all-trans” and “1% oil” are specification vocabulary, not claims. In the US a structure/function statement needs the DSHEA disclaimer and must avoid disease claims. Great Britain runs its own register and enforcement, so an EU-authorised claim is not automatically available there. ## The document set Documents a brand should hold for an MK-7 oil lot | Document | What it should establish | Certificate of analysis | Lot code, assay, all-trans and cis figures, peroxide value, carrier, metals, micro | Technical data sheet | Oil grade, carrier, solubility, pack and storage | Safety data sheet | Handling, transport and storage classification | Specification | The limits the lot is judged against | Allergen and GMO statements | Carrier source and the declarations the market requires | Source statement | Synthetic or microbiological route, and the manufacturing site | Novel-food statement | How the MK-7 maps to the EU or GB entry | Carrier and antioxidant statement | Permitted status and level of each added component ## A short checklist - Is the lot certificate tied to a lot code that also appears on the bottle? - Does the assay match the agreed range, with the as-is basis stated? - Are all-trans and cis reported as separate figures? - Is the carrier oil named and permitted? - Is the antioxidant named, with its level? - Does the label use the market's designation, units and reference intake? - Is every claim allowed for this form, source and market? - Does the source statement match the list entry the file relies on? The catalog specification is on the vitamin K2 MK-7 oil product page. The certificate is explained on the COA page; the carrier and grade on the grades page; the isomer evidence on the identity page. Market notes sit in the EU, US and UK regulatory pages, and the release workflow is on the quality page. ### 06 How we prove a 1% MK-7 oil is menaquinone-7 URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k2-mk7-oil/identity/ Reviewed: 2026-11-20 Identity for a 1% MK-7 oil is not one test. It is the agreement of four measurements: the chromatogram identifies the menaquinone, the isomer separation fixes the geometry, the assay and carrier declaration account for the dilution, and the peroxide value says whether the oil is sound. Colour tells you almost nothing. In one lineThe total MK-7 figure can pass while the geometry fails; an oil's identity file is the chromatogram, the all-trans ratio and the carrier, not the colour. ## Five checks that have to agree Naming the material on a certificate is the easy part; showing that the lot matches the name takes independent measurements. The table separates the questions so each can be answered on its own evidence. Five layers of vitamin K2 MK-7 oil identity | Check | What it answers | Evidence | What it leaves open | Document | Is the form and carrier declared? | Name, CAS number, formula, carrier | The paper trail only | HPLC and UV | Is the quinone MK-7? | Retention time plus UV spectrum | The geometry of the chain | Isomer separation | Is it all-trans MK-7? | All-trans and cis by HPLC | The total potency | Mass balance | Does the 1% add up? | Assay plus declared carrier | The state of the carrier | Oil quality | Is the carrier sound? | Peroxide value, appearance, odour | The identity of the MK-7 ## The all-trans ratio: proving the geometry The all-trans requirement is a geometry requirement. MK-7's side chain has seven isoprene units, and the all-trans form is the natural configuration; light and heat can convert part of it to cis. The EU synthetic-route specification sets a floor of 92% all-trans and a ceiling of 6.0% cis, and that is the reference for the MK-7 in the oil. An assay that reports total MK-7 cannot enforce either limit. The number is a sum over the geometries, so a lot can pass on total and fail on all-trans. Ask for two figures and the method that produced them: the column and mobile phase have to resolve the isomers, not merely elute one peak. ## Why XRD does not identify an oil X-ray diffraction reads crystal lattice spacing, which is why it is useful for a solid. An oil has no lattice to read. A diffraction pattern from an oil is broad and uninformative, and an “XRD conforms” statement on an oil certificate has no reference phase behind it. The test belongs to a crystalline material, such as isolated MK-7 or a crystalline carrier or adulterant in a powder. For the oil, the structural evidence is the UV spectrum, the retention time and the isomer separation. A supplier who offers XRD for a liquid is probably reusing a powder certificate; ask which phase was measured and which reference was used. A genuine oil can still fail the audit on that point. ## Where substitutions show up Common MK-7 oil substitutions and the signals | Adulterant or fault | What it does | Signal | Test | MK-4 in place of MK-7 | A different menaquinone under the same vitamin K2 name | Retention time and molecular mass differ | HPLC/UV, mass spectrometry | Vitamin K1 addition | Raises total vitamin K without adding MK-7 | Extra peak; source mismatch | HPLC separation | Low all-trans oil | Total MK-7 passes; geometry fails | Cis fraction above the limit | Isomer separation | Excess carrier | Assay under 1.0%; carrier above declaration | Mass balance fails | Assay plus carrier declaration | Carrier substitution | Allergen and stability profile change | Fatty-acid profile differs | GC-FID fatty-acid profile | Oxidised carrier | Off-odour and MK-7 loss | Peroxide value high | Peroxide value, sensory Appearance is the weakest evidence. The oil is allowed to run from yellow to amber, and a darker lot can be an older carrier or a different carrier without any change in the menaquinone. The measurements that separate a genuine lot from a substitution are the retention time, the UV spectrum, the isomer ratio and the mass balance. A certificate that shows appearance and assay but no identity work has tested the least specific properties. ## The identity clauses in the specification - “Menaquinone-7 1% oil, CAS 2124-57-4, C46H64O2; carrier oil named.” - “MK-7 1.0–1.1% by HPLC, as-is on the oil; identification by retention and UV spectrum.” - “All-trans and cis reported separately; all-trans at least 92% of MK-7 unless another limit is agreed.” - “Peroxide value ≤10.0 meq O₂/kg; antioxidant declared if present.” - “No MK-4, vitamin K1 or other menaquinone above the stated limit.” - “Source route and destination market confirmed before the order.” ## Five questions to put to the supplier - Which menaquinone is in this lot, and what CAS number is declared? - Will you send the chromatogram and UV spectrum, not just the assay figure? - What are the all-trans and cis percentages, and which method separated them? - Which carrier oil and antioxidant are present, at what levels? - What is the peroxide value, and will you re-test the retained sample jointly if it is challenged? Those five answers, taken together, are the identity file. A single assay figure is not. The product hub lists the catalog ranges; the COA page explains how each figure is reported; the grades page compares the forms; the MK-7 powder page shows the solid alternative; the methods index explains the separation. ### 01 What the zinc acetate COA actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-acetate/coa/ Reviewed: 2026-11-20 The certificate for a zinc acetate dihydrate lot reports appearance, zinc and acetate identity, assay by complexometric titration at 99.0–101.0%, elemental zinc at 29.0–32.0%, water by Karl Fischer at 10.0–14.0%, the heavy-metal panel, microbiology and an 80 mesh particle size. The limits below are the catalog specification; the batch COA is the document that confirms a particular pouch or drum. In one lineThe assay, the zinc figure and the water line are three views of the same dihydrate; the certificate is only readable when each one carries its basis and its method. ## The certificate as a test report A certificate is auditable when every row carries what was measured, the method that produced the number, and the limit the lot was released against. A row that says only “conforms” gives a verdict without evidence. On this salt the identity row has to show both ions, because a zinc figure alone would also fit zinc sulfate, zinc oxide or a zinc chelate. Water is a Karl Fischer result, not a loss on drying, because the crystal water is part of the molecule. Identity, assay, water and contaminants · zinc acetate dihydrate | Parameter | Method | Release limit | Appearance | Visual | White to off-white, free-flowing powder | Identification | Zinc reaction, acetate reaction and IR | Conforms to the reference | Assay (dried basis) | Complexometric titration | 99.0–101.0% | Zinc (Zn) | Complexometric titration (EDTA) | 29.0–32.0% | Water | Karl Fischer | 10.0–14.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh ## The basis: assay, zinc and water on one mass balance The formula C4H6O4Zn·2H2O has a molar mass of about 219.50 g/mol. Zinc is 65.38 of that, or 29.8%; two acetate ions are 118.09, or 53.8%; two water molecules are 36.03, or 16.4%. The catalog ranges sit on that balance: zinc 29.0–32.0% and water 10.0–14.0% describe a dihydrate that has lost part of its crystal water. A drier lot carries more zinc per gram; that is a hydration difference, not a stronger product. The assay basis has to be printed in the row. A 99.0–101.0% figure read as-is cannot sit beside a 12% water result, because the salt and the water would add to more than 100% of the powder. Read on the dried basis, the numbers reconcile: a lot at 12.0% water and 31.0% zinc is about 87% zinc acetate as-is, and the dried-basis titration is close to 100%. The acetate line is the other half of the identity: one zinc ion for every two acetate ions, so the zinc titration and the acetate reaction should agree. ## Release limit versus batch result The release limit is the acceptance boundary; the batch result is what the laboratory measured on that lot. Both belong on the page, in separate columns, with the method beside them. A result column filled with the specification range is not a result. What the result column should contain | Parameter | Release limit | Result column | Assay | 99.0–101.0% dried basis | A measured percentage, with the basis and the method | Zinc | 29.0–32.0% | A measured percentage by EDTA titration | Water | 10.0–14.0% | A measured percentage by Karl Fischer | Identification | Zinc and acetate conform | The tests performed and the IR reference used | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot | Particle size | ≥95% through 80 mesh | The measured percentage through the sieve One cross-check catches most certificate errors before a sample is opened. Zinc high with water low is a drier hydrate; zinc low with water high is surface moisture or a dilution. A certificate that reports both lines without that check has left the arithmetic to the reader. ## What moves between batches Water is the first variable. Zinc acetate dihydrate is hygroscopic, and it can also lose crystal water in a dry store, so the Karl Fischer result moves in both directions. The assay on the dried basis can stay inside 99.0–101.0% while the as-is zinc figure shifts, which is why the water line belongs on the release certificate and not only on a stability report. Particle size is the second. The catalog form is an 80 mesh powder; granulation is a separate on-request format. Milling and sieving change flow, dust and dissolution without changing the chemistry. Colour and odour are weaker signals: a yellow or brown tint points to iron, and a sharp acetic odour can indicate free acid or a moisture problem. The lot code on the certificate should match the pouch, the drum and the retained sample. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a disputed hydrate or salt claim, or an unreconciled result. The useful panel is not a full repeat: EDTA titration for zinc, Karl Fischer for water, an acetate test by ion chromatography or titration, ICP-MS for the metals, microbiology, and FTIR or XRD for the solid form. Add a sulfate test by ion chromatography when the salt is in question. Zinc sulfate is the nearest substitute and can pass a zinc assay; the sulfate result and the lower solution pH are what separate it from the acetate. Ask the laboratory for its detection limit on each screen, and keep the sample tested as the sample retained. ## What to compare between suppliers Put six lines side by side: form and CAS number; assay result with its basis; zinc and water results; acetate identity and a sulfate result; heavy metals and microbiology; pack size and lot code. Two quotations that agree on assay but differ on water or the acetate test are not describing the same powder. The second layer is traceability: who manufactured the lot, which zinc and acetate sources were used, and which drying and milling steps were applied. The catalog specification sits on the zinc acetate product page. The tests that separate the dihydrate from other zinc salts are on the identity page; the salt comparison is on the grades page; the methods are in the analytical methods library; the release workflow is on the quality page. ### 02 Zinc acetate or another zinc salt: what the grade changes URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-acetate/grades/ Reviewed: 2026-11-20 A zinc label declares the element, but the drum contains a salt, and the salt is most of the mass. Zinc acetate dihydrate carries about 29.8% zinc, 53.8% acetate and 16.4% water at the theoretical formula; zinc sulfate heptahydrate carries about 22.7% zinc; zinc gluconate about 14.3%; zinc citrate dihydrate about 32.1%. The grade question is a salt question first and a mesh or granulation question second. In one lineThe salt decides the zinc per gram, the pH in solution and the name on the label before the mesh or the pack matters. ## One element, several salts Zinc acetate dihydrate, C4H6O4Zn·2H2O, has a molar mass of about 219.50 g/mol and a theoretical zinc content of 29.8%. The acetate is a weak-acid anion, so an aqueous solution sits close to neutral rather than strongly acidic. That single property separates the salt from zinc sulfate at the formulation stage, before the assay or the certificate is discussed. The catalog form is an 80 mesh powder; granulated material is available on request. Mesh and granulation change flow, dust and dissolution, not the zinc figure. The catalog zinc range of 29.0–32.0% and water range of 10.0–14.0% describe a dihydrate that has lost part of its crystal water, so a lot near the top of the zinc range is drier, not stronger. The label names the salt, not only the element, and a change of salt is a change of ingredient. ## The options side by side Zinc salts and acetate formats · what changes in the drum | Salt or form | Zinc | Water | In water | Fits | Watch | Zinc acetate dihydrate, 80 mesh | 29.0–32.0% | 10.0–14.0% Karl Fischer | Freely soluble; pH 6–8 at 5% | Capsules, tablets, powder blends, sticks | Hygroscopic; fine powder dusts | Zinc acetate, granulated | Same specification | Same specification | Same as the 80 mesh line | Tablets, sachets, blends | Granulation aids must be declared | Zinc sulfate heptahydrate | 22.0–23.0% | 43.0–46.0% | Freely soluble; pH 4.4–5.6 at 5% | Capsules, tablets, powder blends | Acidic; about 44 mg per 10 mg zinc | Zinc gluconate | 12.5–14.0% | ≤1.0% loss on drying | Freely soluble; near neutral | Clear drinks, syrups, capsules | About 70 mg per 10 mg zinc | Zinc citrate dihydrate | 31.0–32.5% dried basis | ≤6.0% loss on drying | Slightly soluble; dispersion | Capsules, tablets, opaque sticks | Suspension settles on standing The first two rows are process variants of one salt; the last three are different anions and different specifications. Moving between the acetate block and the sulfate block changes the CAS number, the zinc per gram, the solution pH and the label name. ## Solubility, pH, taste and the powder in the room Zinc acetate dissolves freely and gives a clear, colourless solution. A 5% solution sits at about pH 6–8, close to neutral, and the acetate provides some buffering around that range. The taste is saline and faintly metallic, with a slight acetic note that becomes more noticeable as the concentration rises. None of those descriptions replaces a trial in the real matrix: the sugar system, the acidulant, the flavour and the serving temperature decide what the consumer tastes. Zinc sulfate is the acidic alternative. A 5% solution sits at about pH 4.4–5.6, and the taste is more astringent at the same zinc concentration. Zinc gluconate is mild and freely soluble, which suits clear drinks; zinc citrate is only slightly soluble and behaves as a dispersion. The acetate sits between the gluconate and the sulfate on mass per milligram of zinc, with a near-neutral solution that is useful in pH-sensitive matrices. Powder handling is the second physical question. The 80 mesh acetate flows well but dusts and picks up moisture in an open liner; a granulated grade is easier to run on a tablet press and generates less dust. The pack has to be closed after sampling, and the scoop should not stay in the drum. ## What the dosage form can carry The arithmetic is division, and it decides most capsule projects. At 29.8% zinc, a 10 mg claim needs about 33.6 mg of zinc acetate dihydrate; at 22.7%, the same claim needs about 44.0 mg of zinc sulfate heptahydrate. At 50 mg the weights are about 167.8 mg and 219.9 mg. The gluconate needs about 70 mg for 10 mg of zinc, and the citrate about 31 mg. Those are theoretical figures; the certificate's zinc result is the number to use at the balance. The difference is large enough to change the dosage form. A small capsule that fits 33.6 mg of acetate may not fit 44 mg of sulfate plus the excipients, and a tablet built on the sulfate needs more compression mass for the same claim. A stick pack or a clear drink takes the acetate because it dissolves without a dispersion. A lozenge or a chew can use the acetate's near-neutral solution and mild taste, but the sugar and acid system still has to be tested. The label follows the salt. A Supplement Facts panel declares “Zinc (as zinc acetate)” and the elemental zinc per serving; the ingredient list names zinc acetate. A panel written for zinc sulfate is not a label for the acetate even when the elemental zinc figure is the same. ## How to write the specification - “Zinc acetate dihydrate, C4H6O4Zn·2H2O, CAS 5970-45-6.” - “Assay 99.0–101.0% by complexometric titration; state the basis.” - “Zinc 29.0–32.0%; water 10.0–14.0% by Karl Fischer.” - “Identification: zinc reaction, acetate reaction and IR against a named reference.” - “≥95% through 80 mesh; granulated on request; heavy metals and microbiology as catalog.” - “No substitution with zinc sulfate, zinc oxide or another zinc salt without written change control.” A specification that says only “zinc” has described neither the salt nor the hydrate. The product hub carries the catalog line; the acetate versus sulfate page works through the pH and label consequences; the COA page shows how the figures are reported. ## What changes when you switch, and when not to A salt switch is a change control, not a substitution. It moves the fill weight, the pH of the matrix, the taste, the stability file and the label, and it needs a new specification, a matrix trial at the real process conditions and a new artwork proof. A capsule qualified on the sulfate cannot be filled with acetate at the same weight: the zinc dose would rise by about 30%. The switch is justified when the current salt is the constraint: a pH-sensitive matrix that cannot take the sulfate acidity, a capsule that cannot hold the sulfate mass, or a taste trial that favours the acetate. It is not justified by one quotation or a higher zinc figure. If the current salt works, the label is approved and the file is complete, the burden sits on the change. The zinc sulfate product page presents the acidic salt from its own side; the stability page covers the acetate powder and solution; the analytical methods library explains the zinc titration; the quality page describes the release file. ### 02.1 Zinc acetate vs zinc sulfate: pH, counter-ion and the label URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-acetate/grades/zinc-acetate-vs-zinc-sulfate/ Reviewed: 2026-11-20 Zinc acetate dihydrate and zinc sulfate heptahydrate deliver the same element from different salts. The acetate carries 29.8% zinc and gives a 5% solution at about pH 6–8; the sulfate carries 22.7% zinc and gives a 5% solution at about pH 4.4–5.6. The difference shows up in the fill weight, the taste and the label name before it shows up in the assay. In one lineZinc acetate and zinc sulfate deliver the same element from different salts: the acetate is near-neutral and carries 29.8% zinc, the sulfate is acidic and carries 22.7%. ## The two salts at a glance The formulas are not interchangeable. Zinc acetate dihydrate is C4H6O4Zn·2H2O, CAS 5970-45-6, at about 219.50 g/mol; zinc sulfate heptahydrate is ZnSO4·7H2O, CAS 7446-20-0, at about 287.55 g/mol. The acetate carries a larger organic anion and less water; the sulfate carries a divalent inorganic anion and much more water. Zinc acetate dihydrate against zinc sulfate heptahydrate | Property | Zinc acetate dihydrate | Zinc sulfate heptahydrate | CAS number | 5970-45-6 | 7446-20-0 | Formula | C4H6O4Zn·2H2O | ZnSO4·7H2O | Molar mass | 219.50 g/mol | 287.55 g/mol | Zinc, theoretical | 29.8% | 22.7% | Water, theoretical | 16.4% | 43.9% | Counter-ion share | Acetate, 53.8% | Sulfate, 33.4% | pH of a 5% solution | About 6.0–8.0 | About 4.4–5.6 | Catalog zinc range | 29.0–32.0% | 22.0–23.0% The catalog ranges describe the commercial hydrate: the acetate's 29.0–32.0% zinc and 10.0–14.0% water are a partially dried dihydrate; the sulfate's 22.0–23.0% zinc and 43.0–46.0% water are a heptahydrate. ## pH: the acetate is the gentler solution The pH difference is the first practical split. Acetate is the conjugate base of acetic acid, a weak acid with a pKa near 4.76, so a zinc acetate solution has some buffering capacity and a 5% solution sits near neutral at about pH 6–8. Sulfate is the conjugate base of a strong acid, so a zinc sulfate solution has little buffering there and sits at about pH 4.4–5.6. That difference matters in four places. Taste: the sulfate reads more acidic and astringent at the same zinc concentration. Materials: an acidic sulfate solution is harder on mild steel than a near-neutral acetate solution. Formulation: an acidic salt can react with carbonate or bicarbonate and release carbon dioxide. Actives: a pH-sensitive ingredient may tolerate the acetate matrix and not the sulfate one. Measure the pH at the use concentration, because it moves with concentration and with the rest of the formula. If the matrix is pH-sensitive, write a pH range for the 5% solution into the specification. ## The counter-ion is most of the mass The label declares zinc, but most of the powder is the counter-ion and the water. In the acetate, acetate is 53.8% of the dihydrate mass and water is 16.4%; in the sulfate, sulfate is 33.4% and water is 43.9%. At the same elemental zinc dose, the acetate therefore needs less total salt: about 33.6 mg of zinc acetate dihydrate for 10 mg of zinc, against about 44.0 mg of zinc sulfate heptahydrate. At 50 mg the weights are 167.8 mg and 219.9 mg. The counter-ion is not an impurity or a filler. It is the other half of the salt and part of the ingredient name. Acetate is a weak-acid anion and a buffer; sulfate is divalent and strongly acidic. Comparing the two on the zinc figure alone ignores the mass, the pH and the label. The acetate load is a formulation fact: two acetate ions accompany each zinc ion, and the amount per serving follows from the zinc dose. It is declared through the ingredient name, not as a separate additive. ## Dose arithmetic and the fill weight The label claim is elemental zinc, so the weigh-up divides by the zinc figure on the certificate. The table uses the theoretical figures to show the size of the difference; at the balance, use the lot result. Salt mass needed for a zinc claim · theoretical figures | Elemental zinc | Zinc acetate dihydrate | Zinc sulfate heptahydrate | 10 mg | 33.6 mg | 44.0 mg | 15 mg | 50.3 mg | 66.0 mg | 50 mg | 167.8 mg | 219.9 mg The fill weight follows. A capsule that holds 33.6 mg of acetate may not hold 44.0 mg of sulfate plus excipients, and a tablet built on the sulfate needs more compression mass. A stick pack or a clear drink takes the acetate because it dissolves without a dispersion. The reverse error is serious: keeping the sulfate fill weight and switching to acetate delivers about 30% more zinc without changing the label. Use the certificate's zinc result, not the theoretical 29.8% or 22.7%. A lot at 31.0% zinc needs 32.3 mg of acetate for a 10 mg claim; a lot at 22.5% zinc needs 44.4 mg of sulfate. ## What the label has to say The salt name is part of the ingredient declaration. In the EU, the ingredient list uses “zinc acetate” or “zinc sulfate”, and the nutrition declaration gives the zinc mass and the percentage of the 10 mg reference value. Both salts appear in Annex II to Directive 2002/46/EC as permitted zinc sources for food supplements, as of this review. In the United States, the Supplement Facts panel declares “Zinc (as zinc acetate)” or “Zinc (as zinc sulfate)” in elemental zinc, with the percentage of the 11 mg daily value. A label written for one salt is not a label for the other: the ingredient name, the fill weight and the matrix pH all change. The zinc dose is checked against the upper limit: 40 mg per day for adults in the United States and 25 mg per day in the EU re-evaluation, as of this review, with lower values for younger age groups. Claims are a separate review. The EU register sets the authorised zinc wording and its conditions; in the United States, a structure/function statement needs the disclaimer and must not be a disease claim. This site publishes the specification and makes no health claim. ## When to choose which Choose the acetate when the matrix needs a near-neutral solution, when the sulfate acidity would attack a carbonate, a pH-sensitive active or a mild-steel line, or when the fill weight is tight and the extra zinc per gram matters. The acetate is also the easier starting point for a lozenge or a chew, where the taste and the pH are part of the product. Choose the sulfate when the label and the market file already name it, when the formula runs acidic anyway, or when the existing stability data are built around the heptahydrate. Both salts are freely soluble, so pH, counter-ion, mass and label decide the question. A switch in either direction is a change control: a new specification, a matrix trial at the real pH and process temperature, a new stability file and a new label proof. The zinc acetate product hub carries the acetate specification; the zinc sulfate product page carries the sulfate line; the grades page places this comparison in the wider salt range; the compliance page covers the market files; the analytical methods library explains the zinc titration; the quality page describes the release workflow. ### 03 Zinc acetate stability: water, caking and the pack URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-acetate/stability/ Reviewed: 2026-11-20 Zinc acetate dihydrate is chemically stable in the dry state; the changes that matter are physical and gravimetric. It takes up moisture in a humid store and can lose crystal water in a dry one, so the water result, the zinc per gram and the flow move before the assay does. In solution the salt is freely soluble and close to neutral, which makes microbial control and the matrix pH the main risks. In one lineZinc acetate does not degrade on the shelf; it exchanges water with the room, and the pack decides whether the dihydrate, the zinc figure and the flow stay where the specification put them. ## The powder: water in both directions The catalog sets water at 10.0–14.0% by Karl Fischer. The full dihydrate is about 16.4% water by calculation, so the catalog range describes a dihydrate that has already lost part of its crystal water. That explains why the zinc range reaches 32.0%: as water leaves, the zinc per gram rises. A lot at 29.0% is closer to the full hydrate; a lot at 32.0% is drier. In humid air the movement reverses. The powder takes up surface moisture, becomes sticky and then cakes, and the water result climbs toward the top of the range. In a dry store it can lose more crystal water, and the zinc per gram rises further. The 80 mesh powder has a high surface area, so a small change in the room shows up quickly in an open pouch. The pack is the control: keep the foil pouch or the drum liner closed, reseal after sampling, and let a cold pack reach room temperature before opening so condensation does not form on the powder. A faint acetic note is normal; a sharp one can indicate free acid or moisture. Colour is a weak signal: a yellow or brown tint points to iron, not to a hydration change. ## The solution: near-neutral, buffered and microbially vulnerable Zinc acetate dissolves freely and gives a clear, colourless solution. A 5% solution sits at about pH 6–8, and the acetate buffers the system near its pKa. That is a different starting point from zinc sulfate, whose 5% solution is closer to pH 4.4–5.6. The gentler pH is useful in a drink or a lozenge, but it also means the solution is a comfortable environment for microorganisms. Zinc is a nutrient, not a preservative. A dilute hold that contains sugar, protein or a flavour system will support growth, so a liquid process needs a validated hold time, a pH and temperature control, and a microbiology check. The acetate can also shift the pH as the solution is heated or concentrated; measure the pH at the use concentration, not only on a 5% lab sample. Wetted materials should be checked for the duty: acetate is less aggressive than sulfate, but a zinc salt solution is still not water. Light and oxygen are minor factors for this salt; pH, heat, hold time and microbial load decide the solution's life. ## What drives the change Factors that move zinc acetate dihydrate during storage | Factor | What it does | Control | High humidity | Surface moisture; caking; water result rises | Sealed liner; controlled store; desiccant where needed | Low humidity | Crystal water lost; zinc per gram rises | Sealed pack; avoid a desiccated store | Temperature cycling | Condensation at the liner; caking at the surface | Stable store; equilibrate before opening | Compression | Caking in drums and tablet presses | Controlled load; granulated grade where flow matters | Microbiology in solution | Growth in a dilute, nutrient-containing hold | Validated hold time; hygiene; testing | Matrix pH | Shifts taste, clarity and stability | Measure at use concentration; buffer if needed The factors are not independent: a warm, humid store with a scoop left in the drum combines moisture, compression and a contact surface. The useful question is not whether zinc acetate is stable, but which pack, condition and test panel define the stability claim. ## A stability protocol for powder and solution Fix the pack, the condition, the time points and the tests. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% relative humidity cover the warehouse; 40 °C/75% relative humidity is the accelerated arm that stresses the pack. Add a low-humidity arm at 25 °C/30% relative humidity, because water loss is a failure mode that a humid cabinet misses. Test assay, zinc, water, appearance, pH of a 5% solution, particle size and microbiology at each point. Weigh the pouch or drum at each interval: a net-weight change is the earliest signal that the pack is exchanging water with the room. For a capsule or tablet, test the finished unit too, because the shell and the excipients change the moisture equilibrium. For a stick pack, inspect the seal as well as the powder; a pinhole is enough to let moisture in. Show individual results, not only a pass statement, and name the pack and lot family. A 1 kg pouch and a 25 kg drum differ in headspace, so one pack's data cannot vouch for the other. ## The finished formula changes the answer A capsule or tablet starts at low water activity, but the shell, the excipients and the filling room still move moisture. The acetate is hygroscopic, so the blend can pick up water during compression and the capsule can become brittle or the tablet can soften. Check the water result of the blend as well as the salt, and test the finished unit at release and after storage. A stick pack fails at the seal if the powder pulls moisture through a pinhole; the strip is inspected as well as the powder. A lozenge or a chew uses the acetate's near-neutral solution and mild taste, but the sugar and acid system sets the water activity and the microbial risk. A beverage combines pH, heat, oxygen and microbial load, and the acetate buffer can mask a pH shift until the flavour already moved. The formulator decides whether an overage is needed; that is a label decision. It does not repair a pack that lets moisture in or make a bulk result apply to a beverage. ## How the retest period is assigned There is no single shelf-life number for zinc acetate dihydrate: the pack and the storage condition set it. The retest period is written into the specification and supported by data for the exact pack; without those, a number is an assertion. At the end of the retest period, re-assay the retained sample before extending use. Recheck water as well as zinc: a lot can pass the assay and still have lost crystal water, which changes the zinc per gram and the fill weight. Never extend a retest date by assumption, and never transfer a bulk result to a repacked container. The product hub lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the analytical methods library describes the water and titration methods; the quality page describes the release and retest workflow. ### 04 Zinc acetate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-acetate/moq/ Reviewed: 2026-11-20 The MOQ for zinc acetate dihydrate is 1 kg, supplied as a 1 kg foil pouch; the standard bulk pack is a 25 kg fiber drum, with granulated material on request. Lead time is 1–7 days for the standard pack. A firm quotation needs the salt and hydrate, the assay basis and zinc range, the quantity and pack, the destination and Incoterm, the documents and the intended market. In one lineThe 1 kg pouch is the trial unit because it can be sampled, tested and traced back to one lot, while the 25 kg drum supplies a production batch. ## Why the first pack is 1 kg A kilogram covers a bench trial, a retained sample and an independent identity test, and it travels as a parcel. The pouch has its own lot code, so the sample, the certificate and the trial result point back to one pack. Below 1 kg the material is normally split from a larger lot and repacked, which adds handling and breaks the original pack identity without changing the chemistry. The zinc figure makes the pack arithmetic worth doing. At 29.8% zinc, a 1 kg pouch contains about 298 g of elemental zinc; a 25 kg drum contains about 7.45 kg. The same drum of zinc sulfate heptahydrate at 22.7% zinc holds about 5.68 kg. The drum buys zinc, not only mass, and the difference is large enough to change how a production batch is planned. The minimum is set by the pack, not by a volume target. A drum cuts handling per kilogram of zinc but ties up inventory and storage, and the acetate is hygroscopic, so it needs a dry store. A project that needs 3 kg for a pilot should not buy a drum and leave the remainder in a humid room. ## Packs and formats Standard zinc acetate packs and formats | Pack or format | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal after opening; lot code on the pouch | Fiber drum | 25 kg | Production | Inner liner; keep the liner closed; lot code on drum and liner | Granulated powder | 1 kg or 25 kg | Tablets, sachets, blends | Particle profile and flow change; aids must be declared | Split below 1 kg | On request | Bench trial | A repack with its own record, not the catalog pouch The catalog form is an 80 mesh powder: ≥95% through 80 mesh. Granulation is a different particle-size line, not a packing choice; agree it before the quotation, because it can change the lead time and the declaration on the pack. The pack is not the place to discover that the powder will not flow on the customer's line. ## Lead time and dispatch From order confirmation, the standard pack is dispatched within 1–7 days. Picking, document preparation and dispatch sit inside that window; transit, customs clearance and the customer's quality release do not. A granulated lot, a non-standard pack or a split adds time, and the quotation should state it as a separate line. Ask when the lot will leave, not only how long the lead time is. The pouch usually moves as a parcel and the drum on a pallet; the Incoterm assigns freight booking and customs entry. The COA, specification and any market statement should travel with the lot rather than follow in a separate email. Zinc acetate does not need a cold chain, but it needs a dry one. A drum left on a wet dock or in a container that sweats can arrive caked even when the certificate was correct at dispatch. For a long sea leg, agree the liner and desiccant specification and inspect the drum on arrival. ## What a quotation needs Six details make a quotation comparable: - Product and hydrate. Zinc acetate dihydrate, CAS 5970-45-6, with the hydrate written out. - Specification. Assay and basis, zinc range, water range, mesh, heavy metals and microbiology. - Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated variant. - Destination and Incoterm. Country, delivery point and trade term. - Documents. COA, specification, SDS and any statement the importer needs. - Intended use and market. Supplement, food or another use, and the country of sale. A quotation that says only “zinc acetate” is incomplete: the hydrate, the mesh and the zinc range belong in the offer. The same words can describe a powder, a granulated grade or a repack, and the documents follow the pack. ## The sample is a lot, not a demonstration The 1 kg pouch is the qualification sample. Before scaling, test identity, assay, zinc, water and microbiology, and retain a sample from that same pouch. The sample, the certificate and the quotation must all show one lot code. A sample with no lot link only demonstrates; it does not qualify. A bench trial that needs less than a kilogram should be agreed before the order is placed. A split from a bulk lot becomes a repack, with its own traceability and its own record. A bench sample and a production drum need not share a lot, and a specification should not be built on an unreleased sample. ## Terms to settle before the first order The quotation covers the commercial terms, the Incoterm, pack size, lead time and documents. Change control, the retest period, the retained sample, a COA per lot and the specification revision form the quality schedule. Sign the quality agreement before the first production order, not during the first dispute. Returns and replacements are handled under the quality agreement and the quotation. A failed lot is settled on the retained sample and a joint re-test, not on a photograph. Agree who pays for the referee test and which laboratory both sides accept, and write it down before dispatch. The product hub carries the catalog specification; the COA page lists the release tests; the stability page covers storage and caking; the grades page compares the salts; the quality page describes the release file and the retest record. ### 05 The regulatory file for zinc acetate URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-acetate/compliance/ Reviewed: 2026-11-20 Zinc acetate is a zinc source, so the regulatory file is built around the permitted-source listing, the elemental zinc dose and the label. In the EU, zinc acetate appears in Annex II to Directive 2002/46/EC as a permitted zinc source for food supplements, as of this review; in the United States, the finished product sits under the dietary-supplement framework and the Supplement Facts panel declares the elemental zinc. The buyer's regulatory team confirms the route. In one lineThe specification describes the salt; the regulatory file shows the permitted source, the zinc dose and the label for the destination. ## What the file has to answer A complete file settles four points. What exactly is being bought, and which specification revision applies? Which lot does the certificate cover, and what did it measure? Which route, limits and label rules govern the finished product where it will be sold? What is the change-control route if the source, process or pack changes? The COA covers the lot, the TDS the specification and the SDS the handling; none establishes the route by itself. For a mineral salt the route question has two layers. The first is the substance: whether the destination list includes zinc acetate as a source of zinc for the intended category. The second is the finished product: the dose, the label, the claims and the contaminant calculation. Both layers belong in the file with version numbers, because an undated certificate and an undated specification cannot be compared. ## European Union In the EU, zinc acetate is listed in Annex II to Directive 2002/46/EC, the list of vitamin and mineral substances permitted in food supplements, as of this review. The buyer's regulatory team confirms that the entry and its conditions cover the finished product. General food law (Regulation (EC) No 178/2002), labelling (Regulation (EU) No 1169/2011) and the contaminant regulation (Regulation (EU) 2023/915) apply alongside the supplement directive. The nutrition declaration gives the zinc mass per portion and the percentage of the nutrient reference value, which is 10 mg per day for zinc in Annex XIII to Regulation (EU) No 1169/2011. The ingredient list names “zinc acetate” in the destination language. The contaminant file is a finished-product calculation: the maximum levels for lead, cadmium and mercury apply to the supplement as sold, and the daily dose has to stay inside them. The current text and any category exception are checked at the time of the order. Great Britain uses the GB register and GB labelling, while Northern Ireland follows the EU framework. The delivery address decides which applies, and the buyer records the decision with the order. ## United States In the United States, the finished product sits under the dietary-supplement framework, with its own labelling and GMP requirements. The Supplement Facts panel declares “Zinc (as zinc acetate)” in elemental zinc, with the percentage of the daily value; the daily value used on the panel is 11 mg for adults and children four years and older, as of this review. The brand confirms the ingredient's status and any notification for the intended use, because a certificate does not determine the route. Structure/function statements are reviewed by the brand and carry the required disclaimer; disease claims are not made. The label review is separate from the certificate, and a certificate does not approve a claim. The salt name on the panel is part of the ingredient declaration, so a panel written for zinc sulfate is not a label for the acetate. ## Contaminants and the zinc dose Contaminant limits apply to the finished product, so a drum result is only the input. Use the table as a checklist, then apply the current text and the daily dose. Contaminant references to convert to the finished product | Parameter | Typical supplement reference | What the file should show | Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method, limit and the finished-product calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception that applies | Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result and method | Arsenic (As) | Customer or market limit | The agreed limit and the method, stated on the certificate | Zinc dose | Destination upper limit for the age group | The elemental zinc per daily portion and the check against that limit Zinc has a tolerable upper intake level in some markets. In the United States the adult level is 40 mg per day from all sources, as of this review; the European Food Safety Authority set 25 mg per day for adults in its re-evaluation, with lower values for younger age groups. The figure is checked against the age group on the label; the salt weight is not the dose. ## Label wording and claims The label names the material, the elemental zinc mass and the source. In the EU, the ingredient list uses “zinc acetate”, and the nutrition declaration gives the zinc mass and the percentage of the 10 mg reference value. A nutrient claim such as “source of zinc” needs 15% of the reference value in the portion, which for a supplement is the daily dose; “high” needs 30%. At 10 mg, those thresholds are 1.5 mg and 3.0 mg of zinc. The brand's reviewer checks the current annex before the wording is used. Health claims are a separate file. The EU register of authorised claims sets the permitted wording and the conditions for zinc; the brand selects a wording that is on the register and keeps the evidence with the label. In the United States, a structure/function statement needs the disclaimer and must not be a disease claim. The acetate is part of the salt and is declared through the ingredient name, not as a separate additive. This site publishes the specification and makes no health claim. ## Documents that belong in the file - Specification with the dihydrate, CAS number, assay basis, zinc range and water range. - COA for the lot, with individual heavy-metal results and the microbiology panel. - Technical data sheet and safety data sheet. - Allergen and GMO statements, origin record and a packaging declaration. - Contaminant calculation for the finished product and the daily zinc dose. - Label artwork and claim review, with the destination and the date of the review. - A change-control record covering source, process and pack. Any missing statement should be named before the order rather than discovered at the port. Version numbers on the list are worth more than a folder of undated files. Catalog data is on the product hub; the COA page explains the lot certificate; the identity page covers the analytical evidence; the quality page describes the release file; the analytical methods library covers the test methods. ## Pre-order checklist - The specification revision, dihydrate and CAS number are stated. - The destination route and the finished-product category are confirmed by the buyer. - The elemental zinc per daily portion is checked against the destination's upper limit. - Contaminant figures are recalculated for the daily dose of the finished product. - Label, nutrition declaration and claim wording have had a destination review. - Source, process and pack sit under change control, and every document carries a version. ### 06 How to prove a zinc acetate lot is the dihydrate URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-acetate/identity/ Reviewed: 2026-11-20 A zinc acetate lot is the dihydrate when five lines agree: the document names the dihydrate and CAS 5970-45-6; complexometric titration gives 29.0–32.0% zinc; the acetate reaction and IR show the acetate ion; Karl Fischer gives 10.0–14.0% water; and the solid-state pattern matches the dihydrate reference. The assay alone cannot separate zinc acetate from zinc sulfate, zinc oxide or a dilution. In one lineIdentity is the zinc figure, the acetate figure and the water figure agreeing on the same dihydrate, with the solid-state pattern as the tie-breaker. ## Identity evidence, layer by layer A certificate can carry the right name and still not demonstrate it. Each layer below is a separate question with its own evidence, and an answer that stops at the first layer describes paperwork, not powder. Identity evidence for zinc acetate dihydrate | Layer | Question | Test | What it proves | Document | Is the hydrate and salt named? | Name, CAS number, formula | Paperwork only | Zinc | Is the zinc figure right? | Complexometric titration (EDTA) | The zinc content, not the salt | Acetate | Is the anion acetate? | Acetate reaction, IR, ion chromatography | The salt, and the 1:2 ratio | Water | Is it the dihydrate? | Karl Fischer | The hydration state | Solid state | Is the crystal the dihydrate? | FTIR, and XRD for a dispute | The hydrate as a solid The catalog identity is “zinc and acetate conform”. That is a reasonable release gate, but it does not report the water or the acetate as numbers. When the salt is disputed, ask for the Karl Fischer result, the acetate result and the diffraction pattern; a conformity statement is not a measurement. ## The zinc, acetate and water ratio The formula fixes the mass balance. In 100 g of pure C4H6O4Zn·2H2O there are 29.8 g of zinc, 53.8 g of acetate and 16.4 g of water. The zinc-to-acetate mass ratio is 29.8 ÷ 53.8 = 0.554, and the molar ratio is 1:2. The zinc figure and the assay expressed as the dihydrate are related by 219.50 ÷ 65.38 = 3.357, so 30.0% zinc is about 100.7% of the dihydrate formula. The catalog ranges sit on that balance. Zinc 29.0–32.0% with water 10.0–14.0% describes a dihydrate that has lost part of its crystal water: at 12% water the zinc works out near 31.3%, and at 10% it is near 32.1%. A lot with 29.0% zinc and 14.0% water is closer to the full hydrate. Neither is a purity failure; the pair has to be read together. A blend is caught by the same ratio. A powder made from zinc acetate and zinc sulfate can be formulated to land inside the zinc range, but the sulfate test turns positive and the acetate result falls below the 1:2 ratio. A blend with zinc oxide raises the zinc figure and leaves an insoluble residue; a dilution lowers both zinc and acetate and raises the water. The assay sees the zinc; the acetate and water see the rest of the salt. ## FTIR and XRD: the solid-state check FTIR is the routine identity test because it sees the acetate carboxylate bands and the water bands in one spectrum. It can separate the acetate from the sulfate, the gluconate and the citrate when the spectrum is compared with a named reference. The release identity should name the reference material and the band region used, not only the word “conforms”. X-ray diffraction answers the hydrate question more directly. Zinc acetate dihydrate, the anhydrous salt and zinc sulfate heptahydrate have different unit cells, so their peak positions differ, and a mixture shows both sets of peaks. XRD is not a purity assay and it does not measure the water content, but it is the strongest evidence that the crystal in the drum is the hydrate named on the certificate. Ask for the reference pattern and a stated detection limit before reading a “match” statement. ## What substitution looks like Substitutions and the signals on a zinc acetate certificate | Substitution | What it changes | Signal | Test | Zinc sulfate | Sulfate present; lower pH; acetate absent | Positive sulfate test; pH 4.4–5.6; acetate low | Ion chromatography, pH, FTIR | Zinc oxide | Insoluble zinc; acetate low | Residue in water; zinc high; acetate low | Solubility, assay, XRD | Zinc gluconate or citrate | Different anion; different IR | Acetate absent; different spectrum | Acetate test, FTIR, ion chromatography | Dilution | Zinc and acetate down; water up | Mass balance short; assay low | Mass balance, Karl Fischer | Surface moisture | Water up; zinc per gram down | Water above 14.0%; caking | Karl Fischer, sieve | Technical grade | Heavy metals up | Pb, Cd or As above the agreed limit | ICP-MS Appearance and odour are weak signals. A white powder can be the acetate, the sulfate or an oxide; a faint acetic note is consistent with the acetate but is not a measurement. The stronger signals are the acetate test, the sulfate test, the zinc figure and the mass balance. A certificate that reports appearance and assay but not the anion has left the most likely substitution untested. ## Identity lines for the specification - “Zinc acetate dihydrate, C4H6O4Zn·2H2O, CAS 5970-45-6.” - “Assay 99.0–101.0% by complexometric titration; state the basis.” - “Zinc 29.0–32.0%; water 10.0–14.0% by Karl Fischer.” - “Identification: zinc reaction, acetate reaction and IR against a named reference.” - “Sulfate by ion chromatography: report the result where the salt is disputed.” - “≥95% through 80 mesh; heavy metals and microbiology as catalog.” - “No substitution with another zinc salt or oxide without written change control.” ## Five questions before approval - Which hydrate and CAS number are on the certificate? - What are the zinc, water and acetate results, and which methods produced them? - What does the IR spectrum show, and is the sulfate test negative? - Can you provide the XRD pattern and the reference used for the dihydrate? - Would you agree to a joint re-test of the retained sample if the lot is challenged? Five direct answers amount to an identity file; a single assay percentage does not. The product hub carries the catalog specification; the COA page shows where each figure sits; the grades page compares the salts; the acetate versus sulfate page covers the label consequences; the analytical methods library explains the tests. ### 01 What the COA for beta-glucanase actually contains URL: https://nutrition.rainwoodbio.com/products/enzymes/beta-glucanase/coa/ Reviewed: 2026-11-20 The certificate for a beta-glucanase lot reports appearance, activity in U/g on a glucan substrate, identification by the activity assay, loss on drying, particle size, the heavy-metal panel and microbiology. The activity row describes the enzyme, and it means little unless the certificate sets the unit definition, the substrate, the assay pH and the temperature beside it. The values below are the catalog specification; the batch COA confirms a particular pack. In one lineA beta-glucanase figure is a rate on a named glucan substrate, so the certificate has to carry the unit definition, the substrate and the assay conditions beside the U/g. ## Reading the certificate line by line A certificate can be audited line by line only when each row carries what was measured, the method and the release limit. For an enzyme the activity row needs a fourth element, the assay conditions, because the same powder reads differently when the substrate or pH changes. Release specification · beta-glucanase powder | Parameter | Method | Release limit | Appearance | Visual | Off-white to light tan, free-flowing powder | Beta-glucanase activity | Reducing-sugar assay on a beta-glucan substrate, U/g | ≥50,000 U/g | Identification | Activity assay | Conforms | Loss on drying | Gravimetric | ≤8.0% | Particle size | Sieve analysis | ≥95% through 80 mesh | Heavy metals | ICP-MS or AAS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count; absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent The catalog identification line is the activity assay, not a spectrum. That is normal for an enzyme: a rate can come from the named enzyme, another glucanase, or reducing sugar already in the powder. ## What the U/g figure measures A unit of beta-glucanase is a rate, not a weight. The method defines it: one unit is the amount of enzyme that releases a set quantity of reducing sugar, usually one micromole of glucose equivalents per minute, from a named beta-glucan under a stated pH and temperature. Published feed-enzyme methods have used barley beta-glucan at pH 5.0 and 30 °C; house methods in the food trade may run at 40 °C or 50 °C. The certificate has to say which one it followed. The substrate decides what is counted. Barley beta-glucan is a mixed-linkage chain with both 1,3 and 1,4 bonds. Carboxymethyl cellulose is a different substrate with a different linkage pattern, so a CU/g figure from a cellulase assay is not a beta-glucanase result. A preparation can carry side activity on both substrates, and the declared unit captures only the assay performed. What the activity line must state | Field | Required detail | What shifts the number | Substrate | The beta-glucan used, such as barley beta-glucan or lichenin | Linkage pattern and solubility change the rate | Unit | U per gram of powder as sold | A protein basis gives a different number | pH | The buffer pH of the assay | Activity is pH-dependent | Temperature | The incubation temperature | Rate rises with heat until the protein unfolds | Detection | Reducing sugar by DNS or another stated method | Different end points give different scales The figure is per gram of powder as sold, not on a dry basis: moisture dilutes the preparation and the U/g falls with it. A dry-solids correction is a blend calculation, not a second assay basis. ## The limit and the measured result Activity is a one-sided limit. A lot at 52,000 U/g and one at 78,000 U/g both pass ≥50,000 U/g, and the result tells a formulator how much headroom the powder carries into a process that will consume part of it. The result column should hold a measured figure, the method reference and the release date. A result column that repeats the range is not a measurement, and "conforms" should be a conclusion the reader can draw from the figures. Activity also falls in storage, so the certificate should state the storage condition assumed and the activity guaranteed at the end of the declared shelf life. A drum received six months after release is bought at the lower figure. The stability page sets out how the pack and the process change that number. ## What varies from lot to lot Fermentation sets the starting point: the production strain, the medium and the harvest shift the balance of enzymes in the broth. Recovery and concentration decide how much of that balance reaches the powder, and standardisation with a carrier sets the final activity per gram. Lot-to-lot spread is therefore a process decision as much as a biological one. Drying and milling move the moisture, the colour and the particle size. The 80 mesh specification is fine enough that the powder wets quickly and also fine enough to pick up water from the air; a wetter powder reads lower per gram at constant enzyme protein, and a milling step that generates heat can destroy activity before the sieve is reached. Colour is the vaguest line on the sheet and sometimes the most informative: a darker tan can follow a hotter dry while the assay still passes. Watch the method as closely as the number: a change of substrate lot, buffer, pH or incubation time makes two U/g results incomparable, even when both pass the same limit. ## When to send a sample out An independent test is worth ordering for a new source, a first regulated shipment, a specification that rests on the activity figure, or a dispute. The panel is narrow: activity by the buyer's own method on a retained sample, protein, loss on drying, heavy metals by ICP-MS, microbiology and a protein pattern by gel electrophoresis. Add one assay that the certificate does not carry: activity on carboxymethyl cellulose, run beside the beta-glucan assay. The pair shows whether the preparation behaves like a beta-glucanase or like a cellulase with side activity. Ask the referee to run the same substrate, pH and temperature as the specification, or the comparison measures methods rather than powder. Ask for the detection limit on each metal; a "not detected" line without a limit describes the method, not the sample. Keep the sample tested and the retained sample on the same lot code; a contested result needs a test that separates the preparations, not a repeat of the same assay. ## How to compare two suppliers Compare six lines: enzyme name, EC and CAS numbers; the unit definition with substrate, pH and temperature; the activity result and its basis; protein and specific activity; loss on drying and particle size; and the source strain, carrier and lot code. If two offers match on 50,000 U/g but not on the other five, they are different preparations. Traceability is the second layer: the certificate should name the manufacturer, the organism and strain, and the carrier and mesh. The catalog specification sits on the beta-glucanase product page; the tests that separate a genuine lot from a diluted or substituted one are on the identity page; the unit definitions are compared on the beta-glucanase vs cellulase page; the assay vocabulary is in the assay glossary entry; and the release sequence is described on the quality page. ### 02 One activity, one mesh: choosing a beta-glucanase grade URL: https://nutrition.rainwoodbio.com/products/enzymes/beta-glucanase/grades/ Reviewed: 2026-11-20 The catalog beta-glucanase is an 80 mesh powder at ≥50,000 U/g, with a granulated form on request. The range does not carry a ladder of standard activities, so the grade question is which assay defines the unit, whether the declared figure is the release value or the end-of-shelf-life value, and whether the powder or the granule fits the plant. The activity number alone does not answer it. In one lineChoosing a beta-glucanase grade is choosing the assay that defines the unit and the form that carries it, not only the activity figure. ## Why an enzyme grade is not a purity grade An enzyme preparation is not described by a purity percentage. It contains the active enzyme, leftover fermentation solids and whatever carrier was used to set the final activity. The description that matters is therefore the declared activity, the method behind it, the source and the physical form. Two powders can both say 50,000 U/g and behave differently in the same blend. Beta-glucanase adds a particular trap: the unit name is not unique to one substrate. A U/g figure on barley beta-glucan and a U/g figure on lichenin or carboxymethyl cellulose are different measurements, and the grade is not defined until the method is. The lines that define a beta-glucanase grade | Grade line | What it sets | Where it matters | Activity (U/g) | Units delivered per gram | Dose weight, label statement, overage | Unit definition | Which assay produced the number | Comparability with another supplier | Carrier | What the activity sits on | Ingredient declaration, water content, flow | Particle size | How fast the powder wets and how much dust it makes | Blend uniformity, dust control | Form | Powder or granule | Dissolution rate, handling | Production organism | Species and strain behind the lot | Identity dossier, market file | Declared basis | Release activity or activity promised at shelf-life end | Label claim and specification headroom ## The catalog forms side by side The catalog lists one activity grade in two forms: an 80 mesh powder and a granulated form on request. A different activity is a separate specification rather than a catalog grade, and it should be quoted as its own document with its own certificate. Beta-glucanase forms compared | Option | Activity | Form | What changes | Standard powder | ≥50,000 U/g | 80 mesh powder | Fast wetting, highest dust, smallest dose weight | Granulated | Set in the specification | Granules | Less dust, slower wetting, activity lost in granulation | Other activity (separate specification) | Set in that specification | Agreed | New certificate, new dose weight, new carrier load Granulation is not a dilution. It binds the same powder into larger particles, so the activity per gram can stay close to the powder, but the binding step itself costs activity, and the figure after granulation belongs in the specification. A change of activity is a different material: the units per gram, the mass per batch and the carrier entering the formula all move. ## 80 mesh, dust and dissolution The catalog particle size is ≥95% through 80 mesh, which is finer than the 40 mesh common for cellulase. The finer powder wets and disperses faster, and it also makes more dust. Enzyme powders are respiratory sensitisers, so the SDS, local exhaust ventilation, closed transfer and a suitable mask belong in the handling plan, not in a footnote. Granulation buys dust control with a slower dissolve. A drink mix that must disperse quickly usually takes powder; a plant handling kilos of enzyme a day may choose granules to keep dust out of the air. Particle size is a specification line, not a packing choice: a coarser powder is a different mesh and a different document. ## The arithmetic behind the dose Units are mass multiplied by activity. One kilogram at 50,000 U/g carries 50 million U. A blend built for 2 million U takes 40 g of that powder; the same 2 million U from a 10,000 U/g preparation would take 200 g, and the extra 160 g is carrier. The arithmetic is exact, and the unit is not convertible to CU/g. Weighability usually settles the choice. A 40 g charge is routine in production and awkward in a pilot; a dilution makes the units weighable while adding carrier to the label and the moisture budget. State the basis as well: the activity at release, or the activity promised when the shelf life ends. Those are different promises; a label that leaves the choice unstated is ambiguous. ## Writing the grade specification Six lines make the grade testable: enzyme name, EC 3.2.1.6 and CAS 9025-70-1; activity ≥50,000 U/g with the method reference; substrate, pH and temperature; protein or specific activity; loss on drying ≤8.0% and ≥95% through 80 mesh; and the source strain, carrier and form. Add the declared basis and the storage statement. Write the activity as "not less than" and keep the method under change control, because a change of substrate or conditions leaves two U/g results that cannot be compared. The catalog figures sit on the beta-glucanase product page; the certificate lines are read on the COA page; the stability of each form is on the stability page; the unit comparison with cellulase is on the beta-glucanase vs cellulase page; and the assay vocabulary is in the assay glossary entry. ## When the granule or the finer mesh is the wrong choice A granule is wrong when the product must disperse in seconds, because the granule wets more slowly and can leave a lump in a cold drink mix. A finer powder is wrong when dust control is the constraint, because the same surface area that speeds wetting also puts more enzyme into the air. A lower-activity dilution is wrong when the carrier load already sits at its limit or when the moisture budget is tight. None of those arguments changes the assay. The unit stays the same, the substrate stays the same and the certificate has to carry both. The form changes; the identity does not. ### 03 Beta-glucanase activity falls with heat and moisture; the process sets the shelf life URL: https://nutrition.rainwoodbio.com/products/enzymes/beta-glucanase/stability/ Reviewed: 2026-11-20 Dry beta-glucanase powder loses activity slowly in a sealed pack, and the loss accelerates with moisture, heat and time. A wet process step can remove more activity in an hour than months of storage, and the 80 mesh powder picks up moisture quickly once the pack is open. Shelf life is assigned from data for the exact pack and matrix, not from the certificate. In one lineA sealed pack holds the activity; moisture, heat and the wet step of the process decide how much is left at the end of shelf life. ## The powder: moisture, heat and the seal At low water activity the enzyme is close to inert. With little water present, the protein is immobile and the reactions that destroy it are slow. A sealed foil pouch or a lined fiber drum at room temperature therefore keeps the declared activity for a long time, and month-to-month loss is small next to what one wet process step can remove. The catalog sets loss on drying at ≤8.0%. That is a release limit, not an allowance for storage. An opened pouch takes water from the room air, and the 80 mesh powder has enough surface area to do it quickly. Keep the pack closed until the batch is ready, reseal it properly between weighings, and let a cold-stored pack reach room temperature before opening, so water does not condense on the powder. Heat raises the rate of both moisture damage and protein unfolding. A sealed pack in a normal warehouse is usually acceptable; a hot loading bay, a parked car or a glasshouse is not. The certificate should name that condition. ## In solution the clock runs faster Dissolved, the enzyme becomes a protein in water, its native structure exposed, and activity can fall fast enough to become a process problem rather than a storage footnote. Temperature, pH and hold time govern the rate. A solution kept warm for a shift can lose a noticeable share of its activity before the filling line is reached. Beta-glucanase is used in process streams such as brewing and wine filtration, where it works for a defined hold rather than for a shelf life. The useful question is how much activity remains at the end of that hold, at the process pH and temperature. Pasteurisation and hot fill are the hard cases. A heat step of minutes at 70–90 °C can strip much of the activity, and cooling does not bring it back. If the process needs that heat, dose for the far side of it and measure the activity after the step. ## What drives the loss What shortens beta-glucanase activity, and the control for each route | Factor | What happens | Control | Heat above the working window | The protein unfolds; the loss is irreversible | Dose after the heat step, or add an overage | Moisture in the powder | Water restores mobility; hydrolysis and oxidation resume | Sealed pouch; reseal; desiccant where needed | pH away from the assay window | The structure changes and the rate falls | Check the matrix pH; buffer the wet blend | Wet granulation | Water, binder and drying heat together | Low-water binder; brief cool dry | Tablet compression | Local heat and shear at the punch | Direct compression; measure activity in the tablet | Trace metals | Iron and copper speed up protein oxidation | Check the mineral sources; test the blend | Opening the pack | Humid air enters the headspace | Reseal; use small packs for samples The factors are not independent: a warm, humid store or a wet blend at the wrong pH combines them. The question is not whether beta-glucanase is stable, but in which pack, at which condition and for how long. ## Designing the stability study Three production lots, one assay method, and time points at 0, 3, 6, 9, 12 and 24 months at 25 °C/60% relative humidity. Add a second condition at 30 °C/65% relative humidity, or 30 °C/75% for a tropical market, plus an accelerated arm at 40 °C/75% for six months. Test activity, loss on drying, appearance and microbiology at every point. Run the study on the material the customer receives, in the pack the customer receives: a concentrate in a laboratory jar says little about a granulated grade in a foil pouch. Where a process step is planned, test the blend before and after it so the loss from processing is measured, not guessed. Report the result as a percentage of the initial activity as well as the absolute figure. A lot that starts at 60,000 U/g and ends at 51,000 U/g has lost 15%, and the absolute figure alone hides whether the fall came from the powder or from where it started. The methods library describes the assay formats behind those figures. ## The formula changes the answer A capsule or tablet begins with low water activity, but the shell and excipients can still pass moisture into the fill, so activity and loss on drying are checked at release and again after storage. A stick pack fails at a seam: one pinhole in the laminate lets water in, so the strip is checked as well as the powder. Neither format can borrow the bulk pouch's shelf life. A beverage combines pH, heat and oxygen. An acidic fruit powder drops the local pH as soon as water appears, and ascorbic acid with a trace of iron or copper produces oxidants that damage the protein. Direct compression and dry blending are gentler because no water is added and no drying heat is applied. If granules are needed, keep the binder low in water and the dry short and cool, then measure the activity of the granule rather than calculating it from the powder. Packaging completes the picture: a foil laminate with a sound seal, a desiccant where humidity demands one, and little headspace all slow the loss. A stick pack is not a drum; its surface area per gram is much larger. ## How the shelf life is assigned Beta-glucanase has no single shelf-life figure, because the pack and the storage condition decide it. The retest period is written into the specification and backed by stability data for that pack. A shelf-life figure without a pack, a storage condition and a test panel is only an assertion. One lot is not a shelf life. Three lots show the batch-to-batch spread; one lot may simply be a good one. If the label claims “not less than 50,000 U/g at end of shelf life”, the release specification needs headroom above that figure to cover the loss and the spread, and the stability data determines how much. Past the retest date, assay the retained sample again before extending use. The catalog figures are on the beta-glucanase product page; the release tests are on the COA page; the packs and lead time are on the MOQ page; the process trial is scoped on the custom processing page; and the release sequence is described on the quality page. ### 04 Beta-glucanase: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/enzymes/beta-glucanase/moq/ Reviewed: 2026-11-20 The catalog minimum is 1 kg, packed as a single 1 kg foil pouch; the bulk option is a 25 kg fiber drum. The standard 80 mesh powder has a 1–7 day lead time. A firm quotation needs the enzyme name and EC number, the activity with its unit definition and basis, the quantity and pack, the destination and Incoterm, the documents and the intended use. In one lineThe 1 kg foil pouch is the smallest sealed pack, and at 50,000 U/g it already carries fifty million units. ## Why the smallest order is 1 kg At 50,000 U/g, one kilogram carries fifty million units. A blend that uses tens of grams per batch will run for a long time on one pouch, so the minimum is a stock quantity rather than a trial size. The constraint is the pack: the powder has to be sealed in a moisture barrier, and a 1 kg foil pouch is the smallest unit that seals well and can carry a lot code. Below 1 kg, material is normally taken from a larger lot and repacked, which adds handling, breaks the original pack identity and weakens traceability without changing the chemistry. The bulk unit is a 25 kg fiber drum: it reduces handling per kilogram but commits inventory and a longer storage period. An order of 30 kg is one drum and five pouches, not a bespoke pack. ## Packs and their barrier Standard beta-glucanase packs | Pack | Fill | Where it fits | Care | Foil pouch | 1 kg | Trials, samples, small batches | Foil laminate; close tightly after use | Fiber drum | 25 kg | Bulk runs | Liner inside; one lot code across drum and liner | Sample | — | Qualification | Sealed pouch from the shipping lot The pack decides stability before it becomes a logistics question. The 80 mesh powder is fine and dusty, so the pouch and the drum liner protect the activity from filling to the customer's weigh booth. Open a drum under dust control, reseal the liner between uses, and keep the pack dry. A drum left open in a humid room will pick up water, and the activity confirmed at release is no longer the activity in the drum. ## Lead time and the lot documents The standard powder carries a 1–7 day lead time after the order is confirmed, subject to stock at the time. A granulated form is a manufacturing step, so the clock starts after the specification is agreed rather than after the purchase order. Ask for the dispatch date, not only the range: a 1 kg pouch normally travels as a parcel; the 25 kg drum goes on a pallet, and the Incoterm sets who books freight and who clears customs. Each shipment carries the lot documents: the batch COA with the activity result, the SDS, the specification sheet and the statements the destination market requires. Papers and goods should move under one lot code, because a certificate for another lot does not cover the delivery. ## What a firm quote has to ask The six details a firm quote needs | Fact | Why it changes the offer | Enzyme and EC number | Beta-glucanase EC 3.2.1.6, not a generic glucanase | Activity and unit definition | U/g on a beta-glucan substrate is not CU/g on CMC | Quantity and pack | Pouches, drums or a split shipment | Form | 80 mesh powder or granulated | Destination and documents | EU, US or UK file; feed or food route | Intended use and delivery point | Application, Incoterm, shelf life needed at arrival State the activity with its unit, and say whether it is the release figure or the figure promised at shelf-life end. “Beta-glucanase 50,000” with no unit is the usual reason a quote must be reissued: on an enzyme, the unit is the specification. ## The sample carries a lot code The 1 kg pack is the qualification unit. Test activity by the buyer's own method, then loss on drying, mesh and behaviour in the blend. A sample tested only against its own certificate teaches the buyer nothing. Keep a retained portion sealed for the life of the claim, and confirm that the sample, COA and quotation carry one lot code. A bench trial below a kilogram is a repack, not a catalogue pouch. It comes out of a bulk lot, carries its own handling record and is not the 1 kg foil pack. Request the split in writing and record its lot code alongside the trial data. ## Terms to agree before ordering The quotation should put commercial and quality terms on one page: Incoterm, pack, dispatch window, specification revision, a COA per lot, a retained sample, the retest date and the change route. Record them in a quality agreement ahead of the first production run; reopening the same points after a dispute is harder. Five clauses cover most of the friction. First, the minimum applies per shipment, not per order, because a 1 kg minimum and a 25 kg pack do not always match. Second, the shelf life left at delivery, expressed in months from the release date. Third, what happens if the buyer holds the material past its retest date. Fourth, change control: a change of strain, carrier or assay method is a change of material and needs notice before the next shipment. Fifth, the document set tied to each lot, including the allergen and GMO statements the destination market asks for. The catalog figures sit on the beta-glucanase product page; the release tests are on the COA page; the market routes are on the compliance page; the term is defined in the MOQ glossary entry; and the logistics page covers shipping and paperwork. ### 05 Where beta-glucanase is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/enzymes/beta-glucanase/compliance/ Reviewed: 2026-11-20 Beta-glucanase is a food enzyme preparation, and the file is built around the exact preparation: the enzyme name and EC number, the production organism and strain, the carrier, the activity and the use. The EU, US and UK each ask for a different document to prove the route, and feed use is a separate authorisation. The buyer's regulatory team confirms the destination route; the checks below show what the file should contain. In one lineThe certificate describes the lot; the strain, the carrier and the destination route are what the regulatory file has to establish. ## The framework: a preparation, not a molecule Regulation (EC) No 1332/2008 defines a food enzyme as a product from plants, animals or microorganisms that contains one or more enzymes capable of catalysing a specific reaction and is added to food for a technological purpose. A preparation is that enzyme formulated with additives or food ingredients for storage, sale, standardisation, dilution or dissolution — what a carrier does in a 50,000 U/g powder. That definition fixes the file: the substance assessed is not beta-glucanase in the abstract but a preparation from a named strain, on a named carrier, for a named use. Change the strain, the carrier or the use and the file changes with it. The same powder can be a food enzyme, a processing aid or a feed additive; those are three files. ## European Union Food enzymes are authorised under Regulation (EC) No 1332/2008, with the procedure in Regulation (EC) No 1331/2008. The Commission builds a Union list by implementing regulation, and each entry names the enzyme, the source, the foods in which it may be used and the conditions of use. The 2008 framework carries a specific reference to beta-glucanase for wine use under the oenological-practices rules, but that is a defined route, not a general permission for other foods. For a bakery, brewing, juice or supplement use, the question is which entry covers this preparation, source, food category and level. The list is adopted in stages, so check the current text rather than a supplier's summary. Until an entry applies, national provisions can continue to govern the use. The same regulation sets the label: a food enzyme supplied to a manufacturer carries the enzyme name, the food-use statement, the declared activity with its unit, the lot and the storage conditions. ## United States There is no premarket approval list for food enzymes in the same sense. A beta-glucanase preparation reaches the US market under a GRAS position — often notified in a GRAS notice — or as a processing aid, present during manufacture without a technical effect in the finished food. Which route applies decides what appears on the label. If the enzyme has a function in the finished food, it is an ingredient and appears in the ingredient list by its common name under 21 CFR 101.4. If it qualifies as a processing aid because it is present at an insignificant level with no technical effect, the labelling rules exempt it from declaration. The supplier's basis belongs in the file, because the buyer's hazard analysis under 21 CFR 117 rests on it. Two further questions are whether the strain is modified and whether lead triggers a California Proposition 65 warning; both are answered by documents, not by the certificate. ## United Kingdom As of this review, Great Britain applies the assimilated food-enzyme framework and its own authorisation route through the Food Standards Agency; Northern Ireland follows the EU list. Check the current GB position before a first shipment. ## Feed use is a separate route Feed use is authorised under Regulation (EC) No 1831/2003, for a species and an inclusion level, with its own labelling and premixture rules. A food-grade COA does not establish feed authorisation, and a feed authorisation does not make the preparation a food enzyme. If the destination is a feed mill, name it before the quotation, because the dossier and the label differ. ## Contaminants and the dose calculation The catalog limits are Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg, with APC ≤1,000 cfu/g, yeast and mould ≤100 cfu/g, and E. coli and Salmonella absent. Those are limits on the raw material. The legal limits that matter are on the finished product, and the bridge between them is the dose. Limits recalculated against the finished product | Parameter | Catalog limit | What to record | Lead (Pb) | ≤3 mg/kg | Lot result and the dose-based calculation | Cadmium (Cd) | ≤1 mg/kg | Lot result and any category exception | Mercury (Hg) | ≤0.1 mg/kg | Lot result and method | Arsenic (As) | ≤2 mg/kg | The agreed limit, method and finished-product figure Regulation (EU) 2023/915 sets maximum levels for lead, cadmium and mercury in food supplements at 3.0, 1.0 and 0.10 mg/kg respectively, and those apply to the supplement as sold. Arsenic maxima are set by food category. At 0.05 g per serving and lead at 3 mg/kg, the contribution is 0.15 µg; the arithmetic is small but belongs in the file. If the enzyme is a processing aid rather than an ingredient, the residue and the carry-over are the question, not the additive limit. ## The line the label cannot cross An enzyme activity is a process specification rather than a nutrient content, so there is no reference intake to declare and no daily value to express it against. A label or a web page can say that the product contains beta-glucanase at a stated activity, and that the enzyme is used for a technological purpose in manufacture. It cannot turn that activity into an outcome for the person taking the product. No health claim, no structure-function claim and no disease-related claim is made for beta-glucanase on this site. The editorial policy sets the line these pages follow. ## Documents, and who issues each one Documents a beta-glucanase file is expected to hold | Document | Issued by | What it has to show | Batch COA | Manufacturer | Activity result, method, contaminants, lot code | Specification sheet | Manufacturer | Release limits and unit definition | SDS | Manufacturer | Hazard statements, dust controls, transport class | Strain and source statement | Manufacturer | Organism, strain, culture collection if held | GMO statement | Manufacturer | Whether the production strain is modified | Allergen statement | Manufacturer | Carrier and fermentation-derived residues | Authorisation reference | Supplier or regulator | Union-list entry, GRAS notice, GB authorisation or feed entry ## Checks before the first order - Enzyme name, EC 3.2.1.6, CAS 9025-70-1 and the source strain are named. - The unit definition, substrate, pH and temperature are on the specification. - The COA, TDS, SDS, allergen, GMO and origin statements are on file. - Contaminant figures are recalculated against the finished-product dose. - Label and claim wording has been checked for the destination market. - The food, processing-aid or feed route is recorded with the order. The catalog specification sits on the beta-glucanase product page; the certificate lines are read on the COA page; the analytical evidence is on the identity page; the market notes are under the EU, US and UK regulatory references; and the release file is set out on the quality page. ### 06 How we prove a beta-glucanase lot has the declared activity URL: https://nutrition.rainwoodbio.com/products/enzymes/beta-glucanase/identity/ Reviewed: 2026-11-20 A beta-glucanase lot is identified by four agreeing lines: the document names the enzyme, its EC number and its source; the activity assay on a beta-glucan substrate matches the specification; the protein figure is consistent with the declared specific activity; and the lot code ties the certificate to the pack. The activity figure alone cannot separate beta-glucanase from a cellulase or from a diluted lot. In one lineIdentity rests on three agreeing lines — source, glucan assay and protein — and on a lot code that links them to the pack. ## Four questions, four kinds of evidence A certificate may name the correct material without proving it. The four rows below ask separate questions, and each needs its own evidence. An answer to the first question alone describes a document, not a drum. Four layers of beta-glucanase identity | Layer | Question | Evidence | What it proves | Document | Are the enzyme and source named? | Name, EC 3.2.1.6, CAS 9025-70-1, strain | Paperwork only | Activity | Does it cut the beta-glucan substrate? | U/g assay on a beta-glucan substrate | The function, not the source | Protein | Is the activity on a plausible protein load? | Protein and specific activity, U/mg | Concentration versus dilution | Traceability | Does the certificate belong to this pack? | Lot code on pack, certificate and retain | The link between paper and powder The first layer is the preparation itself: the enzyme name, EC 3.2.1.6, CAS 9025-70-1, the production organism and strain, the carrier and the 80 mesh. The catalog identification line is the activity assay, so the second layer carries most of the weight. That is normal for an enzyme preparation, and it is also why a single assay is not enough. ## The ratios that separate a preparation from a dilution Protein is usually read by a colorimetric method calibrated with bovine serum albumin. Divide the activity by the protein to get specific activity, U/mg. That figure separates a concentrate from a diluted powder, since dilution pulls both numbers down and leaves the ratio intact. A ratio that falls while U/g holds steady means extra protein per unit of activity: more carrier, a different recovery cut or an inactive fraction. The second ratio is the substrate pair: activity on beta-glucan against activity on carboxymethyl cellulose. A genuine beta-glucanase preparation is expected to be high on the glucan and lower on CMC; a cellulase preparation usually reads higher on CMC than on the glucan assay. The pair is evidence, not a fixed conversion, because the absolute figures depend on each method. Run both assays on the same sample when the identity is in question. ## X-ray diffraction and the limits of a solid-state test Enzyme powders are amorphous. Their X-ray pattern is a broad halo rather than sharp reflections, so XRD cannot distinguish beta-glucanase from another enzyme preparation, confirm the source, or measure activity. In a commercial powder, sharp peaks usually come from a crystalline carrier or a mineral contaminant; the enzyme itself is not crystalline. XRD remains useful for two narrow questions: whether the carrier is crystalline, and whether an inorganic contaminant is present. It is not a release test here, and a line saying “XRD conforms” with no pattern or reference adds little. Identity evidence comes from the glucan assay, the protein figure and a protein pattern against a reference lot. ## How a substituted lot presents How a beta-glucanase lot can be substituted, and what shows it | Mismatch | How it presents | Evidence | Test | Carrier dilution | Normal powder, lower U/g than the label | Activity and protein both low | Activity plus protein | Cellulase substitution | Plausible glucanase activity, different specificity | High CMC activity relative to glucan | Both assays, protein pattern | Xylanase substitution | Another hemicellulase in the drum | No glucan activity, or a weak one | Glucan assay, protein pattern | Added reducing sugar | Assay reads high without more enzyme | High activity, normal protein | Blank, sugar screen, specific activity | Heat-inactivated powder | Correct appearance, low activity | Activity low at every dilution | Activity after two hold times | Carrier swap without notice | The written specification is unchanged | Flow, water or mesh moves | Carrier identity, change control | Wrong label | Certificate names a different drum | Lot codes disagree | Pack, COA and retain Dilution and added reducing sugar work against each other: the first pushes activity down, the second pushes the reading up. Test activity and protein on one sample, and the pair shows which effect is in play. A powder at 50,000 U/g with 2% protein and another at 50,000 U/g with 10% protein are different materials. ## Identity clauses for the specification - “Beta-glucanase, EC 3.2.1.6, CAS 9025-70-1, with the production organism and strain named.” - “Activity ≥50,000 U/g by the beta-glucan substrate assay; state substrate, pH, temperature and detection.” - “Protein and specific activity reported; the method and the standard named.” - “Loss on drying ≤8.0%; particle size ≥95% through 80 mesh.” - “Carrier identity, declared activity basis and storage statement on the specification.” - “Side activity on carboxymethyl cellulose reported when the application depends on specificity.” ## Five questions to put in writing - Name the organism and strain behind this lot, and attach the strain statement. - Define one unit: substrate, pH, temperature and how the signal is read. - Report U/g and protein for the lot, then divide them to give U/mg. - Run the carboxymethyl cellulose assay beside the glucan assay and report both. - Which document ties this lot code to the pack? Written answers to all five give a buyer material to audit. An answer to the third alone gives a number that is easy to produce and difficult to verify. The catalog figures are on the beta-glucanase product page; the certificate lines are on the COA page; the unit comparison is on the beta-glucanase vs cellulase page; the assay formats are in the methods library; and the release sequence is described on the quality page. ### 02.1 Beta-glucanase vs cellulase: two glucan enzymes, two units URL: https://nutrition.rainwoodbio.com/products/enzymes/beta-glucanase/grades/beta-glucanase-vs-cellulase/ Reviewed: 2026-11-20 Beta-glucanase (EC 3.2.1.6) and cellulase (EC 3.2.1.4) are both endo-glucanases, but they are measured on different substrates: beta-glucanase on a beta-glucan substrate, cellulase on carboxymethyl cellulose. Their catalog figures — ≥50,000 U/g and ≥50,000 CU/g — are two different assays, not two strengths of one enzyme. A switch needs a new specification and a new assay, not a conversion factor. In one lineBeta-glucanase is measured on a beta-glucan substrate and cellulase on carboxymethyl cellulose, so 50,000 U/g and 50,000 CU/g are two assays, not two strengths of one enzyme. ## Two enzymes, two linkages Both names describe enzymes that cut glucan chains, which is why they are confused. The difference is where they cut. Beta-glucanase is endo-1,3(4)-β-glucanase: it acts on beta-glucans that contain both 1,3 and 1,4 bonds, the mixed-linkage glucans of barley and oats. Cellulase is endo-1,4-β-glucanase: it acts on the 1,4-linked glucose chain of cellulose, and it also has activity on the 1,4 stretches of cereal beta-glucan. Beta-glucanase and cellulase at a glance | Property | Beta-glucanase | Cellulase | Enzyme name | Endo-1,3(4)-β-glucanase | Endo-1,4-β-glucanase | EC number | 3.2.1.6 | 3.2.1.4 | CAS number | 9025-70-1 | 9012-54-8 | Main linkage | 1,3 and 1,4 in mixed-linkage beta-glucan | 1,4 in cellulose and beta-glucan | Catalog assay substrate | Beta-glucan | Carboxymethyl cellulose | Catalog activity | ≥50,000 U/g | ≥50,000 CU/g | Particle size | ≥95% through 80 mesh | ≥95% through 40 mesh ## No assay, no unit A unit describes a reaction rate; it is not a mass. The beta-glucanase unit is defined on a beta-glucan substrate, usually barley beta-glucan, at a stated pH and temperature, usually as the amount of enzyme that releases one micromole of reducing sugar per minute. The cellulase CU is defined on carboxymethyl cellulose, sometimes as reducing sugar released and sometimes as a fluidity change. Both are expressed per gram of powder as sold, and neither is a purity figure. The two numbers cannot be converted. A factor would only work if the ratio of the two activities stayed constant across preparations; it does not, because fermentation, recovery and standardisation change the balance of side activities. The only sound comparison is to run both assays on one sample. This is why a quotation that says “50,000 glucanase units” has not said which enzyme it means. The unit name, the substrate and the pH are part of the specification, not a footnote to it. ## Which substrate, which activity Barley beta-glucan is a mixed-linkage chain, and endo-1,3(4)-β-glucanase cuts at particular 1,3/1,4 junctions along it. Cellulose is a 1,4-linked chain, and cellulase cuts internal 1,4 bonds. The substrates overlap enough that each preparation can show side activity on the other's assay, which is why a single figure can look plausible for the wrong enzyme. A cellulase can release reducing sugar from beta-glucan, and a beta-glucanase can show some activity on carboxymethyl cellulose. The declared unit captures only the assay that was run; the side activity is not in the number. If a blend depends on both actions, specify both assays rather than assuming one covers the other. ## Why 50,000 against 50,000 is a trap Both catalog figures happen to be 50,000, and that coincidence is the problem. At the catalog figure, one kilogram of either powder carries 50 million of its own unit, but the units measure different reactions. A formulator who swaps one for the other at equal mass has changed the material without changing the number on the paper. If a customer asks for 50,000 CU/g of beta-glucanase, the request is not wrong; it is a different test. It asks for the cellulase assay on a beta-glucanase preparation. Run it and report it, but do not present it as the beta-glucanase activity. The same rule applies in a blend: add units only when they are the same unit, and name the assay beside every total. ## What each one does in a process Beta-glucanase works on the viscosity of cereal beta-glucan. In brewing it breaks down the beta-glucan that slows wort separation and filtration; in wine it aids filtration; in feed it addresses the viscosity of barley- and oat-based diets. Cellulase works on cellulose and the plant cell wall, where the target is the cellulosic fraction rather than the mixed-linkage glucan. The two can be complementary in a blend: one opens the beta-glucan, the other works the cellulose. They are not substitutes. If the target is beta-glucan viscosity, specify beta-glucanase units on beta-glucan; if the target is cellulose, specify cellulase on carboxymethyl cellulose or filter paper. Neither enzyme is sold here as a nutrient, and neither carries a health claim; the effects described are technological. ## What changes when you switch A switch at equal mass changes the units delivered, the side activities, the mesh (80 against 40), the dust and the dissolution rate. It also changes the ingredient name on the label and the source organism in the regulatory file. If a blend already contains cellulase and the formulator wants more beta-glucanase action, the first question is whether the cellulase's side activity was already counted. Adding beta-glucanase on top may double-count the same substrate. Run both assays on the blend before and after the change, and write a change control. A new enzyme, a new source or a new unit definition is a change of material, and the specification, the label and the market file all move with it. ## How to specify and compare the two - “Enzyme name, EC number, CAS number and production source.” - “Unit definition with substrate, pH, temperature and detection.” - “Activity result with method reference and declared basis.” - “Protein or specific activity, loss on drying and particle size.” - “Side activities that matter to the application, reported by assay.” Ask for both assays on the same sample when comparing suppliers or planning a switch. A certificate that reports only one number has answered only one question. The beta-glucanase catalog figures are on the beta-glucanase product page; the cellulase figures are on the cellulase product page; the CU, EGU and FPU scales are compared on the cellulase activity-units page; the certificate lines are on the beta-glucanase COA page; the assay vocabulary is in the assay glossary entry; and the release sequence is described on the quality page. ### 01 What the COA for black currant seed oil actually contains URL: https://nutrition.rainwoodbio.com/products/fatty-acids/black-currant-seed-oil/coa/ Reviewed: 2026-11-20 The certificate for a black currant seed oil lot reports the fatty acid profile by GC, free fatty acid, peroxide value, moisture, heavy metals, microbiology and appearance. The profile identifies the oil; free fatty acid and peroxide value describe its condition. Every line should name its method and its limit, with the laboratory's measured value held in a separate column. In one lineA black currant seed oil certificate is read as a profile, not a single marker: GLA, ALA and linoleic acid together identify the oil, while free fatty acid and peroxide value describe how well it has been kept. ## The certificate as a test report A lot certificate earns its place when a reviewer can follow each line without asking a question. That means three columns, not one: the parameter, the method behind it, and the limit it was released against. When a row offers only “conforms”, the conclusion is visible but the evidence is not. The identity row is a fatty acid profile, not a single retention time: GLA, ALA and linoleic acid together are the evidence, because one GLA figure can be matched by a blend. Fatty acid profile and condition tests · black currant seed oil | Parameter | Method | Release limit | Appearance | Visual | Clear to slightly hazy oil | Identification | GC fatty acid profile | Profile conforms to the reference | Gamma-linolenic acid (GLA) | GC of fatty acid methyl esters | 15.0–20.0% | Alpha-linolenic acid (ALA) | GC of fatty acid methyl esters | 12.0–15.0% | Linoleic acid (C18:2) | GC of fatty acid methyl esters | 40.0–50.0% | Free fatty acid | Titration | ≤0.50% | Peroxide value | Iodometric titration | ≤5.0 meq O₂/kg Moisture, metals and microbiology · black currant seed oil | Parameter | Method | Release limit | Moisture | Karl Fischer | ≤0.1% | Heavy metals | ICP-MS, closed-vessel digest | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Enumeration and absence testing | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent The first table carries the profile and the two condition tests; the second carries moisture, metals and microbiology. A certificate with only the first has described the oil, not its fitness for use. ## The basis behind the profile The GC result is a percentage of total fatty acids, reported from the methyl esters. The certificate needs to name that convention. “GLA 17.5%” can mean 17.5% of the total fatty acid methyl esters by peak area, 17.5 g per 100 g of oil, or 17.5% of the oil as weighed, and those are not the same quantity. A triglyceride is mostly fatty acids with a glycerol backbone, so a profile on total fatty acids reads slightly higher than one on the oil weight. The gap is small, but mixing the two bases will not reconcile with the fill weight. The profile should be identified against a certified FAME standard mix, with the column, detector and integration parameters named. Area normalisation is usual, but an internal standard gives a more defensible absolute figure. If the certificate says “profile conform” without individual percentages, ask for the chromatogram and the integration report. ## Release limit versus batch result A release limit marks the edge of the specification; a batch result records what the laboratory actually found. Keep them apart. The limit sits in one column and the measured value in another, and the method is named so the number can be reproduced. A “result” column that simply repeats the specification range is a second copy of the gate. Reading a black currant oil result against its limit | Test | Specification limit | What the certificate must print | GLA | 15.0–20.0% | A measured percentage of total fatty acids, with the basis | ALA | 12.0–15.0% | A measured percentage of total fatty acids | Linoleic acid | 40.0–50.0% | A measured percentage of total fatty acids | Free fatty acid | ≤0.50% | A measured percentage, with the titration method | Peroxide value | ≤5.0 meq O₂/kg | A measured value in meq O₂/kg A pass statement is the end of the argument, not the argument itself. For a profile, the three markers have to agree with each other; a lot that meets the GLA figure while ALA is out of range has not met the profile. For peroxide value, the result is a measured number, not a statement that the oil “is fresh”. ## What moves between batches Harvest, cultivar and origin move the GLA and ALA figures. Pressing and finishing move the free fatty acid, the colour and the tocopherol content. Storage and transport move the peroxide value and the p-anisidine value. Those are different causes, and they call for different questions. A GLA result inside 15.0–20.0% while ALA drifts toward the bottom of its range is still a conforming lot, but it is a different oil for a label that declares both. A peroxide value that climbs from lot to lot points to storage or the journey, not the seed; a free fatty acid result near 0.50% points to pressing and seed moisture. Colour is the least quantitative line. Cold-pressed black currant seed oil is clear to slightly hazy and can vary from pale yellow to golden; a darker lot is not automatically oxidised. Read appearance with peroxide value, not instead of it. If the shelf life is long, ask for the p-anisidine value as well; it is not in the catalog specification. ## When an outside laboratory is warranted An outside laboratory earns its place when the source is new, when a shipment enters a regulated market for the first time, when the profile is contested, or when a peroxide result disagrees with the smell and taste of the oil. The panel is not a full repeat of the certificate: GC-FAME with the individual fatty acids, free fatty acid, peroxide and p-anisidine values, moisture, ICP-MS metals and the micro count. Add a sterol and tocopherol profile when the question is authenticity rather than condition; those minor components are harder to match than the main fatty acids. A stable-isotope result can support the source question when the commercial risk justifies it. Ask for each screen's detection limit; a “not detected” line without a limit says more about the method than the sample. The chain of custody is part of the evidence: the sample tested should be the retained sample, and the report should name the lot. If a result is contested, send the referee the retained sample, the certificate and the specification, and ask for tests that separate the profile from a blend. ## What to compare between suppliers Six lines make a useful side-by-side comparison: species and origin; the GLA, ALA and linoleic figures with the basis; free fatty acid and peroxide value; moisture and contaminants; pack and lot code; process, cold-pressed or refined. Two quotations that agree on GLA but differ on ALA are not the same oil. Traceability sits behind those numbers: who pressed the seed, which species and cultivar, and whether the oil was filtered or refined. The catalog specification sits on the black currant seed oil product page; the tests that separate the oil from its neighbours are on the identity page; the neighbouring GLA oil is on the evening primrose oil page; the method library is indexed under analytical methods; the quality page sets out how a lot is released. ### 02 Cold-pressed, refined or concentrated: black currant seed oil grades URL: https://nutrition.rainwoodbio.com/products/fatty-acids/black-currant-seed-oil/grades/ Reviewed: 2026-11-20 Black currant seed oil reaches the market in three process states: cold-pressed and unrefined, refined after pressing, and standardized to a higher GLA figure. The catalog item is the first, at GLA 15.0–20.0%, ALA 12.0–15.0% and linoleic acid 40.0–50.0%. The state you buy changes the colour, the free fatty acid, the minor components and the label arithmetic, so it belongs in the purchase specification rather than in a footnote. In one lineThe grade is the process behind the oil: cold-pressed, refined and standardized oils can share a GLA family but not a colour, a free fatty acid limit or a label. ## Three process decisions, not three brands Black currant oil starts with Ribes nigrum seed. The first decision is the seed itself: cultivar, harvest and origin set the GLA and ALA ranges before any machine touches the oil. The second is extraction: a mechanical press at controlled temperature, with no solvent, is what the words cold-pressed describe. The third is finishing: a crude oil can be sold after filtration, or it can be degummed, neutralised, bleached and deodorised. Those choices are cumulative. A refined oil can start from a cold-pressed crude oil, because pressing is the extraction step and refining is the clean-up. A standardized oil is a further decision: a physical separation step lifts the GLA fraction above the seed's natural range, and the result gets its own specification. The species check matters. Evening primrose oil and borage oil are different plants with their own fatty acid profiles. They are alternatives, not grades of black currant oil, and a blend of two species is a third material. ## The grades side by side Process states of black currant seed oil, with the catalog item in the first column | Property | Cold-pressed, unrefined (catalog) | Refined | GLA-standardized | Extraction and finishing | Mechanical press, no solvent; filtered | Pressed, then degummed, neutralised, bleached and deodorised | Feedstock oil taken through a separation step | GLA on the oil | 15.0–20.0% | 15.0–20.0% | Above the natural range; stated on its own specification | ALA on the oil | 12.0–15.0% | 12.0–15.0% | Follows the feedstock; declare the result | Free fatty acid | ≤0.50% | Lower than the crude oil | Fixed on the new specification | Colour and clarity | Pale yellow to golden; can haze or drop sediment | Lighter and brighter; more consistent | Varies with the feedstock and the separation | Minor components | Tocopherols and sterols largely retained | Partly reduced by deodorisation | Changed by the separation | What the order says | “Cold-pressed, unrefined” | “Refined” | “GLA xx%, standardized” The rows are not a ladder. Refining is a clean-up, standardization is a concentration, and cold-pressed is an extraction claim. A buyer who needs a pale, mild oil for a softgel may choose refined; a buyer whose label says cold-pressed cannot. The table describes three separate offers, not one product at three quality levels. ## Clarity, sediment and the fill line Cold-pressed black currant oil is clear to slightly hazy and can drop a sediment on standing; cooling can make it cloud. Those are physical behaviours, not signs of oxidation. A softgel line usually filters the fill, and a heavy sediment load means more filter changes and more oil held in the filter. Refining removes gums and waxes, so the oil is brighter and more consistent, but deodorisation also strips some tocopherols and sterols. Standardization changes the fatty acid balance and can change colour and mouthfeel. Each step trades something away, and the specification should say which step was used. Viscosity is low in all three states, and the oil is insoluble in water. Clean-up on the fill line needs a solvent or a detergent, not a water rinse. The oil can soften a softgel seam if it migrates into the shell, so the shell formula and the fill weight belong in the encapsulation trial. ## Two fatty acids, two label numbers At 15.0–20.0% GLA, a gram of oil carries 150–200 mg. A 500 mg softgel carries 75–100 mg; a 1,000 mg softgel carries 150–200 mg. At 12.0–15.0% ALA, the same gram carries 120–150 mg of ALA, so a 1,000 mg softgel carries 270–350 mg of the two combined. The label has to declare the GLA and ALA figures separately, and both come from the oil weight and the profile. A standardized oil changes the weight needed for a fixed GLA figure; it does not change the need to state the basis. A refined oil keeps the natural GLA range, so the capsule weight stays the same while the colour and free fatty acid move. Do not use the GLA figure alone to choose a grade. The ALA line and the process claim are part of the same purchase, and a softgel built around 500 mg of oil cannot reach a higher GLA figure without changing the oil, the capsule size or the number of capsules per serving. ## What to put in the specification Name the species, the extraction, the finishing and the GLA target in that order: “Black currant (Ribes nigrum) seed oil, cold-pressed, unrefined, GLA 15.0–20.0% of total fatty acids by GC.” Then add ALA 12.0–15.0%, linoleic acid 40.0–50.0%, free fatty acid ≤0.50%, peroxide value ≤5.0 meq O₂/kg, moisture ≤0.1%, the metal and microbiology panels, and the pack. Add p-anisidine if the shelf life is long, and a sterol and tocopherol profile if the source or the grade is disputed. For a refined or standardized grade, replace the process line and the GLA range with the new values; do not leave the cold-pressed wording in place. A specification that says only “18% GLA” has not told the supplier whether to press, refine or standardize. The process is part of the product identity, not a manufacturing detail. ## When a grade switch is the wrong move A cold-pressed claim is a promise about the process. If the label, the customer specification or the market file says cold-pressed, a refined lot does not satisfy it, even when the GLA result is identical. Refining also does not stop oxidation: it lowers free fatty acid and some colour, but peroxide value follows the seed, the press, the store and the pack. Do not move to a standardized oil to shrink a capsule without rebuilding the label, the specification and the certificate. The GLA density changes, the serving weight changes and the ingredient name may change. Do not move to evening primrose oil either; it is a different species with a lower GLA range. A grade change is a change control. It needs a new specification revision, a new certificate and a label check, not a verbal switch at the order desk. The catalog item is on the black currant seed oil product page; certificate lines are explained on the COA page; oxidation is covered on the stability page; the alternative species is on the evening primrose oil page; the two-oil comparison is on the level-four page; test methods are indexed under analytical methods; and release is described on the quality page. ### 02.1 Black currant seed oil vs evening primrose oil: two GLA profiles URL: https://nutrition.rainwoodbio.com/products/fatty-acids/black-currant-seed-oil/grades/black-currant-oil-vs-evening-primrose-oil/ Reviewed: 2026-11-20 Black currant seed oil and evening primrose oil are both GLA oils, but they are not interchangeable. Black currant oil carries GLA 15.0–20.0% and ALA 12.0–15.0% with linoleic acid 40.0–50.0%; evening primrose oil carries GLA 8.0–11.0% and is dominated by linoleic acid at 65.0–75.0%, with no ALA marker in its catalog range. The difference changes the oil weight per GLA serving, the oxidation risk and the ingredient name. In one lineThe two oils share a GLA family but not a profile: black currant oil brings ALA beside its GLA, evening primrose oil brings linoleic acid and no ALA marker in its catalog range. ## Two species, two fatty acid profiles Both oils are seed oils sold for their gamma-linolenic acid, and both belong to the same n-6 family at that marker. The resemblance stops there. Black currant seed oil is pressed from Ribes nigrum seeds, CAS 68606-81-5; evening primrose oil is pressed from Oenothera biennis seeds, CAS 90028-66-3. The species, the CAS number and the full profile are the identity, not the word “GLA”. Black currant seed oil and evening primrose oil · catalog profiles | Property | Black currant seed oil | Evening primrose oil | Species | Ribes nigrum | Oenothera biennis | CAS number | 68606-81-5 | 90028-66-3 | GLA | 15.0–20.0% | 8.0–11.0% | ALA | 12.0–15.0% | — | Linoleic acid | 40.0–50.0% | 65.0–75.0% | Oleic acid | — | 8.0–15.0% | Free fatty acid | ≤0.50% | ≤0.50% | Peroxide value | ≤5.0 meq O₂/kg | ≤5.0 meq O₂/kg A dash means the catalog does not set that marker for that oil; it does not mean the fatty acid is absent. Each oil is specified on its own marker set. The profiles are not symmetrical: black currant oil adds ALA and a second n-3 pathway, while evening primrose oil is linoleic-dominant with a lower GLA figure. Black currant oil also carries stearidonic acid, a minor n-3 fatty acid; it is not one of the three catalog markers, so request it if the label names it. Evening primrose oil's marker set does not include ALA, and that absence helps separate the two oils on a chromatogram. ## The oil weight behind a GLA serving GLA density is the first practical difference. At 15.0–20.0%, one gram of black currant oil carries 150–200 mg of GLA; at 8.0–11.0%, one gram of evening primrose oil carries 80–110 mg. The same 1,000 mg softgel therefore delivers 150–200 mg of GLA from black currant oil against 80–110 mg from evening primrose oil; a 500 mg softgel carries 75–100 mg against 40–55 mg. Oil weight for a 100 mg GLA serving, calculated from the catalog ranges | Oil | GLA per gram | Oil for 100 mg GLA | 1,000 mg softgel | Black currant, low end | 150 mg | 0.67 g | 150 mg GLA | Black currant, high end | 200 mg | 0.50 g | 200 mg GLA | Evening primrose, low end | 80 mg | 1.25 g | 80 mg GLA | Evening primrose, high end | 110 mg | 0.91 g | 110 mg GLA These are arithmetic conversions, not intake advice. To declare 100 mg of GLA per serving, the formulator needs 0.50–0.67 g of black currant oil or 0.91–1.25 g of evening primrose oil. The capsule size, the number of capsules and the oil blend follow from that figure, and the ALA declaration follows from the black currant profile at 12.0–15.0%, or 120–150 mg per gram of oil. A concentrate can lift either oil above its catalog GLA range, but it is a separate specification with its own label name. ## The oxidation difference Both oils are highly unsaturated and both are specified at peroxide value ≤5.0 meq O₂/kg and free fatty acid ≤0.50%. Their triene loads are not equal. Black currant oil carries GLA 15.0–20.0% plus ALA 12.0–15.0%, so roughly 27–35% of its fatty acids are trienoic; evening primrose oil carries GLA 8.0–11.0% and no specified ALA marker, so its triene load is much lower. A higher triene load generally means faster oxidation at the same temperature, light exposure and antioxidant level. That does not make black currant oil a fragile material. It makes the pack and the storage condition more important: a sealed amber bottle, a closed drum, a cool dark store and a short in-use period. Ask for the p-anisidine value alongside the peroxide value when the shelf life is long, because the peroxide value alone shows the early stage of oxidation and can fall again as the aldehydes form. Evening primrose oil has its own oxidation risk, and its linoleic acid fraction is still polyunsaturated. The comparison is relative, not absolute: both oils need an oxygen barrier, and neither should be judged on the release peroxide value alone after months in a warehouse. ## The label and the ingredient name The two oils are different ingredients, and a label that names one cannot be filled with the other. “Black currant seed oil” and “evening primrose oil” are separate declarations, and a blend of the two is a third declaration with both names. The species name, Ribes nigrum or Oenothera biennis, is the unambiguous form if the label has room. The GLA figure on the panel follows from the oil weight and the profile; it is not a copy of the raw-material range. If the formula declares ALA as well, that figure comes from the black currant oil; evening primrose oil does not carry the ALA marker. No disease claim is made for either oil, and a structure/function statement needs its own substantiation and the market's disclaimer. ## Writing each oil into its own specification For black currant oil, write the species and process, then GLA 15.0–20.0%, ALA 12.0–15.0% and linoleic acid 40.0–50.0% of total fatty acids by GC, followed by free fatty acid, peroxide value, moisture, the metal and microbiology panels, and the pack. For evening primrose oil, write the same structure with GLA 8.0–11.0%, linoleic acid 65.0–75.0% and oleic acid 8.0–15.0%, and do not carry the black currant ALA line across. A specification that lists “GLA oil” without the species and the full profile has described a category, not a material. The two oils have different CAS numbers, different marker ranges and different label names, and a purchase order that names only the GLA figure has not chosen between them. ## When each oil fits Choose black currant oil when the formula needs a higher GLA density and the ALA beside it is part of the declared profile. Choose evening primrose oil when the label, the customer specification or the existing formula names that species and its linoleic-dominant profile. The choice is a formulation and label decision, not a therapeutic one, and this site makes no health claim for either oil. Changing oil means rebuilding the specification, obtaining a certificate for the new material and checking the label again. Catalog limits sit on the black currant seed oil product page and the evening primrose oil product page; the certificate is explained on the COA page; process routes are on the grades page; methods are indexed under analytical methods; and release is described on the quality page. ### 03 Black currant seed oil oxidises; the pack decides the shelf life URL: https://nutrition.rainwoodbio.com/products/fatty-acids/black-currant-seed-oil/stability/ Reviewed: 2026-11-20 Black currant seed oil fails by oxidation rather than by microbial growth. The GLA and ALA double bonds react with oxygen, light and heat, so peroxide value rises, the fatty acid profile drifts and the oil can turn rancid before the pack is empty. The sealed pack, the headspace and the storage temperature decide the shelf life. In one lineThe shelf life of black currant seed oil is an oxidation budget: the pack, the headspace and the storage temperature decide how long the double bonds survive. ## The sealed pack: oxygen, light and headspace The oil is a liquid, not a dry powder, so “dry” here means the sealed pack and the water it must keep out. The catalog moisture limit is ≤0.1%. Water is not the main failure mode, but it supports hydrolysis and can cloud the oil; headspace oxygen is the more important variable. The 1 kg amber bottle protects against light and is the practical pack for a bench trial. The 25 kg HDPE drum is robust, but HDPE is not an absolute oxygen barrier; for long storage, keep the drum closed, keep the liner intact and store it cool and dark. A drum that has been opened and resealed is a different storage case from a sealed drum, and the in-use period should say so. Light comes next. The amber bottle is not a licence to leave the oil on a windowsill. Leave it in its original pack, or decant it into an opaque vessel with a tight closure; a clear jar on a bench is convenient and wrong. ## The softgel, the emulsion and the heat load The oil is not used as an aqueous solution. In a softgel it is the fill; in an emulsion or a powder on carrier it is dispersed. Each format changes the oil's contact with oxygen. A softgel shell is a barrier, but the fill line exposes the oil as a thin film, and encapsulation adds a heat load. An emulsion creates an oil–water interface and can introduce metal ions from the water or the equipment; iron and copper are oxidation catalysts even at low levels. A powder on carrier has a large surface area and needs an antioxidant and a moisture barrier. Where a liquid blend is the only option, keep dissolved oxygen low, exclude pro-oxidant metals and validate the hold time and fill temperature. Bulk oil data does not carry over to a softgel, an emulsion or a powder. ## What drives degradation Factors that move black currant seed oil during storage | Factor | What it does | Control | Oxygen | Forms hydroperoxides; peroxide value rises | Sealed pack, low headspace, nitrogen where justified | Light | Accelerates oxidation and colour change | Amber bottle, opaque drum, dark store | Heat | Raises the reaction rate | Cool store; controlled fill temperature | Trace metals | Iron and copper catalyse oxidation | Stainless equipment; metal limits in water and pack | Moisture | Supports hydrolysis; free fatty acid rises | ≤0.1% moisture; dry store | Tocopherols | Native antioxidants, consumed as the oil oxidises | Protect from refining loss; consider added tocopherol None of these acts alone. Heat speeds the reaction that light starts, a half-empty bottle leaves more oxygen against the oil, and a humid store adds water to the same surface. The question to ask is not whether the oil is stable, but for how long, in which pack, under which storage condition. ## A stability protocol for the oil Before it produces a number, a protocol has to fix the pack, the condition, the sampling times and the tests. The warehouse case is modelled by 25 °C/60% relative humidity over the long term and 30 °C/65% relative humidity at the intermediate point; 40 °C/75% relative humidity supplies the accelerated stress. A light-exposure arm is needed as well, because a dark incubator cannot see photochemical damage. Test peroxide value, p-anisidine value, free fatty acid, moisture, appearance and the fatty acid profile at each point. Peroxide value measures the first oxidation products; p-anisidine value measures the secondary aldehydes, so the two together show whether the oil is at the start or the end of the oxidation chain. A Rancimat or OSI induction time is a useful screen, but it is not a shelf life on its own. The summary must cover the pack you will actually receive. A bottle and a drum differ in headspace and in how often they are opened, and a result from a sealed drum says nothing about oil repacked later. ## The finished formula changes the answer Softgels are not water-free systems just because the fill is oil. The shell can pass moisture inward, and the fill line exposes the oil as a film; check peroxide and p-anisidine at release and again after storage, and inspect the shell for softening or leakage. A carrier powder brings its own matrix and antioxidant, and its larger surface area changes the rate, so the oil's bulk data is only the starting point. An oil blend is a new oxidation system. A highly unsaturated oil can dominate the blend's oxidation behaviour even at a modest share, and a tocopherol addition that is adequate for one oil may be insufficient for another. The formulator decides whether an antioxidant or an oxygen scavenger is needed; that is a stability and label decision, not a repair for a pack that lets oxygen in. ## How the shelf life is set No single shelf-life figure is published for this oil, because the pack and the storage condition are part of the answer. The retest period is written into the specification and backed by the stability file for that pack. A figure that omits the pack, the condition and the test panel describes a hope, not a shelf life. When the retest period ends, re-assay the retained sample before extending anything. Extension follows data, and a bulk result does not follow the oil into a bottle or a drum that was packed later. Standard packs are listed on the black currant seed oil product page; release tests are on the COA page; pack sizes and lead time are on the MOQ page; the alternative GLA oil is on the evening primrose oil page; the method library describes the tests; and the quality page sets out lot release. ### 04 Black currant seed oil: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/fatty-acids/black-currant-seed-oil/moq/ Reviewed: 2026-11-20 The smallest order is a single 1 kg amber bottle; production volumes move in 25 kg HDPE drums. Standard packs are dispatched in 1–7 days. A firm quote depends on six answers: which species and process, which fatty acid profile, which condition tests, how much and in what pack, where it is going and on which Incoterm, and which documents the market needs. In one lineThe 1 kg bottle is the smallest saleable unit because a lot can be sampled, tested and followed from it without broaching a 25 kg drum. ## Why the minimum is 1 kg One bottle is enough to run a bench trial, hold back a retained sample and send a portion to an outside laboratory. It also travels as a parcel, so a formulator can start work before the production plan is signed off. The bottle carries a lot code; it is not a scoop out of a drum. Smaller quantities mean splitting a bulk lot and repacking it, which adds handling, increases headspace and breaks the link to the original pack. A 25 kg drum lowers the handling per kilogram but ties up inventory for longer. The minimum is set by the pack, not by a volume target. ## Packs and formats Standard black currant seed oil packs | Pack | Net weight | Typical use | Notes | Amber bottle | 1 kg | Trial, sample, small batch | Light barrier; reseal after opening | HDPE drum | 25 kg | Production | Inner liner; identify the lot on both drum and liner | Powder on carrier | On request | Dry blends and sticks | Carrier and oil load change the specification The powder on carrier is a different product, not a packing variant. Its oil load, carrier, moisture and particle size have to be specified, and its GLA figure is calculated on the oil or on the powder—state which. Do not order the powder as a substitute for the oil without a new specification and a label check. ## Lead time and dispatch Standard packs are dispatched within 1–7 days of order confirmation. The clock covers picking, documents and handover to the carrier; transit, customs and the customer's own release sit outside it. A non-standard pack or a powder on carrier takes longer and should be quoted as a separate line. Get the dispatch date in writing rather than relying on the range. A 1 kg bottle normally goes as a parcel; the drum moves on a pallet. The Incoterm allocates freight booking and customs clearance. Send the COA and the other lot documents with the consignment, not after it. ## What a quotation needs A quotation can be compared only when it states these six points: - Product and process. Black currant (Ribes nigrum) seed oil, cold-pressed, CAS 68606-81-5. - Profile. GLA, ALA and linoleic acid ranges, with the basis and the GC method. - Condition tests. Free fatty acid, peroxide value, moisture and the contaminant panel. - Quantity and pack. A 1 kg amber bottle, a 25 kg HDPE drum, or powder on carrier. - Destination and Incoterm. The delivery country, the port or address, and the agreed trade term. - Documents and market. COA, specification, SDS, and any statement the importer needs. A quotation that omits the process or the destination market is not yet an offer that can be checked. The same oil can suit one destination and fall outside the file for another, so the documentation travels with the offer. Commercial terms belong on the quotation. ## A sample without a lot code proves little Qualification begins with one bottle. Test the fatty acid profile, free fatty acid, peroxide value and moisture before scaling up, and draw a retained sample from that same bottle. The sample, the COA and the quotation should all carry the same lot code. Without that code, it is a sample with no history. A trial that needs less than a kilogram is a split from a bulk lot, not a catalog bottle. It carries its own handling record and cannot be sold or described as the 1 kg amber pack. Request the split in writing and file its lot code with the trial data. ## Terms to settle before the first order Put the commercial terms and the quality terms in one document: Incoterm, pack, dispatch window, specification revision, a COA per lot, the retained sample, the retest period and the change route. Agree them before the first production order, when the conversation is still easy. When a lot falls outside the agreed specification, the answer is a joint re-test on the retained sample against the named method, not a photograph of the packaging. The quality agreement should name the referee laboratory both sides accept and say who commissions the work. A return argued from appearance alone is difficult to defend either way. The black currant seed oil product page carries catalog data; release tests are listed on the COA page; oxidation is covered on the stability page; the alternative oil is on the evening primrose oil page; the glossary defines MOQ; the tests are indexed under analytical methods; and the quality page describes release. ### 05 The regulatory file for black currant seed oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/black-currant-seed-oil/compliance/ Reviewed: 2026-11-20 Black currant seed oil is supplied as cold-pressed Ribes nigrum seed oil, CAS 68606-81-5. The specification is where the file starts, but the file itself is built around the species, the process, the GLA and ALA profile and the food-supplement rules of the destination. The buyer's regulatory team owns that determination. In one lineThe spec sheet describes the oil; the regulatory folder shows why it can be sold, at what limits and under which label. ## What the file contains Four parts have to line up: the specification version for cold-pressed black currant seed oil, the lot certificate, the finished-product limits and label rules, and a change-control record covering source, process and pack. The COA describes the lot, the TDS carries the specification and the SDS covers safe handling; none of the three decides the destination route. Alongside the certificate, the folder should hold the allergen and GMO statements, the origin record, the residual-solvent statement and any customer-specific declaration. A missing item is easier to close at quotation than after the container has sailed. Put a versioned document list at the front. ## European Union In the EU, a seed oil sold in food supplements sits under the food-supplement framework, general food law and the labelling and claims rules. The file records the route for the finished product: the food-supplement notification or member-state arrangement, the ingredient declaration as Ribes nigrum seed oil, and the nutrition and health claim review. The contaminant regulation applies to the finished product, and the current consolidated text is the reference as of this review. The novel-food status is checked for the specific source and process, even where the oil has a history of food use; the file should record that check rather than assume it. The member-state route is the buyer's call, and the file should record it alongside confirmation that the specification matches the material on the market. The EU regulatory note sets out the framework references. ## United States For the US, the file has to show how black currant seed oil qualifies as a dietary ingredient and whether the planned use is consistent with that status. The supplier states the legal basis it relies on and supplies the document behind it; the buyer verifies that the basis reaches the finished product and the label. Manufacturing and holding are covered by the dietary-supplement cGMP rules, and the panel has to identify the ingredient and state its amount per serving. Structure/function wording gets a separate review: substantiation first, then the DSHEA disclaimer. None of that is covered by the certificate. No disease claim is permitted for this ingredient, and the supplier makes no health claim on the specification. ## United Kingdom Great Britain and Northern Ireland do not share one rulebook. GB uses its own food-supplement and claims rules; Northern Ireland follows the EU framework. Which one applies is decided by the delivery address, and that decision should be written into the order so the label and its legal citation can be checked later. ## Contaminants and limits The catalog limits are material gates, not finished-product limits. The table is a starting point; the destination's current text and the daily dose settle the final figure. Catalog limits for black currant seed oil and what the file should show | Parameter | Catalog limit | What the file should show | GLA | 15.0–20.0% | Measured profile, with the basis | ALA | 12.0–15.0% | Measured profile | Free fatty acid | ≤0.50% | Measured value and method | Peroxide value | ≤5.0 meq O₂/kg | Measured value; p-anisidine if shelf life is long | Moisture | ≤0.1% | Measured value | Heavy metals | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Measured result per element, then the finished-product calculation A destination may set a lower limit for oils and fats than the catalog gate, so the finished-product calculation uses the measured result and the daily dose, not the catalog limit. A certificate that reports only a pass statement has not supplied the number the calculation needs. ## Label and claims On the label, the oil is declared by its species: Ribes nigrum seed oil, or black currant seed oil. Evening primrose oil is a different species and is not an interchangeable name. The GLA and ALA quantities per serving belong in the nutrition or supplement panel, calculated from the oil weight and the profile, not copied from the raw-material range. Claim review is a separate exercise from specification review. A structure/function statement needs substantiation and the market's disclaimer, and a nutrition claim on ALA or omega-3 belongs to the finished product and its measured fatty acid content. No disease claim is made for this ingredient. In the EU, the claims regulation and the nutrition-claim Annex are checked as of this review; in the US, the DSHEA disclaimer applies. This site publishes the specification only and makes no health claim for the oil. ## Documents for the file Start the folder with the COA: GC profile, free fatty acid, peroxide value, moisture, heavy metals and microbiology. Then add the specification (species, process, marker ranges), the TDS and SDS, allergen and GMO statements, the origin and source record, and the residual-solvent statement. The last one is still worth requesting for a cold-pressed oil: the claim that no solvent was used is a process statement that should be documented, not inferred from the word “cold-pressed”. Add the p-anisidine value when the customer's shelf life is long, the sterol and tocopherol profile when a blend is a risk, and any organic or identity certificate that the destination requires. The analytical methods are indexed under analytical methods, and the quality page explains how the lot file is released. ## Checklist before the first order - The specification revision, species and process are identified. - The document set (COA, TDS, SDS, allergen, GMO, origin, residual solvent) is complete. - The GLA and ALA figures are stated with their basis. - Contaminant results have been recalculated for the finished-product dose. - Label and claims review is complete for the destination. - Source, process and pack are under change control. Catalog data is on the black currant seed oil product page; the identity page covers the profile evidence; the evening primrose oil page shows the neighbouring source; and the quality page describes the release workflow. ### 06 How we prove a lot is black currant seed oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/black-currant-seed-oil/identity/ Reviewed: 2026-11-20 A black currant seed oil lot is identified by its fatty acid profile, not by a single GLA figure. GLA 15.0–20.0%, ALA 12.0–15.0% and linoleic acid 40.0–50.0% together separate Ribes nigrum seed oil from evening primrose, borage and flaxseed oils. The sterol and tocopherol fingerprint and the source record support the profile. In one lineThe GC profile names the oil, the sterol and tocopherol pattern backs up the source, and the condition tests show how the lot has aged. ## The four identity layers A correct name on a certificate proves only that the paperwork is correct. The four questions below are independent, and each needs its own result. Whoever answers only the first question has given you a label, not a drum. Four separate questions behind a black currant oil identity | Level | What it asks | Analytical evidence | What it establishes | Document | Is the species named? | Species, CAS number, process | Paperwork only | Fatty acid profile | Is the GLA, ALA and linoleic pattern right? | GC of fatty acid methyl esters | The oil family and the source | Minor components | Is it black currant, not a blend? | Sterol and tocopherol profile | The botanical source | Condition | Is the oil fresh? | Free fatty acid, peroxide and p-anisidine values | What storage has done since pressing The first layer is necessary and simple. The second is the routine identity test. The third is the one that catches a blend built to pass the second. The fourth does not prove identity at all, but an oxidised lot can look wrong on the profile and a fresh lot can hide a source problem. Read all four together. ## The ratios that separate the oils The catalog ranges give ratios that are useful as a first screen. GLA divided by ALA is about 1.0–1.7 across the ranges; linoleic acid divided by GLA is about 2.0–3.3. Evening primrose oil at GLA 8.0–11.0% and linoleic acid 65.0–75.0% gives a linoleic-to-GLA ratio of about 6–9, and its ALA is not a specified marker. A profile that lands outside the black currant ratios is a different oil or a blend. The ratios also catch a blend built to hit one number. Adding evening primrose oil to black currant oil raises linoleic acid and lowers ALA; adding flaxseed oil raises ALA and dilutes GLA. The GLA figure can be held while the ratios move. Calculate them from the measured percentages, not from the label. The ratios are derived from the catalog ranges, not from a batch result. They are a screening aid, not a specification, and a lot near an edge needs the full profile and the minor-component data before the source question is settled. ## X-ray diffraction and the solid state X-ray diffraction is a solid-state method and has no direct role in an oil. It becomes relevant only for the powder-on-carrier format, where it can show the crystalline or amorphous state of the carrier, or when a crystalline contaminant is suspected. It does not identify the fatty acid profile and it does not measure the GLA content. For an oil, the solid-state question is the wrong question. Ask for GC-FAME, sterols, tocopherols and, if the source is disputed, a stable-isotope result. A certificate that offers XRD as identity evidence for an oil has answered a question the material does not pose. ## What adulteration looks like Adulterants in black currant seed oil and how they show up | Material | Effect on the profile | Warning sign | Confirmatory test | Evening primrose oil | Raises linoleic acid, lowers ALA | Linoleic-to-GLA ratio high; ALA low | GC profile, sterols | Flaxseed oil | Raises ALA | ALA above range; GLA diluted | GC profile | Sunflower or soybean oil | Dilutes GLA and ALA | GLA low; linoleic acid high | GC profile, sterols | Borage oil | Raises GLA | GLA above range; ALA low | GC profile, sterols | Refined oil sold as cold-pressed | Lowers colour, free fatty acid and tocopherols | Free fatty acid low; tocopherols low; colour pale | Free fatty acid, tocopherols, appearance The strongest single signal is the combination of a low ALA with a high linoleic-to-GLA ratio, which is the evening primrose pattern. The second is an ALA figure above the range, which points to flaxseed. Neither is proof on its own; the sterol and tocopherol profile is what turns a suspicion into a finding. ## How to write the identity into the specification - “Black currant (Ribes nigrum) seed oil, cold-pressed, CAS 68606-81-5.” - “GLA 15.0–20.0%, ALA 12.0–15.0% and linoleic acid 40.0–50.0% of total fatty acids by GC.” - “Identity confirmed by the full GC profile against a certified FAME standard.” - “Free fatty acid ≤0.50%; peroxide value ≤5.0 meq O₂/kg; moisture ≤0.1%.” - “Heavy metals and microbiology as listed on the certificate.” - “Sterol and tocopherol profile on request where the source is disputed.” - “Destination and process agreed in writing before the first order.” ## Five questions for the supplier - What species and process does this lot come from, and which CAS number appears on its certificate? - Will you send the full GC profile with GLA, ALA and linoleic acid, not just the GLA percentage? - What are the free fatty acid and peroxide values for this lot, and when was it pressed? - Can you provide the sterol and tocopherol profile if the source is questioned? - If we disagree about this lot, will you re-test the retained sample with us? If the supplier answers all five, the file is nearly complete; a single GLA figure leaves most of the question open. Catalog data sits on the black currant seed oil product page; the COA page explains how the certificate is laid out; the grades page compares the process routes; the level-four comparison sets out the evening primrose difference; the evening primrose profile is on its product page; the methods are indexed under analytical methods; and release is described on the quality page. ### 01 What the COA for glucose oxidase actually contains URL: https://nutrition.rainwoodbio.com/products/enzymes/glucose-oxidase/coa/ Reviewed: 2026-11-20 The certificate for a glucose oxidase lot reports activity, the conditions that define the unit, identity, loss on drying, heavy metals, microbiology and particle size. Activity is the line that needs the most context: the catalog figure comes from a peroxidase-coupled glucose assay, and the same powder reads differently at another pH, temperature or detection system. The first table is the catalog specification; the lot certificate is the evidence for a particular pack. In one lineA glucose oxidase figure is a rate from a coupled assay: the unit, the pH, the temperature and the peroxidase detection system have to travel with the number. ## Reading the certificate line by line Each line should stand on its own: the measurement, the method and the release limit. A row that says only “conforms” asks for trust without the evidence. There is no simple colour reaction or melting point that identifies the enzyme, so the identity line is the activity assay itself. CAS 9001-37-0 and EC 1.1.3.4 identify the enzyme, not the preparation in the drum; the certificate should also name the production organism, the carrier and the lot. Catalog release specification · glucose oxidase | Parameter | Method | Release limit | Appearance | Visual | Yellow to light tan, free-flowing powder | Glucose oxidase activity | Peroxidase-coupled glucose assay | ≥10,000 U/g | Identification | Activity assay | Conforms to the reference | Loss on drying | Gravimetric | ≤8.0% | Particle size | Sieve analysis | ≥95% through 80 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Enumeration and absence checks | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent An activity figure is a rate, so the method column is part of the result, not a footnote. The mesh is a finishing specification, and it can change when the mill changes without any change in the enzyme. ## One unit, and the conditions behind it One unit is the amount of enzyme that oxidises one micromole of β-D-glucose per minute under the conditions of the method. The catalog method is a glucose/peroxidase assay: glucose oxidase produces hydrogen peroxide, peroxidase uses it to oxidise a chromogen, and the laboratory follows the colour. The specification can be agreed at pH 5.1 and 25 °C, which is the common definition, but the certificate has to print the values it actually used, because a rate at 30 °C is not the rate at 25 °C. The coupling adds its own conditions. The glucose concentration must be high enough to keep the enzyme saturated, the peroxidase must not be limiting, and the chromogen sets the wavelength. A laboratory that changes the chromogen has changed the method. Glucose oxidase acts on the β-anomer of glucose, so the assay also depends on mutarotation; a reading taken before the anomers equilibrate can be low. Activity is reported per gram of powder as sold. If a lot reads 10,000 U/g as-is with 8.0% loss on drying, the dry-basis figure is 10,870 U/g; both describe the same powder, and anyone comparing them is comparing denominators. A specific activity figure, U per milligram of protein, belongs on a separate line and needs a named protein method. ## The limit, the result and the evidence A release limit marks the boundary; the batch result records what the laboratory found. They need separate columns, with the method beside them. If the result column repeats the specification, it reports the gate, not the measurement. How a batch result should be reported | Parameter | Release limit | Expected result | Activity | ≥10,000 U/g | The measured U/g, with conditions and moisture basis | Identification | Activity assay conforms | The activity result, with the method | Loss on drying | ≤8.0% | The measured percentage for the lot | Heavy metals | Per element | Each metal reported separately in mg/kg | Microbiology | Counts and absence | The count and the absence result The limit is a floor, not a target. A lot at 10,500 U/g and one at 24,000 U/g both clear it, yet they will not behave the same after a hot blend or a week in solution. The measured value shows how much margin the lot carries. Ask for the assay's repeatability too; a result just above the floor is a thin cushion if the method varies by several per cent. Identification by activity is a conclusion drawn from the same number; if the result is disputed, the protein pattern and the preparation description are the next layer. ## What moves between batches Fermentation and recovery decide the protein mixture; standardisation then adjusts the final powder to a target activity with a declared carrier. Two concentrates of different strength can therefore leave the plant at the same U/g. The practice is routine, but only if the carrier is on the specification and the assay is run after standardisation, not before. The dryer and the mill are the next variables. Heat in either step can strip activity while the lot still clears the release limit; moisture shifts the as-is figure but not the enzyme itself. Colour is the least quantitative line: a tan shift can follow a longer dry or a different carrier, and it is not proof of damage. Read the direction across several lots rather than one result at the limit: the assay drifting low, moisture creeping up, or an extra protein band are more informative than a single pass. Certificate, pouch, drum and retain should share a lot code. ## When an outside laboratory is justified An outside test is worth ordering for an unfamiliar source, a first delivery to a regulated market, a disputed activity figure, or a label value that rests on the result. The useful panel is limited: activity on the retain by the named method, protein and specific activity, moisture, ICP-MS metals, microbiology, and a catalase check if peroxide accumulation matters. The laboratory has to match the specification's pH, temperature, glucose concentration and detection system; otherwise the comparison is between methods, not powders. Ask for the limit of detection behind each screen and the accreditation scope behind the activity method. “Not detected” is a statement about the method unless a limit is given. Traceability decides whether the test has weight: the sample should be the retain, the report should quote the lot code, and a referee should receive the retain and the specification. Repeating the same assay adds a number, not an answer; the useful second test separates inactive enzyme from a diluted powder. ## What to compare between suppliers Put six rows side by side: source organism and CAS number; activity and its full unit definition; protein or specific activity; moisture and carrier; metals and microbiology; pack, lot and storage. Two offers that agree on U/g but differ on pH or detection are not the same powder. The second layer is traceability: who made the lot, from which organism and with which carrier. Catalog values are on the glucose oxidase product page. The tests are on the identity page, the grade options on the grades page, the assay logic in the methods library, and the release workflow on the quality page. ### 02 Glucose oxidase grades: activity, carrier and source URL: https://nutrition.rainwoodbio.com/products/enzymes/glucose-oxidase/grades/ Reviewed: 2026-11-20 Glucose oxidase is bought as a number of units per gram, and that number means little without the assay behind it. The catalog version is a yellow-tan powder at ≥10,000 U/g by the glucose/peroxidase method, milled to pass 80 mesh. Granulation, the production source and the physical form all alter the powder that arrives, even when the label still says glucose oxidase. In one lineA glucose oxidase grade is an activity plus a carrier and a source; the U/g figure and its assay conditions decide what the powder can do. ## What a grade actually fixes Three decisions hide behind the word grade: how much activity is in each gram, what else is in the powder, and which organism made the enzyme. The first is the number on the certificate; the other two explain why two powders with the same U/g can behave differently in a blend or a solution. Activity is not the same as purity. A preparation can be diluted with a carrier and keep its specific activity if the carrier is not protein, while a lot with plenty of inactive protein can carry a normal U/g figure and a low specific activity. The protein figure and the assay conditions are the second half of the description. The production organism matters because the protein, its pH profile and its response to heat are not identical across sources. A specification that names only “glucose oxidase” leaves the source open, and a change of source is a change of material, not a new lot of the same thing. ## The catalog grade and its versions Catalog powder and granulated glucose oxidase | Attribute | Catalog powder | Granulated (on request) | Activity | ≥10,000 U/g | Set per order; the binder adds mass | Particle size | ≥95% through 80 mesh | Coarser, set by the granulation | Flow and dust | Free-flowing, some fines | Better flow, less dust | Added material | None declared | Binder or granulation aid | Typical use | Rapid dispersion and dry blends | High-speed filling and dust control The table is about physical handling, not about a stronger or weaker enzyme. Granulation changes the particle build and adds a binder. If a custom grade is diluted on a carrier, the units in each gram fall and the carrier must appear in the allergen and ingredient review. Neither change is a way to make the enzyme work better; they are ways to make it easier to weigh or blend. ## Powder, granule and solution behaviour At 80 mesh the powder is fine enough to disperse quickly, and fine enough to dust. Yellow to light tan is the catalog appearance; the colour can move with the drying step and the carrier without a change in activity. In water the powder gives a clear to slightly turbid solution. The fine fraction carries static and can cling to the weighing boat, so a containment step is sensible. Granulation trades fineness for flow. A granule is easier to feed into a high-speed blender and generates less airborne dust, but it dissolves more slowly and brings a binder into the formula. If the powder is diluted on a carrier, the bulk volume per unit of activity rises; a fixed fill weight then delivers fewer units unless the weight is raised. The carrier also brings moisture, particle size and a label name. The catalog moisture limit is ≤8.0%. It is a release limit for activity retention, not an invitation to store the powder in a humid room. ## Dose arithmetic before the label Work from the units the process needs, then convert to powder. At 10,000 U/g, a 250 mg scoop carries 2,500 U, a 600 mg scoop carries 6,000 U, and 2 g carries 20,000 U. At 5,000 U/g the same 2,500 U needs 500 mg. These are conversions, not recommended doses. For a food process the target is normally expressed per kilogram of substrate or per litre of liquid, and the trial establishes it. For a dry blend, the target is units per batch. In both cases the activity method must match the method used to set the target; a number from a different pH or chromogen is not a drop-in. An overage belongs to the stability file. If the enzyme loses activity over the declared period, the formulator may add extra at the start so the end-of-life figure holds. That decision changes the weigh-up and the label, and it cannot rescue a grade that is physically wrong for the line. ## What to write into the specification - “Glucose oxidase, EC 1.1.3.4, CAS 9001-37-0; production organism stated.” - “Activity ≥10,000 U/g by the glucose/peroxidase method; pH, temperature, glucose concentration and detection system stated.” - “Protein or specific activity reported, with the protein method.” - “Loss on drying ≤8.0%; ≥95% through 80 mesh.” - “Carrier or granulation aid disclosed; say so when none is present.” - “Heavy metals and microbiology per the catalog; storage condition and retest period.” - “Source, carrier and physical form under change control.” A specification that omits the method or the source is a label, not a purchase specification. The product page has the catalog values; the COA page shows the release lines; the level-four comparison separates the units from catalase; the stability page covers the loss that justifies an overage. ## When a version is the wrong choice Choose the fine catalog powder when the process needs rapid dissolution and can control dust. Choose a granule when flow and dust are the limiting problems and a slower dissolve is acceptable. None of these is right if the customer's specification names a different mesh, a different source or a carrier-free material. Matching U/g does not make two grades interchangeable, and a change of source or carrier needs a new specification and a label check, not a note on the purchase order. The catalog entry and the quality page are the place to start that change discussion. ### 02.1 Glucose oxidase vs catalase: two oxidoreductases, two units URL: https://nutrition.rainwoodbio.com/products/enzymes/glucose-oxidase/grades/glucose-oxidase-vs-catalase/ Reviewed: 2026-11-20 Glucose oxidase and catalase are both oxidoreductases, but they act on different molecules. Glucose oxidase oxidises β-D-glucose and oxygen to D-glucono-1,5-lactone and hydrogen peroxide; catalase decomposes hydrogen peroxide to water and oxygen. Their units come from different assays and cannot be converted, so a blend is two specifications, not one stronger ingredient. In one lineGlucose oxidase consumes glucose and oxygen to make hydrogen peroxide; catalase consumes that peroxide, so their units describe different reactions and do not convert. ## Two reactions, one after the other Glucose oxidase is a flavoprotein: its FAD cofactor takes electrons from β-D-glucose and passes them to oxygen, producing hydrogen peroxide. The lactone product hydrolyses to gluconic acid in water, which is why some methods report glucose consumed and others report acid formed. Catalase is a heme enzyme: it splits hydrogen peroxide into water and oxygen, two molecules of peroxide giving two of water and one of oxygen. The two reactions and their enzymes | Enzyme | Substrate | Products | EC number | CAS number | Glucose oxidase | β-D-glucose and oxygen | D-glucono-1,5-lactone (to gluconic acid) and hydrogen peroxide | 1.1.3.4 | 9001-37-0 | Catalase | Hydrogen peroxide | Water and oxygen | 1.11.1.6 | 9001-05-2 The two reactions connect: glucose oxidase makes the substrate that catalase removes. Neither enzyme performs the other's reaction. Glucose oxidase does not remove peroxide, and catalase does not oxidise glucose. The connection is why the two are sometimes used together, and why their assays interfere when both are present. ## Why 10,000 U/g means two different things One glucose oxidase unit is the amount that oxidises one micromole of β-D-glucose per minute in the peroxidase-coupled assay; the specification can be agreed at pH 5.1 and 25 °C. One catalase unit clears one micromole of hydrogen peroxide per minute at pH 7.0 and 25 °C; the decrease is read at 240 nm at a stated starting concentration. Both units equal 16.67 nkat as a rate, but the mole refers to a different substrate and the assays use different conditions. The conditions are not decoration. A glucose oxidase result at pH 6.0 is not the result at pH 5.1, and a catalase result at a higher starting peroxide concentration can be lower because the enzyme is inhibited by its own substrate. A “total oxidoreductase units” figure that adds the two has no method behind it. Ten thousand units of glucose oxidase per gram and ten thousand units of catalase per gram are two unrelated quantities. Most enzyme units are rates on a named substrate; the same rule applies to a protease on a protein substrate or a lysozyme on a bacterial suspension. The analytical methods library explains why the assay defines the unit. ## How each number is produced The glucose oxidase method is indirect. The enzyme generates hydrogen peroxide, peroxidase uses it to oxidise a chromogen such as ABTS or 4-aminoantipyrine, and the laboratory follows the increase in absorbance at the wavelength of that chromogen. The coupling is convenient and it adds failure modes: catalase in the sample consumes the peroxide before the chromogen sees it, reducing agents and coloured components interfere, and turbidity adds apparent absorbance. The glucose concentration must be saturating, and the reading must allow for mutarotation of the β-anomer. The catalase assay is direct: buffer at pH 7.0, a known starting peroxide concentration, and the decrease in absorbance at 240 nm as the peroxide is consumed. Read only the linear part of the curve; at a high starting concentration the enzyme can be inhibited and the plot bends. A blank corrects for the powder's own absorbance. ORAC and DPPH are chemical radical-scavenging assays, not enzyme assays. Neither result can be converted into units of glucose oxidase or catalase, and neither says whether the enzyme in the powder is active. The quality page describes the release workflow. ## What a blend can and cannot do A blend of the two is a formulation. In the dry powder the reaction waits for water; once dissolved, glucose oxidase generates peroxide and catalase removes it, and the ratio between the two activities sets how much peroxide remains. If the target is glucose conversion with little peroxide left, catalase can be part of the design; if the target is peroxide, catalase is a side activity that has to be limited. The application decides, not the unit number. The two enzymes also have different pH optima, near 5.5 for glucose oxidase and near 7.0 for catalase, so one matrix pH cannot be the optimum of both. Measure each activity on the finished blend rather than calculating it from the weigh-up; the two proteins can decline at different rates through blending and storage. A certificate that gives one combined enzyme activity has specified neither component. A protease in the same blend can break down either enzyme, and an overage calculated on the blend total will not protect the component that is losing activity fastest. ## What to write into the specification - “Glucose oxidase (EC 1.1.3.4), CAS 9001-37-0; catalase (EC 1.11.1.6), CAS 9001-05-2; each source named.” - “Glucose oxidase ≥10,000 U/g by the glucose/peroxidase assay, with pH, temperature, glucose concentration and detection system.” - “Catalase ≥10,000 U/g by the UV hydrogen-peroxide assay at 240 nm, with pH, temperature and starting peroxide concentration.” - “Each activity assayed separately on the blend; the ratio declared.” - “Carrier, stabiliser and granulation aid declared; no combined activity figure.” - “Loss on drying, heavy metals, microbiology and particle size as listed.” - “Storage condition and retest period stated for each enzyme in the blend.” A specification written this way can be released against. A single “enzyme activity” line cannot. ## Choosing one, the other, or both Choose glucose oxidase when the target is glucose or oxygen and the hydrogen peroxide it produces is acceptable, useful or removed downstream. Choose catalase when the target is hydrogen peroxide and the glucose reaction is irrelevant. If both reactions are wanted, name both enzymes and measure each; a U/g figure from one is not evidence for the other. Do not convert one enzyme's units into the other's, and do not offer a chemical antioxidant result as proof of either activity. The glucose oxidase product page and the catalase product page carry the catalog values; the glucose oxidase grades page covers the single-enzyme choice; the methods library and the quality page cover the assays and release. ### 03 Glucose oxidase stability: heat, moisture and the pack URL: https://nutrition.rainwoodbio.com/products/enzymes/glucose-oxidase/stability/ Reviewed: 2026-11-20 The activity of glucose oxidase declines when the powder takes up water or sits in a warm place, and it declines faster once the enzyme is dissolved. A sealed, dry pack is the stable format; a solution is the format that loses units first. The retest period is therefore a property of the pack and the storage condition, not of the catalog number. In one lineGlucose oxidase loses units before it changes appearance, and moisture plus heat are what remove them; the pack and the storage condition set the retest period. ## The powder: moisture, heat and colour The catalog loss on drying is ≤8.0%, and that number is measured at release. It is not a reserve that the powder can spend in storage. An opened pouch exchanges water with the room; the powder's as-is activity drops, the particles may stick together, and the yellow-tan colour can darken. A dry store and a pack that closes properly are part of keeping the specification, even though they do not appear on the COA. Light matters less than moisture and heat for this enzyme, but an opaque pack is still the sensible choice. Keep the pouch closed between weighings, let a cold pack come to room temperature before opening it, and do not leave material in a clear jar on a bench. A warm loading bay or a vehicle in summer is enough to move the activity. The micro count is a release result, not a promise about an opened pack; moisture makes the powder a friendlier environment for whatever background flora it carries. ## The solution: the least stable format Dissolved glucose oxidase is exposed to four things at once: pH, temperature, peroxide and time. The enzyme works in the acidic range, and its activity falls as the pH moves away from that window; the supplier's data for the source is a better guide than a generic number. When glucose is present, the enzyme makes hydrogen peroxide, and the peroxide can in turn damage the enzyme. The reaction therefore slows itself in a concentrated solution unless the peroxide is removed. A catalase side activity, or catalase added to the formula, changes the peroxide level and therefore the assay as well as the process. Thermal treatment adds a second loss path. Pasteurisation or hot fill adds a heat load that a dry powder never sees. A stick pack avoids that step if water is added only at the point of use. For a liquid, the hold time and the process temperature have to be validated with activity measurements, not assumed from the powder data. ## What drives degradation Conditions that reduce glucose oxidase activity | Factor | Effect | Control | Heat | Unfolds the protein; faster in solution | Cool store and process | Moisture | Raises loss on drying; lowers as-is activity; caking | Sealed pack; desiccant; dry room | pH | Moves the enzyme off its working optimum | Measure and buffer the matrix | Hydrogen peroxide | Product inhibition and inactivation | Limit build-up; catalase if appropriate | Metal ions | Inhibit the enzyme and affect colour | Avoid bare copper and iron | Microbial growth | Counts increase in a wet pack or liquid | Control water activity; validate the hold The factors reinforce each other. A warm humid pack is worse than a dry warm pack or a cool humid one, and a glucose solution at the wrong pH brings substrate, peroxide and heat together. The question to ask is not whether the enzyme is stable in general, but what it does in a named pack under a named condition over a named time. ## A stability protocol for the ingredient Write the protocol around the pack that will be sold. A warehouse study normally uses 25 °C/60% relative humidity for the long term and 30 °C/65% for the intermediate condition; 40 °C/75% is the accelerated arm that stresses the pack. Add a solution arm at the process pH and temperature if the customer will dissolve the enzyme. At each point, measure activity by the same method, loss on drying, appearance and microbiology. Show the numbers rather than a pass line, and identify the pack and the lot family. A result from a drum does not describe a pouch; the headspace and the opening history are different. ## The finished formula changes the answer A dry blend is not inert. If the carrier or another excipient contains glucose and the blend picks up moisture, the enzyme can begin to produce peroxide inside the pack. That peroxide can attack flavour and colour and reduce the enzyme's own activity. A non-reducing carrier, a low water activity and a defined order of addition reduce the risk, and the blend should be tested as a blend. A sachet adds a seal to the problem: a pinhole is enough to admit moisture, so the strip is checked as well as the powder. A tablet adds compression and excipients. None of these formats inherits the bulk pouch's retest period. If catalase is also present, the two activities can drift apart during storage; that is another reason to assay the blend rather than calculate the ratio from the weigh-up. ## How the shelf life is set There is no single shelf-life figure for glucose oxidase. The retest period is assigned to a pack and a storage condition on the basis of stability data, and it belongs on the specification. A number without those three pieces is not a shelf life. At the end of the period, re-assay the retain before extending use. Do not extend by default, and do not apply a drum result to a repacked pouch. Standard packs are listed on the product hub; the release tests are shown on the COA page; packing and lead time sit on the MOQ page; assay methods are in the methods library; release is documented on the quality page. ### 04 Glucose oxidase: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/enzymes/glucose-oxidase/moq/ Reviewed: 2026-11-20 One kilogram is the minimum order: it ships as a single foil pouch, while production volumes use a 25 kg fiber drum. Standard dispatch takes 1–7 days from order confirmation. Because activity defines the product, a quotation is only comparable when the unit definition, the pack, the destination and the documents are stated with the quantity. In one lineThe 1 kg pouch is the smallest traceable unit: it covers a bench trial, an independent activity check and a retained sample from the same lot. ## Why the minimum is one kilogram The 1 kg pouch is the smallest unit that can be treated as a lot. It provides enough material for a bench trial, a retained sample and a referee activity test, and it travels as a parcel rather than a pallet. That matters when a formulator is still deciding the process and does not want to commit to a drum. A split below 1 kg is a repack. The powder leaves its original pack, acquires a new handling record and loses the direct link between the lot code and the container. The 25 kg drum reduces handling per kilogram, but it also commits inventory and storage time. The minimum is set by the pack, not by the volume. ## Packs and formats Glucose oxidase pack options | Pack | Contents | Use | What changes | Foil pouch | 1 kg | Trial, sample, small run | Close tightly after use | Fiber drum | 25 kg | Production | Lined drum; code on liner and body | Granulated | On request | Better flow, less dust | Binder and particle build The catalog material passes 80 mesh at ≥95%. Granulation is a separate specification rather than a pack size: it adds a binder. Raise it before the quotation, because the process step can change the dispatch date. ## Lead time and dispatch Dispatch falls inside 1–7 days of order confirmation. Picking, paperwork and handover to the carrier are in that window; freight, customs and the customer's own release are outside it. A non-standard granulation or a special pack is scheduled separately and should appear as its own line on the quotation. Ask for a date rather than a range. The 1 kg pouch normally travels as a parcel and the drum on a pallet, so the Incoterm and the receiving address decide the freight. Lot documents should be in the same shipment as the material; a COA that arrives after the drum delays release. ## What a quotation needs Six fields make two offers comparable: - Activity and method. Glucose oxidase at ≥10,000 U/g, with the pH, temperature, glucose concentration and detection system. - Pack and quantity. 1 kg pouch, 25 kg drum, or granulated. - Specification. Loss on drying, particle size, heavy metals, microbiology and carrier. - Destination and Incoterm. Country, delivery point and trade term. - Intended use and market. Food processing, a dry blend or another use, and the country of sale. - Documents. COA, TDS, SDS, source organism, carrier, allergen and GMO statements. A quantity without the activity method is not an offer that can be compared; a destination without the use is not enough to check the file. The quotation should carry both. ## Qualification starts with one pouch The 1 kg pouch is the qualification lot. Run activity, loss on drying and microbiology on it, and keep a portion from the same pouch as the retain. The lot code on the pouch, the certificate and the quotation should agree. A sample without that link is a demonstration. If the trial needs less than a kilogram, the material is cut from a bulk lot and put into a new container. That split needs its own record and lot code, and it should be requested in writing. The bench powder and the production powder may then come from different lots even when both meet the same specification. Re-test on arrival if the parcel has been through a hot depot; the release activity is not guaranteed to survive the journey. ## Terms to settle before the first order Put the commercial and quality terms in one document before the first production order: Incoterm, pack, dispatch window, specification revision, one COA per lot, retained sample, retest period and the change-control route. These are easier to agree while both sides are still deciding than after a complaint. Agree what happens if a lot fails. The starting point is the retain and a joint assay by the named method, not a photograph. Name the referee laboratory, say who pays for it, and decide in advance which result both sides will accept. Appearance alone is a poor basis for a return. The product hub carries the catalog specification; release tests are listed on the COA page; the compliance page covers the market files. The MOQ glossary entry defines the term, and the logistics page covers freight and documents. ### 05 The regulatory file for glucose oxidase URL: https://nutrition.rainwoodbio.com/products/enzymes/glucose-oxidase/compliance/ Reviewed: 2026-11-20 Glucose oxidase is supplied as a food enzyme preparation, not as a single chemical. The regulatory file therefore has to describe the enzyme, the production organism, the carrier and the intended use, as well as the lot certificate. The buyer's regulatory team confirms the route for the destination and for the finished product. In one lineThe specification states the enzyme preparation; the regulatory file states the source, the carrier, the use and the market that permits it. ## What the file contains Four parts have to align: the specification revision, the lot certificate, the use and the destination. The certificate records the lot; the technical data sheet states the specification; the safety data sheet covers handling. None of the three decides the market route, which is a separate part of the file. An enzyme preparation is the enzyme plus the carrier, stabiliser and diluent that carry it. That is why the file names the production organism, the fermentation and recovery steps, the carrier and the activity method. A carrier can be the part that triggers an allergen declaration, and the source organism can be the part that triggers a GMO question. Neither is visible in a U/g figure. Keep a versioned index at the front of the folder and note any missing statement before the order moves; a gap is easier to fix before the order than at the border. ## European Union The EU regulates food enzymes separately from food additives. Regulation (EC) No 1332/2008 is the framework; the Union list and its conditions are the reference, and the buyer checks the current text for the enzyme and the use. National rules can still apply where the Union list does not cover a use, so the destination country is part of the question. Under Regulation (EU) No 1169/2011, food enzymes used as processing aids are generally not declared in the ingredient list when they have no function in the final food, but a carrier can be declarable, and the labelling rule is checked against the actual recipe. Contaminants are governed by Commission Regulation (EU) 2023/915 on maximum levels, as of this review; the GM status of the production organism is a separate question under Regulation (EC) No 1829/2003, and novel-food status is checked under Regulation (EU) 2015/2283 if the history is not established. The EU notes gather the framework texts. ## United States In the US, the route depends on the intended use. Under the Federal Food, Drug, and Cosmetic Act, a food enzyme preparation is used under a GRAS basis, a prior sanction or an applicable food-additive regulation for the specific use; the supplier names the basis it relies on, and the buyer confirms that the basis covers the finished food and the use level. An enzyme sold as a dietary ingredient follows the dietary-supplement route, including any new-dietary-ingredient question, which is a separate file. Labelling follows the same split. Under 21 CFR 101.100, a processing aid that has no technical effect in the final food is generally exempt from the ingredient list, while a carrier or a residue that does function may need a declaration. Structure/function wording is assessed separately, with substantiation and the required disclaimer; the certificate does not cover it. ## Contaminants and limits The catalog limits are the supplier's release gates; the destination's contaminant limits apply to the finished food and are calculated from the use level. The table lists the catalog values to carry into that calculation. Catalog contaminant limits for glucose oxidase | Parameter | Catalog limit | What the file should show | Lead (Pb) | ≤3 mg/kg | Lot result, method and the finished-food calculation | Arsenic (As) | ≤2 mg/kg | Lot result and method | Cadmium (Cd) | ≤1 mg/kg | Lot result and method | Mercury (Hg) | ≤0.1 mg/kg | Lot result and method | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Counts plus the absence statements for the lot The calculation uses the actual use level, not a default. A very low use level can make the contribution small, but the arithmetic still belongs in the file. For microbiology, the evidence combines a count with an absence result; a single “passes” line is a conclusion, not a measurement. ## Claims and label language Glucose oxidase activity is a technical specification, not a health claim. The technical file describes what the enzyme does in the process, such as oxygen removal or glucose conversion. Whether the finished product may repeat that description as a claim, and in which words, is a separate decision for the destination rules and the buyer's reviewer. No disease-related claim follows from an activity figure. “Preservative” is a regulated term in some markets, and “antioxidant” can be a claim as well as a chemistry description. Neither should be used loosely on a label because the enzyme acts on oxygen or peroxide in an assay. A GMO or allergen statement is a declaration, not a claim, and it belongs in the file even when the label does not show it. ## Documents for the file The file needs the COA with the activity method and conditions, loss on drying, the metal panel and the micro results; the TDS with the specification version; the SDS for handling; and a specification that names the enzyme, the source organism and the carrier. Add the origin record, the allergen statement for the carrier, the GMO statement for the production organism, and any residual-solvent statement for the recovery process. The activity method is part of the document set, not only a number: the pH, temperature, glucose concentration and detection system have to be readable by the buyer's laboratory. If a customer needs a statement that the preparation is food grade, that statement is built from these documents, not added in place of them. ## Checks before ordering - The specification revision names CAS 9001-37-0, EC 1.1.3.4 and the activity method. - Production organism, carrier and the allergen and GMO statements are on file. - The COA lot matches the pack, and the activity conditions are stated. - Contaminant results are converted to the finished-food use level. - The intended use and the destination route are confirmed by the buyer's regulatory team. - The label and any claim have been reviewed, and source, carrier and form are under change control. The catalog entry holds the specification; the certificate page explains the lot report; the identity page covers the analytical evidence. Assay descriptions sit in the methods library; the release file is explained on the quality page; the regulatory notes gather the framework texts. ### 06 How we prove a glucose oxidase lot is glucose oxidase URL: https://nutrition.rainwoodbio.com/products/enzymes/glucose-oxidase/identity/ Reviewed: 2026-11-20 A glucose oxidase lot is the named enzyme when the activity assay, the protein pattern and the preparation description agree. The activity proves the reaction, the protein pattern shows the enzyme, and the carrier, source and moisture explain the rest of the powder. An activity figure alone can be matched by a dilution, a different source or a heat-damaged lot. In one lineIdentity is an activity plus a protein and a preparation: the assay proves the reaction, the protein pattern shows the enzyme, and the carrier explains the rest of the powder. ## The identity chain A certificate can carry the right name and still say little about the powder. Each layer below answers a different question, and each needs its own result. A supplier who replies only with the document has repeated the label, not tested the material. Identity checks from paperwork to powder | Check | Question | Method | Evidence | Document | Is the enzyme named? | Name, CAS number, EC number, source | Paperwork only | Activity | Is the reaction glucose oxidase? | Peroxidase-coupled glucose assay | The reaction, not the protein | Protein | Is the enzyme protein present? | Protein assay, SDS-PAGE, specific activity | The protein, not the activity alone | Preparation | What else is in the powder? | Carrier, loss on drying, metals, microbiology | The powder as sold The layers answer different failures. A carrier dilution passes the document layer and shows up in the activity and preparation layers; a heat-damaged lot passes the document and protein layers and fails the activity layer; a carrier that was not declared passes the activity layer and fails the preparation layer. ## Specific activity and the catalase ratio Specific activity, in units per milligram of protein, is the ratio that separates active enzyme from the rest of the powder. A carrier dilution lowers U/g and may leave the specific activity unchanged; inactive protein lowers U/g while keeping the protein figure normal, so the specific activity falls. The protein method matters: Bradford, BCA and Kjeldahl do not give the same denominator, and the specification should name the method and the standard. The second ratio is the catalase side activity. Glucose oxidase preparations can carry catalase, which destroys the hydrogen peroxide the coupled assay depends on and depresses the apparent glucose oxidase result. Report catalase U/g and the ratio of catalase to glucose oxidase. A high ratio is not automatically a defect: it matters when the application depends on peroxide accumulation, and it is a lot-consistency number in every case. The reaction stoichiometry gives a third check. One molecule of glucose yields one molecule of hydrogen peroxide; a peroxide assay that recovers less than the activity predicts points to catalase or another peroxide consumer in the powder. ## X-ray diffraction: a carrier check, not an enzyme test Glucose oxidase is an amorphous protein, so X-ray diffraction gives a broad halo rather than a sharp pattern. XRD cannot identify the enzyme and cannot measure its activity. It can, however, show a crystalline carrier or a crystalline additive: lactose gives sharp peaks, and a powder declared carrier-free that shows a crystalline pattern has something in it that the specification did not name. The useful question is therefore not “does the pattern match glucose oxidase?” but “does the pattern match the declared preparation?”. Before accepting a statement that the pattern matches, ask for the reference and the detection limit. For this product XRD is not a release test, and a claim of conformity without the pattern adds nothing measurable. The method is described in the XRD method note. ## What adulteration looks like How substitutions show up in the data | Adulterant | Effect | Signal | Method | Carrier dilution | Lowers U/g and enzyme per gram | Activity low; carrier declared | Activity, protein | Inactive protein | Keeps protein high, activity low | Specific activity low | Protein assay, SDS-PAGE | Heat-damaged enzyme | Loses units without changing the protein | Activity low; no recovery | Activity re-test, batch record | Catalase side activity | Consumes peroxide; depresses the coupled assay | Catalase U/g high; ratio shifted | Catalase assay | Crystalline sugar or salt | Adds mass; lowers activity per gram | Sharp XRD peaks; moisture or ash shift | XRD, loss on drying Colour is the weakest signal. Yellow to light tan covers a wide range, and a heat-damaged lot can keep the same colour while losing units. The stronger signals are the activity, the protein figure and the declared carrier. A certificate that reports appearance and activity but no protein or preparation data leaves the most likely substitution unchecked. ## Writing identity into the specification - “Glucose oxidase (EC 1.1.3.4), CAS 9001-37-0; production organism named.” - “Activity ≥10,000 U/g by the glucose/peroxidase assay, with pH, temperature, substrate and detection system.” - “Identification by activity assay and protein pattern; report both.” - “Specific activity in U/mg protein, with the protein method named.” - “Catalase side activity reported, with the catalase to glucose oxidase ratio.” - “Loss on drying ≤8.0%; particle size ≥95% through 80 mesh.” - “Carrier and source named; heavy metals and microbiology as listed.” An identity specification written this way can be checked by a second laboratory. A list of names and a U/g figure cannot. ## Five questions for the supplier - Which production organism and strain are used, and which CAS and EC numbers are on the certificate? - What is the activity result, and what were the pH, temperature, glucose concentration and detection system? - What is the protein content and specific activity, and which protein method was used? - What catalase activity is present, and what is the catalase to glucose oxidase ratio? - If a result is challenged, will you share the retain for a joint re-test under the named method? Five clear answers build an identity file; one activity number does not. Catalog values sit on the product hub; the COA page shows where each number belongs on a certificate; source and carrier options are compared on the grades page; the level-four comparison explains how catalase relates; assays are described in the methods library; release is covered on the quality page. ### 01 What a hemp seed oil COA actually reports URL: https://nutrition.rainwoodbio.com/products/fatty-acids/hemp-seed-oil/coa/ Reviewed: 2026-11-20 A certificate for a hemp seed oil lot has to answer two questions on one page: is the oil Cannabis sativa seed oil, and is it still fresh? The first is settled by the GC fatty-acid profile — linoleic acid, alpha-linolenic acid (ALA), oleic acid and the small gamma-linolenic acid (GLA) peak — and the second by free fatty acid, peroxide value and moisture on the same lot. The limits below are the catalog specification; the batch COA is the record for the bottle or drum in front of you. In one lineThe hemp certificate is read as a profile, not a single marker: linoleic and ALA by GC, the GLA peak that separates hemp from flax, and free fatty acid and peroxide value on the same lot. ## The certificate as a lot report Hemp seed oil is not specified by one marker. The linoleic window is 50.0–60.0% and the ALA window 15.0–25.0%, so two conforming lots can differ widely. A certificate that prints only ALA has described half the oil; the full profile, including the GLA peak, is what places the lot. Identification asks whether the whole profile is consistent with cold-pressed seed oil of Cannabis sativa L.; the linoleic and ALA rows ask how much of each acid the lot carries. Identity, composition and condition · cold-pressed hemp seed oil · CAS 89958-21-4 | Parameter | Method | Release limit | Appearance | Visual | Clear to slightly hazy oil, greenish-yellow to golden | Identification | GC of fatty acid methyl esters against a reference profile | Profile conforms | Linoleic acid (C18:2 n-6) | GC-FAME | 50.0–60.0% | Alpha-linolenic acid (C18:3 n-3) | GC-FAME | 15.0–25.0% | Oleic acid (C18:1 n-9) | GC-FAME | 10.0–20.0% | Free fatty acid (as oleic) | Titration | ≤0.50% | Peroxide value | Iodometric titration | ≤5.0 meq O₂/kg | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent GLA belongs in the chromatogram even though it is not a release limit: cold-pressed hemp oil normally carries 1–4%, and its presence is evidence that the oil came from hemp seed rather than a linoleic-rich blend. ## The GC basis: total fatty acids, oil mass and the C18:3 pair Fatty-acid results come from transesterification to methyl esters and capillary gas chromatography with flame-ionisation detection. The percentage can be reported as area per cent or as weight per cent after response-factor correction; the two do not agree exactly, and the certificate should name the basis, the column and the standard. The chromatogram should travel with the result when identity is disputed. The C18:3 position carries more weight in hemp than in most seed oils. Alpha-linolenic acid (C18:3 n-3) and gamma-linolenic acid (C18:3 n-6) share a carbon count and a molecular mass, and a short or weakly polar column can merge them into one peak. A method that does not resolve both cannot prove the ALA figure or the GLA presence. The report should show the pair separated, alongside palmitic and stearic acids. The oil basis is a second conversion. A 55.0% linoleic result on total fatty acids is about 520 mg per gram of oil once the glycerol fraction is allowed for, because a triglyceride is roughly 95% fatty acids by mass. A label or blend calculation that reads the percentage as per gram of oil overstates the fatty acid delivered, so the certificate should state whether the figure is on total fatty acids or on oil mass. ## Release limit versus batch result The release limit is the acceptance boundary and the batch result is what the laboratory measured; both belong on the page in separate columns, with the method beside them. Free fatty acid reflects hydrolysis, which needs water; peroxide value reflects the first stage of oxidation, which needs oxygen and is accelerated by light and heat. An oil can pass both at release and still arrive stale if the bottle was warm and half empty. What the result column should contain | Parameter | Release limit | Result column | Free fatty acid | ≤0.50% as oleic | A measured percentage, with the titration method | Peroxide value | ≤5.0 meq O₂/kg | A measured figure in the stated units | p-Anisidine value | Not fixed in the catalog; agree at order | A measured figure against the agreed limit | Moisture | ≤0.1% | A measured percentage by Karl Fischer | Heavy metals | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | A figure per element, not a single total | Microbiology | Counts and absence tests | The count and the absence statement for the lot The anisidine value measures secondary aldehydes and can keep rising after the peroxide value has peaked. If the buyer needs a limit, it belongs in the specification for every lot. ## What moves between lots The cultivar, the seed lot, the season and the pressing temperature move linoleic and ALA inside the windows. Refining moves free fatty acid, colour and peroxide value far more than the profile, so a refined oil can report the same ALA as a cold-pressed oil and behave differently in a softgel. Chlorophyll varies with the seed and the press and shows up as colour. Peroxide value is the most variable line. It depends on the seed condition, the press temperature, the headspace and the time since production. A result close to 5.0 meq O₂/kg leaves little room for a warm warehouse, and the number on arrival can be higher than at release even when the pack was sealed. A trend across lots says more than one result near an edge; the lot code should tie the certificate to the pack and the retained sample. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a disputed ALA figure, a suspected blend, or an oil that smells stale on arrival. The panel is narrow: GC-FAME with the full profile and chromatogram, sterols and tocopherols when the botanical source is in question, FFA, peroxide and anisidine values, heavy metals and microbiology. Hemp material needs one more screen. A cannabinoid panel for delta-9-THC and CBD shows whether the lot is seed oil or a whole-plant extract blended into oil, and it supports the destination file where a THC limit applies. Ask for the limit of quantification with the result; a “not detected” line without a limit describes the method, not the oil. Keep the chain of custody intact, so the sample tested is the sample retained. ## What to compare between suppliers Put six lines side by side: species and plant part; the full fatty-acid profile with its basis; the GLA and cannabinoid results; free fatty acid, peroxide and anisidine values; the heavy-metal and microbiology results; and pack size with lot traceability. Two certificates that agree on ALA but disagree on linoleic, oleic or GLA are not describing the same oil. The catalog specification sits on the hemp seed oil product page. The tests that separate hemp seed oil from flaxseed oil and other oils that can imitate its profile are on the identity page; the process grades are on the grades page; the analytical methods are indexed under analytical methods; and lot release is described on the quality page. ### 02 Cold-pressed, refined or winterised: choosing a hemp seed oil grade URL: https://nutrition.rainwoodbio.com/products/fatty-acids/hemp-seed-oil/grades/ Reviewed: 2026-11-20 Hemp seed oil is bought by process grade, not by a single assay number. The catalog material is cold-pressed, unrefined oil with the seed's chlorophyll, colour and flavour intact; a refined grade is the usual alternative when a pale, mild oil matters, and a winterised grade sits between them for clarity. The grade decides the colour, the oxidation behaviour at release and the label wording, while the fatty-acid windows stay the same. In one lineThe grade is the press and finishing route: cold-pressed oil keeps the chlorophyll and the flavour, while refining and winterisation trade them for a paler, milder, clearer oil. ## Why one seed gives several grades Cold pressing crushes the seed at a moderate temperature without solvent, then filters the oil. The oil keeps its greenish colour from chlorophyll, its tocopherols and sterols, and its nutty, grassy flavour. The same route leaves a higher free fatty acid figure and a shorter tolerance for warmth than a refined oil, because nothing has been removed to stabilise it. Refining is a sequence. Neutralisation lowers free fatty acid, bleaching lowers colour and trace metals, and deodorisation strips volatile odour compounds under vacuum and heat. The result is a pale, mild oil with a low peroxide value at release. The same steps remove part of the tocopherol fraction, and a deodorisation run pushed too hard can create trans isomers. Winterisation is a separate finishing step. The oil is chilled so that waxes crystallise, then filtered; the clear oil that remains stays bright in a cold room. It is not refining, and it does not remove chlorophyll or the flavour. Organic is a certification and segregation question, not a process grade, and the powder on a carrier is a different delivery format with its own specification. ## The grades side by side Cold-pressed, refined and winterised hemp seed oil | Dimension | Cold-pressed, unrefined | Refined | Winterised | Process | Pressed and filtered; no solvent, no deodorisation | Neutralised, bleached and deodorised | Cold-pressed oil chilled and filtered to remove waxes | Colour and clarity | Greenish-yellow to golden; clear to slightly hazy | Pale yellow; bright | As the base oil, with less wax haze at low temperature | Flavour and odour | Nutty and grassy; the seed note is present | Mild and close to neutral | Close to the base oil; the wax note is reduced | Free fatty acid and peroxide | Depend on the seed and the press; catalog limits apply | Usually lower at release | Unchanged by the chill step | Minor components | Chlorophyll, tocopherols and sterols retained | Partly reduced by bleaching and deodorisation | Largely retained; some wax fraction removed | Label fit | Supports a cold-pressed or unrefined description | Fits a neutral-taste or pale-oil brief | Fits a clarity brief; not a refined claim Two quotations can differ by more than the ALA figure. A refined oil and a cold-pressed oil from the same seed lot can land in the same ALA window and behave differently in a softgel, an emulsion and a taste panel. ## Colour, chlorophyll and handling The catalog appearance is a clear to slightly hazy oil, greenish-yellow to golden. The green tone comes from chlorophyll carried through the press, and its intensity depends on the seed, the press temperature and the filtration. Chlorophyll is also a photosensitiser: it absorbs light and passes the energy to oxygen, so a green oil in clear glass ages faster than the same oil in amber glass. Haze in an unrefined oil is normal. Fine seed particles and waxes pass a coarse filter and settle slowly, and a cold store makes the wax fraction crystallise into a cloud that clears on warming. That cloud is a presentation issue, not a specification failure; winterisation is the grade that reduces it. Warm gently and mix before sampling rather than filtering cold. Handling belongs to the grade. Oxygen, light and warmth are the three variables, and a nitrogen blanket, an amber bottle and a cool store are part of keeping a cold-pressed oil at its release condition. ## Dose arithmetic and the dosage form The label arithmetic starts from the release profile. At 15.0% ALA, a gram of oil carries 150 mg; at 25.0% it carries 250 mg, so a 500 mg softgel carries 75–125 mg and a 1,000 mg fill carries 150–250 mg. Linoleic acid at 50.0–60.0% of total fatty acids is about 475–570 mg per gram of oil, and GLA at roughly 1–4% adds 10–40 mg. Those are the numbers that decide the fill weight and the servings per capsule. Declare from the lot result, not from the top of the range. If the certificate reports 18.4% ALA, the declared amount per capsule is based on 18.4%, with any overage decided by the brand's stability data. Declaring the ceiling against a lot near the floor is an error that a comparison of certificate and panel exposes. The dosage form follows the grade. A softgel fill or an oil blend takes the cold-pressed oil and accepts its colour and flavour; a clear beverage or a taste-sensitive chew needs the refined grade. A dry format needs the powder on a carrier, which is a separate product with its own oil load and ALA basis rather than a grade of the oil. The comparison with flaxseed oil is on the hemp versus flaxseed page. ## What to write into the specification - “Cold-pressed hemp seed oil, Cannabis sativa L. seed, CAS 89958-21-4.” - “Linoleic acid 50.0–60.0%, ALA 15.0–25.0% and oleic acid 10.0–20.0% by GC-FAME.” - “GLA reported as part of the profile, with the method that separates it from ALA.” - “Free fatty acid ≤0.50% as oleic; peroxide value ≤5.0 meq O₂/kg; moisture ≤0.1%.” - “p-Anisidine value at the limit agreed at order, if the buyer's specification includes it.” - “Pack: 1 kg amber bottle or 25 kg HDPE drum, sealed and nitrogen-flushed where agreed.” - “Lot number, production date and retest date on the pack and the certificate.” Write the grade and the fatty-acid windows as separate clauses. A specification that names only “hemp seed oil” leaves the supplier free to ship a refined oil to a cold-pressed brief, and one that fixes only the ALA figure leaves the oxidation question open. We supply the cold-pressed grade; refined or winterised oil is a separate purchase with its own specification. ## When another grade is the right purchase Cold-pressed is the wrong choice when the oil has to be pale, mild and stable on a warm shelf, or when the formula cannot carry the green note. Refined is the wrong choice when the label leans on a cold-pressed story, or when the tocopherol fraction is part of the nutritional case. Winterised is the wrong choice when the problem is oxidation rather than wax haze; clarity is not stability. The powder on a carrier is not a grade at all. It is a different specification with a declared oil load, and a switch to it changes the ingredient list and the mass per serving. The switch is a new purchase, not a packing change. The catalog specification is on the hemp seed oil product page. The release tests are on the COA page, the oxidation behaviour is on the stability page, the analytical methods are indexed under methods, and the release workflow is described on the quality page. ### 02.1 Hemp seed oil vs flaxseed oil: two ALA oils, two profiles URL: https://nutrition.rainwoodbio.com/products/fatty-acids/hemp-seed-oil/grades/hemp-seed-oil-vs-flaxseed-oil/ Reviewed: 2026-11-20 Hemp seed oil and flaxseed oil are both cold-pressed seed oils sold for their alpha-linolenic acid (ALA), but their profiles run in opposite directions. Hemp is linoleic-first — linoleic acid 50.0–60.0%, ALA 15.0–25.0%, with 1–4% gamma-linolenic acid (GLA) — while flaxseed is ALA-first at 45.0–65.0%, with linoleic at 12.0–20.0% and no GLA at that level. A gram of hemp oil therefore delivers 150–250 mg of ALA, against 450–650 mg from a gram of flaxseed oil. In one lineHemp seed oil is linoleic-first with 15–25% ALA and a little GLA; flaxseed oil is ALA-first with 45–65% ALA, so a gram of each delivers a different dose and a different oxidation risk. ## The two profiles on one page The catalog windows compare directly; the table uses the release limits from each specification, not a batch result. Hemp seed oil and flaxseed oil: composition windows | Parameter | Hemp seed oil | Flaxseed oil | Botanical source | Cannabis sativa L. seed | Linum usitatissimum L. seed | Linoleic acid (C18:2 n-6) | 50.0–60.0% | 12.0–20.0% | Alpha-linolenic acid (C18:3 n-3) | 15.0–25.0% | 45.0–65.0% | Oleic acid (C18:1 n-9) | 10.0–20.0% | 12.0–20.0% | Gamma-linolenic acid (C18:3 n-6) | About 1–4%; reported in the profile | Not a declared component | ALA per gram of oil | 150–250 mg | 450–650 mg | Dominant note in the oil | Linoleic, with a green, nutty character | ALA, with a drying-oil character ## The ratio runs in opposite directions Hemp seed oil sits at roughly 2.0–4.0 parts linoleic acid to one part ALA, with a typical cold-pressed lot near 3:1. Flaxseed oil sits the other way round: its ALA-to-linoleic ratio is roughly 2.3–5.4 to one, and the linoleic-to-ALA ratio is well below one. The two ratios are the quickest way to tell the oils apart on a certificate, and the GLA peak confirms the hemp side. GLA is present in hemp seed oil at roughly 1–4%, which is 10–40 mg per gram. Flaxseed oil does not carry a declared GLA fraction, so a resolved C18:3 n-6 peak next to the ALA peak is a hemp signal. The peak is small, and a method that merges the two C18:3 isomers will hide it; the chromatogram has to show the pair separated before either figure means anything. A blend defeats the ratio: sunflower or safflower oil can lift linoleic acid, and a little flaxseed oil can lift ALA, so a mixture can sit inside the hemp windows. The sterol, tocopherol and cannabinoid checks are harder for a blend to satisfy; the ratio is a filter, not a proof. ## What a gram delivers The dose comparison follows from the ALA window. The table uses the catalog floors and ceilings, not a batch result; the release figure for the lot is what belongs on a label. ALA delivered at the catalog floors and ceilings | Oil and ALA level | ALA per 1 g | ALA per 500 mg | Oil needed for 2 g ALA | Hemp seed oil, ALA 15.0% | 150 mg | 75 mg | 13.3 g | Hemp seed oil, ALA 25.0% | 250 mg | 125 mg | 8.0 g | Flaxseed oil, ALA 45.0% | 450 mg | 225 mg | 4.4 g | Flaxseed oil, ALA 65.0% | 650 mg | 325 mg | 3.1 g The 2 g column is arithmetic against the EU alpha-linolenic acid claim intake, not a recommended dose. A 500 mg softgel of hemp oil carries 75–125 mg of ALA, against 225–325 mg for flaxseed oil. Delivering 2 g a day from hemp takes 16–27 capsules; from flaxseed, 6–9. The capsule count is what the formulator must size. ## The GLA that flaxseed oil does not have Hemp seed oil carries GLA, an omega-6 acid with three double bonds, at roughly 1–4%: 10–40 mg per gram, or 5–20 mg in a 500 mg capsule. Flaxseed oil has no comparable GLA fraction, so a formula that wants both ALA and GLA from one oil cannot get them from flaxseed alone. The GLA figure also has a labelling consequence. If the oil is sold on its GLA content, the specification needs a range, a method and a basis, and the label declaration has to be calculated from the release result. A GLA figure quoted without the method that separates it from ALA is not a specification. This page makes no health claim for GLA or for either oil; the composition is the subject. ## Oxidation: which oil has the shorter fuse Flaxseed oil is the more unsaturated: 45.0–65.0% of its fatty acids are ALA, a triene, against 15.0–25.0% in hemp. On the same pack and condition, flaxseed oil generally has the shorter induction period, and its peroxide and anisidine values can move while hemp is still inside its limits. That is a property of the profile, not a defect. Hemp has a different weakness. Its chlorophyll absorbs light and passes the energy to oxygen, so a green oil in clear glass oxidises faster than the same oil in amber glass. Flaxseed oil is also light-sensitive, but the hemp colour adds a photochemical route that a pale refined oil does not have. Both oils need an oxygen barrier, a small headspace and a cool, dark store; the pack is chosen for the oil, not the shelf. In a blend, the least stable oil governs. A small share of flaxseed oil can pull a mostly saturated blend down, and a small share of hemp oil can add a chlorophyll route to a blend that was otherwise pale. Measure the blend at its own storage condition rather than averaging the components. ## The label and the ingredient list The ingredient list names the species, not the family. “Hemp seed oil” and “flaxseed oil” are different declarations, and a blend must list both. Neither oil is on the EU Annex II allergen list or the US major-allergen list, so the oil itself does not trigger a declaration; a powder on a carrier still has to be assessed for the carrier's source. The nutrition declaration states ALA per serving from the release result. In the EU, the authorised alpha-linolenic acid claim requires 2 g a day, which is 8–13.3 g of hemp oil at the catalog windows but only 3–4.4 g of flaxseed oil; below that intake the claim cannot be paraphrased. In the US, a structure/function statement needs substantiation and the DSHEA disclaimer, and neither oil supports a disease claim. ## When to choose which Choose hemp seed oil when the formula wants a linoleic-first oil, when the natural GLA fraction is part of the composition story, or when the flavour and the green colour fit the product. It is the shorter route to a high linoleic figure and the only one that carries GLA at a declared level. Choose flaxseed oil when the dose per gram is the constraint: a capsule that has to carry a meaningful ALA amount at a small fill weight is easier to build on the flaxseed profile. Choose the refined grade of either oil for a pale, mild oil, and a powder on a carrier for a dry format. The catalog specifications are on the hemp seed oil product page and the flaxseed oil product page. The grade question for hemp is on the hemp grades page; the analytical methods are indexed under methods; the release workflow is on the quality page. ### 03 Hemp seed oil oxidises; chlorophyll, oxygen and the pack set the shelf life URL: https://nutrition.rainwoodbio.com/products/fatty-acids/hemp-seed-oil/stability/ Reviewed: 2026-11-20 Hemp seed oil is highly unsaturated: linoleic acid at 50.0–60.0% carries two double bonds, ALA at 15.0–25.0% carries three, and the small GLA fraction carries three as well. Oxygen attacks those bonds, light and warmth accelerate the attack, and the chlorophyll behind the green tone makes light more serious than it is for a pale refined oil. The fatty-acid assay can still read inside its range while the oil turns, so stability is read from peroxide value, anisidine value and free fatty acid over time. In one lineHemp seed oil fails through oxidation, and its chlorophyll makes light the first variable to control: the pack, the headspace and the storage condition set the retest period. ## The neat oil in its sealed pack The catalog moisture limit is ≤0.1%. That is a gate at filling, not a buffer for a humid store: water drives hydrolysis, hydrolysis raises free fatty acid, and an open bottle or drum in a damp room is no longer in the condition it was tested in. Oxygen is the larger variable. Oxidation starts at the oil surface and continues in the air above it, so a full drum ages more slowly than one drawn down. A nitrogen blanket at filling displaces that air, but the flush has to be specified and checked. Once a pack is open, decant the remainder into a smaller container and use it within the agreed in-use period. Light is a variable hemp shares with every oil, but its chlorophyll makes the effect stronger. Chlorophyll absorbs visible light and passes the energy to oxygen, so a green oil in clear glass on a lit shelf oxidises faster than the same oil in amber glass or an opaque secondary pack. Warmth accelerates the same reactions, and the three factors compound: a warm, bright, part-used bottle is the hardest case. ## Blends, emulsions and softgel fills Hemp seed oil is not water-soluble and is not supplied as an aqueous solution. The systems that matter are oil blends, oil-in-water emulsions and softgel fills, and each changes the rate at which oxygen reaches the oil. In a blend, the least stable oil usually governs the induction period, so a small share of hemp oil can pull a mostly saturated blend down; measure the blend, not its components. In an emulsion the oil is dispersed into droplets, the interfacial area is large, and oxygen, light and trace metals meet the oil at the interface. Chlorophyll stays in the oil phase and still absorbs light, so an emulsion in a clear bottle combines the interfacial risk with the photochemical one. A softgel shell limits oxygen transfer without stopping it, and it can carry moisture into the fill. Measure the fill at release and at the end of the study, and watch the shell for discolouration and leakage. A powder on a carrier is a different system: the wall protects most of the oil, but free oil at the particle surface is exposed and moisture is a failure route. ## What moves the oil in storage What changes hemp seed oil during storage | Factor | Effect | Control | Oxygen | Raises peroxide value, then the anisidine value | Nitrogen blanket; low headspace; sealed pack | Light | Chlorophyll-mediated oxidation at the oil surface | Amber glass or an opaque secondary pack | Heat | Shortens the induction period; speeds hydrolysis | Cool store; short holds; no hot loading bay | Moisture | Drives hydrolysis and raises free fatty acid | Dry store; closed liner; ≤0.1% at release | Trace metals | Catalyse oxidation at very low levels | Stainless steel or glass contact; avoid iron and copper | Chlorophyll | Transfers light energy to oxygen | Dark pack; consider the refined grade for a clear format | Repeated opening | Replaces the headspace with air | Smaller packs; decant into a full container The factors reinforce one another, and the useful question is not whether the oil is stable in the abstract but for how long, in which pack and condition. A part-used drum in a warm room combines heat, oxygen and a large headspace. ## A stability protocol for the oil A usable protocol fixes four things: the container, the climate, the sampling times and the tests. A common design uses 25 °C/60% relative humidity for long-term storage, 30 °C/65% RH as an intermediate condition and 40 °C/75% RH for accelerated storage. Add a light-exposure arm, because a dark incubator cannot reveal the chlorophyll-mediated failure, and include the customer's own pack. Test peroxide value, anisidine value, free fatty acid, moisture and appearance at every point, and run the full fatty-acid profile at the first and last points to confirm that linoleic, ALA and identity are unchanged. Tocopherols are worth measuring if the oil is sold on its minor fraction or if an antioxidant has been added. An induction period on a Rancimat or Oxipres instrument is a useful screen, but it ranks oils; it does not replace a storage study in the pack. Sampling has to be representative. A top-of-drum sample is not the same as one drawn after mixing, and a sample left open on a bench has started to oxidise before it reaches the laboratory. The protocol should say how the sample was taken, how it was stored and how long it waited. ## What the finished formula does A softgel is the usual format, and the fill is the part that fails. Shell thickness, the plasticiser and the seam decide how much oxygen and moisture reach the oil, and a fill can turn before the shell shows anything. Measure the fill's peroxide and anisidine values, not only the capsule's appearance. An antioxidant can slow the reaction but cannot undo it. Mixed tocopherols, rosemary extract or another system should be named with its level in the specification, and adding tocopherol to an oil with a high peroxide value does not restore the specification. Decide the system before the stability study, not after a failing result, and check that the label reflects it. An emulsion adds an aqueous phase, an interface and a pH to control, and a dry blend adds the carrier and the risk of moisture migration. A stick pack needs its own study; the bulk oil's data does not transfer to a powder or a beverage, and neither does the softgel's. ## How the retest period is set We do not publish one shelf-life number for hemp seed oil, because the pack, the headspace and the storage condition set it. The retest period is supported by data for the pack the customer buys; a figure quoted without that pack and condition is an assertion. Before an extension, the retained sample is re-tested at the end of the period against the same limits: peroxide value, anisidine value, free fatty acid, moisture and appearance, with the profile checked at the end point. The documents should carry the lot, the production date and the retest date, and the buyer should confirm the remaining life on arrival. The catalog specification is on the hemp seed oil product page. The release tests are set out on the COA page, the packs and lead time are on the MOQ page, the test methods are indexed under analytical methods, and the release and retained-sample workflow is on the quality page. ### 04 Hemp seed oil: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/fatty-acids/hemp-seed-oil/moq/ Reviewed: 2026-11-20 The MOQ for hemp seed oil is 1 kg, supplied in a 1 kg amber bottle; the bulk pack is a 25 kg HDPE drum. Lead time is 1–7 days on the standard pack. A firm quotation needs six pieces of information: grade and CAS number, the fatty-acid windows and oxidation limits, quantity and pack, destination and Incoterm, documents, and the intended market and use. In one lineOne kilogram is the smallest order because the amber bottle is the smallest pack that can be filled, flushed, sampled and traced as one lot. ## Why the minimum is 1 kg A 1 kg bottle covers a bench-scale softgel or blend trial, a retained sample and an independent identity test, and it travels as a parcel without a pallet. It is a commercial unit with a lot code, not a scoop from a drum, so the material in the trial and the material in the production order can be compared on paper. That traceability is the reason the minimum exists, not a volume target. Below 1 kg the oil is normally split from a larger lot and repacked. The split adds handling, replaces the original pack identity with a secondary one and makes the retained sample harder to tie to the drum, while changing nothing about the chemistry. The 25 kg drum is the bulk unit: it reduces handling per kilogram but commits inventory and a longer storage period, and a part-used drum is a larger oxidation exposure than a part-used bottle. A buyer who needs 500 g for a trial is asking for a repack. Say so, get the split in writing, and keep the secondary lot code with the trial results rather than presenting the material later as the 1 kg catalog bottle. ## Packs and handling Standard hemp seed oil packs | Pack | Net weight | Typical use | Notes | Amber glass bottle | 1 kg | Trial, sample, small batch | Light barrier; nitrogen flush on request; reseal after opening | HDPE drum | 25 kg | Production | Closed liner; lot code on drum, liner and certificate | Split lot | On request | Sub-kilogram trial | Repacked from a bulk lot; secondary pack identity | Powder on carrier | On request | Stick pack or dry blend | A separate product with a declared oil load The pack is an oxygen barrier as much as a container. Amber glass protects the oil from light but holds a headspace that grows as the bottle is used; a drum holds more oil but a much larger headspace once it is drawn down. The nitrogen flush, if specified, belongs on the quotation and on the certificate rather than in a verbal assurance, because an unflushed bottle and a flushed one look identical. The chlorophyll in the cold-pressed oil makes the light barrier part of the specification, not a presentation detail. A drum should be conditioned before pumping if it has been stored cold, because the wax fraction can make the oil cloudy and thick. It should not be rolled or dropped: the liner is the moisture barrier, and a damaged liner is a slow leak rather than a visible failure. ## Lead time and dispatch The standard pack is quoted at 1–7 days after order confirmation. That window covers picking, nitrogen flushing where agreed, document preparation and dispatch; it does not include shipping transit, customs clearance or the customer's own quality release. A split lot, a non-standard pack or a batch-specific fatty-acid window adds time, and the quotation should state it separately rather than folding it into the range. Ask for the dispatch date, not only the lead-time range. A 1 kg bottle usually moves as a parcel, while the 25 kg drum travels on a pallet; the Incoterm says who books the freight and who clears entry. The certificate and the rest of the lot documents should travel with the pack, not follow it, because an oil that arrives without its release record cannot be quarantined against a limit. ## What a quotation needs Six items make a quotation firm enough to compare: - Product and grade. Cold-pressed hemp seed oil, Cannabis sativa L. seed, CAS 89958-21-4, with the process grade named. - Specification. Linoleic, ALA and oleic windows, GLA reporting, free fatty acid, peroxide value, moisture and the anisidine limit if one is agreed. - Quantity and pack. 1 kg amber bottle, 25 kg HDPE drum, or a split lot. - Destination and Incoterm. The country and port or address, plus the trade term. - Documents. COA, specification, SDS and any market statement the importer needs. - Intended use and market. Softgel, blend, food or another use, and the market where it will be sold. A quotation that names “hemp oil” without the grade and the fatty-acid windows is incomplete, because two suppliers can meet it with oils that behave differently in the same softgel. Commercial terms are stated on the quotation; this page does not publish them. ## The sample is a lot, not a demonstration The 1 kg bottle is the qualification sample. Test identity, the full fatty-acid profile, free fatty acid and peroxide value before scaling, and keep a retained sample from the same pack. The lot code on the sample, the certificate and the quotation should match. An untraceable sample is a demonstration, not a qualification. Use the sample for a stability screen in the customer's own pack as well: fill a softgel or prepare the blend, and hold it at the intended storage condition. The bulk oil's release result says nothing about the shell, the headspace or the antioxidant in the finished formula. A sample that performs on the bench and fails in the pack has done its job if the failure was measured before the production order. A sub-kilogram trial is a split lot with its own handling record. Ask for the split in writing, keep its secondary lot code with the trial results, and do not present it later as the 1 kg catalog bottle. ## Terms to settle before the first order The quotation and the quality agreement should sit on the same page: Incoterm, pack, dispatch window, the specification revision, a COA for each lot, the retained sample, the retest period and the route for a change of grade or pack. Settle those before the first production order; the same conversation is harder after a dispute. If a lot misses the agreed specification, the route is the retained sample and a joint re-test against the named method, not a photograph of the bottle. The agreement should name the referee laboratory both sides accept and how a result is handled. Because hemp seed oil moves on storage, the agreement should also state the remaining shelf life expected at delivery and what happens if the peroxide or anisidine value has moved by then. The catalog specification is on the hemp seed oil product page. The release tests are on the COA page, the grade choice is on the grades page, the market documents are on the compliance page, the test methods are indexed under methods, the release workflow is on the quality page, the term is defined in the MOQ glossary entry, and shipping is covered on the logistics page. ### 05 The regulatory file for hemp seed oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/hemp-seed-oil/compliance/ Reviewed: 2026-11-20 Hemp seed oil pressed from the seed is an ordinary food oil with a documented history of use, so the question is not whether the oil is permitted but how the finished product is positioned in the destination market. One material-specific point separates it from most seed oils: the delta-9-THC figure, which is limited in several markets even when the oil comes from clean seed. The buyer's regulatory team confirms the route; this page lists the documents and limits for the file. In one lineHemp seed oil is an ordinary food oil, but the file has to show the seed source, the delta-9-THC result and the destination route behind the label. ## What the file contains The file holds four things at once: the specification version, the lot certificate, the limits and label rules for the finished product, and the record of how source, process and pack changes are handled. The COA reports the lot, the specification states the grade and release limits, and the SDS covers handling; none of them settles the destination route. The file also needs the statements a buyer's quality team asks for: allergen, GMO, country of origin, residual solvent, trans fat and, where relevant, organic certification. Hemp adds a cannabinoid statement with the delta-9-THC and CBD results, the method and the limit of quantification. Name any gap before the order moves, and keep a versioned document list at the front. ## European Union Oil produced by simple pressing of hemp seed has a history of consumption in the EU and is not treated as a novel food in the Novel Food Catalogue, as of this review. A cannabinoid-rich extract is a different material and does not inherit that position. Labelling follows Regulation (EU) No 1169/2011, and a food supplement follows Directive 2002/46/EC, which requires a nutrition declaration; the ALA amount per serving is declared on that basis. Commission Regulation (EU) 2022/1393 sets a maximum of 7.5 mg/kg for delta-9-THC equivalents in hemp seed oil, as of this review; the buyer's team checks the current text and the category that applies. Contaminants fall under Regulation (EU) 2023/915, and the applicable maximum depends on the food category and the daily dose. “Cold-pressed” is a process statement, supported by the press record rather than by a certificate line. ## United States In the United States, hemp seed oil is sold as a conventional food or a dietary supplement ingredient. The 2018 Farm Bill removed hemp from the Controlled Substances Act, and in December 2018 the FDA completed its review of three GRAS notices — hulled hemp seed (GRN 765), hemp seed protein powder (GRN 771) and hemp seed oil (GRN 778) — raising no questions on their use in human food. That position covers the seed-derived oil, not a product with added CBD. The finished product is the brand's responsibility: current good manufacturing practice under 21 CFR 111, the Supplement Facts panel for a supplement, and the labelling rules in 21 CFR 101 for a food. Structure/function statements need substantiation and the DSHEA disclaimer, and no disease claim is open. State requirements, such as California's Proposition 65, sit on top of the federal position. ## United Kingdom The UK is not one file. Great Britain uses its own labelling and supplement rules and a GB novel-food register; Northern Ireland sits under the EU framework, including the EU THC limit for hemp seed oil. The delivery address decides which applies, and the buyer's team records that decision with the order. A THC limit that applies in one part of the UK may not be the same in the other. ## Contaminants and limits The panel is a finished-product calculation, not only a drum result. The table below is the usual starting point for a supplement file; the current destination text and the daily dose decide the final limit. Limits to confirm for the finished hemp seed oil product | Parameter | Typical reference | What the file should show | Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method, limit and the finished-product calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception that applies | Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result and method | Arsenic (As) | Customer or market limit | The agreed limit and the method, stated on the certificate | Delta-9-THC | 7.5 mg/kg in hemp seed oil (EU, as of this review) | Result as THC equivalents, method and limit of quantification | Free fatty acid | ≤0.50% as oleic (specification) | Measured result and titration method | Peroxide value | ≤5.0 meq O₂/kg (specification) | Measured result and the units The last two lines are specifications rather than regulatory maxima, but they belong in the same review: an oil that meets the metal and THC panel while carrying a stale note is a quality failure even when it is legally compliant. ## Claims and the label In the EU, as of this review, a health claim may be used only if it is authorised, and the register entry for alpha-linolenic acid sets the exact wording and a minimum intake of 2 g per day. Hemp oil at 15.0–25.0% ALA means 8–13.3 g of oil a day to reach that intake, which is a large number of 1 g capsules; a product that cannot deliver it cannot carry the claim. Nutrition claims for omega-3 have their own thresholds per 100 g and per 100 kcal. In the US, a structure/function statement needs substantiation and the DSHEA disclaimer, and it must not describe a disease. In both markets no disease-related claim is made, and this site publishes the specification rather than a claim. The label must match the form ordered: an unrefined oil cannot be labelled refined, and a powder must declare its carrier. A CBD claim is outside this file. ## Documents for the file The file needs the COA with the GC profile and its basis, free fatty acid, peroxide value, moisture, the metal panel, the microbiology count and the cannabinoid results; the specification with the grade, the fatty-acid windows and the pack; the TDS and SDS; the allergen, GMO, origin and residual-solvent statements; and the trans fat figure where the market asks for it. For the powder, add the carrier identity and the oil load. The hemp seed oil product page carries the catalog specification, and the identity page sets out the analytical evidence behind it, with the tests indexed under methods. The EU, US and UK notes collect the framework references, and the quality page describes the release file. ## Checklist before the first order - Specification version, grade, CAS number and fatty-acid windows are named. - The COA, TDS, SDS, allergen, GMO, origin and residual-solvent statements are present. - The cannabinoid panel names the method, the result and the limit of quantification. - Each result is converted to the finished-product dose, including the THC calculation. - Oxidation limits and the anisidine decision are in the specification, not only in the email. - The label, the nutrition declaration and the claim have been reviewed for the destination. - The quotation, the specification and the certificate carry the same version. A file built this way answers the questions a distributor or an authority reviewer will ask, and it keeps the grade, the pack and the label tied to the lot actually shipped. ### 06 How we prove a hemp seed oil lot is Cannabis sativa seed oil URL: https://nutrition.rainwoodbio.com/products/fatty-acids/hemp-seed-oil/identity/ Reviewed: 2026-11-20 A hemp seed oil lot is the declared material when four checks agree: the paperwork names Cannabis sativa L. seed and the grade, the GC fatty-acid profile sits inside the catalog windows, the minor components — GLA, sterols, tocopherols and a cannabinoid screen — are consistent with seed oil, and the condition figures show a fresh lot. ALA alone is a weak proof, because several blends can land near the same figure. The full profile and the minor fraction are what make the identification specific. In one lineIdentity is the whole fatty acid profile plus the minor components: the linoleic-to-ALA ratio and the GLA place the oil, and the sterols, tocopherols and cannabinoid screen make it specific. ## The identity layers Start with the paper: species, plant part, process grade and lot. “Hemp oil” can mean the seed oil or a whole-plant extract, so the botanical name and the plant part are the identifiers that matter. The fatty-acid profile places the oil in a family but does not name the species. The minor components carry the more specific information, and the condition figures show whether the lot is fresh. Four identity checks for hemp seed oil | Check | Question | Evidence | What it establishes | Paperwork | Is the material named? | Species, plant part, grade and lot | Identity on paper | Fatty acids | Is the profile plausible? | GC-FID of fatty-acid methyl esters | The oil family | Minor components | Is the fingerprint hemp seed? | GLA, sterols, tocopherols and a cannabinoid screen | Authenticity | Condition | Is it fresh and the claimed grade? | Free fatty acid, peroxide value, p-anisidine value, colour and press record | Handling and grade Each check is easy on its own and harder to satisfy together. A profile can be copied from a specification; a chromatogram with the column, standard and integration cannot. A GLA figure can be quoted; the sterol and tocopherol pattern is harder to invent. ## The ratios that carry the identity With linoleic acid at 50.0–60.0% and ALA at 15.0–25.0%, the ratio of the two usually lands between 2.0 and 4.0, with a typical cold-pressed lot near 3.0. That is a useful first filter, but it is not unique: sunflower and soybean oils can be blended toward the window, and a high-oleic sunflower sits below it. The ratio can exclude some materials; it cannot confirm this one. GLA is the second filter. Hemp seed oil carries GLA at roughly 1–4%, and flaxseed oil carries none at that level, so a resolved C18:3 n-6 peak beside the ALA peak rules out a straight flaxseed substitution. It does not rule out a blend, because a small GLA addition can be made. The sterol and tocopherol patterns are the next layer: hemp seed oil is dominated by beta-sitosterol among the sterols and by gamma-tocopherol among the tocopherols, and a blend built from sunflower or safflower oil moves those patterns. The cannabinoid screen is the check that most other seed oils do not need. A seed oil pressed from clean seed should show delta-9-THC and CBD at or below the limit of quantification; a whole-plant extract blended into oil lifts those figures and adds a different minor fraction. The screen is also the evidence behind the THC limit in the destination file, so the identity and compliance questions meet on the same line. ## Why X-ray diffraction does not identify an oil X-ray diffraction needs a crystal lattice. A liquid oil has none, so the measurement returns a broad halo rather than a pattern that can identify the oil or measure its fatty acids. XRD is not a release test for hemp seed oil, and a certificate line that says “XRD conforms” without a reference phase has added nothing. It is useful one step away from the oil. A crystalline isolate or a sterol fraction has a solid-state pattern that diffraction can compare with a reference, and a spray-dried powder can be checked for crystallinity. Those are questions about the solid, not the oil; for the oil itself, GC and HPLC remain the tools. ## What adulteration looks like Common hemp seed oil substitutions and the signals | Route | What changes | Test | Sunflower or safflower oil | Linoleic rises, ALA falls, GLA absent | GC profile with GLA resolution; sterols | Rapeseed or soybean oil | Oleic or linoleic shifts; ALA low | GC profile; tocopherol pattern | Flaxseed oil | ALA far above the hemp window; no declared GLA | GC profile and the LA-to-ALA ratio | Whole-plant extract with cannabinoids | THC and CBD above the seed-oil level | Cannabinoid panel by HPLC or GC-MS | Refined oil sold as cold-pressed | Chlorophyll and colour down; FFA and PV lower | Colour, tocopherols and the press record | Stale oil | Peroxide or anisidine value up; FFA may rise | PV, p-AV, FFA and a sensory check Colour is the easiest thing to fake and the weakest evidence. A green tone can come from the seed, the press, a blend or an added colour, and a refined oil can be described as cold-pressed in a quotation without any change to the certificate. The sterol, tocopherol and cannabinoid patterns are harder to reproduce. Oxidation is the opposite case: the identity tests can pass while the oil is stale, so condition has to be read at the same time. ## Writing identity into the specification Put the identity clauses next to the composition, not in a separate document. Name the species and plant part, the cold-pressed grade and the lot. Add the linoleic, ALA and oleic ranges with the GC method and the basis, require GLA to be reported and resolved from ALA, and require the full profile rather than one peak. Where authenticity matters, add the sterol and tocopherol patterns, the cannabinoid screen and the press record. Keep FFA, PV, p-AV, moisture and appearance as condition lines, and require the lot code and retained sample. Two problems recur. One is a profile window so narrow that a normal crop fails. The other is a linoleic result with no stated basis, so the reader cannot tell whether it refers to total fatty acids or to oil mass. The catalog ranges are wide enough for crop variation, and the COA page sets out the reporting format. ## Questions that produce evidence - Can you provide the GC chromatogram for this lot, with the column, standard and integration? - What are the linoleic, ALA and oleic results, and on what basis are they expressed? - Is GLA resolved from ALA on that method, and what is the GLA result? - Can you show the sterol and tocopherol patterns for the same lot? - What are the delta-9-THC and CBD results, the method and the limit of quantification? - What were FFA, PV and p-AV at release, and what storage history does the lot have? - What record supports the cold-pressed claim, and will you agree to a joint re-test of the retained sample? A supplier who answers these with documents is giving an identity file. One who answers with a certificate and a percentage is giving a summary. The catalog specification is on the hemp seed oil product page; the grade choice is on the grades page; the comparison with flaxseed is on the level-four page. The methods index explains the tests, and the quality page covers lot release. ### 01 Reading an invertase COA: activity, unit and release limits URL: https://nutrition.rainwoodbio.com/products/enzymes/invertase/coa/ Reviewed: 2026-11-20 An invertase certificate is short, and one line carries most of the practical value: the activity. That line is a rate per gram measured on sucrose at a stated pH and temperature, so it is comparable only when the unit definition and the assay conditions are printed beside it. The remaining rows cover appearance, moisture, particle size, metals and microbiology. Read the document as a test report, not as a label. In one lineThe activity is a rate, not a concentration: without the unit definition, the sucrose substrate and the assay conditions, the number cannot be reproduced. ## The certificate as a test report A release certificate is useful when every row can be checked. Each line needs the test, the method and the limit; the measured result belongs in its own column. Catalog release specification · invertase powder | Test | Method | Release limit | Appearance | Visual inspection | White to light tan, free-flowing powder | Activity | Sucrose hydrolysis; unit definition stated | ≥100,000 U/g | Identification | Activity assay conform; EC 3.2.1.26 and source named | Conforms | Loss on drying | Gravimetric | ≤5.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh CAS 9001-57-4 names the enzyme, but it does not identify the preparation. The certificate should also name the production organism and the carrier, because the same activity can be reached by different routes. A specification that stops at CAS and U/g has described a category, not a lot. ## What the activity number means The assay starts with sucrose in buffer. The sample is diluted into the linear range, incubated for a fixed time at a fixed temperature, and the reaction is stopped. Glucose is then measured, usually with glucose oxidase/peroxidase, by a reducing-sugar method, or by HPLC. One molecule of sucrose yields one molecule of glucose and one of fructose, so the glucose result is also the sucrose result. Activity is calculated as micromoles of glucose per minute per gram of powder as sold. Two published definitions show why the wording matters. One widely used definition sets a unit as the hydrolysis of 1.0 micromole of sucrose per minute at pH 4.5 and 55 °C. The JECFA monograph defines its unit on reducing sugar expressed as invert sugar per minute, and the FCC uses an INVU with its own factor. These are separate definitions; a figure in one is not a figure in another without the method. What the activity line has to state | Item | Required detail | Why it matters | Unit basis | U per gram of powder as sold | A dry-basis or protein-basis figure is a different number | Substrate | Sucrose, grade and concentration | The rate depends on substrate concentration | pH | The assay pH | Activity falls outside the working window | Temperature | The assay temperature | Temperature changes the rate; the assay temperature must be stated | Time and stopping | Incubation time and stop reagent | Short or long incubations leave the linear range | Detection | Glucose oxidase/peroxidase, reducing sugar or HPLC | Different detectors calibrate differently | Calculation | µmol glucose/min/g; dilution and blank | The formula is part of the method | Moisture basis | As-is or dry-solids basis | Water changes the number without changing the enzyme The commercial basis is per gram of powder as sold. A carrier dilution lowers the units per gram without changing the enzyme; a dry-solids figure can look higher because it removes water. ## Release limit versus batch result ≥100,000 U/g is a floor, not a target. Two lots at 104,000 and 210,000 U/g would both pass, yet a process that consumes part of the activity would respond to them differently. The limit is the gate; the measured value is what the formulator has to work with. What the batch result should show | Test | Release limit | What the lot result shows | Activity | ≥100,000 U/g | Measured U/g, with method, unit definition and RSD | Loss on drying | ≤5.0% | A measured percentage | Heavy metals | Per element | One figure per element, in mg/kg | Microbiology | Counts and absence | The plate count plus the absence result | Particle size | ≥95% through 80 mesh | The percentage that passed the 80 mesh sieve Ask for the method reference, the release date, and whether the value refers to release or to the end of the shelf life. ## Where the variation comes from Fermentation is the first source of spread. Strain, medium, sucrose feed, aeration and harvest time change how much enzyme the cells make. Recovery and concentration decide how much of that activity reaches the powder. Standardisation with a food-grade carrier then fixes the units per gram, and drying and milling can lose activity through heat. Water and heat continue to move the figure after release. A powder stored in a humid room picks up moisture, and the as-is activity falls even when the protein is intact. Colour is not a release test: a darker tan can follow a longer dry while the activity remains in specification. Read the batch record before rejecting a lot on appearance. Method drift is harder to see. A new substrate lot, a recalibrated glucose standard or a different incubation bath can make two U/g results incomparable even when the paperwork looks identical. ## When to order an outside assay An outside assay earns its place for a new source, an initial shipment to a regulated market, a disputed result, or a label statement that rests on the activity figure. The scope can remain modest: the named activity method on a retained sample, protein or specific activity, moisture, the metal panel, microbiology, and a protein pattern compared with a reference preparation. The laboratory has to use the same substrate, pH, temperature and calculation as the specification; otherwise the exercise compares methods, not powders. A report in SU/g is not a second opinion on a U/g result unless the SU definition is the same. The sample and the report must carry the same lot code, and the report should state the laboratory's accreditation for each test. ## A side-by-side comparison Put six lines side by side: the unit and its definition, the assay pH and temperature, the measured activity, the protein figure or specific activity, the moisture and the mesh, and the source organism with its carrier. Agreement on U/g is not agreement on the preparation; the other five lines decide that, and a trial will expose the gap before the quotation does. Traceability comes next. The lot code on the paper must match the pouch and the retained sample, and the certificate should name the source organism. If the code does not match the pack, the certificate is valid for some other delivery. The catalog values sit on the invertase product page. The checks that separate a real preparation from a diluted or substituted one are on the identity page; the quality page sets out how a lot is released; the assay families are compared in the methods library; the terms are defined in the COA glossary entry. ### 02 Invertase grades: powder, liquid and activity level URL: https://nutrition.rainwoodbio.com/products/enzymes/invertase/grades/ Reviewed: 2026-11-20 Invertase is sold as a powder or a liquid, at different activities per gram or per millilitre, from different production organisms. The catalog item here is a powder at ≥100,000 U/g. Changing the grade changes the weight in the formula, the assay conditions, the storage and sometimes the regulatory reference, so the grade belongs in the specification, not in the packing list. In one lineThe grade is the form, the activity per gram and the production organism; changing any one changes the dose, the assay and the label. ## Why invertase comes in more than one grade An enzyme preparation is not a single chemical. It contains the enzyme, residual fermentation solids, a carrier or stabiliser, and water. A grade fixes those variables and the activity per unit weight. The same word on two quotations can therefore describe a powder at 100,000 U/g, a granulated powder at 50,000 U/g, or a liquid at 200,000 U/mL. Three pressures push a buyer to one grade. The dosage form decides whether a solid or a liquid can be handled. The process decides how much activity is needed per kilogram of substrate. The market decides whether the production organism and the carrier fit the regulatory file. A grade that is convenient in the pilot may be the wrong one in production. ## The grade families side by side Invertase grade families and what changes | Grade | Activity basis | Typical use | What changes | Standard powder | U/g, 80 mesh | Dry blends, fondant, bakery | Baseline; dusts and picks up moisture | Granulated powder | U/g, coarser | Blends that need flow | Dissolution and dust change; activity per gram may differ | Liquid | U/mL | Syrups and continuous dosing | Preservative, cold storage and microbial load | High-activity powder | U/g, higher | Small dose in a large batch | Weighing accuracy at a small dose The table describes families, not a product list. The catalog here is the standard powder: white to light tan, ≥95% through 80 mesh, loss on drying ≤5.0%, ≥100,000 U/g. A granulated form can be requested. A liquid preparation is a different purchase with its own carrier, preservative and storage. ## Form, solubility and handling The powder is white to light tan and free-flowing. It dissolves in water to a clear to slightly turbid solution; the turbidity comes from carrier and residual solids, not necessarily from poor quality. The catalog particle size is ≥95% through 80 mesh, which suits a dry blend and keeps the powder dispersed in a fondant. Loss on drying is ≤5.0%; a powder close to that limit has little margin for moisture uptake. Two physical points matter at the bench. First, the powder is a protein preparation and it dusts; weigh it in a ventilated area and avoid raising a cloud. Second, the activity is not uniformly distributed if a small scoop is taken from a large drum that has settled. Roll or blend the drum before sampling, and take the sample from the full depth. A liquid grade is measured in U/mL, not U/g, and it carries water, a preservative and a microbial risk that a powder does not. Its colour and clarity are not identity tests. If a process can take a powder, the powder avoids the preservative and cold-chain questions. ## Dosing is arithmetic on activity Decide how many units the process needs, then divide by the measured activity of the lot: grams = units required ÷ U/g. A trial that needs 2,000,000 U and a lot at 100,000 U/g weighs 20 g. The same trial with a lot at 150,000 U/g weighs 13.3 g. The label minimum is not the number to use for either calculation; the batch result is. Three corrections follow. The process loses activity to heat, pH and time, so the formulator may add an overage; that is a process decision validated in the matrix, not a property of the powder. The finished blend has its own activity per gram, and that is the figure to declare if the blend is sold as an enzyme preparation. And a small dose in a large batch needs a weighing check: at 20 g in 100 kg, a 1 g error is 5% of the dose. None of this is a serving recommendation. In a supplement blend, the enzyme is an ingredient with a technical function, and any label statement is a separate regulatory question. ## What to write into the specification - “Invertase (β-fructofuranosidase), EC 3.2.1.26, CAS 9001-57-4.” - “Production organism and strain; carrier and stabiliser.” - “Form: powder, ≥95% through 80 mesh, or granulated.” - “Activity ≥100,000 U/g; state the unit definition, sucrose substrate, assay pH and temperature.” - “Loss on drying ≤5.0%; heavy metals and microbiology as listed.” - “Storage condition and retest period for the pack.” - “Destination market and intended use, confirmed before the order.” The source organism belongs in the specification because it is part of identity and because the EU E 1103 monograph names Saccharomyces cerevisiae. An invertase from another host is a different article with its own file. ## When another grade is the wrong choice Four grade changes are usually wrong. A liquid in a dry blend adds water and a preservative to a powder that did not need either. A coarse granule in a syrup dissolves too slowly and leaves a residue. A high-activity powder in a small batch is hard to weigh accurately, and the error is larger than the activity gain. A switch of production organism without a new identity and stability check changes the protein pattern and possibly the regulatory route. The reverse also matters: a higher activity than the process can use adds nothing if the dose is fixed by the substrate. Match the grade to the process, then write the activity, the form and the source into the specification. The catalog item is described on the invertase product page. The COA page explains how to read the certificate; the level-four page compares the units with amylase; the MOQ page covers ordering; the specification glossary entry defines the term. ### 02.1 Invertase vs amylase: two sugar enzymes, two units URL: https://nutrition.rainwoodbio.com/products/enzymes/invertase/grades/invertase-vs-amylase/ Reviewed: 2026-11-20 Invertase and amylase are both sold as sugar-acting enzymes, but they work on different bonds and are measured on different scales. Invertase splits sucrose into glucose and fructose and is assayed as micromoles of sucrose hydrolysed per minute. Alpha-amylase thins starch and is assayed by a dextrinisation method reported in SKB or DU. No factor converts one unit into the other. In one lineInvertase and amylase both act on sugar substrates, but their units measure different reactions, so no factor converts one into the other. ## Sucrose, starch and two different bonds Sucrose is a disaccharide of glucose and fructose joined through a β-fructofuranoside bond. Invertase hydrolyses the terminal non-reducing β-D-fructofuranoside residue and releases the two monosaccharides. Starch is a polymer of glucose joined through α-1,4 bonds, with α-1,6 branch points. Alpha-amylase cuts the internal α-1,4 bonds and produces dextrins and maltose. The two enzymes share a substrate class — carbohydrates — and nothing else at the bond level. That difference decides the application. Invertase is used where the target is sucrose: fondant and soft centres, invert sugar syrup, and blends where a controlled inversion is wanted. Amylase is used where the target is starch: baked goods, starch processing and viscosity control. A formulator who substitutes one for the other has changed the reaction, not the dose. ## Two activity scales with different definitions Two enzymes, two activity scales | Enzyme | Unit | What the unit measures | Typical method | Invertase | U (µmol/min) | Sucrose hydrolysed, measured as glucose or reducing sugar | Sucrose substrate, fixed pH and temperature, glucose detection | Alpha-amylase | SKB | Starch dextrinised against an iodine endpoint | Soluble starch, iodine colour, fixed time and temperature | Alpha-amylase | DU | Starch dextrinised per hour | Iodine endpoint, method-specific definition | Unspecified | “Units” | Nothing comparable | Not a specification The final row is not a definition at all. A figure of “100,000 units per gram” that omits the substrate, the temperature and the endpoint cannot be verified on receipt; each method above would give a different value for the same powder. ## What each assay actually measures Invertase is a molar rate: the laboratory measures glucose or reducing sugar released from sucrose and converts it to micromoles per minute. The result is a count of bonds broken. Alpha-amylase is an endpoint method: the laboratory watches an iodine colour or a viscosity fall as starch is thinned, and the time to the endpoint is converted through a method factor. The result is a dextrinisation rate, not a molar count. The conditions differ too. A common invertase assay runs at pH 4.5 and 55 °C; the SKB method runs at pH 4.8 and 30 °C. Each enzyme is measured near its working window, and the numbers are not transferable. A laboratory cannot run the invertase assay and report SKB, or the reverse. ## Why there is no conversion factor A conversion would only work if the ratio between the assays stayed constant from one preparation to the next. It does not: the substrate, the endpoint and the arithmetic all change. A catalogue that prints a single “enzyme activity” number for a blend has hidden the problem, not solved it. What can be converted is a total within a single scale. Ten grams at 100,000 U/g contains one million units; fifty grams at 20,000 U/g contains the same total. The arithmetic is exact, and it is the only safe conversion between totals; it says nothing about SKB or DU. If a buyer needs the other scale, the second assay has to be run on the same lot. ## Blends and the label Blends are where the unit confusion becomes a label problem. A digestive-enzyme blend may contain invertase, amylase, protease and lipase; each has its own unit and method. The label should declare each activity with its unit, and the specification should name the method. A single “total activity” figure cannot be checked and does not tell the buyer how much of either enzyme is present. Formulation follows the same logic. The overage for invertase is set on the sucrose reaction in the matrix; the overage for amylase is set on the starch reaction. One does not cover the other. If the blend is assayed, each enzyme needs its own method, and the methods have to be inside the laboratory's scope. ## Choosing one for a purchase order Choose invertase when the process target is sucrose hydrolysis: a fondant that should soften, an invert sugar syrup, or a blend where sucrose is the substrate. Choose alpha-amylase when the target is starch thinning: a batter, a starch slurry or a process where viscosity has to fall. If both reactions are wanted, specify both enzymes separately, each with its own activity, unit and method. The purchase order should carry four lines per enzyme: the identity (EC number and source), the activity with its unit definition, the assay method and conditions, and the basis (per gram of preparation as sold). A quotation that gives only “invertase” and “amylase” with a percentage has not specified either enzyme. The two catalog items are described on the invertase product page and the amylase product page. The amylase unit question continues on the amylase grades page; the methods library compares the assay families; the quality page describes the release sequence; the assay glossary entry defines the vocabulary. ### 03 Invertase stability: heat, moisture and the pack URL: https://nutrition.rainwoodbio.com/products/enzymes/invertase/stability/ Reviewed: 2026-11-20 Invertase is a protein, and it loses activity when it is heated, wetted or held in solution. The dry powder is the more stable format; the sealed pack, the storage temperature and the moisture barrier set the shelf life. A liquid preparation adds microbial and preservative questions that a powder does not have. In one lineInvertase loses activity through heat and moisture, so the pack and the storage temperature decide the shelf life, not the powder alone. ## The powder: moisture, heat and the seal The catalog allows loss on drying up to 5.0%, but that figure is the release gate, not a storage allowance. An opened pouch can take moisture from the air, and the as-is activity falls as water dilutes the preparation. In practice the seal and the dryness of the store are part of the specification, even when the certificate does not print them. The powder dusts and its carrier takes up water. Keep it in the original pouch or in a sealed, opaque container; an open tray on the bench is not storage. After cold storage, open the pack only once it has reached room temperature, or water will condense on the powder. Heat is the second driver. A sealed pouch in an ordinary warehouse is usually fine; a hot loading dock, a parked car or a shelf in direct sun is not. The specification should give a storage temperature range, and the label should repeat it. ## The solution: working window and hold time For a yeast invertase, the working range is commonly pH 4.5–5.5 and 50–60 °C. Those are activity conditions, not storage conditions. Minutes or hours at 55 °C belong to a process step; days at 25 °C belong to storage. Above the working window the protein denatures, and the activity does not come back. Water also brings microbes. Sucrose solution feeds them, and an enzyme preparation is not sterile. Preservatives, cold storage and a validated hold time are process decisions. Iron and copper can inhibit the enzyme, so check the contact materials. Light matters less than it does for a photolabile small molecule, but a clear bottle is still a poor choice for a long hold. ## What drives the loss Factors that move invertase activity during storage and use | Variable | Effect | Control | Heat | Denatures the protein; the loss is not reversible | Cool store; add after the process has cooled | Moisture | Dilutes the preparation; raises loss on drying | Sealed pouch; dry store | pH | Moves the enzyme away from its working window | Buffer the solution; validate the matrix pH | Time in solution | Activity declines during the hold | Validate the hold time; dose at the point of use | Metal ions | Inhibit the enzyme | Avoid iron and copper contact | Microbial growth | Spoils a liquid preparation | Preservative, cold chain, validated hold These variables interact. A warm, wet powder loses activity faster than a cool, dry one, and a sucrose solution at 40 °C brings heat, water and microbial risk together. The question is never whether invertase is stable in the abstract; it is how long it holds its activity in a named pack at a named temperature. ## A stability protocol for the preparation A protocol should name the pack, the condition, the time points and the tests. One arm at 25 °C/60% relative humidity represents the warehouse, a second at 30 °C/65% adds a margin, and 40 °C/75% puts stress on the pack. Add a refrigerated arm if cold storage is recommended, and a solution arm at the process pH and temperature if the customer holds the enzyme in water. At each point, test activity, loss on drying, appearance, pH where relevant, and microbiology. Report the numbers rather than a pass statement, and identify the pack and the lot family. A summary for a 1 kg pouch does not transfer to a 25 kg drum: the headspace and the surface-to-volume ratio differ, and so does the way each pack is opened. ## The finished formula changes the target In a fondant or a soft centre, the enzyme is supposed to act. It hydrolyses sucrose during storage and keeps the centre soft, and the formulator sets the rate through dose, water activity and storage temperature. The target is a balance: an enzyme that is too stable leaves the centre hard, while too much activity turns it into a syrup that leaks. The enrobing temperature and the chocolate layer both play a part. In a dry blend the aim reverses: the enzyme has to survive until the consumer uses it, and the carrier, the moisture of the other ingredients and the pack decide whether it does. A liquid aims at a shelf life, with a preservative and a validated hold. The same bulk powder can be right for one format and wrong for another. ## How the shelf life is set No single shelf-life number applies to invertase; the answer depends on the pack and the storage condition. The retest period belongs on the specification, and the stability file for that pack is its support. A figure without a named pack, a storage temperature and a test panel is only a number. When the retest period ends, assay the retained sample again before extending use; never extend it by assumption, and never transfer a bulk figure to a repacked pouch or a liquid. The product hub shows the standard packs; the MOQ page covers the packs and the order window; the quality page describes the release file; the methods library explains the assay families; the loss-on-drying entry defines the moisture test. ### 04 Invertase MOQ: 1 kg pack, lead time and ordering URL: https://nutrition.rainwoodbio.com/products/enzymes/invertase/moq/ Reviewed: 2026-11-20 Invertase starts at 1 kg, packed in a 1 kg foil pouch; production quantities go in a 25 kg fiber drum. The standard lead time is 1–7 days. A firm quotation needs the activity basis, the pack, the destination and the documents, because the same word “invertase” covers preparations that are not interchangeable. In one lineThe 1 kg pouch is the smallest unit that carries its own lot code, so it is both the trial pack and the traceable sample. ## Why the minimum is 1 kg The pouch is large enough for a bench trial, a retained sample and an independent activity assay. It also ships as a parcel, which helps when material is needed before the production plan is fixed. Each pouch carries its own lot code; it is not a scoop taken from a drum. A smaller quantity is normally split from a larger lot and repacked. Handling goes up, the original pack identity is lost and traceability becomes harder, while the chemistry stays the same. At the other end, the 25 kg drum lowers handling per kilogram but ties up inventory and storage time. The minimum is about the pack, not about persuading a buyer to take more. ## Packs and formats Standard invertase packs | Format | Size | Where it fits | Handling | Foil pouch | 1 kg | Trial, sample or small run | Keep the seal tight after use | Fiber drum | 25 kg | Production | Lined drum; record the lot code | Granulated grade | On request | Better flow, less dust | A different particle profile The catalog form is an 80 mesh powder: ≥95% through 80 mesh. Granulation changes the specification; it is not a packing option. If the process needs a coarser, freer-flowing grade, raise it before the quotation, because the particle-size line and the lead time can both move. ## Lead time and dispatch Standard material is quoted at 1–7 days after the order is confirmed. Picking, document preparation and dispatch sit inside that window; freight transit, customs and the customer's own release do not. A custom granulation or an unusual pack adds time, and the quotation should show it as a separate line. Get the dispatch date in writing, not only the range. The pouch normally travels as a parcel and the drum on a pallet; the Incoterm decides who arranges freight and who handles customs entry. Lot documents should move with the goods rather than follow them. ## What a quotation needs A quotation is comparable when it answers six questions: - Identity. Invertase, EC 3.2.1.26 and CAS 9001-57-4, plus the production organism. - Activity. The unit definition, the sucrose substrate, the assay pH and temperature, and the release limit. - Quantity and pack. A 1 kg pouch, a 25 kg drum, or a granulated grade. - Destination and Incoterm. Country, address and trade term. - Documents. COA, specification, SDS, allergen and GMO statements, and any declaration the market requires. - Use and market. Food processing, a supplement blend or another use, and the country of sale. Without the activity definition and the market, the offer is incomplete. A preparation that suits one destination may sit outside the file for another, and the documents are part of what is being sold. Commercial terms belong on the quotation itself. ## The sample carries a lot code The pouch doubles as the qualification sample. Before scaling, test activity by the named method, loss on drying, microbiology and, where identity is in question, protein or a protein pattern. Keep a retained portion from the same pouch. Its lot code should appear on the COA and on the quotation. A trial below one kilogram is a split, not the catalog pack. It comes out of a bulk lot, acquires its own handling record and is not the 1 kg foil pouch. Request the split in writing and record its lot code beside the trial data. ## Terms to settle before the first order Put the commercial and quality terms on the same page: Incoterm, pack, dispatch window, specification revision, a COA per lot, the retest period, the retained sample and the change route. Agree them in a quality agreement before production starts, while the relationship is still easy. A disputed activity result is settled by re-testing the retained sample with the named method, not by photographs. Name the referee laboratory in advance, and state who bears its fee. The product hub lists the catalog values; the COA page explains the release tests; the stability page covers pack and storage; the MOQ glossary entry explains the term; the logistics page covers freight and paperwork. ### 05 The regulatory file for invertase URL: https://nutrition.rainwoodbio.com/products/enzymes/invertase/compliance/ Reviewed: 2026-11-20 Invertase is an enzyme preparation, so the regulatory question is not only whether invertase is permitted but which preparation, at what use level, in which food or supplement, and under which labelling route. In the EU, a technological use is framed by Regulation (EC) No 1332/2008 and the E 1103 specification; a digestive or nutritional use follows a different route. In the US, the file runs through a GRAS notice or another dietary-ingredient basis. The destination team owns that decision. In one lineThe certificate describes one lot; the regulatory file is what connects that lot to a permitted use and a label in the destination market. ## What the file has to hold together Four things have to agree. The specification must name the enzyme, the production organism, the carrier and the activity unit. The lot certificate must release that specification. The use level and the food category must sit inside the permitted conditions. The label must match the form and the use that the file covers. A change in any one of them reopens the file. The first fork is the use. A food enzyme that performs a technological function in a food is regulated as a food enzyme or a food additive. An enzyme sold for a nutritional or digestive purpose is not a food enzyme under the EU framework and falls under food-supplement or national rules. The same powder can therefore have two different files, and the label and the claims follow the file. ## European Union Regulation (EC) No 1332/2008 is the framework for food enzymes. It provides that the Union list must include E 1103 invertase and E 1105 lysozyme, with the conditions carried from Annex I and Part C of Annex III to Directive 95/2/EC. The Union list has not been adopted as of this review; national rules continue to apply, and Commission information points to 2028. Check the register and the transitional position before placing a lot. Where the E 1103 route applies, the specification in Regulation (EU) No 231/2012 is the reference. The monograph names Saccharomyces cerevisiae as the production organism and sets the purity and microbiological criteria. An invertase from another host is a different article and needs its own route. For a supplement use, the food-supplements framework does not harmonise enzymes, so the member state's rules and the safety file decide, not the food-enzyme list. ## United States An invertase preparation used in food is usually supported by a GRAS conclusion. GRAS Notice GRN 000088 covers an invertase enzyme preparation from Saccharomyces cerevisiae; later notices cover other production organisms. A GRAS notice is specific to the preparation, the organism and the intended use, so the notice number and the use conditions belong in the file. Invertase is not among the enzyme preparations affirmed in 21 CFR 184; the lactase entries at 184.1387 and 184.1388 are a different enzyme. For a dietary supplement, the dietary-ingredient basis is a separate question from the food use, and the label and claims are reviewed separately again. The buyer's team confirms the basis that extends to the finished product. ## Contaminants and activity limits The catalog limits are on the preparation, not on the finished product. The table compares the catalog heavy-metal limits with the E 1103 monograph where that route applies; the finished-product limit is a calculation from the dose. Heavy-metal limits: catalog against the E 1103 monograph | Parameter | Catalog limit | E 1103 monograph | What the buyer keeps | Lead (Pb) | ≤3 mg/kg | ≤5 mg/kg | Lot result, method and the finished-product calculation | Arsenic (As) | ≤2 mg/kg | ≤3 mg/kg | Lot result and method | Cadmium (Cd) | ≤1 mg/kg | ≤0.5 mg/kg | A tighter agreed limit if the E 1103 route applies | Mercury (Hg) | ≤0.1 mg/kg | Check the current monograph | Lot result and the limit relied on The cadmium line is the one to notice. The catalog limit of 1 mg/kg is wider than the 0.5 mg/kg in the E 1103 monograph, so a lot that meets the catalog can fail the EU specification. If the E 1103 route applies, agree the tighter limit and report cadmium per lot. The lead and arsenic limits are already tighter than the monograph. Microbiological criteria also differ. The catalog sets APC ≤1,000 cfu/g, yeast and mould ≤100 cfu/g, and absence of E. coli and Salmonella; the E 1103 monograph sets a total bacterial count and coliform criteria. The file should show the test that the destination requires, not the one that happens to be printed. ## Label and claims Invertase has no authorised health claim in the EU. A statement about what the enzyme does in the body is a claim, not a technical description, and it needs its own review under the claims framework. In the US, a structure/function claim has to be substantiated and must carry the DSHEA disclaimer; neither market permits a disease claim. No health claim is made here; the page is a specification reference. Activity figures are technical statements, not health claims. “100,000 U/g” describes the preparation; it says nothing about the effect in a person. Keep the two kinds of statement apart in the label and in the marketing copy. ## Documents for the invertase file The file should hold the COA with the activity method and unit definition, the specification version, the TDS and the SDS. Add the production-organism statement, the carrier and allergen statement, the GMO statement, the origin record and, for a liquid, the preservative and residual-solvent statements. For the EU, add the E 1103 specification check or the national route; for the US, the GRAS notice number and its use conditions. Source, process and pack stay under the supplier's change control. The destination route, the use level and the label review are the buyer's additions. When one of those documents changes, the version on the quotation and the version in the file have to change together. ## Checklist before the first order - Specification version, EC number, CAS and production organism are named. - Activity, unit definition, assay pH and temperature are on the COA. - The use level and food category sit inside the permitted conditions. - Heavy metals and microbiology are checked against the destination specification, not only the catalog. - The label and any claim have been reviewed for the destination. - COA, TDS, SDS, allergen, GMO and origin statements are on file. The invertase product page carries the catalog specification; the identity page explains the analytical checks; the EU regulatory notes and the US regulatory notes hold the framework references; the quality page describes the release file; the site's editorial policy sets the sourcing rules. ### 06 How to prove a lot is invertase, not just a sugar enzyme URL: https://nutrition.rainwoodbio.com/products/enzymes/invertase/identity/ Reviewed: 2026-11-20 Four independent lines have to agree before a lot can be called invertase: the paperwork names the enzyme, the sucrose assay is positive under the stated conditions, the protein pattern fits the preparation, and the production organism is the one declared. Activity by itself only shows a sucrose-hydrolysing preparation. The protein and the source supply the other two dimensions. In one lineIdentity is the activity on sucrose, the equimolar glucose and fructose, the protein pattern and the named production organism agreeing on one lot. ## The four identity layers Naming the enzyme on paper is not proof of what is in the drum. The four layers below answer different questions, and a supplier who addresses only the first has described a document rather than a preparation. Four layers of invertase identity | Check | What it asks | Evidence | What it establishes | Document | Are the enzyme and source named? | Name, EC 3.2.1.26, CAS, production organism | Paperwork only | Catalytic | Does it hydrolyse sucrose? | Activity assay at the stated pH and temperature | A sucrose-hydrolysing preparation | Protein | Is the protein pattern the expected one? | SDS-PAGE or SE-HPLC against a reference | The preparation, not the activity alone | Source | Is the organism the declared one? | Source statement, protein pattern, PCR where needed | The declared production organism A certificate that gives only the activity has answered the second question and skipped the other three. That is enough for a release decision on a known supplier and not enough for a new source. ## The two ratios to read The first is the product ratio: invertase hydrolysis of sucrose gives one molecule of glucose for every molecule of fructose. An HPLC check of the reaction products should show the two sugars in balance. A glucose-only result points to a glucoamylase or another glucose-releasing preparation, not to invertase. The second is the activity-to-protein ratio, or specific activity. Two preparations at 100,000 U/g can carry very different amounts of protein; a high figure with a low protein content is a concentrate, a low figure with a high protein content is a diluted or partly denatured preparation. The ratio is not a purity specification unless it is agreed as one, but it is a useful screen. The product ratio is not unique. Acid hydrolysis also gives glucose and fructose in balance, and a blend of the two sugars can imitate the result. The ratio is consistent with invertase action, not proof of it; the activity assay and the protein pattern carry the specificity. ## X-ray diffraction and the solid state X-ray diffraction is the wrong identity test for an enzyme powder. The protein is amorphous, so the pattern is broad; a sharp pattern comes from a crystalline carrier or an inorganic filler, not from the enzyme. A supplier who offers an XRD match as invertase identity has shown the solid form of something else in the powder. XRD still has a use as a carrier check. If the preparation is standardised on a crystalline carrier, the pattern can confirm which one, and an unexpected pattern can point to a substitution. Ask what the reference is. For the enzyme itself, use activity, SDS-PAGE or SE-HPLC, and the source record. This is the opposite of a mineral or a crystalline small molecule, where XRD is a direct identity test. The method has to match the material. ## What substitution looks like Common invertase substitutions and the signals | Substitute | Effect | What it looks like | Test that catches it | Amylase or glucoamylase | Acts on starch, not sucrose | Low sucrose activity; maltose, dextrins or glucose | Sucrose assay, product HPLC | Invert sugar or a sugar blend | No enzyme; the sugars are already there | No activity; the profile matches the blend, not the reaction | Activity assay, protein, product HPLC | Carrier dilution | Lowers units per gram | Activity and protein both low; ash or carrier high | Activity, protein, carrier check | Heat-killed preparation | Protein present, activity lost | Activity low; protein pattern intact | Activity assay at release | Different production organism | Similar activity, different protein | Protein pattern and source differ | SDS-PAGE, source statement The first two are the most common. A buyer who checks only the appearance and the sugar content can accept a blend that contains no enzyme. The activity assay is the release test that catches both, provided the unit and the method are the ones the specification names. ## How to write identity into the specification - “Invertase (β-fructofuranosidase), EC 3.2.1.26, CAS 9001-57-4.” - “Production organism and strain named.” - “Activity ≥100,000 U/g; unit definition, sucrose substrate, pH and temperature stated.” - “Protein or specific activity, where the preparation is a concentrate.” - “Loss on drying ≤5.0%; heavy metals and microbiology as listed.” - “Carrier named; no undeclared enzyme activity.” - “Destination market and use confirmed before the purchase.” ## Questions to put to the supplier - Which production organism and strain made this lot, and is it named on the certificate? - What is the exact unit definition, substrate, pH and temperature behind the U/g figure? - Can you provide the activity result, the protein figure and the SDS-PAGE or SE-HPLC pattern for this lot? - What is the glucose-to-fructose ratio when the lot acts on sucrose, and does the certificate show it? - If a result is challenged, will you join a re-test of the retained sample? Those answers, taken together, make an identity file; one activity figure does not. The product hub lists the catalog values; the COA page explains how the certificate reports them; the grades page compares the forms; the level-four comparison separates the two enzymes; the methods library explains the assay families. ### 01 What the COA for pectinase actually contains URL: https://nutrition.rainwoodbio.com/products/enzymes/pectinase/coa/ Reviewed: 2026-11-20 On a pectinase certificate, the important figure is an activity, and an activity is a measurement rather than a composition. The sheet should therefore show the assay substrate, the pH and temperature of the digest, the incubation time and the reducing-sugar standard beside the U/g, together with moisture, particle size, metals and microbiology. The limits below come from the catalog; the lot’s own figures belong in the result column. In one lineAn activity certificate is only as good as its assay description: the U/g, the pectin substrate, the pH and the temperature have to be read as one statement. ## Reading the activity row A row that reads “activity 32,400 U/g” and stops is not auditable. The reader cannot tell whether the digest ran at pH 3.5 or 5.0, on pectin or polygalacturonic acid, for 10 or 30 minutes, or whether the standard was glucose or galacturonic acid. Each of those choices moves the number, and some move it by tens of percent. The identity line on this product is “activity assay conform”. That is a functional statement: the powder digests pectin under the named method. It does not identify the production organism, and it does not separate a preparation from a blend that happens to show the same activity. Release specification · pectinase powder | Parameter | Method | Release limit | Appearance | Visual | Off-white to light tan, free-flowing powder | Identification | Activity assay conform | Conforms | Pectinase activity | Pectin-substrate assay, U/g | ≥30,000 U/g | Loss on drying | Gravimetric | ≤8.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh Particle size is a finishing line, not an activity line: 80 mesh describes the mill, and a screen change can move it while the enzyme is unchanged. ## What one unit represents A pectinase unit is a rate. In the common convention it is the quantity of enzyme that releases one micromole of reducing sugar, reported as galacturonic acid, in one minute under the assay conditions. Because pectin is a family of polymers rather than one molecule, the substrate’s esterification and the buffer pH decide how much of the preparation can act at all. The catalog figure is ≥30,000 U/g, and the definition behind it is part of the specification. Do not accept a certificate that quotes the figure but leaves the method to a conversation; the substrate, pH, temperature, time and standard are the method. Watch the moisture basis. A lot at 30,000 U/g with 7.2% loss on drying holds about 32,300 U/g of dry solids (30,000 ÷ 0.928). Both figures can be correct, and a specification written on one basis compared with a certificate on the other will look like a shortfall. A glucose standard and a galacturonic acid standard differ in the same way: different response, different number. Specific activity, in units per milligram of protein, is a fourth basis. It is not on the catalog sheet, but it shows whether the powder is mostly enzyme or mostly carrier. ## Limit and result The catalog limit is one-sided. A lot at 30,800 U/g passes, and so does one at 46,000 U/g; the second simply leaves more activity for the process to consume. The result tells the formulator what arrived, while the limit only says whether it was accepted. An auditable result also carries a release date and the storage assumption behind the guarantee. Activity is not static, so the certificate should state what remains at the end of the retest period, not only what was measured on the day of release. What makes an activity result auditable | Element | What to look for | Why it moves the U/g | Standard curve | Standard identity, range and fit | Glucose and galacturonic acid read differently | Reagent blank | A blank subtracted from each digest | A carrier with reducing sugar inflates the result | Dilution | The dilution factor and the diluent | An unbuffered diluent can shift the pH | Incubation | The time and temperature actually used | A longer digest reads higher until substrate runs out | Calculation | The formula and the dry-matter correction | As-is and dry-solids results are different figures Repeatability belongs beside the result. If the method’s relative standard deviation is wide, a lot a few percent above a one-sided limit may fail a retest, and the buyer should know that before the drum is opened. ## Why lots differ Three stages move the activity. The fermentation sets the mixture: strain, carbon source, induction and harvest decide which pectinases are present. Downstream processing decides how much of that mixture survives clarification and concentration. Standardisation, usually with a carrier, decides the final units per gram. Drying and milling add a fourth variable. Heat during drying can denature protein, and a powder that is wetter than the last lot reads lower per gram even if no protein was damaged. A darker colour can be a drying signal or a normal variation; it is worth a batch-record check, not an automatic rejection. Finally, the assay itself drifts. A new substrate lot, a fresh buffer or a different incubation time can shift results between certificates that both claim U/g. ## When a referee is needed A referee laboratory earns its place when the source is new, when the lot is the first into a regulated market, when a specification limit is disputed, or when a label depends on the activity figure. The useful panel is activity by the buyer’s method, protein, moisture, microbiology, metals by ICP-MS and a protein pattern by gel electrophoresis. The outside laboratory must use the specification’s substrate, pH and temperature; otherwise the exercise compares laboratories. Ask for detection limits with the metal results, and keep the tested sample as the retained sample with the lot code on both. For a new source, add the side-activity profile and the organism. A preparation can hit the same U/g and still behave differently in a tank if its pectinesterase content has changed. ## A supplier comparison that holds Compare method sheets before comparing numbers. Ask for the unit definition, substrate, pH, temperature and standard; the last three certificates; the protein or specific activity; the carrier statement; and the production organism. A quotation that gives only U/g has left five of those six open. Then check the chain of identity: the certificate, the pouch and the retention sample should all carry the same lot code, and the certificate should name the organism that made the enzyme. A genuine certificate attached to the wrong drum is still a traceability failure. The catalog numbers are published on the pectinase product page; the identity tests are set out on the identity page; the release sequence is set out on the quality page; and the assay vocabulary sits in the methods section. ### 02 Pectinase grades: activity, form and what changes URL: https://nutrition.rainwoodbio.com/products/enzymes/pectinase/grades/ Reviewed: 2026-11-20 Pectinase is a preparation, not a single protein, so a grade has to describe more than a number. The catalog item is a ≥30,000 U/g powder milled to 80 mesh; activity, the assay behind the number, side activities, carrier and particle size are the five things that change when a buyer moves to a granulated or custom-activity variant. Each of those changes the weigh-out or the certificate, and some change both. In one lineA pectinase grade is a specification bundle, not a single activity number: the assay, the side activities, the carrier and the particle size all travel with the U/g. ## A name that covers a mixture Pectin is a heterogeneous polymer: a galacturonic acid backbone, methyl esters in places, and rhamnose-rich stretches with side chains. No single enzyme takes it apart. A fermentation produces polygalacturonase, pectinesterase, pectate lyase and other proteins, and the preparation that reaches the drum is a selected slice of that mixture. The U/g counts only what the named substrate and assay can see. Two powders at 30,000 U/g can still differ in how quickly they de-esterify a pectin, how they perform at a juice pH, and how much of the gram is carrier. That is why a grade is sold as a bundle and why a purchase order that names only the activity has not finished the specification. ## Catalog powder and agreed variants Pectinase grades and the terms that change | Grade | Activity | Physical form | Where it fits | What to re-agree | Catalog powder | ≥30,000 U/g by the pectin-substrate assay | 80 mesh powder | Juice, fruit and powder blends | Nothing; this is the baseline | Granulated | Standardised to the same U/g | Granule, on request | Dust control and flow | Sieve, dissolution, assay sampling | Concentrate | Above 30,000 U/g, agreed | Powder | A smaller weigh-out | Method range, moisture, stability | Dilution | Below 30,000 U/g, agreed | Powder plus carrier | Small batches, easier weighing | Carrier, micro load, label declaration Only the first row is a catalog item. The other three are agreements: each gets its own specification, certificate and, where a carrier is added, a label that names it. “On request” describes a specification change, not a stock keeping unit. ## What the form changes in handling The catalog powder is fine, off-white to light tan, ≥95% through 80 mesh, and dissolves in water to a clear to slightly turbid solution. Fine powder wets quickly but makes dust, and enzyme dust is a respiratory sensitiser; the SDS and the dust controls are part of choosing a grade, not an afterthought. A granule flows better and raises less dust, but it can wet more slowly. A hard granule may sink and lump in a mix tank; a soft one breaks down faster. Granulation usually brings water and heat, and both can cost activity, so the granulated grade needs its own assay rather than the base powder’s certificate. Sample the granule, not the fines, when the lot is checked. Colour follows drying and the carrier. A granulated or diluted grade may be lighter or more uniform than the base powder while carrying the same activity. Read colour as a process signal, not as a statement about strength. ## From units to grams The certificate gives units per gram of preparation, so the weigh-out is the units the process needs divided by the U/g. A trial that calls for 600,000 U takes 20 g of the 30,000 U/g powder, 10 g of a 60,000 U/g concentrate, or 20 g of a granulated grade standardised to the same figure. These are process quantities, not a human dose and not a recommendation. Two corrections belong in the same sum. First, the process consumes activity: heat, a pH outside the working window and a long hold all remove units before the product is packed. Second, the certificate may be on dry solids while the balance weighs as-is powder. Measure activity in the matrix at the end of the step, not only on the powder that went in. A pectinase U/g cannot be converted to a cellulase CU/g. The units rest on different substrates and different assays, with no factor between them; the pectinase and cellulase comparison explains why. ## What the specification should say - “Pectinase preparation, CAS 9032-75-1, production organism named.” - “Activity ≥30,000 U/g by the pectin-substrate assay; unit definition, substrate, pH, temperature and incubation time stated.” - “Loss on drying ≤8.0%; ≥95% through 80 mesh.” - “Heavy metals Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg; microbiology as listed.” - “Side-activity profile for polygalacturonase, pectinesterase and pectate lyase where the process depends on it.” - “Carrier or granulation aid named; pack and storage condition stated.” - “Destination market and intended use confirmed before the order.” ## When another grade is the wrong choice If the target polymer is cellulose, no pectinase grade will replace a cellulase, whatever the U/g says. If the process runs alkaline or hotter than the enzyme’s window, more activity does not rescue the reaction. If the label has to name one enzyme, a multi-activity preparation makes that label harder to write, and a dilution adds a carrier that must be declared. A liquid application cannot simply dissolve the powder and call it a liquid grade: water brings a hold time, a preservative question and a microbial risk that the dry powder does not have. Pick the grade against the process first, then write the specification and the label around it. The specification is published on the pectinase product page; the assay vocabulary is in the methods section; the cellulase option is on the cellulase product page; the release sequence is set out on the quality page. ### 02.1 Pectinase vs cellulase: two substrates, two units URL: https://nutrition.rainwoodbio.com/products/enzymes/pectinase/grades/pectinase-vs-cellulase/ Reviewed: 2026-11-20 Pectinase and cellulase are both carbohydrate enzymes, but they act on different polymers: pectinase on the α-1,4-galacturonan backbone of pectin, cellulase on the β-1,4-glucan backbone of cellulose. Their activity units are defined by different substrates and different assays, so a pectinase figure in U/g and a cellulase figure in CU/g cannot be converted into one another. The choice is made by the substrate in the process, not by the size of the number. In one lineTwo carbohydrate enzymes, two substrates and two units: a pectinase U/g and a cellulase CU/g describe different reactions and have no conversion factor. ## Pectin and cellulose are different polymers Pectin is a family of acidic polysaccharides built on a backbone of α-1,4-linked D-galacturonic acid. Part of that backbone is methyl-esterified, and the “hairy” regions carry rhamnose and side chains. Cellulose is a linear chain of β-1,4-linked D-glucose, packed into crystalline and amorphous regions. The two differ in the monomer, the linkage and the solid-state organisation, and an enzyme that fits one backbone does not fit the other. Pectin and cellulose side by side | Property | Pectin | Cellulose | Monomer | D-galacturonic acid | D-glucose | Backbone linkage | α-1,4 | β-1,4 | Methyl esters | Common on the galacturonic acid | None | Where it sits | Middle lamella and fruit cell wall | Primary cell wall and plant fibre | Enzymes that act | Polygalacturonase, pectinesterase, pectate lyase | Endo-glucanase, cellobiohydrolase, β-glucosidase | Main products | Galacturonic acid and its oligomers | Cellobiose and glucose Pectinase lowers the viscosity of a pectin solution and releases galacturonic acid; cellulase releases glucose from cellulose and has little action on a pectin chain. A trial with the wrong enzyme often shows a small or slow effect rather than a clear failure, so check the substrate before the trial. ## U/g and CU/g are two scales Both units measure activity, and both are quoted per gram of preparation, but they are defined on different substrates and against different standards. The pectinase unit is defined by a pectin-substrate assay, commonly as the amount of enzyme that releases one micromole of reducing sugar, expressed as galacturonic acid, per minute. The cellulase CU is defined on carboxymethyl cellulose, usually as the amount of enzyme that releases a set quantity of reducing sugar, expressed as glucose, per minute, or as the amount that produces a defined change in the viscosity of a CMC solution. Two activity units and what each one counts | Unit | Defined on | Common standard | What it counts | Pectinase U/g | Pectin or polygalacturonic acid | Galacturonic acid or reducing sugar | Hydrolysis of the pectin backbone | Cellulase CU/g | Carboxymethyl cellulose | Glucose equivalents, or a viscosity end point | Endo-glucanase action on soluble cellulose There is no factor between the two. A preparation at 30,000 U/g and a preparation at 50,000 CU/g are not “30,000 versus 50,000” of the same thing; they are readings from two assays that share only the word “unit”. Converting one to the other would be like converting a length to a weight. CU and FPU measure different things: CU is defined on soluble CMC, while FPU is defined on filter paper and therefore reads action on insoluble cellulose. The two can diverge, because a CMC assay rewards endo action and says little about attack on a crystalline surface. ## The assay conditions decide the number Each unit is only complete with its conditions. For pectinase, the substrate (pectin or polygalacturonic acid), the degree of esterification, the pH, the temperature, the incubation time and the reducing-sugar standard all move the result. For cellulase, the substrate (CMC or filter paper), the viscosity grade, the pH, the temperature and the detection chemistry do the same. A certificate that says “30,000 U/g” without them has not defined the unit. The same powder can read differently in two laboratories that believe they run the same method: a pH difference of half a unit, a different substrate lot or a shorter incubation is enough. Compare methods before numbers. For a purchase specification, name the method, not only the unit. If the buyer will release against an in-house assay, exchange the method before the first lot; otherwise certificate and goods can disagree while both are technically correct. ## A number is not a profile Both products are preparations, not single proteins. A pectinase preparation usually contains polygalacturonase, pectinesterase and pectate lyase, and the balance between them decides how it handles a highly esterified pectin. A cellulase preparation usually contains endo-glucanase, cellobiohydrolase and β-glucosidase, and the balance decides how far it takes cellulose hydrolysis. A high main activity with a poor side-activity balance can underperform a lower number with a better balance. Specific activity, units per milligram of protein, separates a concentrate from a carrier-extended powder; ask for it when the process depends on rate or end product. ## Why one cannot replace the other Substituting pectinase for cellulase, or the reverse, changes the reaction, the unit and the dose. Pectinase will not break a cellulose fibre, and cellulase will not clear a pectin haze. A cellulase preparation with a side activity on pectin can produce a confusing bench result: the juice clears a little, and the trial is read as a cellulase effect when the side activity did the work. The commercial consequences follow the chemistry. A switch changes the grams weighed, the certificate cited and, if the label names the enzyme, the ingredient declaration. It should be a written change with a new specification and a new trial, not a line item swapped on a purchase order. ## When a blend is the right answer Some plant materials contain both pectin and cellulose, and a blend can be the practical choice. If a blend is used, declare each activity with its own unit and assay, and release the blend against both. Do not add a pectinase U/g to a cellulase CU/g and call the total “activity”; the sum is meaningless. The two enzymes also need a compatible pH and temperature window: if one is outside its working range in the matrix, the blend is only as good as the enzyme that still works. Check the order of addition, the hold time and each activity’s stability, and keep both lot identities. ## How to choose Choose pectinase when the target is pectin: a fruit or juice haze, a pectin-rich mash, or a cloud that has to be controlled. Choose cellulase when the target is cellulose: a plant fibre, a cell-wall material or a cellulose-derived substrate. Choose a blend only when both polymers are present and a bench trial shows that each activity contributes. The pectinase product page carries the catalog specification; the cellulase product page carries the CU/g specification; the grades page sets this comparison beside the other activity and form options; the methods section covers the assay vocabulary; the quality page describes the release workflow. ### 03 Pectinase stability: heat and moisture set the activity URL: https://nutrition.rainwoodbio.com/products/enzymes/pectinase/stability/ Reviewed: 2026-11-20 Pectinase is a protein, and its activity is lost through two linked routes: heat unfolds the protein, and water makes that unfolding faster and easier. The catalog format is a sealed foil pouch kept cool and dry; a dissolved preparation is a short-lived intermediate that needs a validated hold, not a bulk stock. A retest period belongs to a pack and a storage condition, not to the molecule on its own. In one linePectinase keeps its activity only while the protein stays cool and dry; the pack, the storage temperature and the time in solution set what is left. ## The powder Release allows up to 8.0% loss on drying. That is a ceiling for the lot, not a target for storage: a powder sitting at the ceiling has little margin left for the humidity it will meet after the pouch is opened. Water uptake raises the loss on drying, lowers the activity per gram and can darken the colour, and none of those changes is visible from the outside of the pack. The foil is the barrier, and the seal is the weak point. A folded-over opening is not a heat seal, and the air that enters carries moisture. In a humid store, a desiccant helps, but it does not replace closing the pack. After cold storage, let the sealed pack come to room temperature before opening, so condensation does not form on the powder. Colour is worth recording at each stability point. A darker tan can follow a hot dry or a long hold, and it may appear before the assay has fallen far enough to fail a release limit. ## Once dissolved Water starts the clock. A hydrated enzyme is less stable than the same protein in a dry powder, and a warm solution is less stable again. The liquid also supports microbial growth, which is a separate problem from the enzyme’s own decay and can change the pH as it proceeds. A liquid process needs a pH inside the working window, a low hold temperature, a validated time before filling and a hygiene step that matches the risk. Preservatives and refrigeration slow the loss; they do not restore units that have already gone. The solution can stay clear while the activity falls, so appearance is not a stability test. A result from the bulk powder does not transfer to a juice or a liquid blend. The matrix, the heat step and the pack change the rate, and the finished liquid needs its own data. ## What removes activity Storage and process factors that cost pectinase activity | Factor | Effect on the preparation | Practical control | Temperature | Protein unfolding; faster at every step above ambient | Cool store; count the heat in the process | Water | Raises loss on drying; lowers units per gram | Keep the pouch sealed; limit open time | pH | Moves the enzyme away from its working window | Check matrix pH; buffer the hold if needed | Iron and copper | Inactivation at the enzyme’s active site | Use compatible contact materials | Microbes | Consume the preparation in a liquid | Hygiene, preservative, cold hold | Foam and shear | Protein collects at the air interface and denatures | Gentle mixing; control the foam These effects combine. Warmth and humidity together are worse than either on its own, and a warm solution at the wrong pH adds a third strain. The question to ask is therefore specific: which pack, which temperature, which matrix, how long? ## Designing the study The study should name the pack, the storage condition, the sampling times and the tests. A warehouse arm at 25 °C/60% relative humidity and a 30 °C/65% arm cover normal storage; 40 °C/75% is the stress arm. If the pack is not opaque, add a light-exposure arm. At each point, run activity by the release method and the same unit definition, plus loss on drying, appearance and microbiology. For a juice, a blend or a stick pack, run the study again in the matrix, at the process pH and with the same heat load. The report should list each result, name the pack and identify the lot family; a pass line alone is not enough. The data has to match the pack being bought. The drum and the pouch differ in headspace and in how often they are opened, and the drum’s inner liner is part of its barrier. A summary written for another pack does not answer the question. ## The process is part of the question Juice making adds heat through pasteurisation or hot fill, and the enzyme may go in before, during or after that step. What matters is the activity at the point where it acts, not the activity printed on the certificate. A dry blend avoids the heat but can separate; a tablet adds compression; a capsule shell can pass moisture into the fill. A stick pack fails at a seal, and a pinhole is enough. None of these formats inherits the bulk pouch’s retest period. Whether an overage is needed is a formulation and label decision, and it cannot compensate for a pack that lets water in. ## Assigning a retest period No single shelf-life figure is published for pectinase; the pack and the storage condition determine it. The retest period belongs in the specification and is backed by data for that pack. Offering a figure with no pack, no condition and no test panel makes it an assumption, not a shelf life. At the end of the period, test the retained sample again before extending it. Do not extend by default, and do not transfer a bulk figure to a repacked container. An opened pouch also needs an in-use period and a storage instruction. The standard packs are on the product page; release tests are on the COA page; pack sizes and lead times are on the MOQ page; the release sequence is set out on the quality page. ### 04 Pectinase: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/enzymes/pectinase/moq/ Reviewed: 2026-11-20 The pectinase minimum is a single 1 kg foil pouch; production runs use the 25 kg fiber drum. Standard packs are dispatched in 1–7 days. A quotation becomes firm only when it names the activity and its method, the pack, the destination and Incoterm, the documents and the intended use. In one lineOne kilogram is the floor because a pouch that size is the smallest unit with its own lot code, retention sample and certificate. ## A minimum set by traceability One kilogram covers three needs: a bench trial, a sample kept for reference and an independent test, and it travels as a parcel rather than a pallet. More importantly, it is a sealed commercial pack carrying a lot code: the powder in the trial, the powder in the retention cabinet and the powder described on the certificate can be shown to be the same material. Smaller quantities are normally split from a larger lot. The split has to be opened, weighed and repacked, which adds handling, creates a new container without the original seal and makes the link to the manufacturing lot weaker. The chemistry may be untouched, but the traceability is not. At the other end, a 25 kg drum lowers the handling per kilogram and commits inventory. An enzyme preparation is not improved by sitting in a warehouse, so the drum makes sense for a production campaign, not for a first trial. The minimum is a unit of control rather than a sales threshold. ## Packs Pectinase pack formats | Pack | Net weight | What it is for | Constraint | Foil pouch | 1 kg | Trial, retention, small batch | Reseal after opening; moisture barrier is the foil | Fiber drum | 25 kg | Production campaign | Inner liner must stay closed; record the opening date | Granulated powder | Agreed | Dust control and flow | Separate specification and assay The catalog powder is milled to 80 mesh. Granulation is a different specification rather than a larger bag: the sieve result, the flow and the way a sample is taken all change. Ask for it before the offer is written, because it can move the dispatch date as well as the specification. ## Dispatch, not delivery The 1–7 day figure runs from order confirmation to dispatch. It includes picking, the lot documents and handover to the carrier. It does not include transit, customs or the buyer’s own quarantine and release, and those can dominate the calendar on an export route. Get the dispatch date in writing. The pouch normally travels as a parcel; the drum is palletised. The trade term fixes who arranges the movement and who clears the border. The certificate and the other lot papers should travel with the goods, not follow them. ## Six details that fix an offer - Identity. Pectinase, CAS 9032-75-1, and the production organism. - Method. Activity, substrate, pH, temperature, incubation time and unit definition. - Pack. A 1 kg pouch, the 25 kg drum, or a granulated or diluted variant. - Route. Destination and Incoterm. - Papers. COA, specification, SDS and any statement the importer needs. - Use. Juice processing, a blend or another application, and the market of sale. If the method is missing, two offers cannot be compared even when both say 30,000 U/g. If the use is missing, the document pack cannot be checked against the destination. Commercial terms are quoted separately and are not listed on this page. ## Qualifying with the sample Make the 1 kg pouch the qualification lot. Run activity by your own method, check moisture, microbiology and a protein pattern, and hold back a portion of that same pack as the retention sample. The pouch, the certificate and the quotation should carry the same lot code; a sample that cannot be tied to a lot is a demonstration. A trial that needs 200 g is a repack, not the catalog pouch. It comes out of a bulk lot, carries its own handling record and is not the 1 kg foil pack. Put the split in writing and keep its code with the trial results. A bench sample and a production drum can be different lots even when the specification matches. ## Before the first production order Agree the commercial side and the quality side at the same time: trade term, pack, dispatch window, specification revision, a certificate for each lot, a retention sample, the retest period and how changes will be handled. A quality agreement signed before the campaign is easier than a dispute afterwards. If a lot fails the agreed limit, the case rests on the retained sample and a joint test by the named method, not on a photograph of the drum. Name the referee laboratory, the method it will use and who pays for it in advance. A return based on appearance alone is difficult for either side to defend. The specification itself is published on the product page; the release tests are listed on the COA page; market documents are on the compliance page; assay terms are in the methods section. ### 05 The regulatory file for pectinase URL: https://nutrition.rainwoodbio.com/products/enzymes/pectinase/compliance/ Reviewed: 2026-11-20 Pectinase can be a processing aid in a juice plant or an ingredient in a capsule, and those two uses lead to different regulatory files. The specification and the certificate describe the powder; the destination and intended use decide which rules apply. This page maps the file a buyer’s regulatory team will need; it does not choose the route for them. In one lineThe material file proves what the powder is; the market file proves where it may be used and how it must be labelled. ## Start with the use An enzyme added to clarify juice is a food enzyme or a processing aid. The same powder swallowed in a capsule is a dietary ingredient, and the two classifications carry different documents, different label rules and different limits. The production organism, the carrier and the activity method sit inside whichever classification applies. Four elements form the core of the file: the specification version, the lot certificate, the finished-product rules for the destination and the change record. The COA reports one lot; the TDS holds the specification; the SDS addresses handling. None of them decides the market route. That decision is recorded separately, with the citation that supports it. ## European Union Food enzymes fall under Regulation (EC) No 1332/2008, which provides for a Union list of authorised enzymes and the conditions of use. As of this review the Union list has not been adopted in full, so national rules and transitional arrangements still matter; confirm the current position for the destination. The source organism and the specification are part of the authorisation question. For a supplement, Directive 2002/46/EC and Regulation (EU) No 1169/2011 on food information apply alongside. If the preparation has no history of use in the Union, Regulation (EU) 2015/2283 on novel foods may be engaged. The buyer’s team records which route applies and keeps the citation with the specification version. ## United States For a food use, a pectinase preparation needs a GRAS basis or a food-additive regulation. The FDA GRAS notice inventory includes pectinase preparations from Aspergillus niger, each limited to its own source and use; a notice for one organism does not cover another, and a food-use basis does not automatically cover a supplement. As a dietary supplement, the preparation is a dietary ingredient under the FD&C Act, and the Supplement Facts panel follows 21 CFR 101.36. The supplier names the basis and the supporting document; the buyer confirms that it reaches the finished product and the claim. ## Contaminants Contaminant limits apply to what is eaten, so a drum result has to be carried through the dose. In the EU, Regulation (EU) 2023/915 sets maximum levels for lead, cadmium and mercury in food supplements; arsenic is not harmonised and is set by the customer or the market. Check the current text and the daily dose before fixing the limit. Contaminants to convert to the finished dose | Parameter | Level to check | Evidence in the file | Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method and dose calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception | Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result and method | Arsenic (As) | Customer or market limit | The agreed limit and the method Microbiology is a release limit for the powder. A low-dose use dilutes its contribution to the finished product; a high-dose blend does not. The calculation, not the certificate alone, is what the reviewer will check. ## Claims and label language Neither market allows a disease-related claim for this material. In the EU, the wording must fit the food or supplement category and the authorised use; in the US, a structure/function claim requires substantiation and the DSHEA disclaimer. Describing the hydrolysis of pectin is a technical description, not a health claim, and putting the powder in a capsule does not change that. The unit definition belongs in the claim file too. “30,000 U/g” without the substrate and the method is not a statement a reviewer can check, and it is not a basis for comparison with another enzyme. Name the preparation and the activity as the specification does, and do not borrow a number from a different unit scale. ## The document pack - COA with activity, unit definition, loss on drying, heavy metals and microbiology. - Specification version, TDS and SDS. - Production organism and strain, with the source record. - Allergen statement for the source and the carrier; GMO statement. - Residual-solvent statement, carrier statement and origin record. - Change-control route for source, process, carrier and pack. The destination route, the finished dose and the label review go on top. A missing document is simpler to fix at quotation than at the port, so name the gap before the order moves. The COA page shows what the lot certificate reports; the identity page covers the source and adulteration evidence. ## Before the first shipment - CAS number, organism and specification revision are fixed. - The COA, TDS, SDS, allergen, GMO, carrier and origin papers are present. - The metal results are converted to the finished dose. - The EU food-enzyme position and the national rule are recorded. - The US basis is named and covers the intended use. - Label and claim review is complete for the destination. - The quotation, specification and certificate cite the same revision. The specification itself is published on the product page; the release sequence is set out on the quality page; the assay terms are in the methods section; the analytical evidence sits on the identity page. ### 06 How we prove a pectinase lot is the named preparation URL: https://nutrition.rainwoodbio.com/products/enzymes/pectinase/identity/ Reviewed: 2026-11-20 No single assay identifies an enzyme lot. The file has to connect the source organism, the pectin-digesting activity, the protein pattern, the side-activity profile and the mass balance; each answers a different question and each can fail on its own. A high U/g with no source and no protein data is a result without an identity. In one lineA pectinase identity file links the source organism, a defined activity assay, a protein pattern and a mass balance; no single number carries the proof. ## The chain of evidence A supplier can print the right name, the right CAS number and a passing activity on one page and still not show that the powder is the preparation it claims. The five layers below are separate questions. Each needs its own result, and a gap in any one of them weakens the conclusion. Five layers of pectinase identity | Layer | Evidence | What it catches | Source | Organism, strain and source record | A preparation from an unnamed or different producer | Activity | Pectin-substrate assay with its conditions | A powder that does not digest pectin | Protein | Protein pattern by gel electrophoresis | A non-enzyme filler or a different preparation | Side activities | Pectinesterase and pectate lyase results | A preparation that will behave differently in the tank | Mass balance | Activity, protein, moisture and carrier | An undeclared dilution ## Ratios that describe the preparation Pectin is methyl-esterified in places, and the methyl groups have to come off before polygalacturonase can cut the backbone freely. A preparation with strong polygalacturonase and weak pectinesterase can slow down on a highly esterified pectin, while a different balance moves faster on the same juice. The headline U/g does not show that balance. Specific activity, in units per milligram of protein, is the first useful ratio: it separates an enzyme-rich powder from one that is mostly carrier. The second is the proportion of the main activity to the side activities, measured on the same sample. Neither figure is on the catalog specification, so ask for them when the process depends on behaviour rather than on the headline number. A ratio is not a purity grade. A preparation can be highly active per milligram of protein and still carry an unwanted side activity, and a modest specific activity can be normal for a standardised powder. Read the ratios with the mass balance, not instead of it. ## What X-ray diffraction can show X-ray diffraction asks whether a solid is crystalline and whether its pattern matches a reference. An enzyme powder is normally amorphous, so the pattern is a broad halo rather than a set of sharp lines. Sharp lines in a product sold as pure enzyme point to a crystalline carrier, a salt or an inorganic filler. That makes XRD a check on the carrier, not on the enzyme. It can reveal a crystalline diluent in a “pure” preparation and can compare the solid state of two lots, but it cannot tell pectinase from cellulase. Request the reference diffractogram and the method’s detection limit before accepting a “match” statement, and do not accept an XRD line as identity evidence by itself. ## Signals of substitution Pectinase substitutions and the evidence against them | Adulterant | Signal | Test | Inert carrier | Low U/g with a normal appearance | Mass balance, protein, carrier identification | Heat-damaged powder | Low units per milligram of protein; darker colour | Activity plus protein, batch record | Another enzyme | Wrong side-activity profile | Substrate panel, protein pattern | Reducing-sugar carrier | High reagent blank; low protein | Blank subtraction, protein | Water | Low as-is activity; dry basis normal | Loss on drying, dry-basis calculation Appearance proves the least. Off-white to light tan covers a wide range, and a darker powder can be a normal drying result or a damaged lot. The stronger signals are the specific activity, the side-activity profile and the mass balance. A certificate with appearance and U/g but no protein and no profile has not tested the likely substitution. ## Writing identity into the specification - “Pectinase preparation, CAS 9032-75-1, production organism and strain named.” - “Activity ≥30,000 U/g by the pectin-substrate assay; unit definition, substrate, pH, temperature and incubation time stated.” - “Protein and specific activity reported where agreed.” - “Side-activity profile for polygalacturonase, pectinesterase and pectate lyase where the process depends on it.” - “Loss on drying ≤8.0%; ≥95% through 80 mesh.” - “Metals and microbiology as listed; carrier named and no undeclared diluent.” - “Pack, storage condition and retest period stated.” ## Five questions for the supplier - Which organism and strain produced this lot, and can the source record be released? - What are the unit definition, substrate, pH, temperature and incubation time? - What are the protein content and the specific activity? - Which side activities are present, and what is their profile in this lot? - Will you keep a retained sample and accept a joint test against the named method? Together the five answers make an identity file; an activity percentage alone does not. The specification is published on the product page; the certificate lines are explained on the COA page; the assay terms are in the methods section; the release sequence is set out on the quality page. ### 01 What the COA for phytase actually contains URL: https://nutrition.rainwoodbio.com/products/enzymes/phytase/coa/ Reviewed: 2026-11-20 A phytase certificate reports activity in FTU per gram, and that figure is a rate: sodium phytate is the substrate, pH 5.5 and 37 °C are the conditions, and inorganic phosphate is the readout. The same sheet carries appearance, loss on drying, the heavy-metal panel, microbiology and particle size. The catalog specification here is ≥10,000 FTU/g, and a batch COA is tied to the pack it released. In one lineA phytase result is a rate in FTU/g, and it means something only with the substrate, the pH, the temperature and the blank that produced it. ## Reading the certificate line by line A certificate can be audited when every line answers three questions: what was measured, by which method, and against which release limit. A row that says “conforms” gives the conclusion but not the measurement. For an enzyme, the activity line is the product itself. Release tests and methods · phytase powder | Parameter | Method | Release limit | Appearance | Visual | Off-white to light tan powder | Activity | Sodium-phytate assay, inorganic phosphate readout, pH 5.5, 37 °C | ≥10,000 FTU/g | Identification | Activity assay conform | Conforms to the reference | Loss on drying | Gravimetric | ≤8.0% | Heavy metals | ICP-MS, as stated on the certificate | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh Identification by activity assay is a legitimate entry for an enzyme preparation: if the powder catalyses the defined reaction under the defined conditions, it is the material the method recognises. That entry only works when the method travels with it. Without the substrate, the pH and the standard, “assay conform” describes a procedure the reader cannot see. ## What one FTU is, and why the blank matters One FTU is the amount of enzyme that releases one micromole of inorganic phosphate per minute from sodium phytate at pH 5.5 and 37 °C, the definition used in EN ISO 30024. That is why an activity figure cannot be read without its method: a laboratory that runs the incubation at a different pH, temperature or substrate concentration is measuring a different rate and may still print the same three letters. Two details decide whether the number is real. The first is the blank. The powder can carry phosphate from the fermentation medium or from the carrier, and the colorimetric readout counts total inorganic phosphate rather than only the phosphate the enzyme released. A sample blank stopped before incubation is subtracted from the reading. Leave it out and a lot with added phosphate reads high while carrying less enzyme. The second is the basis. Activity is reported per gram of powder as received, not per gram of dry matter, so the loss on drying belongs beside it. Water dilutes the powder: a lot at 8.0% moisture holds less enzyme per gram than a lot at 4.0% at the same printed activity. Neither figure alone describes the material. pH 5.5 is also a condition of the assay, not a description of the gut. Activity measured there does not show how much enzyme survives an acidic stomach. That is an application measurement, and it belongs in the trial file rather than on the release certificate. ## The limit and the measured result Activity is a floor, not a target. A lot at 10,300 FTU/g and a lot at 13,800 FTU/g both pass ≥10,000 FTU/g, and the second carries more headroom into a process step that will consume part of it. The result column is where that difference becomes visible; a column that repeats the limit tells the reader nothing. The result column, line by line | Parameter | Release limit | Result column | Activity | ≥10,000 FTU/g | A measured figure in FTU/g, with the method reference and the release date | Loss on drying | ≤8.0% | The measured percentage | Heavy metals | Per element | A figure per element in mg/kg | Microbiology | Counts and absence | The lot's count and absence statement | Particle size | ≥95% through 80 mesh | The measured percentage through the sieve Two dates matter as much as the numbers: the release date and the end of the declared shelf life. Activity falls in storage, so a specification that guarantees 10,000 FTU/g at release does not describe the same drum six months later. Ask which date the limit applies to, and get the answer on the specification rather than in an email. ## Batch-to-batch variation Fermentation titre, recovery yield, carrier loading and drying move the activity per gram. Granulation moves the particle-size result and the dust; it need not move the activity when the preparation is standardised after granulation. The assay itself has a repeatability, so a result only a few percent above a one-sided limit is worth a retest. Colour and odour are the least quantitative lines and often the first to raise a question. A darker or duller powder can come from a different drying step while the activity still passes. Use appearance to open the question, then settle it on the measured lines. A trend across lots says more than any single result near an edge: activity drifting down toward the limit, moisture climbing, or a carrier change that shows up as a different sieve result. The lot code on the certificate, the pouch, the drum and the retained sample should all agree. ## When an outside laboratory is worth it An independent assay is worth ordering when the source is new, when a lot is the first into a regulated market, when the activity figure is disputed, or when a lot may have seen heat in transit. The panel worth paying for is not a copy of the certificate: activity by the named method with its blank and standard curve, loss on drying, protein for specific activity, heavy metals, microbiology, and a pH-activity profile when the source is in question. The laboratory should state its detection limit and its repeatability next to each result. A “not detected” entry that carries no limit describes the method, not the sample. Custody matters as much as the method: the sample assayed should be the sample kept, and the report should name the lot. When a result is contested, the referee should receive three things: the retained sample, the supplier's certificate and the specification. The request is the measurement that separates the two claims, not another run of the same assay. ## Comparing two offers Six lines make the comparison: unit definition and method reference; activity result with loss on drying; appearance and particle size; heavy metals and microbiology; carrier and granulation; pack, lot code and release date. Two quotations that agree on 10,000 FTU/g but differ on pH, substrate or blank are not the same number. The second layer is traceability: who manufactured the lot, which strain and fermentation route were used, which carrier was added, and how the lot was dried and milled. Start with the phytase product page for the catalog specification; the grades page compares activity tiers and physical forms; the analytical methods library describes the assay behind the unit; the quality page sets out the release workflow. ### 02 Phytase grades: activity, granulation and carrier URL: https://nutrition.rainwoodbio.com/products/enzymes/phytase/grades/ Reviewed: 2026-11-20 Phytase is bought by activity, so a grade is a decision about how many FTU one gram carries, how the powder behaves in a mixer, and which carrier it sits on. The catalog form is an 80-mesh powder at ≥10,000 FTU/g; a granulated preparation is quoted as a separate specification. The unit does not change between grades: a preparation carrying several times the activity per gram is the same FTU at a different concentration. In one lineA phytase grade is a concentration and a particle, not a different unit: the FTU stays the same while the grams per tonne and the handling change. ## Why one enzyme arrives in several preparations Fermentation produces a concentrate, not a finished powder. The concentrate is standardised with a carrier to a declared activity, then milled, granulated or coated for the way it will be handled. Each of those steps is a specification decision, and each one changes the certificate rather than the enzyme's chemistry. Three variables define a grade. The first is activity per gram, which fixes how much powder a tonne of feed needs. The second is particle size and granulation, which fix dust, flow and mixing behaviour. The third is the carrier and the coating, which fix what the powder is diluted with and how much heat it survives. A buyer who orders “phytase” without those three has left the grade open. Source is a fourth variable, and it is not a grade. A 3-phytase and a 6-phytase are different enzymes with different EC numbers, different pH profiles and separate regulatory files. A change of source is a change of product, not a change of pack size. ## Powder, granulate and dilution Phytase preparations and what changes between them | Property | Powder (catalog) | Granulated | Diluted preparation | Activity per gram | ≥10,000 FTU/g | Same declared activity, coarser particle | Lower per gram; more carrier | Particle size | ≥95% through 80 mesh | Coarser; size stated on the specification | As declared, usually close to the base powder | Dust | Present; handle with extraction | Lower | Lower per gram of powder, not per unit of activity | Flow and mixing | Free-flowing | Improved flow in a premix line | Bulkier; more mass to weigh and mix | Heat survival | Set by the preparation | A coating, not granulation alone, is what helps | No advantage from dilution | Mass per tonne of feed | Base case | Same, if the activity is the same | Higher, in proportion to the dilution | Specification impact | Base specification | Sieve result and granulation record | Activity and carrier identity The table makes one point plain: granulation and dilution are different changes. Granulation keeps the activity per gram and changes the physical form. Dilution lowers the activity per gram and changes the mass the mill must weigh. Treating the two as one “grade” is how a formulation ends up with the right activity on paper and the wrong amount in the mixer. ## Appearance, solubility and handling The catalog material is an off-white to light tan, free-flowing powder. It dissolves in water to a clear to slightly turbid solution, which is useful for a liquid application but says nothing about activity: a fully dissolved powder can be heat-damaged and a turbid one can be fully active. The 80-mesh line is a finishing specification. It is measured by sieving and it moves when the mill, the sieve or the granulation changes. The powder is hygroscopic enough that an open container in a humid room will pick up moisture, and the resulting loss on drying lowers the activity per gram even when no enzyme has been damaged. Keep the pack closed and the store dry. Dust is a handling property, not a quality defect. It matters for operator exposure, for clean-down and for how evenly the powder disperses into a premix. A granulated grade is chosen for those reasons; it should not be chosen on the assumption that a coarser particle is automatically more stable in a pellet press. ## The arithmetic from FTU/g to grams per tonne At 10,000 FTU/g, one gram carries 10,000 FTU and one kilogram carries ten million FTU. If the formulation target is 500 FTU/kg of feed, each kilogram of feed needs 500 ÷ 10,000 = 0.05 g of powder, which is 50 g per tonne. At 750 FTU/kg the same powder needs 75 g per tonne. A diluted preparation at 5,000 FTU/g would need 100 g per tonne for the same 500 FTU/kg. Those are conversions, not recommendations. The target activity belongs to the nutritionist and the feed formulation, and it should be stated with the unit, the assay pH and the substrate. An overage for pelleting losses is a separate formulation decision; it is not part of the ingredient specification and it does not change the FTU/g on the certificate. The same arithmetic catches a grade error. If a premix is built for a 10,000 FTU/g powder and a 5,000 FTU/g lot arrives, the inclusion rate doubles. Nothing on the activity line warns the operator, because both lots pass their own specification. The purchase order and the formulation must name the same activity per gram. ## Writing the grade into the specification - “Phytase, EC 3.1.3.8 or EC 3.1.3.26, with the production organism named.” - “Activity ≥10,000 FTU/g, measured by the sodium-phytate assay at pH 5.5 and 37 °C, with the method reference.” - “Loss on drying ≤8.0%; appearance off-white to light tan.” - “Particle size ≥95% through 80 mesh; granulation and carrier stated when they differ from the catalog powder.” - “Heavy metals and microbiology as listed; pack, storage condition and end-of-shelf-life activity.” - “Not a substitute for a different EC number without a written change control and a new specification.” The catalog powder is the base grade. A granulated or diluted preparation is a different purchase with its own sieve result or activity figure, and it should not replace the catalog powder without a written change control. Start with the phytase product page for the catalog specification. How each certificate line is reported is on the COA page; why the FTU cannot be set against the xylanase unit is on the level-four comparison; the methods library covers the assay, and the quality page sets out the release file. ### 02.1 Phytase vs xylanase: two feed enzymes, two units URL: https://nutrition.rainwoodbio.com/products/enzymes/phytase/grades/phytase-vs-xylanase/ Reviewed: 2026-11-20 Phytase and xylanase are different enzymes with different substrates, and each is measured by an assay written for its own reaction. Phytase activity is reported in FTU by the sodium-phytate method; xylanase activity is reported in units defined against a xylan substrate. A phytase figure and a xylanase figure cannot be converted, added or set side by side, even though both are printed as units per gram. In one lineFTU and U are two assays, not two strengths: the numbers cannot be converted, added or compared across the two enzymes. ## Two units, two definitions The phytase unit is pinned to a single definition. One FTU is the amount of enzyme that releases one micromole of inorganic phosphate per minute from sodium phytate at pH 5.5 and 37 °C, as set out in EN ISO 30024. The substrate, the pH, the temperature and the phosphate readout are all part of the unit, which is why an FTU/g figure is comparable across suppliers who cite the same method. A xylanase unit is not pinned to one definition in the same way. The common form is the amount of enzyme that releases one micromole of reducing sugar, as xylose equivalents, per minute from a named xylan at a stated pH and temperature. Published feed definitions use oat spelt xylan at pH 5.3 and 50 °C in one case and at pH 4.8 and 50 °C in another, and some define a unit as 0.06 micromole rather than one micromole under their own conditions. The letter “U” therefore identifies a family of assays, not a single scale. The practical consequence is simple. A powder at 10,000 FTU/g and a powder at 100,000 U/g are not “ten times” apart, and neither number can be converted into the other. The only safe comparison is between two figures produced by the same method on the same substrate at the same conditions. ## Two substrates, two jobs Phytase and xylanase against each other | Property | Phytase | Xylanase | EC number | 3.1.3.8 (3-phytase) or 3.1.3.26 (6-phytase) | 3.2.1.8 (endo-1,4-β-xylanase) | Substrate | Phytate, myo-inositol hexakisphosphate | Arabinoxylan, a β-1,4-xylan polymer | Substrate size | A small molecule with six phosphate groups | A polysaccharide chain | What hydrolysis releases | Inorganic phosphate and lower inositol phosphates | Xylose and xylooligosaccharides | Assay readout | Inorganic phosphate by molybdate colour | Reducing sugar by dinitrosalicylic acid or a similar reagent | Unit | FTU, defined at pH 5.5 and 37 °C | U, defined by the xylan, pH and temperature on the certificate The substrates explain why the two enzymes are not interchangeable. Phytate is a mineral-binding molecule, and phytase acts on it to release phosphate and lower the binding capacity of the inositol phosphates. Arabinoxylan is a structural polysaccharide, and xylanase cuts the backbone into shorter chains. One reaction is a dephosphorylation; the other is a depolymerisation. A feed formulation may use both, but it does not choose between them. ## The assays do not share a readout Both methods are colorimetric, which is where the confusion starts. The phytase assay measures inorganic phosphate released from sodium phytate, developed with molybdate and read against a phosphate standard. The xylanase assay measures reducing ends released from xylan, developed with dinitrosalicylic acid or a comparable reagent and read against a xylose standard. A phosphate standard cannot calibrate a reducing-sugar method, and a xylose standard cannot calibrate a phosphate method. Each assay also needs its own blank. The phytase powder can carry phosphate from the fermentation or the carrier, and that phosphate is read as product unless a sample blank is subtracted. A xylanase powder can carry reducing sugars or a carbohydrate carrier that reacts in the same readout. In a blend that contains both enzymes, the two backgrounds have to be separated before either figure means anything, which is one reason a blend is released against two methods rather than one “total activity” number. The conditions matter as much as the chemistry. A phytase figure at pH 5.5 and 37 °C and a xylanase figure at, for example, pH 4.8 and 50 °C describe two different experiments, and neither can be corrected to the other by a factor. ## From activity to grams per tonne The inclusion rate is calculated from the target activity in the feed and the activity of the preparation. The unit cancels only within its own assay. Two worked inclusions, each in its own unit | Enzyme | Target in feed | Preparation activity | Powder per tonne | Phytase | 500 FTU/kg | 10,000 FTU/g | 50 g | Xylanase | 1,000 U/kg | 100,000 U/g | 10 g The 50 g and the 10 g are not a statement that one enzyme is stronger. They are the result of two different targets and two different product activities. Change the phytase preparation to 5,000 FTU/g and the same target needs 100 g per tonne; change the xylanase preparation to 50,000 U/g and its target needs 20 g per tonne. The arithmetic follows the declaration on the certificate. The target itself belongs to the nutritionist and the feed formulation. It should be written with the unit and the method, and it should be supported by the trial or the supplier's efficacy file rather than inferred from another product's inclusion rate. Process losses differ between the two enzymes, so an overage measured for one does not transfer to the other. ## When both enzymes are in the same diet Phytase and xylanase are commonly used together because they act on different fractions of the same feed. A wheat- or barley-based diet can carry both phytate and arabinoxylan, and the two enzymes do not compete for the same bond. Using both is a formulation decision; substituting one for the other is not possible at any inclusion rate. A blend is specified by two activities, two units and two methods. The certificate should report the phytase figure and the xylanase figure separately, each with its own assay conditions, and the specification should carry both activities rather than a single summed number. A “total enzyme activity” figure has no unit and cannot be checked by a laboratory. Stability also has to be handled per enzyme. The two proteins can lose activity at different rates through storage and pelleting, so a blend that passes at release can be out of balance at the end of the shelf life. Ask for stability data on the blend, not only on the two powders separately. ## What to write when buying either or both - “Phytase, EC 3.1.3.8 or 3.1.3.26, source organism named; activity ≥10,000 FTU/g by the sodium-phytate method at pH 5.5 and 37 °C.” - “Xylanase, EC 3.2.1.8, source organism named; activity in U/g with the xylan substrate, pH and temperature written out.” - “In a blend, both activities and both methods reported separately; no summed or converted figure.” - “Loss on drying, carrier, granulation and particle size stated for each component.” - “End-of-shelf-life minimum for each activity; process-loss data for the intended route.” The two product pages carry the catalog specifications: phytase and xylanase. The phytase grades page covers activity tiers and granulation; the COA page shows how the FTU line is reported; the methods library describes the assay conditions; the quality page covers release and change control. ### 03 Phytase stability: heat, moisture and the pack URL: https://nutrition.rainwoodbio.com/products/enzymes/phytase/stability/ Reviewed: 2026-11-20 Phytase is a protein, so its activity falls as heat, moisture and time act on it. A sealed powder at ambient temperature holds its activity for months; an open pouch in a humid room loses it faster; a solution made on site from the powder loses it within days; and pelleting is usually the largest single loss in a feed mill. The shelf-life figure comes from stability data on the exact pack and storage condition, and the release certificate does not supply it. In one lineHeat and moisture are what consume phytase activity; the pack, the process temperature and the time on the shelf decide how much is left. ## The powder: moisture, temperature and time The catalog sets loss on drying at ≤8.0%. That limit is checked at release, and it is also the room the lot has left for moisture pick-up. A pouch opened in a humid room takes water from the air, the loss on drying rises, and the activity per gram of powder falls because the powder is now carrying inert water. The enzyme may be undamaged and the number on the re-assay will still be lower. Temperature acts on the protein itself. Every enzyme has a rate of inactivation that climbs with temperature, so a pallet parked in a hot loading bay or a drum stored beside a heater ages faster than the same lot in a cool store. Ambient warehouse conditions are usually acceptable for a sealed pack; a car boot, a greenhouse or a sun-exposed container is not. The pack, not the certificate, is what keeps moisture out. The 1 kg foil pouch and the lined 25 kg fiber drum both do that while they stay closed. Folding an opened pouch over does not make it heat-sealed again, and the air it traps is humid. For long storage, decant the remainder into a smaller sealed container and write the opening date on it. ## The solution: the shortest shelf life The catalog product is a powder. Liquid phytase preparations exist, and they are formulated for stability with a stabiliser and a preservative, but a solution made in the plant from the powder is a different proposition. Once the enzyme is in water, heat, pH and microbial growth act at the same time, and activity can fall quickly at room temperature. If a liquid addition is needed, make it fresh, keep it cool, control the pH and use it within the validated hold time. Avoid high shear and foaming, which denature protein at the air interface, and keep the tank covered. The assay pH of 5.5 is a measurement condition, not a stability optimum: the formulation's own pH and the time in the tank have to be tested. Post-pellet liquid application is a common way to avoid the heat of the press, and it moves the stability question to the finished feed. The coated pellet still has a moisture and temperature history, and the activity in the feed has to be measured rather than calculated from the tank assay. ## The variables that cost activity Factors that move phytase activity in storage and processing | Factor | What it does | Control | Heat | Denatures the protein; the main loss in pelleting | Cool store; validated conditioning and press conditions | Moisture | Dilutes the powder and accelerates inactivation | Sealed pack; dry store; closed liner | pH | Moves the enzyme away from its active range | Validate the matrix pH; do not assume the assay pH | Proteases and microbes | Digest the enzyme in a wet matrix | Preservative and hygiene control in liquid systems | Metal ions | Can bind or inactivate the protein | Check premix compatibility; avoid direct contact | Shear and foam | Denature protein at the air-liquid interface | Low-shear mixing; avoid over-agitation | Time | Progressive loss at any condition | End-of-shelf-life minimum; retest at the stated interval These factors combine. A warm, humid premix line is worse than either condition alone, and a liquid held in a warm tank combines heat, pH and microbial growth. The useful question is not whether phytase is stable, but how much activity remains in this pack, after this process, at this point in the shelf life. ## Designing the stability study The study design names the pack, the chamber condition, the sampling points and the test panel. The chamber conditions are 25 °C and 60% relative humidity for long-term, 30 °C and 65% for intermediate, and 40 °C and 75% for accelerated. Together they show how the pack behaves in a warehouse and under stress. The report should give the result at each point rather than a single verdict, and name the pack and the lot family. Test activity by the named sodium-phytate method at every point, with loss on drying, appearance and microbiology. The activity figure needs the same blank and standard curve as the release assay, or the trend is noise. If the material will be pelleted, add a process arm: condition and press at defined temperatures and residence times, then assay the pellets, because the press is a harsher test than any incubator. The data to request is the one for the pack you will actually buy. A drum and a pouch differ in headspace, opening history and surface-to-volume ratio, so one pack's result does not describe the other. ## What the finished formula does to the data A premix is not an inert carrier. Trace minerals, choline chloride and acidic ingredients can hold moisture against the enzyme, and a premix with a high mineral load can lose activity faster than the powder alone. Ask for compatibility data, or run a small blend and assay it after the intended storage period. In a compound feed, the mash and the pellet are different products. The mash carries the enzyme through the mixer; the pellet carries it through steam and pressure. Post-pellet application avoids the press but adds a liquid-handling step. Whichever route is used, the activity in the finished feed is the number that matters, and it is measured, not inferred from the inclusion rate. An overage is a formulation decision. It can cover a measured process loss, but it cannot rescue a pack that admits moisture, and it should be supported by the process data rather than a fixed percentage carried from another product. ## Where the shelf-life figure comes from No single shelf-life number is published for phytase: the pack and the storage condition are what determine it. The retest period is written on the specification and backed by the stability file for that pack. A figure quoted without the pack, the storage condition and the test panel is not a shelf life. At the end of the retest period, assay the retained sample again before extending use. An extension needs data, and a bulk figure does not transfer to a repacked container. Standard packs are listed on the product hub. The COA page covers release tests, the MOQ page pack and lead time, the methods library the activity assay, and the quality page the release workflow. ### 04 Phytase: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/enzymes/phytase/moq/ Reviewed: 2026-11-20 The MOQ for phytase is 1 kg in a foil pouch; the bulk pack is a 25 kg fiber drum; the standard lead time is 1–7 days from order confirmation. A firm quotation needs the activity and the assay method, the pack, the destination and Incoterm, the documents and the intended use, because a feed customer and a food customer do not need the same file. In one lineOne kilogram is the minimum because it is the smallest pack that carries a lot code, a retained sample and an assay record. ## Where the 1 kg minimum comes from One kilogram at 10,000 FTU/g carries ten million FTU. At a formulation target of 500 FTU/kg of feed that is enough for 20 tonnes of feed, which covers a bench trial, a mill trial and a retained sample from the same lot. The pack is a traceable commercial unit, not a scoop taken from a drum. Below 1 kg the usual route is a split from a bulk lot, repacked into a smaller container. That adds handling and cuts the link to the original pack, while the enzyme itself is unchanged. The 25 kg drum is the bulk unit: 250 million FTU, less handling per kilogram, but also more inventory and a longer storage period. The minimum is set by the pack and the traceability it carries, not by a volume target. The activity figure matters to the arithmetic. A 1 kg pack of a lower-activity preparation covers fewer tonnes at the same target, so the buyer should convert the pack into FTU before deciding whether it is enough for the trial. ## The packs we ship The three standard packs | Pack | Fill | Where it fits | Handling note | Foil pouch | 1 kg | Trials and small batches | Keep sealed; reseal after opening | Fiber drum | 25 kg | Production runs | Lined; lot code repeated on the liner | Granulated grade | On request | Dust control and flow | Sieve result changes with granulation The catalog form is an 80-mesh powder, ≥95% through 80 mesh. Granulation is a different specification, not a packing choice: it moves the sieve line and may move the lead time. If the dosage form or the premix line needs a coarser, freer-flowing powder, say so before the quotation so the specification and the pack are priced and scheduled together. ## Dispatch, transit and the calendar Quoted dispatch for the catalog pack is 1–7 days from confirmation of the order. Picking, paperwork and dispatch sit inside that window; freight transit, customs and the customer's own release sit outside it. A custom granulation or a non-standard pack takes longer, and the quotation should say so. Get a dispatch date, not only a window. The pouch usually travels as a parcel and the drum as a pallet; the Incoterm decides who books the freight and who clears customs. The COA and the other lot documents should ship with the pack, not arrive after it. Heat is the reason transit deserves attention for this product. A parcel left in a hot vehicle or on a sun-exposed dock can lose activity before it reaches the bench, so the shipping method and the season belong in the order conversation, not only the freight rate. ## Making a quotation comparable A quotation can be compared when it states six things: - The preparation and its source. Phytase, with the EC number and the production organism named. - The unit and the method. The FTU/g figure, the sodium-phytate assay, pH 5.5, 37 °C, and the method reference. - The release specification. Loss on drying, heavy metals, microbiology and particle size. - The pack and the quantity. The 1 kg pouch, the 25 kg drum, or a granulated preparation. - The destination and the trade term. The destination country, the port or delivery address, and the Incoterm. - The intended use and the market. Feed, food processing or another use, and where it will be sold. A quotation that names only “phytase 10,000” is incomplete. The unit needs its method, and the material needs its source and pack. Commercial terms are stated on the quotation; this page describes the pack and the documents that make the offer comparable. ## A sample that can be traced The 1 kg pack is the sample that qualifies a lot. Assay activity, moisture and microbiology before scaling, and retain a sample from that pack. The sample's lot code should agree with the COA and the quotation. Without a lot code, a sample proves nothing about the production lot. Transport can change the sample. A pouch that spent a week in a warm courier network may assay below the certificate, and the difference belongs to the journey rather than to the supplier. Record the condition on arrival and assay promptly. A trial that needs less than a kilogram is drawn from a bulk lot and repacked, so it is not the 1 kg catalog pouch. The split carries its own handling record and should be requested in writing, with the lot code kept beside the trial data. ## Settling the terms Put the commercial and quality terms in one place: Incoterm, pack, dispatch window, specification revision, a COA with every lot, the retained sample, the retest period and a change-control route. The activity guarantee needs a date attached: a figure at release and a figure at the end of the shelf life are different promises. A lot that misses the specification is handled through the retained sample and a joint re-test using the named method; a photograph of the drum is not evidence. The quality agreement should name the referee laboratory, say who pays for it, and fix the method it will use. The catalog specification is on the phytase product page. The COA page lists the release tests, the compliance page the market files, the methods library the assay and the quality page the release and change-control workflow. ### 05 The regulatory file for phytase URL: https://nutrition.rainwoodbio.com/products/enzymes/phytase/compliance/ Reviewed: 2026-11-20 Phytase, CAS 9001-89-2, is an enzyme preparation, and its regulatory route depends on what it goes into: a feed additive, a food enzyme used as a processing aid, and an ingredient of a supplement are three different files. The specification describes the preparation; it does not decide the route. The buyer's regulatory team confirms the route for the destination and the finished product; this page sets out the documents and checks that file needs. In one lineThe specification describes the enzyme preparation; the route depends on whether it goes into feed, food processing or a supplement, and on the market. ## The preparation, not just the protein A phytase product is the enzyme plus a carrier, and often a coating, plus the residues of the fermentation that made it. The regulatory entry, where one exists, is written around that preparation: the production organism, the activity, the carrier and the intended species or food use. “Phytase” as a word does not identify a preparation, and it does not carry an authorisation from one product to another. Two EC numbers appear in the market. A 3-phytase (EC 3.1.3.8) and a 6-phytase (EC 3.1.3.26) hydrolyse different phosphate positions on the phytate ring, come from different production organisms and have separate files. The certificate and the specification should name the EC number and the organism, not only the activity. Change control follows from that. A new strain, a new carrier or a new granulation is a change to the preparation, and the destination file may need to be reopened even when the FTU/g figure is unchanged. ## European Union For feed, the framework is Regulation (EC) No 1831/2003 on additives for use in animal nutrition. Authorisations are granted for a defined preparation, with conditions on target species, minimum or maximum content in complete feed, and labelling; Regulation (EC) No 767/2009 adds the feed-labelling rules. As of this review, a phytase preparation has to be checked against its own authorisation entry, because the conditions are not interchangeable between products. For food, an enzyme used as a processing aid falls under Regulation (EC) No 1332/2008 and the food-enzyme list as it currently stands. A feed authorisation does not carry across to a food use, and the food route may require the specific preparation to be listed. The current consolidated text is the reference; the market can change, so confirm before the first shipment. ## United States For feed, the route runs through the Federal Food, Drug, and Cosmetic Act and the FDA's Center for Veterinary Medicine, with AAFCO ingredient definitions where one exists. Those definitions are written around a specific preparation, so the source organism and the carrier on the certificate are part of the check rather than background detail. For food, an enzyme preparation used as a processing aid may be covered by a GRAS position or by the processing-aid route, and the basis has to extend to the specific preparation and its use level. The supplier states the basis it relies on and supplies the document behind it; the buyer confirms that the basis covers the finished product and the market. ## Contaminant limits and the finished product Contaminants are judged on the finished product, not only on the drum. The catalog limits below are the release gate; the destination text and the daily intake or feed inclusion rate decide whether the finished product complies. Contaminant gates and the finished-product check | Parameter | Catalog limit (as received) | What the file should show | Lead (Pb) | ≤3 mg/kg | Lot result, method and the finished-product calculation | Arsenic (As) | ≤2 mg/kg | Lot result and the destination limit for the feed or food category | Cadmium (Cd) | ≤1 mg/kg | The lot result, plus any exception for that food category | Mercury (Hg) | ≤0.1 mg/kg | Lot result and method | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Count and absence statement for the lot For feed in the EU, Directive 2002/32/EC on undesirable substances sets the limits that apply to feed materials and compound feed, and the finished-feed calculation follows from the inclusion rate. For food, Commission Regulation (EU) 2023/915 sets contaminant limits by food category. Neither text is reproduced here; the buyer applies the current version to the product as sold. ## What can be said No disease-related claim is made for this material, and none should be built on the certificate. In feed, claims and labelling follow the authorisation and the feed-labelling rules; in food and supplements, nutrition and health claims fall under Regulation (EC) No 1924/2006 in the EU and under the corresponding US rules, and a claim needs its own authorisation or substantiation. The activity figure is not an efficacy claim. It says how much enzyme activity the powder carries under the assay conditions, not how much phosphorus an animal absorbs or what a finished feed will deliver. Efficacy belongs to trial data and to the customer's own claim file, and the assay pH of 5.5 is not the pH of the gut. Environmental statements about phosphorus in manure are claims in their own right. They need measured trial support and a check of the destination rules; they are not implied by the activity on the certificate. ## What belongs in the phytase file Start with the COA and the specification. The COA should name the preparation, the EC number and the production organism, and report activity by the sodium-phytate method with its blank and standard, loss on drying, heavy metals and microbiology. Add the TDS, the SDS, the carrier declaration and the origin record for the manufacturing site. The allergen and GMO statements matter for an enzyme. Fermentation media can carry allergens, the carrier may be a starch or a mineral, and the production organism may be genetically modified; each of those is a declaration the customer's file needs. Add the residual-fermentation statement, the method reference and the regulatory status the supplier relies on for the intended use. The phytase product page holds the catalog specification. The COA page explains the lot certificate and the identity page the analytical evidence. The methods library covers the assay conditions, and the quality page sets out the release file. ## Checks before the first order - Specification version, CAS number, EC number and production organism are named. - The intended use is settled: feed additive, food enzyme or another route, in which market. - COA, TDS, SDS, carrier, allergen, GMO, origin and residual-fermentation statements are on file. - Heavy-metal and micro results are converted to the finished-product dose or inclusion rate. - The label and any claim have been reviewed for the destination. - Strain, carrier, granulation and pack are under change control. - Quotation, specification and certificate carry the same version. ### 06 How we prove a phytase lot is the named enzyme URL: https://nutrition.rainwoodbio.com/products/enzymes/phytase/identity/ Reviewed: 2026-11-20 Four independent checks identify a phytase lot. The paperwork must name the preparation, the EC number and the source organism; the sodium-phytate assay must show the enzyme action under defined conditions; the protein figure must give specific activity; and the lot code must tie all three to the pack. The assay alone cannot separate a concentrate from a diluted lot, or one phytase from another. The source and the protein figure are what make the activity meaningful. In one lineIdentity is the source, the assay and the protein figure agreeing, with the lot code tying them to the pack. ## Four questions, four kinds of evidence A certificate can carry the correct name and still not show that the powder matches it. Each layer answers a question the others cannot; answering only the first shows a label, not the powder. Four kinds of identity evidence | Layer | Question | Evidence | What it proves | Document | Is the preparation named? | Name, CAS number, EC number, production organism | Paperwork only | Activity | Does it hydrolyse phytate? | Sodium-phytate assay, pH 5.5, 37 °C, with blank and standard | The enzyme action, not the source | Protein | How much activity per milligram? | Protein assay and specific activity; electrophoretic pattern against a reference | Concentration versus dilution | Traceability | Is this the lot tested? | Lot code on pack, certificate and retained sample | The link from paper to drum ## The ratios: activity per protein and activity across pH The first ratio is specific activity: FTU per milligram of protein. A dilution with carrier lowers the activity per gram and the protein per gram together, so the ratio holds while the powder becomes weaker. A heat-damaged lot keeps much of its protein but loses activity, so the ratio falls. A purified preparation raises the ratio. The activity line alone shows none of those movements. The ratio is comparable only within one method. A colorimetric protein method against a bovine serum albumin standard measures total protein, including the fermentation proteins that are not phytase, so two suppliers can report the same FTU/g with different protein figures. Use the ratio to follow one source across lots, not to rank two sources against each other. The second ratio is activity at two pH values. A 3-phytase from Aspergillus niger is commonly described with activity peaks near pH 2.5 and pH 5.0–5.5, while a bacterial 6-phytase such as the E. coli enzyme is commonly reported with a single broad optimum in the acidic range, near pH 4.5–5.5 depending on the assay. The ratio of activity at pH 2.5 to activity at pH 5.5 is therefore a fingerprint of the source rather than a potency measure. It has to be measured on the actual preparation: the profile belongs to the enzyme and the assay, not to the word “phytase”. ## X-ray diffraction: not an identity test here X-rays see order, and a standardised enzyme powder has almost none: the pattern is a broad hump instead of sharp reflections. That rules out distinguishing one enzyme preparation from another, confirming the production organism or measuring activity. Sharp peaks in a commercial powder usually belong to a crystalline carrier or a mineral contaminant, not to the enzyme. Protein crystallography starts from a single purified crystal, not from a drum of standardised powder. The method does have a use in a carrier check: if the powder is declared on a crystalline carrier, a diffraction pattern can show whether that carrier is present in the expected form. It still says nothing about the enzyme. Identity evidence for phytase comes from the activity assay with its blank and standard curve, the protein figure and an electrophoretic band pattern against a reference lot. The XRD method note describes what the technique can and cannot show. ## How a phytase lot can fall short Ways a phytase lot can be substituted, and the signals | Mode | What it looks like | What catches it | Dilution with carrier | Activity per gram below the declared figure; ash or carrier high | Specific activity; carrier declaration; mass balance | Heat damage | Activity low while moisture and appearance look normal | Specific activity; a pH-profile check; a process history | Another enzyme | A xylanase or a protease sold as phytase; no phytate hydrolysis | The sodium-phytate assay with its blank and standard | Different phytase source | Activity passes; pH profile and EC number differ | pH-activity ratio; EC number and organism statement | Added phosphate | Activity reads high; the powder carries free phosphate | The sample blank; phosphate determination on the extract | Moisture | Activity per gram low; loss on drying high | Loss on drying beside the activity The added-phosphate case is the one that is easy to miss. The assay measures inorganic phosphate, so phosphate already in the powder is read as enzyme product unless the blank removes it. A lot can pass an activity limit on added phosphate and carry very little enzyme. Ask for the blank, the standard curve and, where the result is disputed, a protein figure that shows whether the activity sits on protein at all. ## What the identity specification should say - “Phytase, EC 3.1.3.8 or EC 3.1.3.26, production organism named, CAS 9001-89-2.” - “Activity ≥10,000 FTU/g by the sodium-phytate assay at pH 5.5 and 37 °C, with the method reference and blank correction.” - “Loss on drying ≤8.0%; protein and specific activity reported for the lot.” - “Appearance off-white to light tan; particle size ≥95% through 80 mesh.” - “No phytase activity from a source other than the declared organism; carrier declared.” - “Lot code on the pack, the certificate and the retained sample.” ## Five questions worth asking - Which EC number and production organism are behind this lot, and are they on the certificate? - What is the exact unit definition, and can you provide the standard curve and a sample blank? - What are the protein figure and the specific activity, and which protein method produced them? - Can you provide the pH-activity profile, so the source can be compared with the reference? - If a result is disputed, would you re-test the retained sample jointly at a laboratory we both accept? Those answers, taken together, are an identity file; one activity figure is not. Start with the phytase product page for the catalog specification. Where each figure sits on the certificate is on the COA page; the grades page compares the preparations; the methods library covers the assays; the quality page describes the release and retained-sample workflow. ### 01 What the COA for xylanase actually contains URL: https://nutrition.rainwoodbio.com/products/enzymes/xylanase/coa/ Reviewed: 2026-11-20 The certificate for a xylanase lot reports appearance, identification by the activity assay, activity in U/g, loss on drying, particle size, the heavy-metal panel and microbiology. The activity row describes the enzyme, and it is comparable only when the substrate, assay pH, temperature and unit definition sit beside the number. The limits below are the catalog specification; the batch COA confirms the lot. In one lineA xylanase certificate is only comparable when the U/g figure sits beside the substrate, the assay pH, the temperature and the unit definition that produced it. ## The certificate as a test report A certificate can be audited line by line when every row carries what was measured, the method that produced the number, and the limit the lot was released against. For activity an enzyme needs a fourth element, the assay conditions: the same powder reads differently at another pH or temperature. Identification and activity are one measurement here: the activity assay on a xylan substrate is also the identity test, so the method behind the U/g figure is the evidence. Release specification · xylanase powder | Parameter | Method | Release limit | Appearance | Visual | Off-white to light tan, free-flowing powder | Identification | Xylanase activity assay on a xylan substrate | Conforms to the reference | Xylanase activity | Reducing-sugar assay on xylan; unit definition stated | ≥100,000 U/g | Loss on drying | Gravimetric | ≤8.0% | Particle size | Sieve analysis | ≥95% through 80 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent ## The unit, the substrate and the basis A xylanase unit is a rate, not a mass. The common definition is the amount of enzyme that releases one micromole of xylose equivalents per minute from xylan under the stated conditions, but the detection step may be calibrated against xylose or total reducing sugar, and those are not the same scale. The certificate has to say which one it uses and which substrate grade: birchwood xylan, oat spelt xylan and wheat arabinoxylan are not interchangeable. The activity needs a mass basis too. A figure per gram of powder as received includes the moisture in the powder; a figure per gram of dry solids excludes it. At the 8.0% loss-on-drying limit the difference is about 8.7%, enough to make two certificates that both say 100,000 U/g disagree. State whether the U/g is as-is or corrected to dry matter, and print the loss on drying beside it. The assay conditions belong in the same block: pH, temperature, incubation time, substrate concentration and the standard curve. A xylanase that reads 100,000 U/g at its optimum pH may read a fraction of that at the pH of a feed mash or a dough. That is a number measured elsewhere, not a failing lot. When the process condition is far from the assay window, agree an additional result there. ## Release limit versus batch result The release limit is the acceptance boundary for the lot. The batch result is what the laboratory measured on that lot, and it belongs in its own column with the method and the date. A result column filled with the specification range is not a result; it is a copy of the gate. What the result column should contain | Parameter | Release limit | Result column | Xylanase activity | ≥100,000 U/g by the named method | A measured U/g figure, with basis and method reference | Loss on drying | ≤8.0% | A measured percentage | Particle size | ≥95% through 80 mesh | The measured percentage through the sieve | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot Activity is a one-sided limit, so a lot at 102,000 U/g passes and a lot at 140,000 U/g also passes. The result, not the limit, shows the headroom a process step has to consume. Ask for the activity guaranteed at the end of the declared shelf life as well as the release figure; a powder bought near that date is bought at the lower number. ## What moves between batches The fermentation sets the starting point. Strain, medium, induction and harvest shift the balance of xylanases and side activities in the broth, and recovery and standardisation decide how much of that balance reaches the powder. A supplier holding ≥100,000 U/g is choosing where in the concentrate to land, so the spread between lots is a process decision as much as a biological one. Drying and milling move the activity as well. A wetter powder reads lower per gram, and a milling step that generates heat can destroy activity before the sieve is reached. Particle size is a finishing specification, so the 80 mesh result can move when the mill or the sieve changes. Colour is the least quantitative line and often the most revealing: a darker tan can follow a hotter dry or a longer hold while the activity still passes, so read the batch record before rejecting on colour. The method matters as much as the number: a change of substrate grade, buffer or incubation time makes two U/g results incomparable. A trend across lots is the useful signal — activity drifting down, loss on drying climbing, a side activity appearing. ## When to order an outside test An independent test is worth ordering for a new source, a first regulated shipment, a use where the dossier depends on the activity figure, or a disputed result. The panel: activity on a retained sample by the buyer's own method, protein, loss on drying, heavy metals by ICP-MS, microbiology and a protein pattern by gel electrophoresis. Add the side activities that matter for the use, particularly cellulase and β-glucanase, because a xylanase preparation with a large cellulase activity may be a blend sold under a single name. Ask for the detection limit on each screen; a “not detected” line without a limit describes the method, not the sample. Traceability is part of the test. The laboratory should receive the retained sample, not a fresh scoop, and the report should carry the lot code that appears on the pouch and the drum. If a result is disputed, the referee needs the supplier's certificate and the agreed specification as well as the sample; the question is which test separates a weak lot, a heated lot and a different enzyme. ## What to compare between suppliers Put six lines side by side: unit definition and method; activity result and basis; production organism and strain; carrier; loss on drying and particle size; side-activity profile. Two quotations that agree on U/g but differ on the other five are not describing the same preparation, and the gap surfaces at the first process trial. The second layer is traceability. The certificate should name who manufactured the lot, which organism and process were used, and which carrier was added at standardisation; the lot code should match the pouch, drum and retained sample. The catalog sits on the xylanase product page; the dilution tests are on the identity page; the method vocabulary is in the methods library; the release workflow is on the quality page. ### 02 Xylanase grades: activity, form and the production organism URL: https://nutrition.rainwoodbio.com/products/enzymes/xylanase/grades/ Reviewed: 2026-11-20 Xylanase is sold by declared activity, physical form and production source, not by a purity percentage. The catalog grade is an 80 mesh powder at ≥100,000 U/g; granulation is a separate form on request, and a lower-activity dilution or a blend is a different specification. The choice is decided by the dose weight the formula can weigh, the dust the plant can control and the substrate the process contains. In one lineThe grade is fixed by the activity per gram, the physical form and the production organism, not by the word xylanase alone. ## Why an enzyme has grades but no purity A mineral salt can carry a purity figure because the assay weighs the molecule against the rest of the drum. An enzyme preparation resists that description: the powder is enzyme plus fermentation residue plus carrier, and the activity is a rate rather than a proportion. The useful description is a declared activity, the carrier and the particle form. That is why two suppliers can both offer “xylanase” and mean different materials: one sells a concentrate at ≥100,000 U/g, the other a diluted powder at a fraction of that figure, and the second carries several times the mass for the same units. They are different grades with different jobs, and each certificate has to be read the same way. What a grade fixes in a formula | Property | What it controls | Where it shows up | Activity (U/g) | How many units a gram delivers | Dose weight, label basis, overage | Source organism | Which enzyme and which regulatory file | Identity, stability, permitted use | Carrier | What the activity is diluted on | Ingredient list, moisture, flow | Particle size and form | How the powder flows, disperses and dusts | Blend uniformity, mixing time | Side activities | What else the preparation does | Substrate fit, assay interference | Intended use | Feed or food process | Document pack and label rules ## The grade options side by side The catalog form is a ≥100,000 U/g powder at 80 mesh. A granulated form is available on request; where a lower-activity dilution is agreed, it is a separate specification, and a blend with another enzyme is a different product. Xylanase grade options and what changes when you switch | Option | Activity | Physical form | What changes in the formula | Standard powder | ≥100,000 U/g | 80 mesh powder | Smallest dose weight; concentrate for blends | Granulated (on request) | Agreed in the specification | Granules | Less dust; slower dispersion; check granulation loss | Lower-activity dilution (separate specification) | Agreed in the specification | Powder | Larger dose weight; carrier becomes an ingredient | Enzyme blend (different product) | Each activity declared | Powder or granule | Two or more activities; the assay and label both change The activity figure is only comparable when the unit is. A U/g from one supplier and a unit named by another supplier are not the same measurement unless the substrate, pH, temperature and detection step match. The COA page sets out what belongs beside the number. ## Powder, mesh and dust The catalog particle size is ≥95% through 80 mesh, a fine free-flowing powder that blends well into a dry mix and dissolves in water to a clear to slightly turbid solution. The fines that make it disperse quickly also make it dust. Enzyme powders are respiratory sensitisers, so dust is a handling and documentation question: the safety data sheet lists the hazard statements, and the practical controls are extraction at the source, closed transfer and a suitable mask. Granulation trades dust control against dispersion speed: a granule wets more slowly, so a drink mix or feed premix that must disperse fast is usually built on powder, while a plant handling kilos a day may prefer granules to keep the air clean. The granulation step itself removes activity, and the after-step figure belongs in the specification. The carrier matters as well. A dilution is not inert: it adds mass, may hold moisture and must be declared if it has a function in the finished product. Ask what the carrier is and at what ratio. ## The arithmetic that decides the grade Units are weight multiplied by activity. A formula that needs 2,000,000 U takes 20 g of a 100,000 U/g powder or 100 g of a 20,000 U/g dilution. The units are identical; the mass and the label entry are not. Moving to a five-fold dilution multiplies the powder weight by five and puts four parts of carrier into the blend for every one part of enzyme powder. Weighability usually settles it. A 20 g charge is routine in production and awkward in a small pilot, where the balance and the mixer struggle with a speck of powder. A dilution makes the same units weighable, while carrying the carrier through the formula and into the ingredient declaration. Two cautions sit beside the arithmetic. The label basis has to say whether activity is guaranteed at release or at the end of shelf life. A diluted grade needs a certificate for the diluted lot, not the concentrate it came from. Activity at the end of shelf life is the figure to build the process on, because heat and moisture remove units between release and use. ## How to write the grade into a specification A specification that cannot be tested is not a specification. These lines make this one testable: - “Xylanase (endo-1,4-β-xylanase, EC 3.2.1.8), CAS 9025-57-4.” - “Activity ≥100,000 U/g, with the unit definition, substrate, pH, temperature and incubation time stated.” - “Activity basis: as received or dry solids; release or end of shelf life.” - “Production organism and strain; carrier identity.” - “Loss on drying ≤8.0%; particle size ≥95% through 80 mesh; form powder or granule.” - “Heavy metals and microbiology as listed; side activities declared.” - “Intended use: feed or food process; destination market confirmed.” Write the activity as a one-sided limit (“not less than”) and keep the unit definition in a method appendix under change control. A change of substrate or assay conditions makes two results incomparable even when both say U/g. The catalog values are on the xylanase product page; the checks that keep a diluted lot honest are on the identity page. ## When a different grade is the wrong choice Three situations argue against diluting. A blend already close to its carrier limit gains nothing from more carrier. A formula with a tight moisture budget gains nothing from a carrier that holds water. And a label that needs a compact ingredient list gains nothing from an entry that exists only to make the powder weighable. Granulation has its own limits: a granule that disperses too slowly can fail a drink mix or a fast feed line, and the granulation loss has to be measured rather than assumed. A blend is wrong when the label names a single enzyme, when the assay is specific to xylanase, or when the second activity is not wanted. The xylanase versus cellulase comparison covers the unit question; the cellulase product page compares a different enzyme; the methods library and the quality page carry the assay and release references. ### 02.1 Xylanase vs cellulase: two substrates, two unit definitions URL: https://nutrition.rainwoodbio.com/products/enzymes/xylanase/grades/xylanase-vs-cellulase/ Reviewed: 2026-11-20 Xylanase hydrolyses β-1,4-xylosidic bonds in xylan; cellulase hydrolyses β-1,4-glucosidic bonds in cellulose. They are different enzymes with different EC numbers, substrates, products and assay units, so a xylanase U/g and a cellulase CU/g are not the same measurement and cannot be converted. The choice is made by the substrate in the process, and the specification has to name the unit definition on both sides. In one lineXylanase and cellulase are different enzymes with different substrates, products and unit definitions, so their U/g figures cannot be compared or converted. ## Two substrates, two bonds Xylan is a hemicellulose: a backbone of β-1,4-linked xylose units, often branched with arabinose and glucuronic acid. Cellulose is a homopolymer of β-1,4-linked glucose and is the structural fibre of the plant cell wall. The two sit next to each other in a cereal kernel, so a process can need both enzymes, but the polymers and the enzymes that cut them are not interchangeable. Xylanase and cellulase side by side | Property | Xylanase | Cellulase | EC number | 3.2.1.8 | 3.2.1.4 (endo-1,4-β-glucanase) | CAS number | 9025-57-4 | 9012-54-8 | Bond cut | β-1,4-xylosidic | β-1,4-glucosidic | Main substrate | Xylan, including cereal arabinoxylan | Cellulose | Monomer released | Xylose, with xylooligosaccharides | Glucose, with cellooligosaccharides | Assay substrate | Birchwood, oat spelt or wheat xylan | Carboxymethyl cellulose or filter paper | Activity unit in trade | U/g on a xylan substrate | CU/g, EGU/g or FPU/g | Typical process target | Arabinoxylan in cereals | Cellulose in plant fibre The cellulase name covers a complex: a fungal preparation can contain endoglucanase, cellobiohydrolase and β-glucosidase working in sequence, while a xylanase preparation is built around xylanase activity and may carry debranching side activities. That difference in composition is one reason the two are specified with different methods. ## Two units, no conversion factor An activity unit is a rate defined by an assay. A xylanase unit is usually the amount of enzyme that releases one micromole of xylose equivalents per minute from xylan under the stated conditions. A cellulase CU is a reducing-sugar or fluidity unit defined on carboxymethyl cellulose, and FPU is defined on filter paper. The units answer different questions, so no arithmetic converts one to the other. Activity units in trade and what each one counts | Unit | Used for | Substrate | What it counts | U (xylanase) | Xylanase | Xylan | Xylose equivalents released per minute | CU | Cellulase | Carboxymethyl cellulose | Reducing sugar released, or a fluidity change | EGU | Cellulase endo activity | Carboxymethyl cellulose | Endo-glucanase action, often by viscosity | FPU | Cellulase complex | Filter paper | Total saccharification of a solid substrate | IU or U, undefined | Either | Must be stated | One micromole per minute under the stated assay What does transfer is the total number of units within one system. One kilogram of a 100,000 U/g xylanase carries 100 million U; two kilograms of a 50,000 U/g dilution carry the same 100 million U. That arithmetic is exact and useful for ordering and blending, but it says nothing about how those units relate to a cellulase CU. ## The assay conditions decide the number Both assays need pH, temperature, incubation time, substrate concentration and a standard curve, and both are sensitive to each. Xylanases are commonly assayed in the acidic to neutral range, and cellulases around pH 4.5–5.0 at 50 °C, but the exact settings belong to the source organism and the house method. A figure measured at the optimum does not predict the rate in a feed mash, a dough or a juice at another pH. The detection step adds a second difference. A xylanase assay usually calibrates against xylose; a cellulase assay calibrates against glucose or cellobiose. The same colour intensity therefore maps to a different amount of product, and the standard has to be named with the unit. Viscosity methods add a third scale, because they observe flow rather than reducing ends. Cross-reading is a real risk: a cellulase preparation can show xylanase side activity, and a xylanase preparation can show cellulase side activity. That does not make the assays interchangeable; it means the side activity has to be measured and declared. The identity page explains how the profile is used as evidence. ## What the side-activity profile tells you The two activities are not placed on one scale. Each result is read against its own limit on the specification: the xylanase figure against the xylanase release limit, the cellulase figure against the side-activity limit agreed for that preparation. The pair of verdicts, not a quotient, is what identifies the product. Reading the xylanase and cellulase side-activity profile | Profile against the agreed limits | What it suggests | What to ask | Xylanase above its limit; cellulase at or below its side-activity limit | A xylanase preparation | Which side activities are declared? | Cellulase above its limit; xylanase at or below its side-activity limit | A cellulase preparation | Is xylanase a declared side activity? | Both above their own limits | A blend or a broad carbohydrase | Which activities are on the label and the COA? The profile is not a purity grade. Some side activity is normal in a fermentation preparation, and a cellulase result below its agreed limit may be unavoidable. The signal is a move against the reference lot or a profile that does not fit the product name. Ask for the side activities on the certificate, each with its own method, not only in a marketing description. ## When to choose which Choose xylanase when the target is xylan, particularly the arabinoxylan of wheat, rye, barley or oat. That is the logic in cereal-based feed, in baking and in processes that convert xylan into xylooligosaccharides. Choose cellulase when the target is cellulose: plant-fibre hydrolysis, clarification of a cellulose-containing mash, or a process where the cellulosic fraction is the barrier. Choose both only when the substrate mix contains both polymers and the blend is designed and assayed as a blend. Each activity then needs its own unit, method and line on the specification; a combined “total carbohydrase” figure without a definition is not a specification. The two also have different stability and process windows, so the blend's activity has to be measured after the process step, not inferred from two certificates. The xylanase product page carries the xylanase catalog specification; the cellulase product page carries the cellulase one; the xylanase grades page covers form and activity tier; the methods library explains the assay vocabulary; the quality page describes the release workflow. ## What the specification and label must say Name the enzyme, the EC number, the production organism and the activity unit. For xylanase, write “U/g on a xylan substrate” and add the method reference; for cellulase, write “CU/g on carboxymethyl cellulose” or the unit the method defines. State whether the activity is per gram as received or per gram of dry solids, and whether it is guaranteed at release or at the end of shelf life. On a feed label, name the species and the inclusion basis the authorisation covers. On a food label, name the enzyme when it has a function in the finished food, and follow the processing-aid route when it does not. Neither label should merge the two activities into one number: a xylanase U/g and a cellulase CU/g may look similar, but they are different measurements. ### 03 Xylanase stability: heat, moisture and the activity that remains URL: https://nutrition.rainwoodbio.com/products/enzymes/xylanase/stability/ Reviewed: 2026-11-20 Xylanase activity falls when the powder is exposed to heat or moisture, and the loss is invisible: the powder can look and weigh the same. The dry powder in a sealed pack is the stable format; an aqueous solution is the least stable. Shelf life is assigned from stability data for the exact pack and storage condition, not from the certificate. In one lineHeat and moisture remove xylanase activity even when the powder still looks and weighs the same, so the pack and the storage condition set the shelf life. ## The powder: moisture, temperature and colour Loss on drying is capped at 8.0% at release. That cap is not a storage allowance: an opened pouch takes up moisture, the powder can cake, and the activity per gram falls as the water content rises. A tight seal and a dry store are part of the specification in practice even when the certificate does not say so. Temperature is the second driver. Many xylanases lose activity quickly above about 60 °C, although the exact window depends on the production organism, and thermostable variants exist. The storage condition should be stated as a range, not as a single ambient figure, and the pack should be allowed to equilibrate before opening after cold storage so that condensation does not form on the powder. Colour and flow are the visible signals. A darker tan or a caked powder can follow a hot hold or a moisture excursion while a single activity result still passes; a trend across retained samples says more than one result near the limit. The lot code on the pouch, the drum and the certificate should match. ## The solution: the least stable format Xylanase dissolves in water, and in solution the enzyme is exposed to microbial growth, pH drift, proteases from the fermentation and, in a process line, heat and shear at the same time. Activity can fall within days at ambient temperature, and a clear bottle on a bench is the wrong container for a hold. If a liquid is unavoidable, control the pH and the microbial load, keep the hold cold and short, and validate the hold time before filling. A bulk-powder stability result does not transfer to a beverage, a feed mash or a syrup. The matrix, the process and the pack each change the rate, and the liquid's shelf life has to be measured in the liquid. The process heat load is often larger than the storage heat load. Feed conditioning and pelleting, juice pasteurisation and baking all expose the enzyme to temperatures far above the storage range for a short time. A powder that is stable in a cool warehouse can lose much of its activity in a short, hot process step. ## What drives the loss Factors that move xylanase activity during storage and processing | Factor | What it does | Control | Heat | Unfolds the protein; activity falls faster as temperature rises | Cool store; apply after the heat step where possible | Moisture | Raises water activity; caking, aggregation and microbial growth | Sealed pouch; dry store; desiccant where needed | pH | Moves the enzyme away from its active window | Validate the matrix pH; buffer the liquid | Proteases | Digest the xylanase in a fermentation broth or a blend | Check side activities; separate addition points | Microbial load | Competes for substrate and produces acid or protease | Micro specification; preservative in liquids | Shear and foam | Denatures at an air-liquid interface | Low-shear transfer; avoid over-mixing These factors are not independent. A warm, humid store is worse than the sum of the two effects, and a warm solution at the wrong pH combines all of them. The useful stability question is not “is xylanase stable?” but “stable in which pack, at which condition, for how long, and after which process step?” ## A stability protocol for the ingredient The protocol names the pack, the condition, the time points and the panel. Warehouse behaviour is covered by 25 °C/60% relative humidity and 30 °C/65% relative humidity; 40 °C/75% relative humidity adds a stress arm for the pack. A process arm at the real feed or food heat load belongs in the design when that step is known. Test activity, loss on drying, appearance and microbiology at each point, and run the activity by the same method that will be used at release. An activity result has its own repeatability; a change smaller than the method's variation is not a trend. Report the individual values, not a single pass statement, and identify the pack and the lot family. Request the stability summary for the exact pack you will buy. A 25 kg fiber drum and a 1 kg foil pouch have different headspace and different opening histories, and a repacked container has neither. The methods library describes the assay vocabulary; the COA page shows how the release activity is reported. ## The finished formula changes the answer A dry blend starts with low water activity, but the carrier and the other ingredients can still move moisture into the enzyme, so loss on drying and activity are checked after storage as well as at release. A feed mash is wet and warm; a pelleted feed passes through conditioning and a die. A baked good passes through a hot oven, and a juice or a syrup may be pasteurised. Each of those steps is a stability test in its own right. The formulator decides whether an overage is needed; that is a label and stability decision. An overage does not repair a pack that lets moisture in, and it does not replace a process trial. Where the process heat is unavoidable, the practical options are a more thermostable preparation, a lower temperature, a shorter hold or addition after the heat step. Each option changes the specification, so it belongs in the development conversation, not in a purchase order footnote. ## How the shelf life is set We do not publish a single shelf-life number for xylanase, because the pack and the storage condition set it. The assigned retest period belongs on the specification and is supported by the stability file for that pack. The label should state the activity guaranteed at the end of that period, since the release figure is not the figure the process will receive after storage. At the end of the retest period, re-assay the retained sample before extending use. Do not extend on assumption, and do not apply a bulk-pack figure to a repacked container. The product hub lists the standard packs; the MOQ page covers pack and lead time; the quality page describes the release workflow. ### 04 Xylanase MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/enzymes/xylanase/moq/ Reviewed: 2026-11-20 Xylanase starts at 1 kg in a foil pouch, with a 25 kg fiber drum as the bulk pack; standard orders dispatch in 1–7 days. A firm quotation needs the activity and its unit definition, the pack and quantity, the destination and Incoterm, the documents, and the intended use. In one lineThe 1 kg pouch is the qualification unit: it is the smallest pack that carries its own lot code, activity result and retained sample. ## Why the minimum is 1 kg A 1 kg pack covers a bench trial, a pilot batch and a retained sample, and leaves enough material for an independent activity assay plus a repeat if the first result is disputed. It also travels by air without a pallet, which helps when a formulator needs material before the production plan is fixed. Each pack is a lot-coded commercial unit, not a scoop from a bulk drum. Orders below 1 kg are split from a larger lot and repacked. The split adds handling and a new pack identity, so traceability becomes harder even though the enzyme is unchanged. The 25 kg drum reduces handling per kilogram, but it commits inventory and a longer storage period at the customer. Because activity falls with heat and time, buying more than the retest period can absorb is a quality decision, not only a commercial one. The MOQ is a pack decision, not a volume incentive. A buyer who needs 200 g for a feasibility study is asking for a repack, and the honest answer is to call it one, with its own lot code and handling record. ## Packs and formats Standard xylanase packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal after opening; keep cool and dry | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner; keep the liner closed The catalog form is an 80 mesh powder: ≥95% through 80 mesh. Granulation is a different specification, not a packing choice, and it should be quoted separately because the granulation step changes the activity and the dispersion behaviour. Where a lower-activity dilution is agreed, it is a new specification with its own certificate, not a larger bag of the concentrate. ## Lead time and dispatch Standard orders dispatch within 1–7 days of confirmation. The window covers picking, documents and handover to the carrier, not the transit, the customs clearance or the customer's quality release. A granulated form or a non-standard pack adds time, and the quotation should state it separately. Ask for the dispatch date rather than the range. The pouch usually travels as a parcel and the drum as a pallet, and the Incoterm fixes who books the freight and who clears entry. The COA and the lot documents should travel with the pack, not follow it. The powder does not need a cold chain, but it should not sit in a hot container or a sunny loading bay, because heat exposure in transit is activity loss that no certificate records. ## What a quotation needs Six items make a quotation firm enough to compare: - Product and source. Xylanase, EC 3.2.1.8, CAS 9025-57-4, with the production organism named. - Specification. Activity in U/g with the unit definition, substrate, pH and temperature; loss on drying; particle size; heavy metals and microbiology. - Quantity and pack. Foil pouch or fiber drum, with granulation as a separate line. - Destination and Incoterm. The delivery point and the trade term. - Documents. COA, TDS, SDS, allergen and GMO statements, origin, and any market-specific statement the importer needs. - Intended use. Feed or food process, the species or process step, and the market where the finished product will be sold. A quotation that omits the unit definition or the intended use cannot be compared. The same powder can fit one destination and sit outside the file for another, so the paperwork is part of the offer. Commercial terms are not published here; they are stated on the quotation. ## The sample is a lot, not a demonstration The 1 kg pack is what a buyer qualifies. Run activity by the goods-in method, then loss on drying, the relevant side activities, heavy metals and microbiology. Retain a portion from that same pack. The lot code must match on the sample, the COA and the quotation; without that link the sample proves nothing. A bench trial below a kilogram is a repack, not the catalog pouch. The split comes out of a bulk lot, gets a separate handling record and is not the 1 kg foil pack. Get the split in writing and keep its lot code with the trial data; the bench powder and the production drum can come from different lots even when both meet the same specification. ## Terms to settle before the first order Put the commercial and quality terms on one page: Incoterm, pack, dispatch window, specification revision, lot COA, retained sample, retest period and the change route. Settle them in a quality agreement before the first production order; the same conversation is harder after a dispute. For an enzyme, three change-control items deserve their own lines: a change of production organism or strain, a change of carrier, and a change of assay method. Any of the three can change the activity figure or the regulatory file without changing the product name. The agreement should say who is notified, how far ahead, and which lots are affected. If a lot misses the agreed specification, the retained sample and a joint re-test by the named method are the evidence; a photograph of the drum is not. Name the referee laboratory in the agreement before an order is placed. The product hub carries the catalog specification; the COA page lists the release tests; the compliance page covers the documents; the methods library and the quality page carry the assay and release references. ### 05 The regulatory file for xylanase URL: https://nutrition.rainwoodbio.com/products/enzymes/xylanase/compliance/ Reviewed: 2026-11-20 Xylanase is regulated as an enzyme preparation, not as a mineral or a vitamin, and the route depends on whether it is used in food processing or in feed. The specification and the lot COA describe the material; the regulatory file shows that the preparation, its source organism, its carrier and its intended use are covered for the destination. The buyer's regulatory team confirms that route; this page lists the documents and checks that belong in the file. In one lineA xylanase preparation is regulated as an enzyme, not as a mineral, so the source organism, the carrier and the intended use decide which file applies. ## What the file contains The file has to hold four things at once: the specification version for the xylanase preparation, the certificate that releases the lot, the permitted use and label rules for the destination, and the record of how source, process, carrier and pack changes are handled. The certificate describes one lot, the technical data sheet describes the catalog specification, and the safety data sheet describes handling. The destination route sits alongside those documents, recorded separately. An enzyme file is more dependent on the production organism than a small-molecule file is. The name “xylanase” does not identify a preparation: the same activity can come from a fungus or a bacterium, with a different pH and temperature window and a different regulatory history. The source strain and the carrier are therefore part of the identity, not background detail. ## European Union For food use, the framework is Regulation (EC) No 1332/2008 on food enzymes, and the preparation has to be covered by the Union list for the specific use. The entry is tied to the enzyme, the source and the specification, so a preparation from a different organism is not automatically covered by a broadly named entry. General food law, labelling and contaminant limits sit alongside that route; the current consolidated text is the reference. For feed use, the framework is Regulation (EC) No 1831/2003 on feed additives. An authorised xylanase preparation is listed by function, species and conditions of use, and the file must show that the authorisation covers the preparation, the target species and the inclusion level. A food-enzyme authorisation does not carry across to feed, and the reverse is also true. Great Britain and Northern Ireland do not share one file. Northern Ireland follows the EU framework; Great Britain uses its own registers and labelling. The delivery address decides which applies, and the buyer's team records that decision with the order. ## United States For food use, the question is the basis on which the enzyme preparation is permitted: a GRAS conclusion for the specified use, or an approved food-additive use. The supplier names the basis and the document behind it; the buyer checks that it extends to the finished food and the process step. A statement that a preparation is “GRAS” without the use and the source named is not a basis the buyer can file. For feed use, the preparation has to fit an AAFCO ingredient definition or another permitted basis, and the label has to carry the species and the activity. The regulatory route is recorded separately from the food route even when the same powder is sold into both. ## The feed route has its own questions Feed is a major use for xylanase, and the feed file asks questions a food file does not. The target species and the inclusion level have to be stated, because an authorisation is specific to both. The activity has to survive the feed process: conditioning and pelleting expose the enzyme to heat and moisture, so the file should show whether the preparation is added before or after the pellet mill and what activity remains in the finished feed. The feed label carries the additive name, the activity unit and the species, and the premixture and finished-feed labels each have their own requirements. The buyer's nutritionist sets the inclusion rate; the supplier's job is to state the activity, the stability and the documentation, not to recommend a dose for a species. ## Contaminants and limits The contaminant panel is a finished-product calculation, not only a drum result. The table below is the catalog release panel; the destination text and the daily intake or feed inclusion decide the final limit. Catalog contaminant panel for xylanase powder | Parameter | Catalog limit | What the file should show | Lead (Pb) | ≤3 mg/kg | Lot result, method and the finished-product calculation | Arsenic (As) | ≤2 mg/kg | Lot result and method | Cadmium (Cd) | ≤1 mg/kg | Lot result and any category exception | Mercury (Hg) | ≤0.1 mg/kg | Lot result and method | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | The count and the absence statement for the lot For a feed additive, the dossier may also ask for mycotoxin and antibiotic-activity screens on the fermentation product. Those are not catalog release lines, but they belong in the regulatory file when the destination requires them. Ask for the method and the detection limit on every screen, not only the word “absent”. ## Claims and label language Xylanase is a processing enzyme. Its activity is a functional property in the process, not a nutrient content claim, and the label should not present it as though it had a daily value. In food, the ingredient declaration names the enzyme when it has a function in the finished food; a processing aid that has no function in the finished food follows a different labelling route. In feed, the additive and its activity belong on the label in the form the market requires. No disease-related claim is open for this material, and this site makes no health claim. “Non-GMO” and “GRAS” are statements with a basis behind them; neither should appear on a page or a label unless the source, the process and the use support it. Structure/function language, where a market allows it, is reviewed separately from the specification and the certificate. ## Documents for the file The buyer's file needs the COA with the activity, unit definition, substrate and assay conditions; loss on drying; particle size; heavy metals and microbiology; the specification version; the TDS and SDS; the production organism and strain statement; the carrier statement; allergen and GMO statements; the origin record; the food-enzyme or feed-additive compliance statement for the destination; and the stability summary for the pack. The xylanase product page carries the catalog specification; the COA page explains the lot certificate; the MOQ page covers the pack and documents that travel with it. ## Checklist before the first order - The exact preparation, source organism and EC number are named, not only “xylanase”. - The intended use — food process or feed — and the destination market are written down. - The food-enzyme or feed-additive basis covers the preparation, the use and the species. - The specification states the activity unit, substrate, pH, temperature and basis. - The COA, TDS, SDS, allergen, GMO, origin and carrier statements are on file. - The contaminant results are converted to the finished-product dose or inclusion. - Source, carrier, assay and pack are under change control, and the label is reviewed. The methods library describes the assay vocabulary, and the quality page describes the release file behind the certificate. ### 06 How we prove a xylanase lot is the named enzyme URL: https://nutrition.rainwoodbio.com/products/enzymes/xylanase/identity/ Reviewed: 2026-11-20 A xylanase lot is the named enzyme when the document names the source and the EC number, the activity assay on a xylan substrate gives the declared rate, the side-activity profile fits the preparation, and the lot code ties the powder to the certificate. A single U/g figure cannot separate a xylanase from a cellulase blend, a dilution or a heat-inactivated lot. The layers below are separate questions, and each one needs its own evidence. In one lineIdentity is the production organism, the xylanase activity on a xylan substrate and the protein behind it, tied to one lot code. ## The five identity layers A certificate can name the right enzyme and still fail to prove it. The layers below move from paperwork to measurement to traceability, and a supplier who answers only the first has described the label, not the powder. Five layers of xylanase identity | Layer | Question | Test | What it proves | Document | Are the enzyme and source named? | Name, EC 3.2.1.8, CAS 9025-57-4, strain | Paperwork only | Activity | Does it cut xylan? | Reducing-sugar assay on a xylan substrate | Xylanase action | Protein | Is the rate carried by protein? | Protein, specific activity, gel pattern | Not a spiked reducing sugar | Specificity | What else does it do? | Cellulase, β-glucanase and protease assays | A blend or a side activity | Lot | Do the papers match the pack? | Lot code on COA, pack and retained sample | Traceability ## The ratios that carry the evidence The first useful ratio is specific activity: units per milligram of protein. A dilution lowers both the activity per gram and the protein per gram, so the ratio stays roughly constant while the powder's strength falls. A high activity with a low protein figure points to a purified preparation; a normal activity with a high protein figure points to inactive protein, fermentation solids or a different recovery cut. The ratio is comparable only within one assay and one protein method, but it is a strong consistency check across lots. The second check is the side-activity profile, especially cellulase. A preparation sold as xylanase may carry some cellulase activity, and a small side activity is not automatically a fault. If the cellulase assay returns a substantial result on its own method, or if it moves against the reference lot, the powder may be a blend or a different preparation. Each side activity belongs on the specification with its own method; none of them is converted into xylanase units or added to the xylanase figure. Neither ratio is a purity percentage. They are evidence that the activity and the protein move together and that the preparation still looks like the reference material. The COA page shows where the activity and protein belong on the certificate; the xylanase versus cellulase comparison explains why the two activities are measured on different substrates. ## X-ray diffraction and the solid state An enzyme powder is amorphous, so its diffractogram is a broad halo rather than a set of sharp reflections. XRD therefore cannot name xylanase, identify the source organism or measure activity. Any sharp reflections in a commercial powder are more likely to come from a crystalline carrier or an inorganic contaminant than from the enzyme; protein crystallography needs a single purified crystal, not a standardised drum. That does not make XRD useless. It answers a narrower question: does the solid phase match the specification, and is a crystalline carrier or an inorganic filler present? If a lot is disputed on the carrier or on a mineral contaminant, XRD can support the case. For identity, the evidence comes from the activity assay with its blank and standard curve, the protein figure and the gel pattern against a reference lot. ## What adulteration looks like Common xylanase substitutions and the signals | Mode | What it looks like | What catches it | Dilution with carrier | Normal powder, lower U/g than the label | Activity and protein both low; specific activity steady | Reducing sugar added | Assay reads high, protein normal | Blank, sugar screen, specific activity | Other enzyme substituted | U/g plausible, process behaviour differs | Side-activity profile, gel pattern | Heat-inactivated blend | Correct appearance, low activity | Activity against a reference lot; protein normal | Undeclared carrier change | Specification sheet unchanged | Carrier identity, change-control notice | Mislabelled lot | Certificate belongs to another drum | Lot code on pack, certificate and sample The first two modes pull in opposite directions: a dilution lowers the activity, while added reducing sugar raises the assay reading. Measure both activity and protein on one sample and the pair separates the two cases. A powder at 100,000 U/g with 2% protein and one at the same activity with 10% protein are different materials, even though the activity line looks identical. ## Writing identity into the specification A testable identity section carries the name, EC number and CAS number; the production organism and strain; the activity with its unit definition, substrate, pH, temperature, incubation time and basis; the protein or specific-activity range where agreed; the side activities that matter for the use; loss on drying and particle size; and the lot-code rule. Add the carrier identity and the intended use, because both affect the regulatory file. Two habits make the difference. State the identity test applied to each new lot — the strain statement, the side-activity profile, the gel pattern against a reference lot, or a combination — so identity is routine rather than a reaction to an odd result. And write the unit definition in a method appendix under change control, because a change of substrate or conditions makes two U/g results incomparable. ## Five questions for the supplier - Which organism and strain produced this lot, and is it the same source as the reference lot? - What is the exact unit definition: substrate, pH, temperature, incubation time and standard? - What are the activity and protein figures for this lot, and what is the specific activity? - What are the cellulase and β-glucanase side activities, and which test shows this is not a blend? - Which lot code ties the certificate to the pack and the retained sample? Five direct answers amount to an identity file; a single activity percentage does not. The product hub carries the catalog specification; the grades page compares the forms; the cellulase product page is the comparison product; the methods library explains the assay vocabulary; the quality page describes the release file. ### 01 What the COA for calcium citrate anhydrous contains URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-citrate-anhydrous/coa/ Reviewed: 2026-11-20 The release certificate for calcium citrate anhydrous has to answer two questions that a calcium result alone cannot: is the anion citrate, and is the powder free of the tetrahydrate's water? The catalog sets calcium at 21.0–24.0% by complexometric titration, loss on drying at ≤1.0%, calcium and citrate identification, 80 mesh, the heavy-metal panel and microbiology. The batch COA reports those lines for one lot; the limits below are the specification, not a result. In one lineThe calcium window and the water limit have to be read together: 21.0–24.0% calcium is consistent with the anhydrous salt, and a loss on drying at or below 1.0% is what keeps the tetrahydrate out. ## The certificate as a test report Read the certificate as a chain of evidence. The identity block comes first: the calcium reaction, the citrate reaction and the infrared spectrum. The quantitative block follows: calcium by titration and loss on drying. The safety block closes it: heavy metals, microbiology and mesh. A certificate that prints only the middle is a potency sheet, not an identity document. Each row should carry a method and a limit, not only a verdict. “Conforms” is acceptable for a comparative identification test; it is not acceptable for calcium, water or mesh, where a number and a basis are needed. Identity, calcium and water · calcium citrate anhydrous | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | Calcium reaction, citrate reaction and infrared spectrum | Conforms to reference | Calcium (Ca) | Complexometric titration | 21.0–24.0% | Loss on drying | Gravimetric, conditions stated | ≤1.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh ## Calcium, citrate and the water figure Complexometric titration reports elemental calcium. EDTA binds the calcium ion in an alkaline buffer, an indicator marks the endpoint, and the calculation uses the sample weight and the titre. The number is real, but it is not specific: carbonate, oxide and the tetrahydrate all put calcium into the same flask. The citrate test and the water line carry the specificity. The catalog method line also names citrate titration. Where the laboratory reports citrate quantitatively, read it as a second measurement; where it reports “citrate conforms”, the infrared spectrum is doing the work. The certificate should say which one was run, because a reaction and an infrared match prove presence, not proportion. Loss on drying is the hydrate gate. The anhydrous limit is ≤1.0%; the tetrahydrate limit is ≤13.0%. The drying temperature and time belong in the method column: a 1.0% limit run at 105 °C for two hours is a different test from one run at 150 °C to constant weight. A water result near 12% is not an anhydrous lot with a problem; it is a different material. Check the basis on the calcium line. The catalog window applies to the material as sold. If the certificate also gives a dried-basis figure, the water explains the gap: 23.7% as sold with 0.6% water becomes 23.84% dried. A result near 24.0% is close to the stoichiometric 24.1%; a result near 21.2% is at the floor of the window and needs the water line before the hydrate is accepted. ## Release limit versus batch result The specification defines the gate; the batch result records what was measured. They belong in separate columns, with the method beside each, so a reviewer can reproduce the release decision. How the release limit and the batch result should sit together | Parameter | Release limit | Result column | Calcium | 21.0–24.0% as sold | A measured percentage, with the method and the basis | Loss on drying | ≤1.0% | A measured percentage, with temperature and time | Identification | Conforms to reference | The calcium and citrate tests that were run | Heavy metals | Per element | A separate mg/kg figure for each metal | Microbiology | Counts and absence | The plate count plus the absence wording for the lot | Particle size | ≥95% through 80 mesh | The measured percentage through the named sieve A total heavy-metal figure is not a substitute for the four elements: a sum hides which metal is present. For microbiology, a count without the absence statement is half a result. A certificate missing one of those lines is incomplete, not automatically failed. ## What moves between batches Water is the variable that moves first. A lot that has absorbed surface moisture reads higher on loss on drying and lower on calcium as sold, while the dried-basis calcium stays close to the same value. A lot that is fully anhydrous reads near zero water and close to 24% calcium. The pair of lines tells you which end of the range the lot is on, and the water line is the only one that shows it. Mesh and flow follow the mill and the sieve, so they can change with no change in chemistry. Colour follows the calcium source and the drying step; a grey cast is not an identity failure, but a consistent drift across lots deserves a question about the source. The lot code should follow the certificate, the pack and the retained sample. ## When to order an outside test A referee laboratory earns its place for an unfamiliar source, a first entry into a regulated market, a hydrate dispute, or a citrate figure the supplier does not report. The useful panel is targeted: calcium by titration, citrate by reaction and infrared or by HPLC, loss on drying under a named procedure, ICP-MS for the metals and a micro count. Add thermogravimetry or Karl Fischer when the water form is the dispute, and X-ray diffraction when crystalline carbonate or oxide is suspected. These methods answer different questions: loss on drying sees everything volatile, Karl Fischer sees water, and thermogravimetry shows the temperature at which the mass leaves. A “not detected” line is only as strong as its stated detection limit. ## What to compare between suppliers Set out six columns: hydrate and formula; calcium with method and basis; citrate identification; loss on drying with its conditions; metals and microbiology; mesh and lot code. If two offers agree on calcium but not on the hydrate or the water, they are not the same product. Then check traceability: the manufacturer, the plant, the lot and the retained sample. A valid certificate that cannot be tied to the drum on the dock is a paperwork failure, not a quality result. The catalog figures are on the calcium citrate anhydrous product page. The hydrate comparison is on the grade page; the tests that separate the forms are on the identity page; the method notes are collected under analytical methods; release practice is on the quality page. ### 02 Calcium citrate anhydrous or tetrahydrate: choosing the hydrate URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-citrate-anhydrous/grades/ Reviewed: 2026-11-20 Both products are calcium citrate; the difference is how much water sits inside the crystal. The anhydrous salt is Ca3(C6H5O7)2 with about 24.1% calcium and no water of crystallisation, while the tetrahydrate adds four water molecules, 12.6% of its mass, and carries about 21.1% calcium. The catalog numbers follow: 21.0–24.0% calcium and ≤1.0% loss on drying for the anhydrous product, 21.0–22.0% and ≤13.0% for the tetrahydrate. In one lineFour molecules of water are 12.6% of the tetrahydrate's mass: they lower the calcium figure, raise the powder weight for a given claim, and change the label arithmetic. ## One salt, two crystal forms Calcium citrate can crystallise in more than one hydrate state. In the tetrahydrate, four water molecules occupy defined sites in the lattice; the anhydrous salt has no such water. This is a crystal difference, not a coating or a blend, and it survives every calculation that starts from the formula mass. The commercial anhydrous grade is commonly made by driving the lattice water out of the tetrahydrate. The dryer has to go far enough to clear the water and gently enough to leave the citrate intact; the ≤1.0% loss-on-drying gate is the evidence that the step worked. A lot that still holds lattice water is the other product. Both grades are milled to 80 mesh for capsules, tablets and sticks. The choice starts with the calcium claim and the space in the unit, then moves to the label and the purchase order. ## The two products side by side Calcium citrate anhydrous and calcium citrate tetrahydrate | Property | Anhydrous | Tetrahydrate | Formula | Ca3(C6H5O7)2 | Ca3(C6H5O7)2·4H2O | Molecular weight | 498.44 | 570.49 | Calcium | About 24.1% | About 21.1% | Water of crystallisation | None | 12.6% by mass | Catalog calcium window | 21.0–24.0% | 21.0–22.0% | Loss on drying | ≤1.0% | ≤13.0% | Calcium in 1 g of salt | About 241 mg | About 211 mg | Salt for 500 mg calcium | About 2.07 g | About 2.37 g The last two rows are what reach the label and the capsule. The same calcium claim needs about 14.5% more tetrahydrate, or the same weight of tetrahydrate delivers about 30 mg less calcium per gram. That is stoichiometry, not a purity grade. ## Solubility, moisture and flow Water solubility is low for both forms, around 1 g/L, and rises in dilute acid. Neither contains carbonate, so neither fizzes in acid. Solubility is pH dependent, and the citrate can leave solution as the salt approaches neutral; that matters in a drink and little in a capsule. The anhydrous salt is the one that wants its water back. Left open in humid air it takes up moisture and the loss on drying climbs; the tetrahydrate already has its lattice water and mostly collects surface moisture. This is why the foil pouch and the drum liner matter more for the anhydrous grade, and why an opened pack needs a new seal rather than a folded top. Flow and bulk density depend on milling and sieving. Both products are catalogued at 80 mesh, with granulation on request. Do not assume the anhydrous salt is denser or freer-flowing; ask for the bulk density of the lot and trial it in the press or the capsule filler. ## Dose arithmetic and the label Start with 500 mg of calcium. At 24.1% the anhydrous salt needs about 2.07 g; at 21.1% the tetrahydrate needs about 2.37 g. The 300 mg gap is roughly half a 650 mg capsule fill, enough to change the unit count or the tablet weight. At a fixed 1,000 mg of salt, the anhydrous form delivers about 241 mg calcium and the tetrahydrate about 211 mg. A label that declares elemental calcium keeps the claim and changes the powder weight when the hydrate changes. A label that declares the salt weight changes the calcium delivered. The two styles lead to different specifications, and a purchase order that names only “calcium citrate” does not say which one is being bought. Water of crystallisation is not free water in the blend; it is part of the crystal. The tetrahydrate is therefore not a “wet” ingredient in a dry mix, and the anhydrous form is not automatically required for every low-moisture formula. The reason to choose anhydrous is mass: more calcium per gram, less powder per claim, and a tighter water gate. ## What to write into the specification - “Calcium citrate anhydrous, Ca3(C6H5O7)2, CAS 813-94-5.” - “Calcium 21.0–24.0% by complexometric titration, reported on the material as sold.” - “Loss on drying ≤1.0%, with the drying temperature and time stated on the certificate.” - “Identification by calcium reaction, citrate reaction and infrared spectrum; conforms to reference.” - “Particle size ≥95% through 80 mesh; heavy metals and microbiology as listed.” - “No tetrahydrate above the water limit; no carbonate, oxide or citric acid added.” Put the hydrate in the product name, not in a footnote. A specification that opens with “calcium citrate” and gives only a calcium window can be met by either hydrate; the water limit is the line that makes it specific. ## When the other hydrate is the wrong choice If the label, the fill weight or the validated process is built on the tetrahydrate, the anhydrous salt is a change control, not a drop-in. The tablet may compress differently, the capsule count may fall and the calcium per unit may rise. Those are formulation changes even though the parent salt is the same. If a customer specification or a compendial monograph names the tetrahydrate, do not substitute the anhydrous form against that document. If the calcium claim is fixed and the fill is already at its limit, the anhydrous form is the one that fits; if the salt weight is fixed and the label expects the tetrahydrate's calcium, the anhydrous form over-delivers. Put the choice in writing before the first lot is made. The catalog figures are on the anhydrous product page. The tetrahydrate specification is on the calcium citrate product page; the narrow comparison is on the anhydrous versus tetrahydrate page; the water test is covered under analytical methods; release practice is on the quality page. ### 02.1 Calcium citrate anhydrous vs tetrahydrate: water, calcium and the label URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-citrate-anhydrous/grades/calcium-citrate-anhydrous-vs-tetrahydrate/ Reviewed: 2026-11-20 Calcium citrate anhydrous and calcium citrate tetrahydrate are the same calcium salt with four molecules of water between them. The water is 12.6% of the tetrahydrate's mass, so the anhydrous form carries about 24.1% calcium against 21.1%, and the tetrahydrate needs about 14.5% more powder for the same claim. The difference shows up in the loss-on-drying limit, the dose arithmetic and the label, not in the citrate anion. In one lineFour water molecules are 12.6% of the tetrahydrate's mass, and that water changes the calcium figure, the powder weight and the label arithmetic. ## The water of crystallisation The two hydrates are not two purities of the same powder. In the tetrahydrate, four water molecules sit in defined sites in the crystal; the anhydrous salt has none. The water is part of the crystal, not free moisture in the blend, and it leaves at a characteristic temperature when the crystal is dried. The formula mass is 570.49 g/mol for the tetrahydrate and 498.44 g/mol for the anhydrous salt; the 72.05 g/mol gap is the four water molecules. The catalogs turn that into a release test. Loss on drying is ≤1.0% for the anhydrous product and ≤13.0% for the tetrahydrate. The tetrahydrate's theoretical water is 12.6%, so its 13.0% limit covers the lattice water plus a little surface moisture. The anhydrous limit leaves almost no room for surface water, which is why the pack and the storage condition belong in the specification rather than in a warehouse note. A water figure near 12% is not a wet anhydrous lot; it is the other hydrate. A water figure near 0.5% is not a better grade of tetrahydrate; it is the anhydrous salt. The number has to be read with the hydrate named on the order. ## What the water does to the calcium figure Both forms have the same 3:2 calcium-to-citrate ratio. The calcium percentage differs because the water adds mass to the formula without adding calcium, so the same three calcium ions are spread over a larger molecule. Calcium citrate anhydrous against the tetrahydrate | Property | Anhydrous | Tetrahydrate | Formula | Ca3(C6H5O7)2 | Ca3(C6H5O7)2·4H2O | Molecular weight | 498.44 | 570.49 | Calcium | About 24.1% | About 21.1% | Water of crystallisation | None | 12.6% by mass | Loss on drying limit | ≤1.0% | ≤13.0% | Calcium in 1 g of salt | About 241 mg | About 211 mg | Salt for 500 mg calcium | About 2.07 g | About 2.37 g Those two calcium figures are the whole practical difference. The citrate anion, the taste and the acid behaviour are the same; the mass per calcium ion is not. A buyer who compares the two products on calcium percentage alone is comparing the hydrate, not the quality. ## What the label has to declare In the European Union the permitted-source entry in Annex II to Directive 2002/46/EC is written for “calcium salts of citric acid”, not for a named hydrate. The ingredient list names the source as the law names it; “anhydrous” is a specification description, not a separate source entry. The EU declaration gives a milligram figure for calcium and a percentage of the 800 mg reference intake. On the US side, the Supplement Facts panel declares elemental calcium and names the salt in the ingredient list; the Daily Value is 1,300 mg. Neither market requires the word “anhydrous” in the source name, but the number in the panel has to match the powder that was weighed. That is the label consequence: the hydrate decides whether a declared salt weight delivers 241 mg or 211 mg of calcium per gram. Two label styles make the arithmetic visible. A label that declares 500 mg of elemental calcium needs about 2.07 g of the anhydrous salt or 2.37 g of the tetrahydrate. A label that declares 1,000 mg of calcium citrate delivers about 241 mg of calcium from the anhydrous salt or 211 mg from the tetrahydrate. The hydrate belongs in the specification, the batch record and the label review, even when it does not appear on the front of the pack. ## Dose and the dosage form A 500 mg calcium claim is a useful fixed point. At 24.1% it needs about 2.07 g of the anhydrous salt; at 21.1% it needs about 2.37 g of the tetrahydrate. The 300 mg difference is roughly half a 650 mg capsule fill. A two-capsule serving of the tetrahydrate can become a smaller capsule count with the anhydrous salt, or the same count with a lower fill weight. At a fixed salt weight the difference runs the other way: 1,000 mg of anhydrous salt delivers about 241 mg calcium, and 1,000 mg of tetrahydrate about 211 mg. A formula that switches hydrate without changing the weigh-up changes the calcium claim by about 30 mg per gram of salt. That is a label change, not a rounding difference. Choose the anhydrous form when the calcium claim is fixed and the fill or tablet weight is tight, or when the low water limit is the point of the purchase. Choose the tetrahydrate when the label, the process and the validated fill are already built around it. Neither is a drop-in for the other at the balance. ## Writing the specification - “Calcium citrate anhydrous, Ca3(C6H5O7)2, CAS 813-94-5.” - “Calcium 21.0–24.0% by complexometric titration, on the material as sold.” - “Loss on drying ≤1.0%, with the drying conditions stated on the certificate.” - “Identification by calcium reaction, citrate reaction and infrared spectrum.” - “Particle size ≥95% through 80 mesh; heavy metals and microbiology as listed.” - “No tetrahydrate above the water limit; no carbonate, oxide or citric acid addition.” A specification copied from the tetrahydrate will fail the anhydrous product at the water line, and one copied the other way can accept the tetrahydrate inside the anhydrous calcium window. The hydrate, the calcium window and the water limit belong on the same page, and the label arithmetic belongs beside them. ## What changes when you switch A change of hydrate is a change of mass, not a change of salt. The powder weight per claim, the capsule count or tablet weight, the water limit, the flow of the lot, the label arithmetic and the customer's change control all move together. The stability file moves too, because the anhydrous form is the more hygroscopic of the two. Trial the new mass before the label is printed: fill or compress it, check the taste and the pH in the matrix, and repeat the water test after storage. A switch that looks neutral in a spreadsheet is a new specification and a new label revision. The anhydrous product hub carries the catalog figures; the tetrahydrate product page carries the parent specification; the method notes cover the water and citrate tests; the quality page describes the release file. ### 03 Calcium citrate anhydrous: moisture, pack and shelf life URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-citrate-anhydrous/stability/ Reviewed: 2026-11-20 The anhydrous crystal carries no water of crystallisation, so the storage question is not what it loses but what it takes back. In a sealed pack at ordinary warehouse temperature the powder is stable, and the 1.0% loss-on-drying limit is a narrow allowance for the water that arrives from the air. The failures to watch are moisture pickup, caking, and a matrix that changes pH or pulls calcium into an insoluble salt. In one lineThe anhydrous form has no water of crystallisation to lose, so the number to watch is the water it gains and the seal that keeps it out. ## The dry solid A crystal with no water in its lattice is a good absorber of water. The 1.0% limit does not leave room for a pouch that has been open on a bench for a week: surface water arrives first, the powder starts to cake, and the loss-on-drying figure moves before the calcium figure does. That is the moisture budget this grade is working with. Caking is the physical sign. The 80 mesh powder has a large surface for its mass, and a light, dusty lot will take up water faster than a dense, granular one. Pallet weight, temperature cycling and a humid filling room add to the effect. Keep the sealed pack in a dry store, off the floor, away from direct sun, and let a cold container reach room temperature before opening so condensation does not settle on the powder. The pack is the barrier, and the seal is the weak point. A foil pouch protects a small quantity; a fiber drum with a food-grade liner protects a production lot. Once either is opened, the remaining material needs a new moisture barrier and a date. A screw-top jar is not equivalent to a heat-sealed pouch, even when the lid feels tight. ## In solution and slurry Water solubility is low, around 1 g/L, and it improves as the pH falls. A drink formulator is therefore working near the solubility ceiling: at an acidic pH more of the calcium stays in solution, while a neutral or lightly buffered mix is closer to the point where the salt comes back out. A clear product needs a bench trial, not a calculation alone. Other anions compete for the calcium. Phosphate and sulfate can form sparingly soluble calcium salts and take the mineral out of solution, so the formula has to be checked for them as well as for pH. A suspension sidesteps solubility by keeping the powder dispersed, but it needs a thickener and a resuspension test; a sediment that will not redisperse is a formulation failure, not a stability result. Citrate does not release carbon dioxide in acid, so a citrate drink does not fizz. The taste is saline-sour and grows more noticeable as the dose rises, which is a flavour decision rather than a stability one. ## What actually moves the material What moves calcium citrate anhydrous in storage and in formula | Factor | Effect | Control | Humidity | Surface water, caking, slower flow | Sealed liner; dry store; reseal opened packs | Warm, humid air | Water uptake; possible hydrate reformation | Controlled store; check the transport leg | Acid | Dissolution; pH shift; citrate complexes | Trial the acidulant and the final pH | Phosphate or sulfate | Calcium salt precipitation | Look for competing anions in the formula | Compression | Capping, lamination, density change | Set the tablet force and lubricant by trial | Pack integrity | Water vapour or odour through the pack | Foil pouch, lined drum, seal that stays closed Rows one and two concern storage; three and four concern the formula; five and six concern the process and the pack. Most failures sit in one row, and the row points to the file that needs the fix. ## A stability protocol A study for this grade should answer a hydrate question as well as a potency question. Store the marketed pack at 25 °C/60% relative humidity for the long term, 30 °C/65% for an intermediate condition, and 40 °C/75% for the accelerated arm. Test at 0, 3, 6, 12 and 24 months, and keep the same panel at each point so the trend is readable. The panel should include calcium by complexometric titration, loss on drying, citrate identification, mesh, microbiology and the heavy-metal screen. Add thermogravimetry or X-ray diffraction at the intermediate and accelerated points if the water figure moves, because those methods can show whether the water is on the surface or back in the lattice. A loss-on-drying result alone cannot make that distinction. Run the study in the pack that will be sold, not in a generic container. A pouch and a drum present different surface areas and different headspace, so a result from one container does not carry over to the other. The accelerated arm predicts; the long-term arm assigns the date. ## The matrix decides more than the drum A tablet press can change the powder's density and its failure mode, so a lot that ran well on one press may cap on another. A capsule shell and its excipients can pass water into the fill even when the bulk powder was released dry. A stick is dominated by its acidulant and flavour system, and a gummy by water activity and pH. The anhydrous grade is useful in low-water formats, but the process can add water after the certificate is signed: wet granulation, aqueous film coating, a syrup, or a humid filling room. Check loss on drying after the process, not only on the incoming lot. The raw-material file and the finished-product file answer different questions, and both are needed. ## Assigning a shelf life The retest period is a property of the pack and the storage condition, not a constant of the molecule. A sealed foil pouch or a lined drum can carry 24 months when the long-term data support it, and a longer period is possible with a longer study. The figure on the specification should be traceable to a report that names the pack, the conditions, the timepoints and the tests. After opening, the clock changes. The remaining powder should be resealed, kept dry and used within the in-use period on the label. A first shipment into a hot climate deserves a retest on arrival: a container that has sat on a dock in summer can be warmer than the warehouse the stability data describes, and the water figure is the first line to show it. The limits are on the COA page; the hydrate choice is on the grade page; the MOQ page lists the packs; catalog data sits on the product hub; the test methods are under analytical methods; the release workflow is on the quality page. ### 04 Calcium citrate anhydrous: MOQ, packs and lead time URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-citrate-anhydrous/moq/ Reviewed: 2026-11-20 The order starts at 1 kg because that is the smallest factory pack with its own lot code, not because smaller quantities are impossible. The standard units are a 1 kg foil pouch and a 25 kg lined fiber drum, and standard material is quoted at 1–7 days. A quotation is only firm when the hydrate, the water limit, the pack, the destination and the documents are all named. In one lineThe 1 kg pouch is the qualification unit: it covers a trial, a retained sample and an independent test without breaking a bulk lot. ## Why the minimum is 1 kg Ask what a minimum is for. Here it is the point at which the material still has a factory pack and a lot code. A kilogram supports a bench trial, a retained sample and a referee test, and it can travel as a parcel. That combination is the reason for the number. Smaller quantities can be arranged, but they are repacks: the powder leaves a bulk lot, gets a new container and a handling record. That is fine for a quick look and poor for a qualification, because the repack no longer represents the pack that will be bought. The 25 kg drum is the production unit; it lowers handling per kilogram but ties up inventory and storage time. Neither size is a volume reward. ## Packs and formats Standard calcium citrate anhydrous packs | Pack | Construction | Typical use | Handling | Foil pouch | Moisture-barrier foil with food-grade liner | Trial, sample, small batch | Reseal after opening; keep dry | Fiber drum | Fiber drum with polyethylene liner | Production | Palletised; inspect the liner before unloading | Granulated powder | On request | Flow and dust control | A separate specification and certificate The catalog form is an 80 mesh powder: ≥95% through 80 mesh. Granulation is a different specification, not a packing choice, because it changes the particle profile and may change the lead time. If the dosage form needs a freer-flowing powder, say so before the quotation. Each pack label should show the lot code, the product name, the hydrate, the mesh, the net weight, the two dates and the storage wording. The lot code is the thread that ties the pack to the certificate and the retained sample. ## Lead time and dispatch Standard material ships within 1–7 days of order confirmation. The clock is picking, paperwork and dispatch; freight, clearance and the customer's own quality release sit outside it. A granulation or a special mesh needs a production run and a fresh certificate, so it takes longer and should be quoted separately. Get a dispatch date in writing. A pouch usually moves as a parcel, a drum as a pallet, and the Incoterm decides who arranges freight and who handles clearance. The COA and the other lot documents should travel with the material. ## What a quotation needs Six details a calcium citrate anhydrous quotation needs | Detail | What to state | Why it matters | Product and hydrate | Calcium citrate anhydrous, CAS 813-94-5, mesh | “Calcium citrate” alone describes two products | Specification | Calcium, loss on drying, citrate identity, metals, micro | Sets the release file and the certificate | Quantity and pack | 1 kg pouch, 25 kg drum, granulation | Sets handling and lot allocation | Destination and Incoterm | Country, named place and trade term | Sets the delivery point and documents | Documents | COA, TDS, SDS, allergen and origin statements | Defines what ships with the lot | Intended use and market | Supplement or food, destination market | Changes the statements the file needs The hydrate is the first blank most enquiries leave empty. “Calcium citrate 21%” points to the tetrahydrate, while “calcium citrate 24%” points to the anhydrous salt; the two are different purchases. Commercial terms are quoted per order and are not published here. ## The sample is a lot The 1 kg pouch can serve as the qualification sample. Ask for its lot code and certificate, test identity, calcium, loss on drying and microbiology, and keep a portion sealed as the retained sample. A sample that carries no lot code is a demonstration, however good the powder looks. The sample lot is not the production lot. If the order moves to a drum, compare the drum COA with the sample COA and bridge the two with an identity check. A match on calcium is not enough if the water differs, because the hydrate is the variable that changes the label arithmetic. Run the tests listed on the COA page, and put a small press or fill trial beside them. A certificate cannot show how the powder flows, and the trial is the only evidence for that. ## Terms to settle before the first order Keep the commercial and quality terms in one place: Incoterm, pack, dispatch window, specification revision, a certificate for every lot, a retained sample, a retest period and the change-control route for a hydrate or source change. A quality agreement signed before the first production order is easier than a negotiation after a surprise. If a lot is disputed, the retained sample and a joint test against the named method decide it. Agree in advance who funds the referee laboratory and which laboratory is acceptable to both sides. A return argued from a photograph of the drum is weak for both parties. The catalog figures are on the product hub; the release tests are on the COA page; the market files are on the compliance page; the test methods are under analytical methods; the release workflow is on the quality page. ### 05 The regulatory file for calcium citrate anhydrous URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-citrate-anhydrous/compliance/ Reviewed: 2026-11-20 The permission for this ingredient is written for the calcium salt, while the label arithmetic depends on the hydrate. In the EU, calcium citrate falls under the permitted calcium source entry for calcium salts of citric acid; in the US it is a GRAS food ingredient and a dietary ingredient used in supplements. The buyer's regulatory team confirms the route, and the file has to connect the specification, the dose and the label to that route. In one lineThe permitted-source entry covers calcium citrate, not a named hydrate; the hydrate, the dose and the label arithmetic are the buyer's file. ## Permission and description are different questions Start with the split between permission and description. Permission asks whether the calcium source may be used in the market. Description asks which hydrate is in the pack, at what dose, and with what label. A file that answers only the first is a legal summary, not a product file. The permission belongs to the salt. The hydrate is a specification identity, and the label arithmetic has to use it, because a gram of anhydrous salt carries about 241 mg calcium while a gram of tetrahydrate carries about 211 mg. Keep four things in the folder: the specification, the lot certificate, the destination route and the change record. The certificate supports the lot; it does not decide the route. The route, the dose and the label review sit with the buyer's team, and the supplier's change control covers source, process and pack. ## European Union The EU framework is Directive 2002/46/EC. Annex II, as amended by Commission Regulation (EC) No 1170/2009, lists the permitted calcium sources, and this material falls under the entry for “calcium salts of citric acid”. The list does not name a hydrate; that is a product specification matter, not a second permission. Labelling follows Regulation (EU) No 1169/2011: the declaration states calcium in milligrams and expresses it as a share of the 800 mg reference intake, while the ingredient list uses the source name the law uses. Contaminants are governed by Regulation (EU) 2023/915, and claims by Regulation (EC) No 1924/2006. The additive identity E 333(iii) tricalcium citrate is a separate food-additive entry and does not replace the supplement source listing. Check the consolidated texts in force at the time of sale; this is a review, not a legal opinion. Great Britain keeps its own retained version of the permitted-source list. Northern Ireland follows the EU text. The delivery address decides which applies, and the decision should be recorded with the order. ## United States In the US, calcium citrate is used as a dietary ingredient in supplements and is affirmed GRAS for food use at 21 CFR 184.1195. The seller should be able to state the dietary-ingredient basis it relies on for the intended use. Premarket approval is not part of the supplement route; current good manufacturing practice under 21 CFR 111 is, together with the label. The Supplement Facts panel gives elemental calcium against the 1,300 mg Daily Value that applies from age four, and the salt is named in the ingredient list. Any structure/function statement is the brand's to substantiate, carries the DSHEA disclaimer, and cannot be a disease claim. California Proposition 65 is a separate exposure calculation driven by the daily dose. ## Contaminants and the dose The catalog limits describe the powder. The finished product file needs the contribution from that powder at the real inclusion rate, compared with the destination ceiling. Catalog limits and the finished-product calculation | Element | Catalog limit | What the finished-product file must show | Lead (Pb) | ≤3 mg/kg | Lot result multiplied by the inclusion rate, against the destination limit | Cadmium (Cd) | ≤1 mg/kg | Lot result and any category exception that applies | Mercury (Hg) | ≤0.1 mg/kg | Lot result and method | Arsenic (As) | ≤2 mg/kg | The limit both sides accept, plus the method used In the EU the finished-product ceiling comes from Regulation (EU) 2023/915. The US has no federal limit for these elements in supplements, so state rules such as Proposition 65 do the work. Report each element separately; a total heavy-metal figure hides the one that matters, and a raw-material result that passes can still fail after the inclusion rate is applied. ## Claims On the EU side, calcium claims are available only from the authorised list in Regulation (EU) No 432/2012, each with its own conditions. They are nutrition claims, not disease claims. On the US side, a structure/function statement is the brand's responsibility: truthful, substantiated and followed by the disclaimer. The hydrate does not create a new claim, but it changes the calcium figure the label declares. This page makes no health claim for calcium citrate anhydrous. It sets out the specification, the methods and the framework. Whether a claim can be made is a decision for the brand and the destination market. A statement about the formats the powder suits is a description, not a claim. ## The document file - Lot COA with calcium, citrate identity, loss on drying, the metal panel and microbiology. - A specification and TDS that state the hydrate, the mesh and the 1.0% water limit. - Safety data sheet in the 16-section format. - Statements on allergens, GMOs, origin, irradiation and solvents. - A stability summary for the actual shipping pack. - The US basis for use as a dietary ingredient and the present UK position. - Halal or kosher certificates only if the label claims them, plus any third-party test the review requires. Version-control the folder. A certificate that quotes a superseded specification is a gap in the file even when every number passes. ## Before the first order - Can calcium citrate be used as a calcium source in the destination market, and has the national notification been filed? - Does the specification name the hydrate, and does the label arithmetic use it? - Do the contaminant contributions from the real dose stay inside the finished-product ceiling? - Is calcium on the label declared against the correct reference intake, with the source named? - Is the wording an authorised claim, or a substantiated structure/function statement with the disclaimer? - Do the specification, the COA and the label describe the same hydrate, mesh and calcium figure? The catalog figures are on the product hub; the certificate lines are on the COA page; the identity tests are on the identity page; the methods are under analytical methods; the release workflow is on the quality page. ### 06 How to prove a lot is calcium citrate anhydrous URL: https://nutrition.rainwoodbio.com/products/minerals/calcium-citrate-anhydrous/identity/ Reviewed: 2026-11-20 Calcium titration will pass the anhydrous salt, the tetrahydrate and several other calcium powders, so the certificate needs tests that rule those alternatives out. This product is proved by the combination of a calcium figure near 24.1%, a citrate reaction and infrared match, and loss on drying at or below 1.0%. The water result is the one that removes the tetrahydrate, which would otherwise sit inside the 21.0–24.0% calcium window. In one lineCalcium alone cannot name the hydrate: the 21.0–24.0% window admits the tetrahydrate, and the 1.0% loss-on-drying limit is what excludes it. ## The identity layers Read the certificate as a process of elimination rather than a single tick. Each layer narrows the list of materials that could produce the number above it, and a layer that is missing leaves the alternatives open. Five layers of calcium citrate anhydrous identity | Layer | Question | Test | What it proves | Document | Is the hydrate named? | Name, CAS number, formula | Paperwork only | Calcium | Is calcium inside the window? | Complexometric titration | Quantity, not the anion or the hydrate | Citrate | Is the anion citrate? | Reaction and infrared spectrum; HPLC if quantitative | The salt family | Water | Is it the anhydrous form? | Loss on drying; TGA or Karl Fischer if disputed | The hydrate state | Crystal | Which solid form is present? | X-ray diffraction | Anhydrous against tetrahydrate; carbonate or oxide Calcium is the broadest filter. Citrate narrows it to the salt family. Water names the hydrate, and the crystal layer can confirm what the water figure implies. None of the four quantitative layers proves the others. ## The calcium-to-citrate ratio Charge balance fixes the ratio: three calcium ions to two citrate anions, or 1.5 calcium per citrate. In the anhydrous formula that works out to about 24.1% calcium and 75.9% citrate; the tetrahydrate carries about 21.1% calcium, 66.3% citrate and 12.6% water. The ratio is the same in both hydrates; only the water changes the percentages. A worked check makes the arithmetic usable. If a lot reports 23.9% calcium and 75.2% citrate, divide each by its molar mass: 23.9 ÷ 40.078 = 0.596 mol calcium, 75.2 ÷ 189.1 = 0.398 mol citrate, ratio 1.50. A ratio near 1.33 means extra citrate, which points to added citric acid; a ratio near 1.60 means extra calcium from another salt. The ratio tests consistency, not potency. A routine certificate may not quantify citrate at all. If the proportion matters to the purchase, request a citrate assay by HPLC or titration and name the method; otherwise the identity rests on the reaction and the infrared spectrum, which show that citrate is present but not how much. ## XRD, TGA and the crystal form X-ray diffraction sees the lattice. The anhydrous salt and the tetrahydrate have different patterns, and a scan can confirm the hydrate independently of the water figure. The same scan can reveal crystalline calcium carbonate as calcite, with a reflection near 29.4° two-theta, or calcium oxide as lime, with its own peaks. Thermogravimetry adds the temperature dimension. A tetrahydrate loses its water in a step that an anhydrous lot does not show, and the size of the step estimates the amount. Loss on drying is the routine release test; TGA is the referee when the form is disputed. Ask for the reference pattern, the sample preparation and the detection limit. A “match” without the pattern is a conclusion, and a “not detected” without a limit describes the method's sensitivity rather than the sample. XRD is not a routine release test here, but it is the direct answer when the question is crystal form. ## What adulteration looks like Common substitutions and the signals | Adulterant | What it does | Signal | Test | Tetrahydrate | Raises water and lowers calcium | Loss on drying around 10–13% | Loss on drying, TGA, XRD | Calcium carbonate | Raises calcium; adds no citrate | High calcium, no citrate, gas in acid | Citrate identity, XRD for calcite | Calcium oxide | Raises calcium; alkaline slurry | Very high calcium, high pH | XRD for lime, pH | Citric acid | Raises citrate; lowers the ratio | Calcium-to-citrate ratio below 1.5 | Citrate assay, ratio | Surface water | Raises loss on drying; lowers as-sold calcium | Dried-basis calcium normal | Loss on drying, Karl Fischer The first row is the most likely substitution because it is the same salt, and the calcium window can accept it. Water is the first screen. Carbonate and oxide are the next risks; both raise calcium, but carbonate removes the citrate and oxide lifts the pH. Appearance adds little, because white to off-white covers a wide family of powders. ## How to write identity into the specification - “Calcium citrate anhydrous, Ca3(C6H5O7)2, CAS 813-94-5.” - “Calcium 21.0–24.0% by complexometric titration, reported on the material as sold.” - “Loss on drying ≤1.0%, with the drying conditions stated; no tetrahydrate above that limit.” - “Identification by calcium reaction, citrate reaction and infrared spectrum.” - “Citrate content by HPLC on request, with the calcium-to-citrate ratio reported.” - “No added calcium carbonate, calcium oxide or citric acid; XRD screen on request.” A calcium-and-mesh specification could describe several calcium powders. The hydrate, the citrate test and the adulterant clause are what narrow it to this one. ## Five questions for the supplier - Which hydrate does this lot represent, and what loss on drying is on its certificate? - What calcium figure, method and basis are reported? - How was citrate identified, and is a quantitative citrate result available? - Does the file contain an XRD or TGA result for the solid form, and what detection limit is stated? - Has any carbonate, oxide or citric acid been added, and what evidence backs that answer? Answers to those five questions build an identity file; a calcium percentage alone does not. The certificate lines are on the COA page; the hydrate comparison is on the grade page; the narrow comparison is on the anhydrous versus tetrahydrate page; the methods are under analytical methods; the catalog figures are on the product hub; the release workflow is on the quality page. ### 01 What the COA for collagen tripeptide actually contains URL: https://nutrition.rainwoodbio.com/products/protein-collagen/collagen-tripeptide/coa/ Reviewed: 2026-11-20 A collagen tripeptide certificate has to answer three questions that sound alike: how much protein the powder contains, how much of it is peptide, and how much is three residues long. The first is a nitrogen calculation, the second a size separation, the third a chromatographic measurement against a defined standard. A certificate that reports only the first has not described this product. In one lineProtein, peptide and tripeptide are three different measurements of the same powder; a certificate is auditable only when each carries its method, its limit and a loss-on-drying result. ## What the certificate has to show A batch certificate is a test report. Every row should let a reader reconstruct the release decision without asking the supplier what a number meant. That requires three columns as a minimum: the parameter, the technique that produced the value, and the limit the lot was released against. A results column is what turns the report into evidence. Release tests and limits · collagen tripeptide, catalogue specification | Test | Technique | Limit for release | Appearance | Visual | Off-white to pale yellow powder | Protein | Kjeldahl, N × 5.55 | ≥90.0% | Tripeptide content | HPLC | ≥30.0% | Peptide content | SEC-HPLC | ≥80.0% | Loss on drying | Gravimetric | ≤7.0% | Ash | Gravimetric, furnace | ≤5.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh Protein, peptide and tripeptide are the rows that matter. Protein says how much nitrogenous material is present. Peptide content says how much of the powder behaves as peptide rather than as free amino acid or salt. Tripeptide content says how much of it is the short fraction. A lot can satisfy the first and miss the third. ## Three denominators: protein, peptide and tripeptide Protein is the broadest figure. The laboratory digests the sample, measures nitrogen and multiplies by 5.55, the factor used for collagen because its nitrogen sits near 18% of the protein mass. The result is usually reported on a dry basis, which is why the moisture line matters: 90.0% protein at 7.0% loss on drying equals about 83.7% of the powder as weighed. A buyer comparing an as-is figure with a dry-basis figure is comparing two different powders. Peptide content comes from a size separation. SEC-HPLC sorts the soluble material by molecular size and reports the share that falls in the peptide window, excluding free amino acids and salts. The result is a share of the material, not a share of the protein figure, and the certificate should say which detector and which calibration were used. Tripeptide content is the narrowest figure. The HPLC method separates the low-mass fraction and integrates the peaks that correspond to three-residue peptides, but “tripeptide” is a class, not a single peak. The certificate should name the standard, list which peptides are counted and state the integration rules. Without that, 30.0% is a number that another laboratory may not reproduce. One ratio is useful. If a lot sits at the floor on both counts, 30.0% tripeptide inside 80.0% peptide means tripeptides make up 37.5% of the peptide fraction. A lot that reports 34% and 82% is not the same material, even though both pass. ## The gate and the result are different columns A release limit is the boundary the lot had to stay inside. A result is what the instrument read on that lot. Printing the limit twice, once as a “result”, is the most common way a certificate looks complete while saying nothing. The table below sets out what the result column should contain for each release test. What the measured-result column should hold | Test | Limit | Result entry | Protein | ≥90.0%, dry basis, N × 5.55 | A percentage with the factor and basis stated | Tripeptide content | ≥30.0% by HPLC | A percentage and the chromatogram | Peptide content | ≥80.0% by SEC-HPLC | A percentage and the size distribution | Loss on drying | ≤7.0% | A measured percentage | Heavy metals | Per element | A separate mg/kg figure for each element | Microbiology | Counts and absence | The lot count and the absence statement A line that reads “complies” is a conclusion, not a measurement. The reader cannot audit it, compare it with another lot or use it in a finished-product calculation. For this product the tripeptide row deserves the closest reading, because it is the one that cannot be inferred from any other result. ## Where lots drift The raw material sets the starting composition, and the hydrolysis decides how far the chains are cut. A longer hydrolysis pushes the curve toward smaller peptides; the fractionation step then decides how much of that small fraction is kept. Change the membrane cut-off or the concentration factor and the tripeptide figure can move by several points while the protein result stays flat. Drying changes the loss on drying and the colour. Milling and sieving change only the particle-size result, which is why an 80 mesh figure can move when the mill is serviced without any chemistry changing. Colour is the least quantitative signal: off-white to pale yellow is a wide window, and a shift inside it is not a grade failure. A powder that becomes distinctly darker or duller has usually met moisture and heat together, and the retained sample is the right comparison. Single results near a limit are less informative than a trend. Results clustered just above the floor tell a different story from results spread around 34%, even though both sets pass. Plot the tripeptide and peptide figures against the lot date and read the direction. ## Independent testing: when and what An outside laboratory is worth its time when the source is new, when the destination is regulated and the file is being built, when a tripeptide statement is central to the label, or when a result is disputed. The panel should be chosen to answer the open question rather than to repeat the whole certificate. For a source qualification, ask for protein with the factor, hydroxyproline as the collagen marker, tripeptide content with the chromatogram, SEC-HPLC distribution, species PCR and the contaminant panel on the same sample. Ask every laboratory for its detection limit; “not detected” without a limit says nothing about the sample. Keep the sample identity and the lot code with the report. ## Reading two quotations side by side Line up six items: the protein result with its factor and basis; the tripeptide result with its definition; the peptide content and distribution; the loss on drying and ash; the species and tissue; the pack, metals and micro results. Two offers that agree on protein but differ on tripeptide are offers for different materials. Then check traceability. The certificate should identify the manufacturer, the tissue, and the hydrolysis, fractionation, drying and milling steps. The catalogue specification is on the collagen tripeptide product page. The analyses that separate this fraction from a standard collagen peptide are described on the identity page; the chromatographic method is in the HPLC method note; the wider methods section covers the other techniques; the release workflow is on the quality page. ### 02 Tripeptide content, peptide content and source: choosing a collagen tripeptide grade URL: https://nutrition.rainwoodbio.com/products/protein-collagen/collagen-tripeptide/grades/ Reviewed: 2026-11-20 Collagen tripeptide is sold as one catalogue grade, but three variables still have to be fixed on the specification: the tripeptide floor, the peptide content and the source. Within the grade, the powder is supplied at 80 mesh and can be granulated on request, and that choice changes flow, dust and fill weight. The grade decision is therefore a specification decision, not a choice between brand names. In one lineThe grade is the tripeptide figure, the peptide distribution and the source; the protein percentage alone does not describe any of the three. ## Why the tripeptide figure is the grade Collagen is hydrolysed to make peptides, and the hydrolysate is then fractionated to enrich the smallest chains. A tripeptide is three amino acids long. The most common one in collagen is glycine-proline-hydroxyproline, with a molecular weight of about 285 Da, and it is one of the reasons the tripeptide fraction is separated from the rest of the hydrolysate. The catalogue floor is ≥30.0% tripeptide by HPLC; the rest of the powder is a mixture of dipeptides, longer peptides, free amino acids and salts. The floor is a share, not a purity. A product at 30.0% tripeptide is not 70% impurity: most of the remaining mass is collagen peptide that has not been cut to three residues. That is why the tripeptide figure has to be read beside the peptide content, which is specified at ≥80.0% by SEC-HPLC. The two figures together say how much of the powder is peptide and how much of that peptide is the short fraction. Protein is the third figure and the least specific. At ≥90.0% by Kjeldahl with N × 5.55, it confirms that the powder is protein-rich, but it cannot distinguish a tripeptide-enriched fraction from a standard collagen peptide. A supplier who quotes only protein has not quoted this product. ## The two collagen products side by side Catalogue figures · collagen tripeptide and standard collagen peptides | Figure | Collagen tripeptide | Standard collagen peptides | What it decides | Protein (N × 5.55) | ≥90.0% | ≥90.0% | Nitrogen mass, not peptide size | Tripeptide content | ≥30.0% by HPLC | — | The fraction this product is bought for | Peptide content | ≥80.0% by SEC-HPLC | ≥90% below 3,000 Da by SEC-HPLC | Share of mass in the peptide range | Hydroxyproline | — | 8.0–12.0% | Collagen marker | Loss on drying | ≤7.0% | ≤7.0% | Storage behaviour and as-is basis | Ash | ≤5.0% | ≤2.0% | Mineral residue | Particle size | ≥95% through 80 mesh | — | Flow, dust and dispersion The two columns are different specifications, not two positions on one scale. The standard peptide is defined by a molecular-weight cut-off with no tripeptide floor; this product is defined by a tripeptide floor. The comparison is taken further on collagen tripeptide versus collagen peptides. ## The powder in the drum The catalogue appearance is an off-white to pale yellow, free-flowing powder. The colour is a little warmer than the white to off-white of a standard collagen peptide, and a shift within that window is not a grade change. The material is hygroscopic, so the powder should be handled in a dry room and the pack closed between weighings; an open scoop left on a bench will pick up moisture and begin to cake. At 80 mesh the powder is finer than a 40 mesh material, which improves dispersion in a stick pack but increases dust and static during weighing. Granulation is available on request. It changes the particle size and the flow, not the tripeptide or peptide figures, and the granulation aids have to be named in the specification and on the certificate. The ash limit of ≤5.0% is wider than the ≤2.0% typical of a standard collagen peptide. Ash is the mineral residue left after ignition, and a lot that sits near the limit deserves a question about the fractionation and neutralisation steps rather than an automatic rejection. The number is a gate; the batch record explains it. ## What the grade means in the finished product For capsules and tablets, the constraint is mass per serving and flow on the press. A 500 mg fill holds 500 mg of powder, so the tripeptide delivered depends on the batch figure: 500 mg at the 30.0% floor is 150 mg of tripeptide, and a lot at 35.0% delivers 175 mg in the same fill. That is arithmetic for the label and the weigh-up, not a suggested intake. For powder sticks and drink mixes, the constraint is dispersion and taste. The finer powder wets out quickly and gives a clear to slightly opalescent solution at typical use levels; a granulated grade disperses more cleanly in a shaker but may take longer to wet. Neither change alters the chemistry, and neither is a reason to accept a different tripeptide figure. State the tripeptide figure on the specification, not only the protein range. A formula built on a 30.0% material and switched to a 35.0% lot delivers more tripeptide for the same fill weight, which is a label and change-control question rather than a manufacturing convenience. The COA page shows where the figure is reported. ## What to write into the specification - “Collagen tripeptide, hydrolysed collagen fraction; source species and tissue stated on the certificate.” - “Protein ≥90.0% by Kjeldahl (N × 5.55), with the factor and basis printed on the COA.” - “Tripeptide content ≥30.0% by HPLC; method, standard and integration rules stated.” - “Peptide content ≥80.0% by SEC-HPLC; distribution reported, not only the total.” - “Loss on drying ≤7.0%; ash ≤5.0%; particle size: at least 95% through 80 mesh.” - “Heavy metals Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg; microbiology as listed; allergen statement naming the source.” A specification that names only protein and appearance does not describe this grade. The three figures, the source and the particle size are what a laboratory can test against and what a purchaser can compare between suppliers. ## When the standard grade is the better buy If the formula already carries several grams of collagen peptides per serving and the tripeptide figure is not part of the purchase, the standard peptide grade is the simpler specification. It has a hydroxyproline range, a molecular-weight cut-off and a wider document base, and it does not require the tripeptide method to be agreed and validated. If the label names “collagen peptides” rather than a tripeptide fraction, switching the material to this grade changes the declared ingredient and the grams per serving. That is not a like-for-like substitution, and it should be handled as a formulation change with a new label review. The catalogue specification for the standard grade sits on the collagen peptides product page, and the full catalogue for this product is on the collagen tripeptide product page. The supporting analyses are set out on the identity page, and the methods section explains the assays behind the figures. ### 02.1 Collagen tripeptide vs collagen peptides: the fraction, the dose and the label URL: https://nutrition.rainwoodbio.com/products/protein-collagen/collagen-tripeptide/grades/collagen-tripeptide-vs-collagen-peptides/ Reviewed: 2026-11-20 Collagen tripeptide and collagen peptides are not two grades of the same purchase. The tripeptide product is a hydrolysate enriched for three-residue peptides, with a floor of ≥30.0% tripeptide and ≥80.0% total peptide; a standard collagen peptide is specified by protein and a molecular-weight cut-off, with no tripeptide floor. The difference changes the grams per serving that deliver a given tripeptide mass, and it changes the label. In one lineCollagen tripeptide is a fraction of hydrolysed collagen, not a synonym for it; the tripeptide figure, the grams per serving and the label name all change when you switch. ## A fraction, not a different protein Both products start as collagen that has been hydrolysed. The standard peptide is sold as the hydrolysate, defined by how much of it falls below a molecular-weight cut-off. The tripeptide product goes one step further: the hydrolysate is fractionated to enrich the smallest chains, and the specification then sets a floor on the tripeptide share. A tripeptide is three amino acids. In collagen the most common one is glycine-proline-hydroxyproline, at about 285 Da, and it sits at the small end of the distribution. The enrichment also includes dipeptides and other tripeptides, so the product is a mixture, not a single molecule. The 30.0% floor describes how much of the powder is three residues long, and the ≥80.0% peptide figure describes how much is peptide at all. That is why the two names are not interchangeable. A standard collagen peptide can be 90% protein and still have no tripeptide floor, because most of its mass is in longer chains. The protein figure cannot tell the two materials apart; the tripeptide figure can. ## The two specifications side by side Catalogue figures · collagen tripeptide and standard collagen peptides | Figure | Collagen tripeptide | Standard collagen peptides | What it decides | Protein (N × 5.55) | ≥90.0% | ≥90.0% | Nitrogen mass, not peptide size | Tripeptide content | ≥30.0% by HPLC | — | The fraction this product is bought for | Peptide content | ≥80.0% by SEC-HPLC | ≥90% below 3,000 Da by SEC-HPLC | Peptide share and size profile | Hydroxyproline | — | 8.0–12.0% | Collagen marker | Loss on drying | ≤7.0% | ≤7.0% | Storage and as-is basis | Ash | ≤5.0% | ≤2.0% | Mineral residue | Particle size | ≥95% through 80 mesh | — | Flow, dust and dispersion The standard column is a different specification, not a looser version of the first. It sets a molecular-weight cut-off and a hydroxyproline range; the tripeptide column sets a tripeptide floor and a peptide content. A buyer who needs one cannot assume the other is equivalent because the protein figures match. ## The dose arithmetic changes The label declares the mass of the ingredient, so the tripeptide delivered depends on the batch figure. One gram of collagen tripeptide at the 30.0% floor carries about 300 mg of tripeptide; the same gram at 35.0% carries 350 mg. A 500 mg capsule therefore delivers 150 mg of tripeptide at the floor, and a two-capsule serving delivers about 300 mg. For a standard collagen peptide, the same arithmetic is not available unless the supplier reports a tripeptide figure. Five grams of a standard peptide at an unreported tripeptide share cannot be converted into tripeptide mass, and a comparison that counts five grams of one as five grams of the other is comparing the wrong quantity. If the tripeptide share matters, it has to be specified and measured for both materials. The arithmetic is not a recommended intake. It is the bridge between the certificate, the fill weight and the label: a formulator targeting a tripeptide mass sizes the fill from the batch figure, while a formulator targeting total collagen mass does not need the tripeptide floor. ## What the label has to say The label names the ingredient, and the name has to match the material and the market. In the EU, “hydrolysed collagen” is the usual ingredient declaration, with “collagen tripeptide” as a technical descriptor that may sit beside it; the buyer's label reviewer decides whether the descriptor can stand alone. Where the collagen is fish-derived, the fish allergen declaration applies. In the United States, the Supplement Facts panel names the dietary ingredient in the form the supplier's basis supports, and the fish allergen declaration applies to supplements as well. The declared quantity is the ingredient mass. Writing “collagen tripeptide 1 g” on a label whose certificate is 30.0% tripeptide is accurate as an ingredient statement; writing “1 g tripeptide” is not. If the brand wants the tripeptide mass on the label, the batch figure and the arithmetic have to support it, and the label reviewer has to accept the presentation. Composition descriptors such as “tripeptide” or “low molecular weight” are defensible when the specification supports them. Absorption and bioavailability language is a different category: it needs evidence for the finished product and may be a health claim in the destination market. It does not follow from the fraction alone. ## When to choose which Choose the tripeptide product when the tripeptide figure is part of what is being bought and the dosage form is mass-constrained: a capsule, a tablet or a small stick where several grams of powder per serving will not fit. The tripeptide floor is the reason the material exists, and the specification should carry it. Choose the standard collagen peptide when the formula already carries several grams per serving, when the label names collagen peptides, and when the hydroxyproline range and the molecular-weight cut-off are the figures the buyer needs. It is a broader specification with a longer document history, and it does not require a tripeptide method to be agreed. Neither choice is settled by the protein percentage. The decision is the fraction, the grams per serving and the label, in that order. The catalogue for the standard grade is on the collagen peptides product page; this product's catalogue is on the collagen tripeptide product page. ## What a switch involves A switch in either direction is a formulation change, not a purchasing substitution. Replacing 5 g of standard collagen peptide with 1 g of collagen tripeptide changes the powder mass, the flow, the taste and the declared quantity on the label, even if the tripeptide mass is held constant. The stability of the new matrix has to be checked, and the sensory result has to be tasted rather than assumed. Change control should move with the material: a new specification revision, a new COA with the tripeptide and peptide figures, a label review and a stability check for the pack. The grades page sets out the choices within this product; the COA page shows where the tripeptide figure is reported; the HPLC method note explains the separation; the methods section covers the supporting tests; the quality page describes the release file. ### 03 Collagen tripeptide is hygroscopic; the pack and the matrix set the shelf life URL: https://nutrition.rainwoodbio.com/products/protein-collagen/collagen-tripeptide/stability/ Reviewed: 2026-11-20 Collagen tripeptide is hygroscopic, so its storage behaviour is dominated by water rather than by the peptide itself. A sealed pack keeps the powder free-flowing and the loss on drying inside its limit; an open pack in humid air does not. Heat speeds the change, and any liquid format adds process and microbial risks that the dry powder never meets. In one lineMoisture and heat are what change the powder in storage; the shelf life belongs to the pack, the matrix and the test panel, not to the certificate. ## The powder: water first, colour second At the catalogue limit, loss on drying is ≤7.0%. That is the water allowed at release, not a reservoir the powder may refill in storage. Once a pouch is opened, the peptide surface adsorbs water from the room. The powder starts to clump, the loss on drying climbs towards and past the limit, and the protein figure calculated on an as-is basis falls even though the peptide has not changed. The rate depends on the surface exposed and the air around it. A thin layer left on a weighing tray can take up more water in an afternoon than a closed drum takes up in a month. A dry room, a closed pack and a short weighing window are the controls that matter. Colour moves more slowly than water. Off-white to pale yellow is the catalogue window, and a lot can drift within it without failing. A sharper change, toward a deeper yellow or a dull grey, usually means moisture and heat have acted together, and it may appear before loss on drying reaches its limit. Odour tells a similar story: a broth note that becomes stronger in a warm store is a signal to open the retained sample and compare, not a reason to condemn the lot from the label. Temperature cycling is worse than a steady warm store. Warm days and cool nights can move moisture within a sealed pack and condense it on the cooler surfaces, and a cold pack brought into a warm room will collect condensation if it is opened too soon. Let the pack reach room temperature before cutting the seal. ## The solution: process heat, pH and microbes The powder disperses in water to a clear to slightly opalescent solution. Once dissolved, the material is no longer protected by low water activity. A pasteurisation or hot-fill step applies heat that the powder never sees, and a protein solution held warm is a favourable medium for microbes. A stick pack avoids both problems because the consumer adds water at the point of use. pH changes the picture as well. Near neutrality the solution is easiest to handle; a strongly acidic drink can alter clarity and taste, and an alkaline matrix can shift the colour over a long hold. If the formula carries a reducing sugar, heat and water together open a browning route that is unrelated to the peptide but will be blamed on it in a taste panel. For a liquid, validate the hold time in the actual matrix. Light protection, pH control, low dissolved oxygen and a defined microbial limit are the starting controls. A result from powder stored in a pouch does not predict what happens in a sweetened drink at pH 3.5. ## What drives the change Storage factors for collagen tripeptide | Factor | Effect on the material | Practical control | Water vapour | Adsorption, caking, higher loss on drying | Sealed pack; dry room; short exposure | Heat | Faster moisture uptake; colour drift | Cool store away from dryers and roofs | Temperature cycling | Condensation inside the pack | Stable store; equilibrate before opening | Oxygen | Surface colour and odour change | Low headspace; reseal promptly | Light | Yellowing of powder and solution | Opaque pack; dark store | Matrix pH and sugars | Haze, colour and browning in liquids | Validate pH, sugar source and heat load None of these acts alone. A warm, bright, humid room combines three of them, and a sweetened drink in clear glass combines the last row with light and oxygen. The useful question is always the same: which pack, at which condition, for how long? ## A protocol for the ingredient Set the study up around the pack that will be sold. Long-term storage at 25 °C/60% relative humidity, intermediate storage at 30 °C/65% relative humidity and accelerated storage at 40 °C/75% relative humidity are the usual frame, with a light-exposure arm for the pack and a control kept in the dark. If the powder will be granulated, study the granulated form as well. The test panel should include protein, tripeptide content, peptide content, loss on drying, appearance and microbiology. The tripeptide and peptide lines are the ones that show whether the fraction itself has moved; a protein result alone can stay flat while the distribution shifts. Report the individual values at each time point, not a single pass statement, and identify the lot and the pack on every page. Pouch and drum need separate data. Their headspace, surface-to-volume ratio and opening history differ, and a result from one does not transfer to the other. If the pack changes, the study changes with it. ## What the finished formula adds Capsules and tablets start dry, yet the shell and the excipients can still hand moisture to the fill. Measure loss on drying at release and after storage, and inspect the powder inside the capsule as well as the shell. The shell also traps odour, which is why a capsule can take a grade that a stick pack cannot. A stick pack is only as good as its seal. A pinhole lets humid air into a strip that otherwise looks intact, so seal integrity belongs in the release checks as well as in the stability study. A drink mix in a sachet often adds a sugar matrix to the same seal, and both the moisture and the browning routes then apply. A ready-to-drink beverage adds process heat, pH and oxygen. The ingredient's bulk data is the starting point; the shelf life has to be measured in the drink. An overage, if one is used, is a label and stability decision, and it does not compensate for a pack that admits water. ## How the shelf life is set The retest period is a property of the pack and the storage condition, supported by the stability file. It is written into the specification rather than inferred from the certificate, and it should be quoted with the pack it applies to. A shelf-life figure with no pack and no test panel behind it is not usable in a quality agreement. When the retest period expires, the retained sample has to be measured again before any extension. Extension is not automatic, and a bulk result cannot be carried over to a container that has been opened and repacked. A repack is a new pack for stability purposes. The standard packs are listed on the product hub; release testing is described on the COA page; packs and lead time are on the MOQ page; the chromatographic method is in the HPLC method note; the release workflow is on the quality page. ### 04 Collagen tripeptide: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/protein-collagen/collagen-tripeptide/moq/ Reviewed: 2026-11-20 Collagen tripeptide is supplied in two pack sizes: a 1 kg foil pouch, which is also the minimum order, and a 25 kg fiber drum. Lead time for either standard pack is 1–7 days from confirmation. A quotation only becomes comparable when it names the tripeptide and peptide figures, the source, the pack, the destination and the documents. In one lineThe minimum is a pack decision: 1 kg is the smallest unit that carries its own lot code, retained sample and certificate. ## Why 1 kg is the floor Ordering by the kilogram is a consequence of how the material is made and released, not a sales threshold. A batch is blended, sampled, tested and packed as a lot, and the smallest pack that can carry that identity is the 1 kg pouch. Open a 1 kg pouch and you have a traceable sample, a trial quantity and a retained portion from the same lot code. A smaller request usually turns into a repack. The powder is drawn from a larger lot, put into a bag that did not exist in the batch record, and shipped with either a copy of the parent certificate or no certificate at all. The chemistry does not change; the traceability does. If a few hundred grams are enough for a bench trial, ask for the split in writing and have the parent lot code on the label. At the other end, the 25 kg drum lowers handling per kilogram but ties up inventory. It suits a production campaign that will consume the drum inside its retest period. The choice between pouch and drum is therefore a storage and consumption decision as much as a quantity decision. ## Packs and formats Standard collagen tripeptide packs | Pack format | Quantity | Where it fits | Handling | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; close it between weighings | Fiber drum | 25 kg | Production campaign | Lined; lot code repeated on drum and liner | Granulated grade | On request | Flow and dust control | Different particle profile; aids declared The standard powder passes 80 mesh. That is a finishing specification, and it is the right one for capsules, tablets and most stick fills. Granulation is a separate specification, not an alternative bag: it changes the particle-size line, adds a processing step and may add an aid that has to appear on the specification. Say which one the line needs before the quotation, because the answer changes both the lead time and the particle-size line. Pack and storage should be chosen together. A pouch that will be opened weekly for a small trial is better than a drum that stays half-used for months; a drum that will be consumed in one campaign is better than twenty pouches. Neither removes the need for a dry, cool store, because the powder is hygroscopic. ## From confirmation to dispatch The 1–7 day window covers picking, document preparation and hand-over to the carrier. It does not include transit, customs or the customer's own quarantine and release. When the material is needed for a production date, ask for the dispatch date in writing and work backwards through the transport and the internal release, not forwards from the order date. Pouch and drum travel differently. The pouch is a parcel; the drum goes on a pallet and needs the right Incoterm to say who books it and who clears it. The certificate, specification, SDS and allergen statement should be sent with the shipment or ahead of it. A COA that arrives after the drum has been quarantined delays the release even when the material is correct. ## Six details a quotation needs - Material and fraction. Collagen tripeptide, with ≥30.0% tripeptide by HPLC and ≥80.0% peptide by SEC-HPLC named on the offer. - Source. Species and tissue, because the allergen statement and the label follow from them. - Pack and particle form. 1 kg pouch or 25 kg drum; 80 mesh powder or a granulated grade. - Quantity and destination. The number of packs, the country and the Incoterm. - Documents. COA, specification, SDS, allergen, GMO and origin statements, plus any market declaration. - Use and market. The category the material goes into and the country where the finished product will be sold. An offer that lists a protein percentage and a bag size has not quoted this product. The tripeptide figure, the source and the destination are part of what is being sold; without them the buyer cannot check the material against the label or the market file. ## A sample that can be qualified Take the qualification sample from a released lot, not from a hand-filled bag at the end of a shift. Record the lot code, the date of opening and the condition of the pack, then test the tripeptide content, the peptide distribution, protein, loss on drying and microbiology. If the sample passes, the same lot code should appear on the first commercial pack. Keep a portion of the sample under the specified storage condition. It becomes the comparator if a later lot behaves differently in dispersion, colour or taste. A retained sample without a lot code is a souvenir; one with a code is the start of the batch file. For a trial that needs less than a kilogram, record the split as its own pack. It has an opening date, a handling history and a shorter useful life than the sealed pouch. Write those facts into the trial record rather than assuming the parent certificate covers the repack indefinitely. ## What the quality agreement should settle Before the first production order, put the specification revision, the per-lot COA, the retained sample, the retest period and the change-notification route in one document. Add the name of the referee laboratory both sides accept and the procedure for a joint re-test. Those are the clauses that matter when a result is disputed; they are much harder to negotiate after a drum is on hold. Change notification deserves its own line for this product. A new source, a different membrane cut or a changed drying step can move the tripeptide figure even when the protein result looks familiar. The buyer should hear about the change before the next shipment and receive a new specification revision and a COA that reflects it. The catalogue specification is on the collagen tripeptide product page. Release tests are set out on the COA page, the market file on the compliance page, the definition of the minimum in the MOQ glossary entry, and freight in the logistics section. ### 05 The regulatory file for collagen tripeptide URL: https://nutrition.rainwoodbio.com/products/protein-collagen/collagen-tripeptide/compliance/ Reviewed: 2026-11-20 Collagen tripeptide is a food ingredient made from collagen, and its regulatory file turns on the source, the fraction and the market. The specification and the certificate describe what is in the drum; the file has to show where it came from, how it may be used and how the label will read. That route is confirmed by the buyer's regulatory team, market by market. In one lineThe specification describes the fraction; the regulatory file shows the source, the permitted use and the label for the destination. ## What the file has to hold Four records sit at the centre of the file: the current specification for the tripeptide fraction, the certificate for the lot, the destination's rules on use and labelling, and a change-control log covering source, process and pack. The COA accounts for the lot, the TDS for the specification and the SDS for handling. None of them decides whether the material can be sold in a given country. Supporting documents sit around those four: the species and tissue declaration, the allergen statement, the GMO statement, the origin record, and any processing-aid or residual-solvent declaration the route requires. A missing item is easier to close at quotation than after the drum has been quarantined, so keep a versioned checklist at the front of the folder. Two attributes distinguish this product from a generic collagen peptide file. The source determines the allergen and the label vocabulary, and the fraction determines the specification lines that must match the claim. A file that names neither is not yet a file for collagen tripeptide. ## European Union For a supplement sold in the EU, two questions come first: is the material permitted, and how must it be described? The labelling rules sit in Regulation (EU) No 1169/2011; contaminant limits sit in Commission Regulation (EU) 2023/915 as of this review. Collagen peptides have no harmonised maximum use level, so the intake assessment for the finished product, not the ingredient specification, fixes the grams per serving. Novel-food status is checked for the exact source and process in the EU Novel Food Catalogue before the first shipment. A well-established collagen hydrolysate is not automatically the same case as a new source or a new fractionation route, and the entry that applies has to match the material actually placed on the market. Fish is the allergen to watch. Where the collagen is fish-derived, Annex II of Regulation (EU) No 1169/2011 applies, and the exemptions for gelatine carriers and fining agents are tied to those specific uses. A hydrolysed fish collagen in a supplement does not inherit them by default; the label review decides and records the answer with the order. ## United States In the US, the starting question is the dietary-ingredient basis the supplier relies on and whether that basis covers the finished product. The supplier names the basis and supplies the document behind it; the buyer checks the intended use and the claim against it. The certificate supports the material, not the regulatory position. The Supplement Facts panel names the dietary ingredient and declares the quantity as sold. If the collagen is fish-derived, the major food allergen declaration applies to dietary supplements, so the fish statement belongs in the panel and not only in the specification. Structure/function wording needs substantiation and the DSHEA disclaimer, and no disease claim is available in this market. ## Contaminants and the finished dose The metal panel is measured on the ingredient but assessed on the finished product. The references below are a starting point for a supplement dossier; the market text and the daily intake fix the final number. Contaminant references to confirm for the finished product | Parameter | Reference for a supplement | Evidence the file needs | Lead (Pb) | 3.0 mg/kg | Measured result, method, release limit and dose conversion | Cadmium (Cd) | 1.0 mg/kg | Measured result plus any category exception | Mercury (Hg) | 0.10 mg/kg | Measured result and the analytical method | Arsenic (As) | Customer or market limit | The limit both sides agreed, with its method The ingredient specification carries Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg. Those limits are not interchangeable with the finished-product references, because the calculation passes through the grams per serving. A 500 mg capsule and a 5 g stick can use the same lot and still place different amounts of a metal in the product. ## Naming the ingredient and the quantity The label must use the name the destination allows and state the source where the market requires it. “Collagen tripeptide” is a technical description of the fraction; whether it may stand alone, or must appear alongside “hydrolysed collagen”, is a question for the destination's label reviewer. The declared quantity is the mass of the ingredient, not the mass of tripeptide. One gram of collagen tripeptide certified at 30.0% tripeptide contains about 300 mg of tripeptide, and that calculation belongs in the product file. If the brand wants a tripeptide quantity on the label, the batch figure, the serving size and the label text all have to agree. ## Composition descriptors and health claims A statement about tripeptide content or molecular size is a description of composition, provided it is accurate, supported by the certificate and not misleading. “Tripeptide” or “low molecular weight” is defensible only when the method and the figure are on the specification. A descriptor without that backing is a claim waiting to be challenged. Absorption, bioavailability or “fast uptake” wording is a different category. It needs evidence for the finished product, and in some markets it is a health claim. That review belongs to the brand and its regulatory adviser, not to the ingredient page. This site publishes the specification and makes no health claim; no disease-related claim is made in this document. ## The document set Start with the lot certificate: protein with its factor, tripeptide and peptide results with methods, loss on drying, ash, metals and micro. Add the specification with the tripeptide floor and peptide content, the source species and tissue, the TDS, the SDS, the allergen and GMO statements and the origin record. Where the source is bovine, include the TSE/BSE statement; where the process or the granulation uses a solvent or an aid, add the declaration for it. Species PCR is an extra, not a routine release line. It is worth requesting for a new source, a first shipment or a disputed lot. The identity page explains what each test proves, and the EU regulatory notes gather the framework references. ## Before the first order - The specification names the fraction, the tripeptide floor, the peptide content and the source. - The lot file holds the COA, TDS, SDS, allergen, GMO, origin and, where relevant, TSE/BSE statements. - The novel-food position has been checked for the exact source and process, for an EU destination. - The metal results have been converted to the finished dose. - The label and claims have been reviewed for the destination, including the fish allergen where it applies. - Source, fractionation and pack are covered by change notification. The catalogue specification sits on the collagen tripeptide product page, and the release file is described on the quality page. ### 06 How we prove a collagen tripeptide lot is the declared fraction URL: https://nutrition.rainwoodbio.com/products/protein-collagen/collagen-tripeptide/identity/ Reviewed: 2026-11-20 A collagen tripeptide lot is the declared material when four measurements agree: the protein figure with its nitrogen factor, the tripeptide content by HPLC, the peptide distribution by SEC-HPLC, and the declared species and tissue. The name on the certificate is the weakest of the four, because “collagen tripeptide” describes a fraction rather than one molecule and has no tripeptide-specific CAS number. Hydroxyproline is the supporting marker that the nitrogen is collagen nitrogen. In one lineIdentity is the tripeptide figure, the peptide distribution, the collagen marker and the declared source, read together rather than one at a time. ## The identity layers A name on a certificate is a beginning, not a proof. The layers below are independent questions, each requiring its own measurement; a supplier who answers only the first has given you stationery in place of evidence. Layers of collagen tripeptide identity | Layer | Question | Test | What it proves | Document | Are the fraction and the source named? | Name, CAS number, species and tissue | Paperwork only | Protein | Is the nitrogen collagen nitrogen? | Kjeldahl with N × 5.55, hydroxyproline | Collagen origin, not peptide size | Tripeptide | Is the material cut to three residues? | HPLC against a defined standard | The fraction the product is sold as | Peptide | How much of the powder is peptide? | SEC-HPLC distribution | The size profile and the share in range | Source | Which species and tissue? | Species-specific PCR | The declaration The catalogue CAS number, 9007-34-5, is the family entry for collagen; it does not distinguish a tripeptide fraction from a standard hydrolysate. That is why the document layer cannot carry the identity argument on its own. ## The ratios that hold the story together At the catalogue limits, ≥30.0% tripeptide inside ≥80.0% peptide means tripeptides are at least 37.5% of the peptide fraction. That ratio is not a specification line, but it is a useful check: a lot with 31% tripeptide and 81% peptide sits near the floor on both counts, while a lot with 38% tripeptide and 82% peptide is comfortably inside it. Neither is better in the abstract; the point is that the two figures have to move together. Hydroxyproline is the second ratio. Collagen carries roughly 10% hydroxyproline by protein mass, and a collagen-derived fraction should show the same marker. Hydroxyproline is not on this catalogue specification, so it is an additional test; request it when the collagen origin is the open question or when a new source is being qualified. A protein figure that passes while hydroxyproline sits far below the collagen range points to nitrogen that is not coming from collagen. The mass balance is the third check. Protein is specified on a dry basis, so 90.0% at the 7.0% loss-on-drying limit is about 83.7% as weighed. Add the ash limit of 5.0% and the moisture of 7.0% and the three gates account for about 95.7% of the powder, leaving a few percent for fat, carbohydrate and other solids. The limits are independent gates, not a composition recipe; a lot can meet each one and still leave a gap that needs an explanation. ## Why X-ray diffraction does not identify the fraction Collagen tripeptide is amorphous. A diffraction scan gives a broad halo around 20° two-theta and no sharp reflections, and a standard collagen peptide, gelatin and a whey hydrolysate look much the same in that region. The method cannot measure the tripeptide content, the degree of hydrolysis or the species. Where XRD earns a place is the screen for crystalline additions. A crystalline carrier such as sodium chloride, lactose or a mineral diluent would return sharp reflections that an amorphous peptide powder does not, and that is a check on the drum rather than proof of identity. The XRD method note sets out what a phase scan can and cannot establish. ## What substitution looks like Substitution routes and the signals they leave | Route | What it does | Signal | Test | Standard collagen peptide sold as tripeptide | Passes protein; misses the tripeptide floor | Tripeptide low; peptide distribution longer | Tripeptide HPLC, SEC-HPLC | Gelatin or partly hydrolysed collagen | Genuine collagen with a longer curve | Higher molecular weight; gelling | SEC-HPLC, solubility check | Other protein | Raises protein at lower collagen content | Hydroxyproline low; amino acid profile differs | Hydroxyproline, amino acid profile | Non-protein nitrogen | Inflates Kjeldahl without adding peptide | Protein high; tripeptide and peptide low | Mass balance, amino acid profile | Free amino acid blend | Mimics the amino acid profile | Peptide content low; HPLC profile shifts | SEC-HPLC, tripeptide HPLC | Maltodextrin or salt dilution | Lowers the active fraction | Ash or carbohydrate up; peptide down | Ash, LOD, peptide content Colour is the weakest signal: off-white to pale yellow is a broad window, and a blend can be tinted to fit. What carries more weight is the pair of fraction figures, the hydroxyproline ratio and the species PCR. A certificate that lists appearance and protein but says nothing about the fraction has not tested the substitution that matters most. ## How to write the identity into the specification - “Collagen tripeptide, hydrolysed collagen fraction; species and tissue stated on the certificate.” - “Protein ≥90.0% by Kjeldahl with N × 5.55; factor and basis stated.” - “Tripeptide content ≥30.0% by HPLC; method, standard and integration rules stated.” - “Peptide content ≥80.0% by SEC-HPLC; distribution reported.” - “Hydroxyproline reported as the collagen marker where identity is to be confirmed.” - “Species checked by PCR when requested; the retained sample is held for the life of the lot.” ## Questions for the supplier - What is the tripeptide figure on this lot, and how does the method define a tripeptide? - Can you send the chromatogram and the SEC-HPLC distribution, not only the totals? - What is the hydroxyproline result, and what share of the protein does it represent? - Which species and which tissue are declared on the certificate, and is a PCR report available? - Is anything besides the declared collagen present as protein, nitrogen or granulation aid? Those five answers, taken together, are the identity file; one protein number is not. The catalogue is on the collagen tripeptide product page, the certificate lines on the COA page, the fraction on the grades page, the label consequences on the comparison page, and the release file on the quality page; the methods section explains the tests. ### 01 What the COA for dried ferrous sulfate actually contains URL: https://nutrition.rainwoodbio.com/products/minerals/ferrous-sulfate-dried/coa/ Reviewed: 2026-11-20 A dried ferrous sulfate certificate carries appearance, iron and sulfate identity, iron by titration at 30.0–33.0%, loss on drying at ≤1.0%, the heavy-metal panel, microbiology and particle size. Iron is the assay for this article: there is no separate “ferrous sulfate 99%” line, and a percentage written as the salt is not the same as the percentage of the element. The limits below belong to the catalog specification; a batch COA ties them to one pouch or drum. In one lineIron is the assay: 30.0–33.0% Fe by titration, with the loss on drying beside it and the hydrate named in the header. ## What each certificate line has to carry Read the header first. It should name the article, give the CAS number on the specification, and identify the lot and the pack. A certificate that says only “ferrous sulfate” leaves the hydrate open, and the hydrate separates this article from the heptahydrate. Each row needs the parameter, the method and the release limit. “Conforms” is a real result for identity when the reference is named. Iron, loss on drying and particle size are numbers, each in a row with the method beside it. Identity, iron, moisture and contaminants · dried ferrous sulfate | Parameter | Method | Release limit | Appearance | Visual | Gray-white to off-white powder | Identification | Iron and sulfate reactions; titration and gravimetric sulfate as the reference | Conforms to reference | Iron (Fe) | Complexometric or redox titration | 30.0–33.0% | Loss on drying | Gravimetric, with temperature and time stated | ≤1.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh ## The iron basis, the hydrate and the water line The iron result is reported on the material as received. That is the figure a fill weight uses: 31.0% Fe means 31.0 g of iron in 100 g of powder, so a 65 mg fill carries about 20 mg of iron. A result converted to a dried basis is a different number and must be labelled as such; at a loss on drying near 1.0% the arithmetic moves little, but the label still has to name the basis. The loss-on-drying line is not automatically a total-water figure. The nominal monohydrate, FeSO4·H2O, carries about 10.6% bound water by formula, and that water is part of the crystal rather than a surface contaminant. The ≤1.0% limit and the 30.0–33.0% iron window are release tests on different fractions; the iron figure is the practical control on the hydrate. If a specification needs total water, ask for Karl Fischer and name the method on the certificate. A “ferrous sulfate assay” should not appear without its calculation. At 31.0% Fe the powder is about 94.3% ferrous sulfate calculated as the monohydrate, yet it sits inside the 30.0–33.0% iron window. A salt percentage and an iron percentage answer different questions, and only one of them is on this specification. ## Release limit versus batch result The release limit is the boundary the lot had to meet; the batch result is the number the laboratory obtained. Keep them in separate columns and put the method beside each one. If the result column simply repeats the range, the reader has been given the gate again rather than the measurement. Limit and result in separate columns · dried ferrous sulfate | Parameter | Release limit | Result column | Iron | 30.0–33.0% | A measured percentage, with the method and the as-is basis | Loss on drying | ≤1.0% | A measured percentage, with the test conditions | Heavy metals | Per element | A measured mg/kg figure for each element | Microbiology | Counts and absence | A count plus an absence statement for the lot | Particle size | ≥95% through 80 mesh | The measured percentage through the sieve “Pb <3 mg/kg” is a statement about the method's limit; 0.4 mg/kg is a measurement. A single summed figure for heavy metals does not show which element is present. The ferric check is often missing as well: the total-iron titration does not separate Fe2+ from Fe3+. Ask for ferrous iron by redox titration beside a total-iron result, and read the gap as the ferric fraction. ## What shifts from lot to lot Iron and loss on drying move first. The 30.0–33.0% window is wide because the dried article is a mixture of hydrates rather than a single stoichiometric compound; a lot at 30.5% and a lot at 32.8% can both be correct. A batch at the top of the iron window and the top of the loss-on-drying window is an edge combination, and the two lines should be read together. Colour moves from gray-white towards yellow-brown as ferrous iron oxidises to ferric. Colour is a weak quantitative signal but a useful trigger: ask for the ferric result and the batch record instead of rejecting on appearance alone. Particle size is a finishing specification, so a mill or sieve change can move the 80 mesh result without any change in the chemistry. ## When an outside laboratory is worth it Order an outside laboratory when the source is new, when a first shipment is entering a regulated market, when the hydrate is disputed, or when the label names the dried article. The useful panel is not a repeat of the certificate: ferrous iron by redox titration, total iron by ICP-OES, sulfate by gravimetric barium sulfate or ion chromatography, water by Karl Fischer, XRD for the hydrate, ICP-MS for the metal panel and a micro count. Each screen should come with its detection limit; “not detected” without that limit says more about the method than about the powder. The laboratory should test the retained sample and put the lot code on the report. If a result is disputed, hand the referee the retained sample, the supplier's certificate and the specification, and ask for the tests that distinguish the hydrates, not another run of the same titration. ## Six lines to compare across suppliers Six lines make a useful comparison: article and CAS; iron result and basis; loss on drying; ferric figure; sulfate result; and traceability. If two quotes agree on iron but not on hydrate or basis, they are not quoting the same article. Six certificate lines to compare across suppliers | Line | What to ask | Why it matters | Article and CAS | Dried ferrous sulfate named, with the CAS number on the sheet | The hydrate controls the iron and water arithmetic | Iron | The measured figure, its basis and the method | The fill weight is calculated from this number | Loss on drying | The measured percentage and the test conditions | Loss on drying is not automatically total water | Ferric iron | The gap between total and ferrous iron | Oxidation can pass the iron window | Traceability | A lot code linking certificate, pack and retained sample | A correct certificate may describe another drum The specification is on the dried ferrous sulfate product page. The tests that separate the hydrates are set out on the identity page; the heptahydrate is a separate article on the ferrous sulfate page; the titration method is described in the complexometric method note; the release workflow is on the quality page. ### 02 Dried ferrous sulfate grades: the dried article and the heptahydrate URL: https://nutrition.rainwoodbio.com/products/minerals/ferrous-sulfate-dried/grades/ Reviewed: 2026-11-20 Dried ferrous sulfate is the partially dehydrated article specified at 30.0–33.0% iron; the heptahydrate is the fully hydrated crystal at 19.5–20.5% iron and 45.0–48.0% water. The dried grade puts roughly half again as much iron into the same weight, so a dose needs a smaller fill and brings less water into the blend. Both are ferrous sulfate, and neither is a drop-in for the other. In one lineWater, not purity, separates the two articles: the heptahydrate is about 20% iron and 45% water, the dried article is 30–33% iron with roughly 10–18% water, and that ratio sets the fill weight. ## Why the dried grade exists The two articles begin with the same ferrous sulfate. The heptahydrate is what crystallises out of water; the dried article is produced by removing part of that water, leaving a nominal monohydrate or a mixture of hydrates. The name describes a drying step, not a single chemical formula. That is why the specification has to carry an iron window and a loss-on-drying limit, not only the word. Water is the reason the dried grade exists: in a dry dosage form it is weight the capsule does not need. Per kilogram, the heptahydrate delivers about 201 g of iron and the dried article about 310 g at 31%. At 25 kg the difference is about 2.7 kg of iron per drum, which shows up as inventory, freight and warehouse space as well as fill weight. Purity is not what separates the two articles. Both can be high-purity and both can meet a heavy-metal panel. What changes is the mass of iron per gram of powder and the amount of water the formula has to carry. ## The two articles side by side Dried ferrous sulfate and ferrous sulfate heptahydrate compared | Property | Dried article | Heptahydrate | Formula | FeSO4·H2O, nominal | FeSO4·7H2O | CAS number | 7720-78-7 | 7782-63-0 | Iron content | 30.0–33.0% by specification | 19.5–20.5% by specification; 20.09% by formula | Water content | About 10.6% as the monohydrate; roughly 10–18% across the iron window | 45.36% by formula; catalog 45.0–48.0% | Iron per 100 mg | About 30–33 mg | About 20.1 mg | Mass for 20 mg iron | About 60.6–66.7 mg | About 99.6 mg | Appearance | Gray-white to off-white powder | Pale blue-green crystals or powder | Typical use | Capsules, tablets and dry blends | Solutions, syrups and crystal grades The masses above are calculated from the formulas; the batch certificate's iron result takes the place of the theoretical figure. Water is the other half of the comparison: the same 20 mg iron dose arrives with roughly 45 mg of water as the heptahydrate, against about 6–12 mg as the dried article. ## Powder, crystals and handling The catalog powder is specified at ≥95% through 80 mesh and is gray-white to off-white. It is free-flowing when dry, but it is hygroscopic: an open pouch picks up moisture, the powder cakes, and the surface can turn yellow-brown as ferrous iron oxidises. The heptahydrate is pale blue-green and crystalline, and it is efflorescent, so it can lose water in a dry store. Both need a sealed pack; the failure direction is different. The mesh figure is set at the mill, not by the reaction: a new sieve can change it while the chemistry stays the same, and granulation is a separate article rather than a packing choice. A capsule line with a fixed volume needs the bulk density and the particle-size distribution, not just the mesh number. Appearance is the least specific check. Gray-white to off-white covers a range, and a yellow-brown cast can be surface oxidation rather than a different article. Use the iron and ferric results before rejecting a lot on colour. ## Fill weight and the iron declaration Every calculation starts from the iron result, not from the salt weight. At 30.0–33.0% Fe, 20 mg of elemental iron is 60.6–66.7 mg of dried article; at 19.5–20.5% Fe, the same 20 mg is 97.6–102.6 mg of heptahydrate. At 40 mg the masses are 121.2–133.3 mg and 195.1–205.1 mg. These are examples, not a dose recommendation. The formulator notices the water first. At 20 mg of iron, the heptahydrate contributes about 45 mg of water to the fill; the dried article contributes roughly 6–12 mg. A tablet can see the water move into the granulation, a capsule can see a softened shell or a moisture-sensitive partner, and a blend can see its water activity and caking behaviour shift. In a 1 g stick pack, the dried article takes about 6.1–6.7% of the fill for 20 mg of iron; the heptahydrate takes about 9.8–10.3%. That changes the flow, the segregation risk and the amount of carrier the formulator needs. The label speaks in elemental iron, the order in salt weight, and the certificate's iron figure is the connection between them. ## Lines for the purchase specification - “Dried ferrous sulfate, CAS 7720-78-7, FeSO4·H2O nominal.” - “Iron 30.0–33.0% by complexometric or redox titration, reported as-is.” - “Loss on drying ≤1.0%, with the test conditions stated.” - “Identification of iron and sulfate; report the reference method.” - “Particle size ≥95% through 80 mesh; granulated on request.” - “Heavy metals and microbiology as listed; ferric limit to be agreed.” - “Hydrate, CAS and article name on the COA and the label.” - “Destination market and intended dose confirmed before the order.” A specification that names only “ferrous sulfate” describes a family, not a purchase: the family contains a 20% iron hydrate and a 30–33% iron dried article that behave differently on a fill weight. ## When the heptahydrate is the better choice A solution or a syrup is easier to build on the heptahydrate: it dissolves readily, and the water it brings is already part of the solvent. The dried article dissolves more slowly and offers no advantage in a liquid. A label that names the heptahydrate rules out a silent switch: the declared ingredient and the weighed powder would differ. The dried ferrous sulfate product page carries the catalog specification; the level-four comparison takes the water and label questions further; the heptahydrate page covers the other article; the methods library describes the iron assay; the quality page covers release. ### 02.1 Dried ferrous sulfate vs heptahydrate: water, iron and the label URL: https://nutrition.rainwoodbio.com/products/minerals/ferrous-sulfate-dried/grades/ferrous-sulfate-dried-vs-heptahydrate/ Reviewed: 2026-11-20 By formula the heptahydrate, FeSO4·7H2O, is 20.09% iron and 45.36% water; the dried article is a partially dehydrated solid at 30.0–33.0% iron, with the water of crystallisation reduced to roughly one to two molecules per ferrous sulfate. The same 20 mg iron dose is about 99.6 mg of heptahydrate or 60.6–66.7 mg of dried article, so the switch changes the fill weight, the water load and the ingredient name on the label. In one lineThe difference is water: about 45% in the heptahydrate and roughly 10–18% in the dried article, which is why the same iron dose weighs a third to two-fifths less. ## Two articles, one salt The two articles share the same salt; what differs is the amount of water locked into the crystal. The heptahydrate has seven molecules of water per ferrous sulfate. Drying removes most of that water but not all of it: the commercial article is nominally the monohydrate and in practice a mixture of hydrates. Three articles are often confused: the heptahydrate, the dried article and the anhydrous salt. The anhydrous salt carries no crystal water and takes up moisture most readily. This page compares the first two, because they are the two that appear on supplement labels and in purchase orders. The hydrate belongs to the article identity; it is not a purity grade. A certificate that says only “ferrous sulfate” has not identified the article. The iron and water figures are what separate them. ## Water of crystallisation The formula water is fixed: 45.36% for the heptahydrate and 10.60% for the monohydrate. The commercial dried article sits across a window. At 33.0% Fe the powder is close to the monohydrate and carries about 10.2% water; at 30.0% Fe it carries about 18.4% water, because more hydrated forms are present. The 30.0–33.0% iron window is therefore also a water window. Iron and water in the heptahydrate and the dried article | Article | Iron | Water | Mass for 20 mg Fe | Heptahydrate | 20.09% by formula | 45.36% by formula | About 99.6 mg | Dried, nominal monohydrate | 32.87% by formula | 10.60% by formula | About 60.9 mg | Dried, at the 30.0% iron edge | 30.0% | About 18.4% | About 66.7 mg | Dried, at the 33.0% iron edge | 33.0% | About 10.2% | About 60.6 mg The loss-on-drying line on the certificate is not automatically a total-water figure. The monohydrate's bound water is part of the crystal, and a loss-on-drying result depends on the test conditions. If total water is the specification, ask for Karl Fischer and state the method. The iron figure is the practical control on the hydrate: it moves as the water moves. Water per dose follows the same split: about 45 mg with the heptahydrate at 20 mg of iron, against roughly 6–12 mg with the dried article. That is the water the capsule, tablet or blend has to tolerate. It is also why the dried article is chosen for a tight fill or a moisture-sensitive matrix, and why the heptahydrate is chosen when water in the crystal is acceptable. ## The iron figure and the dose The iron figures are 20.09% and 30.0–33.0%. The mass per dose is the reciprocal: 20 mg ÷ 0.2009 = 99.6 mg; 20 mg ÷ 0.330 = 60.6 mg; 20 mg ÷ 0.300 = 66.7 mg. At 40 mg the range is 121.2–133.3 mg for the dried article and 199.2 mg for the heptahydrate. A kilogram carries about 201 g of iron as the heptahydrate and 300–330 g as the dried article. These are calculated figures; the batch certificate's iron result takes the place of the theoretical number, and the batch record should say which figure was used. A formula written for 31% iron under-delivers by about 3% if the lot assays 30.0%, and over-delivers by about 6% if the lot assays 33.0% and the formula still weighs for 31%. The window is wide enough that the weigh-up has to use the lot result, not the midpoint. The label declares elemental iron while the order is placed in salt weight. The iron figure is the only bridge between them. ## Fill weight, water activity and the blend For a capsule, the dried article puts 20 mg of iron into about 60.6–66.7 mg of powder; the heptahydrate needs about 97.6–102.6 mg at its catalog window. At 40 mg of iron the difference is about 121–133 mg against about 195–205 mg, enough to change the shell size or the excipient load. In a tablet, the heptahydrate's water becomes part of the granulation: it can be useful in a wet process, unwelcome in a dry one, and it can react with alkaline excipients. The dried article carries less water, but it is still acidic and hygroscopic; it is not an inert filler. In a blend, the share of the formula changes: 20 mg of iron is about 6.1–6.7% of a 1 g stick pack as dried article and about 9.8–10.3% as heptahydrate. That changes flow, segregation and taste. The 80 mesh powder is the standard form; granulation is a separate specification. ## The label names the article The label has to name the article that was weighed. In the EU, the ingredient list carries the iron source and the nutrition declaration shows iron in mg against the 14 mg reference intake. In the US, the Supplement Facts panel shows elemental iron in mg and its share of the 18 mg Daily Value, with the source beside it in the ingredient list. A solid oral supplement that contains iron also carries the required accidental-overdose warning. A label that says only “ferrous sulfate” is ambiguous. The hydrate is part of the ingredient identity, so a switch without a label change would name a different article. The dose declaration also has to match the weigh-up: 20 mg of iron assumes about 60.6–66.7 mg of dried article or about 99.6 mg of heptahydrate. No disease claim is made for either article. The label and any claim are reviewed separately for the destination. ## Choosing between them A solution, a syrup or a process built on a freely soluble crystal points to the heptahydrate. A capsule, a tablet or a dry blend with a tight fill, a high iron dose or a moisture-sensitive matrix points to the dried article. They are separate articles, not interchangeable weights. A formula written for 31% iron and weighed with heptahydrate at the same mass under-delivers iron by about 35%. A label naming the heptahydrate is not met by the dried article. Either direction of switch needs change control, a new specification and a fresh label check. The catalog data are on the dried ferrous sulfate product page; the grades page sets the choice beside the physical forms; the heptahydrate page covers the other article; the compliance page covers the label route; the COA page shows how the iron figure is reported. ### 03 Dried ferrous sulfate stability: moisture, oxidation and the pack URL: https://nutrition.rainwoodbio.com/products/minerals/ferrous-sulfate-dried/stability/ Reviewed: 2026-11-20 Dried ferrous sulfate is hygroscopic and oxidation-prone: ferrous iron turns ferric when moisture and air reach the powder, and the colour moves from gray-white towards yellow-brown. The dried grade carries less water than the heptahydrate, but that does not make it stable in an open pack. The foil, the liner and the storage condition set the shelf life. In one lineThe dried grade removes water from the pack, not the oxidation risk: ferrous iron still turns ferric when moisture and air reach it, and the seal decides how fast. ## Moisture, oxygen and the colour shift The catalog sets loss on drying at ≤1.0%. That is a release limit, not a storage budget. The powder is hygroscopic; once the pouch is open, surface moisture rises, the powder cakes, and ferrous iron begins to oxidise. The colour moves from gray-white towards yellow-brown, and the ferric fraction rises before the total iron result leaves its window. The bound water is different from surface moisture. The monohydrate carries about 10.6% water in the crystal, and the dried article's iron window already reflects that. The storage risk is the water and oxygen that reach the powder after the pack is opened, not the water that was built into the crystal. Heat speeds up both water uptake and the ferrous-to-ferric change; a cool, dry store slows them, and a hot loading bay or a container roof does not slow them. Light is secondary, but an opaque pack is still the safer container. If the pack has been cold, bring it to room temperature before opening so condensation does not settle on the powder. ## The solution: acidic, pale green and short-lived The dried article dissolves in water to give a pale green, acidic solution. The pH of a working solution is usually around 3–4; the acidity keeps ferric iron in solution up to a point. On standing, dissolved oxygen converts ferrous to ferric, the colour moves through yellow to brown, and a basic ferric sulfate sediment can form. A liquid process can hold a few controls: make the solution fresh, sparge or blanket to keep oxygen out, keep the pH acidic, shield the tank from light, and keep alkaline surfaces and ingredients away. A chelating agent keeps ferric iron dissolved; it does not stop the ferrous iron from oxidising. The hold time has to be measured in the actual matrix. The dried article dissolves more slowly than the heptahydrate. Check the dissolution time and any residue in the actual process before writing it into a batch record. ## What moves the powder Factors that move dried ferrous sulfate during storage | Factor | What it does | Control | Moisture | Water uptake turns the surface damp and the powder prone to caking | Sealed pouch; dry store; desiccant if the climate demands it | Oxygen | The ferrous fraction falls as ferric oxyhydroxide forms | Low headspace; sealed pack; process under low oxygen | Heat | Raises the rate of both water uptake and oxidation | Cool store; avoid hot loading bays | Light | Can drive a surface colour change | Opaque or foil pack; dark storage | pH and alkalis | Above pH 4, ferric iron hydrolyses and precipitates | Acidic solution; keep alkaline excipients separate | Metal contact | Trace copper or iron can catalyse oxidation | Glass or stainless contact; avoid copper and brass The factors act together. Warmth, humidity and oxygen combine in a store; a clear tank in sunlight adds light to the same combination. The useful question is not whether the powder is stable in general, but which pack, which condition and which period the data cover. ## Designing the stability study A useful study names the pack, the chamber conditions, the time points and the tests. Use 25 °C/60% relative humidity for long-term storage and 30 °C/65% for the intermediate arm, with 40 °C/75% as the accelerated condition. Add a low-humidity chamber for the hydrate's dry-air behaviour and a light-exposure arm for the surface reaction that a dark incubator cannot show. At each time point, record appearance, ferrous iron by redox titration, total iron by ICP-OES, loss on drying, Karl Fischer water and pH, and run the complexometric assay. Microbiology is tested at release and at the end. The ferric fraction is the difference between total and ferrous iron on one basis, and it usually moves before the total iron leaves its window. Ask for the individual results, not a one-line pass. The report should identify the pack and the lot family; the 1 kg pouch and the 25 kg drum have different headspace and opening histories, so data from one cannot stand for the other. A repacked container needs its own study. ## The formula decides the real risk A capsule or tablet keeps water activity low, yet the shell and the excipients can still move moisture. If an acidic ferrous salt sits beside calcium carbonate, magnesium oxide or sodium bicarbonate, the acid is neutralised and ferric hydroxide can precipitate, with gas or a colour shift as the visible clue. Compatibility work has to include the shell and the moisture-sensitive actives, not only the salt. For a stick pack, the foil and its seal are the barrier. A pinhole admits humid air, and the powder nearest the breach oxidises first, so inspect the strip as well as the powder and set an in-use period after opening. A liquid product combines light, oxygen, pH and heat, and bulk data only begin the assessment. An overage belongs to the label and stability discussion; it cannot repair a leaking pack or undo oxidation. ## Where the shelf life comes from A shelf-life figure for dried ferrous sulfate cannot be separated from the pack and the storage condition. The retest period belongs to a named pack and a named storage condition, and it is supported by that pack's data. A number with no pack, condition or test panel behind it is an assertion, not a shelf life. At the end of the retest period, re-assay the retained sample before extending use. A bulk result does not transfer to a repacked container, so the extension has to rest on the new pack's own data. Pack sizes are listed on the product hub; release tests are set out on the COA page; pack and lead time are covered on the MOQ page; the ICP-OES note explains the total-iron check and the quality page the release workflow. ### 04 Dried ferrous sulfate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/ferrous-sulfate-dried/moq/ Reviewed: 2026-11-20 Dried ferrous sulfate starts at 1 kg in a foil pouch; production runs in a 25 kg fiber drum, and the standard lead time is 1–7 days from confirmation. A firm quotation needs the article and CAS number, the iron and loss-on-drying windows, the quantity and container, the delivery point and Incoterm, the documents, and the market where it will be sold. In one lineOne kilogram is the entry point because a single pouch is the smallest unit that can be tested, retained and traced under one lot code. ## Why the minimum is 1 kg The 1 kg pouch covers a new-lot qualification: identity, iron by titration, loss on drying, ferric iron, microbiology, a bench batch and a retained sample. No smaller split keeps the lot code, the certificate and the retained sample together. Below that size, powder is normally divided out of a larger lot, which adds handling and breaks the link between the sample and the pack. Weight is the unit of sale, so the iron per kilogram depends on the grade: about 310 g in a kilogram of the dried article at 31%, and about 201 g in a kilogram of the heptahydrate at 20.09%. A 5 kg iron requirement is therefore about 16 kg of the dried article or 25 kg of the heptahydrate, before process loss. The 25 kg drum cuts handling per kilogram, but it ties up inventory and lengthens storage. The minimum is about the pack, not about pushing volume. ## Packs and formats Standard dried ferrous sulfate packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture and light barrier; heat-sealed | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Powder, 80 mesh | 1 kg or 25 kg | Capsules, tablets, blends | The standard catalog form | Granulated powder | On request | Flow and dust control | Particle profile changes; separate specification At 1 kg, the foil is the barrier and the seal is where it fails. Folding an opened pouch does not restore a heat seal, and the air inside has already changed. A drum's barrier is its liner: keep it tied, stand the drum on a pallet, and write down the first opening date. The pouch, the liner and the certificate should carry one lot code. The catalog powder passes 80 mesh; granulation is a separate quote. A new mesh, a granulation or a dilution is a new specification, not a packing variant, and a coarser or faster-flowing powder can add sieving time, so raise it before the quote. ## From confirmation to dispatch The 1–7 day window covers picking, documents and handover; transit, customs and the buyer's release sit outside it. A granulated grade, a custom mesh or a special pack carries its own timing. Get a dispatch date, not only the lead time. The drum travels on a pallet and the pouch as a parcel, and the Incoterm says who books freight and clears entry; the documents should travel with the lot. ## What a quotation needs Six details make quotes comparable: - Article. Dried ferrous sulfate, CAS 7720-78-7, with the hydrate named. - Limits. Iron, loss on drying, identification, mesh, heavy metals, microbiology and any ferric limit. - Pack and quantity. Foil pouch (1 kg), fiber drum (25 kg), powder or granulated. - Delivery point and Incoterm. The country, address or port, and the trade term. - Documents. COA, specification, SDS and any destination-specific statement the importer needs. - Intended use and market. Supplement, food or another application, and the country where it will be sold. A quote without the hydrate names a family, not an article: the same family covers a 20% iron hydrate and a 30–33% iron dried powder, and one does not substitute for the other on a label or in a fill. Commercial terms are set out in the quotation, not here. ## What the first pouch qualifies Qualification starts with the 1 kg pouch: check identity, iron, loss on drying and microbiology before scale-up, and add a ferric result if the powder will be stored. Keep material back from that pouch; if the sample, the COA and the quote carry different lot codes, the work is a demonstration, not a qualification. A smaller bench trial needs a separate request: material split from a drum becomes a repack with its own traceability and should be recorded as such. The bench sample and the later production drum may come from different lots. ## Terms to agree before ordering The quotation should set commercial and quality terms side by side: Incoterm, pack, dispatch window, specification revision, a COA per lot, the retained sample, the retest period and the change route. Put those into a quality agreement before the first production order; the conversation is harder after a dispute. A failed lot is settled on the retained sample by a joint re-test on the named method; a photograph of the drum settles nothing. Both documents should name the referee laboratory and say who pays for it. The product hub carries the catalog specification; the COA page sets out the release tests; the compliance page covers the market files; the MOQ glossary explains the term; the logistics page covers freight and documents. ### 05 The regulatory file for dried ferrous sulfate URL: https://nutrition.rainwoodbio.com/products/minerals/ferrous-sulfate-dried/compliance/ Reviewed: 2026-11-20 Dried ferrous sulfate is an iron source, and the regulatory file is built around the article, the destination and the finished product. In the EU, ferrous sulphate is listed among the permitted iron sources for food supplements; in the US, iron is a dietary ingredient and a solid oral supplement carries the iron warning. The buyer's regulatory team confirms the route, the maximum level and the label. In one lineA batch certificate covers the lot; the permitted source, the maximum and the label sit in a separate market file. ## The four parts of the file A complete file carries four strands: the specification revision for the dried article, the lot certificate, the destination's limits and label rules, and a change-control record for source, process and pack. The COA, the TDS and the SDS each describe the material; the market route is a separate decision and is recorded as such. Alongside the certificate, the pack should carry allergen and GMO statements, the manufacturing origin, the process-aid statement and any declaration the customer needs. A missing item is easier to close at quotation than at the port, so name it before the order moves. Version the document list and put it first in the folder. ## European Union For the EU, the starting point is Directive 2002/46/EC on food supplements. Annex II lists the permitted sources of vitamins and minerals, and ferrous sulphate is on that list; the list is amended from time to time, so the current consolidated text is the reference. The dried article is a hydrate of the same salt, and the buyer's regulatory team should confirm that the entry covers the exact hydrate named on the label. The EU regulatory notes collect the framework references. The nutrition declaration shows iron in mg against the 14 mg reference intake. As of this review, the European Food Safety Authority's tolerable upper intake level is 45 mg/day for adults, including pregnant and lactating women, and for adolescents aged 14–18; that is a total-intake reference, not a product limit, and it is not a substitute for a national maximum. As of this review, the EU has not set a harmonised maximum for iron in food supplements, so member states apply their own rules. The destination decides which one applies. ## United States In the US, iron is a dietary ingredient and dried ferrous sulfate is supplied as its source. The Supplement Facts panel declares elemental iron in mg and as a percentage of the 18 mg Daily Value, and the ingredient list names the source. A dietary supplement in solid oral dosage form that contains iron also carries the required accidental-overdose warning under 21 CFR 101.17(e); the warning is part of the label, not an optional claim. A structure/function statement is reviewed on its own, with substantiation and the DSHEA disclaimer. No disease claim is open. For California, the lead result should be checked against the Proposition 65 warning threshold; a lot that meets the catalog limit is not automatically below that threshold. ## Contaminants and limits The table below gives the catalog release limits for the ingredient. They are not a permission for the finished product: the finished-product limit depends on the dose, the daily intake and the destination text. Catalog contaminant limits and what the file should show | Parameter | Catalog limit | What the file should show | Lead (Pb) | ≤3 mg/kg | Lot result, method, and the finished-product calculation | Arsenic (As) | ≤2 mg/kg | Lot result and method | Cadmium (Cd) | ≤1 mg/kg | Lot result plus any category exception that applies | Mercury (Hg) | ≤0.1 mg/kg | Lot result and method A reported “<3 mg/kg” is a method limit, not a measured figure. The file should show the measured result and the detection limit for each element. Convert the lot result to the finished-product dose before comparing it with a finished-product limit; a limit written for the powder and a limit written for the capsule are not the same number. ## Label and claims On the label, the iron source has to appear under the name the market expects, with the elemental iron per serving. In the EU, iron-related claims in the register may be used only under their conditions; in the US, a structure/function statement needs substantiation and the DSHEA disclaimer. In both markets, no disease claim is open, and the brand's reviewer tests the wording against the article, the dose and the market. The certificate speaks for the material, not for the claim; changing a claim does not reopen the specification, and changing the specification does not authorise a claim. This site publishes the specification and makes no health claim for the article. ## Documents the buyer needs The buyer's file needs the COA with iron by titration, loss on drying, the metal panel and the micro count; the specification with the article name, CAS number, iron window and mesh; the TDS and SDS; the allergen statement, which for this inorganic salt should record the absence of declared allergens; the GMO statement; the country of origin; the process-aid statement; and the change-control record. Add the hydrate identity (XRD or Karl Fischer) where the label names the dried article and the certificate does not prove it. The working file begins with the specification and the batch certificate. The buyer adds the market route, the dose and the label review; the supplier holds source, process and pack under change control. The product page carries the catalog specification, and the identity page covers the analytical evidence. ## Checklist before the first order - Specification version, CAS number and the exact hydrate are named. - COA, TDS, SDS, allergen, GMO, origin and process-aid statements are on file. - Each contaminant result is expressed at the finished-product dose. - Label and claim wording has been reviewed for the market. - The national maximum for iron in the destination market has been checked. - Source, process and pack stay under change control. The quality page describes the release file, the MOQ page covers pack and lead time, and the EU regulatory notes provide the framework references. ### 06 How we prove a lot is dried ferrous sulfate URL: https://nutrition.rainwoodbio.com/products/minerals/ferrous-sulfate-dried/identity/ Reviewed: 2026-11-20 A dried ferrous sulfate lot is the named article when the iron titration, the sulfate check and the water figure agree with the specification, and the XRD pattern matches the hydrate reference. Iron alone cannot separate the dried article from the heptahydrate or from a dilution, because both are ferrous sulfate. The sulfate and water results are the second and third dimensions. In one lineThree results have to line up: the iron titration, the sulfate figure and the water or XRD pattern, and each one rules out a different substitution. ## Four questions, four measurements Naming the article on the certificate is a start, not proof. Each layer below answers a different question and needs its own measurement; a supplier who stops at the first has sent paperwork rather than evidence. Four layers of dried ferrous sulfate identity | Layer | Question | Test | What it proves | Document | Is the article named? | Name, CAS number, formula | Paperwork only | Iron | Is the iron ferrous? | Redox titration; total iron by complexometric titration or ICP-OES | The oxidation state and the iron content | Sulfate | Is the counter-ion sulfate? | Gravimetric barium sulfate or ion chromatography | The salt family, not the hydrate | Hydrate | Which hydrate is it? | Water by Karl Fischer plus the iron mass balance; XRD for the pattern | The water of crystallisation A mass-balance check sits across the four: iron plus sulfate plus water plus impurities should close to 100%. A result that leaves a large unexplained fraction points to a filler, a different salt or an analytical error. ## The iron-to-sulfate ratio Ferrous sulfate has one ferrous ion per sulfate ion. The molar ratio is 1:1, and the mass ratio is 55.85 ÷ 96.06 = 0.581. For a powder at 31.0% Fe, the sulfate content is about 53.3% and the water about 15.7%; at 33.0% Fe the sulfate is about 56.8% and the water about 10.2%. Those figures are the hydrate signature, and they move together. A sulfate result that is high relative to iron suggests a sodium sulfate dilution; a sulfate result that is low suggests another iron salt or an iron oxide. Sodium by ICP-OES is the direct check for a sodium sulfate dilution. The same ratio separates ferrous sulfate from ferrous fumarate or ferrous gluconate, because those articles carry an organic counter-ion: sulfate is low or absent and carbon is present. The water-to-iron ratio is the second ratio. The monohydrate has one water per ferrous sulfate; the heptahydrate has seven. A water figure that does not match either pattern, with a normal iron result, is a reason to ask for XRD rather than to accept the certificate. ## X-ray diffraction: the hydrate check X-ray diffraction answers the solid-state question: which crystalline hydrate is present, and does the pattern match a reference? The heptahydrate, the monohydrate and the anhydrous salt have different patterns, and a crystalline article can be distinguished from an amorphous dilution. The method does not measure purity or the counter-ion. A “match” statement needs the reference pattern and the detection limit behind it. Sample preparation matters: grinding can change the pattern of a hydrate, and a damp sample can lose water in the beam. A sheet that says only “XRD conforms”, with neither pattern nor reference, gives the reader nothing to check. XRD is most useful when the hydrate is in dispute, when a source is being qualified, or when a lot behaves differently in a solution or a blend. It is not a routine release test for every lot, and it does not replace the iron and sulfate results. ## What adulteration looks like Common dried ferrous sulfate substitutions and the signals | Adulterant | What it does | Signal | Test | Heptahydrate sold as dried | Raises water, lowers iron per gram | Iron low; water high; wrong XRD pattern | Iron, Karl Fischer, XRD | Ferric oxide or rust | Raises total iron, lowers ferrous iron | Yellow-brown; ferrous/total gap; magnetic or insoluble residue | Redox titration, XRD, solubility | Sodium sulfate | Dilutes iron and adds sulfate and sodium | Sulfate high relative to iron; sodium present | Sulfate, sodium by ICP-OES | Ferrous fumarate or gluconate | Adds iron with an organic counter-ion | Sulfate low; carbon present | Sulfate, FTIR or HPLC, carbon | Water | Lowers iron as-is and raises loss on drying | Iron at the low edge; moisture high | Loss on drying, Karl Fischer Appearance is the least specific evidence. Gray-white to off-white is a wide window, and a yellow-brown cast can be surface oxidation rather than a different article. The iron-to-sulfate ratio, the ferric fraction and the hydrate pattern carry more weight. ## Identity lines for the specification - “Dried ferrous sulfate, CAS 7720-78-7, FeSO4·H2O nominal.” - “Iron 30.0–33.0% by complexometric or redox titration, reported as-is.” - “Loss on drying ≤1.0%, with the test conditions stated.” - “Identification of iron and sulfate; report the reference method.” - “Hydrate identity by Karl Fischer or XRD where the article is disputed.” - “Particle size ≥95% through 80 mesh; heavy metals and microbiology as listed.” - “No added sulfate, iron oxide or organic iron salt; ferric limit to be agreed.” - “Article name, CAS and hydrate on the COA and the label.” ## Five questions to put in writing - Which article is this lot: dried ferrous sulfate, the heptahydrate or the anhydrous salt, and which CAS number is on the certificate? - What is the ferrous iron result by redox titration, and what is the total iron result by complexometric titration or ICP-OES? - What is the sulfate result, and what is the iron-to-sulfate ratio? - What is the water result by Karl Fischer, and does the XRD pattern match the declared hydrate? - If the lot is disputed, will you re-test the retained sample jointly with us? Those five answers, taken together, are the identity file; one iron figure is not. The product hub holds the catalog specification; the COA page tracks each figure back to the certificate; the grades page sets the dried article against the heptahydrate; the XRD method note explains the solid-state check; the quality page covers release. ### 01 What the COA for low-MW hyaluronic acid actually contains URL: https://nutrition.rainwoodbio.com/products/specialty/hyaluronic-acid-low-mw/coa/ Reviewed: 2026-11-20 The certificate for a low-molecular-weight hyaluronic acid lot reports appearance, identification by HPLC and IR, assay by HPLC, molecular weight by SEC-MALS, loss on drying, protein, the heavy-metal panel, microbiology and particle size. Each line needs a method and a release limit, and the molecular-weight window belongs on the same page as the assay, because the two together describe the grade. The ranges below belong to the catalog specification; the batch COA belongs to one pack. In one lineA hyaluronic acid assay without the molecular-weight window and the moisture basis describes a different product from the one ordered. ## The certificate as a line-by-line report A useful certificate lets someone else follow the release decision without calling the supplier. Each line should say what was measured, how it was measured and the limit it was judged against; a bare “conforms” hands the judgement back to the seller. For this grade the identity rows and the chain-length row carry the most weight. The assay says how much hyaluronan is present; the molecular weight says which grade it is. Identity, assay and chain length · low-MW hyaluronic acid | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | HPLC retention and IR spectrum | Conforms to the reference | Assay | HPLC, basis stated | ≥95.0% | Molecular weight | SEC-MALS | 20–80 kDa | Loss on drying | Gravimetric | ≤10.0% | Protein | Colorimetric or UV | ≤0.1% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh ## The assay basis, the water and the chain length The catalog prints ≥95.0% by HPLC but does not say whether that figure belongs to the powder as sold or to the dried solids. The gap matters: with loss on drying allowed up to 10.0%, a lot at 96.0% on the dried basis and 8.0% water reads about 88.3% as sold. The basis belongs in the assay row, not in a footnote, and an as-is figure should not be set against a dried-basis limit. Molecular weight is an average, and the method defines it. SEC-MALS gives a weight-average and a distribution around it; viscometry reports a different average through a Mark–Houwink relationship. The catalog names SEC-MALS and a 20–80 kDa window, so the certificate needs a number and the method beside it. A line that says “low molecular weight” without either has not reported the grade. The window is wide. At a repeat mass near 379 g/mol for the acid form, 20–80 kDa is roughly 50–210 disaccharide units, and a 20 kDa lot and an 80 kDa lot are both in grade while differing four-fold in chain length. The shorter chain also gives a thinner solution at the same concentration, which is the behaviour the formulator is buying. The distribution matters as well as the average: a bimodal lot can report an average inside the window and still behave unlike the grade. ## Release limit versus batch result The limit is the acceptance boundary; the result is what the laboratory found on the lot. They are different pieces of information and need different columns, with the method beside them. A result column that repeats the specification has recorded nothing and will hide drift until a failure. What the result column should contain | Parameter | Release limit | Result column | Assay | ≥95.0% by HPLC | A measured percentage, with the basis and the method | Molecular weight | 20–80 kDa by SEC-MALS | The measured average, the distribution and the method | Loss on drying | ≤10.0% | A measured percentage, and the date of the test | Protein | ≤0.1% | A measured percentage and the method | Heavy metals and microbiology | Per element; counts and absence | Each element in mg/kg; the count and the absence statement “Passes specification” is a verdict, and the page should supply the evidence for it. Metals need a figure for each element rather than one sum; microbiology needs a count and an absence statement for the lot. ## What moves between batches Hydrolysis does not stop when the reactor is emptied. A hot drying step, a long hold at high moisture or a warm warehouse all shorten the chain, and the assay can stay inside 95.0% while the molecular weight falls. That is the most important drift on this product: the certificate can pass and the grade can fail. Read the molecular-weight trend across lots, not one number. Moisture moves with the pack and the season, and it changes the as-is assay without changing the dry matter. Protein and colour move with the fermentation and the purification. Particle size moves with the mill; the 80 mesh line is a finishing specification. Colour is the least quantitative line on the sheet; a shade shift is a reason to look at the record, not a rejection on its own. The same lot code should appear on certificate, pouch, drum and retained sample. If a result sits close to its limit, ask for the raw data and the manufacturing record. ## When to order an outside test An outside laboratory earns its cost on a new source, a first entry into a regulated market, a grade claim the supplier's own certificate does not demonstrate, or a result in dispute. The panel should not simply repeat the COA: ask for SEC-MALS for the molecular weight and distribution, HPLC for the assay on a stated basis, IR against a reference, loss on drying, protein, ICP-MS for the metal panel and microbiology. Each screen should come with its detection limit. “Not detected” without a limit describes the method, not the sample. The chromatogram and the light-scattering data matter as much as the verdict, because identity and chain length are the lines most often reduced to a conclusion. Provenance is part of the result: the portion tested should be the portion retained, and the report should carry the lot. If a result is disputed, send the referee the retained sample, the certificate and the specification, and ask which tests distinguish grade from identity; another run of the same method adds nothing. ## What to compare between suppliers When offers are compared, line up six items: the article and CAS number, the assay with its method and basis, the molecular-weight result and distribution, moisture, protein, and the metal and micro panel. Two quotes can both say 95% and still describe different grades if the molecular-weight method differs. Behind the numbers sits provenance. The certificate should identify the manufacturer and the hydrolysis, drying and milling steps behind the lot. The catalog ranges are on the low-MW product page; the tests that separate grade from dilution are on the identity page; storage behaviour is on the stability page; the assay method is set out in the HPLC note, and release is described on the quality page. ### 02 Low or high molecular weight: choosing a hyaluronic acid grade URL: https://nutrition.rainwoodbio.com/products/specialty/hyaluronic-acid-low-mw/grades/ Reviewed: 2026-11-20 Low-molecular-weight hyaluronic acid is a chain-length grade rather than a different molecule: the 20–80 kDa catalog window sits below the 1.0–1.5 MDa food-grade material, and the two behave differently in water at the same solids. The grade changes the viscosity, the dissolution, the amount of powder that fits a stick or capsule and the grade wording a label can defend. The acid or salt form is a second decision, not part of the grade. In one lineThe grade is a chain length: 20–80 kDa and 1.0–1.5 MDa share the same repeat unit, and the difference appears in viscosity before it appears on the label. ## Why molecular weight is a grade Hyaluronan is a linear polysaccharide built from one repeating disaccharide: D-glucuronic acid and N-acetyl-D-glucosamine, joined in a fixed alternation. The chemistry of the repeat does not change with the chain length. What changes is how many repeats are joined end to end, and with it the hydrodynamic volume the molecule occupies in water. A low-molecular-weight grade is made by controlled hydrolysis or by fermentation and recovery to a shorter chain. The result is the same repeat unit at roughly 50–210 units instead of the thousands found in the high-molecular-weight material. The assay can read the same on both, because it counts the polysaccharide mass, so the molecular-weight line is the only place the grade is visible on a certificate. The catalog keeps the two as separate products for that reason. A buyer who orders “hyaluronic acid” without a band has not specified the powder; a quotation that names only the assay has not quoted the grade. ## The bands side by side Low and high molecular weight hyaluronic acid | Attribute | Low MW (this product) | High MW | Catalog band | 20–80 kDa by SEC-MALS | 1.0–1.5 MDa | Approximate repeats | 50–210 disaccharides | 2,600–4,000 disaccharides | Viscosity at equal solids | Much lower | Much higher | Dissolution | Faster; clears sooner | Slower; tends to lump | Solids load in a drink | Higher before it thickens | Lower | Usual formats | Sticks, drink mixes, capsules | Capsules, tablets, low-solids sticks Neither band is a legal category. Suppliers draw the boundaries in different places, and a number from another source means something only when its method is known. This catalog measures the low band by SEC-MALS; a viscometry value is a different average. ## Viscosity, dissolution and handling Viscosity belongs to a solution, not to a bag of powder. Concentration, temperature, shear rate and the instrument all change the number, so two figures are comparable only when those conditions match. One general statement holds: for the same concentration, the shorter chain gives the thinner solution, and the gap widens as concentration rises. The longer polymer wets slowly, and the outer layer of a lump can gel before water reaches the centre. The shorter chain wets and clears sooner, which is the practical reason it suits a sachet or a glass. Passing 80 mesh improves dispersion, but the sieve does not alter the chain or the thickness of the final solution. Both bands take up water. The low band has more chain ends per gram, so an open pouch in a humid room can cake quickly. The 10.0% loss-on-drying limit is an acceptance test, not a storage allowance; the pack and the dose-room humidity belong in the specification. ## Dose, format and the label Here, dose means the mass of hyaluronic acid stated per serving, not an intake recommendation. A 500 mg serving of a 95.0% powder supplies 475 mg of hyaluronic acid; the balance is water and the residue the specification permits. The grade does not alter that sum, but it changes how much powder the format can hold. A capsule has a fixed fill volume, so flow and bulk density matter more than viscosity there. A stick is a dry blend that the customer dissolves, so the grade controls how quickly it clears and how thick the drink turns. In a ready-to-drink product, clarity joins the same trade: the low band carries more solids before the liquid becomes hard to pour or unpleasant to drink. The label normally names the ingredient rather than the band. If the artwork adds “low molecular weight”, that phrase is a descriptor or a claim and needs the certificate behind it. The market review of that wording is separate from the specification, and no disease claim is available in either case. ## What to write into the specification - “Hyaluronic acid, low molecular weight, CAS 9004-61-9, with the form named.” - “Assay ≥95.0% by HPLC, with the basis stated on the certificate.” - “Molecular weight 20–80 kDa by SEC-MALS; report the average and the distribution.” - “Identification by HPLC retention and IR against a reference.” - “Loss on drying ≤10.0%; protein ≤0.1%; ≥95% through 80 mesh.” - “Heavy metals and microbiology to the listed limits; destination market confirmed before the order.” ## When the low band is the wrong choice If the formula needs thickness at a low mass, the high band does that with less powder. If the product is a small capsule or tablet and the label declares a modest amount, the high band may be the simpler fit. If the market file or the label names the sodium salt rather than the acid, the form question has to be settled before the grade question, because the two names are not interchangeable on a specification. Changing band is a change control, not a substitution. Check viscosity at the intended concentration, the dissolution time, stability in the finished pack and the label wording again. The product hub carries the catalog specification; the level-four comparison takes the viscosity and label questions further; the high-molecular-weight product page is the other side of the range; the stability page covers the storage behaviour; the analytical methods index explains the measurements. ### 02.1 Low MW vs high MW hyaluronic acid: viscosity, dose and the label URL: https://nutrition.rainwoodbio.com/products/specialty/hyaluronic-acid-low-mw/grades/hyaluronic-acid-low-mw-vs-high-mw/ Reviewed: 2026-11-20 Low-molecular-weight hyaluronic acid at 20–80 kDa and high-molecular-weight material at 1.0–1.5 MDa contain the same disaccharide repeat but differ about 25-fold in average chain length. At the same concentration the low grade gives a much thinner solution and disperses faster; the high grade builds thickness with less powder. The choice changes the mass that fits the serving, the process and the grade descriptor the label can support. In one lineThe chain length changes the viscosity at equal solids, the mass that fits the serving and the grade claim the label can defend. ## Two bands, one repeat unit Hyaluronan is built from a repeating disaccharide of D-glucuronic acid and N-acetyl-D-glucosamine. The repeat is the same in both bands; what differs is how many repeats are joined end to end. At a repeat mass near 379 g/mol for the acid form, 20–80 kDa is roughly 50–210 repeats, while 1.0–1.5 MDa is roughly 2,600–4,000. The low band is therefore about one twenty-fifth the length of the high band at the midpoint. Both figures are averages over a distribution, not a single chain. The 20–80 kDa window itself spans four-fold, so a low-MW certificate that gives one number without the distribution has described only part of the grade. The assay cannot separate the bands: it counts the polysaccharide mass, and a 20 kDa lot and an 80 kDa lot can both read 95.0%. The two catalog records also carry different CAS numbers, because the low-molecular-weight article is named as hyaluronic acid while the high-molecular-weight article is the sodium salt. The form and the chain length are separate decisions; a buyer switching grade should confirm both rather than assume the second follows the first. ## Viscosity: why the same solids give a different solution In water the polymer chain occupies a hydrodynamic volume much larger than its mass, and the longer chain occupies more volume per gram. Intrinsic viscosity scales with molecular weight through a power law; for hyaluronan in physiological salt the exponent is roughly 0.5–0.8. With an exponent near 0.65, a 25-fold lower molecular weight gives about an eight-fold lower intrinsic viscosity. That is the reason a low-MW grade can carry more solids before a drink becomes thick, and the reason a high-MW grade can thicken a small stick with very little powder. The practical gap depends on concentration, because solution viscosity rises steeply as concentration increases, and on temperature and shear rate. Without those conditions, two viscosity figures cannot be compared across suppliers or lots. Dissolution follows the same physics. The long chain wets slowly, and the outside of a lump can gel before water reaches the inside. The short chain wets and clears faster, so it suits a sachet or a glass that has to be mixed quickly. Passing 80 mesh helps dispersion in both cases, but the sieve does not alter the chain or the thickness of the final drink. ## Dose: the mass that fits the format The dose on the label is a mass of hyaluronic acid, not a recommended intake. At 95.0% assay, a 500 mg serving supplies 475 mg of the ingredient; water and permitted residue make up the rest. That sum is independent of the band. What the band changes is how much material the format can hold before it stops working. A capsule runs out of volume before it runs out of viscosity, so flow and fill weight matter there. A stick is limited by how fast the powder dissolves and how thick the resulting drink is. A ready-to-drink product faces both limits, and the low band lets the formulator raise solids in the same volume while the high band adds body at a lower mass. If the label declares a large amount in a small volume, the low band is usually the easier fit. If the label declares a modest amount and the product needs body, the high band does more with less. Neither choice is a dose recommendation; the amount is a formulation and label decision. ## The label: name, grade word and claim The ingredient name has to match the article on the certificate. “Hyaluronic acid” and “sodium hyaluronate” are distinct names, and using one for the other creates a mismatch between the artwork and the specification. The grade word is a second layer: “low molecular weight” is a descriptor or a commercial claim rather than part of the legal ingredient name. If the artwork uses the grade word, the certificate must back it with a result and a method, and the claim has to hold for the lot actually sold. At the time of this review the EU register has no authorised claim for hyaluronic acid; in the US, a structure/function statement requires substantiation and the DSHEA disclaimer. A grade descriptor is not a disease claim, but it still must not mislead. The compliance page covers the market checks. ## Switching grade is a change control Changing band is a change control, not a swap. Re-open the specification, the certificate, viscosity at the intended concentration, dissolution time, stability in the finished pack and the label wording. A blend of short and long chains can land on either average while behaving like neither, so the distribution matters as much as the number. The process may change too. A different hydrolysis step is a different process description, and a novel-food conclusion tied to one route does not automatically cover another. The brand's regulatory team should confirm that the destination file still describes the material, and the supplier should record the change in the specification revision. What a grade switch re-opens | Item | What to check | Specification | Band, method, assay basis and moisture limit | Certificate | Molecular-weight result and distribution for the new lot | Solution | Viscosity and dissolution at the intended concentration | Stability | Data in the finished pack, not the bulk pouch alone | Label and file | Ingredient name, grade wording and the market route ## Five questions before choosing a band - What mass per serving does the label declare, and what volume does the format give it? - Is the product limited by thickness, by dissolution or by clarity? - Which molecular-weight band and method does the certificate state, and what is the distribution? - Does the label use a grade word, and is there a result to support it? - Does the market file describe the source, the process and the form on the label? The low-MW product hub carries the catalog specification; the high-MW product page is the other band; the grades page places this comparison in the range; the identity page covers the molecular-weight evidence; the stability page covers the study design. ### 03 Low-MW hyaluronic acid is hygroscopic; moisture and heat decide the shelf life URL: https://nutrition.rainwoodbio.com/products/specialty/hyaluronic-acid-low-mw/stability/ Reviewed: 2026-11-20 Low-molecular-weight hyaluronic acid takes up water from the air and keeps hydrolysing once moisture and heat are present. A sealed barrier pack at a controlled temperature is the only format with a long window; a water-based solution is the format that fails soonest. The 20–80 kDa band is narrow enough that a small loss of chain length pushes a lot out of grade, so the retest period has to come from data on the actual pack. In one lineMoisture and heat shorten the chain, and the 20–80 kDa window, the pack and the solution pH decide how much shelf life the lot has. ## The powder: moisture, caking and chain length The specification caps loss on drying at 10.0%. That is an acceptance limit, not a storage budget. An opened pouch exchanges water with the room, the moisture figure climbs, the assay calculated on the material as sold drops and the powder starts to cake. The seal and the store are as much part of the product as the certificate, even when neither appears on it. The chemical risk is hydrolysis of the glycosidic bonds. Water and heat drive it, and an acid environment accelerates it. A lot stored warm and damp does not simply dilute: its average chain length falls, and the molecular weight can leave the 20–80 kDa window while the assay still reads above 95.0%. That is the failure mode to watch on this grade. Colour is a weaker clue. A cream or tan shift can follow a hot dry, a long hold or trace metal, but it says nothing quantitative about chain length. Store the powder in the original pouch or another opaque, close-fitting container, and bring a cold pack to room temperature before opening it so that water does not condense on the powder. ## The solution: viscosity loss comes first In water the polymer hydrates and the solution becomes clear and viscous. The first sign of degradation is usually a fall in viscosity, before the assay moves, because the assay counts mass while the viscosity follows chain length. A solution that has lost its body has probably lost chain length, even when the certificate line still passes. pH and temperature are the levers that matter. Cleavage of the glycosidic bond speeds up in acid and in heat, and a hot fill or pasteurisation step exposes the polymer to a load the dry powder never meets. An aqueous product also needs a preservative system or another microbial hurdle, because a polysaccharide solution supports growth. Light plays a smaller part, but a transparent bottle left on a bench is still a poor holding container. Data from the bulk powder cannot be carried into a drink. The matrix, the process and the container each shift the rate, so the finished beverage needs its own study at its own pH and heat exposure. ## What drives degradation Factors that move low-MW hyaluronic acid during storage | Factor | What it does | Control | Moisture | Raises loss on drying; enables hydrolysis; caking | Sealed foil pouch; dry store; reseal after opening | Heat | Accelerates hydrolysis and viscosity loss | Controlled warehouse; cool process | pH | Acid conditions speed bond cleavage | Validate the matrix pH; buffer where needed | Microorganisms | Grow in aqueous solutions; spoil clarity and odour | Preservative system; process control; micro tests | Oxygen and radicals | Chain scission in solution | Low headspace; sealed pack; process control | Light | Secondary driver of colour and chain change | Opaque or foil pack; dark store The rows above interact. Heat with moisture is worse than either alone, and a low-pH drink in a clear bottle stacks several of them at once. The question to ask is not whether the ingredient is stable, but for how long, in which pack, under which condition. ## A stability protocol for the ingredient The protocol should name the pack, the condition, the sampling points and the test panel. Warehouse coverage uses 25 °C/60% and 30 °C/65% relative humidity; 40 °C/75% is the stress arm. Add a solution arm at the intended pH, because the powder data cannot describe a liquid. At every point measure assay, moisture, molecular weight by SEC-MALS, viscosity at a fixed concentration and shear, appearance and micro. A stick or a drink is tested in its matrix, under the process pH and heat exposure. The report should list every result rather than one verdict, and name the pack and the lot. Request the summary for the exact pack on the order. Headspace, surface area and the way a pack is opened differ between a pouch and a drum, and the study has to match the container the customer will store. ## The finished formula changes the answer A capsule or tablet has low water activity at the start, but the shell and the excipients can still pass moisture into the fill; moisture and molecular weight are therefore tested at release and again on storage. For a stick, the seal is the likely failure point: one pinhole in the laminate is enough, so the strip is checked as well as the powder. A drink adds pH, heat and microbial risk to the picture. Bulk data is where the study starts, not where it ends. Whether to add an overage is a formulation and labelling choice; it cannot compensate for a container that admits water. ## How the shelf life is set No single shelf-life figure is published for this grade, because the container and the storage condition define it. The retest period on the specification is backed by a stability file for that exact pack. A number offered without a container, a storage condition and a defined test panel does not define a shelf life. Once the retest period ends, the retained sample is re-tested before any extension. Extension is not assumed, and a bulk number is not carried over to a repack. Pack sizes are on the product hub; release testing is on the COA page; pack and lead time are on the MOQ page; the methods index explains the measurements; the quality page describes how a lot is released. ### 04 Low-MW hyaluronic acid: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/specialty/hyaluronic-acid-low-mw/moq/ Reviewed: 2026-11-20 Low-molecular-weight hyaluronic acid is supplied from a 1 kg foil pouch, and that pouch is also the minimum order; production runs use a 25 kg fiber drum. The standard pack is quoted at 1–7 days. A firm quotation needs the grade band, the assay basis, the quantity and pack, the destination and Incoterm, the documents and the end market. In one lineA kilogram is enough to sample, test and trace one lot; the 25 kg drum is the production unit. ## Why the minimum is 1 kg One kilogram supports a bench trial, a retained sample and an outside check, with enough left for a repeat. It moves as a parcel, so a formulator can start before the production plan is fixed. The pouch carries its own lot code and certificate, which keeps the trial material and the file aligned. Smaller quantities come from splitting a bulk lot. The repack adds a container and a handling step, and the link to the original lot becomes weaker; the chemistry does not change. A drum cuts handling per kilogram but ties up inventory and lengthens storage, so the minimum is a packaging decision rather than a volume target. ## Packs and particle size Standard low-MW hyaluronic acid packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Liner inside; code on drum and liner | Granulated powder | On request | Flow and dust control | Sieve profile changes | Custom split | On request | Small trial | Handling record and traceability check The standard material passes 80 mesh at 95% or better. A granulated version is a separate specification, not a different bag; if the process needs a coarser or more free-flowing powder, raise it before the quote, because the sieving line and the schedule both change. ## Lead time and dispatch Quotations for the standard pack run 1–7 days after confirmation. Picking, paperwork and handover to the carrier sit inside that window; transit, customs and the buyer's own release do not. A custom granulation or a non-standard pack takes longer, and the extra time is quoted separately. Get a dispatch date rather than a range. The pouch usually travels as a parcel and the drum as a pallet, and the Incoterm assigns the freight booking and the entry clearance. Certificates and lot documents belong in the same shipment as the material. ## What a quotation needs A comparable quotation states six things: - The article. Hyaluronic acid, low molecular weight, CAS 9004-61-9, with the 20–80 kDa band. - The specification. Assay basis, moisture, protein and sieve limits, plus the metal and micro panel. - The pack. The pouch, the drum, or a granulated or split option. - The destination. Country, delivery point and Incoterm. - The documents. Batch COA, specification, safety data sheet and the declarations the importer requires. - The use and market. Whether the destination is a supplement or a food, and where it will be sold. The grade band and the destination are not optional details; a powder that fits one market can fall outside the file in another, and the declarations are part of what is being sold. Terms are quoted per order, not printed here. ## The sample is a lot, not a demonstration Use the pouch as the qualification unit. Before scaling, check identity, assay, molecular weight, moisture and microbiology, and retain a portion from the same pack. The lot code should be identical on the pouch, the certificate and the quotation; without that link the material is a demonstration, not a qualified lot. Any trial below a kilogram comes from a split, so it is not the catalog pouch. The split leaves its bulk lot, acquires its own handling record and cannot be described as a 1 kg foil pack. Put the split in writing and file its lot code with the results. ## Terms to settle before the first order Commercial terms, pack and schedule belong on the same page as the quality commitments: Incoterm, specification revision, a certificate per lot, the retained sample, the retest period and the change route. A quality agreement settled before the first order is easier than the same conversation after a disagreement. When a lot fails the agreed limits, the evidence is the retained sample and a joint test using the named method; a picture of the drum is not evidence. The agreement should name the referee laboratory, allocate its cost and fix the method before the dispute exists. A return based on colour alone is difficult to defend for either party. The product page carries the catalog specification. Release lines are on the COA page; the molecular-weight bands are compared on the grades page; the MOQ glossary entry defines the term; the logistics page covers freight and documents. ### 05 The regulatory file for low-MW hyaluronic acid URL: https://nutrition.rainwoodbio.com/products/specialty/hyaluronic-acid-low-mw/compliance/ Reviewed: 2026-11-20 Low-molecular-weight hyaluronic acid can be sold as a supplement ingredient, but no single document makes that lawful. The source and the hydrolysis step behind the grade, the novel-food position, the contaminant ceilings, the label name and the claim are separate checks, and the buyer's regulatory team confirms the route for the destination. This page lists what belongs in the file; it is a sourcing reference, not legal advice. In one lineThe specification describes the powder; the file has to show the source, the grade, the market route and the label for the destination. ## Four checks, one file These questions do not collapse into one another. A lot can pass a metals limit and still carry wording the market forbids, and the same powder can be lawful in one country and not in another when the source or the process history changes. The company that places the supplement on the market carries the assessment; a certificate supports it but cannot replace it. The grade adds a fifth item: the hydrolysis step that produces the 20–80 kDa band is part of the process description, and a regulatory conclusion tied to a different process does not automatically cover it. Record the step, the source and the molecular-weight method in the specification, then check the destination file against that description rather than against the product name alone. ## European Union Food supplements in the EU sit under Directive 2002/46/EC, which harmonises the category and lists the vitamins and minerals, with their permitted forms, in Annex II. Hyaluronic acid is outside that list, so the annex does not cover it; the ingredient is governed by general food law and the supplement labelling rules, and the operator still has to establish that the use is safe and lawful. The novel-food position depends on how the material is made. As of this review, a 2023 Article 4 consultation under Regulation (EU) 2015/2283 found that sodium hyaluronate from fermentation with a non-genetically modified Streptococcus equi subsp. zooepidemicus strain is not a novel food when used in food supplements. The finding is tied to the process and use described; a hydrolysed low-molecular-weight grade made by a different step, a tissue-derived material, or the acid form rather than the salt needs its own review. The catalog article is named as hyaluronic acid, so the file should say which form the finding covers before anyone relies on it. Rooster comb extract follows a separate authorisation under Commission Implementing Decision 2013/705/EU, with a 60–80% hyaluronic acid specification. Regulation (EU) 2023/915 sets the contaminant ceilings: for food supplements, lead 3.0 mg/kg, cadmium 1.0 mg/kg and mercury 0.10 mg/kg. Arsenic has no harmonised EU maximum, so the buyer sets that limit. Labelling falls under Regulation (EU) No 1169/2011 and claims under Regulation (EC) No 1924/2006. Great Britain keeps a separate novel-food register and labelling regime, while Northern Ireland stays inside the EU rules, so the delivery address decides which file is in play. ## United States On the US side the framework is DSHEA. FDA does not license a supplement or its ingredients before sale, but manufacturing must follow the dietary supplement cGMP in 21 CFR 111, the label needs a Supplement Facts panel and adverse events must be reported. The file should hold an NDI notification or another documented basis for the ingredient. One question needs its own memo: the drug exclusion. Hyaluronic acid has a history as an approved drug, and an article first approved in that category is outside the dietary ingredient definition unless it was sold as a supplement before the approval. The brand's team should record the basis it uses. A structure/function statement is permitted when it is truthful, substantiated and carries the DSHEA disclaimer; naming a disease turns it into a drug claim. ## Contaminants and grade limits Metals are judged in the finished product, not only in the drum. The table is a starting point for a supplement file; the destination text and the daily dose settle the final figure. Assay and molecular weight are specification limits rather than regulatory ceilings, but they are what defines the grade in the file. Limits to confirm for a low-MW hyaluronic acid file | Parameter | Catalog limit | EU supplement ceiling | What the file should show | Lead (Pb) | ≤3 mg/kg | 3.0 mg/kg | Lot result, method and finished-product calculation | Cadmium (Cd) | ≤1 mg/kg | 1.0 mg/kg | Lot result and any category exception | Mercury (Hg) | ≤0.1 mg/kg | 0.10 mg/kg | Lot result and method | Arsenic (As) | ≤2 mg/kg | No harmonised limit | Agreed limit and method, stated on the certificate | Assay and grade | ≥95.0%; 20–80 kDa | Not a regulatory limit | Result, basis, method and the label claim the number supports | Moisture and protein | ≤10.0%; ≤0.1% | Not a regulatory limit | Results that support the stability and purity story ## Label and claims On the label, the ingredient has to be named as the article that was bought. “Hyaluronic acid” and “sodium hyaluronate” are different names, and a label that uses the salt name for the acid article, or the reverse, has a mismatch between the specification and the artwork. The grade wording is a second layer: “low molecular weight” is a descriptor or a commercial claim, and it needs the molecular-weight result and method behind it. At the time of this review the EU register contains no authorised claim for hyaluronic acid, so only claims on the applicable register are available; a grade descriptor is not a health claim, but it must not mislead. A US structure/function statement needs substantiation and the DSHEA disclaimer. Neither market permits a disease claim, and this page makes no health claim. ## Documents for the file Documents a low-MW hyaluronic acid file should contain | Document | What it shows | When it is needed | Batch COA | Assay, molecular weight, moisture, protein, contaminants and micro | Every lot | Specification and TDS | Ranges, methods and the grade band | Every supplier qualification | Source and process statement | Fermentation or tissue route; hydrolysis step; production organism | Every lot, all markets | Novel-food determination | The Article 4 conclusion or authorisation for that route | EU and NI files; GB register check | Contaminant and micro results | Individual element figures and counts | Every lot | Label and claim file | Ingredient name, amount, grade wording and claim support | Before the first print run | GMP or HACCP certificate | The control system behind the plant | Before approval; at audit ## Checklist before the first order - The grade band, the form and the CAS number are named on the specification and the certificate. - The hydrolysis step and the source route are recorded, and the novel-food position is checked against them. - Each metal result is read against the destination ceiling rather than a “conforms” stamp. - The label name matches the article and the market file; the grade wording has a result behind it. - The claim wording has been reviewed for the destination, and no disease claim is present. - Quotation, specification and certificate all name the same revision. The market notes are on the EU and US regulatory pages. The COA page explains the batch lines; identity and grade evidence are on the identity page; the catalog specification is on the product page. The quality page describes the release file. ### 06 How we prove a low-MW hyaluronic acid lot is hyaluronan URL: https://nutrition.rainwoodbio.com/products/specialty/hyaluronic-acid-low-mw/identity/ Reviewed: 2026-11-20 A low-MW hyaluronic acid lot is the named material when five lines agree: the document names the form, the CAS number and the grade band; the HPLC assay is reported on a stated basis; the IR spectrum matches a reference; SEC-MALS returns a molecular weight inside 20–80 kDa; and the mass balance closes with moisture and protein. The ≥95.0% assay alone cannot show chain length or catch a dilution. The grade has to be measured, not inferred from viscosity. In one lineIdentity is five agreeing measurements: the named form, the HPLC assay, the IR fingerprint, the 20–80 kDa window and a mass balance that closes. ## The five identity layers No single test carries the conclusion. A correct document can sit beside a diluted powder, an assay can pass on a chain of the wrong length, and a molecular weight inside the band does not rule out another glycosaminoglycan. The layers fail in different ways, so the file is complete only when all five agree. Five identity layers for low-MW hyaluronic acid | Layer | Question | Evidence | What it proves | Document | Is the form, CAS and grade named? | Name, CAS number, 20–80 kDa band | Paperwork only | Assay | How much hyaluronan is present? | HPLC against a standard, on a stated basis | Mass of the polysaccharide | Spectrum | Is the polymer hyaluronan? | IR against a reference | The functional groups | Chain length | Is it the low band? | SEC-MALS average and distribution | The grade | Mass balance | Is it diluted? | Assay, loss on drying, protein | Consistency of the numbers ## The disaccharide ratio and the distribution Hyaluronan is a linear chain of one repeating disaccharide: D-glucuronic acid joined to N-acetyl-D-glucosamine in a 1:1 molar ratio. In the acid form the repeat unit has a formula mass near 379 g/mol; the glucuronic acid residue contributes about 176 g, or 46.4% by mass, and the N-acetylglucosamine residue about 203 g, or 53.6%. A glucuronic acid result close to that proportion supports the polysaccharide; a figure well below it points to dilution or to a different polymer. For the sodium salt the repeat is about 401 g/mol and the glucuronic acid share falls to about 43.9%, which is why the form has to be named before the ratio is read. The ratio only means something when both figures share a basis. If the assay is on the dried solids and the glucuronic acid is on the powder as sold, the two cannot be divided by each other until the moisture is reconciled. The catalog does not print a glucuronic acid limit, so this is a supplementary identity test rather than a release line; it is most useful when a lot is disputed or a new source is being qualified. The second ratio is the molecular-weight distribution. An average inside 20–80 kDa can hide a broad or bimodal distribution, and a blend of a short and a long chain can report the right average while behaving unlike the grade. Ask for the weight-average, the number-average and the shape of the distribution, not only the single figure that meets the window. ## X-ray diffraction: what it cannot show An amorphous polymer does not give a useful diffraction fingerprint, so XRD cannot establish that a powder is hyaluronan. The pattern is a broad halo with no sharp reflections, which confirms only that the solid is non-crystalline. A claim that it “matches the reference” adds little unless the pattern and the reference are attached. The test still has a narrow use. A crystalline diluent such as a sugar or sodium chloride can produce sharp reflections above its detection limit, so a pattern that is not a pure halo is a reason to look at the formulation and the batch record. Ask for the detection limit before reading a clean halo as proof of purity; the method sees crystalline phases, not the chain length or the protein. The XRD method note sets out the limit. ## What adulteration looks like Common low-MW hyaluronic acid substitutions and the signals | Route | What it does | Signal | Test | Maltodextrin or dextrin | Adds mass; lowers assay; raises moisture | Assay low; IR differs; LOD high | HPLC, IR, loss on drying | Another glycosaminoglycan | Shares the uronic acid building block | IR and HPLC profile differ; protein may move | IR, HPLC, protein, molecular weight | High-MW material sold as low | Average outside the band or bimodal | SEC-MALS average high; solution too thick | SEC-MALS distribution | Added water | Lowers the as-is assay; caking | LOD high; dry-basis assay normal | Loss on drying | Form substitution | Salt sold as acid, or the reverse | Name and CAS mismatch; IR carboxylate region shifts | IR, pH, sodium by ICP-OES Each route leaves more than one mark, and no single test catches all of them. The workable screen combines the document, the assay on a stated basis, IR, SEC-MALS, moisture and protein, all run on one submitted sample that carries the lot code. ## How to write the identity into the specification - “Hyaluronic acid, low molecular weight, CAS 9004-61-9, with the form named.” - “Assay ≥95.0% by HPLC, with the basis printed on the certificate.” - “Identification by HPLC retention and IR against a reference; report the spectrum.” - “Molecular weight 20–80 kDa by SEC-MALS; report the average and the distribution.” - “Loss on drying ≤10.0%; protein ≤0.1%; ≥95% through 80 mesh.” - “No diluent or other glycosaminoglycan above the agreed limit.” - “Source, hydrolysis step and destination market confirmed before the order.” ## Five questions for the supplier - Which form and CAS number are on the certificate, and does the label use the same name? - Is the 95.0% assay on the powder as sold or on the dried solids, and what is the loss on drying for this lot? - Can you send the IR spectrum and the HPLC chromatogram, not only the conformity statement? - What are the weight-average and number-average molecular weight by SEC-MALS, and what does the distribution look like? - In a dispute, will you test the retained sample jointly with our laboratory? Answered directly, these five points make an identity file; one assay figure does not. The product hub carries the catalog ranges; the COA page shows where each number sits on the certificate; the grades page compares the bands; the FTIR method note explains the spectrum; the quality page describes the release file. ### 01 What the COA for marine collagen actually contains URL: https://nutrition.rainwoodbio.com/products/protein-collagen/marine-collagen/coa/ Reviewed: 2026-11-20 The certificate for a marine collagen lot reports protein by Kjeldahl with the 5.55 factor, peptide content and molecular weight by SEC, loss on drying, ash, the heavy-metal panel, microbiology and particle size. The source line should name fish skin and, where the buyer needs it, the species. The limits below are catalog values; the batch certificate is the document that proves a specific pack. In one lineThe protein figure only becomes comparable when the certificate prints the Kjeldahl factor, the assay basis, the SEC peptide distribution and the fish source beside it. ## The certificate as a test report A marine collagen certificate is readable when each line carries a parameter, a method and a release limit, and when the measured result sits in its own column. The table is the catalog specification for this grade, not a lot result; the measured values belong on the certificate that travels with the drum and the retained sample. Release parameters · marine collagen, catalog specification | Parameter | Method | Release limit | Protein | Kjeldahl, N × 5.55 | ≥90.0% | Peptide content | SEC-HPLC | ≥80.0% | Molecular weight | SEC-HPLC | ≥80% below 3,000 Da | Loss on drying | Gravimetric | ≤7.0% | Ash | Gravimetric, furnace | ≤5.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh Appearance belongs on the same sheet: off-white to pale yellow, free-flowing powder. Colour is not a quantitative test, but it moves with the raw material and the dryer. ## The factor, the basis and the two SEC figures Kjeldahl measures nitrogen, not protein. The titration becomes a protein figure only after multiplication, and collagen uses N × 5.55 because the protein carries close to 18% nitrogen. A general food protein uses 6.25, which assumes 16%. Because 6.25 is about 12.6% larger than 5.55, the same nitrogen result reads 90.0% with one factor and roughly 101% with the other. The powder did not become richer; the convention changed. The basis is the second half of the same question. The catalog sets protein at ≥90.0%, and the certificate should print whether the result is on the as-is or the dry basis. At the 7.0% moisture limit, 90.0% on the dry basis corresponds to about 83.7% as-is. A formulator who weighs the powder needs the as-is figure. Peptide content and molecular weight are both SEC-HPLC results, but they answer different questions. Peptide content is the share of the powder that elutes as peptide rather than as free amino acid or non-peptide material. The molecular-weight line says how much of that peptide sits below 3,000 Da. A lot can pass the first gate and still carry a high-molecular-weight tail, so the certificate should report the distribution bins, not only the cut-off. The certificate should also report the source in words. CAS 9007-34-5 is the generic collagen number and does not name fish, let alone the species, so the written source line is the only place the claim can be checked. The identity page sets out how the collagen, peptide and species claims are supported. ## Release limit versus lot result The release limit is the gate; the lot result is the reading. They belong in separate columns, each next to its method, and a result column filled with the catalogue range is a copy of the gate rather than a measurement. Reading the result column · release limit against lot result | Parameter | Release limit | Result column | Protein | ≥90.0% | A measured percentage with the factor and the basis | Peptide content | ≥80.0% | A measured percentage by SEC-HPLC | Molecular weight | ≥80% below 3,000 Da | The measured fraction below 3,000 Da and the bins | Loss on drying | ≤7.0% | A measured percentage | Ash | ≤5.0% | A measured percentage | Particle size | ≥95% through 80 mesh | The measured percentage through the sieve A tick in a “conforms” column is the end of a chain of evidence, not the evidence itself. Microbiology needs a count and an absence statement; the metal panel needs a number for each element. A single total for the metals says nothing about which one is close to its limit. ## What moves between lots Fish skin is a seasonal raw material. The species mix, the chilling and the time before processing move the collagen and the lipid load; hydrolysis time, temperature and enzyme dose move the peptide distribution; the dryer and the mill move moisture, colour and mesh. Ash moves with the raw material and with the washing steps, and a lot at 4.5% ash is not the same powder in a clear drink as a lot at 1.5%, even when both sit inside the 5.0% limit. Odour is hard to put on a certificate and often the most informative line. A marine note is expected in this material, and it can strengthen with moisture, heat or residual lipid. A lot can pass every number and still smell unlike the previous drum, so keep a retained sample and a sensory note. Mesh is a finishing variable: a new mill or a new sieve can move the 80 mesh result without touching the chemistry, and the flow, the dust and the wetting change with it. A trend across lots matters more than one result near an edge. ## When to order an outside test An outside laboratory earns its place when the source is new, when the first commercial lot enters a regulated market, when a species claim is not proven by the certificate, or when a result is disputed. Do not repeat the whole certificate. The panel that closes the question is hydroxyproline and the amino acid profile for collagen, SEC for the peptide distribution, a species-specific PCR or a documented species chain for the fish claim, ICP-MS for the metals, and loss on drying and microbiology on the same sample. Every screen should come with its detection limit. A “not detected” entry without one describes how far the method can see, not what the sample contains. For a species test, the sample should be the powder as shipped rather than the raw tissue, unless the raw material is the question. Keep the chain intact: the material that was tested should be the material that was kept, and the lot code should appear on the report. If a result is challenged, the referee needs the kept sample, the specification and the supplier's certificate. ## What to compare between suppliers Six rows make a supplier comparison: source and species; protein with factor and basis; peptide content and distribution; moisture and ash; mesh and appearance; allergen statement and country of origin. Two quotations that agree on the protein percentage and disagree on the other five are not quoting the same powder. The second layer is traceability: the plant, the raw batch, the hydrolysis and drying record, and the retained sample. The catalog specification sits on the marine collagen product page. The fish collagen peptides page shows the neighbouring grade with a tighter peptide gate; the methods library covers the analytical techniques; the quality page describes the release file and the retained sample. ### 02 Marine collagen grades: peptide fraction, mesh and ash URL: https://nutrition.rainwoodbio.com/products/protein-collagen/marine-collagen/grades/ Reviewed: 2026-11-20 Marine collagen is sold here as one catalog grade: a fish-skin, type I hydrolysate at ≥90.0% protein, ≥80.0% peptide and at least 80% of the peptide below 3,000 Da, milled to 80 mesh. The levers a buyer can agree on are the peptide distribution, the mesh and the granulation, the ash limit and the colour. A change in any of those is a specification change, not a packing note. In one lineThe grade of a marine collagen is set by its peptide distribution, its mesh and its ash limit; the word marine describes the source, not the grade. ## Why marine collagen is not a grade name Marine collagen is a source name. It says the collagen came from a marine animal; it does not say which species, which tissue, how far the protein was hydrolysed or how the powder was milled. CAS 9007-34-5 is the generic collagen number and says even less: it is the same number for fish skin, fish scale and bovine hide. Two drums can both be called marine collagen and differ in peptide size, ash, colour and mesh, and those differences decide the dosage form and the label. The grade is therefore written as release gates, not adjectives. Protein, peptide content, molecular weight, moisture, ash, mesh and the source line are the specification. A quotation that names the product but not those gates has not described a grade. ## The catalog grade beside the fish collagen grade The nearest comparison in this range is the fish collagen peptides product, which is also a fish-skin type I hydrolysate but carries a different set of gates. The two are separate products, not two settings on one specification. Marine collagen and fish collagen peptides · specification, not name | Attribute | Marine collagen | Fish collagen peptides | Source | Fish skin, type I | Fish skin, type I | Protein | ≥90.0%, Kjeldahl N × 5.55 | ≥90.0%, Kjeldahl N × 5.55 | Peptide content | ≥80.0% by SEC-HPLC | — | Molecular weight | ≥80% below 3,000 Da | ≥90% below 3,000 Da | Hydroxyproline | — | 8.0–12.0% by HPLC | Ash | ≤5.0% | ≤2.0% | Particle size | ≥95% through 80 mesh | ≥95% through 40 mesh | Appearance | Off-white to pale yellow | White to off-white | Finish | Powder; granulated on request | Spray-dried; agglomerated on request The table is not a ranking. The marine grade has the broader peptide gate and the finer mesh; the fish grade has the tighter peptide gate, a hydroxyproline range and a coarser spray-dried powder. Which one fits depends on the label claim and the dosage form, not on the word in front of the product name. ## What changes inside the drum Mesh is the first physical difference. An 80 mesh powder is finer than a 40 mesh one: it wets faster, disperses more evenly in a stick pack and blends into a capsule fill without a coarse tail. It also makes more dust and usually packs at a lower bulk density, and it can clump when it is poured into water too quickly. The fix is a dispersion step or a granulated grade, not a larger scoop. Granulation is the counter-lever. A granulated marine collagen flows better, dusts less and fills a capsule more evenly, but it dissolves more slowly and can leave a grit if the granule is coarse. The chemistry is unchanged; the packing behaviour and the wetting time are not. Ash is the mineral residue. The marine limit of ≤5.0% is wider than the fish grade's ≤2.0%. A lot close to 5.0% carries more mineral load, and in a clear drink that can show up as haze, a salt note or a small pH shift. Colour runs from off-white to pale yellow; a deeper yellow can follow the raw material, the wash or the dryer rather than the protein. Odour belongs to the physical profile too. A marine note is normal in fish-skin collagen, and it can be stronger in a lot that carries more residual lipid. It is not a release number, but it is a reason to run a bench trial in the real matrix before the formula is fixed. ## Matching the grade to the dosage form In a capsule or a tablet, the 80 mesh powder blends well and the granulated form controls dust and fill weight. In a sachet or a beverage powder, the fine powder disperses quickly, and the marine note and the ash level matter more than the protein percentage. In a clear beverage, haze and pH decide the fit; a lot close to the ash limit needs a lab trial at the target pH before the formula is fixed. In a gummy or a chew, the powder competes with the matrix for water. A finer, more hygroscopic lot can change the texture and the drying time, so the trial should use the mesh that will actually ship. The source name answers none of these questions; the specification and a trial with the shipping lot do. The dosage form also sets the label. A capsule can carry a small fill weight, a stick pack can carry several grams, and a beverage has to keep the powder in solution. The peptide distribution and the ash limit decide how much the form can take before the texture or the clarity fails. ## What to write into the specification - “Hydrolysed marine collagen, type I, fish skin; species named on the certificate.” - “Protein ≥90.0% by Kjeldahl with N × 5.55; factor and basis printed.” - “Peptide content ≥80.0% and ≥80% below 3,000 Da by SEC-HPLC; distribution reported.” - “Loss on drying ≤7.0%; ash ≤5.0%.” - “Appearance off-white to pale yellow; ≥95% through 80 mesh; granulated on request.” - “Heavy metals and microbiology as listed; fish allergen statement.” - “Destination market and label wording agreed before the order.” That list is short enough to print on a specification and specific enough for a laboratory to test against. A specification that names only “marine collagen” leaves the source, the peptide size and the mesh open, which is where most substitution and most disputes begin. ## When this grade is the wrong choice If the label says fish collagen peptides and the specification needs a hydroxyproline range, a tighter peptide gate and a 40 mesh spray-dried powder, the marine grade is the wrong SKU. If the source is not fish, neither grade applies, and the allergen and label position change with the species. The comparison between the two fish-derived products is set out on marine collagen versus fish collagen. The catalog ranges sit on the marine collagen product page; the neighbouring grade is on the fish collagen peptides page; the certificate lines are explained on the COA page. ### 02.1 Marine collagen vs fish collagen: the source, the species and the label URL: https://nutrition.rainwoodbio.com/products/protein-collagen/marine-collagen/grades/marine-collagen-vs-fish-collagen/ Reviewed: 2026-11-20 Marine collagen and fish collagen are not two species. Marine names the habitat; fish names the animal. In this catalog both are fish-skin, type I hydrolysates, but they are separate specifications: the marine grade at ≥80% peptide and ≥80% below 3,000 Da, milled to 80 mesh, and the fish grade at ≥90% below 3,000 Da with 8–12% hydroxyproline, milled to 40 mesh. Both must declare fish on the label where fish is a listed allergen. In one lineMarine names a habitat and fish names an animal; only the specification and the allergen declaration tell you what is in the drum. ## Two names, two kinds of claim “Marine collagen” is a source claim. It says the collagen came from a marine animal, which in practice means fish, but the word itself does not name the species, the tissue or the process. “Fish collagen” is an animal claim: it names the class of animal, not the species. Neither name is a grade, and neither is an identity test. The trade names overlap in the market. A buyer can order “marine collagen” and receive fish skin, fish scale or a blend, and a certificate can carry the right protein figure without naming the source at all. CAS 9007-34-5 makes that easier, because it is the generic collagen number and is identical for fish skin, fish scale and bovine hide. The written source line on the specification is what stops the name from standing in for the material. In this catalog the source is stated: fish skin, type I. That is a narrower statement than “marine”, and it is the one the certificate and the label should repeat. ## The source and the specification The two products come from the same tissue and the same collagen type, so the difference is not the animal. It is the set of release gates built around the hydrolysate, and those gates decide which powder fits which dosage form. Marine collagen and fish collagen peptides · catalog specifications | Attribute | Marine collagen | Fish collagen peptides | Source | Fish skin, type I | Fish skin, type I | Protein | ≥90.0%, Kjeldahl N × 5.55 | ≥90.0%, Kjeldahl N × 5.55 | Peptide content | ≥80.0% by SEC-HPLC | — | Molecular weight | ≥80% below 3,000 Da | ≥90% below 3,000 Da | Hydroxyproline | — | 8.0–12.0% by HPLC | Ash | ≤5.0% | ≤2.0% | Particle size | ≥95% through 80 mesh | ≥95% through 40 mesh | Appearance | Off-white to pale yellow | White to off-white | Finish | Powder; granulated on request | Spray-dried; agglomerated on request The marine grade has the broader peptide gate and the finer mesh. The fish grade has the tighter peptide gate, a hydroxyproline range and a coarser spray-dried powder. Those are manufacturing and release decisions, not marketing labels, and a switch between them is a specification change. ## The species is a third question Neither catalog name identifies a species. “Marine” does not, and “fish” does not either: cod, tilapia, salmon and a mixed filleting stream are all fish. The species belongs in the supplier file, on the COA where the buyer asks for it, and in the traceability record behind the lot. A species name printed on a pack needs that record behind it. The analytical route is a species-specific PCR, run on the raw tissue or on a validated method for the powder, supported by a documented species chain. The document route is the landing or harvest record, the process record and the lot traceability. Neither route is burdensome at the scale of a commercial lot. ## Choosing between the two specifications Choose the marine grade when the dosage form wants an 80 mesh powder and the formula can accept a broader peptide distribution. A capsule, a tablet or a stick pack usually can. The finer powder wets and disperses quickly, and the ash limit of ≤5.0% is workable in a flavoured or coloured matrix where a little haze is not visible. Choose the fish grade when the specification needs a hydroxyproline range, a tighter peptide distribution and a 40 mesh spray-dried powder with ash ≤2.0%. That combination is the easier starting point for a clear beverage, where haze and mineral load are visible, and for a label that names fish collagen peptides rather than marine collagen. Do not choose on the name. The two products are not interchangeable without a specification review, a label review and a written change control. A switch changes the mesh, the peptide gate, the ash limit and possibly the species file. ## The fish allergen does not change with the name Fish is a major food allergen in the European Union under Annex II of Regulation (EU) No 1169/2011, in the United States under the Food Allergen Labeling and Consumer Protection Act, and on the UK 14-allergen list. Both products are fish-derived, so both carry the duty. The word “marine” does not soften it, and a front-of-pack claim of marine collagen does not replace the declaration. The declaration belongs in the ingredient list, emphasised as the market requires, or in a “contains” statement where that format is allowed. The statement for this material is direct: contains fish. A consumer with a fish allergy should avoid the finished product, and the pack should make the source unmistakable. Fish are not a TSE-relevant species, so the file does not need the TSE/BSE dossier that a bovine collagen requires. ## What the label has to say The ingredient list should name the material in words a consumer can recognise: hydrolysed fish collagen, fish collagen peptides, or fish skin collagen. “Marine collagen” can work as a front descriptor when the ingredient list names fish, but it cannot be the only source statement. Claims are a separate review. In the EU, as of this review, no health claim for collagen peptides is authorised, and the permitted protein claims depend on the protein's share of the food's energy. In the US, structure/function wording belongs to the brand, which holds the substantiation and adds the DSHEA disclaimer. No disease claim is open in either market. The label is the brand's responsibility, in the market where it sells. What this page can do is keep the material facts straight: both grades are fish, both need the declaration, and the grade is defined by its specification, not by the word in front of the name. ## A short decision list - Need 80 mesh and a broader peptide gate: marine collagen. - Need a hydroxyproline range, ≥90% below 3,000 Da and 40 mesh: fish collagen peptides. - Need a species claim: either grade, with the species file and the traceability record. - Need a non-fish source: neither grade; the allergen and label position change with the species. - Label carries “marine collagen”: acceptable as a descriptor only when the ingredient list names fish. The catalog ranges are on the marine collagen product page and the fish collagen peptides page. The peptide and mesh gates are explained on the grades page; the certificate is read on the COA page; the allergen file is on the compliance page; the tests are on the identity page. ### 03 Marine collagen is stable dry; moisture and odour decide the rest URL: https://nutrition.rainwoodbio.com/products/protein-collagen/marine-collagen/stability/ Reviewed: 2026-11-20 Marine collagen is chemically stable as a dry powder. The changes that matter in storage are physical and sensory: moisture uptake, caking, a stronger marine odour, a shift from pale yellow toward tan, and in a stick pack or a drink, reactions with the matrix. The sealed pack and the storage condition set the shelf life; the bulk powder does not carry one universal number. In one lineMarine collagen is stable as a dry powder; moisture, odour and the matrix decide the shelf life, and the pack decides how much moisture reaches the powder. ## The powder: moisture, colour and odour The catalogue limit for loss on drying is ≤7.0%. That gate is checked at release, not a licence to store the powder in humid air. Marine collagen is hygroscopic: an opened pouch takes water from the room, the powder cakes, the as-is protein figure drops and the colour can darken from pale yellow toward tan. The seal and the store are practical parts of the specification even though neither appears as a number on the certificate. Moisture also matters inside a stick pack. Water can migrate from a flavouring, a fruit powder or a glucose syrup into the collagen, and a reducing sugar plus water plus warmth starts browning. The powder darkens and the taste changes before any microbiological signal appears. The formula and the seal share that control. Odour follows moisture and heat. A marine note is expected in fish-skin collagen and can strengthen with residual lipid, warmth or water. A lot can pass every number and still develop a stronger note in a warm warehouse, so a sensory check belongs beside the analytical panel. Light has a smaller role: it can shift the surface colour, but moisture and temperature drive the change. Keep the pouch closed and the store dry. ## The solution: clarity, heat and pH The powder dissolves to a clear to slightly opalescent solution. Once dissolved, heat, pH and microbial load interact. A hot fill or a pasteurisation step adds a heat load the powder never saw, and low pH plus heat can cut the peptide further, changing the molecular-weight curve and the mouthfeel. A solution also supports microorganisms in a way the dry powder does not; a warm hold tank is a different risk from a sealed pouch. If a liquid is required, validate the hold, set the pH and the dissolved oxygen, and measure the result in the drink rather than assuming the bulk result carries over. Clarity is the visible test. Haze can come from the peptide fraction, from ash near the top of its limit or from the matrix pH, and a bench trial at the target pH and concentration is the only way to tell which one is responsible. ## What drives change during storage Factors that move marine collagen during storage | Factor | What it does | Control | Moisture | Caking; loss on drying up; browning with reducing sugars | Sealed pack; desiccant; dry store | Heat | Faster moisture and colour change; browning | Cool store; cool process | pH | Haze; further hydrolysis in solution | Validate the matrix pH | Reducing sugars | Browning; changed taste | Formula check; moisture barrier | Residual lipid | Stronger marine odour over time | Raw-material control; sealed pack | Microbial load | Growth in solution or a wet powder | Dry pack; validated hold time These factors interact. Warmth and humidity together do more damage than either one alone, and a stick pack with a reducing sugar combines moisture, heat and a reaction partner in one sachet. The useful question is not whether marine collagen is stable, but for how long, in which pack, at which condition and in which matrix. ## A stability protocol for the ingredient Write the protocol around the pack: storage condition, time points and tests. A long-term arm at 25 °C and 60% relative humidity, an intermediate arm at 30 °C and 65%, and an accelerated arm at 40 °C and 75% give a warehouse view and a stress view. Add colour and odour to the panel, because they move before the protein figure does. At each point test protein, loss on drying, appearance, odour, peptide distribution and microbiology. Peptide distribution should move little in a dry powder, which is exactly why it is worth measuring: a shift shows that hydrolysis continued, and the comparison with the release sample becomes evidence rather than assumption. For a stick pack or a drink, repeat the work in the matrix under the process pH and heat load, and add clarity, taste and odour. Report individual results, not only a verdict, and name the pack and the lot family. ## The matrix decides the rest Capsules and tablets run at low water activity, but the shell and the excipients can pass moisture into the fill; check loss on drying and appearance after storage as well as at release. A stick pack is only as good as its seal: a pinhole is enough, and the strip as well as the powder has to be inspected. A beverage combines heat, pH, oxygen and light, and its shelf life has to be measured in the beverage itself. An overage is a label and stability decision for the formulator; it does not fix a pack that lets water in. A gummy or a chew is the hardest case: the powder competes with the base for water, and texture, colour and taste move together. ## How the shelf life is set There is no single shelf-life figure for marine collagen, because the pack and the conditions of storage set it. The retest period is written on the specification and backed by the stability file for that pack; a figure that names no pack, condition or test panel is a claim, not a shelf life. When the retest period ends, re-assay the retained sample before any extension. A bulk figure does not transfer to a repacked container, and an extension is a decision supported by data, not by default. For the packs, see the product hub; for release testing, the COA page; for pack sizes and lead time, the MOQ page; for the methods, the methods library; for the release file, the quality page. ### 04 Marine collagen: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/protein-collagen/marine-collagen/moq/ Reviewed: 2026-11-20 Marine collagen starts at 1 kg in a foil pouch; production moves in 25 kg fiber drums, and the standard packs ship in 1–7 days. To quote firmly, we need the fish source and species, the release gates for protein and peptide size, the quantity and pack, the destination and Incoterm, the document set with the fish allergen statement, and the market where the finished product will be sold. In one lineA 1 kg pouch is enough to qualify a lot; a 25 kg drum is the production unit, and both carry the same specification but not the same storage history. ## Why the minimum is 1 kg One kilogram is the smallest unit that can be released as a lot rather than scooped out of a larger pack. It supports a bench trial, a retained sample and an independent test, and it travels as a parcel, so a formulator can start before the production plan is frozen. The pouch carries a lot code, which is what makes the trial traceable back to the material that will ship. Traceability is the reason not to go smaller. A sub-kilogram order is split from a larger lot and repacked; the split may be clean, but the pack identity and the handling record are new. The 25 kg drum lowers the handling per kilogram, at the cost of committing inventory and opening a large pack whenever a small amount is needed. The powder is hygroscopic, so the small unit protects the rest of the stock as well. A trial does not require opening a drum that will sit in storage for months, and the unopened liner stays intact. ## Packs and formats Standard marine collagen packs | Format | Net weight | Where it fits | Handling note | Foil pouch | 1 kg | Qualification, trial, small batch | Moisture barrier; close it again after use | Fiber drum | 25 kg | Production | Liner inside; lot code repeated on drum and liner | Granulated powder | On request | Flow and dust | Different particle profile and wetting behaviour The catalogue powder passes 95% through 80 mesh. A granule is a new particle-size specification rather than a different bag: it changes flow, dust and wetting, and it can change the lead time. If the line needs one, put it in the enquiry before the quotation, not on the purchase order. ## Lead time and dispatch Standard packs are quoted at 1–7 days after order confirmation. The clock covers picking, documents and dispatch; freight, customs and the customer's own quality release sit outside it. A granulated or non-standard pack takes longer, and the quotation should show that separately. Ask for a dispatch date rather than the range. A pouch usually flies as a parcel; a drum moves on a pallet, and the Incoterm decides who books it. The COA, specification and allergen statement should be in the same shipment as the goods, not sent after them. ## What a quotation needs Six items make two offers comparable: - Product and source. Hydrolysed marine collagen, type I, fish skin, with the species named. - Release gates. Protein with its factor and basis, peptide content and molecular weight, loss on drying, ash, mesh and appearance. - Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated variant. - Destination and Incoterm. Country, port or address, and the agreed trade term. - Documents. COA, specification, SDS, fish allergen statement and any market-specific declaration the importer needs. - Use and market. How the material will be used, and the country where the finished product will be sold. An offer that names the product but not the source or the market cannot be compared with another. The allergen statement is part of the offer, not an afterthought. Commercial terms are not published here; they appear on the quotation. ## The sample is a qualification lot The 1 kg pouch is the lot to qualify. Run protein, peptide content, molecular weight, moisture, ash and microbiology, and keep back a retained sample from that pouch. If the label will name a species, add the species evidence before the trial rather than after the order. The lot code should run through the sample, the COA and the quotation. A trial below 1 kg is a repack. It is split off a bulk lot, gets a new handling record and is not the 1 kg foil pouch. Ask for the split in writing and file its lot code with the trial results; the powder on the bench and the powder in the production drum can be separate lots even when the paperwork matches. Reseal the pouch properly between trials. A folded-over top is not a heat seal, and the powder will pick up moisture each time it is opened. Record the opening date and keep the pouch dry. ## Terms to settle before the first order Put the commercial and quality terms on one page: Incoterm, pack, dispatch, specification revision, COA per lot, retained sample, retest period, fish allergen statement, and the change-control route for source, species or process. A quality agreement signed before the first production order is easier than the same discussion after a dispute. The change-control clause needs its own line. A different fish species, a different tissue or a different dryer can leave every number inside the range while changing the label claim and the allergen file. The buyer should hear about it before the change ships, not when the certificate arrives. If a lot misses the agreed specification, the retained sample and a re-test by the named method settle it; a photograph of the drum does not. The agreement should name the referee laboratory and say who pays for it. The catalog specification is on the product hub; the release tests are on the COA page; allergen and market files are on the compliance page; the MOQ glossary entry defines the term; shipping and documents are covered on the logistics page. ### 05 The regulatory file for marine collagen, and the fish allergen URL: https://nutrition.rainwoodbio.com/products/protein-collagen/marine-collagen/compliance/ Reviewed: 2026-11-20 Marine collagen is a food ingredient and a dietary-supplement ingredient in the European Union, the United States and the United Kingdom, and none of the three counts it as an additive that needs approval. What decides a launch is the fish allergen, the species and origin file, the contaminant calculation for the product as sold, and the wording on the pack. The buyer's regulatory team owns the destination route. In one lineMarine collagen is a permitted food ingredient, but the fish source makes the allergen declaration, the species file and the label the parts that decide a launch. ## Four checks in the file Start with the ingredient status: can a hydrolysed fish collagen be sold as food, or as a dietary ingredient, where it is going? The source file comes next. A fish material needs an allergen declaration plus a record of species and origin; it does not need the TSE/BSE dossier that a bovine material does. Then the contaminant panel, calculated against the product as sold rather than against the powder alone. Finally the label and any claim attached to it. Each check has an owner. The supplier and the importer hold the ingredient status; the recipe and the pack hold the allergen declaration; the food category sets the contaminant limit; the brand owns the claim. A file that ignores those boundaries tends to be thorough in one part and blank in another. ## European Union The EU does not, as of this review, regard collagen as a novel food; the material has a long history of consumption. That reading is about collagen in general, not a licence for every species, tissue or process, so a new source should still be checked against the current novel-food catalogue. The fish source is what creates the labelling duty. Fish appears in Annex II of Regulation (EU) No 1169/2011. The ingredient list must emphasise it, and the consumer must be able to read “fish” in the declaration. A front label that says marine collagen does not satisfy that rule, however clear it looks. Contaminants are governed by Regulation (EU) 2023/915. A supplement is tested as sold, while an ingredient is tested against the category it enters, so the file should say which basis applies. The EU regulatory notes hold the framework references. ## United States A supplement uses the material as a dietary ingredient; a conventional food uses it as an ingredient. The supplier names the basis for the intended use, and that note joins the buyer's file. Protein appears in the Nutrition Facts or Supplement Facts panel, and the source in the ingredient list. The Food Allergen Labeling and Consumer Protection Act makes fish a major allergen. The pack must name it in the ingredient statement or in a “contains” statement. “Marine collagen” is a marketing description, not the allergen declaration, and it does not move the duty. US federal law sets no lead ceiling for supplements; the purchase specification and state law fill the gap. California's Proposition 65 can add a warning at a high daily dose. The US regulatory notes carry the references. ## United Kingdom For the UK, work from retained food law and confirm the limits and allergen rules that apply when the lot is cleared. Fish remains one of the 14 allergens, and a prepacked item must carry the information on the pack. Great Britain and Northern Ireland do not follow the same route, so the delivery address decides which file is used. ## Contaminants and limits Contaminant limits · marine collagen sold as a food supplement | Element | EU | US | UK | Lead | 3.0 mg/kg | No federal supplement limit; state law applies | Current limit to be checked | Cadmium | 1.0 mg/kg | No federal supplement limit | Current limit to be checked | Mercury | 0.10 mg/kg | No federal supplement limit | Current limit to be checked | Arsenic | Not harmonised; member-state rules may apply | No federal supplement limit | Current limit to be checked The EU figures are the supplement levels in Regulation (EU) 2023/915 and apply to the product as sold. The catalogue adds arsenic at 2 mg/kg and repeats Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg. Those are specification limits, not results; the COA reports what the lot measured. ## Claims and the allergen statement No market here permits a disease claim on a food or a supplement. Protein claims are a separate regime: in the EU, “source of protein” and “high protein” depend on the proportion of energy the protein contributes in the food as sold. Regulation (EC) No 1924/2006 authorises health claims in the Union, and as of this review no collagen claim is on the list, so the pack copy should describe the ingredient and claim only the nutrient content the finished food qualifies for. In the United States, structure/function wording belongs to the brand. It must be truthful, substantiated and accompanied by the DSHEA disclaimer, and it does not change the allergen duty. For this material the allergen statement is direct: the collagen is fish-derived, so the finished pack must declare fish. A consumer with a fish allergy should avoid the product. The declaration belongs in the ingredient list or the “contains” statement in the form the market requires; it is mandatory, not a claim, and it cannot be moved into a footnote. ## Documents in the file - Batch COA with the release parameters and the contaminant results. - Data sheet and specification, with the fish-skin source, species and peptide distribution. - SDS in the 16-section format. - Fish allergen statement naming the species and tissue. - Traceability record for origin and species. - US basis-of-sale note for dietary-ingredient use. - Non-GMO, residual-solvent, halal or kosher declarations where required. Fish are not a TSE-relevant species, so the file does not need the TSE/BSE dossier that a bovine collagen file carries. Saying so up front stops a reviewer searching for paperwork that will never arrive. ## Before the first order - Are the fish-skin source, the species and the allergen statement written into the specification? - Does the protein figure come with its nitrogen factor and its basis? - Were the contaminant results judged against the limit for the product as sold? - Can the species and origin record support the wording on the pack? - Are the peptide and molecular-weight figures reported with their SEC method? - Does the document set travel with the lot, with the lot number matching the drum? The specification behind this page is on the marine collagen product page. The neighbouring fish grade and its allergen file are on the fish collagen peptides page; the source comparison is on the marine versus fish page; the quality page describes how the release file is assembled. ### 06 How we prove a marine collagen lot is collagen, and from fish URL: https://nutrition.rainwoodbio.com/products/protein-collagen/marine-collagen/identity/ Reviewed: 2026-11-20 Three questions decide a marine collagen lot: is it collagen, has it been cut into peptides, and is it fish. The first is answered by hydroxyproline and the amino acid profile, the second by SEC-HPLC, and the third by a species test or a documented chain. The grade — ≥80% peptide, at least 80% below 3,000 Da, 80 mesh — is a fourth check that the certificate carries. In one lineCollagen identity needs hydroxyproline, peptide identity needs the SEC curve, and source identity needs a species record; the protein figure proves none of the three on its own. ## The four identity layers Each layer answers a different question, and none of them substitutes for another. A certificate can be right on one and silent on the next, which is how a lot with the correct protein figure reaches a drum without anyone asking what the protein is or where it came from. Identity checks · question, evidence and what each misses | Layer | Question | Evidence | Blind spot | Composition | Is it collagen? | Hydroxyproline; amino acid profile with glycine, proline and hydroxyproline | Species and tissue | Size | Is it hydrolysed? | SEC peptide content and the fraction below 3,000 Da | Species; raw-material history | Source | Is it fish? | Species PCR, or a documented species chain | Which tissue; whether the test sample matches the drum | Grade | Is it the specified powder? | Peptide content, ash, moisture, 80 mesh | Species; the raw material behind the lot ## Hydroxyproline against protein, and the peptide balance Collagen is recognised by hydroxyproline, an amino acid made by hydroxylating proline once the chain is built; other proteins carry little of it. A collagen peptide usually carries hydroxyproline at roughly 8–13% of protein mass. This grade does not fix a hydroxyproline limit, so the figure is an extra check rather than a release line, but it is the simplest identity screen available. Two failures show up in the hydroxyproline-to-protein ratio. A non-collagen protein — soy, whey, pea or a hydrolysed cereal — raises the nitrogen without raising the hydroxyproline. Nitrogen spiking with urea or an ammonium salt raises Kjeldahl while the hydroxyproline stays where the collagen put it. The protein line alone shows neither. The second ratio is the peptide balance. The catalogue asks for ≥90.0% protein and ≥80.0% peptide by SEC, with at least 80% of the peptide below 3,000 Da. Protein minus peptide is not one substance; it covers free amino acids, non-peptide nitrogen and method bias, so the SEC fractions are more informative than the difference. A certificate that reports only the protein figure has not shown how much of the powder behaves as peptide. Keep the method beside the number. HPLC and colorimetric hydroxyproline do not return identical results, and a ratio built from two methods on one sample is stronger than one built across two certificates. ## What diffraction adds, and what it does not X-ray diffraction is a tool for crystals. It separates polymorphs and hydrates and produces a pattern that can be compared with a reference. A collagen peptide powder is amorphous, so diffraction returns a broad halo: it cannot say fish, and it cannot measure peptide size. It still answers one useful question. A powder that should be amorphous but shows sharp crystalline peaks is carrying a crystalline carrier or a mineral residue — lactose, dextrose, sodium chloride or a phosphate. That is a mass-balance check, read beside ash and the SEC curve, not a species check. XRD is not a routine release test here, and a “conforms” line without the pattern is thin evidence. The XRD method note sets out what the technique can show. ## What adulteration looks like Substitution routes · the change and the test | Route | Effect | Detection | Bovine or porcine collagen | Species, while the collagen chemistry stays intact | Species PCR; documented species chain | Gelatin | A high-molecular-weight tail; gelling on cooling | SEC above 3,000 Da; gel test | Non-collagen protein | Protein up, hydroxyproline down | Hydroxyproline-to-protein ratio; amino acid profile | Nitrogen spiking | Kjeldahl up, peptide mass flat | Ratio; total nitrogen against amino-acid nitrogen | Crystalline carrier | Ash or moisture; sharp XRD peaks | XRD; ash; mass balance | Cheaper fish species | The species claim, not the collagen identity | Species PCR; traceability record No one test covers the list. The defensible file combines hydroxyproline, the amino acid profile, SEC and a species method, and that panel is modest for the risk. ## Writing the identity into the specification - “Hydrolysed marine collagen, type I, fish skin; species and country of origin named.” - “Protein ≥90.0% by Kjeldahl with N × 5.55; factor and basis printed.” - “Peptide content ≥80.0% by SEC-HPLC; ≥80% below 3,000 Da; distribution bins reported.” - “Loss on drying ≤7.0%; ash ≤5.0%; ≥95% through 80 mesh.” - “Hydroxyproline result reported with its method, as an identity check.” - “Fish allergen statement; no other protein above the agreed limit.” - “CAS 9007-34-5 names collagen as a class; it does not name the species.” That CAS line carries no source information: 9007-34-5 covers fish skin, fish scale and bovine hide alike, so a specification built on it alone says nothing about where the collagen came from. The COA page maps each figure to its place on the certificate, and the grades page explains the peptide and mesh gates. ## Five questions for the supplier - Which species and tissue is this lot made from, and does the COA name them? - Which nitrogen factor and basis were used, and what is the hydroxyproline result and method? - Can you provide the SEC fractions as well as the 3,000 Da cut-off? - What supports the fish claim: a species PCR result, a documented species chain, or both? - What is the fish allergen statement, and does the drum lot number match the COA and the retained sample? Those five answers make a file; one protein percentage does not. Catalog ranges are listed on the product hub; the neighbouring fish grade is on the fish collagen peptides page; the methods library covers SEC and the other techniques; the quality page describes the retained sample. ### 01 What the COA for omega-3 concentrate actually contains URL: https://nutrition.rainwoodbio.com/products/fatty-acids/omega-3-concentrate/coa/ Reviewed: 2026-11-20 The certificate for an omega-3 concentrate lot reports the GC fatty-acid profile, EPA and DHA separately and as a total, the lipid form, free fatty acid, peroxide and p-anisidine values, and the contaminant panel. The limits here are the catalog gates; the batch COA carries the measured result. Total, form and oxidation decide a release, and none is readable alone. In one lineThe certificate has to be read on three axes at once: the EPA and DHA figures against their total, the ester or triglyceride form the figures were measured in, and the oxidation pair that says whether the oil is still fresh. ## The certificate as a lot report A certificate is auditable when each line carries a method, a limit and a measured result. The header should give the lot code, fish source, production date and declared form, because the form changes what several lines mean. The form is a certificate line, not a footnote. An ethyl ester lot and a triglyceride lot can read 60% EPA+DHA and still be different ingredients with different label names and mass bases. Composition and form · omega-3 concentrate | Parameter | Method | Release limit | Appearance | Visual | Clear, pale yellow oil | Identification | GC-FAME, full profile against a reference | Profile conforms | EPA (C20:5 n-3) | GC-FAME | 30.0–36.0% | DHA (C22:6 n-3) | GC-FAME | 20.0–26.0% | EPA + DHA | GC-FAME, sum of the two acids | ≥60.0% | Lipid form | Intact-lipid analysis; glycerol or ethanol | Ethyl ester or triglyceride, as declared | Free fatty acid, as oleic | Acid–base titration | ≤0.10% The EPA and DHA lines are separate on purpose. A 60% total can be split at different ratios, and the splits deliver different amounts of each acid. The form line decides whether the milligram figures describe an ester or a glycerol ester. ## The GC basis and the mass basis The method converts the oil to methyl esters, runs them down a capillary column and detects them by flame ionisation. The result can be reported as area per cent, as milligrams per gram of oil, or as free fatty acid equivalents. Those are different numbers for the same lot. Area per cent and milligrams per gram are not the same measurement. The glycerol backbone, the ethanol moiety and the unsaponifiable fraction sit outside the fatty-acid peak area, so the certificate must state its basis and the label dose must be derived from it. A label that declares 600 mg EPA+DHA from a 60% oil is using a mass basis; 60% by area has not proved that mass. The ester form adds a second conversion. On a free-fatty-acid-equivalent basis the ethanol moiety of an ethyl ester is excluded, so the same lot reads roughly 8% lower than on an ethyl-ester basis. Trade monographs such as the GOED voluntary monograph use the acid-equivalent basis, while a supplier certificate may report ethyl esters. Ask which basis is on the page before comparing two offers. Read the total with the two individual ranges. The catalog allows EPA 30.0–36.0% and DHA 20.0–26.0%, with a total floor of 60.0%. A lot at the bottom of both windows would sum to 50% and fail, so the total is the binding gate: with DHA at its 26.0% ceiling, EPA cannot fall below 34.0% and still be released. ## Release limits, results and the oxidation pair The release limit is the boundary for the lot; the result is what the laboratory measured. When the result column repeats the acceptance range, it is a copy of the gate rather than a measurement. Oxidation and contaminants · omega-3 concentrate | Parameter | Method | Release limit | Peroxide value | Iodometric titration | ≤5.0 meq O₂/kg | p-Anisidine value | Spectrophotometric | ≤20.0 | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent Oxidation is read as a pair. PV counts hydroperoxides, the first products of the reaction; p-AV counts the aldehydes that appear as they break down. Hydroperoxides decompose as the oil ages, so PV can fall while p-AV rises, and a low PV on an old lot is not evidence of freshness. TOTOX is twice PV plus p-AV: a lot at both catalog ceilings would calculate to 30, while the GOED monograph uses 26. That 26 is a trade benchmark, not a statutory limit; a buyer who wants it must write it into the purchase specification. Free fatty acid is a separate line and a tight one at ≤0.10%. The concentrate is distilled, so hydrolysis is limited, but a wet or warm pack can still move the figure. FFA is a hydrolysis measure, not an oxidation one; a low figure does not prove freshness. ## What moves between lots The distillation cut is the largest lever: the cut point decides how much EPA and DHA are collected, whether the route is transesterification and distillation or urea complexation. A small change in the cut moves the total and the ratio together; the species and the season move the starting oil. Molecular distillation runs hot, and heat can isomerise part of the all-cis EPA and DHA to trans isomers. The catalog does not set a trans-isomer limit, so a buyer who cares should ask for the figure and agree a ceiling. If an antioxidant is used, its type and level belong on the certificate or the TDS, because a change is a material change even when the assay holds. Colour and odour are the least quantitative lines and still useful: a pale, mild oil can be oxidised, a darker, fishier one can be fresh but poorly deodorised. Read them beside PV and p-AV. ## When to send a sample out Order an independent test for a new source, a market launch, an unproven form claim or a disputed oxidation result. The panel should answer the questions the certificate leaves open: GC-FAME with the chromatogram, and EPA, DHA, DPA and the trans isomers reported separately; intact-lipid analysis for the form; sterols and cholesterol where a vegetable oil is suspected; PV, p-AV and TOTOX by named methods; ICP-MS for the metals; and GC-HRMS for dioxins and PCBs where the market requires them. Each screen needs its limit of quantification: “not detected” without one describes the method, not the sample. Record the chain of custody and lot code, and test the retained sample. ## What to compare between suppliers Six lines make a comparison: the fish source and species; the form; EPA, DHA and the total with the basis; FFA, PV, p-AV and TOTOX; the contaminant panel; and the pack size with the lot code. Two offers that agree on 60% but differ on form, ratio or basis describe different oils. Traceability covers who distilled the lot, which cut, whether an antioxidant was added and whether the drum was nitrogen-blanked. The catalog specification sits on the omega-3 concentrate product page. The refined oil is specified on the fish oil product page; the form and ratio are compared on the grades page; the oxidation story is on the stability page; the GC method and the other tests are indexed under methods; the release workflow is on the quality page. ### 02 60% is not a grade: choosing an omega-3 concentrate URL: https://nutrition.rainwoodbio.com/products/fatty-acids/omega-3-concentrate/grades/ Reviewed: 2026-11-20 An omega-3 concentrate is specified by three decisions: the EPA plus DHA total, the EPA to DHA ratio inside that total, and the lipid form. This catalog is a 60% concentrate, EPA 30.0–36.0% and DHA 20.0–26.0% by GC with a total of at least 60.0%, supplied as an ethyl ester or a triglyceride. Two oils that both read 60% can deliver different amounts of each acid and carry different label names. In one lineA concentrate is defined by three decisions before the word grade means anything: the EPA plus DHA total, the EPA to DHA ratio inside it, and whether the oil is an ethyl ester or a triglyceride. ## Why 60% is not a grade The word concentrate describes a process, not a fixed product. A refiner transesterifies the oil to ethyl esters and distils the esters, or complexes the acids with urea and separates them; a re-esterification step can put the fatty acids back onto a glycerol backbone. Each route can reach 60%, and each leaves a different oil with a different certificate. The total is only the first number. The ratio decides how much EPA and how much DHA a serving carries. The form decides the ingredient name, the free-fatty-acid behaviour and the absorption route. Grade is the combination, and a quotation that names only the percentage has named one of three. Concentration is not a quality ladder. A 60% oil is not better than a refined 18/12 oil; it is a different ingredient for a different capsule size and a different label. The question is what the dosage form can carry and what the destination file permits, not which number is higher. ## The grades side by side Concentrate grades, their typical totals and what changes | Grade | Typical EPA+DHA | Lipid form | What it changes | Refined fish oil 18/12 | About 30% | Triglyceride | A different product; the baseline oil | 60% concentrate, ethyl ester (this product) | ≥60% | Ethyl ester | Smaller capsule; ester ingredient name and mass basis | 60% concentrate, triglyceride | ≥60% | Re-esterified triglyceride | Glycerol backbone restored; an extra process step | High-EPA concentrate | About 70–90%, EPA-dominant | Either form | A different ratio and a different label dose | High-DHA concentrate | About 70–90%, DHA-dominant | Either form | A different ratio; often a separate source question | Concentrate powder on carrier | Declared oil load | Oil on a carrier | Flow, a carrier declaration and a different mass The table separates catalog lines from typical market grades. This page supplies the second row: at least 60.0% EPA+DHA, ethyl ester or triglyceride, with EPA and DHA inside the catalog windows. The first row is the refined oil, specified on the fish oil product page; the last row is a powder on a carrier, quoted on request and carrying its own specification. The total and the two individual ranges are read together. With DHA capped at 26.0% and the total floored at 60.0%, a conforming lot cannot sit at 30.0% EPA; the effective working window is narrower than the printed windows, and the ratio moves with it. That is why the ratio belongs in the specification beside the total. ## What the oil is like to handle The concentrate is a clear, pale yellow oil at room temperature, insoluble in water and soluble in fats and organic solvents. It is less viscous than the refined oil it came from, because distillation has removed the heavier glycerides and part of the minor lipid fraction. Density is below 1, so a 1 kg amber bottle holds a little over a litre. Contact materials should be stainless steel or glass. Copper and iron catalyse oxidation at low levels, and a brass fitting or a mild-steel liner is a contact the specification should exclude. Keep the headspace small, close the bottle after sampling and record the opening date on the drum. Cold storage can cloud a triglyceride concentrate as higher-melting fractions separate; the cloud is not a defect by itself, and warming returns a clear oil. An ethyl ester concentrate generally stays clear at lower temperatures. Neither observation replaces PV, p-AV and FFA on the certificate. Odour is the practical freshness check. A mild marine smell is expected; a sharp or paint-like one points to aldehydes. Colour is weaker evidence, because deodorisation and bleaching can leave a pale oil that is already oxidised. ## The dose arithmetic and the ratio At 60% EPA+DHA, one gram of oil carries about 600 mg of the two acids. At a nominal 35/25 split, that is about 350 mg EPA and 250 mg DHA. A 1,000 mg softgel built on the concentrate therefore carries about 600 mg EPA+DHA, against about 300 mg for the same fill of 18/12 oil. Work backwards from the label. A serving that declares 500 mg EPA+DHA needs about 0.83 g of a 60% concentrate or about 1.67 g of 18/12 oil. If the label declares one acid, the ratio governs: 300 mg EPA from a 35% EPA oil needs about 0.86 g of oil, and the DHA arrives at whatever the ratio supplies. Those are arithmetic examples, not recommendations. The form changes the mass basis too. A certificate reported on a free-fatty-acid-equivalent basis reads about 8% lower than the same lot reported as ethyl esters, so the capsule fill and the label figure have to sit on one basis. A label built on one basis and a certificate on the other can disagree by more than the analytical tolerance. ## Writing the grade into the specification Six lines fix the grade: - Source and species, with the fish oil and the process route named. - Form: ethyl ester or triglyceride, stated on the certificate and on the label. - EPA and DHA ranges, the total floor, and the GC basis, including whether the result is area per cent or mg/g and on which equivalent basis. - Free fatty acid ≤0.10%; PV ≤5.0 meq O₂/kg; p-AV ≤20.0; a TOTOX ceiling if one is agreed. - Heavy metals and microbiology as listed; dioxins and PCBs where the market requires them. - Antioxidant type and level, the pack, and the fish allergen statement. A specification that says only “omega-3 60%” leaves the ratio, the form and the basis open, and three suppliers can answer it with three different oils. Write the three decisions, then the limits. The product hub carries the catalog lines; the COA page shows how the figures are reported; the stability page covers oxidation; the methods index covers the GC and the contaminant tests; the quality page describes the release workflow. ### 02.1 Omega-3 concentrate vs fish oil: the ratio, the form and the label URL: https://nutrition.rainwoodbio.com/products/fatty-acids/omega-3-concentrate/grades/omega-3-concentrate-vs-fish-oil/ Reviewed: 2026-11-20 The two products differ by concentration and often by form. The 18/12 fish oil carries about 30% EPA+DHA as a triglyceride; this concentrate carries at least 60% and is supplied as an ethyl ester or a triglyceride. The concentrate halves the mass per dose, changes the ingredient name and makes the ratio, the ester form and the fish allergen the facts the label must carry. In one lineThe concentrate and the fish oil carry the same two fatty acids at different masses: a gram of a 60% concentrate carries about 600 mg EPA+DHA against about 300 mg for an 18/12 oil, and the form and the label follow the concentrate, not the oil. ## The ratio is the part the percentage hides Both are bought on a two-number shorthand. Fish oil is written 18/12, meaning about 18% EPA and 12% DHA, a total near 30% and a ratio of about 1.5:1. The concentrate is written as a total, here at least 60%, with EPA 30.0–36.0% and DHA 20.0–26.0%. Read literally, those three catalog lines define a band from 60.0% to 62.0% and a ratio near 1.3–1.5:1. Refined 18/12 fish oil and a 60% omega-3 concentrate | Property | Refined fish oil 18/12 | 60% concentrate | EPA + DHA per gram | About 300 mg | About 600–620 mg | EPA per gram | About 180 mg | 340–360 mg | DHA per gram | About 120 mg | 240–260 mg | Nominal EPA to DHA ratio | About 1.5:1 | About 1.3–1.5:1 | Lipid form | Triglyceride | Ethyl ester or triglyceride | Mass for 600 mg EPA+DHA | About 2.0 g | About 1.0 g The total does not say how much of each acid a serving carries. A 60% oil at 1:1 and a 60% oil at 3:1 are different specifications, and the label dose follows the individual acids. If the formula targets EPA, a DHA-heavy concentrate wastes mass; if it targets DHA, an EPA-heavy one does the same. ## The dose arithmetic and the capsule The concentrate exists to make a smaller capsule possible. At 60%, a 1,000 mg softgel carries about 600 mg EPA+DHA, so one capsule can replace two 1,000 mg capsules of 18/12 oil. At 30%, the same dose needs about 2.0 g of oil before any overage. Work from the label backwards. A 500 mg EPA+DHA serving needs about 0.83 g of a 60% concentrate or about 1.67 g of 18/12 oil; a 250 mg serving needs about 0.42 g or about 0.83 g. Those are arithmetic examples, not recommendations. The fill weight is not the dose: a 1,000 mg softgel holds 1,000 mg of oil, of which 600 mg is EPA+DHA at 60%. The form changes the arithmetic by roughly 8%. On a free-fatty-acid-equivalent basis the ethanol moiety of an ethyl ester is excluded, so a 60% ethyl ester lot reads about 55% on the acid basis. The capsule fill, the label figure and the certificate have to use one basis, or the same oil will appear to gain or lose omega-3 between documents. ## Ethyl ester or triglyceride: what changes Concentration usually starts with transesterification. The fish oil triglycerides become ethyl esters, which are more volatile and can be separated by molecular distillation or urea complexation. A second step can re-esterify the acids onto a glycerol backbone; the result is a triglyceride, but not the natural distribution. The form is not cosmetic. A triglyceride carries the fatty acids on glycerol; an ethyl ester carries one fatty acid on ethanol. The two have different molecular masses and different absorption kinetics. Published absorption work generally shows lower fasting bioavailability for the ethyl ester form, with the gap narrowing when the dose is taken with a meal that contains fat. That is a formulation consideration, not a label claim. The form decides which tests matter. A triglyceride lot is checked for glycerol and for hydrolysis to free fatty acid; an ethyl ester lot is checked for the ester and for residual ethanol. An assay that measures total EPA and DHA cannot tell them apart. ## What the label has to say The ingredient name follows the form. A triglyceride concentrate can sit under the fish oil name the market accepts; an ethyl ester concentrate is a different ingredient and has to be named as the form the destination allows. Write the form into the specification and let the label reviewer choose the permitted name. The quantitative panel carries the dose: EPA and DHA in milligrams per serving, and the serving size that produces them. In the EU this sits in the nutrition declaration; in the US it sits in the Supplement Facts panel. The oil weight may appear in the ingredient list, but it is not the dose, and 60% on the front of a pack is not a substitute for the milligram figures. If the concentrate is spray-dried onto a carrier, the carrier joins the ingredient list and may add its own allergen. The oil load should be declared, because a powder at 30% oil is not the same product as a 60% oil, even when both are called a concentrate. ## The fish allergen statement Fish is the allergen that follows both products, and concentration does not remove it. In the EU, Annex II of Regulation (EU) No 1169/2011 lists fish and products thereof with no carve-out for refined oil, so a fish-oil concentrate supplement carries a fish declaration. Great Britain applies the same 14-allergen list under the Food Information Regulations 2014; Northern Ireland follows the EU text. In the US, FALCPA lists fish among the major food allergens, while the statutory definition carves out highly refined oils. That position depends on documented refinement and protein control, not on the oil being clear. The statement should cover the whole product. A fish-gelatin softgel shell is a second fish source; a carrier brings its own allergens, separate from the oil’s. A workable statement reads: “Fish oil concentrate derived from fish; refined and deodorised; fish allergen declaration required on the finished product unless the destination exemption is documented.” It names the source and the process without claiming an exemption the buyer has not established. ## When the concentrate is the right buy Choose the concentrate when capsule size or serving mass is the constraint, when the label can carry the concentrated form, and when the market file covers the source. Stay with the refined oil when the label names fish oil as the oil, when the formula is built on the natural triglyceride, or when the serving is large enough that mass is not the constraint. The concentrate is not a drop-in at the same weight: EPA and DHA per gram double, the form may change and the certificate lines change with it. Neither product is a route around the allergen or the label; the concentrate adds the form question, not a way to avoid the fish declaration. The catalog line is on the omega-3 concentrate product page; the 18/12 oil is on the fish oil product page; the concentrate grades are compared on the grades page; the GC and contaminant methods are indexed under methods; the release workflow is on the quality page. ### 03 Omega-3 concentrate oxidises; the concentration removes its natural protection URL: https://nutrition.rainwoodbio.com/products/fatty-acids/omega-3-concentrate/stability/ Reviewed: 2026-11-20 An omega-3 concentrate fails by oxidation. EPA and DHA are the most unsaturated acids in the oil, and the bonds that make them useful are the ones oxygen attacks. Concentration also removes much of the tocopherol and minor-lipid fraction that slowed the reaction in the crude oil, so the distillate is more exposed and depends on the antioxidant declaration and on the pack. In one lineThe concentration step strips the tocopherols and minor lipids that protected the crude oil, so the concentrate depends on an added antioxidant, a low-oxygen pack and a short, measured storage life. ## The sealed pack: headspace, light and the antioxidant Water is a minor component of the oil, and the catalog keeps free fatty acid at ≤0.10% rather than setting a moisture line. Hydrolysis still matters, because a wet or warm pack raises FFA, but the reaction that ends the storage life is oxidation. The air above the oil is the reservoir: each sampling replaces part of the headspace, and a drum that is half empty holds more oxygen than a full one. The 1 kg amber bottle and the 25 kg HDPE drum both block light; the closure, the liner and the transfer line are the weak points. Close the container between samples and decant a part-used drum into a smaller opaque one. A nitrogen blanket is available on request and should be written into the order when the oil will be stored or shipped for a long period. Because distillation has reduced the natural tocopherols, any antioxidant added back is part of the specification. Its type and level belong on the TDS, and a change is a material change. Copper and iron accelerate the reaction at trace levels, so the process description should exclude brass, mild steel and other contact materials that shed metal ions. ## Softgel, emulsion and the oil-water boundary A softgel encloses the oil; a drink or a liquid supplement disperses it as an emulsion. In the emulsion, oxygen meets the oil at the droplet surface, and a smaller droplet means more surface. Emulsifier choice, homogenisation, pH and the heat load all change how fast the oil reacts, and a bulk result does not predict the finished drink. The softgel is protected by its shell, but the seam and the shell’s permeability set the real barrier. A transparent shell on a lit shelf is an exposure, and a fish-gelatin shell is an allergen fact as well as a packaging choice. For a liquid, measure PV and p-AV at fill and through storage, and keep dissolved oxygen low; an antioxidant slows the chain but does not repair oil that has already reacted. ## What drives the reaction Factors that move an omega-3 concentrate during storage | Factor | What it does | Control | Oxygen | Forms hydroperoxides, then aldehydes | Low headspace, nitrogen, sealed container | Light | Drives photochemical oxidation | Amber or opaque pack, dark store | Heat | Raises the rate of every step | Cool store, low process temperature | Copper and iron | Decompose hydroperoxides | Stainless steel and glass contact | Water | Hydrolyses the esters; FFA rises | Dry oil, sealed pack, low humidity | Antioxidant | Slows the chain; cannot reverse it | Declare the type and the level The factors compound rather than add: warmth, light and a large headspace reinforce one another, and a softgel on a bright shelf feels both light and heat at once. The answer is specific to a pack, a condition and a time. ## A stability protocol for the concentrate Define the pack, the condition, the time points and the test panel before the first sample goes in. Long-term 25 °C/60% RH, intermediate 30 °C/65% RH and accelerated 40 °C/75% RH are the usual set; add a light-exposure arm, because a dark incubator cannot reproduce the failure that light causes. A heated oven test ranks formulations but does not replace data from the actual pack. Each time point covers PV, p-AV, TOTOX, FFA, appearance and odour. Run EPA, DHA and the total at the beginning and the end to show the profile has held, and include the trans-isomer figure if the specification sets one. Show the individual results and identify the pack and the lot family; a 1 kg bottle and a 25 kg drum differ in headspace and in how often they are opened, so one data set does not cover the other. Rancimat yields an induction time under heated air. It is useful for ranking antioxidants or lots, and the result then has to be confirmed in the pack. The softgel shell and the seal sit outside that test. ## How the finished formula changes it Four formats expose the oil in four ways: a softgel encloses it, an emulsion spreads it over a large interface, a powder on a carrier leaves surface oil exposed, and a bulk blend dilutes it with another oil. The last case changes the sterol profile and the EPA+DHA per gram, which is an identity question before it is a stability one. An overage or a stronger antioxidant cannot resurrect an oil that has already reacted: the aldehydes stay, and the smell comes back even when a fresh assay hides them. The formulator decides whether an overage is needed; that decision belongs with the label and the stability file, not with the pack alone. ## Setting the retest period No single shelf-life number applies to an omega-3 concentrate. The retest period belongs to a pack and a storage condition and is supported by data for that pack; without those three pieces, a number is only a claim. Re-assay the retained sample when the retest period ends and before extending use. An extension needs data; a bulk result does not transfer to a repacked bottle, a softgel or a powder. Each matrix and each pack changes the rate. The standard packs are listed on the MOQ page; the release tests are on the COA page; the form is compared with the refined oil on the concentrate versus fish oil page; the refined oil’s own protocol is on the fish oil stability page; the oxidation methods are indexed under methods; the release workflow is on the quality page. ### 04 Omega-3 concentrate: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/fatty-acids/omega-3-concentrate/moq/ Reviewed: 2026-11-20 Omega-3 concentrate starts at 1 kg, packed in a 1 kg amber bottle; the bulk pack is a 25 kg HDPE drum, and the standard pack is quoted at 1–7 days. A powder on a carrier is a separate quotation. A workable offer needs six answers: the form, the concentration and ratio with their basis, the pack, the destination and Incoterm, the documents, and the intended market. In one lineThe 1 kg amber bottle is the smallest unit we release as a traced lot, and it is the pack that carries the qualification sample for a concentrate. ## Why the minimum is 1 kg One kilogram is enough for a bench trial, a retained sample and an independent check of form or oxidation. It travels as a parcel, which helps when oil is needed before the production plan is fixed, and it is released under its own lot code. The bottle is a unit of sale, not a spoonful taken from a drum. Any quantity under 1 kg has to be split from a larger lot and repacked. Handling goes up, the original pack identity is lost and traceability becomes harder, while the oil itself is unchanged. At the other end, the 25 kg drum lowers handling per kilogram but holds more inventory for longer. The minimum is set by the pack, not by a volume target. ## Packs and formats Omega-3 concentrate packs | Pack | Net weight | Where it fits | Notes | Amber bottle | 1 kg | Trial, sample, small batch | Light barrier; close after sampling | HDPE drum | 25 kg | Production | Opaque; nitrogen blanket on request | Powder on carrier | On request | Sticks, tablets, dry blends | Oil load and carrier declared | Nitrogen-blanketed drum | 25 kg | Long storage or long transit | Lower headspace oxygen; the oil is unchanged The catalog form is a clear, pale yellow oil, insoluble in water and soluble in fats. A powder on a carrier is a different specification rather than a packing option: the carrier, the oil load and the allergen declaration all change, so raise it before the offer. ## Lead time and dispatch We quote the standard pack at 1–7 days after order confirmation. Picking, paperwork and dispatch sit inside that window; freight transit, customs clearance and the buyer’s own quality release sit outside it. A special pack adds time, and the offer should show it as a separate line. Ask for the dispatch date rather than the range alone. A bottle usually ships as a parcel and a drum on a pallet; the Incoterm decides who books the freight and who clears entry. The COA and the other lot documents should travel with the goods rather than follow them. ## What a quotation needs A quotation is comparable when it answers six questions: - Which product and form? Omega-3 concentrate, ethyl ester or triglyceride, with the form spelled out. - Which concentration and ratio? EPA and DHA ranges, the total floor, and the GC basis, whether area per cent or mg/g, and the equivalent basis. - How much, in which pack? 1 kg amber bottle, 25 kg HDPE drum, or a powder on a carrier. - Where is it going, and on which trade term? Country, port or address, and Incoterm. - Which documents? COA, TDS, SDS, species statement, fish allergen statement and any market declaration the importer needs. - What is it for, and where will it be sold? Supplement, food or another use, and the destination market. An offer that omits the form or the market cannot be compared with another. The same 60% oil can be declared under different names, and a file written for one form may not cover the other. Commercial terms are quoted per order, not published here. ## The sample is a lot, not a demonstration The 1 kg bottle is the unit we release for qualification. Check the form, EPA and DHA with their basis, the ratio, FFA, PV and p-AV before scaling up, and retain a sample from the same bottle. Sample, COA and quotation should share one lot code; without that link the sample is a demonstration rather than a qualification. A trial below a kilogram is a repack, not the catalog bottle. It comes from a bulk lot, gets its own handling record and cannot be passed off as the 1 kg amber bottle. Ask for the split in writing and keep its lot code with the trial data. The oil on the bench and the oil in the drum need not share a lot even when the specification matches. ## Terms to settle before the first order Put the commercial and quality terms into one quotation and one quality agreement: Incoterm, pack, dispatch window, specification revision, a COA per lot, the retained sample, the retest period, the antioxidant declaration and the change route. Agree them before the first production order; the same discussion is harder once a dispute exists. If a lot misses the specification, the route is a joint re-test of the retained sample against the named method, not a photograph of the bottle. Name the referee laboratory both sides accept and state who pays for it. A return based on colour or odour alone is hard to defend, which is why PV, p-AV and FFA belong in the release specification. The catalog line is on the omega-3 concentrate product page; the certificate lines are on the COA page; the form and ratio are compared with the refined oil on the concentrate versus fish oil page; the refined oil’s packs are on the fish oil product page; the release workflow is on the quality page; the analytical methods are indexed under methods. ### 05 The regulatory file for omega-3 concentrate URL: https://nutrition.rainwoodbio.com/products/fatty-acids/omega-3-concentrate/compliance/ Reviewed: 2026-11-20 Omega-3 concentrate is a fish-derived ingredient whose regulatory file turns on four facts: the fish source and its allergen, the status of the concentrated form for the destination, the contaminant limits for the oil, and the label wording that matches the form. The form matters before the rules do: an ethyl ester, a re-esterified triglyceride and a powder on a carrier are different ingredients for labelling at the same 60% total. In one lineThe concentrate’s regulatory file turns on four facts: the fish source and its allergen, the novel-food status of the ester concentrate, the contaminant limits for the oil, and the label wording for the form. ## The four parts of the file Four elements make up the file: the specification for the exact form and concentration, the lot certificate, the destination’s limits and labelling rules, and the record of how source, process and pack changes are handled. The COA proves the lot, the TDS states what was agreed and the SDS covers handling. The destination route is a separate decision recorded by the buyer’s team. ## European Union Fish oil has a food history that pre-dates the EU novel-food regime, so it is not a novel food. The concentrated ester has a separate status: the EU novel-food catalogue lists ethyl esters concentrated from fish oils as not novel, but only in food supplements. A conventional food, a different marine source or a different process needs its own check, and the catalogue should be read as of the review date. For supplements, Directive 2002/46/EC applies, and the label follows Regulation (EU) No 1169/2011. The Regulation’s Annex II allergen list includes fish and products thereof and gives refined oil no carve-out, so a fish-oil concentrate supplement must declare fish. Contaminants sit under Regulation (EU) 2023/915, which sets dioxin and PCB limits for fish oil and metal limits for supplements, calculated at the finished-product dose. Claims are governed by Regulation (EC) No 1924/2006, which permits only the authorised omega-3 claims and their conditions. ## United States On the US side, a supplement concentrate is a dietary ingredient under DSHEA, is made under 21 CFR 111, and declares EPA and DHA in Supplement Facts. FALCPA lists fish among the major food allergens, while the statutory definition carves out highly refined oils. That position depends on documented refinement and protein control; a clear oil and a high assay do not establish it. Substantiation and the DSHEA disclaimer are needed for any structure/function positioning, which is reviewed on its own. No disease claim is available; the certificate supports the material, not the pack copy. ## United Kingdom Great Britain’s food law is retained EU law. Fish is on the 14-allergen list, and a prepacked direct-to-consumer item must carry that information under the Food Information Regulations 2014. GB contaminant limits have their own figures, so use the current GB rule. Northern Ireland follows the EU framework, including the novel-food catalogue. ## Contaminants and the oxidation limits Catalog quality limits and destination contaminant limits are not the same kind of number; the table keeps them separate. Limits to confirm for the concentrate and the finished product | Parameter | Catalog or benchmark | What the file should show | Lead (Pb) | ≤3 mg/kg | Lot result, method and finished-product calculation | Cadmium (Cd) | ≤1 mg/kg | Lot result and any category exception | Mercury (Hg) | ≤0.1 mg/kg | Lot result and method | Arsenic (As) | ≤2 mg/kg | The agreed limit and the method | Dioxins and PCBs | Destination limit as WHO-TEQ | GC-HRMS result for the lot, where required | Peroxide value | ≤5.0 meq O₂/kg catalog | A quality limit, not a statutory contaminant limit | p-Anisidine value | ≤20.0 catalog | The measured pair and TOTOX | Fish allergen | Declaration in the EU and UK; US depends on refinement | Species, statement and label review PV and p-AV are quality limits, not statutory ones. They belong in the file because a product can comply and still be spoiled, and a fresh oil can still fail a contaminant limit. Report each metal separately. ## The fish allergen statement Fish is the allergen that follows the concentrate through every market. The protein is the allergen, not the oil; refining removes most of it, but the rules are written around the food. In the EU and the UK, fish and products thereof are on the allergen list, with no refined-oil exception in the EU entry. The supplier statement should name the fish source and species, the form, the refining steps, the protein-control evidence and the intended use. A workable wording is: “Fish oil concentrate derived from fish; refined and deodorised; fish allergen declaration required on the finished product unless the destination exemption is documented.” The statement covers the fill, not the whole product: a fish-gelatin shell is a second fish source, and a carrier brings its own declaration. ## Claims and the label No disease claim is made for omega-3 concentrate on this site. In the EU, the authorised omega-3 claims carry conditions of use, and the general-function wordings sit at 250 mg per day of EPA+DHA or of DHA, depending on the wording; the brand’s reviewer matches the wording to the dose. US structure/function claims require substantiation and carry the DSHEA disclaimer. The fish allergen must be declared on the label, and no disease benefit may be implied. The concentration and the ratio are description, not claims. “60%” describes the oil; it does not say what the oil does. The form belongs on the label too: an ethyl ester concentrate is not the same ingredient as the triglyceride oil, and the ingredient name should follow the form the market accepts. ## Documents for the concentrate file Assemble the COA — GC profile, EPA, DHA and total with the basis, form, FFA, PV, p-AV, heavy metals and microbiology — with the TDS, SDS, species and origin record, fish allergen statement, GMO statement, antioxidant declaration and form statement. Add dioxin and PCB results by WHO-TEQ where required, a residual-ethanol statement for the ethyl ester route, and the novel-food status note for supplements. Keep a versioned index at the front of the folder; a gap is cheaper to close before dispatch than after arrival. ## Checks before the first order - The specification names its version, the form, the concentration, the ratio and the fish source. - File the allergen, species, GMO and antioxidant declarations with the COA, TDS and SDS. - The novel-food status of the concentrated form is noted for the destination and the use. - Contaminant results are converted to the finished serving. - The allergen statement must work for every destination label. - The wording has been reviewed against the destination and the form. The catalog specification is on the omega-3 concentrate product page; the certificate lines are on the COA page; the form and label arithmetic are on the concentrate versus fish oil page; the refined oil’s file is on the fish oil compliance page; the release workflow is on the quality page; the analytical methods are indexed under methods. ### 06 How we prove an omega-3 concentrate lot is what it declares URL: https://nutrition.rainwoodbio.com/products/fatty-acids/omega-3-concentrate/identity/ Reviewed: 2026-11-20 Four measurements, read together, tell an omega-3 concentrate from a look-alike: the full fatty-acid profile, the EPA to DHA ratio, the lipid form, and the arithmetic that ties the figures to the declared 60%. The total is the weakest of them, because a 60% oil can be built from a stronger concentrate and a weaker oil, or from a different marine source. The form is a separate question: an ethyl ester and a triglyceride can both read 60%. In one lineA concentrate is identified by the whole fatty-acid profile and its ratio, the form the oil is in, and the concentration arithmetic, because a 60% total can be assembled from more than one oil. ## The layers that have to agree A certificate can name the right material and still leave the identity unproven. The five layers below are separate questions, and each needs its own evidence; a supplier who answers only the assay has described a concentration, not an oil. Identity layers for an omega-3 concentrate | Layer | Question | Evidence | Document | Which form, species and process? | Name, species statement, lot code | Profile | Is the fatty-acid pattern consistent with the source? | GC-FAME with the chromatogram | Ratio | Does the EPA to DHA ratio match the declaration? | EPA and DHA as separate figures | Form | Ethyl ester, triglyceride or re-esterified? | Intact-lipid analysis; glycerol or ethanol | Mass balance | Do the total, FFA and oxidation figures agree? | Assay, FFA, PV and p-AV on one lot The certificate covers the profile, the ratio and part of the mass balance. The form stays a declaration until the intact lipid is analysed, and the species record sits in the supplier file. The certificate, the pack and the retained sample should share one lot code. ## The ratio, the minor acids and the arithmetic The concentrate is bought on a total, but it is identified on a profile. EPA and DHA are two peaks among many, and the minor acids are the part a blend cannot hide. DPA (C22:5 n-3), palmitic acid, linoleic acid, cholesterol and the phytosterols tell the reader whether the oil looks marine and whether a vegetable oil has been added. The ratio is a specification line for a concentrate. This catalog holds EPA at 30.0–36.0% and DHA at 20.0–26.0% with a 60.0% total floor, which read together places the ratio near 1.3–1.5:1. A lot at 1:1 or at 3:1 is a different product, even when the total is 60%. The ratio is also a consistency check: a declared 1.4:1 that arrives at 1.1:1 points to a blend or a different cut before it points to an analytical error. The arithmetic closes the identity. If the certificate reports 60% EPA+DHA, then 1 g of oil should carry about 600 mg of the two acids on the same basis; if the label declares 600 mg per gram and the certificate reports 55% on a free-fatty-acid-equivalent basis, the two documents are using different denominators. That is not necessarily a fraud, but it is a mismatch the buyer has to resolve before release. ## Why XRD does not identify a liquid oil X-ray diffraction looks at how crystal planes scatter a beam. The concentrate is a liquid and has no lattice, so a pattern from the neat oil cannot report on species, form or concentration. A conformity line on an oil certificate says nothing about the oil. The technique belongs to the powder. A spray-dried concentrate sits on a carrier with a crystal structure, so the pattern reports the carrier and any crystalline contaminant, not the oil. It still says nothing about the fatty-acid profile or the form of the oil inside. For the oil itself, the profile is a GC-FAME result and the form is settled by intact-lipid HPLC or GC. FTIR offers a quick fingerprint but does not quantify EPA and DHA or separate ester from triglyceride. Offering XRD as the identity test for a liquid concentrate is offering the wrong instrument. ## Where substitutions show up Common omega-3 concentrate substitutions and the signals | Route | Signal | Test | Vegetable oil dilution | Linoleic acid and phytosterols rise; cholesterol falls | GC profile, sterols and cholesterol | Blend to hit 60% | Total holds; ratio and minor acids drift | Full GC profile against a retained reference | Ethyl ester sold as triglyceride | The form does not match the label | Intact-lipid analysis; glycerol and ethanol | Algal oil sold as fish oil | DHA-heavy profile; species record missing | Profile, species record, stable-isotope check | Oxidised oil | PV and p-AV climb; fishy smell | PV, p-AV and TOTOX | Over-concentrated cut with refined oil | Total on target; trans isomers and ratio vary | GC with trans isomers and the minor profile No single test covers every route. A certificate with only EPA, DHA and PV leaves the blend, the form and the species questions open. Bleaching and deodorisation strip the pigments, which makes colour the weakest signal: a pale oil may still be diluted or oxidised. ## Writing identity into the specification - “Omega-3 concentrate, ethyl ester or triglyceride, from a declared fish source; species and origin stated on the certificate.” - “EPA 30.0–36.0%, DHA 20.0–26.0%, EPA+DHA ≥60.0% by GC-FAME, with the basis and the equivalent basis stated.” - “Identification by full fatty-acid profile against a reference; chromatogram on request.” - “Form proved by intact-lipid analysis; glycerol or ethanol reported as appropriate.” - “Free fatty acid ≤0.10%; PV ≤5.0 meq O₂/kg; p-AV ≤20.0; a TOTOX ceiling if agreed; trans-isomer figure if agreed.” - “No vegetable oil, no undeclared carrier, no undeclared form change.” ## Five questions for the supplier - Which fish species and origin does this lot come from, and is it a single source or a blend? - Is the oil an ethyl ester or a triglyceride, and what intact-lipid method shows it? - Which GC basis supports the EPA, DHA and DPA results for this lot? - What are the PV and p-AV results, by which methods, and when was the lot produced? - If the result is disputed, will you re-test the retained sample jointly? Five answers of that kind form an identity file; one assay percentage does not. The product hub carries the catalog specification; the COA page shows where each figure sits on the certificate; the grades page compares the forms; the fish oil identity page covers the refined oil; the GC method is indexed under methods; the release workflow is on the quality page. ### 01 What the COA for sunflower phosphatidylserine actually contains URL: https://nutrition.rainwoodbio.com/products/fatty-acids/phosphatidylserine-sunflower/coa/ Reviewed: 2026-11-20 A sunflower phosphatidylserine certificate reports PS by HPLC, total phospholipids, loss on drying, heavy metals, microbiology and particle size, with the method and the release limit on every line. The PS figure and the phospholipid figure answer different questions, and the certificate is only complete when both are present. The limits below are the catalog specification; the batch COA is what confirms a particular pack. In one lineA sunflower PS certificate is readable only when the PS figure, the total phospholipid figure, the method and the moisture are reported side by side. ## The certificate as a test report For each parameter the certificate needs three things: what was measured, the method that produced the number, and the limit the lot was released against. A row that says “conforms” without the underlying method asks the reader to accept a conclusion. On a phospholipid powder the method row carries more weight than usual, because PS has no strong chromophore and different detectors can give different results. The identity row is the weakest line on many sunflower PS certificates. “Phospholipid profile conform” is a conclusion; the profile itself — the PS, PC, PE, PI and PA peaks and their proportions — is the evidence. Ask for the profile when the source or the grade is new. Release panel · sunflower phosphatidylserine | Parameter | Method | Release limit | Appearance | Visual | Light yellow to yellow powder | Identification | HPLC phospholipid profile | Conforms to the reference | Phosphatidylserine | HPLC, phospholipid assay | ≥50.0% | Total phospholipids | HPLC phospholipid assay | ≥70.0% | Loss on drying | Gravimetric | ≤5.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh ## PS, total phospholipids and the moisture beside them PS is one phospholipid among several. The catalog asks for ≥50.0% PS and ≥70.0% total phospholipids, so at the catalog limits about 20 percentage points of the powder can be other phospholipids — PC, PE, PI, PA and their lyso forms — and the lot still meets both lines. That gap is not a defect; it is what an enzymatically converted lecithin looks like. It does mean the PS figure should never be read as the phospholipid content. At the two limits, PS is 50 ÷ 70 = 71% of the phospholipid fraction. A lot that reports 55% PS and 70% total phospholipids is 79% PS within the phospholipids; a lot at 50% PS and 90% phospholipids is 56%. The same PS line, a different powder. The ratio is a quick consistency check, and a shift in it points to a different feedstock or a different conversion yield. The PS result is normally reported on the material as received, not on a dried basis. If a certificate does report a dry basis, the loss on drying has to sit beside it, because 52% as-is with 4% moisture is about 54.2% dry. The catalog limit is written without a basis, so the certificate should say which one it used; an unqualified percentage is ambiguous. Loss on drying is a release gate at ≤5.0%, and it is also the first number to watch in storage. The powder is hygroscopic, and a lot released near the limit has little headroom in a humid warehouse. ## Release limit versus batch result The release limit is the acceptance boundary; the batch result is what the laboratory measured. Both belong on the page in separate columns. A result column filled with the specification range is a copy of the gate, not a result. What the result column should contain | Parameter | Release limit | Result column | PS | ≥50.0% | A measured percentage, with the detector and the basis | Total phospholipids | ≥70.0% | A measured percentage and the profile behind it | Loss on drying | ≤5.0% | A measured percentage | Heavy metals | Per element | A figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot | Particle size | ≥95% through 80 mesh | The measured percentage through the sieve Peroxide value and acid value are not on the catalog panel. They are the two lines that show whether the lipid has oxidised or hydrolysed, so ask for them when the application is sensitive to either, and read them beside the PS result rather than instead of it. A lot can hold 52% PS and still be a poor raw material for a capsule if the peroxide value has climbed. ## What moves between batches The feedstock moves first. Sunflower lecithin varies with the seed, the crush and the phospholipid distribution, and the enzymatic conversion carries that variation into the PS powder. Conversion yield moves the PS and the residual PC; solvent removal and drying move the loss on drying and the colour; milling and sieving move the 80 mesh result without touching the chemistry. Colour is the least quantitative line. Light yellow to yellow covers a real range, and a darker powder can come from longer heat exposure or an oxidised fraction while the assay still passes. Read a colour shift as a prompt to ask for peroxide and acid values and the batch record, not as an automatic rejection. A trend across lots is more informative than a single result near a limit: PS drifting down while total phospholipids stay high, loss on drying climbing, or a new peak in the phospholipid profile. The lot code on the COA should match the pouch, the drum and the retained sample. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a source claim the certificate does not prove, or a disputed result. The useful panel is PS by HPLC with the chromatogram, the total phospholipid profile, loss on drying, peroxide and acid values, the heavy-metal panel, microbiology, and a fatty acid profile by GC to check the sunflower feedstock. If soy substitution is the concern, add a soy-specific screen: isoflavones or soy protein by a validated method, read with its detection limit. A “soy not detected” line without a limit says something about the method, not the sample. Chain of custody matters too: the sample tested should be the retained sample, and the report should name the lot. ## What to compare between suppliers Put six lines side by side: PS result and basis; total phospholipids and profile; source statement and fatty acid profile; loss on drying; peroxide and acid values; heavy metals, microbiology and particle size. Two quotations that agree on 50% PS but differ on the phospholipid figure or the source are not the same powder. The catalog specification sits on the sunflower PS product page. The soy material is a separate specification on the soy phosphatidylserine page; the tests that separate the two sources are on the identity page; the HPLC method is described in the methods library; the release workflow is on the quality page. ### 02 Sunflower phosphatidylserine: what the grade and the particle form change URL: https://nutrition.rainwoodbio.com/products/fatty-acids/phosphatidylserine-sunflower/grades/ Reviewed: 2026-11-20 Sunflower phosphatidylserine is sold mainly as a ≥50.0% PS powder with ≥70.0% total phospholipids, so the grade question is what else is in the powder: the other phospholipids, the particle form and any dilution. The catalog grade here is the 50% powder at 80 mesh; a granulated form is a particle change, while a higher-PS concentrate or a lower-PS dilution is a different specification with its own certificate. The PS number alone does not tell you which one you have. In one lineThe grade is set by the PS content, the phospholipid figure and the particle form, not by the source name on the pack. ## Why the grade is more than the PS percentage Sunflower phosphatidylserine is made by converting sunflower lecithin phospholipids to PS, and the conversion does not reach 100%. The powder therefore contains PS, unreacted PC and PE, other phospholipids such as PI and PA, a little neutral oil and moisture. Two powders can both read 50% PS and differ in everything else. The catalog grade is defined by three lines: PS ≥50.0% by HPLC, total phospholipids ≥70.0%, and ≥95% through 80 mesh. The phospholipid line limits how much of the powder can be non-phospholipid material. A 50% PS product with 55% total phospholipids would fail the catalog grade, whatever the label says. Source is a separate axis. Sunflower and soy PS are compared on the sunflower vs soy page; this page is about the grade ladder within sunflower. ## The grade ladder Sunflower PS forms and what changes | Form | PS / phospholipids | What it is | Main consequence | Standard powder (catalog) | ≥50.0% / ≥70.0% | 80 mesh powder from sunflower lecithin | The reference grade for capsules, tablets and blends | Granulated | Same chemistry | Granulated powder, on request | Better flow, less dust; particle profile changes | Higher-PS concentrate | Above 50%, separate specification | Further enrichment or a different conversion | Less powder per serving; its own COA and method | Diluted grade | Below 50%, separate specification | PS powder on a carrier | More powder per serving; carrier and label change The first row is what this catalog supplies. The other rows are separate specifications that exist in the market: a 70% concentrate is not a stronger version of the same pack, and a 20% dilution is not a packing choice. Each has its own PS figure, phospholipid figure and certificate, and the label has to name what is actually in the powder. This catalog does not list them. Do not accept a grade switch on the PS figure alone. A granulated form should hold the same PS and phospholipid results; a concentrate or dilution should not. If the PS figure stays at 50% but the phospholipid figure moves from 70% to 90%, the powder has changed even though the headline number has not. ## Powder, flow and the 80 mesh line The standard powder is specified at ≥95% through 80 mesh, which is about 177 µm. That is a fine powder: it disperses well in a blend but can dust, cake and cling to surfaces. Granulation improves flow and reduces dust, but it changes the particle-size distribution and the dispersion behaviour in water. The material is hygroscopic and dispersible in water rather than soluble to a clear solution; in water it forms a phospholipid dispersion. In fats and organic solvents it behaves as a lipid. That dual behaviour is useful in a capsule fill or an oil-based blend and awkward in a dry mix that will see humidity. Particle size is a finishing specification. A change of mill or sieve can move the 80 mesh result without any change in the PS chemistry, so the particle line should be read with the bulk behaviour, not as a purity number. ## Dose arithmetic and the label The label declares PS, not powder. A formula that declares 100 mg of PS per serving needs 200 mg of a 50% powder, 143 mg of a 70% concentrate, or 500 mg of a 20% dilution. Those are manufacturing figures, not a suggested intake. The arithmetic is the reason a grade switch moves the capsule size and the excipient load even when the declared PS stays the same. The phospholipid figure does not go on the label as PS. If the powder is 50% PS and 70% phospholipids, the remaining 20 points are other phospholipids, and a label that declares 70% phospholipids as if it were PS overstates the ingredient. Declare the PS figure from the certificate, state the source, and keep the phospholipid figure in the specification. Overages are a formulation decision. If a capsule is built with an overage, the extra powder changes the fill weight and the label arithmetic; it does not change the grade. Record the basis — as-is — so that the weigh-up and the label use the same number. ## What to write into the specification - “Phosphatidylserine (sunflower lecithin), PS ≥50.0% by HPLC; total phospholipids ≥70.0%.” - “Identification by HPLC phospholipid profile; report the profile.” - “Loss on drying ≤5.0%; peroxide value and acid value reported on request.” - “Particle size ≥95% through 80 mesh; a granulated form is a separate specification.” - “Source: sunflower lecithin; soy statement and fatty acid profile on file.” - “Heavy metals and microbiology as listed; pack and storage condition named.” Write the grade, the source and the particle form as three separate lines. “Sunflower PS 50%” leaves the phospholipid figure, the mesh and the granulated option open, and those are the three lines that decide whether the next lot behaves like the trial lot. The product page carries the catalog figures; the COA page shows how the two assay figures are reported; the stability page covers the pack; the MOQ page covers pack and lead time; the soy page gives the other feedstock's specification; the methods library describes the assay; the quality page covers release. ### 02.1 Sunflower phosphatidylserine vs soy: the source, the allergen and the label URL: https://nutrition.rainwoodbio.com/products/fatty-acids/phosphatidylserine-sunflower/grades/phosphatidylserine-sunflower-vs-soy/ Reviewed: 2026-11-20 Sunflower and soy phosphatidylserine differ in the lecithin feedstock, not in the PS headgroup, so the PS assay reads the same on both. The feedstock changes the fatty acid and sterol profile, the allergen declaration and the regulatory citation, and those three are what a buyer has to check. Switching source is a label and file change, not only a supply change. In one lineSunflower and soy phosphatidylserine carry the same PS headgroup; the lecithin feedstock changes the fatty acid profile, the allergen position and the regulatory citation. ## What sunflower phosphatidylserine actually means The claim is about the lecithin, not the serine. Commercial sunflower PS is made by taking sunflower lecithin, whose phospholipids carry sunflower fatty acids, and converting part of the phosphatidylcholine to phosphatidylserine with the enzyme phospholipase D and L-serine. The PS headgroup is the same molecule whether the feedstock was soy or sunflower; the fatty acids attached to the glycerol are what carry the plant's signature. That has two consequences. First, the PS assay cannot tell the two sources apart. Second, the source claim is only as good as the lecithin supply chain: identity-preserved feedstock, a documented conversion step and a lipid fingerprint on the finished powder. A certificate that says sunflower without those is a statement, not evidence. The serine itself may be fermentation-derived or synthetic. That does not normally change the source claim, because the claim refers to the phospholipid feedstock, but the specification should say what sunflower applies to so that the label and the file use the same definition. ## The feedstock shows up in the lipid profile Sunflower lecithin is rich in linoleic acid (C18:2) and carries palmitic and oleic acids, with little or no linolenic acid (C18:3). Soy lecithin carries a measurable linolenic fraction and a different sterol ratio, and it carries isoflavones that are specific to soy. The PS headgroup is identical, so the fatty acid and sterol profile is the practical way to check the source. Sunflower and soy phosphatidylserine compared | Property | Sunflower PS | Soy PS | Lecithin feedstock | Sunflower lecithin | Soybean lecithin | PS headgroup | Phosphatidylserine | Phosphatidylserine | Fatty acid marker | High linoleic; little or no linolenic | Linoleic plus a measurable linolenic fraction | Lipid markers | Sunflower sterol ratio | Soy sterol ratio, with isoflavones as a separate marker | PS assay | ≥50.0% by HPLC | 50.0–55.0% by HPLC-ELSD | Allergen position (EU and US) | Not a regulated major allergen | Soy is a regulated major allergen | EU novel-food list | No sunflower-specific entry, as of this review | Soy entry, with designation and conditions The table is not a ranking. Both materials are legitimate; the choice depends on the label, the market and the supply. The PS figure and the phospholipid figure are grade questions, and they are separate from the source question. ## The allergen difference is the commercial reason In the EU, soybeans and products thereof are on Annex II of Regulation (EU) No 1169/2011, with narrow derogations for fully refined soybean oil and fat and certain tocopherol and phytosterol derivatives. Soy lecithin and soy PS are not within those derogations, so a soy PS ingredient brings a soy declaration into the finished product. Sunflower is not on that list, and sunflower lecithin does not carry the declaration. In the US, soy is one of the major food allergens under FALCPA and must be declared by its common name. Sunflower is not. The practical effect is that a sunflower PS product can be positioned for a soy-avoiding consumer, while a soy PS product has to carry the declaration and the consumer-facing consequence. Two cautions. A soy-free claim is about the whole manufacturing line, not only the ingredient: a sunflower-sourced powder made on a line that also handles soy needs segregation and a validated cleaning regime before that claim is used. And sunflower is not allergen-free in an absolute sense; it is simply not a regulated major allergen, and individual sensitivity is a separate matter. ## What the label has to say In the EU, the Union-list entry for the soy material carries the designation “Soy phosphatidylserine and phosphatidic acid”, category limits and a restriction on marketing to pregnant and breast-feeding women. There is no sunflower entry to borrow. A sunflower product therefore needs its own market route, and its label cannot use the soy designation. In the US, the Supplement Facts panel should name phosphatidylserine and identify the source, for example “phosphatidylserine (from sunflower lecithin)”. The source is part of the ingredient description, not a marketing line. If the product is a conventional food rather than a supplement, the GRAS basis has to cover that use. The allergen statement is a separate line. A soy PS product declares soy; a sunflower PS product does not, unless cross-contact or another ingredient introduces it. The label reviewer should see the certificate, the source statement and the allergen statement together, because the three have to agree. ## What changes when you switch source The PS number can stay the same while everything around it changes. The label ingredient description changes; the allergen declaration changes; the EU regulatory citation changes; the fatty acid profile changes, and with it the oxidation behaviour and the flavour of the powder. A switch also reopens the stability file, because the lipid profile is not the same. Operationally, a switch needs a new specification version, a new COA review, a label review and a market-file check before the first production lot. A trial batch is the place to catch a flow, taste or dispersion difference; the certificate will not show it. Do not assume the two sources are interchangeable just because both assay at 50% PS. The reverse switch has the same requirements. A buyer who moves from sunflower to soy for supply reasons takes on the soy declaration and the soy Union-list route, and the label and the file have to move with the material. ## What to write into the specification - “Phosphatidylserine (sunflower lecithin), PS ≥50.0% by HPLC; total phospholipids ≥70.0%.” - “Source definition: phospholipids derived from sunflower lecithin; state the serine source if the claim depends on it.” - “Fatty acid profile and sterol profile on file; report them for source verification.” - “Allergen statement: no soy ingredient; cross-contact controls as agreed.” - “EU novel-food status and US dietary-ingredient or GRAS basis stated for the intended use.” - “Label designation and source wording agreed before the first order.” Write the source, the grade and the market route as three lines, and keep them together in the file. The sunflower PS product page carries the catalog figures; the soy phosphatidylserine page carries the other specification; the grades page covers the grade ladder; the compliance page covers the EU and US routes; the identity page covers the source evidence; the methods library describes the assays; the quality page covers release. ### 03 Sunflower phosphatidylserine is hygroscopic; the pack and the lipid profile set the shelf life URL: https://nutrition.rainwoodbio.com/products/fatty-acids/phosphatidylserine-sunflower/stability/ Reviewed: 2026-11-20 Sunflower phosphatidylserine is a hygroscopic phospholipid powder with a high linoleic acid content, so it picks up moisture and oxidises, and an aqueous dispersion is less stable than the sealed powder. The pack, the seal and the storage temperature set the shelf life; the assay on the certificate says nothing about either. Assign the retest period from stability data for the exact pack. In one lineSunflower PS fails by moisture pickup and lipid oxidation, so the pack, the seal and the fatty acid profile decide the shelf life before the assay does. ## The powder: moisture, oxygen and colour The catalog sets loss on drying at ≤5.0%, which is a release gate rather than a storage allowance. Once the foil pouch is opened, the powder pulls moisture from the air; the as-is PS figure falls, the powder cakes, and the dispersion behaviour changes. The pouch should be resealed properly, or the remainder transferred to a smaller dry container. Oxidation is the second driver. Sunflower PS carries a high linoleic acid fraction, and the double bonds are the site of oxidation. The products of that reaction show up as a rising peroxide value, then as a colour shift and an off note. The catalog panel does not include peroxide or acid value, so ask for them when the application is oxidation-sensitive and track them across lots. Light and heat accelerate both moisture movement and oxidation. The sealed pouch is the barrier, and a clear jar on a bench is not a substitute. Let a cold pack equilibrate before opening so that condensation does not form on the powder. ## The dispersion is the less stable format PS is dispersible in water but does not give a clear solution; it forms lamellar structures or vesicles depending on the concentration and the process. In water, hydrolysis and oxidation run together, and the pH, the dissolved oxygen, the temperature and the hold time all move the result. A liquid fill needs its own stability work; the bulk powder data does not transfer. If a liquid is unavoidable, keep oxygen low, control the pH, protect from light, and validate the hold time before filling. A pasteurisation or hot-fill step adds a heat load that the powder never sees. For the applications in this catalog — capsules, tablets and powder blends — the powder is the relevant format, and the liquid work is a separate project. ## What drives degradation Factors that move sunflower PS during storage | Factor | What it does | Control | Moisture | Raises loss on drying; cakes the powder; lowers the as-is PS figure | Sealed foil pouch; dry store; reseal after opening | Oxygen | Oxidises the linoleic fraction; raises peroxide value | Low headspace; sealed pack; modified atmosphere if specified | Heat | Accelerates oxidation and hydrolysis | Controlled store; cool process | Light | Promotes oxidation and colour change | Opaque or foil pack; dark store | Trace metals | Catalyse oxidation | Avoid iron and copper contact; check the metal panel | Acid or alkali | Hydrolyses the ester bonds; raises acid value | Keep the powder neutral and dry; validate any matrix pH These factors act together. A warm, humid store with the pouch folded open is worse than any single factor, and a dispersion at neutral pH in clear glass combines several at once. The useful question is not whether sunflower PS is stable, but stable in which pack, at which condition, for how long. ## A stability protocol for the ingredient A useful protocol names the pack, the condition, the time points and the tests. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% relative humidity cover the warehouse; accelerated storage at 40 °C/75% relative humidity stresses the pack. Add a light-exposure arm, because a dark incubator misses the photostability question. At each point test PS by HPLC, total phospholipids, loss on drying, peroxide value, acid value, appearance and microbiology. For a capsule or tablet, repeat the work in the finished form; for a powder blend, include the blend matrix, because the other ingredients can move moisture or catalyse oxidation. Report the individual results, not only a pass statement, and identify the pack and the lot family. Ask for the stability summary for the pack you will buy. A 25 kg fiber drum and a 1 kg foil pouch have different headspace, different surface-to-volume ratios and different opening histories; the data belongs to the pack. ## The finished formula changes the answer A capsule or tablet starts with low water activity, but the shell, the excipients and the manufacturing humidity can still move moisture into the fill. Check loss on drying and appearance at release and again after storage. A tablet adds compression heat and pressure, so the particle form and the binder matter as much as the PS figure. A powder blend is the most exposed format: the pouch or stick is opened repeatedly, the powder sits in a scoop, and the other ingredients may be hygroscopic. The blend's stability is measured in the blend, not inferred from the bulk powder. The formulator decides whether an overage is needed; that is a label and stability decision, and it does not repair a pack that lets moisture in. ## How the shelf life is set We do not publish a single shelf-life number for sunflower PS, because the pack and the storage condition set it. The assigned retest period belongs on the specification and is supported by the stability file for that pack. A number without a pack, a condition and a test panel is not a shelf life; it is a claim. After the retest period, re-assay the retained sample before extending use. Do not extend by assumption, and do not carry a bulk figure across to a repacked container. The product page lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the soy page shows the other feedstock's specification; the methods library describes the assay; the quality page describes the release workflow. ### 04 Sunflower phosphatidylserine: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/fatty-acids/phosphatidylserine-sunflower/moq/ Reviewed: 2026-11-20 The MOQ for sunflower phosphatidylserine is 1 kg, supplied as a 1 kg foil pouch, with a 25 kg fiber drum as the bulk pack and 1–7 days lead time for the standard form. A firm quotation needs the PS and phospholipid figures, the source statement, the pack, the destination and the documents. The 1 kg pack is also the qualification sample, so the lot code on the sample, the COA and the quotation should match. In one lineOne kilogram is the qualification unit: enough for a bench trial, a retained sample and an independent PS assay from the same lot. ## Why the minimum is 1 kg The 1 kg pouch is a commercial unit with a lot code, not a scoop from a drum. It covers a bench trial, a retained sample and an independent PS assay from the same lot, which is the set a formulator needs before a production order. It also moves as a parcel, so a trial can start before the production plan is fixed. Below 1 kg, material is usually split from a larger lot and repacked. That adds handling and loses the original pack identity without changing the chemistry. The 25 kg fiber drum is the bulk unit: less handling per kilogram, but more inventory and a longer storage period. The MOQ is a pack decision, not a volume incentive. ## Packs and formats Standard sunflower PS packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture and light barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Particle profile and mesh change The catalog form is an 80 mesh powder, ≥95% through 80 mesh. Granulation is a different particle specification, not a packing choice: say so before the quotation, because it moves the particle-size line and may move the lead time. A dilution or a higher-PS concentrate is a different specification again, outside this catalog grade, with its own PS and phospholipid figures. ## Lead time and dispatch The standard pack is quoted at 1–7 days from order confirmation. That window covers picking, document preparation and dispatch; it does not include transit, customs clearance or the customer's own quality release. A granulated form or a non-standard pack adds time, and the quotation should state it separately. Ask for the dispatch date, not only the range. A 1 kg pouch usually moves as a parcel, while a 25 kg drum travels on a pallet; the Incoterm says who books the freight and who clears entry. The COA and the other lot documents should travel with the pack, not follow it. ## What a quotation needs Six items make a quotation firm enough to compare: - Product and source. Sunflower phosphatidylserine, with the sunflower lecithin source written out and the CAS number on the record. - Specification. PS figure, total phospholipids, loss on drying, particle size, heavy metals, microbiology and the method. - Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated form. - Destination and Incoterm. The country, the port or address, and the trade term. - Documents. COA, specification, SDS, allergen and GMO statements, and any market-specific declaration. - Intended use and market. Supplement, food or another use, and the market where it will be sold. A quotation without the source and the intended market is incomplete. The same PS figure can fit one destination and fail another, and the allergen statement is part of the offer. Commercial terms are stated on the quotation. ## The sample is a lot, not a demonstration The 1 kg pack is the qualification sample. Test PS, total phospholipids, loss on drying, peroxide and acid values, and microbiology before scaling, and keep a retained sample from the same pack. The lot code on the sample, the COA and the quotation should match. A sample that cannot be traced to a lot is a demonstration, not a qualification. A bench trial that needs less than a kilogram is a repack, not the catalog pouch. It leaves a bulk lot, gets its own handling record and cannot be presented as the 1 kg foil pack. Ask for the split in writing and keep its lot code with the trial results. The powder on the bench and the powder in the production drum may come from different lots even when the specification is identical. ## Terms to settle before the first order The quotation should show the commercial terms and the quality terms on the same page: Incoterm, pack, dispatch window, specification revision, a COA for each lot, the retained sample, the retest period and the route for a change. Settle those in a quality agreement before the first production order; the same conversation is harder after a dispute. If a lot misses the agreed specification, the route is the retained sample and a joint re-test against the named method, not a photograph of the drum. The quotation and the quality agreement should say who pays for the referee laboratory and which laboratory both sides accept. A return decided on appearance alone is hard to defend on either side. The product page carries the catalog specification; the COA page lists the release tests; the compliance page covers the market files; the soy page gives the other feedstock's specification; the methods library describes the assay; the quality page covers release. ### 05 The regulatory file for sunflower phosphatidylserine URL: https://nutrition.rainwoodbio.com/products/fatty-acids/phosphatidylserine-sunflower/compliance/ Reviewed: 2026-11-20 Sunflower phosphatidylserine is a food ingredient whose regulatory position depends on the destination, the intended use and the source. The EU novel-food list carries entries for soy phosphatidylserine and for phosphatidylserine from fish phospholipids, and the sunflower material has to be assessed on its own history and file. This page lists the documents and checks that belong in that file; the buyer's regulatory team confirms the route. In one lineThe sunflower source takes soy off the allergen line; it does not take the market file off the desk, because the EU novel-food entries name soy and fish, not sunflower. ## What the file contains The file has four parts: the specification for the sunflower material, the COA that releases the lot, the destination route and limits, and the change-control record for source, process and pack. The COA reports the lot; the specification states the grade; the SDS covers handling. None of them settles the route, which is recorded separately. Source is the first line in this file. Phosphatidylserine is not a single regulatory object: the EU Union list names a soy material and a fish-derived material, and the sunflower material has to be assessed on its own. A file that cites the soy entry for a sunflower lot has cited the wrong source. ## European Union Food supplements sit under Directive 2002/46/EC and the general food law of Regulation (EC) No 178/2002. The novel-food framework is Regulation (EU) 2015/2283, and the Union list is Commission Implementing Regulation (EU) 2017/2470. As of this review, that list carries an entry for soy phosphatidylserine and phosphatidic acid — with the label designation “Soy phosphatidylserine and phosphatidic acid”, category limits and a restriction on marketing to pregnant and breast-feeding women — and an entry for phosphatidylserine from fish phospholipids. It does not carry an entry for sunflower phosphatidylserine. That absence is not a conclusion. Whether the sunflower material is novel depends on its history of use in the Union before 15 May 1997, and that is a documented assessment, not an assumption from the word lecithin. Until the assessment is closed, the buyer's regulatory team should keep the route open and should not copy the soy designation onto a sunflower label. Allergen labelling is separate. Regulation (EU) No 1169/2011 Annex II lists soybeans and products thereof, with narrow derogations for fully refined soybean oil and fat and certain tocopherol and phytosterol derivatives; soy lecithin and soy PS are not within those derogations. Sunflower is not on the list. Great Britain keeps its own novel-food register and labelling, and Northern Ireland follows the EU list; the delivery address decides which applies. ## United States In the US, the route depends on the use. A dietary supplement uses the dietary-ingredient framework of the FD&C Act as amended by DSHEA; a conventional food use needs a GRAS basis or an approved food additive. Sunflower PS has been the subject of GRAS notices for specified food uses, but a GRAS conclusion is use-specific and does not by itself cover a dietary supplement or an unlisted food category. The supplier states the basis it holds; the buyer checks that it extends to the finished product. If the ingredient was not marketed in the US before 15 October 1994, the new-dietary-ingredient question arises, with its own notification route. That is a separate question from allergen labelling and from the structure/function claim review. Soy is one of the major food allergens under FALCPA and must be declared by its common name; sunflower is not. The finished-product label, not the drum label, carries that declaration. ## Contaminants and the finished-product dose The contaminant panel is a finished-product calculation, not only a drum result. The table is the usual starting point for a food-supplement file; the current destination text and the daily dose decide the final limit. Contaminant limits to confirm for the finished product | Parameter | Typical supplement reference | What the file should show | Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method, limit and the dose calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception | Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result and method | Arsenic (As) | Customer or market limit | The agreed limit and the method, on the certificate Commission Regulation (EU) 2023/915 sets the EU maximum levels; check the current consolidated text. The specification line and the legal limit are separate gates, so the file should show both, and the calculation that connects the drum result to the daily dose. ## Claims and the label The EU Register on nutrition and health claims does not carry an authorised claim for phosphatidylserine; EFSA's 2010 opinion on the submitted claims did not find them substantiated, as of this review. In the US, a structure/function statement needs substantiation and the DSHEA disclaimer. No disease claim is open in either market. This site publishes the specification and makes no health claim. On the label, the source belongs with the ingredient name. In the EU, a product made with the soy material under the Union-list entry must use the designation “Soy phosphatidylserine and phosphatidic acid”; a sunflower product cannot borrow it. In the US, the Supplement Facts panel names phosphatidylserine and the source, for example phosphatidylserine (from sunflower lecithin). The allergen statement is a separate line: soy must be declared when present; sunflower is not a major allergen, but a soy-free claim is about the whole line, not only the ingredient. ## Documents for the file The file needs the COA with PS by HPLC, the total phospholipid profile, loss on drying, heavy metals, microbiology and particle size; peroxide and acid values for an oxidation-sensitive application; and the fatty acid profile that supports the sunflower source. Add the specification, TDS, SDS, source and process description, allergen statement, GMO statement, residual-solvent statement and the origin record. For the EU, add the novel-food assessment or the basis on which the material is placed on the market, and the label designation review. For the US, add the dietary-ingredient basis and, where the use is a conventional food, the GRAS basis. The product page carries the catalog specification; the identity page covers the source evidence; the soy page shows the other feedstock; the methods library describes the assays; the quality page describes the release file. ## Checklist before the first order - Specification version, source and CAS number are named. - PS and total phospholipid figures are on the COA, with the method. - Allergen, GMO, origin and residual-solvent statements are on file. - The contaminant results are converted to the finished-product dose. - The label designation and the claim have been reviewed for the destination. - The source, process and pack are under change control. - The quotation, specification and certificate refer to the same version. Two checks close the file: the source on the certificate matches the source on the label, and the market route matches the source. A sunflower lot cannot inherit a soy entry, and a soy lot cannot be sold as sunflower. ### 06 How we prove a lot is sunflower phosphatidylserine URL: https://nutrition.rainwoodbio.com/products/fatty-acids/phosphatidylserine-sunflower/identity/ Reviewed: 2026-11-20 A sunflower phosphatidylserine lot is the named material when the PS assay, the phospholipid profile, the fatty acid and sterol pattern, and the source record agree. The PS assay alone cannot distinguish sunflower from soy, because the headgroup is the same. The source is proved by the lecithin feedstock and its lipid fingerprint, not by the word on the certificate. In one lineA PS assay cannot tell sunflower from soy; the fatty acid and sterol profile, the phospholipid balance and the source record are what separate them. ## The four identity layers A certificate can name the right material and still fail to prove it. The layers below are separate questions, and each needs its own evidence. Four layers of sunflower PS identity | Layer | Question | Test | What it proves | Document | Are the material and source named? | Name, CAS number, source statement | Paperwork only | Chromatography | Is the phospholipid PS? | HPLC with the phospholipid profile | The headgroup, not the feedstock | Lipid fingerprint | Is the feedstock sunflower? | Fatty acid profile by GC; sterol profile | The plant source, within the method's limits | Mass balance | Is it diluted or oxidised? | PS, total phospholipids, loss on drying, peroxide and acid values | Consistency of the numbers The CAS number 1446756-47-3 identifies the phosphatidylserine molecule; it does not name the plant. Source is a separate specification line and a separate piece of evidence. ## The ratios that carry the evidence The first ratio is PS to total phospholipids. At the catalog limits it is 50 ÷ 70 = 71%. A lot at 55% PS and 70% phospholipids is 79%; a lot at 50% PS and 90% phospholipids is 56%. The ratio moves with the conversion yield and the feedstock, and it catches a powder that meets the PS line by adding a phospholipid carrier or by blending a concentrate down. The second ratio is the fatty acid pattern. Sunflower lecithin is rich in linoleic acid (C18:2) with palmitic and oleic acids, and it carries little or no linolenic acid (C18:3). Soy lecithin carries a measurable linolenic fraction and a different sterol ratio, plus isoflavones that are specific to soy. Report the profile as percentages with the method, not as a qualitative note. The third is the nitrogen-to-phosphorus ratio. PS has one nitrogen in the serine headgroup and one phosphorus in the phosphate, so the molar N:P is about 1:1. A low N:P points to phosphatidic acid or PI; a high one points to an amine carrier or a nitrogen-containing diluent. It is a supporting check, not a source test. The mass balance then ties PS, phospholipids, moisture and the non-phospholipid fraction together. ## X-ray diffraction: what it can and cannot show Plant phosphatidylserine is an amorphous solid, so X-ray diffraction gives a broad halo rather than a sharp pattern. It is not a PS identity test and it does not measure the source. What it can do is show a crystalline component: a sharp pattern where the specification expects an amorphous powder points to a crystalline carrier or a mineral diluent. Use XRD as a limit test for crystalline carriers, not as a release test for PS. If a lot is disputed, the stronger combination is HPLC with the phospholipid profile, the fatty acid and sterol pattern, the PS-to-phospholipid ratio and the mass balance. Ask for the reference pattern and the detection limit before accepting a conforms statement. ## What adulteration looks like Sunflower PS substitutions and the signals | Adulterant | What it does | Signal | Test | Soy PS | Same PS headgroup; different feedstock | Linolenic fraction; sterol ratio; isoflavones | Fatty acid and sterol profile; soy-specific screen | Phospholipid carrier | Meets PS by weight but changes the profile | PS-to-phospholipid ratio shifts | Total phospholipids and profile | Crystalline diluent | Lowers PS per gram | Sharp XRD pattern; ash or mineral residue | XRD; ash; mass balance | Oxidised lipid | Assay may still pass | Peroxide and acid values rise; colour darkens | Peroxide value, acid value, appearance | Moisture | Lowers the as-is PS figure; cakes the powder | Loss on drying high | Loss on drying The hardest case is soy PS sold as sunflower PS, because the PS assay and the phospholipid figure can match. The fatty acid and sterol pattern is the practical discriminator, supported by a soy-specific screen with a stated detection limit. A soy-not-detected line without a limit is not evidence of absence. ## How to write the identity into the specification - “Phosphatidylserine (sunflower lecithin), CAS 1446756-47-3; PS ≥50.0% by HPLC.” - “Total phospholipids ≥70.0%; report the phospholipid profile.” - “Source: sunflower lecithin; fatty acid profile and sterol profile on file.” - “Loss on drying ≤5.0%; peroxide value and acid value reported.” - “Particle size ≥95% through 80 mesh; heavy metals and microbiology as listed.” - “Soy statement: no soy ingredient; cross-contact controls as agreed.” The source line is not decoration. Without it, the specification describes a phosphatidylserine powder that could come from either feedstock. With it, the certificate, the label and the market file can be checked against the same statement. ## Five questions for the supplier - Which lecithin feedstock is this lot, and where was it converted? - Can you provide the HPLC chromatogram and the full phospholipid profile, not only the PS percentage? - What are the fatty acid and sterol results, and do they match a sunflower reference? - What are the peroxide value, acid value and loss on drying for this lot? - If the source is disputed, will you accept a joint re-test on the retained sample? Five direct answers amount to an identity file. A single PS percentage does not. The product page carries the catalog specification; the COA page shows where each figure sits; the grades page covers the grade ladder; the sunflower vs soy comparison covers the source decision; the soy page gives the other specification; the methods library describes the assays; the quality page covers release. ### 01 What the COA for zinc sulfate monohydrate reports URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-sulfate-monohydrate/coa/ Reviewed: 2026-11-20 A zinc sulfate monohydrate certificate lists appearance, zinc and sulfate identification, zinc by complexometric titration at 35.0–38.0%, loss on drying at ≤1.0%, the metals panel, microbiology and mesh. Zinc is the assay on this product; the catalog has no separate purity line written as monohydrate. The LOD line is a surface-moisture gate at the usual drying condition, not the 10.0% water in the formula. In one lineThe zinc figure is the assay on a zinc sulfate monohydrate certificate, and the loss-on-drying line measures free moisture at the usual drying condition, not the 10.0% crystal water the formula carries. ## The certificate as a test report An auditable certificate gives three things per line: what was measured, the method behind the number, and the limit the lot had to meet. A line that says only “conforms” gives a conclusion without the measurement. For a hydrate, the decisive lines are zinc, sulfate and water, because together they name the solid. Release tests for zinc sulfate monohydrate | Test | Method | Limit | Appearance | Visual | White to off-white powder | Identification | Complexometric titration (zinc and sulfate) | Zinc and sulfate conform | Zinc | Complexometric titration | 35.0–38.0% | Loss on drying | Gravimetric, specified drying condition | ≤1.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh Appearance is the least specific line. White to off-white covers the monohydrate, a partly anhydrous lot and a diluted blend. A yellow cast can indicate iron; the metal panel is the quantitative check. ## The basis: zinc, sulfate and the monohydrate scale The formula supplies the arithmetic. ZnSO4·H2O is 179.45 g/mol: 65.38 zinc, 96.06 sulfate, 18.02 water. The percentages are 36.43% zinc, 53.53% sulfate and 10.04% water, and 179.45 ÷ 65.38 = 2.745 g of salt per gram of zinc. Against that, the catalog window of 35.0–38.0% zinc is 96.1–104.3% of the formula. The top of the window means some water has gone; the bottom means extra water or a diluent. The zinc line cannot choose between those, so the sulfate and water results are needed. The LOD test runs at the usual 105 °C. At that temperature the monohydrate keeps its crystal water, which is not released until above 238 °C, so the result is surface moisture. The ≤1.0% limit belongs to that measurement. A total-water figure is a different test and should be ordered separately. A supplier's “purity” figure is ambiguous on this product because there is no assay as monohydrate. Ask whether the number is zinc as-is, zinc on the dried basis, or ZnSO4 content; without the basis it cannot be compared with the catalog. ## Release limit versus batch result A limit is a gate; a result is a measurement. The certificate should show both, in separate columns, with the method named. If the result column simply repeats the range, no measurement has been reported. What the result column should show | Parameter | Limit | Result column | Zinc | 35.0–38.0% | A measured percentage by complexometric titration | Identification | Zinc and sulfate conform | The zinc and sulfate results, not only the word “conforms” | Loss on drying | ≤1.0% | A measured percentage at the stated drying condition | Heavy metals | Per element | A number in mg/kg for every element | Microbiology | Counts and absence | The colony count and the absence result | Particle size | ≥95% through 80 mesh | The percentage that passed the sieve Two quick checks. First, convert the zinc result to the formula scale: 35.0% is 96.1% and 38.0% is 104.3%, so a figure outside the window means another hydrate or another salt. Second, add zinc and sulfate: a pure monohydrate gives 89.96%, and the rest is water, which the LOD line does not measure. A gap that total water does not explain points to a diluent. ## What moves between batches Surface moisture moves first. An open pouch or a humid store raises the LOD, cakes the powder and can fail the sieve while the zinc stays in range. A change of mill or of the 80 mesh screen moves the particle-size result without any chemical change. Iron shows on appearance before it shows on the zinc line. A different zinc feed or purification step can leave a yellow cast, and the metal panel is where it is measured. A zinc result near an edge should also be read against the sulfate: the window is wide enough to hide a dilution at the bottom and an anhydrous fraction at the top. Look at the direction of travel across lots, not one result near an edge: zinc moving up, LOD rising, or a new colour. Keep the code on the certificate tied to the pack and to the retention sample. ## When to order an outside test An outside test makes sense when the source is new, when a lot is the first into a regulated market, when the hydrate is disputed, or when technical grade is suspected. The panel should differ from the certificate: complexometric zinc, a sulfate determination, total water by Karl Fischer or thermogravimetry, ICP-MS, microbiology, and IR or XRD if the hydrate is in question. Every screen should carry a detection limit. “Not detected” without a limit describes the method, not the sample. Keep the tested sample as the retention sample and identify the lot on the report. If a result is challenged, hand the referee the retention sample, the certificate and the specification, and ask for tests that separate the hydrates. ## What to compare between suppliers Six lines make a comparison: hydrate and CAS; zinc and sulfate results; LOD and total water; metals and microbiology; particle size; pack and lot code. Offers that agree on zinc can still describe different solids if the hydrate or the water differs. Traceability is the second layer: who made the lot, where the zinc came from, how it was purified, and the drying and milling history. The catalog data is on the product page; the heptahydrate's figures are on the heptahydrate page; the hydrate tests are on the identity page; the methods are in the methods library; the release steps are described on the quality page. ### 02 Zinc sulfate monohydrate or heptahydrate: the grade decision URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-sulfate-monohydrate/grades/ Reviewed: 2026-11-20 Zinc sulfate monohydrate (ZnSO4·H2O, CAS 7446-19-7) carries 36.4% zinc; the heptahydrate (ZnSO4·7H2O, CAS 7446-20-0) carries 22.7%. They are the same salt at two hydration states, so choosing between them moves the fill weight, the water load and the label calculation, not the purity. The catalog monohydrate is an 80 mesh powder at 35.0–38.0% zinc with LOD at ≤1.0%. In one lineThe monohydrate and the heptahydrate are the same salt at different water content, 36.4% zinc against 22.7%, so the grade decision is a fill-weight and water-load decision, not a purity decision. ## One salt, two hydrates Zinc sulfate takes seven waters when it crystallises. Drying removes six and leaves the monohydrate; more heat removes the seventh and gives the anhydrous salt. The monohydrate is the middle hydrate, and the trade calls it “dried” even though the name describes a process, not a formula. The process name causes trouble. A partly anhydrous lot can be sold as monohydrate and can sit at the top of a wide zinc range, so the certificate's zinc and water results identify the solid better than the drum label. Nor is the choice a purity choice. Both are zinc sulfate; the heptahydrate simply carries more water per gram. The formulator weighs salt, the label declares zinc, so the hydrate belongs in the specification and the zinc figure belongs in the dose. ## The two hydrates side by side Zinc sulfate monohydrate and zinc sulfate heptahydrate | Property | Monohydrate | Heptahydrate | Formula | ZnSO4·H2O | ZnSO4·7H2O | CAS number | 7446-19-7 | 7446-20-0 | Molar mass | 179.45 | 287.55 | Zinc, calculated | 36.4% | 22.7% | Water, calculated | 10.0% | 43.9% | Salt per gram of zinc | 2.75 g | 4.40 g | Form | White to off-white powder | Colourless crystals or white powder | Mesh | ≥95% through 80 mesh | ≥95% through 40 mesh The factor is 36.4 ÷ 22.7 = 1.60. A 25 kg drum of monohydrate holds about 9.1 kg of zinc; the heptahydrate holds about 5.7 kg. The monohydrate is the more concentrated grade, and the fill weight follows that concentration. ## Powder, water and flow The catalog powder is white to off-white at 80 mesh; the heptahydrate comes as colourless crystals or a white powder at 40 mesh. The finer monohydrate dissolves and disperses quickly but dusts and compacts more easily. Granulated material is available on request when flow matters. Both are hygroscopic and both solutions are acidic. The monohydrate adds about 10 g of water per 100 g to a blend; the heptahydrate adds about 44 g. That difference matters with a moisture-sensitive active or a carbonate, and the acidity matters for taste, carbonate reactions and mild-steel contact. The monohydrate is not the anhydrous salt. Its water is held until above 238 °C, so a 105 °C LOD reads surface moisture rather than the 10.0% in the formula. That is how a one-tenth-water material can carry a ≤1.0% LOD limit. ## Zinc arithmetic and the label The label declares zinc, so the weigh-up starts from zinc. At the calculated figures, 10 mg of zinc is 27.5 mg of monohydrate or 44.0 mg of heptahydrate; 15 mg is 41.2 mg or 66.0 mg. These are examples of the arithmetic, not an intake recommendation. The EU reference intake is 10 mg zinc per day, so 10 mg is 100% of the nutrient reference value; the US daily value is 11 mg. The finished dose is checked against the destination's upper level, and that check uses elemental zinc. The salt weight changes the dosage form. The monohydrate needs about 62% of the heptahydrate weight for the same zinc, which can free space for another ingredient or shrink the capsule. A straight swap is the error: 44.0 mg of monohydrate gives 16.0 mg of zinc against a 10 mg label, and 27.5 mg of heptahydrate gives 6.3 mg of zinc. ## Specification lines for the monohydrate - “Zinc sulfate monohydrate, CAS 7446-19-7, ZnSO4·H2O.” - “Zinc 35.0–38.0%, complexometric; state the basis.” - “Zinc and sulfate conform on identification.” - “LOD ≤1.0% at the named condition; total water on request.” - “80 mesh powder, ≥95% through; granulated on request.” - “Metals and microbiology per the catalog; report each element.” - “Hydrate fixed on the order; no substitution without change control.” This page covers the monohydrate. The heptahydrate has a different zinc range, water range and mesh, and it cannot replace the monohydrate at the same weight. A change of hydrate goes through change control with a new fill weight and label check. ## When the other grade is the wrong choice Do not keep a heptahydrate fill and switch to the monohydrate: the capsule would carry about 60% more zinc than declared. The reverse is also a label failure: a monohydrate fill used as heptahydrate gives about 37% less zinc, and every release test on the salt can still pass. The heptahydrate is the right choice when the formula and fill already assume 22.7% zinc and a change would reopen the label. The monohydrate is the right choice when fill space or water load is the constraint. Neither is a purity upgrade. The monohydrate product page carries the catalog data. The heptahydrate page carries its own figures; the level-four comparison takes the water and label arithmetic further; the COA page shows how the zinc result is reported; the methods library covers titration and water; the quality page covers release. ### 02.1 Zinc sulfate monohydrate vs heptahydrate: water, zinc and the label URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-sulfate-monohydrate/grades/zinc-sulfate-monohydrate-vs-heptahydrate/ Reviewed: 2026-11-20 A gram of zinc sulfate monohydrate contains 0.364 g of zinc; a gram of the heptahydrate contains 0.227 g. The monohydrate is the more concentrated form by a factor of 1.6 because it holds one water molecule instead of seven. The label still declares elemental zinc, so a switch has to be worked through the fill weight, not by leaving the label figure alone. In one lineA gram of the monohydrate delivers 0.364 g of zinc against 0.227 g from the heptahydrate, so a straight weight-for-weight switch raises the zinc in the capsule by about 60%. ## Two hydrates, one salt Both grades are zinc sulfate; the difference is hydration. The monohydrate is ZnSO4·H2O (CAS 7446-19-7, 179.45 g/mol); the heptahydrate is ZnSO4·7H2O (CAS 7446-20-0, 287.55 g/mol). The six extra waters account for the mass difference and for the fact that the two cannot be exchanged gram for gram. “Dried zinc sulfate” is a trade name, not a formula. It normally means the monohydrate, but a partly anhydrous lot can still be sold under the name and can sit inside a broad zinc range. The certificate's zinc and water results describe the solid better than the drum label does. The solids also age differently. The heptahydrate effloresces in dry air at room temperature, shedding surface water; the monohydrate keeps its single water until above 238 °C. That is the reason a monohydrate sheet can show LOD at ≤1.0% while the formula holds 10.0% water. ## The zinc figure per gram How the zinc figure changes with the hydrate | Measure | Monohydrate | Heptahydrate | Zinc per gram of salt | 0.364 g | 0.227 g | Salt needed for 10 mg zinc | 27.5 mg | 44.0 mg | Salt needed for 15 mg zinc | 41.2 mg | 66.0 mg | Water per 100 g of salt | 10.0 g | 43.9 g | Zinc in a 25 kg drum | 9.1 kg | 5.7 kg The ratio 0.364 ÷ 0.227 = 1.60 is the conversion. The monohydrate is not a purer grade; it is a drier one, and the zinc per gram is higher for that reason. Because the catalog range is 35.0–38.0%, a label calculation should use the batch result, not the 36.4% theoretical figure. The same arithmetic works in reverse. If the fill weight is fixed by the capsule or the tablet, the monohydrate delivers more zinc in that weight; if the zinc dose is fixed, the monohydrate needs less powder. Both are valid, but the change has to be written down. ## What the water does in the formula Water is the practical difference in a blend. A monohydrate adds about 10 g of water per 100 g of salt; the heptahydrate adds about 44 g. A moisture-sensitive active, a carbonate or a hygroscopic vitamin sees more than four times the water load from the heptahydrate, even though both are sold as dry powders. The water also moves between the salt and its surroundings. The heptahydrate gives up surface water in a dry store and takes it back in a humid one; the monohydrate is less mobile but still hygroscopic. A change of hydrate can change flow, caking and water activity, so stability work belongs to the formula as well as to the salt. Read the water lines carefully. On the monohydrate, ≤1.0% LOD is free moisture, not the 10.0% crystal water. On the heptahydrate, the 43–46% Karl Fischer figure is the crystal water itself. The numbers are not comparable, and a certificate that reports only LOD gives the total water of neither. ## Fill weight and the capsule Start from the label: 10 mg of zinc. Divide by the zinc fraction: 10 ÷ 0.364 = 27.5 mg of monohydrate, or 10 ÷ 0.227 = 44.0 mg of heptahydrate. At 15 mg the figures are 41.2 mg and 66.0 mg. The difference is capsule space and the excipient needed to reach a workable fill. The error to avoid is a straight swap. Keep the 44.0 mg fill and switch to the monohydrate, and the capsule carries 44.0 × 0.364 = 16.0 mg of zinc where the label says 10 mg, about 60% high. Reverse it and 27.5 mg of heptahydrate carries 6.3 mg, about 37% low. The salt can pass release in both cases; the finished product is what misses. Small doses bring a second issue: a 27.5 mg load inside a 500 mg capsule is a small share of the fill, so uniformity and carrier choice matter more than at 44.0 mg. A tablet made by direct compression also needs its weight and hardness targets reset. ## What the label declares The label carries elemental zinc, not the hydrate. EU labelling puts “zinc sulphate” in the ingredient list; the zinc mass and the percentage of the 10 mg reference intake sit in the nutrition declaration. US labelling puts “Zinc (as zinc sulfate)” in the Supplement Facts panel, with the elemental mass and the percentage of the 11 mg daily value. The hydrate need not appear on either label; the specification and the COA carry it. So a 10 mg claim can be met by 27.5 mg of monohydrate or 44.0 mg of heptahydrate. Both labels are correct; the capsules differ. The hydrate is a specification detail, repeated on the certificate and in the change record; the consumer sees only the zinc figure. The destination rules apply on top. EFSA sets a tolerable upper intake level of 25 mg zinc per day for adults; the US level is 40 mg. An authorised EU zinc claim has its own condition, usually that the food is a source of zinc at 15% of the reference value per portion. The reviewer checks the claim against the finished dose, which is elemental zinc. ## What a switch requires A change of hydrate is a change of material. Recalculate the fill with the batch zinc figure, not the theoretical one. Check blend flow, tablet weight and hardness, capsule fill and blend water, and repeat stability if the pack or storage humidity changes. Revise the specification, the bill of materials and the change-control record, and reissue the artwork if the zinc mass moves. Retain samples of both hydrates so a disputed fill can be checked. A gram-for-gram swap is not neutral: it adds about 60% zinc one way and removes about 37% the other. The monohydrate page has the catalog specification; the heptahydrate page has the other figures; the grades page puts this comparison in the context of the range; the COA page shows how zinc and water are reported; the methods library covers titration and water; the quality page covers release and change control. ### 03 Zinc sulfate monohydrate: moisture, caking and the pack URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-sulfate-monohydrate/stability/ Reviewed: 2026-11-20 Zinc sulfate monohydrate does not break down on storage; it picks up water. The powder is hygroscopic and cakes, and the solution is acidic enough to attack mild steel. How long it lasts depends on the pack, the humidity and the handling, so a shelf life is assigned to a pack rather than to the salt in general. In one lineZinc sulfate monohydrate does not decompose on the shelf; it takes up moisture, cakes and gives an acidic solution, so the pack and the storage condition set the shelf life. ## The powder: free moisture and caking The catalog's ≤1.0% loss on drying is a surface-moisture gate. The monohydrate's single water molecule is held until above 238 °C, so a 105 °C test does not drive it off; the 10.0% in the formula stays out of that result. What the test does catch is the water the powder takes from the air. Surface water is the practical enemy. An opened pouch or a drum in a humid bay takes water at the particle surface, the LOD climbs, bridges form and the powder cakes. A caked drum has not failed chemically; it is a pack that has let water in, and the sieve and LOD results show how far it has gone. Keep the pack closed. The foil pouch is the moisture barrier for the 1 kg unit, and the fiber drum depends on its liner. Close the liner, keep the drum off a wet floor, and note the opening date. A desiccant helps in a humid climate but does not replace a seal. ## The solution: acidic, corrosive and not self-preserving The salt dissolves freely and the solution is acidic. That acidity attacks mild steel and galvanised surfaces, changes the taste of a drink, and releases carbon dioxide from carbonate or bicarbonate salts. Holds should use stainless steel, plastic or glass, and every excipient should be checked before the first mix. Raising the pH precipitates zinc as hydroxide, phosphate or carbonate. That is a formulation limit, not a storage failure, and it is why a zinc sulfate drink is kept acidic. A clear, colourless solution is expected; haze or a tint points to iron, oxide or a precipitate. A zinc sulfate solution is not self-preserving. The water activity is high and the salt does not stop every organism, so a liquid needs a validated hold time, a preservative or a filtration step, and a micro test at release. Powder data cannot stand in for a beverage test. ## What drives change during storage Factors that move zinc sulfate monohydrate during storage | Factor | Effect | Control | Relative humidity | Water at the surface; caking; LOD rises | Foil pouch or drum liner; dry store | Temperature | Speeds moisture movement and caking | Controlled store; cool process | Compaction | Pallet load and vibration set the powder | Stack height; granulated grade | Acidity | Attacks mild steel; reacts with carbonates | Stainless or plastic contact; compatible excipients | Iron contact | Colour and haze from iron pickup | Lined or stainless equipment | Microbial growth | Solution only; the dry powder does not support growth | Hold time; preservative; filtration The factors reinforce each other. Warm and humid together are worse than either alone, and a caked powder that is milled can fail the sieve even when the zinc result is unchanged. The question is not whether the salt is stable but which pack, under which storage condition, for how long. ## A stability protocol for the ingredient A storage programme normally pairs 25 °C/60% relative humidity (long term) with 30 °C/65% (intermediate) and 40 °C/75% (accelerated). For this salt, add a humidity challenge: caking can appear before any chemical change, and the standard conditions may not reach the failure mode. At each point, test zinc, LOD, appearance, microbiology and mesh or flow. For a solution or a drink mix, repeat the work in the matrix at the process pH and heat load, and test pH, appearance, zinc and microbiology. Report the individual results, not only a pass verdict, and identify the pack and lot family. Ask for data on the pack you will buy. A 25 kg drum and a 1 kg pouch differ in headspace, opening history and surface-to-volume ratio, so one pack's result does not answer for the other. ## The finished formula changes the answer A capsule or tablet starts dry, but the shell and excipients can still hand moisture to a hygroscopic fill. Check LOD and appearance at release and after storage, and watch tablet hardness if the powder gains water. A stick pack is only as good as its seal: one pinhole is enough, and the strip is checked as well as the powder. A drink mix pairs the acid salt with flavour and often a carbonate. Any water present will start the reaction, so the powder must stay dry and the stick must be sealed. A tablet also needs a taste check and a look at tooling corrosion if the process uses water. An overage cannot fix a pack that lets water in. Whether to add one is a label and process decision, separate from the pack specification. ## How the shelf life is set No single shelf-life figure is published for this salt, because the number depends on the pack and the store. The retest period is written into the specification and backed by data for that pack. A number that does not name the pack, the storage condition and the tests is not a shelf life. At the end of the retest period, re-test the retention sample before extending use; do not assume an extension or move a bulk figure to a repacked container. The product page lists the packs; the COA page covers release tests; the MOQ page covers pack sizes and lead time; the methods library describes the assay and water methods; the quality page describes release and retest. ### 04 Zinc sulfate monohydrate: MOQ, packs and lead time URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-sulfate-monohydrate/moq/ Reviewed: 2026-11-20 Zinc sulfate monohydrate starts at 1 kg in a foil pouch; production material comes in a 25 kg fiber drum. Standard packs dispatch in 1–7 days, and a granulated grade is quoted as a separate item. A comparable offer names the hydrate, the zinc range, the pack, the destination, the documents and the intended market. In one lineA one-kilogram pouch is the entry pack because it can be tested and traced as a single lot; the 25 kg drum is the production unit and carries the same specification. ## Why the entry pack is 1 kg One kilogram is a qualification quantity. It leaves enough material for identity, zinc, moisture and microbiological tests, a retention sample and a bench trial, and it can travel as a parcel before the production plan is fixed. The pouch is a lot in its own right, with a code that ties the certificate to the powder. Taking less than a kilogram usually means a repack from a drum. That step breaks the original pack identity, adds handling and makes the sample harder to trace, without changing the salt. The drum is the production unit: it cuts handling per kilogram but ties up stock and storage time. Neither pack is a discount tier. ## Packs and formats Packs and formats for zinc sulfate monohydrate | Pack or format | Size | Typical use | Notes | Foil pouch | 1 kg | Qualification, trial | Heat-sealed; close tightly after use | Fiber drum | 25 kg | Production | Liner sealed; code on drum and liner | Standard powder | 80 mesh | Catalog form | ≥95% through 80 mesh | Granulated | Quoted on request | Flow or dust control | A different particle-size specification The catalog material is white to off-white at 80 mesh. Granulation changes the particle profile, so it is a new specification line rather than a packing option. A carrier blend changes the zinc per gram and is a different material again; it cannot be ordered as the same powder in another bag. ## Lead time and dispatch Standard material leaves 1–7 days after the order is confirmed. That window covers picking, paperwork and handover to the carrier; transit, customs and the customer's quality release sit outside it. A granulation or a special document set adds time, and the offer should show it separately. Ask for a dispatch date, not a range. The pouch travels as a parcel; the drum travels on a pallet. The Incoterm decides who books the freight and who clears import, and the lot documents belong in the same shipment as the material. ## What a quotation needs Six answers make an offer comparable: - Hydrate. Zinc sulfate monohydrate, CAS 7446-19-7; “zinc sulfate” alone is not enough. - Specification. Zinc range, loss on drying, mesh, heavy metals and microbiology. - Pack. 1 kg pouch, 25 kg drum, or granulated material. - Destination. Country, address or port, and the Incoterm. - Documents. COA, TDS, SDS and any statement the importer needs. - Use and market. Supplement, food or another application, and where it will be sold. An offer that omits the hydrate or the market cannot be compared. Zinc sulfate can mean the monohydrate, a partly anhydrous powder or a blend, and the destination changes the paperwork. A quotation that gives only a zinc percentage has not described the material either: the LOD, the mesh and the pack belong in the offer. Commercial terms are not published here; they appear on the quotation. ## What the sample has to prove The first pouch is the qualification lot. Test identity, zinc, LOD, mesh and microbiology on it, and retain a portion from the same pack. The lot code has to connect the sample, the certificate and the offer; without that link the sample says nothing about the production drum. A trial below one kilogram is a repack. It is drawn from a drum lot, logged as a separate handling step, and is not the 1 kg catalog pouch. Put the split in writing and keep its code with the trial data. The bench powder and the production powder may be different lots even when the specification matches. ## Terms to settle before the first order Keep the commercial and quality terms in one place: Incoterm, pack, dispatch window, specification revision, COA per lot, retention sample, retest period and the change route. Name the pack on the purchase order as well as the specification; a line that says only “25 kg” can mean a drum or a set of pouches. A quality agreement signed before the first order is easier than an argument after it. If a lot fails the agreed specification, the evidence is the retention sample and a joint retest by the named method, not a picture of the container. Agree in advance who bears the referee laboratory's charge and which laboratory is acceptable to both. A return based on appearance alone is hard to defend. The product page carries the catalog data; release tests are on the COA page; market files are on the compliance page; the MOQ glossary defines the term; the logistics page covers freight and documents. ### 05 The regulatory file for zinc sulfate monohydrate URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-sulfate-monohydrate/compliance/ Reviewed: 2026-11-20 Zinc sulfate monohydrate is accepted as a zinc source in EU food supplements, is GRAS and is used as a dietary ingredient in the US, and is a long-established mineral salt elsewhere. The specification and the COA describe the material; the source listing, dose ceiling and label rule are destination decisions. The buyer's regulatory team signs off the route for the finished product. In one lineThe specification is the supplier's statement about the salt; the regulatory file is the destination's statement about the source, the dose and the label. ## What the regulatory file holds Four things belong in the file: the specification version, the lot certificate, the destination route with its dose and label rules, and the change-control record for source, process and pack. The COA belongs to the lot, the TDS to the specification and the SDS to handling; the destination route is none of the three. Grade matters. A technical-grade lot can pass zinc and fail the metal panel, so the order should say food grade and the certificate should show each element. The finished format also matters: a capsule, a powder blend and a drink are reviewed under different rules even with the same salt. Zinc sulfate is long established, not a novel ingredient, but the source listing, maximum level and claim wording are still checked market by market. This page is a map, not a legal opinion. ## European Union EU food-supplement law lists zinc sulphate in Annex II of Directive 2002/46/EC, so it can be used as a zinc source. The nutrition declaration uses the zinc reference intake of 10 mg per day from Regulation (EU) No 1169/2011. The EU notes collect the framework references. Maximum levels for vitamins and minerals in supplements are not harmonised across the EU as of this review; several member states set their own. The buyer's team confirms the destination rule before the artwork is fixed. Contaminants are harmonised by Regulation (EU) 2023/915, which sets lead, cadmium and mercury limits for the supplement as sold, subject to exceptions. The UK is two regimes: Great Britain applies retained GB rules and the GB claims register, while Northern Ireland follows the EU framework. The delivery address decides which one applies. ## United States In the US, 21 CFR 182.8997 lists zinc sulfate as GRAS for use under good manufacturing practice, and the salt is also used as a dietary ingredient. The Supplement Facts panel gives the zinc mass and its percentage of the daily value; the daily value is 11 mg for adults and children from four years up. The US notes collect the references. Adults have a tolerable upper intake level of 40 mg zinc per day from all sources. A structure/function claim needs substantiation and the DSHEA disclaimer, and a disease claim is not available. Supplement and food uses are separate files, and a lot documented for one is not automatically documented for the other. ## Zinc and contaminant limits The contaminant panel is calculated on the finished product, not only on the drum. The table is a starting point; the current destination text and the dose settle the figure. Contaminant limits to check against the finished product | Parameter | Usual reference | What the file needs | Lead (Pb) | 3.0 mg/kg in the finished product | Result, method, limit and the dose calculation | Cadmium (Cd) | 1.0 mg/kg in the finished product | The lot result and the category exception, if one applies | Mercury (Hg) | 0.10 mg/kg in the finished product | Result and method for the lot | Arsenic (As) | Customer or market limit | The limit both sides agreed, with the method Zinc is a nutrient ceiling, not a contaminant. EFSA sets a tolerable upper intake level of 25 mg zinc per day for adults; the US level is 40 mg. Convert the salt with the batch zinc result, not the 36.4% theoretical figure: 100 mg of a 36.0% lot gives 36.0 mg of zinc, so an assumption of 36.4% overstates the dose. The ceiling applies to the sum of zinc sources in the formula; a product close to the EFSA level has little room for a second source in the same serving. ## Label and claims An EU label lists the source as “zinc sulphate” and gives the zinc mass and the percentage of the 10 mg reference intake in the nutrition declaration. The EU claims register holds authorised zinc claims, including immune function and skin, each with a condition, usually that the food is a source of zinc at 15% of the reference value per portion. Check the register entry, not the marketing copy. In the US, “Zinc (as zinc sulfate)” appears in the Supplement Facts panel, with the mass of elemental zinc and the percentage of the 11 mg daily value. A structure/function statement is allowed with substantiation and the DSHEA disclaimer; a disease claim is not. The hydrate is not required on the label but belongs in the specification, because “zinc sulfate” can mean either hydrate and the fill weight reveals which. This page is specification information, not a health claim. The brand's reviewer matches the wording to the product, the form and the market; the certificate supports the material, not the sentence. ## Documents for the file The file needs the specification (hydrate, CAS, zinc range, LOD, mesh), a COA per lot with individual metals, the SDS and TDS, a food-grade statement, an allergen statement, a GMO statement, the country of origin and the packaging declaration. A residual-solvent statement is not central for an inorganic salt, but the file should record that the question was asked. The source and process description, the change-control record and the lot code complete the set. Put an up-to-date document list at the top of the folder and make sure the quotation, the specification and the certificate carry the same version. Analytical evidence is on the identity page; the release file is described on the quality page. ## Checklist before the first order - Specification version, hydrate and CAS number are named. - The COA, TDS, SDS, food-grade, allergen, GMO, origin and packaging statements are present. - Contaminant results are recalculated on the finished-product dose. - The zinc dose is checked against the destination's upper level. - Label and claim wording have been checked for the destination. - Change control covers source, process and pack. The catalog specification sits on the zinc sulfate monohydrate product page; the market notes are in the regulatory library. ### 06 How to prove a zinc sulfate lot is the monohydrate URL: https://nutrition.rainwoodbio.com/products/minerals/zinc-sulfate-monohydrate/identity/ Reviewed: 2026-11-20 A monohydrate lot is identified by agreement, not by one number: the document names CAS 7446-19-7, complexometric titration returns 35.0–38.0% zinc, a sulfate determination confirms the anion, a water determination fits the monohydrate rather than the heptahydrate, and IR or X-ray diffraction matches the monohydrate reference. Zinc alone cannot separate the hydrates, because the heptahydrate returns 22.7% and the anhydrous salt 40.5%. In one lineA monohydrate lot is proved when the zinc, sulfate and water results agree and the solid-state pattern matches, not by a single zinc percentage. ## Identity evidence, layer by layer A name on a certificate is a claim; the tests are the evidence. The table separates the questions. A supplier who answers only the first question has described the label, not the drum. What each identity test establishes | Evidence | Question it answers | Method | What it establishes | Paperwork | Does the document name the hydrate? | Name, CAS, formula | Only the label | Zinc | Is the zinc figure right? | Complexometric titration | Zinc content, not hydration | Sulfate | Is the anion sulfate? | Titration or gravimetric sulfate | Confirms the salt and balances the mass | Water | Is it the monohydrate? | Total water, plus LOD for free moisture | Hydration state | Crystal | Is the solid the monohydrate? | IR; XRD for a dispute | The hydrate in the drum The catalog identity is a conformity statement: zinc and sulfate conform. It is a workable release gate, but it does not put a number on the sulfate or the water. If the hydrate is challenged, ask for those numbers and for the diffraction pattern. ## What the zinc, sulfate and water figures should show The formula sets the expected figures. Pure ZnSO4·H2O contains 36.43% zinc, 53.53% sulfate and 10.04% water. Zinc and sulfate are present in a 1:1 molar ratio, which is a mass ratio of 36.43 ÷ 53.53 = 0.681. One gram of zinc corresponds to 179.45 ÷ 65.38 = 2.745 g of salt. The catalog window of 35.0–38.0% zinc maps to 96.1–104.3% of the monohydrate formula. A result at the top means less water than the formula; a result at the bottom means more water or a diluent. That is why the zinc line is read with the sulfate and the water, not alone: high zinc with low water suggests an anhydrous fraction, low zinc with normal sulfate suggests a diluent, and high water with low zinc suggests surface moisture. The water line needs a note. The catalog's LOD is a free-moisture test; the monohydrate keeps its crystal water until above 238 °C, so the 10.0% does not show up there. To prove the hydrate by mass balance, order total water as a separate determination. A hydrate blend shows the same way. Monohydrate plus anhydrous salt can sit inside the zinc window while its total water falls with the anhydrous share; adding sodium sulfate lowers zinc and introduces sodium. Zinc reports the element, sulfate reports the anion, water reports the hydrate. ## IR and diffraction: checking the solid IR is the usual release check: it is quick, and it sees the sulfate and water bands together. With a reference it can distinguish the monohydrate from the heptahydrate, though the spectra are close and a library hit is only as reliable as the library. Name the reference and the band region. X-ray diffraction is more direct: does the solid give the monohydrate pattern? Each solid has its own unit cell, so the peaks sit in different places and a mixture shows both sets. XRD does not measure purity or water, but it is direct evidence that the crystal is the hydrate named on the sheet. A match needs the reference pattern and a detection limit. A report that says only “XRD conforms”, with no pattern and no reference, adds little. Order it when a hydrate claim is challenged, or when two sources are being weighed for a specification change. ## What substitution looks like Hydrate and grade substitutions, and how they show | What goes wrong | How the figures move | Signal | Test | Heptahydrate supplied as monohydrate | Zinc falls; total water rises | Zinc near 22.7%; water high | Titration, total water, XRD | Anhydrous salt blended in | Zinc rises; total water falls | Zinc above 38.0%; water low | Titration, total water, XRD | Sodium sulfate added | Zinc falls; sodium rises | Sodium present; sulfate near normal | ICP-OES, mass balance | Magnesium sulfate substituted | Zinc falls; magnesium rises | Magnesium present; different pattern | ICP-OES, XRD | Zinc oxide blended in | Insoluble zinc; sulfate falls | Hazy solution; sulfate below 53.5% | Solubility, sulfate, XRD | Technical grade | Heavy metals rise | Pb, Cd or As over the limit | ICP-MS on the lot | Free water | LOD climbs; caking | LOD over 1.0%; sieve blocked | LOD, sieve, flow Zinc sulfate is a commodity, so the usual problems are grade and hydrate rather than a clever fake. A technical grade can pass zinc and fail the metals; a heptahydrate can pass a wide zinc window and fail the water. Colour is the weakest clue: white to off-white covers every hydrate, and a yellow tint points to iron. ## Identity lines for the specification - “Zinc sulfate monohydrate, CAS 7446-19-7, ZnSO4·H2O.” - “Zinc 35.0–38.0% by complexometric titration; name the basis.” - “Zinc and sulfate conform; report the sulfate result.” - “Loss on drying ≤1.0%; total water by Karl Fischer on request.” - “IR versus a named reference; XRD if a dispute arises.” - “Heavy metals by ICP-MS, element by element; microbiology as listed.” - “No hydrate or grade change without written change control.” ## Five questions to settle before approval - What hydrate is this, and which CAS number is printed on the certificate? - What zinc and sulfate results were obtained, and by which methods? - What is the total water, and does the mass balance close? - May we see the IR spectrum and, if needed, an XRD pattern with its reference? - If the lot is challenged, will you join a retest of the retention sample? An identity file is these answers together. One zinc percentage is not the file. The product page has the catalog data; the heptahydrate page has the other hydrate's figures; the COA page shows where each result sits; the grades page compares the two; the methods library covers titration, water and diffraction; the quality page covers release and retest. ### 01 What the COA for adenosylcobalamin actually contains URL: https://nutrition.rainwoodbio.com/products/vitamins/adenosylcobalamin/coa/ Reviewed: 2026-11-20 The number that matters on an adenosylcobalamin certificate is the assay, but the number cannot stand alone. The certificate has to name the standard the HPLC ran against, state whether the percentage is as-is or dried, and show the moisture figure that connects the two. Without those three items the percentage is a result without a subject. In one lineThe assay is a figure about the adenosyl form: it needs the HPLC standard named, the basis stated beside the loss on drying, and a spectrum that shows the adenosyl ligand rather than another cobalamin. ## The certificate as a test report Read the identity rows before the assay row. Adenosylcobalamin is defined by the 5'-deoxyadenosyl group on the cobalt, and a retention time without a spectrum can belong to methylcobalamin or cyanocobalamin. The certificate should report the retention, the UV-Vis maxima and the reference standard, so the reader can see which molecule was measured. An assay row that says “≥95.0%” and nothing else hides its basis. Loss on drying is the other half of the statement, because the same powder reads differently as-is and on the dried basis. Release tests for adenosylcobalamin · catalog specification | Parameter | Method | Release limit | Appearance | Visual | Red-orange to dark red, crystalline powder | Identification | HPLC retention and UV-Vis spectrum | Conforms to the adenosylcobalamin reference | Assay | HPLC with UV detection | ≥95.0% | Loss on drying | Gravimetric | ≤10.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh ## Assay basis, water and the identity standard The catalog gate is ≥95.0% by HPLC, and the specification does not fix a basis. That is workable only if the certificate states one. Take a powder at 90.5% as-is with 5.0% water: the dried-basis calculation is 95.3%, so the same data pass or fail depending on the column heading. Buyer and supplier should agree the basis in writing before the first lot. A 1,000 µg serving weighs about a milligram, which makes the as-is figure the one that sizes the fill; the dried figure is a release convention. Both are useful, and neither replaces the moisture result. The identity standard has to be adenosylcobalamin, not a generic B12 standard. In neutral solution the spectrum shows bands near 260, 375 and 522 nm, and the 375 nm band separates this form from methylcobalamin (342 nm) and cyanocobalamin (361 nm). ## Release limit versus batch result A specification limit and a measured result are two different statements. The limit is the boundary the lot had to meet; the result is what the laboratory found. A certificate that prints the limit in the result column has reported the gate, not the sample. What the result column should contain | Parameter | Release limit | Result column | Assay | ≥95.0%, basis stated | A measured percentage with the basis and the standard named | Loss on drying | ≤10.0% | A measured percentage | Identification | Conforms to the reference | Retention time, spectrum and the ratios used | Heavy metals | Per element | A measured figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot | Particle size | ≥95% through 80 mesh | The measured percentage through the sieve The result column should let a reader rebuild the pass decision: a number and unit for each metal, a colony count plus an absence statement for the micro tests, and an assay figure with its basis. A single “passes specification” line is a conclusion without the route to it. ## What moves between batches Between lots, the final step and crystallisation move colour and assay, drying moves moisture, and the mill moves the 80 mesh fraction. None of these changes is automatically a defect; the trend across lots is what deserves attention. Light is the variable specific to this molecule. The adenosyl group can be lost at the powder surface during sampling, so a certificate from a lot sampled under bright light may show a lower assay than the drum would have given. Ask how the sample was handled, and keep the retained portion in the dark. A colour shift from red-orange toward dark red is weak evidence, because the photoproduct is red too. An extra peak in the cobalamin profile or a falling assay across consecutive lots is stronger. Trace the lot code from certificate to pouch, drum and retain sample. ## When an outside test is worth ordering Order an outside panel when the source is new, the destination is regulated, the form is disputed or the lot has a light-exposure history. The panel should include HPLC with an adenosyl standard and a UV-Vis spectrum, the cobalamin profile, loss on drying, ICP-MS metals and microbiology. Cobalt by ICP-OES sits near 3.7% for this molecule, lower than methylcobalamin at about 4.4%, so a result near 3.7% supports the identity and catches dilution. It does not replace the chromatogram: the ligand is what the method has to show. Ask for the detection limit behind every “not detected” and keep the tested portion as the retained sample. A report without a lot code and a detection limit is difficult to defend later. ## What to compare between suppliers Compare six fields: CAS number, assay and basis, identity standard and spectrum, loss on drying, cobalamin profile, and pack plus lot code. A quotation that leaves out the standard or the basis cannot be compared with one that states them. Look at traceability next: the manufacturer, the process and drying steps, and the light barrier on the pack. The catalog specification sits on the adenosylcobalamin product page; the form tests are on the identity page; the market questions are on the compliance page; the HPLC method is in the methods library; the release workflow is on the quality page. ### 02 Adenosylcobalamin grades: crystal, granulation and the fill URL: https://nutrition.rainwoodbio.com/products/vitamins/adenosylcobalamin/grades/ Reviewed: 2026-11-20 The catalog supplies adenosylcobalamin as an 80 mesh crystalline powder; a granulated version is available on request, and a carrier dilution is a separate project. The grade question is really a filling question. A 1,000 µg dose is one milligram of active, so the crystal can be weighed for a premix, but a 100 µg dose in a 400 mg capsule usually needs a dilution to distribute it evenly. In one lineThe grade is a handling decision: the crystal suits a milligram weigh-up, a granulation suits flow on the line, and a microgram dose needs a dilution whose carrier is declared. ## Why adenosylcobalamin is sold in more than one grade There is no purity ladder here. Crystal, granulated crystal and dilution contain the same molecule; they differ in particle size and in what else is in the scoop. The crystal is the reference grade, granulation is a flow fix, and a dilution is a dosing aid with a declared carrier. Handling pushes the choice as much as dose does. Adenosylcobalamin is hygroscopic and loses its upper ligand under light, so a grade that reduces openings and transfers has value beyond its certificate. Granules flow better and raise less dust; a dilution removes many tiny weigh-ups from the line. ## The grades side by side Adenosylcobalamin grades and the adjacent methylcobalamin product | Grade | What it is | Assay | Typical use | Label effect | Crystal, 80 mesh | Pure crystalline powder | ≥95.0% by HPLC | Milligram weigh-up or premix | Ingredient named as adenosylcobalamin | Granulated crystal | Coarser particle, no carrier | ≥95.0% by HPLC | Flow and dust control | Same name; particle size changes | Carrier dilution | Active on a food-grade carrier | Declared per gram | Microgram doses and small fills | Carrier is an ingredient | Methylcobalamin | A different coenzyme form | 98.0–101.0% by HPLC | Separate product | Different ingredient name The last row is not a grade. Methylcobalamin is a different cobalamin with a different CAS number, standard and label name, and its assay range is not a higher setting of the same gauge. The catalog itself covers the crystal and the granulated form; a dilution is quoted as its own brief. ## The physical facts that decide handling The crystal is red-orange to dark red and ≥95% passes 80 mesh. Water solubility is slight, and a red solution forms at low concentration; a more concentrated stock may need warming or pH adjustment. Moisture is capped at 10.0% at release, and the powder belongs in a foil or opaque pack between uses. Assay says nothing about flow. If the line is sensitive to bulk density or dust, request the lot figures and discuss granulation; the 80 mesh line describes the standard powder, not a guarantee for every filling machine. ## Dose arithmetic and the fill At 100% assay, 1,000 µg is 1.0 mg; at 95.0% it is about 1.05 mg. A 500 µg serving is half that, and 100 µg is about 0.1 mg. These weights are small against the fill, so the active normally enters through a premix or a dilution. The label declares the vitamin B12 figure, not the powder weight. A dilution has its own specification: carrier identity, active content per gram, uniformity at the low dose and a link to the crystal lot. The carrier appears in the ingredient list. A clean-label product may keep the crystal and make the premix in-house, provided the uniformity is validated. ## What to write into the specification - “Name: adenosylcobalamin; CAS 13870-90-1; formula C72H100CoN18O17P.” - “Purity: ≥95.0% by HPLC, run against an adenosylcobalamin reference standard; state as-is or dried.” - “Identity: HPLC retention plus UV-Vis; record the maxima and the absorbance ratios.” - “Water: loss on drying ≤10.0%; metals and microbiology per the catalog panel.” - “Size: ≥95% through 80 mesh; granulation is quoted separately.” - “Pack: foil or drum with a light and moisture barrier; storage condition in the contract.” - “Market: confirm the permitted-form route before the purchase order.” ## When the crystalline grade is the wrong buy Do not start with the crystal when the serving is a few hundred micrograms in a direct-compression capsule: the weigh-up is too small to spread evenly. Do not use it in a clear aqueous drink without a light and solution study. Do not offer it for a market whose file names another B12 form. Conversely, do not accept a dilution when the label must carry no carrier, and granulation is not a packing note. Each is a specification change with its own carrier or particle-size line. The hub holds the catalog specification. Assay reporting is explained on the COA page; the light and moisture margin is on the stability page; the level-four comparison goes further on form; the methylcobalamin page covers the adjacent product; the methods library covers HPLC; release and change control are on the quality page. ### 02.1 Adenosylcobalamin vs methylcobalamin: form, stability and label URL: https://nutrition.rainwoodbio.com/products/vitamins/adenosylcobalamin/grades/adenosylcobalamin-vs-methylcobalamin/ Reviewed: 2026-11-20 Adenosylcobalamin and methylcobalamin are both coenzyme forms of vitamin B12, and both are red solids that declare the same nutrient. The difference sits in the upper ligand: a 5'-deoxyadenosyl group in one, a methyl group in the other. That single substitution changes the formula, the mass, the chromatographic behaviour, the assay gate and the light margin. In one lineOne ligand separates the two coenzyme forms: the adenosyl molecule is about 235 mass units heavier, its catalog gate is wider, and both need an opaque pack and a label that names the form. ## The ligand is the difference The corrin ring and the cobalt are shared; the group above the cobalt is not. Adenosylcobalamin carries a 5'-deoxyadenosyl group and the CAS number 13870-90-1. Methylcobalamin carries a methyl group and the CAS number 13422-55-4. The table lists the fields that should match before an assay comparison means anything. Adenosylcobalamin and methylcobalamin on the identity fields | Field | Adenosylcobalamin | Methylcobalamin | CAS number | 13870-90-1 | 13422-55-4 | Formula | C72H100CoN18O17P | C63H91CoN13O14P | Molecular weight | About 1,579.6 g/mol | About 1,344.4 g/mol | Cobalt ligand | 5'-deoxyadenosyl | Methyl | UV-Vis maxima | Near 260, 375 and 522 nm | Near 267, 342 and 522 nm | Ingredient name on the label | Adenosylcobalamin | Methylcobalamin A red colour and a B12 assay do not tell the two apart. The 375 nm band does, which is why the identity standard and the spectrum belong in the specification rather than in a methods footnote. ## What the extra mass means The adenosyl group adds about 235 mass units, so the molecule is roughly 17.5% heavier. Cobalt falls from about 4.4% in methylcobalamin to about 3.7% in the adenosyl form, a useful analytical check but not a label conversion. Vitamin B12 is declared by mass, so a 1,000 µg claim remains 1,000 µg whichever form carries it. The extra mass is inside the molecule. What changes on the line is the assay and the moisture, because a 95.0% powder needs more material than a 99.0% powder for the same declared figure. ## Stability: the same failure mode, a different margin Both forms lose the upper ligand when light reaches the cobalt–carbon bond; the adenosyl bond is the weaker of the two, and the loss product is hydroxocobalamin. The solid survives longer than the solution, but the powder surface still reacts, and a clear hopper or an open tray is an exposure. Neither form has a shelf life by itself. The pack, the storage temperature and the finished matrix set the period, and the study has to be run on the form and pack being sold. A methyl study does not release an adenosyl lot, and an adenosyl study does not release a methyl one. ## The assay has to match the form The catalog values differ: ≥95.0% for adenosylcobalamin, 98.0–101.0% for methylcobalamin. These are release gates of different widths, not grades of one product. The ≤10.0% moisture allowance belongs beside the adenosyl assay and its basis. Each form needs its own reference standard. An adenosyl sample read against a methyl standard at 342 nm, or a cyano standard at 361 nm, can produce a number, but that number is an assumption. Ask for the standard, the wavelength and the spectrum before comparing two certificates. ## What the label has to say The nutrition panel counts vitamin B12 in micrograms; the ingredient list is the only place the form appears. Write “adenosylcobalamin” or “methylcobalamin” there, not the family name alone. If a product uses both, both are listed. In the EU, Annex II of Directive 2002/46/EC lists 5'-deoxyadenosylcobalamin and methylcobalamin on separate lines; cite the line that matches the ingredient, as of this review. In the US, the Supplement Facts panel gives the vitamin B12 amount and the ingredient list gives the form. A dilution adds its carrier to that list; the crystalline grades do not. Claims attach to vitamin B12 and its authorised wording, not to the ligand, and no disease-related claim is made here. ## When to choose which Pick the form the specification and the market file name, then confirm that the process can protect it. If the label and the file say adenosylcobalamin, supply that form; if they say methylcobalamin, do not substitute on the basis of a higher assay. A switch requires a new specification, a new standard, a new stability file and a label review. The weigh-up, the pack and the process light controls move with it. Handle the change as a new product introduction, not a purchasing swap. The adenosylcobalamin product page carries the catalog specification; the methylcobalamin product page covers the other form; the grades page places this comparison in the wider range; the methods library covers the HPLC and UV work; the quality page describes the release file. ### 03 Adenosylcobalamin is photolabile: the pack decides the shelf life URL: https://nutrition.rainwoodbio.com/products/vitamins/adenosylcobalamin/stability/ Reviewed: 2026-11-20 Adenosylcobalamin is a solid that wants three conditions: darkness, a sealed pack and a cool store. Give it those and the crystal holds its assay for the retest period supported by data; expose it to light, moisture or heat and the upper ligand comes off. The shelf life therefore belongs to the pack and the matrix, not to the molecule in the abstract. In one lineLight breaks the adenosyl–cobalt bond and the assay can fall while the powder still looks red; the pack, the storage condition and the finished matrix decide the shelf life. ## The powder: light, water and the seal The crystal is stable enough to ship and store, but its surface is where damage starts. Water uptake raises loss on drying and lowers the as-is assay; light removes the adenosyl group. The ≤10.0% moisture gate is a release limit, not a licence to keep the pouch open. Drums and pouches need an inner liner that actually seals, and the liner should be closed again after sampling. A container opened on the dock and left unsealed for a shift has run a stability test the product did not ask for. Close the foil between weighings and keep the drum sealed until it reaches the dispensary. A desiccant helps in a humid room but does not replace a proper liner. Heat speeds both moisture migration and the light reaction, so a warm store shortens the margin even when the pack is opaque. ## The solution: the least stable format Water is the worst place for this molecule. Light, oxygen, heat and pH act on the adenosyl–cobalt bond at once, and hydroxocobalamin appears as the first product. A ready-to-drink line adds pasteurisation or hot fill, a second stress on top of the hold. A stick pack avoids the problem because the consumer adds water at use. If a liquid is required, use an opaque container, control pH and dissolved oxygen, and validate the hold time. Match the analytical solvent to the matrix pH so the identity test reads the same spectrum as the product. ## What drives degradation Factors that move adenosylcobalamin during storage | Factor | What it does | Control | Light | Cuts the cobalt–carbon bond; the hydroxo form appears | Opaque pack, dark store, subdued filling light | Moisture | Raises loss on drying and dilutes the as-is assay | Sealed pouch, liner, desiccant if needed | Heat | Drives both the light and the moisture damage | Cool store and a cool process | Oxygen | Oxidises the exposed surface and the solution | Low headspace, sealed pack, deoxygenation | pH | Moves the spectrum and the solution lifetime | Validate the matrix pH, match the method solvent | Neighbours | Ascorbic acid, iron and some minerals in a blend | Separate sensitive ingredients, test the blend The factors amplify one another. A bright, warm, humid room is one combined exposure, not three separate ones. The stability question is always specific: which pack, which matrix, which time and which neighbours. ## A stability protocol for the ingredient Run the study in the pack being sold. Standard warehouse arms are 25 °C/60% and 30 °C/65% relative humidity, with 40 °C/75% as a stress arm; add a light-exposure arm, because a dark chamber will miss the main failure mode. At each point, test assay, loss on drying, appearance, the UV-Vis spectrum and the cobalamin profile. Add microbiology at the start and end, and repeat the work in the finished matrix where the pack or process changes. Report results by time point and pack, not as a single pass line. ## The finished formula changes the answer A capsule or tablet is the easier matrix, but the shell and excipients can still pass moisture into the fill. Check loss on drying at release and after storage, and watch the cobalamin profile as well as the assay. A stick pack depends on the seal: one pinhole defeats the foil. A gummy brings heat and water into the process, and a liquid brings light and pH. In each case the formulator decides whether an overage is needed; no overage repairs a pack that leaks light. ## How the shelf life is set The retest period is written into the specification and backed by data from the exact pack, condition and panel. Ask for the study summary for the pack you are buying, not a general statement about the molecule. When the period expires, re-test the retained sample before extending use; a period earned by a drum does not transfer to a pouch repacked later. The hub lists the standard packs; the COA page sets out the release tests; the MOQ page covers pack and lead time; the methods library describes the assay; the quality page describes release. ### 04 Adenosylcobalamin: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/vitamins/adenosylcobalamin/moq/ Reviewed: 2026-11-20 The minimum is 1 kg in a foil pouch; the bulk pack is a 25 kg fiber drum, and the standard lead time is 1–7 days from confirmation. Because the vitamin is dosed in micrograms, a kilogram is not a production quantity for most customers. It is the smallest unit that carries its own lot code, can be sampled, and can travel as a parcel. In one lineOne kilogram is the smallest released lot that can be sampled, shipped and traced; at a microgram dose it is also far more material than a first trial needs. ## Why the minimum is 1 kg A kilogram gives a buyer enough for a trial, a retain and an independent check from one released lot. It also keeps the chain of identity intact: carving a smaller quantity out of a drum creates a repack with a new handling history and the same lot code, which is harder to defend in a dispute. The arithmetic is stark. At 1,000 µg per serving, a kilogram contains about a million servings before assay and overage. A small brand may use a few percent of the pouch in the first year, so the rest becomes a storage obligation. For a light-sensitive powder, that obligation is a stability question as much as a stock question. The 25 kg drum is for a confirmed plan, not for a first trial. ## Packs and formats Standard adenosylcobalamin packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Light and moisture barrier; reseal after opening | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner | Granulated powder | On request | Flow and dust control | Separate specification; particle-size line changes The standard powder passes 80 mesh. Granulation is a separate specification and can change the lead time; ask for it before the quotation, not after the purchase order. ## Lead time and dispatch One to seven days covers picking, documents and handover to the carrier. Transit, customs and the customer's own release sit outside that window. A granulated lot or a non-standard pack needs its own dispatch date. Ask for the date, not a range, and confirm who books the movement under the Incoterm. The pouch usually moves as a parcel, the drum as a pallet. Since the cargo is light-sensitive, the number of handling points and the storage at each one belong in the logistics plan. ## What a quotation needs Six details make a quotation comparable: - Ingredient. Adenosylcobalamin, CAS 13870-90-1, crystal grade, standard named. - Quality. Assay and basis, water, mesh, metals and the micro panel. - Pack. 1 kg foil pouch, 25 kg fiber drum, or granulated on request. - Route. Destination, delivery point and Incoterm. - Paperwork. Lot COA, TDS, SDS and any market-specific statement. - Context. The dosage form and the country of retail sale. A quote missing the assay basis or the destination is not comparable with one that states them. The document set is part of the offer because the same lot may be acceptable in one market and not in another. The HPLC method behind the certificate is described in the methods library. Commercial terms are set in the quotation, not on this page. ## The sample is a lot, not a demonstration The pouch is also the qualification sample. Test identity, assay, moisture and microbiology, and retain a portion from the same pack. The lot code on the sample, the certificate and the quotation should match. Once the pouch is opened for a trial, the remainder is a repack. Record the opening date, reseal it in the dark and do not present the remainder as an untouched lot. If the trial needs less than a gram, ask for the split in writing and keep the lot code with the trial record. ## Terms to settle before the first order Put the commercial and quality terms in one agreement: Incoterm, pack, dispatch window, specification revision, per-lot certificate, retain, retest period and change route. Settle it before the first production order. Two clauses deserve explicit wording. Light protection should cover the pack, the liner and the storage condition, not just the shipping label. The assay basis and the identity standard should be named, along with the referee laboratory, because most disputes are about one of those two items rather than the powder itself. The hub holds the catalog specification; the COA page lists release tests; the stability page explains light and moisture; the compliance page covers market files; the quality page describes release and change control. ### 05 The regulatory file for adenosylcobalamin URL: https://nutrition.rainwoodbio.com/products/vitamins/adenosylcobalamin/compliance/ Reviewed: 2026-11-20 A compliance file for a B12 ingredient answers three practical questions: is the form permitted in the destination market, does this lot meet the specification that was filed, and does the label describe the ingredient without drifting into a claim? The brand placing the product on the market owns those answers. This page sets out the records and the boundaries, and it makes no disease-related claim. In one lineA B12 file stands on three legs: the named form, lot data against the limits, and a label that declares the nutrient without inventing a claim. ## What the file contains The file begins with the ingredient name. “Vitamin B12” is a nutrient family; adenosylcobalamin is one member with its own CAS number, specification and label entry. Every document that describes the material should use the member name, and the file should quote the exact legal entry or marketing basis relied on. Four records sit behind that name: the current specification, the lot certificate, the label and claim review, and the change history for source, process and pack. The technical data sheet and safety data sheet support the review but do not replace the destination text. The COA is the lot record, not the legal route. ## European Union Directive 2002/46/EC, Annex II, is the first place to look: it lists 5'-deoxyadenosylcobalamin as one of the vitamin B12 forms permitted in food supplements. The reference is form-specific and should be quoted that way, as of this review. Regulation (EU) No 1169/2011 sets the label: vitamin B12 in µg per portion and per 100 g, a percentage of the 2.5 µg reference value, and the form in the ingredient list. Contaminants are covered by Commission Regulation (EU) 2023/915. Read the consolidated text and the member-state practice, and record the version checked in the file. ## United States A US supplement carries adenosylcobalamin as a dietary ingredient and is made under 21 CFR 111. The Supplement Facts panel gives vitamin B12 in µg and as a percentage of the 2.4 µg Daily Value. The ingredient list supplies the form. The marketing basis for the ingredient — pre-1994 use or a notification — is a supplier statement, and the buyer confirms that it extends to the finished product. Federal law sets no general heavy-metal limit for supplements; the specification, state law and the finished-product risk assessment set the working limits. Structure/function claims need the DSHEA disclaimer and substantiation, and no disease claim is made here. ## Contaminants and limits The numbers apply to the food as eaten, not to the drum. A microgram dose makes the raw material a tiny share of the capsule, so a lot at the limit can still fit — or fail once the rest of the formula is counted. Convert the lot result to the serving and keep the calculation in the file. Heavy metals to confirm for the finished product | Parameter | EU supplement ceiling | Catalog specification | What the file should show | Lead (Pb) | 3.0 mg/kg | ≤3 mg/kg | Lot result, method and the finished-product calculation | Cadmium (Cd) | 1.0 mg/kg | ≤1 mg/kg | Lot result and any category exception that applies | Mercury (Hg) | 0.1 mg/kg | ≤0.1 mg/kg | Lot result and method | Arsenic (As) | No general EU ceiling | ≤2 mg/kg | The agreed limit and the method, stated on the certificate ## Claims and the label EU and UK health claims are restricted to the authorised list, with the authorised wording and conditions. They attach to vitamin B12, not to the adenosyl ligand, so the form neither creates a claim nor removes the need for authorisation. A US structure/function claim needs the disclaimer and substantiation. The label facts belong in the file separately: nutrient name and amount, ingredient name, and carrier where a dilution is used. A claim review is its own document with its own reviewer. A certificate supports the material, not the wording, and a change of claim does not reopen the specification. ## Documents for the adenosylcobalamin file Documents that travel with an adenosylcobalamin lot | Document | What it shows | When it is needed | Batch COA | Results against the specification, with methods and basis | Every shipment | Technical data sheet | Catalog specification, pack and storage | First order and technical review | Safety data sheet | Handling, dust and disposal information | Every shipment and for EHS | Agreed specification | Customer limits, identity standard and basis | Before the first order | Allergen and non-GMO statements | Carrier and processing position | Label review and customer request | Origin and change-control record | Manufacturer, site, process and pack changes | Qualification and audit | Stability and retest data | Pack, conditions and the supported period | Quality agreement Each document should carry the same lot code, and the specification version on the certificate should match the quotation. The analytical method behind the certificate is described in the methods library. ## Checklist before the first order - The specification, CAS number and adenosyl form are all named. - Each destination has its permitted-form route and label rules on file, with the version date. - The document set is complete: COA, TDS, SDS, allergen, non-GMO, origin and change control. - Contaminant results are calculated at the finished-product dose. - The ingredient list names adenosylcobalamin; the nutrient line gives vitamin B12; any carrier is declared. - Any claim is authorised and substantiated; no disease claim is made. - Quotation, specification and certificate carry the same version. The product hub carries the catalog specification; the identity page covers the analytical evidence; the methylcobalamin product page describes the adjacent form; the quality page describes the release file. ### 06 How we prove a lot is adenosylcobalamin URL: https://nutrition.rainwoodbio.com/products/vitamins/adenosylcobalamin/identity/ Reviewed: 2026-11-20 The adenosyl ligand is what makes this cobalamin different, and the identity file has to prove it. A vitamin B12 assay cannot: methylcobalamin and cyanocobalamin respond to the same detection and carry the same red colour. The proof is a combination of chromatographic retention, a UV-Vis spectrum with the 375 nm band, a cobalamin profile and a mass balance. In one lineThe adenosyl ligand is the identity: the 375 nm band with the 522 nm visible band, read against an adenosylcobalamin standard, separates it from the methyl and cyano forms. ## The four identity layers Identity is built in layers, and each layer catches a different failure. Paperwork catches a naming error; chromatography catches the wrong ligand; the profile catches a co-eluting cobalamin; the mass balance catches a dilution. None of the four is sufficient alone. Four layers of adenosylcobalamin identity | Layer | What it rules out | Evidence | Document | A mislabelled product | Name, CAS number and formula | Chromatography | Another upper ligand | HPLC retention against an adenosyl standard plus UV-Vis | Profile | A hidden cobalamin | Separate limits for methyl, cyano and hydroxo forms | Mass balance | A dilution or excess water | Assay, loss on drying and impurities A supplier who sends only a certificate with “B12 95%” has completed the first layer and skipped the other three. ## The ratios that carry the identity The UV-Vis ratios are the practical handle. In neutral solution the adenosyl spectrum has bands near 260, 375 and 522 nm; A375/A522 and A260/A375 are the two ratios a method can fix. Because the spectrum shifts with pH and solvent, the specification should state the ratios for its own method rather than borrow a number from another laboratory. The chromatographic ratio is the second handle: adenosyl peak area against total cobalamin area. Set a separate limit for methyl, cyano and hydroxo cobalamins, so a small impurity of the closest analogue cannot hide inside a general purity figure. Cobalt at about 3.7% is a supporting check, not the proof. ## HPLC and UV-Vis: proving the adenosyl form The method must name the column, mobile phase, wavelength, solvent and reference standard. Retention alone is weak; the spectrum is the second dimension. An adenosyl standard is required for both identity and assay, and a degraded standard will move the retention and the spectrum together. Sample handling matters more here than for a stable vitamin. The powder surface loses the adenosyl group under light, so weighing and dilution should be done in subdued light and the vial protected before injection. A low assay from a light-exposed sample can be an artefact, not a lot failure. ## X-ray diffraction: the solid-state check XRD answers whether the solid is crystalline and whether the pattern matches a reference. Adenosylcobalamin is sold as a crystalline powder, so the test has meaning for the pure grade; on a carrier dilution the carrier dominates the pattern, which itself shows what was added. XRD does not identify the ligand and is not a purity assay. It is useful for a disputed lot or a source comparison, not as a routine release line. Ask for the reference pattern and the detection limit before accepting a “conforms” statement. ## What adulteration looks like Common adenosylcobalamin substitutions and the signals | Adulterant | What it does | Signal | Test | Methylcobalamin | Closest analogue; similar colour and response | 342 nm band and retention differ; methyl peak present | HPLC/UV against an adenosyl standard | Cyanocobalamin | Cheaper, more stable; red and plausible | 361 and 550 nm bands; different retention | HPLC profile, UV-Vis | Hydroxocobalamin | Light-degradation product; still red | Extra peak and spectrum shift | HPLC profile, UV-Vis | Carrier dilution | Lowers the assay; adds a carrier | Assay low; loss on drying and ash move | Mass balance, carrier identification | Dye | Copies the colour, not the spectrum | No UV match | UV-Vis, HPLC The closest substitution is methylcobalamin, because it is also a coenzyme form and looks the same in a photograph. The strongest evidence against it is the 375 nm band and the retention time, not the colour. ## How to write the identity into the specification - “Material: adenosylcobalamin, CAS 13870-90-1, C72H100CoN18O17P.” - “Assay: ≥95.0% by HPLC, adenosylcobalamin standard, basis stated.” - “Spectrum: retention plus UV-Vis; maxima and ratios reported.” - “Profile: separate results for methyl-, cyano- and hydroxocobalamin.” - “Water: loss on drying ≤10.0%; contaminants per the panel.” - “Size and pack: ≥95% through 80 mesh, light-resistant container.” - “Route: destination, use and form fixed in writing before release.” ## Questions to put to the supplier - Which form and CAS number appear on the certificate for this lot? - Please send the chromatogram and the complete UV-Vis spectrum, with the assay figure. - Name the reference standard and the solvent used for the spectrum. - Report the methyl, cyano and hydroxo cobalamin results separately for this lot. - If a result is contested, will you re-test the retained sample jointly? Keep those five answers with the lot record; one without the others leaves the file incomplete. The hub has the catalog specification, the COA page places each result, the grades page compares the physical forms, the level-four comparison follows the label and stability consequences, the methylcobalamin page covers the other form, the methods library explains the separation and the quality page describes release. ### 01 What the COA for choline chloride actually contains URL: https://nutrition.rainwoodbio.com/products/vitamins/choline-chloride/coa/ Reviewed: 2026-11-20 The certificate for a choline chloride lot reports appearance, identification of choline and chloride, assay by titration, loss on drying, pH, particle size, the heavy-metal panel and microbiology. The assay can be a chloride titration, which counts the anion rather than the choline cation, so a choline figure and an amine limit belong beside it. The limits below are the catalog release gates; a given pack is proved by its own lot certificate. In one lineThe assay can count chloride while the label counts choline, so the certificate must name the titrant and report both figures. ## Auditing a release certificate Each line should let a reader check four things: what was measured, how, against which limit, and what the lot gave. A row that reads “conforms” asks the reader to accept a conclusion without the evidence. The table below sets out the catalog lines; the lot certificate adds the measured result and a lot code. Release panel · choline chloride | Parameter | Method | Release limit | Identification | Choline and chloride by the named methods | Both conform | Assay | Titration — name the ion and the titrant | 98.0–101.0% | Choline | HPLC or ion chromatography | Report the measured figure | Loss on drying | Gravimetric | ≤1.0% | pH (10% solution) | Potentiometry | 6.0–8.0 | Total amines | Gas-sensing electrode, as trimethylamine | Report against the agreed limit | Heavy metals | ICP-MS | Pb 3 · As 2 · Cd 1 · Hg 0.1 (mg/kg, max) | Microbiology | Plate count and absence tests | E. coli and Salmonella not detected; TPC ≤1,000 cfu/g; yeasts and moulds ≤100 cfu/g | Particle size | Sieve analysis | ≥95% through 80 mesh Appearance is white to off-white powder. That line is weak on its own, because a deliquescent lot can look correct in the drum and be wet at the balance. ## Which ion the titration measures The United States Pharmacopeia monograph for choline chloride is explicit: the assay is a silver nitrate titration of chloride, with 0.1 N titrant and 13.96 mg of choline chloride per millilitre, and the result is calculated on the anhydrous basis. The reaction counts chloride ions. It assumes every chloride ion belongs to a choline molecule, which is true for a pure lot and false for a blend with sodium chloride or ammonium chloride. The catalog line here says only “titration”. The certificate should name the titrant and the ion. If the laboratory uses the compendial silver nitrate method, the assay is a chloride figure; if it uses a choline-specific titration such as sodium tetraphenylborate, it is a cation figure. The two are not interchangeable. The basis matters separately. The USP definition is 99.0–100.5% on the anhydrous basis with water not more than 0.5%; the catalog is 98.0–101.0% with loss on drying ≤1.0%. A lot at 0.8% water that reads 99.0% as-is calculates to 99.8% anhydrous. Both figures can be true, and they describe different powders. The catalog window is also wider than the monograph at both ends. A lot at 98.5% meets the catalog and fails the USP definition; a lot at 101.2% does the same. A buyer who needs the monograph writes the monograph limits, not the catalog range. ## Release limit, batch result and the basis Limit, result and basis on a choline chloride certificate | Line | Release limit | Result column | Assay | 98.0–101.0%, basis stated | A measured percentage, the titrant and the basis | Choline | Agreed figure, about 74.6% at theoretical | HPLC or IC result with the method | Water | ≤1.0% catalog; ≤0.5% USP | Loss on drying or Karl Fischer, named | pH | 6.0–8.0 catalog; 4.0–7.0 USP | The concentration and the meter reading | Amines | ≤0.001% as trimethylamine, USP | The measured figure, not “absent” Two rows deserve a comment. The pH windows overlap but are not the same: a lot at pH 7.5 passes the catalog and fails the USP test, so the destination specification decides which applies. The amine limit is the odour line. A fishy note in the drum is a signal that the lot has been warm or alkaline, and a measured amine figure is more useful than a sensory comment. “Passes specification” is a conclusion, not a result. The reader should be able to reach it from the numbers, the methods and the limits on the same page. ## What moves between batches Water is the first mover. Choline chloride is deliquescent, so an open pack takes up water, the loss on drying rises, the powder cakes and the as-is assay falls. The dry material has not changed; the water has. A certificate issued on a freshly opened drum can look better than the same lot after a week in a humid room. pH moves with residual acid or alkali from the manufacturing step and can drift in a poorly sealed pack. The amine figure moves with heat and pH and is the line most often missing from a supplier's certificate. Particle size moves with the mill and the sieve; the 80 mesh figure is a finishing specification and can change without any change in the chemistry. The chloride and choline figures should agree. Convert the assay to choline with 104.17 ÷ 139.62 = 0.746 and set it beside the HPLC result; a gap points to a chloride-bearing impurity, a dilution or a method problem. ## When to use an outside laboratory An outside laboratory earns its place when the source is new, the market is regulated, the result is contested, or the grade claims the USP monograph. The useful panel is not a repeat of the certificate: ion chromatography for chloride, HPLC for choline, Karl Fischer for water, ICP-OES for sodium and potassium, and a nitrogen test if an ammonium salt or urea is suspected. Add the amine test and the residue on ignition. A lot spiked with sodium chloride raises the chloride titration and the ash while the choline figure stays low; a lot cut with a non-chloride carrier lowers both. The pattern of the two figures is more informative than either one alone. Keep the chain of custody: test the retained sample, not a second scoop, and make the report name the lot. A “not detected” line without a detection limit is evidence about the method, not about the sample. ## Six lines to compare between suppliers Two quotations that agree on assay but differ on basis or amine limit are not describing the same powder. Put the six lines side by side before the first order. Supplier comparison · six matching lines | Line | What to ask | Why it matters | Form and CAS | Choline chloride, CAS 67-48-1? | The bitartrate carries a different choline figure | Assay and basis | Titration result; as-is or anhydrous? | A water-rich lot reads differently on each basis | Choline | HPLC or IC result and method? | The assay may count chloride, not choline | Water and pH | LOD or KF; 10% pH? | Deliquescence and acidity decide handling | Amines | Result against 0.001%? | The odour and quality signal | Pack and lot | Foil pouch, drum liner, lot code? | The barrier and the traceability The catalog values are listed on the choline chloride product page. The grade choice is on the grades page, the tests that prove the salt on the identity page, the chromatographic method in the HPLC note and the release workflow on the quality page. ### 02 Choosing a choline chloride grade: powder, solution or carrier URL: https://nutrition.rainwoodbio.com/products/vitamins/choline-chloride/grades/ Reviewed: 2026-11-20 Choline chloride appears on the market as a 98–101% crystalline powder, a granulated powder, a 70–75% aqueous solution and a 60% feed-grade product on a carrier. The catalog grade here is the powder at 80 mesh for capsules, tablets and powder blends, with granulation available on request. The grade decides the choline per gram, the water load and whether the material is a food ingredient at all. In one lineThe grade is the carrier, the water and the mesh: the same salt at 99% powder, 75% solution or 60% feed grade is three different specifications. ## One salt, several grades Choline chloride is a single chemical entity: CAS 67-48-1, C5H14ClNO, molecular weight 139.62. What changes between grades is the concentration, the carrier and the physical form. A 99% crystalline powder, a granulated powder of the same assay, a 75% solution and a 60% feed product are four commercial materials with four specifications. The distinction is not cosmetic. The 60% feed grade is built on a carrier such as corn cob or silica; it is a feed additive, not a food or supplement ingredient, and its carrier changes the ash, the flow and the label. The solution grade carries 25–30% water by design. The granulated grade has the same assay as the powder but a different particle-size distribution, dust level and flow. A purchase order that says “choline chloride” without the grade has not specified the material. The grade decides how much choline arrives per kilogram, what the water load is, and which regulatory route the pack can take. ## The grades side by side Choline chloride grades · concentration, choline and water | Grade | Choline chloride | Choline per gram | Water | Typical use | Crystalline powder | 98.0–101.0% (catalog) | About 746 mg at theoretical | LOD ≤1.0% | Capsules, tablets, sticks, blends | Granulated powder | Same assay as the powder | About 746 mg at theoretical | LOD ≤1.0% | High-speed presses, blends, dust control | Aqueous solution | 70–75% | About 522–560 mg | 25–30% by design | Liquids, syrups, liquid fills | Feed grade on carrier | About 60% | About 448 mg | Carrier-dependent | Animal feed only The choline figures are arithmetic, not a label dose: 104.17 ÷ 139.62 = 0.746, so one gram of the pure salt carries about 746 mg of choline. The catalog fixes the salt assay and the water, not a choline window; the measured choline figure comes from the lot certificate, and it should be used for the label worksheet. The feed grade is listed here to mark the boundary, not as an alternative supply. ## Water, mesh and the powder in the room Choline chloride is deliquescent. It absorbs water from the air until it can become sticky or wet, and the rate rises with temperature and humidity. A 99% powder left in an open dish in a humid room will cake at the surface and then through the mass. The USP monograph directs that it be kept in well-closed containers for that reason, and the catalog loss on drying of ≤1.0% is a release gate, not a storage allowance. The catalog powder is ≥95% through 80 mesh. That is a finishing specification: it moves with the mill and the sieve, not with the chemistry, and a finer powder has more surface for water uptake and more dust. Granulation coarsens the particles, improves flow and reduces dust, but it does not raise the assay and it does not make the material less hygroscopic; it changes how the powder behaves in the hopper. pH is 6.0–8.0 in 10% solution, so the salt is close to neutral, unlike the acidic bitartrate. Solubility is high, which is why the solution grade exists and why a spill is easy to clean and hard to dry. ## Matching the grade to the dosage form Capsules. The 80 mesh powder or the granulated form. The powder is the simpler choice; the granulate flows better on a high-speed filler. Control room humidity and keep the hopper covered, because a deliquescent fill will pick up water from the air during a long run. Tablets. Granulation is the usual answer: it improves flow, reduces dust and gives a more uniform fill. Direct compression is possible with a coarse, free-flowing lot, but the deliquescence still has to be managed by the room and the pack. A tablet that picks up water during compression can stick, cap or soften in storage. Sticks and drink mixes. The powder dissolves freely and carries a high choline load per gram, which keeps the stick weight down. The taste is bitter, so the flavour system has to cover it. The foil seal is the critical barrier; a pinhole is enough to turn the powder into a cake. Liquids. The 70–75% solution is the practical input: it is already dissolved, it is pumpable, and it carries no dust. The water is part of the formula, so the preservative system and the pH have to be designed for it. A dry powder can also be dissolved on site, but the solution grade removes a handling step and a dust risk. ## Writing the grade into the specification Start with the salt, the CAS number and the grade. For the catalog powder: “Choline chloride, CAS 67-48-1, assay 98.0–101.0% by titration with the titrant and basis named, choline by HPLC or IC, loss on drying ≤1.0%, pH 6.0–8.0 in 10% solution, total amines within the agreed limit, ≥95% through 80 mesh, and the catalog heavy-metal and microbiology panels.” If the destination needs the USP monograph, write the monograph limits instead of the catalog ones: 99.0–100.5% on the anhydrous basis, water ≤0.5%, pH 4.0–7.0, total amines ≤0.001%, residue on ignition ≤0.05%, and the monograph's identification by infrared and chloride test. The two specifications are close but not identical, and a lot can meet one and miss the other. For a solution grade, add the assay, the density or the mass per litre, the water, the pH and the preservative or microbial limits. For a granulated grade, add the particle-size distribution and the bulk density. For any grade, add the food or feed statement, the allergen and GMO statements, and the pack. A grade that is not named in the specification is not controlled. ## When a grade is the wrong choice The feed grade is not a cheaper supplement grade. It contains a carrier, it is sold against feed specifications, and its contaminant and labelling file belongs to feed. A supplement made from it would need a different specification, a different certificate and a different regulatory route. The solution grade is the wrong choice for a dry blend: it adds water that the blend cannot tolerate. The granulated grade is not a purity upgrade: it is the same assay with a different particle size, so it does not solve a choline shortfall. The catalog values are on the choline chloride product page. The release panel is on the COA page, the pack and lead time on the MOQ page, and the salt comparison on choline chloride vs choline bitartrate. The choline bitartrate product page carries the other salt, and the quality page describes how a grade is released. ### 02.1 Choline chloride vs choline bitartrate: choline content, water and the label URL: https://nutrition.rainwoodbio.com/products/vitamins/choline-chloride/grades/choline-chloride-vs-choline-bitartrate/ Reviewed: 2026-11-20 Choline chloride and choline bitartrate deliver the same nutrient from different salts. One gram of choline chloride carries about 746 mg of choline; one gram of choline bitartrate carries about 411 mg, so the chloride supplies the same choline from about 55% of the weight. The chloride is also deliquescent, close to neutral in solution and 25.4% chloride by mass, while the bitartrate is a crystalline acid salt. The choice changes the weigh-up, the water budget and the label line. In one linePer gram the chloride delivers about 1.8 times the choline of the bitartrate, but it brings 25.4% chloride and a deliquescence problem that the bitartrate does not have. ## The choline content, and the weight it implies The arithmetic is fixed by the formulas. Choline chloride is C5H14ClNO at 139.62 g/mol; the choline cation is 104.17 g/mol, so the theoretical fraction is 74.6%. Choline bitartrate is C9H19NO7 at 253.25 g/mol, so its theoretical fraction is 41.1%, and the catalog window is 40.5–41.5% by HPLC. The catalog here does not fix a choline window for the chloride; the measured figure comes from the lot certificate. For the same choline, divide by the fraction: 82.5 mg of choline needs about 111 mg of chloride or 201 mg of bitartrate; 300 mg needs about 402 mg or 730 mg; 550 mg needs about 737 mg or 1,338 mg. The ratio is about 1.82 at every dose, because it is a ratio of molecular weights. Salt weight for a target choline figure · theoretical fractions | Choline | Choline chloride | Choline bitartrate | 82.5 mg | ≈111 mg | ≈201 mg | 100 mg | ≈134 mg | ≈243 mg | 300 mg | ≈402 mg | ≈730 mg | 550 mg | ≈737 mg | ≈1,338 mg Use the measured choline from the certificate for the label worksheet, not the theoretical fraction: a lot at 99.0% assay carries about 73.9% choline. ## Water, pH and the chloride load Both salts are hygroscopic; the chloride is deliquescent. It can take up enough water from the air to become sticky or wet, which is why it is often supplied as a solution and why the powder needs a sealed foil pack and a dry filling room. The bitartrate also picks up water and has a loss-on-drying limit of ≤1.0%, but it does not usually collapse into a liquid phase. The pack requirement is therefore stricter for the chloride, and the in-use period after opening is shorter. The two solutions sit in different pH ranges. The chloride is 6.0–8.0 in 10% solution; the bitartrate is 3.0–4.5 in 5% solution because of the hydrogen tartrate. In a carbonate or bicarbonate system the bitartrate reacts and can release carbon dioxide, while the chloride is the easier fit. In a capsule or stick where acidity is unwanted, the chloride avoids the acid note but brings the water problem. The chloride also adds mass that is not choline. One gram of the salt carries about 254 mg of chloride, and 737 mg of the salt — the amount that supplies 550 mg of choline — carries about 187 mg of chloride. That is a nutrient in its own right, and it should be counted if the formula declares chloride or if the taste and the salt load matter. The bitartrate carries tartrate instead, which is acidic and contributes to the taste. ## What the label has to say The ingredient line names the salt and the nutrient line names choline: “Choline (as choline chloride)” or “Choline (as choline bitartrate)”. The salt on the label must match the certificate. If the panel declares choline, the number is choline, not salt; the salt weight behind 100 mg of choline is about 134 mg of chloride or 243 mg of bitartrate. In the EU, Annex XIII of Regulation (EU) No 1169/2011 sets a nutrient reference value of 82.5 mg for choline. That is 100% of the NRV, so 100 mg of choline is about 121%, and the salt weight that supplies it is about 134 mg of chloride. The three permitted choline claims in Regulation (EC) No 432/2012 also use 82.5 mg of choline per 100 g, per 100 ml or per portion as the threshold. The claim is about choline, not about the salt, and the current wording should be checked before printing. In the United States, the Daily Value is 550 mg for adults and children aged four and over, so 100 mg of choline is 18% of the Daily Value. The Supplement Facts panel declares choline and names the source. The salt weight is not the choline figure; presenting it as choline overstates the nutrient by about a third. ## The two specification sheets Catalog specification · choline chloride against choline bitartrate | Line | Choline chloride | Choline bitartrate | CAS · formula · molecular weight | 67-48-1 · C5H14ClNO · 139.62 | 87-67-2 · C9H19NO7 · 253.25 | Salt assay | 98.0–101.0% by titration | 96.5–100.5% as-is by titration | Choline | Reported on the COA; 74.6% theoretical | 40.5–41.5% by HPLC | Loss on drying | ≤1.0% | ≤1.0% | pH | 6.0–8.0 in 10% solution | 3.0–4.5 in 5% solution | Particle size | ≥95% through 80 mesh | ≥95% through 40 mesh | Assay method | Titration; name the ion and titrant | Titration of choline, calculated as bitartrate The two sheets are not interchangeable: the method, the basis, the mesh and the label all move with the salt. A specification written for one salt has to be rewritten for the other. ## What a salt switch moves A salt switch · the lines to recheck | Change | Chloride to bitartrate | Bitartrate to chloride | Weight for the same choline | ×1.82 | ×0.55 | Capsule or fill | Larger fill, or a lower dose | Smaller fill, or a higher dose | pH and taste | More acidic, tart | Less acidic, saline | Water pick-up | Lower, still hygroscopic | Higher, deliquescent | Label and stability file | New salt name and choline figure | New salt name and choline figure A switch is a formulation change, not a purchasing substitution. The weigh-up, the fill weight, the water budget, the assay method, the label and the stability file all move. A 500 mg fill of bitartrate is a 206 mg choline dose; the same fill of chloride is 373 mg, a different dose. ## When to choose which Choose the chloride for a liquid or a syrup, where the near-neutral pH and the higher choline per gram reduce the dose weight and the water is already in the formula. Choose it for a dry blend only when the pack and the room can exclude water. Choose the bitartrate for a dry capsule or tablet where the acidic, crystalline powder has already been validated and the label names the bitartrate. If the label says choline bitartrate, only the bitartrate will do; if the label says choline chloride, only the chloride. The nutrient is the same, but the salt is part of the identity, the dose arithmetic and the regulatory file. The catalog values are on the choline chloride product page and the choline bitartrate product page. The grade comparison is on the grades page, the release panel on the COA page, the assays in the methods library, and the release workflow on the quality page. ### 03 Choline chloride is deliquescent: the pack decides the shelf life URL: https://nutrition.rainwoodbio.com/products/vitamins/choline-chloride/stability/ Reviewed: 2026-11-20 Choline chloride does not fail by oxidising; it fails by taking up water. The solid is deliquescent, so a sealed foil pouch, a lined drum and a dry filling room are what keep it free-flowing, and an opened pack has its own short in-use life. A solution adds microbial growth and pH-dependent trimethylamine, so the liquid format needs its own hold data. In one lineWater is the failure mode: the pack, the humidity and the seal decide how long choline chloride stays free-flowing. ## The powder: deliquescence, caking and the seal Deliquescence is not the same as ordinary moisture pickup. A hygroscopic powder holds water in its structure; a deliquescent salt can take up enough water at the surface to form a saturated film and then a liquid phase. The powder first looks damp, then cakes, then collapses into lumps. The choline is still there, but the material no longer flows and the as-is assay falls because the water is now part of the weighed powder. The catalog loss on drying is ≤1.0%, and that is a release gate rather than a storage allowance. A lot leaves the plant inside that window and can leave it again in a humid filling room. The USP monograph's instruction to preserve the material in well-closed containers is the minimum; the pack, the seal and the room do the rest. The 1 kg foil pouch is the barrier for the small pack, and the seal is where it fails first. An opened pouch that has been folded shut is not the equivalent of a heat-sealed one. In the 25 kg drum, the inner liner is the barrier and the drum is handling protection. A desiccant can help inside a small container, but it is not a substitute for a closed seal. If a pack has been in cold storage, let it reach room temperature before opening, or condensation will form on the powder. ## The solution: microbes, pH and the amine note Dissolved choline chloride is a water-rich system with a carbon and nitrogen source, and microbes can grow in it. A preservative system, a validated hold time and a controlled fill belong in the solution specification. A tank left overnight without a preservative or a validated hold is a microbial risk, however clean the powder was. pH and heat act together on the cation. Choline is a quaternary ammonium ion, and an alkaline drift with warmth can release trimethylamine, the fishy note that the amine limit is designed to catch. The USP limit for total amines is 0.001%, calculated as trimethylamine, and a solution that drifts alkaline can approach that note while the choline assay still looks acceptable. Light is secondary for this salt. Choline chloride is not a photolabile active in the way that some quinones are, but a clear bottle on a bench still exposes the solution to warmth and air. Keep the solution closed, keep it cool, and keep the hold time inside the validated window. ## What drives change Storage factors · choline chloride | Factor | Effect | Control | Water vapour | Surface film, caking, falling as-is assay | Foil or lined pack; dry room; reseal | Temperature | Faster uptake and faster amine formation | Ambient store; cool process; no hot bay | pH drift | Alkaline shift favours trimethylamine | Set and monitor the solution pH | Microbial load | Growth in solution or in a wet powder | Preservative or validated hold; micro limits | Seal defect | A pinhole admits humid air | Seal inspection; liner check; lot code The factors reinforce one another. A warm, humid room with an open pouch combines water, heat and air exposure in one place, and a warm alkaline solution combines the other two. The useful question is specific: for this pack, in this store, how long does the lot stay inside specification? ## A storage programme for the ingredient Bracket the real warehouse rather than assume it. Use 25 °C/60% relative humidity as the long-term arm and 30 °C/65% relative humidity as the intermediate arm. Add 40 °C/75% relative humidity as the accelerated arm, and add a water-uptake arm that weighs the pouch at every pull, because the mass change is the earliest signal for this salt. At each point, test assay with the method and basis named, choline, water, pH, appearance, total amines and microbiology. For a solution, add the microbial count and the amine figure at each hold point. Record the individual results rather than a single pass statement, and identify the pack and the lot family in the report. Ask for data on the pack you will buy. A pouch and a drum differ in headspace, opening history and surface-to-volume ratio, so a result from one does not transfer to the other. ## The matrix adds its own water A capsule or tablet starts dry, yet the shell and the excipients can still hand water to the fill. A deliquescent fill can soften the capsule, stick to the punch or cake in the bottle. Check water and appearance after storage as well as at release, and check the shell or the tablet hardness at the same time. A stick pack usually fails at the seal. A pinhole is enough for humid air to reach the powder, and the cake forms at the leak. Inspect the strip as well as the powder, and make the seal part of the stability file. In a liquid, the water is already present: the preservative, the pH and the process heat load decide the shelf life, and the bulk powder data does not apply. ## How the shelf life is set A shelf-life figure needs three qualifiers: the pack, the storage condition and the test panel. For a deliquescent salt the pack is the first qualifier, because the same lot can behave differently in a pouch and in an opened drum. The retest period on the specification should name the pack and rest on the stability file for that pack. Once the retest period ends, re-test the retained sample before extending. Never extend by assumption, and never transfer a bulk figure to a repacked container. An opened pack has an in-use period of its own, and that period should be written down before the first scoop is taken. The catalog values are on the choline chloride product page. The certificate lines are set out on the COA page; the packs are described on the MOQ page; the water test is defined in the loss-on-drying glossary entry; the destination rules sit on the compliance page; and the release workflow is on the quality page. ### 04 Choline chloride: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/vitamins/choline-chloride/moq/ Reviewed: 2026-11-20 The MOQ for choline chloride is 1 kg, in a heat-sealed foil pouch. The bulk format is a 25 kg fiber drum; the quoted confirmation-to-dispatch window is 1–7 days. Because the salt is deliquescent, the pack and the seal are part of the order rather than an afterthought, and a quotation should settle the grade, the assay basis, the choline figure, the water limit, the pack, the destination and the documents. In one lineThe 1 kg pouch is the smallest unit that keeps a deliquescent salt sealed, sampled and traceable as one lot. ## Why the minimum is a sealed kilogram One kilogram covers a bench trial, a retention sample and an outside identity check, and it can travel as a parcel. The pouch is a production unit with a lot code and a heat seal; the material inside it has one moisture history from filling to delivery. That is the commercial reason for the minimum, and it matters more for this salt than for a stable powder. Below 1 kg, the material is split from a larger container and repacked by hand. Every opening exposes the powder to the room, and a deliquescent salt keeps a record of that exposure in its water content. The split also loses the original seal and makes the lot trail harder to follow, without changing the chemistry. The 25 kg drum is the production unit. Its inner liner is the moisture barrier, and the drum itself is handling protection; once the liner is opened, the remaining powder is on an in-use clock. The drum reduces handling per kilogram but commits inventory and storage time, which matters for a hygroscopic material. ## Packs and barriers Choline chloride packs · barrier and use | Pack | Net weight | Barrier | Typical use | Foil pouch | 1 kg | Heat-sealed foil laminate | Trial, sample, small batch | Fiber drum | 25 kg | Inner liner inside the drum | Production | Granulated powder | 1 kg or 25 kg | Same pack as the powder | Tableting and blends | Hand split | Below 1 kg | Repacked container | Bench work only; new lot record The catalog powder is ≥95% through 80 mesh. Granulation changes the particle profile and the flow, so it is a specification change rather than a packing choice; order it before the quotation if the press needs it. The pouch should be heat-sealed, not folded and taped, and the drum liner should be closed after each withdrawal. ## Lead time and the dispatch date The 1–7 day window covers picking, the lot documents and dispatch. Transit, customs and the customer's own release sit outside it. Ask for the dispatch date rather than the range, because a parcel and a pallet do not move on the same schedule and the Incoterm decides who books which. For a deliquescent salt, the transit environment belongs in the conversation. A pouch that waits in a hot, humid depot can arrive with a soft or caked surface even though the seal left the warehouse intact. The outer carton should protect the seal from compression and puncture, and the receiving check should look at the pouch as well as the powder. ## What the quotation should state Six lines for a comparable choline chloride quotation | Item | What to state | Why it matters | Grade and CAS | Choline chloride, 67-48-1, powder or granulated | The 60% feed grade is a different material | Specification | Assay with titrant and basis, choline, water, pH, amines, mesh | Two lots can agree on assay and differ on water | Quantity and pack | 1 kg pouch or 25 kg drum | The barrier and the in-use life differ | Route and Incoterm | The destination and the trade term | Transit humidity is a quality variable here | Documents | COA, specification, SDS and market statements | The file travels with the lot | End use and market | Supplement, food or feed, and the country | The grade and the claim route follow the answer A quotation that names only “choline chloride” is incomplete, because the name covers a powder, a granulated powder, a solution and a feed product. Commercial terms belong on the quotation rather than here. ## The sample carries the lot code The 1 kg pouch is the qualification unit. Before scaling, test infrared identity, the assay with its method and basis, choline by HPLC, water, pH, total amines and the micro panel, and retain a sample from that pouch. The sample, its certificate and the quotation should carry the same lot code. Reseal the pouch properly and write the opening date on it. A folded top is not a seal, and a deliquescent powder will find the gap within days in a humid room. If the trial runs for more than a few weeks, move the remainder into smaller sealed containers under a handling record, or order a second pouch for the production trial. The bench lot and the production lot may be different lots even when the specification is the same. Keep the lot code with the trial results, and do not present a bench result as a production release. ## Terms to settle first Settle the commercial and quality points in one document: Incoterm, pack, dispatch window, the exact specification revision, a certificate for every lot, retention, the retest period and the change-control route. A signed quality agreement before the first production order saves a harder conversation after a disputed delivery. If a lot fails the agreed specification, both sides re-test the retained sample against the named method, with the referee laboratory and the payer named in advance. A return decided on appearance alone is hard to defend, and one decided on the chloride titration alone can miss a choline shortfall. The catalog values are on the choline chloride product page. The ordering term is defined in the MOQ glossary entry; shipping sits on the logistics page; the water behaviour is on the stability page; the release tests are on the COA page; and the quality page describes the release workflow. ### 05 The regulatory file for choline chloride URL: https://nutrition.rainwoodbio.com/products/vitamins/choline-chloride/compliance/ Reviewed: 2026-11-20 Choline chloride is supplied as the chloride salt of choline, CAS 67-48-1. The catalog specification describes the material; the regulatory file has to place it in a finished product, a dose and a market. Choline is an established nutrient with a long history of use, but the EU route for a food supplement is not a single harmonised authorisation, and the buyer's regulatory team confirms the destination. The checklist below is the working list for the file. In one lineThe certificate describes the salt; the regulatory file decides how the nutrient may be sold and labelled in the destination market. ## What the file contains The file has four parts: the grade specification, the lot certificate, the nutrient and labelling rules for the finished product, and the change-control record for source, grade and pack. The certificate, the technical data sheet and the safety data sheet each cover one slice; none of them chooses the market route. Grade is part of the regulatory question. A 98–101% food-grade powder, a 75% solution and a 60% feed-grade product on a carrier are different materials with different files. The feed grade is not a supplement ingredient, and a certificate written against a feed specification does not place the material in a food supplement. ## European Union Choline is not a vitamin or a mineral listed in Annex I of Directive 2002/46/EC, so a food supplement containing choline chloride sits under the “other substances” route: the member state where the product is sold decides whether the substance and the level are acceptable, and mutual recognition applies. Some member states publish their own maxima — Belgium, for example, sets a maximum of 1,500 mg of choline per day in food supplements as of this review. Check the current national rule for each market. Labelling follows Regulation (EU) No 1169/2011. Annex XIII sets a nutrient reference value of 82.5 mg for choline, so a product can declare a percentage of the NRV once the choline figure is known. The reference value is for choline, not for the salt: the salt weight has to be converted before the percentage is calculated. EFSA set an adequate intake of 400 mg of choline per day for adults in its 2016 review. That is a dietary reference value, not a maximum. The health-claim register and the contaminant rules sit alongside it, and the current consolidated texts are the reference. ## United States Choline chloride is affirmed generally recognized as safe for use in food at 21 CFR 182.8252, and it has a USP dietary supplement monograph. In a supplement it is declared in the Supplement Facts panel as choline, with the source named as choline chloride. The Daily Value for choline is 550 mg for adults and children aged four and over under 21 CFR 101.9, so 100 mg of choline is 18% of the Daily Value. The ingredient and the claim are separate reviews. A structure/function statement needs substantiation and the DSHEA disclaimer, and no disease-related claim is open for a choline supplement. The certificate supports the material; it does not support a claim. ## Contaminants, water and amines The catalog panel is the starting point, and the finished-product dose decides whether it is tight enough. Convert the lot result to the daily intake before comparing it with a destination limit: a limit expressed per kilogram of powder is not the same as a limit expressed per daily dose. Quality lines that belong in the regulatory file | Line | Catalog gate | Evidence for the file | Lead (Pb) | 3 mg/kg max | The lot value, its method and the dose conversion | Arsenic (As) | 2 mg/kg max | The lot value and method; the USP arsenic limit is tighter | Cadmium (Cd) | 1 mg/kg max | The lot value and any category exception | Mercury (Hg) | 0.1 mg/kg max | The lot value and method | Total amines | Agreed limit; USP 0.001% | The measured value, expressed as trimethylamine | Water | 1.0% catalog; 0.5% USP | Loss on drying or Karl Fischer, named The contaminant limits for food and food supplements are set in the destination rules, not in the catalog. The EU contaminant regulation is the instrument to check; in the US, the limits come from federal and state rules and from the customer's specification. The finished-product calculation is the one that matters. The amine line is a quality limit rather than a contaminant limit, but it belongs in the same file because it is the odour and handling signal. ## Claims and the label In the EU, Regulation (EC) No 432/2012 lists three permitted claims for choline: normal homocysteine metabolism, normal lipid metabolism and maintenance of normal liver function. Each may be used only for a food that contains at least 82.5 mg of choline per 100 g, per 100 ml or per single portion, and the claim is about choline, not about the salt. Check the current wording before the label is printed. The label names the salt and the nutrient: “Choline (as choline chloride)”. If the panel declares choline, the figure is choline, not salt, and the salt weight behind it is about 1.34 times larger. The chloride ion contributes chloride to the product, which is a nutrient in its own right and should be counted if the formula declares it. In the US, the source line and the Supplement Facts panel carry the same distinction. A structure/function statement is reviewed on its own. This site publishes the specification and makes no health claim; a claim review is a separate step for the brand. ## Documents for the file The buyer's file needs the COA with the assay method and basis, the choline figure, water, pH, total amines, the metal panel and the micro count. Add the specification, the TDS, the SDS, the GRAS citation for the US, the USP monograph reference where the grade claims it, the allergen declaration, the GMO and origin records, the residual-solvent statement and the food or feed grade declaration. If the grade is granulated or in solution, the file needs the particle-size or the density specification as well. If the destination is the EU, add the national rule for choline in food supplements and the NRV calculation. If the destination is the US, add the Daily Value calculation and the claim substantiation file. The product page carries the catalog values; the COA page maps the certificate lines. ## Checklist before the first order - The grade, CAS number and specification version are named. - The certificate, technical sheet, safety sheet, allergen, GMO, origin and solvent statements are present. - The assay method and basis, the choline figure and the amine limit are stated. - Every contaminant figure has been converted to the daily dose. - The EU NRV or the US Daily Value is calculated from choline, not from the salt. - The destination review covers both the label wording and the claim. The identity page covers the analytical evidence, the grades page covers the grade boundary, the quality page describes the release file, and the EU and US regulatory notes collect the framework references. ### 06 How we prove a choline chloride lot is the chloride salt URL: https://nutrition.rainwoodbio.com/products/vitamins/choline-chloride/identity/ Reviewed: 2026-11-20 A choline chloride lot is the chloride salt when five lines agree: the document names the form and CAS number, infrared matches the reference, the chloride test is positive, choline is present by HPLC, and the choline-to-chloride mass ratio is close to the theoretical 74.6 to 25.4. The assay alone is not enough, because a chloride titration counts the anion and a chloride-bearing impurity can pass it without carrying any choline. In one lineThe chloride test proves the anion, the choline figure proves the cation, and the mass balance proves they belong to the same salt. ## The five identity layers Each layer answers a different question, and a supplier who reports only the assay has answered the narrowest one. The table below is the sequence to ask for, from paperwork to mass balance. Five checks that make a choline chloride identity file | Check | The question it answers | Method | Evidence gained | Paperwork | Is the substance named? | Name, CAS and formula | Identity on paper only | Spectrum | Does the whole molecule match? | Infrared against a reference | The organic part and its environment | Anion | Is the counter-ion chloride? | Silver nitrate or ion chromatography | The chloride half of the salt | Cation | Is choline there, and how much? | HPLC or ion chromatography | The nutrient figure | Balance | Can the numbers belong to one salt? | Assay, choline, water, ash | Evidence against a blend The infrared spectrum is the release identity in the USP monograph, together with the chloride test on a 1 in 20 solution. The spectrum covers the whole molecule, so it separates choline chloride from choline bitartrate and from a blend with a carrier. A certificate that says “IR conforms” without naming the reference has added little. ## The ratio: 74.6 to 25.4 Choline chloride is a 1:1 salt. The choline cation is C5H14NO+ at 104.17 g/mol, the chloride ion is 35.45 g/mol, and the salt is 139.62 g/mol. The mass fractions are 104.17 ÷ 139.62 = 74.6% choline and 35.45 ÷ 139.62 = 25.4% chloride, so the mass ratio is about 2.94 to 1 and the molar ratio is 1 to 1. That arithmetic is a check, not a label. A lot at 99.0% assay should carry about 73.9% choline and 25.1% chloride, with the remainder water and trace impurities. If the chloride figure is high relative to the choline figure, the lot contains a chloride salt that is not choline chloride. If both are low, the lot is diluted. The pattern points to the type of substitution before any extra test is ordered. The USP assay is a silver nitrate titration of chloride, and each millilitre of 0.1 N titrant is equivalent to 13.96 mg of choline chloride. A sodium chloride addition raises that titration; the choline HPLC does not follow. That is why the two figures belong side by side, and why the assay basis — as-is or anhydrous — has to be stated. ## X-ray diffraction and the solid state Choline chloride is crystalline, so an X-ray diffraction pattern is a fingerprint of the solid. It can distinguish the salt from an amorphous carrier or a blend, and it can show sodium chloride as its own halite pattern when a chloride spike is crystalline. It does not measure choline and it does not prove the counter-ion on its own. Sample preparation matters. Choline chloride is deliquescent, and a damp sample can lose the sharp pattern that a dry, freshly milled sample gives. Dry and handle the sample the same way each time, and ask for the reference pattern and the detection limit before accepting a “match”. XRD is not a routine release test; it is a dispute tool, read alongside the choline and chloride figures. ## What substitution looks like Choline chloride substitutions and the signals | Substitution | What the buyer sees | What catches it | Sodium chloride | Chloride assay high; choline low; ash high | Choline HPLC, sodium by ICP-OES, mass balance | Potassium or ammonium chloride | Chloride assay high; choline low; pH may move | Choline HPLC, potassium or ammonium by IC | Betaine hydrochloride | Chloride assay passes; no choline peak; IR differs | Choline HPLC, IR, NMR | Urea or a nitrogen filler | Chloride and choline both low; nitrogen high | Kjeldahl nitrogen, IR, choline HPLC | Water | Loss on drying high; as-is assay low | LOD or Karl Fischer, anhydrous calculation | Carrier dilution | Both figures low; ash or fibre high | Assay, choline, ash, microscopy Colour and odour are weak signals. A white powder can be sodium chloride, and a fishy note points to amines rather than to the salt. The strong signals are the choline figure, the chloride figure, the ash and the sodium or potassium result. A certificate that reports only the chloride titration has left a likely substitution untested. ## Writing identity into the specification - “Choline chloride, CAS 67-48-1, C5H14ClNO, molecular weight 139.62.” - “Identification by infrared against a reference and by the chloride test; both conform.” - “Assay 98.0–101.0% by titration, with the titrant, the ion and the basis stated.” - “Choline by HPLC or IC; report the measured figure and the method.” - “Water ≤1.0% by loss on drying, or ≤0.5% by the USP method where the monograph applies.” - “Total amines within the agreed limit, reported as trimethylamine.” - “Sodium and potassium by ICP-OES where the chloride-to-choline ratio is disputed.” ## Five questions for the supplier - Which method and which ion does the assay measure, and on what basis is it calculated? - What is the choline figure by HPLC or IC, and what is the method? - What are the water, pH and total amine results for this lot? - Can you provide the infrared spectrum and the reference it was compared with? - Will you re-test the retained sample jointly if the lot is contested? Five answers of this kind make a file; one assay result does not. The product page carries the catalog values; the COA page maps each certificate line; the grades page covers the grade boundary; the ICP-OES note describes the sodium check; the quality page describes the release file. ### 01 What the hemicellulase COA contains, and what the unit leaves out URL: https://nutrition.rainwoodbio.com/products/enzymes/hemicellulase/coa/ Reviewed: 2026-11-20 The certificate for a hemicellulase lot reports appearance, identification by the activity assay, activity in U/g, loss on drying, particle size, the heavy-metal panel and microbiology. The activity row is the one that needs a definition behind it: hemicellulase is a class of enzymes, so a U/g figure describes the rate measured on one named substrate, at one pH and temperature, against one calibrant. The limits in the first table are the catalog specification; the batch COA is what confirms a particular pack. In one lineA hemicellulase certificate is a statement about one assay: the U/g figure, the substrate, the pH, the temperature and the calibrant are one fact, and none of them survives alone. ## Auditing the certificate row by row A certificate can be audited line by line when each row carries what was measured, the method behind the number and the limit the lot was released against. An enzyme row needs a fourth element, the assay conditions, because the same powder reads differently at another pH, temperature or substrate lot. Identification and activity are one measurement here: the assay on the named hemicellulose substrate is also the identity test. The class-level CAS number 9025-56-3 registers the name, not the composition. Release specification · hemicellulase powder | Parameter | Method | Release limit | Appearance | Visual | Off-white to light tan, free-flowing powder | Identification | Activity assay on the named hemicellulose substrate | Conforms to the reference | Hemicellulase activity | Reducing-sugar assay on the named substrate; unit definition stated | ≥50,000 U/g | Loss on drying | Gravimetric | ≤8.0% | Particle size | Sieve analysis | ≥95% through 80 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent ## The substrate, the calibrant and the basis An activity unit is a rate, not a mass: the usual definition is the amount of preparation that releases one micromole of reducing sugar equivalents per minute under the stated conditions. The substrate comes first, because hemicellulose is a family of polysaccharides — xylan and arabinoxylan, xyloglucan, mannan and galactomannan, mixed-linkage β-glucan — and a substrate prepared from plant material has its own composition. A xylan-rich substrate and a mannan-rich substrate do not give the same number for the same powder. The calibrant comes second. Reducing-sugar detection is read against a standard curve, and the standard may be xylose, glucose or mannose. Their response factors differ, so two laboratories can report 50,000 U/g for the same powder and each be correct inside its own definition. The mass basis comes third: a result per gram as received includes moisture, a result per gram of dry solids excludes it, and at the 8.0% limit the two differ by about 8.7%. State the basis and print the loss on drying beside the activity. The conditions complete the definition, and a preparation measured at its acidic optimum can read far lower at the neutral pH of a feed mash or a plant-protein extract. ## Limit, result and the result column The release limit is the acceptance boundary; the batch result is what the laboratory measured, in its own column, with the method and the date. A result column filled with the catalog range is a copy of the gate, not a result. Activity is one-sided, so a lot at 52,000 U/g passes and a lot at 85,000 U/g also passes; the result shows the headroom a process step has to consume. What belongs in the result column | Parameter | Release limit | Result column | Hemicellulase activity | ≥50,000 U/g by the named method | A measured U/g figure, with substrate, calibrant and basis | Side activities | Agreed limits, one per activity | A measured figure for each declared activity | Loss on drying | ≤8.0% | A measured percentage | Particle size | ≥95% through 80 mesh | The measured percentage through the sieve | Heavy metals and microbiology | Per element; counts and absence | A figure per element; the count and the absence statement Side activities need their own columns. A hemicellulase preparation carries xylanase, and usually mannanase, arabinase, xylosidase and a little cellulase; when those are agreed, each is measured by its own method and released against its own limit. None is added to the hemicellulase figure or inferred from it. Ask for the activity guaranteed at the end of the retest period as well as the release figure, because heat and time remove units between the two dates. ## What changes from lot to lot The fermentation sets the starting point: strain, medium, induction and harvest shift the balance of activities in the broth, and recovery and standardisation decide how much of that balance reaches the powder. Because the name covers a mixture, a change of strain can move the side-activity profile while the declared U/g still passes. The substrate lot moves the assay, so the laboratory should record the substrate source and lot with the result. Drying and milling move the activity as well: a wetter powder reads lower per gram, and a milling step that generates heat destroys activity before the sieve is reached. The 80 mesh figure is finishing, so it can change with the mill or the sieve alone. Colour is the least quantitative line and often the most revealing: a darker tan can follow a hotter dry or a longer hold while the activity still passes. A trend across lots says more than one result near an edge, and the lot code on the certificate should match the pouch, the drum and the retained sample. ## When an outside test earns its place An independent test is worth ordering for a new source, a first shipment into a regulated market, a use that depends on one declared side activity, or a disputed result. The useful panel repeats the activity on the retained sample by the buyer's method and by the method named in the specification, then adds protein, loss on drying, heavy metals by ICP-MS, microbiology and the side activities that matter for the process. Name those activities rather than asking for “hemicellulase”: xylanase, mannanase, arabinase and cellulase, each with its own substrate. Add a protease screen when the powder will sit in a liquid blend, because a protease in the preparation digests the enzyme it travels with. Ask for the detection limit on every screen; a “not detected” line without a limit describes the method, not the sample. The sample tested should be the retained sample, and the report should identify the lot. ## Comparing two quotations Put six lines side by side: the declared name with source organism and CAS number; the unit definition with substrate, pH, temperature and calibrant; the activity result and its basis; the side-activity profile with methods; loss on drying, particle size and carrier; and the lot code with the manufacturer. Two quotations that agree on U/g but differ on substrate or profile are not describing the same preparation. The catalog specification sits on the hemicellulase product page. The layers that prove a lot is the named preparation are on the identity page; the unit question against a single-enzyme product is on the xylanase page; the assay vocabulary is in the methods library; the release workflow is on the quality page. ### 02 Hemicellulase grades: activity, side activities and form URL: https://nutrition.rainwoodbio.com/products/enzymes/hemicellulase/grades/ Reviewed: 2026-11-20 Hemicellulase is sold by declared activity, by the side-activity profile behind that number and by physical form, not by a purity percentage. The catalog grade is an 80 mesh powder at ≥50,000 U/g by the named assay; a granulated form is a separate specification, and a blend or a dilution is a different product. Because the name covers a class of enzymes, the grade is the composition, not the word. In one lineThe grade of a hemicellulase is its declared activity, its side-activity profile and its form, and the name alone fixes none of the three. ## Why a purity figure does not exist for an enzyme A mineral salt carries a purity figure because the assay weighs the molecule against the rest of the drum. An enzyme preparation cannot be described that way: the powder is enzyme, fermentation residue and carrier, and activity is a rate rather than a proportion. The useful description is a declared activity on a named substrate, the profile of side activities, the carrier and the particle form. That is why two drums both labelled hemicellulase can behave differently. One may be xylanase-dominant and act quickly on wheat arabinoxylan; another may be mannanase-rich and work on a galactomannan stream. Both names are honest, and neither is the other's drop-in. The purchase order has not specified the material until the profile is attached. What the grade controls in a formula | Property | What it controls | Where it shows up | Activity (U/g) | How many units a gram delivers | Dose weight, label basis, overage | Substrate and unit definition | What the number counts | Comparability between suppliers | Source organism | Which enzyme mixture and which file | Identity, stability, permitted use | Side-activity profile | What else the preparation does | Substrate fit, assay interference | Carrier | What the activity sits on | Ingredient list, moisture, flow | Particle size and form | How the powder flows and disperses | Blend uniformity, dust, mixing time ## The options on the table The catalog form is a ≥50,000 U/g powder at 80 mesh. Granulation is available on request and is a separate specification, not a packing choice. Where a lower-activity dilution is agreed, it is a new specification with its own certificate; a blend with another enzyme is a different product again. The options and what changes when you switch | Option | Activity | Physical form | What changes in the formula | Standard powder | ≥50,000 U/g | 80 mesh powder | Smallest dose weight; concentrate for blends | Granulated (on request) | Agreed in the specification | Granules | Less dust; slower dispersion; measure granulation loss | Dilution (separate specification) | Agreed in the specification | Powder | Larger dose weight; carrier becomes an ingredient | Blend (different product) | Each activity declared | Powder or granule | Several activities; assay, label and file all change The activity figure is comparable only when the unit is. A U/g from one supplier and a unit named by another are not the same measurement unless the substrate, pH, temperature and calibrant match; the COA page sets out what belongs beside the number. ## Powder flow and airborne dust The catalog particle size is ≥95% through 80 mesh: a fine powder that blends into a dry mix and dissolves in water to a clear to slightly turbid solution. The same fine fraction that disperses quickly is the one that becomes airborne. Enzyme powders are respiratory sensitisers, so dust is a handling and documentation question — extraction at the source, closed transfer, a suitable mask and the hazard statements on the safety data sheet. Granulation trades dust control against dispersion speed. A granule wets more slowly, which suits a plant handling kilos a day and can fail a drink mix that needs fast dispersion. The granulation step itself removes activity, so the after-step figure belongs in the specification. The carrier is not inert. A dilution adds mass, may hold moisture and must be declared if it has a function in the finished product. Get the carrier identity and its ratio written into the specification. ## Unit arithmetic and weighability Multiplied by the weighed mass, activity per gram gives the units charged. A process that needs 1,500,000 U takes 30 g of a 50,000 U/g powder; at 100,000 U/g the same units weigh 15 g. Inside one unit definition the units are identical; the mass and the ingredient declaration are not. Weighability usually settles the choice. A 30 g charge is routine in production and awkward in a small pilot, where the balance and the mixer struggle with a speck of powder. A dilution makes the units weighable and carries the carrier through the formula and into the declaration. Two cautions sit beside the arithmetic. The label basis has to say whether activity is guaranteed at release or at the end of the retest period, because heat and moisture remove units between the two. And a diluted grade needs a certificate for the diluted lot, not for the concentrate it came from. ## Writing the grade into a specification The lines below turn a grade into something a laboratory can release against: - “Hemicellulase preparation, CAS 9025-56-3, with the production organism and strain stated.” - “Declared activity ≥50,000 U/g, with substrate, calibrant, pH, temperature and incubation time stated.” - “Activity basis: as received or dry solids; release or end of retest period.” - “Side activities — xylanase, mannanase, arabinase, cellulase — each with its own method and limit where agreed.” - “Carrier identity and ratio; loss on drying ≤8.0%; particle size ≥95% through 80 mesh.” - “Form: powder at 80 mesh, or granule; intended use and destination market confirmed.” Write the activity as a one-sided limit (“not less than”) and keep the unit definition in a method appendix under change control. Move the substrate or the conditions and two results stop being comparable, however similar the U/g looks. The catalog values are on the hemicellulase product page; the checks that keep a diluted lot honest are on the identity page; the single-enzyme comparison is on the xylanase page; the method vocabulary is in the methods library; the release workflow is on the quality page. ### 02.1 Hemicellulase vs xylanase: two names, two units URL: https://nutrition.rainwoodbio.com/products/enzymes/hemicellulase/grades/hemicellulase-vs-xylanase/ Reviewed: 2026-11-20 Hemicellulase and xylanase are not two strengths of one product. Hemicellulase is a class name for preparations that break down hemicellulose, which includes xylan, xyloglucan, mannan and mixed-linkage β-glucan; xylanase is one enzyme inside that class, with its own EC number and its own assay. A hemicellulase U/g measured on a hemicellulose substrate and a xylanase U/g measured on xylan are different measurements, so neither can be converted into the other. In one lineHemicellulase is a class of activities and xylanase is one defined enzyme, so their units stay separate even when the same powder carries both. ## A class name against a single enzyme Hemicellulose is the part of the plant cell wall that is neither cellulose nor pectin: arabinoxylan and glucuronoxylan in cereals, xyloglucan in dicot walls, galactomannan in legume seeds. No single enzyme breaks that mixture down. A preparation sold as hemicellulase contains several glycoside hydrolases, usually with xylanase as the dominant activity, plus β-mannanase, α-L-arabinofuranosidase, β-xylosidase, β-glucosidase and acetylxylan esterase. Xylanase is one endo-action on the β-1,4-xylosidic backbone, EC 3.2.1.8. That is why the class name has no EC number of its own. The number 9025-56-3 registers the name hemicellulase, not a single protein or a fixed composition. The class name and the single enzyme compared | Property | Hemicellulase | Xylanase | What the name covers | A preparation class: several hemicellulose-degrading activities | One enzyme: endo-1,4-β-xylanase | EC number | None of its own; the components carry theirs | 3.2.1.8 | CAS number | 9025-56-3 | 9025-57-4 | Main substrate | The named hemicellulose fraction, often xylan-rich | Xylan and cereal arabinoxylan | What U/g counts | Reducing sugar released from the named substrate per minute | Xylose equivalents released from xylan per minute | Trade unit | U/g, or a supplier-defined HCU/g | U/g or XU/g ## Two units that never convert Both names are traded in U/g, which is where most confusion starts. A unit is a rate defined by an assay, and the assay fixes the substrate, the pH, the temperature and the calibrant. Change any of those and the same powder gives a different number. A hemicellulase unit and a xylanase unit therefore sit on separate scales even when both are written “U/g”. How the trade units differ | Unit | Measured on | What it counts | Convertible to the other? | U/g, hemicellulase | Named hemicellulose substrate | Reducing sugar released per minute | No | U/g or XU/g, xylanase | Xylan | Xylose equivalents released per minute | No | HCU/g | Supplier-defined hemicellulose substrate | The supplier's reducing-sugar method | Only inside that method | U or IU, undefined | Must be stated | One micromole per minute under the stated assay | Only if the definitions match What does transfer is the total number of units inside one definition. One kilogram of a 50,000 U/g hemicellulase carries 50 million units; half a kilogram of a 100,000 U/g lot of the same product carries the same 50 million. That arithmetic is exact and useful for ordering and blending. It says nothing about how those units relate to a xylanase U/g. ## What the substrate decides Both assays are reducing-sugar methods, and both depend on pH, temperature, incubation time, substrate concentration and a standard curve. The difference is what the substrate contains. A hemicellulase assay on a crude hemicellulose fraction measures whatever that fraction holds; if the fraction is xylan-rich, the result sits close to a xylanase measurement, but it is not identical, because the substrate preparation and the calibrant differ. A xylanase assay on a defined xylan is the narrower measurement. One assay can read the other's activity. A xylanase preparation will show activity in a hemicellulase assay, so a declared hemicellulase figure may largely be xylanase. That does not make the two numbers interchangeable. It means the side activities have to be measured and declared. A hemicellulase with no measurable xylanase on a sensitive xylan assay is unusual; it points to a mannanase- or arabinase-rich preparation rather than a fault. The pH and temperature of the process add another variable. A preparation measured at its acidic optimum may read far lower at the neutral pH of a feed mash or a plant-protein extract, and that is a measurement taken away from the assay window, not a weak lot. ## The profile is the product Two preparations at the same declared U/g can behave differently because the rest of the mixture is different. The profile is what tells the buyer which stream the powder fits. Reading a hemicellulase side-activity profile | Profile | What it suggests | Where it fits | Xylanase-dominant | A broad hemicellulase that does most of its work on xylan | Cereal feed, baking, xylooligosaccharide production | Mannanase-rich | A preparation aimed at galactomannan | Coffee extract, guar and locust bean processing | Mixed, several activities at comparable levels | A general hemicellulose preparation | Mixed non-starch polysaccharide streams | Cellulase-rich | A blend or a broad carbohydrase | Only where cellulose hydrolysis is wanted Ask for the profile on the certificate, each activity with its own method, not only in a marketing description. A profile that does not fit the product name is a substitution signal; a profile that has moved against the reference lot is a process signal. ## Choosing by target substrate Where the target is the xylan backbone and the file needs one defined activity, xylanase is the narrower tool: cereal-based feed, baking, or a process that converts xylan into xylooligosaccharides. Where the substrate is the mixed hemicellulose fraction and a broader profile helps, hemicellulase is the fit: a plant-protein extraction, a mixed fibre stream, or a process where mannan and xylan arrive together. A xylanase-dominant hemicellulase can look like a xylanase on the xylan assay, and in a process trial it may behave like one. It is still a different specification item with a different CAS number and a different composition. Substituting one for the other needs a written change control, a new certificate and a check of the regulatory file, not a unit conversion at the balance. Use both only as a designed blend, with each activity declared, measured and released on its own line. A single “total carbohydrase” number with no definition behind it specifies nothing. ## Specification and label wording Name the preparation and the production organism, then the declared activity with its unit and substrate. Where xylanase is a declared activity, add its EC number and its own limit; where the label names xylanase as the enzyme, do not let “hemicellulase” appear as though it were the same thing. State whether the activity is per gram as received or per gram of dry solids, and whether it is guaranteed at release or at the end of the retest period. A feed label states the species and the inclusion basis the authorisation covers. A food label states the enzyme when it works in the finished food, and takes the processing-aid route when it does not. Neither label should describe a health effect; this site makes no health claim. The catalog specification is on the hemicellulase product page; the formulation and grade questions are on the grades page; the single-enzyme catalog is on the xylanase page; the assay vocabulary is in the methods library; the release workflow is on the quality page. ### 03 Hemicellulase stability: heat, moisture and the pack URL: https://nutrition.rainwoodbio.com/products/enzymes/hemicellulase/stability/ Reviewed: 2026-11-20 Hemicellulase is bought as units, and the pack has to deliver them at the point of use. Water and heat are the two main causes of loss, and neither leaves a visible mark: a powder can keep its colour, its flow and its weight while the activity per gram has dropped. A sealed dry pack, a cool store and a validated hold for any liquid are what protect the number on the certificate. In one lineThe units on the certificate are a starting balance, not a promise at the point of use: moisture and heat spend them quietly, so the pack and the storage condition set the retest period. ## The sealed powder Release loss on drying is ≤8.0%. A powder above that figure is not automatically out of specification, but it is carrying water that will shorten the working life of the enzyme. The foil pouch is the barrier, and its value is lost the first time it is left open: each opening exchanges the dry headspace for room air, and the powder starts to pick moisture up again. Caking, clumping and slower wetting are the visible signs. Temperature sets the second clock. The comfortable window belongs to the source organism, and many hemicellulase preparations are happiest at ambient while losing activity quickly above roughly 60 °C; a thermostable variant may be specified where the process is hot. Write the store as a range, and let a cold pack come to room temperature before opening so that condensation does not form on the powder. Colour and flow are worth watching. A darker tan or a lumpy powder can follow a hot hold or a damp week while a single activity result still passes. A series of retained samples, each assayed by the same method, says more than one result taken near the limit, and the lot code on the pouch, the drum and the certificate is what makes that series traceable. ## The liquid case The powder dissolves in water to a clear to slightly turbid solution, and that is where the fastest losses happen. In water the enzyme meets microbes, a pH that can drift, proteases that travelled with it from the fermentation, and, in a plant, heat and shear. An open hold tank at ambient temperature is the worst case, and a clear bottle on a bench is not a container for a hold. Where a liquid is required, fix the pH, control the microbial load, chill the hold and keep it short, then prove the hold by assay before filling. A stability result obtained on powder does not answer a liquid question: the matrix, the process and the container each change the rate, and the liquid needs its own data. The process step usually costs more activity than the warehouse. Feed conditioning and pelleting, oven baking, juice pasteurisation and plant-protein extraction all push the enzyme far above its storage range for a short time. A preparation that is comfortable in a cool store can lose much of its activity in one pass through a hot line, and that loss will not appear on any incoming certificate. ## What removes activity Where hemicellulase activity goes during storage and processing | Factor | Effect on the preparation | Practical control | Heat | Protein unfolding; the rate of loss climbs steeply with temperature | Store cool; place the addition after the hot step | Moisture | Higher water activity, caking and microbial growth | Keep the liner closed; dry room; desiccant in the pouch | pH | The enzyme drifts away from its working window | Buffer the liquid; check the matrix before the trial | Proteases | Digest the enzyme in a broth, a blend or a hold tank | Declare side activities; separate addition points | Metal ions | Some preparations are inhibited at low concentration | Screen the matrix; ask the supplier for source data | Shear and foam | Unfolding at the air–liquid boundary | Gentle transfer; keep the pump and mixer settings low These factors compound. A warm, humid store costs more than either condition alone, and a warm solution at the wrong pH combines most of the table. The useful stability question is therefore specific: which pack, which condition, how long, and after which process step. ## Designing the stability trial Build the trial around the pack that will actually ship. Warehouse conditions of 25 °C/60% relative humidity and 30 °C/65% relative humidity cover normal distribution, and 40 °C/75% relative humidity adds a stress arm for the pack. Add a process arm when the customer's heat step is known, and model that step rather than a generic one. At each time point assay activity by the method used at release, and record loss on drying, appearance and microbiology. Keep the raw values, not a pass statement: an activity method has its own repeatability, and a movement smaller than that variation is noise rather than a trend. Name the pack and the lot family in the report so that the data can be matched to a purchase later. Ask for the summary for your pack, not for a generic powder. A 25 kg drum and a 1 kg pouch differ in headspace and in how often they are opened, and a repack has the history of neither. The COA page shows how the release activity is reported; the methods library explains the assay vocabulary. ## The formula changes the rate A dry blend looks safe because its water activity is low, yet a hygroscopic carrier or a salt can pull moisture toward the enzyme, so activity and loss on drying are checked after storage as well as at release. A capsule with a deliquescent ingredient is a small stability chamber of its own. A feed mash is wet and warm, and a pellet passes through conditioner and die. Dough goes into an oven; a plant-protein extract sits at a pH and a temperature that may be far from the assay window. Whether to overage is a label and stability decision, and it needs data behind it. An overage cannot repair a pack that admits moisture, and it cannot replace a process trial. Where the heat is unavoidable, the choices are a more thermostable preparation, a cooler or shorter step, addition after the heat, or a larger overage with evidence. Each one changes the specification, so each belongs in development rather than in a purchase order note. ## Setting the retest period No single shelf life is published for hemicellulase, because the pack and the storage condition decide it. The retest period is written on the specification and supported by the stability file for that pack, and the label states the activity guaranteed at the end of the period rather than the release figure. Before extending use, re-assay the retained sample. Do not extrapolate from a drum result to a repacked pouch, and do not extend on the assumption that the powder looks unchanged. The product hub lists the standard packs; the MOQ page covers pack and lead time; the xylanase page compares a single-enzyme preparation; the quality page describes the release workflow. ### 04 Hemicellulase MOQ, packs and the documents that travel URL: https://nutrition.rainwoodbio.com/products/enzymes/hemicellulase/moq/ Reviewed: 2026-11-20 Hemicellulase is offered in two packs: a 1 kg foil pouch and a 25 kg fiber drum, with 1–7 days between confirmation and dispatch. The minimum order is one pouch, and a quotation is only firm when the activity definition, the pack, the destination, the documents and the intended use are all named. In one lineThe 1 kg pouch is the smallest unit that can be qualified on its own: it has a lot code, a certificate and a retained sample, and a trial built on it can be repeated. ## Why one kilogram A pouch of that size carries enough for a bench trial, a pilot batch and a retention sample, with material left over for a second assay if the first result is disputed. It also ships as a parcel, which matters when a formulation team needs powder before the production schedule is settled. Every pouch is a commercial unit with its own lot code, not a scoop taken from a drum. Smaller quantities come from a larger lot and are repacked, which adds a handling step and a new pack identity. The enzyme is the same; the traceability is not. A drum, by contrast, lowers the handling per kilogram but ties up inventory for longer. Since activity falls with time and heat, the right order size is the quantity that can be used inside the retest period, and that is a quality calculation as much as a purchasing one. The minimum is not a nudge toward a bigger order. A buyer who wants 200 g for a feasibility study is asking for a repack, and the honest description is a repack, with its own lot code and handling record. ## The two standard packs Standard hemicellulase packs | Pack | Net weight | Typical use | Handling notes | Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal after opening; cool, dry store | Fiber drum | 25 kg | Production | Inner liner; lot code on drum and liner; keep the liner closed The catalog powder is 80 mesh, with ≥95% passing the sieve. Granulation is a separate specification with its own certificate, not a packing option, because the granulation step changes both the activity and the way the powder disperses. A dilution agreed at a lower activity is likewise a new specification, not a larger bag of the concentrate, and the carrier it introduces has to be declared. ## From confirmation to dispatch Standard orders leave within 1–7 days of confirmation. That window covers picking, the document set and handover to the carrier; it does not cover transit, customs or the customer's incoming release. A granulated grade or an unusual pack adds time, and the offer should show that separately. Ask for a dispatch date, not a range, and settle the Incoterm at the same time: it decides who books the freight and who clears entry. The pouch normally moves as a parcel and the drum as a pallet, so the two do not follow the same route. The certificate and lot papers travel with the consignment rather than after it. No cold chain is needed, but a container left in the sun or a loading bay in summer is an activity loss that no document will record. ## What makes a quotation firm Six details turn a price into an offer that can be compared: - The material. Hemicellulase, CAS 9025-56-3, with the production organism and the declared activity named. - The activity definition. U/g with the substrate, calibrant, pH and temperature; the side-activity limits where agreed; loss on drying, particle size, metals and microbiology. - The pack and quantity. Pouch or drum, with granulation or dilution quoted as separate specifications. - The destination. Delivery point, Incoterm and the market where the finished product will be sold. - The papers. COA, TDS, SDS, allergen and GMO statements, origin, and any statement the importer needs. - The use. Food process or feed, the process step and the inclusion route. A quotation without the unit definition or the intended use cannot be compared with another. The same powder may fit one market and sit outside the file for another, so the paperwork is part of the offer. Commercial terms are not published on this site; they belong on the quotation. ## Qualifying a pack The pouch is the unit a buyer qualifies. Assay it by the goods-in method, then check loss on drying, the side activities that matter for the process, heavy metals and microbiology. Keep a portion from that same pack. The lot code has to agree across the sample, the certificate and the quotation; without that link the trial result cannot be tied to the material that will be bought. A trial below a kilogram is a repack and not the catalog pouch. It comes from a bulk lot, carries a separate handling record and should be documented as such. Ask for the split in writing and file its lot code with the trial data, because the bench powder and the production drum may come from different lots even when both meet the same specification. ## Terms and change control Keep the commercial and quality terms on one page: Incoterm, pack, dispatch window, specification revision, lot certificate, retention sample, retest period and the change route. A quality agreement signed before the first production order is easier than the same discussion after a dispute. Four changes deserve their own clause for an enzyme: a new production organism or strain, a new carrier, a new assay method, and a shift in the side-activity profile. Any of the four can alter the activity figure or the regulatory file while the product name stays the same. The agreement should name who is told, how far ahead, and which lots are affected. If a lot fails the agreed specification, the evidence is the retained sample and a joint re-test by the named method, not a photograph of the drum. Name the referee laboratory before the first order. The catalog specification is on the hemicellulase product page. Release tests are listed on the COA page, the paperwork question is on the compliance page, and the methods library and quality page hold the assay and release references. The single-enzyme comparison is on the xylanase page. ### 05 The regulatory file for a hemicellulase preparation URL: https://nutrition.rainwoodbio.com/products/enzymes/hemicellulase/compliance/ Reviewed: 2026-11-20 Hemicellulase is handled as an enzyme preparation, and the file depends on the intended use: a food process, a feed additive, or a dietary ingredient in a finished product. Because the name describes a class rather than one protein, the source organism, the declared activity, the carrier and the use have to be named before a route can be checked. The buyer's regulatory team owns that decision; this page lists what the file should contain. In one lineA hemicellulase file is built on a named preparation, not on the class name, because the source organism, the activity and the carrier decide the route. ## What the file must hold Four records sit in the folder: the specification version for the preparation, the certificate that released the lot, the permitted use and label rule for the destination, and the change record for source, process, carrier and pack. The certificate speaks for one lot, the data sheet for the catalog specification and the safety data sheet for handling; none of them establishes the route. An enzyme file leans on the production organism. The same activity can come from a fungus or a bacterium, with a different working pH, a different temperature window and a different history of use, so the class name does not tell a reviewer what the file covers. Write the organism and strain into the specification before the regulatory question is asked. ## European Union routes For food use, the framework is Regulation (EC) No 1332/2008 on food enzymes. The preparation has to be covered for the specific use, and the position of the Union list should be checked in the current text for the enzyme and the use, because the list is not a static document. Coverage is tied to the enzyme, its source and its specification, so a broadly worded class entry does not automatically reach a preparation from another organism. For feed, the framework is Regulation (EC) No 1831/2003 on feed additives. Authorisations there are written by function, species and conditions of use, and they tend to name the activity rather than the class, so the preparation has to be matched to the entry that covers it. A food-enzyme route does not carry into feed, and a feed authorisation does not cover a food use. Great Britain and Northern Ireland are separate questions. Northern Ireland follows the EU framework; Great Britain keeps its own registers and labelling rules. The delivery address settles which one applies, and the buyer records that decision with the order. ## United States basis For a food use, the file needs the basis on which the preparation is permitted: a GRAS conclusion for the specified use, a GRAS notice, or an approved food-additive use. The supplier states the basis and the document behind it; the buyer confirms that it reaches the finished food and the process step. A bare claim that a preparation is “GRAS”, with no use and no source attached, cannot be filed. For a feed use, the preparation must fit an AAFCO ingredient definition or another permitted basis, and the label carries the species and the activity. If the material is instead positioned as a dietary ingredient in a supplement, that is a different file and a different question; the lot certificate does not settle it. ## Contaminant panel and market limits The panel is a finished-product calculation as well as a drum result. The table gives the catalog release panel; the destination text and the inclusion level or daily intake decide the final figure. Catalog contaminant panel for hemicellulase powder | Parameter | Catalog limit | What the file should show | Lead (Pb) | ≤3 mg/kg | Lot result, method and the calculation for the finished product | Arsenic (As) | ≤2 mg/kg | Lot result and method | Cadmium (Cd) | ≤1 mg/kg | Lot result and any category exception | Mercury (Hg) | ≤0.1 mg/kg | Lot result and method | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | The count and the absence statement for the lot Food law adds its own ceilings: Regulation (EU) 2023/915 in the EU and Directive 2002/32/EC for feed, as of this review, with the consolidated text as the reference. A feed dossier may also ask for mycotoxin and antibiotic-activity screens on the fermentation product. Those are not catalog release lines, but when a market asks for them they belong in the file with a method and a detection limit. ## Claim language Hemicellulase is a processing enzyme. Its activity describes what it does in a process, not a nutrient content, so a label should not give it a daily value or present it as a nutritional additive. In food, the ingredient list names the enzyme when it has a function in the finished food; where it has none, the processing-aid route applies. In feed, the additive name and the activity belong on the label in the form the market requires. No disease-related claim is available for this material, and this site publishes no health claim. “Non-GMO” and “GRAS” are assertions that need a basis in the source, the process and the use; without that basis they should not appear on a page or a label. Structure/function wording, where a market permits it, is reviewed against the finished product and sits apart from the specification and the certificate. ## The document list Assemble the COA with the activity, substrate and assay conditions, the side-activity results, loss on drying, particle size, heavy metals and microbiology; the specification version; the TDS and SDS; the organism and strain statement; the carrier statement; allergen and GMO statements; the origin record; the food-enzyme or feed-additive statement for the destination; and the stability summary for the pack. The product page holds the catalog specification, the COA page explains the lot certificate, and the MOQ page covers the documents that travel with the order. ## Pre-order checklist - The preparation, organism and declared activity are named, not only “hemicellulase”. - The intended use and the destination market are written down. - The food-enzyme or feed-additive basis reaches the preparation, the use and the species. - The specification fixes the unit definition, substrate, calibrant, pH, temperature and basis. - COA, TDS, SDS, allergen, GMO, origin and carrier statements are on file. - Contaminant results are converted to the finished product's dose or inclusion. - Source, carrier, assay and pack sit under change control, and the label has been reviewed. The xylanase page shows how a single-enzyme file is framed; the methods library covers the assay vocabulary, and the quality page describes the release file behind the certificate. ### 06 How to prove a hemicellulase lot is what the name says URL: https://nutrition.rainwoodbio.com/products/enzymes/hemicellulase/identity/ Reviewed: 2026-11-20 A hemicellulase lot is what the documents say it is only when several measurements agree: the declared activity on the named substrate, the protein behind that activity, the side-activity profile against a reference lot, and a lot code that links the powder to the paper. The class name is too broad to be proved by a single U/g figure, because a xylanase-dominant preparation, a mannanase-rich one and a blend can all return a plausible number. In one lineIdentity for a class name is a profile: the declared activity, the side activities and the source have to agree, and the lot code has to tie them to the pack. ## Five layers of evidence A certificate can carry the right product name and still fail to prove the material. The layers below run from paperwork to measurement to traceability, and a supplier who answers only the first has repeated the label rather than demonstrated the powder. Five layers of hemicellulase identity | Layer | Question it answers | Evidence | What it establishes | Paper | Are the product, source and CAS number named? | Name, CAS 9025-56-3, production organism and strain | Documentation only | Rate | Does it cut the declared substrate? | Reducing-sugar assay with the stated conditions | The declared activity | Protein | Is the rate carried by protein? | Protein content and specific activity | Not a spiked reducing sugar | Profile | What else is present? | Xylanase, mannanase, arabinase, cellulase and protease results | A side activity or a blend | Chain | Does the paper match the pack? | Lot code on certificate, pouch or drum, and retention sample | Traceability ## Two ratios worth calculating The first is specific activity: units per gram divided by protein per gram, which gives units per milligram of protein. A dilution pulls both numbers down together, so the quotient holds while the strength of the powder falls. A cut with high activity and little protein looks like a purified fraction; a normal activity sitting on a large protein figure suggests inactive protein, fermentation solids or a different recovery point. The quotient is only meaningful inside one assay and one protein method, but across lots of the same product it is a steady check. The second is the profile ratio, in particular xylanase against the declared hemicellulase activity. Xylan is the main hemicellulose, so a preparation with no measurable xylanase on a sensitive xylan assay is unusual; it usually means the product is mannanase- or arabinase-rich rather than defective. At the other end, a powder whose activity is almost entirely xylanase is a xylanase-dominant material sold under the broader name, which is legitimate when the profile is on the certificate. Neither quotient is a purity percentage. Together they show that activity and protein move together and that the preparation still resembles the reference lot. The COA page shows where these figures belong on the certificate; the hemicellulase versus xylanase comparison explains why the two units are measured separately. ## What XRD can and cannot show An enzyme powder is amorphous, so an X-ray diffractogram of it is a broad halo. The technique cannot name hemicellulase, point to the production organism or measure activity, and a sharp reflection in a commercial powder is more likely to come from a crystalline carrier or a mineral contaminant than from the protein. Protein crystallography needs a single crystal, not a blended drum. The narrower question is still worth asking. If a lot is disputed over its carrier or over an inorganic filler, XRD can show whether a crystalline phase is present and whether it matches the declared carrier. For identity, though, the evidence is the activity assay with its blank and standard curve, the protein figure and the profile against a reference lot. ## Substitution modes and signals Common hemicellulase substitutions and the signals | Mode | How it presents | What catches it | Dilution with carrier | Normal-looking powder, lower U/g than declared | Activity and protein both low, specific activity steady | Reducing sugar added | Assay reads high while protein stays normal | Blank, sugar screen, specific activity | Xylanase sold as hemicellulase | Plausible U/g, profile almost entirely xylanase | Mannanase and arabinase below the expected level | Different enzyme substituted | U/g plausible, process behaviour wrong | Profile, protein pattern, substrate fit | Heat-inactivated material | Appearance right, activity low | Activity against a reference lot, protein normal | Carrier changed without notice | Specification sheet unchanged | Carrier identity, change-control record | Wrong lot shipped | Certificate belongs to another container | Lot code on pack, certificate and retention sample Two of these modes pull in opposite directions: dilution lowers the activity, while added reducing sugar raises the assay reading. Running activity and protein on the same sample separates them. A 50,000 U/g powder with 2% protein and a 50,000 U/g powder with 10% protein are different materials even though the activity line reads the same. ## Identity lines for the specification A testable identity section names the product, the CAS number and the production organism, then the declared activity with substrate, calibrant, pH, temperature, incubation time and basis. It adds the protein or specific-activity range where agreed, the side activities that matter for the process, loss on drying, particle size, the carrier and the lot-code rule. The intended use belongs there too, because it decides which regulatory file applies. - “Hemicellulase, CAS 9025-56-3, produced by the named organism and strain.” - “Activity ≥50,000 U/g, with substrate, calibrant, pH, temperature, time and basis stated.” - “Side activities — xylanase, mannanase, arabinase, cellulase — each by its own method.” - “Protein or specific activity reported; carrier identity and ratio declared.” - “Lot code on certificate, pack and retention sample; identity test applied to every lot.” Two habits make identity routine. State which identity test each new lot receives — the strain statement, the profile against a reference lot, or both — and keep the unit definition in a method appendix under change control, since a change of substrate or conditions makes two U/g figures incomparable. ## Questions to put to the supplier - Which organism and strain produced this lot, and is it the source used for the reference lot? - What exactly is the unit: substrate, calibrant, pH, temperature, incubation time and mass basis? - What are the xylanase, mannanase, arabinase and cellulase results, each by its own method? - What are the activity and protein figures for this lot, and what specific activity do they give? - Which lot code connects the certificate to the pouch, the drum and the retention sample? Five direct answers amount to an identity file; one activity number does not. The product hub carries the catalog specification; the grades page compares the forms; the xylanase page is the single-enzyme comparison; the methods library explains the assay vocabulary; the quality page describes the release file. ### 01 What a keratinase COA has to show beside the U/g figure URL: https://nutrition.rainwoodbio.com/products/enzymes/keratinase/coa/ Reviewed: 2026-11-20 A keratinase certificate lists appearance, activity, identity, moisture, the heavy-metal panel, microbiology and particle size. The activity line deserves the closest reading: its U/g value depends on a keratin-substrate assay, and the substrate, pH, temperature and unit definition are not the same in every laboratory. The limits below are the catalog specification; the batch document confirms one pack. In one lineA keratinase figure is only an activity when the substrate, the assay pH and the unit definition are printed beside it. ## The certificate as a test report Each row should be readable on its own: the parameter, the method that generated the value, and the acceptance limit. A bare “conforms” hides all three. The activity row adds a fourth item, the unit definition, because a keratinase U is not a fixed quantity. Keratinase is a functional name: it covers a group of proteases that attack keratin rather than one molecule with a single registry entry. Identity therefore rests on the declared organism and on the assay, and the lot code connects the document to the pack. Release specification · keratinase powder | Parameter | Method | Release limit | Appearance | Visual | Off-white to light tan, free-flowing powder | Activity | Keratin-substrate assay; substrate, pH, temperature, time and unit definition printed | ≥50,000 U/g | Identification | Activity assay conform | Conforms to the reference | Loss on drying | Gravimetric | ≤8.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh An activity-conform identity line is thin evidence by itself. It shows a response, not the protein. Ask for the source declaration and the protein profile as well; the identity page explains what each one adds. ## As-is, dried basis and the unit definition The assay reads the powder as it arrives and reports units per gram of that powder. Converting to dry solids is a division: 52,000 U/g at 6.0% moisture becomes 52,000 ÷ 0.94 = 55,319 U/g on dried solids. Both figures are valid, but a buyer and a supplier who use different denominators are not comparing the same number. Unit definitions vary more than the arithmetic. In one keratin-azure method, a unit is the activity that lifts absorbance at 595 nm by 0.01 in an hour; in another, a unit releases a micromole of dye in a minute. The same 50,000 U/g label can therefore describe very different rates. The certificate should print the substrate, pH, temperature, incubation time, standard and calculation, and the method sheet should be available before the first order. Keratin does not dissolve like casein. The substrate is particulate and heterogeneous, so shaking, particle size and time change the release of dye or peptide. A method transferred to a second laboratory needs a correlation run on the same substrate, not an assumption that the unit is portable. ## The floor, the result and the shelf-life question ≥50,000 U/g is a floor, not a target. Two compliant lots, one at 51,000 and one at 90,000, will behave differently where the process consumes activity. Read the measured value, and ask whether it refers to release or to the end of the retest period. Release limit and result, side by side | Parameter | Limit | Result column | Activity | ≥50,000 U/g | A measured figure, with the unit definition and the basis | Loss on drying | ≤8.0% | A measured percentage | Heavy metals | Per element | A figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot | Particle size | ≥95% through 80 mesh | The measured percentage through the sieve Microbiology and metals are not single verdicts: each element and each count has its own result, and “passes” is a claim the reader should be able to verify. Repeatability matters too; a lot barely above the floor is less reassuring when the method's relative standard deviation is wide. ## Where lot-to-lot spread comes from Three operations move the number: fermentation, recovery and standardisation. The fermentation sets which proteins are made; the recovery decides how much survives; the carrier fixes the final units per gram. A change in any one of them can shift the activity without a change in the name. Colour is a weak indicator. A darker tan may reflect drying or hold time while the assay is unchanged. The stronger record is the lot code shared by certificate, pouch, drum and retained sample. ## When an outside assay is warranted An outside assay is worth ordering for a new source, a first consignment for a regulated use, a disputed figure, or a method the supplier does not run. Keep the panel focused: the named keratin assay, protein by a stated method, moisture, metals, microbiology, and a casein assay if the keratin-to-casein ratio matters. Send the method sheet with the sample. The laboratory needs the substrate, the definition and the calculation, not just a target. Ask for the limit of detection and the repeatability beside each result; a “not detected” without a limit describes the method's reach, not the sample's purity. For a dispute, the retained sample, the original certificate and the specification should go to the referee together. ## What to compare between suppliers Compare six things: the declared organism and strain; the activity with its definition and basis; moisture; metals and microbiology; particle size; and the pack with its lot code. Offers that match on 50,000 U/g but differ on substrate or definition do not describe the same activity. Traceability is the second layer: manufacturer, fermentation and recovery, carrier, and the change record. The catalog limits are on the keratinase product page; the grades page covers form and concentration; the identity page covers source and protein; the neutral protease pages show a soluble-substrate certificate; the methods index leads to assay notes; the quality page covers release. ### 02 80 mesh or granulated: choosing a keratinase grade URL: https://nutrition.rainwoodbio.com/products/enzymes/keratinase/grades/ Reviewed: 2026-11-20 The catalog keratinase grade is an 80-mesh powder at ≥50,000 U/g; a granulated form is available on request. The choice between them is about dust, flow and the mass that carries a unit target, not about a different enzyme. A dilution or a higher-activity concentrate would be a separate specification and should be quoted as one. In one lineThe grade changes concentration, particle form and carrier, while the substrate and the unit definition stay fixed. ## Concentration is a mass calculation A process is set to deliver a number of units per batch or per tonne of substrate, not a weight of powder. The concentrate supplies 50 units per milligram, so a target of 250,000 U per kilogram of substrate takes 5 g of the catalog powder. If the same enzyme is extended to 25,000 U/g, the same target takes 10 g and brings the carrier with it. The enzyme is unchanged; the mass, the carrier load and the weighing tolerance are not. That arithmetic drives the practical choice. A concentrated powder keeps the inclusion small, which matters in a blend with several minor ingredients. A more dilute grade can make a small unit target easier to weigh accurately, but it adds carrier and can separate in a hopper if the particle sizes differ. The activity on the certificate is not a purity figure: a 50,000 U/g preparation may be mostly carrier, and that is normal for a standardised enzyme. ## The forms and what changes Keratinase grades and what changes in the drum | Form | Activity | What it is | Fits | Watch | Catalog powder, 80 mesh | ≥50,000 U/g | The standard grade; carrier and source declared | Blends and processing trials with a small inclusion | Dust, static and small weighings | Granulated, on request | Same unit definition; re-measured after granulation | Agglomerated particles | Low-dust rooms and free-flowing blends | Heat and moisture of the granulation step | Dilution, development item | Lower figure fixed in the specification | Standard powder extended with a named carrier | Bulk handling where a larger mass is wanted | Carrier declaration; segregation in the blend The first two rows are catalog packs. The third is a specification exercise: it becomes a legitimate grade only when the carrier is named, the lower activity is written into the specification, and the certificate reports the result for the blend rather than the base powder. ## What the powder does in the room An 80-mesh powder passes openings of about 180 µm. It flows, it raises dust when poured, and it can carry a static charge that makes a small weighing fussy. Enzyme dust is a respiratory sensitiser, so local exhaust ventilation or a weighing booth belongs in the process description, together with gloves and eye protection. The safety data sheet covers the handling detail. Granulation can cut dust and improve flow, but the binder, the water or solvent, the drying temperature and any post-granulation milling all become part of the specification. Measure the activity after granulation; the base powder's figure does not describe the granule. With a blended dilution, check the particle size of the blend as well as the enzyme, because a coarse carrier and a fine enzyme can separate in a hopper or a bag. The powder dissolves in water to a clear to slightly turbid solution. That is useful for a liquid feed or a process step, but it is not an identity test: other proteins also dissolve. Colour is a weak check for the same reason. ## Dose is an activity calculation, not a weight Write the dose as units per kilogram of substrate or per tonne of feed, then convert to powder with the measured activity. At 50,000 U/g, one gram carries 50,000 units; a process that needs 200,000 U per kilogram of substrate uses 4 g per kilogram. If the granulated grade assays at 48,000 U/g after processing, the same target uses 4.17 g, so read the post-granulation figure rather than assuming the base value. Build the overage on evidence. Activity falls during storage and through a thermal process, and the size of the fall depends on the pack, the temperature and the time. A formulator who adds an overage without a stability result is guessing; one who measures the loss and then sets the overage is making a specification decision. The stability page sets out the data to ask for. ## What the specification should say - “Keratinase preparation, source organism and strain declared, ≥50,000 U/g.” - “The U is defined by the keratin-substrate assay; substrate, pH, temperature, time and standard are printed on the COA.” - “Result reported as-is; loss on drying ≤8.0%; ≥95% through 80 mesh.” - “Carrier named and quantified; a dilution is specified separately from the standard grade.” - “Activity re-measured after granulation or blending, not inferred from the base powder.” - “Heavy metals Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg; APC ≤1,000 cfu/g; E. coli and Salmonella absent.” A grade change is also a document change. The specification, certificate, label, blend calculation and stability summary move together, while the unit definition stays put. Switching to a dilution without rewriting those documents creates two materials under one name. ## When to keep the catalog grade Keep the 80-mesh powder when it already flows and the process can control dust. Granulation adds heat and moisture for no gain if the room is already fitted for powder handling. Do not dilute with a carrier that the customer's specification or the destination's label rules exclude, and do not move to a higher activity if the resulting scoop becomes too small to weigh reliably. The catalog entry sits on the keratinase product page. The COA page sets out the release lines; the level-four comparison explains why the substrate in the assay matters; the MOQ page covers packs and order quantities; the neutral protease pages show a different enzyme with its own unit; the methods index leads to the assay notes; the quality page describes the release workflow. ### 02.1 Keratinase vs protease: the substrate, the unit and the label URL: https://nutrition.rainwoodbio.com/products/enzymes/keratinase/grades/keratinase-vs-protease/ Reviewed: 2026-11-20 Keratinase is a protease, but not every protease is a keratinase. The difference is the substrate: a keratinase unit is measured on keratin, while a general protease unit is usually measured on casein or haemoglobin. The two units are not convertible, and a specification or label that omits the substrate has not named the activity. In one lineA general protease and a keratinase are not interchangeable: the substrate defines the unit, and the unit defines what the label can say. ## The substrate decides what the number means Keratin is a structural protein built for strength. Hair, wool and feathers pack it into a dense, cross-linked arrangement, and the disulfide bonds between cysteine residues make it resistant to the proteases that digest an ordinary dietary protein. A keratinase is useful because it works on that material. The assay has to use the substrate that matches the job. Assay substrates and what each one measures | Substrate | What it measures | Strength | Limitation | Keratin azure | Release of dye from a dyed keratin powder | Sensitive and readable in a spectrophotometer | The dye and the particle size are part of the method | Feather meal | Hydrolysis of native β-keratin | Close to a real feather process | Slow, heterogeneous and hard to standardise | Soluble keratin | Hydrolysis of a modified, dissolved keratin | Fast and repeatable | The modification may remove the resistance that matters | Casein | General proteolytic activity | Well-established and comparable | Does not show whether keratin is attacked A high casein figure is not a substitute for a keratin figure. Many proteases cut casein well and native keratin poorly. If the process uses feather meal or another keratin-rich material, the release assay should use a keratin substrate. ## 50,000 U/g is incomplete without its definition There is no single keratinase unit in common use. One method defines a unit as the amount of enzyme that raises absorbance at 595 nm by 0.01 per hour on keratin azure. Another defines a unit as the amount that releases one micromole of dye per minute. A third reports micrograms of tyrosine released under a fixed incubation. All three are called U, and the numbers they produce are not on the same scale. That is why a bare activity figure cannot be compared across suppliers. A powder at 50,000 U/g under a one-hour dye-release method and a powder at 50,000 U/g under a one-minute micromole method may differ by orders of magnitude in real performance. The certificate has to print the substrate, the pH, the temperature, the incubation time, the standard and the calculation. The specification has to carry the same definition. The unit is also a mass calculation. A process that needs 200,000 U per kilogram of substrate with a 50,000 U/g powder adds 4 g per kilogram. If the definition changes, the 4 g changes with it. The methods index sets out the calculation. ## Why a general protease is not a drop-in Most keratinases belong to the serine protease or metalloprotease families, and many share a catalytic mechanism with proteases that are not keratinolytic. What separates them is the ability to bind and hydrolyse compact keratin, not the mechanism alone. A neutral protease such as bacillolysin is a general proteinase: it works well on casein and soluble protein at neutral pH, and it may release some protein from a pretreated feather meal, but its unit is a casein unit and its performance on native keratin is a separate question. Process conditions move the comparison further. Keratin hydrolysis is often run warm and on the alkaline side, where the substrate swells and the enzyme is active. Reducing agents that break disulfide bonds can raise the rate, but they change the process as well as the enzyme, and they are not part of the powder's specification. A keratinase that performs well in one matrix may be ordinary in another; the data has to come from the matrix in question. The keratin-to-casein ratio is the practical fingerprint. Run both assays under the supplier's methods and compare the ratio across lots. A high relative rate on keratin is consistent with the name; a ratio that looks like a general protease is a reason to ask for the source record and the protein profile. The identity page sets out those checks. ## Keratinase and neutral protease side by side Two enzymes, two substrates, two units | Property | Keratinase | Neutral protease | Assay substrate | Keratin (azure, feather meal or soluble keratin) | Casein | Unit | U/g under the named keratin method | U/g under the named casein method | Working pH | Preparation-specific; often neutral to alkaline | Neutral, around pH 7 for the common casein method | Typical job | Hydrolysing feather, hair, wool and other keratin-rich material | Hydrolysing soluble protein in food, feed and technical processes | What the number shows | Activity on a resistant structural protein | General proteolytic activity on a soluble substrate | Label declaration | Enzyme name, keratin unit and source | Enzyme name, casein unit and source The table is a comparison, not a ranking. Each enzyme is the right tool for its substrate. The error is to read the two U/g figures as one currency and substitute one powder for the other on a unit-for-unit basis. ## What the label can say A feed or technical label should name the enzyme, the source organism, the activity in U/g, the substrate and conditions behind that unit, and the carrier. “Keratinase 50,000 U/g” with no method reference is a number without a definition; a buyer cannot check it and a regulator cannot compare it. “Protease” alone is broader still, because it covers enzymes with different substrates and different units. The label has to agree with the certificate and the specification. If the certificate reports activity on keratin azure and the label implies a casein unit, the documents describe two measurements. If the carrier or the source organism changes, the label and the regulatory file change with it. This page does not establish a dietary-supplement status for the material. A supplement use would need its own ingredient declaration, unit convention and regulatory review; the activity figure cannot simply be carried across from a feed label. ## When to specify which Specify keratinase when the substrate is keratin-rich and resistant: feather meal, hair, wool, horn or a process stream built on those materials, at the pH and temperature the preparation is designed for. Ask for the method sheet before the first order; the unit is only meaningful with it. Specify a neutral protease when the substrate is soluble protein and the process runs near neutral pH; the casein unit is the established measure there, and the neutral protease pages set out that specification. A blend is possible, but each activity needs its own unit, assay and label line. Do not replace one with the other on a unit-for-unit basis, and re-validate the process if the enzyme or its source changes. The catalog entry sits on the keratinase product page; the release lines are on the COA page; the concentration and particle options are on the grades page; the source and ratio evidence is on the identity page; the methods index leads to the assay notes; the quality page describes the release workflow. ### 03 Keratinase loses activity to heat and moisture; the process sets the shelf life URL: https://nutrition.rainwoodbio.com/products/enzymes/keratinase/stability/ Reviewed: 2026-11-20 Keratinase is a protein, so its activity falls when the powder absorbs water or a solution is held warm. The sealed powder is the more durable format; a liquid has a short working life and needs its own data. The pack and the process, not the certificate, set the shelf life. In one lineHeat and moisture destroy keratinase activity, and the pack, the feed process and the storage condition decide how much survives. ## The powder: moisture is the first enemy The specification allows up to 8.0% loss on drying at release. That figure is a gate, not a reserve for storage. Once a pouch is open, the powder equilibrates with the room; in a damp filling hall it can gain moisture within a shift. Because the assay is reported on the powder as weighed, water uptake lowers the activity per gram, and caking follows. Keep the pack closed between weighings, store it away from hot spots, and let a cold container reach room temperature before opening it, or condensation will form on the powder. Heat speeds the loss even when moisture is low. A sealed pack in a controlled store is not the same material as a drum left in a loading bay. Warm, damp protein unfolds and aggregates, and the activity does not return on cooling. ## The solution: a short working life The powder dissolves in water to a clear to slightly turbid solution. In solution, the enzyme is exposed to autolysis, microbial growth and pH drift, and activity falls faster than in the dry pack. Mix only the concentration the process needs, hold it for a validated time, and discard the remainder rather than storing it overnight. A preservative does not replace a hold-time study. Stabilisers can lengthen the life of a liquid, but the effect depends on the enzyme, the pH and the other ingredients. A polyol or a salt that protects one preparation may inhibit another. A stabilised liquid is its own specification, with activity measured at release and at the end of the hold. ## What drives the loss Factors that move keratinase activity during storage and use | Factor | What it does | Control | Heat | Unfolds the protein; the rate rises with temperature | Cool store; keep the process inside the validated window | Moisture | Raises loss on drying; promotes aggregation and caking | Sealed pouch; dry store; desiccant where the climate needs it | pH | Moves the enzyme away from its working range | Buffer the solution; check the pH of the process stream | Metal ions | Some inhibit, some activate; the effect is preparation-specific | Limit iron and copper contact; test the process water | Shear and foam | Denatures protein at air–liquid interfaces | Low-shear mixing; avoid over-agitation | Microbial load | Grows in a dilute solution and consumes the preparation | Hygienic handling; validated hold; filtration where suitable | Reducing agents | Cleave disulfide bonds and change the rate on keratin | Control as a process additive, not a routine stabiliser The factors combine. A warm, humid store is worse than either condition alone, and a warm solution at the wrong pH loses activity faster than a cold one at the right pH. The useful question is not whether keratinase is stable in general, but how much activity remains in this pack, at this condition, after this process. ## A stability protocol for the preparation Choose the pack and the climate, then set the time points. A warehouse study usually runs at 25 °C/60% relative humidity, with an intermediate arm at 30 °C/65%; an accelerated arm at 40 °C/75% tests the barrier. At each point, measure activity, moisture, appearance and microbial count, and keep the raw numbers. A summary that says “stable” without results is not evidence. For a feed or technical process, add a process arm. The conditioner, dryer or extruder imposes a heat and moisture load that no cabinet reproduces. Assay before and after the step in the real matrix; that loss, not a generic overage, sets the addition rate. ## The matrix changes the answer A mash, a mineral premix and a post-pellet liquid are three different environments. The mash carries water and its own enzyme activity; the premix brings salts that can shift pH or inhibit; the liquid brings a carrier, a preservative and a hold time. A blend with other enzymes adds further interactions, and the blend's stability is measured on the blend. Pelleting is the usual stress in feed. The conditioner adds heat and water, and unprotected protein loses activity with temperature and dwell. Adding the enzyme after the press avoids the conditioner but creates a liquid hold; a granulated grade may retain more through the press. The choice is made on activity measured after the step. ## How the shelf life is set Keratinase has no single shelf life that fits every pack. The retest period is assigned to a pack and a storage condition, and the data file for that combination has to support it. A figure that omits the pack, the climate and the tests is not a shelf life. Before extending the period, run the assay again on the retained sample. A bulk result does not carry over to a repacked container. The product page lists the packs; the MOQ page sets out the packs and the dispatch window; the identity page covers the assay; the neutral protease pages show the same logic for another enzyme; the methods index leads to the assay notes; the quality page describes release and retest. ### 04 Keratinase: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/enzymes/keratinase/moq/ Reviewed: 2026-11-20 Keratinase ships from a 1 kg foil pouch; the 25 kg fiber drum is the bulk pack. Standard packs leave in 1–7 days. Before a quotation is fixed, the supplier needs the preparation and source, the assay definition, the release specification, the pack, the destination and the use. In one lineOne kilogram is the smallest released pack, and it is enough to assay, trial and retain before a drum. ## Why the floor is one kilogram A kilogram is a working quantity. It fills a pilot reactor, leaves material for a retained sample, and can be sent to an outside laboratory without opening a second container. The pack is released as a lot, so the trial and the release document describe one batch. A smaller request is drawn from a larger lot and repacked: the enzyme is the same, but the chain from the original release to the sample becomes longer and harder to document. A drum lowers handling per kilogram and raises the inventory and the dwell time in storage. The minimum follows the pack and the traceability chain, not a sales threshold. A buyer who needs a few hundred grams for a bench test is asking for a split, not for a smaller catalog pack. ## Packs and what each is for Keratinase packs and what each one is for | Pack | Net weight | Use | Handling note | Foil pouch | 1 kg | Pilot, retained sample, outside assay | Reseal after opening; keep the lot label | Fiber drum | 25 kg | Production | Liner closed; lot code on drum and liner | Granulated, on request | 25 kg | Dust control and flow | Activity measured after granulation | Sample | Below 1 kg | Bench work | Drawn from a released lot; not an order pack The standard powder passes 80 mesh (≥95%). Granulation is a specification change, not a different bag: the certificate has to report the granulated material's activity, and the lead time can move. A dilution is quoted only when the carrier and the lower activity are written into the specification. ## Lead time and handover Standard packs are quoted at 1–7 days after order confirmation. The clock covers picking, paperwork and handover to the carrier; transit, customs and the customer's release sit outside it. A granulated batch or a non-standard pack is scheduled separately, and the quotation should show that date. Ask for a dispatch date and an Incoterm rather than a range alone. A pouch travels as a parcel; a drum needs a pallet. The lot documents belong in the same shipment, because an import hold is decided on the papers as much as on the powder. ## What makes a quotation firm Six details make two quotations comparable: - Preparation and source. Keratinase, with the production organism and strain named. - Assay. U/g, substrate, pH, temperature, incubation time and unit definition. - Release specification. Loss on drying, mesh, heavy metals and microbiology. - Pack. 1 kg pouch, 25 kg drum, or a granulated size agreed in writing. - Route. Destination country, port or address, and Incoterm. - Use. Feed, processing or industrial, and the market it is destined for. A quote that omits the assay definition or the use cannot be checked against a second offer. Commercial terms are issued with the quotation, not printed here. ## What the sample has to prove Use the first kilogram as a qualification lot. Run the keratin assay in-house or at a contract laboratory, check moisture and microbiology, and retain a portion. Keep the lot code with the results. A split below a kilogram is bench material: it leaves the released pack and gets its own handling record, so it cannot stand in for the 1 kg qualification lot. The powder in the trial and the powder in the drum can carry different lot codes even when both meet the specification. Record both codes in the trial report, and do not carry a result from one lot onto the other without an assay. ## What to agree before ordering Put the commercial and quality terms in one document before the first production order: Incoterm, pack, dispatch window, specification revision, lot COA, retained sample, retest period and the change-notification route. A quality agreement signed at that point is easier than a dispute later. If a lot fails the agreed limit, the dispute is settled on the retained sample and a joint assay by the named method, not a photograph. Name the referee laboratory and who pays for it in advance, and say how a return is decided. Appearance alone is a poor basis for a rejection on either side. The catalog entry is on the keratinase product page; the release tests are on the COA page; the use and document file is on the compliance page; the neutral protease pages show the same ordering logic for a different enzyme; the methods index leads to the assay notes; the quality page sets out the release steps. ### 05 Where keratinase is permitted, and what the file must show URL: https://nutrition.rainwoodbio.com/products/enzymes/keratinase/compliance/ Reviewed: 2026-11-20 Keratinase is offered as a technical enzyme preparation for feed and processing uses, and the regulatory route follows the use rather than the activity name. A feed additive, a processing aid and an industrial enzyme are three different files. The buyer's regulatory team confirms the route for the destination market and the finished product. In one lineThe intended use decides the route: a feed additive, a processing aid and an industrial enzyme are three different files. ## Start with the use, not the name The first question is what the preparation does in the process. An enzyme added to feed to change its digestion sits under feed-additive law. An enzyme used to hydrolyse a raw material before that material is further processed may be a processing aid, with a different set of rules. An enzyme used in waste processing or another step outside the feed and food chain is an industrial preparation, and those statutes may not apply at all. The same drum can be described three ways, and only one description fits the actual use. The second question is the preparation, not the word. Permission attaches to an organism, a strain, a fermentation process and a carrier, not to “keratinase” in the abstract. Two powders that both read 50,000 U/g can sit under different regulatory positions. The file should name the preparation and the use together. This page does not assert that the material is a dietary supplement ingredient. The catalog entry describes a technical enzyme; a supplement or food use would need its own route, and that route is not created by this page. ## European Union: feed additive first In the EU, a feed enzyme is a feed additive under Regulation (EC) No 1831/2003. The regulation requires an authorisation for the additive, the target species and the conditions of use before the product is placed on the market, and the entry is held in the EU register. The file should identify the entry that covers the preparation and the use, not only the enzyme activity. An EFSA opinion is tied to the strain and the process, so a different preparation needs its own evidence. As of this review, the register and the current consolidated text are the reference, and the buyer's team should check both before the first shipment. A preparation used as a processing aid, or outside the feed chain, may not need a feed-additive entry, but only if the use and any carry-over into feed or food are checked. “EU approved” is not a usable statement without the entry and the use beside it. The United Kingdom is two jurisdictions for this purpose. Great Britain keeps its own register and labelling rules; Northern Ireland remains under the EU framework. The ship-to address, not the buyer's headquarters, determines which one applies, and the order file should record that determination. ## United States: the use and the basis As of this review, a US feed use usually runs through an AAFCO ingredient definition and the FDA Center for Veterinary Medicine, or a GRAS position for the specific preparation. Ask which basis the supplier is claiming and read the document; a notice for one strain or carrier does not automatically cover another. The buyer then checks that the basis reaches the target species, the inclusion rate and the finished feed. For an industrial use, the feed and food routes may not apply, and the buyer's team checks the rules for that use separately. In every case, the specification, the certificate and the label should describe the same preparation, because the regulatory statement is only as good as the material it names. ## Contaminants and the calculation The catalog limits are release limits on the powder. Feed law sets limits on the feed material or the complete feed, and the enzyme is usually a small fraction of that. The file should show the conversion, not only the drum result. Catalog limits and what the market file adds | Parameter | Catalog limit | What the file should show | Lead (Pb) | ≤3 mg/kg | Lot result and the contribution at the use level | Arsenic (As) | ≤2 mg/kg | Lot result and the destination limit for the feed | Cadmium (Cd) | ≤1 mg/kg | Lot result and any category exception | Mercury (Hg) | ≤0.1 mg/kg | Lot result and the method | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Lot count and absence statement; feed hygiene rules | Loss on drying | ≤8.0% | Quality figure; it also sets the activity basis In the EU, as of this review, undesirable substances in feed are controlled under Directive 2002/32/EC, and the limit applies to the feed material or complete feed named in the directive, not to the enzyme concentrate. The buyer converts the lot result to the use level and compares it with the destination limit. A drum result below the catalog limit can still fail the finished-feed calculation if the inclusion is high. ## Claims and the specification statement This material carries no disease-related claim, and these pages describe the specification and the file rather than any effect in the animal or the consumer. “Keratinase activity ≥50,000 U/g by the named assay” is a specification statement. It is not a health claim and it is not an efficacy claim. A feed claim about digestibility or performance belongs to the authorised use and to the brand that makes it. The file can support identity, activity and purity; it cannot support a statement about what the finished feed does. The label artwork and the marketing copy should keep that line visible, and the claim review is separate from the certificate review. ## Documents for the file - Specification naming the preparation, the source organism and the unit definition. - Lot COA with result and limit in separate columns. - Technical data sheet covering activity, solubility, pH and the pack. - Safety data sheet, including dust-control and exposure sections. - Source and strain declaration, with the origin record. - Carrier and composition statement. - Allergen and GMO statements for the organism and the inputs. - Authorisation or registration reference for the intended use and market. - Stability summary for the pack, and the assay method sheet. ## Checks before the first order Market release checks for a keratinase lot | Check | Evidence | Use and market named | A memo covering feed, processing or industrial use, not only the substance | Preparation recorded | Organism, strain, carrier and process description | Regulatory entry confirmed | EU register entry, AAFCO or GRAS basis, or the GB position | Contaminants converted | Lot COA plus the use-level calculation | Label and carrier checked | Activity unit, source, carrier and storage on the pack | Claims reviewed | Substantiation file held by the brand | Change control agreed | Written route for a source, process or carrier change The catalog entry sits on the keratinase product page; the release lines are on the COA page; the source and activity evidence is on the identity page; the neutral protease pages show a food-enzyme route for comparison; the methods index leads to the assay notes; the quality page sets out the release steps. ### 06 How we prove a keratinase lot is the declared enzyme URL: https://nutrition.rainwoodbio.com/products/enzymes/keratinase/identity/ Reviewed: 2026-11-20 A keratinase lot is identified by four agreeing lines: the declared source organism and strain, a keratin-substrate activity assay with its unit definition, a protein profile that fits the preparation, and a lot record that ties certificate, pack and retained sample together. The U/g figure alone cannot do that work, because a different protease can be made to produce a number on the same assay. In one lineA keratinase lot is identified by its source, its keratin assay, its protein profile and its lot record together, not by the U/g figure alone. ## The four identity layers The layers answer different questions. A source statement names the organism; an activity assay shows that the preparation hydrolyses keratin under the declared conditions; a protein profile shows whether the powder looks like the qualified material; a lot record shows that the document and the pack describe the same batch. A supplier who answers only the assay has shown activity, not identity. Identity checks · question and evidence | Layer | Question | Evidence | Source | Which organism and strain were fermented? | Strain declaration, origin record, fermentation description | Activity | Does it hydrolyse keratin at the declared rate? | U/g with substrate, pH, temperature, time and unit definition | Protein | Does the profile fit the preparation? | Total protein and a gel or chromatographic profile | Record | Does the paperwork point to this pack? | Lot code, COA and retained sample Keratinase is a functional name rather than a single molecular identifier. That makes the source and the method more important, not less: the name describes what the enzyme does, and the file has to describe which preparation does it. ## The keratin-to-casein ratio Total protein can be measured by Bradford, BCA, Kjeldahl or another named method, and each carries a bias. The more revealing number is the ratio of activity on keratin to activity on casein, run under the two methods the supplier uses. A preparation that cuts both substrates at similar rates is a broad protease; a preparation with a high relative rate on keratin is doing the job the name describes. The ratio is a fingerprint, not a purity figure. The arithmetic is simple. If a lot reads 50,000 U/g on keratin azure and 20,000 U/g on casein, the keratin-to-casein ratio is 2.5. A general protease may show the reverse pattern: high casein activity and modest keratin activity. The absolute numbers depend on the two methods, so compare the ratio inside one supplier's method set, not across laboratories. A ratio that drifts across lots points to a change in the fermentation, the recovery cut or the standardisation. Specific activity, U per milligram of protein, is a second trend line. A carrier lowers both activity and protein, so the ratio holds. Heat damage lowers activity while protein is still measured, so specific activity falls. Neither number is a universal cutoff; both are useful when the method is held constant. ## X-ray diffraction is the wrong identity test A dried enzyme powder is amorphous, so an X-ray diffraction pattern is a broad halo rather than the sharp reflections of a crystal. The halo can look similar from lot to lot without showing which protein is present. XRD is useful for a different question: it can detect a crystalline carrier or a crystalline contaminant, and it can show that a sample is not the crystalline material a certificate claims. A matching diffractogram is not proof that a lot is keratinase. The identity case rests on the source, the keratin assay and the protein profile. If a customer specification requires XRD, use it as a composition check and put the identity claim on methods that can support it. ## Routes that can satisfy a weak test Substitution routes · what passes and what detects them | Route | What passes | What detects it | Carrier dilution | The blend still assays at the declared U/g | Carrier declaration, mass balance, specific activity | Another protease | Keratin is cut, and the assay responds | Keratin-to-casein ratio, protein profile, strain record | Heat-killed powder | Protein and colour remain | Activity falls and specific activity falls | Assay tuning | A higher number under a different substrate or time | Method sheet, unit definition, independent assay | Different source | The word “keratinase” covers it | Strain statement, origin record, supplier audit These rows are checks, not charges. Most shipments match their paperwork. A single U/g result covers one row; the other rows need the method sheet, the protein profile and the source record. A gel pattern is a quick view of whether the protein looks like the qualified material, and the strain record is a quick view of whether the organism matches the declaration. ## A specification that can be checked - “Keratinase preparation; production organism and strain declared; ≥50,000 U/g.” - “The U is defined by the keratin-substrate assay; substrate, pH, temperature, time and standard are printed on the COA.” - “Activity reported as-is, with loss on drying ≤8.0% beside it.” - “Protein and specific activity reported, with the protein method named.” - “Keratin-to-casein activity ratio reported where the identity is disputed.” - “Carrier and any second enzyme activity declared; no undeclared diluent.” - “Particle size ≥95% through 80 mesh; heavy metals and microbiology as listed.” The final lines carry weight. A dilution is acceptable only when the carrier is written into the specification and the certificate, not left to an email. A second enzyme activity follows the same rule: if the powder contains one, the description says so. ## Five questions before qualification - Which organism and strain were fermented, and what is the origin record? - How is the U defined — substrate, pH, temperature, time and standard? - Was the assay run as-is or on dried solids, and what did the lot's moisture test show? - Which protein method was used, and what keratin-to-casein ratio did the lot give? - Does the powder contain a carrier or a second enzyme activity, and which document declares it? If the method answer is “standard”, ask for the sheet. A carrier answer of “none” should come with a mass balance. The product page carries the catalog limits; the COA page shows where each answer lands on the certificate; the grades page covers dilution and granulation; the level-four comparison covers the substrate question; the neutral protease pages show the casein-based route; the methods index leads to the assay notes; the quality page describes the release workflow. ### 01 What the COA for anhydrous magnesium sulfate has to show URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-sulfate-anhydrous/coa/ Reviewed: 2026-11-20 The certificate for an anhydrous magnesium sulfate lot reports magnesium by complexometric titration, sulfate by precipitation or ion chromatography, loss on drying, the heavy-metal panel and microbiology. The catalog sets magnesium at 19.0–20.5% and loss on drying at ≤1.0%; the drying result is what keeps the word “anhydrous” honest. A magnesium figure without it cannot separate this salt from a partly hydrated lot. In one lineOn an anhydrous certificate the magnesium figure, the loss on drying and the sulfate identity have to agree, because the water line is what separates this salt from a hydrate. ## The certificate as a test report The certificate is readable only when each row carries the parameter, the method and the limit the lot was released against. “Conforms” is a conclusion, not evidence, and it belongs on the identity row, while microbiology is reported as counts and an absence statement. For magnesium and loss on drying the reader needs a number. The sulfate row separates magnesium sulfate from the other magnesium salts. A complexometric titration counts magnesium and will pass for the chloride, the citrate or the oxide; the anion test is the part that names this salt. The drying row then decides whether the salt is the anhydrous grade or a lower hydrate. Identity, magnesium, water and contaminants · magnesium sulfate anhydrous | Parameter | Method | Release limit | Appearance | Visual | White to off-white powder | Identification | Magnesium and sulfate tests | Conforms to the reference | Magnesium | Complexometric titration | 19.0–20.5% | Loss on drying | Gravimetric | ≤1.0% | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Particle size | Sieve analysis | ≥95% through 80 mesh ## The magnesium basis, the drying result and the sulfate The magnesium figure is reported on the material as received, not on a dried basis. A powder sold as anhydrous is defined by carrying very little water, so drying it before the assay would hide the result the buyer is paying for. A lot with 4.0% loss on drying and 19.4% magnesium as-is would calculate to 20.2% on a dried basis, the theoretical figure for pure MgSO4; the dried number would look correct while the powder was not anhydrous. The two lines also check each other. At the theoretical 20.19% magnesium, a result of 19.0% corresponds to about 94.1% MgSO4. If the loss on drying is only 0.6%, the missing 5.3% is not water, so the certificate should account for it through the sulfate balance, sodium or another impurity line. The drying result decides which explanation fits. The sulfate is usually shown by the barium chloride reaction: a white precipitate forms in acidified solution and does not dissolve in dilute acid. Ion chromatography or gravimetric barium sulfate gives a figure where one is wanted. The reaction identifies the anion; the figure closes the mass balance, and a magnesium percentage alone has identified the metal, not the salt. Loss on drying is gravimetric under the conditions named on the certificate. It is not the same test as Karl Fischer water, and the two are not interchangeable across methods; the certificate should name the method so results can be compared from lot to lot. ## Release limit versus batch result The release limit is the gate; the batch result is the measurement. Both belong on the page, in separate columns, because a result column filled with the specification range is a copy of the gate rather than evidence. What the result column should contain | Parameter | Release limit | Result column | Magnesium | 19.0–20.5% as received | A measured percentage and the titration method | Loss on drying | ≤1.0% | A measured percentage, with the drying condition | Sulfate identity | Conforms | The reaction or instrument result and the reference | Heavy metals | Per element | A figure in mg/kg for each element | Microbiology | Counts and absence | The count and the absence statement for the lot A result of 19.7% magnesium with 0.4% loss on drying is a coherent anhydrous lot. The same magnesium with 1.4% loss on drying is outside the drying gate even though the magnesium sits inside its range, and it should not be released as anhydrous. The reader should see that from the two lines together, without a footnote. ## What moves between batches The dryer sets the loss on drying. Anhydrous magnesium sulfate is made by driving water out of a hydrate, and the last fraction is the hardest to remove; a shorter residence time leaves more water in the powder. The magnesium figure then drifts down on an as-is basis, so falling magnesium and rising loss on drying are one story, not two. Particle size and bulk density move with the finishing step. The catalog powder is ≥95% through 80 mesh; a change of mill, sieve or feed rate can shift the distribution while the chemistry is unchanged. Granulation is a separate specification, not a batch-to-batch variation. Sampling is the quiet source of variation for a hygroscopic salt. A subsample left open on a bench takes water from the air before it is weighed, so the loss on drying reads high and the magnesium reads low. Ask whether the sample was sealed before the test, and whether both results came from the same subsample. Colour is a weak signal: white to off-white covers a wide range. ## When to order an outside test Order an independent test for a new source, a first shipment into a regulated market, a disputed “anhydrous” claim or a suspicion that the lot is a hydrate or another magnesium salt. The useful panel is magnesium by complexometric titration or ICP-OES, sulfate by ion chromatography, loss on drying, chloride and sodium, the heavy-metal panel, microbiology and X-ray diffraction. XRD answers the hydrate question directly. The anhydrous salt, the monohydrate and the heptahydrate have different patterns, and a scan against a reference can show whether the powder is the phase named on the certificate. Protect the sample from air during preparation and scanning: a hygroscopic powder can pick up water and change phase before the pattern is collected. Ask for the reference pattern and the detection limit. The sample tested should be the retained sample, and the report should identify the lot. In a dispute, give the referee the retained sample, the certificate and the specification, and ask for the tests that separate the forms, not a repeat of the same titration. ## What to compare between suppliers Put six lines side by side: the form and CAS number; magnesium and loss on drying on the same lot; the sulfate identity and, where available, the sulfate figure; the particle-size result; the heavy-metal and microbiology results; and the pack with its lot code. Two offers that agree on magnesium but differ on drying or anion are not describing the same powder. The catalog line is on the anhydrous magnesium sulfate product page. The identity page sets out the sulfate, water and phase tests; the grade page covers the particle and hydrate boundaries; the titration method note explains the magnesium assay; the quality page describes the release file. ### 02 Anhydrous magnesium sulfate: the powder, the mesh and the hydrate line URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-sulfate-anhydrous/grades/ Reviewed: 2026-11-20 The catalog grade is the anhydrous powder: MgSO4, CAS 7487-88-9, 19.0–20.5% magnesium, loss on drying ≤1.0% and ≥95% through 80 mesh. Inside that grade the choice is particle form — fine powder or granulated — and each changes flow, dust and dissolution without changing the salt. The heptahydrate is a different product, not a coarser version of this one. In one lineThe grade decision is particle form and dryness, not magnesium percentage: a granulated or coarser anhydrous powder still has to meet the same loss on drying. ## Why the drying step is the grade Anhydrous magnesium sulfate is made by removing the water of crystallisation from a hydrate. The last part of that water is the difficult part, and a powder that still carries several percent is a lower hydrate or a partly dried lot, not a more concentrated anhydrous grade. The loss on drying is therefore the line that defines the grade, and the magnesium figure is read beside it rather than instead of it. The second axis is particle form. The catalog material is an 80 mesh powder; granulation is offered as a separate specification. It changes bulk density, flow, dust and the rate at which the powder dissolves, but it does not change the formula or the magnesium content. A granulated lot that still meets 19.0–20.5% magnesium and ≤1.0% loss on drying is the same salt in a different physical shape. The third axis is food grade versus technical grade, which is a documentation and contaminant question rather than a chemistry one. A technical grade can share the magnesium range and still fail the heavy-metal, microbiology or documentation lines that a supplement file needs. The grade name has to be read together with the specification and the certificate, not instead of them. ## The forms side by side Anhydrous magnesium sulfate forms and the hydrate reference | Form | Physical state | Magnesium | Water line | Typical use | Anhydrous powder, 80 mesh | White to off-white powder | 19.0–20.5% | Loss on drying ≤1.0% | Capsules, dry blends, stick mixes | Granulated anhydrous | Agglomerated granules | 19.0–20.5% | Loss on drying ≤1.0% | Dust control and flow | Heptahydrate, reference | Crystals or powder | 9.5–10.0% | Water 48.0–52.0% | A different product, not this grade The heptahydrate row is in the table to show the size of the boundary, not to offer another grade. Its magnesium content is about half the anhydrous figure because more than half of its mass is water of crystallisation. Comparing the two on magnesium alone makes the hydrate look weaker, when the real difference is the mass per dose and the water specification. ## Powder, granule and the handling difference The 80 mesh powder blends evenly and dissolves quickly, and it also makes dust. In a plant with open weighing, that dust settles on surfaces and takes water from the air; a granulated form reduces the dust and improves flow, at the cost of a slower dissolution step. The choice belongs to the process, not to the label. Bulk density moves with the form. A granulated material usually packs more mass into the same volume, which can reduce the hopper size or the sachet dimension, but the granule may disperse more slowly than the powder. Granulation changes the particle-size distribution and may add a binder; either way the granule is a separate specification with its own bulk density and flow, and it should not be ordered as “the same powder, coarser”. The powder is hygroscopic. It does not wait for a humid day to take water: an open container on a bench is enough, and the surface can cake while the centre remains free-flowing. The pack and the handling routine are part of the grade's performance, not an afterthought to it. ## The magnesium figure and the fill weight The label declares elemental magnesium, while the ingredient list names magnesium sulfate. At the theoretical 20.19% magnesium, 100 mg of elemental magnesium needs 495 mg of the anhydrous salt, 200 mg needs 990 mg and 300 mg needs 1,486 mg. A 500 mg capsule of the anhydrous powder carries about 101 mg of magnesium; a 1 g stick carries about 202 mg. Those numbers decide the dosage form. A 200 mg magnesium formula fits two 500 mg capsules of the anhydrous salt, or one larger tablet, or a 1 g stick. The same 200 mg from the heptahydrate needs about 2.03 g, a different capsule count and a different taste. The label calculation should use the specification midpoint or the measured result, not the highest possible figure. Dissolution is the other practical difference. The anhydrous salt hydrates as it dissolves and releases heat, so a concentrated stock warms up and a sealed bottle can build pressure. Add the powder to water with stirring and cooling, and do not cap a warm stock. In a dry blend the same reaction can take water from a hygroscopic partner, which is a reason to check the blend's moisture after mixing as well as the raw material's loss on drying. ## What to write into the specification - “Magnesium sulfate anhydrous, CAS 7487-88-9, MgSO4, white to off-white powder.” - “Magnesium 19.0–20.5% as received, by complexometric titration.” - “Loss on drying ≤1.0% by the gravimetric method named on the certificate.” - “Identification: magnesium and sulfate tests conform to the reference.” - “Particle size ≥95% through 80 mesh; granulated form only when agreed in writing.” - “Heavy metals and microbiology as listed; 1 kg foil pouch or 25 kg fiber drum.” - “The word anhydrous on the label is supported by the loss-on-drying result on the lot certificate.” A specification that names the form and the drying limit, but not the particle form, leaves the physical half of the purchase open. A specification that names the mesh but not the drying limit leaves the anhydrous claim open. Both lines belong in the same document. ## When the anhydrous grade is the wrong choice Choose the heptahydrate when the formula, the label and the market file were built around it, when the larger mass per dose is acceptable and when the pack can keep the crystal inside its water range. The anhydrous salt is not a drop-in replacement: it carries about twice the magnesium per gram, it takes water from the air and it releases heat on dissolution. A switch needs a new specification, a stability check and a label review. Do not choose the anhydrous grade only to shrink a capsule. The smaller fill is real, but the hygroscopicity, the dissolution heat and the label arithmetic change with it. Do not choose a technical grade for a supplement because the magnesium figure matches; the contaminant and documentation lines are the ones that decide the file. The product hub carries the catalog specification. The anhydrous versus heptahydrate comparison takes the water and label questions further, the heptahydrate page carries the other product, the COA page shows how the drying result is reported, and the methods section covers the assays. ### 03 Anhydrous magnesium sulfate takes up water; the pack sets the shelf life URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-sulfate-anhydrous/stability/ Reviewed: 2026-11-20 Anhydrous magnesium sulfate is chemically dull in a sealed pack; what changes is the water. The powder is hygroscopic and takes water from the air, the loss on drying rises and the as-is magnesium figure falls as the salt moves toward a hydrate. The pack and the storage condition, not the molecule, set the shelf life. In one lineThe anhydrous salt fails by taking water in, not by breaking down: every opened pack moves toward a hydrate unless the moisture barrier is restored. ## The powder: water comes in, not out The ≤1.0% loss on drying is a release gate and a storage indicator at the same time. It is a narrow window for a hygroscopic salt: an open dish in a humid room can move past the limit faster than a batch record suggests, and the first change is at the surface, where the powder cakes while the centre still looks free-flowing. The appearance of the top layer is not a measurement, but it warns that the pack has been open too long. The magnesium figure follows the water in the opposite direction. At 4.0% water a lot reads about 19.38% magnesium as received; at 6.0% it reads about 18.98%, below the catalog floor. The salt has not lost magnesium: the water has diluted the powder, and the as-is basis reports it. The magnesium and drying results have to come from the same subsample. Heat accelerates the change because warm air holds more water, and a cold pack opened in a warm room can condense moisture on the powder. Let a cold pack equilibrate in its closed liner before opening it. A hot loading bay or a sun-facing container is a poor store for any hygroscopic powder, because the seal and the liner age faster at temperature. ## The solution: heat, calcium and microbes The salt dissolves freely and the solution is close to neutral. Dissolution of the anhydrous form is exothermic, because the salt hydrates as it goes into water; a concentrated stock warms up, and a sealed bottle can build pressure. Add the powder to water with stirring, leave the vessel vented and allow the stock to cool before it is capped. Calcium is the compatibility question. Sulfate and calcium form calcium sulfate, which is sparingly soluble, so a drink or a mineral blend that contains both can develop haze, sediment or a lower free-calcium result. The water source itself can carry calcium and magnesium; a hard water trial is part of the formula work, not a detail for the filling line. Strontium and lead behave in the same direction as calcium, though at much lower concentrations. An unpreserved neutral solution is also a growth medium. A preservative or another hurdle, a validated hold time and a micro result at release belong in the liquid specification. Evaporation and cooling add a physical risk: a covered tank and a stated temperature window keep the concentration where the formula expects it. ## What moves the material Storage and matrix factors for anhydrous magnesium sulfate | Factor | Effect | Control | Humid air | Water uptake; loss on drying rises; as-is magnesium falls | Foil pouch or lined drum; reseal after sampling | Warm store | Faster uptake; seal and liner age | Shaded, temperature-controlled store | Open pack | Surface caking; moisture moves inward | In-use period; smaller container; desiccant | Fine powder | More surface area; faster uptake | Granulated form where the process allows | Calcium in the matrix | Calcium sulfate haze or sediment | Compatibility trial; check the water source | Solution hold | Microbial growth; evaporation; crystallisation on cooling | Preservative or hurdle; covered tank; hold time The factors reinforce one another. A warm, humid store with an open liner combines heat, water and surface area, and a solution made from that powder starts with more water than the formula assumed. The useful question is what the salt does in a named pack, under a named condition, for a named period. ## A protocol that stresses the right direction Before the first sample goes in, fix the pack, the climate, the time points and the tests. A practical design pairs 25 °C/60% relative humidity for the warehouse with 30 °C/65% for a warmer market and 40 °C/75% for the accelerated arm. For this salt the humid arms carry the stress and a dry arm acts as the control. A liquid matrix needs its own arm at the process pH and heat load. Test loss on drying, magnesium, appearance and microbiology at each point, and add sulfate identity and XRD where the hydrate state is in question. Weigh the subsample quickly or in a controlled-humidity box, and record how it was handled. A sample that sat open while the balance settled can read wetter than the pack and send the study in the wrong direction. Report the individual results, not only a pass statement, and identify the pack and the lot family. A 1 kg pouch and a 25 kg drum differ in headspace, liner area and opening history; a result from one is not automatically a result for the other. ## The finished formula changes the answer In a capsule or tablet, the shell and the excipients can pass water to the fill, and the fill can take water from the blister. Check the loss on drying at release and after storage, and inspect the fill for caking. A hygroscopic fill is a two-way moisture question, not a single raw-material result. In a stick pack, the seal is the shelf life. A pinhole or a weak seam lets humid air in and the powder cakes at the top of the strip, while the rest of the pack still looks acceptable. Inspect the strip as well as the powder, and include the seal in the stability design. In a drink, the anhydrous salt adds a heat load as it hydrates, and the sulfate can remove calcium from the matrix. The bulk result is only the starting point; the drink's shelf life must be measured in the drink. In a wet granulation the salt hydrates, releases heat and takes water into the granule, so the drying step changes. ## How the retest period is set No single shelf-life number applies to the molecule. A retest period is assigned to a pack, a storage condition and a test panel, and the data behind it must come from the pack that ships. A number carried over from another pouch, another drum or another hydrate is not evidence for this pack. Water is the first indicator. A lot that stays at or below 1.0% loss on drying and keeps its magnesium inside the range is behaving as expected. A lot whose loss on drying climbs has taken water in, and the magnesium will follow. At the end of the retest period, test the retained sample before extending use; do not carry a bulk figure across to a repacked container. The product hub lists the catalog packs; the COA page covers the release tests; the ordering page covers pack and lead time; the grade page explains the particle and hydrate choices; the quality page describes the lot record. ### 04 Anhydrous magnesium sulfate: MOQ, packs and ordering URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-sulfate-anhydrous/moq/ Reviewed: 2026-11-20 The minimum order is 1 kg, supplied in a foil pouch; production ships in a 25 kg fiber drum, and the standard powder leaves in 1–7 days. A quotation needs the form (anhydrous, CAS 7487-88-9), the magnesium and loss-on-drying limits, the mesh, the pack and the destination. In one lineA one-kilogram foil pouch is the smallest released lot we can sample, test and trace, and for a hygroscopic salt the pack is part of the specification. ## Why the minimum is one pouch A kilogram of the anhydrous salt carries about 190–205 g of elemental magnesium, depending on where the lot sits in the 19.0–20.5% range. That is enough for a bench trial, a retained sample and an independent check of the magnesium, sulfate and drying results. It is also the smallest unit with its own lot code and certificate, which is the part that matters when a trial result has to be traced back to the powder that produced it. A smaller quantity is normally a split from a larger lot. The split adds handling, creates a second container and breaks the direct link between the sample and the drum it came from. For a hygroscopic material the handling is not neutral: every transfer exposes the powder to air, and the split container may carry a different moisture history from the parent pack. The 25 kg drum is the production unit, carrying roughly 4.75–5.1 kg of magnesium. It reduces handling per kilogram, but it also commits storage space and an in-use period. Once the liner is opened, the drum is on the clock, and the remaining powder has to be protected between samples. The minimum is a released-lot decision, not a volume incentive. ## Packs and formats Anhydrous magnesium sulfate packs and what each one needs | Pack | Net weight | Typical use | What to watch | Foil pouch | 1 kg | Trial, retained sample, small batch | Reseal after opening; lot code on the pouch | Fiber drum | 25 kg | Production | Inner liner; close after every sample | Granulated form | 1 kg or 25 kg | Flow and dust control | Separate particle specification | Split pack | On request | Bench trial below 1 kg | Repack record; new lot identity The foil is the moisture barrier and the seal is the weak point. A pouch that has been opened and folded over is not resealed in the same sense as a heat-sealed pack; the headspace now holds room air, and the powder at the surface starts to take water. For a long in-use period, transfer the remainder to a smaller dry container or use the pouch within the stated period. The drum relies on its inner liner. Keep the liner closed and tied between samples, stand the drum on a pallet rather than a concrete floor, and write the opening date on the label. A desiccant can help inside a secondary container, but it is not a substitute for a closed liner, and it should not be in direct contact with the powder unless the pack design says so. ## Lead time and dispatch The standard pack is quoted at 1–7 days from order confirmation. That window covers picking, document preparation and dispatch; it does not include the sea or air transit, customs clearance or the customer's own quality release. A granulation or a non-standard pack is a separate line and adds time, which the quotation should state rather than fold into the standard range. Ask for a dispatch date, not only a lead-time range. A 1 kg pouch usually moves as a parcel, while the 25 kg drum travels on a pallet; the Incoterm decides who books the freight and who clears entry. The certificate, packing list and lot label should travel with the material. If the certificate follows later, the warehouse is holding a drum it cannot release. ## What a quotation needs A comparable quotation answers six questions: - Product and form. Magnesium sulfate anhydrous, CAS 7487-88-9, MgSO4. “Magnesium sulfate” alone is ambiguous. - Specification. Magnesium range, loss on drying, sulfate identity, mesh, heavy metals and microbiology. - Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated variant. - Destination and Incoterm. Country, port or address, and the trade term. - Documents. COA, TDS, SDS, allergen, GMO, origin and the statements the importer needs. - Use and market. Supplement, food or another use, and where the finished product will be sold. A quotation that gives a magnesium percentage but no drying limit cannot be compared with an anhydrous quotation, because the two offers may describe different water contents. A quotation that gives a mesh but no particle-form statement is similarly incomplete. Commercial terms are stated in the quotation, not on this page. ## The sample is a lot The pouch is a lot sample, not a demonstration. Test loss on drying first, because it is the result most affected by handling: take a sealed subsample, weigh it quickly or in a controlled-humidity box, and compare the result with the ≤1.0% limit. Then test magnesium, sulfate identity, heavy metals and microbiology. Keep a retained sample from the same pouch, and make the lot code on the sample, the certificate and the quotation agree. A sample left open during weighing reads wetter than the pack. That is a handling artefact, not necessarily a batch failure, and it is hard to argue after the fact. Record the time between opening and weighing, and keep the subsample sealed until the balance is ready. If a result is disputed, the retained sample is the referee, not the powder on the bench. If the bench trial needs less than a kilogram, discuss it before ordering. A split is a repack: it carries its own handling record and may not share a lot with the production drum. Say so on the label, and keep its certificate separate from the drum's. ## Terms to settle before the first order Put the commercial and quality terms in one document: Incoterm, pack, dispatch window, specification revision, the COA per lot, the retained sample, the retest period, and the change-control route for particle form, pack and source. A quality agreement signed before the first production order is easier than the same discussion after a dispute. Returns and replacements follow the quotation and the agreement. A lot that misses the agreed specification should be handled on the retained sample with a joint re-test against the named method, not on a photograph of the drum. Agree which laboratory both sides accept and who commissions the referee test before the material ships. The product hub carries the catalog specification; the COA page lists the release tests; the stability page covers water uptake in storage; the MOQ glossary entry defines the term; the quality page describes the release and retained-sample record. ### 05 The regulatory file for anhydrous magnesium sulfate URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-sulfate-anhydrous/compliance/ Reviewed: 2026-11-20 Anhydrous magnesium sulfate is a magnesium source, and the file answers four separate questions: whether the form is permitted, which contaminants apply, how the label reads and whether a claim is open. In the EU, magnesium sulphate is listed in Annex II to Directive 2002/46/EC as a permitted supplement form; in the US, 21 CFR 184.1443 affirms magnesium sulfate as GRAS. The buyer's regulatory team confirms the route for the exact material, the dose and the destination. In one lineAnhydrous magnesium sulfate is a permitted magnesium source in the EU and a GRAS food ingredient in the US, but the hydrate, the route and the label still have to be checked for the destination. ## What the file contains The file holds four things: the specification version for the anhydrous salt, the certificate that releases the lot, the destination route with its limits and label rules, and the change-control record for source, particle form and pack. The technical data sheet answers the specification question, the certificate the lot question and the safety data sheet the handling question. None settles the route alone. “Anhydrous” is part of the identity, not a marketing adjective. A file built around a heptahydrate certificate does not cover a powder sold as anhydrous, even when both are magnesium sulfate and both are food grade. The specification, the certificate and the label have to name the same form, the same CAS number and the same drying limit. The destination decides which framework applies. Great Britain uses the GB register and GB labelling, while Northern Ireland follows the EU framework; the delivery address, not the buyer's headquarters, decides which one is in play. Record that decision with the order so the label and the citation can be checked later. ## European Union Directive 2002/46/EC sets the food-supplement framework, and Annex II lists magnesium sulphate among the permitted forms of magnesium. That listing is the starting point: Regulation (EU) No 1169/2011 governs labelling, Regulation (EU) 2023/915 the contaminants and Regulation (EC) No 1924/2006 the claims. Check the current consolidated text. The additive route is separate. Magnesium sulfate has an additive identity, E518, with a monograph in Commission Regulation (EU) No 231/2012. That monograph is written around a defined magnesium sulfate specification, and it should not be assumed to describe the anhydrous powder without checking the current entry. The buyer's team decides whether the supplement route, the additive route or both cover the intended use. On the label, the ingredient should be named in the form the file covers, and the nutrition declaration states elemental magnesium rather than the salt mass. A label that says “magnesium sulfate” without a form can be ambiguous when the file, the certificate and the weigh-up refer to the anhydrous salt. ## United States 21 CFR 184.1443 affirms magnesium sulfate as GRAS for direct addition to food under current good manufacturing practice. A dietary supplement is also a dietary-ingredient question under DSHEA, and the Supplement Facts panel under 21 CFR 101.36 declares elemental magnesium against the current Daily Value, 420 mg for adults and children four years and older as of this review. A GRAS affirmation for food use does not, by itself, write the Supplement Facts panel or settle a structure/function claim. The buyer's regulatory reviewer confirms that the ingredient basis extends to the finished product, the dose and the label. A structure/function statement needs substantiation and the DSHEA disclaimer. No disease-related claim is open in either market, and a magnesium claim is about the nutrient, not about the sulfate. The label reviewer signs that off separately from the certificate. ## Contaminants and limits Contaminant results are read at the finished-product dose, not only at the drum. The table below is a working reference for a supplement file; the destination's current text and the real daily intake decide the final limit. Contaminant checks for the anhydrous magnesium sulfate file | Parameter | Typical supplement reference | What the file should show | Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method, limit and the finished-product calculation | Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception that applies | Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result and method | Arsenic (As) | Customer or market limit | The agreed limit and the method, stated on the certificate The finished-product arithmetic is worth doing before the first order. A 1 g capsule made from an ingredient at 3.0 mg/kg lead carries about 3 µg of lead before any other component is counted; a two-capsule serving doubles that. The file should show the calculation against the limit for the supplement as consumed, not only the drum result. Loss on drying is not a contaminant. It is the line that supports the word anhydrous, and a lot above 1.0% is a specification failure even when every metal result is clean. Sulfate is the anion, not an impurity; a sulfate figure is part of the identity and the mass balance. ## Label and claims In the EU, a magnesium claim from the permitted list is available only when the finished product meets the conditions attached to it, including a significant amount of magnesium per daily portion. The claim is about the nutrient, not the sulfate, and the label calculation has to support it. In the US, a structure/function statement needs substantiation and the DSHEA disclaimer, and the Supplement Facts panel must declare the elemental magnesium correctly. No therapeutic, curative or preventative claim belongs on the page or the label. This site publishes the specification and makes no health claim. If the label uses the word “anhydrous”, the certificate has to support it with a loss-on-drying result inside the limit. If the label names the heptahydrate, the anhydrous certificate is the wrong document. ## Documents in the file - Specification naming the anhydrous salt, CAS 7487-88-9, magnesium range, loss on drying, mesh and pack. - Batch COA with methods, release limits and measured results for the same lot. - Technical data sheet and safety data sheet. - Allergen, GMO, origin and processing-aid statements. - Heavy-metal and microbiology results, with the method and detection limit. - Packaging declaration and the lot code that links the pack to the certificate. - The destination route, label review and claim review, held by the buyer's team. Start from the catalog entry, then attach the lot certificate. The COA page explains the certificate structure, the identity page the analytical evidence, the EU regulatory note the framework references and the quality page the release record. ## Checklist before the first order - Is the exact form, CAS number, drying limit and particle form named in the specification? - Do the magnesium, loss-on-drying and sulfate results describe the same lot and the same basis? - Is the destination route confirmed by the buyer's regulatory team, as of this review? - Do the contaminant results fit the finished-product limit at the real dose? - Does the label name the anhydrous salt and declare elemental magnesium correctly? - Are the source, process, particle form and pack under change control? ### 06 How we prove an anhydrous magnesium sulfate lot is the anhydrous salt URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-sulfate-anhydrous/identity/ Reviewed: 2026-11-20 An anhydrous magnesium sulfate lot is identified by four agreeing pieces of evidence: the document names the anhydrous salt and CAS 7487-88-9, complexometric titration gives about 20% magnesium, the sulfate reaction or ion chromatography confirms the anion, and loss on drying stays at or below 1.0%. The magnesium figure alone cannot tell this salt from the monohydrate or the heptahydrate. The water line and the anion are what make the identification. In one lineIdentity needs the magnesium, the sulfate and the water to agree: about 20% magnesium with less than 1% water is the anhydrous salt, and a 9.9% magnesium result points to the heptahydrate. ## The identity layers A certificate can carry the correct name and still leave the powder unproven. Each layer below answers a different question, and no layer can borrow evidence from another. A supplier who stops at the document has described the paperwork, not the lot. Identity layers for anhydrous magnesium sulfate | Layer | Question | Test | What it proves | Document | Is the anhydrous form named? | Name, CAS number, formula, drying limit | Paperwork only | Metal | Is the magnesium figure right? | Complexometric titration or ICP-OES | The metal, not the salt | Anion | Is the counter-ion sulfate? | Barium chloride reaction; ion chromatography | The sulfate salt | Water | Is the hydrate state anhydrous? | Loss on drying; Karl Fischer where agreed | The dryness, not the phase | Phase | Which crystal form is present? | X-ray diffraction | The solid form The water layer is the one that carries the product name. A salt that is 20% magnesium but 8% water is not the anhydrous grade, however the label reads. A salt that is 9.9% magnesium and 51% water is the heptahydrate, whatever the purchase order says. The magnesium and the water have to be read together before the form is named. ## The magnesium-to-sulfate ratio Pure MgSO4 is 20.19% magnesium and 79.81% sulfate by mass. The molar ratio is one magnesium to one sulfate; the mass ratio is 24.305 to 96.06, or about 1 to 3.95. A lot that reports 20.0% magnesium and 79.0% sulfate closes the mass balance, and the small gap is consistent with the measurement uncertainty and the loss on drying. The ratio is a diagnostic, not a routine release test. If the magnesium is low while the sulfate stays high, a sulfate-bearing diluent such as sodium sulfate is a likely explanation, and the sodium result will show it. If the magnesium is high while the sulfate is low, an oxide, hydroxide or carbonate is more likely, and the sulfate figure and the acid-insoluble residue will move. If both are low, the powder may carry an inert filler or a non-sulfate matrix. A blend can be built to land inside the magnesium range. Magnesium oxide is about 60% magnesium and sodium sulfate is about 32% sodium, so a formulator can mix them toward 20% magnesium while the sulfate and sodium figures move away from the pure-salt ratio. The titration alone will not see the difference. The anion, the sodium and the mass balance will. ## X-ray diffraction and the hydrate question X-ray diffraction answers the question the chemical tests cannot: which crystal phase is present. The anhydrous salt, the monohydrate and the heptahydrate have different diffraction patterns, and a scan against a reference can show whether the powder is the phase named on the document. This is the direct check on a disputed “anhydrous” claim. Sample preparation is the weak point. The powder is hygroscopic, so it can take water from the air and change phase between the scoop and the diffractometer. Prepare the sample in a dry box or a sealed holder, and ask how the laboratory protected it. A pattern collected from a damp sample can show a hydrate that was not in the drum. XRD is not a purity assay, and it does not measure the counter-ion. It complements the magnesium and sulfate results rather than replacing them. Ask for the reference pattern, the scan range and the detection limit before reading a “match” statement, and read a match without the reference as an unverified claim. ## What adulteration looks like Substitutions and blends to check in an anhydrous magnesium sulfate lot | Adulterant | What changes | Signal | Test | Heptahydrate or monohydrate | Water high; magnesium low | Loss on drying above 1.0%; Mg near 9.9–17.6% | Loss on drying, XRD | Sodium sulfate | Magnesium low; sodium high; sulfate high | Na above the agreed limit; Mg/SO4 ratio off | ICP-OES sodium, ion chromatography | Magnesium oxide or hydroxide | Magnesium high; sulfate low; alkaline | High Mg with low sulfate; pH rise | Sulfate by IC, pH, acid-insoluble residue | Magnesium chloride | Chloride high; sulfate low | Chloride above limit; low sulfate | Chloride by IC, sulfate by IC | Inert filler | Both magnesium and sulfate low | Residue high; mass balance short | Acid-insoluble ash, full mass balance Colour is the weakest signal. White to off-white powders look alike, and a blend can match the appearance of the pure salt without matching its chemistry. The stronger evidence is the anion, the sodium and chloride figures, the water result and the phase. A certificate that reports appearance and magnesium but not sulfate has left the most likely substitution untested. ## How to write identity into the specification - “Magnesium sulfate anhydrous, CAS 7487-88-9, MgSO4.” - “Magnesium 19.0–20.5% as received by complexometric titration.” - “Loss on drying ≤1.0% by the gravimetric method named on the certificate.” - “Identification by magnesium and sulfate tests; sulfate by ion chromatography where a figure is agreed.” - “Sodium and chloride limits where the source, the process or the market requires them.” - “XRD reference pattern available where the anhydrous phase is disputed.” - “No monohydrate, heptahydrate, sodium sulfate or other magnesium salt above the agreed limit; lot code and retained sample linked to the certificate.” ## Five questions for the supplier - Which form is this lot, and which CAS number and drying limit appear on the certificate? - What are the magnesium and loss-on-drying results, and did they come from the same sealed subsample? - What is the sulfate result and method, and does the magnesium-to-sulfate ratio close the mass balance? - What are the sodium and chloride figures, and are they inside the agreed limits? - Is there an XRD pattern, which reference does it match, and how was the sample protected from moisture? Five answers of this kind form an identity file; one magnesium percentage does not. The catalog entry carries the specification, the COA page shows where each figure sits, the grade page compares the forms, the heptahydrate page marks the boundary, the XRD method note explains the phase check and the quality page the retained sample. ### 02.1 Anhydrous vs heptahydrate magnesium sulfate: water, magnesium and the label URL: https://nutrition.rainwoodbio.com/products/minerals/magnesium-sulfate-anhydrous/grades/magnesium-sulfate-anhydrous-vs-heptahydrate/ Reviewed: 2026-11-20 Anhydrous magnesium sulfate and the heptahydrate are the same salt at two water contents. The anhydrous form carries about 20.2% magnesium and no more than 1% water; the heptahydrate carries about 9.9% magnesium and 48–52% water of crystallisation. For the same label dose the heptahydrate needs about twice the powder, and the label has to name the form that was weighed. In one lineAt about 20.2% magnesium against 9.9%, the anhydrous salt needs roughly half the powder for the same dose, and the water line is what separates the two forms. ## The water line is the product line The two forms are not a concentrate and a dilute version of one another. The heptahydrate is a crystal with seven water molecules built into its structure; the anhydrous salt is the same lattice with that water removed. The heptahydrate's water is stoichiometric, not a moisture allowance, so drying the crystal below 48.0% produces a lower hydrate rather than a stronger heptahydrate. The anhydrous salt is defined from the other side: its ≤1.0% loss on drying supports the name. Anhydrous magnesium sulfate against the heptahydrate | Property | Anhydrous | Heptahydrate | Formula | MgSO4 | MgSO4·7H2O | CAS number | 7487-88-9 | 10034-99-8 | Molecular weight | 120.37 | 246.47 | Magnesium | 20.19% theoretical | 9.86% theoretical | Water | Loss on drying ≤1.0% | Water 48.0–52.0% | Behaviour in air | Hygroscopic; takes water in | Efflorescent; gives water up | Catalog form | 80 mesh powder | 40 mesh powder or crystals The analytical methods differ with the line. The anhydrous certificate reports loss on drying, while the heptahydrate certificate reports water by Karl Fischer against 48.0–52.0%. The two results are not interchangeable, and a certificate that says “water” without naming the method has left the form ambiguous. ## Magnesium per gram and the conversion The conversion factor is fixed by the formula: 246.47 ÷ 120.37 = 2.048. One gram of the anhydrous salt delivers the magnesium in about 2.05 g of the heptahydrate, and one gram of the heptahydrate delivers what about 0.49 g of the anhydrous salt would. The factor belongs to the formula, not the batch. Salt mass needed for an elemental magnesium dose | Elemental magnesium | Anhydrous MgSO4 | Heptahydrate | 100 mg | About 495 mg | About 1,014 mg | 200 mg | About 990 mg | About 2,028 mg | 300 mg | About 1,486 mg | About 3,042 mg These figures use the theoretical content. A production lot at the catalog midpoint carries slightly less, so the label calculation should use the specification midpoint or the measured result rather than the theoretical maximum. The direction is what matters: the heptahydrate needs roughly double the mass for the same declared magnesium. ## What the label has to say The ingredient name and the magnesium declaration answer different questions. The ingredient list names the salt and its form; the nutrition panel declares elemental magnesium. A label that says “magnesium sulfate” without the form is ambiguous, because the same name covers the anhydrous salt and the heptahydrate. If the label says “anhydrous”, the certificate has to support that word. The magnesium figure is also an audit tool. A 500 mg serving of “magnesium sulfate” that declares about 100 mg of magnesium is consistent with the anhydrous salt at roughly 20% magnesium. The same 500 mg of the heptahydrate would declare about 49 mg. A label that matches neither form has a formulation or naming problem, and no certificate repairs that. In the EU, magnesium sulphate appears in Annex II to Directive 2002/46/EC as a permitted magnesium form for food supplements, and the label wording has to match the form in the file. In the US, the Supplement Facts panel declares the ingredient and the elemental magnesium. In both markets the claim review is separate: a magnesium claim is about the nutrient, not the sulfate. ## The fill, the capsule count and the taste The mass difference becomes a dosage-form decision. A 500 mg capsule of the anhydrous powder carries about 101 mg of magnesium; the same capsule of the heptahydrate carries about 49 mg. A 200 mg magnesium serving therefore needs two 500 mg anhydrous capsules, or about 2.03 g of the heptahydrate, which is four 500 mg capsules plus a remainder. A stick pack shows the same arithmetic. A 1 g anhydrous stick carries about 202 mg of magnesium; a 1 g heptahydrate stick carries about 99 mg, so the heptahydrate formula usually moves to a 2 g stick for the same dose. The larger mass brings more powder to disperse, a stronger bitter and saline taste and a different osmotic load. Dissolution adds a handling difference. The anhydrous salt hydrates as it dissolves and releases heat, so a concentrated stock warms up; the heptahydrate is already hydrated and does not carry that heat load. In a dry blend, the anhydrous powder can also take water from a hygroscopic partner. ## The pack protects against opposite failures Both products ship in a foil pouch and a lined fiber drum, but the failure modes are opposite. The anhydrous salt takes water in: a humid store, an open liner or a folded-over pouch moves the loss on drying above 1.0%, the magnesium figure falls on an as-is basis and the powder cakes. The heptahydrate gives water up: a warm, dry store can push the crystal below 48.0%, and the powder that remains is a lower hydrate. A stability study follows the same split. For the anhydrous salt the humid arms at 30 °C/65% and 40 °C/75% relative humidity are the stress, and a dry arm is a control. For the heptahydrate the dry arm is the one that catches efflorescence. A pack that protects one form is not automatically the right pack for the other, even when the pouch looks identical. In use, the anhydrous pouch is the more demanding. Once it is opened, the headspace holds room air and the surface starts to hydrate; a desiccant can help in a secondary container, but it does not replace a closed liner. ## When to choose which form Choose the anhydrous salt when the formula needs a low water content, when the fill weight is the constraint, or when the matrix is sensitive to added moisture. It is also the form to consider when the powder is expected to act as a desiccant in a dry blend, provided the formulator accepts the water and heat it brings. Choose the heptahydrate when the formula, the label and the market file were built around it, when the larger mass per dose is acceptable and when the pack can keep the crystal inside its water range. It is not a weaker grade of the anhydrous salt; the two are separate specifications with separate certificates. A switch in either direction needs a new specification, a stability check, a label review and a new COA. Do not substitute one for the other at the weigh-up and adjust the number afterwards. The anhydrous product hub carries this specification; the heptahydrate hub carries the other; the COA page shows how the drying result is reported; the grade page covers the particle choices; the methods section explains the assays; the quality page describes the release file. ### 01 What the COA for maltase actually contains URL: https://nutrition.rainwoodbio.com/products/enzymes/maltase/coa/ Reviewed: 2026-11-20 A maltase certificate is built around one kinetic line: activity in units per gram, measured by the glucose released from maltose. The other lines describe the powder that carries that activity — appearance, loss on drying, mesh, metals and microbiology. The catalog floor is ≥100,000 U/g, and the batch document has to show the measured result, the method and the conditions behind it. In one lineA maltase result is a rate, so the certificate has to put the maltose substrate, the glucose detection and the assay conditions beside the U/g figure. ## The certificate as a release record Every row should say what was measured, how the laboratory measured it, and the acceptance limit for that measurement. A row that reports only “conforms” records a conclusion and hides the evidence. On an enzyme certificate the activity line carries the most weight, because it is the only line that measures what the powder does rather than what it contains. Catalog release specification · maltase powder | Parameter | How it is run | Limit | Appearance | Visual inspection | Off-white to light tan, free-flowing powder | Maltase activity | Maltose substrate; glucose released, reported in U/g | ≥100,000 U/g | Identification | Activity assay against the reference | Conforms | Loss on drying | Gravimetric | ≤8.0% | Particle size | Sieve analysis | ≥95% through 80 mesh | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count plus absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent CAS 9001-42-7 identifies the enzyme as a substance, not the lot in the drum. A usable certificate also carries the lot number, the preparation, the carrier and the production organism, because those four define the powder that was actually tested. Identification here is functional: the activity assay is the identity test, and there is no separate chromatographic identity line to fall back on. ## What one unit means, and what the basis changes A unit is the amount of enzyme that releases one micromole of glucose from maltose per minute under the conditions written in the method. The pH, the temperature, the maltose concentration and the way glucose is detected all decide how many units a gram appears to contain. The catalog names the substrate and the unit; the assay pH and temperature belong in the method appendix and on the technical data sheet. Glucose detection is usually enzymatic and colorimetric: the released glucose is oxidised and the colour is read against a standard curve. A blank is run without enzyme or without substrate, so that glucose already present in the powder or the carrier is not counted as enzyme activity. Without the blank, a sweet carrier can make a weak lot look strong. The assay is reported per gram of powder as sold. At the 8.0% loss-on-drying limit, a 100,000 U/g result as-is corresponds to about 108,700 U/g on a dry basis. The arithmetic is simple, but the two figures describe different powders, and a specification that mixes them can reject a conforming lot. The activity row should carry the basis explicitly, with the moisture result in the next column. A dilution made before the assay is a third basis question. The laboratory may dilute the powder to bring the reaction into range, but the result is calculated back to units per gram of powder as sold. If the buyer dilutes the powder into a blend, that blend is a new material and needs its own activity check; the certificate for the concentrate does not certify the blend. ## A floor, a measured result and the spread ≥100,000 U/g is a one-sided limit. A lot released at 103,000 U/g and a lot released at 180,000 U/g both pass, yet they leave different room for activity loss in storage and in a process. The useful number is the measured result; the limit only says the lot cleared the gate. The figure can be checked only if the certificate names the method, the assay conditions and the release date, and says whether it applies at release or at end of shelf life. A result close to the floor is not a comfortable margin if the pack is opened in a humid room or the blend is held warm. Ask also for the relative standard deviation of the assay; where repeatability is poor, a figure just above the floor is within the noise of the method. ## Where lot-to-lot spread comes from Fermentation variables — inoculum, medium, oxygen supply and harvest time — shift the protein mix in the broth, and the downstream concentration decides how much of that mix reaches the powder. Standardisation with a food-grade carrier then fixes the activity per gram at the declared target. Two lots can meet the same floor and still differ in protein content, colour and behaviour in a blend. Moisture and thermal history change the number after the broth is harvested. A lot dried to a higher residual moisture weighs more water per gram, so its as-is activity is lower even with intact enzyme; heat at the mill can also knock activity down before sieving. Mesh is a finishing parameter: a new mill or sieve can move the 80 mesh result while the enzyme itself is unchanged. Colour is a weak signal and deserves a note rather than a rejection. A darker tan can follow a longer dry without any assay failure. A trend across lots is more informative: activity drifting toward the floor, loss on drying climbing, or a growing glucose blank. The certificate, the shipping pack and the retained sample should all show one lot code. ## When an outside assay is worth buying An outside laboratory is worth paying for when the source is new, the market is new, a result is contested, or a label statement depends on the activity figure. A narrow panel is enough: a maltose assay on the retained sample, protein, moisture, the metal panel and the micro count. A protein pattern against a reference lot adds a second, non-activity check on identity. Method match is the whole point. The outside lab has to use the same maltose concentration, pH, temperature and glucose readout as the specification, or the comparison is between methods rather than powders. A report in “units” from an assay run on p-nitrophenyl glucoside is not a second opinion on a maltose-based U/g result; it is a different measurement. Ask for the blank, the standard curve and the detection limit, and require the lot code on both the sample and the report. ## Six lines for a supplier comparison Set the unit and method, the measured result and its basis, protein or specific activity, loss on drying and mesh, the metal and micro panels, and the organism with the carrier side by side. Agreement on the headline U/g can hide disagreement on five other lines, which means the powders are not interchangeable. The difference shows up in the first trial rather than in the offer. The catalog values are on the maltase product page. For identity evidence, see the identity page. Method families are collected under methods, and the quality page describes the release workflow. ### 02 Maltase grades: the 80 mesh powder and the granule URL: https://nutrition.rainwoodbio.com/products/enzymes/maltase/grades/ Reviewed: 2026-11-20 Maltase has one catalog activity, ≥100,000 U/g, and one standard particle form, an 80 mesh powder; a granulated version is offered for dust control. There is no purity percentage to choose between, because an enzyme preparation is a mixture of active protein, other fermentation proteins and carrier. The grade conversation is therefore about carrier, mesh and the units the batch actually needs. In one lineA maltase grade is an activity figure carried on a named powder, so the U/g number alone does not say what a gram will do in a blend. ## Why there is no assay percentage An enzyme powder cannot be described by a single content figure. The active protein is only part of the mass; the rest is other fermentation proteins, residual medium and the carrier used to reach the declared activity. A certificate can report protein, but protein is not activity, and neither number is a purity grade. Buyers specify the preparation by four attributes instead: units per gram, carrier, mesh and source organism. Two powders can both read “maltase, 100,000 U/g” and still behave differently. One may carry more active protein per gram and less carrier; the other may be extended with carbohydrate to the same number. Both can be legitimate products, but they are not interchangeable gram for gram. The COA page shows how each is certified. Four attributes of a maltase preparation | Attribute | What it controls | Why it matters | Activity target | Units in each gram | Charge weight and overage | Carrier | The mass around the enzyme | Label entry, moisture, flow | Mesh | Particle size | Wetting, mixing, dust | Organism | The source of the enzyme | Identity and market route ## The powder and the granule The 80 mesh powder is the standard grade. Granulation changes how the powder handles, not what the enzyme is. The granule exists to control dust, and its activity is assayed after the process; it is not inferred from the starting powder. Water and heat are part of most granulation processes, so the granule can finish below the activity of its starting powder. Catalog forms and the formula consequence | Form | Activity | Particle size | Consequence for the formula | Standard powder | ≥100,000 U/g | ≥95% through 80 mesh | Fast wetting; lightest charge; dust | Granules | Measured after granulation | Granulated | Less dust; slower wetting; process loss A lower-activity dilution is not in the catalog. A project that needs one is asking for a new specification — different carrier, different target, a new label entry and a fresh qualification — not a different pack size. That work should be scoped as development, with its own trial and its own certificate. ## 80 mesh, flow and dust At ≥95% through 80 mesh, roughly 177 µm, the powder disperses quickly in water and gives the clear to slightly turbid solution the specification describes. The same fines that speed wetting remain airborne. Because enzyme dust can sensitise the airway, the handling plan needs extraction at the source, closed transfers and a suitable mask; hazard wording sits in the SDS. Granules reduce the dust and slow the wetting. A production operator who handles kilos a day is the natural user; a stick pack that has to disperse in seconds is not. The powder is also hygroscopic: an open pouch takes up water, particles cake, and the loss-on-drying figure climbs. In practice the grade includes a sealed pack and a dry store, even though neither appears on the certificate. ## Working out the charge weight Start from the units the batch needs. A 500 kg blend dosed at 20,000 U per kilogram requires 10 million units, which is 100 g of the 100,000 U/g powder. Within one unit scale the arithmetic is exact; it says nothing about another enzyme or another unit. At production scale 100 g is an easy addition; in a 5 kg pilot the balance and the mixer both struggle with a charge that small. A granule does not solve that problem, because it carries the same units per gram as the powder it came from. The practical answers are a larger trial batch, a pre-blend made by the customer, or a custom specification developed and qualified separately. Two details belong beside the arithmetic. First, the label basis: is 100,000 U/g the release figure or the end-of-shelf-life figure? Second, the maltose in the blend. A dry blend does not let the enzyme act, but once water is added — in a wet granulation, a syrup or a drink mix — maltase will hydrolyse maltose and maltooligosaccharides, and the sugar profile can move. That may be the intended process or an unwanted change; either way, it belongs in the trial. ## Turning the choice into specification lines Ten lines: the activity and its method; identity by assay; protein or specific activity; moisture at ≤8.0%; mesh at ≥95% through 80 mesh; carrier; organism and strain; form; the labelled basis; storage. If a line cannot be measured at goods-in, it does not belong in a purchase specification. Write the activity as a minimum and place the method appendix under document control. If the maltose source, the pH or the glucose detection changes, two results carrying the same U/g label are no longer comparable. Vocabulary is defined in the specification glossary entry; the checks that keep a granulated lot honest are on the identity page. ## When granulation works against you A stick pack that must disperse in seconds gains nothing from a granule that wets slowly. A formula with no dust problem gains nothing from the extra process step, and a heat-sensitive blend gains nothing from a granulation that removes activity before the powder reaches the customer. Scale adds a third case. Dust control is a real benefit, but the granule is still an additional material to qualify, declare and store once the line is enclosed. Pick the form for the routine handling, not for the trial run. The catalog is on the maltase product page; packs and lead time on the MOQ page; activity retention on the stability page; the amylase comparison on the maltase vs amylase page. ### 02.1 Maltase vs amylase: two starch enzymes, two units URL: https://nutrition.rainwoodbio.com/products/enzymes/maltase/grades/maltase-vs-amylase/ Reviewed: 2026-11-20 Maltase and amylase both act on α-1,4 bonds in starch-derived carbohydrates, but they are different enzymes with different actions and different units. Amylase is an endo-enzyme that thins starch to dextrins and maltose; maltase is an exo-enzyme that removes glucose from the non-reducing end, including from maltose. A U/g maltase figure and an SKB/g amylase figure cannot be converted. In one lineAmylase cuts starch from the inside and maltase trims glucose from the end, so their units measure different reactions and never convert. ## Endo and exo are different jobs Alpha-amylase, EC 3.2.1.1, attacks α-1,4 bonds at random positions inside the starch chain. The substrate gets shorter quickly, the viscosity falls, and the products are dextrins, maltose and limit dextrins. Maltase, EC 3.2.1.20, works from the non-reducing end and removes one glucose unit at a time. Maltose gives two glucose molecules; longer maltooligosaccharides give glucose plus a shorter chain. Both reactions increase the number of reducing ends, which is why a generic “reducing sugar” measurement cannot tell them apart. The product profile can. An amylase-treated starch is still a mixture of dextrins; a maltase-treated maltose solution is mostly glucose. Two starch enzymes, side by side | Property | Maltase | Amylase | Enzyme class | α-Glucosidase, EC 3.2.1.20 | α-Amylase, EC 3.2.1.1 | Action | Exo; terminal non-reducing α-1,4 bonds | Endo; internal α-1,4 bonds | Preferred substrate | Maltose and maltooligosaccharides | Starch and dextrins | Main product | Glucose | Dextrins and maltose | Catalog unit | U/g on a maltose substrate | SKB/g on soluble starch | Catalog form | 80 mesh powder | 40 mesh powder ## The units measure different events An SKB/g result is a dextrinisation rate. A diluted amylase sample acts on soluble starch under the method's 30 °C and pH 4.8 conditions, and the time to an iodine colour endpoint is converted through the method's factor. The number describes how fast the starch chain is thinned, not how much glucose is produced. A maltase U/g result is a glucose-release rate. One unit releases one micromole of glucose from maltose per minute under the conditions in the method, and the glucose is measured directly or through a coupled colorimetric assay. The number describes hydrolysis of maltose, not thinning of starch. No conversion factor connects the two. A factor would need the ratio between the assays to stay constant across preparations, and it does not: the substrates, the endpoints and the calculation constants are different. A supplier's “equivalent” figure is a typical value for one product, not a property of either enzyme. What does convert is the total unit count inside one scale: 1 kg at 100,000 U/g holds 100 million U, and 5 kg at 20,000 U/g holds the same. That total is exact and helps with ordering; it carries no information about the other unit. ## What each enzyme sees in a blend Amylase needs starch. Maltase needs maltose or a maltooligosaccharide. In a dry blend neither enzyme acts, because there is not enough free water for the reaction to run. Add water and the substrate decides which enzyme does useful work. In a starch process the order is usually amylase first: it thins the starch and produces maltose and dextrins, which then become substrate for an exo-enzyme. The hold time, the pH and the temperature decide how far that second step goes. Maltase added before the starch has been thinned has little to work on; maltase held too long after the target sugar profile is reached keeps making glucose. The carrier matters too. A maltodextrin with a higher dextrose equivalent contains more glucose and maltose, so a blend built on it presents more substrate to maltase if water appears. That can change the sugar profile of the finished product and the numbers on the label. ## Using them together The two enzymes can sit in one blend, but they have to be dosed on their own units and their own method references. “100,000 units of starch enzyme” is not a specification, because the two assays would return different numbers for the same powder and neither would be checkable at goods-in. A starch-to-glucose process may use several enzymes, and maltase is one exo step rather than a replacement for the whole line. The amylase prepares the substrate; the maltase trims it; a different exo-enzyme may be needed for the rest. Each has its own working pH and temperature window, so the process is designed around the step each enzyme performs, not around a single compromise condition. In a dry blend for a stick pack or a drink mix, the enzymes are stable together as long as the powder stays dry. Once the consumer adds water, both begin to act if their substrates are present, and the sugar profile moves during the drink's shelf life. If that is not intended, the formulator has to choose one enzyme, inactivate the other, or accept and label the change. ## Writing both into a specification Keep two separate lines. For maltase: “≥100,000 U/g by the maltose-substrate assay, with the pH, temperature and glucose detection stated in the method appendix.” For amylase: “≥100,000 SKB/g by iodine dextrinisation on soluble starch, with the starch, temperature, pH and endpoint stated.” Each line also needs its basis — as-is or dry, release or end of shelf life. The rest of the specification also differs. Maltase is an 80 mesh powder with loss on drying ≤8.0%; the amylase here is a 40 mesh powder with its own moisture limit. The organism, carrier and protein figure belong on both sheets, but the values are not shared. A specification that names one enzyme and quotes the other's mesh, unit or organism is a mixed document, and the mistake is easy to make when the two products sit side by side. State the activity as a minimum and keep each method appendix under document control. If either the maltose source or the starch source changes, the two results carrying the same unit label are no longer comparable. ## Which one the application needs If the goal is to thin starch, reduce viscosity or prepare a dextrin, choose amylase. If the goal is to convert maltose or maltooligosaccharides to glucose, choose maltase. If the process needs both, buy both, dose each on its own units, and keep the two specification lines separate. Do not substitute one for the other on a label or a purchase order. The names, the EC numbers, the units and the analytical methods all differ, and a customer who ordered maltase will not accept an amylase certificate with a converted figure. The maltase product page and the amylase product page carry the two catalog specifications; the maltase grades page covers form and carrier; the methods section covers the analytical families; and the quality page describes the release sequence. ### 03 Maltase stability: heat, moisture and the process URL: https://nutrition.rainwoodbio.com/products/enzymes/maltase/stability/ Reviewed: 2026-11-20 Maltase loses activity through heat, water and a pH outside its working band, and a dry blend is the stable case. The powder is specified at ≤8.0% loss on drying and should stay in a sealed pack; a wet process, a warm hold or a humid store moves the activity down. Shelf life belongs to the pack and the matrix, not to the certificate alone. In one lineThe sealed pack protects the U/g figure; water, heat and the pH of the mix decide how much activity survives the process and the shelf. ## The powder in its pack Water activity, not water content alone, controls how mobile the enzyme is. Below a critical level the powder is glassy and the protein is effectively held in place; as moisture rises, molecular motion returns and the routes that damage the protein reopen. A 1 kg foil pouch with a sound seal keeps the contents in that low-mobility state. A folded-over pouch in a humid room does not, and the 80 mesh fines give the air a large surface to work on. The 8.0% loss-on-drying limit is a release test, not a storage target. Oven drying and water activity are different measurements, and neither one on its own predicts behaviour in a blend. What matters in storage is the seal, the headspace and the humidity of the room. Heat accelerates the same processes. A shaded warehouse is usually fine for a sealed pack; a metal-roofed loading bay in summer is not. If a pack has been in a cold store, wait for it to reach room temperature before cutting the seal, otherwise water will condense on the powder. ## The wet step takes the largest toll Dissolved enzyme is much more vulnerable than dry powder. The protein is hydrated and flexible, and heat or a pH away from its working window pushes it toward unfolding. A warm hold in a tank, a cleaning cycle that leaves residue, or a contaminating organism can all remove activity before the product is filled. The working pH and temperature belong in the technical data sheet; they are not universal constants. A pasteuriser or hot fill is a one-way loss: the activity does not come back when the product cools. The practical response is to add the enzyme downstream of the heat step, or to dose for the loss with data. Then there is maltose. If the formulation contains maltose or a maltose-rich syrup, a dissolved maltase will keep working during the hold and after filling. In a process designed to make glucose that is intended; in a finished drink that should keep a fixed sugar profile it is a reaction that needs a limit, an inactivation step or a different formulation. ## Where the activity goes Loss routes and the practical answer to each | Route | Effect | Response | Heat | Loss is permanent once the protein unfolds | Add downstream of the heater | Moisture | The powder becomes mobile and reactive | Keep it below the moisture limit | pH | The working window closes | Check the acid and buffer load | Maltose | Hydrolysis continues after the hold | Fix a hold time or inactivate | Metals | Ions catalyse oxidation | Screen the mineral premix | Open pack | The headspace takes up water | Reseal or use a smaller pack These routes interact: a warm, wet, acidic blend with a mineral premix combines four of them. The question is never whether maltase is stable in general, but how long it stays above the declared floor in a given pack and matrix. ## Setting up the study Build the study around the pack and the process, not around a generic enzyme. Three commercial lots are the usual minimum to show normal variation. Run the sale pack at 25 °C/60% RH and 30 °C/65% RH, add 40 °C/75% RH for acceleration, and sample the process before and after any wet or thermal step. At every point, assay activity and moisture, inspect appearance and run micro; express activity against the zero-point result. Storage arms and the question each answers | Arm | Sampling | Question | 25 °C / 60% RH | 0, 3, 6, 12, 18 months | Temperate shelf life | 30 °C / 65% RH | 0, 2, 4, 8 months | Warm distribution | 40 °C / 75% RH | 0, 1, 2, 4 months | Accelerated comparison | Process step | Inlet and outlet | Loss across the hold Use the pack that will be sold. A drum and a pouch differ in headspace; a granule and a powder differ in surface. Sample across the process step so the loss is measured, not assumed. ## The matrix can outrank the warehouse A fruit-flavoured stick pack is a useful example. The acid powder lowers pH as soon as water is added; ascorbic acid with trace iron or copper can generate oxidants; a mineral premix may stabilise or inhibit the enzyme depending on the metal. A reducing sugar in a wet granulation holds water inside the granule. The formula is therefore part of the stability file. Dry blending and direct compression are the low-risk routes because they add neither water nor heat. If granules are required, choose a low-water binder, keep the dry short and cool, and assay the granule after the step. If the blend carries maltose or a maltose syrup, decide whether the enzyme should remain active in the finished product; if not, dry blending or a heat step is the cleaner answer. Packaging closes the loop: a good seal, a desiccant in humid climates and a fill weight that leaves little headspace all slow the change. A stick pack has much more surface per gram than a drum, and it is opened once, so the pack format belongs in the shelf-life claim. ## From data to a labelled date The labelled date is a calculation with a safety margin, not a single assay result. Find the last time point at which activity is still above the declared minimum, subtract an allowance for method variability and lot spread, and state the storage conditions that apply. That allowance is a decision, and the report should make it visible. Use at least three lots; a single lot can be unusually good. If the label promises 100,000 U/g at the end of shelf life, the release target has to be higher by the expected loss plus the spread. A release result at the floor leaves no room. Storage instructions belong on the pack and the certificate: dry, closed, away from heat. Terms that depend on shelf life sit on the MOQ and ordering page; release checks on the quality page; catalog figures on the maltase product page; lot tests on the COA page. ### 04 Maltase: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/enzymes/maltase/moq/ Reviewed: 2026-11-20 The order unit is a 1 kg foil pouch; production quantities ship in 25 kg fiber drums. Standard 80 mesh powder is quoted at 1–7 days, while a granulated form needs to be scheduled. A useful quotation starts from the activity unit and the destination, because both change what can be offered. In one lineOne kilogram is the order unit because that is the smallest sealed pack that can carry a lot code, a sample and a traceable activity result. ## Why the minimum is one kilogram The pack sets the minimum. A pouch must hold a moisture barrier, survive handling and carry a legible code; those requirements are practical at 1 kg and awkward at 100 g. One kilogram is also 100 million units at 100,000 U/g, enough for many batches at a 100 g charge. Larger orders are built from drums: 30 kg is one drum and five pouches. Orders of 5 kg or 10 kg are normally filled from pouches; the packing list should state the split. Splitting below 1 kg breaks the original pack identity and complicates traceability, while the chemistry stays the same. ## Packs and what they protect Standard maltase packs | Pack | Net weight | Typical use | Notes | Foil pouch | 1 kg | Trial, sample, small batch | Heat-sealed; one lot code | Fiber drum | 25 kg | Production | Lined; open under extraction | Granulated powder | On request | Dust control | Activity re-assayed after the step The pouch and the drum liner are the moisture barrier; the drum itself is handling protection. An 80 mesh powder exposes a lot of surface, so an open liner lets the room's humidity in and the release figure stops describing the contents. A drum is not a dispensing container: weigh out what the batch needs, then close the liner and write the opening date on the label. Keep the pack dry, closed and away from heat; moisture is the main route to an activity loss, as the stability page sets out. ## Lead time and dispatch Standard powder is offered at 1–7 days from confirmation, depending on stock that day. The clock covers picking, paperwork and dispatch, not transit, customs or the buyer's quality release. Granulation is made to order: the schedule starts once the specification is fixed, not when the PO lands, and a trial batch normally comes before the commercial one. Ask for a dispatch date. A pre-shipment sample can be approved before the balance leaves; if that step is required, say so at quotation, because it adds to the schedule. Pouches go as parcels and drums as pallets; the Incoterm assigns freight booking and customs clearance. The lot documents should accompany the goods, and the codes on the documents, the drum and the pouch should agree. ## Quotation inputs Information to include with an enquiry | Input | Effect on the offer | Activity, unit, method | The assay definition decides what is being bought | Quantity, pack | Pouches, drums or a split | Form | Powder or granule | Organism | Needed for identity and market review | Documents, market | File, label language, import route | Delivery, shelf life | Incoterm and months on arrival “Maltase 100,000” with no unit is the usual reason an offer has to be rebuilt, because the unit and the method are the specification on an enzyme. Say whether the figure applies at release or at end of shelf life; the release target differs between the two. ## A sample has to come from the shipping lot Ask for a pouch drawn from the lot that will actually ship, with the same code on the bag and the certificate. Run the activity assay first; moisture, solubility and behaviour in the blend come next. A sample that only repeats the supplier's numbers has not been qualified. Choose the sample size for the process trial, not only for the bench. A few grams will not reveal what granulation or tableting does to the activity, so plan the quantity around the run you will make. Retain a sealed portion while the claim is live; the retained-sample note explains why. ## Clauses to settle before the first order Agree six points before production. First, the minimum per shipment, since a 1 kg pouch and a 25 kg drum do not align. Second, the shelf life remaining at delivery, expressed in months from the release date, with a lot COA. Third, the retest date and the route after it. Fourth, change control: a different organism, carrier, method or form is a different material. Fifth, the document pack for each lot, including allergen and GMO statements. Sixth, delivery terms, packing-list format and label language. If a lot is disputed, the retained sample and a joint re-test by the named method are the evidence; a photograph of the drum is not. Name the referee laboratory in the quote and quality agreement, say who pays, and agree how it is chosen. A return based only on appearance is difficult to defend for either party. Keep the specification revision on the quotation: a certificate written against an older revision is not evidence for the current order. The catalog is on the maltase product page; release tests are on the COA page; market routes are on the compliance page; the term is defined in the MOQ glossary entry; freight and documents are covered on the logistics page. ### 05 The regulatory file for maltase URL: https://nutrition.rainwoodbio.com/products/enzymes/maltase/compliance/ Reviewed: 2026-11-20 Maltase is a food enzyme preparation, so the file is judged on the production organism, the carrier and the use — not on the word “maltase” alone. In the EU, Regulation (EC) No 1332/2008 provides the framework, but the Union list is not in force as of this review, so national rules fill the gap. In the United States the route is a GRAS position, a processing-aid rationale or a dietary-ingredient basis; Great Britain runs the assimilated regime. In one lineThe legal unit is not “maltase” in the abstract but this preparation, from this organism, on this carrier, for this use. ## What counts as a food enzyme European food law does not authorise an enzyme name. It deals with a preparation: the active enzyme plus the carrier, diluent or stabiliser that make it saleable, made by a named organism and intended for a named function. Regulation (EC) No 1332/2008 calls this a food enzyme. Change the organism, the carrier or the intended use and the preparation in the file has changed. The specification should name the production organism and strain; that is the identifier a reviewer follows. Activity is one line in the dossier, not the dossier. A file that answers only the U/g question has not described the material that will be placed on the market. ## European Union: a list still in progress Authorisation sits in Regulation (EC) No 1332/2008, procedure in Regulation (EC) No 1331/2008, and implementing detail in Commission Regulation (EU) No 234/2011. The Union list is still being compiled; as of this review it has not been adopted, so the transitional national rules apply. When the list is adopted, only the listed enzyme and use combinations will be permitted. “Maltase is allowed in the EU” is not a fileable statement. The question to answer is narrower: which entry covers this preparation, organism, food and level? The current text answers it, not a supplier summary. Labelling follows the same regulation: name, food-use statement, activity with its unit, lot and storage conditions. Directive 2002/46/EC covers vitamins and minerals, not enzymes, so a supplement label does not by itself authorise the ingredient. The route rests on the food-enzyme or food-ingredient rules. Great Britain applies its own assimilated regime, and Northern Ireland follows the EU rules; the delivery address decides which file applies. The EU market note follows the instruments named above. ## United States: three possible bases The US does not run a premarket approval list for enzymes used in food. A supplier can rely on a GRAS conclusion, on processing-aid status where the enzyme has no technical effect in the finished food, or on a dietary-ingredient basis for a supplement. For a supplement, the DSHEA basis can be pre-1994 marketing, a new dietary ingredient notification or a GRAS position. The basis decides the label. Where the enzyme has a technical effect in the finished food, 21 CFR 101.4 requires it in the ingredient list by common name. If its effect is negligible and it serves only as a processing aid, 21 CFR 101.100(a)(3) removes it from that list. The buyer needs the supplier's basis on file; the hazard analysis under 21 CFR 117 is built on it. Two more points need paperwork: the GMO status of the production organism, and whether lead triggers a California Proposition 65 warning. The US market note follows the instrument. ## Raw-material limits and finished-food exposure The powder is released against Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg, APC ≤1,000 cfu/g, yeast and mould ≤100 cfu/g, and absence of E. coli and Salmonella. Those figures apply to the powder. The law limits the food as sold, and the bridge is the inclusion rate: at 0.1%, lead at 3 mg/kg adds 3 µg/kg to the finished product. Catalog figures and the legal anchor behind each | Item | Our limit | Where it comes from | Lead | ≤3 mg/kg | 3.0 mg/kg (EU 2023/915, supplement category) | Cadmium | ≤1 mg/kg | 1.0 mg/kg (EU 2023/915, supplement category) | Mercury | ≤0.1 mg/kg | 0.10 mg/kg (EU 2023/915, supplement category) | Arsenic | ≤2 mg/kg | No harmonised EU limit for supplements; buyer sets one | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Buyer specification; no statutory maximum The APC ceiling is set by the buyer, not by statute. It matters because an enzyme powder is a nutrient source as well as a processing aid, and a high count at goods-in can grow if the pack takes up water. Intake is concentration times consumption, so a raw material inside the limit can still deliver too much metal when the inclusion rate is high. ## The boundary on the label Activity is a process parameter, not a nutrient amount. No reference intake or daily value exists for an enzyme activity. A label or a page may state the enzyme name and its declared activity, and may explain the technological job it does in manufacture. It may not convert that activity into a benefit to the person consuming it. That boundary matters for maltase because digestive-enzyme language is common in the supplement market and easy to borrow. This site makes no digestive, health, structure-function or disease-related claim for the enzyme. The editorial policy records the position, and the label review belongs to the buyer's regulatory team. ## The seven documents in the file The file a food enzyme buyer should hold | Document | Issuer | What it establishes | Batch certificate | Manufacturer | The lot, its activity result, method and contaminants | Specification sheet | Manufacturer | The agreed limits, unit definition and assay reference | Safety data sheet | Manufacturer | Hazard wording, dust controls, transport class | Organism and strain statement | Manufacturer | Species and strain, with the culture collection | GMO statement | Manufacturer | The modified or unmodified status of the strain | Allergen and carrier statement | Manufacturer | The carrier and any fermentation residues | Authorisation or basis statement | Supplier or regulator | The entry, notice, rationale or GB route relied on The certificate and the specification are described on the COA page; the identity checks behind the organism and activity statements are on the identity page; the quality page describes the release file behind both. ## Six questions for the file - Which organism and strain produced the lot, by designation? - Which route or basis applies, with a reference to the current text? - Which carrier, and which allergen or GMO statement covers it? - Which activity unit, defined by substrate and conditions? - Which contaminant limits, measured by which method? - What wording will appear on the label, in the language of the market? Six clear answers make a file reviewable; missing answers turn into correspondence. The maltase product page holds the catalog figures. Pack and document flow are on the MOQ page. Market notes sit under EU and US. ### 06 How we prove a maltase lot has the declared activity URL: https://nutrition.rainwoodbio.com/products/enzymes/maltase/identity/ Reviewed: 2026-11-20 A maltase lot is identified by what it does, not by a spectrum: the preparation, the maltose assay, the protein figure and the lot trail have to agree. Activity alone can be produced by a dilution, a different glycosidase or a glucose-spiked powder. The assay conditions and the blank are part of the identity. In one lineIdentity for maltase is a functional claim: the maltose assay, the protein behind it and the lot trail have to agree on the same powder. ## What has to line up Four separate questions sit behind one certificate. Does the document name the preparation — organism, CAS number, carrier and form? Does the assay show the declared rate on maltose? Is that rate carried by protein rather than by sugar already in the powder? Does the lot code on the pack match the code on the certificate and the retained sample? Every question needs its own evidence; an answer to the first alone describes documents, not material. Four identity questions and the evidence for each | Question | What it rules out | Evidence | Is the preparation named? | A different material under the same label | Organism, CAS, carrier, form | Does it act on maltose? | A figure from another method | U/g result, substrate, pH, temperature | Is the rate protein-borne? | Dilution or a glucose spike | Protein, specific activity, blank | Is this the right lot? | A genuine certificate for another drum | One code on COA, pack and sample ## Read three ratios together The first is measured activity against declared activity. A lot declared at 100,000 U/g with a 104,000 U/g result sits at 104% of label. That tells the buyer how much margin the lot has over the floor; it does not tell them the enzyme is the right one. The second is activity per milligram of protein. Specific activity is a property of the preparation, so it falls when a powder is extended with carrier and rises when the active protein is concentrated. A normal U/g with an unusually low protein figure points to a purified or a spiked material. A normal U/g with an unusually high protein figure means the specific activity is low, which can point to dilution with a protein carrier or to partial inactivation. The third is the blank against the test signal. The assay measures glucose released from maltose, and glucose already present in the powder or carrier adds to that reading. If the blank is a large share of the response, the U/g figure is partly a sugar measurement. Ask for the blank value and the standard curve, not only the final activity. A fourth comparison is as-sold against dry basis. At 8.0% loss on drying, the dry-basis figure is about 8.7% above the as-sold figure. Comparing an as-sold result with a dry-basis limit can wrongly reject a compliant lot. ## XRD sees the carrier, not the enzyme X-ray diffraction cannot identify a maltase preparation. The active protein sits on a carrier, and the solid is amorphous; its diffractogram is a broad halo rather than a set of sharp peaks. Sharp peaks point to the carrier or to a mineral filler; a clean diffractogram is silent on enzyme content. Its only useful job here is to detect a crystalline mineral phase above the detection limit. That is worth knowing when a mineral carrier is suspected, but it is not an identity test for the enzyme. Functional evidence comes from three places: the maltose assay, the protein figure and the organism statement. A heat-hold check adds a fourth by showing that the activity behaves like the expected protein. ## Six failure modes and their signals Failure signatures and the check that exposes each | Failure | How it shows | Test | Carrier dilution | A low activity and a low protein figure per gram | Activity and protein read together | Glucose or syrup added | A high activity result with a large blank | Blank, sugar screen, specific activity | Glucoamylase blend | Maltose is split, but the heat profile differs | Protein pattern, heat hold, pH profile | Heat-inactivated lot | Normal powder, weak activity for its protein load | Activity against protein | Carrier substitution | The sheet is unchanged while the powder is not | Carrier identity, change notice | Lot mix-up | The codes disagree across the documents | One code on pack, COA and sample Maltose is not a private substrate. Glucoamylase and some other glycosidases also hydrolyse it, so a maltose-based assay is evidence of maltose hydrolysis, not of one enzyme's presence. A coupled glucose assay does not distinguish which enzyme released the glucose either. For substitution, a heat hold and a pH profile are fast discriminators, because the wrong enzyme usually has a different working window. ## Specification lines that can be tested Nine lines: the activity and its method; identity by assay; protein or specific activity; moisture at ≤8.0%; mesh at ≥95% through 80 mesh; carrier; organism and strain; the labelled basis; storage. Write the activity as a minimum and place the method appendix under document control. Choose the routine identity check for each new lot: the organism statement, a protein comparison with a reference, or both. That decision keeps identity proactive. The grades page shows how carrier and form change those lines, and the specification glossary entry covers the vocabulary. ## Five questions for the supplier - What organism and strain stand behind the lot, and what CAS number does the certificate carry? - What does the U/g mean in your assay: maltose concentration, pH, temperature and glucose detection? - What activity and protein results did this lot produce, and what is the ratio between them? - What is the glucose blank, and how was it subtracted? - Which document ties the pack to its lot, and would you agree to a joint re-test of the retained sample? Five written answers give a buyer an audit trail. An answer to the second alone gives a number: easy to issue, hard to check. Catalog figures sit on the maltase product page; lot tests on the COA page; method families under methods; the release workflow on the quality page. ### 01 What the COA for mixed tocopherols has to report URL: https://nutrition.rainwoodbio.com/products/vitamins/mixed-tocopherols/coa/ Reviewed: 2026-11-20 The lot certificate for mixed tocopherols lists seven things a buyer can check: the appearance, the HPLC identification, the total tocopherols, the four individual homologues, the peroxide value, the metals and the microbiology. A useful certificate pairs each figure with its method and with the limit the lot had to meet. The values below are catalog limits; the certificate is the only document that speaks for a specific bottle. In one lineThe certificate has to report the total tocopherols and the alpha, gamma and delta figures separately, because the total alone does not describe the mixture. ## Reading the certificate as measurements Read a certificate as a set of measurements, not as a badge. For every parameter, the reader needs to know what the laboratory measured, how it measured it, and what boundary the lot was released against. “Conforms” is a verdict; the chromatogram and the numbers are the evidence. The identity test and the profile test are not the same. Retention time and ultraviolet spectrum answer “is this a tocopherol?”; the four quantified peaks answer “which tocopherols, and in what ratio?”. A total with no breakdown describes a category. Release lines for a mixed tocopherols lot | Parameter | Test | Limit | Identification | HPLC retention and UV spectrum | Matches the reference | Appearance | Visual | Yellow to amber oil | Total tocopherols | HPLC with UV detection | ≥90.0% | Alpha-tocopherol | HPLC | 10.0–20.0% | Beta-tocopherol | HPLC | Not set in the catalog; report the value | Gamma-tocopherol | HPLC | 50.0–70.0% | Delta-tocopherol | HPLC | 10.0–20.0% | Peroxide value | Iodometric titration | ≤10.0 meq O₂/kg | Heavy metals and microbiology | ICP-MS; plate count and absence tests | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg; APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent ## The total is a sum; the profile is the breakdown HPLC separates the homologues and quantifies each one; the total is what remains when the peaks are added. The catalog sets alpha at 10.0–20.0%, gamma at 50.0–70.0% and delta at 10.0–20.0%, with at least 90.0% total. Add the three windows and the possible sum runs from 70% to 110%, which is why the total cannot be reconstructed from the published ranges alone: beta and the minor part of the concentrate fill the gap. Two lots can share a 91% total and still be different oils. One might run 10% alpha, 55% gamma and 15% delta; another 20% alpha, 50% gamma and 20% delta. Both pass the catalog. The first has half the alpha of the second, and alpha is the fraction the vitamin E arithmetic starts from. That is the practical reason the certificate reports each homologue. No drying step applies: the oil is weighed as it is, and the assay is as-is. An anhydrous figure would describe a different material. The peroxide value, in milliequivalents of oxygen per kilogram, reports the oil's oxidation condition rather than its composition, and it is usually the first line to move in storage. Beta deserves its own line. The catalog leaves it unset; the EU vitamin E entry for mixed tocopherols, as of this review, caps beta at 10% while also requiring alpha below 20%, gamma 50–70% and delta 10–30%. Three passing figures do not prove the fourth, so a certificate without beta cannot close the EU check. ## The limit and the measured result A release limit is a boundary; a result is a measurement. Keep them apart. If the result column repeats the specification range, the certificate has told the reader where the gate is, not whether the lot passed it. Result entries for the release tests | Parameter | Limit | What the result must report | Total tocopherols | ≥90.0% | The measured sum, with the four homologue values | Alpha, gamma, delta | Per window | One measured value per homologue | Beta | Reported; EU entry below 10.0% | A measured value, not a conformity statement | Peroxide value | ≤10.0 meq O₂/kg | The measured figure and the method used | Heavy metals and microbiology | Per element; counts and absence | Each element in mg/kg; the count and the absence statement Peroxide value is worth a number, not a tick. A lot released at 9.5 meq O₂/kg has little room before the specification is breached, and the oil may cross it while the total tocopherols still look normal. Each metal also needs its own figure; a combined heavy-metals number can conceal the element that is out of line. ## Lot-to-lot variation Feedstock and processing explain most lot-to-lot movement. Mixed tocopherols are recovered from a vegetable-oil deodorizer distillate, commonly soy, sunflower or rapeseed, and the starting distillate sets the homologue pattern. The concentration step then fixes how much total tocopherol remains and where the individual figures land inside the catalog windows. The peroxide value is the most variable line. Its level reflects the age and heat history of the distillate, the headspace in the holding tank and the interval before filling. Colour tends to follow: a darker, less bright oil usually signals storage or oxidation before it signals a different identity. A gradual drift and a step change mean different things. Slow movement inside the windows is normal; a sudden shift in the alpha-to-gamma relationship, with a steady total, can point to a new feedstock or a blend. Keep the trend file and match the certificate lot code to the bottle, the carton and the retained sample. ## When an independent test is warranted Use an outside laboratory for a new source, a first import into a regulated market, a profile the supplier will not itemise, or a result you dispute. Do not order a duplicate of the whole certificate. Ask for HPLC with the chromatogram and UV spectrum, quantified alpha, beta, gamma and delta, peroxide value, p-anisidine value for secondary oxidation, the metal panel, microbiology, and a residual-solvent screen if the extraction or concentration step uses one. Where synthetic alpha is a possibility, add a chiral separation; a standard achiral HPLC method cannot distinguish d-alpha from the racemic material. For every “not detected” result, ask for the limit of quantification. Without that limit the entry describes the sensitivity of the method, not the absence of the substance. Retain the sample that was tested, and require the report to identify the lot and pack. ## Comparing two offers Compare six lines before anything else: the form and CAS number; the total plus each homologue; beta; peroxide value at release; feedstock and concentration record; and pack plus lot code. A quotation that matches on the total but not on alpha or beta is offering a different oil. The paper trail is the second layer. The manufacturer, feedstock and lot should be named, and the quoted specification should carry a revision number. The catalog limits are listed on the mixed tocopherols product page. The grade question is handled on the grades page; the analytical separation of a genuine profile from a blend is on the identity page; the HPLC method is explained in the HPLC note; the release sequence is on the quality page. ### 02 Mixed tocopherol grades: the oil, the powder and the single homologue URL: https://nutrition.rainwoodbio.com/products/vitamins/mixed-tocopherols/grades/ Reviewed: 2026-11-20 The catalog form is a mixed tocopherols oil carrying at least 90.0% total tocopherols, with alpha at 10.0–20.0%, gamma at 50.0–70.0% and delta at 10.0–20.0%; a powder on a carrier can be quoted on request. Total and profile together define the grade, because either figure alone leaves the vitamin E contribution and the antioxidant role undetermined. The single alpha concentrate is a separate product, not a stronger version of this oil. In one lineThe grade is the total and the profile together: a 90% mixed oil with 15% alpha is not a 90% alpha concentrate, and a powder adds a carrier the label must name. ## Why “mixed” is a grade question A percentage can hide a product. An oil described as 90% tocopherols might be almost all alpha, or it might be a gamma-rich mixture with only a sixth of its mass as alpha. The first is built for vitamin E potency; the second is built for the whole tocopherol pattern. Both can carry the same headline number and still be wrong for each other's application. Two choices in the plant create the grade. The distillate feedstock decides which homologues are available, and the concentration step decides how much of each survives. If the purchase order fixes only the total, the supplier still controls the profile, and with it the label arithmetic. ## The catalog grade and its neighbours Mixed tocopherol grades and the neighbouring products | Grade | Total and profile | Form | What it is for | This grade, oil | ≥90.0% total; alpha 10–20%, gamma 50–70%, delta 10–20% | Oil | Antioxidant use and mixed-profile supplements | Powder on carrier, on request | Total set by the oil load; the same profile, diluted | Powder | Tablets and dry blends | Alpha concentrate | ≥90.0% d-alpha-tocopherol | Oil | Vitamin E potency and a d-alpha label | Tocopherol-rich extract | Lower total, diluted in oil | Oil | Antioxidant use where a lower total is enough The table separates the catalog grade from the products next to it. The powder is the same oil on a carrier, not a different concentration; the alpha concentrate is a one-homologue product; the tocopherol-rich extract is a lower-total oil used for antioxidant duty. Each has its own specification and label. Because the powder carries a carrier, its tocopherol content per gram falls and the carrier must be declared. The alpha concentrate has CAS 59-02-9 and a d-alpha label. The extract is defined by its own total and carrier oil, not by this catalog. ## Viscosity, colour and the carrier Mixed tocopherols are a viscous, fat-soluble oil. They do not dissolve in water; they dissolve in edible oils, ethanol and common organic solvents. Density is roughly 0.95 g/mL, so volume and weight diverge in a fill calculation. The oil pours slowly at room temperature and may thicken in a cold store; bring it back to room temperature and mix before drawing a sample. Gentle warming is enough — prolonged heat is an oxidation risk. The colour range is yellow to amber. Oxidation darkens the oil, so a darker bottle should prompt a peroxide check before it prompts a grade complaint. Amber glass is functional: it reduces the light that accelerates oxidation, and a clear container is a poor substitute. In the powder grade the oil is spread over silica, maltodextrin, starch or another carrier. Flow and dispersibility improve, but the tocopherol load per gram drops and the carrier becomes part of the label. Carrier identity, source and loading rate all belong in the specification. ## From alpha percentage to fill weight The vitamin E figure is calculated from alpha, not from the total. With 1.49 IU per milligram of d-alpha-tocopherol, an oil at 10–20% alpha works out at roughly 149–298 IU per gram. Gamma and delta are tocopherols, but they are not the alpha molecule behind the IU conversion. The IU value is an arithmetic result from the batch assay; the certificate does not certify it as a separate measurement. Mass per dose follows the same route. To declare 15 mg alpha-tocopherol, a 15% oil needs about 100 mg, a 10% oil about 150 mg and a 20% oil about 75 mg; a 90% alpha concentrate needs about 16.7 mg. These are different fill weights, and the gap is a property of the grade. The dose form narrows the choice further. Softgels take the oil and are limited by fill volume. Tablets and two-piece capsules can take the powder, spreading the dose over more mass. A clear beverage needs an emulsion, since the neat oil will not disperse. When the tocopherol is used as an antioxidant, the dose is a percentage of the fat or oil being protected, not a milligram figure of vitamin E. ## Specification clauses for this grade - “Mixed tocopherols, alpha/beta/gamma/delta, CAS 1406-66-2, oil.” - “Total ≥90.0% by HPLC; alpha 10.0–20.0%, gamma 50.0–70.0%, delta 10.0–20.0%.” - “Beta reported; the EU vitamin E entry caps it at 10.0%.” - “HPLC retention and UV identification; chromatogram supplied with the lot.” - “Peroxide value ≤10.0 meq O₂/kg; yellow to amber oil.” - “Metals and microbiology as listed; feedstock source named.” - “If powder: carrier, source and loading rate.” - “Pack, headspace, storage condition and specification revision.” ## Where another grade fits better A d-alpha label rules this oil out, no matter how close the total appears. A small fill that must carry a large vitamin E dose rules it out too: the mixed oil needs roughly four to nine times the mass of a 90% alpha concentrate for the same alpha figure. A dry powder with a long warehouse life may be better served by the acetate, whose ester group protects the phenol. The opposite case is equally clear. If the formula needs gamma and delta beside alpha, an alpha concentrate cannot supply them, even at a higher assay. The grade table settles potency; the matrix settles form. The product hub has the catalog limits; the level-four comparison follows the label question; the COA page shows the profile reporting; the vitamin E page covers the synthetic acetate powder; the HPLC note describes the separation. ### 02.1 Mixed tocopherols vs alpha-tocopherol: the profile, the use and the label URL: https://nutrition.rainwoodbio.com/products/vitamins/mixed-tocopherols/grades/mixed-tocopherols-vs-alpha-tocopherol/ Reviewed: 2026-11-20 Mixed tocopherols and alpha-tocopherol are separate ingredients. The first is a four-homologue oil, normally gamma-dominant and carrying only 10–20% alpha; the second is a concentrate of at least 90% d-alpha-tocopherol. That difference sets the vitamin E number, the antioxidant job and the label name, and it cannot be reduced to a strength comparison. In one lineThe mixture and the alpha concentrate differ in the profile before they differ in strength, and only the alpha fraction carries the vitamin E figure the label declares. ## Two products, not two strengths CAS 1406-66-2 covers the mixed tocopherols; the product has no single formula because it is a family of homologues. The alpha concentrate is CAS 59-02-9 and C29H50O2, a single molecule. Both are fat-soluble, water-insoluble oils supplied in amber glass, which is why the packs look alike and the products are not interchangeable. Nor is one a diluted or purified version of the other. Both begin with a vegetable-oil deodorizer distillate, but the concentration step targets different fractions: the mixed grade retains gamma and delta, while the alpha grade enriches alpha and removes most of the others. An order for “tocopherols 90%” specifies neither. ## The profile is the difference Mixed tocopherols against a d-alpha-tocopherol concentrate | Homologue | Mixed tocopherols (catalog) | Alpha concentrate (catalog) | Alpha-tocopherol | 10.0–20.0% | ≥90.0% d-alpha | Beta-tocopherol | Not set; EU entry below 10.0% | Balance | Gamma-tocopherol | 50.0–70.0% | Balance | Delta-tocopherol | 10.0–20.0% | Balance | Total tocopherols | ≥90.0% | ≥90.0% as d-alpha Both columns can begin with a 90% total and still describe different products. The alpha value differs by a factor of four or more, and the mixed product is gamma-dominant while the concentrate is alpha-dominant. That is why the mixed oil suits antioxidant use and the concentrate suits vitamin E potency. ## IU, mg alpha and the label arithmetic Vitamin E arithmetic begins with alpha and uses 1.49 IU per milligram of d-alpha-tocopherol. A 15% alpha mixed oil therefore carries about 224 IU/g; at 10% it carries about 149 IU/g and at 20% about 298 IU/g. A 90% alpha concentrate carries about 1,341 IU/g. Applying 1.49 to the total tocopherols of the mixed oil would overstate its vitamin E several-fold. The same logic gives the mass per dose. Declaring 15 mg alpha-tocopherol takes about 100 mg of a 15% mixed oil, 150 mg at 10% or 75 mg at 20%; the 90% concentrate needs about 16.7 mg. The EU expresses the label value in mg alpha-tocopherol equivalent, the US in mg alpha-tocopherol, so the same oil does not produce the same number in both markets. Keep the conversion in the label file. ## The use decides the choice The mixed oil does two jobs. In a fat or oil it acts as an antioxidant at a dose expressed as a percentage of the matrix; the gamma and delta homologues are part of why it is selected, and the peroxide value of the blend shows whether it is working. In a supplement it supplies tocopherols, but the vitamin E figure is still taken from alpha. The alpha concentrate is chosen when vitamin E potency is the objective: a softgel or tablet with a defined IU or mg alpha declaration and a fill weight that cannot accommodate a larger mass of oil. The mixed oil would multiply the mass per dose, so it is not a drop-in. In the other direction, the concentrate cannot supply the gamma and delta fractions a mixed-profile formula is built around. ## Stability follows the profile and the pack Both oils oxidise, and both depend on a sealed, dark, cool pack. The mixed oil carries its own antioxidant fraction, but that fraction is spent as it protects the oil, and peroxide value rises as the reserve falls. The alpha concentrate is also consumed in the same way. Neither has a shelf life independent of its container. The matrix chooses between them. An oil blend can take either, and the blend's stability test is the evidence. An emulsion needs the tocopherol at the interface, where the mixed profile and the single molecule do not behave identically. A dry powder often does better with the acetate. The stability page describes the protocol. ## The label declaration EU Directive 2002/46/EC Annex II permits mixed tocopherols as a vitamin E form and, as of this review, attaches a composition footnote: alpha below 20%, beta below 10%, gamma 50–70%, delta 10–30%. The label value is in mg alpha-tocopherol equivalent, with the other homologues converted at their own factors. When the oil is used only as an antioxidant, it is declared as an additive — for example, antioxidant: tocopherol-rich extract — rather than as the vitamin E source. In the US, the Supplement Facts panel states vitamin E in mg alpha-tocopherol against a 15 mg Daily Value, and only alpha counts. Mixed tocopherols may be named in the ingredient list, but gamma and delta do not increase the vitamin E figure. The label must describe the form and role the file covers, not whichever form happens to be in the warehouse. ## Which product for which job Pick the mixed oil for antioxidant protection in a fat or oil, for a label that names mixed tocopherols, or for a formula that needs gamma and delta beside alpha. Pick the alpha concentrate for vitamin E potency, for a d-alpha label, or for a fill that cannot carry the larger mass of mixed oil. Pick the acetate for a dry powder that benefits from the more stable ester. Changing from one to the other requires change control, a new specification and a new label check. They share a feedstock family and a pack style, but not a profile, a vitamin E value or a label name. The product hub lists the catalog specification; the vitamin E page covers the synthetic acetate powder; the grades page places the comparison in the range; the methods index covers the HPLC assay; the quality page covers release. ### 03 Mixed tocopherols: oxidation, the amber bottle and the shelf life URL: https://nutrition.rainwoodbio.com/products/vitamins/mixed-tocopherols/stability/ Reviewed: 2026-11-20 Mixed tocopherols oxidise, and the process is pushed by oxygen, light, heat and traces of iron or copper. Because the tocopherols are themselves the antioxidant, their protection is used up as oxidation proceeds; peroxide value, colour and the state of the amber bottle show how much remains. A shelf life therefore belongs to a pack and a storage condition, not to the substance in general. In one lineThe tocopherols are consumed while they protect the oil, so the peroxide value and the colour show how much of the antioxidant reserve remains. ## The neat oil: oxygen, light and headspace The neat oil is normally supplied in an amber bottle, and the headspace is the part of the pack that does the most damage. Oxygen sitting above the oil, and oxygen already dissolved in it, reacts with the tocopherols and with the lipid fraction of the concentrate. A full, tightly closed bottle is a different storage environment from a half-used one. Keep the ullage small, close the bottle immediately after sampling and never leave an open bottle on a bench overnight. Light drives photo-oxidation. Amber glass removes part of the spectrum but does not make the oil light-proof; a windowsill is still a bad location. Heat increases both the oxidation rate and the darkening. Store the bottle cool and dark, and avoid leaving it in a warm dispatch area. Iron and copper are catalysts at low concentration. They accelerate the decomposition of lipid hydroperoxides, and the tocopherols are consumed in the reaction. Use glass or a lined container, keep metal samplers out of the oil and do not store it in an unlined steel vessel. Peroxide value usually moves before the total tocopherol figure does. The oil may darken, lose brightness or acquire an off-odour while HPLC still reports a passing total. That is why appearance and peroxide value belong beside the profile at release. ## The oil in a blend or an emulsion When the oil is blended into another fat, the tocopherol is in the phase it is protecting, and the behaviour is comparatively simple. In an emulsion it is not: the molecule partitions among oil, water, surfactant and interface, and the interface is where lipid oxidation commonly begins. A tocopherol that remains buried in the oil droplet contributes less than one positioned at the surface. Water also brings pH, dissolved oxygen, metal ions and the homogenisation step into play. Tocopherols are relatively stable under mildly acidic conditions but are consumed faster when the oil phase is aerated or lit. In some formulations, particularly with trace iron or copper, the phenol can promote oxidation rather than inhibit it; concentration, metal load and interface all matter. The only reliable answer is a test in the actual emulsion. A drink or stick pack needs an emulsion or a dispersion step before the oil can be used. Neat oil separates, and a surface ring is a formulation defect, not a storage effect. Evaluate the finished matrix at its process pH and heat load; a bulk-oil result does not carry over. ## What accelerates oxidation Storage risks for a mixed tocopherol oil | Factor | Effect | Control | Oxygen | Uses up tocopherols; the peroxide value climbs | Small ullage; tight closure; nitrogen if agreed | Light | Photo-oxidation; the colour darkens | Amber glass; dark room; opaque outer pack | Heat | Faster oxidation and darkening | Cool storage; brief gentle warming only | Trace metals | Break down hydroperoxides | Glass or lined contact; no metal sampler | Water and interface | Drives the antioxidant to the interface; pH effects | Test the emulsion; control pH and homogenisation | Processing | Heat and aeration during blending | Review the process; minimise air entrainment These factors reinforce one another. A warm, bright, part-empty bottle is worse than any one of them alone, and a metal scoop left in the oil creates a local hot spot of catalysis. The question to ask is not whether the material is stable, but how long it remains within specification in a defined pack and store. ## Designing the stability study Define the pack, the storage condition, the sampling times and the test panel before starting. A common design uses 25 °C/60% relative humidity for long-term storage, 30 °C/65% for intermediate storage and 40 °C/75% for acceleration; a separate light-exposure arm is needed because a dark chamber cannot detect photo-oxidation. At each point, measure total tocopherols and the four homologues by HPLC, peroxide value, p-anisidine value, appearance and colour. For a blend or an emulsion, run the study in the matrix and include the process heat load. An accelerated oxidation instrument such as Rancimat can rank formulations, but it does not replace storage data. Report each result, not a single pass statement, and identify the pack and the lot family. The 1 kg and 5 kg bottles differ in headspace and in how often they are opened; a result from one does not automatically describe the other. ## How the matrix changes the result A softgel has two phases to consider: the oil fill and the shell. Oxygen can enter through the shell, and the shell itself contains water and plasticiser that may migrate. Test the fill's peroxide value and appearance at release and at the end of the declared life, not only the bulk oil. An oil blend is the easiest case, because the tocopherol is already dissolved in the lipid it protects. Its dose is a percentage of the blend, and the blend's peroxide value and Rancimat result are the practical checks. A powder on carrier is less predictable: depending on the carrier and the process, it may shield the oil from oxygen or expose it over a much larger surface. Overage is a decision for the formulator. Tocopherol added to protect the oil will be partly spent by the end of shelf life; tocopherol added to support a label declaration must still meet that declaration at the end. The two calculations differ, and neither compensates for a pack with a poor oxygen barrier. ## Where the retest period comes from Shelf life for mixed tocopherols is not a fixed catalog value, because the pack and the storage condition determine it. The retest period is written into the specification and backed by stability data for that pack. Without a named pack, a stated storage condition and a defined test panel, a shelf-life figure is only an assertion. Once the retest period ends, re-test the retained sample before authorising more use. Extension is not automatic, and a bulk result does not transfer to a repacked bottle. The product hub lists the packs; the COA page covers release testing; the MOQ page covers bottles and lead time; the HPLC note explains the assay, and release and retention are set out on the quality page. ### 04 Mixed tocopherols: MOQ, amber bottles and ordering URL: https://nutrition.rainwoodbio.com/products/vitamins/mixed-tocopherols/moq/ Reviewed: 2026-11-20 Mixed tocopherols start at 1 kg, packed in a 1 kg amber bottle; the 5 kg amber bottle is the production size. Standard packs are quoted at 1–7 days, and a usable quotation identifies the total, the four-homologue profile, the bottle, the destination, the documents and the role the oil will play. In one lineOne kilogram is the smallest order because the profile is lot-specific, and a sample only qualifies the material when its own total and homologue figures travel with it. ## Why 1 kg is the floor A kilogram is the smallest released pack, not a spoonful taken from a drum. It is enough for a bench run, a retained sample and a third-party profile check, and it travels as a parcel while a production plan is still being settled. The bottle is filled and released under one lot code, so trial material and production material can be compared against the same record. Splitting below a kilogram means repacking from a larger lot. Handling increases, the original pack identity is lost and tracing the material becomes less direct, while the chemistry does not change. The 5 kg bottle reduces handling per kilogram but ties up more inventory and spends longer in storage. The minimum is set by pack integrity and traceability, not by a target order value. ## Bottles and the powder option The bottle sizes and the powder option | Pack | Fill | Where it fits | Notes | Amber bottle | 1 kg | Trial, sample, small batch | Light barrier; small ullage; reseal after use | Amber bottle | 5 kg | Production | Light barrier; lot code on bottle and carton | Powder on carrier | On request | Tablets and dry blends | Carrier declared; separate specification and lead time Amber glass is a functional part of the pack because it limits the light that accelerates oxidation. The closure and the ullage matter as much as the glass. A powder on carrier is not a packing variant of the same product: the carrier, its loading rate and the label all change, so it needs its own specification and its own lead time. ## From order to dispatch Standard packs are quoted at 1–7 days after order confirmation. The clock covers picking, documentation and dispatch, not sea or air transit, customs clearance or the customer's own release. A custom fill, a carrier powder or special labelling adds time and should appear as a separate line on the quotation. Get a dispatch date rather than accepting the range. The 1 kg and 5 kg bottles normally ship as parcels; the Incoterm decides who books freight and who clears import. Documents should accompany the bottle: a COA that arrives after the material delays the customer's release. ## Six details a quotation must carry A comparison needs six details: - Product and form. Mixed tocopherols, CAS 1406-66-2, oil, profile stated. - Profile. Total and alpha, beta, gamma and delta, with the peroxide value. - Quantity and pack. 1 kg, 5 kg or powder on carrier. - Destination and Incoterm. Country, delivery point and trade term. - Documents. COA, specification, SDS, source record and market statements. - Role and market. Antioxidant, vitamin E source or both; where the product will be sold. A total without a profile is not enough to quote against, because alpha drives the vitamin E number and gamma and delta drive much of the antioxidant use. The role is part of the brief: the same certificate is read differently for an antioxidant application and for a vitamin E declaration. ## A sample must be traceable to its lot Use the 1 kg bottle as the qualification lot. Check total, each homologue including beta, peroxide value and metals before scale-up, and retain material from the same bottle. The lot code should connect the sample, the COA, the specification and the quotation; without that link a sample is only a demonstration. A trial needing less than a kilogram is a repack. It comes out of a larger lot, carries a separate handling record and is not the catalog bottle. Ask for the split in writing, and file the split lot's code alongside the trial results. Bench material and production material can be different lots even when they meet the same specification. ## Terms to fix before ordering Put commercial and quality terms in one document: Incoterm, bottle size, dispatch window, specification revision, lot COAs, retained sample, retest period and the change-control route. Agree them before the first production order, when both sides still have room to negotiate; after a dispute the discussion is harder. If a lot falls outside the agreed profile, the evidence is the retained sample and a joint retest by the named HPLC method — not a photograph of the bottle. Name the referee laboratory and the party that pays for it in advance. A return based on colour alone is weak, because yellow to amber covers a broad range. Catalog limits sit on the product hub, release tests are set out on the COA page, the role and market file are covered on the compliance page, the MOQ glossary entry defines the term, and release and retention are described on the quality page. ### 05 The regulatory file for mixed tocopherols URL: https://nutrition.rainwoodbio.com/products/vitamins/mixed-tocopherols/compliance/ Reviewed: 2026-11-20 Mixed tocopherols, CAS 1406-66-2, are a four-homologue mixture supplied as an oil with at least 90.0% total tocopherols. The file must connect the lot's profile to the role it plays in the finished product, because the same oil can be an authorised vitamin E form, an antioxidant additive or both. The buyer's regulatory team owns the destination route; this page sets out the checks and the paperwork. In one lineMixed tocopherols can be a vitamin E source, an antioxidant additive or both, and the destination file has to match the lot's profile to the role before the label is written. ## The four checks behind the file The folder has to answer four things: whether the substance is allowed in the intended category, which role it performs, which contaminant limits govern the product in the form it is sold, and how it is declared on the label. None of those answers comes from a certificate. The certificate describes the lot; the route is a separate record that also names the specification version and the market. Role is the distinctive question here. Tocopherol used to slow oxidation in an oil is an additive. Tocopherol used as a nutrient in a supplement is a vitamin E source. One product can contain both roles, so the file should state, for each place the oil appears, which role it is playing. A vague line in the specification will not support a label, an additive entry and a vitamin declaration at the same time. ## The EU route Food supplements in the EU fall under Directive 2002/46/EC. Annex I lists the vitamins and minerals permitted in the category; Annex II lists the permitted forms of each. As of this review, Annex II(f) includes mixed tocopherols and attaches a composition footnote: alpha below 20%, beta below 10%, gamma 50–70% and delta 10–30%. The footnote needs checking against the lot, not just against the catalog. The catalog allows alpha up to 20.0%, while the entry requires it to stay below 20%; the catalog also leaves beta unspecified, while the entry caps it at 10%. A certificate that reports alpha, gamma and delta but not beta cannot demonstrate the EU composition, even if its total is comfortably above 90%. The member-state route and the current consolidated text remain the buyer's confirmation. Antioxidant use is governed separately by Regulation (EC) No 1333/2008, where the tocopherols appear as E 306 to E 309 and the food category and level decide the permitted use. Labelling sits under Regulation (EU) No 1169/2011: vitamin E is expressed per portion in mg alpha-tocopherol equivalent against the 12 mg reference intake, and an additive is named in the ingredient list with its class and its name or E number. For Great Britain the GB lists apply; Northern Ireland remains within the EU framework, so the delivery address determines the file. ## The US route In the US, the oil can be used as a dietary ingredient in a supplement or as a GRAS antioxidant in food. 21 CFR 182.3890 covers tocopherols as generally recognized as safe under good manufacturing practice, which is the antioxidant route. Supplement manufacture falls under 21 CFR 111, and the Supplement Facts panel under 21 CFR 101.36; as of this review, vitamin E is declared in mg alpha-tocopherol against a 15 mg Daily Value. The consequence is that only alpha contributes to the US vitamin E figure. Gamma and delta may be named as part of the mixed tocopherols in the ingredient list, but they cannot be added to the vitamin E number. Multiplying the total tocopherols by an IU factor produces an overstated declaration. The supplier should identify the dietary-ingredient basis it relies on, and the buyer should confirm that the basis reaches the finished product and the claim. ## Contaminant ceilings Contaminant limits apply to what is sold, so a bottle result is an input to the calculation, not the answer. The table gives the usual starting references; the current text for the destination, the daily intake and the rate at which the oil is included set the final figure. Contaminant references for a finished supplement | Parameter | Usual reference | Evidence to keep | Lead (Pb) | 3.0 mg/kg in the EU supplement | Lot value, method, limit and the finished-dose calculation | Cadmium (Cd) | 1.0 mg/kg in the EU supplement | Lot value and any category exception | Mercury (Hg) | 0.10 mg/kg in the EU supplement | Lot value and method | Arsenic (As) | Buyer or market limit | The agreed figure and method | Peroxide value | Not a legal limit; ≤10.0 meq O₂/kg in the specification | The measured value and the lot trend Peroxide value is a quality parameter, not a statutory ceiling. It is nevertheless the number that predicts an off-odour in a softgel or blend long before a contaminant limit is relevant. No regulation protects a brand from oxidised oil; the specification and the stability file do that. ## Label language and claims EU health claims for vitamin E appear in the claims register with their own conditions, including the amount the product must contain. They are not repeated here and none is endorsed. The brand's reviewer checks the register, the dose and the form before wording is finalised; a claim built around alpha-tocopherol does not simply carry over to a mixed oil, because the vitamin E calculation differs. In the US, a structure/function statement requires substantiation and the DSHEA disclaimer, and disease claims are not available. “Mixed tocopherols” names an ingredient; it is not a vitamin E claim. “Antioxidant” describes a technological function in the food, not a physiological benefit. This site publishes specifications and makes no health claim. ## The document pack The file should contain the lot COA with total, alpha, beta, gamma and delta, peroxide value, metals and microbiology; a specification naming the form, CAS number, profile, beta limit and pack; a 16-section SDS; and the feedstock record, normally a vegetable-oil deodorizer distillate. It also needs allergen, GMO, origin and residual-solvent statements, the route statement for additive or vitamin E use, label artwork showing the vitamin E calculation, and the retest period tied to its pack and condition. The allergen position follows the feedstock. Whether a soy, sunflower or rapeseed source requires a pack statement is a decision for the brand and the destination rules; this page does not declare the oil free of any allergen. Catalog limits are on the product page; the COA page sets out the release lines; the identity page covers the analytical evidence. ## Checks before ordering - Specification version, form and CAS 1406-66-2 are recorded. - Total and all four homologues are reported; beta is below 10% for the EU route. - COA, TDS, SDS, source record, allergen and GMO declarations and the residual-solvent statement are on file. - Contaminant results have been converted to the finished-product dose. - The role is stated, and the label matches the role. - Pack, storage condition and retest period are agreed in writing. The quality page describes the release file, the EU regulatory notes collect the framework references, and the US notes cover the supplement route. ### 06 How to prove a mixed tocopherol lot by its profile URL: https://nutrition.rainwoodbio.com/products/vitamins/mixed-tocopherols/identity/ Reviewed: 2026-11-20 Identity for mixed tocopherols is established by the document and the chromatogram together: the name and CAS 1406-66-2, HPLC retention and UV spectrum, the four quantified homologues, and a mass balance that includes peroxide value. A total percentage by itself cannot distinguish a genuine mixed profile from a diluted oil, a gamma-rich substitute or an alpha-spiked blend. In one lineA mixed tocopherol lot is identified by its four-homologue HPLC profile, not by the total: the total says how much tocopherol is present, the profile says which ones and in what proportion. ## The four checks, and what each proves Each line answers a different question. An answer to the first alone proves only that the paperwork is consistent; the profile is the line that separates one mixed tocopherol product from another. The identity checks for a mixed tocopherol lot | Check | What it asks | Evidence | What it shows | Document | Is the material named? | Name, CAS 1406-66-2, feedstock record | Paperwork only | Chromatography | Is it a tocopherol? | HPLC retention and UV spectrum | The molecular family | Profile | Which homologues, and how much? | Quantified alpha, beta, gamma and delta | The mixture itself | Balance | Diluted, oxidised or spiked? | Total, peroxide value, colour, carrier | Whether the numbers agree ## The homologue ratio is the identity The homologues are built on the same chromanol ring and phytyl tail; they differ in methylation. Alpha carries three methyl groups, beta and gamma two, delta one. The catalog places alpha at 10.0–20.0%, gamma at 50.0–70.0% and delta at 10.0–20.0%, with at least 90.0% total. Beta is not specified; the EU vitamin E entry, as of this review, requires it below 10%. The published windows do not fix a ratio. Gamma divided by alpha can range from 2.5 to 7 within the catalog, and delta divided by alpha from 0.5 to 2. A figure outside those ranges is a reason to ask for the individual results, not an automatic rejection; natural variation can sit anywhere inside the windows. Near the edges, the individual figures matter more than the ratio. Alpha also has a boundary the catalog does not express. The catalog permits 20.0%, while the EU footnote requires less than 20%. A lot at the top of the window therefore needs its measured value to decide the EU position. And two lots with the same 92% total can differ twofold in alpha, which changes the vitamin E arithmetic even though the headline agrees. ## X-ray diffraction: a solid-state tool An oil is amorphous, so X-ray diffraction has little to say about the neat product; there is no sharp pattern to compare. The technique measures neither homologue composition nor oxidation, and it cannot tell alpha from gamma. For the powder on carrier, diffraction becomes useful. It can identify a crystalline carrier, detect the substitution of an amorphous carrier such as maltodextrin, and show whether a crystalline diluent has been added. In a disputed powder lot, combine XRD with the HPLC profile and peroxide value, and ask for the reference pattern rather than a statement that the result “matches”. ## Substitution patterns and their signals Substitution routes for mixed tocopherols | Route | What changes | Signal | Test | Carrier oil dilution | Lowers total and alpha per gram | Total below 90%; paler oil; its own peroxide value | Total, profile, balance | Gamma-rich cut | More gamma, less alpha | Gamma above 70%; alpha below 10% | HPLC profile | Alpha spiking | Raises alpha and the vitamin E figure | Alpha above 20%; a pattern unlike the source | Profile plus feedstock record | Synthetic dl-alpha | Alpha without the natural configuration | Rotation or chiral ratio inconsistent with the profile | Chiral separation, polarimetry | Tocopheryl acetate | An ester, not a tocopherol | Ester carbonyl; the result changes on hydrolysis | FTIR, HPLC after hydrolysis | Oxidised oil | Total falls, peroxide value rises | Peroxide value high; dark colour | Peroxide value, p-anisidine, appearance Colour is the least specific indicator: yellow to amber spans a wide range, and a fresh concentrate may be darker than a diluted one. The profile, peroxide value and mass balance are stronger evidence. A certificate that shows total and appearance but omits the individual homologues leaves the most probable substitution untested. ## What the specification should say about identity - “Mixed tocopherols, alpha/beta/gamma/delta, CAS 1406-66-2, oil; feedstock named.” - “Total ≥90.0% by HPLC; alpha 10.0–20.0%, gamma 50.0–70.0%, delta 10.0–20.0%.” - “Beta reported; the EU vitamin E entry caps it at 10.0%.” - “HPLC retention and UV identification; chromatogram and spectrum with each lot.” - “Peroxide value ≤10.0 meq O₂/kg; yellow to amber oil.” - “No carrier oil or other tocopherol source above the agreed limit.” - “Pack, storage condition and retest period stated.” ## Five answers to request in writing - Which homologues are present, and what are the alpha, beta, gamma and delta values? - Can you supply the chromatogram and UV spectrum, not just the total? - What is the beta value, and does the lot meet the EU composition footnote? - What is the feedstock, and what was the peroxide value at release? - If the profile is challenged, will you retest the retained sample with our laboratory? Written answers to those five make an identity file; a total percentage does not. Catalog limits are listed on the product hub, and the COA page maps each value to its certificate line. The grades page compares oil, powder and alpha concentrate; the level-four page follows the label consequences; the HPLC note explains the separation; the quality page covers release. ### 01 What the COA for vitamin K2 MK-4 oil actually contains URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k2-mk4-oil/coa/ Reviewed: 2026-11-20 The certificate for a vitamin K2 MK-4 1% oil lot reports appearance, an HPLC identity check against a menaquinone-4 reference, the assay as a concentration in the carrier oil, the peroxide value that describes the oil's condition, and the heavy-metal and microbiological panels. The catalog range is 1.0–1.1% menaquinone-4 with peroxide value at or below 10.0 meq O₂/kg. Those are the acceptance limits; a batch COA records what one bottle actually measured, and the concentration line only means something when the carrier is named beside it. In one lineA 1% oil certificate is a concentration report and an oxidation report: the HPLC figure says how much menaquinone-4 the oil carries, and the peroxide value says how well the oil has been kept. ## Reading the sheet line by line A usable line has a defined subject, a named method and the acceptance limit it was judged against. A row that records only “conforms” records a decision without the basis for it, and in a diluted oil the missing part is usually the method. The identity line ties the peak to menaquinone-4 and the assay counts it; neither describes the carrier, so the carrier statement belongs in the same folder. Certificate lines for a vitamin K2 MK-4 1% oil | Measurement | Procedure | Limit | Appearance | Visual | Yellow to amber, clear oil | Identification | HPLC retention and UV spectrum | Conforms to the menaquinone-4 reference | Assay | HPLC with UV detection | 1.0–1.1% menaquinone-4 | Peroxide value | Iodometric titration | ≤10.0 meq O₂/kg | Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent There is no loss-on-drying line here because the material is an oil, not a powder. If the carrier holds water, a moisture limit by Karl Fischer can be agreed as an additional line. ## What 1.0–1.1% means on an oil One percent is a concentration, not a purity. A gram of oil at 1.0–1.1% carries 10–11 mg of menaquinone-4, and the remaining 989–990 mg is carrier plus the minor components of that carrier. The result is reported on the oil as sold. There is no anhydrous basis to convert, because the oil is not a damp solid with a dry matter to divide by. What the certificate must state instead is the concentration unit and the carrier: “menaquinone-4, 1.05% w/w in a declared oil” is a complete line. The dose follows from the concentration. A 45 µg label claim takes 4.1–4.5 mg of oil at this range; a 5 mg claim takes 455–500 mg; a 10 mg claim takes 0.91–1.0 g. The carrier mass moves with the dose, and that mass is what the softgel has to hold. Do not compare this figure with the 98.0–102.0% on the isolated MK-4 powder. One number is a blend strength and the other is a purity; a supplier who quotes “98% MK-4 oil” is describing a different material or a different arithmetic. ## The limit and the measured result A release limit defines where acceptance stops; a batch result is a single measurement from one lot. They belong in separate columns, with the method named and, for peroxide value, the test date shown. What belongs in the result column | Test | Acceptance limit | What a result looks like | Assay | 1.0–1.1% menaquinone-4 | A measured percentage, with the carrier and the method | Peroxide value | ≤10.0 meq O₂/kg | A measured figure with the test date | Heavy metals | Per element | A mg/kg figure for every element | Microbiology | Counts and absence | A count plus the absence wording for the lot Peroxide value behaves unlike the rest. It is a snapshot of an oil that keeps reacting with oxygen, so a lot released at 6.0 meq O₂/kg can be above 10.0 after a warm transit or a year on a shelf. The certificate is evidence at the time of test, not a promise for the storage period. Ask for the test date, and ask again at receipt if the pack has travelled far. A pass statement is only as strong as the figures behind it; the reader should be able to check the concentration, the oxidation figure and the counts and reach the same verdict. ## Variation between lots Blending accuracy moves the assay inside a window only 0.1 percentage points wide, about ±5% around the midpoint. The laboratory has to measure it against a standard, not against the previous certificate. Oxidation moves the peroxide value between the blend and the bottle. Light, heat and headspace air all raise it, so two lots of the same blend can leave the plant at different values after different filling runs. What matters is the direction over several lots, not one figure at the edge. The carrier lot changes the colour, the cloud point and the fatty-acid profile. Soybean oil and a medium-chain triglyceride do not look or freeze alike, and a bottle that clouds in a cold store has not necessarily failed; warm it, mix it, take the sample again and record that it was warmed, because the sample's history belongs with its result. A darker colour, a cloudier oil or a new peak in the chromatogram each points at a different cause. The lot code printed on the sheet has to be the one on the bottle, the carton and the sample kept back. ## When an outside laboratory helps An outside laboratory is worth the cost for a new source, a first regulated-market shipment, a concentration in dispute or a complaint about oxidation. The panel worth buying is not a duplicate of the release sheet: HPLC with a UV spectrum against a menaquinone-4 standard, peroxide value and p-anisidine value, free fatty acid, a fatty-acid profile of the carrier by GC, ICP-MS for the metal panel and the microbiology suite. Add a menadione screen when the route is synthetic and the starting material is the question. Ask the laboratory for its detection limit on each screen: a “not detected” entry without a stated limit tells you about the assay's reach, not about the oil. Send the retained sample itself, and ask for the report to identify the lot and the pack. ## Comparing two offers Six things belong side by side: the concentration and its unit; the identity method and the spectrum; the carrier and its source; the peroxide value with a date, plus an anisidine value if oxidation is the question; the menadione and related-substance position; the pack and the lot traceability. When two offers match on 1.05% but not on the carrier or the peroxide value, they describe different oils, not two versions of one oil. The product page lists the catalog limits for the MK-4 oil. The grade page compares the oil with the powder, the identity page sets out the tests behind the concentration, the HPLC method note in the methods library describes the separation, and the quality page covers release. ### 02 MK-4 oil, crystalline powder or dilution: choosing a grade URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k2-mk4-oil/grades/ Reviewed: 2026-11-20 Vitamin K2 MK-4 is supplied as a 1% oil in a carrier, as a 98.0–102.0% crystalline powder, and on request as a powder diluted on a carrier. The catalog oil is 1.0–1.1% menaquinone-4 by HPLC; the powder is the isolated substance. The grade decides the mass that carries the label dose, the ingredient list and the stability file, so it is chosen before the purchase order. In one lineThe grade is chosen from the dose: a microgram claim needs the 1% oil to be weighable, and a 45 mg claim needs the 98% powder to fit a capsule. ## Why the same molecule comes as an oil and a powder Menaquinone-4 is a low-melting solid, reported around 35–38 °C. The isolated material softens in a warm room, and at a small weight it is hard to disperse evenly through a blend. Dissolving it in a food-grade oil at 1% gives a liquid that can be pumped, weighed and filled without melting or milling, and that mixes evenly into a softgel fill. The powder exists for the opposite reason: at a milligram dose, a concentrated solid keeps the fill small enough for a capsule or a tablet, and the carrier does not take up room in the formula. An order that says only “MK-4” leaves the form open, so the concentration and the carrier have to be written into it. ## The oil, the powder and a powder on carrier Three MK-4 grades and where each fits | Property | 1% oil | Crystalline powder | Powder on carrier | MK-4 content | 1.0–1.1% (10–11 mg/g) | 98.0–102.0% | Agreed and declared | Carrier | A declared food-grade oil | None | A declared solid carrier | Appearance | Yellow to amber, clear oil | Yellow crystalline powder | Powder; colour follows the carrier | Dose fit | Micrograms to about 10 mg | About 1 mg and above | Micrograms to about 1 mg | Usual dosage form | Softgel, drops, oily blend | Capsule, tablet, oil blend | Dry blend, stick, capsule | Label addition | The carrier oil is named | No carrier to name | The carrier is named The mass does not transfer between them. Rebuilding a 98% powder formula around the 1% oil makes the fill about a hundredfold heavier, which changes the capsule, the label and the stability file together. The powder on carrier is a third product with its own carrier and blend-uniformity test, not a packing option on the powder. ## What each grade is like to handle The oil is a clear yellow to amber liquid, insoluble in water and miscible with fats and oils. It is light-sensitive, and its handling marker is oxidation rather than moisture: the carrier and the menaquinone both react with oxygen, so the peroxide value is measured at release and watched during storage. The powder is a yellow crystalline solid, practically insoluble in water and soluble in fats and organic solvents. Its catalog limits include loss on drying ≤0.5% and ≥95% through 40 mesh, which describe a dry, milled solid rather than an oil. The low melting range makes it heat-sensitive in a loading bay, and light-sensitive in a clear container. Neither grade is protected by its format. The oil keeps the molecule in solution, fully exposed to the oxygen dissolved in the carrier; the powder keeps it as a solid with a small surface area but picks up moisture when the pack is open. ## From a label dose to a weighable mass A label dose counts menaquinone-4, not the oil or the powder that carries it. Divide the dose by the concentration to get the material weight. At 1% the divisor is small, so the weight is large; at 98% the weight is close to the dose itself. One dose converted to 1% oil and to 98% powder | Label dose | 1% oil | 98% powder | What the number means | 45 µg | 4.1–4.5 mg | 0.098–0.102 mg | The oil is weighable; the powder weight is not | 1 mg | 90.9–100 mg | 0.98–1.02 mg | Both work; the oil is a small fill | 5 mg | 455–500 mg | 4.9–5.1 mg | A softgel for the oil, a small capsule for the powder | 10 mg | 0.91–1.0 g | 9.8–10.2 mg | The oil needs a large softgel | 45 mg | 4.1–4.5 g | 44.1–45.9 mg | The oil fill no longer fits a standard capsule The two grades meet in the region of about 1–10 mg per serving. Below it, the powder weigh becomes too small to control and the oil is the practical choice; above it, the oil mass becomes the constraint and the powder is. The figures are the stoichiometric minimum, before overage and the rest of the fill. Dosage form can override the arithmetic. A softgel needs a liquid fill, so the oil is the natural starting point even where the powder would weigh comfortably. A two-piece capsule or a tablet needs a solid, so the powder is the natural starting point even at a low dose, provided the weigh can be controlled or the powder is pre-diluted. ## Lines to fix in the specification - “Menaquinone-4 (MK-4), CAS 863-61-6, C31H40O2, 1.0–1.1% w/w in a declared food-grade oil.” - “Assay by HPLC with UV detection; identification by retention time and UV spectrum.” - “Peroxide value ≤10.0 meq O₂/kg; acid value and p-anisidine value can be agreed.” - “Carrier identity by fatty-acid profile, with the carrier source and allergen statement.” - “Heavy metals and microbiology as listed; packed in amber bottles.” - “Grade named as the 1% oil, the crystalline powder or the powder on carrier, with the concentration.” For the oil, the carrier, the concentration and the peroxide value are the three lines that must not be left to a data sheet. For the powder, the menadione limit and the melting range can be agreed as additional lines. The format written on the purchase order should be the one the specification describes, not just the product name. ## Where a grade stops working The oil is wrong when the claim is 45 mg, because the fill becomes grams; when the formula is a dry blend, because the oil wets and clumps it; or when the label cannot name the carrier for the destination. The powder is wrong when the claim is 45 µg, because the weigh is below production control; when the fill must be liquid, because a powder does not fill a softgel; or when the powder's dust and static disrupt the line. None of these is a supplier swap. A move between formats calls for a fresh specification, a new fill weight, a label review and stability work on the new matrix. The product hub lists the catalog range; the oil and powder comparison takes the carrier and label questions further; the MK-4 powder page gives the other grade; the MOQ page covers the ordering unit. ### 02.1 MK-4 oil vs MK-4 powder: carrier, overage and the label URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k2-mk4-oil/grades/vitamin-k2-mk4-oil-vs-powder/ Reviewed: 2026-11-20 MK-4 oil and MK-4 powder carry the same menaquinone-4, CAS 863-61-6, but they are not interchangeable. The oil is a 1.0–1.1% solution in a declared carrier; the powder is the isolated substance at 98.0–102.0%. The carrier changes the ingredient list and the allergen review, the concentration changes the mass behind the label, and the two formats need different overages to hold the same claim at the end of shelf life. In one lineThe oil and the powder carry the same menaquinone-4, but the carrier changes the ingredient list, the overage that holds the label claim, and the mass on the label. ## The carrier is the difference In the 1% oil, roughly 99% of the bottle is carrier: a food-grade oil such as soybean oil or a medium-chain triglyceride. That oil is an ingredient, not packaging. It has to be permitted for the use, named in the ingredient list, covered by the allergen and GMO statements, and specified by its own fatty-acid profile. A change of carrier is a change of product, even when the menaquinone-4 figure stays at 1.05%. The isolated powder has no carrier. It is menaquinone-4 at 98.0–102.0%, with loss on drying ≤0.5% and ≥95% through 40 mesh. A “powder on carrier” is a third product: the menaquinone diluted on a solid carrier for microgram doses, with its own concentration, blend-uniformity test and label. Do not read it as a packing option on the isolated powder. The carrier also changes the failure mode. The oil's carrier reacts with oxygen, so the oil carries a peroxide-value limit of ≤10.0 meq O₂/kg; the powder's risk is moisture and heat, so it carries a loss-on-drying limit and a cool, dry storage statement. ## One dose, two masses A label dose counts menaquinone-4. Divide it by the concentration to get the material weight, and the two formats separate quickly: the oil needs about a hundred times the mass of the powder for the same claim. One MK-4 dose converted to 1% oil and to 98% powder | Label dose | Oil at 1.0–1.1% | Powder at 98–102% | Practical reading | 45 µg | 4.1–4.5 mg | 0.098–0.102 mg | The powder weigh is below production control | 1 mg | 90.9–100 mg | 0.98–1.02 mg | Both work; the oil is a small fill | 5 mg | 455–500 mg | 4.9–5.1 mg | A softgel for the oil, a small capsule for the powder | 10 mg | 0.91–1.0 g | 9.8–10.2 mg | The oil fill is growing | 45 mg | 4.1–4.5 g | 44.1–45.9 mg | The oil no longer fits a standard capsule The formats meet in the region of about 1–10 mg per serving. Below it, the powder weigh is too small to distribute evenly; above it, the oil mass is too large for a conventional dosage unit. Those are the minimum weights, before overage and the rest of the fill. ## The dosage form usually decides A softgel, a drop or an oily premix needs a liquid, so the oil is the natural starting point. A two-piece capsule, a tablet or a dry blend needs a solid, so the powder is. Putting an oil into a hard capsule is possible but weak: the join can leak and the oil can migrate into the shell. Putting a powder into a softgel works only if the fill is an oil suspension anyway, which brings the carrier question back. Fill size is the second constraint. A 1 g softgel at 1% oil carries about 10 mg of menaquinone-4; a 45 mg claim would need 4.1–4.5 g of oil, which is outside the usual softgel range. At the other end, a 45 µg claim from the powder needs about 0.1 mg of solid, a weigh no production line controls; that is where the powder on carrier or the oil earns its place. ## The overage is a formulation decision The label declares the amount that must be present at the end of the shelf life, so the fill is set slightly above the claim. That margin is the overage. It is not printed on the label; it is the number that carries the claim to expiry. The oil needs an overage for oxidation and for the blending window. A 20% overage on a 5 mg claim would fill for 6 mg, which is 545–600 mg of oil instead of 455–500 mg, and the softgel grows with it. The powder needs less margin for assay, because its window is tight, but a small weigh leaves little room to adjust; at microgram doses the overage itself becomes hard to weigh. The justified figure comes from stability data on the format, not from a percentage copied from another product. An overage also has a ceiling: a large margin can push a nutrient past a market tolerance or a maximum level, and it costs carrier and capsule space. Set it with the stability file and the label review together. ## The label, format by format Label consequences of the two formats | Label element | 1% oil | 98% powder | Ingredient list | The carrier oil is named | No carrier for the isolated powder | Amount declared | The MK-4 mass; the oil mass is not the declaration | The MK-4 mass | Allergen and GMO | The carrier source drives the statements | No carrier statement for the isolated form | Concentration | Not a label figure; it sets the fill | Not a label figure; it sets the weigh In the US, the Supplement Facts panel names vitamin K and the form, menaquinone-4, and gives the amount in micrograms; the carrier appears in the ingredient list. In the EU, the ingredient list names the oil and the carrier, and the nutrition declaration gives vitamin K in micrograms and as a percentage of the reference value. “MK-4 oil” is a description, not a permitted ingredient name in every market, so the buyer's reviewer confirms the wording. The label declares the menaquinone-4, never the carrier mass as if it were the active. ## What changes when you switch A switch changes the specification, the fill weight, the capsule or tablet size, the ingredient list, the allergen statement, the overage and the stability file. The molecule is the same; the product is not. Handle it as a change control: a new specification, a fresh label review and, where the market is regulated, another look at the route. Do not switch at the balance and adjust the number afterwards. A formula built on 1% oil that is reweighed as 98% powder has a fill about a hundredfold lighter, and a label that still reads “oil” describes a product that is no longer in the bottle. The specifications sit on two product pages, the oil and the powder; the grade page places them in the range; the COA page covers the oil's release tests; the stability page covers the pack; the methods library and the quality page cover the analysis and release. ### 03 MK-4 oil is oxygen- and light-sensitive; the bottle sets the shelf life URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k2-mk4-oil/stability/ Reviewed: 2026-11-20 Vitamin K2 MK-4 in a 1% oil degrades by oxidation, and a lot can fail on peroxide value while the assay still reads inside 1.0–1.1%. The menaquinone and the carrier oil both react with oxygen, and the first measurable sign is a rising peroxide value; light and heat accelerate the reaction, and the headspace in the bottle is the oxygen reservoir. The catalog limits are assay 1.0–1.1% and peroxide value ≤10.0 meq O₂/kg, and the shelf life comes from stability work on the exact pack. In one lineAn MK-4 oil can fail by oxidation before the assay moves, so the bottle, the headspace and the storage temperature set the shelf life more than the molecule does. ## The bottle: oxygen, light and moisture The standard pack is an amber bottle, and the amber glass is a light barrier rather than a seal. The closure is the seal, and the headspace above the oil is the oxygen that reacts first. A bottle with a large headspace, or one opened and closed several times in a dispensary, gives the oil fresh oxygen at every turn. Moisture matters less for the oil itself, which is hydrophobic, and more for what the oil meets. An emulsion, a water-containing carrier or a softgel shell brings water into contact with the fat, and hydrolysis raises the free fatty acid. A cold bottle should reach room temperature before it is opened, so that water does not condense on the surface or inside the closure. Heat is the third variable, and it acts on both reactions. A bottle left in a warm loading bay, a car or a greenhouse oxidises faster than one held in a cool store. The pack should stay closed, upright and dark between uses, and the in-use period should be short enough that the last portion is still inside the specification. ## The oil is already a solution In the 1% oil, menaquinone-4 is dissolved in a triglyceride carrier. There is no crystal to protect and no particle surface to coat; the molecule is in contact with the carrier and with dissolved oxygen throughout the liquid. That is convenient for filling and less convenient for stability, because every part of the oil is exposed at once. The dilution does not stabilise the menaquinone. It adds a second oxidisable material: about 99% of the bottle is carrier, and the carrier's own unsaturation decides how quickly hydroperoxides form. A polyunsaturated soybean oil and a more saturated medium-chain triglyceride behave differently in the same bottle, so the carrier belongs in the stability discussion, not only in the ingredient list. An antioxidant such as tocopherol can be added to slow the reaction, and it must be declared as an ingredient. It delays the rise in peroxide value; it does not stop it, and it does not repair an oil that was already oxidised when it was filled. The antioxidant, its level and its label position are part of the specification. ## What ages the oil Factors that move a 1% MK-4 oil during storage | Pressure | Effect | Countermeasure | Oxygen | Forms hydroperoxides; peroxide value rises | Sealed bottle; small headspace; modified atmosphere where agreed | Light | Bleaches the colour; drives the assay down | Amber bottle; dark store; closed carton | Heat | Accelerates oxidation and hydrolysis | Cool store; controlled process temperature | Carrier unsaturation | More double bonds oxidise faster | Carrier specification; antioxidant | Metal ions | Catalyse hydroperoxide breakdown | Avoid iron and copper contact; check pumps and lines | Water in an emulsion | Hydrolysis; free fatty acid rises | Dry carrier; emulsion and pH control These pressures combine. A warm, bright bottle with a large headspace can age faster than three separate stresses would suggest, and an emulsion adds water and an interface to the list. The question is not whether MK-4 is stable in the abstract, but how long this oil stays inside its specification in this pack at this condition. ## Designing the stability run A workable design names the pack, the storage condition, the sampling points and the tests. For warehouse conditions, 25 °C/60% relative humidity is the long-term arm and 30 °C/65% the intermediate one; 40 °C/75% is the accelerated arm that stresses the pack. Add a light-exposure arm, because a dark incubator cannot show a photostability failure. Test assay, peroxide value, p-anisidine value, free fatty acid, appearance and microbiology at each point. Peroxide value alone can be misleading, because hydroperoxides break down into aldehydes as the oil ages and the peroxide figure can fall while the oil is getting worse. The anisidine value catches that second stage, and the pair reads better than either number alone. Each report should list the individual results rather than a pass statement, and name the pack and the lot family. A bottle and a softgel are different packs with different headspace, different oxygen transmission and different opening histories, so data from one does not answer for the other. ## The matrix adds its own risks A softgel carries the oil inside a shell that limits oxygen and light, and the shell's own ingredients and thickness are part of the barrier. The fill mass, the overage and the shell all belong in the stability file. A two-piece capsule is a weaker pack for an oil: the join can leak, and the oil can migrate into the shell, so an oil is usually filled into a sealed softgel rather than a hard capsule. An emulsion or a drink brings water, pH, homogenisation and a heat load. Bulk oil data is where the work starts, not where it ends. The formulator sets any overage; that choice belongs with the label and the stability results, and it cannot rescue a pack that admits oxygen. ## Assigning a retest period No single shelf-life figure covers every MK-4 oil pack, because the pack and the storage condition decide it. The retest period is written into the specification and backed by stability data for that pack. A shelf-life figure with no pack, no storage condition and no test panel behind it is an assertion rather than a fact. An unopened amber bottle and one opened weekly are different storage cases, and a softgel in a blister is a third. When the retest period ends, re-assay the retained sample before extending the period; a bulk figure should not be assumed for a repacked container. Pack options are on the product hub. Release tests are on the COA page; ordering quantities on the MOQ page; the assay on the HPLC note; release on the quality page. ### 04 Vitamin K2 MK-4 oil: MOQ, packaging and ordering URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k2-mk4-oil/moq/ Reviewed: 2026-11-20 Vitamin K2 MK-4 1% oil starts at 1 kg in an amber bottle, with a 5 kg amber bottle as the bulk pack. The standard pack ships in 1–7 days. One kilogram carries about 10 g of menaquinone-4, which is a very large number of microgram servings, so the minimum is set by lot identity and sampling rather than by dose volume. In one lineOne kilogram of 1% oil carries about 10 g of menaquinone-4, so the minimum is set by lot identity and sampling, not by the dose. ## What sets the 1 kg minimum At 1.0–1.1% the kilogram holds 10–11 g of menaquinone-4. At a 45 µg serving that is more than 200,000 servings; at 5 mg it is about 2,000. The bottle is not a dose pack and is not sized to a production run. It is the smallest unit that can be filled, labelled, certified and sampled as a lot. Under a kilogram, the oil is usually drawn from a bigger lot and repacked. The extra handling breaks the tie between certificate and bottle and loses the original pack identity, while the oil itself is unchanged. The 5 kg bottle cuts handling per kilogram, yet it ties up stock for longer; oil in storage gains peroxide value, so the bigger pack is not automatically the easier one to use up. ## Packs and what the bottle does Standard vitamin K2 MK-4 1% oil packs | Container | Fill | Where it fits | Handling | Amber bottle | 1 kg | Trial, qualification, small batch | Light barrier; headspace above the oil; reseal after opening | Amber bottle | 5 kg | Production runs | Same barrier; plan the in-use period before opening The amber glass is a light barrier, and the closure is the seal. The oil is not protected by a foil layer the way a powder is, so the headspace and the number of openings matter. Keep the bottle upright and closed, store it dark and cool, and use the contents within the agreed in-use period. A different pack can be quoted, but it is a different specification item with its own stability evidence. ## Dispatch and transit The standard pack leaves in 1–7 days after the order is confirmed. That covers picking, paperwork and dispatch; transit, customs and the customer's own release sit outside it. A non-standard pack or a different carrier takes longer, and the quotation should say so. Get the dispatch date in writing, not only the range. The 1 kg bottle travels as a parcel and the 5 kg bottle as a pallet; the Incoterm fixes who books the freight and who handles clearance. Send the COA and the other lot papers with the shipment, not after it. Heat is the transit hazard for an oil: a bottle left on a hot dock or in a closed van can arrive with a higher peroxide value than it left with. ## What a firm quotation contains Six details turn a quotation into something comparable: - The material. Vitamin K2 MK-4 1% oil, CAS 863-61-6, with the carrier written out. - The specification. Concentration and method, peroxide value, metals and micro. - Volume and container. A 1 kg or 5 kg amber bottle, or a pack quoted on its own. - Where it goes. Country, address or port, and the trade term. - The paperwork. COA, specification, TDS, SDS and any statement the importer's market asks for. - The end use. Softgel, oil blend or another application, and the country of sale. A quote that omits the carrier and the market cannot be checked. One concentration may be acceptable in one country and outside the file in another, and the carrier statement is part of what is being sold. Terms belong on the quotation, not here. ## A sample that carries its lot code The first 1 kg bottle is the lot you qualify. Mix the oil before drawing a sample, because the surface in contact with the headspace can oxidise ahead of the bulk, and take the sample after mixing rather than from the top. Test assay, peroxide value, p-anisidine value, free fatty acid and microbiology, and ask for the fatty-acid profile if the carrier identity matters. Keep part of the same bottle as the retained sample. The lot code must be the same on the sample, the COA and the quotation. Without that link the sample is only a demonstration. A trial needing less than a kilogram is drawn from a bulk lot, carries its own handling record and is not the 1 kg amber bottle. ## Points to agree before ordering Put the commercial and quality points in one place: Incoterm, pack size, dispatch window, specification revision, a retained sample, a COA for every lot, the retest period and how a carrier or source change is handled. Agree them before the first production order, when the discussion is still easy. Oil changes after it leaves the plant, so agree how peroxide value is treated on arrival. Name the method, the referee laboratory both sides accept and who carries the cost of a re-test. A lot outside the limit is settled on the retained sample with a joint test, not on a photograph of the bottle. A return argued from colour alone is difficult to sustain. The product hub lists the catalog limits; release tests are on the COA page; market files are on the compliance page; the MOQ glossary defines the term; shipping and documents are on the logistics page. ### 05 The regulatory file for vitamin K2 MK-4 oil URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k2-mk4-oil/compliance/ Reviewed: 2026-11-20 Vitamin K2 MK-4 is menaquinone-4, CAS 863-61-6, supplied as a 1% oil in a declared carrier. The EU novel-food entry for vitamin K2 rests on menaquinone-7, so an MK-4 oil does not inherit that file, and the route for the destination has to be confirmed by the buyer's regulatory team. The checks and documents below are what the folder should contain; this page is not a legal opinion. In one lineThe MK-7 novel-food entry does not cover an MK-4 oil, so the route, the carrier declaration and the label are confirmed for the destination before the order. ## Four questions, one folder A regulatory file answers four separate questions. Does the substance, at this dose, have a route into the market? Does the lot meet the specification that route names? Does the label carry the permitted name, unit and declarations? And is every claim on the pack allowed for this ingredient and this market? A certificate speaks only to the second. For an oil there is a fifth item inside the first question: the carrier. The bottle is not menaquinone-4 alone; it is a blend of the menaquinone with a food-grade oil, and that oil is an ingredient in its own right. It must be permitted for the use, declared on the label, and covered by the allergen and GMO statements. A file that names only MK-4 has described part of the product. ## European Union Regulation (EU) 2017/2470 establishes the Union list of novel foods. The vitamin K2 entry is framed around menaquinone-7, with an assay range, an all-trans floor and a cap on cis isomers; its description of the homologous series reaches the MK-4 formula. Whether an MK-4 ingredient can lean on that entry, or needs a different route, is for the buyer's regulatory team to decide against the consolidated text; this summary is not the authority. Food supplements follow a separate framework: Directive 2002/46/EC names vitamin K among the vitamins that may be used and lists permitted forms in its annexes. Whether this particular form can be sold as a vitamin depends on the current text and the member state's own rules. The carrier oil needs its own permission as a food ingredient, and any national position on the menaquinone belongs in the file as well. Dose is part of the review. The EU reference value for vitamin K is 75 µg; a 45 µg serving is 60% of it, while a 5 mg serving is more than 6,000% of it. The same substance at those two doses is not the same regulatory question. ## United States In the United States, an MK-4 oil sits in the dietary-supplement market under DSHEA. The supplier states whether the ingredient was marketed before 15 October 1994 or is supported by a new dietary ingredient notification, and the buyer checks that the basis reaches the finished product. cGMPs for dietary supplements sit in 21 CFR 111, and the panel layout in 21 CFR 101.36. Vitamin K is declared in micrograms on that panel, so a 5 mg serving appears as 5,000 µg, which is more than 4,000% of the 120 µg daily value. That is a unit conversion, not a different dose, and it is the kind of figure a reviewer notices. The carrier oil appears in the ingredient list, and a soy-derived carrier brings an allergen review and a GMO statement with it. ## United Kingdom Great Britain keeps its own retained novel-food list and its own supplement and labelling rules. The GB list began as a copy of the EU list but can drift as either side amends its text, so it needs its own check. Northern Ireland follows EU rules under the Windsor Framework, and a GB-only review leaves that market uncovered. ## The limits in the file Catalog limits and what the compliance file should show | Item | Catalog limit | Evidence for the file | Heavy metals | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | Measured result per element, method and finished-product calculation | Peroxide value | ≤10.0 meq O₂/kg | Measured figure with the test date and the in-use period | Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Method and count for the lot | Carrier identity | The declared food-grade oil | Fatty-acid profile, carrier source and allergen statement The table gives catalog release limits; it does not say that every market applies the same legal ceiling. Contaminant limits are set per destination, and the finished-product figure depends on the dose. Peroxide value is a quality limit rather than a legal one, but a market review of an oxidised oil still reviews the product as sold. ## Where the claim boundary sits For the EU, nutrition and health claims sit under Regulation (EC) No 1924/2006 and the EU Register, as of this review. A wording is usable only if it is on the Register, matches the conditions of use and avoids a disease claim. Vitamin K does appear on the Register, but no wording is quoted or relied on here; the brand's reviewer decides what is available for its product, form and dose. “Menaquinone-4”, “MK-4” and the assay figure are specification terms, not claims. In the US the claim review follows the structure/function boundary, with the DSHEA disclaimer and no disease claim. A wording cleared in one country is not cleared in another, and revising a claim does not reopen the specification. ## The document set Documents a brand should hold for an MK-4 oil lot | Document | What it should establish | Certificate of analysis | Lot code, concentration and method, peroxide value, contaminants, microbiology | Specification | The release limits the certificate is judged against | Technical data sheet | Concentration, carrier, solubility, pack and storage | Safety data sheet | Handling, transport and storage classification | Allergen and GMO statements | The carrier source and any declaration the market requires | Carrier source statement | Which oil, from which source, under which specification | Regulatory position statement | How the ingredient maps to the route relied on for the destination ## A short checklist - Does the file name menaquinone-4, the CAS number and the carrier? - Does the certificate meet the specification on its stated basis? - Is the route confirmed for the destination and the daily dose? - Is the carrier permitted and declared for that market? - Is the label using the permitted name and unit for that market? - Is every claim on the pack permitted for this form and market? - Is the same lot code on the COA, the bottle label and the retained sample? The specification is on the product page, the certificate on the COA page, the grade question on the grades page, and the other menaquinone form on the MK-4 powder page. Framework references are gathered in the EU regulatory notes, and the quality page covers release. ### 06 How we prove a vitamin K2 MK-4 oil lot is menaquinone-4 URL: https://nutrition.rainwoodbio.com/products/vitamins/vitamin-k2-mk4-oil/identity/ Reviewed: 2026-11-20 An MK-4 1% oil lot is menaquinone-4 in a declared carrier when four figures agree: HPLC retention and UV spectrum match a menaquinone-4 reference, the concentration sits inside 1.0–1.1%, the peroxide value shows an oil still inside its limit, and the fatty-acid profile matches the declared carrier. The document names the substance and the carrier, but it does not prove the oil on its own. The assay alone cannot show whether the oil is fresh or whether the carrier is the declared one. In one lineAn MK-4 oil is proved by four agreeing figures: the chromatogram and its UV spectrum, the concentration against a standard, the peroxide value, and the fatty-acid profile of that carrier. ## What has to agree A sheet can carry the right name and still not prove the oil. Each item below is a separate question, and an answer to the first alone describes paperwork. Five checks for a 1% MK-4 oil | Check | Question | Method | What it shows | Document | Are the substance and the carrier named? | Name, CAS number, carrier | Paperwork only | Chromatography | Is the menaquinone MK-4? | HPLC retention and UV spectrum | The molecule, not the strength | Concentration | Is the blend strength as declared? | HPLC against a standard; mass balance | The declared percentage | Carrier | Is the oil the declared oil? | Fatty-acid profile by GC | The carrier identity | Freshness | Is the oil in good condition? | Peroxide value, p-anisidine value, free fatty acid | Condition, not identity ## The ratio: menaquinone to carrier, and trans to cis The blend is a ratio before it is anything else: about one part menaquinone-4 to 99 parts carrier. At 1.0–1.1% that is 10–11 mg of MK-4 per gram, and a result of 0.8% is not “close enough” for a 1% claim, because every serving would be a fifth short. A result above the range is also a problem, since it changes the dose arithmetic and the label. The second ratio sits inside the molecule. The menaquinone side chain carries a double bond that can be trans or cis, and the all-trans configuration is the one the reference standard describes. Light and heat can isomerise part of a lot, and a total assay can stay inside 1.0–1.1% while the all-trans share falls. If the form matters to the buyer, the all-trans share is agreed as a line and reported with its method. The mass balance is the third ratio. The assay, the carrier and the minor components should add to 100%; a lot with 1.05% MK-4 and a high peroxide value still has the right concentration, but the carrier has changed. That is why the concentration and the oxidation panel are read together rather than as one number. ## X-ray diffraction: a limited role for an oil X-ray diffraction reads a crystal lattice. In a 1% oil, menaquinone-4 is dissolved and the carrier is liquid at room temperature, so there is no MK-4 lattice to diffract and no pattern that identifies the molecule. A certificate line that says “XRD conforms” on an oil has proved very little, and a buyer should not accept it in place of a chromatogram. XRD has a use when the question is solid form. It can compare a crystalline MK-4 reference with an isolated powder, show whether a carrier is partly crystalline, or detect a crystalline foreign solid in an oil. Even then, ask for the reference diffractogram and the limit of detection before accepting a “match”. For this product the routine identity tests are HPLC with UV and the carrier profile, not diffraction. ## Signals of a substitution Substitutions in a 1% MK-4 oil and how they show | Substitute | Effect | Sign | Method | Extra carrier | Lowers the concentration and shortens the dose | Assay below 1.0%; mass balance off | HPLC against a standard | Another menaquinone | Similar colour, different homologue | Retention time or spectrum differs | HPLC/UV, LC-MS | Substitute carrier oil | Changes the declared ingredient | Fatty-acid profile and cloud point differ | GC fatty-acid profile | Oxidised oil | Blends old oil with fresh | Peroxide, anisidine and free fatty acid high | Oxidation panel | Dye | Imitates the yellow colour | Colour but no UV match | UV spectrum, HPLC Appearance is the least reliable sign: the yellow-to-amber window is broad and a dye can imitate it. Trust the chromatogram, the concentration against the standard, the carrier's fatty-acid profile and the oxidation panel instead. A sheet with appearance and assay but no identity work has skipped the substitution most likely to occur. ## Identity lines for the specification - “Menaquinone-4 (MK-4), CAS 863-61-6, C31H40O2, 1.0–1.1% w/w in a declared food-grade oil.” - “Identification by HPLC retention time and UV spectrum against a menaquinone-4 reference.” - “Assay by HPLC with UV detection, reported on the oil as sold.” - “Carrier identity by fatty-acid profile, with the source, allergen and GMO statements.” - “Peroxide value ≤10.0 meq O₂/kg; p-anisidine value and free fatty acid can be agreed.” - “All-trans share of the menaquinone, if agreed, with the method and limit.” ## What to ask before you buy - Which carrier oil does this lot use, and what is its fatty-acid profile? - Will you send the chromatogram and the UV spectrum, not just the assay figure? - What are the peroxide, p-anisidine and free fatty acid results, with their test dates? - What is the all-trans share of the menaquinone, and how was it measured? - If a result is disputed, would you join a re-test on the retained sample? Straight answers to those five questions add up to an identity file. Catalog limits are on the product hub; the COA page maps each figure to a certificate line; the grade page compares the oil with the isolated powder; the HPLC method note explains the separation; the quality page covers the release file. ## Editorial boundary No prices, no placeholder data, no therapeutic or disease claims, no borrowed certificates, no invented customer names or volumes. Regulatory statements are dated and scoped to the named market. Contact: info@rainwoodbio.com.